Predicting fecal coliform using the interval-to-interval approach and SWAT in the Miyun watershed, China.

Science.gov (United States)

Bai, Jianwen; Shen, Zhenyao; Yan, Tiezhu; Qiu, Jiali; Li, Yangyang

2017-06-01

Pathogens in manure can cause waterborne-disease outbreaks, serious illness, and even death in humans. Therefore, information about the transformation and transport of bacteria is crucial for determining their source. In this study, the Soil and Water Assessment Tool (SWAT) was applied to simulate fecal coliform bacteria load in the Miyun Reservoir watershed, China. The data for the fecal coliform were obtained at three sampling sites, Chenying (CY), Gubeikou (GBK), and Xiahui (XH). The calibration processes of the fecal coliform were conducted using the CY and GBK sites, and validation was conducted at the XH site. An interval-to-interval approach was designed and incorporated into the processes of fecal coliform calibration and validation. The 95% confidence interval of the predicted values and the 95% confidence interval of measured values were considered during calibration and validation in the interval-to-interval approach. Compared with the traditional point-to-point comparison, this method can improve simulation accuracy. The results indicated that the simulation of fecal coliform using the interval-to-interval approach was reasonable for the watershed. This method could provide a new research direction for future model calibration and validation studies.

Effect of Irrigation Intervals on Some Morphophysiological Traits of Basil (Ocimum basilicum L. Ecotypes

Directory of Open Access Journals (Sweden)

M Goldani

2012-10-01

Full Text Available In order to determine the effect of different irrigation intervals on some morphophysiological traits of basil (Ocimum basilicum L., an experiment was conducted as factorial based on randomized complete block design with three replications under greenhouse conditions during 2010. Treatments included five irrigation intervals with 4, 8, 12, 16 and 20 days intervals and two ecotypes of basil (green and purple. The results showed that by increasing irrigation interval plant height, spike number, spike weight and shoot dry weight between irrigation intervals decreased. Purple basil was more tolerant than basil green ecotype to drought stress. Interaction between irrigation intervals and ecotypes showed that the best treatment related to four days irrigation interval and purple basil ecotype. The effect of irrigation intervals on root area, root diameter mean, total length, root volume and dry weight of root was significant. In all irrigation intervals, purple basil had better performance compared to green ecotype. The results showed that by increasing in irrigation interval decreased root surface area, but increased total root length. It was concluded that increasing irrigation interval up to 12 days decreased shoot and root surface areas. Increasing irrigation interval decreased chlorophyll- a, b and increased prolin amino acid content of basil leaf.

Interval-based reconstruction for uncertainty quantification in PET

Science.gov (United States)

Kucharczak, Florentin; Loquin, Kevin; Buvat, Irène; Strauss, Olivier; Mariano-Goulart, Denis

2018-02-01

A new directed interval-based tomographic reconstruction algorithm, called non-additive interval based expectation maximization (NIBEM) is presented. It uses non-additive modeling of the forward operator that provides intervals instead of single-valued projections. The detailed approach is an extension of the maximum likelihood—expectation maximization algorithm based on intervals. The main motivation for this extension is that the resulting intervals have appealing properties for estimating the statistical uncertainty associated with the reconstructed activity values. After reviewing previously published theoretical concepts related to interval-based projectors, this paper describes the NIBEM algorithm and gives examples that highlight the properties and advantages of this interval valued reconstruction.

Factorial-based response-surface modeling with confidence intervals for optimizing thermal-optical transmission analysis of atmospheric black carbon

International Nuclear Information System (INIS)

Conny, J.M.; Norris, G.A.; Gould, T.R.

2009-01-01

Thermal-optical transmission (TOT) analysis measures black carbon (BC) in atmospheric aerosol on a fibrous filter. The method pyrolyzes organic carbon (OC) and employs laser light absorption to distinguish BC from the pyrolyzed OC; however, the instrument does not necessarily separate the two physically. In addition, a comprehensive temperature protocol for the analysis based on the Beer-Lambert Law remains elusive. Here, empirical response-surface modeling was used to show how the temperature protocol in TOT analysis can be modified to distinguish pyrolyzed OC from BC based on the Beer-Lambert Law. We determined the apparent specific absorption cross sections for pyrolyzed OC (σ Char ) and BC (σ BC ), which accounted for individual absorption enhancement effects within the filter. Response-surface models of these cross sections were derived from a three-factor central-composite factorial experimental design: temperature and duration of the high-temperature step in the helium phase, and the heating increase in the helium-oxygen phase. The response surface for σ BC , which varied with instrument conditions, revealed a ridge indicating the correct conditions for OC pyrolysis in helium. The intersection of the σ BC and σ Char surfaces indicated the conditions where the cross sections were equivalent, satisfying an important assumption upon which the method relies. 95% confidence interval surfaces defined a confidence region for a range of pyrolysis conditions. Analyses of wintertime samples from Seattle, WA revealed a temperature between 830 deg. C and 850 deg. C as most suitable for the helium high-temperature step lasting 150 s. However, a temperature as low as 750 deg. C could not be rejected statistically

On the maximum of wave surface of sea waves

Energy Technology Data Exchange (ETDEWEB)

Zhang, B

1980-01-01

This article considers wave surface as a normal stationary random process to solve the estimation of the maximum of wave surface in a given time interval by means of the theoretical results of probability theory. The results are represented by formulas (13) to (19) in this article. It was proved in this article that when time interval approaches infinite, the formulas (3), (6) of E )eta max) that were derived from the references (Cartwright, Longuet-Higgins) can also be derived by asymptotic distribution of the maximum of wave surface provided by the article. The advantage of the results obtained from this point of view as compared with the results obtained from the references was discussed.

Delay-Dependent Guaranteed Cost Control of an Interval System with Interval Time-Varying Delay

Directory of Open Access Journals (Sweden)

Xiao Min

2009-01-01

Full Text Available This paper concerns the problem of the delay-dependent robust stability and guaranteed cost control for an interval system with time-varying delay. The interval system with matrix factorization is provided and leads to less conservative conclusions than solving a square root. The time-varying delay is assumed to belong to an interval and the derivative of the interval time-varying delay is not a restriction, which allows a fast time-varying delay; also its applicability is broad. Based on the Lyapunov-Ktasovskii approach, a delay-dependent criterion for the existence of a state feedback controller, which guarantees the closed-loop system stability, the upper bound of cost function, and disturbance attenuation lever for all admissible uncertainties as well as out perturbation, is proposed in terms of linear matrix inequalities (LMIs. The criterion is derived by free weighting matrices that can reduce the conservatism. The effectiveness has been verified in a number example and the compute results are presented to validate the proposed design method.

Modal interval analysis new tools for numerical information

CERN Document Server

Sainz, Miguel A; Calm, Remei; Herrero, Pau; Jorba, Lambert; Vehi, Josep

2014-01-01

This book presents an innovative new approach to interval analysis. Modal Interval Analysis (MIA) is an attempt to go beyond the limitations of classic intervals in terms of their structural, algebraic and logical features. The starting point of MIA is quite simple: It consists in defining a modal interval that attaches a quantifier to a classical interval and in introducing the basic relation of inclusion between modal intervals by means of the inclusion of the sets of predicates they accept. This modal approach introduces interval extensions of the real continuous functions, identifies equivalences between logical formulas and interval inclusions, and provides the semantic theorems that justify these equivalences, along with guidelines for arriving at these inclusions. Applications of these equivalences in different areas illustrate the obtained results. The book also presents a new interval object: marks, which aspire to be a new form of numerical treatment of errors in measurements and computations.

Influence Of Inspection Intervals On Mechanical System Reliability

International Nuclear Information System (INIS)

Zilberman, B.

1998-01-01

In this paper a methodology of reliability analysis of mechanical systems with latent failures is described. Reliability analysis of such systems must include appropriate usage of check intervals for latent failure detection. The methodology suggests, that based on system logic the analyst decides at the beginning if a system can fail actively or latently and propagates this approach through all system levels. All inspections are assumed to be perfect (all failures are detected and repaired and no new failures are introduced as a result of the maintenance). Additional assumptions are that mission time is much smaller, than check intervals and all components have constant failure rates. Analytical expressions for reliability calculates are provided, based on fault tree and Markov modeling techniques (for two and three redundant systems with inspection intervals). The proposed methodology yields more accurate results than are obtained by not using check intervals or using half check interval times. The conventional analysis assuming that at the beginning of each mission system is as new, give an optimistic prediction of system reliability. Some examples of reliability calculations of mechanical systems with latent failures and establishing optimum check intervals are provided

QT Interval Adaption to RR Interval Changes and Correlation Analysis between Heart Rate Variability and QT Interval Variability%QT间期对RR间期变化的响应及HRV与QTV的关联性分析

Institute of Scientific and Technical Information of China (English)

朱逸; 杨啸林; 彭屹

2013-01-01

体表心电图作为无创和连续的监测手段,在心脏安全评测方面具有重要而不可替代的位置.心电图中的间期时间序列包含着重要信息,其中以反映心动周期的RR间期序列,以及以QT间期为代表的反映心室复极化时程的间期序列,在临床上最为基础,相关的研究具有更为重要的意义.文中从应用基础研究的角度,就QT间期对于RR间期变化的响应,以及心率变异性(HRV)和QT间期变异性(QTV)关联性分析,分别介绍了其分析方法和研究进展,并且展望了可能的应用前景.%As a noninvasive and continuous monitoring method, surface electrocardiogram is significant in evaluating cardiac safety. The time interval series extracted from surface electrocardiogran contain important information. The RR and QT interval series, representing the cardiac cycle and the duration of ventricular repolarization, are with more research value. From the perspective of applied basic research, the methods and progress, concerning the QT interval adaption to RR interval changes and correlation analysis between heart rale variability (HRV) and QT interval variability (QTV) , were introduced here. And their potential applications were discussed as well.

Delay-Dependent Guaranteed Cost H∞ Control of an Interval System with Interval Time-Varying Delay

Directory of Open Access Journals (Sweden)

Zhongke Shi

2009-01-01

Full Text Available This paper concerns the problem of the delay-dependent robust stability and guaranteed cost H∞ control for an interval system with time-varying delay. The interval system with matrix factorization is provided and leads to less conservative conclusions than solving a square root. The time-varying delay is assumed to belong to an interval and the derivative of the interval time-varying delay is not a restriction, which allows a fast time-varying delay; also its applicability is broad. Based on the Lyapunov-Ktasovskii approach, a delay-dependent criterion for the existence of a state feedback controller, which guarantees the closed-loop system stability, the upper bound of cost function, and disturbance attenuation lever for all admissible uncertainties as well as out perturbation, is proposed in terms of linear matrix inequalities (LMIs. The criterion is derived by free weighting matrices that can reduce the conservatism. The effectiveness has been verified in a number example and the compute results are presented to validate the proposed design method.

Inhibition of fungal colonization by Pseudoalteromonas tunicata provides a competitive advantage during surface colonization.

Science.gov (United States)

Franks, A; Egan, S; Holmström, C; James, S; Lappin-Scott, H; Kjelleberg, S

2006-09-01

The marine epiphytic bacterium Pseudoalteromonas tunicata produces a range of extracellular secondary metabolites that inhibit an array of common fouling organisms, including fungi. In this study, we test the hypothesis that the ability to inhibit fungi provides P. tunicata with an advantage during colonization of a surface. Studies on a transposon-generated antifungal-deficient mutant of P. tunicata, FM3, indicated that a long-chain fatty acid-coenzyme A ligase is involved in the production of a broad-range antifungal compound by P. tunicata. Flow cell experiments demonstrated that production of an antifungal compound provided P. tunicata with a competitive advantage against a marine yeast isolate during surface colonization. This compound enabled P. tunicata to disrupt an already established fungal biofilm by decreasing the number of yeast cells attached to the surface by 66% +/- 9%. For in vivo experiments, the wild-type and FM3 strains of P. tunicata were used to inoculate the surface of the green alga Ulva australis. Double-gradient denaturing gradient gel electrophoresis analysis revealed that after 48 h, the wild-type P. tunicata had outcompeted the surface-associated fungal community, whereas the antifungal-deficient mutant had no effect on the fungal community. Our data suggest that P. tunicata is an effective competitor against fungal surface communities in the marine environment.

Convex Interval Games

NARCIS (Netherlands)

Alparslan-Gok, S.Z.; Brânzei, R.; Tijs, S.H.

2008-01-01

In this paper, convex interval games are introduced and some characterizations are given. Some economic situations leading to convex interval games are discussed. The Weber set and the Shapley value are defined for a suitable class of interval games and their relations with the interval core for

INTERVAL STATE ESTIMATION FOR SINGULAR DIFFERENTIAL EQUATION SYSTEMS WITH DELAYS

Directory of Open Access Journals (Sweden)

T. A. Kharkovskaia

2016-07-01

Full Text Available The paper deals with linear differential equation systems with algebraic restrictions (singular systems and a method of interval observer design for this kind of systems. The systems contain constant time delay, measurement noise and disturbances. Interval observer synthesis is based on monotone and cooperative systems technique, linear matrix inequations, Lyapunov function theory and interval arithmetic. The set of conditions that gives the possibility for interval observer synthesis is proposed. Results of synthesized observer operation are shown on the example of dynamical interindustry balance model. The advantages of proposed method are that it is adapted to observer design for uncertain systems, if the intervals of admissible values for uncertain parameters are given. The designed observer is capable to provide asymptotically definite limits on the estimation accuracy, since the interval of admissible values for the object state is defined at every instant. The obtained result provides an opportunity to develop the interval estimation theory for complex systems that contain parametric uncertainty, varying delay and nonlinear elements. Interval observers increasingly find applications in economics, electrical engineering, mechanical systems with constraints and optimal flow control.

GPM Mission Gridded Text Products Providing Surface Precipitation Retrievals

Science.gov (United States)

Stocker, Erich Franz; Kelley, Owen; Huffman, George; Kummerow, Christian

2015-04-01

In February 2015, the Global Precipitation Measurement (GPM) mission core satellite will complete its first year in space. The core satellite carries a conically scanning microwave imager called the GPM Microwave Imager (GMI), which also has 166 GHz and 183 GHz frequency channels. The GPM core satellite also carries a dual frequency radar (DPR) which operates at Ku frequency, similar to the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar), and a new Ka frequency. The precipitation processing system (PPS) is producing swath-based instantaneous precipitation retrievals from GMI, both radars including a dual-frequency product, and a combined GMI/DPR precipitation retrieval. These level 2 products are written in the HDF5 format and have many additional parameters beyond surface precipitation that are organized into appropriate groups. While these retrieval algorithms were developed prior to launch and are not optimal, these algorithms are producing very creditable retrievals. It is appropriate for a wide group of users to have access to the GPM retrievals. However, for reseachers requiring only surface precipitation, these L2 swath products can appear to be very intimidating and they certainly do contain many more variables than the average researcher needs. Some researchers desire only surface retrievals stored in a simple easily accessible format. In response, PPS has begun to produce gridded text based products that contain just the most widely used variables for each instrument (surface rainfall rate, fraction liquid, fraction convective) in a single line for each grid box that contains one or more observations. This paper will describe the gridded data products that are being produced and provide an overview of their content. Currently two types of gridded products are being produced: (1) surface precipitation retrievals from the core satellite instruments - GMI, DPR, and combined GMI/DPR (2) surface precipitation retrievals for the partner

Overconfidence in Interval Estimates

Science.gov (United States)

Soll, Jack B.; Klayman, Joshua

2004-01-01

Judges were asked to make numerical estimates (e.g., "In what year was the first flight of a hot air balloon?"). Judges provided high and low estimates such that they were X% sure that the correct answer lay between them. They exhibited substantial overconfidence: The correct answer fell inside their intervals much less than X% of the time. This…

Interval MULTIMOORA method with target values of attributes based on interval distance and preference degree: biomaterials selection

Science.gov (United States)

Hafezalkotob, Arian; Hafezalkotob, Ashkan

2017-06-01

A target-based MADM method covers beneficial and non-beneficial attributes besides target values for some attributes. Such techniques are considered as the comprehensive forms of MADM approaches. Target-based MADM methods can also be used in traditional decision-making problems in which beneficial and non-beneficial attributes only exist. In many practical selection problems, some attributes have given target values. The values of decision matrix and target-based attributes can be provided as intervals in some of such problems. Some target-based decision-making methods have recently been developed; however, a research gap exists in the area of MADM techniques with target-based attributes under uncertainty of information. We extend the MULTIMOORA method for solving practical material selection problems in which material properties and their target values are given as interval numbers. We employ various concepts of interval computations to reduce degeneration of uncertain data. In this regard, we use interval arithmetic and introduce innovative formula for interval distance of interval numbers to create interval target-based normalization technique. Furthermore, we use a pairwise preference matrix based on the concept of degree of preference of interval numbers to calculate the maximum, minimum, and ranking of these numbers. Two decision-making problems regarding biomaterials selection of hip and knee prostheses are discussed. Preference degree-based ranking lists for subordinate parts of the extended MULTIMOORA method are generated by calculating the relative degrees of preference for the arranged assessment values of the biomaterials. The resultant rankings for the problem are compared with the outcomes of other target-based models in the literature.

Inhibition of Fungal Colonization by Pseudoalteromonas tunicata Provides a Competitive Advantage during Surface Colonization†

Science.gov (United States)

Franks, A.; Egan, S.; Holmström, C.; James, S.; Lappin-Scott, H.; Kjelleberg, S.

2006-01-01

The marine epiphytic bacterium Pseudoalteromonas tunicata produces a range of extracellular secondary metabolites that inhibit an array of common fouling organisms, including fungi. In this study, we test the hypothesis that the ability to inhibit fungi provides P. tunicata with an advantage during colonization of a surface. Studies on a transposon-generated antifungal-deficient mutant of P. tunicata, FM3, indicated that a long-chain fatty acid-coenzyme A ligase is involved in the production of a broad-range antifungal compound by P. tunicata. Flow cell experiments demonstrated that production of an antifungal compound provided P. tunicata with a competitive advantage against a marine yeast isolate during surface colonization. This compound enabled P. tunicata to disrupt an already established fungal biofilm by decreasing the number of yeast cells attached to the surface by 66% ± 9%. For in vivo experiments, the wild-type and FM3 strains of P. tunicata were used to inoculate the surface of the green alga Ulva australis. Double-gradient denaturing gradient gel electrophoresis analysis revealed that after 48 h, the wild-type P. tunicata had outcompeted the surface-associated fungal community, whereas the antifungal-deficient mutant had no effect on the fungal community. Our data suggest that P. tunicata is an effective competitor against fungal surface communities in the marine environment. PMID:16957232

The Interval Stability of an Electricity Market Model

Directory of Open Access Journals (Sweden)

Weijuan Wang

2014-01-01

Full Text Available Combined with the electric power market dynamic model put forward by Alvarado, an interval model of electricity markets is established and investigated in this paper pertaining to the range of demand elasticity with suppliers and consumers. The stability of an electricity market framework with demand elasticity interval is analyzed. The conclusions characterizing the interval model provided are derived by constructing a suitable Lyapunov function and using the theory of interval dynamical system in differential equations and matrix inequality theory and so forth. Applying the corollary obtained can judge the system stability by available data about demand elasticity. The obtained results are validated and illustrated by a case example.

Restricted Interval Valued Neutrosophic Sets and Restricted Interval Valued Neutrosophic Topological Spaces

Directory of Open Access Journals (Sweden)

Anjan Mukherjee

2016-08-01

Full Text Available In this paper we introduce the concept of restricted interval valued neutrosophic sets (RIVNS in short. Some basic operations and properties of RIVNS are discussed. The concept of restricted interval valued neutrosophic topology is also introduced together with restricted interval valued neutrosophic finer and restricted interval valued neutrosophic coarser topology. We also define restricted interval valued neutrosophic interior and closer of a restricted interval valued neutrosophic set. Some theorems and examples are cites. Restricted interval valued neutrosophic subspace topology is also studied.

Interval Size and Affect: An Ethnomusicological Perspective

Directory of Open Access Journals (Sweden)

Sarha Moore

2013-08-01

Full Text Available This commentary addresses Huron and Davis's question of whether "The Harmonic Minor Provides an Optimum Way of Reducing Average Melodic Interval Size, Consistent with Sad Affect Cues" within any non-Western musical cultures. The harmonic minor scale and other semitone-heavy scales, such as Bhairav raga and Hicaz makam, are featured widely in the musical cultures of North India and the Middle East. Do melodies from these genres also have a preponderance of semitone intervals and low incidence of the augmented second interval, as in Huron and Davis's sample? Does the presence of more semitone intervals in a melody affect its emotional connotations in different cultural settings? Are all semitone intervals equal in their effect? My own ethnographic research within these cultures reveals comparable connotations in melodies that linger on semitone intervals, centered on concepts of tension and metaphors of falling. However, across different musical cultures there may also be neutral or lively interpretations of these same pitch sets, dependent on context, manner of performance, and tradition. Small pitch movement may also be associated with social functions such as prayer or lullabies, and may not be described as "sad." "Sad," moreover may not connote the same affect cross-culturally.

Programming with Intervals

Science.gov (United States)

Matsakis, Nicholas D.; Gross, Thomas R.

Intervals are a new, higher-level primitive for parallel programming with which programmers directly construct the program schedule. Programs using intervals can be statically analyzed to ensure that they do not deadlock or contain data races. In this paper, we demonstrate the flexibility of intervals by showing how to use them to emulate common parallel control-flow constructs like barriers and signals, as well as higher-level patterns such as bounded-buffer producer-consumer. We have implemented intervals as a publicly available library for Java and Scala.

The space of colored interval exchange transformations with flips

International Nuclear Information System (INIS)

Zaw, Myint

2002-04-01

We study the space Cr(2h, c) of c-colored exchange transformations with flips on 2h-intervals. We describe its relation to the moduli space M g,c *c of non-orientable Riemann surfaces of genus g≥0 with one boundary curve and c≥0 extra points where g=h-c-1. (author)

Controlling grass weeds on hard surfaces

DEFF Research Database (Denmark)

Rask, Anne Merete; Kristoffersen, Palle; Andreasen, Christian

2012-01-01

An experiment was conducted on a specially designed hard surface to study the impact of time interval between flaming treatments on the regrowth and flower production of two grass weeds. The goal of this experiment was to optimize the control of annual bluegrass and perennial ryegrass, both species...... that are very difficult to control without herbicides. Aboveground biomass from 72 plants per treatment was harvested and dry weights were recorded at regular intervals to investigate how the plants responded to flaming. Regrowth of the grasses was measured by harvesting aboveground biomass 2 wk after......, as they did not increase the reduction of aboveground biomass compared with the 7-d treatment interval. Knowledge on the regrowth of grass weeds after flaming treatments provided by this study can help improve recommendations given to road keepers and park managers for management on these weeds. Nomenclature...

Interval sampling methods and measurement error: a computer simulation.

Science.gov (United States)

Wirth, Oliver; Slaven, James; Taylor, Matthew A

2014-01-01

A simulation study was conducted to provide a more thorough account of measurement error associated with interval sampling methods. A computer program simulated the application of momentary time sampling, partial-interval recording, and whole-interval recording methods on target events randomly distributed across an observation period. The simulation yielded measures of error for multiple combinations of observation period, interval duration, event duration, and cumulative event duration. The simulations were conducted up to 100 times to yield measures of error variability. Although the present simulation confirmed some previously reported characteristics of interval sampling methods, it also revealed many new findings that pertain to each method's inherent strengths and weaknesses. The analysis and resulting error tables can help guide the selection of the most appropriate sampling method for observation-based behavioral assessments. © Society for the Experimental Analysis of Behavior.

Probability Distribution for Flowing Interval Spacing

International Nuclear Information System (INIS)

S. Kuzio

2004-01-01

determined from the data. In terms of repository performance, the results of this analysis may underestimate the effect of matrix diffusion processes in SZ transport models. Underestimation of matrix diffusion in the transport modeling would result in more rapid simulated migration of radionuclide mass to the accessible environment and correspondingly higher simulated dose to the reasonably maximally exposed individual in the Total System Performance Assessment-License Application (TSPA-LA) analyses. The flowing interval spacing is appropriate for use in the SZ site-scale transport abstraction model because the 500 m grid block size in the numerical transport model is more than an order of magnitude larger than the expected flowing interval spacing (BSC 2004 [DIRS 170042], Section 6.3.1). Therefore, the use of the developed flowing interval spacing parameter is limited to a numerical grid spacing that is at least an order of magnitude greater than the average flowing interval spacing to ensure a reasonable description of transport behavior in a grid. This analysis report supports several features, events, and processes (FEPs) and contributes to the characterization of the SZ as a natural barrier, which provides evidence related to the capability of the SZ to delay movement of radionuclides through the SZ to the accessible environment

The interval Shapley value of an M/M/1 service system

Directory of Open Access Journals (Sweden)

Cheng-Guo E

2017-09-01

Full Text Available Service systems and their cooperation are one of the most important and hot topics in management and information sciences. To design a reasonable allocation mechanism of service systems is the key issue in the cooperation of service systems. In this paper, we systematically introduce the interval Shapley value as cost allocation of cooperative interval games 〈N, V〉 arising from cooperation in a multi-server service system, and provide an explicit expression for the interval Shapley value of cooperative interval games 〈N, V〉. We construct an interval game 〈N, W〉 of a service system which shares the same value for the grand coalition with the original interval game, by using the characteristic function which is dominated by the function of the original interval game. Finally, we prove that the interval game 〈N, W〉 is concave, which means that the interval Shapley value of the interval game 〈N, W〉 is in the interval core of this interval game, and illustrate this conclusion by using numerical examples.

Pediatric Reference Intervals for Free Thyroxine and Free Triiodothyronine

Science.gov (United States)

Jang, Megan; Guo, Tiedong; Soldin, Steven J.

2009-01-01

Background The clinical value of free thyroxine (FT4) and free triiodothyronine (FT3) analysis depends on the reference intervals with which they are compared. We determined age- and sex-specific reference intervals for neonates, infants, and children 0–18 years of age for FT4 and FT3 using tandem mass spectrometry. Methods Reference intervals were calculated for serum FT4 (n = 1426) and FT3 (n = 1107) obtained from healthy children between January 1, 2008, and June 30, 2008, from Children's National Medical Center and Georgetown University Medical Center Bioanalytical Core Laboratory, Washington, DC. Serum samples were analyzed using isotope dilution liquid chromatography tandem mass spectrometry (LC/MS/MS) with deuterium-labeled internal standards. Results FT4 reference intervals were very similar for males and females of all ages and ranged between 1.3 and 2.4 ng/dL for children 1 to 18 years old. FT4 reference intervals for 1- to 12-month-old infants were 1.3–2.8 ng/dL. These 2.5 to 97.5 percentile intervals were much tighter than reference intervals obtained using immunoassay platforms 0.48–2.78 ng/dL for males and 0.85–2.09 ng/dL for females. Similarly, FT3 intervals were consistent and similar for males and females and for all ages, ranging between 1.5 pg/mL and approximately 6.0 pg/mL for children 1 month of age to 18 years old. Conclusions This is the first study to provide pediatric reference intervals of FT4 and FT3 for children from birth to 18 years of age using LC/MS/MS. Analysis using LC/MS/MS provides more specific quantification of thyroid hormones. A comparison of the ultrafiltration tandem mass spectrometric method with equilibrium dialysis showed very good correlation. PMID:19583487

Differentially Private Confidence Intervals for Empirical Risk Minimization

OpenAIRE

Wang, Yue; Kifer, Daniel; Lee, Jaewoo

2018-01-01

The process of data mining with differential privacy produces results that are affected by two types of noise: sampling noise due to data collection and privacy noise that is designed to prevent the reconstruction of sensitive information. In this paper, we consider the problem of designing confidence intervals for the parameters of a variety of differentially private machine learning models. The algorithms can provide confidence intervals that satisfy differential privacy (as well as the mor...

Flood control project selection using an interval type-2 entropy weight with interval type-2 fuzzy TOPSIS

Science.gov (United States)

Zamri, Nurnadiah; Abdullah, Lazim

2014-06-01

Flood control project is a complex issue which takes economic, social, environment and technical attributes into account. Selection of the best flood control project requires the consideration of conflicting quantitative and qualitative evaluation criteria. When decision-makers' judgment are under uncertainty, it is relatively difficult for them to provide exact numerical values. The interval type-2 fuzzy set (IT2FS) is a strong tool which can deal with the uncertainty case of subjective, incomplete, and vague information. Besides, it helps to solve for some situations where the information about criteria weights for alternatives is completely unknown. Therefore, this paper is adopted the information interval type-2 entropy concept into the weighting process of interval type-2 fuzzy TOPSIS. This entropy weight is believed can effectively balance the influence of uncertainty factors in evaluating attribute. Then, a modified ranking value is proposed in line with the interval type-2 entropy weight. Quantitative and qualitative factors that normally linked with flood control project are considered for ranking. Data in form of interval type-2 linguistic variables were collected from three authorised personnel of three Malaysian Government agencies. Study is considered for the whole of Malaysia. From the analysis, it shows that diversion scheme yielded the highest closeness coefficient at 0.4807. A ranking can be drawn using the magnitude of closeness coefficient. It was indicated that the diversion scheme recorded the first rank among five causes.

Chosen interval methods for solving linear interval systems with special type of matrix

Science.gov (United States)

Szyszka, Barbara

2013-10-01

The paper is devoted to chosen direct interval methods for solving linear interval systems with special type of matrix. This kind of matrix: band matrix with a parameter, from finite difference problem is obtained. Such linear systems occur while solving one dimensional wave equation (Partial Differential Equations of hyperbolic type) by using the central difference interval method of the second order. Interval methods are constructed so as the errors of method are enclosed in obtained results, therefore presented linear interval systems contain elements that determining the errors of difference method. The chosen direct algorithms have been applied for solving linear systems because they have no errors of method. All calculations were performed in floating-point interval arithmetic.

Optimal parallel algorithms for problems modeled by a family of intervals

Science.gov (United States)

Olariu, Stephan; Schwing, James L.; Zhang, Jingyuan

1992-01-01

A family of intervals on the real line provides a natural model for a vast number of scheduling and VLSI problems. Recently, a number of parallel algorithms to solve a variety of practical problems on such a family of intervals have been proposed in the literature. Computational tools are developed, and it is shown how they can be used for the purpose of devising cost-optimal parallel algorithms for a number of interval-related problems including finding a largest subset of pairwise nonoverlapping intervals, a minimum dominating subset of intervals, along with algorithms to compute the shortest path between a pair of intervals and, based on the shortest path, a parallel algorithm to find the center of the family of intervals. More precisely, with an arbitrary family of n intervals as input, all algorithms run in O(log n) time using O(n) processors in the EREW-PRAM model of computation.

Surface-knots in 4-space an introduction

CERN Document Server

Kamada, Seiichi

2017-01-01

This introductory volume provides the basics of surface-knots and related topics, not only for researchers in these areas but also for graduate students and researchers who are not familiar with the field. Knot theory is one of the most active research fields in modern mathematics. Knots and links are closed curves (one-dimensional manifolds) in Euclidean 3-space, and they are related to braids and 3-manifolds. These notions are generalized into higher dimensions. Surface-knots or surface-links are closed surfaces (two-dimensional manifolds) in Euclidean 4-space, which are related to two-dimensional braids and 4-manifolds. Surface-knot theory treats not only closed surfaces but also surfaces with boundaries in 4-manifolds. For example, knot concordance and knot cobordism, which are also important objects in knot theory, are surfaces in the product space of the 3-sphere and the interval. Included in this book are basics of surface-knots and the related topics of classical knots, the motion picture method, surf...

Indirect methods for reference interval determination - review and recommendations.

Science.gov (United States)

Jones, Graham R D; Haeckel, Rainer; Loh, Tze Ping; Sikaris, Ken; Streichert, Thomas; Katayev, Alex; Barth, Julian H; Ozarda, Yesim

2018-04-19

Reference intervals are a vital part of the information supplied by clinical laboratories to support interpretation of numerical pathology results such as are produced in clinical chemistry and hematology laboratories. The traditional method for establishing reference intervals, known as the direct approach, is based on collecting samples from members of a preselected reference population, making the measurements and then determining the intervals. An alternative approach is to perform analysis of results generated as part of routine pathology testing and using appropriate statistical techniques to determine reference intervals. This is known as the indirect approach. This paper from a working group of the International Federation of Clinical Chemistry (IFCC) Committee on Reference Intervals and Decision Limits (C-RIDL) aims to summarize current thinking on indirect approaches to reference intervals. The indirect approach has some major potential advantages compared with direct methods. The processes are faster, cheaper and do not involve patient inconvenience, discomfort or the risks associated with generating new patient health information. Indirect methods also use the same preanalytical and analytical techniques used for patient management and can provide very large numbers for assessment. Limitations to the indirect methods include possible effects of diseased subpopulations on the derived interval. The IFCC C-RIDL aims to encourage the use of indirect methods to establish and verify reference intervals, to promote publication of such intervals with clear explanation of the process used and also to support the development of improved statistical techniques for these studies.

Relation of increased short-term variability of QT interval to congenital long-QT syndrome

DEFF Research Database (Denmark)

Hinterseer, Martin; Beckmann, Britt-Maria; Thomsen, Morten B

2009-01-01

Apart from clinical symptoms the diagnosis and risk stratification in long-QT syndrome (LQTS) is usually based on the surface electrocardiogram. Studies have indicated that not only prolongation of the QT interval but also an increased short-term variability of QT interval (STV(QT)) is a marker...... that an STV(QT) of 4.9 ms was the optimal cut-off value to predict mutation carriers. When incorporating an STV(QT) >4.9 ms for those whose QTc interval was within the normal limits, sensitivity to distinguish mutation carriers increased to 83% with a specificity of 68%, so that another 15 mutation carriers...

Bootstrap Prediction Intervals in Non-Parametric Regression with Applications to Anomaly Detection

Science.gov (United States)

Kumar, Sricharan; Srivistava, Ashok N.

2012-01-01

Prediction intervals provide a measure of the probable interval in which the outputs of a regression model can be expected to occur. Subsequently, these prediction intervals can be used to determine if the observed output is anomalous or not, conditioned on the input. In this paper, a procedure for determining prediction intervals for outputs of nonparametric regression models using bootstrap methods is proposed. Bootstrap methods allow for a non-parametric approach to computing prediction intervals with no specific assumptions about the sampling distribution of the noise or the data. The asymptotic fidelity of the proposed prediction intervals is theoretically proved. Subsequently, the validity of the bootstrap based prediction intervals is illustrated via simulations. Finally, the bootstrap prediction intervals are applied to the problem of anomaly detection on aviation data.

On interval and cyclic interval edge colorings of (3,5)-biregular graphs

DEFF Research Database (Denmark)

Casselgren, Carl Johan; Petrosyan, Petros; Toft, Bjarne

2017-01-01

A proper edge coloring f of a graph G with colors 1,2,3,…,t is called an interval coloring if the colors on the edges incident to every vertex of G form an interval of integers. The coloring f is cyclic interval if for every vertex v of G, the colors on the edges incident to v either form an inte...

Estimation of surface absorptivity in laser surface heating process with experimental data

International Nuclear Information System (INIS)

Chen, H-T; Wu, X-Y

2006-01-01

This study applies a hybrid technique of the Laplace transform and finite-difference methods in conjunction with the least-squares method and experimental temperature data inside the test material to predict the unknown surface temperature, heat flux and absorptivity for various surface conditions in the laser surface heating process. In this study, the functional form of the surface temperature is unknown a priori and is assumed to be a function of time before performing the inverse calculation. In addition, the whole time domain is divided into several analysis sub-time intervals and then these unknown estimates on each analysis interval can be predicted. In order to show the accuracy of the present inverse method, comparisons are made among the present estimates, direct results and previous results, showing that the present estimates agree with the direct results for the simulated problem. However, the present estimates of the surface absorptivity deviate slightly from previous estimated results under the assumption of constant thermal properties. The effect of the surface conditions on the surface absorptivity and temperature is not negligible

Confidence intervals for correlations when data are not normal.

Science.gov (United States)

Bishara, Anthony J; Hittner, James B

2017-02-01

With nonnormal data, the typical confidence interval of the correlation (Fisher z') may be inaccurate. The literature has been unclear as to which of several alternative methods should be used instead, and how extreme a violation of normality is needed to justify an alternative. Through Monte Carlo simulation, 11 confidence interval methods were compared, including Fisher z', two Spearman rank-order methods, the Box-Cox transformation, rank-based inverse normal (RIN) transformation, and various bootstrap methods. Nonnormality often distorted the Fisher z' confidence interval-for example, leading to a 95 % confidence interval that had actual coverage as low as 68 %. Increasing the sample size sometimes worsened this problem. Inaccurate Fisher z' intervals could be predicted by a sample kurtosis of at least 2, an absolute sample skewness of at least 1, or significant violations of normality hypothesis tests. Only the Spearman rank-order and RIN transformation methods were universally robust to nonnormality. Among the bootstrap methods, an observed imposed bootstrap came closest to accurate coverage, though it often resulted in an overly long interval. The results suggest that sample nonnormality can justify avoidance of the Fisher z' interval in favor of a more robust alternative. R code for the relevant methods is provided in supplementary materials.

Binomial Distribution Sample Confidence Intervals Estimation 1. Sampling and Medical Key Parameters Calculation

Directory of Open Access Journals (Sweden)

Tudor DRUGAN

2003-08-01

Full Text Available The aim of the paper was to present the usefulness of the binomial distribution in studying of the contingency tables and the problems of approximation to normality of binomial distribution (the limits, advantages, and disadvantages. The classification of the medical keys parameters reported in medical literature and expressing them using the contingency table units based on their mathematical expressions restrict the discussion of the confidence intervals from 34 parameters to 9 mathematical expressions. The problem of obtaining different information starting with the computed confidence interval for a specified method, information like confidence intervals boundaries, percentages of the experimental errors, the standard deviation of the experimental errors and the deviation relative to significance level was solves through implementation in PHP programming language of original algorithms. The cases of expression, which contain two binomial variables, were separately treated. An original method of computing the confidence interval for the case of two-variable expression was proposed and implemented. The graphical representation of the expression of two binomial variables for which the variation domain of one of the variable depend on the other variable was a real problem because the most of the software used interpolation in graphical representation and the surface maps were quadratic instead of triangular. Based on an original algorithm, a module was implements in PHP in order to represent graphically the triangular surface plots. All the implementation described above was uses in computing the confidence intervals and estimating their performance for binomial distributions sample sizes and variable.

Constraint-based Attribute and Interval Planning

Science.gov (United States)

Jonsson, Ari; Frank, Jeremy

2013-01-01

In this paper we describe Constraint-based Attribute and Interval Planning (CAIP), a paradigm for representing and reasoning about plans. The paradigm enables the description of planning domains with time, resources, concurrent activities, mutual exclusions among sets of activities, disjunctive preconditions and conditional effects. We provide a theoretical foundation for the paradigm, based on temporal intervals and attributes. We then show how the plans are naturally expressed by networks of constraints, and show that the process of planning maps directly to dynamic constraint reasoning. In addition, we de ne compatibilities, a compact mechanism for describing planning domains. We describe how this framework can incorporate the use of constraint reasoning technology to improve planning. Finally, we describe EUROPA, an implementation of the CAIP framework.

Optimal test intervals for shutdown systems for the Cernavoda nuclear power station

International Nuclear Information System (INIS)

Negut, Gh.; Laslau, F.

1993-01-01

Cernavoda nuclear power station required a complete PSA study. As a part of this study, an important goal to enhance the effectiveness of the plant operation is to establish optimal test intervals for the important engineering safety systems. The paper presents, briefly, the current methods to optimize the test intervals. For this reason it was used Vesely methods to establish optimal test intervals and Frantic code to survey the influence of the test intervals on system availability. The applications were done on the Shutdown System no. 1, a shutdown system provided whit solid rods and on Shutdown System no. 2 provided with injecting poison. The shutdown systems receive nine total independent scram signals that dictate the test interval. Fault trees for the both safety systems were developed. For the fault tree solutions an original code developed in our Institute was used. The results, intended to be implemented in the technical specifications for test and operation of Cernavoda NPS are presented

Circadian profile of QT interval and QT interval variability in 172 healthy volunteers

DEFF Research Database (Denmark)

Bonnemeier, Hendrik; Wiegand, Uwe K H; Braasch, Wiebke

2003-01-01

of sleep. QT and R-R intervals revealed a characteristic day-night-pattern. Diurnal profiles of QT interval variability exhibited a significant increase in the morning hours (6-9 AM; P ... lower at day- and nighttime. Aging was associated with an increase of QT interval mainly at daytime and a significant shift of the T wave apex towards the end of the T wave. The circadian profile of ventricular repolarization is strongly related to the mean R-R interval, however, there are significant...

Ion track membranes providing heat pipe surfaces with capillary structures

International Nuclear Information System (INIS)

Akapiev, G.N.; Dmitriev, S.N.; Erler, B.; Shirkova, V.V.; Schulz, A.; Pietsch, H.

2003-01-01

The microgalvanic method for metal filling of etched ion tracks in organic foils is of particular interest for the fabrication of microsized structures. Microstructures like copper whiskers with a high aspect ratio produced in ion track membranes are suitable for the generation of high-performance heat transfer surfaces. A surface with good heat transfer characteristics is defined as a surface on which a small temperature difference causes a large heat transfer from the surface material to the liquid. It is well-known that a porous surface layer transfers to an evaporating liquid a given quantity of heat at a smaller temperature difference than does a usual smooth surface. Copper whiskers with high aspect ratio and a density 10 5 per cm 2 form such a porous structure, which produces strong capillary forces and therefore a maximum of heat transfer coefficients

Analysis and synthesis for interval type-2 fuzzy-model-based systems

CERN Document Server

Li, Hongyi; Lam, Hak-Keung; Gao, Yabin

2016-01-01

This book develops a set of reference methods capable of modeling uncertainties existing in membership functions, and analyzing and synthesizing the interval type-2 fuzzy systems with desired performances. It also provides numerous simulation results for various examples, which fill certain gaps in this area of research and may serve as benchmark solutions for the readers. Interval type-2 T-S fuzzy models provide a convenient and flexible method for analysis and synthesis of complex nonlinear systems with uncertainties.

Interpregnancy intervals: impact of postpartum contraceptive effectiveness and coverage.

Science.gov (United States)

Thiel de Bocanegra, Heike; Chang, Richard; Howell, Mike; Darney, Philip

2014-04-01

The purpose of this study was to determine the use of contraceptive methods, which was defined by effectiveness, length of coverage, and their association with short interpregnancy intervals, when controlling for provider type and client demographics. We identified a cohort of 117,644 women from the 2008 California Birth Statistical Master file with second or higher order birth and at least 1 Medicaid (Family Planning, Access, Care, and Treatment [Family PACT] program or Medi-Cal) claim within 18 months after index birth. We explored the effect of contraceptive method provision on the odds of having an optimal interpregnancy interval and controlled for covariates. The average length of contraceptive coverage was 3.81 months (SD = 4.84). Most women received user-dependent hormonal contraceptives as their most effective contraceptive method (55%; n = 65,103 women) and one-third (33%; n = 39,090 women) had no contraceptive claim. Women who used long-acting reversible contraceptive methods had 3.89 times the odds and women who used user-dependent hormonal methods had 1.89 times the odds of achieving an optimal birth interval compared with women who used barrier methods only; women with no method had 0.66 times the odds. When user-dependent methods are considered, the odds of having an optimal birth interval increased for each additional month of contraceptive coverage by 8% (odds ratio, 1.08; 95% confidence interval, 1.08-1.09). Women who were seen by Family PACT or by both Family PACT and Medi-Cal providers had significantly higher odds of optimal birth intervals compared with women who were served by Medi-Cal only. To achieve optimal birth spacing and ultimately to improve birth outcomes, attention should be given to contraceptive counseling and access to contraceptive methods in the postpartum period. Copyright © 2014 Mosby, Inc. All rights reserved.

Monitoring molecular interactions using photon arrival-time interval distribution analysis

Science.gov (United States)

Laurence, Ted A [Livermore, CA; Weiss, Shimon [Los Angels, CA

2009-10-06

A method for analyzing/monitoring the properties of species that are labeled with fluorophores. A detector is used to detect photons emitted from species that are labeled with one or more fluorophores and located in a confocal detection volume. The arrival time of each of the photons is determined. The interval of time between various photon pairs is then determined to provide photon pair intervals. The number of photons that have arrival times within the photon pair intervals is also determined. The photon pair intervals are then used in combination with the corresponding counts of intervening photons to analyze properties and interactions of the molecules including brightness, concentration, coincidence and transit time. The method can be used for analyzing single photon streams and multiple photon streams.

QT Interval Prolongation as a Biomarker for Torsades de Pointes and Sudden Death in Drug Development

Directory of Open Access Journals (Sweden)

Gregory D. Sides

2002-01-01

Full Text Available Prolongation of the QT interval on the surface 12-lead electrocardiogram is widely accepted as a biomarker for the potential of a drug to produce torsades de pointes and/or sudden death. Detection of drug-induced prolongation of the QT interval in animals and man is frequently confounded by extrinsic and intrinsic factors that limit the ability to detect a true drug effect. In particular drugs that increase heart rate show an apparent increase in QT interval that confounds assessment of a true drug effect on cardiac ventricular repolarization. The basis for the use of the QT interval as a biomarker will be examined.

Effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame (Sesamum indicum

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame, an experiment was conducted at experimental station, college of agriculture, Ferdowsi University of Mashhad. Four different irrigation intervals (one, two, three and four weeks with four plant densities (20, 30, 40 and 50 plants/m2 were compared in a spilt plot arrangement based on randomized complete block design with four replications. Irrigation intervals and plant densities allocated in main plots and subplots, respectively. Different characteristics such as plant height, distance of first capsule from soil surface, number of branches per plant, number of grains per capsule, number of capsules per plant, grain yield, 1000-seed weight, harvest index and oil yield were recorded. The results showed that there were no significant difference between different irrigation intervals in terms of distance of first capsule from soil surface, number of grains per capsule, 1000-seed weight and harvest index. Different irrigation intervals had significant effects on plant height, number of branches per plant, number of capsules per plant, grain yield and oil yield. There were significant differences between different plant densities in terms of distance of first capsule from soil surface, number of branches per plant, number of graines per capsule, number of capsules per plant, grain yield, harvest index and oil yield. The highest grain yield (798/7 kg/ha and oil yield (412/8 kg/ha were obtained at one week and four weeks irrigation intervals, respectively. Between all treatments, 50 plants/m2 and one week irrigation interval produced the highest grain yield (914/7 kg/ha and oil yield (478/6 kg/ha. Because of shortage of water in Mashhad condition, the results recommended that, 50 plants/m2 and two weeks irrigation interval produced rather acceptable grain yield, with less water consumption.

Interval Size and Phrase Position: A Comparison between German and Chinese Folksongs

Directory of Open Access Journals (Sweden)

Daniel Shanahan

2012-09-01

Full Text Available It is well known that the pitch of the voice tends to decline over the course of a spoken utterance. Ladd (2008 showed that there is also a tendency for the pitch range of spoken utterances to shrink as the pitch of the voice declines. Motivated by this work, two studies are reported that test for the existence of “late phrase compression” in music where the interval size tends to decline toward the end of a phrase. A study of 39,863 phrases from notated Germanic folksongs shows the predicted decline in interval size. However, a second study of 10,985 phrases from Chinese folksongs shows a reverse relationship. In fact, the interval behaviors in Chinese and Germanic folksongs provide marked contrasts: Chinese phrases are dominated by relatively large intervals, but begin with small intervals and end with medium-small intervals. Germanic phrases are dominated by relatively medium intervals, but begin with large intervals and end with small intervals. In short, late phrase interval compression is not evident cross-culturally.

Risk prediction of cardiovascular death based on the QTc interval

DEFF Research Database (Denmark)

Nielsen, Jonas B; Graff, Claus; Rasmussen, Peter V

2014-01-01

electrocardiograms from 173 529 primary care patients aged 50-90 years were collected during 2001-11. The Framingham formula was used for heart rate-correction of the QT interval. Data on medication, comorbidity, and outcomes were retrieved from administrative registries. During a median follow-up period of 6......AIMS: Using a large, contemporary primary care population we aimed to provide absolute long-term risks of cardiovascular death (CVD) based on the QTc interval and to test whether the QTc interval is of value in risk prediction of CVD on an individual level. METHODS AND RESULTS: Digital...

Prolonged Tp-e Interval in Down Syndrome Patients with Congenitally Normal Hearts.

Science.gov (United States)

Kucuk, Mehmet; Karadeniz, Cem; Ozdemir, Rahmi; Meşe, Timur

2018-03-25

Heterogeneity of ventricular repolarization has been assessed by using the QT dispersion in Down syndrome (DS) patients with congenitally normal hearts. However, novel repolarization indexes, the Tp-e interval and Tp-e/QT ratio, have not previously been evaluated in these patients. The aim of this study was to evaluate the Tp-e interval and Tp-e/QT ratio in DS patients without congenital heart defects. Twelve-lead surface electrocardiograms of 160 DS patients and 110 age- and sex-matched healthy controls were used to evaluate and compare the Tp-e interval, Tp-e dispersion, and Tp-e/QT ratio. Heart rate, Tp-e interval, Tp-e dispersion, Tp-e/QT and Tp-e/QTc ratios were significantly higher in DS group than in the controls. Myocardial repolarization indexes in DS patients with congenitally normal hearts were found to be prolonged compared to those in normal controls. Further evaluation is warranted to reveal a relationship between prolonged repolarization indexes and arrhythmic events in these patients. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

New Inner Product Quasilinear Spaces on Interval Numbers

Directory of Open Access Journals (Sweden)

Hacer Bozkurt

2016-01-01

Full Text Available Primarily we examine the new example of quasilinear spaces, namely, “IRn interval space.” We obtain some new theorems and results related to this new quasilinear space. After giving some new notions of quasilinear dependence-independence and basis on quasilinear functional analysis, we obtain some results on IRn interval space related to these concepts. Secondly, we present Is,Ic0,Il∞, and Il2 quasilinear spaces and we research some algebraic properties of these spaces. We obtain some new results and provide an important contribution to the improvement of quasilinear functional analysis.

Electrocardiogram: his bundle potentials can be recorded noninvasively beat by beat on surface electrocardiogram.

Science.gov (United States)

Wang, Gaopin; Liu, Renguang; Chang, Qinghua; Xu, Zhaolong; Zhang, Yingjie; Pan, Dianzhu

2017-03-15

The micro waveform of His bundle potential can't be recorded beat-to-beat on surface electrocardiogram yet. We have found that the micro-wavelets before QRS complex may be related to atrioventricular conduction system potentials. This study is to explore the possibility of His bundle potential can be noninvasively recorded on surface electrocardiogram. We randomized 65 patients undergoing radiofrequency catheter ablation of paroxysmal superventricular tachycardia (exclude overt Wolff-Parkinson-White syndrome) to receive "conventional electrocardiogram" and "new electrocardiogram" before the procedure. His bundle electrogram was collected during the procedure. Comparative analysis of PA s (PA interval recorded on surface electrocardiogram), AH s (AH interval recorded on surface electrocardiogram) and HV s (HV interval recorded on surface electrocardiogram) interval recorded on surface "new electrocardiogram" and PA, AH, HV interval recorded on His bundle electrogram was investigated. There was no difference (P > 0.05) between groups in HV s interval (49.63 ± 6.19 ms) and HV interval (49.35 ± 6.49 ms). Results of correlational analysis found that HV S interval was significantly positively associated with HV interval (r = 0.929; P electrocardiogram. Noninvasive His bundle potential tracing might represent a new method for locating the site of atrioventricular block and identifying the origin of a wide QRS complex.

A New Uncertain Analysis Method for the Prediction of Acoustic Field with Random and Interval Parameters

Directory of Open Access Journals (Sweden)

Mingjie Wang

2016-01-01

Full Text Available For the frequency response analysis of acoustic field with random and interval parameters, a nonintrusive uncertain analysis method named Polynomial Chaos Response Surface (PCRS method is proposed. In the proposed method, the polynomial chaos expansion method is employed to deal with the random parameters, and the response surface method is used to handle the interval parameters. The PCRS method does not require efforts to modify model equations due to its nonintrusive characteristic. By means of the PCRS combined with the existing interval analysis method, the lower and upper bounds of expectation, variance, and probability density function of the frequency response can be efficiently evaluated. Two numerical examples are conducted to validate the accuracy and efficiency of the approach. The results show that the PCRS method is more efficient compared to the direct Monte Carlo simulation (MCS method based on the original numerical model without causing significant loss of accuracy.

Rotational electrical impedance tomography using electrodes with limited surface coverage provides window for multimodal sensing

Science.gov (United States)

Lehti-Polojärvi, Mari; Koskela, Olli; Seppänen, Aku; Figueiras, Edite; Hyttinen, Jari

2018-02-01

Electrical impedance tomography (EIT) is an imaging method that could become a valuable tool in multimodal applications. One challenge in simultaneous multimodal imaging is that typically the EIT electrodes cover a large portion of the object surface. This paper investigates the feasibility of rotational EIT (rEIT) in applications where electrodes cover only a limited angle of the surface of the object. In the studied rEIT, the object is rotated a full 360° during a set of measurements to increase the information content of the data. We call this approach limited angle full revolution rEIT (LAFR-rEIT). We test LAFR-rEIT setups in two-dimensional geometries with computational and experimental data. We use up to 256 rotational measurement positions, which requires a new way to solve the forward and inverse problem of rEIT. For this, we provide a modification, available for EIDORS, in the supplementary material. The computational results demonstrate that LAFR-rEIT with eight electrodes produce the same image quality as conventional 16-electrode rEIT, when data from an adequate number of rotational measurement positions are used. Both computational and experimental results indicate that the novel LAFR-rEIT provides good EIT with setups with limited surface coverage and a small number of electrodes.

Interval algebra - an effective means of scheduling surveillance radar networks

CSIR Research Space (South Africa)

Focke, RW

2015-05-01

Full Text Available Interval Algebra provides an effective means to schedule surveillance radar networks, as it is a temporal ordering constraint language. Thus it provides a solution to a part of resource management, which is included in the revised Data Fusion...

Interval algebra: an effective means of scheduling surveillance radar networks

CSIR Research Space (South Africa)

Focke, RW

2015-05-01

Full Text Available Interval Algebra provides an effective means to schedule surveillance radar networks, as it is a temporal ordering constraint language. Thus it provides a solution to a part of resource management, which is included in the revised Data Fusion...

Comparison of force fields and calculation methods for vibration intervals of isotopic H+3 molecules

International Nuclear Information System (INIS)

Carney, G.D.; Adler-Golden, S.M.; Lesseski, D.C.

1986-01-01

This paper reports (a) improved values for low-lying vibration intervals of H + 3 , H 2 D + , D 2 H + , and D + 3 calculated using the variational method and Simons--Parr--Finlan representations of the Carney--Porter and Dykstra--Swope ab initio H + 3 potential energy surfaces, (b) quartic normal coordinate force fields for isotopic H + 3 molecules, (c) comparisons of variational and second-order perturbation theory, and (d) convergence properties of the Lai--Hagstrom internal coordinate vibrational Hamiltonian. Standard deviations between experimental and ab initio fundamental vibration intervals of H + 3 , H 2 D + , D 2 H + , and D + 3 for these potential surfaces are 6.9 (Carney--Porter) and 1.2 cm -1 (Dykstra--Swope). The standard deviations between perturbation theory and exact variational fundamentals are 5 and 10 cm -1 for the respective surfaces. The internal coordinate Hamiltonian is found to be less efficient than the previously employed ''t'' coordinate Hamiltonian for these molecules, except in the case of H 2 D +

Statistical intervals a guide for practitioners

CERN Document Server

Hahn, Gerald J

2011-01-01

Presents a detailed exposition of statistical intervals and emphasizes applications in industry. The discussion differentiates at an elementary level among different kinds of statistical intervals and gives instruction with numerous examples and simple math on how to construct such intervals from sample data. This includes confidence intervals to contain a population percentile, confidence intervals on probability of meeting specified threshold value, and prediction intervals to include observation in a future sample. Also has an appendix containing computer subroutines for nonparametric stati

Statistics of return intervals between long heartbeat intervals and their usability for online prediction of disorders

International Nuclear Information System (INIS)

Bogachev, Mikhail I; Bunde, Armin; Kireenkov, Igor S; Nifontov, Eugene M

2009-01-01

We study the statistics of return intervals between large heartbeat intervals (above a certain threshold Q) in 24 h records obtained from healthy subjects. We find that both the linear and the nonlinear long-term memory inherent in the heartbeat intervals lead to power-laws in the probability density function P Q (r) of the return intervals. As a consequence, the probability W Q (t; Δt) that at least one large heartbeat interval will occur within the next Δt heartbeat intervals, with an increasing elapsed number of intervals t after the last large heartbeat interval, follows a power-law. Based on these results, we suggest a method of obtaining a priori information about the occurrence of the next large heartbeat interval, and thus to predict it. We show explicitly that the proposed method, which exploits long-term memory, is superior to the conventional precursory pattern recognition technique, which focuses solely on short-term memory. We believe that our results can be straightforwardly extended to obtain more reliable predictions in other physiological signals like blood pressure, as well as in other complex records exhibiting multifractal behaviour, e.g. turbulent flow, precipitation, river flows and network traffic.

Confidence intervals for distinguishing ordinal and disordinal interactions in multiple regression.

Science.gov (United States)

Lee, Sunbok; Lei, Man-Kit; Brody, Gene H

2015-06-01

Distinguishing between ordinal and disordinal interaction in multiple regression is useful in testing many interesting theoretical hypotheses. Because the distinction is made based on the location of a crossover point of 2 simple regression lines, confidence intervals of the crossover point can be used to distinguish ordinal and disordinal interactions. This study examined 2 factors that need to be considered in constructing confidence intervals of the crossover point: (a) the assumption about the sampling distribution of the crossover point, and (b) the possibility of abnormally wide confidence intervals for the crossover point. A Monte Carlo simulation study was conducted to compare 6 different methods for constructing confidence intervals of the crossover point in terms of the coverage rate, the proportion of true values that fall to the left or right of the confidence intervals, and the average width of the confidence intervals. The methods include the reparameterization, delta, Fieller, basic bootstrap, percentile bootstrap, and bias-corrected accelerated bootstrap methods. The results of our Monte Carlo simulation study suggest that statistical inference using confidence intervals to distinguish ordinal and disordinal interaction requires sample sizes more than 500 to be able to provide sufficiently narrow confidence intervals to identify the location of the crossover point. (c) 2015 APA, all rights reserved).

Probability Distribution for Flowing Interval Spacing

International Nuclear Information System (INIS)

Kuzio, S.

2001-01-01

The purpose of this analysis is to develop a probability distribution for flowing interval spacing. A flowing interval is defined as a fractured zone that transmits flow in the Saturated Zone (SZ), as identified through borehole flow meter surveys (Figure 1). This analysis uses the term ''flowing interval spacing'' as opposed to fractured spacing, which is typically used in the literature. The term fracture spacing was not used in this analysis because the data used identify a zone (or a flowing interval) that contains fluid-conducting fractures but does not distinguish how many or which fractures comprise the flowing interval. The flowing interval spacing is measured between the midpoints of each flowing interval. Fracture spacing within the SZ is defined as the spacing between fractures, with no regard to which fractures are carrying flow. The Development Plan associated with this analysis is entitled, ''Probability Distribution for Flowing Interval Spacing'', (CRWMS M and O 2000a). The parameter from this analysis may be used in the TSPA SR/LA Saturated Zone Flow and Transport Work Direction and Planning Documents: (1) ''Abstraction of Matrix Diffusion for SZ Flow and Transport Analyses'' (CRWMS M and O 1999a) and (2) ''Incorporation of Heterogeneity in SZ Flow and Transport Analyses'', (CRWMS M and O 1999b). A limitation of this analysis is that the probability distribution of flowing interval spacing may underestimate the effect of incorporating matrix diffusion processes in the SZ transport model because of the possible overestimation of the flowing interval spacing. Larger flowing interval spacing results in a decrease in the matrix diffusion processes. This analysis may overestimate the flowing interval spacing because the number of fractures that contribute to a flowing interval cannot be determined from the data. Because each flowing interval probably has more than one fracture contributing to a flowing interval, the true flowing interval spacing could be

Two-sorted Point-Interval Temporal Logics

DEFF Research Database (Denmark)

Balbiani, Philippe; Goranko, Valentin; Sciavicco, Guido

2011-01-01

There are two natural and well-studied approaches to temporal ontology and reasoning: point-based and interval-based. Usually, interval-based temporal reasoning deals with points as particular, duration-less intervals. Here we develop explicitly two-sorted point-interval temporal logical framework...... whereby time instants (points) and time periods (intervals) are considered on a par, and the perspective can shift between them within the formal discourse. We focus on fragments involving only modal operators that correspond to the inter-sort relations between points and intervals. We analyze...

Interval Management: Development and Implementation of an Airborne Spacing Concept

Science.gov (United States)

Barmore, Bryan E.; Penhallegon, William J.; Weitz, Lesley A.; Bone, Randall S.; Levitt, Ian; Flores Kriegsfeld, Julia A.; Arbuckle, Doug; Johnson, William C.

2016-01-01

Interval Management is a suite of ADS-B-enabled applications that allows the air traffic controller to instruct a flight crew to achieve and maintain a desired spacing relative to another aircraft. The flight crew, assisted by automation, manages the speed of their aircraft to deliver more precise inter-aircraft spacing than is otherwise possible, which increases traffic throughput at the same or higher levels of safety. Interval Management has evolved from a long history of research and is now seen as a core NextGen capability. With avionics standards recently published, completion of an Investment Analysis Readiness Decision by the FAA, and multiple flight tests planned, Interval Management will soon be part of everyday use in the National Airspace System. Second generation, Advanced Interval Management capabilities are being planned to provide a wider range of operations and improved performance and benefits. This paper briefly reviews the evolution of Interval Management and describes current development and deployment plans. It also reviews concepts under development as the next generation of applications.

High-intensity interval training: Modulating interval duration in overweight/obese men.

Science.gov (United States)

Smith-Ryan, Abbie E; Melvin, Malia N; Wingfield, Hailee L

2015-05-01

High-intensity interval training (HIIT) is a time-efficient strategy shown to induce various cardiovascular and metabolic adaptations. Little is known about the optimal tolerable combination of intensity and volume necessary for adaptations, especially in clinical populations. In a randomized controlled pilot design, we evaluated the effects of two types of interval training protocols, varying in intensity and interval duration, on clinical outcomes in overweight/obese men. Twenty-five men [body mass index (BMI) > 25 kg · m(2)] completed baseline body composition measures: fat mass (FM), lean mass (LM) and percent body fat (%BF) and fasting blood glucose, lipids and insulin (IN). A graded exercise cycling test was completed for peak oxygen consumption (VO2peak) and power output (PO). Participants were randomly assigned to high-intensity short interval (1MIN-HIIT), high-intensity interval (2MIN-HIIT) or control groups. 1MIN-HIIT and 2MIN-HIIT completed 3 weeks of cycling interval training, 3 days/week, consisting of either 10 × 1 min bouts at 90% PO with 1 min rests (1MIN-HIIT) or 5 × 2 min bouts with 1 min rests at undulating intensities (80%-100%) (2MIN-HIIT). There were no significant training effects on FM (Δ1.06 ± 1.25 kg) or %BF (Δ1.13% ± 1.88%), compared to CON. Increases in LM were not significant but increased by 1.7 kg and 2.1 kg for 1MIN and 2MIN-HIIT groups, respectively. Increases in VO2peak were also not significant for 1MIN (3.4 ml·kg(-1) · min(-1)) or 2MIN groups (2.7 ml · kg(-1) · min(-1)). IN sensitivity (HOMA-IR) improved for both training groups (Δ-2.78 ± 3.48 units; p < 0.05) compared to CON. HIIT may be an effective short-term strategy to improve cardiorespiratory fitness and IN sensitivity in overweight males.

Two intervals Rényi entanglement entropy of compact free boson on torus

International Nuclear Information System (INIS)

Liu, Feihu; Liu, Xiao

2016-01-01

We compute the N=2 Rényi entanglement entropy of two intervals at equal time in a circle, for the theory of a 2D compact complex free scalar at finite temperature. This is carried out by performing functional integral on a genus 3 ramified cover of the torus, wherein the quantum part of the integral is captured by the four point function of twist fields on the worldsheet torus, and the classical piece is given by summing over winding modes of the genus 3 surface onto the target space torus. The final result is given in terms of a product of theta functions and certain multi-dimensional theta functions. We demonstrate the T-duality invariance of the result. We also study its low temperature limit. In the case in which the size of the intervals and of their separation are much smaller than the whole system, our result is in exact agreement with the known result for two intervals on an infinite system at zero temperature http://dx.doi.org/10.1088/1742-5468/2009/11/P11001. In the case in which the separation between the two intervals is much smaller than the interval length, the leading thermal corrections take the same universal form as proposed in http://dx.doi.org/10.1103/PhysRevLett.112.171603, http://dx.doi.org/10.1103/PhysRevD.91.105013 for Rényi entanglement entropy of a single interval.

Confidence Intervals for Weighted Composite Scores under the Compound Binomial Error Model

Science.gov (United States)

Kim, Kyung Yong; Lee, Won-Chan

2018-01-01

Reporting confidence intervals with test scores helps test users make important decisions about examinees by providing information about the precision of test scores. Although a variety of estimation procedures based on the binomial error model are available for computing intervals for test scores, these procedures assume that items are randomly…

Some Characterizations of Convex Interval Games

NARCIS (Netherlands)

Brânzei, R.; Tijs, S.H.; Alparslan-Gok, S.Z.

2008-01-01

This paper focuses on new characterizations of convex interval games using the notions of exactness and superadditivity. We also relate big boss interval games with concave interval games and obtain characterizations of big boss interval games in terms of exactness and subadditivity.

Fabrication of multi-functional silicon surface by direct laser writing

Science.gov (United States)

Verma, Ashwani Kumar; Soni, R. K.

2018-05-01

We present a simple, quick and one-step methodology based on nano-second laser direct writing for the fabrication of micro-nanostructures on silicon surface. The fabricated surfaces suppress the optical reflection by multiple reflection due to light trapping effect to a much lower value than polished silicon surface. These textured surfaces offer high enhancement ability after gold nanoparticle deposition and then explored for Surface Enhanced Raman Scattering (SERS) for specific molecular detection. The effect of laser scanning line interval on optical reflection and SERS signal enhancement ability was also investigated. Our results indicate that low optical reflection substrates exhibit uniform SERS enhancement with enhancement factor of the order of 106. Furthermore, this methodology provide an alternative approach for cost-effective large area fabrication with good control over feature size.

Multivariate interval-censored survival data

DEFF Research Database (Denmark)

Hougaard, Philip

2014-01-01

Interval censoring means that an event time is only known to lie in an interval (L,R], with L the last examination time before the event, and R the first after. In the univariate case, parametric models are easily fitted, whereas for non-parametric models, the mass is placed on some intervals, de...

Motor Unit Interpulse Intervals During High Force Contractions.

Science.gov (United States)

Stock, Matt S; Thompson, Brennan J

2016-01-01

We examined the means, medians, and variability for motor-unit interpulse intervals (IPIs) during voluntary, high force contractions. Eight men (mean age = 22 years) attempted to perform isometric contractions at 90% of their maximal voluntary contraction force while bipolar surface electromyographic (EMG) signals were detected from the vastus lateralis and vastus medialis muscles. Surface EMG signal decomposition was used to determine the recruitment thresholds and IPIs of motor units that demonstrated accuracy levels ≥ 96.0%. Motor units with high recruitment thresholds demonstrated longer mean IPIs, but the coefficients of variation were similar across all recruitment thresholds. Polynomial regression analyses indicated that for both muscles, the relationship between the means and standard deviations of the IPIs was linear. The majority of IPI histograms were positively skewed. Although low-threshold motor units were associated with shorter IPIs, the variability among motor units with differing recruitment thresholds was comparable.

Reference Intervals of Common Clinical Chemistry Analytes for Adults in Hong Kong.

Science.gov (United States)

Lo, Y C; Armbruster, David A

2012-04-01

Defining reference intervals is a major challenge because of the difficulty in recruiting volunteers to participate and testing samples from a significant number of healthy reference individuals. Historical literature citation intervals are often suboptimal because they're be based on obsolete methods and/or only a small number of poorly defined reference samples. Blood donors in Hong Kong gave permission for additional blood to be collected for reference interval testing. The samples were tested for twenty-five routine analytes on the Abbott ARCHITECT clinical chemistry system. Results were analyzed using the Rhoads EP evaluator software program, which is based on the CLSI/IFCC C28-A guideline, and defines the reference interval as the 95% central range. Method specific reference intervals were established for twenty-five common clinical chemistry analytes for a Chinese ethnic population. The intervals were defined for each gender separately and for genders combined. Gender specific or combined gender intervals were adapted as appropriate for each analyte. A large number of healthy, apparently normal blood donors from a local ethnic population were tested to provide current reference intervals for a new clinical chemistry system. Intervals were determined following an accepted international guideline. Laboratories using the same or similar methodologies may adapt these intervals if deemed validated and deemed suitable for their patient population. Laboratories using different methodologies may be able to successfully adapt the intervals for their facilities using the reference interval transference technique based on a method comparison study.

High-intensity interval training (HIIT for patients with chronic diseases

Directory of Open Access Journals (Sweden)

Leanna M. Ross

2016-06-01

Full Text Available Exercise training provides physiological benefits for both improving athletic performance and maintaining good health. Different exercise training modalities and strategies exist. Two common exercise strategies are high-intensity interval training (HIIT and moderate-intensity continuous exercise training (MCT. HIIT was first used early in the 20th century and popularized later that century for improving performance of Olympic athletes. The primary premise underlying HIIT is that, compared to energy expenditure-matched MCT, a greater amount of work is performed at a higher intensity during a single exercise session which is achieved by alternating high-intensity exercise intervals with low-intensity exercise or rest intervals. Emerging research suggests that this same training method can provide beneficial effects for patients with a chronic disease and should be included in the comprehensive medical management plan. Accordingly, a major consideration in developing an individual exercise prescription for a patient with a chronic disease is the selection of an appropriate exercise strategy. In order to maximize exercise training benefits, this strategy should be tailored to the individual's need. The focus of this paper is to provide a brief summary of the current literature regarding the use of HIIT to enhance the functional capacity of individuals with cardiovascular, pulmonary, and diabetes diseases.

Limited Rationality and Its Quantification Through the Interval Number Judgments With Permutations.

Science.gov (United States)

Liu, Fang; Pedrycz, Witold; Zhang, Wei-Guo

2017-12-01

The relative importance of alternatives expressed in terms of interval numbers in the fuzzy analytic hierarchy process aims to capture the uncertainty experienced by decision makers (DMs) when making a series of comparisons. Under the assumption of full rationality, the judgements of DMs in the typical analytic hierarchy process could be consistent. However, since the uncertainty in articulating the opinions of DMs is unavoidable, the interval number judgements are associated with the limited rationality. In this paper, we investigate the concept of limited rationality by introducing interval multiplicative reciprocal comparison matrices. By analyzing the consistency of interval multiplicative reciprocal comparison matrices, it is observed that the interval number judgements are inconsistent. By considering the permutations of alternatives, the concepts of approximation-consistency and acceptable approximation-consistency of interval multiplicative reciprocal comparison matrices are proposed. The exchange method is designed to generate all the permutations. A novel method of determining the interval weight vector is proposed under the consideration of randomness in comparing alternatives, and a vector of interval weights is determined. A new algorithm of solving decision making problems with interval multiplicative reciprocal preference relations is provided. Two numerical examples are carried out to illustrate the proposed approach and offer a comparison with the methods available in the literature.

Uptake of recommended common reference intervals for chemical pathology in Australia.

Science.gov (United States)

Jones, Graham Rd; Koetsier, Sabrina

2017-05-01

Background Reference intervals are a vital part of reporting numerical pathology results. It is known, however, that variation in reference intervals between laboratories is common, even when analytical methods support common reference intervals. In response to this, in Australia, the Australasian Association of Clinical Biochemists together with the Royal College of Pathologists of Australasia published in 2014 a set of recommended common reference intervals for 11 common serum analytes (sodium, potassium, chloride, bicarbonate, creatinine male, creatinine female, calcium, calcium adjusted for albumin, phosphate, magnesium, lactate dehydrogenase, alkaline phosphatase and total protein). Methods Uptake of recommended common reference intervals in Australian laboratories was assessed using data from four annual cycles of the RCPAQAP reference intervals external quality assurance programme. Results Over three years, from 2013 to 2016, the use of the recommended upper and lower reference limits has increased from 40% to 83%. Nearly half of the intervals in use by enrolled laboratories in 2016 have been changed in this time period, indicating an active response to the guidelines. Conclusions These data support the activities of the Australasian Association of Clinical Biochemists and Royal College of Pathologists of Australasia in demonstrating a change in laboratory behaviour to reduce unnecessary variation in reference intervals and thus provide a consistent message to doctor and patients irrespective of the laboratory used.

Surface temperature and surface heat flux determination of the inverse heat conduction problem for a slab

International Nuclear Information System (INIS)

Kuroyanagi, Toshiyuki

1983-07-01

Based on an idea that surface conditions should be a reflection of interior temperature and interior heat flux variation as inverse as interior conditions has been determined completely by the surface temperature and/on surface heat flux as boundary conditions, a method is presented for determining the surface temperature and the surface heat flux of a solid when the temperature and heat flux at an interior point are a prescribed function of time. The method is developed by the integration of Duhumels' integral which has unknown temperature or unknown heat flux in its integrand. Specific forms of surface condition determination are developed for a sample inverse problem: slab. Ducussing the effect of a degree of avairable informations at an interior point due to damped system and the effect of variation of surface conditions on those formulations, it is shown that those formulations are capable of representing the unknown surface conditions except for small time interval followed by discontinuous change of surface conditions. The small un-resolved time interval is demonstrated by a numerical example. An evaluation method of heat flux at an interior point, which is requested by those formulations, is discussed. (author)

Dissection of a Quantitative Trait Locus for PR Interval Duration Identifies Tnni3k as a Novel Modulator of Cardiac Conduction

NARCIS (Netherlands)

Lodder, Elisabeth M.; Scicluna, Brendon P.; Milano, Annalisa; Sun, Albert Y.; Tang, Hao; Remme, Carol Ann; Moerland, Perry D.; Tanck, Michael W. T.; Pitt, Geoffrey S.; Marchuk, Douglas A.; Bezzina, Connie R.

2012-01-01

Atrio-ventricular conduction disease is a common feature in Mendelian rhythm disorders associated with sudden cardiac death and is characterized by prolongation of the PR interval on the surface electrocardiogram (ECG). Prolongation of the PR interval is also a strong predictor of atrial

The Elusive Universal Post-Mortem Interval Formula

Energy Technology Data Exchange (ETDEWEB)

Vass, Arpad Alexander [ORNL

2011-01-01

The following manuscript details our initial attempt at developing universal post-mortem interval formulas describing human decomposition. These formulas are empirically derived from data collected over the last 20 years from the University of Tennessee's Anthropology Research Facility, in Knoxville, Tennessee, USA. Two formulas were developed (surface decomposition and burial decomposition) based on temperature, moisture, and the partial pressure of oxygen, as being three of the four primary drivers for human decomposition. It is hoped that worldwide application of these formulas to environments and situations not readily studied in Tennessee will result in interdisciplinary cooperation between scientists and law enforcement personnel that will allow for future refinements of these models leading to increased accuracy.

On the Recognition of Fuzzy Circular Interval Graphs

OpenAIRE

Oriolo, Gianpaolo; Pietropaoli, Ugo; Stauffer, Gautier

2011-01-01

Fuzzy circular interval graphs are a generalization of proper circular arc graphs and have been recently introduced by Chudnovsky and Seymour as a fundamental subclass of claw-free graphs. In this paper, we provide a polynomial-time algorithm for recognizing such graphs, and more importantly for building a suitable representation.

Synchronization of Switched Interval Networks and Applications to Chaotic Neural Networks

Directory of Open Access Journals (Sweden)

Jinde Cao

2013-01-01

Full Text Available This paper investigates synchronization problem of switched delay networks with interval parameters uncertainty, based on the theories of the switched systems and drive-response technique, a mathematical model of the switched interval drive-response error system is established. Without constructing Lyapunov-Krasovskii functions, introducing matrix measure method for the first time to switched time-varying delay networks, combining Halanay inequality technique, synchronization criteria are derived for switched interval networks under the arbitrary switching rule, which are easy to verify in practice. Moreover, as an application, the proposed scheme is then applied to chaotic neural networks. Finally, numerical simulations are provided to illustrate the effectiveness of the theoretical results.

A PCT-wide collaborative clinical audit selecting recall intervals for patients according to risk.

Science.gov (United States)

Cannell, P J

2011-03-26

This audit was carried out to assess the level to which recall intervals were individually and appropriately selected for patients attending dental practices across a primary care trust (PCT) area in Essex. A retrospective audit was carried out by reference to patient records to assess various criteria, including whether patients were categorised according to risk of oral disease, whether an appropriate recall had been selected and whether a discussion regarding a recall interval had been undertaken. An educational event highlighting the issue of recall intervals was held. Subsequent to this a prospective audit was undertaken to assess relevant criteria. Prospective audit data showed a marked increase in the use of patient risk assessments for caries, periodontal disease, oral cancer and non-carious tooth surface loss (NCTSL). Recall intervals were also more often selected based on a patient's risk status and discussed with the patient compared to that observed in the retrospective audit data. This audit was successful as a tool to bring about change in the behaviour of dentists regarding their determination of appropriate recall intervals for patients. Whether that change in behaviour is long-term or transient requires further investigation.

Multiresolution Wavelet Analysis of Heartbeat Intervals Discriminates Healthy Patients from Those with Cardiac Pathology

Science.gov (United States)

Thurner, Stefan; Feurstein, Markus C.; Teich, Malvin C.

1998-02-01

We applied multiresolution wavelet analysis to the sequence of times between human heartbeats ( R-R intervals) and have found a scale window, between 16 and 32 heartbeat intervals, over which the widths of the R-R wavelet coefficients fall into disjoint sets for normal and heart-failure patients. This has enabled us to correctly classify every patient in a standard data set as belonging either to the heart-failure or normal group with 100% accuracy, thereby providing a clinically significant measure of the presence of heart failure from the R-R intervals alone. Comparison is made with previous approaches, which have provided only statistically significant measures.

Utilization threshold of surface water and groundwater based on the system optimization of crop planting structure

Directory of Open Access Journals (Sweden)

Qiang FU,Jiahong LI,Tianxiao LI,Dong LIU,Song CUI

2016-09-01

Full Text Available Based on the diversity of the agricultural system, this research calculates the planting structures of rice, maize and soybean considering the optimal economic-social-ecological aspects. Then, based on the uncertainty and randomness of the water resources system, the interval two-stage stochastic programming method, which introduces the uncertainty of the interval number, is used to calculate the groundwater exploitation and the use efficiency of surface water. The method considers the minimum cost of water as the objective of the uncertainty model for surface water and groundwater joint scheduling optimization for different planting structures. Finally, by calculating harmonious entropy, the optimal exploitation utilization interval of surface water and groundwater is determined for optimal cultivation in the Sanjiang Plain. The optimal matching of the planting structure under the economic system is suitable when the mining ratio of the surface is in 44.13%—45.45% and the exploitation utilization of groundwater is in 54.82%—66.86%, the optimal planting structure under the social system is suitable when surface water mining ratio is in 47.84%—48.04% and the groundwater exploitation threshold is in 67.07%—72.00%. This article optimizes the economic-social-ecological-water system, which is important for the development of a water- and food-conserving society and providing a more accurate management environment.

Investigating the correlation between paediatric stride interval persistence and gross energy expenditure

Directory of Open Access Journals (Sweden)

Sejdić Ervin

2010-02-01

Full Text Available Abstract Background Stride interval persistence, a term used to describe the correlation structure of stride interval time series, is thought to provide insight into neuromotor control, though its exact clinical meaning has not yet been realized. Since human locomotion is shaped by energy efficient movements, it has been hypothesized that stride interval dynamics and energy expenditure may be inherently tied, both having demonstrated similar sensitivities to age, disease, and pace-constrained walking. Findings This study tested for correlations between stride interval persistence and measures of energy expenditure including mass-specific gross oxygen consumption per minute (, mass-specific gross oxygen cost per meter (VO2 and heart rate (HR. Metabolic and stride interval data were collected from 30 asymptomatic children who completed one 10-minute walking trial under each of the following conditions: (i overground walking, (ii hands-free treadmill walking, and (iii handrail-supported treadmill walking. Stride interval persistence was not significantly correlated with (p > 0.32, VO2 (p > 0.18 or HR (p > 0.56. Conclusions No simple linear dependence exists between stride interval persistence and measures of gross energy expenditure in asymptomatic children when walking overground and on a treadmill.

Summary of significant solar-initiated events during STIP interval XII

International Nuclear Information System (INIS)

Gergely, T.E.

1982-01-01

A summary of the significant solar-terrestrial events of STIP Interval XII (April 10-July 1, 1981) is presented. It is shown that the first half of the interval was extremely active, with several of the largest X-ray flares, particle events, and shocks of this solar cycle taking place during April and the first half of May. However, the second half of the interval was characterized by relatively quiet conditions. A detailed examination is presented of several large events which occurred on 10, 24, and 27 April and on 8 and 16 May. It is suggested that the comparison and statistical analysis of the numerous events for which excellent observations are available could provide information on what causes a type II burst to propagate in the interplanetary medium

Preventive maintenance and the interval availability distribution of an unreliable production system

International Nuclear Information System (INIS)

Dijkhuizen, G. van; Heijden, M. van der

1999-01-01

Traditionally, the optimal preventive maintenance interval for an unreliable production system has been determined by maximizing its limiting availability. Nowadays, it is widely recognized that this performance measure does not always provide relevant information for practical purposes. This is particularly true for order-driven manufacturing systems, in which due date performance has become a more important, and even a competitive factor. Under these circumstances, the so-called interval availability distribution is often seen as a more appropriate performance measure. Surprisingly enough, the relation between preventive maintenance and interval availability has received little attention in the existing literature. In this article, a series of mathematical models and optimization techniques is presented, with which the optimal preventive maintenance interval can be determined from an interval availability point of view, rather than from a limiting availability perspective. Computational results for a class of representative test problems indicate that significant improvements of up to 30% in the guaranteed interval availability can be obtained, by increasing preventive maintenance frequencies somewhere between 10 and 70%

Reviewing interval cancers: Time well spent?

International Nuclear Information System (INIS)

Gower-Thomas, Kate; Fielder, Hilary M.P.; Branston, Lucy; Greening, Sarah; Beer, Helen; Rogers, Cerilan

2002-01-01

OBJECTIVES: To categorize interval cancers, and thus identify false-negatives, following prevalent and incident screens in the Welsh breast screening programme. SETTING: Breast Test Wales (BTW) Llandudno, Cardiff and Swansea breast screening units. METHODS: Five hundred and sixty interval breast cancers identified following negative mammographic screening between 1989 and 1997 were reviewed by eight screening radiologists. The blind review was achieved by mixing the screening films of women who subsequently developed an interval cancer with screen negative films of women who did not develop cancer, in a ratio of 4:1. Another radiologist used patients' symptomatic films to record a reference against which the reviewers' reports of the screening films were compared. Interval cancers were categorized as 'true', 'occult', 'false-negative' or 'unclassified' interval cancers or interval cancers with minimal signs, based on the National Health Service breast screening programme (NHSBSP) guidelines. RESULTS: Of the classifiable interval films, 32% were false-negatives, 55% were true intervals and 12% occult. The proportion of false-negatives following incident screens was half that following prevalent screens (P = 0.004). Forty percent of the seed films were recalled by the panel. CONCLUSIONS: Low false-negative interval cancer rates following incident screens (18%) versus prevalent screens (36%) suggest that lower cancer detection rates at incident screens may have resulted from fewer cancers than expected being present, rather than from a failure to detect tumours. The panel method for categorizing interval cancers has significant flaws as the results vary markedly with different protocol and is no more accurate than other, quicker and more timely methods. Gower-Thomas, K. et al. (2002)

V–V delay interval optimization in CRT using echocardiography compared to QRS width in surface ECG

Directory of Open Access Journals (Sweden)

Amr Nawar

2012-09-01

Conclusion: Significant correlation appeared to exist during optimization of CRT between VV programming based on the shortest QRS interval at 12-lead ECG pacing and that based on highest LVOT VTI by echocardiography. A combined ECG and echocardiographic approach could be a more convenient solution in performing V–V optimization.

Prediction Interval: What to Expect When You're Expecting … A Replication.

Directory of Open Access Journals (Sweden)

Jeffrey R Spence

Full Text Available A challenge when interpreting replications is determining whether the results of a replication "successfully" replicate the original study. Looking for consistency between two studies is challenging because individual studies are susceptible to many sources of error that can cause study results to deviate from each other and the population effect in unpredictable directions and magnitudes. In the current paper, we derive methods to compute a prediction interval, a range of results that can be expected in a replication due to chance (i.e., sampling error, for means and commonly used indexes of effect size: correlations and d-values. The prediction interval is calculable based on objective study characteristics (i.e., effect size of the original study and sample sizes of the original study and planned replication even when sample sizes across studies are unequal. The prediction interval provides an a priori method for assessing if the difference between an original and replication result is consistent with what can be expected due to sample error alone. We provide open-source software tools that allow researchers, reviewers, replicators, and editors to easily calculate prediction intervals.

Relation between century-scale Holocene arid intervals in tropical and temperate zones

Science.gov (United States)

Lamb, H. F.; Gasse, F.; Benkaddour, A.; El Hamouti, N.; van der Kaars, S.; Perkins, W. T.; Pearce, N. J.; Roberts, C. N.

1995-01-01

CLIMATE records from lake sediments in tropical Africa, Central America and west Asia show several century-scale arid intervals during the Holocene1-10. These may have been caused by temporary weakening of the monsoonal circulation associated with reduced northward heat transport by the oceans7 or by feedback processes stimulated by changes in tropical land-surface conditions10. Here we use a lake-sediment record from the montane Mediterranean zone of Morocco to address the question of whether these events were also felt in temperate continental regions. We find evidence of arid intervals of similar duration, periodicity and possibly timing to those in the tropics. But our pollen data show that the forest vegetation was not substantially affected by these events, indicating that precipitation remained adequate during the summer growing season. Thus, the depletion of the groundwater aquifer that imprinted the dry events in the lake record must have resulted from reduced winter precipitation. We suggest that the occurrence of arid events during the summer in the tropics but during the winter at temperate latitudes can be rationalized if they are both associated with cooler sea surface temperatures in the North Atlantic.

Interval neutrosophic sets and their application in multicriteria decision making problems.

Science.gov (United States)

Zhang, Hong-yu; Wang, Jian-qiang; Chen, Xiao-hong

2014-01-01

As a generalization of fuzzy sets and intuitionistic fuzzy sets, neutrosophic sets have been developed to represent uncertain, imprecise, incomplete, and inconsistent information existing in the real world. And interval neutrosophic sets (INSs) have been proposed exactly to address issues with a set of numbers in the real unit interval, not just a specific number. However, there are fewer reliable operations for INSs, as well as the INS aggregation operators and decision making method. For this purpose, the operations for INSs are defined and a comparison approach is put forward based on the related research of interval valued intuitionistic fuzzy sets (IVIFSs) in this paper. On the basis of the operations and comparison approach, two interval neutrosophic number aggregation operators are developed. Then, a method for multicriteria decision making problems is explored applying the aggregation operators. In addition, an example is provided to illustrate the application of the proposed method.

Event- and interval-based measurement of stuttering: a review.

Science.gov (United States)

Valente, Ana Rita S; Jesus, Luis M T; Hall, Andreia; Leahy, Margaret

2015-01-01

Event- and interval-based measurements are two different ways of computing frequency of stuttering. Interval-based methodology emerged as an alternative measure to overcome problems associated with reproducibility in the event-based methodology. No review has been made to study the effect of methodological factors in interval-based absolute reliability data or to compute the agreement between the two methodologies in terms of inter-judge, intra-judge and accuracy (i.e., correspondence between raters' scores and an established criterion). To provide a review related to reproducibility of event-based and time-interval measurement, and to verify the effect of methodological factors (training, experience, interval duration, sample presentation order and judgment conditions) on agreement of time-interval measurement; in addition, to determine if it is possible to quantify the agreement between the two methodologies The first two authors searched for articles on ERIC, MEDLINE, PubMed, B-on, CENTRAL and Dissertation Abstracts during January-February 2013 and retrieved 495 articles. Forty-eight articles were selected for review. Content tables were constructed with the main findings. Articles related to event-based measurements revealed values of inter- and intra-judge greater than 0.70 and agreement percentages beyond 80%. The articles related to time-interval measures revealed that, in general, judges with more experience with stuttering presented significantly higher levels of intra- and inter-judge agreement. Inter- and intra-judge values were beyond the references for high reproducibility values for both methodologies. Accuracy (regarding the closeness of raters' judgements with an established criterion), intra- and inter-judge agreement were higher for trained groups when compared with non-trained groups. Sample presentation order and audio/video conditions did not result in differences in inter- or intra-judge results. A duration of 5 s for an interval appears to be

Process of motion by unit steps over a surface provided with elements regularly arranged

International Nuclear Information System (INIS)

Cooper, D.E.; Hendee, L.C. III; Hill, W.G. Jr.; Leshem, Adam; Marugg, M.L.

1977-01-01

This invention concerns a process for moving by unit steps an apparatus travelling over a surface provided with an array of orifices aligned and evenly spaced in several lines and several parallel rows regularly spaced, the lines and rows being parallel to axes x and y of Cartesian co-ordinates, each orifice having a separate address in the Cartesian co-ordinate system. The surface travelling apparatus has two previously connected arms aranged in directions transversal to each other thus forming an angle corresponding to the intersection of axes x and y. In the inspection and/or repair of nuclear or similar steam generator tubes, it is desirable that such an apparatus should be able to move in front of a surface comprising an array of orifices by the selective alternate introduction and retraction of two sets of anchoring claws of the two respective arms, in relation to the orifices of the array, it being possible to shift the arms in a movement of translation, transversally to each other, as a set of claws is withdrawn from the orifices. The invention concerns a process and aparatus as indicated above that reduces to a minimum the path length of the apparatus between the orifices it is effectively opposite and a given orifice [fr

Hybrid integrated circuit for charge-to-time interval conversion

Energy Technology Data Exchange (ETDEWEB)

Basiladze, S.G.; Dotsenko, Yu.Yu.; Man' yakov, P.K.; Fedorchenko, S.N. (Joint Inst. for Nuclear Research, Dubna (USSR))

The hybrid integrated circuit for charge-to time interval conversion with nanosecond input fast response is described. The circuit can be used in energy measuring channels, time-to-digital converters and in the modified variant in amplitude-to-digital converters. The converter described consists of a buffer amplifier, a linear transmission circuit, a direct current source and a unit of time interval separation. The buffer amplifier represents a current follower providing low input and high output resistances by the current feedback. It is concluded that the described converter excelled the QT100B circuit analogous to it in a number of parameters especially, in thermostability.

Embodiment and the origin of interval timing: kinematic and electromyographic data.

Science.gov (United States)

Addyman, Caspar; Rocha, Sinead; Fautrelle, Lilian; French, Robert M; Thomas, Elizabeth; Mareschal, Denis

2017-03-01

Recent evidence suggests that interval timing (the judgment of durations lasting from approximately 500 ms. to a few minutes) is closely coupled to the action control system. We used surface electromyography (EMG) and motion capture technology to explore the emergence of this coupling in 4-, 6-, and 8-month-olds. We engaged infants in an active and socially relevant arm-raising task with seven cycles and response period. In one condition, cycles were slow (every 4 s); in another, they were fast (every 2 s). In the slow condition, we found evidence of time-locked sub-threshold EMG activity even in the absence of any observed overt motor responses at all three ages. This study shows that EMGs can be a more sensitive measure of interval timing in early development than overt behavior.

Monitoring the dynamics of surface water fraction from MODIS time series in a Mediterranean environment

Science.gov (United States)

Li, Linlin; Vrieling, Anton; Skidmore, Andrew; Wang, Tiejun; Turak, Eren

2018-04-01

Detailed spatial information of changes in surface water extent is needed for water management and biodiversity conservation, particularly in drier parts of the globe where small, temporally-variant wetlands prevail. Although global surface water histories are now generated from 30 m Landsat data, for many locations they contain large temporal gaps particularly for longer periods (>10 years) due to revisit intervals and cloud cover. Daily Moderate Resolution Imaging Spectrometer (MODIS) imagery has potential to fill such gaps, but its relatively coarse spatial resolution may not detect small water bodies, which can be of great ecological importance. To address this problem, this study proposes and tests options for estimating the surface water fraction from MODIS 16-day 500 m Bidirectional Reflectance Distribution Function (BRDF) corrected surface reflectance image composites. The spatial extent of two Landsat tiles over Spain were selected as test areas. We obtained a 500 m reference dataset on surface water fraction by spatially aggregating 30 m binary water masks obtained from the Landsat-derived C-version of Function of Mask (CFmask), which themselves were evaluated against high-resolution Google Earth imagery. Twelve regression tree models were developed with two approaches, Random Forest and Cubist, using spectral metrics derived from MODIS data and topographic parameters generated from a 30 m spatial resolution digital elevation model. Results showed that accuracies were higher when we included annual summary statistics of the spectral metrics as predictor variables. Models trained on a single Landsat tile were ineffective in mapping surface water in the other tile, but global models trained with environmental conditions from both tiles can provide accurate results for both study areas. We achieved the highest accuracy with Cubist global model (R2 = 0.91, RMSE = 11.05%, MAE = 7.67%). Our method was not only effective for mapping permanent water fraction, but

Interval Mathematics Applied to Critical Point Transitions

Directory of Open Access Journals (Sweden)

Benito A. Stradi

2012-03-01

Full Text Available The determination of critical points of mixtures is important for both practical and theoretical reasons in the modeling of phase behavior, especially at high pressure. The equations that describe the behavior of complex mixtures near critical points are highly nonlinear and with multiplicity of solutions to the critical point equations. Interval arithmetic can be used to reliably locate all the critical points of a given mixture. The method also verifies the nonexistence of a critical point if a mixture of a given composition does not have one. This study uses an interval Newton/Generalized Bisection algorithm that provides a mathematical and computational guarantee that all mixture critical points are located. The technique is illustrated using several example problems. These problems involve cubic equation of state models; however, the technique is general purpose and can be applied in connection with other nonlinear problems.

Investigating fluvial pattern and delta-planform geometry based on varying intervals of flood and interflood

Science.gov (United States)

Rambo, J. E.; Kim, W.; Miller, K.

2017-12-01

Physical modeling of a delta's evolution can represent how changing the intervals of flood and interflood can alter a delta's fluvial pattern and geometry. Here we present a set of six experimental runs in which sediment and water were discharged at constant rates over each experiment. During the "flood" period, both sediment and water were discharged at rates of 0.25 cm3/s and 15 ml/s respectively, and during the "interflood" period, only water was discharged at 7.5 ml/s. The flood periods were only run for 30 minutes to keep the total volume of sediment constant. Run 0 did not have an interflood period and therefore ran with constant sediment and water discharge for the duration of the experiment.The other five runs had either 5, 10, or 15-min intervals of flood with 5, 10, or 15-min intervals of interflood. The experimental results show that Run 0 had the smallest topset area. This is due to a lack of surface reworking that takes place during interflood periods. Run 1 had 15-minute intervals of flood and 15-minute intervals of interflood, and it had the largest topset area. Additionally, the experiments that had longer intervals of interflood than flood had more elongated delta geometries. Wetted fraction color maps were also created to plot channel locations during each run. The maps show that the runs with longer interflood durations had channels occurring predominantly down the middle with stronger incisions; these runs produced deltas with more elongated geometries. When the interflood duration was even longer, however, strong channels started to occur at multiple locations. This increased interflood period allowed for the entire area over the delta's surface to be reworked, thus reducing the downstream slope and allowing channels to be more mobile laterally. Physical modeling of a delta allows us to predict a delta's resulting geometry given a set of conditions. This insight is needed especially with delta's being the home to many populations of people and

Systematic review of serum steroid reference intervals developed using mass spectrometry.

Science.gov (United States)

Tavita, Nevada; Greaves, Ronda F

2017-12-01

The aim of this study was to perform a systematic review of the published literature to determine the available serum/plasma steroid reference intervals generated by mass spectrometry (MS) methods across all age groups in healthy subjects and to suggest recommendations to achieve common MS based reference intervals for serum steroids. MEDLINE, EMBASE and PubMed databases were used to conduct a comprehensive search for English language, MS-based reference interval studies for serum/plasma steroids. Selection of steroids to include was based on those listed in the Royal College of Pathologists of Australasia Quality Assurance Programs, Chemical Pathology, Endocrine Program. This methodology has been registered onto the PROSPERO International prospective register of systematic reviews (ID number: CRD42015029637). After accounting for duplicates, a total of 60 manuscripts were identified through the search strategy. Following critical evaluation, a total of 16 studies were selected. Of the 16 studies, 12 reported reference intervals for testosterone, 11 for 17 hydroxy-progesterone, nine for androstenedione, six for cortisol, three for progesterone, two for dihydrotestosterone and only one for aldosterone and dehydroepiandrosterone sulphate. No studies established MS-based reference intervals for oestradiol. As far as we are aware, this report provides the first comparison of the peer reviewed literature for serum/plasma steroid reference intervals generated by MS-based methods. The reference intervals based on these published studies can be used to inform the process to develop common reference intervals, and agreed reporting units for mass spectrometry based steroid methods. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Extracellular matrix inspired surface functionalization with heparin, fibronectin and VEGF provides an anticoagulant and endothelialization supporting microenvironment

International Nuclear Information System (INIS)

Wang, Xue; Liu, Tao; Chen, Yuan; Zhang, Kun; Maitz, Manfred F.; Pan, Changjiang; Chen, Junying; Huang, Nan

2014-01-01

Highlights: • Surface modification with fibronectin, heparin and VEGF could selectively anticoagulant and promote endothelialization. • The bioactivity of biomolecules was more efficiently maintained via specific intermolecular interaction. • Poly-l-lysine interlayer was more feasible and the degradation product had no harm to human body. - Abstract: The biocompatibility of currently used coronary artery stent is still far from perfect, which closely related to insufficient endothelialization and thrombus formation. In this study, heparin, fibronectin and VEGF were immobilized on Ti surface to construct a multifunctional microenvironment with favorable properties to inhibit thrombosis formation and promote endothelialization simultaneously. The microenvironment on Ti surface was characterized in detail and demonstrated that the Hep/Fn/VEGF biofunctional coating was constructed successfully on Ti surface. The influence of surface properties such as chemical composition, roughness, hydrophilicity, and binding density of biomolecules on the performances of hemocompatibility and cytocompatibility was evaluated and discussed. Modified surface significantly enhanced the AT III binding density and prolonged the clotting time. In vitro platelet adhesion and activation assays further proved that the modified surface presented favorable anti-coagulant property. In addition, the proliferation of endothelial progenitor cells (EPCs) and endothelial cells (ECs) on the Hep/Fn/VEGF biofunctional coating was significantly promoted. In conclusion, the Hep/Fn/VEGF biofunctional coating was successfully constructed with desirable anticoagulant and endothelialization supporting properties. This work may provide a promising approach for biofunctional surface modification of coronary artery stent to acquire a desired multifunctional microenvironment

Interval Neutrosophic Sets and Their Application in Multicriteria Decision Making Problems

Directory of Open Access Journals (Sweden)

Hong-yu Zhang

2014-01-01

Full Text Available As a generalization of fuzzy sets and intuitionistic fuzzy sets, neutrosophic sets have been developed to represent uncertain, imprecise, incomplete, and inconsistent information existing in the real world. And interval neutrosophic sets (INSs have been proposed exactly to address issues with a set of numbers in the real unit interval, not just a specific number. However, there are fewer reliable operations for INSs, as well as the INS aggregation operators and decision making method. For this purpose, the operations for INSs are defined and a comparison approach is put forward based on the related research of interval valued intuitionistic fuzzy sets (IVIFSs in this paper. On the basis of the operations and comparison approach, two interval neutrosophic number aggregation operators are developed. Then, a method for multicriteria decision making problems is explored applying the aggregation operators. In addition, an example is provided to illustrate the application of the proposed method.

Sample size planning for composite reliability coefficients: accuracy in parameter estimation via narrow confidence intervals.

Science.gov (United States)

Terry, Leann; Kelley, Ken

2012-11-01

Composite measures play an important role in psychology and related disciplines. Composite measures almost always have error. Correspondingly, it is important to understand the reliability of the scores from any particular composite measure. However, the point estimates of the reliability of composite measures are fallible and thus all such point estimates should be accompanied by a confidence interval. When confidence intervals are wide, there is much uncertainty in the population value of the reliability coefficient. Given the importance of reporting confidence intervals for estimates of reliability, coupled with the undesirability of wide confidence intervals, we develop methods that allow researchers to plan sample size in order to obtain narrow confidence intervals for population reliability coefficients. We first discuss composite reliability coefficients and then provide a discussion on confidence interval formation for the corresponding population value. Using the accuracy in parameter estimation approach, we develop two methods to obtain accurate estimates of reliability by planning sample size. The first method provides a way to plan sample size so that the expected confidence interval width for the population reliability coefficient is sufficiently narrow. The second method ensures that the confidence interval width will be sufficiently narrow with some desired degree of assurance (e.g., 99% assurance that the 95% confidence interval for the population reliability coefficient will be less than W units wide). The effectiveness of our methods was verified with Monte Carlo simulation studies. We demonstrate how to easily implement the methods with easy-to-use and freely available software. ©2011 The British Psychological Society.

Relativistic rise measurements with very fine sampling intervals

International Nuclear Information System (INIS)

Ludlam, T.; Platner, E.D.; Polychronakos, V.A.; Lindenbaum, S.J.; Kramer, M.A.; Teramoto, Y.

1980-01-01

The motivation of this work was to determine whether the technique of charged particle identification via the relativistic rise in the ionization loss can be significantly improved by virtue of very small sampling intervals. A fast-sampling ADC and a longitudinal drift geometry were used to provide a large number of samples from a single drift chamber gap, achieving sampling intervals roughly 10 times smaller than any previous study. A single layer drift chamber was used, and tracks of 1 meter length were simulated by combining together samples from many identified particles in this detector. These data were used to study the resolving power for particle identification as a function of sample size, averaging technique, and the number of discrimination levels (ADC bits) used for pulse height measurements

Calculation of solar irradiation prediction intervals combining volatility and kernel density estimates

International Nuclear Information System (INIS)

Trapero, Juan R.

2016-01-01

In order to integrate solar energy into the grid it is important to predict the solar radiation accurately, where forecast errors can lead to significant costs. Recently, the increasing statistical approaches that cope with this problem is yielding a prolific literature. In general terms, the main research discussion is centred on selecting the “best” forecasting technique in accuracy terms. However, the need of the users of such forecasts require, apart from point forecasts, information about the variability of such forecast to compute prediction intervals. In this work, we will analyze kernel density estimation approaches, volatility forecasting models and combination of both of them in order to improve the prediction intervals performance. The results show that an optimal combination in terms of prediction interval statistical tests can achieve the desired confidence level with a lower average interval width. Data from a facility located in Spain are used to illustrate our methodology. - Highlights: • This work explores uncertainty forecasting models to build prediction intervals. • Kernel density estimators, exponential smoothing and GARCH models are compared. • An optimal combination of methods provides the best results. • A good compromise between coverage and average interval width is shown.

Interval methods: An introduction

DEFF Research Database (Denmark)

Achenie, L.E.K.; Kreinovich, V.; Madsen, Kaj

2006-01-01

This chapter contains selected papers presented at the Minisymposium on Interval Methods of the PARA'04 Workshop '' State-of-the-Art in Scientific Computing ''. The emphasis of the workshop was on high-performance computing (HPC). The ongoing development of ever more advanced computers provides...... the potential for solving increasingly difficult computational problems. However, given the complexity of modern computer architectures, the task of realizing this potential needs careful attention. A main concern of HPC is the development of software that optimizes the performance of a given computer....... An important characteristic of the computer performance in scientific computing is the accuracy of the Computation results. Often, we can estimate this accuracy by using traditional statistical techniques. However, in many practical situations, we do not know the probability distributions of different...

Frequency interval balanced truncation of discrete-time bilinear systems

DEFF Research Database (Denmark)

Jazlan, Ahmad; Sreeram, Victor; Shaker, Hamid Reza

2016-01-01

This paper presents the development of a new model reduction method for discrete-time bilinear systems based on the balanced truncation framework. In many model reduction applications, it is advantageous to analyze the characteristics of the system with emphasis on particular frequency intervals...... are the solution to a pair of new generalized Lyapunov equations. The conditions for solvability of these new generalized Lyapunov equations are derived and a numerical solution method for solving these generalized Lyapunov equations is presented. Numerical examples which illustrate the usage of the new...... generalized frequency interval controllability and observability gramians as part of the balanced truncation framework are provided to demonstrate the performance of the proposed method....

Design and Analysis of Schemes for Adapting Migration Intervals in Parallel Evolutionary Algorithms.

Science.gov (United States)

Mambrini, Andrea; Sudholt, Dirk

2015-01-01

The migration interval is one of the fundamental parameters governing the dynamic behaviour of island models. Yet, there is little understanding on how this parameter affects performance, and how to optimally set it given a problem in hand. We propose schemes for adapting the migration interval according to whether fitness improvements have been found. As long as no improvement is found, the migration interval is increased to minimise communication. Once the best fitness has improved, the migration interval is decreased to spread new best solutions more quickly. We provide a method for obtaining upper bounds on the expected running time and the communication effort, defined as the expected number of migrants sent. Example applications of this method to common example functions show that our adaptive schemes are able to compete with, or even outperform, the optimal fixed choice of the migration interval, with regard to running time and communication effort.

Continuous time modelling with individually varying time intervals for oscillating and non-oscillating processes.

Science.gov (United States)

Voelkle, Manuel C; Oud, Johan H L

2013-02-01

When designing longitudinal studies, researchers often aim at equal intervals. In practice, however, this goal is hardly ever met, with different time intervals between assessment waves and different time intervals between individuals being more the rule than the exception. One of the reasons for the introduction of continuous time models by means of structural equation modelling has been to deal with irregularly spaced assessment waves (e.g., Oud & Delsing, 2010). In the present paper we extend the approach to individually varying time intervals for oscillating and non-oscillating processes. In addition, we show not only that equal intervals are unnecessary but also that it can be advantageous to use unequal sampling intervals, in particular when the sampling rate is low. Two examples are provided to support our arguments. In the first example we compare a continuous time model of a bivariate coupled process with varying time intervals to a standard discrete time model to illustrate the importance of accounting for the exact time intervals. In the second example the effect of different sampling intervals on estimating a damped linear oscillator is investigated by means of a Monte Carlo simulation. We conclude that it is important to account for individually varying time intervals, and encourage researchers to conceive of longitudinal studies with different time intervals within and between individuals as an opportunity rather than a problem. © 2012 The British Psychological Society.

Geometric Least Square Models for Deriving [0,1]-Valued Interval Weights from Interval Fuzzy Preference Relations Based on Multiplicative Transitivity

Directory of Open Access Journals (Sweden)

Xuan Yang

2015-01-01

Full Text Available This paper presents a geometric least square framework for deriving [0,1]-valued interval weights from interval fuzzy preference relations. By analyzing the relationship among [0,1]-valued interval weights, multiplicatively consistent interval judgments, and planes, a geometric least square model is developed to derive a normalized [0,1]-valued interval weight vector from an interval fuzzy preference relation. Based on the difference ratio between two interval fuzzy preference relations, a geometric average difference ratio between one interval fuzzy preference relation and the others is defined and employed to determine the relative importance weights for individual interval fuzzy preference relations. A geometric least square based approach is further put forward for solving group decision making problems. An individual decision numerical example and a group decision making problem with the selection of enterprise resource planning software products are furnished to illustrate the effectiveness and applicability of the proposed models.

Recurrence interval analysis of trading volumes.

Science.gov (United States)

Ren, Fei; Zhou, Wei-Xing

2010-06-01

We study the statistical properties of the recurrence intervals τ between successive trading volumes exceeding a certain threshold q. The recurrence interval analysis is carried out for the 20 liquid Chinese stocks covering a period from January 2000 to May 2009, and two Chinese indices from January 2003 to April 2009. Similar to the recurrence interval distribution of the price returns, the tail of the recurrence interval distribution of the trading volumes follows a power-law scaling, and the results are verified by the goodness-of-fit tests using the Kolmogorov-Smirnov (KS) statistic, the weighted KS statistic and the Cramér-von Mises criterion. The measurements of the conditional probability distribution and the detrended fluctuation function show that both short-term and long-term memory effects exist in the recurrence intervals between trading volumes. We further study the relationship between trading volumes and price returns based on the recurrence interval analysis method. It is found that large trading volumes are more likely to occur following large price returns, and the comovement between trading volumes and price returns is more pronounced for large trading volumes.

A novel approach based on preference-based index for interval bilevel linear programming problem.

Science.gov (United States)

Ren, Aihong; Wang, Yuping; Xue, Xingsi

2017-01-01

This paper proposes a new methodology for solving the interval bilevel linear programming problem in which all coefficients of both objective functions and constraints are considered as interval numbers. In order to keep as much uncertainty of the original constraint region as possible, the original problem is first converted into an interval bilevel programming problem with interval coefficients in both objective functions only through normal variation of interval number and chance-constrained programming. With the consideration of different preferences of different decision makers, the concept of the preference level that the interval objective function is preferred to a target interval is defined based on the preference-based index. Then a preference-based deterministic bilevel programming problem is constructed in terms of the preference level and the order relation [Formula: see text]. Furthermore, the concept of a preference δ -optimal solution is given. Subsequently, the constructed deterministic nonlinear bilevel problem is solved with the help of estimation of distribution algorithm. Finally, several numerical examples are provided to demonstrate the effectiveness of the proposed approach.

A novel approach based on preference-based index for interval bilevel linear programming problem

Directory of Open Access Journals (Sweden)

Aihong Ren

2017-05-01

Full Text Available Abstract This paper proposes a new methodology for solving the interval bilevel linear programming problem in which all coefficients of both objective functions and constraints are considered as interval numbers. In order to keep as much uncertainty of the original constraint region as possible, the original problem is first converted into an interval bilevel programming problem with interval coefficients in both objective functions only through normal variation of interval number and chance-constrained programming. With the consideration of different preferences of different decision makers, the concept of the preference level that the interval objective function is preferred to a target interval is defined based on the preference-based index. Then a preference-based deterministic bilevel programming problem is constructed in terms of the preference level and the order relation ⪯ m w $\\preceq_{mw}$ . Furthermore, the concept of a preference δ-optimal solution is given. Subsequently, the constructed deterministic nonlinear bilevel problem is solved with the help of estimation of distribution algorithm. Finally, several numerical examples are provided to demonstrate the effectiveness of the proposed approach.

Exponential operations and aggregation operators of interval neutrosophic sets and their decision making methods.

Science.gov (United States)

Ye, Jun

2016-01-01

An interval neutrosophic set (INS) is a subclass of a neutrosophic set and a generalization of an interval-valued intuitionistic fuzzy set, and then the characteristics of INS are independently described by the interval numbers of its truth-membership, indeterminacy-membership, and falsity-membership degrees. However, the exponential parameters (weights) of all the existing exponential operational laws of INSs and the corresponding exponential aggregation operators are crisp values in interval neutrosophic decision making problems. As a supplement, this paper firstly introduces new exponential operational laws of INSs, where the bases are crisp values or interval numbers and the exponents are interval neutrosophic numbers (INNs), which are basic elements in INSs. Then, we propose an interval neutrosophic weighted exponential aggregation (INWEA) operator and a dual interval neutrosophic weighted exponential aggregation (DINWEA) operator based on these exponential operational laws and introduce comparative methods based on cosine measure functions for INNs and dual INNs. Further, we develop decision-making methods based on the INWEA and DINWEA operators. Finally, a practical example on the selecting problem of global suppliers is provided to illustrate the applicability and rationality of the proposed methods.

Expressing Intervals in Automated Service Negotiation

Science.gov (United States)

Clark, Kassidy P.; Warnier, Martijn; van Splunter, Sander; Brazier, Frances M. T.

During automated negotiation of services between autonomous agents, utility functions are used to evaluate the terms of negotiation. These terms often include intervals of values which are prone to misinterpretation. It is often unclear if an interval embodies a continuum of real numbers or a subset of natural numbers. Furthermore, it is often unclear if an agent is expected to choose only one value, multiple values, a sub-interval or even multiple sub-intervals. Additional semantics are needed to clarify these issues. Normally, these semantics are stored in a domain ontology. However, ontologies are typically domain specific and static in nature. For dynamic environments, in which autonomous agents negotiate resources whose attributes and relationships change rapidly, semantics should be made explicit in the service negotiation. This paper identifies issues that are prone to misinterpretation and proposes a notation for expressing intervals. This notation is illustrated using an example in WS-Agreement.

A scoping review of the psychological responses to interval exercise: is interval exercise a viable alternative to traditional exercise?

Science.gov (United States)

Stork, Matthew J; Banfield, Laura E; Gibala, Martin J; Martin Ginis, Kathleen A

2017-12-01

While considerable evidence suggests that interval exercise confers numerous physiological adaptations linked to improved health, its psychological consequences and behavioural implications are less clear and the subject of intense debate. The purpose of this scoping review was to catalogue studies investigating the psychological responses to interval exercise in order to identify what psychological outcomes have been assessed, the research methods used, and the results. A secondary objective was to identify research issues and gaps. Forty-two published articles met the review inclusion/exclusion criteria. These studies involved 1258 participants drawn from various active/inactive and healthy/unhealthy populations, and 55 interval exercise protocols (69% high-intensity interval training [HIIT], 27% sprint interval training [SIT], and 4% body-weight interval training [BWIT]). Affect and enjoyment were the most frequently studied psychological outcomes. Post-exercise assessments indicate that overall, enjoyment of, and preferences for interval exercise are equal or greater than for continuous exercise, and participants can hold relatively positive social cognitions regarding interval exercise. Although several methodological issues (e.g., inconsistent use of terminology, measures and protocols) and gaps (e.g., data on adherence and real-world protocols) require attention, from a psychological perspective, the emerging data support the viability of interval exercise as an alternative to continuous exercise.

Confidence intervals for the lognormal probability distribution

International Nuclear Information System (INIS)

Smith, D.L.; Naberejnev, D.G.

2004-01-01

The present communication addresses the topic of symmetric confidence intervals for the lognormal probability distribution. This distribution is frequently utilized to characterize inherently positive, continuous random variables that are selected to represent many physical quantities in applied nuclear science and technology. The basic formalism is outlined herein and a conjured numerical example is provided for illustration. It is demonstrated that when the uncertainty reflected in a lognormal probability distribution is large, the use of a confidence interval provides much more useful information about the variable used to represent a particular physical quantity than can be had by adhering to the notion that the mean value and standard deviation of the distribution ought to be interpreted as best value and corresponding error, respectively. Furthermore, it is shown that if the uncertainty is very large a disturbing anomaly can arise when one insists on interpreting the mean value and standard deviation as the best value and corresponding error, respectively. Reliance on using the mode and median as alternative parameters to represent the best available knowledge of a variable with large uncertainties is also shown to entail limitations. Finally, a realistic physical example involving the decay of radioactivity over a time period that spans many half-lives is presented and analyzed to further illustrate the concepts discussed in this communication

Application of the entropic coefficient for interval number optimization during interval assessment

Directory of Open Access Journals (Sweden)

Tynynyka A. N.

2017-06-01

Full Text Available In solving many statistical problems, the most precise choice of the distribution law of a random variable is required, the sample of which the authors observe. This choice requires the construction of an interval series. Therefore, the problem arises of assigning an optimal number of intervals, and this study proposes a number of formulas for solving it. Which of these formulas solves the problem more accurately? In [9], this question is investigated using the Pearson criterion. This article describes the procedure and on its basis gives formulas available in literature and proposed new formulas using the entropy coefficient. A comparison is made with the previously published results of applying Pearson's concord criterion for these purposes. Differences in the estimates of the accuracy of the formulas are found. The proposed new formulas for calculating the number of intervals showed the best results. Calculations have been made to compare the work of the same formulas for the distribution of sample data according to the normal law and the Rayleigh law.

The fractal geometry of nutrient exchange surfaces does not provide an explanation for 3/4-power metabolic scaling

Directory of Open Access Journals (Sweden)

Painter Page R

2005-08-01

Full Text Available Abstract Background A prominent theoretical explanation for 3/4-power allometric scaling of metabolism proposes that the nutrient exchange surface of capillaries has properties of a space-filling fractal. The theory assumes that nutrient exchange surface area has a fractal dimension equal to or greater than 2 and less than or equal to 3 and that the volume filled by the exchange surface area has a fractal dimension equal to or greater than 3 and less than or equal to 4. Results It is shown that contradicting predictions can be derived from the assumptions of the model. When errors in the model are corrected, it is shown to predict that metabolic rate is proportional to body mass (proportional scaling. Conclusion The presence of space-filling fractal nutrient exchange surfaces does not provide a satisfactory explanation for 3/4-power metabolic rate scaling.

[Incidence of long (short) PR interval in electrocardiogram among healthy people in Changsha and its clinical significance].

Science.gov (United States)

Liu, Liping; Lin, Ping; Xu, Yi; Wu, Lijia; Zou, Runmei; Xie, Zhenwu; Wang, Cheng

2016-04-01

To analyze the incidence of long (short) PR interval in electrocardiogram among healthy people in Changsha and the clinical significance.
 Twelve-lead body surface electrocardiogram was taken to measure the heart rates and PR intervals from 4 025 healthy individuals (age range from 6 min after birth to 83 years old) who performed physical examination from Jan, 1993 to Dec, 2012 in the Second Xiangya Hospital, Central South University. Statistics were analyzed by SPSS 16.0.
 The total incidence of short PR interval was 19.65% (791/4 025). The age group from birth to 13 years old had a higher incidence than the other age groups (χ2=432, PPR intervals was 3.58% (144/4 025). The 1 year-old group had the highest incidence (6.74%), which decreased with the increase of age. The lowest incidence of long PR intervals occurred in the age group from 14-17 years old, which gradually increased after 50 years old. There were no significant differences in long (short) PR intervals between the gender (P>0.05).
 The incidence of long (short) PR intervals varies in different age groups of healthy people. The incidences of long (short) PR intervals in children before 10 years old are higher than those in adults, especially the short PR intervals, as a result of the heart rate affected by childhood autonomic nervous function and the change in atrial volume with age. Adults have long (short) PR interval should be regularly followed-up to prevent cardiovascular events.

Nanoscale surface characterization of aqueous copper corrosion: Effects of immersion interval and orthophosphate concentration

Energy Technology Data Exchange (ETDEWEB)

Daniels, Stephanie L. [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States); United States Environmental Protection Agency, National Risk Management Research Laboratory (NRMRL), Water Supply and Water Resource Division (WSWRD), Cincinnati, OH 45268 (United States); Sprunger, Phillip T. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Center for Advanced Microstructures and Devices, Synchrotron Radiation Facility of Louisiana State University, Baton Rouge, LA 70803 (United States); Kizilkaya, Orhan [Center for Advanced Microstructures and Devices, Synchrotron Radiation Facility of Louisiana State University, Baton Rouge, LA 70803 (United States); Lytle, Darren A. [United States Environmental Protection Agency, National Risk Management Research Laboratory (NRMRL), Water Supply and Water Resource Division (WSWRD), Cincinnati, OH 45268 (United States); Garno, Jayne C., E-mail: jgarno@lsu.edu [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States)

2013-11-15

Morphology changes for copper surfaces exposed to different water parameters were investigated at the nanoscale with atomic force microscopy (AFM), as influenced by changes in pH and the levels of orthophosphate ions. Synthetic water samples were designed to mimic physiological chemistries for drinking water, both with and without addition of orthophosphate over a pH range 6.5–9. Copper surfaces treated with orthophosphate as a corrosion inhibitor after 6 and 24 h were evaluated. Tapping mode AFM images revealed dosing of the water with 6 mg/L of orthophosphate was beneficial in retarding the growth of copper by-products. The chemical composition and oxidation state of the surface deposits were characterized with X-ray diffraction (XRD), near edge X-ray absorption fine structure (NEXAFS) spectroscopy and Fourier transform infrared spectroscopy (FTIR).

The effect of inter-set rest intervals on resistance exercise-induced muscle hypertrophy.

Science.gov (United States)

Henselmans, Menno; Schoenfeld, Brad J

2014-12-01

Due to a scarcity of longitudinal trials directly measuring changes in muscle girth, previous recommendations for inter-set rest intervals in resistance training programs designed to stimulate muscular hypertrophy were primarily based on the post-exercise endocrinological response and other mechanisms theoretically related to muscle growth. New research regarding the effects of inter-set rest interval manipulation on resistance training-induced muscular hypertrophy is reviewed here to evaluate current practices and provide directions for future research. Of the studies measuring long-term muscle hypertrophy in groups employing different rest intervals, none have found superior muscle growth in the shorter compared with the longer rest interval group and one study has found the opposite. Rest intervals less than 1 minute can result in acute increases in serum growth hormone levels and these rest intervals also decrease the serum testosterone to cortisol ratio. Long-term adaptations may abate the post-exercise endocrinological response and the relationship between the transient change in hormonal production and chronic muscular hypertrophy is highly contentious and appears to be weak. The relationship between the rest interval-mediated effect on immune system response, muscle damage, metabolic stress, or energy production capacity and muscle hypertrophy is still ambiguous and largely theoretical. In conclusion, the literature does not support the hypothesis that training for muscle hypertrophy requires shorter rest intervals than training for strength development or that predetermined rest intervals are preferable to auto-regulated rest periods in this regard.

Correct Bayesian and frequentist intervals are similar

International Nuclear Information System (INIS)

Atwood, C.L.

1986-01-01

This paper argues that Bayesians and frequentists will normally reach numerically similar conclusions, when dealing with vague data or sparse data. It is shown that both statistical methodologies can deal reasonably with vague data. With sparse data, in many important practical cases Bayesian interval estimates and frequentist confidence intervals are approximately equal, although with discrete data the frequentist intervals are somewhat longer. This is not to say that the two methodologies are equally easy to use: The construction of a frequentist confidence interval may require new theoretical development. Bayesians methods typically require numerical integration, perhaps over many variables. Also, Bayesian can easily fall into the trap of over-optimism about their amount of prior knowledge. But in cases where both intervals are found correctly, the two intervals are usually not very different. (orig.)

Confidence Intervals: From tests of statistical significance to confidence intervals, range hypotheses and substantial effects

Directory of Open Access Journals (Sweden)

Dominic Beaulieu-Prévost

2006-03-01

Full Text Available For the last 50 years of research in quantitative social sciences, the empirical evaluation of scientific hypotheses has been based on the rejection or not of the null hypothesis. However, more than 300 articles demonstrated that this method was problematic. In summary, null hypothesis testing (NHT is unfalsifiable, its results depend directly on sample size and the null hypothesis is both improbable and not plausible. Consequently, alternatives to NHT such as confidence intervals (CI and measures of effect size are starting to be used in scientific publications. The purpose of this article is, first, to provide the conceptual tools necessary to implement an approach based on confidence intervals, and second, to briefly demonstrate why such an approach is an interesting alternative to an approach based on NHT. As demonstrated in the article, the proposed CI approach avoids most problems related to a NHT approach and can often improve the scientific and contextual relevance of the statistical interpretations by testing range hypotheses instead of a point hypothesis and by defining the minimal value of a substantial effect. The main advantage of such a CI approach is that it replaces the notion of statistical power by an easily interpretable three-value logic (probable presence of a substantial effect, probable absence of a substantial effect and probabilistic undetermination. The demonstration includes a complete example.

Short QT interval is unreliable marker of anabolic androgenic steroid abuse in competitive athletes

Directory of Open Access Journals (Sweden)

Đorđević Vitomir

2012-01-01

Full Text Available Introduction. Previous animal and human studies provided the evidence that testosterone may affect ventricular repolarization by shortening of the QT interval. Synthetic derivatives of testosterone, modified to enhance its anabolic properties, are occasionally abused by some competitive athletes. Objective. We assessed whether the QT interval duration could discriminate androgenic anabolic steroids (AAS-using strength athletes (SA from drug-free endurance athletes (EA, by comparing 25 formulas for QT interval correction. Methods. We recruited 22 elite male athletes involved in long-term strength or endurance training and 20 sedentary controls. All elite

Technical note: Instantaneous sampling intervals validated from continuous video observation for behavioral recording of feedlot lambs.

Science.gov (United States)

Pullin, A N; Pairis-Garcia, M D; Campbell, B J; Campler, M R; Proudfoot, K L

2017-11-01

When considering methodologies for collecting behavioral data, continuous sampling provides the most complete and accurate data set whereas instantaneous sampling can provide similar results and also increase the efficiency of data collection. However, instantaneous time intervals require validation to ensure accurate estimation of the data. Therefore, the objective of this study was to validate scan sampling intervals for lambs housed in a feedlot environment. Feeding, lying, standing, drinking, locomotion, and oral manipulation were measured on 18 crossbred lambs housed in an indoor feedlot facility for 14 h (0600-2000 h). Data from continuous sampling were compared with data from instantaneous scan sampling intervals of 5, 10, 15, and 20 min using a linear regression analysis. Three criteria determined if a time interval accurately estimated behaviors: 1) ≥ 0.90, 2) slope not statistically different from 1 ( > 0.05), and 3) intercept not statistically different from 0 ( > 0.05). Estimations for lying behavior were accurate up to 20-min intervals, whereas feeding and standing behaviors were accurate only at 5-min intervals (i.e., met all 3 regression criteria). Drinking, locomotion, and oral manipulation demonstrated poor associations () for all tested intervals. The results from this study suggest that a 5-min instantaneous sampling interval will accurately estimate lying, feeding, and standing behaviors for lambs housed in a feedlot, whereas continuous sampling is recommended for the remaining behaviors. This methodology will contribute toward the efficiency, accuracy, and transparency of future behavioral data collection in lamb behavior research.

High-Intensity Interval Training in Normobaric Hypoxia Leads to Greater Body Fat Loss in Overweight/Obese Women than High-Intensity Interval Training in Normoxia.

Science.gov (United States)

Camacho-Cardenosa, Alba; Camacho-Cardenosa, Marta; Burtscher, Martin; Martínez-Guardado, Ismael; Timon, Rafael; Brazo-Sayavera, Javier; Olcina, Guillermo

2018-01-01

A moderate hypoxic stimulus is considered a promising therapeutic modality for several pathological states including obesity. There is scientific evidence suggesting that when hypoxia and physical activity are combined, they could provide benefits for the obese population. The aim of the present study was to investigate if exposure to hypoxia combined with two different protocols of high-intensity interval exercise in overweight/obese women was more effective compared with exercise in normoxia. Study participants included 82 overweight/obese women, who started a 12 week program of 36 sessions, and were randomly divided into four groups: (1) aerobic interval training in hypoxia (AitH; FiO 2 = 17.2%; n = 13), (2) aerobic interval training in normoxia (AitN; n = 15), (3) sprint interval training in hypoxia (SitH; n = 15), and (4) sprint interval training in normoxia (SitN; n = 18). Body mass, body mass index, percentage of total fat mass, muscle mass, basal metabolic rate, fat, and carbohydrate oxidation, and fat and carbohydrate energy were assessed. Outcomes were measured at baseline (T1), after 18 training sessions (T2), 7 days after the last session (T3), and 4 weeks after the last session (T4). The fat mass in the SitH group was significantly reduced compared with the SitN group from T1 to T3 ( p Fat mass in the AitH group decreased significantly ( p fat mass, with a statistically significant reduction in the hypoxia groups ( p fat oxidation tended to increase and oxidation of carbohydrates tended to decrease in both hypoxia groups, the tendency was reversed in the normoxia groups. Thus, high-intensity interval training under normobaric intermittent hypoxia for 12 weeks in overweight/obese women seems to be promising for reducing body fat content with a concomitant increase in muscle mass.

Increases of QT dispersion, corrected QT dispersion and QT interval in young healthy individuals during Ramadan fasting

Directory of Open Access Journals (Sweden)

Moradmand S

2003-06-01

Full Text Available Ramadan fasting is one of the most important religious duties of Muslims, that its effect on the heart has not been determined yet. Our objective was to evaluate the effect of Ramadan fasting on ventricular repolarization as assessed by QT interval, corrected QT interval, QT dispersion or corrected QT dispersion. Sixthy healthy subjects aged 20 to 35 years were dispersion included in this study. QT interval, corrected QT interval (QTc QT dispersion QTc dispersion, RR interval and QRS axis were measured in 12-lead surface electrocardiogram, once during fasting (10 to 11.5 hours of absolute fasting from food and liquid and another time, 15 tp 60 minutes after eating food at sunset, All of the subjects had been fasting 11 to 12 hours each day at least for 25 days during Ramadan. The study was performed at Amir Alam hospital in the year 2000. Maximal QT interval, mean QT interval and RR-interval, were longer during fasting (P<0.05, and both QT dispersion and QTc dispersion were increased (P<0.05. (QT dispersion: mean ±SD= 57.2±20.1 ms during fasting Vs 41.6±15.1 ms after meal, QTc dispersion=75.4±24.6 ms during fasting Vs 64.1±22.8 ms after meal. But mean QTc interval maximal QTc interval and QRS axis showed no significant difference. Prolongation of QT interval and RR interval during fasting, instead of no significant changes in corrected QT interval may primarily suggest that prolongation of RR-interval causes QTc interval not to have significant difference. But increases of QT dispersion and corrected QT dispersion (QTc dispersion during fasting -that are more reliable indicators of ventricular repolarization-support the idea that ventricular repolarization may be changed during Ramadan fasting. QT dispersion in cardiac patients is showed to increase from normal values of 30-40 to 64-138 ms, but in our study their increases did not reach critical value.

Haemostatic reference intervals in pregnancy

DEFF Research Database (Denmark)

Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna

2010-01-01

Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age-specific refe......Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-specific reference intervals for coagulation tests during normal pregnancy. Eight hundred one women with expected normal pregnancies were included in the study. Of these women, 391 had no complications during pregnancy, vaginal delivery, or postpartum period. Plasma samples were obtained at gestational weeks 13......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...

Reference Intervals of Alpha-Fetoprotein and Carcinoembryonic Antigen in the Apparently Healthy Population.

Science.gov (United States)

Zhang, Gao-Ming; Guo, Xu-Xiao; Ma, Xiao-Bo; Zhang, Guo-Ming

2016-12-12

BACKGROUND The aim of this study was to calculate 95% reference intervals and double-sided limits of serum alpha-fetoprotein (AFP) and carcinoembryonic antigen (CEA) according to the CLSI EP28-A3 guideline. MATERIAL AND METHODS Serum AFP and CEA values were measured in samples from 26 000 healthy subjects in the Shuyang area receiving general health checkups. The 95% reference intervals and upper limits were calculated by using MedCalc. RESULTS We provided continuous reference intervals from 20 years old to 90 years old for AFP and CEA. The reference intervals were: AFP, 1.31-7.89 ng/ml (males) and 1.01-7.10 ng/ml (females); CEA, 0.51-4.86 ng/ml (males) and 0.35-3.45ng/ml (females). AFP and CEA were significantly positively correlated with age in both males (r=0.196 and r=0.198) and females (r=0.121 and r=0.197). CONCLUSIONS Different races or populations and different detection systems may result in different reference intervals for AFP and CEA. Continuous reference intervals of age changes are more accurate than age groups.

Mechanisms of Surface-Mediated DNA Hybridization

Science.gov (United States)

2015-01-01

Single-molecule total internal reflection fluorescence microscopy was employed in conjunction with resonance energy transfer (RET) to observe the dynamic behavior of donor-labeled ssDNA at the interface between aqueous solution and a solid surface decorated with complementary acceptor-labeled ssDNA. At least 100 000 molecular trajectories were determined for both complementary strands and negative control ssDNA. RET was used to identify trajectory segments corresponding to the hybridized state. The vast majority of molecules from solution adsorbed nonspecifically to the surface, where a brief two-dimensional search was performed with a 7% chance of hybridization. Successful hybridization events occurred with a characteristic search time of ∼0.1 s, and unsuccessful searches resulted in desorption from the surface, ultimately repeating the adsorption and search process. Hybridization was reversible, and two distinct modes of melting (i.e., dehybridization) were observed, corresponding to long-lived (∼15 s) and short-lived (∼1.4 s) hybridized time intervals. A strand that melted back onto the surface could rehybridize after a brief search or desorb from the interface. These mechanistic observations provide guidance for technologies that involve DNA interactions in the near-surface region, suggesting a need to design surfaces that both enhance the complex multidimensional search process and stabilize the hybridized state. PMID:24708278

Optimal Data Interval for Estimating Advertising Response

OpenAIRE

Gerard J. Tellis; Philip Hans Franses

2006-01-01

The abundance of highly disaggregate data (e.g., at five-second intervals) raises the question of the optimal data interval to estimate advertising carryover. The literature assumes that (1) the optimal data interval is the interpurchase time, (2) too disaggregate data causes a disaggregation bias, and (3) recovery of true parameters requires assumption of the underlying advertising process. In contrast, we show that (1) the optimal data interval is what we call , (2) too disaggregate data do...

Consistency and refinement for Interval Markov Chains

DEFF Research Database (Denmark)

Delahaye, Benoit; Larsen, Kim Guldstrand; Legay, Axel

2012-01-01

Interval Markov Chains (IMC), or Markov Chains with probability intervals in the transition matrix, are the base of a classic specification theory for probabilistic systems [18]. The standard semantics of IMCs assigns to a specification the set of all Markov Chains that satisfy its interval...

Computation of robustly stabilizing PID controllers for interval systems.

Science.gov (United States)

Matušů, Radek; Prokop, Roman

2016-01-01

The paper is focused on the computation of all possible robustly stabilizing Proportional-Integral-Derivative (PID) controllers for plants with interval uncertainty. The main idea of the proposed method is based on Tan's (et al.) technique for calculation of (nominally) stabilizing PI and PID controllers or robustly stabilizing PI controllers by means of plotting the stability boundary locus in either P-I plane or P-I-D space. Refinement of the existing method by consideration of 16 segment plants instead of 16 Kharitonov plants provides an elegant and efficient tool for finding all robustly stabilizing PID controllers for an interval system. The validity and relatively effortless application of presented theoretical concepts are demonstrated through a computation and simulation example in which the uncertain mathematical model of an experimental oblique wing aircraft is robustly stabilized.

Global robust exponential stability analysis for interval recurrent neural networks

International Nuclear Information System (INIS)

Xu Shengyuan; Lam, James; Ho, Daniel W.C.; Zou Yun

2004-01-01

This Letter investigates the problem of robust global exponential stability analysis for interval recurrent neural networks (RNNs) via the linear matrix inequality (LMI) approach. The values of the time-invariant uncertain parameters are assumed to be bounded within given compact sets. An improved condition for the existence of a unique equilibrium point and its global exponential stability of RNNs with known parameters is proposed. Based on this, a sufficient condition for the global robust exponential stability for interval RNNs is obtained. Both of the conditions are expressed in terms of LMIs, which can be checked easily by various recently developed convex optimization algorithms. Examples are provided to demonstrate the reduced conservatism of the proposed exponential stability condition

Multiplicative Consistency for Interval Valued Reciprocal Preference Relations

OpenAIRE

Wu, Jian; Chiclana, Francisco

2014-01-01

The multiplicative consistency (MC) property of interval additive reciprocal preference relations (IARPRs) is explored, and then the consistency index is quantified by the multiplicative consistency estimated IARPR. The MC property is used to measure the level of consistency of the information provided by the experts and also to propose the consistency index induced ordered weighted averaging (CI-IOWA) operator. The novelty of this operator is that it aggregates individual IARPRs in such ...

Optimization of the Reconstruction Interval in Neurovascular 4D-CTA Imaging

Science.gov (United States)

Hoogenboom, T.C.H.; van Beurden, R.M.J.; van Teylingen, B.; Schenk, B.; Willems, P.W.A.

2012-01-01

Summary Time resolved whole brain CT angiography (4D-CTA) is a novel imaging technology providing information regarding blood flow. One of the factors that influence the diagnostic value of this examination is the temporal resolution, which is affected by the gantry rotation speed during acquisition and the reconstruction interval during post-processing. Post-processing determines the time spacing between two reconstructed volumes and, unlike rotation speed, does not affect radiation burden. The data sets of six patients who underwent a cranial 4D-CTA were used for this study. Raw data was acquired using a 320-slice scanner with a rotation speed of 2 Hz. The arterial to venous passage of an intravenous contrast bolus was captured during a 15 s continuous scan. The raw data was reconstructed using four different reconstruction-intervals: 0.2, 0.3, 0.5 and 1.0 s. The results were rated by two observers using a standardized score sheet. The appearance of each lesion was rated correctly in all readings. Scoring for quality of temporal resolution revealed a stepwise improvement from the 1.0 s interval to the 0.3 s interval, while no discernable improvement was noted between the 0.3 s and 0.2 s interval. An increase in temporal resolution may improve the diagnostic quality of cranial 4D-CTA. Using a rotation speed of 0.5 s, the optimal reconstruction interval appears to be 0.3 s, beyond which, changes can no longer be discerned. PMID:23217631

Advanced Interval Management: A Benefit Analysis

Science.gov (United States)

Timer, Sebastian; Peters, Mark

2016-01-01

This document is the final report for the NASA Langley Research Center (LaRC)- sponsored task order 'Possible Benefits for Advanced Interval Management Operations.' Under this research project, Architecture Technology Corporation performed an analysis to determine the maximum potential benefit to be gained if specific Advanced Interval Management (AIM) operations were implemented in the National Airspace System (NAS). The motivation for this research is to guide NASA decision-making on which Interval Management (IM) applications offer the most potential benefit and warrant further research.

Short-interval and long-interval intracortical inhibition of TMS-evoked EEG potentials.

Science.gov (United States)

Premoli, Isabella; Király, Julia; Müller-Dahlhaus, Florian; Zipser, Carl M; Rossini, Pierre; Zrenner, Christoph; Ziemann, Ulf; Belardinelli, Paolo

2018-03-15

Inhibition in the human motor cortex can be probed by means of paired-pulse transcranial magnetic stimulation (ppTMS) at interstimulus intervals of 2-3 ms (short-interval intracortical inhibition, SICI) or ∼100 ms (long-interval intracortical inhibition, LICI). Conventionally, SICI and LICI are recorded as motor evoked potential (MEP) inhibition in the hand muscle. Pharmacological experiments indicate that they are mediated by GABAA and GABAB receptors, respectively. SICI and LICI of TMS-evoked EEG potentials (TEPs) and their pharmacological properties have not been systematically studied. Here, we sought to examine SICI by ppTMS-evoked compared to single-pulse TMS-evoked TEPs, to investigate its pharmacological manipulation and to compare SICI with our previous results on LICI. PpTMS-EEG was applied to the left motor cortex in 16 healthy subjects in a randomized, double-blind placebo-controlled crossover design, testing the effects of a single oral dose 20 mg of diazepam, a positive modulator at the GABAA receptor, vs. 50 mg of the GABAB receptor agonist baclofen on SICI of TEPs. We found significant SICI of the N100 and P180 TEPs prior to drug intake. Diazepam reduced SICI of the N100 TEP, while baclofen enhanced it. Compared to our previous ppTMS-EEG results on LICI, the SICI effects on TEPs, including their drug modulation, were largely analogous. Findings suggest a similar interaction of paired-pulse effects on TEPs irrespective of the interstimulus interval. Therefore, SICI and LICI as measured with TEPs cannot be directly derived from SICI and LICI measured with MEPs, but may offer novel insight into paired-pulse responses recorded directly from the brain rather than muscle. Copyright © 2018 Elsevier Inc. All rights reserved.

Periodic, chaotic, and doubled earthquake recurrence intervals on the deep San Andreas fault.

Science.gov (United States)

Shelly, David R

2010-06-11

Earthquake recurrence histories may provide clues to the timing of future events, but long intervals between large events obscure full recurrence variability. In contrast, small earthquakes occur frequently, and recurrence intervals are quantifiable on a much shorter time scale. In this work, I examine an 8.5-year sequence of more than 900 recurring low-frequency earthquake bursts composing tremor beneath the San Andreas fault near Parkfield, California. These events exhibit tightly clustered recurrence intervals that, at times, oscillate between approximately 3 and approximately 6 days, but the patterns sometimes change abruptly. Although the environments of large and low-frequency earthquakes are different, these observations suggest that similar complexity might underlie sequences of large earthquakes.

Periodic, chaotic, and doubled earthquake recurrence intervals on the deep San Andreas Fault

Science.gov (United States)

Shelly, David R.

2010-01-01

Earthquake recurrence histories may provide clues to the timing of future events, but long intervals between large events obscure full recurrence variability. In contrast, small earthquakes occur frequently, and recurrence intervals are quantifiable on a much shorter time scale. In this work, I examine an 8.5-year sequence of more than 900 recurring low-frequency earthquake bursts composing tremor beneath the San Andreas fault near Parkfield, California. These events exhibit tightly clustered recurrence intervals that, at times, oscillate between ~3 and ~6 days, but the patterns sometimes change abruptly. Although the environments of large and low-frequency earthquakes are different, these observations suggest that similar complexity might underlie sequences of large earthquakes.

HORMONAL RESPONSE TO DIFFERENT REST INTERVALS DURING RESISTANCE TRAINING WITH LIGHT LOADS

Directory of Open Access Journals (Sweden)

Payam Mohamad-Panahi

2014-02-01

heavy load. Also, load effect was statistically significant only in 90 seconds rest interval trials and rest interval effect was statistically significant only in heavy load trials (p<0.05. Conclusions: Based on these results it can be concluded that when resistance training with light loads, higher resting interval (240 seconds may be provides a better anabolic environment for muscle growth and keep the training intensity.

HORMONAL RESPONSE TO DIFFERENT REST INTERVALS DURING RESISTANCE TRAINING WITH LIGHT LOADS

Directory of Open Access Journals (Sweden)

Payam Mohamad-Panahi

2014-02-01

load. Also, load effect was statistically significant only in 90 seconds rest interval trials and rest interval effect was statistically significant only in heavy load trials (p<0.05. Conclusions: Based on these results it can be concluded that when resistance training with light loads, higher resting interval (240 seconds may be provides a better anabolic environment for muscle growth and keep the training intensity.

Surface conductivity of Mercury provides current closure and may affect magnetospheric symmetry

Directory of Open Access Journals (Sweden)

P. Janhunen

2004-04-01

Full Text Available We study what effect a possible surface conductivity of Mercury has on the closure of magnetospheric currents by making six runs with a quasi-neutral hybrid simulation. The runs are otherwise identical but use different synthetic conductivity models: run 1 has a fully conducting planet, run 2 has a poorly conducting planet ( m and runs 3-6 have one of the hemispheres either in the dawn-dusk or day-night directions, conducting well, the other one being conducting poorly. Although the surface conductivity is not known from observations, educated guesses easily give such conductivity values that magnetospheric currents may close partly within the planet, and as the conductivity depends heavily on the mineral composition of the surface, the possibility of significant horizontal variations cannot be easily excluded. The simulation results show that strong horizontal variations may produce modest magnetospheric asymmetries. Beyond the hybrid simulation, we also briefly discuss the possibility that in the nightside there may be a lack of surface electrons to carry downward current, which may act as a further source of surface-related magnetospheric asymmetry. Key words. Magnetospheric physics (planetary magnetospheres; current systems; solar wind-magnetosphere interactions.6

Identifying women with dense breasts at high risk for interval cancer: a cohort study.

Science.gov (United States)

Kerlikowske, Karla; Zhu, Weiwei; Tosteson, Anna N A; Sprague, Brian L; Tice, Jeffrey A; Lehman, Constance D; Miglioretti, Diana L

2015-05-19

Twenty-one states have laws requiring that women be notified if they have dense breasts and that they be advised to discuss supplemental imaging with their provider. To better direct discussions of supplemental imaging by determining which combinations of breast cancer risk and Breast Imaging Reporting and Data System (BI-RADS) breast density categories are associated with high interval cancer rates. Prospective cohort. Breast Cancer Surveillance Consortium (BCSC) breast imaging facilities. 365,426 women aged 40 to 74 years who had 831,455 digital screening mammography examinations. BI-RADS breast density, BCSC 5-year breast cancer risk, and interval cancer rate (invasive cancer ≤12 months after a normal mammography result) per 1000 mammography examinations. High interval cancer rate was defined as more than 1 case per 1000 examinations. High interval cancer rates were observed for women with 5-year risk of 1.67% or greater and extremely dense breasts or 5-year risk of 2.50% or greater and heterogeneously dense breasts (24% of all women with dense breasts). The interval rate of advanced-stage disease was highest (>0.4 case per 1000 examinations) among women with 5-year risk of 2.50% or greater and heterogeneously or extremely dense breasts (21% of all women with dense breasts). Five-year risk was low to average (0% to 1.66%) for 51.0% of women with heterogeneously dense breasts and 52.5% with extremely dense breasts, with interval cancer rates of 0.58 to 0.63 and 0.72 to 0.89 case per 1000 examinations, respectively. The benefit of supplemental imaging was not assessed. Breast density should not be the sole criterion for deciding whether supplemental imaging is justified because not all women with dense breasts have high interval cancer rates. BCSC 5-year risk combined with BI-RADS breast density can identify women at high risk for interval cancer to inform patient-provider discussions about alternative screening strategies. National Cancer Institute.

Single interval Rényi entropy at low temperature

Science.gov (United States)

Chen, Bin; Wu, Jie-qiang

2014-08-01

In this paper, we calculate the Rényi entropy of one single interval on a circle at finite temperature in 2D CFT. In the low temperature limit, we expand the thermal density matrix level by level in the vacuum Verma module, and calculate the first few leading terms in e -π/ T L explicitly. On the other hand, we compute the same Rényi entropy holographically. After considering the dependence of the Rényi entropy on the temperature, we manage to fix the interval-independent constant terms in the classical part of holographic Rényi entropy. We furthermore extend the analysis in [9] to higher orders and find exact agreement between the results from field theory and bulk computations in the large central charge limit. Our work provides another piece of evidence to support holographic computation of Rényi entropy in AdS3/CFT2 correspondence, even with thermal effect.

A Methodology for Evaluation of Inservice Test Intervals for Pumps and Motor Operated Valves

International Nuclear Information System (INIS)

McElhaney, K.L.

1999-01-01

The nuclear industry has begun efforts to reevaluate inservice tests (ISTs) for key components such as pumps and valves. At issue are two important questions--What kinds of tests provide the most meaningful information about component health, and what periodic test intervals are appropriate? In the past, requirements for component testing were prescribed by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. The tests and test intervals specified in the Code were generic in nature and test intervals were relatively short. Operating experience has shown, however, that performance and safety improvements and cost savings could be realized by tailoring IST programs to similar components with comparable safety importance and service conditions. In many cases, test intervals may be lengthened, resulting in cost savings for utilities and their customers

Haemostatic reference intervals in pregnancy

DEFF Research Database (Denmark)

Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna

2010-01-01

largely unchanged during pregnancy, delivery, and postpartum and were within non-pregnant reference intervals. However, levels of fibrinogen, D-dimer, and coagulation factors VII, VIII, and IX increased markedly. Protein S activity decreased substantially, while free protein S decreased slightly and total......Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...

[Classification and characteristics of interval cancers in the Principality of Asturias's Breast Cancer Screening Program].

Science.gov (United States)

Prieto García, M A; Delgado Sevillano, R; Baldó Sierra, C; González Díaz, E; López Secades, A; Llavona Amor, J A; Vidal Marín, B

2013-09-01

To review and classify the interval cancers found in the Principality of Asturias's Breast Cancer Screening Program (PDPCM). A secondary objective was to determine the histological characteristics, size, and stage of the interval cancers at the time of diagnosis. We included the interval cancers in the PDPCM in the period 2003-2007. Interval cancers were classified according to the breast cancer screening program protocol, with double reading without consensus, without blinding, with arbitration. Mammograms were interpreted by 10 radiologists in the PDPCM. A total of 33.7% of the interval cancers could not be classified; of the interval cancers that could be classified, 40.67% were labeled true interval cancers, 31.4% were labeled false negatives on screening, 23.7% had minimal signs, and 4.23% were considered occult. A total of 70% of the interval cancers were diagnosed in the year of the period between screening examinations and 71.7% were diagnosed after subsequent screening. A total of 76.9% were invasive ductal carcinomas, 61.1% were stage II when detected, and 78.7% were larger than 10mm when detected. The rate of interval cancers and the rate of false negatives in the PDPCM are higher than those recommended in the European guidelines. Interval cancers are diagnosed later than the tumors detected at screening. Studying interval cancers provides significant training for the radiologists in the PDPCM. Copyright © 2011 SERAM. Published by Elsevier Espana. All rights reserved.

Direct Interval Forecasting of Wind Power

DEFF Research Database (Denmark)

Wan, Can; Xu, Zhao; Pinson, Pierre

2013-01-01

This letter proposes a novel approach to directly formulate the prediction intervals of wind power generation based on extreme learning machine and particle swarm optimization, where prediction intervals are generated through direct optimization of both the coverage probability and sharpness...

A note on birth interval distributions

International Nuclear Information System (INIS)

Shrestha, G.

1989-08-01

A considerable amount of work has been done regarding the birth interval analysis in mathematical demography. This paper is prepared with the intention of reviewing some probability models related to interlive birth intervals proposed by different researchers. (author). 14 refs

Myoeletric indices of fatigue adopting different rest intervals during leg press sets.

Science.gov (United States)

Miranda, Humberto; Maia, Marianna; de Oliveira, Carlos G; Farias, Déborah; da Silva, Jurandir B; Lima, Vicente P; Willardson, Jeffrey M; Paz, Gabriel A

2018-01-01

The purpose of this study was to examine the acute effect of different rest intervals between multiple sets of the 45° angled leg press exercise (LP45) on surface electromyographic (SEMG) spectral and amplitude indices of fatigue. Fifteen recreationally trained females performed three protocols in a randomized crossover design; each consisting of four sets of 10 repetitions with 1 (P1), 3 (P3), or 5 (P5) minute rest intervals between sets. Each set was performed with 70% of the LP45 ten-repetition maximum load. The SEMG data for biceps femoris (BF), vastus lateralis (VL), vastus medialis (VM), and rectus femoris (RF) muscles was then evaluated. The SEMG amplitude change in the time coefficient (CRMS) and spectral fatigue index (Cf5) indicated higher levels of fatigue for all muscles evaluated during the P3 protocol versus the P1 and P5 protocols (p ≤ 0.05), respectively. The RF and VL muscles showed greater fatigue levels by the second and third sets; whereas, greater fatigue was shown in the VM and BF muscles by the fourth set (p ≤ 0.05). A three-minute rest interval between sets might represent a neuromuscular window between a fatigue stated and fully recovered state in the context of neural activation. Moreover, a three minute rest interval between sets might allow for consistent recruitment of high threshold motor units over multiple sets, and thus promote a more effective stimulus for strength gains. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electrocardiographic PR-interval duration and cardiovascular risk

DEFF Research Database (Denmark)

Rasmussen, Peter Vibe; Nielsen, Jonas Bille; Skov, Morten Wagner

2017-01-01

Background Because of ambiguous reports in the literature, we aimed to investigate the association between PR interval and the risk of all-cause and cardiovascular death, heart failure, and pacemaker implantation, allowing for a nonlinear relationship. MethodsWe included 293,111 individuals...... into 7 groups based on the population PR interval distribution. Cox models were used, with reference to a PR interval between 152 and 161 ms (40th to heart failure...... adjustment. A long PR interval conferred an increased risk of heart failure ( > 200 ms; HR, 1.31; 95% CI, 1.22-1.42; P 200 ms (HR, 3...

Volatility return intervals analysis of the Japanese market

Science.gov (United States)

Jung, W.-S.; Wang, F. Z.; Havlin, S.; Kaizoji, T.; Moon, H.-T.; Stanley, H. E.

2008-03-01

We investigate scaling and memory effects in return intervals between price volatilities above a certain threshold q for the Japanese stock market using daily and intraday data sets. We find that the distribution of return intervals can be approximated by a scaling function that depends only on the ratio between the return interval τ and its mean . We also find memory effects such that a large (or small) return interval follows a large (or small) interval by investigating the conditional distribution and mean return interval. The results are similar to previous studies of other markets and indicate that similar statistical features appear in different financial markets. We also compare our results between the period before and after the big crash at the end of 1989. We find that scaling and memory effects of the return intervals show similar features although the statistical properties of the returns are different.

A Methodology for Evaluation of Inservice Test Intervals for Pumps and Motor-Operated Valves

International Nuclear Information System (INIS)

Cox, D.F.; Haynes, H.D.; McElhaney, K.L.; Otaduy, P.J.; Staunton, R.H.; Vesely, W.E.

1999-01-01

Recent nuclear industry reevaluation of component inservice testing (IST) requirements is resulting in requests for IST interval extensions and changes to traditional IST programs. To evaluate these requests, long-term component performance and the methods for mitigating degradation need to be understood. Determining the appropriate IST intervals, along with component testing, monitoring, trending, and maintenance effects, has become necessary. This study provides guidelines to support the evaluation of IST intervals for pumps and motor-operated valves (MOVs). It presents specific engineering information pertinent to the performance and monitoring/testing of pumps and MOVs, provides an analytical methodology for assessing the bounding effects of aging on component margin behavior, and identifies basic elements of an overall program to help ensure component operability. Guidance for assessing probabilistic methods and the risk importance and safety consequences of the performance of pumps and MOVs has not been specifically included within the scope of this report, but these elements may be included in licensee change requests

Comparison of the methods for determination of calibration and verification intervals of measuring devices

Directory of Open Access Journals (Sweden)

Toteva Pavlina

2017-01-01

Full Text Available The paper presents different determination and optimisation methods for verification intervals of technical devices for monitoring and measurement based on the requirements of some widely used international standards, e.g. ISO 9001, ISO/IEC 17020, ISO/IEC 17025 etc., maintained by various organizations implementing measuring devices in practice. Comparative analysis of the reviewed methods is conducted in terms of opportunities for assessing the adequacy of interval(s for calibration of measuring devices and their optimisation accepted by an organization – an extension or reduction depending on the obtained results. The advantages and disadvantages of the reviewed methods are discussed, and recommendations for their applicability are provided.

An Adequate First Order Logic of Intervals

DEFF Research Database (Denmark)

Chaochen, Zhou; Hansen, Michael Reichhardt

1998-01-01

This paper introduces left and right neighbourhoods as primitive interval modalities to define other unary and binary modalities of intervals in a first order logic with interval length. A complete first order logic for the neighbourhood modalities is presented. It is demonstrated how the logic can...... support formal specification and verification of liveness and fairness, and also of various notions of real analysis....

An actual load forecasting methodology by interval grey modeling based on the fractional calculus.

Science.gov (United States)

Yang, Yang; Xue, Dingyü

2017-07-17

The operation processes for thermal power plant are measured by the real-time data, and a large number of historical interval data can be obtained from the dataset. Within defined periods of time, the interval information could provide important information for decision making and equipment maintenance. Actual load is one of the most important parameters, and the trends hidden in the historical data will show the overall operation status of the equipments. However, based on the interval grey parameter numbers, the modeling and prediction process is more complicated than the one with real numbers. In order not lose any information, the geometric coordinate features are used by the coordinates of area and middle point lines in this paper, which are proved with the same information as the original interval data. The grey prediction model for interval grey number by the fractional-order accumulation calculus is proposed. Compared with integer-order model, the proposed method could have more freedom with better performance for modeling and prediction, which can be widely used in the modeling process and prediction for the small amount interval historical industry sequence samples. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Increasing accuracy in the interval analysis by the improved format of interval extension based on the first order Taylor series

Science.gov (United States)

Li, Yi; Xu, Yan Long

2018-05-01

When the dependence of the function on uncertain variables is non-monotonic in interval, the interval of function obtained by the classic interval extension based on the first order Taylor series will exhibit significant errors. In order to reduce theses errors, the improved format of the interval extension with the first order Taylor series is developed here considering the monotonicity of function. Two typical mathematic examples are given to illustrate this methodology. The vibration of a beam with lumped masses is studied to demonstrate the usefulness of this method in the practical application, and the necessary input data of which are only the function value at the central point of interval, sensitivity and deviation of function. The results of above examples show that the interval of function from the method developed by this paper is more accurate than the ones obtained by the classic method.

Robust stability analysis of uncertain stochastic neural networks with interval time-varying delay

International Nuclear Information System (INIS)

Feng Wei; Yang, Simon X.; Fu Wei; Wu Haixia

2009-01-01

This paper addresses the stability analysis problem for uncertain stochastic neural networks with interval time-varying delays. The parameter uncertainties are assumed to be norm bounded, and the delay factor is assumed to be time-varying and belong to a given interval, which means that the lower and upper bounds of interval time-varying delays are available. A sufficient condition is derived such that for all admissible uncertainties, the considered neural network is robustly, globally, asymptotically stable in the mean square. Some stability criteria are formulated by means of the feasibility of a linear matrix inequality (LMI), which can be effectively solved by some standard numerical packages. Finally, numerical examples are provided to demonstrate the usefulness of the proposed criteria.

A probabilistic approach for representation of interval uncertainty

International Nuclear Information System (INIS)

Zaman, Kais; Rangavajhala, Sirisha; McDonald, Mark P.; Mahadevan, Sankaran

2011-01-01

In this paper, we propose a probabilistic approach to represent interval data for input variables in reliability and uncertainty analysis problems, using flexible families of continuous Johnson distributions. Such a probabilistic representation of interval data facilitates a unified framework for handling aleatory and epistemic uncertainty. For fitting probability distributions, methods such as moment matching are commonly used in the literature. However, unlike point data where single estimates for the moments of data can be calculated, moments of interval data can only be computed in terms of upper and lower bounds. Finding bounds on the moments of interval data has been generally considered an NP-hard problem because it includes a search among the combinations of multiple values of the variables, including interval endpoints. In this paper, we present efficient algorithms based on continuous optimization to find the bounds on second and higher moments of interval data. With numerical examples, we show that the proposed bounding algorithms are scalable in polynomial time with respect to increasing number of intervals. Using the bounds on moments computed using the proposed approach, we fit a family of Johnson distributions to interval data. Furthermore, using an optimization approach based on percentiles, we find the bounding envelopes of the family of distributions, termed as a Johnson p-box. The idea of bounding envelopes for the family of Johnson distributions is analogous to the notion of empirical p-box in the literature. Several sets of interval data with different numbers of intervals and type of overlap are presented to demonstrate the proposed methods. As against the computationally expensive nested analysis that is typically required in the presence of interval variables, the proposed probabilistic representation enables inexpensive optimization-based strategies to estimate bounds on an output quantity of interest.

Risk factors for QTc interval prolongation

NARCIS (Netherlands)

Heemskerk, Charlotte P.M.; Pereboom, Marieke; van Stralen, Karlijn; Berger, Florine A.; van den Bemt, Patricia M.L.A.; Kuijper, Aaf F.M.; van der Hoeven, Ruud T M; Mantel-Teeuwisse, Aukje K.; Becker, Matthijs L

2018-01-01

Purpose: Prolongation of the QTc interval may result in Torsade de Pointes, a ventricular arrhythmia. Numerous risk factors for QTc interval prolongation have been described, including the use of certain drugs. In clinical practice, there is much debate about the management of the risks involved. In

Development of Innovative Technology to Provide Low-Cost Surface Atmospheric Observations in Data Sparse Regions

Science.gov (United States)

Kucera, Paul; Steinson, Martin

2017-04-01

Accurate and reliable real-time monitoring and dissemination of observations of surface weather conditions is critical for a variety of societal applications. Applications that provide local and regional information about temperature, precipitation, moisture, and winds, for example, are important for agriculture, water resource monitoring, health, and monitoring of hazard weather conditions. In many regions of the World, surface weather stations are sparsely located and/or of poor quality. Existing stations have often been sited incorrectly, not well-maintained, and have limited communications established at the site for real-time monitoring. The University Corporation for Atmospheric Research (UCAR)/National Center for Atmospheric Research (NCAR), with support from USAID, has started an initiative to develop and deploy low-cost weather instrumentation in sparsely observed regions of the world. The project is focused on improving weather observations for environmental monitoring and early warning alert systems on a regional to global scale. Instrumentation that has been developed use innovative new technologies such as 3D printers, Raspberry Pi computing systems, and wireless communications. The goal of the project is to make the weather station designs, software, and processing tools an open community resource. The weather stations can be built locally by agencies, through educational institutions, and residential communities as a citizen effort to augment existing networks to improve detection of natural hazards for disaster risk reduction. The presentation will provide an overview of the open source weather station technology and evaluation of sensor observations for the initial networks that have been deployed in Africa.

A Characterization of 2-Tree Probe Interval Graphs

Directory of Open Access Journals (Sweden)

Brown David E.

2014-08-01

Full Text Available A graph is a probe interval graph if its vertices correspond to some set of intervals of the real line and can be partitioned into sets P and N so that vertices are adjacent if and only if their corresponding intervals intersect and at least one belongs to P. We characterize the 2-trees which are probe interval graphs and extend a list of forbidden induced subgraphs for such graphs created by Pržulj and Corneil in [2-tree probe interval graphs have a large obstruction set, Discrete Appl. Math. 150 (2005 216-231

Magnetic Resonance Fingerprinting with short relaxation intervals.

Science.gov (United States)

Amthor, Thomas; Doneva, Mariya; Koken, Peter; Sommer, Karsten; Meineke, Jakob; Börnert, Peter

2017-09-01

The aim of this study was to investigate a technique for improving the performance of Magnetic Resonance Fingerprinting (MRF) in repetitive sampling schemes, in particular for 3D MRF acquisition, by shortening relaxation intervals between MRF pulse train repetitions. A calculation method for MRF dictionaries adapted to short relaxation intervals and non-relaxed initial spin states is presented, based on the concept of stationary fingerprints. The method is applicable to many different k-space sampling schemes in 2D and 3D. For accuracy analysis, T 1 and T 2 values of a phantom are determined by single-slice Cartesian MRF for different relaxation intervals and are compared with quantitative reference measurements. The relevance of slice profile effects is also investigated in this case. To further illustrate the capabilities of the method, an application to in-vivo spiral 3D MRF measurements is demonstrated. The proposed computation method enables accurate parameter estimation even for the shortest relaxation intervals, as investigated for different sampling patterns in 2D and 3D. In 2D Cartesian measurements, we achieved a scan acceleration of more than a factor of two, while maintaining acceptable accuracy: The largest T 1 values of a sample set deviated from their reference values by 0.3% (longest relaxation interval) and 2.4% (shortest relaxation interval). The largest T 2 values showed systematic deviations of up to 10% for all relaxation intervals, which is discussed. The influence of slice profile effects for multislice acquisition is shown to become increasingly relevant for short relaxation intervals. In 3D spiral measurements, a scan time reduction of 36% was achieved, maintaining the quality of in-vivo T1 and T2 maps. Reducing the relaxation interval between MRF sequence repetitions using stationary fingerprint dictionaries is a feasible method to improve the scan efficiency of MRF sequences. The method enables fast implementations of 3D spatially

Interpregnancy interval and risk of autistic disorder.

Science.gov (United States)

Gunnes, Nina; Surén, Pål; Bresnahan, Michaeline; Hornig, Mady; Lie, Kari Kveim; Lipkin, W Ian; Magnus, Per; Nilsen, Roy Miodini; Reichborn-Kjennerud, Ted; Schjølberg, Synnve; Susser, Ezra Saul; Øyen, Anne-Siri; Stoltenberg, Camilla

2013-11-01

A recent California study reported increased risk of autistic disorder in children conceived within a year after the birth of a sibling. We assessed the association between interpregnancy interval and risk of autistic disorder using nationwide registry data on pairs of singleton full siblings born in Norway. We defined interpregnancy interval as the time from birth of the first-born child to conception of the second-born child in a sibship. The outcome of interest was autistic disorder in the second-born child. Analyses were restricted to sibships in which the second-born child was born in 1990-2004. Odds ratios (ORs) were estimated by fitting ordinary logistic models and logistic generalized additive models. The study sample included 223,476 singleton full-sibling pairs. In sibships with interpregnancy intervals autistic disorder, compared with 0.13% in the reference category (≥ 36 months). For interpregnancy intervals shorter than 9 months, the adjusted OR of autistic disorder in the second-born child was 2.18 (95% confidence interval 1.42-3.26). The risk of autistic disorder in the second-born child was also increased for interpregnancy intervals of 9-11 months in the adjusted analysis (OR = 1.71 [95% CI = 1.07-2.64]). Consistent with a previous report from California, interpregnancy intervals shorter than 1 year were associated with increased risk of autistic disorder in the second-born child. A possible explanation is depletion of micronutrients in mothers with closely spaced pregnancies.

INTERVAL OBSERVER FOR A BIOLOGICAL REACTOR MODEL

Directory of Open Access Journals (Sweden)

T. A. Kharkovskaia

2014-05-01

Full Text Available The method of an interval observer design for nonlinear systems with parametric uncertainties is considered. The interval observer synthesis problem for systems with varying parameters consists in the following. If there is the uncertainty restraint for the state values of the system, limiting the initial conditions of the system and the set of admissible values for the vector of unknown parameters and inputs, the interval existence condition for the estimations of the system state variables, containing the actual state at a given time, needs to be held valid over the whole considered time segment as well. Conditions of the interval observers design for the considered class of systems are shown. They are: limitation of the input and state, the existence of a majorizing function defining the uncertainty vector for the system, Lipschitz continuity or finiteness of this function, the existence of an observer gain with the suitable Lyapunov matrix. The main condition for design of such a device is cooperativity of the interval estimation error dynamics. An individual observer gain matrix selection problem is considered. In order to ensure the property of cooperativity for interval estimation error dynamics, a static transformation of coordinates is proposed. The proposed algorithm is demonstrated by computer modeling of the biological reactor. Possible applications of these interval estimation systems are the spheres of robust control, where the presence of various types of uncertainties in the system dynamics is assumed, biotechnology and environmental systems and processes, mechatronics and robotics, etc.

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

International Nuclear Information System (INIS)

Ismail, R.; Tauviqirrahman, M.; Jamari; Schipper, D. J.

2009-01-01

This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio‐degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser‐print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running‐in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

Science.gov (United States)

Ismail, R.; Tauviqirrahman, M.; Jamari, Jamari; Schipper, D. J.

2009-09-01

This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio-degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser-print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running-in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

Patterns of interval correlations in neural oscillators with adaptation

Directory of Open Access Journals (Sweden)

Tilo eSchwalger

2013-11-01

Full Text Available Neural firing is often subject to negative feedback by adaptationcurrents. These currents can induce strong correlations among the timeintervals between spikes. Here we study analytically the intervalcorrelations of a broad class of noisy neural oscillators withspike-triggered adaptation of arbitrary strength and time scale. Ourweak-noise theory provides a general relation between the correlationsand the phase-response curve (PRC of the oscillator, provesanti-correlations between neighboring intervals for adapting neuronswith type I PRC and identifies a single order parameter thatdetermines the qualitative pattern of correlations. Monotonicallydecaying or oscillating correlation structures can be related toqualitatively different voltage traces after spiking, which can beexplained by the phase plane geometry. At high firing rates, thelong-term variability of the spike train associated with thecumulative interval correlations becomes small, independent of modeldetails. Our results are verified by comparison with stochasticsimulations of the exponential, leaky, and generalizedintegrate-and-fire models with adaptation.

Quantifying Surface Energy Flux Estimation Uncertainty Using Land Surface Temperature Observations

Science.gov (United States)

French, A. N.; Hunsaker, D.; Thorp, K.; Bronson, K. F.

2015-12-01

Remote sensing with thermal infrared is widely recognized as good way to estimate surface heat fluxes, map crop water use, and detect water-stressed vegetation. When combined with net radiation and soil heat flux data, observations of sensible heat fluxes derived from surface temperatures (LST) are indicative of instantaneous evapotranspiration (ET). There are, however, substantial reasons LST data may not provide the best way to estimate of ET. For example, it is well known that observations and models of LST, air temperature, or estimates of transport resistances may be so inaccurate that physically based model nevertheless yield non-meaningful results. Furthermore, using visible and near infrared remote sensing observations collected at the same time as LST often yield physically plausible results because they are constrained by less dynamic surface conditions such as green fractional cover. Although sensitivity studies exist that help identify likely sources of error and uncertainty, ET studies typically do not provide a way to assess the relative importance of modeling ET with and without LST inputs. To better quantify model benefits and degradations due to LST observational inaccuracies, a Bayesian uncertainty study was undertaken using data collected in remote sensing experiments at Maricopa, Arizona. Visible, near infrared and thermal infrared data were obtained from an airborne platform. The prior probability distribution of ET estimates were modeled using fractional cover, local weather data and a Penman-Monteith mode, while the likelihood of LST data was modeled from a two-source energy balance model. Thus the posterior probabilities of ET represented the value added by using LST data. Results from an ET study over cotton grown in 2014 and 2015 showed significantly reduced ET confidence intervals when LST data were incorporated.

Intact interval timing in circadian CLOCK mutants.

Science.gov (United States)

Cordes, Sara; Gallistel, C R

2008-08-28

While progress has been made in determining the molecular basis for the circadian clock, the mechanism by which mammalian brains time intervals measured in seconds to minutes remains a mystery. An obvious question is whether the interval-timing mechanism shares molecular machinery with the circadian timing mechanism. In the current study, we trained circadian CLOCK +/- and -/- mutant male mice in a peak-interval procedure with 10 and 20-s criteria. The mutant mice were more active than their wild-type littermates, but there were no reliable deficits in the accuracy or precision of their timing as compared with wild-type littermates. This suggests that expression of the CLOCK protein is not necessary for normal interval timing.

An efficient solution to the decoherence enhanced trivial crossing problem in surface hopping

Science.gov (United States)

Bai, Xin; Qiu, Jing; Wang, Linjun

2018-03-01

We provide an in-depth investigation of the time interval convergence when both trivial crossing and decoherence corrections are applied to Tully's fewest switches surface hopping (FSSH) algorithm. Using one force-based and one energy-based decoherence strategies as examples, we show decoherence corrections intrinsically enhance the trivial crossing problem. We propose a restricted decoherence (RD) strategy and incorporate it into the self-consistent (SC) fewest switches surface hopping algorithm [L. Wang and O. V. Prezhdo, J. Phys. Chem. Lett. 5, 713 (2014)]. The resulting SC-FSSH-RD approach is applied to general Hamiltonians with different electronic couplings and electron-phonon couplings to mimic charge transport in tens to hundreds of molecules. In all cases, SC-FSSH-RD allows us to use a large time interval of 0.1 fs for convergence and the simulation time is reduced by over one order of magnitude. Both the band and hopping mechanisms of charge transport have been captured perfectly. SC-FSSH-RD makes surface hops in the adiabatic representation and can be implemented in both diabatic and locally diabatic representations for wave function propagation. SC-FSSH-RD can potentially describe general nonadiabatic dynamics of electrons and excitons in organics and other materials.

Computing interval-valued reliability measures: application of optimal control methods

DEFF Research Database (Denmark)

Kozin, Igor; Krymsky, Victor

2017-01-01

The paper describes an approach to deriving interval-valued reliability measures given partial statistical information on the occurrence of failures. We apply methods of optimal control theory, in particular, Pontryagin’s principle of maximum to solve the non-linear optimisation problem and derive...... the probabilistic interval-valued quantities of interest. It is proven that the optimisation problem can be translated into another problem statement that can be solved on the class of piecewise continuous probability density functions (pdfs). This class often consists of piecewise exponential pdfs which appear...... as soon as among the constraints there are bounds on a failure rate of a component under consideration. Finding the number of switching points of the piecewise continuous pdfs and their values becomes the focus of the approach described in the paper. Examples are provided....

A New Approach to Interval-Valued Choquet Integrals and the Problem of Ordering in Interval-Valued Fuzzy Set Applications

Czech Academy of Sciences Publication Activity Database

Bustince, H.; Galar, M.; Bedregal, B.; Kolesárová, A.; Mesiar, Radko

2013-01-01

Roč. 21, č. 6 (2013), s. 1150-1162 ISSN 1063-6706 R&D Projects: GA ČR GAP402/11/0378 Institutional support: RVO:67985556 Keywords : Interval- value d Choquet integral * Shapley value * interval- value d ordered weighted aggregation (OWA) operators * interval- value d decision making Subject RIV: BA - General Mathematics Impact factor: 6.306, year: 2013 http://library.utia.cas.cz/separaty/2013/E/mesiar-0399771.pdf

Fuzzy interval Finite Element/Statistical Energy Analysis for mid-frequency analysis of built-up systems with mixed fuzzy and interval parameters

Science.gov (United States)

Yin, Hui; Yu, Dejie; Yin, Shengwen; Xia, Baizhan

2016-10-01

This paper introduces mixed fuzzy and interval parametric uncertainties into the FE components of the hybrid Finite Element/Statistical Energy Analysis (FE/SEA) model for mid-frequency analysis of built-up systems, thus an uncertain ensemble combining non-parametric with mixed fuzzy and interval parametric uncertainties comes into being. A fuzzy interval Finite Element/Statistical Energy Analysis (FIFE/SEA) framework is proposed to obtain the uncertain responses of built-up systems, which are described as intervals with fuzzy bounds, termed as fuzzy-bounded intervals (FBIs) in this paper. Based on the level-cut technique, a first-order fuzzy interval perturbation FE/SEA (FFIPFE/SEA) and a second-order fuzzy interval perturbation FE/SEA method (SFIPFE/SEA) are developed to handle the mixed parametric uncertainties efficiently. FFIPFE/SEA approximates the response functions by the first-order Taylor series, while SFIPFE/SEA improves the accuracy by considering the second-order items of Taylor series, in which all the mixed second-order items are neglected. To further improve the accuracy, a Chebyshev fuzzy interval method (CFIM) is proposed, in which the Chebyshev polynomials is used to approximate the response functions. The FBIs are eventually reconstructed by assembling the extrema solutions at all cut levels. Numerical results on two built-up systems verify the effectiveness of the proposed methods.

Estimating fluvial wood discharge from timelapse photography with varying sampling intervals

Science.gov (United States)

Anderson, N. K.

2013-12-01

There is recent focus on calculating wood budgets for streams and rivers to help inform management decisions, ecological studies and carbon/nutrient cycling models. Most work has measured in situ wood in temporary storage along stream banks or estimated wood inputs from banks. Little effort has been employed monitoring and quantifying wood in transport during high flows. This paper outlines a procedure for estimating total seasonal wood loads using non-continuous coarse interval sampling and examines differences in estimation between sampling at 1, 5, 10 and 15 minutes. Analysis is performed on wood transport for the Slave River in Northwest Territories, Canada. Relative to the 1 minute dataset, precision decreased by 23%, 46% and 60% for the 5, 10 and 15 minute datasets, respectively. Five and 10 minute sampling intervals provided unbiased equal variance estimates of 1 minute sampling, whereas 15 minute intervals were biased towards underestimation by 6%. Stratifying estimates by day and by discharge increased precision over non-stratification by 4% and 3%, respectively. Not including wood transported during ice break-up, the total minimum wood load estimated at this site is 3300 × 800$ m3 for the 2012 runoff season. The vast majority of the imprecision in total wood volumes came from variance in estimating average volume per log. Comparison of proportions and variance across sample intervals using bootstrap sampling to achieve equal n. Each trial was sampled for n=100, 10,000 times and averaged. All trials were then averaged to obtain an estimate for each sample interval. Dashed lines represent values from the one minute dataset.

VT Mile Points - 1/10-Mile Intervals

Data.gov (United States)

Vermont Center for Geographic Information — The mile points data layer is comprised of discrete locations based on specific measured intervals along a route. These intervals are represented along a...

46 CFR 176.675 - Extension of examination intervals.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Extension of examination intervals. 176.675 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.675 Extension of examination intervals. The intervals between drydock examinations and internal structural examinations...

Surface conductivity of Mercury provides current closure and may affect magnetospheric symmetry

Directory of Open Access Journals (Sweden)

P. Janhunen

2004-04-01

Full Text Available We study what effect a possible surface conductivity of Mercury has on the closure of magnetospheric currents by making six runs with a quasi-neutral hybrid simulation. The runs are otherwise identical but use different synthetic conductivity models: run 1 has a fully conducting planet, run 2 has a poorly conducting planet ( m and runs 3-6 have one of the hemispheres either in the dawn-dusk or day-night directions, conducting well, the other one being conducting poorly. Although the surface conductivity is not known from observations, educated guesses easily give such conductivity values that magnetospheric currents may close partly within the planet, and as the conductivity depends heavily on the mineral composition of the surface, the possibility of significant horizontal variations cannot be easily excluded. The simulation results show that strong horizontal variations may produce modest magnetospheric asymmetries. Beyond the hybrid simulation, we also briefly discuss the possibility that in the nightside there may be a lack of surface electrons to carry downward current, which may act as a further source of surface-related magnetospheric asymmetry.

Key words. Magnetospheric physics (planetary magnetospheres; current systems; solar wind-magnetosphere interactions.6

The prognostic value of the QT interval and QT interval dispersion in all-cause and cardiac mortality and morbidity in a population of Danish citizens.

Science.gov (United States)

Elming, H; Holm, E; Jun, L; Torp-Pedersen, C; Køber, L; Kircshoff, M; Malik, M; Camm, J

1998-09-01

To evaluate the prognostic value of the QT interval and QT interval dispersion in total and in cardiovascular mortality, as well as in cardiac morbidity, in a general population. The QT interval was measured in all leads from a standard 12-lead ECG in a random sample of 1658 women and 1797 men aged 30-60 years. QT interval dispersion was calculated from the maximal difference between QT intervals in any two leads. All cause mortality over 13 years, and cardiovascular mortality as well as cardiac morbidity over 11 years, were the main outcome parameters. Subjects with a prolonged QT interval (430 ms or more) or prolonged QT interval dispersion (80 ms or more) were at higher risk of cardiovascular death and cardiac morbidity than subjects whose QT interval was less than 360 ms, or whose QT interval dispersion was less than 30 ms. Cardiovascular death relative risk ratios, adjusted for age, gender, myocardial infarct, angina pectoris, diabetes mellitus, arterial hypertension, smoking habits, serum cholesterol level, and heart rate were 2.9 for the QT interval (95% confidence interval 1.1-7.8) and 4.4 for QT interval dispersion (95% confidence interval 1.0-19-1). Fatal and non-fatal cardiac morbidity relative risk ratios were similar, at 2.7 (95% confidence interval 1.4-5.5) for the QT interval and 2.2 (95% confidence interval 1.1-4.0) for QT interval dispersion. Prolongation of the QT interval and QT interval dispersion independently affected the prognosis of cardiovascular mortality and cardiac fatal and non-fatal morbidity in a general population over 11 years.

Inverse Interval Matrix: A Survey

Czech Academy of Sciences Publication Activity Database

Rohn, Jiří; Farhadsefat, R.

2011-01-01

Roč. 22, - (2011), s. 704-719 E-ISSN 1081-3810 R&D Projects: GA ČR GA201/09/1957; GA ČR GC201/08/J020 Institutional research plan: CEZ:AV0Z10300504 Keywords : interval matrix * inverse interval matrix * NP-hardness * enclosure * unit midpoint * inverse sign stability * nonnegative invertibility * absolute value equation * algorithm Subject RIV: BA - General Mathematics Impact factor: 0.808, year: 2010 http://www.math.technion.ac.il/iic/ ela / ela -articles/articles/vol22_pp704-719.pdf

INTRINSIC TOPOLOGY AND REFINEMENT OF HUTTON UNIT INTERVAL

Institute of Scientific and Technical Information of China (English)

王国俊; 徐罗山

1992-01-01

This paper introduces the theory of continuous lattices to the study of the Hutton unit interval I(L). some theorems related to I(L) are pithily proved. A kind of intrinsic topologies is applied to refining the topology of I(L),and a new fuzzy unit interval,called the H(λ) unit interval,is defined.Based on the H(λ) unit interval the H(λ)-complete regularity is introduced.Also,the theory of. H(λ)-stone-ech compactifications is established

Extraction and LOD control of colored interval volumes

Science.gov (United States)

Miyamura, Hiroko N.; Takeshima, Yuriko; Fujishiro, Issei; Saito, Takafumi

2005-03-01

Interval volume serves as a generalized isosurface and represents a three-dimensional subvolume for which the associated scalar filed values lie within a user-specified closed interval. In general, it is not an easy task for novices to specify the scalar field interval corresponding to their ROIs. In order to extract interval volumes from which desirable geometric features can be mined effectively, we propose a suggestive technique which extracts interval volumes automatically based on the global examination of the field contrast structure. Also proposed here is a simplification scheme for decimating resultant triangle patches to realize efficient transmission and rendition of large-scale interval volumes. Color distributions as well as geometric features are taken into account to select best edges to be collapsed. In addition, when a user wants to selectively display and analyze the original dataset, the simplified dataset is restructured to the original quality. Several simulated and acquired datasets are used to demonstrate the effectiveness of the present methods.

Advanced measurement and analysis of surface textures produced by micro-machining processes

International Nuclear Information System (INIS)

Bordatchev, Evgueni V; Hafiz, Abdullah M K

2014-01-01

Surface texture of a part or a product has significant effects on its functionality, physical-mechanical properties and visual appearance. In particular for miniature products, the implication of surface quality becomes critical owing to the presence of geometrical features with micro/nano-scale dimensions. Qualitative and quantitative assessments of surface texture are carried out predominantly by profile parameters, which are often insufficient to address the contribution of constituent spatial components with varied amplitudes and wavelengths. In this context, this article presents a novel approach for advanced measurement and analysis of profile average roughness (R a ) and its spatial distribution at different wavelength intervals. The applicability of the proposed approach was verified for three different surface topographies prepared by grinding, laser micro-polishing and micro-milling processes. From the measurement and analysis results, R a (λ) spatial distribution was found to be an effective measure of revealing the contributions of various spatial components within specific wavelength intervals towards formation of the entire surface profile. In addition, the approach was extended to the measurement and analysis of areal average roughness S a (λ) spatial distribution within different wavelength intervals. Besides, the proposed method was demonstrated to be a useful technique in developing a functional correlation between a manufacturing process and its corresponding surface profile. (paper)

Investigations of timing during the schedule and reinforcement intervals with wheel-running reinforcement.

Science.gov (United States)

Belke, Terry W; Christie-Fougere, Melissa M

2006-11-01

Across two experiments, a peak procedure was used to assess the timing of the onset and offset of an opportunity to run as a reinforcer. The first experiment investigated the effect of reinforcer duration on temporal discrimination of the onset of the reinforcement interval. Three male Wistar rats were exposed to fixed-interval (FI) 30-s schedules of wheel-running reinforcement and the duration of the opportunity to run was varied across values of 15, 30, and 60s. Each session consisted of 50 reinforcers and 10 probe trials. Results showed that as reinforcer duration increased, the percentage of postreinforcement pauses longer than the 30-s schedule interval increased. On probe trials, peak response rates occurred near the time of reinforcer delivery and peak times varied with reinforcer duration. In a second experiment, seven female Long-Evans rats were exposed to FI 30-s schedules leading to 30-s opportunities to run. Timing of the onset and offset of the reinforcement period was assessed by probe trials during the schedule interval and during the reinforcement interval in separate conditions. The results provided evidence of timing of the onset, but not the offset of the wheel-running reinforcement period. Further research is required to assess if timing occurs during a wheel-running reinforcement period.

Reference Intervals for Non-Fasting CVD Lipids and Inflammation Markers in Pregnant Indigenous Australian Women.

Science.gov (United States)

Schumacher, Tracy L; Oldmeadow, Christopher; Clausen, Don; Weatherall, Loretta; Keogh, Lyniece; Pringle, Kirsty G; Rae, Kym M

2017-10-14

Indigenous Australians experience high rates of cardiovascular disease (CVD). The origins of CVD may commence during pregnancy, yet few serum reference values for CVD biomarkers exist specific to the pregnancy period. The Gomeroi gaaynggal research project is a program that undertakes research and provides some health services to pregnant Indigenous women. Three hundred and ninety-nine non-fasting samples provided by the study participants (206 pregnancies and 175 women) have been used to construct reference intervals for CVD biomarkers during this critical time. A pragmatic design was used, in that women were not excluded for the presence of chronic or acute health states. Percentile bands for non-linear relationships were constructed according to the methods of Wright and Royston (2008), using the xriml package in StataIC 13.1. Serum cholesterol, triglycerides, cystatin-C and alkaline phosphatase increased as gestational age progressed, with little change seen in high-sensitivity C-Reactive Protein and γ glutamyl transferase. Values provided in the reference intervals are consistent with findings from other research projects. These reference intervals will form a basis with which future CVD biomarkers for pregnant Indigenous Australian women can be compared.

Point and interval forecasts of mortality rates and life expectancy: A comparison of ten principal component methods

Directory of Open Access Journals (Sweden)

Han Lin Shang

2011-07-01

Full Text Available Using the age- and sex-specific data of 14 developed countries, we compare the point and interval forecast accuracy and bias of ten principal component methods for forecasting mortality rates and life expectancy. The ten methods are variants and extensions of the Lee-Carter method. Based on one-step forecast errors, the weighted Hyndman-Ullah method provides the most accurate point forecasts of mortality rates and the Lee-Miller method is the least biased. For the accuracy and bias of life expectancy, the weighted Hyndman-Ullah method performs the best for female mortality and the Lee-Miller method for male mortality. While all methods underestimate variability in mortality rates, the more complex Hyndman-Ullah methods are more accurate than the simpler methods. The weighted Hyndman-Ullah method provides the most accurate interval forecasts for mortality rates, while the robust Hyndman-Ullah method provides the best interval forecast accuracy for life expectancy.

Independent Analysis of the Flagellum Surface and Matrix Proteomes Provides Insight into Flagellum Signaling in Mammalian-infectious Trypanosoma brucei*

Science.gov (United States)

Oberholzer, Michael; Langousis, Gerasimos; Nguyen, HoangKim T.; Saada, Edwin A.; Shimogawa, Michelle M.; Jonsson, Zophonias O.; Nguyen, Steven M.; Wohlschlegel, James A.; Hill, Kent L.

2011-01-01

The flagellum of African trypanosomes is an essential and multifunctional organelle that functions in motility, cell morphogenesis, and host-parasite interaction. Previous studies of the trypanosome flagellum have been limited by the inability to purify flagella without first removing the flagellar membrane. This limitation is particularly relevant in the context of studying flagellum signaling, as signaling requires surface-exposed proteins in the flagellar membrane and soluble signaling proteins in the flagellar matrix. Here we employ a combination of genetic and mechanical approaches to purify intact flagella from the African trypanosome, Trypanosoma brucei, in its mammalian-infectious stage. We combined flagellum purification with affinity-purification of surface-exposed proteins to conduct independent proteomic analyses of the flagellum surface and matrix fractions. The proteins identified encompass a broad range of molecular functionalities, including many predicted to function in signaling. Immunofluorescence and RNA interference studies demonstrate flagellum localization and function for proteins identified and provide insight into mechanisms of flagellum attachment and motility. The flagellum surface proteome includes many T. brucei-specific proteins and is enriched for proteins up-regulated in the mammalian-infectious stage of the parasite life-cycle. The combined results indicate that the flagellum surface presents a diverse and dynamic host-parasite interface that is well-suited for host-parasite signaling. PMID:21685506

Changes in contact angle providing evidence for surface alteration in multi-component solid foods

International Nuclear Information System (INIS)

Reinke, Svenja K; Hauf, Katharina; Heinrich, Stefan; Vieira, Josélio; Palzer, Stefan

2015-01-01

Chocolate blooming, one of the major problems in the confectionery industry, is the formation of visible white spots or a greyish haze on the surface of chocolate products due to large sugar or fat crystals on the surface. This leads to aesthetic changes and deterioration of taste and thus large sales losses for the confectionery industry due to consumer complaints. Chocolate blooming is often related to migration of lipids or sugar molecules to the chocolate surface, where they recrystallize with an associated polymorphic change of crystal structure on the surface. The wetting behaviour from contact angle measurements gives further insight into surface properties and is needed to determine surface energies and to evaluate possible migration mechanisms and preferred pathways. Therefore, an equilibrium contact angle is needed which is not directly accessible and is influenced by surface texture and interaction between solid and test liquid. In this study, the surface of cocoa butter and conventional chocolates was characterized by measuring the contact angle with the sessile drop protocol. The influence of roughness, test liquid and pre-crystallization of the samples as well as the storage temperature were investigated. In case of no pre-crystallization, a change in surface properties due to storage at 20 °C was detected, whereas samples stored at 30 °C showed the same wetting behaviour as fresh samples. This is associated with polymorphic transformation from thermodynamically less stable crystals to more stable configurations. (paper)

Changes in contact angle providing evidence for surface alteration in multi-component solid foods

Science.gov (United States)

Reinke, Svenja K.; Hauf, Katharina; Vieira, Josélio; Heinrich, Stefan; Palzer, Stefan

2015-11-01

Chocolate blooming, one of the major problems in the confectionery industry, is the formation of visible white spots or a greyish haze on the surface of chocolate products due to large sugar or fat crystals on the surface. This leads to aesthetic changes and deterioration of taste and thus large sales losses for the confectionery industry due to consumer complaints. Chocolate blooming is often related to migration of lipids or sugar molecules to the chocolate surface, where they recrystallize with an associated polymorphic change of crystal structure on the surface. The wetting behaviour from contact angle measurements gives further insight into surface properties and is needed to determine surface energies and to evaluate possible migration mechanisms and preferred pathways. Therefore, an equilibrium contact angle is needed which is not directly accessible and is influenced by surface texture and interaction between solid and test liquid. In this study, the surface of cocoa butter and conventional chocolates was characterized by measuring the contact angle with the sessile drop protocol. The influence of roughness, test liquid and pre-crystallization of the samples as well as the storage temperature were investigated. In case of no pre-crystallization, a change in surface properties due to storage at 20 °C was detected, whereas samples stored at 30 °C showed the same wetting behaviour as fresh samples. This is associated with polymorphic transformation from thermodynamically less stable crystals to more stable configurations.

[Reflection of estimating postmortem interval in forensic entomology and the Daubert standard].

Science.gov (United States)

Xie, Dan; Peng, Yu-Long; Guo, Ya-Dong; Cai, Ji-Feng

2013-08-01

Estimating postmortem interval (PMI) is always the emphasis and difficulty in forensic practice. Forensic entomology plays a significant indispensable role. Recently, the theories and technologies of forensic entomology are increasingly rich. But many problems remain in the research and practice. With proposing the Daubert standard, the reliability and accuracy of estimation PMI by forensic entomology need more demands. This review summarizes the application of the Daubert standard in several aspects of ecology, quantitative genetics, population genetics, molecular biology, and microbiology in the practice of forensic entomology. It builds a bridge for basic research and forensic practice to provide higher accuracy for estimating postmortem interval by forensic entomology.

INTERVAL-VALUED INTUITIONISTIC FUZZY BI-IDEALS IN TERNARY SEMIRINGS

Directory of Open Access Journals (Sweden)

D. KRISHNASWAMY

2016-04-01

Full Text Available In this paper we introduce the notions of interval-valued fuzzy bi-ideal, interval-valued anti fuzzy bi-ideal and interval-valued intuitionistic fuzzy bi-ideal in ternary semirings and some of the basic properties of these ideals are investigated. We also introduce normal interval-valued intuitionistic fuzzy ideals in ternary semirings.

Sex Hormones and the QT Interval: A Review

Science.gov (United States)

Sedlak, Tara; Shufelt, Chrisandra; Iribarren, Carlos

2012-01-01

Abstract A prolonged QT interval is a marker for an increased risk of ventricular tachyarrhythmias. Both endogenous and exogenous sex hormones have been shown to affect the QT interval. Endogenous testosterone and progesterone shorten the action potential, and estrogen lengthens the QT interval. During a single menstrual cycle, progesterone levels, but not estrogen levels, have the dominant effect on ventricular repolarization in women. Studies of menopausal hormone therapy (MHT) in the form of estrogen-alone therapy (ET) and estrogen plus progesterone therapy (EPT) have suggested a counterbalancing effect of exogenous estrogen and progesterone on the QT. Specifically, ET lengthens the QT, whereas EPT has no effect. To date, there are no studies on oral contraception (OC) and the QT interval, and future research is needed. This review outlines the current literature on sex hormones and QT interval, including the endogenous effects of estrogen, progesterone, and testosterone and the exogenous effects of estrogen and progesterone therapy in the forms of MHT and hormone contraception. Further, we review the potential mechanisms and pathophysiology of sex hormones on the QT interval. PMID:22663191

Effects of prescribed fire intervals on carbon and nitrogen in forest soils of the Mogollon Rim, Arizona

Science.gov (United States)

Daniel G. Neary; Steven T. Overby; Sally M. Haase

2003-01-01

The pre-European settlement ponderosa pine forests of the Mogollon Rim consisted of open stands of uneven-aged trees with a significant grass-forb understory. Light surface-fires occurred on an average interval of 2 to 12 years in Arizona and New Mexico (Dietrich 1980). These fires consumed forest floor material, burned most of the young regeneration, and promoted...

Socioeconomic position and the primary care interval

DEFF Research Database (Denmark)

Vedsted, Anders

2018-01-01

to the easiness to interpret the symptoms of the underlying cancer. Methods. We conducted a population-based cohort study using survey data on time intervals linked at an individually level to routine collected data on demographics from Danish registries. Using logistic regression we estimated the odds......Introduction. Diagnostic delays affect cancer survival negatively. Thus, the time interval from symptomatic presentation to a GP until referral to secondary care (i.e. primary care interval (PCI)), should be as short as possible. Lower socioeconomic position seems associated with poorer cancer...... younger than 45 years of age and older than 54 years of age had longer primary care interval than patients aged ‘45-54’ years. No other associations for SEP characteristics were observed. The findings may imply that GPs are referring patients regardless of SEP, although some room for improvement prevails...

Modelling the failure risk for water supply networks with interval-censored data

International Nuclear Information System (INIS)

García-Mora, B.; Debón, A.; Santamaría, C.; Carrión, A.

2015-01-01

In reliability, sometimes some failures are not observed at the exact moment of the occurrence. In that case it can be more convenient to approximate them by a time interval. In this study, we have used a generalized non-linear model developed for interval-censored data to treat the life time of a pipe from its time of installation until its failure. The aim of this analysis was to identify those network characteristics that may affect the risk of failure and we make an exhaustive validation of this analysis. The results indicated that certain characteristics of the network negatively affected the risk of failure of the pipe: an increase in the length and pressure of the pipes, a small diameter, some materials used in the manufacture of pipes and the traffic on the street where the pipes are located. Once the model has been correctly fitted to our data, we also provided simple tables that will allow companies to easily calculate the pipe's probability of failure in a future. - Highlights: • We model the first failure time in a water supply company from Spain. • We fit arbitrarily interval-censored data with a generalized non-linear model. • The results are validated. We provide simple tables to easily calculate probabilities of no failure at different times.

Generalized production planning problem under interval uncertainty

Directory of Open Access Journals (Sweden)

Samir A. Abass

2010-06-01

Full Text Available Data in many real life engineering and economical problems suffer from inexactness. Herein we assume that we are given some intervals in which the data can simultaneously and independently perturb. We consider the generalized production planning problem with interval data. The interval data are in both of the objective function and constraints. The existing results concerning the qualitative and quantitative analysis of basic notions in parametric production planning problem. These notions are the set of feasible parameters, the solvability set and the stability set of the first kind.

Reconstruction of dynamical systems from interspike intervals

International Nuclear Information System (INIS)

Sauer, T.

1994-01-01

Attractor reconstruction from interspike interval (ISI) data is described, in rough analogy with Taken's theorem for attractor reconstruction from time series. Assuming a generic integrate-and-fire model coupling the dynamical system to the spike train, there is a one-to-one correspondence between the system states and interspike interval vectors of sufficiently large dimension. The correspondence has an important implication: interspike intervals can be forecast from past history. We show that deterministically driven ISI series can be distinguished from stochastically driven ISI series on the basis of prediction error

MODIFIED PATH METHODOLOGY FOR OBTAINING INTERVAL-SCALED POSTURAL ASSESSMENTS OF FARMWORKERS.

Science.gov (United States)

Garrison, Emma B; Dropkin, Jonathan; Russell, Rebecca; Jenkins, Paul

2018-01-29

Agricultural workers perform tasks that frequently require awkward and extreme postures that are associated with musculoskeletal disorders (MSDs). The PATH (Posture, Activity, Tools, Handling) system currently provides a sound methodology for quantifying workers' exposure to these awkward postures on an ordinal scale of measurement, which places restrictions on the choice of analytic methods. This study reports a modification of the PATH methodology that instead captures these postures as degrees of flexion, an interval-scaled measurement. Rather than making live observations in the field, as in PATH, the postural assessments were performed on photographs using ImageJ photo analysis software. Capturing the postures in photographs permitted more careful measurement of the degrees of flexion. The current PATH methodology requires that the observer in the field be trained in the use of PATH, whereas the single photographer used in this modification requires only sufficient training to maintain the proper camera angle. Ultimately, these interval-scale measurements could be combined with other quantitative measures, such as those produced by electromyograms (EMGs), to provide more sophisticated estimates of future risk for MSDs. Further, these data can provide a baseline from which the effects of interventions designed to reduce hazardous postures can be calculated with greater precision. Copyright© by the American Society of Agricultural Engineers.

Removal of arsenate by ferrihydrite via surface complexation and surface precipitation

Energy Technology Data Exchange (ETDEWEB)

Jiang, Xiuli [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Peng, Changjun; Fu, Dun; Chen, Zheng [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Shen, Liang [Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Li, Qingbiao [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Ouyang, Tong, E-mail: yz3t@xmu.edu.cn [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Wang, Yuanpeng, E-mail: wypp@xmu.edu.cn [Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China)

2015-10-30

Graphical abstract: - Highlights: • Surface complexation and surface precipitation of As on ferrihydrite happen at pH 3–6. • The formation of surface precipitation enhanced As(V) adsorption. • The dissolved Fe{sup 3+} had a good linear relationship with the amount of arsenate re-adsorption. - Abstract: In this study, macroscopic and spectroscopic experimental methods accurately modeled the sorption process of arsenate on ferrihydrite. EXAFS, X-ray diffraction and infrared (IR) spectroscopy indicated that the behavior of As(V) adsorption onto ferrihydrite took place mainly via surface complexation and surface precipitation at acidic pH (3.0–6.0), while the surface precipitation was dominated at longer time intervals and higher Fe{sup 3+} concentration. The macroscopic competitive adsorption experiment between arsenate with phosphate indicated two types of adsorption sites existing on the surface of ferrihydrite, i.e., non-exchangeable sites, which are responsible for a rapid surface complex formation; and exchangeable sites for a slow build-up of surface precipitates. In the slow build-up precipitates, the As(V) surface coverage (mmol/g) exhibited a good linear relationship (R{sup 2} = 0.952) with the amount of dissolved Fe{sup 3+}. Three steps are involved during the process of surface precipitation, i.e., (1) an initial uptake of As(V) via surface complexation; (2) re-adsorption of Fe{sup 3+} leaching from ferrihydrite on the surface complex; and (3) As(V) adsorption via surface complexation again and finally forming the surface precipitate.

Sonographic Characteristics and Interval Changes of Subacute Thyroiditis.

Science.gov (United States)

Lee, Yoo Jin; Kim, Dong Wook

2016-08-01

This study aimed to assess the sonographic characteristics and interval changes of subacute thyroiditis using follow-up sonography. From January 2008 to December 2014, 85 patients with clinically suspected subacute thyroiditis underwent sonographic examinations by a single radiologist. Subacute thyroiditis was confirmed on the basis of the clinical, sonographic, and cytohistopathologic findings. On the initial and follow-up sonograms, the individual sonographic findings and interval changes were retrospectively investigated by the same radiologist. According to the sonographic configuration, subacute thyroiditis lesions were categorized as nodular or non-nodular. The interval changes in the lesions were classified as follows: "disappeared," "decreased," "increased," "eventually smaller," "eventually larger," or "no interval change." Subacute thyroiditis was confirmed in 64 of the 85 patients. In these 64 patients, nodular (n = 39) and non-nodular (n = 35) lesions were found; 10 patients had both nodular and non-nodular lesions. Of the 64 patients, 41 underwent sonographic follow-up. In both nodular and non-nodular lesions, the common interval changes included disappeared, decreased, and eventually smaller patterns. Although the increased pattern was found only in 4 nodular lesions, there was no significant difference in the interval changes between nodular and non-nodular lesions. On follow-up sonography, a new lesion was detected in 6 patients. The prevalence rate of nodular subacute thyroiditis lesions on sonography was high, and the interval changes in the lesions were variable.

Tuning for temporal interval in human apparent motion detection.

Science.gov (United States)

Bours, Roger J E; Stuur, Sanne; Lankheet, Martin J M

2007-01-08

Detection of apparent motion in random dot patterns requires correlation across time and space. It has been difficult to study the temporal requirements for the correlation step because motion detection also depends on temporal filtering preceding correlation and on integration at the next levels. To specifically study tuning for temporal interval in the correlation step, we performed an experiment in which prefiltering and postintegration were held constant and in which we used a motion stimulus containing coherent motion for a single interval value only. The stimulus consisted of a sparse random dot pattern in which each dot was presented in two frames only, separated by a specified interval. On each frame, half of the dots were refreshed and the other half was a displaced reincarnation of the pattern generated one or several frames earlier. Motion energy statistics in such a stimulus do not vary from frame to frame, and the directional bias in spatiotemporal correlations is similar for different interval settings. We measured coherence thresholds for left-right direction discrimination by varying motion coherence levels in a Quest staircase procedure, as a function of both step size and interval. Results show that highest sensitivity was found for an interval of 17-42 ms, irrespective of viewing distance. The falloff at longer intervals was much sharper than previously described. Tuning for temporal interval was largely, but not completely, independent of step size. The optimal temporal interval slightly decreased with increasing step size. Similarly, the optimal step size decreased with increasing temporal interval.

Multi-Response Parameter Interval Sensitivity and Optimization for the Composite Tape Winding Process

Science.gov (United States)

Yu, Tao; Kang, Chao; Zhao, Pan

2018-01-01

The composite tape winding process, which utilizes a tape winding machine and prepreg tapes, provides a promising way to improve the quality of composite products. Nevertheless, the process parameters of composite tape winding have crucial effects on the tensile strength and void content, which are closely related to the performances of the winding products. In this article, two different object values of winding products, including mechanical performance (tensile strength) and a physical property (void content), were respectively calculated. Thereafter, the paper presents an integrated methodology by combining multi-parameter relative sensitivity analysis and single-parameter sensitivity analysis to obtain the optimal intervals of the composite tape winding process. First, the global multi-parameter sensitivity analysis method was applied to investigate the sensitivity of each parameter in the tape winding processing. Then, the local single-parameter sensitivity analysis method was employed to calculate the sensitivity of a single parameter within the corresponding range. Finally, the stability and instability ranges of each parameter were distinguished. Meanwhile, the authors optimized the process parameter ranges and provided comprehensive optimized intervals of the winding parameters. The verification test validated that the optimized intervals of the process parameters were reliable and stable for winding products manufacturing. PMID:29385048

Comparing interval estimates for small sample ordinal CFA models.

Science.gov (United States)

Natesan, Prathiba

2015-01-01

Robust maximum likelihood (RML) and asymptotically generalized least squares (AGLS) methods have been recommended for fitting ordinal structural equation models. Studies show that some of these methods underestimate standard errors. However, these studies have not investigated the coverage and bias of interval estimates. An estimate with a reasonable standard error could still be severely biased. This can only be known by systematically investigating the interval estimates. The present study compares Bayesian, RML, and AGLS interval estimates of factor correlations in ordinal confirmatory factor analysis models (CFA) for small sample data. Six sample sizes, 3 factor correlations, and 2 factor score distributions (multivariate normal and multivariate mildly skewed) were studied. Two Bayesian prior specifications, informative and relatively less informative were studied. Undercoverage of confidence intervals and underestimation of standard errors was common in non-Bayesian methods. Underestimated standard errors may lead to inflated Type-I error rates. Non-Bayesian intervals were more positive biased than negatively biased, that is, most intervals that did not contain the true value were greater than the true value. Some non-Bayesian methods had non-converging and inadmissible solutions for small samples and non-normal data. Bayesian empirical standard error estimates for informative and relatively less informative priors were closer to the average standard errors of the estimates. The coverage of Bayesian credibility intervals was closer to what was expected with overcoverage in a few cases. Although some Bayesian credibility intervals were wider, they reflected the nature of statistical uncertainty that comes with the data (e.g., small sample). Bayesian point estimates were also more accurate than non-Bayesian estimates. The results illustrate the importance of analyzing coverage and bias of interval estimates, and how ignoring interval estimates can be misleading

Spectral emissivity of surface blackbody calibrators

DEFF Research Database (Denmark)

Clausen, Sønnik

2007-01-01

The normal spectral emissivity of commercial infrared calibrators is compared with measurements of anodized aluminum samples and grooved aluminum surfaces coated with Pyromark. Measurements performed by FTIR spectroscopy in the wavelength interval from 2 to 20 mu m and at temperatures between 5...

High-intensity interval training (HIIT) for patients with chronic diseases

OpenAIRE

Ross, Leanna M.; Porter, Ryan R.; Durstine, J. Larry

2016-01-01

Exercise training provides physiological benefits for both improving athletic performance and maintaining good health. Different exercise training modalities and strategies exist. Two common exercise strategies are high-intensity interval training (HIIT) and moderate-intensity continuous exercise training (MCT). HIIT was first used early in the 20th century and popularized later that century for improving performance of Olympic athletes. The primary premise underlying HIIT is that, compared t...

Clinical and Biological Features of Interval Colorectal Cancer

Directory of Open Access Journals (Sweden)

Yu Mi Lee

2017-05-01

Full Text Available Interval colorectal cancer (I-CRC is defined as a CRC diagnosed within 60 months after a negative colonoscopy, taking into account that 5 years is the “mean sojourn time.” It is important to prevent the development of interval cancer. The development of interval colon cancer is associated with female sex, old age, family history of CRC, comorbidities, diverticulosis, and the skill of the endoscopist. During carcinogenesis, sessile serrated adenomas/polyps (SSA/Ps share many genomic and colonic site characteristics with I-CRCs. The clinical and biological features of I-CRC should be elucidated to prevent the development of interval colon cancer.

Establishment of 25-OH-vitamin D reference interval by radioimmunoassay and its clinical significance

International Nuclear Information System (INIS)

Chen Jianbo; Huang Xianzhong; Hu Chaohui; Zu Yuli; Zhu Qingyi

2009-01-01

Objective: To establish reference interval of 25-OH-vitamin D (25-OH-Vit D) by radioimmunoassay and provide suggestion for clinical applications. Method: Collecting 204 healthy persons specimens, and validating and establishing reference interval of 25-OH-Vit D by treatment of outlying observations, judgement of data distributions and analysis of test results. Results: The reference interval of 25-OH-Vit D established in our laboratory is 16.0-39.7 ng/ml for adolescents and 11.7-40.0 ng/ml for adults. Conclusions: The levels of 25-OH-Vit D in humans depend on their age, sex and life style. Some people's vitamin D intake is not enough. Doctors should pay attention to the sufficient 25-OH-Vit D needed when evaluate vitamin D intake. (authors)

Two-dimensional model of laser alloying of binary alloy powder with interval of melting temperature

Science.gov (United States)

Knyzeva, A. G.; Sharkeev, Yu. P.

2017-10-01

The paper contains two-dimensional model of laser beam melting of powders from binary alloy. The model takes into consideration the melting of alloy in some temperature interval between solidus and liquidus temperatures. The external source corresponds to laser beam with energy density distributed by Gauss law. The source moves along the treated surface according to given trajectory. The model allows investigating the temperature distribution and thickness of powder layer depending on technological parameters.

New precession expressions, valid for long time intervals

Science.gov (United States)

Vondrák, J.; Capitaine, N.; Wallace, P.

2011-10-01

Context. The present IAU model of precession, like its predecessors, is given as a set of polynomial approximations of various precession parameters intended for high-accuracy applications over a limited time span. Earlier comparisons with numerical integrations have shown that this model is valid only for a few centuries around the basic epoch, J2000.0, while for more distant epochs it rapidly diverges from the numerical solution. In our preceding studies we also obtained preliminary developments for the precessional contribution to the motion of the equator: coordinates X,Y of the precessing pole and precession parameters ψA,ωA, suitable for use over long time intervals. Aims: The goal of the present paper is to obtain upgraded developments for various sets of precession angles that would fit modern observations near J2000.0 and at the same time fit numerical integration of the motions of solar system bodies on scales of several thousand centuries. Methods: We used the IAU 2006 solutions to represent the precession of the ecliptic and of the equator close to J2000.0 and, for more distant epochs, a numerical integration using the Mercury 6 package and solutions by Laskar et al. (1993, A&A, 270, 522) with upgraded initial conditions and constants to represent the ecliptic, and general precession and obliquity, respectively. From them, different precession parameters were calculated in the interval ± 200 millennia from J2000.0, and analytical expressions are found that provide a good fit for the whole interval. Results: Series for the various precessional parameters, comprising a cubic polynomial plus from 8 to 14 periodic terms, are derived that allow precession to be computed with an accuracy comparable to IAU 2006 around the central epoch J2000.0, a few arcseconds throughout the historical period, and a few tenths of a degree at the ends of the ± 200 millennia time span. Computer algorithms are provided that compute the ecliptic and mean equator poles and the

Transmission line sag calculations using interval mathematics

Energy Technology Data Exchange (ETDEWEB)

Shaalan, H. [Institute of Electrical and Electronics Engineers, Washington, DC (United States)]|[US Merchant Marine Academy, Kings Point, NY (United States)

2007-07-01

Electric utilities are facing the need for additional generating capacity, new transmission systems and more efficient use of existing resources. As such, there are several uncertainties associated with utility decisions. These uncertainties include future load growth, construction times and costs, and performance of new resources. Regulatory and economic environments also present uncertainties. Uncertainty can be modeled based on a probabilistic approach where probability distributions for all of the uncertainties are assumed. Another approach to modeling uncertainty is referred to as unknown but bounded. In this approach, the upper and lower bounds on the uncertainties are assumed without probability distributions. Interval mathematics is a tool for the practical use and extension of the unknown but bounded concept. In this study, the calculation of transmission line sag was used as an example to demonstrate the use of interval mathematics. The objective was to determine the change in cable length, based on a fixed span and an interval of cable sag values for a range of temperatures. The resulting change in cable length was an interval corresponding to the interval of cable sag values. It was shown that there is a small change in conductor length due to variation in sag based on the temperature ranges used in this study. 8 refs.

One-sided interval edge-colorings of bipartite graphs

DEFF Research Database (Denmark)

Casselgren, Carl Johan; Toft, Bjarne

2016-01-01

Let G be a bipartite graph with parts X and Y . An X-interval coloring of G is a proper edge coloring of G by integers such that the colors on the edges incident to any vertex in X form an interval. Denote by χ′int(G,X) the minimum k such that G has an X-interval coloring with k colors. In this p...

Comparing Interval Management Control Laws for Steady-State Errors and String Stability

Science.gov (United States)

Weitz, Lesley A.; Swieringa, Kurt A.

2018-01-01

Interval Management (IM) is a future airborne spacing concept that leverages avionics to provide speed guidance to an aircraft to achieve and maintain a specified spacing interval from another aircraft. The design of a speed control law to achieve the spacing goal is a key aspect in the research and development of the IM concept. In this paper, two control laws that are used in much of the contemporary IM research are analyzed and compared to characterize steady-state errors and string stability. Numerical results are used to illustrate how the choice of control laws gains impacts the size of steady-state errors and string performance and the potential trade-offs between those performance characteristics.

Existence test for asynchronous interval iterations

DEFF Research Database (Denmark)

Madsen, Kaj; Caprani, O.; Stauning, Ole

1997-01-01

In the search for regions that contain fixed points ofa real function of several variables, tests based on interval calculationscan be used to establish existence ornon-existence of fixed points in regions that are examined in the course ofthe search. The search can e.g. be performed...... as a synchronous (sequential) interval iteration:In each iteration step all components of the iterate are calculatedbased on the previous iterate. In this case it is straight forward to base simple interval existence and non-existencetests on the calculations done in each step of the iteration. The search can also...... on thecomponentwise calculations done in the course of the iteration. These componentwisetests are useful for parallel implementation of the search, sincethe tests can then be performed local to each processor and only when a test issuccessful do a processor communicate this result to other processors....

National Survey of Adult and Pediatric Reference Intervals in Clinical Laboratories across Canada: A Report of the CSCC Working Group on Reference Interval Harmonization.

Science.gov (United States)

Adeli, Khosrow; Higgins, Victoria; Seccombe, David; Collier, Christine P; Balion, Cynthia M; Cembrowski, George; Venner, Allison A; Shaw, Julie

2017-11-01

Reference intervals are widely used decision-making tools in laboratory medicine, serving as health-associated standards to interpret laboratory test results. Numerous studies have shown wide variation in reference intervals, even between laboratories using assays from the same manufacturer. Lack of consistency in either sample measurement or reference intervals across laboratories challenges the expectation of standardized patient care regardless of testing location. Here, we present data from a national survey conducted by the Canadian Society of Clinical Chemists (CSCC) Reference Interval Harmonization (hRI) Working Group that examines variation in laboratory reference sample measurements, as well as pediatric and adult reference intervals currently used in clinical practice across Canada. Data on reference intervals currently used by 37 laboratories were collected through a national survey to examine the variation in reference intervals for seven common laboratory tests. Additionally, 40 clinical laboratories participated in a baseline assessment by measuring six analytes in a reference sample. Of the seven analytes examined, alanine aminotransferase (ALT), alkaline phosphatase (ALP), and creatinine reference intervals were most variable. As expected, reference interval variation was more substantial in the pediatric population and varied between laboratories using the same instrumentation. Reference sample results differed between laboratories, particularly for ALT and free thyroxine (FT4). Reference interval variation was greater than test result variation for the majority of analytes. It is evident that there is a critical lack of harmonization in laboratory reference intervals, particularly for the pediatric population. Furthermore, the observed variation in reference intervals across instruments cannot be explained by the bias between the results obtained on instruments by different manufacturers. Copyright © 2017 The Canadian Society of Clinical Chemists

Final screening round of the NELSON lung cancer screening trial: the effect of a 2.5-year screening interval

NARCIS (Netherlands)

Yousaf-Khan, U.; Aalst, C. van der; Jong, P.A. de; Heuvelmans, M.; Scholten, E.T.; Lammers, J.-W.J.; Ooijen, P. van; Nackaerts, K.; Weenink, C.; Groen, H.; Vliegenthart, R.; Haaf, K. Ten; Oudkerk, M.; Koning, H. de

2016-01-01

In the USA annual lung cancer screening is recommended. However, the optimal screening strategy (eg, screening interval, screening rounds) is unknown. This study provides results of the fourth screening round after a 2.5-year interval in the Dutch-Belgian Lung Cancer Screening trial

Final screening round of the NELSON lung cancer screening trial : the effect of a 2.5-year screening interval

NARCIS (Netherlands)

Yousaf-Khan, Uraujh; van der Aalst, Carlijn; de Jong, Pim A; Heuvelmans, Marjolein; Scholten, Ernst; Lammers, Jan-Willem; van Ooijen, Peter; Nackaerts, Kristiaan; Weenink, Carla; Groen, Harry; Vliegenthart, Rozemarijn; Ten Haaf, Kevin; Oudkerk, Matthijs; de Koning, Harry

BACKGROUND: In the USA annual lung cancer screening is recommended. However, the optimal screening strategy (eg, screening interval, screening rounds) is unknown. This study provides results of the fourth screening round after a 2.5-year interval in the Dutch-Belgian Lung Cancer Screening trial

Final screening round of the NELSON lung cancer screening trial : the effect of a 2.5-year screening interval

NARCIS (Netherlands)

Yousaf-Khan, Uraujh; van der Aalst, Carlijn; de Jong, Pim A.; Heuvelmans, Marjolein; Scholten, Ernst; Lammers, Jan-Willem; van Ooijen, Peter; Nackaerts, Kristiaan; Weenink, Carla; Groen, Harry; Vliegenthart, Rozemarijn; Ten Haaf, Kevin; Oudkerk, Matthijs; de Koning, Harry

Background In the USA annual lung cancer screening is recommended. However, the optimal screening strategy (eg, screening interval, screening rounds) is unknown. This study provides results of the fourth screening round after a 2.5-year interval in the Dutch-Belgian Lung Cancer Screening trial

Quantifying the role of National Forest system lands in providing surface drinking water supply for the Southern United States

Science.gov (United States)

Peter Caldwell; Corinne Muldoon; Chelcy Ford-Miniat; Erika Cohen; Suzanne Krieger; Ge Sun; Steven McNulty; Paul V. Bolstad

2014-01-01

Forests and water are inextricably linked, and people are dependent on forested lands to provide clean, reliable water supplies for drinking and to support local economies. These water supplies are at risk of degradation from a growing population, continued conversion of forests to other land uses, and climate change. Given the variety of threats to surface water, it...

High-Intensity Interval Training in Normobaric Hypoxia Leads to Greater Body Fat Loss in Overweight/Obese Women than High-Intensity Interval Training in Normoxia

Directory of Open Access Journals (Sweden)

Alba Camacho-Cardenosa

2018-02-01

Full Text Available A moderate hypoxic stimulus is considered a promising therapeutic modality for several pathological states including obesity. There is scientific evidence suggesting that when hypoxia and physical activity are combined, they could provide benefits for the obese population. The aim of the present study was to investigate if exposure to hypoxia combined with two different protocols of high-intensity interval exercise in overweight/obese women was more effective compared with exercise in normoxia. Study participants included 82 overweight/obese women, who started a 12 week program of 36 sessions, and were randomly divided into four groups: (1 aerobic interval training in hypoxia (AitH; FiO2 = 17.2%; n = 13, (2 aerobic interval training in normoxia (AitN; n = 15, (3 sprint interval training in hypoxia (SitH; n = 15, and (4 sprint interval training in normoxia (SitN; n = 18. Body mass, body mass index, percentage of total fat mass, muscle mass, basal metabolic rate, fat, and carbohydrate oxidation, and fat and carbohydrate energy were assessed. Outcomes were measured at baseline (T1, after 18 training sessions (T2, 7 days after the last session (T3, and 4 weeks after the last session (T4. The fat mass in the SitH group was significantly reduced compared with the SitN group from T1 to T3 (p < 0.05 and from T1 to T4 (p < 0.05 and muscle mass increased significantly from T1 to T4 (p < 0.05. Fat mass in the AitH group decreased significantly (p < 0.01 and muscle mass increased (p = 0.022 compared with the AitN group from T1 to T4. All training groups showed a reduction in the percentage of fat mass, with a statistically significant reduction in the hypoxia groups (p < 0.05. Muscle mass increased significantly in the hypoxia groups (p < 0.05, especially at T4. While fat oxidation tended to increase and oxidation of carbohydrates tended to decrease in both hypoxia groups, the tendency was reversed in the normoxia groups. Thus, high-intensity interval

RR-Interval variance of electrocardiogram for atrial fibrillation detection

Science.gov (United States)

Nuryani, N.; Solikhah, M.; Nugoho, A. S.; Afdala, A.; Anzihory, E.

2016-11-01

Atrial fibrillation is a serious heart problem originated from the upper chamber of the heart. The common indication of atrial fibrillation is irregularity of R peak-to-R-peak time interval, which is shortly called RR interval. The irregularity could be represented using variance or spread of RR interval. This article presents a system to detect atrial fibrillation using variances. Using clinical data of patients with atrial fibrillation attack, it is shown that the variance of electrocardiographic RR interval are higher during atrial fibrillation, compared to the normal one. Utilizing a simple detection technique and variances of RR intervals, we find a good performance of atrial fibrillation detection.

Weighted overlap dominance – a procedure for interactive selection on multidimensional interval data

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Nielsen, Kurt

2011-01-01

We present an outranking procedure that supports selection of alternatives represented by multiple attributes with interval valued data. The procedure is interactive in the sense that the decision maker directs the search for preferred alternatives by providing weights of the different attributes...

Iterates of piecewise monotone mappings on an interval

CERN Document Server

Preston, Chris

1988-01-01

Piecewise monotone mappings on an interval provide simple examples of discrete dynamical systems whose behaviour can be very complicated. These notes are concerned with the properties of the iterates of such mappings. The material presented can be understood by anyone who has had a basic course in (one-dimensional) real analysis. The account concentrates on the topological (as opposed to the measure theoretical) aspects of the theory of piecewise monotone mappings. As well as offering an elementary introduction to this theory, these notes also contain a more advanced treatment of the problem of classifying such mappings up to topological conjugacy.

QT Interval in Pregnant and Non-pregnant Women

Directory of Open Access Journals (Sweden)

Majid Zamani

2014-03-01

Full Text Available Introduction: Prolongation of QT interval might result in dangerous cardiac arrhythmias, including Torsades de Pointes (TdP, consequently leading to syncope or death. A limited number of studies carried out in this respect to date have shown that QT interval might increase during pregnancy. On the other hand, it has been shown that each pregnancy might result in an increase in the risk of cardiac accidents in patients with long QT interval. Therefore, the present study was undertaken to compare QT intervals in pregnant and non-pregnant women. Methods: Pregnant women group consisted of 40 women in the second and third trimesters of pregnancy and the non-pregnant control group consisted of healthy women 18-35 years of age. All the patients underwent standard 12-lead electrocardiogram (ECG. The QT interval was measured for each patient at lead II. The mean corrected QT interval (QTc and QT dispersions (QTd were compared between the two groups. Results: Mean heart rates in the pregnant and non-pregnant groups were 98.55±14.09 and 72.53±13.17 beats/minutes (P<0.001. QTd and QTc means were in the normal range in both groups; however, these variables were 49.50±12.80 and 43.03±18.47 milliseconds in the pregnant group and 39.5±9.59 and 40.38±17.20 milliseconds in the control group, respectively (P<0.001. Conclusion: The QT interval was longer in pregnant women compared to non-pregnant women; however, it was in the normal range in both groups. Therefore, it is important to monitor and manage risk factors involved in prolongation of QT interval and prevent concurrence of these factors with pregnancy.

Differential Motor Unit Changes after Endurance or High-Intensity Interval Training.

Science.gov (United States)

Martinez-Valdes, Eduardo; Falla, Deborah; Negro, Francesco; Mayer, Frank; Farina, Dario

2017-06-01

Using a novel technique of high-density surface EMG decomposition and motor unit (MU) tracking, we compared changes in the properties of vastus medialis and vastus lateralis MU after endurance (END) and high-intensity interval training (HIIT). Sixteen men were assigned to the END or the HIIT group (n = 8 each) and performed six training sessions for 14 d. Each session consisted of 8-12 × 60-s intervals at 100% peak power output separated by 75 s of recovery (HIIT) or 90-120 min continuous cycling at ~65% V˙O2peak (END). Pre- and postintervention, participants performed 1) incremental cycling to determine V˙O2peak and peak power output and 2) maximal, submaximal (10%, 30%, 50%, and 70% maximum voluntary contraction [MVC]), and sustained (until task failure at 30% MVC) isometric knee extensions while high-density surface EMG signals were recorded from the vastus medialis and vastus lateralis. EMG signals were decomposed (submaximal contractions) into individual MU by convolutive blind source separation. Finally, MU were tracked across sessions by semiblind source separation. After training, END and HIIT improved V˙O2peak similarly (by 5.0% and 6.7%, respectively). The HIIT group showed enhanced maximal knee extension torque by ~7% (P = 0.02) and was accompanied by an increase in discharge rate for high-threshold MU (≥50% knee extension MVC) (P 0.05). HIIT and END induce different adjustments in MU discharge rate despite similar improvements in cardiopulmonary fitness. Moreover, the changes induced by HIIT are specific for high-threshold MU. For the first time, we show that HIIT and END induce specific neuromuscular adaptations, possibly related to differences in exercise load intensity and training volume.

Interval Forecast for Smooth Transition Autoregressive Model ...

African Journals Online (AJOL)

In this paper, we propose a simple method for constructing interval forecast for smooth transition autoregressive (STAR) model. This interval forecast is based on bootstrapping the residual error of the estimated STAR model for each forecast horizon and computing various Akaike information criterion (AIC) function. This new ...

A PRACTICAL MODEL OF LOW-VOLUME HIGH-INTENSITY INTERVAL TRAINING INDUCES PERFORMANCE AND METABOLIC ADAPTATIONS THAT RESEMBLE 'ALL-OUT' SPRINT INTERVAL TRAINING

Directory of Open Access Journals (Sweden)

Mahdi Bayati

2011-09-01

Full Text Available Recently, a novel type of high-intensity interval training known as sprint interval training has demonstrated increases in aerobic and anaerobic performance with very low time commitment. However, this type of training program is unpractical for general populations. The present study compared the impact of a low-volume high-intensity interval training to a "all-out" sprint interval training. Twenty-four active young males were recruited and randomized into three groups: (G1: 3-5 cycling bouts × 30-s all-out with 4 min recovery; G2: 6- 10 cycling bouts × 125% Pmax with 2 min recovery and a non-trained control group. They all performed a VO2max test, a time to exhaustion at Pmax (Tmax and a Wingate test before and after the intervention. Capillary blood lactate was taken at rest, 3, and 20 min after the Wingate trial. Training was performed 3 sessions per week for 4 weeks. In G1, significant improvements (p < 0.05 following training were found in VO2max (9.6%, power at VO2max (12.8%, Tmax (48.4%, peak power output (10.3% and mean power output (17.1%. In G2, significant improvements following training were found in VO2max (9.7%, power at VO2max (16.1%, Tmax (54.2%, peak power output (7.4%; p < 0.05, but mean power output did not change significantly. Blood lactate recovery (20th min significantly decreased in G1 and G2 when compared with pre-testing and the CON group (p < 0.05. In conclusion, the results of the current study agree with earlier work demonstrating the effectiveness of 30-s all-out training program to aerobic and anaerobic adaptations. Of substantial interest is that the low volume high intensity training provides similar results but involves only half the intensity with double the repetitions

Symbol interval optimization for molecular communication with drift.

Science.gov (United States)

Kim, Na-Rae; Eckford, Andrew W; Chae, Chan-Byoung

2014-09-01

In this paper, we propose a symbol interval optimization algorithm in molecular communication with drift. Proper symbol intervals are important in practical communication systems since information needs to be sent as fast as possible with low error rates. There is a trade-off, however, between symbol intervals and inter-symbol interference (ISI) from Brownian motion. Thus, we find proper symbol interval values considering the ISI inside two kinds of blood vessels, and also suggest no ISI system for strong drift models. Finally, an isomer-based molecule shift keying (IMoSK) is applied to calculate achievable data transmission rates (achievable rates, hereafter). Normalized achievable rates are also obtained and compared in one-symbol ISI and no ISI systems.

Symbol lock detection implemented with nonoverlapping integration intervals

Science.gov (United States)

Shihabi, Mazen M. (Inventor); Hinedi, Sami M. (Inventor); Shah, Biren N. (Inventor)

1995-01-01

A symbol lock detector is introduced for an incoming coherent digital communication signal which utilizes a subcarrier modulated with binary symbol data, d(sub k), and known symbol interval T by integrating binary values of the signal over nonoverlapping first and second intervals selected to be T/2, delaying the first integral an interval T/2, and either summing or multiplying the second integral with the first one that preceded it to form a value X(sub k). That value is then averaged over a number M of symbol intervals to produce a static value Y. A symbol lock decision can then be made when the static value Y exceeds a threshold level delta.

A Weak S-Implication on Interval Sets%区间集上的弱S-蕴涵

Institute of Scientific and Technical Information of China (English)

薛占熬; 程惠茹; 黄海松; 李跃军

2013-01-01

　　区间集是表达模糊信息的一种有效方法，蕴涵算子的研究是逻辑研究的关键，在区间集上构造蕴涵具有重要的研究价值。在区间集上构造了一个新的区间集弱S-蕴涵，证明了其正则性、单调性以及其他一些重要性质。最后证明了由它可构造剩余格，这为区间集的逻辑系统的建立提供了理论基础。%The theory of interval sets provides an effective method for expressing fuzzy information. Researching implication operators is a key step for fuzzy logic system. Thus it is very important to construct implication operators on interval sets. This paper constructs a new implication operator of interval sets, named as weak S-implication. Meanwhile, it proves the regularity, monotonicity and other important properties of weak S-implication. Finally, it proves that the residuated lattice is constituted under the S-implication operator on interval sets. This research provides a theoretical foundation for the logic system of interval sets.

Logarithmic Similarity Measure between Interval-Valued Fuzzy Sets and Its Fault Diagnosis Method

Directory of Open Access Journals (Sweden)

Zhikang Lu

2018-02-01

Full Text Available Fault diagnosis is an important task for the normal operation and maintenance of equipment. In many real situations, the diagnosis data cannot provide deterministic values and are usually imprecise or uncertain. Thus, interval-valued fuzzy sets (IVFSs are very suitable for expressing imprecise or uncertain fault information in real problems. However, existing literature scarcely deals with fault diagnosis problems, such as gasoline engines and steam turbines with IVFSs. However, the similarity measure is one of the important tools in fault diagnoses. Therefore, this paper proposes a new similarity measure of IVFSs based on logarithmic function and its fault diagnosis method for the first time. By the logarithmic similarity measure between the fault knowledge and some diagnosis-testing samples with interval-valued fuzzy information and its relation indices, we can determine the fault type and ranking order of faults corresponding to the relation indices. Then, the misfire fault diagnosis of the gasoline engine and the vibrational fault diagnosis of a turbine are presented to demonstrate the simplicity and effectiveness of the proposed diagnosis method. The fault diagnosis results of gasoline engine and steam turbine show that the proposed diagnosis method not only gives the main fault types of the gasoline engine and steam turbine but also provides useful information for multi-fault analyses and predicting future fault trends. Hence, the logarithmic similarity measure and its fault diagnosis method are main contributions in this study and they provide a useful new way for the fault diagnosis with interval-valued fuzzy information.

Dual-source CT coronary imaging in heart transplant recipients: image quality and optimal reconstruction interval

International Nuclear Information System (INIS)

Bastarrika, Gorka; Arraiza, Maria; Pueyo, Jesus C.; Cecco, Carlo N. de; Ubilla, Matias; Mastrobuoni, Stefano; Rabago, Gregorio

2008-01-01

The image quality and optimal reconstruction interval for coronary arteries in heart transplant recipients undergoing non-invasive dual-source computed tomography (DSCT) coronary angiography was evaluated. Twenty consecutive heart transplant recipients who underwent DSCT coronary angiography were included (19 male, one female; mean age 63.1±10.7 years). Data sets were reconstructed in 5% steps from 30% to 80% of the R-R interval. Two blinded independent observers assessed the image quality of each coronary segments using a five-point scale (from 0 = not evaluative to 4=excellent quality). A total of 289 coronary segments in 20 heart transplant recipients were evaluated. Mean heart rate during the scan was 89.1±10.4 bpm. At the best reconstruction interval, diagnostic image quality (score ≥2) was obtained in 93.4% of the coronary segments (270/289) with a mean image quality score of 3.04± 0.63. Systolic reconstruction intervals provided better image quality scores than diastolic reconstruction intervals (overall mean quality scores obtained with the systolic and diastolic reconstructions 3.03±1.06 and 2.73±1.11, respectively; P<0.001). Different systolic reconstruction intervals (35%, 40%, 45% of RR interval) did not yield to significant differences in image quality scores for the coronary segments (P=0.74). Reconstructions obtained at the systolic phase of the cardiac cycle allowed excellent diagnostic image quality coronary angiograms in heart transplant recipients undergoing DSCT coronary angiography. (orig.)

Haematological and biochemical reference intervals for free-ranging brown bears (Ursus arctos) in Sweden

Science.gov (United States)

2014-01-01

Background Establishment of haematological and biochemical reference intervals is important to assess health of animals on individual and population level. Reference intervals for 13 haematological and 34 biochemical variables were established based on 88 apparently healthy free-ranging brown bears (39 males and 49 females) in Sweden. The animals were chemically immobilised by darting from a helicopter with a combination of medetomidine, tiletamine and zolazepam in April and May 2006–2012 in the county of Dalarna, Sweden. Venous blood samples were collected during anaesthesia for radio collaring and marking for ecological studies. For each of the variables, the reference interval was described based on the 95% confidence interval, and differences due to host characteristics sex and age were included if detected. To our knowledge, this is the first report of reference intervals for free-ranging brown bears in Sweden. Results The following variables were not affected by host characteristics: red blood cell, white blood cell, monocyte and platelet count, alanine transaminase, amylase, bilirubin, free fatty acids, glucose, calcium, chloride, potassium, and cortisol. Age differences were seen for the majority of the haematological variables, whereas sex influenced only mean corpuscular haemoglobin concentration, aspartate aminotransferase, lipase, lactate dehydrogenase, β-globulin, bile acids, triglycerides and sodium. Conclusions The biochemical and haematological reference intervals provided and the differences due to host factors age and gender can be useful for evaluation of health status in free-ranging European brown bears. PMID:25139149

Interpretation of Confidence Interval Facing the Conflict

Science.gov (United States)

Andrade, Luisa; Fernández, Felipe

2016-01-01

As literature has reported, it is usual that university students in statistics courses, and even statistics teachers, interpret the confidence level associated with a confidence interval as the probability that the parameter value will be between the lower and upper interval limits. To confront this misconception, class activities have been…

New interval forecast for stationary autoregressive models ...

African Journals Online (AJOL)

In this paper, we proposed a new forecasting interval for stationary Autoregressive, AR(p) models using the Akaike information criterion (AIC) function. Ordinarily, the AIC function is used to determine the order of an AR(p) process. In this study however, AIC forecast interval compared favorably with the theoretical forecast ...

Feasibility Criteria for Interval Management Operations as Part of Arrival Management Operations

Science.gov (United States)

Levitt, Ian M.; Weitz, Lesley A.; Barmore, Bryan E.; Castle, Michael W.

2014-01-01

Interval Management (IM) is a future airborne spacing concept that aims to provide more precise inter-aircraft spacing to yield throughput improvements and greater use of fuel efficient trajectories for arrival and approach operations. To participate in an IM operation, an aircraft must be equipped with avionics that provide speeds to achieve and maintain an assigned spacing interval relative to another aircraft. It is not expected that all aircraft will be equipped with the necessary avionics, but rather that IM fits into a larger arrival management concept developed to support the broader mixed-equipage environment. Arrival management concepts are comprised of three parts: a ground-based sequencing and scheduling function to develop an overall arrival strategy, ground-based tools to support the management of aircraft to that schedule, and the IM tools necessary for the IM operation (i.e., ground-based set-up, initiation, and monitoring, and the flight-deck tools to conduct the IM operation). The Federal Aviation Administration is deploying a near-term ground-automation system to support metering operations in the National Airspace System, which falls within the first two components of the arrival management concept. This paper develops a methodology for determining the required delivery precision at controlled meter points for aircraft that are being managed to a schedule and aircraft being managed to a relative spacing interval in order to achieve desired flow rates and adequate separation at the meter points.

Confidence Intervals from Normalized Data: A correction to Cousineau (2005

Directory of Open Access Journals (Sweden)

Richard D. Morey

2008-09-01

Full Text Available Presenting confidence intervals around means is a common method of expressing uncertainty in data. Loftus and Masson (1994 describe confidence intervals for means in within-subjects designs. These confidence intervals are based on the ANOVA mean squared error. Cousineau (2005 presents an alternative to the Loftus and Masson method, but his method produces confidence intervals that are smaller than those of Loftus and Masson. I show why this is the case and offer a simple correction that makes the expected size of Cousineau confidence intervals the same as that of Loftus and Masson confidence intervals.

The Impact of Continuous and Interval Cycle Exercise on Affect and Enjoyment

Science.gov (United States)

Kilpatrick, Marcus W.; Greeley, Samuel J.; Collins, Larry H.

2015-01-01

Rates of physical activity remain low despite public health efforts. One form of physical activity that provides significant physiological benefit but has not been evaluated in terms of affective and enjoyment responses is interval exercise. Purpose: The purpose of this study was to compare affect and enjoyment assessed before, during, and after…

WASP (Write a Scientific Paper) using Excel - 6: Standard error and confidence interval.

Science.gov (United States)

Grech, Victor

2018-03-01

The calculation of descriptive statistics includes the calculation of standard error and confidence interval, an inevitable component of data analysis in inferential statistics. This paper provides pointers as to how to do this in Microsoft Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Robotic fish tracking method based on suboptimal interval Kalman filter

Science.gov (United States)

Tong, Xiaohong; Tang, Chao

2017-11-01

Autonomous Underwater Vehicle (AUV) research focused on tracking and positioning, precise guidance and return to dock and other fields. The robotic fish of AUV has become a hot application in intelligent education, civil and military etc. In nonlinear tracking analysis of robotic fish, which was found that the interval Kalman filter algorithm contains all possible filter results, but the range is wide, relatively conservative, and the interval data vector is uncertain before implementation. This paper proposes a ptimization algorithm of suboptimal interval Kalman filter. Suboptimal interval Kalman filter scheme used the interval inverse matrix with its worst inverse instead, is more approximate nonlinear state equation and measurement equation than the standard interval Kalman filter, increases the accuracy of the nominal dynamic system model, improves the speed and precision of tracking system. Monte-Carlo simulation results show that the optimal trajectory of sub optimal interval Kalman filter algorithm is better than that of the interval Kalman filter method and the standard method of the filter.

Confidence Interval Approximation For Treatment Variance In ...

African Journals Online (AJOL)

In a random effects model with a single factor, variation is partitioned into two as residual error variance and treatment variance. While a confidence interval can be imposed on the residual error variance, it is not possible to construct an exact confidence interval for the treatment variance. This is because the treatment ...

Interval logic. Proof theory and theorem proving

DEFF Research Database (Denmark)

Rasmussen, Thomas Marthedal

2002-01-01

of a direction of an interval, and present a sound and complete Hilbert proof system for it. Because of its generality, SIL can conveniently act as a general formalism in which other interval logics can be encoded. We develop proof theory for SIL including both a sequent calculus system and a labelled natural...

An Interval-Valued Intuitionistic Fuzzy TOPSIS Method Based on an Improved Score Function

Directory of Open Access Journals (Sweden)

Zhi-yong Bai

2013-01-01

Full Text Available This paper proposes an improved score function for the effective ranking order of interval-valued intuitionistic fuzzy sets (IVIFSs and an interval-valued intuitionistic fuzzy TOPSIS method based on the score function to solve multicriteria decision-making problems in which all the preference information provided by decision-makers is expressed as interval-valued intuitionistic fuzzy decision matrices where each of the elements is characterized by IVIFS value and the information about criterion weights is known. We apply the proposed score function to calculate the separation measures of each alternative from the positive and negative ideal solutions to determine the relative closeness coefficients. According to the values of the closeness coefficients, the alternatives can be ranked and the most desirable one(s can be selected in the decision-making process. Finally, two illustrative examples for multicriteria fuzzy decision-making problems of alternatives are used as a demonstration of the applications and the effectiveness of the proposed decision-making method.

THE EFFECTS OF INTERVAL FEEDBACK ON THE SELF-EFFICACY OF NETBALL UMPIRES

Directory of Open Access Journals (Sweden)

Alison J. Mahoney

2008-03-01

Full Text Available The present study used quantitative and qualitative methods to explore the relationship between interval feedback and self-efficacy toward umpiring netball games. Grade "A" level umpires (n = 7 provided feedback to umpires (n = 40 under two conditions; 1 interval feedback given at the end of one tournament game (after 14 minutes and again at the end of a second consecutive game (after 28 minutes, and 2 feedback at the end of the game (after 28 minutes. Umpires in both conditions completed an Umpiring Self-Efficacy Questionnaire (USEQ which was a 14-item measure designed to assess factors relevant to netball umpire performance. Participants completed the USEQ immediately before game one, during the interval, and after a second game. Umpires also completed a feedback questionnaire which enabled them to reflect on the feedback received. A repeated measures factorial (time x feedback condition ANOVA indicated no significant interaction effect (F = 0.05, p > .05, and no main effect for condition (F = 0.06, p > .05 or time (F = 1.61, p > .05 for changes in self-efficacy. Although there were no significant effects, qualitative data alluded to aspects of feedback perceived to enhance umpire self-efficacy, thus identifying ways in which feedback might have a more consistent effect. Practical implications of the study in relation to verbal interval feedback are discussed

Serial binary interval ratios improve rhythm reproduction

Directory of Open Access Journals (Sweden)

Xiang eWu

2013-08-01

Full Text Available Musical rhythm perception is a natural human ability that involves complex cognitive processes. Rhythm refers to the organization of events in time, and musical rhythms have an underlying hierarchical metrical structure. The metrical structure induces the feeling of a beat and the extent to which a rhythm induces the feeling of a beat is referred to as its metrical strength. Binary ratios are the most frequent interval ratio in musical rhythms. Rhythms with hierarchical binary ratios are better discriminated and reproduced than rhythms with hierarchical non-binary ratios. However, it remains unclear whether a superiority of serial binary over non-binary ratios in rhythm perception and reproduction exists. In addition, how different types of serial ratios influence the metrical strength of rhythms remains to be elucidated. The present study investigated serial binary vs. non-binary ratios in a reproduction task. Rhythms formed with exclusively binary (1:2:4:8, non-binary integer (1:3:5:6, and non-integer (1:2.3:5.3:6.4 ratios were examined within a constant meter. The results showed that the 1:2:4:8 rhythm type was more accurately reproduced than the 1:3:5:6 and 1:2.3:5.3:6.4 rhythm types, and the 1:2.3:5.3:6.4 rhythm type was more accurately reproduced than the 1:3:5:6 rhythm type. Further analyses showed that reproduction performance was better predicted by the distribution pattern of event occurrences within an inter-beat interval, than by the coincidence of events with beats, or the magnitude and complexity of interval ratios. Whereas rhythm theories and empirical data emphasize the role of the coincidence of events with beats in determining metrical strength and predicting rhythm performance, the present results suggest that rhythm processing may be better understood when the distribution pattern of event occurrences is taken into account. These results provide new insights into the mechanisms underlining musical rhythm perception.

Serial binary interval ratios improve rhythm reproduction.

Science.gov (United States)

Wu, Xiang; Westanmo, Anders; Zhou, Liang; Pan, Junhao

2013-01-01

Musical rhythm perception is a natural human ability that involves complex cognitive processes. Rhythm refers to the organization of events in time, and musical rhythms have an underlying hierarchical metrical structure. The metrical structure induces the feeling of a beat and the extent to which a rhythm induces the feeling of a beat is referred to as its metrical strength. Binary ratios are the most frequent interval ratio in musical rhythms. Rhythms with hierarchical binary ratios are better discriminated and reproduced than rhythms with hierarchical non-binary ratios. However, it remains unclear whether a superiority of serial binary over non-binary ratios in rhythm perception and reproduction exists. In addition, how different types of serial ratios influence the metrical strength of rhythms remains to be elucidated. The present study investigated serial binary vs. non-binary ratios in a reproduction task. Rhythms formed with exclusively binary (1:2:4:8), non-binary integer (1:3:5:6), and non-integer (1:2.3:5.3:6.4) ratios were examined within a constant meter. The results showed that the 1:2:4:8 rhythm type was more accurately reproduced than the 1:3:5:6 and 1:2.3:5.3:6.4 rhythm types, and the 1:2.3:5.3:6.4 rhythm type was more accurately reproduced than the 1:3:5:6 rhythm type. Further analyses showed that reproduction performance was better predicted by the distribution pattern of event occurrences within an inter-beat interval, than by the coincidence of events with beats, or the magnitude and complexity of interval ratios. Whereas rhythm theories and empirical data emphasize the role of the coincidence of events with beats in determining metrical strength and predicting rhythm performance, the present results suggest that rhythm processing may be better understood when the distribution pattern of event occurrences is taken into account. These results provide new insights into the mechanisms underlining musical rhythm perception.

Chaos on the interval

CERN Document Server

Ruette, Sylvie

2017-01-01

The aim of this book is to survey the relations between the various kinds of chaos and related notions for continuous interval maps from a topological point of view. The papers on this topic are numerous and widely scattered in the literature; some of them are little known, difficult to find, or originally published in Russian, Ukrainian, or Chinese. Dynamical systems given by the iteration of a continuous map on an interval have been broadly studied because they are simple but nevertheless exhibit complex behaviors. They also allow numerical simulations, which enabled the discovery of some chaotic phenomena. Moreover, the "most interesting" part of some higher-dimensional systems can be of lower dimension, which allows, in some cases, boiling it down to systems in dimension one. Some of the more recent developments such as distributional chaos, the relation between entropy and Li-Yorke chaos, sequence entropy, and maps with infinitely many branches are presented in book form for the first time. The author gi...

Applications of interval computations

CERN Document Server

Kreinovich, Vladik

1996-01-01

Primary Audience for the Book • Specialists in numerical computations who are interested in algorithms with automatic result verification. • Engineers, scientists, and practitioners who desire results with automatic verification and who would therefore benefit from the experience of suc­ cessful applications. • Students in applied mathematics and computer science who want to learn these methods. Goal Of the Book This book contains surveys of applications of interval computations, i. e. , appli­ cations of numerical methods with automatic result verification, that were pre­ sented at an international workshop on the subject in EI Paso, Texas, February 23-25, 1995. The purpose of this book is to disseminate detailed and surveyed information about existing and potential applications of this new growing field. Brief Description of the Papers At the most fundamental level, interval arithmetic operations work with sets: The result of a single arithmetic operation is the set of all possible results as the o...

Elements of patient-health-care provider communication related to cardiovascular rehabilitation referral.

Science.gov (United States)

Pourhabib, Sanam; Chessex, Caroline; Murray, Judy; Grace, Sherry L

2016-04-01

Cardiovascular rehabilitation has been designed to decrease the burden of cardiovascular disease. This study described (1) patient-health-care provider interactions regarding cardiovascular rehabilitation and (2) which discussion elements were related to patient referral. This was a prospective study of cardiovascular patients and their health-care providers. Discussion utterances were coded using the Roter Interaction Analysis System. Discussion between 26 health-care providers and 50 patients were recorded. Cardiovascular rehabilitation referral was related to greater health-care provider interactivity (odds ratio = 2.82, 95% confidence interval = 1.01-7.86) and less patient concern and worry (odds ratio = 0.64, 95% confidence interval = 0.45-0.89). Taking time for reciprocal discussion and allaying patient anxiety may promote greater referral. © The Author(s) 2014.

QT interval in healthy dogs: which method of correcting the QT interval in dogs is appropriate for use in small animal clinics?

Directory of Open Access Journals (Sweden)

Maira S. Oliveira

2014-05-01

Full Text Available The electrocardiography (ECG QT interval is influenced by fluctuations in heart rate (HR what may lead to misinterpretation of its length. Considering that alterations in QT interval length reflect abnormalities of the ventricular repolarisation which predispose to occurrence of arrhythmias, this variable must be properly evaluated. The aim of this work is to determine which method of correcting the QT interval is the most appropriate for dogs regarding different ranges of normal HR (different breeds. Healthy adult dogs (n=130; German Shepherd, Boxer, Pit Bull Terrier, and Poodle were submitted to ECG examination and QT intervals were determined in triplicates from the bipolar limb II lead and corrected for the effects of HR through the application of three published formulae involving quadratic, cubic or linear regression. The mean corrected QT values (QTc obtained using the diverse formulae were significantly different (ρ<0.05, while those derived according to the equation QTcV = QT + 0.087(1- RR were the most consistent (linear regression. QTcV values were strongly correlated (r=0.83 with the QT interval and showed a coefficient of variation of 8.37% and a 95% confidence interval of 0.22-0.23 s. Owing to its simplicity and reliability, the QTcV was considered the most appropriate to be used for the correction of QT interval in dogs.

Rigorous Verification for the Solution of Nonlinear Interval System ...

African Journals Online (AJOL)

We survey a general method for solving nonlinear interval systems of equations. In particular, we paid special attention to the computational aspects of linear interval systems since the bulk of computations are done during the stage of computing outer estimation of the including linear interval systems. The height of our ...

Estimation of individual reference intervals in small sample sizes

DEFF Research Database (Denmark)

Hansen, Ase Marie; Garde, Anne Helene; Eller, Nanna Hurwitz

2007-01-01

In occupational health studies, the study groups most often comprise healthy subjects performing their work. Sampling is often planned in the most practical way, e.g., sampling of blood in the morning at the work site just after the work starts. Optimal use of reference intervals requires...... from various variables such as gender, age, BMI, alcohol, smoking, and menopause. The reference intervals were compared to reference intervals calculated using IFCC recommendations. Where comparable, the IFCC calculated reference intervals had a wider range compared to the variance component models...

Effects of Short-Interval and Long-Interval Swimming Protocols on Performance, Aerobic Adaptations, and Technical Parameters: A Training Study.

Science.gov (United States)

Dalamitros, Athanasios A; Zafeiridis, Andreas S; Toubekis, Argyris G; Tsalis, George A; Pelarigo, Jailton G; Manou, Vasiliki; Kellis, Spiridon

2016-10-01

Dalamitros, AA, Zafeiridis, AS, Toubekis, AG, Tsalis, GA, Pelarigo, JG, Manou, V, and Kellis, S. Effects of short-interval and long-interval swimming protocols on performance, aerobic adaptations, and technical parameters: A training study. J Strength Cond Res 30(10): 2871-2879, 2016-This study compared 2-interval swimming training programs of different work interval durations, matched for total distance and exercise intensity, on swimming performance, aerobic adaptations, and technical parameters. Twenty-four former swimmers were equally divided to short-interval training group (INT50, 12-16 × 50 m with 15 seconds rest), long-interval training group (INT100, 6-8 × 100 m with 30 seconds rest), and a control group (CON). The 2 experimental groups followed the specified swimming training program for 8 weeks. Before and after training, swimming performance, technical parameters, and indices of aerobic adaptations were assessed. ΙΝΤ50 and ΙΝΤ100 improved swimming performance in 100 and 400-m tests and the maximal aerobic speed (p ≤ 0.05); the performance in the 50-m swim did not change. Posttraining V[Combining Dot Above]O2max values were higher compared with pretraining values in both training groups (p ≤ 0.05), whereas peak aerobic power output increased only in INT100 (p ≤ 0.05). The 1-minute heart rate and blood lactate recovery values decreased after training in both groups (p training in both groups (p ≤ 0.05); no changes were observed in stroke rate after training. Comparisons between groups on posttraining mean values, after adjusting for pretraining values, revealed no significant differences between ΙΝΤ50 and ΙΝΤ100 for all variables; however, all measures were improved vs. the respective values in the CON (p training.

Evaluation of SAMe-TT2R2 Score on Predicting Success With Extended-Interval Warfarin Monitoring.

Science.gov (United States)

Hwang, Andrew Y; Carris, Nicholas W; Dietrich, Eric A; Gums, John G; Smith, Steven M

2018-06-01

In patients with stable international normalized ratios, 12-week extended-interval warfarin monitoring can be considered; however, predictors of success with this strategy are unknown. The previously validated SAMe-TT 2 R 2 score (considering sex, age, medical history, treatment, tobacco, and race) predicts anticoagulation control during standard follow-up (every 4 weeks), with lower scores associated with greater time in therapeutic range. To evaluate the ability of the SAMe-TT 2 R 2 score in predicting success with extended-interval warfarin follow-up in patients with previously stable warfarin doses. In this post hoc analysis of a single-arm feasibility study, baseline SAMe-TT 2 R 2 scores were calculated for patients with ≥1 extended-interval follow-up visit. The primary analysis assessed achieved weeks of extended-interval follow-up according to baseline SAMe-TT 2 R 2 scores. A total of 47 patients receiving chronic anticoagulation completed a median of 36 weeks of extended-interval follow-up. The median baseline SAMe-TT 2 R 2 score was 1 (range 0-5). Lower SAMe-TT 2 R 2 scores appeared to be associated with greater duration of extended-interval follow-up achieved, though the differences between scores were not statistically significant. No individual variable of the SAMe-TT 2 R 2 score was associated with achieved weeks of extended-interval follow-up. Analysis of additional patient factors found that longer duration (≥24 weeks) of prior stable treatment was significantly associated with greater weeks of extended-interval follow-up completed ( P = 0.04). Conclusion and Relevance: This pilot study provides limited evidence that the SAMe-TT 2 R 2 score predicts success with extended-interval warfarin follow-up but requires confirmation in a larger study. Further research is also necessary to establish additional predictors of successful extended-interval warfarin follow-up.

RESEARCH ON THE INFLLUENCE OF THE CALVING INTERVAL ON MILK YIELD

Directory of Open Access Journals (Sweden)

Agatha POPESCU

2014-04-01

Full Text Available The paper goal was to study the influence of the calving interval on milk yield for the Romanian Brown breed, using 950 lactations, of which: 573 lactations (60.31 % belonged to the over 400 days calving interval and 377 lactations (39.69% belonged to the 351-400 days calving interval. The calving interval varied between 446.41±18.94 days, the highest length for the 51 dairy cows which had parturition in September and 373.49 ±14.28 days, the shortest length for 53 cows which calved in October. The average calving interval for the cows with a calving interval longer than 400 days accounted for 425.58±14.10 days, while the average calving interval for the cows with this reproductionindicator between 351 and 400 days was 358.65±10.07 days. For the cows whose calving interval was longer than 400 days, milk yield accounted for 4,682.5±124.92 while for the cows whose calving interval varied between 351 and 400 days registered 4,240.0±215.10 kg. The calculations revealed a gross product of Lei 6,087 per lactation in case of cows whose calving interval was longer than 400 days and Lei 5,512 in case of the cows whose calving interval varied between 351-400 days. For an average difference of 66.93 days calving interval between the two calving interval size groups taken into consideration, the milk yield difference accounted for 442.50 kg in the benefit of the cows with the calving interval longer than 400 days. Also, a difference of Lei 575 was recorded in the favor of the cows with calving intervals longer than 400 days because they registered higher a milk yield. This means Lei 8.59 additional income per cow and calving interval day longer than 400 days.

The prognostic value of the QT interval and QT interval dispersion in all-cause and cardiac mortality and morbidity in a population of Danish citizens

DEFF Research Database (Denmark)

Elming, H; Holm, E; Jun, L

1998-01-01

with a prolonged QT interval (430 ms or more) or prolonged QT interval dispersion (80 ms or more) were at higher risk of cardiovascular death and cardiac morbidity than subjects whose QT interval was less than 360 ms, or whose QT interval dispersion was less than 30 ms. Cardiovascular death relative risk ratios...

On Some Nonclassical Algebraic Properties of Interval-Valued Fuzzy Soft Sets

Science.gov (United States)

2014-01-01

Interval-valued fuzzy soft sets realize a hybrid soft computing model in a general framework. Both Molodtsov's soft sets and interval-valued fuzzy sets can be seen as special cases of interval-valued fuzzy soft sets. In this study, we first compare four different types of interval-valued fuzzy soft subsets and reveal the relations among them. Then we concentrate on investigating some nonclassical algebraic properties of interval-valued fuzzy soft sets under the soft product operations. We show that some fundamental algebraic properties including the commutative and associative laws do not hold in the conventional sense, but hold in weaker forms characterized in terms of the relation =L. We obtain a number of algebraic inequalities of interval-valued fuzzy soft sets characterized by interval-valued fuzzy soft inclusions. We also establish the weak idempotent law and the weak absorptive law of interval-valued fuzzy soft sets using interval-valued fuzzy soft J-equal relations. It is revealed that the soft product operations ∧ and ∨ of interval-valued fuzzy soft sets do not always have similar algebraic properties. Moreover, we find that only distributive inequalities described by the interval-valued fuzzy soft L-inclusions hold for interval-valued fuzzy soft sets. PMID:25143964

On Some Nonclassical Algebraic Properties of Interval-Valued Fuzzy Soft Sets

Directory of Open Access Journals (Sweden)

Xiaoyan Liu

2014-01-01

Full Text Available Interval-valued fuzzy soft sets realize a hybrid soft computing model in a general framework. Both Molodtsov’s soft sets and interval-valued fuzzy sets can be seen as special cases of interval-valued fuzzy soft sets. In this study, we first compare four different types of interval-valued fuzzy soft subsets and reveal the relations among them. Then we concentrate on investigating some nonclassical algebraic properties of interval-valued fuzzy soft sets under the soft product operations. We show that some fundamental algebraic properties including the commutative and associative laws do not hold in the conventional sense, but hold in weaker forms characterized in terms of the relation =L. We obtain a number of algebraic inequalities of interval-valued fuzzy soft sets characterized by interval-valued fuzzy soft inclusions. We also establish the weak idempotent law and the weak absorptive law of interval-valued fuzzy soft sets using interval-valued fuzzy soft J-equal relations. It is revealed that the soft product operations ∧ and ∨ of interval-valued fuzzy soft sets do not always have similar algebraic properties. Moreover, we find that only distributive inequalities described by the interval-valued fuzzy soft L-inclusions hold for interval-valued fuzzy soft sets.

On some nonclassical algebraic properties of interval-valued fuzzy soft sets.

Science.gov (United States)

Liu, Xiaoyan; Feng, Feng; Zhang, Hui

2014-01-01

Interval-valued fuzzy soft sets realize a hybrid soft computing model in a general framework. Both Molodtsov's soft sets and interval-valued fuzzy sets can be seen as special cases of interval-valued fuzzy soft sets. In this study, we first compare four different types of interval-valued fuzzy soft subsets and reveal the relations among them. Then we concentrate on investigating some nonclassical algebraic properties of interval-valued fuzzy soft sets under the soft product operations. We show that some fundamental algebraic properties including the commutative and associative laws do not hold in the conventional sense, but hold in weaker forms characterized in terms of the relation = L . We obtain a number of algebraic inequalities of interval-valued fuzzy soft sets characterized by interval-valued fuzzy soft inclusions. We also establish the weak idempotent law and the weak absorptive law of interval-valued fuzzy soft sets using interval-valued fuzzy soft J-equal relations. It is revealed that the soft product operations ∧ and ∨ of interval-valued fuzzy soft sets do not always have similar algebraic properties. Moreover, we find that only distributive inequalities described by the interval-valued fuzzy soft L-inclusions hold for interval-valued fuzzy soft sets.

Field application. Selective stimulation of reservoirs or perforated intervals with use of coiled tubing equipped with real-time data communication system in combination with straddle packer assemblies

Energy Technology Data Exchange (ETDEWEB)

Oberascher, R.; Breimer, G. [GDF SUEZ E and P Deutschland GmbH, Lingen (Germany); Jonge, R.M. de [Baker Hughes (Netherlands)

2013-08-01

In two German gas wells a decline in production and wellhead pressures had been observed. Production logging data obtained by PLT surveys were evaluated, which showed that certain intervals within the reservoir section did not contribute, or showed a restricted contribution to the overall gas production. The restricted contribution was suspected to be caused by near-wellbore damage. To restore or enhance the production of the perforated intervals an acid treatment was considered in these wells in order to remove skin damage. To restore or enhance the production of the wells, an acid treatment of the perforated intervals was designed. For obtaining the required selective placement of the acid across the zones of interest, the use of coiled tubing (CT) in combination with a resettable straddle packer assembly was selected. The accuracy of the setting depth of the straddle packer was a critical issue for the execution of the well intervention operations. In order to obtain the required depth accuracy, the CT string was equipped with an intelligent CT communication system, which transfers real-time downhole data to surface. For the first time, a reservoir stimulation project was executed by combining CT equipped with a real-time data communication system (TeleCoil) and the Inflatable Straddle Acidizing Packer (ISAP) assembly. Inside the CT an encapsulated monoconductor cable was installed to transmit real-time data from the CT Bottom Hole Assembly (BHA) to surface. The BHA consists of a Casing Collar Locator (CCL) and downhole pressure and temperature gauges. Due to the protective jacket of the monoconductor cable, there are no restrictions in the use of different fluids in combination with the system. Information provided by the CCL monitoring tool ensures accurate depth correlations, whereas differential pressure measurements from the down-hole pressure gauges provide positive information about the setting and sealing conditions of the straddle packer assembly. The

Five-Year Risk of Interval-Invasive Second Breast Cancer

Science.gov (United States)

Buist, Diana S. M.; Houssami, Nehmat; Dowling, Emily C.; Halpern, Elkan F.; Gazelle, G. Scott; Lehman, Constance D.; Henderson, Louise M.; Hubbard, Rebecca A.

2015-01-01

Background: Earlier detection of second breast cancers after primary breast cancer (PBC) treatment improves survival, yet mammography is less accurate in women with prior breast cancer. The purpose of this study was to examine women presenting clinically with second breast cancers after negative surveillance mammography (interval cancers), and to estimate the five-year risk of interval-invasive second cancers for women with varying risk profiles. Methods: We evaluated a prospective cohort of 15 114 women with 47 717 surveillance mammograms diagnosed with stage 0-II unilateral PBC from 1996 through 2008 at facilities in the Breast Cancer Surveillance Consortium. We used discrete time survival models to estimate the association between odds of an interval-invasive second breast cancer and candidate predictors, including demographic, PBC, and imaging characteristics. All statistical tests were two-sided. Results: The cumulative incidence of second breast cancers after five years was 54.4 per 1000 women, with 325 surveillance-detected and 138 interval-invasive second breast cancers. The five-year risk of interval-invasive second cancer for women with referent category characteristics was 0.60%. For women with the most and least favorable profiles, the five-year risk ranged from 0.07% to 6.11%. Multivariable modeling identified grade II PBC (odds ratio [OR] = 1.95, 95% confidence interval [CI] = 1.15 to 3.31), treatment with lumpectomy without radiation (OR = 3.27, 95% CI = 1.91 to 5.62), interval PBC presentation (OR = 2.01, 95% CI 1.28 to 3.16), and heterogeneously dense breasts on mammography (OR = 1.54, 95% CI = 1.01 to 2.36) as independent predictors of interval-invasive second breast cancers. Conclusions: PBC diagnosis and treatment characteristics contribute to variation in subsequent-interval second breast cancer risk. Consideration of these factors may be useful in developing tailored post-treatment imaging surveillance plans. PMID:25904721

A method to elicit beliefs as most likely intervals

NARCIS (Netherlands)

Schlag, K.H.; van der Weele, J.J.

2015-01-01

We show how to elicit the beliefs of an expert in the form of a "most likely interval", a set of future outcomes that are deemed more likely than any other outcome. Our method, called the Most Likely Interval elicitation rule (MLI), asks the expert for an interval and pays according to how well the

A novel test method for quantifying surface tack of polypropylene compound surfaces

Directory of Open Access Journals (Sweden)

2011-11-01

Full Text Available While adhesiveness is required for polymer surfaces in special applications, tacky surfaces are generally undesirable in many applications like automotive interior parts. The tackiness of polymer surface results from a combination of composition and additivation, and it can change significantly in natural or accelerated ageing. Since there is no established, uniform method to characterize surface tack, the major focus of the present work was on the development of an objective quantification method. A setup having a soft die tip attached to a standard tensile tester was developed aiming for correlation to the human sense of touch. Three different model thermoplastic polyolefin (TPO compound formulations based on a high-impact isotactic polypropylene (iPP composition with varying amounts and types of anti-scratch additives were used for these investigations. As the surface tack phenomenon is related to ageing and weathering, the material’s examination was also performed after various intervals of weathering. The developed method allows a fast assessment of the effect of polymer composition variations and different additive formulations on surface tack and gives identical rankings as the standardized haptic panel.

Identification of atrial fibrillation using electrocardiographic RR-interval difference

Science.gov (United States)

Eliana, M.; Nuryani, N.

2017-11-01

Automated detection of atrial fibrillation (AF) is an interesting topic. It is an account of very dangerous, not only as a trigger of embolic stroke, but it’s also related to some else chronical disease. In this study, we analyse the presence of AF by determining irregularities of RR-interval. We utilize the interval comparison to measure the degree of irregularities of RR-interval in a defined segment. The series of RR-interval is segmented with the length of 10 of them. In this study, we use interval comparison for the method. We were comparing all of the intervals there each other. Then we put the threshold to define the low difference and high difference (δ). A segment is defined as AF or Normal Sinus by the number of high δ, so we put the tolerance (β) of high δ there. We have used this method to test the 23 patients data from MIT-BIH. Using the approach and the clinical data we find accuracy, sensitivity, and specificity of 84.98%, 91.99%, and 77.85% respectively.

An optimal dynamic interval preventive maintenance scheduling for series systems

International Nuclear Information System (INIS)

Gao, Yicong; Feng, Yixiong; Zhang, Zixian; Tan, Jianrong

2015-01-01

This paper studies preventive maintenance (PM) with dynamic interval for a multi-component system. Instead of equal interval, the time of PM period in the proposed dynamic interval model is not a fixed constant, which varies from interval-down to interval-up. It is helpful to reduce the outage loss on frequent repair parts and avoid lack of maintenance of the equipment by controlling the equipment maintenance frequency, when compared to a periodic PM scheme. According to the definition of dynamic interval, the reliability of system is analyzed from the failure mechanisms of its components and the different effects of non-periodic PM actions on the reliability of the components. Following the proposed model of reliability, a novel framework for solving the non-periodical PM schedule with dynamic interval based on the multi-objective genetic algorithm is proposed. The framework denotes the strategies include updating strategy, deleting strategy, inserting strategy and moving strategy, which is set to correct the invalid population individuals of the algorithm. The values of the dynamic interval and the selections of PM action for the components on every PM stage are determined by achieving a certain level of system availability with the minimum total PM-related cost. Finally, a typical rotary table system of NC machine tool is used as an example to describe the proposed method. - Highlights: • A non-periodic preventive maintenance scheduling model is proposed. • A framework for solving the non-periodical PM schedule problem is developed. • The interval of non-periodic PM is flexible and schedule can be better adjusted. • Dynamic interval leads to more efficient solutions than fixed interval does

The application of a layer of carbonaceous material to a surface

International Nuclear Information System (INIS)

Holland, L.A.

1981-01-01

A method of applying a carbonaceous material to a surface is described. It consists of exposing the surface to an ionised gas atmosphere generated in a gas consisting substantially of carbon and hydrogen, and applying to the surface through capacitive means an electrical potential which changes in sign at time intervals of between 5 x 10 -9 seconds and 10 -6 seconds. (author)

Active faulting in the central Betic Cordillera (Spain): Palaeoseismological constraint of the surface-rupturing history of the Baza Fault (Central Betic Cordillera, Iberian Peninsula)

Science.gov (United States)

Castro, J.; Martin-Rojas, I.; Medina-Cascales, I.; García-Tortosa, F. J.; Alfaro, P.; Insua-Arévalo, J. M.

2018-06-01

This paper on the Baza Fault provides the first palaeoseismic data from trenches in the central sector of the Betic Cordillera (S Spain), one of the most tectonically active areas of the Iberian Peninsula. With the palaeoseismological data we constructed time-stratigraphic OxCal models that yield probability density functions (PDFs) of individual palaeoseismic event timing. We analysed PDF overlap to quantitatively correlate the walls and site events into a single earthquake chronology. We assembled a surface-rupturing history of the Baza Fault for the last ca. 45,000 years. We postulated six alternative surface rupturing histories including 8-9 fault-wide earthquakes. We calculated fault-wide earthquake recurrence intervals using Monte Carlo. This analysis yielded a 4750-5150 yr recurrence interval. Finally, compared our results with the results from empirical relationships. Our results will provide a basis for future analyses of more of other active normal faults in this region. Moreover, our results will be essential for improving earthquake-probability assessments in Spain, where palaeoseismic data are scarce.

Stereophotogrammetric study of surface topography in ion irradiated silver

International Nuclear Information System (INIS)

Sokolov, V.N.; Fayazov, I.M.

1993-01-01

The irradiated surface topography of polycrystalline silver was studied using the stereophotogrammetric method. The surface of silver was irradiated with 30 keV argon ions at variation for the ion incidence angle in interval of 0-80 deg relative to a surface normal. The influence of the inclination angle of the sample in the SEM on the cone shape of a SEM-picture of the irradiated surface is discussed. The parameters of cones on the irradiated surface of silver were measured by the SEM-stereomethod. The measurements of the sample section perpendicular to the incidence plane are also carried out

Abstract: Inference and Interval Estimation for Indirect Effects With Latent Variable Models.

Science.gov (United States)

Falk, Carl F; Biesanz, Jeremy C

2011-11-30

Models specifying indirect effects (or mediation) and structural equation modeling are both popular in the social sciences. Yet relatively little research has compared methods that test for indirect effects among latent variables and provided precise estimates of the effectiveness of different methods. This simulation study provides an extensive comparison of methods for constructing confidence intervals and for making inferences about indirect effects with latent variables. We compared the percentile (PC) bootstrap, bias-corrected (BC) bootstrap, bias-corrected accelerated (BC a ) bootstrap, likelihood-based confidence intervals (Neale & Miller, 1997), partial posterior predictive (Biesanz, Falk, and Savalei, 2010), and joint significance tests based on Wald tests or likelihood ratio tests. All models included three reflective latent variables representing the independent, dependent, and mediating variables. The design included the following fully crossed conditions: (a) sample size: 100, 200, and 500; (b) number of indicators per latent variable: 3 versus 5; (c) reliability per set of indicators: .7 versus .9; (d) and 16 different path combinations for the indirect effect (α = 0, .14, .39, or .59; and β = 0, .14, .39, or .59). Simulations were performed using a WestGrid cluster of 1680 3.06GHz Intel Xeon processors running R and OpenMx. Results based on 1,000 replications per cell and 2,000 resamples per bootstrap method indicated that the BC and BC a bootstrap methods have inflated Type I error rates. Likelihood-based confidence intervals and the PC bootstrap emerged as methods that adequately control Type I error and have good coverage rates.

MRI of the rotator interval of the shoulder

International Nuclear Information System (INIS)

Lee, J.C.; Guy, S.; Connell, D.; Saifuddin, A.; Lambert, S.

2007-01-01

The rotator interval of the shoulder joint is located between the distal edges of the supraspinatus and subscapularis tendons and contains the insertions of the coracohumeral and superior glenohumeral ligaments. These structures form a complex pulley system that stabilizes the long head of the biceps tendon as it enters the bicipital groove of the humeral head. The rotator interval is the site of a variety of pathological processes including biceps tendon lesions, adhesive capsulitis and anterosuperior internal impingement. This article describes the anatomy, function and pathology of the rotator interval using magnetic resonance imaging (MRI)

Time interval measurement between two emissions: Ar + Au

International Nuclear Information System (INIS)

Bizard, G.; Bougault, R.; Brou, R.; Buta, A.; Durand, D.; Genoux-Lubain, A.; Hamdani, T.; Horn, D.; Laville, J.L.; Le Brun, C.; Lecolley, J.F.; Louvel, M.; Peter, J.; Regimbart, R.; Steckmeyer, J.C.; Tamain, B.

1998-01-01

The Ar + Au system was studied at two bombarding energies, 30 and 60 A.MeV. The comparison of the distributions of fragment emission angles in central collisions was carried out by means of a simulation allowing the emission time interval variation. It was found that this interval depends on the bombarding energy (i.e. deposed excitation energy).For 30 A.MeV this interval is 500 fm/c (0.33 · 10 -23 s), while for 60 A.MeV it is so short that the multifragmentation concept can be used

Multiple sectioning and perforation techniques for TEM sub-surface studies

International Nuclear Information System (INIS)

Lee, E.H.; Rowcliffe, A.F.

1978-01-01

Techniques for preparing multiple electron transparent regions at several depth levels below the surface of a metal disk specimen are described. These techniques are relatively rapid and find application in many areas involving surface studies. Examples are shown of multiple thin areas produced at intervals of approximately 200 nm below the original surface of a stainless steel bombarded with 4 MeV Ni +2 ions for void swelling studies

NHSBSP type 1 interval cancers: a scientifically valid grouping?

International Nuclear Information System (INIS)

Porter, G.J.R.; Evans, A.J.; Burrell, H.C.; Lee, A.H.S.; Chakrabarti, J.

2007-01-01

Aim: To assess whether there are differences in the pathological features or survival between the new National Health Service Breast Screening Programme (NHSBSP) interval cancer classification system category of type 1 interval cancers, and the previously used, separate categories of occult, unclassified, and true interval cancers. Materials and methods: The prognostic pathological features (grade, lymph node stage, size, vascular invasion, oestrogen receptor status, and histological type) and survival of 428 type 1 interval invasive breast cancers were analysed by subgroup (occult, unclassified and true interval). Results: Occult cancers compared with other type 1 interval cancers were of significantly lower grade [38 of 52 (73%) versus 151 of 340 (44%) grade 1 or 2, p = 0.0005], more likely to be smaller size [37 of 51 (73%) versus 158 of 341 (46%) <20 mm, p = 0.0003] and more frequently of lobular type at histology [14 of 42 (32%) versus 50 of 286 (17%), p = 0.03]. There was no significant difference in pathological features of unclassified tumours compared with other type 1 tumours. There was no significant survival difference between different type 1 subgroups (p = 0.12). Conclusion: The NHSBSP type 1 interval cancers are a heterogeneous grouping with markedly differing pathological features. However, no significant survival difference is seen between the different type 1 subgroups

NHSBSP type 1 interval cancers: a scientifically valid grouping?

Energy Technology Data Exchange (ETDEWEB)

Porter, G.J.R. [Nottingham Breast Institute, City Hospital, Nottingham (United Kingdom)]. E-mail: garethporter@doctors.org.uk; Evans, A.J. [Nottingham Breast Institute, City Hospital, Nottingham (United Kingdom); Burrell, H.C. [Nottingham Breast Institute, City Hospital, Nottingham (United Kingdom); Lee, A.H.S. [Nottingham Breast Institute, City Hospital, Nottingham (United Kingdom); Chakrabarti, J. [Nottingham Breast Institute, City Hospital, Nottingham (United Kingdom)

2007-03-15

Aim: To assess whether there are differences in the pathological features or survival between the new National Health Service Breast Screening Programme (NHSBSP) interval cancer classification system category of type 1 interval cancers, and the previously used, separate categories of occult, unclassified, and true interval cancers. Materials and methods: The prognostic pathological features (grade, lymph node stage, size, vascular invasion, oestrogen receptor status, and histological type) and survival of 428 type 1 interval invasive breast cancers were analysed by subgroup (occult, unclassified and true interval). Results: Occult cancers compared with other type 1 interval cancers were of significantly lower grade [38 of 52 (73%) versus 151 of 340 (44%) grade 1 or 2, p = 0.0005], more likely to be smaller size [37 of 51 (73%) versus 158 of 341 (46%) <20 mm, p = 0.0003] and more frequently of lobular type at histology [14 of 42 (32%) versus 50 of 286 (17%), p = 0.03]. There was no significant difference in pathological features of unclassified tumours compared with other type 1 tumours. There was no significant survival difference between different type 1 subgroups (p = 0.12). Conclusion: The NHSBSP type 1 interval cancers are a heterogeneous grouping with markedly differing pathological features. However, no significant survival difference is seen between the different type 1 subgroups.

CIMP status of interval colon cancers: another piece to the puzzle.

Science.gov (United States)

Arain, Mustafa A; Sawhney, Mandeep; Sheikh, Shehla; Anway, Ruth; Thyagarajan, Bharat; Bond, John H; Shaukat, Aasma

2010-05-01

Colon cancers diagnosed in the interval after a complete colonoscopy may occur due to limitations of colonoscopy or due to the development of new tumors, possibly reflecting molecular and environmental differences in tumorigenesis resulting in rapid tumor growth. In a previous study from our group, interval cancers (colon cancers diagnosed within 5 years of a complete colonoscopy) were almost four times more likely to demonstrate microsatellite instability (MSI) than non-interval cancers. In this study we extended our molecular analysis to compare the CpG island methylator phenotype (CIMP) status of interval and non-interval colorectal cancers and investigate the relationship between the CIMP and MSI pathways in the pathogenesis of interval cancers. We searched our institution's cancer registry for interval cancers, defined as colon cancers that developed within 5 years of a complete colonoscopy. These were frequency matched in a 1:2 ratio by age and sex to patients with non-interval cancers (defined as colon cancers diagnosed on a patient's first recorded colonoscopy). Archived cancer specimens for all subjects were retrieved and tested for CIMP gene markers. The MSI status of subjects identified between 1989 and 2004 was known from our previous study. Tissue specimens of newly identified cases and controls (between 2005 and 2006) were tested for MSI. There were 1,323 cases of colon cancer diagnosed over the 17-year study period, of which 63 were identified as having interval cancer and matched to 131 subjects with non-interval cancer. Study subjects were almost all Caucasian men. CIMP was present in 57% of interval cancers compared to 33% of non-interval cancers (P=0.004). As shown previously, interval cancers were more likely than non-interval cancers to occur in the proximal colon (63% vs. 39%; P=0.002), and have MSI 29% vs. 11%, P=0.004). In multivariable logistic regression model, proximal location (odds ratio (OR) 1.85; 95% confidence interval (CI) 1

A comparison of confidence interval methods for the intraclass correlation coefficient in community-based cluster randomization trials with a binary outcome.

Science.gov (United States)

Braschel, Melissa C; Svec, Ivana; Darlington, Gerarda A; Donner, Allan

2016-04-01

Many investigators rely on previously published point estimates of the intraclass correlation coefficient rather than on their associated confidence intervals to determine the required size of a newly planned cluster randomized trial. Although confidence interval methods for the intraclass correlation coefficient that can be applied to community-based trials have been developed for a continuous outcome variable, fewer methods exist for a binary outcome variable. The aim of this study is to evaluate confidence interval methods for the intraclass correlation coefficient applied to binary outcomes in community intervention trials enrolling a small number of large clusters. Existing methods for confidence interval construction are examined and compared to a new ad hoc approach based on dividing clusters into a large number of smaller sub-clusters and subsequently applying existing methods to the resulting data. Monte Carlo simulation is used to assess the width and coverage of confidence intervals for the intraclass correlation coefficient based on Smith's large sample approximation of the standard error of the one-way analysis of variance estimator, an inverted modified Wald test for the Fleiss-Cuzick estimator, and intervals constructed using a bootstrap-t applied to a variance-stabilizing transformation of the intraclass correlation coefficient estimate. In addition, a new approach is applied in which clusters are randomly divided into a large number of smaller sub-clusters with the same methods applied to these data (with the exception of the bootstrap-t interval, which assumes large cluster sizes). These methods are also applied to a cluster randomized trial on adolescent tobacco use for illustration. When applied to a binary outcome variable in a small number of large clusters, existing confidence interval methods for the intraclass correlation coefficient provide poor coverage. However, confidence intervals constructed using the new approach combined with Smith

Neutron generation time of the reactor 'crocus' by an interval distribution method for counts collected by two detectors

International Nuclear Information System (INIS)

Haldy, P.-A.; Chikouche, M.

1975-01-01

The distribution is considered of time intervals between a count in one neutron detector and the consequent event registered in a second one. A 'four interval' probability generating function was derived by means of which the expression for the distribution of the time intervals, lasting from triggering detection in the first detector to subsequent count in the second, one could be obtained. The experimental work was conducted in the zero thermal power reactor Crocus, using a neutron source provided by spontaneous fission, a BF 3 counter for the first detector and an He 3 detector for the second instrument. (U.K.)

Semiparametric regression analysis of interval-censored competing risks data.

Science.gov (United States)

Mao, Lu; Lin, Dan-Yu; Zeng, Donglin

2017-09-01

Interval-censored competing risks data arise when each study subject may experience an event or failure from one of several causes and the failure time is not observed directly but rather is known to lie in an interval between two examinations. We formulate the effects of possibly time-varying (external) covariates on the cumulative incidence or sub-distribution function of competing risks (i.e., the marginal probability of failure from a specific cause) through a broad class of semiparametric regression models that captures both proportional and non-proportional hazards structures for the sub-distribution. We allow each subject to have an arbitrary number of examinations and accommodate missing information on the cause of failure. We consider nonparametric maximum likelihood estimation and devise a fast and stable EM-type algorithm for its computation. We then establish the consistency, asymptotic normality, and semiparametric efficiency of the resulting estimators for the regression parameters by appealing to modern empirical process theory. In addition, we show through extensive simulation studies that the proposed methods perform well in realistic situations. Finally, we provide an application to a study on HIV-1 infection with different viral subtypes. © 2017, The International Biometric Society.

Verified Interval Orbit Propagation in Satellite Collision Avoidance

NARCIS (Netherlands)

Römgens, B.A.; Mooij, E.; Naeije, M.C.

2011-01-01

Verified interval integration methods enclose a solution set corresponding to interval initial values and parameters, and bound integration and rounding errors. Verified methods suffer from overestimation of the solution, i.e., non-solutions are also included in the solution enclosure. Two verified

Extended score interval in the assessment of basic surgical skills.

Science.gov (United States)

Acosta, Stefan; Sevonius, Dan; Beckman, Anders

2015-01-01

The Basic Surgical Skills course uses an assessment score interval of 0-3. An extended score interval, 1-6, was proposed by the Swedish steering committee of the course. The aim of this study was to analyze the trainee scores in the current 0-3 scored version compared to a proposed 1-6 scored version. Sixteen participants, seven females and nine males, were evaluated in the current and proposed assessment forms by instructors, observers, and learners themselves during the first and second day. In each assessment form, 17 tasks were assessed. The inter-rater reliability between the current and the proposed score sheets were evaluated with intraclass correlation (ICC) with 95% confidence intervals (CI). The distribution of scores for 'knot tying' at the last time point and 'bowel anastomosis side to side' given by the instructors in the current assessment form showed that the highest score was given in 31 and 62%, respectively. No ceiling effects were found in the proposed assessment form. The overall ICC between the current and proposed score sheets after assessment by the instructors increased from 0.38 (95% CI 0.77-0.78) on Day 1 to 0.83 (95% CI 0.51-0.94) on Day 2. A clear ceiling effect of scores was demonstrated in the current assessment form, questioning its validity. The proposed score sheet provides more accurate scores and seems to be a better feedback instrument for learning technical surgical skills in the Basic Surgical Skills course.

Effect size, confidence intervals and statistical power in psychological research.

Directory of Open Access Journals (Sweden)

Téllez A.

2015-07-01

Full Text Available Quantitative psychological research is focused on detecting the occurrence of certain population phenomena by analyzing data from a sample, and statistics is a particularly helpful mathematical tool that is used by researchers to evaluate hypotheses and make decisions to accept or reject such hypotheses. In this paper, the various statistical tools in psychological research are reviewed. The limitations of null hypothesis significance testing (NHST and the advantages of using effect size and its respective confidence intervals are explained, as the latter two measurements can provide important information about the results of a study. These measurements also can facilitate data interpretation and easily detect trivial effects, enabling researchers to make decisions in a more clinically relevant fashion. Moreover, it is recommended to establish an appropriate sample size by calculating the optimum statistical power at the moment that the research is designed. Psychological journal editors are encouraged to follow APA recommendations strictly and ask authors of original research studies to report the effect size, its confidence intervals, statistical power and, when required, any measure of clinical significance. Additionally, we must account for the teaching of statistics at the graduate level. At that level, students do not receive sufficient information concerning the importance of using different types of effect sizes and their confidence intervals according to the different types of research designs; instead, most of the information is focused on the various tools of NHST.

COMPARATIVE STUDY OF EARLY POSTPARTUM IUCD INSERTION TO INTERVAL IUCD INSERTION

Directory of Open Access Journals (Sweden)

Shibani Devi

2016-07-01

Full Text Available INTRODUCTION According to National Family Health Survey-3, Indian women have 13% unmet need for contraception and according to District Level Household & Facility Survey-3, it is 21.3% in the postpartum period. Postpartum intrauterine contraceptive device insertion - both immediately post-placental delivery and somewhat later, but within 48 hours after delivery are options which merit consideration as the woman is likely to have a high motivation for accepting contraception and the healthcare centre provides a convenient setting for insertion of IUCD. AIM Comparison of efficacy and complications of IUCD insertions in post-placental with interval period: 6-month followup. METHOD This perspective study was conducted among 100 women: - 50 women had IUCD inserted within 10 minutes of placental delivery and 50 had insertion more than 6 weeks after delivery. They were followed till 6 months post insertion and were compared regarding early and late complications, continuation rates and expulsion rates. RESULT At the end of six months, we found higher occurrence of lower abdominal pain, heavy menstrual bleeding in case of interval insertion as compared to post-placental insertion which was statistically significant (p value-0.04 & 0.007 respectively. However, the expulsion rates of post-placental IUCD were somewhat elevated (14% compared to interval insertions (2%. Continuation rates at the end of 6 months in both the groups were 82% and 86% respectively which is comparable. CONCLUSION Post-placental IUCD is thus found to be an ideal method to meet the unmet need of postpartum women as it is easily accessible and convenient for both women and their health care providers, is associated with less discomfort and fewer side effects and allow women to obtain safe, long acting, highly effective contraception while still in the health care system.

Five-year risk of interval-invasive second breast cancer.

Science.gov (United States)

Lee, Janie M; Buist, Diana S M; Houssami, Nehmat; Dowling, Emily C; Halpern, Elkan F; Gazelle, G Scott; Lehman, Constance D; Henderson, Louise M; Hubbard, Rebecca A

2015-07-01

Earlier detection of second breast cancers after primary breast cancer (PBC) treatment improves survival, yet mammography is less accurate in women with prior breast cancer. The purpose of this study was to examine women presenting clinically with second breast cancers after negative surveillance mammography (interval cancers), and to estimate the five-year risk of interval-invasive second cancers for women with varying risk profiles. We evaluated a prospective cohort of 15 114 women with 47 717 surveillance mammograms diagnosed with stage 0-II unilateral PBC from 1996 through 2008 at facilities in the Breast Cancer Surveillance Consortium. We used discrete time survival models to estimate the association between odds of an interval-invasive second breast cancer and candidate predictors, including demographic, PBC, and imaging characteristics. All statistical tests were two-sided. The cumulative incidence of second breast cancers after five years was 54.4 per 1000 women, with 325 surveillance-detected and 138 interval-invasive second breast cancers. The five-year risk of interval-invasive second cancer for women with referent category characteristics was 0.60%. For women with the most and least favorable profiles, the five-year risk ranged from 0.07% to 6.11%. Multivariable modeling identified grade II PBC (odds ratio [OR] = 1.95, 95% confidence interval [CI] = 1.15 to 3.31), treatment with lumpectomy without radiation (OR = 3.27, 95% CI = 1.91 to 5.62), interval PBC presentation (OR = 2.01, 95% CI 1.28 to 3.16), and heterogeneously dense breasts on mammography (OR = 1.54, 95% CI = 1.01 to 2.36) as independent predictors of interval-invasive second breast cancers. PBC diagnosis and treatment characteristics contribute to variation in subsequent-interval second breast cancer risk. Consideration of these factors may be useful in developing tailored post-treatment imaging surveillance plans. © The Author 2015. Published by Oxford University Press. All rights reserved

The interblink interval in normal and dry eye subjects

Directory of Open Access Journals (Sweden)

Johnston PR

2013-02-01

parameters on a larger scale study in subjects with dry eye and other ocular surface disorders.Keywords: dry eye, interblink intervals, visual function, visual tasks, diagnostic model

Study on risk insight for additional ILRT interval extension

International Nuclear Information System (INIS)

Seo, M. R.; Hong, S. Y.; Kim, M. K.; Chung, B. S.; Oh, H. C.

2005-01-01

In U.S., the containment Integrated Leakage Rate Test (ILRT) interval was extended from 3 times per 10 years to once per 10 years based on NUREG-1493 'Performance-Based Containment Leak-Test Program' in 1995. In September, 2001, ILRT interval was extended up to once per 15 years based on Nuclear Energy Industry (NEI) provisional guidance 'Interim Guidance for Performing Risk Impact Assessments In Support of One-Time Extensions for Containment Integrated Leakage Rate Test Surveillance Intervals'. In Korea, the containment ILRT was performed with 5 year interval. But, in MOST(Ministry of Science and Technology) Notice 2004-15 'Standard for the Leak- Rate Test of the Nuclear Reactor Containment', the extension of the ILRT interval to once per 10 year can be allowed if some conditions are met. So, the safety analysis for the extension of Yonggwang Nuclear (YGN) Unit 1 and 2 ILRT interval extension to once per 10 years was completed based on the methodology in NUREG-1493. But, during review process by regulatory body, KINS, it was required that some various risk insight or index for risk analysis should be developed. So, we began to study NEI interim report for 15 year ILRT interval extension. As previous analysis based on NUREG-1493, MACCS II (MELCOR Accident Consequence Code System) computer code was used for the risk analysis of the population, and the population dose was selected as a reference index for the risk evaluation

DEVELOPMENT MANAGEMENT TRANSFER PRICING BY APPLICATION OF THE INTERVAL ESTIMATES

Directory of Open Access Journals (Sweden)

Elena B. Shuvalova

2013-01-01

Full Text Available The article discusses the application of the method of interval estimation of conformity of the transaction price the market price. A comparative analysis of interval and point estimate. Identified the positive and negative effects of using interval estimation.

Ratio-based lengths of intervals to improve fuzzy time series forecasting.

Science.gov (United States)

Huarng, Kunhuang; Yu, Tiffany Hui-Kuang

2006-04-01

The objective of this study is to explore ways of determining the useful lengths of intervals in fuzzy time series. It is suggested that ratios, instead of equal lengths of intervals, can more properly represent the intervals among observations. Ratio-based lengths of intervals are, therefore, proposed to improve fuzzy time series forecasting. Algebraic growth data, such as enrollments and the stock index, and exponential growth data, such as inventory demand, are chosen as the forecasting targets, before forecasting based on the various lengths of intervals is performed. Furthermore, sensitivity analyses are also carried out for various percentiles. The ratio-based lengths of intervals are found to outperform the effective lengths of intervals, as well as the arbitrary ones in regard to the different statistical measures. The empirical analysis suggests that the ratio-based lengths of intervals can also be used to improve fuzzy time series forecasting.

An Integrated Method for Interval Multi-Objective Planning of a Water Resource System in the Eastern Part of Handan

Directory of Open Access Journals (Sweden)

Meiqin Suo

2017-07-01

Full Text Available In this study, an integrated solving method is proposed for interval multi-objective planning. The proposed method is based on fuzzy linear programming and an interactive two-step method. It cannot only provide objectively optimal values for multiple objectives at the same time, but also effectively offer a globally optimal interval solution. Meanwhile, the degree of satisfaction related to different objective functions would be obtained. Then, the integrated solving method for interval multi-objective planning is applied to a case study of planning multi-water resources joint scheduling under uncertainty in the eastern part of Handan, China. The solutions obtained are useful for decision makers in easing the contradiction between supply of multi-water resources and demand from different water users. Moreover, it can provide the optimal comprehensive benefits of economy, society, and the environment.

[Nonparametric method of estimating survival functions containing right-censored and interval-censored data].

Science.gov (United States)

Xu, Yonghong; Gao, Xiaohuan; Wang, Zhengxi

2014-04-01

Missing data represent a general problem in many scientific fields, especially in medical survival analysis. Dealing with censored data, interpolation method is one of important methods. However, most of the interpolation methods replace the censored data with the exact data, which will distort the real distribution of the censored data and reduce the probability of the real data falling into the interpolation data. In order to solve this problem, we in this paper propose a nonparametric method of estimating the survival function of right-censored and interval-censored data and compare its performance to SC (self-consistent) algorithm. Comparing to the average interpolation and the nearest neighbor interpolation method, the proposed method in this paper replaces the right-censored data with the interval-censored data, and greatly improves the probability of the real data falling into imputation interval. Then it bases on the empirical distribution theory to estimate the survival function of right-censored and interval-censored data. The results of numerical examples and a real breast cancer data set demonstrated that the proposed method had higher accuracy and better robustness for the different proportion of the censored data. This paper provides a good method to compare the clinical treatments performance with estimation of the survival data of the patients. This pro vides some help to the medical survival data analysis.

Inter-pregnancy interval and pregnancy outcomes among HIV ...

African Journals Online (AJOL)

owner

Abstract Background: Both short and long inter-pregnancy intervals have been associated with higher risk of adverse pregnancy outcomes. More so, short inter- pregnancy interval among HIV- positive women implies higher birth rate and subsequently a higher number of neonates exposed to HIV and potentially at.

Propositional interval neighborhood logics: Expressiveness, decidability, and undecidable extensions

DEFF Research Database (Denmark)

Bresolin, Davide; Goranko, Valentin; Montanari, Angelo

2009-01-01

In this paper, we investigate the expressiveness of the variety of propositional interval neighborhood logics (PNL), we establish their decidability on linearly ordered domains and some important subclasses, and we prove the undecidability of a number of extensions of PNL with additional modalities...... over interval relations. All together, we show that PNL form a quite expressive and nearly maximal decidable fragment of Halpern–Shoham’s interval logic HS....

Dead-time corrections on long-interval measurements of short-lived activities

International Nuclear Information System (INIS)

Irfan, M.

1977-01-01

A method has been proposed to make correction for counting losses due to dead time where the counting interval is comparable to or larger than the half-life of the activity under investigation. Counts due to background and any long-lived activity present in the source have been taken into consideration. The method is, under certain circumstances, capable of providing a valuable check on the accuracy of the dead time of the counting system. (Auth.)

Geometric computations with interval and new robust methods applications in computer graphics, GIS and computational geometry

CERN Document Server

Ratschek, H

2003-01-01

This undergraduate and postgraduate text will familiarise readers with interval arithmetic and related tools to gain reliable and validated results and logically correct decisions for a variety of geometric computations plus the means for alleviating the effects of the errors. It also considers computations on geometric point-sets, which are neither robust nor reliable in processing with standard methods. The authors provide two effective tools for obtaining correct results: (a) interval arithmetic, and (b) ESSA the new powerful algorithm which improves many geometric computations and makes th

Petrophysics of shale intervals in the Skjold Field, Danish North Sea

DEFF Research Database (Denmark)

Mbia, Ernest Ncha; Fabricius, Ida Lykke; Oji, C. O.

2011-01-01

interval 6 is mainly shale. X-ray diffraction analysis reveals the dominance of inter-layered smectite/illite in interval 1–3 and upper part of interval 4, whereas illite dominates interval 5 and 6. Other minerals include kaolinite, chlorite, quartz, calcite, Opal-CT, dolomite and plagioclase...

A consensus model for group decision making under interval type-2 fuzzy environment

Institute of Scientific and Technical Information of China (English)

Xiao-xiong ZHANG; Bing-feng GE; Yue-jin TAN

2016-01-01

We propose a new consensus model for group decision making (GDM) problems, using an interval type-2 fuzzy environment. In our model, experts are asked to express their preferences using linguistic terms characterized by interval type-2 fuzzy sets (IT2 FSs), because these can provide decision makers with greater freedom to express the vagueness in real-life situa-tions. Consensus and proximity measures based on the arithmetic operations of IT2 FSs are used simultaneously to guide the decision-making process. The majority of previous studies have taken into account only the importance of the experts in the aggregation process, which may give unreasonable results. Thus, we propose a new feedback mechanism that generates different advice strategies for experts according to their levels of importance. In general, experts with a lower level of importance require a larger number of suggestions to change their initial preferences. Finally, we investigate a numerical example and execute com-parable models and ours, to demonstrate the performance of our proposed model. The results indicate that the proposed model provides greater insight into the GDM process.

Interval-Valued Hesitant Fuzzy Multiattribute Group Decision Making Based on Improved Hamacher Aggregation Operators and Continuous Entropy

Directory of Open Access Journals (Sweden)

Jun Liu

2017-01-01

Full Text Available Under the interval-valued hesitant fuzzy information environment, we investigate a multiattribute group decision making (MAGDM method with continuous entropy weights and improved Hamacher information aggregation operators. Firstly, we introduce the axiomatic definition of entropy for interval-valued hesitant fuzzy elements (IVHFEs and construct a continuous entropy formula on the basis of the continuous ordered weighted averaging (COWA operator. Then, based on the Hamacher t-norm and t-conorm, the adjusted operational laws for IVHFEs are defined. In order to aggregate interval-valued hesitant fuzzy information, some new improved interval-valued hesitant fuzzy Hamacher aggregation operators are investigated, including the improved interval-valued hesitant fuzzy Hamacher ordered weighted averaging (I-IVHFHOWA operator and the improved interval-valued hesitant fuzzy Hamacher ordered weighted geometric (I-IVHFHOWG operator, the desirable properties of which are discussed. In addition, the relationship among these proposed operators is analyzed in detail. Applying the continuous entropy and the proposed operators, an approach to MAGDM is developed. Finally, a numerical example for emergency operating center (EOC selection is provided, and comparative analyses with existing methods are performed to demonstrate that the proposed approach is both valid and practical to deal with group decision making problems.

Change in Breast Cancer Screening Intervals Since the 2009 USPSTF Guideline.

Science.gov (United States)

Wernli, Karen J; Arao, Robert F; Hubbard, Rebecca A; Sprague, Brian L; Alford-Teaster, Jennifer; Haas, Jennifer S; Henderson, Louise; Hill, Deidre; Lee, Christoph I; Tosteson, Anna N A; Onega, Tracy

2017-08-01

In 2009, the U.S. Preventive Services Task Force (USPSTF) recommended biennial mammography for women aged 50-74 years and shared decision-making for women aged 40-49 years for breast cancer screening. We evaluated changes in mammography screening interval after the 2009 recommendations. We conducted a prospective cohort study of women aged 40-74 years who received 821,052 screening mammograms between 2006 and 2012 using data from the Breast Cancer Surveillance Consortium. We compared changes in screening intervals and stratified intervals based on whether the mammogram at the end of the interval occurred before or after the 2009 recommendation. Differences in mean interval length by woman-level characteristics were compared using linear regression. The mean interval (in months) minimally decreased after the 2009 USPSTF recommendations. Among women aged 40-49 years, the mean interval decreased from 17.2 months to 17.1 months (difference -0.16%, 95% confidence interval [CI] -0.30 to -0.01). Similar small reductions were seen for most age groups. The largest change in interval length in the post-USPSTF period was declines among women with a first-degree family history of breast cancer (difference -0.68%, 95% CI -0.82 to -0.54) or a 5-year breast cancer risk ≥2.5% (difference -0.58%, 95% CI -0.73 to -0.44). The 2009 USPSTF recommendation did not lengthen the average mammography interval among women routinely participating in mammography screening. Future studies should evaluate whether breast cancer screening intervals lengthen toward biennial intervals following new national 2016 breast cancer screening recommendations, particularly among women less than 50 years of age.

[Association between oxytocin augmentation intervals and the risk of postpartum haemorrhage].

Science.gov (United States)

Loscul, C; Chantry, A-A; Caubit, L; Deneux-Tharaux, C; Goffinet, F; Le Ray, C

2016-09-01

To study the association between the duration of oxytocin augmentation intervals and the risk of postpartum haemorrhage (PPH) among primiparous women in spontaneous labour. Retrospective cohort including primiparous women in spontaneous labour who received oxytocin during labour (n=454). Oxytocin augmentation intervals were dichotomized in intervalsoxytocin augmentation intervals. The association between oxytocin augmentation intervals and PPH was analyzed using univariate and multivariate analysis. Oxytocin augmentation intervals were shorter than 20minutes for 43.8% of the study population. The rate of PPH was higher (9.1% vs 3.5%; P=0.014), and the use of sulprostone was more frequent (6.5% vs 3.5%; P=0.013) if oxytocin augmentation intervals were shorter than 20minutes in comparison with intervals≥20minutes. The association between oxytocin augmentation intervals and PPH remains significant after adjustment on other PPH risk factors (adjusted OR=3.48, 95% CI [1.45-8.34]). The rate of adverse neonatal issue, defined by arterial pH at birth≤7.10 and/or 5minutes score d'Apgar≤7, was higher if oxytocin augmentation intervals wereoxytocin with augmentation intervals shorter than 20minutes. Copyright © 2016. Published by Elsevier Masson SAS.

Fast and Exact Fiber Surfaces for Tetrahedral Meshes.

Science.gov (United States)

Klacansky, Pavol; Tierny, Julien; Carr, Hamish; Zhao Geng

2017-07-01

Isosurfaces are fundamental geometrical objects for the analysis and visualization of volumetric scalar fields. Recent work has generalized them to bivariate volumetric fields with fiber surfaces, the pre-image of polygons in range space. However, the existing algorithm for their computation is approximate, and is limited to closed polygons. Moreover, its runtime performance does not allow instantaneous updates of the fiber surfaces upon user edits of the polygons. Overall, these limitations prevent a reliable and interactive exploration of the space of fiber surfaces. This paper introduces the first algorithm for the exact computation of fiber surfaces in tetrahedral meshes. It assumes no restriction on the topology of the input polygon, handles degenerate cases and better captures sharp features induced by polygon bends. The algorithm also allows visualization of individual fibers on the output surface, better illustrating their relationship with data features in range space. To enable truly interactive exploration sessions, we further improve the runtime performance of this algorithm. In particular, we show that it is trivially parallelizable and that it scales nearly linearly with the number of cores. Further, we study acceleration data-structures both in geometrical domain and range space and we show how to generalize interval trees used in isosurface extraction to fiber surface extraction. Experiments demonstrate the superiority of our algorithm over previous work, both in terms of accuracy and running time, with up to two orders of magnitude speedups. This improvement enables interactive edits of range polygons with instantaneous updates of the fiber surface for exploration purpose. A VTK-based reference implementation is provided as additional material to reproduce our results.

Heritability of Tpeak-Tend Interval and T-wave Amplitude: A Twin Study

DEFF Research Database (Denmark)

Haarmark, Christian; Kyvik, Kirsten O; Vedel-Larsen, Esben

2011-01-01

BACKGROUND: -Tpeak-Tend interval (TpTe) and T-wave amplitude (Tamp) carry diagnostic and prognostic information regarding cardiac morbidity and mortality. Heart rate and QT interval are known to be heritable traits. The heritability of T-wave morphology parameters such as TpTe and Tamp is unknown...... interval, QTpeak and QTend interval) were measured and averaged over three consecutive beats in lead V5. TpTe was calculated as the QTend and QTpeak interval difference. Heritability was assessed using structural equation models adjusting for age, gender and BMI. All models were reducible to a model...... of additive genetics and unique environment. All variables had considerable genetic components. Adjusted heritability estimates were: TpTe 46%, Tamp lead V1 34%, Tamp lead V5 47%, RR interval 55%, QT interval 67% and QTcB 42%. CONCLUSIONS: -RR interval, QT-interval, T-wave amplitude and Tpeak-Tend interval...

Assessing QT interval prolongation and its associated risks with antipsychotics

DEFF Research Database (Denmark)

Nielsen, Jimmi; Graff, Claus; Kanters, Jørgen K.

2011-01-01

markers for TdP have been developed but none of them is clinically implemented yet and QT interval prolongation is still considered the most valid surrogate marker. Although automated QT interval determination may offer some assistance, QT interval determination is best performed by a cardiologist skilled...

Interval matrices: Regularity generates singularity

Czech Academy of Sciences Publication Activity Database

Rohn, Jiří; Shary, S.P.

2018-01-01

Roč. 540, 1 March (2018), s. 149-159 ISSN 0024-3795 Institutional support: RVO:67985807 Keywords : interval matrix * regularity * singularity * P-matrix * absolute value equation * diagonally singilarizable matrix Subject RIV: BA - General Mathematics Impact factor: 0.973, year: 2016

Chaotic dynamics from interspike intervals

DEFF Research Database (Denmark)

Pavlov, A N; Sosnovtseva, Olga; Mosekilde, Erik

2001-01-01

Considering two different mathematical models describing chaotic spiking phenomena, namely, an integrate-and-fire and a threshold-crossing model, we discuss the problem of extracting dynamics from interspike intervals (ISIs) and show that the possibilities of computing the largest Lyapunov expone...

Determining optimal preventive maintenance interval for component of Well Barrier Element in an Oil & Gas Company

Science.gov (United States)

Siswanto, A.; Kurniati, N.

2018-04-01

An oil and gas company has 2,268 oil and gas wells. Well Barrier Element (WBE) is installed in a well to protect human, prevent asset damage and minimize harm to the environment. The primary WBE component is Surface Controlled Subsurface Safety Valve (SCSSV). The secondary WBE component is Christmas Tree Valves that consist of four valves i.e. Lower Master Valve (LMV), Upper Master Valve (UMV), Swab Valve (SV) and Wing Valve (WV). Current practice on WBE Preventive Maintenance (PM) program is conducted by considering the suggested schedule as stated on manual. Corrective Maintenance (CM) program is conducted when the component fails unexpectedly. Both PM and CM need cost and may cause production loss. This paper attempts to analyze the failure data and reliability based on historical data. Optimal PM interval is determined in order to minimize the total cost of maintenance per unit time. The optimal PM interval for SCSSV is 730 days, LMV is 985 days, UMV is 910 days, SV is 900 days and WV is 780 days. In average of all components, the cost reduction by implementing the suggested interval is 52%, while the reliability is improved by 4% and the availability is increased by 5%.

Growth Estimators and Confidence Intervals for the Mean of Negative Binomial Random Variables with Unknown Dispersion

Directory of Open Access Journals (Sweden)

David Shilane

2013-01-01

Full Text Available The negative binomial distribution becomes highly skewed under extreme dispersion. Even at moderately large sample sizes, the sample mean exhibits a heavy right tail. The standard normal approximation often does not provide adequate inferences about the data's expected value in this setting. In previous work, we have examined alternative methods of generating confidence intervals for the expected value. These methods were based upon Gamma and Chi Square approximations or tail probability bounds such as Bernstein's inequality. We now propose growth estimators of the negative binomial mean. Under high dispersion, zero values are likely to be overrepresented in the data. A growth estimator constructs a normal-style confidence interval by effectively removing a small, predetermined number of zeros from the data. We propose growth estimators based upon multiplicative adjustments of the sample mean and direct removal of zeros from the sample. These methods do not require estimating the nuisance dispersion parameter. We will demonstrate that the growth estimators' confidence intervals provide improved coverage over a wide range of parameter values and asymptotically converge to the sample mean. Interestingly, the proposed methods succeed despite adding both bias and variance to the normal approximation.

A Method to Identify Flight Obstacles on Digital Surface Model

Institute of Scientific and Technical Information of China (English)

ZHAO Min; LIN Xinggang; SUN Shouyu; WANG Youzhi

2005-01-01

In modern low-altitude terrain-following guidance, a constructing method of the digital surface model (DSM) is presented in the paper to reduce the threat to flying vehicles of tall surface features for safe flight. The relationship between an isolated obstacle size and the intervals of vertical- and cross-section in the DSM model is established. The definition and classification of isolated obstacles are proposed, and a method for determining such isolated obstacles in the DSM model is given. The simulation of a typical urban district shows that when the vertical- and cross-section DSM intervals are between 3 m and 25 m, the threat to terrain-following flight at low-altitude is reduced greatly, and the amount of data required by the DSM model for monitoring in real time a flying vehicle is also smaller. Experiments show that the optimal results are for an interval of 12.5 m in the vertical- and cross-sections in the DSM model, with a 1:10 000 DSM scale grade.

An Interval Bound Algorithm of optimizing reactor core loading pattern by using reactivity interval schema

International Nuclear Information System (INIS)

Gong Zhaohu; Wang Kan; Yao Dong

2011-01-01

Highlights: → We present a new Loading Pattern Optimization method - Interval Bound Algorithm (IBA). → IBA directly uses the reactivity of fuel assemblies and burnable poison. → IBA can optimize fuel assembly orientation in a coupled way. → Numerical experiment shows that IBA outperforms genetic algorithm and engineers. → We devise DDWF technique to deal with multiple objectives and constraints. - Abstract: In order to optimize the core loading pattern in Nuclear Power Plants, the paper presents a new optimization method - Interval Bound Algorithm (IBA). Similar to the typical population based algorithms, e.g. genetic algorithm, IBA maintains a population of solutions and evolves them during the optimization process. IBA acquires the solution by statistical learning and sampling the control variable intervals of the population in each iteration. The control variables are the transforms of the reactivity of fuel assemblies or the worth of burnable poisons, which are the crucial heuristic information for loading pattern optimization problems. IBA can deal with the relationship between the dependent variables by defining the control variables. Based on the IBA algorithm, a parallel Loading Pattern Optimization code, named IBALPO, has been developed. To deal with multiple objectives and constraints, the Dynamic Discontinuous Weight Factors (DDWF) for the fitness function have been used in IBALPO. Finally, the code system has been used to solve a realistic reloading problem and a better pattern has been obtained compared with the ones searched by engineers and genetic algorithm, thus the performance of the code is proved.

Internal representations of temporal statistics and feedback calibrate motor-sensory interval timing.

Directory of Open Access Journals (Sweden)

Luigi Acerbi

Full Text Available Humans have been shown to adapt to the temporal statistics of timing tasks so as to optimize the accuracy of their responses, in agreement with the predictions of Bayesian integration. This suggests that they build an internal representation of both the experimentally imposed distribution of time intervals (the prior and of the error (the loss function. The responses of a Bayesian ideal observer depend crucially on these internal representations, which have only been previously studied for simple distributions. To study the nature of these representations we asked subjects to reproduce time intervals drawn from underlying temporal distributions of varying complexity, from uniform to highly skewed or bimodal while also varying the error mapping that determined the performance feedback. Interval reproduction times were affected by both the distribution and feedback, in good agreement with a performance-optimizing Bayesian observer and actor model. Bayesian model comparison highlighted that subjects were integrating the provided feedback and represented the experimental distribution with a smoothed approximation. A nonparametric reconstruction of the subjective priors from the data shows that they are generally in agreement with the true distributions up to third-order moments, but with systematically heavier tails. In particular, higher-order statistical features (kurtosis, multimodality seem much harder to acquire. Our findings suggest that humans have only minor constraints on learning lower-order statistical properties of unimodal (including peaked and skewed distributions of time intervals under the guidance of corrective feedback, and that their behavior is well explained by Bayesian decision theory.

Mapping Precipitation Patterns from the Stable Isotopic Composition of Surface Waters: Olympic Peninsula, Washington State

Science.gov (United States)

Anders, A. M.; Brandon, M. T.

2008-12-01

Available data indicate that large and persistent precipitation gradients are tied to topography at scales down to a few kilometers, but precipitation patterns in the majority of mountain ranges are poorly constrained at scales less than tens of kilometers. A lack of knowledge of precipitation patterns hampers efforts to understand the processes of orographic precipitation and identify the relationships between geomorphic evolution and climate. A new method for mapping precipitation using the stable isotopic composition of surface waters is tested in the Olympic Mountains of Washington State. Measured δD and δ18O of 97 samples of surface water are linearly related and nearly inseparable from the global meteoric water line. A linear orographic precipitation model extended to include in effects of isotopic fractionation via Rayleigh distillation predicts precipitation patterns and isotopic composition of surface water. Seven parameters relating to the climate and isotopic composition of source water are used. A constrained random search identifies the best-fitting parameter set. Confidence intervals for parameter values are defined and precipitation patterns are determined. Average errors for the best-fitting model are 4.8 permil in δD. The difference between the best fitting model and other models within the 95% confidence interval was less than 20%. An independent high-resolution precipitation climatology documents precipitation gradients similar in shape and magnitude to the model derived from surface water isotopic composition. This technique could be extended to other mountain ranges, providing an economical and fast assessment of precipitation patterns requiring minimal field work.

Interval-Censored Time-to-Event Data Methods and Applications

CERN Document Server

Chen, Ding-Geng

2012-01-01

Interval-Censored Time-to-Event Data: Methods and Applications collects the most recent techniques, models, and computational tools for interval-censored time-to-event data. Top biostatisticians from academia, biopharmaceutical industries, and government agencies discuss how these advances are impacting clinical trials and biomedical research. Divided into three parts, the book begins with an overview of interval-censored data modeling, including nonparametric estimation, survival functions, regression analysis, multivariate data analysis, competing risks analysis, and other models for interva

Interval timing in genetically modified mice: a simple paradigm

OpenAIRE

Balci, F.; Papachristos, E. B.; Gallistel, C. R.; Brunner, D.; Gibson, J.; Shumyatsky, G. P.

2007-01-01

We describe a behavioral screen for the quantitative study of interval timing and interval memory in mice. Mice learn to switch from a short-latency feeding station to a long-latency station when the short latency has passed without a feeding. The psychometric function is the cumulative distribution of switch latencies. Its median measures timing accuracy and its interquartile interval measures timing precision. Next, using this behavioral paradigm, we have examined mice with a gene knockout ...

Reference intervals and longitudinal changes in copeptin and MR-proADM concentrations during pregnancy.

Science.gov (United States)

Joosen, Annemiek M C P; van der Linden, Ivon J M; Schrauwen, Lianne; Theeuwes, Alisia; de Groot, Monique J M; Ermens, Antonius A M

2017-11-27

Vasopressin and adrenomedullin and their stable by-products copeptin and midregional part of proadrenomedullin (MR-proADM) are promising biomarkers for the development of preeclampsia. However, clinical use is hampered by the lack of trimester-specific reference intervals. We therefore estimated reference intervals for copeptin and MR-proADM in disease-free Dutch women throughout pregnancy. Apparently healthy low risk pregnant women were recruited. Exclusion criteria included current or past history of endocrine disease, multiple pregnancy, use of medication known to influence thyroid function and current pregnancy as a result of hormonal stimulation. Women who miscarried, developed hyperemesis gravidarum, hypertension, pre-eclampsia, hemolysis elevated liver enzymes and low platelets, diabetes or other disease, delivered prematurely or had a small for gestational age neonate were excluded from analyses. Blood samples were collected at 9-13 weeks (n=98), 27-29 weeks (n=94) and 36-39 weeks (n=91) of gestation and at 4-13 weeks post-partum (PP) (n=89). Sixty-two women had complete data during pregnancy and PP. All analyses were performed on a Kryptor compact plus. Copeptin increases during pregnancy, but 97.5th percentiles remain below the non-pregnant upper reference limit (URL) provided by the manufacturer. MR-proADM concentrations increase as well during pregnancy. In trimesters 2 and 3 the 97.5th percentiles are over three times the non-pregnant URL provided by the manufacturer. Trimester- and assay-specific reference intervals for copeptin and MR-proADM should be used. In addition, consecutive measurements and the time frame between measurements should be considered as the differences seen with or in advance of preeclampsia can be expected to be relatively small compared to the reference intervals.

Electric power demand forecasting using interval time series. A comparison between VAR and iMLP

International Nuclear Information System (INIS)

Garcia-Ascanio, Carolina; Mate, Carlos

2010-01-01

Electric power demand forecasts play an essential role in the electric industry, as they provide the basis for making decisions in power system planning and operation. A great variety of mathematical methods have been used for demand forecasting. The development and improvement of appropriate mathematical tools will lead to more accurate demand forecasting techniques. In order to forecast the monthly electric power demand per hour in Spain for 2 years, this paper presents a comparison between a new forecasting approach considering vector autoregressive (VAR) forecasting models applied to interval time series (ITS) and the iMLP, the multi-layer perceptron model adapted to interval data. In the proposed comparison, for the VAR approach two models are fitted per every hour, one composed of the centre (mid-point) and radius (half-range), and another one of the lower and upper bounds according to the interval representation assumed by the ITS in the learning set. In the case of the iMLP, only the model composed of the centre and radius is fitted. The other interval representation composed of the lower and upper bounds is obtained from the linear combination of the two. This novel approach, obtaining two bivariate models each hour, makes possible to establish, for different periods in the day, which interval representation is more accurate. Furthermore, the comparison between two different techniques adapted to interval time series allows us to determine the efficiency of these models in forecasting electric power demand. It is important to note that the iMLP technique has been selected for the comparison, as it has shown its accuracy in forecasting daily electricity price intervals. This work shows the ITS forecasting methods as a potential tool that will lead to a reduction in risk when making power system planning and operational decisions. (author)

Discussion of “Prediction intervals for short-term wind farm generation forecasts” and “Combined nonparametric prediction intervals for wind power generation”

DEFF Research Database (Denmark)

Pinson, Pierre; Tastu, Julija

2014-01-01

A new score for the evaluation of interval forecasts, the so-called coverage width-based criterion (CWC), was proposed and utilized.. This score has been used for the tuning (in-sample) and genuine evaluation (out-ofsample) of prediction intervals for various applications, e.g., electric load [1......], electricity prices [2], general purpose prediction [3], and wind power generation [4], [5]. Indeed, two papers by the same authors appearing in the IEEE Transactions On Sustainable Energy employ that score and use it to conclude on the comparative quality of alternative approaches to interval forecasting...

The lucid interval associated with epidural bleeding: evolving understanding.

Science.gov (United States)

Ganz, Jeremy C

2013-04-01

The aim of this paper was to elucidate the evolution of our understanding of the term "lucid interval." A number of texts were reviewed to assess their suitability for analysis. The primary requirement was that the text contain detailed descriptions of a series of patients. Details of the clinical course, the findings and timing of surgery, and, when relevant, the time of death and postmortem findings were required. Books written by Henri-François Le Dran, Percival Pott, and James Hill fulfilled these criteria. Surgical findings included the presence and type of fractures, changes in the bone, separation of periosteum, malodorous or purulent material, tense brain, and hematoma. Postmortem findings supplemented and/or complemented the surgical findings. The courses of the patients were then tabulated, and the correlation between different clinical and operative findings was thereby determined. Our understanding of a lucid interval began in the early 18th century with the work of Henri-François Le Dran and Percival Pott in London. They did not, however, demonstrate an interval without symptoms between trauma and deterioration in patients with epidural hematomas (EDHs). The interval they described was longer than usually expected with EDHs and occurred exclusively in patients who had a posttraumatic infection. In 1751, James Hill, from Dumfries, Scotland, described the first hematoma-related lucid interval in a patient with a subdural hematoma. The first case of a lucid interval associated with an EDH was described by John Abernethy. In the 19th century, Jonathan Hutchinson and Walter Jacobson described the interval as it is known today, in cases of EDH. The most recent work on the topic came from studies in Cincinnati and Oslo, where it was demonstrated that bleeding can separate dura mater and that hemorrhage into the epidural space can be shunted out via the veins. This shunting could delay the accumulation of a hematoma and thus the rise in intracranial pressure

Application Of Holographic Interferometry For Investigation Of Microroughness Of Engineering Surfaces

Science.gov (United States)

Lech, Marek; Mruk, Irena; Stupnicki, Jacek

1985-01-01

The paper describes an improved immersion method of holographic interferometry /IMHI/ adjusted for studies of roughness of engineering surfaces. Special optical arrangement, with two types of immersion cells and adequate technique of preparing transparent replicas reproducting with high fidelity details of differently machined surfaces was elaborated. It permits to obtain the contour maps of the surface asperities with intervals between the planes of succesive contour lines within a range of 1 μm. The results obtained for some engineering surfaces are given.

Robust misinterpretation of confidence intervals

NARCIS (Netherlands)

Hoekstra, Rink; Morey, Richard; Rouder, Jeffrey N.; Wagenmakers, Eric-Jan

2014-01-01

Null hypothesis significance testing (NHST) is undoubtedly the most common inferential technique used to justify claims in the social sciences. However, even staunch defenders of NHST agree that its outcomes are often misinterpreted. Confidence intervals (CIs) have frequently been proposed as a more

Procedure prediction from symbolic Electronic Health Records via time intervals analytics.

Science.gov (United States)

Moskovitch, Robert; Polubriaginof, Fernanda; Weiss, Aviram; Ryan, Patrick; Tatonetti, Nicholas

2017-11-01

Prediction of medical events, such as clinical procedures, is essential for preventing disease, understanding disease mechanism, and increasing patient quality of care. Although longitudinal clinical data from Electronic Health Records provides opportunities to develop predictive models, the use of these data faces significant challenges. Primarily, while the data are longitudinal and represent thousands of conceptual events having duration, they are also sparse, complicating the application of traditional analysis approaches. Furthermore, the framework presented here takes advantage of the events duration and gaps. International standards for electronic healthcare data represent data elements, such as procedures, conditions, and drug exposures, using eras, or time intervals. Such eras contain both an event and a duration and enable the application of time intervals mining - a relatively new subfield of data mining. In this study, we present Maitreya, a framework for time intervals analytics in longitudinal clinical data. Maitreya discovers frequent time intervals related patterns (TIRPs), which we use as prognostic markers for modelling clinical events. We introduce three novel TIRP metrics that are normalized versions of the horizontal-support, that represents the number of TIRP instances per patient. We evaluate Maitreya on 28 frequent and clinically important procedures, using the three novel TIRP representation metrics in comparison to no temporal representation and previous TIRPs metrics. We also evaluate the epsilon value that makes Allen's relations more flexible with several settings of 30, 60, 90 and 180days in comparison to the default zero. For twenty-two of these procedures, the use of temporal patterns as predictors was superior to non-temporal features, and the use of the vertically normalized horizontal support metric to represent TIRPs as features was most effective. The use of the epsilon value with thirty days was slightly better than the zero

Inter-pregnancy interval and pregnancy outcomes among HIV ...

African Journals Online (AJOL)

Background: Both short and long inter-pregnancy intervals have been associated with higher risk of adverse pregnancy outcomes. More so, short interpregnancy interval among HIVpositive women implies higher birth rate and subsequently a higher number of neonates exposed to HIV and potentially at r i s k o f mo t h e r ...

Intrapuparial Development of Sarconesia Chlorogaster (Diptera: Calliphoridae) for Postmortem Interval Estimation (PMI).

Science.gov (United States)

Flissak, J C; Moura, M O

2018-02-28

Sarconesia chlorogaster (Wiedemann) (Diptera: Calliphoridae) is an endemic blow fly species of forensic importance in South America, and whose duration of pupal development is about 70% of the total immature development time. Therefore, morphological changes during this stage, if refined, may provide greater accuracy and reliability in the calculation of minimum postmortem interval. Considering the importance of this species, the main objective of this work was to identify and describe temporal intrapuparial morphological changes of S. chlorogaster. The development of S. chlorogaster reared on an artificial diet and at two constant temperatures (20 and 25ºC) was monitored. Every 8 h until the end of the pupal stage, 10 pupae were killed, fixed, and had their external morphology described and photographed. Of the 29 morphological characteristics described, 13 are potentially informative for estimating the age of S. chlorogaster. In general, body shape (presence or absence of tagmatization), general coloration, visible presence of the mouth hook (portion of the mandible), thoracic appendages, change in eye color, and bristle formation are the most useful characteristics for determining specific age. The results presented here make it possible to estimate the postmortem interval of a corpse using intrapuparial morphological characters, expanding one's ability to estimate postmortem interval.

FRET structure with non-radiative acceptor provided by dye-linker-glass surface complex and single-molecule photodynamics by TIRFM-polarized imaging

International Nuclear Information System (INIS)

Tani, Toshiro; Mashimo, Kei; Suzuki, Tetsu; Horiuchi, Hiromi; Oda, Masaru

2008-01-01

We present our recent study of microscopic single-molecule imaging on the artificial complex of tetramethylrhodamine linked with a propyl chain onto silica glass surface, i.e. an asymmetric fluorescence resonance energy transfer (FRET) structure with non-radiative acceptor. In the synthesis of the complex, we used a mixture of two kinds of isomers to introduce rather small photodynamic difference among them. This isomeric structure change will provide more or less a distinctive photophysical change in e.g. non-radiative relaxation rate. Our recent observation at room temperatures, so far, shows that such contributions can be discriminated in the histograms of the fluorescent spot intensities; broad but distinctive multi-components appear. To identify the isomeric difference as a cause of structures, some configurational assumptions are necessary. One such basic prerequisite is that the transition dipoles of the chromophores should be oriented almost parallel to the glass surface. In order to make clear the modeling, we also provide preliminary experiments on the polarization dependence of the imaging under rotating polarization in epi-illumination

Concurrent variable-interval variable-ratio schedules in a dynamic choice environment.

Science.gov (United States)

Bell, Matthew C; Baum, William M

2017-11-01

Most studies of operant choice have focused on presenting subjects with a fixed pair of schedules across many experimental sessions. Using these methods, studies of concurrent variable- interval variable-ratio schedules helped to evaluate theories of choice. More recently, a growing literature has focused on dynamic choice behavior. Those dynamic choice studies have analyzed behavior on a number of different time scales using concurrent variable-interval schedules. Following the dynamic choice approach, the present experiment examined performance on concurrent variable-interval variable-ratio schedules in a rapidly changing environment. Our objectives were to compare performance on concurrent variable-interval variable-ratio schedules with extant data on concurrent variable-interval variable-interval schedules using a dynamic choice procedure and to extend earlier work on concurrent variable-interval variable-ratio schedules. We analyzed performances at different time scales, finding strong similarities between concurrent variable-interval variable-interval and concurrent variable-interval variable- ratio performance within dynamic choice procedures. Time-based measures revealed almost identical performance in the two procedures compared with response-based measures, supporting the view that choice is best understood as time allocation. Performance at the smaller time scale of visits accorded with the tendency seen in earlier research toward developing a pattern of strong preference for and long visits to the richer alternative paired with brief "samples" at the leaner alternative ("fix and sample"). © 2017 Society for the Experimental Analysis of Behavior.

A Neural Network-Based Interval Pattern Matcher

Directory of Open Access Journals (Sweden)

Jing Lu

2015-07-01

Full Text Available One of the most important roles in the machine learning area is to classify, and neural networks are very important classifiers. However, traditional neural networks cannot identify intervals, let alone classify them. To improve their identification ability, we propose a neural network-based interval matcher in our paper. After summarizing the theoretical construction of the model, we take a simple and a practical weather forecasting experiment, which show that the recognizer accuracy reaches 100% and that is promising.

Imaging near-surface heterogeneities by natural migration of backscattered surface waves: Field data test

KAUST Repository

Liu, Zhaolun; AlTheyab, Abdullah; Hanafy, Sherif M.; Schuster, Gerard T.

2017-01-01

We have developed a methodology for detecting the presence of near-surface heterogeneities by naturally migrating backscattered surface waves in controlled-source data. The near-surface heterogeneities must be located within a depth of approximately one-third the dominant wavelength λ of the strong surface-wave arrivals. This natural migration method does not require knowledge of the near-surface phase-velocity distribution because it uses the recorded data to approximate the Green’s functions for migration. Prior to migration, the backscattered data are separated from the original records, and the band-passed filtered data are migrated to give an estimate of the migration image at a depth of approximately one-third λ. Each band-passed data set gives a migration image at a different depth. Results with synthetic data and field data recorded over known faults validate the effectiveness of this method. Migrating the surface waves in recorded 2D and 3D data sets accurately reveals the locations of known faults. The limitation of this method is that it requires a dense array of receivers with a geophone interval less than approximately one-half λ.

Imaging near-surface heterogeneities by natural migration of backscattered surface waves: Field data test

KAUST Repository

Liu, Zhaolun

2017-03-06

We have developed a methodology for detecting the presence of near-surface heterogeneities by naturally migrating backscattered surface waves in controlled-source data. The near-surface heterogeneities must be located within a depth of approximately one-third the dominant wavelength λ of the strong surface-wave arrivals. This natural migration method does not require knowledge of the near-surface phase-velocity distribution because it uses the recorded data to approximate the Green’s functions for migration. Prior to migration, the backscattered data are separated from the original records, and the band-passed filtered data are migrated to give an estimate of the migration image at a depth of approximately one-third λ. Each band-passed data set gives a migration image at a different depth. Results with synthetic data and field data recorded over known faults validate the effectiveness of this method. Migrating the surface waves in recorded 2D and 3D data sets accurately reveals the locations of known faults. The limitation of this method is that it requires a dense array of receivers with a geophone interval less than approximately one-half λ.

Electrocardiographic Abnormalities and QTc Interval in Patients Undergoing Hemodialysis.

Directory of Open Access Journals (Sweden)

Yuxin Nie

Full Text Available Sudden cardiac death is one of the primary causes of mortality in chronic hemodialysis (HD patients. Prolonged QTc interval is associated with increased rate of sudden cardiac death. The aim of this article is to assess the abnormalities found in electrocardiograms (ECGs, and to explore factors that can influence the QTc interval.A total of 141 conventional HD patients were enrolled in this study. ECG tests were conducted on each patient before a single dialysis session and 15 minutes before the end of dialysis session (at peak stress. Echocardiography tests were conducted before dialysis session began. Blood samples were drawn by phlebotomy immediately before and after the dialysis session.Before dialysis, 93.62% of the patients were in sinus rhythm, and approximately 65% of the patients showed a prolonged QTc interval (i.e., a QTc interval above 440 ms in males and above 460ms in females. A comparison of ECG parameters before dialysis and at peak stress showed increases in heart rate (77.45±11.92 vs. 80.38±14.65 bpm, p = 0.001 and QTc interval (460.05±24.53 ms vs. 470.93±24.92 ms, p<0.001. After dividing patients into two groups according to the QTc interval, lower pre-dialysis serum concentrations of potassium (K+, calcium (Ca2+, phosphorus, calcium* phosphorus (Ca*P, and higher concentrations of plasma brain natriuretic peptide (BNP were found in the group with prolonged QTc intervals. Patients in this group also had a larger left atrial diameter (LAD and a thicker interventricular septum, and they tended to be older than patients in the other group. Then patients were divided into two groups according to ΔQTc (ΔQTc = QTc peak-stress- QTc pre-HD. When analyzing the patients whose QTc intervals were longer at peak stress than before HD, we found that they had higher concentrations of Ca2+ and P5+ and lower concentrations of K+, ferritin, UA, and BNP. They were also more likely to be female. In addition, more cardiac construction

Spectral of electrocardiographic RR intervals to indicate atrial fibrillation

Science.gov (United States)

Nuryani, Nuryani; Satrio Nugroho, Anto

2017-11-01

Atrial fibrillation is a serious heart diseases, which is associated on the risk of death, and thus an early detection of atrial fibrillation is necessary. We have investigated spectral pattern of electrocardiogram in relation to atrial fibrillation. The utilized feature of electrocardiogram is RR interval. RR interval is the time interval between a two-consecutive R peaks. A series of RR intervals in a time segment is converted to a signal with a frequency domain. The frequency components are investigated to find the components which significantly associate to atrial fibrillation. A segment is defined as atrial fibrillation or normal segments by considering a defined number of atrial fibrillation RR in the segment. Using clinical data of 23 patients with atrial fibrillation, we find that the frequency components could be used to indicate atrial fibrillation.

PREFACE: Vibrations at surfaces Vibrations at surfaces

Science.gov (United States)

Rahman, Talat S.

2011-12-01

This special issue is dedicated to the phenomenon of vibrations at surfaces—a topic that was indispensible a couple of decades ago, since it was one of the few phenomena capable of revealing the nature of binding at solid surfaces. For clean surfaces, the frequencies of modes with characteristic displacement patterns revealed how surface geometry, as well as the nature of binding between atoms in the surface layers, could be different from that in the bulk solid. Dispersion of the surface phonons provided further measures of interatomic interactions. For chemisorbed molecules on surfaces, frequencies and dispersion of the vibrational modes were also critical for determining adsorption sites. In other words, vibrations at surfaces served as a reliable means of extracting information about surface structure, chemisorption and overlayer formation. Experimental techniques, such as electron energy loss spectroscopy and helium-atom-surface scattering, coupled with infra-red spectroscopy, were continually refined and their resolutions enhanced to capture subtleties in the dynamics of atoms and molecules at surfaces. Theoretical methods, whether based on empirical and semi-empirical interatomic potential or on ab initio electronic structure calculations, helped decipher experimental observations and provide deeper insights into the nature of the bond between atoms and molecules in regions of reduced symmetry, as encountered on solid surfaces. Vibrations at surfaces were thus an integral part of the set of phenomena that characterized surface science. Dedicated workshops and conferences were held to explore the variety of interesting and puzzling features revealed in experimental and theoretical investigations of surface vibrational modes and their dispersion. One such conference, Vibrations at Surfaces, first organized by Harald Ibach in Juelich in 1980, continues to this day. The 13th International Conference on Vibrations at Surfaces was held at the University of

Ground surface temperature and continental heat gain: uncertainties from underground

International Nuclear Information System (INIS)

Beltrami, Hugo; Matharoo, Gurpreet S; Smerdon, Jason E

2015-01-01

Temperature changes at the Earth's surface propagate and are recorded underground as perturbations to the equilibrium thermal regime associated with the heat flow from the Earth's interior. Borehole climatology is concerned with the analysis and interpretation of these downward propagating subsurface temperature anomalies in terms of surface climate. Proper determination of the steady-state geothermal regime is therefore crucial because it is the reference against which climate-induced subsurface temperature anomalies are estimated. Here, we examine the effects of data noise on the determination of the steady-state geothermal regime of the subsurface and the subsequent impact on estimates of ground surface temperature (GST) history and heat gain. We carry out a series of Monte Carlo experiments using 1000 Gaussian noise realizations and depth sections of 100 and 200 m as for steady-state estimates depth intervals, as well as a range of data sampling intervals from 10 m to 0.02 m. Results indicate that typical uncertainties for 50 year averages are on the order of ±0.02 K for the most recent 100 year period. These uncertainties grow with decreasing sampling intervals, reaching about ±0.1 K for a 10 m sampling interval under identical conditions and target period. Uncertainties increase for progressively older periods, reaching ±0.3 K at 500 years before present for a 10 m sampling interval. The uncertainties in reconstructed GST histories for the Northern Hemisphere for the most recent 50 year period can reach a maximum of ±0.5 K in some areas. We suggest that continuous logging should be the preferred approach when measuring geothermal data for climate reconstructions, and that for those using the International Heat Flow Commission database for borehole climatology, the steady-state thermal conditions should be estimated from boreholes as deep as possible and using a large fitting depth range (∼100 m). (letter)

Modeling Apple Surface Temperature Dynamics Based on Weather Data

Directory of Open Access Journals (Sweden)

Lei Li

2014-10-01

Full Text Available The exposure of fruit surfaces to direct sunlight during the summer months can result in sunburn damage. Losses due to sunburn damage are a major economic problem when marketing fresh apples. The objective of this study was to develop and validate a model for simulating fruit surface temperature (FST dynamics based on energy balance and measured weather data. A series of weather data (air temperature, humidity, solar radiation, and wind speed was recorded for seven hours between 11:00–18:00 for two months at fifteen minute intervals. To validate the model, the FSTs of “Fuji” apples were monitored using an infrared camera in a natural orchard environment. The FST dynamics were measured using a series of thermal images. For the apples that were completely exposed to the sun, the RMSE of the model for estimating FST was less than 2.0 °C. A sensitivity analysis of the emissivity of the apple surface and the conductance of the fruit surface to water vapour showed that accurate estimations of the apple surface emissivity were important for the model. The validation results showed that the model was capable of accurately describing the thermal performances of apples under different solar radiation intensities. Thus, this model could be used to more accurately estimate the FST relative to estimates that only consider the air temperature. In addition, this model provides useful information for sunburn protection management.

Modeling apple surface temperature dynamics based on weather data.

Science.gov (United States)

Li, Lei; Peters, Troy; Zhang, Qin; Zhang, Jingjin; Huang, Danfeng

2014-10-27

The exposure of fruit surfaces to direct sunlight during the summer months can result in sunburn damage. Losses due to sunburn damage are a major economic problem when marketing fresh apples. The objective of this study was to develop and validate a model for simulating fruit surface temperature (FST) dynamics based on energy balance and measured weather data. A series of weather data (air temperature, humidity, solar radiation, and wind speed) was recorded for seven hours between 11:00-18:00 for two months at fifteen minute intervals. To validate the model, the FSTs of "Fuji" apples were monitored using an infrared camera in a natural orchard environment. The FST dynamics were measured using a series of thermal images. For the apples that were completely exposed to the sun, the RMSE of the model for estimating FST was less than 2.0 °C. A sensitivity analysis of the emissivity of the apple surface and the conductance of the fruit surface to water vapour showed that accurate estimations of the apple surface emissivity were important for the model. The validation results showed that the model was capable of accurately describing the thermal performances of apples under different solar radiation intensities. Thus, this model could be used to more accurately estimate the FST relative to estimates that only consider the air temperature. In addition, this model provides useful information for sunburn protection management.

Graphing within-subjects confidence intervals using SPSS and S-Plus.

Science.gov (United States)

Wright, Daniel B

2007-02-01

Within-subjects confidence intervals are often appropriate to report and to display. Loftus and Masson (1994) have reported methods to calculate these, and their use is becoming common. In the present article, procedures for calculating within-subjects confidence intervals in SPSS and S-Plus are presented (an R version is on the accompanying Web site). The procedure in S-Plus allows the user to report the bias corrected and adjusted bootstrap confidence intervals as well as the standard confidence intervals based on traditional methods. The presented code can be easily altered to fit the individual user's needs.

A sequent calculus for signed interval logic

DEFF Research Database (Denmark)

Rasmussen, Thomas Marthedal

2001-01-01

We propose and discuss a complete sequent calculus formulation for Signed Interval Logic (SIL) with the chief purpose of improving proof support for SIL in practice. The main theoretical result is a simple characterization of the limit between decidability and undecidability of quantifier-free SIL....... We present a mechanization of SIL in the generic proof assistant Isabelle and consider techniques for automated reasoning. Many of the results and ideas of this report are also applicable to traditional (non-signed) interval logic and, hence, to Duration Calculus....

The effect of esmolol on corrected-QT interval, corrected-QT interval dispersion changes seen during anesthesia induction in hypertensive patients taking an angiotensin-converting enzyme inhibitor

Directory of Open Access Journals (Sweden)

Zahit Çeker

2015-02-01

Full Text Available BACKGROUND AND OBJECTIVES: The importance of minimizing the exaggerated sympatho-adrenergic responses and QT interval and QT interval dispersion changes that may develop due to laryngoscopy and tracheal intubation during anesthesia induction in the hypertensive patients is clear. Esmolol decreases the hemodynamic response to laryngoscopy and intubation. However, the effect of esmolol in decreasing the prolonged QT interval and QT interval dispersion as induced by laryngoscopy and intubation is controversial. We investigated the effect of esmolol on the hemodynamic, and corrected-QT interval and corrected-QT interval dispersion changes seen during anesthesia induction in hypertensive patients using angiotensin converting enzyme inhibitors. METHODS: 60 ASA I-II patients, with essential hypertension using angiotensin converting enzyme inhibitors were included in the study. The esmolol group received esmolol at a bolus dose of 500 mcg/kg followed by a 100 mcg/kg/min infusion which continued until the 4th min after intubation. The control group received 0.9% saline similar to the esmolol group. The mean blood pressure, heart rate values and the electrocardiogram records were obtained as baseline values before the anesthesia, 5 min after esmolol and saline administration, 3 min after the induction and 30 s, 2 min and 4 min after intubation. RESULTS: The corrected-QT interval was shorter in the esmolol group (p = 0.012, the corrected-QT interval dispersion interval was longer in the control group (p = 0.034 and the mean heart rate was higher in the control group (p = 0.022 30 s after intubation. The risk of arrhythmia frequency was higher in the control group in the 4-min period following intubation (p = 0.038. CONCLUSION: Endotracheal intubation was found to prolong corrected-QT interval and corrected-QT interval dispersion, and increase the heart rate during anesthesia induction with propofol in hypertensive patients using angiotensin converting

Persistent fluctuations in stride intervals under fractal auditory stimulation.

Science.gov (United States)

Marmelat, Vivien; Torre, Kjerstin; Beek, Peter J; Daffertshofer, Andreas

2014-01-01

Stride sequences of healthy gait are characterized by persistent long-range correlations, which become anti-persistent in the presence of an isochronous metronome. The latter phenomenon is of particular interest because auditory cueing is generally considered to reduce stride variability and may hence be beneficial for stabilizing gait. Complex systems tend to match their correlation structure when synchronizing. In gait training, can one capitalize on this tendency by using a fractal metronome rather than an isochronous one? We examined whether auditory cues with fractal variations in inter-beat intervals yield similar fractal inter-stride interval variability as isochronous auditory cueing in two complementary experiments. In Experiment 1, participants walked on a treadmill while being paced by either an isochronous or a fractal metronome with different variation strengths between beats in order to test whether participants managed to synchronize with a fractal metronome and to determine the necessary amount of variability for participants to switch from anti-persistent to persistent inter-stride intervals. Participants did synchronize with the metronome despite its fractal randomness. The corresponding coefficient of variation of inter-beat intervals was fixed in Experiment 2, in which participants walked on a treadmill while being paced by non-isochronous metronomes with different scaling exponents. As expected, inter-stride intervals showed persistent correlations similar to self-paced walking only when cueing contained persistent correlations. Our results open up a new window to optimize rhythmic auditory cueing for gait stabilization by integrating fractal fluctuations in the inter-beat intervals.

Tyre-road contact using a particle-envelope surface model

Science.gov (United States)

Pinnington, Roger J.

2013-12-01

Determination of the contact forces is the central problem in all aspects of road-tyre interaction: i.e. noise, energy loss and friction. A procedure to find the contact forces under a rolling tyre is presented in four stages. First, the contact stiffness of a uniform peak array from indentations in the rubber tread, and also tyre carcass deflection, is described by some new simplified expressions. Second, a routine divides a single surface profile into equal search intervals, in which the highest peaks are identified. These are used to obtain the parameters for the interval, i.e. the mean envelope and the mean interval. The process is repeated at geometrically decreasing search intervals until the level of the data resolution, thereby describing the profile by a set of envelopes. The ‘strip profile’ ultimately used to describe the surface, is obtained by selecting the highest points across the profiles of one stone's width. The third stage is to combine the strip profile envelopes with the contact stiffness expressions, yielding the nonlinear stiffness-displacement, and force-displacement relationships for the chosen road-tyre combination. Finally the contact pressure distribution from a steady-state rolling tyre model is applied to the strip profile, via the force-displacement relationship, giving the local tyre displacements on the road texture. This displacement pattern is shown to be proportional to the time and space varying contact pressure, which then is incorporated into a wave equation for rolling contact.

Interval forecasting of cyber-attacks on industrial control systems

Science.gov (United States)

Ivanyo, Y. M.; Krakovsky, Y. M.; Luzgin, A. N.

2018-03-01

At present, cyber-security issues of industrial control systems occupy one of the key niches in a state system of planning and management Functional disruption of these systems via cyber-attacks may lead to emergencies related to loss of life, environmental disasters, major financial and economic damage, or disrupted activities of cities and settlements. There is then an urgent need to develop protection methods against cyber-attacks. This paper studied the results of cyber-attack interval forecasting with a pre-set intensity level of cyber-attacks. Interval forecasting is the forecasting of one interval from two predetermined ones in which a future value of the indicator will be obtained. For this, probability estimates of these events were used. For interval forecasting, a probabilistic neural network with a dynamic updating value of the smoothing parameter was used. A dividing bound of these intervals was determined by a calculation method based on statistical characteristics of the indicator. The number of cyber-attacks per hour that were received through a honeypot from March to September 2013 for the group ‘zeppo-norcal’ was selected as the indicator.

Path Loss Prediction Over the Lunar Surface Utilizing a Modified Longley-Rice Irregular Terrain Model

Science.gov (United States)

Foore, Larry; Ida, Nathan

2007-01-01

This study introduces the use of a modified Longley-Rice irregular terrain model and digital elevation data representative of an analogue lunar site for the prediction of RF path loss over the lunar surface. The results are validated by theoretical models and past Apollo studies. The model is used to approximate the path loss deviation from theoretical attenuation over a reflecting sphere. Analysis of the simulation results provides statistics on the fade depths for frequencies of interest, and correspondingly a method for determining the maximum range of communications for various coverage confidence intervals. Communication system engineers and mission planners are provided a link margin and path loss policy for communication frequencies of interest.

Search for the maximum efficiency of a ribbed-surfaces device, providing a tight seal

International Nuclear Information System (INIS)

Boutin, Jeanne.

1977-04-01

The purpose of this experiment was to determine the geometrical characteristics of ribbed surfaces used to equip devices in translation or slow rotation motion and having to form an acceptable seal between slightly viscous fluids. It systematically studies the pressure loss coefficient lambda in function of the different parameters setting the form of ribs and their relative position on the opposite sides. It shows that the passages with two ribbed surfaces lead to highly better results than those with only one, the maximum value of lambda, equal to 0.5, being obtained with the ratios: pitch/clearance = 5, depth of groove/clearance = 1,2, and with their teeth face to face on the two opposite ribbed surfaces. With certain shapes, alternate position of ribs can lead to the maximum of lambda yet lower than 0.5 [fr

Targeted deletion of the 9p21 noncoding coronary artery disease risk interval in mice

Energy Technology Data Exchange (ETDEWEB)

Visel, Axel; Zhu, Yiwen; May, Dalit; Afzal, Veena; Gong, Elaine; Attanasio, Catia; Blow, Matthew J.; Cohen, Jonathan C.; Rubin, Edward M.; Pennacchio, Len A.

2010-01-01

Sequence polymorphisms in a 58kb interval on chromosome 9p21 confer a markedly increased risk for coronary artery disease (CAD), the leading cause of death worldwide 1,2. The variants have a substantial impact on the epidemiology of CAD and other life?threatening vascular conditions since nearly a quarter of Caucasians are homozygous for risk alleles. However, the risk interval is devoid of protein?coding genes and the mechanism linking the region to CAD risk has remained enigmatic. Here we show that deletion of the orthologous 70kb noncoding interval on mouse chromosome 4 affects cardiac expression of neighboring genes, as well as proliferation properties of vascular cells. Chr4delta70kb/delta70kb mice are viable, but show increased mortality both during development and as adults. Cardiac expression of two genes near the noncoding interval, Cdkn2a and Cdkn2b, is severely reduced in chr4delta70kb/delta70kb mice, indicating that distant-acting gene regulatory functions are located in the noncoding CAD risk interval. Allelespecific expression of Cdkn2b transcripts in heterozygous mice revealed that the deletion affects expression through a cis-acting mechanism. Primary cultures of chr4delta70kb/delta70kb aortic smooth muscle cells exhibited excessive proliferation and diminished senescence, a cellular phenotype consistent with accelerated CAD pathogenesis. Taken together, our results provide direct evidence that the CAD risk interval plays a pivotal role in regulation of cardiac Cdkn2a/b expression and suggest that this region affects CAD progression by altering the dynamics of vascular cell proliferation.

Controls on surface soil drying rates observed by SMAP and simulated by the Noah land surface model

Science.gov (United States)

Shellito, Peter J.; Small, Eric E.; Livneh, Ben

2018-03-01

Drydown periods that follow precipitation events provide an opportunity to assess controls on soil evaporation on a continental scale. We use SMAP (Soil Moisture Active Passive) observations and Noah simulations from drydown periods to quantify the role of soil moisture, potential evaporation, vegetation cover, and soil texture on soil drying rates. Rates are determined using finite differences over intervals of 1 to 3 days. In the Noah model, the drying rates are a good approximation of direct soil evaporation rates, and our work suggests that SMAP-observed drying is also predominantly affected by direct soil evaporation. Data cover the domain of the North American Land Data Assimilation System Phase 2 and span the first 1.8 years of SMAP's operation. Drying of surface soil moisture observed by SMAP is faster than that simulated by Noah. SMAP drying is fastest when surface soil moisture levels are high, potential evaporation is high, and when vegetation cover is low. Soil texture plays a minor role in SMAP drying rates. Noah simulations show similar responses to soil moisture and potential evaporation, but vegetation has a minimal effect and soil texture has a much larger effect compared to SMAP. When drying rates are normalized by potential evaporation, SMAP observations and Noah simulations both show that increases in vegetation cover lead to decreases in evaporative efficiency from the surface soil. However, the magnitude of this effect simulated by Noah is much weaker than that determined from SMAP observations.

The Role of Higher Harmonics In Musical Interval Perception

Science.gov (United States)

Krantz, Richard; Douthett, Jack

2011-10-01

Using an alternative parameterization of the roughness curve we make direct use of critical band results to investigate the role of higher harmonics on the perception of tonal consonance. We scale the spectral amplitudes in the complex home tone and complex interval tone to simulate acoustic signals of constant energy. Our analysis reveals that even with a relatively small addition of higher harmonics the perfect fifth emerges as a consonant interval with more, musically important, just intervals emerging as consonant as more and more energy is shifted into higher frequencies.

Unpacking a time interval lengthens its perceived temporal distance

Directory of Open Access Journals (Sweden)

Yang eLiu

2014-11-01

Full Text Available In quantity estimation, people often perceive that the whole is less than the sum of its parts. The current study investigated such an unpacking effect in temporal distance judgment. Our results showed that participants in the unpacked condition judged a given time interval longer than those in the packed condition, even the time interval was kept constant between the two conditions. Furthermore, this unpacking effect persists regardless of the unpacking ways we employed. Results suggest that unpacking a time interval may be a good strategy for lengthening its perceived temporal distance.

Modelling uncertainties in the diffusion-advection equation for radon transport in soil using interval arithmetic.

Science.gov (United States)

Chakraverty, S; Sahoo, B K; Rao, T D; Karunakar, P; Sapra, B K

2018-02-01

Modelling radon transport in the earth crust is a useful tool to investigate the changes in the geo-physical processes prior to earthquake event. Radon transport is modeled generally through the deterministic advection-diffusion equation. However, in order to determine the magnitudes of parameters governing these processes from experimental measurements, it is necessary to investigate the role of uncertainties in these parameters. Present paper investigates this aspect by combining the concept of interval uncertainties in transport parameters such as soil diffusivity, advection velocity etc, occurring in the radon transport equation as applied to soil matrix. The predictions made with interval arithmetic have been compared and discussed with the results of classical deterministic model. The practical applicability of the model is demonstrated through a case study involving radon flux measurements at the soil surface with an accumulator deployed in steady-state mode. It is possible to detect the presence of very low levels of advection processes by applying uncertainty bounds on the variations in the observed concentration data in the accumulator. The results are further discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimization of Spacecraft Rendezvous and Docking using Interval Analysis

NARCIS (Netherlands)

Van Kampen, E.; Chu, Q.P.; Mulder, J.A.

2010-01-01

This paper applies interval optimization to the fixed-time multiple impulse rendezvous and docking problem. Current methods for solving this type of optimization problem include for example genetic algorithms and gradient based optimization. Unlike these methods, interval methods can guarantee that

Reduction in interval cancer rates following the introduction of two-view mammography in the UK breast screening programme

Science.gov (United States)

Dibden, A; Offman, J; Parmar, D; Jenkins, J; Slater, J; Binysh, K; McSorley, J; Scorfield, S; Cumming, P; Liao, X-H; Ryan, M; Harker, D; Stevens, G; Rogers, N; Blanks, R; Sellars, S; Patnick, J; Duffy, S W

2014-01-01

Background: The introduction of two-view mammography at incident (subsequent) screens in the National Health Service Breast Screening Programme (NHSBSP) has led to an increased number of cancers detected at screen. However, the effect of two-view mammography on interval cancer rates has yet to be assessed. Methods: Routine screening and interval cancer data were collated from all screening programmes in the United Kingdom for women aged 50–64, screened between 1 April 2003 and 31 March 2005. Interval cancer rates were compared based on whether two-view mammography was in use at the last routine screen. Results: The reduction in interval cancers following screening using two-view mammography compared with one view was 0.68 per 1 000 women screened. Overall, this suggests the introduction of two-view mammography at incident screen was accompanied by a 15–20% reduction in interval cancer rates in the NHSBSP. Conclusion: The introduction of two-view mammography at incident screens is associated with a reduction in incidence of interval cancers. This is consistent with previous publications on a contemporaneous increase in screen-detected cancers. The results provide further evidence of the benefit of the use of two-view mammography at incident screens. PMID:24366303

Specifying real-time systems with interval logic

Science.gov (United States)

Rushby, John

1988-01-01

Pure temporal logic makes no reference to time. An interval temporal logic and an extension to that logic which includes real time constraints are described. The application of this logic by giving a specification for the well-known lift (elevator) example is demonstrated. It is shown how interval logic can be extended to include a notion of process. How the specification language and verification environment of EHDM could be enhanced to support this logic is described. A specification of the alternating bit protocol in this extended version of the specification language of EHDM is given.

Sympathetic skin response and R-R interval variation in cases with rheumatoid arthritis.

Science.gov (United States)

Gozke, E; Erdogan, N; Akyuz, G; Turan, B; Akyuz, E; Us, O

2003-03-01

To investigate the autonomic nervus system involvement in cases with rheumatoid arthritis (RA) by assesing sympathetic skin response (SSR) and R-R interval variation (RRIV), 14 healthy women and 10 women with RA, all of them without clinic dysautonomies were examined. SSR's were recorded palmar surface of both hands and soles of both feet, after stimulating median and tibial nerves individually. RRIV's were assessed at rest and during six deep breathing in one minute with electrodes placed on dorsal surfaces of both hands. SSR could not be obtained from lower extremities of one case with RA. We could not find any significant difference between two groups in terms of SSR latencies. RRIV values obtained during deep breathing to those recorded at rest (D%/R%) was found to be significantly lower in RA cases than healthy controls. RRIV values increased with deep breathing in healthy subjects, while they decreased in 50% of the RA cases. We conclude that assessment of SSR and RRIV are valuble methods for revelation of subclinical autonomic involvement in cases with RA.

Using Interval-Based Systems to Measure Behavior in Early Childhood Special Education and Early Intervention

Science.gov (United States)

Lane, Justin D.; Ledford, Jennifer R.

2014-01-01

The purpose of this article is to summarize the current literature on the accuracy and reliability of interval systems using data from previously published experimental studies that used either human observations of behavior or computer simulations. Although multiple comparison studies provided mathematical adjustments or modifications to interval…

Auroral Electrojet Index Designed to Provide a Global Measure, Hourly Intervals, of Auroral Zone Magnetic Activity

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Auroral Electrojet (AE) index is designed to provide a global quantitative measure of auroral zone magnetic activity produced by enhanced ionospheric currents...

A Note on Inclusion Intervals of Matrix Singular Values

Directory of Open Access Journals (Sweden)

Shu-Yu Cui

2012-01-01

Full Text Available We establish an inclusion relation between two known inclusion intervals of matrix singular values in some special case. In addition, based on the use of positive scale vectors, a known inclusion interval of matrix singular values is also improved.

Frequency Interval Cross Gramians for Linear and Bilinear Systems

DEFF Research Database (Denmark)

Jazlan, Ahmad; Sreeram, Victor; Shaker, Hamid Reza

2017-01-01

In many control engineering problems, it is desired to analyze the systems at particular frequency intervals of interest. This paper focuses on the development of frequency interval cross gramians for both linear and bilinear systems. New generalized Sylvester equations for calculating the freque...

EFFECT OF INTERPREGNANCY INTERVAL ON SUBSEQUENT PREGNANCY FOLLOWING A MISCARRIAGE

Directory of Open Access Journals (Sweden)

Anasooya Parail Sankaran

2017-03-01

Full Text Available BACKGROUND Primary Objective of this study was to determine the effect on interpregnancy interval on subsequent pregnancies after a miscarriage. Secondary Objective was to study the maternal and foetal complications following shorter interpregnancy interval. MATERIALS AND METHODS This study was done in OBG Department, Government TD Medical College, Alappuzha, during 2011 to 2013. A total of 347 cases were studied who have had a miscarriage before the current pregnancy. RESULTS Compared with women with an interpregnancy interval of 6-12 months, those who conceived again within six months were more likely to have another miscarriage and ectopic gestation (odds ratio 0.106, p value 0.000.. Compared with women with interpregnancy interval of <6 months, women who conceived again in 6-12 months went on to have a vaginal delivery in the second pregnancy (Odd’s ratio 0.79 and p value in is significant.Lower segment caesarean section (LSCS is significantly high in women whose interpregnancy interval is more than 12 months (Odds ratio 0.64 and p value 0.000. Maternal complications like APH, PPH, preeclampsia, hypertension, etc. were significantly seen higher in women whose interpregnancy interval is more than 12 months (odds ratio 0.41 p value- 0.000. The women with interpregnancy interval less than 6 months didn’t develop any significant foetal complications. Most of the complications like premature rupture of membrane (PROM, meconium stained amniotic fluid (MSAF, oligamnios, foetal growth restriction (FGR, etc. are seen more in the women with interpregnancy interval 6 to 12 months odds ratio (0.30 p value significant, but breech and foetal distress are seen significantly higher in women with interpregnancy interval more than 12 months (Odds ratio 0.29 p value 0.000. Induction of labour was not significantly raised in any group. CONCLUSION Women who conceive within 6 months of an initial miscarriage have the best reproductive outcomes and lower

Zero entropy continuous interval maps and MMLS-MMA property

Science.gov (United States)

Jiang, Yunping

2018-06-01

We prove that the flow generated by any continuous interval map with zero topological entropy is minimally mean-attractable and minimally mean-L-stable. One of the consequences is that any oscillating sequence is linearly disjoint from all flows generated by all continuous interval maps with zero topological entropy. In particular, the Möbius function is linearly disjoint from all flows generated by all continuous interval maps with zero topological entropy (Sarnak’s conjecture for continuous interval maps). Another consequence is a non-trivial example of a flow having discrete spectrum. We also define a log-uniform oscillating sequence and show a result in ergodic theory for comparison. This material is based upon work supported by the National Science Foundation. It is also partially supported by a collaboration grant from the Simons Foundation (grant number 523341) and PSC-CUNY awards and a grant from NSFC (grant number 11571122).

Discrete-time optimal control and games on large intervals

CERN Document Server

Zaslavski, Alexander J

2017-01-01

Devoted to the structure of approximate solutions of discrete-time optimal control problems and approximate solutions of dynamic discrete-time two-player zero-sum games, this book presents results on properties of approximate solutions in an interval that is independent lengthwise, for all sufficiently large intervals. Results concerning the so-called turnpike property of optimal control problems and zero-sum games in the regions close to the endpoints of the time intervals are the main focus of this book. The description of the structure of approximate solutions on sufficiently large intervals and its stability will interest graduate students and mathematicians in optimal control and game theory, engineering, and economics. This book begins with a brief overview and moves on to analyze the structure of approximate solutions of autonomous nonconcave discrete-time optimal control Lagrange problems.Next the structures of approximate solutions of autonomous discrete-time optimal control problems that are discret...

Complete Blood Count Reference Intervals for Healthy Han Chinese Adults

Science.gov (United States)

Mu, Runqing; Guo, Wei; Qiao, Rui; Chen, Wenxiang; Jiang, Hong; Ma, Yueyun; Shang, Hong

2015-01-01

Background Complete blood count (CBC) reference intervals are important to diagnose diseases, screen blood donors, and assess overall health. However, current reference intervals established by older instruments and technologies and those from American and European populations are not suitable for Chinese samples due to ethnic, dietary, and lifestyle differences. The aim of this multicenter collaborative study was to establish CBC reference intervals for healthy Han Chinese adults. Methods A total of 4,642 healthy individuals (2,136 males and 2,506 females) were recruited from six clinical centers in China (Shenyang, Beijing, Shanghai, Guangzhou, Chengdu, and Xi’an). Blood samples collected in K2EDTA anticoagulant tubes were analyzed. Analysis of variance was performed to determine differences in consensus intervals according to the use of data from the combined sample and selected samples. Results Median and mean platelet counts from the Chengdu center were significantly lower than those from other centers. Red blood cell count (RBC), hemoglobin (HGB), and hematocrit (HCT) values were higher in males than in females at all ages. Other CBC parameters showed no significant instrument-, region-, age-, or sex-dependent difference. Thalassemia carriers were found to affect the lower or upper limit of different RBC profiles. Conclusion We were able to establish consensus intervals for CBC parameters in healthy Han Chinese adults. RBC, HGB, and HCT intervals were established for each sex. The reference interval for platelets for the Chengdu center should be established independently. PMID:25769040

Persistent fluctuations in stride intervals under fractal auditory stimulation.

Directory of Open Access Journals (Sweden)

Vivien Marmelat

Full Text Available Stride sequences of healthy gait are characterized by persistent long-range correlations, which become anti-persistent in the presence of an isochronous metronome. The latter phenomenon is of particular interest because auditory cueing is generally considered to reduce stride variability and may hence be beneficial for stabilizing gait. Complex systems tend to match their correlation structure when synchronizing. In gait training, can one capitalize on this tendency by using a fractal metronome rather than an isochronous one? We examined whether auditory cues with fractal variations in inter-beat intervals yield similar fractal inter-stride interval variability as isochronous auditory cueing in two complementary experiments. In Experiment 1, participants walked on a treadmill while being paced by either an isochronous or a fractal metronome with different variation strengths between beats in order to test whether participants managed to synchronize with a fractal metronome and to determine the necessary amount of variability for participants to switch from anti-persistent to persistent inter-stride intervals. Participants did synchronize with the metronome despite its fractal randomness. The corresponding coefficient of variation of inter-beat intervals was fixed in Experiment 2, in which participants walked on a treadmill while being paced by non-isochronous metronomes with different scaling exponents. As expected, inter-stride intervals showed persistent correlations similar to self-paced walking only when cueing contained persistent correlations. Our results open up a new window to optimize rhythmic auditory cueing for gait stabilization by integrating fractal fluctuations in the inter-beat intervals.

An Introduction to Confidence Intervals for Both Statistical Estimates and Effect Sizes.

Science.gov (United States)

Capraro, Mary Margaret

This paper summarizes methods of estimating confidence intervals, including classical intervals and intervals for effect sizes. The recent American Psychological Association (APA) Task Force on Statistical Inference report suggested that confidence intervals should always be reported, and the fifth edition of the APA "Publication Manual"…

[The effect of esmolol on corrected-QT interval, corrected-QT interval dispersion changes seen during anesthesia induction in hypertensive patients taking an angiotensin-converting enzyme inhibitor].

Science.gov (United States)

Ceker, Zahit; Takmaz, Suna Akın; Baltaci, Bülent; Başar, Hülya

2015-01-01

The importance of minimizing the exaggerated sympatho-adrenergic responses and QT interval and QT interval dispersion changes that may develop due to laryngoscopy and tracheal intubation during anesthesia induction in the hypertensive patients is clear. Esmolol decreases the hemodynamic response to laryngoscopy and intubation. However, the effect of esmolol in decreasing the prolonged QT interval and QT interval dispersion as induced by laryngoscopy and intubation is controversial. We investigated the effect of esmolol on the hemodynamic, and corrected-QT interval and corrected-QT interval dispersion changes seen during anesthesia induction in hypertensive patients using angiotensin converting enzyme inhibitors. 60 ASA I-II patients, with essential hypertension using angiotensin converting enzyme inhibitors were included in the study. The esmolol group received esmolol at a bolus dose of 500mcg/kg followed by a 100mcg/kg/min infusion which continued until the 4th min after intubation. The control group received 0.9% saline similar to the esmolol group. The mean blood pressure, heart rate values and the electrocardiogram records were obtained as baseline values before the anesthesia, 5min after esmolol and saline administration, 3min after the induction and 30s, 2min and 4min after intubation. The corrected-QT interval was shorter in the esmolol group (p=0.012), the corrected-QT interval dispersion interval was longer in the control group (p=0.034) and the mean heart rate was higher in the control group (p=0.022) 30s after intubation. The risk of arrhythmia frequency was higher in the control group in the 4-min period following intubation (p=0.038). Endotracheal intubation was found to prolong corrected-QT interval and corrected-QT interval dispersion, and increase the heart rate during anesthesia induction with propofol in hypertensive patients using angiotensin converting enzyme inhibitors. These effects were prevented with esmolol (500mcg/kg bolus, followed by

Timing intervals using population synchrony and spike timing dependent plasticity

Directory of Open Access Journals (Sweden)

Wei Xu

2016-12-01

Full Text Available We present a computational model by which ensembles of regularly spiking neurons can encode different time intervals through synchronous firing. We show that a neuron responding to a large population of convergent inputs has the potential to learn to produce an appropriately-timed output via spike-time dependent plasticity. We explain why temporal variability of this population synchrony increases with increasing time intervals. We also show that the scalar property of timing and its violation at short intervals can be explained by the spike-wise accumulation of jitter in the inter-spike intervals of timing neurons. We explore how the challenge of encoding longer time intervals can be overcome and conclude that this may involve a switch to a different population of neurons with lower firing rate, with the added effect of producing an earlier bias in response. Experimental data on human timing performance show features in agreement with the model’s output.

Application of Interval Predictor Models to Space Radiation Shielding

Science.gov (United States)

Crespo, Luis G.; Kenny, Sean P.; Giesy,Daniel P.; Norman, Ryan B.; Blattnig, Steve R.

2016-01-01

This paper develops techniques for predicting the uncertainty range of an output variable given input-output data. These models are called Interval Predictor Models (IPM) because they yield an interval valued function of the input. This paper develops IPMs having a radial basis structure. This structure enables the formal description of (i) the uncertainty in the models parameters, (ii) the predicted output interval, and (iii) the probability that a future observation would fall in such an interval. In contrast to other metamodeling techniques, this probabilistic certi cate of correctness does not require making any assumptions on the structure of the mechanism from which data are drawn. Optimization-based strategies for calculating IPMs having minimal spread while containing all the data are developed. Constraints for bounding the minimum interval spread over the continuum of inputs, regulating the IPMs variation/oscillation, and centering its spread about a target point, are used to prevent data over tting. Furthermore, we develop an approach for using expert opinion during extrapolation. This metamodeling technique is illustrated using a radiation shielding application for space exploration. In this application, we use IPMs to describe the error incurred in predicting the ux of particles resulting from the interaction between a high-energy incident beam and a target.

Characterization of Cardiac Time Intervals in Healthy Bonnet Macaques (Macaca radiata) by Using an Electronic Stethoscope

Science.gov (United States)

Kamran, Haroon; Salciccioli, Louis; Pushilin, Sergei; Kumar, Paraag; Carter, John; Kuo, John; Novotney, Carol; Lazar, Jason M

2011-01-01

Nonhuman primates are used frequently in cardiovascular research. Cardiac time intervals derived by phonocardiography have long been used to assess left ventricular function. Electronic stethoscopes are simple low-cost systems that display heart sound signals. We assessed the use of an electronic stethoscope to measure cardiac time intervals in 48 healthy bonnet macaques (age, 8 ± 5 y) based on recorded heart sounds. Technically adequate recordings were obtained from all animals and required 1.5 ± 1.3 min. The following cardiac time intervals were determined by simultaneously recording acoustic and single-lead electrocardiographic data: electromechanical activation time (QS1), electromechanical systole (QS2), the time interval between the first and second heart sounds (S1S2), and the time interval between the second and first sounds (S2S1). QS2 was correlated with heart rate, mean arterial pressure, diastolic blood pressure, and left ventricular ejection time determined by using echocardiography. S1S2 correlated with heart rate, mean arterial pressure, diastolic blood pressure, left ventricular ejection time, and age. S2S1 correlated with heart rate, mean arterial pressure, diastolic blood pressure, systolic blood pressure, and left ventricular ejection time. QS1 did not correlate with any anthropometric or echocardiographic parameter. The relation S1S2/S2S1 correlated with systolic blood pressure. On multivariate analyses, heart rate was the only independent predictor of QS2, S1S2, and S2S1. In conclusion, determination of cardiac time intervals is feasible and reproducible by using an electrical stethoscope in nonhuman primates. Heart rate is a major determinant of QS2, S1S2, and S2S1 but not QS1; regression equations for reference values for cardiac time intervals in bonnet macaques are provided. PMID:21439218

Awareness of Racial Disparities in Kidney Transplantation among Health Care Providers in Dialysis Facilities.

Science.gov (United States)

Kim, Joyce J; Basu, Mohua; Plantinga, Laura; Pastan, Stephen O; Mohan, Sumit; Smith, Kayla; Melanson, Taylor; Escoffery, Cam; Patzer, Rachel E

2018-05-07

Despite the important role that health care providers at dialysis facilities have in reducing racial disparities in access to kidney transplantation in the United States, little is known about provider awareness of these disparities. We aimed to evaluate health care providers' awareness of racial disparities in kidney transplant waitlisting and identify factors associated with awareness. We conducted a cross-sectional analysis of a survey of providers from low-waitlisting dialysis facilities ( n =655) across all 18 ESRD networks administered in 2016 in the United States merged with 2014 US Renal Data System and 2014 US Census data. Awareness of national racial disparity in waitlisting was defined as responding "yes" to the question: "Nationally, do you think that African Americans currently have lower waitlisting rates than white patients on average?" The secondary outcome was providers' perceptions of racial difference in waitlisting at their own facilities. Among 655 providers surveyed, 19% were aware of the national racial disparity in waitlisting: 50% (57 of 113) of medical directors, 11% (35 of 327) of nurse managers, and 16% (35 of 215) of other providers. In analyses adjusted for provider and facility characteristics, nurse managers (versus medical directors; odds ratio, 7.33; 95% confidence interval, 3.35 to 16.0) and white providers (versus black providers; odds ratio, 2.64; 95% confidence interval, 1.39 to 5.02) were more likely to be unaware of a national racial disparity in waitlisting. Facilities in the South (versus the Northeast; odds ratio, 3.05; 95% confidence interval, 1.04 to 8.94) and facilities with a low percentage of blacks (versus a high percentage of blacks; odds ratio, 1.86; 95% confidence interval, 1.02 to 3.39) were more likely to be unaware. One quarter of facilities had >5% racial difference in waitlisting within their own facilities, but only 5% were aware of the disparity. Among a limited sample of dialysis facilities with low

Surface rupturing earthquakes repeated in the 300 years along the ISTL active fault system, central Japan

Science.gov (United States)

Katsube, Aya; Kondo, Hisao; Kurosawa, Hideki

2017-06-01

Surface rupturing earthquakes produced by intraplate active faults generally have long recurrence intervals of a few thousands to tens of thousands of years. We here report the first evidence for an extremely short recurrence interval of 300 years for surface rupturing earthquakes on an intraplate system in Japan. The Kamishiro fault of the Itoigawa-Shizuoka Tectonic Line (ISTL) active fault system generated a Mw 6.2 earthquake in 2014. A paleoseismic trench excavation across the 2014 surface rupture showed the evidence for the 2014 event and two prior paleoearthquakes. The slip of the penultimate earthquake was similar to that of 2014 earthquake, and its timing was constrained to be after A.D. 1645. Judging from the timing, the damaged area, and the amount of slip, the penultimate earthquake most probably corresponds to a historical earthquake in A.D. 1714. The recurrence interval of the two most recent earthquakes is thus extremely short compared with intervals on other active faults known globally. Furthermore, the slip repetition during the last three earthquakes is in accordance with the time-predictable recurrence model rather than the characteristic earthquake model. In addition, the spatial extent of the 2014 surface rupture accords with the distribution of a serpentinite block, suggesting that the relatively low coefficient of friction may account for the unusually frequent earthquakes. These findings would affect long-term forecast of earthquake probability and seismic hazard assessment on active faults.

Right Propositional Neighborhood Logic over Natural Numbers with Integer Constraints for Interval Lengths

DEFF Research Database (Denmark)

Bresolin, Davide; Goranko, Valentin; Montanari, Angelo

2009-01-01

Interval temporal logics are based on interval structures over linearly (or partially) ordered domains, where time intervals, rather than time instants, are the primitive ontological entities. In this paper we introduce and study Right Propositional Neighborhood Logic over natural numbers...... with integer constraints for interval lengths, which is a propositional interval temporal logic featuring a modality for the 'right neighborhood' relation between intervals and explicit integer constraints for interval lengths. We prove that it has the bounded model property with respect to ultimately periodic...

Modeling Relationships Between Flight Crew Demographics and Perceptions of Interval Management

Science.gov (United States)

Remy, Benjamin; Wilson, Sara R.

2016-01-01

The Interval Management Alternative Clearances (IMAC) human-in-the-loop simulation experiment was conducted to assess interval management system performance and participants' acceptability and workload while performing three interval management clearance types. Twenty-four subject pilots and eight subject controllers flew ten high-density arrival scenarios into Denver International Airport during two weeks of data collection. This analysis examined the possible relationships between subject pilot demographics on reported perceptions of interval management in IMAC. Multiple linear regression models were created with a new software tool to predict subject pilot questionnaire item responses from demographic information. General patterns were noted across models that may indicate flight crew demographics influence perceptions of interval management.

Rapid determination of long-lived artificial alpha radionuclides using time interval analysis

International Nuclear Information System (INIS)

Uezu, Yasuhiro; Koarashi, Jun; Sanada, Yukihisa; Hashimoto, Tetsuo

2003-01-01

It is important to monitor long lived alpha radionuclides as plutonium ( 238 Pu, 239+240 Pu) in the field of working area and environment of nuclear fuel cycle facilities, because it is well known that potential risks of cancer-causing from alpha radiation is higher than gamma radiations. Thus, these monitoring are required high sensitivity, high resolution and rapid determination in order to measure a very low-level concentration of plutonium isotopes. In such high sensitive monitoring, natural radionuclides, including radon ( 222 Rn or 220 Rn) and their progenies, should be eliminated as low as possible. In this situation, a sophisticated discrimination method between Pu and progenies of 222 Rn or 220 Rn using time interval analysis (TIA), which was able to subtract short-lived radionuclides using the time interval distributions calculation of successive alpha and beta decay events within millisecond or microsecond orders, was designed and developed. In this system, alpha rays from 214 Po, 216 Po and 212 Po are extractable. TIA measuring system composes of Silicon Surface Barrier Detector (SSD), an amplifier, an Analog to Digital Converter (ADC), a Multi-Channel Analyzer (MCA), a high-resolution timer (TIMER), a multi-parameter collector and a personal computer. In ADC, incidental alpha and beta pulses are sent to the MCA and the TIMER simultaneously. Pulses from them are synthesized by the multi-parameter collector. After measurement, natural radionuclides are subtracted. Airborne particles were collected on membrane filter for 60 minutes at 100 L/min. Small Pu particles were added on the surface of it. Alpha and beta rays were measured and natural radionuclides were subtracted within 5 times of 145 msec. by TIA. As a result of it, the hidden Pu in natural background could be recognized clearly. The lower limit of determination of 239 Pu is calculated as 6x10 -9 Bq/cm 3 . This level is satisfied with the derived air concentration (DAC) of 239 Pu (8x10 -9 Bq/cm 3

Timing of multiple overlapping intervals : How many clocks do we have?

NARCIS (Netherlands)

van Rijn, Hedderik; Taatgen, Niels A.

2008-01-01

Humans perceive and reproduce short intervals of time (e.g. 1-60 s) relatively accurately, and are capable of timing multiple overlapping intervals if these intervals are presented in different modalities [e.g., Rousseau, L., & Rousseau, RL (1996). Stop-reaction time and the internal clock.

Inter-birth interval in zebras is longer following the birth of male foals than after female foals

Science.gov (United States)

Barnier, Florian; Grange, Sophie; Ganswindt, Andre; Ncube, Hlengisizwe; Duncan, Patrick

2012-07-01

Mammalian reproductive rates vary among individuals for physiological and environmental reasons. This study aims to determine reproductive rates from an individually monitored population of wild Plains zebras Equus quagga, and to assess the sources of variability in inter-birth intervals. The animals were monitored, where possible, every six months from 2004 to 2011. Thirty nine intervals corresponding to 65 births in 26 mares were identified, using direct observations and faecal steroid monitoring. Mean foaling rate of the population is 0.74 foal/year, and comparable with the literature. There was no significant effect of mother's age, nor of the season of previous birth on the length of inter-birth intervals. Inter-birth interval was significantly longer when the first foal was a male. This finding indicates that additional costs of having a son may delay future reproduction and thus reduce the total number of offspring a mare can have during her lifetime. Individually-based data provide critical information on the determinants of reproductive rates, and are therefore a key to understanding the causes of variations in life-history traits.

An Analysis Of QRS Interval Of The Electrocardiogram In ...

African Journals Online (AJOL)

Objectives: This cross-sectional study of the 12-lead electrocardiogram (ECG) was undertaken to establish the normal QRS interval of the adult Nigerian from Jos; to find significant correlation coefficients for QRS interval and the various anthropometric measurements and also to establish prediction equations for the QRS ...

High Intensity Interval Training for Maximizing Health Outcomes.

Science.gov (United States)

Karlsen, Trine; Aamot, Inger-Lise; Haykowsky, Mark; Rognmo, Øivind

Regular physical activity and exercise training are important actions to improve cardiorespiratory fitness and maintain health throughout life. There is solid evidence that exercise is an effective preventative strategy against at least 25 medical conditions, including cardiovascular disease, stroke, hypertension, colon and breast cancer, and type 2 diabetes. Traditionally, endurance exercise training (ET) to improve health related outcomes has consisted of low- to moderate ET intensity. However, a growing body of evidence suggests that higher exercise intensities may be superior to moderate intensity for maximizing health outcomes. The primary objective of this review is to discuss how aerobic high-intensity interval training (HIIT) as compared to moderate continuous training may maximize outcomes, and to provide practical advices for successful clinical and home-based HIIT. Copyright © 2017. Published by Elsevier Inc.

Global Precipitation Measurement (GPM) Mission: Precipitation Processing System (PPS) GPM Mission Gridded Text Products Provide Surface Precipitation Retrievals

Science.gov (United States)

Stocker, Erich Franz; Kelley, O.; Kummerow, C.; Huffman, G.; Olson, W.; Kwiatkowski, J.

2015-01-01

In February 2015, the Global Precipitation Measurement (GPM) mission core satellite will complete its first year in space. The core satellite carries a conically scanning microwave imager called the GPM Microwave Imager (GMI), which also has 166 GHz and 183 GHz frequency channels. The GPM core satellite also carries a dual frequency radar (DPR) which operates at Ku frequency, similar to the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar, and a new Ka frequency. The precipitation processing system (PPS) is producing swath-based instantaneous precipitation retrievals from GMI, both radars including a dual-frequency product, and a combined GMIDPR precipitation retrieval. These level 2 products are written in the HDF5 format and have many additional parameters beyond surface precipitation that are organized into appropriate groups. While these retrieval algorithms were developed prior to launch and are not optimal, these algorithms are producing very creditable retrievals. It is appropriate for a wide group of users to have access to the GPM retrievals. However, for researchers requiring only surface precipitation, these L2 swath products can appear to be very intimidating and they certainly do contain many more variables than the average researcher needs. Some researchers desire only surface retrievals stored in a simple easily accessible format. In response, PPS has begun to produce gridded text based products that contain just the most widely used variables for each instrument (surface rainfall rate, fraction liquid, fraction convective) in a single line for each grid box that contains one or more observations.This paper will describe the gridded data products that are being produced and provide an overview of their content. Currently two types of gridded products are being produced: (1) surface precipitation retrievals from the core satellite instruments GMI, DPR, and combined GMIDPR (2) surface precipitation retrievals for the partner constellation

The different effects of high intensity interval training and moderate intensity interval training for weightlessness countermeasures

Science.gov (United States)

Wang, Lin-Jie; Cheng, Tan; Zhi-Li, Li; Hui-juan, Wang; Wen-juan, Chen; Jianfeng, Zhang; Desheng, Wang; Dongbin, Niu; Qi, Zhao; Chengjia, Yang; Yanqing, Wang

High intensity interval training (HIIT) has been demonstrated to improve performance in a relatively short training period. But the difference between high intensity interval training and moderate intensity interval training (MIIT) in simulated weightlessness still has not been well studied. This study sought to characterize the difference between 6 weeks high intensity interval training and moderate intensity interval training under reduced weight (RW) gait training device and zero-gravity locomotion system (ZLS). Twenty-three subjects (14M/4F, 32.5±4.5 years) volunteered to participate. They were divided into three groups, that were MITT (alternating 2 min at 40% VO _{2} peak and 2 min at 60% VO _{2} peak for 30min, five days per week) RW group (n=8), HITT (alternating 2 min at 40% VO _{2} peak and 2 min at 90% VO _{2} peak for 30min, three days per week) RW group (n=8) and HITT ZLS group (n=7). The Z-axis load used in RW group was 80% body weight (BW) and in ZLS was 100% BW. Cardiopulmonary function was measured before, after 4-week training and after 6-week training. Isokinetic knee extension-flexion test at 60(°) deg/s and 180(°) deg/s were performed before and after the 6-week training, and isometric knee extension-flexion test at 180(°) deg/s was also examined at the same time. It was found that the VO _{2} peaks, metabolic equivalent (MET), Speedmax and respiratory exchange ratio (RER) were significantly increased after 4 and 6-week training in all three groups and no significant group difference were detected. The peak torque at 60(°) deg/s for right knee flexion were significantly increased after 6 week-training in all three groups, and only in HITT RW group the total power at 60(°) deg/s for right knee flexion enhanced. The total power and average power at 60(°) deg/s for right knee extension decreased significantly after 6-week training in all three groups. The peak torque at 60(°) deg/s for right knee extension in MIIT RW group was

Evaluation of test intervals strategies with a risk monitor

International Nuclear Information System (INIS)

Soerman, J.

2005-01-01

The Swedish nuclear power utility Oskarshamn Power Group (OKG), is investigating how the use of a risk monitor can facilitate and improve risk-informed decision-making at their nuclear power plants. The intent is to evaluate if risk-informed decision-making can be accepted. A pilot project was initiated and carried out in 2004. The project included investigating if a risk monitor can be used for optimising test intervals for diesel- and gas turbine generators with regard to risk level. The Oskarhamn 2 (O2), PSA Level 1 model was converted into a risk monitor using RiskSpectrum RiskWatcher (RSRW) software. The converted PSA model included the complete PSA model for the power operation mode. RSRW then performs a complete requantification for every analysis. Time dependent reliability data are taken into account, i.e. a shorter test interval will increases the components availability (possibility to e.g. start on demand). The converted O2 model was then used to investigate whether it would be possible to balance longer test intervals for diesel generators, gas turbine generators and high pressure injection system with shorter test intervals for the low pressure injection system, while maintaining a low risk level at the plant. The results show that a new mixture of test intervals can be implemented with only marginally changes in the risk calculated with the risk monitor model. The results indicate that the total number of test activities for the systems included in the pilot study could be reduced by 20% with a maintained level of risk. A risk monitor taking into account the impact from test intervals in availability calculations for components is well suited for evaluation of test interval strategies. It also enables the analyst to evaluate the risk level over a period of time including the impact the actual status of the plant may have on the risk level. (author)

Nonparametric Estimation of Interval Reliability for Discrete-Time Semi-Markov Systems

DEFF Research Database (Denmark)

Georgiadis, Stylianos; Limnios, Nikolaos

2016-01-01

In this article, we consider a repairable discrete-time semi-Markov system with finite state space. The measure of the interval reliability is given as the probability of the system being operational over a given finite-length time interval. A nonparametric estimator is proposed for the interval...

Interval Continuous Plant Identification from Value Sets

Directory of Open Access Journals (Sweden)

R. Hernández

2012-01-01

Full Text Available This paper shows how to obtain the values of the numerator and denominator Kharitonov polynomials of an interval plant from its value set at a given frequency. Moreover, it is proven that given a value set, all the assigned polynomials of the vertices can be determined if and only if there is a complete edge or a complete arc lying on a quadrant. This algorithm is nonconservative in the sense that if the value-set boundary of an interval plant is exactly known, and particularly its vertices, then the Kharitonov rectangles are exactly those used to obtain these value sets.

Multilayer perceptron for robust nonlinear interval regression analysis using genetic algorithms.

Science.gov (United States)

Hu, Yi-Chung

2014-01-01

On the basis of fuzzy regression, computational models in intelligence such as neural networks have the capability to be applied to nonlinear interval regression analysis for dealing with uncertain and imprecise data. When training data are not contaminated by outliers, computational models perform well by including almost all given training data in the data interval. Nevertheless, since training data are often corrupted by outliers, robust learning algorithms employed to resist outliers for interval regression analysis have been an interesting area of research. Several approaches involving computational intelligence are effective for resisting outliers, but the required parameters for these approaches are related to whether the collected data contain outliers or not. Since it seems difficult to prespecify the degree of contamination beforehand, this paper uses multilayer perceptron to construct the robust nonlinear interval regression model using the genetic algorithm. Outliers beyond or beneath the data interval will impose slight effect on the determination of data interval. Simulation results demonstrate that the proposed method performs well for contaminated datasets.

How to regress and predict in a Bland-Altman plot? Review and contribution based on tolerance intervals and correlated-errors-in-variables models.

Science.gov (United States)

Francq, Bernard G; Govaerts, Bernadette

2016-06-30

Two main methodologies for assessing equivalence in method-comparison studies are presented separately in the literature. The first one is the well-known and widely applied Bland-Altman approach with its agreement intervals, where two methods are considered interchangeable if their differences are not clinically significant. The second approach is based on errors-in-variables regression in a classical (X,Y) plot and focuses on confidence intervals, whereby two methods are considered equivalent when providing similar measures notwithstanding the random measurement errors. This paper reconciles these two methodologies and shows their similarities and differences using both real data and simulations. A new consistent correlated-errors-in-variables regression is introduced as the errors are shown to be correlated in the Bland-Altman plot. Indeed, the coverage probabilities collapse and the biases soar when this correlation is ignored. Novel tolerance intervals are compared with agreement intervals with or without replicated data, and novel predictive intervals are introduced to predict a single measure in an (X,Y) plot or in a Bland-Atman plot with excellent coverage probabilities. We conclude that the (correlated)-errors-in-variables regressions should not be avoided in method comparison studies, although the Bland-Altman approach is usually applied to avert their complexity. We argue that tolerance or predictive intervals are better alternatives than agreement intervals, and we provide guidelines for practitioners regarding method comparison studies. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Retention interval affects visual short-term memory encoding.

Science.gov (United States)

Bankó, Eva M; Vidnyánszky, Zoltán

2010-03-01

Humans can efficiently store fine-detailed facial emotional information in visual short-term memory for several seconds. However, an unresolved question is whether the same neural mechanisms underlie high-fidelity short-term memory for emotional expressions at different retention intervals. Here we show that retention interval affects the neural processes of short-term memory encoding using a delayed facial emotion discrimination task. The early sensory P100 component of the event-related potentials (ERP) was larger in the 1-s interstimulus interval (ISI) condition than in the 6-s ISI condition, whereas the face-specific N170 component was larger in the longer ISI condition. Furthermore, the memory-related late P3b component of the ERP responses was also modulated by retention interval: it was reduced in the 1-s ISI as compared with the 6-s condition. The present findings cannot be explained based on differences in sensory processing demands or overall task difficulty because there was no difference in the stimulus information and subjects' performance between the two different ISI conditions. These results reveal that encoding processes underlying high-precision short-term memory for facial emotional expressions are modulated depending on whether information has to be stored for one or for several seconds.

Dynamic Properties of QT Intervals

Czech Academy of Sciences Publication Activity Database

Halámek, Josef; Jurák, Pavel; Vondra, Vlastimil; Lipoldová, J.; Leinveber, Pavel; Plachý, M.; Fráňa, P.; Kára, T.

2009-01-01

Roč. 36, - (2009), s. 517-520 ISSN 0276-6574 R&D Projects: GA ČR GA102/08/1129; GA MŠk ME09050 Institutional research plan: CEZ:AV0Z20650511 Keywords : QT Intervals * arrhythmia diagnosis Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering http://cinc.mit.edu/archives/2009/pdf/0517.pdf

HIV intertest interval among MSM in King County, Washington.

Science.gov (United States)

Katz, David A; Dombrowski, Julia C; Swanson, Fred; Buskin, Susan E; Golden, Matthew R; Stekler, Joanne D

2013-02-01

The authors examined temporal trends and correlates of HIV testing frequency among men who have sex with men (MSM) in King County, Washington. The authors evaluated data from MSM testing for HIV at the Public Health-Seattle & King County (PHSKC) STD Clinic and Gay City Health Project (GCHP) and testing history data from MSM in PHSKC HIV surveillance. The intertest interval (ITI) was defined as the number of days between the last negative HIV test and the current testing visit or first positive test. Correlates of the log(10)-transformed ITI were determined using generalised estimating equations linear regression. Between 2003 and 2010, the median ITI among MSM seeking HIV testing at the STD Clinic and GCHP were 215 (IQR: 124-409) and 257 (IQR: 148-503) days, respectively. In multivariate analyses, younger age, having only male partners and reporting ≥10 male sex partners in the last year were associated with shorter ITIs at both testing sites (pGCHP attendees, having a regular healthcare provider, seeking a test as part of a regular schedule and inhaled nitrite use in the last year were also associated with shorter ITIs (pGCHP (median 359 vs 255 days, p=0.02). Although MSM in King County appear to be testing at frequent intervals, further efforts are needed to reduce the time that HIV-infected persons are unaware of their status.

Surface self-potential patterns related to transmissive fracture trends during a water injection test

Science.gov (United States)

DesRoches, A. J.; Butler, K. E.; MacQuarrie, K. TB

2018-03-01

Variations in self-potential (SP) signals were recorded over an electrode array during a constant head injection test in a fractured bedrock aquifer. Water was injected into a 2.2 m interval isolated between two inflatable packers at 44 m depth in a vertical well. Negative SP responses were recorded on surface corresponding to the start of the injection period with strongest magnitudes recorded in electrodes nearest the well. SP response decreased in magnitude at electrodes further from the well. Deflation of the packer system resulted in a strong reversal in the SP signal. Anomalous SP patterns observed at surface at steady state were found to be aligned with dominant fracture strike orientations found within the test interval. Numerical modelling of fluid and current flow within a simplified fracture network showed that azimuthal patterns in SP are mainly controlled by transmissive fracture orientations. The strongest SP gradients occur parallel to hydraulic gradients associated with water flowing out of the transmissive fractures into the tighter matrix and other less permeable cross-cutting fractures. Sensitivity studies indicate that increasing fracture frequency near the well increases the SP magnitude and enhances the SP anomaly parallel to the transmissive set. Decreasing the length of the transmissive fractures leads to more fluid flow into the matrix and into cross-cutting fractures proximal to the well, resulting in a more circular and higher magnitude SP anomaly. Results from the field experiment and modelling provide evidence that surface-based SP monitoring during constant head injection tests has the ability to identify groundwater flow pathways within a fractured bedrock aquifer.

An approach to solve group-decision-making problems with ordinal interval numbers.

Science.gov (United States)

Fan, Zhi-Ping; Liu, Yang

2010-10-01

The ordinal interval number is a form of uncertain preference information in group decision making (GDM), while it is seldom discussed in the existing research. This paper investigates how the ranking order of alternatives is determined based on preference information of ordinal interval numbers in GDM problems. When ranking a large quantity of ordinal interval numbers, the efficiency and accuracy of the ranking process are critical. A new approach is proposed to rank alternatives using ordinal interval numbers when every ranking ordinal in an ordinal interval number is thought to be uniformly and independently distributed in its interval. First, we give the definition of possibility degree on comparing two ordinal interval numbers and the related theory analysis. Then, to rank alternatives, by comparing multiple ordinal interval numbers, a collective expectation possibility degree matrix on pairwise comparisons of alternatives is built, and an optimization model based on this matrix is constructed. Furthermore, an algorithm is also presented to rank alternatives by solving the model. Finally, two examples are used to illustrate the use of the proposed approach.

Voltage interval mappings for an elliptic bursting model

OpenAIRE

Wojcik, Jeremy; Shilnikov, Andrey

2013-01-01

We employed Poincar\\'e return mappings for a parameter interval to an exemplary elliptic bursting model, the FitzHugh-Nagumo-Rinzel model. Using the interval mappings, we were able to examine in detail the bifurcations that underlie the complex activity transitions between: tonic spiking and bursting, bursting and mixed-mode oscillations, and finally, mixed-mode oscillations and quiescence in the FitzHugh-Nagumo-Rinzel model. We illustrate the wealth of information, qualitative and quantitati...

Concept of Operations for Interval Management Arrivals and Approach

Science.gov (United States)

Hicok, Daniel S.; Barmore, Bryan E.

2016-01-01

This paper presents the concept of operations for interval management operations to be deployed in the US National Airspace System (NAS) by the Federal Aviation Administration (FAA) after 2020. The use of interval management operations is described that begin in en route airspace and continue to a termination point inside the arrival terminal area, in a terminal environment that includes other arrival management tools such as arrival metering, Ground-based Interval Management - Spacing (GIM-S), and Terminal Sequencing and Spacing (TSAS). The roles of Air Traffic Controllers and Flight Crews and the ground automation tools that are used by Air Traffic Controllers to enable the primary operation and variations are described.

Time interval approach to the pulsed neutron logging method

International Nuclear Information System (INIS)

Zhao Jingwu; Su Weining

1994-01-01

The time interval of neighbouring neutrons emitted from a steady state neutron source can be treated as that from a time-dependent neutron source. In the rock space, the neutron flux is given by the neutron diffusion equation and is composed of an infinite terms. Each term s composed of two die-away curves. The delay action is discussed and used to measure the time interval with only one detector in the experiment. Nuclear reactions with the time distribution due to different types of radiations observed in the neutron well-logging methods are presented with a view to getting the rock nuclear parameters from the time interval technique

The relationship between quality of sleep and night shift rotation interval.

Science.gov (United States)

Kim, Jae Youn; Chae, Chang Ho; Kim, Young Ouk; Son, Jun Seok; Kim, Ja Hyun; Kim, Chan Woo; Park, Hyoung Ouk; Lee, Jun Ho; Kwon, Soon Il; Kwon, Sun Il

2015-01-01

Shift work is closely related with workers' health. In particular, sleep is thought to be affected by shift work. In addition, shift work has been reported to be associated with the type or direction of shift rotation, number of consecutive night shifts, and number of off-duty days. We aimed to analyze the association between the night shift rotation interval and the quality of sleep reported by Korean female shift workers. In total, 2,818 female shift workers from the manufacturing industry who received an employee physical examination at a single university hospital from January to August in 2014 were included. Subjects were classified into three groups (A, B, and C) by their night shift rotation interval. The quality of sleep was measured using the Korean version of the Pittsburgh Sleep Quality Index (PSQI). Descriptive analysis, univariate logistic regression, and multivariate logistic regression were performed. With group A as the reference, the odds ratio (OR) for having a seriously low quality of sleep was 1.456 (95% CI 1.171-1.811) and 2.348 (95% CI 1.852-2.977) for groups B and C, respectively. Thus, group C with the shortest night shift rotation interval was most likely to have a low quality of sleep. After adjustment for age, obesity, smoking status, alcohol consumption, exercise, being allowed to sleep during night shifts, work experience, and shift work experience, groups B and C had ORs of 1.419 (95% CI 1.134-1.777) and 2.238 (95% CI 1.737-2.882), respectively, compared to group A. Our data suggest that a shorter night shift rotation interval does not provide enough recovery time to adjust the circadian rhythm, resulting in a low quality of sleep. Because shift work is influenced by many different factors, future studies should aim to determine the most optimal shift work model and collect accurate, prospective data.

Measures to reduce glyphosate runoff from hard surfaces, 2: effect of time interval between application and first precipitation event

NARCIS (Netherlands)

Luijendijk, C.D.; Beltman, W.H.J.; Smidt, R.A.; Pas, van der L.J.T.; Kempenaar, C.

2005-01-01

In this research the effect of moisture conditions of hard surfaces on emission of herbicides from hard surfaces was quantified. In addition the dissipation of glyphosate applied on brick-pavement is determined in time. The outdoor experiment was carried out on 3 and 17 June 2003. In previous

Interval timing under a behavioral microscope: Dissociating motivational and timing processes in fixed-interval performance.

Science.gov (United States)

Daniels, Carter W; Sanabria, Federico

2017-03-01

The distribution of latencies and interresponse times (IRTs) of rats was compared between two fixed-interval (FI) schedules of food reinforcement (FI 30 s and FI 90 s), and between two levels of food deprivation. Computational modeling revealed that latencies and IRTs were well described by mixture probability distributions embodying two-state Markov chains. Analysis of these models revealed that only a subset of latencies is sensitive to the periodicity of reinforcement, and prefeeding only reduces the size of this subset. The distribution of IRTs suggests that behavior in FI schedules is organized in bouts that lengthen and ramp up in frequency with proximity to reinforcement. Prefeeding slowed down the lengthening of bouts and increased the time between bouts. When concatenated, latency and IRT models adequately reproduced sigmoidal FI response functions. These findings suggest that behavior in FI schedules fluctuates in and out of schedule control; an account of such fluctuation suggests that timing and motivation are dissociable components of FI performance. These mixture-distribution models also provide novel insights on the motivational, associative, and timing processes expressed in FI performance. These processes may be obscured, however, when performance in timing tasks is analyzed in terms of mean response rates.

Correlation of prolonged QT interval and severity of cirrhosis of liver

International Nuclear Information System (INIS)

Tarique, S.; Sarwar, S.

2011-01-01

To determine correlation between prolonged QT interval and severity of disease in patients of cirrhosis of liver. Study Design: Descriptive cross sectional study. Patients and Methods: One hundred and seventeen patients of cirrhosis were included. Baseline haematological and biochemical parameters were determined. Model for end stage liver disease (MELD) score was determined for all patients to document stage of liver disease. Corrected QT interval was determined from electrocardiography of each patient using QT cirrhosis formula. Correlation between QT interval and MELD score was determined using Pearson correlation and Receiver Operating Characteristic (ROC) curve. Results: One hundred and seventeen included patients had mean age of 53.58 (+- 12.11) while male to female ratio was 1.78/1 (75 / 42). Mean MELD score was 17.08 (+- 6.54) in study patients varying between 6 and 37 while mean corrected QT interval was 0.44 seconds (+- 0.06). Pearson correlation revealed no significant relation between severity of liver disease as determined with MELD score and prolonged QT interval (p value 0.18) Area under curve with ROC curve for correlation between prolonged QT interval and severity of liver disease was 0.42. Conclusion: Prolonged QT interval is not an indicator of severity of disease in cirrhosis of liver. (author)

Sensitivity of Distributions of Climate System Properties to Surface Temperature Datasets

Science.gov (United States)

Libardoni, A. G.; Forest, C. E.

2011-12-01

Predictions of climate change from models depend strongly on the representation of climate system properties emerging from the processes and feedbacks in the models. The quality of any model prediction can be evaluated by determining how well its output reproduces the observed climate system. With this evaluation, the reliability of climate projections derived from the model and provided for policy makers is assessed and quantified. In this study, surface temperature, upper-air temperature, and ocean heat content data are used to constrain the distributions of the parameters that define three climate system properties in the MIT Integrated Global Systems Model: climate sensitivity, the rate of ocean heat uptake into the deep ocean, and net anthropogenic aerosol forcing. In particular, we explore the sensitivity of the distributions to the surface temperature dataset used to estimate the likelihood of model output given the observed climate records. In total, five different reconstructions of past surface temperatures are used and the resulting parameter distribution functions differ from each other. Differences in estimates of climate sensitivity mode and mean are as great as 1 K between the datasets, with an overall range of 1.2 to 5.3 K using the 5-95 confidence intervals. Ocean effective diffusivity is poorly constrained regardless of which dataset is used. All distributions show broad distributions and only three show signs of a distribution mode. When a mode is present, they tend to be for low diffusivity values. Distributions for the net aerosol forcing show similar shapes and cluster into two groups that are shifted by approximately 0.1 watts per square meter. However, the overall spread of forcing values from the 5-95 confidence interval, -0.19 to -0.83 watts per square meter, is small compared to other uncertainties in climate forcings. Transient climate response estimates derived from these distributions range between 0.87 and 2.41 K. Similar to the

Application of Interval Arithmetic in the Evaluation of Transfer Capabilities by Considering the Sources of Uncertainty

Directory of Open Access Journals (Sweden)

Prabha Umapathy

2009-01-01

Full Text Available Total transfer capability (TTC is an important index in a power system with large volume of inter-area power exchanges. This paper proposes a novel technique to determine the TTC and its confidence intervals in the system by considering the uncertainties in the load and line parameters. The optimal power flow (OPF method is used to obtain the TTC. Variations in the load and line parameters are incorporated using the interval arithmetic (IA method. The IEEE 30 bus test system is used to illustrate the proposed methodology. Various uncertainties in the line, load and both line and load are incorporated in the evaluation of total transfer capability. From the results, it is observed that the solutions obtained through the proposed method provide much wider information in terms of closed interval form which is more useful in ensuring secured operation of the interconnected system in the presence of uncertainties in load and line parameters.

Reference intervals for serum total cholesterol, HDL cholesterol and ...

African Journals Online (AJOL)

Reference intervals of total cholesterol, HDL cholesterol and non-HDL cholesterol concentrations were determined on 309 blood donors from an urban and peri-urban population of Botswana. Using non-parametric methods to establish 2.5th and 97.5th percentiles of the distribution, the intervals were: total cholesterol 2.16 ...

Psychological and behavioral responses to interval and continuous exercise.

Science.gov (United States)

Stork, Matthew J; Gibala, Martin J; Martin Ginis, Kathleen A

2018-05-16

To compare psychological responses to, and preferences for, moderate-intensity continuous training (MICT), high-intensity interval training (HIIT), and sprint interval training (SIT) among inactive adults; and to investigate the relationships between affect, enjoyment, exercise preferences, and subsequent exercise behavior over a 4-wk follow-up period. Thirty inactive men and women (21.23±3.81 y), inexperienced with HIIT or SIT, completed three trials of cycle ergometer exercise in random order on separate days: MICT (45min continuous; ~70-75% of heart rate maximum (HRmax)); HIIT (10x1 min bouts at ~85-90%HRmax with 1-min recovery periods); and SIT (3x20-s "all-out" sprints with 2-min recovery periods). Perceived exertion (RPE), affect, and arousal were measured throughout the trials and enjoyment was measured post-exercise. Participants rank-ordered the protocols (#1-3) according to preference and logged their exercise over a 4-week follow-up. Despite elevated HR, RPE, and arousal during work periods (psHIIT and SIT, enjoyment and preferences for MICT, HIIT, and SIT were similar (ps>0.05). In-task affect was predictive of post-exercise enjoyment for each type of exercise (rs=0.32 to 0.47; psHIIT and SIT (rss=-0.34 to -0.61; ps0.05), respectively. Over the follow-up, participants completed more MICT (M=6.11±4.12) than SIT sessions (M=1.39±1.85; pHIIT (M=3.54±4.23; p=0.16, d=0.56), and more sessions of HIIT than SIT (p=0.07, d=0.60), differences were not significant. In-task affect predicted the number of sessions of MICT (r=0.40; pHIIT or SIT (ps>0.05). This study provides new evidence that a single session of HIIT and SIT can be as enjoyable and preferable as MICT among inactive individuals and that there may be differences in the exercise affect-behavior relationship between interval and continuous exercise.

A Statistical Approach for Interval Forecasting of the Electricity Price

DEFF Research Database (Denmark)

Zhao, Jun Hua; Dong, Zhao Yang; Xu, Zhao

2008-01-01

the prediction interval is essential for estimating the uncertainty involved in the price and thus is highly useful for making generation bidding strategies and investment decisions. In this paper, a novel data mining-based approach is proposed to achieve two major objectives: 1) to accurately forecast the value......Electricity price forecasting is a difficult yet essential task for market participants in a deregulated electricity market. Rather than forecasting the value, market participants are sometimes more interested in forecasting the prediction interval of the electricity price. Forecasting...... of the electricity price series, which is widely accepted as a nonlinear time series; 2) to accurately estimate the prediction interval of the electricity price series. In the proposed approach, support vector machine (SVM) is employed to forecast the value of the price. To forecast the prediction interval, we...

Time-variant random interval natural frequency analysis of structures

Science.gov (United States)

Wu, Binhua; Wu, Di; Gao, Wei; Song, Chongmin

2018-02-01

This paper presents a new robust method namely, unified interval Chebyshev-based random perturbation method, to tackle hybrid random interval structural natural frequency problem. In the proposed approach, random perturbation method is implemented to furnish the statistical features (i.e., mean and standard deviation) and Chebyshev surrogate model strategy is incorporated to formulate the statistical information of natural frequency with regards to the interval inputs. The comprehensive analysis framework combines the superiority of both methods in a way that computational cost is dramatically reduced. This presented method is thus capable of investigating the day-to-day based time-variant natural frequency of structures accurately and efficiently under concrete intrinsic creep effect with probabilistic and interval uncertain variables. The extreme bounds of the mean and standard deviation of natural frequency are captured through the embedded optimization strategy within the analysis procedure. Three particularly motivated numerical examples with progressive relationship in perspective of both structure type and uncertainty variables are demonstrated to justify the computational applicability, accuracy and efficiency of the proposed method.

[Primary Study on Predicting the Termination of Paroxysmal Atrial Fibrillation Based on a Novel RdR RR Intervals Scatter Plot].

Science.gov (United States)

Lu, Hongwei; Zhang, Chenxi; Sun, Ying; Hao, Zhidong; Wang, Chunfang; Tian, Jiajia

2015-08-01

Predicting the termination of paroxysmal atrial fibrillation (AF) may provide a signal to decide whether there is a need to intervene the AF timely. We proposed a novel RdR RR intervals scatter plot in our study. The abscissa of the RdR scatter plot was set to RR intervals and the ordinate was set as the difference between successive RR intervals. The RdR scatter plot includes information of RR intervals and difference between successive RR intervals, which captures more heart rate variability (HRV) information. By RdR scatter plot analysis of one minute RR intervals for 50 segments with non-terminating AF and immediately terminating AF, it was found that the points in RdR scatter plot of non-terminating AF were more decentralized than the ones of immediately terminating AF. By dividing the RdR scatter plot into uniform grids and counting the number of non-empty grids, non-terminating AF and immediately terminating AF segments were differentiated. By utilizing 49 RR intervals, for 20 segments of learning set, 17 segments were correctly detected, and for 30 segments of test set, 20 segments were detected. While utilizing 66 RR intervals, for 18 segments of learning set, 16 segments were correctly detected, and for 28 segments of test set, 20 segments were detected. The results demonstrated that during the last one minute before the termination of paroxysmal AF, the variance of the RR intervals and the difference of the neighboring two RR intervals became smaller. The termination of paroxysmal AF could be successfully predicted by utilizing the RdR scatter plot, while the predicting accuracy should be further improved.

Effect of interval training programme on pulse pressure in the ...

African Journals Online (AJOL)

African Health Sciences ... The exercise (work: rest ratio of 1:1) groups involved in an 8-weeks interval training programs of ... Conclusion: Moderate intensity interval training programs is effective in the non-pharmacological management of

The establishment of tocopherol reference intervals for Hungarian adult population using a validated HPLC method.

Science.gov (United States)

Veres, Gábor; Szpisjak, László; Bajtai, Attila; Siska, Andrea; Klivényi, Péter; Ilisz, István; Földesi, Imre; Vécsei, László; Zádori, Dénes

2017-09-01

Evidence suggests that decreased α-tocopherol (the most biologically active substance in the vitamin E group) level can cause neurological symptoms, most likely ataxia. The aim of the current study was to first provide reference intervals for serum tocopherols in the adult Hungarian population with appropriate sample size, recruiting healthy control subjects and neurological patients suffering from conditions without symptoms of ataxia, myopathy or cognitive deficiency. A validated HPLC method applying a diode array detector and rac-tocol as internal standard was utilized for that purpose. Furthermore, serum cholesterol levels were determined as well for data normalization. The calculated 2.5-97.5% reference intervals for α-, β/γ- and δ-tocopherols were 24.62-54.67, 0.81-3.69 and 0.29-1.07 μm, respectively, whereas the tocopherol/cholesterol ratios were 5.11-11.27, 0.14-0.72 and 0.06-0.22 μmol/mmol, respectively. The establishment of these reference intervals may improve the diagnostic accuracy of tocopherol measurements in certain neurological conditions with decreased tocopherol levels. Moreover, the current study draws special attention to the possible pitfalls in the complex process of the determination of reference intervals as well, including the selection of study population, the application of internal standard and method validation and the calculation of tocopherol/cholesterol ratios. Copyright © 2017 John Wiley & Sons, Ltd.

A model of interval timing by neural integration.

Science.gov (United States)

Simen, Patrick; Balci, Fuat; de Souza, Laura; Cohen, Jonathan D; Holmes, Philip

2011-06-22

We show that simple assumptions about neural processing lead to a model of interval timing as a temporal integration process, in which a noisy firing-rate representation of time rises linearly on average toward a response threshold over the course of an interval. Our assumptions include: that neural spike trains are approximately independent Poisson processes, that correlations among them can be largely cancelled by balancing excitation and inhibition, that neural populations can act as integrators, and that the objective of timed behavior is maximal accuracy and minimal variance. The model accounts for a variety of physiological and behavioral findings in rodents, monkeys, and humans, including ramping firing rates between the onset of reward-predicting cues and the receipt of delayed rewards, and universally scale-invariant response time distributions in interval timing tasks. It furthermore makes specific, well-supported predictions about the skewness of these distributions, a feature of timing data that is usually ignored. The model also incorporates a rapid (potentially one-shot) duration-learning procedure. Human behavioral data support the learning rule's predictions regarding learning speed in sequences of timed responses. These results suggest that simple, integration-based models should play as prominent a role in interval timing theory as they do in theories of perceptual decision making, and that a common neural mechanism may underlie both types of behavior.

Controllable superhydrophobic aluminum surfaces with tunable adhesion fabricated by femtosecond laser

Science.gov (United States)

Song, Yuxin; Wang, Cong; Dong, Xinran; Yin, Kai; Zhang, Fan; Xie, Zheng; Chu, Dongkai; Duan, Ji'an

2018-06-01

In this study, a facile and detailed strategy to fabricate superhydrophobic aluminum surfaces with controllable adhesion by femtosecond laser ablation is presented. The influences of key femtosecond laser processing parameters including the scanning speed, laser power and interval on the wetting properties of the laser-ablated surfaces are investigated. It is demonstrated that the adhesion between water and superhydrophobic surface can be effectively tuned from extremely low adhesion to high adhesion by adjusting laser processing parameters. At the same time, the mechanism is discussed for the changes of the wetting behaviors of the laser-ablated surfaces. These superhydrophobic surfaces with tunable adhesion have many potential applications, such as self-cleaning surface, oil-water separation, anti-icing surface and liquid transportation.

The new fabrication method of standard surface sources

Energy Technology Data Exchange (ETDEWEB)

Sato, Yasushi E-mail: yss.sato@aist.go.jp; Hino, Yoshio; Yamada, Takahiro; Matsumoto, Mikio

2004-04-01

We developed a new fabrication method for standard surface sources by using an inkjet printer with inks in which a radioactive material is mixed to print on a sheet of paper. Three printed test patterns have been prepared: (1) 100 mmx100 mm uniformity-test patterns, (2) positional-resolution test patterns with different widths and intervals of straight lines, and (3) logarithmic intensity test patterns with different radioactive intensities. The results revealed that the fabricated standard surface sources had high uniformity, high positional resolution, arbitrary shapes and a broad intensity range.

Entyvio lengthen dose-interval study: lengthening vedolizumab dose interval and the risk of clinical relapse in inflammatory bowel disease.

Science.gov (United States)

Chan, Webber; Lynch, Nicole; Bampton, Peter; Chang, Jeff; Chung, Alvin; Florin, Timothy; Hetzel, David J; Jakobovits, Simon; Moore, Gregory; Pavli, Paul; Radford-Smith, Graham; Thin, Lena; Baraty, Brandon; Haifer, Craig; Yau, Yunki; Leong, Rupert W L

2018-07-01

Vedolizumab (VDZ), an α4β7 anti-integrin antibody, is efficacious in the induction and maintenance of remission in ulcerative colitis (UC) and Crohn's disease (CD). In the GEMINI long-term safety study, enrolled patients received 4-weekly VDZ. Upon completion, patients were switched to 8-weekly VDZ in Australia. The clinical success rate of treatment de-escalation for patients in remission on VDZ has not been described previously. To determine the proportion of patients who relapsed after switching from 4 to 8-weekly VDZ, the mean time to relapse, and the recapture rate when switching back to 8-weekly dosing. This was a retrospective, observational, multicenter study of patients previously recruited into GEMINI long-term safety in Australia. Data on the demographics and biochemical findings were collected. There were 34 patients [23 men, mean age 49.1 (±13.1) years] and their mean disease duration was 17.6 (±8.5) years. The mean 4-weekly VDZ infusion duration was 286.5 (±48.8) weeks. A total of five (15%) patients relapsed on dose-interval increase (4/17 UC, 1/17 CD) at a median duration from dose interval lengthening to flare of 14 weeks (interquartile range=6-25). Eighty percent (4/5) of patients re-entered remission following dose-interval decrease back to 4-weekly. No clinical predictors of relapse could be determined because of the small cohort size. The risk of patients relapsing when switching from 4 to 8-weekly VDZ ∼15% and is similar between CD and UC. Dose-interval decrease recaptures 80% of patients who relapsed. Therapeutic drug monitoring of VDZ may be of clinical relevance.

Safety information on QT-interval prolongation

DEFF Research Database (Denmark)

Warnier, Miriam J; Holtkamp, Frank A; Rutten, Frans H

2014-01-01

Prolongation of the QT interval can predispose to fatal ventricular arrhythmias. Differences in QT-labeling language can result in miscommunication and suboptimal risk mitigation. We systematically compared the phraseology used to communicate on QT-prolonging properties of 144 drugs newly approve...

T(peak)T(end) interval in long QT syndrome

DEFF Research Database (Denmark)

Kanters, Jørgen Kim; Haarmark, Christian; Vedel-Larsen, Esben

2008-01-01

BACKGROUND: The T(peak)T(end) (T(p)T(e)) interval is believed to reflect the transmural dispersion of repolarization. Accordingly, it should be a risk factor in long QT syndrome (LQTS). The aim of the study was to determine the effect of genotype on T(p)T(e) interval and test whether it was relat...

Role of PR-Interval In Predicting the Occurrence of Atrial Fibrillation

DEFF Research Database (Denmark)

Bidstrup, Signe Brøker; Salling Olesen, Morten; Hastrup Svendsen, Jesper

2013-01-01

The identification of individuals at high risk of developing atrial fibrillation (AF) is important to prevent potentially lethal and invalidating complications of this arrhythmia. Recently, several studies have investigated the association between PR-interval and the risk of AF and have tested...... the value of PR-interval in personalized risk scores for AF. However, the results of these studies are generally conflicting. When looking for an association between a prolonged PR-interval (first-degree atrioventricular [AV] block vs. normal PR-interval) and an increased risk of AF, not all studies were...... able to find a consistent and statistically significant association. In two recent studies, however, the investigators were able to show an increased risk of AF for individuals with PR-intervals in the short range compared with individuals in the middle range. The existence of a true U...

Comparison of linear, skewed-linear, and proportional hazard models for the analysis of lambing interval in Ripollesa ewes.

Science.gov (United States)

Casellas, J; Bach, R

2012-06-01

Lambing interval is a relevant reproductive indicator for sheep populations under continuous mating systems, although there is a shortage of selection programs accounting for this trait in the sheep industry. Both the historical assumption of small genetic background and its unorthodox distribution pattern have limited its implementation as a breeding objective. In this manuscript, statistical performances of 3 alternative parametrizations [i.e., symmetric Gaussian mixed linear (GML) model, skew-Gaussian mixed linear (SGML) model, and piecewise Weibull proportional hazard (PWPH) model] have been compared to elucidate the preferred methodology to handle lambing interval data. More specifically, flock-by-flock analyses were performed on 31,986 lambing interval records (257.3 ± 0.2 d) from 6 purebred Ripollesa flocks. Model performances were compared in terms of deviance information criterion (DIC) and Bayes factor (BF). For all flocks, PWPH models were clearly preferred; they generated a reduction of 1,900 or more DIC units and provided BF estimates larger than 100 (i.e., PWPH models against linear models). These differences were reduced when comparing PWPH models with different number of change points for the baseline hazard function. In 4 flocks, only 2 change points were required to minimize the DIC, whereas 4 and 6 change points were needed for the 2 remaining flocks. These differences demonstrated a remarkable degree of heterogeneity across sheep flocks that must be properly accounted for in genetic evaluation models to avoid statistical biases and suboptimal genetic trends. Within this context, all 6 Ripollesa flocks revealed substantial genetic background for lambing interval with heritabilities ranging between 0.13 and 0.19. This study provides the first evidence of the suitability of PWPH models for lambing interval analysis, clearly discarding previous parametrizations focused on mixed linear models.

Prediction of small-for-gestational-age neonate by third-trimester fetal biometry and impact of ultrasound-delivery interval.

Science.gov (United States)

Reboul, Q; Delabaere, A; Luo, Z C; Nuyt, A-M; Wu, Y; Chauleur, C; Fraser, W; Audibert, F

2017-03-01

To compare third-trimester ultrasound screening methods to predict small-for-gestational age (SGA), and to evaluate the impact of the ultrasound-delivery interval on screening performance. In this prospective study, data were collected from a multicenter singleton cohort study investigating the links between various exposures during pregnancy with birth outcome and later health in children. We included women, recruited in the first trimester, who had complete outcome data and had undergone third-trimester ultrasound examination. Demographic, clinical and biological variables were also collected from both parents. We compared prediction of delivery of a SGA neonate (birth weight third trimesters (FGVAC). We also assessed the following ultrasound-delivery intervals: ≤ 4 weeks, ≤ 6 weeks and ≤ 10 weeks. Third-trimester ultrasound was performed in 1805 patients with complete outcome data, of whom 158 (8.8%) delivered a SGA neonate. Ultrasound examination was at a median gestational age of 32 (interquartile range, 31-33) weeks. The ultrasound-delivery interval was ≤ 4 weeks in 17.2% of cases, ≤ 6 weeks in 48.1% of cases and ≤ 10 weeks in 97.3% of cases. Areas under the receiver-operating characteristics curve (AUC) were 0.772 for Salomon AC, 0.768 for Hadlock EFW, 0.766 for Hadlock AC, 0.765 for Intergrowth AC, 0.708 for Gardosi EFW and 0.674 for FGVAC (all P Third-trimester ultrasound measurements provide poor to moderate prediction of SGA. A shorter ultrasound-delivery interval provides better prediction than does a longer interval. Further studies are needed to test the effect of including maternal or biological characteristics in SGA screening. Copyright © 2016 ISUOG. Published by John Wiley & Sons Ltd. Copyright © 2016 ISUOG. Published by John Wiley & Sons Ltd.

Dispersion durations of P-wave and QT interval in children treated with a ketogenic diet.

Science.gov (United States)

Doksöz, Önder; Güzel, Orkide; Yılmaz, Ünsal; Işgüder, Rana; Çeleğen, Kübra; Meşe, Timur

2014-04-01

Limited data are available on the effects of a ketogenic diet on dispersion duration of P-wave and QT-interval measures in children. We searched for the changes in these measures with serial electrocardiograms in patients treated with a ketogenic diet. Twenty-five drug-resistant patients with epilepsy treated with a ketogenic diet were enrolled in this study. Electrocardiography was performed in all patients before the beginning and at the sixth month after implementation of the ketogenic diet. Heart rate, maximum and minimum P-wave duration, P-wave dispersion, and maximum and minimum corrected QT interval and QT dispersion were manually measured from the 12-lead surface electrocardiogram. Minimum and maximum corrected QT and QT dispersion measurements showed nonsignificant increase at month 6 compared with baseline values. Other previously mentioned electrocardiogram parameters also showed no significant changes. A ketogenic diet of 6 months' duration has no significant effect on electrocardiogram parameters in children. Further studies with larger samples and longer duration of follow-up are needed to clarify the effects of ketogenic diet on P-wave dispersion and corrected QT and QT dispersion. Copyright © 2014 Elsevier Inc. All rights reserved.

Oscillatory dynamics of an intravenous glucose tolerance test model with delay interval

Science.gov (United States)

Shi, Xiangyun; Kuang, Yang; Makroglou, Athena; Mokshagundam, Sriprakash; Li, Jiaxu

2017-11-01

Type 2 diabetes mellitus (T2DM) has become prevalent pandemic disease in view of the modern life style. Both diabetic population and health expenses grow rapidly according to American Diabetes Association. Detecting the potential onset of T2DM is an essential focal point in the research of diabetes mellitus. The intravenous glucose tolerance test (IVGTT) is an effective protocol to determine the insulin sensitivity, glucose effectiveness, and pancreatic β-cell functionality, through the analysis and parameter estimation of a proper differential equation model. Delay differential equations have been used to study the complex physiological phenomena including the glucose and insulin regulations. In this paper, we propose a novel approach to model the time delay in IVGTT modeling. This novel approach uses two parameters to simulate not only both discrete time delay and distributed time delay in the past interval, but also the time delay distributed in a past sub-interval. Normally, larger time delay, either a discrete or a distributed delay, will destabilize the system. However, we find that time delay over a sub-interval might not. We present analytically some basic model properties, which are desirable biologically and mathematically. We show that this relatively simple model provides good fit to fluctuating patient data sets and reveals some intriguing dynamics. Moreover, our numerical simulation results indicate that our model may remove the defect in well known Minimal Model, which often overestimates the glucose effectiveness index.

Computing confidence and prediction intervals of industrial equipment degradation by bootstrapped support vector regression

International Nuclear Information System (INIS)

Lins, Isis Didier; Droguett, Enrique López; Moura, Márcio das Chagas; Zio, Enrico; Jacinto, Carlos Magno

2015-01-01

Data-driven learning methods for predicting the evolution of the degradation processes affecting equipment are becoming increasingly attractive in reliability and prognostics applications. Among these, we consider here Support Vector Regression (SVR), which has provided promising results in various applications. Nevertheless, the predictions provided by SVR are point estimates whereas in order to take better informed decisions, an uncertainty assessment should be also carried out. For this, we apply bootstrap to SVR so as to obtain confidence and prediction intervals, without having to make any assumption about probability distributions and with good performance even when only a small data set is available. The bootstrapped SVR is first verified on Monte Carlo experiments and then is applied to a real case study concerning the prediction of degradation of a component from the offshore oil industry. The results obtained indicate that the bootstrapped SVR is a promising tool for providing reliable point and interval estimates, which can inform maintenance-related decisions on degrading components. - Highlights: • Bootstrap (pairs/residuals) and SVR are used as an uncertainty analysis framework. • Numerical experiments are performed to assess accuracy and coverage properties. • More bootstrap replications does not significantly improve performance. • Degradation of equipment of offshore oil wells is estimated by bootstrapped SVR. • Estimates about the scale growth rate can support maintenance-related decisions

Some double sequence spaces of interval numbers defined by Orlicz function

Directory of Open Access Journals (Sweden)

Ayhan Esi

2014-10-01

Full Text Available In this paper we introduce some interval valued double sequence spaces defined by Orlicz function and study different properties of these spaces like inclusion relations, solidity, etc. We establish some inclusion relations among them. Also we introduce the concept of double statistical convergence for interval number sequences and give an inclusion relation between interval valued double sequence spaces.

Confidence intervals for experiments with background and small numbers of events

International Nuclear Information System (INIS)

Bruechle, W.

2003-01-01

Methods to find a confidence interval for Poisson distributed variables are illuminated, especially for the case of poor statistics. The application of 'central' and 'highest probability density' confidence intervals is compared for the case of low count-rates. A method to determine realistic estimates of the confidence intervals for Poisson distributed variables affected with background, and their ratios, is given. (orig.)

Confidence intervals for experiments with background and small numbers of events

International Nuclear Information System (INIS)

Bruechle, W.

2002-07-01

Methods to find a confidence interval for Poisson distributed variables are illuminated, especially for the case of poor statistics. The application of 'central' and 'highest probability density' confidence intervals is compared for the case of low count-rates. A method to determine realistic estimates of the confidence intervals for Poisson distributed variables affected with background, and their ratios, is given. (orig.)

Training contraceptive providers to offer intrauterine devices and implants in contraceptive care: a cluster randomized trial.

Science.gov (United States)

Thompson, Kirsten M J; Rocca, Corinne H; Stern, Lisa; Morfesis, Johanna; Goodman, Suzan; Steinauer, Jody; Harper, Cynthia C

2018-06-01

US unintended pregnancy rates remain high, and contraceptive providers are not universally trained to offer intrauterine devices and implants to women who wish to use these methods. We sought to measure the impact of a provider training intervention on integration of intrauterine devices and implants into contraceptive care. We measured the impact of a continuing medical education-accredited provider training intervention on provider attitudes, knowledge, and practices in a cluster randomized trial in 40 US health centers from 2011 through 2013. Twenty clinics were randomly assigned to the intervention arm; 20 offered routine care. Clinic staff participated in baseline and 1-year surveys assessing intrauterine device and implant knowledge, attitudes, and practices. We used a difference-in-differences approach to compare changes that occurred in the intervention sites to changes in the control sites 1 year later. Prespecified outcome measures included: knowledge of patient eligibility for intrauterine devices and implants; attitudes about method safety; and counseling practices. We used multivariable regression with generalized estimating equations to account for clustering by clinic to examine intervention effects on provider outcomes 1 year later. Overall, we surveyed 576 clinic staff (314 intervention, 262 control) at baseline and/or 1-year follow-up. The change in proportion of providers who believed that the intrauterine device was safe was greater in intervention (60% at baseline to 76% at follow-up) than control sites (66% at both times) (adjusted odds ratio, 2.48; 95% confidence interval, 1.13-5.4). Likewise, for the implant, the proportion increased from 57-77% in intervention, compared to 61-65% in control sites (adjusted odds ratio, 2.57; 95% confidence interval, 1.44-4.59). The proportion of providers who believed they were experienced to counsel on intrauterine devices also increased in intervention (53-67%) and remained the same in control sites (60

A measure of uncertainty regarding the interval constraint of normal mean elicited by two stages of a prior hierarchy.

Science.gov (United States)

Kim, Hea-Jung

2014-01-01

This paper considers a hierarchical screened Gaussian model (HSGM) for Bayesian inference of normal models when an interval constraint in the mean parameter space needs to be incorporated in the modeling but when such a restriction is uncertain. An objective measure of the uncertainty, regarding the interval constraint, accounted for by using the HSGM is proposed for the Bayesian inference. For this purpose, we drive a maximum entropy prior of the normal mean, eliciting the uncertainty regarding the interval constraint, and then obtain the uncertainty measure by considering the relationship between the maximum entropy prior and the marginal prior of the normal mean in HSGM. Bayesian estimation procedure of HSGM is developed and two numerical illustrations pertaining to the properties of the uncertainty measure are provided.

Qt interval prolongation and ventricular arrhythmias in patients with chronic heart failure

International Nuclear Information System (INIS)

Sarwar, M.; Majeed, S.M.I.; Khan, M.A.; Majeed, S.M.

2014-01-01

To determine the association of QTc interval prolongation with ventricular arrhythmias in patients with chronic heart failure. Study Design: Descriptive study. Place and Duration of Study: This study was conducted at Armed Forces Institute of Cardiology/National Institute of Heart Diseases, Rawalpindi, Pakistan from April 2013 to August 2013. Patients and Methods: Fifty three heart failure patients were monitored for 48 hours using ambulatory holter electrocardiography recorders. Digital ECG data was analyzed for QTc interval along with frequency and severity of arrhythmias. Association of prolonged QTc interval with ventricular arrhythmias and severity of arrhythmias was analyzed. Results: Cardiac arrhythmias were observed in 79.2% patients. QT analysis revealed that 69.8% patients had prolonged QTc interval, 86.4% patients with prolonged QTc had ventricular arrhythmias. Of these 66% patients were found to have severe ventricular arrhythmias. Comparison of mean QTc interval of our study population with a reference value showed significantly higher QTc interval of our study group than the test value. Conclusion: Arrhythmia frequency and severity significantly increases with an increase in QTc interval in heart failure demonstrating association of prolonged QTc interval with high risk of severe ventricular arrhythmias and sudden cardiac death in chronic heart failure. (author)

Multichannel interval timer

International Nuclear Information System (INIS)

Turko, B.T.

1983-10-01

A CAMAC based modular multichannel interval timer is described. The timer comprises twelve high resolution time digitizers with a common start enabling twelve independent stop inputs. Ten time ranges from 2.5 μs to 1.3 μs can be preset. Time can be read out in twelve 24-bit words either via CAMAC Crate Controller or an external FIFO register. LSB time calibration is 78.125 ps. An additional word reads out the operational status of twelve stop channels. The system consists of two modules. The analog module contains a reference clock and 13 analog time stretchers. The digital module contains counters, logic and interface circuits. The timer has an excellent differential linearity, thermal stability and crosstalk free performance

Effect of surface texturing on friction properties of WC/Co cemented carbide

International Nuclear Information System (INIS)

Wu, Ze; Deng, Jianxin; Xing, Youqiang; Cheng, Hongwei; Zhao, Jun

2012-01-01

Highlights: ► Tribological properties of surface textured WC/Co cemented carbide were studied. ► Textured surfaces have better performance of antifriction and antiwear. ► Area density of textures has significant effect on tribological performance. -- Abstract: An experimental study was carried out to investigate the tribological properties of different surface textured WC/Co cemented carbide. The influence of applied load, sliding speed and area density of textures on frictional performance of surface textured patterns was investigated by Taguchi method. Results show that the textured surfaces filled with molybdenum disulfide solid lubricants can reduce the average friction coefficient, wear rates of Ti–6Al–4V alloy balls and adhesion of Ti–6Al–4V alloy materials on the worn track of cemented carbide compared with un-textured ones. Variance analysis of the experimental data indicates that the area density of textures plays major contribution of both average friction coefficient and wear rate of Ti–6Al–4V alloy balls. Higher area density of textures is beneficial to improve tribological performance of the cemented carbide samples. Sliding speed seems to have no effect on the tribological performance of textured surfaces within the reliability interval of 90%. Applied load has effect on both average friction coefficient and wear rate of Ti–6Al–4V alloy balls at the reliability interval of 95%.

High aspect ratio nanoholes in glass generated by femtosecond laser pulses with picosecond intervals

Science.gov (United States)

Ahn, Sanghoon; Choi, Jiyeon; Noh, Jiwhan; Cho, Sung-Hak

2018-02-01

Because of its potential uses, high aspect ratio nanostructures have been interested for last few decades. In order to generate nanostructures, various techniques have been attempted. Femtosecond laser ablation is one of techniques for generating nanostructures inside a transparent material. For generating nanostructures by femtosecond laser ablation, previous studies have been attempted beam shaping such as Bessel beam and temporal tailored beam. Both methods suppress electron excitation at near surface and initiate interference of photons at certain depth. Recent researches indicate that shape of nanostructures is related with temporal change of electron density and number of self-trapped excitons. In this study, we try to use the temporal change of electron density induced by femtosecond laser pulse for generating high aspect ratio nanoholes. In order to reveal the effect of temporal change of electron density, secondary pulses are irradiated from 100 to 1000 ps after the irradiation of first pulse. Our result shows that diameter of nanoholes is increasing and depth of nanoholes is decreasing as pulse to pulse interval is getting longer. With manipulating of pulse to pulse interval, we could generate high aspect ratio nanoholes with diameter of 250-350 nm and depth of 4∼6 μm inside a glass.

Dos encuadernaciones históricas: propuesta de intervención

OpenAIRE

Valle Gutiérrez, Ascensión del

2016-01-01

El siguiente trabajo versará sobre la propuesta de intervención de dos encuadernaciones históricas de diferente tipología del fondo de patrimonio documental de la Biblioteca Histórica Marqués de Valdecilla de la Universidad Complutense de Madrid. Se realizará un estudio documental y un análisis detallado del estado de conservación para elaborar una propuesta de intervención ciñéndose a los criterios de metodología e intervención actuales, seguidos a nivel tanto nacional como internacional por...

Binomial confidence intervals for testing non-inferiority or superiority: a practitioner's dilemma.

Science.gov (United States)

Pradhan, Vivek; Evans, John C; Banerjee, Tathagata

2016-08-01

In testing for non-inferiority or superiority in a single arm study, the confidence interval of a single binomial proportion is frequently used. A number of such intervals are proposed in the literature and implemented in standard software packages. Unfortunately, use of different intervals leads to conflicting conclusions. Practitioners thus face a serious dilemma in deciding which one to depend on. Is there a way to resolve this dilemma? We address this question by investigating the performances of ten commonly used intervals of a single binomial proportion, in the light of two criteria, viz., coverage and expected length of the interval. © The Author(s) 2013.

Implementing an interval computation library for OCaml on x86/amd64 architectures

OpenAIRE

Alliot , Jean-Marc; Gotteland , Jean-Baptiste; Vanaret , Charlie; Durand , Nicolas; Gianazza , David

2012-01-01

International audience; In this paper, we present two implementations of interval arithmetic for OCaml on x86/amd64 architectures. The first implementation is a binding to the classical MPFI/MPFR library. It provides access to multi-precision floating-point arithmetic and multi-precision floating-point intervalarithmetic. The second implementation has been natively written in assembly language for low-level functions and in OCaml for higher-levelfunctions. It has proven as fast as classical C...

Ranking DMUs by Comparing DEA Cross-Efficiency Intervals Using Entropy Measures

Directory of Open Access Journals (Sweden)

Tim Lu

2016-12-01

Full Text Available Cross-efficiency evaluation, an extension of data envelopment analysis (DEA, can eliminate unrealistic weighing schemes and provide a ranking for decision making units (DMUs. In the literature, the determination of input and output weights uniquely receives more attentions. However, the problem of choosing the aggressive (minimal or benevolent (maximal formulation for decision-making might still remain. In this paper, we develop a procedure to perform cross-efficiency evaluation without the need to make any specific choice of DEA weights. The proposed procedure takes into account the aggressive and benevolent formulations at the same time, and the choice of DEA weights can then be avoided. Consequently, a number of cross-efficiency intervals is obtained for each DMU. The entropy, which is based on information theory, is an effective tool to measure the uncertainty. We then utilize the entropy to construct a numerical index for DMUs with cross-efficiency intervals. A mathematical program is proposed to find the optimal entropy values of DMUs for comparison. With the derived entropy value, we can rank DMUs accordingly. Two examples are illustrated to show the effectiveness of the idea proposed in this paper.

Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization

International Nuclear Information System (INIS)

Zhang, Enze; Chen, Qingwei

2016-01-01

Most of the existing works addressing reliability redundancy allocation problems are based on the assumption of fixed reliabilities of components. In real-life situations, however, the reliabilities of individual components may be imprecise, most often given as intervals, under different operating or environmental conditions. This paper deals with reliability redundancy allocation problems modeled in an interval environment. An interval multi-objective optimization problem is formulated from the original crisp one, where system reliability and cost are simultaneously considered. To render the multi-objective particle swarm optimization (MOPSO) algorithm capable of dealing with interval multi-objective optimization problems, a dominance relation for interval-valued functions is defined with the help of our newly proposed order relations of interval-valued numbers. Then, the crowding distance is extended to the multi-objective interval-valued case. Finally, the effectiveness of the proposed approach has been demonstrated through two numerical examples and a case study of supervisory control and data acquisition (SCADA) system in water resource management. - Highlights: • We model the reliability redundancy allocation problem in an interval environment. • We apply the particle swarm optimization directly on the interval values. • A dominance relation for interval-valued multi-objective functions is defined. • The crowding distance metric is extended to handle imprecise objective functions.

Reliability Evaluation of Bridges Based on Nonprobabilistic Response Surface Limit Method

OpenAIRE

Chen, Xuyong; Chen, Qian; Bian, Xiaoya; Fan, Jianping

2017-01-01

Due to many uncertainties in nonprobabilistic reliability assessment of bridges, the limit state function is generally unknown. The traditional nonprobabilistic response surface method is a lengthy and oscillating iteration process and leads to difficultly solving the nonprobabilistic reliability index. This article proposes a nonprobabilistic response surface limit method based on the interval model. The intention of this method is to solve the upper and lower limits of the nonprobabilistic ...

Rationalizing method of replacement intervals by using Bayesian statistics

International Nuclear Information System (INIS)

Kasai, Masao; Notoya, Junichi; Kusakari, Yoshiyuki

2007-01-01

This study represents the formulations for rationalizing the replacement intervals of equipments and/or parts taking into account the probability density functions (PDF) of the parameters of failure distribution functions (FDF) and compares the optimized intervals by our formulations with those by conventional formulations which uses only representative values of the parameters of FDF instead of using these PDFs. The failure data are generated by Monte Carlo simulations since the real failure data can not be available for us. The PDF of PDF parameters are obtained by Bayesian method and the representative values are obtained by likelihood estimation and Bayesian method. We found that the method using PDF by Bayesian method brings longer replacement intervals than one using the representative of the parameters. (author)

Coexistence of uniquely ergodic subsystems of interval mapping

International Nuclear Information System (INIS)

Ye Xiangdong.

1991-10-01

The purpose of this paper is to show that uniquely ergodic subsystems of interval mapping also coexist in the same way as minimal sets do. To do this we give some notations in section 2. In section 3 we define D-function of a uniquely ergodic system and show its basic properties. We prove the coexistence of uniquely ergodic subsystems of interval mapping in section 4. Lastly we give the examples of uniquely ergodic systems with given D-functions in section 5. 27 refs

Calving Interval Covariance Structures for dairy breeds in South Africa

African Journals Online (AJOL)

OlivierR

Abstract. Calving interval (CI) is a fertility trait that can be used in selection programmes to minimize the ... Calving Interval (CI), Days Open and Pregnancy Rate. The last group of ..... SAS Institute Inc., Cary, North Carolina, USA. VanRaden ...

Traces of times past : Representations of temporal intervals in memory

NARCIS (Netherlands)

Taatgen, Niels; van Rijn, Hedderik

2011-01-01

Theories of time perception typically assume that some sort of memory represents time intervals. This memory component is typically underdeveloped in theories of time perception. Following earlier work that suggested that representations of different time intervals contaminate each other (Grondin,

Perception of short time scale intervals in a hypnotic virtuoso

NARCIS (Netherlands)

Noreika, Valdas; Falter, Christine M.; Arstila, Valtteri; Wearden, John H.; Kallio, Sakari

2012-01-01

Previous studies showed that hypnotized individuals underestimate temporal intervals in the range of several seconds to tens of minutes. However, no previous work has investigated whether duration perception is equally disorderly when shorter time intervals are probed. In this study, duration

POSTMORTAL CHANGES AND ASSESSMENT OF POSTMORTEM INTERVAL

Directory of Open Access Journals (Sweden)

Edin Šatrović

2013-01-01

Full Text Available This paper describes in a simple way the changes that occur in the body after death.They develop in a specific order, and the speed of their development and their expression are strongly influenced by various endogenous and exogenous factors. The aim of the authors is to indicate the characteristics of the postmortem changes, and their significance in establishing time since death, which can be established precisely within 72 hours. Accurate evaluation of the age of the corpse based on the common changes is not possible with longer postmortem intervals, so the entomological findings become the most significant change on the corpse for determination of the postmortem interval (PMI.

Definition and taxonomy of interval colorectal cancers: a proposal for standardising nomenclature