WorldWideScience

Sample records for surface figure error

  1. Figures of merit for surface plasmon waveguides

    Science.gov (United States)

    Berini, Pierre

    2006-12-01

    Three figures of merit are proposed as quality measures for surface plasmon waveguides. They are defined as benefit-to-cost ratios where the benefit is confinement and the cost is attenuation. Three different ways of measuring confinement are considered, leading to three figures of merit. One of the figures of merit is connected to the quality factor. The figures of merit were then used to assess and compare the wavelength response of hree popular 1-D surface plasmon waveguides: the single metal-dielectric interface, the metal slab bounded by dielectric and the dielectric slab bounded by metal. Closed form expressions are given for the figures of merit of the single metal-dielectric interface.

  2. Minimizing Uncertainty in Cryogenic Surface Figure Measurement

    Science.gov (United States)

    Blake, Peter; Mink, Ronald G.; Chambers, John; Robinson, F. David; Content, David; Davila, Pamela

    2005-01-01

    A new facility at the Goddard Space Flight Center is designed to measure with unusual accuracy the surface figure of mirrors at cryogenic temperatures down to 12 K. The facility is currently configured for spherical mirrors with a radius of curvature (ROC) of 600 mm, and apertures of about 150 mm or less. The goals of the current experiment were to 1) Obtain the best possible estimate of test mirror surface figure, S(x,y) at 87 K and 20 K; 2) Obtain the best estimate of the cryo-change, Delta (x,y): the change in surface figure between room temperature and the two cryo-temperatures; and 3) Determine the uncertainty of these measurements, using the definitions and guidelines of the ISO Guide to the Expression of Uncertainty in Measurement. A silicon mirror was tested, and the cry-change from room temperature to 20K was found to be 3.7 nm rms, with a standard uncertainty of 0.23 nm in the rms statistic. Both the cryo-change figure and the uncertainty are among the lowest such figures yet published. This report describes the facilities, experimental methods, and uncertainty analysis of the measurements.

  3. Figures

    Data.gov (United States)

    U.S. Environmental Protection Agency — data for figures 1-8 in journal article "Assessment of port-related air quality impacts: geographic analysis of population", International Journal of Environment and...

  4. Figuring and Polishing Precision Optical Surfaces Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The requirements for cost effective manufacturing and metrology of large optical surfaces is instrumental for the success of future NASA programs such as LISA,...

  5. Influence of material removal programming on ion beam figuring of high-precision optical surfaces

    Science.gov (United States)

    Liao, Wenlin; Dai, Yifan; Xie, Xuhui

    2014-09-01

    Ion beam figuring (IBF) provides a nanometer/subnanometer precision fabrication technology for optical components, where the surface materials on highlands are gradually removed by the physical sputtering effect. In this deterministic method, the figuring process is usually divided into several iterations and the sum of the removed material in each iteration is expected to approach the ideally removed material as nearly as possible. However, we find that the material removal programming in each iteration would influence the surface error convergence of the figuring process. The influence of material removal programming on the surface error evolution is investigated through the comparative study of the contour removal method (CRM) and the geometric proportion removal method (PRM). The research results indicate that the PRM can maintenance the smoothness of the surface topography during the whole figuring process, which would benefit the stable operation of the machine tool and avoid the production of mid-to-high spatial frequency surface errors. Additionally, the CRM only has the corrective effect on the area above the contour line in each iteration, which would result in the nonuniform convergence of the surface errors in various areas. All these advantages distinguish PRM as an appropriate material removal method for ultraprecision optical surfaces.

  6. Mirror and grating surface figure requirements for grazing incidence synchrotron radiation beamlines: Power loading effects

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, S.L.; Sharma, S.

    1987-01-01

    At present, grazing incidence mirrors are used almost exclusively as the first optical element in VUV and soft x-ray synchrotron radiation beamlines. The performance of these mirrors is determined by thermal and mechanical stress-induced figure errors as well as by figure errors remaining from the grinding and polishing process. With the advent of VUV and soft x-ray undulators and wigglers has come a new set of thermal stress problems related to both the magnitude and the spatial distribution of power from these devices. In many cases the power load on the entrance slits and gratings in these beamlines is no longer negligible. The dependence of thermally-induced front-end mirror figure errors on various storage ring and insertion device parameters (especially those at the National Synchrotron Light Source) and the effects of these figure errors on two classes of soft x-ray beamlines are presented.

  7. X-ray Multilayers and Thin-Shell Substrate Surface-Figure Correction

    Science.gov (United States)

    Windt, David

    We propose a comprehensive experimental research program whose two main goals are (a) to improve the performance of hard X-ray multilayer coatings and (b) to develop a high-throughput method to correct mid-frequency surface errors in thin-shell mirror substrates. Achieving these goals will enable the cost-effective construction of light- weight, highly-nested X-ray telescopes having greater observational sensitivity, wider energy coverage, and higher angular resolution than can be achieved at present. The realization of this technology will thus benefit the development of a variety of Explorer- class NASA X-ray astronomy missions now being formulated for both the soft and hard X-ray bands, and will enable the construction of future facility-class X-ray missions that will require both high sensitivity and high resolution. Building on the success of our previous APRA-funded research, we plan to investigate new thin-film growth techniques, new materials, and new aperiodic coating designs in order to develop new hard X-ray multilayers that have higher X-ray reflectance, wider energy response, lower film stress, and good stability, and that can be produced more quickly, at reduced cost. Additionally, we propose to build upon our extensive experience in sub-nm film-thickness control using velocity modulation and masked deposition techniques, and in the recent development of low-roughness, low-stress films grown by reactive sputtering, in order to develop new methods for correcting mid-frequency surface errors in thin-shell mirror substrates using both differential deposition and ion-beam figuring, either alone or in combination. These two surface-correction techniques already being used for sub-nm figuring of precision optics in a variety of disciplines, including diffraction-limited EUV lithography and synchrotron applications requiring sub-micron focusing are ideally suited for controlling mm-scale surface errors in the thin-shell substrates used for astronomical X

  8. Correcting intensity loss errors in the absence of texture-free reference samples during pole figure measurement

    International Nuclear Information System (INIS)

    Saleh, Ahmed A.; Vu, Viet Q.; Gazder, Azdiar A.

    2016-01-01

    Even with the use of X-ray polycapillary lenses, sample tilting during pole figure measurement results in a decrease in the recorded X-ray intensity. The magnitude of this error is affected by the sample size and/or the finite detector size. These errors can be typically corrected by measuring the intensity loss as a function of the tilt angle using a texture-free reference sample (ideally made of the same alloy as the investigated material). Since texture-free reference samples are not readily available for all alloys, the present study employs an empirical procedure to estimate the correction curve for a particular experimental configuration. It involves the use of real texture-free reference samples that pre-exist in any X-ray diffraction laboratory to first establish the empirical correlations between X-ray intensity, sample tilt and their Bragg angles and thereafter generate correction curves for any Bragg angle. It will be shown that the empirically corrected textures are in very good agreement with the experimentally corrected ones. - Highlights: •Sample tilting during X-ray pole figure measurement leads to intensity loss errors. •Texture-free reference samples are typically used to correct the pole figures. •An empirical correction procedure is proposed in the absence of reference samples. •The procedure relies on reference samples that pre-exist in any texture laboratory. •Experimentally and empirically corrected textures are in very good agreement.

  9. Error analysis of aspheric surface with reference datum.

    Science.gov (United States)

    Peng, Yanglin; Dai, Yifan; Chen, Shanyong; Song, Ci; Shi, Feng

    2015-07-20

    Severe requirements of location tolerance provide new challenges for optical component measurement, evaluation, and manufacture. Form error, location error, and the relationship between form error and location error need to be analyzed together during error analysis of aspheric surface with reference datum. Based on the least-squares optimization method, we develop a least-squares local optimization method to evaluate form error of aspheric surface with reference datum, and then calculate the location error. According to the error analysis of a machined aspheric surface, the relationship between form error and location error is revealed, and the influence on the machining process is stated. In different radius and aperture of aspheric surface, the change laws are simulated by superimposing normally distributed random noise on an ideal surface. It establishes linkages between machining and error analysis, and provides an effective guideline for error correcting.

  10. Figuring and Polishing Precision Optical Surfaces, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The requirements for cost effective manufacturing and metrology of large optical surfaces is instrumental for the success of future NASA programs such as LISA,...

  11. Differential Deposition for Surface Figure Corrections in Grazing Incidence X-Ray Optics

    Science.gov (United States)

    Ramsey, Brian D.; Kilaru, Kiranmayee; Atkins, Carolyn; Gubarev, Mikhail V.; Broadway, David M.

    2015-01-01

    Differential deposition corrects the low- and mid- spatial-frequency deviations in the axial figure of Wolter-type grazing incidence X-ray optics. Figure deviations is one of the major contributors to the achievable angular resolution. Minimizing figure errors can significantly improve the imaging quality of X-ray optics. Material of varying thickness is selectively deposited, using DC magnetron sputtering, along the length of optic to minimize figure deviations. Custom vacuum chambers are built that can incorporate full-shell and segmented Xray optics. Metrology data of preliminary corrections on a single meridian of full-shell x-ray optics show an improvement of mid-spatial frequencies from 6.7 to 1.8 arc secs HPD. Efforts are in progress to correct a full-shell and segmented optics and to verify angular-resolution improvement with X-ray testing.

  12. AXAF optical technology analysis. [effects of alignment figure errors on the performance of grazing incidence telescopes

    Science.gov (United States)

    Korsch, D.

    1979-01-01

    A grazing incidence telescope with six nested subsystems is investigated through the effects of misalignment and surface deformations on it's image quality. The axial rms-spot size serves as measure for the image quality. The surface deformations are simulated by ellipsoidal and sinusoidal deviation elements. Each type of defect is analyzed in the single two-element system. The full nested system is then analyzed in the presence of all possible defects on all twelve elements, whereby the magnitude of the defects is randomized within a given upper limit.

  13. Material removal and surface figure during pad polishing of fused silica

    Energy Technology Data Exchange (ETDEWEB)

    Suratwala, T I; Feit, M D; Steele, W A

    2009-05-04

    The material removal and surface figure after ceria pad polishing of fused silica glass have been measured and analyzed as a function of kinematics, loading conditions, and polishing time. Also, the friction at the workpiece/lap interface, the slope of the workpiece relative to the lap plane, and lap viscoelastic properties have been measured and correlated to material removal. The results show that the relative velocity between the workpiece & lap (determined by the kinematics) and the pressure distribution determine the spatial and temporal material removal and hence the final surface figure of the workpiece. In the case where the applied loading and relative velocity distribution over the workpiece are spatially uniform, a significant non-uniform spatial material removal from the workpiece surface is observed. This is due to a non-uniform pressure distribution resulting from: (1) a moment caused by a pivot point and interface friction forces; (2) viscoelastic relaxation of the polyurethane lap; and (3) a physical workpiece/lap interface mismatch. Both the kinematics and these contributions to the pressure distribution are quantitatively described, and then combined to form a spatial and temporal Preston model & code for material removal (called Surface Figure or SurF{copyright}). The surface figure simulations are consistent with the experiment for a wide variety of polishing conditions. This study is an important step towards deterministic full-aperture polishing, which would allow optical glass fabrication to be performed in a more repeatable, less iterative, and hence more economical manner.

  14. Specification of the surface figure and finish of optical elements in terms of system performance

    International Nuclear Information System (INIS)

    Church, E.L.; Takacs, P.Z.

    1992-09-01

    Brookhaven National Laboratory is the site of the National Synchrotron Light Source (NSLS); an electron synchrotron which is an intense source of hard and soft x-rays. Since there are no effective refracting elements for x rays, this radiation must be manipulated and focused by mirrors configured to give high reflectivity. This paper describes methods of predicting the degradation of the performance of a simple imaging system in terms of the statistics of the shape errors of the focusing element, and conversely, of specifying those statistics in terms of requirements on image quality. Results are illustrated for a normal-incidence x-ray mirrors having figure errors plus conventional and/or fractal finish errors

  15. Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns

    Science.gov (United States)

    Zhang, Pengfei; Chen, Huawei; Zhang, Liwen; Ran, Tong; Zhang, Deyuan

    2015-11-01

    Nepenthes pitcher inspired slippery lubricant-infused porous surfaces greatly impact the understanding of liquid-repellent surfaces construction and have attracted extensive attention in recent years due to their potential applications in self-cleaning, anti-fouling, anti-icing, etc. In this work, we have successfully fabricated transparent slippery lubricant-infused surfaces based on breath figure patterns (BFPs). Large-area BFPs with interconnected pores were initially formed on the glass substrate and then a suitable lubricant was added onto the surfaces. The interconnected pores in BFPs were able to hold the lubricant liquid in place and form a stable liquid/solid composite surface capable of repelling a variety of liquids. The liquid-repellent surfaces show extremely low critical sliding angles for various liquids, thus providing the surfaces with efficient self-cleaning property. It was also found that the liquid droplets' sliding behaviors on the surfaces were significantly influenced by the tilting angle of the substrate, liquid volume, liquid chemical properties, and pore sizes of the surfaces.

  16. EXPERIMENTAL VALIDATION OF CUMULATIVE SURFACE LOCATION ERROR FOR TURNING PROCESSES

    Directory of Open Access Journals (Sweden)

    Adam K. Kiss

    2016-02-01

    Full Text Available The aim of this study is to create a mechanical model which is suitable to investigate the surface quality in turning processes, based on the Cumulative Surface Location Error (CSLE, which describes the series of the consecutive Surface Location Errors (SLE in roughing operations. In the established model, the investigated CSLE depends on the currently and the previously resulted SLE by means of the variation of the width of cut. The phenomenon of the system can be described as an implicit discrete map. The stationary Surface Location Error and its bifurcations were analysed and flip-type bifurcation was observed for CSLE. Experimental verification of the theoretical results was carried out.

  17. Crowdsourcing for error detection in cortical surface delineations

    DEFF Research Database (Denmark)

    Ganz, Melanie; Kondermann, Daniel; Andrulis, Jonas

    2017-01-01

    crowdsourcing platform were asked to annotate errors in automatic cortical surface delineations on 100 central, coronal slices of MR images. RESULTS: On average, annotations for 100 images were obtained in less than an hour. When using expert annotations as reference, the crowd on average achieves a sensitivity...

  18. Crowdsourcing for error detection in cortical surface delineations.

    Science.gov (United States)

    Ganz, Melanie; Kondermann, Daniel; Andrulis, Jonas; Knudsen, Gitte Moos; Maier-Hein, Lena

    2017-01-01

    With the recent trend toward big data analysis, neuroimaging datasets have grown substantially in the past years. While larger datasets potentially offer important insights for medical research, one major bottleneck is the requirement for resources of medical experts needed to validate automatic processing results. To address this issue, the goal of this paper was to assess whether anonymous nonexperts from an online community can perform quality control of MR-based cortical surface delineations derived by an automatic algorithm. So-called knowledge workers from an online crowdsourcing platform were asked to annotate errors in automatic cortical surface delineations on 100 central, coronal slices of MR images. On average, annotations for 100 images were obtained in less than an hour. When using expert annotations as reference, the crowd on average achieves a sensitivity of 82 % and a precision of 42 %. Merging multiple annotations per image significantly improves the sensitivity of the crowd (up to 95 %), but leads to a decrease in precision (as low as 22 %). Our experiments show that the detection of errors in automatic cortical surface delineations generated by anonymous untrained workers is feasible. Future work will focus on increasing the sensitivity of our method further, such that the error detection tasks can be handled exclusively by the crowd and expert resources can be focused on error correction.

  19. Surface measurement errors using commercial scanning white light interferometers

    International Nuclear Information System (INIS)

    Gao, F; Petzing, J; Coupland, J M; Leach, R K

    2008-01-01

    This paper examines the performance of commercial scanning white light interferometers in a range of measurement tasks. A step height artefact is used to investigate the response of the instruments at a discontinuity, while gratings with sinusoidal and rectangular profiles are used to investigate the effects of surface gradient and spatial frequency. Results are compared with measurements made with tapping mode atomic force microscopy and discrepancies are discussed with reference to error mechanisms put forward in the published literature. As expected, it is found that most instruments report errors when used in regions close to a discontinuity or those with a surface gradient that is large compared to the acceptance angle of the objective lens. Amongst other findings, however, we report systematic errors that are observed when the surface gradient is considerably smaller. Although these errors are typically less than the mean wavelength, they are significant compared to the vertical resolution of the instrument and indicate that current scanning white light interferometers should be used with some caution if sub-wavelength accuracy is required

  20. Surface measurement errors using commercial scanning white light interferometers

    Science.gov (United States)

    Gao, F.; Leach, R. K.; Petzing, J.; Coupland, J. M.

    2008-01-01

    This paper examines the performance of commercial scanning white light interferometers in a range of measurement tasks. A step height artefact is used to investigate the response of the instruments at a discontinuity, while gratings with sinusoidal and rectangular profiles are used to investigate the effects of surface gradient and spatial frequency. Results are compared with measurements made with tapping mode atomic force microscopy and discrepancies are discussed with reference to error mechanisms put forward in the published literature. As expected, it is found that most instruments report errors when used in regions close to a discontinuity or those with a surface gradient that is large compared to the acceptance angle of the objective lens. Amongst other findings, however, we report systematic errors that are observed when the surface gradient is considerably smaller. Although these errors are typically less than the mean wavelength, they are significant compared to the vertical resolution of the instrument and indicate that current scanning white light interferometers should be used with some caution if sub-wavelength accuracy is required.

  1. The intrinsic error thresholds of the surface code with correlated errors

    Science.gov (United States)

    Jouzdani, Pejman; Mucciolo, Eduardo; Novais, Eduardo

    2014-03-01

    We study how the resilience of the surface code to decoherence is affected by the presence of a bosonic bath. The surface code experiences an effective dynamics due to the coupling to a bosonic bath that correlates the qubits of the code. The range of the effective induced qubit-qubit interaction depends on parameters related to the bath correlation functions. We show hat different ranges set different intrinsic bounds on the fidelity of the code. These bounds appear to be independent of the stochastic error probabilities frequently studied in the literature and to be merely a consequence of the induced dynamics by the bath. We introduce a new definition of stabilizers based on logical operators that allows us to efficiently implement a Metropolis algorithm to determine the intrinsic upper bounds to the error threshold. Supported by the ONR and the NSF grant CCF 1117241.

  2. Error estimates for CCMP ocean surface wind data sets

    Science.gov (United States)

    Atlas, R. M.; Hoffman, R. N.; Ardizzone, J.; Leidner, S.; Jusem, J.; Smith, D. K.; Gombos, D.

    2011-12-01

    The cross-calibrated, multi-platform (CCMP) ocean surface wind data sets are now available at the Physical Oceanography Distributed Active Archive Center from July 1987 through December 2010. These data support wide-ranging air-sea research and applications. The main Level 3.0 data set has global ocean coverage (within 78S-78N) with 25-kilometer resolution every 6 hours. An enhanced variational analysis method (VAM) quality controls and optimally combines multiple input data sources to create the Level 3.0 data set. Data included are all available RSS DISCOVER wind observations, in situ buoys and ships, and ECMWF analyses. The VAM is set up to use the ECMWF analyses to fill in areas of no data and to provide an initial estimate of wind direction. As described in an article in the Feb. 2011 BAMS, when compared to conventional analyses and reanalyses, the CCMP winds are significantly different in some synoptic cases, result in different storm statistics, and provide enhanced high-spatial resolution time averages of ocean surface wind. We plan enhancements to produce estimated uncertainties for the CCMP data. We will apply the method of Desroziers et al. for the diagnosis of error statistics in observation space to the VAM O-B, O-A, and B-A increments. To isolate particular error statistics we will stratify the results by which individual instruments were used to create the increments. Then we will use cross-validation studies to estimate other error statistics. For example, comparisons in regions of overlap for VAM analyses based on SSMI and QuikSCAT separately and together will enable estimating the VAM directional error when using SSMI alone. Level 3.0 error estimates will enable construction of error estimates for the time averaged data sets.

  3. Effect of x-ray mirror figure error on the focus profile: comparison of measurements with physical and geometric optics simulations

    Science.gov (United States)

    Laundy, David; Sawhney, Kawal

    2017-08-01

    Mirrors operating at grazing angles utilising total external reflection are commonly used for focusing X-ray at synchrotron radiation sources. Figure error on the mirror causes distortion of the focus profile. We have modeled a well characterized test mirror which has three different modifications of the elliptical figure laid down in parallel lanes running the length of the mirror. The focusing of the mirror was simulated using geometric optics (ray tracing) and physical optics (wave propagation). The mirror was then tested with X-rays on a beamline at a synchrotron radiation facility. The comparison between the two simulation methods and the measured data elucidates the origins of structures on the intensity profile of the focused beam and demonstrate that for quantitative agreement between simulation and experiment, interference and diffraction effects must be modeled.

  4. Ultrahigh Error Threshold for Surface Codes with Biased Noise

    Science.gov (United States)

    Tuckett, David K.; Bartlett, Stephen D.; Flammia, Steven T.

    2018-02-01

    We show that a simple modification of the surface code can exhibit an enormous gain in the error correction threshold for a noise model in which Pauli Z errors occur more frequently than X or Y errors. Such biased noise, where dephasing dominates, is ubiquitous in many quantum architectures. In the limit of pure dephasing noise we find a threshold of 43.7(1)% using a tensor network decoder proposed by Bravyi, Suchara, and Vargo. The threshold remains surprisingly large in the regime of realistic noise bias ratios, for example 28.2(2)% at a bias of 10. The performance is, in fact, at or near the hashing bound for all values of the bias. The modified surface code still uses only weight-4 stabilizers on a square lattice, but merely requires measuring products of Y instead of Z around the faces, as this doubles the number of useful syndrome bits associated with the dominant Z errors. Our results demonstrate that large efficiency gains can be found by appropriately tailoring codes and decoders to realistic noise models, even under the locality constraints of topological codes.

  5. Error bounds for surface area estimators based on Crofton's formula

    DEFF Research Database (Denmark)

    Kiderlen, Markus; Meschenmoser, Daniel

    2009-01-01

    According to Crofton’s formula, the surface area S(A) of a sufficiently regular compact set A in R^d is proportional to the mean of all total projections pA (u) on a linear hyperplane with normal u, uniformly averaged over all unit vectors u. In applications, pA (u) is only measured in k directio...... in the sense that the relative error of the surface area estimator is very close to the minimal error....... and the mean is approximated by a finite weighted sum S(A) of the total projections in these directions. The choice of the weights depends on the selected quadrature rule. We define an associated zonotope Z (depending only on the projection directions and the quadrature rule), and show that the relative error...... S (A)/S (A) is bounded from below by the inradius of Z and from above by the circumradius of Z. Applying a strengthened isoperimetric inequality due to Bonnesen, we show that the rectangular quadrature rule does not give the best possible error bounds for d = 2. In addition, we derive asymptotic...

  6. Does semantic impairment explain surface dyslexia? VLSM evidence for a double dissociation between regularization errors in reading and semantic errors in picture naming

    Directory of Open Access Journals (Sweden)

    Sara Pillay

    2014-04-01

    Full Text Available The correlation between semantic deficits and exception word regularization errors ("surface dyslexia" in semantic dementia has been taken as strong evidence for involvement of semantic codes in exception word pronunciation. Rare cases with semantic deficits but no exception word reading deficit have been explained as due to individual differences in reading strategy, but this account is hotly debated. Semantic dementia is a diffuse process that always includes semantic impairment, making lesion localization difficult and independent assessment of semantic deficits and reading errors impossible. We addressed this problem using voxel-based lesion symptom mapping in 38 patients with left hemisphere stroke. Patients were all right-handed, native English speakers and at least 6 months from stroke onset. Patients performed an oral reading task that included 80 exception words (words with inconsistent orthographic-phonologic correspondence, e.g., pint, plaid, glove. Regularization errors were defined as plausible but incorrect pronunciations based on application of spelling-sound correspondence rules (e.g., 'plaid' pronounced as "played". Two additional tests examined explicit semantic knowledge and retrieval. The first measured semantic substitution errors during naming of 80 standard line drawings of objects. This error type is generally presumed to arise at the level of concept selection. The second test (semantic matching required patients to match a printed sample word (e.g., bus with one of two alternative choice words (e.g., car, taxi on the basis of greater similarity of meaning. Lesions were labeled on high-resolution T1 MRI volumes using a semi-automated segmentation method, followed by diffeomorphic registration to a template. VLSM used an ANCOVA approach to remove variance due to age, education, and total lesion volume. Regularization errors during reading were correlated with damage in the posterior half of the middle temporal gyrus and

  7. Analysis and research on curved surface's prototyping error based on FDM process

    Science.gov (United States)

    Gong, Y. D.; Zhang, Y. C.; Yang, T. B.; Wang, W. S.

    2008-12-01

    Analysis and research methods on curved surface's prototyping error with FDM (Fused Deposition Modeling) process are introduced in this paper, then the experiment result of curved surface's prototyping error is analyzed, and the integrity of point cloud information and the fitting method of curved surface prototyping are discussed as well as the influence on curved surface's prototyping error with different software. Finally, the qualitative and quantitative conclusions on curved surface's prototyping error are acquired in this paper.

  8. Partial compensation interferometry for measurement of surface parameter error of high-order aspheric surfaces

    Science.gov (United States)

    Hao, Qun; Li, Tengfei; Hu, Yao

    2018-01-01

    Surface parameters are the properties to describe the shape characters of aspheric surface, which mainly include vertex radius of curvature (VROC) and conic constant (CC). The VROC affects the basic properties, such as focal length of an aspheric surface, while the CC is the basis of classification for aspheric surface. The deviations of the two parameters are defined as surface parameter error (SPE). Precisely measuring SPE is critical for manufacturing and aligning aspheric surface. Generally, SPE of aspheric surface is measured directly by curvature fitting on the absolute profile measurement data from contact or non-contact testing. And most interferometry-based methods adopt null compensators or null computer-generated holograms to measure SPE. To our knowledge, there is no effective way to measure SPE of highorder aspheric surface with non-null interferometry. In this paper, based on the theory of slope asphericity and the best compensation distance (BCD) established in our previous work, we propose a SPE measurement method for high-order aspheric surface in partial compensation interferometry (PCI) system. In the procedure, firstly, we establish the system of two element equations by utilizing the SPE-caused BCD change and surface shape change. Then, we can simultaneously obtain the VROC error and CC error in PCI system by solving the equations. Simulations are made to verify the method, and the results show a high relative accuracy.

  9. La petite fille de la surface comme figure de la dissolution du soi

    Directory of Open Access Journals (Sweden)

    Öznur Karakaş

    2015-12-01

    Full Text Available This article follows the traces of the jeune fille that can be found throughout Deleuze’s Logic of Sense, so as to pave the way for further reflection on possible links between feminism(s and Deleuzian thought. By analysing the key concepts of Logic of Sense, it is shown that Deleuze conceptualizes the jeune fille as the figure of the dissolution of the self, carried out through a close reading of Leibniz, Nietzsche and psychoanalysis. The jeune fille/the feminine is accordingly construed as an aleatory point at the intersection of possible world(s. This in turn resonates with Luce Irigaray’s project with respect to sexual difference, in which she calls upon feminists to create conceptions of the feminine as pure difference, not captured by the name of the Father or the patriarchal symbolic system.

  10. Figure5

    Data.gov (United States)

    U.S. Environmental Protection Agency — This is an R statistics package script that allows the reproduction of Figure 5. The script includes the links to large NetCDF files that the figures access for O3,...

  11. Error correction and degeneracy in surface codes suffering loss

    International Nuclear Information System (INIS)

    Stace, Thomas M.; Barrett, Sean D.

    2010-01-01

    Many proposals for quantum information processing are subject to detectable loss errors. In this paper, we give a detailed account of recent results in which we showed that topological quantum memories can simultaneously tolerate both loss errors and computational errors, with a graceful tradeoff between the threshold for each. We further discuss a number of subtleties that arise when implementing error correction on topological memories. We particularly focus on the role played by degeneracy in the matching algorithms and present a systematic study of its effects on thresholds. We also discuss some of the implications of degeneracy for estimating phase transition temperatures in the random bond Ising model.

  12. Figure 7

    Data.gov (United States)

    U.S. Environmental Protection Agency — Two files provided. The ENS.tar file contains text data files (*.csv) used to create Figure 7 and Figure 8. The Figure7.txt is an R script that reads these files and...

  13. Application of genetic algorithm in the evaluation of the profile error of archimedes helicoid surface

    Science.gov (United States)

    Zhu, Lianqing; Chen, Yunfang; Chen, Qingshan; Meng, Hao

    2011-05-01

    According to minimum zone condition, a method for evaluating the profile error of Archimedes helicoid surface based on Genetic Algorithm (GA) is proposed. The mathematic model of the surface is provided and the unknown parameters in the equation of surface are acquired through least square method. Principle of GA is explained. Then, the profile error of Archimedes Helicoid surface is obtained through GA optimization method. To validate the proposed method, the profile error of an Archimedes helicoid surface, Archimedes Cylindrical worm (ZA worm) surface, is evaluated. The results show that the proposed method is capable of correctly evaluating the profile error of Archimedes helicoid surface and satisfy the evaluation standard of the Minimum Zone Method. It can be applied to deal with the measured data of profile error of complex surface obtained by three coordinate measurement machines (CMM).

  14. Cubic Invariant Spherical Surface Harmonics in Conjunction With Diffraction Strain Pole-Figures

    NARCIS (Netherlands)

    Brakman, C.M.

    1986-01-01

    Four kinds of cubic invariant spherical surface harmonics are introduced. It has been shown previously that these harmonics occur in the equations relating measured diffraction (line-shift) elastic strain and macro-stresses generating these strains for the case of textured cubic materials. As a

  15. A Nonequilibrium Figure of Saturn's Satellite Iapetus and the Origin of the Equatorial Ridge on Its Surface

    Science.gov (United States)

    Kondratyev, B. P.

    2018-03-01

    The structure, dynamical equilibrium, and evolution of Saturn's moon Iapetus are studied. It has been shown that, in the current epoch, the oblateness of the satellite ɛ2 ≈ 0.046 does not correspond to its angular velocity of rotation, which causes the secular spherization behavior of the ice shell of Iapetus. To study this evolution, we apply a spheroidal model, containing a rock core and an ice shell with an external surface ɛ2, to Iapetus. The model is based on the equilibrium finite-difference equation of the Clairaut theory, while the model parameters are taken from observations. The mean radius of the rock core and the oblateness of its level surface, ɛ1 ≈ 0.028, were determined. It was found that Iapetus is covered with a thick ice shell, which is 56.6% of the mean radius of the figure. We analyze a role of the core in the evolution of the shape of a gravitating figure. It was determined that the rock core plays a key part in the settling of the ice masses of the equatorial bulge, which finally results in the formation of a large circular equatorial ridge on the surface of the satellite. From the known mean altitude of this ice ridge, it was found that, in the epoch of its formation, the rotation period of Iapetus was 166 times shorter than that at present, as little as T ≈ 11h27m. This is consistent with the fact that a driving force of the evolution of the satellite in our model was its substantial despinning. The model also predicts that the ice ridge should be formed more intensively in the leading (dark and, consequently, warmer) hemisphere of the satellite, where the ice is softer. This inference agrees with the observations: in the leading hemisphere of Iapetus, the ridge is actually high and continuous everywhere, while it degenerates into individual ice peaks in the opposite colder hemisphere.

  16. Regular figures

    CERN Document Server

    Tóth, L Fejes; Ulam, S; Stark, M

    1964-01-01

    Regular Figures concerns the systematology and genetics of regular figures. The first part of the book deals with the classical theory of the regular figures. This topic includes description of plane ornaments, spherical arrangements, hyperbolic tessellations, polyhedral, and regular polytopes. The problem of geometry of the sphere and the two-dimensional hyperbolic space are considered. Classical theory is explained as describing all possible symmetrical groupings in different spaces of constant curvature. The second part deals with the genetics of the regular figures and the inequalities fo

  17. Figure Drawing

    Science.gov (United States)

    Herberholz, Barbara

    2010-01-01

    The figure has "figured" prominently in the choice of subject matter for many artists throughout history. Whether they may choose to depict it in an abstract or expressive form, most artists are quite capable of realistic portrayals of the human form. And all people know that one of the very first drawings made by young children is a symbol for…

  18. Error Decomposition and Adaptivity for Response Surface Approximations from PDEs with Parametric Uncertainty

    KAUST Repository

    Bryant, C. M.

    2015-01-01

    In this work, we investigate adaptive approaches to control errors in response surface approximations computed from numerical approximations of differential equations with uncertain or random data and coefficients. The adaptivity of the response surface approximation is based on a posteriori error estimation, and the approach relies on the ability to decompose the a posteriori error estimate into contributions from the physical discretization and the approximation in parameter space. Errors are evaluated in terms of linear quantities of interest using adjoint-based methodologies. We demonstrate that a significant reduction in the computational cost required to reach a given error tolerance can be achieved by refining the dominant error contributions rather than uniformly refining both the physical and stochastic discretization. Error decomposition is demonstrated for a two-dimensional flow problem, and adaptive procedures are tested on a convection-diffusion problem with discontinuous parameter dependence and a diffusion problem, where the diffusion coefficient is characterized by a 10-dimensional parameter space.

  19. Figure 3

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Figure.tar.gz contains a directory for each WRF ensemble run. In these directories are *.csv files for each meteorology variable examined. These are comma...

  20. Figure6

    Data.gov (United States)

    U.S. Environmental Protection Agency — R script for the reproduction of Figure6. This script accesses archived CMAQ and WRF model output on US EPA's HPC sol computer system and plots forward trajectories...

  1. A posteriori error estimates for finite volume approximations of elliptic equations on general surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Lili; Tian, Li; Wang, Desheng

    2008-10-31

    In this paper, we present a residual-based a posteriori error estimate for the finite volume discretization of steady convection– diffusion–reaction equations defined on surfaces in R3, which are often implicitly represented as level sets of smooth functions. Reliability and efficiency of the proposed a posteriori error estimator are rigorously proved. Numerical experiments are also conducted to verify the theoretical results and demonstrate the robustness of the error estimator.

  2. Manufacture of Free-Form Optical Surfaces with Limited Mid-Spatial Frequency Error, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Our proposed innovation is a robust manufacturing process for free-form optical surfaces with limited mid-spatial frequency (MSF) irregularity error. NASA and many...

  3. Figures1

    OpenAIRE

    2014-01-01

    NB. Soulignons que cette carte, établie à partir de statistiques officielles, est en contradiction avec de nombreuses enquêtes locales.Source : Diop Salif, Rekacewicz Philippe, 2003, Atlas mondial de l’eau, Paris, Éditions Autrement.Figure 1. Part de la population urbaine ayant accès à l'eau potable en Afrique subsaharienne Source : Diop, Rekacewicz, 2003.Figure 2. Afrique subsaharienne : pénurie d'eau douce et stress hydrique en 1990 et 2025 (projection) Source : Diop, Rekacewicz, 2003.Fig...

  4. The systematic and random errors determination using realtime 3D surface tracking system in breast cancer

    International Nuclear Information System (INIS)

    Kanphet, J; Suriyapee, S; Sanghangthum, T; Kumkhwao, J; Wisetrintong, M; Dumrongkijudom, N

    2016-01-01

    The purpose of this study to determine the patient setup uncertainties in deep inspiration breath-hold (DIBH) radiation therapy for left breast cancer patients using real-time 3D surface tracking system. The six breast cancer patients treated by 6 MV photon beams from TrueBeam linear accelerator were selected. The patient setup errors and motion during treatment were observed and calculated for interfraction and intrafraction motions. The systematic and random errors were calculated in vertical, longitudinal and lateral directions. From 180 images tracking before and during treatment, the maximum systematic error of interfraction and intrafraction motions were 0.56 mm and 0.23 mm, the maximum random error of interfraction and intrafraction motions were 1.18 mm and 0.53 mm, respectively. The interfraction was more pronounce than the intrafraction, while the systematic error was less impact than random error. In conclusion the intrafraction motion error from patient setup uncertainty is about half of interfraction motion error, which is less impact due to the stability in organ movement from DIBH. The systematic reproducibility is also half of random error because of the high efficiency of modern linac machine that can reduce the systematic uncertainty effectively, while the random errors is uncontrollable. (paper)

  5. Algorithm for ion beam figuring of low-gradient mirrors.

    Science.gov (United States)

    Jiao, Changjun; Li, Shengyi; Xie, Xuhui

    2009-07-20

    Ion beam figuring technology for low-gradient mirrors is discussed. Ion beam figuring is a noncontact machining technique in which a beam of high-energy ions is directed toward a target workpiece to remove material in a predetermined and controlled fashion. Owing to this noncontact mode of material removal, problems associated with tool wear and edge effects, which are common in conventional contact polishing processes, are avoided. Based on the Bayesian principle, an iterative dwell time algorithm for planar mirrors is deduced from the computer-controlled optical surfacing (CCOS) principle. With the properties of the removal function, the shaping process of low-gradient mirrors can be approximated by the linear model for planar mirrors. With these discussions, the error surface figuring technology for low-gradient mirrors with a linear path is set up. With the near-Gaussian property of the removal function, the figuring process with a spiral path can be described by the conventional linear CCOS principle, and a Bayesian-based iterative algorithm can be used to deconvolute the dwell time. Moreover, the selection criterion of the spiral parameter is given. Ion beam figuring technology with a spiral scan path based on these methods can be used to figure mirrors with non-axis-symmetrical errors. Experiments on SiC chemical vapor deposition planar and Zerodur paraboloid samples are made, and the final surface errors are all below 1/100 lambda.

  6. Ensemble Data Assimilation to Characterize Surface-Layer Errors In Numerical Weather Prediction Models

    Science.gov (United States)

    Hacker, Joshua; Angevine, Wayne

    2013-04-01

    Experiments with the single-column implementation of the Weather Research and Forecasting mesoscale model provide a basis for deducing land-atmosphere coupling errors in the model. Coupling occurs both through heat and moisture fluxes through the land-atmosphere interface and roughness sub-layer, and turbulent heat, moisture, and momentum fluxes through the atmospheric surface layer. This work primarily addresses the turbulent fluxes, which are parameterized following Monin-Obukhov similarity theory applied to the atmospheric surface layer. By combining ensemble data assimilation and parameter estimation, the model error can be characterized. Ensemble data assimilation of 2-m temperature and water vapor mixing ratio, and 10-m wind components, forces the model to follow observations during a month-long simulation for a column over the well-instrumented ARM Central Facility near Lamont, OK. One-hour errors in predicted observations are systematically small but non-zero, and the systematic errors measure bias as a function of local time of day. Analysis increments for state elements nearby (15-m AGL) can be too small or have the wrong sign, indicating systematically biased covariances and model error. Experiments using the ensemble filter to objectively estimate a parameter controlling the thermal land-atmosphere coupling show that the parameter adapts to offset the model errors, but that the errors cannot be eliminated. Results suggest either structural error or further parametric error that may be difficult to estimate. Experiments omitting atypical observations such as soil and flux measurements lead to qualitatively similar deductions, showing potential for assimilating common in-situ observations as an inexpensive framework for deducing and isolating model errors. We finish by presenting recent results from a deeper examination of the second-moment ensemble statistics, which demonstrate the effect of assimilation on the coupling through the stability function in

  7. Longwave surface radiation over the globe from satellite data - An error analysis

    Science.gov (United States)

    Gupta, S. K.; Wilber, A. C.; Darnell, W. L.; Suttles, J. T.

    1993-01-01

    Errors have been analyzed for monthly-average downward and net longwave surface fluxes derived on a 5-deg equal-area grid over the globe, using a satellite technique. Meteorological data used in this technique are available from the TIROS Operational Vertical Sounder (TOVS) system flown aboard NOAA's operational sun-synchronous satellites. The data used are for February 1982 from NOAA-6 and NOAA-7 satellites. The errors in the parametrized equations were estimated by comparing their results with those from a detailed radiative transfer model. The errors in the TOVS-derived surface temperature, water vapor burden, and cloud cover were estimated by comparing these meteorological parameters with independent measurements obtained from other satellite sources. Analysis of the overall errors shows that the present technique could lead to underestimation of downward fluxes by 5 to 15 W/sq m and net fluxes by 4 to 12 W/sq m.

  8. Numerical evaluation of the fidelity error threshold for the surface code

    Science.gov (United States)

    Jouzdani, Pejman; Mucciolo, Eduardo R.

    2014-07-01

    We study how the resilience of the surface code is affected by the coupling to a non-Markovian environment at zero temperature. The qubits in the surface code experience an effective dynamics due to the coupling to the environment that induces correlations among them. The range of the effective induced qubit-qubit interaction depends on parameters related to the environment and the duration of the quantum error correction cycle. We show numerically that different interaction ranges set different intrinsic bounds on the fidelity of the code. These bounds are unrelated to the error thresholds based on stochastic error models. We introduce a definition of stabilizers based on logical operators that allows us to efficiently implement a Metropolis algorithm to determine upper bounds to the fidelity error threshold.

  9. Automatic figure ranking and user interfacing for intelligent figure search.

    Directory of Open Access Journals (Sweden)

    Hong Yu

    2010-10-01

    Full Text Available Figures are important experimental results that are typically reported in full-text bioscience articles. Bioscience researchers need to access figures to validate research facts and to formulate or to test novel research hypotheses. On the other hand, the sheer volume of bioscience literature has made it difficult to access figures. Therefore, we are developing an intelligent figure search engine (http://figuresearch.askhermes.org. Existing research in figure search treats each figure equally, but we introduce a novel concept of "figure ranking": figures appearing in a full-text biomedical article can be ranked by their contribution to the knowledge discovery.We empirically validated the hypothesis of figure ranking with over 100 bioscience researchers, and then developed unsupervised natural language processing (NLP approaches to automatically rank figures. Evaluating on a collection of 202 full-text articles in which authors have ranked the figures based on importance, our best system achieved a weighted error rate of 0.2, which is significantly better than several other baseline systems we explored. We further explored a user interfacing application in which we built novel user interfaces (UIs incorporating figure ranking, allowing bioscience researchers to efficiently access important figures. Our evaluation results show that 92% of the bioscience researchers prefer as the top two choices the user interfaces in which the most important figures are enlarged. With our automatic figure ranking NLP system, bioscience researchers preferred the UIs in which the most important figures were predicted by our NLP system than the UIs in which the most important figures were randomly assigned. In addition, our results show that there was no statistical difference in bioscience researchers' preference in the UIs generated by automatic figure ranking and UIs by human ranking annotation.The evaluation results conclude that automatic figure ranking and user

  10. Automatic figure ranking and user interfacing for intelligent figure search.

    Science.gov (United States)

    Yu, Hong; Liu, Feifan; Ramesh, Balaji Polepalli

    2010-10-07

    Figures are important experimental results that are typically reported in full-text bioscience articles. Bioscience researchers need to access figures to validate research facts and to formulate or to test novel research hypotheses. On the other hand, the sheer volume of bioscience literature has made it difficult to access figures. Therefore, we are developing an intelligent figure search engine (http://figuresearch.askhermes.org). Existing research in figure search treats each figure equally, but we introduce a novel concept of "figure ranking": figures appearing in a full-text biomedical article can be ranked by their contribution to the knowledge discovery. We empirically validated the hypothesis of figure ranking with over 100 bioscience researchers, and then developed unsupervised natural language processing (NLP) approaches to automatically rank figures. Evaluating on a collection of 202 full-text articles in which authors have ranked the figures based on importance, our best system achieved a weighted error rate of 0.2, which is significantly better than several other baseline systems we explored. We further explored a user interfacing application in which we built novel user interfaces (UIs) incorporating figure ranking, allowing bioscience researchers to efficiently access important figures. Our evaluation results show that 92% of the bioscience researchers prefer as the top two choices the user interfaces in which the most important figures are enlarged. With our automatic figure ranking NLP system, bioscience researchers preferred the UIs in which the most important figures were predicted by our NLP system than the UIs in which the most important figures were randomly assigned. In addition, our results show that there was no statistical difference in bioscience researchers' preference in the UIs generated by automatic figure ranking and UIs by human ranking annotation. The evaluation results conclude that automatic figure ranking and user interfacing as

  11. Fast figuring of large optics by reactive atom plasma

    Science.gov (United States)

    Castelli, Marco; Jourdain, Renaud; Morantz, Paul; Shore, Paul

    2012-09-01

    The next generation of ground-based astronomical observatories will require fabrication and maintenance of extremely large segmented mirrors tens of meters in diameter. At present, the large production of segments required by projects like E-ELT and TMT poses time frames and costs feasibility questions. This is principally due to a bottleneck stage in the optical fabrication chain: the final figuring step. State-of-the-art figure correction techniques, so far, have failed to meet the needs of the astronomical community for mass production of large, ultra-precise optical surfaces. In this context, Reactive Atom Plasma (RAP) is proposed as a candidate figuring process that combines nanometer level accuracy with high material removal rates. RAP is a form of plasma enhanced chemical etching at atmospheric pressure based on Inductively Coupled Plasma technology. The rapid figuring capability of the RAP process has already been proven on medium sized optical surfaces made of silicon based materials. In this paper, the figure correction of a 3 meters radius of curvature, 400 mm diameter spherical ULE mirror is presented. This work demonstrates the large scale figuring capability of the Reactive Atom Plasma process. The figuring is carried out by applying an in-house developed procedure that promotes rapid convergence. A 2.3 μm p-v initial figure error is removed within three iterations, for a total processing time of 2.5 hours. The same surface is then re-polished and the residual error corrected again down to λ/20 nm rms. These results highlight the possibility of figuring a metre-class mirror in about ten hours.

  12. Goldmann tonometry tear film error and partial correction with a shaped applanation surface.

    Science.gov (United States)

    McCafferty, Sean J; Enikov, Eniko T; Schwiegerling, Jim; Ashley, Sean M

    2018-01-01

    The aim of the study was to quantify the isolated tear film adhesion error in a Goldmann applanation tonometer (GAT) prism and in a correcting applanation tonometry surface (CATS) prism. The separation force of a tonometer prism adhered by a tear film to a simulated cornea was measured to quantify an isolated tear film adhesion force. Acrylic hemispheres (7.8 mm radius) used as corneas were lathed over the apical 3.06 mm diameter to simulate full applanation contact with the prism surface for both GAT and CATS prisms. Tear film separation measurements were completed with both an artificial tear and fluorescein solutions as a fluid bridge. The applanation mire thicknesses were measured and correlated with the tear film separation measurements. Human cadaver eyes were used to validate simulated cornea tear film separation measurement differences between the GAT and CATS prisms. The CATS prism tear film adhesion error (2.74±0.21 mmHg) was significantly less than the GAT prism (4.57±0.18 mmHg, p error was independent of applanation mire thickness ( R 2 =0.09, p =0.04). Fluorescein produces more tear film error than artificial tears (+0.51±0.04 mmHg; p error (1.40±0.51 mmHg) was significantly less than that of the GAT prism (3.30±0.38 mmHg; p =0.002). Measured GAT tear film adhesion error is more than previously predicted. A CATS prism significantly reduced tear film adhesion error bŷ41%. Fluorescein solution increases the tear film adhesion compared to artificial tears, while mire thickness has a negligible effect.

  13. Multi sensor validation and error characteristics of Arctic satellite sea surface temperature observations

    DEFF Research Database (Denmark)

    Høyer, Jacob L.; Karagali, Ioanna; Tonbo, Rasmus

    2012-01-01

    in the satellite products related to observation techniques, data processing and cloud masking. Temporal and spatial error scales are derived for all satellite products using the satellite versus in situ match-up dataset. Temporal error scales are typically between 1 and 2 days and the characteristic spatial error......Six of the operational global satellite sea surface temperature products from infrared and microwave sensors are validated in a consistent way in waters north of 60° N. The 15-month validation with drifting buoy in situ observations shows that data from the Advanced Along-Tracking Scanning...... Radiometer (AATSR) on-board the ENVISAT satellite and NAVOCEANO data from the Advanced Very High Resolution Radiometer (AVHRR) on-board the NOAA 18 satellite are superior in terms of bias and standard deviation. The observations from the Advanced Microwave Scanning Radiometer-EOS (AMSR-E) on-board the Aqua...

  14. Fault-tolerance thresholds for the surface code with fabrication errors

    Science.gov (United States)

    Auger, James M.; Anwar, Hussain; Gimeno-Segovia, Mercedes; Stace, Thomas M.; Browne, Dan E.

    2017-10-01

    The construction of topological error correction codes requires the ability to fabricate a lattice of physical qubits embedded on a manifold with a nontrivial topology such that the quantum information is encoded in the global degrees of freedom (i.e., the topology) of the manifold. However, the manufacturing of large-scale topological devices will undoubtedly suffer from fabrication errors—permanent faulty components such as missing physical qubits or failed entangling gates—introducing permanent defects into the topology of the lattice and hence significantly reducing the distance of the code and the quality of the encoded logical qubits. In this work we investigate how fabrication errors affect the performance of topological codes, using the surface code as the test bed. A known approach to mitigate defective lattices involves the use of primitive swap gates in a long sequence of syndrome extraction circuits. Instead, we show that in the presence of fabrication errors the syndrome can be determined using the supercheck operator approach and the outcome of the defective gauge stabilizer generators without any additional computational overhead or use of swap gates. We report numerical fault-tolerance thresholds in the presence of both qubit fabrication and gate fabrication errors using a circuit-based noise model and the minimum-weight perfect-matching decoder. Our numerical analysis is most applicable to two-dimensional chip-based technologies, but the techniques presented here can be readily extended to other topological architectures. We find that in the presence of 8 % qubit fabrication errors, the surface code can still tolerate a computational error rate of up to 0.1 % .

  15. Figure Measurements of High-Energy-X-Ray Replicated Optics

    Science.gov (United States)

    Gubarev, Mikhail; Ramsey, Brian; Kester, Thomas; Engelhaupt, Darell; Speegle, Chet; Martin, Greg

    2003-01-01

    We are developing grazing incidence x-ray optics for a balloon-borne hard-x-ray telescope (HERO). The HERO mirror shells are fabricated using electroform-nickel replication off super-polished cylindrical mandrels. One of the sources for mirror resolution error is departure of the shell figure from prescription. We have modified a Vertical-scan Long Trace Profilometer (VLTP) in order to measure the figure of the inner surface of the HERO mirror shells for diameters as small as 76 mm. Mirror alignment method and sources for systematic errors will be discussed. Comparison of figure metrology of the mandrel and the shells will be presented together with results from x-ray tests.

  16. Figure correction of multilayer coated optics

    Science.gov (United States)

    Chapman; Henry N. , Taylor; John S.

    2010-02-16

    A process is provided for producing near-perfect optical surfaces, for EUV and soft-x-ray optics. The method involves polishing or otherwise figuring the multilayer coating that has been deposited on an optical substrate, in order to correct for errors in the figure of the substrate and coating. A method such as ion-beam milling is used to remove material from the multilayer coating by an amount that varies in a specified way across the substrate. The phase of the EUV light that is reflected from the multilayer will be affected by the amount of multilayer material removed, but this effect will be reduced by a factor of 1-n as compared with height variations of the substrate, where n is the average refractive index of the multilayer.

  17. Thermocouple Errors when Mounted on Cylindrical Surfaces in Abnormal Thermal Environments.

    Energy Technology Data Exchange (ETDEWEB)

    Nakos, James T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Suo-Anttila, Jill M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zepper, Ethan T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Koenig, Jerry J [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Valdez, Vincent A. [ECI Inc., Albuquerque, NM (United States)

    2017-05-01

    Mineral-insulated, metal-sheathed, Type-K thermocouples are used to measure the temperature of various items in high-temperature environments, often exceeding 1000degC (1273 K). The thermocouple wires (chromel and alumel) are protected from the harsh environments by an Inconel sheath and magnesium oxide (MgO) insulation. The sheath and insulation are required for reliable measurements. Due to the sheath and MgO insulation, the temperature registered by the thermocouple is not the temperature of the surface of interest. In some cases, the error incurred is large enough to be of concern because these data are used for model validation, and thus the uncertainties of the data need to be well documented. This report documents the error using 0.062" and 0.040" diameter Inconel sheathed, Type-K thermocouples mounted on cylindrical surfaces (inside of a shroud, outside and inside of a mock test unit). After an initial transient, the thermocouple bias errors typically range only about +-1-2% of the reading in K. After all of the uncertainty sources have been included, the total uncertainty to 95% confidence, for shroud or test unit TCs in abnormal thermal environments, is about +-2% of the reading in K, lower than the +-3% typically used for flat shrouds. Recommendations are provided in Section 6 to facilitate interpretation and use of the results. .

  18. Optimization of Gas Composition Used in Plasma Chemical Vaporization Machining for Figuring of Reaction-Sintered Silicon Carbide with Low Surface Roughness.

    Science.gov (United States)

    Sun, Rongyan; Yang, Xu; Ohkubo, Yuji; Endo, Katsuyoshi; Yamamura, Kazuya

    2018-02-05

    In recent years, reaction-sintered silicon carbide (RS-SiC) has been of interest in many engineering fields because of its excellent properties, such as its light weight, high rigidity, high heat conductance and low coefficient of thermal expansion. However, RS-SiC is difficult to machine owing to its high hardness and chemical inertness and because it contains multiple components. To overcome the problem of the poor machinability of RS-SiC in conventional machining, the application of atmospheric-pressure plasma chemical vaporization machining (AP-PCVM) to RS-SiC was proposed. As a highly efficient and damage-free figuring technique, AP-PCVM has been widely applied for the figuring of single-component materials, such as Si, SiC, quartz crystal wafers, and so forth. However, it has not been applied to RS-SiC since it is composed of multiple components. In this study, we investigated the AP-PCVM etching characteristics for RS-SiC by optimizing the gas composition. It was found that the different etching rates of the different components led to a large surface roughness. A smooth surface was obtained by applying the optimum gas composition, for which the etching rate of the Si component was equal to that of the SiC component.

  19. Error analysis of compensation cutting technique for wavefront error of KH2PO4 crystal.

    Science.gov (United States)

    Tie, Guipeng; Dai, Yifan; Guan, Chaoliang; Zhu, Dengchao; Song, Bing

    2013-09-20

    Considering the wavefront error of KH(2)PO(4) (KDP) crystal is difficult to control through face fly cutting process because of surface shape deformation during vacuum suction, an error compensation technique based on a spiral turning method is put forward. An in situ measurement device is applied to measure the deformed surface shape after vacuum suction, and the initial surface figure error, which is obtained off-line, is added to the in situ surface shape to obtain the final surface figure to be compensated. Then a three-axis servo technique is utilized to cut the final surface shape. In traditional cutting processes, in addition to common error sources such as the error in the straightness of guide ways, spindle rotation error, and error caused by ambient environment variance, three other errors, the in situ measurement error, position deviation error, and servo-following error, are the main sources affecting compensation accuracy. This paper discusses the effect of these three errors on compensation accuracy and provides strategies to improve the final surface quality. Experimental verification was carried out on one piece of KDP crystal with the size of Φ270 mm×11 mm. After one compensation process, the peak-to-valley value of the transmitted wavefront error dropped from 1.9λ (λ=632.8 nm) to approximately 1/3λ, and the mid-spatial-frequency error does not become worse when the frequency of the cutting tool trajectory is controlled by use of a low-pass filter.

  20. Density functionals for surface science: Exchange-correlation model development with Bayesian error estimation

    DEFF Research Database (Denmark)

    Wellendorff, Jess; Lundgård, Keld Troen; Møgelhøj, Andreas

    2012-01-01

    A methodology for semiempirical density functional optimization, using regularization and cross-validation methods from machine learning, is developed. We demonstrate that such methods enable well-behaved exchange-correlation approximations in very flexible model spaces, thus avoiding the overfit......A methodology for semiempirical density functional optimization, using regularization and cross-validation methods from machine learning, is developed. We demonstrate that such methods enable well-behaved exchange-correlation approximations in very flexible model spaces, thus avoiding...... the energetics of intramolecular and intermolecular, bulk solid, and surface chemical bonding, and the developed optimization method explicitly handles making the compromise based on the directions in model space favored by different materials properties. The approach is applied to designing the Bayesian error...... estimation functional with van der Waals correlation (BEEF-vdW), a semilocal approximation with an additional nonlocal correlation term. Furthermore, an ensemble of functionals around BEEF-vdW comes out naturally, offering an estimate of the computational error. An extensive assessment on a range of data...

  1. Correction of Sampling Errors in Ocean Surface Cross-Sectional Estimates from Nadir-Looking Weather Radar

    Science.gov (United States)

    Caylor, I. Jeff; Meneghini, R.; Miller, L. S.; Heymsfield, G. M.

    1997-01-01

    The return from the ocean surface has a number of uses for airborne meteorological radar. The normalized surface cross section has been used for radar system calibration, estimation of surface winds, and in algorithms for estimating the path-integrated attenuation in rain. However, meteorological radars are normally optimized for observation of distributed targets that fill the resolution volume, and so a point target such as the surface can be poorly sampled, particularly at near-nadir look angles. Sampling the nadir surface return at an insufficient rate results in a negative bias of the estimated cross section. This error is found to be as large as 4 dB using observations from a high-altitude airborne radar. An algorithm for mitigating the error is developed that is based upon the shape of the surface echo and uses the returned signal at the three range gates nearest the peak surface echo.

  2. Three-Dimensionally Conformal Porous Microstructured Fabrics via Breath Figures: A Nature-Inspired Approach for Novel Surface Modification of Textiles.

    Science.gov (United States)

    Gong, Jianliang; Xu, Bingang; Tao, Xiaoming

    2017-05-24

    Breath figures (BFs) are a kind of water droplet arrays that can be formed by condensing aqueous vapor onto a cold surface, such as dewy phenomenon on a spider web. This study developed a BF-inspired approach for direct introduction of desired materials onto the textile surfaces with three-dimensionally conformal porous microstructures by the evaporation of solution-coated fabric under high humidity environment, which brings a brand-new kind of modified textiles, three-dimensionally conformal porous microstructured fabrics (CPMFs). Such kind of CPMFs can possess customized multifunctional properties of introduced materials, and meanwhile maintain the inherent properties and unique texture features of fabrics. This nature-inspired BF approach is robust and versatile for customized preparation of CPMFs based on different fabrics with different common polymers. Moreover, it is also feasible for one-step functionalization of CPMFs by the incorporation of nanoparticles (such as titanium dioxide nanoparticles, TiO 2 NPs) into the porous microstructures during the BF process. Comparing to the sample modified without porous microstructures, the resultant TiO 2 NPs-incorporated CPMFs show an obviously enhanced performance on photocatalytic degradation of pollutants under the same ultraviolet irradiation conditions.

  3. Neural Prescribed Performance Control for Uncertain Marine Surface Vessels without Accurate Initial Errors

    Directory of Open Access Journals (Sweden)

    Wenjie Si

    2017-01-01

    Full Text Available This paper deals with the problems concerned with the trajectory tracking control with prescribed performance for marine surface vessels without velocity measurements in uncertain dynamical environments, in the presence of parametric uncertainties, unknown disturbances, and unknown dead-zone. First, only the ship position and heading measurements are available and a high-gain observer is used to estimate the unmeasurable velocities. Second, by utilizing the prescribed performance control, the prescribed tracking control performance can be ensured, while the requirement for the initial error is removed via the preprocessing. At last, based on neural network approximation in combination with backstepping and Lyapunov synthesis, a robust adaptive neural control scheme is developed to handle the uncertainties and input dead-zone characteristics. Under the designed adaptive controller for marine surface vessels, all the signals in the closed-loop system are semiglobally uniformly ultimately bounded (SGUUB, and the prescribed transient and steady tracking control performance is guaranteed. Simulation studies are performed to demonstrate the effectiveness of the proposed method.

  4. Rumsey and Walker_AMT_2016_Figure 2.xlsx

    Data.gov (United States)

    U.S. Environmental Protection Agency — Figure summarizes uncertainty (error) in hourly gradient flux measurements by individual analyte. Flux uncertainty is derived from estimates of uncertainty in...

  5. Mitigation of defocusing by statics and near-surface velocity errors by interferometric least-squares migration

    KAUST Repository

    Sinha, Mrinal

    2015-08-19

    We propose an interferometric least-squares migration method that can significantly reduce migration artifacts due to statics and errors in the near-surface velocity model. We first choose a reference reflector whose topography is well known from the, e.g., well logs. Reflections from this reference layer are correlated with the traces associated with reflections from deeper interfaces to get crosscorrelograms. These crosscorrelograms are then migrated using interferometric least-squares migration (ILSM). In this way statics and velocity errors at the near surface are largely eliminated for the examples in our paper.

  6. Surface errors without semantic impairment in acquired dyslexia: a voxel-based lesion-symptom mapping study.

    Science.gov (United States)

    Binder, Jeffrey R; Pillay, Sara B; Humphries, Colin J; Gross, William L; Graves, William W; Book, Diane S

    2016-05-01

    Patients with surface dyslexia have disproportionate difficulty pronouncing irregularly spelled words (e.g. pint), suggesting impaired use of lexical-semantic information to mediate phonological retrieval. Patients with this deficit also make characteristic 'regularization' errors, in which an irregularly spelled word is mispronounced by incorrect application of regular spelling-sound correspondences (e.g. reading plaid as 'played'), indicating over-reliance on sublexical grapheme-phoneme correspondences. We examined the neuroanatomical correlates of this specific error type in 45 patients with left hemisphere chronic stroke. Voxel-based lesion-symptom mapping showed a strong positive relationship between the rate of regularization errors and damage to the posterior half of the left middle temporal gyrus. Semantic deficits on tests of single-word comprehension were generally mild, and these deficits were not correlated with the rate of regularization errors. Furthermore, the deep occipital-temporal white matter locus associated with these mild semantic deficits was distinct from the lesion site associated with regularization errors. Thus, in contrast to patients with surface dyslexia and semantic impairment from anterior temporal lobe degeneration, surface errors in our patients were not related to a semantic deficit. We propose that these patients have an inability to link intact semantic representations with phonological representations. The data provide novel evidence for a post-semantic mechanism mediating the production of surface errors, and suggest that the posterior middle temporal gyrus may compute an intermediate representation linking semantics with phonology. © The Author (2016). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. Ion beam figuring of CVD silicon carbide mirrors

    Science.gov (United States)

    Gailly, P.; Collette, J.-P.; Fleury Frenette, K.; Jamar, C.

    2017-11-01

    Optical and structural elements made of silicon carbide are increasingly found in space instruments. Chemical vapor deposited silicon carbide (CVD-SiC) is used as a reflective coating on SiC optics in reason of its good behavior under polishing. The advantage of applying ion beam figuring (IBF) to CVD-SiC over other surface figure-improving techniques is discussed herein. The results of an IBF sequence performed at the Centre Spatial de Liège on a 100 mm CVD-SiC mirror are reported. The process allowed to reduce the mirror surface errors from 243 nm to 13 nm rms . Beside the surface figure, roughness is another critical feature to consider in order to preserve the optical quality of CVD-SiC . Thus, experiments focusing on the evolution of roughness were performed in various ion beam etching conditions. The roughness of samples etched at different depths down to 3 ≠m was determined with an optical profilometer. These measurements emphasize the importance of selecting the right combination of gas and beam energy to keep roughness at a low level. Kaufman-type ion sources are generally used to perform IBF but the performance of an end-Hall ion source in figuring CVD-SiC mirrors was also evaluated in this study. In order to do so, ion beam etching profiles obtained with the end-Hall source on CVD-SiC were measured and used as a basis for IBF simulations.

  8. Effect of temperature difference between manikin and wet fabric skin surfaces on clothing evaporative resistance: how much error is there?

    Science.gov (United States)

    Wang, Faming; Kuklane, Kalev; Gao, Chuansi; Holmér, Ingvar

    2012-01-01

    Clothing evaporative resistance is one of the inherent factors that impede heat exchange by sweating evaporation. It is widely used as a basic input in physiological heat strain models. Previous studies showed a large variability in clothing evaporative resistance both at intra-laboratory and inter-laboratory testing. The errors in evaporative resistance may cause severe problems in the determination of heat stress level of the wearers. In this paper, the effect of temperature difference between the manikin nude surface and wet textile skin surface on clothing evaporative resistance was investigated by both theoretical analysis and thermal manikin measurements. It was found that the temperature difference between the skin surface and the manikin nude surface could lead to an error of up to 35.9% in evaporative resistance of the boundary air layer. Similarly, this temperature difference could also introduce an error of up to 23.7% in the real clothing total evaporative resistance (R ( et_real ) < 0.1287 kPa m(2)/W). Finally, it is evident that one major error in the calculation of evaporative resistance comes from the use of the manikin surface temperature instead of the wet textile fabric skin temperature.

  9. Error intraobservador en el análisis paleohistológico de superficies craneofaciales / Intra-observer error in paleohistological analysis of craniofacial surfaces

    Directory of Open Access Journals (Sweden)

    Natalia Brachetta Aporta

    2015-12-01

    Full Text Available En el análisis histológico de las superficies óseas craneofaciales se registran rasgos microestructurales producidos por la actividad de modelado óseo, así como otros rasgos no vinculados al crecimiento normal (alteraciones tafonómicas. La identificación de las áreas producto de la actividad celular, así como la determinación de su distribución y su extensión total, puede estar sujeta a diversas fuentes de error. En este sentido, el objetivo del presente trabajo es evaluar el error intraobservador en el relevamiento de las microestructuras correspondientes a formación y reabsorción sobre superficies óseas craneofaciales vinculadas al modelado óseo. Para ello se realizó un diseño observacional de bloques completos aleatorios con medidas repetidas a partir de réplicas de alta resolución de la glabela, el malar y el maxilar observadas al microscopio de luz incidente. Los resultados permitieron detectar la existencia de tendencias en las observaciones a través del tiempo, así como diferencias en el reconocimiento según el tipo de superficie ósea y la región analizada. En general, se registró un aumento de la concordancia a través de las repeticiones en la observación del tipo de actividad y en la cuantificación de la extensión de las áreas de formación y reabsorción. Asimismo, se observó que presentan mayor dificultad en su análisis los rasgos asociados a la actividad de reabsorción así como las regiones con topografía abrupta, como la región maxilar. Estos resultados proveen un marco de referencia para evaluar la confiabilidad de las observaciones en futuros estudios paleohistológicos. PALABRAS CLAVE error de observación; diseño experimental; superficies de modelado óseo   Histological analysis of craniofacial bone surfaces reveals microstructural features produced by the activity of bone modeling, as well as other features not related to normal growth (taphonomic alterations. Identifying the areas

  10. Advances in precision mirror figure metrology (abstract)

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Furenlid, K.; Church, E.L.

    1992-01-01

    New developments in optical measurement techniques have made it possible to test the surface quality on grazing incidence optics with extreme precision and accuracy. An instrument developed at Brookhaven, the Long Trace Profiler (LTP), measures the figure of large (up to 1 m long) cylindrical aspheres with nanometer accuracy. The LTP optical system is based around a common-path interferometer design belonging to the class of slope measuring interferometers and, as such, it is very robust, stable, and vibration insensitive. A unique error correction technique removes the effect of tilt errors in the optical head as it traverses the air bearing, thus allowing one to accurately measure the absolute surface profile and radius of curvature. This is of critical importance to the manufacture of long-radius spherical optics used in high-resolution soft x-ray monochromators and in the testing of mirror bending systems. This talk will review the principle of operation of the LTP, probe the factors limiting the performance of the system, and will examine the current state of the art in synchrotron radiation mirror manufacturing quality (as viewed by our metrology techniques). This research was supported by the U.S. Department of Energy Contract No. DE-AC02-76CH00016

  11. Error sources in the retrieval of aerosol information over bright surfaces from satellite measurements in the oxygen A band

    Science.gov (United States)

    Nanda, Swadhin; de Graaf, Martin; Sneep, Maarten; de Haan, Johan F.; Stammes, Piet; Sanders, Abram F. J.; Tuinder, Olaf; Pepijn Veefkind, J.; Levelt, Pieternel F.

    2018-01-01

    Retrieving aerosol optical thickness and aerosol layer height over a bright surface from measured top-of-atmosphere reflectance spectrum in the oxygen A band is known to be challenging, often resulting in large errors. In certain atmospheric conditions and viewing geometries, a loss of sensitivity to aerosol optical thickness has been reported in the literature. This loss of sensitivity has been attributed to a phenomenon known as critical surface albedo regime, which is a range of surface albedos for which the top-of-atmosphere reflectance has minimal sensitivity to aerosol optical thickness. This paper extends the concept of critical surface albedo for aerosol layer height retrievals in the oxygen A band, and discusses its implications. The underlying physics are introduced by analysing the top-of-atmosphere reflectance spectrum as a sum of atmospheric path contribution and surface contribution, obtained using a radiative transfer model. Furthermore, error analysis of an aerosol layer height retrieval algorithm is conducted over dark and bright surfaces to show the dependence on surface reflectance. The analysis shows that the derivative with respect to aerosol layer height of the atmospheric path contribution to the top-of-atmosphere reflectance is opposite in sign to that of the surface contribution - an increase in surface brightness results in a decrease in information content. In the case of aerosol optical thickness, these derivatives are anti-correlated, leading to large retrieval errors in high surface albedo regimes. The consequence of this anti-correlation is demonstrated with measured spectra in the oxygen A band from the GOME-2 instrument on board the Metop-A satellite over the 2010 Russian wildfires incident.

  12. Noise Assessment and Error Analysis of GNSS Reflectometry Data for Water Surface Altimetry

    Science.gov (United States)

    Mendes, Tiago; Castro, Rita; Peres, Tiago; Carola, Jorge; Bandeiras, Jorge; Catarino, Nuno; Antunes, Carlos; Freire da Silva, Pedro

    2015-04-01

    The field of GNSS reflectometry has been gaining a lot of popularity in recent years, mostly because of its potential to generate multiple types of measurements on a global scale with a high repeatability rate. However, the challenge is to operationalize a GNSS reflectometry system with accuracy compatible with other technologies, such as satellite altimetry. Deimos Engenharia is currently leading the FP7 E-GEM project, which aims to evolve the current status of GNSS reflectometry in order to allow the implementation of operational applications (mainly in the domains of ocean altimetry and scatterometry). Within E-GEM Deimos is developing a ground instrument to collect reflectometry observables - namely, direct and reflected waveforms or autocorrelation functions that will be used to derive sea surface altimetry through the delay differences method. This paper presents the work that has been done in order to assess the expected noise for the Galileo E1 signal for the direct and reflected waveforms, as well as their delay differences that are used to obtain the final altimetric result. Several methods were used to estimate the noise, including tracking methods, fits and maxima determination, and the comparison with Gaussian noise expectations is performed. The results obtained using different methods will be presented. The Water Surface Altimetry is also derived, based on the delay differences and satellite elevation, and compared with concurrent tide gauge data. It can be concluded that without integration the noise level is of the order of 8 m, in good agreement with the expected values, taken into account that no filtering is applied. Moreover, some effects were detected and were not eliminated with delay differences, indicating that other error sources may be contributing to the noise (such as unwanted multipath). When the integration is performed the noise level is of the order of 50 cm, and for the delay differences the noise seems to approach a Gaussian

  13. Figure and finish characterization of high performance metal mirrors

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Church, E.L.

    1991-10-01

    Most metal mirrors currently used in synchrotron radiation (SR) beam lines to reflect soft x-rays are made of electroless nickel plate on an aluminum substrate. This material combination has allowed optical designers to incorporate exotic cylindrical aspheres into grazing incidence x-ray beam-handling systems by taking advantage of single-point diamond machining techniques. But the promise of high-quality electroless nickel surfaces has generally exceeded the performance. We will examine the evolution of electroless nickel surfaces through a study of the quality of mirrors delivered for use at the National Synchrotron Light Source over the past seven years. We have developed techniques to assess surface quality based on the measurement of surface roughness and figure errors with optical profiling instruments. It is instructive to see how the quality of the surface is related to the complexity of the machine operations required to produce it

  14. Student figures in friction

    DEFF Research Database (Denmark)

    Nielsen, Gritt B.

    , students' room for participation in their own learning, influenced by demands for efficiency, flexibility and student-centred education. The thesis recasts the anthropological endeavour as one of ‘figuration work'. That is, ‘frictional events' are explored as moments when conflicting figures...

  15. A Torque Error Compensation Algorithm for Surface Mounted Permanent Magnet Synchronous Machines with Respect to Magnet Temperature Variations

    Directory of Open Access Journals (Sweden)

    Chang-Seok Park

    2017-09-01

    Full Text Available This paper presents a torque error compensation algorithm for a surface mounted permanent magnet synchronous machine (SPMSM through real time permanent magnet (PM flux linkage estimation at various temperature conditions from medium to rated speed. As known, the PM flux linkage in SPMSMs varies with the thermal conditions. Since a maximum torque per ampere look up table, a control method used for copper loss minimization, is developed based on estimated PM flux linkage, variation of PM flux linkage results in undesired torque development of SPMSM drives. In this paper, PM flux linkage is estimated through a stator flux linkage observer and the torque error is compensated in real time using the estimated PM flux linkage. In this paper, the proposed torque error compensation algorithm is verified in simulation and experiment.

  16. The effect of TWD estimation error on the geometry of machined surfaces in micro-EDM milling

    DEFF Research Database (Denmark)

    Puthumana, Govindan; Bissacco, Giuliano; Hansen, Hans Nørgaard

    In micro EDM (electrical discharge machining) milling, tool electrode wear must be effectively compensated in order to achieve high accuracy of machined features [1]. Tool wear compensation in micro-EDM milling can be based on off-line techniques with limited accuracy such as estimation...... and statistical characterization of the discharge population [3]. The TWD based approach permits the direct control of the position of the tool electrode front surface. However, TWD estimation errors will generate a self-amplifying error on the tool electrode axial depth during micro-EDM milling. Therefore....... The error propagation effect is demonstrated through a software simulation tool developed by the authors for determination of the correct TWD for subsequent use in compensation of electrode wear in EDM milling. The implemented model uses an initial arbitrary estimation of TWD and a single experiment...

  17. Figure S1 Figure S2

    Indian Academy of Sciences (India)

    WINTEC

    6.8. 7.0. 7.2. 7.4. 7.6. 7.8. 8.0. 8.2. 8.4. 8.6. 8.8 ppm. 0.0. 1.8. 9.7. 5.4. 6.9. 8.1. 9.0. 10.8. 3.2. 10.3. Figure S3. NMR titration of DAN-Ia acid with NDI at 30% MeOH in CDCl3. The numbers represent the mole ratios of the DAN-acid to the repeat unit.

  18. Solution algorithm of dwell time in slope-based figuring model

    Science.gov (United States)

    Li, Yong; Zhou, Lin

    2017-10-01

    Surface slope profile is commonly used to evaluate X-ray reflective optics, which is used in synchrotron radiation beam. Moreover, the measurement result of measuring instrument for X-ray reflective optics is usually the surface slope profile rather than the surface height profile. To avoid the conversion error, the slope-based figuring model is introduced introduced by processing the X-ray reflective optics based on surface height-based model. However, the pulse iteration method, which can quickly obtain the dell time solution of the traditional height-based figuring model, is not applied to the slope-based figuring model because property of the slope removal function have both positive and negative values and complex asymmetric structure. To overcome this problem, we established the optimal mathematical model for the dwell time solution, By introducing the upper and lower limits of the dwell time and the time gradient constraint. Then we used the constrained least squares algorithm to solve the dwell time in slope-based figuring model. To validate the proposed algorithm, simulations and experiments are conducted. A flat mirror with effective aperture of 80 mm is polished on the ion beam machine. After iterative polishing three times, the surface slope profile error of the workpiece is converged from RMS 5.65 μrad to RMS 1.12 μrad.

  19. Error in Radar-Derived Soil Moisture due to Roughness Parameterization: An Analysis Based on Synthetical Surface Profiles

    Directory of Open Access Journals (Sweden)

    Bernard De Baets

    2009-02-01

    Full Text Available In the past decades, many studies on soil moisture retrieval from SAR demonstrated a poor correlation between the top layer soil moisture content and observed backscatter coefficients, which mainly has been attributed to difficulties involved in the parameterization of surface roughness. The present paper describes a theoretical study, performed on synthetical surface profiles, which investigates how errors on roughness parameters are introduced by standard measurement techniques, and how they will propagate through the commonly used Integral Equation Model (IEM into a corresponding soil moisture retrieval error for some of the currently most used SAR configurations. Key aspects influencing the error on the roughness parameterization and consequently on soil moisture retrieval are: the length of the surface profile, the number of profile measurements, the horizontal and vertical accuracy of profile measurements and the removal of trends along profiles. Moreover, it is found that soil moisture retrieval with C-band configuration generally is less sensitive to inaccuracies in roughness parameterization than retrieval with L-band configuration.

  20. data for figures

    Data.gov (United States)

    U.S. Environmental Protection Agency — Figures 1-10 and Table 1. This dataset is associated with the following publication: Chang, S.Y., S. Arunachalam, A. Valencia, B. Naess, V. Isakov , M. Breen , T....

  1. Facts and Figures

    Science.gov (United States)

    ... Saves Lives Facts & Figures My Blood, Your Blood Blood Donation Types Did you know there is more than one type of blood donation? Learn more about blood donation types here. Blood Safety and Testing The blood supply ...

  2. Method of surface error visualization using laser 3D projection technology

    Science.gov (United States)

    Guo, Lili; Li, Lijuan; Lin, Xuezhu

    2017-10-01

    In the process of manufacturing large components, such as aerospace, automobile and shipping industry, some important mold or stamped metal plate requires precise forming on the surface, which usually needs to be verified, if necessary, the surface needs to be corrected and reprocessed. In order to make the correction of the machined surface more convenient, this paper proposes a method based on Laser 3D projection system, this method uses the contour form of terrain contour, directly showing the deviation between the actually measured data and the theoretical mathematical model (CAD) on the measured surface. First, measure the machined surface to get the point cloud data and the formation of triangular mesh; secondly, through coordinate transformation, unify the point cloud data to the theoretical model and calculate the three-dimensional deviation, according to the sign (positive or negative) and size of the deviation, use the color deviation band to denote the deviation of three-dimensional; then, use three-dimensional contour lines to draw and represent every coordinates deviation band, creating the projection files; finally, import the projection files into the laser projector, and make the contour line projected to the processed file with 1:1 in the form of a laser beam, compare the Full-color 3D deviation map with the projection graph, then, locate and make quantitative correction to meet the processing precision requirements. It can display the trend of the machined surface deviation clearly.

  3. Graphics of polar figure

    International Nuclear Information System (INIS)

    Macias B, L.R.

    1991-11-01

    The objective of this work, is that starting from a data file coming from a spectra that has been softened, and of the one that have been generated its coordinates to project it in stereographic form, to create the corresponding polar figure making use of the Cyber computer of the ININ by means of the GRAPHOS package. This work only requires a Beta, Fi and Intensity (I) enter data file. It starts of the existence of a softened spectra of which have been generated already with these data, making use of some language that in this case was FORTRAN for the Cyber computer, a program is generated supported in the Graphos package that allows starting of a reading of the Beta, Fi, I file, to generate the points in a stereographic projection and that it culminates with the graph of the corresponding polar figure. The program will request the pertinent information that is wanted to capture in the polar figure just as: date, name of the enter file, indexes of the polar figure, number of levels, radio of the stereographic projection (cms.), crystalline system to which belongs the sample, name the neuter graph file by create and to add the own general data. (Author)

  4. Surface-induced errors in target strength and position estimates during horizontal acoustic surveys

    Czech Academy of Sciences Publication Activity Database

    Balk, Helge; Sovegjarto, B.S.; Tušer, Michal; Frouzová, Jaroslava; Muška, Milan; Draštík, Vladislav; Baran, Roman; Kubečka, Jan

    2017-01-01

    Roč. 188, APR (2017), s. 149-156 ISSN 0165-7836 R&D Projects: GA MŠk(CZ) EE2.3.20.0204; GA ČR GAP504/12/1186 Institutional support: RVO:60077344 Keywords : hydroacoustics * surface boundary * shallow water * horizontal beaming * simulations Subject RIV: GL - Fishing OBOR OECD: Fishery Impact factor: 2.185, year: 2016

  5. Response Surface Modeling Tolerance and Inference Error Risk Specifications: Proposed Industry Standards

    Science.gov (United States)

    DeLoach, Richard

    2012-01-01

    This paper reviews the derivation of an equation for scaling response surface modeling experiments. The equation represents the smallest number of data points required to fit a linear regression polynomial so as to achieve certain specified model adequacy criteria. Specific criteria are proposed which simplify an otherwise rather complex equation, generating a practical rule of thumb for the minimum volume of data required to adequately fit a polynomial with a specified number of terms in the model. This equation and the simplified rule of thumb it produces can be applied to minimize the cost of wind tunnel testing.

  6. Diagnosing Model Errors in Simulations of Solar Radiation on Inclined Surfaces: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Yu; Sengupta, Manajit

    2016-06-01

    Transposition models have been widely used in the solar energy industry to simulate solar radiation on inclined PV panels. Following numerous studies comparing the performance of transposition models, this paper aims to understand the quantitative uncertainty in the state-of-the-art transposition models and the sources leading to the uncertainty. Our results suggest that an isotropic transposition model developed by Badescu substantially underestimates diffuse plane-of-array (POA) irradiances when diffuse radiation is perfectly isotropic. In the empirical transposition models, the selection of empirical coefficients and land surface albedo can both result in uncertainty in the output. This study can be used as a guide for future development of physics-based transposition models.

  7. Figure measurements of high-energy x-ray replicated optics

    Science.gov (United States)

    Gubarev, Mikhail V.; Ramsey, Brian D.; Kester, Thomas; Speegle, Chet O.; Engelhaupt, Darell; Martin, Greg

    2004-02-01

    We are developing grazing incidence x-ray optics for a balloon-borne hard-x-ray telescope (HERO). The HERO mirror shells are fabricated using electroform-nickel replication off super-polished cylindrical mandrels. One of the sources for mirror resolution error is departure of the shell figure from prescription. We have modified a Vertical-scan Long Trace Profilometer (VLTP) in order to measure the figure of the inner surface of the HERO mirror shells for diameters as small as 74 mm. Metrology of the figure, the microroughness, tilt angle, the circularity for the shell mirrors and the mandrels, as well as alignment procedures are discussed. Comparison of metrology of the mandrel and the shells is presented together with results from x-ray tests.

  8. The Impact of Model and Rainfall Forcing Errors on Characterizing Soil Moisture Uncertainty in Land Surface Modeling

    Science.gov (United States)

    Maggioni, V.; Anagnostou, E. N.; Reichle, R. H.

    2013-01-01

    The contribution of rainfall forcing errors relative to model (structural and parameter) uncertainty in the prediction of soil moisture is investigated by integrating the NASA Catchment Land Surface Model (CLSM), forced with hydro-meteorological data, in the Oklahoma region. Rainfall-forcing uncertainty is introduced using a stochastic error model that generates ensemble rainfall fields from satellite rainfall products. The ensemble satellite rain fields are propagated through CLSM to produce soil moisture ensembles. Errors in CLSM are modeled with two different approaches: either by perturbing model parameters (representing model parameter uncertainty) or by adding randomly generated noise (representing model structure and parameter uncertainty) to the model prognostic variables. Our findings highlight that the method currently used in the NASA GEOS-5 Land Data Assimilation System to perturb CLSM variables poorly describes the uncertainty in the predicted soil moisture, even when combined with rainfall model perturbations. On the other hand, by adding model parameter perturbations to rainfall forcing perturbations, a better characterization of uncertainty in soil moisture simulations is observed. Specifically, an analysis of the rank histograms shows that the most consistent ensemble of soil moisture is obtained by combining rainfall and model parameter perturbations. When rainfall forcing and model prognostic perturbations are added, the rank histogram shows a U-shape at the domain average scale, which corresponds to a lack of variability in the forecast ensemble. The more accurate estimation of the soil moisture prediction uncertainty obtained by combining rainfall and parameter perturbations is encouraging for the application of this approach in ensemble data assimilation systems.

  9. INFORMATIONAL MODEL OF MENTAL ROTATION OF FIGURES

    Directory of Open Access Journals (Sweden)

    V. A. Lyakhovetskiy

    2016-01-01

    Full Text Available Subject of Study.The subject of research is the information structure of objects internal representations and operations over them, used by man to solve the problem of mental rotation of figures. To analyze this informational structure we considered not only classical dependencies of the correct answers on the angle of rotation, but also the other dependencies obtained recently in cognitive psychology. Method.The language of technical computing Matlab R2010b was used for developing information model of the mental rotation of figures. Such model parameters as the number of bits in the internal representation, an error probability in a single bit, discrete rotation angle, comparison threshold, and the degree of difference during rotation can be changed. Main Results.The model reproduces qualitatively such psychological dependencies as the linear increase of time of correct answers and the number of errors on the angle of rotation for identical figures, "flat" dependence of the time of correct answers and the number of errors on the angle of rotation for mirror-like figures. The simulation results suggest that mental rotation is an iterative process of finding a match between the two figures, each step of which can lead to a significant distortion of the internal representation of the stored objects. Matching is carried out within the internal representations that have no high invariance to rotation angle. Practical Significance.The results may be useful for understanding the role of learning (including the learning with a teacher in the development of effective information representation and operations on them in artificial intelligence systems.

  10. Facts and figures

    International Nuclear Information System (INIS)

    1987-01-01

    Whereas most of the data are, naturally, about oil, a few figures concern nuclear energy. There is in Part 1 a flow chart of worldwide primary energy consumption by type, from 1974 to 1986, where nuclear energy consumption can be seen in relation to oil, gas, coal and hydro. The same is also given for the regions of the South. In section 3/18 the numbers of nuclear plants in construction and operation are listed separately for developing countries, centrally planned economies and industrialized countries, for 1986. (qui)

  11. Figures of transversality

    DEFF Research Database (Denmark)

    Gammeltoft, Tine

    2008-01-01

    In this article, I explore how prenatal screening is imbricated within state agendas, aspirations, and imaginings in contemporary Vietnam. In an effort to develop new ethnographic tropes for understanding the formation called "the state," I argue for a phenomenological take that emphasizes its...... affective and embodied aspects. Seeing the anomalous fetus as a "figure of transversality," as a critical focus for powerful imaginings and desires, I show how state–society relations in Vietnam are suffused by visceral affectivity and moral engagement. In the realm of reproduction, intense sentiments...... of anxiety, dread, desire, ambition, and hope tie together the state and its citizens, animating individual aspirations as well as national population policies....

  12. Figure out the Rhythm

    DEFF Research Database (Denmark)

    Knakkergaard, Martin

    Thinking in numbers, figures and systems plays a central part in our - at least scientific – understanding of musical matters. The kind of pre-order that the numbers - and also the systemic thinking - bring along seem to facilitate the access to and dealings with what we understand as fundamental...... to reflect. By means of a critical resume of an earlier analysis of rhythmical implications in Michael Jackson's "Give In To Me" this paper discusses these matters further and reflects upon arithmetic's influences and relevance for our understanding of music.......Thinking in numbers, figures and systems plays a central part in our - at least scientific – understanding of musical matters. The kind of pre-order that the numbers - and also the systemic thinking - bring along seem to facilitate the access to and dealings with what we understand as fundamental...... musical conditions. The number stands out as constituent of understanding in our views upon and dealings with frequency and relations between frequencies. The number as such becomes the lifeless agent of movement that without further notice is allowed to include - and systematise - the 'slow' frequencies...

  13. Preliminary figures for 1991

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Neste Corporation's net sales during 1991 totalled USD 12.6 billion, an increase of 11 % over the figure for 1990. The largest growth in net sales took place in Neste Oil's trading activities and sales of in-house-produced crude oil. In the chemicals sector. particular growth was recorded in resins production. Gas, Shipping and Exploration and Production performed slightly better than during 1990. Oil's performance remained satisfactory. The performance of Chemicals, however, fell back considerably, primarily, as a result of the worldwide drop in prices in the petrochemicals and plastics industries. As a result, the Corporation's overall result was substantially below the good level recorded in 1990. The Corporation's operating margin totalled USD 650 million

  14. KIAI: FIGUR ELITE PESANTREN

    Directory of Open Access Journals (Sweden)

    Mohammad Takdir Ilahi

    2015-10-01

    Full Text Available In a pesantren (Islamic boarding school, kiai is an strategic element. Javanese kiai mainly believe that a pesantren is a small palace where he becomes the ultimate source of power and authority. Even though he lives in a rural village, he becomes a member of elite group in social, politic and economic sides in the society. Kiai who leads big pesantren has successfully enlarged their power in term of nation so kiai could be accepted in national elite. The position of kiai is higher among all pesantren elements. The degree as an Islamic scholar is exactly a sacred degree in pesantren culture and tradition. Without his figure, it is impossible for a pesantren to develop and survive. Kiai holds an ultimate position on educate the behavior and morality of the santri (students to be qualified and compatible Muslims generation. Kiai is not only a leader but he is also the man behind the leadership itself in supporting the progress of Islamic education institution for Muslims generations.

  15. Figure and finish of grazing incidence mirrors

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Church, E.L.

    1989-08-01

    Great improvement has been made in the past several years in the quality of optical components used in synchrotron radiation (SR) beamlines. Most of this progress has been the result of vastly improved metrology techniques and instrumentation permitting rapid and accurate measurement of the surface finish and figure on grazing incidence optics. A significant theoretical effort has linked the actual performance of components used as x-ray wavelengths to their topological properties as measured by surface profiling instruments. Next-generation advanced light sources will require optical components and systems to have sub-arc second surface figure tolerances. This paper will explore the consequences of these requirements in terms of manufacturing tolerances to see if the present manufacturing state-of-the-art is capable of producing the required surfaces. 15 refs., 14 figs., 2 tabs

  16. Multi Function Heat Pulse Probes (MFHPP) to Estimate Ground Heat Flux and Reduce Surface Energy Budget Errors

    Science.gov (United States)

    Ciocca, Francesco; Sharma, Varun; Lunati, Ivan; Parlange, Marc B.

    2013-04-01

    Ground heat flux plays a crucial role in surface energy budget: an incorrect estimation of energy storage and heat fluxes in soils occur when probes such as heat flux plates are adopted, and these mistakes can account for up to 90% of the residual variance (Higgins, GRL, 2012). A promising alternative to heat flux plates is represented by Multi Function Heat Pulse Probes (MFHPP). They have proven to be accurate in thermal properties and heat fluxes estimation (e.g. Cobos, VZJ, 2003) and can be used to monitor and quantify subsurface evaporation in field experiments (Xiao et al., VZJ, 2011). We perform a laboratory experiment with controlled temperature in a small Plexiglas column (20cm diameter and 40cm height). The column is packed with homogeneously saturated sandy soil and equipped with three MFHPPs in the upper 4cm and thermocouples and dielectric soil moisture probes deeper. This configuration allows for accurate and simultaneous ground heat flux, soil moisture and subsurface evaporation measurements. Total evaporation is monitored using a precision scale, while an infrared gun and a long wave radiometer measure the soil skin temperature and the outgoing long-short wave radiation, respectively. A fan and a heat lamp placed above the column allow to mimick on a smaller and more controlled scale the field conditions induced by the diurnal cycle. At a reference height above the column relative humidity, wind speed and air temperature are collected. Results are interpreted by means of numerical simulations performed with an ad-hoc-developed numerical model that simulates coupled heat and moisture transfer in soils and is used to match and interpolate the temperature and soil moisture values got at finite depths within the column. Ground heat fluxes are then estimated by integrating over almost continuous, numerically simulated temperature profiles, which avoids errors due to use of discrete data (Lunati et al., WRR, 2012) and leads to a more reliable estimate of

  17. Immagini e Concetti in Geometria=The Figural and the Conceptual Components of Geometrical Concepts.

    Science.gov (United States)

    Mariotti, Maria Alessandra

    1992-01-01

    Discusses geometrical reasoning in the framework of the theory of Figural Concepts to highlight the interaction between the figural and conceptual components of geometrical concepts. Examples of students' difficulties and errors in geometrical reasoning are interpreted according to the internal tension that appears in figural concepts resulting…

  18. Edge effect correction using ion beam figuring.

    Science.gov (United States)

    Yang, Bing; Xie, Xuhui; Li, Furen; Zhou, Lin

    2017-11-10

    The edge effect is regarded as one of the most difficult technical issues for fabricating large primary mirrors, as it can greatly reduce the key performance of the optical system. Ion beam figuring (IBF) has the advantage of no edge effect, so we can use it to remove high points on the edge and improve surface accuracy. The edge local correction method (ELCM) of IBF processes only the surface edge zone, and is very different from the current full caliber figuring method (FCFM). Therefore, it is necessary to study the ELCM of IBF. In this paper, the key factors of ELCM are analyzed, such as dwell time algorithm, edge data extension methods, and the outward dimension of the starting figuring point. At the same time, the distinctions between ELCM and FCFM are compared. Finally, a 142 mm diameter fused silica mirror is fabricated to verify the validity of the theoretical of ELCM. The experimental results indicate that the figuring precision and efficiency can be obviously improved by ELCM.

  19. Facts and figures in 2004

    International Nuclear Information System (INIS)

    Lavergne, R.; Meuric, L.; Scherrer, S.; Paquel, V.; Louati, S.; Thienard, H.

    2005-01-01

    This document gathers a series of articles dedicated to the situation of the energy sector in France at the end of 2004: -) the energy balance sheet, -) the trend concerning energy consumption since 1973, -) the energy bill, -) figures about electrical power, -) figures about natural gas, -) figures about solid fossil fuels, -) figures about oil, and -) figures about renewable energies. The important fact to note is that the energy bill has soared by 24.1% to reach 28.35 milliard euros which represents 1.75% of the gross national product (PIB). The evolution over the year 2004 of the factors that contribute to the level of the energy bill is: - the import-export energy quantity differential: +7.5%, - the import-export energy cost differential (in Usa dollar): +27.1%, and - the fall of the dollar: -9.1%. (A.C.)

  20. Evaluation of in-vivo measurement errors associated with micro-computed tomography scans by means of the bone surface distance approach.

    Science.gov (United States)

    Lu, Yongtao; Boudiffa, Maya; Dall'Ara, Enrico; Bellantuono, Ilaria; Viceconti, Marco

    2015-11-01

    In vivo micro-computed tomography (µCT) scanning is an important tool for longitudinal monitoring of the bone adaptation process in animal models. However, the errors associated with the usage of in vivo µCT measurements for the evaluation of bone adaptations remain unclear. The aim of this study was to evaluate the measurement errors using the bone surface distance approach. The right tibiae of eight 14-week-old C57BL/6 J female mice were consecutively scanned four times in an in vivo µCT scanner using a nominal isotropic image voxel size (10.4 µm) and the tibiae were repositioned between each scan. The repeated scan image datasets were aligned to the corresponding baseline (first) scan image dataset using rigid registration and a region of interest was selected in the proximal tibia metaphysis for analysis. The bone surface distances between the repeated and the baseline scan datasets were evaluated. It was found that the average (±standard deviation) median and 95th percentile bone surface distances were 3.10 ± 0.76 µm and 9.58 ± 1.70 µm, respectively. This study indicated that there were inevitable errors associated with the in vivo µCT measurements of bone microarchitecture and these errors should be taken into account for a better interpretation of bone adaptations measured with in vivo µCT. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

  1. A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces

    International Nuclear Information System (INIS)

    Li, Bin; Li, Feng; Liu, Hongqi; Cai, Hui; Mao, Xinyong; Peng, Fangyu

    2014-01-01

    This study presents a novel measurement strategy and an error-compensation model for the measurement of large-scale free-form surfaces in on-machine laser measurement systems. To improve the measurement accuracy, the effects of the scan depth, surface roughness, incident angle and azimuth angle on the measurement results were investigated experimentally, and a practical measurement strategy considering the position and orientation of the sensor is presented. Also, a semi-quantitative model based on geometrical optics is proposed to compensate for the measurement error associated with the incident angle. The normal vector of the measurement point is determined using a cross-curve method from the acquired surface data. Then, the azimuth angle and incident angle are calculated to inform the measurement strategy and error-compensation model, respectively. The measurement strategy and error-compensation model are verified through the measurement of a large propeller blade on a heavy machine tool in a factory environment. The results demonstrate that the strategy and the model are effective in increasing the measurement accuracy. (paper)

  2. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... pocket spending. Take action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history ... State The 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease ...

  3. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Facts and Figures report contains data on the impact of this disease in every state across the nation. Click below to see the effect that Alzheimer's is having in your state. Read ...

  4. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... home care. Take action. Become an advocate SPECIAL REPORT: FINANCIAL AND PERSONAL BENEFITS OF EARLY DIAGNOSIS Early ... State The 2018 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease ...

  5. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... THE 10 SIGNS Alzheimer's Disease Facts in Each State The 2018 Alzheimer's Disease Facts and Figures report ... on the impact of this disease in every state across the nation. Click below to see the ...

  6. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in Each State The 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease in every ...

  7. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... same category as other chronic diseases, such as cardiovascular disease or diabetes, which can be ... Disease Facts and Figures report contains data on the impact of this disease ...

  8. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's & Dementia >> Home Text size: A A A 2018 Alzheimer's Disease Facts and Figures Download the full ... all ages are living with Alzheimer's dementia in 2018. This number includes an estimated 5.5 million ...

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: ... twice as high. Invest in a world without Alzheimer's. Donate Caregivers In 2016, 15.9 million family ...

  10. R-X Modeling Figures

    Energy Technology Data Exchange (ETDEWEB)

    Goda, Joetta Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Miller, Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Grogan, Brandon [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-26

    This document contains figures that will be included in an ORNL final report that details computational efforts to model an irradiation experiment performed on the Godiva IV critical assembly. This experiment was a collaboration between LANL and ORNL.

  11. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download ... spending. Take action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history of medicine, ...

  12. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Dementia >> Home Text size: A A A 2018 Alzheimer's Disease Facts and Figures Download the full report: Download ... worried about memory loss? KNOW THE 10 SIGNS Alzheimer's Disease Facts in Each State The 2018 Alzheimer's Disease ...

  13. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Dementia >> Home Text size: A A A 2018 Alzheimer's Disease Facts and Figures Download the full report: ... twice as high. Invest in a world without Alzheimer's. Donate Caregivers Eighty-three percent of the help ...

  14. Alzheimer's Disease Facts and Figures

    Science.gov (United States)

    ... Dementia >> Home Text size: A A A 2018 Alzheimer's Disease Facts and Figures Download the full report: ... twice as high. Invest in a world without Alzheimer's. Donate Caregivers Eighty-three percent of the help ...

  15. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... RESEARCH. Read More Alzheimer's Disease Facts in Each State The 2017 Alzheimer's Disease Facts and Figures report ... on the impact of this disease in every state across the nation. Click below to see the ...

  16. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Home Text size: A A A 2018 Alzheimer's Disease Facts and Figures Download the full report: Download ... about memory loss? KNOW THE 10 SIGNS Alzheimer's Disease Facts in Each State The 2018 Alzheimer's Disease ...

  17. Investigating the influence of LiDAR ground surface errors on the utility of derived forest inventories

    Science.gov (United States)

    Wade T. Tinkham; Alistair M. S. Smith; Chad Hoffman; Andrew T. Hudak; Michael J. Falkowski; Mark E. Swanson; Paul E. Gessler

    2012-01-01

    Light detection and ranging, or LiDAR, effectively produces products spatially characterizing both terrain and vegetation structure; however, development and use of those products has outpaced our understanding of the errors within them. LiDAR's ability to capture three-dimensional structure has led to interest in conducting or augmenting forest inventories with...

  18. Ultrafast all-optical switching and error-free 10 Gbit/s wavelength conversion in hybrid InP-silicon on insulator nanocavities using surface quantum wells

    International Nuclear Information System (INIS)

    Bazin, Alexandre; Monnier, Paul; Beaudoin, Grégoire; Sagnes, Isabelle; Raj, Rama; Lenglé, Kevin; Gay, Mathilde; Bramerie, Laurent; Braive, Rémy; Raineri, Fabrice

    2014-01-01

    Ultrafast switching with low energies is demonstrated using InP photonic crystal nanocavities embedding InGaAs surface quantum wells heterogeneously integrated to a silicon on insulator waveguide circuitry. Thanks to the engineered enhancement of surface non radiative recombination of carriers, switching time is obtained to be as fast as 10 ps. These hybrid nanostructures are shown to be capable of achieving systems level performance by demonstrating error free wavelength conversion at 10 Gbit/s with 6 mW switching powers

  19. Surface characterization protocol for precision aspheric optics

    Science.gov (United States)

    Sarepaka, RamaGopal V.; Sakthibalan, Siva; Doodala, Somaiah; Panwar, Rakesh S.; Kotaria, Rajendra

    2017-10-01

    In Advanced Optical Instrumentation, Aspherics provide an effective performance alternative. The aspheric fabrication and surface metrology, followed by aspheric design are complementary iterative processes for Precision Aspheric development. As in fabrication, a holistic approach of aspheric surface characterization is adopted to evaluate actual surface error and to aim at the deliverance of aspheric optics with desired surface quality. Precision optical surfaces are characterized by profilometry or by interferometry. Aspheric profiles are characterized by contact profilometers, through linear surface scans to analyze their Form, Figure and Finish errors. One must ensure that, the surface characterization procedure does not add to the resident profile errors (generated during the aspheric surface fabrication). This presentation examines the errors introduced post-surface generation and during profilometry of aspheric profiles. This effort is to identify sources of errors and is to optimize the metrology process. The sources of error during profilometry may be due to: profilometer settings, work-piece placement on the profilometer stage, selection of zenith/nadir points of aspheric profiles, metrology protocols, clear aperture - diameter analysis, computational limitations of the profiler and the software issues etc. At OPTICA, a PGI 1200 FTS contact profilometer (Taylor-Hobson make) is used for this study. Precision Optics of various profiles are studied, with due attention to possible sources of errors during characterization, with multi-directional scan approach for uniformity and repeatability of error estimation. This study provides an insight of aspheric surface characterization and helps in optimal aspheric surface production methodology.

  20. Evaluation of errors for mass-spectrometric analysis with surface-ionization type mass-spectrometer (statistical evaluation of mass-discrimination effect)

    International Nuclear Information System (INIS)

    Wada, Y.

    1981-01-01

    The surface-ionization type mass-spectrometer is widely used as an apparatus for quality assurance, accountability and safeguarding of nuclear materials, and for this analysis it has become an important factor to statistically evaluate an analytical error which consists of a random error and a systematic error. The major factor of this systematic error was the mass-discrimination effect. In this paper, various assays for evaluating the factor of variation on the mass-discrimination effect were studied and the data obtained were statistically evaluated. As a result of these analyses, it was proved that the factor of variation on the mass-discrimination effect was not attributed to the acid concentration of sample, sample size on the filament and supplied voltage for a multiplier, but mainly to the filament temperature during the mass-spectrometric analysis. The mass-discrimination effect values β which were usually calculated from the measured data of uranium, plutonium or boron isotopic standard sample were not so significant dependently of the difference of U-235, Pu-239 or B-10 isotopic abundance. Furthermore, in the case of U and Pu, measurement conditions and the mass range of these isotopes were almost similar, and these values β were not statistically significant between U and Pu. On the other hand, the value β for boron was about a third of the value β for U or Pu, but compared with the coefficient of the correction on the mass-discrimination effect for the difference of mass-number, ΔM, these coefficient values were almost the same among U, Pu, and B.As for the isotopic analysis error of U, Pu, Nd and B, it was proved that the isotopic abundance of these elements and the isotopic analysis error were in a relationship of quadratic curves on a logarithmic-logarithmic scale

  1. Figure

    Indian Academy of Sciences (India)

    45

    mBraun, 120G,. Germany) was used to assemble the Swagelok cells. Lithium metal (Aldrich, 99.9%) was used as the counter electrode and Teklon (Anatek, USA) as the separator. All the tests were performed using 1 M. LiPF6 dissolved in the ...

  2. Forskerklummen: Figured Worlds of literacy

    DEFF Research Database (Denmark)

    Møller, Hanne

    2017-01-01

    Figured worlds”, altså forestillede verdener, er et teoretisk begreb, som i øjeblikket dukker op i flere og flere forskningssammenhænge. Det bliver anvendt på mange forskellige måder både inden for uddannelsesforskning og i forskning i literacy.......”Figured worlds”, altså forestillede verdener, er et teoretisk begreb, som i øjeblikket dukker op i flere og flere forskningssammenhænge. Det bliver anvendt på mange forskellige måder både inden for uddannelsesforskning og i forskning i literacy....

  3. State-dependent errors in a land surface model across biomes inferred from eddy covariance observations on multiple timescales

    NARCIS (Netherlands)

    Wang, T.; Brender, P.; Ciais, P.; Piao, S.; Mahecha, M.D.; Chevallier, F.; Reichstein, M.; Ottle, C.; Maignan, F.; Arain, A.; Bohrer, G.; Cescatti, A.; Kiely, G.; Law, B.E.; Lutz, M.; Montagnani, L.; Moors, E.J.

    2012-01-01

    Characterization of state-dependent model biases in land surface models can highlight model deficiencies, and provide new insights into model development. In this study, artificial neural networks (ANNs) are used to estimate the state-dependent biases of a land surface model (ORCHIDEE: ORganising

  4. Retorical figures in advertising language

    Directory of Open Access Journals (Sweden)

    Radenković-Šošić Bojana

    2012-01-01

    Full Text Available Promotional activities are very often based on advertising and diverse types of public relations. In order to attract consumers' attention and achieve communication goals set by the corporate strategy, advertisers frequently use rhetorical elements in advertising discourse. The advertisers try to convey a desired message and to communicate with the recipient of the message by using various rhetorical figures. It is argued that understanding the structure and function of rhetorical figures in advertising requires a "text- and reader-aware approach". The use of rhetorical figures in advertising has been overlooked in consumer research. This paper shows that the use of rhetorical elements in the advertising discourse is very frequent, but at the same time it is questioned if the function of the rhetorical figures is just a communication with the target market (which is a base of communication models and if the consequences of linguistic influences are much more serious. The complex nature of advertising language with various rhetorical figures (thropes and schemes do not just stimulate recipients to demonstrate a desirable behavior, but indirectly it constructs a concept of desirable lifestyle and it induces them to identify themselves with the explained model. Moreover, the analyzed corpus included advertising slogans of social responsible companies as well as advertising campaigns with elements of diverse ideologies. In the time of digitization and a rapid information flow, consumer's attention is less dedicated to the advertising messages. Therefore, it should be expected that in the future advertisers will have to adjust linguistic, audio and visual techniques to the unfocused message recipients.

  5. Medication Errors

    Science.gov (United States)

    ... for You Agency for Healthcare Research and Quality: Medical Errors and Patient Safety Centers for Disease Control and ... Quality Chasm Series National Coordinating Council for Medication Error Reporting and Prevention ... Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & ...

  6. Calculating and controlling the error of discrete representations of Pareto surfaces in convex multi-criteria optimization.

    Science.gov (United States)

    Craft, David

    2010-10-01

    A discrete set of points and their convex combinations can serve as a sparse representation of the Pareto surface in multiple objective convex optimization. We develop a method to evaluate the quality of such a representation, and show by example that in multiple objective radiotherapy planning, the number of Pareto optimal solutions needed to represent Pareto surfaces of up to five dimensions grows at most linearly with the number of objectives. The method described is also applicable to the representation of convex sets. Copyright © 2009 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  7. Surface Gradient Integrated Profiler for X-ray and EUV Optics--Calibration of the rotational angle error of the rotary encoders

    International Nuclear Information System (INIS)

    Higashi, Yasuo; Kume, Tatsuya; Enami, Kazuhiro; Ueno, Kenji; Mori, Yuzo; Takaie, Yuichi; Endo, Katsuyoshi; Yamauchi, Kazuto; Yamamura, Kazuya; Sano, Yasuhisa

    2007-01-01

    A new ultraprecision profiler has been developed to measure for example asymmetric and aspheric profiles. The principle of our measuring method is that the normal vector at each point on the surface is determined by making the incident light beam on the mirror surface and the reflected beam at that point coincident. The gradient at each point is calculated from the normal vector, and the surface profile is then obtained by integrating the gradients. The measuring instrument was designed in accordance with the above principle for the measuring method and is called Surface Gradient Integrated Profiler (SGIP). In the design, four ultraprecision goniometers were applied to adjust the light axis for the normal vector measurement. These goniostages make it possible to attain an angular resolution of 0.018 μ radian by electrically dividing a pulse of the rotary encoder. The surface gradients are determined only by the rotational angle of goniometers. Thus in the measuring instrument, the most important factor is the accuracy of the normal vectors measured by the goniometers. To attain an accuracy of 0.1 μ radian, we developed a system for correcting the rotational angle error of the goniometers in which the trigonometric measuring method is utilized for geometrical angle determination

  8. Third quarter 2005 sales figures

    International Nuclear Information System (INIS)

    2005-01-01

    With manufacturing facilities in over 40 countries and a sales network in over 100, AREVA offers customers technological solutions for nuclear power generation and electricity transmission and distribution. The group also provides interconnect systems to the telecommunications, computer and automotive markets. This document presents the sales figures of the group for the third quarter of 2005: sales revenues in the front end division, in the reactor and services division, in the back end division and in the transmission and distribution division

  9. The Development of a Differential Deposition Technique for Figure Correction in Grazing Incidence Optics

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose the development of a physical-vapor-deposition coating technique to correct residual figure errors in grazing-incidence optics. The process involves...

  10. Investigating Surface Bias Errors in the Weather Research and Forecasting (WRF) Model using a Geographic Information System (GIS)

    Science.gov (United States)

    2015-02-01

    Mlawer et al. 1997) is used for long wave radiation and the Dudhia (1989) scheme for shortwave radiation . The Noah land surface model (Chen and...decreases the background turbulent kinetic energy and alters the diagnosis of the boundary layer depth used for model output and data assimilation...Kain 2004) cumulus parameterization is used only on the 9-km outer domain. For radiation , the Rapid Radiative Transfer Model (RRTM) parameterization

  11. Operator errors

    International Nuclear Information System (INIS)

    Knuefer; Lindauer

    1980-01-01

    Besides that at spectacular events a combination of component failure and human error is often found. Especially the Rasmussen-Report and the German Risk Assessment Study show for pressurised water reactors that human error must not be underestimated. Although operator errors as a form of human error can never be eliminated entirely, they can be minimized and their effects kept within acceptable limits if a thorough training of personnel is combined with an adequate design of the plant against accidents. Contrary to the investigation of engineering errors, the investigation of human errors has so far been carried out with relatively small budgets. Intensified investigations in this field appear to be a worthwhile effort. (orig.)

  12. Les figures multiples du maire.

    Directory of Open Access Journals (Sweden)

    Olivier Lebraud

    2004-06-01

    Full Text Available Alors même que l’ensemble du personnel gouvernemental et parlementaire est sujet à une relative désaffection de la part des citoyens, les maires français jouissent, on le sait, d’une popularité qui fait d’eux les figures centrales de la scène politique. Au-delà de la décentralisation, qui a souvent renforcé leur image de décideurs, ils ont su tirer parti de la dimension identitaire qui caractérise l’échelon communal pour devenir les acteurs indispensables de la vie locale. ...

  13. Medical error

    African Journals Online (AJOL)

    QuickSilver

    is only when mistakes are recognised that learning can occur...All our previous medical training has taught us to fear error, as error is associated with blame. This fear may lead to concealment and this is turn can lead to fraud'. How real this fear is! All of us, during our medical training, have had the maxim 'prevention is.

  14. Hooke's figurations: a figural drawing attributed to Robert Hooke.

    Science.gov (United States)

    Hunter, Matthew C

    2010-09-20

    The experimental philosopher Robert Hooke (1635-1703) is known to have apprenticed to the leading painter Peter Lely on his first arrival in London in the late 1640s. Yet the relevance of Hooke's artistic training to his mature draughtsmanship and identity has remained unclear. Shedding light on that larger interpretive problem, this article argues for the attribution to Hooke of a figural drawing now in Tate Britain (T10678). This attributed drawing is especially interesting because it depicts human subjects and bears Hooke's name functioning as an artistic signature, both highly unusual features for his draughtsmanship. From evidence of how this drawing was collected and physically placed alongside images by leading artists in the early eighteenth century, I suggest how it can offer new insight into the reception of Hooke and his graphic work in the early Enlightenment.

  15. Slide-position errors degrade machined optical component quality

    International Nuclear Information System (INIS)

    Arnold, J.B.; Steger, P.J.; Burleson, R.R.

    1975-01-01

    An ultraprecision lathe is being developed at the Oak Ridge Y-12 Plant to fabricate optical components for use in high-energy laser systems. The lathe has the capability to produce virtually any shape mirror which is symmetrical about an axis of revolution. Two basic types of mirrors are fabricated on the lathe, namely: (1) mirrors which are machined using a single slide motion (such as flats and cylinders), and (2) mirrors which are produced by two-coordinated slide motions (such as hyperbolic reflectors; large, true-radius reflectors, and other contoured-surface reflectors). The surface-finish quality of typical mirrors machined by a single axis of motion is better than 13 nm, peak to valley, which is an order of magnitude better than the surface finishes of mirrors produced by two axes of motion. Surface finish refers to short-wavelength-figure errors that are visibly detectable. The primary cause of the inability to produce significantly better surface finishes on contoured mirrors has been determined as positional errors which exist in the slide positioning systems. The correction of these errors must be accomplished before contoured surface finishes comparable to the flat and cylinder can be machined on the lathe

  16. Impact of errors in the downwelling irradiances on simulations of snow water equivalent, snow surface temperature, and the snow energy balance

    Science.gov (United States)

    Lapo, Karl E.; Hinkelman, Laura M.; Raleigh, Mark S.; Lundquist, Jessica D.

    2015-03-01

    The forcing irradiances (downwelling shortwave and longwave irradiances) are the primary drivers of snowmelt; however, in complex terrain, few observations, the use of estimated irradiances, and the influence of topography and elevation all lead to uncertainties in these radiative fluxes. The impact of uncertainties in the forcing irradiances on simulations of snow is evaluated in idealized modeling experiments. Two snow models of contrasting complexity, the Utah Energy Balance Model (UEB) and the Snow Thermal Model (SNTHERM), are forced with irradiances with prescribed errors of the structure and magnitude representative of those found in methods for estimating the downwelling irradiances. Relatively modest biases have substantial impacts on simulated snow water equivalent (SWE) and surface temperature (Ts) across a range of climates, whereas random noise at the daily scale has a negligible effect on modeled SWE and Ts. Shortwave biases have a smaller SWE impact, due to the influence of albedo, and Ts impact, due to their diurnal cycle, compared to equivalent longwave biases. Warmer sites exhibit greater sensitivity to errors when evaluated using SWE, while colder sites exhibit more sensitivity as evaluated using Ts. The two models displayed different sensitivity and responses to biases. The stability feedback in the turbulent fluxes explains differences in Ts between models in the negative longwave bias scenarios. When the models diverge during melt events, differences in the turbulent fluxes and internal energy change of the snow are found to be responsible. From this analysis, we suggest model evaluations use Ts in addition to SWE.

  17. Statistical and signal processing concepts in surface metrology

    International Nuclear Information System (INIS)

    Church, E.L.; Takacs, P.Z.

    1986-01-01

    This paper proposes the use of a simple two-scale model of surface roughness for testing and specifying the topographic figure and finish of synchrotron-radiation mirrors. In this approach the effects of figure and finish are described in terms of their slope distribution and power spectrum, respectively, which are then combined with the system point spread function to produce a composite image. The result can be used to predict mirror performance or to translate design requirements into manufacturing specifications. Pacing problems in this approach are the development of a practical long-trace slope-profiling instrument and realistic statistical models for figure and finish errors

  18. Winkling out MAFF's flawed figures

    International Nuclear Information System (INIS)

    Green, P.; Cassidy, N.

    1993-01-01

    Significant errors in the way the Ministry of Agriculture, Fisheries and Food (MAFF) assesses the radiation dose received by people exposed to Sellafield marine discharges have been revealed by Friends of the Earth (FoE). MAFF's dose estimates of the dose received by the people receiving the largest radiation dose as a result of the discharges from Sellafield, those eating the fish and shellfish from the Sellafield area, is challenged. (author)

  19. Finding Figurative Language in "The Phantom Tollbooth."

    Science.gov (United States)

    Hinton, Lisa

    This lesson is an exploration of figurative language using the novel "The Phantom Tollbooth" and various Web resources. Students examine figurative language in the story and create a chart representing the literal and figurative meanings of words and phrases. During the four to eight 40-minute class sessions, middle school students will: read the…

  20. Einstein's error

    International Nuclear Information System (INIS)

    Winterflood, A.H.

    1980-01-01

    In discussing Einstein's Special Relativity theory it is claimed that it violates the principle of relativity itself and that an anomalous sign in the mathematics is found in the factor which transforms one inertial observer's measurements into those of another inertial observer. The apparent source of this error is discussed. Having corrected the error a new theory, called Observational Kinematics, is introduced to replace Einstein's Special Relativity. (U.K.)

  1. Evaluation of OSCAR ocean surface current product in the tropical ...

    Indian Academy of Sciences (India)

    combined fashion, have contributed to the superior performance of the present algorithm for generat- ing ocean surface current. Validation and error analysis of the OSCAR pro- ..... EC (figure 4) through the appearance of strong semiannual periodicity. The SEC peaks in July, the peak being smoother in OSCAR climatology.

  2. Improved Methodology for Surface and Atmospheric Soundings, Error Estimates, and Quality Control Procedures: the AIRS Science Team Version-6 Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2014-01-01

    The AIRS Science Team Version-6 AIRS/AMSU retrieval algorithm is now operational at the Goddard DISC. AIRS Version-6 level-2 products are generated near real-time at the Goddard DISC and all level-2 and level-3 products are available starting from September 2002. This paper describes some of the significant improvements in retrieval methodology contained in the Version-6 retrieval algorithm compared to that previously used in Version-5. In particular, the AIRS Science Team made major improvements with regard to the algorithms used to 1) derive surface skin temperature and surface spectral emissivity; 2) generate the initial state used to start the cloud clearing and retrieval procedures; and 3) derive error estimates and use them for Quality Control. Significant improvements have also been made in the generation of cloud parameters. In addition to the basic AIRS/AMSU mode, Version-6 also operates in an AIRS Only (AO) mode which produces results almost as good as those of the full AIRS/AMSU mode. This paper also demonstrates the improvements of some AIRS Version-6 and Version-6 AO products compared to those obtained using Version-5.

  3. On-orbit figure sensing and figure correction control for 0.5 arc-second adjustable X-ray optics

    Science.gov (United States)

    Reid, Paul

    changed constantly at several cycles/sec (active). In our approach, the mirror figure is corrected based on ground measurements, accounting for figure errors due to mirror manufacturing, mounting induced deformations, modeled gravity release, and modeled on-orbit thermal effects. The piezoelectric strain monitoring we seek to develop in this program extends adjustable mirror technology development, as it enables efficient adjustment and correction of mirror figure on-orbit, as required. This unprecedented level of system robustness will make telescopes less expensive to build because requirements for the non-optical systems can be looser, and it will also make the system more resistant to degradation, promoting mission success. The largest drivers for changes from ground calibration to on-orbit performance are piezoelectric material aging and an unexpected thermal environment (i.e., larger gradients than modeled or other thermal control system problem). Developing the capability to accurately monitor the health of each piezoelectric cell and the local mirror surface temperature will enable the real time sensing of any of these potential issues, help determine the cause, and enable corrections via updating models of on-orbit conditions and re-optimizing the required piezoelectric cell voltages for mirror figure correction. Our 3 year research program includes the development of the strain monitoring technology, its deposition on the adjustable optics, modeling and performance simulation, accelerated lifetime testing, and optical and electrical metrology of sample adjustable optics that incorporate monitoring sensors. Development of the capability to remotely monitor piezo performance and temperature to necessary precision will vastly improve reliability of the SMART-X mission concept, or the sub-arc-second X-ray Surveyor mission described in the 2013 NASA Astrophysics Roadmap, Enduring Quests Daring Visions.

  4. Refractive Errors

    Science.gov (United States)

    ... Conditions Frequently Asked Questions Español Condiciones Chinese Conditions Refractive Errors in Children En Español Read in Chinese How does the ... birth and can occur at any age. The prevalence of myopia is low in US children under the age of eight, but much higher ...

  5. Errors in practical measurement in surveying, engineering, and technology

    International Nuclear Information System (INIS)

    Barry, B.A.; Morris, M.D.

    1991-01-01

    This book discusses statistical measurement, error theory, and statistical error analysis. The topics of the book include an introduction to measurement, measurement errors, the reliability of measurements, probability theory of errors, measures of reliability, reliability of repeated measurements, propagation of errors in computing, errors and weights, practical application of the theory of errors in measurement, two-dimensional errors and includes a bibliography. Appendices are included which address significant figures in measurement, basic concepts of probability and the normal probability curve, writing a sample specification for a procedure, classification, standards of accuracy, and general specifications of geodetic control surveys, the geoid, the frequency distribution curve and the computer and calculator solution of problems

  6. The latest figures on uranium

    International Nuclear Information System (INIS)

    Vance, R.

    2010-01-01

    According to the latest figures on uranium, soon to be published by the NEA, uranium resources, production and demand are all on the rise. Exploration efforts have increased recently in line with the expected expansion of nuclear energy in the coming years. Total identified resources have grown and are now sufficient to cover 100 years of supply at 2008 rates of consumption. Costs of production have, however, also increased. This article is based on the latest edition of the 'Red Book', Uranium 2009: Resources, Production and Demand, which presents the results of the most recent biennial review of world uranium market fundamentals and a statistical profile of the world uranium industry as of 1 January 2009. It contains official data provided by OECD Nuclear Energy Agency (NEA) and International Atomic Energy Agency (IAEA) member countries on uranium exploration, resources, production and reactor-related requirements. Projections of nuclear generating capacity and reactor-related uranium requirements through 2035 are also provided as well as a discussion of long-term uranium supply and demand issues. Despite recent declines stemming from the global financial crisis, world demand for electricity is expected to continue to grow significantly over the next several decades to meet the needs of an increasing population and economic growth. The recognition by an increasing number of governments that nuclear power can produce competitively priced, base-load electricity that is essentially free of greenhouse gas emissions, coupled with the role that nuclear can play in enhancing security of energy supply, increases the prospects for growth in nuclear generating capacity, although the magnitude of that growth remains to be determined. Regardless of the role that nuclear energy ultimately plays in meeting rising electricity demand, the uranium resource base is more than adequate to meet projected requirements. Meeting even high-case requirements to 2035 would consume less

  7. Every photon counts: improving low, mid, and high-spatial frequency errors on astronomical optics and materials with MRF

    Science.gov (United States)

    Maloney, Chris; Lormeau, Jean Pierre; Dumas, Paul

    2016-07-01

    Many astronomical sensing applications operate in low-light conditions; for these applications every photon counts. Controlling mid-spatial frequencies and surface roughness on astronomical optics are critical for mitigating scattering effects such as flare and energy loss. By improving these two frequency regimes higher contrast images can be collected with improved efficiency. Classically, Magnetorheological Finishing (MRF) has offered an optical fabrication technique to correct low order errors as well has quilting/print-through errors left over in light-weighted optics from conventional polishing techniques. MRF is a deterministic, sub-aperture polishing process that has been used to improve figure on an ever expanding assortment of optical geometries, such as planos, spheres, on and off axis aspheres, primary mirrors and freeform optics. Precision optics are routinely manufactured by this technology with sizes ranging from 5-2,000mm in diameter. MRF can be used for form corrections; turning a sphere into an asphere or free form, but more commonly for figure corrections achieving figure errors as low as 1nm RMS while using careful metrology setups. Recent advancements in MRF technology have improved the polishing performance expected for astronomical optics in low, mid and high spatial frequency regimes. Deterministic figure correction with MRF is compatible with most materials, including some recent examples on Silicon Carbide and RSA905 Aluminum. MRF also has the ability to produce `perfectly-bad' compensating surfaces, which may be used to compensate for measured or modeled optical deformation from sources such as gravity or mounting. In addition, recent advances in MRF technology allow for corrections of mid-spatial wavelengths as small as 1mm simultaneously with form error correction. Efficient midspatial frequency corrections make use of optimized process conditions including raster polishing in combination with a small tool size. Furthermore, a novel MRF

  8. On the Utilization of Ice Flow Models and Uncertainty Quantification to Interpret the Impact of Surface Radiation Budget Errors on Estimates of Greenland Ice Sheet Surface Mass Balance and Regional Estimates of Mass Balance

    Science.gov (United States)

    Schlegel, N.; Larour, E. Y.; Gardner, A. S.; Lang, C.; Miller, C. E.; van den Broeke, M. R.

    2016-12-01

    How Greenland ice flow may respond to future increases in surface runoff and to increases in the frequency of extreme melt events is unclear, as it requires detailed comprehension of Greenland surface climate and the ice sheet's sensitivity to associated uncertainties. With established uncertainty quantification tools run within the framework of Ice Sheet System Model (ISSM), we conduct decadal-scale forward modeling experiments to 1) quantify the spatial resolution needed to effectively force distinct components of the surface radiation budget, and subsequently surface mass balance (SMB), in various regions of the ice sheet and 2) determine the dynamic response of Greenland ice flow to variations in components of the net radiation budget. The Glacier Energy and Mass Balance (GEMB) software is a column surface model (1-D) that has recently been embedded as a module within ISSM. Using the ISSM-GEMB framework, we perform sensitivity analyses to determine how perturbations in various components of the surface radiation budget affect model output; these model experiments allow us predict where and on what spatial scale the ice sheet is likely to dynamically respond to changes in these parameters. Preliminary results suggest that SMB should be forced at at least a resolution of 23 km to properly capture dynamic ice response. In addition, Monte-Carlo style sampling analyses reveals that the areas with the largest uncertainty in mass flux are located near the equilibrium line altitude (ELA), upstream of major outlet glaciers in the North and West of the ice sheet. Sensitivity analysis indicates that these areas are also the most vulnerable on the ice sheet to persistent, far-field shifts in SMB, suggesting that continued warming, and upstream shift in the ELA, are likely to result in increased velocities, and consequentially SMB-induced thinning upstream of major outlet glaciers. Here, we extend our investigation to consider various components of the surface radiation

  9. The Vernier Caliper and Significant Figures.

    Science.gov (United States)

    Oberhofer, E. S.

    1985-01-01

    Misconceptions occur because the caliper is often read with the same significant figures as a meter stick; however, the precision of the vernier caliper is greater than the precision of a meter stick. Clarification of scale reading, precision of both tools, and significant figures are discussed. (JN)

  10. 49 CFR Appendix - Figures to Part 38

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures...

  11. Dress Images on Gold-foil Figures

    DEFF Research Database (Denmark)

    Mannering, Ulla; Andersson Strand, Eva Birgitta

    2009-01-01

    From the Late Iron Age settlement Sorte Muld on Bornholm both gold foil figures with depictions of costumes and textile tools can tell about textile production.......From the Late Iron Age settlement Sorte Muld on Bornholm both gold foil figures with depictions of costumes and textile tools can tell about textile production....

  12. Evolution of the Significant Figure Rules

    Science.gov (United States)

    Carter, Ashley R.

    2013-01-01

    Today, almost all introductory physics textbooks include standardized "rules" on how to find the number of significant figures in a calculated value. And yet, 30 years ago these rules were almost nonexistent. Why have we increased the role of significant figures in introductory classes, and should we continue this trend? A look back at…

  13. Figure-associated text summarization and evaluation.

    Science.gov (United States)

    Polepalli Ramesh, Balaji; Sethi, Ricky J; Yu, Hong

    2015-01-01

    Biomedical literature incorporates millions of figures, which are a rich and important knowledge resource for biomedical researchers. Scientists need access to the figures and the knowledge they represent in order to validate research findings and to generate new hypotheses. By themselves, these figures are nearly always incomprehensible to both humans and machines and their associated texts are therefore essential for full comprehension. The associated text of a figure, however, is scattered throughout its full-text article and contains redundant information content. In this paper, we report the continued development and evaluation of several figure summarization systems, the FigSum+ systems, that automatically identify associated texts, remove redundant information, and generate a text summary for every figure in an article. Using a set of 94 annotated figures selected from 19 different journals, we conducted an intrinsic evaluation of FigSum+. We evaluate the performance by precision, recall, F1, and ROUGE scores. The best FigSum+ system is based on an unsupervised method, achieving F1 score of 0.66 and ROUGE-1 score of 0.97. The annotated data is available at figshare.com (http://figshare.com/articles/Figure_Associated_Text_Summarization_and_Evaluation/858903).

  14. "Blessed": Musical Talent, Smartness, & Figured Identities

    Science.gov (United States)

    Hoffman, Adria R.

    2015-01-01

    The purpose of this study is to explore smartness and talent as social constructs. Drawing on Holland et al.'s (1998) figured identities, this article explores the figuring of abilities by elucidating the voices of African American high school chorus students. Critical Race Theory (CRT) helps to unpack normalized language and practices that…

  15. Figure-associated text summarization and evaluation.

    Directory of Open Access Journals (Sweden)

    Balaji Polepalli Ramesh

    Full Text Available Biomedical literature incorporates millions of figures, which are a rich and important knowledge resource for biomedical researchers. Scientists need access to the figures and the knowledge they represent in order to validate research findings and to generate new hypotheses. By themselves, these figures are nearly always incomprehensible to both humans and machines and their associated texts are therefore essential for full comprehension. The associated text of a figure, however, is scattered throughout its full-text article and contains redundant information content. In this paper, we report the continued development and evaluation of several figure summarization systems, the FigSum+ systems, that automatically identify associated texts, remove redundant information, and generate a text summary for every figure in an article. Using a set of 94 annotated figures selected from 19 different journals, we conducted an intrinsic evaluation of FigSum+. We evaluate the performance by precision, recall, F1, and ROUGE scores. The best FigSum+ system is based on an unsupervised method, achieving F1 score of 0.66 and ROUGE-1 score of 0.97. The annotated data is available at figshare.com (http://figshare.com/articles/Figure_Associated_Text_Summarization_and_Evaluation/858903.

  16. Learning time-dependent noise to reduce logical errors: real time error rate estimation in quantum error correction

    Science.gov (United States)

    Huo, Ming-Xia; Li, Ying

    2017-12-01

    Quantum error correction is important to quantum information processing, which allows us to reliably process information encoded in quantum error correction codes. Efficient quantum error correction benefits from the knowledge of error rates. We propose a protocol for monitoring error rates in real time without interrupting the quantum error correction. Any adaptation of the quantum error correction code or its implementation circuit is not required. The protocol can be directly applied to the most advanced quantum error correction techniques, e.g. surface code. A Gaussian processes algorithm is used to estimate and predict error rates based on error correction data in the past. We find that using these estimated error rates, the probability of error correction failures can be significantly reduced by a factor increasing with the code distance.

  17. Medication Errors - A Review

    OpenAIRE

    Vinay BC; Nikhitha MK; Patel Sunil B

    2015-01-01

    In this present review article, regarding medication errors its definition, medication error problem, types of medication errors, common causes of medication errors, monitoring medication errors, consequences of medication errors, prevention of medication error and managing medication errors have been explained neatly and legibly with proper tables which is easy to understand.

  18. Using Figure and Concept Knowledge in Geometry

    Directory of Open Access Journals (Sweden)

    Yavuz Karpuz

    2014-08-01

    Full Text Available In this study, we aim to investigate how students build interaction between concepts and figure in geometry. For this purpose we developed two type data collection tool. First one called shapely is formed eight open ended question which has concepts and figure. Second one called shapeless is formed eight open ended question which has only concepts. To prepare this data collection tools’ difficulty level we took two math teachers’ opinions. Developed data collection tools were applied 120 students at 9th grade and 11th grade in Trabzon Gazi Anatolian High School. First of all we applied shapeless questions. One month later we applied shapely questions. We investigated students’ answer and the data showed that students more succeed in shapely questions than shapeless questions. We concluded that the difficulty of solving shapeless question result from students didn’t manage to draw figure representing concept knowledge or draw wrong figure, figure drawn by students can’t fulfıl generalizability condition and students who have little knowledge of concept in geometry is under the influence of prototype figure.Key Words:    Figural concepts theory, geometrical reasoning, geometry teaching

  19. Creativity and ease of ambiguous figural reversal.

    Science.gov (United States)

    Wiseman, Richard; Watt, Caroline; Gilhooly, Kenneth; Georgiou, George

    2011-08-01

    Two studies examined the relationships between self-rated and objectively measured creative ability and ease of perceiving alternative interpretations of the ambiguous Duck-Rabbit figure. The studies found empirical support for what has previously been a largely analogical connection between figural reversal and creativity, using both self-rated trait creativity and objectively scored creative productivity. We discuss the hypothesis that executive functioning is the likely common cognitive factor linking perception of ambiguous figures and creative ability. ©2011 The British Psychological Society.

  20. Annunciations - Figuring the Feminine in Renaissance Art

    Directory of Open Access Journals (Sweden)

    John M. Carvalho

    2016-01-01

    Full Text Available Viewers of Renaissance representations of the Annunciation miss an important irony. Where Mary is figured as unimpressed by Gabriel's proposal, she is upholding a masculinist ideal of female virtue. Where she is figured as delighted by the news, she represents an alternative feminine ideal that continues to be attractive to women and feminists, today. Inspired by the writings of Luce Irigaray and Julia Kristeva, I figure Mary in Renaissance representations of the Annunciation as contesting an ideal of feminine virtue that would deny her sexual difference and deny her pleasure in fulfilling her role as the bride and mother of God.

  1. Feed-forward segmentation of figure-ground and assignment of border-ownership.

    Directory of Open Access Journals (Sweden)

    Hans Supèr

    Full Text Available Figure-ground is the segmentation of visual information into objects and their surrounding backgrounds. Two main processes herein are boundary assignment and surface segregation, which rely on the integration of global scene information. Recurrent processing either by intrinsic horizontal connections that connect surrounding neurons or by feedback projections from higher visual areas provide such information, and are considered to be the neural substrate for figure-ground segmentation. On the contrary, a role of feedforward projections in figure-ground segmentation is unknown. To have a better understanding of a role of feedforward connections in figure-ground organization, we constructed a feedforward spiking model using a biologically plausible neuron model. By means of surround inhibition our simple 3-layered model performs figure-ground segmentation and one-sided border-ownership coding. We propose that the visual system uses feed forward suppression for figure-ground segmentation and border-ownership assignment.

  2. The Figure 8 Model of International Relations

    National Research Council Canada - National Science Library

    Sibayan, Jerome T

    2008-01-01

    .... The Figure 8 Model is presented first in a Cartesian format and then in geometrical form. This model is an intuitive idea based on a particular reading of history rather than a new international relations theory...

  3. Spheres of Exemption, Figures of Exclusion

    DEFF Research Database (Denmark)

    , the history of ideas, social science, political science and literature studies, Spheres of Exemption, Figures of Exclusion offers thirteen investigations into the co-constitutive relationship between subjectivity and political and legal order, combining theoretical reflection with empirical and historical...

  4. Equation Solution Figures of Merit, Metaheuristic Search, and the Schrodinger Equation

    Science.gov (United States)

    MacNeil, Paul

    2014-03-01

    This presentation deals with: a definition of ``equation error'' a consideration of equation solution figures of merit based on equation error, and on other measures; and the use of metaheuristic techniques in the search for approximate solutions. These considerations are illustrated by application to the Schrodinger equation for a simple system. Models suitable for computation are produced. Computation results are used to compare the consequences of selection of different figures of merit. ``Equation error'' is defined to be the quantity by which an approximate solution fails to satisfy an equation. ``Equation error variance'' is defined to be the squared modulus of the equation error summed/integrated over the domain of interest. (Generalization to sets of equations is straightforward.) In the example, equation error variance is a functional of the Schrodinger wave function. Possible figures of merit include: ground state energy, system geometry, and equation solution variance. The (derivative-free) metaheuristic used to solve the Schrodinger equation has been changed from a genetic algorithm, used in earlier versions of this research, to evolution strategy with covariance matrix adaptation.

  5. Error Budgeting

    Energy Technology Data Exchange (ETDEWEB)

    Vinyard, Natalia Sergeevna [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Perry, Theodore Sonne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Usov, Igor Olegovich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-04

    We calculate opacity from k (hn)=-ln[T(hv)]/pL, where T(hv) is the transmission for photon energy hv, p is sample density, and L is path length through the sample. The density and path length are measured together by Rutherford backscatter. Δk = $\\partial k$\\ $\\partial T$ ΔT + $\\partial k$\\ $\\partial (pL)$. We can re-write this in terms of fractional error as Δk/k = Δ1n(T)/T + Δ(pL)/(pL). Transmission itself is calculated from T=(U-E)/(V-E)=B/B0, where B is transmitted backlighter (BL) signal and B0 is unattenuated backlighter signal. Then ΔT/T=Δln(T)=ΔB/B+ΔB0/B0, and consequently Δk/k = 1/T (ΔB/B + ΔB$_0$/B$_0$ + Δ(pL)/(pL). Transmission is measured in the range of 0.2

  6. Presenting Fake Figures: A Tool to Teach Effective Scientific Figure Design

    Directory of Open Access Journals (Sweden)

    Veronica A. Segarra

    2013-08-01

    Full Text Available As trained scientists, we become adept not only at analyzing and understanding figures in the scientific literature, but also at designing figures to effectively represent our own data and findings. As educators, we strive to pass on these skills to our students, some of whom will ultimately become scientists themselves. Conveying the principles of effective figure design can be challenging, particularly when students have had little exposure to the process of reading scientific literature, much less writing a piece of scientific literature. Improvisational activities in the classroom reinforce teaching goals such as spontaneity, risk-taking, creativity, communication skills, team-building, and critical thinking (2. Indeed, improv training for scientists is becoming more common, helping scientists to communicate more spontaneously about their work and connect with their audience (1. In this article, we present an improvisational game that can aid in the teaching of effective scientific figure design. This “Present-a-Fake-Figure Exercise” is applicable to both the classroom and laboratory settings. In this learning activity, students improvise presenting fake scientific figures to an audience of their peers. These fake figures are prepared beforehand by the instructor and exemplify the do’s and don’ts of scientific figure design. Some of the learning outcomes of the activity include (1 identifying what makes a scientific figure cohesive, easy to analyze, and reader-friendly, and (2 identifying strategies that are useful in the design of a multi-panel figure to convey a scientific story.

  7. Figure reversals and creativity: a research note.

    Science.gov (United States)

    Simpson, M T; Lansky, L M; Senter, R J; Peterson, J M

    1983-10-01

    In a series of studies, Bergum and Bergum (1979a, 1979b) noted a positive relationship between college students' self-perceptions of creativity and their passive rates of ambiguous figure reversal. While these authors suggest that a relationship may also exist between figure-reversal rate and creativity, as assessed by external measures, their research does not support this claim. Indeed, other research has not substantiated a relationship between rate of figure reversal and objective tests of creativity (Bloomberg, 1971; Bergum & Flamm, 1975). It may also be the case that students' perceptions of their own creative ability differ markedly from externally-derived measures of such ability. As part of a larger study relating figure-reversal rate, creativity, and handedness, the present authors attempted to replicate and extend the work of Bergum and Bergum through the use of professors' judgments of students' creativity. The subjects were 48 senior students of architecture (40 males, 8 females). Each student initially read a description of six factors commonly associated with creativity in the psychological literature and then rated himself in creative ability in comparison to his classmates. In accordance with Bergum and Bergum (1979a, 1979b), the students passively viewed (and recorded) figure reversals of six ambiguous figures. The six figures were presented for 60 sec. each, with 10-sec. intervals, in two random orders. Students' creative ability was also determined from rankings by two architecture professors who were familiar with the students' work. To guide their rankings, the professors used the same description of creativity as was given to the students.(ABSTRACT TRUNCATED AT 250 WORDS)

  8. The Possibility of Semantic Features and Analysis of Figures of Speech——Cognitive Figures and Expressive Figures

    Directory of Open Access Journals (Sweden)

    Liu Dawei

    2007-10-01

    Full Text Available In this paper, linguistic methodology is suggested for approaching figures of speech formed due to shift of cognitive relations. First, requisite features, possible features and impossible features are proposed on the basis of semantic analysis and their interrelationships and expressions are discussed. Then it is further argued that all figures formed due to shift of cognitive relation are expressed to accept an impossible feature; and there are four semantic forms to accept it: “zero distance/distanced”, “implicit/explicit”, “direct/indirect”, “positive/negative”. Finally, starting from the two approaches to figures we comment on the traditional idea of separating decoration and substance and the new idea of “function as form”.

  9. Figure and flesh : Francis Bacon's challenge to the figurative tradition in Western art

    OpenAIRE

    Telci, Müge

    2002-01-01

    Ankara : The Department of Graphic Design and the Institute of Fine Arts of Bilkent University, 2002. Thesis (Master's) -- Bilkent University, 2002. Includes bibliographical references leaves 79-81. When figuring the body is at stake within the Western tradition of art, figuration comes up as a question of framing and controlling the mass of body (flesh, bones, body liquids etc…). The apparent obsession of Western art with perfect body figures might be understood as an attem...

  10. Fundamentals of figure control and fracture-'free' finishing for high aspect ratio laser optics

    Energy Technology Data Exchange (ETDEWEB)

    Suratwala, Tayyab [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-10-01

    The high level objectives of the this work were to: 1) scientifically understand critical phenomena affecting the surface figure during full aperture finishing; 2) utilize these fundamentals to more deterministically control the surface figure during finishing; 3) successfully polish under rogue particle-‘free’ environments during polishing by understanding/preventing key sources of rogue particles.

  11. Energy in Sweden. Facts and figures 2005

    International Nuclear Information System (INIS)

    2005-12-01

    Energy in Sweden. Facts and Figures 2005 contains the tabular data for most of the diagrams in the main publication. These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. Facts and Figures is available at www.stem.se in pdf- and excel file formats. With effect from the 2001 edition, statistics are of preliminary character for the two preceding years (2003 and 2004). Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data has been used. Further information about the statistics can be found in Energy in Sweden, chapter 8 Energy Facts

  12. Mirror surface metrology and polishing for AXAF/TMA

    International Nuclear Information System (INIS)

    Slomba, A.; Babish, R.; Glenn, P.

    1985-01-01

    The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

  13. BOOK REVIEW: Relativistic Figures of Equilibrium

    Science.gov (United States)

    Mars, M.

    2009-08-01

    Compact fluid bodies in equilibrium under its own gravitational field are abundant in the Universe and a proper treatment of them can only be carried out using the full theory of General Relativity. The problem is of enormous complexity as it involves two very different regimes, namely the interior and the exterior of the fluid, coupled through the surface of the body. This problem is very challenging both from a purely theoretical point of view, as well as regarding the obtaining of realistic models and the description of their physical properties. It is therefore an excellent piece of news that the book 'Relativistic Figures of Equilibrium' by R Meinel, M Ansorg, A Kleinwächter, G Neugebauer and D Petroff has been recently published. This book approaches the topic in depth and its contents will be of interest to a wide range of scientists working on gravitation, including theoreticians in general relativity, mathematical physicists, astrophysicists and numerical relativists. This is an advanced book that intends to present some of the present-day results on this topic. The most basic results are presented rather succinctly, and without going into the details, of their derivations. Although primarily not intended to serve as a textbook, the presentation is nevertheless self-contained and can therefore be of interest both for experts on the field as well as for anybody wishing to learn more about rotating self-gravitating compact bodies in equilibrium. It should be remarked, however, that this book makes a rather strong selection of topics and concentrates fundamentally on presenting the main results obtained by the authors during their research in this field. The book starts with a chapter where the fundamental aspects of rotating fluids in equilibrium, including its thermodynamic properties, are summarized. Of particular interest are the so-called mass-shedding limit, which is the limit where the body is rotating so fast that it is on the verge of starting

  14. Discharge Onset Voltage Prediction for a Gas-Insulated System Via the Figure-of-Merit Concept

    DEFF Research Database (Denmark)

    Crichton, George C; Vibholm, Svend

    1987-01-01

    The accuracy of discharge onset prediction via thefigur figure-of-merit concept for a strongly electronegative gas is examined. A coaxial system is employed, for which the inner electrode possesses a surface roughness of Ra=35 ¿m. With SF6 as the insulating medium a reference discharge-onset cha......The accuracy of discharge onset prediction via thefigur figure-of-merit concept for a strongly electronegative gas is examined. A coaxial system is employed, for which the inner electrode possesses a surface roughness of Ra=35 ¿m. With SF6 as the insulating medium a reference discharge...

  15. Michelangelo, Leibniz and the Serpentine Figure

    NARCIS (Netherlands)

    S. Tuinen (Sjoerd)

    2011-01-01

    textabstractAbstract In his lectures from 1987, Deleuze draws an analogy between Michelangelo‟s figures and Leibnizian substances by claiming that neither are essences but rather sources of modifications or manners of being. The best way to explore this analogy, I argue, is by focusing on

  16. The Offerings of Fringe Figures and Migrants

    Science.gov (United States)

    Engels-Schwarzpaul, A.-Chr.

    2015-01-01

    "The Western tradition", as passe-partout, includes fringe figures, émigrés and migrants. Rather than looking to resources at the core of the Western tradition to overcome its own blindnesses, I am more interested in its gaps and peripheries, where other thoughts and renegade knowledges take hold. It is in the contact zones with…

  17. Photovoltaic power production figures in 1992

    International Nuclear Information System (INIS)

    1993-01-01

    Worldwide figures of photovoltaic power production (in Mw) along 1992 are presented. Worldwide production of modules per manufacturing technology and per manufacturing companies in Europe, USA and Japan are provided as well. The review has used the following sources: ''PV News'', ''PV insider's report'' and ''systems solars''. (Author)

  18. Participation in the Figured World of Graffiti

    Science.gov (United States)

    Valle, Imuris; Weiss, Eduardo

    2010-01-01

    This article is based on ethnographic work with two "crews" of young graffiti artists in southern Mexico City. The crews share certain characteristics with gangs or urban tribes, but more with "communities of practice": they live in the "figured world" of graffiti, a community of practice at the local and global…

  19. Modeling coherent errors in quantum error correction

    Science.gov (United States)

    Greenbaum, Daniel; Dutton, Zachary

    2018-01-01

    Analysis of quantum error correcting codes is typically done using a stochastic, Pauli channel error model for describing the noise on physical qubits. However, it was recently found that coherent errors (systematic rotations) on physical data qubits result in both physical and logical error rates that differ significantly from those predicted by a Pauli model. Here we examine the accuracy of the Pauli approximation for noise containing coherent errors (characterized by a rotation angle ɛ) under the repetition code. We derive an analytic expression for the logical error channel as a function of arbitrary code distance d and concatenation level n, in the small error limit. We find that coherent physical errors result in logical errors that are partially coherent and therefore non-Pauli. However, the coherent part of the logical error is negligible at fewer than {ε }-({dn-1)} error correction cycles when the decoder is optimized for independent Pauli errors, thus providing a regime of validity for the Pauli approximation. Above this number of correction cycles, the persistent coherent logical error will cause logical failure more quickly than the Pauli model would predict, and this may need to be combated with coherent suppression methods at the physical level or larger codes.

  20. Fixturing error measurement and analysis using CMMs

    International Nuclear Information System (INIS)

    Wang, Y; Chen, X; Gindy, N

    2005-01-01

    Influence of fixture on the errors of a machined surface can be very significant. The machined surface errors generated during machining can be measured by using a coordinate measurement machine (CMM) through the displacements of three coordinate systems on a fixture-workpiece pair in relation to the deviation of the machined surface. The surface errors consist of the component movement, component twist, deviation between actual machined surface and defined tool path. A turbine blade fixture for grinding operation is used for case study

  1. Enhancing the thermoelectric figure of merit in engineered graphene nanoribbons.

    Science.gov (United States)

    Sadeghi, Hatef; Sangtarash, Sara; Lambert, Colin J

    2015-01-01

    We demonstrate that thermoelectric properties of graphene nanoribbons can be dramatically improved by introducing nanopores. In monolayer graphene, this increases the electronic thermoelectric figure of merit ZT e from 0.01 to 0.5. The largest values of ZT e are found when a nanopore is introduced into bilayer graphene, such that the current flows from one layer to the other via the inner surface of the pore, for which values as high as ZT e = 2.45 are obtained. All thermoelectric properties can be further enhanced by tuning the Fermi energy of the leads.

  2. Enhancing the thermoelectric figure of merit in engineered graphene nanoribbons

    Directory of Open Access Journals (Sweden)

    Hatef Sadeghi

    2015-05-01

    Full Text Available We demonstrate that thermoelectric properties of graphene nanoribbons can be dramatically improved by introducing nanopores. In monolayer graphene, this increases the electronic thermoelectric figure of merit ZTe from 0.01 to 0.5. The largest values of ZTe are found when a nanopore is introduced into bilayer graphene, such that the current flows from one layer to the other via the inner surface of the pore, for which values as high as ZTe = 2.45 are obtained. All thermoelectric properties can be further enhanced by tuning the Fermi energy of the leads.

  3. Active Figure Control Effects on Mounting Strategy for X-Ray Optics

    Science.gov (United States)

    Kolodziejczak, Jeffery J.; Atkins, Carolyn; Roche, Jacqueline M.; ODell, Stephen L.; Ramsey, Brian D.; Elsner, Ronald F.; Weisskopf, Martin C.; Gubarev, Mikhail V.

    2014-01-01

    As part of ongoing development efforts at MSFC, we have begun to investigate mounting strategies for highly nested xray optics in both full-shell and segmented configurations. The analytical infrastructure for this effort also lends itself to investigation of active strategies. We expect that a consequence of active figure control on relatively thin substrates is that errors are propagated to the edges, where they might affect the effective precision of the mounting points. Based upon modeling, we describe parametrically, the conditions under which active mounts are preferred over fixed ones, and the effect of active figure corrections on the required number, locations, and kinematic characteristics of mounting points.

  4. Segmental equivalent temperature determined by means of a thermal manikin: A method for correcting errors due to incomplete contact of the body with a surface

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Janieas, N.R.D.J.; Silva, M.C.G.

    2004-01-01

    The segmental equivalent temperature determined by means of a thermal manikin is often correlated with the local thermal sensation of people and is used for indoor environment assessment. It is also used to assess performance of heated/cooled/ventilated car seats, etc. However, the body...... of the thermal manikins used at present is not as flexible as the human body and is divided into body segments with a surface area that differs from that of the human body in contact with a surface. The area of the segment in contact with a surface will depend on the shape and flexibility of the surface....... This will affect the accuracy in determination of the segmental equivalent temperature, and will result in incorrect assessment. This paper presents a method for correction of the segmental equivalent temperature for the above effects. Improvement in determination of the segmental equivalent temperature...

  5. String figures as mathematics? an anthropological approach to string figure-making in oral tradition societies

    CERN Document Server

    Vandendriessche, Eric

    2015-01-01

    This book addresses the mathematical rationality contained in the making of string figures. It does so by using interdisciplinary methods borrowed from anthropology, mathematics, history and philosophy of mathematics. The practice of string figure-making has long been carried out in many societies, and particularly in those of oral tradition. It consists in applying a succession of operations to a string (knotted into a loop), mostly using the fingers and sometimes the feet, the wrists or the mouth. This succession of operations is intended to generate a final figure. The book explores differ

  6. STRESS FRACTURE PREVALENCE IN ELITE FIGURE SKATERS

    Directory of Open Access Journals (Sweden)

    Sanda Dubravcic-Simunjak

    2008-09-01

    Full Text Available Figure skating is a physically demanding sport that requires a unique combination of artistic ability, speed, agility, flexibility and power. During the last decades not only the competitive schedule has become tougher, but after introduction of the new judging system in 2003, also more emphasis is put on difficult technical elements, jumps, steps and spins (ISU Rules, 2006. More studies about possible increasing prevalence of stress fractures in figure skaters and contributing factors are lacking (Dubravcic-Simunjak et al., 2003; Moran, 2000; Pecina et al., 1990. Therefore the aim of this study was to obtain data about the current stress fracture cumulative risk among elite junior and senior figure skaters, as well as possible factors that may contribute to stress fracture incidence. An anonymous questionnaire, divided into 5 sections, inquired about the prevalence of stress fracture were mailed and distributed to all 62 International Skating Union (ISU members by the ISU headquarters in Lausanne, Switzerland. The guidelines of the Helsinki declaration 2004 were followed. From the 644 skaters who received the questionnaire, 412 completed ones were returned from 110 female juniors (78 single skaters, 12 pair skaters and 20 ice dancers and 135 female seniors (97 single skaters, 16 pair skaters and 22 ice dancers and from 79 male juniors (47 single skaters, 12 pair skaters and 20 ice dancers and 88 male seniors (50 single skaters, 16 pair skaters and 22 ice dancers, coming from different ISU members. The response rate was 62% in females and 67% in males. The median age for female skaters was 16 years and for males 18 years (range 12-25 years. All participants started to skate between 3 and 6 years of age and started to compete in national and international competitions when they were between 5 and 7 years old. At the time of this analysis, they had been skating between 9 and 20 years.In females 41 (16.7%, and in males 25 (13.8% figure skaters

  7. Figuration of tourist personality and tourist travels

    Directory of Open Access Journals (Sweden)

    Đorđević Saša

    2013-01-01

    Full Text Available Quality of tourist travel is a relative category, because its success depends on the subjective perception of the personality of tourists on a tourist trip. For this reason, any tourist trip can be treated from the perspective of different types of figurative forms of tourists' personality, which also determine different quality of tourist travel, which, in turn, makes them different. Thus, any tourist trip, unto itself, has its own uniqueness, taking on the forms and content created, for the most part, by the tourists themselves, along with all other tourism stakeholders involved in this process. These forms and contents are primarily conditioned by the spiritual profile of tourists' personality and their psychological and motivational preferences, which is symbolically represented in the figurative context of a chess game. In addition to this, identification of essential characteristics of different spiritual profiles of tourist's personality, must be a starting point for the programming of overall content and especially of animation and cultural content.

  8. Ambiguous Authorities: Vertigo and the Auteur Figure

    Directory of Open Access Journals (Sweden)

    Isabelle Licari-Guillaume

    2017-12-01

    Full Text Available This article examines authorial performance in the context of DC’s Vertigo line. In the 1990s, Vertigo gained its reputation as an innovative and progressive imprint by promoting the work of British scriptwriters, who were hailed as true author figures, despite the inherently collaborative nature of the mainstream comics industry. In a manner reminiscent of “auteur theory”, writers such as Neil Gaiman, Warren Ellis or Grant Morrison developed attractive author personas which they consistently displayed through interviews, letter columns or social media, but also, more importantly, by inserting their avatars within the comics they scripted. Upon closer examination, however, it becomes clear that their work in fact simultaneously asserts and destabilizes writerly authority, in a manner that is consistent with Linda Hutcheon’s view of postmodernity. By multiplying author figures and playfully disseminating authority, Vertigo authors question their own authorial control over the text, asserting instead the crucial role played by the reader.

  9. Energy in Sweden. Facts and figures 2004

    International Nuclear Information System (INIS)

    2004-12-01

    Energy in Sweden 2004: Facts and Figures contains the tabular data for most of the diagrams in the main publication. These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. Facts and Figures is available at www.stem.se in pdf- and excel file formats. Since the year 2001 statistics for the period 1983-1998 are revised compared to data for previous editions. With effect from the 2001 edition, statistics are of preliminary character for the two preceding years. Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data has been used. Further information about the statistics can be found in Energy in Sweden, chapter 8 Energy Facts.

  10. Figurative Language on Maya Angelou selected Poetries

    OpenAIRE

    Risma Hayani

    2016-01-01

    This study aimed to find out the kinds of figurative language in the five selected poetries of Maya Angelou, the titles are: Alone, Caged Bird, Old Folks Laugh, Phenomenal Woman, Still I Rise. The focus of this study is figurative language which involves: Metaphor, Personification, Hyperbole, Simile, Metonymy, Synecdoche, Irony, Antithesis, Symbolism, and Paradox. Qualitative approach with design of content analysis was used in this study. The researcher acted as the main instrument since she...

  11. Omnichannel Marketing. Facts & Figures. Denmark 2017

    DEFF Research Database (Denmark)

    Futtrup Kjær, Jan; Kjær Jacobsen, Christine; Bjerre Herdel, Stine

    This NBI Omnichannel Facts and Figures report highlights the central findings from the NBI Omnichannel capability benchmarking tool, based on data collected in 2015 and 2016. The insights shared here provide an understanding of the way companies and marketing departments are working to deliver on...... on - and adapt to - the challenges and opportunities related to the customer-centric, omnichannel experience. View this report as a data-freeze and analysis on the status of omnichannel in Denmark as of 2017....

  12. Vacuum-Flex Figuring of Primary Telescope Mirrors

    Science.gov (United States)

    Albin, E. F. M.

    2004-12-01

    In the current investigation, details on the construction and performance of a vacuum-flexed (i.e., figured) 51 cm (20-inch) mirror, with a fast f/4 focal ratio, are presented. A vacuum has the chief advantage of being able to pull with a uniform or isotropic stress across a large surface area, which will naturally form a parabolic surface. The essence of the idea is to grind and polish a spherical mirror and then warp or flex it into a near perfect paraboloid, thus avoiding tedious figuring altogether. To date, telescope makers around the globe have experimented with small flexed mirrors with considerable success. In these instances, mirrors have been flexed by exerting tension on a bolt or sponge-pad adhered to the back of the mirror. The prototype mirror consists of two 51 cm disks of plate glass -- each slumped to an f/4 focal ratio. The front-plate (19 mm in thickness) is separated from the back-plate (13 mm in thickness) back a flexible 9.5 mm air filled gasket. Although the rubber gasket makes a fairly good vacuum seal, silicon cement was placed about the outer edge in order to produce a perfectly tight seal. A vacuum of 8 kPa on the back of the mirror resulted in approximately 164 kilograms of negative pressure, which is required to flex the mirror into the required paraboloid. Ronchi test show a nice smooth paraboloid free from astigmatism while foucault zonal measurements display a figure better than 1/20 wave. Preliminary star testing show promising results as well. Vacuum-flexed mirrors may have benefits for both amateur and professional telescope makers alike. A US patent is pending on the aforementioned design.

  13. Energy: facts and figures in 2006

    International Nuclear Information System (INIS)

    Lavergne, R.; Nanot, B.; Scherrer, S.; Paquel, V.; Louati, S.; Thienard, H.

    2007-01-01

    The consumption of final energy in France in 2006 increased slightly on the whole (+0.6%) and in all sectors except the industry (-0.7%). The final energy consumption is defined as the difference between the total consumption of primary energy and the consumption of the energy production sector. The evolution of the consumption of final energy is different according to the type of energy: +4.1% for coal (due to the strong demand in the iron and steel industry), +3.6% for renewable energies (due to specific development programs), +1.5% for electrical power and no change for oil and natural gas. Despite high prices, sales of car fuels rose by 0.4%, this figure hides the fact that the sales of fuels for diesel cars rose by 2.7% (because of the growing population of diesel cars) while those of grade petrol kept on plummeting (-5.9%). It is important to note that the releases of CO 2 due to energy went down by -1.4% in 2006. The energy bill increased by +18.5% to fetch 46.2*10 9 euros despite the decrease of the imported volumes. This articles details the energy figures for France in 2006 and sheds light particularly on 3 aspects: first, the annual trends in energy since 1973, secondly, the energy bill and thirdly the figures for electricity, natural gas, solid mineral fuels, hydrocarbons and renewable sources of energy. (A.C.)

  14. 78 FR 25577 - Safety Zone, Figure Eight Causeway Channel; Figure Eight Island, NC

    Science.gov (United States)

    2013-05-02

    ... a private wedding. This action is necessary to protect the life and property of the maritime public... support of a private wedding over the waters of the Figure Eight Causeway Channel. The fireworks will be...

  15. Dissociation of color and figure-ground effects in the watercolor illusion.

    Science.gov (United States)

    Von der Heydt, Rüdiger; Pierson, Rachel

    2006-01-01

    Two phenomena can be observed in the watercolor illusion: illusory color spreading and figure-ground organization. We performed experiments to determine whether the figure-ground effect is a consequence of the color illusion or due to an independent mechanism. Subjects were tested with displays consisting of six adjacent compartments--three that generated the illusion alternating with three that served for comparison. In a first set of experiments, the illusory color was measured by finding the matching physical color in the alternate compartments. Figureness (probability of 'figure' responses, 2AFC) of the watercolor compartments was then determined with and without the matching color in the alternate compartments. The color match reduced figureness, but did not abolish it. There was a range of colors in which the watercolor compartments dominated as figures over the alternate compartments although the latter appeared more saturated in color. In another experiment, the effect of tinting alternate compartments was measured in displays without watercolor illusion. Figureness increased with color contrast, but its value at the equivalent contrast fell short of the figureness value obtained for the watercolor pattern. Thus, in both experiments, figureness produced by the watercolor pattern was stronger than expected from the color effect, suggesting independent mechanisms. Considering the neurophysiology, we propose that the color illusion follows from the principles of representation of surface color in the visual cortex, while the figure-ground effect results from two mechanisms of border ownership assignment, one that is sensitive to asymmetric shape of edge profile, the other to consistency of color borders.

  16. Learning from prescribing errors

    OpenAIRE

    Dean, B

    2002-01-01

    

 The importance of learning from medical error has recently received increasing emphasis. This paper focuses on prescribing errors and argues that, while learning from prescribing errors is a laudable goal, there are currently barriers that can prevent this occurring. Learning from errors can take place on an individual level, at a team level, and across an organisation. Barriers to learning from prescribing errors include the non-discovery of many prescribing errors, lack of feedback to th...

  17. The Emergence of Figural Effects in the Watercolor Illusion

    Science.gov (United States)

    Pinna, Baingio; Penna, Maria Pietronilla

    The watercolor illusion is characterized by a large-scale assimilative color spreading (coloration effect) emanating from thin colored edges. The watercolor illusion enhances the figural properties of the colored areas and imparts to the surrounding area the perceptual status of background. This work explores interactions between cortical boundary and surface processes by presenting displays and psychophysical experiments that exhibit new properties of the watercolor illusion. The watercolor illusion is investigated as supporting a new principle of figure-ground organization when pitted against principles of surroundedness, relative orientation, and Prägnanz. The work demonstrated that the watercolor illusion probes a unique combination of visual processes that set it apart from earlier Gestalt principles, and can compete successfully against them. This illusion exemplifies how long-range perceptual effects may be triggered by spatially sparse information. All the main effects are explained by the FACADE model of biological vision, which clarifies how local properties control depthful filling-in of surface lightness and color.

  18. Figurative Language on Maya Angelou selected Poetries

    Directory of Open Access Journals (Sweden)

    Risma Hayani

    2016-12-01

    Full Text Available This study aimed to find out the kinds of figurative language in the five selected poetries of Maya Angelou, the titles are: Alone, Caged Bird, Old Folks Laugh, Phenomenal Woman, Still I Rise. The focus of this study is figurative language which involves: Metaphor, Personification, Hyperbole, Simile, Metonymy, Synecdoche, Irony, Antithesis, Symbolism, and Paradox. Qualitative approach with design of content analysis was used in this study. The researcher acted as the main instrument since she was the one who analyzed the figurative language. Moreover checklist was also used to support her data collection. The data was analyzed through three stages; 1. Data reduction, 2. Data representation, 3. Conclusion. The result of her study showed there were 40 sentences that containing figurative language in five selected poetries of Maya Angelou. They were; Metaphor (13 sentences, Personification (9 sentences, Hyperbole (1 sentence, Simile (8 sentences, Synecdoche (1 sentence, Antithesis (1 sentence, Symbolism (5 sentences, and Paradox (2 sentences. The researcher conclude, if the figurative language used by Angelou to compare, or even symbolize the sentences to bring the meaning come up with beautiful language. Mostly of her poetries told about her experience in the past that rooted to history of the discrimination of American-African.

  19. Figures and First Years: An Analysis of Calculus Students' Use of Figures in Technical Reports

    Directory of Open Access Journals (Sweden)

    Nathan J. Antonacci

    2017-07-01

    Full Text Available This three-year study focused on first-year Calculus I students and their abilities to incorporate figures in technical reports. In each year, these calculus students wrote a technical report as part of the Polar Bear Module, an educational unit developed for use in partner courses in biology, computer science, mathematics, and physics as part of the Multidisciplinary Sustainability Education (MSE project at Ithaca College. In the first year of the project, students received basic technical report guidelines. In year two, the report guidelines changed to include explicit language on how to incorporate figures. In year three, a grading rubric was added to the materials provided to one of the two classes. In all three years, the students performed below expectations in their use of graphs in their reports. Reviews of the figures in the 78 technical reports written by the 106 students showed repeated deficiencies in the figures and how the students used them in the discussion sections and in evidence-based arguments. In year three the student’s quantitative literacy (QL skills were assessed using an extract from a QL assessment instrument published in Numeracy. The results indicated that the students could both read and interpret figures, suggesting that issues with QL were not the main contributor to student difficulty with written discussion about graphs. The study underscores the need that explicit instructional attention be given to developing student knowhow in the use of figures in technical reports.

  20. Refractive optics to compensate x-ray mirror shape-errors

    Science.gov (United States)

    Laundy, David; Sawhney, Kawal; Dhamgaye, Vishal; Pape, Ian

    2017-08-01

    Elliptically profiled mirrors operating at glancing angle are frequently used at X-ray synchrotron sources to focus X-rays into sub-micrometer sized spots. Mirror figure error, defined as the height difference function between the actual mirror surface and the ideal elliptical profile, causes a perturbation of the X-ray wavefront for X- rays reflecting from the mirror. This perturbation, when propagated to the focal plane results in an increase in the size of the focused beam. At Diamond Light Source we are developing refractive optics that can be used to locally cancel out the wavefront distortion caused by figure error from nano-focusing elliptical mirrors. These optics could be used to correct existing optical components on synchrotron radiation beamlines in order to give focused X-ray beam sizes approaching the theoretical diffraction limit. We present our latest results showing measurement of the X-ray wavefront error after reflection from X-ray mirrors and the translation of the measured wavefront into a design for refractive optical elements for correction of the X-ray wavefront. We show measurement of the focused beam with and without the corrective optics inserted showing reduction in the size of the focus resulting from the correction to the wavefront.

  1. RAP Figuring slumped mirrors to remove mid-spatial frequency errors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Future X-ray telescopes require significant amounts of optical area. To accommodate this in a grazing incidence design, extremely thin mirrors are formed in...

  2. Shape space figure-8 solution of three body problem with two equal masses

    Science.gov (United States)

    Yu, Guowei

    2017-06-01

    In a preprint by Montgomery (https://people.ucsc.edu/~rmont/Nbdy.html), the author attempted to prove the existence of a shape space figure-8 solution of the Newtonian three body problem with two equal masses (it looks like a figure 8 in the shape space, which is different from the famous figure-8 solution with three equal masses (Chenciner and Montgomery 2000 Ann. Math. 152 881-901)). Unfortunately there is an error in the proof and the problem is still open. Consider the α-homogeneous Newton-type potential, 1/rα, using action minimization method, we prove the existence of this solution, for α \\in (1, 2) ; for α=1 (the Newtonian potential), an extra condition is required, which unfortunately seems hard to verify at this moment.

  3. Mitigation of defocusing by statics and near-surface velocity errors by interferometric least-squares migration with a reference datum

    KAUST Repository

    Sinha, Mrinal

    2016-05-23

    Imaging seismic data with an erroneous migration velocity can lead to defocused migration images. To mitigate this problem, we first choose a reference reflector whose topography is well-known from the well logs, for example. Reflections from this reference layer are correlated with the traces associated with reflections from deeper interfaces to get crosscorrelograms. Interferometric least-squares migration (ILSM) is then used to get the migration image that maximizes the crosscorrelation between the observed and the predicted crosscorrelograms. Deeper reference reflectors are used to image deeper parts of the subsurface with a greater accuracy. Results on synthetic and field data show that defocusing caused by velocity errors is largely suppressed by ILSM. We have also determined that ILSM can be used for 4D surveys in which environmental conditions and acquisition parameters are significantly different from one survey to the next. The limitations of ILSM are that it requires prior knowledge of a reference reflector in the subsurface and the velocity model below the reference reflector should be accurate.

  4. Human error in maintenance: An investigative study for the factories of the future

    International Nuclear Information System (INIS)

    Dhillon, B S

    2014-01-01

    This paper presents a study of human error in maintenance. Many different aspects of human error in maintenance considered useful for the factories of the future are studied, including facts, figures, and examples; occurrence of maintenance error in equipment life cycle, elements of a maintenance person's time, maintenance environment and the causes for the occurrence of maintenance error, types and typical maintenance errors, common maintainability design errors and useful design guidelines to reduce equipment maintenance errors, maintenance work instructions, and maintenance error analysis methods

  5. Response of the mobile VLBI design to error sources. [with regards to Crustal Dynamics Project

    Science.gov (United States)

    Trask, D. W.; Brunn, M. L.; Davidson, J. M.; Fanselow, J. L.; Niell, A. E.; Resch, G. M.; Wallace, K. S.

    1983-01-01

    The response of Mobile VLBI design to error sources is addressed. The sensitivity of the hydrogen maser to variations in ambient temperature is discussed, with an example of drifts in the frequency system causing excursions in the time-delay observable exceeding + or - 200 cm. It is shown that baselines determined only from S-band data can contain errors in excess of 30 cm during periods of high ionospheric activity. The effect of the troposphere on baseline solutions is examined by comparing calibrations from the Water Vapor Radiometer (WVR) to those from a surface model. The apparent ability of the WVR to track relatively short-period fluctuations in water vapor is noted. Finally, consideration is given to the effects of source structure and the technique of monitoring closure of the time-delay observable around a closed figure of baselines.

  6. Children's Drawing of Human Figure Analisis

    Directory of Open Access Journals (Sweden)

    Salko Pezo

    2011-08-01

    Full Text Available Beside speech, that helps children to express their feelings and experiences, establish relations with people, the drawing is one of the most truthful ways of its expression. In this paper the results of pleasant and unpleasant emo­tions among children through drawing of human figure are presented. The survey is conducted on 634 children, and the results indicate that there is difference in expressing negative emotions between boys and girls, while at expressing pleasant emotions the results are similar.

  7. Theories of figures of celestial bodies

    CERN Document Server

    Jardetzky, Wenceslas S

    2005-01-01

    Everything in the universe rotates: the meteors, the asteroids, the planets and their satellites, the sun, the stars, the clusters and nebulae, even the galaxies themselves. The problem of the shape of a rotating body is therefore universal in astronomy. Its treatment in this book, which deals with the figures of equilibrium and distortions of rotating bodies, is full and rigorous.Suitable for upper-level undergraduates and graduate students, this text was written by a renowned researcher and educator who taught at Columbia University and served for many years as a research associate at the La

  8. Distinguished figures in mechanism and machine science

    CERN Document Server

    2014-01-01

    This book is composed of chapters that focus specifically on technological developments by distinguished figures in the history of MMS (Mechanism and Machine Science).  Biographies of well-known scientists are also included to describe their efforts and experiences, and surveys of their work and achievements, and a modern interpretation of their legacy are presented. After the first two volumes, the papers in this third volume again cover a wide range within the field of the History of Mechanical Engineering with specific focus on MMS and will be of interest and motivation to the work (historical or not) of many.

  9. Two-dimensional errors

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This chapter addresses the extension of previous work in one-dimensional (linear) error theory to two-dimensional error analysis. The topics of the chapter include the definition of two-dimensional error, the probability ellipse, the probability circle, elliptical (circular) error evaluation, the application to position accuracy, and the use of control systems (points) in measurements

  10. Part two: Error propagation

    International Nuclear Information System (INIS)

    Picard, R.R.

    1989-01-01

    Topics covered in this chapter include a discussion of exact results as related to nuclear materials management and accounting in nuclear facilities; propagation of error for a single measured value; propagation of error for several measured values; error propagation for materials balances; and an application of error propagation to an example of uranium hexafluoride conversion process

  11. Learning from Errors

    OpenAIRE

    Martínez-Legaz, Juan Enrique; Soubeyran, Antoine

    2003-01-01

    We present a model of learning in which agents learn from errors. If an action turns out to be an error, the agent rejects not only that action but also neighboring actions. We find that, keeping memory of his errors, under mild assumptions an acceptable solution is asymptotically reached. Moreover, one can take advantage of big errors for a faster learning.

  12. WAIS-IV administration errors: effects of altered response requirements on Symbol Search and violation of standard surface-variety patterns on Block Design.

    Science.gov (United States)

    Ryan, Joseph J; Swopes-Willhite, Nicole; Franklin, Cassi; Kreiner, David S

    2015-01-01

    This study utilized a sample of 50 college students to assess the possibility that responding to the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) Symbol Search subtest items with an "x" instead of a "single slash mark" would affect performance. A second sample of 50 college students was used to assess the impact on WAIS-IV Block Design performance of presenting all the items with only red surfaces facing up. The modified Symbol Search and Block Design administrations yielded mean scaled scores and raw scores that did not differ significantly from mean scores obtained with standard administrations. Findings should not be generalized beyond healthy, well-educated young adults.

  13. Medication errors: prescribing faults and prescription errors.

    Science.gov (United States)

    Velo, Giampaolo P; Minuz, Pietro

    2009-06-01

    1. Medication errors are common in general practice and in hospitals. Both errors in the act of writing (prescription errors) and prescribing faults due to erroneous medical decisions can result in harm to patients. 2. Any step in the prescribing process can generate errors. Slips, lapses, or mistakes are sources of errors, as in unintended omissions in the transcription of drugs. Faults in dose selection, omitted transcription, and poor handwriting are common. 3. Inadequate knowledge or competence and incomplete information about clinical characteristics and previous treatment of individual patients can result in prescribing faults, including the use of potentially inappropriate medications. 4. An unsafe working environment, complex or undefined procedures, and inadequate communication among health-care personnel, particularly between doctors and nurses, have been identified as important underlying factors that contribute to prescription errors and prescribing faults. 5. Active interventions aimed at reducing prescription errors and prescribing faults are strongly recommended. These should be focused on the education and training of prescribers and the use of on-line aids. The complexity of the prescribing procedure should be reduced by introducing automated systems or uniform prescribing charts, in order to avoid transcription and omission errors. Feedback control systems and immediate review of prescriptions, which can be performed with the assistance of a hospital pharmacist, are also helpful. Audits should be performed periodically.

  14. SU-G-JeP3-02: Comparison of Magnitude and Frequency of Patient Positioning Errors in Breast Irradiation Using AlignRT 3D Optical Surface Imaging and Skin Mark Techniques

    International Nuclear Information System (INIS)

    Yao, R; Chisela, W; Dorbu, G

    2016-01-01

    Purpose: To evaluate clinical usefulness of AlignRT (Vision RT Ltd., London, UK) in reducing patient positioning errors in breast irradiation. Methods: 60 patients undergoing whole breast irradiation were selected for this study. Patients were treated to the left or right breast lying on Qfix Access breast board (Qfix, Avondale, PA) in supine position for 28 fractions using tangential fields. 30 patients were aligned using AlignRT by aligning a breast surface region of interest (ROI) to the same area from a reference surface image extracted from planning CT. When the patient’s surface image deviated from the reference by more than 3mm on one or more translational and rotational directions, a new reference was acquired using AlignRT in-room cameras. The other 30 patients were aligned to the skin marks with room lasers. On-Board MV portal images of medial field were taken daily and matched to the DRRs. The magnitude and frequency of positioning errors were determined from measured translational shifts. Kolmogorov-Smirnov test was used to evaluate statistical differences of positional accuracy and precision between AlignRT and non-AlignRT patients. Results: The percentage of port images with no shift required was 46.5% and 27.0% in vertical, 49.8% and 25.8% in longitudinal, 47.6% and 28.5% in lateral for AlignRT and non-AlignRT patients, respectively. The percentage of port images requiring more than 3mm shifts was 18.1% and 35.1% in vertical, 28.6% and 50.8% in longitudinal, 11.3% and 24.2% in lateral for AlignRT and non-AlignRT patients, respectively. Kolmogorov-Smirnov test showed that there were significant differences between the frequency distributions of AlignRT and non-AlignRT in vertical, longitudinal, and lateral shifts. Conclusion: As confirmed by port images, AlignRT-assisted patient positioning can significantly reduce the frequency and magnitude of patient setup errors in breast irradiation compared to the use of lasers and skin marks.

  15. Learning from Errors.

    Science.gov (United States)

    Metcalfe, Janet

    2017-01-03

    Although error avoidance during learning appears to be the rule in American classrooms, laboratory studies suggest that it may be a counterproductive strategy, at least for neurologically typical students. Experimental investigations indicate that errorful learning followed by corrective feedback is beneficial to learning. Interestingly, the beneficial effects are particularly salient when individuals strongly believe that their error is correct: Errors committed with high confidence are corrected more readily than low-confidence errors. Corrective feedback, including analysis of the reasoning leading up to the mistake, is crucial. Aside from the direct benefit to learners, teachers gain valuable information from errors, and error tolerance encourages students' active, exploratory, generative engagement. If the goal is optimal performance in high-stakes situations, it may be worthwhile to allow and even encourage students to commit and correct errors while they are in low-stakes learning situations rather than to assiduously avoid errors at all costs.

  16. Spirallike structure in the conoscopic figures of optically active crystals

    Science.gov (United States)

    Pikul', O. Yu.; Rudoi, K. A.; Livashvili, A. I.; Doronin, V. I.; Stroganov, V. I.

    2005-02-01

    This paper discusses a spirallike structure in the conoscopic figures of optically active crystals, differing from the Airy figure. The cause of the appearance of the spirallike structure is circularly polarized radiation.

  17. Karna Particle Size Dataset for Tables and Figures

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset contains 1) table of bulk Pb-XAS LCF results, 2) table of bulk As-XAS LCF results, 3) figure data of particle size distribution, and 4) figure data for...

  18. Advancing Sustainable Materials Management: Facts and Figures Report

    Science.gov (United States)

    Each year EPA releases the Advancing Sustainable Materials Management: Facts and Figures report, formerly called Municipal Solid Waste in the United States: Facts and Figures. It includes information on Municipal Solid Waste generation, recycling, an

  19. Who's bigger? where historical figures really rank

    CERN Document Server

    Skiena, Steven

    2014-01-01

    Is Hitler bigger than Napoleon? Washington bigger than Lincoln? Picasso bigger than Einstein? Quantitative analysts are rapidly finding homes in social and cultural domains, from finance to politics. What about history? In this fascinating book, Steve Skiena and Charles Ward bring quantitative analysis to bear on ranking and comparing historical reputations. They evaluate each person by aggregating the traces of millions of opinions, just as Google ranks webpages. The book includes a technical discussion for readers interested in the details of the methods, but no mathematical or computational background is necessary to understand the rankings or conclusions. Along the way, the authors present the rankings of more than one thousand of history's most significant people in science, politics, entertainment, and all areas of human endeavor. Anyone interested in history or biography can see where their favorite figures place in the grand scheme of things.

  20. La figure socratique : du miasme au paradigme

    Directory of Open Access Journals (Sweden)

    Marie-Hélène Gauthier-Muzellec

    2005-04-01

    Full Text Available L'identification de Socrate à un "miasme" dans l'Eutyphron est liée à la transformation et à l'intériorisation d'une ancienne norme juridique. La procédure de "purification" invoquée, qui doit débarrasser la cité d'une souillure provoquée par les atteintes à la religion civique, est primitivement magico-médicale. Elle traduit immédiatement dans les registres du corps le principe de la faute. C'est un travail d'intériorisation de cette figure qui engendre le soi, et Socrate est une étape histo...

  1. FIGUR WANITA SEBAGAI PENARIK PANDANG DALAM IKLAN

    Directory of Open Access Journals (Sweden)

    Andrian D. Hagijanto

    2000-01-01

    Full Text Available In order to gain brand awareness effectively%2C advertiser use unusual and sometimes inappropriate form of creatifity to make their ads more memorable such method includes the use of women s sexual attractions which%2C on the other hand%2C causes in fraction of ethical norms. Will this be called a deviations in ads or a compromise approach to the audience taste? Abstract in Bahasa Indonesia : Untuk mencapai brand awareness yang lebih tinggi%2C pengiklan harus membuat iklannya menarik%2C lewat kreativitas yang tinggi. Ketika kreativitas itu menggunakan pendekatan yang terjebak oleh pelanggaran norma-norma etis kemasyarakatan -lewat eksploatasi figur wanita dan daya tarik yang melingkupinya-. Akankah kreativitas itu disebut sebagai penyimpangan dalam iklan? Ataukah sah-sah saja sebagai suatu bentuk pendekatan yang menuruti selera pasar. advertisement%2C women s sexual attractions%2C body language

  2. Key figures for energy - 2014 issue

    International Nuclear Information System (INIS)

    2015-02-01

    This publication presents and discusses data and figures, under the form of graphs and tables, on the place of energy in the French economy, on all energies together (opinion on nuclear energy, average prices, energy bill, distribution of primary energy consumption among the different energy sources, global assessment in terms of sources and production, production and consumption of primary energy, final consumption per sector), on the different energy sources (final consumption per sector, primary production, imports and exports, distribution networks and grids, trade for the different sources: coal, oil, gas, electricity, renewable energies) and on other aspects related to energy: heat networks, rational use of energy, CO 2 emissions, energy price, international situation (production, primary and final energy consumption, indicators of energy intensity). An appendix proposes data of energy assessment for France for 2013

  3. Key figures on renewable energies - Release 2013

    International Nuclear Information System (INIS)

    Louati, Sami; Reynaud, Didier; Thienard, Helene

    2013-06-01

    This publication presents and briefly discusses figures (tables and graphs giving data and their evolution over the past years until 2011) for France and its overseas territories about the energy mix, the shares of the different renewable energies (wood, wind, heat pumps, biofuels, hydraulic, solar and others), the production of renewable electricity, the primary consumption of thermal renewable energies per sector (household and office building, industry, agriculture, transport) and per energy sector. A second part addresses the different renewable energies (hydraulic, wind, photovoltaic and thermal solar, heat pumps, wood, biogas, biofuels), indicates installed powers per district or region, their production level and the corresponding evolutions over the past years. A third part addresses the objectives for 2020, compares them with the current situation and outlines the possible biases in 2011 in terms of production and consumption. A fourth part presents graphs comparing data between countries in Europe and in the world in terms of production and consumption (share of renewable energies, electricity production)

  4. Digital finger: beyond phenomenological figures of touch

    Directory of Open Access Journals (Sweden)

    Mika Elo

    2012-02-01

    Full Text Available Mika Elo is a postdoctoral researcher and lecturer in visual culture at Aalto University School of Arts, Design and Architecture (Aalto-ARTS, Helsinki. His research interests include theory of photographic media, philosophical media theory, and artistic research. He is participating in discussions in these areas in the capacity of curator, visual artist and researcher. He has published articles in Finnish, German, and English among others on Benjamin, Nancy, artistic research and photography theory. His doctoral thesis Valokuvan medium [The Medium of Photography] was published in Finnish in 2005 (Tutkijaliitto, Helsinki. In 2009–2011 he worked in the Figures of Touch research project (figuresoftouch.com, and since 2011 he is the director of Media Aesthetics research group at Aalto-ARTS, Department of Media.Author Biography The article reflects on digitality and interface design in terms of the multiple senses of touch. Touching is presented as a “pathic” sense of being exposed, which implies that touching exceeds the tactile and even the phenomenal world. A particular focus is set on Aristotle's and Husserl's ways of thematizing the sense of touch. In this way, two extremes of the phenomenological thinking of touching are articulated: touching as an indistinct and heterogeneous constituent of sensitivity and touching as the guarantor of immediacy of the sense experience. Referring to Derrida's critical notes concerning haptocentrism, the article attempts to problematize the hand and the finger as phenomenological figures of touch and as holds of haptic realism. The article concludes that insofar as digital interface design aims at haptic realism it conceives of the sense of touch in terms of narcissistic feedback and thus tends to conceal the pathic moment of touching.

  5. Figure 1. T. tor species. Figure 2. Long PCR products of ...

    Indian Academy of Sciences (India)

    Annam

    Figure 2. Long PCR products of mitochondrial DNA from the fish T. tor. Lane 1, amplified product using L-12321-Leu and S-LA-16S-H primers. Lane 2, amplified product using H-12321 –Leu and S-LA-16S-L primers. Lane M, 1-Kb DNA ladder. 8 kb ...

  6. On the global and regional properties of the Mars gravitational figure

    International Nuclear Information System (INIS)

    Meshcheryakov, G.A.; Tserklevich, A.L.

    1978-01-01

    The investigations of the Mars gravitational figure (areoid) on the base of gravitational field models, suggested by Jordan, Born, Rizenberg and Sjegren have been carried out. Level surfaces are determined by the iteration method, suggested by G.A. Mescheryakov. The maps of the Mars areoid surface are built up. Regional peculiarities of the Mars gravitational figure are shortly considered. A close connection of the areoid surface and topographical surface of the planet is shown. Correlation coefficient between radii-vectors of the areoid and the topographical surface equals 0.96. Latitudinal correlation functions of areoid and relief of the Mars coincide; longitudinal ones little differ from them and only with longitude more than 70 deg they begin to diverge

  7. Field error lottery

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, C.J.; McVey, B. (Los Alamos National Lab., NM (USA)); Quimby, D.C. (Spectra Technology, Inc., Bellevue, WA (USA))

    1990-01-01

    The level of field errors in an FEL is an important determinant of its performance. We have computed 3D performance of a large laser subsystem subjected to field errors of various types. These calculations have been guided by simple models such as SWOOP. The technique of choice is utilization of the FELEX free electron laser code that now possesses extensive engineering capabilities. Modeling includes the ability to establish tolerances of various types: fast and slow scale field bowing, field error level, beam position monitor error level, gap errors, defocusing errors, energy slew, displacement and pointing errors. Many effects of these errors on relative gain and relative power extraction are displayed and are the essential elements of determining an error budget. The random errors also depend on the particular random number seed used in the calculation. The simultaneous display of the performance versus error level of cases with multiple seeds illustrates the variations attributable to stochasticity of this model. All these errors are evaluated numerically for comprehensive engineering of the system. In particular, gap errors are found to place requirements beyond mechanical tolerances of {plus minus}25{mu}m, and amelioration of these may occur by a procedure utilizing direct measurement of the magnetic fields at assembly time. 4 refs., 12 figs.

  8. GRAMMATICAL ERRORS FOUND IN ARTICLES’ ABSTRACTS OF INDONESIAN SCHOLARLY JOURNALS

    Directory of Open Access Journals (Sweden)

    Indra Wulandari

    2014-11-01

    Full Text Available This study is aimed to know the grammatical errors found in the articles’ abstracts of scholarly journals published by one of Indonesian Islamic State Colleges in 2008-2010. The theory used to analyze the data in this case study is Burt and Kiparsky’s theory, namely Surface Strategy Taxonomy. This theory devides errors into errors of omission, errors of addition, errors of misformation and errors of misordering. This results of the study show that there are 172 items of grammatical errors. The most frequent type of grammatical error is omission with the total number is 72 items or 41.9%. The second is errors of misformation which consist of 57 items or 33.1%. The next is errors of addition (27 items or 15.7% and finally is errors of misordering as the least number of errors with 16 items or 9.3%

  9. Figures of Association and Sound in some Nigerian Proverbs ...

    African Journals Online (AJOL)

    Nekky Umera

    In this paper, our aim is to examine some figures of speech in Ondo proverbs. However, the main thrust of this paper is on figures of association and figures of sound. A follow up paper will examine the other poetic devices that have not been discussed here. Before we go into the analysis of this first part, we shall give a brief ...

  10. Synthetic aperture interferometry: error analysis

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Amiya; Coupland, Jeremy

    2010-07-10

    Synthetic aperture interferometry (SAI) is a novel way of testing aspherics and has a potential for in-process measurement of aspherics [Appl. Opt.42, 701 (2003)].APOPAI0003-693510.1364/AO.42.000701 A method to measure steep aspherics using the SAI technique has been previously reported [Appl. Opt.47, 1705 (2008)].APOPAI0003-693510.1364/AO.47.001705 Here we investigate the computation of surface form using the SAI technique in different configurations and discuss the computational errors. A two-pass measurement strategy is proposed to reduce the computational errors, and a detailed investigation is carried out to determine the effect of alignment errors on the measurement process.

  11. Synthetic aperture interferometry: error analysis

    International Nuclear Information System (INIS)

    Biswas, Amiya; Coupland, Jeremy

    2010-01-01

    Synthetic aperture interferometry (SAI) is a novel way of testing aspherics and has a potential for in-process measurement of aspherics [Appl. Opt.42, 701 (2003)].APOPAI0003-693510.1364/AO.42.000701 A method to measure steep aspherics using the SAI technique has been previously reported [Appl. Opt.47, 1705 (2008)].APOPAI0003-693510.1364/AO.47.001705 Here we investigate the computation of surface form using the SAI technique in different configurations and discuss the computational errors. A two-pass measurement strategy is proposed to reduce the computational errors, and a detailed investigation is carried out to determine the effect of alignment errors on the measurement process.

  12. Figure and Ground in the Visual Cortex: V2 Combines Stereoscopic Cues with Gestalt Rules

    Science.gov (United States)

    Qiu, Fangtu T.; von der Heydt, Rüdiger

    2006-01-01

    Figure-ground organization is a process by which the visual system identifies some image regions as foreground and others as background, inferring three-dimensional (3D) layout from 2D displays. A recent study reported that edge responses of neurons in area V2 are selective for side-of-figure, suggesting that figure-ground organization is encoded in the contour signals (border-ownership coding). Here we show that area V2 combines two strategies of computation, one that exploits binocular stereoscopic information for the definition of local depth order, and another that exploits the global configuration of contours (gestalt factors). These are combined in single neurons so that the ‘near’ side of the preferred 3D edge generally coincides with the preferred side-of-figure in 2D displays. Thus, area V2 represents the borders of 2D figures as edges of surfaces, as if the figures were objects in 3D space. Even in 3D displays gestalt factors influence the responses and can enhance or null the stereoscopic depth information. PMID:15996555

  13. Figure and ground in the visual cortex: v2 combines stereoscopic cues with gestalt rules.

    Science.gov (United States)

    Qiu, Fangtu T; von der Heydt, Rüdiger

    2005-07-07

    Figure-ground organization is a process by which the visual system identifies some image regions as foreground and others as background, inferring 3D layout from 2D displays. A recent study reported that edge responses of neurons in area V2 are selective for side-of-figure, suggesting that figure-ground organization is encoded in the contour signals (border ownership coding). Here, we show that area V2 combines two strategies of computation, one that exploits binocular stereoscopic information for the definition of local depth order, and another that exploits the global configuration of contours (Gestalt factors). These are combined in single neurons so that the "near" side of the preferred 3D edge generally coincides with the preferred side-of-figure in 2D displays. Thus, area V2 represents the borders of 2D figures as edges of surfaces, as if the figures were objects in 3D space. Even in 3D displays, Gestalt factors influence the responses and can enhance or null the stereoscopic depth information.

  14. Inborn errors of metabolism

    Science.gov (United States)

    Metabolism - inborn errors of ... Bodamer OA. Approach to inborn errors of metabolism. In: Goldman L, Schafer AI, eds. Goldman-Cecil Medicine . 25th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap 205. Rezvani I, Rezvani GA. An ...

  15. Display-wide influences on figure-ground perception: the case of symmetry.

    Science.gov (United States)

    Mojica, Andrew J; Peterson, Mary A

    2014-05-01

    Past research has demonstrated that convex regions are increasingly likely to be perceived as figures as the number of alternating convex and concave regions in test displays increases. This region-number effect depends on both a small preexisting preference for convex over concave objects and the presence of scene characteristics (i.e., uniform fill) that allow the integration of the concave regions into a background object/surface. These factors work together to enable the percept of convex objects in front of a background. We investigated whether region-number effects generalize to another property, symmetry, whose effectiveness as a figure property has been debated. Observers reported which regions they perceived as figures in black-and-white displays with alternating symmetric/asymmetric regions. In Experiments 1 and 2, the displays had articulated outer borders that preserved the symmetry/asymmetry of the outermost regions. Region-number effects were not observed, although symmetric regions were perceived as figures more often than chance. We hypothesized that the articulated outer borders prevented fitting a background interpretation to the asymmetric regions. In Experiment 3, we used straight-edge framelike outer borders and observed region-number effects for symmetry equivalent to those observed for convexity. These results (1) show that display-wide information affects figure assignment at a border, (2) extend the evidence indicating that the ability to fit background as well as foreground interpretations is critical in figure assignment, (3) reveal that symmetry and convexity are equally effective figure cues and, (4) demonstrate that symmetry serves as a figural property only when it is close to fixation.

  16. Drug Errors in Anaesthesiology

    Directory of Open Access Journals (Sweden)

    Rajnish Kumar Jain

    2009-01-01

    Full Text Available Medication errors are a leading cause of morbidity and mortality in hospitalized patients. The incidence of these drug errors during anaesthesia is not certain. They impose a considerable financial burden to health care systems apart from the patient losses. Common causes of these errors and their prevention is discussed.

  17. ATC operational error analysis.

    Science.gov (United States)

    1972-01-01

    The primary causes of operational errors are discussed and the effects of these errors on an ATC system's performance are described. No attempt is made to specify possible error models for the spectrum of blunders that can occur although previous res...

  18. FIGURATIVE AND LEXICAL VARIETIES IN FACEBOOK POSTS

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Vina Widiadnya Putri

    2017-11-01

    Full Text Available Language is a highly elaborated signaling system. It serves various functions in communication, it is used to share ideas, convey feelings and emotions, etc. The researchers are interested to uncover more on how people use language in terms of its variety and lexical in one of the popular social media networking platforms that we all know as Facebook. Based on the aforementioned background of the study, the problem of the research can be formulated as follows: (1 what are the figurative languages used in Facebook posts by female and male Facebook users? (2 How are the emotional lexical varieties e.g. used in Facebook posts? Method of research is a procedure needed to do the research better. In this case, method of research covers data source, data collection and data analysis. The data of this research have been taken from Facebook, it is as an online social networking website where people can create profiles, share information such as photos and quotes about themselves, and respond or link to the information posted by others. The method that used in collecting data is method of library research. They are collected by reading the Facebook user’s post, by underlining and note taking as well. The data analysis is the last step in this process of writing this research. The analysis is done by descriptive method. To make the analysis clearer, all of examples are completed with explanation. Referring to the first research problem, there are some figurative languages used by the Facebook users such as, Simile (female 1 or 4.3% and male 0%, Metaphor (female 4 or 17.3% and male 0%,, Personification (female 3 or 1.3% and male 1% or 4.3%,, Hyperbole (female 4 or 17.3% and male 1 or 4.3%, and Idiom (female 3 or 13% and male 0%,. Furthermore, in regards to the second problem that is emotional lexical used by the Facebook Users, we could mention that both the Augmentatives (female 3 or 13% and male 1 or 4.3%, and Euphemisms (female 1 or 4.3% and male 1 or

  19. Administration Medication Errors in Emergency Department in Level III Hospital

    OpenAIRE

    Silvia González Gómez

    2012-01-01

    • Objective: To determine the prevalence of medication errors associated with the administration in the emergency room of University Hospital Marques de Valdecilla. • Introduction: Adverse events related to health care, are increasingly common, it is estimated that between 44000 and 98000 people served in U.S. hospitals die from adverse events related to health care. In 7000 these deaths are caused by medication errors. In Spain the studies speak of similar figures. The emergency services are...

  20. A Behavioral Analysis of Figurative Language in Psychotherapy: One Session in a Single Case Study.

    Science.gov (United States)

    Pollio, Howard R.; Barlow, Jack M.

    Assuming that all problem solving has both its rational and poetic aspects and that the solution to a problem is often found in the poetic well before it surfaces in the rational, this study examined in detail the ebb and flow of figurative language as it occurred in the course of a single, highly successful hour of gestalt therapy involving both…

  1. Un lieu pour les figures dans la théorie de l’argumentation A Place for Rhetorical Figures in Argumentation Theory

    Directory of Open Access Journals (Sweden)

    Christian Plantin

    2009-04-01

    Full Text Available A partir du traitement des figures dans le Traité de l’Argumentation (TA de Perelman et Olbrechts-Tyteca, cet article porte sur la question de la place des figures dans la théorie de l’argumentation. La première partie revient brièvement sur différentes formes de rhétorique, dont une rhétorique de l’ornement ayant pour instrument principal les figures. Une théorie moderne de l’argumentation orientée vers la recherche des fallacies établit une coupure radicale entre argumentation, instrument de recherche de la vérité et rhétorique ornée, que Locke caractérise comme « a powerful instrument of error and deceit ». Cette conception suppose l’usage d’un langage qu’on peut rapidement caractériser comme « artificiel », qui n’est pas celui de l’argumentation ordinaire. Avant d’être des « decorations » les figures sont des « instruments » de structuration de la parole ; et les topoi, instruments de l’argumentation, n’obéissent pas à d’autres mécanismes que les tropes, qui semblent toujours parler à côté et manquer leur objet. La seconde partie s’intéresse à une partie quelque peu délaissée du TA, l’usage qu’il fait des figures et la vision théorique, à la fois cavalière et décisive, qu’il en propose. Le TA ouvre la voie à une conception des figures non pas comme « vain ornement » mais comme une première sémantique du discours argumentatif ; c’est ce qu’on peut montrer sur le cas des « figures du choix, de la présence et de la communion ». En conséquence, la pensée des figures peut et doit être intégrée à une théorie de l’argumentation qui prend en compte le langage dans la parole, avec ses stratégies de construction des objets, du locuteur, de l’interlocuteur et de leurs émotions.This paper deals with the treatment of figures of speech in Perelman’s and Olbrechts-Tyteca’s Treatise on Argumentation (TA, and, more broadly, with the place of

  2. Evaluation of layback spin in figure skating

    Directory of Open Access Journals (Sweden)

    Jastšenjski Ksenija

    2011-01-01

    Full Text Available Layback spin is considered as one of the most beautiful and elegant spins performed in figure skating. It is also one of the required spins in competitive short program in female category. Different techniques of executing layback spin with variations in changing the positions of free parts of the body, as well as the evaluation of layback spin in accordance with ISU rules and regulations, which have been used in all International Skating Federation competitions since 2004 (World and European championships, Olympic Games are presented in this paper. Due to very difficult position of the body while performing a layback spin, it is essential that the skaters who want to master it should have excellent agility (especially of the spinal column and shoulder and knee joints and balance. Layback spin performance requires significant skating knowledge, so it cannot be performed by beginners. Depending on the fl exibility and creativity, a skater can execute various positions of the head, arms, body and free leg while performing a layback spin. In some cases, these variations can increase the level of difficulty, and in others only the mark given for executing this spin.

  3. The midwife figure: a historiographical inquiry

    Directory of Open Access Journals (Sweden)

    Clotilde Cicatiello

    2013-10-01

    Full Text Available The history of midwifery, fairly disregarded by Italian historiography, results crucial in order to fully understand both the role of women and of the foundation of the family in post-unification Italy. It firmly highlights the complexity, the undertones and, sometimes, the contradictions of the female models. The historical research, mainly in the English area, has fully recognized the indisputable significance of the midwives’ role. As a matter of fact, they emerge as representatives of medical professions in the volume by Willem Tousijn, Il sistema delle occupazioni sanitarie (2000, which combines both historical reconstruction and sociological survey. If, on the one hand, the history of midwifery is quite acquainted for the 17th and 18th centuries, thanks to the works by Mireill Laget (1982, and by Jacques Gélis (1988, on the other hand, however, the 19th century still remains to be written for the great part. In Italy, Laura Guidi, Claudia Pancino and Alessandra Gissi have traced an outline of the midwives’ path for their professional achievement throughout the 19th and the 20th centuries. This article briefly reviews these themes, rereading the texts and focusing, in particular, on the question of the professionalization of the midwife and on its actual recognition as a professional figure.

  4. An economics figure of merit in ALPS

    International Nuclear Information System (INIS)

    Shatilla, Y.A.

    2000-01-01

    One of the most pressing issues facing the deregulated nuclear electric power industry is its economic competitiveness when compared to other sources of electrical power. Traditionally, finding the optimum loading pattern (LP) that meets all the safety and operational objective functions and at the same time produces the most attractive economical solutions is an iterative process. This is because (a) LP search tools usually lack the capability to generate equilibrium solutions and (b) economics objective functions are hard to include in the search process. In this paper, the Westinghouse Advanced Loading Pattern Search code (ALPS) has been demonstrated to successfully find LPs that meet user-defined operational and safety as well as economics objectives. This has been made possible by the development of TULIP language that allows the integration of external procedures into the search process of the main program, ALPS. In the example given, an economic figure of merit (EFM) has been defined and included via TULIP script into the fuel management optimization problem of a three-loop Westinghouse core operating an 18-month cycle. The LPs found by ALPS exhibit a clear trend of meeting and, in some cases, exceeding the EFM objective function defined for the ALPS search process a priori

  5. Organometallic chemistry of metal surfaces

    International Nuclear Information System (INIS)

    Muetterties, E.L.

    1981-06-01

    The organometallic chemistry of metal surfaces is defined as a function of surface crystallography and of surface composition for a set of cyclic hydrocarbons that include benzene, toluene, cyclohexadienes, cyclohexene, cyclohexane, cyclooctatetraene, cyclooctadienes, cyclooctadiene, cycloheptatriene and cyclobutane. 12 figures

  6. Aircraft system modeling error and control error

    Science.gov (United States)

    Kulkarni, Nilesh V. (Inventor); Kaneshige, John T. (Inventor); Krishnakumar, Kalmanje S. (Inventor); Burken, John J. (Inventor)

    2012-01-01

    A method for modeling error-driven adaptive control of an aircraft. Normal aircraft plant dynamics is modeled, using an original plant description in which a controller responds to a tracking error e(k) to drive the component to a normal reference value according to an asymptote curve. Where the system senses that (1) at least one aircraft plant component is experiencing an excursion and (2) the return of this component value toward its reference value is not proceeding according to the expected controller characteristics, neural network (NN) modeling of aircraft plant operation may be changed. However, if (1) is satisfied but the error component is returning toward its reference value according to expected controller characteristics, the NN will continue to model operation of the aircraft plant according to an original description.

  7. Prevalence of Refractive errors among Primary School Pupils in ...

    African Journals Online (AJOL)

    Administrator

    Computer generated random numbers were used to randomly select Kilungu divison from 5 divisions ... 94.4% (1358) had normal vision (=6/18). The prevalence of refractive errors was 5.2% (95% CI). 0. 50. 100. 150 ... all cases of reduced vision (figure 2). This was almost half of what Nzuki et al found in Nairobi's. Langata ...

  8. Error detection method

    Science.gov (United States)

    Olson, Eric J.

    2013-06-11

    An apparatus, program product, and method that run an algorithm on a hardware based processor, generate a hardware error as a result of running the algorithm, generate an algorithm output for the algorithm, compare the algorithm output to another output for the algorithm, and detect the hardware error from the comparison. The algorithm is designed to cause the hardware based processor to heat to a degree that increases the likelihood of hardware errors to manifest, and the hardware error is observable in the algorithm output. As such, electronic components may be sufficiently heated and/or sufficiently stressed to create better conditions for generating hardware errors, and the output of the algorithm may be compared at the end of the run to detect a hardware error that occurred anywhere during the run that may otherwise not be detected by traditional methodologies (e.g., due to cooling, insufficient heat and/or stress, etc.).

  9. Stachler et al. 2017 Figure 2 data

    Data.gov (United States)

    U.S. Environmental Protection Agency — Estimated mean log10 concentration of genetic markers for CQQ_056, CPQ_064, HF183/BacR287, and HumM2 genetic markers in nine sewage and two surface water samples....

  10. Lighting, backlighting and watercolor illusions and the laws of figurality.

    Science.gov (United States)

    Pinna, Baingio; Reeves, Adam

    2006-01-01

    We report some novel 'lighting' and 'backlighting' effects in plane figures similar to those which induce the 'watercolor illusion', that is, figures made with outlines composed of juxtaposed parallel lines varying in brightness and chromatic color. These new effects show 'illumination' as an emergent percept, and show how arrangements of 'dark and light' along the boundaries of various plane figures model the volume and strengthen the illusion of depth. To account for these various effects we propose several phenomenological 'laws of figurality' to add to the Gestalt laws of organization and figure-ground segregation. We offer a set of meta-laws which are speculative but which serve to integrate and organize the phenomenological laws. These laws indicate how luminance gradient profiles across boundary contours define both the 3D appearance of figures and the properties of the light reflected from their volumetric shapes.

  11. Errors in Neonatology

    OpenAIRE

    Antonio Boldrini; Rosa T. Scaramuzzo; Armando Cuttano

    2013-01-01

    Introduction: Danger and errors are inherent in human activities. In medical practice errors can lean to adverse events for patients. Mass media echo the whole scenario. Methods: We reviewed recent published papers in PubMed database to focus on the evidence and management of errors in medical practice in general and in Neonatology in particular. We compared the results of the literature with our specific experience in Nina Simulation Centre (Pisa, Italy). Results: In Neonatology the main err...

  12. Advances in Fabrication Materials of Honeycomb Structure Films by the Breath-Figure Method

    Science.gov (United States)

    Heng, Liping; Wang, Bin; Li, Muchen; Zhang, Yuqi; Jiang, Lei

    2013-01-01

    Creatures in nature possess almost perfect structures and properties, and exhibit harmonization and unification between structure and function. Biomimetics, mimicking nature for engineering solutions, provides a model for the development of functional surfaces with special properties. Recently, honeycomb structure materials have attracted wide attention for both fundamental research and practical applications and have become an increasingly hot research topic. Though progress in the field of breath-figure formation has been reviewed, the advance in the fabrication materials of bio-inspired honeycomb structure films has not been discussed. Here we review the recent progress of honeycomb structure fabrication materials which were prepared by the breath-figure method. The application of breath figures for the generation of all kinds of honeycomb is discussed. PMID:28809319

  13. Correction for quadrature errors

    DEFF Research Database (Denmark)

    Netterstrøm, A.; Christensen, Erik Lintz

    1994-01-01

    In high bandwidth radar systems it is necessary to use quadrature devices to convert the signal to/from baseband. Practical problems make it difficult to implement a perfect quadrature system. Channel imbalance and quadrature phase errors in the transmitter and the receiver result in error signals......, which appear as self-clutter in the radar image. When digital techniques are used for generation and processing or the radar signal it is possible to reduce these error signals. In the paper the quadrature devices are analyzed, and two different error compensation methods are considered. The practical...

  14. Logo design: examining consumer response to figurativeness across cultures

    OpenAIRE

    Machado, Joana César; Vacas de Carvalho, Leonor; Torres, Anna; Van de Velden, Michel; Costa, Patrício

    2014-01-01

    Literature concerned with logo strategy suggests that the aesthetic appeal of brand logo significantly influences consumer reactions. The main purpose of this research is to study the influence of the different categories of figurative logo designs on consumer response. Through two studies in three countries, this research sheds light on consumer logo preferences, by investigating the psychological properties of the figurativeness of logo design. Results showed that figurativeness is an essen...

  15. Surfacing Moves

    DEFF Research Database (Denmark)

    Lutz, Peter

    2013-01-01

    such as schedules, machines, and aging bodies. To this end, the article also experiments with ‘surfacing’ as an ethnographic heuristic for figuring these different ‘spatial-timings’. The article concludes that surfacing matters not only in senior home care but also in the field-desks of ethnographic analysis....

  16. Determination of the crystallite orientation distribution from direct pole figures

    International Nuclear Information System (INIS)

    Araujo Gomes, P.A.M. de.

    1977-01-01

    A method is described which allows to calculate the crystallite orientation distribution in polycrystalline material, from direct pole figures data of its crystallographic planes (Roe's Method). The programme was applied to (1010), (0002), (1011) and (1120) complete pole figures data for a commercial, thin sheet Zircaloy-4 tubing specimen. A semi-automatic Rigaku-Denki texture goniometer, which scans the reciprocal lattice sphere pointwise outputting the data in a punched tape, was used to obtain the pole figures. This is consistent with the results obtained through direct conclusion from the pole figures. (author)

  17. Beyond captions: linking figures with abstract sentences in biomedical articles.

    Directory of Open Access Journals (Sweden)

    Joseph P Bockhorst

    Full Text Available Although figures in scientific articles have high information content and concisely communicate many key research findings, they are currently under utilized by literature search and retrieval systems. Many systems ignore figures, and those that do not typically only consider caption text. This study describes and evaluates a fully automated approach for associating figures in the body of a biomedical article with sentences in its abstract. We use supervised methods to learn probabilistic language models, hidden Markov models, and conditional random fields for predicting associations between abstract sentences and figures. Three kinds of evidence are used: text in abstract sentences and figures, relative positions of sentences and figures, and the patterns of sentence/figure associations across an article. Each information source is shown to have predictive value, and models that use all kinds of evidence are more accurate than models that do not. Our most accurate method has an F1-score of 69% on a cross-validation experiment, is competitive with the accuracy of human experts, has significantly better predictive accuracy than state-of-the-art methods and enables users to access figures associated with an abstract sentence with an average of 1.82 fewer mouse clicks. A user evaluation shows that human users find our system beneficial. The system is available at http://FigureItOut.askHERMES.org.

  18. Beyond captions: linking figures with abstract sentences in biomedical articles.

    Science.gov (United States)

    Bockhorst, Joseph P; Conroy, John M; Agarwal, Shashank; O'Leary, Dianne P; Yu, Hong

    2012-01-01

    Although figures in scientific articles have high information content and concisely communicate many key research findings, they are currently under utilized by literature search and retrieval systems. Many systems ignore figures, and those that do not typically only consider caption text. This study describes and evaluates a fully automated approach for associating figures in the body of a biomedical article with sentences in its abstract. We use supervised methods to learn probabilistic language models, hidden Markov models, and conditional random fields for predicting associations between abstract sentences and figures. Three kinds of evidence are used: text in abstract sentences and figures, relative positions of sentences and figures, and the patterns of sentence/figure associations across an article. Each information source is shown to have predictive value, and models that use all kinds of evidence are more accurate than models that do not. Our most accurate method has an F1-score of 69% on a cross-validation experiment, is competitive with the accuracy of human experts, has significantly better predictive accuracy than state-of-the-art methods and enables users to access figures associated with an abstract sentence with an average of 1.82 fewer mouse clicks. A user evaluation shows that human users find our system beneficial. The system is available at http://FigureItOut.askHERMES.org.

  19. Structural Configuration of Myelin Figures Using Fluorescence Microscopy

    Directory of Open Access Journals (Sweden)

    Lobat Tayebi

    2012-01-01

    Full Text Available Using epifluorescence microscopy, the configuration of myelin figures that are formed upon hydration of lipid stack was studied qualitatively. Little knowledge is currently available for conditions that determine the diameter of myelin figures and their degree of multilamellarity. Examining more than 300 samples, we realized that there are distinct populations of myelin figures protruding from discrete regions of lipid stack. Each population contains myelin figures with similar diameters. This indicates a direct relationship between local characteristics of parent lipid stack and the diameter of myelin figures. Evidenced by fluorescent images, we classified all the observed myelin figures into three major groups of (1 solid tubes, (2 thin tethers, and (3 hollow tubes. Solid tubes are the most common structure of myelin figures which appeared as dense shiny cylinders. Thin tethers, with long hair-shaped structure, were observed protruding from part of lipid plaque which is likely to be under tension. Hollow tubes were protruded from the parts that are unpinned from the substrate and possibly under low or no tension. The abrupt change in the configuration of myelin figures from solid tubes to hollow ones was described in a reproducible experiment where the pinned region of the parent stack became unpinned. Our observations can indicate a relation between the membrane tension of the source material and the diameter of the myelin figures.

  20. The watercolor effect: a new principle of grouping and figure-ground organization.

    Science.gov (United States)

    Pinna, Baingio; Werner, John S; Spillmann, Lothar

    2003-01-01

    The watercolor effect is perceived when a dark (e.g., purple) contour is flanked by a lighter chromatic contour (e.g., orange). Under these conditions, the lighter color will assimilate over the entire enclosed area. This filling-in determines figure-ground organization when it is pitted against the classical Gestalt factors of proximity, good continuation, closure, symmetry, convexity, as well as amodal completion, and past experience. When it is combined with a given Gestalt factor, the resulting effect on figure-ground organization is stronger than for each factor alone. When the watercolor effect is induced by a dark red edge instead of an orange edge, its figural strength is reduced, but still stronger than without it. Finally, when a uniform surface is filled physically using the color of the orange fringe, figure-ground organization is not different from that for the purple contour only. These findings show that the watercolor effect induced by the edge could be an independent factor, different from the classical Gestalt factors of figure-ground organization. Copyright 2002 Elsevier Science Ltd.

  1. INDONESIAN EFL ADVANCED LEARNERS' GRAMMATICAL ERRORS

    Directory of Open Access Journals (Sweden)

    Josefa J. Mardijono

    2003-01-01

    Full Text Available This paper is based on an error analysis of the written work of the English Department students who have finished the seventh semester of a four-year undergraduate English Program. The source of the data consists of seventeen proposals for linguistics researches, as the final projects upon the completion of the undergraduate study year 2001 in Petra Christian University. The purpose of the study is to reveal the grammatical errors and to find out the types of errors and their frequency of occurrence in the students' written work. The errors collected are identified and classified using Linguistic Category Taxonomy as a guideline. To describe the errors, Surface Strategy Taxonomy is employed to explain the ways surface structures are altered. The findings present the types of morphological and syntactic errors, their detailed description, and the frequency of occurrence of each error type. It is hoped that this study will give a new perspective in the advanced learners' grammatical errors, and provide data for teachers and syllabus designers dealing with English Grammar.

  2. Study of ordered macroporous polymer films by templating breath figures

    Science.gov (United States)

    Song, Lulu

    2005-11-01

    Macroporous films with highly ordered pore patterns have many potential applications. Some examples include microstructured electrode surfaces, photonic band gap materials and filters for cell sorting and bio-interfaces. In this dissertation we discuss a "moist-casting" method to prepare hexagonally-ordered macroporous films with pore sizes in the range of sub-micron to several microns, where condensed water droplets ("breath figures") work as templates. Compared with other templating methods, this one is fast and simple. Well-ordered porous films can be obtained in tens of seconds and the pore size can be easily tailored and dynamically controlled by adjusting the casting conditions. More importantly, there is no need to remove the templates; water droplets just evaporate when the casting processes are finished. This study was carried out with the intention of characterizing the structures, understanding film-formation processes and exploring special properties and possible applications. For the structural characterization, film morphology was studied in detail by normal optical microscopy and laser scanning confocal microscopy (LSCM). Several interesting features have been revealed. Meanwhile, the degree of the order of the porous structures were characterized both in real space via Voronoi diagram and bond-orientational correlation function, and in reciprocal space via Fraunhofer diffraction pattern. To further understand the mechanism, the evaporation of the polymer solutions during the film formation was studied by monitoring their mass over time. Besides, the evolution of breath figures formed on the evaporating polymer solutions was in-situ recorded via a high-speed camera coupled to an optical microscope. Combined with the information on the film structures obtained via LSCM, explanations for some detailed features have been attempted. Wetting property of these films was studied in some detail. The films exhibited "lotus effect", mimicking natural non

  3. Figures and First Years: Examining first-year Calculus I student ability to incorporate figures into technical reports

    Science.gov (United States)

    Antonacci, Nathan; Rogers, Michael; Pfaff, Thomas

    This three-year study focused on first-year Calculus I students and their abilities to incorporate figures into technical reports. Students were handed guidelines as part of their Multidisciplinary Sustainability Education Module meant to aid them in crafting effective figures. Figure-specific questionnaires were added in the class to gain insight into the quantitative literacy skills students possessed both before starting their course and after its completion. Reviews of the figures in 78 technical reports written by 106 students showed repeated failure to refer to figures in discussion sections and use them in evidence-based arguments. Analysis of quantitative literacy skills revealed that the students could both read and interpret figures, suggesting that issues with literacy were not the main contributor to the sub-par graphs.

  4. Action errors, error management, and learning in organizations.

    Science.gov (United States)

    Frese, Michael; Keith, Nina

    2015-01-03

    Every organization is confronted with errors. Most errors are corrected easily, but some may lead to negative consequences. Organizations often focus on error prevention as a single strategy for dealing with errors. Our review suggests that error prevention needs to be supplemented by error management--an approach directed at effectively dealing with errors after they have occurred, with the goal of minimizing negative and maximizing positive error consequences (examples of the latter are learning and innovations). After defining errors and related concepts, we review research on error-related processes affected by error management (error detection, damage control). Empirical evidence on positive effects of error management in individuals and organizations is then discussed, along with emotional, motivational, cognitive, and behavioral pathways of these effects. Learning from errors is central, but like other positive consequences, learning occurs under certain circumstances--one being the development of a mind-set of acceptance of human error.

  5. Medical error and disclosure.

    Science.gov (United States)

    White, Andrew A; Gallagher, Thomas H

    2013-01-01

    Errors occur commonly in healthcare and can cause significant harm to patients. Most errors arise from a combination of individual, system, and communication failures. Neurologists may be involved in harmful errors in any practice setting and should familiarize themselves with tools to prevent, report, and examine errors. Although physicians, patients, and ethicists endorse candid disclosure of harmful medical errors to patients, many physicians express uncertainty about how to approach these conversations. A growing body of research indicates physicians often fail to meet patient expectations for timely and open disclosure. Patients desire information about the error, an apology, and a plan for preventing recurrence of the error. To meet these expectations, physicians should participate in event investigations and plan thoroughly for each disclosure conversation, preferably with a disclosure coach. Physicians should also anticipate and attend to the ongoing medical and emotional needs of the patient. A cultural change towards greater transparency following medical errors is in motion. Substantial progress is still required, but neurologists can further this movement by promoting policies and environments conducive to open reporting, respectful disclosure to patients, and support for the healthcare workers involved. © 2013 Elsevier B.V. All rights reserved.

  6. Learning from Errors

    Science.gov (United States)

    Metcalfe, Janet

    2017-01-01

    Although error avoidance during learning appears to be the rule in American classrooms, laboratory studies suggest that it may be a counterproductive strategy, at least for neurologically typical students. Experimental investigations indicate that errorful learning followed by corrective feedback is beneficial to learning. Interestingly, the…

  7. Blurring the Edges: Ricoeur and Rothko on Metaphorically Figuring the Non-Figural

    Directory of Open Access Journals (Sweden)

    B. Keith Putt

    2017-02-01

    Full Text Available This essay examines Ricœur’s mimetic and transfigurative perspective on non-objective art and adopts it as an idiom for examining Mark Rothko’s artistic intention in the multiform canvases of his “classical” period from 1949 until his death in 1970. Rothko unequivocally denied being an abstractionist, a colorist, or a formalist, insisting, on the contrary, that he desired to communicate discrete dimensions of experience and emotions to his viewers, specifically, experiences of the sacred and the spiritual. His large canvases, with their blurred edges, force the spectator into an intimacy of experience that opens the potentiality of heterogeneous interpretations. In other words, one might consider his paintings to be metaphors of dense meanings that imitate reality, not through facile representation, but through a Kierkegaardian repetition of worlds that track Ricœur’s own ideas of prefiguration, configuration, and re-figuration. I contend in this essay that Rothko’s “abstract expressionism” adequately illustrates Ricœur’s contention that non-figurative art succeeds far better than representational art in refiguring new worlds of meaning.

  8. Figure 1. Associations between pre-ART clinical and laboratory ...

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Figure 1. Associations between pre-ART clinical and laboratory characteristics with subsequent TB-IRIS events. Figure 1. Associations between pre-ART clinical and laboratory characteristics with subsequent TB-IRIS events.

  9. A new principle of figure-ground segregation : The accentuation

    NARCIS (Netherlands)

    Pinna, Baingio; Reeves, Adam; Koenderink, Jan; van Doorn, Andrea; Deiana, Katia

    2018-01-01

    The problem of perceptual organization was studied by Gestalt psychologists in terms of figure-ground segregation. In this paper we explore a new principle of figure-ground segregation: accentuation. We demonstrate the effectiveness of accentuation relative to other Gestalt principles, and also

  10. 16 CFR Figure 1 to Part 1511 - Pacifier Test Fixture

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Pacifier Test Fixture 1 Figure 1 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt. 1511, Fig. 1 Figure 1 to Part 1511—Pacifier Test Fixture EC03OC91...

  11. Transformation of the Incomplete Figure in Young Children

    Science.gov (United States)

    Noda, Mitsuru

    2014-01-01

    This study aims to examine the developmental changes in young children's perception. A matching completion task consisting of three geometric figures and one bird-like figure were completed by children 3-5 years of age ("N" = 99). The rotation effect, in which the correct response decreased with orientation (45°, 90° 135°, and 180°), was…

  12. Distinguishing between Realistic and Fantastical Figures in Iran

    Science.gov (United States)

    Davoodi, Telli; Corriveau, Kathleen H.; Harris, Paul L.

    2016-01-01

    Children in the United States come to distinguish historical from fictional story figures between the ages of 3 and 5 years, guided by the plausibility of the story events surrounding the figure (Corriveau, Kim, Schwalen, & Harris, 2009; Woolley & Cox, 2007). However, U.S. children vary in their reactions to stories that include…

  13. 16 CFR Figure 6 to Part 1203 - Field of Vision

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Field of Vision 6 Figure 6 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 6 Figure 6 to Part 1203—Field of Vision ER10MR98.006 ...

  14. Double conoscopic figures in total-internal-reflection prisms

    Science.gov (United States)

    Litvinova, M. N.; Stroganov, V. I.; Krishtop, V. V.; Alekseeva, L. V.; Pas'ko, P. G.

    2006-01-01

    This paper presents the results of a study of the features of the formation of double conoscopic figures in total-internal-reflection prisms. The conditions for the existence of double conoscopic figures in the absence of a polarizer and analyzer are explained. An experiment has been done with prisms fabricated from crystals of calcite, potassium dihydrogen phosphate (KDP) and lithium niobate.

  15. Figurative framing : Shaping public discourse through metaphor, hyperbole and irony

    NARCIS (Netherlands)

    Burgers, C.; Konijn, E.A.; Steen, G.J.

    2016-01-01

    Framing is an important concept in communication, yet many framing studies set out to develop frames relevant to only one issue. We expand framing theory by introducing figurative framing. We posit that figurative language types like metaphor, hyperbole and irony are important in shaping public

  16. Figurative framing: Shaping public discourse through metaphor, hyperbole and irony

    NARCIS (Netherlands)

    Burgers, C.F.; Konijn, E.A.; Steen, G.J.

    2016-01-01

    Framing is an important concept in communication, yet many framing studies set out to develop frames relevant to only one issue. We expand framing theory by introducing figurative framing. We posit that figurative language types like metaphor, hyperbole and irony are important in shaping public

  17. 47 CFR 90.309 - Tables and figures.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Tables and figures. 90.309 Section 90.309... MOBILE RADIO SERVICES Authorization in the Band 470-512 MHz (UHF-TV Sharing) § 90.309 Tables and figures... published for the area in question, the next best topographic information should be used. (5) Applicants for...

  18. Figures of Association and Sound in some Nigerian Proverbs ...

    African Journals Online (AJOL)

    Nekky Umera

    Figures of Association and Sound in some Nigerian. Proverbs: Examples from Ondo Culture. (Pp. 118-132). Akinmade, C. Arinola - Department of English, University of Jos. arinakinmade@yahoo.com. Abstract. Figures of Speech are expressions which depart from the acceptable literary sense that are employed to give ...

  19. The naked truth about my classical nude figures.

    Science.gov (United States)

    Burnett, Roger

    2002-02-28

    The story 'Concerns raised over nudes at cancer clinic' (news February 13) does not truly reflect the situation. Although the hospital authorities had concerns about placing the classical nude figures in the hospital environment, the overwhelming response from the public has been positive. Moreover, considerable support for the figures has come from cancer patients.

  20. Dynamic Reaction Figures: An Integrative Vehicle for Understanding Chemical Reactions

    Science.gov (United States)

    Schultz, Emeric

    2008-01-01

    A highly flexible learning tool, referred to as a dynamic reaction figure, is described. Application of these figures can (i) yield the correct chemical equation by simply following a set of menu driven directions; (ii) present the underlying "mechanism" in chemical reactions; and (iii) help to solve quantitative problems in a number of different…

  1. Optimizing learning of a locomotor task: amplifying errors as needed.

    Science.gov (United States)

    Marchal-Crespo, Laura; López-Olóriz, Jorge; Jaeger, Lukas; Riener, Robert

    2014-01-01

    Research on motor learning has emphasized that errors drive motor adaptation. Thereby, several researchers have proposed robotic training strategies that amplify movement errors rather than decrease them. In this study, the effect of different robotic training strategies that amplify errors on learning a complex locomotor task was investigated. The experiment was conducted with a one degree-of freedom robotic stepper (MARCOS). Subjects were requested to actively coordinate their legs in a desired gait-like pattern in order to track a Lissajous figure presented on a visual display. Learning with three different training strategies was evaluated: (i) No perturbation: the robot follows the subjects' movement without applying any perturbation, (ii) Error amplification: existing errors were amplified with repulsive forces proportional to errors, (iii) Noise disturbance: errors were evoked with a randomly-varying force disturbance. Results showed that training without perturbations was especially suitable for a subset of initially less-skilled subjects, while error amplification seemed to benefit more skilled subjects. Training with error amplification, however, limited transfer of learning. Random disturbing forces benefited learning and promoted transfer in all subjects, probably because it increased attention. These results suggest that learning a locomotor task can be optimized when errors are randomly evoked or amplified based on subjects' initial skill level.

  2. Uncorrected refractive errors

    Directory of Open Access Journals (Sweden)

    Kovin S Naidoo

    2012-01-01

    Full Text Available Global estimates indicate that more than 2.3 billion people in the world suffer from poor vision due to refractive error; of which 670 million people are considered visually impaired because they do not have access to corrective treatment. Refractive errors, if uncorrected, results in an impaired quality of life for millions of people worldwide, irrespective of their age, sex and ethnicity. Over the past decade, a series of studies using a survey methodology, referred to as Refractive Error Study in Children (RESC, were performed in populations with different ethnic origins and cultural settings. These studies confirmed that the prevalence of uncorrected refractive errors is considerably high for children in low-and-middle-income countries. Furthermore, uncorrected refractive error has been noted to have extensive social and economic impacts, such as limiting educational and employment opportunities of economically active persons, healthy individuals and communities. The key public health challenges presented by uncorrected refractive errors, the leading cause of vision impairment across the world, require urgent attention. To address these issues, it is critical to focus on the development of human resources and sustainable methods of service delivery. This paper discusses three core pillars to addressing the challenges posed by uncorrected refractive errors: Human Resource (HR Development, Service Development and Social Entrepreneurship.

  3. Errors in neuroradiology.

    Science.gov (United States)

    Caranci, Ferdinando; Tedeschi, Enrico; Leone, Giuseppe; Reginelli, Alfonso; Gatta, Gianluca; Pinto, Antonio; Squillaci, Ettore; Briganti, Francesco; Brunese, Luca

    2015-09-01

    Approximately 4 % of radiologic interpretation in daily practice contains errors and discrepancies that should occur in 2-20 % of reports. Fortunately, most of them are minor degree errors, or if serious, are found and corrected with sufficient promptness; obviously, diagnostic errors become critical when misinterpretation or misidentification should significantly delay medical or surgical treatments. Errors can be summarized into four main categories: observer errors, errors in interpretation, failure to suggest the next appropriate procedure, failure to communicate in a timely and a clinically appropriate manner. Misdiagnosis/misinterpretation percentage should rise up in emergency setting and in the first moments of the learning curve, as in residency. Para-physiological and pathological pitfalls in neuroradiology include calcification and brain stones, pseudofractures, and enlargement of subarachnoid or epidural spaces, ventricular system abnormalities, vascular system abnormalities, intracranial lesions or pseudolesions, and finally neuroradiological emergencies. In order to minimize the possibility of error, it is important to be aware of various presentations of pathology, obtain clinical information, know current practice guidelines, review after interpreting a diagnostic study, suggest follow-up studies when appropriate, communicate significant abnormal findings appropriately and in a timely fashion directly with the treatment team.

  4. Uncorrected refractive errors.

    Science.gov (United States)

    Naidoo, Kovin S; Jaggernath, Jyoti

    2012-01-01

    Global estimates indicate that more than 2.3 billion people in the world suffer from poor vision due to refractive error; of which 670 million people are considered visually impaired because they do not have access to corrective treatment. Refractive errors, if uncorrected, results in an impaired quality of life for millions of people worldwide, irrespective of their age, sex and ethnicity. Over the past decade, a series of studies using a survey methodology, referred to as Refractive Error Study in Children (RESC), were performed in populations with different ethnic origins and cultural settings. These studies confirmed that the prevalence of uncorrected refractive errors is considerably high for children in low-and-middle-income countries. Furthermore, uncorrected refractive error has been noted to have extensive social and economic impacts, such as limiting educational and employment opportunities of economically active persons, healthy individuals and communities. The key public health challenges presented by uncorrected refractive errors, the leading cause of vision impairment across the world, require urgent attention. To address these issues, it is critical to focus on the development of human resources and sustainable methods of service delivery. This paper discusses three core pillars to addressing the challenges posed by uncorrected refractive errors: Human Resource (HR) Development, Service Development and Social Entrepreneurship.

  5. Preventing Errors in Laterality

    OpenAIRE

    Landau, Elliot; Hirschorn, David; Koutras, Iakovos; Malek, Alexander; Demissie, Seleshie

    2014-01-01

    An error in laterality is the reporting of a finding that is present on the right side as on the left or vice versa. While different medical and surgical specialties have implemented protocols to help prevent such errors, very few studies have been published that describe these errors in radiology reports and ways to prevent them. We devised a system that allows the radiologist to view reports in a separate window, displayed in a simple font and with all terms of laterality highlighted in sep...

  6. Disclosure of medical errors.

    Science.gov (United States)

    Matlow, Anne; Stevens, Polly; Harrison, Christine; Laxer, Ronald M

    2006-12-01

    The 1999 release of the Institute of Medicine's document To Err is Human was akin to removing the lid of Pandora's box. Not only were the magnitude and impact of medical errors now apparent to those working in the health care industry, but consumers or health care were alerted to the occurrence of medical events causing harm. One specific solution advocated was the disclosure to patients and their families of adverse events resulting from medical error. Knowledge of the historical perspective, ethical underpinnings, and medico-legal implications gives us a better appreciation of current recommendations for disclosing adverse events resulting from medical error to those affected.

  7. Medical Errors Reduction Initiative

    National Research Council Canada - National Science Library

    Mutter, Michael L

    2005-01-01

    The Valley Hospital of Ridgewood, New Jersey, is proposing to extend a limited but highly successful specimen management and medication administration medical errors reduction initiative on a hospital-wide basis...

  8. Rounding errors in weighing

    International Nuclear Information System (INIS)

    Jeach, J.L.

    1976-01-01

    When rounding error is large relative to weighing error, it cannot be ignored when estimating scale precision and bias from calibration data. Further, if the data grouping is coarse, rounding error is correlated with weighing error and may also have a mean quite different from zero. These facts are taken into account in a moment estimation method. A copy of the program listing for the MERDA program that provides moment estimates is available from the author. Experience suggests that if the data fall into four or more cells or groups, it is not necessary to apply the moment estimation method. Rather, the estimate given by equation (3) is valid in this instance. 5 tables

  9. Spotting software errors sooner

    International Nuclear Information System (INIS)

    Munro, D.

    1989-01-01

    Static analysis is helping to identify software errors at an earlier stage and more cheaply than conventional methods of testing. RTP Software's MALPAS system also has the ability to check that a code conforms to its original specification. (author)

  10. Error Reporting Logic

    National Research Council Canada - National Science Library

    Jaspan, Ciera; Quan, Trisha; Aldrich, Jonathan

    2008-01-01

    ... it. In this paper, we introduce error reporting logic (ERL), an algorithm and tool that produces succinct explanations for why a target system violates a specification expressed in first order predicate logic...

  11. Pedal Application Errors

    Science.gov (United States)

    2012-03-01

    This project examined the prevalence of pedal application errors and the driver, vehicle, roadway and/or environmental characteristics associated with pedal misapplication crashes based on a literature review, analysis of news media reports, a panel ...

  12. Environment compendium 1999. The environment in figures

    International Nuclear Information System (INIS)

    1999-01-01

    The detailed information in this compendium forms the basis for the condition of the environment in the Netherlands and for measures to be taken to stabilize or improve the environmental quality. First, an overview is given of the social developments, e.g. economic and volume developments within target sectors (section A), the use of natural resources (section B) and the resulting environmental pressure (section C). The environmental load is described according to the environmental themes and the target groups as formulated and distinguished in the Dutch environmental policy. Next, the environmental quality is described (section D), effected by the continuous emission of materials into the air, surface water, ground water and soil. Also attention is paid to noise pollution and odor pollution, the impacts on the external safety and ionizing radiation of radioactive materials. The final effects on nature and public health are dealt with in section E. The costs of environmental measures to be taken by the Dutch government and businesses to stabilize or improve the environmental quality are dealt with in section F. Finally, in section G, attention is paid to the relation and integration of environment and economy, based on the system of National Accounts (so-called NAMEA). refs

  13. Environment compendium 2001. The environment in figures

    International Nuclear Information System (INIS)

    2001-01-01

    The detailed information in this compendium forms the basis for the condition of the environment in the Netherlands and for measures to be taken to stabilize or improve the environmental quality. First, an overview is given of the social developments, e.g. economic and volume developments within target sectors (section A), the use of natural resources (section B) and the resulting environmental pressure (section C). The environmental load is described according to the environmental themes and the target groups as formulated and distinguished in the Dutch environmental policy (section D). Next, the environmental quality is described (section E), effected by the continuous emission of materials into the air, surface water, ground water and soil. Also attention is paid to noise pollution and odor pollution, the impacts on the external safety and ionizing radiation of radioactive materials. The final effects on nature and public health are dealt with in section F. The costs of environmental measures to be taken by the Dutch government and businesses to stabilize or improve the environmental quality are dealt with in section G. Finally, in section H, attention is paid to the relation and integration of environment and economy, based on the system of National Accounts (so-called NAMEA). refs

  14. Design for Error Tolerance

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1983-01-01

    An important aspect of the optimal design of computer-based operator support systems is the sensitivity of such systems to operator errors. The author discusses how a system might allow for human variability with the use of reversibility and observability.......An important aspect of the optimal design of computer-based operator support systems is the sensitivity of such systems to operator errors. The author discusses how a system might allow for human variability with the use of reversibility and observability....

  15. [The formative background of the philosophy on division of the human body circumference based on the figure of Taisu's Nine Zones and Eight Winds].

    Science.gov (United States)

    Son, Kizen

    2011-11-01

    The figure of Nine Zone and Eight Winds is the only figure in Huangdi Neijing·Taisu. Recording in Lingshu·Jiuzhenlun identifies the origin of the division of the human body circumference. The human body division theory was consistent with archaeological discoveries of Shengui (sacred turtle) divinations and Renzitu (herringbone figure). By matching organs, and body surface with Ba Fang (eight directions), Ba Jie (eight solar terms) and Ba Feng (eight kinds of winds from eight directions), the figure of Nine Zone and Eight Winds connected time, space and human body, and the framework of the theory of the human body formed.

  16. Inpatients’ medical prescription errors

    Directory of Open Access Journals (Sweden)

    Aline Melo Santos Silva

    2009-09-01

    Full Text Available Objective: To identify and quantify the most frequent prescription errors in inpatients’ medical prescriptions. Methods: A survey of prescription errors was performed in the inpatients’ medical prescriptions, from July 2008 to May 2009 for eight hours a day. Rresults: At total of 3,931 prescriptions was analyzed and 362 (9.2% prescription errors were found, which involved the healthcare team as a whole. Among the 16 types of errors detected in prescription, the most frequent occurrences were lack of information, such as dose (66 cases, 18.2% and administration route (26 cases, 7.2%; 45 cases (12.4% of wrong transcriptions to the information system; 30 cases (8.3% of duplicate drugs; doses higher than recommended (24 events, 6.6% and 29 cases (8.0% of prescriptions with indication but not specifying allergy. Cconclusion: Medication errors are a reality at hospitals. All healthcare professionals are responsible for the identification and prevention of these errors, each one in his/her own area. The pharmacist is an essential professional in the drug therapy process. All hospital organizations need a pharmacist team responsible for medical prescription analyses before preparation, dispensation and administration of drugs to inpatients. This study showed that the pharmacist improves the inpatient’s safety and success of prescribed therapy.

  17. Automatic Extraction of Figures from Scientific Publications in High-Energy Physics

    Directory of Open Access Journals (Sweden)

    Piotr Adam Praczyk

    2013-12-01

    Full Text Available Plots and figures play an important role in the process of understanding a scientificpublication, providing overviews of large amounts of data or ideas that are difficult to in-tuitively present using only the text. State of art in digital libraries, serving as gatewaysto knowledge encoded in scholarly writings, does not take full advantage of the graphicalcontent of documents. Enabling machines to automatically unlock the meaning of scien-tific illustrations would allow immense improvements in the way scientists work and theknowledge is being processed.    In this paper we present a novel solution for the initial problem of processing graphicalcontent, obtaining figures from scholarly publications stored in PDF format. Our methodrelies on vector properties of documents and as such, does not introduce additional errors,characteristic for methods based on raster image processing. Emphasis has been placed oncorrectly processing documents in High Energy Physics. The described approach makesdistinction between different classes of objects appearing in PDF documents and usesspatial clustering techniques to group objects into larger logical entities. A number ofheuristics allow the rejection of incorrect figure candidates and the extraction of differenttypes of metadata.

  18. Surface topography measurements over the 1 meter to 10 micrometer spatial period bandwidth

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Furenlid, K.; DeBiasse, R.A.; Church, E.L.

    1989-09-01

    A recently-developed long-trace surface profiling instrument (LTP) is now in operation in our laboratory measuring surface profiles on grazing incidence aspheres and also conventional optical surface. The LTP characterizes surface height profiles in a non-contact manner over spatial periods ranging from 1 meter (the maximum scan length) to 2 mm (the Nyquist period for 1 mm sampling period) and complements the range of our WYKO NCP-1000 2.5X surface roughness profiler (5 mm to 9.8 μm). Using these two instruments, we can fully characterize both figure and finish of an optical surface in the same way that we normally characterize surface finish, e.g., by means of the power spectral density function in the spatial frequency domain. A great deal of information about the distribution of figure errors over various spatial frequency ranges is available from this data, which is useful for process control and predicting performance at the desired wavelength and incidence angle. In addition, the LTP is able to measure the absolute radius of curvature on long-radius optics with high precision and accuracy. Angular errors in the optical head are measured in real time by an electronic autocollimator as the head traverses the linear air bearing slide. Measurements of kilometer radius optics can be made very quickly and the data analyzed in a format that is very easy to understand. 17 refs., 10 figs

  19. Human error in aviation operations

    Science.gov (United States)

    Nagel, David C.

    1988-01-01

    The role of human error in commercial and general aviation accidents and the techniques used to evaluate it are reviewed from a human-factors perspective. Topics addressed include the general decline in accidents per million departures since the 1960s, the increase in the proportion of accidents due to human error, methods for studying error, theoretical error models, and the design of error-resistant systems. Consideration is given to information acquisition and processing errors, visually guided flight, disorientation, instrument-assisted guidance, communication errors, decision errors, debiasing, and action errors.

  20. Error monitoring in musicians

    Directory of Open Access Journals (Sweden)

    Clemens eMaidhof

    2013-07-01

    Full Text Available To err is human, and hence even professional musicians make errors occasionally during their performances. This paper summarizes recent work investigating error monitoring in musicians, i.e. the processes and their neural correlates associated with the monitoring of ongoing actions and the detection of deviations from intended sounds. EEG Studies reported an early component of the event-related potential (ERP occurring before the onsets of pitch errors. This component, which can be altered in musicians with focal dystonia, likely reflects processes of error detection and/or error compensation, i.e. attempts to cancel the undesired sensory consequence (a wrong tone a musician is about to perceive. Thus, auditory feedback seems not to be a prerequisite for error detection, consistent with previous behavioral results. In contrast, when auditory feedback is externally manipulated and thus unexpected, motor performance can be severely distorted, although not all feedback alterations result in performance impairments. Recent studies investigating the neural correlates of feedback processing showed that unexpected feedback elicits an ERP component after note onsets, which shows larger amplitudes during music performance than during mere perception of the same musical sequences. Hence, these results stress the role of motor actions for the processing of auditory information. Furthermore, recent methodological advances like the combination of 3D motion capture techniques with EEG will be discussed. Such combinations of different measures can potentially help to disentangle the roles of different feedback types such as proprioceptive and auditory feedback, and in general to derive at a better understanding of the complex interactions between the motor and auditory domain during error monitoring. Finally, outstanding questions and future directions in this context will be discussed.

  1. Pediatric antidepressant medication errors in a national error reporting database.

    Science.gov (United States)

    Rinke, Michael L; Bundy, David G; Shore, Andrew D; Colantuoni, Elizabeth; Morlock, Laura L; Miller, Marlene R

    2010-01-01

    To describe inpatient and outpatient pediatric antidepressant medication errors. We analyzed all error reports from the United States Pharmacopeia MEDMARX database, from 2003 to 2006, involving antidepressant medications and patients younger than 18 years. Of the 451 error reports identified, 95% reached the patient, 6.4% reached the patient and necessitated increased monitoring and/or treatment, and 77% involved medications being used off label. Thirty-three percent of errors cited administering as the macrolevel cause of the error, 30% cited dispensing, 28% cited transcribing, and 7.9% cited prescribing. The most commonly cited medications were sertraline (20%), bupropion (19%), fluoxetine (15%), and trazodone (11%). We found no statistically significant association between medication and reported patient harm; harmful errors involved significantly more administering errors (59% vs 32%, p = .023), errors occurring in inpatient care (93% vs 68%, p = .012) and extra doses of medication (31% vs 10%, p = .025) compared with nonharmful errors. Outpatient errors involved significantly more dispensing errors (p errors due to inaccurate or omitted transcription (p errors. Family notification of medication errors was reported in only 12% of errors. Pediatric antidepressant errors often reach patients, frequently involve off-label use of medications, and occur with varying severity and type depending on location and type of medication prescribed. Education and research should be directed toward prompt medication error disclosure and targeted error reduction strategies for specific medication types and settings.

  2. Self-Esteem and Children's Human Figure Drawings

    Science.gov (United States)

    Dalby, J. Thomas; Vale, Helen L.

    1977-01-01

    One hundred and fifteen students in Grade 5 made human figure drawings which were compared with their scores on the Coopersmith Self-esteem Inventory and on teachers' ratings of the students' self-esteem. (Author)

  3. R&D figures 'distorted' by defence spending

    CERN Multimedia

    Coghlan, A

    1990-01-01

    A report published by the House of Lords Select Committee on Science and Technology, claims that government figures for R&D spending are misleading. They apparently include military projects that are more concerned with product development than original research.

  4. Spinal Cord Injury: Facts and Figures at a Glance

    Science.gov (United States)

    Spinal Cord Injury Facts and Figures at a Glance https://www.nscisc.uab.edu February 2012 This is a publication of the National Spinal Cord Injury Statistical Center, Birmingham, Alabama. I ncidence : It is ...

  5. Figures6&7_Tables2&3

    Data.gov (United States)

    U.S. Environmental Protection Agency — This file contains three netCDF formatted files containing simulation model results used to produce Figures 6 and 7 and tables 3 and 4. These data can be accessed...

  6. [Effective English writing for tables and figures in andrological papers].

    Science.gov (United States)

    Luo, Yong-He; Lu, Jin-Chun

    2012-08-01

    Tables and figures play a critical role in enhancing the quality of an andrological paper. As visual elements, well-presented tables and figures can reduce the length of the manuscript and meanwhile efficiently capture a large amount of information by clear and concise display of detailed results and complex relationships, patterns and trends, offer explicit statistical or graphical support to important ideas, and add to the value of the whole paper. The effectiveness of a table or figure lies not only in its well-crafted structural design, but even more in its language presentation. This article presents some essential and practical guidelines to effective English writing of the title, body and footnotes of tables and figures in andrological papers.

  7. Rumsey and Walker_AMT_2016_Figure 1.xlsx

    Data.gov (United States)

    U.S. Environmental Protection Agency — Figure summarizes diurnal profiles of uncertainty in the chemical gradient and transfer velocity measurements from which fluxes are calculated. This dataset is...

  8. Learning from Errors

    Directory of Open Access Journals (Sweden)

    MA. Lendita Kryeziu

    2015-06-01

    Full Text Available “Errare humanum est”, a well known and widespread Latin proverb which states that: to err is human, and that people make mistakes all the time. However, what counts is that people must learn from mistakes. On these grounds Steve Jobs stated: “Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations.” Similarly, in learning new language, learners make mistakes, thus it is important to accept them, learn from them, discover the reason why they make them, improve and move on. The significance of studying errors is described by Corder as: “There have always been two justifications proposed for the study of learners' errors: the pedagogical justification, namely that a good understanding of the nature of error is necessary before a systematic means of eradicating them could be found, and the theoretical justification, which claims that a study of learners' errors is part of the systematic study of the learners' language which is itself necessary to an understanding of the process of second language acquisition” (Corder, 1982; 1. Thus the importance and the aim of this paper is analyzing errors in the process of second language acquisition and the way we teachers can benefit from mistakes to help students improve themselves while giving the proper feedback.

  9. Brand logo design: Examining consumer responses to figurativeness

    OpenAIRE

    Machado, J. C.; Vacas-Carvalho, Leonor; Costa, P.; Torres, A.

    2013-01-01

    In a previous investigation, aimed at studying brand identity preferences in a merger context, researchers found the most preferred logos are figurative ones. Additionally, results suggested the aesthetic appeal of the logo significantly influences consumers’ identity choices. These results find support in logo strategy literature. The main purpose of this study is to investigate more thoroughly the influence of logo design characteristics, and particularly of figurativeness, o...

  10. Fast figuring of large optics by reactive atom plasma

    OpenAIRE

    Castelli, Marco; Jourdain, Renaud; Morantz, Paul; Shore, Paul

    2012-01-01

    The next generation of ground-based astronomical observatories will require fabrication and maintenance of extremely large segmented mirrors tens of meters in diameter. At present, the large production of segments required by projects like E-ELT and TMT poses time frames and costs feasibility questions. This is principally due to a bottleneck stage in the optical fabrication chain: the final figuring step. State-of-the-art figure correction techniques, so far, have failed to meet the needs of...

  11. An Overview of Human Figure Modeling for Army Aviation Systems

    Science.gov (United States)

    2010-04-01

    space reach and vision analyses, while others are used to examine biomechanics or strength issues, for example. Still other human figure modeling... levers (ECLs) located on the side console panel. Figure 9 shows a large male with insufficient knee clearance at the lower section of the instrument...Measuring Machine CMWS Common Missile Warning System ECL Engine Control Lever FOV Field of View GMC Ground Movement Control HFE Human

  12. Figurativeness in the Sense of Distraction (Studies by Lithuanian Authors

    Directory of Open Access Journals (Sweden)

    Laimutė Monginaitė

    2017-04-01

    Full Text Available The phenomenon of the sense of distraction and the feature of figurativeness in it are analysed with the help of phenomenological description, the concept of sense of Juozas Mureika and the conception of imagination of Kristupas Sabolius. The position is followed that the acts of sense and the being of those existing found in them cannot be known in a purely rational way. Knowing is reached with intuitive insights. The experiencing of distraction is approached as one of the norms or intentions of consciousness. The sense of distraction is acknowledged to be a basic value becoming more and more important in a modern stressful life. The article indicates that the intentional beings of the sense of distraction are expressed in really various human activities and are distinguished with mono-subjectivity and unrepeatable feeling. Figurativeness is perceived as the result of imaginary, creative activity of the imagination and aesthetical quality. The peculiarities of the formation of figurativeness are revealed through the phenomenological description of imagination by Sabolius. Four features of the act of visualisation, determining the quality of figurativeness, are emphasized: intentionality, power of transformation, relation with emotions and the symbolism of the image. The conclusion is made that figurativeness, being the result of the creative act (visualisation of imagination, appears as aesthetical quality or the ensemble of qualities. Figurativeness sharpens the sense of distraction and calls the wave of new experiences.

  13. Calculating SPRT Interpolation Error

    Science.gov (United States)

    Filipe, E.; Gentil, S.; Lóio, I.; Bosma, R.; Peruzzi, A.

    2018-02-01

    Interpolation error is a major source of uncertainty in the calibration of standard platinum resistance thermometer (SPRT) in the subranges of the International Temperature Scale of 1990 (ITS-90). This interpolation error arises because the interpolation equations prescribed by the ITS-90 cannot perfectly accommodate all the SPRTs natural variations in the resistance-temperature behavior, and generates different forms of non-uniqueness. This paper investigates the type 3 non-uniqueness for fourteen SPRTs of five different manufacturers calibrated over the water-zinc subrange and demonstrates the use of the method of divided differences for calculating the interpolation error. The calculated maximum standard deviation of 0.25 mK (near 100°C) is similar to that observed in previous studies.

  14. Data error effects on net radiation and evapotranspiration estimation

    International Nuclear Information System (INIS)

    Llasat, M.C.; Snyder, R.L.

    1998-01-01

    The objective of this paper is to evaluate the potential error in estimating the net radiation and reference evapotranspiration resulting from errors in the measurement or estimation of weather parameters. A methodology for estimating the net radiation using hourly weather variables measured at a typical agrometeorological station (e.g., solar radiation, temperature and relative humidity) is presented. Then the error propagation analysis is made for net radiation and for reference evapotranspiration. Data from the Raimat weather station, which is located in the Catalonia region of Spain, are used to illustrate the error relationships. The results show that temperature, relative humidity and cloud cover errors have little effect on the net radiation or reference evapotranspiration. A 5°C error in estimating surface temperature leads to errors as big as 30 W m −2 at high temperature. A 4% solar radiation (R s ) error can cause a net radiation error as big as 26 W m −2 when R s ≈ 1000 W m −2 . However, the error is less when cloud cover is calculated as a function of the solar radiation. The absolute error in reference evapotranspiration (ET o ) equals the product of the net radiation error and the radiation term weighting factor [W = Δ(Δ1+γ)] in the ET o equation. Therefore, the ET o error varies between 65 and 85% of the R n error as air temperature increases from about 20° to 40°C. (author)

  15. Errors in Neonatology

    Directory of Open Access Journals (Sweden)

    Antonio Boldrini

    2013-06-01

    Full Text Available Introduction: Danger and errors are inherent in human activities. In medical practice errors can lean to adverse events for patients. Mass media echo the whole scenario. Methods: We reviewed recent published papers in PubMed database to focus on the evidence and management of errors in medical practice in general and in Neonatology in particular. We compared the results of the literature with our specific experience in Nina Simulation Centre (Pisa, Italy. Results: In Neonatology the main error domains are: medication and total parenteral nutrition, resuscitation and respiratory care, invasive procedures, nosocomial infections, patient identification, diagnostics. Risk factors include patients’ size, prematurity, vulnerability and underlying disease conditions but also multidisciplinary teams, working conditions providing fatigue, a large variety of treatment and investigative modalities needed. Discussion and Conclusions: In our opinion, it is hardly possible to change the human beings but it is likely possible to change the conditions under they work. Voluntary errors report systems can help in preventing adverse events. Education and re-training by means of simulation can be an effective strategy too. In Pisa (Italy Nina (ceNtro di FormazIone e SimulazioNe NeonAtale is a simulation center that offers the possibility of a continuous retraining for technical and non-technical skills to optimize neonatological care strategies. Furthermore, we have been working on a novel skill trainer for mechanical ventilation (MEchatronic REspiratory System SImulator for Neonatal Applications, MERESSINA. Finally, in our opinion national health policy indirectly influences risk for errors. Proceedings of the 9th International Workshop on Neonatology · Cagliari (Italy · October 23rd-26th, 2013 · Learned lessons, changing practice and cutting-edge research

  16. LIBERTARISMO & ERROR CATEGORIAL

    Directory of Open Access Journals (Sweden)

    Carlos G. Patarroyo G.

    2009-01-01

    Full Text Available En este artículo se ofrece una defensa del libertarismo frente a dos acusaciones según las cuales éste comete un error categorial. Para ello, se utiliza la filosofía de Gilbert Ryle como herramienta para explicar las razones que fundamentan estas acusaciones y para mostrar por qué, pese a que ciertas versiones del libertarismo que acuden a la causalidad de agentes o al dualismo cartesiano cometen estos errores, un libertarismo que busque en el indeterminismo fisicalista la base de la posibilidad de la libertad humana no necesariamente puede ser acusado de incurrir en ellos.

  17. Well Construction Details, Groundwater Elevations, and Figures for the Tijeras Arroyo Groundwater Area at Sandia National Laboratories, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Copland, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-01-01

    This Sandia National Laboratories / New Mexico (SNL/NM) submittal contains groundwater information that the United States Geological Survey (USGS) has requested. The USGS will use the information to assist Kirtland Air Force Base (KAFB) in its ongoing groundwater studies. The information in this submittal contains well-construction details and groundwater-elevation data for monitoring wells that SNL/NM has installed. Relevant well-construction data from other government agencies are also summarized. This submittal contains four data tables and three figures. Information in the tables has been used by SNL/NM to prepare groundwater compliance reports that have previously incorporated the three figures. The figures depict the potentiometric surface for the Perched Groundwater System, the potentiometric surface for the Regional Aquifer, and a Conceptual Site Model for the vicinity of Tijeras Arroyo in the northern portion of KAFB.

  18. Error management in audit firms: Error climate, type, and originator

    NARCIS (Netherlands)

    Gold, A.H.; Gronewold, U.; Salterio, S.E.

    2014-01-01

    This paper examines how the treatment of audit staff who discover errors in audit files by superiors affects their willingness to report these errors. The way staff are treated by superiors is labelled as the audit office error management climate. In a "blame-oriented" climate errors are not

  19. Error tolerance: an evaluation of residents' repeated motor coordination errors.

    Science.gov (United States)

    Law, Katherine E; Gwillim, Eran C; Ray, Rebecca D; D'Angelo, Anne-Lise D; Cohen, Elaine R; Fiers, Rebekah M; Rutherford, Drew N; Pugh, Carla M

    2016-10-01

    The study investigates the relationship between motor coordination errors and total errors using a human factors framework. We hypothesize motor coordination errors will correlate with total errors and provide validity evidence for error tolerance as a performance metric. Residents' laparoscopic skills were evaluated during a simulated laparoscopic ventral hernia repair for motor coordination errors when grasping for intra-abdominal mesh or suture. Tolerance was defined as repeated, failed attempts to correct an error and the time required to recover. Residents (N = 20) committed an average of 15.45 (standard deviation [SD] = 4.61) errors and 1.70 (SD = 2.25) motor coordination errors during mesh placement. Total errors correlated with motor coordination errors (r[18] = .572, P = .008). On average, residents required 5.09 recovery attempts for 1 motor coordination error (SD = 3.15). Recovery approaches correlated to total error load (r[13] = .592, P = .02). Residents' motor coordination errors and recovery approaches predict total error load. Error tolerance proved to be a valid assessment metric relating to overall performance. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Error Correcting Codes -34 ...

    Indian Academy of Sciences (India)

    Science, Bangalore. Her interests are in. Theoretical Computer. Science. SERIES I ARTICLE. Error Correcting Codes. 2. The Hamming Codes. Priti Shankar. In the first article of this series we showed how redundancy introduced into a message transmitted over a noisy channel could improve the reliability of transmission. In.

  1. Error Correcting Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Error Correcting Codes - Reed Solomon Codes. Priti Shankar. Series Article Volume 2 Issue 3 March 1997 pp 33-47. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/002/03/0033-0047 ...

  2. Error Correcting Codes

    Indian Academy of Sciences (India)

    focused pictures of Triton, Neptune's largest moon. This great feat was in no small measure due to the fact that the sophisticated communication system on Voyager had an elaborate error correcting scheme built into it. At Jupiter and Saturn, a convolutional code was used to enhance the reliability of transmission, and at ...

  3. Error Correcting Codes

    Indian Academy of Sciences (India)

    It was engineering on the grand scale. - the use of new material for .... ROAD REPAIRSCE!STOP}!TL.,ZBFALK where errors occur in both the message as well as the check symbols, the decoder would be able to correct all of these (as there are not more than 8 .... before it is conveyed to the master disc. Modulation caters for.

  4. Error Correcting Codes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Error Correcting Codes - Reed Solomon Codes. Priti Shankar. Series Article Volume 2 Issue 3 March ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India ...

  5. Error Correcting Codes

    Indian Academy of Sciences (India)

    sound quality is, in essence, obtained by accurate waveform coding and decoding of the audio signals. In addition, the coded audio information is protected against disc errors by the use of a Cross Interleaved Reed-Solomon Code (CIRC). Reed-. Solomon codes were discovered by Irving Reed and Gus Solomon in 1960.

  6. Errors and ozone measurement

    Science.gov (United States)

    Mcpeters, Richard D.; Gleason, James F.

    1993-01-01

    It is held that Mimm's (1993) comparison of hand-held TOPS instrument data with the Nimbus 7 satellite's Total Ozone Mapping Spectrometer's (TOMS) ozone data was intrinsically flawed, in that the TOMS data were preliminary and therefore unsuited for quantitative analysis. It is noted that the TOMS calibration was in error.

  7. Random errors revisited

    DEFF Research Database (Denmark)

    Jacobsen, Finn

    2000-01-01

    It is well known that the random errors of sound intensity estimates can be much larger than the theoretical minimum value determined by the BT-product, in particular under reverberant conditions and when there are several sources present. More than ten years ago it was shown that one can predict...

  8. Team errors: definition and taxonomy

    International Nuclear Information System (INIS)

    Sasou, Kunihide; Reason, James

    1999-01-01

    In error analysis or error management, the focus is usually upon individuals who have made errors. In large complex systems, however, most people work in teams or groups. Considering this working environment, insufficient emphasis has been given to 'team errors'. This paper discusses the definition of team errors and its taxonomy. These notions are also applied to events that have occurred in the nuclear power industry, aviation industry and shipping industry. The paper also discusses the relations between team errors and Performance Shaping Factors (PSFs). As a result, the proposed definition and taxonomy are found to be useful in categorizing team errors. The analysis also reveals that deficiencies in communication, resource/task management, excessive authority gradient, excessive professional courtesy will cause team errors. Handling human errors as team errors provides an opportunity to reduce human errors

  9. Full text and figure display improves bioscience literature search.

    Directory of Open Access Journals (Sweden)

    Anna Divoli

    Full Text Available When reading bioscience journal articles, many researchers focus attention on the figures and their captions. This observation led to the development of the BioText literature search engine, a freely available Web-based application that allows biologists to search over the contents of Open Access Journals, and see figures from the articles displayed directly in the search results. This article presents a qualitative assessment of this system in the form of a usability study with 20 biologist participants using and commenting on the system. 19 out of 20 participants expressed a desire to use a bioscience literature search engine that displays articles' figures alongside the full text search results. 15 out of 20 participants said they would use a caption search and figure display interface either frequently or sometimes, while 4 said rarely and 1 said undecided. 10 out of 20 participants said they would use a tool for searching the text of tables and their captions either frequently or sometimes, while 7 said they would use it rarely if at all, 2 said they would never use it, and 1 was undecided. This study found evidence, supporting results of an earlier study, that bioscience literature search systems such as PubMed should show figures from articles alongside search results. It also found evidence that full text and captions should be searched along with the article title, metadata, and abstract. Finally, for a subset of users and information needs, allowing for explicit search within captions for figures and tables is a useful function, but it is not entirely clear how to cleanly integrate this within a more general literature search interface. Such a facility supports Open Access publishing efforts, as it requires access to full text of documents and the lifting of restrictions in order to show figures in the search interface.

  10. Quantitative analysis of error mode, error effect and criticality

    International Nuclear Information System (INIS)

    Li Pengcheng; Zhang Li; Xiao Dongsheng; Chen Guohua

    2009-01-01

    The quantitative method of human error mode, effect and criticality is developed in order to reach the ultimate goal of Probabilistic Safety Assessment. The criticality identification matrix of human error mode and task is built to identify the critical human error mode and task and the critical organizational root causes on the basis of the identification of human error probability, error effect probability and the criticality index of error effect. Therefore, this will be beneficial to take targeted measures to reduce and prevent the occurrence of critical human error mode and task. Finally, the application of the technique is explained through the application example. (authors)

  11. Inborn Errors of Metabolism.

    Science.gov (United States)

    Ezgu, Fatih

    2016-01-01

    Inborn errors of metabolism are single gene disorders resulting from the defects in the biochemical pathways of the body. Although these disorders are individually rare, collectively they account for a significant portion of childhood disability and deaths. Most of the disorders are inherited as autosomal recessive whereas autosomal dominant and X-linked disorders are also present. The clinical signs and symptoms arise from the accumulation of the toxic substrate, deficiency of the product, or both. Depending on the residual activity of the deficient enzyme, the initiation of the clinical picture may vary starting from the newborn period up until adulthood. Hundreds of disorders have been described until now and there has been a considerable clinical overlap between certain inborn errors. Resulting from this fact, the definite diagnosis of inborn errors depends on enzyme assays or genetic tests. Especially during the recent years, significant achievements have been gained for the biochemical and genetic diagnosis of inborn errors. Techniques such as tandem mass spectrometry and gas chromatography for biochemical diagnosis and microarrays and next-generation sequencing for the genetic diagnosis have enabled rapid and accurate diagnosis. The achievements for the diagnosis also enabled newborn screening and prenatal diagnosis. Parallel to the development the diagnostic methods; significant progress has also been obtained for the treatment. Treatment approaches such as special diets, enzyme replacement therapy, substrate inhibition, and organ transplantation have been widely used. It is obvious that by the help of the preclinical and clinical research carried out for inborn errors, better diagnostic methods and better treatment approaches will high likely be available. © 2016 Elsevier Inc. All rights reserved.

  12. Figuring large optics at the sub-nanometer level: compensation for coating and gravity distortions.

    Science.gov (United States)

    Gensemer, Stephen; Gross, Mark

    2015-11-30

    Large, precision optics can now be manufactured with surface figures specified at the sub-nanometer level. However, coatings and gravity deform large optics, and there are limits to what can be corrected by clever compensation. Instead, deformations caused by stress from optical mounts and deposited coatings must be incorporated into the optical design. We demonstrate compensation of coating stress on a 370mm substrate to λ/200 by a process of coating and annealing. We also model the same process and identify the leading effects that must be anticipated in fabrication of optics for future gravitational wave detectors and other applications of large, precisely figured optics, and identify the limitations inherent in using coatings to compensate for these deformations.

  13. Large thermoelectric figure of merit in graphene layered devices at low temperature

    Science.gov (United States)

    Olaya, Daniel; Hurtado-Morales, Mikel; Gómez, Daniel; Alejandro Castañeda-Uribe, Octavio; Juang, Zhen-Yu; Hernández, Yenny

    2018-01-01

    Nanostructured materials have emerged as an alternative to enhance the figure of merit (ZT) of thermoelectric (TE) devices. Graphene exhibits a high electrical conductivity (in-plane) that is necessary for a high ZT; however, this effect is countered by its impressive thermal conductivity. In this work TE layered devices composed of electrochemically exfoliated graphene (EEG) and a phonon blocking material such as poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), polyaniline (PANI) and gold nanoparticles (AuNPs) at the interface were prepared. The figure of merit, ZT, of each device was measured in the cross-plane direction using the Transient Harman Method (THM) and complemented with AFM-based measurements. The results show remarkable high ZT values (0.81  <  ZT  <  2.45) that are directly related with the topography, surface potential, capacitance gradient and resistance of the devices at the nanoscale.

  14. Learning to rank figures within a biomedical article.

    Directory of Open Access Journals (Sweden)

    Feifan Liu

    Full Text Available Hundreds of millions of figures are available in biomedical literature, representing important biomedical experimental evidence. This ever-increasing sheer volume has made it difficult for scientists to effectively and accurately access figures of their interest, the process of which is crucial for validating research facts and for formulating or testing novel research hypotheses. Current figure search applications can't fully meet this challenge as the "bag of figures" assumption doesn't take into account the relationship among figures. In our previous study, hundreds of biomedical researchers have annotated articles in which they serve as corresponding authors. They ranked each figure in their paper based on a figure's importance at their discretion, referred to as "figure ranking". Using this collection of annotated data, we investigated computational approaches to automatically rank figures. We exploited and extended the state-of-the-art listwise learning-to-rank algorithms and developed a new supervised-learning model BioFigRank. The cross-validation results show that BioFigRank yielded the best performance compared with other state-of-the-art computational models, and the greedy feature selection can further boost the ranking performance significantly. Furthermore, we carry out the evaluation by comparing BioFigRank with three-level competitive domain-specific human experts: (1 First Author, (2 Non-Author-In-Domain-Expert who is not the author nor co-author of an article but who works in the same field of the corresponding author of the article, and (3 Non-Author-Out-Domain-Expert who is not the author nor co-author of an article and who may or may not work in the same field of the corresponding author of an article. Our results show that BioFigRank outperforms Non-Author-Out-Domain-Expert and performs as well as Non-Author-In-Domain-Expert. Although BioFigRank underperforms First Author, since most biomedical researchers are either in- or

  15. Learning to rank figures within a biomedical article.

    Science.gov (United States)

    Liu, Feifan; Yu, Hong

    2014-01-01

    Hundreds of millions of figures are available in biomedical literature, representing important biomedical experimental evidence. This ever-increasing sheer volume has made it difficult for scientists to effectively and accurately access figures of their interest, the process of which is crucial for validating research facts and for formulating or testing novel research hypotheses. Current figure search applications can't fully meet this challenge as the "bag of figures" assumption doesn't take into account the relationship among figures. In our previous study, hundreds of biomedical researchers have annotated articles in which they serve as corresponding authors. They ranked each figure in their paper based on a figure's importance at their discretion, referred to as "figure ranking". Using this collection of annotated data, we investigated computational approaches to automatically rank figures. We exploited and extended the state-of-the-art listwise learning-to-rank algorithms and developed a new supervised-learning model BioFigRank. The cross-validation results show that BioFigRank yielded the best performance compared with other state-of-the-art computational models, and the greedy feature selection can further boost the ranking performance significantly. Furthermore, we carry out the evaluation by comparing BioFigRank with three-level competitive domain-specific human experts: (1) First Author, (2) Non-Author-In-Domain-Expert who is not the author nor co-author of an article but who works in the same field of the corresponding author of the article, and (3) Non-Author-Out-Domain-Expert who is not the author nor co-author of an article and who may or may not work in the same field of the corresponding author of an article. Our results show that BioFigRank outperforms Non-Author-Out-Domain-Expert and performs as well as Non-Author-In-Domain-Expert. Although BioFigRank underperforms First Author, since most biomedical researchers are either in- or out

  16. Automatic Error Analysis Using Intervals

    Science.gov (United States)

    Rothwell, E. J.; Cloud, M. J.

    2012-01-01

    A technique for automatic error analysis using interval mathematics is introduced. A comparison to standard error propagation methods shows that in cases involving complicated formulas, the interval approach gives comparable error estimates with much less effort. Several examples are considered, and numerical errors are computed using the INTLAB…

  17. Video Error Correction Using Steganography

    Directory of Open Access Journals (Sweden)

    Robie David L

    2002-01-01

    Full Text Available The transmission of any data is always subject to corruption due to errors, but video transmission, because of its real time nature must deal with these errors without retransmission of the corrupted data. The error can be handled using forward error correction in the encoder or error concealment techniques in the decoder. This MPEG-2 compliant codec uses data hiding to transmit error correction information and several error concealment techniques in the decoder. The decoder resynchronizes more quickly with fewer errors than traditional resynchronization techniques. It also allows for perfect recovery of differentially encoded DCT-DC components and motion vectors. This provides for a much higher quality picture in an error-prone environment while creating an almost imperceptible degradation of the picture in an error-free environment.

  18. Video Error Correction Using Steganography

    Science.gov (United States)

    Robie, David L.; Mersereau, Russell M.

    2002-12-01

    The transmission of any data is always subject to corruption due to errors, but video transmission, because of its real time nature must deal with these errors without retransmission of the corrupted data. The error can be handled using forward error correction in the encoder or error concealment techniques in the decoder. This MPEG-2 compliant codec uses data hiding to transmit error correction information and several error concealment techniques in the decoder. The decoder resynchronizes more quickly with fewer errors than traditional resynchronization techniques. It also allows for perfect recovery of differentially encoded DCT-DC components and motion vectors. This provides for a much higher quality picture in an error-prone environment while creating an almost imperceptible degradation of the picture in an error-free environment.

  19. Error reduction in surgical pathology.

    Science.gov (United States)

    Nakhleh, Raouf E

    2006-05-01

    Because of its complex nature, surgical pathology practice is inherently error prone. Currently, there is pressure to reduce errors in medicine, including pathology. To review factors that contribute to errors and to discuss error-reduction strategies. Literature review. Multiple factors contribute to errors in medicine, including variable input, complexity, inconsistency, tight coupling, human intervention, time constraints, and a hierarchical culture. Strategies that may reduce errors include reducing reliance on memory, improving information access, error-proofing processes, decreasing reliance on vigilance, standardizing tasks and language, reducing the number of handoffs, simplifying processes, adjusting work schedules and environment, providing adequate training, and placing the correct people in the correct jobs. Surgical pathology is a complex system with ample opportunity for error. Significant error reduction is unlikely to occur without a sustained comprehensive program of quality control and quality assurance. Incremental adoption of information technology and automation along with improved training in patient safety and quality management can help reduce errors.

  20. Figure drawing as an expression of self-esteem.

    Science.gov (United States)

    Coopersmith, S; Sakai, D; Beardslee, B; Coopersmith, A

    1976-08-01

    Figure drawings were obtained from 97 preadolescent males who differed in self and behavioral assessments of self-esteem. These subjects had been selected from a much larger sample and represented five different types of self-esteem. The figure drawings were scored for 15 variables, dealing with formal characteristics, content, and global-interpretations of the total drawings. Five significant differences were obtained, with the content and global-interpretative categories proving more differentiating between self-esteem groups than did the formal characteristics. Behavioral expressions of self-esteem were more associated with figure drawing characteristics than were subjective evaluations. Discussion focuses on the nature of self-concept and self-esteem in children as a sensorimotor rather than symbolic expression.

  1. Cutting solid figures by plane - analytical solution and spreadsheet implementation

    Science.gov (United States)

    Benacka, Jan

    2012-07-01

    In some secondary mathematics curricula, there is a topic called Stereometry that deals with investigating the position and finding the intersection, angle, and distance of lines and planes defined within a prism or pyramid. Coordinate system is not used. The metric tasks are solved using Pythagoras' theorem, trigonometric functions, and sine and cosine rules. The basic problem is to find the section of the figure by a plane that is defined by three points related to the figure. In this article, a formula is derived that gives the positions of the intersection points of such a plane and the figure edges, that is, the vertices of the section polygon. Spreadsheet implementations of the formula for cuboid and right rectangular pyramids are presented. The user can check his/her graphical solution, or proceed if he/she is not able to complete the section.

  2. Moessbauer study of a Western-Han dynasty pottery figure

    International Nuclear Information System (INIS)

    Zhou Yuan; Dai Kaimei; Liu Rongchuan; Xia Yuanfu; Jiang Zanchu

    1993-01-01

    A grey pottery figure manufactured in the Western-Han Dynasty and the clay gathered from the same site of Beidongshan near Suzhou, China, have been studied by X-ray diffraction, X-ray fluorescence and Moessbauer spectroscopy. They were simultaneously fired under the same conditions in different atmospheres at various temperatures. The information on original firing atmosphere and temperature as well as its provenance can be inferred from the method of pottery re-firing and clay firing. The original firing temperatures deduced from both of them are in good self-agreement. It is found that the values of Moessbauer parameters for the un-re-fired pottery figure are approximately the same as those for the clay fired at 950 deg C for five hours in a reduced atmosphere. The XRF analysis confirmed that the locality of this pottery figure was somewhere near Beidongshan

  3. World Literature and the Figurative Push to Sublimate Space

    Directory of Open Access Journals (Sweden)

    Christian Giguere

    2015-12-01

    Full Text Available This paper examines the influence of Aristotle’s theory of place (topos on the conceptualization of cultural universality. Its main focus is in reinvesting the thought of Baruch Spinoza and Henri Bergson surrounding the fossilized spatial boundaries that limit understanding in order to scrutinize both the virtual and figurative processes inherent to the sketching of a universal human plane outside of local custom in certain literary works. This investigation yields a concept of “figurative agency” that is then delineated in the Tao Te Ching and Stevenson’s The Strange Case of Dr. Jekyll and Mr. Hyde in order to demonstrate how the concept might serve as a bridge between the extended space of a national culture and the virtual plane invested by world literature.Keywords: world literature, Henri Bergson, Spinoza, figurative agency, The Strange Case of Dr. Jekyll and Mr. Hyde, Tao Te-Ching, literary epistemology

  4. Human Error In Complex Systems

    Science.gov (United States)

    Morris, Nancy M.; Rouse, William B.

    1991-01-01

    Report presents results of research aimed at understanding causes of human error in such complex systems as aircraft, nuclear powerplants, and chemical processing plants. Research considered both slips (errors of action) and mistakes (errors of intention), and influence of workload on them. Results indicated that: humans respond to conditions in which errors expected by attempting to reduce incidence of errors; and adaptation to conditions potent influence on human behavior in discretionary situations.

  5. Transition Models with Measurement Errors

    OpenAIRE

    Magnac, Thierry; Visser, Michael

    1999-01-01

    In this paper, we estimate a transition model that allows for measurement errors in the data. The measurement errors arise because the survey design is partly retrospective, so that individuals sometimes forget or misclassify their past labor market transitions. The observed data are adjusted for errors via a measurement-error mechanism. The parameters of the distribution of the true data, and those of the measurement-error mechanism are estimated by a two-stage method. The results, based on ...

  6. Energy management and renewable energies. Key figures for 2007

    International Nuclear Information System (INIS)

    2010-01-01

    After having recalled the different French, European and world objectives in terms of greenhouse gas emission reduction (globally or for different sectors: industry, housing and offices, transport, agriculture), and of renewable energy production and consumption, this document proposes data tables and figures describing the energy consumption evolution in France since 1970 (with respect to sectors as well as with respect to energy sources), the greenhouse gas emission evolution since 1990 and the share of each sector in these emissions. Other tables and figures give a more precise description of the housing sector, of the office buildings sector, of the transportation sector, of the manufacturing industry, and of renewable energies (production capacity, purchase tariffs)

  7. Goldmann tonometer error correcting prism: clinical evaluation

    Directory of Open Access Journals (Sweden)

    McCafferty S

    2017-05-01

    Full Text Available Sean McCafferty,1–3 Garrett Lim,2 William Duncan,2 Eniko T Enikov,4 Jim Schwiegerling,1 Jason Levine,1,3 Corin Kew3 1Department of Ophthalmology, College of Optical Science, University of Arizona, 2Intuor Technologies, 3Arizona Eye Consultants, 4Department of Aerospace and Mechanical, College of Engineering, University of Arizona, Tucson, AZ, USA Purpose: Clinically evaluate a modified applanating surface Goldmann tonometer prism designed to substantially negate errors due to patient variability in biomechanics.Methods: A modified Goldmann prism with a correcting applanation tonometry surface (CATS was mathematically optimized to minimize the intraocular pressure (IOP measurement error due to patient variability in corneal thickness, stiffness, curvature, and tear film adhesion force. A comparative clinical study of 109 eyes measured IOP with CATS and Goldmann prisms. The IOP measurement differences between the CATS and Goldmann prisms were correlated to corneal thickness, hysteresis, and curvature.Results: The CATS tonometer prism in correcting for Goldmann central corneal thickness (CCT error demonstrated a reduction to <±2 mmHg in 97% of a standard CCT population. This compares to only 54% with CCT error <±2 mmHg using the Goldmann prism. Equal reductions of ~50% in errors due to corneal rigidity and curvature were also demonstrated.Conclusion: The results validate the CATS prism’s improved accuracy and expected reduced sensitivity to Goldmann errors without IOP bias as predicted by mathematical modeling. The CATS replacement for the Goldmann prism does not change Goldmann measurement technique or interpretation. Keywords: glaucoma, tonometry, Goldmann, IOP, intraocular pressure, appalnation tonometer, corneal biomechanics, CATS tonometer, CCT, central corneal thickness, tonometer error 

  8. 3-D vision and figure-ground separation by visual cortex.

    Science.gov (United States)

    Grossberg, S

    1994-01-01

    A neural network theory of three-dimensional (3-D) vision, called FACADE theory, is described. The theory proposes a solution of the classical figure-ground problem for biological vision. It does so by suggesting how boundary representations and surface representations are formed within a boundary contour system (BCS) and a feature contour system (FCS). The BCS and FCS interact reciprocally to form 3-D boundary and surface representations that are mutually consistent. Their interactions generate 3-D percepts wherein occluding and occluded object parts are separated, completed, and grouped. The theory clarifies how preattentive processes of 3-D perception and figure-ground separation interact reciprocally with attentive processes of spatial localization, object recognition, and visual search. A new theory of stereopsis is proposed that predicts how cells sensitive to multiple spatial frequencies, disparities, and orientations are combined by context-sensitive filtering, competition, and cooperation to form coherent BCS boundary segmentations. Several factors contribute to figure-ground pop-out, including: boundary contrast between spatially contiguous boundaries, whether due to scenic differences in luminance, color, spatial frequency, or disparity; partially ordered interactions from larger spatial scales and disparities to smaller scales and disparities; and surface filling-in restricted to regions surrounded by a connected boundary. Phenomena such as 3-D pop-out from a 2-D picture, Da Vinci stereopsis, 3-D neon color spreading, completion of partially occluded objects, and figure-ground reversals are analyzed. The BCS and FCS subsystems model aspects of how the two parvocellular cortical processing streams that join the lateral geniculate nucleus to prestriate cortical area V4 interact to generate a multiplexed representation of Form-And-Color-And-DEpth, or FACADE, within area V4. Area V4 is suggested to support figure-ground separation and to interact with

  9. Reporting Self-Made Errors: The Impact of Organizational Error-Management Climate and Error Type

    NARCIS (Netherlands)

    Gold, A.H.; Gronewold, U.; Salterio, S.E.

    2013-01-01

    We study how an organization's error-management climate affects organizational members' beliefs about other members' willingness to report errors that they discover when chance of error detection by superiors and others is extremely low. An error-management climate, as a component of the

  10. Stochastic approach for round-off error analysis in computing application to signal processing algorithms

    International Nuclear Information System (INIS)

    Vignes, J.

    1986-01-01

    Any result of algorithms provided by a computer always contains an error resulting from floating-point arithmetic round-off error propagation. Furthermore signal processing algorithms are also generally performed with data containing errors. The permutation-perturbation method, also known under the name CESTAC (controle et estimation stochastique d'arrondi de calcul) is a very efficient practical method for evaluating these errors and consequently for estimating the exact significant decimal figures of any result of algorithms performed on a computer. The stochastic approach of this method, its probabilistic proof, and the perfect agreement between the theoretical and practical aspects are described in this paper [fr

  11. Diagnostic errors in pediatric radiology

    International Nuclear Information System (INIS)

    Taylor, George A.; Voss, Stephan D.; Melvin, Patrice R.; Graham, Dionne A.

    2011-01-01

    Little information is known about the frequency, types and causes of diagnostic errors in imaging children. Our goals were to describe the patterns and potential etiologies of diagnostic error in our subspecialty. We reviewed 265 cases with clinically significant diagnostic errors identified during a 10-year period. Errors were defined as a diagnosis that was delayed, wrong or missed; they were classified as perceptual, cognitive, system-related or unavoidable; and they were evaluated by imaging modality and level of training of the physician involved. We identified 484 specific errors in the 265 cases reviewed (mean:1.8 errors/case). Most discrepancies involved staff (45.5%). Two hundred fifty-eight individual cognitive errors were identified in 151 cases (mean = 1.7 errors/case). Of these, 83 cases (55%) had additional perceptual or system-related errors. One hundred sixty-five perceptual errors were identified in 165 cases. Of these, 68 cases (41%) also had cognitive or system-related errors. Fifty-four system-related errors were identified in 46 cases (mean = 1.2 errors/case) of which all were multi-factorial. Seven cases were unavoidable. Our study defines a taxonomy of diagnostic errors in a large academic pediatric radiology practice and suggests that most are multi-factorial in etiology. Further study is needed to define effective strategies for improvement. (orig.)

  12. Measuring the In-Process Figure, Final Prescription, and System Alignment of Large Optics and Segmented Mirrors Using Lidar Metrology

    Science.gov (United States)

    Ohl, Raymond; Slotwinski, Anthony; Eegholm, Bente; Saif, Babak

    2011-01-01

    The fabrication of large optics is traditionally a slow process, and fabrication capability is often limited by measurement capability. W hile techniques exist to measure mirror figure with nanometer precis ion, measurements of large-mirror prescription are typically limited to submillimeter accuracy. Using a lidar instrument enables one to measure the optical surface rough figure and prescription in virtuall y all phases of fabrication without moving the mirror from its polis hing setup. This technology improves the uncertainty of mirror presc ription measurement to the micron-regime.

  13. Analysis of moire figures using interferometric lattices with Airy perfils

    International Nuclear Information System (INIS)

    Rabal, H.J.; Garavaglia, M.

    1979-01-01

    Using a Fabry-Perot interferometer and a spectrograph, iluminated with white light, ondulatory spectra are obtained. The componentes are not equidistance among them and the intensity distribution obeys the Airy's law. It is been made preliminar experiments to determinate if the moire figures, generated by the ondulatory spectra interaction, allows to measure displacements, rotations, etc [es

  14. 49 CFR Appendix - Figures to Subpart N of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart N of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Six-year-old Child Test Dummy, Beta...

  15. 49 CFR Appendix - Figures to Subpart I of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart I of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 6-Year-Old Child Performance test...

  16. 49 CFR Appendix - Figures to Subpart C of Part 587

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart C of Part 587 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier Mounting. Pt. 587...

  17. 49 CFR Appendix - Figures to Subpart P of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart P of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy...

  18. 49 CFR Appendix - Figures to Subpart R of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart R of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES CRABI 12-Month-Old Infant, Alpha...

  19. 49 CFR Appendix - Part 238, Subpart C, Figure 1

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Part 238, Subpart C, Figure 1 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Specific Requirements for Tier I Passenger Equipment...

  20. 49 CFR Appendix - Figures to Subpart S of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart S of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III Six-Year-Old Weighted Child...

  1. 49 CFR Appendix - Figures to Subpart O of Part 572

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Figures to Subpart O of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III 5th Percentile Female Test...

  2. Judging Anomalies at the 2010 Olympics in Men's Figure Skating

    Science.gov (United States)

    Looney, Marilyn A.

    2012-01-01

    The purpose of this study was to determine if the 2010 Olympic figure skating judges had trouble scoring Plushenko and the transitions program component, and if the International Skating Union's (ISU) "corridor" method flagged the same judging anomalies as the Rasch analyses. A 3-facet (skater by program component by judge) Rasch rating…

  3. International Higher Education in Facts and Figures. Summer 2010

    Science.gov (United States)

    Universities UK, 2010

    2010-01-01

    This paper presents facts and figures of the international higher education. Facts reveal that the UK sells more brainpower per capita than anywhere else in the world. The UK has 1% of the world's population but undertakes 5% of the world's scientific research and produces 14% of the world's most highly cited papers (Universities UK 2010). More…

  4. Figures of Rhetoric in the Language of Nigerian Christian Sermons ...

    African Journals Online (AJOL)

    Sermons are regarded as an art that integrates scientific analysis, literature and imaginative composition (Vaessen, 1998). The Christian sermonic discourse is highly persuasive and relies on rhetorical figures and devices to achieve its goals of calling people to decisions and modification of behaviours and warning them of ...

  5. Deterministic figure correction of piezoelectrically adjustable slumped glass optics

    Science.gov (United States)

    DeRoo, Casey T.; Allured, Ryan; Cotroneo, Vincenzo; Hertz, Edward; Marquez, Vanessa; Reid, Paul B.; Schwartz, Eric D.; Vikhlinin, Alexey A.; Trolier-McKinstry, Susan; Walker, Julian; Jackson, Thomas N.; Liu, Tianning; Tendulkar, Mohit

    2018-01-01

    Thin x-ray optics with high angular resolution (≤ 0.5 arcsec) over a wide field of view enable the study of a number of astrophysically important topics and feature prominently in Lynx, a next-generation x-ray observatory concept currently under NASA study. In an effort to address this technology need, piezoelectrically adjustable, thin mirror segments capable of figure correction after mounting and on-orbit are under development. We report on the fabrication and characterization of an adjustable cylindrical slumped glass optic. This optic has realized 100% piezoelectric cell yield and employs lithographically patterned traces and anisotropic conductive film connections to address the piezoelectric cells. In addition, the measured responses of the piezoelectric cells are found to be in good agreement with finite-element analysis models. While the optic as manufactured is outside the range of absolute figure correction, simulated corrections using the measured responses of the piezoelectric cells are found to improve 5 to 10 arcsec mirrors to 1 to 3 arcsec [half-power diameter (HPD), single reflection at 1 keV]. Moreover, a measured relative figure change which would correct the figure of a representative slumped glass piece from 6.7 to 1.2 arcsec HPD is empirically demonstrated. We employ finite-element analysis-modeled influence functions to understand the current frequency limitations of the correction algorithm employed and identify a path toward achieving subarcsecond corrections.

  6. Graphics of polar figure; Graficado de figura polar

    Energy Technology Data Exchange (ETDEWEB)

    Macias B, L.R

    1991-11-15

    The objective of this work, is that starting from a data file coming from a spectra that has been softened, and of the one that have been generated its coordinates to project it in stereographic form, to create the corresponding polar figure making use of the Cyber computer of the ININ by means of the GRAPHOS package. This work only requires a Beta, Fi and Intensity (I) enter data file. It starts of the existence of a softened spectra of which have been generated already with these data, making use of some language that in this case was FORTRAN for the Cyber computer, a program is generated supported in the Graphos package that allows starting of a reading of the Beta, Fi, I file, to generate the points in a stereographic projection and that it culminates with the graph of the corresponding polar figure. The program will request the pertinent information that is wanted to capture in the polar figure just as: date, name of the enter file, indexes of the polar figure, number of levels, radio of the stereographic projection (cms.), crystalline system to which belongs the sample, name the neuter graph file by create and to add the own general data. (Author)

  7. Figure detection and part label extraction from patent drawing images

    CSIR Research Space (South Africa)

    Cronje, J

    2012-11-01

    Full Text Available by TopCoder.com, the largest competitive online software developer community. The challenge was to detect, segment and recognize figures, captions and part labels from patent drawing images. The solution presented in this work was the winning submission....

  8. Descriptive Analysis Of Nigerian Children Human Figure Drawings ...

    African Journals Online (AJOL)

    Art is a symbolic means of communication through which man can communicate his inner needs, desires and worries. Children find art a good means of communicating what ordinarily, they may not be able to describe orally. This study was on description of Nigerian children human figure art using Lowenfeld and Brittain ...

  9. The Figured Poem: Towards a Definition of Genre.

    Science.gov (United States)

    Ernst, Ulrich

    1986-01-01

    Presents a poetological analysis of the genre of pattern poetry that distinguishes among various forms of picture text composition and classifies the various sorts of carmina figurata typologically while dealing with the question of continuity of figured poems in ancient, medieval, and modern times. (FL)

  10. Comprehension and production of figurative language by Afrikaans ...

    African Journals Online (AJOL)

    This article reports on the comprehension and production of figurative language, namely idioms and similes, in first language Afrikaans-speaking (AFR) boys, ages eight to 10 years, and first language Afrikaans-speaking boys with specific language impairment (SLI), also ages eight to 10. It draws on a larger study by Van ...

  11. Maternal and perinatal mortality figures in 249 South African ...

    African Journals Online (AJOL)

    Objective. To detennine maternal and perinatal mortalrty ratios in a large number of South African hospitals and assess the differences in mortality figures among the main ethnic groups. Design. Questionnaire survey involving confidential reports on maternal and perinatal deaths submitted over the 5-year period 1988 ...

  12. Executive Functioning and Figurative Language Comprehension in Learning Disabilities

    Science.gov (United States)

    Bishara, Saied; Kaplan, Shani

    2016-01-01

    The goal of the research was to examine executive functioning and figurative language comprehension among students with learning disabilities as compared to students without learning disabilities. As part of the research, we examined 20 students with learning disabilities and 21 students with no learning disabilities, both groups of students…

  13. Higher Education in Facts & Figures: Research and Innovation

    Science.gov (United States)

    Universities UK, 2007

    2007-01-01

    This edition of Higher education in facts and figures focusses on Research and innovation. Research and innovation are crucial to the future of the UK's competitiveness. Universities are the prime drivers for this, both through producing, and acting as a magnet for, the best knowledge and talent. The UK's research performance is exceptionally…

  14. EU nurse figures in decline long before Brexit vote.

    Science.gov (United States)

    Mckew, Matthew

    2017-03-08

    The falling number of European Union (EU) nurses applying to work in the UK has been widely blamed on Brexit. But figures obtained by Nursing Standard reveal interest from EU nurses was waning months before the June 2016 referendum, a trend experts say could be due to tougher language requirements introduced by the Nursing and Midwifery Council (NMC).

  15. Figurative Expressions, a Spice of Literary Creativity: Echoes From ...

    African Journals Online (AJOL)

    There is no gainsaying the fact that figurative expressions are important in creative works of art. It is little wonder that literary writers employ these very significant expressions to articulate their ideas in special ways to give particular emphasis or sentiments which they use to communicate so as to beautify and spice up a ...

  16. Maternal and perinatal mortality figures in 249 South African ...

    African Journals Online (AJOL)

    the PMR for the black population is considerably hi9her than for the other ethnic groups. That said, perinatal mortality levels in South African blacks still compare favourably with figures from other African cQuntries.12. In conclusion, the MMRs and PMRs found in our survey of. 249 South African hospitals - though not truly.

  17. Fit assessment of slopers for women with disproportionate figures

    CSIR Research Space (South Africa)

    Zwane, PEL

    2005-10-01

    Full Text Available and hip) conform to those on the sizing charts, have a 25cm smaller waist than bust/hip) and varied back waist lengths (Defty , 1998, and Simmons et al, 2004). The other three figure types are regarded as disproportionate, and they rely on custom...

  18. Gérard Genette : a escrita de Figures IV

    OpenAIRE

    Eiras, Pedro

    2012-01-01

    This article reflects on Genette's most recent work and his theorisation on his own work (its unity and heterogeneity) and the recent multiplication of the areas of study (from music to painting, from Stendhal to Proust). Note is also made of Genette's idiosyncrasy in Figures IV.

  19. Figures of Association and Sound in some Nigerian Proverbs ...

    African Journals Online (AJOL)

    Figures of Speech are expressions which depart from the acceptable literary sense that are employed to give particular emphasis to an idea or a sentiment in order to beautify a literary work such as poetry and proverbs. These devices occupy an important position in proverbs and they perform functions which make the ...

  20. Arborescent vascular dilatation mimicking Lichtenberg figures from lightning.

    Science.gov (United States)

    Tempark, Therdpong; Iwasaki, Julie; Shwayder, Tor

    2014-01-01

    The clinical presentation of arborizing vascular dilatation can resemble Lichtenberg figures from lightning. Both have a feather-like or ferning pattern. We report an interesting case of pressure-induced vasodilatation (PIV) caused by temporary vascular occlusion from jeans buttons. © 2014 Wiley Periodicals, Inc.

  1. Avoiding common pitfalls of manuscript and figure preparation.

    Science.gov (United States)

    Collins, Súil; Gemayel, Rita; Chenette, Emily J

    2017-05-01

    Accurate and clear representation of scientific data is essential for the advancement of science. In this instalment of the Words of Advice series, we feature guidelines and tips on best practices for writing manuscripts, designing experiments and preparing figures and images for publication. © 2017 Federation of European Biochemical Societies.

  2. Figure Drawing as an Expression of Self-Esteem

    Science.gov (United States)

    Coopersmith, Stanley; And Others

    1976-01-01

    Results of the study show that several features of figure drawing identify the children who differ in self esteem. These differentiating features are associated with behavioral expressions of esteem rather than with self-appraisals of personal worth. (Author/DEP)

  3. Forces on a magnet moving past figure-eight coils

    International Nuclear Information System (INIS)

    Mulcahy, T.H.; He, Jianliang; Rote, D.M.; Rossing, T.D.

    1993-01-01

    For the first time, the lift, drag, and guidance forces acting on a permanent magnet are measured as the magnet passes over different arrays of figure-eight (null-flux) coils. The experimental results are in good agreement with the predictions of dynamic circuit theory, which is used to explain more optimal coil arrays

  4. Assessment of the Volume and Value of Slaughter Animals Figures ...

    African Journals Online (AJOL)

    Data on 2003 – 2005 cattle and goats slaughter figures for Rivers State was obtained from the meat inspection records of the Department of Veterinary Services, Rivers State Ministry of Agriculture, Port Harcourt. Total number of cattle and goats inspected and slaughtered at Rumueme slaughter slab, in Port Harcourt ...

  5. Body figure preference in South African adolescent females: A cross ...

    African Journals Online (AJOL)

    Methods: The sample comprised a community based, multi-racial adolescent population in both urban (n=1353) and rural (n=361) areas. The Body Figure Preference Test [BFPT] was administered. Results: Most urban respondents had a desire to be smaller (white=72%; black=61%), whereas rural black respondents were ...

  6. Research as Art: Using figures to make science approachable

    Science.gov (United States)

    Rabinowitz, H. S.; Barth, A.; Russell, J. B.; Frischkorn, K.; Yehudai, M.

    2017-12-01

    As scientists, we spend a significant amount of time thinking about how best to express the results of our research through figures. These can range from graphs to microscope images to movies, but they all serve the purpose of communicating complicated ideas to our colleagues in the scientific community. One component of scientific data representation that is often overlooked is the aesthetic of the image. Many images produced for data communication and publication are visually engaging even to a lay audience, allowing them to serve as a point of entry to learning about scientific research for the non-specialist. To help researchers embrace this secondary goal of scientific figures, we have instituted an annual event at the Lamont-Doherty Earth Observatory of Columbia University (LDEO) called Research as Art. For this event, scientists submit figures from their work that they see as artistic. These figures are displayed in a gallery-type exhibit for the community to appreciate. This year, the exhibit included movie and sculpture categories, allowing for attendees to interact with a broader range of scientific work. Each piece is accompanied by a brief, non-technical caption. Research as Art provides a gateway for scientists from a broad range of disciplines within the Earth Sciences to learn about work that is entirely unrelated to their own. After the event, attendees commented that they had never before thought about how a non-specialist would view their figures and that they would keep this in mind when making future figures. Thus, one of the biggest benefits of exhibits such as this is to teach scientists to view our work through a non-specialist's eyes. However, future plans for Research as Art include establishing a temporary exhibit at a local bar to expand the reach to a broader segment of the Columbia University area community. Our figures are art, and when we start to treat them that way, we open a world of possibilities for teaching the public about our

  7. Distinguishing Errors in Measurement from Errors in Optimization

    OpenAIRE

    Rulon D. Pope; Richard E. Just

    2003-01-01

    Typical econometric production practices under duality ignore the source of disturbances. We show that, depending on the source, a different approach to estimation is required. The typical approach applies under errors in factor input measurement rather than errors in optimization. An approach to the identification of disturbance sources is suggested. We find credible evidence in U.S. agriculture of errors in optimization compared to errors of measurement, and thus reject the typical specific...

  8. Minimum Error Entropy Classification

    CERN Document Server

    Marques de Sá, Joaquim P; Santos, Jorge M F; Alexandre, Luís A

    2013-01-01

    This book explains the minimum error entropy (MEE) concept applied to data classification machines. Theoretical results on the inner workings of the MEE concept, in its application to solving a variety of classification problems, are presented in the wider realm of risk functionals. Researchers and practitioners also find in the book a detailed presentation of practical data classifiers using MEE. These include multi‐layer perceptrons, recurrent neural networks, complexvalued neural networks, modular neural networks, and decision trees. A clustering algorithm using a MEE‐like concept is also presented. Examples, tests, evaluation experiments and comparison with similar machines using classic approaches, complement the descriptions.

  9. Figurative language processing in atypical populations: The ASD perspective

    Directory of Open Access Journals (Sweden)

    Mila eVulchanova

    2015-02-01

    Full Text Available This paper is intended to provide a critical overview of experimental and clinical research documenting problems in figurative language processing in atypical populations with a focus on the Autistic Spectrum. Research in the comprehension and processing of figurative language in autism invariably documents problems in this area. The greater paradox is that even at the higher end of the spectrum or in the cases of linguistically talented individuals with Asperger syndrome, where structural language competence is intact, problems with extended language persist. If we assume that figurative and extended uses of language essentially depend on the perception and processing of more concrete core concepts and phenomena, the commonly observed failure in atypical populations to understand figurative language remains a puzzle.Various accounts have been offered to explain this issue, ranging from linking potential failure directly to overall structural language competence (Brock et al., 2008; Norbury, 2005 to right-hemispheric involvement (Gold and Faust, 2010. We argue that the dissociation between structural language and figurative language competence in autism should be sought in more general cognitive mechanisms and traits in the autistic phenotype (e.g., in terms of weak central coherence, Vulchanova et al., 2012b, as well as failure at on-line semantic integration with increased complexity and diversity of the stimuli (Coulson and van Petten, 2002. This perspective is even more compelling in light of similar problems in a number of conditions, including both acquired (e.g., Aphasia and developmental disorders (Williams Syndrome. This dissociation argues against a simple continuity view of language interpretation.

  10. Generation of coordinates in PC for graphics of polar figure

    International Nuclear Information System (INIS)

    Macias B, L.R.

    1991-10-01

    The preferential orientation, not alone it exists in metals, but also in minerals or in general in crystalline materials, notwithstanding in the metals it can be transformed by means of those processes of having mechanical worked such as laminate, wrapping, etc. To the preferable orientation of the crystals is also known as texture and since the properties of the crystalline materials lens depend on the orientation that present its glasses, it is important to know its texture. The difficulty for to represent and to describe the grade of preferential orientation in textured materials take to F. Weber to adapt the stereo graphic projection of a monocrystal to a poles figure. Later on, its appeared but methods to obtain the polar figure, among them, that of reflection of L. G. Schultz, but again a technique appears it specifies for its obtaining. In all the cases, the methodology is the following one: a) It is obtained by means of the diffraction process, the correspondent spectra in digitized form. b) it is applied process of having softened mathematician of the spectrum. c) there are determined the fi coordinates, beta and intensity for graph nts of the polar figure. d) Its are graph the points generated in c obtaining the polar figures. The objective of this work, is leaving of a softened spectra, to generate the coordinated fi, beta and corresponding intensity to proceed to their graph and generation of the polar figure. In this specific work, the methodology of Philips is used that consists in making a sweeping in hairspring form with the radiation to detect in these points the execution of the Bragg law. (Author)

  11. Error Analysis for Interferometric SAR Measurements of Ice Sheet Flow

    DEFF Research Database (Denmark)

    Mohr, Johan Jacob; Madsen, Søren Nørvang

    1999-01-01

    and slope errors in conjunction with a surface parallel flow assumption. The most surprising result is that assuming a stationary flow the east component of the three-dimensional flow derived from ascending and descending orbit data is independent of slope errors and of the vertical flow....

  12. Surface tritium contamination studies

    International Nuclear Information System (INIS)

    Sienkiewicz, C.J.

    1986-01-01

    Glovebox wipe surveys were conducted to correlate surface tritium contamination with atmospheric tritium levels. Surface contamination was examined as a function of tritium concentration and limited to the HT/T 2 form. The previously predicted relationship between atmospheric HTO concentration and cleanup times was examined in order to predict a model for atmospheric detritiation of stainless steel enclosures. 2 figures, 2 tables

  13. Understanding error generation in fused deposition modeling

    International Nuclear Information System (INIS)

    Bochmann, Lennart; Transchel, Robert; Wegener, Konrad; Bayley, Cindy; Helu, Moneer; Dornfeld, David

    2015-01-01

    Additive manufacturing offers completely new possibilities for the manufacturing of parts. The advantages of flexibility and convenience of additive manufacturing have had a significant impact on many industries, and optimizing part quality is crucial for expanding its utilization. This research aims to determine the sources of imprecision in fused deposition modeling (FDM). Process errors in terms of surface quality, accuracy and precision are identified and quantified, and an error-budget approach is used to characterize errors of the machine tool. It was determined that accuracy and precision in the y direction (0.08–0.30 mm) are generally greater than in the x direction (0.12–0.62 mm) and the z direction (0.21–0.57 mm). Furthermore, accuracy and precision tend to decrease at increasing axis positions. The results of this work can be used to identify possible process improvements in the design and control of FDM technology. (paper)

  14. Understanding error generation in fused deposition modeling

    Science.gov (United States)

    Bochmann, Lennart; Bayley, Cindy; Helu, Moneer; Transchel, Robert; Wegener, Konrad; Dornfeld, David

    2015-03-01

    Additive manufacturing offers completely new possibilities for the manufacturing of parts. The advantages of flexibility and convenience of additive manufacturing have had a significant impact on many industries, and optimizing part quality is crucial for expanding its utilization. This research aims to determine the sources of imprecision in fused deposition modeling (FDM). Process errors in terms of surface quality, accuracy and precision are identified and quantified, and an error-budget approach is used to characterize errors of the machine tool. It was determined that accuracy and precision in the y direction (0.08-0.30 mm) are generally greater than in the x direction (0.12-0.62 mm) and the z direction (0.21-0.57 mm). Furthermore, accuracy and precision tend to decrease at increasing axis positions. The results of this work can be used to identify possible process improvements in the design and control of FDM technology.

  15. Analysis of the interface tracking errors

    International Nuclear Information System (INIS)

    Cerne, G.; Tiselj, I.; Petelin, S.

    2001-01-01

    An important limitation of the interface-tracking algorithm is the grid density, which determines the space scale of the surface tracking. In this paper the analysis of the interface tracking errors, which occur in a dispersed flow, is performed for the VOF interface tracking method. A few simple two-fluid tests are proposed for the investigation of the interface tracking errors and their grid dependence. When the grid density becomes too coarse to follow the interface changes, the errors can be reduced either by using denser nodalization or by switching to the two-fluid model during the simulation. Both solutions are analyzed and compared on a simple vortex-flow test.(author)

  16. Digital Moiré based transient interferometry and its application in optical surface measurement

    Science.gov (United States)

    Hao, Qun; Tan, Yifeng; Wang, Shaopu; Hu, Yao

    2017-10-01

    Digital Moiré based transient interferometry (DMTI) is an effective non-contact testing methods for optical surfaces. In DMTI system, only one frame of real interferogram is experimentally captured for the transient measurement of the surface under test (SUT). When combined with partial compensation interferometry (PCI), DMTI is especially appropriate for the measurement of aspheres with large apertures, large asphericity or different surface parameters. Residual wavefront is allowed in PCI, so the same partial compensator can be applied to the detection of multiple SUTs. Excessive residual wavefront aberration results in spectrum aliasing, and the dynamic range of DMTI is limited. In order to solve this problem, a method based on wavelet transform is proposed to extract phase from the fringe pattern with spectrum aliasing. Results of simulation demonstrate the validity of this method. The dynamic range of Digital Moiré technology is effectively expanded, which makes DMTI prospective in surface figure error measurement for intelligent fabrication of aspheric surfaces.

  17. Payment Error Rate Measurement (PERM)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The PERM program measures improper payments in Medicaid and CHIP and produces error rates for each program. The error rates are based on reviews of the...

  18. Standard Errors for Matrix Correlations.

    Science.gov (United States)

    Ogasawara, Haruhiko

    1999-01-01

    Derives the asymptotic standard errors and intercorrelations for several matrix correlations assuming multivariate normality for manifest variables and derives the asymptotic standard errors of the matrix correlations for two factor-loading matrices. (SLD)

  19. Human Error in Pilotage Operations

    Directory of Open Access Journals (Sweden)

    Jørgen Ernstsen

    2018-03-01

    Full Text Available Pilotage operations require close interaction between human and machines. This complex sociotechnical system is necessary to safely and efficiently maneuver a vessel in constrained waters. A sociotechnical system consists of interdependent human- and technical variables that continuously must work together to be successful. This complexity is prone to errors, and statistics show that most these errors in the maritime domain are due to human components in the system (80 ? 85%. This explains the attention on research to reduce human errors. The current study deployed a systematic human error reduction and prediction approach (SHERPA to shed light on error types and error remedies apparent in pilotage operations. Data was collected using interviews and observation. Hierarchical task analysis was performed and 55 tasks were analyzed using SHERPA. Findings suggests that communication and action omission errors are most prone to human errors in pilotage operations. Practical and theoretical implications of the results are discussed.

  20. Error Detection in ESL Teaching

    OpenAIRE

    Rogoveanu Raluca

    2011-01-01

    This study investigates the role of error correction in the larger paradigm of ESL teaching and learning. It conceptualizes error as an inevitable variable in the process of learning and as a frequently occurring element in written and oral discourses of ESL learners. It also identifies specific strategies in which error can be detected and corrected and makes reference to various theoretical trends and their approach to error correction, as well as to the relation between language instructor...

  1. [The error, source of learning].

    Science.gov (United States)

    Joyeux, Stéphanie; Bohic, Valérie

    2016-05-01

    The error itself is not recognised as a fault. It is the intentionality which differentiates between an error and a fault. An error is unintentional while a fault is a failure to respect known rules. The risk of error is omnipresent in health institutions. Public authorities have therefore set out a series of measures to reduce this risk. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  2. 3–10 keV Xe+ ion beam machining of ultra low thermal expansion glasses for EUVL projection optics: Evaluation of surface roughness

    International Nuclear Information System (INIS)

    Morikawa, K.; Kamijo, K.; Morijiri, K.; Pahlovy, S.A.; Aikawa, N.; Miyamoto, I.

    2012-01-01

    In order to obtain surface figure error of 0.15 nm rms and surface roughness (R rms ) of 0.12 nm rms for aspherical substrates in EUVL tools, ion beam figuring may be adopted to final surface figure error correction of aspherical substrates. During figure error correction, machined surface of the substrate becomes rougher than the pre-finished one. Therefore, we investigated the machined depth and ion energy dependences of R rms (measured by an AFM) of substrates machined by 3–10 keV Xe + ion beam, and compared them with the results obtained for Ar + ion beam. Result shows that the R rms s of CLEARCERAM®-Z, Zerodur® and ULE® substrates machined to the depth of 50 nm by 3–10 keV Xe + ion beam at the normal ion incidence angle become approximately 0.25, 0.28 and 0.15 nm rms, respectively. Those values are larger than the pre-finished substrates (0.07–0.09 nm rms), but smaller than that (0.60 nm rms for CLEARCERAM®-Z, 0.61 nm rms for Zerodur® and 0.18 nm rms for ULE®) of the substrates machined by Ar + ion beam. Moreover, the R rms s merely increase with increasing ion energy. The R rms s of the ULE® substrate machined by 3–10 keV Xe + ion beam rapidly increase with increasing machined depth, then saturate at machined depth of 10–50 nm. The saturated values of the R rms s are 0.12 and 0.15 nm rms for 3 and 10 keV Xe + ion beam respectively. We suggest that the 3 keV Xe + ion beam machining can be applicable for final shape correction of ULE® substrates for EUVL projection optics in association with considering further ultra smoothing process such as Si deposition or low energy ion beam smoothing.

  3. Inborn errors of metabolism: a clinical overview

    Directory of Open Access Journals (Sweden)

    Ana Maria Martins

    1999-11-01

    Full Text Available CONTEXT: Inborn errors of metabolism cause hereditary metabolic diseases (HMD and classically they result from the lack of activity of one or more specific enzymes or defects in the transportation of proteins. OBJECTIVES: A clinical review of inborn errors of metabolism (IEM to give a practical approach to the physician with figures and tables to help in understanding the more common groups of these disorders. DATA SOURCE: A systematic review of the clinical and biochemical basis of IEM in the literature, especially considering the last ten years and a classic textbook (Scriver CR et al, 1995. SELECTION OF STUDIES: A selection of 108 references about IEM by experts in the subject was made. Clinical cases are presented with the peculiar symptoms of various diseases. DATA SYNTHESIS: IEM are frequently misdiagnosed because the general practitioner, or pediatrician in the neonatal or intensive care units, does not think about this diagnosis until the more common cause have been ruled out. This review includes inheritance patterns and clinical and laboratory findings of the more common IEM diseases within a clinical classification that give a general idea about these disorders. A summary of treatment types for metabolic inherited diseases is given. CONCLUSIONS: IEM are not rare diseases, unlike previous thinking about them, and IEM patients form part of the clientele in emergency rooms at general hospitals and in intensive care units. They are also to be found in neurological, pediatric, obstetrics, surgical and psychiatric clinics seeking diagnoses, prognoses and therapeutic or supportive treatment.

  4. Managing errors in radiology: a working model

    International Nuclear Information System (INIS)

    Melvin, C.; Bodley, R.; Booth, A.; Meagher, T.; Record, C.; Savage, P.

    2004-01-01

    AIM: To develop a practical mechanism for reviewing reporting discrepancies as addressed in the Royal College of Radiologists publication 'To err is human. The case for review of reporting discrepancies'. MATERIALS AND METHODS: A regular meeting was developed, and has evolved, within the department to review discrepancies. Standard forms were devised for submission of cases as well as recording and classification of discrepancies. This has resulted in availability of figures that can be audited annually. RESULTS: Eighty-one cases involving error were reviewed over a 12-month period. Seven further cases flagged as discrepancies were not identified on peer review. Twenty-four reports were amended subsequent to the meeting. Nineteen additional cases were brought to the meeting as illustrative of teaching points or for discussion. CONCLUSION: We have evolved a successful process of reviewing reporting errors, which enjoys the confidence and support of all clinical radiologists, and is perceived as a method of improving patient care through an increasing awareness of lapses in performance

  5. Reducing nurse medicine administration errors.

    Science.gov (United States)

    Ofosu, Rose; Jarrett, Patricia

    Errors in administering medicines are common and can compromise the safety of patients. This review discusses the causes of drug administration error in hospitals by student and registered nurses, and the practical measures educators and hospitals can take to improve nurses' knowledge and skills in medicines management, and reduce drug errors.

  6. Uncertainty quantification and error analysis

    Energy Technology Data Exchange (ETDEWEB)

    Higdon, Dave M [Los Alamos National Laboratory; Anderson, Mark C [Los Alamos National Laboratory; Habib, Salman [Los Alamos National Laboratory; Klein, Richard [Los Alamos National Laboratory; Berliner, Mark [OHIO STATE UNIV.; Covey, Curt [LLNL; Ghattas, Omar [UNIV OF TEXAS; Graziani, Carlo [UNIV OF CHICAGO; Seager, Mark [LLNL; Sefcik, Joseph [LLNL; Stark, Philip [UC/BERKELEY; Stewart, James [SNL

    2010-01-01

    UQ studies all sources of error and uncertainty, including: systematic and stochastic measurement error; ignorance; limitations of theoretical models; limitations of numerical representations of those models; limitations on the accuracy and reliability of computations, approximations, and algorithms; and human error. A more precise definition for UQ is suggested below.

  7. Cardiovascular medication errors in children.

    Science.gov (United States)

    Alexander, Diana C; Bundy, David G; Shore, Andrew D; Morlock, Laura; Hicks, Rodney W; Miller, Marlene R

    2009-07-01

    We sought to describe pediatric cardiovascular medication errors and to determine patients and medications with more-frequently reported and/or more-harmful errors. We analyzed cardiovascular medication error reports from 2003-2004 for patients error, no harm; E-I, harmful error). Proportions of harmful reports were determined according to drug class and age group. "High-risk" drugs were defined as antiarrhythmics, antihypertensives, digoxin, and calcium channel blockers. A total of 147 facilities submitted 821 reports with community hospitals predominating (70%). Mean patient age was 4 years (median: 0.9 years). The most common error locations were NICUs, general care units, PICUs, pediatric units, and inpatient pharmacies. Drug administration, particularly improper dosing, was implicated most commonly. Severity analysis showed 5% "near misses," 91% errors without harm, and 4% harmful errors, with no reported fatalities. A total of 893 medications were cited in 821 reports. Diuretics were cited most frequently, followed by antihypertensives, angiotensin inhibitors, beta-adrenergic receptor blockers, digoxin, and calcium channel blockers. Calcium channel blockers, phosphodiesterase inhibitors, antiarrhythmics, and digoxin had the largest proportions of harmful events, although the values were not statistically significantly different from those for other drug classes. Infants medication errors reaching inpatients, in a national, voluntary, error-reporting database. Proportions of harmful errors were not significantly different by age or cardiovascular medication. Most errors were related to medication administration, largely due to improper dosing.

  8. Edge maps: Representing flow with bounded error

    KAUST Repository

    Bhatia, Harsh

    2011-03-01

    Robust analysis of vector fields has been established as an important tool for deriving insights from the complex systems these fields model. Many analysis techniques rely on computing streamlines, a task often hampered by numerical instabilities. Approaches that ignore the resulting errors can lead to inconsistencies that may produce unreliable visualizations and ultimately prevent in-depth analysis. We propose a new representation for vector fields on surfaces that replaces numerical integration through triangles with linear maps defined on its boundary. This representation, called edge maps, is equivalent to computing all possible streamlines at a user defined error threshold. In spite of this error, all the streamlines computed using edge maps will be pairwise disjoint. Furthermore, our representation stores the error explicitly, and thus can be used to produce more informative visualizations. Given a piecewise-linear interpolated vector field, a recent result [15] shows that there are only 23 possible map classes for a triangle, permitting a concise description of flow behaviors. This work describes the details of computing edge maps, provides techniques to quantify and refine edge map error, and gives qualitative and visual comparisons to more traditional techniques. © 2011 IEEE.

  9. The Role of Human Error in Design, Construction, and Reliability of Marine Structures.

    Science.gov (United States)

    1994-10-01

    WELDING RESEARCH COUNCIL Dr. Ramswar Bhattacharyya Dr. Martin Prager CANADA CENTRE FOR MINERALS AND AMERICAN IRON AND STEEL INSTITUTE ENERGY...construction of ship structures. Figure 1.2 - Human errors * Can HOE be quantified ? Yes, if and as desirable, HOE can be Organizion Error Clasification ...could be quality control problems such as excessive misalignments or use of lower grade steel that would result in systematically lowering the

  10. Error Quantification and Confidence Assessment of Aerothermal Model Predictions for Hypersonic Aircraft (Preprint)

    Science.gov (United States)

    2013-09-01

    and M1 using Latin Hypercube sampling . For each of those samples , a Markov Chain Monte Carlo ( MCMC ) algorithm called slice sampling is employed using...104 samples to calculate the posterior distribution. Figures 6 and 7 show the integrated posterior distributions for the uncertain inputs and errors...include errors from sampling , discretization, coupled solution procedures, and other mathematical approximations. In the presence of these various

  11. Figural medley: At the origins of XIXth Century anthropological portrait

    Directory of Open Access Journals (Sweden)

    Alberto Baldi

    2017-07-01

    Full Text Available During the second half of the XIXth century, Europe, the United States and Russia witnessed a blossoming interest in the use of photography in the anthropological field, its specific use was not very clear and defined yet; as a consequence, its heuristic methodologies, technical shooting modalities, stylistic elements and figurative conventions were not clear either. We range goes from anthropometric photography to an ethnographic and folkloric portrait painting signed at the same time by anthropologists and travellers, professional photographers looking for exotic subjects, amateur photographers and soldiers who encourage a figural medley characterised by scientific, commercial and artistic veins that slowly finds its definition in some of its prevailing features, in primis those of the portrait with pictorial origins, however continuously declined and reinterpreted in several ways. In this context Anthropology seeks some links with aesthetics.

  12. Thermoelectric figure of merit of chiral carbon nanotube

    International Nuclear Information System (INIS)

    Mensah, N.G.; Nkrumah-Buandoh, G.K.; Mensah, S.Y.; Allotey, F.K.A.; Twum, A.K.

    2005-09-01

    We have investigated the thermoelectrical properties of chiral carbon nanotube and numerically evaluated the figure of merit. We observed that the properties are highly anisotropic and depend on the geometric chiral angle (GCA) θ h , temperature and the overlapping integrals (exchange energy) for the jumps along the tubular axis Δ z and the base helix Δ s . The thermopower α exhibited giant values with the peak occurring between 100 K and 150 K. The electron thermal conductivity showed unusually high value with the peaks shifting towards high temperature. We attribute the high peak values to electron-phonon interactions. Finally we noted that by changing the Δ s and Δ z it is possible to get a figure of merit greater than 1. (author)

  13. The Masculine Image of Presidents As Sporting Figures

    Directory of Open Access Journals (Sweden)

    Aaron J. Moore

    2012-07-01

    Full Text Available This article explores the role of the president identifying himself as a sporting figure, which can be successful as well as detrimental in the presidents’ overall public relations strategy, through an ideological criticism lens. To make this argument, the authors start by examining the role of sports in American popular culture and its relationship to a strong masculine image. Recognizing the value of publicity in the mediated political world, they then trace the evolution of the president from Eisenhower to Obama identifying himself as a sporting figure through the mass media. The article specifically focuses on the two most recent presidents’ use of sports and its effect on their masculine image. The authors conclude by addressing the implications of a future female president’s strategic use of sports.

  14. Ambiguous benefits: the effect of bilingualism on reversing ambiguous figures.

    Science.gov (United States)

    Bialystok, Ellen; Shapero, Dana

    2005-11-01

    Two studies are reported in which monolingual and bilingual children, approximately 6 years old, attempted to identify the alternative image in a reversible figure. In both studies, bilingual children were more successful than monolinguals in seeing the other meaning in the images. In the first study, there was no relation between the ability to reverse the interpretation and performance on the children's embedded figures task, a task that superficially appeared to involve similar processes. The second study replicated this finding but showed that performance was strongly related to success in the post-switch phase of the dimensional change card sort task. In both cases, the meaning of an image must be reassigned, and bilinguals were better in both these tasks.

  15. Polarization preservation and control in a figure-8 ring

    Energy Technology Data Exchange (ETDEWEB)

    Derbenev, Yaroslav S. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Morozov, Vasiliy [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Lin, Fanglei [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Zhang, Yuhong [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kondratenko, A. M. [GOO Zaryad, Russkaya st., 41, Novosibirsk, 630058; Kondratenko, M. A. [GOO Zaryad, Russkaya st., 41, Novosibirsk, 630058; Filatov, Yuri [Joint Inst. for Nuclear Research (JINR), Dubna (Russian Federation); GOO Zaryad, Russkaya st., 41, Novosibirsk, 630058

    2016-02-01

    We present a complete scheme for managing the polarization of ion beams in Jefferson Lab's proposed Medium-energy Electron-Ion Collider (MEIC). It provides preservation of the ion polarization during all stages of beam acceleration and polarization control in the collider's experimental straights. We discuss characteristic features of the spin motion in accelerators with Siberian snakes and in accelerators of figure-8 shape. We propose 3D spin rotators for polarization control in the MEIC ion collider ring. We provide polarization calculations in the collider with the 3D rotator for deuteron and proton beams. The main polarization control features of the figure-8 design are summarized.

  16. Discriminating Models of Different Sized Color Geometric Figures

    Directory of Open Access Journals (Sweden)

    Y A Chudina

    2013-12-01

    Full Text Available The data obtained by us in two experiments, where the different sized color geometric figures were used as stimuli, are described in the article. We have built configurative and categorical discriminating models differing by formal and intensional characteristics. The models reflect the different ways of visual gestalt generation: additive and non-additive principles of consolidation of neural mechanisms analyzing the visual features of the picture.

  17. Urban Regeneration Partnerships: A Figurational Critique of Governmentality Theory

    OpenAIRE

    Lever, John

    2011-01-01

    This article provides a critique of governmentally inspired accounts of urban regeneration and partnership working. Drawing on the work of Norbert Elias and prominent figurational sociologists, it discusses the changes taking place within and through the many partnerships set up by New Labour around the notion of ‘community safety’. Although recognizing the important insights provided by accounts of urban regeneration emerging through studies of governmentality, the article argues that such a...

  18. Selection and presentation of imaging figures in the medical literature.

    Directory of Open Access Journals (Sweden)

    George C M Siontis

    Full Text Available BACKGROUND: Images are important for conveying information, but there is no empirical evidence on whether imaging figures are properly selected and presented in the published medical literature. We therefore evaluated the selection and presentation of radiological imaging figures in major medical journals. METHODOLOGY/PRINCIPAL FINDINGS: We analyzed articles published in 2005 in 12 major general and specialty medical journals that had radiological imaging figures. For each figure, we recorded information on selection, study population, provision of quantitative measurements, color scales and contrast use. Overall, 417 images from 212 articles were analyzed. Any comment/hint on image selection was made in 44 (11% images (range 0-50% across the 12 journals and another 37 (9% (range 0-60% showed both a normal and abnormal appearance. In 108 images (26% (range 0-43% it was unclear whether the image came from the presented study population. Eighty-three images (20% (range 0-60% had any quantitative or ordered categorical value on a measure of interest. Information on the distribution of the measure of interest in the study population was given in 59 cases. For 43 images (range 0-40%, a quantitative measurement was provided for the depicted case and the distribution of values in the study population was also available; in those 43 cases there was no over-representation of extreme than average cases (p = 0.37. SIGNIFICANCE: The selection and presentation of images in the medical literature is often insufficiently documented; quantitative data are sparse and difficult to place in context.

  19. Combas & Co. or the Figure and the Great Divide

    Directory of Open Access Journals (Sweden)

    Monique Yaari

    1996-06-01

    Full Text Available The young painter, Robert Combas, leader of the 1980s "figuration libre" 'free figuration' movement, is seen here both as representative of stylistic and thematic trends in contemporary French art, and as illustrative, through the unfolding of his career, of the object "painting" and its sociology in contemporary France. Examined are: first, the "Postmodern convergence" of figurative, indeed narrative art, with the collapse of the "great divide" between elite and popular art forms; and second, traits such as hypertrophic verbal paratext, high erotic content, and political stand. Similar threads are followed in the work of a number of other artists, old and young, established or not, female and male—hence the "& Co." of the title. The essay raises, without claiming to solve, a set of sociologically and politically informed questions: What forces have shaped Combas' sensibility and style? What forces have made him a minor celebrity domestically, one that France's awesome cultural apparatus considers worthy of export? What, in the formation of contemporary mentalities and tastes, may account for the parallels found among artists as diverse as Combas, Quardon, Pierre and Gilles, Ben, and Klossowski?

  20. Francis Bacon: The Real's Brutality. The Figure and the Other

    Directory of Open Access Journals (Sweden)

    Guido Mannucci

    2014-03-01

    Full Text Available Getting in front of painting by Francis Bacon touches you deeply. I’m talking about aesthetics, sensations: resounding flow that strikes abruptly, making futile any search for meaning. Francis Bacon circumvents the figurative, the meaning, he aims to the figural: to feelings, not words. Beauty, in his paintings, shows itself in the peaceful union of the positive and of its contrary; if the negative wasn’t there, though, his paintings wouldn’t exude such a brutal sense of reality. This essay investigates the figure of Francis Bacon and the spectator – the Other – as he tries to confront the painting. Bacon will be analysed using a purely phenomenological approach, with references that range from Merleau-Ponty to Martin Heidegger; the meeting-collision between the spectator and the painting, instead, will be examined taking inspiration from the Winnicott’s thesis on the relationship between Bacon and mirrors in the painter’s childhood. In order to take distance from Winnicott’s psychoanalytical approach, this essay will focus on the relationship between spectator and painting from a more anthropological point of view. 

  1. Mitotic Figure Recognition: Agreement among Pathologists and Computerized Detector

    Directory of Open Access Journals (Sweden)

    Christopher Malon

    2012-01-01

    Full Text Available Despite the prognostic importance of mitotic count as one of the components of the Bloom – Richardson grade [3], several studies ([2, 9, 10] have found that pathologists’ agreement on the mitotic grade is fairly modest. Collecting a set of more than 4,200 candidate mitotic figures, we evaluate pathologists' agreement on individual figures, and train a computerized system for mitosis detection, comparing its performance to the classifications of three pathologists. The system’s and the pathologists’ classifications are based on evaluation of digital micrographs of hematoxylin and eosin stained breast tissue. On figures where the majority of pathologists agree on a classification, we compare the performance of the trained system to that of the individual pathologists. We find that the level of agreement of the pathologists ranges from slight to moderate, with strong biases, and that the system performs competitively in rating the ground truth set. This study is a step towards automatic mitosis count to accelerate a pathologist's work and improve reproducibility.

  2. Figuring out’ in science and the humanities

    Directory of Open Access Journals (Sweden)

    Giuseppe Martella

    2011-01-01

    Full Text Available The purpose of this article is to enquire into the notion of change in figures of speech, concepts, topics, and technical instruments-models when they are “travelling” through different milieus, contexts, systems or disciplines. I conceive of this travelling as a basic exchange of energy/information, amounting to an event which can reshape a given field of experience. My argument is based on the premise that our experience happens at multiple levels and areas, and develops along different phases, which imperceptibly flow into each other and bear at times barely decipherable traces of the events that have constituted them. The processes happening at a different level from that of present perception can only be conceived of as infractions of the world tissue and of the related universe of discourse. Therefore in any field of enquiry the process of discovery can develop only through figures of discourse. My thesis is that, at the present stage of techno-science, Scriptural Figurality, which constitutes the basis of both Western epistemology and hermeneutics, is superseded and has to be replaced by a new hypermedial rhetoric, capable to cope with complexity, infraction and emergence, both in science and the humanities.

  3. Controlling errors in unidosis carts

    Directory of Open Access Journals (Sweden)

    Inmaculada Díaz Fernández

    2010-01-01

    Full Text Available Objective: To identify errors in the unidosis system carts. Method: For two months, the Pharmacy Service controlled medication either returned or missing from the unidosis carts both in the pharmacy and in the wards. Results: Uncorrected unidosis carts show a 0.9% of medication errors (264 versus 0.6% (154 which appeared in unidosis carts previously revised. In carts not revised, the error is 70.83% and mainly caused when setting up unidosis carts. The rest are due to a lack of stock or unavailability (21.6%, errors in the transcription of medical orders (6.81% or that the boxes had not been emptied previously (0.76%. The errors found in the units correspond to errors in the transcription of the treatment (3.46%, non-receipt of the unidosis copy (23.14%, the patient did not take the medication (14.36%or was discharged without medication (12.77%, was not provided by nurses (14.09%, was withdrawn from the stocks of the unit (14.62%, and errors of the pharmacy service (17.56% . Conclusions: It is concluded the need to redress unidosis carts and a computerized prescription system to avoid errors in transcription.Discussion: A high percentage of medication errors is caused by human error. If unidosis carts are overlooked before sent to hospitalization units, the error diminishes to 0.3%.

  4. Prioritising interventions against medication errors

    DEFF Research Database (Denmark)

    Lisby, Marianne; Pape-Larsen, Louise; Sørensen, Ann Lykkegaard

    Abstract Authors: Lisby M, Larsen LP, Soerensen AL, Nielsen LP, Mainz J Title: Prioritising interventions against medication errors – the importance of a definition Objective: To develop and test a restricted definition of medication errors across health care settings in Denmark Methods: Medication...... errors constitute a major quality and safety problem in modern healthcare. However, far from all are clinically important. The prevalence of medication errors ranges from 2-75% indicating a global problem in defining and measuring these [1]. New cut-of levels focusing the clinical impact of medication...... errors are therefore needed. Development of definition: A definition of medication errors including an index of error types for each stage in the medication process was developed from existing terminology and through a modified Delphi-process in 2008. The Delphi panel consisted of 25 interdisciplinary...

  5. Error adaptation in mental arithmetic.

    Science.gov (United States)

    Desmet, Charlotte; Imbo, Ineke; De Brauwer, Jolien; Brass, Marcel; Fias, Wim; Notebaert, Wim

    2012-01-01

    Until now, error and conflict adaptation have been studied extensively using simple laboratory tasks. A common finding is that responses slow down after errors. According to the conflict monitoring theory, performance should also improve after an error. However, this is usually not observed. In this study, we investigated whether the characteristics of the experimental paradigms normally used could explain this absence. More precisely, these paradigms have in common that behavioural adaptation has little room to be expressed. We therefore studied error and conflict adaptation effects in a task that encounters the richness of everyday life's behavioural adaptation--namely, mental arithmetic, where multiple solution strategies are available. In accordance with our hypothesis, we observed that post-error accuracy increases after errors in mental arithmetic. No support for conflict adaptation in mental arithmetic was found. Implications for current theories of conflict and error monitoring are discussed.

  6. Error modeling and sensitivity analysis of a parallel robot with SCARA(selective compliance assembly robot arm) motions

    Science.gov (United States)

    Chen, Yuzhen; Xie, Fugui; Liu, Xinjun; Zhou, Yanhua

    2014-07-01

    Parallel robots with SCARA(selective compliance assembly robot arm) motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parallelogram structures included by the robots as a link. As the established error model fails to reflect the error feature of the parallelogram structures, the effect of accuracy design and kinematic calibration based on the error model come to be undermined. An error modeling methodology is proposed to establish an error model of parallel robots with parallelogram structures. The error model can embody the geometric errors of all joints, including the joints of parallelogram structures. Thus it can contain more exhaustively the factors that reduce the accuracy of the robot. Based on the error model and some sensitivity indices defined in the sense of statistics, sensitivity analysis is carried out. Accordingly, some atlases are depicted to express each geometric error's influence on the moving platform's pose errors. From these atlases, the geometric errors that have greater impact on the accuracy of the moving platform are identified, and some sensitive areas where the pose errors of the moving platform are extremely sensitive to the geometric errors are also figured out. By taking into account the error factors which are generally neglected in all existing modeling methods, the proposed modeling method can thoroughly disclose the process of error transmission and enhance the efficacy of accuracy design and calibration.

  7. Errors in abdominal computed tomography

    International Nuclear Information System (INIS)

    Stephens, S.; Marting, I.; Dixon, A.K.

    1989-01-01

    Sixty-nine patients are presented in whom a substantial error was made on the initial abdominal computed tomography report. Certain features of these errors have been analysed. In 30 (43.5%) a lesion was simply not recognised (error of observation); in 39 (56.5%) the wrong conclusions were drawn about the nature of normal or abnormal structures (error of interpretation). The 39 errors of interpretation were more complex; in 7 patients an abnormal structure was noted but interpreted as normal, whereas in four a normal structure was thought to represent a lesion. Other interpretive errors included those where the wrong cause for a lesion had been ascribed (24 patients), and those where the abnormality was substantially under-reported (4 patients). Various features of these errors are presented and discussed. Errors were made just as often in relation to small and large lesions. Consultants made as many errors as senior registrar radiologists. It is like that dual reporting is the best method of avoiding such errors and, indeed, this is widely practised in our unit. (Author). 9 refs.; 5 figs.; 1 tab

  8. A Geomagnetic Reference Error Model

    Science.gov (United States)

    Maus, S.; Woods, A. J.; Nair, M. C.

    2011-12-01

    The accuracy of geomagnetic field models, such as the International Geomagnetic Reference Field (IGRF) and the World Magnetic Model (WMM), has benefitted tremendously from the ongoing series of satellite magnetic missions. However, what do we mean by accuracy? When comparing a geomagnetic reference model with a magnetic field measurement (for example of an electronic compass), three contributions play a role: (1) The instrument error, which is not subject of this discussion, (2) the error of commission, namely the error of the model coefficients themselves in representing the geomagnetic main field, and (3) the error of omission, comprising contributions to the geomagnetic field which are not represented in the reference model. The latter can further be subdivided into the omission of the crustal field and the omission of the disturbance field. Several factors have a strong influence on these errors: The error of commission primarily depends on the time elapsed since the last update of the reference model. The omission error for the crustal field depends on altitude of the measurement, while the omission error for the disturbance field has a strong latitudinal dependence, peaking under the auroral electrojets. A further complication arises for the uncertainty in magnetic declination, which is directly dependent on the strength of the horizontal field. Here, we present an error model which takes all of these factors into account. This error model will be implemented as an online-calculator, providing the uncertainty of the magnetic elements at the entered location and time.

  9. The space/time aspect of style figures: Figures of speech, in the 'Golden fleece', by Borislav Pekić

    Directory of Open Access Journals (Sweden)

    Lazić Nebojša J.

    2011-01-01

    Full Text Available Borislav Pekic's seven-volume novel 'Golden Fleece' is the most comprehensive Borislav Pekic's prose text in Serbian literature. In this article, we have analyzed the figures of speech in relation to their function in the macrostructural composition of the novel. We have chosen the following figures of speech (style figures: allegory, irony, symbol, and parabasis. In considering these questions, we referred to the knowledge of the language obtained by philosophy of language and linguistics, as a scientific discipline, in adjacent relation to the science of literature. We referred to the views on the nature of language by Martin Heidegger, Ludwig Wittgenstein, Gadamer Hans-Heorg and Ferdinand de Saussure, believing that they (each within its own system of thinking of the world penetrated deeply into the mystery of language. In short-in the in the systems of minds of all listed thinkers, the language is seen or viewed as a tool, or even as the basis of linguistic communication. Borislav Pekic uses allegorical or ironic statements and structures with a view to expose the hypocrisy in relationships between people, to show that beneath every text, a subtext (that erases everything said before emerges. By using a powerful symbol in the narrative and direct intervention in the text (parabasis, the writer dorects the reader to the conclusion that the novel heroes live in dehumanized world, a world without future.

  10. Sepsis: Medical errors in Poland.

    Science.gov (United States)

    Rorat, Marta; Jurek, Tomasz

    2016-01-01

    Health, safety and medical errors are currently the subject of worldwide discussion. The authors analysed medico-legal opinions trying to determine types of medical errors and their impact on the course of sepsis. The authors carried out a retrospective analysis of 66 medico-legal opinions issued by the Wroclaw Department of Forensic Medicine between 2004 and 2013 (at the request of the prosecutor or court) in cases examined for medical errors. Medical errors were confirmed in 55 of the 66 medico-legal opinions. The age of victims varied from 2 weeks to 68 years; 49 patients died. The analysis revealed medical errors committed by 113 health-care workers: 98 physicians, 8 nurses and 8 emergency medical dispatchers. In 33 cases, an error was made before hospitalisation. Hospital errors occurred in 35 victims. Diagnostic errors were discovered in 50 patients, including 46 cases of sepsis being incorrectly recognised and insufficient diagnoses in 37 cases. Therapeutic errors occurred in 37 victims, organisational errors in 9 and technical errors in 2. In addition to sepsis, 8 patients also had a severe concomitant disease and 8 had a chronic disease. In 45 cases, the authors observed glaring errors, which could incur criminal liability. There is an urgent need to introduce a system for reporting and analysing medical errors in Poland. The development and popularisation of standards for identifying and treating sepsis across basic medical professions is essential to improve patient safety and survival rates. Procedures should be introduced to prevent health-care workers from administering incorrect treatment in cases. © The Author(s) 2015.

  11. Contour Error Map Algorithm

    Science.gov (United States)

    Merceret, Francis; Lane, John; Immer, Christopher; Case, Jonathan; Manobianco, John

    2005-01-01

    The contour error map (CEM) algorithm and the software that implements the algorithm are means of quantifying correlations between sets of time-varying data that are binarized and registered on spatial grids. The present version of the software is intended for use in evaluating numerical weather forecasts against observational sea-breeze data. In cases in which observational data come from off-grid stations, it is necessary to preprocess the observational data to transform them into gridded data. First, the wind direction is gridded and binarized so that D(i,j;n) is the input to CEM based on forecast data and d(i,j;n) is the input to CEM based on gridded observational data. Here, i and j are spatial indices representing 1.25-km intervals along the west-to-east and south-to-north directions, respectively; and n is a time index representing 5-minute intervals. A binary value of D or d = 0 corresponds to an offshore wind, whereas a value of D or d = 1 corresponds to an onshore wind. CEM includes two notable subalgorithms: One identifies and verifies sea-breeze boundaries; the other, which can be invoked optionally, performs an image-erosion function for the purpose of attempting to eliminate river-breeze contributions in the wind fields.

  12. Efficiently characterizing the total error in quantum circuits

    Science.gov (United States)

    Carignan-Dugas, Arnaud; Wallman, Joel J.; Emerson, Joseph

    A promising technological advancement meant to enlarge our computational means is the quantum computer. Such a device would harvest the quantum complexity of the physical world in order to unfold concrete mathematical problems more efficiently. However, the errors emerging from the implementation of quantum operations are likewise quantum, and hence share a similar level of intricacy. Fortunately, randomized benchmarking protocols provide an efficient way to characterize the operational noise within quantum devices. The resulting figures of merit, like the fidelity and the unitarity, are typically attached to a set of circuit components. While important, this doesn't fulfill the main goal: determining if the error rate of the total circuit is small enough in order to trust its outcome. In this work, we fill the gap by providing an optimal bound on the total fidelity of a circuit in terms of component-wise figures of merit. Our bound smoothly interpolates between the classical regime, in which the error rate grows linearly in the circuit's length, and the quantum regime, which can naturally allow quadratic growth. Conversely, our analysis substantially improves the bounds on single circuit element fidelities obtained through techniques such as interleaved randomized benchmarking. This research was supported by the U.S. Army Research Office through Grant W911NF- 14-1-0103, CIFAR, the Government of Ontario, and the Government of Canada through NSERC and Industry Canada.

  13. The Usability-Error Ontology

    DEFF Research Database (Denmark)

    Elkin, Peter L.; Beuscart-zephir, Marie-Catherine; Pelayo, Sylvia

    2013-01-01

    in patients coming to harm. Often the root cause analysis of these adverse events can be traced back to Usability Errors in the Health Information Technology (HIT) or its interaction with users. Interoperability of the documentation of HIT related Usability Errors in a consistent fashion can improve our...... ability to do systematic reviews and meta-analyses. In an effort to support improved and more interoperable data capture regarding Usability Errors, we have created the Usability Error Ontology (UEO) as a classification method for representing knowledge regarding Usability Errors. We expect the UEO...... will grow over time to support an increasing number of HIT system types. In this manuscript, we present this Ontology of Usability Error Types and specifically address Computerized Physician Order Entry (CPOE), Electronic Health Records (EHR) and Revenue Cycle HIT systems....

  14. Statistical errors in Monte Carlo estimates of systematic errors

    International Nuclear Information System (INIS)

    Roe, Byron P.

    2007-01-01

    For estimating the effects of a number of systematic errors on a data sample, one can generate Monte Carlo (MC) runs with systematic parameters varied and examine the change in the desired observed result. Two methods are often used. In the unisim method, the systematic parameters are varied one at a time by one standard deviation, each parameter corresponding to a MC run. In the multisim method (see ), each MC run has all of the parameters varied; the amount of variation is chosen from the expected distribution of each systematic parameter, usually assumed to be a normal distribution. The variance of the overall systematic error determination is derived for each of the two methods and comparisons are made between them. If one focuses not on the error in the prediction of an individual systematic error, but on the overall error due to all systematic errors in the error matrix element in data bin m, the number of events needed is strongly reduced because of the averaging effect over all of the errors. For simple models presented here the multisim model was far better if the statistical error in the MC samples was larger than an individual systematic error, while for the reverse case, the unisim model was better. Exact formulas and formulas for the simple toy models are presented so that realistic calculations can be made. The calculations in the present note are valid if the errors are in a linear region. If that region extends sufficiently far, one can have the unisims or multisims correspond to k standard deviations instead of one. This reduces the number of events required by a factor of k 2

  15. Statistical errors in Monte Carlo estimates of systematic errors

    Science.gov (United States)

    Roe, Byron P.

    2007-01-01

    For estimating the effects of a number of systematic errors on a data sample, one can generate Monte Carlo (MC) runs with systematic parameters varied and examine the change in the desired observed result. Two methods are often used. In the unisim method, the systematic parameters are varied one at a time by one standard deviation, each parameter corresponding to a MC run. In the multisim method (see ), each MC run has all of the parameters varied; the amount of variation is chosen from the expected distribution of each systematic parameter, usually assumed to be a normal distribution. The variance of the overall systematic error determination is derived for each of the two methods and comparisons are made between them. If one focuses not on the error in the prediction of an individual systematic error, but on the overall error due to all systematic errors in the error matrix element in data bin m, the number of events needed is strongly reduced because of the averaging effect over all of the errors. For simple models presented here the multisim model was far better if the statistical error in the MC samples was larger than an individual systematic error, while for the reverse case, the unisim model was better. Exact formulas and formulas for the simple toy models are presented so that realistic calculations can be made. The calculations in the present note are valid if the errors are in a linear region. If that region extends sufficiently far, one can have the unisims or multisims correspond to k standard deviations instead of one. This reduces the number of events required by a factor of k2. The specific terms unisim and multisim were coined by Peter Meyers and Steve Brice, respectively, for the MiniBooNE experiment. However, the concepts have been developed over time and have been in general use for some time.

  16. Statistical errors in Monte Carlo estimates of systematic errors

    Energy Technology Data Exchange (ETDEWEB)

    Roe, Byron P. [Department of Physics, University of Michigan, Ann Arbor, MI 48109 (United States)]. E-mail: byronroe@umich.edu

    2007-01-01

    For estimating the effects of a number of systematic errors on a data sample, one can generate Monte Carlo (MC) runs with systematic parameters varied and examine the change in the desired observed result. Two methods are often used. In the unisim method, the systematic parameters are varied one at a time by one standard deviation, each parameter corresponding to a MC run. In the multisim method (see ), each MC run has all of the parameters varied; the amount of variation is chosen from the expected distribution of each systematic parameter, usually assumed to be a normal distribution. The variance of the overall systematic error determination is derived for each of the two methods and comparisons are made between them. If one focuses not on the error in the prediction of an individual systematic error, but on the overall error due to all systematic errors in the error matrix element in data bin m, the number of events needed is strongly reduced because of the averaging effect over all of the errors. For simple models presented here the multisim model was far better if the statistical error in the MC samples was larger than an individual systematic error, while for the reverse case, the unisim model was better. Exact formulas and formulas for the simple toy models are presented so that realistic calculations can be made. The calculations in the present note are valid if the errors are in a linear region. If that region extends sufficiently far, one can have the unisims or multisims correspond to k standard deviations instead of one. This reduces the number of events required by a factor of k{sup 2}.

  17. Processor register error correction management

    Science.gov (United States)

    Bose, Pradip; Cher, Chen-Yong; Gupta, Meeta S.

    2016-12-27

    Processor register protection management is disclosed. In embodiments, a method of processor register protection management can include determining a sensitive logical register for executable code generated by a compiler, generating an error-correction table identifying the sensitive logical register, and storing the error-correction table in a memory accessible by a processor. The processor can be configured to generate a duplicate register of the sensitive logical register identified by the error-correction table.

  18. Dissection of Drosophila Visual Circuits Implicative in Figure Motion

    Science.gov (United States)

    Kelley, Ross G.

    The Drosophila visual system offers a model to study the foundations of how motion signals are computed from raw visual input and transformed into behavioral output. My studies focus on how specific cells in the Drosophila nervous system implement this input-output transformation. The individual cell types are known from classical studies using Golgi impregnations, but the assembly of motion processing circuits and the behavioral outputs remain poorly understood. Using an electronic flight simulator for flies and a white-noise analysis developed by Aptekar et al., I screen specific neurons in the optic lobes for behavioral ramifications. This approach produces wing responses to both the spatial and temporal dynamics of motion signals. The results of these experiments give Spatiotemporal Action Fields (STAFs) across the entire visual panorama. Genetically inactivating a distinct grouping of cells in the third optic ganglion, the Lobula Plate, the Horizontal System (HS) cell group, produced a robust phenotype through STAF analysis. Using the Gal4-UAS transgene expression system, we selectively inactivated the HS cells by expressing in their membrane inward rectifying potassium channels (Kir2.1) to hyperpolarize these cells, preventing their role in synaptic signaling. The results of the experiments show mutants lose steering responses to several distinct categories of figure motion and reduced behavioral responses to figure motion set against a contrasting moving background, highlighting their role in figure tracking behavior. Finally, a synapse inactivating protein, tetanus toxin (TNT), expressed in the HS cell group, produces a different behavioral phenotype than overexpressing inward rectifier. TNT, a bacterial neurotoxin, cleaves SNARE proteins resulting in loss of synaptic output of the cell, but the dendrites are intact and signal normally, preserving dendro-dendritic interactions known to sculpt the visual receptive fields of these cells. The two distinct

  19. Antimicrobial 3D Porous Scaffolds Prepared by Additive Manufacturing and Breath Figures.

    Science.gov (United States)

    Vargas-Alfredo, Nelson; Dorronsoro, Ane; Cortajarena, Aitziber L; Rodríguez-Hernández, Juan

    2017-10-25

    We describe herein a novel strategy for the fabrication of efficient 3D printed antibacterial scaffolds. For this purpose, both the surface topography as well as the chemical composition of 3D scaffolds fabricated by additive manufacturing were modified. The scaffolds were fabricated by fused deposition modeling (FDM) using high-impact polystyrene (HIPS) filaments. The surface of the objects was then topographically modified providing materials with porous surfaces by means of the Breath Figures approach. The strategy involves the immersion of the scaffold in a polymer solution during a precise period of time. This approach permitted the modification of the pore size varying the immersion time as well as the solution concentration. Moreover, by using polymer blend solutions of polystyrene and polystyrene-b-poly(acrylic acid) (PS 23 -b-PAA 18 ) and a quaternized polystyrene-b-poly(dimethylaminoethyl methacrylate) (PS 42 -b-PDMAEMAQ 17 ), the scaffolds were simultaneously chemically modified. The surfaces were characterized by scanning electron microscopy and infrared spectroscopy. Finally, the biological response toward bacteria was explored. Porous surfaces prepared using quaternized PDMAEMA as well as those prepared using PAA confer antimicrobial activity to the films, i.e., were able to kill on contact Staphylococcus aureus employed as model bacteria.

  20. Error estimation for pattern recognition

    CERN Document Server

    Braga Neto, U

    2015-01-01

    This book is the first of its kind to discuss error estimation with a model-based approach. From the basics of classifiers and error estimators to more specialized classifiers, it covers important topics and essential issues pertaining to the scientific validity of pattern classification. Additional features of the book include: * The latest results on the accuracy of error estimation * Performance analysis of resubstitution, cross-validation, and bootstrap error estimators using analytical and simulation approaches * Highly interactive computer-based exercises and end-of-chapter problems

  1. Heuristic errors in clinical reasoning.

    Science.gov (United States)

    Rylander, Melanie; Guerrasio, Jeannette

    2016-08-01

    Errors in clinical reasoning contribute to patient morbidity and mortality. The purpose of this study was to determine the types of heuristic errors made by third-year medical students and first-year residents. This study surveyed approximately 150 clinical educators inquiring about the types of heuristic errors they observed in third-year medical students and first-year residents. Anchoring and premature closure were the two most common errors observed amongst third-year medical students and first-year residents. There was no difference in the types of errors observed in the two groups. Errors in clinical reasoning contribute to patient morbidity and mortality Clinical educators perceived that both third-year medical students and first-year residents committed similar heuristic errors, implying that additional medical knowledge and clinical experience do not affect the types of heuristic errors made. Further work is needed to help identify methods that can be used to reduce heuristic errors early in a clinician's education. © 2015 John Wiley & Sons Ltd.

  2. Medication Errors in Outpatient Pediatrics.

    Science.gov (United States)

    Berrier, Kyla

    2016-01-01

    Medication errors may occur during parental administration of prescription and over-the-counter medications in the outpatient pediatric setting. Misinterpretation of medication labels and dosing errors are two types of errors in medication administration. Health literacy may play an important role in parents' ability to safely manage their child's medication regimen. There are several proposed strategies for decreasing these medication administration errors, including using standardized dosing instruments, using strictly metric units for medication dosing, and providing parents and caregivers with picture-based dosing instructions. Pediatric healthcare providers should be aware of these strategies and seek to implement many of them into their practices.

  3. [DIAGNOSTIC ERRORS IN INTERNAL MEDICINE].

    Science.gov (United States)

    Schattner, Ami

    2017-02-01

    Diagnostic errors remain an important target in improving the quality of care and achieving better health outcomes. With a relatively steady rate estimated at 10-15% in many settings, research aiming to elucidate mechanisms of error is highly important. Results indicate that not only cognitive mistakes but a number of factors acting together often culminate in a diagnostic error. Far from being 'unpreventable', several methods and techniques are suggested that may show promise in minimizing diagnostic errors. These measures should be further investigated and incorporated into all phases of medical education.

  4. Identifying Error in AUV Communication

    National Research Council Canada - National Science Library

    Coleman, Joseph; Merrill, Kaylani; O'Rourke, Michael; Rajala, Andrew G; Edwards, Dean B

    2006-01-01

    Mine Countermeasures (MCM) involving Autonomous Underwater Vehicles (AUVs) are especially susceptible to error, given the constraints on underwater acoustic communication and the inconstancy of the underwater communication channel...

  5. Figures of merit for measuring aging management program effectiveness

    International Nuclear Information System (INIS)

    Knudson, R.; Sciacca, F.; Walsh, R.; Zigler, G.

    1991-01-01

    One of the requirements for nuclear plant license renewal may be the establishment and demonstration of an effective aging management program. An analysis of both qualitative and quantitative information will be required to define the contents of this aging management program. The authors propose two quantitative figures of merit, Mean Event Detection Frequency and Mean Renewal Rate, that can be used to compare the effectiveness of various inspection, surveillance, test, and monitoring (ISTM) activities for aging mitigation. An example showing the relative effectiveness of an enhanced Loose Parts Monitoring System with current ISTM activities for steam generators and reactor internals is provided. (author)

  6. Panteon heraldických figur jako cesta k logotypu

    OpenAIRE

    MACOUN, Ondřej

    2013-01-01

    Abstract In my thesis, I am dealing with heraldry as a sciense of two worlds. There is an introduction as well as its historical function in the first chapter. It?s origin, evolution in time and value for modern society along with the basic rules for creation of crests as heraldry artifacts is listed here as well. In the next chapter, heraldry is defined as a specific form of art with fixed and stable order. Part of the work is a convolute consisting ten drawn pictures of heraldic figures, wh...

  7. Entreprenøren som figur under neoliberalismen

    DEFF Research Database (Denmark)

    Langergaard, Luise Li

    2016-01-01

    The article explores the central role of the entrepreneur in neoliberalism. It demonstrates how a displacement and a broadening of the concept of the entrepreneur occur in the neoliberal interpretation of the entrepreneur compared to Schumpeter’s economic innovation theory. From being a specific...... economic figure with a particular delimited function the entrepreneur is reinterpreted as, on the one hand, a particular type of subject, the entrepreneur of the self, and on the other, an ism, entrepreneurialism, which permeates individuals, society, and institutions. Entrepreneurialism is discussed...

  8. Figures of Speech as Semantic Operators in the Innovation Process

    DEFF Research Database (Denmark)

    Dell’Era, Claudio; Buganza, Tommaso; Verganti, Roberto

    2011-01-01

    Purpose – Product functionalities aim to satisfy the operative needs of the customer, while product meanings (i.e. the emotion and the symbolic values represented by the product) aim to satisfy the emotional and socio-cultural needs of the customer. What consumers are increasingly looking......, the authors propose the “Rhetorical Innovation Process” as a methodology that foresees the application of figures of speech as semantic operators. First, the authors discuss several product innovations that can be interpreted according to the “Rhetorical Innovation Process”. Then, a brief workshop assignment...

  9. Figure del desiderio: l'amore fra distruzione e sublime

    Directory of Open Access Journals (Sweden)

    Mabel Franzone

    2005-03-01

    Full Text Available Attraverso due racconti di Cortázar, l'analisi di due figure del desiderio ci permette esplorare due estremi seguendo una verticalità. La distruzione, doppio tenebroso della nostra anima, ci rivela un erotismo legato alla morte e al desiderio morboso di possedere l'Altro; il suo contraltare è un'ascesa vertiginosa accompagnata da un godimento estetico, dall'amore sublime prossimo all'esperienza mistica che si concluderà con una discesa progressiva e nel rispetto di questo Altro. La creazione letteraria si presenta come uno sfogo alle nostre angosce, che sono anche una sorta d'espressione dell'erotismo.

  10. A Hybrid Unequal Error Protection / Unequal Error Resilience ...

    African Journals Online (AJOL)

    The quality layers are then assigned an Unequal Error Resilience to synchronization loss by unequally allocating the number of headers available for synchronization to them. Following that Unequal Error Protection against channel noise is provided to the layers by the use of Rate Compatible Punctured Convolutional ...

  11. Measurement Error and Equating Error in Power Analysis

    Science.gov (United States)

    Phillips, Gary W.; Jiang, Tao

    2016-01-01

    Power analysis is a fundamental prerequisite for conducting scientific research. Without power analysis the researcher has no way of knowing whether the sample size is large enough to detect the effect he or she is looking for. This paper demonstrates how psychometric factors such as measurement error and equating error affect the power of…

  12. Study on error analysis and accuracy improvement for aspheric profile measurement

    Science.gov (United States)

    Gao, Huimin; Zhang, Xiaodong; Fang, Fengzhou

    2017-06-01

    Aspheric surfaces are important to the optical systems and need high precision surface metrology. Stylus profilometry is currently the most common approach to measure axially symmetric elements. However, if the asphere has the rotational alignment errors, the wrong cresting point would be located deducing the significantly incorrect surface errors. This paper studied the simulated results of an asphere with rotational angles around X-axis and Y-axis, and the stylus tip shift in X, Y and Z direction. Experimental results show that the same absolute value of rotational errors around X-axis would cause the same profile errors and different value of rotational errors around Y-axis would cause profile errors with different title angle. Moreover, the greater the rotational errors, the bigger the peak-to-valley value of profile errors. To identify the rotational angles in X-axis and Y-axis, the algorithms are performed to analyze the X-axis and Y-axis rotational angles respectively. Then the actual profile errors with multiple profile measurement around X-axis are calculated according to the proposed analysis flow chart. The aim of the multiple measurements strategy is to achieve the zero position of X-axis rotational errors. Finally, experimental results prove the proposed algorithms achieve accurate profile errors for aspheric surfaces avoiding both X-axis and Y-axis rotational errors. Finally, a measurement strategy for aspheric surface is presented systematically.

  13. INFLUENCE OF MECHANICAL ERRORS IN A ZOOM CAMERA

    Directory of Open Access Journals (Sweden)

    Alfredo Gardel

    2011-05-01

    Full Text Available As it is well known, varying the focus and zoom of a camera lens system changes the alignment of the lens components resulting in a displacement of the image centre and field of view. Thus, knowledge of how the image centre shifts may be important for some aspects of camera calibration. As shown in other papers, the pinhole model is not adequate for zoom lenses. To ensure a calibration model for these lenses, the calibration parameters must be adjusted. The geometrical modelling of a zoom lens is realized from its lens specifications. The influence on the calibration parameters is calculated by introducing mechanical errors in the mobile lenses. Figures are given describing the errors obtained in the principal point coordinates and also in its standard deviation. A comparison is then made with the errors that come from the incorrect detection of the calibration points. It is concluded that mechanical errors of actual zoom lenses can be neglected in the calibration process because detection errors have more influence on the camera parameters.

  14. Interaction of bottom-up and top-down processes in the perception of ambiguous figures.

    Science.gov (United States)

    Intaitė, Monika; Noreika, Valdas; Šoliūnas, Alvydas; Falter, Christine M

    2013-08-30

    Ambiguous figures reverse their appearance during prolonged viewing and can be perceived in two (or more) available interpretations. Both physical stimulus manipulations and cognitive control influence the perception of ambiguous figures, but the underlying mechanisms remain poorly understood. In the current study, the perception of an ambiguous figure was manipulated by adaptation to unambiguous figures and/or placing the ambiguous figure into a context of unambiguous figures. Our results indicate that both adaptation and context can effectively modulate perception of the ambiguous figure. When manipulated together, adaptation and context processes showed additive effects upon the perception of the ambiguous figure implying the independent mechanisms. Thus, top-down and bottom-up processes seem to influence the perception of the ambiguous figures independently and neither seems to be uniquely responsible for the generation of perceptual changes. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Health figures: an open source JavaScript library for health data visualization.

    Science.gov (United States)

    Ledesma, Andres; Al-Musawi, Mohammed; Nieminen, Hannu

    2016-03-22

    The way we look at data has a great impact on how we can understand it, particularly when the data is related to health and wellness. Due to the increased use of self-tracking devices and the ongoing shift towards preventive medicine, better understanding of our health data is an important part of improving the general welfare of the citizens. Electronic Health Records, self-tracking devices and mobile applications provide a rich variety of data but it often becomes difficult to understand. We implemented the hFigures library inspired on the hGraph visualization with additional improvements. The purpose of the library is to provide a visual representation of the evolution of health measurements in a complete and useful manner. We researched the usefulness and usability of the library by building an application for health data visualization in a health coaching program. We performed a user evaluation with Heuristic Evaluation, Controlled User Testing and Usability Questionnaires. In the Heuristics Evaluation the average response was 6.3 out of 7 points and the Cognitive Walkthrough done by usability experts indicated no design or mismatch errors. In the CSUQ usability test the system obtained an average score of 6.13 out of 7, and in the ASQ usability test the overall satisfaction score was 6.64 out of 7. We developed hFigures, an open source library for visualizing a complete, accurate and normalized graphical representation of health data. The idea is based on the concept of the hGraph but it provides additional key features, including a comparison of multiple health measurements over time. We conducted a usability evaluation of the library as a key component of an application for health and wellness monitoring. The results indicate that the data visualization library was helpful in assisting users in understanding health data and its evolution over time.

  16. Error begat error: design error analysis and prevention in social infrastructure projects.

    Science.gov (United States)

    Love, Peter E D; Lopez, Robert; Edwards, David J; Goh, Yang M

    2012-09-01

    Design errors contribute significantly to cost and schedule growth in social infrastructure projects and to engineering failures, which can result in accidents and loss of life. Despite considerable research that has addressed their error causation in construction projects they still remain prevalent. This paper identifies the underlying conditions that contribute to design errors in social infrastructure projects (e.g. hospitals, education, law and order type buildings). A systemic model of error causation is propagated and subsequently used to develop a learning framework for design error prevention. The research suggests that a multitude of strategies should be adopted in congruence to prevent design errors from occurring and so ensure that safety and project performance are ameliorated. Copyright © 2011. Published by Elsevier Ltd.

  17. Medication errors in hospitalised children.

    Science.gov (United States)

    Manias, Elizabeth; Kinney, Sharon; Cranswick, Noel; Williams, Allison

    2014-01-01

    This study aims to explore the characteristics of reported medication errors occurring among children in an Australian children's hospital, and to examine the types, causes and contributing factors of medication errors. A retrospective clinical audit was undertaken of medication errors reported to an online incident facility at an Australian children's hospital over a 4-year period. A total of 2753 medication errors were reported over the 4-year period, with an overall medication error rate of 0.31% per combined admission and presentation, or 6.58 medication errors per 1000 bed days. The two most common severity outcomes were: the medication error occurred before it reached the child (n = 749, 27.2%); and the medication error reached the child who required monitoring to confirm that it resulted in no harm (n = 1519, 55.2%). Common types of medication errors included overdose (n = 579, 21.0%) and dose omission (n = 341, 12.4%). The most common cause relating to communication involved misreading or not reading medication orders (n = 804, 29.2%). Key contributing factors involved communication relating to children's transfer across different clinical settings (n = 929, 33.7%) and the lack of following policies and procedures (n = 617, 22.4%). More than half of the reports (72.5%) were made by nurses. Future research should focus on implementing and evaluating strategies aimed at reducing medication errors relating to analgesics, anti-infectives, cardiovascular agents, fluids and electrolytes and anticlotting agents, as they are consistently represented in the types of medication errors that occur. Greater attention needs to be placed on supporting health professionals in managing these medications. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  18. Ultraspectral Sounding Retrieval Error Budget and Estimation

    Science.gov (United States)

    Zhou, Daniel K.; Larar, Allen M.; Liu, Xu; Smith, William L.; Strow, L. Larrabee; Yang, Ping

    2011-01-01

    The ultraspectral infrared radiances obtained from satellite observations provide atmospheric, surface, and/or cloud information. The intent of the measurement of the thermodynamic state is the initialization of weather and climate models. Great effort has been given to retrieving and validating these atmospheric, surface, and/or cloud properties. Error Consistency Analysis Scheme (ECAS), through fast radiative transfer model (RTM) forward and inverse calculations, has been developed to estimate the error budget in terms of absolute and standard deviation of differences in both spectral radiance and retrieved geophysical parameter domains. The retrieval error is assessed through ECAS without assistance of other independent measurements such as radiosonde data. ECAS re-evaluates instrument random noise, and establishes the link between radiometric accuracy and retrieved geophysical parameter accuracy. ECAS can be applied to measurements of any ultraspectral instrument and any retrieval scheme with associated RTM. In this paper, ECAS is described and demonstration is made with the measurements of the METOP-A satellite Infrared Atmospheric Sounding Interferometer (IASI)..

  19. Climate, air and energy - Release 2015 - Key figures

    International Nuclear Information System (INIS)

    2016-05-01

    After an indication of some remarkable key figures (general data, data about office building, housing, industries, renewable energies, wastes, transports, agriculture and forests, and households, indication of some French and European objectives for 2020 and 2030), and a table containing indications of some international official texts (Kyoto protocol and its amendment, European directives) and of their content and scope (bio-fuels in transports, energy efficiency, buildings, labelling and eco-design, transports, renewable energies, energy and climate, greenhouse gas emissions and adaptation, air quality, wastes), and national texts (laws, plans) regarding the same issues, this publication presents figures and data under the form of graphs and tables to illustrate their evolution. They are general data on energy consumptions and intensities (data per sector and per country in Europe), markets and jobs related to renewable energies, certificates of energy saving, greenhouse gas emissions and climate change, regional data for France. The other chapters present large sets of graphs and tables of relevant data concerning housing buildings, office buildings, transports, industries, agriculture and forests, renewable energies and heat networks, wastes, and households. Generally, these data are presented in terms of evolution since the 1970's or the 1990's. They propose a detailed analytical point of view of the various energy and energy-related issues in these different sectors and fields

  20. Metaphorically speaking: cognitive abilities and the production of figurative language.

    Science.gov (United States)

    Beaty, Roger E; Silvia, Paul J

    2013-02-01

    Figurative language is one of the most common expressions of creative behavior in everyday life. However, the cognitive mechanisms behind figures of speech such as metaphors remain largely unexplained. Recent evidence suggests that fluid and executive abilities are important to the generation of conventional and creative metaphors. The present study investigated whether several factors of the Cattell-Horn-Carroll model of intelligence contribute to generating these different types of metaphors. Specifically, the roles of fluid intelligence (Gf), crystallized intelligence (Gc), and broad retrieval ability (Gr) were explored. Participants completed a series of intelligence tests and were asked to produce conventional and creative metaphors. Structural equation modeling was used to assess the contribution of the different factors of intelligence to metaphor production. For creative metaphor, there were large effects of Gf (β = .45) and Gr (β = .52); for conventional metaphor, there was a moderate effect of Gc (β = .30). Creative and conventional metaphors thus appear to be anchored in different patterns of abilities: Creative metaphors rely more on executive processes, whereas conventional metaphors primarily draw from acquired vocabulary knowledge.

  1. Beyond the dichotomy of figurative and abstract art in hospitals

    DEFF Research Database (Denmark)

    Nielsen, Stine Maria Louring; Mullins, Michael Finbarr

    2017-01-01

    Within the evidence-based design discourse, and deriving particularly from the theory of emotional congruence, abstract art has been indicated as unsuitable for hospitals. As patients may often experience unfamiliarity, vulnerability, stress, unpredictability and uneasiness in hospitals, these ne......Within the evidence-based design discourse, and deriving particularly from the theory of emotional congruence, abstract art has been indicated as unsuitable for hospitals. As patients may often experience unfamiliarity, vulnerability, stress, unpredictability and uneasiness in hospitals...... experiments. Six experiential domains are employed to understand the notion of experience of ‘well-being’: Space, Time, Inter-subjectivity, Body, Mood and Personal identity. The hypothesis that the ambiguity of abstract art leads to stressful effects is not confirmed by the study’s findings. The studies...... are developed to qualify current guidelines for the application of art, which emphasize a dichotomy between figurative and abstract art. While confirming the positive effects of figurative art, the studies indicate that the ambiguity of meaning in abstract compositions can also facilitate patients’ memories...

  2. Surreal and Canny Selves: Photographic Figures in Claude Cahun

    Directory of Open Access Journals (Sweden)

    Gayle Zachmann

    2003-06-01

    Full Text Available In her 1975 essay, Le Rire de la méduse , Hélène Cixous enthusiastically announced that it was high time for women to enter into discourse. A full half-century earlier, Claude Cahun (1894-1954, a powerful writer and a haunting photographer and artist, was already inscribing herself, Woman, and a woman's voice in visual and verbal self-portraits, photomontages, prose texts, poetry, and aesthetic and political treatises. Cahun's uncanny interventions in both verbal and visual discourse cannily interrogate conventions of literary and pictorial representation and the constructions of self, gender and culture that they exhibit. Insistently asking readers and spectators, "What's wrong with this picture?," her carnivalesque play with the doxa and the politics of identity, destabilizes not only gender and genre norms, but the boundaries and distinctions between visual and verbal representation. Surreal and Canny Selves explores the aesthetic frameworks of writer/artist Claude Cahun. Elucidating how Cahun's questioning of her self and Surrealist representations of woman were part of a much more expansive adventure that questioned more than femininity—the manuscript moves on to trace how and what Cahun's foregrounding of figuration and, more specifically, photographic figuration, might signify for the uncanny aesthetic practices deployed in the hybrid text Aveux non avenus .

  3. Human Error: A Concept Analysis

    Science.gov (United States)

    Hansen, Frederick D.

    2007-01-01

    Human error is the subject of research in almost every industry and profession of our times. This term is part of our daily language and intuitively understood by most people however, it would be premature to assume that everyone's understanding of human error s the same. For example, human error is used to describe the outcome or consequence of human action, the causal factor of an accident, deliberate violations,a nd the actual action taken by a human being. As a result, researchers rarely agree on the either a specific definition or how to prevent human error. The purpose of this article is to explore the specific concept of human error using Concept Analysis as described by Walker and Avant (1995). The concept of human error is examined as currently used in the literature of a variety of industries and professions. Defining attributes and examples of model, borderline, and contrary cases are described. The antecedents and consequences of human error are also discussed and a definition of human error is offered.

  4. Dual Processing and Diagnostic Errors

    Science.gov (United States)

    Norman, Geoff

    2009-01-01

    In this paper, I review evidence from two theories in psychology relevant to diagnosis and diagnostic errors. "Dual Process" theories of thinking, frequently mentioned with respect to diagnostic error, propose that categorization decisions can be made with either a fast, unconscious, contextual process called System 1 or a slow, analytical,…

  5. Error Detection in Numeric Codes

    Indian Academy of Sciences (India)

    Admin

    example, entering a wrong ISBN may result in purchase of a different book, entering a wrong debit card number may result in a debit from a wrong bank account. So, it is very important that these errors are detected during data entry so that the codes are rejected and the user cautioned. It is for this purpose that many error ...

  6. Barriers to Medical Error Reporting.

    Science.gov (United States)

    Poorolajal, Jalal; Rezaie, Shirin; Aghighi, Negar

    2015-01-01

    This study was conducted to explore the prevalence of medical error underreporting and associated barriers. This cross-sectional study was performed from September to December 2012. Five hospitals, affiliated with Hamadan University of Medical Sciences, in Hamedan, Iran were investigated. A self-administered questionnaire was used for data collection. Participants consisted of physicians, nurses, midwives, residents, interns, and staffs of radiology and laboratory departments. Overall, 50.26% of subjects had committed but not reported medical errors. The main reasons mentioned for underreporting were lack of effective medical error reporting system (60.0%), lack of proper reporting form (51.8%), lack of peer supporting a person who has committed an error (56.0%), and lack of personal attention to the importance of medical errors (62.9%). The rate of committing medical errors was higher in men (71.4%), age of 50-40 years (67.6%), less-experienced personnel (58.7%), educational level of MSc (87.5%), and staff of radiology department (88.9%). This study outlined the main barriers to reporting medical errors and associated factors that may be helpful for healthcare organizations in improving medical error reporting as an essential component for patient safety enhancement.

  7. Barriers to medical error reporting

    Directory of Open Access Journals (Sweden)

    Jalal Poorolajal

    2015-01-01

    Full Text Available Background: This study was conducted to explore the prevalence of medical error underreporting and associated barriers. Methods: This cross-sectional study was performed from September to December 2012. Five hospitals, affiliated with Hamadan University of Medical Sciences, in Hamedan,Iran were investigated. A self-administered questionnaire was used for data collection. Participants consisted of physicians, nurses, midwives, residents, interns, and staffs of radiology and laboratory departments. Results: Overall, 50.26% of subjects had committed but not reported medical errors. The main reasons mentioned for underreporting were lack of effective medical error reporting system (60.0%, lack of proper reporting form (51.8%, lack of peer supporting a person who has committed an error (56.0%, and lack of personal attention to the importance of medical errors (62.9%. The rate of committing medical errors was higher in men (71.4%, age of 50-40 years (67.6%, less-experienced personnel (58.7%, educational level of MSc (87.5%, and staff of radiology department (88.9%. Conclusions: This study outlined the main barriers to reporting medical errors and associated factors that may be helpful for healthcare organizations in improving medical error reporting as an essential component for patient safety enhancement.

  8. Error analysis of large aperture static interference imaging spectrometer

    Science.gov (United States)

    Li, Fan; Zhang, Guo

    2015-12-01

    Large Aperture Static Interference Imaging Spectrometer is a new type of spectrometer with light structure, high spectral linearity, high luminous flux and wide spectral range, etc ,which overcomes the contradiction between high flux and high stability so that enables important values in science studies and applications. However, there're different error laws in imaging process of LASIS due to its different imaging style from traditional imaging spectrometers, correspondingly, its data processing is complicated. In order to improve accuracy of spectrum detection and serve for quantitative analysis and monitoring of topographical surface feature, the error law of LASIS imaging is supposed to be learned. In this paper, the LASIS errors are classified as interferogram error, radiometric correction error and spectral inversion error, and each type of error is analyzed and studied. Finally, a case study of Yaogan-14 is proposed, in which the interferogram error of LASIS by time and space combined modulation is mainly experimented and analyzed, as well as the errors from process of radiometric correction and spectral inversion.

  9. A theory of human error

    Science.gov (United States)

    Mcruer, D. T.; Clement, W. F.; Allen, R. W.

    1981-01-01

    Human errors tend to be treated in terms of clinical and anecdotal descriptions, from which remedial measures are difficult to derive. Correction of the sources of human error requires an attempt to reconstruct underlying and contributing causes of error from the circumstantial causes cited in official investigative reports. A comprehensive analytical theory of the cause-effect relationships governing propagation of human error is indispensable to a reconstruction of the underlying and contributing causes. A validated analytical theory of the input-output behavior of human operators involving manual control, communication, supervisory, and monitoring tasks which are relevant to aviation, maritime, automotive, and process control operations is highlighted. This theory of behavior, both appropriate and inappropriate, provides an insightful basis for investigating, classifying, and quantifying the needed cause-effect relationships governing propagation of human error.

  10. Onorbit IMU alignment error budget

    Science.gov (United States)

    Corson, R. W.

    1980-01-01

    The Star Tracker, Crew Optical Alignment Sight (COAS), and Inertial Measurement Unit (IMU) from a complex navigation system with a multitude of error sources were combined. A complete list of the system errors is presented. The errors were combined in a rational way to yield an estimate of the IMU alignment accuracy for STS-1. The expected standard deviation in the IMU alignment error for STS-1 type alignments was determined to be 72 arc seconds per axis for star tracker alignments and 188 arc seconds per axis for COAS alignments. These estimates are based on current knowledge of the star tracker, COAS, IMU, and navigation base error specifications, and were partially verified by preliminary Monte Carlo analysis.

  11. The effect analysis of conic coefficient error based on data measured from Talysurf and simulation of Zernike coefficients

    Science.gov (United States)

    Kai, Jiang; Liu, Kai; Song, Chong; Peng, Qiu; Peng, Wang; Li, Gang

    2016-09-01

    Derivation of the conic coefficient error of practical aspheric optic surface is quite significant to aspheric machining accuracy, optical system imaging quality analysis and decomposition analysis of optical lenses. The primary mirror of R-c telescope system was tested by Taylor Hobson Talysurf. The practical surface was fitted using Zernike polynomials based on the date measured from Talysurf. Though taking the Zernike coefficients into the optical system, the effect of the aberration which was brought by optical machining to the optical system imaging quality was obtained. The analysis shows that the spherical aberration was brought into the optical system because of the figure error of the primary mirror. And the value of the spherical aberration was same to the practical alignment result. Then the conicoid aspherical degree of the primary mirror was tested by the Talysurf. The machining deviation of the conic coefficient was gotten though comparing the conicoid aspherical degree of the practical primary mirror with that of the perfect primary mirror. The practical conic coefficient was calculated by the deviation. Taking the practical conic coefficient into the R-c telescope system, the degradation of the optical system imaging quality was known. Also the spherical aberration was brought into the optical system. Experimental results show that the value of the spherical aberration analyzed by the two methods is same and consist with the practical alignment result. That is to say that the conic coefficient changed due to machining error of the conicoid aspherical degree. Because of the change the spherical aberration was attached to primary mirror. And which caused the optical system imaging quality declined. Finally, corrector was designed to balance the spherical aberration of the primary mirror. Ensure that the optical system imaging quality meet the requirement.

  12. Error sources in atomic force microscopy for dimensional measurements: Taxonomy and modeling

    DEFF Research Database (Denmark)

    Marinello, F.; Voltan, A.; Savio, E.

    2010-01-01

    : scanning system, tip-surface interaction, environment, and data processing. The discussed errors include scaling effects, squareness errors, hysteresis, creep, tip convolution, and thermal drift. A mathematical model of the measurement system is eventually described, as a reference basis for errors...

  13. Article Errors in the English Writing of Saudi EFL Preparatory Year Students

    Science.gov (United States)

    Alhaisoni, Eid; Gaudel, Daya Ram; Al-Zuoud, Khalid M.

    2017-01-01

    This study aims at providing a comprehensive account of the types of errors produced by Saudi EFL students enrolled in the preparatory year programe in their use of articles, based on the Surface Structure Taxonomies (SST) of errors. The study describes the types, frequency and sources of the definite and indefinite article errors in writing…

  14. Recall of figure "A" of the Bender-Gestalt test among delinquents.

    Science.gov (United States)

    Even, A; Kipper, D A; Yehuda, S

    1988-11-01

    The Bender-Gestalt test was administered to 182 Israeli adolescent males: four groups of juvenile delinquents and two of nondelinquent high-school students. Each of the delinquent groups was administered one of the following versions: a standard administration with figure A first (n = 60), a change of sequence with figure A last (n = 22), a regular sequence with figure A changed to two adjacing circles (n = 20), and with figure A changed to two adjacent diamonds (n = 20). One nondelinquent group took the test under standard administration with figure A first (n = 30), and one took it with figure A last (n = 20). The results showed significantly low recall of the original figure A by delinquents when it appeared first. This phenomenon was related to both primary effect and the design depicted in figure A, with a greater influence of the latter. Difficulties in integration were suggested as inhibiting delinquents' recall.

  15. Interaction of bottom-up and top-down processes in the perception of ambiguous figures

    NARCIS (Netherlands)

    Intaite, Monika; Noreika, Valdas; Soliunas, Alvydas; Falter, Christine M.

    2013-01-01

    Ambiguous figures reverse their appearance during prolonged viewing and can be perceived in two (or more) available interpretations. Both physical stimulus manipulations and cognitive control influence the perception of ambiguous figures, but the underlying mechanisms remain poorly understood. In

  16. The Figures of Speech, "Ethos," and Aristotle: Notes toward a Rhetoric of Business Communication.

    Science.gov (United States)

    Kallendorf, Craig; Kallendorf, Carol

    1985-01-01

    Demonstrates that business writers rely far more heavily than expected on classical figures of speech. Uses Aristotle's "Rhetoric" to show that figures of speech offer a powerful tool for the persuasive function of modern business communication. (PD)

  17. Figures of merit for the evaluation of regenerative power converters

    CERN Document Server

    AUTHOR|(CDS)2083258; Rossini, Stefano; Le Godec, Gilles; Papastergiou, Konstantinos; Carrica, Daniel; Retegui, Rogeli Garcia

    2016-01-01

    In some applications, like those for particle accelerators and transfer lines, electromagnet loads operate in cycling mode i.e. absorbing or extracting energy from or to a power source. Built-in energy storage such as electrochemical capacitors can be used whose lifetime is heavily depended on the current ripple and depth of discharge. Moreover, the sizing of this storage element is a trade-off between power taken from the grid and energy stored. Additionally, the adopted power conversion structure and control strategy impact on such decision process. In this work, a number of topologies have been evaluated for these applications and the key metrics used to compare them. The proposed figures of merit are used through examples to highlight the trade-offs related with the choice of dc-bus regulation topology and control strategy.

  18. Optimization principles and the figure of merit for triboelectric generators.

    Science.gov (United States)

    Peng, Jun; Kang, Stephen Dongmin; Snyder, G Jeffrey

    2017-12-01

    Energy harvesting with triboelectric nanogenerators is a burgeoning field, with a growing portfolio of creative application schemes attracting much interest. Although power generation capabilities and its optimization are one of the most important subjects, a satisfactory elemental model that illustrates the basic principles and sets the optimization guideline remains elusive. We use a simple model to clarify how the energy generation mechanism is electrostatic induction but with a time-varying character that makes the optimal matching for power generation more restrictive. By combining multiple parameters into dimensionless variables, we pinpoint the optimum condition with only two independent parameters, leading to predictions of the maximum limit of power density, which allows us to derive the triboelectric material and device figure of merit. We reveal the importance of optimizing device capacitance, not only load resistance, and minimizing the impact of parasitic capacitance. Optimized capacitances can lead to an overall increase in power density of more than 10 times.

  19. Unheimlich. From Wax Figures to the Uncanny Valley

    Directory of Open Access Journals (Sweden)

    Pietro Conte

    2012-01-01

    Full Text Available In his pioneering History of Portraiture in Wax, Julius von Schlosser traced back the age-old history of a material which at that time seemed to be already antiquated, if not obsolete. Wax sculptures were rejected and ousted from art history because of their excessive similarity and adherence to models. One hundred years later, however, hyperrealism got its revenge with Maurizio Cattelan’s celebrated hanging children. Moving from that controversial artwork and focusing on the heated polemics over it, my paper will address the question of the well-known Unheimlichkeit of wax figures, investigated by Ernst Jentsch and Sigmund Freud in the early Twentieth Century and nowadays becoming increasingly topical thanks to the recent debate about the existence and nature of the so called Uncanny Valley.

  20. Renewables in figures. National and international trends in 2014

    International Nuclear Information System (INIS)

    2015-08-01

    This publication provides information for the fields electricity / heat / fuels in detail on the expansion of renewable energies and illustrates this with tables and graphs. Basis of the data are the results of the Working Group on Renewable Energy Sources Statistics (AGEE-Stat), on behalf of the BMWi working out the balance of renewable energy in Germany. In addition you will also find information about Renewable Energy Law and to promote renewable Energy for heating purposes as well as for research and Development. In addition to the figures for Germany are also developments in the use of renewable energy in the European Union documented which also has set ambitious targets. Data for global Development are also included. [de

  1. Energy predictions. [Briefs on 33 charts, figures, and graphs

    Energy Technology Data Exchange (ETDEWEB)

    Freiwald, D.A.

    1977-01-01

    Briefs describe 33 charts, graphs, and schematics offering some recent history and perspectives on the world and U.S. energy situation and the problems for survival facing the world. Of interest is Figure 28, showing the Club of Rome's model of the earth in terms of resource consumption, food, money, people, pollution, etc. A computer was asked to extend recent history into the future and results indicate a collapse of the industrialized system towards an agrarian culture around the year 2025. It is noted that the model did not consider technological initiative or man's willingness to change lifestyles. The final (33) schematic is a guesstimate of noticeable impact timescales, indicating when research projects on transition or ultimate energy sources at LASL might be expected to yield impact. (MCW)

  2. Teaching Geometrical Figures in Waray: The LNU-ILS Experience

    Directory of Open Access Journals (Sweden)

    Voltaire Q. Oyzon

    2014-05-01

    Full Text Available Waray children are “unconsciously shifting from their mother language to English and/or Tagalog in their vocabulary use”. English vocabularies are more familiar to Waray educands of today than are the indigenous Waray terms, for instance, for geometrical figures, colors, numbers, etc. Still, “it is an ongoing debate of what type of language should be used in the implementation of MTBMLE.” Should educators use a Waray that borrows heavily from English and other languages or a Waray that uses exclusively its own indigenous terms and concepts? The researchers formulate a single lesson plan using an inductive method incorporating the Montessori Approach. We have two types of pupils at LNU-ILS: Waray pupils whose language at home is Waray, and Waray pupils who are exposed to English at home.

  3. Enhanced thermoelectric figure of merit in polycrystalline carbon nanostructures

    Science.gov (United States)

    Lehmann, Thomas; Ryndyk, Dmitry A.; Cuniberti, Gianaurelio

    2015-07-01

    Grain boundaries are commonly observed in carbon nanostructures, but their influence on thermal and electric properties is still not completely understood. Using a combined approach of density functional tight-binding theory and nonequilibrium Green functions we investigate electron and phonon transport in carbon-based systems. In this work, quantum transport and thermoelectric properties are summarized for graphene sheets, graphene nanoribbons, and carbon nanotubes with a variety of grain boundary types in a wide temperature range. Motivated by previous findings that disorder scatters phonons more effectively than electrons, a significant improvement in the thermoelectric performance for polycrystalline systems is expected. As the effect is marginally sensitive to the grain boundary type, we demonstrate that grain boundaries are a viable tool to greatly enhance the figure of merit, paving the way for the design of new thermoelectric materials.

  4. Ethical considerations in psychiatric profiling of political figures.

    Science.gov (United States)

    Post, Jerrold M

    2002-09-01

    Questions concerning such matters as the effects of health and alcoholism on Boris Yeltsin's decision making; the mind of the Unabomber; the psychology and decision making of Saddam Hussein of Iraq, who was initially characterized by the US Government as "the madman of the Middle East"; the psychology of David Koresh and the Branch Davidians, who were involved in an extended siege with the Bureau of Alcohol, Tobacco, and Firearms and the Federal Bureau of Investigation that ended tragically on April 19, 1993; and, most recently, the psychology of the nineteen al-Qaeda terrorists responsible for the tragic events of September 11, 2001 in which they claimed thousands of lives while giving their own, "killing in the name of God," and of their charismatic leader Osama bin Laden have led journalists to turn to social scientists, including psychiatrists, to offer commentary on public figures.

  5. Positive Feedback From Male Authority Figures Boosts Women's Math Outcomes.

    Science.gov (United States)

    Park, Lora E; Kondrak, Cheryl L; Ward, Deborah E; Streamer, Lindsey

    2018-03-01

    People often search for cues in the environment to determine whether or not they will be judged or treated negatively based on their social identities. Accordingly, feedback from gatekeepers-members of majority groups who hold authority and power in a field-may be an especially important cue for those at risk of experiencing social identity threat, such as women in math settings. Across a series of studies, women who received positive ("Good job!") versus objective (score only) feedback from a male (vs. female) authority figure in math reported greater confidence; belonging; self-efficacy; more favorable Science, Technology, Engineering, and Mathematics (STEM) attitudes/identification/interest; and greater implicit identification with math. Men were affected only by the type of math feedback they received, not by the source of feedback. A meta-analysis across studies confirmed results. Together, these findings suggest that positive feedback from gatekeepers is an important situational cue that can improve the outcomes of negatively stereotyped groups.

  6. To discuss radiation without the use of units and figures

    International Nuclear Information System (INIS)

    Wahlstroem, Bjoern

    1989-01-01

    The public is unreasonably concerned and anxious about ionizing radiation. This undefined, irrational, but still real fear of something you know is there even if you cannot perceive it with your five senses is one of the greatest problems the nuclear industry has to attack today. The major problem in this case may be the technical language used by experts. The man in the street has no idea of the technical terms experts use. However, it is possible to make our message clear without the use of any units or figures. A lot can be done for the understanding and confidence by making comparisons to familiar concepts and situations, by taking off our doctors' coats and stepping down to the grass-root level to talk with people in their own everyday language. (author)

  7. Key Figures on Climate France and Worldwide 2011 Edition

    International Nuclear Information System (INIS)

    2011-01-01

    Each year, CDC Climate Research publishes in partnership with the French Ministry of Ecology, Sustainable Development, Transport and Housing (MEDDTL) the Key Figures on Climate - France and Worldwide, in the Highlights Series. This publication aims at gathering all the relevant data relating the scientific analysis of climate change, greenhouses gas emissions, in particular CO 2 emissions linked to energy use, and the emissions reduction-targeted economic policies. Contents: Part 1 - Climate Change: The Greenhouse Effect - Humans and the Greenhouse Effect - Stocks and Flows of GHGs: The Example of CO 2 - Increase in Atmospheric GHG Levels - Concentrations and Temperatures - Global Warming - Warming Differentiated by Latitude - Consequences of Global Warming. Part 2 - Greenhouse Gas Emissions: Snapshot of Global GHG Emissions - European Panorama of GHGs - French Panorama of GHGs. Part 3 - Energy-related CO 2 Emissions in the World: Energy-related CO 2 emissions - CO 2 Emissions due to Electricity Production including CHP Plants - CO 2 Emission Factors. Part 4 - CO 2 Emissions by Sector in Europe and in France: Fuel Combustion: the Largest Emitter of CO 2 - CO 2 Emissions due to Energy Production and Conversion - Transportation-related CO 2 Emissions - Industry-related CO 2 Emissions - CO 2 Emissions in the Other Sectors - CO 2 Emissions excluding Fuel Combustion. Part 5 - Climate Policies: The Kyoto Protocol - The Tradable Permit Market - Project Mechanisms of the Kyoto Protocol - Other Initiatives to Reduce Emissions - The European Union's Commitment - The European CO 2 Market (EU ETS) - The Carbon Price in the EU ETS - States Climate Policy: The Case of France. Practical information: CO 2 Key Figures - Glossary of Terms - Useful Links

  8. Multi-length scale porous polymer films from hypercrosslinked breath figure arrays.

    Science.gov (United States)

    Ding, Lei; Zhang, Aijuan; Li, Wenqing; Bai, Hua; Li, Lei

    2016-01-01

    Multi-length scale porous polymer (MLSPP) films were fabricated using commercially available polystyrene (PS) via static breath figure (BF) process and sequent hypercrosslinking reaction. One level of ordered pores in microscale were introduced using static BF process, and the other level in nanoscale were produced by the sequent Friedel-Crafts hypercrosslinking reaction. The chemical structure of the PS MLSPP film was investigated by Fourier transformation infrared spectrometry and solid state nuclear magnetic resonance, and the morphology of the film was observed with electron microscopes. The MLSPP films showed large specific surface areas and excellent chemical and thermal stabilities, owing to the micropores and the crosslinked chemical structure produced by the Friedel-Crafts reaction. The methodology reported in this paper is a template-free, low cost and general strategy for the preparation of MLSPP films, which has potential applications in the areas of environment and energy. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Stochastic Models of Human Errors

    Science.gov (United States)

    Elshamy, Maged; Elliott, Dawn M. (Technical Monitor)

    2002-01-01

    Humans play an important role in the overall reliability of engineering systems. More often accidents and systems failure are traced to human errors. Therefore, in order to have meaningful system risk analysis, the reliability of the human element must be taken into consideration. Describing the human error process by mathematical models is a key to analyzing contributing factors. Therefore, the objective of this research effort is to establish stochastic models substantiated by sound theoretic foundation to address the occurrence of human errors in the processing of the space shuttle.

  10. Linear network error correction coding

    CERN Document Server

    Guang, Xuan

    2014-01-01

    There are two main approaches in the theory of network error correction coding. In this SpringerBrief, the authors summarize some of the most important contributions following the classic approach, which represents messages by sequences?similar to algebraic coding,?and also briefly discuss the main results following the?other approach,?that uses the theory of rank metric codes for network error correction of representing messages by subspaces. This book starts by establishing the basic linear network error correction (LNEC) model and then characterizes two equivalent descriptions. Distances an

  11. Two critical periods in early visual cortex during figure-ground segregation

    NARCIS (Netherlands)

    Wokke, M.E.; Sligte, I.G.; Scholte, H.S.; Lamme, V.A.F.

    2012-01-01

    .The ability to distinguish a figure from its background is crucial for visual perception. To date, it remains unresolved where and how in the visual system different stages of figure-ground segregation emerge. Neural correlates of figure border detection have consistently been found in early visual

  12. Students Learn about Chinese Culture through the Folktale "Yeh-Shen": Emphasizing Figurative Language Interpretation

    Science.gov (United States)

    Palmer, Barbara C.; Sun, Lingzhi; Leclere, Judith T.

    2012-01-01

    This article will analyze the figurative language that reflects Chinese traditional society and culture in "Yeh-Shen." The authors will consider both the figures of speech and the figures of thought (to include symbolism) that provide insight into an understanding of the Chinese culture through a reading of "Yeh-Shen." This analysis can be used by…

  13. Figurative Language and Multicultural Education: Metaphors of Language Acquisition and Retention

    Science.gov (United States)

    Erdmann, Susan

    2016-01-01

    Linguistics has long recognised that figurative language in the form of metaphorical expressions structures and communicates attitudes towards the ideas and concepts being expressed and that multilingual students also employ linguistic figures frequently in their writing. In this study, multilingual students use figurative language to both…

  14. "We All We Got": Describing and Connecting Football and Classroom Figured Worlds and Literacies

    Science.gov (United States)

    Rudd, Lynn L.

    2013-01-01

    Adolescents use literacies in order to build identities in a variety of figured worlds. Some identities become more powerful than others as adolescents attempt to understand and successfully utilize the valuations and literacies of the diverse figured worlds in which they participate. The goals of this study were to describe the figured worlds of…

  15. surface properties of electrochemically reduced viscose rayon ...

    African Journals Online (AJOL)

    DJFLEX

    A viscose rayon based activated carbon cloth (ACC) was electrochemically reduced under a wide ... Electrochemical reduction resulted in a loss of 28% BET surface .... electrodes. As shown in. Figure 1. Schematic of the electrochemical cell used for electrochemical reduction. Figure 1, the anodes were placed at equal.

  16. Comprehensive Error Rate Testing (CERT)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) implemented the Comprehensive Error Rate Testing (CERT) program to measure improper payments in the Medicare...

  17. Quantile Regression With Measurement Error

    KAUST Repository

    Wei, Ying

    2009-08-27

    Regression quantiles can be substantially biased when the covariates are measured with error. In this paper we propose a new method that produces consistent linear quantile estimation in the presence of covariate measurement error. The method corrects the measurement error induced bias by constructing joint estimating equations that simultaneously hold for all the quantile levels. An iterative EM-type estimation algorithm to obtain the solutions to such joint estimation equations is provided. The finite sample performance of the proposed method is investigated in a simulation study, and compared to the standard regression calibration approach. Finally, we apply our methodology to part of the National Collaborative Perinatal Project growth data, a longitudinal study with an unusual measurement error structure. © 2009 American Statistical Association.

  18. Numerical optimization with computational errors

    CERN Document Server

    Zaslavski, Alexander J

    2016-01-01

    This book studies the approximate solutions of optimization problems in the presence of computational errors. A number of results are presented on the convergence behavior of algorithms in a Hilbert space; these algorithms are examined taking into account computational errors. The author illustrates that algorithms generate a good approximate solution, if computational errors are bounded from above by a small positive constant. Known computational errors are examined with the aim of determining an approximate solution. Researchers and students interested in the optimization theory and its applications will find this book instructive and informative. This monograph contains 16 chapters; including a chapters devoted to the subgradient projection algorithm, the mirror descent algorithm, gradient projection algorithm, the Weiszfelds method, constrained convex minimization problems, the convergence of a proximal point method in a Hilbert space, the continuous subgradient method, penalty methods and Newton’s meth...

  19. Aging transition by random errors

    Science.gov (United States)

    Sun, Zhongkui; Ma, Ning; Xu, Wei

    2017-02-01

    In this paper, the effects of random errors on the oscillating behaviors have been studied theoretically and numerically in a prototypical coupled nonlinear oscillator. Two kinds of noises have been employed respectively to represent the measurement errors accompanied with the parameter specifying the distance from a Hopf bifurcation in the Stuart-Landau model. It has been demonstrated that when the random errors are uniform random noise, the change of the noise intensity can effectively increase the robustness of the system. While the random errors are normal random noise, the increasing of variance can also enhance the robustness of the system under certain conditions that the probability of aging transition occurs reaches a certain threshold. The opposite conclusion is obtained when the probability is less than the threshold. These findings provide an alternative candidate to control the critical value of aging transition in coupled oscillator system, which is composed of the active oscillators and inactive oscillators in practice.

  20. The uncorrected refractive error challenge

    Directory of Open Access Journals (Sweden)

    Kovin Naidoo

    2016-11-01

    Full Text Available Refractive error affects people of all ages, socio-economic status and ethnic groups. The most recent statistics estimate that, worldwide, 32.4 million people are blind and 191 million people have vision impairment. Vision impairment has been defined based on distance visual acuity only, and uncorrected distance refractive error (mainly myopia is the single biggest cause of worldwide vision impairment. However, when we also consider near visual impairment, it is clear that even more people are affected. From research it was estimated that the number of people with vision impairment due to uncorrected distance refractive error was 107.8 million,1 and the number of people affected by uncorrected near refractive error was 517 million, giving a total of 624.8 million people.