WorldWideScience

Sample records for surf zone bed

  1. SWASH ZONE BED LEVEL CHANGES AND SEDIMENT ENTRAINMENT AT THE SURF-SWASH BOUNDARY

    DEFF Research Database (Denmark)

    Jensen, Stine Gro; Aagaard, Troels; Baldock, Tom

    2010-01-01

    detailed data on water levels and bed elevations in the swash zone. Water levels derived from the pressure transducers show that swash zone characteristics vary from the upper to lower swash. Using pressure transducers in the swash zone coupled with measurements of the hydrodynamics and sediment...

  2. Observations of wave-induced pore pressure gradients and bed level response on a surf zone sandbar

    Science.gov (United States)

    Anderson, Dylan; Cox, Dan; Mieras, Ryan; Puleo, Jack A.; Hsu, Tian-Jian

    2017-06-01

    Horizontal and vertical pressure gradients may be important physical mechanisms contributing to onshore sediment transport beneath steep, near-breaking waves in the surf zone. A barred beach was constructed in a large-scale laboratory wave flume with a fixed profile containing a mobile sediment layer on the crest of the sandbar. Horizontal and vertical pore pressure gradients were obtained by finite differences of measurements from an array of pressure transducers buried within the upper several centimeters of the bed. Colocated observations of erosion depth were made during asymmetric wave trials with wave heights between 0.10 and 0.98 m, consistently resulting in onshore sheet flow sediment transport. The pore pressure gradient vector within the bed exhibited temporal rotations during each wave cycle, directed predominantly upward under the trough and then rapidly rotating onshore and downward as the wavefront passed. The magnitude of the pore pressure gradient during each phase of rotation was correlated with local wave steepness and relative depth. Momentary bed failures as deep as 20 grain diameters were coincident with sharp increases in the onshore-directed pore pressure gradients, but occurred at horizontal pressure gradients less than theoretical critical values for initiation of the motion for compact beds. An expression combining the effects of both horizontal and vertical pore pressure gradients with bed shear stress and soil stability is used to determine that failure of the bed is initiated at nonnegligible values of both forces.Plain Language SummaryThe pressure gradient present within the seabed beneath breaking waves may be an important physical mechanism transporting sediment. A large-scale laboratory was used to replicate realistic surfzone conditions in controlled tests, allowing for horizontal and vertical pressure gradient magnitudes and the resulting sediment bed response to be observed with precise instruments. Contrary to previous studies

  3. Multispectral observations of the surf zone

    Science.gov (United States)

    Schoonmaker, Jon S.; Dirbas, Joseph; Gilbert, Gary

    2003-09-01

    Airborne multispectral imagery was collected over various targets on the beach and in the water in an attempt to characterize the surf zone environment with respect to electro-optical system capabilities and to assess the utility of very low cost, small multispectral systems in mine counter measures (MCM) and intelligence, surveillance and reconnaissance applications. The data was collected by PAR Government Systems Corporation (PGSC) at the Army Corps of Engineers Field Research Facility at Duck North Carolina and on the beaches of Camp Pendleton Marine Corps Base in Southern California. PGSC flew the first two of its MANTIS (Mission Adaptable Narrowband Tunable Imaging Sensor) systems. Both MANTIS systems were flown in an IR - red - green - blue (700, 600, 550, 480 nm) configuration from altitudes ranging from 200 to 700 meters. Data collected has been lightly analyzed and a surf zone index (SZI) defined and calculated. This index allows mine hunting system performance measurements in the surf zone to be normalized by environmental conditions. The SZI takes into account water clarity, wave energy, and foam persistence.

  4. Modeling and Simulation for a Surf Zone Robot

    Science.gov (United States)

    2012-12-14

    on a surf zone vehicle focused on negative buoyancy using tracked platforms that used traditional tank drive mechanisms to remain on the sea floor...through the surf zone transit and drive on to the beach. Provided by the Surf Zone Crawler Group of Naval Surface Warfare Center Panama City, a Foster...with the traction and obstacle scaling of a leg [2]. Further work elaborated this concept into an entire drivetrain concept. Focused on the

  5. Lidar and aerosol measurements over the surf zone

    NARCIS (Netherlands)

    Moerman, M.M.; Cohen, L.H.; Leeuw, G. de; Kunz, G.J.

    2001-01-01

    The aerosol produced by waves breaking in the surf zone is important for a variety of processes, such as transport of pollutants and bacteria, and electro optical propagation in the coastal zone. Yet, quantitative information on surf produced aerosol is very limited (de Leeuw et al., 2000). In the f

  6. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF:Large-scale Sediment Transport Facility). Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment sus- pension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  7. Sea spray aerosol and wave energy dissipation in the surf zone

    NARCIS (Netherlands)

    Francius, M.J.; Piazzola, J.; Forget, P.; Calve, O. le; Kusmierczyk-Michulec, J.

    2007-01-01

    Results from a quantitative model for the prediction of the sea-salt mass flux produced in the surf zone are presented in this paper. The model relates the surf zone sea salt mass flux to the amount of wave energy dissipated in the surf zone. In order to apply this aerosol emission model, a wave num

  8. Sea-spray aerosol particles generated in the surf zone

    NARCIS (Netherlands)

    Eijk, A.M.J. van; Kusmierczyk‐Michulec, J.T.; Francius, M.J.; Tedeschi, G.; Piazzola,J.; Merritt, D.L.; Fontana, J.D.

    2011-01-01

    To assess the properties of aerosol particles generated over the surf zone, two experiments were held at the pier of Scripps Institution of Oceanography (SIO), La Jolla CA, and at the pier of the U.S. Army Corps of Engineers Field Research Facility (FRF) in Duck NC. On both sites concentrations of s

  9. Observations of turbulence within a natural surf zone

    NARCIS (Netherlands)

    Ruessink, B.G.

    2010-01-01

    Here, the Reynolds stresses and , where u′, v′, and w′ are the cross-shore, alongshore, and vertical turbulence velocities, respectively, and the angle brackets represent time averaging, are used to diagnose turbulence dynamics beneath natural breaking surf-zone waves. The data were col

  10. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-10-01

    Full Text Available Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF: Large-scale Sediment Transport Facility. Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment suspension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  11. Surf zone Exchange on a Rip Channeled Beach

    Science.gov (United States)

    Reniers, A.; Macmahan, J.

    2008-12-01

    The dispersion and surf zone exchange of GPS-equipped surface drifters observed during the Rip Current EXperiment (RCEX) is examined with help of Lagrangian Coherent Structures (LCSs). LCSs allow for the detection of transport barriers in unsteady flows and are typically applied to shelf-scale circulation systems. Here LCSs are specifically computed to detect the effects of surfzone-originated Very Low Frequency motions (VLFs) with O(10) minute time scale on the cross-shore exchange of floating material using numerical model calculations of the Lagrangian surface velocity at the wave group timescale. After verification with RCEX field observations, the model is run for a range of environmental conditions experienced during the field experiment to assess the effects of VLFs on the cross-shore surf zone exchange. Results are relevant for (but not restricted to) sediment and nutrient exchange, human health, water clarity, and swimmer safety.

  12. Surf-zone Underwater Robotic Demonstration Platform

    Science.gov (United States)

    2014-01-01

    dynamically advantageous shape for a robotic system. To address locomotive factors ARA completed a research and technical study based on an Archimedes ...effective hull shape. To study mobility and traction a propulsion system based on an Archimedes screw drive was used. A drive design based on an... Archimedes screw was chosen because of its ability to operate in various mediums with varying flow rates. A test bed was designed and assembled in order to

  13. Occurrence of larval fishes in the surf zone of a northern Gulf of Mexico barrier island

    Science.gov (United States)

    Ruple, David L.

    1984-02-01

    Larval fishes were collected from the surf zone of Horn Island, Mississippi between March 1978 and April 1979. A standardized total of 39 435 larvae were taken from 222 collections in the inner and outer surf zone regions, representing fish in 69 taxa. Overall, considerably more larvae were collected in the outer surf zone (78·3%) than in the inner surf zone (21·7%). Engraulids, Chloroscombrus chrysurus and Symphurus spp. were the most abundant larvae taken from the outer surf zone while engraulids, Leiostomus xanthurus, Brevoortia patronus and Trinectes maculatus were the numerically dominant larvae in the inner surf zone. Seasonal peaks in abundance occurred at the outer surf zone stations during May and June and at the inner surf zone stations during December. Larval densities were significantly greater in night collections than in day collections. The occurrence of early larvae, late larvae and juveniles suggests that the surf zone habitat is important to several species of coastal marine fishes. Menticirrhus littoralis, Harengula jaguana and Trachinotus carolinus appear to most readily utilize the surf zone as a nursery area.

  14. The Vertical Structure of Shallow Water Flow in the Surf Zone and Inner Shelf

    Science.gov (United States)

    2008-01-01

    E. Richardson, 2008, Field verification of a CFD model for wave transformation and breaking in the surf zone, J. Waterw. Port Coastal Engrg., 134(2...The Vertical Structure of Shallow Water Flow in the Surf Zone and Inner Shelf Dr. Thomas C. Lippmann Center for Coastal...wave- and tidally-driven shallow water flows in the shallow depths of the inner shelf and surf zone. OBJECTIVES 1. Theoretical investigations of

  15. Cross-shore currents in the surf zone

    DEFF Research Database (Denmark)

    Aagaard, Troels; Vinther, Niels

    2008-01-01

      While the dynamics and kinematics of various types of mean cross-shore current flows in the surf zone (undertow and rip currents) are fairly well understood, the causes for transitions occurring between these two types of mean circulation patterns remain obscure. On longshore barred beaches......, such transitions involve the formation and/or degeneration of rip channels. In this paper, field evidence is presented to suggest that transitions between undertow and rip current (cell) circulations may depend upon the magnitude of the wave-induced onshore mass transport across a longshore bar, rip channel...... that both hydrodynamic conditions and existing bathymetry are critical in determining the type of mean current circulation....

  16. Bedforms and undertow in the surf zone; an analysis of the LIP 11D-data

    NARCIS (Netherlands)

    Boers, M.

    1995-01-01

    The present report gives the results of a study on bedforms and undertow in the surf zone. It is the objective of this study to get a better insight into the physical processes in the surf zone. In this study, we make use of the data obtained during the LIP llDexperiments (Arcilla et al. [1994] and

  17. Transport of larvae and detritus across the surf zone of a steep reflective pocket beach

    NARCIS (Netherlands)

    Shanks, A.L.; MacMahan, J.; Morgan, S.G.; Reniers, A.J.H.M.; Jarvis, M.; Brown, J.; Fujimura, A.; Griesemer, C.

    2015-01-01

    Larvae of many intertidal species develop offshore and must cross the surf zone to complete their onshore migration to adult habitats. Depending on hydrodynamics, the surf zone may limit this migration, especially on reflective rocky shores. As a logistically tractable analog of a rocky shore enviro

  18. Transport of larvae and detritus across the surf zone of a steep reflective pocket beach

    NARCIS (Netherlands)

    Shanks, A.L.; MacMahan, J.; Morgan, S.G.; Reniers, A.J.H.M.; Jarvis, M.; Brown, J.; Fujimura, A.; Griesemer, C.

    2015-01-01

    Larvae of many intertidal species develop offshore and must cross the surf zone to complete their onshore migration to adult habitats. Depending on hydrodynamics, the surf zone may limit this migration, especially on reflective rocky shores. As a logistically tractable analog of a rocky shore

  19. Sea spray aerosol production from waves breaking in the surf zone

    NARCIS (Netherlands)

    Leeuw, G. de

    1999-01-01

    Sea spray aerosol is a product of wave breaking. A very strong source of this aerosol is the surf zone. In this sense, measurements in the surf zone can be suitable for the assessment of the contributions of the various spray production mechanisms to the total concentrations. At present, a comprehen

  20. Modelling of sediment movement in the surf and swash zones

    Institute of Scientific and Technical Information of China (English)

    TOKPOHOZIN N B; KOUNOUHEWA B; AVOSSEVOU G Y H; HOUEKPOHEHAM A; AWANOU C N

    2015-01-01

    Under the action of marine currents, non-cohesive sediments evolve by bed-load, by saltation or suspension depending on their granulometry. Several authors have considered that the movement of sediment is bidimensional and modelized the effects of swell by a constant velocitynear the seabed. Here we have studied the velocity profile of fluctuating currents near the seabed and studied the movement of sediment in 3D. The results show that in the areas of study (surf and swash) the movement of sediment occurs in a volume, and the evolution of sediment varies from an areato another. The obtained theoretical profiles of the position and velocity vectors confirm the observations of several authors.

  1. Influence of the Surf Zone on the Marine Aerosol Concentration in a Coastal Area

    Science.gov (United States)

    Tedeschi, Gilles; van Eijk, Alexander M. J.; Piazzola, Jacques; Kusmierczyk-Michulec, Jolanta T.

    2017-01-01

    Sea-salt aerosol concentrations in the coastal zone are assessed with the numerical aerosol-transport model MACMod that applies separate aerosol source functions for open ocean and the surf zone near the sea-land transition. Numerical simulations of the aerosol concentration as a function of offshore distance from the surf zone compare favourably with experimental data obtained during a surf-zone aerosol experiment in Duck, North Carolina in autumn 2007. Based on numerical simulations, the effect of variations in aerosol production (source strength) and transport conditions (wind speed, air-sea temperature difference), we show that the surf-zone aerosols are replaced by aerosols generated over the open ocean as the airmass advects out to sea. The contribution from the surf-generated aerosol is significant during high wind speeds and high wave events, and is significant up to 30 km away from the production zone. At low wind speeds, the oceanic component dominates, except within 1-5 km of the surf zone. Similar results are obtained for onshore flow, where no further sea-salt aerosol production occurs as the airmass advects out over land. The oceanic aerosols that are well-mixed throughout the boundary layer are then more efficiently transported inland than are the surf-generated aerosols, which are confined to the first few tens of metres above the surface, and are therefore also more susceptible to the type of surface (trees or grass) that determines the deposition velocity.

  2. Analytical Derivation of Three Dimensional Vorticity Function for wave breaking in Surf Zone

    CERN Document Server

    Dutta, R

    2015-01-01

    In this report, Mathematical model for generalized nonlinear three dimensional wave breaking equations was de- veloped analytically using fully nonlinear extended Boussinesq equations to encompass rotational dynamics in wave breaking zone. The three dimensional equations for vorticity distributions are developed from Reynold based stress equations. Vorticity transport equations are also developed for wave breaking zone. This equations are basic model tools for numerical simulation of surf zone to explain wave breaking phenomena. The model reproduces most of the dynamics in the surf zone. Non linearity for wave height predictions is also shown close to the breaking both in shoaling as well as surf zone. Keyword Wave breaking, Boussinesq equation, shallow water, surf zone. PACS : 47.32-y

  3. Large Eddy Simulation for Wave Breaking in the Surf Zone

    Institute of Scientific and Technical Information of China (English)

    白玉川; 蒋昌波; 沈焕庭

    2001-01-01

    In this paper, the large eddy simulation method is used combined with the marker and cell method to study the wave propagation or shoaling and breaking process. As wave propagates into shallow water, the shoaling leads to the increase of wave height, and then at a certain position, the wave will be breaking. The breaking wave is a powerful agent for generating turbulence, which plays an important role in most of the fluid dynamic processes throughout the sarf zone, such as transformation of wave energy, generation of near-shore current and diffusion of materials. So a proper numerical model for describing the turbulence effect is needed. In this paper, a revised Smagorinsky subgrid-scale model is used to describe the turbulence effect. The present study reveals that the coefficient of the Smagorinsky model for wave propagation or breaking simulation may be taken as a varying function of the water depth and distance away from the wave breaking point. The large eddy simulation model presented in this paper has been used to study the propagation of the solitary wave in constant water depth and the shoaling of the non-breaking solitary wave on a beach. The model is based on large eddy simulation, and to track free-surface movements, the Tokyo University Modified Marker and Cell (TUMMAC) method is employed. In order to ensure the accuracy of each component of this wave mathematical model,several steps have been taken to verify calculated solutions with either analytical solutions or experimental data. For non-breaking waves, very accurate results are obtained for a solitary wave propagating over a constant depth and on a beach. Application of the model to cnoidal wave breaking in the surf zone shows that the model results are in good agreement with analytical solution and experimental data. From the present model results, it can be seen that the turbulent eddy viscosity increases from the bottom to the water surface in surf zone. In the eddy viscosity curve, there is a

  4. Inner Surf/Swash Zone Morphodynamic Numerical Model Simulation of an Accreting Ridge during Low-Energy Wave Conditions

    Science.gov (United States)

    Song, Youn Kyung; Figlus, Jens; Chardón-Maldonado, Patricia; Puleo, Jack A.

    2017-04-01

    The inner surf/swash zone of a coastal beach is characterized as an intermittently wet and dry zone in the nearshore that often develops a variety of morphological features including intertidal bars and ridge-runnel (RR) systems. The cross-shore morphodynamic numerical model CSHORE is used to simulate the beach recovery observed during a field experiment carried out at South Bethany Beach, Delaware, a nourished, high-gradient meso-tidal sandy beach along the U. S. Coast. The field campaign was conducted from February 12 to February 25, 2014 to measure bed profile morphology change and sediment characteristics along with detailed hydrodynamic forcing parameters at six cross-shore stations, closely spaced over approximately 50 m in the inner surf and swash zone. On February 13, 2014 a Nor'easter eroded significant portions of the beach leading to formation of a pronounced RR system on the beach face that subsequently accreted in the recovery process after the storm. Bed profile changes, surf and swash velocity profiles, water free surface elevation and suspended sediment concentrations recorded during the recovery at the cross-shore measuring locations on the seaward face of the accreting ridge are compared with CSHORE simulation results. During post-storm recovery, CSHORE demonstrates shoreward migration of the ridge and slight accretion on the beach face by the end of the simulation period on February 25, 2014. This trend was also observed in the field, where accretion at the ridge crest was up to 1.0 m with respect to the post-storm profile. The CSHORE parameters critical to improving model performance in reproducing measured morphodynamics and hydrodynamics during the ridge accretion process are examined and calibrated. Initial results show promise in using this type of efficient, process-based model to reproduce morphological evolution and depth-averaged hydrodynamics as a result of the complex surf and swash zone dynamics associated with beach accretion and RR

  5. The Relationship Between Shoreline Change and Surf Zone Sand Thickness

    Science.gov (United States)

    Miselis, J. L.; McNinch, J. E.

    2002-12-01

    There is a lack of information concerning surf zone geologic processes and their relationship to shoreline behavior despite the consensus that the two are intimately linked. Variations in sand thickness over a highly irregular migration surface close to the shoreline may influence wave dynamics and sediment transport and thus may be connected to hotspot formation. A nearshore survey, spanning 40km from north of the USACE-FRF pier in Duck, NC to just north of Oregon Inlet, was conducted using an interferometric swath bathymetry system and a chirp sub-bottom profiler. The study was conducted within 1km of the shore (in the surf zone) to investigate the processes that may be responsible for the behavior of shoreline hotspots in the area. The topmost reflector and the seafloor of the seismic profile were digitized and the depth difference between them was calculated. Though no ground truths were done in the survey area, cores collected from just north of the site suggest that the topmost reflector is a pre-modern ravinement surface (cohesive muds with layers of sand and gravel) upon which the Holocene sands migrate. An isopach map was generated and shows that the layer of sand above the first sub-bottom reflector is very thin and in some places, exposed. There are many variables that may influence hotspot behavior, including bar position and wave conditions, however, the purpose of this study is to determine if there is a spatial correlation between a thin or absent (exposed reflector) nearshore sand layer and the presence of a shoreline hotspot. In an area associated with a hotspot approximately 14km south of the USACE-FRF pier in Duck, the maximum thickness of Holocene sands was less than 2.5m. The average thickness was less than 1m (0.705m). Thicknesses that were less than 0.2m were classified as areas where the reflector was exposed and accounted for 5 percent of those calculated. It seems the thin layer of sand may represent a deficient nearshore sand source

  6. Sandy beach surf zones: An alternative nursery habitat for 0-age Chinook salmon

    Science.gov (United States)

    Marin Jarrin, J. R.; Miller, J. A.

    2013-12-01

    The role of each habitat fish use is of great importance to the dynamics of populations. During their early marine residence, Chinook salmon (Oncorhynchus tshawytscha), an anadromous fish species, mostly inhabit estuaries but also use sandy beach surf zones and the coastal ocean. However, the role of surf zones in the early life history of Chinook salmon is unclear. We hypothesized that surf zones serve as an alternative nursery habitat, defined as a habitat that consistently provides a proportion of a population with foraging and growth rates similar to those experienced in the primary nursery. First, we confirmed that juvenile Chinook salmon cohorts are simultaneously using both habitats by combining field collections with otolith chemical and structural analysis to directly compare size and migration patterns of juveniles collected in two Oregon (USA) estuaries and surf zones during three years. We then compared juvenile catch, diet and growth in estuaries and surf zones. Juveniles were consistently caught in both habitats throughout summer. Catches were significantly higher in estuaries (average ± SD = 34.3 ± 19.7 ind. 100 m-2) than surf zones (1.0 ± 1.5 ind. 100 m-2) and were positively correlated (r = 0.92). Size at capture (103 ± 15 mm fork length, FL), size at marine entry (76 ± 13 mm FL), stomach fullness (2 ± 2% body weight) and growth rates (0.4 ± 0.0 mm day-1) were similar between habitats. Our results suggest that when large numbers of 0-age Chinook salmon inhabit estuaries, juveniles concurrently use surf zones, which serve as an alternative nursery habitat. Therefore, surf zones expand the available rearing habitat for Chinook salmon during early marine residence, a critical period in the life history.

  7. Surf zone diatoms: A review of the drivers, patterns and role in sandy beaches food chains

    Science.gov (United States)

    Odebrecht, Clarisse; Du Preez, Derek R.; Abreu, Paulo Cesar; Campbell, Eileen E.

    2014-10-01

    The accumulation of high biomass of diatoms in the surf zone is a characteristic feature of some sandy beaches where the wave energy is sufficiently high. A few species of diatoms, called surf diatoms, thrive in this harsh environment. The main processes driving the spatial and temporal distribution of surf diatoms as well as their standing biomass and growth were described twenty to thirty years ago based on studies conducted on the western coast of the United States of America and South African beaches. Since then, over fifty locations around the world have been reported to have surf diatom accumulations with most (three-quarters) of these being in the southern hemisphere. Their occurrence is controlled by physical and chemical factors, including wave energy, beach slope and length, water circulation patterns in the surf zone and the availability of nutrients to sustain the high biomass. The main forces driving the patterns of temporal variability of surf diatom accumulations are meteorological. In the short term (hours), the action of wind stress and wave energy controls the diatom accumulation. In the intermediate time scale (weeks to months), seasonal onshore winds of sufficient strength, as well as storm events are important. Furthermore, anthropogenic disturbances that influence the beach ecosystem as well as large-scale events, such as the El Niño Southern Oscillation, may lead to significant changes in surf diatom populations in the long term (inter-annual). Surf diatoms form the base of a short and very productive food chain in the inshore of the sandy beaches where they occur. However, the role of surf diatoms in the microbial food web is not clear and deserves further studies.

  8. Numerical modeling of surf zone dynamics under weakly plunging breakers with SPH method

    Science.gov (United States)

    Makris, Christos V.; Memos, Constantine D.; Krestenitis, Yannis N.

    2016-02-01

    The wave breaking of weak plungers over a relatively mild slope is investigated in this paper. Numerical modeling aspects are studied, concerning the propagation and breaking of shore-normal, nonlinear and regular waves. The two-dimensional (2-D) kinematics and dynamics (fluctuating flow features and large 2-D eddies) of the wave-induced flow on a vertical cross-section over the entire surf zone are simulated with the use of Smoothed Particle Hydrodynamics (SPH). The academic 'open source' code SPHysics v.2 is employed and the viscosity treatment is based on a Sub-Particle Scale (SPS) approach, similarly to the Large Eddy Simulations (LES) concept. Thorough analysis of the turbulent flow scales determines the necessary refinement of the spatial resolution. The initial particle discretization reaches down to the demarcation point between integral turbulence length scales and Taylor micro-scales. A convolution-type integration method is implemented for the transformation of scattered Lagrangian particle data to Eulerian values at fixed gauges. A heuristic technique of ensemble-averaging is used for the discrimination of the fluctuating flow components from coherent structures and ordered wave motion. Comparisons between numerical and experimental data give encouraging results for several wave features. The wave-induced mean flows are simulated plausibly, and even the 'streaming' effect near the bed is reproduced. The recurring vorticity patterns are derived, and coherent 2-D structures inside the surf zone are identified. Fourier spectral analysis of velocities reveals isotropy of 2-D fluctuating dynamics up to rather high frequencies in shear intensified regions. The simulated Reynolds stresses follow patterns that define the characteristic mechanism of wave breaking for weak plungers. Persisting discrepancies at the incipient breaking region confirm the need for fine, massively 'parallel' 3-D SPS-SPH simulations.

  9. Factors affecting surf zone phytoplankton production in Southeastern North Carolina, USA

    KAUST Repository

    Cahoon, Lawrence B.

    2017-07-15

    Abstract: The biomass and productivity of primary producers in the surf zone of the ocean beach at Wrightsville Beach, North Carolina, USA, were measured during all seasons, along with environmental parameters and nutrient levels. Variation in biomass (chlorophyll a) was associated with temperature. Primary production (PP), measured by in situ 14-C incubations, was a function of chlorophyll a, tide height at the start of incubations, and rainfall in the preceding 24-hr period. Biomass-normalized production (PB) was also a function of tide height and rainfall in the preceding 24-hr period. We interpreted these results as evidence of surf production 1) as combined contributions of phytoplankton and suspended benthic microalgae, which may confound application of simple P-E models to surf zone production, and 2) being regulated by nutrient source/supply fluctuations independently from other factors. Surf zone biomass and production levels are intermediate between relatively high estuarine values and much lower coastal ocean values. Surf zone production may represent an important trophic connection between these two important ecosystems.

  10. Modelling Vertical Variation of Turbulent Flow Across a Surf Zone Using SWASH

    NARCIS (Netherlands)

    Zijlema, M.

    2014-01-01

    This paper presents the application of the open source non-hydrostatic wave-flow model SWASH to propagation of irregular waves in a barred surf zone, and the model results are discussed by comparing against an extensive laboratory data set. This study focus not only on wave transformation in the sur

  11. Drones at the Beach - Surf Zone Monitoring Using Rotary Wing Unmanned Aerial Vehicles

    Science.gov (United States)

    Rynne, P.; Brouwer, R.; de Schipper, M. A.; Graham, F.; Reniers, A.; MacMahan, J. H.

    2014-12-01

    We investigate the potential of rotary wing Unmanned Aerial Vehicles (UAVs) to monitor the surf zone. In recent years, the arrival of lightweight, high-capacity batteries, low-power electronics and compact high-definition cameras has driven the development of commercially available UAVs for hobbyists. Moreover, the low operation costs have increased their potential for scientific research as these UAVs are extremely flexible surveying platforms. The UAVs can fly for ~12 min with a mean loiter radius of 1 - 3.5 m and a mean loiter error of 0.75 - 4.5 m, depending on the environmental conditions, flying style, battery type and vehicle type. Our experiments using multiple, alternating UAVs show that it is possible to have near continuous imagery data with similar Fields Of View. The images obtained from the UAVs (Fig. 1a), and in combination with surveyed Ground Control Points (GCPs) (Fig. 1b, red squares and white circles), can be geo-rectified (Fig. 1c) to pixel resolution between 0.01 - 1 m and a reprojection error, i.e. the difference between the surveyed GPS location of a GCP and the location of the GCP obtained from the geo-rectified image, of O(1 m). These geo-rectified images provide data on a variety of coastal aspects, such as beach width (Wb(x,t)), surf zone width (Wsf(x,t)), wave breaking location (rectangle B), beach usage (circle C) and location of dune vegegation (rectangle D), amongst others. Additionally, the possibility to have consecutive, high frequency (up to 2 Hz) rectified images makes the UAVs a great data instrument for spatially and temporally variable systems, such as the surf zone. Our first observations with the UAVs reveal the potential to quickly obtain surf zone and beach characteristics in response to storms or for day to day beach information, as well as the scientific pursuits of surf zone kinematics on different spatial and temporal scales, and dispersion and advection estimates of pollutants/dye. A selection of findings from

  12. Zonation of macrofauna across sandy beaches and surf zones along the Dutch coast

    Directory of Open Access Journals (Sweden)

    Gerard Janssen

    2005-06-01

    Full Text Available On nine beaches and two transects in the surf zone along the Dutch coast the presence of benthic macrofauna was studied in relation to basic abiotic characteristics. According to Short's classification system, Dutch beaches are mesotidal and dissipative (Ω = 8.6, and the RTR is low (1.52-1.27, which means that they are not tide-dominated. BSI ranged from 1.4 to 1.1 for the northern and western Dutch coasts respectively and had an overall value of 1.2. The rates of exposure of the beaches varied between 8 and 12, and are therefore regarded as sheltered to moderately exposed. The Dutch beaches display a geographical trend in beach types. Those of the Wadden Sea islands in the northern part of the Netherlands are dissipative, flat, fine-grained, and host high densities of many species of benthic macrofauna. The beaches along the western Dutch coast are less dissipative, steeper, with a higher mean grain size; the species diversity and abundance there are lower. Species diversity and abundance on the beaches increase from the high- to the low-water line. The maximum number of species was found between 0 and -1 m relative to the mean tidal level. The abundance peaks just above the mean tidal level, while the biomass reaches a maximum at the mean tidal level.     Species diversity and abundance are low in the surf zone, but increase towards deeper water. Species numbers are high and the abundance is very high in the trough between the two bars.     The relation between the diversity and abundance of macrobenthic species on the one hand, and the sediment composition, water column depth, and position between the bars on the other show a clear pattern of zonation for the beach, surf zone and near-shore: (1 a supralittoral zone with insects and air-breathing crustaceans, (2 a midshore zone, with intertidal species, (3 a lower shore zone, whose species extend into the shallow surf zone, and (4 a zone of sublittoral fauna in the trough between the

  13. Does human pressure affect the community structure of surf zone fish in sandy beaches?

    Science.gov (United States)

    Costa, Leonardo Lopes; Landmann, Júlia G.; Gaelzer, Luiz R.; Zalmon, Ilana R.

    2017-01-01

    Intense tourism and human activities have resulted in habitat destruction in sandy beach ecosystems with negative impacts on the associated communities. To investigate whether urbanized beaches affect surf zone fish communities, fish and their benthic macrofaunal prey were collected during periods of low and high human pressure at two beaches on the Southeastern Brazilian coast. A BACI experimental design (Before-After-Control-Impact) was adapted for comparisons of tourism impact on fish community composition and structure in urbanized, intermediate and non-urbanized sectors of each beach. At the end of the summer season, we observed a significant reduction in fish richness, abundance, and diversity in the high tourist pressure areas. The negative association between visitors' abundance and the macrofaunal density suggests that urbanized beaches are avoided by surf zone fish due to higher human pressure and the reduction of food availability. Our results indicate that surf zone fish should be included in environmental impact studies in sandy beaches, including commercial species, e.g., the bluefish Pomatomus saltatrix. The comparative results from the less urbanized areas suggest that environmental zoning and visitation limits should be used as effective management and preservation strategies on beaches with high conservation potential.

  14. Experimental and numerical investigation of the internal kinetics of a surf-zone plunging breaker

    DEFF Research Database (Denmark)

    Emarat, Narumon; Forehand, David I.M.; Christensen, Erik Damgaard

    2012-01-01

    Over the last couple of decades both the qualitative and quantitative understanding of breaking waves in the surf zone have greatly increased. This is due to the advances in experimental and numerical techniques. However, few comparisons between these two different investigative techniques...... for surfzone breaking waves have been reported. In this study, a comparison is made between the experimental and numerical investigation of the internal kinematics of a surf-zone plunging breaker. The full-field velocity measuring technique known as Particle Image Velocimetry (PIV) is used in the experiments....... In the hybrid numerical scheme, the main model solves the Navier–Stokes equations using a Finite Volume method and the free-surface is simulated using a Volume of Fluid (VOF) method. An important feature of this work is that, unlike in most other comparisons between numerical and experimental results, the exact...

  15. Generalized Set of Boussinesq equations for Surf Zone Region

    CERN Document Server

    Dutta, R

    2005-01-01

    In this report, generalized wave breaking equations are developed using three dimensional fully nonlinear extended Boussinesq equations to encompass rotational dynamics in wave breaking zone. The derivation for vorticity distributions are developed from Reynold based stress equations.

  16. Rip currents and alongshore flows in single channels dredged in the surf zone

    Science.gov (United States)

    Moulton, Melissa; Elgar, Steve; Raubenheimer, Britt; Warner, John C.; Kumar, Nirnimesh

    2017-05-01

    To investigate the dynamics of flows near nonuniform bathymetry, single channels (on average 30 m wide and 1.5 m deep) were dredged across the surf zone at five different times, and the subsequent evolution of currents and morphology was observed for a range of wave and tidal conditions. In addition, circulation was simulated with the numerical modeling system COAWST, initialized with the observed incident waves and channel bathymetry, and with an extended set of wave conditions and channel geometries. The simulated flows are consistent with alongshore flows and rip-current circulation patterns observed in the surf zone. Near the offshore-directed flows that develop in the channel, the dominant terms in modeled momentum balances are wave-breaking accelerations, pressure gradients, advection, and the vortex force. The balances vary spatially, and are sensitive to wave conditions and the channel geometry. The observed and modeled maximum offshore-directed flow speeds are correlated with a parameter based on the alongshore gradient in breaking-wave-driven-setup across the nonuniform bathymetry (a function of wave height and angle, water depths in the channel and on the sandbar, and a breaking threshold) and the breaking-wave-driven alongshore flow speed. The offshore-directed flow speed increases with dissipation on the bar and reaches a maximum (when the surf zone is saturated) set by the vertical scale of the bathymetric variability.

  17. Wave Height Distribution for Spilling Waves in and outside the Surf Zone

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The wave characteristics affecting coastal sediment transport include wave height, wave period and breaking wave direction. Wave height is a critical factor in determining the amount of sediment transport in the coastal area. The force of sediment transport is much more intense under breaking waves than under non-breaking waves. Breaking waves exhibit various patterns, principally depending on the incident wave steepness and the beach slope. Based on the equations of conservation of mass, momentum and energy, a theoretical model for wave deformation in and outside the surf zone was obtained, which is used to calculate the wave shoaling, wave set-up and setdown and wave height distributions in and outside the surf zone. The analysis and comparison were made about the breaking point location and the wave height decay caused by the wave breaking and the bottom friction. Flume experiments relating to the spilling wave height distribution across the surf zone were conducted to verify the theoretical model. Advanced wave maker, data sampling devices and data processing system were utilized in the flume experiments with a slope covered by sands of different diameters to facilitate the observation and research on the wave transformation and breaking. The agreement between the theoretical and experimental results is good.

  18. Rip currents and alongshore flows in single channels dredged in the surf zone

    Science.gov (United States)

    Moulton, Melissa; Elgar, Steve; Raubenheimer, Britt; Warner, John C.; Kumar, Nirnimesh

    2017-01-01

    To investigate the dynamics of flows near nonuniform bathymetry, single channels (on average 30 m wide and 1.5 m deep) were dredged across the surf zone at five different times, and the subsequent evolution of currents and morphology was observed for a range of wave and tidal conditions. In addition, circulation was simulated with the numerical modeling system COAWST, initialized with the observed incident waves and channel bathymetry, and with an extended set of wave conditions and channel geometries. The simulated flows are consistent with alongshore flows and rip-current circulation patterns observed in the surf zone. Near the offshore-directed flows that develop in the channel, the dominant terms in modeled momentum balances are wave-breaking accelerations, pressure gradients, advection, and the vortex force. The balances vary spatially, and are sensitive to wave conditions and the channel geometry. The observed and modeled maximum offshore-directed flow speeds are correlated with a parameter based on the alongshore gradient in breaking-wave-driven-setup across the nonuniform bathymetry (a function of wave height and angle, water depths in the channel and on the sandbar, and a breaking threshold) and the breaking-wave-driven alongshore flow speed. The offshore-directed flow speed increases with dissipation on the bar and reaches a maximum (when the surf zone is saturated) set by the vertical scale of the bathymetric variability.

  19. Sand transport processes in the surf and swash zones

    NARCIS (Netherlands)

    Zanden, van der Joep

    2016-01-01

    Long-term predictions of beach morphology using numerical models contribute to cost-effective coastal protection strategies. The physics of sand transport in the wave breaking region and the swash zone are not fully understood, leading to poor predictive capability of existing sand transport models

  20. Surf zone fauna of Ecuadorian sandy beaches: Spatial and temporal patterns

    Science.gov (United States)

    Marin Jarrin, J. R.; Vanaverbeke, J.; Fockedey, N.; de Grunauer, M. del P. Cornejo R.; Dominguez-Granda, L.

    2017-02-01

    Sandy beaches and their surf zones are the most common open shoreline habitat; however, surf zone fauna in the tropics is one of the least studied communities in the world. In the current study, we tested the hypothesis that Ecuadorian surf zone hyperbenthos (invertebrates and vertebrates 1-5 mm in length) and epibenthos (fish and macrocrustaceans > 5 mm in length) vary among beaches and seasons. Therefore, the fauna was described and related to environmental variables. In addition, indicator taxa were identified. The hyperbenthos was divided into holo- and mero-hyperbenthos depending on whether taxa were present during their entire life or only early life stages, respectively. Samples were collected at eight different beaches during the wet, dry and intermediate or transitional season during the low spring tide, from 1999 to 2000, using a hyperbenthic sledge and epibenthic trawl. A total of 447 hyperbenthic and 30 epibenthic taxa were collected, most of which were crustaceans and fish, respectively (52 and 60% of taxa). The mysid, Metamysidopsis sp., was the most abundant member of the hyperbenthos (average ± SD: 14,425 ± 40,039 ind. 100 m- 2, present in 92% of samples collected), and the swimming blue crab, Areneus mexicanus, was the most encountered species among the epibenthos (1 ± 1 ind. 100 m- 2, 97% of samples collected). All faunal groups varied among beaches, while the holo-hyperbenthos and less strongly the epibenthos varied among seasons. Variability in the three faunas among beaches, distance from the continental slope and the Guayas estuarine system, and beach water physical characteristics were all strongly correlated suggesting adjacent habitats can influence surf zone biological communities and water physical characteristics. Seasonal effects were related to changes in water physical characteristics among seasons potentially reflecting changes in oceanic currents. These results suggest that, similarly to other beaches around the world, Ecuadorian

  1. Prediction and assimilation of surf-zone processes using a Bayesian network: Part I: Forward models

    Science.gov (United States)

    Plant, Nathaniel G.; Holland, K. Todd

    2011-01-01

    Prediction of coastal processes, including waves, currents, and sediment transport, can be obtained from a variety of detailed geophysical-process models with many simulations showing significant skill. This capability supports a wide range of research and applied efforts that can benefit from accurate numerical predictions. However, the predictions are only as accurate as the data used to drive the models and, given the large temporal and spatial variability of the surf zone, inaccuracies in data are unavoidable such that useful predictions require corresponding estimates of uncertainty. We demonstrate how a Bayesian-network model can be used to provide accurate predictions of wave-height evolution in the surf zone given very sparse and/or inaccurate boundary-condition data. The approach is based on a formal treatment of a data-assimilation problem that takes advantage of significant reduction of the dimensionality of the model system. We demonstrate that predictions of a detailed geophysical model of the wave evolution are reproduced accurately using a Bayesian approach. In this surf-zone application, forward prediction skill was 83%, and uncertainties in the model inputs were accurately transferred to uncertainty in output variables. We also demonstrate that if modeling uncertainties were not conveyed to the Bayesian network (i.e., perfect data or model were assumed), then overly optimistic prediction uncertainties were computed. More consistent predictions and uncertainties were obtained by including model-parameter errors as a source of input uncertainty. Improved predictions (skill of 90%) were achieved because the Bayesian network simultaneously estimated optimal parameters while predicting wave heights.

  2. Spatial and temporal variability in surf zone fish assemblages on the coast of northern New Jersey

    Science.gov (United States)

    Wilber, D. H.; Clarke, D. G.; Burlas, M. H.; Ruben, H.; Will, R. J.

    2003-02-01

    The surf zone fish community along 15 km of northern New Jersey shoreline was sampled every 2 weeks by beach seine in the late summers and early falls of 1995-1999 in conjunction with monitoring of a beach nourishment project. Fifty-seven species representing 30 families were collected during the course of the study. Over 90% of each sampling period's catch was composed of five taxa or less. These taxa included Atlantic and rough silversides, Menidia menidia and Membras martinica, bluefish, Pomatomus saltatrix, and bay and striped anchovies, Anchoa mitchilli and Anchoa hepsetus, with the relative contributions of these taxa varying among years. Both bluefish and anchovy abundances varied by an order of magnitude among years. Size-frequency distributions indicate summer-spawned bluefish recruit to the surf zone habitat as two cohorts in August and October, respectively. Fish abundance and richness were greater at substations closest to rock groins. Taxonomic richness declined along with decreasing water temperature in the fall, but was not correlated with turbidity or tide stage (measured as minutes before or after low tide). The extensive sampling effort undertaken in this study, 2190 seine hauls that captured 295 868 fish, was examined in relation to the number and relative proportions of taxa collected. Species accumulation curves and percent similarity calculations were used to investigate the adequacy of a reduced sampling protocol in characterizing the taxonomic composition of the surf zone fish community. Calculations from eight complete sampling periods (84 seine hauls each) indicate that a reduction in sampling effort by one-half would have yielded on average 75% of the total number of species captured with approximately 85% similarity in relative species composition.

  3. Simultaneous Observations of Beach and Surf-Zone Topography from a sUAS

    Science.gov (United States)

    Slocum, R. K.; Brodie, K. L.; Spore, N.

    2016-02-01

    Beaches and surf-zones can vary rapidly in time and space, necessitating frequent, spatially extensive observations for up-to-date knowledge on their current condition. Traditional surveying methods are expensive, can be dangerous in large wave conditions, and can lack sufficient spatial density. Existing remote sensing technologies have focused on both active sensing (airborne lidar, X-band radar) or passive sensing (electro-optical or infrared imagery) to either directly measure elevations of the beach and seafloor or exploit the optical signal of refracting and breaking waves in the surf-zone. These methods, however, can be prohibitively expensive for widespread, high temporal frequency use, or lack the spatial coverage required to quantify a large stretch of beach. UAS offer an affordable and accessible alternative, but existing COTS UAS sensor suites are not optimized for generation of bathymetry and topography at the same time. Here, we present a new approach using an inexpensive, custom multi-camera sensor designed with a wide field of view for integration on either a fixed wing of multirotor UAS platform. We introduce a processing methodology and workflow to generate a topographic pointcloud and rectified imagery of the water surface using structure from motion algorithms. The topographic pointcloud data is processed to generate a DSM of the beach and extract morphologic parameters (beach slope, dune toe, etc). Rectified imagery of the water surface is used to quantify sandbar location as well as perform a celerity based bathymetric inversion. Accuracy of this methodology is calculated by comparing processed data to lidar pointclouds, as well as photo identifiable targets on the beach and jetted into the surf zone. Funded by the USACE Military Engineering POD:A&U Program and Coastal Field Data Collection Program.

  4. Ichthyoplankton in a southern african surf zone: Nursery area for the postlarvae of estuarine associated fish species?

    Science.gov (United States)

    Whitfield, A. K.

    1989-12-01

    The surf zone ichthyoplankton of Swartvlei Bay was studied between February 1986 and June 1987, with particular emphasis on its potential role as a nursery area for estuarine associated marine fish species. Larvae and/or postlarvae of 16 families were identified from the surf zone, with the Gobiidae, Soleidae, Sparidae and Mugilidae comprising 85·7% of all teleosts sampled. The postlarvae of several taxa (including the six most common species), which utilize the Swartvlei estuary as a juvenile nursery area, were abundant in the surf zone. Conversely, species which are common in nearshore marine waters as juveniles and adults, but seldom enter estuaries, totalled less than 8% of the surf zone ichthyoplankton assemblage. Larval and postlarval densities peaked during summer when water temperatures exceeded 19°C and the estuary mouth was open. Concentrations of ichthyoplankton were highest at those sampling stations closest to the estuary mouth during the summer period. Diel changes in total catches revealed no significant difference between day and night densities; but of the four major taxa, the Mugilidae and Sparidae tended to be more abundant during the day, the Gobiidae at night and the Soleidae showed no distinct pattern. Results from a 24 h sampling session indicated that tidal phase may also be important in governing ichthyoplankton abundance in the surf zone.

  5. Modification of the Undertow and Turbulence by Submerged Vegetation in a Laboratory Surf Zone

    Science.gov (United States)

    Mandel, T.; Suckale, J.; Marras, S.; Maldonado, S.; Koseff, J. R.

    2016-12-01

    Breaking waves in the surf zone are a dominant factor shaping the evolution of our coastlines. The turbulence generated by wave breaking causes sediment resuspension, while wave runup, rundown, and the undertow transport this sediment along and across the shore (Longo et al., 2002). Coastal hazard models must now address the added complications of climate change, including sea level rise, stronger storm events, and ecosystem degradation (Arkema et al., 2013). A robust theoretical understanding of surf zone dynamics is therefore imperative to considering the magnitude and implications of these potential changes. However, little work has been done to extend our current theoretical understanding to realistic beach faces, with aquatic vegetation, reefs, and other roughness elements that might mitigate scour and sedimentation. Clarifying these relationships will help scientists and policy-makers decide where to focus ecosystem restoration and preservation efforts, in order to maximize their protective benefits to infrastructure and economic activity on the coast. In order to evaluate the role of vegetation in coastal protection, we conducted a series of experiments in an idealized laboratory surf zone. We examine the impact of submerged model vegetation on the undertow profile, wave orbital velocities, turbulent kinetic energy, and wave-induced stresses, and compare these results to theoretical formulations that model these quantities. We find that vegetation reduces the wave energy available to be converted to turbulent kinetic energy during breaking, indicating a mechanism to mitigate suspension of sediment. Vegetation also reduces the magnitude of the undertow, likely reducing transport of sediment offshore. These results suggest that vegetation provides significant protective benefits for coastal communities at risk from erosion beyond its well-characterized ability to attenuate wave height, and motivate further work to incorporate these effects into models of near

  6. Internal waves and surf zone water quality at Huntington Beach, California

    Science.gov (United States)

    Wong, H.; Santoro, A.; Nidzieko, N. J.; Hench, J. L.; Boehm, A. B.

    2011-12-01

    This study characterized diurnal, semi-diurnal, and high-frequency internal wave field at Huntington Beach, California, USA and the connection between internal waves and surf zone water quality. An array of oceanographic moorings was deployed in the summer of 2005 and 2006 at 10-20 meter depths offshore of the beach to observe internal waves and cross-shore exchange. Concurrently, surf zone water quality was assessed twice daily at an adjacent station (Huntington State Beach) with measurements of phosphate, dissolved inorganic nitrogen, silicate, chlorophyll a, fecal indicator bacteria, and the human-specific fecal DNA marker in Bacteroidales. Spectral analysis of water temperature shows well-defined spectral peaks at diurnal and semi-diurnal frequencies. Complex Empirical Orthogonal Function analysis of observed currents reveals that the baroclinic component (summation of second to fifth principal components) accounted for 30% of the total variance in the currents in both years, indicating the importance of density-driven flow during the summer when the water column was stratified. The major axis of the first principal component was oriented alongshore, whereas that of the second and third principal components made an angle of 25 to 55 degree with the cross-shore direction. Arrival of cold subthermocline water in the very near shore (within 1 km of the surf zone) was characterized by strong onshore flow near the bottom of the water column. The near bottom, baroclinic, cross-shore current was significantly lag-correlated with the near bottom temperature data along a cross-shore transect towards shore, indicative of shoreward transport of cold subthermocline water. Wavelet analysis of temperature data showed that non-stationary temperature fluctuations were correlated with buoyancy frequency and the near bottom cross-shore baroclinic current. During periods of large temperature fluctuations, the majority of the variance was within the semi-diurnal band; however, the

  7. Assessment of surf zone environmental variables in a southwestern Atlantic sandy beach (Monte Hermoso, Argentina).

    Science.gov (United States)

    Menéndez, M Clara; Fernández Severini, Melisa D; Buzzi, Natalia S; Piccolo, M Cintia; Perillo, Gerardo M E

    2016-08-01

    The aim of this study was to investigate the temporal dynamics (monthly/tidal) of water temperature, salinity, chlorophyll-a (chlo-a), suspended particulate matter (SPM), particulate organic carbon (POC), and dissolved nutrients in the surf zone of Monte Hermoso sandy beach, Argentina. We also aimed to understand the underlying mechanisms responsible for the observed variability. Sampling was carried out approximately monthly (September 2009-November 2010), and all samples were collected in a fixed station during high and low tide. Water temperature showed a clear seasonal variability (July: 9 °C-December: 26.5 °C) and a thermal amplitude of 17.5 °C. Salinity ranged from 33 to 37, without a pronounced seasonality. SPM (10-223 mg L(-1)) and POC concentrations (399-6445 mg C m(-3)) were high in surf zone waters. Chlo-a (0.05-9.16 μg L(-1)) was low and did not evidence the occurrence of surf diatom accumulations. Dissolved nutrient concentration was quite fluctuating. None of the variables seemed to be affected by tidal stage. The results showed how fluctuating the physico-chemical and biological variables can be in this particular system. The observed variability can be related with local beach conditions but also with regional processes. The study area is highly influenced by a neighbor estuary and as a consequence, could be vulnerable to their seasonal and inter-annual dynamics. All of these characteristics must be considered for further studies and planning of the uses of natural resources and should be taken into account in any environmental monitoring program conducted in a similar beach system.

  8. Wave Transformation in a Multi-Bar Surf Zone: Case Study of Lubiatowo (Poland)

    Science.gov (United States)

    Lan, Yuan-Jyh; Hsu, Tai-Wen; Ostrowski, Rafał; Szmytkiewicz, Marek

    2016-06-01

    The paper presents results of field and theoretical investigations of wave transformation in the surf zone near the IBW PAN Coastal Research Station in Lubiatowo (Poland, the south Baltic Sea). The study site displays multi-bar cross-shore profiles that intensively dissipate wave energy, mostly induced by breaking. The main field data comprise wave heights and cross-shore bathymetric profiles.Wave transformation is modelled theoretically by two approaches, namely the IBW PAN phase-averaged wave transformation model and the approach based on the hydraulic jump model, developed by Hsu & Lai (2009) for hydrological situations encountered under the actual conditions of two field campaigns - in 1987 and 1996. Discrepancies between the measured data and the model results are discussed. In general, the model results are in good agreement with the in-situ observations. The comparison of the field data with the computational results concerns a part of the surf zone between about 5 m water depth and the first nearshore stable bar, where the depth amounts to ca. 1.2 m.

  9. A VOF-based numerical model for breaking waves in surf zone

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    This paper introduces a numerical model for studying the evolution of a periodic wave train,shoaling, and breaking in surf zone. The model can solve the Reynolds averaged Navier-Stokes (RANS) equations for a mean flow, and the k-ε equations for turbulence kinetic energy k and turbulence dissipation rate ε. To track a free surface, the volume of fluid (VOF) function, satisfying the advection equation was introduced. In the numerical treatment, third-order upwind difference scheme was applied to the convection terms of the RANS equations in order to reduce the effect of numerical viscosity. The shoaling and breaking processes of a periodic wave train on gently sloping beaches were modeled. The computed wave heights of a sloping beach and the distribution of breaking wave pressure on a vertical wall were compared with laboratory data.

  10. Physical linkages between an offshore canyon and surf zone morphologic change

    Science.gov (United States)

    Hansen, Jeff E.; Raubenheimer, Britt; Elgar, Steve; List, Jeffrey H.; Lippmann, Thomas C.

    2017-04-01

    The causes of surf zone morphologic changes observed along a sandy beach onshore of a submarine canyon were investigated using field observations and a numerical model (Delft3D/SWAN). Numerically simulated morphologic changes using four different sediment transport formulae reproduce the temporal and spatial patterns of net cross-shore integrated (between 0 and 6.5 m water depths) accretion and erosion observed in a ˜300 m alongshore region, a few hundred meters from the canyon head. The observations and simulations indicate that the accretion or erosion results from converging or diverging alongshore currents driven primarily by breaking waves and alongshore pressure gradients. The location of convergence or divergence depends on the direction of the offshore waves that refract over the canyon, suggesting that bathymetric features on the inner shelf can have first-order effects on short-term nearshore morphologic change.

  11. Numerical modelling of wind effects on breaking waves in the surf zone

    Science.gov (United States)

    Xie, Zhihua

    2017-10-01

    Wind effects on periodic breaking waves in the surf zone have been investigated in this study using a two-phase flow model. The model solves the Reynolds-averaged Navier-Stokes equations with the k - 𝜖 turbulence model simultaneously for the flows both in the air and water. Both spilling and plunging breakers over a 1:35 sloping beach have been studied under the influence of wind, with a focus during wave breaking. Detailed information of the distribution of wave amplitudes and mean water level, wave-height-to-water-depth ratio, the water surface profiles, velocity, vorticity, and turbulence fields have been presented and discussed. The inclusion of wind alters the air flow structure above water waves, increases the generation of vorticity, and affects the wave shoaling, breaking, overturning, and splash-up processes. Wind increases the water particle velocities and causes water waves to break earlier and seaward, which agrees with the previous experiment.

  12. Mapping bathymetry in an active surf zone with the WorldView2 multispectral satellite

    Science.gov (United States)

    Trimble, S. M.; Houser, C.; Brander, R.; Chirico, P.

    2015-12-01

    Rip currents are strong, narrow seaward flows of water that originate in the surf zones of many global beaches. They are related to hundreds of international drownings each year, but exact numbers are difficult to calculate due to logistical difficulties in obtaining accurate incident reports. Annual average rip current fatalities are estimated to be ~100, 53 and 21 in the United States (US), Costa Rica, and Australia respectively. Current warning systems (e.g. National Weather Service) do not account for fine resolution nearshore bathymetry because it is difficult to capture. The method shown here could provide frequent, high resolution maps of nearshore bathymetry at a scale required for improved rip prediction and warning. This study demonstrates a method for mapping bathymetry in the surf zone (20m deep and less), specifically within rip channels, because rips form at topographically low spots in the bathymetry as a result of feedback amongst waves, substrate, and antecedent bathymetry. The methods employ the Digital Globe WorldView2 (WV2) multispectral satellite and field measurements of depth to generate maps of the changing bathymetry at two embayed, rip-prone beaches: Playa Cocles, Puerto Viejo de Talamanca, Costa Rica, and Bondi Beach, Sydney, Australia. WV2 has a 1.1 day pass-over rate with 1.84m ground pixel resolution of 8 bands, including 'yellow' (585-625 nm) and 'coastal blue' (400-450 nm). The data is used to classify bottom type and to map depth to the return in multiple bands. The methodology is tested at each site for algorithm consistency between dates, and again for applicability between sites.

  13. Relationship between high-frequency sediment-level oscillations in the swash zone and inner surf zone wave characteristics under calm wave conditions

    Directory of Open Access Journals (Sweden)

    Li Zhiqiang

    2016-01-01

    Full Text Available Swash zone topography rapidly responds to the surf zone waves. Understanding how sandy beaches respond to wave action is critical for beach erosion research, and plays a critical role in the design and maintenance of shore protection structures. The main objectives of this study were to detect the relationship between high-frequency beachface oscillations and surf zone wave characteristics under plunging breakers by using Canonical Correlation Analysis (CCA. The study site is located in Houjiangwan Bay, eastern Guangdong. Topography data were sampled at 6 min intervals. The wave characteristic parameters were calculated by spectrum method. During the field work, the beach showed a reflective state and plunging breakers controlled the surf zone. The beach cusp topography was destructed gradually. The analysis provides 4 canonical correlation processes between the beachface variations and surf zone waves, which explained 95.28% of the overall variation in the data. The result shows wave steepness, the irregularity factor and spectral broadness factor had strong impacts on the topography. The wave steepness was the most important factor for beach profile variations. The results of the present study indicate that data-driven statistical analysis, such as CCA, is useful for analyzing profile response to waves if there is strong correlation between the two variables (beach profiles and wave.

  14. A CFD Model for Wave Transformation and Breaking in the Surf Zone

    Science.gov (United States)

    Chopakatla, S. C.; Lippmann, T. C.; Richardson, J. E.; Thornton, E. B.; Holman, R. A.

    2002-12-01

    Wind-generated surface gravity waves are the major driving force for nearshore circulation and sediment transport. As waves shoal in shallow coastal waters, spectra evolve strongly owing to refraction, nonlinear energy transfers, and dissipation caused by wave breaking and bottom friction. Although considerable progress has been made in modeling wave propagation over complex bottom topography, the dissipation mechanisms are still poorly understood. As a consequence, wave transformation models for the surf zone use crude descriptions of the wave breaking process based on simple saturation criteria or empirical probability distributions that do not always work well for the range of bathymetric and wave conditions commonly observed in nature. In this report, we will discuss the results of studies made with the commercially available Computational Fluid Dynamics (CFD) software system known as FLOW-3D (Flow Science, Inc., Sante Fe, NM). FLOW-3D is designed to solve transient, free surface flow problems based on the solution of the Navier-Stokes equations in three-dimensions. As part of FLOW-3D's formulation, the dissipation of energy is determined by use of coupled turbulence closure schemes (e.g., closure schemes based on the solution of turbulent kinetic energy transport equations). In this study, fine scale pressures and velocities are computed over a two-dimensional beach profile measured during the 1990 Delilah experiment. The model is driven by observed wave spectra obtained in 8 meter water depths, and results compared with a cross-shore array of pressure sensors and current meters spanning the width of the surf zone. In the calculations, wave breaking is a natural consequence of the fluid dynamics and does not require the use of empirical formulations, or breaking criteria. The spatial and temporal variability in the wave breaking locations will be compared with video observations obtained during the experiment. Good comparison between modeled and observed wave

  15. Temporal and spatial patterns for surf zone bacteria before and after disinfection of the orange county sanitation district effluent

    Science.gov (United States)

    Robertson, G.L.; Noble, M.A.; Xu, J. P.; Rosenfeld, L.K.; McGee, C.D.

    2005-01-01

    Data from pre- and post-disinfection fecal indicator bacteria (FIB) samples from final effluent, an offshore ocean outfall, and surf zone stations off Huntington Beach, CA were compared. Analysis of the results from these data sets confirmed that the ocean outfall was not the FIB source responsible for the postings and closures of local beaches that have occurred each summer since 1999. While FIB counts in the final effluent and offshore showed several order of magnitude reductions after disinfection, there were no significant reductions at the nearby surf zone stations. Additionally, the FIB spectral patterns suggest different sources. The dominant fortnightly cycle suggested that the source was related to the wetting and draining of the land from large spring tide tidal excursions.

  16. Temporal and spatial variability of fecal indicator bacteria in the surf zone off Huntington Beach, CA

    Science.gov (United States)

    Rosenfeld, L.K.; McGee, C.D.; Robertson, G.L.; Noble, M.A.; Jones, B.H.

    2006-01-01

    Fecal indicator bacteria concentrations measured in the surf zone off Huntington Beach, CA from July 1998-December 2001 were analyzed with respect to their spatial patterns along 23 km of beach, and temporal variability on time scales from hourly to fortnightly. The majority of samples had bacterial concentrations less than, or equal to, the minimum detection limit, but a small percentage exceeded the California recreational water standards. Areas where coliform bacteria exceeded standards were more prevalent north of the Santa Ana River, whereas enterococci exceedances covered a broad area both north and south of the river. Higher concentrations of bacteria were associated with spring tides. No temporal correspondence was found between these bacterial events and either the timing of cold water pulses near shore due to internal tides, or the presence of southerly swell in the surface wave field. All three fecal indicator bacteria exhibited a diel cycle, but enterococci rebounded to high nighttime values almost as soon as the sun went down, whereas coliform levels were highest near the nighttime low tide, which was also the lower low tide. ?? 2006 Elsevier Ltd. All rights reserved.

  17. Surf Zone Hydrodynamics and its Utilization in Biotechnical Stabilization of Water Reservoir Banks

    Directory of Open Access Journals (Sweden)

    Petr Pelikán

    2014-01-01

    Full Text Available The water reservoir banks are eroded mainly by two factors. The first one is wave action (i.e. wave abrasion affecting the bank in direction from the reservoir. The second one is the influence of water flowing downward over the bank surface in direction from land into the reservoir (e.g. rainfall. The determination of regular altitudinal emplacement of proper designed particular biotechnical stabilization elements is the most important factor on which the right functionality of whole construction depends. Surf zone hydrodynamics solves the wave and water level changes inside the region extending from the wave breaking point to the limit of wave up-rush. The paper is focused on the utilization of piece of knowledge from a part of sea coast hydrodynamics and new approach in its application in the conditions of inland water bodies when designing the biotechnical stabilization elements along the shorelines. The “reinforced grass carpets” as a type of biotechnical method of bank stabilization are presented in the paper; whether the growth of grass root system is dependent on presence or absence of geomats in the soil structure and proceeding of their establishment on the shorelines.

  18. Prediction and assimilation of surf-zone processes using a Bayesian network: Part II: Inverse models

    Science.gov (United States)

    Plant, Nathaniel G.; Holland, K. Todd

    2011-01-01

    A Bayesian network model has been developed to simulate a relatively simple problem of wave propagation in the surf zone (detailed in Part I). Here, we demonstrate that this Bayesian model can provide both inverse modeling and data-assimilation solutions for predicting offshore wave heights and depth estimates given limited wave-height and depth information from an onshore location. The inverse method is extended to allow data assimilation using observational inputs that are not compatible with deterministic solutions of the problem. These inputs include sand bar positions (instead of bathymetry) and estimates of the intensity of wave breaking (instead of wave-height observations). Our results indicate that wave breaking information is essential to reduce prediction errors. In many practical situations, this information could be provided from a shore-based observer or from remote-sensing systems. We show that various combinations of the assimilated inputs significantly reduce the uncertainty in the estimates of water depths and wave heights in the model domain. Application of the Bayesian network model to new field data demonstrated significant predictive skill (R2 = 0.7) for the inverse estimate of a month-long time series of offshore wave heights. The Bayesian inverse results include uncertainty estimates that were shown to be most accurate when given uncertainty in the inputs (e.g., depth and tuning parameters). Furthermore, the inverse modeling was extended to directly estimate tuning parameters associated with the underlying wave-process model. The inverse estimates of the model parameters not only showed an offshore wave height dependence consistent with results of previous studies but the uncertainty estimates of the tuning parameters also explain previously reported variations in the model parameters.

  19. Size spectra of bubbles in the foam patches and of sea salt nuclei over the surf zone

    OpenAIRE

    Podzimek, Josef

    2011-01-01

    The size distribution of bubbles in the foam patches and the size distribution of giant chloridenuclei over the surf zone both follow the Nukiyama-Tanassava size distribution function. Theslope of the size distribution curve for bubbles depends, however, on the residence time of thefoam patch at the ocean surface. The best fit of the sea salt nuclei size distribution curve wasfound for s = 0.333 in the Nukiyama-Tanassava distribution.DOI: 10.1111/j.1600-0889.1984.tb00241.x

  20. Numerical study of pollutant movement in waves and wave-induced long-shore currents in surf zone

    Institute of Scientific and Technical Information of China (English)

    TANG Jun; SHEN Yongming; QIU Dahong

    2008-01-01

    Water waves,wave-induced long-shore currents and movement of pollutants in waves and currents have been numerically studied based on the hyperbolic mild-slope equation,the shallow water equation,as well as the pollutant movement equation,and the nu- merical results have also been validated by experimental data.It is shown that the long-shore current velocity and wave set-up in- crease with the increasing incident wave amplitude and slope steepness of the shore plane;the wave set-up increases with the in- creasing incident wave period;and the pollutant morement proceeds more quiekly with the increasing incident wave amplitude and slope steepness of the shore palane.In surf zones,the long-shore currents induced by the inclined incident waves have effectively affected the pollutant movement.

  1. Implementation and modification of a three-dimensional radiation stress formulation for surf zone and rip-current applications

    Science.gov (United States)

    Kumar, N.; Voulgaris, G.; Warner, J.C.

    2011-01-01

    Regional Ocean Modeling System (ROMS v 3.0), a three-dimensional numerical ocean model, was previously enhanced for shallow water applications by including wave-induced radiation stress forcing provided through coupling to wave propagation models (SWAN, REF/DIF). This enhancement made it suitable for surf zone applications as demonstrated using examples of obliquely incident waves on a planar beach and rip current formation in longshore bar trough morphology (Haas and Warner, 2009). In this contribution, we present an update to the coupled model which implements a wave roller model and also a modified method of the radiation stress term based on Mellor (2008, 2011a,b,in press) that includes a vertical distribution which better simulates non-conservative (i.e., wave breaking) processes and appears to be more appropriate for sigma coordinates in very shallow waters where wave breaking conditions dominate. The improvements of the modified model are shown through simulations of several cases that include: (a) obliquely incident spectral waves on a planar beach; (b) obliquely incident spectral waves on a natural barred beach (DUCK'94 experiment); (c) alongshore variable offshore wave forcing on a planar beach; (d) alongshore varying bathymetry with constant offshore wave forcing; and (e) nearshore barred morphology with rip-channels. Quantitative and qualitative comparisons to previous analytical, numerical, laboratory studies and field measurements show that the modified model replicates surf zone recirculation patterns (onshore drift at the surface and undertow at the bottom) more accurately than previous formulations based on radiation stress (Haas and Warner, 2009). The results of the model and test cases are further explored for identifying the forces operating in rip current development and the potential implication for sediment transport and rip channel development. Also, model analysis showed that rip current strength is higher when waves approach at angles of 5

  2. Three-dimensional modelling of wave-induced current from the surf zone to the inner shelf

    Directory of Open Access Journals (Sweden)

    H. Michaud

    2011-12-01

    Full Text Available We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a, following the simplified equations of Bennis et al. (2011 which use glm2z-RANS theory (Ardhuin et al., 2008b. These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010 and SWAN (Booij et al., 1999. The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009 and Uchiyama et al. (2010. A comparison is also made with the laboratory measurements of Haller et al. (2002 of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data.

    Finally, a realistic case of energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea for which currents are available at different depths as well as an accurate bathymetric database of the 0–10 m depth range, is then simulated. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0–15 m depth zone. More precisely, two distinct cases are identified: when waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts

  3. Three-dimensional modelling of wave-induced current from the surf zone to the inner shelf

    Directory of Open Access Journals (Sweden)

    H. Michaud

    2012-08-01

    Full Text Available We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a following the simplified equations of Bennis et al. (2011 which use glm2z-RANS theory (Ardhuin et al., 2008c. These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010 and SWAN (Booij et al., 1999. The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009and Uchiyama et al. (2010. A comparison is also made with the laboratory measurements of Haller et al. (2002 of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data.

    Finally, a realistic case is simulated with energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea for which currents are available at different depths as well as an accurate bathymetric database of the 0–10 m depth range. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0–15 m depth zone. More precisely, two distinct cases are identified: When waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts in the

  4. Spatial and temporal variations of diurnal ichthyofauna on surf-zone of São Francisco do Itabapoana beaches, Rio de Janeiro State, Brazil

    Directory of Open Access Journals (Sweden)

    Gomes Marcelo Paes

    2003-01-01

    Full Text Available Spatial and temporal variations of diurnal ichthyofauna and the environmental variables influences on its distribution were studied at the surf-zone of three beaches of São Francisco do Itabapoana, northern coast of Rio de Janeiro, Brazil. From August/1999 to August/2000, three beach seine hauls were made monthly, and environmental variables were recorded. A total number of 4,562 fishes (74,155g were sampled at the three beaches, where estuarine-dependent species prevailed (44%, followed by marine (31%, estuarine (19% and freshwater species (3%. Species richness, number of individuals and wet weight were significantly higher at Gargaú, followed by Manguinhos and Barra do Itabapoana, respectively. Canonical Correspondence Analysis highlighted influences of the rivers flushing, salinity and plant abundance on the diurnal ichthyofauna distribution and dynamics of São Francisco do Itabapoana surf-zone.

  5. The design and implementation of a semi-autonomous surf-zone robot using advanced sensors and a common robot operating system

    OpenAIRE

    Hickle, Jason.; Halle, Steven

    2011-01-01

    Approved for public release; distribution is unlimited. A semi-autonomous vehicle, MONTe, was designed, modeled and tested for deployment and operation in a surf-zone coastal environment. The MONTe platform was designed to use unique land based locomotion that incorporates wheel-legs(WhegsTM) and a tail. Semi-autonomy was realized with data from onboard sensors and implemented through open source Robot Operating System (ROS), hosted on an Ubuntu Linux based processor. Communications vi...

  6. Structural aspects of the surf-zone fish assemblage at King's Beach, Algoa Bay, South Africa: Long-term fluctuations

    Science.gov (United States)

    Lasiak, Theresa A.

    1984-04-01

    Regular collections of fish were obtained from the surf-zone at King's Beach, Algoa Bay. A total of 3970 fish, representing 50 species was caught with a coarse net and 16 857 fish, representing 37 species, were caught with a fine net. Predominant species were the blacktail, Diplodus sargus; the sand steenbras, Lithognathus mormyrus; the mullet, Liza richardsoni; the gorrie, Pomadasys olivaceum; the white stumpnose, Rhabdosargus globiceps; the sandshark, Rhinobatos annulatus; and the streepie, Sarpa salpa. No seasonal trends were discernible in the overall abundance or species diversity. The species composition of the dominant component of the fish assemblage varied considerably. This indicated instability in the community structure and cast doubts on the applicability of a classic community concept and the use of diversity indices. Neither classification nor correspondence analysis were of any use in identifying a characteristic species component. Multiple regression analysis indicated that short-term variations in wind conditions might be a primary determinant of fluctuations in abundance. The lack of seasonality in the community parameters may reflect the fact that short-term variability masks seasonal perturbations.

  7. The Surf Zone Ichthyoplankton Adjacent to an Intermittently Open Estuary, with Evidence of Recruitment during Marine Overwash Events

    Science.gov (United States)

    Cowley, P. D.; Whitfield, A. K.; Bell, K. N. I.

    2001-03-01

    The composition, structure and seasonality of ichthyoplankton in the surf zone adjacent to the mouth of the intermittently open East Kleinemonde Estuary (33°32'S, 27°03'E) were investigated over a period of 2 years. Altogether 451 fishes, representing at least 21 taxa from 14 families, were collected. The assemblage was dominated by postflexion larvae of euryhaline marine species that are dependent on estuaries as nursery areas. The sparid Rhabdosargus holubi was the most abundant taxon and constituted more than 77% of the total catch. A distinct modal size class was identified for R. holubi , while the mean individual size of this and other abundant taxa was comparable to the observed recruitment size range reported from a wide variety of estuarine nursery habitats in southern Africa. Periodic regression analyses revealed significant peaks in abundance of larval R. holubi during late winter (August), at down and dusk, at new and full moon (spring tides), and on the flood stage of the tidal cycle. Evidence for estuarine immigration during marine overwash events (surging rough seas that enter the estuary) is provided by (1) the stranding of postflexion larvae in the region of the closed estuary mouth following these events, and (2) back extrapolation from length modes within the estuary to coincide with such an event. The advantages and disadvantages of such a recruitment strategy are discussed.

  8. Quantitative assessment of surf-produced sea spray aerosol

    NARCIS (Netherlands)

    Neele, F.P.; De Leeuw, G.; Jansen, M.; Stive, M.J.F.

    1998-01-01

    The first results are presented from a quantitative model describing the aerosol production in the surf zone. A comparison is made with aerosol produced in the surf zone as measured during EOPACE experiments in La Jolla and Monterey. The surf aerosol production was derived from aerosol concentration

  9. Quantitative assessment of surf-produced sea spray aerosol

    NARCIS (Netherlands)

    Neele, F.P.; De Leeuw, G.; Jansen, M.; Stive, M.J.F.

    1998-01-01

    The first results are presented from a quantitative model describing the aerosol production in the surf zone. A comparison is made with aerosol produced in the surf zone as measured during EOPACE experiments in La Jolla and Monterey. The surf aerosol production was derived from aerosol concentration

  10. Geometry and dynamics of wave ripples in the nearshore zone of a coarse sandy beach

    Science.gov (United States)

    Masselink, G.; Austin, M. J.; O'Hare, T. J.; Russell, P. E.

    2007-10-01

    Extensive measurements of ripple characteristics and dynamics along with associated suspended sediment fluxes and hydrodynamic conditions were made in the shoaling and surf zones of a macrotidal coarse grained beach at Sennen Cove, Cornwall, England (median grain diameter 0.69 mm). Suborbital vortex ripples were observed during the majority of the study period with height ˜5 cm and length ˜35 cm. The scale and shape of the ripples did not vary significantly as the bed shear stress increased during wave shoaling and breaking. However, ripple migration rates (onshore directed) were strongly dependent on their location relative to the breakpoint, increasing from ˜0.1 cm min-1 under shoaling waves to 2 cm min-1 in the outer surf zone during low-energy conditions. Farther inside the surf zone, ripples persisted but migration rates slowed, probably owing to the presence of the offshore-directed mean flow which impedes landward migration of the ripples. Under low-wave conditions (during which measured sediment fluxes peaked around the outer surf zone and decreased through the saturated surf zone), bed form transport rates under shoaling waves were of the same magnitude as net suspended sediment fluxes but at least an order of magnitude smaller in the outer surf zone. Under high-energy conditions (during which suspended sediment fluxes in the surf zone were offshore directed owing to the presence of the seaward directed mean flow), bed form transport rates were several orders of magnitude smaller than suspended fluxes.

  11. Retrieval system for emplaced spent unreprocessed fuel (SURF) in salt bed depository. Baseline concept criteria specifications and mechanical failure probabilities

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, E.E.; McCleery, J.E.

    1979-05-01

    One of the integral elements of the Nuclear Waste Management Program is the material handling task of retrieving Canisters containing spent unreprocessed fuel from their emplacement in a deep geologic salt bed Depository. A study of the retrieval concept data base predicated this report. In this report, alternative concepts for the tasks are illustrated and critiqued, a baseline concept in scenario form is derived and basic retrieval subsystem specifications are presented with cyclic failure probabilities predicted. The report is based on the following assumptions: (a) during retrieval, a temporary radiation seal is placed over each Canister emplacement; (b) a sleeve, surrounding the Canister, was initially installed during the original emplacement; (c) the emplacement room's physical and environmental conditions established in this report are maintained while the task is performed.

  12. Preliminary assessment of surf-zone and estuarine line-fish species of the Dwesa-Cwebe Marine Protected Area, Eastern Cape, South Africa

    Directory of Open Access Journals (Sweden)

    Jan A. Venter

    2012-09-01

    Full Text Available A preliminary assessment of surf-zone and estuarine line fish was carried out in the DwesaCwebe Marine Protected Area (MPA, on the Wild Coast, South Africa. The purpose was to provide baseline data on inshore line-fish stocks in the MPA. A total of 28 species was recorded, of which 53% have a conservation status reflecting some concern and 43% are endemic to southern Africa. This highlights the value of the MPA for protection of important line-fish species. Within the MPA, localised differences were detected in species diversity, size frequency and catch per unit effort between unexploited and illegally exploited areas. These differences were more prominent in slow growing, long-lived species. It thus appears that illegal exploitation is negatively affecting fish populations within the MPA, which counteract and potentially could eliminate the benefits of fish protection typically associated with no-take MPAs. These results highlight the need for improved law enforcement and better communication with neighbouring communities to increase awareness. It is further recommended that the current no-take status of the MPA should be maintained. In addition, baseline fisheries information was collected on certain fish species that could be used to inform future conservation management of the MPA.Conservation implications: The Dwesa-Cwebe Marine Protected Area is unique and important for the conservation of key surf zone and estuarine fish species. However there is a significant risk to the fish populations due to illegal exploitation. Key interventions should include enhanced law enforcement but, more important, the creation of alternative livelihoods and long term sustainable benefits to local communities.

  13. DETERMINATION OF MARGINALLY STABLE ZONE OF GAS-SOLID MAGNETICALLY FLUIDIZED BEDS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The void fluctuation of magnotically fluidized beds was analyzed and their maginally stable zone was determined. The analysis was based on the two-phase model of magnetically fluidized bed and wave theory. The marginally stable zone determined by this paper matches well with the experimental results.

  14. Implementation of the vortex force formalism in the coupled ocean-atmosphere-wave-sediment transport (COAWST) modeling system for inner shelf and surf zone applications

    Science.gov (United States)

    Kumar, Nirnimesh; Voulgaris, George; Warner, John C.; Olabarrieta, Maitane

    2012-01-01

    The coupled ocean-atmosphere-wave-sediment transport modeling system (COAWST) enables simulations that integrate oceanic, atmospheric, wave and morphological processes in the coastal ocean. Within the modeling system, the three-dimensional ocean circulation module (ROMS) is coupled with the wave generation and propagation model (SWAN) to allow full integration of the effect of waves on circulation and vice versa. The existing wave-current coupling component utilizes a depth dependent radiation stress approach. In here we present a new approach that uses the vortex force formalism. The formulation adopted and the various parameterizations used in the model as well as their numerical implementation are presented in detail. The performance of the new system is examined through the presentation of four test cases. These include obliquely incident waves on a synthetic planar beach and a natural barred beach (DUCK' 94); normal incident waves on a nearshore barred morphology with rip channels; and wave-induced mean flows outside the surf zone at the Martha's Vineyard Coastal Observatory (MVCO).

  15. Surf Tourism, Artificial Surfing Reefs, and Environmental Sustainability

    Science.gov (United States)

    Slotkin, Michael H.; Chambliss, Karen; Vamosi, Alexander R.; Lindo, Chris

    2009-07-01

    This paper explores the confluence of surf tourism, artificial surfing reefs, and sustainability. Surfing is an ascendant recreational and tourism industry and artificial surfing reefs are a new and innovative technology and product. Presented within the context of Florida's Space Coast, empirical details on surf tourism are discussed along with the possible implications for sustainability.

  16. The role of bedding in the evolution of meso- and microstructural fabrics in fault zones

    Science.gov (United States)

    Ishii, Eiichi

    2016-08-01

    To investigate the role of bedding in the evolution of meso- and microstructural fabrics in fault zones, detailed microscopic, mineralogical, and geochemical analyses were conducted on bedding-oblique and bedding-parallel faults that cut a folded Neogene siliceous mudstone that contains opal-CT, smectite, and illite. An analysis of asymmetric structures in the fault gouges indicates that the secondary fractures associated with each fault exhibit contrasting characteristics: those of the bedding-oblique fault are R1 shears, whereas those of the bedding-parallel fault are reactivated S foliation. The bedding-oblique fault shows the pervasive development of S foliation, lacks opal-CT, and has low SiO2/TiO2 ratios only in gouge, whereas the bedding-parallel fault exhibits these characteristics in both gouge and wall rocks. The development of S foliation and the lack of silica can result from local ductile deformation involving the sliding of phyllosilicates, coupled with pressure solution of opal-CT. Although such deformation can occur in gouge, the above results indicate that it may occur preferentially along bedding planes, preceding the formation of a gouge/slip surface. Thus, in sedimentary rocks that contain phyllosilicates and soluble minerals, bedding can influence the rheological evolution of meso- and microstructural fabrics in fault zones.

  17. Swash-zone velocity profiles and bed stress on a natural beach

    Science.gov (United States)

    Puleo, J. A.; Lanckriet, T.; Wang, P.

    2010-12-01

    The swash zone, where waves wash up and down the beach, is a difficult region of the nearshore to quantify velocity. Water depths in the swash zone can range from zero to over a meter and flows can be turbulent and bubble-laden. Swash flows are often assumed to be depth uniform partially because current meters typically cannot be placed closer than a few centimeters above the bed, although some previous field research has shown flow variability within elevations several centimeters above the bed. The swash-zone boundary layer, where flow momentum is transferred to the bed, must extend below elevations accessible to conventional current meters. Laser Doppler and video-based techniques have shown the shape of this boundary layer over smooth and rough impermeable and mobile granular beds in the laboratory, but to the author’s knowledge, the swash-zone boundary layer below 2-3 cm has never been measured on a natural beach. During August 16-19, 2010 a swash-zone study was conducted at several beaches in west-central Florida in an effort to measure the swash-zone boundary layer and bed shear stress. A new acoustic velocity profiling sensor, the Nortek Vectrino-II, has the capability to measure x, y and z velocity at 1mm increments over 30 bins at the finest setting. During the study 3 Vectrino-II’s were deployed with different profiling ranges in an effort to capture the boundary layer structure. Utilizing the velocity profile, bed stress is estimated using several different techniques including the “law of the wall” approach and nearbed velocity gradients. Preliminary results of the swash-zone boundary layer structure, friction velocity and bed stress as a function of swash phase will be discussed.

  18. Surfing on the Spectrum

    Science.gov (United States)

    Apel, Laura

    2007-01-01

    Israel Paskowitz loves surfing. As a former competitive surfer, he has spent much of his life in the ocean and absorbed in a community of athletes that share a special connection with the water. Surfing is often thought of as a spiritual hobby that brings peace and relaxation to those who experience it. However, it was not until Israel's son,…

  19. Surfing on the Spectrum

    Science.gov (United States)

    Apel, Laura

    2007-01-01

    Israel Paskowitz loves surfing. As a former competitive surfer, he has spent much of his life in the ocean and absorbed in a community of athletes that share a special connection with the water. Surfing is often thought of as a spiritual hobby that brings peace and relaxation to those who experience it. However, it was not until Israel's son,…

  20. Flow Pattern in a Fluidized Bed with a Non-fluidized Zone

    DEFF Research Database (Denmark)

    Lin, Weigang; Dam-Johansen, Kim; Van den Bleek, Cor. M.

    1997-01-01

    The flow pattern of a fluidized bed with non-fluidized zones is investigated both experimentally and theoretically. Experiments were carried out in such a way that air was introduced only through part of the distributor. The results show a significant amount of air flowing to the zone where no air...... is introduced. However, once the gas velocity exceeds the minimum fluidization velocity in the zone where the air is introduced, the cross-flow hardly changes upon further increase of the gas velocity. A continuity equation and Ergun's equation are used to describe the flow pattern and pressure distribution...... over the bed. Very good agreement between the experimental and calculated results is achieved without any fitting parameter. The results are relevant to the understanding of heat transfer behaviour of a fluidized bed combustor (FBC) that is only partly fluidized to control its load....

  1. Linear stability analysis reveals exclusion zone for sliding bed transport

    Directory of Open Access Journals (Sweden)

    Talmon Arnold M.

    2015-06-01

    Full Text Available A bend or any another pipe component disturbs solids transport in pipes. Longitudinal pressure profiles downstream of such a component may show a stationary transient harmonic wave, as revealed by a recent settling slurry laboratory experiment. Therefore the fundamental transient response of the two-layer model for fully stratified flow is investigated as a first approach. A linear stability analysis of the sliding bed configuration is conducted. No stationary transient harmonic waves are found in this analysis, but adaptation lengths for exponential recovery are quantified. An example calculation is given for a 0.1 m diameter pipeline.

  2. Lateral Solids Mixing in the Dense Zone of a Circulating Fluidized Bed

    Institute of Scientific and Technical Information of China (English)

    YANGHairui; LUEJunfu; 等

    2002-01-01

    Lateral solid mixing was investigated experimentally in the dense zone of a 900mm×100mm×5.2m rectangular circulating fluidized bed riser.Using heated tracer injection,the lateral solid dispersion was determined by measuring the temperature response at different lateral positions. Furthermore, a one-dimensional dispersion model,which describes the solid mixing in the dense zone,is presented.The experimental results were used to determine the lateral particle dispersion coefficient under various operating conditions. A correlation of dispersion coefficient with bed height, gas velocity,and particle size is also proposed.

  3. A model for the spray zone in early-stage fluidized bed granulation

    NARCIS (Netherlands)

    Schaafsma, S. H.; Vonk, P.; Kossen, N. W. F.; Hoffmann, A. C.

    2006-01-01

    The formation of granules in the spray zone of a top-spray fluid-bed granulation process using a known and uniform drop-size is studied experimentally and theoretically. Experimental results indicate a multi-modal size distribution of spherically-shaped granules. A model is presented to explain this

  4. ODOR REMOVAL IN WASTEWATER TREATED BY ROOTS ZONE BED (WETLANDS

    Directory of Open Access Journals (Sweden)

    Waldir Nagel Schirmer

    2010-05-01

    Full Text Available The wetland is a system that uses the roots plants (macrophyte in the domestic wastewater treatment. The mechanisms (physical, chemical and biological ones of organic matter stabilization of effluent and odorous compounds (commonly found in anaerobic biological degradation involve soil, microorganisms and plants. This work uses olfactometry (technical of odors analysis as tool in the evaluation of the odor remotion of sewage treated by Root Zone Sewage Treatment Station (RZSTS in an rural community of Irati City (Brazil. For a better evaluation of the effectiveness of the odor remotion, the odors (rather and downstream treatment has been evaluated in the three olfactometric categories (intensity, character and hedonic tone, according to European standards. The results had pointed that wastewater treated still presented perceivable levels of odor even after significant reduction in intensity (the reduction in the category “very strong” was 89,3% between the entrance and outlet wastewater of the macrophyes station. Moreover, “offensive” category was cited by the jury in the two effluent (entrance and outlet one, with 91% and 40% of answers, respectively; however, in this same question, the wastewater treated presented less aggressive and unpleasant odors. In a general way, the station proposed revealed efficiency in odorous compounds stabilization by anaerobic biological degradation.

  5. Three-port operation in three-zone simulated moving bed chromatography.

    Science.gov (United States)

    Kim, Kyung-Min; Song, Ji-Yeon; Lee, Chang-Ha

    2014-05-02

    A new operating method, namely three-port operation in a three-zone simulated moving bed (TT-SMB), was developed to improve the separation performance of simulated moving bed (SMB) chromatography. In the TT-SMB, the switching period consists of two steps; extract outlet port is closed at the first step for raffinate production and raffinate outlet port is closed at the second step for extract production. As a result, three ports were used in each step of the three-zone SMB operation. The separation performance of TT-SMB was compared with conventional three- and four-zone SMBs in terms of purity, recovery, productivity, and eluent consumption. A conventional three-zone SMB operation usually produced the contaminated portion at the product outlet node during the switching period. However, such phenomenon could be prevented by using the TT-SMB operation because one product outlet port was closed at each step. Compared to the conventional three-zone SMB, all performance parameters improved with the use of TT-SMB, and the improvement in purity and recovery was significant (up to 7%). Adjusting the step ratio played a key role in the trade-off between the performance parameters. The purity, recovery, and productivity of TT-SMB at well-designed step ratio conditions are up to 3% higher than those of the conventional four-zone methods (1-1-1-1 configuration). Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Q&A: Surfing scientist

    Science.gov (United States)

    Hoffman, Jascha

    2013-11-01

    Historian Peter Westwick and his colleague Peter Neushul thought up their scientific history of surfing, The World in the Curl (Crown, 2013), on boards off the coast of California. As the winter surfing season gets into full swing, Westwick talks about warfare, wetsuits, climate change and forecasting surf.

  7. Tiny is mighty: seagrass beds have a large role in the export of organic material in the tropical coastal zone

    NARCIS (Netherlands)

    Gillis, L.G.; Ziegler, A.D.; van Oevelen, D.; Cathalot, C.; Herman, P.; Wolters, J.W.; Bouma , T.J.

    2014-01-01

    Ecosystems in the tropical coastal zone exchange particulate organic matter (POM) with adjacent systems, but differences in this function among ecosystems remain poorly quantified. Seagrass beds are often a relatively small section of this coastal zone, but have a potentially much larger ecological

  8. SURF Model Calibration Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    SURF and SURFplus are high explosive reactive burn models for shock initiation and propagation of detonation waves. They are engineering models motivated by the ignition & growth concept of high spots and for SURFplus a second slow reaction for the energy release from carbon clustering. A key feature of the SURF model is that there is a partial decoupling between model parameters and detonation properties. This enables reduced sets of independent parameters to be calibrated sequentially for the initiation and propagation regimes. Here we focus on a methodology for tting the initiation parameters to Pop plot data based on 1-D simulations to compute a numerical Pop plot. In addition, the strategy for tting the remaining parameters for the propagation regime and failure diameter is discussed.

  9. Longshore sediment transport in the surf zone based on different formulae: A case study along the central west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Shanas, P.R.; Dora, G.U.; Johnson, G.; Philip, C.S.

    Understanding longshore sediment transport (LST) is a prerequisite for designing an effective coastal zone management strategy. The present study estimates the LST along the central west coast of India based on four bulk LST formulae: (1...

  10. A two-dimensional model for gas mixing in the upper dilute zone of a circulating fluidized bed

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, M.; Schoenfelder, H.; Werther, J. [Technical University of Hamburg-Harburg, Hamburg (Germany)

    1995-10-01

    A two-dimensional two-phase flow model for gas/solid flow and gas mixing in the upper zone of a circulating fluidized bed is described. Continuous functions are used to describe variations of local flow parameters horizontally and vertically. Numerical values of dispersion parameters and interfacial mass transfer coefficients are derived from the results of tracer gas mixing experiments. There is good agreement between calculated and measured tracer gas profiles in the upper dilute zone of the circulating fluidized bed. The model is applicable to calculation of chemical reactions in CFB risers. 37 refs., 26 figs., 3 tabs.

  11. Investigations on Cationic Exchange Capacity and Unused Bed Zone according to operational conditions in a Fixed Bed Reactor for water lead removal by a natural zeolite

    Directory of Open Access Journals (Sweden)

    Barthélemy JP.

    2006-01-01

    Full Text Available In this study, attention has been focused on the behaviour of the Cationic Exchange Capacity (CEC and the Unused Bed Zone (UBZ, according to the operating parameters (bed length: L, column diameter: D, particle diameter: d and fl ow rate: Q in a Fixed Bed Reactor (FBR. The investigations are performed for a single-component study of lead on New Zealand clinoptilolite at 25 ± 1°C. The results show a constant operating CEC of 1.00 ± 0.015 meq.g-1 which is independent of the operational parameters listed above. The performance of the operations expressed as UBZ, shows an optimum for the ratio L/D (bed length and column diameter fi xed at 18.1, for Q = 2.9 BV.h-1 (bed volume per hour and particle diameter d = 0.38 mm (the ratio particle diameter on column diameter d/D at 0.057. This maximum performance is reached with the lowest UBZ value of 5.6% of the operating CEC. Overall interpretation drawn from the results according to UBZ shows that decreasing the particles size improves the performance of ion exchange process; as well as decreasing the fl ow rate. Nevertheless, the increase of L/D to a certain extent does not improve ion exchange performances.

  12. Surfing the quantum world

    CERN Document Server

    Levin, Frank S

    2017-01-01

    The ideas and phenomena of the quantum world are strikingly unlike those encountered in our visual world. Surfing the Quantum World shows why and how this is so. It does this via a historical review and a gentle introduction to the fundamental principles of quantum theory, whose core concepts and symbolic representations are used to explain not only "ordinary" microscopic phenomena like the properties of the hydrogen atom and the structure of the Periodic Table of the Elements, but also a variety of mind-bending phenomena. Readers will learn that particles such as electrons and photons can behave like waves, allowing them to be in two places simultaneously, why white dwarf and neutron stars are gigantic quantum objects, how the maximum height of mountains has a quantum basis, and why quantum objects can tunnel through seemingly impenetrable barriers. Included among the various interpretational issues addressed is whether Schrodinger's cat is ever both dead and alive.

  13. Tiny is mighty: seagrass beds have a large role in the export of organic material in the tropical coastal zone.

    Directory of Open Access Journals (Sweden)

    Lucy G Gillis

    Full Text Available Ecosystems in the tropical coastal zone exchange particulate organic matter (POM with adjacent systems, but differences in this function among ecosystems remain poorly quantified. Seagrass beds are often a relatively small section of this coastal zone, but have a potentially much larger ecological influence than suggested by their surface area. Using stable isotopes as tracers of oceanic, terrestrial, mangrove and seagrass sources, we investigated the origin of particulate organic matter in nine mangrove bays around the island of Phuket (Thailand. We used a linear mixing model based on bulk organic carbon, total nitrogen and δ13C and δ15N and found that oceanic sources dominated suspended particulate organic matter samples along the mangrove-seagrass-ocean gradient. Sediment trap samples showed contributions from four sources oceanic, mangrove forest/terrestrial and seagrass beds where oceanic had the strongest contribution and seagrass beds the smallest. Based on ecosystem area, however, the contribution of suspended particulate organic matter derived from seagrass beds was disproportionally high, relative to the entire area occupied by mangrove forests, the catchment area (terrestrial and seagrass beds. The contribution from mangrove forests was approximately equal to their surface area, whereas terrestrial contributions to suspended organic matter under contributed compared to their relative catchment area. Interestingly, mangrove forest contribution at 0 m on the transects showed a positive relationship with the exposed frontal width of the mangrove, indicating that mangrove forest exposure to hydrodynamic energy may be a controlling factor in mangrove outwelling. However we found no relationship between seagrass bed contribution and any physical factors, which we measured. Our results indicate that although seagrass beds occupy a relatively small area of the coastal zone, their role in the export of organic matter is disproportional and

  14. Tiny is mighty: seagrass beds have a large role in the export of organic material in the tropical coastal zone.

    Science.gov (United States)

    Gillis, Lucy G; Ziegler, Alan D; van Oevelen, Dick; Cathalot, Cecile; Herman, Peter M J; Wolters, Jan W; Bouma, Tjeerd J

    2014-01-01

    Ecosystems in the tropical coastal zone exchange particulate organic matter (POM) with adjacent systems, but differences in this function among ecosystems remain poorly quantified. Seagrass beds are often a relatively small section of this coastal zone, but have a potentially much larger ecological influence than suggested by their surface area. Using stable isotopes as tracers of oceanic, terrestrial, mangrove and seagrass sources, we investigated the origin of particulate organic matter in nine mangrove bays around the island of Phuket (Thailand). We used a linear mixing model based on bulk organic carbon, total nitrogen and δ13C and δ15N and found that oceanic sources dominated suspended particulate organic matter samples along the mangrove-seagrass-ocean gradient. Sediment trap samples showed contributions from four sources oceanic, mangrove forest/terrestrial and seagrass beds where oceanic had the strongest contribution and seagrass beds the smallest. Based on ecosystem area, however, the contribution of suspended particulate organic matter derived from seagrass beds was disproportionally high, relative to the entire area occupied by mangrove forests, the catchment area (terrestrial) and seagrass beds. The contribution from mangrove forests was approximately equal to their surface area, whereas terrestrial contributions to suspended organic matter under contributed compared to their relative catchment area. Interestingly, mangrove forest contribution at 0 m on the transects showed a positive relationship with the exposed frontal width of the mangrove, indicating that mangrove forest exposure to hydrodynamic energy may be a controlling factor in mangrove outwelling. However we found no relationship between seagrass bed contribution and any physical factors, which we measured. Our results indicate that although seagrass beds occupy a relatively small area of the coastal zone, their role in the export of organic matter is disproportional and should be

  15. Wave breaking in the surf zone and deep-water in a non-hydrostatic RANS model. Part 2: Turbulence and mean circulation

    Science.gov (United States)

    Derakhti, Morteza; Kirby, James T.; Shi, Fengyan; Ma, Gangfeng

    2016-11-01

    Field-scale modeling of wave-breaking-induced turbulence and mean circulation is still challenging. Although Boussinesq-type models have been successfully used to study field-scale wave transformation and wave-breaking-driven circulation, they cannot provide turbulence or the vertical structure of the velocity field. In addition, the applicability of such models is limited to shallow water. In Part 1 (Derakhti et al., 2016b) of this study, we showed that the non-hydrostatic σ-coordinate RANS model NHWAVE, as described by Derakhti et al. (2016a), accurately predicts organized wave motions and total wave-breaking-induced energy dissipation from deep-water up to the swash zone using a few vertical σ-layers. In this paper, our goal is to examine what level of detail of wave-breaking-induced turbulence and mean circulation, both in depth- and steepness-limited breaking waves, can be reproduced by NHWAVE. Further, effects of modeled turbulent eddy viscosity on the predicted time-averaged velocity distribution is discussed. We establish that NHWAVE is capable of predicting the structure of the mean velocity and vorticity fields including large-scale breaking-induced coherent vortices in deep-water breaking events; where the absence of turbulence-induced eddy viscosity results in the overprediction of the velocity and vorticity field in the breaking region. We show that NHWAVE reduces the required CPU time up to two orders of magnitude in comparison with a comparable VOF-based simulation.

  16. Transformation of Waves Across the Surf Zone.

    Science.gov (United States)

    1981-03-01

    by -2 2 -2p(H) = 2H/Hrs exp(-H /Hrs) (1) where iH is the rms wave height.rms Using pressure records in the Gulf of Mexico , Longuet- Higgins (1975...Spring, MD 20910 21. Director 2 Instituto Oceanografico de la Armada Guayaquil, Ecuador 22. Director de Educacion de la Armada Comandancia General de

  17. Suspended Sediments Measured in the Surf Zone.

    Science.gov (United States)

    1977-09-01

    described by Komar and Inman (1970). Sus- pended sediments were measured in situ by swimmers using a mechanical water sampling device which...PEÜüENC’-1 fH* 39 imt ^^m "/• ffr- 7 If) \\ h A /’ kl v \\ n/\\ i > ^ U, Vectra of onshore-offshore flow vs. nephelcmeter

  18. Smooth Particle Hydrodynamics for Surf Zone Waves

    Science.gov (United States)

    2009-01-01

    2010.) The GPU-SPHysics code, initiated by Dr. Alexis Hérault at the Istituto Nazionale di Geofisica e Vulcanologia in Sicily, has been applied to... Geofisica e Vulcanologia, sezione di Catania, for the development of GPU-SPHysics. Drs. Hérault and Bilotta were in residence at JHU during January of

  19. Ecomorphology and food habits of teleost fishes Trachinotus carolinus (Teleostei: Carangidae and Menticirrhus littoralis (Teleostei: Sciaenidae, inhabiting the surf zone off Niterói, Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Luana Prestrelo Palmeira

    2010-01-01

    Full Text Available The ecomorphology and food habits of juvenile Trachinotus carolinus and Menticirrhus littoralis caught in the surf zone of sandy beaches in Niterói, RJ, were investigated between July 2006 and May 2007. These fish species differ morphologically, but present similarities in their diet composition suggest some slight overlapping in their diet. The importance of food items was assessed using Kawakami and Vazzoler's feeding index. Morphometric variables were recorded to correlate with the diet composition of the different size classes for each species. A total of 210 fishes (Trachinotus carolinus - 122, Menticirrhus littoralis - 88, ranging between 24.2 mm and 112 mm total length, were analyzed, but the stomachs of only 84.8% of them contained food. Trachinotus carolinus presented mysids, Polychaetes and Emerita spp. as the predominant items in their diet. Formicidae and Isopoda were the most important items for class I individuals, whereas mysids and Emerita spp. were important for classes II and III. Class I individuals also showed smaller sized prey (amphipods and isopods and clupeid fish larvae in their diet. Emerita spp. dominated the food items of Menticirrhus littoralis regardless of the size class. Polychaetes, the second most important item was better represented in class sizes II and III. The main morphometric variable correlated with such differences included mouth position and diameter of the eye.A ecomorfologia e os hábitos alimentares de juvenis de Trachinotus carolinus e Menticirrhus littoralis capturados na zona de arrebentação de praias arenosas em Niterói, RJ, foram investigados entre julho de 2006 e Maio de 2007. Ambas as espécies diferem morfologicamente, mas apresentam semelhanças em sua dieta, sugerindo uma possível sobreposição alimentar. A importância dos itens alimentares foi avaliada utilizando o índice alimentar de Kawakami e Vazzoler. Variáveis morfométricas foram correlacionadas à dieta observada para

  20. Resolving Implementation Ambiguity and Improving SURF

    CERN Document Server

    Abeles, Peter

    2012-01-01

    Speeded Up Robust Features (SURF) has emerged as one of the more popular feature descriptors and detectors in recent years. Due to SURF's complexity and ambiguities found in its description, performance and algorithmic details between these implementations vary widely. To resolve these ambiguities a set of general techniques for feature stability is defined based on the smoothness rule and applied to SURF. Additional new improvements to SURF are proposed for speed and stability. To illustrate the importance of these implementation details, a performance study of popular SURF implementations is done. By utilizing all the suggested improvements it is possible to create a SURF implementation which is several times faster and/or more stable.

  1. Sand, sea and surf: segmenting South African surfers | Kruger ...

    African Journals Online (AJOL)

    Sand, sea and surf: segmenting South African surfers. ... and that they differ according to their socio-demographic characteristics, surfing behaviour and motives. The results of ... Keywords: Market segmentation; Surfing; South Africa; Typology ...

  2. Performance Analysis of Surfing: A Review.

    Science.gov (United States)

    Farley, Oliver R L; Abbiss, Chris R; Sheppard, Jeremy M

    2017-01-01

    Farley, ORL, Abbiss, CR, and Sheppard, JM. Performance Analysis of Surfing: A Review. J Strength Cond Res 31(1): 260-271, 2017-Despite the increased professionalism and substantial growth of surfing worldwide, there is limited information available to practitioners and coaches in terms of key performance analytics that are common in other field-based sports. Indeed, research analyzing surfing performance is limited to a few studies examining male surfers' heart rates, surfing activities through time-motion analysis (TMA) using video recordings and Global Positioning Satellite (GPS) data during competition and recreational surfing. These studies have indicated that specific activities undertaken during surfing are unique with a variety of activities (i.e., paddling, resting, wave riding, breath holding, and recovery of surfboard in the surf). Furthermore, environmental and wave conditions also seem to influence the physical demands of competition surfing. It is due to these demands that surfers are required to have a high cardiorespiratory fitness, high muscular endurance, and considerable strength and anaerobic power, particular within the upper torso. By exploring various methods of performance analysis used within other sports, it is possible to improve our understanding of surfing demands. In so doing this will assist in the development of protocols and strategies to assess physiological characteristics of surfers, monitor athlete performance, improve training prescription, and identify talent. Therefore, this review explores the current literature to provide insights into methodological protocols, delimitations of research into athlete analysis and an overview of surfing dynamics. Specifically, this review will describe and review the use of TMA, GPS, and other technologies (i.e., HR) that are used in external and internal load monitoring as they pertain to surfing.

  3. Mathieu Moonshine and Symmetry Surfing

    CERN Document Server

    Gaberdiel, Matthias R; Paul, Hynek

    2016-01-01

    Mathieu Moonshine, the observation that the Fourier coefficients of the elliptic genus on K3 can be interpreted as dimensions of representations of the Mathieu group M24, has been proven abstractly, but a conceptual understanding in terms of a representation of the Mathieu group on the BPS states, is missing. Some time ago, Taormina and Wendland showed that such an action can be naturally defined on the lowest non-trivial BPS states, using the idea of `symmetry surfing', i.e., by combining the symmetries of different K3 sigma models. In this paper we find non-trivial evidence that this construction can be generalized to all BPS states.

  4. Shock Detector for SURF model

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-11

    SURF and its extension SURFplus are reactive burn models aimed at shock initiation and propagation of detonation waves in high explosives. A distinctive feature of these models is that the burn rate depends on the lead shock pressure. A key part of the models is an algorithm to detect the lead shock. Typically, shock capturing hydro algorithms have small oscillations behind a shock. Here we investigate how well the shock detection algorithm works for a nearly steady propagating detonation wave in one-dimension using the Eulerian xRage code.

  5. Shock Detector for SURF model

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-11

    SURF and its extension SURFplus are reactive burn models aimed at shock initiation and propagation of detonation waves in high explosives. A distinctive feature of these models is that the burn rate depends on the lead shock pressure. A key part of the models is an algorithm to detect the lead shock. Typically, shock capturing hydro algorithms have small oscillations behind a shock. Here we investigate how well the shock detection algorithm works for a nearly steady propagating detonation wave in one-dimension using the Eulerian xRage code.

  6. Towards designing miniature surfing robots

    Science.gov (United States)

    Jafari Kang, Saeed; Vandadi, Vahid; Masoud, Hassan

    2016-11-01

    We theoretically study the surfing motion of chemically and thermally active particles located at a flat liquid-gas interface that sits above a liquid layer of finite depth. The particles' activity creates and maintains a surface tension gradient resulting in the auto-surfing. It is intuitively perceived that Marangoni surfers propel towards the direction with a higher surface tension. Remarkably, we find that the surfers may propel in the lower surface tension direction depending on their geometry and proximity to the bottom of the liquid layer. In particular, our analytical calculations for Stokes flow and diffusion-dominated scalar (i.e. chemical concentration and temperature) fields indicate that spherical particles undergo reverse Marangoni propulsion under confinement whereas disk-shaped surfers always move in the expected direction. We extend our results by proposing an approximate formula for the propulsion speed of oblate spheroidal particles based on the speeds of spheres and disks. Overall, our findings pave the way for designing microsurfers capable of operating in bounded environments.

  7. Bed slope effects on turbulent wave boundary layers: 2. Comparison with skewness, asymmetry, and other effects

    DEFF Research Database (Denmark)

    Fuhrman, David R.; Fredsøe, Jørgen; Sumer, B. Mutlu

    2009-01-01

    contributions believed to play a prominent role in cross-shore boundary layer and sediment transport processes: (1) converging-diverging effects from bed slope, (2) wave skewness, (3) wave asymmetry, and (4) waves combined with superposed negative currents (intended to loosely represent, for example, return...... currents or undertow). The effects from each of the four components are isolated and quantified using a standard set of bed shear stress quantities, allowing their easy comparison. For conditions representing large shallow-water waves on steep slopes, the results suggest that converging-diverging effects...... from beach slope may make a significant onshore bed load contribution. Generally, however, the results suggest wave skewness (in addition to conventional steady streaming) as the most important onshore contribution outside the surf zone. Streaming induced within the wave boundary layer is also...

  8. Numerical modeling of the vertical hydrofluorination zone in the moving bed furnace for the production of UF{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Jourde, J.; Patisson, F.; Ablitzer, D. [Ecole des Mines, Nancy (France). Lab. de Science et Genie des Materiaux Metalliques; Houzelot, J.L. [Ecole des Mines, Nancy (France). Lab. des Sciences du Genie Chimique

    1996-12-31

    Uranium tetrafluoride UF{sub 4} is produced in the moving bed furnace, a reactor in which solid- and gas counterflow. Due to the highly exothermic nature of the chemical reactions involved, the-reactor operation requires a careful temperature control. To provide operators with an appropriate tool for the predictive simulation, optimization and control of the process an overall numerical model of the furnace has been developed. This article describes the part of the model concerning the vertical hydrofluorination zone. The differential equations representing the mass, energy and momentum balances are solved using the finite volume method. The physicochemical parameters necessary for the calculation are detailed. The rate of the main reaction, the hydrofluorination of UO{sub 2}, has been determined with the aid of a specific kinetic model. The computed parameters, namely the temperature and solid and gas compositions, are visualized in the form of isovalue maps. The initial results reveal the influence of a thermodynamic limitation of the reaction at temperatures higher than 650 K. (author)

  9. Characterization of SURF-1 expression and Surf-1p function in normal and disease conditions.

    Science.gov (United States)

    Tiranti, V; Galimberti, C; Nijtmans, L; Bovolenta, S; Perini, M P; Zeviani, M

    1999-12-01

    Loss-of-function mutations of the SURF-1 gene have been associated with Leigh syndrome with cytochrome c oxidase (COX) deficiency. Mature Surf-1 protein (Surf-1p) is a 30 kDa hydrophobic polypeptide whose function is still unknown. Using antibodies against a recombinant, hemagglutinin-tagged Surf-1p, we have demonstrated that this protein is imported into mitochondria as a larger precursor, which is then processed into the mature product by cleaving off an N-terminal leader polypeptide of approximately 40 amino acids. By using western blot analysis with specific antibodies, we showed that Surf-1p is localized in and tightly bound to the mitochondrial inner membrane. The same analysis revealed that no protein is present in cell lines harboring loss-of-function mutations of SURF-1, regardless of their type and position. Northern blot analysis showed the virtual absence of specific SURF-1 transcripts in different mutant cell lines. This result suggests that several mutations of SURF-1 are associated with severe mRNA instability. To understand better whether and which domains of the protein are essential for function, we generated several constructs with truncated or partially deleted SURF-1 cDNAs. None of these constructs, expressed into Surf-1p null mutant cells, were able to rescue the COX phenotype, suggesting that different regions of the protein are all essential for function. Finally, experiments based on blue native two-dimensional gel electrophoresis indicated that assembly of COX in Surf-1p null mutants is blocked at an early step, most likely before the incorporation of subunit II in the nascent intermediates composed of subunit I alone or subunit I plus subunit IV. However, detection of residual amounts of fully assembled complex suggests a certain degree of redundancy of this system.

  10. Composition, Shell Strength, and Metabolizable Energy of Mulinia lateralis and Ischadium recurvum as Food for Wintering Surf Scoters (Melanitta perspicillata.

    Directory of Open Access Journals (Sweden)

    Alicia M Wells-Berlin

    Full Text Available Decline in surf scoter (Melanitta perspicillata waterfowl populations wintering in the Chesapeake Bay has been associated with changes in the availability of benthic bivalves. The Bay has become more eutrophic, causing changes in the benthos available to surf scoters. The subsequent decline in oyster beds (Crassostrea virginica has reduced the hard substrate needed by the hooked mussel (Ischadium recurvum, one of the primary prey items for surf scoters, causing the surf scoter to switch to a more opportune species, the dwarf surfclam (Mulinia lateralis. The composition (macronutrients, minerals, and amino acids, shell strength (N, and metabolizable energy (kJ of these prey items were quantified to determine the relative foraging values for wintering scoters. Pooled samples of each prey item were analyzed to determine composition. Shell strength (N was measured using a shell crack compression test. Total collection digestibility trials were conducted on eight captive surf scoters. For the prey size range commonly consumed by surf scoters (6-12 mm for M. lateralis and 18-24 mm for I. recurvum, I. recurvum contained higher ash, protein, lipid, and energy per individual organism than M. lateralis. I. recurvum required significantly greater force to crack the shell relative to M. lateralis. No difference in metabolized energy was observed for these prey items in wintering surf scoters, despite I. recurvum's higher ash content and harder shell than M. lateralis. Therefore, wintering surf scoters were able to obtain the same amount of energy from each prey item, implying that they can sustain themselves if forced to switch prey.

  11. Composition, shell strength, and metabolizable energy of Mulinia lateralis and Ischadium recurvum as food for wintering surf scoters (Melanitta perspicillata)

    Science.gov (United States)

    Berlin, Alicia; Perry, Matthew; Kohn, R.A.; Paynter, K.T.; Ottinger, Mary Ann

    2015-01-01

    Decline in surf scoter (Melanitta perspicillata) waterfowl populations wintering in the Chesapeake Bay has been associated with changes in the availability of benthic bivalves. The Bay has become more eutrophic, causing changes in the benthos available to surf scoters. The subsequent decline in oyster beds (Crassostrea virginica) has reduced the hard substrate needed by the hooked mussel (Ischadium recurvum), one of the primary prey items for surf scoters, causing the surf scoter to switch to a more opportune species, the dwarf surfclam (Mulinia lateralis). The composition (macronutrients, minerals, and amino acids), shell strength (N), and metabolizable energy (kJ) of these prey items were quantified to determine the relative foraging values for wintering scoters. Pooled samples of each prey item were analyzed to determine composition. Shell strength (N) was measured using a shell crack compression test. Total collection digestibility trials were conducted on eight captive surf scoters. For the prey size range commonly consumed by surf scoters (6-12 mm for M. lateralis and 18-24 mm for I. recurvum), I. recurvum contained higher ash, protein, lipid, and energy per individual organism than M. lateralis. I. recurvum required significantly greater force to crack the shell relative to M. lateralis. No difference in metabolized energy was observed for these prey items in wintering surf scoters, despite I. recurvum's higher ash content and harder shell than M. lateralis. Therefore, wintering surf scoters were able to obtain the same amount of energy from each prey item, implying that they can sustain themselves if forced to switch prey.

  12. A new statistical model of wave heights based on the concept of wave breaking critical zone

    Institute of Scientific and Technical Information of China (English)

    YANG Jiaxuan; LI Xunqiang; ZHU Shouxian; ZHANG Wenjing; WANG Lei

    2015-01-01

    When waves propagate from deep water to shallow water, wave heights and steepness increase and then waves roll back and break. This phenomenon is called surf. Currently, the present statistical calculation model of surf was derived mainly from the wave energy conservation equation and the linear wave dispersion relation, but it cannot reflect accurately the process which is a rapid increasing in wave height near the broken point. So, the concept of a surf breaking critical zone is presented. And the nearshore is divided as deep water zone, shallow water zone, surf breaking critical zone and after breaking zone. Besides, the calculation formula for the height of the surf breaking critical zone has founded based on flume experiments, thereby a new statistical calculation model on the surf has been established. Using the new model, the calculation error of wave height maximum is reduced from 17.62% to 6.43%.

  13. Application of in-situ passive samplers for the investigation of the impacts of vegetated river beds on mineral N concentration gradients in the hyporheic zone

    Science.gov (United States)

    Ullah, S.; Zhang, H.; Heathwaite, L.; Lansdown, K.; Heppell, K.; Binley, A.; Trimmer, M.; Keenan, P.

    2010-12-01

    Conventional pore water sampling techniques have only a limitated capability to provide fine scale (cm or mm) depth resolution of chemical species associated with a ‘hotspot’ or a ‘hot event' in riverine hyporheic zones. To overcome this limitation, in-situ passive samplers (diffusive equilibrium in thin films-DET) were deployed in hyporheic sediments (0-30 cm depth) both under vegetated beds (dominated by Phragmites, spp.) and non-vegetated beds of a groundwater-fed river in Cumbria, UK. The riverbed environment consisted of coarse gravels and sandstone, requiring development of a new methodology for inserting the DET probes. The objectives were two-fold; 1) to explore the feasibility of DET deployment in hyporheic sediments dominated by gravels, and 2) to assess the impacts of vegetated beds on mineral N concentration gradients (cm scale resolution) to those under non-vegetated beds of the riverbed. The challenge of deploying DET in gravel bed sediments was met. Resulting information on fine scale gradients of mineral N and other redox sensitive species can improve our understanding of the dynamics of hyporheic mineral N species. According to the results, hyporheic sediments under vegetation exhibited significantly lower nitrate concentration gradients compared to non-vegetated hyporheic sediments. A dense piezometer network installed at the site showed that both locations possessed an upwelling potential at the time of DET deployment, and the amount of dissolved organic C was high in the hyporheic under reeds relative to the non-vegetated zones. These preliminary results suggest that vegetated beds in rivers could be effective in removing NO3 through denitrification and plant uptake besides rendering other ecosystem services such as habitat provision.

  14. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

    OpenAIRE

    Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander; King, Wayne E.

    2015-01-01

    This study demonstrates the significant effect of the recoil pressure and Marangoni convection in laser powder bed fusion (L-PBF) of 316L stainless steel. A three-dimensional high fidelity powder-scale model reveals how the strong dynamical melt flow generates pore defects, material spattering (sparking), and denudation zones. The melt track is divided into three sections: a topological depression, a transition and a tail region, each being the location of specific physical effects. The inclu...

  15. Numerical modeling of surf beat generated by moving breakpoint

    Institute of Scientific and Technical Information of China (English)

    DONG GuoHai; MA XiaoZhou; TENG Bin

    2009-01-01

    As an important hydrodynamic phenomenon in the nearshore zone, the cross-shore surf beat is nu-merically studied in this paper with a fully nonlinear Boussinesq-type model, which resolves the pri-mary wave motion as well as the long waves. Compared with the classical Boussinesq equations, the equations adopted here allow for improved linear dispersion characteristics. Wave breaking and run-up in the swash zone are included in the numerical model. Mutual interactions between short waves and long waves are inherent in the model. The numerical study of long waves is based on bichromatic wave groups with a wide range of mean frequencies, group frequencies and modulation rates. The cross-shore variation in the amplitudes of short waves and long waves is investigated. The model results are compared with laboratory experiments from the literature and good agreement is found.

  16. Numerical modeling of surf beat generated by moving breakpoint

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    As an important hydrodynamic phenomenon in the nearshore zone, the cross-shore surf beat is numerically studied in this paper with a fully nonlinear Boussinesq-type model, which resolves the primary wave motion as well as the long waves. Compared with the classical Boussinesq equations, the equations adopted here allow for improved linear dispersion characteristics. Wave breaking and run-up in the swash zone are included in the numerical model. Mutual interactions between short waves and long waves are inherent in the model. The numerical study of long waves is based on bichromatic wave groups with a wide range of mean frequencies, group frequencies and modulation rates. The cross-shore variation in the amplitudes of short waves and long waves is investigated. The model results are compared with laboratory experiments from the literature and good agreement is found.

  17. Experimental Investigation of Shock Wave Surfing

    CERN Document Server

    Parziale, N J; Hornung, H G; Shepherd, J E

    2010-01-01

    Shock wave surfing is investigated experimentally in GALCIT's Mach 4.0 Ludwieg Tube. Shock wave surfing occurs when a secondary free-body follows the bow shock formed by a primary free-body; an example of shock wave surfing occurs during meteorite breakup. The free-bodies in the current investigation are nylon spheres. During each run in the Ludwieg tube a high speed camera is used to capture a series of schlieren images; edge tracking software is used to measure the position of each sphere. Velocity and acceleration are had from processing the position data. The radius ratio and initial orientation of the two spheres are varied in the test matrix. The variation of sphere radius ratio and initial angle between the centers of gravity are shown to have a significant effect on the dynamics of the system.

  18. 77 FR 9850 - Safety Zone; 2012 Mavericks Invitational, Half Moon Bay, CA

    Science.gov (United States)

    2012-02-21

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA08 Safety Zone; 2012 Mavericks Invitational, Half Moon Bay... temporary safety zone in support of the Mavericks Surf Competition. This temporary safety zone will... process would be completed. Because of the dangers posed by the surf conditions during the 2012 Mavericks...

  19. Women's Recreational Surfing: A Patronising Experience

    Science.gov (United States)

    Olive, Rebecca; McCuaig, Louise; Phillips, Murray G.

    2015-01-01

    Research analysing the operation of power within sport and physical activity has exposed the marginalisation and exclusion of women's sport in explicit and institutionalised ways. However, for women in recreational and alternative physical activities like surfing, sporting experiences lie outside institutionalised structures, thus requiring…

  20. An Analysis of the SURF Method

    Directory of Open Access Journals (Sweden)

    Edouard Oyallon

    2015-07-01

    Full Text Available The SURF method (Speeded Up Robust Features is a fast and robust algorithm for local, similarity invariant representation and comparison of images. Similarly to many other local descriptor-based approaches, interest points of a given image are defined as salient features from a scale-invariant representation. Such a multiple-scale analysis is provided by the convolution of the initial image with discrete kernels at several scales (box filters. The second step consists in building orientation invariant descriptors, by using local gradient statistics (intensity and orientation. The main interest of the SURF approach lies in its fast computation of operators using box filters, thus enabling real-time applications such as tracking and object recognition. The SURF framework described in this paper is based on the PhD thesis of H. Bay [ETH Zurich, 2009], and more specifically on the paper co-written by H. Bay, A. Ess, T. Tuytelaars and L. Van Gool [Computer Vision and Image Understanding, 110 (2008, pp. 346–359]. An implementation is proposed and used to illustrate the approach for image matching. A short comparison with a state-of-the-art approach is also presented, the SIFT algorithm of D. Lowe [International Journal of Computer Vision, 60 (2004, pp. 91–110], with which SURF shares a lot in common.

  1. Influence of abiotic factors on spatiotemporal patterns of larval fish assemblages in the surf zones of the Yangtze River estuary and Hangzhou Bay%长江口和杭州湾碎波带仔稚鱼群聚时空分布特征及相关环境因子分析

    Institute of Scientific and Technical Information of China (English)

    陈渊戈; 毛成责; 林楠; 钟俊生; 徐兆礼

    2015-01-01

    2009年8月至2010年8月每月大潮前后在长江口和杭州湾碎波带的12个站点采集仔稚鱼,共采集到仔稚鱼14907尾,隶属24科74种,主要优势种有刀鲚(Coilia nasus,47.84%)、普氏缰虾虎鱼(Amoya pflaumii,11.58%)、属(Hemiculter spp.,9.12%)、飘鱼属(Pseudolaubuca spp.,6.29%)、多鳞四指马鲅(Eleutheronema rhadinum,5.62%)。分析了碎波带仔稚鱼群聚的时空分布特征与水温、盐度、底质、地形等环境因子的关系。聚类和排序的结果显示,全年仔稚鱼群聚在时间序列上可分为4组,各组间存在明显的种类更替,出现的主要优势种分别是12月–翌年4月的乔氏新银鱼(Neosalanx jordani),5月的中国大银鱼(Protosalanx chinensis)、中国花鲈(Lateolabrax maculatus),6月–9月的刀鲚、普氏缰虾虎鱼、属、飘鱼属、多鳞四指马鲅,以及10月、11月的有明银鱼(Salanx ariakensis)。在空间梯度上可分为长江口碎波带站点和杭州湾碎波带站点两组,两组间相异性贡献度最高的种类是刀鲚和普氏缰虾虎鱼(>10%),多个组内的独有种类显示出不同生态类型鱼类仔稚鱼对碎波带栖息地的生境选择分化。CCA 结果显示,所选的5个环境因子中只有水温和盐度对仔稚鱼群聚整体的时空分布有显著影响,但是对整个时空分布特征的解释度并不算高,意味着还存在其他重要的影响因素,可能包括饵料生物、径流等。对主要种类在单种的尺度上进行了丰度时空分布与环境因子的 GAM 曲线拟合,发现底质和地形对特定种类的仔稚鱼的分布有显著影响。地形开阔平坦、底质为沙质的站点仔稚鱼种类和丰度都相对较多,如优势种中的飘鱼属种类、多鳞四指马鲅、日本须鳎(Paraplagusia japonica)等都倾向选择栖息在开阔平坦的沙质底站点。%The surf zone is an important habitat for larval organisms; in particular, a large amount of research has de-monstrated the utility of

  2. Pd-Ag Membrane Coupled to a Two-Zone Fluidized Bed Reactor (TZFBR) for Propane Dehydrogenation on a Pt-Sn/MgAl2O4 Catalyst.

    Science.gov (United States)

    Medrano, José-Antonio; Julián, Ignacio; Herguido, Javier; Menéndez, Miguel

    2013-05-14

    Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR) provide an improvement in propane conversion by hydrogen removal from the reaction bed through the inorganic membrane in addition to in situ catalyst regeneration. Twofold process intensification is thereby achieved when compared to the use of traditional fluidized bed reactors (FBR), where coke formation and thermodynamic equilibrium represent important process limitations. Experiments were carried out at 500-575 °C and with catalyst mass to molar flow of fed propane ratios between 15.1 and 35.2 g min mmol-1, employing three different reactor configurations: FBR, TZFBR and TZFBR + Membrane (TZFBR + MB). The results in the FBR showed catalyst deactivation, which was faster at high temperatures. In contrast, by employing the TZFBR with the optimum regenerative agent flow (diluted oxygen), the process activity was sustained throughout the time on stream. The TZFBR + MB showed promising results in catalytic propane dehydrogenation, displacing the reaction towards higher propylene production and giving the best results among the different reactor configurations studied. Furthermore, the results obtained in this study were better than those reported on conventional reactors.

  3. Pd-Ag Membrane Coupled to a Two-Zone Fluidized Bed Reactor (TZFBR for Propane Dehydrogenation on a Pt-Sn/MgAl2O4 Catalyst

    Directory of Open Access Journals (Sweden)

    Miguel Menéndez

    2013-05-01

    Full Text Available Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR provide an improvement in propane conversion by hydrogen removal from the reaction bed through the inorganic membrane in addition to in situ catalyst regeneration. Twofold process intensification is thereby achieved when compared to the use of traditional fluidized bed reactors (FBR, where coke formation and thermodynamic equilibrium represent important process limitations. Experiments were carried out at 500–575 °C and with catalyst mass to molar flow of fed propane ratios between 15.1 and 35.2 g min mmol−1, employing three different reactor configurations: FBR, TZFBR and TZFBR + Membrane (TZFBR + MB. The results in the FBR showed catalyst deactivation, which was faster at high temperatures. In contrast, by employing the TZFBR with the optimum regenerative agent flow (diluted oxygen, the process activity was sustained throughout the time on stream. The TZFBR + MB showed promising results in catalytic propane dehydrogenation, displacing the reaction towards higher propylene production and giving the best results among the different reactor configurations studied. Furthermore, the results obtained in this study were better than those reported on conventional reactors.

  4. A design and study of the effects of selectivity on binary separation in a four-zone simulated moving bed for systems with linear isotherms

    Directory of Open Access Journals (Sweden)

    M.A. Cremasco

    2003-06-01

    Full Text Available The simulated moving bed (SMB is potentially an economical method for the separation and purification of natural products because it is a continuous processes and can achieve higher productivity, higher product recovery, and higher purity than batch chromatographic processes. Despite the advantages of SMB, one of the challenges is to specify its zone flow rates and switching time. In this case it is possible to use the standing wave analysis. In this method, in a binary system, when certain concentration waves are confined to specific zones, high product purity and yield can be assured. Appropriate zone flow rates, zone lengths and step time are chosen to achieve standing waves. In this study the effects of selectivity on yield, throughput, solvent consumption, port switching time, and product purity for a binary system are analyzed. The results show that for a given selectivity the maximum throughput decreases with increasing yield, while solvent consumption and port switching time increase with increasing yield. To achieve the same purity and yield, a system with higher selectivity has a higher throughput and lower solvent consumption.

  5. Enhanced Approximated SURF Model For Object Recognition

    Directory of Open Access Journals (Sweden)

    S. Sangeetha

    2014-02-01

    Full Text Available Computer vision applications like camera calibration, 3D reconstruction, and object recognition and image registration are becoming widely popular now a day. In this paper an enhanced model for speeded up robust features (SURF is proposed by which the object recognition process will become three times faster than common SURF model The main idea is to use efficient data structures for both, the detector and the descriptor. The detection of interest regions is considerably speed-up by using an integral image for scale space computation. The descriptor which is based on orientation histograms is accelerated by the use of an integral orientation histogram. We present an analysis of the computational costs comparing both parts of our approach to the conventional method. Extensive experiments show a speed-up by a factor of eight while the matching and repeatability performance is decreased only slightly.

  6. Development of a non-triangular separation region for improving the performance of a three-zone simulated moving bed chromatography for binary separation with linear isotherms.

    Science.gov (United States)

    Mun, Sungyong

    2012-09-21

    For a three-zone simulated moving bed (SMB) chromatography with linear isotherms, the feasible set of operating parameters for complete separation is known to exist within a triangular region of the triangle theory that is formed in the operating parameter plane spanned by the flow-rate-ratios in the separation zones (II and III), which are commonly denoted as m(2) and m(3). Such an operating region for complete separation region, however, has been established only in the first quadrant (m(2), m(3)) plane, where m(2)>0 and m(3)>0, until now. In this study, a new complete-separation region was developed in the third quadrant (m(2), m(3)) plane, where m(2)<0 and m(3)<0, regarding a three-zone SMB process for the first time. The results showed that the new separation region created in the third quadrant (m(2), m(3)) plane took a non-triangular shape. The operating parameters within such a non-triangular separation region were capable of guaranteeing complete separation for an ideal system with no mass-transfer effects. For a non-ideal system with considerable mass-transfer effects, the operating parameters that were selected with a sufficient margin from the boundaries of the non-triangular separation region led to high purities. One of the noteworthy features in the pattern of solute migration for such case was that both low-affinity and high-affinity solutes reached their corresponding product ports after taking a turn around the SMB bed once. Finally, it was confirmed from the results of SMB optimization based on genetic algorithm and detailed model that the operating parameters in the third quadrant (m(2), m(3)) plane, if chosen properly, could ensure higher purities or higher throughput than the optimal operating parameters in the first quadrant (m(2), m(3)) plane. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Evidence of the dominance of higher-mode surface waves in the lake-bed zone of the Valley of Mexico

    Science.gov (United States)

    Shapiro, N. M.; Singh, S. K.; Almora, D.; Ayala, M.

    2001-12-01

    We compare ground motions recorded at the surface and in boreholes at five different locations of the lake-bed zone of the Valley of Mexico with theoretical dispersion curves and eigenfunctions calculated for the first two modes of Rayleigh and Love waves. We find that (1) the maximum in the horizontal-to-vertical displacement ratio, which occurs at the dominant frequency of the site (0.4Hz), corresponds to the higher mode rather than to the fundamental mode of the Rayleigh waves, (2) borehole records at depths from 0 to 100m show that the normalized vertical displacement does not decrease rapidly below the superficial clay layer, as should be the case for the fundamental mode, but remains ~ 0.8, and (3) the measured phase velocity at a period of about 2.5s (2.0+/-0.5kms-1 ) is too fast for the fundamental mode predicted for the known crustal velocity structure. These observations lead us to conclude that the wavefield in the lake-bed zone in Mexico City is dominated by higher-mode surface waves. This provides a plausible explanation for the long duration of the coda in the lake-bed zone. Although shear wave Q is very small (10-20) in the clay layer, the higher modes of surface waves do not propagate in the superficial clay layer but in the underlying structure where Q -values are likely to be relatively high. Thus, while the clay layer plays the passive role of amplifying the ground motion, its contribution in damping out the motion is insignificant. The results have two important practical implications. (1) The strain estimate from recorded ground velocity differs significantly for the fundamental mode as compared to the higher-mode surface waves. (2) If the ground motion is dominated by the fundamental mode, then knowledge of the superficial layer and the velocity contrast with the underlying structure is sufficient for understanding and modelling of the ground motion. If, however, the higher-mode surface waves dominate, then a detailed knowledge of the deeper

  8. Fusulinoids from the Bashkirian-Moscovian transition beds of the Shahreza region in the Sanandaj-Sirjan Zone, Iran

    Science.gov (United States)

    Fassihi, Shirin; Sone, Masatoshi; Hairapetian, Vachik; Esfahani, Fariba Shirezadeh

    2016-12-01

    The presence of the Bashkirian-Moscovian (lower Pennsylvanian) sequence with mixed siliciclastics and fossil-rich carbonates has long been known from the Sanandaj-Sirjan Zone in Iran. However, except for a few studies, its biostratigraphy was not previously investigated in detail. A fusulinoid fauna is recovered from newly measured section, which we named the Asad Abad II section. It is located near the Shahreza town in the Sanandaj-Sirjan Zone. The most important fusulinoids of this assemblage are Aljutovella cf. aljutovica Rauser-Chernosouva, Tikhonovichiella tikhonovichi (Rauser-Chernosouva), and Profusulinella (Depratina) prisca (Deprat); they occur in association with species of Ozawainella, Staffellaeformis, and Pseudostaffella. This fauna overall represents a fauna of the latest Bashkirian-earliest Moscovian transition period in the Sanandaj-Sirjan Zone. This new fusulinoid fauna shares some common species with the concurrent faunas of the Alborz, East Iran, and Central Iran. Furthermore, it can be easily compared with those of the Russian Platform, Southern and Northern Urals, and Central Taurides (Turkey). The four species of the current fauna, namely Eostaffella compressa Brazhnikova, E. primitiva (Dutkevich), Pseudostaffella timanica Rauser-Chernosouva, and Profusulinella postpararhombiformis Dzhenchuraeva are reported from Iran for the first time. This study also presents the first occurrence of the genera Aljutovella and Tikhonovichiella in the Sanandaj-Sirjan Zone of Iran.

  9. Verification Test of the SURF and SURFplus Models in xRage: Part II

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-20

    The previous study used an underdriven detonation wave (steady ZND reaction zone profile followed by a scale invariant rarefaction wave) for PBX 9502 as a validation test of the implementation of the SURF and SURFplus models in the xRage code. Even with a fairly fine uniform mesh (12,800 cells for 100mm) the detonation wave profile had limited resolution due to the thin reaction zone width (0.18mm) for the fast SURF burn rate. Here we study the effect of finer resolution by comparing results of simulations with cell sizes of 8, 2 and 1 μm, which corresponds to 25, 100 and 200 points within the reaction zone. With finer resolution the lead shock pressure is closer to the von Neumann spike pressure, and there is less noise in the rarefaction wave due to fluctuations within the reaction zone. As a result the average error decreases. The pointwise error is still dominated by the smearing the pressure kink in the vicinity of the sonic point which occurs at the end of the reaction zone.

  10. Lateral Solids Mixing in the Dense Zone of a Circulating Fluidized Bed%循环流化床密相区内颗粒的横向扩散的研究

    Institute of Scientific and Technical Information of China (English)

    杨海瑞; 吕俊复; 刘青; 岳光溪

    2002-01-01

    Lateral solid mixing was investigated experimentally in the dense zone of a 900mm×100mm×5.2m rectangular circulating fluidized bed riser. Using heated tracer injection, the lateral solid dispersion was determined by measuring the temperature response at different lateral positions. Furthermore, a one-dimensional dispersion model, which describes the solid mixing in the dense zone, is presented. The experimental results were used to determine the lateral particle dispersion coefficient under various operating conditions. A correlation of dispersion coefficient with bed height, gas velocity, and particle size is also proposed.

  11. Breaker turbulence and sediment suspension in the surf zone

    DEFF Research Database (Denmark)

    Aagaard, Troels; Hughes, Michael G

    2010-01-01

    Field measurements of fluid velocities and suspended sediment concentrations were used to investigate the relative role of coherent vortices (related to wave breaking) in suspended sediment dynamics. The measurements were obtained from a barred (intermediate-type) beach and the instrument rig was...... between the horizontal fluid velocity and vortex-induced sediment suspension for each of the wave types, which may contribute to an explanation of net offshore and onshore sediment transport observed during episodes of beach erosion and recovery, respectively....

  12. Sensors and Algorithms for an Unmanned Surf-Zone Robot

    Science.gov (United States)

    2015-12-01

    AXV TESIS - COMPLEMENTARY FILTER TEST % File writen by Oscar Garcia 24/08/15 clear all clc clf imu = fopen(’imucomp2.txt’,’r’); 178...IMU data fusion and filtering using a first order Kalman filter. % AXV TESIS - IMU KALMAN FILTER TEST % File writen by Oscar Garcia 30/08/15...AXV_IMU_EKF.m It performs IMU data fusion and filtering using an extended Kalman filter. % AXV TESIS - IMU EKF TEST % File writen by Oscar Garcia 30/08

  13. Effects of Surf Zone Sediment Properties on Shock Wave Behavior

    Science.gov (United States)

    2016-06-07

    to be a first order factor. In addition, modeling predictions require the compressibility of the sediments at high and low pressures . The objective...sands in a test tank and initiate shock waves with a high energy laser system. The results will be used to validate numercal model predictions of

  14. Performance of a Tilt Current Meter in the Surf Zone

    DEFF Research Database (Denmark)

    Hansen, Asger Bendix; Carstensen, Stefan; Christensen, Drude Fritzbøger

    2017-01-01

    Tilt Current Meters (TCM’s) are relatively simple and inexpensive instruments for measuring currents in rivers and inthe sea. Their low cost and easy deployment means that a relatively large number of TCM’s can be deployed comparedto more conventional current meters such as Acoustic Doppler...

  15. Oscillatory infragravity wave contribution to surf zone sediment transport

    DEFF Research Database (Denmark)

    Aagaard, Troels; Greenwood, Brian

    2008-01-01

    can create a perturbation of the bar crest and/or generate a crescentic bar. These results provide support for the template model for crescentic bar formation, first proposed by Bowen and Inman (Bowen, A.J. and Inman, D.L., 1971. Edge waves and crescentic bars. J.Geophys.Res., 76, 8662-8670) although...

  16. User's Manual for Space Debris Surfaces (SD_SURF)

    Science.gov (United States)

    Elfer, N. C.

    1996-01-01

    A unique collection of computer codes, Space Debris Surfaces (SD_SURF), have been developed to assist in the design and analysis of space debris protection systems. SD_SURF calculates and summarizes a vehicle's vulnerability to space debris as a function of impact velocity and obliquity. An SD_SURF analysis will show which velocities and obliquities are the most probable to cause a penetration. This determination can help the analyst select a shield design which is best suited to the predominant penetration mechanism. The analysis also indicates the most suitable parameters for development or verification testing. The SD_SURF programs offer the option of either FORTRAN programs and Microsoft EXCEL spreadsheets and macros. The FORTRAN programs work with BUMPERII version 1.2a or 1.3 (Cosmic released). The EXCEL spreadsheets and macros can be used independently or with selected output from the SD_SURF FORTRAN programs.

  17. Temperature effects on nitrogen cycling and nitrate removal-production efficiency in bed form-induced hyporheic zones

    Science.gov (United States)

    Zheng, Lizhi; Cardenas, M. Bayani; Wang, Lichun

    2016-04-01

    Hyporheic flow in aquatic sediment controls solute and heat transport thereby mediating the fate of nutrients and contaminants, dissolved oxygen, and temperature in the hyporheic zone (HZ). We conducted a series of numerical simulations of hyporheic processes within a dune with different uniform temperatures, coupling turbulent open channel fluid flow, porous fluid flow, and reactive solute transport to study the temperature dependence of nitrogen source/sink functionality and its efficiency. Two cases were considered: a polluted stream and a pristine stream. Sensitivity analysis was performed to investigate the influence of stream water [NO3-]/[NH4+]. The simulations showed that in both cases warmer temperatures resulted in shallower denitrification zones and oxic-anoxic zone boundaries, but the trend of net denitrification rate and nitrate removal or production efficiency of the HZ for these two cases differed. For both cases, at high [NO3-]/[NH4+], the HZ functioned as a NO3- sink with the nitrate removal efficiency increasing with temperature. But at low [NO3-]/[NH4+] for the polluted stream, the HZ is a NO3- sink at low temperature but then switches to a NO3- source at warmer temperatures. For the pristine stream case, the HZ was always a NO3- source, with the NO3- production efficiency increasing monotonically with temperature. In addition, although the interfacial fluid flux expectedly increased with increasing temperature due to decreasing fluid viscosity, the total nitrate flux into the HZ did not follow this trend. This is because when HZ nitrification is high, uniformly elevated [NO3-] lowers dispersive fluxes into the HZ. We found that there are numerous confounding and interacting factors that combined to lead to the final temperature dependence of N transformation reaction rates. Although the temperature effect on the rate constant can be considered as the dominant factor, simply using the Arrhenius equation to predict the reaction rate would lead to

  18. 76 FR 8651 - Special Local Regulation; Mavericks Surf Competition, Half Moon Bay, CA

    Science.gov (United States)

    2011-02-15

    ... SECURITY Coast Guard 33 CFR Part 100 RIN 1625-AA08 Special Local Regulation; Mavericks Surf Competition... the Mavericks Surf Competition. This special local regulation is necessary to ensure the safety of... dangers posed by the surf conditions during the Mavericks Surf Competition, the special local regulation...

  19. Let’s Surf on The internet

    Institute of Scientific and Technical Information of China (English)

    李申禹

    1996-01-01

    在今日大学之校园内,电脑热正呈“奔腾”之势。李申禹所在的寝室购买了一台“合资”电脑,这为他们的学习另辟了一块天地,也为他们的生活着上了一点色彩,Let′s Surf on The Internet这篇习作标题潇洒,内容实在,既写出了作者漫步电脑书林的惊喜,又有对未来的展望——现在的年青人将携着the electronic books跨入新世纪。习作开首较好地运用了parllelism:结尾想象驰骋,并巧妙点题。本文Reviewed by Mr.John C.Green

  20. Palmprint Based Verification System Using SURF Features

    Science.gov (United States)

    Srinivas, Badrinath G.; Gupta, Phalguni

    This paper describes the design and development of a prototype of robust biometric system for verification. The system uses features extracted using Speeded Up Robust Features (SURF) operator of human hand. The hand image for features is acquired using a low cost scanner. The palmprint region extracted is robust to hand translation and rotation on the scanner. The system is tested on IITK database of 200 images and PolyU database of 7751 images. The system is found to be robust with respect to translation and rotation. It has FAR 0.02%, FRR 0.01% and accuracy of 99.98% and can be a suitable system for civilian applications and high-security environments.

  1. In-situ Observations of Swash-zone Flow Velocities and Sediment Transport on a Steep Beach

    Science.gov (United States)

    Chardon-Maldonado, P.; Puleo, J. A.; Figlus, J.

    2014-12-01

    A 45 m scaffolding frame containing an array of instruments was installed at South Bethany Beach, Delaware, to obtain in-situ measurements in the swash zone. Six cross-shore stations were established to simultaneously measure near-bed velocity profiles, sediment concentration and water level fluctuations on a steep beach. Measurements of swash-zone hydrodynamics and morphological change were collected from February 12 to 25, 2014, following a large Nor'easter storm with surf zone significant wave height exceeding 5 m. Swash-zone flow velocities (u,v,w) were measured at each cross-shore location using a Nortek Vectrino profiling velocimeter that measured a 30 mm velocity profile at 1 mm vertical increments at 100 Hz. These velocity profiles were used to quantify the vertical flow structure over the foreshore and estimate hydrodynamic parameters such as bed shear stress and turbulent kinetic energy dissipation. Sediment concentrations were measured using optical backscatter sensors (OBS) to obtain spatio-temporal measurements during both uprush and backwash phases of the swash cycle. Cross-shore sediment transport rates at each station were estimated by taking the product of cross-shore velocity and sediment concentration. Foreshore elevations were sampled every low tide using a Leica GPS system with RTK capability. Cross-shore sediment transport rates and gradients derived from the velocities and bed shear stress estimates will be related to the observed morphological change.

  2. Verification test of the SURF and SURFplus models in xRage

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-18

    As a verification test of the SURF and SURFplus models in the xRage code we use a propagating underdriven detonation wave in 1-D. This is about the only test cases for which an accurate solution can be determined based on the theoretical structure of the solution. The solution consists of a steady ZND reaction zone profile joined with a scale invariant rarefaction or Taylor wave and followed by a constant state. The end of the reaction profile and the head of the rarefaction coincide with the sonic CJ state of the detonation wave. The constant state is required to match a rigid wall boundary condition. For a test case, we use PBX 9502 with the same EOS and burn rate as previously used to test the shock detector algorithm utilized by the SURF model. The detonation wave is propagated for 10 μs (slightly under 80mm). As expected, the pointwise errors are largest in the neighborhood of discontinuities; pressure discontinuity at the lead shock front and pressure derivative discontinuities at the head and tail of the rarefaction. As a quantitative measure of the overall accuracy, the L2 norm of the difference of the numerical pressure and the exact solution is used. Results are presented for simulations using both a uniform grid and an adaptive grid that refines the reaction zone.

  3. Experimental evaluation of the effect of a modified port-location mode on the performance of a three-zone simulated moving-bed process for the separation of valine and isoleucine.

    Science.gov (United States)

    Park, Chanhun; Nam, Hee-Geun; Kim, Pung-Ho; Mun, Sungyong

    2014-06-01

    The removal of isoleucine from valine has been a key issue in the stage of valine crystallization, which is the final step in the valine production process in industry. To address this issue, a three-zone simulated moving-bed (SMB) process for the separation of valine and isoleucine has been developed previously. However, the previous process, which was based on a classical port-location mode, had some limitations in throughput and valine product concentration. In this study, a three-zone SMB process based on a modified port-location mode was applied to the separation of valine and isoleucine for the purpose of making a marked improvement in throughput and valine product concentration. Computer simulations and a lab-scale process experiment showed that the modified three-zone SMB for valine separation led to >65% higher throughput and >160% higher valine concentration compared to the previous three-zone SMB for the same separation.

  4. Verification Test of the SURF and SURFplus Models in xRage: Part III Affect of Mesh Alignment

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-15

    The previous studies used an underdriven detonation wave in 1-dimension (steady ZND reaction zone profile followed by a scale-invariant rarefaction wave) for PBX 9502 as a verification test of the implementation of the SURF and SURFplus models in the xRage code. Since the SURF rate is a function of the lead shock pressure, the question arises as to the effect on accuracy of variations in the detected shock pressure due to the alignment of the shock front with the mesh. To study the effect of mesh alignment we simulate a cylindrically diverging detonation wave using a planar 2-D mesh. The leading issue is the magnitude of azimuthal asymmetries in the numerical solution. The 2-D test case does not have an exact analytic solution. To quantify the accuracy, the 2-D solution along rays through the origin are compared to a highly resolved 1-D simulation in cylindrical geometry.

  5. SAR observations of coastal zone conditions

    Science.gov (United States)

    Meadows, G. A.; Kasischke, E. S.; Shuchman, R. A.

    1980-01-01

    Applications of Synthetic Aperture Radar (SAR) technology to the observation of coastal zones phenomena are detailed. The conditions observed include gravity wave detection, surf zone location, surface currents, and long-period 'surf beats'. Algorithms have been developed and successfully tested that determine significant wave and current parameters from the sea surface backscatter of microwave energy. Doppler information from the SAR optical correlator allows a rough estimation of near shore surface flow velocities that has been found in agreement with both theory and in situ observations as well. Seasat SAR data of the Scotland and North Carolina coasts are considered, as well as the results of bathymetric updating of coastal area charts.

  6. Bed Bugs

    Science.gov (United States)

    Prevent, identify, and treat bed bug infestations using EPA’s step-by-step guides, based on IPM principles. Find pesticides approved for bed bug control, check out the information clearinghouse, and dispel bed bug myths.

  7. Surfing the internet with a BCI mouse

    Science.gov (United States)

    Yu, Tianyou; Li, Yuanqing; Long, Jinyi; Gu, Zhenghui

    2012-06-01

    In this paper, we present a new web browser based on a two-dimensional (2D) brain-computer interface (BCI) mouse, where our major concern is the selection of an intended target in a multi-target web page. A real-world web page may contain tens or even hundreds of targets, including hyperlinks, input elements, buttons, etc. In this case, a target filter designed in our system can be used to exclude most of those targets of no interest. Specifically, the user filters the targets of no interest out by inputting keywords with a P300-based speller, while keeps those containing the keywords. Such filtering largely facilitates the target selection task based on our BCI mouse. When there are only several targets in a web page (either an original sparse page or a target-filtered page), the user moves the mouse toward the target of interest using his/her electroencephalographic signal. The horizontal movement and vertical movement are controlled by motor imagery and P300 potential, respectively. If the mouse encounters a target of no interest, the user rejects it and continues to move the mouse. Otherwise the user selects the target and activates it. With the collaboration of the target filtering and a series of mouse movements and target selections/rejections, the user can select an intended target in a web page. Based on our browser system, common navigation functions, including history rolling forward and backward, hyperlink selection, page scrolling, text input, etc, are available. The system has been tested on seven subjects. Experimental results not only validated the efficacy of the proposed method, but also showed that free internet surfing with a BCI mouse is feasible.

  8. Sorry,officer,I was just surfing

    Institute of Scientific and Technical Information of China (English)

    英文姿

    1998-01-01

    美国被称为a nation on wheels(汽车轮子上的国家),当今计算机科学的迅猛发展与汽车车型的改进和设计的“联姻”就是一个必然。 本文对这种“联姻”的产品——network vehicle/net-mobile——的描绘具有极大的诱惑力: In a net-mobile, a motorist could tap into a regional road system not only to getdirections but also to map out a route around rush-hour traffic snags. Drivers andpassengers will be able to send and receive email, track the latest sports scores or stockquotes, surf the Web, and even play video games. 当然,除了上述“表层”的“联姻”之外.尚有其“深层”的“联姻”,如: On-board microcomputers improve fuel economy and reduce emissions. 也许有人会问:开车时一心岂能两用?不必担心: It not only offered such desktop-computer-like services as email, but allowed adriver to use them without looking away form the road. 文章还列举了不少名车,如General Motors,Toyota,BMW和Mecedes-Benz 已经研制了net-mobile的样车。其中的神奇之处有: OnStar also calls automatically for help if an accident triggers the airbag. (OnStar系统能在事故触发了保

  9. Goddard and Caldwell Oahu, Hawaii Surf Observation Dataset for 1968-2004 (NODC Accession 0001754)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surf reports are typically made several times per day at select locations around Oahu, primarily by Honolulu City and County lifeguards and the Surf News Network,...

  10. Goddard and Caldwell: Oahu, Hawaii surf observation data set for 1968 - 2004 (NODC Accession 0001754)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surf reports are typically made several times per day at select locations around Oahu, primarily by Honolulu City and County lifeguards and the Surf News Network,...

  11. Evaluation of Sift and Surf for Vision Based Localization

    Science.gov (United States)

    Qu, Xiaozhi; Soheilian, Bahman; Habets, Emmanuel; Paparoditis, Nicolas

    2016-06-01

    Vision based localization is widely investigated for the autonomous navigation and robotics. One of the basic steps of vision based localization is the extraction of interest points in images that are captured by the embedded camera. In this paper, SIFT and SURF extractors were chosen to evaluate their performance in localization. Four street view image sequences captured by a mobile mapping system, were used for the evaluation and both SIFT and SURF were tested on different image scales. Besides, the impact of the interest point distribution was also studied. We evaluated the performances from for aspects: repeatability, precision, accuracy and runtime. The local bundle adjustment method was applied to refine the pose parameters and the 3D coordinates of tie points. According to the results of our experiments, SIFT was more reliable than SURF. Apart from this, both the accuracy and the efficiency of localization can be improved if the distribution of feature points are well constrained for SIFT.

  12. 超高水材料覆岩离层及冒落裂隙带注浆充填技术%Grouting Backfill Technology with Super High Water Material for Overburden Bed-separation and Falling Fractured Zone

    Institute of Scientific and Technical Information of China (English)

    王成真; 冯光明

    2011-01-01

    In order to the problems occurred by the great amount pressurized flowing water in the bed-separation after the traditional grouting and subsidence control technology conducted in the overburden bed-separation, in combination with the basic performances of the super water material, based on the key strata theory of the strata control as the guide, the grouting backfill technology with the super water material was provided for the overburden strata bed-separation and falling fractured zone.The technology would fully fill with the super water material in the bed-separation space, the space between the falling rocks of the falling zone and the cracks of the fractured zone.After the grouting material solidified, the filled material could control the activities of the overburden strata.The previous practical results of the overburden strata grouting and the application of the grouting and backfill technology to an imaginary coal mining face showed that the grouting and backfill with the super water material in the overburden strata bed-separation and falling fractured zone would have a subsidence reduction rate between 80% ~ 90% and would have a high production and high efficient coal mining in seam under the buildings,railway line and water body.%为了解决传统覆岩离层注浆减沉技术实施后离层区内大量承压可流动水体所带来的问题,结合超高水材料基本性能,以岩层控制的关键层理论为指导,提出了超高水材料覆岩离层及冒落裂隙带注浆充填技术.该技术将超高水材料浆液充满关键层下的离层空间、冒落带垮落矸石间缝隙以及裂缝带裂隙,凝固后的充填体控制上覆岩活动.根据以往覆岩离层注浆实践结果及超高水材料注浆充填技术在假想工作面的应用可知:超高水材料覆岩离层及冒落裂隙带注浆充填的减沉率在80%~90%,有助实现"三下"压煤开采的高产高效.

  13. Searching versus surfing: how different ways of acquiring content online affect cognitive processing.

    Science.gov (United States)

    Wise, Kevin; Kim, Hyo Jung

    2008-06-01

    An experiment tested whether people orient to and encode pictures selected from a Web site differently, depending on whether the pictures were selected by searching or surfing. Participants in the search condition spent more time selecting pictures than the participants in the surf condition spent. The pictures chosen in the search condition elicited cardiac orienting, while pictures chosen in the surf condition did not. Participants recognized pictures acquired by searching more accurately than they recognized those acquired by surfing, indicating that searching led to better encoding than surfing.

  14. Collaboration on ICT in Dutch Higher Education: The SURF Approach

    Science.gov (United States)

    Boezerooy, Petra; Cordewener, Bas; Liebrand, Wim

    2007-01-01

    In "Thinking Ahead: A Vision of the Role of ICT in Education and Research in the Future, 2007-2010," the higher education institutions in the Netherlands agreed on future strategy. Under the direction of SURF, the Dutch national organization, a collaborative strategy for the application of information and communications technology (ICT)…

  15. Global concept, local practice: Taiwanese experience of CouchSurfing

    NARCIS (Netherlands)

    Chen, D.-J.

    2012-01-01

    Hospitality exchange tourism is a new type of niche tourism, which is highly dependent on the Internet. Through participating in global hospitality exchange networks, such as CouchSurfing, tourists can meet local people who are willing to offer free accommodation, and hosts can also meet people arou

  16. CoBrowser: Surfing the Web Using a Standard Browser.

    Science.gov (United States)

    Maly, K.; Zubair, M.; Li, L.

    Co-browsing is a synchronous class of collaborative applications, which allows a group of users to surf the Web together. Such an application can be deployed in an education environment in several ways. One example of where it can be used would be in courses that are project-oriented. Students would be required to collectively research or explore…

  17. Droplets move over viscoelastic substrates by surfing a ridge

    NARCIS (Netherlands)

    Karpitschka, S.A.; Das, S.; Gorcum, van M.; Perrin, H.; Andreotti, B.; Snoeijer, J.H.

    2015-01-01

    Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a

  18. Internet Surfing for Kindergarten Children: A Feasibility Study

    Science.gov (United States)

    Loo, Alfred

    2012-01-01

    The Internet is an effective learning tool for gifted children because it allows them to independently select the areas in which they have talent. The Internet also enables children to discover and maximize their potential. However, younger children might not have a large enough vocabulary to surf the Internet, even if they are gifted. For…

  19. Data on cytochrome c oxidase assembly in mice and human fibroblasts or tissues induced by SURF1 defect.

    Science.gov (United States)

    Kovářová, Nikola; Pecina, Petr; Nůsková, Hana; Vrbacký, Marek; Zeviani, Massimo; Mráček, Tomáš; Viscomi, Carlo; Houštěk, Josef

    2016-06-01

    This paper describes data related to a research article entitled "Tissue- and species-specific differences in cytochrome c oxidase assembly induced by SURF1 defects" [1]. This paper includes data of the quantitative analysis of individual forms of respiratory chain complexes I, III and IV present in SURF1 knockout (SURF1 (-/-) ) and control (SURF1 (+/+) ) mouse fibroblasts and tissues and in fibroblasts of human control and patients with SURF1 gene mutation. Also it includes data demonstrating response of complex IV, cytochrome c oxidase (COX), to reversible inhibition of mitochondrial translation in SURF1 (-/-) mouse and SURF1 patient fibroblast cell lines.

  20. Isopachs of total net coal in beds >1.2' thick, A - G coal zones, Danforth Hills coal field (dan*thkg)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — These are shapefiles and ARC/INFO polygon coverages showing the isopachs of total net coal in beds greater than or equal to 1.2' thick for the A through G coal...

  1. 利用帕尔贴效应的冷暖型空调床设计及实验分析%Experimental Study of Bed Zoning Air-Conditioner by Using Semiconductor Thermoelectric Effect

    Institute of Scientific and Technical Information of China (English)

    周敬雯; 邓帅; 代彦军; 王如竹

    2012-01-01

    本文基于帕尔贴效应设计了一种冷暖型床体局部空调,简称空调床。空调床由床头制冷装置和床尾供暖装置构成,使床内形成“头凉脚暖”的温度分布。冬季开启供暖模式,可使床内温度达到22°C左右,与房间空调相比,节能率约85%,同时使脚部温度比头部温度高约6°C夏季室温低于30°C时,空调床单独运行,使床内温度降低至28°C左右,节能率约80%。当室温大于30°C时,空调床与房间空调联合运行,与房间空调单独运行相比,节能率为约12%。夏季床内脚部温度比头部温度高1.5°C。%A novel bed zoning air-condition, namely bed AC, was developed based on peltier effect. The Bed AC contains two parts, one is a heating unit on the foot part, and another is a cooling unit on the head part, which can realize "warm feet and cool head". In winter, heat unit operated to maintain bed air temperature around 22°C, and its electrical saving rate was 85%, compared with room AC, and foot air temperature was approximately 6°C higher than that of head. In summer, when room temperature was lower than 30°C, cool unit worked to keep bed air temperature around 28°C, and its energy saving rate was about 80%, and head air temperature was nearly 1.5°C lower than that of foot.. When room temperature was higher than 30°C, bed AC needed to cooperate with room AC, and their total energy saving rate was about 12%, compared with only room AC.

  2. Region Duplication Forgery Detection Technique Based on SURF and HAC

    Directory of Open Access Journals (Sweden)

    Parul Mishra

    2013-01-01

    Full Text Available Region duplication forgery detection is a special type of forgery detection approach and widely used research topic under digital image forensics. In copy move forgery, a specific area is copied and then pasted into any other region of the image. Due to the availability of sophisticated image processing tools, it becomes very hard to detect forgery with naked eyes. From the forged region of an image no visual clues are often detected. For making the tampering more robust, various transformations like scaling, rotation, illumination changes, JPEG compression, noise addition, gamma correction, and blurring are applied. So there is a need for a method which performs efficiently in the presence of all such attacks. This paper presents a detection method based on speeded up robust features (SURF and hierarchical agglomerative clustering (HAC. SURF detects the keypoints and their corresponding features. From these sets of keypoints, grouping is performed on the matched keypoints by HAC that shows copied and pasted regions.

  3. SURF IA Conflict Detection and Resolution Algorithm Evaluation

    Science.gov (United States)

    Jones, Denise R.; Chartrand, Ryan C.; Wilson, Sara R.; Commo, Sean A.; Barker, Glover D.

    2012-01-01

    The Enhanced Traffic Situational Awareness on the Airport Surface with Indications and Alerts (SURF IA) algorithm was evaluated in a fast-time batch simulation study at the National Aeronautics and Space Administration (NASA) Langley Research Center. SURF IA is designed to increase flight crew situation awareness of the runway environment and facilitate an appropriate and timely response to potential conflict situations. The purpose of the study was to evaluate the performance of the SURF IA algorithm under various runway scenarios, multiple levels of conflict detection and resolution (CD&R) system equipage, and various levels of horizontal position accuracy. This paper gives an overview of the SURF IA concept, simulation study, and results. Runway incursions are a serious aviation safety hazard. As such, the FAA is committed to reducing the severity, number, and rate of runway incursions by implementing a combination of guidance, education, outreach, training, technology, infrastructure, and risk identification and mitigation initiatives [1]. Progress has been made in reducing the number of serious incursions - from a high of 67 in Fiscal Year (FY) 2000 to 6 in FY2010. However, the rate of all incursions has risen steadily over recent years - from a rate of 12.3 incursions per million operations in FY2005 to a rate of 18.9 incursions per million operations in FY2010 [1, 2]. The National Transportation Safety Board (NTSB) also considers runway incursions to be a serious aviation safety hazard, listing runway incursion prevention as one of their most wanted transportation safety improvements [3]. The NTSB recommends that immediate warning of probable collisions/incursions be given directly to flight crews in the cockpit [4].

  4. Stern-Gerlach surfing in laser wakefield accelerators

    CERN Document Server

    Flood, Stephen P

    2015-01-01

    We investigate the effects of a Stern-Gerlach-type addition to the Lorentz force on electrons in a laser wakefield accelerator. The Stern-Gerlach-type terms are found to generate a family of trajectories describing electrons that surf along the plasma density wave driven by a laser pulse. Such trajectories could lead to an increase in the size of an electron bunch, which may have implications for attempts to exploit such bunches in future free electron lasers.

  5. Stern-Gerlach surfing in laser wakefield accelerators

    Science.gov (United States)

    Flood, Stephen P.; Burton, David A.

    2015-09-01

    We investigate the effects of a Stern-Gerlach-type addition to the Lorentz force on electrons in a laser wakefield accelerator. The Stern-Gerlach-type terms are found to generate a family of trajectories describing electrons that 'surf' along the plasma density wave driven by a laser pulse. Such trajectories could lead to an increase in the size of an electron bunch, which may have implications for attempts to exploit such bunches in future free electron lasers.

  6. Las alteraciones posturales en miembros inferiores en el surf

    OpenAIRE

    2015-01-01

    Cuando el equilibrio neuromuscular no es óptimo durante la práctica de un deporte, es posible que, a largo plazo, aparezcan trastornos posturales que, dependiendo del tiempo de entrenamiento, pueden convertirse en un obstáculo para la salud. Es por esto, que mediante esta investigación he pretendido mostrar las alteraciones posturales que el surf puede llegar a provocar en quienes lo practican. Objetivo: Analizar las alteraciones posturales en los miembros inferiores de surfist...

  7. Tissue- and species-specific differences in cytochrome c oxidase assembly induced by SURF1 defects.

    Science.gov (United States)

    Kovářová, Nikola; Pecina, Petr; Nůsková, Hana; Vrbacký, Marek; Zeviani, Massimo; Mráček, Tomáš; Viscomi, Carlo; Houštěk, Josef

    2016-04-01

    Mitochondrial protein SURF1 is a specific assembly factor of cytochrome c oxidase (COX), but its function is poorly understood. SURF1 gene mutations cause a severe COX deficiency manifesting as the Leigh syndrome in humans, whereas in mice SURF1(-/-) knockout leads only to a mild COX defect. We used SURF1(-/-) mouse model for detailed analysis of disturbed COX assembly and COX ability to incorporate into respiratory supercomplexes (SCs) in different tissues and fibroblasts. Furthermore, we compared fibroblasts from SURF1(-/-) mouse and SURF1 patients to reveal interspecies differences in kinetics of COX biogenesis using 2D electrophoresis, immunodetection, arrest of mitochondrial proteosynthesis and pulse-chase metabolic labeling. The crucial differences observed are an accumulation of abundant COX1 assembly intermediates, low content of COX monomer and preferential recruitment of COX into I-III2-IVn SCs in SURF1 patient fibroblasts, whereas SURF1(-/-) mouse fibroblasts were characterized by low content of COX1 assembly intermediates and milder decrease in COX monomer, which appeared more stable. This pattern was even less pronounced in SURF1(-/-) mouse liver and brain. Both the control and SURF1(-/-) mice revealed only negligible formation of the I-III2-IVn SCs and marked tissue differences in the contents of COX dimer and III2-IV SCs, also less noticeable in liver and brain than in heart and muscle. Our studies support the view that COX assembly is much more dependent on SURF1 in humans than in mice. We also demonstrate markedly lower ability of mouse COX to form I-III2-IVn supercomplexes, pointing to tissue-specific and species-specific differences in COX biogenesis.

  8. Root-zone cooling effect of water-cooled seedling bed on growth of tomato seedling%水冷式苗床根际降温效果及其对番茄幼苗生长的影响

    Institute of Scientific and Technical Information of China (English)

    李胜利; 师晓丹; 夏亚真; 孙治强

    2014-01-01

    作为水分和养分吸收运输的主要器官,根系及其代谢直接影响着植株的生长与发育,相对于地上部温度植株对地温更为敏感。根际高温是影响夏季蔬菜集约化育苗主要障碍因子之一,适宜、稳定的根际温度是幼苗根系生长和培育壮苗的重要保证。为了降低夏季集约化育苗时幼苗的根际高温环境,设计了一种低能耗的根际降温方式,该研究利用地下水作为降温媒介,采用梯形排管作为冷却管道,设计了一套水冷式苗床用于集约化育苗根际局部降温。试验结果表明,在番茄育苗期间,水冷式苗床番茄幼苗根际积温、日均温和平均最高温分别比对照苗床降低了154.1、4.5和6.5℃。水冷式苗床平均一天中番茄幼苗根际温度高于25℃历时比对照苗床减少了7.6 h,高于28℃历时比对照苗床减少了7.2 h。水冷式苗床番茄幼苗叶片的蒸腾速率比对照提高了36.3%,提高了叶-气温差。水冷式苗床番茄幼苗根系活力和光合作用显著高于对照苗床,壮苗指数比对照苗床提高了34.9%。因此,水冷式降温苗床能够较好的降低根际温度,缓解夏季高温对番茄幼苗生长的胁迫。%As the main plant organ of absorbing and transporting water and nutrients, root system and its metabolism directly affect plant growth and development.Plant growth is more susceptible to root zone temperature than above ground portion. The root zone temperature greatly affects the growth and physiological metabolism of plant. Optimal and stable rhizosphere temperature is an important factor for root growth and metabolism. The heat stress around rhizosphere during summer season is an important factor limiting the seedling growth. Root-zone cooling is more economical compared with air temperature cooling, it can be an effective solution to alleviate high temperature stress. A new water-cooled seedling bed (WSD) was exploited by using

  9. Impact of the Internet surfing on reading practices and choices

    Directory of Open Access Journals (Sweden)

    Fayaz Ahmad Loan

    2012-06-01

    Full Text Available Reading in the 21st century networked society is no longer confined to the print reading. The scope of the reading has extended to the Internet sources that changed the traditional reading culture of the readers. The present study was conducted to identify the impact of the Internet surfing on reading practices and choices of the net generation college students. The survey method was applied to conduct the study and a questionnaire was used as a data collection tool. A sample of 676 students was selected from different strata based on gender, region and faculty in the degree colleges of the Kashmir region, Jammu and Kashmir state, India. In the sample size only 302 confirmed themselves as the e-readers and their responses were analyzed. Results reveal that the reading behavior of the online readers is in transition as the Internet surfing has increased non-sequential reading, interactive reading, superficial reading, and extensive reading and at the same rates is responsible for decreasing concentrated and in-depth reading. Plus, the Internet surfing has increased reading of the news & views, general knowledge, selected fields, sexual content, spiritual/religious text and has decreased reading of literature. To validate the results, the findings were correlated with earlier studies and hypotheses were formed and tested using the Chi-square test. However, the students have not experienced any electronic reading device like kindle (of Amazon or iPod (of Apple during browsing the electronic sources and it could be the future area of research.

  10. Ribosomal protein L7a is encoded by a gene (Surf-3) within the tightly clustered mouse surfeit locus.

    Science.gov (United States)

    Giallongo, A; Yon, J; Fried, M

    1989-01-01

    The mouse Surfeit locus, which contains a cluster of at least four genes (Surf-1 to Surf-4), is unusual in that adjacent genes are separated by no more than 73 base pairs (bp). The heterogeneous 5' ends of Surf-1 and Surf-2 are separated by only 15 to 73 bp, the 3' ends of Surf-1 and Surf-3 are only 70 bp apart, and the 3' ends of Surf-2 and Surf-4 overlap by 133 bp. This very tight clustering suggests a cis interaction between adjacent Surfeit genes. The Surf-3 gene (which could code for a basic polypeptide of 266 amino acids) is a highly expressed member of a pseudogene-containing multigene family. By use of an anti-peptide serum (against the C-terminal nine amino acids of the putative Surf-3 protein) for immunofluorescence and immunoblotting of mouse cell components and by in vitro translation of Surf-3 cDNA hybrid-selected mRNA, the Surf-3 gene product was identified as a 32-kilodalton ribosomal protein located in the 60S ribosomal subunit. From its subunit location, gel migration, and homology with a limited rat ribosomal peptide sequence, the Surf-3 gene was shown to encode the mouse L7a ribosomal protein. The Surf-3 gene is highly conserved through evolution and was detected by nucleic acid hybridization as existing in multiple copies (multigene families) in other mammals and as one or a few copies in birds, Xenopus, Drosophila, and Schizosaccharomyces pombe. The Surf-3 C-terminal anti-peptide serum detects a 32-kilodalton protein in other mammals, birds, and Xenopus but not in Drosophila and S. pombe. The possible effect of interaction of the Surf-3 ribosomal protein gene with adjacent genes in the Surfeit locus at the transcriptional or posttranscriptional level or both levels is discussed. Images PMID:2648130

  11. Image Retrieval Method Using Top-surf Descriptor

    CERN Document Server

    Ji, Ye

    2011-01-01

    This report presents the results and details of a content-based image retrieval project using the Top-surf descriptor. The experimental results are preliminary, however, it shows the capability of deducing objects from parts of the objects or from the objects that are similar. This paper uses a dataset consisting of 1200 images of which 800 images are equally divided into 8 categories, namely airplane, beach, motorbike, forest, elephants, horses, bus and building, while the other 400 images are randomly picked from the Internet. The best results achieved are from building category.

  12. Electron surfing acceleration in a current sheet of flares

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A model of electron acceleration in a current sheet of flares is studied by the analytical approximation solution and the test particle simulation. The electron can be trapped in a potential of propagating electrostatic wave. The trapped electron moving with the phase velocity vp of wave may be effectively accelerated by evc p× Bz force along the outflow direction in the current sheet, if a criterion condition K > 0 for electron surfing acceleration is satisfied. The electron will be accelerated continuously until the electron detrap from the wave potential at the turning point S.

  13. Social Networking Sites' Influence on Travelers' Authentic Experience a Case Study of Couch Surfing

    Science.gov (United States)

    Liu, Xiao

    2013-01-01

    This study explored travelers' experiences in the era of network hospitality 2.0 using CouchSurfing.org as a case study. The following research questions guided this study: 1) what experience does CouchSurfing create for travelers before, during and after their travel? 2) how does couch surfers' experience relate to authenticity in context of…

  14. E-based Humanities and E-humanities on a SURF platform

    NARCIS (Netherlands)

    Kircz, J.G.

    2004-01-01

    As of 2003, SURF enables three platforms: ICT and Research, Education, and Organisation. Within these programmes, SURF has funds available to promote ICT innovations. Innovation is not an easy notion to explain. Too often we encounter new wine in old bottles and changes in vocabulary frequently cove

  15. Learning and Identity in Overlapping Communities of Practice: Surf Club, School and Sports Clubs

    Science.gov (United States)

    Light, Richard; Nash, Melanie

    2006-01-01

    Large numbers of children and young people spend their weekends and holidays engaged in the activities of over 300 surf clubs across Australia each summer. Long term membership in these clubs, beginning from as young as five years of age, forms a significant part of children's and young people's development yet surf clubs have yet to receive…

  16. Peering inside the granular bed: illuminating feedbacks between bed-load transport and bed-structure evolution

    Science.gov (United States)

    Houssais, M.; Jerolmack, D. J.; Martin, R. L.

    2013-12-01

    O. Eiff, Erosion and deposition of particles on a bed sheared by a viscous flow, Journal of Fluid Mech., 519, 55-80, 2004 Frey, P. and Church, M. (2011), Bedload: a granular phenomenon. Earth Surf. Process. Landforms, 36: 58-69. doi: 10.1002/esp.2103 Turowski, J. M., A. Badoux, and D. Rickenmann (2011), Start and end of bedload transport in gravel-bed streams, Geophys. Res. Lett., 38, L04401, doi:10.1029/2010GL046558.

  17. Estimation of pressure drop in the mixing zone of beds in operation filters as drinking water treatment by a mathematical model; Estimacion de la perdida de carga en la zona de mezcla mediante una ecuacion matematica en filtros pilotos para el tratamiento del agua potable

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Miranda, J. P.

    2010-07-01

    This paper describes the correlation of a mathematical model that considers the pressure drop (energy) in the mixing zone of beds in operation filters as drinking water treatment, filters applied in conventional pilot operated and mounted on a water treatment plant of a municipally in Colombia. (Author) 20 refs.

  18. Information surfing with the JHU/APL coherent imager

    Science.gov (United States)

    Ratto, Christopher R.; Shipley, Kara R.; Beagley, Nathaniel; Wolfe, Kevin C.

    2015-05-01

    The ability to perform remote forensics in situ is an important application of autonomous undersea vehicles (AUVs). Forensics objectives may include remediation of mines and/or unexploded ordnance, as well as monitoring of seafloor infrastructure. At JHU/APL, digital holography is being explored for the potential application to underwater imaging and integration with an AUV. In previous work, a feature-based approach was developed for processing the holographic imagery and performing object recognition. In this work, the results of the image processing method were incorporated into a Bayesian framework for autonomous path planning referred to as information surfing. The framework was derived assuming that the location of the object of interest is known a priori, but the type of object and its pose are unknown. The path-planning algorithm adaptively modifies the trajectory of the sensing platform based on historical performance of object and pose classification. The algorithm is called information surfing because the direction of motion is governed by the local information gradient. Simulation experiments were carried out using holographic imagery collected from submerged objects. The autonomous sensing algorithm was compared to a deterministic sensing CONOPS, and demonstrated improved accuracy and faster convergence in several cases.

  19. Evaluation of optimized well location and geology characteristics of coal-bed methane in Shulan coalfield of Fraxinus mandshurica zone%舒兰煤田水曲柳区煤层气地质特征及优选井位评价

    Institute of Scientific and Technical Information of China (English)

    谢石; 谢颖; 于宁

    2015-01-01

    The coal-bed methane sources in Shulan coalfield of Fraxinus mandshurica zone are better. Ten billion cubic meters coal-bed methane is expected to be received. The content of coal-bed methane is higher in this district which is an ideal exploration and development area of coal-bed methane.%舒兰煤田水曲柳区煤层气资源条件较好,有望获得煤层气资源量约10亿立方米,同时该区具有煤层气含量较高,页岩层在煤系地层中较发育,是理想的煤层气勘探开发区.

  20. Repensar la comunicación institucional: las diez reglas del surf / Rethinking institutional communication: the ten rules of surfing

    Directory of Open Access Journals (Sweden)

    Diego Apolo Buenaño

    2014-12-01

    Full Text Available En este ensayo se presenta un análisis desde distintas concepciones de la comunicación estratégica, en donde además de vincular aspectos centrales y tensiones que enfrentan las organizaciones en la actualidad, se ofrecen acercamientos teóricos y prácticos que contribuyan a repensar la manera que en se desarrolla la comunicación en las instituciones. En el trabajo se vincula el deporte del surf y sus reglas como eje que permite realizar comparaciones que aporten al abordaje de la comunicación desde perspectivas que buscan la confluencia entre intereses institucionales y de los actores que intervienen en el proceso mediante la investigación del entorno, el respeto a las prácticas sociales y la colaboración como base para la consecución de los objetivos conjuntos. Abstract This article presents an analysis from different conceptions of strategic communication, which in addition to linking central aspects and tensions developed by organizations today, theoretical and practical approaches are offered and contribute to rethink the way that the communication is developed in institutions. In this work the sport of surfing and its rules are vinculated as the axis that allows comparisons to contribute to addressing communication from perspectives seeking convergence between institutional interests and actors involved in the process investigating the environment, the respect to social practices and collaboration as the basis for achieving the common goals.

  1. Detection of Region Duplication Forgery in Digital Images Using SURF

    Directory of Open Access Journals (Sweden)

    B L Shivakumar

    2011-07-01

    Full Text Available An Image would yield better impact in convincing someone of something rather than pure description by words. Digital images are widely used in various fields like medical imaging, journalism, scientific manipulations and digital forensics. However, images are not reliable as it may be. Digital images can be easily tampered with image editing tools. One of the major problems in image forensics is determining if a particular image is authentic or not. Digital image forensic is an emerging field of image processing area. Copy-move forgery is one type of image forgery in digital image forensic where various methods have been proposed in the field to detect the forgery. In this paper a technique is presented to detect Copy-Move Forgery based on SURF and KD-Tree for multidimensional data matching. We demonstrate our method with high resolution images affected by copy-move forgery.

  2. SurfCut: Free-Boundary Surface Extraction

    KAUST Repository

    Algarni, Marei

    2016-09-15

    We present SurfCut, an algorithm for extracting a smooth simple surface with unknown boundary from a noisy 3D image and a seed point. In contrast to existing approaches that extract smooth simple surfaces with boundary, our method requires less user input, i.e., a seed point, rather than a 3D boundary curve. Our method is built on the novel observation that certain ridge curves of a front propagated using the Fast Marching algorithm are likely to lie on the surface. Using the framework of cubical complexes, we design a novel algorithm to robustly extract such ridge curves and form the surface of interest. Our algorithm automatically cuts these ridge curves to form the surface boundary, and then extracts the surface. Experiments show the robustness of our method to errors in the data, and that we achieve higher accuracy with lower computational cost than comparable methods. © Springer International Publishing AG 2016.

  3. Military personnel recognition system using texture, colour, and SURF features

    Science.gov (United States)

    Irhebhude, Martins E.; Edirisinghe, Eran A.

    2014-06-01

    This paper presents an automatic, machine vision based, military personnel identification and classification system. Classification is done using a Support Vector Machine (SVM) on sets of Army, Air Force and Navy camouflage uniform personnel datasets. In the proposed system, the arm of service of personnel is recognised by the camouflage of a persons uniform, type of cap and the type of badge/logo. The detailed analysis done include; camouflage cap and plain cap differentiation using gray level co-occurrence matrix (GLCM) texture feature; classification on Army, Air Force and Navy camouflaged uniforms using GLCM texture and colour histogram bin features; plain cap badge classification into Army, Air Force and Navy using Speed Up Robust Feature (SURF). The proposed method recognised camouflage personnel arm of service on sets of data retrieved from google images and selected military websites. Correlation-based Feature Selection (CFS) was used to improve recognition and reduce dimensionality, thereby speeding the classification process. With this method success rates recorded during the analysis include 93.8% for camouflage appearance category, 100%, 90% and 100% rates of plain cap and camouflage cap categories for Army, Air Force and Navy categories, respectively. Accurate recognition was recorded using SURF for the plain cap badge category. Substantial analysis has been carried out and results prove that the proposed method can correctly classify military personnel into various arms of service. We show that the proposed method can be integrated into a face recognition system, which will recognise personnel in addition to determining the arm of service which the personnel belong. Such a system can be used to enhance the security of a military base or facility.

  4. Surfing through Hyperspace - Understanding Higher Universes in Six Easy Lessons

    Science.gov (United States)

    Pickover, Clifford A.

    2001-05-01

    Do a little armchair time-travel, rub elbows with a four-dimensional intelligent life form, or stretch your mind to the furthest corner of an uncharted universe. With this astonishing guidebook, Surfing Through Hyperspace , you need not be a mathematician or an astrophysicist to explore the all-but-unfathomable concepts of hyperspace and higher-dimensional geometry.No subject in mathematics has intrigued both children and adults as much as the idea of a fourth dimension. Philosophers and parapsychologists have meditated on this mysterious space that no one can point to but may be all around us. Yet this extra dimension has a very real, practical value to mathematicians and physicists who use it every day in their calculations. In the tradition of Flatland , and with an infectious enthusiasm, Clifford Pickover tackles the problems inherent in our 3-D brains trying to visualize a 4-D world, muses on the religious implications of the existence of higher-dimensional consciousness, and urges all curious readers to venture into "the unexplored territory lying beyond the prison of the obvious." Pickover alternates sections that explain the science of hyperspace with sections that dramatize mind-expanding concepts through a fictional dialogue between two futuristic FBI agents who dabble in the fourth dimension as a matter of national security. This highly accessible and entertaining approach turns an intimidating subject into a scientific game open to all dreamers.Surfing Through Hyperspace concludes with a number of puzzles, computer experiments and formulas for further exploration, inviting readers to extend their minds across this inexhaustibly intriguing scientific terrain.

  5. Evaluation of a 3% surf solution (surf field mastitis test) for the diagnosis of subclinical bovine and bubaline mastitis.

    Science.gov (United States)

    Muhammad, Ghulam; Naureen, Abeera; Asi, Muhammad Nadeem; Saqib, Muhammad; Fazal-ur-Rehman

    2010-03-01

    To evaluate a 3% solution of household detergent viz., Surf Excel (Surf field mastitis test, SFMT) vis-à-vis California mastitis test (CMT), Whiteside test (WST), somatic cell counts (SCC; cut off limit = 5 x 10(5) cells per millilitre) and bacteriological cultures for the detection of subclinical mastitis in quarter foremilk samples (n=800) of dairy cows and buffaloes. Culture and SCC were used as gold standards. All tests were evaluated parallel and serial patterns. The sensitivities of SFMT, SCC, culture, CMT and WST in parallel testing were 72.82, 81.55, 87.38, 75.73 and 54.37%, respectively in cows, while 66.22, 79.73, 82.43, 70.27 and 50.00, respectively in buffaloes. SFMT was significantly (pCMT in both species. In serial testing, percent specificity of SFMT (87.12 in cow; 85.16 in buffaloes) was significantly (PCMT (83.33 in cow; 80.64 in buffaloes). The negative predictive values of SFMT (93.50 in cow; 96.35 in buffaloes) differed non-significantly from that of CMT (94.02 in cow; 96.15 in buffaloes). The kappa index between the tests was moderate to perfect both in parallel (0.54 to >0.80) and serial (0.58 to >0.8) testing. On the basis of closely similar diagnostic efficiency of SFMT to CMT in terms of sensitivity, specificity, predictive values and kappa index together with inexpensive and ready availability of SFMT reagent, it tempting to suggest that SFMT can be use as a cheaper, user-friendly alternative animal-side subclinical mastitis diagnostic test in poor countries.

  6. SURF imaging beams in an aberrative medium: generation and post-processing enhancement

    CERN Document Server

    Nasholm, Sven Peter; 10.1109/TUFFC.2012.2494

    2013-01-01

    This paper presents numerical simulations of dual-frequency second-order ultrasound field (SURF) reverberation suppression transmit-pulse complexes. Such propagation was previously studied in a homogeneous medium. Here instead the propagation path includes a strongly aberrating body-wall modeled by a sequence of delay-screens. The applied SURF transmit pulse complexes each consist of a high-frequency imaging 3.5 MHz pulse combined with a low-frequency 0.5 MHz sound speed manipulation pulse. Furthermore, the feasibility of two signal post-processing methods are investigated using the aberrated transmit SURF beams. These methods are previously shown to adjust the depth of maximum SURF reverberation suppression within a homogeneous medium. The request of the study arises because imaging situations where reverberation suppression is useful are also likely to produce pulse wave-front distortion (aberration). Such distortions could potentially produce time-delays that cancel the accumulated propagation time-delay n...

  7. The rate of beneficial mutations surfing on the wave of a range expansion.

    Directory of Open Access Journals (Sweden)

    Rémi Lehe

    Full Text Available Many theoretical and experimental studies suggest that range expansions can have severe consequences for the gene pool of the expanding population. Due to strongly enhanced genetic drift at the advancing frontier, neutral and weakly deleterious mutations can reach large frequencies in the newly colonized regions, as if they were surfing the front of the range expansion. These findings raise the question of how frequently beneficial mutations successfully surf at shifting range margins, thereby promoting adaptation towards a range-expansion phenotype. Here, we use individual-based simulations to study the surfing statistics of recurrent beneficial mutations on wave-like range expansions in linear habitats. We show that the rate of surfing depends on two strongly antagonistic factors, the probability of surfing given the spatial location of a novel mutation and the rate of occurrence of mutations at that location. The surfing probability strongly increases towards the tip of the wave. Novel mutations are unlikely to surf unless they enjoy a spatial head start compared to the bulk of the population. The needed head start is shown to be proportional to the inverse fitness of the mutant type, and only weakly dependent on the carrying capacity. The precise location dependence of surfing probabilities is derived from the non-extinction probability of a branching process within a moving field of growth rates. The second factor is the mutation occurrence which strongly decreases towards the tip of the wave. Thus, most successful mutations arise at an intermediate position in the front of the wave. We present an analytic theory for the tradeoff between these factors that allows to predict how frequently substitutions by beneficial mutations occur at invasion fronts. We find that small amounts of genetic drift increase the fixation rate of beneficial mutations at the advancing front, and thus could be important for adaptation during species invasions.

  8. The rate of beneficial mutations surfing on the wave of a range expansion.

    Science.gov (United States)

    Lehe, Rémi; Hallatschek, Oskar; Peliti, Luca

    2012-01-01

    Many theoretical and experimental studies suggest that range expansions can have severe consequences for the gene pool of the expanding population. Due to strongly enhanced genetic drift at the advancing frontier, neutral and weakly deleterious mutations can reach large frequencies in the newly colonized regions, as if they were surfing the front of the range expansion. These findings raise the question of how frequently beneficial mutations successfully surf at shifting range margins, thereby promoting adaptation towards a range-expansion phenotype. Here, we use individual-based simulations to study the surfing statistics of recurrent beneficial mutations on wave-like range expansions in linear habitats. We show that the rate of surfing depends on two strongly antagonistic factors, the probability of surfing given the spatial location of a novel mutation and the rate of occurrence of mutations at that location. The surfing probability strongly increases towards the tip of the wave. Novel mutations are unlikely to surf unless they enjoy a spatial head start compared to the bulk of the population. The needed head start is shown to be proportional to the inverse fitness of the mutant type, and only weakly dependent on the carrying capacity. The precise location dependence of surfing probabilities is derived from the non-extinction probability of a branching process within a moving field of growth rates. The second factor is the mutation occurrence which strongly decreases towards the tip of the wave. Thus, most successful mutations arise at an intermediate position in the front of the wave. We present an analytic theory for the tradeoff between these factors that allows to predict how frequently substitutions by beneficial mutations occur at invasion fronts. We find that small amounts of genetic drift increase the fixation rate of beneficial mutations at the advancing front, and thus could be important for adaptation during species invasions.

  9. Effect of adsorbent particle size on the relative merits of a non-triangular and a triangular separation region in the optimal design of a three-zone simulated moving bed chromatography for binary separation with linear isotherms.

    Science.gov (United States)

    Mun, Sungyong

    2016-06-24

    The design approaches for a three-zone simulated moving bed (SMB) chromatography with linear isotherms can be classified into two categories, depending on whether the SMB design is based on a classical region (i.e., triangular region of the triangle theory) in the first quadrant (m2, m3) plane or on a non-triangular separation region in the third quadrant (m2, m3) plane. The SMBs based on the classical and the non-triangular design approaches, which are named here as (m(+))_SMB and (m(-))_SMB respectively, are compared in this study using the Pareto solutions from the simultaneous optimization of throughput and desorbent usage under the constraints on product purities and pressure drop. The results showed that the (m(-))_SMB approach led to significantly lower desorbent usage than the (m(+))_SMB approach, which was due to the fact that the flow-rate-ratios from the (m(-))_SMB approach are extremely lower than those from the (m(+))_SMB approach. This factor also enables the (m(-))_SMB to have a significantly lower pressure drop, thereby making its throughput less restricted by a pressure-drop constraint. Due to such advantage of the (m(-))_SMB, it can make a further substantial improvement in throughput by modulating its adsorbent particle size properly. This issue was investigated using a model separation system containing succinic acid and acetic acid. It was confirmed that if the adsorbent particle size corresponding to the boundary between a mass-transfer limiting region and a pressure-drop limiting region is adopted, the (m(-))_SMB can lead to 82% higher throughput and 73% lower desorbent usage than the (m(+))_SMB. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Face Recognition System based on SURF and LDA Technique

    Directory of Open Access Journals (Sweden)

    Narpat A. Singh

    2016-02-01

    Full Text Available In the past decade, Improve the quality in face recognition system is a challenge. It is a challenging problem and widely studied in the different type of imag-es to provide the best quality of faces in real life. These problems come due to illumination and pose effect due to light in gradient features. The improvement and optimization of human face recognition and detection is an important problem in the real life that can be handles to optimize the error rate, accuracy, peak signal to noise ratio, mean square error, and structural similarity Index. Now-a-days, there several methods are proposed to recognition face in different problem to optimize above parameters. There occur many invariant changes in hu-man faces due to the illumination and pose variations. In this paper we proposed a novel method in face recogni-tion to improve the quality parameters using speed up robust feature and linear discriminant analysis for opti-mize result. SURF is used for feature matching. In this paper, we use linear discriminant analysis for the edge dimensions reduction to live faces from our data-sets. The proposed method shows the better result as compare to the previous result on the basis of comparative analysis because our method show the better quality and better results in live images of face.

  11. Large herbivores surf waves of green-up during spring.

    Science.gov (United States)

    Merkle, Jerod A; Monteith, Kevin L; Aikens, Ellen O; Hayes, Matthew M; Hersey, Kent R; Middleton, Arthur D; Oates, Brendan A; Sawyer, Hall; Scurlock, Brandon M; Kauffman, Matthew J

    2016-06-29

    The green wave hypothesis (GWH) states that migrating animals should track or 'surf' high-quality forage at the leading edge of spring green-up. To index such high-quality forage, recent work proposed the instantaneous rate of green-up (IRG), i.e. rate of change in the normalized difference vegetation index over time. Despite this important advancement, no study has tested the assumption that herbivores select habitat patches at peak IRG. We evaluated this assumption using step selection functions parametrized with movement data during the green-up period from two populations each of bighorn sheep, mule deer, elk, moose and bison, totalling 463 individuals monitored 1-3 years from 2004 to 2014. Accounting for variables that typically influence habitat selection for each species, we found seven of 10 populations selected patches exhibiting high IRG-supporting the GWH. Nonetheless, large herbivores selected for the leading edge, trailing edge and crest of the IRG wave, indicating that other mechanisms (e.g. ruminant physiology) or measurement error inherent with satellite data affect selection for IRG. Our evaluation indicates that IRG is a useful tool for linking herbivore movement with plant phenology, paving the way for significant advancements in understanding how animals track resource quality that varies both spatially and temporally.

  12. Surfing through hyperspace understanding higher universes in six easy lessons

    CERN Document Server

    Pickover, Clifford A

    1999-01-01

    Do a little armchair time-travel, rub elbows with a four-dimensional intelligent life form, or stretch your mind to the furthest corner of an uncharted universe. With this astonishing guidebook, Surfing Through Hyperspace, you need not be a mathematician or an astrophysicist to explore the all-but-unfathomable concepts of hyperspace and higher-dimensional geometry. No subject in mathematics has intrigued both children and adults as much as the idea of a fourth dimension. Philosophers and parapsychologists have meditated on this mysterious space that no one can point to but may be all around us. Yet this extra dimension has a very real, practical value to mathematicians and physicists who use it every day in their calculations. In the tradtion of Flatland, and with an infectious enthusiasm, Clifford Pickover tackles the problems inherent in our 3-D brains trying to visualize a 4-D world, muses on the religious implications of the existence of higher-dimensional consciousness, and urges all curious readers to v...

  13. Aerosol Production in the Surf Zone and Effects on IR Extinction

    DEFF Research Database (Denmark)

    Neele, F. P.; Leeuw, G. de; Eijk, A. M. J. van;

    1998-01-01

    Paper presented at the RTO SET Symposium on E-O Propagation, Signature and System Performance Under Adverse Meteorological Conditions Considering Out-of-Area Operations, held at the Italian Air Force Academy, Naples, Italy, 16-19 March 1998....

  14. Video and Field Observations of Wave Attenuation in a Muddy Surf Zone

    Science.gov (United States)

    2011-01-01

    the Gulf of Mexico . These authors showed that during pre-frontal conditions when wave energy increases, sediment is resuspended, mixed and...shallow shelf, Gulf of Mexico . Continental Shelf Research 26, 2073-2091. Marques, W., 2009. Estudo da dinamica da pluma costeira da Lagoa dos Patos. Phd... Brasil . Pesquisas em Geociencias 20. 18-26. Vinzon, S., Meirelles. S.. Le3o. T.. 2008. Wave generated lutoclines offshore of Cassino Beach. Brazil

  15. A Temporal and Spatial Analysis of Wave-Generated Foam Patterns in the Surf Zone

    Science.gov (United States)

    2017-01-10

    tilted downward in the offshore direction (Nadaoka et al. 1989). Nadaoka et al. (1989) also observed that the ODEs can reach the bottom and are a...150 200 250 300 350 12 (outlined in black in Figure 4). It is necessary to use a search box because the UAV moves slightly with wind gusts. Each...approximately 0.25 to 0.64 meters. The areas are also consistent between the top boxes, which are located farther offshore , and the bottom boxes, which

  16. Software and Support Development for an Environmental Data Buoy System for Predicting Surf-Zone Characteristics

    Science.gov (United States)

    1981-02-28

    Version ii • ~PROGRAMr BOPRTM C PROGRAM NAME IS B10 :R T, READS DATA FROM MEHOR’ AN’D CHECKS C; ADDRESS AND PU’S DATA INTO 1024-DATA ARRAY C PRINT OUT...next I -99994X 999941M 29:, 0-* Nif WE 1 J>0; to "neqb" 30: "posb": for L1I to 1024; if WE L >0; ’to "pos" 31: next L rL1t104ifWL K;’o"n" 32: "neqb

  17. Importance of Antecedent Beach and Surf-Zone Morphology to Wave Runup Predictions

    Science.gov (United States)

    2016-10-01

    tidal dependence in SIG , which instead correlates well with sqrt(HoLo) (r2=0.65, p<ɘ.001). DISCUSSION: The above results are discussed in the...band energy reaching the shoreline, supporting one hypothesis proposed by Guedes et al. (2011). Interestingly, neither Hsig nor SIG correlates with...observed ηR, SIN, and SIG (similar to the approach of Equation 1) and these variables compared with forcing parameters measured at the foreshore (Bf and

  18. The Design and Implementation of a Prototype Surf-Zone Robot for Waterborne Operations

    Science.gov (United States)

    2015-12-01

    developed and tested for mobility in a beachfront environment. Three wheel- designs were tested during fixed pattern tests on grass, concrete and sand. The...part of the internal electronics. To include the connectors in the design, the waterproof cylinder end caps are modified using CNC milling as shown... rubber coating (Plasti-Dip) and a liquid repellent treatment (Rust-Oleum Never Wet–multisurface). An FDM sparse part T5 was coated as depicted in Figure

  19. Design of a Prototype Autonomous Amphibious WHEGS(Trademark) Robot for Surf-Zone Operations

    Science.gov (United States)

    2005-06-01

    screws that are in line with the slotted holes. Once assembled, orthodontic rubber bands are stretched between the fixed screws in the outer shell, and...is received from the user on port 4001. It extracts the information about the required speed and servo position, transmits that directly to the pulse...doesn’t have any errors, it extracts the robots current heading, pitch, and roll information. d. GPS Costatement The GPS costatement is also

  20. Estimating wave energy dissipation in the surf zone using thermal infrared imagery

    National Research Council Canada - National Science Library

    Carini, Roxanne J; Chickadel, C. Chris; Jessup, Andrew T; Thomson, Jim

    2015-01-01

    ...‐resolving model by Duncan (1981). The wave energy dissipation rate estimates show a pattern of increased breaking during low tide over a sand bar, consistent with in situ turbulent kinetic energy dissipation rate estimates from fixed...

  1. Surf zone, infragravity wave energy flux, and runup in extreme conditions

    Science.gov (United States)

    Fiedler, J. W.; Brodie, K. L.; McNinch, J.; Guza, R. T.

    2014-12-01

    Waves, currents, and sand levels were observed on a 1.4 km-long cross-shore transect extending from the back beach to ~11 m water depth at Agate Beach, Oregon in Fall 2013. Wave runup and water table fluctuations on this low slope (1:80) beach were measured with a cliff-mounted scanning Lidar and buried pressure sensors. Significant wave heights at an offshore buoy in 128m depth ranged from small (0.5m) to extreme (7.5m), with peak periods between 4-22 seconds. Infragravity frequency (nominally 0.01 Hz) horizontal runup excursions exceeded 100m, and infragravity cross-shore velocity exceeded 3 m/s. Cross-shore patterns of infragravity wave energy flux, observed with seven co-located pressure and current meters, indicate 'proto-saturation' of the inner surfzone in extreme conditions. That is, the intensification of incident wave forcing (e.g. higher energy, longer swell) leads to a wider surfzone and an increase in the shoreward infragravity wave energy seaward of the surfzone, but produces more modest increases in flux in the inner surfzone, and in the runup. Nonlinear energy balances, based on the observations, show transfer of energy from sea-swell to infragravity waves, and vice-versa. The infragravity energy balance closes in cases with low energy incident sea-swell. With more energetic incident waves, there is an unexplained inner surfzone energy sink at the lowest IG frequencies (0.004-0.02 Hz). Ongoing work aims to quantify the effect on infragravity energy balances by infragravity wave breaking and bottom friction. Additionally, the estimates may be degraded by contamination with rotational velocities of surfzone eddies. Whatever the dynamical explanation, infragravity wave runup on a low slope beach in high-energy conditions is limited significantly by dissipation. The slow rate of runup increase suggests nascent, or 'proto' saturation. This work was supported by the U.S. Army Corps of Engineers.

  2. The importance of the surf zone for fish and brown shrimp in The Netherlands

    NARCIS (Netherlands)

    Teal, L.R.; Keeken, van O.A.

    2011-01-01

    Human activity in the North Sea is increasing, invloving more motorised cargo shipping, and rapidly expanding construction and operation of oil platforms and wind farms. In recent years underwater sand levees or sand suppletion near shore has been performed for coastal protection. The aim of this li

  3. Surf zone dynamics along the south Karnataka Coast between Bhatkal and Ullal, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Chandramohan, P.; SanilKumar, V.; Nayak, B.U.; Raju, N.S.N.

    stronger in June, and relatively low and steady during the rest of the year. Coast between Padubidri and Ullal experienced relatively stronger longshore currents than the coast between Maravanthe and Malpe. Longshore sediment transport rate was relatively...

  4. Infragravity-wave modulation of short-wave celerity in the surf zone

    NARCIS (Netherlands)

    Tissier, M.; Bonneton, P.; Michallet, H.; Ruessink, B.G.

    2015-01-01

    The cross-shore evolution of individual wave celerity is investigated using two highresolution laboratory experiments on bichromatic waves. Individual waves are tracked during their onshore propagation and their characteristics, including celerity, are estimated. The intrawave variability in celerit

  5. Cross-shore suspended sediment transport in the surf zone: A fieldbased parameterization

    DEFF Research Database (Denmark)

    Aagaard, Troels; Black, Kerry; Greenwood, Brian

    2002-01-01

    sediment transport, sediment concentrations, incident waves, undertow, morphodynamics, beach processes......sediment transport, sediment concentrations, incident waves, undertow, morphodynamics, beach processes...

  6. Waves, Currents, and Sediment Transport in the Surf Zone Along Long, Straight Beaches

    Science.gov (United States)

    2005-08-01

    bmx + F bwx + F srx + F swmx + F srmx (4.49) τ cby = F bmy + F bwy...F sry + F swmy + F srmy +F bvy (4.50) with F bhpx = −ρgh ∂¯η ∂x (4.51) 119 F bmx = −ρ ∂ ∂x ( aU 2 s + q bx U 0 ) (4.52) F bwx = − ∂ ∂x S xx (4.53) F...shows “mean-current- associated” forcing terms due to the mean current advection, F bmx (thin full line), the interaction of waves and mean currents,

  7. On the mitigation of surf-riding by adjusting center of buoyancy in design stage

    Directory of Open Access Journals (Sweden)

    Liwei Yu

    2017-05-01

    Full Text Available High-speed vessels are prone to the surf-riding in adverse quartering seas. The possibility of mitigating the surf-riding of the ITTC A2 fishing vessel in the design stage is investigated using the 6-DOF weakly non-linear model developed for surf-riding simulations in quartering seas. The longitudinal position of the ship's center of buoyancy (LCB is chosen as the design parameter. The adjusting of LCB is achieved by changing frame area curves, and hull surfaces are reconstructed accordingly using the Radial Basis Function (RBF. Surf-riding motions in regular following seas for cases with different LCBs and Froude numbers are simulated using the numerical model. Results show that the surf-riding cannot be prevented by the adjusting of LCB. However, it occurs with a higher threshold speed when ship's center of buoyancy (COB is moved towards stem compared to moving towards stern, which is mainly due to the differences on wave resistance caused by the adjusting of LCB.

  8. KARAKTERISTIK, MOTIVASI DAN NIAT WISATAWAN SURFING DI PANTAI KECAMATAN KUTA UTARA

    Directory of Open Access Journals (Sweden)

    Ni Putu Windy Pramita

    2017-04-01

    Full Text Available Black sandy beach tourist attraction of Kuta Northen region that is Batu Bolong beach and Batu Mejan beach which has potential a beautifull oncean, sunset, sunbathing and surfingthe purpose of this study was to determinethe characteristics, motivasi, and intentions rating surfing at Kuta Northen beach. The method used observation, questionnaires, interviews, literature study, and documentation. 213 respondens rating surfing with quantitative descriptive and regression linier analisys. The result obtained in this study are based on age characteristics surfing travelers will see the most travelers age between 18-29 years, male gender, country of origin Australia, and is a businessman, a master degree educational level, and marital status is not married. Surfing tourist motivation using push and pull factor with the highest scores on the social interaction. And Intention surfing tourist with the highest score there is positive world of mouth with Variabel tourist have the effect of 13,20% with a probability level of sig. 0,000, the motivation positive and significant efeect on the intention tourist but in small quantities. Therefore to improve the intention tourist come to the beach district of north kuta from the motivation pull and push should also improve the quality of beaches such as keeping the beach becomes the most importans thing that will directly make tourist feel comfortable. advice for managers is to add a lifeguard to keep the beach.

  9. Computing OpenSURF on OpenCL and General Purpose GPU

    Directory of Open Access Journals (Sweden)

    Wanglong Yan

    2013-10-01

    Full Text Available Speeded-Up Robust Feature (SURF algorithm is widely used for image feature detecting and matching in computer vision area. Open Computing Language (OpenCL is a framework for writing programs that execute across heterogeneous platforms consisting of CPUs, GPUs, and other processors. This paper introduces how to implement an open-sourced SURF program, namely OpenSURF, on general purpose GPU by OpenCL, and discusses the optimizations in terms of the thread architectures and memory models in detail. Our final OpenCL implementation of OpenSURF is on average 37% and 64% faster than the OpenCV SURF v2.4.5 CUDA implementation on NVidia's GTX660 and GTX460SE GPUs, repectively. Our OpenCL program achieved real-time performance (>25 Frames Per Second for almost all the input images with different sizes from 320*240 to 1024*768 on NVidia's GTX660 GPU, NVidia's GTX460SE GPU and AMD's Radeon HD 6850 GPU. Our OpenCL approach on NVidia's GTX660 GPU is more than 22.8 times faster than its original CPU version on Intel's Dual-Core E5400 2.7G on average.

  10. Computing OpenSURF on OpenCL and General Purpose GPU

    Directory of Open Access Journals (Sweden)

    Wanglong Yan

    2013-10-01

    Full Text Available Speeded-Up Robust Feature (SURF algorithm is widely used for image feature detecting and matching in computer vision area. Open Computing Language (OpenCL is a framework for writing programs that execute across heterogeneous platforms consisting of CPUs, GPUs, and other processors. This paper introduces how to implement an open-sourced SURF program, namely OpenSURF, on general purpose GPU by OpenCL, and discusses the optimizations in terms of the thread architectures and memory models in detail. Our final OpenCL implementation of OpenSURF is on average 37% and 64% faster than the OpenCV SURF v2.4.5 CUDA implementation on NVidia’s GTX660 and GTX460SE GPUs, repectively. Our OpenCL program achieved real-time performance (>25 Frames Per Second for almost all the input images with different sizes from 320*240 to 1024*768 on NVidia’s GTX660 GPU, NVidia’s GTX460SE GPU and AMD’s Radeon HD 6850 GPU. Our OpenCL approach on NVidia’s GTX660 GPU is more than 22.8 times faster than its original CPU version on Intel’s Dual-Core E5400 2.7G on average.

  11. Bed rest during pregnancy

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000581.htm Bed rest during pregnancy To use the sharing features on ... few days or weeks. This is called bed rest. Bed rest used to be recommended routinely for ...

  12. Solar winds surfs waves in the Sun's atmosphere!

    Science.gov (United States)

    1999-07-01

    opposite ends after threading it through an object, like a ring. If one person wiggles the string rapidly up and down, waves form in the string that move toward the person at the other end. The ring will "surf" these waves and move toward the other person as well. Try it! "Even with this major discovery, there are questions left to answer. The observations have made it abundantly clear that heavy particles like oxygen 'surf' on the waves, and there is also mounting evidence that waves are responsible for accelerating the hydrogen atoms, the most common constituent of the solar wind. Future observations are needed to establish this fact. Many other kinds of particles, such as helium (second most common) have never been observed in the accelerating part of the corona, and new observations are also needed to refine our understanding of how the waves interact with the solar wind as a whole," said Dr. Steven Cranmer of the Harvard-Smithsonian Center for Astrophysics, lead author of the research to be published in the Astrophysical Journal*. Nevertheless, SOHO has again been able to reveal another of the Sun's mysteries: "This is another triumph for SOHO, stealing a long-held secret from our Sun", said Dr Martin Huber, Head of ESA Space Science Department and co-investigator for UVCS. *Ref. Article by S.Cranmer, G.B. Field and J.L. Kohl on Astrophysical Journal ( June 20, Vol 518, p. 937-947) available on the web at: http://www.journals.uchicago.edu/ApJ/journal/issues/ApJ/v518n2/39802/sc0.html

  13. SURF'S UP! – Protein classification by surface comparisons

    Indian Academy of Sciences (India)

    Joanna M Sasin; Adam Godzik; Janusz M Bujnicki

    2007-01-01

    Large-scale genome sequencing and structural genomics projects generate numerous sequences and structures for ‘hypothetical’ proteins without functional characterizations. Detection of homology to experimentally characterized proteins can provide functional clues, but the accuracy of homology-based predictions is limited by the paucity of tools for quantitative comparison of diverging residues responsible for the functional divergence. SURF’S UP! is a web server for analysis of functional relationships in protein families, as inferred from protein surface maps comparison according to the algorithm. It assigns a numerical score to the similarity between patterns of physicochemical features (charge, hydrophobicity) on compared protein surfaces. It allows recognizing clusters of proteins that have similar surfaces, hence presumably similar functions. The server takes as an input a set of protein coordinates and returns files with ``spherical coordinates” of proteins in a PDB format and their graphical presentation, a matrix with values of mutual similarities between the surfaces, and the unrooted tree that represents the clustering of similar surfaces, calculated by the neighbor-joining method. SURF’S UP! facilitates the comparative analysis of physicochemical features of the surface, which are the key determinants of the protein function. By concentrating on coarse surface features, SURF’S UP! can work with models obtained from comparative modelling. Although it is designed to analyse the conservation among homologs, it can also be used to compare surfaces of non-homologous proteins with different three-dimensional folds, as long as a functionally meaningful structural superposition is supplied by the user. Another valuable characteristic of our method is the lack of initial assumptions about the functional features to be compared. SURF’S UP! is freely available for academic researchers at http://asia.genesilico.pl/surfs_up/.

  14. Scaled photographs of surf over the full range of breaker sizes on the north shore of Oahu and Jaws, Maui, Hawaiian Islands (NODC Accession 0001753)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital surf photographs were scaled using surfers as height benchmarks to estimate the size of the breakers. Historical databases for surf height in Hawaii are...

  15. Magnetohydrodynamic Flow Past a Permeable Bed

    Directory of Open Access Journals (Sweden)

    R. Venugopal

    1983-01-01

    Full Text Available The paper evaluates mass flow velocity heat transfer rates and velocity/temperature distributions in the viscous, incompressible and slightly conducting fluid past a permeable bed in three different configurations namely (1 Couette flow (2 Poiseuille flow and (3 free surface flow, under the influence of a uniform transverse magnetic field. To discuss the solution, the flow region is divided into two zones : Zone 1 (from the impermeable upper rigid plate to the permeable bed in which the flow is laminar and governed by Navier-Stokes equations, and Zone 2 (the permeable bed below the nominal surface in which the flow is governed by Darcy law. The paper also investigates the effects of magnetic field, porosity and Biot number on the physical quantities mentioned above.

  16. A Novel Image Retrieval Based on Visual Words Integration of SIFT and SURF.

    Directory of Open Access Journals (Sweden)

    Nouman Ali

    Full Text Available With the recent evolution of technology, the number of image archives has increased exponentially. In Content-Based Image Retrieval (CBIR, high-level visual information is represented in the form of low-level features. The semantic gap between the low-level features and the high-level image concepts is an open research problem. In this paper, we present a novel visual words integration of Scale Invariant Feature Transform (SIFT and Speeded-Up Robust Features (SURF. The two local features representations are selected for image retrieval because SIFT is more robust to the change in scale and rotation, while SURF is robust to changes in illumination. The visual words integration of SIFT and SURF adds the robustness of both features to image retrieval. The qualitative and quantitative comparisons conducted on Corel-1000, Corel-1500, Corel-2000, Oliva and Torralba and Ground Truth image benchmarks demonstrate the effectiveness of the proposed visual words integration.

  17. A Novel Image Retrieval Based on Visual Words Integration of SIFT and SURF.

    Science.gov (United States)

    Ali, Nouman; Bajwa, Khalid Bashir; Sablatnig, Robert; Chatzichristofis, Savvas A; Iqbal, Zeshan; Rashid, Muhammad; Habib, Hafiz Adnan

    2016-01-01

    With the recent evolution of technology, the number of image archives has increased exponentially. In Content-Based Image Retrieval (CBIR), high-level visual information is represented in the form of low-level features. The semantic gap between the low-level features and the high-level image concepts is an open research problem. In this paper, we present a novel visual words integration of Scale Invariant Feature Transform (SIFT) and Speeded-Up Robust Features (SURF). The two local features representations are selected for image retrieval because SIFT is more robust to the change in scale and rotation, while SURF is robust to changes in illumination. The visual words integration of SIFT and SURF adds the robustness of both features to image retrieval. The qualitative and quantitative comparisons conducted on Corel-1000, Corel-1500, Corel-2000, Oliva and Torralba and Ground Truth image benchmarks demonstrate the effectiveness of the proposed visual words integration.

  18. Environmental Awareness of Surf Tourists: A Case Study in the Algarve

    Directory of Open Access Journals (Sweden)

    Fabia Frank

    2015-06-01

    Full Text Available Even though surf tourism in Portugal is an economic activity with a steady growth rate, there are not many assessment studies available. Using a survey undertaken in surf camps located in the Vila do Bispo County, this study aims to analyse the environmental awareness of surf tourists in the Algarve. Through the New Environmental Paradigm (NEP scale it is shown that the environmental attitudes of respondents are strongly pro-ecological but also reveal some anthropocentric aspects. Tourists were asked about their willingness to pay for an accommodation tax earmarked for environmental protection in the Algarve. The results show that the large majority (86% would be willing to pay, which indicates a high environmental awareness. It is also found that the willingness to pay is related to the nationality, with respondents from Germany, Austria and Switzerland showing a higher willingness to pay.

  19. Loss-of-function mutations of SURF-1 are specifically associated with Leigh syndrome with cytochrome c oxidase deficiency.

    Science.gov (United States)

    Tiranti, V; Jaksch, M; Hofmann, S; Galimberti, C; Hoertnagel, K; Lulli, L; Freisinger, P; Bindoff, L; Gerbitz, K D; Comi, G P; Uziel, G; Zeviani, M; Meitinger, T

    1999-08-01

    Mutations of SURF-1, a gene located on chromosome 9q34, have recently been identified in patients affected by Leigh syndrome (LS), associated with deficiency of cytochrome c oxidase (COX), the terminal component of the mitochondrial respiratory chain. To investigate to what extent SURF-1 is responsible for human disorders because of COX deficiency, we undertook sequence analysis of the SURF-1 gene in 46 unrelated patients. We analyzed 24 COX-defective patients classified as having typical Leigh syndrome (LS(COX)), 6 patients classified as Leigh-like (LL(COX)) cases, and 16 patients classified as non-LS(COX) cases. Frameshift, stop, and splice mutations of SURF-1 were detected in 18 of 24 (75%) of the LS(COX) cases. No mutations were found in the LL(COX) and non-LS(COX) group of patients. Rescue of the COX phenotype was observed in transfected cells from patients harboring SURF-1 mutations, but not in transfected cell lines from 2 patients in whom no mutations were detected by sequence analysis. Loss of function of SURF-1 protein is specifically associated with LS(COX), although a proportion of LS(COX) cases must be the result of abnormalities in genes other than SURF-1. SURF-1 is the first nuclear gene to be consistently mutated in a major category of respiratory chain defects. DNA analysis can now be used to accurately diagnose LS(COX), a common subtype of Leigh syndrome.

  20. Heart Rate Responses of High School Students Participating in Surfing Physical Education.

    Science.gov (United States)

    Bravo, Michelle M; Cummins, Kevin M; Nessler, Jeff A; Newcomer, Sean C

    2016-06-01

    Despite the nation's rising epidemic of childhood obesity and diabetes, schools struggle to promote physical activities that help reduce risks for cardiovascular disease. Emerging data suggest that adopting novel activities into physical education (PE) curriculum may serve as an effective strategy for increasing physical activity in children. The purpose of this investigation was to characterize activity in the water and heart rates (HRs) of high school students participating in surf PE courses. Twenty-four male (n = 20) and female (n = 4) high school students (mean age = 16.7 ± 1.0 years) who were enrolled in surf PE courses at 2 high schools participated in this investigation. Daily measurements of surfing durations, average HR, and maximum HR were made on the students with HR monitors (PolarFT1) over an 8-week period. In addition, HR and activity in the water was evaluated during a single session in a subset of students (n = 11) using a HR monitor (PolarRCX5) and a video camera (Canon HD). Activity and HR were synchronized and evaluated in 5-second intervals during data analyses. The average duration that PE students participated in surfing during class was 61.7 ± 1.0 minutes. Stationary, paddling, wave riding, and miscellaneous activities comprised 42.7 ± 9.5, 36.7 ± 7.9, 2.9 ± 1.4, and 17.8 ± 11.4 percent of the surf session, respectively. The average and maximum HRs during these activities were 131.1 ± 0.9 and 177.2 ± 1.0 b·min, respectively. These data suggest that high school students participating in surf PE attained HRs and durations that are consistent with recommendations with cardiovascular fitness and health. In the future, PE programs should consider incorporating other action sports into their curriculum to enhance cardiovascular health.

  1. Run-up of tsunamis and long waves in terms of surf-similarity

    DEFF Research Database (Denmark)

    Madsen, Per A.; Fuhrman, David R.

    2008-01-01

    of the surf-similarity parameter and the amplitude to depth ratio determined at some offshore location. We use the analytical expressions to analyze the impact of tsunamis on beaches and relate the discussion to the recent Indian Ocean tsunami from December 26, 2004. An important conclusion is that extreme...... run-up combined with extreme flow velocities occurs for surf-similarity parameters of the order 3-6, and for typical tsunami wave periods this requires relatively mild beach slopes. Next, we compare the theoretical solutions to measured run-up of breaking and non-breaking irregular waves on steep...

  2. SURF: Taking Sustainable Remediation from Concept to Standard Operating Procedure (Invited)

    Science.gov (United States)

    Smith, L. M.; Wice, R. B.; Torrens, J.

    2013-12-01

    Over the last decade, many sectors of industrialized society have been rethinking behavior and re-engineering practices to reduce consumption of energy and natural resources. During this time, green and sustainable remediation (GSR) has evolved from conceptual discussions to standard operating procedure for many environmental remediation practitioners. Government agencies and private sector entities have incorporated GSR metrics into their performance criteria and contracting documents. One of the early think tanks for the development of GSR was the Sustainable Remediation Forum (SURF). SURF brings together representatives of government, industry, consultancy, and academia to parse the means and ends of incorporating societal and economic considerations into environmental cleanup projects. Faced with decades-old treatment programs with high energy outputs and no endpoints in sight, a small group of individuals published the institutional knowledge gathered in two years of ad hoc meetings into a 2009 White Paper on sustainable remediation drivers, practices, objectives, and case studies. Since then, SURF has expanded on those introductory topics, publishing its Framework for Integrating Sustainability into Remediation Projects, Guidance for Performing Footprint Analyses and Life-Cycle Assessments for the Remediation Industry, a compendium of metrics, and a call to improve the integration of land remediation and reuse. SURF's research and members have also been instrumental in the development of additional guidance through ASTM International and the Interstate Technology and Regulatory Council. SURF's current efforts focus on water reuse, the international perspective on GSR (continuing the conversations that were the basis of SURF's December 2012 meeting at the National Academy of Sciences in Washington, DC), and ways to capture and evaluate the societal benefits of site remediation. SURF also promotes and supports student chapters at universities across the US

  3. Agglomeration in a fluidized bed using multiple jet streams

    Energy Technology Data Exchange (ETDEWEB)

    Rehmat, A.; Abbasian, J. (Institute of Gas Technology, Chicago, IL (United States)); Kothari, M.; Hariri, H.; Arastoopour, H. (Illinois Inst. of Tech., Chicago, IL (United States))

    1992-01-01

    Tests were conducted to determine the overall temperature distribution, temperature in the vicinity of the jets, and the rate of agglomeration in a fluidized bed containing multiple jet streams. Agglomeration of ash during coal gasification increases carbon utilization efficiency considerably. The agglomeration requires a fluidized-bed reactor with a specially designed distributor equipped with a jet to yield a hot zone confined within the bed. The rate of agglomeration depends upon the size and the intensity of the zone. This rate, and hence the unit capacity, could be increased by adding multiple jets to the distributor. The purpose of this study was to verify this phenomenon. The temperature distribution inside the agglomerating fluidized-bed reactor with a single jet was studied by Hariri et al. Various parameters were involved in agglomeration phenomena -- bed material, fluidization velocity, bed temperature, jet velocity, jet temperature, bed geometry, and distributor geometry. Controlled agglomerates were produced in the fluidized bed when a sloped gas distributor consisting of a central jet and a porous plate was used. Gas at temperatures above the melting temperature of a bed material was introduced into the jet and gas at temperatures below the softening temperature was introduced into the distributor. The rate of agglomerate formation was significantly influenced by an increase in either jet air or auxiliary (grid) air temperature. The extent of agglomeration also depended strongly upon the volume of the hot zone confined within the isotherms with temperatures higher than the melting point of the bed material.

  4. Agglomeration in a fluidized bed using multiple jet streams

    Energy Technology Data Exchange (ETDEWEB)

    Rehmat, A.; Abbasian, J. [Institute of Gas Technology, Chicago, IL (United States); Kothari, M.; Hariri, H.; Arastoopour, H. [Illinois Inst. of Tech., Chicago, IL (United States)

    1992-12-31

    Tests were conducted to determine the overall temperature distribution, temperature in the vicinity of the jets, and the rate of agglomeration in a fluidized bed containing multiple jet streams. Agglomeration of ash during coal gasification increases carbon utilization efficiency considerably. The agglomeration requires a fluidized-bed reactor with a specially designed distributor equipped with a jet to yield a hot zone confined within the bed. The rate of agglomeration depends upon the size and the intensity of the zone. This rate, and hence the unit capacity, could be increased by adding multiple jets to the distributor. The purpose of this study was to verify this phenomenon. The temperature distribution inside the agglomerating fluidized-bed reactor with a single jet was studied by Hariri et al. Various parameters were involved in agglomeration phenomena -- bed material, fluidization velocity, bed temperature, jet velocity, jet temperature, bed geometry, and distributor geometry. Controlled agglomerates were produced in the fluidized bed when a sloped gas distributor consisting of a central jet and a porous plate was used. Gas at temperatures above the melting temperature of a bed material was introduced into the jet and gas at temperatures below the softening temperature was introduced into the distributor. The rate of agglomerate formation was significantly influenced by an increase in either jet air or auxiliary (grid) air temperature. The extent of agglomeration also depended strongly upon the volume of the hot zone confined within the isotherms with temperatures higher than the melting point of the bed material.

  5. The Ocean as a Unique Therapeutic Environment: Developing a Surfing Program

    Science.gov (United States)

    Clapham, Emily D.; Armitano, Cortney N.; Lamont, Linda S.; Audette, Jennifer G.

    2014-01-01

    Educational aquatic programming offers necessary physical activity opportunities to children with disabilities and the benefits of aquatic activities are more pronounced for children with disabilities than for their able-bodied peers. Similar benefits could potentially be derived from surfing in the ocean. This article describes an adapted surfing…

  6. Post-Processing Enhancement of Reverberation-Noise Suppression in Dual-Frequency SURF Imaging

    CERN Document Server

    Nasholm, Sven Peter; Angelsen, Bjørn A J; 10.1109/TUFFC.2011.1811

    2013-01-01

    A post-processing adjustment technique which aims for enhancement of dual-frequency SURF (Second order UltRasound Field) reverberation-noise suppression imaging in medical ultrasound is analyzed. Two variant methods are investigated through numerical simulations. They both solely involve post-processing of the propagated high-frequency (HF) imaging wave fields, which in real-time imaging corresponds to post-processing of the beamformed receive radio-frequency signals. Hence the transmit pulse complexes are the same as for the previously published SURF reverberation-suppression imaging method. The adjustment technique is tested on simulated data from propagation of SURF pulse complexes consisting of a 3.5 MHz HF imaging pulse added to a 0.5 low-frequency sound-speed manipulation pulse. Imaging transmit beams are constructed with and without adjustment. The post-processing involves filtering, e.g., by a time-shift, in order to equalize the two SURF HF pulses at a chosen depth. This depth is typically chosen to ...

  7. The Ocean as a Unique Therapeutic Environment: Developing a Surfing Program

    Science.gov (United States)

    Clapham, Emily D.; Armitano, Cortney N.; Lamont, Linda S.; Audette, Jennifer G.

    2014-01-01

    Educational aquatic programming offers necessary physical activity opportunities to children with disabilities and the benefits of aquatic activities are more pronounced for children with disabilities than for their able-bodied peers. Similar benefits could potentially be derived from surfing in the ocean. This article describes an adapted surfing…

  8. Implementing CHC to Counter Shoulder Surfing Attack in PassPoint – Style Graphical Passwords

    Directory of Open Access Journals (Sweden)

    M. Joshuva

    2011-05-01

    Full Text Available Graphical passwords are an alternative to existing alphanumeric passwords. In Graphical passwords users click on images than type a long, complex password. Passpoints scheme is one of the Graphical user authentication techniques. In this method the password is represented by multiple clicks on a single image. One of the advantages with Passpoints scheme is that, a user can click on any place in the image as a click point. Graphical authentication suffers a major drawback of Shoulder-surfing. Shoulder-surfing refers to someone observing the user’s action as the user enters a password. Due to this, the user’s action can be monitored by the attacker or it can be captured using recording devices such as camera. Sobrado and Birget suggested Convex Hull Click (CHC scheme to counter shoulder-surfing using PassIcons which is different from PassPoint scheme. In this paper, we described how CHC is implemented in Passpoint-sheme to counter Shoulder Surfing Attack.

  9. Performance differences between sexes in the pop-up phase of surfing.

    Science.gov (United States)

    Eurich, Alea D; Brown, Lee E; Coburn, Jared W; Noffal, Guillermo J; Nguyen, Diamond; Khamoui, Andy V; Uribe, Brandon P

    2010-10-01

    Surfing is a dynamic sport that is multidirectional in nature and requires peak performance in variable ocean conditions. Its growing popularity among the female population has stirred curiosity as to whether women can and will 1 day face their male counterparts in head-to-head competition at the top levels. The purpose of this study was to examine male and female differences in performance of a simulated surfing pop-up movement. Forty recreationally trained surfers (20 men and 20 women) were instructed to lie prone on a force plate, in the pop-up position (similar to a push-up), with only their hands in contact with the plate. A velocity transducer was attached to their back via an adjustable strap around their upper trunk. They completed 3 pop-ups as explosively as possible by pushing forcefully with their hands and jumping to their feet. Absolute and relative force and power were measured. Results demonstrated that men exhibited significantly (p pop-up movement. It appears that women may be at a disadvantage in regards to peak performance when compared to their male counterparts in the surfing pop-up movement. Therefore, women should train for both maximum and explosive upper-body strength in addition to their time spent surfing.

  10. Robust Object-Based Watermarking Using SURF Feature Matching and DFT Domain

    Directory of Open Access Journals (Sweden)

    M. Cedillo-Hernandez

    2013-12-01

    Full Text Available In this paper we propose a robust object-based watermarking method, in which the watermark is embedded into the middle frequencies band of the Discrete Fourier Transform (DFT magnitude of the selected object region, altogether with the Speeded Up Robust Feature (SURF algorithm to allow the correct watermark detection, even if the watermarked image has been distorted. To recognize the selected object region after geometric distortions, during the embedding process the SURF features are estimated and stored in advance to be used during the detection process. In the detection stage, the SURF features of the distorted image are estimated and match them with the stored ones. From the matching result, SURF features are used to compute the Affine-transformation parameters and the object region is recovered. The quality of the watermarked image is measured using the Peak Signal to Noise Ratio (PSNR, Structural Similarity Index (SSIM and the Visual Information Fidelity (VIF. The experimental results show the proposed method provides robustness against several geometric distortions, signal processing operations and combined distortions. The receiver operating characteristics (ROC curves also show the desirable detection performance of the proposed method. The comparison with a previously reported methods based on different techniques is also provided.

  11. Baseline Measurements of Shoulder Surfing Analysis and Comparability for Smartphone Unlock Authentication

    Science.gov (United States)

    2017-05-22

    lines, and graphical patterns without lines) in a controlled setting . These videos are designed to simulate shoulder surfing settings under varied attack...than triple the success rate with a single view at 72.44 . The goal of this research is to identify more effective guidance for mobile device users to

  12. Constitutive knockout of Surf1 is associated with high embryonic lethality, mitochondrial disease and cytochrome c oxidase deficiency in mice.

    Science.gov (United States)

    Agostino, Alessandro; Invernizzi, Federica; Tiveron, Cecilia; Fagiolari, Gigliola; Prelle, Alessandro; Lamantea, Eleonora; Giavazzi, Alessio; Battaglia, Giorgio; Tatangelo, Laura; Tiranti, Valeria; Zeviani, Massimo

    2003-02-15

    We report here the creation of a constitutive knockout mouse for SURF1, a gene encoding one of the assembly proteins involved in the formation of cytochrome c oxidase (COX). Loss-of-function mutations of SURF1 cause Leigh syndrome associated with an isolated and generalized COX deficiency in humans. The murine phenotype is characterized by the following hallmarks: (1) high post-implantation embryonic lethality, affecting approximately 90% of the Surf1(-/-) individuals; (2) early-onset mortality of post-natal individuals; (3) highly significant deficit in muscle strength and motor performance; (4) profound and isolated defect of COX activity in skeletal muscle and liver, and, to a lesser extent, heart and brain; (5) morphological abnormalities of skeletal muscle, characterized by reduced histochemical reaction to COX and mitochondrial proliferation; (6) no obvious abnormalities in brain morphology, reflecting the virtual absence of overt neurological symptoms. These results indicate a function for murine Surf1 protein (Surf1p) specifically related to COX and recapitulate, at least in part, the human phenotype. This is the first mammalian model for a nuclear disease gene of a human mitochondrial disorder. Our model constitutes a useful tool to investigate the function of Surf1p, help understand the pathogenesis of Surf1p deficiency in vivo, and evaluate the efficacy of treatment.

  13. Assessments Of Different Speeded Up Robust Features (SURF Algorithm Resolution For Pose Estimation Of UAV

    Directory of Open Access Journals (Sweden)

    Bassem Sheta

    2012-11-01

    Full Text Available The UAV industry is growing rapidly in an attempt to serve both military and commercial applications. A crucial aspect in the development of UAVs is the reduction of navigational sensor costs while maintaining accurate navigation. Advances in visual sensor solutions with traditional navigation sensors are proving to be significantly promising in replacing traditional IMU or GPS systems for many mission scenarios. The basic concept behind Vision Based Navigation (VBN is to find the matches between a set of features in real-time captured images taken by the imaging sensor on the UAV and database images. A scale and rotation invariant image matching algorithm is a key element for VBN of aerial vehicles. Matches between the geo-referenced database images and the new real-time captured ones are determined by employing the fast Speeded Up Robust Features (SURF algorithm. The SURF algorithm consists mainly of two steps: the first is the detection of points of interest and the second is the creation of descriptors for each of these points. In this research paper, two major factors are investigated and tested to efficiently create the descriptors for each point of interest. The first factor is the dimension of the descriptor for a given point of interest. The dimension is affected by the number of descriptor sub-regions which consequently affects the matching time and the accuracy. SURF performance has been investigated and tested using different dimensions of the descriptor. The second factor is the number of sample points in each sub-region which are used to build the descriptor of the point of interest. SURF performance has been investigated and tested by changing thenumber of sample points in each sub-region where the matching accuracy is affected. Assessments of the SURF performance and consequently on UAV VBN are investigated.

  14. Bed Bugs - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Bed Bugs URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Bed Bugs - Multiple Languages To use the sharing features on ...

  15. Bed Bugs and Schools

    Science.gov (United States)

    Bed bugs have long been a pest – feeding on blood, causing itchy bites and generally irritating their human hosts. They are successful hitchhikers, and can move from an infested site to furniture, bedding, baggage, boxes, and clothing.

  16. The association between use of electronic media in bed before going to sleep and insomnia symptoms, daytime sleepiness, morningness, and chronotype.

    Science.gov (United States)

    Fossum, Ingrid Nesdal; Nordnes, Linn Tinnesand; Storemark, Sunniva Straume; Bjorvatn, Bjørn; Pallesen, Ståle

    2014-09-03

    This study investigated whether the use of a television, computer, gaming console, tablet, mobile phone, or audio player in bed before going to sleep was associated with insomnia, daytime sleepiness, morningness, or chronotype. 532 students aged 18-39 were recruited from lectures or via e-mail. Respondents reported the frequency and average duration of their in-bed media use, as well as insomnia symptoms, daytime sleepiness, morningness-eveningness preference and bedtime/rise time on days off. Mean time of media use per night was 46.6 minutes. The results showed that computer usage for playing/surfing/reading was positively associated with insomnia, and negatively associated with morningness. Mobile phone usage for playing/surfing/texting was positively associated with insomnia and chronotype, and negatively associated with morningness. None of the other media devices were related to either of these variables, and no type of media use was related to daytime sleepiness.

  17. Home-loving boreal hare mitochondria survived several invasions in Iberia: the relative roles of recurrent hybridisation and allele surfing.

    Science.gov (United States)

    Melo-Ferreira, J; Farelo, L; Freitas, H; Suchentrunk, F; Boursot, P; Alves, P C

    2014-03-01

    Genetic introgression from a resident species into an invading close relative can result from repeated hybridisation along the invasion front and/or allele surfing on the expansion wave. Cases where the phenomenon is massive and systematic, such as for hares (genus Lepus) in Iberia, would be best explained by recurrent hybridisation but this is difficult to prove because the donor populations are generally extinct. In the Pyrenean foothills, Lepus europaeus presumably replaced Lepus granatensis recently and the present species border is parallel to the direction of invasion, so that populations of L. granatensis in the contact zone represent proxies of existing variation before the invasion. Among three pairs of populations sampled across this border, we find less differentiation of mitochondrial DNA (mtDNA) across than along it, as predicted under recurrent hybridisation at the invasion front. Using autosomal microsatellite loci and X- and Y-linked diagnostic loci, we show that admixture across the border is quasi-absent, making it unlikely that lack of interspecific mtDNA differentiation results from ongoing gene flow. Furthermore, we find that the local species ranges are climatically contrasted, making it also unlikely that ongoing ecology-driven movement of the contact account for mtDNA introgression. The lack of mtDNA differentiation across the boundary is mostly due to sharing of mtDNA from a boreal species currently extinct in Iberia (Lepus timidus) whose mitochondria have thus remained in place since the last deglaciation despite successive invasions by two other species. Home-loving mitochondria thus witness past species distribution rather than ongoing exchanges across stabilised contact zones.

  18. "Do outside": corpo e natureza, medo e gênero no surfe universitário paulistano "From the outside": body and nature, fear and gender in surfing

    Directory of Open Access Journals (Sweden)

    Marília Martins Bandeira

    2011-03-01

    Full Text Available Ao objetivo primeiro desta pesquisa, descrever as dinâmicas do surfe e os significados de sua prática, em especial a relação ser humano/natureza estabelecida por meio do esporte, somaram-se outros objetivos: problematizar a aproximação do pesquisador de seu campo de investigação, a possibilidade de um pesquisador realizar uma investigação através de seu próprio corpo e discutir a questão de gênero no surfe. Sobre o objetivo primeiro desta pesquisa, vivendo e descrevendo as dinâmicas do surfe encontrou-se os significados da relação do surfista com o mar nas sensações corporais experimentadas nas técnicas do remar, sentar, dar o joelhinho e dropar a onda. Que ser capaz de passar a rebentação é associado a um retorno bem sucedido à comunhão do homem com a natureza, sendo as cores, formas e sensações do "outside" o privilégio daquele que vence as dificuldades do tornar-se e ser surfista. Mas, que estas sensações são tidas como possibilidades de corpos corajosos e hábeis, "a priori", entendidos como corpos masculinos. O surfe como campo em que o feminino é visto ainda como exceção dá a pensar que os esportes na natureza e a educação ao ar livre, embora tenham potencial de promover novas condutas políticas e a virtuosa sensibilidade ambiental, não estão livres de reproduzir outros padrões de dominação.The main goal of this research is to describe the dynamics of surfing and its meanings, mainly the human/nature relation established through the sport. Meanwhile, other goals were added: discussing the approach to the field by the researcher, the possibility this researcher could investigate through her own body and the gender matter in the sport. About the main aim of the research, living and experiencing the sport itself, meaning, to the relation between the surfer and the sea, was found in the body sensations experienced through techniques such as paddling, sitting, duck diving and dropping a wave. Being

  19. Introduction to Bed Bugs

    Science.gov (United States)

    ... that there are ways to control bed bugs. Getting good, solid information is the first step in both prevention and control. While there is no chemical quick fix, there are effective strategies to control bed bugs involving both non-chemical and chemical methods. Bed bugs can be hard to find and ...

  20. Fluidized bed coal combustion reactor

    Science.gov (United States)

    Moynihan, P. I.; Young, D. L. (Inventor)

    1981-01-01

    A fluidized bed coal reactor includes a combination nozzle-injector ash-removal unit formed by a grid of closely spaced open channels, each containing a worm screw conveyor, which function as continuous ash removal troughs. A pressurized air-coal mixture is introduced below the unit and is injected through the elongated nozzles formed by the spaces between the channels. The ash build-up in the troughs protects the worm screw conveyors as does the cooling action of the injected mixture. The ash layer and the pressure from the injectors support a fluidized flame combustion zone above the grid which heats water in boiler tubes disposed within and/or above the combustion zone and/or within the walls of the reactor.

  1. Spatially Uniform ReliefF (SURF for computationally-efficient filtering of gene-gene interactions

    Directory of Open Access Journals (Sweden)

    Greene Casey S

    2009-09-01

    Full Text Available Abstract Background Genome-wide association studies are becoming the de facto standard in the genetic analysis of common human diseases. Given the complexity and robustness of biological networks such diseases are unlikely to be the result of single points of failure but instead likely arise from the joint failure of two or more interacting components. The hope in genome-wide screens is that these points of failure can be linked to single nucleotide polymorphisms (SNPs which confer disease susceptibility. Detecting interacting variants that lead to disease in the absence of single-gene effects is difficult however, and methods to exhaustively analyze sets of these variants for interactions are combinatorial in nature thus making them computationally infeasible. Efficient algorithms which can detect interacting SNPs are needed. ReliefF is one such promising algorithm, although it has low success rate for noisy datasets when the interaction effect is small. ReliefF has been paired with an iterative approach, Tuned ReliefF (TuRF, which improves the estimation of weights in noisy data but does not fundamentally change the underlying ReliefF algorithm. To improve the sensitivity of studies using these methods to detect small effects we introduce Spatially Uniform ReliefF (SURF. Results SURF's ability to detect interactions in this domain is significantly greater than that of ReliefF. Similarly SURF, in combination with the TuRF strategy significantly outperforms TuRF alone for SNP selection under an epistasis model. It is important to note that this success rate increase does not require an increase in algorithmic complexity and allows for increased success rate, even with the removal of a nuisance parameter from the algorithm. Conclusion Researchers performing genetic association studies and aiming to discover gene-gene interactions associated with increased disease susceptibility should use SURF in place of ReliefF. For instance, SURF should be

  2. Surf observations from the South Shore of Oahu, Hawaii from 01 March 1972 to 20 November 1987 (NODC Accession 0000274)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Heights of breaking surf were collected by using visual observations from swimmers or divers at the South Shore of Oahu, Hawaii from March 1, 1972 to November 20,...

  3. Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Mid-Atlantic). SURF CLAM

    Science.gov (United States)

    1983-10-01

    invisible, outer, jellylike layer and mine surf clam gender (Ropes et al. the germinal vesicle (Ropes 1980). 1969). Male and female surf clams Longo...Jacobsen, M. K., and W. E. Old, Jr. Lindley, M. G., and R. S. Shallen- 1966. On the identity of Spisula berger. 1976, Purification and similis. Am...1966. A quantitative Masse, H. 1975. Feeding biotogy of .3-year-survey on the meiofauna Astropecten aranciacus. Cah , of known macrofauna communities

  4. Collaborative Strategy on Bed Bugs

    Science.gov (United States)

    The Collaborative Strategy on Bed Bugs was developed by the Federal Bed Bug Workgroup to clarify the federal role in bed bug control and highlight ways that government, community, academia and private industry can work together on bed bug issues.

  5. SurfKin: an ab initio kinetic code for modeling surface reactions.

    Science.gov (United States)

    Le, Thong Nguyen-Minh; Liu, Bin; Huynh, Lam K

    2014-10-05

    In this article, we describe a C/C++ program called SurfKin (Surface Kinetics) to construct microkinetic mechanisms for modeling gas-surface reactions. Thermodynamic properties of reaction species are estimated based on density functional theory calculations and statistical mechanics. Rate constants for elementary steps (including adsorption, desorption, and chemical reactions on surfaces) are calculated using the classical collision theory and transition state theory. Methane decomposition and water-gas shift reaction on Ni(111) surface were chosen as test cases to validate the code implementations. The good agreement with literature data suggests this is a powerful tool to facilitate the analysis of complex reactions on surfaces, and thus it helps to effectively construct detailed microkinetic mechanisms for such surface reactions. SurfKin also opens a possibility for designing nanoscale model catalysts.

  6. An Improvement of Positional Accuracy for View-Based Navigation Using SURF

    Science.gov (United States)

    Hagiwara, Yoshinobu; Imamura, Hiroki; Choi, Yongwoon; Watanabe, Kazuhiro

    In this paper, we propose a reliable method for view-based navigation of mobile robots fully improved in positional accuracy by using feature-points extracted by SURF, and it is verified from the navigation experiments of them. View-based navigations that have used block matching method are not enough in positional accuracy for robots to avoid obstacles and pass narrow doorways. By applying SURF that is stable to illumination and scale changes in an image to the method for view-based navigation, the navigation for robots becomes more robust to variable indoor conditions. In experiments conducted in an indoor corridor with a robot for comparing the proposed method to conventional one, the positional precision was obtained in centimeter-order of within 10.0[cm]. In this view, it suggests that the proposed method is applied to the view-based navigation for robots in such narrow areas as obstacle avoidance and corridors.

  7. Sobre as ondas: surfe, juventude e cultura no Rio de Janeiro dos anos 1960

    Directory of Open Access Journals (Sweden)

    Cleber Dias

    2012-06-01

    Full Text Available Na segunda metade do século XX, torna-se explícita a influência mundial dos Estados Unidos no âmbito esportivo. A disseminação de práticas que possuíam marcas culturais norte-americanas, como é o caso do surfe, não deve ser considerada, contudo, somente como resultado de uma imposição unilateral: há múltiplas apropriações locais que dizem muito sobre o contexto do receptor. Partindo dessa consideração, este artigo objetiva discutir a apreensão do surfe no Rio de Janeiro dos anos 1960. Buscamos debater como a modalidade foi operada como marcador de identidades a partir de vinculações a certas noções de juventude e estilo de vida.

  8. Movements of wintering surf scoters: Predator responses to different prey landscapes

    Science.gov (United States)

    Kirk, M.; Esler, Daniel; Iverson, S.A.; Boyd, W.S.

    2008-01-01

    The distribution of predators is widely recognized to be intimately linked to the distribution of their prey. Foraging theory suggests that predators will modify their behaviors, including movements, to optimize net energy intake when faced with variation in prey attributes or abundance. While many studies have documented changes in movement patterns of animals in response to temporal changes in food, very few have contrasted movements of a single predator species naturally occurring in dramatically different prey landscapes. We documented variation in the winter movements, foraging range size, site fidelity, and distribution patterns of a molluscivorous sea duck, the surf scoter (Melanitta perspicillata), in two areas of coastal British Columbia with very different shellfish prey features. Baynes Sound has extensive tidal flats with abundant clams, which are high-quality and temporally stable prey for scoters. Malaspina Inlet is a rocky fjord-like inlet where scoters consume mussels that are superabundant and easily accessible in some patches but are heavily depleted over the course of winter. We used radio telemetry to track surf scoter movements in both areas and found that in the clam habitats of Baynes Sound, surf scoters exhibited limited movement, small winter ranges, strong foraging site fidelity, and very consistent distribution patterns. By contrast, in mussel habitats in the Malaspina Inlet, surf scoters displayed more movement, larger ranges, little fidelity to specific foraging sites, and more variable distribution patterns. We conclude that features associated with the different prey types, particularly the higher depletion rates of mussels, strongly influenced seasonal space use patterns. These findings are consistent with foraging theory and confirm that predator behavior, specifically movements, is environmentally mediated. ?? 2008 Springer-Verlag.

  9. On trend and on the wave: carving cultural identity through active surf dress

    OpenAIRE

    Anderson, Jonathan Mark

    2015-01-01

    Clothing, as both functional and fashionable, has become a key marker in signifying and shaping personal identity. This is particularly clear in a range of “lifestyle sports” [Wheaton, B. 2004. “Introduction: Mapping the Lifestyle Sportscape.” In Understanding Lifestyle Sports: Consumption, Identity, and Difference, edited by B. Wheaton, 1–28. London: Routledge], including the array of practices associated with the culture of surfing. This paper examines the ways in which companies market per...

  10. "Sub-Surf Rocks"! An A-Level Resource Developed through an Industry-Education Collaboration

    Science.gov (United States)

    Mather, Hazel

    2012-01-01

    A free internet resource called "Sub-Surf Rocks"! was launched in 2010. Its aim is to use seismic data obtained by the oil industry for enhancing the teaching of structural and economic geology at A-level (ages 16-18) in the UK. Seismic data gives a unique insight into the sub-surface and the many high-quality images coupled with…

  11. Effects of water temperature change on immune function in surf clams, Mactra veneriformis (Bivalvia: Mactridae).

    Science.gov (United States)

    Yu, Jin Ha; Song, Jae Hee; Choi, Min Chul; Park, Sung Woo

    2009-09-01

    Surf clam, Mactra veneriformis is one of the crucial fishery resources in Korea. This study was performed to examine the immune functions of the surf clam under the stress of water temperature changes at 10 degrees C, 20 degrees C or 30 degrees C for 24h. Viable bacterial counts (VBC), total haemocyte count (THC), phagocytic activity, lysozyme activity, NRR times and SOD activity were assessed in three different water temperature groups. Clams held at 10 degrees C decreased in THC, lysozyme activity and NRR times, but phagocytic activity was increased. The highest temperature (30 degrees C) significantly increased in THC, whereas it decreased in phagocytic activity, lysozyme activity and NRR times. In clams maintained at 20 degrees C, phagocytic activity, lysozyme activity and NRR times were increased whereas THC was somewhat decreased with respect to clams held at 30 degrees C. However, water temperature changes did not elicit any alteration of VBC and SOD activity. The present study demonstrates that acute water temperature change affects the haemocytic and haemolymphatic functions, reducing immunosurveillance in stressed surf clam, M. veneriformis.

  12. Mutations in the SURF1 gene associated with Leigh syndrome and cytochrome C oxidase deficiency.

    Science.gov (United States)

    Péquignot, M O; Dey, R; Zeviani, M; Tiranti, V; Godinot, C; Poyau, A; Sue, C; Di Mauro, S; Abitbol, M; Marsac, C

    2001-05-01

    Cytochrome c oxidase (COX) deficiency is one of the major causes of Leigh Syndrome (LS), a fatal encephalopathy of infancy or childhood, characterized by symmetrical lesions in the basal ganglia and brainstem. Mutations in the nuclear genes encoding COX subunits have not been found in patients with LS and COX deficiency, but mutations have been identified in SURF1. SURF1 encodes a factor involved in COX biogenesis. To date, 30 different mutations have been reported in 40 unrelated patients. We aim to provide an overview of all known mutations in SURF1, and to propose a common nomenclature. Twelve of the mutations were insertion/deletion mutations in exons 1, 4, 6, 8, and 9; 10 were missense/nonsense mutations in exons 2, 4, 5, 7, and 8; and eight were detected at splicing sites in introns 3 to 7. The most frequent mutation was 312_321del 311_312insAT which was found in 12 patients out of 40. Twenty mutations have been described only once. We also list all polymorphisms discovered to date.

  13. ConSurf 2016: an improved methodology to estimate and visualize evolutionary conservation in macromolecules.

    Science.gov (United States)

    Ashkenazy, Haim; Abadi, Shiran; Martz, Eric; Chay, Ofer; Mayrose, Itay; Pupko, Tal; Ben-Tal, Nir

    2016-07-08

    The degree of evolutionary conservation of an amino acid in a protein or a nucleic acid in DNA/RNA reflects a balance between its natural tendency to mutate and the overall need to retain the structural integrity and function of the macromolecule. The ConSurf web server (http://consurf.tau.ac.il), established over 15 years ago, analyses the evolutionary pattern of the amino/nucleic acids of the macromolecule to reveal regions that are important for structure and/or function. Starting from a query sequence or structure, the server automatically collects homologues, infers their multiple sequence alignment and reconstructs a phylogenetic tree that reflects their evolutionary relations. These data are then used, within a probabilistic framework, to estimate the evolutionary rates of each sequence position. Here we introduce several new features into ConSurf, including automatic selection of the best evolutionary model used to infer the rates, the ability to homology-model query proteins, prediction of the secondary structure of query RNA molecules from sequence, the ability to view the biological assembly of a query (in addition to the single chain), mapping of the conservation grades onto 2D RNA models and an advanced view of the phylogenetic tree that enables interactively rerunning ConSurf with the taxa of a sub-tree.

  14. CAMSHIFT IMPROVEMENT WITH MEAN-SHIFT SEGMENTATION, REGION GROWING, AND SURF METHOD

    Directory of Open Access Journals (Sweden)

    Ferdinan Ferdinan

    2013-10-01

    Full Text Available CAMSHIFT algorithm has been widely used in object tracking. CAMSHIFT utilizescolor features as the model object. Thus, original CAMSHIFT may fail when the object color issimilar with the background color. In this study, we propose CAMSHIFT tracker combined withmean-shift segmentation, region growing, and SURF in order to improve the tracking accuracy.The mean-shift segmentation and region growing are applied in object localization phase to extractthe important parts of the object. Hue-distance, saturation, and value are used to calculate theBhattacharyya distance to judge whether the tracked object is lost. Once the object is judged lost,SURF is used to find the lost object, and CAMSHIFT can retrack the object. The Object trackingsystem is built with OpenCV. Some measurements of accuracy have done using frame-basedmetrics. We use datasets BoBoT (Bonn Benchmark on Tracking to measure accuracy of thesystem. The results demonstrate that CAMSHIFT combined with mean-shift segmentation, regiongrowing, and SURF method has higher accuracy than the previous methods.

  15. Subduction zones seen by GOCE gravity gradients

    DEFF Research Database (Denmark)

    Švarc, Mario; Herceg, Matija; Cammarano, Fabio

    and used as starting point for analysis based on image processing. On obtained maps, locations of known subduction zones were represented with characteristic elongated patterns and cross-sections. Cross sections of well-known subduction zones were used as input patterns for pattern recognition method....... Few pattern recognition methods were tested on all 6 gravity gradient tensor components represented as global scale maps with resolution of 100km (corresponds to the resolution of the GOCE satellite data). By adjusting pattern recognition methods’ features and optimizing various input patterns......, the best method was applied. That is a combination of methods based on SURF (Speeded Up Robust Features) and MSER (Maximally Stable Extremal Regions) algorithms provided in MATLAB’s Computer Vision System Toolbox. Based on 6 gravity gradient components, the global gradient anomaly maps were produced...

  16. Root-zone cooling effect of water-cooled seedling bed under different periods and its influences on growth of tomato seedling%水冷苗床不同时段根际降温对番茄幼苗生长的影响

    Institute of Scientific and Technical Information of China (English)

    李胜利; 张涛; 孙治强

    2015-01-01

    high temperature stress. A new water-cooled seedling bed (WSD) has been proved to be an effective method to lower the root-zone temperature. In order to utilize WSD scientifically, 5 different root-zone cooling periods were designed using the WSD device for root-zone cooling of tomato (Solanum lycopersicum) seedling. The 5 different root-zone cooling periods were as follows: M1 (cooling from 7:00 to 11:00), M2 (cooling from 11:00 to 15:00), M3 (cooling from 7:00 to 19:00), M4 (cooling from 19:00 to 7:00) and M5 (cooling all day). Non-cooling seedling bed was used as control. The objective of this study was to investigate the cooling effect of the WSD under 5 different root-zone cooling periods and its effect on the growth of tomato seedling. The root-zone temperature, seedling growth, root morphological traits and physiological characteristics of tomato seedling were tested. The results showed as follows: The root-zone daily mean temperature and daily maximum temperature of tomato seedlings under 5 cooling periods of the WSD were all lower than those under the non-cooled seedling bed (CK) during tomato seedling period. The cooling effect of the WSD was significantly (P<0.05) correlated with cooling duration and cooling period. Compared with cooling during night, mean temperature in the daytime, daily mean temperature and maximum temperature for the treatments cooling during the day time were lowered significantly (P<0.05). Compared with other treatments, the treatment M3 (cooling from 7:00 to 19:00) and M5 (cooling all day) got the best cooling effects. The daily mean root-zone temperatures of tomato seedlings under M3 and M5 were 23.6 and 22.6℃respectively, which were lowered by 3.3 and 4.3℃ respectively compared with CK during tomato seedling period. The daily variation of root-zone temperature of tomato seedlings was affected also by cooling duration and cooling period. Root-zone temperature of treatments cooling during the day time showed a small variation

  17. Buoyancy Effect on MHD Flow Past a Permeable Bed

    Directory of Open Access Journals (Sweden)

    S. Venkataramana

    1986-10-01

    Full Text Available In this paper, the effect of buoyancy force on the parallel flows bounded above by a rigid permeable plate which may be moving or stationary and below, by a permeable bed has been investigated. To discuss the solution, the flow region is divided into two zones. In Zone 1, the flow is laminar and is governed by the Navier-Stokes equations from the impermeable upper rigid plate to the permeable bed. In Zone 2, the flow is governed by the Darcy law in the permeable bed below the nominal surface. The expressions for velocity and temparature distributions, Slip velocity, slip temperature, mass flow rate and the rates of heat transfer coefficients are obtained. The effects of magnetic, porous, slip and buoyancy parameters and Biot number on the above physical quantities are investigated. The thickness of the boundary layer in Zone 2 has been evaluated.

  18. High frequency of potential entrapment gaps in beds in an acute hospital.

    Science.gov (United States)

    Haugh, Jennifer; O Flatharta, Tomás; Griffin, Tomás P; O'Keeffe, Shaun T

    2014-11-01

    dimensional guidelines for bedrails have been developed to minimise the risk of patient entrapment within the bed. We examined whether bedrails in a large Irish teaching hospital complied with these standards. survey of 60 accessible beds in six hospital wards. a specialised cone and cylinder tool that mimics the size and weight of a small adult neck and head was used to determine gaps in the four zones most associated with entrapment. the number of failures for each zone was 15 beds for zone 1 (any space between the perimeters of the rail); 42 beds for zone 2 (the space under the rail); 41 beds for zone 3 (the space between the inside surface of the bedrail and the mattress) and 13 beds for zone 4 (the space between the mattress and rail at the end of the rail). Failures were more common with hydraulic adjusted than with electric profiling beds. Mattresses that were the wrong size (usually too narrow) or too soft and bedrails that were loose or were poorly maintained accounted for many failures. many beds used in our hospital did not comply with dimensional standards to minimise entrapment risks. This emphasises the need for careful selection of patients for whom bedrails are to be used as well as the need for monitoring and maintenance of bed systems. © The Author 2014. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. On the Potential of Surfers to Monitor Environmental Indicators in the Coastal Zone.

    Directory of Open Access Journals (Sweden)

    Robert J W Brewin

    Full Text Available The social and economic benefits of the coastal zone make it one of the most treasured environments on our planet. Yet it is vulnerable to increasing anthropogenic pressure and climate change. Coastal management aims to mitigate these pressures while augmenting the socio-economic benefits the coastal region has to offer. However, coastal management is challenged by inadequate sampling of key environmental indicators, partly due to issues relating to cost of data collection. Here, we investigate the use of recreational surfers as platforms to improve sampling coverage of environmental indicators in the coastal zone. We equipped a recreational surfer, based in the south west United Kingdom (UK, with a temperature sensor and Global Positioning System (GPS device that they used when surfing for a period of one year (85 surfing sessions. The temperature sensor was used to derive estimates of sea-surface temperature (SST, an important environmental indicator, and the GPS device used to provide sample location and to extract information on surfer performance. SST data acquired by the surfer were compared with data from an oceanographic station in the south west UK and with satellite observations. Our results demonstrate: (i high-quality SST data can be acquired by surfers using low cost sensors; and (ii GPS data can provide information on surfing performance that may help motivate data collection by surfers. Using recent estimates of the UK surfing population, and frequency of surfer participation, we speculate around 40 million measurements on environmental indicators per year could be acquired at the UK coastline by surfers. This quantity of data is likely to enhance coastal monitoring and aid UK coastal management. Considering surfing is a world-wide sport, our results have global implications and the approach could be expanded to other popular marine recreational activities for coastal monitoring of environmental indicators.

  20. Character of shell beds flanking Herod Point shoal, southeastern Long Island Sound, New York

    Science.gov (United States)

    Poppe, L.J.; Williams, S.J.; Babb, Ivar G.

    2011-01-01

    High biogenic productivity, strong tidal currents, shoal topography, and short transport distances combine to favor shell-bed formation along the lower flanks of a cape-associated shoal off Herod Point on Long Island, New York. This shell bed has a densely packed, clast-supported fabric composed largely of undegraded surf clam (Spisula solidissima) valves. It is widest along the central part of the western flank of the shoal where topographic gradients are steep and a stronger flood tide results in residual flow. The bed is narrower and thinner toward the landward margins where currents are too weak to transport larger valves and topographic gradients are gentle, limiting bed-load transport mechanisms by which the shells are concentrated. Reconnaissance mapping off Roanoke Point suggests that shell beds are also present at the other cape-associated shoals off northeastern Long Island, where relatively similar geomorphic and oceanographic conditions exist. These shell beds are important to the Long Island Sound ecosystem because they provide complex benthic habitats of rough and hard substrates at the boundary between the muddy basin floor and mobile sand of the shoals. ?? 2011, the Coastal Education & Research Foundation (CERF).

  1. Fluidized bed calciner apparatus

    Science.gov (United States)

    Owen, Thomas J.; Klem, Jr., Michael J.; Cash, Robert J.

    1988-01-01

    An apparatus for remotely calcining a slurry or solution feed stream of toxic or hazardous material, such as ammonium diurante slurry or uranyl nitrate solution, is disclosed. The calcining apparatus includes a vertical substantially cylindrical inner shell disposed in a vertical substantially cylindrical outer shell, in which inner shell is disposed a fluidized bed comprising the feed stream material to be calcined and spherical beads to aid in heat transfer. Extending through the outer and inner shells is a feed nozzle for delivering feed material or a cleaning chemical to the beads. Disposed in and extending across the lower portion of the inner shell and upstream of the fluidized bed is a support member for supporting the fluidized bed, the support member having uniform slots for directing uniform gas flow to the fluidized bed from a fluidizing gas orifice disposed upstream of the support member. Disposed in the lower portion of the inner shell are a plurality of internal electric resistance heaters for heating the fluidized bed. Disposed circumferentially about the outside length of the inner shell are a plurality of external heaters for heating the inner shell thereby heating the fluidized bed. Further, connected to the internal and external heaters is a means for maintaining the fluidized bed temperature to within plus or minus approximately 25.degree. C. of a predetermined bed temperature. Disposed about the external heaters is the outer shell for providing radiative heat reflection back to the inner shell.

  2. Godunov-Based Model of Swash Zone Dynamics to Advance Coastal Flood Prediction

    Science.gov (United States)

    Shakeri Majd, M.; Sanders, B. F.

    2012-12-01

    Urbanized lowlands in southern California are defended against coastal flooding by sandy beaches that dynamically adjust to changes in water level and wave conditions, particularly during storm events. Recent research has shown that coastal flood impacts are scaled by the volume of beach overtopping flows, and an improved characterization of dynamic overtopping rates is needed to improve coastal flood forecasting (Gallien et al. 2012). However, uncertainty in the beach slope and height makes it difficult to predict the onset of overtopping and the magnitude of resulting flooding. That is, beaches may evolve significantly over a storm event. Sallenger (Sallenger, 2000) describes Impact Levels to distinguish different impact regimes (swash, collision, overwash and inundation) on dunes and barrier islands. Our goal is to model processes in different regimes as was described by him. Godunov-based models adopt a depth-integrated, two-phase approach and the shallow-water hypothesis to resolve flow and sediment transport in a tightly coupled manner that resolves shocks in the air/fluid and fluid/sediment interface. These models are best known in the context of debris flow modeling where the ability to predict the flow of highly concentrated sediment/fluid mixtures is required. Here, the approach is directed at the swash zone. Existing Godunov-based models are reviewed and shown to have drawbacks relative to wetting and drying and "avalanching"—important processes in the swash zone. This nonphysical erosion can be described as the natural tendency of the schemes to smear out steep bed slopes. To denote and reduce these numerical errors, new numerical methods are presented to address these limitations and the resulting model is applied to a set of laboratory-scale test problems. The shallow-water hypothesis limits the applicability of the model to the swash zone, so it is forced by a time series of water level and cross-shore velocity that accounts for surf zone wave

  3. Scaled photographs of surf over the full range of breaker sizes on the north shore of Oahu and Jaws, Maui, Hawaiian Islands, January 1998 - May 2004 (NODC Accession 0001753)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital surf photographs were scaled using surfers as height benchmarks to estimate the size of the breakers. Historical databases for surf height in Hawaii are...

  4. Associations between Functional Movement Screen scores and performance variables in surf athletes.

    Science.gov (United States)

    Ferreira da Silva, Bruno A; Clemente, Filipe M; Lourenço Martins, Fernando M

    2017-02-22

    Functional Movement Screen (FMS) have been used to assess the movement patterns in daily sports practice. Some associations between FMS scores and physical variables have been found in some sports. Nevertheless, no study was conducted in surf. Eighteen surf athletes (11 male) participated in the study (18.3 ± 6.3 y; 60.0 ± 9.6 kg; 168.6 ± 8.1 cm). All participants completed anthropometrics, Knee to Wall test, Functional Movement Screen, Isometric Knee Extension, Handgrip, Squat and Countermovement Jump. Based on that, this study investigated: 1) the variance of FMS scores between gender; 2) the association between FMS scores and physical variables of strength of upper and lower limbs, power of lower limbs and anthropometric variables; and 3) which FMS scores best explain the physical performance variables. The analysis of comparison between gender of each item of FMS showed significant statistical differences only in Trunk Stability Push-Up (p = 0.01, ES=0.141). Kendall's Tau b correlation test between FMS scores and physical variables, revealed significant associations. After performed the stepwise multiple linear regression FMS Deep Squat and Trunk Stability Push-Up explains 57% of Knee to Wall test - right side and the model is statistically significant (F(2. 15) = 13.097; p-value = 0.001). In Squat Jump (height) the results show that FMS Trunk Stability Push-Up explains 50.3% of this dimension and the model is statistically significant (F(1. 16) = 18.182; p-value = 0.001). FMS individual scores seems to better explain physical variables than total score. Only Trunk Stability Push-Up test seems to be a reliable indicator to predict physical performance in surf athletes.

  5. Effects of bed-load movement on flow resistance over bed forms

    Indian Academy of Sciences (India)

    Mohammad Hossein Omid; Masoud Karbasi; Javad Farhoudi

    2010-12-01

    The effect of bed-load transport on flow resistance of alluvial channels with undulated bed was experimentally investigated. The experiments were carried out in a tilting flume 250 mm wide and 12·5 m long with glass-sides of rectangular cross-section and artificial dune shaped floor that was made from Plexi-glass. Steady flow of clear as against sediment-laden water with different flow depths and velocities were studied in the experiments with a fine sand ($d_{50} =$ 0·5 mm). The results indicate that the transport of fine particles ($d_{50} =$ 0·5 mm) can decrease the friction factor by 22% and 24% respectively for smooth and rough beds. Increasing the bed-load size ($d_{50} =$ 2·84 mm) can decrease the friction factor by 32% and 39% respectively for smooth and rough beds. The decrease in flow resistance is due to filling up of the troughs of dunes. This separation zone is responsible for increasing the flow resistance. On the upstream side of dunes condition is similar to plane bed. Presence of bed-load causes to increase the shear velocity and hence increasing flow resistance. But decreasing in flow resistance is more and it causes to decrease the total flow resistance. Grains saturated the troughs in the bed topography, effectively helping in smoothening of bed irregularities.

  6. QSAR study and VolSurf characterization of anti-HIV quinolone library

    Science.gov (United States)

    Filipponi, Enrica; Cruciani, Gabriele; Tabarrini, Oriana; Cecchetti, Violetta; Fravolini, Arnaldo

    2001-03-01

    Antiviral quinolones are promising compounds in the search for new therapeutically effective agents for the treatment of AIDS. To rationalize the SAR for this new interesting class of anti-HIV derivatives, we performed a 3D-QSAR study on a library of 101 6-fluoro and 6-desfluoroquinolones, taken either from the literature or synthesized by us. The chemometric procedure involved a fully semiempirical minimization of the molecular structures by the AMSOL program, which takes into account the solvatation effect, and their 3D characterization by the VolSurf/GRID program. The QSAR analysis, based on PCA and PLS methods, shows the key structural features responsible for the antiviral activity.

  7. Comparison Between Surf and Multi-Shock Forest Fire High Explosive Burn Models

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, Nicholas Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-18

    PAGOSA1 has several different burn models used to model high explosive detonation. Two of these, Multi-Shock Forest Fire and Surf, are capable of modeling shock initiation. Accurately calculating shock initiation of a high explosive is important because it is a mechanism for detonation in many accident scenarios (i.e. fragment impact). Comparing the models to pop-plot data give confidence that the models are accurately calculating detonation or lack thereof. To compare the performance of these models, pop-plots2 were created from simulations where one two cm block of PBX 9502 collides with another block of PBX 9502.

  8. Mimicking a SURF1 allele reveals uncoupling of cytochrome c oxidase assembly from translational regulation in yeast.

    Science.gov (United States)

    Reinhold, Robert; Bareth, Bettina; Balleininger, Martina; Wissel, Mirjam; Rehling, Peter; Mick, David U

    2011-06-15

    Defects in mitochondrial energy metabolism lead to severe human disorders, mainly affecting tissues especially dependent on oxidative phosphorylation, such as muscle and brain. Leigh Syndrome describes a severe encephalomyopathy in infancy, frequently caused by mutations in SURF1. SURF1, termed Shy1 in Saccharomyces cerevisiae, is a conserved assembly factor for the terminal enzyme of the respiratory chain, cytochrome c oxidase. Although the molecular function of SURF1/Shy1 is still enigmatic, loss of function leads to cytochrome c oxidase deficiency and reduced expression of the central subunit Cox1 in yeast. Here, we provide insights into the molecular mechanisms leading to disease through missense mutations in codons of the most conserved amino acids in SURF1. Mutations affecting G(124) do not compromise import of the SURF1 precursor protein but lead to fast turnover of the mature protein within the mitochondria. Interestingly, an Y(274)D exchange neither affects stability nor localization of the protein. Instead, SURF1(Y274D) accumulates in a 200 kDa cytochrome c oxidase assembly intermediate. Using yeast as a model, we demonstrate that the corresponding Shy1(Y344D) is able to overcome the stage where cytochrome c oxidase assembly links to the feedback regulation of mitochondrial Cox1 expression. However, Shy1(Y344D) impairs the assembly at later steps, most apparent at low temperature and exhibits a dominant-negative phenotype upon overexpression. Thus, exchanging the conserved tyrosine (Y(344)) with aspartate in yeast uncouples translational regulation of Cox1 from cytochrome c oxidase assembly and provides evidence for the dual functionality of Shy1.

  9. Analysis of Wave Predictions from the Coastal Model Test Bed using Operationally Estimated Bathymetry

    Science.gov (United States)

    Bak, S.; Smith, J. M.; Hesser, T.; Bryant, M. A.

    2016-12-01

    Near-coast wave models are generally validated with relatively small data sets that focus on analytical solutions, specialized experiments, or intense storms. Prior studies have compiled testbeds that include a few dozen experiments or storms to validate models (e.g., Ris et al. 2002), but few examples exist that allow for continued model evaluation in the nearshore and surf-zone in near-realtime. The limited nature of these validation sets is driven by a lack of high spatial and temporal resolution in-situ wave measurements and the difficulty in maintaining these instruments on the active profile over long periods of time. The US Army Corps of Engineers Field Research Facility (FRF) has initiated a Coastal Model Test-Bed (CMTB), which is an automated system that continually validates wave models (with morphological and circulation models to follow) utilizing the rich data set of oceanographic and bathymetric measurements collected at the FRF. The FRF's cross-shore wave array provides wave measurements along a cross-shore profile from 26 m of water depth to the shoreline, utilizing various instruments including wave-rider buoys, AWACs, aquadopps, pressure gauges, and a dune-mounted lidar (Brodie et al. 2015). This work uses the CMTB to evaluate the performance of a phase-averaged numerical wave model, STWAVE (Smith 2007, Massey et al. 2011) over the course of a year at the FRF in Duck, NC. Additionally, from the BathyDuck Experiment in October 2015, the CMTB was used to determine the impact of applying the depth boundary condition for the model from monthly acoustic bathymetric surveys in comparison to hourly estimates using a video-based inversion method (e.g., cBathy, Holman et al. 2013). The modeled wave parameters using both bathymetric boundary conditions are evaluated using the FRF's cross-shore wave array and two additional cross-shore arrays of wave measurements in 2 to 4 m water depth from BathyDuck in Fall, 2015.

  10. Tapered bed bioreactor

    Science.gov (United States)

    Scott, Charles D.; Hancher, Charles W.

    1977-01-01

    A vertically oriented conically shaped column is used as a fluidized bed bioreactor wherein biologically catalyzed reactions are conducted in a continuous manner. The column utilizes a packing material a support having attached thereto a biologically active catalytic material.

  11. Bed Bugs FAQs

    Science.gov (United States)

    ... Bed bugs have been found in five-star hotels and resorts and their presence is not determined ... sleep. These areas include apartments, shelters, rooming houses, hotels, cruise ships, buses, trains, and dorm rooms. They ...

  12. Moving-bed sorbents

    Energy Technology Data Exchange (ETDEWEB)

    Ayala, R.E.; Gupta, R.P.; Chuck, T.

    1995-12-01

    The objective of this program is to develop mixed-metal oxide sorbent formulations that are suitable for moving-bed, high-temperature, desulfurization of coal gas. Work continues on zinc titanates formulations and Z-sorb III sorbent.

  13. Bed Bug Information Clearinghouse

    Science.gov (United States)

    Its purpose is to help states, communities, and consumers in efforts to prevent and control bed bug infestations. Currently includes only reviewed material from federal/state/local government agencies, extension services, and universities.

  14. Bed Bug Tips

    Science.gov (United States)

    How to deal with bed bugs in one printable page. Ten tips include ensuring correct insect identification, reducing clutter, understand integrated pest management, using mattress and box spring encasements, and heat treatment.

  15. Simulated moving bed system for CO.sub.2 separation, and method of same

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Jeannine Elizabeth; Copeland, Robert James; Lind, Jeff; Leta, Daniel P.; McCall, Patrick P.

    2016-09-20

    A system and method for separating and/or purification of CO.sub.2 gas from a CO.sub.2 feed stream is described. The system and method include a plurality of fixed sorbent beds, adsorption zones and desorption zones, where the sorbent beds are connected via valve and lines to create a simulated moving bed system, where the sorbent beds move from one adsorption position to another adsorption position, and then into one regeneration position to another regeneration position, and optionally back to an adsorption position. The system and method operate by concentration swing adsorption/desorption and by adsorptive/desorptive displacement.

  16. Deleterious Thermal Effects Due To Randomized Flow Paths in Pebble Bed, and Particle Bed Style Reactors

    Science.gov (United States)

    Moran, Robert P.

    2013-01-01

    A review of literature associated with Pebble Bed and Particle Bed reactor core research has revealed a systemic problem inherent to reactor core concepts which utilize randomized rather than structured coolant channel flow paths. For both the Pebble Bed and Particle Bed Reactor designs; case studies reveal that for indeterminate reasons, regions within the core would suffer from excessive heating leading to thermal runaway and localized fuel melting. A thermal Computational Fluid Dynamics model was utilized to verify that In both the Pebble Bed and Particle Bed Reactor concepts randomized coolant channel pathways combined with localized high temperature regions would work together to resist the flow of coolant diverting it away from where it is needed the most to cooler less resistive pathways where it is needed the least. In other words given the choice via randomized coolant pathways the reactor coolant will take the path of least resistance, and hot zones offer the highest resistance. Having identified the relationship between randomized coolant channel pathways and localized fuel melting it is now safe to assume that other reactor concepts that utilize randomized coolant pathways such as the foam core reactor are also susceptible to this phenomenon.

  17. Active depinning of bacterial droplets: the collective surfing of Bacillus subtilis

    Science.gov (United States)

    Hennes, Marc; Tailleur, Julien; Daerr, Adrian

    2016-11-01

    How systems are endowed with migration capacity is a fascinating question with implications ranging from the design of novel active systems to the control of microbial populations. Bacteria, which can be found in a variety of environments, have developed among the richest set of locomotion mechanisms both at the microscopic and collective levels. Here, we uncover experimentally a new mode of collective bacterial motility in humid environment through the depinning of bacterial droplets. While capillary forces are notoriously enormous at the bacterial scale, even capable of pinning water droplets of millimetric size on inclined surfaces, we show that bacteria are able to harness a variety of mechanisms to unpin contact lines, hence inducing a collective sliding of the colony. Contrary to flagella-dependent migration modes like swarming we show that this much faster colony surfing still occurs in mutant strains of Bacillus subtilis lacking flagella. The diversity of mechanisms involved in the active unpinning seen in our experiments suggests that collective surfing should be a generic mode of migration of microorganisms in humid environments. Bacttern Grant.

  18. Comparison of impact forces, accelerations and ankle range of motion in surfing-related landing tasks.

    Science.gov (United States)

    Lundgren, Lina E; Tran, Tai T; Nimphius, Sophia; Raymond, Ellen; Secomb, Josh L; Farley, Oliver R L; Newton, Robert U; Sheppard, Jeremy M

    2016-01-01

    This study aimed to describe the impact forces, accelerations and ankle range of motion in five different landing tasks that are used in training and testing for competitive surfing athletes, to assist coaches in the prescription of landing task progression and monitoring training load. Eleven competitive surfing athletes aged 24 ± 7 years participated, and inertial motion sensors were fixed to the anterior aspect of the feet, mid-tibial shafts, sacrum and eighth thoracic vertebrae on these athletes. Three tasks were performed landing on force plates and two tasks in a modified gymnastics set-up used for land-based aerial training. Peak landing force, resultant peak acceleration and front and rear side ankle dorsiflexion ranges of motion during landing were determined. The peak acceleration was approximately 50% higher when performing aerial training using a mini-trampoline and landing on a soft-density foam board, compared to a similar landing off a 50 cm box. Furthermore, the ankle ranges of motion during the gymnastic type landings were significantly lower than the other landing types (P ≤ 0.05 and P ≤ 0.001), for front and rear sides, respectively. Conclusively, increased task complexity and specificity of the sport increased the tibial peak acceleration, indicating greater training load.

  19. Mutations of SURF-1 in Leigh disease associated with cytochrome c oxidase deficiency.

    Science.gov (United States)

    Tiranti, V; Hoertnagel, K; Carrozzo, R; Galimberti, C; Munaro, M; Granatiero, M; Zelante, L; Gasparini, P; Marzella, R; Rocchi, M; Bayona-Bafaluy, M P; Enriquez, J A; Uziel, G; Bertini, E; Dionisi-Vici, C; Franco, B; Meitinger, T; Zeviani, M

    1998-12-01

    Leigh disease associated with cytochrome c oxidase deficiency (LD[COX-]) is one of the most common disorders of the mitochondrial respiratory chain, in infancy and childhood. No mutations in any of the genes encoding the COX-protein subunits have been identified in LD(COX-) patients. Using complementation assays based on the fusion of LD(COX-) cell lines with several rodent/human rho0 hybrids, we demonstrated that the COX phenotype was rescued by the presence of a normal human chromosome 9. Linkage analysis restricted the disease locus to the subtelomeric region of chromosome 9q, within the 7-cM interval between markers D9S1847 and D9S1826. Candidate genes within this region include SURF-1, the yeast homologue (SHY-1) of which encodes a mitochondrial protein necessary for the maintenance of COX activity and respiration. Sequence analysis of SURF-1 revealed mutations in numerous DNA samples from LD(COX-) patients, indicating that this gene is responsible for the major complementation group in this important mitochondrial disorder.

  20. New approach for measuring 3D space by using Advanced SURF Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Youm, Minkyo; Min, Byungil; Suh, Kyungsuk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Backgeun [Sungkyunkwan Univ., Suwon (Korea, Republic of)

    2013-05-15

    The nuclear disasters compared to natural disaster create a more extreme condition for analyzing and evaluating. In this paper, measuring 3D space and modeling was studied by simple pictures in case of small sand dune. The suggested method can be used for the acquisition of spatial information by robot at the disaster area. As a result, these data are helpful for identify the damaged part, degree of damage and determination of recovery sequences. In this study we are improving computer vision algorithm for 3-D geo spatial information measurement. And confirm by test. First, we can get noticeable improvement of 3-D geo spatial information result by SURF algorithm and photogrammetry surveying. Second, we can confirm not only decrease algorithm running time, but also increase matching points through epi polar line filtering. From the study, we are extracting 3-D model by open source algorithm and delete miss match point by filtering method. However on characteristic of SURF algorithm, it can't find match point if structure don't have strong feature. So we will need more study about find feature point if structure don't have strong feature.

  1. Preventing Shoulder-Surfing Attack with the Concept of Concealing the Password Objects’ Information

    Directory of Open Access Journals (Sweden)

    Peng Foong Ho

    2014-01-01

    Full Text Available Traditionally, picture-based password systems employ password objects (pictures/icons/symbols as input during an authentication session, thus making them vulnerable to “shoulder-surfing” attack because the visual interface by function is easily observed by others. Recent software-based approaches attempt to minimize this threat by requiring users to enter their passwords indirectly by performing certain mental tasks to derive the indirect password, thus concealing the user’s actual password. However, weaknesses in the positioning of distracter and password objects introduce usability and security issues. In this paper, a new method, which conceals information about the password objects as much as possible, is proposed. Besides concealing the password objects and the number of password objects, the proposed method allows both password and distracter objects to be used as the challenge set’s input. The correctly entered password appears to be random and can only be derived with the knowledge of the full set of password objects. Therefore, it would be difficult for a shoulder-surfing adversary to identify the user’s actual password. Simulation results indicate that the correct input object and its location are random for each challenge set, thus preventing frequency of occurrence analysis attack. User study results show that the proposed method is able to prevent shoulder-surfing attack.

  2. MOD_FreeSurf2D: a Surface Fluid Flow Simulation Model for Rivers, Streams, and Shallow Estuaries

    Science.gov (United States)

    Martin, N.; Gorelick, S. M.

    2003-12-01

    The MOD_FreeSurf2D, Modular Free Surface Flow in Two-Dimensions, computer model simulates free surface fluid flow in streams, rivers, and shallow estuaries under the assumptions of a well-mixed water column, a small water depth to width ratio, and a hydrostatic pressure distribution. The dependent variables in the model are free surface elevation, which provides total water depth, and fluid velocity. Primary advantages of MOD_FreeSurf2D relative to other two-dimensional models are a stable and computationally efficient numerical representation and a transparent representation of wetting and drying of the simulation domain. MOD_FreeSurf2D approximates the depth-averaged, shallow water equations with a finite volume, semi-implicit, semi-Lagrangian numerical representation similar to the TRIM method (Casulli, 1990; Casulli and Cheng, 1992; Casulli, 1999). The semi-implicit, semi-Lagrangian approach is computationally efficient because time steps can exceed the Courant-Friedrich-Lewy (CFL) stability criterion without significant accuracy degradation (Robert, 1982; Casulli, 1990). The rectangular, Arakawa C-grid, finite-volume layout allows flooding and drying in response to changing flow conditions without prior channel specification or closed boundary specification. Open boundary conditions available in MOD_FreeSurf2D are specified flux, specified total water depth, specified velocity, radiation free surface, and radiation velocity. MOD_FreeSurf2D requires initial topography, undisturbed water depth, and Manning's roughness coefficient. MOD_FreeSurf2D simulated results are shown to converge to the semi-empirical solution for a simple straight channel case. Two applications demonstrate the accuracy of MOD_FreeSurf2D. The first application is the evolution of water depth in the dambreak-style flume experiment of Bellos et al. (1992). In this case, MOD_FreeSurf2D accurately simulates the changing water depth in the flume during the experiment and models the wetting of

  3. Pebble Bed Reactor Dust Production Model

    Energy Technology Data Exchange (ETDEWEB)

    Abderrafi M. Ougouag; Joshua J. Cogliati

    2008-09-01

    The operation of pebble bed reactors, including fuel circulation, can generate graphite dust, which in turn could be a concern for internal components; and to the near field in the remote event of a break in the coolant circuits. The design of the reactor system must, therefore, take the dust into account and the operation must include contingencies for dust removal and for mitigation of potential releases. Such planning requires a proper assessment of the dust inventory. This paper presents a predictive model of dust generation in an operating pebble bed with recirculating fuel. In this preliminary work the production model is based on the use of the assumption of proportionality between the dust production and the normal force and distance traveled. The model developed in this work uses the slip distances and the inter-pebble forces computed by the authors’ PEBBLES. The code, based on the discrete element method, simulates the relevant static and kinetic friction interactions between the pebbles as well as the recirculation of the pebbles through the reactor vessel. The interaction between pebbles and walls of the reactor vat is treated using the same approach. The amount of dust produced is proportional to the wear coefficient for adhesive wear (taken from literature) and to the slip volume, the product of the contact area and the slip distance. The paper will compare the predicted volume with the measured production rates. The simulation tallies the dust production based on the location of creation. Two peak production zones from intra pebble forces are predicted within the bed. The first zone is located near the pebble inlet chute due to the speed of the dropping pebbles. The second peak zone occurs lower in the reactor with increased pebble contact force due to the weight of supported pebbles. This paper presents the first use of a Discrete Element Method simulation of pebble bed dust production.

  4. A study on Heat Transfer for Immersed Tube in Internally Circulating Fluidized Bed

    Institute of Scientific and Technical Information of China (English)

    TianWendong; HaoJinhua; 等

    1999-01-01

    Heat transfer coefficients for horizontally immersed tubes have been studied in a model of ICFB(Inter-nally Circulating Fluidized Bed).The characteristics in ICFB were found to be significantly different from those in bubbing bed.There is a flowing zone with high velocity in the heat exchange zone.The heat transfer coefficients strongly depend on the fluidized velocity in the flowing zone.The heat exchange process and suitable bed temperature can be controlled according to this feature.Based on the results of the experiments,a formulation for heat transfer has been developed.

  5. Norman-based Isolated Data Systems allows users to surf the Internet with no traceable IP address

    CERN Multimedia

    2004-01-01

    "Patented by Norman-based Isolated Data Systems, John Doe is an anonymous proxy server that allows users to surf the Internet exactly as before, with one exception - they are identifiable only as John Doe, with no traceable IP address, which means no tracking, no identification and no profile building" ( 1/2 page)

  6. Dependence of the surf zone aerosol on wind direction and wind speed at a coastal site on the Baltic Sea

    Directory of Open Access Journals (Sweden)

    Tymon Zieliński

    2003-09-01

    Full Text Available Since 1992 lidar-based measurements have been carried out under various meteorological conditions and at various times of the year. The aerosol optical properties were determined in the marine boundary layer as a function of altitude using such factors as wind direction, duration and velocity and aerosol size distribution and concentration. It was confirmed that in all cases, the total aerosol concentration, size distribution and aerosol extinction increase with wind speed but decrease with altitude. In the range of wind velocities from 1 to 15 m s-1 the mean aerosol optical thickness of the atmosphere (VIS obtained from the lidar varied from 0.1 to 0.38 for offshore winds and from 0.01 to about 0.1 for onshore winds, while the Ångström parameter for VIS oscillated around 0.65 for onshore winds and around 1 for offshore winds. Both parameters depended strongly on the history of the air mass above the Baltic Sea. Such aerosol optical thicknesses are in agreement with those obtained by other researchers in the Baltic Sea area.

  7. Interaction between breaking/broken waves and infragravity-scale phenomena to control sediment suspension transport in the surf zone

    CSIR Research Space (South Africa)

    Smith, GG

    2002-07-30

    Full Text Available of instrumentation, ?ume geometry, water-levels, wave conditions tested, etc. reference is made to Sanchez-Arcilla et al. (1994). For the purpose of the present study, use was primarily made of instrumentation attached to a roving car- riage deployed at various... the carriage to measure beach pro?les (San- chez-Arcilla et al., 1994). The present study makes use of measurements taken during the second series of tests at LIP11D (Tests 2A and 2B). Test 2A was commenced with a Dean-type beach pro?le, with a dune included...

  8. Development and Testing of a Hybrid Wheg (trademark)-Mobile Platform for Autonomous Surf-Zone Operations

    Science.gov (United States)

    2011-12-01

    transmitted to the front Wheg through a 0.5 inch driveshaft mounted internally to a 1 inch suspension shaft and then through a set of geared pulleys ...that engages additional teeth on the smaller pulley . The final gear ratio is 46:1. The Whegs turn at 178 RPM under no load and nominal motor voltage...can minimize load friction and inertia by the proper selection of the gear ratio N. Jeq = Ja + 1 N2 Jl (2.8) Feq = Fa + 1 N2 Fl (2.9) 2.3 Quasi

  9. Bed bug deterrence

    Directory of Open Access Journals (Sweden)

    Haynes Kenneth F

    2010-09-01

    Full Text Available Abstract A recent study in BMC Biology has determined that the immature stage of the bed bug (the nymph signals its reproductive status to adult males using pheromones and thus avoids the trauma associated with copulation in this species. The success of this nymphal strategy of deterrence is instructive. Against the background of increasing problems with bed bugs, this research raises the question whether pheromones might be used to control them. See research article http://www.biomedcentral.com/1741-7007/8/121

  10. in Spouted Bed

    Directory of Open Access Journals (Sweden)

    Bronislaw Buczek

    2013-01-01

    Full Text Available Samples of active coke, fresh and spent after cleaning flue gases from communal waste incinerators, were investigated. The outer layers of both coke particles were separately removed by comminution in a spouted bed. The samples of both active cokes were analysed by means of densities, mercury porosimetry, and adsorption technique. Remaining cores were examined to determine the degree of consumption of coke by the sorption of hazardous emissions (SO2, HCl, and heavy metals through its bed. Differences in contamination levels within the porous structure of the particles were estimated. The study demonstrated the effectiveness of commercial active coke in the cleaning of flue gases.

  11. The Safety of Hospital Beds

    Science.gov (United States)

    Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K.; Bloswick, Donald

    2015-01-01

    To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients’ ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients’ use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated. PMID:28462302

  12. Epidemlology of exercise-related transient abdominal pain at the Sydney City to Surf community run.

    Science.gov (United States)

    Morton, D P; Richards, D; Callister, R

    2005-06-01

    A questionnaire was administered to 848 participants (76% runners, 24% walkers) at the conclusion of the 14 km City to Surf community run in order to investigate their experience of exercise-related transient abdominal pain (ETAP). Twenty-seven percent of respondents reported experiencing ETAP during the event, with the condition reported more frequently (pnutritional content of the pre-event meal did not influence the experience of ETAP. Sufferers of ETAP were more likely to experience nausea (r = 0.12, p< 0.01) and report shoulder tip pain (r= 0.14, p< 0.01). The results indicate that ETAP is a commonly experienced problem and provide insights into the cause of the complaint.

  13. 3D reconstruction of a human heart fascicle using SurfDriver

    Science.gov (United States)

    Rader, Robert J.; Phillips, Steven J.; LaFollette, Paul S., Jr.

    2000-06-01

    The Temple University Medical School has a sequence of over 400 serial sections of adult normal ventricular human heart tissue, cut at 25 micrometer thickness. We used a Zeiss Ultraphot with a 4x planapo objective and a Pixera digital camera to make a series of 45 sequential montages to use in the 3D reconstruction of a fascicle (muscle bundle). We wrote custom software to merge 4 smaller image fields from each section into one composite image. We used SurfDriver software, developed by Scott Lozanoff of the University of Hawaii and David Moody of the University of Alberta, for registration, object boundary identification, and 3D surface reconstruction. We used an Epson Stylus Color 900 printer to get photo-quality prints. We describe the challenge and our solution to the following problems: image acquisition and digitization, image merge, alignment and registration, boundary identification, 3D surface reconstruction, 3D visualization and orientation, snapshot, and photo-quality prints.

  14. Diarrhetic shellfish poisoning toxin esters in Danish blue mussels and surf clams

    DEFF Research Database (Denmark)

    Jørgensen, Kevin; Scanlon, Sine Hedegaard; Jensen, L.B.

    2005-01-01

    Until recently, little focus was given to the presence of diarrhetic shellfish poisoning ( DSP) toxin esters in seafood products. However, during the last few years, the occurrence of a high percentage of esters of the total amount of DSP toxins present in some seafood products has been observed....... Samples of Danish surf clams ( Spisola spp.) and blue mussels ( Mytilus edulis) from 1999 - 2004 were analysed by liquid chromatography coupled with tandem mass spectrometry ( LC/ MS/ MS) for the presence of DSP toxin esters. The samples contained only okadaic acid and esters of okadaic acid. The level...... of okadaic acid esters of the total okadaic acid equivalents ranged from 21 to 86%, mean 59%. The probability of a high percentage of okadaic acid esters seems to increase with higher amounts of total okadaic acid equivalents in the bivalves. The large prevalence of DSP toxin esters are of particular...

  15. Phase speed of electrostatic waves: The critical parameter for efficient electron surfing acceleration

    CERN Document Server

    Dieckmann, M E; Parviainen, M; Shukla, P K; Sircombe, N J

    2006-01-01

    Particle acceleration by means of non-linear plasma wave interactions is of great topical interest. Accordingly, in this paper we focus on the electron surfing process. Self-consistent kinetic simulations, using both relativistic Vlasov and PIC (Particle In Cell) approaches, show here that electrons can be accelerated to highly relativistic energies (up to 100 m_e c^2) if the phase speed of the electrostatic wave is mildly relativistic (0.6c to 0.9c for the magnetic field strengths considered). The acceleration is strong because of relativistic stabilisation of the nonlinearly saturated electrostatic wave, seen in both relativistic Vlasov and PIC simulations. An inverse power law momentum distribution can arise for the most strongly accelerated electrons. These results are of relevance to observed rapid changes in the radio synchrotron emission intensities from microquasars, gamma ray bursts and other astrophysical objects that require rapid acceleration mechanisms for electrons.

  16. Phase speed of electrostatic waves: the critical parameter for efficient electron surfing acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Dieckmann, M E [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Sircombe, N J [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Parviainen, M [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Shukla, P K [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Dendy, R O [UKAEA Culham Division, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB (United Kingdom); Physics Department, University of Warwick, Coventry CV4 7AL (United Kingdom)

    2006-04-15

    Particle acceleration by means of nonlinear plasma wave interactions is of great topical interest. Accordingly, in this paper we focus on the electron surfing process. Self-consistent kinetic simulations, using both relativistic Vlasov and particle-in-cell (PIC) approaches, show here that electrons can be accelerated to highly relativistic energies (up to 100m{sub e}c{sup 2}) if the phase speed of the electrostatic wave is mildly relativistic (0.6c to 0.9c for the magnetic field strengths considered). The acceleration is strong because of relativistic stabilization of the nonlinearly saturated electrostatic wave, seen in both relativistic Vlasov and PIC simulations. An inverse power law momentum distribution can arise for the most strongly accelerated electrons. These results are of relevance to observed rapid changes in the radio synchrotron emission intensities from microquasars, gamma ray bursts and other astrophysical objects that require rapid acceleration mechanisms for electrons.

  17. Chemolithotrophy in the continental deep subsurface: Sanford Underground Research Facility (SURF, USA

    Directory of Open Access Journals (Sweden)

    Magdalena Rose Osburn

    2014-11-01

    Full Text Available The deep subsurface is an enormous repository of microbial life. However, the metabolic capabilities of these microorganisms and the degree to which they are dependent on surface processes are largely unknown. Due to the logistical difficulty of sampling and inherent heterogeneity, the microbial populations of the terrestrial subsurface are poorly characterized. In an effort to better understand the biogeochemistry of deep terrestrial habitats, we evaluate the energetic yield of chemolithotrophic metabolisms and microbial diversity in the Sanford Underground Research Facility (SURF in the former Homestake Gold Mine, SD, USA. Geochemical data, energetic modeling, and DNA sequencing were combined with principle component analysis to describe this deep (down to 8100 ft below surface, terrestrial environment. SURF provides access into an iron-rich Paleoproterozoic metasedimentary deposit that contains deeply circulating groundwater. Geochemical analyses of subsurface fluids reveal enormous geochemical diversity ranging widely in salinity, oxidation state (ORP 330 to -328 mV, and concentrations of redox sensitive species (e.g., Fe2+ from near 0 to 6.2 mg/L and ΣS2- from 7 to 2778 μg/L. As a direct result of this compositional buffet, Gibbs energy calculations reveal an abundance of energy for microorganisms from the oxidation of sulfur, iron, nitrogen, methane, and manganese. Pyrotag DNA sequencing reveals diverse communities of chemolithoautotrophs, thermophiles, aerobic and anaerobic heterotrophs, and numerous uncultivated clades. Extrapolated across the mine footprint, these data suggest a complex spatial mosaic of subsurface primary productivity that is in good agreement with predicted energy yields. Notably, we report Gibbs energy normalized both per mole of reaction and per kg fluid (energy density and find the later to be more consistent with observed physiologies and environmental conditions. Further application of this approach will

  18. Object Recognition System in Remote Controlled Weapon Station using SIFT and SURF Methods

    Directory of Open Access Journals (Sweden)

    Midriem Mirdanies

    2013-12-01

    Full Text Available Object recognition system using computer vision that is implemented on Remote Controlled Weapon Station (RCWS is discussed. This system will make it easier to identify and shoot targeted object automatically. Algorithm was created to recognize real time multiple objects using two methods i.e. Scale Invariant Feature Transform (SIFT and Speeded Up Robust Features (SURF combined with K-Nearest Neighbors (KNN and Random Sample Consensus (RANSAC for verification. The algorithm is designed to improve object detection to be more robust and to minimize the processing time required. Objects are registered on the system consisting of the armored personnel carrier, tanks, bus, sedan, big foot, and police jeep. In addition, object selection can use mouse to shoot another object that has not been registered on the system. Kinect™ is used to capture RGB images and to find the coordinates x, y, and z of the object. The programming language used is C with visual studio IDE 2010 and opencv libraries. Object recognition program is divided into three parts: 1 reading image from kinect™ and simulation results, 2 object recognition process, and 3 transfer of the object data to the ballistic computer. Communication between programs is performed using shared memory. The detected object data is sent to the ballistic computer via Local Area Network (LAN using winsock for ballistic calculation, and then the motor control system moves the direction of the weapon model to the desired object. The experimental results show that the SIFT method is more suitable because more accurate and faster than SURF with the average processing time to detect one object is 430.2 ms, two object is 618.4 ms, three objects is 682.4 ms, and four objects is 756.2 ms. Object recognition program is able to recognize multi-objects and the data of the identified object can be processed by the ballistic computer in realtime.

  19. MULTISTAGE FLUIDIZED BED REACTOR

    Science.gov (United States)

    Jonke, A.A.; Graae, J.E.A.; Levitz, N.M.

    1959-11-01

    A multistage fluidized bed reactor is described in which each of a number of stages is arranged with respect to an associated baffle so that a fluidizing gas flows upward and a granular solid downward through the stages and baffles, whereas the granular solid stopsflowing downward when the flow of fluidizing gas is shut off.

  20. Fluidized bed combustion chamber

    Energy Technology Data Exchange (ETDEWEB)

    Kullendorff, A.; Wikner, J.

    1985-03-25

    The chamber is confined in a pressure vessel. The lower part of the chamber has tilted parallel gutters up to the height of the fluidized bed. The slope of the gutter walls is 5 degrees-15 degrees and the top area of the gutters is 1.3 to 3 times larger than their bottom.

  1. Bed Bug Myths

    Science.gov (United States)

    Learn the truth about bed bugs, such as how easy they are to see with the naked eye, their preferred habitat, whether they transmit diseases, their public health effects, and whether pesticides are the best way to deal with an infestation.

  2. Surviving Bed Rest

    Science.gov (United States)

    ... your pregnancy — and your bed rest start a family tree that you can share with your child someday firm up your baby-name choices; use books and websites for ideas organize photo albums read anything — ... people (friends and family) whom you know will probably give gifts build ...

  3. Chinese Sign Language Recognition Method Based on Depth Image Information and SURF-BoW%基于深度信息和SURF-BoW的中国手语识别算法

    Institute of Scientific and Technical Information of China (English)

    杨全; 彭进业

    2014-01-01

    为实现视频中手语的准确识别,提出一种基于深度图连续自适应均值漂移( DI_CamShift)和加速强健特征词包( SURF-BoW)的中国手语识别算法.该算法将Kinect作为手语视频采集设备,在获取彩色视频的同时得到其深度信息.算法首先计算深度图像中手语手势的主轴方向角和质心位置,通过调整搜索窗口对手势准确跟踪;然后使用基于深度积分图像的OTSU算法分割手势并提取其加速强健特征( SURF),进而构建SURF-BoW作为手语特征并使用SVM识别.通过实验验证该算法在单个手语字母上的最好识别率为99.37%,平均识别率为96.24%.%To realize the accurate recognition of sign language in the video, an algorithm based on depth image CamShift( DI_CamShift) and speeded up robust features-bag of words ( SURF-BoW) is proposed. Kinect is used as the sign language video capture device to obtain both of the color video and depth image information of sign language gestures. Firstly, spindle direction angle and mass center position of the depth images are calculated and the search window is adjusted to track gesture. Next, an OTSU algorithm based on depth integral image is used for gesture segmentation, and the SURF features are extracted. Finally, SURF-BoW is built as the feature of sign language and SVM is utilized for recognition. The best recognition rate of single manual alphabet reaches 99 . 37%, and the average recognition rate is up to 96 . 24%.

  4. The Multi-Scale Response of Water Quality, Biodiversity and Carbon Sequestration to Coupled Macronutrient Cycling from Source to Sea: TURF2SURF

    Science.gov (United States)

    Wade, Andrew; Emmett, Bridget; Jago, Colin; Stutter, Marc; Biggs, Jeremy

    2016-04-01

    Turf2Surf is a large, multi-disciplinary project that aims to test the hypothesis that the spatial and temporal patterns of water quality, C sequestration and biodiversity are better explained through the large-scale coupling of C, N and P cycles than by single cycle, single system approaches. To achieve this, a catchment-scale study of the River Conwy (349 km2) in Wales is being done with emphasis on determining when, where and how coupled macronutrient (C, N, P) cycling occurs in the biogeochemical hot-spots of the soils, the riparian zone, instream and in the river-estuarine transition zone. A major integrated measurement programme is now largely complete. New data are being analysed to understand which soil properties have greatest influence on above and below-ground productivity including plant traits and how microbial processing is controlled by stoichiometry and nutrient priming. Within the stream network, new understanding is being produced on the in-river algal and whole ecosystem (metabolic) response to CNP additions and the factors affecting the fate and cycling of organic matter. In the estuary, initial results indicate a subsurface jet is causing stratification and a velocity anomaly has been observed. Both are important in terms of suspended matter transport and floc break-up. An integrated model is being built to describe the soil-atmosphere-vegetation processes which is linked, firstly, to flow and water quality models that describe the CNP flux transport and transformations from the headwaters to the estuary and, secondly, to biodiversity models. The purpose of the integrated model is to quantify how coupled CNP cycles may respond to environmental change and thereby affect C sequestration, water quality and biodiversity in the future. The team are now in the major phase of data synthesis and model development and are interested in linking with similar studies involving coupled CNP cycles across the atmospheric

  5. Bathing a patient in bed

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000427.htm Bathing a patient in bed To use the sharing features on this page, please enable JavaScript. Some patients cannot safely leave their beds to bathe. For ...

  6. VA National Bed Control System

    Data.gov (United States)

    Department of Veterans Affairs — The VA National Bed Control System records the levels of operating, unavailable and authorized beds at each VAMC, and it tracks requests for changes in these levels....

  7. A randomised crossover comparison of manikin ventilation through Soft Seal®, i‐gel™ and AuraOnce™ supraglottic airway devices by surf lifeguards

    National Research Council Canada - National Science Library

    Adelborg, K; Al‐Mashhadi, R. H; Nielsen, L. H; Dalgas, C; Mortensen, M. B; Løfgren, B

    2014-01-01

    Forty surf lifeguards attempted to ventilate a manikin through one out of three supraglottic airways inserted in random order: the Portex ® Soft Seal ® ; the Intersurgical ® i‐gel™; and the Ambu ® AuraOnce...

  8. Effect of Faulting on Ordovician Carbonate Buried-Hill Reservoir Beds in Hetianhe Gas Field,Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    Lü Xiuxiang; Bai Zhongkai; Li Jianjiao; Wang Weiguang; Fu Hui; Wang Qinghua

    2008-01-01

    Ordovician carbonate buried-hill reservoir beds in the Hetianhe (和田河) gas field,located in the Mazhatage (玛扎塔格) structural belt on the southern margin of the Bachu (巴楚) faulted uplift,southwestern Tarim basin,were studied.Based on field survey,core and slice observation,the general characteristics of carbonate buried-hill reservoir beds and specifically Ordovician carbonate buried-hill reservoir beds in the Hetianhe gas field were discussed.The karst zone of the reservoir beds in Hetianhe gas field was divided into superficial karst zone,vertical infiltration karst zone,lower subsurface flow karst zone,and deep sluggish flow zone from top to bottom.The effects of faulting on Ordovician carbonate buried-hill reservoir beds in the Hetianhe gas field were obvious.The faulting intensified the karstification and increased the depth of denudation.Faulting and subsequent fracture growth modified the reservoir beds and improved the physical property and quality of the reservoir beds.Moreover,faulting enhanced the development of the dissolution holes and fractures and increased the thickness of the effective reservoir beds.Meanwhile,faulting made the high porosity-permeability carbonate belts,which created conditions for the hydrocarbon accumulation,develop near the fault zone.

  9. Investigation of radiative heat transfer in fixed bed biomass furnaces

    Energy Technology Data Exchange (ETDEWEB)

    T. Klason; X.S. Bai; M. Bahador; T.K. Nilsson; B. Sunden [Lund Institute of Technology, Lund (Sweden). Division of Fluid Mechanics

    2008-08-15

    This paper presents an investigation of the radiative heat transfer process in two fixed bed furnaces firing biomass fuels and the performance of several widely used models for calculation of radiative heat transfer in the free-room of fixed bed furnaces. The effective mean grey gas absorption coefficients are calculated using an optimised version of the exponential wide band model (EWBM) based on an optical mean beam length. Fly-ash and char particles are taken into account using Mie scattering. In the investigated updraft small-scale fixed bed furnace radiative transfer carries heat from the bed to the free-room, whereas in the cross-current bed large-scale industry furnace, radiative transfer brings heat from the hot zones in the free-room to the drying zone of the bed. Not all the investigated models can predict these heat transfer trends, and the sensitivity of results to model parameters is fairly different in the two furnaces. In the small-scale furnace, the gas absorption coefficient predicted by using different optical lengths has great impact on the predicted temperature field. In the large-scale furnaces, the predicted temperature field is less sensitive to the optical length. In both furnaces, with the same radiative properties, the low-computational-cost P1 model predicts a temperature field in the free-room similar to that by the more time consuming SLW model. In general, the radiative heat transfer rates to the fuel bed are not very sensitive to the radiative properties, but they are sensitive to the different radiative heat transfer models. For a realistic prediction of the radiative heat transfer rate to the fuel bed or to the walls, more computationally demanding models such as the FGG or SLW models should be used. 37 refs., 7 figs., 2 tabs.

  10. Geomechanics of bedded salt

    Energy Technology Data Exchange (ETDEWEB)

    Serata, S.; Milnor, S.W.

    1979-06-08

    Creep data from the literature search is reinterpreted by SGI, resulting in a better understanding of the temperature and stress state dependence of the octahedral creep rate and the octahedral shear strength. The concept of a transition strength between the elastic and the plastic states is in agreement with the data. The elastic and rheological properties of salt are described, and a set of constitutive equations is presented. The dependence of material properties on parameters such as temperature is considered. Findings on the permeability of salt are summarized, and the in-situ behavior of openings in bedded salt is described based on extensive engineering experience. A stress measuring system utilizing a finite element computer code is discussed. Geological factors affecting the stability of salt openings are considered, and the Stress Control Technique for designing stable openings in bedded salt formations is explained.

  11. Virtual Test Bed

    Science.gov (United States)

    2016-06-07

    project is to develop a benchmark system for evaluating models for predicting the characteristics of ocean wind waves. SCIENTIFIC OBJECTIVES A...transformation-scale models (i.e. models which treat the physics of waves propagating from offshore areas into the coastline). Each phase is further divided...to be assembled within the virtual test bed. Wind fields for running these tests will be obtained from Oceanweather, Inc. from a separate ONR

  12. Circulating fluidized bed coal-saving optimization control method

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Tengfei; Li, Dewei; Xi, Yugeng; Zhou, Wu [Shanghai Jiao Tong Univ., Shanghai (China). Dept. of Automation; Ministry of Education, Shanghai (China). Key Lab. of System Control and Information Processing; Yin, Debin [Shanghai Xinhua Control Technology (Group) Co., Ltd., Shanghai (China)

    2013-07-01

    The circulating fluidized bed boiler is widely used in thermal power plants. With the proposal of energy-saving emission reduction, how to reduce coal consumption while ensure the output steam quality at the same time has become an important topic. This paper combines the technology of RTO (real-time optimization) and zone control in DMC (dynamic matrix control) to achieve this goal. The proposed method adds the coal consumption into the objective function of DMC controller and the operation point of the boiler is permitted to change within a zone which can be set according to the actual requirements of the circulating fluidized bed boiler. The zone control in DMC provides the freedom to reduce the coal consumption and achieves the economic optimal target. Compared to the simple use of constrained DMC control, the proposed method is verified to be remarkable coal-saving by the case study of a 150 t/h boiler of a power plant in Sichuan.

  13. Análisis descriptivo de la dinámica del surf como práctica social

    Directory of Open Access Journals (Sweden)

    Oscar Naranjo Del Giudice

    2014-05-01

    Full Text Available En este trabajo de investigación, la cultura del surf es analizada desde la teoría de la práctica social (Giraldo y Halliday 2012, Shove et al., 2012. Para este fin, se estudiaron cada uno de los elementos que conforman la práctica y la forma como estos se interrelacionan como un todo. Las ofertas de valor construidas pueden ser entendidas como constelaciones (Nornmann y Ramírez 1993 de recursos que mediante su integración contextual forman productos y servicios. Los datos fueron recolectados en un año mediante registros de campo, narrativas, registro fotográfico y observación participante. La información fue recolectada por parte de uno de los investigadores que pertenece a la comunidad de surf durante cuatro meses de manera permanentemente y durante ocho meses de manera intermitentes. Se encontró cómo la teoría de la práctica social puede explicar la dinámica del surf y como el surf puede agregar a la teoría de la práctica social un nuevo factor: la comunidad. La relación de interdependencia entre los aspectos pertenecientes a las prácticas sociales según (Giraldo y Halliday 2012, Shove et al., 2012, comprueba que el desarrollo de cada uno de ellos, afecta toda la práctica, lo cual requiere estudios profundos en cada segmento con el fin de crear, mejorar o destruir cualquier práctica social.

  14. Modeling aerosol surface chemistry and gas-particle interaction kinetics with K2-SURF: PAH oxidation

    Science.gov (United States)

    Shiraiwa, M.; Garland, R.; Pöschl, U.

    2009-04-01

    Atmospheric aerosols are ubiquitous in the atmosphere. They have the ability to impact cloud properties, radiative balance and provide surfaces for heterogeneous reactions. The uptake of gaseous species on aerosol surfaces impacts both the aerosol particles and the atmospheric budget of trace gases. These subsequent changes to the aerosol can in turn impact the aerosol chemical and physical properties. However, this uptake, as well as the impact on the aerosol, is not fully understood. This uncertainty is due not only to limited measurement data, but also a dearth of comprehensive and applicable modeling formalizations used for the analysis, interpretation and description of these heterogeneous processes. Without a common model framework, comparing and extrapolating experimental data is difficult. In this study, a novel kinetic surface model (K2-SURF) [Ammann & Pöschl, 2007; Pöschl et al., 2007] was used to describe the oxidation of a variety of polycyclic aromatic hydrocarbons (PAHs). Integrated into this consistent and universally applicable kinetic and thermodynamic process model are the concepts, terminologies and mathematical formalizations essential to the description of atmospherically relevant physicochemical processes involving organic and mixed organic-inorganic aerosols. Within this process model framework, a detailed master mechanism, simplified mechanism and parameterizations of atmospheric aerosol chemistry are being developed and integrated in analogy to existing mechanisms and parameterizations of atmospheric gas-phase chemistry. One of the key aspects to this model is the defining of a clear distinction between various layers of the particle and surrounding gas phase. The processes occurring at each layer can be fully described using known fluxes and kinetic parameters. Using this system there is a clear separation of gas phase, gas-surface and surface bulk transport and reactions. The partitioning of compounds can be calculated using the flux

  15. Butyltins, trace metals and morphological variables in surf scoter (Melanitta perspicillata) wintering on the south coast of British Columbia, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, J.E. [Environment Canada, Science and Technology Branch, Pacific Wildlife Research Centre, 5421 Robertson Rd., RR1 Delta, British Columbia V4K 3N2 (Canada)]. E-mail: john.elliott@ec.gc.ca; Harris, M.L. [Lorax Environmental, 136 St. Catherine' s Rd, RR3 Bonshaw, Prince Edward Island C0A 1C0 (Canada); Wilson, L.K. [Environment Canada, Canadian Wildlife Service, 5421 Robertson Rd, RR1 Delta, British Columbia V4K 3N2 (Canada); Smith, B.D. [Environment Canada, Science and Technology Branch, Pacific Wildlife Research Centre, 5421 Robertson Rd., RR1 Delta, British Columbia V4K 3N2 (Canada); Batchelor, S.P. [National Water Research Institute, Environment Canada, 867 Lakeshore Rd., PO Box 5050, Burlington, Ontario L7R 4A6 (Canada); Maguire, J. [National Water Research Institute, Environment Canada, 867 Lakeshore Rd., PO Box 5050, Burlington, Ontario L7R 4A6 (Canada)

    2007-09-15

    From 1998 to 2001 we examined spatial and temporal variation in uptake of contaminants by surf scoters (Melanitta perspicillata) in the Georgia Basin region of the Pacific coast of Canada. Samples were collected during late fall and early spring at industrialized and reference locations, carcasses examined, and tissues collected for histology, biomarkers, and contaminant analyses. Scoters from both Vancouver and Victoria harbours had significantly higher hepatic concentrations of {sigma}butyltins than birds from a reference site. In adult male surf scoters, hepatic {sigma}butyltins increased over the winter at two sites (p = 0.02, n = 26), while mercury increased (p = 0.03, n = 15) and selenium decreased at one site (p = 0.001, n = 15). Body condition decreased over the winter at both the treatment site, Howe Sound (p < 0.0001, n = 12), and the reference site, Baynes Sound (p = 0.02, n = 15). Multiple regression analysis using Akaike's Information Criteria (AIC{sub C}) showed an association between hepatic butyltin concentrations and overall body condition (p = 0.06, r = - 0.237). - Hepatic butyltin concentrations in surf scoters increased significantly over a winter in the Strait of Georgia, and correlated negatively with body condition.

  16. Single-stage fluidized-bed gasification

    Science.gov (United States)

    Lau, F. S.; Rue, D. M.; Weil, S. A.; Punwani, D. V.

    1982-04-01

    The single-stage fluidized-bed gasification process, in addition to being a simple system, maximizes gas production and allows the economic exploitation of small peat deposits. The objective of this gasification project is to conduct experiments in order to obtain data for designing a single-stage fluidized-bed gasifier, and to evaluate the economics of converting peat to synthesis gas and to SNG by this process. An existing high-temperature and high-pressure process development unit (PDU) was modified to permit the direct feeding of peat to the fluidized bed. Peat flows by gravity from the feed hopper through a 6-inch line to the screw-feeder conveyor. From there, it is fed to the bottom tee section of the reactor and transported into the gasification zone. Oxygen and steam are fed through a distributing ring into the reactor. Gasification reactions occur in the annulus formed by the reactor tube and a central standpipe. Peat ash is discharged from the reactor by overflowing into the standpipe and is collected in a solids receiver.

  17. Protection Against Cross Infection in Hospital Beds with Integrated Personalized Ventilation

    DEFF Research Database (Denmark)

    Nielsen, Peter V.; Polak, Marcin; Jiang, Hao

    2008-01-01

    to supply air directly to the breathing zone when people are lying in beds, e.g. in a hospital ward. This principle, called "Personalized Ventilation" has shown to be very efficient in the protection of people from cross infection. The system supplies fresh air into the breathing zone through a pillow...

  18. Understanding and predicting bed humidity in fluidized bed granulation.

    Science.gov (United States)

    Hu, Xinhui; Cunningham, John; Winstead, Denita

    2008-04-01

    Bed humidity is a critical parameter that needs to be controlled in a fluidized bed granulation to ensure reliability. To predict and control the bed humidity during the fluidized bed granulation process, a simple model based on the mass conservation of moisture was developed. The moisture mass balance model quantitatively simulates the effects of spray rate, binder solution concentration, airflow rate, inlet air temperature, and dew point on the bed humidity. The model was validated by a series of granulations performed in different scale granulators including Glatt GPCG-1, GPCG-15, and GPCG-60. Good agreement was observed between the theoretical prediction and the measured loss on drying (LOD). The model developed in the current work enables us to choose the appropriate parameters for the fluidized bed granulation and can be used as a valuable tool in process scaling-up.

  19. Coal Bed Methane Primer

    Energy Technology Data Exchange (ETDEWEB)

    Dan Arthur; Bruce Langhus; Jon Seekins

    2005-05-25

    During the second half of the 1990's Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period was a heightened public awareness of environmental concerns. These concerns left unexplained and under-addressed have created a significant growth in public involvement generating literally thousands of unfocused project comments for various regional NEPA efforts resulting in the delayed development of public and fee lands. The accelerating interest in CBM development coupled to the growth in public involvement has prompted the conceptualization of this project for the development of a CBM Primer. The Primer is designed to serve as a summary document, which introduces and encapsulates information pertinent to the development of Coal Bed Methane (CBM), including focused discussions of coal deposits, methane as a natural formed gas, split mineral estates, development techniques, operational issues, producing methods, applicable regulatory frameworks, land and resource management, mitigation measures, preparation of project plans, data availability, Indian Trust issues and relevant environmental technologies. An important aspect of gaining access to federal, state, tribal, or fee lands involves education of a broad array of stakeholders, including land and mineral owners, regulators, conservationists, tribal governments, special interest groups, and numerous others that could be impacted by the development of coal bed methane. Perhaps the most crucial aspect of successfully developing CBM resources is stakeholder education. Currently, an inconsistent picture of CBM exists. There is a significant lack of understanding on the parts of nearly all stakeholders, including industry, government, special interest groups, and land owners. It is envisioned the Primer would being used by a variety of

  20. Bed Rest Muscular Atrophy

    Science.gov (United States)

    Greenleaf, John E.

    2000-01-01

    A major debilitating response from prolonged bed rest (BR) is muscle atrophy, defined as a "decrease in size of a part of tissue after full development has been attained: a wasting away of tissue as from disuse, old age, injury or disease". Part of the complicated mechanism for the dizziness, increased body instability, and exaggerated gait in patients who arise immediately after BR may be a result of not only foot pain, but also of muscular atrophy and associated reduction in lower limb strength. Also, there seems to be a close association between muscle atrophy and bone atrophy. A discussion of many facets of the total BR homeostatic syndrome has been published. The old adage that use determines form which promotes function of bone (Wolff's law) also applies to those people exposed to prolonged BR (without exercise training) in whom muscle atrophy is a consistent finding. An extreme case involved a 16-year-old boy who was ordered to bed by his mother in 1932: after 50 years in bed he had "a lily-white frame with limbs as thin as the legs of a ladder-back chair". These findings emphasize the close relationship between muscle atrophy and bone atrophy. In addition to loss of muscle mass during deconditioning, there is a significant loss of muscle strength and a decrease in protein synthesis. Because the decreases in force (strength) are proportionately greater than those in fiber size or muscle cross-sectional area, other contributory factors must be involved; muscle fiber dehydration may be important.

  1. Bed Rest Muscular Atrophy

    Science.gov (United States)

    Greenleaf, John E.

    2000-01-01

    A major debilitating response from prolonged bed rest (BR) is muscle atrophy, defined as a "decrease in size of a part of tissue after full development has been attained: a wasting away of tissue as from disuse, old age, injury or disease". Part of the complicated mechanism for the dizziness, increased body instability, and exaggerated gait in patients who arise immediately after BR may be a result of not only foot pain, but also of muscular atrophy and associated reduction in lower limb strength. Also, there seems to be a close association between muscle atrophy and bone atrophy. A discussion of many facets of the total BR homeostatic syndrome has been published. The old adage that use determines form which promotes function of bone (Wolff's law) also applies to those people exposed to prolonged BR (without exercise training) in whom muscle atrophy is a consistent finding. An extreme case involved a 16-year-old boy who was ordered to bed by his mother in 1932: after 50 years in bed he had "a lily-white frame with limbs as thin as the legs of a ladder-back chair". These findings emphasize the close relationship between muscle atrophy and bone atrophy. In addition to loss of muscle mass during deconditioning, there is a significant loss of muscle strength and a decrease in protein synthesis. Because the decreases in force (strength) are proportionately greater than those in fiber size or muscle cross-sectional area, other contributory factors must be involved; muscle fiber dehydration may be important.

  2. Racing for the Bed

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    No one knows when the people ofMacheng City began to employthe marriage custom of racingfor the bed, once a custom unique to theTujia ethnic minority. It is said that at the end of awedding, bride and bridegroom enter thebridal chamber together and race for thebed. The one who is the first to sit on thebed will be the master of the new familyIt sounds unreasonable, but quite anumber of people believe in it.Therefore, on the wedding night, manybrides and bridegrooms try their best to

  3. Biparticle fluidized bed reactor

    Science.gov (United States)

    Scott, C.D.

    1993-12-14

    A fluidized bed reactor system which utilizes a fluid phase, a retained fluidized primary particulate phase, and a migratory second particulate phase is described. The primary particulate phase is a particle such as a gel bead containing an immobilized biocatalyst. The secondary particulate phase, continuously introduced and removed in either cocurrent or countercurrent mode, acts in a secondary role such as a sorbent to continuously remove a product or by-product constituent from the fluid phase. Introduction and removal of the sorbent phase is accomplished through the use of feed screw mechanisms and multivane slurry valves. 3 figures.

  4. Flow and transport in Riparian Zones

    DEFF Research Database (Denmark)

    Jensen, Jannick Kolbjørn

    of riparian zones are extended by accounting for the effect of flooding and a key result is that flooding enhances nitrate removal given the right hydrogeological characteristics. Moreover the re-established riparian zones were characterized to understand the effects of flooding on subsurface hydrological......) and easurements of discharge to the river by seepage meter and river bed temperatures. The numerical model was used to simulate how observed dynamic seasonal flooding affects groundwater flow paths, residence times, and formation of zones with flow stagnation, all of which are key aspects in evaluating...

  5. QSAR Study and VolSurf Characterization of Human Intestinal Absorption of Druge

    Institute of Scientific and Technical Information of China (English)

    胡桂香; 商志才; 等

    2003-01-01

    The prediction of human intestinal absorption is a major goal in the design,optimization,and selection of candidates for the develoment of oral drugs.In this study,a computerized method(VolSurf with GRID) was used as a novel tool for predicting human intestinal absorption of test compound,and for determining the critical molecular properties needed for human intestinal absorption.The tested molecules consisted of 20 diverse drug-like compounds.Partial least squares(PLS) discriminant analysis was used to correlate the experimental data with the theoretical molecular properties of human intestinal absorption.A good correlation(r2=0.95,q2=0.86) between the molecular modeling results and the experimental data demonstrated that human intestinal absorption could be predicted from the three-dimensional(3D) molecular structure of a compound .Favorable structureal properties identified for the potent intestinal absorption of drugs included strong imbalance between the center of mass of a molecule and the barycentre of its hydrophilic and hydrophobic regions and a definitive hydrophobic region as well as less hydrogen bonding donors and acceptors in the molecule.

  6. Hybrid Video Stabilization for Mobile Vehicle Detection on SURF in Aerial Surveillance

    Directory of Open Access Journals (Sweden)

    Gao Chunxian

    2015-01-01

    Full Text Available Detection of moving vehicles in aerial video sequences is of great importance with many promising applications in surveillance, intelligence transportation, or public service applications such as emergency evacuation and policy security. However, vehicle detection is a challenging task due to global camera motion, low resolution of vehicles, and low contrast between vehicles and background. In this paper, we present a hybrid method to efficiently detect moving vehicle in aerial videos. Firstly, local feature extraction and matching were performed to estimate the global motion. It was demonstrated that the Speeded Up Robust Feature (SURF key points were more suitable for the stabilization task. Then, a list of dynamic pixels was obtained and grouped for different moving vehicles by comparing the different optical flow normal. To enhance the precision of detection, some preprocessing methods were applied to the surveillance system, such as road extraction and other features. A quantitative evaluation on real video sequences indicated that the proposed method improved the detection performance significantly.

  7. Enzyme as catalytic wheel powered by a Markovian engine: conformational coupling and barrier surfing models

    Science.gov (United States)

    Tsong, Tian Yow; Chang, Cheng-Hung

    2005-05-01

    We examine a typical Michaelis-Menten Enzyme (MME) and redress it to form a transducer of free energy, and electric, acoustic, or other types of energy. This amendment and extension is necessary in lieu of recent experiments in which enzymes are shown to perform pump, motor, and locomotion functions resembling their macroscopic counterparts. Classical textbook depicts enzyme, or an MME, as biocatalyst which can enhance the rate of a chemical reaction by lowering the activation barrier but cannot shift the thermodynamic equilibrium of the biochemical reaction. An energy transducer, on the other hand, must also be able to harvest, store, or divert energy and in doing so alter the chemical equilibrium, change the energy form, fuel an energy consuming process, or perform all these functions stepwise in one catalytic turnover. The catalytic wheel presented in this communication is both a catalyst and an energy transducer and can perform all these tasks with ease. A Conformational Coupling Model for the rotary motors and a Barrier Surfing Model for the track-guided stepping motors and transporters, are presented and compared. It is shown that the core engine of the catalytic wheel, or a Brownian motor, is a Markovian engine. It remains to be seen if this core engine is the basic mechanism for a wide variety of bio-molecular energy transducers, as well as certain other dynamic systems, for example, the Parrondo's Games.

  8. Dynamics of fine particles in liquid-solid fluidized beds

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    On the basis of the Local Equilibrium Model (LEM), fine particles with large Richardson-Zaki exponent n show, under certain conditions during bed expansion and collapse, different dynamic behavior from particles with small n. For an expansion process there may be a concentration discontinuity propagating upward from the distributor, and, on the contrary, for a collapse process there may be a progressively broadening and upward-propagating continuous transition zone instead of discontinuity. The predictions of the bed height variation and the discontinuity trace have been validated experimentally.

  9. 3D-QSAR studies on UDP-glucuronosyltransferase 2B7 substrates using the pharmacophore and VolSurf approaches.

    Science.gov (United States)

    Ako, Roland; Dong, Dong; Wu, Baojian

    2012-09-01

    UDP-glucuronosyltransferase 2B7 (UGT2B7) is an important enzyme responsible for clearance of many drugs. Here, we report two 3D quantitative structure-activity relationship (QSAR) models for UGT2B7 using the pharmacophore and VolSurf approach, respectively. The dataset included 53 structurally diverse UGT2B7 substrates, 36 of which were used for the training set and 17 of which for the external test set. Pharmacophore-based 3D-QSAR model (or hypothesis) was developed using the Discovery Studio program. A user-defined "glucuronidation site" feature was forcefully included in a pharmacophore hypothesis. VolSurf-based 3D-QSAR model was generated using the VolSurf program. This involves calculation of VolSurf descriptors, variable selection with the FFD algorithm, and partial least squares (PLS) analyses. The best pharmacophore model (r(2) = 0.736) consists of one glucuronidation site, one hydrogen bond acceptor, and three hydrophobic regions. Using this model, K(m) values for 14 of 17 test substrates were predicted within one log unit. The yielded VolSurf (PLS) model with two components shows statistical significance in both fitting and internal predicting (r(2) = 0.866, q(2) = 0.728). Further, the K(m) values for all test substrates were predicted within one log unit. In addition, the VolSurf model reveals an overlay of chemical features influencing the enzyme-substrate binding. Those include molecular size and shape, integy moments, capacity factors, best volumes of DRY probe, H-bonding, and log P. In conclusion, the pharmacophore and VolSurf approaches are successfully utilized to establish predictive models for UGT2B7. The derived models should be an efficient tool for high throughput prediction of UGT2B7 metabolism.

  10. Study of fluidized-bed desulfurization with zinc ferrite

    Energy Technology Data Exchange (ETDEWEB)

    Grindley, T

    1991-01-01

    Previous work established the technical feasibility of desulfurizing the hot product gases of coal gasification with fixed beds of a regenerable zinc ferrite sorbent. This process, intended for integration with coal gasifiers and gas turbines, has been tested and studied in considerable detail in a process development unit. Though possessing the advantages of high-sulfur absorption at low-sulfur breakthrough and the lack of sorbent attrition characteristic of a stationary bed, fixed beds also have inherent disadvantages: susceptibility to plugging by particles and a large diluent requirement during regeneration to control the reaction zone temperature. Therefore, METC conducted a scoping laboratory test program to determine the desulfurizing capability of fluid beds of zinc ferrite. Results from this program are presented. The results generally demonstrated that fluid beds of zinc ferrite have the potential to lower the H{sub 2}S level in hot gas from 10,000 to 10 ppmv. To achieve this at a high-sorbent sulfur loading would require two fluid-bed stages. Sorbent attrition appears to be acceptably low. Planned future activities include tests at high pressure with both simulated gas and in a gasifier sidestream.

  11. Emissions and distribution of methyl bromide in field beds applied at two rates and covered with two types of plastic mulches.

    Science.gov (United States)

    Ou, Li-Tse; Thomas, John E; Allen, L Hartwell; Vu, Joseph C; Dickson, Donald W

    2007-01-01

    A field experiment was conducted to compare two plastic mulches and two application rates on surface emissions and subsurface distribution of methyl bromide (MBr) in field beds in Florida. Within 30 minutes after injection of MBr to 30 cm depth, MBr had diffused upward to soil surface in all beds covered with polyethylene film (PE) or virtually impermeable film (VIF) and applied at a high rate (392 kg/ha) and a low rate (196 kg/ha). Due to the highly permeable nature of PE, within 30 minutes after injection, MBr volatilized from the bed surfaces of the two PE-covered beds into the atmosphere. The amount of volatilization was greater for the high rate-treatment bed. On the other hand, volatilization of MBr from the bed surfaces of the two VIF-covered beds were negligible. Volatilization losses occurred from the edges of all the beds covered with PE or VIF and were greater from the high rate-treatment beds. Initial vertical diffusion of MBr in the subsurface of the beds covered with PE or VIF was mainly upward, as large concentrations of MBr were detected from near bed surfaces to 20 cm depth in these beds 30 minutes after injection and little or no MBr was found at 40 cm depth. The two VIF-covered beds exhibited greater MBr concentrations and longer resident times in the root zone (0.5-40 cm depth) than corresponding PE-covered beds. Concentrations of MBr in the root zone of the high rate-treatment beds were 3.6-6.1 times larger than the low rate-treatment beds during the first days after application. In conclusion, VIF promoted retention of MBr in the root zone and, if volatilization loss from bed edges can be blocked, volatilization loss from VIF-covered beds should be negligible.

  12. Effects of bed material grain-size distribution on bed morphology at a river confluence - numerical study

    Science.gov (United States)

    Ghobadian, Rasool; Đorđević, Dejana; Ghanbari, Sara

    2017-04-01

    River confluences play an important role in the drainage of a catchment and transport of sediments and pollutants within this area. Riverbed morphology at these important nodes of the river drainage network might be very complex as shown by numerous laboratory studies in movable bed models and scarce bathymetric surveys in the field. Different parameters were varied in laboratory confluences to infer which of them control morphodynamic processes at the confluence. It was shown that the development of three characteristic morphological elements, i.e. a bar with an avalanche face at the entrance of a tributary channel to the confluence, a scour hole and a separation zone bar in the confluence hydrodynamics zone, depended on: 1) the confluence plan-view (symmetrical or asymmetrical), 2) the junction angle, 3) the channel width ratio, 4) discharge and momentum-flux ratios of the combining flows, 5) sediment loads supplied into one or both upstream channels and 6) the sediment size of the bed material and of supplied sediments. However, most of studies were conducted with uniform sediments. There are only a few laboratory and numerical studies on the effect of bed material gradation on the erosion and deposition patterns in the confluence hydrodynamics zone (CHZ). This study, thus, focuses on effects that bed material grain-size distribution (GSD) has on these patterns at a river confluence. A layout of a 60o laboratory confluence of two straight channels with channel width ratio BT/BR=0.71 (where BT and BR are widths of tributary and main channels, respectively) is chosen for this numerical study. The laboratory confluence was created to study sediment transport and bed morphology at the confluence whose bed is filled with uniform sediments of D = 1.95 mm size. The experimental data from this confluence are selected for validation of a 3D finite-volume based model SSIIM1 that is used in the present study. Effects of GSD are analysed for four materials having the same D

  13. Variability of Bed Drag on Cohesive Beds under Wave Action

    Directory of Open Access Journals (Sweden)

    Ilgar Safak

    2016-04-01

    Full Text Available Drag force at the bed acting on water flow is a major control on water circulation and sediment transport. Bed drag has been thoroughly studied in sandy waters, but less so in muddy coastal waters. The variation of bed drag on a muddy shelf is investigated here using field observations of currents, waves, and sediment concentration collected during moderate wind and wave events. To estimate bottom shear stress and the bed drag coefficient, an indirect empirical method of logarithmic fitting to current velocity profiles (log-law, a bottom boundary layer model for combined wave-current flow, and a direct method that uses turbulent fluctuations of velocity are used. The overestimation by the log-law is significantly reduced by taking turbulence suppression due to sediment-induced stratification into account. The best agreement between the model and the direct estimates is obtained by using a hydraulic roughness of 10 - 4 m in the model. Direct estimate of bed drag on the muddy bed is found to have a decreasing trend with increasing current speed, and is estimated to be around 0.0025 in conditions where wave-induced flow is relatively weak. Bed drag shows an increase (up to fourfold with increasing wave energy. These findings can be used to test the bed drag parameterizations in hydrodynamic and sediment transport models and the skills of these models in predicting flows in muddy environments.

  14. Variability of bed drag on cohesive beds under wave action

    Science.gov (United States)

    Safak, Ilgar

    2016-01-01

    Drag force at the bed acting on water flow is a major control on water circulation and sediment transport. Bed drag has been thoroughly studied in sandy waters, but less so in muddy coastal waters. The variation of bed drag on a muddy shelf is investigated here using field observations of currents, waves, and sediment concentration collected during moderate wind and wave events. To estimate bottom shear stress and the bed drag coefficient, an indirect empirical method of logarithmic fitting to current velocity profiles (log-law), a bottom boundary layer model for combined wave-current flow, and a direct method that uses turbulent fluctuations of velocity are used. The overestimation by the log-law is significantly reduced by taking turbulence suppression due to sediment-induced stratification into account. The best agreement between the model and the direct estimates is obtained by using a hydraulic roughness of 10  m in the model. Direct estimate of bed drag on the muddy bed is found to have a decreasing trend with increasing current speed, and is estimated to be around 0.0025 in conditions where wave-induced flow is relatively weak. Bed drag shows an increase (up to fourfold) with increasing wave energy. These findings can be used to test the bed drag parameterizations in hydrodynamic and sediment transport models and the skills of these models in predicting flows in muddy environments.

  15. Spatial and Temporal Patterns of Bed Mobility Revealed Through the Use of Hydrodynamic Modeling and Motion-Sensing Radio Tagged Particles in a Large Gravel-Bed River

    Science.gov (United States)

    May, C. L.; Smith Pryor, B.; Lisle, T. E.; Lang, M. M.

    2010-12-01

    Flow conditions that initiate bedload transport, and an understanding of the spatial and temporal variability in bed mobility, provide important insight into the dynamics of riverine habitat. However, quantifying these processes at the reach scale has been elusive, especially in large river systems. Our approach coupled hydrodynamic modeling and empirical measures of bed mobility based on traditional tracers and motion-sensing radio tagged particles to determine flow conditions at initial motion and the spatial extent of bed mobility in the Trinity River of northern California. High-resolution bathymetric surveying and grain size measurements were used as input for hydrodynamic modeling. A narrow band Acoustic Doppler Profiler positioned using a Real Time Kinematic global positioning system provided separate calibration and validation data during flood events. Model-predicted Shields stress identified spatially explicit zones of differential bed mobility and indicated that a potential zone of full mobility was limited to a central core that expanded with increasing flow strength. Model-predicted zones of full mobility were well validated by patches of traditional painted rock tracer particles. In addition to traditional tracers, motion-sensing radio tagged particles were used to identify the timing of initial motion. By simultaneously measuring discharge, and modeling bed forces at that discharge, shear stress at initial motion was calculated. These calculations revealed that initial motion of bed particles varied substantially between flood events. Temporal variability in the distribution of critical shear stress suggests that the sequence of flood events is an important determinant of bed strength and, thus, resistance to motion. The combined use of high-resolution instrumentation and flow modeling revealed important insight into the importance of bed conditioning by previous floods on bed mobility.

  16. Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

    Science.gov (United States)

    Huang, Meng; Gao, Zhiqiu; Miao, Shiguang; Chen, Fei; LeMone, Margaret A.; Li, Ju; Hu, Fei; Wang, Linlin

    2016-09-01

    Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance (σ _w^2 >0.1 m2s^{-2}) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which σ _w^2 decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from ≈ 270 to ≈ 1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.

  17. Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

    Science.gov (United States)

    Huang, Meng; Gao, Zhiqiu; Miao, Shiguang; Chen, Fei; LeMone, Margaret A.; Li, Ju; Hu, Fei; Wang, Linlin

    2017-03-01

    Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance (σ _w^2 >0.1 m2s^{-2}) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which σ _w^2 decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from ≈ 270 to ≈ 1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.

  18. Effectiveness of Bed Bug Pesticides

    Science.gov (United States)

    Before EPA allows a bed bug claim on a label, the product must be supported by data showing it will kill bed bugs when applied according to the label. Also consider factors such as extent of infestation, site preparation, and insect life stages.

  19. Bed Bug Laws and Regulations

    Science.gov (United States)

    21 states have some level of regulation with regard to bed bugs. Most of these requirements focus on hotels and landlords or other property managers. The Department of Housing and Urban Development has guidance on controlling bed bugs in public housing.

  20. Novel Simulated moving bed technologies

    Energy Technology Data Exchange (ETDEWEB)

    Purdue University

    2003-12-30

    Cellulose and hemicellulose from plants and other biomass can be hydrolyzed to produce sugars (i.e. glucose and xylose). Once these sugars are separated from other impurities, they can serve as feedstock in fermentation to produce ethanol (as fuels), lactic acid, or other valuable chemicals. The need for producing fuels and chemicals from renewable biomass has become abundantly clear over the last decade. However, the cost of producing fermentable sugars from biomass hydrolyzate using existing technology is relatively high and has been a major obstacle. The objective of this project is to develop an efficient and economical simulated moving bed (SMB) process to recover fermentable sugars from biomass hydrolyzate. Sulfuric acid can hydrolyze the cellulose and hemicellulose in biomass to sugars, but this process can generate byproducts such as acetic acid, and can lead to further degradation of the xylose to furfural and glucose to hydroxymethyl furfural (HMF). Also, lignin and other compounds in the biomass will degrade to various phenolic compounds. If the concentrations of these compounds exceed certain threshold levels, they will be toxic to the downstream fermentation, and will severely limit the usefulness of the derived sugars. Standard post-hydrolysis processing involves neutralization of sulfuric acid, usually with lime (calcium hydroxide). A study by Wooley et al.showed that the limed hydrolyzate gave a low ethanol yield in fermentation test (20% of theoretical yield compared to 77% of theoretical yield from fermentation of pure sugars). They showed that instead of adding lime, an ion exclusion chromatography process could be used to remove acids, as well as to isolate the sugars from the biomass hydrolyzate. In this project, we investigated the feasibility of developing an economical SMB process based on (1) a polymeric adsorbent, Dowex99, which was used by Wooley et al., (2) a second polymeric adsorbent, poly-4-vinyl pyridine (or PVP in short, Reilly

  1. Method for using fast fluidized bed dry bottom coal gasification

    Science.gov (United States)

    Snell, George J.; Kydd, Paul H.

    1983-01-01

    Carbonaceous solid material such as coal is gasified in a fast fluidized bed gasification system utilizing dual fluidized beds of hot char. The coal in particulate form is introduced along with oxygen-containing gas and steam into the fast fluidized bed gasification zone of a gasifier assembly wherein the upward superficial gas velocity exceeds about 5.0 ft/sec and temperature is 1500.degree.-1850.degree. F. The resulting effluent gas and substantial char are passed through a primary cyclone separator, from which char solids are returned to the fluidized bed. Gas from the primary cyclone separator is passed to a secondary cyclone separator, from which remaining fine char solids are returned through an injection nozzle together with additional steam and oxygen-containing gas to an oxidation zone located at the bottom of the gasifier, wherein the upward gas velocity ranges from about 3-15 ft/sec and is maintained at 1600.degree.-200.degree. F. temperature. This gasification arrangement provides for increased utilization of the secondary char material to produce higher overall carbon conversion and product yields in the process.

  2. Debris-bed friction of hard-bedded glaciers

    Science.gov (United States)

    Cohen, D.; Iverson, N.R.; Hooyer, T.S.; Fischer, U.H.; Jackson, M.; Moore, P.L.

    2005-01-01

    [1] Field measurements of debris-bed friction on a smooth rock tablet at the bed of Engabreen, a hard-bedded, temperate glacier in northern Norway, indicated that basal ice containing 10% debris by volume exerted local shear traction of up to 500 kPa. The corresponding bulk friction coefficient between the dirty basal ice and the tablet was between 0.05 and 0.08. A model of friction in which nonrotating spherical rock particles are held in frictional contact with the bed by bed-normal ice flow can account for these measurements if the power law exponent for ice flowing past large clasts is 1. A small exponent (n glacier sliding at 20 m a-1 with a geothermally induced melt rate of 0.006 m a-1 and an effective pressure of 300 kPa can exceed 100 kPa. Debris-bed friction can therefore be a major component of sliding resistance, contradicting the common assumption that debris-bed friction is negligible. Copyright 2005 by the American Geophysical Union.

  3. Flow and fracture in water-saturated, unconstrained granular beds

    Directory of Open Access Journals (Sweden)

    Germán eVaras

    2015-06-01

    Full Text Available The injection of gas in a liquid-saturated granular bed gives rise to a wide variety of invasion patterns. Many studies have focused on constrained porous media, in which the grains are fixed in the bed and only the interstitial fluid flows when the gas invades the system. With a free upper boundary, however, the grains can be entrained by the ascending gas or fluid motion, and the competition between the upward motion of grains and sedimentation leads to new patterns. We propose a brief review of the experimental investigation of the dynamics of air rising through a water-saturated, unconstrained granular bed, in both two and three dimensions. After describing the invasion pattern at short and long time, a tentative regime-diagram is proposed. We report original results showing a dependence of the fluidized zone shape, at long times, on the injection flow rate and grain size. A method based on image analysis makes it possible to detect not only the fluidized zone profile in the stationary regime, but also to follow the transient dynamics of its formation. Finally, we describe the degassing dynamics inside the fluidized zone, in the stationary regime. Depending on the experimental conditions, regular bubbling, continuous degassing, intermittent regime or even spontaneous flow-to-fracture transition are observed.

  4. Modeling biomass gasification in circulating fluidized beds

    Science.gov (United States)

    Miao, Qi

    In this thesis, the modeling of biomass gasification in circulating fluidized beds was studied. The hydrodynamics of a circulating fluidized bed operating on biomass particles were first investigated, both experimentally and numerically. Then a comprehensive mathematical model was presented to predict the overall performance of a 1.2 MWe biomass gasification and power generation plant. A sensitivity analysis was conducted to test its response to several gasifier operating conditions. The model was validated using the experimental results obtained from the plant and two other circulating fluidized bed biomass gasifiers (CFBBGs). Finally, an ASPEN PLUS simulation model of biomass gasification was presented based on minimization of the Gibbs free energy of the reaction system at chemical equilibrium. Hydrodynamics plays a crucial role in defining the performance of gas-solid circulating fluidized beds (CFBs). A 2-dimensional mathematical model was developed considering the hydrodynamic behavior of CFB gasifiers. In the modeling, the CFB riser was divided into two regions: a dense region at the bottom and a dilute region at the top of the riser. Kunii and Levenspiel (1991)'s model was adopted to express the vertical solids distribution with some other assumptions. Radial distributions of bed voidage were taken into account in the upper zone by using Zhang et al. (1991)'s correlation. For model validation purposes, a cold model CFB was employed, in which sawdust was transported with air as the fluidizing agent. A comprehensive mathematical model was developed to predict the overall performance of a 1.2 MWe biomass gasification and power generation demonstration plant in China. Hydrodynamics as well as chemical reaction kinetics were considered. The fluidized bed riser was divided into two distinct sections: (a) a dense region at the bottom of the bed where biomass undergoes mainly heterogeneous reactions and (b) a dilute region at the top where most of homogeneous

  5. Development of an Internally Circulating Fluidized Bed Membrane Reactor for Hydrogen Production from Natural Gas

    Institute of Scientific and Technical Information of China (English)

    XIE Dong-lai; GRACE John R; LIM C Jim

    2006-01-01

    An innovative Internally Circulating Fluidized Bed Membrane Reactor (ICFBMR) was designed and operated for ultra-pure hydrogen production from natural gas. The reactor includes internal catalyst solids circulation for conveying heat between a reforming zone and an oxidation zone. In the reforming zone, catalyst particles are transported upwards by reactant gas where steam reforming reactions are taking place and hydrogen is permeating through the membrane surfaces. Air is injected into the oxidation zone to generate heat which is carried by catalyst particles to the reforming zone supporting the endothermic steam reforming reaction. The technology development process is introduced: cold model test,pilot plant and industrial demonstration unit. The process flow diagram and key components of each unit are described.The ICFBMR process has the potential to provide improved performance relative to conventional SMR fixed-bed tubular reactors.

  6. Diseño de un programa de Surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años

    OpenAIRE

    Iriarte Gomara, Pablo

    2015-01-01

    El objetivo de este trabajo es diseñar un programa de surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años. El Síndrome de Down se define como una discapacidad intelectual causada por una alteración en el par de cromosomas 21 (OMS, 2011). Resulta de especial relevancia el tratamiento de dicha discapacidad de manera no farmacológica, destacando la actividad física, en este caso el surf, como elemento inclusivo a nivel físico, psicológico y social. Se analizan distintos pro...

  7. Syngas combustor for fluidized bed applications

    Energy Technology Data Exchange (ETDEWEB)

    Brushwood, J.

    1999-07-01

    The Siemens Westinghouse Multi-Annular Swirl Burner (MASB) is a rich-quench-lean gas turbine combustor for use primarily on synthetic fuel gases made by gasifying solid fuels (coal or biomass). These fuels contain high amounts of fuel bound nitrogen, primarily as ammonia, which are converted to molecular nitrogen rather than to nitrogen oxides in the rich zone of this combustor. The combustor can operate in many modes. In second-generation pressurized fluidized bed combustion (PFBC) applications, the fuel gas is burned in a hot, depleted oxygen air stream generated in a fluid bed coal combustor. In 1-1/2 generation PFBC applications, natural gas is burned in this vitiated air stream. In an integrated gasification combined cycle (IGCC) application, the synthetic fuel gas is burned in turbine compressor air. In this paper, the MASB technology is described. Recent results of tests at the University of Tennessee Space Institute (UTSI) for these various operation modes on a full scale basket are summarized. The start-up and simple cycle operating experience on propane at the Wilsonville Power Systems Development Facility (PSDF) are also described. In addition, the design issues related to the integration of the MASB in the City of Lakeland PCFB Clean Coal Demonstration Project is summarized.

  8. Novel Simulated moving bed technologies

    Energy Technology Data Exchange (ETDEWEB)

    Purdue University

    2003-12-30

    Cellulose and hemicellulose from plants and other biomass can be hydrolyzed to produce sugars (i.e. glucose and xylose). Once these sugars are separated from other impurities, they can serve as feedstock in fermentation to produce ethanol (as fuels), lactic acid, or other valuable chemicals. The need for producing fuels and chemicals from renewable biomass has become abundantly clear over the last decade. However, the cost of producing fermentable sugars from biomass hydrolyzate using existing technology is relatively high and has been a major obstacle. The objective of this project is to develop an efficient and economical simulated moving bed (SMB) process to recover fermentable sugars from biomass hydrolyzate. Sulfuric acid can hydrolyze the cellulose and hemicellulose in biomass to sugars, but this process can generate byproducts such as acetic acid, and can lead to further degradation of the xylose to furfural and glucose to hydroxymethyl furfural (HMF). Also, lignin and other compounds in the biomass will degrade to various phenolic compounds. If the concentrations of these compounds exceed certain threshold levels, they will be toxic to the downstream fermentation, and will severely limit the usefulness of the derived sugars. Standard post-hydrolysis processing involves neutralization of sulfuric acid, usually with lime (calcium hydroxide). A study by Wooley et al.showed that the limed hydrolyzate gave a low ethanol yield in fermentation test (20% of theoretical yield compared to 77% of theoretical yield from fermentation of pure sugars). They showed that instead of adding lime, an ion exclusion chromatography process could be used to remove acids, as well as to isolate the sugars from the biomass hydrolyzate. In this project, we investigated the feasibility of developing an economical SMB process based on (1) a polymeric adsorbent, Dowex99, which was used by Wooley et al., (2) a second polymeric adsorbent, poly-4-vinyl pyridine (or PVP in short, Reilly

  9. The influence of complex biological feedstock on the fluidization and bed stability in expanded bed adsorption

    Science.gov (United States)

    Fernandez-Lahore; Kleef; Kula; Thommes

    1999-08-20

    The stability of expanded bed adsorption systems (EBA) was studied in biomass containing culture broth by residence time distribution (RTD) experiments, using pulse inputs of fluorescent molecules as tracers. Different commercial adsorbents (Streamline DEAE, SP, Phenyl, Chelating, and AC) were tested at various biomass concentrations (2.5-12 %, wet weight) of whole (Saccharomyces cerevisiae) yeast, yeast cell homogenate, and Escherichia coli homogenate. Analyzing the RTD according to the PDE model (PDE: axially dispersed plug-flow exchanging mass with stagnant zones) allowed the calculation of three parameters: the number of transfer units for mass exchange between mobile and stagnant fraction (N), the Peclet number for overall axial dispersion (P), and the mobile fraction of the liquid in axially dispersed plug flow (varphi). When fluidization was performed in particle-free buffer the normalized response signal (after perfect input pulse) was symmetric (N:0; P: 50-100; varphi: 1), thus, demonstrating the formation of a homogeneous fluidized (expanded) bed. Upon application of suspended biomass the RTD was skewed, depending on the adsorbent used and the type and level of biomass present in the sample. This situation leads to three different characteristic pictures: the well-fluidized system (N: >/= 7-10; P: >/= 40; varphi: 0.80-0.90), the system exhibiting bottom channeling (N: /= 40; varphi: 0.5-0.7) and, the system where extensive agglomeration develops (N: 4-7; P: 20-40; varphi: < 0.5). These results demonstrate that changes in the hydrodynamics of EBA already take place in the presence of moderate concentrations of biomass. Furthermore, those changes can be quantitatively described mainly in terms of the fraction of stagnant zones in the system, which are formed due to the interaction of biomass and adsorbent. The technique described here can be used to evaluate a certain combination of adsorbent and biomass with regard to its suitability for expanded bed

  10. Torsion testing of bed joints

    DEFF Research Database (Denmark)

    Hansen, Klavs Feilberg; Pedersen, Carsten Mørk

    2008-01-01

    be carried out directly in a normal testing machine. The torsion strength is believed to be the most important parameter in out-of-plane resistance of masonry walls subjected to bending about an axis perpendicular to the bed joints. The paper also contains a few test results from bending of small walls about...... an axis perpendicular to the bed joints, which indicate the close connection between these results and results from torsion tests. These characteristics make the torsion strength well suited to act as substitute parameter for the bending strength of masonry about an axis perpendicular to the bed joints....

  11. Investigations of coastal zones using a modular amphibious vehicle

    Science.gov (United States)

    Zeziulin, Denis; Makarov, Vladimir; Filatov, Valery; Beresnev, Pavel; Belyakov, Vladimir; Kurkin, Andrey

    2017-04-01

    The project aims to develop a means of verification of data on sea excitement derived from Autonomous mobile robotic system (AMRS) for coastal monitoring and forecasting marine natural disasters [Kurkin A., Pelinovsky E., Tyugin D., Giniyatullin A., Kurkina O., Belyakov V., Makarov V., Zeziulin D., Kuznetsov K. Autonomous Robotic System for Coastal Monitoring // Proceedings of the 12th International Conference on the Mediterranean Coastal Environment MEDCOAST. 2015. V. 2. P. 933-944]. The chassis of the developed remote-controlled modular amphibious vehicle (MAV) will be equipped with a video camera and a hydrostatic wave-plotting device with strings sensors mounted on the stationary body's supports. To track the position of the MAV there will be installed the navigation system in order to correct the measurement data. The peculiarity of the tricycle MAV is the ability to change its geometric parameters that will increase its stability to actions of destructive waves and mobility. In May-June 2016 authors took part in conducting field tests of the AMRS on the Gulf of Mordvinov (Sea of Okhotsk, Sakhalin Island). Participation in this expedition contributed to obtaining experimental data on the topography and the physical and mechanical properties of the surf zone of the most promising field of using the MAV as a road for its moving. Within the project there was developed a mathematical model of the MAV motion in coastal conditions taking into account the new analytical dependences describing the physical and mechanical characteristics of the ground surfaces and the landscape, as well as hydrodynamic effects of surf zones. The reasonable selection of rational parameters of the MAV and developing the methodology of creating effective vehicles for investigations of specific coastal areas of the Okhotsk Sea will be made by using the mathematical model.

  12. On the resonance hypothesis of storm surge and surf beat run-up

    Science.gov (United States)

    Postacioglu, Nazmi; Sinan Özeren, M.; Canlı, Umut

    2017-06-01

    Resonance has recently been proposed as the fundamental underlying mechanism that shapes the amplification in coastal run-up for storm surges and surf beats, which are long-wavelength disturbances created by fluid velocity differences between the wave groups and the regions outside the wave groups. It is without doubt that the resonance plays a role in run-up phenomena of various kinds; however, we think that the extent to which it plays its role has not been completely understood. For incident waves, which we assume to be linear, the best approach to investigate the role played by the resonance would be to calculate the normal modes by taking radiation damping into account and then testing how those modes are excited by the incident waves. Such modes diverge offshore, but they can still be used to calculate the run-up. There are a small number of previous works that attempt to calculate the resonant frequencies, but they do not relate the amplitudes of the normal modes to those of the incident wave. This is because, by not including radiation damping, they automatically induce a resonance that leads to infinite amplitudes, thus preventing them from predicting the exact contribution of the resonance to coastal run-up. In this study we consider two different coastal geometries: an infinitely wide beach with a constant slope connecting to a flat-bottomed deep ocean and a bay with sloping bottom, again, connected to a deep ocean. For the fully 1-D problem we find significant resonance if the bathymetric discontinuity is large.The linearisation of the seaward boundary condition leads to slightly smaller run-ups. For the 2-D ocean case the analysis shows that the wave confinement is very effective when the bay is narrow. The bay aspect ratio is the determining factor for the radiation damping. One reason why we include a bathymetric discontinuity is to mimic some natural settings where bays and gulfs may lead to abrupt depth gradients such as the Tokyo Bay. The other

  13. Interacting effects of latitude, mass, age, and sex on winter survival of Surf Scoters (Melanitta perspicillata): Implications for differential migration

    Science.gov (United States)

    Uher-Koch, Brian D.; Esler, Daniel N.; Iverson, Samuel A.; Ward, David; Boyd, Sean; Kirk, Molly; Lewis, Tyler L.; VanStratt, Corey S.; Brodhead, Katherine M.; Hupp, Jerry; Schmutz, Joel A.

    2016-01-01

    We quantified variation in winter survival of Surf Scoters (Melanitta perspicillata (L., 1758)) across nearly 30° of latitude on the Pacific coast of North America to evaluate potential effects on winter distributions, including observed differential distributions of age and sex classes. We monitored fates of 297 radio-marked Surf Scoters at three study sites: (1) near the northern periphery of their wintering range in southeast Alaska, USA, (2) the range core in British Columbia, Canada, and (3) the southern periphery in Baja California, Mexico. We detected 34 mortalities and determined that survival averaged lower at the range peripheries than in the range core, was lower during mid-winter than during late winter at all sites, and was positively correlated with body mass within locations. Although neither age nor sex class had direct effects, mass effects led to differential survival patterns among classes. When simultaneously incorporating these interacting influences, adult males of mean mass for their location had highest survival at the northern range periphery in Alaska, whereas adult females and juveniles had higher survival at the range core and the southern periphery. Our observations help to explain patterns of differential migration and distribution reported for this species and highlight seasonal periods (mid-winter) and locations (range peripheries) of elevated levels of mortality for demographically important age–sex classes (adult females).

  14. A Comprehensive Motion Estimation Technique for the Improvement of EIS Methods Based on the SURF Algorithm and Kalman Filter.

    Science.gov (United States)

    Cheng, Xuemin; Hao, Qun; Xie, Mengdi

    2016-04-07

    Video stabilization is an important technology for removing undesired motion in videos. This paper presents a comprehensive motion estimation method for electronic image stabilization techniques, integrating the speeded up robust features (SURF) algorithm, modified random sample consensus (RANSAC), and the Kalman filter, and also taking camera scaling and conventional camera translation and rotation into full consideration. Using SURF in sub-pixel space, feature points were located and then matched. The false matched points were removed by modified RANSAC. Global motion was estimated by using the feature points and modified cascading parameters, which reduced the accumulated errors in a series of frames and improved the peak signal to noise ratio (PSNR) by 8.2 dB. A specific Kalman filter model was established by considering the movement and scaling of scenes. Finally, video stabilization was achieved with filtered motion parameters using the modified adjacent frame compensation. The experimental results proved that the target images were stabilized even when the vibrating amplitudes of the video become increasingly large.

  15. Influence of pioneer vegetation on the morphodynamic evolution of a river bed

    Science.gov (United States)

    Schwarzwälder, Kordula; Cuchet, Matilde; Schlagenhauser, Mathias

    2016-04-01

    In a natural river the morphology and the evolution of the river bed is highly influenced by the vegetation in and along this river bed. To estimate these effects and influences, a pre-study was conducted in a lab-flume in the outside area of the Oskar-von-Miller-Institute of the TUM. In this flume an alternating flow regime with a change between floods and standard discharge was mimicking a natural flow regime. The experiment was started with an uniform and plane sand area were the flow regime should built a nature-like morphology. During the experiment, seeds of Alfalfa were added and the sprouting plants could influence the formation of the riverbed. The changes in the morphology were measured using photogrammetry and also a standard Kinect system. The results of the measurements shall be used as basis for a 3D numerical simulation. In addition we analyzed different plants and their sprouting behavior under different growing conditions to ensure the use of the most appropriate ones for this set-up. The experimental performance was based on the experiments of Tal and Paola 2010. Tal and Paola 2010: EARTH SURFACE PROCESSES AND LANDFORMS;Earth Surf. Process. Landforms 35, 1014-1028 (2010); Copyright Published online 9 February 2010 in Wiley InterScience; (www.interscience.wiley.com) DOI: 10.1002/esp.1908

  16. Bed Bugs: The Australian Response

    Science.gov (United States)

    Doggett, Stephen L.; Orton, Christopher J.; Lilly, David G.; Russell, Richard C.

    2011-01-01

    Australia has experienced a sudden and unexpected resurgence in bed bug infestations from both Cimex lectularius L. and Cimex hemipterus F. A survey in 2006 revealed that infestations had increased across the nation by an average of 4,500% since the start of the decade. In response, a multi-disciplinary approach to combat the rise of this public health pest was implemented and involved the coordinated efforts of several organizations. The key components of the strategy included the introduction of a pest management standard ‘A Code of Practice for the Control of Bed Bug Infestations in Australia’ that defines and promotes ‘best practice’ in bed bug eradication, the development of a policy and procedural guide for accommodation providers, education of stakeholders in best management practices, and research. These strategies continue to evolve with developments that lead to improvements in ‘best practice’ while bed bugs remain problematic in Australia. PMID:26467616

  17. Top Ten Bed Bug Tips

    Science.gov (United States)

    ... temperatures are necessary for successful heat treatment. Black plastic bags in the sun might work to kill bed ... Place the used bag in a tightly sealed plastic bag and in an outside garbage bin. 10. Turn ...

  18. Bed Bugs: The Australian Response

    Directory of Open Access Journals (Sweden)

    Richard C. Russell

    2011-04-01

    Full Text Available Australia has experienced a sudden and unexpected resurgence in bed bug infestations from both Cimex lectularius L. and Cimex hemipterus F. A survey in 2006 revealed that infestations had increased across the nation by an average of 4,500% since the start of the decade. In response, a multi-disciplinary approach to combat the rise of this public health pest was implemented and involved the coordinated efforts of several organizations. The key components of the strategy included the introduction of a pest management standard ‘A Code of Practice for the Control of Bed Bug Infestations in Australia’ that defines and promotes ‘best practice’ in bed bug eradication, the development of a policy and procedural guide for accommodation providers, education of stakeholders in best management practices, and research. These strategies continue to evolve with developments that lead to improvements in ‘best practice’ while bed bugs remain problematic in Australia.

  19. Bed Bugs: The Australian Response.

    Science.gov (United States)

    Doggett, Stephen L; Orton, Christopher J; Lilly, David G; Russell, Richard C

    2011-04-15

    Australia has experienced a sudden and unexpected resurgence in bed bug infestations from both Cimex lectularius L. and Cimex hemipterus F. A survey in 2006 revealed that infestations had increased across the nation by an average of 4,500% since the start of the decade. In response, a multi-disciplinary approach to combat the rise of this public health pest was implemented and involved the coordinated efforts of several organizations. The key components of the strategy included the introduction of a pest management standard 'A Code of Practice for the Control of Bed Bug Infestations in Australia' that defines and promotes 'best practice' in bed bug eradication, the development of a policy and procedural guide for accommodation providers, education of stakeholders in best management practices, and research. These strategies continue to evolve with developments that lead to improvements in 'best practice' while bed bugs remain problematic in Australia.

  20. Print a Bed Bug Card

    Science.gov (United States)

    Two sets of business card-sized lists of tips for prevention of bed bug infestations, one for general use around home, the other for travelers. Print a single card or a page of cards for distribution.

  1. Torsion testing of bed joints

    DEFF Research Database (Denmark)

    Hansen, Klavs Feilberg; Pedersen, Carsten Mørk

    2008-01-01

    This paper describes a simple test method for determining the torsion strength of a single bed joint between two bricks and presents results from testing using this test method. The setup for the torsion test is well defined, require minimal preparation of the test specimen and the test can...... be carried out directly in a normal testing machine. The torsion strength is believed to be the most important parameter in out-of-plane resistance of masonry walls subjected to bending about an axis perpendicular to the bed joints. The paper also contains a few test results from bending of small walls about...... an axis perpendicular to the bed joints, which indicate the close connection between these results and results from torsion tests. These characteristics make the torsion strength well suited to act as substitute parameter for the bending strength of masonry about an axis perpendicular to the bed joints....

  2. Better backs by better beds?

    DEFF Research Database (Denmark)

    Bergholdt, Kim; Fabricius, Rasmus N; Bendix, Tom

    2008-01-01

    using the probably most relevant "worst case" data. There were no relevant difference between the effects of the water bed and the foam bed. CONCLUSION: The Waterbed and foam mattress' did influence back symptoms, function and sleep more positively as apposed to the hard mattress, but the differences...... mattresses have a positive effect on LBP, and especially a hard mattress is commonly believed to have a positive effect. METHODS: One hundred sixty CLBP patients were randomized to 1 of 3 groups, having a mattress/bed mounted in their sleeping room for 1 month. The beds were: (1) waterbed (Akva), (2) body......-conforming foam mattress (Tempur), and (3) a hard mattress (Innovation Futon). At baseline and after 4 weeks, a blinded observer interviewed the patients on LBP levels (0-10), daily function (activities of daily living, 0-30), and on the amount of sleeping hours/night. RESULTS: Because of dropout of 19 patients...

  3. Sea bed mapping and inspection

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The conference has 24 presentations on the topics: Sea bed mapping, inspection, positioning, hydrography, marine archaeology, remote operation vehicles and computerized simulation technologies, oil field activities and plans, technological experiences and problems. (tk)

  4. Bed bugs in healthcare settings.

    Science.gov (United States)

    Munoz-Price, L Silvia; Safdar, Nasia; Beier, John C; Doggett, Stephen L

    2012-11-01

    Infestations caused by bed bugs have resurfaced during the past decade across all continents. Even though bed bugs primarily cause skin manifestations in humans, a major stigma is placed upon people or institutions found to carry them. It is important for healthcare facilities to be prepared for this pest by implementing policies, carefully selecting materials used for hospital furniture, and educating providers on early identification and control.

  5. Bedømmelsens kompleksitet

    Directory of Open Access Journals (Sweden)

    Elsa Schmidt

    2006-03-01

    Full Text Available I artiklen sammenholdes hverdagens bedømmelser af mennesker med de bedømmelser, der sker ved eksaminer. Der er forskelle på grund af det retlige grundlag, men også ligheder. Konkrete erfaringer med klage- og ankesager gennem 8 år fra faget psykologi på landsplan opsummeres. Nogle få praktiske løsninger beskrives.

  6. Dual Fluidized Bed Biomass Gasification

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-30

    The dual fluidized bed reactor is a recirculating system in which one half of the unit operates as a steam pyrolysis device for biomass. The pyrolysis occurs by introducing biomass and steam to a hot fluidized bed of inert material such as coarse sand. Syngas is produced during the pyrolysis and exits the top of the reactor with the steam. A crossover arm, fed by gravity, moves sand and char from the pyrolyzer to the second fluidized bed. This sand bed uses blown air to combust the char. The exit stream from this side of the reactor is carbon dioxide, water and ash. There is a second gravity fed crossover arm to return sand to the pyrolysis side. The recirculating action of the sand and the char is the key to the operation of the dual fluidized bed reactor. The objective of the project was to design and construct a dual fluidized bed prototype reactor from literature information and in discussion with established experts in the field. That would be appropriate in scale and operation to measure the relative performance of the gasification of biomass and low ranked coals to produce a high quality synthesis gas with no dilution from nitrogen or combustion products.

  7. Breaking of storm waves on sand and reef zone in the Lesser Antilles Arc

    Science.gov (United States)

    Dorville, Jean-François; Berthelot, Hugues; Zahibo, Narcisse

    2010-05-01

    The most part of the exposed coastal zone of the Lesser Antilles Arc are composed by sand and coral reef. The high frequencies of passage of cyclones near these islands and anticyclone's swell subject them to waves of large amplitude. These waves are 4 to 5 times lager to the normal conditions. The weak slopes observed on these zones are particularly sensitive to this type of waves and cause the process of surfing. The mode of dissipation of these waves influenced the run-up and the floods on the coast. The surf zones are situated in 5 in 20 meters of the line of coast. A displacement of sea water towards the coast line is provoked by the breaking of the waves. These quantities of water are held by the particularly bathymetry of these islands and provoke a raised of the sea level. The propagation of the waves are allowed by the sea elevation in the surf zone In the evaluation of the marine risk in the Lesser Antilles Arc, a model of sea state forecast are developed in the Laboratory of Geosciences and Energy (LaRGE) in the French West Indies and French Guiana University (Guadeloupe , FWI). This forecast model is based on the coupling of several numerical models. WaveWatch III and SWAN are used for the wave propagation on large and small sectors. An ocean circulation model based on POM is used to evaluate the sea current and the sea level. To improve the forecasts on the exposed coast, in the zone included between the surf and swash, the sea elevation induced by the large amplitude wave are particularly studies. The numerical model of wave propagation near the coast SWAN is used to determine the sea state before the surf zone. The dissipation and the breaking of the large amplitude waves are studied with the spectral values give by SWAN and the local conditions (bathymetry, sea level, slope, bottom friction). During the months of November and December 2009, several large amplitude waves, coming from the North Atlantic Ocean, impact the west coast of Guadeloupe. The

  8. FY-2015 Methyl Iodide Deep-Bed Adsorption Test Report

    Energy Technology Data Exchange (ETDEWEB)

    Soelberg, Nicholas Ray [Idaho National Lab. (INL), Idaho Falls, ID (United States); Watson, Tony Leroy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-30

    Nuclear fission produces fission and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Deep-bed methyl iodide adsorption testing has continued in Fiscal Year 2015 according to a multi-laboratory methyl iodide adsorption test plan. Updates to the deep-bed test system have also been performed to enable the inclusion of evaporated HNO3 and increased NO2 concentrations in future tests. This report summarizes the result of those activities. Test results showed that iodine adsorption from gaseous methyl iodide using reduced silver zeolite (AgZ) resulted in initial iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) under 1,000 for the conditions of the long-duration test performed this year (45 ppm CH3I, 1,000 ppm each NO and NO2, very low H2O levels [3 ppm] in balance air). The mass transfer zone depth exceeded the cumulative 5-inch depth of 4 bed segments, which is deeper than the 2-4 inch depth estimated for the mass transfer zone for adsorbing I2 using AgZ in prior deep-bed tests. The maximum iodine adsorption capacity for the AgZ under the conditions of this test was 6.2% (6.2 g adsorbed I per 100 g sorbent). The maximum Ag utilization was 51%. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  9. On the use of the fictitious wave steepness and related surf-similarity parameters in methods that describe the hydraulic and structural response to waves

    NARCIS (Netherlands)

    Heineke, D.; Verhagen, H.J.

    2007-01-01

    To assess the hydraulic performance of coastal structures - viz. wave run-up, overtopping and reflection - and to evaluate the stability of the armour layers, use is made of the dimensionless surf similarity parameter, as introduced by Battjes (1974). The front side slope of the structure and the wa

  10. On the use of the fictitious wave steepness and related surf-similarity parameters in methods that describe the hydraulic and structural response to waves

    NARCIS (Netherlands)

    Heineke, D.; Verhagen, H.J.

    2007-01-01

    To assess the hydraulic performance of coastal structures - viz. wave run-up, overtopping and reflection - and to evaluate the stability of the armour layers, use is made of the dimensionless surf similarity parameter, as introduced by Battjes (1974). The front side slope of the structure and the

  11. Single particle behaviour in circulating fluidized bed combustors

    DEFF Research Database (Denmark)

    Erik Weinell, Claus

    1994-01-01

    of fuel particles in a boiler. A cold pilot scale model of a circulating fluidized bed combustor was used. Here sand was recirculated by means of air. Pressure measurements along the riser determined suspension density. A radioactive tracking facility to determined the dynamic picture of the particle....... The tracer particles moved between the zones with a mean frequency of ca. 1 Hz. The upwards particle velocity in the upper dilute transport zone decreased with particle size and density, resulting in a decreased number of particle observations for the larger particles with the riser height. The particles...... kept their axial course within relatively short ranges but this pattern was wiped out at larger distances. The mean particle residence time in the zone above and below the secondary air inlet was almost independent of particle characteristics, but was proportional to the magnitude of the internal...

  12. 49 CFR 236.336 - Locking bed.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Locking bed. 236.336 Section 236.336 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Instructions § 236.336 Locking bed. The various parts of the locking bed, locking bed supports, and tappet...

  13. Use of modular amphibious vehicles for conducting research in coastal zone

    Science.gov (United States)

    Zeziulin, Denis; Makarov, Vladimir; Belyaev, Alexander; Beresnev, Pavel; Kurkin, Andrey

    2016-04-01

    The project aims to create workable running systems of research complexes, moving along the bottom of coastal areas (in shallow waters) for investigation of waves, currents, sediment transport; investigation of ecosystems and biodiversity assessment of organisms; inspection and monitoring environmental conditions and anthropogenic load on nature; bathymetric studies. With all the variety of functional capabilities of modern robotic systems, possibilities of their application in the context of the study of coastal zones are extremely limited. Conducting research using aerial vehicles is limited to safety conditions of flight. Use of floating robotic systems in environmental monitoring and ecosystem research is only possible in conditions of relatively «soft» wave climate of the coastal zone. For these purposes, there are special amphibians such as remote-controlled vehicle Surf Rover [Daily, William R., Mark A. Johnson, and Daniel A. Oslecki. «Initial Development of an Amphibious ROV for Use in Big Surf.» Marine Technology Society 28.1 (1994): 3-10. Print.], mobile system MARC-1 [«The SPROV'er.» Florida Institute of Technology: Department of Marine and. Environmental Systems. Web. 05 May 2010.]. The paper describes methodological approaches to the selection of the design parameters of a new system.

  14. Rapid ignition of fluidized bed boiler

    Science.gov (United States)

    Osborn, Liman D.

    1976-12-14

    A fluidized bed boiler is started up by directing into the static bed of inert and carbonaceous granules a downwardly angled burner so that the hot gases cause spouting. Air is introduced into the bed at a rate insufficient to fluidize the entire bed. Three regions are now formed in the bed, a region of lowest gas resistance, a fluidized region and a static region with a mobile region at the interface of the fluidized and static regions. Particles are transferred by the spouting action to form a conical heap with the carbonaceous granules concentrated at the top. The hot burner gases ignite the carbonaceous matter on the top of the bed which becomes distributed in the bed by the spouting action and bed movement. Thereafter the rate of air introduction is increased to fluidize the entire bed, the spouter/burner is shut off, and the entire fluidized bed is ignited.

  15. Modified boundary conditions and field equations for a 2D surf beat model

    NARCIS (Netherlands)

    Petit, H.A.H.; Klopman, G.; Battjes, J.A.

    2001-01-01

    This progress report refers to work done at the Fluid IVlechanics Section within the framework of the Netherlands Centre for Coastal Research (NCK). In the coastal zone the long wave motion may contribute significantly to the morpho-dynamics, due to its strong correlation with the short wave motion

  16. 76 FR 65180 - Proposed Information Collection; Comment Request; Application to Shuck Surf Clams/Ocean Quahogs...

    Science.gov (United States)

    2011-10-20

    ... Exclusive Economic Zone (EEZ) of the Northeastern United States through the Atlantic Surfclam and Ocean...). Affected Public: Business or other for-profit organizations. Estimated Number of Respondents: 205... proposed collection of information is necessary for the proper performance of the functions of the...

  17. Zoning Districts, Zoning, Published in 2002, Freelance.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Zoning Districts dataset, was produced all or in part from Hardcopy Maps information as of 2002. It is described as 'Zoning'. Data by this publisher are often...

  18. Feasibility study - Lowered bed temperature in Fluidised Bed boilers for waste; Foerstudie - Saenkt baeddtemperatur i FB-pannor foer avfallsfoerbraenning

    Energy Technology Data Exchange (ETDEWEB)

    Niklasson, Fredrik

    2009-01-15

    Waste incineration generally serves two purposes; 1) dispose of waste and 2) generation of heat and power. In the process of power production from waste fuels, the steam temperatures in super heaters are generally limited by the severe fouling and corrosion that occurs at elevated material temperatures, caused by high concentrations of alkali metals and chloride in the flue gas and fly ash. The overall aim of a continuation of present project is to determine if a reduced temperature of the bed zone in a fluidized bed waste incinerator reduces the amount of alkali chlorides in the flue gas. If so, a reduced bed temperature might enable increased steam temperature in super heaters, or, at unchanged steam temperature, improve the lifespan of the super heaters. The results from the project are of interest for plant owners wishing to improve performance of existing plants. The results may also be used to modify the design of future plants by boiler manufacturers. The aim of present pre-study was to determine how far the bed temperature can be reduced in a waste fired fluidized bed boiler in Boraas while maintaining a stable operation with sufficient combustion temperature in the freeboard to fulfil the directives of waste incineration. A continuation of the project will be based on the results from present study. The work is based on experiments at the test boiler. During the present study, no other measurements were performed apart from some sampling of bed material and ashes at different modes of operation. The experiments show that it is possible to alter the air and recycled flue gas in such a manner that the bed temperature is reduced from about 870 deg C to 700 deg C at 100% load and normal fuel mixture, while fulfilling the directive of 850 deg C at 2 seconds. Within normal variations of the fuel properties, however, the bed temperature increases to somewhat above 700 deg C if the fuel turns dry, while it falls below 650 deg C when the fuel turns wet. With

  19. Model for boiling and dryout in particle beds. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Lipinski, R. J.

    1982-06-01

    Over the last ten years experiments and modeling of dryout in particle beds have produced over fifty papers. Considering only volume-heated beds, over 250 dryout measurements have been made, and are listed in this work. In addition, fifteen models to predict dryout have been produced and are discussed. A model is developed in this report for one-dimensional boiling and dryout in a porous medium. It is based on conservation laws for mass, momentum, and energy. The initial coupled differential equations are reduced to a single first-order differential equation with an algebraic equation for the upper boundary condition. The model includes the effects of both laminar and turbulent flow, two-phase friction, and capillary force. The boundary condition at the bed bottom includes the possibility of inflowing liquid and either an adiabatic or a bottom-cooled support structure. The top of the bed may be either channeled or subcooled. In the first case the channel length and the saturation at the base of the channels are predicted. In the latter case, a criterion for penetration of the subcooled zone by channels is obtained.

  20. Recomendações de Gestão dos Recifes Artificiais para a Prática do Surfe

    Directory of Open Access Journals (Sweden)

    Marco Antonio Moraes Ocke

    2016-05-01

    Full Text Available Os recifes artificiais são estruturas afundadas em ambiente marinho a fim de oferecer múltiplos usos e beneficiar um maior número de usuários. Entretanto, sua capacidade de propiciar melhores condições de surfe tem sido a principal característica atrativa para experiências já realizadas em alguns países do mundo. Neste contexto, esta pesquisa tem o objetivo de apresentar um conjunto de recomendações que possam contribuir com gestores públicos e privados que planejam incluir a implantação de recifes artificiais tendo como foco a melhoria nas condições de surfe em suas localidades. Para tanto, esta pesquisa qualitativa exploratória se desenvolve a partir de breve revisão teórica sobre o tema e de um estudo de casos múltiplos – Austrália, Estados Unidos, Nova Zelândia, India e Inglaterra - para sustentar o raciocínio. Os resultados incluem o caráter inovador deste tipo de estrutura demandando um aprimoramento nos métodos de construção e gestão, programas de monitoramento de longo prazo para avaliação de eficácia, desafios na integração de usuários, participação pública nas diferentes etapas do processo, gestão das expectativas dos mercados envolvidos. Uma vez que poucos estudos referentes ao tema foram desenvolvidos até o presente momento, as análises presentes neste trabalho podem contribuir com o preenchimento desta lacuna no conhecimento.

  1. Effect of a flow-corrective insert on the flow pattern in a pebble bed reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yu; Gui, Nan; Yang, Xingtuan [Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University, Beijing 100084 (China); Tu, Jiyuan [Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University, Beijing 100084 (China); School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Melbourne 3083, VIC (Australia); Jiang, Shengyao, E-mail: shengyaojiang@sina.com [Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University, Beijing 100084 (China)

    2016-04-15

    Highlights: • Effect of an insert on improving flow uniformity and eliminating stagnant zone is studied. • Three values concerned with the stagnant zone, radial uniformity and flow sequence are used. • Outlet diameter is a critical parameter that determines balancing mechanism of the insert. • Height/location is varied to let the insert work in unbalanced region and avoid adverse effect. - Abstract: A flow-corrective insert is adopted in the pebble-bed high temperature gas-cooled reactor (HTGR) to improve flow performance of the pebble flow for the first time. 3D discrete element method (DEM) modeling is employed to study this slow and dense granular flow. It is verified that locating a properly designed insert in the bed can help transform unsatisfactory flow field to the preferred flow pattern for pebble bed reactors. Three characteristic values on the stagnant zone, radial uniformity and flow sequence of pebble flow are defined to evaluate uniformity of the overall flow field quantitatively. The results demonstrate that the pebble bed equipped with an insert performs better than normal beds from all these three aspects. Moreover, based on numerical experiments, several universal tips for insert design on height, location and outlet diameter are suggested.

  2. Competitive Fixed-Bed Adsorption of Pb(II), Cu(II), and Ni(II) from Aqueous Solution Using Chitosan-Coated Bentonite

    OpenAIRE

    Wan-Chi Tsai; Mark Daniel G. de Luna; Bermillo-Arriesgado, Hanna Lee P.; Futalan, Cybelle M.; Colades, James I.; Meng-Wei Wan

    2016-01-01

    Fixed-bed adsorption studies using chitosan-coated bentonite (CCB) as adsorbent media were investigated for the simultaneous adsorption of Pb(II), Cu(II), and Ni(II) from a multimetal system. The effects of operational parameters such as bed height, flow rate, and initial concentration on the length of mass transfer zone, breakthrough time, exhaustion time, and adsorption capacity at breakthrough were evaluated. With increasing bed height and decreasing flow rate and initial concentration, th...

  3. Designing a CR Test bed

    DEFF Research Database (Denmark)

    2014-01-01

    Research on intelligent and reconfigurable wireless systems is in continuous evolution. Nevertheless, in order to fix some keystones, more and more researchers are entering the idea of research-oriented test beds. Unfortunately, it is very difficult for a wide number of research groups to start w...

  4. Laboratory rearing of bed bugs

    Science.gov (United States)

    The resurgence of bed bugs Cimex lectularius L. in the United States and worldwide has resulted in an increase in research by university, government, and industry scientists directed at the biology and control of this blood-sucking pest. A need has subsequently arisen for producing sufficient biolog...

  5. How to Find Bed Bugs

    Science.gov (United States)

    Find and correctly identify an infestation early before it becomes widespread. Look for rusty or reddish stains and pinpoint dark spots on bed sheets or mattresses, and search for bugs near the piping, seams and tags of the mattress and box spring.

  6. Experimental investigation of a draft tube spouted bed for effects of geometric parameters on operation

    DEFF Research Database (Denmark)

    Azizaddini, Seyednezamaddin; Lin, Weigang; Dam-Johansen, Kim

    2016-01-01

    Experiments are performed in a draft tube spouted bed (DTSB) to investigate effects of the operating conditions and the geometric parameters on the hydrodynamics. Geometry parameters, such as heights of the entrained zone, draft tube inner diameter, inner angle of the conical section were studied...

  7. Impact of different discharge patterns on bed occupancy rate and bed waiting time: a simulation approach.

    Science.gov (United States)

    Zhu, Zhecheng

    2011-01-01

    Beds are one of the most important resources in a healthcare system. How to manage beds efficiently is an important indicator of the efficiency of the healthcare system. Bed management is challenging to many healthcare service providers in many aspects. In recent years, population growth and aging society impose extra pressure on bed requirement. There are usually two key performance indicators of a bed management system: bed occupancy rate and bed waiting time. In this paper, different discharge patterns and their impacts on the bed occupancy rate and bed waiting time are studied. A discrete event simulation model is constructed to evaluate the existing discharge pattern in a Singapore regional hospital using actual hospital admission and discharge transaction data. Then different discharge patterns are tested in the same context. Simulation results show that a proper discharge pattern significantly smoothes the fluctuation of bed occupancy rate and reduce the bed waiting time.

  8. Initial prediction of dust production in pebble bed reactors

    Directory of Open Access Journals (Sweden)

    M. Rostamian

    2011-09-01

    Full Text Available This paper describes the computational simulation of contact zones between pebbles in a pebble bed reactor. In this type of reactor, the potential for graphite dust generation from frictional contact of graphite pebbles and the subsequent transport of dust and fission products can cause significant safety issues at very high temperatures around 900 °C in HTRs. The present simulation is an initial attempt to quantify the amount of nuclear grade graphite dust produced within a very high temperature reactor.

  9. Pulling a patient up in bed

    Science.gov (United States)

    Moving a patient in bed ... takes at least 2 people to safely move a patient up in bed. Friction from rubbing can ... A slide sheet is the best way to prevent friction. If you do not have one, you ...

  10. EMERGING TECHNOLOGY BULLETIN: SPOUTED BED REACTOR

    Science.gov (United States)

    The Spouted Bed Reactor (SBR) technology utilizes the unique attributes of the "spouting " fluidization regime, which can provide heat transfer rates comparable to traditional fluid beds, while providing robust circulation of highly heterogeneous solids, concurrent with very agg...

  11. Find a Bed Bug Pesticide Product

    Science.gov (United States)

    Introduces the Bed Bug Product Search Tool, to help consumers find EPA-registered pesticides for bed bug infestation control. Inclusion in this database is not an endorsement. Always follow label directions carefully.

  12. Bed Bug Guidance for School Nurses

    Science.gov (United States)

    School nurses are often called upon to provide vital information to students, parents, teachers, and administrators. These tips on identifying, managing and preventing bed bugs will help you to effectively respond if bed bugs appear in your school.

  13. Videos, Webinars, Blogs Related to Bed Bugs

    Science.gov (United States)

    These tools provide practical insight on issues such as integrated pest management (IPM) for schools, bed bug bites, how carpet beetles can help, bed bugs as hitchhikers, and preventing and controlling infestations.

  14. Chinese Bedding Technology Standard under Drafting

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    National Home Textile Standardization Technology Committee(NHTSTC)set up its Bedding Branch Committee. This will promote the work of Chinese bedding technology standardization and a symbol that China step up to meet the

  15. [Historical analysis of the hospital bed].

    Science.gov (United States)

    Fajardo-Ortiz, Guillermo; Fajardo-Dolci, Germán

    2010-01-01

    Until now the bed has been the basic physical resource in hospitals. This type of furniture has served to study and treat patients, through out the centuries it has undergone changes in the materials they are made of dimensions, functionality, accessories, aesthetic, and design. The hospital bed history is not well known, there are thousands of documents about the evolution of hospitals, but not enough is known about hospital beds, a link between the past and the present. The medical, anthropological, technological, social, and economic dynamics and knowledge have produced a variety of beds in general and hospital beds in particular. From instinctive, rustic, poor and irregular "sites" that have differed in shape and size they had evolved into ergonomic equipment. The history of the hospital bed reflects the culture, techniques and human thinking. Current hospital beds include several types: for adults, for children, for labor, for intensive therapy, emergency purposes, census and non census beds etc.

  16. Combustion of low grade fractions of Lubnica coal in fluidized bed

    Directory of Open Access Journals (Sweden)

    Mladenović Milica R.

    2012-01-01

    Full Text Available In this paper a method of examination of fuel suitability for fluidized bed combustion is presented. The research of combustion characteristics of low grade fractions of Lubnica brown coal in the fluidized bed by the aforementioned methodology has been carried out on a laboratory semi-industrial apparatus of 200 kWt. Description of the experimental fluidized bed combustion facility is given, as well as experimental results, with the focus on furnace temperature distribution, in order to determine the location of the zone of intensive combustion. Based on investigation results, which are focused on combustion quality (combustion completion as well as on satisfying the environmental protection criteria, it can be stated that the investigated coal is suitable for burning in bubbling, as well as in circulating fluidized bed.

  17. Characteristics of fluidized-packed beds

    Science.gov (United States)

    Gabor, J. D.; Mecham, W. J.

    1968-01-01

    Study of fluidized-packed bed includes investigation of heat transfer, solids-gas mixing, and elutriation characteristics. A fluidized-packed bed is a system involving the fluidization of small particles in the voids of a packed bed of larger nonfluidized particles.

  18. Fluidization quality analyzer for fluidized beds

    Science.gov (United States)

    Daw, C. Stuart; Hawk, James A.

    1995-01-01

    A control loop and fluidization quality analyzer for a fluidized bed utilizes time varying pressure drop measurements. A fast-response pressure transducer measures the overall bed pressure drop, or over some segment of the bed, and the pressure drop signal is processed to produce an output voltage which changes with the degree of fluidization turbulence.

  19. Bed Bug Education for School Maintenance

    Science.gov (United States)

    Henriksen, Missy

    2012-01-01

    Bed bugs are a growing problem, not only in homes and hotels, but also in schools and colleges. Facility administrators and staff need to understand the bed bug resurgence and develop best practices to deal with an infestation. In this article, the author offers tips for preventing and treating bed bugs in school and university settings.

  20. Bed Bug Education for School Maintenance

    Science.gov (United States)

    Henriksen, Missy

    2012-01-01

    Bed bugs are a growing problem, not only in homes and hotels, but also in schools and colleges. Facility administrators and staff need to understand the bed bug resurgence and develop best practices to deal with an infestation. In this article, the author offers tips for preventing and treating bed bugs in school and university settings.

  1. 21 CFR 868.5180 - Rocking bed.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rocking bed. 868.5180 Section 868.5180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5180 Rocking bed. (a) Identification. A rocking bed is a...

  2. 21 CFR 880.6070 - Bed board.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bed board. 880.6070 Section 880.6070 Food and... GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous Devices § 880.6070 Bed board. (a) Identification. A bed board is a device intended for medical purposes that consists...

  3. Logging Evaluation of the Ordovician Carbonate Reservoir Beds in the Lungudong Region,Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    YANG Wenjing; XIAO Chengwen; LIU Luofu; QI Guangzhong; JIANG Zhenxue; YUAN Yunchun; WANG Weili; YANG Song

    2010-01-01

    In recent years,great progress has been made constantly in oil and gas exploration in the Lungudong region of the Tarim Basin.However,progress has been slow in the evaluation of its main oil-producing horizons-the Ordovician carbonate reservoir beds.Based on previous researches and on the various data such as drilling,geology and oil test,in combination with the interpretation of each single-well imaging and conventional logging data,and through analysis and comparison,the identification methods in imaging and conventional logging for four types of carbonate reservoir beds in this region are summarized in this paper.Calculation formulas for four reservoir bed parameters,i.e.shale content,porosity,permeability and oil saturation in this region are proposed;and reservoir beds in this region are divided into three levels (Ⅰ,Ⅱ and Ⅲ) by combining oil test data and logging data,The lower limits of the effective porosity of reservoir beds and the fracture porosity of effective reservoir beds are determined as 1.8% and 0.04%,respectively.The physical property parameters are calculated by conventional logging curves,and the most advantageous areas for reservoir development are predicted comprehensively.On the plane,the high-value zones of reservoir bed parameters are mainly concentrated in the N-S-trending strike-slip fault,the Sangtamu fault horst zone and near the LG38 well area;vertically,the reservoir bed parameters of the Yijianfang Formation are better than those of the Yingshan and Lianglitage formations.

  4. Lignite air-steam gasification in the fluidized bed of iron-containing slag catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, B.N.; Shchipko, M.L.; Golovin, Yu. [Inst. of Chemistry of Natural Organic Materials, Academgorodok, Krasnoyarsk (Russian Federation)

    1995-12-01

    The influence of fluidized bed of iron-containing slag particles on air-steam gasification of powdered Kansk-Achinsk lignite in entrained flow was studied in pilot installation with productivity about 60 kg per hour. Slag of Martin process and boiler slag were used as catalytic active materials until their complete mechanical attrition. Two following methods of catalytic gasification of lignite were compared: the partial gasification in stationary fluidized bed of slag particles with degree of fuel conversion 40-70% and complete gasification in circulating bed of slag particles. In the first case only the most reactive part of fuel is gasified with the simultaneously formation of porous carbon residue with good sorption ability. It was found the catalytic fluidized bed improves heat transfer from combustion to reduction zone of gas-generator and increases the rate of fuel conversion at the temperature range 900-1000{degrees}C. At these temperatures the degree of conversion is depended considerably on the duration time of fuel particles in the catalytic fluidized bed. The influence of catalytic fluidized bed height and velocity of reaction mixture on the temperature profiles in the gas-generator was studied. The optimal relationship was found between the fluidized bed height and velocity of flow which makes possible to produce the gas with higher calorific value at maximum degree of fuel conversion.

  5. Review of acute cancer beds.

    LENUS (Irish Health Repository)

    Evans, D S

    2012-01-01

    A review of admissions to cancer services at University Hospital Galway (UHG) was undertaken to assess the appropriateness of hospital usage. All cancer specialty patients admitted from 26-28 May 2009 were reviewed (n = 82). Chi square tests, Exact tests, and One-way ANOVA were utilised to analyse key issues emerging from the data. Fifty (61%) were classified as emergencies. Twenty three (67%) occupied a designated cancer bed with 24 (30%) in outlying non-oncology wards. The mean length of stay was 29.3 days. Possible alternatives to admission were identified for 15 (19%) patients. There was no evidence of discharge planning for 50 (60%) admissions. There is considerable potential to make more appropriate utilisation of UHG for cancer patients, particularly in terms of reducing bed days and length of stay and the proportion of emergency cancer admissions, and further developing integrated systems of discharge planning.

  6. Review of acute cancer beds.

    LENUS (Irish Health Repository)

    Evans, D S

    2012-01-01

    A review of admissions to cancer services at University Hospital Galway (UHG) was undertaken to assess the appropriateness of hospital usage. All cancer specialty patients admitted from 26-28 May 2009 were reviewed (n = 82). Chi square tests, Exact tests, and One-way ANOVA were utilised to analyse key issues emerging from the data. Fifty (61%) were classified as emergencies. Twenty three (67%) occupied a designated cancer bed with 24 (30%) in outlying non-oncology wards. The mean length of stay was 29.3 days. Possible alternatives to admission were identified for 15 (19%) patients. There was no evidence of discharge planning for 50 (60%) admissions. There is considerable potential to make more appropriate utilisation of UHG for cancer patients, particularly in terms of reducing bed days and length of stay and the proportion of emergency cancer admissions, and further developing integrated systems of discharge planning.

  7. THE BAUXITES AND JELAR - BEDS

    Directory of Open Access Journals (Sweden)

    Krešimir Sakač

    1993-12-01

    Full Text Available Minor bauxite deposits and occurrences were formed in technically disturbed environments in the middle part of the Adriatic geotectonic unit in Dinarides, contemporary with the clastic Jelar-beds in the Late Lutetian time. Uneven chemical composition of these Eocene bauxites, their sporadic occurrences in developed paleorelief as well as characteristic petrographic composition of the immediate overlying rocks point out at different genetical conditions (the paper is published in Croatian.

  8. FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS

    Institute of Scientific and Technical Information of China (English)

    Rajkumar V. RAIKAR; Subhasish DEY

    2004-01-01

    Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.

  9. Agglomeration-Free Distributor for Fluidized Beds

    Science.gov (United States)

    Ouyang, F.; Sinica, A.; Levenspiel, O.

    1986-01-01

    New gas distributor for fluidized beds prevents hot particles from reacting on it and forming hard crust. In reduction of iron ore in fluidized bed, ore particles do not sinter on distributor and perhaps clog it or otherwise interfere with gas flow. Distributor also relatively cool. In fluidized-bed production of silicon, inflowing silane does not decompose until within bed of hot silicon particles and deposits on them. Plates of spiral distributor arranged to direct incoming gas into spiral flow. Turbulence in flow reduces frequency of contact between fluidized-bed particles and distributor.

  10. Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates...

  11. Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates...

  12. The Design and Implementation of a Semi-Autonomous Surf-Zone Robot Using Advanced Sensors and a Common Robot Operating System

    Science.gov (United States)

    2011-06-01

    the entire robot. The torque of the motor and gearing allowed the tail to lift the entire rear of the robot. Dynamic tests were conducted to...associated drive assembly. Each assem- bly contains a belt and pulley configuration that transfers torque from the drive assembly to each WhegTM. It...watertight integrity of the overall design. This single unit will encase the servo drive gears shielding it from debris and sand and thus preventing damage

  13. Wave breaking in the surf zone and deep-water in a non-hydrostatic RANS model. Part 1: Organized wave motions

    Science.gov (United States)

    Derakhti, Morteza; Kirby, James T.; Shi, Fengyan; Ma, Gangfeng

    2016-11-01

    We examine wave-breaking predictions ranging from shallow- to deep-water conditions using a non-hydrostatic σ-coordinate RANS model NHWAVE as described in Derakhti et al. (2016a), comparing results both with corresponding experiments and with the results of a volume-of-fluid (VOF)/Navier-Stokes solver (Ma et al., 2011; Derakhti and Kirby, 2014a,b). Our study includes regular and irregular depth-limited breaking waves on planar and barred beaches as well as steepness-limited unsteady breaking focused wave packets in intermediate and deep water. In Part 1 of this paper, it is shown that the model resolves organized wave motions in terms of free-surface evolution, spectral evolution, organized wave velocity evolution and wave statistics, using a few vertical σ-levels. In addition, the relative contribution of modeled physical dissipation and numerical dissipation to the integral breaking-induced wave energy loss is discussed. In steepness-limited unsteady breaking focused wave packets, the turbulence model has not been triggered, and all the dissipation is imposed indirectly by the numerical scheme. Although the total wave-breaking-induced energy dissipation is underestimated in the unsteady wave packets, the model is capable of predicting the dispersive and nonlinear properties of different wave packet components before and after the break point, as well as the overall wave height decay and the evolution of organized wave velocity field and power spectrum density over the breaking region. In Part 2 (Derakhti et al., 2016b), model reproduction of wave-breaking-induced turbulence and mean circulation is examined in detail. The same equations and numerical methods are used for the various depth regimes, and no ad-hoc treatment, such as imposing hydrostatic conditions, is involved in triggering breaking. Vertical grid resolution in all simulated cases is at least an order of magnitude coarser than that of typical VOF-based simulations.

  14. Equilibrium bed-concentration of nonuniform sediment

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Knowledge of the equilibrium bed-concentration is vital to mathematical modeling of the river-bed deformation associated with suspended load but previous investigations only dealt with the reference concentration of uniform sediment because of difficulties in observation of the bed-concentration. This work is a first attempt to develop a theoretical formula for the equilibrium bed-concentration of any fraction of nonuniform sediment defined at the bed-surface. The formula is based on a stochastic-mechanistic model for the exchange of nonuniform sediment near the bed, and described as a function of incipient motion probability, non-ceasing probability, pick-up probability, and the ratio of the average single-step continuous motion time to static time. Comparison of bed-concentration calculated from the proposed formula with the measured data showed satisfactory agreement, indicating the present formula can be used for solving the differential equation governing the motion of suspended load.

  15. Theoretical and Experimental Substantiation for Applicability of a Damping Layer in a Foundation Slab Placed on Soil Bed

    Directory of Open Access Journals (Sweden)

    Kiselev Nikita

    2016-01-01

    Full Text Available Authors present the results of studies of innovative foundation structure. The idea of how to increase the operational quality of foundations and reduce the costs due to rational loading of the soil bed is numerically simulated. It is shown that the bending moment in the foundation slab depends on uneven settlements of the soil bed. It is proposed to stabilize the deformable soil bed by the damping layer placed under the slab footing in the zones with minor settlements. Considered is the concept of the damping layer in the foundation slab placed on the soil bed (DLS. The in-situ test for DLS-clayey bed interaction is described. Given are the results obtained after the experiments for DLS performance. The result of DLS implementation in designing the foundation of the 22-storeyed block of flats is considered. The expediency of DLS in comparison to standard foundations is presented.

  16. Novel designs of fluidized bed combustors for low pollutant emissions

    Energy Technology Data Exchange (ETDEWEB)

    Lin, W.; Bleek, C.M. van den [Delft Univ. of Technology (Netherlands). Dept. of Chemical Engineering; Dam-Johansen, K. [Technical Univ. of Denmark, Lyngby (Denmark). Dept. of Chemical Engineering

    1995-12-31

    It is known that NH{sub 3}, released during the devolatilization of fuel, is an important precursor for NO formation in fluidized bed combustors. On the other hand, NH{sub 3} may be used as a reducing agent in the thermal DeNO{sub x} process to reduce NO{sub x} emission levels. In this paper, a new concept of fluidized bed combustors is proposed based on the idea of in situ reduction of NO{sub x} by self-produced NH{sub 3} from fuel without lowering the sulfur capture level. This design is intended to separate the NH{sub 3} release process under reducing conditions from the char combustion process under oxidizing conditions; this self-released NH{sub 3}, together with some combustibles, is mixed with gaseous combustion products in the upper part of the combustor for a further reduction of the NO{sub x} formed during combustion. Furthermore, the combustion of the combustibles may cause the temperature to rise in this upper zone and thereby reduce the emission of N{sub 2}O. The applications of this design to bubbling and circulating fluidized bed combustors are described and the mechanisms of the main reactions involved discussed.

  17. Novel simulated moving-bed method for reduced solvent consumption.

    Science.gov (United States)

    Jensen, T B; Reijns, T G; Billiet, H A; van der Wielen, L A

    2000-03-24

    Simulated moving-bed (SMB) chromatography is attractive for reducing sorbent and solvent consumption relative to fixed-bed systems. In this contribution, we describe a novel and versatile method for further reducing solvent consumption in the case of reversed-phase chromatography. The method is based on the variation of the distribution coefficients of solutes to be separated upon varying the composition of a multi-component mobile phase. If the solvent strength of the desorbent is set higher than the solvent strength of the feed, the components will have smaller distribution coefficients in the extraction section of the SMB and hence will be more easily eluted. This will result in a lower desorbent flow and possibly also in a shorter desorbent zone, and, ultimately, in more concentrated products. The so-called "Triangle-method" by Storti et al. [AIChE J., 39 (1993) 471] to obtain the region of complete separation, is extended for this novel SMB method. Theoretical evaluation of the proposed methodology supports the anticipated solvent reduction relative to fixed-bed RP-HPLC for the cases of the purification of the polyketide antibiotic nystatin and the separation of bovine insulin from porcine insulin.

  18. 生物质鼓泡流化床和循环流化床气化对比试验%Comparison of Bubbling Fluidized Bed and Circulating Fluidized Bed in Gasification of Biomass

    Institute of Scientific and Technical Information of China (English)

    范晓旭; 贤建伟; 初雷哲; 杨立国

    2011-01-01

    在内径为φ0.2 m、高6 m的流化床装置上,利用两种不同粒径的石英砂,分别进行了高速鼓泡流化床(BFB)和循环流化床(CFB)的冷态压力分布试验和热态气化试验.结果表明:冷态试验中,鼓泡流化床压力分布主要集中在底部的密相区,循环流化床压力分布更趋均匀.热态稳定气化阶段,循环流化床轴向温差只有40℃,气化的燃气热值、碳转化率和气化效率均高于鼓泡流化床.%The results from biomass gasification in a pilot-scale (6m tall × 0. 2 m internal diameter) air-blown circulating fluidized bed gasifier was tested and compared with bubbling fluidized bed gasifier. The results showed that the diameters of bed material in bubbling fluidized bed and circulating fluidized bed were different. The bubbling fluidized bed had a dense zone and bed material was homogeneous distribution in circulating fluidized bed. The temperature of the circulating fluidized bed was more uniform than bubbling fluidized bed. The carbon conversion rate, gasification efficiency and low gas heat value of circulating fluidized bed were larger than that of bubbling fluidized bed gasifier.

  19. Feature description with SIFT, SURF, BRIEF, BRISK, or FREAK? A general question answered for bone age assessment.

    Science.gov (United States)

    Kashif, Muhammad; Deserno, Thomas M; Haak, Daniel; Jonas, Stephan

    2016-01-01

    Solving problems in medical image processing is either generic (being applicable to many problems) or specific (optimized for a certain task). For example, bone age assessment (BAA) on hand radiographs is a frequent but cumbersome task for radiologists. For this problem, many specific solutions have been proposed. However, general-purpose feature descriptors are used in many computer vision applications. Hence, the aim of this study is (i) to compare the five leading keypoint descriptors on BAA, and, in doing so, (ii) presenting a generic approach for a specific task. Two methods for keypoint selection were applied: sparse and dense feature points. For each type, SIFT, SURF, BRIEF, BRISK, and FREAK feature descriptors were extracted within the epiphyseal regions of interest (eROI). Classification was performed using a support vector machine. Reference data (1101 radiographs) of the University of Southern California was used for 5-fold cross-validation. The data was grouped into 30 classes representing the bone age range of 0-18 years. With a mean error of 0.605 years, dense SIFT gave best results and outperforms all published methods. The accuracy was 98.36% within the range of 2 years. Dense SIFT represents a generic method for a specific question.

  20. Rancang Bangun Game Aksi dengan Integrasi dan Pengenalan Gambar Menggunakan Algoritma Ekstraksi Fitur SURF dan Klasifikasi SVM pada Perangkat Android

    Directory of Open Access Journals (Sweden)

    Bryan Nandriawan

    2017-01-01

    Full Text Available Saat ini perangkat mobile berbasis Android dan iOS sangat digemari oleh anak-anak. Mereka yang telah memiliki perangkat mobile akan menghabiskan seluruh waktunya untuk menatap layar perangkat saat bermain. Akibat yang ditimbulkan adalah penurunan kesehatan mata dan kurangnya bersosialisasi dengan teman sebaya. Menggambar adalah hal yang disukai anak-anak. Dengan menggabungkan menggambar dengan permainan perangkat mobile, anak-anak akan tetap merasa bermain meski mereka sedang tidak menatap layar untuk menggambar. Tugas akhir ini bertujuan untuk membangun sebuah permainan yang dapat mengenali gambar dan menggunakan gambar tersebut dalam permainan. Metode pengenalan gambar dalam tugas akhir ini dilakukan dengan menggunakan metode Edge Detection dengan algoritma ekstraksi fitur SURF (Speeded-Up Robust Features dan klasifikasi SVM (Support Vector Machine. Jenis permainan yang dibangun merupakan gabungan dari aksi dan tower defense. Hasil dari tugas akhir ini dibagi menjadi 3 yaitu hasil fungsionalitas permainan, hasil daya tarik permainan dan hasil akurasi pengenalan gambar. Semua fungsi yang dibuat pada permainan dapat berjalan dengan baik, dan permainan juga telah memiliki daya tarik yang memikat. Namun hasil akurasi pengenalan gambar masih kurang dari harapan penulis.

  1. PADDLING PERFORMANCE AND RANKING POSITION IN JUNIOR SURFERS COMPETING AT THE ASSOCIATION OF SURFING PROFESSIONALS: A PILOT STUDY

    Directory of Open Access Journals (Sweden)

    Jesús Cámara

    2011-11-01

    Full Text Available Abstract  The aims of this pilot study are on one hand, to evaluate the upper body aerobic characteristics of junior surfers competing at the European branch of the Association of Surfing Professionals (ASP and on the other, to assess the relationship between the junior surfers' upper body aerobic characteristics and their ranking position. Ten surfers competing at the European junior branch of the ASP took part in the study. The maximal oxygen uptake (VO2MAX, the maximum power output (WMAX, the maximum lactate concentration [La]MAX, the maximum heart rate (HRMAX and the power output at the intensity where the lactate threshold and the onset of blood lactate accumulation are produced (WLT and WOBLA were determined during an incremental maximal test in a swim bench ergometer. It was observed a lack of a significant relationship between the ranking position and the parameters at maximal intensity (VO2PEAK, WMAX, HRMAX y [La]MAX. The WLT (W · kg-1 and the WOBLA (W · kg-1 were significantly related to ranking position (r= -0.69, p= 0.02; r= -0.72, p= 0.01, respectively.

  2. Self-organizing maps and VolSurf approach to predict aldose reductase inhibition by flavonoid compounds

    Directory of Open Access Journals (Sweden)

    Luciana Scotti

    2011-02-01

    Full Text Available Aldose Reductase (AR is the polyol pathway key enzyme which converts glucose to sorbitol. High glucose availability in insulin resistant tissues in diabetes leads into an accumulation of sorbitol, which has been associated with typical chronic complications of this disease, such as neuropathy, nephropathy and retinopathy. In this study, 71 flavonoids AR inhibitors were subjected to two methods of SAR to verify crucial substituents. The first method used the PCA (Principal Component Analysis to elucidate physical and chemical characteristics in the molecules that would be essential for the activity, employing VolSurf descriptors. The rate obtained explained 53% of the system total variance and revealed that a hydrophobic-hydrophilic balance in the molecules is required, since very polar or nonpolar substituents decrease the activity. Artificial Neural Networks (ANNs was also employed to determine key substituents by evaluating substitution patterns, using NMR data. This study had a high success rate (85% accuracy in the training set and 88% accuracy in the test set and showed polihydroxilations are essential for high activity and methoxylations and glicosilations primarily at positions C7, C3' and C4' decrease the activity.

  3. Phase 2 Methyl Iodide Deep-Bed Adsorption Tests

    Energy Technology Data Exchange (ETDEWEB)

    Soelberg, Nick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Watson, Tony [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    Nuclear fission produces fission products (FPs) and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the second phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during the second half of Fiscal Year (FY) 2014. Test results continue to show that methyl iodide adsorption using AgZ can achieve total iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) above 1,000, until breakthrough occurred. However, mass transfer zone depths are deeper for methyl iodide adsorption compared to diatomic iodine (I2) adsorption. Methyl iodide DFs for the Ag Aerogel test adsorption efficiencies were less than 1,000, and the methyl iodide mass transfer zone depth exceeded 8 inches. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption under various conditions specified in the methyl iodide test plan, and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  4. Hospital Bed Type, the Electronic Medical Record, and Safe Bed Elevation in the Intensive Care Setting.

    Science.gov (United States)

    Fitch, Zachary W; Duquaine, Damon; Ohkuma, Rika; Schneider, Eric B; Whitman, Glenn J R

    2016-01-01

    In mechanically ventilated patients, head of bed (HOB) elevation above 30° decreases the risk of ventilator-associated pneumonia. The research team studied (a) compliance with proper HOB elevation in their cardiac surgical intensive care unit, (b) the accuracy of HOB angles recorded in the electronic medical record (EMR), and (c) the effect of bed type on (a) and (b). Nurses were polled to discover how HOB angles were measured in practice. HOB angles were compliant in 80% of observations. Compliance was more frequent in beds with side-of-bed angle indicators (SBI) than beds with under-bed angle indicators (UBI; 88% vs 77%, P = .04). Charting in the EMR was accurate in 50% of SBI bed observations but only 20% of UBI bed observations (P bed type. Bedside indicators are underutilized. © The Author(s) 2014.

  5. The Safety of Hospital Beds: Ingress, Egress, and In-Bed Mobility.

    Science.gov (United States)

    Morse, Janice M; Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K; Bloswick, Donald

    2015-01-01

    To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients' ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients' use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated.

  6. Deep Bed Iodine Sorbent Testing FY 2011 Report

    Energy Technology Data Exchange (ETDEWEB)

    Nick Soelberg; Tony Watson

    2011-08-01

    Nuclear fission results in the production of fission products (FPs) and activation products that increasingly interfere with the fission process as their concentrations increase. Some of these fission and activation products tend to evolve in gaseous species during used nuclear fuel reprocessing. Analyses have shown that I129, due to its radioactivity, high potential mobility in the environment, and high longevity (half life of 15.7 million years), can require control efficiencies of up to 1,000x or higher to meet regulatory emission limits. Deep-bed iodine sorption testing has been done to evaluate the performance of solid sorbents for capturing iodine in off-gas streams from nuclear fuel reprocessing plants. The objectives of the FY 2011 deep bed iodine sorbent testing are: (1) Evaluate sorbents for iodine capture under various conditions of gas compositions and operating temperature (determine sorption efficiencies, capacities, and mass transfer zone depths); and (2) Generate data for dynamic iodine sorption modeling. Three tests performed this fiscal year on silver zeolite light phase (AgZ-LP) sorbent are reported here. Additional tests are still in progress and can be reported in a revision of this report or a future report. Testing was somewhat delayed and limited this year due to initial activities to address some questions of prior testing, and due to a period of maintenance for the on-line GC. Each test consisted of (a) flowing a synthetic blend of gases designed to be similar to an aqueous dissolver off-gas stream over the sorbent contained in three separate bed segments in series, (b) measuring each bed inlet and outlet gas concentrations of iodine and methyl iodide (the two surrogates of iodine gas species considered most representative of iodine species expected in dissolver off-gas), (c) operating for a long enough time to achieve breakthrough of the iodine species from at least one (preferably the first two) bed segments, and (d) post-test purging

  7. The Berlin emissivity database (BED)

    Science.gov (United States)

    Maturilli, A.; Helbert, J.; Moroz, L.

    2008-03-01

    Remote-sensing infrared spectroscopy is the principal field of investigation for planetary surfaces composition. Past, present and future missions to the solar system bodies include in their payload, instruments measuring the emerging radiation in the infrared range. Apart from measuring the reflected radiance, more and more spacecrafts are equipped with instruments measuring directly the emitted radiation from the planetary surface. The emitted radiation is not only a function of the composition of the material but also of its texture and especially the grain size distribution. For the interpretation of the measured data an emissivity spectral library of planetary analogue materials in grain size fractions appropriate for planetary surfaces is needed. The Berlin emissivity database (BED) presented here is focused on relatively fine-grained size separates, providing thereby a realistic basis for the interpretation of thermal emission spectra of planetary regoliths. The BED is therefore complimentary to existing thermal emission libraries, like the ASU library for example. BED currently contains emissivity spectra of plagioclase and potassium feldspars, low Ca and high Ca pyroxenes, olivine, elemental sulfur, Martian analogue minerals and volcanic soils, and a lunar highland soil sample measured in the wavelength range from 7 to 22 μm as a function of particle size. For each sample we measured the spectra of four particle size separates ranging from <25 to 250 μm. The device we used is built at DLR (Berlin) and is coupled to a Fourier-transform infrared spectrometer Bruker IFS 88 purged with dry air and equipped with a nitrogen-cooled MCT detector. All spectra were acquired with a spectral resolution of 4 cm -1. We are currently working on upgrading our emissivity facility. A new spectrometer (Bruker VERTEX 80 V) and new detectors will allow us to measure the emissivity of samples in the wavelength range from 1 to 50 μm in a vacuum environment. This will be

  8. Designing a CR Test bed

    DEFF Research Database (Denmark)

    2014-01-01

    with their own set up, since the potential costs and efforts could not pay back in term of expected research results. Software Defined Radio solutions offer an easy way to communication researchers for the development of customized research test beds. While several hardware products are commercially available......, the software is most of the times open source and ready to use for third party users. Even though the software solution developers claim complete easiness in the development of custom applications, in reality there are a number of practical hardware and software issues that research groups need to face, before...... inspiration to researchers on how to possibly build their own customized systems....

  9. [Special beds. Pulmonary therapy system].

    Science.gov (United States)

    Calixto Rodríguez, Joaquín; Rodríguez Martínez, Xavier; Marín i Vivó, Gemma; Paunellas Albert, Josep

    2008-10-01

    To be bedridden reduces one's capacity to move and produces muscular debility that affects the respiratory system leading to a decreased effectiveness in expectoration, the ability to spit up sputum. The pulmonary therapy system integrated in a bed is the result of applying motorized elements to the articulation points of the bad in order to achieve safe positions at therapeutic angles, which improve the breathing-perfusion (blood flow) relationship. This system also makes it possible to apply vibration waves to the patient which favor the elimination of bronchial-pulmonary secretions, the rehabilitation of the bedridden patient and decrease the work load for nursing personnel.

  10. Physical-Mathematical Model for Fixed-Bed Solid Fuel Gasification Process Simulation

    Directory of Open Access Journals (Sweden)

    Slyusarskiy Konstantin V.

    2017-01-01

    Full Text Available Phycial-mathmatical model for fixed-bed coal gasification process simulation is proposed. The heterogeneous carbon oxidation chemical reactions were simulated via Arrhenius equation while homogeneous reactions in gas phase were calculated using Gibbs free energy minimization procedure. The syngas component concentration field and fuel conversion distribution as well as syngas final temperature and composition were defined for fixed bed gasification of T-grade coal of Kuznetskiy deposit. The optimal fuel residence time and gasifyer specific productivity were defined. The prevail reactions in oxidizing and reduction zones together with its height were defined.

  11. Hydrodynamics of gas-solids downflow fluidized bed (downer) reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, H.

    1999-07-01

    This study presents a semi-empirical model for the hydrodynamic flow structure in a circulating fluidized bed downer reactor. Circulating fluidized bed, or riser reactors are used in the petroleum industry for many applications including catalytic cracking, polyethylene production, calcination operations and combustion of a variety of fuels. The work in this thesis involved the development of a circulating fluidized bed riser and downer system that enables hydrodynamic studies to be carried out. The system was designed to incorporate both a riser and a downer in the same circulating operation, making it possible to conduct experimental studies on the riser and the downer separately or simultaneously. The hydrodynamics of the gas-solids downflow fluidized bed reactor were studied in a 9.3 m tall and 0.1 m i.d. circulating fluidized bed downer reactor using fluidized cracking catalyst (FCC) particles. In order to characterize the gas-solids flow structures, the following three parameters were measured: the radial distributions of the local solids holdups, the local particle velocities, and the pressure gradients along the downer column. The hydrodynamics in the co-current downflow reactor was also studied under a wide range of operating conditions. The gas-solids flow structure under zero superficial gas velocity conditions was characterized by measuring the radial distribution of the local solids holdups and particle velocities along the downer column with the superficial gas velocity set to zero. The results indicate that two basic flow regimes exist in the FCC downer system depending on the superficial gas velocity. The downer reactor was shown to have a more uniform radial flow structure compared to the riser. It also has a more uniform radial distribution of solids holdup and particle velocity as well as solids flux in both the development and fully developed zones. The highly uniform radial flow structure provides a nearly ideal plug flow condition in the

  12. Zoning Districts - Volusia County HUB Zones

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Historically Underutilized Business (HUB) Zones in Volusia County. Go to http://www.sba.gov/hubzone or contact the Department of Economic Development (386) 248-8048...

  13. Suicide following an infestation of bed bugs.

    Science.gov (United States)

    Burrows, Stephanie; Perron, Stéphane; Susser, Stephanie

    2013-01-01

    Male, 62. Bipolar disorder. Bordeline personality disorder. - Bed bug infestation. Psychiatry. Unusual clinical course. In the past decade, bed bug infestations have been increasingly common in high income countries. Psychological consequences of these infestations are rarely examined in the scientific literature. We present a case, based on a coroner's investigation report, of a woman with previous psychiatric morbidity who jumped to her death following repeated bed bug infestations in her apartment. Our case report shows that the bed bug infestations were the likely trigger for the onset a negative psychological state that ultimately led to suicide. Given the recent surge in infestations, rapid action needs to be taken not only in an attempt to control and eradicate the bed bugs but also to adequately care for those infested by bed bugs.

  14. Classifying bed inclination using pressure images.

    Science.gov (United States)

    Baran Pouyan, M; Ostadabbas, S; Nourani, M; Pompeo, M

    2014-01-01

    Pressure ulcer is one of the most prevalent problems for bed-bound patients in hospitals and nursing homes. Pressure ulcers are painful for patients and costly for healthcare systems. Accurate in-bed posture analysis can significantly help in preventing pressure ulcers. Specifically, bed inclination (back angle) is a factor contributing to pressure ulcer development. In this paper, an efficient methodology is proposed to classify bed inclination. Our approach uses pressure values collected from a commercial pressure mat system. Then, by applying a number of image processing and machine learning techniques, the approximate degree of bed is estimated and classified. The proposed algorithm was tested on 15 subjects with various sizes and weights. The experimental results indicate that our method predicts bed inclination in three classes with 80.3% average accuracy.

  15. Simulation of biomass-steam gasification in fluidized bed reactors: Model setup, comparisons and preliminary predictions.

    Science.gov (United States)

    Yan, Linbo; Lim, C Jim; Yue, Guangxi; He, Boshu; Grace, John R

    2016-12-01

    A user-defined solver integrating the solid-gas surface reactions and the multi-phase particle-in-cell (MP-PIC) approach is built based on the OpenFOAM software. The solver is tested against experiments. Then, biomass-steam gasification in a dual fluidized bed (DFB) gasifier is preliminarily predicted. It is found that the predictions agree well with the experimental results. The bed material circulation loop in the DFB can form automatically and the bed height is about 1m. The voidage gradually increases along the height of the bed zone in the bubbling fluidized bed (BFB) of the DFB. The U-bend and cyclone can separate the syngas in the BFB and the flue gas in the circulating fluidized bed. The concentration of the gasification products is relatively higher in the conical transition section, and the dry and nitrogen-free syngas at the BFB outlet is predicted to be composed of 55% H2, 20% CO, 20% CO2 and 5% CH4.

  16. Packed fluidized bed blanket for fusion reactor

    Science.gov (United States)

    Chi, John W. H.

    1984-01-01

    A packed fluidized bed blanket for a fusion reactor providing for efficient radiation absorption for energy recovery, efficient neutron absorption for nuclear transformations, ease of blanket removal, processing and replacement, and on-line fueling/refueling. The blanket of the reactor contains a bed of stationary particles during reactor operation, cooled by a radial flow of coolant. During fueling/refueling, an axial flow is introduced into the bed in stages at various axial locations to fluidize the bed. When desired, the fluidization flow can be used to remove particles from the blanket.

  17. Backfill-simulated moving bed operation for improving the separation performance of simulated moving bed chromatography.

    Science.gov (United States)

    Kim, Kyung-Min; Lee, Chang-Ha

    2013-10-11

    The Backfill-SMB (BF-SMB) strategy was designed to improve the separation performance of simulated moving bed (SMB) chromatography. In the BF-SMB operation, a limited amount of products from raffinate and/or extract was re-fed to the SMB circuit as a backfill-feed. Two additional operating variables, backfill ratio (BR) and backfill length (BL), were suggested to determine the amount and injection length of backfill-feed. This strategy was applied to a four-zone SMB with one column (1-1-1-1) and two columns (2-2-2-2) per zone using a binary mixture with a nonlinear isotherm. Various BF-SMB operational methods were designed to supply backfill-feed to the feed node and/or intermediate node. The separation performances of conventional SMB and BF-SMB were compared in terms of purity, recovery, and eluent consumption. The BF-SMB successfully improved the separation performance of the conventional SMB because backfill-feed led to the rich condition of the main component at each product withdrawal node. Due to the 'TMB effect' caused by backfill-feed, the BF-SMB operation was more efficient in the 1-1-1-1 configuration than in the 2-2-2-2 configuration, showing maximum improvement of 5-7% purity and recovery from the performance of conventional SMB. In addition, partial recycling of eluent by backfill-feed resulted in a decrease in eluent consumption up to 10% even with improved purity and recovery in BF-SMB. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. CERTS Microgrid Laboratory Test Bed

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joe; Lasseter, Robert; Schenkman, Ben; Stevens, John; Klapp, Dave; Volkommer, Harry; Linton, Ed; Hurtado, Hector; Roy, Jean

    2009-06-18

    The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2) an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources. These techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations,and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults. The results from these tests are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field

  19. C. elegans BED domain transcription factor BED-3 controls lineage-specific cell proliferation during organogenesis

    OpenAIRE

    Inoue, Takao; Sternberg, Paul W.

    2010-01-01

    The control of cell division is critical to organogenesis, but how this control is achieved is not fully understood. We found that mutations in bed-3, encoding a BED Zn-finger domain transcription factor, confer a phenotype where a specific set of cell divisions during vulval organogenesis is lost. Unlike general cell cycle regulators in Caenorhabditis elegans, the function of bed-3 is restricted to specific lineages. Transcriptional reporters suggest that bed-3 is expressed in a limited numb...

  20. Fluidized-bed combustion of gasification residue

    Energy Technology Data Exchange (ETDEWEB)

    Kudjoi, A.; Heinolainen, A.; Hippinen, I.; Lu, Y. [Helsinki University of Technology, Espoo (Finland). Lab. of Energy Economics and Power Plant Engineering

    1998-12-31

    Hybrid combined cycle processes have been presented as possibilities for power generation in the future. In the processes based on partial gasification of coal, the solid materials removed from a gasifier (i.e. fly ash and bed char) contain unburned fuel, which is burned either in an atmospheric or a pressurised fluidised-bed. Pressurised fluidised-bed (PFB) combustion of gasification residues were studied experimentally by Helsinki University of Technology. The gasification residues, i.e. cyclone fines and bed chars, came from pilot scale PFB gasification tests of bituminous coals. The combustion efficiency was high in cyclone fines combustion. The calcium sulphide oxidised effectively to calcium sulphate in the combustion of cyclone fines. In bed char combustion the residual sulphide contents in solids after combustion were still relatively high. In general, sulphur dioxide emissions in residue combustion were low. The recarbonation of calcium oxide was observed in bed char combustion. Fuel-N conversion to NO{sub x} during bed char combustion and in most of the test runs with cyclone fines was higher than in bituminous coal combustion. In bed char combustion the conversion was significantly higher than in cyclone fines combustion. NO{sub x} emissions increased with increasing excess air for both residues, as was expected. In bed char combustion the highest NO{sub x} emissions were measured at higher pressure. Calculated mass reactivity values of equal particle size of all bed chars studied had similar trends with burnout. The biggest particles had the lowest reactivity values throughout the combustion, while reactivity for finer particles was at considerably higher level and sharply increases with burnout. In the constant combustion conditions used in the tests, no significant differences were observed in rate-controlling mechanisms for bed char fractions studied. 25 refs., 13 figs., 15 tab.

  1. Flue gas desulfurization by rotating beds

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, N.; Keyvani, M.; Coskundeniz, A.

    1992-01-01

    The operating and mass transfer characteristics of rotating foam metal beds were studied to determine the potential for flue gas desulfurization. This is a final technical report on the work supported by DOE [number sign]FG22-87-PC79924. The report is divided into two sections, Part 1 deals primarily with the operating characteristics of rotating beds, and Part 2 covers the mass transfer characteristics of S0[sub 2] absorption in water-lime slurries. Rotating foam metal beds are in essence packed towers operated in high gravitational fields. The foam metal bed is in the form of a cylindrical donut, or torus, and is rotated to produced the high centrifugal forces. The liquid phase enters the bed at the inner surface of the torus and is pulled by the field through the bed. Gas flows countercurrent to the liquid. The bed packing can have a very large specific surface areas and not flood. Possible benefits include much smaller height of a transfer unit resulting in smaller equipment and supporting structures, reduced solvent inventory, faster response with improved process control, reduced pressure drop, and shorter startup and shut-down times. This work is concerned broadly with the operating characteristics of rotating beds, the objectives being to (1) determine the pressure drop through the rotating bed; (2) determine the power required to operate the beds, (3) investigate the residence time distribution of the liquid phase in the beds; and (4) determine the mass transfer coefficients of S0[sub 2] absorption. Three packings of differing specific surface areas were studied, with areas ranging from 656 to 2952 m[sub 2]/m[sub 3]. Liquid flow rates to 36 kg/s*m[sub 2], gas flow rate to 2.2 kg/s*m[sub 2], and gravitational fields to 300 g were covered in this study.

  2. CERTS Microgrid Laboratory Test Bed

    Energy Technology Data Exchange (ETDEWEB)

    ETO, J.; LASSETER, R.; SCHENKMAN, B.; STEVENS, J.; KLAPP, D.; VOLKOMMER, H.; LINTON, E.; HURTADO, H.; ROY, J.

    2010-06-08

    The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1 a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2 an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3 a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources.

  3. Metabolic Resistance in Bed Bugs

    Directory of Open Access Journals (Sweden)

    Omprakash Mittapalli

    2011-03-01

    Full Text Available Blood-feeding insects have evolved resistance to various insecticides (organochlorines, pyrethroids, carbamates, etc. through gene mutations and increased metabolism. Bed bugs (Cimex lectularius are hematophagous ectoparasites that are poised to become one of the major pests in households throughout the United States. Currently, C. lectularius has attained a high global impact status due to its sudden and rampant resurgence. Resistance to pesticides is one factor implicated in this phenomenon. Although much emphasis has been placed on target sensitivity, little to no knowledge is available on the role of key metabolic players (e.g., cytochrome P450s and glutathione S-transferases towards pesticide resistance in C. lectularius. In this review, we discuss different modes of resistance (target sensitivity, penetration resistance, behavioral resistance, and metabolic resistance with more emphasis on metabolic resistance.

  4. Metabolic Resistance in Bed Bugs.

    Science.gov (United States)

    Mamidala, Praveen; Jones, Susan C; Mittapalli, Omprakash

    2011-03-18

    Blood-feeding insects have evolved resistance to various insecticides (organochlorines, pyrethroids, carbamates, etc.) through gene mutations and increased metabolism. Bed bugs (Cimex lectularius) are hematophagous ectoparasites that are poised to become one of the major pests in households throughout the United States. Currently, C. lectularius has attained a high global impact status due to its sudden and rampant resurgence. Resistance to pesticides is one factor implicated in this phenomenon. Although much emphasis has been placed on target sensitivity, little to no knowledge is available on the role of key metabolic players (e.g., cytochrome P450s and glutathione S-transferases) towards pesticide resistance in C. lectularius. In this review, we discuss different modes of resistance (target sensitivity, penetration resistance, behavioral resistance, and metabolic resistance) with more emphasis on metabolic resistance.

  5. Physician-patient communication in single-bedded versus four-bedded hospital rooms.

    NARCIS (Netherlands)

    Glind, I. van de; Dulmen, S. van; Goossensen, A.

    2008-01-01

    Objective: To examine whether physician-patient communication in multi-bedded rooms differs from communication in single rooms during ward rounds. Methods: Ward rounds in single bedded patient rooms and ward rounds in four bedded rooms were audiotaped and analyzed with an adapted version of MIARS.

  6. SURF-based position estimation method using aerial image sequences.%基于SURF特征的航空序列图像位置估计算法

    Institute of Scientific and Technical Information of China (English)

    乔奎贤; 赵妮; 李耀军

    2013-01-01

    视觉传感器在航空无人机导航和定位任务中应用越来越广泛。针对无人机位置参数估计问题,提出了一种基于SURF特征的图像配准算法,该算法能够适应航空序列图像的旋转、尺度变换及噪声干扰,实现无人机位置的精确估计。构建了SURF尺度空间,运用快速Hessian矩阵定位极值点,计算出航空图像的64维SURF特征描述子;基于Hessian矩阵迹完成特征点匹配;使用RANSAC算法剔除出格点,实现位置参数的精确估计。通过航空图像序列实测数据位置估计实验,验证了该算法的有效性。%Vision sensor is widely used in the aviation aircraft navigation and positioning tasks. For position parameter estima-tion of aircraft, this paper presents a SURF feature based image registration algorithm, it is able to adapt to aerial image sequence rotation, scale transformation and noise, to achieve accurate estimates of aircraft position. It builds SURF scale space, uses fast Hessian matrix maximum values to calculate 64-dimensional SURF feature descriptors of aerial images. Based on the trace of the Hessian matrix, it completes feature points matching task. By using RANSAC algorithm, it removes the outliers matching points for accurate position estimate. Experiments with two real aerial image sequences show the effectiveness of the proposed position estimation algorithm.

  7. 基于SURF算子的快速手背静脉识别%Fast recognition of hand vein with SURF descriptors

    Institute of Scientific and Technical Information of China (English)

    李秀艳; 刘铁根; 邓仕超; 何瑾; 王云新

    2011-01-01

    A recognition algorithm for hand vein based on speeded-up robust features( SURF) was proposed. Firstly,the region of interest ( ROI) of the hand vein image is obtained through image preprocessing. The local SURF features of test sample and register samples are extracted and matched based on Euclid distance, and then the mismatching pairs are rejected. Finally, the matching rate is calculated as the similarity between registered sample and test sample to realize personal identity recognition. The recognition performance was evaluated in verification mode using TJU hand vein image database, the equal error rate ( EER) is 0.07% and average recognition time is 0.153 s. Experimental results show that the proposed algorithm is able to realize hand vein recognition reliably and quickly.%提出基于加速鲁棒性特征(speeded-up robustfeatures,SURF)的手背静脉识别算法.首先对手背静脉图像进行预处理,提取手背静脉感兴趣区域(ROI),然后提取手背静脉的局部SURF特征,基于欧式距离实现测试样本和注册样本特征点的匹配,并剔除错误匹配对,最后计算匹配率作为待识别样本和注册样本之间的相似度测试实现身份识别.利用TJU手背静脉图像数据库对算法性能进行测试,在认证模式下等错率为0.07%,平均识别时间0.153 s.实验结果证明该算法可以快速有效地实现手背静脉识别.

  8. 基于特性分析的SURF加速方法研究%RESEARCH ON SPEED-UP METHOD OF SURF THROUGH PROPERTIES ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    胡益斌; 肖菁; 戴卓方; 李戈; 张为华

    2012-01-01

    To resolve the problem of a little bit low speed the typical image feature extraction algorithm SURF (speeded up robust feature) has, in the paper we do an in-depth analysis on the algorithm properties in regard to its running time, instruction type, memory access, hot spots,and etc. On this basis, we optimise the SURF algorithm by reconstructing the judgment logic, the memory accessing and data organisations,the library functions implementation and other strategies. Moreover,we analyse the role of speedup of each optimisation strategy on the algorithm through experiments. And experimental data show that these optimisation strategies can effectively improve the running efficiency of SURF in the premise of guaranteeing 100% accuracy of the algorithm, and 2. 75X ultimate performance improvement is achieved.%针对典型图像特征提取算法SURF速度偏慢的问题,深入分析该算法在运行时间、指令类型、内存访问、热点等方面的特性.在此基础上,运用重构判断逻辑、重构内存访问与数据组织形式、重构库函数实现等策略对SURF算法进行优化.并通过实验,分析各种优化策略对算法的加速作用.实验数据显示,这些优化策略可以在保证算法100%精确的前提下,有效地提高SURF算法的运行效率,最终达到2.75X的性能提升.

  9. Pulsed atmospheric fluidized bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    1989-11-01

    In order to verify the technical feasibility of the MTCI Pulsed Atmospheric Fluidized Bed Combustor technology, a laboratory-scale system was designed, built and tested. Important aspects of the operational and performance parameters of the system were established experimentally. A considerable amount of the effort was invested in the initial task of constructing an AFBC that would represent a reasonable baseline against which the performance of the PAFBC could be compared. A summary comparison of the performance and emissions data from the MTCI 2 ft {times} 2 ft facility (AFBC and PAFBC modes) with those from conventional BFBC (taller freeboard and recycle operation) and circulating fluidized bed combustion (CFBC) units is given in Table ES-1. The comparison is for typical high-volatile bituminous coals and sorbents of average reactivity. The values indicated for BFBC and CFBC were based on published information. The AFBC unit that was designed to act as a baseline for the comparison was indeed representative of the larger units even at the smaller scale for which it was designed. The PAFBC mode exhibited superior performance in relation to the AFBC mode. The higher combustion efficiency translates into reduced coal consumption and lower system operating cost; the improvement in sulfur capture implies less sorbent requirement and waste generation and in turn lower operating cost; lower NO{sub x} and CO emissions mean ease of site permitting; and greater steam-generation rate translates into less heat exchange surface area and reduced capital cost. Also, the PAFBC performance generally surpasses those of conventional BFBC, is comparable to CFBC in combustion and NO{sub x} emissions, and is better than CFBC in sulfur capture and CO emissions even at the scaled-down size used for the experimental feasibility tests.

  10. Bubbles trapped in a fluidized bed: Trajectories and contact area

    Science.gov (United States)

    Poryles, Raphaël; Vidal, Valérie; Varas, Germán

    2016-03-01

    This work investigates the dynamics of bubbles in a confined, immersed granular layer submitted to an ascending gas flow. In the stationary regime, a central fluidized zone of parabolic shape is observed, and the bubbles follow different dynamics: either the bubbles are initially formed outside the fluidized zone and do not exhibit any significant motion over the experimental time or they are located inside the fluidized bed, where they are entrained downwards and are, finally, captured by the central air channel. The dependence of the air volume trapped inside the fluidized zone, the bubble size, and the three-phase contact area on the gas injection flow rate and grain diameter are quantified. We find that the volume fraction of air trapped inside the fluidized region is roughly constant and of the order of 2%-3% when the gas flow rate and the grain size are varied. Contrary to intuition, the gas-liquid-solid contact area, normalized by the air injected into the system, decreases when the flow rate is increased, which may have significant importance in industrial applications.

  11. Some geological problems of bedded manganese ore deposits. Sojo mangankosho no chishitsugakuteki shomondai

    Energy Technology Data Exchange (ETDEWEB)

    Momoi, H. (Ehime University, Ehime (Japan). Faculty of Science)

    1991-09-15

    This paper summarizes the bedded manganese ore deposits in Japan and in the world. Chert-hosted bedded manganese ore deposits in the Chichibu terrane and similar terranes of the inner zone of Southwest Japan are characterized by numerous small deposits composed of rhodochrosite and manganese silicate ores. They are Triassic to Middle Jurassic in age. The deposits in Japan are, together with those of Coast Ranges in western part of North America, typical in the mobile belts of the world. On the other hand, giant bedded manganese deposits represented by Nikopol, South Ukraine and Groote Eylandt, Australia, occur in the inner parts of stable continents and in platforms and consist of manganese dioxide and rhodochrosite. The deposits in mobile belts and those in stable continents are very contrasting in the scale of deposits, distribution, ore, age, depositional environment and other features. 85 refs., 2 figs., 3 tabs.

  12. Effects of Fucus vesiculosus covering intertidal mussel beds in the Wadden Sea

    Science.gov (United States)

    Albrecht, A.; Reise, K.

    1994-06-01

    The brown alga Fucus vesiculosus forma mytili (Nienburg) Nienhuis covered about 70% of mussel bed ( Mytilus edulis) surface area in the lower intertidal zone of Königshafen, a sheltered sandy bay near the island of Sylt in the North Sea. Mean biomass in dense patches was 584 g ash-free dry weight m-2 in summer. On experimental mussel beds, fucoid cover enhanced mud accumulation and decreased mussel density. The position of mussels underneath algal canopy was mainly endobenthic (87% of mussels with >1/3 of shell sunk into mud). In the absence of fucoids, mussels generated epibenthic garlands (81% of mussels with Fucus vesiculosus on mussel beds in the intertidal Wadden Sea affects mussels and their epibionts negatively, but supports various herbivores and increases overall benthic diversity.

  13. A new fluid distribution system for scale-flexible expanded bed adsorption

    DEFF Research Database (Denmark)

    Hubbuch, Jürgen; Heebøll-Nielsen, Anders; Hobley, Timothy John

    2002-01-01

    A new fluid distribution system designed for expanded bed adsorption was introduced and studied in a 150-cm diameter column. Based on fluid application through a rotating distributor, it eradicates the need for perforated plates, meshes, or local mixers. The effect of rotation rate on column...... change in expansion characteristics as distributor rotation rate was increased from 2.5 to 10 rpm. The distributor was observed to generate a flow pattern suitable for expanded bed adsorption when the supports were fluidized at a superficial fluid velocity of 283 cm (.) h(-1) and dye pulses introduced....... At a rotation rate of 2.5 rpm, no significant dead zones were observed, and a discrete band was formed that moved up through the bed. Furthermore, the pattern of dye movement could be used to calculate interstitial linear fluid velocities of 460 cm (.) h(-1) and 572 cm (.) h(-1) at the column wall and center...

  14. Webpage Recommendation Model in Personal Surfing%个性化浏览中网页推荐的结构模型

    Institute of Scientific and Technical Information of China (English)

    苏贵洋; 王永成; 马颖华

    2003-01-01

    This paper first introduces the inevitability direction of Internet personal technique's development, and then analyzes the differences between Information Retrieval and Information Filtering. Further more, combining with the group user interests and individual user interests, using VSM and FCM algorithm, this paper proposes a webpage recommendation model in personal surfing. This model can be applied not only in single website, but also in enterprise information collecting system. It also brings forward a method to extend concept. The advantage of the model is automatic concepts learning in the processing of user's feedback and browsing. Contrasting to concept dictionary method, it is more agility and gains well retrieval results.

  15. Diversificação na gestão estratégica em microempresas de ensino do surfe: um estudo multicasos

    OpenAIRE

    Cruz, Ana Carolina Costa

    2015-01-01

    Podemos observar a existência de diversas estratégias que norteiam o desenvolvimento de um negócio. Uma delas é a diversificação. Esta dissertação apresenta um estudo da diversificação na gestão estratégica de microempresas de ensino do surfe (MEES) do Rio de Janeiro. No caso das MEES, há particularidades que tornam muito importante a diversificação para a sobrevivência e desenvolvimento delas. Por isso, escolhemos estudar o tema nesse tipo de empresa. A pesquisa analisou o processo de divers...

  16. ZoneLib

    DEFF Research Database (Denmark)

    Jessen, Jan Jacob; Schiøler, Henrik

    2006-01-01

    We present a dynamic model for climate in a livestock building divided into a number of zones, and a corresponding modular Simulink library (ZoneLib). While most literature in this area consider air flow as a control parameter we show how to model climate dynamics using actual control signals...... development of ZoneLib....

  17. Earliest Marine beds in the Jurassic sedimentary record near the Huajuapan-Petlalcingo region, southern Mexico and their paleogeographic implications

    Science.gov (United States)

    Contla, D.

    2008-12-01

    A paleogeographic model of Jurassic-Cretaceous is presented, the study area is the region near Huajuapan de Leon in the Mixteca Terrane, Mexico where a sedimentary successions constituted by interlayered terrestrial and marine beds, provides evidence of transgression and regression episodes. The sediments in the study zone were deposited over a Paleozoic metamorphic basement, the Acatlan Complex. The stratigraphic features in the Middle Jurassic of the terrestrial beds indicate a depositional elements varying from alluvial fans to floodplains and channel deposits, represented by conglomerates, sandy conglomerates and sandstones. After, in the same epoch (Bajocian and Bathonian age) a transgression coming from the Pacific Ocean covered the region. A transitional zone between continental and marine sediments is situated between Tezoatlan and Petlalcingo, the actual cross section consists in the earliest marine beds: limestones interlayered with terrestrial beds. Fossil contents in this beds indicate an age between the Oxfordian and the Tithonian. During this period of transgression the paleogeography was dominated by a small bay with shallow waters connected in the south with the Pacific Ocean, represented principally by limestone and dolomite units. At the end of the transgression, volcanic episodes occurred and the land emerged again. The sedimentary beds were later affected by tectonic activity that produced a normal fault near Zapotitlan, putting the metamorphic basement in contact with the sedimentary sequence.

  18. Generalized Fibonacci zone plates

    CERN Document Server

    Ke, Jie; Zhu, Jianqiang

    2015-01-01

    We propose a family of zone plates which are produced by the generalized Fibonacci sequences and their axial focusing properties are analyzed in detail. Compared with traditional Fresnel zone plates, the generalized Fibonacci zone plates present two axial foci with equal intensity. Besides, we propose an approach to adjust the axial locations of the two foci by means of different optical path difference, and further give the deterministic ratio of the two focal distances which attributes to their own generalized Fibonacci sequences. The generalized Fibonacci zone plates may allow for new applications in micro and nanophotonics.

  19. Shanghai's Development Zones

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Since the early 1980s,development zones began appearing in China.Their Success largely stems from the preferential policies they offer and the safe investment environment they work hard to create.As zones have personalities themselves,it is essential to look beyond the pamphlets and published information and get down to the nittygritty.Shanghai has more State designated Economic and Technology Development Zones than any other city in China.In the following article,we have chosen development zones located around Shanghai and conducted a comparison.

  20. Effective Thermal Conductivity of Adsorbent Packed Beds

    Science.gov (United States)

    Mori, Hideo; Hamamoto, Yoshinori; Yoshida, Suguru

    The effective thermal conductivity of adsorbent packed beds of granular zeolite 13X and granular silica gel A in the presence of stagnant steam or air was measured under different conditions of the adsorbent bed temperature, particle size and filler-gas pressure. The measured effective thermal conductivity showed to become smaller with decreasing particle size or decreasing pressure, but it was nearly independent of the bed temperature. When steam was the filler-gas, the rise in the thermal conductivity of the adsorbent particles due to steam adsorption led to the increase in the effective thermal conductivity of the bed, and this effect was not negligible at high steam pressure for the bed of large particle size. It was found that both the predictions of the effective thermal conductivity by the Hayashi et al.'s model and the Bauer-Schlünder model generally agreed well with the measurements, by considering the particle thermal conductivity rise due to steam adsorption. The thermal conductivity of a consolidated bed of granular zeolite 13X was also measured, and it was found to be much larger than that of the packed bed especially at lower pressure. The above prediction models underestimated the effective thermal conductivity of the consolidated bed.

  1. Gruppebaseret behandling af BED - et faseopdelt behandlingstilbud

    DEFF Research Database (Denmark)

    Laust, Jakob; Lau, Marianne Engelbrecht; Waaddegaard, Mette

    2015-01-01

    konsekvenser. BED blev i 2013 optaget i DSM-5 (Diagnostic and Statistical Manual of Mental Disorders) som en selvstændig diagnose og BED forventes medtaget i den forestående revision af det internationale diagnose system, ICD-11. Sundhedsstyrelsen gav på denne baggrund satspuljemidler til erfaringsopsamling...

  2. Particle Pressures in Fluidized Beds. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, C.S.; Rahman, K.; Jin, C.

    1996-09-01

    This project studies the particle pressure, which may be thought of as the force exerted by the particulate phase of a multiphase mixture, independently of that exerted by other phases. The project is divided into two parts, one concerning gas and the other liquid fluidized beds. Previous work on gas fluidized beds had suggested that the particle pressures are generated by bubbling action. Thus, for these gas fluidized bed studies, the particle pressure is measured around single bubbles generated in 2-D fluidized beds, using special probes developed especially for this purpose. Liquid beds are immune from bubbling and the particle pressures proved too small to measure directly. However, the major interest in particle pressures in liquid beds lies in their stabilizing effect that arises from the effective elasticity (the derivative of the particle pressure with respect to the void fraction): they impart to the bed. So rather than directly measure the particle pressure, we inferred the values of the elasticity from measurements of instability growth in liquid beds the inference was made by first developing a generic stability model (one with all the normally modeled coefficients left undetermined)and then working backwards to determine the unknown coefficients, including the elasticity.

  3. Hipparions of the Laetolil Beds, Tanzania

    NARCIS (Netherlands)

    Hooijer, D.A.

    1979-01-01

    The Laetolil Beds in Tanzania, 20-30 miles south of Olduvai Gorge, have been extensively sampled by parties under the leadership of Mrs. Dr. Mary D. Leakey, who very kindly sent me Hipparion material collected in 1974, 1975, and 1976. In a restudy of proboscidean material from these beds described

  4. Particle pressures in fluidized beds. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, C.S.; Rahman, K.; Jin, C.

    1996-09-01

    This project studies the particle pressure, which may be thought of as the force exerted by the particulate phase of a multiphase mixture, independently of that exerted by other phases. The project is divided into two parts, one concerning gas and the other liquid fluidized beds. Previous work on gas fluidized beds had suggested that the particle pressures are generated by bubbling action. Thus, for these gas fluidized bed studies, the particle pressure is measured around single bubbles generated in 2-D fluidized beds, using special probes developed especially for this purpose. Liquid beds are immune from bubbling and the particle pressures proved too small to measure directly. However, the major interest in particle pressures in liquid beds lies in their stabilizing effect that arises from the effective elasticity (the derivative of the particle pressure with respect to the void fraction), they impart to the bed. So rather than directly measure the particle pressure, the authors inferred the values of the elasticity from measurements of instability growth in liquid beds; the inference was made by first developing a generic stability model (one with all the normally modeled coefficients left undetermined) and then working backwards to determine the unknown coefficients, including the elasticity.

  5. Bed-levelling experiments with suspended load

    NARCIS (Netherlands)

    Talmon, A.M.; De Graaff, J.

    1991-01-01

    Bed-levelling experiments are conducted in a straight laboratory channel. The experiments involve a significant fraction of suspended sediment transport. The purpose of the experiments is to provide data for modelling of the direction of sediment transport on a transverse sloping alluvial river bed,

  6. Nonlinear dynamical characteristics of bed load motion

    Institute of Scientific and Technical Information of China (English)

    BAI; Yuchuan; XU; Haijue; XU; Dong

    2006-01-01

    Bed forms of various kinds that evolve naturally on the bottom of sandy coasts and rivers are a result of the kinematics of bed load transport. Based on the group motion of particles in the bed load within the bottom layer, a study on the nonlinear dynamics of bed load transport is presented in this paper. It is found that some development stages, such as the initiation, the equilibrium sediment transport, and the transition from a smooth bed to sand dunes, can be accounted for by different states in the nonlinear system of the bed load transport. It is verified by comparison with experimental data reported by Laboratoire Nationae D'Hydraulique, Chatou, France, that the evolution from a smooth bed to sand dunes is determined by mutation in the bed load transport. This paper presents results that may offer theoretical explanations to the experimental observations. It is also an attempt to apply the state-of-the-art nonlinear science to the classical sediment transport mechanics.

  7. Bed-levelling experiments with suspended load

    NARCIS (Netherlands)

    Talmon, A.M.; De Graaff, J.

    1991-01-01

    Bed-levelling experiments are conducted in a straight laboratory channel. The experiments involve a significant fraction of suspended sediment transport. The purpose of the experiments is to provide data for modelling of the direction of sediment transport on a transverse sloping alluvial river bed,

  8. Print a Bed Bug Card - (Single Cards)

    Science.gov (United States)

    Two sets of business-card-sized lists of tips for recognizing bed bugs and the signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

  9. Bed bugs: clinical relevance and control options.

    Science.gov (United States)

    Doggett, Stephen L; Dwyer, Dominic E; Peñas, Pablo F; Russell, Richard C

    2012-01-01

    Since the late 1990s, bed bugs of the species Cimex lectularius and Cimex hemipterus have undergone a worldwide resurgence. These bed bugs are blood-sucking insects that readily bite humans. Cutaneous reactions may occur and can start out as small macular lesions that can develop into distinctive wheals of around 5 cm in diameter, which are accompanied by intense itching. Occasionally, bullous eruptions may result. If bed bugs are numerous, the patient can present with widespread urticaria or eythematous rashes. Often, bites occur in lines along the limbs. Over 40 pathogens have been detected in bed bugs, but there is no definitive evidence that they transmit any disease-causing organisms to humans. Anemia may result when bed bugs are numerous, and their allergens can trigger asthmatic reactions. The misuse of chemicals and other technologies for controlling bed bugs has the potential to have a deleterious impact on human health, while the insect itself can be the cause of significant psychological trauma. The control of bed bugs is challenging and should encompass a multidisciplinary approach utilizing nonchemical means of control and the judicious use of insecticides. For accommodation providers, risk management procedures should be implemented to reduce the potential of bed bug infestations.

  10. Prevalence, Knowledge, and Concern About Bed Bugs.

    Science.gov (United States)

    Kaylor, Mary Beth; Wenning, Paul; Eddy, Christopher

    2015-01-01

    Recent research suggests that the resurgence of bed bugs in the U.S. has occurred at an alarming rate. Assumptions have been made that socioeconomic status is not associated with the prevalence of bed bug infestations. Little information is available at the local level, however, about the prevalence of bed bugs in private homes. The authors' pilot study aimed to identify prevalence, knowledge, and concern about bed bugs in one higher income village in Ohio utilizing survey methodology. Responses from 96 individuals who completed the Prevalence, Knowledge, and Concern About Bed Bugs survey were utilized for analysis. The majority of the sample respondents were white and 95% reported that they owned their residence. Only 6% knew someone with bed bugs. Additionally, 52% reported they were somewhat concerned about bed bugs. About 46% reported that they had changed their behavior. For a higher income area, the prevalence was dissimilar to the rate reported in the general public (about 20%). This suggests that bed bugs may be an environmental issue effecting low-income populations disproportionately. Further research is needed in areas of differing socioeconomic levels.

  11. Hipparions of the Laetolil Beds, Tanzania

    NARCIS (Netherlands)

    Hooijer, D.A.

    1979-01-01

    The Laetolil Beds in Tanzania, 20-30 miles south of Olduvai Gorge, have been extensively sampled by parties under the leadership of Mrs. Dr. Mary D. Leakey, who very kindly sent me Hipparion material collected in 1974, 1975, and 1976. In a restudy of proboscidean material from these beds described b

  12. International Standardization of Bed Rest Standard Measures

    Science.gov (United States)

    Cromwell, Ronita L.

    2010-01-01

    This slide presentation gives an overview of the standardization of bed rest measures. The International Countermeasures Working Group attempted to define and agree internationally on standard measurements for spaceflight based bed rest studies. The group identified the experts amongst several stakeholder agencys. It included information on exercise, muscle, neurological, psychological, bone and cardiovascular measures.

  13. Is inversion based high resolution characterization of spatially heterogeneous river bed hydraulic conductivity needed and possible?

    Directory of Open Access Journals (Sweden)

    W. Kurtz

    2013-05-01

    Full Text Available River-aquifer exchange fluxes influence local and regional water balances and affect groundwater and river water quality and quantity. Unfortunately, river-aquifer exchange fluxes tend to be strongly spatially variable and it is an open research question to which degree river bed heterogeneity has to be represented in a~model in order to achieve reliable estimates of river-aquifer exchange fluxes. This research question is addressed in this paper with help of synthetic simulation experiments, which mimic the Limmat aquifer in Zurich (Switzerland, where river-aquifer exchange fluxes and groundwater management activities play an important role. The solution of the unsaturated-saturated subsurface hydrological flow problem including river-aquifer interaction is calculated for ten different synthetic realities where the strongly heterogeneous river bed hydraulic conductivities (L are perfectly known. Hydraulic head data (100 in the default scenario are sampled from the synthetic realities. In subsequent data assimilation experiments, where L is unknown now, the hydraulic head data are used as conditioning information, with help of the Ensemble Kalman Filter (EnKF. For each of the ten synthetic realities, four different ensembles of L are tested in the experiments with EnKF; one ensemble estimates high resolution L-fields with different L values for each element, and the other three ensembles estimate effective L values for 5, 3 or 2 zones. The calibration of higher resolution L-fields (i.e., fully heterogeneous or 5 zones gives better results than the calibration of L for only 3 or 2 zones in terms of reproduction of states, stream-aquifer exchange fluxes and parameters. Effective L for a limited number of zones cannot always reproduce the true states and fluxes well and results in biased estimates of net exchange fluxes between aquifer and stream. Also in case only 10 head data are used for conditioning, the high resolution L-fields outperform the

  14. Determination of true bed thickness using folded bed model and borehole data

    Energy Technology Data Exchange (ETDEWEB)

    Xu, S.S.; Velasquillo-Martinez, L.G.; Grajales-Nishimura, J.M.; Murillo-Muneton, G. [Inst. Mexicano del Petroleo, Mexico City (Mexico); Garcia-Hernandez, J. [Petroleos Mexicanos Exploracion y Produccion, Tamaulipas (Mexico); Nieto-Samaniego, A.F. [Nacional Autonoma de Mexico Univ., Veracruz (Mexico). Centro de Geociencias

    2007-11-15

    The actual thickness of a given formation perpendicular to the bedding plane is known as the true bed thickness. Petroleum engineers rely on information regarding true bed thickness, particularly in dipping beds and in deviated holes because reservoir volume and isochore maps depend on these properties and not on the measured thickness. True bed thickness can be estimated from information gathered from well logs such as the dipmeter and borehole images. However, when deviations and dips exceed 10 degrees, corrections are needed. In this paper, a folded bed model was proposed to calculate the true bed thickness in the subsurface utilizing well log data. The value of true bed thickness (t) was shown to depend on the angle and the direction of the dip of the measured formation, as well as the drift angle and azimuth of the borehole. A case study from the Cantarell oil field in the southern Gulf of Mexico, offshore Campeche, was used to test the folded bed method. The model was shown to yield more uniform spatial change of the values of t, compared to the monoclinal bed model that often overestimates the average value of t. The maximum relative deviation of t from the monoclinal bed model reached 22.3 per cent and the maximum absolute deviation of t reached 34.5 m. The key factors that influence the values of t were found to be the bed dip, the dip difference between the top and base of the bed and the deviated angle of the well. The folded bed model yielded fewer changed values of the true bed thickness. 10 refs., 2 tabs., 9 figs.

  15. Designing reverse-flow packed bed reactors for stable treatment of volatile organic compounds.

    Science.gov (United States)

    Chan, Fan Liang; Keith, Jason M

    2006-02-01

    Reverse-flow packed bed reactors can be used to treat gaseous pollutants from chemical plants. This article describes the design and operation of a modified reverse-flow reactor (MRFR) which has a recuperator on each end of the reactor and a reaction zone in the middle. The recuperators have low thermal dispersion and the reaction zone has a high thermal dispersion, obtained by placing metal inserts into the bed, parallel with the gas flow. Performance of the MRFR during extended lean and rich conditions is determined with analytical analysis and compares well with numerical simulations of CO oxidation; however, the theory is expected to be useful for any reaction kinetics. A major advantage of this MRFR design is an extended time for the reactor to extinguish during lean conditions. This work also describes MRFR performance with internal reactor cooling, which can be used as a control mechanism to maintain reactor temperature for proper removal of volatile organic compounds.

  16. Flow Field of Circulating Fluidized Bed Reactor with Venturi Inlet Configuration

    Institute of Scientific and Technical Information of China (English)

    HU Jinbang; LI Yanping; CHEN Anxin

    2005-01-01

    Different two-equation k-ε models were used to simulate the gas flow field generated by a new type of circulating fluidized bed reactor with venturi gas distributor. The numerical results were compared with the experimental data. It has been shown that the simulation results from the standard k-ε model have the best match with the experimental data. Based on this model, the gas flow field in the venturi diffuser and riser was analyzed by the concept of velocity nonuniformity and dead zone percentage. Both the nonuniformity of gas velocity and the dead zone percentage reach the maximum at the venturi outlet due to the effect of the vortex. At the same time, it provides a good platform for the further optimization of the inlet configuration of circulating fluidized bed reactor.

  17. Succession and global correlation of Late Tremadoc graptolite zones from South China

    Institute of Scientific and Technical Information of China (English)

    Bernd-D.; ERDTMANN

    2009-01-01

    The Tremadocian is the first stage of the Ordovician System and is subdivided into two parts in general. The Upper Tremadocian, spanning a temporal interval of ca. 8 Ma, yields graptolite faunas crucial for biostratigraphic division and correlation in high resolution. Relatively complete successions of Upper Tremadoc graptolite zones have been proposed in Scandinavia, and North and South America. In South China, the coeval graptolite strata are widespread in deep water facies, but the successions of grapto- lite zones recognized so far are quite incomplete and thus very difficult to be correlated with those in other countries. In recent years, we have sampled bed by bed the Nanba section in the Yiyang area, Hunan Province and, below the Tetragraptus approximatus Zone, identified four Upper Tremadoc graptolite zones in descending order: the Hunnegraptus copiosus Zone, the Araneograptus murrayi Zone, the Aorograptus victoriae Zone and the Adelograptus tenellus Zone. To date, the Nanba section is the only section in China that presents a relatively complete and globally comparable succession of Upper Tremadoc graptolite zones. Therefore, this study not only confirms the existence of some Upper Tremadoc graptolite zones that were never found before in China, but also facilitates a highly resolved division and correlation for the Upper Tremadoc graptolite strata in China.

  18. Does Bedding Affect the Airway and Allergy?

    Directory of Open Access Journals (Sweden)

    J Crane

    2011-03-01

    Full Text Available Various cross-sectional and longitudinal studies have suggested that synthetic bedding is associated with asthma, allergic rhinitis and eczema while feather bedding seems to be protective. Synthetic bedding items have higher house dust mite allergen levels than feather bedding items. This is possibly the mechanism involved although fungal and bacterial proinflammatory compounds and volatile organic compounds may play a role. In this review we present and discuss the epidemiological evidence and suggest possible mechanisms. Primary intervention studies are required to show whether feather bedding is protective for the development of childhood asthma and allergic diseases while secondary intervention studies are required to potentially reduce symptoms and medication use in subjects with established disease.

  19. Incipient motion of gravel and coal beds

    Indian Academy of Sciences (India)

    Subhasish Dey; Uddaraju V Raju

    2002-10-01

    An experimental study on incipient motion of gravel and coal beds under unidirectional steady-uniform flow is presented. Experiments were carried out in a flume with various sizes of gravel and coal samples. The critical bed shear stresses for the experimental runs determined using side-wall correction show considerable disagreement with the standard curves. The characteristic parameters affecting the incipient motion of particles in rough-turbulent regime, identified based on physical reasoning and dimensional analysis, are the Shields parameter, particle Froude number, non-dimensional particle diameter and non-dimensional flow depth. Equations of critical bed shear stress for the initial movement of gravel and coal beds were obtained using experimental data. The method of application of critical bed shear stress equations is also mentioned.

  20. Air-based coal gasification in a two-chamber gas reactor with circulating fluidized bed

    Science.gov (United States)

    Dubinin, A. M.; Tuponogov, V. G.; Kagramanov, Y. A.

    2017-01-01

    During the bed gasification of solid fuels, the process temperature in the reaction zone is not high enough for reaching the maximum rate of the chemical efficiency factor of the gasification process. In order to increase the chemical efficiency factor, it is necessary to supply extra heat to the reaction zone to increase the reaction temperature. In this article, coal gasification in a chamber with forced fluidized bed is considered and it is proposed to supply extra heat with a circulating flow of an inert particulate heat transfer agent. Circulating inert particulate material is successively heated by coal combustion in a cone chamber with bubbling fluidized bed and in a combustion chamber with a spherical nozzle that inhibits the forced fluidized bed. After that, the heat transfer agent heated to 930-950°C enters first in a gasification chamber with bubbling bed and then in a chamber with forced fluidized bed, where it transfers the physical heat to the air fuel mixture. The experiments conducted with crushed Borodinsky coal and inert particulate heat transfer agent (electrocorundum) showed the temperature rise in a gasification chamber with from 760 to 870°C and the increase in the combustible component (CO) concentration in the gasification products by 5.5%. Based on the kinetic equations of the fuel combustion reactions and the CO2 reduction to CO and on the thermal balance equations of combustion and gasification chambers, the simulation model for the gas composition and the temperature rate calculated by the height of reaction chambers was developed. The experimental temperature rates and product gas compositions are in good agreement with the simulation results based on the proposed kinetic gasification model.

  1. Bed bugs: they are back! The role of the school nurse in bed bug management.

    Science.gov (United States)

    Sciscione, Patricia

    2012-09-01

    Recently there has been a resurgence of bed bugs in all facets of our society. Bed bugs have even been found in schools, causing unnecessary exclusion of students and unfounded hysteria. School nurses are again called upon to be front-line sources of information to quell the hysteria and confusion related to this unsavory condition. By arming themselves with the best evidence regarding proper identification of bed bugs and their bites and information about integrated prevention measures to control transmission of infestations, school nurses can contribute to the control and management of bed bugs and aid in the overall battle against this "new and improved" invasion of the bed bugs.

  2. Cross-bedding related anisotropy and its interplay with various boundary conditions in the formation and orientation of joints in an aeolian sandstone

    Science.gov (United States)

    Deng, Shang; Cilona, Antonino; Morrow, Carolyn; Mapeli, Cesar; Liu, Chun; Lockner, David; Prasad, Manika; Aydin, Atilla

    2015-08-01

    Previous research revealed that the cross-bedding related anisotropy in Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada, affects the orientation of compaction bands, also known as anti-cracks or closing mode structures. We hypothesize that cross-bedding should have a similar influence on the orientation of the opening mode joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the orientation of cross-beds and the orientation of different categories of joint sets including cross-bed package confined joints and joint zones in the Aztec Sandstone. The field data show that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. In comparison, the roughly N-S trending joint zones appear not to be influenced by the cross-beds in any significant way but frequently truncate against the dune boundaries. To characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples and determined an average P-wave anisotropy to be slightly larger than 13%. From these results, a model based on the generalized Hooke's law for anisotropic materials is used to analyze deformation of cross-bedded sandstone as a transversely isotropic material. In the analysis, the dip angle of cross-beds is assumed to be constant and the strike orientation varying from 0° to 359° in the east (x), north (y), and up (z) coordinate system. We find qualitative agreement between most of the model results and the observed field relations between cross-beds and the corresponding joint sets. The results also suggest that uniaxial extension (εzz > εxx = εyy = 0) and axisymmetric extension (εxx = εyy εzz) would amplify the influence of cross-bedding associated anisotropy on the joint orientation whereas a triaxial extension (εxx > εyy

  3. Innovative Bed Load Measurement System for Large Alpine Gravel-Bed Rivers

    Science.gov (United States)

    Seitz, H.; Habersack, H. M.

    2009-04-01

    The aim of the work is to figure out the bed load transport processes using direct and surrogate measurement methods for the free flowing reach of the Drau River and its most important tributary Isel River, both large Alpine gravel-bed rivers, situated in the south western part of Austria. There are some techniques for bed load measurements in natural streams; we used collecting moving particles and indirectly determining transport intensity at the study sites. Former measurements in the study reach were performed also using mobile bed load samplers and fixed bed load samplers. Individually they all are adequate bed load measurement instruments - used in combination they are complementing one another, whereas each applied separately leads to specific deficits. The investigation payed special attention on results out of the geophone installations, whereas steel plate vibrations (the plates are mounted on top of concrete structures even with the river bed surface) caused by bed load particles with a diameter larger than about 20 mm are inducing a signal into the geophones. The signal above a defined threshold voltage than is recorded in a computer system as the sum of impacts during one minute intervals. The spatio-temporal distribution of the transported bed load material, its amount and the transport processes itself could be figured out for the first time out of continuous data collection since 2006 for large alpine gravel-bed rivers. Before building up the gauging stations there were no continuous recordings of bed load transport processes in large alpine rivers over their entire cross section, hence the investigation promises a better process understanding and the possibility to determine bed load transport rates and a rough approximation of the grain size distributions of the transported bed load material under different flow conditions. A relation between detected geophone records, the flow discharge and direct bed load sampling methods (Large Helley Smith

  4. Subduction of fracture zones

    Science.gov (United States)

    Constantin Manea, Vlad; Gerya, Taras; Manea, Marina; Zhu, Guizhi; Leeman, William

    2013-04-01

    Since Wilson proposed in 1965 the existence of a new class of faults on the ocean floor, namely transform faults, the geodynamic effects and importance of fracture zone subduction is still little studied. It is known that oceanic plates are characterized by numerous fracture zones, and some of them have the potential to transport into subduction zones large volumes of water-rich serpentinite, providing a fertile water source for magma generated in subduction-related arc volcanoes. In most previous geodynamic studies, subducting plates are considered to be homogeneous, and there is no clear indication how the subduction of a fracture zone influences the melting pattern in the mantle wedge and the slab-derived fluids distribution in the subarc mantle. Here we show that subduction of serpentinized fracture zones plays a significant role in distribution of melt and fluids in the mantle wedge above the slab. Using high-resolution tree-dimensional coupled petrological-termomechanical simulations of subduction, we show that fluids, including melts and water, vary dramatically in the region where a serpentinized fracture zone enters into subduction. Our models show that substantial hydration and partial melting tend to concentrate where fracture zones are being subducted, creating favorable conditions for partially molten hydrous plumes to develop. These results are consistent with the along-arc variability in magma source compositions and processes in several regions, as the Aleutian Arc, the Cascades, the Southern Mexican Volcanic Arc, and the Andean Southern Volcanic Zone.

  5. On different regime relations between bed load transport and bed topography

    Science.gov (United States)

    Zhang, L.; Ma, H.; Fu, X.; Duan, J. G.

    2016-12-01

    Bed load transport is determined by the effective part of the total shear stress subtracting the form drag that arises from bed topography. Wang et al. (2004) quantified the overall topographic roughness of the channel bed with the parameter Sp and claimed that the increasing Sp corresponds with increasing flow resistance and decreasing bed load transport rate due to increasing form drag and decreasing skin friction. However, the flume experiments for non-uniform sediment transport on steep slope at the University of Arizona show opposite results that bed load transport increases with Sp. We investigate the physical reason of the contrasting results for the full understanding of the different regimes between bed load transport and bed topography. We develop the energy conveyance equation for water flow and bed load transport and apply it to the development of the equilibrium relation between bed load transport and energy dissipation due to the form drag. The energy theory for bed load transport shows that since our flume experiments achieved the equilibrium transport state with water and sediment circulating supplying, the bed topography Sp is determined by the flow and sediment grain size, and the bed load transport is positively related to the energy dissipation rate which is thus positively related to Sp. However, in the field experiment of Wang et al. (2004), at first, the referenced Sp is determined by the most recent significant flood whereas the bed load transport is always below the transport capacity with insufficient sediment supply. After one-time sediment feed, the bed load transport rapidly varies from ephemeral full capacity state to sediment starving state. In this process, the removal of relative fine sediment results in the rapid increment of Sp from the instant equilibrium state to the referenced Sp whereas the coarsen bed leads to decrement of bed load transport. Eventually, the sediment starving state results in the increasing Sp and decreasing

  6. Industrial-scale Fixed-bed Coal Gasification:Modeling, Simulation and Thermodynamic Analysis

    Institute of Scientific and Technical Information of China (English)

    何畅; 冯霄; 李安学; 刘永健

    2014-01-01

    We have developed a process model to simulate the behavior of an industrial-scale pressurized Lurgi fixed-bed coal gasifier using Aspen Plus and General Algebraic Modeling System (GAMS). Reaction characteristics in the fixed-bed gasifier comprising four sequential reaction zones-drying, pyrolysis, combustion and gasification are respectively modeled. A non-linear programming (NLP) model is developed for the pyrolysis zone to estimate the products composition which includes char, coal gases and distillable liquids. A four-stage model with restricted equilibrium temperature is used to study the thermodynamic equilibrium characteristics and calculate the composi-tion of syngas in the combustion and gasification zones. The thermodynamic analysis shows that the exergetic effi-ciency of the fixed-bed gasifier is mainly determined by the oxygen/coal ratio. The exergetic efficiency of the proc-ess will reach an optimum value of 78.3%when the oxygen/coal and steam/coal mass ratios are 0.14 and 0.80, re-spectively.

  7. Experimental study on the bank erosion and interaction with near-bank bed evolution due to fluvial hydraulic force

    Institute of Scientific and Technical Information of China (English)

    Ming-hui YU; Hong-yan WEI; Song-bai WU

    2015-01-01

    Bank erosion is a typical process of lateral channel migration, which is accompanied by vertical bed evolution. As a main sediment source, the failed bank soil may directly cause the increase of sediment concentration and considerable channel evolution in a short time. The paper presents an experimental study on non-cohesive and cohesive homogenous bank failure processes, influence of the failed bank soil on bank re-collapse, as well as the interaction between bank failure and near-bank bed evolution due to fluvial hydraulic force. A series of experiments were carried out in a 180° bend rectangular flume. The results reveal the iteration cycle between bank erosion and bed deformation: undercutting of the riverbank, slip failure of the submerged zone of the bank, as well as cantilever failure of the overhang, failed bank soil staying at bank toe temporarily or hydraulic transportation, exchange between the failed bank soil and bed material, bed material load being re-transported either as bed load or as suspended load, and bed deformation. Same as bank failure, the mixing of failed bank soil and bed material is more severe near the curved flow apex. Moreover, non-cohesive bank failure tends to occur near the water surface while cohesive bank failure near the bank toe. For non-cohesive dense (sandy) soil, the bank erosion amount and residual amount of failed bank soil on the bed increase with the near-bank velocity or bed erodibility. But for cohesive soil, only bank erosion amount follows the above rule. The results are expected to provide theoretical basis for river management and flood prevention.

  8. Bar morphodynamics in the tidally-influenced fluvial zone

    Science.gov (United States)

    Parsons, Daniel; Ashworth, Philip; Best, James; Nicholas, Andrew; Prokocki, Eric; Sambrook-Smith, Greg; Keevil, Claire; Sandbach, Steve

    2015-04-01

    The hydrodynamics and deposits of the Tidally-Influenced Fluvial Zone (TIFZ) are complex because it experiences competing fluvial and tidal flows and spatially and temporally variable rates of sediment transport and deposition. This paper presents a new integrated field dataset from the Columbia River Estuary, USA, that quantifies the morphodynamic response the bed morphology and bar stratigraphy to fluvial-tidal flows. A 3-year, field and modelling program that started in 2011, has been monitoring the dynamics and deposits of a 40 km-reach of the Columbia River Estuary. Data obtained so far throughout the TIFZ include: bathymetry using MBES, flow using ADCP, subsurface sedimentology using GPR and shallow coring to 5 m. Initial results from the programme suggest there is a complex spatial and temporal lag in the response of the bed morphology and deposits to the fluvial-tidal flows. Zones of strong ebb and flood flow do not necessarily produce channel beds dominated by bi-directional bedforms. Many mid-channel bars are stable over decadal time periods. This paper will illustrate the variety in bar morphologies and channel change throughout the fluvial-tidal zone and contrast these bar dynamics with examples from purely fluvial environments.

  9. Bar morphodynamics in the fluvial-tidal zone

    Science.gov (United States)

    Ashworth, P. J.; Best, J. L.; Nicholas, A.; Parsons, D. R.; Prokocki, E.; Sambrook Smith, G.; Simpson, C.

    2012-12-01

    The hydrodynamics and deposits of the Tidally-Influenced Fluvial Zone (TIFZ) are complex because it experiences competing fluvial and tidal flows, sometimes moderated by waves, and spatially and temporally variable rates of sediment transport and deposition. This paper presents a new integrated field dataset from the Columbia River Estuary, USA, that quantifies the response of the flow structure, bed morphology and bar stratigraphy to fluvial-tidal flows. A new 3-year, field and modelling program that started in 2011, has been monitoring the dynamics and deposits of a 40 km-reach of the Columbia River Estuary. Data obtained so far throughout the TIFZ include: bathymetry using MBES, flow using ADCP, subsurface sedimentology using GPR and shallow coring to 5 m. First results suggest there is a complex spatial and temporal lag in the response of the bed morphology and deposits to the fluvial-tidal flows. Zones of strong ebb and flood flow do not necessarily produce channel beds dominated by bi-directional bedforms. Many mid-channel bars are stable over decadal time periods. This paper will illustrate the variety in bar morphologies and channel change throughout the fluvial-tidal zone and contrast these bar dynamics with examples from purely fluvial environments.

  10. MEASURING THE STELLAR MASSES OF z ∼ 7 GALAXIES WITH THE SPITZER ULTRAFAINT SURVEY PROGRAM (SURFS UP)

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, R. E. Jr.; Casertano, S.; Stiavelli, M. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Gonzalez, A. H. [Department of Astronomy, University of Florida, 211 Bryant Space Science Center, Gainesville, FL 32611 (United States); Lemaux, B. C. [Aix Marseille Université, CNRS, LAM (Laboratoire d' Astrophysique de Marseille) UMR 7326, F-13388 Marseille (France); Bradač, M.; Cain, B.; Hall, N.; Huang, K.-H.; Lubin, L. [University of California, One Shields Avenue, Davis, CA 95616 (United States); Allen, S.; Von der Linden, A. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, 452 Lomita Mall, Stanford, CA 94305-4085 (United States); Gladders, M. [Department of Astronomy and Astrophysics, University of Chicago, 5640 South Ellis Avenue, Chicago, IL 60637 (United States); Hildebradt, H.; Schrabback, T. [Argelander Institute for Astronomy, University of Bonn, Auf dem Hügel 71, D-53121 Bonn (Germany); Hinz, J.; Zaritsky, D. [Steward Observatory, University of Arizona, 933 N. Cherry Avenue, Tucson, AZ 85721 (United States); Treu, T., E-mail: rryan@stsci.edu [Department of Physics, University of California, Santa Barbara, CA 93106 (United States)

    2014-05-01

    We present Spitzer/IRAC observations of nine z'-band dropouts highly magnified (2 ≲ μ ≲ 12) by the Bullet Cluster. We combine archival imaging with our Exploratory program (SURFS UP), which results in a total integration time of ∼30 hr per Infrared Array Camera (IRAC) band. We detect (≳ 3σ) in both IRAC bands the brightest of these high-redshift galaxies, with [3.6] = 23.80 ± 0.28 mag, [4.5] = 23.78 ± 0.25 mag, and (H – [3.6]) = 1.17 ± 0.32 mag. The remaining eight galaxies are undetected to [3.6] ∼ 26.4 mag and [4.5] ∼ 26.0 mag with stellar masses of ∼5 × 10{sup 7} M {sub ☉}. The detected galaxy has an estimated magnification of μ = 12 ± 4, which implies this galaxy has an ultraviolet luminosity of L{sub 1500}∼0.3 L{sub z=7}{sup ∗}—the lowest-luminosity individual source detected in IRAC at z ≳ 7. By modeling the broadband photometry, we estimate the galaxy has an intrinsic star formation rate (SFR) of SFR ∼ 1.3 M {sub ☉} yr{sup –1} and stellar mass of M ∼ 2.0 × 10{sup 9} M {sub ☉}, which gives a specific star formation rate of sSFR ∼ 0.7 Gyr{sup –1}. If this galaxy had sustained this SFR since z ∼ 20, it could have formed the observed stellar mass (to within a factor of ∼2). We also discuss alternate star formation histories and argue that the exponentially increasing model is unlikely. Finally, based on the intrinsic SFR, we estimate that this galaxy has a likely [C II] flux of (f {sub [C} {sub II]}) = 1.6 mJy.

  11. Experimental and theoretical investigation of anaerobic fluidized bed biofilm reactors

    Directory of Open Access Journals (Sweden)

    M. Fuentes

    2009-09-01

    Full Text Available This work presents an experimental and theoretical investigation of anaerobic fluidized bed reactors (AFBRs. The bioreactors are modeled as dynamic three-phase systems. Biochemical transformations are assumed to occur only in the fluidized bed zone. The biofilm process model is coupled to the system hydrodynamic model through the biofilm detachment rate; which is assumed to be a first-order function of the energy dissipation parameter and a second order function of biofilm thickness. Non-active biomass is considered to be particulate material subject to hydrolysis. The model includes the anaerobic conversion for complex substrate degradation and kinetic parameters selected from the literature. The experimental set-up consisted of two mesophilic (36±1ºC lab-scale AFBRs (R1 and R2 loaded with sand as inert support for biofilm development. The reactor start-up policy was based on gradual increments in the organic loading rate (OLR, over a four month period. Step-type disturbances were applied on the inlet (glucose and acetic acid substrate concentration (chemical oxygen demand (COD from 0.85 to 2.66 g L-1 and on the feed flow rate (from 3.2 up to 6.0 L d-1 considering the maximum efficiency as the reactor loading rate switching. The predicted and measured responses of the total and soluble COD, volatile fatty acid (VFA concentrations, biogas production rate and pH were investigated. Regarding hydrodynamic and fluidization aspects, variations of the bed expansion due to disturbances in the inlet flow rate and the biofilm growth were measured. As rate coefficients for the biofilm detachment model, empirical values of 3.73⋅10(4 and 0.75⋅10(4 s² kg-1 m-1 for R1 and R2, respectively, were estimated.

  12. PAISAJE, PATRIMONIO Y TURISMO DE SURF: FACTORES DE ATRACCIÓN Y MOTIVACIÓN EN EL «PARQUE NATURAL DEL ESTRECHO» (ESPAÑA

    Directory of Open Access Journals (Sweden)

    Manuel Rivera Mateos

    2016-01-01

    Full Text Available En este trabajo se estudia la incidencia de diversos factores geográficos, físico-ambien - tales, paisajísticos y socioculturales en la conformación y desarrollo de un destino especia - lizado en turismo deportivo de naturaleza y deportes acuáticos (win dsurf, surf, kite surf ...: Tarifa y el Parque Natural del Estrecho. Se realiza un análisis de los valores ambientales, climáticos, paisajísticos e histórico-culturales de los espacios que conforman su sistema de patrimonio territorial y que sirven de soporte y cualificación de las prácticas surferas, así como de la percepción de los mismos como factores competitivos y de atracción y sostenibi - lidad turísticas entre los agentes locales implicados en el desarrollo de estos deportes a partir de su propia experiencia y valoración.

  13. 骑浪横甩薄弱性衡准技术的发展%Development of Surf-riding Broaching Vulnerability Criteria Technology

    Institute of Scientific and Technical Information of China (English)

    唐哲

    2014-01-01

    This article introduces the physical background and the vulnerability criterion development process for the first layer and the second layer of surf-riding/broaching. Also it analyzes the preliminary criteria and the vulnerability criteria method for calculating of surf-riding/broaching. Mastering the development state of this technology can be useful for the research of relative area, and would become the base for the second general criteria technology.%介绍了骑浪/横甩的物理背景,以及骑浪/横甩第一层和第二层薄弱性衡准发展过程,并分析了骑浪横甩薄弱性衡准计算方法及初步衡准,掌握骑浪横甩薄弱性衡准技术的发展现状,有助于骑浪/横甩相关技术领域的研究,为船舶第二代完整稳性的技术发展奠定基础。

  14. SIFT和SURF在无人机影像匹配的对比研究%Comparative Study of SIFT and SURF in UAV Image Matching

    Institute of Scientific and Technical Information of China (English)

    罗亮; 熊助国

    2016-01-01

    The characteristics of the UAV image, in combination with the characteristics of SIFT and SURF operators, the two operators are com-pared in terms of feature extraction efficiency and feature extraction speed, according to the experiments on two kinds of operators in eval-uating the pros and cons of UAV image matching, the experiments show that SURF has a speed advantage, also in green vegetation cover surface can match is better than SIFT operator.%从无人机影像的特点考虑,结合SIFT和SURF算子的特点进行了两种算子在特征提取有效性、特征提取速度方面的比对,通过对两种算子在无人机影像匹配的实验中凸现的好坏做出评价,实验发现SURF的优势不仅仅在速度上,而且在绿色植被覆盖的地表下能匹配效果要优于SIFT算子。

  15. CERTS Microgrid Laboratory Test Bed

    Energy Technology Data Exchange (ETDEWEB)

    Lasseter, R. H.; Eto, J. H.; Schenkman, B.; Stevens, J.; Volkmmer, H.; Klapp, D.; Linton, E.; Hurtado, H.; Roy, J.

    2010-06-08

    CERTS Microgrid concept captures the emerging potential of distributed generation using a system approach. CERTS views generation and associated loads as a subsystem or a 'microgrid'. The sources can operate in parallel to the grid or can operate in island, providing UPS services. The system can disconnect from the utility during large events (i.e. faults, voltage collapses), but may also intentionally disconnect when the quality of power from the grid falls below certain standards. CERTS Microgrid concepts were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resynchronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults.

  16. Mix bed type desalting device

    Energy Technology Data Exchange (ETDEWEB)

    Hanaoka, Shuichi; Shiozawa, Yoshihiro; Kazama, Seiichi

    1998-12-18

    The present invention provides a condensate desalting device of a BWR type reactor capable of preventing degradation of ion exchange resins by water containing oxidative materials such as hydrogen peroxide thereby keeping reactor water at high purity. Namely, a mixed bed type desalting device comprises a desalting tower for removing impurities in water by ion exchange resins and a regeneration device for cleaning/regenerating the ion exchange resins. Means for loading iron cruds into water is disposed in the desalting tower. With such a constitution, oxidative materials such as hydrogen peroxide react with the iron cruds thereby enabling to suppress oxidative reaction during ion exchange. Since passage or cleaning/regeneration of water is conducted while loading the iron cruds between ion exchange resin particles and on the surface layer of an ion exchange resin layer by using the above-mentioned reaction, degradation of ion exchange performance of the ion exchange resins by hydrogen peroxide can be prevented upon condensate cleaning operation or resin cleaning/regeneration. As a result, degradation of quality of reactor water can be suppressed. (I.S.)

  17. Modeling nitrate removal in a denitrification bed.

    Science.gov (United States)

    Ghane, Ehsan; Fausey, Norman R; Brown, Larry C

    2015-03-15

    Denitrification beds are promoted to reduce nitrate load in agricultural subsurface drainage water to alleviate the adverse environmental effects associated with nitrate pollution of surface water. In this system, drainage water flows through a trench filled with a carbon media where nitrate is transformed into nitrogen gas under anaerobic conditions. The main objectives of this study were to model a denitrification bed treating drainage water and evaluate its adverse greenhouse gas emissions. Field experiments were conducted at an existing denitrification bed. Evaluations showed very low greenhouse gas emissions (mean N2O emission of 0.12 μg N m(-2) min(-1)) from the denitrification bed surface. Field experiments indicated that nitrate removal rate was described by Michaelis-Menten kinetics with the Michaelis-Menten constant of 7.2 mg N L(-1). We developed a novel denitrification bed model based on the governing equations for water flow and nitrate removal kinetics. The model evaluation statistics showed satisfactory prediction of bed outflow nitrate concentration during subsurface drainage flow. The model can be used to design denitrification beds with efficient nitrate removal which in turn leads to enhanced drainage water quality.

  18. Factors Associated With Infant Bed-Sharing

    Science.gov (United States)

    Heere, Megan; Moughan, Beth; Alfonsi, Joseph; Rodriguez, Jennifer; Aronoff, Stephen

    2017-01-01

    Objective: Bed-sharing is associated with sudden infant death syndrome and accidental suffocation and strangulation in bed. The purpose of this study was to identify risk factors for newborn bed-sharing. Methods: Postpartum mothers from a university maternity service were contacted by phone to complete a survey. Demographic and environmental data were collected; newborn bed-sharing and sleep environment were self-reported. Results: A total of 1261 mothers completed surveys; bed-sharing was reported by 79 mothers (6.3%). Multivariate logistic regression identified referral to a nurse (odds ratio [OR] = 10; 95% confidence interval [CI] = 4.5-30) and sleep location “other” than a crib, bassinet, or Pack and Play (OR = 7.1; 95% CI = 1.9-25.9) as factors associated with an increased risk of bed-sharing; formula feeding (OR = 0.4; 95% CI = 0.20-0.77) and crib sleeping (OR = 0.49; 95% CI = 0.26-0.86) reduced this risk. Conclusion: Infants with no identifiable places to sleep, significant health issues, and who are breastfed are more likely to bed-share. Interventional studies should be directed at these factors. PMID:28229101

  19. Heat and Mass Transfer Enforcement of Vibrating Fluidized Bed

    Institute of Scientific and Technical Information of China (English)

    ChuZhide; YangJunhong; 等

    1994-01-01

    This paper briefly introduces the development of vibrating fluidized bed at home and abroad,elaborates the vibration properties of vibrating fluidized bed.the fluidizing velocity and pressure drop of the bed layer,it also deduces the non-steady state drying dynamic equations of vibrating fluidized bed,analyzes main factors which influence the drying rate and inquires into drying rules of fixed bed and vibrating fluidized bed.

  20. 基于SURF特征与模糊推理的掌纹识别%Palmprint recognition based on SURF features and fuzzy reasoning

    Institute of Scientific and Technical Information of China (English)

    陶筱娇; 王晅

    2016-01-01

    To alleviate the limitations that the existing palmprint recognition methods are time-consuming, and their robustness to the variations of orientation, position and illumination in capturing palmprint images is insufficient, this paper describes a new palmprint recognition method based on Speeded Up Robust Features(SURF)and fuzzy reasoning. The proposed method consists of two phases: enrolling phase and identification phase. In the enrolling phase, keypoints are detected with SURF from the enrolled palmprint images and mutually matched between training samples, and then for each enrolled user, the keypoints which matching frequencies exceed 50% are selected. For each selected keypoint, the matching rate, the mean and variance of the location coordinates and the mean of SURF descriptors in the enrolled palmprint images, the maximal distance between the mean and the SURF descriptors are determined and regarded as the user's palmprint patterns stored in a pattern library. In the identification phase, it utilizes SURF to detect keypoints from the palmprint image to be identified, and then the fuzzy matching degrees for all palmprint patterns in the library are calculated. A fussy reasoning approach is developed for matching. Experimental results demonstrate that the proposed method yields a better performance in terms of the correct classification percentages compared with the recent palmprint recognition algorithms. It is also shown that the proposed approach is robust to the variations of orientation, position and illumination, and yields observably low computational cost.%针对现有掌纹识别算法对掌纹图像在采集过程中的位置、方向、亮度变化缺乏足够的鲁棒性,而且计算复杂度较高的问题,提出了一种基于SURF描述字的掌纹识别算法.算法分为训练与识别两个过程,在训练过程中,提取属于同一类所有训练样本的SURF描述字进行互配,然后计算训练样本中互配