Sample records for surface hopping algorithm

  1. Hops (United States)

    ... deodorant that contains hops and a specific zinc salt to the underarm can reduce body odor. Insomnia. ... that applying a cream containing bladderwrack, English ivy, horse chestnut, gotu kola, butcher’s broom, horsetail, and hops ( ...

  2. Generalization of fewest-switches surface hopping for coherences (United States)

    Tempelaar, Roel; Reichman, David R.


    Fewest-switches surface hopping (FSSH) is perhaps the most widely used mixed quantum-classical approach for the modeling of non-adiabatic processes, but its original formulation is restricted to (adiabatic) population terms of the quantum density matrix, leaving its implementations with an inconsistency in the treatment of populations and coherences. In this article, we propose a generalization of FSSH that treats both coherence and population terms on equal footing and which formally reduces to the conventional FSSH algorithm for the case of populations. This approach, coherent fewest-switches surface hopping (C-FSSH), employs a decoupling of population relaxation and pure dephasing and involves two replicas of the classical trajectories interacting with two active surfaces. Through extensive benchmark calculations of a spin-boson model involving a Debye spectral density, we demonstrate the potential of C-FSSH to deliver highly accurate results for a large region of parameter space. Its uniform description of populations and coherences is found to resolve incorrect behavior observed for conventional FSSH in various cases, in particular at low temperature, while the parameter space regions where it breaks down are shown to be quite limited. Its computational expenses are virtually identical to conventional FSSH.

  3. A decentralized scheduling algorithm for time synchronized channel hopping

    Directory of Open Access Journals (Sweden)

    Andrew Tinka


    Full Text Available Time Synchronized Channel Hopping (TSCH is an existing Medium Access Control scheme which enables robust communication through channel hopping and high data rates through synchronization. It is based on a time-slotted architecture, and its correct functioning depends on a schedule which is typically computed by a central node. This paper presents, to our knowledge, the first scheduling algorithm for TSCH networks which both is distributed and which copes with mobile nodes. Two variations on scheduling algorithms are presented. Aloha-based scheduling allocates one channel for broadcasting advertisements for new neighbors. Reservation- based scheduling augments Aloha-based scheduling with a dedicated timeslot for targeted advertisements based on gossip information. A mobile ad hoc motorized sensor network with frequent connectivity changes is studied, and the performance of the two proposed algorithms is assessed. This performance analysis uses both simulation results and the results of a field deployment of floating wireless sensors in an estuarial canal environment. Reservation-based scheduling performs significantly better than Aloha-based scheduling, suggesting that the improved network reactivity is worth the increased algorithmic complexity and resource consumption.

  4. Surface hopping, transition state theory and decoherence. I. Scattering theory and time-reversibility. (United States)

    Jain, Amber; Herman, Michael F; Ouyang, Wenjun; Subotnik, Joseph E


    We provide an in-depth investigation of transmission coefficients as computed using the augmented-fewest switches surface hopping algorithm in the low energy regime. Empirically, microscopic reversibility is shown to hold approximately. Furthermore, we show that, in some circumstances, including decoherence on top of surface hopping calculations can help recover (as opposed to destroy) oscillations in the transmission coefficient as a function of energy; these oscillations can be studied analytically with semiclassical scattering theory. Finally, in the spirit of transition state theory, we also show that transmission coefficients can be calculated rather accurately starting from the curve crossing point and running trajectories forwards and backwards.

  5. An efficient solution to the decoherence enhanced trivial crossing problem in surface hopping (United States)

    Bai, Xin; Qiu, Jing; Wang, Linjun


    We provide an in-depth investigation of the time interval convergence when both trivial crossing and decoherence corrections are applied to Tully's fewest switches surface hopping (FSSH) algorithm. Using one force-based and one energy-based decoherence strategies as examples, we show decoherence corrections intrinsically enhance the trivial crossing problem. We propose a restricted decoherence (RD) strategy and incorporate it into the self-consistent (SC) fewest switches surface hopping algorithm [L. Wang and O. V. Prezhdo, J. Phys. Chem. Lett. 5, 713 (2014)]. The resulting SC-FSSH-RD approach is applied to general Hamiltonians with different electronic couplings and electron-phonon couplings to mimic charge transport in tens to hundreds of molecules. In all cases, SC-FSSH-RD allows us to use a large time interval of 0.1 fs for convergence and the simulation time is reduced by over one order of magnitude. Both the band and hopping mechanisms of charge transport have been captured perfectly. SC-FSSH-RD makes surface hops in the adiabatic representation and can be implemented in both diabatic and locally diabatic representations for wave function propagation. SC-FSSH-RD can potentially describe general nonadiabatic dynamics of electrons and excitons in organics and other materials.

  6. Research on Improved DV-HOP Algorithm against Wormhole Attacks in WSN

    Directory of Open Access Journals (Sweden)

    Wang Xue-Wen


    Full Text Available The secure location of node is significant in the WSN (Wireless Sensor Networks of the troop frontier defence system. The wormhole attack is a big threat in the secure location. The credibility of the beacon node was used to determine the malicious nodes produced by wormhole attack in the WSN. The estimated method of multibeacon nodes was adopted to improve DV-HOP algorithm after excluding the malicious nodes. In this paper, we compared the basic DV-HOP algorithm and the improved DV-HOP algorithm in the coverage percentage and the error of network localization by simulating. The simulation results indicate that the improved DV-HOP algorithm makes the localization coverage percentage can reach 90% on a certain scale of the network, and it makes the error percentage lower when the number of beacons is different.

  7. Design and Dynamics Analysis of a Bio-Inspired Intermittent Hopping Robot for Planetary Surface Exploration

    Directory of Open Access Journals (Sweden)

    Long Bai


    Full Text Available A small, bio-inspired and minimally actuated intermittent hopping robot for planetary surface exploration is proposed in this paper. The robot uses a combined-geared six-bar linkage/spring mechanism, which has a possible rich trajectory and metamorphic characteristics and, due to this, the robot is able to recharge, lock/release and jump by using just a micro-power motor as the actuator. Since the robotic system has a closed-chain structure and employs underactuated redundant motion, the constrained multi-body dynamics are derived with time-varying driving parameters and ground unilateral constraint both taken into consideration. In addition, the established dynamics equations, mixed of higher order differential and algebraic expressions, are solved by the immediate integration algorithm. A prototype is implemented and experiments are carried out. The results show that the robot, using a micro-power motor as the actuator and solar cells as the power supply, can achieve a biomimetic multi-body hopping stance and a nonlinearly increasing driving force. Typically, the robot can jump a horizontal distance of about 1 m and a vertical height of about 0.3 m, with its trunk and foot moving stably during takeoff. In addition, the computational and experimental results are consistent as regards the hopping performance of the robot, which suggests that the proposed dynamics model and its solution have general applicability to motion prediction and the performance analysis of intermittent hopping robots.

  8. A Double Rate Localization Algorithm with One Anchor for Multi-Hop Underwater Acoustic Networks (United States)

    Gao, Jingjie; Shen, Xiaohong; Zhao, Ruiqin; Mei, Haodi; Wang, Haiyan


    Localization is a basic issue for underwater acoustic networks (UANs). Currently, most localization algorithms only perform well in one-hop networks or need more anchors which are not suitable for the underwater environment. In this paper, we proposed a double rate localization algorithm with one anchor for multi-hop underwater acoustic networks (DRL). The algorithm firstly presents a double rate scheme which separates the localization procedure into two modes to increase the ranging accuracy in multi-hop UANs while maintaining the transmission rate. Then an optimal selection scheme of reference nodes was proposed to reduce the influence of references’ topology on localization performance. The proposed DRL algorithm can be used in the multi-hop UANs to increase the localization accuracy and reduce the usage of anchor nodes. The simulation and experimental results demonstrated that the proposed DRL algorithm has a better localization performance than the previous algorithms in many aspects such as accuracy and communication cost, and is more suitable to the underwater environment. PMID:28452942

  9. Multi-hop localization algorithm based on grid-scanning for wireless sensor networks. (United States)

    Wan, Jiangwen; Guo, Xiaolei; Yu, Ning; Wu, Yinfeng; Feng, Renjian


    For large-scale wireless sensor networks (WSNs) with a minority of anchor nodes, multi-hop localization is a popular scheme for determining the geographical positions of the normal nodes. However, in practice existing multi-hop localization methods suffer from various kinds of problems, such as poor adaptability to irregular topology, high computational complexity, low positioning accuracy, etc. To address these issues in this paper, we propose a novel Multi-hop Localization algorithm based on Grid-Scanning (MLGS). First, the factors that influence the multi-hop distance estimation are studied and a more realistic multi-hop localization model is constructed. Then, the feasible regions of the normal nodes are determined according to the intersection of bounding square rings. Finally, a verifiably good approximation scheme based on grid-scanning is developed to estimate the coordinates of the normal nodes. Additionally, the positioning accuracy of the normal nodes can be improved through neighbors' collaboration. Extensive simulations are performed in isotropic and anisotropic networks. The comparisons with some typical algorithms of node localization confirm the effectiveness and efficiency of our algorithm.

  10. Communication: Proper treatment of classically forbidden electronic transitions significantly improves detailed balance in surface hopping

    Energy Technology Data Exchange (ETDEWEB)

    Sifain, Andrew E. [Department of Physics and Astronomy, University of Southern California, Los Angeles, California 90089-0485 (United States); Wang, Linjun [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Prezhdo, Oleg V. [Department of Physics and Astronomy, University of Southern California, Los Angeles, California 90089-0485 (United States); Department of Chemistry, University of Southern California, Los Angeles, California 90089-1062 (United States)


    Surface hopping is the most popular method for nonadiabatic molecular dynamics. Many have reported that it does not rigorously attain detailed balance at thermal equilibrium, but does so approximately. We show that convergence to the Boltzmann populations is significantly improved when the nuclear velocity is reversed after a classically forbidden hop. The proposed prescription significantly reduces the total number of classically forbidden hops encountered along a trajectory, suggesting that some randomization in nuclear velocity is needed when classically forbidden hops constitute a large fraction of attempted hops. Our results are verified computationally using two- and three-level quantum subsystems, coupled to a classical bath undergoing Langevin dynamics.

  11. An Effective Hybrid Routing Algorithm in WSN: Ant Colony Optimization in combination with Hop Count Minimization. (United States)

    Jiang, Ailian; Zheng, Lihong


    Low cost, high reliability and easy maintenance are key criteria in the design of routing protocols for wireless sensor networks (WSNs). This paper investigates the existing ant colony optimization (ACO)-based WSN routing algorithms and the minimum hop count WSN routing algorithms by reviewing their strengths and weaknesses. We also consider the critical factors of WSNs, such as energy constraint of sensor nodes, network load balancing and dynamic network topology. Then we propose a hybrid routing algorithm that integrates ACO and a minimum hop count scheme. The proposed algorithm is able to find the optimal routing path with minimal total energy consumption and balanced energy consumption on each node. The algorithm has unique superiority in terms of searching for the optimal path, balancing the network load and the network topology maintenance. The WSN model and the proposed algorithm have been implemented using C++. Extensive simulation experimental results have shown that our algorithm outperforms several other WSN routing algorithms on such aspects that include the rate of convergence, the success rate in searching for global optimal solution, and the network lifetime.

  12. Identifying time measurement tampering in the traversal time and hop count analysis (TTHCA) wormhole detection algorithm. (United States)

    Karlsson, Jonny; Dooley, Laurence S; Pulkkis, Göran


    Traversal time and hop count analysis (TTHCA) is a recent wormhole detection algorithm for mobile ad hoc networks (MANET) which provides enhanced detection performance against all wormhole attack variants and network types. TTHCA involves each node measuring the processing time of routing packets during the route discovery process and then delivering the measurements to the source node. In a participation mode (PM) wormhole where malicious nodes appear in the routing tables as legitimate nodes, the time measurements can potentially be altered so preventing TTHCA from successfully detecting the wormhole. This paper analyses the prevailing conditions for time tampering attacks to succeed for PM wormholes, before introducing an extension to the TTHCA detection algorithm called ∆T Vector which is designed to identify time tampering, while preserving low false positive rates. Simulation results confirm that the ∆T Vector extension is able to effectively detect time tampering attacks, thereby providing an important security enhancement to the TTHCA algorithm.

  13. Identifying Time Measurement Tampering in the Traversal Time and Hop Count Analysis (TTHCA Wormhole Detection Algorithm

    Directory of Open Access Journals (Sweden)

    Jonny Karlsson


    Full Text Available Traversal time and hop count analysis (TTHCA is a recent wormhole detection algorithm for mobile ad hoc networks (MANET which provides enhanced detection performance against all wormhole attack variants and network types. TTHCA involves each node measuring the processing time of routing packets during the route discovery process and then delivering the measurements to the source node. In a participation mode (PM wormhole where malicious nodes appear in the routing tables as legitimate nodes, the time measurements can potentially be altered so preventing TTHCA from successfully detecting the wormhole. This paper analyses the prevailing conditions for time tampering attacks to succeed for PM wormholes, before introducing an extension to the TTHCA detection algorithm called ∆T Vector which is designed to identify time tampering, while preserving low false positive rates. Simulation results confirm that the ∆T Vector extension is able to effectively detect time tampering attacks, thereby providing an important security enhancement to the TTHCA algorithm.

  14. A New MANET wormhole detection algorithm based on traversal time and hop count analysis. (United States)

    Karlsson, Jonny; Dooley, Laurence S; Pulkkis, Göran


    As demand increases for ubiquitous network facilities, infrastructure-less and self-configuring systems like Mobile Ad hoc Networks (MANET) are gaining popularity. MANET routing security however, is one of the most significant challenges to wide scale adoption, with wormhole attacks being an especially severe MANET routing threat. This is because wormholes are able to disrupt a major component of network traffic, while concomitantly being extremely difficult to detect. This paper introduces a new wormhole detection paradigm based upon Traversal Time and Hop Count Analysis (TTHCA), which in comparison to existing algorithms, consistently affords superior detection performance, allied with low false positive rates for all wormhole variants. Simulation results confirm that the TTHCA model exhibits robust wormhole route detection in various network scenarios, while incurring only a small network overhead. This feature makes TTHCA an attractive choice for MANET environments which generally comprise devices, such as wireless sensors, which possess a limited processing capability.

  15. A New MANET Wormhole Detection Algorithm Based on Traversal Time and Hop Count Analysis

    Directory of Open Access Journals (Sweden)

    Göran Pulkkis


    Full Text Available As demand increases for ubiquitous network facilities, infrastructure-less and self-configuring systems like Mobile Ad hoc Networks (MANET are gaining popularity. MANET routing security however, is one of the most significant challenges to wide scale adoption, with wormhole attacks being an especially severe MANET routing threat. This is because wormholes are able to disrupt a major component of network traffic, while concomitantly being extremely difficult to detect. This paper introduces a new wormhole detection paradigm based upon Traversal Time and Hop Count Analysis (TTHCA, which in comparison to existing algorithms, consistently affords superior detection performance, allied with low false positive rates for all wormhole variants. Simulation results confirm that the TTHCA model exhibits robust wormhole route detection in various network scenarios, while incurring only a small network overhead. This feature makes TTHCA an attractive choice for MANET environments which generally comprise devices, such as wireless sensors, which possess a limited processing capability.

  16. Analysis of the trajectory surface hopping method from the Markov state model perspective

    International Nuclear Information System (INIS)

    Akimov, Alexey V.; Wang, Linjun; Prezhdo, Oleg V.; Trivedi, Dhara


    We analyze the applicability of the seminal fewest switches surface hopping (FSSH) method of Tully to modeling quantum transitions between electronic states that are not coupled directly, in the processes such as Auger recombination. We address the known deficiency of the method to describe such transitions by introducing an alternative definition for the surface hopping probabilities, as derived from the Markov state model perspective. We show that the resulting transition probabilities simplify to the quantum state populations derived from the time-dependent Schrödinger equation, reducing to the rapidly switching surface hopping approach of Tully and Preston. The resulting surface hopping scheme is simple and appeals to the fundamentals of quantum mechanics. The computational approach is similar to the FSSH method of Tully, yet it leads to a notably different performance. We demonstrate that the method is particularly accurate when applied to superexchange modeling. We further show improved accuracy of the method, when applied to one of the standard test problems. Finally, we adapt the derived scheme to atomistic simulation, combine it with the time-domain density functional theory, and show that it provides the Auger energy transfer timescales which are in good agreement with experiment, significantly improving upon other considered techniques. (author)

  17. Detailed balance, internal consistency, and energy conservation in fragment orbital-based surface hopping (United States)

    Carof, Antoine; Giannini, Samuele; Blumberger, Jochen


    We have recently introduced an efficient semi-empirical non-adiabatic molecular dynamics method for the simulation of charge transfer/transport in molecules and molecular materials, denoted fragment orbital-based surface hopping (FOB-SH) [J. Spencer et al., J. Chem. Phys. 145, 064102 (2016)]. In this method, the charge carrier wavefunction is expanded in a set of charge localized, diabatic electronic states and propagated in the time-dependent potential due to classical nuclear motion. Here we derive and implement an exact expression for the non-adiabatic coupling vectors between the adiabatic electronic states in terms of nuclear gradients of the diabatic electronic states. With the non-adiabatic coupling vectors (NACVs) available, we investigate how different flavours of fewest switches surface hopping affect detailed balance, internal consistency, and total energy conservation for electron hole transfer in a molecular dimer with two electronic states. We find that FOB-SH satisfies detailed balance across a wide range of diabatic electronic coupling strengths provided that the velocities are adjusted along the direction of the NACV to satisfy total energy conservation upon a surface hop. This criterion produces the right fraction of energy-forbidden (frustrated) hops, which is essential for correct population of excited states, especially when diabatic couplings are on the order of the thermal energy or larger, as in organic semiconductors and DNA. Furthermore, we find that FOB-SH is internally consistent, that is, the electronic surface population matches the average quantum amplitudes, but only in the limit of small diabatic couplings. For large diabatic couplings, inconsistencies are observed as the decrease in excited state population due to frustrated hops is not matched by a corresponding decrease in quantum amplitudes. The derivation provided here for the NACV should be generally applicable to any electronic structure approach where the electronic

  18. On a Hopping-Points SVD and Hough Transform-Based Line Detection Algorithm for Robot Localization and Mapping

    Directory of Open Access Journals (Sweden)

    Abhijeet Ravankar


    Full Text Available Line detection is an important problem in computer vision, graphics and autonomous robot navigation. Lines detected using a laser range sensor (LRS mounted on a robot can be used as features to build a map of the environment, and later to localize the robot in the map, in a process known as Simultaneous Localization and Mapping (SLAM. We propose an efficient algorithm for line detection from LRS data using a novel hopping-points Singular Value Decomposition (SVD and Hough transform-based algorithm, in which SVD is applied to intermittent LRS points to accelerate the algorithm. A reverse-hop mechanism ensures that the end points of the line segments are accurately extracted. Line segments extracted from the proposed algorithm are used to form a map and, subsequently, LRS data points are matched with the line segments to localize the robot. The proposed algorithm eliminates the drawbacks of point-based matching algorithms like the Iterative Closest Points (ICP algorithm, the performance of which degrades with an increasing number of points. We tested the proposed algorithm for mapping and localization in both simulated and real environments, and found it to detect lines accurately and build maps with good self-localization.

  19. Accelerated sampling by infinite swapping of path integral molecular dynamics with surface hopping (United States)

    Lu, Jianfeng; Zhou, Zhennan


    To accelerate the thermal equilibrium sampling of multi-level quantum systems, the infinite swapping limit of a recently proposed multi-level ring polymer representation is investigated. In the infinite swapping limit, the ring polymer evolves according to an averaged Hamiltonian with respect to all possible surface index configurations of the ring polymer and thus connects the surface hopping approach to the mean-field path-integral molecular dynamics. A multiscale integrator for the infinite swapping limit is also proposed to enable efficient sampling based on the limiting dynamics. Numerical results demonstrate the huge improvement of sampling efficiency of the infinite swapping compared with the direct simulation of path-integral molecular dynamics with surface hopping.

  20. On the inclusion of the diagonal Born-Oppenheimer correction in surface hopping methods

    Energy Technology Data Exchange (ETDEWEB)

    Gherib, Rami; Ryabinkin, Ilya G.; Izmaylov, Artur F. [Department of Physical and Environmental Sciences, University of Toronto Scarborough, Toronto, Ontario M1C 1A4 (Canada); Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 (Canada); Ye, Liyuan [Department of Physical and Environmental Sciences, University of Toronto Scarborough, Toronto, Ontario M1C 1A4 (Canada)


    The diagonal Born-Oppenheimer correction (DBOC) stems from the diagonal second derivative coupling term in the adiabatic representation, and it can have an arbitrary large magnitude when a gap between neighbouring Born-Oppenheimer (BO) potential energy surfaces (PESs) is closing. Nevertheless, DBOC is typically neglected in mixed quantum-classical methods of simulating nonadiabatic dynamics (e.g., fewest-switch surface hopping (FSSH) method). A straightforward addition of DBOC to BO PESs in the FSSH method, FSSH+D, has been shown to lead to numerically much inferior results for models containing conical intersections. More sophisticated variation of the DBOC inclusion, phase-space surface-hopping (PSSH) was more successful than FSSH+D but on model problems without conical intersections. This work comprehensively assesses the role of DBOC in nonadiabatic dynamics of two electronic state problems and the performance of FSSH, FSSH+D, and PSSH methods in variety of one- and two-dimensional models. Our results show that the inclusion of DBOC can enhance the accuracy of surface hopping simulations when two conditions are simultaneously satisfied: (1) nuclei have kinetic energy lower than DBOC and (2) PESs are not strongly nonadiabatically coupled. The inclusion of DBOC is detrimental in situations where its energy scale becomes very high or even diverges, because in these regions PESs are also very strongly coupled. In this case, the true quantum formalism heavily relies on an interplay between diagonal and off-diagonal nonadiabatic couplings while surface hopping approaches treat diagonal terms as PESs and off-diagonal ones stochastically.

  1. SHARC: ab Initio Molecular Dynamics with Surface Hopping in the Adiabatic Representation Including Arbitrary Couplings. (United States)

    Richter, Martin; Marquetand, Philipp; González-Vázquez, Jesús; Sola, Ignacio; González, Leticia


    We present a semiclassical surface-hopping method which is able to treat arbitrary couplings in molecular systems including all degrees of freedom. A reformulation of the standard surface-hopping scheme in terms of a unitary transformation matrix allows for the description of interactions like spin-orbit coupling or transitions induced by laser fields. The accuracy of our method is demonstrated in two systems. The first one, consisting of two model electronic states, validates the semiclassical approach in the presence of an electric field. In the second one, the dynamics in the IBr molecule in the presence of spin-orbit coupling after laser excitation is investigated. Due to an avoided crossing that originates from spin-orbit coupling, IBr dissociates into two channels: I + Br((2)P3/2) and I + Br*((2)P1/2). In both systems, the obtained results are in very good agreement with those calculated from exact quantum dynamical simulations.

  2. Path integral molecular dynamics with surface hopping for thermal equilibrium sampling of nonadiabatic systems. (United States)

    Lu, Jianfeng; Zhou, Zhennan


    In this work, a novel ring polymer representation for a multi-level quantum system is proposed for thermal average calculations. The proposed representation keeps the discreteness of the electronic states: besides position and momentum, each bead in the ring polymer is also characterized by a surface index indicating the electronic energy surface. A path integral molecular dynamics with surface hopping (PIMD-SH) dynamics is also developed to sample the equilibrium distribution of the ring polymer configurational space. The PIMD-SH sampling method is validated theoretically and by numerical examples.

  3. A Multi-Hop Energy Neutral Clustering Algorithm for Maximizing Network Information Gathering in Energy Harvesting Wireless Sensor Networks. (United States)

    Yang, Liu; Lu, Yinzhi; Zhong, Yuanchang; Wu, Xuegang; Yang, Simon X


    Energy resource limitation is a severe problem in traditional wireless sensor networks (WSNs) because it restricts the lifetime of network. Recently, the emergence of energy harvesting techniques has brought with them the expectation to overcome this problem. In particular, it is possible for a sensor node with energy harvesting abilities to work perpetually in an Energy Neutral state. In this paper, a Multi-hop Energy Neutral Clustering (MENC) algorithm is proposed to construct the optimal multi-hop clustering architecture in energy harvesting WSNs, with the goal of achieving perpetual network operation. All cluster heads (CHs) in the network act as routers to transmit data to base station (BS) cooperatively by a multi-hop communication method. In addition, by analyzing the energy consumption of intra- and inter-cluster data transmission, we give the energy neutrality constraints. Under these constraints, every sensor node can work in an energy neutral state, which in turn provides perpetual network operation. Furthermore, the minimum network data transmission cycle is mathematically derived using convex optimization techniques while the network information gathering is maximal. Simulation results show that our protocol can achieve perpetual network operation, so that the consistent data delivery is guaranteed. In addition, substantial improvements on the performance of network throughput are also achieved as compared to the famous traditional clustering protocol LEACH and recent energy harvesting aware clustering protocols.

  4. Two-surface Monte Carlo with basin hopping: quantum mechanical trajectory and multiple stationary points of water cluster. (United States)

    Bandyopadhyay, Pradipta


    The efficiency of the two-surface monte carlo (TSMC) method depends on the closeness of the actual potential and the biasing potential used to propagate the system of interest. In this work, it is shown that by combining the basin hopping method with TSMC, the efficiency of the method can be increased by several folds. TSMC with basin hopping is used to generate quantum mechanical trajectory and large number of stationary points of water clusters.

  5. The TROPOMI surface UV algorithm (United States)

    Lindfors, Anders V.; Kujanpää, Jukka; Kalakoski, Niilo; Heikkilä, Anu; Lakkala, Kaisa; Mielonen, Tero; Sneep, Maarten; Krotkov, Nickolay A.; Arola, Antti; Tamminen, Johanna


    The TROPOspheric Monitoring Instrument (TROPOMI) is the only payload of the Sentinel-5 Precursor (S5P), which is a polar-orbiting satellite mission of the European Space Agency (ESA). TROPOMI is a nadir-viewing spectrometer measuring in the ultraviolet, visible, near-infrared, and the shortwave infrared that provides near-global daily coverage. Among other things, TROPOMI measurements will be used for calculating the UV radiation reaching the Earth's surface. Thus, the TROPOMI surface UV product will contribute to the monitoring of UV radiation by providing daily information on the prevailing UV conditions over the globe. The TROPOMI UV algorithm builds on the heritage of the Ozone Monitoring Instrument (OMI) and the Satellite Application Facility for Atmospheric Composition and UV Radiation (AC SAF) algorithms. This paper provides a description of the algorithm that will be used for estimating surface UV radiation from TROPOMI observations. The TROPOMI surface UV product includes the following UV quantities: the UV irradiance at 305, 310, 324, and 380 nm; the erythemally weighted UV; and the vitamin-D weighted UV. Each of these are available as (i) daily dose or daily accumulated irradiance, (ii) overpass dose rate or irradiance, and (iii) local noon dose rate or irradiance. In addition, all quantities are available corresponding to actual cloud conditions and as clear-sky values, which otherwise correspond to the same conditions but assume a cloud-free atmosphere. This yields 36 UV parameters altogether. The TROPOMI UV algorithm has been tested using input based on OMI and the Global Ozone Monitoring Experiment-2 (GOME-2) satellite measurements. These preliminary results indicate that the algorithm is functioning according to expectations.

  6. The TROPOMI surface UV algorithm

    Directory of Open Access Journals (Sweden)

    A. V. Lindfors


    Full Text Available The TROPOspheric Monitoring Instrument (TROPOMI is the only payload of the Sentinel-5 Precursor (S5P, which is a polar-orbiting satellite mission of the European Space Agency (ESA. TROPOMI is a nadir-viewing spectrometer measuring in the ultraviolet, visible, near-infrared, and the shortwave infrared that provides near-global daily coverage. Among other things, TROPOMI measurements will be used for calculating the UV radiation reaching the Earth's surface. Thus, the TROPOMI surface UV product will contribute to the monitoring of UV radiation by providing daily information on the prevailing UV conditions over the globe. The TROPOMI UV algorithm builds on the heritage of the Ozone Monitoring Instrument (OMI and the Satellite Application Facility for Atmospheric Composition and UV Radiation (AC SAF algorithms. This paper provides a description of the algorithm that will be used for estimating surface UV radiation from TROPOMI observations. The TROPOMI surface UV product includes the following UV quantities: the UV irradiance at 305, 310, 324, and 380 nm; the erythemally weighted UV; and the vitamin-D weighted UV. Each of these are available as (i daily dose or daily accumulated irradiance, (ii overpass dose rate or irradiance, and (iii local noon dose rate or irradiance. In addition, all quantities are available corresponding to actual cloud conditions and as clear-sky values, which otherwise correspond to the same conditions but assume a cloud-free atmosphere. This yields 36 UV parameters altogether. The TROPOMI UV algorithm has been tested using input based on OMI and the Global Ozone Monitoring Experiment-2 (GOME-2 satellite measurements. These preliminary results indicate that the algorithm is functioning according to expectations.

  7. A Lifetime Optimization Algorithm Limited by Data Transmission Delay and Hops for Mobile Sink-Based Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Yourong Chen


    Full Text Available To improve the lifetime of mobile sink-based wireless sensor networks and considering that data transmission delay and hops are limited in actual system, a lifetime optimization algorithm limited by data transmission delay and hops (LOA_DH for mobile sink-based wireless sensor networks is proposed. In LOA_DH, some constraints are analyzed, and an optimization model is proposed. Maximum capacity path routing algorithm is used to calculate the energy consumption of communication. Improved genetic algorithm which modifies individuals to meet all constraints is used to solve the optimization model. The optimal solution of sink node’s sojourn grid centers and sojourn times which maximizes network lifetime is obtained. Simulation results show that, in three node distribution scenes, LOA_DH can find the movement solution of sink node which covers all sensor nodes. Compared with MCP_RAND, MCP_GMRE, and EASR, the solution improves network lifetime and reduces average amount of node discarded data and average energy consumption of nodes.

  8. Impact Of Mobility and Transmission Range On The Performance of Backoff Algorithms For IEEE 802.11-Based Multi-hop Mobile Ad hoc Networks


    Saini, Pooja


    In IEEE 802.11 Wireless Local Area Networks (WLANs), network nodes experiencing collisions on the shared channel need to backoff for a random period of time, which is uniformly selected from the Contention Window (CW). This contention window is dynamically controlled by the Backoff algorithm. First step to design a an efficient backoff algorithm for multi-hop ad hoc network is to analysis of the existing backoff algorithms in multi-hop ad hoc networks. Thus, in this paper, we considered two i...

  9. Low-coverage surface diffusion in complex periodic energy landscapes. II. Analytical solution for systems with asymmetric hops (United States)

    Gosálvez, Miguel A.; Otrokov, Mikhail M.; Ferrando, Nestor; Ryabishchenkova, Anastasia G.; Ayuela, Andres; Echenique, Pedro M.; Chulkov, Evgueni V.


    This is part II in a series of two papers that introduce a general expression for the tracer diffusivity in complex, periodic energy landscapes with M distinct hop rates in one-, two-, and three-dimensional diluted systems (low coverage, single-tracer limit). While Part I [Gosálvez et al., Phys. Rev. B 93, 075429 (2016), 10.1103/PhysRevB.93.075429] focuses on the analysis of diffusion in systems where the end sites of the hops are located symmetrically with respect to the hop origins (symmetric hops), as encountered in many ideal surfaces and bulk materials, this report (Part II) presents a more general approach to determining the tracer diffusivity in systems where the end sites can be located asymmetrically with respect to the hop origins (asymmetric hops), as observed in reconstructed and/or chemically modified surfaces and/or bulk materials. The obtained diffusivity formulas for numerous systems are validated against kinetic Monte Carlo simulations and previously reported analytical expressions based on the continuous-time random walk (CTRW) method. The proposed method corrects some of the CTRW formulas and provides new expressions for difficult cases that have not been solved earlier. This demonstrates the ability of the proposed formalism to describe tracer diffusion.

  10. Surface hopping study of the photodissociation dynamics of ICN- and BrCN- (United States)

    Opoku-Agyeman, Bernice; McCoy, Anne B.


    In this work the efficacy of semi-classical surface hopping approaches is investigated through studies of the photodissociation dynamics of BrCN- and ICN-. BrCN- provides a challenging situation for semi-classical approaches as excitation to the first bright state yields both Br- + CN and Br∗ + CN- products. Further, this branching is highly sensitive to the amount of rotational energy in the CN0/- fragment. The results of semi-classical and quantum mechanical descriptions of the dynamics are compared when the classical dynamics are propagated in an adiabatic and diabatic representation. The implications of the differences between the classical and quantum treatments of J = 0 are also explored.

  11. Attractor hopping between polarization dynamical states in a vertical-cavity surface-emitting laser subject to parallel optical injection (United States)

    Denis-le Coarer, Florian; Quirce, Ana; Valle, Angel; Pesquera, Luis; Rodríguez, Miguel A.; Panajotov, Krassimir; Sciamanna, Marc


    We present experimental and theoretical results of noise-induced attractor hopping between dynamical states found in a single transverse mode vertical-cavity surface-emitting laser (VCSEL) subject to parallel optical injection. These transitions involve dynamical states with different polarizations of the light emitted by the VCSEL. We report an experimental map identifying, in the injected power-frequency detuning plane, regions where attractor hopping between two, or even three, different states occur. The transition between these behaviors is characterized by using residence time distributions. We find multistability regions that are characterized by heavy-tailed residence time distributions. These distributions are characterized by a -1.83 ±0.17 power law. Between these regions we find coherence enhancement of noise-induced attractor hopping in which transitions between states occur regularly. Simulation results show that frequency detuning variations and spontaneous emission noise play a role in causing switching between attractors. We also find attractor hopping between chaotic states with different polarization properties. In this case, simulation results show that spontaneous emission noise inherent to the VCSEL is enough to induce this hopping.

  12. Surface hopping dynamics of direct trans --> cis photoswitching of an azobenzene derivative in constrained adsorbate geometries (United States)

    Floß, Gereon; Granucci, Giovanni; Saalfrank, Peter


    With ongoing miniaturization of electronic devices, the need for individually addressable, switchable molecules arises. An example are azobenzenes on surfaces which have been shown to be switchable between trans and cis forms. Here, we examine the "direct" (rather than substrate-mediated) channel of the trans → cis photoisomerization after ππ* excitation of tetra-tert-butyl-azobenzene physisorbed on surfaces mimicking Au(111) and Bi(111), respectively. In spirit of the direct channel, the electronic structure of the surface is neglected, the latter merely acting as a rigid platform which weakly interacts with the molecule via Van-der-Waals forces. Starting from thermal ensembles which represent the trans-form, sudden excitations promote the molecules to ππ*-excited states which are non-adiabatically coupled among themselves and to a nπ*-excited and the ground state, respectively. After excitation, relaxation to the ground state by internal conversion takes place, possibly accompanied by isomerization. The process is described here by "on the fly" semiclassical surface hopping dynamics in conjunction with a semiempirical Hamiltonian (AM1) and configuration-interaction type methods. It is found that steric constraints imposed by the substrate lead to reduced but non-vanishing, trans → cis reaction yields and longer internal conversion times than for the isolated molecule. Implications for recent experiments for azobenzenes on surfaces are discussed.

  13. Thermal equilibrium properties of surface hopping with an implicit Langevin bath. (United States)

    Sherman, M C; Corcelli, S A


    The ability of fewest switches surface hopping (FSSH) approach, where the classical degrees of freedom are coupled to an implicit Langevin bath, to establish and maintain an appropriate thermal equilibrium was evaluated in the context of a three site model for electron transfer. The electron transfer model consisted of three coupled diabatic states that each depends harmonically on the collective bath coordinate. This results in three states with increasing energy in the adiabatic representation. The adiabatic populations and distributions of the collective solvent coordinate were monitored during the course of 250 ns FSSH-Langevin (FSSH-L) simulations performed at a broad range of temperatures and for three different nonadiabatic coupling strengths. The agreement between the FSSH-L simulations and numerically exact results for the adiabatic population ratios and solvent coordinate distributions was generally favorable. The FSSH-L method produces a correct Boltzmann distribution of the solvent coordinate on each of the adiabats, but the integrated populations are slightly incorrect because FSSH does not rigorously obey detailed balance. The overall agreement is better at high temperatures and for high nonadiabatic coupling, which agrees with a previously reported analytical and simulation analysis [J. R. Schmidt, P. V. Parandekar, and J. C. Tully, J. Chem. Phys. 129, 044104 (2008)] on a two-level system coupled to a classical bath.

  14. Replica Node Detection Using Enhanced Single Hop Detection with Clonal Selection Algorithm in Mobile Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    L. S. Sindhuja


    Full Text Available Security of Mobile Wireless Sensor Networks is a vital challenge as the sensor nodes are deployed in unattended environment and they are prone to various attacks. One among them is the node replication attack. In this, the physically insecure nodes are acquired by the adversary to clone them by having the same identity of the captured node, and the adversary deploys an unpredictable number of replicas throughout the network. Hence replica node detection is an important challenge in Mobile Wireless Sensor Networks. Various replica node detection techniques have been proposed to detect these replica nodes. These methods incur control overheads and the detection accuracy is low when the replica is selected as a witness node. This paper proposes to solve these issues by enhancing the Single Hop Detection (SHD method using the Clonal Selection algorithm to detect the clones by selecting the appropriate witness nodes. The advantages of the proposed method include (i increase in the detection ratio, (ii decrease in the control overhead, and (iii increase in throughput. The performance of the proposed work is measured using detection ratio, false detection ratio, packet delivery ratio, average delay, control overheads, and throughput. The implementation is done using ns-2 to exhibit the actuality of the proposed work.

  15. A Distributed Multi-hop Low Cost Time Synchronization Algorithm in Wireless Sensor Network developed for Bridge Diagnosis System (United States)

    Xiao, Haitao; Ogai, Harutoshi; Ding, Zhehan

    Due to the oceanic climate and frequent earthquakes in Japan, bridge health diagnosis is a problem of greater complexity. In bridge diagnosis system, we develop a wireless sensor network to sample and gather the vibration data of bridge. Time synchronization is a crucial component for the wireless sensor network (WSN), because large populations of sensor nodes will collaborate in order to complete the measuring data at the same time, data gathering, data fusion and localization. In the wireless sensor network with large scale of energy limited nodes, multi-hop time synchronization is necessarily applied. To solve above mentioned problem, some protocols such as RBS, TSPN FTPS etc. are proposed. However most of the algorithms mainly focus on the precision of synchronization. In fact energy efficiency is also a challenge in a resource-limited WSN. In this paper an improved time synchronization scheme is proposed with the purpose of reducing energy consumption and lengthening whole WSN'life. Performance analyses, simulations and realization in node hardware of WSN are also presented.

  16. Stimulated Raman signals at conical intersections: Ab initio surface hopping simulation protocol with direct propagation of the nuclear wave function

    Energy Technology Data Exchange (ETDEWEB)

    Kowalewski, Markus, E-mail:; Mukamel, Shaul, E-mail: [Department of Chemistry, University of California, Irvine, California 92697-2025 (United States)


    Femtosecond Stimulated Raman Spectroscopy (FSRS) signals that monitor the excited state conical intersections dynamics of acrolein are simulated. An effective time dependent Hamiltonian for two C—H vibrational marker bands is constructed on the fly using a local mode expansion combined with a semi-classical surface hopping simulation protocol. The signals are obtained by a direct forward and backward propagation of the vibrational wave function on a numerical grid. Earlier work is extended to fully incorporate the anharmonicities and intermode couplings.

  17. Stimulated Raman signals at conical intersections: Ab initio surface hopping simulation protocol with direct propagation of the nuclear wave function

    International Nuclear Information System (INIS)

    Kowalewski, Markus; Mukamel, Shaul


    Femtosecond Stimulated Raman Spectroscopy (FSRS) signals that monitor the excited state conical intersections dynamics of acrolein are simulated. An effective time dependent Hamiltonian for two C—H vibrational marker bands is constructed on the fly using a local mode expansion combined with a semi-classical surface hopping simulation protocol. The signals are obtained by a direct forward and backward propagation of the vibrational wave function on a numerical grid. Earlier work is extended to fully incorporate the anharmonicities and intermode couplings

  18. Protein structure prediction using basin-hopping (United States)

    Prentiss, Michael C.; Wales, David J.; Wolynes, Peter G.


    Associative memory Hamiltonian structure prediction potentials are not overly rugged, thereby suggesting their landscapes are like those of actual proteins. In the present contribution we show how basin-hopping global optimization can identify low-lying minima for the corresponding mildly frustrated energy landscapes. For small systems the basin-hopping algorithm succeeds in locating both lower minima and conformations closer to the experimental structure than does molecular dynamics with simulated annealing. For large systems the efficiency of basin-hopping decreases for our initial implementation, where the steps consist of random perturbations to the Cartesian coordinates. We implemented umbrella sampling using basin-hopping to further confirm when the global minima are reached. We have also improved the energy surface by employing bioinformatic techniques for reducing the roughness or variance of the energy surface. Finally, the basin-hopping calculations have guided improvements in the excluded volume of the Hamiltonian, producing better structures. These results suggest a novel and transferable optimization scheme for future energy function development.

  19. Simulation of the photodynamics of azobenzene on its first excited state: Comparison of full multiple spawning and surface hopping treatments

    International Nuclear Information System (INIS)

    Toniolo, A.; Ciminelli, C.; Persico, M.; Martinez, T.J.


    We have studied the cis→trans and trans→cis photoisomerization of azobenzene after n→π* excitation using the full multiple spawning (FMS) method for nonadiabatic wave-packet dynamics with potential-energy surfaces and couplings determined 'on the fly' from a reparametrized multiconfigurational semiempirical method. We compare the FMS results with a previous direct dynamics treatment using the same potential-energy surfaces and couplings, but with the nonadiabatic dynamics modeled using a semiclassical surface hopping (SH) method. We concentrate on the dynamical effects that determine the photoisomerization quantum yields, namely, the rate of radiationless electronic relaxation and the character of motion along the reaction coordinate. The quantal and semiclassical results are in good general agreement, confirming our previous analysis of the photodynamics. The SH method slightly overestimates the rate of excited state decay, leading in this case to lower quantum yields

  20. An On-the-Fly Surface-Hopping Program JADE for Nonadiabatic Molecular Dynamics of Polyatomic Systems: Implementation and Applications. (United States)

    Du, Likai; Lan, Zhenggang


    Nonadiabatic dynamics simulations have rapidly become an indispensable tool for understanding ultrafast photochemical processes in complex systems. Here, we present our recently developed on-the-fly nonadiabatic dynamics package, JADE, which allows researchers to perform nonadiabatic excited-state dynamics simulations of polyatomic systems at an all-atomic level. The nonadiabatic dynamics is based on Tully's surface-hopping approach. Currently, several electronic structure methods (CIS, TDHF, TDDFT(RPA/TDA), and ADC(2)) are supported, especially TDDFT, aiming at performing nonadiabatic dynamics on medium- to large-sized molecules. The JADE package has been interfaced with several quantum chemistry codes, including Turbomole, Gaussian, and Gamess (US). To consider environmental effects, the Langevin dynamics was introduced as an easy-to-use scheme into the standard surface-hopping dynamics. The JADE package is mainly written in Fortran for greater numerical performance and Python for flexible interface construction, with the intent of providing open-source, easy-to-use, well-modularized, and intuitive software in the field of simulations of photochemical and photophysical processes. To illustrate the possible applications of the JADE package, we present a few applications of excited-state dynamics for various polyatomic systems, such as the methaniminium cation, fullerene (C20), p-dimethylaminobenzonitrile (DMABN) and its primary amino derivative aminobenzonitrile (ABN), and 10-hydroxybenzo[h]quinoline (10-HBQ).

  1. Transmembrane and ubiquitin-like domain-containing protein 1 (Tmub1/HOPS facilitates surface expression of GluR2-containing AMPA receptors.

    Directory of Open Access Journals (Sweden)

    Hyunjeong Yang

    Full Text Available Some ubiquitin-like (UBL domain-containing proteins are known to play roles in receptor trafficking. Alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid receptors (AMPARs undergo constitutive cycling between the intracellular compartment and the cell surface in the central nervous system. However, the function of UBL domain-containing proteins in the recycling of the AMPARs to the synaptic surface has not yet been reported.Here, we report that the Transmembrane and ubiquitin-like domain-containing 1 (Tmub1 protein, formerly known as the Hepatocyte Odd Protein Shuttling (HOPS protein, which is abundantly expressed in the brain and which exists in a synaptosomal membrane fraction, facilitates the recycling of the AMPAR subunit GluR2 to the cell surface. Neurons transfected with Tmub1/HOPS-RNAi plasmids showed a significant reduction in the AMPAR current as compared to their control neurons. Consistently, the synaptic surface expression of GluR2, but not of GluR1, was significantly decreased in the neurons transfected with the Tmub1/HOPS-RNAi and increased in the neurons overexpressing EGFP-Tmub1/HOPS. The altered surface expression of GluR2 was speculated to be due to the altered surface-recycling of the internalized GluR2 in our recycling assay. Eventually, we found that GluR2 and glutamate receptor interacting protein (GRIP were coimmunoprecipitated by the anti-Tmub1/HOPS antibody from the mouse brain. Taken together, these observations show that the Tmub1/HOPS plays a role in regulating basal synaptic transmission; it contributes to maintain the synaptic surface number of the GluR2-containing AMPARs by facilitating the recycling of GluR2 to the plasma membrane.

  2. Surface hopping dynamics using a locally diabatic formalism: Charge transfer in the ethylene dimer cation and excited state dynamics in the 2- pyridone dimer

    Czech Academy of Sciences Publication Activity Database

    Plasser, F.; Granucci, G.; Pittner, Jiří; Barbatti, M.; Persico, M.; Lischka, H.


    Roč. 137, č. 22 (2012), 22A514 ISSN 0021-9606 R&D Projects: GA ČR(CZ) GAP208/12/0559 Institutional support: RVO:61388955 Keywords : surface hopping dynamics * molecular dynamics * electron transfer Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.164, year: 2012

  3. Precision Hopping/Rolling Robotic Surface Probe Based on Tensegrity Structures (United States)

    National Aeronautics and Space Administration — We propose to overcome the limitations of wheeled surface rovers by combining recent advances in ball-shaped soft-robots based on tensegrity structures (a tension...

  4. DEHAR: a Distributed Energy Harvesting Aware Routing Algorithm for Ad-hoc Multi-hop Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Koefoed; Madsen, Jan; Hansen, Michael Reichhardt


    One of the key design goals in Wireless Sensor Networks is long lasting or even continuous operation. Continuous operation is made possible through energy harvesting. Keeping the network operational imposes a demand to prevent network segmentation and power loss in nodes. It is therefore important...... that the best energy-wise route is found for each data transfer from a source node to the sink node. We present a new adaptive and distributed routing algorithm for finding energy optimised routes in a wireless sensor network with energy harvesting. The algorithm finds an energy efficient route from each source...... node to a single sink node, taking into account the current energy status of the network. By simulation, the algorithm is shown to be able to adapt to changes in harvested and stored energy. Simulations show that continuous operation is possible....

  5. Model-driven harmonic parameterization of the cortical surface: HIP-HOP. (United States)

    Auzias, G; Lefèvre, J; Le Troter, A; Fischer, C; Perrot, M; Régis, J; Coulon, O


    In the context of inter subject brain surface matching, we present a parameterization of the cortical surface constrained by a model of cortical organization. The parameterization is defined via an harmonic mapping of each hemisphere surface to a rectangular planar domain that integrates a representation of the model. As opposed to previous landmark-based registration methods we do not match folds between individuals but instead optimize the fit between cortical sulci and specific iso-coordinate axis in the model. This strategy overcomes some limitation to sulcus-based registration techniques such as topological variability in sulcal landmarks across subjects. Experiments on 62 subjects with manually traced sulci are presented and compared with the result of the Freesurfer software. The evaluation involves a measure of dispersion of sulci with both angular and area distortions. We show that the model-based strategy can lead to a natural, efficient and very fast (less than 5 min per hemisphere) method for defining inter subjects correspondences. We discuss how this approach also reduces the problems inherent to anatomically defined landmarks and open the way to the investigation of cortical organization through the notion of orientation and alignment of structures across the cortex.

  6. Aluminum Nitride Hydrolysis Enabled by Hydroxyl-Mediated Surface Proton Hopping. (United States)

    Bartel, Christopher J; Muhich, Christopher L; Weimer, Alan W; Musgrave, Charles B


    Aluminum nitride (AlN) is used extensively in the semiconductor industry as a high-thermal-conductivity insulator, but its manufacture is encumbered by a tendency to degrade in the presence of water. The propensity for AlN to hydrolyze has led to its consideration as a redox material for solar thermochemical ammonia (NH3) synthesis applications where AlN would be intentionally hydrolyzed to produce NH3 and aluminum oxide (Al2O3), which could be subsequently reduced in nitrogen (N2) to reform AlN and reinitiate the NH3 synthesis cycle. No quantitative, atomistic mechanism by which AlN, and more generally, metal nitrides react with water to become oxidized and generate NH3 yet exists. In this work, we used density-functional theory (DFT) to examine the reaction mechanisms of the initial stages of AlN hydrolysis, which include: water adsorption, hydroxyl-mediated proton diffusion to form NH3, and NH3 desorption. We found activation barriers (Ea) for hydrolysis of 330 and 359 kJ/mol for the cases of minimal adsorbed water and additional adsorbed water, respectively, corroborating the high observed temperatures for the onset of steam AlN hydrolysis. We predict AlN hydrolysis to be kinetically limited by the dissociation of strong Al-N bonds required to accumulate protons on surface N atoms to form NH3. The hydrolysis mechanism we elucidate is enabled by the diffusion of protons across the AlN surface by a hydroxyl-mediated Grotthuss mechanism. A comparison between intrinsic (Ea = 331 kJ/mol) and mediated proton diffusion (Ea = 89 kJ/mol) shows that hydroxyl-mediated proton diffusion is the predominant mechanism in AlN hydrolysis. The large activation barrier for NH3 generation from AlN (Ea = 330 or 359 kJ/mol, depending on water coverage) suggests that in the design of materials for solar thermochemical ammonia synthesis, emphasis should be placed on metal nitrides with less covalent metal-nitrogen bonds and, thus, more-facile NH3 liberation.

  7. Hop crop wild relatives (United States)

    The versatile hop plant, Humulus L., is a climbing, vine with a perennial root. The genus includes three species, H. japonicus, H. lupulus, and H. yunnanensis. The European hops (H. lupulus) is the species of primary economic importance from which most hop cultivars have been selected. This species ...

  8. Surface-Heating Algorithm for Water at Nanoscale. (United States)

    Y D, Sumith; Maroo, Shalabh C


    A novel surface-heating algorithm for water is developed for molecular dynamics simulations. The validated algorithm can simulate the transient behavior of the evaporation of water when heated from a surface, which has been lacking in the literature. In this work, the algorithm is used to study the evaporation of water droplets on a platinum surface at different temperatures. The resulting contact angles of the droplets are compared to existing theoretical, numerical, and experimental studies. The evaporation profile along the droplet's radius and height is deduced along with the temperature gradient within the drop, and the evaporation behavior conforms to the Kelvin-Clapeyron theory. The algorithm captures the realistic differential thermal gradient in water heated at the surface and is promising for studying various heating/cooling problems, such as thin film evaporation, Leidenfrost effect, and so forth. The simplicity of the algorithm allows it to be easily extended to other surfaces and integrated into various molecular simulation software and user codes.

  9. Firefly Algorithm for Polynomial Bézier Surface Parameterization

    Directory of Open Access Journals (Sweden)

    Akemi Gálvez


    reality, medical imaging, computer graphics, computer animation, and many others. Very often, the preferred approximating surface is polynomial, usually described in parametric form. This leads to the problem of determining suitable parametric values for the data points, the so-called surface parameterization. In real-world settings, data points are generally irregularly sampled and subjected to measurement noise, leading to a very difficult nonlinear continuous optimization problem, unsolvable with standard optimization techniques. This paper solves the parameterization problem for polynomial Bézier surfaces by applying the firefly algorithm, a powerful nature-inspired metaheuristic algorithm introduced recently to address difficult optimization problems. The method has been successfully applied to some illustrative examples of open and closed surfaces, including shapes with singularities. Our results show that the method performs very well, being able to yield the best approximating surface with a high degree of accuracy.

  10. A Hopping Height Control for Hopping Robot (United States)

    Ohashi, Eijiro; Ohnishi, Kouhei

    In recent years, legged robots are progressed and able to walk just like human beings. Hopping has a possibility of moving faster and avoiding larger obstacles than walking. Thus hopping becomes more significant. In this paper, to take account of torque limits of motors, we propose the method of controlling the hopping height by changing the leg length at bottom. Considering an actual environment, the environment will change as the robot moves around. Therefore we describe the way to estimate an actual thrust force. Using the estimated thrust force, command value of leg length in the landing phase is determined. The effectiveness of proposed method is confirmed by simulative and experimental results.

  11. A genetic algorithm approach in interface and surface structure optimization

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jian [Iowa State Univ., Ames, IA (United States)


    The thesis is divided into two parts. In the first part a global optimization method is developed for the interface and surface structures optimization. Two prototype systems are chosen to be studied. One is Si[001] symmetric tilted grain boundaries and the other is Ag/Au induced Si(111) surface. It is found that Genetic Algorithm is very efficient in finding lowest energy structures in both cases. Not only existing structures in the experiments can be reproduced, but also many new structures can be predicted using Genetic Algorithm. Thus it is shown that Genetic Algorithm is a extremely powerful tool for the material structures predictions. The second part of the thesis is devoted to the explanation of an experimental observation of thermal radiation from three-dimensional tungsten photonic crystal structures. The experimental results seems astounding and confusing, yet the theoretical models in the paper revealed the physics insight behind the phenomena and can well reproduced the experimental results.

  12. A Novel Algorithm of Surface Eliminating in Undersurface Optoacoustic Imaging

    Directory of Open Access Journals (Sweden)

    Zhulina Yulia V


    Full Text Available This paper analyzes the task of optoacoustic imaging of the objects located under the surface covering them. In this paper, we suggest the algorithm of the surface eliminating based on the fact that the intensity of the image as a function of the spatial point should change slowly inside the local objects, and will suffer a discontinuity of the spatial gradients on their boundaries. The algorithm forms the 2-dimensional curves along which the discontinuity of the signal derivatives is detected. Then, the algorithm divides the signal space into the areas along these curves. The signals inside the areas with the maximum level of the signal amplitudes and the maximal gradient absolute values on their edges are put equal to zero. The rest of the signals are used for the image restoration. This method permits to reconstruct the picture of the surface boundaries with a higher contrast than that of the surface detection technique based on the maximums of the received signals. This algorithm does not require any prior knowledge of the signals' statistics inside and outside the local objects. It may be used for reconstructing any images with the help of the signals representing the integral over the object's volume. Simulation and real data are also provided to validate the proposed method.

  13. Wheeled hopping robot (United States)

    Fischer, Gary J [Albuquerque, NM


    The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

  14. Global structual optimizations of surface systems with a genetic algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Chuang, Feng-Chuan [Iowa State Univ., Ames, IA (United States)


    Global structural optimizations with a genetic algorithm were performed for atomic cluster and surface systems including aluminum atomic clusters, Si magic clusters on the Si(111) 7 x 7 surface, silicon high-index surfaces, and Ag-induced Si(111) reconstructions. First, the global structural optimizations of neutral aluminum clusters Aln algorithm in combination with tight-binding and first-principles calculations were performed to study the structures of magic clusters on the Si(111) 7 x 7 surface. Extensive calculations show that the magic cluster observed in scanning tunneling microscopy (STM) experiments consist of eight Si atoms. Simulated STM images of the Si magic cluster exhibit a ring-like feature similar to STM experiments. Third, a genetic algorithm coupled with a highly optimized empirical potential were used to determine the lowest energy structure of high-index semiconductor surfaces. The lowest energy structures of Si(105) and Si(114) were determined successfully. The results of Si(105) and Si(114) are reported within the framework of highly optimized empirical potential and first-principles calculations. Finally, a genetic algorithm coupled with Si and Ag tight-binding potentials were used to search for Ag-induced Si(111) reconstructions at various Ag and Si coverages. The optimized structural models of √3 x √3, 3 x 1, and 5 x 2 phases were reported using first-principles calculations. A novel model is found to have lower surface energy than the proposed double-honeycomb chained (DHC) model both for Au/Si(111) 5 x 2 and Ag/Si(111) 5 x 2 systems.

  15. Hopping Robot with Wheels (United States)

    Barlow, Edward; Marzwell, Nevellie; Fuller, Sawyer; Fionni, Paolo; Tretton, Andy; Burdick, Joel; Schell, Steve


    A small prototype mobile robot is capable of (1) hopping to move rapidly or avoid obstacles and then (2) moving relatively slowly and precisely on the ground by use of wheels in the manner of previously reported exploratory robots of the "rover" type. This robot is a descendant of a more primitive hopping robot described in "Minimally Actuated Hopping Robot" (NPO- 20911), NASA Tech Briefs, Vol. 26, No. 11 (November 2002), page 50. There are many potential applications for robots with hopping and wheeled-locomotion (roving) capabilities in diverse fields of endeavor, including agriculture, search-and-rescue operations, general military operations, removal or safe detonation of land mines, inspection, law enforcement, and scientific exploration on Earth and remote planets. The combination of hopping and roving enables this robot to move rapidly over very rugged terrain, to overcome obstacles several times its height, and then to position itself precisely next to a desired target. Before a long hop, the robot aims itself in the desired hopping azimuth and at a desired takeoff angle above horizontal. The robot approaches the target through a series of hops and short driving operations utilizing the steering wheels for precise positioning.

  16. Steerable Hopping Six-Legged Robot (United States)

    Younse, Paulo; Aghazarian, Hrand


    The figure depicts selected aspects of a six-legged robot that moves by hopping and that can be steered in the sense that it can be launched into a hop in a controllable direction. This is a prototype of hopping robots being developed for use in scientific exploration of rough terrain on remote planets that have surface gravitation less than that of Earth. Hopping robots could also be used on Earth, albeit at diminished hopping distances associated with the greater Earth gravitation. The upper end of each leg is connected through two universal joints to an upper and a lower hexagonal frame, such that the tilt of the leg depends on the relative position of the two frames. Two non-back-driveable worm-gear motor drives are used to control the relative position of the two frames along two axes 120 apart, thereby controlling the common tilt of all six legs and thereby, further, controlling the direction of hopping. Each leg includes an upper and a lower aluminum frame segment with a joint between them. A fiberglass spring, connected via hinges to both segments, is used to store hopping energy prior to launch into a hop and to cushion the landing at the end of the hop. A cable for loading the spring is run into each leg through the center of the universal joints and then down along the center lines of the segments to the lower end of the leg. A central spool actuated by a motor with a harmonic drive and an electromagnetic clutch winds in all six cables to compress all six springs (thereby also flexing all six legs) simultaneously. To ensure that all the legs push off and land in the same direction, timing- belt pulley drives are attached to the leg segments, restricting the flexing and extension of all six legs to a common linear motion. In preparation for a hop, the spool can be driven to load the spring legs by an amount corresponding to a desired hop distance within range. The amount of compression can be computed from the reading of a shaft-angle encoder that

  17. Surface solar irradiance from SCIAMACHY measurements: algorithm and validation

    Directory of Open Access Journals (Sweden)

    P. Wang


    Full Text Available Broadband surface solar irradiances (SSI are, for the first time, derived from SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CartograpHY satellite measurements. The retrieval algorithm, called FRESCO (Fast REtrieval Scheme for Clouds from the Oxygen A band SSI, is similar to the Heliosat method. In contrast to the standard Heliosat method, the cloud index is replaced by the effective cloud fraction derived from the FRESCO cloud algorithm. The MAGIC (Mesoscale Atmospheric Global Irradiance Code algorithm is used to calculate clear-sky SSI. The SCIAMACHY SSI product is validated against globally distributed BSRN (Baseline Surface Radiation Network measurements and compared with ISCCP-FD (International Satellite Cloud Climatology Project Flux Dataset surface shortwave downwelling fluxes (SDF. For one year of data in 2008, the mean difference between the instantaneous SCIAMACHY SSI and the hourly mean BSRN global irradiances is −4 W m−2 (−1 % with a standard deviation of 101 W m−2 (20 %. The mean difference between the globally monthly mean SCIAMACHY SSI and ISCCP-FD SDF is less than −12 W m−2 (−2 % for every month in 2006 and the standard deviation is 62 W m−2 (12 %. The correlation coefficient is 0.93 between SCIAMACHY SSI and BSRN global irradiances and is greater than 0.96 between SCIAMACHY SSI and ISCCP-FD SDF. The evaluation results suggest that the SCIAMACHY SSI product achieves similar mean bias error and root mean square error as the surface solar irradiances derived from polar orbiting satellites with higher spatial resolution.

  18. Fully automated algorithm for wound surface area assessment. (United States)

    Deana, Alessandro Melo; de Jesus, Sérgio Henrique Costa; Sampaio, Brunna Pileggi Azevedo; Oliveira, Marcelo Tavares; Silva, Daniela Fátima Teixeira; França, Cristiane Miranda


    Worldwide, clinicians, dentists, nurses, researchers, and other health professionals need to monitor the wound healing progress and to quantify the rate of wound closure. The aim of this study is to demonstrate, step by step, a fully automated numerical method to estimate the size of the wound and the percentage damaged relative to the body surface area (BSA) in images, without the requirement for human intervention. We included the formula for BSA in rats in the algorithm. The methodology was validated in experimental wounds and human ulcers and was compared with the analysis of an experienced pathologist, with good agreement. Therefore, this algorithm is suitable for experimental wounds and burns and human ulcers, as they have a high contrast with adjacent normal skin. © 2013 by the Wound Healing Society.

  19. Hopping transport in solids

    CERN Document Server

    Pollak, M


    The hopping process, which differs substantially from conventional transport processes in crystals, is the central process in the transport phenomena discussed in this book. Throughout the book the term ``hopping'' is defined as the inelastic tunneling transfer of an electron between two localized electronic states centered at different locations. Such processes do not occur in conventional electronic transport in solids, since localized states are not compatible with the translational symmetry of crystals.The rapid growth of interest in hopping transport has followed in the footsteps of the

  20. Analysis of the Geometrical Evolution in On-the-Fly Surface-Hopping Nonadiabatic Dynamics with Machine Learning Dimensionality Reduction Approaches: Classical Multidimensional Scaling and Isometric Feature Mapping. (United States)

    Li, Xusong; Xie, Yu; Hu, Deping; Lan, Zhenggang


    On-the-fly trajectory-based nonadiabatic dynamics simulation has become an important approach to study ultrafast photochemical and photophysical processes in recent years. Because a large number of trajectories are generated from the dynamics simulation of polyatomic molecular systems with many degrees of freedom, the analysis of simulation results often suffers from the large amount of high-dimensional data. It is very challenging but meaningful to find dominating active coordinates from very complicated molecular motions. Dimensionality reduction techniques provide ideal tools to realize this purpose. We apply two dimensionality reduction approaches (classical multidimensional scaling and isometric feature mapping) to analyze the results of the on-the-fly surface-hopping nonadiabatic dynamics simulation. Two representative model systems, CH 2 NH 2 + and the phytochromobilin chromophore model, are chosen to examine the performance of these dimensionality reduction approaches. The results show that these approaches are very promising, because they can extract the major molecular motion from complicated time-dependent molecular evolution without preknown knowledge.

  1. Fast surface-based travel depth estimation algorithm for macromolecule surface shape description. (United States)

    Giard, Joachim; Alface, Patrice Rondao; Gala, Jean-Luc; Macq, Benoît


    Travel Depth, introduced by Coleman and Sharp in 2006, is a physical interpretation of molecular depth, a term frequently used to describe the shape of a molecular active site or binding site. Travel Depth can be seen as the physical distance a solvent molecule would have to travel from a point of the surface, i.e., the Solvent-Excluded Surface (SES), to its convex hull. Existing algorithms providing an estimation of the Travel Depth are based on a regular sampling of the molecule volume and the use of the Dijkstra's shortest path algorithm. Since Travel Depth is only defined on the molecular surface, this volume-based approach is characterized by a large computational complexity due to the processing of unnecessary samples lying inside or outside the molecule. In this paper, we propose a surface-based approach that restricts the processing to data defined on the SES. This algorithm significantly reduces the complexity of Travel Depth estimation and makes possible the analysis of large macromolecule surface shape description with high resolution. Experimental results show that compared to existing methods, the proposed algorithm achieves accurate estimations with considerably reduced processing times.

  2. Monitoring Antarctic ice sheet surface melting with TIMESAT algorithm (United States)

    Ye, Y.; Cheng, X.; Li, X.; Liang, L.


    Antarctic ice sheet contributes significantly to the global heat budget by controlling the exchange of heat, moisture, and momentum at the surface-atmosphere interface, which directly influence the global atmospheric circulation and climate change. Ice sheet melting will cause snow humidity increase, which will accelerate the disintegration and movement of ice sheet. As a result, detecting Antarctic ice sheet melting is essential for global climate change research. In the past decades, various methods have been proposed for extracting snowmelt information from multi-channel satellite passive microwave data. Some methods are based on brightness temperature values or a composite index of them, and others are based on edge detection. TIMESAT (Time-series of Satellite sensor data) is an algorithm for extracting seasonality information from time-series of satellite sensor data. With TIMESAT long-time series brightness temperature (SSM/I 19H) is simulated by Double Logistic function. Snow is classified to wet and dry snow with generalized Gaussian model. The results were compared with those from a wavelet algorithm. On this basis, Antarctic automatic weather station data were used for ground verification. It shows that this algorithm is effective in ice sheet melting detection. The spatial distribution of melting areas(Fig.1) shows that, the majority of melting areas are located on the edge of Antarctic ice shelf region. It is affected by land cover type, surface elevation and geographic location (latitude). In addition, the Antarctic ice sheet melting varies with seasons. It is particularly acute in summer, peaking at December and January, staying low in March. In summary, from 1988 to 2008, Ross Ice Shelf and Ronnie Ice Shelf have the greatest interannual variability in amount of melting, which largely determines the overall interannual variability in Antarctica. Other regions, especially Larsen Ice Shelf and Wilkins Ice Shelf, which is in the Antarctic Peninsula

  3. Multi-state nonadiabatic deactivation mechanism of coumarin revealed by ab initio on-the-fly trajectory surface hopping dynamic simulation. (United States)

    Gan, Yanzhen; Yue, Ling; Guo, Xugeng; Zhu, Chaoyuan; Cao, Zexing


    An on-the-fly trajectory surface hopping dynamic simulation has been performed for revealing the multi-state nonadiabatic deactivation mechanism of coumarin. The mechanism involves three adiabatic excited states, S 3 (ππ*L b ), S 2 (nπ*, ππ*L a ) and S 1 (ππ*L a , nπ*), and the ground state S 0 at the four state-averaged complete active space self-consistent field, SA4-CASSCF(12,10)/6-31G* level of theory. Upon photoexcitation to the third excited state S 3 (ππ*L b ) in the Franck-Condon region, 80% sampling trajectories decay to the dark S 2 (nπ*) state within an average of 5 fs via the conical intersection S 3 (ππ*L b )/S 2 (nπ*), while 20% decay to the S 2 (ππ*L a ) state within an average of 11 fs via the conical intersection S 3 (ππ*L b )/S 2 (ππ*L a ). Then, sampling trajectories via S 2 (nπ*)/S 1 (ππ*L a ) continue with ultrafast decay processes to give a final distribution of quantum yields as follows: 42% stay on the dark S 1 (nπ*) state, 43.3% go back to the ground S 0 state, 12% undergo a ring-opening reaction to the Z-form S 0 (Z) state, and 2.7% go to the E-form S 0 (E) state. The lifetimes of the excited states are estimated as follows: the S 3 state is about 12 fs on average, the S 2 state is about 80 fs, and the S 1 state has a fast component of about 160 fs and a slow component of 15 ps. The simulated ultrafast radiationless deactivation pathways of photoexcited coumarin immediately interpret the experimentally observed weak fluorescence emission.

  4. Efficient algorithms for maximum likelihood decoding in the surface code (United States)

    Bravyi, Sergey; Suchara, Martin; Vargo, Alexander


    We describe two implementations of the optimal error correction algorithm known as the maximum likelihood decoder (MLD) for the two-dimensional surface code with a noiseless syndrome extraction. First, we show how to implement MLD exactly in time O (n2), where n is the number of code qubits. Our implementation uses a reduction from MLD to simulation of matchgate quantum circuits. This reduction however requires a special noise model with independent bit-flip and phase-flip errors. Secondly, we show how to implement MLD approximately for more general noise models using matrix product states (MPS). Our implementation has running time O (nχ3), where χ is a parameter that controls the approximation precision. The key step of our algorithm, borrowed from the density matrix renormalization-group method, is a subroutine for contracting a tensor network on the two-dimensional grid. The subroutine uses MPS with a bond dimension χ to approximate the sequence of tensors arising in the course of contraction. We benchmark the MPS-based decoder against the standard minimum weight matching decoder observing a significant reduction of the logical error probability for χ ≥4.

  5. Improved Grid-Scan Localization Algorithm for Wireless Sensor Networks


    Nallanthighal, Raghava Srinivasa; Chinta, Veeranjaneyulu


    Localization is a fundamental and crucial service for various applications in wireless sensor networks (WSNs). In this paper an improved grid-scan localization algorithm has been proposed. In the proposed algorithm, information about 1-hop, 2-hop, and farther neighboring anchors has been collected that estimates the region using 1-hop anchors. Then, this estimated region is divided into a grid array, finding valid grids using 1-hop and 2-hop anchors information. In addition to that the farthe...

  6. Electron hopping through proteins

    Czech Academy of Sciences Publication Activity Database

    Warren, J. J.; Ener, M. E.; Vlček, Antonín; Winkler, J. R.; Gray, H. B.


    Roč. 256, 21-22 (2012), s. 2478-2487 ISSN 0010-8545 R&D Projects: GA MŠk(CZ) ME10124 Institutional support: RVO:61388955 Keywords : electron transfer * multistep tunneling * hopping maps Subject RIV: CG - Electrochemistry Impact factor: 11.016, year: 2012

  7. Climate, weather, and hops (United States)

    As climate and weather become more variable, hop growers face increased uncertainty in making decisions about their crop. Given the unprecedented nature of these changes, growers may no longer have enough information and intuitive understanding to adequately assess the situation and evaluate their m...

  8. Estimation and Coordination of Sequence Patterns for Frequency Hopping Dynamic Spectrum Access Networks (United States)


    23 3.1.1 System Development . . . . . . . . . . . . . . . . . . . . . . . . . 23 Gold’s Algorithm VHDL Design...141 Appendix: VHDL code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 References...Frequency Hopping SMREM Suggested Master REM SPSFH sub-packet slow frequency hopping TTR Time-to-Rendezvous VHDL Very High Speed Integrated Circuit Hardware

  9. Surface roughness optimization in machining of AZ31 magnesium alloy using ABC algorithm

    Directory of Open Access Journals (Sweden)



    Full Text Available Magnesium alloys serve as excellent substitutes for materials traditionally used for engine block heads in automobiles and gear housings in aircraft industries. AZ31 is a magnesium alloy finds its applications in orthopedic implants and cardiovascular stents. Surface roughness is an important parameter in the present manufacturing sector. In this work optimization techniques namely firefly algorithm (FA, particle swarm optimization (PSO and artificial bee colony algorithm (ABC which are based on swarm intelligence techniques, have been implemented to optimize the machining parameters namely cutting speed, feed rate and depth of cut in order to achieve minimum surface roughness. The parameter Ra has been considered for evaluating the surface roughness. Comparing the performance of ABC algorithm with FA and PSO algorithm, which is a widely used optimization algorithm in machining studies, the results conclude that ABC produces better optimization when compared to FA and PSO for optimizing surface roughness of AZ 31.

  10. Hop limited epidemic-like information spreading in mobile social networks with selfish nodes

    International Nuclear Information System (INIS)

    Wu, Yahui; Deng, Su; Huang, Hongbin


    Similar to epidemics, information can be transmitted directly among users in mobile social networks. Different from epidemics, we can control the spreading process by adjusting the corresponding parameters (e.g., hop count) directly. This paper proposes a theoretical model to evaluate the performance of an epidemic-like spreading algorithm, in which the maximal hop count of the information is limited. In addition, our model can be used to evaluate the impact of users’ selfish behavior. Simulations show the accuracy of our theoretical model. Numerical results show that the information hop count can have an important impact. In addition, the impact of selfish behavior is related to the information hop count. (paper)

  11. Hip-Hop Education Resources (United States)

    Hall, Marcella Runell


    Hip-hop music and culture are often cited as being public pedagogy, meaning the music itself has intrinsic educational value. Non-profit organizations and individual educators have graciously taken the lead in utilizing hip-hop to educate. As the academy continues to debate its effectiveness, teachers and community organizers are moving forward.…

  12. Algorithms

    Indian Academy of Sciences (India)

    have been found in Vedic Mathematics which are dated much before Euclid's algorithm. A programming language Is used to describe an algorithm for execution on a computer. An algorithm expressed using a programming language Is called a program. From activities 1-3, we can observe that: • Each activity is a command.

  13. Mapping Surface Broadband Albedo from Satellite Observations: A Review of Literatures on Algorithms and Products

    Directory of Open Access Journals (Sweden)

    Ying Qu


    Full Text Available Surface albedo is one of the key controlling geophysical parameters in the surface energy budget studies, and its temporal and spatial variation is closely related to the global climate change and regional weather system due to the albedo feedback mechanism. As an efficient tool for monitoring the surfaces of the Earth, remote sensing is widely used for deriving long-term surface broadband albedo with various geostationary and polar-orbit satellite platforms in recent decades. Moreover, the algorithms for estimating surface broadband albedo from satellite observations, including narrow-to-broadband conversions, bidirectional reflectance distribution function (BRDF angular modeling, direct-estimation algorithm and the algorithms for estimating albedo from geostationary satellite data, are developed and improved. In this paper, we present a comprehensive literature review on algorithms and products for mapping surface broadband albedo with satellite observations and provide a discussion of different algorithms and products in a historical perspective based on citation analysis of the published literature. This paper shows that the observation technologies and accuracy requirement of applications are important, and long-term, global fully-covered (including land, ocean, and sea-ice surfaces, gap-free, surface broadband albedo products with higher spatial and temporal resolution are required for climate change, surface energy budget, and hydrological studies.

  14. Supercritical fluid extraction of hops

    Directory of Open Access Journals (Sweden)



    Full Text Available Five cultivars of hop were extracted by the method of supercritical fluid extraction using carbon dioxide (SFE–CO2 as extractant. The extraction (50 g of hop sample using a CO2 flow rate of 97.725 L/h was done in the two steps: 1. extraction at 150 bar and 40°C for 2.5 h (sample of series A was obtained and, after that, the same sample of hop was extracted in the second step: 2. extraction at 300 bar and 40 °C for 2.5 h (sample of series B was obtained. The Magnum cultivar was chosen for the investigation of the extraction kinetics. For the qualitative and quantitative analysis of the obtained hop extracts, the GC-MS method was used. Two of four themost common compounds of hop aroma (a-humulene and b-caryophyllene were detected in samples of series A. In addition, isomerized a-acids and a high content of b-acids were detected. The a-acids content in the samples of series B was the highest in the extract of the Magnum cultivar (it is a bitter variety of hop. The low contents of a-acids in all the other hop samples resulted in extracts with low a-acids content, i.e., that contents were under the prescribed a-acids content.

  15. From Massively Parallel Algorithms and Fluctuating Time Horizons to Nonequilibrium Surface Growth

    International Nuclear Information System (INIS)

    Korniss, G.; Toroczkai, Z.; Novotny, M. A.; Rikvold, P. A.


    We study the asymptotic scaling properties of a massively parallel algorithm for discrete-event simulations where the discrete events are Poisson arrivals. The evolution of the simulated time horizon is analogous to a nonequilibrium surface. Monte Carlo simulations and a coarse-grained approximation indicate that the macroscopic landscape in the steady state is governed by the Edwards-Wilkinson Hamiltonian. Since the efficiency of the algorithm corresponds to the density of local minima in the associated surface, our results imply that the algorithm is asymptotically scalable. (c) 2000 The American Physical Society

  16. Application of image recognition algorithms for statistical description of nano- and microstructured surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Mărăscu, V.; Dinescu, G. [National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Street, Bucharest– Magurele (Romania); Faculty of Physics, University of Bucharest, 405 Atomistilor Street, Bucharest-Magurele (Romania); Chiţescu, I. [Faculty of Mathematics and Computer Science, University of Bucharest, 14 Academiei Street, Bucharest (Romania); Barna, V. [Faculty of Physics, University of Bucharest, 405 Atomistilor Street, Bucharest-Magurele (Romania); Ioniţă, M. D.; Lazea-Stoyanova, A.; Mitu, B., E-mail: [National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Street, Bucharest– Magurele (Romania)


    In this paper we propose a statistical approach for describing the self-assembling of sub-micronic polystyrene beads on silicon surfaces, as well as the evolution of surface topography due to plasma treatments. Algorithms for image recognition are used in conjunction with Scanning Electron Microscopy (SEM) imaging of surfaces. In a first step, greyscale images of the surface covered by the polystyrene beads are obtained. Further, an adaptive thresholding method was applied for obtaining binary images. The next step consisted in automatic identification of polystyrene beads dimensions, by using Hough transform algorithm, according to beads radius. In order to analyze the uniformity of the self–assembled polystyrene beads, the squared modulus of 2-dimensional Fast Fourier Transform (2- D FFT) was applied. By combining these algorithms we obtain a powerful and fast statistical tool for analysis of micro and nanomaterials with aspect features regularly distributed on surface upon SEM examination.

  17. Braking distance algorithm for autonomous cars using road surface recognition (United States)

    Kavitha, C.; Ashok, B.; Nanthagopal, K.; Desai, Rohan; Rastogi, Nisha; Shetty, Siddhanth


    India is yet to accept semi/fully - autonomous cars and one of the reasons, was loss of control on bad roads. For a better handling on these roads we require advanced braking and that can be done by adapting electronics into the conventional type of braking. In Recent years, the automation in braking system led us to various benefits like traction control system, anti-lock braking system etc. This research work describes and experiments the method for recognizing road surface profile and calculating braking distance. An ultra-sonic surface recognition sensor, mounted underneath the car will send a high frequency wave on to the road surface, which is received by a receiver with in the sensor, it calculates the time taken for the wave to rebound and thus calculates the distance from the point where sensor is mounted. A displacement graph will be plotted based on the output of the sensor. A relationship can be derived between the displacement plot and roughness index through which the friction coefficient can be derived in Matlab for continuous calculation throughout the distance travelled. Since it is a non-contact type of profiling, it is non-destructive. The friction coefficient values received in real-time is used to calculate optimum braking distance. This system, when installed on normal cars can also be used to create a database of road surfaces, especially in cities, which can be shared with other cars. This will help in navigation as well as making the cars more efficient.

  18. High-Speed On-Board Data Processing for Science Instruments: HOPS (United States)

    Beyon, Jeffrey


    The project called High-Speed On-Board Data Processing for Science Instruments (HOPS) has been funded by NASA Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST) program during April, 2012 â€" April, 2015. HOPS is an enabler for science missions with extremely high data processing rates. In this three-year effort of HOPS, Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) and 3-D Winds were of interest in particular. As for ASCENDS, HOPS replaces time domain data processing with frequency domain processing while making the real-time on-board data processing possible. As for 3-D Winds, HOPS offers real-time high-resolution wind profiling with 4,096-point fast Fourier transform (FFT). HOPS is adaptable with quick turn-around time. Since HOPS offers reusable user-friendly computational elements, its FPGA IP Core can be modified for a shorter development period if the algorithm changes. The FPGA and memory bandwidth of HOPS is 20 GB/sec while the typical maximum processor-to-SDRAM bandwidth of the commercial radiation tolerant high-end processors is about 130-150 MB/sec. The inter-board communication bandwidth of HOPS is 4 GB/sec while the effective processor-to-cPCI bandwidth of commercial radiation tolerant high-end boards is about 50-75 MB/sec. Also, HOPS offers VHDL cores for the easy and efficient implementation of ASCENDS and 3-D Winds, and other similar algorithms. A general overview of the 3-year development of HOPS is the goal of this presentation.

  19. Algorithms

    Indian Academy of Sciences (India)

    algorithms such as synthetic (polynomial) division have been found in Vedic Mathematics which are dated much before Euclid's algorithm. A programming language ... ·1 x:=sln(theta) x : = sm(theta) 1. ~. Idl d.t Read A.B,C. ~ lei ~ Print x.y.z. L;;;J. Figure 2 Symbols used In flowchart language to rep- resent Assignment, Read.

  20. Algorithms

    Indian Academy of Sciences (India)

    In the previous articles, we have discussed various common data-structures such as arrays, lists, queues and trees and illustrated the widely used algorithm design paradigm referred to as 'divide-and-conquer'. Although there has been a large effort in realizing efficient algorithms, there are not many universally accepted ...

  1. Hall effect in hopping regime

    Energy Technology Data Exchange (ETDEWEB)

    Avdonin, A., E-mail: [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Skupiński, P. [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Grasza, K. [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Institute of Electronic Materials Technology, ul. Wólczyńska 133, 01-919 Warszawa (Poland)


    A simple description of the Hall effect in the hopping regime of conductivity in semiconductors is presented. Expressions for the Hall coefficient and Hall mobility are derived by considering averaged equilibrium electron transport in a single triangle of localization sites in a magnetic field. Dependence of the Hall coefficient is analyzed in a wide range of temperature and magnetic field values. Our theoretical result is applied to our experimental data on temperature dependence of Hall effect and Hall mobility in ZnO. - Highlights: • Expressions for Hall coefficient and mobility for hopping conductivity are derived. • Theoretical result is compared with experimental curves measured on ZnO. • Simultaneous action of free and hopping conduction channels is considered. • Non-linearity of hopping Hall coefficient is predicted.

  2. [An operational remote sensing algorithm of land surface evapotranspiration based on NOAA PAL dataset]. (United States)

    Hou, Ying-Yu; He, Yan-Bo; Wang, Jian-Lin; Tian, Guo-Liang


    Based on the time series 10-day composite NOAA Pathfinder AVHRR Land (PAL) dataset (8 km x 8 km), and by using land surface energy balance equation and "VI-Ts" (vegetation index-land surface temperature) method, a new algorithm of land surface evapotranspiration (ET) was constructed. This new algorithm did not need the support from meteorological observation data, and all of its parameters and variables were directly inversed or derived from remote sensing data. A widely accepted ET model of remote sensing, i. e., SEBS model, was chosen to validate the new algorithm. The validation test showed that both the ET and its seasonal variation trend estimated by SEBS model and our new algorithm accorded well, suggesting that the ET estimated from the new algorithm was reliable, being able to reflect the actual land surface ET. The new ET algorithm of remote sensing was practical and operational, which offered a new approach to study the spatiotemporal variation of ET in continental scale and global scale based on the long-term time series satellite remote sensing images.

  3. Modified SIMPLE algorithm for the numerical analysis of incompressible flows with free surface

    International Nuclear Information System (INIS)

    Mok, Jin Ho; Hong, Chun Pyo; Lee, Jin Ho


    While the SIMPLE algorithm is most widely used for the simulations of flow phenomena that take place in the industrial equipment or the manufacturing processes, it is less adopted for the simulations of the free surface flow. Though the SIMPLE algorithm is free from the limitation of time step, the free surface behavior imposes the restriction on the time step. As a result, the explicit schemes are faster than the implicit scheme in terms of computation time when the same time step is applied to, since the implicit scheme includes the numerical method to solve the simultaneous equations in its procedure. If the computation time of SIMPLE algorithm can be reduced when it is applied to the unsteady free surface flow problems, the calculation can be carried out in the more stable way and, in the design process, the process variables can be controlled based on the more accurate data base. In this study, a modified SIMPLE algorithm is presented for the free surface flow. The broken water column problem is adopted for the validation of the modified algorithm (MoSIMPLE) and for comparison to the conventional SIMPLE algorithm

  4. Research on the target coverage algorithms for 3D curved surface

    International Nuclear Information System (INIS)

    Sun, Shunyuan; Sun, Li; Chen, Shu


    To solve the target covering problems in three-dimensional space, putting forward a deployment strategies of the target points innovatively, and referencing to the differential evolution (DE) algorithm to optimize the location coordinates of the sensor nodes to realize coverage of all the target points in 3-D surface with minimal sensor nodes. Firstly, building the three-dimensional perception model of sensor nodes, and putting forward to the blind area existing in the process of the sensor nodes sensing the target points in 3-D surface innovatively, then proving the feasibility of solving the target coverage problems in 3-D surface with DE algorithm theoretically, and reflecting the fault tolerance of the algorithm.

  5. Development of MODIS data-based algorithm for retrieving sea surface temperature in coastal waters. (United States)

    Wang, Jiao; Deng, Zhiqiang


    A new algorithm was developed for retrieving sea surface temperature (SST) in coastal waters using satellite remote sensing data from Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Aqua platform. The new SST algorithm was trained using the Artificial Neural Network (ANN) method and tested using 8 years of remote sensing data from MODIS Aqua sensor and in situ sensing data from the US coastal waters in Louisiana, Texas, Florida, California, and New Jersey. The ANN algorithm could be utilized to map SST in both deep offshore and particularly shallow nearshore waters at the high spatial resolution of 1 km, greatly expanding the coverage of remote sensing-based SST data from offshore waters to nearshore waters. Applications of the ANN algorithm require only the remotely sensed reflectance values from the two MODIS Aqua thermal bands 31 and 32 as input data. Application results indicated that the ANN algorithm was able to explaining 82-90% variations in observed SST in US coastal waters. While the algorithm is generally applicable to the retrieval of SST, it works best for nearshore waters where important coastal resources are located and existing algorithms are either not applicable or do not work well, making the new ANN-based SST algorithm unique and particularly useful to coastal resource management.

  6. Algorithms for singularities and real structures of weak Del Pezzo surfaces

    KAUST Repository

    Lubbes, Niels


    In this paper, we consider the classification of singularities [P. Du Val, On isolated singularities of surfaces which do not affect the conditions of adjunction. I, II, III, Proc. Camb. Philos. Soc. 30 (1934) 453-491] and real structures [C. T. C. Wall, Real forms of smooth del Pezzo surfaces, J. Reine Angew. Math. 1987(375/376) (1987) 47-66, ISSN 0075-4102] of weak Del Pezzo surfaces from an algorithmic point of view. It is well-known that the singularities of weak Del Pezzo surfaces correspond to root subsystems. We present an algorithm which computes the classification of these root subsystems. We represent equivalence classes of root subsystems by unique labels. These labels allow us to construct examples of weak Del Pezzo surfaces with the corresponding singularity configuration. Equivalence classes of real structures of weak Del Pezzo surfaces are also represented by root subsystems. We present an algorithm which computes the classification of real structures. This leads to an alternative proof of the known classification for Del Pezzo surfaces and extends this classification to singular weak Del Pezzo surfaces. As an application we classify families of real conics on cyclides. © World Scientific Publishing Company.

  7. Three-Dimensional Tracking of Interfacial Hopping Diffusion (United States)

    Wang, Dapeng; Wu, Haichao; Schwartz, Daniel K.


    Theoretical predictions have suggested that molecular motion at interfaces—which influences processes including heterogeneous catalysis, (bio)chemical sensing, lubrication and adhesion, and nanomaterial self-assembly—may be dominated by hypothetical "hops" through the adjacent liquid phase, where a diffusing molecule readsorbs after a given hop according to a probabilistic "sticking coefficient." Here, we use three-dimensional (3D) single-molecule tracking to explicitly visualize this process for human serum albumin at solid-liquid interfaces that exert varying electrostatic interactions on the biomacromolecule. Following desorption from the interface, a molecule experiences multiple unproductive surface encounters before readsorption. An average of approximately seven surface collisions is required for the repulsive surfaces, decreasing to approximately two and a half for surfaces that are more attractive. The hops themselves are also influenced by long-range interactions, with increased electrostatic repulsion causing hops of longer duration and distance. These findings explicitly demonstrate that interfacial diffusion is dominated by biased 3D Brownian motion involving bulk-surface coupling and that it can be controlled by influencing short- and long-range adsorbate-surface interactions.

  8. Application of genetic algorithm in the evaluation of the profile error of archimedes helicoid surface (United States)

    Zhu, Lianqing; Chen, Yunfang; Chen, Qingshan; Meng, Hao


    According to minimum zone condition, a method for evaluating the profile error of Archimedes helicoid surface based on Genetic Algorithm (GA) is proposed. The mathematic model of the surface is provided and the unknown parameters in the equation of surface are acquired through least square method. Principle of GA is explained. Then, the profile error of Archimedes Helicoid surface is obtained through GA optimization method. To validate the proposed method, the profile error of an Archimedes helicoid surface, Archimedes Cylindrical worm (ZA worm) surface, is evaluated. The results show that the proposed method is capable of correctly evaluating the profile error of Archimedes helicoid surface and satisfy the evaluation standard of the Minimum Zone Method. It can be applied to deal with the measured data of profile error of complex surface obtained by three coordinate measurement machines (CMM).

  9. Algorithms

    Indian Academy of Sciences (India)

    In the program shown in Figure 1, we have repeated the algorithm. M times and we can make the following observations. Each block is essentially a different instance of "code"; that is, the objects differ by the value to which N is initialized before the execution of the. "code" block. Thus, we can now avoid the repetition of the ...

  10. Algorithms

    Indian Academy of Sciences (India)

    algorithms built into the computer corresponding to the logic- circuit rules that are used to .... For the purpose of carrying ou t ari thmetic or logical operations the memory is organized in terms .... In fixed point representation, one essentially uses integer arithmetic operators assuming the binary point to be at some point other ...

  11. Surface deformation recovery algorithm for reflector antennas based on geometric optics. (United States)

    Huang, Jianhui; Jin, Huiliang; Ye, Qian; Meng, Guoxiang


    Surface deformations of large reflector antennas highly depend on elevation angle. This paper adopted a scheme with the ability to conduct measurement at any elevation angle: carrying an emission source, an unmanned aerial vehicle (UAV) scans the antenna on a near-field plane, meanwhile the antenna stays stationary. Near-field amplitude is measured in the scheme. To recover the deformation from the measured amplitude, this paper proposed a novel algorithm by deriving the deformation-amplitude equation, which reveals the relation between the surface deformation and the near-field amplitude. By the algorithm, a precise deformation recovery can be reached at a low frequency (<1GHz) through single near-field amplitude. Simulation results showed the high accuracy and adaptability of the algorithm.

  12. Algorithm for Automated Mapping of Land Surface Temperature Using LANDSAT 8 Satellite Data


    Ugur Avdan; Gordana Jovanovska


    Land surface temperature is an important factor in many areas, such as global climate change, hydrological, geo-/biophysical, and urban land use/land cover. As the latest launched satellite from the LANDSAT family, LANDSAT 8 has opened new possibilities for understanding the events on the Earth with remote sensing. This study presents an algorithm for the automatic mapping of land surface temperature from LANDSAT 8 data. The tool was developed using the LANDSAT 8 thermal infrared sensor Band ...

  13. A comparison of two open source LiDAR surface classification algorithms (United States)

    With the progression of LiDAR (Light Detection and Ranging) towards a mainstream resource management tool, it has become necessary to understand how best to process and analyze the data. While most ground surface identification algorithms remain proprietary and have high purchase costs; a few are op...

  14. A comparison of two open source LiDAR surface classification algorithms (United States)

    Wade T. Tinkham; Hongyu Huang; Alistair M.S. Smith; Rupesh Shrestha; Michael J. Falkowski; Andrew T. Hudak; Timothy E. Link; Nancy F. Glenn; Danny G. Marks


    With the progression of LiDAR (Light Detection and Ranging) towards a mainstream resource management tool, it has become necessary to understand how best to process and analyze the data. While most ground surface identification algorithms remain proprietary and have high purchase costs; a few are openly available, free to use, and are supported by published results....

  15. Algorithm for Automated Mapping of Land Surface Temperature Using LANDSAT 8 Satellite Data

    Directory of Open Access Journals (Sweden)

    Ugur Avdan


    Full Text Available Land surface temperature is an important factor in many areas, such as global climate change, hydrological, geo-/biophysical, and urban land use/land cover. As the latest launched satellite from the LANDSAT family, LANDSAT 8 has opened new possibilities for understanding the events on the Earth with remote sensing. This study presents an algorithm for the automatic mapping of land surface temperature from LANDSAT 8 data. The tool was developed using the LANDSAT 8 thermal infrared sensor Band 10 data. Different methods and formulas were used in the algorithm that successfully retrieves the land surface temperature to help us study the thermal environment of the ground surface. To verify the algorithm, the land surface temperature and the near-air temperature were compared. The results showed that, for the first case, the standard deviation was 2.4°C, and for the second case, it was 2.7°C. For future studies, the tool should be refined with in situ measurements of land surface temperature.

  16. Hopping models and ac universality

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas


    Some general relations for hopping models are established. We proceed to discuss the universality of the ac conductivity which arises in the extreme disorder limit of the random barrier model. It is shown that the relevant dimension entering into the diffusion cluster approximation (DCA) is the h......Some general relations for hopping models are established. We proceed to discuss the universality of the ac conductivity which arises in the extreme disorder limit of the random barrier model. It is shown that the relevant dimension entering into the diffusion cluster approximation (DCA...

  17. A stable high-order perturbation of surfaces method for numerical simulation of diffraction problems in triply layered media

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Youngjoon, E-mail:; Nicholls, David P., E-mail:


    The accurate numerical simulation of linear waves interacting with periodic layered media is a crucial capability in engineering applications. In this contribution we study the stable and high-order accurate numerical simulation of the interaction of linear, time-harmonic waves with a periodic, triply layered medium with irregular interfaces. In contrast with volumetric approaches, High-Order Perturbation of Surfaces (HOPS) algorithms are inexpensive interfacial methods which rapidly and recursively estimate scattering returns by perturbation of the interface shape. In comparison with Boundary Integral/Element Methods, the stable HOPS algorithm we describe here does not require specialized quadrature rules, periodization strategies, or the solution of dense non-symmetric positive definite linear systems. In addition, the algorithm is provably stable as opposed to other classical HOPS approaches. With numerical experiments we show the remarkable efficiency, fidelity, and accuracy one can achieve with an implementation of this algorithm.

  18. Hip-Hop and the Academic Canon (United States)

    Abe, Daudi


    Over the last 30 years, the hip-hop movement has risen from the margins to become the preeminent force in US popular culture. In more recent times academics have begun to harness the power of hip-hop culture and use it as a means of infusing transformative knowledge into the mainstream academic discourse. On many college campuses, hip-hop's…

  19. Hierarchical Threshold Adaptive for Point Cloud Filter Algorithm of Moving Surface Fitting

    Directory of Open Access Journals (Sweden)

    ZHU Xiaoxiao


    Full Text Available In order to improve the accuracy,efficiency and adaptability of point cloud filtering algorithm,a hierarchical threshold adaptive for point cloud filter algorithm of moving surface fitting was proposed.Firstly,the noisy points are removed by using a statistic histogram method.Secondly,the grid index is established by grid segmentation,and the surface equation is set up through the lowest point among the neighborhood grids.The real height and fit are calculated.The difference between the elevation and the threshold can be determined.Finally,in order to improve the filtering accuracy,hierarchical filtering is used to change the grid size and automatically set the neighborhood size and threshold until the filtering result reaches the accuracy requirement.The test data provided by the International Photogrammetry and Remote Sensing Society (ISPRS is used to verify the algorithm.The first and second error and the total error are 7.33%,10.64% and 6.34% respectively.The algorithm is compared with the eight classical filtering algorithms published by ISPRS.The experiment results show that the method has well-adapted and it has high accurate filtering result.

  20. Implementation of Low Power Multi-hop Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Zhou Jianhong


    Full Text Available In this paper, the multi-hop wireless sensor network is created, which is realized by Micaz and Mib520 Board using TinyOS and Cygwin. The mote transmission mode is engaged and off-the-shelf protocols and algorithm, RSSI and PDR, are applied in this wireless network and the performance is improved. Several experiments are proposed to set standard RSSI threshold value to allow the user to send packet with efficient power level.

  1. Inversion of Land Surface Temperature (LST Using Terra ASTER Data: A Comparison of Three Algorithms

    Directory of Open Access Journals (Sweden)

    Milton Isaya Ndossi


    Full Text Available Land Surface Temperature (LST is an important measurement in studies related to the Earth surface’s processes. The Advanced Space-borne Thermal Emission and Reflection Radiometer (ASTER instrument onboard the Terra spacecraft is the currently available Thermal Infrared (TIR imaging sensor with the highest spatial resolution. This study involves the comparison of LSTs inverted from the sensor using the Split Window Algorithm (SWA, the Single Channel Algorithm (SCA and the Planck function. This study has used the National Oceanic and Atmospheric Administration’s (NOAA data to model and compare the results from the three algorithms. The data from the sensor have been processed by the Python programming language in a free and open source software package (QGIS to enable users to make use of the algorithms. The study revealed that the three algorithms are suitable for LST inversion, whereby the Planck function showed the highest level of accuracy, the SWA had moderate level of accuracy and the SCA had the least accuracy. The algorithms produced results with Root Mean Square Errors (RMSE of 2.29 K, 3.77 K and 2.88 K for the Planck function, the SCA and SWA respectively.

  2. A Screen Space GPGPU Surface LIC Algorithm for Distributed Memory Data Parallel Sort Last Rendering Infrastructures

    Energy Technology Data Exchange (ETDEWEB)

    Loring, Burlen; Karimabadi, Homa; Rortershteyn, Vadim


    The surface line integral convolution(LIC) visualization technique produces dense visualization of vector fields on arbitrary surfaces. We present a screen space surface LIC algorithm for use in distributed memory data parallel sort last rendering infrastructures. The motivations for our work are to support analysis of datasets that are too large to fit in the main memory of a single computer and compatibility with prevalent parallel scientific visualization tools such as ParaView and VisIt. By working in screen space using OpenGL we can leverage the computational power of GPUs when they are available and run without them when they are not. We address efficiency and performance issues that arise from the transformation of data from physical to screen space by selecting an alternate screen space domain decomposition. We analyze the algorithm's scaling behavior with and without GPUs on two high performance computing systems using data from turbulent plasma simulations.

  3. Artificial immune algorithm implementation for optimized multi-axis sculptured surface CNC machining (United States)

    Fountas, N. A.; Kechagias, J. D.; Vaxevanidis, N. M.


    This paper presents the results obtained by the implementation of an artificial immune algorithm to optimize standard multi-axis tool-paths applied to machine free-form surfaces. The investigation for its applicability was based on a full factorial experimental design addressing the two additional axes for tool inclination as independent variables whilst a multi-objective response was formulated by taking into consideration surface deviation and tool path time; objectives assessed directly from computer-aided manufacturing environment A standard sculptured part was developed by scratch considering its benchmark specifications and a cutting-edge surface machining tool-path was applied to study the effects of the pattern formulated when dynamically inclining a toroidal end-mill and guiding it towards the feed direction under fixed lead and tilt inclination angles. The results obtained form the series of the experiments were used for the fitness function creation the algorithm was about to sequentially evaluate. It was found that the artificial immune algorithm employed has the ability of attaining optimal values for inclination angles facilitating thus the complexity of such manufacturing process and ensuring full potentials in multi-axis machining modelling operations for producing enhanced CNC manufacturing programs. Results suggested that the proposed algorithm implementation may reduce the mean experimental objective value to 51.5%

  4. Hip-Hop Pop Art (United States)

    Talley, Clarence, Sr.


    Art has a way of helping students better understand and appreciate the world around them, particularly the things that are most important to them. Hip hop is one of those generational genres that capture the attention of young students like few other things do. Drawing on this genre to get students to create art is an excellent way to demonstrate…

  5. Fast centroid algorithm for determining the surface plasmon resonance angle using the fixed-boundary method

    International Nuclear Information System (INIS)

    Zhan, Shuyue; Wang, Xiaoping; Liu, Yuling


    To simplify the algorithm for determining the surface plasmon resonance (SPR) angle for special applications and development trends, a fast method for determining an SPR angle, called the fixed-boundary centroid algorithm, has been proposed. Two experiments were conducted to compare three centroid algorithms from the aspects of the operation time, sensitivity to shot noise, signal-to-noise ratio (SNR), resolution, and measurement range. Although the measurement range of this method was narrower, the other performance indices were all better than the other two centroid methods. This method has outstanding performance, high speed, good conformity, low error and a high SNR and resolution. It thus has the potential to be widely adopted

  6. A general rough-surface inversion algorithm: Theory and application to SAR data (United States)

    Moghaddam, M.


    Rough-surface inversion has significant applications in interpretation of SAR data obtained over bare soil surfaces and agricultural lands. Due to the sparsity of data and the large pixel size in SAR applications, it is not feasible to carry out inversions based on numerical scattering models. The alternative is to use parameter estimation techniques based on approximate analytical or empirical models. Hence, there are two issues to be addressed, namely, what model to choose and what estimation algorithm to apply. Here, a small perturbation model (SPM) is used to express the backscattering coefficients of the rough surface in terms of three surface parameters. The algorithm used to estimate these parameters is based on a nonlinear least-squares criterion. The least-squares optimization methods are widely used in estimation theory, but the distinguishing factor for SAR applications is incorporating the stochastic nature of both the unknown parameters and the data into formulation, which will be discussed in detail. The algorithm is tested with synthetic data, and several Newton-type least-squares minimization methods are discussed to compare their convergence characteristics. Finally, the algorithm is applied to multifrequency polarimetric SAR data obtained over some bare soil and agricultural fields. Results will be shown and compared to ground-truth measurements obtained from these areas. The strength of this general approach to inversion of SAR data is that it can be easily modified for use with any scattering model without changing any of the inversion steps. Note also that, for the same reason it is not limited to inversion of rough surfaces, and can be applied to any parameterized scattering process.

  7. Process optimization of rolling for zincked sheet technology using response surface methodology and genetic algorithm (United States)

    Ji, Liang-Bo; Chen, Fang


    Numerical simulation and intelligent optimization technology were adopted for rolling and extrusion of zincked sheet. By response surface methodology (RSM), genetic algorithm (GA) and data processing technology, an efficient optimization of process parameters for rolling of zincked sheet was investigated. The influence trend of roller gap, rolling speed and friction factor effects on reduction rate and plate shortening rate were analyzed firstly. Then a predictive response surface model for comprehensive quality index of part was created using RSM. Simulated and predicted values were compared. Through genetic algorithm method, the optimal process parameters for the forming of rolling were solved. They were verified and the optimum process parameters of rolling were obtained. It is feasible and effective.

  8. Predicting muscle forces during the propulsion phase of single leg triple hop test. (United States)

    Alvim, Felipe Costa; Lucareli, Paulo Roberto Garcia; Menegaldo, Luciano Luporini


    Functional biomechanical tests allow the assessment of musculoskeletal system impairments in a simple way. Muscle force synergies associated with movement can provide additional information for diagnosis. However, such forces cannot be directly measured noninvasively. This study aims to estimate muscle activations and forces exerted during the preparation phase of the single leg triple hop test. Two different approaches were tested: static optimization (SO) and computed muscle control (CMC). As an indirect validation, model-estimated muscle activations were compared with surface electromyography (EMG) of selected hip and thigh muscles. Ten physically healthy active women performed a series of jumps, and ground reaction forces, kinematics and EMG data were recorded. An existing OpenSim model with 92 musculotendon actuators was used to estimate muscle forces. Reflective markers data were processed using the OpenSim Inverse Kinematics tool. Residual Reduction Algorithm (RRA) was applied recursively before running the SO and CMC. For both, the same adjusted kinematics were used as inputs. Both approaches presented similar residuals amplitudes. SO showed a closer agreement between the estimated activations and the EMGs of some muscles. Due to inherent EMG methodological limitations, the superiority of SO in relation to CMC can be only hypothesized. It should be confirmed by conducting further studies comparing joint contact forces. The workflow presented in this study can be used to estimate muscle forces during the preparation phase of the single leg triple hop test and allows investigating muscle activation and coordination. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. CPU, GPU and FPGA Implementations of MALD: Ceramic Tile Surface Defects Detection Algorithm


    Matić, Tomislav; Aleksi, Ivan; Hocenski, Željko


    This paper addresses adjustments, implementation and performance comparison of the Moving Average with Local Difference (MALD) method for ceramic tile surface defects detection. Ceramic tile production process is completely autonomous, except the final stage where human eye is required for defects detection. Recent computational platform development and advances in machine vision provides us with several options for MALD algorithm implementation. In order to exploit the shortest execution tim...

  10. A new free-surface stabilization algorithm for geodynamical modelling: Theory and numerical tests (United States)

    Andrés-Martínez, Miguel; Morgan, Jason P.; Pérez-Gussinyé, Marta; Rüpke, Lars


    The surface of the solid Earth is effectively stress free in its subaerial portions, and hydrostatic beneath the oceans. Unfortunately, this type of boundary condition is difficult to treat computationally, and for computational convenience, numerical models have often used simpler approximations that do not involve a normal stress-loaded, shear-stress free top surface that is free to move. Viscous flow models with a computational free surface typically confront stability problems when the time step is bigger than the viscous relaxation time. The small time step required for stability (develop strategies that mitigate the stability problem by making larger (at least ∼10 Kyr) time steps stable and accurate. Here we present a new free-surface stabilization algorithm for finite element codes which solves the stability problem by adding to the Stokes formulation an intrinsic penalization term equivalent to a portion of the future load at the surface nodes. Our algorithm is straightforward to implement and can be used with both Eulerian or Lagrangian grids. It includes α and β parameters to respectively control both the vertical and the horizontal slope-dependent penalization terms, and uses Uzawa-like iterations to solve the resulting system at a cost comparable to a non-stress free surface formulation. Four tests were carried out in order to study the accuracy and the stability of the algorithm: (1) a decaying first-order sinusoidal topography test, (2) a decaying high-order sinusoidal topography test, (3) a Rayleigh-Taylor instability test, and (4) a steep-slope test. For these tests, we investigate which α and β parameters give the best results in terms of both accuracy and stability. We also compare the accuracy and the stability of our algorithm with a similar implicit approach recently developed by Kaus et al. (2010). We find that our algorithm is slightly more accurate and stable for steep slopes, and also conclude that, for longer time steps, the optimal

  11. An Efficient Surface Algorithm for Random-Particle Simulation of Vorticity and Heat Transport (United States)

    Smith, P. A.; Stansby, P. K.


    A new surface algorithm has been incorporated into the random-vortex method for the simulation of 2-dimensional laminar flow, in which vortex particles are deleted rather than reflected as they cross a solid surface. This involves a modification to the strength and random walk of newly created vortex particles. Computations of the early stages of symmetric, impulsively started flow around a circular cylinder for a wide range of Reynolds numbers demonstrate that the number of vortices required for convergence is substantially reduced. The method has been further extended to accommodate forced convective heat transfer where temperature particles are created at a surface to satisfy the condition of constant surface temperature. Vortex and temperature particles are handled together throughout each time step. For long runs, in which a steady state is reached, comparison is made with some time-averaged experimental heat transfer data for Reynolds numbers up to a few hundred. A Karman vortex street occurs at the higher Reynolds numbers.

  12. Multi-hop routing in wireless sensor networks an overview, taxonomy, and research challenges

    CERN Document Server

    Rani, Shalli


    This brief provides an overview of recent developments in multi-hop routing protocols for Wireless Sensor Networks (WSNs). It introduces the various classifications of routing protocols and lists the pros and cons of each category, going beyond the conceptual overview of routing classifications offered in other books. Recently many researchers have proposed numerous multi-hop routing protocols and thereby created a need for a book that provides its readers with an up-to-date road map of this research paradigm.   The authors present some of the most relevant results achieved by applying an algorithmic approach to the research on multi-hop routing protocols. The book covers measurements, experiences and lessons learned from the implementation of multi-hop communication prototypes. Furthermore, it describes future research challenges and as such serves as a useful guide for students and researchers alike.

  13. A Robust Inversion Algorithm for Surface Leaf and Soil Temperatures Using the Vegetation Clumping Index

    Directory of Open Access Journals (Sweden)

    Zunjian Bian


    Full Text Available The inversion of land surface component temperatures is an essential source of information for mapping heat fluxes and the angular normalization of thermal infrared (TIR observations. Leaf and soil temperatures can be retrieved using multiple-view-angle TIR observations. In a satellite-scale pixel, the clumping effect of vegetation is usually present, but it is not completely considered during the inversion process. Therefore, we introduced a simple inversion procedure that uses gap frequency with a clumping index (GCI for leaf and soil temperatures over both crop and forest canopies. Simulated datasets corresponding to turbid vegetation, regularly planted crops and randomly distributed forest were generated using a radiosity model and were used to test the proposed inversion algorithm. The results indicated that the GCI algorithm performed well for both crop and forest canopies, with root mean squared errors of less than 1.0 °C against simulated values. The proposed inversion algorithm was also validated using measured datasets over orchard, maize and wheat canopies. Similar results were achieved, demonstrating that using the clumping index can improve inversion results. In all evaluations, we recommend using the GCI algorithm as a foundation for future satellite-based applications due to its straightforward form and robust performance for both crop and forest canopies using the vegetation clumping index.

  14. Identifying the Right Surface for the Right Patient at the Right Time: Generation and Content Validation of an Algorithm for Support Surface Selection (United States)

    McNichol, Laurie; Watts, Carolyn; Mackey, Dianne; Beitz, Janice M.


    Support surfaces are an integral component of pressure ulcer prevention and treatment, but there is insufficient evidence to guide clinical decision making in this area. In an effort to provide clinical guidance for selecting support surfaces based on individual patient needs, the Wound, Ostomy and Continence Nurses Society (WOCN®) set out to develop an evidence- and consensus-based algorithm. A Task Force of clinical experts was identified who: 1) reviewed the literature and identified evidence for support surface use in the prevention and treatment of pressure ulcers; 2) developed supporting statements for essential components for the algorithm, 3) developed a draft algorithm for support surface selection; and 4) determined its face validity. A consensus panel of 20 key opinion leaders was then convened that: 1.) reviewed the draft algorithm and supporting statements, 2.) reached consensus on statements lacking robust supporting evidence, 3.) modified the draft algorithm and evaluated its content validity. The Content Validity Index (CVI) for the algorithm was strong (0.95 out of 1.0) with an overall mean score of 3.72 (out of 1 to 4), suggesting that the steps were appropriate to the purpose of the algorithm. To our knowledge, this is the first evidence and consensus based algorithm for support surface selection that has undergone content validation. PMID:25549306

  15. Identifying the right surface for the right patient at the right time: generation and content validation of an algorithm for support surface selection. (United States)

    McNichol, Laurie; Watts, Carolyn; Mackey, Dianne; Beitz, Janice M; Gray, Mikel


    Support surfaces are an integral component of pressure ulcer prevention and treatment, but there is insufficient evidence to guide clinical decision making in this area. In an effort to provide clinical guidance for selecting support surfaces based on individual patient needs, the Wound, Ostomy and Continence Nurses Society (WOCN®) set out to develop an evidence- and consensus-based algorithm. A Task Force of clinical experts was identified who: 1) reviewed the literature and identified evidence for support surface use in the prevention and treatment of pressure ulcers; 2) developed supporting statements for essential components for the algorithm, 3) developed a draft algorithm for support surface selection; and 4) determined its face validity. A consensus panel of 20 key opinion leaders was then convened that: 1.) reviewed the draft algorithm and supporting statements, 2.) reached consensus on statements lacking robust supporting evidence, 3.) modified the draft algorithm and evaluated its content validity. The Content Validity Index (CVI) for the algorithm was strong (0.95 out of 1.0) with an overall mean score of 3.72 (out of 1 to 4), suggesting that the steps were appropriate to the purpose of the algorithm. To our knowledge, this is the first evidence and consensus based algorithm for support surface selection that has undergone content validation.

  16. Cover Story: The Miseducation of Hip-Hop. (United States)

    Evelyn, Jamilah


    Some higher education officials believe that hip-hop music is eating away at the morals, and ultimately the classroom experience, of today's college students. Discusses why the gap exists between student and faculty attitudes toward hip-hop, how hip-hop music represents blackness, how people perceive hip-hop youth, the positive side of hip-hop,…

  17. Using subdivision surfaces and adaptive surface simplification algorithms for modeling chemical heterogeneities in geophysical flows (United States)

    Schmalzl, JöRg; Loddoch, Alexander


    We present a new method for investigating the transport of an active chemical component in a convective flow. We apply a three-dimensional front tracking method using a triangular mesh. For the refinement of the mesh we use subdivision surfaces which have been developed over the last decade primarily in the field of computer graphics. We present two different subdivision schemes and discuss their applicability to problems related to fluid dynamics. For adaptive refinement we propose a weight function based on the length of triangle edge and the sum of the angles of the triangle formed with neighboring triangles. In order to remove excess triangles we apply an adaptive surface simplification method based on quadric error metrics. We test these schemes by advecting a blob of passive material in a steady state flow in which the total volume is well preserved over a long time. Since for time-dependent flows the number of triangles may increase exponentially in time we propose the use of a subdivision scheme with diffusive properties in order to remove the small scale features of the chemical field. By doing so we are able to follow the evolution of a heavy chemical component in a vigorously convecting field. This calculation is aimed at the fate of a heavy layer at the Earth's core-mantle boundary. Since the viscosity variation with temperature is of key importance we also present a calculation with a strongly temperature-dependent viscosity.


    Directory of Open Access Journals (Sweden)

    A. L. Salih


    Full Text Available The analysis of the impact crater size-frequency distribution (CSFD is a well-established approach to the determination of the age of planetary surfaces. Classically, estimation of the CSFD is achieved by manual crater counting and size determination in spacecraft images, which, however, becomes very time-consuming for large surface areas and/or high image resolution. With increasing availability of high-resolution (nearly global image mosaics of planetary surfaces, a variety of automated methods for the detection of craters based on image data and/or topographic data have been developed. In this contribution a template-based crater detection algorithm is used which analyses image data acquired under known illumination conditions. Its results are used to establish the CSFD for the examined area, which is then used to estimate the absolute model age of the surface. The detection threshold of the automatic crater detection algorithm is calibrated based on a region with available manually determined CSFD such that the age inferred from the manual crater counts corresponds to the age inferred from the automatic crater detection results. With this detection threshold, the automatic crater detection algorithm can be applied to a much larger surface region around the calibration area. The proposed age estimation method is demonstrated for a Kaguya Terrain Camera image mosaic of 7.4 m per pixel resolution of the floor region of the lunar crater Tsiolkovsky, which consists of dark and flat mare basalt and has an area of nearly 10,000 km2. The region used for calibration, for which manual crater counts are available, has an area of 100 km2. In order to obtain a spatially resolved age map, CSFDs and surface ages are computed for overlapping quadratic regions of about 4.4 x 4.4 km2 size offset by a step width of 74 m. Our constructed surface age map of the floor of Tsiolkovsky shows age values of typically 3.2-3.3 Ga, while for small regions lower (down to

  19. A Simple and Universal Aerosol Retrieval Algorithm for Landsat Series Images Over Complex Surfaces (United States)

    Wei, Jing; Huang, Bo; Sun, Lin; Zhang, Zhaoyang; Wang, Lunche; Bilal, Muhammad


    Operational aerosol optical depth (AOD) products are available at coarse spatial resolutions from several to tens of kilometers. These resolutions limit the application of these products for monitoring atmospheric pollutants at the city level. Therefore, a simple, universal, and high-resolution (30 m) Landsat aerosol retrieval algorithm over complex urban surfaces is developed. The surface reflectance is estimated from a combination of top of atmosphere reflectance at short-wave infrared (2.22 μm) and Landsat 4-7 surface reflectance climate data records over densely vegetated areas and bright areas. The aerosol type is determined using the historical aerosol optical properties derived from the local urban Aerosol Robotic Network (AERONET) site (Beijing). AERONET ground-based sun photometer AOD measurements from five sites located in urban and rural areas are obtained to validate the AOD retrievals. Terra MODerate resolution Imaging Spectrometer Collection (C) 6 AOD products (MOD04) including the dark target (DT), the deep blue (DB), and the combined DT and DB (DT&DB) retrievals at 10 km spatial resolution are obtained for comparison purposes. Validation results show that the Landsat AOD retrievals at a 30 m resolution are well correlated with the AERONET AOD measurements (R2 = 0.932) and that approximately 77.46% of the retrievals fall within the expected error with a low mean absolute error of 0.090 and a root-mean-square error of 0.126. Comparison results show that Landsat AOD retrievals are overall better and less biased than MOD04 AOD products, indicating that the new algorithm is robust and performs well in AOD retrieval over complex surfaces. The new algorithm can provide continuous and detailed spatial distributions of AOD during both low and high aerosol loadings.

  20. An algorithm for detecting Trichodesmium surface blooms in the South Western Tropical Pacific

    Directory of Open Access Journals (Sweden)

    Y. Dandonneau


    Full Text Available Trichodesmium, a major colonial cyanobacterial nitrogen fixer, forms large blooms in NO3-depleted tropical oceans and enhances CO2 sequestration by the ocean due to its ability to fix dissolved dinitrogen. Thus, its importance in C and N cycles requires better estimates of its distribution at basin to global scales. However, existing algorithms to detect them from satellite have not yet been successful in the South Western Tropical Pacific (SP. Here, a novel algorithm (TRICHOdesmium SATellite based on radiance anomaly spectra (RAS observed in SeaWiFS imagery, is used to detect Trichodesmium during the austral summertime in the SP (5° S–25° S 160° E–170° W. Selected pixels are characterized by a restricted range of parameters quantifying RAS spectra (e.g. slope, intercept, curvature. The fraction of valid (non-cloudy pixels identified as Trichodesmium surface blooms in the region is low (between 0.01 and 0.2 %, but is about 100 times higher than deduced from previous algorithms. At daily scales in the SP, this fraction represents a total ocean surface area varying from 16 to 48 km2 in Winter and from 200 to 1000 km2 in Summer (and at monthly scale, from 500 to 1000 km2 in Winter and from 3100 to 10 890 km2 in Summer with a maximum of 26 432 km2 in January 1999. The daily distribution of Trichodesmium surface accumulations in the SP detected by TRICHOSAT is presented for the period 1998–2010 which demonstrates that the number of selected pixels peaks in November–February each year, consistent with field observations. This approach was validated with in situ observations of Trichodesmium surface accumulations in the Melanesian archipelago around New Caledonia, Vanuatu and Fiji Islands for the same period.

  1. Investigation of ALEGRA shock hydrocode algorithms using an exact free surface jet flow solution.

    Energy Technology Data Exchange (ETDEWEB)

    Hanks, Bradley Wright.; Robinson, Allen C


    Computational testing of the arbitrary Lagrangian-Eulerian shock physics code, ALEGRA, is presented using an exact solution that is very similar to a shaped charge jet flow. The solution is a steady, isentropic, subsonic free surface flow with significant compression and release and is provided as a steady state initial condition. There should be no shocks and no entropy production throughout the problem. The purpose of this test problem is to present a detailed and challenging computation in order to provide evidence for algorithmic strengths and weaknesses in ALEGRA which should be examined further. The results of this work are intended to be used to guide future algorithmic improvements in the spirit of test-driven development processes.

  2. Fundamentals of beer and hop chemistry

    Directory of Open Access Journals (Sweden)

    Denis De Keukeleire


    Full Text Available Beer brewing is an intricate process encompassing mixing and further elaboration of four essential raw materials, including barley malt, brewing water, hops and yeast. Particularly hops determine to a great extent typical beer qualities such as bitter taste, hoppy flavour, and foam stability. Conversely, hop-derived bitter acids account for an offending lightstruck flavour, which is formed on exposure of beer to light. These various processes are presented in detail, while due emphasis is placed on state-of-the-art hop technology, which provides brewers with efficient means to control bitterness, foam, and light-stability thereby allowing for the production of beers with consistent quality.

  3. Novel meta-surface design synthesis via nature-inspired optimization algorithms (United States)

    Bayraktar, Zikri

    Heuristic numerical optimization algorithms have been gaining interest over the years as the computational power of the digital computers increases at an unprecedented level every year. While mature techniques such as the Genetic Algorithm increase their application areas, researchers also try to come up with new algorithms by simply observing the highly tuned processes provided by the nature. In this dissertation, the well-known Genetic Algorithm (GA) will be utilized to tackle various novel electromagnetic optimization problems, along with parallel implementation of the Clonal Selection Algorithm (CLONALG) and newly introduced the Wind Driven Optimization (WDO) technique. The utility of the CLONALG parallelization and the efficiency of the WDO will be illustrated by applying them to multi-dimensional and multi-modal electromagnetics problems such as antenna design and metamaterial surface synthesis. One of the metamaterial application areas is the design synthesis of 90 degrees rotationally symmetric ultra-small unit cell artificial magnetic conducting (AMC) surfaces. AMCs are composite metallo-dielectric structures designed to behave as perfect magnetic conductors (PMC) over a certain frequency range, those exhibit a reflection coefficient magnitude of unity with an phase angle of zero degrees at the center of the band. The proposed designs consist of ultra small sized frequency selective surface (FSS) unit cells that are tightly packed and highly intertwined, yet achieve remarkable AMC band performance and field of view when compared to current state-of-the-art AMCs. In addition, planar double-sided AMC (DSAMC) structures are introduced and optimized as AMC ground planes for low profile antennas in composite platforms and separator slabs for vertical antenna applications. The proposed designs do not possess complete metallic ground planes, which makes them ideal for composite and multi-antenna systems. The versatility of the DSAMC slabs is also illustrated

  4. The Pseudomonas syringae type III effector HopF2 suppresses Arabidopsis stomatal immunity.

    Directory of Open Access Journals (Sweden)

    Brenden Hurley

    Full Text Available Pseudomonas syringae subverts plant immune signalling through injection of type III secreted effectors (T3SE into host cells. The T3SE HopF2 can disable Arabidopsis immunity through Its ADP-ribosyltransferase activity. Proteomic analysis of HopF2 interacting proteins identified a protein complex containing ATPases required for regulating stomatal aperture, suggesting HopF2 may manipulate stomatal immunity. Here we report HopF2 can inhibit stomatal immunity independent of its ADP-ribosyltransferase activity. Transgenic expression of HopF2 in Arabidopsis inhibits stomatal closing in response to P. syringae and increases the virulence of surface inoculated P. syringae. Further, transgenic expression of HopF2 inhibits flg22 induced reactive oxygen species production. Intriguingly, ADP-ribosyltransferase activity is dispensable for inhibiting stomatal immunity and flg22 induced reactive oxygen species. Together, this implies HopF2 may be a bifunctional T3SE with ADP-ribosyltransferase activity required for inhibiting apoplastic immunity and an independent function required to inhibit stomatal immunity.

  5. An algorithm for three-dimensional Monte-Carlo simulation of charge distribution at biofunctionalized surfaces

    KAUST Repository

    Bulyha, Alena


    In this work, a Monte-Carlo algorithm in the constant-voltage ensemble for the calculation of 3d charge concentrations at charged surfaces functionalized with biomolecules is presented. The motivation for this work is the theoretical understanding of biofunctionalized surfaces in nanowire field-effect biosensors (BioFETs). This work provides the simulation capability for the boundary layer that is crucial in the detection mechanism of these sensors; slight changes in the charge concentration in the boundary layer upon binding of analyte molecules modulate the conductance of nanowire transducers. The simulation of biofunctionalized surfaces poses special requirements on the Monte-Carlo simulations and these are addressed by the algorithm. The constant-voltage ensemble enables us to include the right boundary conditions; the dna strands can be rotated with respect to the surface; and several molecules can be placed in a single simulation box to achieve good statistics in the case of low ionic concentrations relevant in experiments. Simulation results are presented for the leading example of surfaces functionalized with pna and with single- and double-stranded dna in a sodium-chloride electrolyte. These quantitative results make it possible to quantify the screening of the biomolecule charge due to the counter-ions around the biomolecules and the electrical double layer. The resulting concentration profiles show a three-layer structure and non-trivial interactions between the electric double layer and the counter-ions. The numerical results are also important as a reference for the development of simpler screening models. © 2011 The Royal Society of Chemistry.

  6. An algorithm to use higher order invariants for modelling potential energy surface of nanoclusters (United States)

    Jindal, Shweta; Bulusu, Satya S.


    In order to fit potential energy surface (PES) of gold nanoclusters, we have integrated bispectrum features with artificial neural network (ANN) learning technique in this work. We have also devised an algorithm for selecting the frequencies that need to be coupled for extracting the phase information between different frequency bands. We have found that higher order invariant like bispectrum is highly efficient in exploring the PES as compared to other invariants. The sensitivity of bispectrum can also be exploited in acting as an order parameter for calculating many thermodynamic properties of nanoclusters.

  7. Homogenisation algorithm skill testing with synthetic global benchmarks for the International Surface Temperature Initiative (United States)

    Willet, Katherine; Venema, Victor; Williams, Claude; Aguilar, Enric; joliffe, Ian; Alexander, Lisa; Vincent, Lucie; Lund, Robert; Menne, Matt; Thorne, Peter; Auchmann, Renate; Warren, Rachel; Bronniman, Stefan; Thorarinsdotir, Thordis; Easterbrook, Steve; Gallagher, Colin; Lopardo, Giuseppina; Hausfather, Zeke; Berry, David


    Our surface temperature data are good enough to give us confidence that the world has warmed since 1880. However, they are not perfect - we cannot be precise in the amount of warming for the globe and especially for small regions or specific locations. Inhomogeneity (non-climate changes to the station record) is a major problem. While progress in detection of, and adjustment for inhomogeneities is continually advancing, monitoring effectiveness on large networks and gauging respective improvements in climate data quality is non-trivial. There is currently no internationally recognised means of robustly assessing the effectiveness of homogenisation methods on real data - and thus, the inhomogeneity uncertainty in those data. Here I present the work of the International Surface Temperature Initiative (ISTI; Benchmarking working group. The aim is to quantify homogenisation algorithm skill on the global scale against realistic benchmarks. This involves the creation of synthetic worlds of surface temperature data, deliberate contamination of these with known errors and then assessment of the ability of homogenisation algorithms to detect and remove these errors. The ultimate aim is threefold: quantifying uncertainties in surface temperature data; enabling more meaningful product intercomparison; and improving homogenisation methods. There are five components work: 1. Create 30000 synthetic benchmark stations that look and feel like the real global temperature network, but do not contain any inhomogeneities: analog clean-worlds. 2. Design a set of error models which mimic the main types of inhomogeneities found in practice, and combined them with the analog clean-worlds to give analog error-worlds. 3. Engage with dataset creators to run their homogenisation algorithms blind on the analog error-world stations as they have done with the real data. 4. Design an assessment framework to gauge the degree to which analog error-worlds are returned to

  8. Fasilitas Pelatihan dan Pergelaran Seni Tari Hip Hop di Surabaya


    Yanuar, Sandy


    Fasilitas Pelatihan dan Pergelaran Seni Tari Hip Hop di Surabaya merupakan fasilitas yang disediakan bagi semua penari Hip Hop di Surabaya untuk berlatih menari dan mempertunjukan tarian Hip Hop. Fasilitas ini tersedia bagi semua penari Hip Hop termasuk penari difable, mengingat kaum difable juga dapat menari Hip Hop. Namun karena di Surabaya belum memiliki fasilitas yang memadai bagi semua penari Hip Hop termasuk penari difable untuk menari dan memiliki tempat pertunjukan yang berkarakter Hi...

  9. Locating Critical Circular and Unconstrained Failure Surface in Slope Stability Analysis with Tailored Genetic Algorithm (United States)

    Pasik, Tomasz; van der Meij, Raymond


    This article presents an efficient search method for representative circular and unconstrained slip surfaces with the use of the tailored genetic algorithm. Searches for unconstrained slip planes with rigid equilibrium methods are yet uncommon in engineering practice, and little publications regarding truly free slip planes exist. The proposed method presents an effective procedure being the result of the right combination of initial population type, selection, crossover and mutation method. The procedure needs little computational effort to find the optimum, unconstrained slip plane. The methodology described in this paper is implemented using Mathematica. The implementation, along with further explanations, is fully presented so the results can be reproduced. Sample slope stability calculations are performed for four cases, along with a detailed result interpretation. Two cases are compared with analyses described in earlier publications. The remaining two are practical cases of slope stability analyses of dikes in Netherlands. These four cases show the benefits of analyzing slope stability with a rigid equilibrium method combined with a genetic algorithm. The paper concludes by describing possibilities and limitations of using the genetic algorithm in the context of the slope stability problem.

  10. Moderate Resolution Imaging Spectroradiometer (MODIS) MOD21 Land Surface Temperature and Emissivity Algorithm Theoretical Basis Document (United States)

    Hulley, G.; Malakar, N.; Hughes, T.; Islam, T.; Hook, S.


    This document outlines the theory and methodology for generating the Moderate Resolution Imaging Spectroradiometer (MODIS) Level-2 daily daytime and nighttime 1-km land surface temperature (LST) and emissivity product using the Temperature Emissivity Separation (TES) algorithm. The MODIS-TES (MOD21_L2) product, will include the LST and emissivity for three MODIS thermal infrared (TIR) bands 29, 31, and 32, and will be generated for data from the NASA-EOS AM and PM platforms. This is version 1.0 of the ATBD and the goal is maintain a 'living' version of this document with changes made when necessary. The current standard baseline MODIS LST products (MOD11*) are derived from the generalized split-window (SW) algorithm (Wan and Dozier 1996), which produces a 1-km LST product and two classification-based emissivities for bands 31 and 32; and a physics-based day/night algorithm (Wan and Li 1997), which produces a 5-km (C4) and 6-km (C5) LST product and emissivity for seven MODIS bands: 20, 22, 23, 29, 31-33.

  11. A comparison of semiglobal and local dense matching algorithms for surface reconstruction

    Directory of Open Access Journals (Sweden)

    E. Dall'Asta


    Full Text Available Encouraged by the growing interest in automatic 3D image-based reconstruction, the development and improvement of robust stereo matching techniques is one of the most investigated research topic of the last years in photogrammetry and computer vision. The paper is focused on the comparison of some stereo matching algorithms (local and global which are very popular both in photogrammetry and computer vision. In particular, the Semi-Global Matching (SGM, which realizes a pixel-wise matching and relies on the application of consistency constraints during the matching cost aggregation, will be discussed. The results of some tests performed on real and simulated stereo image datasets, evaluating in particular the accuracy of the obtained digital surface models, will be presented. Several algorithms and different implementation are considered in the comparison, using freeware software codes like MICMAC and OpenCV, commercial software (e.g. Agisoft PhotoScan and proprietary codes implementing Least Square e Semi-Global Matching algorithms. The comparisons will also consider the completeness and the level of detail within fine structures, and the reliability and repeatability of the obtainable data.

  12. A New Time-Hopping Multiple Access Communication System Simulator: Application to Ultra-Wideband

    Directory of Open Access Journals (Sweden)

    José M. Páez-Borrallo


    Full Text Available Time-hopping ultra-wideband technology presents some very attractive features for future indoor wireless systems in terms of achievable transmission rate and multiple access capabilities. This paper develops an algorithm to design time-hopping system simulators specially suitable for ultra-wideband, which takes advantage of some of the specific characteristics of this kind of systems. The algorithm allows an improvement of both the time capabilities and the achievable sampling rate and can be used to research into the influence of different parameters on the performance of the system. An additional result is the validation of a new general performance formula for time-hopping ultra-wideband systems with multipath channels.

  13. Derivation of Land Surface Temperature for Landsat-8 TIRS Using a Split Window Algorithm

    Directory of Open Access Journals (Sweden)

    Offer Rozenstein


    Full Text Available Land surface temperature (LST is one of the most important variables measured by satellite remote sensing. Public domain data are available from the newly operational Landsat-8 Thermal Infrared Sensor (TIRS. This paper presents an adjustment of the split window algorithm (SWA for TIRS that uses atmospheric transmittance and land surface emissivity (LSE as inputs. Various alternatives for estimating these SWA inputs are reviewed, and a sensitivity analysis of the SWA to misestimating the input parameters is performed. The accuracy of the current development was assessed using simulated Modtran data. The root mean square error (RMSE of the simulated LST was calculated as 0.93 °C. This SWA development is leading to progress in the determination of LST by Landsat-8 TIRS.

  14. Continuity Evaluation of Surface Retrieval Algorithms for ICESat-2/ATLAS Photon-Counting Laser Altimetry Data Products (United States)

    Leigh, H. W.; Magruder, L. A.


    The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission team is developing algorithms to produce along-track and gridded science data products for a variety of surface types, including land ice, sea ice, land, and ocean. The ATL03 data product will contain geolocated photons for each of the six beams, and will incorporate geophysical corrections as well as preliminary photon classifications (signal vs. background). Higher level along-track and gridded data products for various surface types are processed using the ATL03 geolocated photons. The data processing schemes developed for each of the surface types rely on independent surface finding algorithms optimized to identify ground, canopy, water, or ice surfaces, as appropriate for a particular geographical location. In such cases where multiple surface types are present in close proximity to one another (e.g. land-ocean interface), multiple surface finding algorithms may be employed to extract surfaces along the same segment of a lidar profile. This study examines the effects on continuity of the various surface finding algorithms, specifically for littoral/coastal areas. These areas are important to the cryospheric, hydrologic, and biospheric communities in that continuity between the respective surface elevation products is required to fully utilize the information provided by ICESat-2 and its Advanced Topographic Laser Altimeter System (ATLAS) instrument.

  15. Study on a resource allocation scheme in multi-hop MIMO-OFDM systems over lognormal-rayleigh compound channels

    Directory of Open Access Journals (Sweden)

    LIU Jun


    Full Text Available For new generation wireless communication networks,this paper studies the optimization of the capacity and end-to-end throughput of the MIMO-OFDM based multi-hop relay systems.A water-filling power allocation method is proposed to improve the channel capacity and the throughput of the MIMO-OFDM system based multi-hop relay system in the Lognormal-Rayleigh shadowing compound channels.Simulations on the capacity and throughput show that the water-filling algorithm can improve the system throughput effectively in the MIMO-OFDM multi-hop relay system.

  16. Pertunjukan Teater Karo Hip Hop Kontemporer KAI

    Directory of Open Access Journals (Sweden)

    Silvia Anggreni Purba


    Pertunjukan Teater Karo Hip Hop Kontemporer KAI. The performance of Karo Theater collaborated with Hip Hop stems from a simple idea to collaborate Karo cultural traditions with popular culture. The performances can be enjoyed without having limitation on the language and culture. The process of combining two different cultures is a form of hybrid culture, and it may occur due to the globalization process. Through the process of deposition of the observations and strong impression, this performance is then brought into the form of Hip Hop as a preferred form which is energetic, personal and global. This performance is part of a modern tragedy with its destructive character which has explored the emotion and has presented it to the audiences. The exploration of Karo cultural tradition and Hip Hop dance as a language of symbols is able to reinforce words. The movement is not revealed by the verbal phrase but is presented through the movement of Hip Hop dance. The interpretation of the legend and texts into movement is carried out through the training process at the laboratory as a searching process and experiment, and afterward can be realized by considering the basic elements of Hip Hop, Karo cultural elements and performance. Karo Hip Hop Theatre is expected to become a preferred aesthetic form of a modern theater without losing its tradition form. Keyword: a contemporary Karo theater, Hip Hop, hybrid culture.

  17. How Does a Hopping Kangaroo Breathe? (United States)

    Giuliodori, Mauricio J.; Lujan, Heidi L.; Janbaih, Hussein; DiCarlo, Stephen E.


    We developed a model to demonstrate how a hopping kangaroo breathes. Interestingly, a kangaroo uses less energy to breathe while hopping than while standing still. This occurs, in part, because rather than using muscle power to move air into and out of the lungs, air is pulled into (inspiration) and pushed out of (expiration) the lungs as the…

  18. Hip-hop and urban studies

    NARCIS (Netherlands)

    Jaffe, R.


    How can urban studies research engage fruitfully with hip-hop? This contribution responds to the essays by David Beer and Martin Lamotte on ‘street music’, urban ethnography and ghettoized communities. It discusses how a social science engagement with hip-hop texts might differ from cultural studies

  19. Hopping Conductivity Enhanced by Microwave Radiation

    International Nuclear Information System (INIS)

    Ovadyahu, Z


    Hopping conductivity is enhanced when exposed to microwave (MW) fields. Data taken on several Anderson-localized systems and granular-aluminium are presented to illustrate the generality of the phenomenon. It is suggested that the effect is due to a field-enhanced hopping, which is the ac version of a non-ohmic effect familiar from studies in the dc transport regime.

  20. Helicobacter pylori HopE and HopV porins present scarce expression among clinical isolates (United States)

    Lienlaf, Maritza; Morales, Juan Pablo; Díaz, María Inés; Díaz, Rodrigo; Bruce, Elsa; Siegel, Freddy; León, Gloria; Harris, Paul R; Venegas, Alejandro


    AIM: To evaluate how widely Helicobacter pylori (H. pylori) HopE and HopV porins are expressed among Chilean isolates and how seroprevalent they are among infected patients in Chile. METHODS: H. pylori hopE and hopV genes derived from strain CHCTX-1 were cloned by polymerase chain reaction (PCR), sequenced and expressed in Escherichia coli AD494 (DE3). Gel-purified porins were used to prepare polyclonal antibodies. The presence of both genes was tested by PCR in a collection of H. pylori clinical isolates and their expression was detected in lysates by immunoblotting. Immune responses against HopE, HopV and other H. pylori antigens in sera from infected and non-infected patients were tested by Western blotting using these sera as first antibody on recombinant H. pylori antigens. RESULTS: PCR and Western blotting assays revealed that 60 and 82 out of 130 Chilean isolates carried hopE and hopV genes, respectively, but only 16 and 9, respectively, expressed these porins. IgG serum immunoreactivity evaluation of 69 H. pylori-infected patients revealed that HopE and HopV were infrequently recognized (8.7% and 10.1% respectively) compared to H. pylori VacA (68.1%) and CagA (59.5%) antigens. Similar values were detected for IgA serum immunoreactivity against HopE (11.6%) and HopV (10.5%) although lower values for VacA (42%) and CagA (17.4%) were obtained when compared to the IgG response. CONCLUSION: A scarce expression of HopE and HopV among Chilean isolates was found, in agreement with the infrequent seroconversion against these antigens when tested in infected Chilean patients. PMID:20082477

  1. An Assessment of Surface Water Detection Algorithms for the Tahoua Region, Niger (United States)

    Herndon, K. E.; Muench, R.; Cherrington, E. A.; Griffin, R.


    The recent release of several global surface water datasets derived from remotely sensed data has allowed for unprecedented analysis of the earth's hydrologic processes at a global scale. However, some of these datasets fail to identify important sources of surface water, especially small ponds, in the Sahel, an arid region of Africa that forms a border zone between the Sahara Desert to the north, and the savannah to the south. These ponds may seem insignificant in the context of wider, global-scale hydrologic processes, but smaller sources of water are important for local and regional assessments. Particularly, these smaller water bodies are significant sources of hydration and irrigation for nomadic pastoralists and smallholder farmers throughout the Sahel. For this study, several methods of identifying surface water from Landsat 8 OLI and Sentinel 1 SAR data were compared to determine the most effective means of delineating these features in the Tahoua Region of Niger. The Modified Normalized Difference Water Index (MNDWI) had the best performance when validated against very high resolution World View 3 imagery, with an overall accuracy of 99.48%. This study reiterates the importance of region-specific algorithms and suggests that the MNDWI method may be the best for delineating surface water in the Sahelian ecozone, likely due to the nature of the exposed geology and lack of dense green vegetation.

  2. Force feedback effects on single molecule hopping and pulling experiments (United States)

    Rico-Pasto, M.; Pastor, I.; Ritort, F.


    Single-molecule experiments with optical tweezers have become an important tool to study the properties and mechanisms of biological systems, such as cells and nucleic acids. In particular, force unzipping experiments have been used to extract the thermodynamics and kinetics of folding and unfolding reactions. In hopping experiments, a molecule executes transitions between the unfolded and folded states at a preset value of the force [constant force mode (CFM) under force feedback] or trap position [passive mode (PM) without feedback] and the force-dependent kinetic rates extracted from the lifetime of each state (CFM) and the rupture force distributions (PM) using the Bell-Evans model. However, hopping experiments in the CFM are known to overestimate molecular distances and folding free energies for fast transitions compared to the response time of the feedback. In contrast, kinetic rate measurements from pulling experiments have been mostly done in the PM while the CFM is seldom implemented in pulling protocols. Here, we carry out hopping and pulling experiments in a short DNA hairpin in the PM and CFM at three different temperatures (6 °C, 25 °C, and 45 °C) exhibiting largely varying kinetic rates. As expected, we find that equilibrium hopping experiments in the CFM and PM perform well at 6 °C (where kinetics are slow), whereas the CFM overestimates molecular parameters at 45 °C (where kinetics are fast). In contrast, nonequilibrium pulling experiments perform well in both modes at all temperatures. This demonstrates that the same kind of feedback algorithm in the CFM leads to more reliable determination of the folding reaction parameters in irreversible pulling experiments.

  3. Thoracic cavity segmentation algorithm using multiorgan extraction and surface fitting in volumetric CT

    Energy Technology Data Exchange (ETDEWEB)

    Bae, JangPyo [Interdisciplinary Program, Bioengineering Major, Graduate School, Seoul National University, Seoul 110-744, South Korea and Department of Radiology, University of Ulsan College of Medicine, 388-1 Pungnap2-dong, Songpa-gu, Seoul 138-736 (Korea, Republic of); Kim, Namkug, E-mail:; Lee, Sang Min; Seo, Joon Beom [Department of Radiology, University of Ulsan College of Medicine, 388-1 Pungnap2-dong, Songpa-gu, Seoul 138-736 (Korea, Republic of); Kim, Hee Chan [Department of Biomedical Engineering, College of Medicine and Institute of Medical and Biological Engineering, Medical Research Center, Seoul National University, Seoul 110-744 (Korea, Republic of)


    Purpose: To develop and validate a semiautomatic segmentation method for thoracic cavity volumetry and mediastinum fat quantification of patients with chronic obstructive pulmonary disease. Methods: The thoracic cavity region was separated by segmenting multiorgans, namely, the rib, lung, heart, and diaphragm. To encompass various lung disease-induced variations, the inner thoracic wall and diaphragm were modeled by using a three-dimensional surface-fitting method. To improve the accuracy of the diaphragm surface model, the heart and its surrounding tissue were segmented by a two-stage level set method using a shape prior. To assess the accuracy of the proposed algorithm, the algorithm results of 50 patients were compared to the manual segmentation results of two experts with more than 5 years of experience (these manual results were confirmed by an expert thoracic radiologist). The proposed method was also compared to three state-of-the-art segmentation methods. The metrics used to evaluate segmentation accuracy were volumetric overlap ratio (VOR), false positive ratio on VOR (FPRV), false negative ratio on VOR (FNRV), average symmetric absolute surface distance (ASASD), average symmetric squared surface distance (ASSSD), and maximum symmetric surface distance (MSSD). Results: In terms of thoracic cavity volumetry, the mean ± SD VOR, FPRV, and FNRV of the proposed method were (98.17 ± 0.84)%, (0.49 ± 0.23)%, and (1.34 ± 0.83)%, respectively. The ASASD, ASSSD, and MSSD for the thoracic wall were 0.28 ± 0.12, 1.28 ± 0.53, and 23.91 ± 7.64 mm, respectively. The ASASD, ASSSD, and MSSD for the diaphragm surface were 1.73 ± 0.91, 3.92 ± 1.68, and 27.80 ± 10.63 mm, respectively. The proposed method performed significantly better than the other three methods in terms of VOR, ASASD, and ASSSD. Conclusions: The proposed semiautomatic thoracic cavity segmentation method, which extracts multiple organs (namely, the rib, thoracic wall, diaphragm, and heart

  4. Assessment of diverse algorithms applied on MODIS Aqua and Terra data over land surfaces in Europe (United States)

    Glantz, P.; Tesche, M.


    Beside an increase of greenhouse gases (e.g., carbon dioxide, methane and nitrous oxide) human activities (for instance fossil fuel and biomass burning) have lead to perturbation of the atmospheric content of aerosol particles. Aerosols exhibits high spatial and temporal variability in the atmosphere. Therefore, aerosol investigation for climate research and environmental control require the identification of source regions, their strength and aerosol type, which can be retrieved based on space-borne observations. The aim of the present study is to validate and evaluate AOT (aerosol optical thickness) and Ångström exponent, obtained with the SAER (Satellite AErosol Retrieval) algorithm for MODIS (MODerate resolution Imaging Spectroradiometer) Aqua and Terra calibrated level 1 data (1 km horizontal resolution at ground), against AERONET (AErosol RObotic NETwork) observations and MODIS Collection 5 (c005) standard product retrievals (10 km), respectively, over land surfaces in Europe for the seasons; early spring (period 1), mid spring (period 2) and summer (period 3). For several of the cases analyzed here the Aqua and Terra satellites passed the investigation area twice during a day. Thus, beside a variation in the sun elevation the satellite aerosol retrievals have also on a daily basis been performed with a significant variation in the satellite-viewing geometry. An inter-comparison of the two algorithms has also been performed. The validation with AERONET shows that the MODIS c005 retrieved AOT is, for the wavelengths 0.469 and 0.500 nm, on the whole within the expected uncertainty for one standard deviation of the MODIS retrievals over Europe (Δτ = ±0.05 ± 0.15τ). The SAER estimated AOT for the wavelength 0.443 nm also agree reasonable well with AERONET. Thus, the majority of the SAER AOT values are within the MODIS expected uncertainty range, although somewhat larger RMSD (root mean square deviation) occurs compared to the results obtained with the

  5. An Algorithm for Retrieving Land Surface Temperatures Using VIIRS Data in Combination with Multi-Sensors (United States)

    Xia, Lang; Mao, Kebiao; Ma, Ying; Zhao, Fen; Jiang, Lipeng; Shen, Xinyi; Qin, Zhihao


    A practical algorithm was proposed to retrieve land surface temperature (LST) from Visible Infrared Imager Radiometer Suite (VIIRS) data in mid-latitude regions. The key parameter transmittance is generally computed from water vapor content, while water vapor channel is absent in VIIRS data. In order to overcome this shortcoming, the water vapor content was obtained from Moderate Resolution Imaging Spectroradiometer (MODIS) data in this study. The analyses on the estimation errors of vapor content and emissivity indicate that when the water vapor errors are within the range of ±0.5 g/cm2, the mean retrieval error of the present algorithm is 0.634 K; while the land surface emissivity errors range from −0.005 to +0.005, the mean retrieval error is less than 1.0 K. Validation with the standard atmospheric simulation shows the average LST retrieval error for the twenty-three land types is 0.734 K, with a standard deviation value of 0.575 K. The comparison between the ground station LST data indicates the retrieval mean accuracy is −0.395 K, and the standard deviation value is 1.490 K in the regions with vegetation and water cover. Besides, the retrieval results of the test data have also been compared with the results measured by the National Oceanic and Atmospheric Administration (NOAA) VIIRS LST products, and the results indicate that 82.63% of the difference values are within the range of −1 to 1 K, and 17.37% of the difference values are within the range of ±2 to ±1 K. In a conclusion, with the advantages of multi-sensors taken fully exploited, more accurate results can be achieved in the retrieval of land surface temperature. PMID:25397919

  6. Therapeutic eyelids hygiene in the algorithms of prevention and treatment of ocular surface diseases

    Directory of Open Access Journals (Sweden)

    V. N. Trubilin


    Full Text Available When acute inflammation in anterior eye segment of a forward piece of an eye was stopped, ophthalmologists face a problem of absence of acute inflammation signs and at the same time complaints to the remain discomfort feelings. It causes dissatisfaction from the treatment. The complaints are typically caused by disturbance of tears productions. No accidental that the new group of diseases was allocated — the diseases of the ocular surface. Ocular surface is a difficult biologic system, including epithelium of the conjunctiva, cornea and limb, as well as the area costal margin eyelid and meibomian gland ducts. Pathological processes in conjunctiva, cornea and eyelids are linked with tears production. Ophthalmologists prescribes tears substitutions, providing short-term relief to patients. However, in respect that the lipid component of the tear film plays the key role in the preservation of its stability, eyelids hygiene is the basis for the treatment of dry eye associated with ocular surface diseases. Eyelids hygiene provides normal functioning of glands, restores the metabolic processes in skin and ensures the formation of a complete tear film. Protection of eyelids, especially the marginal edge from aggressive environmental agents, infections and parasites and is the basis for the prevention and treatment of blepharitis and dry eye syndrome. The most common clinical situations and algorithms of their treatment and prevention of dysfunction of the meibomian glands; demodectic blepharitis; seborrheic blepharitis; staphylococcal blepharitis; allergic blepharitis; barley and chalazion are discussed in the article. The prevention keratoconjunctival xerosis (before and postoperative period, caused by contact lenses, computer vision syndrome, remission after acute conjunctiva and cornea inflammation is also presented. The first part of the article presents the treatment and prevention algorithms for dysfunction of the meibomian glands, as well as

  7. Perceived bitterness character of beer in relation to hop variety and the impact of hop aroma. (United States)

    Oladokun, Olayide; James, Sue; Cowley, Trevor; Dehrmann, Frieda; Smart, Katherine; Hort, Joanne; Cook, David


    The impact of hop variety and hop aroma on perceived beer bitterness intensity and character was investigated using analytical and sensory methods. Beers made from malt extract were hopped with 3 distinctive hop varieties (Hersbrucker, East Kent Goldings, Zeus) to achieve equi-bitter levels. A trained sensory panel determined the bitterness character profile of each singly-hopped beer using a novel lexicon. Results showed different bitterness character profiles for each beer, with hop aroma also found to change the hop variety-derived bitterness character profiles of the beer. Rank-rating evaluations further showed the significant effect of hop aroma on selected key bitterness character attributes, by increasing perceived harsh and lingering bitterness, astringency, and bitterness intensity via cross-modal flavour interactions. This study advances understanding of the complexity of beer bitterness perception by demonstrating that hop variety selection and hop aroma both impact significantly on the perceived intensity and character of this key sensory attribute. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Analysis of Surface Plasmon Resonance Curves with a Novel Sigmoid-Asymmetric Fitting Algorithm

    Directory of Open Access Journals (Sweden)

    Daeho Jang


    Full Text Available The present study introduces a novel curve-fitting algorithm for surface plasmon resonance (SPR curves using a self-constructed, wedge-shaped beam type angular interrogation SPR spectroscopy technique. Previous fitting approaches such as asymmetric and polynomial equations are still unsatisfactory for analyzing full SPR curves and their use is limited to determining the resonance angle. In the present study, we developed a sigmoid-asymmetric equation that provides excellent curve-fitting for the whole SPR curve over a range of incident angles, including regions of the critical angle and resonance angle. Regardless of the bulk fluid type (i.e., water and air, the present sigmoid-asymmetric fitting exhibited nearly perfect matching with a full SPR curve, whereas the asymmetric and polynomial curve fitting methods did not. Because the present curve-fitting sigmoid-asymmetric equation can determine the critical angle as well as the resonance angle, the undesired effect caused by the bulk fluid refractive index was excluded by subtracting the critical angle from the resonance angle in real time. In conclusion, the proposed sigmoid-asymmetric curve-fitting algorithm for SPR curves is widely applicable to various SPR measurements, while excluding the effect of bulk fluids on the sensing layer.

  9. Characterization and noninvasive diagnosis of bladder cancer with serum surface enhanced Raman spectroscopy and genetic algorithms (United States)

    Li, Shaoxin; Li, Linfang; Zeng, Qiuyao; Zhang, Yanjiao; Guo, Zhouyi; Liu, Zhiming; Jin, Mei; Su, Chengkang; Lin, Lin; Xu, Junfa; Liu, Songhao


    This study aims to characterize and classify serum surface-enhanced Raman spectroscopy (SERS) spectra between bladder cancer patients and normal volunteers by genetic algorithms (GAs) combined with linear discriminate analysis (LDA). Two group serum SERS spectra excited with nanoparticles are collected from healthy volunteers (n = 36) and bladder cancer patients (n = 55). Six diagnostic Raman bands in the regions of 481-486, 682-687, 1018-1034, 1313-1323, 1450-1459 and 1582-1587 cm-1 related to proteins, nucleic acids and lipids are picked out with the GAs and LDA. By the diagnostic models built with the identified six Raman bands, the improved diagnostic sensitivity of 90.9% and specificity of 100% were acquired for classifying bladder cancer patients from normal serum SERS spectra. The results are superior to the sensitivity of 74.6% and specificity of 97.2% obtained with principal component analysis by the same serum SERS spectra dataset. Receiver operating characteristic (ROC) curves further confirmed the efficiency of diagnostic algorithm based on GA-LDA technique. This exploratory work demonstrates that the serum SERS associated with GA-LDA technique has enormous potential to characterize and non-invasively detect bladder cancer through peripheral blood.

  10. Development of an Aerosol Opacity Retrieval Algorithm for Use with Multi-Angle Land Surface Images (United States)

    Diner, D.; Paradise, S.; Martonchik, J.


    In 1998, the Multi-angle Imaging SpectroRadiometer (MISR) will fly aboard the EOS-AM1 spacecraft. MISR will enable unique methods for retrieving the properties of atmospheric aerosols, by providing global imagery of the Earth at nine viewing angles in four visible and near-IR spectral bands. As part of the MISR algorithm development, theoretical methods of analyzing multi-angle, multi-spectral data are being tested using images acquired by the airborne Advanced Solid-State Array Spectroradiometer (ASAS). In this paper we derive a method to be used over land surfaces for retrieving the change in opacity between spectral bands, which can then be used in conjunction with an aerosol model to derive a bound on absolute opacity.

  11. Application of response surface methodology (RSM) and genetic algorithm in minimizing warpage on side arm (United States)

    Raimee, N. A.; Fathullah, M.; Shayfull, Z.; Nasir, S. M.; Hazwan, M. H. M.


    The plastic injection moulding process produces large numbers of parts of high quality with great accuracy and quickly. It has widely used for production of plastic part with various shapes and geometries. Side arm is one of the product using injection moulding to manufacture it. However, there are some difficulties in adjusting the parameter variables which are mould temperature, melt temperature, packing pressure, packing time and cooling time as there are warpage happen at the tip part of side arm. Therefore, the work reported herein is about minimizing warpage on side arm product by optimizing the process parameter using Response Surface Methodology (RSM) and with additional artificial intelligence (AI) method which is Genetic Algorithm (GA).

  12. Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm

    International Nuclear Information System (INIS)

    Amanifard, N.; Mahnama, S. M.; Neshaei, S. A. L.; Mehrdad, M. A.; Farahani, M. H.


    This paper presents an incompressible smoothed particle hydrodynamics model to simulate wave propagation in a free surface flow. The Navier-Stokes equations are solved in a Lagrangian framework using a three-step fractional method. In the first step, a temporary velocity field is provided according to the relevant body forces. This velocity field is renewed in the second step to include the viscosity effects. A Poisson equation is employed in the third step as an alternative for the equation of state in order to evaluate pressure. This Poisson equation considers a trade-off between density and pressure which is utilized in the third step to impose the incompressibility effect. The computations are compared with the experimental as well as numerical data and a good agreement is observed. In order to validate proposed algorithm, a dam-break problem is solved as a benchmark solution and the computational results are compared with the previous numerical ones.



    上町, 亮介; KAMMACHI, Ryosuke


    In this paper, we describe about a study of dead-reckoning algorithm for mecanum wheel based mobile robot under various types of road surface. Because of mecanum wheel based mobile robot can move omni-direction by utilizing tire-road surface friction. Therefore depending on road surface condition, it is difficult to estimate accurate self-position by applying conventional dead-reckoning method. In order to overcome inaccuracy of conventional dead-reckoning method for mecanum wheel based mobil...

  14. Hopping models for ion conduction in noncrystals

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas


    semiconductors). These universalities are subject of much current interest, for instance interpreted in the context of simple hopping models. In the present paper we first discuss the temperature dependence of the dc conductivity in hopping models and the importance of the percolation phenomenon. Next......, the experimental (quasi)universality of the ac conductivity is discussed. It is shown that hopping models are able to reproduce the experimental finding that the response obeys time-temperature superposition, while at the same time a broad range of activation energies is involved in the conduction process. Again...

  15. A physics-based algorithm for retrieving land-surface emissivity and temperature from EOS/MODIS data

    International Nuclear Information System (INIS)

    Wan, Z.; Li, Z.L.


    The authors have developed a physics-based land-surface temperature (LST) algorithm for simultaneously retrieving surface band-averaged emissivities and temperatures from day/night pairs of MODIS (Moderate Resolution Imaging Spectroradiometer) data in seven thermal infrared bands. The set of 14 nonlinear equations in the algorithm is solved with the statistical regression method and the least-squares fit method. This new LST algorithm was tested with simulated MODIS data for 80 sets of band-averaged emissivities calculated from published spectral data of terrestrial materials in wide ranges of atmospheric and surface temperature conditions. Comprehensive sensitivity and error analysis has been made to evaluate the performance of the new LST algorithm and its dependence on variations in surface emissivity and temperature, upon atmospheric conditions, as well as the noise-equivalent temperature difference (NEΔT) and calibration accuracy specifications of the MODIS instrument. In cases with a systematic calibration error of 0.5%, the standard deviations of errors in retrieved surface daytime and nighttime temperatures fall between 0.4--0.5 K over a wide range of surface temperatures for mid-latitude summer conditions. The standard deviations of errors in retrieved emissivities in bands 31 and 32 (in the 10--12.5 microm IR spectral window region) are 0.009, and the maximum error in retrieved LST values falls between 2--3 K

  16. Hybrid of Natural Element Method (NEM with Genetic Algorithm (GA to find critical slip surface

    Directory of Open Access Journals (Sweden)

    Shahriar Shahrokhabadi


    Full Text Available One of the most important issues in geotechnical engineering is the slope stability analysis for determination of the factor of safety and the probable slip surface. Finite Element Method (FEM is well suited for numerical study of advanced geotechnical problems. However, mesh requirements of FEM creates some difficulties for solution processing in certain problems. Recently, motivated by these limitations, several new Meshfree methods such as Natural Element Method (NEM have been used to analyze engineering problems. This paper presents advantages of using NEM in 2D slope stability analysis and Genetic Algorithm (GA optimization to determine the probable slip surface and the related factor of safety. The stress field is produced under plane strain condition using natural element formulation to simulate material behavior analysis utilized in conjunction with a conventional limit equilibrium method. In order to justify the preciseness and convergence of the proposed method, two kinds of examples, homogenous and non-homogenous, are conducted and results are compared with FEM and conventional limit equilibrium methods. The results show the robustness of the NEM in slope stability analysis.

  17. A full waveform tomography algorithm for teleseismic body and surface waves in 2.5 dimensions (United States)

    Baker, B.; Roecker, S.


    We describe a 2.5-D, frequency domain, viscoelastic waveform tomography algorithm for imaging with seismograms of teleseismic body and surface waves recorded by quasi-linear arrays. The equations of motion are discretized with p-adaptive finite elements that allow for geometric flexibility and accurate solutions as a function of wavelength. Artificial forces are introduced into the media by specifying a known wavefield along the model edges and solving for the corresponding scattered field. Because of the relatively low frequency content of teleseismic data, regional scale tectonic settings can be parametrized with a modest number of variables and perturbations can be determined directly from a regularized Gauss-Newton system of equations. Waveforms generated by the forward problem compare well with analytic solutions for simple 1-D and 2-D media. Tests of different approaches to the inverse problem show that the use of an approximate Hessian serves to properly focus the scattered field. We also find that while full waveform inversion can provide significantly better resolution than standard techniques for both body and surface wave tomography modelled individually, joint inversion both enhances resolution and mitigates potential artefacts.

  18. Hip-hop, Onegin - pop! / Tatjana Aleksandrova

    Index Scriptorium Estoniae

    Aleksandrova, Tatjana, 1945-


    Erateatrikooli KS, mida juhib Svetlana Krassman, lavastus A. Pushkini poeemi "Jevgeni Onegin" motiividel. Noortelavastuse muusikalises seades kasutatakse klassikalise muusika aranzheeringuid ja räppi, kostüümidraamat koos hip-hop rõivastiiliga

  19. Degradation of hop bitter acids by fungi

    International Nuclear Information System (INIS)

    Huszcza, Ewa; Bartmanska, Agnieszka; Aniol, Miroslaw; Maczka, Wanda; Zolnierczyk, Anna; Wawrzenczyk, Czeslaw


    Nine fungal strains related to: Trametes versicolor, Nigrospora oryzae, Inonotus radiatus, Crumenulopsis sororia, Coryneum betulinum, Cryptosporiopsis radicicola, Fusarium equiseti, Rhodotorula glutinis and Candida parapsilosis were tested for their ability to degrade humulones and lupulones. The best results were obtained for T. versicolor culture, in which humulones and lupulones were fully degraded after 4 days of incubation in the dark or after 36 h in the light. The experiments were performed on a commercial hop extract and on sterilized spent hops

  20. Guided basin-hopping search of small boron clusters with density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Wei Chun; Yoon, Tiem Leong [School of Physics, Universiti Sains Malaysia, 11800 USM, Penang (Malaysia); Lim, Thong Leng [Faculty of Engineering and Technology, Multimedia University, Melacca Campus, 75450 Melaka (Malaysia)


    The search for the ground state structures of Boron clusters has been a difficult computational task due to the unique metalloid nature of Boron atom. Previous research works had overcome the problem in the search of the Boron ground-state structures by adding symmetry constraints prior to the process of locating the local minima in the potential energy surface (PES) of the Boron clusters. In this work, we shown that, with the deployment of a novel computational approach that incorporates density functional theory (DFT) into a guided global optimization search algorithm based on basin-hopping, it is possible to directly locate the local minima of small Boron clusters in the PES at the DFT level. The ground-state structures search algorithm as proposed in this work is initiated randomly and needs not a priori symmetry constraint artificially imposed throughout the search process. Small sized Boron clusters so obtained compare well to the results obtained by similar calculations in the literature. The electronic properties of each structures obtained are calculated within the DFT framework.

  1. Guided basin-hopping search of small boron clusters with density functional theory

    International Nuclear Information System (INIS)

    Ng, Wei Chun; Yoon, Tiem Leong; Lim, Thong Leng


    The search for the ground state structures of Boron clusters has been a difficult computational task due to the unique metalloid nature of Boron atom. Previous research works had overcome the problem in the search of the Boron ground-state structures by adding symmetry constraints prior to the process of locating the local minima in the potential energy surface (PES) of the Boron clusters. In this work, we shown that, with the deployment of a novel computational approach that incorporates density functional theory (DFT) into a guided global optimization search algorithm based on basin-hopping, it is possible to directly locate the local minima of small Boron clusters in the PES at the DFT level. The ground-state structures search algorithm as proposed in this work is initiated randomly and needs not a priori symmetry constraint artificially imposed throughout the search process. Small sized Boron clusters so obtained compare well to the results obtained by similar calculations in the literature. The electronic properties of each structures obtained are calculated within the DFT framework


    Directory of Open Access Journals (Sweden)

    V. N. Trubilin


    problem of modern ophthalmology.Part 1 — Trubilin VN, Poluninа EG, Kurenkov VV, Kapkova SG, Markova EY, Therapeutic eyelids hygiene in the algorithms of prevention and treatment of ocular surface diseases. Ophthalmology in Russia. 2016;13(2:122–127 doi: 10.18008/1816–5095– 2016–2–122–127

  3. HIP HOP for HIV Awareness: Using Hip Hop Culture to Promote Community-Level HIV Prevention (United States)

    Hill, Mandy J.; Hallmark, Camden J.; McNeese, Marlene; Blue, Nike; Ross, Michael W.


    The goal of this paper was to determine the effectiveness of the HIP HOP for HIV Awareness intervention, an innovative model utilising an exchange of an HIV test for a hip hop concert ticket, in a metropolitan city among African American youth and young adults. A subset of intervention participants participated in standardised testing, sex…

  4. Improving the sensitivity of the hop index in patients with an ACL deficient knee by transforming the hop distance scores

    Directory of Open Access Journals (Sweden)

    Thomas Scott G


    Full Text Available Abstract Background The one leg hop for distance is one of the most commonly employed functional tests utilized in the evaluation of the ACL deficient and reconstructed patient. While the reliability of the hop test scores has been well established, validity studies have revealed low sensitivity rates in detecting functional limitations using the hop index (the ratio or percentage of limb performance. However, the impact of the inherent limitations associated with the hop index have not been investigated to date. One specific limitation relates to the impact of the differences in the underlying hop distance scores. Therefore, this pilot study set out to determine: 1 the impact that between limb differences in hop distance has on the sensitivity of the hop index in detecting functional limitations and; 2 whether a logarithmic transformation of the underlying hop distance scores improves the sensitivity of the hop index. Methods A cross sectional design involving the evaluation of one leg hop for distance performance in a consecutive sample of 10 ACL deficient males with an isolated ACL tear awaiting reconstructive surgery and nine gender, age-matched controls. Results In the ACL deficient, the hop index was associated with the distance hopped on the non-injured limb (r = -0.66, p = 0.04 but not on the injured limb. Transformation (logarithmic of the hop distance scores and re-calculation of the hop index using the transformed scores increased the sensitivity of the hop index in the detection of functional limitations from 20 to 60% and 50 to 70% using the normal limb symmetry reference norms of ≥ 85% and 90% respectively. Conclusion The distance hopped on the non-injured limb is a critical factor in detecting functional limitations using the hop index in patients with an ACL deficient knee. Logarithmic transformation of the hop distance scores minimizes the effect of the arithmetic differences between limbs however; the sensitivity of the hop

  5. Numerical thermal analysis and optimization of multi-chip LED module using response surface methodology and genetic algorithm

    NARCIS (Netherlands)

    Tang, Hong Yu; Ye, Huai Yu; Chen, Xian Ping; Qian, Cheng; Fan, Xue Jun; Zhang, G.Q.


    In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the

  6. Optimization of artificial neural network models through genetic algorithms for surface ozone concentration forecasting. (United States)

    Pires, J C M; Gonçalves, B; Azevedo, F G; Carneiro, A P; Rego, N; Assembleia, A J B; Lima, J F B; Silva, P A; Alves, C; Martins, F G


    This study proposes three methodologies to define artificial neural network models through genetic algorithms (GAs) to predict the next-day hourly average surface ozone (O(3)) concentrations. GAs were applied to define the activation function in hidden layer and the number of hidden neurons. Two of the methodologies define threshold models, which assume that the behaviour of the dependent variable (O(3) concentrations) changes when it enters in a different regime (two and four regimes were considered in this study). The change from one regime to another depends on a specific value (threshold value) of an explanatory variable (threshold variable), which is also defined by GAs. The predictor variables were the hourly average concentrations of carbon monoxide (CO), nitrogen oxide, nitrogen dioxide (NO(2)), and O(3) (recorded in the previous day at an urban site with traffic influence) and also meteorological data (hourly averages of temperature, solar radiation, relative humidity and wind speed). The study was performed for the period from May to August 2004. Several models were achieved and only the best model of each methodology was analysed. In threshold models, the variables selected by GAs to define the O(3) regimes were temperature, CO and NO(2) concentrations, due to their importance in O(3) chemistry in an urban atmosphere. In the prediction of O(3) concentrations, the threshold model that considers two regimes was the one that fitted the data most efficiently.

  7. An integrated study of surface roughness in EDM process using regression analysis and GSO algorithm (United States)

    Zainal, Nurezayana; Zain, Azlan Mohd; Sharif, Safian; Nuzly Abdull Hamed, Haza; Mohamad Yusuf, Suhaila


    The aim of this study is to develop an integrated study of surface roughness (Ra) in the die-sinking electrical discharge machining (EDM) process of Ti-6AL-4V titanium alloy with positive polarity of copper-tungsten (Cu-W) electrode. Regression analysis and glowworm swarm optimization (GSO) algorithm were considered for modelling and optimization process. Pulse on time (A), pulse off time (B), peak current (C) and servo voltage (D) were selected as the machining parameters with various levels. The experiments have been conducted based on the two levels of full factorial design with an added center point design of experiments (DOE). Moreover, mathematical models with linear and 2 factor interaction (2FI) effects of the parameters chosen were developed. The validity test of the fit and the adequacy of the developed mathematical models have been carried out by using analysis of variance (ANOVA) and F-test. The statistical analysis showed that the 2FI model outperformed with the most minimal value of Ra compared to the linear model and experimental result.

  8. A wavelet-based PWTD algorithm-accelerated time domain surface integral equation solver

    KAUST Repository

    Liu, Yang


    © 2015 IEEE. The multilevel plane-wave time-domain (PWTD) algorithm allows for fast and accurate analysis of transient scattering from, and radiation by, electrically large and complex structures. When used in tandem with marching-on-in-time (MOT)-based surface integral equation (SIE) solvers, it reduces the computational and memory costs of transient analysis from equation and equation to equation and equation, respectively, where Nt and Ns denote the number of temporal and spatial unknowns (Ergin et al., IEEE Trans. Antennas Mag., 41, 39-52, 1999). In the past, PWTD-accelerated MOT-SIE solvers have been applied to transient problems involving half million spatial unknowns (Shanker et al., IEEE Trans. Antennas Propag., 51, 628-641, 2003). Recently, a scalable parallel PWTD-accelerated MOT-SIE solver that leverages a hiearchical parallelization strategy has been developed and successfully applied to the transient problems involving ten million spatial unknowns (Liu et. al., in URSI Digest, 2013). We further enhanced the capabilities of this solver by implementing a compression scheme based on local cosine wavelet bases (LCBs) that exploits the sparsity in the temporal dimension (Liu et. al., in URSI Digest, 2014). Specifically, the LCB compression scheme was used to reduce the memory requirement of the PWTD ray data and computational cost of operations in the PWTD translation stage.



    Marić, Sanja


    V diplomskem delu smo raziskovali, kako so se hip hop oblačila razvijala skozi obdobja v hip hop kulturi. V teoretičnem deli smo ugotavljali ozadje in dejavnike, ki so vplivali na razvoj hip hop kulture, v empiričnem delu diplomske naloge pa smo izvedli anketni vprašalnik z glavnimi akterji hip hop kulture na slovenski hip hop sceni. Rezultati, ki smo jih dobili, kažejo da so imela oblačila velik vpliv na prepoznavnost in razvoj hip hop kulture po celem svetu. K temu so največ pripomogli ustv...

  10. An Automated Algorithm to Screen Massive Training Samples for a Global Impervious Surface Classification (United States)

    Tan, Bin; Brown de Colstoun, Eric; Wolfe, Robert E.; Tilton, James C.; Huang, Chengquan; Smith, Sarah E.


    An algorithm is developed to automatically screen the outliers from massive training samples for Global Land Survey - Imperviousness Mapping Project (GLS-IMP). GLS-IMP is to produce a global 30 m spatial resolution impervious cover data set for years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. This unprecedented high resolution impervious cover data set is not only significant to the urbanization studies but also desired by the global carbon, hydrology, and energy balance researches. A supervised classification method, regression tree, is applied in this project. A set of accurate training samples is the key to the supervised classifications. Here we developed the global scale training samples from 1 m or so resolution fine resolution satellite data (Quickbird and Worldview2), and then aggregate the fine resolution impervious cover map to 30 m resolution. In order to improve the classification accuracy, the training samples should be screened before used to train the regression tree. It is impossible to manually screen 30 m resolution training samples collected globally. For example, in Europe only, there are 174 training sites. The size of the sites ranges from 4.5 km by 4.5 km to 8.1 km by 3.6 km. The amount training samples are over six millions. Therefore, we develop this automated statistic based algorithm to screen the training samples in two levels: site and scene level. At the site level, all the training samples are divided to 10 groups according to the percentage of the impervious surface within a sample pixel. The samples following in each 10% forms one group. For each group, both univariate and multivariate outliers are detected and removed. Then the screen process escalates to the scene level. A similar screen process but with a looser threshold is applied on the scene level considering the possible variance due to the site difference. We do not perform the screen process across the scenes because the scenes might vary due to

  11. Improving Limit Surface Search Algorithms in RAVEN Using Acceleration Schemes: Level II Milestone

    Energy Technology Data Exchange (ETDEWEB)

    Alfonsi, Andrea [Idaho National Laboratory (INL), Idaho Falls, ID (United States); Rabiti, Cristian [Idaho National Laboratory (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Laboratory (INL), Idaho Falls, ID (United States); Cogliati, Joshua Joseph [Idaho National Laboratory (INL), Idaho Falls, ID (United States); Sen, Ramazan Sonat [Idaho National Laboratory (INL), Idaho Falls, ID (United States); Smith, Curtis Lee [Idaho National Laboratory (INL), Idaho Falls, ID (United States)


    The RAVEN code is becoming a comprehensive tool to perform Probabilistic Risk Assessment (PRA); Uncertainty Quantification (UQ) and Propagation; and Verification and Validation (V&V). The RAVEN code is being developed to support the Risk-Informed Safety Margin Characterization (RISMC) pathway by developing an advanced set of methodologies and algorithms for use in advanced risk analysis. The RISMC approach uses system simulator codes applied to stochastic analysis tools. The fundamental idea behind this coupling approach to perturb (by employing sampling strategies) timing and sequencing of events, internal parameters of the system codes (i.e., uncertain parameters of the physics model) and initial conditions to estimate values ranges and associated probabilities of figures of merit of interest for engineering and safety (e.g. core damage probability, etc.). This approach applied to complex systems such as nuclear power plants requires performing a series of computationally expensive simulation runs. The large computational burden is caused by the large set of (uncertain) parameters characterizing those systems. Consequently, exploring the uncertain/parametric domain, with a good level of confidence, is generally not affordable, considering the limited computational resources that are currently available. In addition, the recent tendency to develop newer tools, characterized by higher accuracy and larger computational resources (if compared with the presently used legacy codes, that have been developed decades ago), has made this issue even more compelling. In order to overcome to these limitations, the strategy for the exploration of the uncertain/parametric space needs to use at best the computational resources focusing the computational effort in those regions of the uncertain/parametric space that are “interesting” (e.g., risk-significant regions of the input space) with respect the targeted Figures Of Merit (FOM): for example, the failure of the system

  12. An efficient and robust algorithm for parallel groupwise registration of bone surfaces

    NARCIS (Netherlands)

    van de Giessen, Martijn; Vos, Frans M.; Grimbergen, Cornelis A.; van Vliet, Lucas J.; Streekstra, Geert J.


    In this paper a novel groupwise registration algorithm is proposed for the unbiased registration of a large number of densely sampled point clouds. The method fits an evolving mean shape to each of the example point clouds thereby minimizing the total deformation. The registration algorithm

  13. A Case Study on Maximizing Aqua Feed Pellet Properties Using Response Surface Methodology and Genetic Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Tumuluru, Jaya


    Aims: The present case study is on maximizing the aqua feed properties using response surface methodology and genetic algorithm. Study Design: Effect of extrusion process variables like screw speed, L/D ratio, barrel temperature, and feed moisture content were analyzed to maximize the aqua feed properties like water stability, true density, and expansion ratio. Place and Duration of Study: This study was carried out in the Department of Agricultural and Food Engineering, Indian Institute of Technology, Kharagpur, India. Methodology: A variable length single screw extruder was used in the study. The process variables selected were screw speed (rpm), length-to-diameter (L/D) ratio, barrel temperature (degrees C), and feed moisture content (%). The pelletized aqua feed was analyzed for physical properties like water stability (WS), true density (TD), and expansion ratio (ER). Extrusion experimental data was collected by based on central composite design. The experimental data was further analyzed using response surface methodology (RSM) and genetic algorithm (GA) for maximizing feed properties. Results: Regression equations developed for the experimental data has adequately described the effect of process variables on the physical properties with coefficient of determination values (R2) of > 0.95. RSM analysis indicated WS, ER, and TD were maximized at L/D ratio of 12-13, screw speed of 60-80 rpm, feed moisture content of 30-40%, and barrel temperature of = 80 degrees C for ER and TD and > 90 degrees C for WS. Based on GA analysis, a maxium WS of 98.10% was predicted at a screw speed of 96.71 rpm, L/D radio of 13.67, barrel temperature of 96.26 degrees C, and feed moisture content of 33.55%. Maximum ER and TD of 0.99 and 1346.9 kg/m3 was also predicted at screw speed of 60.37 and 90.24 rpm, L/D ratio of 12.18 and 13.52, barrel temperature of 68.50 and 64.88 degrees C, and medium feed moisture content of 33.61 and 38.36%. Conclusion: The present data analysis indicated

  14. Switched diversity strategies for dual-hop amplify-and-forward relaying systems

    KAUST Repository

    Gaaloul, Fakhreddine


    This study investigates different receive single-branch switch-based diversity schemes for dual-hop amplify-and-forward relaying networks. Specifically, three receive processing algorithms are adopted, in which the receive branch is selected using the arbitrary selection algorithm, the switching algorithm, or the switching algorithm with post-examining best branch selection. The identification of the receive branch is carried out for two different system models. For the first model, a single-antenna relaying station is used in conjunction with a multiple-antenna transceiver, where the processing is performed independently of the first hop-fading conditions. The second model suggests the use of parallel deployment of single-antenna relays to transfer information from a multiple-antenna transmitter to a single-antenna receiver, where the active relaying station is determined based on the pre-combining end-to-end fading conditions. Performance comparisons for various transmission scenarios on the first hop are presented using new formulations for the statistics of the combined signal-to-noise ratio. Simulation results are also provided to validate the mathematical development and to verify the numerical computations. © 2012 The Institution of Engineering and Technology.

  15. Dynamic Water Surface Detection Algorithm Applied on PROBA-V Multispectral Data

    Directory of Open Access Journals (Sweden)

    Luc Bertels


    Full Text Available Water body detection worldwide using spaceborne remote sensing is a challenging task. A global scale multi-temporal and multi-spectral image analysis method for water body detection was developed. The PROBA-V microsatellite has been fully operational since December 2013 and delivers daily near-global synthesis with a spatial resolution of 1 km and 333 m. The Red, Near-InfRared (NIR and Short Wave InfRared (SWIR bands of the atmospherically corrected 10-day synthesis images are first Hue, Saturation and Value (HSV color transformed and subsequently used in a decision tree classification for water body detection. To minimize commission errors four additional data layers are used: the Normalized Difference Vegetation Index (NDVI, Water Body Potential Mask (WBPM, Permanent Glacier Mask (PGM and Volcanic Soil Mask (VSM. Threshold values on the hue and value bands, expressed by a parabolic function, are used to detect the water bodies. Beside the water bodies layer, a quality layer, based on the water bodies occurrences, is available in the output product. The performance of the Water Bodies Detection Algorithm (WBDA was assessed using Landsat 8 scenes over 15 regions selected worldwide. A mean Commission Error (CE of 1.5% was obtained while a mean Omission Error (OE of 15.4% was obtained for minimum Water Surface Ratio (WSR = 0.5 and drops to 9.8% for minimum WSR = 0.6. Here, WSR is defined as the fraction of the PROBA-V pixel covered by water as derived from high spatial resolution images, e.g., Landsat 8. Both the CE = 1.5% and OE = 9.8% (WSR = 0.6 fall within the user requirements of 15%. The WBDA is fully operational in the Copernicus Global Land Service and products are freely available.

  16. Real-time intelligent pattern recognition algorithm for surface EMG signals

    Directory of Open Access Journals (Sweden)

    Jahed Mehran


    Full Text Available Abstract Background Electromyography (EMG is the study of muscle function through the inquiry of electrical signals that the muscles emanate. EMG signals collected from the surface of the skin (Surface Electromyogram: sEMG can be used in different applications such as recognizing musculoskeletal neural based patterns intercepted for hand prosthesis movements. Current systems designed for controlling the prosthetic hands either have limited functions or can only be used to perform simple movements or use excessive amount of electrodes in order to achieve acceptable results. In an attempt to overcome these problems we have proposed an intelligent system to recognize hand movements and have provided a user assessment routine to evaluate the correctness of executed movements. Methods We propose to use an intelligent approach based on adaptive neuro-fuzzy inference system (ANFIS integrated with a real-time learning scheme to identify hand motion commands. For this purpose and to consider the effect of user evaluation on recognizing hand movements, vision feedback is applied to increase the capability of our system. By using this scheme the user may assess the correctness of the performed hand movement. In this work a hybrid method for training fuzzy system, consisting of back-propagation (BP and least mean square (LMS is utilized. Also in order to optimize the number of fuzzy rules, a subtractive clustering algorithm has been developed. To design an effective system, we consider a conventional scheme of EMG pattern recognition system. To design this system we propose to use two different sets of EMG features, namely time domain (TD and time-frequency representation (TFR. Also in order to decrease the undesirable effects of the dimension of these feature sets, principle component analysis (PCA is utilized. Results In this study, the myoelectric signals considered for classification consists of six unique hand movements. Features chosen for EMG signal

  17. Agrochemical lead optimization by scaffold hopping. (United States)

    Lamberth, Clemens


    Scaffold hopping, the exchange of a specific portion of a potential active ingredient with another substructure with the aim of finding isofunctional molecular structures with significantly different molecular backbones, often offers the chance in lead discovery or optimization to mitigate problems related to toxicity, intellectual property, and insufficient potency or stability. Scaffold hopping tools such as isosteric ring replacement including 1,3 nitrogen shift and cyclic imine-amide isosterism, but also ring opening and ring closure approaches, functional group isosterism, reversion of functional groups, chain shortening, chain lengthening, and scaffolds delivered by natural products, have become a permanent fixture of the innovation and optimization process in crop protection research. Their appropriate use will be explained through examples of success stories in the field of agrochemistry. Analogies to, but also differences from, the main categories of scaffold hopping in medicinal drug discovery are discussed. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  18. Plasmodium falciparum Hop (PfHop Interacts with the Hsp70 Chaperone in a Nucleotide-Dependent Fashion and Exhibits Ligand Selectivity.

    Directory of Open Access Journals (Sweden)

    Tawanda Zininga

    Full Text Available Heat shock proteins (Hsps play an important role in the development and pathogenicity of malaria parasites. One of the most prominent functions of Hsps is to facilitate the folding of other proteins. Hsps are thought to play a crucial role when malaria parasites invade their host cells and during their subsequent development in hepatocytes and red blood cells. It is thought that Hsps maintain proteostasis under the unfavourable conditions that malaria parasites encounter in the host environment. Although heat shock protein 70 (Hsp70 is capable of independent folding of some proteins, its functional cooperation with heat shock protein 90 (Hsp90 facilitates folding of some proteins such as kinases and steroid hormone receptors into their fully functional forms. The cooperation of Hsp70 and Hsp90 occurs through an adaptor protein called Hsp70-Hsp90 organising protein (Hop. We previously characterised the Hop protein from Plasmodium falciparum (PfHop. We observed that the protein co-localised with the cytosol-localised chaperones, PfHsp70-1 and PfHsp90 at the blood stages of the malaria parasite. In the current study, we demonstrated that PfHop is a stress-inducible protein. We further explored the direct interaction between PfHop and PfHsp70-1 using far Western and surface plasmon resonance (SPR analyses. The interaction of the two proteins was further validated by co-immunoprecipitation studies. We observed that PfHop and PfHsp70-1 associate in the absence and presence of either ATP or ADP. However, ADP appears to promote the association of the two proteins better than ATP. In addition, we investigated the specific interaction between PfHop TPR subdomains and PfHsp70-1/ PfHsp90, using a split-GFP approach. This method allowed us to observe that TPR1 and TPR2B subdomains of PfHop bind preferentially to the C-terminus of PfHsp70-1 compared to PfHsp90. Conversely, the TPR2A motif preferentially interacted with the C-terminus of PfHsp90. Finally, we

  19. An Improved Mono-Window Algorithm for Land Surface Temperature Retrieval from Landsat 8 Thermal Infrared Sensor Data

    Directory of Open Access Journals (Sweden)

    Fei Wang


    Full Text Available The successful launch of the Landsat 8 satellite with two thermal infrared bands on February 11, 2013, for continuous Earth observation provided another opportunity for remote sensing of land surface temperature (LST. However, calibration notices issued by the United States Geological Survey (USGS indicated that data from the Landsat 8 Thermal Infrared Sensor (TIRS Band 11 have large uncertainty and suggested using TIRS Band 10 data as a single spectral band for LST estimation. In this study, we presented an improved mono-window (IMW algorithm for LST retrieval from the Landsat 8 TIRS Band 10 data. Three essential parameters (ground emissivity, atmospheric transmittance and effective mean atmospheric temperature were required for the IMW algorithm to retrieve LST. A new method was proposed to estimate the parameter of effective mean atmospheric temperature from local meteorological data. The other two essential parameters could be both estimated through the so-called land cover approach. Sensitivity analysis conducted for the IMW algorithm revealed that the possible error in estimating the required atmospheric water vapor content has the most significant impact on the probable LST estimation error. Under moderate errors in both water vapor content and ground emissivity, the algorithm had an accuracy of ~1.4 K for LST retrieval. Validation of the IMW algorithm using the simulated datasets for various situations indicated that the LST difference between the retrieved and the simulated ones was 0.67 K on average, with an RMSE of 0.43 K. Comparison of our IMW algorithm with the single-channel (SC algorithm for three main atmosphere profiles indicated that the average error and RMSE of the IMW algorithm were −0.05 K and 0.84 K, respectively, which were less than the −2.86 K and 1.05 K of the SC algorithm. Application of the IMW algorithm to Nanjing and its vicinity in east China resulted in a reasonable LST estimation for the region. Spatial

  20. Epigenetic Stability of Cryopreserved and Cold-Stored Hops (United States)

    Three hop accessions representative of commercially cultivated hops were selected for the analysis of epigenetic stability; females of different origins, including a cultivar developed in New Zealand (Calicross) from American cultivars, a landrace derived European cultivar (Tardif de Bourgogne), and...

  1. Neural control of leg stiffness during hopping in boys and men. (United States)

    Oliver, J L; Smith, P M


    The purpose of the study was to investigate whether boys and men utilise different control strategies whilst hopping. Eleven boys (11-12yr old) and ten men completed hopping at 1.5Hz, 3.0Hz and at their preferred frequency. A footswitch measured contact and flight times, from which leg stiffness was calculated. Simultaneously, surface electromyograms (EMGs) of selected lower limb muscles were recorded and quantified for each 30ms period during the first 120ms post-ground contact. At 1.5Hz there were no differences between the groups in relative stiffness or muscle activity. At 3.0Hz men had significantly shorter contact times (P=0.013), longer flight times (P=0.002), greater relative stiffness (P=0.01) and significantly greater soleus (P=0.012) and vastus lateralis (Pboys (P=0.007), with greater leg stiffness (PBoys and men demonstrated similar control strategies when hopping at a slow frequency, but when hopping frequency increased men were able to better increase feedforward and reflex muscle activity to hop with greater relative stiffness. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  2. Localization of accessory pathway in patients with wolff-parkinson-white syndrome from surface ecg using arruda algorithm

    International Nuclear Information System (INIS)

    Saidullah, S.; Shah, B.


    Background: To ablate accessory pathway successfully and conveniently, accurate localization of the pathway is needed. Electrophysiologists use different algorithms before taking the patients to the electrophysiology (EP) laboratory to plan the intervention accordingly. In this study, we used Arruda algorithm to locate the accessory pathway. The objective of the study was to determine the accuracy of the Arruda algorithm for locating the pathway on surface ECG. Methods: It was a cross-sectional observational study conducted from January 2014 to January 2016 in the electrophysiology department of Hayat Abad Medical Complex Peshawar Pakistan. A total of fifty nine (n=59) consecutive patients of both genders between age 14-60 years presented with WPW syndrome (Symptomatic tachycardia with delta wave on surface ECG) were included in the study. Patient's electrocardiogram (ECG) before taking patients to laboratory was analysed on Arruda algorithm. Standard four wires protocol was used for EP study before ablation. Once the findings were confirmed the pathway was ablated as per standard guidelines. Results: A total of fifty nine (n=59) patients between the age 14-60 years were included in the study. Cumulative mean age was 31.5 years ± 12.5 SD. There were 56.4% (n=31) males with mean age 28.2 years ± 10.2 SD and 43.6% (n=24) were females with mean age 35.9 years ± 14.0 SD. Arruda algorithm was found to be accurate in predicting the exact accessory pathway (AP) in 83.6% (n=46) cases. Among all inaccurate predictions (n=9), Arruda inaccurately predicted two third (n=6; 66.7%) pathways towards right side (right posteroseptal, right posterolateral and right antrolateral). Conclusion: Arruda algorithm was found highly accurate in predicting accessory pathway before ablation. (author)

  3. Hip-Hopping across China: Intercultural Formulations of Local Identities (United States)

    Barrett, Catrice


    The linguistic dimensions of globalized hip-hop cannot be understood simply as a byproduct of English as an American export. As hip-hop mobilizes, it is common (and arguably necessary) for global hip-hop communities to struggle through purposeful, semiotically rooted dialectics over what constitutes "authentic" and respectable forms of…

  4. Revolutionizing Environmental Education through Indigenous Hip Hop Culture (United States)

    Gorlewski, Julie; Porfilio, Brad J.


    Based upon the life histories of six Indigenous hip hop artists of the Beat Nation artist collective, this essay captures how Indigenous hip hop has the potential to revolutionize environmental education. Hip hop provides Indigenous youth an emancipatory space to raise their opposition to neocolonial controls of Indigenous territories that…

  5. Bounds on the hop domination number of a tree

    Indian Academy of Sciences (India)

    A hop dominating set of a graph is a set of vertices of if for every vertex of () \\ D, there exists u ∈ D such that (, ) = 2. The hop domination number of a graph , denoted by ℎ(), is the minimum cardinality of a hop dominating set of . We prove that for every tree of order with leaves and support ...

  6. HPLC Analysis of [Alpha]- and [Beta]-Acids in Hops (United States)

    Danenhower, Travis M.; Force, Leyna J.; Petersen, Kenneth J.; Betts, Thomas A.; Baker, Gary A.


    Hops have been used for centuries to impart aroma and bitterness to beer. The cones of the female hop plant contain both essential oils, which include many of the fragrant components of hops, and a collection of compounds known as [alpha]- and [beta]-acids that are the precursors to bittering agents. In order for brewers to predict the ultimate…

  7. Performance analysis of multi-hop wireless packet networks

    Directory of Open Access Journals (Sweden)

    Lim J.-T.


    Full Text Available In this paper, a unified analytical framework for performance analysis of multi-hop wireless packet networks is developed. The effect of coupling between the hops on the degradation of the delay-throughput characteristics and the probability of blocking is investigated. The issue of hop decoupling is addressed.

  8. [Quantitative analysis of thiram by surface-enhanced raman spectroscopy combined with feature extraction Algorithms]. (United States)

    Zhang, Bao-hua; Jiang, Yong-cheng; Sha, Wen; Zhang, Xian-yi; Cui, Zhi-feng


    Three feature extraction algorithms, such as the principal component analysis (PCA), the discrete cosine transform (DCT) and the non-negative factorization (NMF), were used to extract the main information of the spectral data in order to weaken the influence of the spectral fluctuation on the subsequent quantitative analysis results based on the SERS spectra of the pesticide thiram. Then the extracted components were respectively combined with the linear regression algorithm--the partial least square regression (PLSR) and the non-linear regression algorithm--the support vector machine regression (SVR) to develop the quantitative analysis models. Finally, the effect of the different feature extraction algorithms on the different kinds of the regression algorithms was evaluated by using 5-fold cross-validation method. The experiments demonstrate that the analysis results of SVR are better than PLSR for the non-linear relationship between the intensity of the SERS spectrum and the concentration of the analyte. Further, the feature extraction algorithms can significantly improve the analysis results regardless of the regression algorithms which mainly due to extracting the main information of the source spectral data and eliminating the fluctuation. Additionally, PCA performs best on the linear regression model and NMF is best on the non-linear model, and the predictive error can be reduced nearly three times in the best case. The root mean square error of cross-validation of the best regression model (NMF+SVR) is 0.0455 micormol x L(-1) (10(-6) mol x L(-1)), and it attains the national detection limit of thiram, so the method in this study provides a novel method for the fast detection of thiram. In conclusion, the study provides the experimental references the selecting the feature extraction algorithms on the analysis of the SERS spectrum, and some common findings of feature extraction can also help processing of other kinds of spectroscopy.

  9. Algorithm for Recovery of Integrated Water Vapor Content in the Atmosphere over Land Surfaces Based on Satellite Spectroradiometer Data (United States)

    Lisenko, S. A.


    An algorithm is proposed for making charts of the distribution of water vapor in the atmosphere based on multispectral images of the earth by the Ocean and Land Color Instrument (OLCI) on board of the European research satellite Sentinel-3. The algorithm is based on multiple regression fits of the spectral brightness coefficients at the upper boundary of the atmosphere, the geometric parameters of the satellite location (solar and viewing angles), and the total water vapor content in the atmosphere. A regression equation is derived from experimental data on the variation in the optical characteristics of the atmosphere and underlying surface, together with Monte-Carlo calculations of the radiative transfer characteristics. The equation includes the brightness coefficients in the near IR channels of the OLCI for the absorption bands of water vapor and oxygen, as well as for the transparency windows of the atmosphere. Together these make it possible to eliminate the effect of the reflection spectrum of the underlying surface and air pressure on the accuracy of the measurements. The algorithm is tested using data from a prototype OLCI, the medium resolution imaging spectrometer (MERIS). A sample chart of the distribution of water vapor in the atmosphere over Eastern Europe is constructed without using subsatellite data and digital models of the surface relief. The water vapor contents in the atmosphere determined using MERIS images and data provided by earthbound measurements with the aerosol robotic network (AERONET) are compared with a mean square deviation of 1.24 kg/m2.

  10. The Rap on Hip-Hop (United States)

    Piekarski, Bill


    From its humble origins some 30 years ago in New York's bombed-out, poverty-ravaged South Bronx, hip-hop has risen to become a dominant cultural force both here and abroad. Strictly defined, the term refers to the entire cultural constellation that accompanies rap music, which in 2001 surpassed country music as the most popular musical genre in…

  11. Uudised : Ooper. Hip-hop. Madonna

    Index Scriptorium Estoniae


    Rumeenia sopran Nelly Miricioiu Vincenzo Bellini ooperi "Norma" nimiosas Nederlandse Operas Amsaterdamis 7.-28. märtsini. 4. märtsil Tallinna klubis Hollywood üritusel "Hip-Hop Café" New Yorgi duo Camp Lo. Ameerika poplaulja Madonna võttis vastu filmirolli

  12. Injury incidence in hip hop dance. (United States)

    Ojofeitimi, S; Bronner, S; Woo, H


    Hip hop dance has rapidly become a popular international art form. There is limited information on injury patterns in this population. The purpose of this study was to determine injury incidence and patterns among three groups of hip hop dancers. Three hundred and twelve intermediate, advanced, and expert hip hop dancers were recruited at battles, dance conferences, clubs, and on dance related web sites within the United States and internationally. A Web-based survey was conducted over a 6-month period. Inclusion criteria included intermediate and advanced level dancers over the age of 13. Dancers were divided into three main categories: Breakers, Popper/Lockers, and New Schoolers. Separate analysis of variances were used to compare injury pattern differences between groups. Two hundred and thirty-two dancers reported a total of 738 injuries. Five hundred and six of these (sustained by 205 dancers) were time-loss (TL) injuries. Annual injury incidence was 237% (162% involving TL). Lower extremity injuries were 52% and upper extremity injuries 32% of total injuries. Breakers had a higher injury incidence compared with Popper/Lockers, and New Schoolers. Hip hop dancers report injury rates that are higher than other dance forms but similar to gymnastics. These dancers should be educated concerning injury prevention, biomechanics, and use of protective equipment. © 2010 John Wiley & Sons A/S.

  13. The Philippine "Hip Hop Stick Dance" (United States)

    Lewis, Lisa


    This article introduces a dance that blends the traditional cultural heritage of the Philippines with modern music and moves. "Hip Hop Stick Dance" incorporates Tinikling (the Philippine national dance) and Arnis (a Filipino style of martial arts) to create a contemporary combination of rhythm, dance, and fitness. It was designed to introduce…

  14. Featherless Dinosaurs and the Hip-Hop Simulacrum: Reconsidering Hip-Hop's Appropriateness for the Music Classroom (United States)

    Kruse, Adam J.


    This article offers considerations for music teachers interested in including hip-hop music in their classrooms but who might feel concerned with or overwhelmed by issues of appropriateness. Two concerns related to hip-hop music are examined: language and negative social themes. Commercial interests in hip-hop music have created a simulacrum (or…

  15. The Formation of "Hip-Hop Academicus"--How American Scholars Talk about the Academisation of Hip-Hop (United States)

    Soderman, Johan


    Social activism and education have been associated with hip-hop since it emerged in New York City 38 years ago. Therefore, it might not be surprising that universities have become interested in hip-hop. This article aims to highlight this "hip-hop academisation" and analyse the discursive mechanisms that manifest in these academisation…

  16. Inhibition of human cytochrome P450 enzymes by hops (Humulus lupulus) and hop prenylphenols. (United States)

    Yuan, Yang; Qiu, Xi; Nikolić, Dejan; Chen, Shao-Nong; Huang, Ke; Li, Guannan; Pauli, Guido F; van Breemen, Richard B


    As hops (Humulus lupulus L.) are used in the brewing of beer and by menopausal women as estrogenic dietary supplements, the potential for hop extracts and hop constituents to cause drug-botanical interactions by inhibiting human cytochrome P450 enzymes was investigated. Inhibition of major human cytochrome P450 enzymes by a standardized hop extract and isolated hop prenylated phenols was evaluated using a fast and efficient assay based on ultrahigh pressure liquid chromatography-tandem mass spectrometry. The hop extract at 5 μg/mL inhibited CYP2C8 (93%), CYP2C9 (88%), CYP2C19 (70%), and CYP1A2 (27%) with IC50 values of 0.8, 0.9, 3.3, and 9.4 μg/mL, respectively, but time-dependent inactivation was observed only for CYP1A2. Isoxanthohumol from hops was the most potent inhibitor of CYP2C8 with an IC50 of 0.2 μM, whereas 8-prenylnaringenin was the most potent inhibitor of CYP1A2, CYP2C9 and CYP2C19 with IC50 values of 1.1 μM, 1.1 μM and 0.4 μM, respectively. Extracts of hops contain prenylated compounds such as the flavanones isoxanthohumol and 8-prenylnaringenin and the chalcone xanthohumol that can inhibit CYP450s, especially the CYP2C family, which may affect the efficacy and safety of some CYP2C substrate drugs when co-administered. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Generation of synthetic surface electromyography signals under fatigue conditions for varying force inputs using feedback control algorithm. (United States)

    Venugopal, G; Deepak, P; Ghosh, Diptasree M; Ramakrishnan, S


    Surface electromyography is a non-invasive technique used for recording the electrical activity of neuromuscular systems. These signals are random, complex and multi-component. There are several techniques to extract information about the force exerted by muscles during any activity. This work attempts to generate surface electromyography signals for various magnitudes of force under isometric non-fatigue and fatigue conditions using a feedback model. The model is based on existing current distribution, volume conductor relations, the feedback control algorithm for rate coding and generation of firing pattern. The result shows that synthetic surface electromyography signals are highly complex in both non-fatigue and fatigue conditions. Furthermore, surface electromyography signals have higher amplitude and lower frequency under fatigue condition. This model can be used to study the influence of various signal parameters under fatigue and non-fatigue conditions.

  18. Dynamic Task Allocation in Multi-Hop Multimedia Wireless Sensor Networks with Low Mobility

    Directory of Open Access Journals (Sweden)

    Klaus Moessner


    Full Text Available This paper presents a task allocation-oriented framework to enable efficient in-network processing and cost-effective multi-hop resource sharing for dynamic multi-hop multimedia wireless sensor networks with low node mobility, e.g., pedestrian speeds. The proposed system incorporates a fast task reallocation algorithm to quickly recover from possible network service disruptions, such as node or link failures. An evolutional self-learning mechanism based on a genetic algorithm continuously adapts the system parameters in order to meet the desired application delay requirements, while also achieving a sufficiently long network lifetime. Since the algorithm runtime incurs considerable time delay while updating task assignments, we introduce an adaptive window size to limit the delay periods and ensure an up-to-date solution based on node mobility patterns and device processing capabilities. To the best of our knowledge, this is the first study that yields multi-objective task allocation in a mobile multi-hop wireless environment under dynamic conditions. Simulations are performed in various settings, and the results show considerable performance improvement in extending network lifetime compared to heuristic mechanisms. Furthermore, the proposed framework provides noticeable reduction in the frequency of missing application deadlines.

  19. The Bitter Chemodiversity of Hops (Humulus lupulus L.). (United States)

    Dresel, Michael; Vogt, Christian; Dunkel, Andreas; Hofmann, Thomas


    To map the chemodiversity of key bitter compounds in hops, a total of 75 different samples collected from the global hop market were analyzed for 117 key bitter tastants by means of a multiparametric HPLC-MS/MSMRM method. Among the compounds detected, 2'',3''-epoxyxanthohumol was detected for the first time in hops and iso¬xantho¬humol M was identified as a marker compound for varieties grown in Germany. Hop ageing experiments in the absence and presence of air oxygen, respectively, were conducted to address the stability of hop-derived compounds during long-term storage.

  20. Surface quality monitoring for process control by on-line vibration analysis using an adaptive spline wavelet algorithm (United States)

    Luo, G. Y.; Osypiw, D.; Irle, M.


    The dynamic behaviour of wood machining processes affects the surface finish quality of machined workpieces. In order to meet the requirements of increased production efficiency and improved product quality, surface quality information is needed for enhanced process control. However, current methods using high price devices or sophisticated designs, may not be suitable for industrial real-time application. This paper presents a novel approach of surface quality evaluation by on-line vibration analysis using an adaptive spline wavelet algorithm, which is based on the excellent time-frequency localization of B-spline wavelets. A series of experiments have been performed to extract the feature, which is the correlation between the relevant frequency band(s) of vibration with the change of the amplitude and the surface quality. The graphs of the experimental results demonstrate that the change of the amplitude in the selective frequency bands with variable resolution (linear and non-linear) reflects the quality of surface finish, and the root sum square of wavelet power spectrum is a good indication of surface quality. Thus, surface quality can be estimated and quantified at an average level in real time. The results can be used to regulate and optimize the machine's feed speed, maintaining a constant spindle motor speed during cutting. This will lead to higher level control and machining rates while keeping dimensional integrity and surface finish within specification.

  1. Pattern recognition of concrete surface cracks and defects using integrated image processing algorithms (United States)

    Balbin, Jessie R.; Hortinela, Carlos C.; Garcia, Ramon G.; Baylon, Sunnycille; Ignacio, Alexander Joshua; Rivera, Marco Antonio; Sebastian, Jaimie


    Pattern recognition of concrete surface crack defects is very important in determining stability of structure like building, roads or bridges. Surface crack is one of the subjects in inspection, diagnosis, and maintenance as well as life prediction for the safety of the structures. Traditionally determining defects and cracks on concrete surfaces are done manually by inspection. Moreover, any internal defects on the concrete would require destructive testing for detection. The researchers created an automated surface crack detection for concrete using image processing techniques including Hough transform, LoG weighted, Dilation, Grayscale, Canny Edge Detection and Haar Wavelet Transform. An automatic surface crack detection robot is designed to capture the concrete surface by sectoring method. Surface crack classification was done with the use of Haar trained cascade object detector that uses both positive samples and negative samples which proved that it is possible to effectively identify the surface crack defects.

  2. Maritime over the Horizon Sensor Integration: High Frequency Surface-Wave-Radar and Automatic Identification System Data Integration Algorithm. (United States)

    Nikolic, Dejan; Stojkovic, Nikola; Lekic, Nikola


    To obtain the complete operational picture of the maritime situation in the Exclusive Economic Zone (EEZ) which lies over the horizon (OTH) requires the integration of data obtained from various sensors. These sensors include: high frequency surface-wave-radar (HFSWR), satellite automatic identification system (SAIS) and land automatic identification system (LAIS). The algorithm proposed in this paper utilizes radar tracks obtained from the network of HFSWRs, which are already processed by a multi-target tracking algorithm and associates SAIS and LAIS data to the corresponding radar tracks, thus forming an integrated data pair. During the integration process, all HFSWR targets in the vicinity of AIS data are evaluated and the one which has the highest matching factor is used for data association. On the other hand, if there is multiple AIS data in the vicinity of a single HFSWR track, the algorithm still makes only one data pair which consists of AIS and HFSWR data with the highest mutual matching factor. During the design and testing, special attention is given to the latency of AIS data, which could be very high in the EEZs of developing countries. The algorithm is designed, implemented and tested in a real working environment. The testing environment is located in the Gulf of Guinea and includes a network of HFSWRs consisting of two HFSWRs, several coastal sites with LAIS receivers and SAIS data provided by provider of SAIS data.

  3. A diagnostic assessment of evolutionary algorithms for multi-objective surface water reservoir control (United States)

    Zatarain Salazar, Jazmin; Reed, Patrick M.; Herman, Jonathan D.; Giuliani, Matteo; Castelletti, Andrea


    Globally, the pressures of expanding populations, climate change, and increased energy demands are motivating significant investments in re-operationalizing existing reservoirs or designing operating policies for new ones. These challenges require an understanding of the tradeoffs that emerge across the complex suite of multi-sector demands in river basin systems. This study benchmarks our current capabilities to use Evolutionary Multi-Objective Direct Policy Search (EMODPS), a decision analytic framework in which reservoirs' candidate operating policies are represented using parameterized global approximators (e.g., radial basis functions) then those parameterized functions are optimized using multi-objective evolutionary algorithms to discover the Pareto approximate operating policies. We contribute a comprehensive diagnostic assessment of modern MOEAs' abilities to support EMODPS using the Conowingo reservoir in the Lower Susquehanna River Basin, Pennsylvania, USA. Our diagnostic results highlight that EMODPS can be very challenging for some modern MOEAs and that epsilon dominance, time-continuation, and auto-adaptive search are helpful for attaining high levels of performance. The ɛ-MOEA, the auto-adaptive Borg MOEA, and ɛ-NSGAII all yielded superior results for the six-objective Lower Susquehanna benchmarking test case. The top algorithms show low sensitivity to different MOEA parameterization choices and high algorithmic reliability in attaining consistent results for different random MOEA trials. Overall, EMODPS poses a promising method for discovering key reservoir management tradeoffs; however algorithmic choice remains a key concern for problems of increasing complexity.

  4. Multi-hop amplify-and-forward relaying cooperation in the presence of I/Q imbalance

    KAUST Repository

    Qi, Jian


    In this paper, multi-hop cooperative networks implementing channel state information (CSI)-assisted amplify-and-forward (AF) relaying in the presence of in-phase and quadrature-phase (I/Q) imbalance are investigated. We propose a compensation algorithm for the I/Q imbalance. The performance of the multi-hop CSI-assisted AF cooperative networks with and without compensation for I/Q imbalance in Nakagami-m fading environment is evaluated in terms of average symbol error probability. Numerical results are provided and show that the proposed compensation method can effectively mitigate the impact of I/Q imbalance. © 2013 IEEE.

  5. Extending the inverse scattering series free-surface-multiple-elimination algorithm by accommodating the source property on data with interfering or proximal seismic events (United States)

    Zhao, Lei; Yang, Jinlong; Weglein, Arthur B.


    The inverse scattering series free-surface-multiple-elimination (FSME) algorithm is modified and extended to accommodate the source property-source radiation pattern. That accommodation can provide additional value for the fidelity of the free-surface multiple predictions. The new extended FSME algorithm retains all the merits of the original algorithm, i.e., fully data-driven and with a requirement of no subsurface information. It is tested on a one-dimensional acoustic model with proximal and interfering seismic events, such as interfering primaries and multiples. The results indicate the new extended FSME algorithm can predict more accurate free-surface multiples than methods without the accommodation of the source property if the source has a radiation pattern. This increased effectiveness in prediction contributes to removing free-surface multiples without damaging primaries. It is important in such cases to increase predictive effectiveness because other prediction methods, such as the surface-related-multiple-elimination algorithm, has difficulties and problems in prediction accuracy, and those issues affect efforts to remove multiples through adaptive subtraction. Therefore accommodation of the source property can not only improve the effectiveness of the FSME algorithm, but also extend the method beyond the current algorithm (e.g. improving the internal multiple attenuation algorithm).

  6. Real-Time On-Board Airborne Demonstration of High-Speed On-Board Data Processing for Science Instruments (HOPS) (United States)

    Beyon, Jeffrey Y.; Ng, Tak-Kwong; Davis, Mitchell J.; Adams, James K.; Bowen, Stephen C.; Fay, James J.; Hutchinson, Mark A.


    The project called High-Speed On-Board Data Processing for Science Instruments (HOPS) has been funded by NASA Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST) program since April, 2012. The HOPS team recently completed two flight campaigns during the summer of 2014 on two different aircrafts with two different science instruments. The first flight campaign was in July, 2014 based at NASA Langley Research Center (LaRC) in Hampton, VA on the NASA's HU-25 aircraft. The science instrument that flew with HOPS was Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) CarbonHawk Experiment Simulator (ACES) funded by NASA's Instrument Incubator Program (IIP). The second campaign was in August, 2014 based at NASA Armstrong Flight Research Center (AFRC) in Palmdale, CA on the NASA's DC-8 aircraft. HOPS flew with the Multifunctional Fiber Laser Lidar (MFLL) instrument developed by Excelis Inc. The goal of the campaigns was to perform an end-to-end demonstration of the capabilities of the HOPS prototype system (HOPS COTS) while running the most computationally intensive part of the ASCENDS algorithm real-time on-board. The comparison of the two flight campaigns and the results of the functionality tests of the HOPS COTS are presented in this paper.

  7. Charge transport in organic semiconductors: assessment of the mean field theory in the hopping regime. (United States)

    Wang, Linjun; Beljonne, David


    The performance of the mean field theory to account for charge transfer rate in molecular dimers and charge transport mobility in molecular stacks with small intermolecular electronic coupling and large local electron-phonon coupling (i.e., in the hopping regime) is carefully investigated against various other approaches. Using Marcus formula as a reference, it is found that mean field theory with system-bath interaction and surface hopping approaches yield fully consistent charge transfer rates in dimers. However, in contrast to the dimer case, incorporating system-bath interaction in the mean field approach results in a completely wrong temperature dependence of charge carrier mobility in larger aggregates. Although the mean field simulation starting from the relaxed geometry of a charged molecule and neglecting system-bath interaction can reproduce thermally activated transport, it is not able to characterize properly the role of additional nonlocal electron-phonon couplings. Our study reveals that the mean field theory must be used with caution when studying charge transport in the hopping regime of organic semiconductors, where the surface hopping approach is generally superior.

  8. A Torque Error Compensation Algorithm for Surface Mounted Permanent Magnet Synchronous Machines with Respect to Magnet Temperature Variations

    Directory of Open Access Journals (Sweden)

    Chang-Seok Park


    Full Text Available This paper presents a torque error compensation algorithm for a surface mounted permanent magnet synchronous machine (SPMSM through real time permanent magnet (PM flux linkage estimation at various temperature conditions from medium to rated speed. As known, the PM flux linkage in SPMSMs varies with the thermal conditions. Since a maximum torque per ampere look up table, a control method used for copper loss minimization, is developed based on estimated PM flux linkage, variation of PM flux linkage results in undesired torque development of SPMSM drives. In this paper, PM flux linkage is estimated through a stator flux linkage observer and the torque error is compensated in real time using the estimated PM flux linkage. In this paper, the proposed torque error compensation algorithm is verified in simulation and experiment.

  9. Exploiting Multi-user Diversity and Multi-hop Diversity in Dual-hop Broadcast Channels

    KAUST Repository

    Zafar, Ammar


    We propose joint user-and-hop scheduling over dual-hop block-fading broadcast channels in order to exploit multi-user diversity gains and multi-hop diversity gains all together. To achieve this objective, the first and second hops are scheduled opportunistically based on the channel state information. The joint scheduling problem is formulated as maximizing the weighted sum of the long term achievable rates of the users under a stability constraint, which means that in the long term the rate received by the relay should equal the rate transmitted by it, in addition to power constraints. We show that this problem is equivalent to a single-hop broadcast channel by treating the source as a virtual user with an optimal weight that maintains the stability constraint. We show how to obtain the source weight either off-line based on channel statistics or on real-time based on channel measurements. Furthermore, we consider special cases including the maximum sum-rate scheduler and the proportional fair scheduler. We also show how to extend the scheme into one that allows multiple user scheduling via superposition coding with successive decoding. Numerical results demonstrate that our proposed joint scheduling scheme enlarges the rate region as compared to scheduling schemes that exploit the diversity gains partially.

  10. Uudised : Pop-karneval. Hip-hop

    Index Scriptorium Estoniae


    Muusika- ja kunstikarnevalist "Beta Bubble" 1. apr. Tallinnas Von Krahlis. Pärnu taasühinenud hip-hop-bänd Noizmakaz (TommyBoy ja Alko) sõlmis lepingu plaadifirmaga Mindnote ja annab selle alt apr. keskel välja oma teise albumi "Valitud mõtted".1. apr. tuleb müügile Noizmakazi singel "Miski muu ei loe", debüüt "Social Poetry" ilmus aastal 2001

  11. Small polaron hopping in magnetic semiconductors

    International Nuclear Information System (INIS)

    Emin, D.; Liu, N.L.H.


    In a number of magnetic insulators it has been hypothesized that the charge carriers form small polarons. The transfer of an electron between magnetic sites and how the magnetic nature of the material affects the rate which characterizes small-polaron hops between magnetic sites were studied. The basic transfer processes are addressed from a many-electron point in which the itinerant electron is treated as indistinguishable from those which contribute unpaired spins at the magnetic sites

  12. Fuzzy surfaces in GIS and geographical analysis theory, analytical methods, algorithms and applications

    CERN Document Server

    Lodwick, Weldon


    Surfaces are a central to geographical analysis. Their generation and manipulation are a key component of geographical information systems (GISs). However, geographical surface data is often not precise. When surfaces are used to model geographical entities, the data inherently contains uncertainty in terms of both position and attribute. Fuzzy Surface in GIS and Geographical Analysis sets out a process to identify the uncertainty in geographic entities. It describes how to successfully obtain, model, analyze, and display data, as well as interpret results within the context of GIS. Focusing on uncertainty that arises from transitional boundaries, the book limits its study to three types of uncertainties: intervals, fuzzy sets, and possibility distributions. The book explains that uncertainty in geographical data typically stems from these three and it is only natural to incorporate them into the analysis and display of surface data. The book defines the mathematics associated with each method for analysis,...

  13. All-Weather Sounding of Moisture and Temperature From Microwave Sensors Using a Coupled Surface/Atmosphere Inversion Algorithm (United States)

    Boukabara, S. A.; Garrett, K.


    A one-dimensional variational retrieval system has been developed, capable of producing temperature and water vapor profiles in clear, cloudy and precipitating conditions. The algorithm, known as the Microwave Integrated Retrieval System (MiRS), is currently running operationally at the National Oceanic and Atmospheric Administration (NOAA) National Environmental Satellite Data and Information Service (NESDIS), and is applied to a variety of data from the AMSU-A/MHS sensors on board the NOAA-18, NOAA-19, and MetOp-A/B polar satellite platforms, as well as SSMI/S on board both DMSP F-16 and F18, and from the NPP ATMS sensor. MiRS inverts microwave brightness temperatures into atmospheric temperature and water vapor profiles, along with hydrometeors and surface parameters, simultaneously. This atmosphere/surface coupled inversion allows for more accurate retrievals in the lower tropospheric layers by accounting for the surface emissivity impact on the measurements. It also allows the inversion of the soundings in all-weather conditions thanks to the incorporation of the hydrometeors parameters in the inverted state vector as well as to the inclusion of the emissivity in the same state vector, which is accounted for dynamically for the highly variable surface conditions found under precipitating atmospheres. The inversion is constrained in precipitating conditions by the inclusion of covariances for hydrometeors, to take advantage of the natural correlations that exist between temperature and water vapor with liquid and ice cloud along with rain water. In this study, we present a full assessment of temperature and water vapor retrieval performances in all-weather conditions and over all surface types (ocean, sea-ice, land, and snow) using matchups with radiosonde as well as Numerical Weather Prediction and other satellite retrieval algorithms as references. An emphasis is placed on retrievals in cloudy and precipitating atmospheres, including extreme weather events

  14. Technical assessment of forest road network using Backmund and surface distribution algorithm in a hardwood forest of Hyrcanian zone

    Energy Technology Data Exchange (ETDEWEB)

    Parsakhoo, P.


    Aim of study: Corrected Backmund and Surface Distribution Algorithms (SDA) for analysis of forest road network are introduced and presented in this study. Research was carried out to compare road network performance between two districts in a hardwood forest. Area of study: Shast Kalateh forests, Iran. Materials and methods: In uncorrected Backmund algorithm, skidding distance was determined by calculating road density and spacing and then it was designed as Potential Area for Skidding Operations (PASO) in ArcGIS software. To correct this procedure, the skidding constraint areas were taken using GPS and then removed from PASO. In SDA, shortest perpendicular distance from geometrical center of timber compartments to road was measured at both districts. Main results: In corrected Backmund, forest openness in district I and II were 70.3% and 69.5%, respectively. Therefore, there was little difference in forest openness in the districts based on the uncorrected Backmund. In SDA, the mean distance from geometrical center of timber compartments to the roads of districts I and II were 199.45 and 149.31 meters, respectively. Forest road network distribution in district II was better than that of district I relating to SDA. Research highlights: It was concluded that uncorrected Backmund was not precise enough to assess forest road network, while corrected Backmund could exhibit a real PASO by removing skidding constraints. According to presented algorithms, forest road network performance in district II was better than district I. (Author)

  15. Technical assessment of forest road network using Backmund and surface distribution algorithm in a hardwood forest of Hyrcanian zone

    Directory of Open Access Journals (Sweden)

    Aidin Parsakhoo


    Full Text Available Aim of study: Corrected Backmund and Surface Distribution Algorithms (SDA for analysis of forest road network are introduced and presented in this study. Research was carried out to compare road network performance between two districts in a hardwood forest. Area of study: Shast Kalateh forests, Iran. Materials and methods: In uncorrected Backmund algorithm, skidding distance was determined by calculating road density and spacing and then it was designed as Potential Area for Skidding Operations (PASO in ArcGIS software. To correct this procedure, the skidding constraint areas were taken using GPS and then removed from PASO. In SDA, shortest perpendicular distance from geometrical center of timber compartments to road was measured at both districts. Main results: In corrected Backmund, forest openness in district I and II were 70.3% and 69.5%, respectively. Therefore, there was little difference in forest openness in the districts based on the uncorrected Backmund. In SDA, the mean distance from geometrical center of timber compartments to the roads of districts I and II were 199.45 and 149.31 meters, respectively. Forest road network distribution in district II was better than that of district I relating to SDA. Research highlights: It was concluded that uncorrected Backmund was not precise enough to assess forest road network, while corrected Backmund could exhibit a real PASO by removing skidding constraints. According to presented algorithms, forest road network performance in district II was better than district I.

  16. An algorithm to locate optimal bond breaking points on a potential energy surface for applications in mechanochemistry and catalysis (United States)

    Bofill, Josep Maria; Ribas-Ariño, Jordi; García, Sergio Pablo; Quapp, Wolfgang


    The reaction path of a mechanically induced chemical transformation changes under stress. It is well established that the force-induced structural changes of minima and saddle points, i.e., the movement of the stationary points on the original or stress-free potential energy surface, can be described by a Newton Trajectory (NT). Given a reactive molecular system, a well-fitted pulling direction, and a sufficiently large value of the force, the minimum configuration of the reactant and the saddle point configuration of a transition state collapse at a point on the corresponding NT trajectory. This point is called barrier breakdown point or bond breaking point (BBP). The Hessian matrix at the BBP has a zero eigenvector which coincides with the gradient. It indicates which force (both in magnitude and direction) should be applied to the system to induce the reaction in a barrierless process. Within the manifold of BBPs, there exist optimal BBPs which indicate what is the optimal pulling direction and what is the minimal magnitude of the force to be applied for a given mechanochemical transformation. Since these special points are very important in the context of mechanochemistry and catalysis, it is crucial to develop efficient algorithms for their location. Here, we propose a Gauss-Newton algorithm that is based on the minimization of a positively defined function (the so-called σ -function). The behavior and efficiency of the new algorithm are shown for 2D test functions and for a real chemical example.

  17. Information guided channel hopping with an arbitrary number of transmit antennas

    KAUST Repository

    Yang, Yuli


    In order to realize the information guided channel hopping, also known as spatial modulation, with more design flexibility, in this paper we propose a novel scheme that allows operation with an arbitrary number of transmit antennas. Once the number of transmit antennas is not a power of two, the antennas\\' symbols are mapped by different numbers of bits. Subsequently, constellations with different orders are exploited for the modulation of radiated symbols so as to guarantee that the total number of bits transmitted at each time slot remains the same. Furthermore, we introduce a decoding algorithm with low complexity for this design. Numerical results on bit error rate performance are provided and substantiate that the proposed scheme turns out to be a promising alternative to the design of information guided channel hopping. © 2012 IEEE.

  18. A Low-Cost Time-Hopping Impulse Radio System for High Data Rate Transmission

    Directory of Open Access Journals (Sweden)

    Jinyun Zhang


    Full Text Available We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are (i all-baseband implementation that obviates the need for passband components, (ii symbol-rate (not chip rate sampling, A/D conversion, and digital signal processing, (iii fast acquisition due to novel search algorithms, and (iv spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110 Mbps at 7–10 m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.

  19. An Improved Response Surface Methodology Algorithm with an Application to Traffic Signal Optimization for Urban Networks (United States)


    Prepared ca. 1995. This paper illustrates the use of the simulation-optimization technique of response surface methodology (RSM) in traffic signal optimization of urban networks. It also quantifies the gains of using the common random number (CRN) va...

  20. Land Surface Temperature and Emissivity Separation from Cross-Track Infrared Sounder Data with Atmospheric Reanalysis Data and ISSTES Algorithm

    Directory of Open Access Journals (Sweden)

    Yu-Ze Zhang


    Full Text Available The Cross-track Infrared Sounder (CrIS is one of the most advanced hyperspectral instruments and has been used for various atmospheric applications such as atmospheric retrievals and weather forecast modeling. However, because of the specific design purpose of CrIS, little attention has been paid to retrieving land surface parameters from CrIS data. To take full advantage of the rich spectral information in CrIS data to improve the land surface retrievals, particularly the acquisition of a continuous Land Surface Emissivity (LSE spectrum, this paper attempts to simultaneously retrieve a continuous LSE spectrum and the Land Surface Temperature (LST from CrIS data with the atmospheric reanalysis data and the Iterative Spectrally Smooth Temperature and Emissivity Separation (ISSTES algorithm. The results show that the accuracy of the retrieved LSEs and LST is comparable with the current land products. The overall differences of the LST and LSE retrievals are approximately 1.3 K and 1.48%, respectively. However, the LSEs in our study can be provided as a continuum spectrum instead of the single-channel values in traditional products. The retrieved LST and LSEs now can be better used to further analyze the surface properties or improve the retrieval of atmospheric parameters.

  1. Rethinking Pedagogy in Urban Spaces: Implementing Hip-Hop Pedagogy in the Urban Science Classroom (United States)

    Adjapong, Edmund S.; Emdin, Christopher


    A significant amount of research regarding Hip-Hop Based Education (HHBE) fails to provide insight on how to incorporate elements of Hip-Hop into daily teaching practices; rather Hip-Hop based educators focus mainly on incorporating Hip-Hop culture into curricula. This study explores the benefits of using two specific Hip-Hop pedagogical practices…

  2. Continuous measurements of water surface height and width along a 6.5km river reach for discharge algorithm development (United States)

    Tuozzolo, S.; Durand, M. T.; Pavelsky, T.; Pentecost, J.


    The upcoming Surface Water and Ocean Topography (SWOT) satellite will provide measurements of river width and water surface elevation and slope along continuous swaths of world rivers. Understanding water surface slope and width dynamics in river reaches is important for both developing and validating discharge algorithms to be used on future SWOT data. We collected water surface elevation and river width data along a 6.5km stretch of the Olentangy River in Columbus, Ohio from October to December 2014. Continuous measurements of water surface height were supplemented with periodical river width measurements at twenty sites along the study reach. The water surface slope of the entire reach ranged from during 41.58 cm/km at baseflow to 45.31 cm/km after a storm event. The study reach was also broken into sub-reaches roughly 1km in length to study smaller scale slope dynamics. The furthest upstream sub-reaches are characterized by free-flowing riffle-pool sequences, while the furthest downstream sub-reaches were directly affected by two low-head dams. In the sub-reaches immediately upstream of each dam, baseflow slope is as low as 2 cm/km, while the furthest upstream free-flowing sub-reach has a baseflow slope of 100 cm/km. During high flow events the backwater effect of the dams was observed to propagate upstream: sub-reaches impounded by the dams had increased water surface slopes, while free flowing sub-reaches had decreased water surface slopes. During the largest observed flow event, a stage change of 0.40 m affected sub-reach slopes by as much as 30 cm/km. Further analysis will examine height-width relationships within the study reach and relate cross-sectional flow area to river stage. These relationships can be used in conjunction with slope data to estimate discharge using a modified Manning's equation, and are a core component of discharge algorithms being developed for the SWOT mission.

  3. Assessment of Polarization Effect on Efficiency of Levenberg-Marquardt Algorithm in Case of Thin Atmosphere over Black Surface (United States)

    Korkin, S.; Lyapustin, A.


    The Levenberg-Marquardt algorithm [1, 2] provides a numerical iterative solution to the problem of minimization of a function over a space of its parameters. In our work, the Levenberg-Marquardt algorithm retrieves optical parameters of a thin (single scattering) plane parallel atmosphere irradiated by collimated infinitely wide monochromatic beam of light. Black ground surface is assumed. Computational accuracy, sensitivity to the initial guess and the presence of noise in the signal, and other properties of the algorithm are investigated in scalar (using intensity only) and vector (including polarization) modes. We consider an atmosphere that contains a mixture of coarse and fine fractions. Following [3], the fractions are simulated using Henyey-Greenstein model. Though not realistic, this assumption is very convenient for tests [4, p.354]. In our case it yields analytical evaluation of Jacobian matrix. Assuming the MISR geometry of observation [5] as an example, the average scattering cosines and the ratio of coarse and fine fractions, the atmosphere optical depth, and the single scattering albedo, are the five parameters to be determined numerically. In our implementation of the algorithm, the system of five linear equations is solved using the fast Cramer's rule [6]. A simple subroutine developed by the authors, makes the algorithm independent from external libraries. All Fortran 90/95 codes discussed in the presentation will be available immediately after the meeting from by request. [1]. Levenberg K, A method for the solution of certain non-linear problems in least squares, Quarterly of Applied Mathematics, 1944, V.2, P.164-168. [2]. Marquardt D, An algorithm for least-squares estimation of nonlinear parameters, Journal on Applied Mathematics, 1963, V.11, N.2, P.431-441. [3]. Hovenier JW, Multiple scattering of polarized light in planetary atmospheres. Astronomy and Astrophysics, 1971, V.13, P.7 - 29. [4]. Mishchenko MI, Travis LD

  4. The retrieval of aerosol over land surface from GF-1 16m camera with Deep Blue algorithm (United States)

    Zhu, Wende; Zheng, Taihao; Zhang, Luo; Wang, Lei; Cai, Kun


    As Chinese new satellite of high resolution for earth observation, the application of air pollution monitoring for GF-1 data is a key problem which need to be solved. In the paper, based on Hsu et al (2004) Deep Blue algorithm, by taking count of the characteristic of GF-1 16m camera, the contribution of land surface was removed by MODIS surface reflectance product, and aerosol optical depth (AOD) was retrieved from apparent reflectance in blue band. So, Deep Blue algorithm was applied to GF-1 16m camera successfully. Then, we collected GF-1 16m camera data over Beijing area between August and November, 2014, and the experiment of AOD was processed. It is obvious that the retrieved image showed the distribution of AOD well. At last, the AOD was validated by ground-based AOD data of AERONET/PHOTONS Beijing site. It is showed that there are good agreement between GF-1 AOD and AERONET/PHOTONS AOD, (R>0.7). But GF-1 AOD is obviously larger than ground-based AOD which may be brought by the difference of filter response function between MODIS and GF-1 camera.

  5. Predicting tooth surface loss using genetic algorithms-optimized artificial neural networks. (United States)

    Al Haidan, Ali; Abu-Hammad, Osama; Dar-Odeh, Najla


    Our aim was to predict tooth surface loss in individuals without the need to conduct clinical examinations. Artificial neural networks (ANNs) were used to construct a mathematical model. Input data consisted of age, smoker status, type of tooth brush, brushing, and consumption of pickled food, fizzy drinks, orange, apple, lemon, and dried seeds. Output data were the sum of tooth surface loss scores for selected teeth. The optimized constructed ANN consisted of 2-layer network with 15 neurons in the first layer and one neuron in the second layer. The data of 46 subjects were used to build the model, while the data of 15 subjects were used to test the model. Accepting an error of ±5 scores for all chosen teeth, the accuracy of the network becomes more than 80%. In conclusion, this study shows that modeling tooth surface loss using ANNs is possible and can be achieved with a high degree of accuracy.

  6. Predicting Tooth Surface Loss Using Genetic Algorithms-Optimized Artificial Neural Networks

    Directory of Open Access Journals (Sweden)

    Ali Al Haidan


    Full Text Available Our aim was to predict tooth surface loss in individuals without the need to conduct clinical examinations. Artificial neural networks (ANNs were used to construct a mathematical model. Input data consisted of age, smoker status, type of tooth brush, brushing, and consumption of pickled food, fizzy drinks, orange, apple, lemon, and dried seeds. Output data were the sum of tooth surface loss scores for selected teeth. The optimized constructed ANN consisted of 2-layer network with 15 neurons in the first layer and one neuron in the second layer. The data of 46 subjects were used to build the model, while the data of 15 subjects were used to test the model. Accepting an error of ±5 scores for all chosen teeth, the accuracy of the network becomes more than 80%. In conclusion, this study shows that modeling tooth surface loss using ANNs is possible and can be achieved with a high degree of accuracy.

  7. Resistance Values in Palestinian Hip-hop Music


    Alindah, Lutfiyah


    This research aims to describe popular culture of Palestine Hip-Hop and the values of songs. This research has purposes 1) to describe popular culture in Palestine Hip-Hop, and 2) to find resistance value in hip-hop songs. This research used popular culture approach of Adorno that analyzes three songs of DAM group, they are Who is the Terrorist?, Ghareeb fi Biladi, and Olive Trees. This research shows that 1) Hip-Hop music is the source of resistance Palestine through music media, 2) three of...

  8. Terrain dependant hop count selection for transparent relay transmissions

    Directory of Open Access Journals (Sweden)

    Cibile K. Kanjirathumkal


    Full Text Available In this Letter, the selection of the best hop count for a particular topography, in the context of enhanced connectivity using multi-hop transparent relay communication is addressed. Based on the coefficient of variation and the terrain specific fading severity factor of the distribution, it is possible to estimate the optimal hop count that can provide the required performance at detector. Two distribution models, which can adequately characterise the terrain fading effects on empirical data are considered for performance comparison. The results are useful in selecting branches, with low variability and optimal hop count for connectivity, in multi-stream switched diversity combining systems.

  9. Simulating Muscle-Reflex Dynamics in a Simple Hopping Robot (United States)

    Seyfarth, Andre; Kalveram, Karl Theodor; Geyer, Hartmut

    In legged systems, springy legs facilitate gaits with subsequent contact and flight phases. Here, we test whether electrical motors can generate leg behaviors suitable for stable hopping. We built a vertically operating sledge actuated by a motor-driven leg. The motor torque simulates either a linear leg spring or a muscle-reflex system. For stable hopping significant energy supply was required after midstance. This was achieved by enhancing leg stiffness or by continuously applying positive force feedback to the simulated muscle. The muscle properties combined with positive force feedback result in spring-like behavior which enables stable hopping with adjustable hopping height.

  10. An Algorithm for Surface Current Retrieval from X-band Marine Radar Images

    Directory of Open Access Journals (Sweden)

    Chengxi Shen


    Full Text Available In this paper, a novel current inversion algorithm from X-band marine radar images is proposed. The routine, for which deep water is assumed, begins with 3-D FFT of the radar image sequence, followed by the extraction of the dispersion shell from the 3-D image spectrum. Next, the dispersion shell is converted to a polar current shell (PCS using a polar coordinate transformation. After removing outliers along each radial direction of the PCS, a robust sinusoidal curve fitting is applied to the data points along each circumferential direction of the PCS. The angle corresponding to the maximum of the estimated sinusoid function is determined to be the current direction, and the amplitude of this sinusoidal function is the current speed. For validation, the algorithm is tested against both simulated radar images and field data collected by a vertically-polarized X-band system and ground-truthed with measurements from an acoustic Doppler current profiler (ADCP. From the field data, it is observed that when the current speed is less than 0.5 m/s, the root mean square differences between the radar-derived and the ADCP-measured current speed and direction are 7.3 cm/s and 32.7°, respectively. The results indicate that the proposed procedure, unlike most existing current inversion schemes, is not susceptible to high current speeds and circumvents the need to consider aliasing. Meanwhile, the relatively low computational cost makes it an excellent choice in practical marine applications.

  11. Remote sensing algorithm for surface evapotranspiration considering landscape and statistical effects on mixed pixels

    Directory of Open Access Journals (Sweden)

    Z. Q. Peng


    Full Text Available Evapotranspiration (ET plays an important role in surface–atmosphere interactions and can be monitored using remote sensing data. However, surface heterogeneity, including the inhomogeneity of landscapes and surface variables, significantly affects the accuracy of ET estimated from satellite data. The objective of this study is to assess and reduce the uncertainties resulting from surface heterogeneity in remotely sensed ET using Chinese HJ-1B satellite data, which is of 30 m spatial resolution in VIS/NIR bands and 300 m spatial resolution in the thermal-infrared (TIR band. A temperature-sharpening and flux aggregation scheme (TSFA was developed to obtain accurate heat fluxes from the HJ-1B satellite data. The IPUS (input parameter upscaling and TRFA (temperature resampling and flux aggregation methods were used to compare with the TSFA in this study. The three methods represent three typical schemes used to handle mixed pixels from the simplest to the most complex. IPUS handles all surface variables at coarse resolution of 300 m in this study, TSFA handles them at 30 m resolution, and TRFA handles them at 30 and 300 m resolution, which depends on the actual spatial resolution. Analyzing and comparing the three methods can help us to get a better understanding of spatial-scale errors in remote sensing of surface heat fluxes. In situ data collected during HiWATER-MUSOEXE (Multi-Scale Observation Experiment on Evapotranspiration over heterogeneous land surfaces of the Heihe Watershed Allied Telemetry Experimental Research were used to validate and analyze the methods. ET estimated by TSFA exhibited the best agreement with in situ observations, and the footprint validation results showed that the R2, MBE, and RMSE values of the sensible heat flux (H were 0.61, 0.90, and 50.99 W m−2, respectively, and those for the latent heat flux (LE were 0.82, −20.54, and 71.24 W m−2, respectively. IPUS yielded the largest errors

  12. Land Surface Temperature Retrieval from MODIS Data by Integrating Regression Models and the Genetic Algorithm in an Arid Region

    Directory of Open Access Journals (Sweden)

    Ji Zhou


    Full Text Available The land surface temperature (LST is one of the most important parameters of surface-atmosphere interactions. Methods for retrieving LSTs from satellite remote sensing data are beneficial for modeling hydrological, ecological, agricultural and meteorological processes on Earth’s surface. Many split-window (SW algorithms, which can be applied to satellite sensors with two adjacent thermal channels located in the atmospheric window between 10 μm and 12 μm, require auxiliary atmospheric parameters (e.g., water vapor content. In this research, the Heihe River basin, which is one of the most arid regions in China, is selected as the study area. The Moderate-resolution Imaging Spectroradiometer (MODIS is selected as a test case. The Global Data Assimilation System (GDAS atmospheric profiles of the study area are used to generate the training dataset through radiative transfer simulation. Significant correlations between the atmospheric upwelling radiance in MODIS channel 31 and the other three atmospheric parameters, including the transmittance in channel 31 and the transmittance and upwelling radiance in channel 32, are trained based on the simulation dataset and formulated with three regression models. Next, the genetic algorithm is used to estimate the LST. Validations of the RM-GA method are based on the simulation dataset generated from in situ measured radiosonde profiles and GDAS atmospheric profiles, the in situ measured LSTs, and a pair of daytime and nighttime MOD11A1 products in the study area. The results demonstrate that RM-GA has a good ability to estimate the LSTs directly from the MODIS data without any auxiliary atmospheric parameters. Although this research is for local application in the Heihe River basin, the findings and proposed method can easily be extended to other satellite sensors and regions with arid climates and high elevations.

  13. Determination of dissipative Dyakonov surface waves using a finite element method based eigenvalue algorithm. (United States)

    Shih, Pi-Kuei; Hsiao, Hui-Hsin; Chang, Hung-Chun


    A full-vectorial finite element method is developed to analyze the surface waves propagating at the interface between two media which could be dissipative particularly. The dissipative wave possessing a complex-valued propagation constant can be determined precisely for any given propagation direction and thus the property of losses could be thoroughly analyzed. Besides, by applying a special characteristic of the implicit circular block matrix, we reduce the computational consumptions in the analysis. By utilizing this method, the Dyakonov surface wave (DSW) at the interface between a dielectric and a metal-dielectric multilayered (MDM) structure which serves as a hyperbolic medium is discussed. Its propagation loss is smaller for larger period of the MDM structure but its field becomes less confined to the interface.

  14. Hip-Hop Is the Healer: Sense of Belonging and Diversity among Hip-Hop Collegians (United States)

    Sulé, V. Thandi


    Sense of belonging is recognized as a factor contributing to persistence to graduation. Furthermore, interactional diversity is associated with learning and civic outcomes--touted higher education goals. Hip-hop culture, one of the most influential cultural creations of the mid-20th century, has succeeded in attracting devotees from diverse…

  15. Being Hipped to Their Hop: Tapping into Young Minds through Hip Hop Play (United States)

    Broughton, Anthony


    Adults gain a wealth of knowledge from listening to the voices of children through intentional observations and interactions [Owocki, G., and Y. M. Goodman. 2002. "Kidwatching: Documenting Children's Literacy Development." Portsmouth: Heinemann]. Hip Hop play may provide optimal opportunities for teachers to tap into the young minds of…

  16. Pharmacokinetics of prenylated hop phenols in women following oral administration of a standardized extract of hops. (United States)

    van Breemen, Richard B; Yuan, Yang; Banuvar, Suzanne; Shulman, Lee P; Qiu, Xi; Alvarenga, René F Ramos; Chen, Shao-Nong; Dietz, Birgit M; Bolton, Judy L; Pauli, Guido F; Krause, Elizabeth; Viana, Marlos; Nikolic, Dejan


    Women seeking alternatives to hormone-replacement therapy for menopausal symptoms often try botanical dietary supplements containing extracts of hops (Humulus lupulus L.). Hops contain 8-prenylnaringenin (8-PN), a potent phytoestrogen, the related flavanones 6-prenylnaringenin and isoxanthohumol (IX), and the prenylated chalcone xanthohumol (XN). After chemically and biologically standardizing an extract of spent hops to these marker compounds, an escalating dose study was carried out in menopausal women to evaluate safety and pharmacokinetics. 8-PN, 6-prenylnaringenin, IX, and XN, sex hormones, and prothrombin time were determined in blood samples and/or 24 h urine samples. There was no effect on sex hormones or blood clotting. The maximum serum concentrations of the prenylated phenols were dose-dependent and were reached from 2 to 7 h, indicating slow absorption. The marker compounds formed glucuronides that were found in serum and urine. Secondary peaks at 5 h in the serum concentration-time curves indicated enterohepatic recirculation. The serum concentration-time curves indicated demethylation of IX to form 8-PN and cyclization of XN to IX. Slow absorption and enterohepatic recirculation contributed to half-lives exceeding 20 h. This human study indicated long half-lives of the estrogenic and proestrogenic prenylated phenols in hops but no acute toxicity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Extraction of bitter acids from hops and hop products using pressurized solvent extraction (PSE)

    Czech Academy of Sciences Publication Activity Database

    Čulík, J.; Jurková, M.; Horák, T.; Čejka, P.; Kellner, V.; Dvořák, J.; Karásek, Pavel; Roth, Michal


    Roč. 115, č. 3 (2009), s. 220-225 ISSN 0046-9750 R&D Projects: GA ČR GA203/08/1536; GA MŠk 1M0570 Institutional research plan: CEZ:AV0Z40310501 Keywords : hops * bitter acids * pressurized solvent extraction Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 1.000, year: 2009

  18. A constrained reduced-dimensionality search algorithm to follow chemical reactions on potential energy surfaces (United States)

    Lankau, Timm; Yu, Chin-Hui


    A constrained reduced-dimensionality algorithm can be used to efficiently locate transition states and products in reactions involving conformational changes. The search path (SP) is constructed stepwise from linear combinations of a small set of manually chosen internal coordinates, namely the predictors. The majority of the internal coordinates, the correctors, are optimized at every step of the SP to minimize the total energy of the system so that the path becomes a minimum energy path connecting products and transition states with the reactants. Problems arise when the set of predictors needs to include weak coordinates, for example, dihedral angles, as well as strong ones such as bond distances. Two principal constraining methods for the weak coordinates are proposed to mend this situation: static and dynamic constraints. Dynamic constraints are automatically activated and revoked depending on the state of the weak coordinates among the predictors, while static ones require preset control factors and act permanently. All these methods enable the successful application (4 reactions are presented involving cyclohexane, alanine dipeptide, trimethylsulfonium chloride, and azafulvene) of the reduced dimensionality method to reactions where the reaction path covers large conformational changes in addition to the formation/breaking of chemical bonds. Dynamic constraints are found to be the most efficient method as they require neither additional information about the geometry of the transition state nor fine tuning of control parameters.

  19. The Novel Artificial Intelligence Based Sub-Surface Inclusion Detection Device and Algorithm

    Directory of Open Access Journals (Sweden)

    Jong-Ha LEE


    Full Text Available We design, implement, and test a novel tactile elasticity imaging sensor to detect the elastic modulus of a contacted object. Emulating a human finger, a multi-layer polydimethylsiloxane waveguide has been fabricated as the sensing probe. The light is illuminated under the critical angle to totally reflect within the flexible and transparent waveguide. When a waveguide is compressed by an object, the contact area of the waveguide deforms and causes the light to scatter. The scattered light is captured by a high resolution camera. Multiple images are taken from slightly different loading values. The distributed forces have been estimated using the integrated pixel values of diffused lights. The displacements of the contacted object deformation have been estimated by matching the series of tactile images. For this purpose, a novel pattern matching algorithm is developed. The salient feature of this sensor is that it is capable of measuring the absolute elastic modulus value of soft materials without additional measurement units. The measurements were validated by comparing the measured elasticity of the commercial rubber samples with the known elasticity. The evaluation results showed that this type of sensor can measure elasticity within ±5.38 %.

  20. Security for multi-hop wireless networks

    CERN Document Server

    Mahmoud, Mohamed M E A


    This Springer Brief discusses efficient security protocols and schemes for multi-hop wireless networks. It presents an overview of security requirements for these networks, explores challenges in securing networks and presents system models. The authors introduce mechanisms to reduce the overhead and identify malicious nodes that drop packets intentionally. Also included is a new, efficient cooperation incentive scheme to stimulate the selfish nodes to relay information packets and enforce fairness. Many examples are provided, along with predictions for future directions of the field. Security

  1. Single-source surface energy balance algorithms to estimate evapotranspiration from satellite-based remotely sensed data (United States)

    Bhattarai, Nishan

    The flow of water and energy fluxes at the Earth's surface and within the climate system is difficult to quantify. Recent advances in remote sensing technologies have provided scientists with a useful means to improve characterization of these complex processes. However, many challenges remain that limit our ability to optimize remote sensing data in determining evapotranspiration (ET) and energy fluxes. For example, periodic cloud cover limits the operational use of remotely sensed data from passive sensors in monitoring seasonal fluxes. Additionally, there are many remote sensing-based single-source surface energy balance (SEB) models, but no clear guidance on which one to use in a particular application. Two widely used models---surface energy balance algorithm for land (SEBAL) and mapping ET at high resolution with internalized calibration (METRIC)---need substantial human-intervention that limits their applicability in broad-scale studies. This dissertation addressed some of these challenges by proposing novel ways to optimize available resources within the SEB-based ET modeling framework. A simple regression-based Landsat-Moderate Resolution Imaging Spectroradiometer (MODIS) fusion model was developed to integrate Landsat spatial and MODIS temporal characteristics in calculating ET. The fusion model produced reliable estimates of seasonal ET at moderate spatial resolution while mitigating the impact that cloud cover can have on image availability. The dissertation also evaluated five commonly used remote sensing-based single-source SEB models and found the surface energy balance system (SEBS) may be the best overall model for use in humid subtropical climates. The study also determined that model accuracy varies with land cover type, for example, all models worked well for wet marsh conditions, but the SEBAL and simplified surface energy balance index (S-SEBI) models worked better than the alternatives for grass cover. A new automated approach based on

  2. Solvent-assisted multistage nonequilibrium electron transfer in rigid supramolecular systems: Diabatic free energy surfaces and algorithms for numerical simulations (United States)

    Feskov, Serguei V.; Ivanov, Anatoly I.


    An approach to the construction of diabatic free energy surfaces (FESs) for ultrafast electron transfer (ET) in a supramolecule with an arbitrary number of electron localization centers (redox sites) is developed, supposing that the reorganization energies for the charge transfers and shifts between all these centers are known. Dimensionality of the coordinate space required for the description of multistage ET in this supramolecular system is shown to be equal to N - 1, where N is the number of the molecular centers involved in the reaction. The proposed algorithm of FES construction employs metric properties of the coordinate space, namely, relation between the solvent reorganization energy and the distance between the two FES minima. In this space, the ET reaction coordinate zn n' associated with electron transfer between the nth and n'th centers is calculated through the projection to the direction, connecting the FES minima. The energy-gap reaction coordinates zn n' corresponding to different ET processes are not in general orthogonal so that ET between two molecular centers can create nonequilibrium distribution, not only along its own reaction coordinate but along other reaction coordinates too. This results in the influence of the preceding ET steps on the kinetics of the ensuing ET. It is important for the ensuing reaction to be ultrafast to proceed in parallel with relaxation along the ET reaction coordinates. Efficient algorithms for numerical simulation of multistage ET within the stochastic point-transition model are developed. The algorithms are based on the Brownian simulation technique with the recrossing-event detection procedure. The main advantages of the numerical method are (i) its computational complexity is linear with respect to the number of electronic states involved and (ii) calculations can be naturally parallelized up to the level of individual trajectories. The efficiency of the proposed approach is demonstrated for a model

  3. A Semiautomated Multilayer Picking Algorithm for Ice-sheet Radar Echograms Applied to Ground-Based Near-Surface Data (United States)

    Onana, Vincent De Paul; Koenig, Lora Suzanne; Ruth, Julia; Studinger, Michael; Harbeck, Jeremy P.


    Snow accumulation over an ice sheet is the sole mass input, making it a primary measurement for understanding the past, present, and future mass balance. Near-surface frequency-modulated continuous-wave (FMCW) radars image isochronous firn layers recording accumulation histories. The Semiautomated Multilayer Picking Algorithm (SAMPA) was designed and developed to trace annual accumulation layers in polar firn from both airborne and ground-based radars. The SAMPA algorithm is based on the Radon transform (RT) computed by blocks and angular orientations over a radar echogram. For each echogram's block, the RT maps firn segmented-layer features into peaks, which are picked using amplitude and width threshold parameters of peaks. A backward RT is then computed for each corresponding block, mapping the peaks back into picked segmented-layers. The segmented layers are then connected and smoothed to achieve a final layer pick across the echogram. Once input parameters are trained, SAMPA operates autonomously and can process hundreds of kilometers of radar data picking more than 40 layers. SAMPA final pick results and layer numbering still require a cursory manual adjustment to correct noncontinuous picks, which are likely not annual, and to correct for inconsistency in layer numbering. Despite the manual effort to train and check SAMPA results, it is an efficient tool for picking multiple accumulation layers in polar firn, reducing time over manual digitizing efforts. The trackability of good detected layers is greater than 90%.

  4. Locating critical points on multi-dimensional surfaces by genetic algorithm: test cases including normal and perturbed argon clusters (United States)

    Chaudhury, Pinaki; Bhattacharyya, S. P.


    It is demonstrated that Genetic Algorithm in a floating point realisation can be a viable tool for locating critical points on a multi-dimensional potential energy surface (PES). For small clusters, the standard algorithm works well. For bigger ones, the search for global minimum becomes more efficient when used in conjunction with coordinate stretching, and partitioning of the strings into a core part and an outer part which are alternately optimized The method works with equal facility for locating minima, local as well as global, and saddle points (SP) of arbitrary orders. The search for minima requires computation of the gradient vector, but not the Hessian, while that for SP's requires the information of the gradient vector and the Hessian, the latter only at some specific points on the path. The method proposed is tested on (i) a model 2-d PES (ii) argon clusters (Ar 4-Ar 30) in which argon atoms interact via Lennard-Jones potential, (iii) Ar mX, m=12 clusters where X may be a neutral atom or a cation. We also explore if the method could also be used to construct what may be called a stochastic representation of the reaction path on a given PES with reference to conformational changes in Ar n clusters.

  5. Variable range hopping conduction and microstructure properties of semiconducting Co-doped TiO2

    International Nuclear Information System (INIS)

    Okutan, Mustafa; Bakan, Halil I.; Korkmaz, Kemal; Yakuphanoglu, Fahrettin


    The surface morphology, phases existing in the microstructure and conductivity behavior of Co-doped TiO2 have been investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), electrical conductivity measurements and X-ray diffraction technique. The semiconducting phase is found to obey Mott's variable range hopping mechanism of the conduction. The conduction mechanism of the ceramic shows a crossover from the, exp[-(T0/T)1/4] law to a simply activated law, exp(-ΔE/kT). This behavior is attributed to temperature-induced transition from 3D to thermally activated behavior. The hopping conduction parameters such as the characteristic temperature (T0), localization length (α), hopping distance (R), activation energy (ΔE) and density of states at Fermi level (N(EF) have been calculated. Surface morphology shows that the ceramic has a regular surface. The SEM study indicates that there are grains which have a certain type in the microstructure. Rutile phases with different plane in microstructure were found

  6. Chicano Hip-Hop as Interethnic Contact Zone (United States)

    McFarland, Pancho


    The critical study of rap music and hip-hop culture has the potential to expand Americans understanding of race and culture in the United States. Hip-hop culture as a multiracial, multiethnic phenomenon reveals the ways in which race relations over the past thirty years have become increasingly complex. The theories and concepts that they use to…

  7. Hip Hop Is Now: An Evolving Youth Culture (United States)

    Taylor, Carl; Taylor, Virgil


    Emerging from Rap music, Hip Hop has become a lifestyle to many modern youth around the world. Embodying both creativity and controversy, Hip Hop mirrors the values, violence, and hypocrisy of modern culture. The authors dispel some of the simplistic views that surround this evolving youth movement embraced by millions of young people who are…

  8. Framing and Reviewing Hip-Hop Educational Research (United States)

    Petchauer, Emery


    Hip-hop has become relevant to the field of education because of its implications for understanding language, learning, identity, curriculum, and other areas. This integrative review provides historical context and cohesion for the burgeoning and discursive body of hip-hop scholarship by framing it according to three heuristic categories and…

  9. Romani Music - Roma and the Hip-hop Culture


    Dočkal, Tomáš


    This thesis is focused on Romani music and its importance for the Romani culture. It examines the popularity of hip-hop among the young Romani generation and Romani hip- hip production. It attempts to define the role of hip-hop culture in young Romanies' lives.

  10. Being Hip-Hop: Beyond Skills and Songs (United States)

    Kruse, Adam J.


    In this article, I offer four principles relevant to hip-hop cultures (keep it real, flip the script, make some noise, and stay fresh) and explore how these principles might affect music classrooms. I argue that a music classroom that works to keep it real, flip the script, make some noise, and stay fresh might go beyond teaching hip-hop skills…

  11. Towards a Pedagogy of Hip Hop in Urban Teacher Education (United States)

    Bridges, Thurman


    This article draws from a qualitative study often Black male K-12 teachers from the Hip Hop Generation who are closely connected to Hip Hop culture and have been effective in addressing the academic and social needs of Black boys. Through an analysis of their social, educational and cultural experiences, this article highlights three organizing…

  12. Framing Hip Hop: New Methodologies for New Times (United States)

    Dimitriadis, Greg


    This article revisits the central impulse behind early advocacy for ethnographic approaches to hip hop--that critics should try as much as possible to limit their own certainties around what hip hop can and might mean. While ethnographic approaches can engender the kinds of personal dislocations that allow for this negotiation, they do not…

  13. Investigating Cultural Collision: Educators' Perceptions of Hip-Hop Culture (United States)

    Beachum, Floyd D.


    Hip-hop music has been embraced worldwide by youth, pummeled in the media for supposedly increasing social misery and hailed as a significant musical breakthrough. Hip-hop culture has transcended musical boundaries and now impacts speech, clothing, mannerisms, movies, websites, television programming, magazines, and energy drinks (Dyson, 2007;…

  14. Hip-Hop, the "Obama Effect," and Urban Science Education (United States)

    Emdin, Christopher; Lee, Okhee


    Background/Context: With the ever increasing diversity of schools, and the persistent need to develop teaching strategies for the students who attend today's urban schools, hip-hop culture has been proposed to be a means through which urban youth can find success in school. As a result, studies of the role of hip-hop in urban education have grown…

  15. Christian Hip Hop as Pedagogy: A South African Case Study (United States)

    Abraham, Ibrahim


    Drawing on interviews with creators of Christian hip hop music in South Africa, this article demonstrates that this genre of popular music and youth culture is utilised as a form of pedagogy to transmit religious beliefs and values to contemporary youth. The pedagogical aspects of hip hop have been recognised in research on the topic, but the…

  16. Toward Hip-Hop Pedagogies for Music Education (United States)

    Kruse, Adam J.


    Music education scholarship in the areas of popular, vernacular, and participatory musicianship has grown in the past decades; however, music education research concerned specifically with hip-hop has been relatively scarce. Because hip-hop music can differ tremendously from the traditional western genres with which many music educators are most…

  17. Gap solitons in periodic Schrodinger lattice system with nonlinear hopping

    Directory of Open Access Journals (Sweden)

    Ming Cheng


    Full Text Available This article concerns the periodic discrete Schrodinger equation with nonlinear hopping on the infinite integer lattice. We obtain the existence of gap solitons by the linking theorem and concentration compactness method together with a periodic approximation technique. In addition, the behavior of such solutions is studied as $\\alpha\\to 0$. Notice that the nonlinear hopping can be sign changing.

  18. Hip Hop as Empowerment: Voices in El Alto, Bolivia (United States)

    Tarifa, Ariana


    In response to neoliberal policies that have been in place since 1985, Bolivian young people have increasingly used hip hop music as a means of protest and to reclaim social and political participation. Hip hop in Latin America tells the story of the struggles that marginalized people have suffered, and speaks to the effects of international…

  19. Role of correlated hopping in mixed valence phenomena

    Indian Academy of Sciences (India)

    Abstract. Role of correlated hopping is studied using extended Falicov–Kimball model in a small cluster. A discontinuous insulator-to-metal transition is observed at a critical f-level energy. Transition is sharper for larger correlated hopping. In the specific heat curves a two-peak struc- ture consisting of a sharp peak followed ...

  20. Hop powdery mildew control through alteration of spring pruning practices (United States)

    Since 1997, Podosphaera macularis, the causal agent of hop powdery mildew, has become a recurrent threat to hops in the Pacific Northwest because of the potential to reduce cone yield and quality. Disease management practices often involve preventative fungicide applications, but alternative approac...

  1. Factors of Intensification in the Hops Cluster of Chuvashia (United States)

    Zakharov, Anatoly I.; Evgrafov, Oleg V.; Zakharov, Dmitry A.; Ivanova, Elena V.; Tolstova, Marija L.; Tsaregorodtsev, Evgeny I.


    The complex analysis of development of hop-growing for 1971-2015 is carried out. In the conditions of the field experiment made in the Chuvash Republic hop-growing intensification elements--technology of its cultivation, mechanization are fulfilled. Based on researches it is established that the main internal allowance of increase in efficiency of…

  2. Advancing of Land Surface Temperature Retrieval Using Extreme Learning Machine and Spatio-Temporal Adaptive Data Fusion Algorithm

    Directory of Open Access Journals (Sweden)

    Yang Bai


    Full Text Available As a critical variable to characterize the biophysical processes in ecological environment, and as a key indicator in the surface energy balance, evapotranspiration and urban heat islands, Land Surface Temperature (LST retrieved from Thermal Infra-Red (TIR images at both high temporal and spatial resolution is in urgent need. However, due to the limitations of the existing satellite sensors, there is no earth observation which can obtain TIR at detailed spatial- and temporal-resolution simultaneously. Thus, several attempts of image fusion by blending the TIR data from high temporal resolution sensor with data from high spatial resolution sensor have been studied. This paper presents a novel data fusion method by integrating image fusion and spatio-temporal fusion techniques, for deriving LST datasets at 30 m spatial resolution from daily MODIS image and Landsat ETM+ images. The Landsat ETM+ TIR data were firstly enhanced based on extreme learning machine (ELM algorithm using neural network regression model, from 60 m to 30 m resolution. Then, the MODIS LST and enhanced Landsat ETM+ TIR data were fused by Spatio-temporal Adaptive Data Fusion Algorithm for Temperature mapping (SADFAT in order to derive high resolution synthetic data. The synthetic images were evaluated for both testing and simulated satellite images. The average difference (AD and absolute average difference (AAD are smaller than 1.7 K, where the correlation coefficient (CC and root-mean-square error (RMSE are 0.755 and 1.824, respectively, showing that the proposed method enhances the spatial resolution of the predicted LST images and preserves the spectral information at the same time.

  3. Multi-hop conjugation based bacteria nanonetworks. (United States)

    Balasubramaniam, Sasitharan; Lio', Pietro


    Molecular communication is a new paradigm for nanomachines to exchange information, by utilizing biological mechanism and/or components to transfer information (e.g., molecular diffusion, neuronal networks, molecular motors). One possible approach for molecular communication is through the use of bacteria, which can act as carriers for DNA-based information, i.e., plasmids. This paper analyzes multi-hop molecular nanonetworks that utilize bacteria as a carrier. The proposed approach combines different properties of bacteria to enable multi-hop transmission, such as conjugation and chemotaxis-based motility. Various analyses have been performed, including the correlation between the success rate of plasmid delivery to the destination node, and the role of conjugation in enabling this; as well as analyses on the impact of large topology shapes (e.g., Grid, Random, and Scale-free) on the success rate of plasmid delivery for multiple source-destination nanonetworks. A further solution proposed in this paper is the application of antibiotics to act as filters on illegitimate messages that could be delivered by the bacteria. Our evaluation, which has been conducted through a series of simulations, has shown that numerous bacteria properties fit to properties required for communication networking (e.g., packet filtering, routing, addressing).

  4. An algorithm for analytical solution of basic problems featuring elastostatic bodies with cavities and surface flaws (United States)

    Penkov, V. B.; Levina, L. V.; Novikova, O. S.; Shulmin, A. S.


    Herein we propose a methodology for structuring a full parametric analytical solution to problems featuring elastostatic media based on state-of-the-art computing facilities that support computerized algebra. The methodology includes: direct and reverse application of P-Theorem; methods of accounting for physical properties of media; accounting for variable geometrical parameters of bodies, parameters of boundary states, independent parameters of volume forces, and remote stress factors. An efficient tool to address the task is the sustainable method of boundary states originally designed for the purposes of computerized algebra and based on the isomorphism of Hilbertian spaces of internal states and boundary states of bodies. We performed full parametric solutions of basic problems featuring a ball with a nonconcentric spherical cavity, a ball with a near-surface flaw, and an unlimited medium with two spherical cavities.

  5. An Orthogonal Projection Algorithm to Suppress Interference in High-Frequency Surface Wave Radar

    Directory of Open Access Journals (Sweden)

    Zezong Chen


    Full Text Available High-frequency surface wave radar (HFSWR has been widely applied in sea-state monitoring, and its performance is known to suffer from various unwanted interferences and clutters. Radio frequency interference (RFI from other radiating sources and ionospheric clutter dominate the various types of unwanted signals because the HF band is congested with many users and the ionosphere propagates interference from distant sources. In this paper, various orthogonal projection schemes are summarized, and three new schemes are proposed for interference cancellation. Simulations and field data recorded by experimental multi-frequency HFSWR from Wuhan University are used to evaluate the cancellation performances of these schemes with respect to both RFI and ionospheric clutter. The processing results may provide a guideline for identifying the appropriate orthogonal projection cancellation schemes in various HFSWR applications.

  6. Vortex variable range hopping in a conventional superconducting film (United States)

    Percher, Ilana M.; Volotsenko, Irina; Frydman, Aviad; Shklovskii, Boris I.; Goldman, Allen M.


    The behavior of a disordered amorphous thin film of superconducting indium oxide has been studied as a function of temperature and magnetic field applied perpendicular to its plane. A superconductor-insulator transition has been observed, though the isotherms do not cross at a single point. The curves of resistance versus temperature on the putative superconducting side of this transition, where the resistance decreases with decreasing temperature, obey two-dimensional Mott variable-range hopping of vortices over wide ranges of temperature and resistance. To estimate the parameters of hopping, the film is modeled as a granular system and the hopping of vortices is treated in a manner analogous to hopping of charges. The reason the long-range interaction between vortices over the range of magnetic fields investigated does not lead to a stronger variation of resistance with temperature than that of two-dimensional Mott variable-range hopping remains unresolved.

  7. Cuckoo Search Algorithm with Lévy Flights for Global-Support Parametric Surface Approximation in Reverse Engineering

    Directory of Open Access Journals (Sweden)

    Andrés Iglesias


    Full Text Available This paper concerns several important topics of the Symmetry journal, namely, computer-aided design, computational geometry, computer graphics, visualization, and pattern recognition. We also take advantage of the symmetric structure of the tensor-product surfaces, where the parametric variables u and v play a symmetric role in shape reconstruction. In this paper we address the general problem of global-support parametric surface approximation from clouds of data points for reverse engineering applications. Given a set of measured data points, the approximation is formulated as a nonlinear continuous least-squares optimization problem. Then, a recent metaheuristics called Cuckoo Search Algorithm (CSA is applied to compute all relevant free variables of this minimization problem (namely, the data parameters and the surface poles. The method includes the iterative generation of new solutions by using the Lévy flights to promote the diversity of solutions and prevent stagnation. A critical advantage of this method is its simplicity: the CSA requires only two parameters, many fewer than any other metaheuristic approach, so the parameter tuning becomes a very easy task. The method is also simple to understand and easy to implement. Our approach has been applied to a benchmark of three illustrative sets of noisy data points corresponding to surfaces exhibiting several challenging features. Our experimental results show that the method performs very well even for the cases of noisy and unorganized data points. Therefore, the method can be directly used for real-world applications for reverse engineering without further pre/post-processing. Comparative work with the most classical mathematical techniques for this problem as well as a recent modification of the CSA called Improved CSA (ICSA is also reported. Two nonparametric statistical tests show that our method outperforms the classical mathematical techniques and provides equivalent results to ICSA

  8. The Parallel SBAS-DInSAR algorithm: an effective and scalable tool for Earth's surface displacement retrieval (United States)

    Zinno, Ivana; De Luca, Claudio; Elefante, Stefano; Imperatore, Pasquale; Manunta, Michele; Casu, Francesco


    been carried out on real data acquired by ENVISAT and COSMO-SkyMed sensors. Moreover, the P-SBAS performances with respect to the size of the input dataset will also be investigated. This kind of analysis is essential for assessing the goodness of the P-SBAS algorithm and gaining insight into its applicability to different scenarios. Besides, such results will also become crucial to identify and evaluate how to appropriately exploit P-SBAS to process the forthcoming large Sentinel-1 data stream. References [1] Massonnet, D., Briole, P., Arnaud, A., "Deflation of Mount Etna monitored by Spaceborne Radar Interferometry", Nature, vol. 375, pp. 567-570, 1995. [2] Berardino, P., G. Fornaro, R. Lanari, and E. Sansosti, "A new algorithm for surface deformation monitoring based on small baseline differential SAR interferograms", IEEE Trans. Geosci. Remote Sens., vol. 40, no. 11, pp. 2375-2383, Nov. 2002. [3] Elefante, S., Imperatore, P. , Zinno, I., M. Manunta, E. Mathot, F. Brito, J. Farres, W. Lengert, R. Lanari, F. Casu, "SBAS-DINSAR Time series generation on cloud computing platforms", IEEE IGARSS 2013, July 2013, Melbourne (AU). [4] Zinno, P. Imperatore, S. Elefante, F. Casu, M. Manunta, E. Mathot, F. Brito, J. Farres, W. Lengert, R. Lanari, "A Novel Parallel Computational Framework for Processing Large INSAR Data Sets", Living Planet Symposium 2013, Sept. 9-13, 2013.

  9. Hip Hop Culture's OGs: A Narrative Inquiry into the Intersection of Hip Hop Culture, Black Males and Their Schooling Experiences (United States)

    Buchanan, Ian P.


    Using a critical race lens, this narrative study employs a focus group design to explore the intersections between black males, hip hop culture and schooling experiences. To provide a sociocultural grounding, this study first reviews the research literature around hip hop culture.s sociocultural development and its impact as a culture force that…

  10. Hip-Hop Is My Passport! Using Hip-Hop and Digital Literacies to Understand Global Citizenship Education (United States)

    Horton, Akesha Monique


    Hip-hop has exploded around the world among youth. It is not simply an American source of entertainment; it is a global cultural movement that provides a voice for youth worldwide who have not been able to express their "cultural world" through mainstream media. The emerging field of critical hip-hop pedagogy has produced little…

  11. Power and delay optimisation in multi-hop wireless networks

    KAUST Repository

    Xia, Li


    In this paper, we study the optimisation problem of transmission power and delay in a multi-hop wireless network consisting of multiple nodes. The goal is to determine the optimal policy of transmission rates at various buffer and channel states in order to minimise the power consumption and the queueing delay of the whole network. With the assumptions of interference-free links and independently and identically distributed (i.i.d.) channel states, we formulate this problem using a semi-open Jackson network model for data transmission and a Markov model for channel states transition. We derive a difference equation of the system performance under any two different policies. The necessary and sufficient condition of optimal policy is obtained. We also prove that the system performance is monotonic with respect to (w.r.t.) the transmission rate and the optimal transmission rate can be either maximal or minimal. That is, the ‘bang-bang’ control is an optimal control. This optimality structure greatly reduces the problem complexity. Furthermore, we develop an iterative algorithm to find the optimal solution. Finally, we conduct the simulation experiments to demonstrate the effectiveness of our approach. We hope our work can shed some insights on solving this complicated optimisation problem.

  12. High-resolution random mesh algorithms for creating a probabilistic 3D surface atlas of the human brain. (United States)

    Thompson, P M; Schwartz, C; Toga, A W


    Striking variations exist, across individuals, in the internal and external geometry of the brain. Such normal variations in the size, orientation, topology, and geometric complexity of cortical and subcortical structures have complicated the problem of quantifying deviations from normal anatomy and of developing standardized neuroanatomical atlases. This paper describes the design, implementation, and results of a technique for creating a three-dimensional (3D) probabilistic surface atlas of the human brain. We have developed, implemented, and tested a new 3D statistical method for assessing structural variations in a data-base of anatomic images. The algorithm enables the internal surface anatomy of new subjects to be analyzed at an extremely local level. The goal was to quantify subtle and distributed patterns of deviation from normal anatomy by automatically generating detailed probability maps of the anatomy of new subjects. Connected systems of parametric meshes were used to model the internal course of the following structures in both hemispheres: the parieto-occipital sulcus, the anterior and posterior rami of the calcarine sulcus, the cingulate and marginal sulci, and the supracallosal sulcus. These sulci penetrate sufficiently deeply into the brain to introduce an obvious topological decomposition of its volume architecture. A family of surface maps was constructed, encoding statistical properties of local anatomical variation within individual sulci. A probability space of random transformations, based on the theory of Gaussian random fields, was developed to reflect the observed variability in stereotaxic space of the connected system of anatomic surfaces. A complete system of probability density functions was computed, yielding confidence limits on surface variation. The ultimate goal of brain mapping is to provide a framework for integrating functional and anatomical data across many subjects and modalities. This task requires precise quantitative

  13. The Algorithm Theoretical Basis Document for the Derivation of Range and Range Distributions from Laser Pulse Waveform Analysis for Surface Elevations, Roughness, Slope, and Vegetation Heights (United States)

    Brenner, Anita C.; Zwally, H. Jay; Bentley, Charles R.; Csatho, Bea M.; Harding, David J.; Hofton, Michelle A.; Minster, Jean-Bernard; Roberts, LeeAnne; Saba, Jack L.; Thomas, Robert H.; hide


    The primary purpose of the GLAS instrument is to detect ice elevation changes over time which are used to derive changes in ice volume. Other objectives include measuring sea ice freeboard, ocean and land surface elevation, surface roughness, and canopy heights over land. This Algorithm Theoretical Basis Document (ATBD) describes the theory and implementation behind the algorithms used to produce the level 1B products for waveform parameters and global elevation and the level 2 products that are specific to ice sheet, sea ice, land, and ocean elevations respectively. These output products, are defined in detail along with the associated quality, and the constraints, and assumptions used to derive them.

  14. A coupled remote sensing and the Surface Energy Balance with Topography Algorithm (SEBTA to estimate actual evapotranspiration over heterogeneous terrain

    Directory of Open Access Journals (Sweden)

    Z. Q. Gao


    Full Text Available Evapotranspiration (ET may be used as an ecological indicator to address the ecosystem complexity. The accurate measurement of ET is of great significance for studying environmental sustainability, global climate changes, and biodiversity. Remote sensing technologies are capable of monitoring both energy and water fluxes on the surface of the Earth. With this advancement, existing models, such as SEBAL, S_SEBI and SEBS, enable us to estimate the regional ET with limited temporal and spatial coverage in the study areas. This paper extends the existing modeling efforts with the inclusion of new components for ET estimation at different temporal and spatial scales under heterogeneous terrain with varying elevations, slopes and aspects. Following a coupled remote sensing and surface energy balance approach, this study emphasizes the structure and function of the Surface Energy Balance with Topography Algorithm (SEBTA. With the aid of the elevation and landscape information, such as slope and aspect parameters derived from the digital elevation model (DEM, and the vegetation cover derived from satellite images, the SEBTA can account for the dynamic impacts of heterogeneous terrain and changing land cover with some varying kinetic parameters (i.e., roughness and zero-plane displacement. Besides, the dry and wet pixels can be recognized automatically and dynamically in image processing thereby making the SEBTA more sensitive to derive the sensible heat flux for ET estimation. To prove the application potential, the SEBTA was carried out to present the robust estimates of 24 h solar radiation over time, which leads to the smooth simulation of the ET over seasons in northern China where the regional climate and vegetation cover in different seasons compound the ET calculations. The SEBTA was validated by the measured data at the ground level. During validation, it shows that the consistency index reached 0.92 and the correlation coefficient was 0.87.

  15. A coupled remote sensing and the Surface Energy Balance with Topography Algorithm (SEBTA) to estimate actual evapotranspiration over heterogeneous terrain (United States)

    Gao, Z. Q.; Liu, C. S.; Gao, W.; Chang, N.-B.


    Evapotranspiration (ET) may be used as an ecological indicator to address the ecosystem complexity. The accurate measurement of ET is of great significance for studying environmental sustainability, global climate changes, and biodiversity. Remote sensing technologies are capable of monitoring both energy and water fluxes on the surface of the Earth. With this advancement, existing models, such as SEBAL, S_SEBI and SEBS, enable us to estimate the regional ET with limited temporal and spatial coverage in the study areas. This paper extends the existing modeling efforts with the inclusion of new components for ET estimation at different temporal and spatial scales under heterogeneous terrain with varying elevations, slopes and aspects. Following a coupled remote sensing and surface energy balance approach, this study emphasizes the structure and function of the Surface Energy Balance with Topography Algorithm (SEBTA). With the aid of the elevation and landscape information, such as slope and aspect parameters derived from the digital elevation model (DEM), and the vegetation cover derived from satellite images, the SEBTA can account for the dynamic impacts of heterogeneous terrain and changing land cover with some varying kinetic parameters (i.e., roughness and zero-plane displacement). Besides, the dry and wet pixels can be recognized automatically and dynamically in image processing thereby making the SEBTA more sensitive to derive the sensible heat flux for ET estimation. To prove the application potential, the SEBTA was carried out to present the robust estimates of 24 h solar radiation over time, which leads to the smooth simulation of the ET over seasons in northern China where the regional climate and vegetation cover in different seasons compound the ET calculations. The SEBTA was validated by the measured data at the ground level. During validation, it shows that the consistency index reached 0.92 and the correlation coefficient was 0.87.

  16. A coupled remote sensing and the Surface Energy Balance with Topography Algorithm (SEBTA) to estimate actual evapotranspiration under complex terrain (United States)

    Gao, Z. Q.; Liu, C. S.; Gao, W.; Chang, N. B.


    Evapotranspiration (ET) may be used as an ecological indicator to address the ecosystem complexity. The accurate measurement of ET is of great significance for studying environmental sustainability, global climate changes, and biodiversity. Remote sensing technologies are capable of monitoring both energy and water fluxes on the surface of the Earth. With this advancement, existing models, such as SEBAL, S_SEBI and SEBS, enable us to estimate the regional ET with limited temporal and spatial scales. This paper extends the existing modeling efforts with the inclusion of new components for ET estimation at varying temporal and spatial scales under complex terrain. Following a coupled remote sensing and surface energy balance approach, this study emphasizes the structure and function of the Surface Energy Balance with Topography Algorithm (SEBTA). With the aid of the elevation and landscape information, such as slope and aspect parameters derived from the digital elevation model (DEM), and the vegetation cover derived from satellite images, the SEBTA can fully account for the dynamic impacts of complex terrain and changing land cover in concert with some varying kinetic parameters (i.e., roughness and zero-plane displacement) over time. Besides, the dry and wet pixels can be recognized automatically and dynamically in image processing thereby making the SEBTA more sensitive to derive the sensible heat flux for ET estimation. To prove the application potential, the SEBTA was carried out to present the robust estimates of 24 h solar radiation over time, which leads to the smooth simulation of the ET over seasons in northern China where the regional climate and vegetation cover in different seasons compound the ET calculations. The SEBTA was validated by the measured data at the ground level. During validation, it shows that the consistency index reached 0.92 and the correlation coefficient was 0.87.

  17. Communication devices for network-hopping communications and methods of network-hopping communications (United States)

    Buttles, John W


    Wireless communication devices include a software-defined radio coupled to processing circuitry. The system controller is configured to execute computer programming code. Storage media is coupled to the system controller and includes computer programming code configured to cause the system controller to configure and reconfigure the software-defined radio to operate on each of a plurality of communication networks according to a selected sequence. Methods for communicating with a wireless device and methods of wireless network-hopping are also disclosed.

  18. Surface electromyography based muscle fatigue detection using high-resolution time-frequency methods and machine learning algorithms. (United States)

    Karthick, P A; Ghosh, Diptasree Maitra; Ramakrishnan, S


    Surface electromyography (sEMG) based muscle fatigue research is widely preferred in sports science and occupational/rehabilitation studies due to its noninvasiveness. However, these signals are complex, multicomponent and highly nonstationary with large inter-subject variations, particularly during dynamic contractions. Hence, time-frequency based machine learning methodologies can improve the design of automated system for these signals. In this work, the analysis based on high-resolution time-frequency methods, namely, Stockwell transform (S-transform), B-distribution (BD) and extended modified B-distribution (EMBD) are proposed to differentiate the dynamic muscle nonfatigue and fatigue conditions. The nonfatigue and fatigue segments of sEMG signals recorded from the biceps brachii of 52 healthy volunteers are preprocessed and subjected to S-transform, BD and EMBD. Twelve features are extracted from each method and prominent features are selected using genetic algorithm (GA) and binary particle swarm optimization (BPSO). Five machine learning algorithms, namely, naïve Bayes, support vector machine (SVM) of polynomial and radial basis kernel, random forest and rotation forests are used for the classification. The results show that all the proposed time-frequency distributions (TFDs) are able to show the nonstationary variations of sEMG signals. Most of the features exhibit statistically significant difference in the muscle fatigue and nonfatigue conditions. The maximum number of features (66%) is reduced by GA and BPSO for EMBD and BD-TFD respectively. The combination of EMBD- polynomial kernel based SVM is found to be most accurate (91% accuracy) in classifying the conditions with the features selected using GA. The proposed methods are found to be capable of handling the nonstationary and multicomponent variations of sEMG signals recorded in dynamic fatiguing contractions. Particularly, the combination of EMBD- polynomial kernel based SVM could be used to

  19. An Automated Algorithm for Producing Land Cover Information from Landsat Surface Reflectance Data Acquired Between 1984 and Present (United States)

    Rover, J.; Goldhaber, M. B.; Holen, C.; Dittmeier, R.; Wika, S.; Steinwand, D.; Dahal, D.; Tolk, B.; Quenzer, R.; Nelson, K.; Wylie, B. K.; Coan, M.


    Multi-year land cover mapping from remotely sensed data poses challenges. Producing land cover products at spatial and temporal scales required for assessing longer-term trends in land cover change are typically a resource-limited process. A recently developed approach utilizes open source software libraries to automatically generate datasets, decision tree classifications, and data products while requiring minimal user interaction. Users are only required to supply coordinates for an area of interest, land cover from an existing source such as National Land Cover Database and percent slope from a digital terrain model for the same area of interest, two target acquisition year-day windows, and the years of interest between 1984 and present. The algorithm queries the Landsat archive for Landsat data intersecting the area and dates of interest. Cloud-free pixels meeting the user's criteria are mosaicked to create composite images for training the classifiers and applying the classifiers. Stratification of training data is determined by the user and redefined during an iterative process of reviewing classifiers and resulting predictions. The algorithm outputs include yearly land cover raster format data, graphics, and supporting databases for further analysis. Additional analytical tools are also incorporated into the automated land cover system and enable statistical analysis after data are generated. Applications tested include the impact of land cover change and water permanence. For example, land cover conversions in areas where shrubland and grassland were replaced by shale oil pads during hydrofracking of the Bakken Formation were quantified. Analytical analysis of spatial and temporal changes in surface water included identifying wetlands in the Prairie Pothole Region of North Dakota with potential connectivity to ground water, indicating subsurface permeability and geochemistry.

  20. Power-Hop: A Pervasive Observation for Real Complex Networks. (United States)

    Papalexakis, Evangelos; Hooi, Bryan; Pelechrinis, Konstantinos; Faloutsos, Christos


    Complex networks have been shown to exhibit universal properties, with one of the most consistent patterns being the scale-free degree distribution, but are there regularities obeyed by the r-hop neighborhood in real networks? We answer this question by identifying another power-law pattern that describes the relationship between the fractions of node pairs C(r) within r hops and the hop count r. This scale-free distribution is pervasive and describes a large variety of networks, ranging from social and urban to technological and biological networks. In particular, inspired by the definition of the fractal correlation dimension D2 on a point-set, we consider the hop-count r to be the underlying distance metric between two vertices of the network, and we examine the scaling of C(r) with r. We find that this relationship follows a power-law in real networks within the range 2 ≤ r ≤ d, where d is the effective diameter of the network, that is, the 90-th percentile distance. We term this relationship as power-hop and the corresponding power-law exponent as power-hop exponent h. We provide theoretical justification for this pattern under successful existing network models, while we analyze a large set of real and synthetic network datasets and we show the pervasiveness of the power-hop.

  1. Particle hopping vs. fluid-dynamical models for traffic flow

    Energy Technology Data Exchange (ETDEWEB)

    Nagel, K.


    Although particle hopping models have been introduced into traffic science in the 19509, their systematic use has only started recently. Two reasons for this are, that they are advantageous on modem computers, and that recent theoretical developments allow analytical understanding of their properties and therefore more confidence for their use. In principle, particle hopping models fit between microscopic models for driving and fluiddynamical models for traffic flow. In this sense, they also help closing the conceptual gap between these two. This paper shows connections between particle hopping models and traffic flow theory. It shows that the hydrodynamical limits of certain particle hopping models correspond to the Lighthill-Whitham theory for traffic flow, and that only slightly more complex particle hopping models produce already the correct traffic jam dynamics, consistent with recent fluid-dynamical models for traffic flow. By doing so, this paper establishes that, on the macroscopic level, particle hopping models are at least as good as fluid-dynamical models. Yet, particle hopping models have at least two advantages over fluid-dynamical models: they straightforwardly allow microscopic simulations, and they include stochasticity.

  2. Job-hopping and New Firm Survival

    DEFF Research Database (Denmark)

    Failla, Virgilio

    The paper builds on Lazear´s (2005) jack-of-all-trades theory according to which individuals who invest in a balanced set of skills become entrepreneurs, while workers who specialize in a particular skill prefer to choose wage employment. Although a number of studies provide empirical support...... for this theory, little is known about the characteristics of this so called `balanced´ skills set. Do entrepreneurial outcomes of individuals presenting a highly varied work experiences differ from entrepreneurs with a less varied career' In particular, how do the characteristics of the entrepreneurs´ job......-hopping experience prior to the founding affect the growth of the new venture' It is well established that the industry and managerial pre-entry experience of the founder is beneficial. Experienced entrepreneurs are better at identifying opportunities (Shane, 2000), learning (Dencker, Gruber and Shah 2008), and have...

  3. Bit-padding information guided channel hopping

    KAUST Repository

    Yang, Yuli


    In the context of multiple-input multiple-output (MIMO) communications, we propose a bit-padding information guided channel hopping (BP-IGCH) scheme which breaks the limitation that the number of transmit antennas has to be a power of two based on the IGCH concept. The proposed scheme prescribes different bit-lengths to be mapped onto the indices of the transmit antennas and then uses padding technique to avoid error propagation. Numerical results and comparisons, on both the capacity and the bit error rate performances, are provided and show the advantage of the proposed scheme. The BP-IGCH scheme not only offers lower complexity to realize the design flexibility, but also achieves better performance. © 2011 IEEE.

  4. Landing mechanics during side hopping and crossover hopping maneuvers in noninjured women and women with anterior cruciate ligament reconstruction. (United States)

    Ortiz, Alexis; Olson, Sharon; Trudelle-Jackson, Elaine; Rosario, Martin; Venegas, Heidi L


    To compare, landing mechanics and electromyographic activity of the lower extremities during side hopping and crossover hopping maneuvers, in noninjured women and women with anterior cruciate ligament (ACL) reconstruction. A case-control study. A 3-dimensional motion analysis laboratory. Twenty-eight young women (range, 21-35 years) (15 control subjects and 13 subjects with ACL reconstruction). All participants performed a side-to-side hopping task that consisted of hopping single-legged 10 times consecutively from side to side across 2 lines marked 30 cm apart on 2 individual force plates. The task was designated as a side hopping when the hop was to the opposite side of the stance leg and as crossover hopping when the hop was toward the side of the stance leg. Peak hip-/knee-joint angles; peak knee extension/abduction joint moments; electromyographic studies of the gluteus maximus, gluteus medius, rectus femoris, and hamstring muscles; and quadriceps/hamstring co-contraction ratio were compared between the groups by means of 2 × 2 multivariate analysis of variance tests (group × maneuver). Noninjured women and women with ACL reconstruction exhibited similar hip- and knee-joint angles during both types of hopping. Hip-joint angles were greater during the crossover hopping in both groups, and knee-joint angles did not differ between the groups or hops. Knee-joint moments demonstrated a significant group × maneuver interaction. Greater knee extension and valgus moments were noted in the control group during crossover hopping, and greater knee abduction moments were noted in the ACL group during side hopping. Electromyographic data revealed no statistically significantly differences between the groups. Women with ACL reconstruction exhibited the restoration of functional biomechanical movements such as hip-/knee-joint angles and lower extremity neuromuscular activation during side-to-side athletic tasks. However, not all biomechanical strategies are restored years

  5. Let Me Blow Your Mind: Hip Hop Feminist Futures in Theory and Praxis (United States)

    Lindsey, Treva B.


    This essay brings together key theoretical interventions in hip-hop feminism to explore the continued, but undervalued, significance of hip-hop feminism in urban education. More specifically, the essay challenges narrow conceptualizations of the "hip hop subject" as Black and male by using hip-hop feminist theory to incorporate the lived…

  6. Characterization of hop pectins shows the presence of an arabinogalactan-protein

    NARCIS (Netherlands)

    Oosterveld, A.; Voragen, A.G.J.; Schols, H.A.


    Hop pectins were extracted from spent hops using acid extraction conditions and were characterized chemically. The acid extraction of spent hops resulted in a yield of 2°containing 59 f polysaccharides. The hop pectins under investigation had a relatively high molecular weight and an intrinsic

  7. Cardiac MRI in mice at 9.4 Tesla with a transmit-receive surface coil and a cardiac-tailored intensity-correction algorithm. (United States)

    Sosnovik, David E; Dai, Guangping; Nahrendorf, Matthias; Rosen, Bruce R; Seethamraju, Ravi


    To evaluate the use of a transmit-receive surface (TRS) coil and a cardiac-tailored intensity-correction algorithm for cardiac MRI in mice at 9.4 Tesla (9.4T). Fast low-angle shot (FLASH) cines, with and without delays alternating with nutations for tailored excitation (DANTE) tagging, were acquired in 13 mice. An intensity-correction algorithm was developed to compensate for the sensitivity profile of the surface coil, and was tailored to account for the unique distribution of noise and flow artifacts in cardiac MR images. Image quality was extremely high and allowed fine structures such as trabeculations, valve cusps, and coronary arteries to be clearly visualized. The tag lines created with the surface coil were also sharp and clearly visible. Application of the intensity-correction algorithm improved signal intensity, tissue contrast, and image quality even further. Importantly, the cardiac-tailored properties of the correction algorithm prevented noise and flow artifacts from being significantly amplified. The feasibility and value of cardiac MRI in mice with a TRS coil has been demonstrated. In addition, a cardiac-tailored intensity-correction algorithm has been developed and shown to improve image quality even further. The use of these techniques could produce significant potential benefits over a broad range of scanners, coil configurations, and field strengths. (c) 2007 Wiley-Liss, Inc.

  8. Holstein polarons and triplet bipolarons with NNN hopping (United States)

    Chakraborty, Monodeep; Taraphder, A.; Berciu, Mona


    We study the ground state of 1D Holstein single polaron with next nearest neighbour electron hopping (NNN), employing a variational approximation based on exact diagonalization. Our investigation reveals that, depending upon the sign and magnitude of the NNN hopping integral with respect to nearest neighbour hopping, the polaron band minima may occur at non-zero kGS. We compare the present scenario with the SSH polarons, where a similar feature is also observed, albeit, due to very different mechanism. Our initial investigation of triplet bipolarons, in presence of an attractive extended Hubbard interactions, further substantiates the differences between the present model and the SSH model.

  9. Performance Analysis of Millimeter-Wave Multi-hop Machine-to-Machine Networks Based on Hop Distance Statistics

    Directory of Open Access Journals (Sweden)

    Haejoon Jung


    Full Text Available As an intrinsic part of the Internet of Things (IoT ecosystem, machine-to-machine (M2M communications are expected to provide ubiquitous connectivity between machines. Millimeter-wave (mmWave communication is another promising technology for the future communication systems to alleviate the pressure of scarce spectrum resources. For this reason, in this paper, we consider multi-hop M2M communications, where a machine-type communication (MTC device with the limited transmit power relays to help other devices using mmWave. To be specific, we focus on hop distance statistics and their impacts on system performances in multi-hop wireless networks (MWNs with directional antenna arrays in mmWave for M2M communications. Different from microwave systems, in mmWave communications, wireless channel suffers from blockage by obstacles that heavily attenuate line-of-sight signals, which may result in limited per-hop progress in MWNs. We consider two routing strategies aiming at different types of applications and derive the probability distributions of their hop distances. Moreover, we provide their baseline statistics assuming the blockage-free scenario to quantify the impact of blockages. Based on the hop distance analysis, we propose a method to estimate the end-to-end performances (e.g., outage probability, hop count, and transmit energy of the mmWave MWNs, which provides important insights into mmWave MWN design without time-consuming and repetitive end-to-end simulation.

  10. Performance Analysis of Millimeter-Wave Multi-hop Machine-to-Machine Networks Based on Hop Distance Statistics. (United States)

    Jung, Haejoon; Lee, In-Ho


    As an intrinsic part of the Internet of Things (IoT) ecosystem, machine-to-machine (M2M) communications are expected to provide ubiquitous connectivity between machines. Millimeter-wave (mmWave) communication is another promising technology for the future communication systems to alleviate the pressure of scarce spectrum resources. For this reason, in this paper, we consider multi-hop M2M communications, where a machine-type communication (MTC) device with the limited transmit power relays to help other devices using mmWave. To be specific, we focus on hop distance statistics and their impacts on system performances in multi-hop wireless networks (MWNs) with directional antenna arrays in mmWave for M2M communications. Different from microwave systems, in mmWave communications, wireless channel suffers from blockage by obstacles that heavily attenuate line-of-sight signals, which may result in limited per-hop progress in MWNs. We consider two routing strategies aiming at different types of applications and derive the probability distributions of their hop distances. Moreover, we provide their baseline statistics assuming the blockage-free scenario to quantify the impact of blockages. Based on the hop distance analysis, we propose a method to estimate the end-to-end performances (e.g., outage probability, hop count, and transmit energy) of the mmWave MWNs, which provides important insights into mmWave MWN design without time-consuming and repetitive end-to-end simulation.

  11. Muscle-tendon units localization and activation level analysis based on high-density surface EMG array and NMF algorithm (United States)

    Huang, Chengjun; Chen, Xiang; Cao, Shuai; Zhang, Xu


    Objective. Some skeletal muscles can be subdivided into smaller segments called muscle-tendon units (MTUs). The purpose of this paper is to propose a framework to locate the active region of the corresponding MTUs within a single skeletal muscle and to analyze the activation level varieties of different MTUs during a dynamic motion task. Approach. Biceps brachii and gastrocnemius were selected as targeted muscles and three dynamic motion tasks were designed and studied. Eight healthy male subjects participated in the data collection experiments, and 128-channel surface electromyographic (sEMG) signals were collected with a high-density sEMG electrode grid (a grid consists of 8 rows and 16 columns). Then the sEMG envelopes matrix was factorized into a matrix of weighting vectors and a matrix of time-varying coefficients by nonnegative matrix factorization algorithm. Main results. The experimental results demonstrated that the weightings vectors, which represent invariant pattern of muscle activity across all channels, could be used to estimate the location of MTUs and the time-varying coefficients could be used to depict the variation of MTUs activation level during dynamic motion task. Significance. The proposed method provides one way to analyze in-depth the functional state of MTUs during dynamic tasks and thus can be employed on multiple noteworthy sEMG-based applications such as muscle force estimation, muscle fatigue research and the control of myoelectric prostheses. This work was supported by the National Nature Science Foundation of China under Grant 61431017 and 61271138.

  12. Hip hop jako kulturní styl, jeho spicifika a vliv na teenagery




    This thesis involves history of hip hop, its specifics and elements, it talks about influence of hip hip subculture on teenagers and points to positive and negative aspects connected to this culture style. In this way is work sectionalized into chapters. First part talks about history of hip hop, connection between religion and hip hop and also about Czech hip hop. Second part specifies on main elements of hip hop culture as DJing, MCing, breakdance, beatbox and graffiti. Last part focuses on...

  13. Treating primary insomnia - the efficacy of valerian and hops. (United States)

    Salter, Shanah; Brownie, Sonya


    To evaluate the efficacy of valerian and hops in the treatment of primary insomnia. The AMED and MEDLINE databases were searched for primary sources of literature published between 1950 and 2009, using keywords: herbal medicine, medicinal plants, herbal, Valeriana officinalis, valerian, Humulus lupulus, hops, sleep, insomnia. Studies were included if they evaluated the efficacy of valerian or hops in improving primary insomnia in adults: sixteen studies met the inclusion criteria. Twelve of these found that the use of valerian, on its own, or in combination with hops, is associated with improvements in some sleep parameters (eg. sleep latency and quality of sleep). However, these results need to be interpreted cautiously as there were significant differences in design between the studies. Further randomised, double blind, placebo controlled trials are needed before such herbal treatments can be confidently recommended for the treatment of primary insomnia.

  14. Hopping in a supercooled binary Lennard-Jones liquid

    DEFF Research Database (Denmark)

    Schrøder, Thomas; Dyre, Jeppe


    A binary Lennard–Jones liquid has been investigated by molecular dynamics at equilibrium supercooled conditions. At the lowest temperature investigated, hopping is present in the system as indicated by a secondary peak in 4r2Gs(r,t), where Gs(r,t) is the van Hove self correlation function......", as often argued, and that the system has a single-peaked distribution of hopping-distances centered around the characteristic intermolecular distance....

  15. Generalizing the Hop: Object-Level Programming for Legged Motion (United States)


    1989. 4. J. Hodgins, J. Koechling, and M. H. Raibert, "Running experiments with a planar biped ," in The 3rd International Symposium on Robotics ...controlling a hopping robot . The approach focuses on the interaction between the hopper and its surroundings at points of con- tact. It is only through...locomotion of legged robots . Walking, running, and hopping are distinguished from most conventional robot tasks in several respects. A stationary robot

  16. WDM Multicast Tree Construction Algorithms and Their Comparative Evaluations (United States)

    Makabe, Tsutomu; Mikoshi, Taiju; Takenaka, Toyofumi

    We propose novel tree construction algorithms for multicast communication in photonic networks. Since multicast communications consume many more link resources than unicast communications, effective algorithms for route selection and wavelength assignment are required. We propose a novel tree construction algorithm, called the Weighted Steiner Tree (WST) algorithm and a variation of the WST algorithm, called the Composite Weighted Steiner Tree (CWST) algorithm. Because these algorithms are based on the Steiner Tree algorithm, link resources among source and destination pairs tend to be commonly used and link utilization ratios are improved. Because of this, these algorithms can accept many more multicast requests than other multicast tree construction algorithms based on the Dijkstra algorithm. However, under certain delay constraints, the blocking characteristics of the proposed Weighted Steiner Tree algorithm deteriorate since some light paths between source and destinations use many hops and cannot satisfy the delay constraint. In order to adapt the approach to the delay-sensitive environments, we have devised the Composite Weighted Steiner Tree algorithm comprising the Weighted Steiner Tree algorithm and the Dijkstra algorithm for use in a delay constrained environment such as an IPTV application. In this paper, we also give the results of simulation experiments which demonstrate the superiority of the proposed Composite Weighted Steiner Tree algorithm compared with the Distributed Minimum Hop Tree (DMHT) algorithm, from the viewpoint of the light-tree request blocking.

  17. Extreme Kinematics in Selected Hip Hop Dance Sequences. (United States)

    Bronner, Shaw; Ojofeitimi, Sheyi; Woo, Helen


    Hip hop dance has many styles including breakdance (breaking), house, popping and locking, funk, streetdance, krumping, Memphis jookin', and voguing. These movements combine the complexity of dance choreography with the challenges of gymnastics and acrobatic movements. Despite high injury rates in hip hop dance, particularly in breakdance, to date there are no published biomechanical studies in this population. The purpose of this study was to compare representative hip hop steps found in breakdance (toprock and breaking) and house and provide descriptive statistics of the angular displacements that occurred in these sequences. Six expert female hip hop dancers performed three choreographed dance sequences, top rock, breaking, and house, to standardized music-based tempos. Hip, knee, and ankle kinematics were collected during sequences that were 18 to 30 sec long. Hip, knee, and ankle three-dimensional peak joint angles were compared in repeated measures ANOVAs with post hoc tests where appropriate (p<0.01). Peak angles of the breaking sequence, which included floorwork, exceeded the other two sequences in the majority of planes and joints. Hip hop maximal joint angles exceeded reported activities of daily living and high injury sports such as gymnastics. Hip hop dancers work at weight-bearing joint end ranges where muscles are at a functional disadvantage. These results may explain why lower extremity injury rates are high in this population.

  18. The Hip-Hop club scene: Gender, grinding and sex. (United States)

    Muñoz-Laboy, Miguel; Weinstein, Hannah; Parker, Richard


    Hip-Hop culture is a key social medium through which many young men and women from communities of colour in the USA construct their gender. In this study, we focused on the Hip-Hop club scene in New York City with the intention of unpacking narratives of gender dynamics from the perspective of young men and women, and how these relate to their sexual experiences. We conducted a three-year ethnographic study that included ethnographic observations of Hip-Hop clubs and their social scene, and in-depth interviews with young men and young women aged 15-21. This paper describes how young people negotiate gender relations on the dance floor of Hip-Hop clubs. The Hip-Hop club scene represents a context or setting where young men's masculinities are contested by the social environment, where women challenge hypermasculine privilege and where young people can set the stage for what happens next in their sexual and emotional interactions. Hip-Hop culture therefore provides a window into the gender and sexual scripts of many urban minority youth. A fuller understanding of these patterns can offer key insights into the social construction of sexual risk, as well as the possibilities for sexual health promotion, among young people in urban minority populations.

  19. Low Power Multi-Hop Networking Analysis in Intelligent Environments. (United States)

    Etxaniz, Josu; Aranguren, Gerardo


    Intelligent systems are driven by the latest technological advances in many different areas such as sensing, embedded systems, wireless communications or context recognition. This paper focuses on some of those areas. Concretely, the paper deals with wireless communications issues in embedded systems. More precisely, the paper combines the multi-hop networking with Bluetooth technology and a quality of service (QoS) metric, the latency. Bluetooth is a radio license-free worldwide communication standard that makes low power multi-hop wireless networking available. It establishes piconets (point-to-point and point-to-multipoint links) and scatternets (multi-hop networks). As a result, many Bluetooth nodes can be interconnected to set up ambient intelligent networks. Then, this paper presents the results of the investigation on multi-hop latency with park and sniff Bluetooth low power modes conducted over the hardware test bench previously implemented. In addition, the empirical models to estimate the latency of multi-hop communications over Bluetooth Asynchronous Connectionless Links (ACL) in park and sniff mode are given. The designers of devices and networks for intelligent systems will benefit from the estimation of the latency in Bluetooth multi-hop communications that the models provide.

  20. M-GCF: Multicolor-Green Conflict Free Scheduling Algorithm for WSN

    DEFF Research Database (Denmark)

    Pawar, Pranav M.; Nielsen, Rasmus Hjorth; Prasad, Neeli R.


    division multiple access (TDMA) scheduling algorithm, Multicolor-Green Conflict Free (M-GCF), for WSNs. The proposed algorithm finds multiple conflict free slots across a three-hop neighbor view. The algorithm shows better slot sharing with fewer conflicts along with good energy efficiency, throughput...

  1. The Impact of Globalization Process of Hip-Hop Music in Semarang as a Reflection of American Pop Culture (a Case Study of Semarang Hip-Hop Community)


    Alfian, Muhammad Rio


    Skripsi ini, berfokus pada analisis mengenai proses glokalisasi musik hip hop sebagai refleksi budaya pop Amerika di Indonesia. Studi kasus dari skripsi ini adalah komunitas musik hip hop di kota Semarang bernama “024 Streets”. Tujuan dari penelitian ini adalah untuk menunjukkan proses glokalisasi musik hip hop sebagai subkultur anak muda di Semarang. Penulis menggunakan metode kualitatif dari Chaterine Dawson untuk mengumpulkan data mengenai komunitas musik hip-hop (024 Streets) dan metode p...

  2. Application of the nonlinear time series prediction method of genetic algorithm for forecasting surface wind of point station in the South China Sea with scatterometer observations

    International Nuclear Information System (INIS)

    Zhong Jian; Dong Gang; Sun Yimei; Zhang Zhaoyang; Wu Yuqin


    The present work reports the development of nonlinear time series prediction method of genetic algorithm (GA) with singular spectrum analysis (SSA) for forecasting the surface wind of a point station in the South China Sea (SCS) with scatterometer observations. Before the nonlinear technique GA is used for forecasting the time series of surface wind, the SSA is applied to reduce the noise. The surface wind speed and surface wind components from scatterometer observations at three locations in the SCS have been used to develop and test the technique. The predictions have been compared with persistence forecasts in terms of root mean square error. The predicted surface wind with GA and SSA made up to four days (longer for some point station) in advance have been found to be significantly superior to those made by persistence model. This method can serve as a cost-effective alternate prediction technique for forecasting surface wind of a point station in the SCS basin. (paper)

  3. Energy-efficient two-hop LTE resource allocation in high speed trains with moving relays

    KAUST Repository

    Alsharoa, Ahmad M.


    High-speed railway system equipped with moving relay stations placed on the middle of the ceiling of each train wagon is investigated. The users inside the train are served in two hops via the 3GPP Long Term Evolution (LTE) technology. The objective of this work is to maximize the number of served users by respecting a specific quality-of-service constraint while minimizing the total power consumption of the eNodeB and the moving relays. We propose an efficient algorithm based on the Hungarian method to find the optimal resource allocation over the LTE resource blocks in order to serve the maximum number of users with the minimum power consumption. Moreover, we derive a closed-form expression for the power allocation problem. Our simulation results illustrate the performance of the proposed scheme and compare it with various previously developed algorithms as well as with the direct transmission scenario. © 2014 IFIP.

  4. Fast Hopping Frequency Generation in Digital CMOS

    CERN Document Server

    Farazian, Mohammad; Gudem, Prasad S


    Overcoming the agility limitations of conventional frequency synthesizers in multi-band OFDM ultra wideband is a key research goal in digital technology. This volume outlines a frequency plan that can generate all the required frequencies from a single fixed frequency, able to implement center frequencies with no more than two levels of SSB mixing. It recognizes the need for future synthesizers to bypass on-chip inductors and operate at low voltages to enable the increased integration and efficiency of networked appliances. The author examines in depth the architecture of the dividers that generate the necessary frequencies from a single base frequency and are capable of establishing a fractional division ratio.   Presenting the first CMOS inductorless single PLL 14-band frequency synthesizer for MB-OFDMUWB makes this volume a key addition to the literature, and with the synthesizer capable of arbitrary band-hopping in less than two nanoseconds, it operates well within the desired range on a 1.2-volt power s...

  5. Multi-Hop Teleportation of an Unknown Qubit State Based on W States (United States)

    Zhou, Xiang-Zhen; Yu, Xu-Tao; Zhang, Zai-Chen


    Quantum teleportation is important in quantum communication networks. Considering that quantum state information is also transmitted between two distant nodes, intermediated nodes are employed and two multi-hop teleportation protocols based on W state are proposed. One is hop-by-hop teleportation protocol and the other is the improved multi-hop teleportation protocol with centralized unitary transformation. In hop-by-hop protocol, the transmitted quantum state needs to be recovered at every node on the route. In improved multi-hop teleportation protocol with centralized unitary transformation, intermediate nodes need not to recover the transmitted quantum state. Compared to the hop-by-hop protocol, the improved protocol can reduce the transmission delay and improve the transmission efficiency.

  6. From "They" Science to "Our" Science: Hip Hop Epistemology in STEAM Education (United States)

    Dolberry, Maurice E.

    Hip hop has moved from being considered a type of music into being understood as a culture in which a prominent type of music originates. Hip hop culture has a philosophy and epistemological constructs as well. This study analyzed those constructs to determine how conceptions of science factor in hip hop worldviews. Pedagogical models in culturally responsive teaching and Science, Technology, Engineering, Arts, and Mathematics (STEAM) education were also examined to discern their philosophical connections with hip hop culture. These connections were used to create two theoretical models. The first one, Hip Hop Science, described how scientific thought functions in hip hop culture. The second model, Hip Hop STEAM Pedagogy, proposes how hip hop culture can inform STEAM teaching practices. The study began by using Critical Race Theory to create a theoretical framework proposing how the two theoretical models could be derived from the philosophical and pedagogical concepts. Content analysis and narrative inquiry were used to analyze data collected from scholarly texts, hip hop songs, and interviews with hip hop-responsive educators. The data from these sources were used initially to assess the adequacy of the proposed theoretical framework, and subsequently to improve its viability. Four overlapping themes emerged from the data analyses, including hip hop-resistance to formal education; how hip hop culture informs pedagogical practice in hip hop-responsive classrooms; conceptions of knowledge and reality that shape how hip hoppers conduct scientific inquiry; and hip hop-based philosophies of effective teaching for hip hoppers as a marginalized cultural group. The findings indicate that there are unique connections between hip hop epistemology, sciencemindedness, and pedagogical practices in STEAM education. The revised theoretical framework clarified the nature of these connections, and supported claims from prior research that hip hop culture provides viable sites of

  7. An algorithm for hyperspectral remote sensing of aerosols: 2. Information content analysis for aerosol parameters and principal components of surface spectra (United States)

    Hou, Weizhen; Wang, Jun; Xu, Xiaoguang; Reid, Jeffrey S.


    This paper describes the second part of a series of investigation to develop algorithms for simultaneous retrieval of aerosol parameters and surface reflectance from the future hyperspectral and geostationary satellite sensors such as Tropospheric Emissions: Monitoring of POllution (TEMPO). The information content in these hyperspectral measurements is analyzed for 6 principal components (PCs) of surface spectra and a total of 14 aerosol parameters that describe the columnar aerosol volume Vtotal, fine-mode aerosol volume fraction, and the size distribution and wavelength-dependent index of refraction in both coarse and fine mode aerosols. Forward simulations of atmospheric radiative transfer are conducted for 5 surface types (green vegetation, bare soil, rangeland, concrete and mixed surface case) and a wide range of aerosol mixtures. It is shown that the PCs of surface spectra in the atmospheric window channel could be derived from the top-of-the-atmosphere reflectance in the conditions of low aerosol optical depth (AOD ≤ 0.2 at 550 nm), with a relative error of 1%. With degree freedom for signal analysis and the sequential forward selection method, the common bands for different aerosol mixture types and surface types can be selected for aerosol retrieval. The first 20% of our selected bands accounts for more than 90% of information content for aerosols, and only 4 PCs are needed to reconstruct surface reflectance. However, the information content in these common bands from each TEMPO individual observation is insufficient for the simultaneous retrieval of surface's PC weight coefficients and multiple aerosol parameters (other than Vtotal). In contrast, with multiple observations for the same location from TEMPO in multiple consecutive days, 1-3 additional aerosol parameters could be retrieved. Consequently, a self-adjustable aerosol retrieval algorithm to account for surface types, AOD conditions, and multiple-consecutive observations is recommended to derive

  8. An Efficient Vector-Raster Overlay Algorithm for High-Accuracy and High-Efficiency Surface Area Calculations of Irregularly Shaped Land Use Patches

    Directory of Open Access Journals (Sweden)

    Peng Xie


    Full Text Available The Earth’s surface is uneven, and conventional area calculation methods are based on the assumption that the projection plane area can be obtained without considering the actual undulation of the Earth’s surface and by simplifying the Earth’s shape to be a standard ellipsoid. However, the true surface area is important for investigating and evaluating land resources. In this study, the authors propose a new method based on an efficient vector-raster overlay algorithm (VROA-based method to calculate the surface areas of irregularly shaped land use patches. In this method, a surface area raster file is first generated based on the raster-based digital elevation model (raster-based DEM. Then, a vector-raster overlay algorithm (VROA is used that considers the precise clipping of raster cells using the vector polygon boundary. Xiantao City, Luotian County, and the Shennongjia Forestry District, which are representative of a plain landform, a hilly topography, and a mountain landscape, respectively, are selected to calculate the surface area. Compared with a traditional method based on triangulated irregular networks (TIN-based method, our method significantly reduces the processing time. In addition, our method effectively improves the accuracy compared with another traditional method based on raster-based DEM (raster-based method. Therefore, the method satisfies the requirements of large-scale engineering applications.

  9. Comparison of Satellite Reflectance Algorithms for Estimating Phycocyanin Values and Cyanobacterial Total Biovolume in a Temperate Reservoir Using Coincident Hyperspectral Aircraft Imagery and Dense Coincident Surface Observations

    Directory of Open Access Journals (Sweden)

    Richard Beck


    Full Text Available We analyzed 27 established and new simple and therefore perhaps portable satellite phycocyanin pigment reflectance algorithms for estimating cyanobacterial values in a temperate 8.9 km2 reservoir in southwest Ohio using coincident hyperspectral aircraft imagery and dense coincident water surface observations collected from 44 sites within 1 h of image acquisition. The algorithms were adapted to real Compact Airborne Spectrographic Imager (CASI, synthetic WorldView-2, Sentinel-2, Landsat-8, MODIS and Sentinel-3/MERIS/OLCI imagery resulting in 184 variants and corresponding image products. Image products were compared to the cyanobacterial coincident surface observation measurements to identify groups of promising algorithms for operational algal bloom monitoring. Several of the algorithms were found useful for estimating phycocyanin values with each sensor type except MODIS in this small lake. In situ phycocyanin measurements correlated strongly (r2 = 0.757 with cyanobacterial sum of total biovolume (CSTB allowing us to estimate both phycocyanin values and CSTB for all of the satellites considered except MODIS in this situation.

  10. Mic Power? Connections and the hip hop nation in Kampala, Uganda

    DEFF Research Database (Denmark)

    Schneidermann, Nanna


    Hip hop culture has been celebrated in the media and scholarship as a universal youth language, part of a global hip hop nation, and a type of counter-public. This article examines the everyday meanings and practices of hip hop among hip hop activists in Kampala, Uganda, specifically within...... the Batuuze rap group. Rather than portraying hip hop as a counter-public of the disempowered, I argue that the Batuuze engagement is based on what I call moral economy that enables the negotiation of connections in social and cultural networks towards what is considered a good life. Here, the hip hop nation...

  11. DEMON-type algorithms for determination of hydro-acoustic signatures of surface ships and of divers (United States)

    Slamnoiu, G.; Radu, O.; Rosca, V.; Pascu, C.; Damian, R.; Surdu, G.; Curca, E.; Radulescu, A.


    With the project “System for detection, localization, tracking and identification of risk factors for strategic importance in littoral areas”, developed in the National Programme II, the members of the research consortium intend to develop a functional model for a hydroacoustic passive subsystem for determination of acoustic signatures of targets such as fast boats and autonomous divers. This paper presents some of the results obtained in the area of hydroacoustic signal processing by using DEMON-type algorithms (Detection of Envelope Modulation On Noise). For evaluation of the performance of various algorithm variations we have used both audio recordings of the underwater noise generated by ships and divers in real situations and also simulated noises. We have analysed the results of processing these signals using four DEMON algorithm structures as presented in the reference literature and a fifth DEMON algorithm structure proposed by the authors of this paper. The algorithm proposed by the authors generates similar results to those obtained by applying the traditional algorithms but requires less computing resources than those and at the same time it has proven to be more resilient to random noise influence.

  12. Cultivated grapevines represent a symptomless reservoir for the transmission of hop stunt viroid to hop crops: 15 years of evolutionary analysis.

    Directory of Open Access Journals (Sweden)

    Yoko Kawaguchi-Ito

    Full Text Available Hop stunt was a mysterious disorder that first emerged in the 1940s in commercial hops in Japan. To investigate the origin of this disorder, we infected hops with natural Hop stunt viroid (HpSVd isolates derived from four host species (hop, grapevine, plum and citrus, which except for hop represent possible sources of the ancestral viroid. These plants were maintained for 15 years, then analyzed the HpSVd variants present. Here we show that the variant originally found in cultivated grapevines gave rise to various combinations of mutations at positions 25, 26, 54, 193, and 281. However, upon prolonged infection, these variants underwent convergent evolution resulting in a limited number of adapted mutants. Some of them showed nucleotide sequences identical to those currently responsible for hop stunt epidemics in commercial hops in Japan, China, and the United States. Therefore, these results indicate that we have successfully reproduced the original process by which a natural HpSVd variant naturally introduced into cultivated hops was able to mutate into the HpSVd variants that are currently present in commercial hops. Furthermore, and importantly, we have identified cultivated grapevines as a symptomless reservoir in which HSVd can evolve and be transmitted to hop crops to cause epidemics.

  13. Hip Hop Dance Experience Linked to Sociocognitive Ability.

    Directory of Open Access Journals (Sweden)

    Justin W Bonny

    Full Text Available Expertise within gaming (e.g., chess, video games and kinesthetic (e.g., sports, classical dance activities has been found to be linked with specific cognitive skills. Some of these skills, working memory, mental rotation, problem solving, are linked to higher performance in science, technology, math, and engineering (STEM disciplines. In the present study, we examined whether experience in a different activity, hip hop dance, is also linked to cognitive abilities connected with STEM skills as well as social cognition ability. Dancers who varied in hip hop and other dance style experience were presented with a set of computerized tasks that assessed working memory capacity, mental rotation speed, problem solving efficiency, and theory of mind. We found that, when controlling for demographic factors and other dance style experience, those with greater hip hop dance experience were faster at mentally rotating images of hands at greater angle disparities and there was a trend for greater accuracy at identifying positive emotions displayed by cropped images of human faces. We suggest that hip hop dance, similar to other more technical activities such as video gameplay, tap some specific cognitive abilities that underlie STEM skills. Furthermore, we suggest that hip hop dance experience can be used to reach populations who may not otherwise be interested in other kinesthetic or gaming activities and potentially enhance select sociocognitive skills.

  14. Hip Hop Dance Experience Linked to Sociocognitive Ability. (United States)

    Bonny, Justin W; Lindberg, Jenna C; Pacampara, Marc C


    Expertise within gaming (e.g., chess, video games) and kinesthetic (e.g., sports, classical dance) activities has been found to be linked with specific cognitive skills. Some of these skills, working memory, mental rotation, problem solving, are linked to higher performance in science, technology, math, and engineering (STEM) disciplines. In the present study, we examined whether experience in a different activity, hip hop dance, is also linked to cognitive abilities connected with STEM skills as well as social cognition ability. Dancers who varied in hip hop and other dance style experience were presented with a set of computerized tasks that assessed working memory capacity, mental rotation speed, problem solving efficiency, and theory of mind. We found that, when controlling for demographic factors and other dance style experience, those with greater hip hop dance experience were faster at mentally rotating images of hands at greater angle disparities and there was a trend for greater accuracy at identifying positive emotions displayed by cropped images of human faces. We suggest that hip hop dance, similar to other more technical activities such as video gameplay, tap some specific cognitive abilities that underlie STEM skills. Furthermore, we suggest that hip hop dance experience can be used to reach populations who may not otherwise be interested in other kinesthetic or gaming activities and potentially enhance select sociocognitive skills.

  15. Particle trapping and hopping in an optofluidic fishnet (United States)

    Shi, Y. Z.; Xiong, S.; Zhang, Y.; Chin, L. K.; Wu, J. H.; Chen, T. N.; Liu, A. Q.


    Particle jumping between optical potentials has attracted much attention owing to its extensive involvement in many physical and biological experiments. In some circumstances, particle jumping indicates escaping from the optical trap, which is an issue people are trying to avoid. Nevertheless, particle jumping can facilitate the individual trap in each laser spot in the optical lattice and enable sorting and delivery of nanoparticles. Particle hopping has not been seen in fluid because Fluidic drag force dramatically reduce the dwell time of particle or break the potential well. Here, we observe particle hopping in the microchannel by three reasons, e.g., particle collision or aggregation, light disturbing by pretrapped particle and fake trapping position. We show that commonly ignored particle influence to the light could create a new isolated trapping position, where particle hops to the adjacent potential well. The hopping happens in an optofluidic fishnet which is comprised of discrete hotspots enabling 2D patterning of particles in the flow stream for the first time. We also achieve a 2D patterning of cryptosporidium in the microchannel. Our observed particle hopping in the flow stream completes the family of particle kinetics in potential wells and inspires new interests in the particle disturbed optical trapping. The 2D patterning of particles benefits the parallel study of biological samples in the flow stream and have potential on cell sorting and drug delivery.

  16. Effect of time sequences in scanning algorithms on the surface temperature during corneal laser surgery with high-repetition-rate excimer laser. (United States)

    Mrochen, Michael; Schelling, Urs; Wuellner, Christian; Donitzky, Christof


    To investigate the influence of temporal and spatial spot sequences on the ocular surface temperature increase during corneal laser surgery with a high-repetition-rate excimer laser. Institute for Refractive and Ophthalmic Surgery, Zurich, Switzerland, and WaveLight AG, Erlangen, Germany. An argon-fluoride excimer laser system working at a repetition rate of 1050 Hz was used to photoablate bovine corneas with various myopic, hyperopic, and phototherapeutic ablation profiles. The temporal distribution of ablation profiles was modified by 4 spot sequences: line, circumferential, random, and an optimized scan algorithm. The increase in ocular surface temperature was measured using an infrared camera. The maximum and mean ocular surface temperature increases depended primarily on the spatial and temporal distribution of the spots during photoablation and the amount of refractive correction. The highest temperature increases were with the line and circumferential scan sequences. Significant lower temperature increases were found with the optimized and random scan algorithms. High-repetition-rate excimer laser systems require spot sequences with optimized temporal and spatial spot distribution to minimize the increase in ocular surface temperature. An ocular surface temperature increase will always occur depending on the amount of refractive correction, the type of ablation profile, the radiant exposure, and the repetition rate of the laser system.

  17. An algorithm for gluinos on the lattice

    International Nuclear Information System (INIS)

    Montvay, I.


    Luescher's local bosonic algorithm for Monte Carlo simulations of quantum field theories with fermions is applied to the simulation of a possibly supersymmetric Yang-Mills theory with a Majorana fermion in the adjoint representation. Combined with a correction step in a two-step polynomial approximation scheme, the obtained algorithm seems to be promising and could be competitive with more conventional algorithms based on discretized classical (''molecular dynamics'') equations of motion. The application of the considered polynomial approximation scheme to optimized hopping parameter expansions is also discussed. (orig.)

  18. A Routing Strategy for Non-Cooperation Wireless Multi-Hop Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    Dung T. Tran


    Full Text Available Choosing routes such that the network lifetime is maximized in a wireless network with limited energy resources is a major routing problem in wireless multi-hop ad hoc networks. In this paper, we study the problem where participants are rationally selfish and non-cooperative. By selfish we designate the users who are ready to tamper with their source-routing (senders could choose intermediate nodes in the routing paths or next hop selection strategies in order to increase the total number of packets transmitted, but do not try to harm or drop packets of the other nodes. The problem therefore amounts to a non-cooperative game. In the works [2,6,19,23], the authors show that the game admits Nash equilibria [1]. Along this line, we first show that if the cost function is linear, this game has pure-strategy equilibrium flow even though participants have different demands. However, finding a Nash equilibrium for a normal game is computationally hard [9]. In this work, inspired by mixed-strategy equilibrium, we propose a simple local routing algorithm called MIxed Path Routing protocol (MiPR. Using analysis and simulations, we show that MiPR drives the system to an equilibrium state where selfish participants do not have incentive to deviate. Moreover, MiPR significantly improves the network lifetime as compared to original routing protocols.

  19. Parallel deposition, sorting, and reordering methods in the Hybrid Ordered Plasma Simulation (HOPS) code

    International Nuclear Information System (INIS)

    Anderson, D.V.; Shumaker, D.E.


    From a computational standpoint, particle simulation calculations for plasmas have not adapted well to the transitions from scalar to vector processing nor from serial to parallel environments. They have suffered from inordinate and excessive accessing of computer memory and have been hobbled by relatively inefficient gather-scatter constructs resulting from the use of indirect indexing. Lastly, the many-to-one mapping characteristic of the deposition phase has made it difficult to perform this in parallel. The authors' code sorts and reorders the particles in a spatial order. This allows them to greatly reduce the memory references, to run in directly indexed vector mode, and to employ domain decomposition to achieve parallelization. In this hybrid simulation the electrons are modeled as a fluid and the field equations solved are obtained from the electron momentum equation together with the pre-Maxwell equations (displacement current neglected). Either zero or finite electron mass can be used in the electron model. The resulting field equations are solved with an iteratively explicit procedure which is thus trivial to parallelize. Likewise, the field interpolations and the particle pushing is simple to parallelize. The deposition, sorting, and reordering phases are less simple and it is for these that the authors present detailed algorithms. They have now successfully tested the parallel version of HOPS in serial mode and it is now being readied for parallel execution on the Cray C-90. They will then port HOPS to a massively parallel computer, in the next year

  20. Optimal number and location of heaters in 2-D radiant enclosures composed of specular and diffuse surfaces using micro-genetic algorithm

    International Nuclear Information System (INIS)

    Safavinejad, A.; Mansouri, S.H.; Sakurai, A.; Maruyama, S.


    In this study, a combinatorial optimization methodology has been presented for determining the optimal number and location of equally powered heaters over some parts of the boundary, called the heater surface, to satisfy the desired heat flux and temperature profiles over the design surface while keeping the total heaters power constant but floating the number of heaters. In a typical enclosure, candidate locations were numerous for placing the heaters. The optimal number and location could be found by checking among all the possible combinations of heater power ranges and locations on the heater surface. The possibility of checking only a small portion of the total search space was increasingly desirable for finding an overall optimal solution. Micro-genetic algorithm was a candidate method which displayed a significant potential in achieving that task. Micro-genetic algorithm was used to minimize an objective function which was expressed by the sum of square errors between estimated and desired heat fluxes on the design surface. Radiation element method by ray emission model (REM 2 ) was used to calculate the radiative heat flux on the design surface. It enabled us to handle the effects of specular surfaces and blockage radiation due to enclosure geometry. The capabilities of this methodology were demonstrated by finding the optimal number and position of heaters in two irregular enclosures. The effects of refractory surface characteristics (i.e., diffuse and/or specular) on the optimal solution have been studied in detail. The results show that the refractory surface characteristics have profound effects on the optimal number and location of heaters

  1. High colored dissolved organic matter (CDOM) absorption in surface waters of the central-eastern Arctic Ocean: Implications for biogeochemistry and ocean color algorithms. (United States)

    Gonçalves-Araujo, Rafael; Rabe, Benjamin; Peeken, Ilka; Bracher, Astrid


    As consequences of global warming sea-ice shrinking, permafrost thawing and changes in fresh water and terrestrial material export have already been reported in the Arctic environment. These processes impact light penetration and primary production. To reach a better understanding of the current status and to provide accurate forecasts Arctic biogeochemical and physical parameters need to be extensively monitored. In this sense, bio-optical properties are useful to be measured due to the applicability of optical instrumentation to autonomous platforms, including satellites. This study characterizes the non-water absorbers and their coupling to hydrographic conditions in the poorly sampled surface waters of the central and eastern Arctic Ocean. Over the entire sampled area colored dissolved organic matter (CDOM) dominates the light absorption in surface waters. The distribution of CDOM, phytoplankton and non-algal particles absorption reproduces the hydrographic variability in this region of the Arctic Ocean which suggests a subdivision into five major bio-optical provinces: Laptev Sea Shelf, Laptev Sea, Central Arctic/Transpolar Drift, Beaufort Gyre and Eurasian/Nansen Basin. Evaluating ocean color algorithms commonly applied in the Arctic Ocean shows that global and regionally tuned empirical algorithms provide poor chlorophyll-a (Chl-a) estimates. The semi-analytical algorithms Generalized Inherent Optical Property model (GIOP) and Garver-Siegel-Maritorena (GSM), on the other hand, provide robust estimates of Chl-a and absorption of colored matter. Applying GSM with modifications proposed for the western Arctic Ocean produced reliable information on the absorption by colored matter, and specifically by CDOM. These findings highlight that only semi-analytical ocean color algorithms are able to identify with low uncertainty the distribution of the different optical water constituents in these high CDOM absorbing waters. In addition, a clustering of the Arctic Ocean

  2. Switched diversity strategies for dual-hop relaying systems

    KAUST Repository

    Gaaloul, Fakhreddine


    This paper investigates the effect of different switched diversity configurations on the implementation complexity and achieved performance of dual-hop amplify-and-forward (AF) relaying networks. A low-complexity model of the relay station is adopted, wherein single-input single-output antenna configuration is employed. Each of the transmitter and the receiver however employs multiple antennas to improve the overall link performance. Single-phase and two-phase based receive switching strategies are investigated assuming optimum first hop signal-to-noise ratio (SNR). Moreover, the simple scheme in which the switched diversity is applied independently over the two hops is studied using tight upper bounds. Thorough performance comparisons and switching thresholds optimization for the aforementioned strategies are presented. Simulation results are also provided to validate the mathematical development and to verify the numerical computations.

  3. Comparison of Rheological Properties of Hopped Wort and Malt Wort

    Directory of Open Access Journals (Sweden)

    Petr Trávníček


    Full Text Available The aim of this work is determination rheological properties of hopped wort and malt wort and their comparison. In the paper following rheological properties has been described: the dependence of viscosity on a temperature of a sample and hysteresis loop test. The time dependence test was performed for a confirmation thixotropic behaviour. Based on measured values Arrhenius mathematical model has been applied. The activation energy was determined by using of this model. Tests have been carried out in the temperature range from 5 °C to 40 °C. Rheological tests proved that malt wort behaves as Newtonian fluid in all temperatures and hopped wort behaves as non-Newtonian fluid at low temperatures. Thixotropic behaviour is caused by the content of the rests of hops heads or malt scraps.

  4. Hopping magnetotransport via nonzero orbital momentum states and organic magnetoresistance. (United States)

    Alexandrov, Alexandre S; Dediu, Valentin A; Kabanov, Victor V


    In hopping magnetoresistance of doped insulators, an applied magnetic field shrinks the electron (hole) s-wave function of a donor or an acceptor and this reduces the overlap between hopping sites resulting in the positive magnetoresistance quadratic in a weak magnetic field, B. We extend the theory of hopping magnetoresistance to states with nonzero orbital momenta. Different from s states, a weak magnetic field expands the electron (hole) wave functions with positive magnetic quantum numbers, m>0, and shrinks the states with negative m in a wide region outside the point defect. This together with a magnetic-field dependence of injection/ionization rates results in a negative weak-field magnetoresistance, which is linear in B when the orbital degeneracy is lifted. The theory provides a possible explanation of a large low-field magnetoresistance in disordered π-conjugated organic materials.

  5. The structure of reconstructed chalcopyrite surfaces (United States)

    Thinius, Sascha; Islam, Mazharul M.; Bredow, Thomas


    Chalcopyrite (CuFeS2) surfaces are of major interest for copper exploitation in aqueous solution, called leaching. Since leaching is a surface process knowledge of the surface structure, bonding pattern and oxidation states is important for improving the efficiency. At present such information is not available from experimental studies. Therefore a detailed computational study of chalcopyrite surfaces is performed. The structures of low-index stoichiometric chalcopyrite surfaces {hkl} h, k, l ∈ {0, 1, 2} have been studied with density functional theory (DFT) and global optimization strategies. We have applied ab initio molecular dynamics (MD) in combination with simulated annealing (SA) in order to explore possible reconstructions via a minima hopping (MH) algorithm. In almost all cases reconstruction involving substantial rearrangement has occurred accompanied by reduction of the surface energy. The analysis of the change in the coordination sphere and migration during reconstruction reveals that S-S dimers are formed on the surface. Further it was observed that metal atoms near the surface move toward the bulk forming metal alloys passivated by sulfur. The obtained surface energies of reconstructed surfaces are in the range of 0.53-0.95 J/m2.

  6. Variable range hopping conduction and microstructure properties of semiconducting Co-doped TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Okutan, Mustafa [Department of Physics, Gebze Institute of Technology, 41400 Gebze (Turkey)]. E-mail:; Bakan, Halil I. [TUBITAK-MAM, Materials and Chemical Research Institute, 41470 Gebze (Turkey); Korkmaz, Kemal [Department of Material Science and Engineering, Gebze Institute of Technology, 41400 Gebze (Turkey); Yakuphanoglu, Fahrettin [Department of Physics, Faculty of Arts and Science, Firat University, 23169 Elazig (Turkey)


    The surface morphology, phases existing in the microstructure and conductivity behavior of Co-doped TiO2 have been investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), electrical conductivity measurements and X-ray diffraction technique. The semiconducting phase is found to obey Mott's variable range hopping mechanism of the conduction. The conduction mechanism of the ceramic shows a crossover from the, exp[-(T0/T)1/4] law to a simply activated law, exp(-{delta}E/kT). This behavior is attributed to temperature-induced transition from 3D to thermally activated behavior. The hopping conduction parameters such as the characteristic temperature (T0), localization length ({alpha}), hopping distance (R), activation energy ({delta}E) and density of states at Fermi level (N(EF) have been calculated. Surface morphology shows that the ceramic has a regular surface. The SEM study indicates that there are grains which have a certain type in the microstructure. Rutile phases with different plane in microstructure were found.

  7. A novel algorithm for delineating wetland depressions and mapping surface hydrologic flow pathways using LiDAR data (United States)

    In traditional watershed delineation and topographic modeling, surface depressions are generally treated as spurious features and simply removed from a digital elevation model (DEM) to enforce flow continuity of water across the topographic surface to the watershed outlets. In re...

  8. Feedback Reduction in Broadcast and two Hop Multiuser Networks: A Compressed Sensing Approach

    KAUST Repository

    Shibli, Hussain J.


    In multiuser wireless networks, the base stations (BSs) rely on the channel state information (CSI) of the users to in order to perform user scheduling and downlink transmission. While the downlink channels can be easily estimated at all user terminals via a single broadcast, several key challenges are faced during uplink (feedback) transmission. Firstly, the noisy and fading feedback channels are usually unknown at the base station, and therefore, channel training is usually required from all users. Secondly, the amount of air-time required for feedback transmission grows linearly with the number of users. This domination of the network resources by feedback information leads to increased scheduling delay and outdated CSI at the BS. In this thesis, we tackle the above challenges and propose feedback reduction algorithms based on the theory of compressive sensing (CS). The proposed algorithms encompass both single and dual hop wireless networks, and; i) permit the BS to obtain CSI with acceptable recovery guarantees under substantially reduced feedback overhead, ii) are agnostic to the statistics of the feedback channels, and iii) utilize the apriori statistics of the additive noise to identify strong users. Numerical results show that the proposed algorithms are able to reduce the feedback overhead, improve detection at the BS, and achieve a sum-rate close to that obtained by noiseless dedicated feedback algorithms.

  9. Starting with Style: Toward a Second Wave of Hip-Hop Education Research and Practice (United States)

    Petchauer, Emery


    One fundamental breakthrough in the field of hip-hop education in recent years is the shift from understanding hip-hop solely as content to understanding hip-hop also as aesthetic form. In this article, I chart the roots of this shift across disciplines and focus on what it might mean for the future of hip-hop education, pedagogy, and research in…

  10. Calculating all local minima on liquidus surfaces using the FactSage software and databases and the Mesh Adaptive Direct Search algorithm

    International Nuclear Information System (INIS)

    Gheribi, Aimen E.; Robelin, Christian; Digabel, Sebastien Le; Audet, Charles; Pelton, Arthur D.


    Highlights: → Systematic search of low melting temperatures in multicomponent systems. → Calculation of eutectic in multicomponent systems. → The FactSage software and the direct search algorithm are used simultaneously. - Abstract: It is often of interest, for a multicomponent system, to identify the low melting compositions at which local minima of the liquidus surface occur. The experimental determination of these minima can be very time-consuming. An alternative is to employ the CALPHAD approach using evaluated thermodynamic databases containing optimized model parameters giving the thermodynamic properties of all phases as functions of composition and temperature. Liquidus temperatures are then calculated by Gibbs free energy minimization algorithms which access the databases. Several such large databases for many multicomponent systems have been developed over the last 40 years, and calculated liquidus temperatures are generally quite accurate. In principle, one could then search for local liquidus minima by simply calculating liquidus temperatures over a compositional grid. In practice, such an approach is prohibitively time-consuming for all but the simplest systems since the required number of grid points is extremely large. In the present article, the FactSage database computing system is coupled with the powerful Mesh Adaptive Direct Search (MADS) algorithm in order to search for and calculate automatically all liquidus minima in a multicomponent system. Sample calculations for a 4-component oxide system, a 7-component chloride system, and a 9-component ferrous alloy system are presented. It is shown that the algorithm is robust and rapid.

  11. Sensitivity of Global Sea-Air CO2 Flux to Gas Transfer Algorithms, Climatological Wind Speeds, and Variability of Sea Surface Temperature and Salinity (United States)

    McClain, Charles R.; Signorini, Sergio


    Sensitivity analyses of sea-air CO2 flux to gas transfer algorithms, climatological wind speeds, sea surface temperatures (SST) and salinity (SSS) were conducted for the global oceans and selected regional domains. Large uncertainties in the global sea-air flux estimates are identified due to different gas transfer algorithms, global climatological wind speeds, and seasonal SST and SSS data. The global sea-air flux ranges from -0.57 to -2.27 Gt/yr, depending on the combination of gas transfer algorithms and global climatological wind speeds used. Different combinations of SST and SSS global fields resulted in changes as large as 35% on the oceans global sea-air flux. An error as small as plus or minus 0.2 in SSS translates into a plus or minus 43% deviation on the mean global CO2 flux. This result emphasizes the need for highly accurate satellite SSS observations for the development of remote sensing sea-air flux algorithms.

  12. Upper Crustal Shear Structure of NE Wyoming Inverted by Regional Surface Waves From Mining Explosions-Comparison of Niching Genetic Algorithms and Least-Squares Inversion (United States)

    Zhou, R.; Stump, B. W.


    Surface-wave dispersion analysis of regional seismograms from mining explosion is used to extract shallow subsurface structural models. Seismograms along a number of azimuths were recorded at near-regional distances from mining explosions in Northeast Wyoming. The group velocities of fundamental mode Rayleigh wave were determined by using the Multiple Filter Analysis (MFA) and refined by Phase Matched Filtering (PMF) technique. The surface wave dispersion curves covered the period range of 2 to 12 sec and the group-velocities range from 1.3 to 2.9 km/sec. Besides least-squares inversion, a niching genetic algorithm (NGA) was introduced for crustal shear-wave velocity inversion. Niching methods are techniques specifically to maintain diversity and promote the formation and maintenance of stable sub-populations in the tradition genetic algorithm. This methodology identifies multiple candidate solutions when applied to both multimodal optimization and classification problems. Considering the nonuniqueness of inversion problem, the capacity of NGA is explored to retrieve classes of S-wave velocity structural profiles from the dispersion curves. Synthetic tests illustrate the range of nonuniqueness in linear surface wave inversion problems. Application of this new technique to regional surface wave observations from the Powder River Basin provides classes of models from which the one that is most consistent with geologic constraints can be chosen.

  13. Suppression of Plant Immune Responses by the Pseudomonas savastanoi pv. savastanoi NCPPB 3335 Type III Effector Tyrosine Phosphatases HopAO1 and HopAO2

    Directory of Open Access Journals (Sweden)

    María Pilar Castañeda-Ojeda


    Full Text Available The effector repertoire of the olive pathogen P. savastanoi pv. savastanoi NCPPB 3335 includes two members of the HopAO effector family, one of the most diverse T3E families of the P. syringae complex. The study described here explores the phylogeny of these dissimilar members, HopAO1 and HopAO2, among the complex and reveals their activities as immune defense suppressors. Although HopAO1 is predominantly encoded by phylogroup 3 strains isolated from woody organs of woody hosts, both HopAO1 and HopAO2 are phylogenetically clustered according to the woody/herbaceous nature of their host of isolation, suggesting host specialization of the HopAO family across the P. syringae complex. HopAO1 and HopAO2 translocate into plant cells and show hrpL-dependent expression, which allows their classification as actively deployed type III effectors. Our data also show that HopAO1 and HopAO2 possess phosphatase activity, a hallmark of the members of this family. Both of them exert an inhibitory effect on early plant defense responses, such as ROS production and callose deposition, and are able to suppress ETI responses induced by the effectorless polymutant of P. syringae pv. tomato DC3000 (DC3000D28E in Nicotiana. Moreover, we demonstrate that a ΔhopAO1 mutant of P. savastanoi NCPBB 3335 exhibits a reduced fitness and virulence in olive plants, which supports the relevance of this effector during the interaction of this strain with its host plants. This work contributes to the field with the first report regarding functional analysis of HopAO homologs encoded by P. syringae or P. savastanoi strains isolated from woody hosts.

  14. Suppression of Plant Immune Responses by the Pseudomonas savastanoi pv. savastanoi NCPPB 3335 Type III Effector Tyrosine Phosphatases HopAO1 and HopAO2 (United States)

    Castañeda-Ojeda, María Pilar; Moreno-Pérez, Alba; Ramos, Cayo; López-Solanilla, Emilia


    The effector repertoire of the olive pathogen P. savastanoi pv. savastanoi NCPPB 3335 includes two members of the HopAO effector family, one of the most diverse T3E families of the P. syringae complex. The study described here explores the phylogeny of these dissimilar members, HopAO1 and HopAO2, among the complex and reveals their activities as immune defense suppressors. Although HopAO1 is predominantly encoded by phylogroup 3 strains isolated from woody organs of woody hosts, both HopAO1 and HopAO2 are phylogenetically clustered according to the woody/herbaceous nature of their host of isolation, suggesting host specialization of the HopAO family across the P. syringae complex. HopAO1 and HopAO2 translocate into plant cells and show hrpL-dependent expression, which allows their classification as actively deployed type III effectors. Our data also show that HopAO1 and HopAO2 possess phosphatase activity, a hallmark of the members of this family. Both of them exert an inhibitory effect on early plant defense responses, such as ROS production and callose deposition, and are able to suppress ETI responses induced by the effectorless polymutant of P. syringae pv. tomato DC3000 (DC3000D28E) in Nicotiana. Moreover, we demonstrate that a ΔhopAO1 mutant of P. savastanoi NCPBB 3335 exhibits a reduced fitness and virulence in olive plants, which supports the relevance of this effector during the interaction of this strain with its host plants. This work contributes to the field with the first report regarding functional analysis of HopAO homologs encoded by P. syringae or P. savastanoi strains isolated from woody hosts. PMID:28529516

  15. Improved Methodology for Surface and Atmospheric Soundings, Error Estimates, and Quality Control Procedures: the AIRS Science Team Version-6 Retrieval Algorithm (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena


    The AIRS Science Team Version-6 AIRS/AMSU retrieval algorithm is now operational at the Goddard DISC. AIRS Version-6 level-2 products are generated near real-time at the Goddard DISC and all level-2 and level-3 products are available starting from September 2002. This paper describes some of the significant improvements in retrieval methodology contained in the Version-6 retrieval algorithm compared to that previously used in Version-5. In particular, the AIRS Science Team made major improvements with regard to the algorithms used to 1) derive surface skin temperature and surface spectral emissivity; 2) generate the initial state used to start the cloud clearing and retrieval procedures; and 3) derive error estimates and use them for Quality Control. Significant improvements have also been made in the generation of cloud parameters. In addition to the basic AIRS/AMSU mode, Version-6 also operates in an AIRS Only (AO) mode which produces results almost as good as those of the full AIRS/AMSU mode. This paper also demonstrates the improvements of some AIRS Version-6 and Version-6 AO products compared to those obtained using Version-5.

  16. Flipping the Misogynist Script: Gender, Agency, Hip Hop and Music Education (United States)

    Tobias, Evan S.


    Excluding Hip Hop culture and rap music from music education misses opportunities for addressing key aspects of popular culture, society, and students' lives. This article addresses intersections of Hip Hop, gender, and music education to forward potential Hip Hop praxis. After tracing related scholarship, I discuss and problematize…

  17. Post-Menopausal Vaginal Hemorrhage Related to the Use of a Hop-Containing Phytotherapeutic Product

    NARCIS (Netherlands)

    van Hunsel, Florence; van de Koppel, Sonja; van Puijenbroek, Eugène


    Two 54-year-old women developed abdominal cramps and vaginal hemorrhage as a result of endometrial hyperplasia during treatment with a hop-containing phytotherapeutic product (MenoCool®) for post-menopausal complaints. The women used the hop-containing phytotherapeutic product (418 mg of hop per

  18. Beats, Rhymes, and Classroom Life: Hip-Hop Pedagogy and the Politics of Identity (United States)

    Hill, Marc Lamont


    For over a decade, educators have looked to capitalize on the appeal of hip-hop culture, sampling its language, techniques, and styles as a way of reaching out to students. But beyond a fashionable hipness, what does hip-hop have to offer our schools? In this revelatory new book, Marc Lamont Hill shows how a serious engagement with hip-hop culture…

  19. Wish to Live: The Hip-Hop Feminism Pedagogy Reader. Educational Psychology. Volume 3 (United States)

    Brown, Ruth Nicole, Ed.; Kwakye, Chamara Jewel, Ed.


    "Wish To Live: The Hip-hop Feminism Pedagogy Reader" moves beyond the traditional understanding of the four elements of hip-hop culture--rapping, breakdancing, graffiti art, and deejaying--to articulate how hip-hop feminist scholarship can inform educational practices and spark, transform, encourage, and sustain local and global youth…

  20. "Deeper than Rap": Gifted Males and Their Relationship with Hip Hop Culture (United States)

    Callahan, J. Sean; Grantham, Tarek C.


    One would be hard-pressed to deny the impact that hip hop is having on gifted students. More specifically, because hip hop is a creative and exciting male-dominated culture, gifted males gravitate to hip hop culture. From the perspective of two Black men from two different generations, this article was inspired by discussions about the role of hip…

  1. Behind Beats and Rhymes: Working Class from a Hampton Roads Hip Hop Homeplace (United States)

    Durham, Aisha S.


    The film documentary titled "Hip Hop: beyond beats and rhymes" captures ongoing conversations among scholars, cultural critics, and hip hop insiders about the state of African Americans by interrogating distinct expressive forms associated with hip hop culture. Durham draws from two scenes to describe her memories as the researched…

  2. The Influence of European and American Wild Germplasm in Hop Cultivars (United States)

    Microsatellite variation at the nuclear and chloroplast genomes was evaluated for wild European and wild American hops, in order to assess the genetic diversity and origin of cultivated hops. Seven nuclear loci and 32 chloroplast loci were used in the analysis of 182 hop accessions including wild Eu...

  3. Adjusting Sensing Range to Maximize Throughput on Ad-Hoc Multi-Hop Wireless Networks

    National Research Council Canada - National Science Library

    Roberts, Christopher


    .... Such a network is referred to as a multi-hop ad-hoc network, or simply a multi-hop network. Most multi-hop network protocols use some form of carrier sensing to determine if the wireless channel is in use...

  4. First report of hop stunt viroid from sweet cherry with dapple apple fruit symptoms in China (United States)

    Hop stunt viroid (HSVd), the type member of the genus Hostuviroid, family Pospiviroidae, was first described from hops with stunt disease in Japan. HSVd has a wide host range that includes hop, cucumber, citrus, grapevine, plum, pear, peach, apricot and almond and is the causal agent of serious dis...

  5. Energy management that generates terrain following versus apex-preserving hopping in man and machine. (United States)

    Kalveram, Karl Theodor; Haeufle, Daniel F B; Seyfarth, André; Grimmer, Sten


    While hopping, 12 subjects experienced a sudden step down of 5 or 10 cm. Results revealed that the hopping style was "terrain following". It means that the subjects pursued to keep the distance between maximum hopping height (apex) and ground profile constant. The spring-loaded inverse pendulum (SLIP) model, however, which is currently considered as template for stable legged locomotion would predict apex-preserving hopping, by which the absolute maximal hopping height is kept constant regardless of changes of the ground level. To get more insight into the physics of hopping, we outlined two concepts of energy management: "constant energy supply", by which in each bounce--regardless of perturbations--the same amount of mechanical energy is injected, and "lost energy supply", by which the mechanical energy that is going to be dissipated in the current cycle is assessed and replenished. When tested by simulations and on a robot testbed capable of hopping, constant energy supply generated stable and robust terrain following hopping, whereas lost energy supply led to something like apex-preserving hopping, which, however, lacks stability as well as robustness. Comparing simulated and machine hopping with human hopping suggests that constant energy supply has a good chance to be used by humans to generate hopping.

  6. One Kind of Routing Algorithm Modified in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Wei Ni Ni


    Full Text Available The wireless sensor networks are the emerging next generation sensor networks, Routing technology is the wireless sensor network communication layer of the core technology. To build reliable paths in wireless sensor networks, we can consider two ways: providing multiple paths utilizing the redundancy to assure the communication reliability or constructing transmission reliability mechanism to assure the reliability of every hop. Braid multipath algorithm and ReInforM routing algorithm are the realizations of these two mechanisms. After the analysis of these two algorithms, this paper proposes a ReInforM routing algorithm based braid multipath routing algorithm.

  7. 4 HOMEBOYS : Hip hop -musiikin korukulttuuri ja kulttuurihistoria & suomalainen hip hop -genre korumuotoilun kohderyhmänä


    Joki, Eini


    Käsittelen opinnäytetyössäni hip hopin korukulttuuria sekä globaalisti että Suomen mittakaavassa. Tutkimuksellisempi puoli käsittelee suomalaisen hip hopin historiaa, arvopohjaa ja korunkäyttöä. Halusin luoda korun suomalaiselle hip hop -skenelle ja -käyttäjälle. Kirjallisen osion ja kuva-aineiston kautta käsittelin hip hopin kulttuurihistoriaa, korukulttuuria ja bling bling -ilmiötä. Tarkastelin myös hieman suomalaisen hip hop -skenen korunkulttuuria ja korumarkkinoita. Lopuksi tein ...

  8. A hop count based heuristic routing protocol for mobile delay tolerant networks. (United States)

    You, Lei; Li, Jianbo; Wei, Changjiang; Dai, Chenqu; Xu, Jixing; Hu, Lejuan


    Routing in delay tolerant networks (DTNs) is a challenge since it must handle network partitioning, long delays, and dynamic topology. Meanwhile, routing protocols of the traditional mobile ad hoc networks (MANETs) cannot work well due to the failure of its assumption that most network connections are available. In this paper, we propose a hop count based heuristic routing protocol by utilizing the information carried by the peripatetic packets in the network. A heuristic function is defined to help in making the routing decision. We formally define a custom operation for square matrices so as to transform the heuristic value calculation into matrix manipulation. Finally, the performance of our proposed algorithm is evaluated by the simulation results, which show the advantage of such self-adaptive routing protocol in the diverse circumstance of DTNs.

  9. Algorithming the Algorithm

    DEFF Research Database (Denmark)

    Mahnke, Martina; Uprichard, Emma


    changes: it’s not the ocean, it’s the internet we’re talking about, and it’s not a TV show producer, but algorithms that constitute a sort of invisible wall. Building on this assumption, most research is trying to ‘tame the algorithmic tiger’. While this is a valuable and often inspiring approach, we...

  10. Atomistic modeling of metal surfaces under electric fields: direct coupling of electric fields to a molecular dynamics algorithm

    CERN Document Server

    Djurabekova, Flyura; Pohjonen, Aarne; Nordlund, Kai


    The effect of electric fields on metal surfaces is fairly well studied, resulting in numerous analytical models developed to understand the mechanisms of ionization of surface atoms observed at very high electric fields, as well as the general behavior of a metal surface in this condition. However, the derivation of analytical models does not include explicitly the structural properties of metals, missing the link between the instantaneous effects owing to the applied field and the consequent response observed in the metal surface as a result of an extended application of an electric field. In the present work, we have developed a concurrent electrodynamic–molecular dynamic model for the dynamical simulation of an electric-field effect and subsequent modification of a metal surface in the framework of an atomistic molecular dynamics (MD) approach. The partial charge induced on the surface atoms by the electric field is assessed by applying the classical Gauss law. The electric forces acting on the partially...

  11. Range and energetics of charge hopping in organic semiconductors (United States)

    Abdalla, Hassan; Zuo, Guangzheng; Kemerink, Martijn


    The recent upswing in attention for the thermoelectric properties of organic semiconductors (OSCs) adds urgency to the need for a quantitative description of the range and energetics of hopping transport in organic semiconductors under relevant circumstances, i.e., around room temperature (RT). In particular, the degree to which hops beyond the nearest neighbor must be accounted for at RT is still largely unknown. Here, measurements of charge and energy transport in doped OSCs are combined with analytical modeling to reach the univocal conclusion that variable-range hopping is the proper description in a large class of disordered OSC at RT. To obtain quantitative agreement with experiment, one needs to account for the modification of the density of states by ionized dopants. These Coulomb interactions give rise to a deep tail of trap states that is independent of the material's initial energetic disorder. Insertion of this effect into a classical Mott-type variable-range hopping model allows one to give a quantitative description of temperature-dependent conductivity and thermopower measurements on a wide range of disordered OSCs. In particular, the model explains the commonly observed quasiuniversal power-law relation between the Seebeck coefficient and the conductivity.

  12. Crossing the Lexicon: Anglicisms in the German Hip Hop Community (United States)

    Garley, Matthew E.


    The influence of English on German has been an ongoing subject of intense popular and academic interest in the German sphere. In order to better understand this language contact situation, this research project investigates anglicisms--instances of English language material in a German language context--in the German hip hop community, where the…

  13. Hopping in a supercooled binary Lennard-Jones liquid

    DEFF Research Database (Denmark)

    Schrøder, Thomas; Dyre, Jeppe


    A binary Lennard–Jones liquid has been investigated by molecular dynamics at equilibrium supercooled conditions. At the lowest temperature investigated, hopping is present in the system as indicated by a secondary peak in 4r2Gs(r,t), where Gs(r,t) is the van Hove self correlation function...

  14. Investigación a ritmo de hip-hop

    Directory of Open Access Journals (Sweden)

    Melisa Rivière


    Full Text Available Soñando se resiste. Hip-hop; en la calle y al parque. Varios autores. Alcaldía Mayor de Bogotá, Secretaría de Cultura, Recreación y Deporte, Orquesta Filarmónica de Bogotá, Bogotá, 2010, 180 págs.

  15. Maroc-hop: music and youth identities in the Netherlands

    NARCIS (Netherlands)

    Gazzah, M.; Herrera, L.; Bayat, A.


    Two musical forms highly popular among youths of Moroccan origin in the Netherlands—Maroc-hop and Shaabi—permit youths to express specific and multiple identities in local contexts. Shaabi, a popular form of Moroccan folk music used to be found mainly in the private setting of family celebrations,

  16. Examining Hip-Hop as Culturally Relevant Pedagogy (United States)

    Kim, Jung; Pulido, Isaura


    Culturally relevant pedagogy is a framework that conceptualizes the process of student learning as contingent upon educators' deep understanding of students' cultural backgrounds to co-construct knowledge and develop academic skills. Concurrently, there are a growing number of studies that explore hip-hop as a culturally relevant curriculum for…

  17. Contribution of afferent feedback and descending drive to human hopping

    DEFF Research Database (Denmark)

    Zuur, Abraham T.; Lundbye-Jensen, Jesper; Leukel, Christian


    to inhibit the motor cortex and this resulted in a suppression of the early EMG burst. These results suggest that sensory feedback and descending drive from the motor cortex are integrated to drive the motor neuron pool during the early EMG burst in hopping. Thus, simple reflexes work in concert with higher...

  18. Potential African Substitutes for Hops in Tropical Beer Brewing ...

    African Journals Online (AJOL)

    ... the vegetables were stored at ambient temperature than when they were stored at refrigeration or freezing temperatures. Losses in bitterness were more for water extracts than for organic solvent extracts. Key Words: Hops, Resins, Essential Oils, Bitterness level. Journal of Food Technology in Africa Vol.9(1) 2004: 13-16 ...

  19. SHOP: scaffold hopping by GRID-based similarity searches

    DEFF Research Database (Denmark)

    Bergmann, Rikke; Linusson, Anna; Zamora, Ismael


    A new GRID-based method for scaffold hopping (SHOP) is presented. In a fully automatic manner, scaffolds were identified in a database based on three types of 3D-descriptors. SHOP's ability to recover scaffolds was assessed and validated by searching a database spiked with fragments of known...

  20. Analytical methods for quantitation of prenylated flavonoids from hops (United States)

    Nikolić, Dejan; van Breemen, Richard B.


    The female flowers of hops (Humulus lupulus L.) are used as a flavoring agent in the brewing industry. There is growing interest in possible health benefits of hops, particularly as estrogenic and chemopreventive agents. Among the possible active constituents, most of the attention has focused on prenylated flavonoids, which can chemically be classified as prenylated chalcones and prenylated flavanones. Among chalcones, xanthohumol (XN) and desmethylxanthohumol (DMX) have been the most studied, while among flavanones, 8-prenylnaringenin (8-PN) and 6-prenylnaringenin (6-PN) have received the most attention. Because of the interest in medicinal properties of prenylated flavonoids, there is demand for accurate, reproducible and sensitive analytical methods to quantify these compounds in various matrices. Such methods are needed, for example, for quality control and standardization of hop extracts, measurement of the content of prenylated flavonoids in beer, and to determine pharmacokinetic properties of prenylated flavonoids in animals and humans. This review summarizes currently available analytical methods for quantitative analysis of the major prenylated flavonoids, with an emphasis on the LC-MS and LC-MS-MS methods and their recent applications to biomedical research on hops. This review covers all methods in which prenylated flavonoids have been measured, either as the primary analytes or as a part of a larger group of analytes. The review also discusses methodological issues relating to the quantitative analysis of these compounds regardless of the chosen analytical approach. PMID:24077106

  1. High Order Differential Frequency Hopping: Design and Analysis

    Directory of Open Access Journals (Sweden)

    Yong Li


    Full Text Available This paper considers spectrally efficient differential frequency hopping (DFH system design. Relying on time-frequency diversity over large spectrum and high speed frequency hopping, DFH systems are robust against hostile jamming interference. However, the spectral efficiency of conventional DFH systems is very low due to only using the frequency of each channel. To improve the system capacity, in this paper, we propose an innovative high order differential frequency hopping (HODFH scheme. Unlike in traditional DFH where the message is carried by the frequency relationship between the adjacent hops using one order differential coding, in HODFH, the message is carried by the frequency and phase relationship using two-order or higher order differential coding. As a result, system efficiency is increased significantly since the additional information transmission is achieved by the higher order differential coding at no extra cost on either bandwidth or power. Quantitative performance analysis on the proposed scheme demonstrates that transmission through the frequency and phase relationship using two-order or higher order differential coding essentially introduces another dimension to the signal space, and the corresponding coding gain can increase the system efficiency.

  2. Costs and returns of producing hops in established tree plantations (United States)

    Kim Ha; Shadi Atallah; Tamara Benjamin; Lori Hoagland; Lenny Farlee; Keith. Woeste


    This article is the first of two publications that analyzes economic opportunities in forest farming for Indiana forest plantation owners. This study explores growing hops along the fence lines of newly established forest stands, while the second study investigates producing American ginseng in older (20- to 30-year-old) forests. The economic analysis presented in this...

  3. Hopping locomotion at different gravity: metabolism and mechanics in humans. (United States)

    Pavei, Gaspare; Minetti, Alberto E


    Previous literature on the effects of low gravity on the mechanics and energetics of human locomotion already dealt with walking, running, and skipping. The aim of the present study is to obtain a comprehensive view on that subject by including measurements of human hopping in simulated low gravity, a gait often adopted in many Apollo Missions and documented in NASA footage. Six subjects hopped at different speeds at terrestrial, Martian, and Lunar gravity on a treadmill while oxygen consumption and 3D body kinematic were sampled. Results clearly indicate that hopping is too metabolically expensive to be a sustainable locomotion on Earth but, similarly to skipping (and running), its economy greatly (more than ×10) increases at lower gravity. On the Moon, the metabolic cost of hopping becomes even lower than that of walking, skipping, and running, but the general finding is that gaits with very different economy on Earth share almost the same economy on the Moon. The mechanical reasons for such a decrease in cost are discussed in the paper. The present data, together with previous findings, will allow also to predict the aerobic traverse range/duration of astronauts when getting far from their base station on low gravity planets. Copyright © 2016 the American Physiological Society.

  4. Hip-Hop and Bongo Flavour Music in Contemporary Tanzania ...

    African Journals Online (AJOL)

    ... used as instruments to innovate and produce change, this article argues that Bongo Flavour and hip-hop are not only music genres, but also cultural expressions necessary for the understanding of a substantial part of contemporary Tanzanian youths. The focus here is on young male artists living in urban environments.

  5. Chicano Hip-Hop as Interethnic Contact Zone (United States)

    McFarland, Pancho


    Hip-hop is an interethnic contact zone that allows for the creation of new expressive cultures and new identities for young people. Its openness derives in part from the wide range of expression and interpretation allowed in 182 "McFarland" African musics. Moving beyond the often stifling options offered by an earlier generation that focused on…

  6. Young Children Manifest Spiritualities in Their Hip-Hop Writing (United States)

    Norton, Nadjwa E. L.


    In this article, the author combines multicultural feminist critical theories with the voices of Black and Latina/Latino young spiritual children to extend culturally responsive teaching. The author illuminates how children use their hip-hop writing to construct themselves as people who communicate with God, choose spiritual content for their…

  7. Can a semi-automated surface matching and principal axis-based algorithm accurately quantify femoral shaft fracture alignment in six degrees of freedom? (United States)

    Crookshank, Meghan C; Beek, Maarten; Singh, Devin; Schemitsch, Emil H; Whyne, Cari M


    Accurate alignment of femoral shaft fractures treated with intramedullary nailing remains a challenge for orthopaedic surgeons. The aim of this study is to develop and validate a cone-beam CT-based, semi-automated algorithm to quantify the malalignment in six degrees of freedom (6DOF) using a surface matching and principal axes-based approach. Complex comminuted diaphyseal fractures were created in nine cadaveric femora and cone-beam CT images were acquired (27 cases total). Scans were cropped and segmented using intensity-based thresholding, producing superior, inferior and comminution volumes. Cylinders were fit to estimate the long axes of the superior and inferior fragments. The angle and distance between the two cylindrical axes were calculated to determine flexion/extension and varus/valgus angulation and medial/lateral and anterior/posterior translations, respectively. Both surfaces were unwrapped about the cylindrical axes. Three methods of matching the unwrapped surface for determination of periaxial rotation were compared based on minimizing the distance between features. The calculated corrections were compared to the input malalignment conditions. All 6DOF were calculated to within current clinical tolerances for all but two cases. This algorithm yielded accurate quantification of malalignment of femoral shaft fractures for fracture gaps up to 60 mm, based on a single CBCT image of the fractured limb. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.


    Directory of Open Access Journals (Sweden)

    Nining W. Kusnanik


    Full Text Available The main purpose of this study was to determine the effect of single leg hop progression and double legs hop progression exercise to increase speed and explosive power of leg muscles. Plyometric is one of the training methods that can increase explosive power. There are many models of plyometric training including single leg hop progression and double leg hop progression. This research was experimental using match subject design techniques. The subjects of this study were 39 students who joined basketball school club. There were 3 groups in this study: Group 1 were 13 students who given sin¬gle leg hop progression exercise, Group 2 were 13 students who given double legs hop progression exercise, Group 3 were 13 students who given conventional exercise. The data was collected during pre test and post test by testing 30m speed running and vertical jump. The data was analyzed using Analysis of Varians (Anova. It was found that there were significantly increased on speed and explosive power of leg muscles of Group 1 and Group 2. It can be stated that single leg hop progression exercise was more effective than double leg hop progression exercise. The recent findings supported the hypothesis that single leg hop progression and double legs hop progression exercise can increase speed and explosive power of leg muscles. These finding were supported by some previous studies (Singh, et al, 2011; Shallaby, H.K., 2010. The single leg hop progression is more effective than double legs hop progression. This finding was consistent with some previous evidences (McCurdy, et al, 2005; Makaruk et al, 2011.

  9. Improved Determination of Surface and Atmospheric Temperatures Using Only Shortwave AIRS Channels: The AIRS Version 6 Retrieval Algorithm (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena


    AIRS was launched on EOS Aqua on May 4, 2002 together with ASMU-A and HSB to form a next generation polar orbiting infrared and microwave atmosphere sounding system (Pagano et al 2003). The theoretical approach used to analyze AIRS/AMSU/HSB data in the presence of clouds in the AIRS Science Team Version 3 at-launch algorithm, and that used in the Version 4 post-launch algorithm, have been published previously. Significant theoretical and practical improvements have been made in the analysis of AIRS/AMSU data since the Version 4 algorithm. Most of these have already been incorporated in the AIRS Science Team Version 5 algorithm (Susskind et al 2010), now being used operationally at the Goddard DISC. The AIRS Version 5 retrieval algorithm contains three significant improvements over Version 4. Improved physics in Version 5 allowed for use of AIRS clear column radiances (R(sub i)) in the entire 4.3 micron CO2 absorption band in the retrieval of temperature profiles T(p) during both day and night. Tropospheric sounding 15 micron CO2 observations were used primarily in the generation of clear column radiances (R(sub i)) for all channels. This new approach allowed for the generation of accurate Quality Controlled values of R(sub i) and T(p) under more stressing cloud conditions. Secondly, Version 5 contained a new methodology to provide accurate case-by-case error estimates for retrieved geophysical parameters and for channel-by-channel clear column radiances. Thresholds of these error estimates are used in a new approach for Quality Control. Finally, Version 5 contained for the first time an approach to provide AIRS soundings in partially cloudy conditions that does not require use of any microwave data. This new AIRS Only sounding methodology was developed as a backup to AIRS Version 5 should the AMSU-A instrument fail. Susskind et al 2010 shows that Version 5 AIRS Only sounding are only slightly degraded from the AIRS/AMSU soundings, even at large fractional cloud

  10. Frequency Hopping Method for Audio Watermarking

    Directory of Open Access Journals (Sweden)

    A. Anastasijević


    Full Text Available This paper evaluates the degradation of audio content for a perceptible removable watermark. Two different approaches to embedding the watermark in the spectral domain were investigated. The frequencies for watermark embedding are chosen according to a pseudorandom sequence making the methods robust. Consequentially, the lower quality audio can be used for promotional purposes. For a fee, the watermark can be removed with a secret watermarking key. Objective and subjective testing was conducted in order to measure degradation level for the watermarked music samples and to examine residual distortion for different parameters of the watermarking algorithm and different music genres.

  11. Hop pellets as an interesting source of antioxidant active compounds

    Directory of Open Access Journals (Sweden)

    Andrea Holubková


    Full Text Available Hop is a plant used by humankind for thousands of years. This plant is one of the main and indispensable raw materials for the beer production. It is used for various dishes preparation in the cuisine. Hop is also used to inhibit bacterial contamination. The hop extracts are used for its sedative, antiseptic and antioxidant properties in medicine, as a part of many phytopharmaceuticals. The present paper have focused on the extraction of polyphenolic compounds from 4 samples of hop pellets varieties of Aurora, Saaz, Lublin and Saphir, on the analyzing of bioactive substances (polyphenolics and flavonoids in prepared extracts and on the determination of antioxidant activity.  The highest content of polyphenolic substances was determined in the sample Lublin (153.06 mg gallic acid (GAE/g and Saaz (151.87 mg GAE/g. The amount of flavonoids in the samples  was descending order Saaz > Saphir > Aurora > Lublin. Hops, as plant, is known by high content of antioxidant active substances. Antioxidant activity was determined using three independent spectrofotometric methods, radical scavenging assays using 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS and 1,1-diphenyl-2-picrylhydrazyl (DPPH radical and ferric reducing antioxidant power (FRAP. The sample Aurora showed the highest ability to scavenge of ABTS radical cation. Antioxidant activity continued to decline in a row Saphir> Lublin> Saaz. The same trend was also observed by using the FRAP assay. The most effective DPPH radical scavengering activity had the sample Saaz a Saphir (p>0.05.doi:10.5219/270 Normal 0 21 false false false SK X-NONE X-NONE

  12. Machine learning algorithms based on signals from a single wearable inertial sensor can detect surface- and age-related differences in walking. (United States)

    Hu, B; Dixon, P C; Jacobs, J V; Dennerlein, J T; Schiffman, J M


    The aim of this study was to investigate if a machine learning algorithm utilizing triaxial accelerometer, gyroscope, and magnetometer data from an inertial motion unit (IMU) could detect surface- and age-related differences in walking. Seventeen older (71.5 ± 4.2 years) and eighteen young (27.0 ± 4.7 years) healthy adults walked over flat and uneven brick surfaces wearing an inertial measurement unit (IMU) over the L5 vertebra. IMU data were binned into smaller data segments using 4-s sliding windows with 1-s step lengths. Ninety percent of the data were used as training inputs and the remaining ten percent were saved for testing. A deep learning network with long short-term memory units was used for training (fully supervised), prediction, and implementation. Four models were trained using the following inputs: all nine channels from every sensor in the IMU (fully trained model), accelerometer signals alone, gyroscope signals alone, and magnetometer signals alone. The fully trained models for surface and age outperformed all other models (area under the receiver operator curve, AUC = 0.97 and 0.96, respectively; p ≤ .045). The fully trained models for surface and age had high accuracy (96.3, 94.7%), precision (96.4, 95.2%), recall (96.3, 94.7%), and f1-score (96.3, 94.6%). These results demonstrate that processing the signals of a single IMU device with machine-learning algorithms enables the detection of surface conditions and age-group status from an individual's walking behavior which, with further learning, may be utilized to facilitate identifying and intervening on fall risk. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Immunomodulation by the Pseudomonas syringae HopZ type III effector family in Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Jennifer D Lewis

    Full Text Available Pseudomonas syringae employs a type III secretion system to inject 20-30 different type III effector (T3SE proteins into plant host cells. A major role of T3SEs is to suppress plant immune responses and promote bacterial infection. The YopJ/HopZ acetyltransferases are a superfamily of T3SEs found in both plant and animal pathogenic bacteria. In P. syringae, this superfamily includes the evolutionarily diverse HopZ1, HopZ2 and HopZ3 alleles. To investigate the roles of the HopZ family in immunomodulation, we generated dexamethasone-inducible T3SE transgenic lines of Arabidopsis for HopZ family members and characterized them for immune suppression phenotypes. We show that all of the HopZ family members can actively suppress various facets of Arabidopsis immunity in a catalytic residue-dependent manner. HopZ family members can differentially suppress the activation of mitogen-activated protein (MAP kinase cascades or the production of reactive oxygen species, whereas all members can promote the growth of non-virulent P. syringae. Localization studies show that four of the HopZ family members containing predicted myristoylation sites are localized to the vicinity of the plasma membrane while HopZ3 which lacks the myristoylation site is at least partially nuclear localized, suggesting diversification of immunosuppressive mechanisms. Overall, we demonstrate that despite significant evolutionary diversification, all HopZ family members can suppress immunity in Arabidopsis.

  14. The content of vitamine E in hop cones of the Saaz variety

    Directory of Open Access Journals (Sweden)

    Helena Pluháčková


    Full Text Available The activity of vitamin E, total content of tocols and the content of individual isomers: α-tocopherols, β-tocopherols, γ-tocopherols and δ-tocopherols was monitored in samples of hop cones of the world-important Saaz variety. Hop cone samples originated from hop-breeding area Tršice, Czech Republic. The method used for the determination of vitamin E in barley was modified and used for this quantitative analysis. The results indicate that monitored characteristics are influenced by the year of harvest (2010 or 2011 but also by the age of hop-gardens (hop bucks. High values of vitamin E activity (up to 67.79−1 and total content of tocols (up to 76.31−1 in hop cones are worth further attention from the viewpoint of alternative use of hops.

  15. Systematic and efficient navigating potential energy surface: Data for silver doped gold clusters

    Directory of Open Access Journals (Sweden)

    Vitaly V. Chaban


    Full Text Available Locating global minimum of certain atomistic ensemble is known to be a highly challenging and resource consuming task. This dataset represents joint usage of the semi-empirical PM7 Hamiltonian, Broyden–Fletcher–Goldfarb–Shanno algorithm and basin hopping scheme to navigate a potential energy surface. The Au20 nanocluster was used for calibration as its global minimum structure is well-known. Furthermore, Au18Ag2 and Au15Ag5 were simulated for illustration of the algorithm performance. The work shows encouraging results and, particularly, underlines proper accuracy of PM7 as applied to this type of heavy metal systems. The reported dataset motivates to use the benchmarked method for studying potential energy surfaces of manifold systems and locate their global-minimum atomistic configurations.

  16. Sea Surface Salinity and Wind Retrieval Algorithm Using Combined Passive-Active L-Band Microwave Data (United States)

    Yueh, Simon H.; Chaubell, Mario J.


    Aquarius is a combined passive/active L-band microwave instrument developed to map the salinity field at the surface of the ocean from space. The data will support studies of the coupling between ocean circulation, the global water cycle, and climate. The primary science objective of this mission is to monitor the seasonal and interannual variation of the large scale features of the surface salinity field in the open ocean with a spatial resolution of 150 kilometers and a retrieval accuracy of 0.2 practical salinity units globally on a monthly basis. The measurement principle is based on the response of the L-band (1.413 gigahertz) sea surface brightness temperatures (T (sub B)) to sea surface salinity. To achieve the required 0.2 practical salinity units accuracy, the impact of sea surface roughness (e.g. wind-generated ripples and waves) along with several factors on the observed brightness temperature has to be corrected to better than a few tenths of a degree Kelvin. To the end, Aquarius includes a scatterometer to help correct for this surface roughness effect.

  17. Role of transverse hopping in a two-coupled-chains model

    International Nuclear Information System (INIS)

    Fabrizio, M.


    We study the effect of a transverse hopping t perpendicular in two chains of both spinless and spinning repulsively interacting fermions, by means of renormalization group and bosonization techniques. We show that, independent of the presence of spin, t perpendicular strongly modifies the asymptotic long-wavelength behavior of the two chains, opening gaps in the excitation spectra. The origin of the instability of the gapless Luttinger-liquid behavior is identified in the flavor (==chain index) anisotropy induced by t perpendicular . In the case of spinning fermions, it leads to dominant pair fluctuations, in spite of the repulsive interaction. The role of spin is further analyzed in a model of two coupled chains showing, in the absence of t perpendicular , spin-charge separation without anomalous exponents. We solve this model exactly by the bosonization technique, and we find that the interesting analytical properties induced by spin-charge separation persist in the presence of transverse hopping, although t perpendicular does modify the shape of the Fermi surface. The asymptotic expression of the single-particle Green function is also obtained

  18. Hip-Hop Guayaquil: culturas viajeras e identidades locales

    Directory of Open Access Journals (Sweden)


    Full Text Available HIP-HOP GUAYAQUIL: CULTURES ITINÉRANTES ET IDENTITES LOCALES. Le hip-hop est un style de musique contemporaine caractérisé par une orchestration d’œuvres lyriques rapées, la superposition de morceaux de musique enregistrés dans le passé par différents artistes, et une instrumentation électronique, tout cela sur des rythmes de basse réguliers et constants. Le hip-hop, musique accompagnée de ses propres danses et de sa mode, est le produit du déplacement et de la transformation d’une variété d’idéologies politiques de la communauté noire qui se constituent à partir de relations qui se modifient entre elles, et en relation avec les cultures dominantes contre lesquelles elles luttent quotidiennement. À l’origine, le hip-hop est lié à des mouvements d’identité de jeunes noirs. Dans cet article, il est intéressant d’étudier le rôle du hip-hop dans la formulation d’une identité entre jeunes métisses et noirs des secteurs populaires de Guayaquil. Cet exemple illustre la nécessité d’inclure dans l’analyse les dimensions politiques des processus de traduction du global au niveau local. El hip-hop es un género de música contemporánea caracterizado por la orquestación de líricas que son rapeadas, superposición de fragmentos de música grabada en el pasado por diferentes artistas, e instrumentación electrónica, todo ello sobre ritmos de bajo regulares y constantes. Como un tipo de música acompañado por sus propias formas de danza y moda, el hip-hop es producto del viaje y la transformación de una variedad de ideologías políticas de la comunidad negra que se constituyen a sí mismas en relaciones cambiantes entre sí y en relación a las culturas dominantes contra las cuales luchan cotidianamente. El hip-hop está ligado, en su contexto originario, a políticas de identidad defendidas por jóvenes negros. Lo que interesa explorar en este artículo es el papel del hip-hop en la formulación de una identidad

  19. Multi-objective parametric optimization of Inertance type pulse tube refrigerator using response surface methodology and non-dominated sorting genetic algorithm (United States)

    Rout, Sachindra K.; Choudhury, Balaji K.; Sahoo, Ranjit K.; Sarangi, Sunil K.


    The modeling and optimization of a Pulse Tube Refrigerator is a complicated task, due to its complexity of geometry and nature. The aim of the present work is to optimize the dimensions of pulse tube and regenerator for an Inertance-Type Pulse Tube Refrigerator (ITPTR) by using Response Surface Methodology (RSM) and Non-Sorted Genetic Algorithm II (NSGA II). The Box-Behnken design of the response surface methodology is used in an experimental matrix, with four factors and two levels. The diameter and length of the pulse tube and regenerator are chosen as the design variables where the rest of the dimensions and operating conditions of the ITPTR are constant. The required output responses are the cold head temperature (Tcold) and compressor input power (Wcomp). Computational fluid dynamics (CFD) have been used to model and solve the ITPTR. The CFD results agreed well with those of the previously published paper. Also using the results from the 1-D simulation, RSM is conducted to analyse the effect of the independent variables on the responses. To check the accuracy of the model, the analysis of variance (ANOVA) method has been used. Based on the proposed mathematical RSM models a multi-objective optimization study, using the Non-sorted genetic algorithm II (NSGA-II) has been performed to optimize the responses.

  20. The hypothesis of formation of the structure of surfaced metal at the surfacing based on the application of the prognostic algorithm of control the electrode wire speed

    Directory of Open Access Journals (Sweden)

    Lebedev V. A.


    Full Text Available The growth of a drop in the process of surfacing by a consumable electrode is characterized by a linear dependence of the current change on time. A hypothesis has been put forward, according to which a reduction in the feed rate of the electrode wire to zero in this time interval will substantially reduce the spraying loss and improve the formation of the surfacing roller. For the implementation of which, the use of regulators with a typical law of regulation is proposed, but not according to the current value of the arc current, but according to the forecast. A key feature of these researches is a realization given surfacing process with the imposition of external mechanical oscillations with specified amplitude-frequency characteristics on the welding bath. Analytical calculation of the transfer function for the prognostic PID regulator with the simplest linear prediction taking into account the oscillation of the weld pool is given.

  1. Precision Interval Estimation of the Response Surface by Means of an Integrated Algorithm of Neural Network and Linear Regression (United States)

    Lo, Ching F.


    The integration of Radial Basis Function Networks and Back Propagation Neural Networks with the Multiple Linear Regression has been accomplished to map nonlinear response surfaces over a wide range of independent variables in the process of the Modem Design of Experiments. The integrated method is capable to estimate the precision intervals including confidence and predicted intervals. The power of the innovative method has been demonstrated by applying to a set of wind tunnel test data in construction of response surface and estimation of precision interval.

  2. New Algorithms for Global Optimization and Reaction Path Determination. (United States)

    Weber, D; Bellinger, D; Engels, B


    We present new schemes to improve the convergence of an important global optimization problem and to determine reaction pathways (RPs) between identified minima. Those methods have been implemented into the CAST program (Conformational Analysis and Search Tool). The first part of this chapter shows how to improve convergence of the Monte Carlo with minimization (MCM, also known as Basin Hopping) method when applied to optimize water clusters or aqueous solvation shells using a simple model. Since the random movement on the potential energy surface (PES) is an integral part of MCM, we propose to employ a hydrogen bonding-based algorithm for its improvement. We show comparisons of the results obtained for random dihedral and for the proposed random, rigid-body water molecule movement, giving evidence that a specific adaption of the distortion process greatly improves the convergence of the method. The second part is about the determination of RPs in clusters between conformational arrangements and for reactions. Besides standard approaches like the nudged elastic band method, we want to focus on a new algorithm developed especially for global reaction path search called Pathopt. We started with argon clusters, a typical benchmark system, which possess a flat PES, then stepwise increase the magnitude and directionality of interactions. Therefore, we calculated pathways for a water cluster and characterize them by frequency calculations. Within our calculations, we were able to show that beneath local pathways also additional pathways can be found which possess additional features. © 2016 Elsevier Inc. All rights reserved.

  3. Generalized Split-Window Algorithm for Estimate of Land Surface Temperature from Chinese Geostationary FengYun Meteorological Satellite (FY-2C Data

    Directory of Open Access Journals (Sweden)

    Jun Xia


    Full Text Available On the basis of the radiative transfer theory, this paper addressed the estimate ofLand Surface Temperature (LST from the Chinese first operational geostationarymeteorological satellite-FengYun-2C (FY-2C data in two thermal infrared channels (IR1,10.3-11.3 μ m and IR2, 11.5-12.5 μ m , using the Generalized Split-Window (GSWalgorithm proposed by Wan and Dozier (1996. The coefficients in the GSW algorithmcorresponding to a series of overlapping ranging of the mean emissivity, the atmosphericWater Vapor Content (WVC, and the LST were derived using a statistical regressionmethod from the numerical values simulated with an accurate atmospheric radiativetransfer model MODTRAN 4 over a wide range of atmospheric and surface conditions.The simulation analysis showed that the LST could be estimated by the GSW algorithmwith the Root Mean Square Error (RMSE less than 1 K for the sub-ranges with theViewing Zenith Angle (VZA less than 30° or for the sub-rangs with VZA less than 60°and the atmospheric WVC less than 3.5 g/cm2 provided that the Land Surface Emissivities(LSEs are known. In order to determine the range for the optimum coefficients of theGSW algorithm, the LSEs could be derived from the data in MODIS channels 31 and 32 provided by MODIS/Terra LST product MOD11B1, or be estimated either according tothe land surface classification or using the method proposed by Jiang et al. (2006; and theWVC could be obtained from MODIS total precipitable water product MOD05, or beretrieved using Li et al.’ method (2003. The sensitivity and error analyses in term of theuncertainty of the LSE and WVC as well as the instrumental noise were performed. Inaddition, in order to compare the different formulations of the split-window algorithms,several recently proposed split-window algorithms were used to estimate the LST with thesame simulated FY-2C data. The result of the intercomparsion showed that most of thealgorithms give

  4. A wetting and drying algorithm with a combined pressure/free-surface formulation for non-hydrostatic models (United States)

    Funke, S. W.; Pain, C. C.; Kramer, S. C.; Piggott, M. D.


    A wetting and drying method for free-surface problems for the three-dimensional, non-hydrostatic Navier-Stokes equations is proposed. The key idea is to use a horizontally fixed mesh and to apply different boundary conditions on the free-surface in wet and dry zones. In wet areas a combined pressure/free-surface kinematic boundary condition is applied, while in dry areas a positive water level and a no-normal flow boundary condition are enforced. In addition, vertical mesh movement is performed to accurately represent the free-surface motion. Non-physical flow in the remaining thin layer in dry areas is naturally prevented if a Manning-Strickler bottom drag is used. The treatment of the wetting and drying processes applied through the boundary condition yields great flexibility to the discretisation used. Specifically, a fully unstructured mesh with any finite element choice and implicit time discretisation method can be applied. The resulting method is mass conservative, stable and accurate. It is implemented within Fluidity-ICOM [1] and verified against several idealized test cases and a laboratory experiment of the Okushiri tsunami.

  5. A fast, magnetics-free flux surface estimation and q-profile reconstruction algorithm for feedback control of plasma profiles

    NARCIS (Netherlands)

    Hommen, G.; de M. Baar,; Citrin, J.; de Blank, H. J.; Voorhoeve, R. J.; de Bock, M. F. M.; Steinbuch, M.


    The flux surfaces' layout and the magnetic winding number q are important quantities for the performance and stability of tokamak plasmas. Normally, these quantities are iteratively derived by solving the plasma equilibrium for the poloidal and toroidal flux. In this work, a fast, non-iterative

  6. Hip-Hop(e): The Cultural Practice and Critical Pedagogy of International Hip-Hop. Adolescent Cultures, School, and Society. Volume 56 (United States)

    Porfilio, Brad J., Ed.; Viola, Michael J., Ed.


    Illuminating hip-hop as an important cultural practice and a global social movement, this collaborative project highlights the emancipatory messages and cultural work generated by the organic intellectuals of global hip-hop. Contributors describe the social realities--globalization, migration, poverty, criminalization, and racism--youth are…

  7. Fast frequency hopping codes applied to SAC optical CDMA network (United States)

    Tseng, Shin-Pin


    This study designed a fast frequency hopping (FFH) code family suitable for application in spectral-amplitude-coding (SAC) optical code-division multiple-access (CDMA) networks. The FFH code family can effectively suppress the effects of multiuser interference and had its origin in the frequency hopping code family. Additional codes were developed as secure codewords for enhancing the security of the network. In considering the system cost and flexibility, simple optical encoders/decoders using fiber Bragg gratings (FBGs) and a set of optical securers using two arrayed-waveguide grating (AWG) demultiplexers (DeMUXs) were also constructed. Based on a Gaussian approximation, expressions for evaluating the bit error rate (BER) and spectral efficiency (SE) of SAC optical CDMA networks are presented. The results indicated that the proposed SAC optical CDMA network exhibited favorable performance.


    Directory of Open Access Journals (Sweden)

    Cristiano Nunes Alves


    Full Text Available This paper examines the thickness of the circuit hip hop in the region of Campinas and it’s a part of an inventory made in fifteen cities of the region, between 2003 and 2005. The circuit hip hop growing in Campinas since the decade of 1980, and has been expanding in the context of urbanization and metropolis. We noticed some residual cultural component in places involves, among others, the alternative production involved by a technically and territorial division of labor spurred by circuits upside of information. The culture of the streets and these circuits, survive to the urban division and fragmentation. It is, therefore, a study of the region of Campinas as a place that houses technical, informational and communicational densities. We analyzed geographical conditions of contemporary life in this region, inquiring about the communication and the informational components in the use of the territory.

  9. Superconducting correlations in Hubbard chains with correlated hopping (United States)

    Arrachea, L.; Aligia, A. A.; Gagliano, E.; Hallberg, K.; Balseiro, C.


    We consider an extended one-dimensional Hubbard model in which the magnitude of the hopping between two sites for particles with given spin depends on the occupation of the states with opposite spin at both sites. Diagonalizing exactly finite-size chains, and using known results of conformal field theory we delimit the regions of parameters for which two particles bind and the pair superconducting correlation functions are the dominant ones at large distances. For Coulomb repulsion U smaller than a critical density-dependent value Uc and any density, there are ranges of the ratios of the hopping parameters for which the superconducting fluctuations dominate. At half filling, for parameters within this range, a transition from a regime with dominant superconducting correlations to an insulating state takes place as a function of U. We also study the model for parameters near a recently found exactly solvable limit in which the number of doubly occupied sites is conserved.

  10. Changes in the hop-derived volatile profile upon lab scale boiling. (United States)

    Praet, Tatiana; Van Opstaele, Filip; Steenackers, Bart; De Brabanter, Joseph; De Vos, Dirk; Aerts, Guido; De Cooman, Luc


    Hop terpenes might be oxidized during kettle boiling into more water soluble compounds that could contribute to 'hoppy' aroma of kettle hopped lager beers. Our current research proves that the boiling process induces significant changes in the hop oil volatile profile. The discrimination between volatile profiles of unboiled and boiled hop essential oil was evaluated via principal component and cluster analysis (PCA and CA). HS-SPME-GC-MS analysis revealed quantitative changes (e.g. increases in the levels of oxygenated α-humulene and β-caryophyllene derivatives) as well as qualitative changes (i.e. detection of compounds, not found in unboiled hop essential oil) in the hop oil volatile profile upon boiling. Many of these compounds were previously found in lager beer and may therefore contribute to beer flavor. Interestingly, the analytical difference between unboiled and boiled hop essential oil proved to be more pronounced as the initial hop essential oil concentration used for boiling was increased. In addition, lager beers spiked with boiled hop oil were described as 'hoppy/spicy' during sensory evaluations. Therefore, the newly formed products and hop oil constituents that are characterized by an increased recovery after boiling, are candidate compounds for 'hoppy' aroma in real brewing practice. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. History Matching and Parameter Estimation of Surface Deformation Data for a CO2 Sequestration Field Project Using Ensemble-Based Algorithms (United States)

    Tavakoli, Reza; Srinivasan, Sanjay; Wheeler, Mary


    The application of ensemble-based algorithms for history matching reservoir models has been steadily increasing over the past decade. However, the majority of implementations in the reservoir engineering have dealt only with production history matching. During geologic sequestration, the injection of large quantities of CO2 into the subsurface may alter the stress/strain field which in turn can lead to surface uplift or subsidence. Therefore, it is essential to couple multiphase flow and geomechanical response in order to predict and quantify the uncertainty of CO2 plume movement for long-term, large-scale CO2 sequestration projects. In this work, we simulate and estimate the properties of a reservoir that is being used to store CO2 as part of the In Salah Capture and Storage project in Algeria. The CO2 is separated from produced natural gas and is re-injected into downdip aquifer portion of the field from three long horizontal wells. The field observation data includes ground surface deformations (uplift) measured using satellite-based radar (InSAR), injection well locations and CO2 injection rate histories provided by the operators. We implement variations of ensemble Kalman filter and ensemble smoother algorithms for assimilating both injection rate data as well as geomechanical observations (surface uplift) into reservoir model. The preliminary estimation results of horizontal permeability and material properties such as Young Modulus and Poisson Ratio are consistent with available measurements and previous studies in this field. Moreover, the existence of high-permeability channels (fractures) within the reservoir; especially in the regions around the injection wells are confirmed. This estimation results can be used to accurately and efficiently predict and quantify the uncertainty in the movement of CO2 plume.

  12. History matching and parameter estimation of surface deformation data for a CO2 sequestration field project using ensemble-based algorithm (United States)

    Ping, J.; Tavakoli, R.; Min, B.; Srinivasan, S.; Wheeler, M. F.


    Optimal management of subsurface processes requires the characterization of the uncertainty in reservoir description and reservoir performance prediction. The application of ensemble-based algorithms for history matching reservoir models has been steadily increasing over the past decade. However, the majority of implementations in the reservoir engineering have dealt only with production history matching. During geologic sequestration, the injection of large quantities of CO2 into the subsurface may alter the stress/strain field which in turn can lead to surface uplift or subsidence. Therefore, it is essential to couple multiphase flow and geomechanical response in order to predict and quantify the uncertainty of CO2 plume movement for long-term, large-scale CO2 sequestration projects. In this work, we simulate and estimate the properties of a reservoir that is being used to store CO2 as part of the In Salah Capture and Storage project in Algeria. The CO2 is separated from produced natural gas and is re-injected into downdip aquifer portion of the field from three long horizontal wells. The field observation data includes ground surface deformations (uplift) measured using satellite-based radar (InSAR), injection well locations and CO2 injection rate histories provided by the operators. We implement ensemble-based algorithms for assimilating both injection rate data as well as geomechanical observations (surface uplift) into reservoir model. The preliminary estimation results of horizontal permeability and material properties such as Young Modulus and Poisson Ratio are consistent with available measurements and previous studies in this field. Moreover, the existence of high-permeability channels/fractures within the reservoir; especially in the regions around the injection wells are confirmed. This estimation results can be used to accurately and efficiently predict and monitor the movement of CO2 plume.

  13. HPLC Analysis of alpha and beta Acids in Hops

    Energy Technology Data Exchange (ETDEWEB)

    Danenhower, Travis [Kutztown University; Force, Leyna [Kutztown University; Petersen, Kenneth [Kutztown University; Betts, Thomas [Kutztown University; Baker, Gary A [ORNL


    Early in brewing history, a variety of herbs and spices (such as coriander, rosemary, yarrow, and bog myrtle) were used to flavor beer (1). It is evident, from the Bavarian Purity Law of 1516, that a major shift in beer flavoring occurred around the middle of the second millennium. This law declared that only three ingredients could be used to brew beer: barley, water, and hops (1), thus eliminating other spices from German beer. (The importance of yeast had not yet been uncovered.)

  14. Hip Hop Dance Experience Linked to Sociocognitive Ability


    Bonny, Justin W.; Lindberg, Jenna C.; Pacampara, Marc C.


    Expertise within gaming (e.g., chess, video games) and kinesthetic (e.g., sports, classical dance) activities has been found to be linked with specific cognitive skills. Some of these skills, working memory, mental rotation, problem solving, are linked to higher performance in science, technology, math, and engineering (STEM) disciplines. In the present study, we examined whether experience in a different activity, hip hop dance, is also linked to cognitive abilities connected with STEM skill...

  15. Two-legged hopping in autism spectrum disorders

    Directory of Open Access Journals (Sweden)

    Matthew F. Moran


    Full Text Available Sensory processing deficits are common within autism spectrum disorders (ASD. Deficits have a heterogeneous dispersion across the spectrum and multimodal processing tasks are thought to magnify integration difficulties. Two-legged hopping in place in sync with an auditory cue (2.3, 3.0 Hz was studied in a group of six individuals with expressive language impaired ASD (ELI-ASD and an age-matched control group. Vertical ground reaction force data were collected and discrete Fourier transforms were utilized to determine dominant hopping cadence. Effective leg stiffness was computed through a mass-spring model representation. The ELI-ASD group were unsuccessful in matching their hopping cadence (2.21±0.30 hops•sec-1, 2.35±0.41 hops•sec-1 to either auditory cue with greater deviations at the 3.0 Hz cue. In contrast, the control group was able to match hopping cadence (2.35±0.06 hops•sec-1, 3.02±0.10 hops•sec-1 to either cue via an adjustment of effective leg stiffness. The ELI-ASD group demonstrated a varied response with an interquartile range (IQR in excess of 0.5 hops•sec-1 as compared to the control group with an IQR < 0.03 hops•sec-1. Several sensorimotor mechanisms could explain the inability of participants with ELI-ASD to modulate motor output to match an external auditory cue. These results suggest that a multimodal gross motor task can (1 discriminate performance among a group of individuals with severe autism, and (2 could be a useful quantitative tool for evaluating motor performance in individuals with ASD individuals.

  16. Rend og hop - Vi si´r stop

    DEFF Research Database (Denmark)

    Lund, Ole

    Rapporten er en evaluering af projekt Rend og hop som foregik fra 2006 - 2008 i Varde kommune. Projektet bestod af en specifik del og en genrele del, som henholdsvist var et tilbud til overvægtige børn med henblik på at give dem et sundere liv, og et forsøg på at gøre sundhed til en mere dominere...

  17. Structure and Charge Hopping Dynamics in Green Rust

    International Nuclear Information System (INIS)

    Wander, Matthew C.; Rosso, Kevin M.; Schoonen, Martin A.


    Green rust is a family of mixed-valent iron phases formed by a number of abiotic and biotic processes under alkaline suboxic conditions. Due to its high Fe2+ content, green rust is a potentially important phase for pollution remediation by serving as a powerful electron donor for reductive transformation. However, mechanisms of oxidation of this material are poorly understood. An essential component of the green rust structure is a mixed-valent brucite-like Fe(OH)2 sheet comprised of a two dimensional network of edge-sharing iron octahedra. Room temperature Mossbauer spectra show a characteristic signature for intermediate valence on the iron atoms in this sheet, indicative of a Fe2+-Fe3+ valence interchange reaction faster than approximately 107s-1. Using Fe(OH)2 as structural analogue for reduced green rust, we performed Hartree-Fock calculations on periodic slab models and cluster representations to determine the structure and hopping mobility of Fe3+ hole polarons in this material, providing a first principles assessment of the Fe2+-Fe3+ valence interchange reaction rate. The calculations show that among three possible symmetry unique iron-to-iron hops within a sheet, a hop to next-nearest neighbors at an intermediate distance of 5.6Angstroms is the fastest. The predicted rate is on the order of 1012 s-1 consistent the Mossbauer-based constraint. All other possibilities, including hopping across interlayer spaces, are predicted to be slower than 107s-1. Collectively, the findings suggest the possibility of hole self-diffusion along sheets as a mechanism for regeneration of lattice Fe2+ sites, consistent with previous experimental observations of edge-inward progressive oxidation of green rust.

  18. Tethering complexes in the endocytic pathway: CORVET and HOPS. (United States)

    Solinger, Jachen A; Spang, Anne


    Endocytosis describes the processes by which proteins, peptides and solutes, and also pathogens, enter the cell. Endocytosed material progresses to endosomes. Genetic studies in yeast, worms, flies and mammals have identified a set of universally conserved proteins that are essential for early-to-late endosome transition and lysosome biogenesis, and for endolysosomal trafficking pathways, including autophagy. The two Vps-C complexes CORVET (class C core vacuole/endosome tethering) and HOPS (homotypic fusion and vacuole protein sorting) perform diverse biochemical functions in endocytosis: they tether membranes, interact with Rab GTPases, activate and proof-read SNARE assembly to drive membrane fusion, and possibly attach endosomes to the cytoskeleton. In addition, several of the CORVET and HOPS subunits have diversified in metazoans, and probably form additional specialized complexes to accomodate the higher complexity of trafficking pathways in these cells. Recent studies offer new insights into the complex relationships between CORVET and HOPS complexes and other factors of the endolysosomal pathway. Interactions with V-ATPase, the ESCRT machinery, phosphoinositides, the cytoskeleton and the Rab switch suggest an intricate cooperative network for endosome maturation. Accumulating evidence supports the view that endosomal tethering complexes implement a regulatory logic that governs endomembrane identity and dynamics. © 2013 The Authors Journal compilation © 2013 FEBS.

  19. Performance Analysis of RF-FSO Multi-Hop Networks

    KAUST Repository

    Makki, Behrooz


    We study the performance of multi-hop networks composed of millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO) links. The results are obtained in the cases with and without hybrid automatic repeat request (HARQ). Taking the MMW characteristics of the RF links into account, we derive closed-form expressions for the network outage probability. We also evaluate the effect of various parameters such as power amplifiers efficiency, number of antennas as well as different coherence times of the RF and the FSO links on the system performance. Finally, we present mappings between the performance of RF- FSO multi-hop networks and the ones using only the RF- or the FSO-based communication, in the sense that with appropriate parameter settings the same outage probability is achieved in these setups. The results show the efficiency of the RF-FSO setups in different conditions. Moreover, the HARQ can effectively improve the outage probability/energy efficiency, and compensate the effect of hardware impairments in RF-FSO networks. For common parameter settings of the RF-FSO dual- hop networks, outage probability 10^{-4} and code rate 3 nats-per-channel-use, the implementation of HARQ with a maximum of 2 and 3 retransmissions reduces the required power, compared to the cases with no HARQ, by 13 and 17 dB, respectively.

  20. Experiences With an Optimal Estimation Algorithm for Surface and Atmospheric Parameter Retrieval From Passive Microwave Data in the Arctic

    DEFF Research Database (Denmark)

    Scarlat, Raul Cristian; Heygster, Georg; Pedersen, Leif Toudal


    the brightness temperatures observed by a passive microwave radiometer. The retrieval method inverts the forward model and produces ensembles of the seven parameters, wind speed, integrated water vapor, liquid water path, sea and ice temperature, sea ice concentration and multiyear ice fraction. The method...... compared with the Arctic Systems Reanalysis model data as well as columnar water vapor retrieved from satellite microwave sounders and the Remote Sensing Systems AMSR-E ocean retrieval product in order to determine the feasibility of using the same setup over pure surface with 100% and 0% sea ice cover......, respectively. Sea ice concentration retrieval shows good skill for pure surface cases. Ice types retrieval is in good agreement with scatterometer backscatter data. Deficiencies have been identified in using the forward model over sea ice for retrieving atmospheric parameters, that are connected...

  1. An Algorithm for the Retrieval of 30-m Snow-Free Albedo from Landsat Surface Reflectance and MODIS BRDF (United States)

    Shuai, Yanmin; Masek, Jeffrey G.; Gao, Feng; Schaaf, Crystal B.


    We present a new methodology to generate 30-m resolution land surface albedo using Landsat surface reflectance and anisotropy information from concurrent MODIS 500-m observations. Albedo information at fine spatial resolution is particularly useful for quantifying climate impacts associated with land use change and ecosystem disturbance. The derived white-sky and black-sky spectral albedos maybe used to estimate actual spectral albedos by taking into account the proportion of direct and diffuse solar radiation arriving at the ground. A further spectral-to-broadband conversion based on extensive radiative transfer simulations is applied to produce the broadband albedos at visible, near infrared, and shortwave regimes. The accuracy of this approach has been evaluated using 270 Landsat scenes covering six field stations supported by the SURFace RADiation Budget Network (SURFRAD) and Atmospheric Radiation Measurement Southern Great Plains (ARM/SGP) network. Comparison with field measurements shows that Landsat 30-m snow-free shortwave albedos from all seasons generally achieve an absolute accuracy of +/-0.02 - 0.05 for these validation sites during available clear days in 2003-2005,with a root mean square error less than 0.03 and a bias less than 0.02. This level of accuracy has been regarded as sufficient for driving global and regional climate models. The Landsat-based retrievals have also been compared to the operational 16-day MODIS albedo produced every 8-days from MODIS on Terra and Aqua (MCD43A). The Landsat albedo provides more detailed landscape texture, and achieves better agreement (correlation and dynamic range) with in-situ data at the validation stations, particularly when the stations include a heterogeneous mix of surface covers.

  2. An algorithm for calculating unsteady flow with free surface; Ein Verfahren zur Berechnung instationaerer Stroemungen mit freier Oberflaeche

    Energy Technology Data Exchange (ETDEWEB)

    Janetzky, B.


    A numerical model for the transient, free surface flow is implemented in a Finite-Element program for the unsteady calculation of incompressible flow with free surface. The program is used to calculate the flow in different components of a hydraulic turbine, the Pelton turbine. The movement of the fluid with free surface is described mathematically by introducing a partial differential equation for the volume fraction. This equation is simply a transport equation for f, i.e. the volume fraction is advected with the flow in time. The equations is solved numerically. (orig.) [German] Es wird ein Verfahren zur Modellierung von veraenderlichen, freien Oberflaechen vorgestellt und in einem Finite-Elemente-Programm zur numerischen Berechnung von instationaeren, inkompressiblen Stroemungen implementiert. Die veraenderliche, freie Oberflaeche wird mit einem Volume-Of-Fluid Ansatz erfasst. Zur Approximierung der freien Oberflaeche werden stueckweise konstante oder gestufte Verlaeufe im Element angesetzt. Es werden die Eigenschaften des Verfahrens an ausgewaehlten Beispielen mit freier Oberflaeche untersucht. Das erweiterte Programm wird auf instationaere Stroemungen mit freier Oberflaeche in einer hydraulischen Maschine, der Peltonturbine, angewandt. (orig.)

  3. Optimisation of warpage on plastic injection moulding part using response surface methodology (RSM) and genetic algorithm method (GA) (United States)

    Miza, A. T. N. A.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Hazwan, M. H. M.


    In this study, Computer Aided Engineering was used for injection moulding simulation. The method of Design of experiment (DOE) was utilize according to the Latin Square orthogonal array. The relationship between the injection moulding parameters and warpage were identify based on the experimental data that used. Response Surface Methodology (RSM) was used as to validate the model accuracy. Then, the RSM and GA method were combine as to examine the optimum injection moulding process parameter. Therefore the optimisation of injection moulding is largely improve and the result shown an increasing accuracy and also reliability. The propose method by combining RSM and GA method also contribute in minimising the warpage from occur.

  4. Radar Coincidence Imaging for Off-Grid Target Using Frequency-Hopping Waveforms

    Directory of Open Access Journals (Sweden)

    Xiaoli Zhou


    Full Text Available Radar coincidence imaging (RCI is a high-resolution staring imaging technique without the limitation of the target relative motion. To achieve better imaging performance, sparse reconstruction is commonly used. While its performance is based on the assumption that the scatterers are located at the prediscretized grid-cell centers, otherwise, off-grid emerges and the performance of RCI degrades significantly. In this paper, RCI using frequency-hopping (FH waveforms is considered. The off-grid effects are analyzed, and the corresponding constrained Cramér-Rao bound (CCRB is derived based on the mean square error (MSE of the “oracle” estimator. For off-grid RCI, the process is composed of two stages: grid matching and off-grid error (OGE calibration, where two-dimension (2D band-excluded locally optimized orthogonal matching pursuit (BLOOMP and alternating iteration minimization (AIM algorithms are proposed, respectively. Unlike traditional sparse recovery methods, BLOOMP realizes the recovery in the refinement grids by overwhelming the shortages of coherent dictionary and is robust to noise and OGE. AIM calibration algorithm adaptively adjusts the OGE and, meanwhile, seeks the optimal target reconstruction result.

  5. «Hip hop culture»: a review of its potential as an educational tool

    Directory of Open Access Journals (Sweden)



    Full Text Available  This paper reviews the meaning of «hip hop culture» as a contemporary musical phenomenon, and how rap is a feature of the social and educational activities aimed at youth. The purpose of it is to show the evolution of hip hop, its agents, its practices, and its relationship with the world of the music industry and cultural action.It provides useful information on the contents of the Spanish rap lyrics that have been analyzed to check the messages transmitted, the ideas and references to the precepts legitimized in «hip hop culture». This is an approach to the idea that hip hop is a means of expression of social concerns and values that identify the hip hop culture. So, this study aims to provide a better knowledge of some educational experiences that have used hip hop as a tool to promote change in neighbourhoods, social groups or youth groups.

  6. Droppin’ Knowledge on Race: Hip-Hop, White Adolescents, and Anti-Racism Education

    Directory of Open Access Journals (Sweden)

    Steven Netcoh


    Full Text Available In this essay, the author examines how Hip-Hop can be mobilized in anti-racism educational initatives.  The author claims that existing research on Hip-Hop and white adolescents suggests a negative corrleation between white youths' engagement with Hip-Hop and their understanding of how race and racism function in American society.  In response to this research, the author argues Hip-Hop's diverse racial discourses and ideologies must be made the subject of direct and critical inquiry in secondary and post-secondary classrooms to maximize its democratic potential.  The author outlines specific approaches for how teachers can employ Hip-Hop in anti-racism curricula in secondary and post-secondary classrooms.  Collectively, the essay serves as a preliminary investigation of Hip-Hop pedagogies of race and whiteness.

  7. Blind Compressed Sensing Parameter Estimation of Non-cooperative Frequency Hopping Signal

    Directory of Open Access Journals (Sweden)

    Chen Ying


    Full Text Available To overcome the disadvantages of a non-cooperative frequency hopping communication system, such as a high sampling rate and inadequate prior information, parameter estimation based on Blind Compressed Sensing (BCS is proposed. The signal is precisely reconstructed by the alternating iteration of sparse coding and basis updating, and the hopping frequencies are directly estimated based on the results. Compared with conventional compressive sensing, blind compressed sensing does not require prior information of the frequency hopping signals; hence, it offers an effective solution to the inadequate prior information problem. In the proposed method, the signal is first modeled and then reconstructed by Orthonormal Block Diagonal Blind Compressed Sensing (OBD-BCS, and the hopping frequencies and hop period are finally estimated. The simulation results suggest that the proposed method can reconstruct and estimate the parameters of noncooperative frequency hopping signals with a low signal-to-noise ratio.

  8. Using memory-efficient algorithm for large-scale time-domain modeling of surface plasmon polaritons propagation in organic light emitting diodes (United States)

    Zakirov, Andrey; Belousov, Sergei; Valuev, Ilya; Levchenko, Vadim; Perepelkina, Anastasia; Zempo, Yasunari


    We demonstrate an efficient approach to numerical modeling of optical properties of large-scale structures with typical dimensions much greater than the wavelength of light. For this purpose, we use the finite-difference time-domain (FDTD) method enhanced with a memory efficient Locally Recursive non-Locally Asynchronous (LRnLA) algorithm called DiamondTorre and implemented for General Purpose Graphical Processing Units (GPGPU) architecture. We apply our approach to simulation of optical properties of organic light emitting diodes (OLEDs), which is an essential step in the process of designing OLEDs with improved efficiency. Specifically, we consider a problem of excitation and propagation of surface plasmon polaritons (SPPs) in a typical OLED, which is a challenging task given that SPP decay length can be about two orders of magnitude greater than the wavelength of excitation. We show that with our approach it is possible to extend the simulated volume size sufficiently so that SPP decay dynamics is accounted for. We further consider an OLED with periodically corrugated metallic cathode and show how the SPP decay length can be greatly reduced due to scattering off the corrugation. Ultimately, we compare the performance of our algorithm to the conventional FDTD and demonstrate that our approach can efficiently be used for large-scale FDTD simulations with the use of only a single GPGPU-powered workstation, which is not practically feasible with the conventional FDTD.

  9. Development of mathematical models and optimization of the process parameters of laser surface hardened EN25 steel using elitist non-dominated sorting genetic algorithm (United States)

    Vignesh, S.; Dinesh Babu, P.; Surya, G.; Dinesh, S.; Marimuthu, P.


    The ultimate goal of all production entities is to select the process parameters that would be of maximum strength, minimum wear and friction. The friction and wear are serious problems in most of the industries which are influenced by the working set of parameters, oxidation characteristics and mechanism involved in formation of wear. The experimental input parameters such as sliding distance, applied load, and temperature are utilized in finding out the optimized solution for achieving the desired output responses such as coefficient of friction, wear rate, and volume loss. The optimization is performed with the help of a novel method, Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II) based on an evolutionary algorithm. The regression equations obtained using Response Surface Methodology (RSM) are used in determining the optimum process parameters. Further, the results achieved through desirability approach in RSM are compared with that of the optimized solution obtained through NSGA-II. The results conclude that proposed evolutionary technique is much effective and faster than the desirability approach.

  10. Savage Vernacular: Performing Race, Memory, and Hip Hop in Filipino America


    Villegas, Mark


    By observing and analyzing live performances, music, visual art, interviews, television shows, and online discourse, this dissertation traces the ways in which Filipino American hip hop performance remembers the racialized histories of the Filipino body. Through both quotidian and spectacular performances in hip hop, Filipino Americans have been contributing to crucial forms of knowledge that help unpack the terms of Filipino and American culture. Hip hop culture, I argue, operates as a produ...

  11. Non-Invasive Fetal Monitoring: A Maternal Surface ECG Electrode Placement-Based Novel Approach for Optimization of Adaptive Filter Control Parameters Using the LMS and RLS Algorithms. (United States)

    Martinek, Radek; Kahankova, Radana; Nazeran, Homer; Konecny, Jaromir; Jezewski, Janusz; Janku, Petr; Bilik, Petr; Zidek, Jan; Nedoma, Jan; Fajkus, Marcel


    This paper is focused on the design, implementation and verification of a novel method for the optimization of the control parameters (such as step size μ and filter order N ) of LMS and RLS adaptive filters used for noninvasive fetal monitoring. The optimization algorithm is driven by considering the ECG electrode positions on the maternal body surface in improving the performance of these adaptive filters. The main criterion for optimal parameter selection was the Signal-to-Noise Ratio (SNR). We conducted experiments using signals supplied by the latest version of our LabVIEW-Based Multi-Channel Non-Invasive Abdominal Maternal-Fetal Electrocardiogram Signal Generator, which provides the flexibility and capability of modeling the principal distribution of maternal/fetal ECGs in the human body. Our novel algorithm enabled us to find the optimal settings of the adaptive filters based on maternal surface ECG electrode placements. The experimental results further confirmed the theoretical assumption that the optimal settings of these adaptive filters are dependent on the ECG electrode positions on the maternal body, and therefore, we were able to achieve far better results than without the use of optimization. These improvements in turn could lead to a more accurate detection of fetal hypoxia. Consequently, our approach could offer the potential to be used in clinical practice to establish recommendations for standard electrode placement and find the optimal adaptive filter settings for extracting high quality fetal ECG signals for further processing. Ultimately, diagnostic-grade fetal ECG signals would ensure the reliable detection of fetal hypoxia.

  12. Investigation on multi-objective performance optimization algorithm application of fan based on response surface method and entropy method (United States)

    Zhang, Li; Wu, Kexin; Liu, Yang


    A multi-objective performance optimization method is proposed, and the problem that single structural parameters of small fan balance the optimization between the static characteristics and the aerodynamic noise is solved. In this method, three structural parameters are selected as the optimization variables. Besides, the static pressure efficiency and the aerodynamic noise of the fan are regarded as the multi-objective performance. Furthermore, the response surface method and the entropy method are used to establish the optimization function between the optimization variables and the multi-objective performances. Finally, the optimized model is found when the optimization function reaches its maximum value. Experimental data shows that the optimized model not only enhances the static characteristics of the fan but also obviously reduces the noise. The results of the study will provide some reference for the optimization of multi-objective performance of other types of rotating machinery.

  13. Animal galloping and human hopping: an energetics and biomechanics laboratory exercise. (United States)

    Lindstedt, Stan L; Mineo, Patrick M; Schaeffer, Paul J


    This laboratory exercise demonstrates fundamental principles of mammalian locomotion. It provides opportunities to interrogate aspects of locomotion from biomechanics to energetics to body size scaling. It has the added benefit of having results with robust signal to noise so that students will have success even if not "meticulous" in attention to detail. First, using respirometry, students measure the energetic cost of hopping at a "preferred" hop frequency. This is followed by hopping at an imposed frequency half of the preferred. By measuring the O2 uptake and work done with each hop, students calculate mechanical efficiency. Lessons learned from this laboratory include 1) that the metabolic cost per hop at half of the preferred frequency is nearly double the cost at the preferred frequency; 2) that when a person is forced to hop at half of their preferred frequency, the mechanical efficiency is nearly that predicted for muscle but is much higher at the preferred frequency; 3) that the preferred hop frequency is strongly body size dependent; and 4) that the hop frequency of a human is nearly identical to the galloping frequency predicted for a quadruped of our size. Together, these exercises demonstrate that humans store and recover elastic recoil potential energy when hopping but that energetic savings are highly frequency dependent. This stride frequency is dependent on body size such that frequency is likely chosen to maximize this function. Finally, by requiring students to make quantitative solutions using appropriate units and dimensions of the physical variables, these exercises sharpen analytic and quantitative skills.

  14. A Review of Hip Hop-Based Interventions for Health Literacy, Health Behaviors, and Mental Health. (United States)

    Robinson, Cendrine; Seaman, Elizabeth L; Montgomery, LaTrice; Winfrey, Adia


    African-American children and adolescents experience an undue burden of disease for many health outcomes compared to their White peers. More research needs to be completed for this priority population to improve their health outcomes and ameliorate health disparities. Integrating hip hop music or hip hop dance into interventions may help engage African-American youth in health interventions and improve their health outcomes. We conducted a review of the literature to characterize hip hop interventions and determine their potential to improve health. We searched Web of Science, Scopus, PsycINFO, and EMBASE to identify studies that assessed hip hop interventions. To be included, studies had to (1) be focused on a psychosocial or physical health intervention that included hip hop and (2) present quantitative data assessing intervention outcomes. Twenty-three articles were identified as meeting all inclusion criteria and were coded by two reviewers. Articles were assessed with regards to sample characteristics, study design, analysis, intervention components, and results. Hip hop interventions have been developed to improve health literacy, health behavior, and mental health. The interventions were primarily targeted to African-American and Latino children and adolescents. Many of the health literacy and mental health studies used non-experimental study designs. Among the 12 (of 14) health behavior studies that used experimental designs, the association between hip hop interventions and positive health outcomes was inconsistent. The number of experimental hip hop intervention studies is limited. Future research is required to determine if hip hop interventions can promote health.

  15. Decoherence and mode hopping in a magnetic tunnel junction based spin torque oscillator. (United States)

    Muduli, P K; Heinonen, O G; Akerman, Johan


    We discuss the coherence of magnetic oscillations in a magnetic tunnel junction based spin torque oscillator as a function of the external field angle. Time-frequency analysis shows mode hopping between distinct oscillator modes, which arises from linear and nonlinear couplings in the Landau-Lifshitz-Gilbert equation, analogous to mode hopping observed in semiconductor ring lasers. These couplings and, therefore, mode hopping are minimized near the current threshold for the antiparallel alignment of free-layer with reference layer magnetization. Away from the antiparallel alignment, mode hopping limits oscillator coherence.

  16. Hip-hop as a resource for understanding the urban context (United States)

    Brown, Bryan


    This review explores Edmin's "Science education for the hip-hop generation" by documenting how he frames hip-hop as a means to access urban student culture. He argues that hip-hop is more than a mere music genre, but rather a culture that provides young people with ways of connecting to the world. Two primary ideas emerged as central to his work. First, he contends that students develop communal relationships and collective identities based on the common experiences expressed in hip-hop. Second, he identifies how the conscious recognition of institutional oppression serves a central feature in urban schools. Emdin's rich, and personal call for a greater understanding of hip-hop culture provides the text with an unmatched strength. He skillfully uses personal narratives from his own experience as well as quotes and references from hip-hop songs to make the nuances of hip hop transparent to science educators. Conversely, the limitation of this text is found in its unfulfilled promise to provide pragmatic examples of how to engage in a hip-hop based science education. Emdin's work is ultimately valuable as it extends our current knowledge about urban students and hip-hop in meaningful ways.

  17. The politics of the cipher: hip-hop, antiphony, and multiculturalism


    Ganesh, B.


    This project explores the incipient forms of multiculture present in the musical publics assembled by hip-hop music and culture based on ethnography of a university student group, S4HH (Students for Hip-hop). I position the cipher (a circle of people rapping together) as the diagram of the ethics and politics of hip-hop listening. The primary aesthetic feature of the cipher is antiphony or call-and-response musicality. However, affect in hip-hop musical publics goes beyond aesthetics; it cata...

  18. Antifeedant activity of xanthohumol and supercritical carbon dioxide extract of spent hops against stored product pests. (United States)

    Jackowski, J; Hurej, M; Rój, E; Popłoński, J; Kośny, L; Huszcza, E


    Xanthohumol, a prenylated flavonoid from hops, and a supercritical carbon dioxide extract of spent hops were studied for their antifeedant activity against stored product insect pests: Sitophilus granarius L., Tribolium confusum Duv. and Trogoderma granarium Everts. Xanthohumol exhibited medium deterrent activity against the adults of S. granarius L. and larvae of T. confusum Duv. The spent hops extract was more active than xanthohumol towards the adults of T. confusum Duv. The potential application of the crude spent hops extract as a feeding deterrent against the stored product pests is proposed.

  19. Model-based surface soil moisture (SSM) retrieval algorithm using multi-temporal RISAT-1 C-band SAR data (United States)

    Pandey, Dharmendra K.; Maity, Saroj; Bhattacharya, Bimal; Misra, Arundhati


    Accurate measurement of surface soil moisture of bare and vegetation covered soil over agricultural field and monitoring the changes in surface soil moisture is vital for estimation for managing and mitigating risk to agricultural crop, which requires information and knowledge to assess risk potential and implement risk reduction strategies and deliver essential responses. The empirical and semi-empirical model-based soil moisture inversion approach developed in the past are either sensor or region specific, vegetation type specific or have limited validity range, and have limited scope to explain physical scattering processes. Hence, there is need for more robust, physical polarimetric radar backscatter model-based retrieval methods, which are sensor and location independent and have wide range of validity over soil properties. In the present study, Integral Equation Model (IEM) and Vector Radiative Transfer (VRT) model were used to simulate averaged backscatter coefficients in various soil moisture (dry, moist and wet soil), soil roughness (smooth to very rough) and crop conditions (low to high vegetation water contents) over selected regions of Gujarat state of India and the results were compared with multi-temporal Radar Imaging Satellite-1 (RISAT-1) C-band Synthetic Aperture Radar (SAR) data in σ°HH and σ°HV polarizations, in sync with on field measured soil and crop conditions. High correlations were observed between RISAT-1 HH and HV with model simulated σ°HH & σ°HV based on field measured soil with the coefficient of determination R2 varying from 0.84 to 0.77 and RMSE varying from 0.94 dB to 2.1 dB for bare soil. Whereas in case of winter wheat crop, coefficient of determination R2 varying from 0.84 to 0.79 and RMSE varying from 0.87 dB to 1.34 dB, corresponding to with vegetation water content values up to 3.4 kg/m2. Artificial Neural Network (ANN) methods were adopted for model-based soil moisture inversion. The training datasets for the NNs were

  20. Surface states in crystals with low-index surfaces

    International Nuclear Information System (INIS)

    Wang Hui-Ping; Tao Rui-Bao


    For most of the conventional crystals with low-index surfaces, the hopping between the nearest neighbor (1NN) crystal planes (CPs) is dominant and the ones from the nNN (2 ≤ n < ∞) CPs are relatively weak, considered as small perturbations. The recent theoretical analysis [1] has demonstrated the absence of surface states at the level of the hopping approximation between the 1NN CPs when the original infinite crystal has the geometric reflection symmetry (GRS) for each CP. Meanwhile, based on the perturbation theory, it has also been shown that small perturbations from the hopping between the nNN (2 ≤ n < ∞) CPs and surface relaxation have no impact on the above conclusion. However, for the crystals with strong intrinsic spin-orbit coupling (SOC), the dominant terms of intrinsic SOC associate with two 1NN bond hoppings. Thus SOC will significantly contribute the hoppings from the 1NN and/or 2NN CPs except the ones within each CP. Here, we will study the effect of the hopping between the 2NN CPs on the surface states in model crystals with three different type structures (Type I: “···–P–P–P–P–···”, Type II: “···–P–Q–P–Q–···” and Type III: “···–P=Q–P=Q–···” where P and Q indicate CPs and the signs “−” and “=” mark the distance between the 1NN CPs). In terms of analytical and numerical calculations, we study the behavior of surface states in three types after the symmetric/asymmetric hopping from the 2NN CPs is added. We analytically prove that the symmetric hopping from the 2NN CPs cannot induce surface states in Type I when each CP has only one electron mode. The numerical calculations also provide strong support for the conclusion, even up to 5NN. However, in general, the coupling from the 2NN CPs (symmetric and asymmetric) is favorable to generate surface states except Type I with single electron mode only. (paper)

  1. Efficient DV-HOP Localization for Wireless Cyber-Physical Social Sensing System: A Correntropy-Based Neural Network Learning Scheme

    Directory of Open Access Journals (Sweden)

    Yang Xu


    Full Text Available Integrating wireless sensor network (WSN into the emerging computing paradigm, e.g., cyber-physical social sensing (CPSS, has witnessed a growing interest, and WSN can serve as a social network while receiving more attention from the social computing research field. Then, the localization of sensor nodes has become an essential requirement for many applications over WSN. Meanwhile, the localization information of unknown nodes has strongly affected the performance of WSN. The received signal strength indication (RSSI as a typical range-based algorithm for positioning sensor nodes in WSN could achieve accurate location with hardware saving, but is sensitive to environmental noises. Moreover, the original distance vector hop (DV-HOP as an important range-free localization algorithm is simple, inexpensive and not related to the environment factors, but performs poorly when lacking anchor nodes. Motivated by these, various improved DV-HOP schemes with RSSI have been introduced, and we present a new neural network (NN-based node localization scheme, named RHOP-ELM-RCC, through the use of DV-HOP, RSSI and a regularized correntropy criterion (RCC-based extreme learning machine (ELM algorithm (ELM-RCC. Firstly, the proposed scheme employs both RSSI and DV-HOP to evaluate the distances between nodes to enhance the accuracy of distance estimation at a reasonable cost. Then, with the help of ELM featured with a fast learning speed with a good generalization performance and minimal human intervention, a single hidden layer feedforward network (SLFN on the basis of ELM-RCC is used to implement the optimization task for obtaining the location of unknown nodes. Since the RSSI may be influenced by the environmental noises and may bring estimation error, the RCC instead of the mean square error (MSE estimation, which is sensitive to noises, is exploited in ELM. Hence, it may make the estimation more robust against outliers. Additionally, the least square

  2. Efficient DV-HOP Localization for Wireless Cyber-Physical Social Sensing System: A Correntropy-Based Neural Network Learning Scheme. (United States)

    Xu, Yang; Luo, Xiong; Wang, Weiping; Zhao, Wenbing


    Integrating wireless sensor network (WSN) into the emerging computing paradigm, e.g., cyber-physical social sensing (CPSS), has witnessed a growing interest, and WSN can serve as a social network while receiving more attention from the social computing research field. Then, the localization of sensor nodes has become an essential requirement for many applications over WSN. Meanwhile, the localization information of unknown nodes has strongly affected the performance of WSN. The received signal strength indication (RSSI) as a typical range-based algorithm for positioning sensor nodes in WSN could achieve accurate location with hardware saving, but is sensitive to environmental noises. Moreover, the original distance vector hop (DV-HOP) as an important range-free localization algorithm is simple, inexpensive and not related to the environment factors, but performs poorly when lacking anchor nodes. Motivated by these, various improved DV-HOP schemes with RSSI have been introduced, and we present a new neural network (NN)-based node localization scheme, named RHOP-ELM-RCC, through the use of DV-HOP, RSSI and a regularized correntropy criterion (RCC)-based extreme learning machine (ELM) algorithm (ELM-RCC). Firstly, the proposed scheme employs both RSSI and DV-HOP to evaluate the distances between nodes to enhance the accuracy of distance estimation at a reasonable cost. Then, with the help of ELM featured with a fast learning speed with a good generalization performance and minimal human intervention, a single hidden layer feedforward network (SLFN) on the basis of ELM-RCC is used to implement the optimization task for obtaining the location of unknown nodes. Since the RSSI may be influenced by the environmental noises and may bring estimation error, the RCC instead of the mean square error (MSE) estimation, which is sensitive to noises, is exploited in ELM. Hence, it may make the estimation more robust against outliers. Additionally, the least square estimation (LSE

  3. Fast algorithm for Morphological Filters

    International Nuclear Information System (INIS)

    Lou Shan; Jiang Xiangqian; Scott, Paul J


    In surface metrology, morphological filters, which evolved from the envelope filtering system (E-system) work well for functional prediction of surface finish in the analysis of surfaces in contact. The naive algorithms are time consuming, especially for areal data, and not generally adopted in real practice. A fast algorithm is proposed based on the alpha shape. The hull obtained by rolling the alpha ball is equivalent to the morphological opening/closing in theory. The algorithm depends on Delaunay triangulation with time complexity O(nlogn). In comparison to the naive algorithms it generates the opening and closing envelope without combining dilation and erosion. Edge distortion is corrected by reflective padding for open profiles/surfaces. Spikes in the sample data are detected and points interpolated to prevent singularities. The proposed algorithm works well both for morphological profile and area filters. Examples are presented to demonstrate the validity and superiority on efficiency of this algorithm over the naive algorithm.

  4. A Practical Split-Window Algorithm for Retrieving Land Surface Temperature from Landsat-8 Data and a Case Study of an Urban Area in China

    Directory of Open Access Journals (Sweden)

    Meijun Jin


    Full Text Available This paper proposes a practical split-window algorithm (SWA for retrieving land surface temperature (LST from Landsat-8 Thermal Infrared Sensor (TIRS data. This SWA has a universal applicability and a set of parameters that can be applied when retrieving LSTs year-round. The atmospheric transmittance and the land surface emissivity (LSE, the essential SWA input parameters, of the Landsat-8 TIRS data are determined in this paper. We also analysed the error sensitivity of these SWA input parameters. The accuracy evaluation of the proposed SWA in this paper was conducted using the software MODTRAN 4.0. The root mean square error (RMSE of the simulated LST using the mid-latitude summer atmospheric profile is 0.51 K, improving on the result of 0.93 K from Rozenstein (2014. Among the 90 simulated data points, the maximum absolute error is 0.99 °C, and the minimum absolute error is 0.02 °C. Under the Tropical model and 1976 US standard atmospheric conditions, the RMSE of the LST errors are 0.70 K and 0.63 K, respectively. The accuracy results indicate that the SWA provides an LST retrieval method that features not only high accuracy but also a certain universality. Additionally, the SWA was applied to retrieve the LST of an urban area using two Landsat-8 images. The SWA presented in this paper should promote the application of Landsat-8 data in the study of environmental evolution.

  5. Child-Mediated Stroke Communication: findings from Hip Hop Stroke. (United States)

    Williams, Olajide; DeSorbo, Alexandra; Noble, James; Gerin, William


    Low thrombolysis rates for acute ischemic stroke are linked to delays in seeking immediate treatment due to low public stroke awareness. We aimed to assess whether "Child-Mediated Stroke Communication" could improve stroke literacy of parents of children enrolled in a school-based stroke literacy program called Hip Hop Stroke. Parents of children aged 9 to 12 years from 2 public schools in Harlem, New York City, were recruited to participate in stroke literacy questionnaires before and after their child's participation in Hip Hop Stroke, a novel Child-Mediated Stroke Communication intervention delivered in school auditoriums. Parental recall of stroke information communicated through their child was assessed 1-week after the intervention. Fifth and sixth grade students (n=182) were enrolled into Hip Hop Stroke. One hundred two parents were approached in person to participate; 75 opted to participate and 71 completed both the pretest and post-test (74% response rate and 95% retention rate). Parental stroke literacy improved after the program; before the program, 3 parents of 75 (3.9%) were able to identify the 5 cardinal stroke symptoms, distracting symptom (chest pains), and had an urgent action plan (calling 911) compared with 21 of 71 parents (29.6%) postintervention (P<0.001). The FAST mnemonic was known by 2 (2.7%) of participants before the program versus 29 (41%) after program completion (P<0.001). Knowledge of stroke signs and symptoms remains low among residents of this high-risk population. The use of Child-Mediated Stroke Communication suggests that school children aged 9 to 12 years may be effective conduits of critical stroke knowledge to their parents.

  6. Study of Exciton Hopping Transport in PbS Colloidal Quantum Dot Thin Films Using Frequency- and Temperature-Scanned Photocarrier Radiometry (United States)

    Hu, Lilei; Mandelis, Andreas; Melnikov, Alexander; Lan, Xinzheng; Hoogland, Sjoerd; Sargent, Edward H.


    Solution-processed colloidal quantum dots (CQDs) are promising materials for realizing low-cost, large-area, and flexible photovoltaic devices. The study of charge carrier transport in quantum dot solids is essential for understanding energy conversion mechanisms. Recently, solution-processed two-layer oleic-acid-capped PbS CQD solar cells with one layer treated with tetrabutylammonium iodide (TBAI) serving as the main light-absorbing layer and the other treated with 1,2-ethanedithiol (EDT) acting as an electron-blocking/hole-extraction layer were reported. These solar cells demonstrated a significant improvement in power conversion efficiency of 8.55% and long-term air stability. Coupled with photocarrier radiometry measurements, this work used a new trap-state mediated exciton hopping transport model, specifically for CQD thin films, to unveil and quantify exciton transport mechanisms through the extraction of hopping transport parameters including exciton lifetimes, hopping diffusivity, exciton detrapping time, and trap-state density. It is shown that PbS-TBAI has higher trap-state density than PbS-EDT that results in higher PbS-EDT exciton lifetimes. Hopping diffusivities of both CQD thin film types show similar temperature dependence, particularly higher temperatures yield higher hopping diffusivity. The higher diffusivity of PbS-TBAI compared with PbS-EDT indicates that PbS-TBAI is a much better photovoltaic material than PbS-EDT. Furthermore, PCR temperature spectra and deep-level photothermal spectroscopy provided additional insights to CQD surface trap states: PbS-TBAI thin films exhibit a single dominant trap level, while PbS-EDT films with lower trap-state densities show multiple trap levels.

  7. Anisotropy of hopping conductivity in TIGaSe2, crystal

    International Nuclear Information System (INIS)

    Nadjafov, A.I.; Sardarli, R.M.; Samedov, O. A.; Abdullayev, A.P.; Zeynalova, E.A.; Jabbarov, J.H.


    Full Text: The temperature dependences of electrical conductivity of a chained semiconductor crystal TIGaTe 2 in a direction of chains and perpendicularly have been investigated. It was established that in a constant electrical field in both crystallographic directions took place hopping conductivity with variable length of a jump on located near Fermi level. The energy activation of conductivity has been determined. It was appreciated density of a condition in a vicinity of a Fermi level, their disorder, radius of localization, average distance of jumps of carriers

  8. Electron hopping and optic phonons in Eu3S4

    International Nuclear Information System (INIS)

    Guentherodt, G.


    Raman scattering on single crystals of Eu 3 S 4 does not show the allowed q=o phonon modes in the cubic phase and exhibits no new modes in the distorted low temperature phase (T 2- ions. This mode does not show any anomaly near the charge order -disorder phase transition Tsub(t)=186 K. Temperature tunable spin fluctuations associated with the temperature activated Eu 2+ → Eu 3+ electron hopping are detected in the scattering intensity, superimposed on the usual thermal spin disorder. (author)

  9. Conscious Hip-Hop, Change, and the Obama Era

    Directory of Open Access Journals (Sweden)

    Murray Forman


    Full Text Available This article identifies a particular aspect of hip-hop’s range of cultural production—conscious rap—in order to isolate one of the more politicized discursive options available to youth in America and a site where critical perspectives on post-Civil Rights America have emerged most forcefully. It further suggests that Obama’s political rise corresponds with a new phase in hip-hop and has impacted the ways in which its creative artists frame and articulate issues of race, class, and identity.

  10. Anomalous Flux Quantization in a Hubbard Ring with Correlated Hopping (United States)

    Arrachea, Liliana; Aligia, A. A.; Gagliano, E.


    We solve exactly a generalized Hubbard ring with twisted boundary conditions. The magnitude of the nearest-neighbor hopping depends on the occupations of the sites involved and the term which modifies the number of doubly occupied sites tAB = 0. Although η-pairing states with off-diagonal long-range order are part of the degenerate ground state, the behavior of the energy as a function of the twist rules out superconductivity in this limit. A small tAB breaks the degeneracy and for moderate repulsive U introduce superconducting correlations which lead to ``anomalous'' flux quantization.

  11. Role of polaron hopping in leakage current behavior of a SrTiO{sub 3} single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Y., E-mail:; Randall, C. A.; Chen, L. Q. [Department of Materials Science and Engineering, Penn State University, University Park, Pennsylvania 16802 (United States); Bhattacharya, S. [Department of Materials Science and Engineering, Indian Institute of Technology Hyderabad, YM 502205 (India); Shen, J. [Department of Mathematics, Purdue University, West Lafayette, Indiana 47907 (United States)


    We studied the ionic/electronic transport and resistance degradation behavior of dielectric oxides by solving the electrochemical transport equations. Here, we took into account the non-periodical boundary conditions for the transport equations using the Chebyshev collocation algorithm. A sandwiched Ni|SrTiO{sub 3}|Ni capacitor is considered as an example under the condition of 1.0 V, 1.0 μm thickness for SrTiO{sub 3} layer, and a temperature of 150 °C. The applied voltage resulted in the migration of ionic defects (oxygen vacancies) from anode towards cathode. The simulated electric potential profile at steady state is in good agreement with the recent experimental observation. We introduced the possibility of polaron-hopping between Ti{sup 3+} and Ti{sup 4+} at the electrode interface. It is shown that both the oxygen vacancy transport and the polaron-hopping contribute to the resistance degradation of single crystal SrTiO{sub 3}, which is consistent with the experimental observations.

  12. Surface temperature dataset for North America obtained by application of optimal interpolation algorithm merging tree-ring chronologies and climate model output (United States)

    Chen, Xin; Xing, Pei; Luo, Yong; Nie, Suping; Zhao, Zongci; Huang, Jianbin; Wang, Shaowu; Tian, Qinhua


    A new dataset of surface temperature over North America has been constructed by merging climate model results and empirical tree-ring data through the application of an optimal interpolation algorithm. Errors of both the Community Climate System Model version 4 (CCSM4) simulation and the tree-ring reconstruction were considered to optimize the combination of the two elements. Variance matching was used to reconstruct the surface temperature series. The model simulation provided the background field, and the error covariance matrix was estimated statistically using samples from the simulation results with a running 31-year window for each grid. Thus, the merging process could continue with a time-varying gain matrix. This merging method (MM) was tested using two types of experiment, and the results indicated that the standard deviation of errors was about 0.4 °C lower than the tree-ring reconstructions and about 0.5 °C lower than the model simulation. Because of internal variabilities and uncertainties in the external forcing data, the simulated decadal warm-cool periods were readjusted by the MM such that the decadal variability was more reliable (e.g., the 1940-1960s cooling). During the two centuries (1601-1800 AD) of the preindustrial period, the MM results revealed a compromised spatial pattern of the linear trend of surface temperature, which is in accordance with the phase transition of the Pacific decadal oscillation and Atlantic multidecadal oscillation. Compared with pure CCSM4 simulations, it was demonstrated that the MM brought a significant improvement to the decadal variability of the gridded temperature via the merging of temperature-sensitive tree-ring records.

  13. Improvements of a COMS Land Surface Temperature Retrieval Algorithm Based on the Temperature Lapse Rate and Water Vapor/Aerosol Effect

    Directory of Open Access Journals (Sweden)

    A-Ra Cho


    Full Text Available The National Meteorological Satellite Center in Korea retrieves land surface temperature (LST by applying the split-window LST algorithm (CSW_v1.0 to Communication, Ocean, and Meteorological Satellite (COMS data. Considerable errors were detected under conditions of high water vapor content or temperature lapse rates during validation with Moderate Resolution Imaging Spectroradiometer (MODIS LST because of the too simplified LST algorithm. In this study, six types of LST retrieval equations (CSW_v2.0 were developed to upgrade the CSW_v1.0. These methods were developed by classifying “dry,” “normal,” and “wet” cases for day and night and considering the relative sizes of brightness temperature difference (BTD values. Similar to CSW_v1.0, the LST retrieved by CSW_v2.0 had a correlation coefficient of 0.99 with the prescribed LST and a slightly larger bias of −0.03 K from 0.00K; the root mean square error (RMSE improved from 1.41 K to 1.39 K. In general, CSW_v2.0 improved the retrieval accuracy compared to CSW_v1.0, especially when the lapse rate was high (mid-day and dawn and the water vapor content was high. The spatial distributions of LST retrieved by CSW_v2.0 were found to be similar to the MODIS LST independently of the season, day/night, and geographic locations. The validation using one year’s MODIS LST data showed that CSW_v2.0 improved the retrieval accuracy of LST in terms of correlations (from 0.988 to 0.989, bias (from −1.009 K to 0.292 K, and RMSEs (from 2.613 K to 2.237 K.

  14. Algorithmic cryptanalysis

    CERN Document Server

    Joux, Antoine


    Illustrating the power of algorithms, Algorithmic Cryptanalysis describes algorithmic methods with cryptographically relevant examples. Focusing on both private- and public-key cryptographic algorithms, it presents each algorithm either as a textual description, in pseudo-code, or in a C code program.Divided into three parts, the book begins with a short introduction to cryptography and a background chapter on elementary number theory and algebra. It then moves on to algorithms, with each chapter in this section dedicated to a single topic and often illustrated with simple cryptographic applic

  15. A Multicomponent UV Analysis of ["alpha"]- and ["beta"]-Acids in Hops (United States)

    Egts, Haley; Durben, Dan J.; Dixson, John A.; Zehfus, Micheal H.


    A method is presented for the determination of ["alpha"]- and ["beta"]-acids (humulones and lupulones) in a hops sample using a multicomponent UV spectroscopic analysis of a methanolic hop extract. When compared with standard methods, this lab can be considered "greener" because it uses smaller volumes of safer solvents (methanol instead of…

  16. Sampling Practices and Social Spaces: Exploring a Hip-Hop Approach to Higher Education (United States)

    Petchauer, Emery


    Much more than a musical genre, hip-hop culture exists as an animating force in the lives of many young adults. This article looks beyond the moral concerns often associated with rap music to explore how hip-hop as a larger set of expressions and practices implicates the educational experiences, activities, and approaches for students. The article…

  17. Trends in German Hip Hop Music and Its Usefulness for the Classroom (United States)

    Schmidt, Johannes


    German hip hop music has proved productive, especially since 2000 when rap in Germany experienced something like a first crisis. As a response, German hip hop artists and record labels have ventured off in several different directions including other musical genres, different topics, and new approaches to German rap. This article discusses the…

  18. Membrane-bound ATPase contributes to hop resistance of Lactobacillus brevis

    NARCIS (Netherlands)

    Sakamoto, K; van Veen, HW; Saito, H; Kobayashi, H; Konings, WN


    The activity of the membrane-bound H+-ATPase of the beer spoilage bacterium Lactobacillus brevis ABBC45 increased upon adaptation to bacteriostatic hop compounds. The ATPase activity was optimal around pH 5.6 and increased up to fourfold when L. brevis was exposed to 666 muM hop compounds. The

  19. Hop acid-rich spent craft brewer's yeast modulates gut bacterial growth (United States)

    Alpha and beta hop acids (humulones and lupulones) from Humulus lupulus are inhibitors of Gram-positive organisms and important natural antibiotics for beer fermentation and carbohydrate feed stocks for biofuel production. Recent observations (Bryant and Cohen) of high levels of hop acids in spent ...

  20. Deal with It We Must: Education, Social Justice, and the Curriculum of Hip Hop Culture (United States)

    Baszile, Denise Taliaferro


    Although hip hop culture has been one of the most significant urban youth movements over the last three decades, it has only recently gained attention within the educational literature as a force to be reckoned with. And even then, much of the literature seeks to understand how hip hop can be used to engage students in the official school…

  1. Thermally assisted variable range hopping in Tl4S3Se crystal

    Indian Academy of Sciences (India)

    Abstract. In this study, a modified model for the application of the thermionic and hopping current conduction mechanisms in the presence of continuous mixed conduction is investigated, discussed, experimented and simulated. It is observed that there exists a contribution from the hopping conductivity to the total conduction ...

  2. Muziki wa Hip Hop na Haki Za Kijamii: Dhima, Changamoto na ...

    African Journals Online (AJOL)

    Ni dhahiri kuwa haki za kijamii zinaweza kuwasilishwa kwa jamii pana kupitia sanaa ya hip hop. Makala haya basi, yanabainisha dhima na mchango wa muziki wa hip hop katika masuala ya haki za kijamii, yanafafanua changamoto za muziki huu katika kuwasilisha haki za kijamii na kutoa mapendekezo kwa makundi ...

  3. Analysis of muscle activity and ankle joint movement during the side-hop test. (United States)

    Yoshida, Masahiro; Taniguchi, Keigo; Katayose, Masaki


    Functional performance tests (FPTs) that consist of movements, such as hopping, landing, and cutting, provide useful measurements. Although some tests have been established for kinematic studies of the knee joint, very few tests have been established for the ankle joint. To use the FPT as a test battery for patients with an ankle sprain, it is necessary to document typical patterns of muscle activation and range of motion (ROM) of the ankle joint during FPTs. Therefore, the purpose of this study was to investigate the pattern of the ROM of the ankle inversion/eversion and the muscle activity of the peroneus longus muscle (PL) and the tibial anterior muscle (TA) in normal subjects during the side-hop test. To emphasize the characteristics of ROM and electromyography (EMG) at each phase, the side-hop tests were divided into 4 phases: lateral-hop contact phase (LC), lateral-hop flight phase (LF), medial hop contact phase (MC), and medial hop flight phase (MF), and the ROM of ankle inversion/eversion, a peak angle of ankle inversion, and Integral EMG (IEMG) of PL and TA compared among 4 phases. Fifteen male subjects with no symptoms of ankle joint problems participated in this research. The ROM of ankle inversion/eversion during the side-hop test was 27 ± 3.8° (mean ± SD), and there was a significant difference in the ROM of ankle inversion/eversion among 4 phases (p sprain.

  4. Teaching Controversal Topics in Contemporary German Culture through Hip-Hop (United States)

    Putnam, Michael


    This article discusses the rich cultural resources embedded with German hip-hop music and its potential impact on the foreign language classroom. In particular, this article suggests methods and materials for integrating German hip-hop music in the discussion of recent controversial cultural events and attitudes in German after the "Wende."

  5. Affiliation and Alienation: Hip-Hop, Rap, and Urban Science Education (United States)

    Emdin, Christopher


    The critiques of rap artists and other participants in hip-hop culture provide data for teachers and researchers to investigate the attitudes of US urban youth towards schooling. This study explores the complex relationships between hip-hop and science education by examining how rap lyrics project beliefs about schooling, the relevance of existing…

  6. Hegemony, Hope, and the Harlem Renaissance: Taking Hip Hop Culture Seriously (United States)

    Price, Robert J., Jr.


    Adult education instructors and administrators, who typically are not members of the hip hop generation, often have little knowledge and understanding of rap music (also known as gangsta rap) and hip hop culture, and consequently do not take the black popular cultural phenomenon seriously as it relates to adult education. Adult educators,…

  7. We Can Relate: Hip-Hop Culture, Critical Pedagogy, and the Secondary Classroom (United States)

    Stovall, David


    This article seeks to locate hip-hop in the realm of popular culture in education. Through the use of song lyrics, the author suggests the use of rap music to provide context for the humanities and social sciences in secondary curriculum. Using a theoretical and practical lens, the article argues for the use of hip-hop and other elements of…

  8. Hip-Hop Culture in College Students' Lives: Elements, Embodiment, and Higher Edutainment (United States)

    Petchauer, Emery


    College campuses have become rich sites of hip-hop culture and knowledge production. Despite the attention that campus personnel and researchers have paid to student life, the field of higher education has often misunderstood the ways that hip-hop culture exists in college students' lives. Based upon in-depth interviews, observations of…

  9. Polish Hip Hop as a Form of Multiliteracies and Situated Learning (United States)

    Torrence, Michael L.


    The purpose of this ethnographic study was to examine Hip Hop in Poland through the lens of multiliteracies and situated learning. This analysis is concerned with the transmission of Hip Hop to and within Wroclaw, Poland, and its acculturation and assimilation in Wroclaw, Poland. Further, this study seeks to illustrate how professional Polish Hip…

  10. Supporting Communication and Argumentation in Urban Science Education: Hip-Hop, the Battle, and the Cypher (United States)

    Emdin, Christopher


    This paper is based on an exploration of communication and argumentation in urban science classrooms, and provides a description of the role that Hip-hop based education plays in supporting these major components of science education. The paper is intended to both support, and critique conventional uses of hip-hop based education, and provide…

  11. Empowerment in Context: Lessons from Hip-Hop Culture for Social Work Practice (United States)

    Travis, Raphael, Jr.; Deepak, Anne


    Hip-hop culture can be used as a conduit to enhanced cultural competence and practice skills through the individual and community empowerment framework. This framework is introduced as a tool for direct practice that allows social workers to understand the competing messages within hip-hop culture and how they may impact youths by promoting or…

  12. Hip-Hop and a Hybrid Text in a Postsecondary English Class (United States)

    Sanchez, Deborah M.


    This study explores the epistemology present in hip-hop music and its reflection in the writing of one African American student in a postsecondary transitional English class. An integration of hip-hop and academic literacy practices in the student's essay challenges the supremacy of a "standard" academic English and deficit perspectives about…

  13. Hip-Hop, Social Justice, and Environmental Education: Toward a Critical Ecological Literacy (United States)

    Cermak, Michael J.


    This essay describes an educational initiative that used environmentally themed (green) hip-hop to stimulate learning in an environmental science classroom. Students were then challenged to compose their own green hip-hop and their lyrics demonstrated skills that have thematic consistency around what is called a Critical Ecological Literacy (CEL).…

  14. Don't Believe the Hype: Hip-Hop Literacies and English Education (United States)

    Belle, Crystal


    Current scholarship suggests that many youths identify with hip-hop, especially youths of color. Study of this artistic form has been suggested as a means of helping youths acquire and become fluent in literacy practices. This article explores how the use of a hip-hop literacies curriculum addressed the literacy skills of urban ninth-grade English…

  15. Hip-Hop's Influence on the Identity Development of Black Female College Students: A Literature Review (United States)

    Henry, Wilma J.; West, Nicole M.; Jackson, Andrea


    This article explores unique issues regarding the effects of hip-hop culture on the identity development of young Black female college students. Through the lenses of womanist and Black feminist perspectives, the intersecting impact of race and gender are reviewed within the context of the competing influences of hip-hop on Black female identity.…

  16. We Got Next: Hip-Hop Pedagogy and the Next Generation of Democratic Education (United States)

    Dando, Michael


    Using daily experiences and existing identities as the subject matter, a hip-hop-centered class encourages students to develop a critical lens so that they can "envision a social order which supports their full humanity" (Shor, 1987, p. 48) and embraces the idea that hip-hop culture provides context for students to develop critical…

  17. Student Perceptions of the Hip Hop Culture's Influence on the Undergraduate Experience (United States)

    Wessel, Roger D.; Wallaert, Kerry A.


    This study sought to determine how identification and engagement with the hip hop culture influenced the educational experiences of undergraduate students at a Midwestern, predominately White university by interviewing 11 students who self-identified as being immersed in the hip hop culture. Through a qualitative, phenomenological investigation,…

  18. Hop/STI1 modulates retinal proliferation and cell death independent of PrPC

    International Nuclear Information System (INIS)

    Arruda-Carvalho, Maithe; Njaine, Brian; Silveira, Mariana S.; Linden, Rafael; Chiarini, Luciana B.


    Hop/STI1 is a co-chaperone adaptor protein for Hsp70/Hsp90 complexes. Hop/STI1 is found extracellularly and modulates cell death and differentiation through interaction with the prion protein (PrP C ). Here, we investigated the expression of hop/STI1 and its role upon cell proliferation and cell death in the developing retina. Hop/STI1 is more expressed in developing rat retina than in the mature tissue. Hop/STI1 blocks retinal cell death in the neuroblastic layer (NBL) in a PrP C dependent manner, but failed to protect ganglion cells against axotomy-induced cell death. An antibody raised against hop/STI1 (α-STI1) blocked both ganglion cell and NBL cell death independent of PrP C . cAMP/PKA, ERK, PI3K and PKC signaling pathways were not involved in these effects. Hop/STI1 treatment reduced proliferation, while α-STI1 increased proliferation in the developing retina, both independent of PrP C . We conclude that hop/STI1 can modulate both proliferation and cell death in the developing retina independent of PrP C

  19. Contributions to the quality control of two crops of economic importance : hops and yerba mate

    NARCIS (Netherlands)

    Wilson, Erica Georgina


    Quality control of plants is essential and at the same time very challenging.In this thesis, studies involving quality issues of two plants used in the production of two popular beverages, hops (in beer) and Ilex paraguariensis (yerba mate) were undertaken. Hops are used as bittering agents and to

  20. Effect of storage on the brewing properties of tropical hop substitutes

    African Journals Online (AJOL)



    Jun 18, 2007 ... Conclusively, tropical hop substitutes stored at 5 ± 1oC to 27 ± 1oC can still be used for brewing even after three to six months storage. .... which is associated with the oxidative depreciation of the soft resins to hard resins ... Changes in the soft resin levels of hop substitutes with storage. Soft resin levels (%).

  1. On the Capacity of a GSM Frequency Hopping network with Intelligent Underlayer-Overlayer

    DEFF Research Database (Denmark)

    Nielsen, Thomas Toftegaard; Wigard, Jeroen; Mogensen, Preben Elgaard


    . By combining this reuse partitioning with frequency hopping, an increase in the network capacity in terms of carried traffic per cell is achieved. Simulations have indicated that for slow moving mobiles a gain of approximately 35% is achieved by this new feature when compared with a frequency hopping network...

  2. Effect of doping Ca on polaron hopping in LaSr 2 Mn 2 O 7

    Indian Academy of Sciences (India)

    From the transport studies in the bilayer manganites LaSr2-CaMn2O7, we have found the variable-range hopping model proposed by Viret et al to be inadequate to describe the transport of charge in these materials. The polarons appear to hop to their nearest neighbors with an activation energy, which in part is ...

  3. Link and route availability for Inter-working multi-hop wireless networks

    CSIR Research Space (South Africa)

    Salami, O


    Full Text Available In inter-working multi-hop wireless networks, establishing resilient connectivity between source-destination node pairs is a major issue. The issue of connectivity in multi-hop wireless networks have been studied. However, these analyses focused...

  4. Hip-Hop as a Resource for Understanding the Urban Context: A Review of Christopher Edmin's--Science Education for the Hip-Hop Generation, Sense Publishers, Rotterdam, 2010 (United States)

    Brown, Bryan


    This review explores Edmin's "Science education for the hip-hop generation" by documenting how he frames hip-hop as a means to access urban student culture. He argues that hip-hop is more than a mere music genre, but rather a culture that provides young people with ways of connecting to the world. Two primary ideas emerged as central to…

  5. Clustering algorithm in initialization of multi-hop wireless sensor networks

    NARCIS (Netherlands)

    Guo, Peng; Tao, Jiang; Zhang, Kui; Chen, Hsiao-Hwa


    In most application scenarios of wireless sensor networks (WSN), sensor nodes are usually deployed randomly and do not have any knowledge about the network environment or even their ID's at the initial stage of their operations. In this paper, we address the clustering problems with a newly deployed

  6. The Communications Maintenance and Optimization Problem in Robotic Multi-hop Networks: Assumptions, Models, and Algorithms (United States)


    energy. An example of this is when an aerial vehicle like a quadrotor is used as a communications relay station. Since quadrotors are like helicopters...then the quadrotors may be driven to land somewhere, which may be suboptimal in terms of network metrics, but is much better in terms of energy

  7. Routing and Scheduling Algorithms in Resource-Limited Wireless Multi-Hop Networks

    National Research Council Canada - National Science Library

    Michail, Anastassios


    ...) to transmit their messages to the desired destinations. The distinguishing features of such all-wireless network architectures give rise to new trade-offs between traditional concerns in wireless communications...

  8. Hip-Hop to Health Jr. for Latino preschool children. (United States)

    Fitzgibbon, Marian L; Stolley, Melinda R; Schiffer, Linda; Van Horn, Linda; KauferChristoffel, Katherine; Dyer, Alan


    Hip-Hop to Health Jr. was a diet/physical activity intervention designed to reduce gains in BMI (kilograms per meter squared) in preschool minority children. Twelve predominantly Latino Head Start centers participated in a group-randomized trial conducted between Fall 2001 and Winter 2003. Six centers were randomized to a culturally proficient 14-week (three times weekly) diet/physical activity intervention. Parents participated by completing weekly homework assignments. The children in the other six centers received a general health intervention that did not address either diet or physical activity. The primary outcome was change in BMI, and secondary outcomes were changes in dietary intake and physical activity. Measures were collected at baseline, post-intervention, and at Years 1 and 2 follow-up. There were no significant differences between intervention and control schools in either primary or secondary outcomes at post-intervention, Year 1, or Year 2 follow-ups. When Hip-Hop to Health Jr. was conducted in predominantly black Head Start centers, it was effective in reducing subsequent increases in BMI in preschool children. In contrast, when the program was conducted in Latino centers, it was not effective. Although the intervention did not prevent excessive weight gain in Latino children, it was very well received. Future interventions with this population may require further cultural tailoring and a more robust parent intervention.

  9. OFDMA Cellular Networks with Opportunistic Two-Hop Relays

    Directory of Open Access Journals (Sweden)

    Calcev George


    Full Text Available We investigate the benefits of two-hop opportunistic relay in time division duplex (TDD OFDMA cellular network configurations. The paper starts with a short analytical model for the two-hop opportunistic relay. The model expresses the probability of finding a suitable relay node in the presence of lognormal fading and it allows the computation of the expected number of out-of-coverage nodes, as well as the end-to-end spectrum efficiency increase due to opportunistic relaying. The paper then presents results for Monte Carlo simulations of opportunistic relay in some realistic scenarios. Specifically, the simulations consider two scenarios. The first scenario uses the propagation model and a wide-area 19-cell configuration specified in 802.16 OFDMA cellular standard evaluation methodologies. In the second scenario, a Manhattan-like 19-cell topology is used. Our simulations show 11% to 33% in throughput increase when the opportunistic relay technology is used. Our results evaluate the benefits of the opportunistic relay in both scenarios in terms of coverage extension and throughput increase.

  10. Hopping system control with an approximated dynamics model and upper-body motion

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyang Jun; Oh, Jun Ho [KAIST, Daejeon (Korea, Republic of)


    A hopping system is highly non-linear due to the nature of its dynamics, which has alternating phases in a cycle, flight and stance phases and related transitions. Every control method that stabilizes the hopping system satisfies the Poincaré stability condition. At the Poincaré section, a hopping system cycle is considered as discrete sectional data set. By controlling the sectional data in a discrete control form, we can generate a stable hopping cycle. We utilize phase-mapping matrices to build a Poincaré return map by approximating the dynamics of the hopping system with SLIP model. We can generate various Poincaré stable gait patterns with the approximated discrete control form which uses upper-body motions as inputs.

  11. Throw Yo' Voice Out: Disability as a Desirable Practice in Hip-Hop Vocal Performance

    Directory of Open Access Journals (Sweden)

    Alex S. Porco


    Full Text Available Disabled bodies and disabling spaces— especially the recording studio— shape the sound iconicity of hip-hop vocal performances. The disabled voice is the audible sign by which hip-hop artists trouble cultural definitions of the self and other; exceptionalism and failure; the natural and techno-mediated; comedy and tragedy; and aesthetic play and seriousness. Hip-hop vocal performances also function as self-conscious acts of transvaluation that challenge the discursive dominance of ableism. A materialist approach to vocal performance resists reducing voice to a silent metaphor for race, oppositionality, or liberation; and it emphasizes, instead, the physiological and social processes that render hip-hop voices unique, particular, and audible. It emphasizes the agency hip-hop artists possess in seeking out disabled bodies and assuming disabled identities for aesthetic and political ends. Thus, the body is returned to the analysis of style.

  12. Structural elucidation of humulone autoxidation products and analysis of their occurrence in stored hops. (United States)

    Taniguchi, Yoshimasa; Taniguchi, Harumi; Matsukura, Yasuko; Kawachi, Yasuji; Shindo, Kazutoshi


    The transformation of α-acids [in hops (Humulus lupulus L.)] to iso-α-acids (in beer) during the brewing process is well known, but the occurrence and structure of the oxidized α-acids during hop storage are not well documented. Because an understanding of these oxidized compounds is essential to optimize the effects of oxidized hops on the quality of beer, we investigated the autoxidation products of humulone (a representative congener of α-acids) using a simplified autoxidation model. Among the oxidation products, tricyclooxyisohumulones A (1) and B (2), tricycloperoxyisohumulone A (3), deisopropyltricycloisohumulone (4), and the hemiacetal 5 of tricycloperoxyhumulone A (5') were isolated, and their structures were elucidated for the first time. The occurrence of compounds 1-4 in stored hops was verified using LC/MS/MS analysis. We also monitored the levels of compounds 1-4 during hop storage using LC/MS/MS analysis.

  13. Backoff-stage synchronization in three-hop string-topology wireless networks with hidden nodes (United States)

    Sanada, Kosuke; Sekiya, Hiroo; Komuro, Nobuyoshi; Sakata, Shiro

    In IEEE 802.11 wireless multi-hop networks, each node works individually and their individual operations generate entire network dynamics. It is important to clarify the network dynamics in wireless multi-hop networks for designing and constructing multi-hop communication networks. This paper presents the network-dynamics investigations for three-hop string-topology wireless network in detail. From the investigations, a “backoff-stage synchronization” phenomenon, which is mutuality between hidden nodes, is found. The mechanism of the backoff-stage synchronization is expressed and the sufficient conditions for the synchronization occurrence are given. This phenomenon gives some impacts on the IEEE 802.11 multi-hop-network communications.

  14. Algorithmic mathematics

    CERN Document Server

    Hougardy, Stefan


    Algorithms play an increasingly important role in nearly all fields of mathematics. This book allows readers to develop basic mathematical abilities, in particular those concerning the design and analysis of algorithms as well as their implementation. It presents not only fundamental algorithms like the sieve of Eratosthenes, the Euclidean algorithm, sorting algorithms, algorithms on graphs, and Gaussian elimination, but also discusses elementary data structures, basic graph theory, and numerical questions. In addition, it provides an introduction to programming and demonstrates in detail how to implement algorithms in C++. This textbook is suitable for students who are new to the subject and covers a basic mathematical lecture course, complementing traditional courses on analysis and linear algebra. Both authors have given this "Algorithmic Mathematics" course at the University of Bonn several times in recent years.

  15. Sensitivity of Satellite-Based Skin Temperature to Different Surface Emissivity and NWP Reanalysis Sources Demonstrated Using a Single-Channel, Viewing-Angle-Corrected Retrieval Algorithm (United States)

    Scarino, B. R.; Minnis, P.; Yost, C. R.; Chee, T.; Palikonda, R.


    Single-channel algorithms for satellite thermal-infrared- (TIR-) derived land and sea surface skin temperature (LST and SST) are advantageous in that they can be easily applied to a variety of satellite sensors. They can also accommodate decade-spanning instrument series, particularly for periods when split-window capabilities are not available. However, the benefit of one unified retrieval methodology for all sensors comes at the cost of critical sensitivity to surface emissivity (ɛs) and atmospheric transmittance estimation. It has been demonstrated that as little as 0.01 variance in ɛs can amount to more than a 0.5-K adjustment in retrieved LST values. Atmospheric transmittance requires calculations that employ vertical profiles of temperature and humidity from numerical weather prediction (NWP) models. Selection of a given NWP model can significantly affect LST and SST agreement relative to their respective validation sources. Thus, it is necessary to understand the accuracies of the retrievals for various NWP models to ensure the best LST/SST retrievals. The sensitivities of the single-channel retrievals to surface emittance and NWP profiles are investigated using NASA Langley historic land and ocean clear-sky skin temperature (Ts) values derived from high-resolution 11-μm TIR brightness temperature measured from geostationary satellites (GEOSat) and Advanced Very High Resolution Radiometers (AVHRR). It is shown that mean GEOSat-derived, anisotropy-corrected LST can vary by up to ±0.8 K depending on whether CERES or MODIS ɛs sources are used. Furthermore, the use of either NOAA Global Forecast System (GFS) or NASA Goddard Modern-Era Retrospective Analysis for Research and Applications (MERRA) for the radiative transfer model initial atmospheric state can account for more than 0.5-K variation in mean Ts. The results are compared to measurements from the Surface Radiation Budget Network (SURFRAD), an Atmospheric Radiation Measurement (ARM) Program ground

  16. Complex Personhood of Hip Hop & the Sensibilities of the Culture That Fosters Knowledge of Self & Self-Determination (United States)

    Love, Bettina L.


    Hip hop music and culture have a complex identity in that hip hop is based in self-determination, resistance, and the long enduring fight for Black freedom, but was also created alongside the seductiveness of the material and psychological conditions of capitalism, sexism, and patriarchy. Hip hop pedagogy (HHP) as a pedagogical framework is…

  17. Engaging Black Males on Their Own Terms: What Schools Can Learn from Black Males Who Produce Hip-Hop (United States)

    Irby, Decoteau J.; Petchauer, Emery; Kirkland, David


    Education scholars and practitioners have much to learn about engagement and motivation of Black males by directing their inquiries to more organic sites of hip-hop cultural production outside of schools. One such site is the hip-hop's informal labor economy where Black males engage in earning money through hip-hop cultural production. Labor…

  18. Involvement of Vacuolar Sequestration and Active Transport in Tolerance of Saccharomyces cerevisiae to Hop Iso-?-Acids

    NARCIS (Netherlands)

    Hazelwood, L.A.; Walsh, M.C.; Pronk, J.T.; Daran, J.M.


    The hop plant, Humulus lupulus L., has an exceptionally high content of secondary metabolites, the hop -acids, which possess a range of beneficial properties, including antiseptic action. Studies performed on the mode of action of hop iso--acids have hitherto been restricted to lactic acid bacteria.

  19. Characteristics of compounds in hops using cyclic voltammetry, UV-VIS, FTIR and GC-MS analysis. (United States)

    Masek, Anna; Chrzescijanska, Ewa; Kosmalska, Anna; Zaborski, Marian


    The article presents the antioxidant properties of the extracts of hop EI and EII, by the electrochemical methods on a platinum electrode and comparative analysis of the composition of the extracts of hops using UV-VIS, FTIR and GC-MS methods. The hops extract EI, was obtained from the waste of the hops cone. The hops extract EII, was obtained from the hops cone itself. Hops contain a wide range of polyphenolic compounds with antioxidant properties divided in various chemical classes. Flavonoids and other polyphenolic compounds contained in hops show antioxidant capacity because of the presence of hydroxyl groups in various configurations and numbers within their molecules. The electrochemical properties and antioxidant capacity of hop samples were determined to select the most effective antioxidant. Based on the cyclic and pulse voltammograms, it was observed that hop extract EI contains polyphenols that are oxidised at a less positive potential than extract EII, i.e., it shows better antioxidant capacity. From the analysis of the UV-VIS and FTIR spectra and the GC-MS analysis, it was observed that extract EI contains less phenyl compounds than EII. In addition to flavonoids, EII contains hop acids and chlorophyll. The solutions of hop extracts show very good antioxidant capacities; therefore, they can effectively inhibit or slow negative oxidation reactions and scavenge free radicals and reactive oxygen species (ROS). Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. RNAi knockdown of Hop (Hsp70/Hsp90 organising protein) decreases invasion via MMP-2 down regulation.

    LENUS (Irish Health Repository)

    Walsh, Naomi


    We previously identified Hop as over expressed in invasive pancreatic cancer cell lines and malignant tissues of pancreatic cancer patients, suggesting an important role for Hop in the biology of invasive pancreatic cancer. Hop is a co-chaperone protein that binds to both Hsp70\\/Hsp90. We hypothesised that by targeting Hop, signalling pathways modulating invasion and client protein stabilisation involving Hsp90-dependent complexes may be altered. In this study, we show that Hop knockdown by small interfering (si)RNA reduces the invasion of pancreatic cancer cells, resulting in decreased expression of the downstream target gene, matrix metalloproteinases-2 (MMP-2). Hop in conditioned media co-immunoprecipitates with MMP-2, implicating a possible extracellular function for Hop. Knockdown of Hop expression also reduced expression levels of Hsp90 client proteins, HER2, Bcr-Abl, c-MET and v-Src. Furthermore, Hop is strongly expressed in high grade PanINs compared to lower PanIN grades, displaying differential localisation in invasive ductal pancreatic cancer, indicating that the localisation of Hop is an important factor in pancreatic tumours. Our data suggests that the attenuation of Hop expression inactivates key signal transduction proteins which may decrease the invasiveness of pancreatic cancer cells possibly through the modulation of Hsp90 activity. Therefore, targeting Hop in pancreatic cancer may constitute a viable strategy for targeted cancer therapy.

  1. Meteosat SEVIRI Fire Radiative Power (FRP) products from the Land Surface Analysis Satellite Applications Facility (LSA SAF) - Part 1: Algorithms, product contents and analysis (United States)

    Wooster, M. J.; Roberts, G.; Freeborn, P. H.; Xu, W.; Govaerts, Y.; Beeby, R.; He, J.; Lattanzio, A.; Mullen, R.


    Characterising changes in landscape scale fire activity at very high temporal resolution is best achieved using thermal observations of actively burning fires made from geostationary Earth observation (EO) satellites. Over the last decade or more, a series of research and/or operational "active fire" products have been developed from these types of geostationary observations, often with the aim of supporting the generation of data related to biomass burning fuel consumption and trace gas and aerosol emission fields. The Fire Radiative Power (FRP) products generated by the Land Surface Analysis Satellite Applications Facility (LSA SAF) from data collected by the Meteosat Second Generation (MSG) Spinning Enhanced Visible and Infrared Imager (SEVIRI) are one such set of products, and are freely available in both near real-time and archived form. Every 15 min, the algorithms used to generate these products identify and map the location of new SEVIRI observations containing actively burning fires, and characterise their individual rates of radiative energy release (fire radiative power; FRP) that is believed proportional to rates of biomass consumption and smoke emission. The FRP-PIXEL product contains the highest spatial resolution FRP dataset, delivered for all of Europe, northern and southern Africa, and part of South America at a spatial resolution of 3 km (decreasing away from the west African sub-satellite point) at the full 15 min temporal resolution. The FRP-GRID product is an hourly summary of the FRP-PIXEL data, produced at a 5° grid cell size and including simple bias adjustments for meteorological cloud cover and for the regional underestimation of FRP caused, primarily, by the non-detection of low FRP fire pixels at SEVIRI's relatively coarse pixel size. Here we describe the enhanced geostationary Fire Thermal Anomaly (FTA) algorithm used to detect the SEVIRI active fire pixels, and detail methods used to deliver atmospherically corrected FRP information

  2. IMHRP: Improved Multi-Hop Routing Protocol for Wireless Sensor Networks (United States)

    Huang, Jianhua; Ruan, Danwei; Hong, Yadong; Zhao, Ziming; Zheng, Hong


    Wireless sensor network (WSN) is a self-organizing system formed by a large number of low-cost sensor nodes through wireless communication. Sensor nodes collect environmental information and transmit it to the base station (BS). Sensor nodes usually have very limited battery energy. The batteries cannot be charged or replaced. Therefore, it is necessary to design an energy efficient routing protocol to maximize the network lifetime. This paper presents an improved multi-hop routing protocol (IMHRP) for homogeneous networks. In the IMHRP protocol, based on the distances to the BS, the CH nodes are divided into internal CH nodes and external CH nodes. The set-up phase of the protocol is based on the LEACH protocol and the minimum distance between CH nodes are limited to a special constant distance, so a more uniform distribution of CH nodes is achieved. In the steady-state phase, the routes of different CH nodes are created on the basis of the distances between the CH nodes. The energy efficiency of communication can be maximized. The simulation results show that the proposed algorithm can more effectively reduce the energy consumption of each round and prolong the network lifetime compared with LEACH protocol and MHT protocol.

  3. Energy-efficient power allocation of two-hop cooperative systems with imperfect channel estimation

    KAUST Repository

    Amin, Osama


    Recently, much attention has been paid to the green design of wireless communication systems using energy efficiency (EE) metrics that should capture all energy consumption sources to deliver the required data. In this paper, we formulate an accurate EE metric for cooperative two-hop systems that use the amplify-and-forward relaying scheme. Different from the existing research that assumes the availability of perfect channel state information (CSI) at the communication cooperative nodes, we assume a practical scenario, where training pilots are used to estimate the channels. The estimated CSI can be used to adapt the available resources of the proposed system in order to maximize the EE. Two estimation strategies are assumed namely disintegrated channel estimation, which assumes the availability of channel estimator at the relay, and cascaded channel estimation, where the relay is not equipped with channel estimator and only forwards the received pilot(s) in order to let the destination estimate the cooperative link. The channel estimation cost is reflected on the EE metric by including the estimation error in the signal-to-noise term and considering the energy consumption during the estimation phase. Based on the formulated EE metric, we propose an energy-aware power allocation algorithm to maximize the EE of the cooperative system with channel estimation. Furthermore, we study the impact of the estimation parameters on the optimized EE performance via simulation examples.

  4. Total algorithms

    NARCIS (Netherlands)

    Tel, G.

    We define the notion of total algorithms for networks of processes. A total algorithm enforces that a "decision" is taken by a subset of the processes, and that participation of all processes is required to reach this decision. Total algorithms are an important building block in the design of

  5. Medium optimization for pyrroloquinoline quinone (PQQ) production by Methylobacillus sp. zju323 using response surface methodology and artificial neural network-genetic algorithm. (United States)

    Wei, Peilian; Si, Zhenjun; Lu, Yao; Yu, Qingfei; Huang, Lei; Xu, Zhinan


    Methylobacillus sp. zju323 was adopted to improve the biosynthesis of pyrroloquinoline quinone (PQQ) by systematic optimization of the fermentation medium. The Plackett-Burman design was implemented to screen for the key medium components for the PQQ production. CoCl 2  · 6H 2 O, ρ-amino benzoic acid, and MgSO 4  · 7H 2 O were found capable of enhancing the PQQ production most significantly. A five-level three-factor central composite design was used to investigate the direct and interactive effects of these variables. Both response surface methodology (RSM) and artificial neural network-genetic algorithm (ANN-GA) were used to predict the PQQ production and to optimize the medium composition. The results showed that the medium optimized by ANN-GA was better than that by RSM in maximizing PQQ production and the experimental PQQ concentration in the ANN-GA-optimized medium was improved by 44.3% compared with that in the unoptimized medium. Further study showed that this ANN-GA-optimized medium was also effective in improving PQQ production by fed-batch mode, reaching the highest PQQ accumulation of 232.0 mg/L, which was about 47.6% increase relative to that in the original medium. The present work provided an optimized medium and developed a fed-batch strategy which might be potentially applicable in industrial PQQ production.

  6. Statistical modeling and optimization of alkaline protease production from a newly isolated alkalophilic Bacillus species BGS using response surface methodology and genetic algorithm. (United States)

    Moorthy, Innasi Muthu Ganesh; Baskar, Rajoo


    A new hyperactive alkalophilic bacterial strain (Bacillus sp. BGS) was isolated from samples collected from soil that received the effluent of a milk processing industry located in Madurai, Tamilnadu, India, and this bacterial strain was used for the production of alkaline protease. Four out of eight variables, such as molasses, peptone, pH, and inoculum size, have been identified through Plackett-Burman (PB) design and used for the alkaline protease production. These significant variables were further optimized through a hybrid system of response surface methodology (RSM) followed by genetic algorithm (GA). The optimal combination of media components and culture conditions for maximal protease production was found to be 16.827 g/L of peptone, 1.128% (v/v) of molasses, pH value of 11, and 2% (v/v) of inoculum size. A 6.36-fold increase in protease production was achieved through the RSM-GA hybrid system. The protease activity increased significantly with an optimized medium (2,992.75 U/mL) as opposed to an unoptimized basal medium (470.35 U/mL).

  7. Certified algorithms for implicit surfaces

    NARCIS (Netherlands)

    Plantinga, Simon Hilbert


    Driedimensionale objecten worden veelvuldig gebruikt in grafische computerapplicaties, zoals in computer aided design (CAD), animatie en spellen. In het proefschrift worden verschillende contourgeneratoren bestudeerd en een nieuw algoritme geïntroduceerd voor het beschrijven van de 3D-objecten.

  8. Characterization of Volatile Components from Hüller Bitterer Hop Variety Using In-Tube Extraction GC-MS Analysis


    Liana Claudia Salanță; Maria Tofană; Sonia Socaci; Carmen Pop; Anamaria Pop; Ana Cuceu


    The composition of hop oil contributes to the aroma of beer and the essential oil profile of hop samples contains valuable information for brewers. The aim of this study was to characterize the Hüller Bitterer hop variety, during the development of hop cones, by analysis the composition of volatile oil using in-tube extraction gas chromatography–mass spectrometry (ITEX-GC–MS). The obtained results show that the ITEX-GC/MS method is suitable for the determination of volatile compounds from hop...

  9. Vibrational spectroscopy and chemometrics for rapid, quantitative analysis of bitter acids in hops (Humulus lupulus). (United States)

    Killeen, Daniel P; Andersen, David H; Beatson, Ron A; Gordon, Keith C; Perry, Nigel B


    Hops, Humulus lupulus, are grown worldwide for use in the brewing industry to impart characteristic flavor and aroma to finished beer. Breeders produce many varietal crosses with the aim of improving and diversifying commercial hops varieties. The large number of crosses critical to a successful breeding program imposes high demands on the supporting chemical analytical laboratories. With the aim of reducing the analysis time associated with hops breeding, quantitative partial least-squares regression (PLS-R) models have been produced, relating reference data acquired by the industrial standard HPLC and UV methods, to vibrational spectra of the same, chemically diverse hops sample set. These models, produced from rapidly acquired infrared (IR), near-infrared (NIR), and Raman spectra, were appraised using standard statistical metrics. Results demonstrated that all three spectroscopic methods could be used for screening hops for α-acid, total bitter acids, and cohumulone concentrations in powdered hops. Models generated from Raman and IR spectra also showed potential for use in screening hops varieties for xanthohumol concentrations. NIR analysis was performed using both a standard benchtop spectrometer and a portable NIR spectrometer, with comparable results obtained by both instruments. Finally, some important vibrational features of cohumulone, colupulone, and xanthohumol were assigned using DFT calculations, which allow more insightful interpretation of PLS-R latent variable plots.

  10. Effect of ensiled hop (Humulus lupulus L.) residues on plasma acetate turnover rate in sheep. (United States)

    Al-Mamun, Mohammad; Saito, Aya; Sano, Hiroaki


    An isotope dilution method using [1-(13)C]sodium acetate was applied to determine the effect of feeding ensiled hop (Humulus lupulus L.) residues on plasma acetate turnover rate in six adult crossbred sheep. The sheep were fed 63 g/kg body weight (BW)(0.75)/day of either mixed hay of orchardgrass (Dactylis glomerata L.) and reed canarygrass (Phalaris arundinacea L.) and round bale silage at 3:1 ratio (Hay-diet), or another where round bale silage was replaced by ensiled hop residues (Hop-diet) with a crossover design each of a 3-week period. The isotope dilution method was performed on day 21 of each dietary treatment. Dry matter digestibility was similar between diets, and nitrogen (N) digestibility was lower (P = 0.001) for Hop-diet than Hay-diet. However, N retention did not differ between diets. Plasma acetate concentration was lower (P = 0.04) for Hop-diet than Hay-diet, and the turnover rate of plasma acetate did not differ between diets. Plasma concentration of lactate and non-esterified fatty acids were similar between diets. Hop-diet was found almost comparable to Hay-diet on plasma acetate turnover rate in the present experimental conditions. Therefore, it could be concluded that hop residues partially could be used as an alternative to traditionally used round bale silage for rearing sheep. © 2011 The Authors; Animal Science Journal © 2011 Japanese Society of Animal Science.

  11. Effects of hops (Humulus lupulus L.) extract on volatile fatty acid production by rumen bacteria. (United States)

    Flythe, M D; Aiken, G E


    To determine the effects of hops extract on in vitro volatile fatty acid (VFA) production by bovine rumen micro-organisms. When mixed rumen microbes were suspended in media containing carbohydrates, the initial rates of VFA production were suppressed by β-acid-rich hops extract. The rates of VFA production increased over extended incubations (24 h), and hops extract caused an increase in the propionate to acetate ratio. Hops extract inhibited the growth and metabolism of Streptococcus bovis, but Selenomonas ruminantium and Megasphaera elsdenii were not affected. Likewise, the propionate production of M. elsdenii/S. bovis co-cultures, but not M. elsdenii/S. ruminantium co-cultures, was decreased in the presence of hops extract. These results are consistent with the hypothesis that the hops inhibit Gram-positive lactic acid bacteria (S. bovis), and the rumen microbial community requires a period of adaptation before normal VFA production resumes. Selenomonas bovis and S. ruminantium both produce lactate, which is the substrate for propionate production by M. elsdenii. However, S. ruminantium has an outer membrane, while S. bovis does not. The enhanced production of the gluconeogenesis precursor, propionic acid, provides further evidence that plant secondary metabolites from hops could be used to improve rumen fermentation. Journal compilation © 2010 The Society for Applied Microbiology. No claim to US Government works.

  12. Ability of a new hop test to determine functional deficits after anterior cruciate ligament reconstruction. (United States)

    Augustsson, Jesper; Thomeé, Roland; Karlsson, Jon


    The aim of this study was to investigate the ability of a new hop test to determine functional deficits after anterior cruciate ligament (ACL) reconstruction. The test consists of a pre-exhaustion exercise protocol combined with a single-leg hop. Nineteen male patients with ACL reconstruction (mean time after operation 11 months) who exhibited normal single-leg hop symmetry values (> or =90% compared with the non-involved extremity) were tested for one-repetition maximum (1 RM) strength of a knee-extension exercise. The patients then performed single-leg hops following a standardised pre-exhaustion exercise protocol, which consisted of unilateral weight machine knee-extensions until failure at 50% of 1 RM. Although no patients displayed abnormal hop symmetry when non-fatigued, 68% of the patients showed abnormal hop symmetry for the fatigued test condition. Sixty-three per cent exhibited 1 RM strength scores of below 90% of the non-involved leg. Eighty-four percent of the patients exhibited abnormal symmetry in at least one of the tests. Our findings indicate that patients are not fully rehabilitated 11 months after ACL reconstruction. It is concluded that the pre-exhaustion exercise protocol, combined with the single-leg hop test, improved testing sensitivity when evaluating lower-extremity function after ACL reconstruction. For a more comprehensive evaluation of lower-extremity function after ACL reconstruction, it is therefore suggested that functional testing should be performed both under non-fatigued and fatigued test conditions.

  13. Hopping transport in hostile reaction-diffusion systems (United States)

    Missel, Andrew R.; Dahmen, Karin A.


    We investigate transport in a disordered reaction-diffusion model consisting of particles which are allowed to diffuse, compete with one another (2A→A) , give birth in small areas called “oases” (A→2A) , and die in the “desert” outside the oases (A→0) . This model has previously been used to study bacterial populations in the laboratory and is related to a model of plankton populations in the oceans. We first consider the nature of transport between two oases: In the limit of high growth rate, this is effectively a first passage process, and we are able to determine the first passage time probability density function in the limit of large oasis separation. This result is then used along with the theory of hopping conduction in doped semiconductors to estimate the time taken by a population to cross a large system.

  14. Mode competition and hopping in optomechanical nano-oscillators (United States)

    Zhang, Xingwang; Lin, Tong; Tian, Feng; Du, Han; Zou, Yongchao; Chau, Fook Siong; Zhou, Guangya


    We investigate the inter-mode nonlinear interaction in the multi-mode optomechanical nano-oscillator which consists of coupled silicon nanocantilevers, where the integrated photonic crystal nanocavities provide the coupling between the optical and mechanical modes. Due to the self-saturation and cross-saturation of the mechanical gain, the inter-mode competition is observed, which leads to the bistable operation of the optomechanical nano-oscillator: only one of the mechanical modes can oscillate at any one time, and the oscillation of one mode extremely suppresses that of the other with a side mode suppression ratio (SMSR) up to 40 dB. In the meantime, mode hopping, i.e., the optomechanical oscillation switches from one mode to the other, is also observed and found to be able to be provoked by excitation laser fluctuations.

  15. Evolution of Nagaoka phase with kinetic energy frustrating hopping (United States)

    Lisandrini, F. T.; Bravo, B.; Trumper, A. E.; Manuel, L. O.; Gazza, C. J.


    We investigate, using the density-matrix renormalization group, the evolution of the Nagaoka state with t' hopping that frustrates the hole kinetic energy in the U =∞ Hubbard model on the square and anisotropic triangular lattices. We find that the Nagaoka ferromagnet survives up to a rather small tc'/t ˜0.2 . At this critical value, there is a transition to an antiferromagnetic phase that depends on the lattice: a Q =(Q ,0 ) spiral order, which continuously evolves with t', for the triangular lattice and the usual Q =(π ,π ) Néel order for the square lattice. Remarkably, the local magnetization takes its classical value for all considered t' (t'/t ≤1 ). Our results show that the recently found classical kinetic antiferromagnetism, a perfect counterpart of Nagaoka ferromagnetism, is a generic phenomenon in these kinetically frustrated electronic systems.

  16. Double-hop networks using VSATs for the Intelsat system (United States)

    Mizuno, Toshio; Nohara, Mitsuo; Watanabe, Fumio; Takeuchi, Yoshio; Honda, Teruhiko

    The double-hop VSAT (very small aperture terminal) network was studied with emphasis on its feasibility and networking in the Intelsat system. The results of channel-capacity estimation indicate that reasonable channel capacity and availability objectives equal to those for Super IBS (Intelsat business services) are attainable through the use of the uplink and downlink power control incorporated in the outbound link with BPSK/SCPC (binary-phase shift keying/single channel per carrier) transmission. Possible network architectures for various beam configurations were devised, and the accessibility of individual network architectures was analyzed in terms of blocking probability and call setup time. Based on the results of architecture study, an example implementation of VSAT system is shown. Furthermore, experimental results on the developed VSAT system are discussed. The experiment showed that the transmit power control for the outbound SCPC carrier is conducive to meeting stringent performance objectives stipulated for international digital transmissions.

  17. Nonregenerative Dual-Hop Cooperative Links with Selection Diversity

    Directory of Open Access Journals (Sweden)

    Karagiannidis George K


    Full Text Available The end-to-end performance of dual-hop cooperative diversity systems equipped with nonregenerative relays and a selection combining receiver at the destination terminal over independent and nonidentical Nakagami- fading channels is studied. Closed-form expressions for the cumulative distribution function and the probability density function of the end-to-end signal-to-noise ratio ( are presented, while analytical formulae are derived for the moments and the moment generating function. Using these statistical results, closed-form expressions for the outage probability are presented for both channel state information and fixed gain relays. Furthermore, for the case of fixed gain relay, the average end-to-end , the amount of fading, and the average bit error rate can be numerically evaluated. The proposed mathematical analysis is complemented by numerical examples, including the effects on the overall performance of the s unbalancing as well as the fading severity.

  18. Anomalous flux quantization in a hubbard ring with correlated hopping

    Energy Technology Data Exchange (ETDEWEB)

    Arrachea, L.; Aligia, A.A.; Gagliano, E. [Centro Atomico Bariloche and Instituto Balseiro, Comision Nacional de Energia Atomica, 8400 Bariloche (Argentina)


    We solve exactly a generalized Hubbard ring with twisted boundary conditions. The magnitude of the nearest-neighbor hopping depends on the occupations of the sites involved and the term which modifies the number of doubly occupied sites {ital t}{sub {ital AB}}=0. Although {eta}-pairing state with off-diagonal long-range order are part of the degenerate ground state, the behavior of the energy as a function of the twist rules out superconductivity in this limit. A small {ital t}{sub {ital AB}} breaks the degeneracy and for moderate repulsive {ital U} introduce superconducting correlations which lead to {open_quote}{open_quote}anomalous{close_quote}{close_quote} flux quantization. {copyright} {ital 1996 The American Physical Society.}

  19. Understanding hopping transport and thermoelectric properties of conducting polymers (United States)

    Ihnatsenka, S.; Crispin, X.; Zozoulenko, I. V.


    We calculate the conductivity σ and the Seebeck coefficient S for the phonon-assisted hopping transport in conducting polymers poly(3,4-ethylenedioxythiophene) or PEDOT, experimentally studied by Bubnova et al. [J. Am. Chem. Soc. 134, 16456 (2012)], 10.1021/ja305188r. We use the Monte Carlo technique as well as the semianalytical approach based on the transport energy concept. We demonstrate that both approaches show a good qualitative agreement for the concentration dependence of σ and S . At the same time, we find that the semianalytical approach is not in a position to describe the temperature dependence of the conductivity. We find that both Gaussian and exponential density of states (DOS) reproduce rather well the experimental data for the concentration dependence of σ and S giving similar fitting parameters of the theory. The obtained parameters correspond to a hopping model of localized quasiparticles extending over 2-3 monomer units with typical jumps over a distance of 3-4 units. The energetic disorder (broadening of the DOS) is estimated to be 0.1 eV. Using the Monte Carlo calculation we reproduce the activation behavior of the conductivity with the calculated activation energy close to the experimentally observed one. We find that for a low carrier concentration a number of free carriers contributing to the transport deviates strongly from the measured oxidation level. Possible reasons for this behavior are discussed. We also study the effect of the dimensionality on the charge transport by calculating the Seebeck coefficient and the conductivity for the cases of three-, two-, and one-dimensional motion.

  20. Transport of hop aroma compounds across Caco-2 monolayers. (United States)

    Heinlein, A; Metzger, M; Walles, H; Buettner, A


    Although being reported and used as a sedative remedy for several years, the bioactive principle of hop preparations is still not decisively clarified. Understanding absorption and transformation processes of potential physiologically active constituents is essential to evaluate the likeliness of biological effects on humans. Therefore, single hop aroma compounds as well as digestive transformation products thereof have been investigated in view of their human intestinal absorption, applying Caco-2 transport experiments as well as investigations on potential biotransformation processes. Selective and sensitive identification and quantification were thereby achieved by application of two-dimensional high resolution gas chromatography-mass spectrometry in conjunction with stable isotope dilution analysis, leading to the determination of apparent permeability values by different mathematical approaches considering sink and non-sink conditions. Overall, calculated permeability values ranged from 2.6 × 10(-6) to 1.8 × 10(-4) cm s(-1) with all mathematical approaches, indicating high absorption potential and almost complete bioavailability for all tested compounds with hydroxyl-functionalities. Considering this high permeability together with the high lipophilicity of these substances, a passive transcellular uptake route can be speculated. Investigated sesquiterpenes and β-myrcene showed flat absorption profiles while the investigated esters showed decreasing profiles. In view of the lipophilic and volatile nature of the investigated substances, special attention was paid to recovery and mass balance determination. Furthermore, in the course of the transport experiments of 1-octen-3-ol and 3-methyl-2-buten-1-ol, additional biotransformation products were observed, namely 3-octanone and 3-methyl-2-butenal, respectively. The absence of these additional substances in control experiments strongly indicates an intestinal first-pass metabolism of the