WorldWideScience

Sample records for surface deterioration due

  1. A study of the surface deterioration due to erosion. [of gas turbine blades

    Science.gov (United States)

    Tabakoff, W.; Balan, C.

    1983-01-01

    It is pointed out that materials exposed to particle impacts are eroded and subjected to deterioration of their surface quality. In the case of turbomachinery, this surface deterioration can lead to a significant decrease in engine performance. Tabakoff and Balan (1981) have conducted experiments on the erosion related performance changes in two-dimensional airfoil cascades. It was found that the increase in surface roughness associated with erosion is a major factor in the performance decrease of the cascades. Attention is given to experiments which were conducted on 6061 T6 flat plate aluminum specimens. A series of experiments were carried out in an erosion wind tunnel using a collimated beam of particles. In agreement with existing theories and experiments, erosion ripple generation was observed for the angles of attack up to 60 degrees.

  2. Mine water quality deterioration due to acid mine drainage

    Science.gov (United States)

    Singh, Gurdeep

    1987-03-01

    Water quality deterioration due to acid mine drainage is of concern in the northeastern coalfield of India as the water in this area is severely polluted. The mine drainage water emanating from various collieries are highly acidic in character and contain high hardness, sulphate, total dissolved solids and iron coupled with low pH values—which further results in contamination of trace (heavy) metals at significant levels. Trace metals are highly toxic and undesirable and are injurious to human health. These acidic waters are also typically hard in character because of iron sulphate content rather than common Ca-Mg bicarbonate type hardness.

  3. AIR QUALITY DETERIORATION IN TEHRAN DUE TO MOTORCYCLES

    Directory of Open Access Journals (Sweden)

    M. Shafiepour and H. Kamalan

    2005-07-01

    Full Text Available Since there is a rise of motorcycles population as well as other motor vehicles, it seems that air Pollution deterioration should be studied as one of its environmental impacts. The main objective of this study was to develop a number of scenarios in order to determine the amount of Tehran's air pollution attributable to motorcycles and select the best and the most probable case to be recommended for implementation. The first step was to collect data such as the number of active motorcycles, daily traffic volume, average traveling speed and actual emission factors. For this purpose, a detailed questionnaire was designed to be completed by field surveys and measurements. The collected data were compared with traffic volume data, manufacturing statistics and the latest production capacity forecast in this field. Finally, with this data and emission factors for each type of motorcycle, an emissions inventory model was chosen to provide annual emissions from motorcycles in Tehran in different scenarios. The results showed that in 2002, there has been about 450'000 active motorcycles (4-stroke 58%, 2-stroke 28%, and moped 14% with average speed of 40 km/h and average mileage of 110 km/d. Five scenarios were developed. The best scenario was "Changing all motorcycles to 4-strokes under EU-97 standard" which would result in reduction of NMVOC by 75%, CO by 35% and PM10 by 88%.

  4. Microbial deterioration of surface paint coatings. | Ogbulie | Global ...

    African Journals Online (AJOL)

    Bacterial and fungal species associated with the normal and deteriorated painted surface in Owerri, Imo State were isolated and identified. The bacteria genera isolated were Pseudomonas, Bacillus, Micrococcus, Staphylococcus, Enterobacter and Streptomces, whereas the fungal genera isolated were Rhizopus, ...

  5. Numerical Simulation of Material Strength Deterioration due to Pitting Corrosion

    OpenAIRE

    Kolios, Athanasios J.; Srikanth, Sumant; Salonitis, Konstantinos

    2014-01-01

    Pitting corrosion is an insidious form of localized corrosion affecting characteristics of various engineering metallic alloys. Currently very limited literature exists with regard to systematic characterization of pitted surfaces or the efficient use of numerical methods to assess its effect, i.e. fatigue life reduction caused by the state of a corroded specimen and particularly through the study of stress concentrations considering the geometrical anomalies introduced to a surface. Much of ...

  6. Surface water quality deterioration during low-flow

    Science.gov (United States)

    Hellwig, Jost; Stahl, Kerstin; Lange, Jens

    2017-04-01

    Water quality deterioration during low streamflow has mostly been linked to a lower dilution potential for pollutants. Some studies have also found spatial heterogeneities and a different behavior of different water quality parameters. Even though the general mechanisms that cause water quality changes during low-flow are well understood, only a few efforts have been made to explain the differences in the magnitudes of observed deteriorations. We investigated 72 catchments across the federal state of Baden-Wuerttemberg, Germany, for changes in water quality during low-flow events. Data from the state's water quality monitoring network provided seven water quality parameters (water temperature, electrical conductivity, concentrations of chloride, sodium, sulfate, nitrate and phosphate), which we statistically related to streamflow variability. Water temperatures increased during low flow in summer but decreased during low flow in winter. Nitrate concentrations revealed high spatial heterogeneity with about one third of the stations showing decreasing values during drought. For all other parameters concentrations rose during low-flow with only a few exceptions. Despite consistent trend directions, the magnitudes of changes with streamflow differed markedly across the state. Both multiple linear regression and a multiple analysis of variances were applied to explain these differences with the help of catchment characteristics. Results indicated that for sulfate and conductivity geology of the catchments was the most important control whereas for chloride, sodium and nitrate sewage treatment plants had largest influence. For phosphate no clear control could be identified. Independent from the applied method, land use was a less important control on river water quality during drought than geology or inflow from sewage treatment plants. These results show that the effects of diffuse and point sources, as well as those of natural and anthropogenic sources differ for

  7. Evaluation of deterioration of structural concrete due to chloride intrusion and other damaging mechanisms.

    Science.gov (United States)

    2015-09-01

    Kentucky's bridges continue to age and experience distress. The intrusion of chlorides into : concrete remains the primary mechanism for deterioration. It leads to reinforcing steel corrosion : that damages the adjoining concrete structure. This stud...

  8. Detection of defects and evaluation of material deterioration using surface wave technique

    International Nuclear Information System (INIS)

    Yokono, Yoshikazu; Yoshiara, Toshikatsu; Suetsugu, Jun; Imanaka, Takuichi

    1996-01-01

    It is very important to detect surface damage and evaluate deterioration of material surface because of their influences on mechanical properties of materials. In general, magnetic particle testing, liquid penetrant testing and eddy current testing are commonly used for detecting surface flaws. These methods, however, are neither effective for estimating flaw height nor for evaluating material deterioration. In this paper the authors apply surface wave propagating along the test surface for these purposes. The surface wave (Rayleigh wave) propagates only near the surface layer in the order of one wave length. In other words, the lower the frequency, the deeper the penetration depth of the surface wave. Accordingly, they can select the frequency considering the inspection purpose. On the other hand, when surface wave having broad-band frequency propagates along the surface of a specimen, higher frequency ultrasound propagates very close to the surface and lower frequency ultrasound propagates deeper in the specimen. Hence, frequency analysis is expected to be effective for estimating upper edge of flaw. Surface wave is also very sensitive to material surface properties such as existence of voids or micro cracks. Acoustic characteristics such as sound velocity, attenuation and other feature parameters are influenced by the variation of the material properties. Hence, material deterioration can be evaluated by the acoustic features

  9. PERFORMANCE DETERIORATION OF THERMOSIPHON SOLAR FLAT PLATE WATER HEATER DUE TO SCALING

    Directory of Open Access Journals (Sweden)

    arunachala umesh chandavar

    2011-12-01

    Full Text Available 0 0 1 340 1943 International Islamic University 16 4 2279 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Times New Roman";} The performance of Flat plate Solar Water Heater deteriorates within five to twelve years of their installation due to factors related to manufacturing, operating conditions, lack of maintenance etc. Especially, problem due to scaling is significant as it is based on quality of water used. The remaining factors are system dependent and could be overcome by quality production. Software is developed by incorporating Hottel Whillier Bliss (H-W-B equation to ascertain the effect of scaling on system efficiency in case of thermosiphon system. In case of clean thermosiphon system, the instantaneous efficiency calculated at 1000 W/m2 radiation is 72 % and it drops to 46 % for 3.7 mm scale thickness. The mass flow rate is reduced by 90 % for 3.7 mm scale thickness. Whereas, the average temperature drop of water in the tank is not critical due to considerable heat content in water under severe scaled condition.  But practically in case of major scale growth, some of the risers are likely to get blocked completely which leads to negligible temperature rise in the tank. ABSTRAK: Prestasi plat rata pemanas air suria merosot selepas lima hingga dua belas tahun  pemasangannya disebabkan faktor-faktor yang berkaitan dengan pembuatannya, cara kendaliannya, kurangnya penyelenggaraan dan sebagainya.  Terutama sekali, masalah disebabkan scaling (tembunan endapan mineral perlu diambil berat kerana ianya bergantung kepada kualiti air yang digunakan. Faktor-faktor selebihya bersandarkan sistem dan ia

  10. Partial discharge patterns related to surface deterioration in voids in epoxy

    DEFF Research Database (Denmark)

    Holbøll, Joachim; Henriksen, Mogens

    1990-01-01

    Results are presented from an investigation of the relationship between changes in partial discharge patterns and the surface deterioration process taking place in small naturally formed spherical voids in epoxy plastic. The voids were exposed to a moderate electric stress above inception level...

  11. Neural correlates underlying naloxone-induced amelioration of sexual behavior deterioration due to an alarm pheromone

    Directory of Open Access Journals (Sweden)

    Tatsuya eKobayashi

    2015-02-01

    Full Text Available Sexual behavior is suppressed by various types of stressors. We previously demonstrated that an alarm pheromone released by stressed male Wistar rats is a stressor to other rats, increases the number of mounts needed for ejaculation, and decreases the hit rate (described as the number of intromissions/sum of the mounts and intromissions. This deterioration in sexual behavior was ameliorated by pretreatment with the opioid receptor antagonist naloxone. However, the neural mechanism underlying this remains to be elucidated. Here, we examined Fos expression in 31 brain regions of pheromone-exposed rats and naloxone-pretreated pheromone-exposed rats 60 min after 10 intromissions. As previously reported, the alarm pheromone increased the number of mounts and decreased the hit rate. In addition, Fos expression was increases in the anterior medial division, anterior lateral division and posterior division of the bed nucleus of the stria terminalis, parvocellular part of the paraventricular nucleus of the hypothalamus, arcuate nucleus, dorsolateral and ventrolateral periaqueductal gray, and nucleus paragigantocellularis. Fos expression decreased in the magnocellular part of the paraventricular nucleus of the hypothalamus. Pretreatment with naloxone blocked the pheromone-induced changes in Fos expression in the magnocellular part of the paraventricular nucleus of the hypothalamus, ventrolateral periaqueductal gray, and nucleus paragigantocellularis. Based on these results, we hypothesize that the alarm pheromone deteriorated sexual behavior by activating the ventrolateral periaqueductal gray-nucleus paragigantocellularis cluster and suppressing the magnocellular part of the paraventricular nucleus of the hypothalamus via the opioidergic pathway.

  12. A real case of steam-cured concrete track slab premature deterioration due to ASR and DEF

    Directory of Open Access Journals (Sweden)

    Kunlin Ma

    2017-06-01

    Full Text Available Deterioration mechanisms of some premature damaged steam-cured concrete track slabs (CTS in Chinese railway less than 4 years were investigated. Field investigation, raw materials test and suspicious products analysis were carried out. Results show that steam-cured heat damage (SCHD of concrete takes place in steam-cured process. Expansion products are ettringite in hydrated products and alkali-silica gels between the interface of hydrated products and coarse aggregate. SCHD makes CTS surface layer loose, porous and more micro-cracks. Long-term fatigue load from high-speed train acting on CTS enlarges concrete microcracks, leading to water penetrating into concrete easily in moist and rainy environment. In the process of water ingression, alkali-silica reaction (ASR and delayed ettringite formation (DEF take place, hence resulting in CTS cracking and premature deterioration.

  13. SU-F-J-19: Robust Region-Of-Interest (ROI) for Consistent Registration On Deteriorated Surface Images

    Energy Technology Data Exchange (ETDEWEB)

    Kang, H; Malin, M; Chmura, S; Hasan, Y; Al-Hallaq, H [The Department of Radiation and Cellular Oncology, The University of Chicago Medicine, Chicago, IL (United States)

    2016-06-15

    Purpose: For African-American patients receiving breast radiotherapy with a bolus, skin darkening can affect the surface visualization when using optical imaging for daily positioning and gating at deep-inspiration breath holds (DIBH). Our goal is to identify a region-of-interest (ROI) that is robust against deteriorating surface image quality due to skin darkening. Methods: We study four patients whose post-mastectomy surfaces are imaged daily with AlignRT (VisionRT, UK) for DIBH radiotherapy and whose surface image quality is degraded toward the end of treatment. To simulate the effects of skin darkening, surfaces from the first ten fractions of each patient are systematically degraded by 25–35%, 40–50% and 65–75% of the total area of the clinically used ROI-ipsilateral-chestwall. The degraded surfaces are registered to the reference surface in six degrees-of-freedom. To identify a robust ROI, three additional reference ROIs — ROI-chest+abdomen, ROI-bilateral-chest and ROI-extended-ipsilateral-chestwall are created and registered to the degraded surfaces. Differences in registration using these ROIs are compared to that using ROI-ipsilateral-chestwall. Results: For three patients, the deviations in the registrations to ROI-ipsilateral-chestwall are > 2.0, 3.1 and 7.9mm on average for 25–35%, 40–50% and 65–75% degraded surfaces, respectively. Rotational deviations reach 11.1° in pitch. For the last patient, registration is consistent to within 2.6mm even on the 65–75% degraded surfaces, possibly because the surface topography has more distinct features. For ROI-bilateral-chest and ROI-extended-ipsilateral-chest registrations deviate in a similar pattern. However, registration on ROI-chest+abdomen is robust to deteriorating image qualities to within 4.2mm for all four patients. Conclusion: Registration deviations using ROI-ipsilateral-chestwall can reach 9.8mm on the 40–50% degraded surfaces. Caution is required when using AlignRT for patients

  14. PO02 - Clinical profile of children admitted to a paediatric intensive care unit due to acute clinical deterioration

    DEFF Research Database (Denmark)

    Jensen, Claus Sixtus; Aagaard, Hanne; Olesen, Hanne Vebert

    2016-01-01

    , an understanding of the nature of illness is important to patient safety. PURPOSE: This study described the frequency, clinical characteristics and outcomes of children who experience unplanned admission to a PICU due to clinical deterioration. METHODS: A registry retrospective descriptive study describing...... and exploring life-threatening situations leading to unexpected transfers to PICU in hospitalised children. The study includes all paediatric departments in the Central Denmark Region. PERSPECTIVE: This study will provide knowledge to assist the research efforts to identify and improve the management...

  15. Pavement deterioration due to horizontal hydraulic fracturing and wind farm development in Kansas : technical summary.

    Science.gov (United States)

    2017-03-01

    The purpose of this research was to determine the impact on pavements and : roadbeds due to the increase in truck traffic from oil and gas fracking activities, : as well as from expansion of the wind energy industry, and estimate the resulting : redu...

  16. Pavement deterioration due to horizontal hydraulic fracturing and wind farm development in Kansas : final report.

    Science.gov (United States)

    2017-03-01

    The purpose of this research was to determine the impact on pavements and roadbeds due to the : increase in truck traffic from oil and gas fracking activities, as well as from expansion of the wind energy : industry, and estimate the resulting reduct...

  17. A prediction model for uniaxial compressive strength of deteriorated pyroclastic rocks due to freeze-thaw cycle

    Science.gov (United States)

    İnce, İsmail; Fener, Mustafa

    2016-08-01

    Either directly or indirectly, building stone is exposed to diverse atmospheric interactions depending on the seasonal conditions. Due to those interactions, objects of historic and cultural heritage, as well as modern buildings, partially or completely deteriorate. Among processes involved in rock deterioration, the freeze-thaw (F-T) cycle is one of the most important. Even though pyroclastic rocks have been used as building stone worldwide due to their easy workability, they are the building stone most affected by the F-T cycle. A historical region in Central Anatolia, Turkey, Cappadoia encompasses exceptional natural wonders characterized by fairy chimneys and unique historical and cultural heritage. Human-created caves, places of worship and houses have been dug into the pyroclastic rocks, which have in turn been used in architectural construction as building stone. Using 10 pyroclastic rock samples collected from Cappadocia, we determined the rock's index-mechanical properties to develop a statistical model for estimating percentage loss of uniaxial compressive strength a critical parameter of F-T cycle's important value. We used dry density (ρd), ultrasonic velocity (Vp), point load strengths (IS(50)), and slake-durability test indexes (Id4) values of unweathered rocks in our model, which is highly reliable (R2 = 0.84) for predetermination of percentage loss of uniaxial compressive strengths of pyroclastic rocks without requiring any F-T tests.

  18. Groundwater deterioration of shallow groundwater aquifers due to overexploitation in Northeast Jordan

    Energy Technology Data Exchange (ETDEWEB)

    El-Naqa, Ali; Hammouri, Nezar [Faculty of Natural Resources and Environment, Hashemite University, Zarqa (Jordan); Al-Momani, Mohammad; Kilani, Suzan [Ministry of Water and Irrigation, Amman (Jordan)

    2007-04-15

    Groundwater is the major water resource in Jordan and most of the groundwater basins are already exploited beyond their estimated safe yield. Azraq basin is one of the most important groundwater basins in Jordan, which supplies Amman with drinking water. However, due to overpumping from the shallow groundwater aquifers, the water level dropped dramatically and signs of salinization and depletion are starting to occur. The severe drawdown in the Azraq well-field caused a reverse in the hydraulic gradient and consequently, the saltwater in the center of the basin (Qa-Azraq) started to move in the direction of the well-field. The salinization in the shallow aquifer (basalt/B5/B4) is believed to result from one of the following scenarios: (i) a reverse flow from Sabkha to the AWSA well field, (ii) an upward leakage from the middle aquifer system (B2/A7) and the combined B3 Aquitard-B2/A7 aquifer, (iii) a dissolution process between the water and rock matrix due to lowering of the dynamic water levels during pumping which reached the mineralized formations underlying the Basalt. The salinization trend of some AWSA wells represented by the gradual increase of major ions is associated with rather constant stable isotopic contents. This indicates that these constituents originate from the main minerals existing in the matrix of the aquifers and thus this scenario is the most likely to occur. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  19. Deterioration of Early Holocene coral reef due to sea level rise along west coast of India: Benthic foraminiferal testimony

    Directory of Open Access Journals (Sweden)

    Abhijit Mazumder

    2012-09-01

    Full Text Available A total of 103 surface sediment samples collected from the water depth range of 15–3300 m along Vijaydurg-Karwar stretch of central west coast of India were analyzed for foraminiferal content. Relict benthic foraminiferal assemblage was noted within 50–135 m water depth. The relict benthic foraminiferal assemblage that includes Amphistegina, Operculina and Alveolinella in sediment samples within the water depth of 85–135 m indicates presence of coral reef at this depth during Early Holocene. The presence of barnacle fouling on Relict foraminifera at 60–90 m confirms the paleo-shoreline. The shallow depth zone is characterized by presence of agglutinated relict foraminifera. The agglutinated forms indicate freshwater influx, which eventually increased the sea level and subsequently deteriorated the paleo-coral reef.

  20. Rapid respiratory deterioration and sudden death due to disseminated cryptococcosis in a patient with the acquired immunodeficiency syndrome.

    Science.gov (United States)

    Penmetsa, S; Rose, T A; Crook, E D

    1999-09-01

    We report the case of a patient with the acquired immunodeficiency syndrome (AIDS) whose death occurred within 30 hours of hospitalization due to disseminated cryptococcosis, manifested by dizziness, cough, and shortness of breath. The clinical picture was consistent with pneumocystis pneumonia, and antibiotic therapy with corticosteroids was initiated. Despite initial improvement, the patient's condition quickly worsened, resulting in cardiorespiratory arrest and death. Autopsy revealed cryptococci in several organs. Sudden, rapid deterioration and death are rare consequences of disseminated cryptococcosis, and steroids may worsen the course of the disease. On the basis of this case and review of similar cases in the literature, we recommend early consideration of disseminated cryptococcosis in AIDS patients with pneumonia. Early diagnosis and appropriate therapy are essential to reduce morbidity and mortality.

  1. Surface wave generation due to glacier calving

    Directory of Open Access Journals (Sweden)

    Stanisław R. Massel

    2013-02-01

    Full Text Available Coastal glaciers reach the ocean in a spectacular process called "calving". Immediately after calving, the impulsive surface waves are generated, sometimes of large height. These waves are particularly dangerous for vessels sailing close to the glacier fronts. The paper presents a theoretical model of surface wave generation due to glacier calving. To explain the wave generation process, four case studies of ice blocks falling into water are discussed: a cylindrical ice block of small thickness impacting on water, an ice column sliding into water without impact, a large ice block falling on to water with a pressure impulse, and an ice column becoming detached from the glacier wall and falling on to the sea surface. These case studies encompass simplified, selected modes of the glacier calving, which can be treated in a theoretical way. Example calculations illustrate the predicted time series of surface elevations for each mode of glacier calving.

  2. A real case of steam-cured concrete track slab premature deterioration due to ASR and DEF

    OpenAIRE

    Ma, Kunlin; Long, Guangcheng; Xie, Youjun

    2017-01-01

    Deterioration mechanisms of some premature damaged steam-cured concrete track slabs (CTS) in Chinese railway less than 4 years were investigated. Field investigation, raw materials test and suspicious products analysis were carried out. Results show that steam-cured heat damage (SCHD) of concrete takes place in steam-cured process. Expansion products are ettringite in hydrated products and alkali-silica gels between the interface of hydrated products and coarse aggregate. SCHD makes CTS surfa...

  3. Hybrid Assistive Limb Intervention in a Patient with Late Neurological Deterioration after Thoracic Myelopathy Surgery due to Ossification of the Ligamentum Flavum

    Directory of Open Access Journals (Sweden)

    Masakazu Taketomi

    2018-01-01

    Full Text Available Purpose. We evaluated improvements in gait after using the Hybrid Assistive Limb (HAL® exoskeleton robot in a patient with late-onset neurological deterioration of lower extremity function after undergoing thoracic spine surgery for a myelopathy due to ossification of the ligamentum flavum. Case Presentation. A 70-year-old man participated in ten 20 min sessions of HAL intervention, twice weekly for five weeks. The effects of each HAL session were evaluated based on changes in performance on the 10 m walk test (10 MWT, lower limb kinematics quantified from motion capture, and the activation ratio of the gastrocnemius, measured before and after the intervention. Muscle activity was recorded using surface electromyography and synchronized to measured kinematics. The HAL intervention improved gait speed and step length, with an increase in the hip flexion angle during the swing phase and a decrease in the activation ratio of the gastrocnemius. The modified Ashworth scale improved from 1+ to 1 and International Standards for Neurological and Functional Classification of Spinal Cord Injury motor scores from 34 to 49. Conclusion. Intervention using the HAL exoskeleton robot may be an effective method to improve functional ambulation in patients with chronic spinal disorders.

  4. Surface cooling due to forest fire smoke

    Science.gov (United States)

    Robock, Alan

    1991-11-01

    In four different cases of extensive forest fire smoke the surface temperature effects were determined under the smoke cloud. In all cases, daytime cooling and no nighttime effects were found. The locations of smoke clouds from extensive forest fires in western Canada in 1981 and 1982, in northern China and Siberia in 1987, and in Yellowstone National Park in northwestern Wyoming in 1988 were determined from satellite imagery. As these smoke clouds passed over the midwestern United States for the Canadian and Yellow-stone fires and over Alaska for the Chinese/Siberian fires, surface air temperature effects were determined by comparing actual surface air temperatures with those forecast by model output statistics (MOS) of the United States National Weather Service. MOS error fields corresponding to the smoke cloud locations showed day-time cooling of 1.5° to 7°C under the smoke but no nighttime effects. These results correspond to theoretical estimates of the effects of smoke, and they serve as observational confirmation of a portion of the nuclear winter theory. This also implies that smoke from biomass burning can have a daytime cooling effect of a few degrees over seasonal time scales. In order to properly simulate the present climate with a numerical climate model in regions of regular burning it may be necessary to include this smoke effect.

  5. Rapid deterioration of sediment surface habitats in Bellingham Bay, Washington State, as indicated by benthic foraminifera.

    Science.gov (United States)

    Nesbitt, Elizabeth A; Martin, Ruth A; Martin, David E; Apple, Jude

    2015-08-15

    Foraminiferal assemblages in sediment grab samples were utilized to evaluate the impacts of anthropogenic activities on benthic habitats in Bellingham Bay, Washington State, U.S.A. Seventy-three samples taken in 1987, 1997, 2006 and 2010 yielded 35 species of foraminifera from 28 genera. Assemblage composition and diversity data indicate a marked deterioration between 1987 and 2010, contrary to the published Chemical Index, but analogous to the situation with macrobiota. Correlation of diversity with chemical pollutants and metals did not identify any significant correlations, however, an unrelated but highly relevant study of bottom water dissolved oxygen concentrations and pH in Bellingham Bay suggests eutrophication with accompanying hypoxia and acidification may be part of the cause. Thus, the metrics of contamination alone do not adequately characterize habitat viability, and benthic foraminiferal assemblages provide insight into the health of coastal ecosystems. Published by Elsevier Ltd.

  6. Partial discharge patterns and surface deterioration in voids in filled and unfilled epoxy

    DEFF Research Database (Denmark)

    Holbøll, Joachim; Henriksen, Mogens

    1992-01-01

    /height analyses were performed over a period of 2400 h and showed very characteristic discharge patterns for each material combination. A unique behavior with regard to changes of pulse repetition rate and maximum apparent charge was observed for PD in alumina- and silica-filled epoxy. The void surfaces were...

  7. Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

    Directory of Open Access Journals (Sweden)

    Zahedi Zahedi

    2016-04-01

    Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

  8. Degradation Potential of Bulk Versus Incrementally Applied and Indirect Composites: Color, Microhardness, and Surface Deterioration.

    Science.gov (United States)

    El Gezawi, M; Kaisarly, D; Al-Saleh, H; ArRejaie, A; Al-Harbi, F; Kunzelmann, K H

    This study investigated the color stability and microhardness of five composites exposed to four beverages with different pH values. Composite discs were produced (n=10); Filtek Z250 (3M ESPE) and Filtek P90 (3M ESPE) were applied in two layers (2 mm, 20 seconds), and Tetric N-Ceram Bulk Fill (TetricBF, Ivoclar Vivadent) and SonicFill (Kerr) were applied in bulk (4 mm) and then light cured (40 seconds, Ortholux-LED, 1600 mW/cm 2 ). Indirect composite Sinfony (3M ESPE) was applied in two layers (2 mm) and cured (Visio system, 3M ESPE). The specimens were polished and tested for color stability; ΔE was calculated using spectrophotometer readings. Vickers microhardness (50 g, dwell time=45 seconds) was assessed on the top and bottom surfaces at baseline, 40 days of storage, subsequent repolishing, and 60 days of immersion in distilled water (pH=7.0), Coca-Cola (pH=2.3), orange juice (pH=3.75), or anise (pH=8.5) using scanning electron microscopy (SEM). The materials had similar ΔE values (40 days, p>0.05), but TetricBF had a significantly greater ΔE than P90 or SF (40 days). The ΔE was less for P90 and TetricBF than for Z250, SonicFill, and Sinfony (60 days). Repolishing and further immersion significantly affected the ΔE (pBulk-fill composites differ regarding color-stability and top-to-bottom microhardness changes compared with those of other composites. P90 showed better surface degradation resistance. In conclusion, bulk-fill composites are not promising alternatives to incremental and indirect composites regarding biodegradation.

  9. Note on the surface wave due to the prescribed elevation

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 62; Issue 1. Note on the surface wave due to the prescribed elevation. Niranjan Das. Brief Reports Volume 62 Issue 1 January 2004 pp 135-142. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/pram/062/01/0135-0142 ...

  10. Note on the surface wave due to the prescribed elevation

    Indian Academy of Sciences (India)

    oscillatory motion with the increase of time, leaving behind the highest elevation initially. On the other hand in case of spiral cyclonic motion for which the sea surface experiences the elliptical pressure distribution, the motion diminishes as g the ac- celeration due to gravity diminishes and oscillates with the variation of time.

  11. THE IMPACT OF THE DECISION OF THE COURT OF JUSTICE OF THE EUROPEAN UNION IN CASE C-461/13 REGARDING THE NOTION OF “DETERIORATION OF THE STATUS” OF A BODY OF SURFACE WATER

    Directory of Open Access Journals (Sweden)

    Cristiana Mic-Soare

    2015-11-01

    Full Text Available The necessity of this analysis results following the recent decision passed by the Court of Justice of the European Union interpreting a fundamental provision of the Water Framework Directive 2000/60/CE, art. 4 para. (1 lit. (a pt. (i-(iii. The decision's importance arises mainly due to the foreseen impact on projects developed on bodies of surface water. Thus, one of the potentially affected areas is that of micro-hydropower plants, since the fall by one class of any quality element, even if this does not determine a fall in classification of the body of surface water as a whole, breaches the obligation not to deteriorate the status of a body of surface water. If the affected quality element is already in the lowest class, any degradation breaches the said obligation. This interpretation's impact is even higher, as the Court concluded that the analyzed provisions imply the states' obligation to refuse authorizing projects that could cause the deterioration of the status of a body of surface water or that impact on the attainment of good surface water status or of good ecological potential and good surface water chemical status. The main scientific research methods used are the comparative, logical, historical and sociological methods.

  12. The Impedance Due to the Roughness of Metallic Surface

    Energy Technology Data Exchange (ETDEWEB)

    Bane, Karl L.F.; Chao, Alex W.; Ng, Cho-K.; /SLAC

    2011-08-26

    In some future accelerator designs, such as that of the Linear Coherent Light Source (LCLS), the bunch is very short, with an rms length on the order of 10's of microns, and the effective skin depth of the vacuum chamber walls can be very small compared to 1 micron. If the skin depth is small compared to the scale of the surface roughness then the wakefield due to the walls will be dominated by the roughness, and not by the wall resistance. To estimate the wakefields of a rough, metallic surface we begin with a simple, analytical model. Then we apply the MAFIA 3-dimensional, time-domain computer module, T3 to check and find the correct coefficient for the model.

  13. Postseismic surface deformations due to lithospheric and asthenospheric viscoelasticity

    Science.gov (United States)

    Cohen, S. C.

    1979-01-01

    This paper proposes a model for postseismic surface deformations by attributing them to lithospheric and asthenospheric viscoelasticity. The model predicts that the deformations due to lithospheric viscoelasticity depend on the decrease in the effective shear modulus acting long after the lithospheric relaxation compared to that acting immediately following the earthquake. While such deformations are generally smaller than those associated with asthenospheric viscoelasticity, they occur on a shorter time scale and may be in opposite direction to both the motion occurring at the time of the earthquake and that occurring as the asthenospheric relaxation occurs.

  14. Boussinesq modeling of surface waves due to underwater landslides

    Directory of Open Access Journals (Sweden)

    D. Dutykh

    2013-05-01

    Full Text Available Consideration is given to the influence of an underwater landslide on waves at the surface of a shallow body of fluid. The equations of motion that govern the evolution of the barycenter of the landslide mass include various dissipative effects due to bottom friction, internal energy dissipation, and viscous drag. The surface waves are studied in the Boussinesq scaling, with time-dependent bathymetry. A numerical model for the Boussinesq equations is introduced that is able to handle time-dependent bottom topography, and the equations of motion for the landslide and surface waves are solved simultaneously. The numerical solver for the Boussinesq equations can also be restricted to implement a shallow-water solver, and the shallow-water and Boussinesq configurations are compared. A particular bathymetry is chosen to illustrate the general method, and it is found that the Boussinesq system predicts larger wave run-up than the shallow-water theory in the example treated in this paper. It is also found that the finite fluid domain has a significant impact on the behavior of the wave run-up.

  15. MO-F-CAMPUS-J-05: Using 2D Relative Gamma Analysis From EPID Image as a Predictor of Plan Deterioration Due to Anatomical Changes

    Energy Technology Data Exchange (ETDEWEB)

    Piron, O; Varfalvy, N; Archambault, L [Departement de radio-oncologie et axe oncologie du centre de recherche du CHU de Quebec, CHU de Quebec, QC (Canada); Departement de physique, genie physique et d’optique et Centre de recherche sur le cancer, Universite Laval, QC (Canada)

    2015-06-15

    Purpose: One of the side effects of radiotherapy for head and neck (H&N) cancer is the patient’s anatomical changes. The changes can strongly affect the planned dose distribution. In this work, our goal is to demonstrate that relative analysis of EPID images is a fast and simple method to detect anatomical changes that can have a strong dosimetric impact on the treatment plan for H&N patients. Methods: EPID images were recorded at every beam and all fractions for 50 H&N patients. Of these, five patients that showed important anatomical changes were selected to evaluate dosimetric impacts of these changes and to correlate them with a 2D relative gamma analysis of EPID images. The planning CT and original contours were deformed onto CBCTs (one mid treatment and one at the end of treatment). By using deformable image registration, it was possible to map accurate CT numbers from the planning CT to the anatomy of the day obtained with CBCTs. Clinical treatment plan were then copied on the deformed dataset and dose was re-computed. In parallel, EPID images were analysed using the gamma index (3%3mm) relative to the first image. Results: It was possible to divide patients in two distinct, statistically different (p<0.001) categories using an average gamma index of 0.5 as a threshold. Below this threshold no significant dosimetric degradation of the plan are observed. Above this threshold two types of plan deterioration were seen: (1) target dose increases, but coverage remains adequate while dose to at least one OAR increases beyond tolerances; (2) the OAR doses remain low, but the target dose is reduced and coverage becomes inadequate. Conclusion: Relative analysis gamma of EPID images could indeed be a fast and simple method to detect anatomical changes that can potentially deteriorates treatment plan for H&N patients. This work was supported in part by Varian Medical System.

  16. Enhancement of surface magnetism due to bulk bond dilution

    International Nuclear Information System (INIS)

    Tsallis, C.; Sarmento, E.F.; Albuquerque, E.L. de

    1985-01-01

    Within a renormalization group scheme, the phase diagram of a semi-infinite simple cubic Ising ferromagnet is discussed, with arbitrary surface and bulk coupling constants, and including possible dilution of the bulk bonds. It is obtained that dilution makes easier the appearance of surface magnetism in the absence of bulk magnetism. (Author) [pt

  17. Atmospheric deterioration of clean surface of epitaxial (001)-YBaCuO films studied by low-energy electron diffraction

    International Nuclear Information System (INIS)

    Ohara, Tomoyuki; Sakuta, Ken; Kamishiro, Makio; Kobayashi, Takeshi

    1991-01-01

    The effects of gas exposure on the clean surface of the epitaxial YBaCuO thin films were closely investigated using the low-energy electron diffraction (LEED) method. The clean surface was obtained by in-vacuum annealing at 500degC. Once the clean surface was exposed to air, even at room temperature, the LEED spots disappeared or sometimes became faint. To ensure the degradation mechanism of the YBaCuO clean surface, the specimens were exposed to pure O 2 and N 2 gases separately and measured by LEED. As a result, it was found that O 2 is very safe but N 2 serves as a poisonous gas for the YBaCuO clean surface. (author)

  18. A possibility of avoiding surface roughness due to insects

    Science.gov (United States)

    Wortmann, F. X.

    1984-01-01

    Discussion of a method for eliminating turbulence caused by the formation of insect roughness upon the leading edges and fuselage, particularly in aircraft using BLC. The proposed technique foresees the use of elastic surfaces on which insect roughness cannot form. The operational characteristics of highly elastic rubber surface fastened to the wing leading edges and fuselage edges are examined. Some preliminary test results are presented. The technique is seen to be advantageous primarily for short-haul operations.

  19. The use of image analysis for determination of surface deterioration level of improved alumina based materials subjected to cavitation

    Directory of Open Access Journals (Sweden)

    Dimitrijević M.M.

    2013-01-01

    Full Text Available Alumina based specimens having different content of alumina based fibers were investigated for possible application as cavitation resistant material. Cavitation damages of the alumina based specimens were tested by the modified vibratory cavitation set up. Erosion rates were measured based on the method developed for metallic samples, mass loss was measured during the experiment. Surface erosion was determined during the experiment simultaneously to mass loss measurements. Image Pro Plus Program was applied for surface analysis during testing. Results indicate that investigated material exhibit excellent mechanical properties and very good resistance to cavitation erosion. [Projekat Ministarstva nauke Republike Srbije, br. TR34011, br. TR35002 i br. III 45012

  20. Factors influencing the deterioration of the carapace surface during the moult cycle of Carcinus maenas (Linnaeus, 1758)

    NARCIS (Netherlands)

    Greco, G.; Faimali, M.; Davenport, J.

    2014-01-01

    During its life cycle Carcinus maenas (Decapoda, Portunidae) goes through several phases of the moulting process (ecdysis) which allow it to grow despite having a rigid, non-living outer surface. As an individual approaches ecdysis, the exoskeletal calcium is solubilized (decalcification) from the

  1. Investigations of surface characterization of silicone rubber due to ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. In the present work, tracking phenomena has been studied with silicone rubber material under the. a.c. and d.c. voltages following IEC-587 standards. The surface condition of the tracked zone was analysed using wide angle X-ray diffraction (WAXD) and thermogravimetric differential thermal analysis (TG–DTA).

  2. Trapped surfaces due to concentration of gravitational radiation

    International Nuclear Information System (INIS)

    Beig, R.; O Murchadha, N.

    1991-01-01

    Sequences of global, asympotically flat solutions to the time-symmetric initial value constraints of general relativity in vacuo are constructed which develop outer trapped surfaces for large values of the argument. Thus all such configurations must gravitationally collapse. A new proof of the positivity of mass in the strong-field regime is also found. (Authors) 22 refs

  3. Bacterial Cell Surface Damage Due to Centrifugal Compaction

    NARCIS (Netherlands)

    Peterson, Brandon W.; Sharma, Prashant K.; van der Mei, Henny C.; Busscher, Henk J.

    Centrifugal damage has been known to alter bacterial cell surface properties and interior structures, including DNA. Very few studies exist on bacterial damage caused by centrifugation because of the difficulty in relating centrifugation speed and container geometry to the damage caused. Here, we

  4. Forces due to surface water measured by force microscopy. Consequences for anchoring biological cells to surfaces

    International Nuclear Information System (INIS)

    Schilcher, K.

    1997-05-01

    Interaction forces in 'Scanning Force Microscopy' (SFM). Force curves revealed exponentially decaying, attractive forces between silicon tip and silicon sample in aqueous media. Replacing the silicon sample by a sheet of mica, the interaction forces had both, an attractive and a repulsive component. Addition of salts generally reduced the forces. At 500 mM salt concentration, the attractive force became quantized with a residual force value of 23 pN. The attractive force is attributed to the gain in energy of water molecules which are released from surface water into free water during tip-sample approach. This conclusion is supported by a statistical model. The repulsive force contribution in the case of mica, is caused by hydration forces due to the spatial organization of crystalline water on the mica surface. Anchoring of biological cells. Molecular resolution of cell surfaces by SFM requires cell anchoring without interference with cell physiology. For this a novel strategy, 'hydrophobic anchoring' was designed. It avoids strong attractive forces between cell and by using a flexible spacer molecule. It establishes anchoring by a lipid (bound to the spacer), which weakly interacts with the hydrophobic core of the cell membrane. The method was subjected to tests using RBL-2H3, CH0 αβ and HEK-293 cells. The strength of cell anchoring was assayed by shear forces. In all cases 'hydrophobic anchoring' via a spacer caused elective anchoring much beyond controls. Such cell anchoring was employed for the imaging of RBL-2H3 cells by SFM. Images showed considerable finer details than images of loosely adsorbed cells. With about 50 rim resolution, SFM succeeded in imaging microvilli, filopodia, single cytoskeletal fibers (microtubules, microfilaments) and vesicles. In addition, as a consequence of cell stimulation upon ionomycin treatment, lamellae formation and the appearance of secretory granules on top of them were observed which indicates the viability of anchored

  5. Delayed neurological deterioration due to progressive pneumocephalus

    Directory of Open Access Journals (Sweden)

    Agrawal Amit

    2015-03-01

    Full Text Available Pneumocephalus can develop immediately following head trauma or clinical presentation may be delayed for days. We report a case of 35 year male whose initial CT scan brain plain small specks of pneumocephalus in left para-sellar region. However the next day he was complaining of severe headache and had multiple episodes of vomiting. Repeat CT scan showed increase in the size of pneumocephalus including appearance of intraventricular air with mild cerebral edema. The patient recovered well with conservative management. The present case is a gentle reminder that in a subgroup of head injury patients, intracranial air can produce significant mass effect leading to tension pneumocephalus which can can behave like other intracranial mass lesions and causes worsening of the neurological status of these patients.

  6. Influence of CAD-CAM diamond bur deterioration on surface roughness and maximum failure load of Y-TZP-based restorations.

    Science.gov (United States)

    Corazza, Pedro Henrique; de Castro, Humberto Lago; Feitosa, Sabrina Alves; Kimpara, Estevão Tomomitsu; Della Bona, Alvaro

    2015-04-01

    To investigate the influence of CAD-CAM diamond bur deterioration on surface roughness (Ra) and maximum failure load (Lf) of Y-TZP-based ceramic (YZ) substructures (SB) veneered with a feldspathic porcelain. Two sets of burs (B1 and B2) were used to fabricate 30 YZ SB each in a CAD/CAM system (Cerec InLab). The SB were identified (1-30) according to the milling sequence (MS). SEM images of the burs were recorded before milling, and after milling 15 and 30 SB. The SB Ra was measured. All SB were veneered, cemented onto a fiber reinforced epoxy resin die, and loaded to failure. Specimens from B1 group were cyclic fatigued (106 cycles) before loading to failure. Fractographic analysis was performed. Data were statistically analyzed using Student's t-test, Weibull analysis, Pearson's correlation and ANOVA (α= 0.05). The mean Ra value of B1 specimens was statistically greater than B2. Weibull modulus of B1 and B2 were statistically similar. The correlation between MS and Lf was not statistically significant for the groups. MS and Ra had significant correlation for both groups (B1: r= -0.514, P= 0.015; B2: r= -0.462, P= 0.03). Although the visual aspect (SEM) of the burs was similar after 30 millings, the mean Ra values were significantly different after 27 millings for B1 and 24 millings for B2.

  7. ASR DIAGNOSIS BY PETROGRAPHIC INVESTIGATION AND EVALUATION OF MECHANICAL PERFORMANCE OF ASR DETERIORATED PRETENSIONED PC BEAM

    Science.gov (United States)

    Tomiyama, Jun; Yamada, Kazuo; Kaneda, Kazuo; Iraha, Shigeo; Oshiro, Takeshi

    ASR diagnosis and evaluation of load carrying capacity have been performed on the pre-tensioned PC beam which was cut out of a national high way bridge. The bridge was replaced lately after 25years service due to ASR deterioration. Comprehensive investigations such as crack measurement, material strength test, petrographic investigation, beam bending test have been performed on the deteriorated beam. Cracks have been observed on all sides and the appearance has been classified as severe deterioration grade. Petrographic investigation concluded that the reacted mineral was mainly reactive cristobalite contained in andesite of fine aggregates and EPMA investigation found that the reaction seemed to be the final stage. The late expansive ASR has been superimposed by cryptocrystalline quartz in coarse aggregates and it is still in progress. Deteriorated concrete cores with no visual crack have reduced only 10% of compressive strength compared with design strength, but significant loss has been observed on the elastic modulus. The static bending load test on the deteriorated test beam showed 95% of design load capacity indicating that the visual deterioration on surfaces has affected slight damages at this moment. But loss of bending rigidity has been appeared on the deteriorated beam .after bending cracks have started. This comprehensive study including the petrographic diagnosis and the appraisal on mechanical performance of the deteriorated beam conclude that there is a possibility of ASR deterioration in progress and further loss of mechanical performance though the beam had some margin for loading capacity at this moment.

  8. Study on the deterioration mechanism of layered rock-salt electrodes using epitaxial thin films - Li(Ni, Co, Mn)O2 and their Zr-O surface modified electrodes

    Science.gov (United States)

    Abe, Machiko; Iba, Hideaki; Suzuki, Kota; Minamishima, Hiroaki; Hirayama, Masaaki; Tamura, Kazuhisa; Mizuki, Jun'ichiro; Saito, Tomohiro; Ikuhara, Yuichi; Kanno, Ryoji

    2017-03-01

    Deterioration mechanism of Li(Ni, Co, Mn)O2 and Zr-O surface modified electrodes has been elucidated using epitaxial thin films synthesized by pulsed laser deposition. The electrodes comprise a mixture of layered rock-salt and spinel phases. The deterioration mechanism is analyzed using cyclic voltammetry, in situ X-ray diffraction measurements, and in situ neutron reflectometry. The spinel phase in the electrodes has low electrochemical activity and is not involved in Li insertion/extraction. The amount of Li participating in the charge-discharge reactions in the layered rock-salt phase increases with cycling, inducing a phase change at the electrode surface, lowering the reversibility. In contrast, in the Zr-O surface modified electrode, the spinel phase does not increase on charging/discharging. Thus, the Zr-O modification stabilizes the surface of layered rock-salt structure, thereby improving the cycling characteristics. Also, after the Zr-O modification, the Li concentration in the liquid electrolyte near the electrode/electrolyte interface increases during charging/discharging. The Zr-O surface modification not only stabilizes the electrode surface but also causes changes on the electrolyte side. Using the mixed model electrodes, we elucidate the mechanism of electrode deterioration and the origin of the improvement in cycling characteristics occurring on surface modification.

  9. Quantifying the changes of soil surface microroughness due to rainfall impact on a smooth surface

    Directory of Open Access Journals (Sweden)

    B. K. B. Abban

    2017-09-01

    Full Text Available This study examines the rainfall-induced change in soil microroughness of a bare smooth soil surface in an agricultural field. The majority of soil microroughness studies have focused on surface roughness on the order of ∼ 5–50 mm and have reported a decay of soil surface roughness with rainfall. However, there is quantitative evidence from a few studies suggesting that surfaces with microroughness less than 5 mm may undergo an increase in roughness when subject to rainfall action. The focus herein is on initial microroughness length scales on the order of 2 mm, a low roughness condition observed seasonally in some landscapes under bare conditions and chosen to systematically examine the increasing roughness phenomenon. Three rainfall intensities of 30, 60, and 75 mm h−1 are applied to a smoothened bed surface in a field plot via a rainfall simulator. Soil surface microroughness is recorded via a surface-profile laser scanner. Several indices are utilized to quantify the soil surface microroughness, namely the random roughness (RR index, the crossover length, the variance scale from the Markov–Gaussian model, and the limiting difference. Findings show a consistent increase in roughness under the action of rainfall, with an overall agreement between all indices in terms of trend and magnitude. Although this study is limited to a narrow range of rainfall and soil conditions, the results suggest that the outcome of the interaction between rainfall and a soil surface can be different for smooth and rough surfaces and thus warrant the need for a better understanding of this interaction.

  10. Defining clinical deterioration.

    Science.gov (United States)

    Jones, Daryl; Mitchell, Imogen; Hillman, Ken; Story, David

    2013-08-01

    To review literature reporting adverse events and physiological instability in order to develop frameworks that describe and define clinical deterioration in hospitalised patients. Literature review of publications from 1960 to August 2012. Conception and refinement of models to describe clinical deterioration based on prevailing themes that developed chronologically in adverse event literature. We propose four frameworks or models that define clinical deterioration and discuss the utility of each. Early attempts used retrospective chart review and focussed on the end result of deterioration (adverse events) and iatrogenesis. Subsequent models were also retrospective, but used discrete complications (e.g. sepsis, cardiac arrest) to define deterioration, had a more clinical focus, and identified the concept of antecedent physiological instability. Current models for defining clinical deterioration are based on the presence of abnormalities in vital signs and other clinical observations and attempt to prospectively assist clinicians in predicting subsequent risk. However, use of deranged vital signs in isolation does not consider important patient-, disease-, or system-related factors that are known to adversely affect the outcome of hospitalised patients. These include pre-morbid function, frailty, extent and severity of co-morbidity, nature of presenting illness, delays in responding to deterioration and institution of treatment, and patient response to therapy. There is a need to develop multiple-variable models for deteriorating ward patients similar to those used in intensive care units. Such models may assist clinician education, prospective and real-time patient risk stratification, and guide quality improvement initiatives that prevent and improve response to clinical deterioration. Crown Copyright © 2013. Published by Elsevier Ireland Ltd. All rights reserved.

  11. Bridge element deterioration rates.

    Science.gov (United States)

    2008-10-01

    This report describes the development of bridge element deterioration rates using the NYSDOT : bridge inspection database using Markov chains and Weibull-based approaches. It is observed : that Weibull-based approach is more reliable for developing b...

  12. Concrete pavement joint deterioration.

    Science.gov (United States)

    2015-12-01

    Concrete pavements are an important part of our national infrastructure. In recent years the relatively small number of reported joints deteriorating prematurely in concrete pavements around Indiana has increased. Changes over the past 45 years in IN...

  13. Isopleths of surface air concentration and surface air kerma rate due to a radioactive cloud released from a stack (3)

    International Nuclear Information System (INIS)

    Tachibana, Haruo; Kikuchi, Masamitsu; Sekita, Tsutomu; Yamaguchi, Takenori

    2004-06-01

    This report is a revised edition of 'Isopleths of Surface Air Concentration and Surface Air Absorbed Dose Rate due to a Radioactive Cloud Released from a Stack(II) '(JAERI-M 90-206) and based on the revised Nuclear Safety Guidelines reflected the ICRP1990 Recommendation. Characteristics of this report are the use of Air Karma Rate (Gy/h) instead of Air Absorbed Dose Rate (Gy/h), and the record of isopleths of surface air concentration and surface air karma rate on CD-ROM. These recorded data on CD-ROM can be printed out on paper and/or pasted on digital map by personal computer. (author)

  14. Quality factor due to roughness scattering of shear horizontal surface acoustic waves in nanoresonators

    NARCIS (Netherlands)

    Palasantzas, G.

    2008-01-01

    In this work we study the quality factor associated with dissipation due to scattering of shear horizontal surface acoustic waves by random self-affine roughness. It is shown that the quality factor is strongly influenced by both the surface roughness exponent H and the roughness amplitude w to

  15. Cable deterioration analysis method

    International Nuclear Information System (INIS)

    Sugiyama, Masahiko; Nitta, Makoto.

    1997-01-01

    At first, a hardness of a minute region and an elongation at break are measured relative to a plurality of reference samples having deterioration which is different stepwise, to obtain a relation between the hardness of the minute region and the elongation at break. They are obtained as information of correlation showing the degree of deterioration of cables. Then, samples are collected. The samples are collected from a PVC sheath. In this case, the samples to be used for the measurement are extremely small piece having the size of one side of about several hundred μm. Then, the hardness of the minute region of the samples is measured. The measured hardness of the minute region is corresponded to the previously obtained information of the correlation for deteriorations to judge the state of deterioration for the collected samples. With such procedures, the state of deterioration for electric wires and cables to be used in nuclear facilities such as power plants can easily be diagnosed substantially non destructively. (I.N.)

  16. Deterioration of polymethyl methacrylate dentures in the oral cavity.

    Science.gov (United States)

    Matsuo, Hiroshi; Suenaga, Hanako; Takahashi, Masatoshi; Suzuki, Osamu; Sasaki, Keiichi; Takahashi, Nobuhiro

    2015-01-01

    Polymethyl methacrylate (PMMA)-made prostheses used in the oral cavity were evaluated by multimodal assessment in order to elucidate the biodeterioration of PMMA. In used dentures (UD), the micro-Vickers hardness of the polished denture surface and denture basal surface was lower than that of the torn surface (p<0.05), whereas the shaved surface approximately 100 µm from the polished surface showed a similar value to the torn surface. By contrast, there were no differences among these surfaces in new resin (NR). The volatile content of UD was higher than that of NR (p<0.05). Component analysis by ATR-FTIR showed specific spectra (1,700-1,400 cm(-1)) only in UD. This study revealed that PMMA deteriorated during long-term use in the oral cavity in terms of hardness and volatile content with component alteration, and suggests the involvement of biodeterioration, possibly due to saliva and oral microbiota.

  17. Visualising Deteriorating Conditions

    Directory of Open Access Journals (Sweden)

    Tom Andrews, RN, B.Sc. (Hons, M.Sc., Ph.D.

    2005-03-01

    Full Text Available The research aims were to investigate the difficulties ward staff experienced in detecting deterioration and how these were resolved. The emphasis within the literature tends to be on identifying premonitory signs that may be useful in predicting deterioration. Changes in respiratory rate is the most consistent of these (Fieselmann et al. 1993; Sax and Charlson 1987; Schein et al. 1990; Smith and Wood 1998 but in common with other signs, it lacks sensitivity and specificity. The sample consisted of 44 nurses, doctors (Interns and health care support workers from a general medical and surgical ward. Data were collected by means of nonparticipant observations and interviews, using grounded theory as originated by (Glaser and Strauss 1967 and (Glaser 1978. As data were collected, the constant comparative method and theoretical sensitivity were used as outlined in grounded theory. A core category of “visualising deteriorating conditions” emerged, together with its sub-core categories of “intuitive knowing”, “baselining” and “grabbing attention”.The main concern in visualising deteriorating conditions is to ensure that patients suspected of deterioration are successfully referred to medical staff. The aim is to convince those who can treat or prevent further deterioration to intervene. Through intuitive knowing they pick up that patients have changed in a way that requires a medical assessment. To make the referral more credible, nurses attempt to contextualise any changes in patients by baselining (establishing baselines. Finally with the backup of colleagues, nurses refer patients by providing as much persuasive information as possible in a way that grabs attention. The whole process is facilitated by knowledge and experience, together with mutual trust and respect.

  18. Surface and Internal Waves due to a Moving Load on a Very Large Floating Structure

    Directory of Open Access Journals (Sweden)

    Taro Kakinuma

    2012-01-01

    Full Text Available Interaction of surface/internal water waves with a floating platform is discussed with nonlinearity of fluid motion and flexibility of oscillating structure. The set of governing equations based on a variational principle is applied to a one- or two-layer fluid interacting with a horizontally very large and elastic thin plate floating on the water surface. Calculation results of surface displacements are compared with the existing experimental data, where a tsunami, in terms of a solitary wave, propagates across one-layer water with a floating thin plate. We also simulate surface and internal waves due to a point load, such as an airplane, moving on a very large floating structure in shallow water. The wave height of the surface or internal mode is amplified when the velocity of moving point load is equal to the surface- or internal-mode celerity, respectively.

  19. Deterioration of Concrete Structures

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Chloride ingress is a common cause of deterioration of reinforced concrete bridges. Concrete may be exposed to chloride by seawater or de-icing salts. The chloride initiates corrosion of the reinforcement, which through expansion disrupts the concrete. In addition, the corrosion reduces the cross...

  20. Solid-solid contacts due to surface roughness and their effects on suspension behaviour.

    Science.gov (United States)

    Davis, Robert H; Zhao, Yu; Galvin, Kevin P; Wilson, Helen J

    2003-05-15

    Solid-solid contacts due to microscopic surface roughness in viscous fluids were examined by observing the translational and rotational behaviours of a suspended sphere falling past a lighter sphere or down an inclined surface. In both cases, a roll-slip behaviour was observed, with the gravitational forces balanced by not only hydrodynamic forces but also normal and tangential solid-solid contact forces. Moreover, the nominal separation between the surfaces due to microscopic surface roughness elements is not constant but instead varies due to multiple roughness scales. By inverting the system, so that the heavy sphere fell away from the lighter sphere or the plane, it was found that the average nominal separation increases with increasing angle of inclination of the plane or the surface of the lighter sphere from horizontal; the larger asperities lift the sphere up from the opposing surface and then gravity at large angles of inclination is too weak to pull the sphere back down to the opposing surface before another large asperity is encountered. The existence of microscopic surface roughness and solid-solid contacts is shown to modify the rheological properties of suspensions. For example, the presence of compressive, but not tensile, contact forces removes the reversibility of sphere-sphere interactions and breaks the symmetry of the particle trajectories. As a result, suspensions of rough spheres exhibit normal stress differences that are absent for smooth spheres. For the conditions studied, surface roughness reduces the effective viscosity of a suspension by limiting the lubrication resistance during near-contact motion, and it also modifies the suspension microstructure and hydrodynamic diffusivity.

  1. Surface changes of poly-L-lactic acid due to annealing

    Science.gov (United States)

    Juřík, P.; Michaljaničová, I.; Slepička, P.; Kolskáa, Z.; Švorčík, V.

    2017-11-01

    Surface modifications are very important part of both current cutting-edge research and modern manufacturing. Our research is focused on poly-L-lactic acid, which is biocompatible and biodegradable polymer that offers applications in modern medicine. We observed morphological changes of the surface of metalized samples due to annealing and studied effect of modifications on total surface area and pore surface and volume. We observed that annealing of non-metalized samples had most pronounced effect up to the 70°C, after which all observed parameters dropped significantly. Metallization has changed behaviour of the samples significantly and resulted in generally lower surface area and porosity when compared to non-metalized samples.

  2. Anomalous surface behavior of hydrated guanidinium ions due to ion pairing

    Science.gov (United States)

    Ekholm, Victor; Vazdar, Mario; Mason, Philip E.; Bialik, Erik; Walz, Marie-Madeleine; Öhrwall, Gunnar; Werner, Josephina; Rubensson, Jan-Erik; Jungwirth, Pavel; Björneholm, Olle

    2018-04-01

    Surface affinity of aqueous guanidinium chloride (GdmCl) is compared to that of aqueous tetrapropylammonium chloride (TPACl) upon addition of sodium chloride (NaCl) or disodium sulfate (Na2SO4). The experimental results have been acquired using the surface sensitive technique X-ray photoelectron spectroscopy on a liquid jet. Molecular dynamics simulations have been used to produce radial distribution functions and surface density plots. The surface affinities of both TPA+ and Gdm+ increase upon adding NaCl to the solution. With the addition of Na2SO4, the surface affinity of TPA+ increases, while that of Gdm+ decreases. From the results of MD simulations it is seen that Gdm+ and SO4 2 - ions form pairs. This finding can be used to explain the decreased surface affinity of Gdm+ when co-dissolved with SO4 2 - ions. Since SO4 2 - ions avoid the surface due to the double charge and strong water interaction, the Gdm+-SO4 2 - ion pair resides deeper in the solutions' bulk than the Gdm+ ions. Since TPA+ does not form ion pairs with SO4 2 -, the TPA+ ions are instead enriched at the surface.

  3. Vibrational excitation in molecule--surface collisions due to temporary negative molecular ion formation

    International Nuclear Information System (INIS)

    Gadzuk, J.W.

    1983-01-01

    Inelastic electron scattering from gaseous and physisorbed diatomic molecules results in greatly enhanced vibrational overtone excitation if the incident electron has the appropriate energy to form a shape-resonance-induced temporary negative molecular ion. It is proposed here that due to the image potential lowering of the electron affinity level of a diatomic molecule in interaction with a metal surface, somewhere outside the surface an incident molecule would find its affinity level degenerate with or lower than the substrate Fermi level at which point a substrate electron could hop onto the molecule, in analogy with gas phase harpooning processes. A negative molecular ion is thus formed which remains until the molecular ion reflects from the surface and the affinity level rises above the Fermi level, thus permitting reverse electron hopping back into the metal. The lifetime of the molecular ion can be controlled by varying both the kinetic energy of the incident molecule and also the substrate work function. In analogy with the electron scattering events, greatly enhanced vibrational excitation of overtones is expected in the molecules of the scattered beam. Induced fluorescence probing of the vibrational state distribution should then yield fundamental information pertaining to the dynamics of charge transfer reactions and nonadiabatic effects in molecule--surface interactions. A theory of this phenomenon is here presented together with the numerical consequences for a model system designed to simulate N 2 or NO scattering from standard surface science metal surfaces

  4. Nonlinear radiation of waves at combination frequencies due to radiation-surface wave interaction in plasmas

    International Nuclear Information System (INIS)

    El Naggar, I.A.; Hussein, A.M.; Khalil, Sh.M.

    1992-09-01

    Electromagnetic waves radiated with combination frequencies from a semi-bounded plasma due to nonlinear interaction of radiation with surface wave (both of P-polarization) has been investigated. Waves are radiated both into vacuum and plasma are found to be P-polarized. We take into consideration the continuity at the plasma boundary of the tangential components of the electric field of the waves. The case of normal incidence of radiation and rarefield plasma layer is also studied. (author). 7 refs

  5. Assessment of surface and subsurface ground disturbance due to underground mining

    International Nuclear Information System (INIS)

    Khair, A.W.

    1994-01-01

    This paper presents highlights of the research carried out at West Virginia University in order to assess surface and subsurface ground disturbance due to longwall mining. Extensive instrumentation and measurements have been made over three longwall mines in northern West Virginia during a three-year period. Various monitoring techniques including full profile borehole extensometer, full profile borehole inclinometers, time domain reflectometry, sonic reflection technique, a unique mechanical grouting method, photographic and visual observations, standard surveying, and water-level measurements were utilized. The paper's emphasis is first on surface ground movement and its impact on integrity of surface ground and structures and second on type and magnitude of subsurface ground movements associated with mine geometry and geology. A subsidence prediction model based on implementation of both mechanisms of ground movement around the excavation and the geologic and geotechnical properties of the rock/coal surrounding the excavation has been developed. 8 refs., 14 figs., 1 tab

  6. Damping of short gravity-capillary waves due to oil derivatives film on the water surface

    Science.gov (United States)

    Sergievskaya, Irina; Ermakov, Stanislav; Lazareva, Tatyana

    2016-10-01

    In this paper new results of laboratory studies of damping of gravity-capillary waves on the water surface covered by kerosene are presented and compared with our previous analysis of characteristics of crude oil and diesel fuel films. Investigations of kerosene films were carried out in a wide range values of film thicknesses (from some hundreds millimetres to a few millimetres) and in a wide range of surface wave frequencies (from 10 to 27 Hz). The selected frequency range corresponds to the operating wavelengths of microwave, X- to Ka-band radars typically used for the ocean remote sensing. The studied range of film thickness covers typical thicknesses of routine spills in the ocean. It is obtained that characteristics of waves, measured in the presence of oil derivatives films differ from those for crude oil films, in particular, because the volume viscosity of oil derivatives and crude oil is strongly different. To retrieve parameters of kerosene films from the experimental data the surface wave damping was analyzed theoretically in the frame of a model of two-layer fluid. The films are assumed to be soluble, so the elasticity on the upper and lower boundaries is considered as a function of wave frequency. Physical parameters of oil derivative films were estimated when tuning the film parameters to fit theory and experiment. Comparison between wave damping due to crude oil, kerosene and diesel fuel films have shown some capabilities of distinguishing of oil films from remote sensing of short surface waves.

  7. Investigations of surface-tension effects due to small-scale complex boundaries

    Science.gov (United States)

    Feng, Jiansheng

    In this Ph.D. dissertation, we have investigated some important surface-tension phenomena including capillarity, wetting, and wicking. We mainly focus on the geometric aspects of these problems, and to learn about how structures affect properties. . In the first project (Chapter 2), we used numerical simulations and experiments to study the meniscus of a fluid confined in capillaries with complicated cross-sectional geometries. In the simulations, we computed the three-dimensional shapes of the menisci formed in polygonal and star-shaped capillaries with sharp or rounded corners. Height variations across the menisci were used to quantify the effect of surface tension. Analytical solutions were derived for all the cases where the cross-sectional geometry was a regular polygon or a regular star-shape. Power indices that characterize the effects of corner rounding were extracted from simulation results. These findings can serve as guide for fabrications of unconventional three-dimensional structures in Capillary Force Lithography experiments. Experimental demonstrations of the working principle was also performed. Although quantitative matching between simulation and experimental results was not achieved due to the limitation of material properties, clear qualitative trends were observed and interesting three-dimensional nano-structures were produced. A second project (Chapter 3) focused on developing techniques to produce three-dimensional hierarchically structured superhydrophobic surfaces with high aspect ratios. We experimented with two different high-throughput electron-beam-lithography processes featuring single and dual electron-beam exposures. After a surface modification procedure with a hydrophobic silane, the structured surfaces exhibited two distinct superhydrophobic behaviors---high and low adhesion. While both types of superhydrophobic surfaces exhibited very high (approximately 160° water advancing contact angles, the water receding contact angles on

  8. Robust design optimization method for centrifugal impellers under surface roughness uncertainties due to blade fouling

    Science.gov (United States)

    Ju, Yaping; Zhang, Chuhua

    2016-03-01

    Blade fouling has been proved to be a great threat to compressor performance in operating stage. The current researches on fouling-induced performance degradations of centrifugal compressors are based mainly on simplified roughness models without taking into account the realistic factors such as spatial non-uniformity and randomness of the fouling-induced surface roughness. Moreover, little attention has been paid to the robust design optimization of centrifugal compressor impellers with considerations of blade fouling. In this paper, a multi-objective robust design optimization method is developed for centrifugal impellers under surface roughness uncertainties due to blade fouling. A three-dimensional surface roughness map is proposed to describe the nonuniformity and randomness of realistic fouling accumulations on blades. To lower computational cost in robust design optimization, the support vector regression (SVR) metamodel is combined with the Monte Carlo simulation (MCS) method to conduct the uncertainty analysis of fouled impeller performance. The analyzed results show that the critical fouled region associated with impeller performance degradations lies at the leading edge of blade tip. The SVR metamodel has been proved to be an efficient and accurate means in the detection of impeller performance variations caused by roughness uncertainties. After design optimization, the robust optimal design is found to be more efficient and less sensitive to fouling uncertainties while maintaining good impeller performance in the clean condition. This research proposes a systematic design optimization method for centrifugal compressors with considerations of blade fouling, providing a practical guidance to the design of advanced centrifugal compressors.

  9. Structural and surface changes in glassy carbon due to strontium implantation and heat treatment

    Science.gov (United States)

    Odutemowo, O. S.; Malherbe, J. B.; Prinsloo, L. C.; Njoroge, E. G.; Erasmus, R.; Wendler, E.; Undisz, A.; Rettenmayr, M.

    2018-01-01

    There are still questions around the microstructure of glassy carbon (GC), like the observation of the micropores. These were proposed to explain the low density of GC. This paper explains the effect of ion bombardment (200 keV Sr+, 1 × 1016 Sr+/cm2 at RT) on the microstructure of GC. TEM and AFM show that micropores in pristine GC are destroyed leading to densification of GC from 1.42 g/cm3 to 2.03 g/cm3. The amorphisation of glassy carbon was also not complete with graphitic strands embedded within the GC. These were relatively few, as Raman analysis showed that the Sr implantation resulted in a typical amorphous Raman spectrum. Annealing of the sample at 900 °C only resulted in a slight recovery of the GC structure. AFM and SEM analysis showed that the surface of the sample became rougher after Sr implantation. The roughness increased after the sample was annealed at 600 °C due to segregation of Sr towards the surface of the GC. SEM measurements of a sample with both implanted and un-implanted edges after annealing at 900 °C, showed that the high temperature heat treatment did not affect the surface topography of un-irradiated GC.

  10. Spatial Variation of Surface Energy Fluxes Due to Land Use Changes across China

    Directory of Open Access Journals (Sweden)

    Enjun Ma

    2014-04-01

    Full Text Available We estimate the heat flux changes caused by the projected land transformation over the next 40 years across China to improve the understanding of the impacts of land dynamics on regional climate. We use the Weather Research and Forecasting (WRF model to investigate these impacts in four representative land transformation zones, where reclamation, overgrazing, afforestation, and urbanization dominates the land use and land cover changes in each zone respectively. As indicated by the significant variance of albedo due to different land use and cover changes, different surface properties cause great spatial variance of the surface flux. From the simulation results, latent heat flux increases by 2 and 21 W/m2 in the reclamation and afforestation regions respectively. On the contrary, overgrazing and urban expansion results in decrease of latent heat flux by 5 and 36 W/m2 correspondingly. Urban expansion leads to an average increase of 40 W/m2 of sensible heat flux in the future 40 years, while reclamation, afforestation, as well as overgrazing result in the decrease of sensible heat flux. Results also show that reclamation and overgrazing lead to net radiation decrease by approximately 4 and 7 W/m2 respectively, however, afforestation and urbanization lead to net radiation increase by 6 and 3 W/m2 respectively. The simulated impacts of projected HLCCs on surface energy fluxes will inform sustainable land management and climate change mitigation.

  11. Ground Surface Deformation around Tehran due to Groundwater Recharge: InSAR Monitoring.

    Science.gov (United States)

    Gourmelen, N.; Peyret, M.; Fritz, J. F.; Cherry, J.

    2003-04-01

    Tehran is located on an active tectonic and seismic zone. The surface deformation monitoring provides a powerful tool for getting a better understanding of faults kinematics and mechanisms. Used in conjunction with GPS networks, InSAR (Interferometric Synthetic Aperture Radar) provides dense and precise deformation measurements which are essential for mapping complex heterogeneous deformation fields. Moreover, urban and arid areas preserve interferometric phase coherence. The archived acquisitions of ERS that span 9 months between September 1998 and June 1999 reveal wide areas of surface uplift (by as much as 9 cm). This vertical deformation (gradual in time) has probably no tectonic meaning but is rather the ground response to ground water recharge. These zones are all located dowstream of large alluvial fans like the one of Karaj. The variation of effective stress caused by intersticial water draining could explain such surface deformation. It can also be noticed that some faults act as boundary for these deformation zones and fluid motion. The understanding of this deformation is relevant for groundwater monitoring and urban developement management. It is also necessary for discriminating it from tectonic deformation that also occurs on this zone. Due to the lack of attitude control of satellite ERS-2 since February 2001, the last images acquired could not be combined with the former acquisitions. Nevertheless, we expect to be able to enrich our set of images in order to map tectonic deformation on a longer period and to monitor in a more continuous way the deformation due to groundwater evolution. This would allow to quantify the permanent and reversible part of this signal.

  12. Temperature dependent surface modification of molybdenum due to low energy He+ ion irradiation

    International Nuclear Information System (INIS)

    Tripathi, J.K.; Novakowski, T.J.; Joseph, G.; Linke, J.; Hassanein, A.

    2015-01-01

    In this paper, we report on the temperature dependent surface modifications in molybdenum (Mo) samples due to 100 eV He + ion irradiation in extreme conditions as a potential candidate to plasma-facing components in fusion devices alternative to tungsten. The Mo samples were irradiated at normal incidence, using an ion fluence of 2.6 × 10 24 ions m −2 (with a flux of 7.2 × 10 20 ions m −2 s −1 ). Surface modifications have been studied using high-resolution field emission scanning electron-(SEM) and atomic force (AFM) microscopy. At 773 K target temperature homogeneous evolution of molybdenum nanograins on the entire Mo surface were observed. However, at 823 K target temperature appearance of nano-pores and pin-holes nearby the grain boundaries, and Mo fuzz in patches were observed. The fuzz density increases significantly with target temperatures and continued until 973 K. However, at target temperatures beyond 973 K, counterintuitively, a sequential reduction in the fuzz density has been seen till 1073 K temperatures. At 1173 K and above temperatures, only molybdenum nano structures were observed. Our temperature dependent studies confirm a clear temperature widow, 823–1073 K, for Mo fuzz formation. Ex-situ high resolution X-ray photoelectron spectroscopy studies on Mo fuzzy samples show the evidence of MoO 3 3d doublets. This elucidates that almost all the Mo fuzz were oxidized during open air exposure and are thick enough as well. Likewise the microscopy studies, the optical reflectivity measurements also show a sequential reduction in the reflectivity values (i.e., enhancement in the fuzz density) up to 973 K and after then a sequential enhancement in the reflectivity values (i.e., reduction in the fuzz density) with target temperatures. This is in well agreement with microscopy studies where we observed clear temperature window for Mo fuzz growth

  13. Deterioration Assessment of Bridge Rubber Bearings

    OpenAIRE

    Gu, Haosheng; 伊藤, 義人; Itoh, Yoshito

    2005-01-01

    Natural rubber (NR) with lead plugs and high damping rubber (HDR) are often used for base-isolated rubber bearings. However, it is usually known that ageing causes rubber performance to drop. This research is to study the deterioration characteristics of these two kinds of bridge rubber bearings through accelerated thermal oxidation tests. The property variations inside the aged rubber blocks are investigated. For natural rubber bearing, the mechanical properties on the surface change the mos...

  14. Microstructural changes due to laser surface melting of an AISI 304 stainless steel

    Directory of Open Access Journals (Sweden)

    d?Oliveira A.S.C.M.

    2001-01-01

    Full Text Available Several techniques can be used to improve surface properties. These can involve changes on the surface chemical composition (such as alloying and surface welding processes or on the surface microstructure, such as hardening and melting. In the present work surface melting with a 3kW CO2 cw laser was done to alter surface features of an AISI 304 stainless steel. Microstructure characterisation was done by optical and scanning electron microscopy. Vickers and Knoop microhardness tests evaluated mechanical features after surface melting. Phase transformation during rapid solidification is analysed and discussed.

  15. Performance assessment of deteriorated and retrofitted steel HP piles.

    Science.gov (United States)

    2016-06-01

    Steel piles are known to deteriorate at high rates in Nebraska, partially as a result of exposure to weathering, and partially due to corrosive soils. The Nebraska Department of Roads (NDOR) employs a reinforced concrete jacket to slow the progressio...

  16. Influence of the surface quality due to a hole derived in initial material processing of cold sheets with drawing

    OpenAIRE

    Cvetkov, Slavco; Kocov, Atanas

    2010-01-01

    A research was performed about the influence of the surface quality due to a hole derived in initial material processing of cold-rolled steel sheets with drawing. This influence was researched through the surface quality obtained bu the type of preparation of the hole surface without prejudice to the precise measurement of the achieved quality (asperity). the aim is to indicate how the type of manufacturing the holes can improve the workability of cold-rolled sheets and help solve technical p...

  17. Development of a new mathematical model for prediction of surface subsidence due to inclined coal-seam mining

    Energy Technology Data Exchange (ETDEWEB)

    Asadi, A.; Shahriar, K.; Goshtasbi, K.; Najm, K. [Islam Azad University, Tehran (Iran). Dept. of Mining Engineering

    2005-01-01

    Subsidence phenomenon as an unwanted consequence of underground mining can cause problems for environment and surface structures in mine area. Surface subsidence prediction for inclined and steep seams has been given less attention than horizontal seams due to the difficulties involved in the extraction of such coal-seams. This paper introduces a new profile function method for prediction of surface subsidence due to inclined coal-seam mining. The results of calculation with the new function indicate that the predicted value has good agreement with the measured data.

  18. Hydrogen generation due to water splitting on Si - terminated 4H-Sic(0001) surfaces

    Science.gov (United States)

    Li, Qingfang; Li, Qiqi; Yang, Cuihong; Rao, Weifeng

    2018-02-01

    The chemical reactions of hydrogen gas generation via water splitting on Si-terminated 4H-SiC surfaces with or without C/Si vacancies were studied by using first-principles. We studied the reaction mechanisms of hydrogen generation on the 4H-SiC(0001) surface. Our calculations demonstrate that there are major rearrangements in surface when H2O approaches the SiC(0001) surface. The first H splitting from water can occur with ground-state electronic structures. The second H splitting involves an energy barrier of 0.65 eV. However, the energy barrier for two H atoms desorbing from the Si-face and forming H2 gas is 3.04 eV. In addition, it is found that C and Si vacancies can form easier in SiC(0001)surfaces than in SiC bulk and nanoribbons. The C/Si vacancies introduced can enhance photocatalytic activities. It is easier to split OH on SiC(0001) surface with vacancies compared to the case of clean SiC surface. H2 can form on the 4H-SiC(0001) surface with C and Si vacancies if the energy barriers of 1.02 and 2.28 eV are surmounted, respectively. Therefore, SiC(0001) surface with C vacancy has potential applications in photocatalytic water-splitting.

  19. Investigation the effects of metallic substrate surfaces due to ion-plasma treatment

    International Nuclear Information System (INIS)

    Shulaev, V.M.; Taran, V.S.; Timoshenko, A.I.; Gasilin, V.V.

    2011-01-01

    It has been found correlation between modification effects and duration of ion-plasma cleaning the substrate surface with titanium ions. Experiments were carried out using serial vacuum-arc equipment ''Bulat-6'' at the stationary mode in non-filtered titanium plasma, which contained considerable quantity of evaporated material droplets. The polished cylinder substrates (diameter and height 9,14,20 mm) have been treated. The substrates were manufactured of stainless steel 12X18H10T and non-oxygen copper M00b. The substrates surface roughness after ion-plasma treatment has been investigated with electron microscope JEOL JSM-840 and optic interference non-contact profilograph- profilometer ''Micron-alpha''. According obtained results the surface of copper and stainless steel substrates has been treated to intensive modification, i.e. substrate surface after treatment significantly differs from initial one. During final ion-plasma treatment a number of effects occur: purification from surface oxides is accompanied with metallic surface ''contamination'' by the cathode material macrodroplets, surface micromelting accompanied by roughness increase, the surface layer annealing with noticeable decrease of hardness.

  20. Prediction of residual stress distributions due to surface machining and welding and crack growth simulation under residual stress distribution

    International Nuclear Information System (INIS)

    Ihara, Ryohei; Katsuyama, JInya; Onizawa, Kunio; Hashimoto, Tadafumi; Mikami, Yoshiki; Mochizuki, Masahito

    2011-01-01

    Research highlights: → Residual stress distributions due to welding and machining are evaluated by XRD and FEM. → Residual stress due to machining shows higher tensile stress than welding near the surface. → Crack growth analysis is performed using calculated residual stress. → Crack growth result is affected machining rather than welding. → Machining is an important factor for crack growth. - Abstract: In nuclear power plants, stress corrosion cracking (SCC) has been observed near the weld zone of the core shroud and primary loop recirculation (PLR) pipes made of low-carbon austenitic stainless steel Type 316L. The joining process of pipes usually includes surface machining and welding. Both processes induce residual stresses, and residual stresses are thus important factors in the occurrence and propagation of SCC. In this study, the finite element method (FEM) was used to estimate residual stress distributions generated by butt welding and surface machining. The thermoelastic-plastic analysis was performed for the welding simulation, and the thermo-mechanical coupled analysis based on the Johnson-Cook material model was performed for the surface machining simulation. In addition, a crack growth analysis based on the stress intensity factor (SIF) calculation was performed using the calculated residual stress distributions that are generated by welding and surface machining. The surface machining analysis showed that tensile residual stress due to surface machining only exists approximately 0.2 mm from the machined surface, and the surface residual stress increases with cutting speed. The crack growth analysis showed that the crack depth is affected by both surface machining and welding, and the crack length is more affected by surface machining than by welding.

  1. Enhanced charge recombination due to surfaces and twin defects in GaAs nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Evan; Sheng, Chunyang; Nakano, Aiichiro [Collaboratory for Advanced Computing and Simulations, Department of Physics and Astronomy, Department of Computer Science, Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089-0242 (United States); Shimamura, Kohei; Shimojo, Fuyuki [Collaboratory for Advanced Computing and Simulations, Department of Physics and Astronomy, Department of Computer Science, Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089-0242 (United States); Department of Physics, Kumamoto University, Kumamoto 860-8555 (Japan)

    2015-02-07

    Power conversion efficiency of gallium arsenide (GaAs) nanowire (NW) solar cells is severely limited by enhanced charge recombination (CR) at sidewall surfaces, but its atomistic mechanisms are not well understood. In addition, GaAs NWs usually contain a high density of twin defects that form a twin superlattice, but its effects on CR dynamics are largely unknown. Here, quantum molecular dynamics (QMD) simulations reveal the existence of an intrinsic type-II heterostructure at the (110) GaAs surface. Nonadiabatic quantum molecular dynamics (NAQMD) simulations show that the resulting staggered band alignment causes a photoexcited electron in the bulk to rapidly transfer to the surface. We have found orders-of-magnitude enhancement of the CR rate at the surface compared with the bulk value. Furthermore, QMD and NAQMD simulations show unique surface electronic states at alternating (111)A and (111)B sidewall surfaces of a twinned [111]-oriented GaAs NW, which act as effective CR centers. The calculated large surface recombination velocity quantitatively explains recent experimental observations and provides microscopic understanding of the underlying CR processes.

  2. Irreversible particle motion in surfactant-laden interfaces due to pressure-dependent surface viscosity

    Science.gov (United States)

    Manikantan, Harishankar; Squires, Todd M.

    2017-09-01

    The surface shear viscosity of an insoluble surfactant monolayer often depends strongly on its surface pressure. Here, we show that a particle moving within a bounded monolayer breaks the kinematic reversibility of low-Reynolds-number flows. The Lorentz reciprocal theorem allows such irreversibilities to be computed without solving the full nonlinear equations, giving the leading-order contribution of surface pressure-dependent surface viscosity. In particular, we show that a disc translating or rotating near an interfacial boundary experiences a force in the direction perpendicular to that boundary. In unbounded monolayers, coupled modes of motion can also lead to non-intuitive trajectories, which we illustrate using an interfacial analogue of the Magnus effect. This perturbative approach can be extended to more complex geometries, and to two-dimensional suspensions more generally.

  3. Numerical study on cavitating flow due to a hydrofoil near a free surface

    Directory of Open Access Journals (Sweden)

    Ping-Chen Wu

    2016-09-01

    Full Text Available A numerical strategy is proposed for a viscous uniform flow past a 2-D partially cavitating hydrofoil placed at a finite depth from the free surface. The flow was modeled by the Reynolds-averaged Navier–Stokes (RANS equations. A finite-volume method with the SIMPLE scheme and k-ε turbulence model were employed for computations. The “full cavitation model,” which included the effects of vaporization, noncondensible gases and compressibility, was incorporated in the computation of cavitating flow. The cavity shape and free surface were updated iteratively till a reasonable convergence was reached. As for the determination of the free surface, the VOF approach was adopted. The test cases show the accuracy and stability of our procedure to capture the cavitating flow near the free surface.

  4. Lattice distortion due to surface treatment of bias sputtering revealed by extremely asymmetric X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Y.; Akimoto, K.; Emoto, T.; Kikuchi, S.; Itagaki, K.; Namita, H

    2004-07-15

    Strain fields near InGaP or GaAs surfaces due to bias sputtering (Ar plasma-ion irradiation) for surface cleaning were measured by using a strain-sensitive X-ray diffraction technique. An extremely asymmetric InGaP or GaAs 1 1 3 reflection of the sample was measured to observe strain fields. We found that strain fields near InGaP or GaAs surfaces due to bias sputtering are affected by the bias voltage (Ar plasma-ion irradiation energy) used in this surface-cleaning treatment. By comparing measured 1 1 3 rocking curves and calculated ones based on the dynamical theory of X-rays, we estimated the thickness of a strained layer and a maximum strain at the surface. Resulting estimated parameters clearly show the bias sputtering to have two effects. One should be corresponding to the surface cleaning process of removing oxides on surfaces. The other is the lattice expansion, which is thought to be caused by compositional fluctuation near the surface or peening process of Ar ion.

  5. Amplification of Surface-Enhanced Raman Scattering Due to Substrate-Mediated Localized Surface Plasmons in Gold Nanodimers

    KAUST Repository

    Yue, Weisheng

    2017-03-28

    Surface-enhanced Raman scattering (SERS) is ubiquitous in chemical and biochemical sensing, imaging and identification. Maximizing SERS enhancement is a continuous effort focused on the design of appropriate SERS substrates. Here we show that significant improvement in a SERS signal can be achieved with substrates combining localized surface plasmon resonances and a nonresonant plasmonic substrate. By introducing a continuous gold (Au) film underneath Au nanodimers antenna arrays, an over 10-fold increase in SERS enhancement is demonstrated. Triangular, rectangle and disc dimers were studied, with bowtie antenna providing highest SERS enhancement. Simulations of electromagnetic field distributions of the Au nanodimers on the Au film support the observed enhancement dependences. The hybridization of localized plasmonic modes with the image modes in a metal film provides a straightforward way to improve SERS enhancement in designer SERS substrate.

  6. [Prevention of soil deterioration during cultivation of medicinal plants].

    Science.gov (United States)

    Guo, Lan-ping; Huang, Lu-qi; Jiang, You-xu; Lv, Dong-mei

    2006-05-01

    This paper summarized the aspects of the soil deterioration due to continuous growth of medicinal plants, such as nutrition insufficient, pH variation, harmful salt accumulating, harmful microbe and allelopathic substance increasing, soil physics and chemistry properties variation. And the ways to prevent and rehabilitate the deteriorated soil was indicated, which included anti-adversity species selecting, scientific management such as whorl cropping, nutrient elements supplement, usage of physical methods, nutrient liquid cultivating and VAM inoculating etc.

  7. Response on the earth surface due to illumination by electromagnetic pulse of nuclear explosion

    International Nuclear Information System (INIS)

    Nesic, R.

    1983-01-01

    Electromagnetic pulse is one of environment responses to extitation by nuclear explosion, its influence on the surface of the earth is most expressed in case of a nuclear explosion in ionosphere. For electromagnetic pulse of ionospheric explosion the time response, spectrum, spectral distribution and integral flux of energy on the earth surface were analysed, responses to them in shape of conductive voltage and currents were defined. Obtained shapes of responses and their range of variation are the base to define requirements for needed and justified protections. (author)

  8. Quantum critical fluctuations due to nested Fermi surface: The case of spinless fermions

    International Nuclear Information System (INIS)

    Schlottmann, P.

    2007-01-01

    A quantum critical point (QCP) can be obtained by tuning the critical temperature of a second-order phase transition to zero. A simple model of spinless fermions with nested Fermi surface leading to a charge density wave is considered. The QCP is obtained by tuning the nesting mismatch of the Fermi surface, which has the following consequences: (i) For the tuned QCP, the specific heat over T and the effective mass increase with the logarithm of the temperature as T is lowered. (ii) For the tuned QCP the linewidth of the quasi-particles is sublinear in T and ω. (iii) The specific heat and the linewidth display a crossover from non-Fermi liquid (∼T) to Fermi liquid (∼T 2 ) behavior with increasing nesting mismatch and decreasing temperature. (iv) For the tuned QCP, the dynamical charge susceptibility has a quasi-elastic peak with a linewidth proportional to T. (v) For non-critical Fermi vector mismatch the peak is inelastic. (vi) While the specific heat and the quasi-particle linewidth are only weakly dependent on the geometry of the nested Fermi surfaces, the momentum-dependent dynamical susceptibility is expected to be affected by the shape of the Fermi surface

  9. The design procedures on brick building against surface ground deformations due to mining and earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, J.; Yang, S. (China University of Mining and Technology (China))

    1992-05-01

    By analysing the effects of ground motion and deformation on surface buildings, and drawing on the experience of damages caused by the Tangshan and Chenhai earthquakes, the authors discuss the design of brick and concrete buildings which are protected against the damaging effects of both earthquakes and mining activities. 5 figs.

  10. Investigation of reasons for small changes in energy of UCN due to their interaction with surface

    CERN Document Server

    Lychagin, E V; Nekhaev, G V; Strelkov, A V; Kartashov, D G; Nesvizhevsky, V V

    2002-01-01

    The nature of the phenomenon of small changes in energy of ultracold neutrons (UCN) has been investigated. This phenomenon occurs during collisions of UCN with a surface, which increase the UCN energy by approx 10 sup - sup 7 eV with a probability of 10 sup - sup 8 -10 sup - sup 5 per collision. Such neutrons are named VUCN. It was observed that the preliminary warming up of samples at 500-600 K leads to an increase of the small heating probability P sub V sub U sub C sub N by at least a factor of 100 for a surface of stainless steel and by a factor of 10 for a copper surface. Extremely intensive UCN small heating by a diamond nanopowder has been observed for the first time. The spectrum of these VUCN and the temperature dependence of their heating probability P sub V sub U sub C sub N are similar to those measured earlier for stainless steel, beryllium, and copper. It is not observed small UCN heating, nor nanoparticles on a monocrystalline sapphire surface. That leads to the conclusion that VUCN are produce...

  11. Surface Wave Mode Conversion due to Lateral Heterogeneity and its Impact on Waveform Inversions

    Science.gov (United States)

    Datta, A.; Priestley, K. F.; Chapman, C. H.; Roecker, S. W.

    2016-12-01

    Surface wave tomography based on great circle ray theory has certain limitations which become increasingly significant with increasing frequency. One such limitation is the assumption of different surface wave modes propagating independently from source to receiver, valid only in case of smoothly varying media. In the real Earth, strong lateral gradients can cause significant interconversion among modes, thus potentially wreaking havoc with ray theory based tomographic inversions that make use of multimode information. The issue of mode coupling (with either normal modes or surface wave modes) for accurate modelling and inversion of body wave data has received significant attention in the seismological literature, but its impact on inversion of surface waveforms themselves remains much less understood.We present an empirical study with synthetic data, to investigate this problem with a two-fold approach. In the first part, 2D forward modelling using a new finite difference method that allows modelling a single mode at a time, is used to build a general picture of energy transfer among modes as a function of size, strength and sharpness of lateral heterogeneities. In the second part, we use the example of a multimode waveform inversion technique based on the Cara and Leveque (1987) approach of secondary observables, to invert our synthetic data and assess how mode conversion can affect the process of imaging the Earth. We pay special attention to ensuring that any biases or artefacts in the resulting inversions can be unambiguously attributed to mode conversion effects. This study helps pave the way towards the next generation of (non-numerical) surface wave tomography techniques geared to exploit higher frequencies and mode numbers than are typically used today.

  12. Electromagnetic fields due to a horizontal electric dipole antenna laid on the surface of a two-layer medium

    Science.gov (United States)

    Tsang, L.; Kong, J. A.

    1974-01-01

    With applications to geophysical subsurface probings, electromagnetic fields due to a horizontal electric dipole laid on the surface of a two-layer medium are solved by a combination of analytic and numerical methods. Interference patterns are calculated for various layer thickness. The results are interpreted in terms of normal modes, and the accuracies of the methods are discussed.

  13. Severe deterioration of psoriasis due to an insulinoma.

    LENUS (Irish Health Repository)

    Field, S

    2008-03-01

    We report a case of a 56-year-old woman who presented with a severe exacerbation of psoriasis with concurrent hypoglycaemic episodes. Methotrexate 17.5 mg weekly was required to control her psoriasis. Investigation of her hypoglycaemia showed raised levels of insulin, C-peptide and proinsulin. Radiological investigation showed a tumour at the tail of the pancreas and the diagnosis was insulinoma. A spleen-preserving distal pancreatectomy was performed and the hypoglycaemic symptoms resolved. Immediately following the pancreatectomy, methotrexate was stopped and the patient\\'s psoriasis went into remission. During a 2-year follow-up, she has required only minimal topical treatment for her skin.

  14. On the Changes in Lift of Hydrofoils Due to Surface Injections of Polymer Additives

    Science.gov (United States)

    1978-02-01

    no aIn thom ease of 0.l vox ’-trtd ing theo 110e- ativo I’votttro -paks . Also, thet~o eu dCt’tt.!o iva fe e on tlke t’oil’ .n e 00 I’蜳 ý .0k4 01...hydrofoil chord, c.. In -Equation 133 tho .posoitivo -ig applies to tho uipper surface ou, the hydrofoil Wh11i tho.1wk~ ativo pitgn applies to tho lower

  15. Reflectivity reduction of retro-reflector installed in LHD due to plasma surface interaction

    International Nuclear Information System (INIS)

    Yoshida, N.; Ohtawa, Y.; Ebihara, A.; Akiyama, T.; Tokitani, M.; Ashikawa, N.; Kawahata, K.

    2008-10-01

    Optical reflectivity of the retro-reflector installed in LHD as the first mirror was reduced seriously by plasma wall interaction. In order to understand the mechanism of the reflectivity reduction, optical and material properties of the mirror surfaces have been examined extensively. It was found that the deposited impurity layers caused the serious reduction of the reflectivity. Formation of iron oxide, bulges structure and He bubbles are the major factors for the reflectivity reduction in the wide wave length range. (author)

  16. Frequency shifts of resonant modes of the Sun due to near-surface convective scattering

    Science.gov (United States)

    Bhattacharya, J.; Hanasoge, S. M.; Antia, H. M.

    Measurements of oscillation frequencies of the Sun and stars can provide important independent constraints on their internal structure and dynamics. Seismic models of these oscillations are used to connect structure and rotation of the star to its resonant frequencies, which are then compared with observations, the goal being that of minimizing the difference between the two. Even in the case of the Sun, for which structure models are highly tuned, observed frequencies show systematic deviations from modeled frequencies, a phenomenon referred to as the ``surface term.'' The dominant source of this systematic effect is thought to be vigorous near-surface convection, which is not well accounted for in both stellar modeling and mode-oscillation physics. Here we bring to bear the method of homogenization, applicable in the asymptotic limit of large wavelengths (in comparison to the correlation scale of convection), to characterize the effect of small-scale surface convection on resonant-mode frequencies in the Sun. We show that the full oscillation equations, in the presence of temporally stationary 3D flows, can be reduced to an effective ``quiet-Sun'' wave equation with altered sound speed, Brünt-Väisäla frequency, and Lamb frequency. We derive the modified equation and relations for the appropriate averaging of 3D flows and thermal quantities to obtain the properties of this effective medium. Using flows obtained from 3D numerical simulations of near-surface convection, we quantify their effect on solar oscillation frequencies and find that they are shifted systematically and substantially. We argue therefore that consistent interpretations of resonant frequencies must include modifications to the wave equation that effectively capture the impact of vigorous hydrodynamic convection.

  17. FREQUENCY SHIFTS OF RESONANT MODES OF THE SUN DUE TO NEAR-SURFACE CONVECTIVE SCATTERING

    International Nuclear Information System (INIS)

    Bhattacharya, J.; Hanasoge, S.; Antia, H. M.

    2015-01-01

    Measurements of oscillation frequencies of the Sun and stars can provide important independent constraints on their internal structure and dynamics. Seismic models of these oscillations are used to connect structure and rotation of the star to its resonant frequencies, which are then compared with observations, the goal being that of minimizing the difference between the two. Even in the case of the Sun, for which structure models are highly tuned, observed frequencies show systematic deviations from modeled frequencies, a phenomenon referred to as the “surface term.” The dominant source of this systematic effect is thought to be vigorous near-surface convection, which is not well accounted for in both stellar modeling and mode-oscillation physics. Here we bring to bear the method of homogenization, applicable in the asymptotic limit of large wavelengths (in comparison to the correlation scale of convection), to characterize the effect of small-scale surface convection on resonant-mode frequencies in the Sun. We show that the full oscillation equations, in the presence of temporally stationary three-dimensional (3D) flows, can be reduced to an effective “quiet-Sun” wave equation with altered sound speed, Brünt–Väisäla frequency, and Lamb frequency. We derive the modified equation and relations for the appropriate averaging of 3D flows and thermal quantities to obtain the properties of this effective medium. Using flows obtained from 3D numerical simulations of near-surface convection, we quantify their effect on solar oscillation frequencies and find that they are shifted systematically and substantially. We argue therefore that consistent interpretations of resonant frequencies must include modifications to the wave equation that effectively capture the impact of vigorous hydrodynamic convection

  18. Rupture Dynamics along Thrust Dipping Fault: Inertia Effects due to Free Surface Wave Interactions

    Science.gov (United States)

    Vilotte, J. P.; Scala, A.; Festa, G.

    2017-12-01

    We numerically investigate the dynamic interaction between free surface and up-dip, in-plane rupture propagation along thrust faults, under linear slip-weakening friction. With reference to shallow along-dip rupture propagation during large subduction earthquakes, we consider here low dip-angle fault configurations with fixed strength excess and depth-increasing initial stress. In this configuration, the rupture undergoes a break of symmetry with slip-induced normal stress perturbations triggered by the interaction with reflected waves from the free surface. We found that both body-waves - behind the crack front - and surface waves - at the crack front - can trigger inertial effects. When waves interact with the rupture before this latter reaches its asymptotic speed, the rupture can accelerate toward the asymptotic speed faster than in the unbounded symmetric case, as a result of these inertial effects. Moreover, wave interaction at the crack front also affects the slip rate generating large ground motion on the hanging wall. Imposing the same initial normal stress, frictional strength and stress drop while varying the static friction coefficient we found that the break of symmetry makes the rupture dynamics dependent on the absolute value of friction. The higher the friction the stronger the inertial effect both in terms of rupture acceleration and slip amount. When the contact condition allows the fault interface to open close to the free surface, the length of the opening zone is shown to depend on the propagation length, the initial normal stress and the static friction coefficient. These new results are shown to agree with analytical results of rupture propagation in bounded media, and open new perspectives for understanding the shallow rupture of large subduction earthquakes and tsunami sources.

  19. Radiant heat evaluation of concrete: a study of the erosion of concrete due to surface heating

    Energy Technology Data Exchange (ETDEWEB)

    Chu, T.Y.

    1978-01-01

    Experiments were carried out to investigate the erosion of concrete under high surface heat flux in connection with the core-melt/concrete interaction studies. The dominate erosion mechanism was found to be melting at the surface accompanied by chemical decomposition of the concrete beneath the melt-solid interface. The erosion process reaches a steady state after an initial transient. The steady state is characterized by an essentially constant erosion rate at the surface and a nonvarying (with respect to the moving melt interface) temperature distribution within the concrete. For the range of incident heat flux 64 W/cm/sup 2/ to 118 W/cm/sup 2/, the corresponding steady state erosion rate varies from approximately 8 cm/hr to 23 cm/hr. A simple ablation/melting model is proposed for the erosion process. The model was found to be able to correlate all temperature responses at various depths from all tests at large times and for temperatures above approximately 250/sup 0/C.

  20. Size effects on electromechanical coupling fields of a bending piezoelectric nanoplate due to surface effects and flexoelectricity

    Science.gov (United States)

    Zhang, Zhengrong; Jiang, Liying

    2014-10-01

    Due to large surface to volume ratio and manifest strain gradients typically present in nanostructures, it is essential to incorporate both surface effects and flexoelectricity in studying the size-dependent electromechanical coupling behaviors of piezoelectric materials at the nano-scale. In the current work, a modified Kirchhoff plate model with the consideration of residual surface stress, surface elasticity, surface piezoelectricity, and flexoelectricity is developed to investigate the electroelastic responses and vibrational behaviors of a bending piezoelectric nanoplate (PNP). The governing equations and the corresponding boundary conditions accounting for both the surface effects and the flexoelectricity are derived by the variational principle. Ritz approximate solutions of the static bending and the free vibration indicate that these nano-scale features are more prominent for thinner plates with smaller thickness. The simulation results also reveal that the influence of the flexoelectricity and the surface effects upon the bending behaviors of the PNP depends on the applied electrical loading and the plate dimensions. Moreover, it is also observed that the frequency tuning of PNP-based nanoresonators by adjusting applied electrical load can be modified by both the flexoelectricity and the surface effects. The current work is expected to provide increased understanding on the theoretical basis for the design and applications of PNP-based nanodevices.

  1. A probability evaluation method of early deterioration condition for the critical components of wind turbine generator systems

    DEFF Research Database (Denmark)

    Hu, Y.; Li, H.; Liao, X

    2016-01-01

    This study determines the early deterioration condition of critical components for a wind turbine generator system (WTGS). Due to the uncertainty nature of the fluctuation and intermittence of wind, early deterioration condition evaluation poses a challenge to the traditional vibration...... method of early deterioration condition for critical components based only on temperature characteristic parameters. First, the dynamic threshold of deterioration degree function was proposed by analyzing the operational data between temperature and rotor speed. Second, a probability evaluation method...... of early deterioration condition was presented. Finally, two cases showed the validity of the proposed probability evaluation method in detecting early deterioration condition and in tracking their further deterioration for the critical components....

  2. Numerical study for Darcy-Forchheimer flow of nanofluid due to an exponentially stretching curved surface

    Science.gov (United States)

    Hayat, Tasawar; Haider, Farwa; Muhammad, Taseer; Alsaedi, Ahmed

    2018-03-01

    Here Darcy-Forchheimer flow of viscous nanofluid with Brownian motion and thermophoresis is addressed. An incompressible viscous liquid saturates the porous space through Darcy-Forchheimer relation. Flow is generated by an exponentially stretching curved surface. System of partial differential equations is converted into ordinary differential system. Nonlinear systems are solved numerically by NDSolve technique. Graphs are plotted for the outcomes of various pertinent variables. Skin friction coefficient and local Nusselt and Sherwood numbers have been physically interpreted. Our results indicate that the local Nusselt and Sherwood numbers are reduced for larger values of local porosity parameter and Forchheimer number.

  3. Wake fields effects due to surface roughness in a circular pipe

    CERN Document Server

    Angelici, M; Mostacci, A; Palumbo, L

    2001-01-01

    The problem of the wake field generated by a relativistic particle travelling in a long beam pipe with rough surface has been studied by means of a standard theory based on the hybrid modes excited in a periodically corrugated waveguide with circular cross-section. Slow waves synchronous with the particle can be excited in the structure, producing wake fields whose frequency and amplitude depend on the depth of the corrugation. An analytical expression of the wake field is given for very small corrugations.

  4. Estimation of contamination on plant surfaces due to deposition of radionuclides from the atmosphere

    International Nuclear Information System (INIS)

    Simmonds, J.R.

    1983-01-01

    Calculations of Normalized Specific Activity (NSA), the ratio of concentration of a contaminant per unit of vegetation to its daily rate of deposition onto the ground, have been used as a basis for determining interception factors and retention half-lives for radioactivity deposited on grain and leafy vegetables. The resulting interception factors and retention half-lives are for use in assessing contamination levels on crops at harvest during conditions of continuous deposition. The results of the study indicate that the behaviour of strontium and caesium on plant surfaces is fairly similar but that plutonium behaves in a notably different way. (author)

  5. Large apparent electric size of solid-state nanopores due to spatially extended surface conduction.

    Science.gov (United States)

    Lee, Choongyeop; Joly, Laurent; Siria, Alessandro; Biance, Anne-Laure; Fulcrand, Rémy; Bocquet, Lydéric

    2012-08-08

    Ion transport through nanopores drilled in thin membranes is central to numerous applications, including biosensing and ion selective membranes. This paper reports experiments, numerical calculations, and theoretical predictions demonstrating an unexpectedly large ionic conduction in solid-state nanopores, taking its origin in anomalous entrance effects. In contrast to naive expectations based on analogies with electric circuits, the surface conductance inside the nanopore is shown to perturb the three-dimensional electric current streamlines far outside the nanopore in order to meet charge conservation at the pore entrance. This unexpected contribution to the ionic conductance can be interpreted in terms of an apparent electric size of the solid-state nanopore, which is much larger than its geometric counterpart whenever the number of charges carried by the nanopore surface exceeds its bulk counterpart. This apparent electric size, which can reach hundreds of nanometers, can have a major impact on the electrical detection of translocation events through nanopores, as well as for ionic transport in biological nanopores.

  6. Hydromechanical Simulations of Surface Uplift due to CO2 Injection at In Salah (Invited)

    Science.gov (United States)

    Morris, J. P.; Hao, Y.; Foxall, W.; McNab, W. W.

    2009-12-01

    We present recent simulations of the hydromechanical response of the reservoir and overburden associated with CO2 injection at In Salah. Using the best available field data for the reservoir and fault network properties, we are able to demonstrate excellent agreement between simulation and observation. These results are providing new insight into the fate of the CO2 about one of the injectors where intriguing morphology was observed in surface uplift. Additionally, this work is helping to better establish the advantages and limitations of interpreting surface displacements to guide our understanding of fluid fate. The In Salah Project (a joint venture of BP, StatoilHydro and Sonatrach) includes a CO2 sequestration effort that has successfully injected millions of tons of CO2 into a deep saline formation close to a producing gas field in Algeria. We have been funded by the Joint Industry Project (A consortium consisting of BP, StatoilHydro and Sonatrach, hereafter the JIP) and the U.S. Department of Energy to investigate the role of injection induced mechanical deformation and geochemical alteration at the In Salah CO2 storage project. Here we focus upon the hydromechanical portion of the study. We have performed detailed simulations of the hydromechanical response in the vicinity of the KB-502 CO2 injector specifically because the morphology of the observed surface deformation differed from that above the other injectors at the field. First we performed a geomechanical analysis to predict which faults are flow conduits and which are flow barriers. NUFT simulations were performed based upon this information using permeability fields for the reservoir provided by the JIP. These results indicate that the presence of faults in the vicinity of the KB-502 injector may be responsible for the early breakthrough of CO2 observed at a nearby well, KB-5. We have simulated the mm-scale uplift of the overburden and compared the results with observed deformation using InSAR data

  7. Procedure to approximately estimate the uncertainty of material ratio parameters due to inhomogeneity of surface roughness

    International Nuclear Information System (INIS)

    Hüser, Dorothee; Thomsen-Schmidt, Peter; Hüser, Jonathan; Rief, Sebastian; Seewig, Jörg

    2016-01-01

    Roughness parameters that characterize contacting surfaces with regard to friction and wear are commonly stated without uncertainties, or with an uncertainty only taking into account a very limited amount of aspects such as repeatability of reproducibility (homogeneity) of the specimen. This makes it difficult to discriminate between different values of single roughness parameters. Therefore uncertainty assessment methods are required that take all relevant aspects into account. In the literature this is rarely performed and examples specific for parameters used in friction and wear are not yet given. We propose a procedure to derive the uncertainty from a single profile employing a statistical method that is based on the statistical moments of the amplitude distribution and the autocorrelation length of the profile. To show the possibilities and the limitations of this method we compare the uncertainty derived from a single profile with that derived from a high statistics experiment. (paper)

  8. Failure of man-made cavities in salt and surface subsidence due to sulfur mining

    Energy Technology Data Exchange (ETDEWEB)

    Coates, G.K.; Lee, C.A.; McClain, W.C.; Senseny, P.E.

    1981-01-01

    An engineering data base relevant to subsidence due to sulfur mining and to structural failure of cavities in salt is established, evaluated and documented. Nineteen failure events are discussed. Based on these documented failure events, capabilities of and inputs to a mathematical model of cavity failure are determined. Two failure events are adequately documented for use in model verification studies. A conclusion of this study that is pertinent to the Strategic Petroleum Reserve is that cavity failures in dome salt are fairly rare, but that as the number of large cavities (especially those having large roof spans) increases, failures will probably be more common unless stability and failure mechanisms of cavities are better understood.

  9. Metabolism of tritium uptake due to handling of metal surfaces exposed to tritiated hydrogen gas

    International Nuclear Information System (INIS)

    Johnson, J.R.; Peterman, B.F.

    1987-08-01

    Hairless rats were exposed to tritium by rubbing HT contaminated stainless steel planchets on them. The pattern of tritium excretion in the urine (n=4), shows the OBT (organically bound tritium) retention curve to be approximated by the sum of 2 exponential curves, one with a half-life of 0.4 days and another with a half-life of 1.4 days. The retention of HTO fit a single exponential curve with a half-life of 3.1 days. Exposed skin, unexposed skin, liver, muscle and blood (n=6) were assayed for HBO, and free HTO. Highest activity was found in the exposed skin, other organs with high activity are the unexposed skin and liver. Examination of the exposed skin showed HTO to be concentrated in the uppermost layers. The distribution of OBT was similar but was incorporated at a faster rate. The basal layer is exposed to a tritium concentration between 70-90% of that of the surface. The two macromolecule fractions with the highest amount of radioactivity were lipid and insoluble protein (mainly collagen)

  10. Modeling viscoelastic deformation of the earth due to surface loading by commercial finite element package - ABAQUS

    Science.gov (United States)

    Kit Wong, Ching; Wu, Patrick

    2017-04-01

    Wu (2004) developed a transformation scheme to model viscoelatic deformation due to glacial loading by commercial finite element package - ABAQUS. Benchmark tests confirmed that this method works extremely well on incompressible earth model. Bangtsson & Lund (2008),however, showed that the transformation scheme would lead to incorrect results if compressible material parameters are used. Their study implies that Wu's method of stress transformation is inadequate to model the load induced deformation of a compressible earth under the framework of ABAQUS. In light of this, numerical experiments are carried out to find if there exist other methods that serve this purpose. All the tested methods are not satisfying as the results failed to converge through iterations, except at the elastic limit. Those tested methods will be outlined and the results will be presented. Possible reasons of failure will also be discussed. Bängtsson, E., & Lund, B. (2008). A comparison between two solution techniques to solve the equations of glacially induced deformation of an elastic Earth. International journal for numerical methods in engineering, 75(4), 479-502. Wu, P. (2004). Using commercial finite element packages for the study of earth deformations, sea levels and the state of stress. Geophysical Journal International, 158(2), 401-408.

  11. Numerical study for nanofluid flow due to a nonlinear curved stretching surface with convective heat and mass conditions

    Directory of Open Access Journals (Sweden)

    Tasawar Hayat

    Full Text Available This article presents the simultaneous effects of convective heat and mass conditions in boundary-layer flow of nanoliquid due to a nonlinear curved stretching surface. A nonlinear curved stretching surface is used to generate the flow. Thermophoretic diffusion and random motion features are also incorporated. Convective heat and mass conditions are imposed at boundary. Suitable variables are utilized to convert the nonlinear partial differential system into nonlinear ordinary differential system. The obtained nonlinear systems are solved numerically through shooting technique. Plots are displayed in order to explore the role of physical flow variables on the solutions. The skin-friction coefficient and local Nusselt and Sherwood numbers are computed and examined. Our findings indicate that the local Nusselt and Sherwood numbers are reduced for larger values of thermophoresis parameter. Keywords: Nonlinear curved stretching surface, Nanoparticles, Convective heat and mass conditions, Numerical solution

  12. Radio Tomography of Ionospheric Structures (probably) due to Underground-Surface-Atmosphere-Ionosphere Coupling

    Science.gov (United States)

    Kunitsyn, V.; Nesterov, I.; Andreeva, E.; Rekenthaler, D. A.

    2012-12-01

    Ionospheric radio-tomography (RT) utilizes radio signals transmitted from the global navigational satellite systems (GNSS), including low-orbiting (LO) navigational systems such as Transit, Tsikada, etc., and high-orbiting (HO) navigational systems such as GPS, GLONASS, Galileo, Beidou, etc. The signals that are transmitted from the LO navigational satellites and recorded by ground receiving chains can be inverted for almost instantaneous (5-8 min) 2D snapshots of electron density. The data from the networks of ground receivers that record the signals of the HO satellites are suitable for implementing high-orbital RT (HORT), i.e. reconstructing the 4D distributions of the ionospheric electron density (one 3D image every 20-30 min). In the regions densely covered by the GNSS receivers, it is currently possible to get a time step of 2-4 min. The LORT and HORT approaches have a common methodical basis: in both these techniques, the integrals of electron density along the ray between the satellite and the receiver are measured, and then the tomographic procedures are applied to reconstruct the distributions of electron density. We present several examples of the experiments on the ionospheric RT, which are related to the Underground-Surface-Atmosphere-Ionosphere (USAI) coupling. In particular, we demonstrate examples of RT images of the ionosphere after industrial explosions, rocket launches, and modification of the ionosphere by high-power radio waves. We also show RT cross sections reflecting ionospheric disturbances caused by the earthquakes (EQ) and tsunami waves. In these cases, there is an evident cause-and-effect relationship. The perturbations are transferred between the geospheres predominantly by acoustic gravity waves (AGW), whose amplitudes increase with increasing height. As far as EQ are concerned, the cause of the USAI coupling mechanism is not obvious. It is clear, however, that the regular RT studies can promote the solution of this challenging problem

  13. 40 CFR 1033.245 - Deterioration factors.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Deterioration factors. 1033.245... CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Certifying Engine Families § 1033.245 Deterioration factors. Establish deterioration factors for each pollutant to determine, as described in § 1033.240, whether your...

  14. 40 CFR 1042.245 - Deterioration factors.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Deterioration factors. 1042.245... Certifying Engine Families § 1042.245 Deterioration factors. This section describes how to determine deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre...

  15. Maintenance planning for a deteriorating production process

    International Nuclear Information System (INIS)

    Ahmadi, Reza; Fouladirad, Mitra

    2017-01-01

    We consider a system subject to degradation, more precisely a production process with three quality states evolving according to a homogeneous Markov process. The degradation decreases the income generated by the system. To maintain revenue stream and prevent the loss of revenue, the system is inspected according to a Markov-modulated Poisson process. It is assumed that each inspection at time t incurs a time dependent cost. Each inspection improves the system health and therefore the degradation level jumps to a less deteriorated state. In absence of inspections, the system state is prone to shift to a more deteriorated state with a constant rate. The problem is to determine an optimal operating (stopping) time which truly balances some flow of income and increasing costs due to inspections, and so maximizes the expected gain of the proposed policy. To demonstrate the applicability of the explored approach and its effectiveness, some numerical results are provided. - Highlights: • An integrated model based on a quality state-dependent reward structure is explored. • The model allows the revenue stream responds to variation in the quality state. • The production process is inspected according to a Markovmodulated Poisson process. • Assuming a Markovian structure, we predict the quality state behavior. • We determine an optimal production run length based on a stopping decision rule.

  16. Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger

    Science.gov (United States)

    Hosseinian, A.; Meghdadi Isfahani, A. H.

    2017-11-01

    In this study, the heat transfer enhancement due to the surface vibration for a double pipe heat exchanger, made of PVDF, is investigated. In order to create forced vibrations (3-9 m/s2, 100 Hz) on the outer surface of the heat exchanger electro-dynamic vibrators are used. Experiments were performed at inner Reynolds numbers ranging from 2533 to 9960. The effects of volume flow rate and temperature on heat transfer performance are evaluated. Results demonstrated that heat transfer coefficient increases by increasing vibration level and mass flow rate. The most increase in heat transfer coefficient is 97% which is obtained for the highest vibration level (9 m/s2) in the experiment range.

  17. Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger

    Science.gov (United States)

    Hosseinian, A.; Meghdadi Isfahani, A. H.

    2018-04-01

    In this study, the heat transfer enhancement due to the surface vibration for a double pipe heat exchanger, made of PVDF, is investigated. In order to create forced vibrations (3-9 m/s2, 100 Hz) on the outer surface of the heat exchanger electro-dynamic vibrators are used. Experiments were performed at inner Reynolds numbers ranging from 2533 to 9960. The effects of volume flow rate and temperature on heat transfer performance are evaluated. Results demonstrated that heat transfer coefficient increases by increasing vibration level and mass flow rate. The most increase in heat transfer coefficient is 97% which is obtained for the highest vibration level (9 m/s2) in the experiment range.

  18. Reducing post-harvest physiological deterioration in cassava ...

    African Journals Online (AJOL)

    Cassava roots are notable for their short shelf-life due to post-harvest physiological deterioration (PPD). PPD is initiated by mechanical damage, which typically occurs during harvesting and progresses from the proximal site of damage to the distal end, making the roots unpalatable within 72h. The short shelf-life severely ...

  19. Engineering aspects and time effects of rapid deterioration of sandstone in the tropical environment of Sabah, Malaysia

    NARCIS (Netherlands)

    Tating, F.F.; Hack, H.R.G.K.; Jetten, V.G.

    2013-01-01

    Cut slopes in rock masses start to deteriorate directly after excavation due to stress relief and weathering. The deterioration is a time dependent process that depends on the local climate and the rock mass including its history, and the environment. The amount of deterioration per time unit (‘the

  20. Electrochemical Surface Potential due to Classical Point Charge Models Drives Anion Adsorption to the Air-Water Interface

    Energy Technology Data Exchange (ETDEWEB)

    Baer, Marcel D.; Stern, Abraham C.; Levin, Yan; Tobias, Douglas J.; Mundy, Christopher J.

    2012-06-07

    Herein, we present research that suggests that the underlying physics that drive simple empirical models of anions (e.g. point charge, no polarization) to the air-water interface, with water described by SPC/E, or related partial charge models is different than when both ions and water are modeled with quantum mechanical based interactions. Specifically, we will show that the driving force of ions to the air-water interface for point charge models results from both cavitation and the negative electrochemical surface potential. We will demonstrate that we can fully characterize the role of the free energy due to the electrochemical surface potential computed from simple empirical models and its role in ionic adsorption within the context of dielectric continuum theory (DCT). Our research suggests that a significant part of the electrochemical surface potential in empirical models appears to be an artifact of the failure of point charge models in the vicinity of a broken symmetry. This work was supported by the U.S. Department of Energy‘s (DOE) Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated for the Department of Energy by Battelle.

  1. Alteration of the Carbon and Nitrogen Isotopic Composition in the Martian Surface Rocks Due to Cosmic Ray Exposure

    Science.gov (United States)

    Pavlov, A. A.; Pavlov, A. K.; Ostryakov, V. M.; Vasilyev, G. I.; Mahaffy, P.; Steele, A.

    2014-01-01

    C-13/C-12 and N-15/N-14 isotopic ratios are pivotal for our understanding of the Martian carbon cycle, history of the Martian atmospheric escape, and origin of the organic compounds on Mars. Here we demonstrate that the carbon and nitrogen isotopic composition of the surface rocks on Mars can be significantly altered by the continuous exposure of Martian surface to cosmic rays. Cosmic rays can effectively produce C-13 and N-15 isotopes via spallation nuclear reactions on oxygen atoms in various Martian rocks. We calculate that in the top meter of the Martian rocks, the rates of production of both C-13 and N-15 due to galactic cosmic rays (GCRs) exposure can vary within 1.5-6 atoms/cm3/s depending on rocks' depth and chemical composition. We also find that the average solar cosmic rays can produce carbon and nitrogen isotopes at a rate comparable to GCRs in the top 5-10 cm of the Martian rocks. We demonstrate that if the total carbon content in a surface Martian rock is rocks with relatively short exposure ages (e.g., 100 million years), cosmogenic changes in N-15/N-14 ratio are still very significant. We also show that a short exposure to cosmic rays of Allan Hills 84001 while on Mars can explain its high-temperature heavy nitrogen isotopic composition (N-15/N-14). Applications to Martian meteorites and the current Mars Science Laboratory mission are discussed.

  2. Development of Enhanced Pavement Deterioration Curves

    OpenAIRE

    Ercisli, Safak

    2015-01-01

    Modeling pavement deterioration and predicting the pavement performance is crucial for optimum pavement network management. Currently only a few models exist that incorporate the structural capacity of the pavements into deterioration modeling. This thesis develops pavement deterioration models that take into account, along with the age of the pavement, the pavement structural condition expressed in terms of the Modified Structural Index (MSI). The research found MSI to be a significant input...

  3. MHD Convective Flow of Jeffrey Fluid Due to a Curved Stretching Surface with Homogeneous-Heterogeneous Reactions.

    Directory of Open Access Journals (Sweden)

    Maria Imtiaz

    Full Text Available This paper looks at the flow of Jeffrey fluid due to a curved stretching sheet. Effect of homogeneous-heterogeneous reactions is considered. An electrically conducting fluid in the presence of applied magnetic field is considered. Convective boundary conditions model the heat transfer analysis. Transformation method reduces the governing nonlinear partial differential equations into the ordinary differential equations. Convergence of the obtained series solutions is explicitly discussed. Characteristics of sundry parameters on the velocity, temperature and concentration profiles are analyzed by plotting graphs. Computations for pressure, skin friction coefficient and surface heat transfer rate are presented and examined. It is noted that fluid velocity and temperature through curvature parameter are enhanced. Increasing values of Biot number correspond to the enhancement in temperature and Nusselt number.

  4. Spectral Dependent Degradation of the Solar Diffuser on Suomi-NPP VIIRS Due to Surface Roughness-Induced Rayleigh Scattering

    Directory of Open Access Journals (Sweden)

    Xi Shao

    2016-03-01

    Full Text Available The Visible Infrared Imaging Radiometer Suite (VIIRS onboard Suomi National Polar Orbiting Partnership (SNPP uses a solar diffuser (SD as its radiometric calibrator for the reflective solar band calibration. The SD is made of Spectralon™ (one type of fluoropolymer and was chosen because of its controlled reflectance in the Visible/Near-Infrared/Shortwave-Infrared region and its near-Lambertian reflectance property. On-orbit changes in VIIRS SD reflectance as monitored by the Solar Diffuser Stability Monitor showed faster degradation of SD reflectance for 0.4 to 0.6 µm channels than the longer wavelength channels. Analysis of VIIRS SD reflectance data show that the spectral dependent degradation of SD reflectance in short wavelength can be explained with a SD Surface Roughness (length scale << wavelength based Rayleigh Scattering (SRRS model due to exposure to solar UV radiation and energetic particles. The characteristic length parameter of the SD surface roughness is derived from the long term reflectance data of the VIIRS SD and it changes at approximately the tens of nanometers level over the operational period of VIIRS. This estimated roughness length scale is consistent with the experimental result from radiation exposure of a fluoropolymer sample and validates the applicability of the Rayleigh scattering-based model. The model is also applicable to explaining the spectral dependent degradation of the SDs on other satellites. This novel approach allows us to better understand the physical processes of the SD degradation, and is complementary to previous mathematics based models.

  5. Film Thickness Formation in Nanoscale due to Effects of Elastohydrodynamic, Electrostatic and Surface force of Solvation and Van der Waals

    Directory of Open Access Journals (Sweden)

    M.F. Abd Al-Samieh

    2017-03-01

    Full Text Available The mechanism of oil film with a thickness in the nanoscale is discussed in this paper. A polar lubricant of propylene carbonate is used as the intervening liquid between contiguous bodies in concentrated contacts. A pressure caused by the hydrodynamic viscous action in addition to double layer electrostatic force, Van der Waals inter-molecular forces, and solvation pressure due to inter-surface forces is considered in calculating the ultrathin lubricating films. The numerical solution has been carried out, using the Newton-Raphson iteration technique, applied for the convergence of the hydrodynamic pressure. The results show that, at separations beyond about five molecular diameters of the intervening liquid, the formation of a lubricant film thickness is governed by combined effects of viscous action and surface force of an attractive Van der Waals force and a repulsive double layer force. At smaller separations below about five molecular diameters of the intervening liquid, the effect of solvation force is dominant in determining the oil film thickness

  6. MODELING THE ANOMALY OF SURFACE NUMBER DENSITIES OF GALAXIES ON THE GALACTIC EXTINCTION MAP DUE TO THEIR FIR EMISSION CONTAMINATION

    Energy Technology Data Exchange (ETDEWEB)

    Kashiwagi, Toshiya; Suto, Yasushi; Taruya, Atsushi; Yahata, Kazuhiro [Department of Physics, The University of Tokyo, Tokyo 113-0033 (Japan); Kayo, Issha [Department of Physics, Toho University, Funabashi, Chiba 274-8510 (Japan); Nishimichi, Takahiro, E-mail: kashiwagi@utap.phys.s.u-tokyo.ac.jp [Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa, Chiba 277-8568 (Japan)

    2015-02-01

    The most widely used Galactic extinction map is constructed assuming that the observed far-infrared (FIR) fluxes come entirely from Galactic dust. According to the earlier suggestion by Yahata et al., we consider how FIR emission of galaxies affects the SFD map. We first compute the surface number density of Sloan Digital Sky Survey (SDSS) DR7 galaxies as a function of the r-band extinction, A {sub r,} {sub SFD}. We confirm that the surface densities of those galaxies positively correlate with A {sub r,} {sub SFD} for A {sub r,} {sub SFD} < 0.1, as first discovered by Yahata et al. for SDSS DR4 galaxies. Next we construct an analytical model to compute the surface density of galaxies, taking into account the contamination of their FIR emission. We adopt a log-normal probability distribution for the ratio of 100 μm and r-band luminosities of each galaxy, y ≡ (νL){sub 100} {sub μm}/(νL) {sub r}. Then we search for the mean and rms values of y that fit the observed anomaly, using the analytical model. The required values to reproduce the anomaly are roughly consistent with those measured from the stacking analysis of SDSS galaxies. Due to the limitation of our statistical modeling, we are not yet able to remove the FIR contamination of galaxies from the extinction map. Nevertheless, the agreement with the model prediction suggests that the FIR emission of galaxies is mainly responsible for the observed anomaly. Whereas the corresponding systematic error in the Galactic extinction map is 0.1-1 mmag, it is directly correlated with galaxy clustering and thus needs to be carefully examined in precision cosmology.

  7. Differential loggerhead by-catch and direct mortality due to surface longlines according to boat strata and gear type

    Directory of Open Access Journals (Sweden)

    Juan A. Camiñas

    2006-12-01

    Full Text Available Surface longline gears are used to fish different species, mainly albacore Thunnus alalunga (Bonnaterre, 1788, bluefin tuna Thunnus thynnus (Linnaeus, 1758, and swordfish Xiphias gladius Linnaeus, 1758, and are considered highly dangerous for threatened marine turtles. Loggerheads Caretta caretta (Linnaeus, 1758 can be incidentally captured by surface longlines. A number of captured individuals die during the fishing operation, which we consider direct mortality due to fishing. We analysed the relative loggerhead by-catch and direct mortality associated with each type of boat and gear from April to December during the period 1999-2004 in the Spanish surface longline fleet that fishes in the western Mediterranean Sea, an important fishing area for this fleet. We used different indices to compute the catch per unit effort (CPUE according to the number of hooks and to the number of fishing operations for each type of boat and gear. Both by-catch and direct mortality differed significantly according to the type of boat and gear. With respect to the number of hooks, boats longer than 12 m not using a roller and targeting bluefin tuna captured the highest number of loggerheads, whereas boats longer than 12 m with a roller that targeted swordfish caused the highest direct mortality. With respect to the number of fishing operations, boats longer than 12 m without a roller that targeted albacore captured the highest number of loggerheads; the highest direct mortality was caused by this type of boat and by boats longer than 12 m using a roller and targeting swordfish.

  8. Alteration of the Carbon and Nitrogen Isotopic Composition in the Martian Surface Rocks Due to Cosmic Ray Exposure

    Science.gov (United States)

    Pavlov, A. A.; Pavlov, A. K.; Ostryakov, V. M.; Vasilyev, G. I.; Mahaffy, P.; Steele, A.

    2014-01-01

    C-13/C-12 and N-15/N-14 isotopic ratios are pivotal for our understanding of the Martian carbon cycle, history of the Martian atmospheric escape, and origin of the organic compounds on Mars. Here we demonstrate that the carbon and nitrogen isotopic composition of the surface rocks on Mars can be significantly altered by the continuous exposure of Martian surface to cosmic rays. Cosmic rays can effectively produce C-13 and N-15 isotopes via spallation nuclear reactions on oxygen atoms in various Martian rocks. We calculate that in the top meter of the Martian rocks, the rates of production of both C-13 and N-15 due to galactic cosmic rays (GCRs) exposure can vary within 1.5-6 atoms/cm3/s depending on rocks' depth and chemical composition. We also find that the average solar cosmic rays can produce carbon and nitrogen isotopes at a rate comparable to GCRs in the top 5-10 cm of the Martian rocks. We demonstrate that if the total carbon content in a surface Martian rock is <10 ppm, then the "light," potentially "biological" C-13/C-12 ratio would be effectively erased by cosmic rays over 3.5 billion years of exposure. We found that for the rocks with relatively short exposure ages (e.g., 100 million years), cosmogenic changes in N-15/N-14 ratio are still very significant. We also show that a short exposure to cosmic rays of Allan Hills 84001 while on Mars can explain its high-temperature heavy nitrogen isotopic composition (N-15/N-14). Applications to Martian meteorites and the current Mars Science Laboratory mission are discussed.

  9. Multi-Physics and Multi-Scale Deterioration Modelling of Reinforced Concrete

    DEFF Research Database (Denmark)

    Michel, Alexander; Stang, Henrik; Lepech, M.

    2016-01-01

    Deterioration of reinforced concrete infrastructure such as bridges, tunnels, and buildings represents one of the major challenges currently facing developed countries. While engineering tools and methods for structural modelling and design of new reinforced concrete infrastructure are mature......, methods and tools for modelling decades-long deterioration and maintenance are much less developed. In this paper, a multi-physics and multi-scale modelling approach for structural deterioration of reinforced concrete components due to reinforcement corrosion is presented. The multi-disciplinary modelling...... approach includes physical, chemical, electrochemical, and fracture mechanical processes at the material and meso-scale, which are further coupled with mechanical deterioration processes at the structural scale....

  10. Deterioration pattern of six biodegradable, potentially low-environmental impact mulches in field conditions.

    Science.gov (United States)

    Moreno, Marta M; González-Mora, Sara; Villena, Jaime; Campos, Juan A; Moreno, Carmen

    2017-09-15

    Polyethylene plastic mulches are widely used in agriculture due to the countless advantages they have. However, the environmental problems associated with their use have led us to look for alternative mulch materials which degrade naturally and quickly, impact the environment less and function satisfactorily. To this end, biodegradable plastics and paper mulches are being used, but aspects related to their degradation should be studied more in-depth. This work provides the deterioration pattern of six biodegradable mulch materials (i.e. vegetable starch, polylactic acid plastic films or paper mulches) in horticultural crop in the edaphoclimatic conditions of Central Spain in two situations: over the lifetime of the mulches and after being incorporated into the soil. In the first situation, the deterioration levels were evaluated by recording the puncture resistance, weight and area covered in the above-soil and the in-soil part, and after soil incorporation by the number of fragments, their surfaces and weight. In the above-soil part, biodegradable plastics experienced further deterioration, particularly with no crop, while the paper mulch remained practically intact. However, the in-soil paper experienced complete and rapid degradation. At 200 days after soil incorporation, mulch residues were scarce, with the environmental effects it entails. These findings offer practical implications regarding the type of crop. The measurement of the surface covered, rather than the weight, was shown to be a more reliable indicator of the degradation of mulches. Furthermore, visual estimation was found to underestimate the functionality of mulches in comparison to that of the measurement of the surface covered. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Macroscopical morphology of deterioration of the stone used in the cathedral whole of Granada/Spain

    OpenAIRE

    Alcalde, M.; Martin, L.; Bello, M. A.; Martin, A.

    1992-01-01

    The main factors of deterioration that affect the Cathedral Whole of Granada are one of natural thermic origin due to the low temperatures during the winters and the higher thermic oscillations and those of anthropogenical origin: fundamentally the oxidation of metallic elements and atmospheric pollution due to burnt products. For this reason, the more important deterioration mechanisms are the freezing ones due to the expansion produced in the water retained inside the pores and microcracks,...

  12. Macroscopical morphology of deterioration of the stone used in the cathedral whole of Granada (Spain)

    OpenAIRE

    Alcalde Moreno, Manuel; Bello López, Miguel Ángel; Martín García, Lourdes; Martín Pérez, Antonio

    1992-01-01

    The main factors of deterioration that affect the Cathedral Whole of Granada are one of natural thermic origin due to the low temperatures during the winters and the higher thermic oscillations and those of anthropogenical origin: fundamentally the oxidation of metallic elements and atmospheric pollution due to burnt products. For this reason, the more important deterioration mechanisms are the freezing ones due to the expansion produced in the water retained inside the por...

  13. Colour Changes on the Surface of the Rock Materials Due to UV-A and UV-B Rays

    Science.gov (United States)

    Binal, Adil; Ayderman, Aykut; Sel, Aylin

    2015-04-01

    The colour of the rocks used in the current buildings, and historical monuments is an important parameter in architecture and engineering. In addition, engineering geologists use the colour in order to identify the weathering class of rock material. The main colour of the stone, especially, are affected by the mineral size, the colour of the primary minerals and matrix material, as well as the colour of the accessory minerals. Due to atmospheric effects, changes in the outer surface colour of the rocks used as siding materials occur with over time. Factors causing the colour change are carbon dioxide (CO2), ozone (O3), sulphate (SO2, SO3) and nitrate (NOx) from the atmosphere with aerosols as well as UV rays from the sun. There is no more work in the literature on colour changes caused by UV-A and UV-B rays. In this study, the effects of ultraviolet in the colour of the surfaces of basalt, limestone, ignimbrite, travertine and sandstone have been simulated with a new experimental device in the laboratory medium. Lutron colour analyser (RGB-1002) was used for the measurements of RGB colours. Colour differences between the beginning and end of tests were determined with the standard practice for calculation of colour tolerances and colour differences from instrumentally measured colour coordinates (ASTM D2244). As a result of the experiments performed, lighten that seem on dark-grey micritic limestone (colour change ratio, CCR: 17.06) and basalt samples (CCR: 8.24) become even visually noticeable. Black and red ignimbrite samples having high porosity were presented the lower rate of colour changes. Finally, colour darkening has been observed in the light-coloured travertine (CCR: 13.8) and sandstone samples (CCR: 20.99).

  14. The Use of Numerical Modeling to Address Surface and Subsurface Water Contamination due to Fracwater Spills in Larry's Creek, Pennsylvania

    Science.gov (United States)

    Simon, C. A.; Arjmand, S.; Abad, J. D.

    2012-12-01

    Because of its relatively low carbon dioxide emissions, natural gas is considered to be more efficient and environmentally friendly than other non-renewable fuels. As a result of this, among other factors, in recent years natural gas has become one of the world's primary energy sources. In the United States, drilling to extract natural gas has substantially increased over the past few years. In the Marcellus Shale, unconventional gas is currently extracted by using two new techniques: horizontal drilling and hydraulic fracturing. Today, fracking fluids which have been applied as part of the hydraulic fracturing process to fracture the shale rock and release the gas, pose a major environmental concern. These fluids are highly contaminated with radionuclides and toxic metals and any exposure of this highly polluted water to surface water or soil could heavily contaminate the media. The area selected for the current study is the Larry's Creek, located in Lycoming County in Pennsylvania. Larry's Creek Watershed was adversely affected by coal and iron mines activities in the 19th century. Though, the water quality in this creek was considered to be good as of 2006. Recently, oil and gas drilling activities have raised concerns about the creek's water quality again. A major environmental hazard is the freshwater contamination by frac/flowback water. Drilling companies are using impoundments on site to keep fracwater, and to store and evaporate flowback water. However, these ponds may fail or leak due to construction problems and/or accidents. Close to Saladasburg, Larry's Creek's stream was observed running rich with clay in October 19, 2011. Historical measurements show very high turbidity during this period which has raised questions about water contamination by the gas industry activities in the upper stream of the watershed. An interstate watershed agency has reported spills in Wolf Run in different drilling sites in the Larry's Creek basin. The focus of this study

  15. Uncertainties in surface mass and energy flux estimates due to different eddy covariance sensors and technical set-up

    Science.gov (United States)

    Arriga, Nicola; Fratini, Gerardo; Forgione, Antonio; Tomassucci, Michele; Papale, Dario

    2010-05-01

    Eddy covariance is a well established and widely used methodology for the measurement of turbulent fluxes of mass and energy in the atmospheric boundary layer, in particular to estimate CO2/H2O and heat exchange above ecologically relevant surfaces (Aubinet 2000, Baldocchi 2003). Despite its long term application and theoretical studies, many issues are still open about the effect of different experimental set-up on final flux estimates. Open issues are the evaluation of the performances of different kind of sensors (e.g. open path vs closed path infra-red gas analysers, vertical vs horizontal mounting ultrasonic anemometers), the quantification of the impact of corresponding physical corrections to be applied to get robust flux estimates taking in account all processes concurring to the measurement (e.g. the so-called WPL term, signal attenuation due to air sampling system for closed path analyser, relative position of analyser and anemometer) and the differences between several data transmission protocols used (analogue, digital RS-232, SDM). A field experiment was designed to study these issues using several instruments among those most used within the Fluxnet community and to compare their performances under conditions supposed to be critical: rainy and cold weather conditions for open-path analysers (Burba 2008), water transport and absorption at high air relative humidity conditions for closed-path systems (Ibrom, 2007), frequency sampling limits and recorded data robustness due to different transmission protocols (RS232, SDM, USB, Ethernet) and finally the effect of the displacement between anemometer and analyser using at least two identical analysers placed at different horizontal and vertical distances from the anemometer. Aim of this experiment is to quantify the effect of several technical solutions on the final estimates of fluxes measured at a point in the space and if they represent a significant source of uncertainty for mass and energy cycle

  16. The investigation of the light radiation caused polyethylene based materials deterioration by means of atomic force microscopy

    International Nuclear Information System (INIS)

    Sikora, A; Moroń, L; Wałecki, M; Kryla, P; Grabarek, A

    2016-01-01

    The impact of the environmental conditions on the materials used in various devices and constructions, in particular in electrotechnical applications, has an critical impact in terms of their reliability and utilization range in specific climatic conditions. Due to increasing utilitarian requirements, technological processes complexity and introducing new materials (for instance nanomaterials), advanced diagnostic techniques are desired. One of such techniques is atomic force microscopy (AFM), which allows to study the changes of the roughness and mechanical properties of the surface at the submicrometer scale, enabling the investigation of the degradation processes. In this work the deterioration of selected group of polyethylene based materials have been measured by means of AFM, as the samples were exposed to the simulated solar light and UV-C radiation. Such an analysis of the environmental conditions impact on the deterioration process using AFM methods for various versions of specific material was not presented before. (paper)

  17. Catalyst deterioration over the lifetime of small utility engines.

    Science.gov (United States)

    Doll, Nicholas J; Reisel, John R

    2007-10-01

    In this paper, the deterioration of catalysts in small, four-stroke, spark-ignition engines is described. The laboratory testing performed followed a proven test method that mimics the lifetime of a small air-cooled utility engine operating under normal field conditions. The engines used were single-cylinder, 6.5-hp, side-valve engines. These engines have a nominal 125-hr lifetime. The effectiveness of the catalysts was determined by testing exhaust emissions before and after the catalyst to determine the catalyst's efficiency. This was done several times during the lifetime of the engines to determine the deterioration in the performance of the catalysts at lowering pollutant emissions. Additional testing was performed on the catalysts to determine wear patterns, contamination, and recoverable activity. The results indicate that considerable catalyst deterioration is occurring over the lifetime of the engine. The results reveal that soot buildup, poisons, and active surface loss appear to be the contributing factors to the deterioration. These results were determined after analyzing the exhaust emissions data, scanning electron microscope results analysis, and the impact of regeneration attempts. An ANOVA statistical analysis was performed, and it was determined that the emissions are also impacted, to some degree, by time and the engine itself.

  18. Seed wintering and deterioration characteristics between weedy and cultivated rice

    OpenAIRE

    Baek, Jung-Sun; Chung, Nam-Jin

    2012-01-01

    Background Incidences of weedy rice continuously occurred in paddy fields because its shattering seeds were able to over-winter. In this research, the seed deterioration of weedy rice was investigated compared with cultivated rice, and the wintering characteristics of these two types of rice were investigated with the field wintering test, freezing resistance test, and accelerated aging test. Results For the wintering test, the seeds of weedy rice were placed on the soil surface of a paddy wi...

  19. Structural, chemical surface and transport modifications of regenerated cellulose dense membranes due to low-dose γ-radiation

    International Nuclear Information System (INIS)

    Vazquez, M.I.; Heredia-Guerrero, J.A.; Galan, P.; Benitez, J.J.; Benavente, J.

    2011-01-01

    Research highlights: → Low dose γ-radiation causes slight structural, chemical and morphological changes on regenerated cellulose films. → Induced structural changes increase the fragility of irradiated films. → Structural modifications reduce ion permeability of films. - Abstract: Modifications caused in commercial dense regenerated cellulose (RC) flat membranes by low-dose γ-irradiation (average photons energy of 1.23 MeV) are studied. Slight structural, chemical and morphological surface changes due to irradiation in three films with different RC content were determined by ATR-FTIR, XRD, XPS and AFM. Also, the alteration of their mechanical elasticity has been studied. Modification of membrane performance was determined from solute diffusion coefficient and effective membrane fixed charge concentration obtained from NaCl diffusion measurements. Induced structural changes defining new and effective fracture propagation directions are considered to be responsible for the increase of fragility of irradiated RC membranes. The same structural changes are proposed to explain the reduction of the membrane ion permeability through a mechanism involving either ion pathways elongation and/or blocking.

  20. Interannual Variation of Surface Circulation in the Japan/East Sea due to External Forcings and Intrinsic Variability

    Science.gov (United States)

    Choi, Byoung-Ju; Cho, Seong Hun; Jung, Hee Seok; Lee, Sang-Ho; Byun, Do-Seong; Kwon, Kyungman

    2018-03-01

    The interannual variation of surface ocean currents can be as large as seasonal variation in the Japan/East Sea (JES). To identify the major factors that cause such interannual variability of surface ocean circulation in the JES, surface circulation was simulated from 1998 to 2009 using a three-dimensional model. Contributions of atmospheric forcing (ATM), open boundary data (OBC), and intrinsic variability (ITV) of the surface flow in the JES on the interannual variability of surface ocean circulation were separately examined using numerical simulations. Variability in surface circulation was quantified in terms of variance in sea surface height, 100-m depth water temperature, and surface currents. ITV was found to be the dominant factor that induced interannual variabilities of surface circulation, the main path of the East Korea Warm Current (EKWC), and surface kinetic energy on a time scale of 2-4 years. OBC and ATM were secondary factors contributing to the interannual variation of surface circulation. Interannual variation of ATM changed the separation latitude of EKWC and increased the variability of surface circulation in the Ulleung Basin. Interannual variation of OBC enhanced low-frequency changes in surface circulation and eddies in the Yamato Basin. It also modulated basin-wide uniform oscillations of sea level. This study suggests that precise estimation of initial conditions using data assimilation is essential for long-term prediction of surface circulation in the JES.

  1. Early deterioration of coarse woody debris.

    Energy Technology Data Exchange (ETDEWEB)

    Tainter, Frank, H.; McMinn, James, W.

    1999-02-16

    Tainter, F.H., and J.W. McMinn. 1999. Early deterioration of coarse woody debris. In: Proc. Tenth Bien. South. Silv. Res. Conf. Shreveport, LA, February 16-18, 1999. Pp. 232-237 Abstract - Coarse woody debris (CWD) is an important structural component of southern forest ecosystems. CWD loading may be affected by different decomposition rates on sites of varying quality. Bolts of red oak and loblolly pine were placed on plots at each of three (hydric, mesic. and xerlc) sites at the Savannah River Site and sampled over a I6-week period. Major changes were in moisture content and nonstructural carbohydrate content (total carbohydrates, reducing sugars, and starch) of sapwood. Early changes in nonstructural carbohydrate levels following placement of the bolts were likely due to reallocation of these materials by sapwood parenchyma cells. These carbohydrates later formed pools increasingly metabolized by bacteria and invading fungi. Most prevalent fungi in sapwood were Ceratocysfis spp. in pine and Hypoxy/on spp. in oak. Although pine sapwood became blue stained and oak sapwood exhibited yellow soft decay with black zone lines, estimators of decay (specific gravity, sodium hydroxide solubility, and holocellulose content) were unchanged during the 16-week study period. A small effect of site was detected for starch content of sapwood of both species. Fungal biomass in sapwood of both species, as measured by ergosterol content, was detectable at week zero, increased somewhat by week three and increased significantly by week 16.

  2. Fungal-Induced Deterioration of Mural Paintings: In Situ and Mock-Model Microscopy Analyses.

    Science.gov (United States)

    Unković, Nikola; Grbić, Milica Ljaljević; Stupar, Miloš; Savković, Željko; Jelikić, Aleksa; Stanojević, Dragan; Vukojević, Jelena

    2016-04-01

    Fungal deterioration of frescoes was studied in situ on a selected Serbian church, and on a laboratory model, utilizing standard and newly implemented microscopy techniques. Scanning electron microscopy (SEM) with energy-dispersive X-ray confirmed the limestone components of the plaster. Pigments used were identified as carbon black, green earth, iron oxide, ocher, and an ocher/cinnabar mixture. In situ microscopy, applied via a portable microscope ShuttlePix P-400R, proved very useful for detection of invisible micro-impairments and hidden, symptomless, microbial growth. SEM and optical microscopy established that observed deterioration symptoms, predominantly discoloration and pulverization of painted layers, were due to bacterial filaments and fungal hyphal penetration, and formation of a wide range of fungal structures (i.e., melanized hyphae, chlamydospores, microcolonial clusters, Cladosporium-like conidia, and Chaetomium perithecia and ascospores). The all year-round monitoring of spontaneous and induced fungal colonization of a "mock painting" in controlled laboratory conditions confirmed the decisive role of humidity level (70.18±6.91% RH) in efficient colonization of painted surfaces, as well as demonstrated increased bioreceptivity of painted surfaces to fungal colonization when plant-based adhesives (ilinocopie, murdent), compared with organic adhesives of animal origin (bone glue, egg white), are used for pigment sizing.

  3. Challenges related to flotation cleaning of oil shales. Issues due to compositional and surface features and post-grinding surface behavior

    Directory of Open Access Journals (Sweden)

    Altun N. Emre

    2016-01-01

    Full Text Available Oil shale is an important energy resource alternative. Despite its recognition as an unconventional oil source, oil shale is also considered as an important solid fossil fuel alternative to coal and lignites due to the solid form and remarkable extent of organic content. Utilization possibilites, similar to coal and lignites, have been considered in the past decades and direct use of oil shales in thermal power production has been possible in countries like Estonia and China. In the perspective of utilization of oil shales in a similar manner to coal and lignites, problems and restrictions related to the inorganic ash-making and potentially pollutant constituents are applied. In this respect, cleaning of this important energy source through mineral processing methods, particularly by flotation, is an outstanding option. However, on the basis of unique features and distinctive characteristics, treatment of oil shales like a type of coal is a big perception and may be highly misleading. This paper discusses specific challenges regarding flotation behavior of oil shales with reference to the surface characteristics and behavior of oil shale entities – probably the most important aspect that determines the efficiency and success of the flotation based cleaning process.

  4. Comment on ``Enhanced transmission of light through a gold film due to excitation of standing surface-plasmon Bloch waves"

    OpenAIRE

    Weiner, J.

    2007-01-01

    The purpose of this comment is first to correct a misapprehension of the role played by composite wave diffraction on surface-wave generation at subwavelength structures and second to point out that periodic Bloch structures are unnecessary for the efficient production of the surface plasmon polariton (SPP) guided mode either as traveling or standing waves. Guided surface waves originate from simple slit or groove edges illuminated under normal incidence, and one-dimensional (1-D) surface cav...

  5. Observations of mechanical-hydraulic-geochemical interactions due to drainage of a surface water reservoir in Switzerland

    Science.gov (United States)

    Lunn, R. J.; Kinali, M.; Pytharouli, S.; Shipton, Z.; Stillings, M.; Lord, R.

    2016-12-01

    The drainage and refilling of a surface water reservoir beside the Grimsel Test Site (GTS) underground rock laboratory in Switzerland, has provided a unique opportunity to study in-situ rock mechanical, hydraulic and chemical interactions under large-scale stress changes. The reservoir was drained in October/November 2014 to enable dam maintenance and extension of the regional hydropower tunnel system. Reservoir drainage will have caused rapid unloading of the surrounding rock mass. The GTS sits 37m below the top of the reservoir and 200-600m away laterally within the mountainside on the eastern bank of the reservoir. Gradual refilling of the reservoir, via natural snowmelt and runoff, commenced in February 2015. As part of the European LASMO Project, researchers at Strathclyde, funded by Radioactive Waste Management Ltd., have been investigating mechanical-chemical-hydraulic coupling within the rock mass as an analogue for glacial unloading and loading of a future Geological Disposal Facility. We have deployed three 3-component and 6 single-component micro-seismometers within the GTS and surrounding hydropower tunnel network. In parallel, we have implemented a groundwater sampling programme, using boreholes within the GTS, for temporal determination of geochemistry and flow rate. Preliminary data analyses show geochemical anomalies during unloading, as well as detection of microseismic events. The signal-to-noise ratio of the micro-seismic data is extremely poor. Noise amplitude, and frequency content, variy throughout each day, between days, and from month-to-month on a highly unpredictable basis. This is probably due to the multitude of hydropower turbines and pump-storage systems within the surrounding mountains. To discriminate micro-seismic events, we have developed a new methodology for characterizing background noise within the seismic signal and combined this with cross-correlations techniques generally applied in microseismic analysis of hydraulic

  6. Developing deterioration models for Nebraska bridges.

    Science.gov (United States)

    2011-07-01

    Nebraska Bridge Management System (NBMS) was developed in 1999 to assist in optimizing budget allocation for : the maintenance, rehabilitation and replacement needs of highway bridges. This requires the prediction of bridge : deterioration to calcula...

  7. The deterioration of intermediate moisture foods

    Science.gov (United States)

    Labruza, T. P.

    1971-01-01

    Deteriorative reactions are low and food quality high if intermediate moisture content of a food is held at a water activity of 0.6 to 0.75. Information is of interest to food processing and packaging industry.

  8. Multitasking Scheduling Problems with Deterioration Effect

    Directory of Open Access Journals (Sweden)

    Zhanguo Zhu

    2017-01-01

    Full Text Available Multitasking scheduling problems with a deterioration effect incurred by coexisting behavioral phenomena in human-related scheduling systems including deteriorating task processing times and deteriorating rate-modifying activity (DRMA of human operators are addressed. Under the assumption of this problem, the processing of a selected task suffers from the joint effect of available but unfinished waiting tasks, the position-dependent deterioration of task processing time, and the DRMA of human operators. Traditionally, these issues have been considered separately; herein, we address their integration. We propose optimal algorithms to solve the problems to minimize makespan and the total absolute differences in completion time, respectively. Based on the analysis, some special cases and extensions are also discussed.

  9. Deterioration and cost information for bridge management.

    Science.gov (United States)

    2012-05-01

    This study applies contract bid tabulations and elementlevel condition records to develop elementlevel actions, : costs for actions, transition probabilities for models of deterioration of bridge elements, and transition probabilities : for imp...

  10. Land-atmosphere interactions due to anthropogenic and natural changes in the land surface: A numerical modeling study

    Science.gov (United States)

    Yang, Zhao

    Alterations to the land surface can be attributed to both human activity and natural variability. Human activities, such as urbanization and irrigation, can change the conditions of the land surface by altering albedo, soil moisture, aerodynamic roughness length, the partitioning of net radiation into sensible and latent heat, and other surface characteristics. On the other hand, natural variability, manifested through changes in atmospheric circulation, can also induce land surface changes. These regional scale land surface changes, induced either by humans or natural variability, can effectively modify atmospheric conditions through land-atmosphere interactions. However, only in recent decades have numerical models begun to include representations of the critical processes driving changes at the land surface, and their associated effects on the overlying atmosphere. In this work we explore three mechanisms by which changes to the land surface - both anthropogenic and naturally induced - impact the overlying atmosphere and affect regional hydroclimate. (Abstract shortened by ProQuest.).

  11. Deteriorating Inventory Model for Chilled Food

    OpenAIRE

    Yang, Ming-Feng; Tseng, Wei-Chung

    2015-01-01

    With many aspects that affect inventory policy, product perishability is a critical aspect of inventory policy. Most goods will deteriorate during storage and their original value will decline or be lost. Therefore, deterioration should be taken into account in inventory practice. Chilled food products are very common consumer goods that are, in fact, perishable. If the chilled food quality declines over time customers are less likely to buy it. The value the chilled food retains is, however,...

  12. Early warnings of heart rate deterioration

    OpenAIRE

    Almeida, Vânia G.; Nabney, Ian T.

    2016-01-01

    Hospitals can experience difficulty in detecting and responding to early signs of patient deterioration leading to late intensive care referrals, excess mortality and morbidity, and increased hospital costs. Our study aims to explore potential indicators of physiological deterioration by the analysis of vital-signs. The dataset used comprises heart rate (HR) measurements from MIMIC II waveform database, taken from six patients admitted to the Intensive Care Unit (ICU) and diagnosed with sever...

  13. Rule based deterioration identification and management system

    International Nuclear Information System (INIS)

    Kataoka, S.; Pavinich, W.; Lapides, M.

    1993-01-01

    Under the sponsorship of IHI and EPRI, a rule-based screening system has been developed that can be used by utility engineers to determine which deterioration mechanisms are acting on specific LWR components, and to evaluate the efficacy of an age-related deterioration management program. The screening system was developed using the rule-based shell, NEXPERT, which provides traceability to the data sources used in the logic development. The system addresses all the deterioration mechanisms of specific metals encountered in either BWRs or PWRs. Deterioration mechanisms are listed with reasons why they may occur during the design life of LWRs, considering the plant environment, manufacturing process, service history, material chemical composition, etc. of components in a specific location of a LWR. To eliminate the evaluation of inactive deterioration quickly, a tier structure is applied to the rules. The reasons why deterioration will occur are extracted automatically by backward chaining. To reduce the amount of user input, plant environmental data are stored in files as default environmental data. (author)

  14. Deterioration of plasticized PVC components in Apollo spacesuits

    DEFF Research Database (Denmark)

    Shashoua, Yvonne; Schnell, Ulrich; Young, Lisa

    2002-01-01

    in the Life Support System, used to transport air and water to the astronaut, and in the Liquid Cooling Garment, used to cool the wearer of the spacesuit, exhibited high levels of deterioration. Tubing was unacceptably discoloured, tacky to the touch and surfaces were obscured by crystals. Visual examination......, Fourier Transform infrared spectroscopy and Low-Vacuum scanning electron microscopy suggested that discolouration was a result of dehydrochlorination of the PVC polymer, tackiness was caused by migration of di (2-ethylhexyl) phthalate (DEHP) plasticizer to surfaces, and phthalic acid crystals formed...

  15. Frequency lock-in and phase synchronization of vortex shedding behind circular cylinder due to surface waves

    Science.gov (United States)

    Gunnoo, Hans; Abcha, Nizar; Ezersky, Alexander

    2016-02-01

    The influence of harmonic surface wave on non-regular Karman Vortex Street is investigated. In our experiments, Karman Street arises behind a vertical circular cylinder in a water flow and harmonic surface waves propagating upstream. It is found that surface waves can modify regimes of shedding in Karman Street: frequency lock-in and synchronization of vortex shedding can arise. Intensive surface waves can excite symmetric vortex street instead of chess-like street, and completely suppress shedding behind the cylinder. It is shown experimentally that such effects occur if frequency of harmonic surface wave is approximately twice higher than the frequency of vortex shedding. Region of frequency lock-in is found on the plane amplitude-frequency of surface wave.

  16. Experimental and theoretical studies of the streaming flow due to the adsorption of particles at a liquid surface

    Science.gov (United States)

    Singh, P.; Musunuri, N.; Benouaguef, I.; Fischer, I.

    2017-11-01

    The particle image velocimetry (PIV) technique is used to study the streaming flow that is induced when particles are adsorbed at a liquid surface. The flow develops within a fraction of second after the adsorption of the particle. The fluid directly below the particle rises upward, and near the surface, it moves away from the particle. The flow causes powders sprinkled on a liquid surface to disperse on the surface. The flow strength, and the volume over which it extends, decreases with decreasing particle size. The streaming flow induced by the adsorption of two or more particles is a combination of the flows which they induce individually. Work supported by NSF.

  17. Reliability analysis and updating of deteriorating systems with subset simulation

    DEFF Research Database (Denmark)

    Schneider, Ronald; Thöns, Sebastian; Straub, Daniel

    2017-01-01

    An efficient approach to reliability analysis of deteriorating structural systems is presented, which considers stochastic dependence among element deterioration. Information on a deteriorating structure obtained through inspection or monitoring is included in the reliability assessment through B...

  18. Elevation change of the Greenland Ice Sheet due to surface mass balance and firn processes, 1960-2014

    NARCIS (Netherlands)

    Kuipers Munneke, P.; Ligtenberg, S. R M; Noël, B. P Y; Howat, I. M.; Box, J. E.; Mosley-Thompson, E.; McConnell, J. R.; Steffen, K.; Harper, J. T.; Das, S. B.; Van Den Broeke, M. R.

    2015-01-01

    Observed changes in the surface elevation of the Greenland Ice Sheet are caused by ice dynamics, basal elevation change, basal melt, surface mass balance (SMB) variability, and by compaction of the overlying firn. The last two contributions are quantified here using a firn model that includes

  19. Enlarged occlusal surfaces on first molars due to severe attrition and hypercementosis: examples from prehistoric coastal populations of Texas.

    Science.gov (United States)

    Comuzzie, A G; Steele, D G

    1989-01-01

    During an examination of prehistoric samples from the Texas coast, individuals consistently exhibited a suite of traits on the first molars that included severe wear, hypercementosis, and resorption of the buccal margin of the alveolus. The occlusal surface of the tooth was worn below the cervical margin, with the subsequent incorporation of the buccal surface of the buccal roots into the occlusal plane. This expanded occlusal surface, which extends the buccal surface beyond the normal edge of the tooth, is composed of a combination of original enamel, secondary dentin, and cementum. There is a marked rounding of the buccal aspect of the occlusal surface. These conditions were noted in both maxillary and mandibular first molars. The resorption of alveolar bone surrounding the buccal roots resembles resorption associated with periodontal infection and is thought to be the result of severe levels of stress being applied to this portion of the dentition.

  20. Decision analysis for deteriorating structures

    International Nuclear Information System (INIS)

    Val, Dimitri V.; Stewart, Mark G.

    2005-01-01

    Measures that improve durability of a structure usually increase its initial cost. Thus, in order to make a decision about a cost-effective solution the life-cycle cost of a structure including cost of structural failure needs to be considered. Due to uncertainties associated with structural properties, loads and environmental conditions the cost of structural failure is a random variable. The paper derives probability distributions of the cost of failure of a single structure and a group of identical structures when single or multiple failures are possible during the service life of a structure. The probability distributions are based on cumulative probabilities of failure of a single structure over its service life. It is assumed that failures occur at discrete points in time, the cost of failure set at the time of decision making remains constant for a particular design solution and the discount rate is a deterministic parameter not changing with time. The probability distributions can be employed to evaluate the expected life-cycle cost or the expected utility, which is then used in decision making. An example, which considers the selection of durability specifications for a reinforced concrete structure built on the coast, illustrates the use of the derived probability distributions

  1. Quantifying reinforced concrete bridge deck deterioration using ground penetrating radar

    Science.gov (United States)

    Martino, Nicole Marie

    Bridge decks are deteriorating at an alarming rate due to corrosion of the reinforcing steel, requiring billions of dollars to repair and replace them. Furthermore, the techniques used to assess the decks don't provide enough quantitative information. In recent years, ground penetrating radar (GPR) has been used to quantify deterioration by comparing the rebar reflection amplitudes to technologies serving as ground truth, because there is not an available amplitude threshold to distinguish healthy from corroded areas using only GPR. The goal of this research is to understand the relationship between GPR and deck deterioration, and develop a model to determine deterioration quantities with GPR alone. The beginning of this research determines that not only is the relationship between GPR and rebar corrosion stronger than the relationship between GPR and delaminations, but that the two are exceptionally correlated (90.2% and 86.6%). Next, multiple bridge decks were assessed with GPR and half-cell potential (HCP). Statistical parameters like the mean and skewness were computed for the GPR amplitudes of each deck, and coupled with actual corrosion quantities based on the HCP measurements to form a future bridge deck model that can be used to assess any deck with GPR alone. Finally, in order to understand exactly which component of rebar corrosion (rust, cracking or chloride) attenuates the GPR data, computational modeling was carried out to isolate each variable. The results indicate that chloride is the major contributor to the rebar reflection attenuation, and that computational modeling can be used to accurately simulate GPR attenuation due to chloride.

  2. The Effect of Thermal Radiation on Entropy Generation Due to Micro-Polar Fluid Flow Along a Wavy Surface

    Directory of Open Access Journals (Sweden)

    Kuei-Hao Chang

    2011-09-01

    Full Text Available In this study, the effect of thermal radiation on micro-polar fluid flow over a wavy surface is studied. The optically thick limit approximation for the radiation flux is assumed. Prandtl’s transposition theorem is used to stretch the ordinary coordinate system in certain directions. The wavy surface can be transferred into a calculable plane coordinate system. The governing equations of micro-polar fluid along a wavy surface are derived from the complete Navier-Stokes equations. A simple transformation is proposed to transform the governing equations into boundary layer equations so they can be solved numerically by the cubic spline collocation method. A modified form for the entropy generation equation is derived. Effects of thermal radiation on the temperature and the vortex viscosity parameter and the effects of the wavy surface on the velocity are all included in the modified entropy generation equation.

  3. Drag penalty due to the asperities in the substrate of super-hydrophobic and liquid infused surfaces

    Science.gov (United States)

    Garcia Cartagena, Edgardo J.; Arenas, Isnardo; Leonardi, Stefano

    2017-11-01

    Direct numerical simulations of two superposed fluids in a turbulent channel with a textured surface made of pinnacles of random height have been performed. The viscosity ratio between the two fluids are N =μo /μi = 50 (μo and μi are the viscosities of outer and inner fluid respectively) mimicking a super-hydrophobic surface (water over air) and N=2.5 (water over heptane) resembling a liquid infused surface. Two set of simulations have been performed varying the Reynolds number, Reτ = 180 and Reτ = 390 . The interface between the two fluids is flat simulating infinite surface tension. The position of the interface between the two fluids has been varied in the vertical direction from the base of the substrate (what would be a rough wall) to the highest point of the roughness. Drag reduction is very sensitive to the position of the interface between the two fluids. Asperities above the interface induce a large form drag and diminish considerably the drag reduction. When the mean height of the surface measured from the interface in the outer fluid is greater than one wall unit, k+ > 1 , the drag increases with respect to a smooth wall. Present results provide a guideline to the accuracy required in manufacturing super-hydrophobic and liquid infused surfaces. This work was supported under ONR MURI Grants N00014-12-0875 and N00014-12- 1-0962, Program Manager Dr. Ki-Han Kim. Numerical simulations were performed on the Texas Advanced Computer Center.

  4. Thermal switching of the electrical conductivity of Si(111)(√3x√3)Ag due to a surface phase transition

    International Nuclear Information System (INIS)

    Wells, J W; Kallehauge, J F; Hofmann, Ph

    2007-01-01

    The temperature-dependent surface conductivity of the Si(111)(√3x√3)Ag surface was measured using a microscopic four-point probe. The conductivity was found to undergo a sharp increase of about three orders of magnitude when the system was heated above about 220 K. This strong conductivity change is reversible and attributed to the phase transition which is generally believed to occur on this surface. It is also shown that, in order to find the true surface conductivity, it is necessary to separate it from the contribution of the bulk and space charge layer. In this work, this is achieved by using a finite-element model. A percolating network of Ag islands on Si(111) was also studied and a much simpler behaviour (compared to that of Si(111))(√3x√3)Ag) was found. The temperature-dependent conductivity of this system was found to display typical metallic behaviour. The absolute value of the conductivity is comparable to the value expected by modelling the Ag film as exhibiting the bulk Ag transport properties

  5. Can Sensors Solve the Deterioration Problems of Public Infrastructure?

    Science.gov (United States)

    Miki, Chitoshi

    2014-11-01

    Various deteriorations are detected in public infrastructures, such as bridges, viaducts, piers and tunnels and caused fatal accidents in some cases. The possibility of the applications of health monitoring by using sensors is the issues of this lecture. The inspection and diagnosis are essential in the maintenance works which include appropriate rehabilitations and replacements. The introduction of monitoring system may improve accuracy and efficiency of inspection and diagnosis. This seems to be innovation of maintenance, old structures may change smart structures by the installation of nerve network and brain, specifically. Cost- benefit viewpoint is also important point, because of public infrastructures. The modes of deterioration are fatigue, corrosion, and delayed fracture in steel, and carbonization and alkali aggregate reaction in concrete. These are like adult disease in human bodies. The developments of Infrastructures in Japan were concentrated in the 1960th and 1970th. These ages are approaching 50 and deterioration due to aging has been progress gradually. The attacks of earthquakes are also a major issue. Actually, these infrastructures have been supporting economic and social activities in Japan and the deterioration of public infrastructure has become social problems. How to secure the same level of safety and security for all public infrastructures is the challenge we face now. The targets of monitoring are external disturbances such as traffic loads, earthquakes, winds, temperature, responses against external disturbances, and the changes of performances. In the monitoring of infrastructures, 3W1H(WHAT, WHERE, WHEN and HOW) are essential, that is what kind of data are necessary, where sensors place, when data are collected, and how to collect and process data. The required performances of sensors are accuracy, stability for long time. In the case of long term monitoring, the durability of systems needs more than five years, because the interval

  6. Evaluating the Rate of Stone Art Deterioration in Wadi Maghara and Wadi Mukattab, Sinai, Egypt

    Directory of Open Access Journals (Sweden)

    Sayed HEMEDA

    2012-06-01

    Full Text Available One of the key reasons for the status of Wadi Maghara and Wadi Mukattab as World Heritage Sites is the abundance of stone art present there. Unfortunately, in time, much of the stone art heritage in the two archaeological sites was lost, due to natural stone weathering processes, to static and dynamic actions and lately, due to the lack of preservation measures and to the action of people. That fragile art heritage is non-renewable and, therefore, it requires specialized management. Several stone facades in Wadi Maghara have embossed inscriptions of early rulers of Egypt, that document their expeditions to mine precious minerals, primarily turquoise and copper, that were found in the area. Wadi Mukattab (south of Wadi Maghara is the valley of inscriptions. Over a distance of 3 km along this valley inscriptions can be found on the mountain rocks that have mostly been made by Nabateans (2nd and 3rd Century but also by others, such as pilgrims, soldiers, merchants, throughout the centuries. In our case study, inscriptions from specific study areas were analyzed by using SEM, polarizing microscope, XRD, SEM with EDX, DTA-TGA, Grain Size Distribution, Pore Media Characterization and some stone samples were tested in the stone mechanics laboratory, to determine the physical and mechanical characteristics of the stone with carved inscriptions. Digital photographs were taken, with Geographic Information Systems software. Older images were compared with more recent ones and in order to classify and quantify the amount of deterioration that occurred over time. Various methodologies were applied to classify the images, and it was found that manual digitizing provided the best means for quantifying the amount of deterioration. Results showed that the damage was primarily caused due to the instability of stone structures, because of the extensive jointing and rock fall gravity, due to dynamic actions and the granular disaggregation of the stone surface. The

  7. Bio-deterioration of breadfruit (Artocarpus Communis)

    African Journals Online (AJOL)

    Gaga E Tonukari

    deteriorating breadfruit in storage The freshly harvested breadfruit has 70.2% carbohydrate which reduced to 59.4% within 9 days of storage under room temperature. The amount of fat content, protein and the energy of the breadfruit also reduced in fruit samples stored for 9 days, while there was an increase in the moisture ...

  8. Modelling of Deterioration Effects on Concrete Structures

    Directory of Open Access Journals (Sweden)

    B. Teplý

    2002-01-01

    Full Text Available In order to predict the service life of concrete structures models for deterioration effects are needed. This paper has the form of a survey, listing and describing such analytical models, namely carbonation of concrete, ingress of chlorides, corrosion of reinforcing steel and prestressing tendons. The probabilistic approach is applied.

  9. Prediction of Deterioration of Concrete Bridges

    NARCIS (Netherlands)

    Gaal, G.C.M.

    2004-01-01

    In the early 20th century, the general idea was that concrete structures would never show deterioration. However, in the 1990s concrete structures showed an increase in number of cracks and area of spalling. Especially spalling of the concrete cover could create a harmful situation to the users.

  10. Volume changes of Vatnajökull ice cap, Iceland, due to surface mass balance, ice flow, and subglacial melting at geothermal areas

    DEFF Research Database (Denmark)

    Magnússon, Eyjólfur; Björnson, Helgi; Dall, Jørgen

    2005-01-01

    We present observed changes in the geometry of western Vatnajökull over a period of about ten years which are caused by the surface mass balance, ice flow (both during surges and quiescent periods), and basal melting due to geothermal and volcanic activity. Comparison of two digital elevation...

  11. Microbial deterioration of Mayan stone buildings at Uxmal, Yucatan, Mexico

    International Nuclear Information System (INIS)

    Ortega-Morales, O.; Guezennec, J.; Hernandez D, G.; Jozsa, P.; Sand, W.; Crassous, P.

    1998-01-01

    The microbial communities associated to Uxmal Mayan monuments (Yucatan, Mexico) and their role in stone deterioration were preliminary characterized by chemical, biochemical, microbiological, microscopical and surface analysis methods under two climatic seasons (1997). The organic matter and organic carbon and nitrogen were in the range of those reported for other stone buildings, indicating that oligo trophic conditions prevail at Uxmal. Quantitative differences in microbial biomass was higher at indoor section were the organic matter content was the highest and micro-environmental conditions (availability of water and protection to direct sunlight) are more suitable for microbial growth. The microbiological analysis underestimated the microbial biomass, as revealed by biochemical approaches. Nitrate and nitrite-oxidizing, metilotrophic and heterotrophic bacteria and fungi were detected in most surfaces. The heterotrophic bacteria were the most abundant microbial group (microbiological data). However, the chlorophyll profiles and Scanning Electron Microscopy showed that the microalgae are the most abundant colonizers in Uxmal stone buildings. EDAX analysis showed that the most surfaces were covered by an organic layer (cells and exo polymers). Gypsum was found in few samples. The large photo trophic biomass seems to play a role in stone bio deterioration by supporting growth of heterotrophic microorganisms (bacteria and fungi) which are known to produce organic acids leading to calcite dissolution and cations chelation. Further studies are being carried out in order to determine the role of exo polysaccharides which are thought to play a role in chemical degradation of limestone substrates in Uxmal. (Author)

  12. Temperature-dependent surface modification of Ta due to high-flux, low-energy He+ ion irradiation

    International Nuclear Information System (INIS)

    Novakowski, T.J.; Tripathi, J.K.; Hassanein, A.

    2015-01-01

    This work examines the response of Tantalum (Ta) as a potential candidate for plasma-facing components (PFCs) in future nuclear fusion reactors. Tantalum samples were exposed to high-flux, low-energy He + ion irradiation at different temperatures in the range of 823–1223 K. The samples were irradiated at normal incidence with 100 eV He + ions at constant flux of 1.2 × 10 21 ions m −2  s −1 to a total fluence of 4.3 × 10 24 ions m −2 . An additional Ta sample was also irradiated at 1023 K using a higher ion fluence of 1.7 × 10 25 ions m −2 (at the same flux of 1.2 × 10 21 ions m −2  s −1 ), to confirm the possibility of fuzz formation at higher fluence. This higher fluence was chosen to roughly correspond to the lower fluence threshold of fuzz formation in Tungsten (W). Surface morphology was characterized with a combination of field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). These results demonstrate that the main mode of surface damage is pinholes with an average size of ∼70 nm 2 for all temperatures. However, significantly larger pinholes are observed at elevated temperatures (1123 and 1223 K) resulting from the agglomeration of smaller pinholes. Ex situ X-ray photoelectron spectroscopy (XPS) provides information about the oxidation characteristics of irradiated surfaces, showing minimal exfoliation of the irradiated Ta surface. Additionally, optical reflectivity measurements are performed to further characterize radiation damage on Ta samples, showing gradual reductions in the optical reflectivity as a function of temperature.

  13. Error in Radar-Derived Soil Moisture due to Roughness Parameterization: An Analysis Based on Synthetical Surface Profiles

    Directory of Open Access Journals (Sweden)

    Bernard De Baets

    2009-02-01

    Full Text Available In the past decades, many studies on soil moisture retrieval from SAR demonstrated a poor correlation between the top layer soil moisture content and observed backscatter coefficients, which mainly has been attributed to difficulties involved in the parameterization of surface roughness. The present paper describes a theoretical study, performed on synthetical surface profiles, which investigates how errors on roughness parameters are introduced by standard measurement techniques, and how they will propagate through the commonly used Integral Equation Model (IEM into a corresponding soil moisture retrieval error for some of the currently most used SAR configurations. Key aspects influencing the error on the roughness parameterization and consequently on soil moisture retrieval are: the length of the surface profile, the number of profile measurements, the horizontal and vertical accuracy of profile measurements and the removal of trends along profiles. Moreover, it is found that soil moisture retrieval with C-band configuration generally is less sensitive to inaccuracies in roughness parameterization than retrieval with L-band configuration.

  14. The Effects of Approach Angle and Rake Angle Due to Chatter Vibrations on Surface Roughness in Turning

    OpenAIRE

    NEŞELİ, Süleyman; YALDIZ, Süleyman

    2007-01-01

    In this study, the effect of the chatter vibrations depend on tool geometry on surface roughness in turning has been investigated. Machining process in universal lathe is carried out on AISI 1040 steel in dry cutting condition using various approaching/entering angles (60°, 75°, 90°) and rake angles (-3°,-6°,-9°) at depth of cut of 0.5 mm. During cutting processes, tool nose radius and tool overhang (tool noise of kept point distance) and cutting speed, feed rate and spindle speed as cutting ...

  15. Craters in concrete slabs due to detonation – drawbacks of material models with a Mohr-Coulomb yield surface

    Directory of Open Access Journals (Sweden)

    Conrad Markus

    2015-01-01

    Full Text Available Numerical simulations have been performed with a commercial distributed explicit FE-solver and the results have been compared with experiments. High explosive was placed in front of different concrete slabs with the dimension 100 × 100 × 16 cm. Some of the results of the simulations, in particular the profile of the craters, are not in agreement with the test results. Therefore the key characteristics of the constitutive equation based on Mohr-Coulomb yield surfaces and a damage evolution linked to the plastic strain has been reviewed.

  16. Influence of nuclear glasses composition on their liability to deterioration

    International Nuclear Information System (INIS)

    Tovena, I.

    1995-01-01

    The aim of this thesis is to contribute to the study of the nuclear glasses composition influence on their liability to deterioration. The methodology of the experimental research used has lead to define between the thirty oxides which form the reference glass light water, six oxides of interest. For each of these oxides, a composition variation area has been defined. A matrix of twenty glass compositions has then been defined. The preparation of materials of these compositions has sometimes lead to materials weakly heterogeneous which have been characterized before deterioration. This study has been completed by those of three glasses in a composition variation area narrower of the light water nuclear glass : the R7T7 and two glasses at limits having respectively an initial dissolution velocity at 100 degrees Celsius theoretically maximum and minimum. Some deterioration parameters in pure water have been experimentally measured on the twenty three glasses : 1) an initial dissolution velocity at 100 degrees (Vo 1 00) Celsius and another one at 90 degrees Celsius (Vo 9 0) 2) a dissolution velocity in conditions near the saturation at 90 degrees Celsius 3) an apparent solubility of glass based on the ortho silicic acid activity 4) the evolution of the dissolution kinetics at 90 degrees Celsius in sub-saturated medium towards saturated medium 5) the alteration films nature developed at the glasses surface during these last alteration tests. Some thermodynamic and structural models have been studied in order to predict Vo 9 0 and Vo 1 00. The dissolution kinetic law developed from reference glass dissolution results has been studied with the calculation code LIXIVER. It has not been able to be used for most of the glasses compositions studied. As a consequence, the glasses dissolution control by a surface reaction which are itself controlled by the only dissolved silica is an hypothesis which is not verified for the greater part of the glasses. (O.L.). refs., figs

  17. Effect of water-surface discharge on the inactivation of Bacillus subtilis due to protein lysis and DNA damage.

    Science.gov (United States)

    Kadowaki, Kazunori; Sone, Toshifumi; Kamikozawa, Takashi; Takasu, Hiroyuki; Suzuki, Satoru

    2009-09-01

    The effect of water-surface discharge on the inactivation of Bacillus subtilis ATCC6633 in water was examined by using a very short high-voltage pulse generator. The surviving number of spore cells at 10(4) CFU/ml in initial concentration exponentially decreased with increasing discharge-treatment time. The input energy into the water-surface discharge under an O(2) gas flow for reduction in the survival number to 10% was lower than that under an air flow because many oxidation agents such as ozone and OH radical were produced under the O(2) gas flow. The input energy density for the one-tenth reduction depended not only on the spore state but also on the initial cell concentration. The input energy for the high-concentration spore cells (10(7) CFU/ml) was much higher than that for the low-concentration spore cells (10(4) CFU/ml). Cellular proteins and DNA were degraded by a 30-min discharge treatment of vegetative cells, whereas DNA of the high-concentration spore cells was relatively resistant.

  18. Modulation of immunogenicity of poly(sarcosine) displayed on various nanoparticle surfaces due to different physical properties.

    Science.gov (United States)

    Kim, Cheol Joo; Hara, Eri; Watabe, Naoki; Hara, Isao; Kimura, Shunsaku

    2017-12-01

    Poly(sarcosine) displayed on polymeric micelle is reported to trigger a T cell-independent type2 reaction with B1a cells in the mice to produce IgM and IgG3 antibodies. In addition to polymeric micelle, three kinds of vesicles displaying poly(sarcosine) on surface were prepared here to evaluate the amounts and avidities of IgM and IgG3, which were produced in mice, to correlate them with physical properties of the molecular assemblies. The largest amount of IgM was produced after twice administrations of a polymeric micelle of 35 nm diameter (G1). On the other hand, the production amount of IgG3 became the largest after twice administrations of G3 (vesicle of 229 nm diameter) or G4 (vesicle of 85 nm diameter). The augmented avidity of IgG3 after the twice administrations compared with that at the single administration was the highest with G3. These differences in immune responses are discussed in terms of surface density of poly(sarcosine) chains, nanoparticle size, hydrophobic component of poly(L-lactic acid) or (Leu- or Val-Aib) n , and membrane elasticity of the nanoparticles. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

  19. HerMES: A DEFICIT IN THE SURFACE BRIGHTNESS OF THE COSMIC INFRARED BACKGROUND DUE TO GALAXY CLUSTER GRAVITATIONAL LENSING

    International Nuclear Information System (INIS)

    Zemcov, M.; Cooray, A.; Bock, J.; Dowell, C. D.; Nguyen, H. T.; Blain, A.; Béthermin, M.; Clements, D. L.; Conley, A.; Glenn, J.; Conversi, L.; Farrah, D.; Oliver, S. J.; Roseboom, I. G.; Griffin, M.; Halpern, M.; Marsden, G.; Jullo, E.; Kneib, J.-P.; Richard, J.

    2013-01-01

    We have observed four massive galaxy clusters with the SPIRE instrument on the Herschel Space Observatory and measure a deficit of surface brightness within their central region after removing detected sources. We simulate the effects of instrumental sensitivity and resolution, the source population, and the lensing effect of the clusters to estimate the shape and amplitude of the deficit. The amplitude of the central deficit is a strong function of the surface density and flux distribution of the background sources. We find that for the current best fitting faint end number counts, and excellent lensing models, the most likely amplitude of the central deficit is the full intensity of the cosmic infrared background (CIB). Our measurement leads to a lower limit to the integrated total intensity of the CIB of I 250μm >0.69 -0.03 +0.03 (stat.) -0.06 +0.11 (sys.) MJy sr –1 , with more CIB possible from both low-redshift sources and from sources within the target clusters. It should be possible to observe this effect in existing high angular resolution data at other wavelengths where the CIB is bright, which would allow tests of models of the faint source component of the CIB.

  20. In situ surface-enhanced Raman spectroscopy effect in zeolite due to Ag2Se quantum dots

    International Nuclear Information System (INIS)

    Martinez-Nuñez, C. E.; Cortez-Valadez, M.; Delgado-Beleño, Y.; Flores-López, N. S.; Román-Zamorano, J. F.; Flores-Valenzuela, J.; Flores-Acosta, M.

    2017-01-01

    This study shows the presence of surface-enhanced Raman spectroscopy (SERS) effect caused by Ag 2 Se quantum dots embedded in the zeolite matrix. The quantum dots that were synthesised and stabilised in the matrix of F9-NaX zeolite show a size of 5 nm and a quasi-spherical morphology. The calculated interplanar distances confirm the presence of quantum dots in cubic phase Im-m. We suppose that the in situ SERS effect in the material is caused by chemical-enhancement mechanism (CEM). The density functional theory (DFT) is undertaken to corroborate our hypothesis. The structure H 8 Si 8 Al 8 O 12 represents the zeolite cavity unit, and small clusters of (Ag 2 Se) n represent the quantum dots. Both structures interact in the cavity to obtain the local minimum of the potential energy surface, leading to new molecular orbitals. After the analysis of the predicted Raman spectrum, the Raman bands increase significantly, agreeing with the experimental results at low wavenumbers in F9-NaX zeolite.

  1. In situ surface-enhanced Raman spectroscopy effect in zeolite due to Ag{sub 2}Se quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Nuñez, C. E. [Universidad de Sonora, Departamento de Investigación en Física (Mexico); Cortez-Valadez, M., E-mail: jose.cortez@unison.mx, E-mail: manuelcortez@live.com [Universidad de Sonora, CONACYT-Departamento de Investigación en Física (Mexico); Delgado-Beleño, Y.; Flores-López, N. S. [Universidad de Sonora, Departamento de Investigación en Física (Mexico); Román-Zamorano, J. F. [Centro de Investigación y Desarrollo Tecnológico en Electroquímica (Mexico); Flores-Valenzuela, J. [Universidad Autónoma de Sinaloa (Mexico); Flores-Acosta, M. [Universidad de Sonora, Departamento de Investigación en Física (Mexico)

    2017-02-15

    This study shows the presence of surface-enhanced Raman spectroscopy (SERS) effect caused by Ag{sub 2}Se quantum dots embedded in the zeolite matrix. The quantum dots that were synthesised and stabilised in the matrix of F9-NaX zeolite show a size of 5 nm and a quasi-spherical morphology. The calculated interplanar distances confirm the presence of quantum dots in cubic phase Im-m. We suppose that the in situ SERS effect in the material is caused by chemical-enhancement mechanism (CEM). The density functional theory (DFT) is undertaken to corroborate our hypothesis. The structure H{sub 8}Si{sub 8}Al{sub 8}O{sub 12} represents the zeolite cavity unit, and small clusters of (Ag{sub 2}Se){sub n} represent the quantum dots. Both structures interact in the cavity to obtain the local minimum of the potential energy surface, leading to new molecular orbitals. After the analysis of the predicted Raman spectrum, the Raman bands increase significantly, agreeing with the experimental results at low wavenumbers in F9-NaX zeolite.

  2. Assessment Of The Deterioration Degree Of Airfield Pavement Functional Constituents Made Of Cement Concrete

    Directory of Open Access Journals (Sweden)

    Barszcz Piotr

    2014-12-01

    Full Text Available The characteristic feature of the approach to the analysis of the airfield pavement deterioration degree as outlined in this paper is the fact that not only existing deteriorations are taken into account of but also already completed historical repairs. This approach enables determination of resources needed to conduct repairs and setting up reasonable schedules of future overhauls. The proposed index of the pavement deterioration degree, calculated on the basis of measured deficiencies and past repairs, makes it possible to assess the technical condition of the airfield pavement in a comprehensive manner. The key information indispensable to evaluate the degree of deterioration of the airfield pavement surface includes data which can be acquired from already completed stocktaking inventories. The stocktaking process is based on the catalogue of deficiencies typical for airfield pavements and the rules for stocktaking measurements.

  3. Computational analysis of the effect of surface roughness on the deflection of gold coated silicon micro-cantilevers due to molecular adsorption

    Science.gov (United States)

    Hayden, Victor

    In this work numerical simulations were performed in order to study the effects of surface roughness on the deflection of gold coated silicon cantilevers due to molecular adsorption. The cantilever was modeled using a ball and spring system where the spring constants for the Si-Si, Si-Au, and Au-Au bonds were obtained from first principal calculations. The molecular adsorption process was simulated by elongating the natural bond length at available bonding sites chosen randomly on the cantilever. Increasing the bond length created a surface stress on the cantilever causing it to deflect. In all cases the structure refinement was performed by minimizing the energy of the system using a simulated annealing algorithm and a high quality random number generator called Mersenne Twister. The system studied consisted of a 1 micrometer by 1 micrometer portion of a cantilever of various surface roughnesses with variable boundary condition and was processed in parallel on the ACEnet (Atlantic Computational Excellence Network) cluster. The results have indicated that cantilevers with a rougher gold surface deflected more than those with a smoother surface. The increase in deflection is attributed to an increase in stress raisers in the gold film localized around the surface features. The onset of stress raisers increases the differential stress between the top and bottom surfaces and results in an increase in the deflection of the cantilever.

  4. Modeling Change in Watershed Streamflow, Groundwater Recharge and Surface Water - Groundwater Interactions Due to Irrigation and Associated Diversions and Pumping

    Science.gov (United States)

    Essaid, H.; Caldwell, R. R.

    2015-12-01

    The impacts of irrigation and associated surface water (SW) diversions and groundwater (GW) pumping on instream flows, groundwater recharge and SW-GW interactions are being examined using a watershed-scale coupled SW-GW flow model. The U.S. Geological Survey (USGS) model GSFLOW (Markstrom et al., 2008), an integration of the USGS Precipitation-Runoff Modeling System (PRMS) and the Modular Ground-Water Flow Model (MODFLOW), is being utilized for this effort. Processes represented in this model include daily rain, snowfall, snowmelt, streamflow, surface runoff, interflow, infiltration, soil-zone evapotranspiration, and subsurface unsaturated and groundwater flow and evapotranspiration. The Upper Smith River watershed, an important agricultural and recreational area in west-central Montana, is being used as the basis for watershed climate, topography, hydrography, vegetation, soil properties as well as scenarios of irrigation and associated practices. The 640 square kilometer watershed area has been discretized into coincident 200 m by 200 m hydrologic response units (for climate and soil zone flow processes) and grid blocks (for unsaturated zone and GW flow processes). The subsurface GW system is discretized into 6 layers representing Quaternary alluvium, Tertiary sediments and bedrock. The model is being used to recreate natural, pre-development streamflows and GW conditions in the watershed. The results of this simulation are then compared to a simulation with flood and sprinkler irrigation supplied by SW diversion and GW pumping to examine the magnitude and timing of changes in streamflow, groundwater recharge and SW-GW interactions. Model results reproduce observed hydrologic responses to both natural climate variability and irrigation practices. Periodic irrigation creates increased evapotranspiration and GW recharge in cultivated areas of the watershed as well as SW-GW interactions that are more dynamic than under natural conditions.

  5. Calculation of the Induced Charge Distribution on the Surface of a Metallic Nanoparticle Due to an Oscillating Dipole Using Discrete Dipole Approximation method

    Directory of Open Access Journals (Sweden)

    V. Fallahi

    2013-06-01

    Full Text Available In this paper, the interaction between an oscillating dipole moment and a Silver nanoparticle has been studied. Our calculations are based on Mie scattering theory and discrete dipole approximation(DDA method.At first, the resonance frequency due to excitingthe localized surface plasmons has been obtained using Mie scattering theory and then by exciting a dipole moment in theclose proximity of the nanoparticle, the induced charge distribution on the nanoparticle surface has been calculated. In our calculations, we have exploited the experimental data obtained by Johnson and Christy for dielectric function.

  6. Deterioration of gait and balance over time

    DEFF Research Database (Denmark)

    Kreisel, Stefan H; Blahak, Christian; Bäzner, Hansjörg

    2013-01-01

    Cross-sectional studies have shown an association between the severity of age-related white matter change (ARWMC) and lower body motor function. However, the association between prevalent ARWMC and incident deterioration of balance and gait remains insufficiently investigated. This study investig......Cross-sectional studies have shown an association between the severity of age-related white matter change (ARWMC) and lower body motor function. However, the association between prevalent ARWMC and incident deterioration of balance and gait remains insufficiently investigated. This study...... relevance: given the increasing use of neuroimaging, incidental white matter pathology is common; being able to delineate natural trajectories of balance and gait function given ARWMC may improve patient advice and help optimize allocation of care....

  7. The connection of hydronephrosis and microcirculation deterioration

    Directory of Open Access Journals (Sweden)

    Vorobets Dmytro

    2016-09-01

    Full Text Available In this study, we have analyzed the influence of hydronephrosis upon the microcirculation system, in situations of pyeloureteral junction obstruction. Herein, bulbar conjunctiva has been chosen as the object of this biomicroscopic study because of its simplicity and the method availability in clinic practice. In fulfilling this work, we ascertained the connections between extravascular, intravascular, vascular and general conjunctival indices of the patients before radical and paliatic correction of the pyeloureteral junction obstruction (i.e. by open and laparoscopic pyeloplasty, endopyelotomy, laser resection and balloon dilatation. We concluded that, apart from the proved deterioration of kidney function, systemic deteriorations of microcirculation may be observed in situations of clinically marked hydronephrosis, according to the results of radioisotope renography and excretory urography.

  8. Tree mineral nutrition is deteriorating in Europe

    DEFF Research Database (Denmark)

    Jonard, Mathieu; Fürst, Alfred; Verstraeten, Arne

    2015-01-01

    The response of forest ecosystems to increased atmospheric CO2 is constrained by nutrient availability. It is thus crucial to account for nutrient limitation when studying the forest response to climate change. The objectives of this study were to describe the nutritional status of the main...... that were observed in foliar nutrient concentrations, 20 were decreasing and two were increasing. Some of these trends were alarming, among which the foliar P concentration in F. sylvatica, Q. Petraea and P. sylvestris that significantly deteriorated during 1992–2009. In Q. Petraea and P. sylvestris...... to higher nutrient demand by trees. As the soil nutrient supply was not always sufficient to meet the demands of faster growing trees, this could partly explain the deterioration of tree mineral nutrition. The results suggest that when evaluating forest carbon storage capacity and when planning to reduce CO...

  9. Thermal noise due to surface-charge effects within the Debye layer of endogenous structures in dendrites

    Science.gov (United States)

    Poznanski, Roman R.

    2010-02-01

    An assumption commonly used in cable theory is revised by taking into account electrical amplification due to intracellular capacitive effects in passive dendritic cables. A generalized cable equation for a cylindrical volume representation of a dendritic segment is derived from Maxwell’s equations under assumptions: (i) the electric-field polarization is restricted longitudinally along the cable length; (ii) extracellular isopotentiality; (iii) quasielectrostatic conditions; and (iv) homogeneous medium with constant conductivity and permittivity. The generalized cable equation is identical to Barenblatt’s equation arising in the theory of infiltration in fissured strata with a known analytical solution expressed in terms of a definite integral involving a modified Bessel function and the solution to a linear one-dimensional classical cable equation. Its solution is used to determine the impact of thermal noise on voltage attenuation with distance at any particular time. A regular perturbation expansion for the membrane potential about the linear one-dimensional classical cable equation solution is derived in terms of a Green’s function in order to describe the dynamics of free charge within the Debye layer of endogenous structures in passive dendritic cables. The asymptotic value of the first perturbative term is explicitly evaluated for small values of time to predict how the slowly fluctuating (in submillisecond range) electric field attributed to intracellular capacitive effects alters the amplitude of the membrane potential. It was found that capacitive effects are almost negligible for cables with electrotonic lengths L>0.5 , contributes up to 10% of the signal for cables with electrotonic lengths in the range between 0.25due

  10. Thermal noise due to surface-charge effects within the Debye layer of endogenous structures in dendrites.

    Science.gov (United States)

    Poznanski, Roman R

    2010-02-01

    An assumption commonly used in cable theory is revised by taking into account electrical amplification due to intracellular capacitive effects in passive dendritic cables. A generalized cable equation for a cylindrical volume representation of a dendritic segment is derived from Maxwell's equations under assumptions: (i) the electric-field polarization is restricted longitudinally along the cable length; (ii) extracellular isopotentiality; (iii) quasielectrostatic conditions; and (iv) homogeneous medium with constant conductivity and permittivity. The generalized cable equation is identical to Barenblatt's equation arising in the theory of infiltration in fissured strata with a known analytical solution expressed in terms of a definite integral involving a modified Bessel function and the solution to a linear one-dimensional classical cable equation. Its solution is used to determine the impact of thermal noise on voltage attenuation with distance at any particular time. A regular perturbation expansion for the membrane potential about the linear one-dimensional classical cable equation solution is derived in terms of a Green's function in order to describe the dynamics of free charge within the Debye layer of endogenous structures in passive dendritic cables. The asymptotic value of the first perturbative term is explicitly evaluated for small values of time to predict how the slowly fluctuating (in submillisecond range) electric field attributed to intracellular capacitive effects alters the amplitude of the membrane potential. It was found that capacitive effects are almost negligible for cables with electrotonic lengths L>0.5 , contributes up to 10% of the signal for cables with electrotonic lengths in the range between 0.25thermal noise due to intracellular capacitive effects. The presence of significant thermal noise weakens the assumption of intracellular isopotentiality when approximating dendrites with compartments.

  11. A new deteriorated energy-momentum tensor

    International Nuclear Information System (INIS)

    Duff, M.J.

    1982-01-01

    The stress-tensor of a scalar field theory is not unique because of the possibility of adding an 'improvement term'. In supersymmetric field theories the stress-tensor will appear in a super-current multiplet along with the sypersymmetry current. The general question of the supercurrent multiplet for arbitrary deteriorated stress tensors and their relationship to supercurrent multiplets for models with gauge antisymmetric tensors is answered for various models of N = 1, 2 and 4 supersymmetry. (U.K.)

  12. Deterioration and fermentability of energy cane juice

    Directory of Open Access Journals (Sweden)

    Sandra Regina Ceccato-Antonini

    Full Text Available ABSTRACT: The main interest in the energy cane is the bioenergy production from the bagasse. The juice obtained after the cane milling may constitute a feedstock for the first-generation ethanol units; however, little attention has been dedicated to this issue. In order to verify the feasibility of the energy cane juice as substrate for ethanol production, the objectives of this research were first to determine the microbiological characteristics and deterioration along the time of the juices from two clones of energy cane (Type I and second, their fermentability as feedstock for utilization in ethanol distilleries. There was a clear differentiation in the bacterial and yeast development of the sugarcane juices assayed, being much faster in the energy canes than in sugarcane. The storage of juice for 8 hours at 30oC did not cause impact in alcoholic fermentation for any sample analyzed, although a significant bacterial growth was detected in this period. A decrease of approximately seven percentage points in the fermentative efficiency was observed for energy cane juice in relation to sugarcane in a 24-hour fermentation cycle with the baking yeast. Despite the faster deterioration, the present research demonstrated that the energy cane juice has potential to be used as feedstock in ethanol-producing industries. As far as we know, it is the first research to deal with the characteristics of deterioration and fermentability of energy cane juices.

  13. Zonal surface wind jets across the Red Sea due to mountain gap forcing along both sides of the Red Sea

    KAUST Repository

    Jiang, Houshuo

    2009-01-01

    [1] Mesoscale atmospheric modeling over the Red Sea, validated by in-situ meteorological buoy data, identifies two types of coastal mountain gap wind jets that frequently blow across the longitudinal axis of the Red Sea: (1) an eastward-blowing summer daily wind jet originating from the Tokar Gap on the Sudanese Red Sea coast, and (2) wintertime westward-blowing wind-jet bands along the northwestern Saudi Arabian coast, which occur every 10-20 days and can last for several days when occurring. Both wind jets can attain wind speeds over 15 m s-1 and contribute significantly to monthly mean surface wind stress, especially in the cross-axis components, which could be of importance to ocean eddy formation in the Red Sea. The wintertime wind jets can cause significant evaporation and ocean heat loss along the northeastern Red Sea coast and may potentially drive deep convection in that region. An initial characterization of these wind jets is presented. Copyright 2009 by the American Geophysical Union.

  14. Loss of ecosystem services due to chronic pollution of forests and surface waters in the Adirondack region (USA)

    Science.gov (United States)

    Beier, Colin M.; Caputo, Jesse; Lawrence, Gregory B.; Sullivan, Timothy J.

    2017-01-01

    Sustaining recent progress in mitigating acid pollution could require lower emissions caps that will give rise to real or perceived tradeoffs between healthy ecosystems and inexpensive energy. Because most impacts of acid rain affect ecosystem functions that are poorly understood by policy-makers and the public, an ecosystem services (ES) framework can help to measure how pollution affects human well-being. Focused on the Adirondack region (USA), a global ‘hot-spot’ of acid pollution, we measured how the chronic acidification of the region's forests, lakes, and streams has affected the potential economic and cultural benefits they provide to society. We estimated that acid-impaired hardwood forests provide roughly half of the potential benefits of forests on moderate to well-buffered soils – an estimated loss of ∼ $10,000 ha−1 in net present value of wood products, maple syrup, carbon sequestration, and visual quality. Acidic deposition has had only nominal impact – relative to the effects of surficial geology and till depth – on the capacity of Adirondack lakes and streams to provide water suitable for drinking. However, as pH declines in lakes, the estimated value of recreational fishing decreases significantly due to loss of desirable fish such as trout. Hatchery stocking programs have partially offset the pollution-mediated losses of fishery value, most effectively in the pH range 4.8–5.5, but are costly and limited in scope. Although any estimates of the monetary ‘damages’ of acid rain have significant uncertainties, our findings highlight some of the more tangible economic and cultural benefits of pollution mitigation efforts, which continue to face litigation and political opposition.

  15. Loss of ecosystem services due to chronic pollution of forests and surface waters in the Adirondack region (USA).

    Science.gov (United States)

    Beier, Colin M; Caputo, Jesse; Lawrence, Gregory B; Sullivan, Timothy J

    2017-04-15

    Sustaining recent progress in mitigating acid pollution could require lower emissions caps that will give rise to real or perceived tradeoffs between healthy ecosystems and inexpensive energy. Because most impacts of acid rain affect ecosystem functions that are poorly understood by policy-makers and the public, an ecosystem services (ES) framework can help to measure how pollution affects human well-being. Focused on the Adirondack region (USA), a global 'hot-spot' of acid pollution, we measured how the chronic acidification of the region's forests, lakes, and streams has affected the potential economic and cultural benefits they provide to society. We estimated that acid-impaired hardwood forests provide roughly half of the potential benefits of forests on moderate to well-buffered soils - an estimated loss of ∼ $10,000 ha -1 in net present value of wood products, maple syrup, carbon sequestration, and visual quality. Acidic deposition has had only nominal impact - relative to the effects of surficial geology and till depth - on the capacity of Adirondack lakes and streams to provide water suitable for drinking. However, as pH declines in lakes, the estimated value of recreational fishing decreases significantly due to loss of desirable fish such as trout. Hatchery stocking programs have partially offset the pollution-mediated losses of fishery value, most effectively in the pH range 4.8-5.5, but are costly and limited in scope. Although any estimates of the monetary 'damages' of acid rain have significant uncertainties, our findings highlight some of the more tangible economic and cultural benefits of pollution mitigation efforts, which continue to face litigation and political opposition. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  16. Deterioration of J-bar reinforcement in abutments and piers.

    Science.gov (United States)

    2011-12-31

    Deterioration and necking of J-bars has been reportedly observed at the interface of the footing and stem wall during the demolition : of older retaining walls and bridge abutments. Similar deterioration has been reportedly observed between the pier ...

  17. Investigation of mechanistic deterioration modeling for bridge design and management.

    Science.gov (United States)

    2017-04-01

    The ongoing deterioration of highway bridges in Colorado dictates that an effective method for allocating limited management resources be developed. In order to predict bridge deterioration in advance, mechanistic models that analyze the physical pro...

  18. Characterization and mediation of microbial deterioration of concrete bridge structures.

    Science.gov (United States)

    2013-04-01

    Samples obtained from deteriorated bridge structures in Texas were cultured in growth medium containing thiosulfate as an energy source and investigated for acid production, type of acid produced by microbes and the bio-deterioration of concrete cyli...

  19. Bridge deterioration models to support Indiana's bridge management system.

    Science.gov (United States)

    2016-02-01

    An effective bridge management system that is equipped with reliable deterioration models enables agency engineers to carry out : monitoring and long-term programming of bridge repair actions. At the project level, deterioration models help the agenc...

  20. 40 CFR 52.2497 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2497 Section 52.2497 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  1. 40 CFR 52.499 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.499 Section 52.499 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  2. 40 CFR 52.1929 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1929 Section 52.1929 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) Regulation for preventing significant deterioration of air... preventing significant deterioration of air quality. [56 FR 5656, Feb. 12, 1991, as amended at 68 FR 11324...

  3. 40 CFR 52.2676 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2676 Section 52.2676 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  4. 40 CFR 52.2779 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2779 Section 52.2779 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  5. 40 CFR 52.1689 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1689 Section 52.1689 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  6. 40 CFR 52.1165 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1165 Section 52.1165 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulation for preventing significant deterioration of air quality. The...

  7. 40 CFR 52.1603 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1603 Section 52.1603 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  8. 40 CFR 52.2528 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2528 Section 52.2528 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of Sections 160 through 165 of the Clean Air... Quality Deterioration. (b) Regulations for Preventing Significant Deterioration of Air Quality, the...

  9. 40 CFR 52.2451 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2451 Section 52.2451 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... Quality Deterioration. (b) Regulations for preventing significant deterioration of air quality. The...

  10. 40 CFR 52.2827 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2827 Section 52.2827 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  11. 40 CFR 52.1180 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1180 Section 52.1180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  12. 40 CFR 52.530 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.530 Section 52.530 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) EPA approves the Florida Prevention of Significant Deterioration program, as...

  13. 40 CFR 52.1234 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1234 Section 52.1234 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  14. 40 CFR 52.2729 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2729 Section 52.2729 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  15. 40 CFR 52.1884 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1884 Section 52.1884 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

  16. Application of Chemical Kinetics to Deterioration of Foods.

    Science.gov (United States)

    Labuza, T. P.

    1984-01-01

    Possible modes of food deterioration (such as microbial decay, nonenzymatic browning, senescence, lipid oxidation) are reviewed. A basic mathematical approach to the kinetics of food deterioration, kinetic approach to accelerating shelf-life deterioration, and shelf-life predictions are discussed. (JN)

  17. Tardily accelerated neurologic deterioration in two-step thallium intoxication.

    Science.gov (United States)

    Kuroda, Hiroshi; Mukai, Yoshiyuki; Nishiyama, Shuhei; Takeshita, Takayuki; Tateyama, Maki; Takeda, Atsushi; Aoki, Masashi

    2016-12-01

    Thallium intoxication was reported in cases with accidental ingestion, suicide attempt, and criminal adulteration. Reported cases were mostly one-time ingestion, therefore, the clinical course of divisional ingestion has not been fully known. Here, we report a case with two-step thallium intoxication manifesting as tardily accelerated neurologic deterioration. A 16-year-old adolescent was cryptically poisoned with thallium sulfate twice at an interval of 52days. After the first ingestion, neurologic symptoms including visual loss, myalgia, and weakness in legs developed about 40days after the development of acute gastrointestinal symptoms and alopecia. After the second ingestion, neurologic symptoms deteriorated rapidly and severely without gastrointestinal or cutaneous symptoms. Brain magnetic resonance imaging exhibited bilateral optic nerve atrophy. Nerve conduction studies revealed severe peripheral neuropathies in legs. Thallium intoxication was confirmed by an increase in urine thallium egestion. Most of the neurologic manifestations ameliorated in two years, but the visual loss persisted. The source of thallium ingestion was unraveled afterward because a murder suspect in another homicidal assault confessed the forepast adulteration. This discriminating clinical course may be attributable to the cumulative neurotoxicity due to the longer washout-time of thallium in the nervous system than other organs. It is noteworthy that the divisional thallium intoxication may manifest as progressive optic and peripheral neuropathy without gastrointestinal or cutaneous symptoms. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Early warnings of heart rate deterioration.

    Science.gov (United States)

    Almeida, Vania G; Nabney, Ian T

    2016-08-01

    Hospitals can experience difficulty in detecting and responding to early signs of patient deterioration leading to late intensive care referrals, excess mortality and morbidity, and increased hospital costs. Our study aims to explore potential indicators of physiological deterioration by the analysis of vital-signs. The dataset used comprises heart rate (HR) measurements from MIMIC II waveform database, taken from six patients admitted to the Intensive Care Unit (ICU) and diagnosed with severe sepsis. Different indicators were considered: 1) generic early warning indicators used in ecosystems analysis (autocorrelation at-1-lag (ACF1), standard deviation (SD), skewness, kurtosis and heteroskedasticity) and 2) entropy analysis (kernel entropy and multi scale entropy). Our preliminary findings suggest that when a critical transition is approaching, the equilibrium state changes what is visible in the ACF1 and SD values, but also by the analysis of the entropy. Entropy allows to characterize the complexity of the time series during the hospital stay and can be used as an indicator of regime shifts in a patient's condition. One of the main problems is its dependency of the scale used. Our results demonstrate that different entropy scales should be used depending of the level of entropy verified.

  19. NUMERICAL DESCRIPTION OF THE GROUNDWATER LEVELS CHANGE DUE TO THE RE- AND DISCHARGE OF THE ADJACENT SURFACE WATER BODIES – PROBLEMS AND CASE STUDIES

    Directory of Open Access Journals (Sweden)

    G. Trendafilov

    2012-03-01

    Full Text Available Numerical description of the groundwater levels change due to the re- and discharge of the adjacent surface water bodies – problems and case studies. The water exchange between the surface water bodies (rivers, lakes, seas, dams, etc. and adjacent water-bearing beds is possible if a hydraulic connection between them exists. The change of the levels of the first ones causes corresponding changes of the levels of the aquifers in the surrounding territories and vice versa. In many cases this interaction is the primary mechanism determining the groundwater regime. The aim of the present study is to examine the applicability of the most general possible analytical approach for quantitative description of the phenomena in the case of short-term changes with a significant magnitude (high waves of the level of the river of Maritsa in Plovdiv, Bulgaria. The study is performed through numerical simulations/calculations, with especially composed by the authors for this work computational programs.

  20. Mobile load simulators - A tool to distinguish between the emissions due to abrasion and resuspension of PM10 from road surfaces

    Science.gov (United States)

    Gehrig, R.; Zeyer, K.; Bukowiecki, N.; Lienemann, P.; Poulikakos, L. D.; Furger, M.; Buchmann, B.

    2010-12-01

    Mechanically produced abrasion particles and resuspension processes are responsible for a significant part of the PM10 emissions of road traffic. However, specific differentiation between PM10 emissions due to abrasion and resuspension from road pavement is very difficult due to their similar elemental composition and highly correlated variation in time. In this work Mobile Load Simulators were used to estimate PM10 emission factors for pavement abrasion and resuspension on different pavement types for light and heavy duty vehicles. From the experiments it was derived that particle emissions due to abrasion from pavements in good condition are quite low in the range of only a few mg·km -1 per vehicle if quantifiable at all. Considerable abrasion emissions, however, can occur from damaged pavements. Resuspension of deposited dust can cause high and extremely variable particle emissions depending strongly on the dirt load of the road surface. Porous pavements seem to retain deposited dust better than dense pavements, thus leading to lower emissions due to resuspension compared to pavements with a dense structure (e.g. asphalt concrete). Tyre wear seemed not to be a quantitatively significant source of PM10 emissions from road traffic.

  1. Drought-induced xylem cavitation and hydraulic deterioration: risk factors for urban trees under climate change?

    Science.gov (United States)

    Savi, Tadeja; Bertuzzi, Stefano; Branca, Salvatore; Tretiach, Mauro; Nardini, Andrea

    2015-02-01

    Urban trees help towns to cope with climate warming by cooling both air and surfaces. The challenges imposed by the urban environment, with special reference to low water availability due to the presence of extensive pavements, result in high rates of mortality of street trees, that can be increased by climatic extremes. We investigated the water relations and xylem hydraulic safety/efficiency of Quercus ilex trees growing at urban sites with different percentages of surrounding impervious pavements. Seasonal changes of plant water potential and gas exchange, vulnerability to cavitation and embolism level, and morpho-anatomical traits were measured. We found patterns of increasing water stress and vulnerability to drought at increasing percentages of impervious pavement cover, with a consequent reduction in gas exchange rates, decreased safety margins toward embolism development, and increased vulnerability to cavitation, suggesting the occurrence of stress-induced hydraulic deterioration. The amount of impermeable surface and chronic exposure to water stress influence the site-specific risk of drought-induced dieback of urban trees under extreme drought. Besides providing directions for management of green spaces in towns, our data suggest that xylem hydraulics is key to a full understanding of the responses of urban trees to global change. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

  2. Investigation of L-leucine in reducing the moisture-induced deterioration of spray-dried salbutamol sulfate power for inhalation.

    Science.gov (United States)

    Li, Liang; Leung, Sharon Shui Yee; Gengenbach, Thomas; Yu, Jiaqi; Gao, Ge Fiona; Tang, Patricia; Zhou, Qi Tony; Chan, Hak-Kim

    2017-09-15

    The aim of this study was to investigate the ability of L-leucine (LL) in preventing moisture-induced deterioration in the in vitro aerosolization performance of spray-dried (SD) salbutamol sulfate (SS). Increasing mass fraction of LL (5-80%) were co-spray dried with SS, and the physicochemical properties of the powders were characterized by laser diffraction, X-ray powder diffraction (XRD) and dynamic vapour sorption (DVS). Furthermore, the surface morphology and chemistry of fine particles was analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The in vitro aerosolization performance of powders stored at different relative humidity (RH) was evaluated by a next generation impactor (NGI). The SD SS powders were moderately hygroscopic and amorphous, of which the uptake of moisture upon storage caused a drop in the aerosolization performance. The results showed that 40% (w/w) LL was sufficient to eliminate the effect of moisture on the aerosolization performance at 60% RH. The formulation containing 40% (w/w) LL also maximized the aerosolization performance of SD SS powders (stored in desiccator) with the emitted fraction being 90.0±1.8%, and the fine particle fraction based on the recovered dose (FPF recovered ) and emitted dose (FPF emitted ) being 78.0±3.7% and 86.6±2.9%, respectively. The underlying mechanisms were that the crystalline LL increased the degree of particle surface corrugation, and reduced particle fusion and cohesiveness to facilitate dispersion. However, there is still a great challenge to prevent the moisture-induced deterioration in the aerosolization performance at 75% RH due to the recrystallization of SD SS. In conclusion, LL is a potential excipient for reducing moisture-induced deterioration in the aerosolization performance of SD amorphous powders, but still has drawbacks in preventing the recrystallization-induced deterioration. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Damage Detection and Deteriorating Structural Systems

    DEFF Research Database (Denmark)

    Long, Lijia; Thöns, Sebastian; Döhler, Michael

    2017-01-01

    This paper addresses the quantification of the value of damage detection system and algorithm information on the basis of Value of Information (VoI) analysis to enhance the benefit of damage detection information by providing the basis for its optimization before it is performed and implemented....... The approach of the quantification the value of damage detection information builds upon the Bayesian decision theory facilitating the utilization of damage detection performance models, which describe the information and its precision on structural system level, facilitating actions to ensure the structural...... integrity and facilitating to describe the structural system performance and its functionality throughout the service life. The structural system performance is described with its functionality, its deterioration and its behavior under extreme loading. The structural system reliability given the damage...

  4. Optimal Control Inventory Stochastic With Production Deteriorating

    Science.gov (United States)

    Affandi, Pardi

    2018-01-01

    In this paper, we are using optimal control approach to determine the optimal rate in production. Most of the inventory production models deal with a single item. First build the mathematical models inventory stochastic, in this model we also assume that the items are in the same store. The mathematical model of the problem inventory can be deterministic and stochastic models. In this research will be discussed how to model the stochastic as well as how to solve the inventory model using optimal control techniques. The main tool in the study problems for the necessary optimality conditions in the form of the Pontryagin maximum principle involves the Hamilton function. So we can have the optimal production rate in a production inventory system where items are subject deterioration.

  5. Capacitive sensor for engine oil deterioration measurement

    Science.gov (United States)

    Shinde, Harish; Bewoor, Anand

    2018-04-01

    A simple system or mechanism for engine Oil (lubricating oil) deterioration monitoring is a need. As engine oil is an important element in I C engines and it is exposed to various strains depending on the operating conditions. If it becomes contaminated with dirt and metal particles, it can become too thick or thin and loses its protective properties, leads to unwanted friction. In turn, to avoid an engine failure, the oil must be changed before it loses its protective properties, which may be harmful to engine which deteriorates vehicle performance. At the same time, changing the lubricant too early, cause inefficient use of already depleting resources, also unwanted impact on the environment and economic reasons. Hence, it will be always helpful to know the quality of the oil under use. With this objective, the research work had been undertaken to develop a simple capacitance sensor for quantification of the quality of oil under use. One of the investigated parameter to quantify oil degradation is Viscosity (as per standard testing procedure: DIN 51562-1). In this research work, an alternative method proposed which analyzing change in capacitance of oil, to quantify the quality of oil underuse and compared to a conventional standard method. The experimental results reported in this paper shows trend for the same. Engine oil of grade SAE 15W40 used for light-duty vehicle, vans and passenger cars is used for experimentation. Suggested method can form a base for further research to develop a cost-effective method for indicating the time to change in engine oil quality have been presented.

  6. Tree mineral nutrition is deteriorating in Europe.

    Science.gov (United States)

    Jonard, Mathieu; Fürst, Alfred; Verstraeten, Arne; Thimonier, Anne; Timmermann, Volkmar; Potočić, Nenad; Waldner, Peter; Benham, Sue; Hansen, Karin; Merilä, Päivi; Ponette, Quentin; de la Cruz, Ana C; Roskams, Peter; Nicolas, Manuel; Croisé, Luc; Ingerslev, Morten; Matteucci, Giorgio; Decinti, Bruno; Bascietto, Marco; Rautio, Pasi

    2015-01-01

    The response of forest ecosystems to increased atmospheric CO2 is constrained by nutrient availability. It is thus crucial to account for nutrient limitation when studying the forest response to climate change. The objectives of this study were to describe the nutritional status of the main European tree species, to identify growth-limiting nutrients and to assess changes in tree nutrition during the past two decades. We analysed the foliar nutrition data collected during 1992-2009 on the intensive forest monitoring plots of the ICP Forests programme. Of the 22 significant temporal trends that were observed in foliar nutrient concentrations, 20 were decreasing and two were increasing. Some of these trends were alarming, among which the foliar P concentration in F. sylvatica, Q. Petraea and P. sylvestris that significantly deteriorated during 1992-2009. In Q. Petraea and P. sylvestris, the decrease in foliar P concentration was more pronounced on plots with low foliar P status, meaning that trees with latent P deficiency could become deficient in the near future. Increased tree productivity, possibly resulting from high N deposition and from the global increase in atmospheric CO2, has led to higher nutrient demand by trees. As the soil nutrient supply was not always sufficient to meet the demands of faster growing trees, this could partly explain the deterioration of tree mineral nutrition. The results suggest that when evaluating forest carbon storage capacity and when planning to reduce CO2 emissions by increasing use of wood biomass for bioenergy, it is crucial that nutrient limitations for forest growth are considered. © 2014 John Wiley & Sons Ltd.

  7. An inventory model of instantaneous deteriorating items with controllable deterioration rate for time dependent demand and holding cost

    Directory of Open Access Journals (Sweden)

    Vinod Kumar Mishra

    2013-06-01

    Full Text Available Purpose: The purpose of this paper to develop an inventory model for instantaneous deteriorating items with the consideration of the facts that the deterioration rate can be controlled by using the preservation technology (PT and the holding cost & demand rate both are linear function of time which was treated as constant in most of the deteriorating inventory model. Design/methodology/approach: Developed the mathematical equation of deterministic deteriorating inventory model in which demand rate and holding cost both is linear function of time, deterioration rate is constant, backlogging rate is variable and depend on the length of the next replenishment, shortages are allowed and partially backlogged and obtain an analytical solution which optimizes the total cost of the proposed inventory model. Findings: The model can be applied for optimizing the total inventory cost of deteriorating items inventory for such business enterprises where they use the preservation technology to control the deterioration rate under other assumptions of the model. Originality/value: The inventory system for deteriorating items has been an object of study for a long time, but little is known about the effect of investing in reducing the rate of product deterioration and their significant impact in the business. The proposed model is effective as well as efficient for the business organization that uses the preservation technology to reduce the deterioration rate of the instantaneous deteriorating items of the inventory.

  8. Research on Deterioration Mechanism of Concrete Materials in an Actual Structure

    Directory of Open Access Journals (Sweden)

    Shiping Zhang

    2014-01-01

    Full Text Available The cause for deterioration of the concrete structure located in severe environment has been explored both in field and in laboratory. Serious cracking and spalling appeared upon surface of the concrete structure soon after the structure was put into service. Both alkali-aggregate reaction and freeze-thaw cycles may result in similar macro visible cracking and spalling. The possibility of alkali-aggregate reaction was excluded by both field survey and lab examination such as chemical analysis, petrographic analysis, and determination of alkali reactivity of aggregates. According to results of freeze-thaw cycles, impermeability testing, and microstructure analysis, it is deduced that the severe environmental conditions plus the relatively inferior frost resistance cause the deterioration of concrete. Usage of air entraining admixture can improve frost resistance and impermeability. Furthermore, new approaches to mitigate the deterioration of concrete used in severe environmental condition are discussed.

  9. Mechanisms of deterioration of nutrients. [freeze drying methods for space flight food

    Science.gov (United States)

    Karel, M.; Flink, J. M.

    1974-01-01

    Methods are reported by which freeze dried foods of improved quality will be produced. The applicability of theories of flavor retention has been demonstrated for a number of food polymers, both proteins and polysacchardies. Studies on the formation of structures during freeze drying have been continued for emulsified systems. Deterioration of organoleptic quality of freeze dried foods due to high temperature heating has been evaluated and improved procedures developed. The influence of water activity and high temperature on retention of model flavor materials and browning deterioration has been evaluated for model systems and food materials.

  10. Identical parallel machine scheduling with nonlinear deterioration and multiple rate modifying activities

    Directory of Open Access Journals (Sweden)

    Ömer Öztürkoğlu

    2017-07-01

    Full Text Available This study focuses on identical parallel machine scheduling of jobs with deteriorating processing times and rate-modifying activities. We consider non linearly increasing processing times of jobs based on their position assignment. Rate modifying activities are also considered to recover the increase in processing times of jobs due to deterioration. We also propose heuristics algorithms that rely on ant colony optimization and simulated annealing algorithms to solve the problem with multiple RMAs in a reasonable amount of time. Finally, we show that ant colony optimization algorithm generates close optimal solutions and superior results than simulated annealing algorithm.

  11. Predictive maintenance policy for a gradually deteriorating system subject to stress

    International Nuclear Information System (INIS)

    Deloux, E.; Castanier, B.; Berenguer, C.

    2009-01-01

    This paper deals with a predictive maintenance policy for a continuously deteriorating system subject to stress. We consider a system with two failure mechanisms which are, respectively, due to an excessive deterioration level and a shock. To optimize the maintenance policy of the system, an approach combining statistical process control (SPC) and condition-based maintenance (CBM) is proposed. CBM policy is used to inspect and replace the system according to the observed deterioration level. SPC is used to monitor the stress covariate. In order to assess the performance of the proposed maintenance policy and to minimize the long-run expected maintenance cost per unit of time, a mathematical model for the maintained system cost is derived. Analysis based on numerical results are conducted to highlight the properties of the proposed maintenance policy in respect to the different maintenance parameters

  12. Effective Prevention of Oxidative Deterioration of Fish Oil: Focus on Flavor Deterioration.

    Science.gov (United States)

    Miyashita, Kazuo; Uemura, Mariko; Hosokawa, Masashi

    2018-03-25

    Docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), both abundant in fish oil, are known to have significant biochemical and physiological effects primarily linked to the improvement of human health, especially cardiovascular and brain health. However, the incorporation of fish oil into foods and beverages is often challenging, as fish oil is very easily oxidized and can cause undesirable flavors. This review discusses this rapid formation of the fishy and metallic off-flavors, focusing especially on an early stage of fish oil oxidation. Although oxidative stability and quality of commercialized fish oil have improved over the past few years, there is a still a problem with its application: Flavor deterioration can be found even at very low oxidation levels. This review also notes the effective way to inhibit the formation of the volatile compounds responsible for the flavor deterioration.

  13. Deterioration and conservation of plasticized poly (vinyl chloride) objects

    DEFF Research Database (Denmark)

    Shashoua, Yvonne

    2002-01-01

    Plasticized poly (vinyl chloride) (PVC) in museum collections deteriorates by migration, loss and chemical breakdown of the plasticizer, accompanied by dehydrochlorination of the polymer. The extent, rate and mechanisms of deterioration of new and deteriorated plasticized PVC were compared during...... of samples. Optical densitometry was used to quantify darkening of the PVC component of samples. Degradation of new and deteriorated PVC was inhibited by enclosing it in a non-adsorbent material, such as glass containing non-agitated air. Such storage inhibited migration and loss of DEHP....

  14. Differential Susceptibility of Bighorn Sheep (Ovis canadensis) and Domestic Sheep (Ovis aries) Neutrophils to Mannheimia haemolytica Leukotoxin is not due to Differential Expression of Cell Surface CD18.

    Science.gov (United States)

    Dassanayake, Rohana P; Shanthalingam, Sudarvili; Liu, Weiguo; Casas, Eduardo; Srikumaran, Subramaniam

    2017-07-01

    Bighornsheep ( Ovis canadensis ) are more susceptible to pneumonia caused by Mannheimia haemolytica than are domestic sheep ( Ovis aries ). Leukotoxin produced by M. haemolytica is the principal virulence factor involved in pneumonia pathogenesis. Although leukotoxin is cytolytic to all subsets of ruminant leukocytes, neutrophils are the most susceptible subset. Bighorn sheep neutrophils are four- to eightfold more susceptible to leukotoxin-induced cytolysis than are domestic sheep neutrophils. We hypothesized that the higher susceptibility of bighorn sheep neutrophils, in comparison to domestic sheep neutrophils, is due to higher expression of CD18, the receptor for leukotoxin on leukocytes. Our objective was to quantify CD18 expression on neutrophils of bighorn sheep and domestic sheep. Cell-surface CD18 expression on bighorn sheep and domestic sheep neutrophils was measured as antibody binding capacity of cells by flow cytometric analysis with two fluorochrome-conjugated anti-CD18 monoclonal antibodies (BAQ30A and HUH82A) and microspheres. Contrary to our expectations, CD18 expression was higher (Psheep neutrophils in comparison to bighorn sheep neutrophils. These findings suggest that the higher in vitro susceptibility to leukotoxin of bighorn sheep neutrophils compared to domestic sheep neutrophils is not due to higher expression of the leukotoxin receptor CD18 on bighorn sheep neutrophils.

  15. Numerical analysis of deteriorated sub-sea pipelines under environmental loads

    Science.gov (United States)

    Gücüyen, Engin

    2015-11-01

    The significant point is the bidirectional interaction technique in FSI analysis while investigating subsea corrosion effect. By this way, pipe environment is accurately modelled and fluid effects are also considered. The effect of external corrosion defects on structural behaviour of a pipeline is studied by creating a nonlinear numerical model based on the finite element method according to ABAQUS analysis program. Corrosion losses of sections are obtained from experimental results and applied to the model. Numerical model is formed by a span of sub-sea pipeline that is subjected to environmental loads. Seismic and wind-generated irregular wave loads are considered as environmental loads. Irregular wave is represented with equivalent eight regular waves via FFT. The pipe is modelled according to two different types which are non-corroded(intact) and corroded (deteriorated) to demonstrate corrosion effects on it. The visible type of corrosion in marine environment is named `pitting' corrosion, in which the material loss is locally interpenetrated over the surface. By considering this situation, the corroded and non-corroded pipes are modelled as 3D solid elements. The main point is revealing how the subsea corrosion affects the structural behaviour of pipelines on the basis of implementation of experimental results to a model structure due to changes of stresses and displacement.

  16. Effect of flood conditions on the deterioration of porous clay-based brick

    Science.gov (United States)

    Mol, L.; Tomor, A.

    2017-12-01

    Man-made materials represent an increasingly large proportion of geomaterials that are used to build up a rapidly expanding urbanised landscape. The deterioration of such materials is of increasing concern, in particular in light of the projected increase in storm and flood events and their associated high water levels. The effect of prolonged saturation in porous materials, man-made as well as natural, can lead to accelerated deterioration. This can be of particular concern for load-bearing structural materials, for example bridges. In this study, the effect of moisture movement has been investigated for brick masonry, as one of the most commonly used porous building materials. Saturation of brick masonry can be of particular concern for historical masonry, such as masonry arch bridges in conjunction with under increasing levels of long-term traffic loading. While flooding can lead to scour and sudden collapse of bridges, saturation can also lead to accelerated medium and long-term deterioration. A series of small-scale laboratory tests have been carried out on brick masonry to identify the effects of saturation on the material properties and changes in the rate of deterioration. Brick masonry prisms have been loaded to failure under quasi-static and long-term cyclic compression and monitored with the help of acoustic emission technique, accelerometers, linear variable differential transformers (LVDTs), permeametry and brick surface hardness measurements. Under quasi-static loading saturated samples showed significant reduction in the load capacity and increased fracture development. Under fatigue loading the number of cycles to failure reduced significantly for saturated specimens and characteristic changes in material parameters have been related to stages of fatigue deterioration. Test results indicated that increasing flood events can accelerate moisture-related deterioration in porous brick masonry.

  17. 40 CFR 52.432 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.432 Section 52.432 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulation for preventing significant deterioration of air quality. The provisions of...

  18. 40 CFR 52.1436 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1436 Section 52.1436 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The requirements of sections 160 through 165 of the Clean Air Act...

  19. 40 CFR 52.270 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.270 Section 52.270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) With the exception of the areas listed in paragraph (b) of this section: (1... plan does not include approvable procedures for preventing the significant deterioration of air quality...

  20. 40 CFR 52.1029 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1029 Section 52.1029 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The program to review operation and construction of new and modified...

  1. 40 CFR 52.683 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... the Clean Air Act for preventing significant deterioration of air quality. (b) The requirements of...

  2. 40 CFR 52.1116 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1116 Section 52.1116 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) The following provisions of 40 CFR 52.21 are hereby incorporated and made a...

  3. 40 CFR 52.1485 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1485 Section 52.1485 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... include approvable procedures for preventing the significant deterioration of air quality. (b) Regulation...

  4. 40 CFR 52.632 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.632 Section 52.632 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

  5. 40 CFR 52.2581 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2581 Section 52.2581 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(c) [Reserved] (d) The requirements of sections 160 through 165... provisions for prevention of significant deterioration of air quality at 40 CFR 52.21 are applicable to the...

  6. 40 CFR 52.793 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.793 Section 52.793 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

  7. 40 CFR 52.581 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.581 Section 52.581 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) All applications and other information required pursuant to § 52.21 of this...

  8. 40 CFR 52.2346 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2346 Section 52.2346 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Utah plan, as submitted, is approved as meeting the... construct on Indian Reservations. (b) Regulation for prevention of significant deterioration of air quality...

  9. 40 CFR 52.833 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.833 Section 52.833 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are met... for preventing significant deterioration of air quality. The provisions of § 52.21 except paragraph (a...

  10. 40 CFR 52.1529 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1529 Section 52.1529 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. New Hampshire's Part Env-A 623, “Requirements for Prevention of...

  11. 40 CFR 52.2131 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2131 Section 52.2131 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(b) [Reserved] (c) All applications and other information...

  12. 40 CFR 52.738 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.738 Section 52.738 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

  13. 40 CFR 52.181 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.181 Section 52.181 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The plan submitted by the Governor of Arkansas as follows: (1) April 23, 1981...

  14. 40 CFR 52.2178 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2178 Section 52.2178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The South Dakota plan, as submitted, is approved as meeting the... on Indian reservations; (b) Regulations for preventing significant deterioration of air quality. The...

  15. 40 CFR 52.1987 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1987 Section 52.1987 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Oregon Department of Environmental Quality rules for the prevention of significant deterioration of air quality (provisions of OAR chapter 340, Divisions 200, 202...

  16. 40 CFR 52.1280 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1280 Section 52.1280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) All applications and other information required pursuant to § 52...

  17. 40 CFR 52.2380 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2380 Section 52.2380 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The program to review the construction and operation of new and...

  18. 40 CFR 52.931 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.931 Section 52.931 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) Regulations for preventing significant deterioration of air quality. The..., the Kentucky Division for Air Quality has determined that the application complies with the applicable...

  19. 40 CFR 52.2083 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2083 Section 52.2083 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Rhode Island plan, as submitted, is approved as meeting the...

  20. 40 CFR 52.343 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.343 Section 52.343 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met for the following categories of sources for preventing the significant deterioration of air quality...

  1. 40 CFR 52.96 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.96 Section 52.96 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Alaska Department of Environmental Conservation Air Quality... deterioration of air quality. (b) The requirements of sections 160 through 165 of the Clean Air Act are not met...

  2. 40 CFR 52.2303 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.2303 Section 52.2303 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The plan submitted by Texas is approved as meeting the requirements of part C, Clean Air Act for preventing significant deterioration of air quality. The plan...

  3. 40 CFR 52.986 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.986 Section 52.986 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The plan submitted by the Governor of Louisiana on August 14, 1984 (as adopted... preventing significant deterioration of air quality. (b) The requirements of sections 160 through 165 of the...

  4. 40 CFR 52.382 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.382 Section 52.382 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met...

  5. 40 CFR 52.884 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.884 Section 52.884 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of section 160 through 165 of the Clean Air Act, as amended...

  6. 40 CFR 52.144 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.144 Section 52.144 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Act are not met... lands does not include approvable procedures for preventing the significant deterioration of air quality...

  7. Concern With Environmental Deterioration and Attitudes Toward Population Limitation

    Science.gov (United States)

    Barnett, Larry D.

    1970-01-01

    Analysis of Gallup Poll data of Junuary 1969 reveals weak association between concern about environmental deterioration and the recognition of need for eventual limitation of human population. Suggests that to increase favorable attitudes to population control, role of overpopulation in causing environmental deterioration needs to be presented to…

  8. microbial deterioration studies of military cotton and leather based ...

    African Journals Online (AJOL)

    BSN

    Microbial deterioration studies on selected cotton based uniforms were carried out using test-fungi earlier isolated from the uniforms stored in the Military Warehouses. These fungi includes, Aspergillus nigar, A. fumigatus, C. gwbosum, C. thermophile, Var. coprohile, B. stolonifer and S. pulveru/entum. The deteriorative ...

  9. Microbial deterioration studies of military cotton and leather based ...

    African Journals Online (AJOL)

    Microbial deterioration studies on selected cotton based uniforms were carried out using test-fungi earlier isolated from the uniforms stored in the Military Warehouses. These fungi includes, Aspergillus nigar, A. fumigatus, C. gwbosum, C. thermophile, Var.coprohile, B. stolonifer and S. pulverulentum. The deteriorative ...

  10. Acute functional deterioration in a child with cerebral palsy.

    LENUS (Irish Health Repository)

    Smyth, Elizabeth

    2012-01-01

    We describe a case of acute functional deterioration in a 13-year-old girl with severe spastic diplegia (GMFCS III) and a new diagnosis of diffuse intrinsic pontine glioma (DIPG). She presented with acute deterioration in mobility and motor function over 1 month, which was associated with dysarthria, dysphagia and behavioural change. Her mother had noticed subtle functional deterioration over the 2 months prior to this. Her physiotherapist who was concerned about her acute functional deterioration referred her for emergency review. Neurological imaging revealed a diffuse pontine lesion consistent with DIPG. She was subsequently referred to oncology. She deteriorated further, clinically, over the next few days and following discussion with the team; her family opted for palliative treatment, given the poor prognosis associated with DIPG.

  11. A thin rivulet or ridge subject to a uniform transverse shear stress at its free surface due to an external airflow

    KAUST Repository

    Sullivan, J. M.

    2012-01-01

    We use the lubrication approximation to analyze three closely related problems involving a thin rivulet or ridge (i.e., a two-dimensional droplet) of fluid subject to a prescribed uniform transverse shear stress at its free surface due to an external airflow, namely a rivulet draining under gravity down a vertical substrate, a rivulet driven by a longitudinal shear stress at its free surface, and a ridge on a horizontal substrate, and find qualitatively similar behaviour for all three problems. We show that, in agreement with previous numerical studies, the free surface profile of an equilibrium rivulet/ridge with pinned contact lines is skewed as the shear stress is increased from zero, and that there is a maximum value of the shear stress beyond which no solution with prescribed semi-width is possible. In practice, one or both of the contact lines will de-pin before this maximum value of the shear stress is reached, and so we consider situations in which the rivulet/ridge de-pins at one or both contact lines. In the case of de-pinning only at the advancing contact line, the rivulet/ridge is flattened and widened as the shear stress is increased from its critical value, and there is a second maximum value of the shear stress beyond which no solution with a prescribed advancing contact angle is possible. In contrast, in the case of de-pinning only at the receding contact line, the rivulet/ridge is thickened and narrowed as the shear stress is increased from its critical value, and there is a solution with a prescribed receding contact angle for all values of the shear stress. In general, in the case of de-pinning at both contact lines there is a critical "yield" value of the shear stress beyond which no equilibrium solution is possible and the rivulet/ridge will evolve unsteadily. In the Appendix, we show that an equilibrium rivulet/ridge with prescribed flux/area is quasi-statically stable to two-dimensional perturbations. © 2012 American Institute of Physics.

  12. Bacterial adhesion and biofilm formation on surfaces of variable roughness and hydrophobicity

    DEFF Research Database (Denmark)

    Tang, Lone; Pillai, Saju; Iversen, Anders

    L.Biofilm formation on surfaces in food production and processing can deteriorate the quality of food products and be a hazard to consumers. The food industry currently uses a number of approaches to either remove biofilm or prevent its formation. Due to the inherent resilience of bacteria...

  13. Pravcice Rock Arch (Bohemian Switzerland National Park, Czech Republic) deterioration due to natural and anthropogenic weathering

    Czech Academy of Sciences Publication Activity Database

    Vařilová, Z.; Přikryl, R.; Cílek, Václav

    2011-01-01

    Roč. 63, 7/8 (2011), s. 1861-1878 ISSN 1866-6280 R&D Projects: GA ČR GA205/08/0676 Institutional research plan: CEZ:AV0Z30130516 Keywords : Upper Cretaceous sandstone * rock arch * Bohemian Cretaceous basin * weathering processes * mineralogy of efflorescence * water soluble salts chemistry Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.059, year: 2011

  14. Development of System for Evaluating Concrete Strength Deterioration Due to Radiation and Resultant Heat

    International Nuclear Information System (INIS)

    Maruyama, I.; Kontani, O.; Ishizawa, A.; Takizawa, M.; Sato, O.

    2012-01-01

    Evaluation of the soundness of concrete exposed to irradiation has been studied within the framework of a project of the Nuclear and Industrial Safety Agency (NISA) 'Japan Ageing Management Program for System Safety'. This contribution presents the background to the existing evaluation processes, a review of the irradiation exposure effect on concrete and needs for irradiation testing. Based on results of this study, working assumptions for the development of an evaluation system are derived, and an overall picture of a numerical model as well as a framework for evaluating concrete soundness under irradiated conditions are proposed. (author)

  15. Monitoring the Deterioration of Stone at Mindener MUSEUM'S Lapidarium

    Science.gov (United States)

    Pomaska, G.

    2013-07-01

    Mindener Museum's Lapidarium incorporates a collection of stone work like reliefs, sculptures and inscriptions from different time epochs as advices of the city's history. These gems must be protected against environmental influences and deterioration. In advance of the measures a 3D reconstruction and detailed documentation has to be taken. The framework to establish hard- and software must match the museum's infrastructure. Two major question will be answered. Are low-cost scanning devices like depth cameras and digital of the shelf cameras suitable for the data acquisition? Does the functionality of open source and freeware covers the demand on investigation and analysis in this application? The working chain described in this contribution covers the structure from motion method and the reconstruction with RGB-D cameras. Mesh processing such as cleaning, smoothing, poisson surface reconstruction and texturing will be accomplished with MeshLab. Data acquisition and modelling continues in structure analysis. Therefore the focus lies as well on latest software developments related to 3D printing technologies. Repairing and finishing of meshes is a task for MeshMixer. Netfabb as a tool for positioning, dimensioning and slicing enables virtual handling of the items. On the Sketchfab web site one can publish and share 3D objects with integration into web pages supported by WebGL. Finally if a prototype is needed, the mesh can be uploaded to a 3D printing device provided by an online service.

  16. MONITORING THE DETERIORATION OF STONE AT MINDENER MUSEUM'S LAPIDARIUM

    Directory of Open Access Journals (Sweden)

    G. Pomaska

    2013-07-01

    Full Text Available Mindener Museum's Lapidarium incorporates a collection of stone work like reliefs, sculptures and inscriptions from different time epochs as advices of the city's history. These gems must be protected against environmental influences and deterioration. In advance of the measures a 3D reconstruction and detailed documentation has to be taken. The framework to establish hard- and software must match the museum's infrastructure. Two major question will be answered. Are low-cost scanning devices like depth cameras and digital of the shelf cameras suitable for the data acquisition? Does the functionality of open source and freeware covers the demand on investigation and analysis in this application? The working chain described in this contribution covers the structure from motion method and the reconstruction with RGB-D cameras. Mesh processing such as cleaning, smoothing, poisson surface reconstruction and texturing will be accomplished with MeshLab. Data acquisition and modelling continues in structure analysis. Therefore the focus lies as well on latest software developments related to 3D printing technologies. Repairing and finishing of meshes is a task for MeshMixer. Netfabb as a tool for positioning, dimensioning and slicing enables virtual handling of the items. On the Sketchfab web site one can publish and share 3D objects with integration into web pages supported by WebGL. Finally if a prototype is needed, the mesh can be uploaded to a 3D printing device provided by an online service.

  17. Heritage stones and their deterioration in rock-cut monuments in India

    Science.gov (United States)

    Sharma, Vinod K.

    2017-04-01

    India is dotted with thousands of rock- cut monuments of considerable antiquity having artwork of global importance. It is evident from the location of many of these monuments that knowledge of viable selection of site, geotechnical considerations and amenability to sculptures' chisel was vital for construction of rock-cut monuments and sculptures. These rock-cut structures also represent significant achievements of geotechnical and structural engineering and craftsmanship of contemporary period. The paper deals with some of the sites where natural rock-mass exposures were used to hew the monuments and highlight the deterioration owing to geological and climatic conditions. The Kailash temple in Ellora and Ajanta rock-cut caves are among the greatest architectural feats which owe their grandeur to amenability and consistency of basalt of Deccan Volcanic Province from which it is hewn. The Kailash Temple was created through a single, huge top-down excavation 100 feet deep down into the volcanic basaltic cliff rock. These ancient rock cut structures are amazing achievements of structural engineering and craftsmanship. The lava flows are nearly horizontal, competent rock medium facilitated the chiseling for the sculptures. The deterioration of these basalts are seen where the amygdule, vesicles and opening in rock discontinuity had the medium of construction or excavation. The monolithic rock- cut monuments of Mahabalipuram temples are constructed in the form of rathas or chriot and adjoining caves by excavating solid charnockite/granites. The large rock exposures are excavated and cut to perfection with wall decorations and sculptured art. The charnockites are the strongest and the most durable rock, yet quite amenable to fine dressing. These monolithic monuments in charnockite and are cut out of the hillock. The 7th Century monuments now exhibit somewhat rough surface probably due to weathering effect of salt laden winds from the sea side and alteration of feldspars

  18. Reversal deterioration of renal function accompanied with primary hypothyrodism

    Directory of Open Access Journals (Sweden)

    Dragović Tamara

    2012-01-01

    Full Text Available Introduction. Hypothyroidism is often accompanied with decline of kidney function, or inability to maintain electrolyte balance. These changes are usually overlooked in everyday practice. Early recognition of this association eliminates unnecessary diagnostic procedures that postpone the adequate treatment. Case report. Two patients with elevated serum creatinine levels due to primary autoimmune hypothyroidism, with complete recovery of creatinine clearance after thyroid hormone substitution therapy are presented. The first patient was a young male whose laboratory tests suggested acute renal failure, and the delicate clinical presentation of reduced thyroid function. The second patient was an elderly woman with a history of a long-term signs and symptoms attributed to ageing, including the deterioration of renal function, with consequently delayed diagnosis of hypothyroidism. Conclusion. Serum thyrotropin and thyroxin levels measurement should be done in all cases of renal failure with undefined renal desease, even if the typical clinical presentation of hypothyroidism is absent. Thyroid hormone assays sholud also be performed in all patients with chronic kidney disease whose kidney function is rapidly worsening.

  19. Management of arthritis patients after functional deterioration

    NARCIS (Netherlands)

    Bulthuis, Y.

    2010-01-01

    Hospitalization in arthritis patients is indicated when the disease flares or when joint replacements are to be placed. Conservative treatment aims to control disease activity and to reduce pain. Joint replacement is indicated when pain or functional limitations due to a destroyed joint impair the

  20. Due diligence

    International Nuclear Information System (INIS)

    Sanghera, G.S.

    1999-01-01

    The Occupational Health and Safety (OHS) Act requires that every employer shall ensure the health and safety of workers in the workplace. Issues regarding the practices at workplaces and how they should reflect the standards of due diligence were discussed. Due diligence was described as being the need for employers to identify hazards in the workplace and to take active steps to prevent workers from potentially dangerous incidents. The paper discussed various aspects of due diligence including policy, training, procedures, measurement and enforcement. The consequences of contravening the OHS Act were also described

  1. Materials Deterioration in Tropic versus Conus Sites,

    Science.gov (United States)

    1980-06-01

    RADIATION COASTAL EXPOSURE SITE OCEAN SPRINGS, MS SUBTROPICAL MARINE CLIMATE, HIGH PREVIOUS SUMMER HEAT, HUMIDITY AND MANGROVE RAINFALL SITE RESULTS KEY...WEST, FL TROPICAL MARINE CLIMATE DURING FORT SHERMAN CERTAIN MONTHS COASTAL EXPO- SURE SITE Figure 3. Analogy Between CONUS and Panama Exposure Sites...Sherman Coastal Site for 2 Weeks, 520X. Figure 13. Photomicrograph of Fungi on Surface of Jungle Fatigue Strip Exposed at Fort Sherman Coastal Site for

  2. Analysing deterioration of marble stones exposed to underwater conditions

    Science.gov (United States)

    Cámara, Beatriz; Álvarez de Buergo, Mónica; Bethencourt, Manuel; Freire-Lista, David; Fort, Rafael

    2016-04-01

    The peculiar conditions of the marine environment make the conservation of underwater archaeological sites an extremely complex procedure. This is due to the fact that the prevailing conditions in this environment promote the development of deterioration phenomena in submerged artefacts through the synergistic action of physical, chemical and biological factors. The objective of the present investigation was to determine how petrophysical properties of cultural heritage materials can be affected by being exposed to the specific underwater conditions of the sea bottom, and so, to evaluate how this can affect, in a long term, in their durability and evolution when they part of an archaeological site. For this purpose, two types of marble (the Italian Carrara and the Spanish Macael) were subjected to an experiment consisting of exposing stone materials for one and a half year to underwater conditions. The experimental test was located in an archaeological site in the Bay of Cadiz (southern Spain), Bajo del Chapitel (recognized as Cultural Interest), which includes remains of shipwrecks from different periods. In this site, samples were submerged to 12 m depth and placed in the sea bottom simulating the different positions in which underwater archaeological objects can be found (fully exposed, half buried and covered). Petrophysical characterisation involved determination of the apparent and bulk densities, water saturation (maximum water content a material may contain), open porosity (porosity accessible to water), chromatic parameters and ultrasonic velocity. Before measuring, samples were subjected to mechanical cleaning (in those samples with biological colonization) and to removal of salt deposits. Results showed significant differences in these petrophysical properties after underwater submersion, which were directly related to the type of underwater exposure condition. Comparative analysis of petrophysical properties, like the one conducted in this study

  3. Deterioration of word meaning: implications for reading.

    Science.gov (United States)

    Patterson, K; Hodges, J R

    1992-12-01

    We investigated six patients with progressive focal dementia or progressive aphasia, who showed impairments in knowledge of word meaning ranging from moderate to very severe. In all cases, a test of oral word reading demonstrated preserved reading of words with regular spelling-to-sound correspondences (e.g. MINT), but impaired reading of words with atypical correspondences (e.g. PINT). The level of success on these "exception" words was significantly related to word frequency, and the most common error was the assignment of a more typical spelling-sound correspondence. Various explanations are considered for this common association between loss of word meaning and a surface alexic pattern of reading performance.

  4. Quantifying tap-to-household water quality deterioration in urban communities in Vellore, India: The impact of spatial assumptions.

    Science.gov (United States)

    Alarcon Falconi, Tania M; Kulinkina, Alexandra V; Mohan, Venkata Raghava; Francis, Mark R; Kattula, Deepthi; Sarkar, Rajiv; Ward, Honorine; Kang, Gagandeep; Balraj, Vinohar; Naumova, Elena N

    2017-01-01

    Municipal water sources in India have been found to be highly contaminated, with further water quality deterioration occurring during household storage. Quantifying water quality deterioration requires knowledge about the exact source tap and length of water storage at the household, which is not usually known. This study presents a methodology to link source and household stored water, and explores the effects of spatial assumptions on the association between tap-to-household water quality deterioration and enteric infections in two semi-urban slums of Vellore, India. To determine a possible water source for each household sample, we paired household and tap samples collected on the same day using three spatial approaches implemented in GIS: minimum Euclidean distance; minimum network distance; and inverse network-distance weighted average. Logistic and Poisson regression models were used to determine associations between water quality deterioration and household-level characteristics, and between diarrheal cases and water quality deterioration. On average, 60% of households had higher fecal coliform concentrations in household samples than at source taps. Only the weighted average approach detected a higher risk of water quality deterioration for households that do not purify water and that have animals in the home (RR=1.50 [1.03, 2.18], p=0.033); and showed that households with water quality deterioration were more likely to report diarrheal cases (OR=3.08 [1.21, 8.18], p=0.02). Studies to assess contamination between source and household are rare due to methodological challenges and high costs associated with collecting paired samples. Our study demonstrated it is possible to derive useful spatial links between samples post hoc; and that the pairing approach affects the conclusions related to associations between enteric infections and water quality deterioration. Copyright © 2016 Elsevier GmbH. All rights reserved.

  5. A literature review of time-deterioration prediction techniques

    Science.gov (United States)

    Purvis, Ronald L.; Graber, Donald R.; Clear, Kenneth C.; Markow, Michael J.

    1992-07-01

    A literature review of existing deterioration models used to predict corrosion-related deterioration on reinforced concrete bridges is presented. Most models in this review are based on the performance of all bridges in a system. In addition, the model information was developed using condition ratings provided by technical-inspectors performing visual surveys in accordance with the National Bridge Inspection Standards (NBIS). Discussion of the models illuminates equation definitions, research parameters, and life-cycle cost analyses. An annotated bibliography is included.

  6. Measurement of Deterioration of Frying Oil Using Electrical Properties

    OpenAIRE

    羽倉, 義雄; 佐々木, 芳浩; 鈴木, 寛一

    2006-01-01

    In this study, the relationship between the electrical properties of frying oil (relative dielectric constant and conductance) and its deterioration indicators (acid value, amounts of polymerized triacylglycerols and chromaticity) were examined, focusing on the changes in electrical properties that accompany deterioration. The samples of frying oil used in this experiment were collected from fried food processing sites (school, hospital and factory feeding centers) and were collected at closi...

  7. Bundle Pricing Decisions for Fresh Products with Quality Deterioration

    OpenAIRE

    Fang, Yan; Jiang, Yiping; Han, Xingxing

    2018-01-01

    How to sell fresh products quickly to decrease the storage cost and to meet customer quality requirement is of vital importance in the food supply chain. Bundling fresh products is an efficient strategy to promote sales and reduce storage pressure of retailers. In this paper, we consider the bundle pricing decisions for homogeneous fresh products with quality deterioration. The value of fresh products with quality deterioration is approximated as an exponential function based on which custome...

  8. Modelling of the Deterioration of Reinforced Concrete Structures

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Stochastic modelling of the deterioration of reinforced concrete structures is addressed in this paper on basis of a detailed modelling of corrosion initiation and corrosion cracking. It is proposed that modelling of the deterioration of concrete should be based on a sound understanding...... of the physical and chemical properties of the concrete. The relationship between rebar corrosion and crack width is investigated. A new service life definition based on evolution of the corrosion crack width is proposed....

  9. Significant cooling effect on the surface due to soot particles over Brahmaputra River Valley region, India: An impact on regional climate

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, S., E-mail: smbtiwari@tropmet.res.in [Indian Institute of Tropical Meteorology, New Delhi Branch, New Delhi 110060 (India); Department of Environmental Science and Analytical Chemistry, Stockholm University, Stockholm SE-10691 (Sweden); Kumar, R. [Research Application Laboratory, National Center for Atmospheric Research, Boulder, CO (United States); Tunved, P. [Department of Environmental Science and Analytical Chemistry, Stockholm University, Stockholm SE-10691 (Sweden); Singh, S. [CSIR, Central Institute of Mining & Fuel Research, Dhanbad, Jharkhand 826001 (India); Panicker, A.S. [Indian Institute of Tropical Meteorology, Pune 411008 (India)

    2016-08-15

    Black carbon (BC) is an important atmospheric aerosol constituent that affects the climate by absorbing (directly) the sunlight and modifying cloud characteristics (indirectly). Here, we present first time yearlong measurements of BC and carbon monoxide (CO) from an urban location of Guwahati located in the Brahmaputra River valley (BRV) in the northeast region of India from 1st July 2013 to 30th June 2014. Daily BC concentrations varied within the range of 2.86 to 11.56 μg m{sup −3} with an annual average of 7.17 ± 1.89 μg m{sup −3}{sub ,} while, CO varied from 0.19 to 1.20 ppm with a mean value of 0.51 ± 0.19 ppm during the study period. The concentrations of BC (8.37 μg m{sup −3}) and CO (0.67 ppm) were ~ 39% and ~ 55% higher during the dry months (October to March) than the wet months (April to September) suggesting that seasonal changes in meteorology and emission sources play an important role in controlling these species. The seasonal ΔBC/ΔCO ratios were highest (lowest) in the pre-monsoon (winter) 18.1 ± 1.4 μg m{sup −3} ppmv{sup −1} (12.6 ± 2.2 μg m{sup −3} ppmv{sup −1}) which indicate the combustion of biofuel/biomass as well as direct emissions from fossil fuel during the pre-monsoon season. The annual BC emission was estimated to be 2.72 Gg in and around Guwahati which is about 44% lower than the mega city ‘Delhi’ (4.86 Gg). During the study period, the annual mean radiative forcing (RF) at the top of the atmosphere (TOA) for clear skies of BC was + 9.5 Wm{sup −2}, however, the RF value at the surface (SFC) was − 21.1 Wm{sup −2} which indicates the net warming and cooling effects, respectively. The highest RF at SFC was in the month of April (− 30 Wm{sup −2}) which is coincident with the highest BC mass level. The BC atmospheric radiative forcing (ARF) was + 30.16 (annual mean) Wm{sup −2} varying from + 23.1 to + 43.8 Wm{sup −2}. The annual mean atmospheric heating rate (AHR) due to the BC aerosols was 0.86 K

  10. Detection Of Concrete Deterioration By Staining

    Science.gov (United States)

    Guthrie, Jr., George D.; Carey, J. William

    1999-09-21

    A method using concentrated aqueous solutions of sodium cobaltinitrite and a rhodamine dye is described which can be used to identify concrete that contains gels formed by the alkali-silica reaction (ASR), and to identify degraded concrete which results in a porous or semi-permeable paste due to carbonation or leaching. These solutions present little health or environmental risk, are readily applied, and rapidly discriminate between two chemically distinct gels; K-rich, Na--K--Ca--Si gels are identified by yellow staining, and alkali-poor, Ca--Si gels are identified by pink staining.

  11. Terrestrial hydro-climatic change, lake shrinkage and water resource deterioration: Analysis of current to future drivers across Asia

    Science.gov (United States)

    Jarsjo, J.; Beygi, H.; Thorslund, J.

    2016-12-01

    Due to overlapping effects of different anthropogenic pressures and natural variability, main drivers behind on-going changes in the water cycle have in many cases not been identified, which complicates management of water resources. For instance, in many parts of the world, and not least in semi-arid and arid parts of Asia, lowered groundwater levels and shrinkage of surface water bodies with associated salinization and water quality deterioration constitute great challenges. With the aim to identify main drivers and mechanisms behind such changes, we here combine (i) historical observations of long-term, large scale change, (ii) ensemble projections of expected future change from the climate models of the Coupled Model Intercomparison Project Phase 5 (CMIP 5) and (iii) output from water balance modelling. Our particular focus is on regions near shrinking lakes. For the principal Lake Urmia in Iran, results show that agricultural intensification including irrigation expansion has clearly contributed to the surprisingly rapid water quality deterioration and lake shrinkage, from 10% lake area reduction in 2002 to the current value of about 75% (leaving billion of tons of salt exposed in its basin). Nevertheless, runoff decrease due to climate change has had an even larger effect. For the Aral Sea in Central Asia, where problems accelerated much earlier (in the 1990's), land-use change and irrigation expansion can fully explain the disastrous surface water deficits and water quality problems in the extensive low-lying parts of the basin. However, projections show that climate-driven runoff decrease in the headwaters of the Aral Sea basin may become a dominant driver of continued change in the near-future. More generally, present results illustrate that mitigation measures that compensate only for land-use driven effects may not reverse current trends of decreasing water availability, due to increasingly strong impacts of climate-driven runoff decrease. This has

  12. Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions

    Energy Technology Data Exchange (ETDEWEB)

    Kunther, W., E-mail: Wolfgang.Kunther@empa.ch [Empa, Laboratory for Concrete and Construction Chemistry, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Lothenbach, B. [Empa, Laboratory for Concrete and Construction Chemistry, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Scrivener, K. [EPFL, Laboratory of Construction Materials, CH-1015 Lausanne (Switzerland)

    2013-02-15

    This work investigates the influence of bicarbonate ions on the deterioration of cementitious material exposed to sulfate ions. Mortars based on a CEM I and on a CEM III/B cement were investigated. Experimental investigations were compared to thermodynamic modeling and phase characterization to understand the differences in deterioration. The presence of bicarbonate ions significantly reduced the expansion of the CEM I mortars. Thermodynamic modeling showed that at high concentrations of bicarbonate ettringite and gypsum become unstable. Microstructural characterization combined with information from thermodynamic modeling suggests that conditions of high supersaturation with respect to ettringite are unlikely in the samples exposed in solutions containing bicarbonate. Consequently, expansive forces are not generated by the crystallization pressure of ettringite. There was little expansion of the CEM III/B sample even in the sodium sulfate solution. In the bicarbonate solution this mortar showed a highly leached zone at the surface in which calcite was observed.

  13. Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions

    International Nuclear Information System (INIS)

    Kunther, W.; Lothenbach, B.; Scrivener, K.

    2013-01-01

    This work investigates the influence of bicarbonate ions on the deterioration of cementitious material exposed to sulfate ions. Mortars based on a CEM I and on a CEM III/B cement were investigated. Experimental investigations were compared to thermodynamic modeling and phase characterization to understand the differences in deterioration. The presence of bicarbonate ions significantly reduced the expansion of the CEM I mortars. Thermodynamic modeling showed that at high concentrations of bicarbonate ettringite and gypsum become unstable. Microstructural characterization combined with information from thermodynamic modeling suggests that conditions of high supersaturation with respect to ettringite are unlikely in the samples exposed in solutions containing bicarbonate. Consequently, expansive forces are not generated by the crystallization pressure of ettringite. There was little expansion of the CEM III/B sample even in the sodium sulfate solution. In the bicarbonate solution this mortar showed a highly leached zone at the surface in which calcite was observed.

  14. Macroscopical morphology of deterioration of the stone used in the cathedral whole of Granada/Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1992-06-01

    Full Text Available The main factors of deterioration that affect the Cathedral Whole of Granada are one of natural thermic origin due to the low temperatures during the winters and the higher thermic oscillations and those of anthropogenical origin: fundamentally the oxidation of metallic elements and atmospheric pollution due to burnt products. For this reason, the more important deterioration mechanisms are the freezing ones due to the expansion produced in the water retained inside the pores and microcracks, fundamentally in the architectonic elements with high expositional surface and in their shady orientation; the main indicators produced are fissuring and spalling. In this way, a lot of elements of Santa Pudia stone located in the Royal Chapel crenellations have disappeared and the rest are very deteriorated. The more compact Sierra Elvira stone used on the upper zone of the cornices has also been affected by the freezing mechanism, which starts with the microcracks produced by differential dilatations due to the thermic oscillations which made the water access easy. The iron corrosion and later expansion of the oxidation products has provoked the cracking and fissuring of many ornamental elements like balls, pinnacles, etc, and this situation has obliged their dismantling on the upper zones due to the danger to the public. The mechanisms of dissolution, crystallization cycles and Chemical action have led to abundant material loosening in the form of grain disgregations overcoats on the higher humidity zones, and formation of hollows (pitting, alveolar erosion, striations in the zones more exposed to the winds. This situation is generalized in the lower zones of the monument, except on the main facade, and in the parapets and lower zones of the cornices. The grain disgregations are more important when biological crusts or unburned deposits exist, the latter being of major abundance on the surfaces near the Gran Vía and in its orientation. It is necessary

  15. Simulating Regolith Excavation, Entrainment, Dispersal and Visibility Impairment due to Rocket Plume-Surface Interaction via a Hybrid Continuum-Rarefied Flow Solver

    Data.gov (United States)

    National Aeronautics and Space Administration — With NASA planning to redirect an asteroid and possible future missions to the Moon or Martian satellites, the effects of thruster plume impingement on the surfaces...

  16. Segmental equivalent temperature determined by means of a thermal manikin: A method for correcting errors due to incomplete contact of the body with a surface

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Janieas, N.R.D.J.; Silva, M.C.G.

    2004-01-01

    The segmental equivalent temperature determined by means of a thermal manikin is often correlated with the local thermal sensation of people and is used for indoor environment assessment. It is also used to assess performance of heated/cooled/ventilated car seats, etc. However, the body...... of the thermal manikins used at present is not as flexible as the human body and is divided into body segments with a surface area that differs from that of the human body in contact with a surface. The area of the segment in contact with a surface will depend on the shape and flexibility of the surface....... This will affect the accuracy in determination of the segmental equivalent temperature, and will result in incorrect assessment. This paper presents a method for correction of the segmental equivalent temperature for the above effects. Improvement in determination of the segmental equivalent temperature...

  17. Development of deterioration models and tests of structural materials for nuclear containment structures(III)

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Byung Hwan [Seoul National University, Seoul (Korea)

    2002-03-01

    The nuclear containment structures are very important infrastructures which require much cost for construction and maintenance. If these structures lose their functions and do not ensure their safety, great losses of human lives and properties will result. Therefore, the nuclear containment structures should secure appropriate safety and functions during these service lives. The nuclear concrete structures start to experience deterioration due to severe environmental condition, even though the concrete structures exhibit generally superior durability. It is, therefore, necessary to take appropriate actions at each stage of planning, design and construction to secure safety and functionability. Thorough examination of deterioration mechanism and comprehensive tests have been conducted to explore the durability characteristics of nuclear concrete structures. 88 refs., 70 figs., 12 tabs. (Author)

  18. Condition-Based Conveyor Belt Replacement Strategy in Lignite Mines with Random Belt Deterioration

    Science.gov (United States)

    Blazej, Ryszard; Jurdziak, Leszek

    2017-12-01

    In Polish lignite surface mines, condition-based belt replacement strategies are applied in order to assure profitable refurbishment of worn out belts performed by external firms specializing in belt maintenance. In two of three lignite mines, staff asses belt condition subjectively during visual inspections. Only one mine applies specialized diagnostic device (HRDS) allowing objective magnetic evaluation of belt core condition in order to choose the most profitable moment for the dismantling of worn out belt segments from conveyors and sending them to the maintenance firm which provides their refurbishment. This article describes the advantages of a new diagnostic device called DiagBelt. It was developed at the Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology. Economic gains from its application are calculated for the lignite mine and for the belt maintenance firm, taking into account random life (durability) of new and reconditioned belts (after the 1st and the 2nd refurbishment). Recursive calculations for following years allow the estimation of the length and costs of replaced, reconditioned and purchased belts on an annual basis, while the use of the Monte Carlo method allows the estimation of their variability caused by random deterioration of belts. Savings are obtained due to better selection of moments (times) for the replacement of belt segments and die to the possibility to qualify worn out belts for refurbishment without the need to remove their covers. In effect, increased belt durability and lowered share of waste belts (which were not qualified for reconditioning) create savings which can quickly cover expenditures on new diagnostic tools and regular belt inspections in the mine.

  19. Efficiency enhancement of fluorescence blue organic light-emitting diodes by incorporating Ag nanoparticles layers due to a localized surface plasmon

    Science.gov (United States)

    Nam, Minwoo; Chung, Nak-Kwan; Shim, Seob; Yun, Ju-Young; Kim, Jin-Tae; Pyo, Sung Gyu

    2017-09-01

    Enhanced electroluminescence in blue organic light-emitting diodes (OLEDs) is obtained by incorporating Ag nanoparticles (NPs) into hole injection layer of poly(3,4- ethylenedioxythiophene):polystyrene sulfonic acid (PEDOT:PSS). The absorption peak of the localized surface plasmons (LSPs) introduced by the 60 nm Ag NPs matches the emission wavelength of the blue OLEDs were matched at wavelength of 442 nm. In addition, to maximize their coupling and to prevent the quenching of the emission, the distance between surface plasmons (SPs) around NPs and organic fluorophores is optimized. Finally, the emission intensity and the current efficiency of diode with Ag NPs were increased by 19% and 18%, respectively.

  20. Optimal pricing and marketing planning for deteriorating items.

    Directory of Open Access Journals (Sweden)

    Seyed Reza Moosavi Tabatabaei

    Full Text Available Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

  1. Application of Artificial Intelligence for Bridge Deterioration Model

    Science.gov (United States)

    Chen, Zhang; Wu, Yangyang; Sun, Lijun

    2015-01-01

    The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention. PMID:26601121

  2. Optimal pricing and marketing planning for deteriorating items.

    Science.gov (United States)

    Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

    2017-01-01

    Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

  3. Optimal dynamic pricing and replenishment policies for deteriorating items

    Directory of Open Access Journals (Sweden)

    Masoud Rabbani

    2014-08-01

    Full Text Available Marketing strategies and proper inventory replenishment policies are often incorporated by enterprises to stimulate demand and maximize profit. The aim of this paper is to represent an integrated model for dynamic pricing and inventory control of deteriorating items. To reflect the dynamic characteristic of the problem, the selling price is defined as a time-dependent function of the initial selling price and the discount rate. In this regard, the price is exponentially discounted to compensate negative impact of the deterioration. The planning horizon is assumed to be infinite and the deterioration rate is time-dependent. In addition to price, the demand rate is dependent on advertisement as a powerful marketing tool. Several theoretical results and an iterative solution algorithm are developed to provide the optimal solution. Finally, to show validity of the model and illustrate the solution procedure, numerical results are presented.

  4. Application of Artificial Intelligence for Bridge Deterioration Model.

    Science.gov (United States)

    Chen, Zhang; Wu, Yangyang; Li, Li; Sun, Lijun

    2015-01-01

    The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention.

  5. Bundle Pricing Decisions for Fresh Products with Quality Deterioration

    Directory of Open Access Journals (Sweden)

    Yan Fang

    2018-01-01

    Full Text Available How to sell fresh products quickly to decrease the storage cost and to meet customer quality requirement is of vital importance in the food supply chain. Bundling fresh products is an efficient strategy to promote sales and reduce storage pressure of retailers. In this paper, we consider the bundle pricing decisions for homogeneous fresh products with quality deterioration. The value of fresh products with quality deterioration is approximated as an exponential function based on which customer’s reservation prices are calculated. A nonlinear mixed integer programming model is used to formulate the bundle pricing problem for fresh products. By adding auxiliary decision variables, this model is converted into a mixed integer linear program. Numerical experiments and sensitive analysis are conducted to provide managerial insights for bundling fresh products with quality deterioration.

  6. Optimal pricing and marketing planning for deteriorating items

    Science.gov (United States)

    Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

    2017-01-01

    Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue. PMID:28306750

  7. Using the ABCDE approach to assess the deteriorating patient.

    Science.gov (United States)

    Smith, Duncan; Bowden, Tracey

    2017-11-29

    Patients who deteriorate without recognition or timely interventions are at risk of critical care admission and increased morbidity or mortality. This article outlines the systematic ABCDE (airway, breathing, circulation, disability, exposure) approach to patient assessment, which enables healthcare practitioners to identify and respond to life-threatening conditions in order of priority. The patient's vital signs should be measured as part of the ABCDE assessment and recorded using a track and trigger tool to enhance recognition of physiological abnormalities that signal deterioration. To optimise communication and escalation of deteriorating patients, healthcare practitioners should report ABCDE assessment findings using a structured communication tool. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

  8. Application of Artificial Intelligence for Bridge Deterioration Model

    Directory of Open Access Journals (Sweden)

    Zhang Chen

    2015-01-01

    Full Text Available The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention.

  9. Measurement of ion species produced due to bombardment of 450 eV N{sub 2}{sup +} ions with hydrocarbons-covered surface of tungsten: Formation of tungsten nitride

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, S. [Atomic Physics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005 (India); Bhatt, P. [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India); Kumar, A. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India); Singh, B.K.; Singh, B.; Prajapati, S. [Atomic Physics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005 (India); Shanker, R., E-mail: shankerorama@gmail.com [Atomic Physics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005 (India)

    2016-08-01

    A laboratory experiment has been performed to study the ions that are produced due to collisions of 450 eV N{sub 2}{sup +} ions with a hydrocarbons-covered surface of polycrystalline tungsten at room temperature. Using a TOF mass spectrometry technique, the product ions formed in these collisions have been detected, identified and analyzed. Different ion–surface reaction processes, namely, neutralization, reflection, surface induced dissociation, surface induced chemical reactions and desorption are observed and discussed. Apart from the presence of desorbed aliphatic hydrocarbon and other ions, the mass spectra obtained from the considered collisions show the formation and sputtering of tungsten nitride (WN). A layer of WN on tungsten surface is known to decrease the sputtering of bulk tungsten in fusion devices more effectively than when the tungsten is bombarded with other seeding gases (He, Ar). It is further noted that there is a negligible diffusion of N in the bulk tungsten at room temperature.

  10. Surface Treatments to Minimize Concrete Deterioration. Report 2. Laboratory Evaluation of Surface Treatment Materials

    Science.gov (United States)

    1990-09-01

    latex admixtures were diluted with water and pumped to the nozzle using a Graco pump (Figure 12). A defoaming agent, Nopco NXZ, was added to some of the...Dry-mix shotcrete equipment Figure 12. Graco pump used to transfer latex-water solution to nozzle fill the hopper with dry mixture during application

  11. Where’s the Ground Surface? – Elevation Bias in LIDAR-derived Digital Elevation Models Due to Dense Vegetation in Oregon Tidal Marshes

    Science.gov (United States)

    Light Detection and Ranging (LIDAR) is a powerful resource for coastal and wetland managers and its use is increasing. Vegetation density and other land cover characteristics influence the accuracy of LIDAR-derived ground surface digital elevation models; however the degree to wh...

  12. Magnetohydrodynamic and thermal radiation effects on the boundary-layer flow due to a moving extensible surface with the velocity slip model: A comparative study of four nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Aly, Emad H., E-mail: efarag@uj.edu.sa [Department of Mathematics, Faculty of Science, University of Jeddah, Jeddah 21589 (Saudi Arabia); Department of Mathematics, Faculty of Education, Ain Shams University, Roxy, Cairo 11757 (Egypt); Sayed, Hamed M. [Department of Mathematics, Faculty of Education, Ain Shams University, Roxy, Cairo 11757 (Egypt); Department of Mathematics, Faculty of Sciences, Taibah University, Yanbu (Saudi Arabia)

    2017-01-15

    In the current work, we investigated effects of the velocity slip for the flow and heat transfer of four nanofluids over a non-linear stretching sheet taking into account the thermal radiation and magnetic field in presence of the effective electrical conductivity. The governing partial differential equations were transformed into a set of nonlinear ordinary differential equation using similarity transformations before being solved numerically by the Chebyshev pseudospectral differentiation matrix (ChPDM). It was found that the investigated parameters affect remarkably on the nanofluid stream function for the whole investigated nanoparticles. In addition, velocity and skin friction profiles of the four investigated nanofluids decreases and increases, respectively, with the increase of the magnetic parameter, first-order and second-order velocity slips. Further, the flow velocity, surface shear stress and temperature are strongly influenced on applying the velocity slip model, where lower values of the second-order imply higher surface heat flux and thereby making the fluid warmer. - Highlights: • A comparative study for four nanoparticles with MHD and thermal radiation effects was studied. • The effective electrical conductivity is mandatory; otherwise a spurious physical sight will be gained. • The investigated parameters affect remarkably on the nanofluids' flow. • The flow velocity, surface shear stress and temperature are strongly influenced by the slip model. • Lower values of the second-order imply higher surface heat flux and thereby making the fluid warmer.

  13. Second Tesseral Harmonic Torque Due to the DynamicS of the Oceanic Surface Layer as Detected by TOPEX/POSEIDON Altimetry 1993-2000

    Czech Academy of Sciences Publication Activity Database

    Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vítek, V.; Vojtíšková, M.

    2005-01-01

    Roč. 49, č. 1 (2005), s. 13-22 ISSN 0039-3169 R&D Projects: GA ČR GA205/05/2381 Institutional research plan: CEZ:AV0Z10030501 Keywords : ocean surface layer * variations * tesseral torque Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.656, year: 2005

  14. Investigation of deterioration mechanism of electrical ceramic insulating materials under high temperature

    International Nuclear Information System (INIS)

    Mizutani, Yoshinobu; Ito, Tetsuo; Okamoto, Tatsuki; Kumazawa, Ryoji; Aizawa, Rie; Moriyama, Hideshige

    2000-01-01

    It is thought that ceramic insulator can be applied to electric power equipments that are under high temperature not to be able use organic materials. Our research has suggested components of mica-alumina combined insulation. As the results of and carried out temperature accelerating test, combined insulation life is expected long term over 40 years at over 500-Celsius degrees. However to construct high reliable insulating system, it is clarified deterioration mechanism on combined insulation and evaluates life of that. Therefore we carried out metal behavior test and voltage aging test using mica-sheet and alumina-cloth that are components of combined insulation under high temperature in nitrogen gas atmosphere. It is cleared two metal behavior mechanisms: One is that the opening of insulator are filled up with copper that is oxidized, the other is the metal diffuses in alumina-cloth through surface. And distance of metal behavior is able to be estimated at modulate temperature and in modulate time. It is also cleared that alumina-cloth is deteriorated by metal behavior into alumina-cloth. These results indicate that combined insulation is deteriorated from electrode side by metal behavior and is finally broken down through alumina-cloth. (author)

  15. The enhancement of the deteriorated South African bond options market

    Directory of Open Access Journals (Sweden)

    Coert Frederik Erasmus

    2015-06-01

    Full Text Available nvestments, especially those in the bond market, carry a level of risk. Risks in the bond market can be mitigated by transacting in option contracts. In the developing South African economy, trading activity of over-the-counter (OTC bond options decreased significantly. Possible deteriorating factors and interventions to enhance OTC bond options were investigated in this research. Experts in the OTC bond option market were surveyed and the quantitative data collected was analysed with descriptive statistical methods. Results indicated that three factors were positively identified as deteriorating factors in the OTC bond option market and that five different interventions were possible to possible enhance this market.

  16. A production inventory model with deteriorating items and shortages

    Directory of Open Access Journals (Sweden)

    Samanta G.P.

    2004-01-01

    Full Text Available A continuous production control inventory model for deteriorating items with shortages is developed. A number of structural properties of the inventory system are studied analytically. The formulae for the optimal average system cost, stock level, backlog level and production cycle time are derived when the deterioration rate is very small. Numerical examples are taken to illustrate the procedure of finding the optimal total inventory cost, stock level, backlog level and production cycle time. Sensitivity analysis is carried out to demonstrate the effects of changing parameter values on the optimal solution of the system.

  17. An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

    Science.gov (United States)

    Uthayakumar, R.; Tharani, S.

    2017-12-01

    Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

  18. Experimental investigation on the effect of surface electric field in the growth of tungsten nano-tendril morphology due to low energy helium irradiation

    International Nuclear Information System (INIS)

    Woller, K.B.; Whyte, D.G.; Wright, G.M.; Brunner, D.

    2016-01-01

    The mechanisms responsible for and controlling the growth of tungsten nano-tendrils (or “fuzz”) under low-energy helium plasma exposure remain unclear. For the first time in nano-tendril experiments, the plasma sheath-produced electric field and the helium (He) ion energy have been decoupled, showing that the sheath electric field has little impact on nano-tendril growth, eliminating a possible cause for tendril growth. The well-established necessary growth conditions for W fuzz were maintained with He ion flux density Γ He  > 10 21  He m −2  s −1 , surface temperature T s  = 1273 K, He ion energy E He  = 64 eV, and He ion fluence Φ He  > 10 24  He m −2 . A grid is situated between the tungsten sample and plasma, with the grid and sample potentials independently controlled in order to control the electric field at the surface of the sample while maintaining the same incident He ion energy to the surface. A calculation of the potential profile in the drift space between the grid and sample was used to account for space charge and calculate the electric field at the surface of the sample. Tungsten fuzz formed at all electric fields tested, even near zero electric field. Also, the depth of the resulting W fuzz layer was unaltered by the electric field when compared to the calculated depth determined from an empirical growth model. The conclusion is that the sheath electric field is not necessary to cause the changes in surface morphology. - Highlights: • Surface electric field is proposed as a possible driver of tungsten fuzz growth. • A method that decouples plasma sheath electric field and ion energy is described. • Tungsten fuzz is shown to grow even without direct exposure to plasma. • Tungsten fuzz grows to the same depth with and without the plasma sheath.

  19. Application of particle swarm optimisation for solving deteriorating inventory model with fluctuating demand and controllable deterioration rate

    Science.gov (United States)

    Chen, Yu-Ren; Dye, Chung-Yuan

    2013-06-01

    In most of the inventory models in the literature, the deterioration rate of goods is viewed as an exogenous variable, which is not subject to control. In the real market, the retailer can reduce the deterioration rate of product by making effective capital investment in storehouse equipments. In this study, we formulate a deteriorating inventory model with time-varying demand by allowing preservation technology cost as a decision variable in conjunction with replacement policy. The objective is to find the optimal replenishment and preservation technology investment strategies while minimising the total cost over the planning horizon. For any given feasible replenishment scheme, we first prove that the optimal preservation technology investment strategy not only exists but is also unique. Then, a particle swarm optimisation is coded and used to solve the nonlinear programming problem by employing the properties derived from this article. Some numerical examples are used to illustrate the features of the proposed model.

  20. Inhibition of Growth of Fungi Isolated From Deteriorating Melon ...

    African Journals Online (AJOL)

    A study was conducted to investigate the effect of extracts of Punica granatum and Cymbopogon citratus on Aspergillus nivale, Rhizopus stolonifer , Mucor mucido and Aspergillus fumigatus isolated from deteriorating melon seed using radial growth technique. Phytochemical screening revealed that extracts the plants ...

  1. 40 CFR 52.1634 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1634 Section 52.1634 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The plan submitted by the Governor of New Mexico on February 21... adopted by the NMEID on March 9, 1990), Air Quality Control Regulation 707—Permits, Prevention of...

  2. 40 CFR 52.1778 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.1778 Section 52.1778 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(b) [Reserved] (c) All applications and other information... Resources, Division of Air Quality, 1641 Mail Service Center, Raleigh, North Carolina 27699-1641 or local...

  3. 40 CFR 52.60 - Significant deterioration of air quality.

    Science.gov (United States)

    2010-07-01

    ... quality. 52.60 Section 52.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) All applications and other information required pursuant to § 52.21 from... “Guideline on Air Quality Models (Revised)” or other models approved by EPA. [42 FR 22869, May 5, 1977, as...

  4. Maintenance Models for Systems subject to Measurable Deterioration

    NARCIS (Netherlands)

    R.P. Nicolai (Robin)

    2008-01-01

    textabstractComplex engineering systems such as bridges, roads, flood defence structures, and power pylons play an important role in our society. Unfortunately such systems are subject to deterioration, meaning that in course of time their condition falls from higher to lower, and possibly even to

  5. Inhibition of Growth of Fungi Isolated From Deteriorating Melon ...

    African Journals Online (AJOL)

    BSN

    Abstract. A study was conducted to investigate the effect of extracts of Punica granatum and. Cymbopogon citratus on Aspergillus nivale, Rhizopus stolonifer , Mucor mucido and. Aspergillus fumigatus isolated from deteriorating melon seed using radial growth technique. Phytochemical screening revealed that extracts the ...

  6. Bio-deterioration of breadfruit (Artocarpus Communis) in storage ...

    African Journals Online (AJOL)

    The bio-deterioration of breadfruit in storage and its effects on the nutrient composition of the fruit was investigated at Ibadan, Southwestern Nigeria. Freshly dropped fruits were stored under laboratory conditions for a period of 9 days. Aspergillus niger, Rhizopus stolonifer, Botryodiplodia theobromae, Mycovellosiella fulva, ...

  7. Optimal time policy for deteriorating items of two-warehouse ...

    Indian Academy of Sciences (India)

    We consider the problem of a two-warehouse inventory system under the effect of stock dependent demand. There are two warehouses to store the goods in which the first is rented warehouse and the second is own warehouse that deteriorates with two different rates. The aim of this study is to determine the optimal order ...

  8. Perceived Visual Deterioration among a Selected Group of Dental ...

    African Journals Online (AJOL)

    To assess the perceived visual deterioration and the determinants among selected dental surgeons in Nigeria. A cross-sectional survey of Resident doctors attending the Revision course of Faculty of Dental Surgery of the National Postgraduate Medical College of Nigeria in Lagos University Teaching Hospital, Lagos, ...

  9. Optimal time policy for deteriorating items of two-warehouse

    Indian Academy of Sciences (India)

    ... goods in which the first is rented warehouse and the second is own warehouse that deteriorates with two different rates. The aim of this study is to determine the optimal order quantity to maximize the profit of the projected model. Finally, some numerical examples and sensitivity analysis of parameters are made to validate ...

  10. Effectiveness of respiratory rates in determining clinical deterioration

    DEFF Research Database (Denmark)

    Mølgaard, Rikke Rishøj; Larsen, Palle; Håkonsen, Sasa Jul

    2016-01-01

    Review question/objective: The objective of this systematic review is to identify, appraise and synthesize the best available evidence on the effectiveness of manually measuring respiratory rates for 60 s or less in detecting clinical deterioration of inpatients. More specifically, the review...

  11. Clinical challenge: Deteriorating liver function in TB and HIV co ...

    African Journals Online (AJOL)

    ... and ask them to describe the approach that they would take if they saw the case in their local hospital setting. In our first edition, a patient with deteriorating liver function is presented by Prof. Francois Venter and Dr Ntsakisi Masingi, and then discussed by Dr Sarah Stacey in Johannesburg and Dr Sarah Fidler in London.

  12. Microbial deterioration of stored water for users supplied by stand ...

    African Journals Online (AJOL)

    Two forms of water service delivery in peri-urban settlements in the eThekwini municipal region are communal stand-pipes and household ground-tanks. Water from these sources requires storage prior to use. Previous studies have shown that water quality tends to deteriorate during storage. This study was conducted ...

  13. A fast ethanol assay to detect seed deterioration

    NARCIS (Netherlands)

    Kodde, J.; Buckley, W.T.; Groot, de C.C.; Retiere, M.; Víquez Zamora, A.M.; Groot, S.P.C.

    2012-01-01

    The most common way to test seed quality is to use a simple and reliable but time- and space-consuming germination test. In this paper we present a fast and simple method to analyse cabbage seed deterioration by measuring ethanol production from partially imbibed seeds. The method uses a modified

  14. An EOQ Model for Delayed Deteriorating Items with Linear Time ...

    African Journals Online (AJOL)

    An EOQ model for delayed deteriorating items with linear time dependent holding cost is considered in this paper. This is a little deviation from most inventory models that consider the holding cost to be constant. In this paper, permissible delay in payment is not considered rather the payment is made immediately the ...

  15. Optimization of Weibull deteriorating items inventory model under ...

    Indian Academy of Sciences (India)

    In this study, we have discussed the development of an inventory model when the deterioration rate of the item follows Weibull two parameter distributions under the effect of selling price and time dependent demand, since, not only the selling price, but also the time is a crucial factor to enhance the demand in the market as ...

  16. The impact of water quality deterioration on macroinvertebrate ...

    African Journals Online (AJOL)

    A multimetric approach, using 21 metrics representing five categories — abundance, composition, richness, diversity and biotic indices — was applied to investigate the impacts of water quality deterioration on macro - invertebrate communities in the Swartkops River. Macroinvertebrates were sampled seasonally between ...

  17. Resistance of biofilm-covered mortars to microbiologically influenced deterioration simulated by sulfuric acid exposure

    Energy Technology Data Exchange (ETDEWEB)

    Soleimani, Sahar, E-mail: ssoleima@connect.carleton.ca; Isgor, O. Burkan, E-mail: burkan_isgor@carleton.ca; Ormeci, Banu, E-mail: banu_ormeci@carleton.ca

    2013-11-15

    Following the reported success of biofilm applications on metal surfaces to inhibit microbiologically influenced corrosion, effectiveness and sustainability of E. coli DH5α biofilm on mortar surface to prevent microbiologically influenced concrete deterioration (MICD) are investigated. Experiments simulating microbial attack were carried out by exposing incrementally biofilm-covered mortar specimens to sulfuric acid solutions with pH ranging from 3 to 6. Results showed that calcium concentration in control reactors without biofilm was 23–47% higher than the reactors with biofilm-covered mortar. Formation of amorphous silica gel as an indication of early stages of acid attack was observed only on the control mortar specimens without biofilm. During acidification, the biofilm continued to grow and its thickness almost doubled from ∼ 30 μm before acidification to ∼ 60 μm after acidification. These results demonstrated that E. coli DH5α biofilm was able to provide a protective and sustainable barrier on mortar surfaces against medium to strong sulfuric acid attack. -- Highlights: •Effectiveness of E.coli DH5α biofilm to prevent MICD was studied. •Conditions that lead to MICD were simulated by chemical acidification. •Biofilm-covered mortar specimens were exposed to sulfuric acid solutions. •The presence of biofilm helped reduce the chemically-induced mortar deterioration. •Biofilm remained alive and continued to grow during the acidification process.

  18. Analysis of the patterns of deterioration of glasses in aqueous medium: joint utilisation of the SIMS and ESCA techniques

    International Nuclear Information System (INIS)

    Touray, J.C.; Thomassin, J.H.; Baillif, P.; Scherrer, S.; Naudin, F.; Fournier, P.; Champomier, F.

    1981-01-01

    The paper shows the advantage of the joint utilisation of the techniques of secondary ion mass spectroscopy and of photoelectron spectroscopy for the analysis of superficial layers of glasses subjected to deterioration. During an attack in the water, it is found that aluminium is attached to the surface of a float glass in a manner which seems independent of the concentration. A surface stratification, which suggests a corrosion mechanism, is observed. A second example deals with the deterioration of a phosphate glass in the presence of water. The presence of a surface precipitate of calcium phosphate is found above a layer of hydrated glass. The ESCA method makes it possible to specify that the apatite precipitate contains silicon or sodium [fr

  19. MATHEMATICAL MODEL FOR CALCULATION OF MINIMUM PRESSURE PERTAINING TO DESTRUCTION OF SURFACE CORROSION LAYER DUE TO IMPACT OF WORKING LIQUID REVERSIVE STREAM

    Directory of Open Access Journals (Sweden)

    I. V. Kachanov

    2014-01-01

    Full Text Available Due to balance of external and internal force capacities a variation quasistatic problem has been solved in the paper. The problem allows to determine optimum values of α and β angles in the accepted field of sliding lines when destruction pressure takes on a minimum value pmin. It has been ascertained that the minimum pressure pmin which is necessary for destruction of a corrosion layer is registered at stream compression coefficient λ = 0,063 and the pressure is equal to 8-17 MPa for the investigated speed range v = 80-140 m/s.

  20. Optimal Transfer-Ordering Strategy for a Deteriorating Inventory in Declining Market

    Directory of Open Access Journals (Sweden)

    Nita H. Shah

    2009-01-01

    Full Text Available The retailer's optimal procurement quantity and the number of transfers from the warehouse to the display area are determined when demand is decreasing due to recession and items in inventory are subject to deterioration at a constant rate. The objective is to maximize the retailer's total profit per unit time. The algorithms are derived to find the optimal strategy by retailer. Numerical examples are given to illustrate the proposed model. It is observed that during recession when demand is decreasing, retailer should keep a check on transportation cost and ordering cost. The display units in the show room may attract the customer.

  1. Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face

    Directory of Open Access Journals (Sweden)

    Lalsingh Khalsa

    2018-01-01

    Full Text Available This paper is an attempt to determine quasi-static thermal stresses in a thin elliptical plate which is subjected to transient temperature on the top face with zero temperature on the lower face and the homogeneous boundary condition of the third kind on the fixed elliptical curved surface. The solution to conductivity equation is elucidated by employing a classical method. The solution of stress components is achieved by using Goodier’s and Airy’s potential function involving the Mathieu and modified functions and their derivatives. The obtained numerical results are accurate enough for practical purposes, better understanding of the underlying elliptic object, and better estimates of the thermal effect on the thermoelastic problem. The conclusions emphasize the importance of better understanding of the underlying elliptic structure, improved understanding of its relationship to circular object profile, and better estimates of the thermal effect on the thermoelastic problem.

  2. Conversion of terahertz wave polarization at the boundary of a layered superconductor due to the resonance excitation of oblique surface waves.

    Science.gov (United States)

    Averkov, Yu O; Yakovenko, V M; Yampol'skii, V A; Nori, Franco

    2012-07-13

    We predict a complete TM↔TE transformation of the polarization of terahertz electromagnetic waves reflected from a strongly anisotropic boundary of a layered superconductor. We consider the case when the wave is incident on the superconductor from a dielectric prism separated from the sample by a thin vacuum gap. The physical origin of the predicted phenomenon is similar to the Wood anomalies known in optics and is related to the resonance excitation of the oblique surface waves. We also discuss the dispersion relation for these waves, propagating along the boundary of the superconductor at some angle with respect to the anisotropy axis, as well as their excitation by the attenuated-total-reflection method.

  3. Water treatment strategy for underground and surface waters in order to reduce the hydro-network contamination due to close out of a uranium mining area in Romania

    International Nuclear Information System (INIS)

    Georgescu, D.; Radulescu, C.

    1999-01-01

    Under the present circumstances, in correlation with the national nuclear program and strategy, it is foreseen to stop the exploitation activities in two important uranium mining areas from Romania. This close-out action is involving a number of technical decisions for environmental restoration. Reduction of waters radioactive contamination in these zones, both during the operating period and after the closeout period, is one of the main components of the environment rehabilitation strategy. In this paper there are presented the today situation and the program foreseen for ground and surface water treatment at an uranium mining unit situated in the SW side of Romania, program based on the results of our own research carried out to decrease the content of pollutant radioactive elements. (author)

  4. Rock Pore Structure as Main Reason of Rock Deterioration

    Science.gov (United States)

    Ondrášik, Martin; Kopecký, Miloslav

    2014-03-01

    Crashed or dimensional rocks have been used as natural construction material, decoration stone or as material for artistic sculptures. Especially old historical towns not only in Slovakia have had experiences with use of stones for construction purposes for centuries. The whole buildings were made from dimensional stone, like sandstone, limestone or rhyolite. Pavements were made especially from basalt, andesite, rhyolite or granite. Also the most common modern construction material - concrete includes large amounts of crashed rock, especially limestone, dolostone and andesite. However, rock as any other material if exposed to exogenous processes starts to deteriorate. Especially mechanical weathering can be very intensive if rock with unsuitable rock properties is used. For long it had been believed that repeated freezing and thawing in relation to high absorption is the main reason of the rock deterioration. In Slovakia for many years the high water absorption was set as exclusion criterion for use of rocks and stones in building industry. Only after 1989 the absorption was accepted as merely informational rock property and not exclusion. The reason of the change was not the understanding of the relationship between the porosity and rock deterioration, but more or less good experiences with some high porous rocks used in constructions exposed to severe weather conditions and proving a lack of relationship between rock freeze-thaw resistivity and water absorption. Results of the recent worldwide research suggest that understanding a resistivity of rocks against deterioration is hidden not in the absorption but in the structure of rock pores in relation to thermodynamic properties of pore water and tensile strength of rocks and rock minerals. Also this article presents some results of research on rock deterioration and pore structure performed on 88 rock samples. The results divide the rocks tested into two groups - group N in which the pore water does not freeze

  5. Surface deformation due to the M6.5 Lefkada earthquake (17 November 2015) exploiting SENTINEL-1 and GNSS observations. Implications for seismic hazard.

    Science.gov (United States)

    Elias, Panagiotis; Ganas, Athanassios; Briole, Pierre; Parcharidis, Isaak; Avallone, Antonio; Roukounakis, Nikos; Argyrakis, Panagiotis; Roger, Marine; Cheloni, Daniele; Tolomei, Cristiano; Mendonidis, Evangelos; Moraitini, Evelyn; Papanikolaou, Marios; Papastergios, Asterios

    2017-04-01

    The 17 November 2015 M=6.5 Lefkada earthquake in the Ionian sea, Greece, produced tens of centimetres of co-seismic motion in both Lefkada and Cephalonia islands. We present the full picture of the co-seismic displacements as mapped by space geodetic techniques, Sentinel 1A INSAR and permanent GNSS stations. We use this data together with the constraints from seismology to invert for fault localisation , size and slip distribution. We observed post-seismic displacements throughout most of southern Lefkada and northern Cephalonia islands recorded at the two NOA GNSS stations of PONT and SPAN and four additional permanent and six campaign GNSS stations established after the earthquake. Those displacements range from a few centimetres near the epicentre to a few millimetres far from the fault. We model the post-seismic displacements as due to uniform slip on the same fault plane that ruptured during the main event. The model shows a right-lateral afterslip along the fault but with slightly larger extension in comparison to the co-seismic slip, less shallow and deeper. This transient strain followed the main event during a short period of 80 days as modelled with an exponential law. Currently, the post-seismic deformation is being investigated by exploiting multi-temporal Sentinel 1A/B InSAR processed among others with ESA's Geohazards Exploitation Platform and SNAP software. The first challenging issue is the coherence which is not high in the area due to the vegetation cover. The second one is the correction of the tropospheric component. We estimate it using the tropospheric delay at the permanent GNSS stations and by using an meteorological model based on the WRF refined at the spatial resolution of 1 km. The earthquakes occurred in the Central Ionian area since 1983, studied both by seismology and space geodesy imply a seismic gap offshore NW Cephalonia that needs to be monitored.

  6. Effects of temperature dependent conductivity and absorptive/generative heat transfer on MHD three dimensional flow of Williamson fluid due to bidirectional non-linear stretching surface

    Science.gov (United States)

    Bilal, S.; Khalil-ur-Rehman; Malik, M. Y.; Hussain, Arif; Khan, Mair

    Present work is communicated to identify characteristics of magnetohydrodynamic (MHD) three dimensional boundary layer flow of Williamson fluid confined by a bidirectional stretched surface. Conductivity of working fluid is assumed to be temperature dependent. Generative/absorptive heat transfer is also taken into account. Mathematical model is formulated in the form of partial expressions and then transmuted into ordinary differential equations with the help of newfangled set of similarity transformations. The resulting non-linear differential system of equations is solved numerically with the aid of Runge-Kutta algorithm supported by shooting method. Flow features are exemplified quantitatively through graphs. Scintillating results for friction factor and convective heat transfer are computed and scrutinized tabularly. Furthermore, the accuracy of present results is tested with existing literature and we found an excellent agreement. It is inferred that velocity along x-direction mounts whereas along y-direction depreciates for incrementing values of stretching ratio parameter. Moreover, it is also elucidated that non-linearity index tends to decrement the velocity and thermal distributions of fluid flow.

  7. Effects of temperature dependent conductivity and absorptive/generative heat transfer on MHD three dimensional flow of Williamson fluid due to bidirectional non-linear stretching surface

    Directory of Open Access Journals (Sweden)

    S. Bilal

    Full Text Available Present work is communicated to identify characteristics of magnetohydrodynamic (MHD three dimensional boundary layer flow of Williamson fluid confined by a bidirectional stretched surface. Conductivity of working fluid is assumed to be temperature dependent. Generative/absorptive heat transfer is also taken into account. Mathematical model is formulated in the form of partial expressions and then transmuted into ordinary differential equations with the help of newfangled set of similarity transformations. The resulting non-linear differential system of equations is solved numerically with the aid of Runge-Kutta algorithm supported by shooting method. Flow features are exemplified quantitatively through graphs. Scintillating results for friction factor and convective heat transfer are computed and scrutinized tabularly. Furthermore, the accuracy of present results is tested with existing literature and we found an excellent agreement. It is inferred that velocity along x-direction mounts whereas along y-direction depreciates for incrementing values of stretching ratio parameter. Moreover, it is also elucidated that non-linearity index tends to decrement the velocity and thermal distributions of fluid flow. Keywords: MHD flow, Williamson fluid, Variable thermal conductivity, Heat absorption/generation, Bidirectional non-linear stretching

  8. Effects on heat transfer of multiphase magnetic fluid due to circular magnetic field over a stretching surface with heat source/sink and thermal radiation

    Directory of Open Access Journals (Sweden)

    A. Zeeshan

    Full Text Available The purpose of the current article is to explore the boundary layer heat transport flow of multiphase magnetic fluid with solid impurities suspended homogeneously past a stretching sheet under the impact of circular magnetic field. Thermal radiation effects are also taken in account. The equations describing the flow of dust particles in fluid along with point dipole are modelled by employing conservation laws of mass, momentum and energy, which are then converted into non-linear coupled differential equations by mean of similarity approach. The transformed ODE’s are tackled numerically with the help of efficient Runga-Kutta method. The influence of ferromagnetic interaction parameter, viscous dissipation, fluid-particle interaction parameter, Eckert number, Prandtl number, thermal radiation parameter and number of dust particles, heat production or absorption parameter with the two thermal process namely, prescribed heat flux (PHF or prescribed surface temperature (PST are observed on temperature and velocity profiles. The value of skin-friction coefficient and Nusselt number are calculated for numerous physical parameters. Present results are correlated with available for a limited case and an excellent agreement is found. Keywords: Ferromagnetic interaction parameter, Dusty magnetic fluid, stretching sheet, Magnetic dipole, Heat source/sink, Thermal radiation

  9. Adolescent Idiopathic Scoliosis – case report of a patient with clinical deterioration after surgery

    Directory of Open Access Journals (Sweden)

    Weiss Hans-Rudolf

    2007-12-01

    Full Text Available Abstract Background Although there is no evidence that the long-term effects of scoliosis surgery are superior to the long-term effects of Adolescent Idiopathic Scoliosis (AIS itself, patients can fear the consequences of not under going this surgery due to incorrect or insufficient information. The main indication for surgical treatment in patients with AIS, is cosmetic. However spinal surgery may, along with other negative side effects, actually cause postoperative clinical deterioration. This complication of surgery has not yet been described in international literature. Case presentation A 15-year old female patient originally presenting with a well-compensated double curve pattern scoliosis. The patient was advised to undergo surgery due to the long-term negative impact of signs and symptoms of scoliosis upon her health. The patient agreed to surgery, which was performed in one of Germanys leading centres for spinal surgery. The thoracolumbar curve was corrected and fused, while the thoracic curve, clearly showing wedged vertebrae, defined as structural scoliosis, remained untreated. This operation left the patient with an unbalanced appearance, with radiological and clinical imbalance to the right. The clinical appearance of the patient though clearly deteriorated post-surgery. Furthermore, the wedged disc space below the fusion area indicates future problems with possible destabilisation accompanied probably by low back pain. Conclusion Scoliosis surgery for patients with AIS is mainly indicated for cosmetic or psychological reasons. Therefore the treatment leading to the best possible clinical appearance and balance has to be chosen. Patients should be informed that surgery will not necessarily improve their health status. Clinical deterioration after surgery may occur, and such information is crucial for an adequate informed consent.

  10. Seed deterioration in flooded agricultural fields during winter

    Science.gov (United States)

    Nelms, C.O.; Twedt, D.J.

    1996-01-01

    We determined rate of seed deterioration for 3 crops (corn, rice, and soybean) and 8 weeds commonly found in agricultural fields and moist-soil management units in the Mississippi Alluvial Valley (MAV). The weeds were broadleaf signalgrass (Brachiaria platyphylla), junglerice barnyardgrass (Echinochloa colonum), morningglory (Ipomoea sp.), panic grass (Panicum sp.), bull paspalum (Paspalum boscianum), red rice (Oryza sativa), hemp sesbania (Sesbania exaltata), and bristlegrass (Setaria sp.). Weed seeds, except morningglory, deteriorated slower than corn and soybean, whereas rice decomposed slower than all weed seeds except red rice and bull paspalum. For land managers desiring to provide plant food for wintering waterfowl, rice is clearly the most persistent small grain crop in the MAV. Persistence of weed seeds under flooded conditions throughout winter makes them a cost-effective alternative to traditional crops on land managed for waterfowl.

  11. Tension Pneumocephalus with Diplegia and Deterioration of Consciousness

    Directory of Open Access Journals (Sweden)

    Harald Prüss

    2011-02-01

    Full Text Available Tension pneumocephalus results from intracranial air under pressure as a rare complication after head injury or craniofacial surgery. A 58-year-old man underwent ethmoid sinus surgery and subsequently developed rapidly progressive global headache, restlessness, diplegia with sensory loss, and deterioration of the conscious level. A head CT demonstrated extensive pneumocephalus with gross compression of the brain. The frontal retention of air caused widening of the interhemispheric fissure leading to a peaked appearance of the frontal poles, referred to as the ‘Mount Fuji sign’. Surgical revision of a dural air leak resulted in rapid improvement and full clinical resolution. Early diagnosis of tension pneumocephalus and emergent surgical treatment are crucial to prevent life-threatening deterioration.

  12. Tension pneumocephalus with diplegia and deterioration of consciousness.

    Science.gov (United States)

    Prüss, Harald; Klingebiel, Randolf; Endres, Matthias

    2011-02-14

    Tension pneumocephalus results from intracranial air under pressure as a rare complication after head injury or craniofacial surgery. A 58-year-old man underwent ethmoid sinus surgery and subsequently developed rapidly progressive global headache, restlessness, diplegia with sensory loss, and deterioration of the conscious level. A head CT demonstrated extensive pneumocephalus with gross compression of the brain. The frontal retention of air caused widening of the interhemispheric fissure leading to a peaked appearance of the frontal poles, referred to as the 'Mount Fuji sign'. Surgical revision of a dural air leak resulted in rapid improvement and full clinical resolution. Early diagnosis of tension pneumocephalus and emergent surgical treatment are crucial to prevent life-threatening deterioration.

  13. The establishment of a method for evaluating the long-term water-tightness durability of underground concrete structure taking into account some deteriorations

    International Nuclear Information System (INIS)

    Hironaga, Michihiko; Kawanishi, Motoi

    1996-01-01

    To establish a method of evaluating the long-term water-tightness durability of underground concrete structures, the authors firstly studied a deterioration evaluation model to express the deterioration condition of concrete structures and constructed, on the basis of this model, a function evaluation model to estimate the lowering of functions due to deterioration, consequently indicating a 'concept for evaluating the deterioration and functions of concrete structures' which will make it possible to perform the functional evaluation of concrete structures. Based on this concept, the authors then discusses a technique for evaluating the long-term water-tightness durability of underground concrete structures, specifically indicating the technique by means of illustrations. (author)

  14. Optimal control of decoupling point with deteriorating items

    Directory of Open Access Journals (Sweden)

    Kuan Yang

    2014-10-01

    Full Text Available Purpose: The aim of this paper is to develop a dynamic model to simultaneously determine the optimal position of the decoupling point and the optimal path of the production rate as well as the inventory level in a supply chain. With the objective to minimize the total cost of the deviation from the target setting, the closed forms of the optimal solution are derived over a finite planning horizon with deterioration rate under time-varying demand rate.Design/methodology/approach: The Pontryagin's Maximum Principle is employed to explore the optimal position of decoupling point and the optimal production and inventory rate for the proposed dynamic models. The performances of parameters are illustrated through analytical and numerical approaches.Findings: The results denote that the optimal production rate and inventory level are closely related to the target setting which are highly dependent on production policy; meanwhile the optimal decoupling point is exist and unique with the fluctuating of deteriorating rate and product life cycle. The further analyses through both mathematic and numerical approaches indicate that the shorten of product life cycle shifts the optimal decoupling point forward to the end customer meanwhile a backward shifting appears when the deterioration rate increase.Research limitations/implications: There is no shortage allowed and the replacement policy is not taken into account.Practical implications: Solutions derived from this study of the optimal production-inventory plan and decoupling point are instructive for operation decision making. The obtained knowledge about the performance of different parameters is critical to deteriorating supply chains management.Originality/value: Many previous models of the production-inventory problem are only focused on the cost. The paper introduces the decoupling point control into the production and inventory problem such that a critical element-customer demand, can be taken into

  15. Risk-Based Decision Making for Deterioration Processes Using POMDP

    DEFF Research Database (Denmark)

    Nielsen, Jannie Sønderkær; Sørensen, John Dalsgaard

    2015-01-01

    This paper proposes a method for risk-based decision making for maintenance of deteriorating components, based on the partially observable Markov decision process (POMDP). Unlike most methods, the decision polices do not need to be stationary and can vary according to seasons and near the end...... of the lifetime. The approach is demonstrated through two examples, and the total expected costs are similar to those of another efficient method....

  16. Film with anthocyanins as an indicator of chilled pork deterioration

    Directory of Open Access Journals (Sweden)

    Luana Baptista Golasz

    2013-02-01

    Full Text Available An indicator can be defined as a substance which indicates the presence or absence of another substance or the degree of a certain reaction through characteristic changes, especially color. Therefore, the aim of this work is to evaluate the performance of a bio-based film with anthocyanin as an indicator of chilled pork deterioration. A film made of cassava starch, glycerol, and grape anthocyanins was prepared using the casting technique. Pork loin samples were put in Petri dishes containing an anthocyanin film on the bottom and stored at 4 ºC. Psychrotrophic microorganism count and the pH of the pork loin samples were analyzed for a 14 day- period. At the same time, the films were subjected to colorimetric analysis using D65 illuminant and the CIELAB system. Chroma and hue angle data for these films were evaluated by Anova and Dunnett's test. An increase in the microbial population and in the pH was observed over the storage period as result of pork deterioration. Color changes were also identified in the film. However, only at the beginning of the storage period was it possible to establish a correlation between film color and pork deterioration. The shelf life end-point could not be clearly detected by the film.

  17. Radiation deterioration of several aromatic polymers under oxidative conditions

    International Nuclear Information System (INIS)

    Sasuga, Tsuneo; Hagiwara, Miyuki

    1987-01-01

    Radiation-induced oxidative irradiation effects (with γ-rays under oxygen pressure) or poly(aryl sulphones) (U-PS and PES), poly(aryl ester) (U-Polymer), poly(aryl amide) (A-Film) and poly(aryl ether ether ketone) (PEEK) have been studied based on changes in tensile properties. The deterioration dose estimated from the decrease in the elongation at break was as low as one-fifth to one-tenth of that in high-dose-rate electron-beam irradiation, but the order of radiation resistance of the polymers did not differ from that in electron-beam irradiation, i.e. PEEK > A-Film > U-Polymer > U-PS > PES. The radiation stability of aromatic units under oxidative conditions was estimated from a comparison of the radiation resistance of the polymers themselves and their chemical structures. The following order was obtained: diphenyl ether, diphenyl ketone > aromatic amide>> bisphenol A > diphenyl sulphone. The deterioration mechanism of PEEK under oxidative irradiation was studied by measuring dynamic viscoelastic properties. It was concluded that deterioration in mechanical properties under oxidative irradiation was brought about by chain scission only. (author)

  18. TSEE from Fe-Cr alloy system and its application to the estimation of gasoline deterioration

    International Nuclear Information System (INIS)

    Shimada, H.; Nakajima, K.

    1983-01-01

    The exoelectron glow curves for oxide surface on Fe-Cr alloy were measured as a function of Cr content. It was seen that with increasing Cr content the total counts of thermally stimulated exoelectron emission (TSEE), threshold temperature for measuring the glow curve (starting temperature of the glow curve) and the activation energy clearly indicate a good coincidence with the oxidation process of the surface. The interaction of Fe-Cr alloy with gasoline was examined by applying the test for the oxidation induced period (ASTM D525). The induction period became minimum at about 4%Cr, and the deposit of gasoline gum was maximum at its composition. The results were compared with that of TSEE, and it was found that the catalytic effect of Fe-Cr alloy on the deterioration of gasoline is explained from the starting temperature of the glow curves. (author)

  19. Deterioration of Neurobehavioral Performance in Resident Physicians During Repeated Exposure to Extended Duration Work Shifts

    Science.gov (United States)

    Anderson, Clare; Sullivan, Jason P.; Flynn-Evans, Erin E.; Cade, Brian E.; Czeisler, Charles A.; Lockley, Steven W.

    2012-01-01

    Study Objectives: Although acute sleep loss during 24- to 30-h extended duration work shifts (EDWS) has been shown to impair the performance of resident physicians, little is known about the effects of cumulative sleep deficiency on performance during residency training. Chronic sleep restriction induces a gradual degradation of neurobehavioral performance and exacerbates the effects of acute sleep loss in the laboratory, yet the extent to which this occurs under real-world conditions is unknown. In this study, the authors quantify the time course of neurobehavioral deterioration due to repeated exposure to EDWS during a 3-week residency rotation. Design: A prospective, repeated-measures, within-subject design. Setting: Medical and cardiac intensive care units, Brigham and Women's Hospital, Boston, MA. Participants: Thirty-four postgraduate year one resident physicians (23 males; age 28.0 ± 1.83 (standard deviation) years) Measurements and Results: Residents working a 3-week Q3 schedule (24- to 30-h work shift starts every 3rd day), consisting of alternating 24- to 30-h (EDWS) and approximately 8-h shifts, underwent psychomotor vigilance testing before, during, and after each work shift. Mean response time, number of lapses, and slowest 10% of responses were calculated for each test. Residents also maintained daily sleep/wake/work logs. EDWS resulted in cumulative sleep deficiency over the 21-day rotation (6.3 h sleep obtained per day; average 2.3 h sleep obtained per extended shift). Response times deteriorated over a single 24- to 30-h shift (P Cade BE; Czeisler CA; Lockley SW. Deterioration of neurobehavioral performance in resident physicians during repeated exposure to extended duration work shifts. SLEEP 2012;35(8):1137-1146. PMID:22851809

  20. Design Of A Laboratory Set-up For Evaluating Structural Strength Of Deteriorated Concrete Sewer Pipes

    NARCIS (Netherlands)

    Stanic, N.; Salet, T.; Langeveld, J.G.; Clemens, F.H.L.R.

    2014-01-01

    The principle of structural behaviour of buried concrete pipes is fairly understood, except for how material deterioration affects structural behaviour and performance. Consequently, information on the structural behaviour of deteriorated sewer pipes will contribute to better understanding of the

  1. Breaking object correspondence across saccadic eye movements deteriorates object recognition

    Directory of Open Access Journals (Sweden)

    Christian H. Poth

    2015-12-01

    Full Text Available Visual perception is based on information processing during periods of eye fixations that are interrupted by fast saccadic eye movements. The ability to sample and relate information on task-relevant objects across fixations implies that correspondence between presaccadic and postsaccadic objects is established. Postsaccadic object information usually updates and overwrites information on the corresponding presaccadic object. The presaccadic object representation is then lost. In contrast, the presaccadic object is conserved when object correspondence is broken. This helps transsaccadic memory but it may impose attentional costs on object recognition. Therefore, we investigated how breaking object correspondence across the saccade affects postsaccadic object recognition. In Experiment 1, object correspondence was broken by a brief postsaccadic blank screen. Observers made a saccade to a peripheral object which was displaced during the saccade. This object reappeared either immediately after the saccade or after the blank screen. Within the postsaccadic object, a letter was briefly presented (terminated by a mask. Observers reported displacement direction and letter identity in different blocks. Breaking object correspondence by blanking improved displacement identification but deteriorated postsaccadic letter recognition. In Experiment 2, object correspondence was broken by changing the object’s contrast-polarity. There were no object displacements and observers only reported letter identity. Again, breaking object correspondence deteriorated postsaccadic letter recognition. These findings identify transsaccadic object correspondence as a key determinant of object recognition across the saccade. This is in line with the recent hypothesis that breaking object correspondence results in separate representations of presaccadic and postsaccadic objects which then compete for limited attentional processing resources (Schneider, 2013. Postsaccadic

  2. Entrepreneurial Behaviour in Periods of Deterioration of Small Firms' Condition

    Directory of Open Access Journals (Sweden)

    Jarosław Ropęga

    2016-06-01

    Full Text Available Objective: The aim of the paper is to indicate types of entrepreneurial behaviour which should be triggered during periods of deterioration of small firms' condition. Research Design & Methods: The study concerned the causes and symptoms of economic failure identified along the trajectories of this phenomenon. The paper uses selected parts of the study related to the non-occurrence of entrepreneurial behaviour or errors in this behaviour identified in the surveyedfirms. The entire study was conducted based on the analysis of 32 case studies carried out among the former entrepreneurs  of  micro  and  small  firms  liquidated  in  the  period  from  01.01.2006  to 31.12.2011. Findings: The  study  helped  to  identify  shortcomings  in  the  entrepreneurial  process along individual trajectories of economic failure of the surveyed companies. Implications & Recommendations: As  a  result  of  the  conscious  entrepreneurial  process, small firms have the opportunity to leave the trajectory of economic failure, indicated by the deteriorating condition of the company.  It is therefore necessary to develop knowledge concerning the entrepreneurial processand entrepreneurship among managers of small firms. Contribution & Value Added: According to the author, one of the key factors affecting the survival of small businesses in the period of deterioration of their condition is the initiation of the entrepreneurial process and/or its deliberate continuation. It seems quite natural to base components of this process on the existing support tools for entrepreneurs that are at risk of economic failure.

  3. 2D-resistivity surveys of deteriorating historic stonework in Oxford, UK

    Science.gov (United States)

    Sass, O.; Viles, H. A.

    2009-04-01

    Historic stonework deteriorates in often very complex ways and despite many years of research on the topic, we are still a long way from being able to predict its occurrence and severity. As most deterioration processes involve water, techniques which provide a better picture of the moisture contents and fluctuations within stonework are very valuable in attempts to improve understanding. 2D resistivity methods can provide useful information about moisture distributions within porous historic stonework. We report on a series of experiments on historic walls within the centre of Oxford, UK, which illustrate varying degrees of deterioration including catastrophic decay. Using medical electrodes we have been able to carry out non-invasive and non-destructive 2D resistivity surveys to study the distribution and amount of water stored in deteriorating limestone walls. Fifteen vertical profiles, each 2-2.5 m in length, have been monitored at five sites. Furthermore, simulated driving rain experiments have been carried out at two sites. The data indicate the diversity and complexity of moisture distributions within these walls. Replacement stone patches show consistently higher moisture conditions than the surrounding stone. Some profiles show wetter sections towards the base of the wall, usually where a plinth is absent. Conversely, hard stone plinths obviously reduce capillary rise from ground water. However, at several sites we noticed a wetter zone immediately above the top of the plinth which often correlates with the occurrence of catastrophic decay - indicating that the plinth may encourage concentration of decay. Most profiles indicate the presence of wetter patches 5-10cm behind the wall face under blackened crusts. Such patches of heightened absolute moisture contents could play a very important role in encouraging catastrophic decay. Severely decayed sections of profiles often exhibit wetter near-surface conditions than surrounding stonework, whilst areas with

  4. Predicting Future Deterioration of Hydraulic Steel Structures with Markov Chain and Multivariate Samples of Statistical Distributions

    Directory of Open Access Journals (Sweden)

    Guillermo A. Riveros

    2014-01-01

    Full Text Available Combined effects of several complex phenomena cause the deterioration of elements of steel hydraulic structures on the nation’s lock systems: loss of protective systems, corrosion, cracking and fatigue, impacts, and overloads. This paper presents examples of deterioration of steel hydraulic structures. A method for predicting future deterioration based on current conditions is also presented. This paper also includes a procedure for developing deterioration curves when condition state data is available.

  5. Development of Improved Mechanistic Deterioration Models for Flexible Pavements

    DEFF Research Database (Denmark)

    Ullidtz, Per; Ertman, Hans Larsen

    1998-01-01

    The paper describes a pilot study in Denmark with the main objective of developing improved mechanistic deterioration models for flexible pavements based on an accelerated full scale test on an instrumented pavement in the Danish Road Tessting Machine. The study was the first in "International...... Pavement Subgrade Performance Study" sponsored by the Federal Highway Administration (FHWA), USA. The paper describes in detail the data analysis and the resulting models for rutting, roughness, and a model for the plastic strain in the subgrade.The reader will get an understanding of the work needed...

  6. Deterioration of hearing in a cochlear implantee with relapsing polychondritis.

    Science.gov (United States)

    Patrizia, Mancini; Giuseppe, Attanasio; Marika, Viccaro; Roberto, Filipo

    2011-06-01

    We report on a rare case of cochlear implantation in a patient affected by relapsing polychondritis (RP), which over time induced cochlear fibrosis/ossification and deterioration of previously excellent hearing performance. The clinical course was determined by CT scan, electrophysiology, and speech perception data. We conclude that RP is a severe autoimmune connective disorder that can cause profound sensorineural hearing loss. Cochlear implantation in these patients can provide excellent performance. Continuation of therapy may improve prognosis, but relapses involving inner ear structures can determine fibrosis/ossification of the modiolus and interfere with cochlear implant use.

  7. Modèle analytique pour la résistance thermique due à des contacts circulaires mobiles multiples à la surface d'un solide revêtu

    Science.gov (United States)

    Baïri, Abderrahmane

    2003-08-01

    The heat transfer at the interface of two solids in sliding/rolling contact depends on the constriction phenomenon which occurs at the vicinity of asperities. In order to study this problem, the micro-contacts are represented by multiple moving circular heat sources on the surface of a body. The studied body is constituted of a substrate and a surface coating. The thermal constriction resistance due to those contacts is determined analytically in this paper. The solution is developed by using the integral Fourier transforms, and it is valid regardless of the velocity and the relative contact size values. To cite this article: A. Baïri, C. R. Mecanique 331 (2003).

  8. Cognitive Deterioration in Adults with Down Syndrome: Effects on the Individual, Caregivers, and Service Use.

    Science.gov (United States)

    Oliver, Chris; Crayton, Lissa; Holland, Anthony; Hall, Scott

    2000-01-01

    Individuals with Down syndrome (n=49) were assigned to three groups: those showing cognitive deterioration, those comparable in age, and those not showing cognitive deterioration but younger. Those experiencing cognitive deterioration were less likely to receive day services, had more impoverished life experiences, and required more support.…

  9. Deterioration of noise-induced hearing loss among bottling factory workers.

    Science.gov (United States)

    Ologe, F E; Olajide, T G; Nwawolo, C C; Oyejola, B A

    2008-08-01

    Repeated exposure to excessive noise will eventually lead to an irreversible increase in hearing thresholds. In theory, the damage reflects both the intensity of the noise and the duration of exposure. This is not linear with respect to duration of exposure; rather, the worker may experience a disproportionate loss in the early years of exposure. A prospective study surveying workers of the production section (i.e. most noise-exposed area) of a bottling factory was carried out in December 2003 and in December 2005. A self-administered questionnaire was used to extract information about worker's demographic characteristics, drug intake, and medical and occupational history, as well as information on the use of hearing protection devices. Noise mapping of the various departments of the factory was carried out. Otological examination, tympanometry and audiometry were also carried out on selected subjects. Eighty-four workers, 76 (90.5 per cent) men and eight (9.5 per cent) women, were studied. Their mean age was 33.0 +/- 7.6 years in 2003 and 35.0 +/- 7.6 years in 2005. The recorded noise levels in the factory production section ranged between 91.5 and 98.7 dBA. The prevalence of sensorineural hearing loss among workers was noted to be 64.9 and 86.9 per cent for test one (2003) and test two (2005), respectively. The degree of hearing deterioration within the two years of this study was 1.0-3.2 dB for the right ear and 1.6-3.4 dB for the left ear. This deterioration was at discrete frequencies. More than half (53.6 per cent) of the workers did not have a hearing protection device. Of the 46.4 per cent who did, only 38.5 per cent claimed to have used it regularly. These findings showed that there was a high prevalence of mild sensorineural hearing loss and significant hearing deterioration among workers, due to exposure to excessive noise over a two-year period. The study demonstrates the practical importance of serial audiometry for noise-exposed workers as a means of

  10. Performance Deterioration of Heavy-Haul Railway Bridges under Fatigue Loading Monitored by a Multisensor System

    Directory of Open Access Journals (Sweden)

    Zhiwu Yu

    2018-01-01

    Full Text Available Heavy-haul railway bridges play an increasingly essential role in the transportation in China due to the increasing transport volume. The performance deterioration of the scale models of a typical heavy-haul railway bridge under fatigue loading is monitored in this work, based on a multisensor system including the fiber-reinforced polymer optical fiber Bragg grating and electrical resistance strain gauges, linear variable displacement transducer, and accelerometer. Specifically, by monitoring/observing on the failure mode, fatigue life, load-midspan deflection response, material strain development, and so forth, this work develops an S-N model by comparing the relationship between fatigue life and rebar stress range with that between fatigue life and load level and proposes a damage evolution model considering the coupling of the stiffness degradation and inelastic deformation of specimens. It is found that the fatigue life of specimens is determined by the fatigue life of the rebar at the bottom and it may be lower than 2.0 million cycles with a 30-ton axle weight when environmental factors are taken into account. The predictions of the models agree well with experimental results. Therefore, this work furthers the understanding of the fatigue performance deterioration of the bridges by using a multisensor system.

  11. Sudden Visual Deterioration as the First Symptom of Chronic Kidney Failure

    Directory of Open Access Journals (Sweden)

    Weronika Pociej-Marciak

    2015-11-01

    Full Text Available Purpose: We report here a unique case of a sudden loss of vision as the first symptom of an advanced chronic nephropathy. Methods and Results: A 25-year-old man was referred to the Department of Ophthalmology with sudden visual deterioration presumptively diagnosed as bilateral retinitis. The patient had never been under any medical care before and had never had any clinical signs of any chronic disease. He underwent an ophthalmic examination with optical coherence tomography (OCT. Based on the clinical features, OCT scans and systemic blood pressure (BP assessment (225/145 mm Hg, the patient was definitely diagnosed with hypertensive retinopathy and choroidopathy due to hypertensive crisis. After urgent diagnostic procedures, the patient was diagnosed with a chronic kidney disease at stage 5 in the course of chronic glomerulonephritis. Immediately, a renal replacement therapy was started and the patient was qualified for renal transplantation. Conclusion: Adolescents with an unclear picture of retinal lesions, who have neither a history nor clinical signs of a systemic disease, should undergo careful systemic screening with BP assessment. A sudden deterioration of vision may be the first symptom of a previously undiagnosed severe systemic disease (very rare chronic that requires immediate treatment.

  12. A comparison between MRI and CT in the investigation of neurological deterioration in longstanding spinal trauma

    International Nuclear Information System (INIS)

    Silberstein, M.; Hennessy, O.; Tress, B.M.

    1992-01-01

    Magnetic Resonance (MR) imaging is now an established technique for imaging the spine, with accurate depiction of the spinal cord, as well as the adjacent soft tissues. However, the cost of this technique, and its as yet limited availability in Australasia, has resulted in the necessity to demonstrate its superiority over other imaging modalities for any specific clinical problem. One of the major areas of impact of MR has been in the investigation of the problem of acute neurological deterioration in patients with past spinal trauma. Some of these patients will have treatable causes of deterioration, either a post-traumatic syrinx, or spinal cord compression, and MR can be used to image these conditions, which, until recently, were investigated with computed tomography with myelographic contrast medium (CTM). MRI at 0.3 T and CTM were compared in the retrospective evaluation of 35 patients investigated for the development of new neurological symptoms following longstanding spinal cord injury. It was concluded that compared with MRI, CTM was relatively accurate for the demonstration of spinal cord compression, but failed to identify 23% of patients with spinal cord atrophy, and 43% of patients with post-traumatic syrinx formation. However, 5 patients had unsatisfactory MR imaging, either due to motion or metallic artifact, and in 3 of these, CTM demonstrated a syrinx. 15 refs., 2 tabs., 5 figs

  13. Detecting Solenoid Valve Deterioration in In-Use Electronic Diesel Fuel Injection Control Systems

    Directory of Open Access Journals (Sweden)

    Chyuan-Yow Tseng

    2010-07-01

    Full Text Available The diesel engine is the main power source for most agricultural vehicles. The control of diesel engine emissions is an important global issue. Fuel injection control systems directly affect fuel efficiency and emissions of diesel engines. Deterioration faults, such as rack deformation, solenoid valve failure, and rack-travel sensor malfunction, are possibly in the fuel injection module of electronic diesel control (EDC systems. Among these faults, solenoid valve failure is most likely to occur for in-use diesel engines. According to the previous studies, this failure is a result of the wear of the plunger and sleeve, based on a long period of usage, lubricant degradation, or engine overheating. Due to the difficulty in identifying solenoid valve deterioration, this study focuses on developing a sensor identification algorithm that can clearly classify the usability of the solenoid valve, without disassembling the fuel pump of an EDC system for in-use agricultural vehicles. A diagnostic algorithm is proposed, including a feedback controller, a parameter identifier, a linear variable differential transformer (LVDT sensor, and a neural network classifier. Experimental results show that the proposed algorithm can accurately identify the usability of solenoid valves.

  14. Detecting solenoid valve deterioration in in-use electronic diesel fuel injection control systems.

    Science.gov (United States)

    Tsai, Hsun-Heng; Tseng, Chyuan-Yow

    2010-01-01

    The diesel engine is the main power source for most agricultural vehicles. The control of diesel engine emissions is an important global issue. Fuel injection control systems directly affect fuel efficiency and emissions of diesel engines. Deterioration faults, such as rack deformation, solenoid valve failure, and rack-travel sensor malfunction, are possibly in the fuel injection module of electronic diesel control (EDC) systems. Among these faults, solenoid valve failure is most likely to occur for in-use diesel engines. According to the previous studies, this failure is a result of the wear of the plunger and sleeve, based on a long period of usage, lubricant degradation, or engine overheating. Due to the difficulty in identifying solenoid valve deterioration, this study focuses on developing a sensor identification algorithm that can clearly classify the usability of the solenoid valve, without disassembling the fuel pump of an EDC system for in-use agricultural vehicles. A diagnostic algorithm is proposed, including a feedback controller, a parameter identifier, a linear variable differential transformer (LVDT) sensor, and a neural network classifier. Experimental results show that the proposed algorithm can accurately identify the usability of solenoid valves.

  15. Novel types of anti-ecloud surfaces

    CERN Document Server

    Montero, I; Dávila, M E; Nistor, V; Galán, L; González, L A; Raboso, D; Costa Pinto, P; Taborelli, M; Caspers, F; Ulrich, U; Wolk, D

    2013-01-01

    In high power RF devices for space, secondary electron emission appears as the main parameter governing the multipactor effect and as well as the e-cloud in large accelerators. Critical experimental activities included development of coatings with low secondary electron emission yield (SEY) for steel (large accelerators) and aluminium (space applications). Coatings with surface roughness of high aspect ratio producing the so-call secondary emission suppression effect appear as the selected strategy. In this work a detailed study of the SEY of these technological coatings and also the experimental deposition methods (PVD and electrochemical) are presented. The coating-design approach selected for new low SEY coatings include rough metals (Ag, Au, Al), rough alloys (NEG), particulated and magnetized surfaces, and also graphene like coatings. It was found that surface roughness also mitigate the SEY deterioration due to aging processes.

  16. Quantitative determination of BAF312, a S1P-R modulator, in human urine by LC-MS/MS: prevention and recovery of lost analyte due to container surface adsorption.

    Science.gov (United States)

    Li, Wenkui; Luo, Suyi; Smith, Harold T; Tse, Francis L S

    2010-02-15

    Analyte loss due to non-specific binding, especially container surface adsorption, is not uncommon in the quantitative analysis of urine samples. In developing a sensitive LC-MS/MS method for the determination of a drug candidate, BAF312, in human urine, a simple procedure was outlined for identification, confirmation and prevention of analyte non-specific binding to a container surface and to recover the 'non-specific loss' of an analyte, if no transfer has occurred to the original urine samples. Non-specific binding or container surface adsorption can be quickly identified by using freshly spiked urine calibration standards and pre-pooled QC samples during a LC-MS/MS feasibility run. The resulting low recovery of an analyte in urine samples can be prevented through the use of additives, such as the non-ionic surfactant Tween-80, CHAPS and others, to the container prior to urine sample collection. If the urine samples have not been transferred from the bulk container, the 'non-specific binding' of an analyte to the container surface can be reversed by the addition of a specified amount of CHAPS, Tween-80 or bovine serum albumin, followed by appropriate mixing. Among the above agents, Tween-80 is the most cost-effective. beta-cyclodextrin may be suitable in stabilizing the analyte of interest in urine via pre-treating the matrix with the agent. However, post-addition of beta-cyclodextrin to untreated urine samples does not recover the 'lost' analyte due to non-specific binding or container surface adsorption. In the case of BAF312, a dynamic range of 0.0200-20.0 ng/ml in human urine was validated with an overall accuracy and precision for QC sample results ranging from -3.2 to 5.1% (bias) and 3.9 to 10.2% (CV), respectively. Pre- and post-addition of 0.5% (v/v) Tween-80 to the container provided excellent overall analyte recovery and minimal MS signal suppression when a liquid-liquid extraction in combination with an isocratic LC separation was employed. The

  17. Credit financing for deteriorating imperfect quality items with allowable shortages

    Directory of Open Access Journals (Sweden)

    Aditi Khanna

    2016-01-01

    Full Text Available The outset of new technologies, systems and applications in manufacturing sector has no doubt lighten up our workload, yet the chance causes of variation in production system cannot be eliminated completely. Every produced/ordered lot may have some fraction of defectives which may vary from process to process. In addition the situation is more susceptible when the items are deteriorating in nature. However, the defective items can be secluded from the good quality lot through a careful inspection process. Thus, a screening process is obligatory in today’s technology driven industry which has the customer satisfaction as its only motto. Moreover, in order to survive in the current global markets, credit financing has been proven a very influential promotional tool to attract new customers and a good inducement policy for the retailers. Keeping this scenario in mind, the present paper investigates an inventory model for a retailer dealing with imperfect quality deteriorating items under permissible delay in payments. Shortages are allowed and fully backlogged. This model jointly optimizes the order quantity and shortages by maximizing the expected total profit. A mathematical model is developed to depict this scenario. Results have been validated with the help of numerical example. Comprehensive sensitivity analysis has also been presented.

  18. Deteriorating ischaemic stroke. cytokines, soluble cytokine receptors, ferritin, systemic blood pressure, body temperature, blood glucose, diabetes, stroke severity, and CT infarction-volume as predictors of deteriorating ischaemic stroke

    DEFF Research Database (Denmark)

    Christensen, Hanne; Boysen, Gudrun; Johannesen, Helle Hjorth

    2002-01-01

    Although the causes of neurological deterioration in acute cerebral infarction have not yet been identified, many variables have been associated with deterioration. The aim of this study was to investigate deteriorating ischaemic stroke....

  19. The Deterioration Mechanism of Diester Aero Lubricating Oil at High Temperature

    Directory of Open Access Journals (Sweden)

    Ting Yao

    2017-01-01

    Full Text Available The deterioration of aero lubricating oil at high temperatures was accelerated by using a specific device simulating the operating conditions of engines, where the deterioration mechanism was obtained. Structures of the deteriorated lubricating oils were analyzed by gas chromatograph/mass spectrometer. From the results, it can be concluded that deterioration of aero lubricating oil at high temperatures was composed of thermal pyrolysis, oxidation, and polymerization, with the generation of a variety of products, such as alcohols, aldehydes, acids, and esters, which caused the deterioration of physicochemical properties of the aero lubricating oil.

  20. No deterioration elemental analysis with in-air submilli-PIXE camera

    International Nuclear Information System (INIS)

    Matsuyama, S.; Ishii, K.; Yamazaki, H.

    1999-01-01

    Elemental images of rice leaves with lesion parts were taken with an in-air submilli-PIXE camera at Tohoku University. The rice leaves were analyzed in vivo and it resulted that the elements of Ca and Mn are accumulated in the lesion parts. It was confirmed by checking the intactness of cells that the living leaves were not seriously damaged. The surface of japan bowls (the Edo period), Japanese vessels (Shigaraki wares, the Edo period) and wooden tablets (the Meiji period) were directly surveyed by submilli-beams (3 MeV protons). Japanese vessels and wooden tablets were not discolored by the beam irradiation. Shigaraki vessels were discolored first, but their color disappeared after 10 days from the irradiation. It is concluded that such samples are not seriously deteriorated in in-air PIXE analysis. (author)

  1. Reliability assessment of aging structures subjected to gradual and shock deteriorations

    International Nuclear Information System (INIS)

    Wang, Cao; Zhang, Hao; Li, Quanwang

    2017-01-01

    Civil structures and infrastructure facilities are susceptible to deterioration posed by the effects of natural hazards and aggressive environmental conditions. These factors may increase the risk of service interruption of infrastructures, and should be taken into account when assessing the structural reliability during an infrastructure's service life. Modeling the resistance deterioration process reasonably is the basis for structural reliability analysis. In this paper, a novel model is developed for describing the deterioration of aging structures. The deterioration is a combination of two stochastic processes: the gradual deterioration posed by environmental effects and the shock deterioration caused by severe load attacks. The dependency of the deterioration magnitude on the load intensity is considered. The Gaussian copula function is employed to help construct the joint distribution of correlated random variables. Semi-analytical methods are developed to assess the structural failure time and the number of significant load events (shocks) to failure. Illustrative examples are presented to demonstrate the applicability of the proposed model in structural reliability analysis. Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability. - Highlights: • A new resistance deterioration model for aging structures is proposed. • Time-dependent reliability analysis methods incorporating the proposed deterioration model are developed. • Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability.

  2. Emissions deterioration for three alternative fuel vehicle types: Natural gas, ethanol, and methanol vehicles

    International Nuclear Information System (INIS)

    Winebrake, J.J.; Deaton, M.L.

    1997-01-01

    Although there have been several studies examining emissions from in-use alternative fuel vehicles (AFVs), little is known about the deterioration of these emissions over vehicle lifetimes and how this deterioration compares with deterioration from conventional vehicles (CVs). This paper analyzes emissions data from 70 AFVs and 70 CVs operating in the federal government fleet to determine whether AFV emissions deterioration differs significantly from CV emissions deterioration. The authors conduct the analysis on three alternative fuel types (natural gas, methanol, and ethanol) and on five pollutants (carbon monoxide, carbon dioxide, total hydrocarbons, non-methane hydrocarbons, and nitrogen oxides). They find that for most cases they studied, deterioration differences are not statistically significant; however, several exceptions suggest that air quality planners and regulators must further analyze AFV emissions deterioration in order to properly include these technologies into broader air quality management schemes

  3. Selective sandstone deterioration in the cathedrals of Salamanca, Textural anisotropy as a cause

    Directory of Open Access Journals (Sweden)

    Martín Patino, María Teresa

    1994-09-01

    Full Text Available Textural sandstone anisotropy is related to the selective deterioration of such stone in buildings. The samples studied come from the Cathedrals of Salamanca. Stone fragments, cut in different directions with regard to the base supporting the ashlars in the wall, are studied by means of a binocular magnifying glass and the Scanning Electron Microscopy (SEM. This shows that the sandstone microfabric has a granular and a laminar microtexture, which correspond to different directions in the plane in question as regards the position of the ashlar. Either of these circumstances coincides with the stone surface on the outside of the building and affect its surface deterioration in a different way. The SEM images of deteriorated stone were compared with those of unaffected stone, with both types coming from differently orientated cuts as regards the position of the ashlar. In conclusion, the position given to the block of stone in the building is of importance for the preservation of the stone. The speed of ultrasound transmission measured in samples from commercial quarries confirms the textural sandstone anisotropy to a greater or lesser extent.

    La anisotropía textural de las areniscas se relaciona con la selectividad de su deterioro en los edificios. Las muestras estudiadas pertenecen a las Catedrales de Salamanca. Fragmentos de piedra, cortados en direcciones diferentes respecto a la base sobre la que se asientan los sillares en el muro, son estudiados por medio de la lupa binocular y del microscopio electrónico de barrido (SEM. De éstos se deduce que la microfábrica de las areniscas tiene una microtextura granular y otra laminar, que corresponden a direcciones diferentes del plano respecto al asiento del sillar. Una u otra de estas situaciones coincide con la superficie de la piedra expuesta al exterior en el edificio, y afectan a su deterioro superficial de forma diferente. Las capas externas en las que predomina la arcilla

  4. Age group analysis of psychological, physical and functional deterioration in patients hospitalized for pneumonia.

    Science.gov (United States)

    Martín-Salvador, Adelina; Torres-Sánchez, Irene; Sáez-Roca, Germán; López-Torres, Isabel; Rodríguez-Alzueta, Elisabeth; Valenza, Marie Carmen

    2015-10-01

    Hospital admissions due to pneumonia range from 1.1 to 4 per 1,000 patients and this figure increases with age. Hospitalization causes a decline in functional status. Physical impairment impedes recovery and constitutes a higher risk of disability and mortality in elderly people. The objective of this study is to assess the impact of hospital stay in patients with pneumonia related with age. A total of 116 patients with pneumonia were included in this study, and divided into two age groups:psychological and emotional profile were evaluated. Pneumonia severity, nutritional status, independence and comorbidities were also assessed. Statistical analyses revealed significant differences between both age groups in pneumonia severity and comorbidities. Significant improvements between admission and discharge were found in lung function in both groups (pgroup. Hospitalization leads to a significant physical impairment in patients admitted for pneumonia. This deterioration increases with age. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.

  5. A New Technique for the Digitization and Restoration of Deteriorated Photographic Negatives

    Directory of Open Access Journals (Sweden)

    W. Brent Seales

    2009-01-01

    Full Text Available This work describes the development and analysis of a new image-based photonegative restoration system. Deteriorated acetate-based safety negatives are complex objects due to the separation and channeling of their multiple layers that has often occurred over 70 years time. Using single-scatter diffuse transmission model, the intrinsic intensity information and shape distortion of film can be modeled. A combination of structured-light and high-dynamic range imaging is used to acquire the data which allows for automatic photometric and geometric correction of the negatives. This is done with a simple-to-deploy and cost-effective camera and LCD system that are already available to most libraries and museums. An initial analysis is provided to show the accuracy of this method and promising results of restoration of actual negatives from a special archive collection are then produced.

  6. A condition-based maintenance policy for stochastically deteriorating systems

    International Nuclear Information System (INIS)

    Grall, A.; Berenguer, C.; Dieulle, L.

    2002-01-01

    We focus on the analytical modeling of a condition-based inspection/replacement policy for a stochastically and continuously deteriorating single-unit system. We consider both the replacement threshold and the inspection schedule as decision variables for this maintenance problem and we propose to implement the maintenance policy using a multi-level control-limit rule. In order to assess the performance of the proposed maintenance policy and to minimize the long run expected maintenance cost per unit time, a mathematical model for the maintained system cost is derived, supported by the existence of a stationary law for the maintained system state. Numerical experiments illustrate the performance of the proposed policy and confirm that the maintenance cost rate on an infinite horizon can be minimized by a joint optimization of the maintenance structure thresholds, or equivalently by a joint optimization of a system replacement threshold and the aperiodic inspection schedule

  7. Managing dual warehouses with an incentive policy for deteriorating items

    Science.gov (United States)

    Yu, Jonas C. P.; Wang, Kung-Jeng; Lin, Yu-Siang

    2016-02-01

    Distributors in a supply chain usually limit their own warehouse in finite capacity for cost reduction and excess stock is held in a rent warehouse. In this study, we examine inventory control for deteriorating items in a two-warehouse setting. Assuming that there is an incentive offered by a rent warehouse that allows the rental fee to decrease over time, the objective of this study is to maximise the joint profit of the manufacturer and the distributor. An optimisation procedure is developed to derive the optimal joint economic lot size policy. Several criteria are identified to select the most appropriate warehouse configuration and inventory policy on the basis of storage duration of materials in a rent warehouse. Sensitivity analysis is done to examine the results of model robustness. The proposed model enables a manufacturer with a channel distributor to coordinate the use of alternative warehouses, and to maximise the joint profit of the manufacturer and the distributor.

  8. [Infant feeding practices and deterioration of breastfeeding in Mexico].

    Science.gov (United States)

    González de Cosío, Teresita; Escobar-Zaragoza, Leticia; González-Castell, Luz Dinorah; Rivera-Dommarco, Juan Ángel

    2013-01-01

    To present data on infant and young child feeding practices (IYCFP) in Mexico from the 2012 National Health and Nutrition Survey (ENSANUT 2012) to support the development of public policy. Women 12-49y and children <2y. Indicators of IYCFP suggested by WHO were analyzed by geographic, socioeconomic, participation in food programs and health insurance variables. Median duration of breast-feeding: 10.2mo and 14.4% with exclusive breastfeeding (EBF) <6m. Breastfeeding deteriorated in most vulnerable groups. Decline in EBF<6m 2006-2012 was explained by increases in consumption of formula and other milks (4%) and water (4%). Three-quarters (74%) of 6-11mo infants had minimum food diversity, and it was lower in the most vulnerable. Complementary feeding improved but breastfeeding declined in Mexico. Promotion actions must be integral, coordinated, financed and evaluated, with Federal government leadership and should include the participation of various stakeholders.

  9. Oxidative flavour deterioration of fish oil enriched milk

    DEFF Research Database (Denmark)

    Bruni Let, Mette; Jacobsen, Charlotte; Frankel, E.N.

    2003-01-01

    -% of n-3 fatty acids) and one with cod liver oil (26 wt-% of n-3 fatty acids). The effect of added calcium disodium ethylenediaminetetraacetate (EDTA) on oxidation was also investigated. Emulsions based on cod liver oil with a slightly elevated peroxide value (1.5 meq/kg) oxidised significantly faster......The oxidative deterioration of milk emulsions supplemented with 1.5 wt-% fish oil was investigated by sensory evaluation and by determining the peroxide value and volatile oxidation products after cold storage. Two types of milk emulsions were produced, one with a highly unsaturated tuna oil (38 wt...... than the tuna oil emulsions, having a lower initial peroxide value (0.1 meq/kg). In the tuna oil emulsions the fishy off-flavour could not be detected throughout the storage period. Addition of 5-50 ppm EDTA significantly reduced the development of volatile oxidation products in the cod liver oil...

  10. Robust anger: recognition of deteriorated dynamic bodily emotion expressions.

    Science.gov (United States)

    Visch, Valentijn T; Goudbeek, Martijn B; Mortillaro, Marcello

    2014-01-01

    In two studies, the robustness of anger recognition of bodily expressions is tested. In the first study, video recordings of an actor expressing four distinct emotions (anger, despair, fear, and joy) were structurally manipulated as to image impairment and body segmentation. The results show that anger recognition is more robust than other emotions to image impairment and to body segmentation. Moreover, the study showed that arms expressing anger were more robustly recognised than arms expressing other emotions. Study 2 added face blurring as a variable to the bodily expressions and showed that it decreased accurate emotion recognition-but more for recognition of joy and despair than for anger and fear. In sum, the paper indicates the robustness of anger recognition in multileveled deteriorated bodily expressions.

  11. Cognitive Deterioration in Moderate and Severe Hypobaric Hypoxia Conditions.

    Science.gov (United States)

    Beer, Jeremy M A; Shender, Barry S; Chauvin, Daren; Dart, Todd S; Fischer, Joseph

    2017-07-01

    Hypoxia continues to present risks in military aviation. Hypoxia symptoms include sensory and cognitive effects; of these, it is important to identify which components of operator performance are most vulnerable to hypoxia-induced decline in order to determine which sensory modality is most effective for alerting an impaired aviator of an imminent hypoxic episode. A study was performed in a hypobaric chamber to characterize deterioration of cognitive performance under moderate (MH) and severe (SH) hypoxia conditions, culminating in subjects' inability to perform tasks. Subjects operated a synthetic workstation, performing multiple simultaneous tasks during hypobaric exposures equivalent to 5486 m (18,000 ft) MH and 7620 m (25,000 ft) SH ascents. Performance was compared across baseline, altitude exposure, and recovery periods within MH vs. SH altitude profiles. Ascents lasted until at least one of a list of termination criteria was met, at which point the chamber was returned to ground level pressure and the subject resumed workstation performance during recovery. SH conditions generated greater deficits than MH conditions, and these more severe effects hastened the termination of exposures (5 vs. 18 min mean duration, respectively). Workstation performance collapsed rapidly on SH exposure, with Mathematics and Auditory Monitoring tasks proving vulnerable to breakdown. In MH exposures, these tasks exhibited impaired accuracy (declining 11% and 9%, respectively) and speed, with declines in Auditory Monitoring lingering into recovery. The relative robustness of memory and visual monitoring vs. the vulnerability of mathematical and auditory processing suggest that care should be taken designing purely auditory cockpit hypoxia warning alerts.Beer JMA, Shender BS, Chauvin D, Dart TS, Fischer J. Cognitive deterioration in moderate and severe hypobaric hypoxia conditions. Aerosp Med Hum Perform. 2017; 88(7):617-626.

  12. Rock as a construction material: durability, deterioration and conservation

    Directory of Open Access Journals (Sweden)

    Esbert, Rosa M.ª

    1991-03-01

    Full Text Available The different aspects related to the deterioration and conservation of stone, used as a construction material, are reviewed in this article. The petrographical characteristics and physical properties which control the durability of stone material are stated. The importance of the voids and the properties more directly linked to the up-taking and transfer of humidity through the stone are pointed out. Regarding to the deterioration processes, the role of water, soluble salts and atmospheric pollutants upon the different alteration mechanisms of the building stones is emphasized. Finally, the steps related to the stone conservation, and the methods and products more currently employed to that aim are revised.

    Se compendian los distintos aspectos relacionados con el deterioro y la conservación de la piedra utilizada como material de edificación. Se revisan las características petrográficas y propiedades físicas que controlan la durabilidad de los materiales pétreos, resaltando la importancia de los espacios vacíos y de aquellas propiedades más directamente relacionadas con la captación y transferencia de humedad por el interior de la piedra. En cuanto a los procesos de deterioro se destaca el papel del agua, de las sales solubles y de los contaminantes atmosféricos en los diversos mecanismos de alteración desarrollados en la piedra de edificación. Finalmente se plantean las diversas fases relacionadas con la conservación de la piedra, y se revisan los métodos y productos más empleados en la actualidad para tal fin.

  13. Non-deteriorating time domain numerical algorithms for Maxwell's electrodynamics

    Science.gov (United States)

    Petropavlovsky, S.; Tsynkov, S.

    2017-05-01

    The Huygens' principle and lacunae can help construct efficient far-field closures for the numerical simulation of unsteady waves propagating over unbounded regions. Those closures can be either standalone or combined with other techniques for the treatment of artificial outer boundaries. A standalone lacunae-based closure can be thought of as a special artificial boundary condition (ABC) that is provably free from any error associated with the domain truncation. If combined with a different type of ABC or a perfectly matched layer (PML), a lacunae-based approach can help remove any long-time deterioration (e.g., instability) that arises at the outer boundary regardless of why it occurs in the first place. A specific difficulty associated with Maxwell's equations of electromagnetism is that in general their solutions do not have classical lacunae and rather have quasi-lacunae. Unlike in the classical case, the field inside the quasi-lacunae is not zero; instead, there is an electrostatic solution driven by the electric charges that accumulate over time. In our previous work [23], we have shown that quasi-lacunae can also be used for building the far-field closures. However, for achieving a provably non-deteriorating performance over arbitrarily long time intervals, the accumulated charges need to be known ahead of time. The main contribution of the current paper is that we remove this limitation and modify the algorithm in such a way that one can rather avoid the accumulation of charge all together. Accordingly, the field inside the quasi-lacunae becomes equal to zero, which facilitates obtaining the temporally uniform error estimates as in the case of classical lacunae. The performance of the modified algorithm is corroborated by a series of numerical simulations. The range of problems that the new method can address includes important combined formulations, for which the interior subproblem may be non-Huygens', and only the exterior subproblem, i.e., the far

  14. Deterioration of Early Holocene coral reef due to sea level rise along west coast of India: Benthic foraminiferal testimony

    Digital Repository Service at National Institute of Oceanography (India)

    Mazumder, A.; Nigam, R.; Henriques, P.J.

    of the barnacle and increase in the abundance of Textularia. After summarizing the distribution of relict benthic foraminifera off central west coast of India and the ecological preferences of the modern day counterparts of the relict benthic foraminifera... (Pilsbury) has been reported within tidemarks on rock (Daniel, 1972). However, this species is totally absent in the modern environment of the west coast of India (Wagh, 1972). The relict presence of T. squamosa can be explained by the fact...

  15. Evaluation of Seismic Behaviors of Partially Deteriorated Reinforced Concrete Circular Columns Retrofitted with CFRP

    Directory of Open Access Journals (Sweden)

    Dongxu Hou

    2014-01-01

    Full Text Available Deficiency of the concrete strength in some regions of reinforced concrete (RC columns in practice may weaken the seismic behaviors of columns. Its effects on RC columns should be well understood. This paper aims to investigate the influences of deteriorated segment on the seismic behaviors of partially deteriorated RC columns and attempts to recover the seismic behaviors of partially deteriorated columns with Carbon Fiber Reinforced Polymer (CFRP composites. A finite element analysis was carried out to simulate the seismic behaviors of CFRP-confined partially deteriorated RC columns. The numerical results were verified by the laboratory tests of six specimens. Based on the finite element results, the failure location of partially deteriorated columns in an earthquake was predicted, and the effectiveness of CFRP retrofitted on partially deteriorated columns was evaluated.

  16. Heterotrophic microorganisms in deteriorated medieval wall paintings in southern Italian churches.

    Science.gov (United States)

    Pepe, O; Sannino, L; Palomba, S; Anastasio, M; Blaiotta, G; Villani, F; Moschetti, G

    2010-01-01

    The Campania region in southern Italy is noted for its large number of churches that harbour invaluable frescoes, dated from the beginnings of the 4th up to the 13th century. The wall paintings represent an integral part of the monuments, and their deterioration constitutes a potentially significant loss for the world's cultural heritage. Heterotrophic microorganisms such as bacteria and mould can grow on the surface of paintings that contain a wide range of organic and inorganic constituents, and provide different ecological niches that are exploited by a large variety of microbial species. We isolated and identified the heterotrophic microorganisms found in the biodegraded medieval wall paintings of seven historical churches in Campania. The paintings showed different levels of microbial contamination. Microbiological analysis of different paintings gave an overview of the different heterotrophic microorganisms. Bacteria and moulds were isolated from 77% of the sampling points analysed, in which the most common type of alteration was discolouration often associated with detachment of the paint layer. Bacterial strains were identified by 16S rRNA partial sequence analysis. The Bacillus genus was isolated in all churches, even though the type of species was variable, whereas all actinomycetes strains, isolated in five of the seven churches analysed, could be referred to the Streptomyces genus. The similarity of the sequences analysed of the 42 Bacillus spp., 2 Paenibacillus spp. and reference strains of different species showed that these bacteria differentiated in 14 groups. The most frequently occurring taxa were most closely related to Bacillus cereus/thurigiensis/anthracis and Bacillus pumilus groups. Thirteen Streptomyces spp. were differentiated in seven groups on the basis of neighbor-joining analysis of 16S rRNA. Fungi belonging to the genera Penicillium, Aspergillus, Fusarium and Alternaria were also isolated from deteriorated wall paintings.

  17. The effects of an enhanced simulation programme on medical students? confidence responding to clinical deterioration

    OpenAIRE

    Hogg, George; Miller, David

    2016-01-01

    Background Clinical deterioration in adult hospital patients is an identified issue in healthcare practice globally. Teaching medical students to recognise and respond to the deteriorating patient is crucial if we are to address the issue in an effective way. The aim of this study was to evaluate the effects of an enhanced simulation exercise known as RADAR (Recognising Acute Deterioration: Active Response), on medical students? confidence. Methods A questionnaire survey was conducted; the in...

  18. A Realistic Digital Deteriorating Patient to Foster Emergency Decision-Making Skills in Medical Students

    DEFF Research Database (Denmark)

    Blanchard, Emmanuel G.; Wiseman, Jeffrey; Naismith, Laura

    2012-01-01

    The Deteriorating Patient Activity (DPA) is a real-life educational simulation that prepares medical students to effectively approach emergency situations through a role play where their instructor plays the role of a patient whose state is rapidly deteriorating. Although proven engaging and effe......The Deteriorating Patient Activity (DPA) is a real-life educational simulation that prepares medical students to effectively approach emergency situations through a role play where their instructor plays the role of a patient whose state is rapidly deteriorating. Although proven engaging...

  19. Theoretical and numerical study of heat transfer deterioration in HPLWR

    International Nuclear Information System (INIS)

    Palko, D.; Anglart, H.

    2007-01-01

    A numerical investigation of the Heat Transfer Deterioration (HTD) phenomena is performed using the low-Re k - ω turbulence model. Steady state Reynolds-averaged Navier-Stokes equations are solved together with equations for the transport of enthalpy and turbulence. Equations are solved for the supercritical water flow at different pressures, using water properties from the standard IAPWS tables. All cases are extensively validated against experimental data. The influence of buoyancy on the HTD is demonstrated for different mass flow rates in the heated pipes. Numerical results prove that the RANS low-Re turbulence modeling approach is fully capable to simulate the heat transfer in pipes with the water flow at supercritical pressures. A study of buoyancy influence shows that for the low mass flow rates of coolant, the influence of buoyancy forces on the heat transfer in heated pipes is significant. For the high flow rates, buoyancy influence could be neglected and there are clearly other mechanisms causing the decrease in heat transfer at high coolant flow rates. (author)

  20. A damage mechanics based approach to structural deterioration and reliability

    International Nuclear Information System (INIS)

    Bhattcharya, B.; Ellingwood, B.

    1998-02-01

    Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed

  1. Flight into sanity. Jones's allegation of Ferenczi's mental deterioration reconsidered.

    Science.gov (United States)

    Bonomi, C

    1999-06-01

    In 'The Life and Work of Sigmund Freud', Volume III, Ernest Jones explained Ferenczi's final contributions as the product of a mental deterioration based on a progressive psychosis. Erich Fromm collected various testimonies by witnesses of Ferenczi's last years, all contrasting with Jones's assertions, and challenged Jones's manner of writing history. However, since Fromm was himself a dissident, and his witnesses were pupils, relatives or friends of Ferenczi's, they were discarded as 'partisans'. The present study aims at reconsidering the question of Ferenczi's insanity on the basis of many unpublished documents. The consulted documents do not support Jones's allegation of Ferenczi's insanity. At the same time, they show that Jones's allegation was not a one-man fabrication, but reflected a shared belief, eliciting many questions about the nature of this belief, the lack of scrutiny that characterised its spreading, and its possible function within the psychoanalytic community. It is suggested that Ferenczi's personality and teaching, especially his emphasis on the need to accept the patient's criticism, contrasted with the dominant conception of psychoanalysis, based on the analyst's infallibility.

  2. A damage mechanics based approach to structural deterioration and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Bhattcharya, B.; Ellingwood, B. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Civil Engineering

    1998-02-01

    Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed.

  3. Situation awareness in undergraduate nursing students managing simulated patient deterioration.

    Science.gov (United States)

    McKenna, Lisa; Missen, Karen; Cooper, Simon; Bogossian, Fiona; Bucknall, Tracey; Cant, Robyn

    2014-06-01

    Nursing work often occurs in complex and potentially hazardous settings. Awareness of patient and practice environments is an imperative for nurses in practice. To explore nursing students' situation awareness while engaging in simulated patient deterioration scenarios. The educational process of FIRST(2)ACT was the model for the nurse intervention. Situation awareness was measured quantitatively using the Situation Awareness Global Assessment tool. Four domains were measured: physiological perception (patient parameters), global perception (surroundings), comprehension (interpretation of information), and projection (forecasting outcomes). Clinical laboratories at each of three participating universities. Ninety-seven nursing students from three Australian universities. Between March and July 2012, students participated in three video-recorded simulation events, in which a trained actor played patient roles and groups of three students worked as teams. To measure situation awareness, following the simulation each team leader was taken to a separate room and asked to report on a question set regarding the patient's vital signs, bedside setting and medical diagnosis. Overall, situation awareness was low (41%). Of the four domains, physiological perceptions scored the lowest (26%) and projection the highest (59%). Final year nursing students may not have well developed situation awareness skills, especially when dealing with these types of scenarios. Education providers need to consider ways to assist students to fully develop this attribute. Findings suggest that this is an aspect of undergraduate nursing education that requires significant consideration by curriculum developers. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

  4. Health condition and residual life of deteriorating technical systems

    Energy Technology Data Exchange (ETDEWEB)

    Reinertsen, Rune

    1997-12-31

    Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of `technical health` to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

  5. Field analysis of the deterioration after some years of use of four insect-proof screens utilized in Mediterranean greenhouses

    Directory of Open Access Journals (Sweden)

    A. López-Martínez

    2013-09-01

    Full Text Available The installation of insect-proof screens on greenhouse vents is one of the principal methods of protection against harmful insects for crops. Their main disadvantage lies on their negative effects on natural ventilation and greenhouse microclimate, which have been the focus of studies by several authors. However, few works have analysed the effect of accumulated dust and dirt on these screens. The present study has analysed four anti-insect screens, comparing their geometric characteristics before installation and after three to four years of use. Two negative effects have been observed and quantified: deterioration of the threads that make up the screen and reduction of porosity due to accumulated dirt in the pores. This deterioration over time gives leads to a mean increase in thread diameter of 3.1%, as well to a mean decrease in the pore size of 6.2% and 2.3% in the weft (Lpx and the warp (Lpy, respectively. In fact, the insect-proof screen porosity (φ decreased due to the deterioration of the threads by an average of 6.5%, in addition to an average 20.3% reduction due to the accumulation of dirt in the pores, making a total reduction in porosity of 26.8%. This decrease in porosity leads to lower greenhouse ventilation rates, and is therefore detrimental for the greenhouse microclimate. Consequently, it is recommended that insect-proof screens in arid areas such as Almería (Spain, with abundant dust suspended in the atmosphere, be washed monthly using water sprayed at high pressure.

  6. Clinical deterioration after sildenafil cessation in patients with pulmonary hypertension

    Directory of Open Access Journals (Sweden)

    Anne M Keogh

    2008-10-01

    Full Text Available Anne M Keogh, Andrew Jabbour, Christopher S Hayward, Peter S MacdonaldHeart Lung Transplant Unit, St Vincent’s Hospital, Sydney, New South Wales, AustraliaAbstract: Sildenafil is a selective inhibitor of phosphodiesterase type 5 (PDE-5. Its chronic administration has been shown to improve exercise capacity, World Health Organization functional class, and haemodynamics in patients with symptomatic pulmonary arterial hypertension (PAH. There is however, no data describing the clinical consequences of sudden cessation of sildenafil treatment. In this series, 9 patients with NYHA Class II–IV PAH who were stable on 2 months of sildenafil monotherapy, had their sildenafil ceased to accommodate a 2-week washout period, required for enrollment in research involving an endothelin receptor antagonist. Six minute walk distance (SMWD and clinical assessments were performed before cessation of sildenafil, and again 2 weeks later. Over the course of this 2-week washout period, 6 of the 9 patients reported increased breathlessness and fatigue, 1 of these was hospitalized with worsening right heart failure. The SMWD fell in 6 patients, with falls of greater than 100 m recorded in 4 patients. This was accompanied by a worsening of NYHA Class from 2.5 ± 0.2 to 3.1 ± 0.1 (mean ± SEM, p = 0.01. These data indicate that sudden cessation of sildenafil monotherapy, in patients with PAH, carries with it a significant and unpredictable risk of rapid clinical deterioration. We recommend that if sildenafil needs to be ceased, it would be more prudent to consider concurrent vasodilator therapy before the gradual cessation of sildenafil.Keywords: sildenafil, pulmonary hypertension, phosphodiesterase inhibitor

  7. Control method for light deterioration of amorphous solar cell. 2. Temperature effect method; Amorphous taiyo denchi no hikari rekka yokuseiho. 2. Ondo kokaho

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, H.; Itsumi, J.; Sano, N. [Kumamoto Institute of Technology, Kumamoto (Japan)

    1997-11-25

    Experimental studies have been carried out on suppressing early deterioration in amorphous silicon solar cells. The amorphous silicon solar cell is characterized by deterioration due to light irradiation and restoration due to temperature rise. An exposure experiment was performed under three conditions: installation in natural environment, installation with rear side of the solar cells covered with an insulating material, and installation with rear side of the solar cells covered with warming elements and an insulating material. Tests were made on suppressing progress of the early deterioration caused by temperature conditions. As a result, the efficiency in the natural condition was found to decrease as largely as 32% in an open circuit condition and 58% in a short circuit condition. The efficiency reduction rate was smaller in the open circuit condition when the insulation material was installed, but in the short circuit condition, resistance characteristics caused by rain water and electrolytic corrosion were exhibited. For the case with warming elements installed, the reduction in the efficiency was more remarkable, contrary to the expectation. The cause was determined that water existing between the rear side and the warming elements was warmed up, accelerating the electrolytic action, and resulting in deterioration advanced over a wide area in the rear side. 6 refs., 6 figs., 3 tabs.

  8. Influence of nuclear glasses composition on their liability to deterioration; Influence de la composition des verres nucleaires sur leur alterabilite

    Energy Technology Data Exchange (ETDEWEB)

    Tovena, I.

    1995-09-29

    This contributes to the study of the nuclear glasses composition influence on their liability to deterioration. The methodology of the experimental research used has lead to define between the thirty oxides which form the reference glass light water, six oxides of interest. For each of these oxides, a composition variation area has been defined. A matrix of twenty glass compositions has then been defined. The preparation of materials of these compositions has sometimes lead to materials weakly heterogeneous which have been characterized before deterioration. This study has been completed by those of three glasses in a composition variation area narrower of the light water nuclear glass : the R7T7 and two glasses at limits having respectively an initial dissolution velocity at 100 degrees Celsius theoretically maximum and minimum. Some deterioration parameters in pure water have been experimentally measured on the twenty three glasses : 1) an initial dissolution velocity at 100 degrees (Vo{sub 1}00) Celsius and another one at 90 degrees Celsius (Vo{sub 9}0) 2) a dissolution velocity in conditions near the saturation at 90 degrees Celsius 3) an apparent solubility of glass based on the ortho silicic acid activity 4) the evolution of the dissolution kinetics at 90 degrees Celsius in sub-saturated medium towards saturated medium 5) the alteration films nature developed at the glasses surface during these last alteration tests. Some thermodynamic and structural models have been studied in order to predict Vo{sub 9}0 and Vo{sub 1}00. The dissolution kinetic law developed from reference glass dissolution results has been studied with the calculation code LIXIVER. It has not been able to be used for most of the glasses compositions studied. As a consequence, the glasses dissolution control by a surface reaction which are itself controlled by the only dissolved silica is an hypothesis which is not verified for the greater part of the glasses. (O.L.). refs., figs., tabs.

  9. Air Quality Deterioration of Urban Areas Caused by Wildfires in a Natural Reservoir Forest of Mexico

    Directory of Open Access Journals (Sweden)

    Noel Carbajal

    2015-01-01

    Full Text Available Many regions of the world suffer loss of vegetation and reduced air quality due to wildfires. Studies on aerosol emissions by wildfires often discuss the negative effects of atmospheric contaminants from a regional or mesoscale perspective. The occurrence of wildfires reveals that a high percentage takes place close to large urban areas. Very high concentration of pollutants and PM10 particulate matter reach urban zones and millions of inhabitants. These events of high pollutant concentrations are seasonally recurrent. There are many large urban areas in the world that often undergo severe air deterioration due to wildfires smoke. We document the extreme impact of wildfire that occurs in the Protected Area of Flora and Fauna La Primavera located in neighborhood of Guadalajara, a large urban zone in Mexico. The simultaneous emissions of aerosols by 60 wildfires were simulated and compared with observed data. The plume generated by the wildfires reached large areas of the central part of Mexico. The principal characteristics of smog emissions (CO, NO2, and PM10 over the urban area were acceptably reproduced. Observed and modeled CO, PM10, and NO2 data indicated that aerosol plumes generated by the wildfires increased notably the concentrations over the metropolitan zone of Guadalajara.

  10. Deterioration and Microstructural Evolution of the Fly Ash Geopolymer Concrete against MgSO4 Solution

    Directory of Open Access Journals (Sweden)

    Tao Long

    2017-01-01

    Full Text Available Fly ash geopolymer concrete (FAGC and ordinary Portland cement concrete (OPCC specimens were immersed in 5% MgSO4 solution undergoing 32 wetting-drying and heating-cooling cycles. Their compressive behavior was investigated after every 8 cycles. Several microstructure analysis techniques were applied on the samples to identify the materials formed due to magnesium sulfate attack, including XRD, FTIR, SEM, and EDS. Experimental results elucidated that the compressive strength loss ratio in the heating group of FAGC was 12.7%, while that of OPCC was 17.8%, which means that FAGC had better magnesium sulfate resistance than OPCC. The compressive strength loss of OPCC was due to the formation of gypsum under the magnesium sulfate attack exposed to wetting-drying and heating-cooling cycles. The deterioration mechanisms of FAGC against MgSO4 solution were discovered to be that sodium aluminum silicate hydrate (N-A-S-H gels reacted with MgSO4, leading to the creation of low strength magnesium aluminum silicate hydrate (M-A-S-H gels.

  11. Deterioration of wood from live and dead Alaska yellow-cedar in contact with soil

    Science.gov (United States)

    Paul Hennon; Bessie Woodward; Patricia Lebow

    2007-01-01

    The deterioration of heartwood from live and dead Alaska yellow-cedar trees was evaluated by exposing ministakes in soils at field sites in Alaska and Mississippi for 2 and 4 year intervals. Southern yellow pine sapwood served as a control. The vastly greater deterioration, as measured by weight loss, in Mississippi compared to Alaska (60 and 10 percent after 4 years,...

  12. a cash flow eoq inventory model for non- deteriorating items with ...

    African Journals Online (AJOL)

    credit- linked demand under permissible delay in payments. Optimal retailer's ordering policies in the EOQ model for deteriorating items under trade credit financing in supply chain was developed by Mahata and Mahata (2009). Musa and Sani. (2009) developed an EOQ model for items that exhibit delay in deterioration.

  13. On Rotor-Blade Deterioration and Pressure Losses in a Gas-Turbine ...

    African Journals Online (AJOL)

    blade deterioration and pressure losses in a gas-turbine plant. This was achieved ... Rotor-blade deterioration result in 1.2 percent drop in pressure ratio across the compressor, with a corresponding drop in isentropic efficiency from 0.83 to 0.72.

  14. Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure

    NARCIS (Netherlands)

    Demcenko, A.; Visser, Roy; Akkerman, Remko

    2016-01-01

    Ultrasonic wave propagation in deteriorated concrete structures was studied numerically and experimentally. Ultrasonic single-side access immersion pulse-echo and diffuse field measurements were performed in deteriorated concrete structures at 0.5 MHz center frequency. Numerically and experimentally

  15. 76 FR 31241 - Prevention of Significant Deterioration (PSD) Program; Massachusetts; Announcing Delegation...

    Science.gov (United States)

    2011-05-31

    ... Deterioration (PSD) Program; Massachusetts; Announcing Delegation Agreement Between EPA and Massachusetts... authority to implement and enforce the Federal Prevention of Significant Deterioration (PSD) program to the... at the Office of Ecosystem Protection, U.S. Environmental Protection Agency, EPA New England Regional...

  16. 40 CFR 90.118 - Certification procedure-service accumulation and usage of deterioration factors.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certification procedure-service accumulation and usage of deterioration factors. 90.118 Section 90.118 Protection of Environment ENVIRONMENTAL... procedure—service accumulation and usage of deterioration factors. (a)(1) The test engine must be operated...

  17. AN OPTIMAL REPLENISHMENT POLICY FOR DETERIORATING ITEMS WITH RAMP TYPE DEMAND UNDER PERMISSIBLE DELAY IN PAYMENTS

    Directory of Open Access Journals (Sweden)

    Dr. Sanjay Jain

    2010-10-01

    Full Text Available The aim of this paper is to develop an optimal replenishment policy for inventory models of deteriorating items with ramp type demand under permissible delay in payments. Deterioration of items begins on their arrival in stock.  An example is also presented to illustrate the application of developed model.

  18. Cranial CT, Lumbar Puncture, and Clinical Deterioration in Bacterial Meningitis: A Nationwide Cohort Study.

    Science.gov (United States)

    Costerus, Joost M; Brouwer, Matthijs C; Sprengers, Marieke E S; Roosendaal, Stefan D; van der Ende, Arie; van de Beek, Diederik

    2018-03-07

    It is unclear how often lumbar puncture (LP) is complicated by cerebral herniation in patients with bacterial meningitis and whether cranial CT can be used to identify patients at risk for herniation. We performed a nationwide prospective cohort study of patients with community-acquired bacterial meningitis from 2006 to 2014 and identified patients with clinical deterioration possibly caused by LP. For systematic evaluation of contraindications for LP on cranial CT, these patients were matched to patients in the cohort without deterioration. Four experts, blinded for outcome, scored cranial CT results for contraindications for LP. A Fleiss' generalized Kappa for this assessment was determined. Of 1533 episodes, 47 (3.1%) had deterioration possibly caused by LP. Two patients deteriorated within 1 hour after LP (0.1%). In 43 of 47 patients with deterioration cranial CT was performed prior to LP, so CT results were matched with 43 patients without deterioration. The interrater reliability of assessment of contraindications for LP on cranial CT was moderate (Fleiss' generalized Kappa 0.47). A contraindication for LP was reported by all 4 raters in 6 patients with deterioration (14%) and in 5 without deterioration (11%). LP can be performed safely in the large majority of patients with bacterial meningitis, as it is only very rarely complicated by cerebral herniation. Cranial CT can be considered a screening method for contraindications for LP, but the interrater reliability of this assessment is moderate.

  19. Do Work Characteristics Predict Health Deterioration Among Employees with Chronic Diseases?

    NARCIS (Netherlands)

    Wind, A. de; Boot, C.R.L.; Sewdas, R.; Scharn, M.; Heuvel, S.G. van den; Beek, A.J. van der

    2017-01-01

    Purpose In our ageing workforce, the increasing numbers of employees with chronic diseases are encouraged to prolong their working lives. It is important to prevent health deterioration in this vulnerable group. This study aims to investigate whether work characteristics predict health deterioration

  20. The effectiveness of virtual simulation in improving student nurses' knowledge and performance during patient deterioration: A pre and post test design.

    Science.gov (United States)

    Borg Sapiano, Alexis; Sammut, Roberta; Trapani, Josef

    2018-03-01

    Preparing nursing students to perform competently in complex emergency situations, such as during rapid patient deterioration, is challenging. Students' active engagement in such scenarios cannot be ensured, due to the unexpected nature of such infrequent events. Many students may consequently not experience and integrate the management of patient deterioration into their knowledge and practical competency by the end of their studies, making them unprepared to manage such situations as practicing nurses. This study investigated the effectiveness of virtual simulation in improving performance during rapid patient deterioration. To investigate the effectiveness of virtual simulation in improving student nurses' knowledge and performance during rapid patient deterioration. A pre- and post-test design was used. Nursing students at a university in Malta were invited to participate in a virtual simulation program named FIRST 2 ACTWeb™, using their own computer devices. A total of 166 (response rate=50%) second and third year diploma and degree nursing students participated in the study. The simulation included three scenarios (Cardiac-Shock-Respiratory) portraying deteriorating patients. Performance feedback was provided at the end of each scenario. Students completed pre- and post-scenario knowledge tests and performance during each scenario was recorded automatically on a database. Findings showed a significant improvement in the students' post-scenario knowledge (z=-6.506, psimulation as an effective learning tool for pre-registration nursing students in different programs. Simulation improves both knowledge about and performance during patient deterioration. Virtual simulation of rare events should be a key component of undergraduate nurse education, to prepare students to manage complex situations as practicing nurses. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. A comprehensive review of milk fouling on heated surfaces.

    Science.gov (United States)

    Sadeghinezhad, E; Kazi, S N; Dahari, M; Safaei, Mohammad Reza; Sadri, Rad; Badarudin, A

    2015-01-01

    Heat exchanger performance degrades rapidly during operation due to formation of deposits on heat transfer surfaces which ultimately reduces service life of the equipment. Due to scaling, product deteriorates which causes lack of proper heating. Chemistry of milk scaling is qualitatively understood and the mathematical models for fouling at low temperatures have been produced but the behavior of systems at ultra high temperature processing has to be studied further to understand in depth. In diversified field, the effect of whey protein fouling along with pressure drop in heat exchangers were conducted by many researchers. Adding additives, treatment of heat exchanger surfaces and changing of heat exchanger configurations are notable areas of investigation in milk fouling. The present review highlighted information about previous work on fouling, influencing parameters of fouling and its mitigation approach and ends up with recommendations for retardation of milk fouling and necessary measures to perform the task.

  2. Family presence during management of acute deterioration: Clinician attitudes, beliefs and perceptions of current practices.

    Science.gov (United States)

    Youngson, Megan J; Currey, Judy; Considine, Julie

    2016-08-01

    The nature of acute clinical deterioration has changed over the last three decades with a decrease in in-hospital cardiac arrests and an increase in acute clinical deterioration. Despite this change, research related to family presence continues to focus on care during resuscitation rather than during acute deterioration. To explore healthcare clinician attitudes, beliefs and perceptions of current practices surrounding family presence during episodes of acute deterioration in adult Emergency Department patients. Clinicians (n=156) from a single study site in Melbourne, Australia completed a 17-item survey. Participants disagreed that family members would interrupt (59.0%) or interfere (61.5%) with patient care if present during episodes of patient deterioration. Most (77.6%) participants stated that they included family during episodes of patient deterioration. Females, nurses and Australians/New Zealanders had a more positive attitude towards including family during episodes of patient deterioration when compared to males, doctors and clinicians of other ethnicities. Nurses with post-graduate qualifications and those with more years of experience had a more positive attitude towards including family during episodes of patient deterioration than nurses without post-graduation qualification and with less years of experience. Clinicians had predominantly positive attitudes towards including family during episodes of patient deterioration and perceived it to be a common day-to-day practice. Gender, profession, country of birth, education level and years of experience all impacted on clinician attitudes, beliefs and perceptions of family presence during acute deterioration. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  3. Comparative study of deterioration forms on nearby granitic bridges from an urban setting in the NW Iberian Peninsula

    Science.gov (United States)

    Pozo-Antonio, J. S.; Pereira, M. F. C.; Rocha, C. S. A.; Puente, I.; Figueiredo, C.

    2016-12-01

    Stone coatings, biological colonization, efflorescence and detachments are frequent on granitic surfaces of our cultural heritage infrastructure. In order to find the different origins for each deterioration form, this paper studies and compares several coatings, efflorescence and flakes found on granitic surfaces of bridges from different ages built in the same area (Ourense in NW Iberian Peninsula at 90 km from the sea) under the same environmental and traffic conditions. The most recent bridge was the New Bridge built in the beginning of 20th century and the oldest one was the Roman Bridge with the 1st century AD foundations but its current structure was built in 17th century. The New Bridge has exhibited a greater variety of deterioration forms such as black crusts, carbonate crusts, efflorescence and biological colonization. On the Roman Bridge, black crusts, efflorescence to a greater extent, and flakes associated with salt crystallization processes have been identified. Scanning electron microscopy with energy dispersive X-ray spectroscopy, X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy studies were carried out in order to establish their composition, and optical and electronic microscopies and X-ray microtomography were used to study their morphologies. As a result, anthropogenic factors (industrial activities, traffic pollution and fertilizers) are considered to be the main contributors to crusts, efflorescence and flake formation on both studied substrates (granite ashlars and mortars). To a lesser extent, natural factors (marine influence and bird droppings) should be taken into account.

  4. Deterioration of eelgrass, Zostera marina L., meadows by water pollution in Seto Inland Sea, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Tamaki, Hitoshi; Tokuoka, Makoto; Nishijima, Wataru; Terawaki, Toshinobu; Okada, Mitsumasa

    2002-11-01

    Survival of transplanted Zostera marina L. (eelgrass) and environmental conditions (water quality, bottom sediments, sedimentation on leaves and flow regime) were studied concurrently in the center, edge, and at the outside of a eelgrass meadow located in a eutrophic coastal zone in northern Hiroshima Bay, Seto Inland Sea, Japan. Eelgrass transplants at the outside of the meadow declined significantly, whereas those at the center were consistently well established. Silt content in the bottom sediments at the outside was higher than that at the center. The sediment was oxic from the surface to 2 cm deep at the center, whereas those at the edge and the outside were reductive almost from the surface. The sediment characteristics typical in eutrophic water seemed to be a factor responsible for the deterioration of eelgrass meadows. Although suspended solid concentrations in the water columns were almost the same, the amount of sediments deposited on leaves of eelgrass at the outside was higher than that at the center of the meadow. The amount of the deposition at the outside seems to be enough to inhibit photosynthesis; i.e. photosynthetic photon flux density (PPFD) available for eelgrass was only 36% of that without any deposition. The deposition in the center, however, was small enough to allow 84% of the original PPFD. Flow rates, determined at 30 cm above the bottom, a half height of average eelgrass, suggested that the rate at the outside was not enough to remove deposited sediments from the surface of eelgrass leaves. Thus, the large amount of sediment deposition caused by water pollution and/or eutrophication seemed to be another factor to inhibit the survival of eelgrass at the outside edge of the meadow.

  5. Deterioration of eelgrass, Zostera marina L., meadows by water pollution in Seto Inland Sea, Japan

    International Nuclear Information System (INIS)

    Tamaki, Hitoshi; Tokuoka, Makoto; Nishijima, Wataru; Terawaki, Toshinobu; Okada, Mitsumasa

    2002-01-01

    Survival of transplanted Zostera marina L. (eelgrass) and environmental conditions (water quality, bottom sediments, sedimentation on leaves and flow regime) were studied concurrently in the center, edge, and at the outside of a eelgrass meadow located in a eutrophic coastal zone in northern Hiroshima Bay, Seto Inland Sea, Japan. Eelgrass transplants at the outside of the meadow declined significantly, whereas those at the center were consistently well established. Silt content in the bottom sediments at the outside was higher than that at the center. The sediment was oxic from the surface to 2 cm deep at the center, whereas those at the edge and the outside were reductive almost from the surface. The sediment characteristics typical in eutrophic water seemed to be a factor responsible for the deterioration of eelgrass meadows. Although suspended solid concentrations in the water columns were almost the same, the amount of sediments deposited on leaves of eelgrass at the outside was higher than that at the center of the meadow. The amount of the deposition at the outside seems to be enough to inhibit photosynthesis; i.e. photosynthetic photon flux density (PPFD) available for eelgrass was only 36% of that without any deposition. The deposition in the center, however, was small enough to allow 84% of the original PPFD. Flow rates, determined at 30 cm above the bottom, a half height of average eelgrass, suggested that the rate at the outside was not enough to remove deposited sediments from the surface of eelgrass leaves. Thus, the large amount of sediment deposition caused by water pollution and/or eutrophication seemed to be another factor to inhibit the survival of eelgrass at the outside edge of the meadow

  6. Deterioration of ancient metallic elements taken from Toledo cathedral

    Directory of Open Access Journals (Sweden)

    Castaño González, Juan Guillermo

    2001-08-01

    Full Text Available The construction of Toledo Cathedral spanned a period of more than 200 years and was influenced by many different trends and criteria, reflected in the wide range of styles it accommodates (basically Mudéjar and Gothic, with Flemish, baroque and renaissance elements. Over the centuries it has undergone numerous restorations, also according to different criteria. The cathedral is situated in an environment of low aggressivity, in terms of atmospheric contamination, but the passage of time has taken its toll on many structural, architectural and artistic elements. During recent restoration work several metallic elements, which have been exposed for many years or even centuries to the inclemencies of the Toledo climate, were taken in order to analyse their composition and deterioration. The techniques used have been Scanning Electron Microscopy with X-Ray Microprobe (SEM/EDAX, X-Ray Photoelectron Spectroscopy (XPS and X-Ray Diffraction (XRD. The elements considered are a piece of roofing lead, a lead slate clamp, a piece of stained glass window leading, and an iron nail.

    La Catedral de Toledo se edificó en un período de más de 200 años, bajo numerosos criterios de construcción que se reflejan en la multiplicidad de estilos que alberga (entre mudéjar y gótico, con aportaciones flamencas, barrocas y renacentistas. A través de los siglos, ha sido objeto de numerosas restauraciones, también bajo distintos criterios. La catedral está ubicada en un ambiente poco agresivo, en cuanto a corrosión atmosférica se refiere. Sin embargo, el discurrir de tantos años no deja de hacer mella en los diversos elementos estructurales, arquitectónicos y artísticos que la componen. En recientes restauraciones se obtuvieron algunos elementos metálicos que han estado expuestos, por muchos años, siglos inclusive, a las inclemencias del clima toledano, con el propósito de analizar su composición y deterioro, empleando las técnicas de Microscopio

  7. Laser composite surfacing of stainless steel with SiC

    Science.gov (United States)

    Dutta Majumdar, J.; Chandra, B. Ramesh; Nath, A. K.; Manna, I.

    2006-07-01

    In the present study, an attempt has been made to improve wear resistance of AISI 304 stainless steel by laser composite surfacing with SiC. Laser processing has been carried out by pre-deposition of Fe + SiC powders (in the ratio of 85:15 and thickness of 100 m) on AISI 304 stainless steel substrate and subsequently, melting it using a 2 kW continuous wave CO2 laser. Following laser processing, a detailed characterization and evaluation of mechanical/electrochemical properties of the composite layer were undertaken to study the influence of laser processing on the characteristics and properties of the composite layer. Microstructure of the composite layer consisted of uniformly dispersed SiC particles in grain refined -Fe dendrites. Laser composite surfacing led to a significant improvement in microhardness and wear resistance as compared to as-received substrate. However, pitting corrosion property was marginally deteriorated due to laser composite surfacing.

  8. Surface Water Interactions using Environmental Isotopes

    Indian Academy of Sciences (India)

    40

    lead to the deterioration of water quality of both surface and groundwater. One of the important features of karst terrains is the interaction between surface water and groundwater, which has been the subject of interest for many researchers because of the potential of contamination of the aquifer from surface water recharge.

  9. Electricity generating capacity and performance deterioration of a microbial fuel cell fed with beer brewery wastewater.

    Science.gov (United States)

    Köroğlu, Emre Oğuz; Özkaya, Bestamin; Denktaş, Cenk; Çakmakci, Mehmet

    2014-12-01

    This study focused on using beer brewery wastewater (BBW) to evaluate membrane concentrate disposal and production of electricity in microbial fuel cells. In the membrane treatment of BBW, the membrane permeate concentration was 570 ± 30 mg/L corresponding to a chemical oxygen demand (COD) removal efficiency of 75 ± 5%, and the flux values changed between 160 and 40 L/m(2)-h for all membrane runs. For electricity production from membrane concentrate, the highest current density in the microbial fuel cell (MFC) was observed to be 1950 mA/m(2) according to electrode surface area with 36% COD removal efficiency and 2.48% CE with 60% BBW membrane concentrate. The morphologies of the cation exchange membrane and the MFC deterioration were studied using a scanning electron microscope (SEM), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). A decrease in the thermal stability of the sulfonate (-SO3H) groups was demonstrated and morphological changes were detected in the SEM analysis. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  10. Changes of the phytoplankton community as symptoms of deterioration of water quality in a shallow lake.

    Science.gov (United States)

    Dembowska, Ewa Anna; Mieszczankin, Tomasz; Napiórkowski, Paweł

    2018-01-25

    Covering more than 60% of the lake surface, macrophytes determined the taxonomic composition of phytoplankton. We have found numerous indications of ecological deterioration and an increased trophic level year to year: an increased total number of taxa; a significantly increased number of species of Chlorophyta, Bacillariophyceae and Cyanoprokaryota; a decreased number of Chrysophyceae; increased Nygaard index, and high diversity and variability of phytoplankton functional groups. Within 2 years (2002 and 2003) algal biomass doubled: from 3.616 to 7.968 mg l -1 . An increased contribution of Chlorococcales and Cyanoprokaryota indicates progressive eutrophication of the lake. The average size of planktonic algae increased, particularly Cyanoprokaryota, where small-celled decreased dramatically and were replaced by large colonies. Cyanoprokaryota remained the dominant group of phytoplankton after 10 years, and the ecosystem of the lake remained in the turbid state. This group of algae had the average biomass 9.734 mg l -1 , which constituted almost 92% of the total biomass.

  11. Role of alkalis of aggregate origin in the deterioration of CAC concrete

    International Nuclear Information System (INIS)

    Blanco-Varela, M.T.; Martinez-Ramirez, S.; Vazquez, T.; Sanchez-Moral, S.

    2005-01-01

    Both hexagonal and cubic calcium aluminate cement (CAC) hydrates react with atmospheric CO 2 , bringing about mineralogical changes in concrete, which may, on occasion, lead to loss of mechanical strength. Alkaline hydrolysis or carbonation in the presence of alkalis is a highly destructive process. The purpose of the study was to determine what caused CAC concrete deterioration in a prestressed beam that had suffered intense external damage and showed signs of alkaline hydrolysis or a reaction between the aggregate and the cement. Samples of the internal (sound) and external (damaged) parts of the concrete were studied using XRF, XRD, FTIR, OM, SEM/EDX, and BSE techniques, and mechanical strength was measured on microspecimens extracted from both zones. The conclusion drawn from these analyses was that alkaline hydrolysis took place on or near the surface of the concrete. The white deposits observed around the alkali-containing aggregate were found to consist primarily of bayerite whose very loose consistency undermined the aggregate-matrix bond, greatly weakening the material

  12. Understanding the Effects of Climate on Airfield Pavement Deterioration Rates

    Science.gov (United States)

    2013-03-01

    eliminating frost susceptible materials frost heave effects can be minimized. Using properly designed asphalt binders that perform well in cold...processes that operate on or near the surface of our planet ” (de Smith, Goodchild, & Longley, 2007). Spatial interpolation is a spatial analysis

  13. Current practices related to family presence during acute deterioration in adult emergency department patients.

    Science.gov (United States)

    Youngson, Megan J; Currey, Judy; Considine, Julie

    2017-11-01

    To explore the characteristics of and interactions between clinicians, patients and family members during management of the deteriorating adult patient in the emergency department. Previous research into family presence during resuscitation has identified many positive outcomes when families are included. However, over the last three decades the epidemiology of acute clinical deterioration has changed, with a decrease in in-hospital cardiac arrests and an increase in acute clinical deterioration. Despite the decrease in cardiac arrests, research related to family presence continues to focus on care during resuscitation rather than care during acute deterioration. Descriptive exploratory study using nonparticipatory observation. Five clinical deterioration episodes were observed within a 50-bed, urban, Australian emergency department. Field notes were taken using a semistructured tool to allow for thematic analysis. Presence, roles and engagement describe the interactions between clinicians, family members and patients while family are present during a patient's episode of deterioration. Presence was classified as no presence, physical presence and therapeutic presence. Clinicians and family members moved through primary, secondary and tertiary roles during patients' deterioration episode. Engagement was observed to be superficial or deep. There was a complex interplay between presence, roles and engagement with each influencing which form the other could take. Current practices of managing family during episodes of acute deterioration are complex and multifaceted. There is fluid interplay between presence, roles and engagement during a patient's episode of deterioration. This study will contribute to best practice, provide a strong foundation for clinician education and present opportunities for future research. © 2017 John Wiley & Sons Ltd.

  14. Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites.

    Science.gov (United States)

    Crawford, Bryn; Pakpour, Sepideh; Kazemian, Negin; Klironomos, John; Stoeffler, Karen; Rho, Denis; Denault, Johanne; Milani, Abbas S

    2017-10-31

    The development and application of bio-sourced composites have been gaining wide attention, yet their deterioration due to the growth of ubiquitous microorganisms during storage/manufacturing/in-service phases is still not fully understood for optimum material selection and design purposes. In this study, samples of non-woven flax fibers, hemp fibers, and mats made of co-mingled randomly-oriented flax or hemp fiber (50%) and polypropylene fiber (50%) were subjected to 28 days of exposure to (i) no water-no fungi, (ii) water only and (iii) water along with the Chaetomium globosum fungus. Biocomposite samples were measured for weight loss over time, to observe the rate of fungal growth and the respiration of cellulose components in the fibers. Tensile testing was conducted to measure mechanical properties of the composite samples under different configurations. Scanning electron microscopy was employed to visualize fungal hyphal growth on the natural fibers, as well as to observe the fracture planes and failure modes of the biocomposite samples. Results showed that fungal growth significantly affects the dry mass as well as the tensile elastic modulus of the tested natural fiber mats and composites, and the effect depends on both the type and the length scale of fibers, as well as the exposure condition and time.

  15. Recent developments in piezoelectric ceramic materials and deterioration of their properties

    International Nuclear Information System (INIS)

    Pasha, R.A.; Khan, M.Z.

    2006-01-01

    There has been growing interest in recent years in piezoelectric ceramic materials because of their excellent dielectric, sensing, actuating and efficient process control applications. Lead Zirconate Titanate (PZT), Barium Titanate (BaTi O/sub 3/) and Lead Metaniobate (PbNb/sub 2/ O/sub 6/) and PVDF Polymers and generally favored as smart sensing materials. These materials are being used in critical engineering systems and smart structure. Fatigue failure due to electrical and thermal shocking is a major issue in degradation of these materials. Lot of work has been done in this area but still various issues need to investigate. Recent developments and current issues in piezoelectric materials and deterioration of their properties in different working conditions are discussed. The development of Finite Element codes incorporating smart material element has provided an opportunity to solve some practical problems. The new piezoelectric finite element capability available in some commercial package like ANSYS makes it convenient to perform static dynamic and thermal analysis for the fully coupled piezoelectric and structural response. Researchers have a great scope to uncover the various properties of these smart materials in different environmental conditions. In present work an overall review of the title is presented. (author)

  16. Investigation of fungal deterioration of synthetic paint binders using vibrational spectroscopic techniques.

    Science.gov (United States)

    Cappitelli, Francesca; Vicini, Silvia; Piaggio, Paolo; Abbruscato, Pamela; Princi, Elisabetta; Casadevall, Arturo; Nosanchuk, Joshua D; Zanardini, Elisabetta

    2005-01-14

    The deterioration of synthetic polymers caused by biological process is usually evaluated by visual inspection and measuring physical effects. In contrast to this approach, we have applied vibrational spectroscopies to study the biodegradation of the synthetic resins. 29 synthetic resins used as paint binding media, including acrylic, alkyd and poly(vinyl acetate) polymers, were examined for potential susceptibility to fungal degradation using the standard method ASTM G21-96(2002). In addition, the degraded resins were analysed by Raman spectroscopy, FT-IR and FT-IR photoacoustic spectroscopy. Almost all the acrylic resins studied proved to be resistant to microbial attack, while all alkyd resins and some poly(vinyl acetates) turned out to be biodegradable. Within a few days of inoculation Aspergillus niger was the most copious fungus on the biodegraded resins. A comparison of the IR and Raman spectra of control and biodegraded resins did not show any differences, but photoacoustic spectroscopy revealed additional bands for the fungal-degraded resins, consistent with the presence of fungal-derived substances. The additional bands in the photoacoustic spectra were due to the presence of Aspergillus niger and melanin, a fungal pigment. Since IR photoacoustic spectroscopy can be also a suitable technique for the chemical characterisation of binding media, the same spectroscopic analysis can be employed to both characterise the material and obtain evidence for fungal colonization. Microbial growth on Sobral 1241ML (alkyd resin) after 28 d (growth rating 4) compared with the non-inoculated resin.

  17. Cognitive deterioration and changes of P300 during total sleep deprivation.

    Science.gov (United States)

    Lee, Heon-Jeong; Kim, Leen; Suh, Kwang-Yoon

    2003-10-01

    The study was conducted to evaluate the cognitive deteriorations induced by sleep deprivation with the computerized neurocognitive tests and the P300 event-related potential. Thirty healthy college students (22 men, eight women) participated in the present study. Subjects remained awake for 38 h under continuous surveillance. In the morning and the evening of the two study days, the computerized neurocognitive tests and the P300 were performed. In vigilance test and reaction unit test, there were significant cognitive impairments during sleep deprivation. However, in the cognitrone test there was significant functional improvement, which might be due to the practice effect. The P300 latency was significantly prolonged and the amplitudes decreased during sleep deprivation. The cognitive impairment during 38 h of sleep deprivation was mainly in terms of vigilance and reaction time. In contrast, higher complex cognitive function such as fine perceptual analyses, visual discrimination and working memory might be not affected by 38 h of total sleep deprivation. The changes of P300 were significantly correlated with the results of vigilance and reaction unit tests but not with the cognitrone test. Taken together, these results suggest that the P300 changes that occur during sleep deprivation are a reflection of the decrement in vigilance, which prolongs reaction time.

  18. Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites

    Directory of Open Access Journals (Sweden)

    Bryn Crawford

    2017-10-01

    Full Text Available The development and application of bio-sourced composites have been gaining wide attention, yet their deterioration due to the growth of ubiquitous microorganisms during storage/manufacturing/in-service phases is still not fully understood for optimum material selection and design purposes. In this study, samples of non-woven flax fibers, hemp fibers, and mats made of co-mingled randomly-oriented flax or hemp fiber (50% and polypropylene fiber (50% were subjected to 28 days of exposure to (i no water-no fungi, (ii water only and (iii water along with the Chaetomium globosum fungus. Biocomposite samples were measured for weight loss over time, to observe the rate of fungal growth and the respiration of cellulose components in the fibers. Tensile testing was conducted to measure mechanical properties of the composite samples under different configurations. Scanning electron microscopy was employed to visualize fungal hyphal growth on the natural fibers, as well as to observe the fracture planes and failure modes of the biocomposite samples. Results showed that fungal growth significantly affects the dry mass as well as the tensile elastic modulus of the tested natural fiber mats and composites, and the effect depends on both the type and the length scale of fibers, as well as the exposure condition and time.

  19. Idh2 Deficiency Exacerbates Acrolein-Induced Lung Injury through Mitochondrial Redox Environment Deterioration

    Directory of Open Access Journals (Sweden)

    Jung Hyun Park

    2017-01-01

    Full Text Available Acrolein is known to be involved in acute lung injury and other pulmonary diseases. A number of studies have suggested that acrolein-induced toxic effects are associated with depletion of antioxidants, such as reduced glutathione and protein thiols, and production of reactive oxygen species. Mitochondrial NADP+-dependent isocitrate dehydrogenase (idh2 regulates mitochondrial redox balance and reduces oxidative stress-induced cell injury via generation of NADPH. Therefore, we evaluated the role of idh2 in acrolein-induced lung injury using idh2 short hairpin RNA- (shRNA- transfected Lewis lung carcinoma (LLC cells and idh2-deficient (idh2−/− mice. Downregulation of idh2 expression increased susceptibility to acrolein via induction of apoptotic cell death due to elevated mitochondrial oxidative stress. Idh2 deficiency also promoted acrolein-induced lung injury in idh2 knockout mice through the disruption of mitochondrial redox status. In addition, acrolein-induced toxicity in idh2 shRNA-transfected LLC cells and in idh2 knockout mice was ameliorated by the antioxidant, N-acetylcysteine, through attenuation of oxidative stress resulting from idh2 deficiency. In conclusion, idh2 deficiency leads to mitochondrial redox environment deterioration, which causes acrolein-mediated apoptosis of LLC cells and acrolein-induced lung injury in idh2−/− mice. The present study supports the central role of idh2 deficiency in inducing oxidative stress resulting from acrolein-induced disruption of mitochondrial redox status in the lung.

  20. Idh2 Deficiency Exacerbates Acrolein-Induced Lung Injury through Mitochondrial Redox Environment Deterioration.

    Science.gov (United States)

    Park, Jung Hyun; Ku, Hyeong Jun; Lee, Jin Hyup; Park, Jeen-Woo

    2017-01-01

    Acrolein is known to be involved in acute lung injury and other pulmonary diseases. A number of studies have suggested that acrolein-induced toxic effects are associated with depletion of antioxidants, such as reduced glutathione and protein thiols, and production of reactive oxygen species. Mitochondrial NADP + -dependent isocitrate dehydrogenase ( idh2 ) regulates mitochondrial redox balance and reduces oxidative stress-induced cell injury via generation of NADPH. Therefore, we evaluated the role of idh2 in acrolein-induced lung injury using idh2 short hairpin RNA- (shRNA-) transfected Lewis lung carcinoma (LLC) cells and idh2 -deficient ( idh2 -/- ) mice. Downregulation of idh2 expression increased susceptibility to acrolein via induction of apoptotic cell death due to elevated mitochondrial oxidative stress. Idh2 deficiency also promoted acrolein-induced lung injury in idh2 knockout mice through the disruption of mitochondrial redox status. In addition, acrolein-induced toxicity in idh2 shRNA-transfected LLC cells and in idh2 knockout mice was ameliorated by the antioxidant, N-acetylcysteine, through attenuation of oxidative stress resulting from idh2 deficiency. In conclusion, idh2 deficiency leads to mitochondrial redox environment deterioration, which causes acrolein-mediated apoptosis of LLC cells and acrolein-induced lung injury in idh2 -/- mice. The present study supports the central role of idh2 deficiency in inducing oxidative stress resulting from acrolein-induced disruption of mitochondrial redox status in the lung.

  1. Food restriction causes low bone strength and microarchitectural deterioration in exercised growing male rats.

    Science.gov (United States)

    Hattori, Satoshi; Park, Jong-Hoon; Agata, Umon; Oda, Masaya; Higano, Michito; Aikawa, Yuki; Akimoto, Takayuki; Nabekura, Yoshiharu; Yamato, Hideyuki; Ezawa, Ikuko; Omi, Naomi

    2014-01-01

    The pathogenesis of bone disorders in young male athletes has not been well understood. We hypothesized that bone fragility is caused by low energy availability, due to insufficient food intake and excessive exercise energy expenditure in young male athletes. To examine this hypothesis, we investigated the influence of food restriction on bone strength and bone morphology in exercised growing male rats, using three-point bending test, dual-energy X-ray absormetry, and micro-computed tomography. Four-week-old male Sprague-Dawley rats were divided randomly into the following groups: the control (Con) group, exercise (Ex) group, food restriction (R) group, and food restriction plus exercise (REx) group after a 1-wk acclimatization period. Thirty-percent food restriction in the R and REx groups was carried out in comparison with that in the Con group. Voluntary running exercise was performed in the Ex and REx groups. The experimental period lasted 13 wk. At the endpoint of this experiment, the bone strength of the femurs and tibial BMD in the REx group were significantly lower than those in the Con group. Moreover, trabecular bone volume and cortical bone volume in the REx group were also significantly lower than those in the Con group. These findings indicate that food restriction causes low bone strength and microarchitectural deterioration in exercised growing male rats.

  2. Unemployment insurance and deteriorating self-rated health in 23 European countries.

    Science.gov (United States)

    Ferrarini, Tommy; Nelson, Kenneth; Sjöberg, Ola

    2014-07-01

    The global financial crisis of 2008 is likely to have repercussions on public health in Europe, not least through escalating mass unemployment, fiscal austerity measures and inadequate social protection systems. The purpose of this study is to analyse the role of unemployment insurance for deteriorating self-rated health in the working age population at the onset of the fiscal crisis in Europe. Multilevel logistic conditional change models linking institutional-level data on coverage and income replacement in unemployment insurance to individual-level panel data on self-rated health in 23 European countries at two repeated occasions, 2006 and 2009. Unemployment insurance significantly reduces transitions into self-rated ill-health and, particularly, programme coverage is important in this respect. Unemployment insurance is also of relevance for the socioeconomic gradients of health at individual level, where programme coverage significantly reduces health risks attached to educational attainment. Unemployment insurance mitigated adverse health effects both at individual and country-level during the financial crisis. Due to the centrality of programme coverage, reforms to unemployment insurance should focus on extending the number of insured people in the labour force. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  3. Dielectric Spectroscopy Analysis of Aged EVOH films with Application to Deterioration of Food Packaging Materials

    Science.gov (United States)

    Hoeller, Timothy

    2007-06-01

    Samples of EVOH films from compositions of 29 - 44 mol% ethylene content were exposed to thermal aging with and without light exposure. The results of Dielectric Spectroscopy on select samples showed Cole-Cole plots of skewed dielectric constant indicating multiple distributions of dipole relaxation times. The onset for decreases in dielectric response occurs earlier in samples exposed to elevated temperature under light exposure. Lower permittivity is exhibited in samples of higher ethylene content. Results from heat exposed samples are presented. Colorimetric analysis indicates only a slight film yellowing in one case. Raman spectroscopy on untreated films discerns changes in the C-C-O stretch associated with the alcohol. The effects of aging on microstructure may cause hindrance of molecular motion from moisture desorption. Slight material degradation occurs from film hardening presumably due to crosslinking. An electrical circuit model of the conduction processes associated with the EVOH films is presented. Dielectric analysis shows promise for monitoring material changes related to deterioration. We are also using these methods to understand Fluorescence Imaging which has been recently released for paper and plastic materials analysis. Future work may include refinement of these techniques for identification of changes in material properties correlated to packaging material barrier resistance.

  4. An Integer Batch Scheduling Model for a Single Machine with Simultaneous Learning and Deterioration Effects to Minimize Total Actual Flow Time

    Science.gov (United States)

    Yusriski, R.; Sukoyo; Samadhi, T. M. A. A.; Halim, A. H.

    2016-02-01

    In the manufacturing industry, several identical parts can be processed in batches, and setup time is needed between two consecutive batches. Since the processing times of batches are not always fixed during a scheduling period due to learning and deterioration effects, this research deals with batch scheduling problems with simultaneous learning and deterioration effects. The objective is to minimize total actual flow time, defined as a time interval between the arrival of all parts at the shop and their common due date. The decision variables are the number of batches, integer batch sizes, and the sequence of the resulting batches. This research proposes a heuristic algorithm based on the Lagrange Relaxation. The effectiveness of the proposed algorithm is determined by comparing the resulting solutions of the algorithm to the respective optimal solution obtained from the enumeration method. Numerical experience results show that the average of difference among the solutions is 0.05%.

  5. An Integer Batch Scheduling Model for a Single Machine with Simultaneous Learning and Deterioration Effects to Minimize Total Actual Flow Time

    International Nuclear Information System (INIS)

    Yusriski, R; Sukoyo; Samadhi, T M A A; Halim, A H

    2016-01-01

    In the manufacturing industry, several identical parts can be processed in batches, and setup time is needed between two consecutive batches. Since the processing times of batches are not always fixed during a scheduling period due to learning and deterioration effects, this research deals with batch scheduling problems with simultaneous learning and deterioration effects. The objective is to minimize total actual flow time, defined as a time interval between the arrival of all parts at the shop and their common due date. The decision variables are the number of batches, integer batch sizes, and the sequence of the resulting batches. This research proposes a heuristic algorithm based on the Lagrange Relaxation. The effectiveness of the proposed algorithm is determined by comparing the resulting solutions of the algorithm to the respective optimal solution obtained from the enumeration method. Numerical experience results show that the average of difference among the solutions is 0.05%. (paper)

  6. Introduction of threatened species in a fragmented and deteriorated landscape

    NARCIS (Netherlands)

    Vergeer, P.

    2005-01-01

    In The Netherlands, heathlands and species-rich grassland are strongly reduced in both area and habitat quality mainly due to fragmentation, eutrophication and acidification. As a result, many plant and animal species have become (locally) extinct, or are threatened by extinction as they are forced

  7. The influence of combustion derived pollutants on limestone deterioration

    DEFF Research Database (Denmark)

    Johnson, JB; Montgomery, Melanie; Thompson, GE

    1996-01-01

    10(-4) mu g cm(-2) s(-1), the pollutants were assessed individually and in various combinations, along with ozone as oxidant, at 84% RH with dry or water-wetted surfaces. The degradation was followed by analysis of exposed stone, for Cl-, SO42- and NO3-, and of run-off solution for Ca2+, in addition......% reaction (mass transport control) and V-D values of 2.2 and 5.3 mm s(-1), at 84% RH and on wetted surfaces, respectively. The reactivity of SO2 rose from 2.5 to 35%, and V-D from 1 to 2.9 mm s(-1), from conditions of 84% RH to those with the presence of water, NO2 and O-3. Similarly, the reactivity of NO2......, chemical constitution and transfer, smoke particle size distribution should also be considered in any possible action on limestone. Concerning naturally exposed samples, non-wetted surface reaction products tended to reduce the attack of pollutants, but had no resisting effect when wetted....

  8. Assisted bicycle training delays functional deterioration in boys with Duchenne muscular dystrophy: the randomized controlled trial "no use is disuse".

    Science.gov (United States)

    Jansen, Merel; van Alfen, Nens; Geurts, Alexander C H; de Groot, Imelda J M

    2013-01-01

    Physical training might delay the functional deterioration caused by disuse in boys with Duchenne muscular dystrophy (DMD). The "No Use Is Disuse" study is the first explorative, randomized controlled trial in boys with DMD to examine whether assisted bicycle training is feasible, safe, and beneficial. Ambulatory and recently wheelchair-dependent boys with DMD were allocated to the intervention or control group. The intervention group received assisted bicycle training of the legs and arms during 24 weeks. The control group received the same training after a waiting period of 24 weeks. The primary study outcomes were the Motor Function Measure (MFM) and the Assisted 6-Minute Cycling Test (A6MCT). Group differences were examined by an analysis of covariance. Thirty boys (mean age 10.5 ± 2.6 years, 18 ambulant and 12 wheelchair-dependent) were allocated to the intervention (n = 17) or the control (n = 13) group. All boys in the intervention group (except one) completed the training. After 24 weeks, the total MFM score remained stable in the intervention group, whereas it had significantly decreased in the control group (Δ = 4.9, 95% confidence interval = 2.2-7.6). No significant group differences were found for the A6MCT. No serious adverse events were observed. Our results suggest that assisted bicycle training of the legs and arms is feasible and safe for both ambulant and wheelchair-dependent children and may decline the deterioration due to disuse. Progressive deterioration, however, may compromise the design of trials for DMD.

  9. A simple model for the dynamic analysis of deteriorating structures

    International Nuclear Information System (INIS)

    Andreaus, U.; Ceradini, G.; D'Asdia, P.

    1983-01-01

    A simple model exhibiting a multi-linear constitutive law is presented which describes the behaviour of structural members and subassemblages under severe cyclic loading. The proposed model allows for: 1) pinched form of force-displacement diagrams due to, e.g., cracks in reinforced concrete members and masonry panels; 2) slippage effects due to lack of bond of steel bars in reinforced concrete and clearances in steel bolted connections; 3) post-buckling behaviour of subassemblages with unstable members; 4) cumulative damage affecting strength and/or stiffness at low cycle fatigue. The parameters governing the model behaviour have to be estimated on the basis of experimental results. The model is well suitable for analysis under statically applied cyclic displacements and forces, and under earthquake excitation. An X-type bracing system is then worked out where the member behaviour is schematized according to the proposed model. (orig.)

  10. Methodology of homogeneous and non-homogeneous Markov Chains for modeling bridge element deterioration.

    Science.gov (United States)

    2008-08-01

    Bridge management is an important activity of transportation agencies in the US : and in many other countries. A critical aspect of bridge management is to reliably predict : the deterioration of bridge structures, so that appropriate or optimal acti...

  11. Biodegradable Microparticles for Simultaneous Detection of Counterfeit and Deteriorated Edible Products

    NARCIS (Netherlands)

    Rehor, Ivan; van Vreeswijk, Sophie; Vermonden, Tina; Hennink, Wim E.; Kegel, Willem K.; Eral, Huseyin Burak

    2017-01-01

    In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the

  12. Early warning scores: a sign of deterioration in patients and systems.

    Science.gov (United States)

    Fox, Adrian; Elliott, Naomi

    2015-04-01

    The early warning score system is a decision-making tool that has a simple design, yet its implementation in healthcare organisations is proving complex. This article reports the results of a survey that evaluated nurses' experiences of using the National Early Warning Score (NEWS) in an acute hospital in Ireland. Staff reported that the NEWS was easy to use, did not increase workload and enhanced their ability to identify deteriorating patients. However, they also identified problems related to doctors' delayed response times, doctors' lack of training in the use of the tool, and a failure by doctors to modify trigger parameters for patients with chronic conditions. NEWS enhances nurses' roles in early detection of patient deterioration, but delays in response times by doctors expose systematic flaws in health care. This suggests that it is not only an indicator of patient deterioration, but also of deteriorating healthcare systems.

  13. Toward better understanding of postharvest deterioration: biochemical changes in stored cassava (Manihot esculenta Crantz) roots.

    Science.gov (United States)

    Uarrota, Virgílio Gavicho; Nunes, Eduardo da Costa; Peruch, Luiz Augusto Martins; Neubert, Enilto de Oliveira; Coelho, Bianca; Moresco, Rodolfo; Domínguez, Moralba Garcia; Sánchez, Teresa; Meléndez, Jorge Luis Luna; Dufour, Dominique; Ceballos, Hernan; Becerra Lopez-Lavalle, Luis Augusto; Hershey, Clair; Rocha, Miguel; Maraschin, Marcelo

    2016-05-01

    Food losses can occur during production, postharvest, and processing stages in the supply chain. With the onset of worldwide food shortages, interest in reducing postharvest losses in cassava has been increasing. In this research, the main goal was to evaluate biochemical changes and identify the metabolites involved in the deterioration of cassava roots. We found that high levels of ascorbic acid (AsA), polyphenol oxidase (PPO), dry matter, and proteins are correlated with overall lower rates of deterioration. On the other hand, soluble sugars such as glucose and fructose, as well as organic acids, mainly, succinic acid, seem to be upregulated during storage and may play a role in the deterioration of cassava roots. Cultivar Branco (BRA) was most resilient to postharvest physiological deterioration (PPD), while Oriental (ORI) was the most susceptible. Our findings suggest that PPO, AsA, and proteins may play a distinct role in PPD delay.

  14. Early warning scores: a sign of deterioration in patients and systems

    LENUS (Irish Health Repository)

    Fox, A

    2015-02-01

    The early warning score is a decision-making tool that has a simple design, yet its implementation in healthcare organisations is proving complex. This article reports the results of a survey that evaluated the nurses’ experiences of using the NEWS (National Early Warning Score) in an acute hospital in Ireland. Staff reported that the NEWS was easy to use, did not increase workload and enhanced their ability to identify deteriorating patients. However, they also identified problems related to doctors’ delayed response times, doctors lack of training in the use of the tool, and a failure by doctors to modify parameters for patients with chronic conditions. NEWS enhances nurses’ role in early detection of patient deterioration but delays in response times by doctors, exposes systematic flaws in healthcare. This suggests that it is not only an indicator of patient deterioration but also of deteriorating healthcare systems.

  15. Final Amendments to Delegation of Authority Provisions in the Prevention of Significant Deterioration Permitting Program

    Science.gov (United States)

    finalized amendments to the New Source Review (NSR) Prevention of Significant Deterioration (PSD) permitting program that will allow the EPA to delegate administration of the program to interested and qualified tribal agencies.

  16. Conclusions from the investigation of deterioration of joints in concrete pavements : intrans project reports.

    Science.gov (United States)

    2016-02-01

    Premature deterioration of concrete at the joints in concrete pavements and parking lots has been reported across the northern : states. The distress may first appear as shadowing when microcracking near the joints traps water, or as cracks parallel ...

  17. Deteriorating effects of lichen and microbial colonization of carbonate building rocks in the Romanesque churches of Segovia (Spain)

    International Nuclear Information System (INIS)

    Rios, Asuncion de los; Camara, Beatriz; Garcia del Cura, Ma Angeles; Rico, Victor J.; Galvan, Virginia; Ascaso, Carmen

    2009-01-01

    In this study, the deterioration effects of lichens and other lithobionts in a temperate mesothermal climate were explored. We examined samples of dolostone and limestone rocks with visible signs of biodeterioration taken from the exterior wall surfaces of four Romanesque churches in Segovia (Spain): San Lorenzo, San Martin, San Millan and La Vera Cruz. Biofilms developing on the lithic substrate were analyzed by scanning electron microscopy. The most common lichen species found in the samples were recorded. Fungal cultures were then obtained from these carbonate rocks and characterized by sequencing Internal Transcribed Spacers (ITS). Through scanning electron microscopy in back-scattered electron mode, fungi (lichenized and non-lichenized) were observed as the most frequent microorganisms occurring at sites showing signs of biodeterioration. The colonization process was especially conditioned by the porosity characteristics of the stone used in these buildings. While in dolostones, microorganisms mainly occupied spaces comprising the rock's intercrystalline porosity, in bioclastic dolomitized limestones, fungal colonization seemed to be more associated with moldic porosity. Microbial biofilms make close contact with the substrate, and thus probably cause significant deterioration of the underlying materials. We describe the different processes of stone alteration induced by fungal colonization and discuss the implications of these processes for the design of treatments to prevent biodeterioration

  18. Deteriorating effects of lichen and microbial colonization of carbonate building rocks in the Romanesque churches of Segovia (Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Rios, Asuncion de los [Instituto de Recursos Naturales, Centro de Ciencias Medioambientales (CSIC), Serrano 115 dpdo., 28006 Madrid (Spain)], E-mail: arios@ccma.csic.es; Camara, Beatriz [Instituto de Recursos Naturales, Centro de Ciencias Medioambientales (CSIC), Serrano 115 dpdo., 28006 Madrid (Spain); Garcia del Cura, Ma Angeles [Instituto de Geologia Economica CSIC-UCM, Laboratorio de Petrologia Aplicada, Unidad Asociada CSIC-UA, Alicante (Spain); Rico, Victor J. [Departamento de Biologia Vegetal II, Facultad de Farmacia, Universidad Complutense, 28040 Madrid (Spain); Galvan, Virginia [Facultad Patrimonio Cultural, Universidad SEK, Convento de Santa Cruz la Real, 40003 Segovia (Spain); Ascaso, Carmen [Instituto de Recursos Naturales, Centro de Ciencias Medioambientales (CSIC), Serrano 115 dpdo., 28006 Madrid (Spain)

    2009-01-15

    In this study, the deterioration effects of lichens and other lithobionts in a temperate mesothermal climate were explored. We examined samples of dolostone and limestone rocks with visible signs of biodeterioration taken from the exterior wall surfaces of four Romanesque churches in Segovia (Spain): San Lorenzo, San Martin, San Millan and La Vera Cruz. Biofilms developing on the lithic substrate were analyzed by scanning electron microscopy. The most common lichen species found in the samples were recorded. Fungal cultures were then obtained from these carbonate rocks and characterized by sequencing Internal Transcribed Spacers (ITS). Through scanning electron microscopy in back-scattered electron mode, fungi (lichenized and non-lichenized) were observed as the most frequent microorganisms occurring at sites showing signs of biodeterioration. The colonization process was especially conditioned by the porosity characteristics of the stone used in these buildings. While in dolostones, microorganisms mainly occupied spaces comprising the rock's intercrystalline porosity, in bioclastic dolomitized limestones, fungal colonization seemed to be more associated with moldic porosity. Microbial biofilms make close contact with the substrate, and thus probably cause significant deterioration of the underlying materials. We describe the different processes of stone alteration induced by fungal colonization and discuss the implications of these processes for the design of treatments to prevent biodeterioration.

  19. Changes in contact angle providing evidence for surface alteration in multi-component solid foods

    Science.gov (United States)

    Reinke, Svenja K.; Hauf, Katharina; Vieira, Josélio; Heinrich, Stefan; Palzer, Stefan

    2015-11-01

    Chocolate blooming, one of the major problems in the confectionery industry, is the formation of visible white spots or a greyish haze on the surface of chocolate products due to large sugar or fat crystals on the surface. This leads to aesthetic changes and deterioration of taste and thus large sales losses for the confectionery industry due to consumer complaints. Chocolate blooming is often related to migration of lipids or sugar molecules to the chocolate surface, where they recrystallize with an associated polymorphic change of crystal structure on the surface. The wetting behaviour from contact angle measurements gives further insight into surface properties and is needed to determine surface energies and to evaluate possible migration mechanisms and preferred pathways. Therefore, an equilibrium contact angle is needed which is not directly accessible and is influenced by surface texture and interaction between solid and test liquid. In this study, the surface of cocoa butter and conventional chocolates was characterized by measuring the contact angle with the sessile drop protocol. The influence of roughness, test liquid and pre-crystallization of the samples as well as the storage temperature were investigated. In case of no pre-crystallization, a change in surface properties due to storage at 20 °C was detected, whereas samples stored at 30 °C showed the same wetting behaviour as fresh samples. This is associated with polymorphic transformation from thermodynamically less stable crystals to more stable configurations.

  20. Changes in contact angle providing evidence for surface alteration in multi-component solid foods

    International Nuclear Information System (INIS)

    Reinke, Svenja K; Hauf, Katharina; Heinrich, Stefan; Vieira, Josélio; Palzer, Stefan

    2015-01-01

    Chocolate blooming, one of the major problems in the confectionery industry, is the formation of visible white spots or a greyish haze on the surface of chocolate products due to large sugar or fat crystals on the surface. This leads to aesthetic changes and deterioration of taste and thus large sales losses for the confectionery industry due to consumer complaints. Chocolate blooming is often related to migration of lipids or sugar molecules to the chocolate surface, where they recrystallize with an associated polymorphic change of crystal structure on the surface. The wetting behaviour from contact angle measurements gives further insight into surface properties and is needed to determine surface energies and to evaluate possible migration mechanisms and preferred pathways. Therefore, an equilibrium contact angle is needed which is not directly accessible and is influenced by surface texture and interaction between solid and test liquid. In this study, the surface of cocoa butter and conventional chocolates was characterized by measuring the contact angle with the sessile drop protocol. The influence of roughness, test liquid and pre-crystallization of the samples as well as the storage temperature were investigated. In case of no pre-crystallization, a change in surface properties due to storage at 20 °C was detected, whereas samples stored at 30 °C showed the same wetting behaviour as fresh samples. This is associated with polymorphic transformation from thermodynamically less stable crystals to more stable configurations. (paper)

  1. Usefulness of Bronchial Thermoplasty for Patients with a Deteriorating Lung Function.

    Science.gov (United States)

    Minami, Daisuke; Ando, Chihiro; Nakasuka, Takamasa; Iwamoto, Yoshitaka; Sato, Ken; Fujiwara, Keiichi; Shibayama, Takuo; Yonei, Toshiro; Sato, Toshio

    2018-01-01

    Bronchial thermoplasty is a novel procedure for patients with severe asthma showing a stable lung function. We herein report two cases with a deteriorating lung function. The lung function tended to improve in one case, while the other case discontinued mepolizumab medication after the procedure. Treatment was performed safely under general anesthesia in both cases. The use of bronchial thermoplasty may therefore be useful for the treatment of patients with a deteriorating lung function.

  2. Hospital in the Home nurses' recognition and response to clinical deterioration.

    Science.gov (United States)

    Gray, Erika; Currey, Judy; Considine, Julie

    2017-09-19

    To obtain an understanding of how Hospital in the Home (HITH) nurses recognise and respond to clinical deterioration in patients receiving care at home or in their usual place of residence. Recognising and responding to clinical deterioration is an international safety priority and a key nursing responsibility. Despite an increase in care delivery in home environments, how HITH nurses recognise and respond to clinical deterioration is not yet fully understood. A prospective, descriptive exploratory design was used. A survey containing questions related to participant characteristics and 10 patient scenarios was used to collect data from 47 nurses employed in the HITH units of three major health services in Melbourne, Australia. The 10 scenarios reflected typical HITH patients and included medical history and clinical assessment findings (respiratory rate, oxygen saturation, heart rate, blood pressure, temperature, conscious state and pain score). The three major findings from this study were that: (i) nurse and patient characteristics influenced HITH nurses' assessment decisions; (ii) the cues used by HITH nurses to recognise clinical deterioration varied according to the clinical context; and (iii) although HITH nurses work in an autonomous role, they engage in collaborative practice when responding to clinical deterioration. Hospital in the Home nurses play a fundamental role in patient assessment, and the context in which they recognise and respond to deterioration is markedly different to that of hospital nurses. The assessment, measurement and interpretation of clinical data are a nursing responsibility that is crucial to early recognition and response to clinical deterioration. The capacity of HITH services to care for increasing numbers of patients in their home environment, and to promptly recognise and respond to clinical deterioration should it occur, is fundamental to safety within the healthcare system. Hospital in the Home nurses are integral to a

  3. A review of educational strategies to improve nurses' roles in recognizing and responding to deteriorating patients.

    Science.gov (United States)

    Liaw, S Y; Scherpbier, A; Klainin-Yobas, P; Rethans, J-J

    2011-09-01

    Physiological instability leading to clinical deterioration often precedes cardiopulmonary arrest. Nurses, who have the most frequent patient contact and responsibility for ongoing monitoring of patients, play a crucial role in recognizing and responding to clinical deterioration. The importance of education in supporting such a role has been addressed in numerous studies. This study aimed to identify nurses' educational needs and explore educational strategies to enhance their ability in recognizing and managing wards with deteriorating patients. A literature search from databases (2000-2010) was undertaken to include papers that identified the educational needs of ward nurses and existing educational programmes related to the care of deteriorating patients. Twenty-six papers were included in this review. Findings identified the educational need to empower nurses with the appropriate knowledge and skills in recognizing, reporting and responding to patient deterioration. The review of existing educational programmes and their outcomes identified valuable teaching information and strategies, and areas that could be improved in meeting nurses' educational needs. The review has highlighted important aspects of patient safety in clinical deterioration that could be further addressed by educational strategies targeting the role of ward nurses. These strategies include: utilizing clinical decision-making models to develop nurses' decision making skills; developing a standardized tool for systematic nursing assessment and management of clinical deterioration; incorporating training in clinical deterioration as a core competence of pre-registered nursing education; providing vital signs training to nursing assistants; and conducting more rigorous studies to evaluate the effectiveness of the educational programmes. © 2011 The Authors. International Nursing Review © 2011 International Council of Nurses.

  4. Do Work Characteristics Predict Health Deterioration Among Employees with Chronic Diseases?

    Science.gov (United States)

    de Wind, Astrid; Boot, Cécile R L; Sewdas, Ranu; Scharn, Micky; van den Heuvel, Swenne G; van der Beek, Allard J

    2017-06-29

    Purpose In our ageing workforce, the increasing numbers of employees with chronic diseases are encouraged to prolong their working lives. It is important to prevent health deterioration in this vulnerable group. This study aims to investigate whether work characteristics predict health deterioration over a 3-year period among employees with (1) chronic diseases, and, more specifically, (2) musculoskeletal and psychological disorders. Methods The study population consisted of 5600 employees aged 45-64 years with a chronic disease, who participated in the Dutch Study on Transitions in Employment, Ability and Motivation (STREAM). Information on work characteristics was derived from the baseline questionnaire. Health deterioration was defined as a decrease in general health (SF-12) between baseline and follow-up (1-3 years). Crude and adjusted logistic regression analyses were performed to investigate prediction of health deterioration by work characteristics. Subgroup analyses were performed for employees with musculoskeletal and psychological disorders. Results At follow-up, 19.2% of the employees reported health deterioration (N = 1075). Higher social support of colleagues or supervisor predicted health deterioration in the crude analyses in the total group, and the groups with either musculoskeletal or psychological disorders (ORs 1.11-1.42). This effect was not found anymore in the adjusted analyses. The other work characteristics did not predict health deterioration in any group. Conclusions This study did not support our hypothesis that work characteristics predict health deterioration among employees with chronic diseases. As our study population succeeded continuing employment to 45 years and beyond, it was probably a relatively healthy selection of employees.

  5. Effect of pollutant gases on electrical insulators deterioration

    Directory of Open Access Journals (Sweden)

    Zamarad, A.

    2000-06-01

    Full Text Available In this work ceramic materials as electrical insulators have been exposed in laboratory-based chambers. Water contact angle and FTIR of the surface before and after pollutant exposures have been studied. The results indicated that the reaction between the policrete and the atmospheric pollutant produce some salts deposits, some hydrolysis over the resin surface, modifying water contact angle.

    En este trabajo se exponen en cámaras atmosféricas de laboratorio materiales cerámicos usados como aislantes eléctricos. Se realiza un estudio de la superficie expuesta a la degradación medioambiental a través del ángulo de contacto de una gota de agua y de las sales depositadas, determinándose éstas últimas por espectroscopia infrarroja. Los resultados revelan el depósito de varias sales sobre la superficie de la muestra, e hidrólisis sobre la superficie de la resina, modificando el ángulo de contacto.

  6. DIFFERENTIAL PATTERNS OF PREMORBID SOCIAL AND ACADEMIC DETERIORATION IN DEFICIT AND NONDEFICIT SCHIZOPHRENIA

    Science.gov (United States)

    Strauss, Gregory P.; Allen, Daniel N.; Miski, Pinar; Buchanan, Robert W.; Kirkpatrick, Brian; Carpenter, William T.

    2011-01-01

    Numerous studies indicate that social dysfunction is associated with negative symptoms of schizophrenia during the chronic phase of illness. However, it is unclear whether social abnormalities exist during the premorbid phase in people who later develop schizophrenia with prominent negative symptoms, or whether social functioning becomes progressively worse in these individuals from childhood to late adolescence. The current study examined differences in academic and social premorbid functioning in people with schizophrenia meeting criteria for deficit (i.e., primary and enduring negative symptoms) (DS: n=74) and non-deficit forms of schizophrenia (ND: n=271). Premorbid social and academic functioning was assessed for childhood, early adolescence, and late adolescence developmental periods on the Premorbid Adjustment Scale (PAS). Results indicated that both DS and ND participants showed deterioration in social and academic functioning from childhood to late adolescence. However, while ND schizophrenia demonstrated greater deterioration of academic compared to social premorbid functioning from childhood to late adolescence, the DS group exhibited comparable deterioration across both premorbid domains, with more severe social deterioration than the ND group. Findings suggest that people with DS show poorer social premorbid adjustment than those with ND as early as childhood, and are particularly susceptible to accelerated deterioration as the onset of schizophrenia becomes imminent. Thus, poor premorbid social adjustment and significant social deterioration from childhood to adolescence may be a hallmark feature of people who later go on to develop prominent negative symptoms and a unique marker for the DS subtype of schizophrenia. PMID:22130110

  7. Deterioration of edible oils during food processing by ultrasound.

    Science.gov (United States)

    Chemat, F; Grondin, I; Shum Cheong Sing, A; Smadja, J

    2004-01-01

    During food emulsification and processing of sunflower oil (most used edible oil), a metallic and rancid odour has been detected only for insonated oil and foods. Some off-flavour compounds (hexanal and hept-2-enal) resulting from the sono-degradation of sunflower oil have been identified. A wide variety of analytical techniques (GC determination of fatty acids, UV spectroscopy, free fatty acids and GC/MS) were used to follow the quality of insonated sunflower oil and emulsion. Different edible oils (olive, sunflower, soybean, em leader ) show significant changes in their composition (chemical and flavour) due to ultrasound treatment.

  8. Macroscópical morphology of deterioration of the stone in the Cathedral of Almería/Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1991-06-01

    Full Text Available The prevailing winds in the area, associated with an important rising damp are the main natural factors of deterioration that affect the Cathedral of Almería. Certain unfortunate maintenance Jobs carried out as well as the bombardments and machine-gunning on the building during the Civil War can be indicated as anthropogenical factors of deterioration. The only lithotype used in the construction is a dolomitic limestone of high porosity from quarries near the city. The increase in volume in capillaries and interstices, related whith the presence of salts, and the dissolution, due to the great solubility of the natural magnesium salts which can produce dedolomitization of the stone, are the main deterioration mechanisms. This leads to indicators of deterioration with a typical morphology consisting of openings in all its manifestations (pitting, alveolar erosions and craters especially on the high and low parts of the building where the wind and humidity, respectively, are more intense. The anthropogenical deterioration also has the shape of openings, such as the impact of bullets and obuses on the Southern facade and the grooves made for electric cables throughout the building. Diverse restorations have introduced tensions in the materials which have led to decohesions at different degrees (disaggregations, disintegrations and grain disgregations in the interior of the temple and cloister. The building is in a state of deterioration of a certain significance which essentially affects its esthetics. The speed in the degrading process observed in some areas calls for action for its maintenance.

    Los vientos reinantes en la zona, asociados a una importante humedad ascendente, son los principales factores naturales de alteración que afectan a la Catedral de Almería. Pueden señalarse como factores antropogénicos de alteración ciertas desafortunadas labores de mantenimiento llevadas a cabo, así como, aunque con carácter episódico, los

  9. Use of Gypsum as a Preventive Measure for Strength Deterioration during Curing in Class F Fly Ash Geopolymer System

    Science.gov (United States)

    Jun, Yubin; Oh, Jae Eun

    2015-01-01

    This study discusses strength deterioration during the curing process of fly ash geopolymer and the use of CaSO4·2H2O (gypsum) as a deterioration remedy when the ash was synthesized using a 10M NaOH and Na-silicate solution. The strength decline was mainly due to the widespread formation of nanometer-sized cracks that were related to excessive Na and Si concentrations at an early age. Use of 2 wt% CaSO4·2H2O resulted in the best measured strength by temporarily reducing Na and Si concentrations; Na was absorbed by SO42−, up to 11% in the matrix within one day, and formed Na2SO4 (thenardite), which gradually dissolved over time, slowly releasing Na ions. However, more than 4% gypsum suppressed overall strength development because too many Na ions were locked into Na2SO4 and could not participate in geopolymerization. The addition of gypsum impeded glass dissolution and even halted the process when more than 4% gypsum was used.

  10. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins

    Energy Technology Data Exchange (ETDEWEB)

    Cappitelli, Francesca [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)], E-mail: francesca.cappitelli@unimi.it; Principi, Pamela [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy); Pedrazzani, Roberta [Dipartimento di Ingegneria Meccanica, University of Brescia, Via Branze 38, 25123 Brescia (Italy); Toniolo, Lucia [Dipartimento di Chimica, Materiali e Ingegneria Chimica ' Giulio Natta' , Politecnico di Milano, Via Mancinelli 7, 20133 Milan (Italy); Sorlini, Claudia [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and {alpha}-, {beta}-and {gamma}-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  11. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins.

    Science.gov (United States)

    Cappitelli, Francesca; Principi, Pamela; Pedrazzani, Roberta; Toniolo, Lucia; Sorlini, Claudia

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and alpha-, beta-and gamma-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  12. Intrathoracic impedance and ultrasound lung comets in heart failure deterioration monitoring.

    Science.gov (United States)

    Maines, Massimiliano; Catanzariti, Domenico; Angheben, Carlo; Valsecchi, Sergio; Comisso, Jennifer; Vergara, Giuseppe

    2011-08-01

    Echographic examination of the lung surface may reveal multiple ultrasound lung comets (ULCs) originating from water-thickened interlobular septa. These images were demonstrated to be useful for noninvasive assessment of interstitial pulmonary edema. Similarly, the correlation between implantable defibrillator-measured intrathoracic impedance and pulmonary capillary wedge pressure (PCWP) was demonstrated in heart failure (HF) patients. The aims of this analysis were to assess the agreement between defibrillator-detected impedance decrease and the presence of ULCs, as well as to compare the performance of the impedance-detection algorithm and the ULCs assessment in predicting HF worsening. We studied 23 HF patients implanted with a defibrillator capable of intrathoracic impedance measurement and alerting for fluid accumulation diagnosis. At regular follow-up and at visits for HF decompensation or device alert, clinical status was assessed, chest ultrasound was performed, and PCWP was noninvasively estimated with Doppler echocardiography. During 23 ± 11 months of follow-up, 45 paired assessments of defibrillator-measured intrathoracic impedance and ULCs were performed. The number of ULCs resulted significantly correlated to the paired PCWP estimations (r = 0.917, P < 0.001) and to the impedance fluid index (r = 0.669, P < 0.001). During follow-up, 12 episodes of HF decompensation were reported in 12 patients. The impedance alert detected clinical HF deterioration with 92% sensitivity and 69% positive predictive value. The presence of ≥5 ULCs showed 83% sensitivity and 91% positive predictive value. These data demonstrate the correlation between intrathoracic impedance and the number of ULCs at chest ultrasound, and a good agreement between the defibrillator warning for fluid index and the detection of multiple ULCs. ©2011, The Authors. Journal compilation ©2011 Wiley Periodicals, Inc.

  13. Mechanisms of tactile sensory deterioration amongst the elderly.

    Science.gov (United States)

    Skedung, Lisa; El Rawadi, Charles; Arvidsson, Martin; Farcet, Céline; Luengo, Gustavo S; Breton, Lionel; Rutland, Mark W

    2018-04-19

    It is known that roughness-smoothness, hardness-softness, stickiness-slipperiness and warm-cold are predominant perceptual dimensions in macro-, micro- and nano- texture perception. However, it is not clear to what extent active tactile texture discrimination remains intact with age. The general decrease in tactile ability induces physical and emotional dysfunction in elderly, and has increasing significance for an aging population. We report a method to quantify tactile acuity based on blinded active exploration of systematically varying micro-textured surfaces and a same-different paradigm. It reveals that elderly participants show significantly reduced fine texture discrimination ability. The elderly group also displays statistically lower finger friction coefficient, moisture and elasticity, suggesting a link. However, a subpopulation of the elderly retains discrimination ability irrespective of cutaneous condition and this can be related to a higher density of somatosensory receptors on the finger pads. Skin tribology is thus not the primary reason for decline of tactile discrimination with age. The remediation of cutaneous properties through rehydration, however leads to a significantly improved tactile acuity. This indicates unambiguously that neurological tactile loss can be temporarily compensated by restoring the cutaneous contact mechanics. Such mechanical restoration of tactile ability has the potential to increase the quality of life in elderly.

  14. The impact of in-hospital nutritional status deterioration on treatment outcome of adult gastroenterological patients

    Directory of Open Access Journals (Sweden)

    Roganović Branka

    2016-01-01

    Full Text Available Background/Aim. In the current literature, data on impact of intrahospital changes in patients’ nutritional status on the treatment outcome are limited. The aim of this study was to investigate the relationship between nutritional status deterioration and the treatment outcome among hospitalized gastroenterological patients. Methods. In 650 adult gastroenterological patients nutritional status on admission and at discharge was evaluated using the 6 nutritional status assessment parameters: body mass index, triceps skinfold thickness, mid-upper arm muscle circumference, serum albumin concentration, lymphocyte count and unintentional weight loss. The influence on treatment outcome was tested for the nutritional status on admission, nutritional status at discharge and intrahospital nutritional status deterioration. Results. The incidence of favorable outcome in the non-undernourished and undernourished patients on admission was in the range 93.4-97.3% and 81.2- 91.2%, respectively. The incidence of favorable outcome in the non-undernourished and undernourished patients at discharge was in the range 94-97.4% and 80.8-88.1%, respectively. Favorable outcomes were obtained in 95.6-98.9% of the patients without nutritional status deterioration and in 87.1-90.3% of the patients with nutritional status deterioration. Intrahospital nutritional status deterioration significantly influenced the outcome, no matter what assessment parameter had been used (p < 0.001 for all the applied parameters. Furthermore, only the deterioration of nutritional status was found to be an independent predictor of treatment outcome (multivariate analysis Forwald Wald, p £ 0.001; relative risk (RR = 0.104-0.350; confidence intervals (CI = 0.037-0.186/0.297-0.657. Conclusion. Deterioration of nutritional status is an independent predictor of adverse outcome.

  15. Mechanisms of deterioration of intermediate moisture food systems

    Science.gov (United States)

    Labuza, T. P.

    1972-01-01

    A study of shelf stability in intermediate moisture foods was made. Major efforts were made to control lipid oxidation and nonenzymatic browning. In order to determine means of preventing these reactions, model systems were developed having the same water activity content relationship of intermediate moisture foods. Models were based on a cellulose-lipid and protein-lipid system with glycerol added as the humectant. Experiments with both systems indicate that lipid oxidation is promoted significantly in the intermediate moisture range. The effect appeared to be related to increased mobility of either reactants or catalysts, since when the amount of water in the system reached a level where capillary condensation occurred and thus free water was present, the rates of oxidation increased. With added glycerol, which is water soluble and thus increases the amount of mobile phase, the increase in oxidation rate occurs at a lower relative humidity. The rates of oxidation were maximized at 61% RH and decreased again at 75% RH probably due to dilution. No significant non-enzymatic browning occurred in the protein-lipid systems. Prevention of oxidation by the use of metal chelating agents was enhanced in the cellulose system, whereas, with protein present, the lipid soluble chain terminating antioxidants (such as BHA) worked equally as well. Preliminary studies of foods adjusted to the intermediate moisture range bear out the results of oxidation in model systems. It can be concluded that for most fat containing intermediate moisture foods, rancidity will be the reaction most limiting stability.

  16. Diplopia due to Dacryops

    Directory of Open Access Journals (Sweden)

    Rahmi Duman

    2013-01-01

    Full Text Available Dacryops is a lacrimal ductal cyst. It is known that it can cause globe displacement, motility restriction, and proptosis because of the mass effect. Diplopia due to dacryops has not been reported previously. Here, we present a 57-year-old man with binocular horizontal diplopia that occurred during left direction gaze due to dacryops.

  17. Sclerostin antibody inhibits skeletal deterioration in mice exposed to partial weight-bearing

    Science.gov (United States)

    Spatz, J. M.; Ellman, R.; Cloutier, A. M.; Louis, L.; van Vliet, M.; Dwyer, D.; Stolina, M.; Ke, H. Z.; Bouxsein, M. L.

    2017-02-01

    Whereas much is known regarding the musculoskeletal responses to full unloading, little is known about the physiological effects and response to pharmacological agents in partial unloading (e.g. Moon and Mars) environments. To address this, we used a previously developed ground-based model of partial weight-bearing (PWB) that allows chronic exposure to reduced weight-bearing in mice to determine the effects of murine sclerostin antibody (SclAbII) on bone microstructure and strength across different levels of mechanical unloading. We hypothesize that treatment with SclAbII would improve bone mass, microarchitecture and strength in all loading conditions, but that there would be a greater skeletal response in the normally loaded mice than in partially unloaded mice suggesting the importance of combined countermeasures for exploration-class long duration spaceflight missions. Eleven-week-old female mice were assigned to one of four loading groups: normal weight-bearing controls (CON) or weight-bearing at 20% (PWB20), 40% (PWB40) or 70% (PWB70) of normal. Mice in each group received either SclAbII (25 mg/kg) or vehicle (VEH) via twice weekly subcutaneous injection for 3 weeks. In partially-unloaded VEH-treated groups, leg BMD decreased -5 to -10% in a load-dependent manner. SclAbII treatment completely inhibited bone deterioration due to PWB, with bone properties in SclAbII-treated groups being equal to or greater than those of CON, VEH-treated mice. SclAbII treatment increased leg BMD from +14 to +18% in the PWB groups and 30 ± 3% in CON (p astronaut bone loss during terrestrial solar system exploration.

  18. A 58-Year Old Male with Cognitive Deteriorations Caused by Septum Pellucidum Cyst: A Case Report

    Directory of Open Access Journals (Sweden)

    Li-Ming Chen

    2017-09-01

    Full Text Available Dementia is known to be induced by vascular dementia and certain neurodegenerative diseases. The presenting features of disordered memory, intellect and personality often result in referral to a neurologist initially. Septum pellucidum cyst (SPC is a rare clinical finding and defined as a cystic structure between the lateral ventricles. SPC induced memory disorder and dementia has been seldom reported in which the clinical features are atypical and can be misdiagnosed. The main difficulty is to establish a correlation between symptoms and the cyst. When indicated, the treatment is essentially surgical and the ideal operative technique is also a matter of debate. Here, we reported a 58-year-male Chinese patient who presented with memory impairment 1 year ago. Both the physical and laboratory examinations were performed to evaluate the general conditions of the patient. Brain magnetic resonance imaging (MRI was applied to observe SPC and the neighboring brain structures. Mini-Mental State Exam (MMSE and Montreal Cognitive Assessment (MoCA were used to assess cognitive function. The results of the patient’s laboratory examinations were normal. However, the patient exhibited severe sleeplessness along with cognitive deteriorations despite short-term (less than 2 weeks use of benzodiazepines with regular dose. MRI fulfills the consensus criteria for clinical diagnosis of SPC. Furthermore, the results of MMSE and MoCA were showed mild cognitive impairment (MCI before the treatment of SPC. After neuroendoscopic fenestration of SPC, the patient’s syndromes were disappeared, and his cognitive function was improved. In conclusion, the patient’s symptoms were due to a secondary lesion attributed to the cyst. Comprehensive clinical evaluation and MRI help diagnose SPC induced dementia.

  19. Evolution of the thickness of the aluminum oxide film due to the pH of the cooling water and surface temperature of the fuel elements clad of a nuclear reactor

    International Nuclear Information System (INIS)

    Babiche, Ivan

    2013-01-01

    This paper describes the mechanism of growth of a film of aluminum oxide on an alloy of the same material, which serves as a protective surface being the constituent material of the RP-10 nuclear reactor fuel elements clads. The most influential parameters on the growth of this film are: the pH of the cooling water and the clad surface temperature of the fuel element. For this study, a mathematical model relating the evolution of the aluminum oxide layer thickness over the time, according to the same oxide film using a power law is used. It is concluded that the time of irradiation, the heat flux at the surface of the aluminum material, the speed of the coolant, the thermal conductivity of the oxide, the initial thickness of the oxide layer and the solubility of the protective oxide are parameters affecting in the rate and film formation. (author).

  20. Study in vitro of dental enamel irradiated with a high power diode laser operating at 960 nm: morphological analysis of post-irradiation dental surface and thermal effect analysis in pulp chamber due to laser application

    International Nuclear Information System (INIS)

    Quinto Junior, Jose

    2001-01-01

    Objectives: This study examines the structural and thermal modifications induced in dental enamel under dye assisted diode laser irradiation. The aim of this study is to verify if this laser-assisted treatment is capable to modify the enamel surface by causing fusion of the enamel surface layer. At the same time, the pulpal temperature rise must be kept low enough in order not to cause pulpar necrosis. To achieve this target, it is necessary to determine suitable laser parameters. As is known, fusion of the enamel surface followed by re-solidification produce a more acid resistant layer. This surface treatment is being researched as a new method for caries prevention. Method and Materials: A series of fourteen identically prepared enamel samples of human teeth were irradiated with a high power diode laser operating at 960 nm and using fiber delivery. Prior to irradiation, a fine layer of cromophorous ink was applied to the enamel surface. In the first part of the experiment the best parameter for pulse duration was determined. In the second part of the experimental phase the same energy density was used but with different repetition rates. During irradiation we monitored the temperature rise in the pulpal cavity. The morphology of the treated samples was analysed under SEM. Results: The morphology of the treated samples showed a homogeneously re-solidified enamel layer. The results of the temperature analysis showed a decrease of the pulpal temperature rise with decreasing repetition rate. Conclusion: With the diode laser it is possible to cause morphological alterations of the enamel surface, which is known to increase the enamel resistance against acid attack, and still maintain the temperature rise in the pulpar chamber below damage threshold. (author)

  1. Does age modify the association between physical work demands and deterioration of self-rated general health?

    DEFF Research Database (Denmark)

    Burr, Hermann; Pohrt, Anne; Rugulies, Reiner

    2017-01-01

    Objective Due to the growing proportion of older employees in the work force in several countries, the importance of age in the association between work and health is becoming increasingly relevant. Few studies have investigated whether age modifies the association of physical work demands...... with health. We hypothesized that the association of demanding body postures with deteriorated self-rated health (SRH) is stronger among older employees than among younger employees. Method We analyzed three 5-year cohorts in the Danish Work Environment Cohort Study comprising 8318 observations from 5204...... employees (follow-up participation rate 83%) with good baseline SRH. Physical work demands were assessed as demanding body postures. Age was divided into tertiles; young (18–32 years), middle–aged (33–43 years) and old (44–59 among men and 44–54 years among women). Poor SRH ("fairly good", "poor", and "very...

  2. Does age modify the association between physical work demands and deterioration of self-rated general health?

    DEFF Research Database (Denmark)

    Burr, Hermann; Pohrt, Anne; Rugulies, Reiner

    2017-01-01

    poor") was measured with a single item. Log binomial regressions were stratified by gender. Effect modification (ie, interaction) was defined as deviation from additivity and examined by calculating the relative excess risk due to interaction (RERI). The reference group was employees aged 18–32 years...... with low physical exposure. Results: When predicting deterioration of SRH, an interaction between demanding body postures and age was found among men [RERI: 0.75, 95% confidence interval (95% CI) 0.16–1.34, regarding the age group 44–59 years] and among women (RERI: 0.84, 95% CI 0.19–1.34, for the age...... group 33–43 years; and 1.17, 95% CI 0.42–1.93, for the age group 44–54 years). Conclusion: The study findings suggest that demanding body postures have a stronger impact on health among older compared to younger employees....

  3. The Prediction of Deterioration of Nutritional Status during Chemoradiation Therapy in Patients with Esophageal Cancer.

    Science.gov (United States)

    Rietveld, Sofia C M; Witvliet-van Nierop, Jill E; Ottens-Oussoren, Karen; van der Peet, Donald L; de van der Schueren, Marian A E

    2018-01-01

    Patients with esophageal cancer are at high risk of developing malnutrition during neoadjuvant chemoradiation therapy (CRT), which in turn is associated with postoperative morbidity. The aim of the study is to explore whether parameters of a complete pre-treatment nutritional status may predict deterioration of nutritional status during CRT in patients with esophageal cancer. In this prospective cohort study, 101 patients with esophageal cancer treated with CRT were included. Data of patient characteristics, tumor classification, performance score, %weight change, body mass index, fat (free) mass index, phase angle, handgrip strength, energy- and protein intake, and use of (additional) dietary supplements were collected. A prediction model was constructed to identify predictive parameters for deterioration in nutritional status (defined as weight loss of >5% and/or decline in fat free mass of ≥1.4 kg) during CRT. Nutritional status deteriorated in 49 patients (49%) during CRT. The only predictor for deterioration in nutritional status was fat free mass index (OR 1.21 (90% CI: 1.03 - 1.42)). Patients with a higher fat free mass index are at increased risk of deterioration in nutrition status during CRT. Results suggest that all patients should be carefully supervised during CRT, regardless of their nutritional status before start of CRT.

  4. The application of a skid resistance deterioration model to various New Zealand aggregates

    OpenAIRE

    NATAADMADJA, Adelia; WILSON, Douglas; COSTELLO, Seosamh; DO, Minh Tan

    2015-01-01

    A number of studies have been undertaken to help predict infield long-term skid resistance performance. The Polished Stone Value (PSV) test is the oldest and the most common test used worldwide to rank the skid resistance performance of road surfaces. Due to certain limitations of the PSV test, other laboratory test methodologies have been developed as potential alternatives. One of the limitations of the PSV test is that it only provides end of test results, whereas it is desirable to observ...

  5. ESTIMATION OF SOYBEAN SEED (Glycine max L. Merr DETERIORATION DURING STORAGE

    Directory of Open Access Journals (Sweden)

    Irma Noviana

    2017-09-01

    Full Text Available ing the behavior and deterioration of soybean seed and to predict seed viability during storage in controlled conditions. The experiment used completely randomized design with two levels of variety which nested in storage period with four replications. Two varieties were Dering-1 and Detam 2 that storage in controlled condition at temperature of 19 up to 22 °C and 64 up to 67 percent of relative humidity for six months. The seeds were evaluated for moisture content, protein, peroxide value, electrical conductivity and seed viability. During the deterioration the moisture content, peroxide, electrical conductivity increased while protein content and germination declined. Deterioration model of soybeans can be used to predict the decline of soybean seeds during the controlled storage.

  6. Quantification of the Value of Structural Health Monitoring Information for Fatigue Deteriorating Structural Systems

    DEFF Research Database (Denmark)

    Thöns, Sebastian; Schneider, Ronald; Faber, Michael Havbro

    2015-01-01

    life cycle performance, the integrity management and the structural risks. The relevance and precision of SHM information for the reduction of the structural system risks and the expected cost of the structural integrity management throughout the life cycle constitutes the value of SHM......This paper addresses the quantification of the value of structural health monitoring (SHM) before its implementation for structural systems on the basis of its Value of Information (VoI). The value of SHM is calculated utilizing the Bayesian pre-posterior decision analysis modelling the structural...... and is quantified with this framework. The approach is focused on fatigue deteriorating structural steel systems for which a continuous resistance deterioration formulation is introduced. In a case study, the value of SHM for load monitoring is calculated for a Daniels system subjected to fatigue deterioration...

  7. The impact of in-hospital nutritional status deterioration on treatment outcome of adult gastroenterological patients.

    Science.gov (United States)

    Roganović, Branka; Perić, Saša; Janković, Snežana R

    2016-08-01

    In the current literature, data on impact of intrahospital changes in patients’ nutritional status on the treatment outcome are limited. The aim of this study was to investigate the relationship between nutritional status deterioration and the treatment outcome among hospitalized gastroenterological patients. In 650 adult gastroenterological patients nutritional status on admission and at discharge was evaluated using the 6 nutritional status assessment parameters: body mass index, triceps skinfold thickness, mid-upper arm muscle circumference, serum albumin concentration, lymphocyte count and unintentional weight loss. The influence on treatment outcome was tested for the nutritional status on admission, nutritional status at discharge and intrahospital nutritional status deterioration. The incidence of favorable outcome in the non-undernourished and undernourished patients on admission was in the range 93.4-97.3% and 81.2- 91.2%, respectively. The incidence of favorable outcome in the non-undernourished and undernourished patients at discharge was in the range 94-97.4% and 80.8-88.1%, respectively. Favorable outcomes were obtained in 95.6-98.9% of the patients without nutritional status deterioration and in 87.1-90.3% of the patients with nutritional status deterioration. Intrahospital nutritional status deterioration significantly influenced the outcome, no matter what assessment parameter had been used (p nutritional status was found to be an independent predictor of treatment outcome (multivariate analysis Forwald Wald, p £ 0.001; relative risk (RR) = 0.104-0.350; confidence intervals (CI) = 0.037-0.186/0.297-0.657). Deterioration of nutritional status is an independent predictor of adverse outcome.

  8. A Novel Approach to Limit Chemical Deterioration of Gilthead Sea Bream (Sparus aurata) Fillets: Coating with Electrospun Nanofibers as Characterized by Molecular, Thermal, and Microstructural Properties.

    Science.gov (United States)

    Ceylan, Zafer; Sengor, Gulgun F Unal; Yilmaz, Mustafa Tahsin

    2017-05-01

    Coating of sea bream fillets with thymol loaded chitosan based electrospun nanofibers (TLCN) and chitosan based nanafibers (CN) has been presented a novel approach to delay chemical deterioration. We assessed CN and TLCN with respect of scanting of total volatile basic nitrogen (TVBN), trimethylamine (TMA), thiobarbituric acid (TBA) deterioration during cold storage condition. Electrospinning process was applied to obtain TLCN and CN. Both of nanofibers obtained from biopolymer and bioactive material were cylindrical, smooth, beadless. Thermal, molecular, zeta potential (ZP), and surface properties of the groups were investigated, revealing that CN indicated molecular interactions with thymol in nanofibers, reduce in physical properties of these structures, thermal decomposition (an alteration in mass of CN and TLCN at temperatures below 190 °C, corresponding to 20.53% and 19.97%, respectively) and also dispersion stabilities (ζ potential) of CN and TLCN were determined 33.68 ± 3.35 and 21.85 ± 1.96 mV, respectively. TVBN and TMA stability analyses demonstrated that CN and TLCN were both effective in delaying chemical deterioration of fish fillets, furthermore TLCN was more effective against chemical deterioration. TBA analyses results of fish fillets indicated that CN and TLCN delayed rancidity in fish meat as compared to control group samples. The presented study results suggested that coating of the sea bream fillets with CN and TLCN would be a promising approach to delay the chemical deterioration of fish fillets. © 2017 Institute of Food Technologists®.

  9. Risk-based replacement strategies for redundant deteriorating reinforced concrete pipe networks

    International Nuclear Information System (INIS)

    Adey, B.; Bernard, O.; Gerard, B.

    2003-01-01

    This paper gives an example of how predictive models of the deterioration of reinforced concrete pipes and the consequences of failure can be used to develop risk-based replacement strategies for redundant reinforced concrete pipe networks. It also shows how an accurate deterioration prediction can lead to a reduction of agency costs, and illustrates the limitation of the incremental intervention step algorithm. The main conclusion is that the use of predictive models, such as those developed by Oxand S.A., in the determination of replacement strategies for redundant reinforced concrete pipe networks can lead to a significant reduction in overall costs for the owner of the structure. (author)

  10. Two warehouse inventory model for deteriorating item with exponential demand rate and permissible delay in payment

    Directory of Open Access Journals (Sweden)

    Kaliraman Naresh Kumar

    2017-01-01

    Full Text Available A two warehouse inventory model for deteriorating items is considered with exponential demand rate and permissible delay in payment. Shortage is not allowed and deterioration rate is constant. In the model, one warehouse is rented and the other is owned. The rented warehouse is provided with better facility for the stock than the owned warehouse, but is charged more. The objective of this model is to find the best replenishment policies for minimizing the total appropriate inventory cost. A numerical illustration and sensitivity analysis is provided.

  11. Mapping of Temporal Surface-water Resources Availability and Agricultural Adaptability due to Climate Change and Anthropogenic Activity in a Hot Semi-arid Region of Maharashtra State, India

    Science.gov (United States)

    Roy, A.; Inamdar, A. B.

    2016-12-01

    Major part of Godavari River Basin is intensely drought prone and climate vulnerable in the Western Maharashtra State, India. The economy of the state depends on the agronomic productivity of this region. So, it is necessary to regulate the effects of existing and upcoming hydro-meteorological advances in various strata. This study investigates and maps the surface water resources availability and vegetation, their decadal deviations with multi-temporal LANDSAT images; and finally quantifies the agricultural adaptations. This work involves the utilization of Remote Sensing and GIS with Hydrological modeling. First, climatic trend analysis is carried out with NCEP dataset. Then, multi-temporal LANDSAT images are classified to determine the decadal LULC changes and correlated to the community level hydrological demand. Finally, NDVI, NDWI and SWAT model analysis are accomplished to determine irrigated and non-irrigated cropping area for identifying the agricultural adaptations. The analysis shows that the mean value of annual and monsoon rainfall is significantly decreasing, whereas the mean value of annual and summer temperature is increasing significantly and the winter temperature is decreasing. The analysis of LANDSAT images shows that the surface water availability is highly dependent on climatic conditions. Barren-lands are most dynamic during the study period followed by, vegetation, and water bodies. The spatial extent of barren-lands is increased drastically during the climate vulnerable years replacing the vegetation and surface water bodies. Hence, the barren lands are constantly increasing and the vegetation cover is linearly decreasing, whereas the water extent is changing either way in a random fashion. There appears a positive correlation between surface water and vegetation occurrence; as they are fluctuating in a similar fashion in all the years. The vegetation cover is densely replenished around the dams and natural water bodies which serve as the

  12. Due process traditionalism.

    Science.gov (United States)

    Sunstein, Cass R

    2008-06-01

    In important cases, the Supreme Court has limited the scope of "substantive due process" by reference to tradition, but it has yet to explain why it has done so. Due process traditionalism might be defended in several distinctive ways. The most ambitious defense draws on a set of ideas associated with Edmund Burke and Friedrich Hayek, who suggested that traditions have special credentials by virtue of their acceptance by many minds. But this defense runs into three problems. Those who have participated in a tradition may not have accepted any relevant proposition; they might suffer from a systematic bias; and they might have joined a cascade. An alternative defense sees due process traditionalism as a second-best substitute for two preferable alternatives: a purely procedural approach to the Due Process Clause, and an approach that gives legislatures the benefit of every reasonable doubt. But it is not clear that in these domains, the first-best approaches are especially attractive; and even if they are, the second-best may be an unacceptably crude substitute. The most plausible defense of due process traditionalism operates on rule-consequentialist grounds, with the suggestion that even if traditions are not great, they are often good, and judges do best if they defer to traditions rather than attempting to specify the content of "liberty" on their own. But the rule-consequentialist defense depends on controversial and probably false assumptions about the likely goodness of traditions and the institutional incapacities of judges.

  13. An Experimental Study on the Deterioration of Paint Coatings in the Bilges of a Sea Vessel

    Directory of Open Access Journals (Sweden)

    Tanzila Younus

    2016-04-01

    Full Text Available Scantling and rolling tolerances have gradually improved. The durability of anticorrosive property of coatings is the critical factor in safeguarding the capital investment locked up in the structure of the vessel. Understanding of reduction in corrosion rate due to protective coatings and the breakdown point of the coatings is a vital part of safe vessel operation. In this paper, surface morphology of paint scheme used in bilges water, is measured by using both optical and AFM (Atomic Force Microscope to prevent corrosion. Both the strategies are utilized to study natural practices of diverse coatings in addition to the impact of their film development and shades. The results demonstrate that undercoat epoxy utilized within bilges water has great resistance towards corrosion in bilges water immersion test. Surface attributes of distinctive layers are noticeably unique in relation to one another in surface morphology. Mild steel coated with epoxy under coat shows better surface characteristics whereas film of primer epoxy coat has many pits as observed by percentage surface imaging of the current bilges paint scheme.

  14. Deterioration of western redcedar (Thuja plicata Donn ex D. Don) seeds: protein oxidation and in vivo NMR monitoring of storage oils.

    Science.gov (United States)

    Terskikh, Victor V; Zeng, Ying; Feurtado, J Allan; Giblin, Michael; Abrams, Suzanne R; Kermode, Allison R

    2008-01-01

    Deterioration of conifer seeds during prolonged storage has a negative impact on reforestation and gene conservation efforts. Western redcedar (Thuja plicata Donn ex D. Don) is a species of tremendous value to the forest industry. The seeds of this species are particularly prone to viability losses during long-term storage. Reliable tools to assess losses in seed viability during storage and their underlying causes, as well as the development of methods to prevent storage-related deterioration of seeds are needed by the forest industry. In this work, various imaging methods and biochemical analyses were applied to study deterioration of western redcedar seeds. Seedlots that exhibited poor germination performance, i.e. those that had experienced the greatest losses of viability during prolonged storage, exhibited greater abundance of oxidized proteins, detected by protein oxidation assays, and more pronounced changes in their in vivo (13)C NMR spectra, most likely due to storage oil oxidation. The proportion of oxidized proteins also increased when seeds were subjected to accelerated ageing treatments. Detection of oxidized oils and proteins may constitute a reliable and useful tool for the forest industry.

  15. Rapid degradation of the complex organic molecules in Martian surface rocks due to exposure to cosmic rays. Implications to the search of 'extinct' life on Mars by MSL and ExoMars

    Science.gov (United States)

    Pavlov, A.; Eigenbrode, J. L.; Glavin, D. P.; Floyd, M.; Mahaffy, P. R.

    2013-12-01

    Until recently, long-term exposure to cosmic rays has not been recognized as a major environmental factor, which can alter and destroy organic molecules in the Martian surface rocks. Recent modeling studies (e.g. Pavlov et al., 2012) suggested that organic molecules with masses >100 amu would be degraded in less than 1 billion years in the top 5 cm of the Martian rocks. That poses a serious challenge to the search of ancient molecules in the shallow subsurface of Mars. However, Pavlov et al. calculated the fraction of the survived organic molecules using conservative radiolysis constants derived from the gamma irradiation experiments on pure dry amino acid mixtures (Kminek and Bada, 2006). In this study we conducted a series of gamma irradiations of amino acids and carboxylic acids mixed with silica powder. We report that the addition of silicates dramatically increased the rate of organic degradation under gamma radiation. Using the newly derived radiolysis constants for amino acids and carboxylic acids in mineral mixtures, we recalculated the rate of organic degradation in the Martian rocks as a function of rocks' depth, chemical composition and weathering rates. Our results suggest that isolated organic molecules (acids) are likely to be altered or fully degraded in the surface rocks on Mars by cosmic rays in less than 10 million years unless some additional protective mechanisms are in place. We will discuss possible strategies for the MSL's search of the elusive ancient organic molecules to overcome the adverse effects of cosmic rays in the surface Martian rocks. References. Pavlov et al., 2012 GEOPHYSICAL RESEARCH LETTERS, doi:10.1029/2012GL052166 Kminek, G., and J. Bada (2006), Earth Planet. Sci. Lett., 245, 1-5, doi:10.1016/j.epsl.2006.03.008.

  16. Integral analysis of cavity pressurization in a fuel rod during an ULOF driven TOP with inclusion of surface tension effects on froth gas bubbles and variable cavity conditions due to fuel melting and ejection

    International Nuclear Information System (INIS)

    Royl, P.

    1984-02-01

    The transient cavity pressurization in an ULOF driven TOP excursion has been analyzed for the SPX-1 reactor with an equation of state that allows to simulate the contribution of small froth gas bubbles to the pressure build-up in a fuel pin with inclusion of restraints from surface tension. Calculations were performed for various bubble parameters. Estimates are made for effective gas availabilities at fuel melting which can be used in a cavity model with an ideal gas equation to arrive at similar pressure transients

  17. [A Case of Ruptured Anterior Communicating Artery Aneurysm with Visual Field Defects and Deteriorating to Severe Vision Loss].

    Science.gov (United States)

    Sakakura, Kazuki; Ikeda, Go; Nakai, Yasunobu; Watanabe, Noriyuki; Shiigai, Masanari; Uemura, Kazuya; Yamamoto, Tetsuya; Matsumura, Akira

    2017-10-01

    Although Terson's syndrome is a well-known cause of vision loss due to intracerebral aneurysm rupture, optic nerve neuropathy can also occur because of other causes. Here, we report such a case, i.e., a ruptured anterior communicating artery aneurysm accompanied by vision loss and visual field disturbances due to a cause other than Terson's syndrome. A 47-year-old man presented with right superior altitudinal hemianopia. Computed tomography (CT) showed subarachnoid hemorrhage (SAH), and three-dimensional CT angiography revealed an anterior communicating artery aneurysm. Coil embolization was performed. Right visual acuity degenerated to blindness in the acute stage. MRI performed on day 7 post-admission revealed that the aneurysm had swollen and made contact with the right optic disk. On the basis of the patient's clinical course, we believe that the deterioration in his visual acuity could have been due to ischemic optic neuropathy (ION) resulting from SAH, and the subsequent edema and poor blood perfusion may be attributed to spasm. In cases of visual disturbance associated with SAH, as in our case, it is important to perform MRI to evaluate the damage or risk to the optic nerve as soon as possible. (Received December 26, 2016; Accepted June 9, 2017; Published October 1, 2017).

  18. Paradoxical Deterioration During Anti-Tuberculous Therapy in Non-HIV-Infected Patients with Pleural Tuberculosis: A Pragmatic Approach

    Directory of Open Access Journals (Sweden)

    Luis Corral-Gudino

    2016-09-01

    Full Text Available We report a case of paradoxical deterioration. A male patient diagnosed with pleural tuberculosis, but who was not infected with human immunodeficiency virus (HIV, experienced clinical deterioration 3 weeks after the initiation of anti-tuberculous treatment. After other diagnoses were ruled out, a paradoxical response to treatment was established and the patient was started on systemic corticosteroids. Paradoxical response to treatment should be considered in patients with clinical deterioration after they start on anti-tuberculous treatment.

  19. Molecular markers reliably predict post-harvest deterioration of fresh-cut lettuce in modified atmosphere packaging.

    Science.gov (United States)

    Simko, Ivan; Hayes, Ryan J; Truco, Maria-Jose; Michelmore, Richard W; Antonise, Rudie; Massoudi, Mark

    2018-01-01

    Fresh-cut lettuce is popular, but highly perishable product. Genetic studies of two bi-parental populations derived from crossing parents with rapid and slow rates of deterioration showed that the deterioration rate is a heritable trait (broad spectrum heritability, H 2 of 0.56-0.87). The major genetic determinant of the deterioration rate in both populations was the quantitative trait locus (QTL), qSL4 , located on linkage group 4. This QTL explained 40-74% of the total phenotypic variation of the trait in the two populations. Saturating the qSL4 region with single-nucleotide (SNP) markers allowed detection of six haplotypes in a set of 16 lettuce accessions with different rates of deterioration. Three of the haplotypes were always associated with very rapid rates of deterioration, while the other three haplotypes were associated with slow rates of deterioration. Two SNPs located 53 bp apart were sufficient to separate the 16 accessions into two groups with different rates of deterioration. The accuracy of markers-trait association was subsequently tested on 350 plants from seven F 2 families that originated from crossing parents with different rates of deterioration. The H 2 of deterioration rate in these seven families ranged from 0.64 to 0.90. The SNP-based analysis accurately identified individuals with rapid, intermediate, and slow rates of deterioration in each family. Intermediate rate of deterioration was found in individuals having heterozygous alleles at qSL4 , indicating an additive effect of the alleles. The assay can be used for fast, accurate, and reliable identification of deterioration rate after processing for salad.

  20. Conversion to sirolimus from cyclosporine may induce nephrotic proteinuria and progressive deterioration of renal function in chronic allograft nephropathy patients.

    Science.gov (United States)

    Boratyńska, M; Banasik, M; Watorek, E; Falkiewicz, K; Patrzałek, D; Szyber, P; Klinger, M

    2006-01-01

    Antiproliferative and non-nephrotoxic properties of sirolimus have been exploited for treatment of patients with chronic graft dysfunction. In this paper we point to the possible association of nephrotic syndrome and renal impairment with rapid conversion from cyclosporine (CsA) to sirolimus in patients with chronic nephropathy. Five male patients, ages 34 to 56 years, with chronic renal failure in the course of glomerulonephritis, were transplanted between 1997 and 1999. For the first 49 to 65 months, the immunosuppressive regimen consisted of CsA, azathioprine (AZA), and prednisone. Thereafter, due to chronic nephropathy evidenced by biopsy, conversion to sirolimus was performed with sharp withdrawal of CsA. The serum creatinine level prior to conversion was 1.9 +/- 0.3 mg/dL. Trace to 86 mg/dL proteinuria was found in 3 patients, while 2 patients had about 200 mg/dL. After 2 to 4 months of sirolimus treatment the proteinuria progressed (558 +/- 183 mg/dL); edema, hypoproteinemia, hypoalbuminemia, and hyperlipidemia developed; and the serum creatinine increased to 3.5 +/- 0.8 mg/dL. Biopsies performed in three patients revealed new pathologic changes. After 4 to 5 months, we performed reconversion to calcineurin inhibitor. Proteinuria decreased to 0 to 150 mg/dL; nevertheless the serum creatinine was continuously rising. Six to 15 months after the conversion, 3 patients returned to dialysis. The fourth patient, who was earlier reconverted, has a serum creatinine level of 2.0 mg/dL after 15 months. In conclusion, conversion from CsA to sirolimus may induce nephrotic syndrome with progressive deterioration of renal function. Converted patients require careful monitoring of proteinuria and renal function. Early reconversion to calcineurin inhibitor may prevent progressive deterioration of graft function.