WorldWideScience

Sample records for surf coat technol

  1. Surf Tourism, Artificial Surfing Reefs, and Environmental Sustainability

    Science.gov (United States)

    Slotkin, Michael H.; Chambliss, Karen; Vamosi, Alexander R.; Lindo, Chris

    2009-07-01

    This paper explores the confluence of surf tourism, artificial surfing reefs, and sustainability. Surfing is an ascendant recreational and tourism industry and artificial surfing reefs are a new and innovative technology and product. Presented within the context of Florida's Space Coast, empirical details on surf tourism are discussed along with the possible implications for sustainability.

  2. Surfing on the Spectrum

    Science.gov (United States)

    Apel, Laura

    2007-01-01

    Israel Paskowitz loves surfing. As a former competitive surfer, he has spent much of his life in the ocean and absorbed in a community of athletes that share a special connection with the water. Surfing is often thought of as a spiritual hobby that brings peace and relaxation to those who experience it. However, it was not until Israel's son,…

  3. Surfing on the Spectrum

    Science.gov (United States)

    Apel, Laura

    2007-01-01

    Israel Paskowitz loves surfing. As a former competitive surfer, he has spent much of his life in the ocean and absorbed in a community of athletes that share a special connection with the water. Surfing is often thought of as a spiritual hobby that brings peace and relaxation to those who experience it. However, it was not until Israel's son,…

  4. Q&A: Surfing scientist

    Science.gov (United States)

    Hoffman, Jascha

    2013-11-01

    Historian Peter Westwick and his colleague Peter Neushul thought up their scientific history of surfing, The World in the Curl (Crown, 2013), on boards off the coast of California. As the winter surfing season gets into full swing, Westwick talks about warfare, wetsuits, climate change and forecasting surf.

  5. SURF Model Calibration Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    SURF and SURFplus are high explosive reactive burn models for shock initiation and propagation of detonation waves. They are engineering models motivated by the ignition & growth concept of high spots and for SURFplus a second slow reaction for the energy release from carbon clustering. A key feature of the SURF model is that there is a partial decoupling between model parameters and detonation properties. This enables reduced sets of independent parameters to be calibrated sequentially for the initiation and propagation regimes. Here we focus on a methodology for tting the initiation parameters to Pop plot data based on 1-D simulations to compute a numerical Pop plot. In addition, the strategy for tting the remaining parameters for the propagation regime and failure diameter is discussed.

  6. Surfing the quantum world

    CERN Document Server

    Levin, Frank S

    2017-01-01

    The ideas and phenomena of the quantum world are strikingly unlike those encountered in our visual world. Surfing the Quantum World shows why and how this is so. It does this via a historical review and a gentle introduction to the fundamental principles of quantum theory, whose core concepts and symbolic representations are used to explain not only "ordinary" microscopic phenomena like the properties of the hydrogen atom and the structure of the Periodic Table of the Elements, but also a variety of mind-bending phenomena. Readers will learn that particles such as electrons and photons can behave like waves, allowing them to be in two places simultaneously, why white dwarf and neutron stars are gigantic quantum objects, how the maximum height of mountains has a quantum basis, and why quantum objects can tunnel through seemingly impenetrable barriers. Included among the various interpretational issues addressed is whether Schrodinger's cat is ever both dead and alive.

  7. Resolving Implementation Ambiguity and Improving SURF

    CERN Document Server

    Abeles, Peter

    2012-01-01

    Speeded Up Robust Features (SURF) has emerged as one of the more popular feature descriptors and detectors in recent years. Due to SURF's complexity and ambiguities found in its description, performance and algorithmic details between these implementations vary widely. To resolve these ambiguities a set of general techniques for feature stability is defined based on the smoothness rule and applied to SURF. Additional new improvements to SURF are proposed for speed and stability. To illustrate the importance of these implementation details, a performance study of popular SURF implementations is done. By utilizing all the suggested improvements it is possible to create a SURF implementation which is several times faster and/or more stable.

  8. Sand, sea and surf: segmenting South African surfers | Kruger ...

    African Journals Online (AJOL)

    Sand, sea and surf: segmenting South African surfers. ... and that they differ according to their socio-demographic characteristics, surfing behaviour and motives. The results of ... Keywords: Market segmentation; Surfing; South Africa; Typology ...

  9. Performance Analysis of Surfing: A Review.

    Science.gov (United States)

    Farley, Oliver R L; Abbiss, Chris R; Sheppard, Jeremy M

    2017-01-01

    Farley, ORL, Abbiss, CR, and Sheppard, JM. Performance Analysis of Surfing: A Review. J Strength Cond Res 31(1): 260-271, 2017-Despite the increased professionalism and substantial growth of surfing worldwide, there is limited information available to practitioners and coaches in terms of key performance analytics that are common in other field-based sports. Indeed, research analyzing surfing performance is limited to a few studies examining male surfers' heart rates, surfing activities through time-motion analysis (TMA) using video recordings and Global Positioning Satellite (GPS) data during competition and recreational surfing. These studies have indicated that specific activities undertaken during surfing are unique with a variety of activities (i.e., paddling, resting, wave riding, breath holding, and recovery of surfboard in the surf). Furthermore, environmental and wave conditions also seem to influence the physical demands of competition surfing. It is due to these demands that surfers are required to have a high cardiorespiratory fitness, high muscular endurance, and considerable strength and anaerobic power, particular within the upper torso. By exploring various methods of performance analysis used within other sports, it is possible to improve our understanding of surfing demands. In so doing this will assist in the development of protocols and strategies to assess physiological characteristics of surfers, monitor athlete performance, improve training prescription, and identify talent. Therefore, this review explores the current literature to provide insights into methodological protocols, delimitations of research into athlete analysis and an overview of surfing dynamics. Specifically, this review will describe and review the use of TMA, GPS, and other technologies (i.e., HR) that are used in external and internal load monitoring as they pertain to surfing.

  10. Mathieu Moonshine and Symmetry Surfing

    CERN Document Server

    Gaberdiel, Matthias R; Paul, Hynek

    2016-01-01

    Mathieu Moonshine, the observation that the Fourier coefficients of the elliptic genus on K3 can be interpreted as dimensions of representations of the Mathieu group M24, has been proven abstractly, but a conceptual understanding in terms of a representation of the Mathieu group on the BPS states, is missing. Some time ago, Taormina and Wendland showed that such an action can be naturally defined on the lowest non-trivial BPS states, using the idea of `symmetry surfing', i.e., by combining the symmetries of different K3 sigma models. In this paper we find non-trivial evidence that this construction can be generalized to all BPS states.

  11. Shock Detector for SURF model

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-11

    SURF and its extension SURFplus are reactive burn models aimed at shock initiation and propagation of detonation waves in high explosives. A distinctive feature of these models is that the burn rate depends on the lead shock pressure. A key part of the models is an algorithm to detect the lead shock. Typically, shock capturing hydro algorithms have small oscillations behind a shock. Here we investigate how well the shock detection algorithm works for a nearly steady propagating detonation wave in one-dimension using the Eulerian xRage code.

  12. Shock Detector for SURF model

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-11

    SURF and its extension SURFplus are reactive burn models aimed at shock initiation and propagation of detonation waves in high explosives. A distinctive feature of these models is that the burn rate depends on the lead shock pressure. A key part of the models is an algorithm to detect the lead shock. Typically, shock capturing hydro algorithms have small oscillations behind a shock. Here we investigate how well the shock detection algorithm works for a nearly steady propagating detonation wave in one-dimension using the Eulerian xRage code.

  13. Towards designing miniature surfing robots

    Science.gov (United States)

    Jafari Kang, Saeed; Vandadi, Vahid; Masoud, Hassan

    2016-11-01

    We theoretically study the surfing motion of chemically and thermally active particles located at a flat liquid-gas interface that sits above a liquid layer of finite depth. The particles' activity creates and maintains a surface tension gradient resulting in the auto-surfing. It is intuitively perceived that Marangoni surfers propel towards the direction with a higher surface tension. Remarkably, we find that the surfers may propel in the lower surface tension direction depending on their geometry and proximity to the bottom of the liquid layer. In particular, our analytical calculations for Stokes flow and diffusion-dominated scalar (i.e. chemical concentration and temperature) fields indicate that spherical particles undergo reverse Marangoni propulsion under confinement whereas disk-shaped surfers always move in the expected direction. We extend our results by proposing an approximate formula for the propulsion speed of oblate spheroidal particles based on the speeds of spheres and disks. Overall, our findings pave the way for designing microsurfers capable of operating in bounded environments.

  14. Characterization of SURF-1 expression and Surf-1p function in normal and disease conditions.

    Science.gov (United States)

    Tiranti, V; Galimberti, C; Nijtmans, L; Bovolenta, S; Perini, M P; Zeviani, M

    1999-12-01

    Loss-of-function mutations of the SURF-1 gene have been associated with Leigh syndrome with cytochrome c oxidase (COX) deficiency. Mature Surf-1 protein (Surf-1p) is a 30 kDa hydrophobic polypeptide whose function is still unknown. Using antibodies against a recombinant, hemagglutinin-tagged Surf-1p, we have demonstrated that this protein is imported into mitochondria as a larger precursor, which is then processed into the mature product by cleaving off an N-terminal leader polypeptide of approximately 40 amino acids. By using western blot analysis with specific antibodies, we showed that Surf-1p is localized in and tightly bound to the mitochondrial inner membrane. The same analysis revealed that no protein is present in cell lines harboring loss-of-function mutations of SURF-1, regardless of their type and position. Northern blot analysis showed the virtual absence of specific SURF-1 transcripts in different mutant cell lines. This result suggests that several mutations of SURF-1 are associated with severe mRNA instability. To understand better whether and which domains of the protein are essential for function, we generated several constructs with truncated or partially deleted SURF-1 cDNAs. None of these constructs, expressed into Surf-1p null mutant cells, were able to rescue the COX phenotype, suggesting that different regions of the protein are all essential for function. Finally, experiments based on blue native two-dimensional gel electrophoresis indicated that assembly of COX in Surf-1p null mutants is blocked at an early step, most likely before the incorporation of subunit II in the nascent intermediates composed of subunit I alone or subunit I plus subunit IV. However, detection of residual amounts of fully assembled complex suggests a certain degree of redundancy of this system.

  15. Experimental Investigation of Shock Wave Surfing

    CERN Document Server

    Parziale, N J; Hornung, H G; Shepherd, J E

    2010-01-01

    Shock wave surfing is investigated experimentally in GALCIT's Mach 4.0 Ludwieg Tube. Shock wave surfing occurs when a secondary free-body follows the bow shock formed by a primary free-body; an example of shock wave surfing occurs during meteorite breakup. The free-bodies in the current investigation are nylon spheres. During each run in the Ludwieg tube a high speed camera is used to capture a series of schlieren images; edge tracking software is used to measure the position of each sphere. Velocity and acceleration are had from processing the position data. The radius ratio and initial orientation of the two spheres are varied in the test matrix. The variation of sphere radius ratio and initial angle between the centers of gravity are shown to have a significant effect on the dynamics of the system.

  16. Quantitative assessment of surf-produced sea spray aerosol

    NARCIS (Netherlands)

    Neele, F.P.; De Leeuw, G.; Jansen, M.; Stive, M.J.F.

    1998-01-01

    The first results are presented from a quantitative model describing the aerosol production in the surf zone. A comparison is made with aerosol produced in the surf zone as measured during EOPACE experiments in La Jolla and Monterey. The surf aerosol production was derived from aerosol concentration

  17. Quantitative assessment of surf-produced sea spray aerosol

    NARCIS (Netherlands)

    Neele, F.P.; De Leeuw, G.; Jansen, M.; Stive, M.J.F.

    1998-01-01

    The first results are presented from a quantitative model describing the aerosol production in the surf zone. A comparison is made with aerosol produced in the surf zone as measured during EOPACE experiments in La Jolla and Monterey. The surf aerosol production was derived from aerosol concentration

  18. Women's Recreational Surfing: A Patronising Experience

    Science.gov (United States)

    Olive, Rebecca; McCuaig, Louise; Phillips, Murray G.

    2015-01-01

    Research analysing the operation of power within sport and physical activity has exposed the marginalisation and exclusion of women's sport in explicit and institutionalised ways. However, for women in recreational and alternative physical activities like surfing, sporting experiences lie outside institutionalised structures, thus requiring…

  19. An Analysis of the SURF Method

    Directory of Open Access Journals (Sweden)

    Edouard Oyallon

    2015-07-01

    Full Text Available The SURF method (Speeded Up Robust Features is a fast and robust algorithm for local, similarity invariant representation and comparison of images. Similarly to many other local descriptor-based approaches, interest points of a given image are defined as salient features from a scale-invariant representation. Such a multiple-scale analysis is provided by the convolution of the initial image with discrete kernels at several scales (box filters. The second step consists in building orientation invariant descriptors, by using local gradient statistics (intensity and orientation. The main interest of the SURF approach lies in its fast computation of operators using box filters, thus enabling real-time applications such as tracking and object recognition. The SURF framework described in this paper is based on the PhD thesis of H. Bay [ETH Zurich, 2009], and more specifically on the paper co-written by H. Bay, A. Ess, T. Tuytelaars and L. Van Gool [Computer Vision and Image Understanding, 110 (2008, pp. 346–359]. An implementation is proposed and used to illustrate the approach for image matching. A short comparison with a state-of-the-art approach is also presented, the SIFT algorithm of D. Lowe [International Journal of Computer Vision, 60 (2004, pp. 91–110], with which SURF shares a lot in common.

  20. Enhanced Approximated SURF Model For Object Recognition

    Directory of Open Access Journals (Sweden)

    S. Sangeetha

    2014-02-01

    Full Text Available Computer vision applications like camera calibration, 3D reconstruction, and object recognition and image registration are becoming widely popular now a day. In this paper an enhanced model for speeded up robust features (SURF is proposed by which the object recognition process will become three times faster than common SURF model The main idea is to use efficient data structures for both, the detector and the descriptor. The detection of interest regions is considerably speed-up by using an integral image for scale space computation. The descriptor which is based on orientation histograms is accelerated by the use of an integral orientation histogram. We present an analysis of the computational costs comparing both parts of our approach to the conventional method. Extensive experiments show a speed-up by a factor of eight while the matching and repeatability performance is decreased only slightly.

  1. Multispectral observations of the surf zone

    Science.gov (United States)

    Schoonmaker, Jon S.; Dirbas, Joseph; Gilbert, Gary

    2003-09-01

    Airborne multispectral imagery was collected over various targets on the beach and in the water in an attempt to characterize the surf zone environment with respect to electro-optical system capabilities and to assess the utility of very low cost, small multispectral systems in mine counter measures (MCM) and intelligence, surveillance and reconnaissance applications. The data was collected by PAR Government Systems Corporation (PGSC) at the Army Corps of Engineers Field Research Facility at Duck North Carolina and on the beaches of Camp Pendleton Marine Corps Base in Southern California. PGSC flew the first two of its MANTIS (Mission Adaptable Narrowband Tunable Imaging Sensor) systems. Both MANTIS systems were flown in an IR - red - green - blue (700, 600, 550, 480 nm) configuration from altitudes ranging from 200 to 700 meters. Data collected has been lightly analyzed and a surf zone index (SZI) defined and calculated. This index allows mine hunting system performance measurements in the surf zone to be normalized by environmental conditions. The SZI takes into account water clarity, wave energy, and foam persistence.

  2. Modeling and Simulation for a Surf Zone Robot

    Science.gov (United States)

    2012-12-14

    on a surf zone vehicle focused on negative buoyancy using tracked platforms that used traditional tank drive mechanisms to remain on the sea floor...through the surf zone transit and drive on to the beach. Provided by the Surf Zone Crawler Group of Naval Surface Warfare Center Panama City, a Foster...with the traction and obstacle scaling of a leg [2]. Further work elaborated this concept into an entire drivetrain concept. Focused on the

  3. Lidar and aerosol measurements over the surf zone

    NARCIS (Netherlands)

    Moerman, M.M.; Cohen, L.H.; Leeuw, G. de; Kunz, G.J.

    2001-01-01

    The aerosol produced by waves breaking in the surf zone is important for a variety of processes, such as transport of pollutants and bacteria, and electro optical propagation in the coastal zone. Yet, quantitative information on surf produced aerosol is very limited (de Leeuw et al., 2000). In the f

  4. User's Manual for Space Debris Surfaces (SD_SURF)

    Science.gov (United States)

    Elfer, N. C.

    1996-01-01

    A unique collection of computer codes, Space Debris Surfaces (SD_SURF), have been developed to assist in the design and analysis of space debris protection systems. SD_SURF calculates and summarizes a vehicle's vulnerability to space debris as a function of impact velocity and obliquity. An SD_SURF analysis will show which velocities and obliquities are the most probable to cause a penetration. This determination can help the analyst select a shield design which is best suited to the predominant penetration mechanism. The analysis also indicates the most suitable parameters for development or verification testing. The SD_SURF programs offer the option of either FORTRAN programs and Microsoft EXCEL spreadsheets and macros. The FORTRAN programs work with BUMPERII version 1.2a or 1.3 (Cosmic released). The EXCEL spreadsheets and macros can be used independently or with selected output from the SD_SURF FORTRAN programs.

  5. 76 FR 8651 - Special Local Regulation; Mavericks Surf Competition, Half Moon Bay, CA

    Science.gov (United States)

    2011-02-15

    ... SECURITY Coast Guard 33 CFR Part 100 RIN 1625-AA08 Special Local Regulation; Mavericks Surf Competition... the Mavericks Surf Competition. This special local regulation is necessary to ensure the safety of... dangers posed by the surf conditions during the Mavericks Surf Competition, the special local regulation...

  6. Effect of surfactant-coated iron oxide nanoparticles on the effluent water quality from a simulated sequencing batch reactor treating domestic wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Sangchul, E-mail: sangchul.hwang@upr.edu [Department of Civil Engineering, University of Puerto Rico, Mayaguez, PR 00681 (Puerto Rico); Martinez, Diana [Department of Civil Engineering, University of Puerto Rico, Mayaguez, PR 00681 (Puerto Rico); Perez, Priscilla [Department of Biology, University of Puerto Rico, Mayaguez, PR 00681 (Puerto Rico); Rinaldi, Carlos [Department of Chemical Engineering, University of Puerto Rico, Mayaguez, PR 00681 (Puerto Rico)

    2011-12-15

    This study was conducted to evaluate the effect of commercially available engineered iron oxide nanoparticles coated with a surfactant (ENP{sub Fe-surf}) on effluent water quality from a lab-scale sequencing batch reactor as a model secondary biological wastewater treatment. Results showed that {approx}8.7% of ENP{sub Fe-surf} applied were present in the effluent stream. The stable presence of ENP{sub Fe-surf} was confirmed by analyzing the mean particle diameter and iron concentration in the effluent. Consequently, aqueous ENP{sub Fe-surf} deteriorated the effluent water quality at a statistically significant level (p < 0.05) with respect to soluble chemical oxygen demand, turbidity, and apparent color. This implied that ENP{sub Fe-surf} would be introduced into environmental receptors through the treated effluent and could potentially impact them. - Highlights: > Surfactant-coated engineered iron oxide nanoparticles (ENP{sub Fe-surf}) were assessed. > Effluent quality was analyzed from a sequencing batch reactor with ENP{sub Fe-surf}. > {approx}8.7% of ENP{sub Fe-surf} applied was present in the effluent. > ENP{sub Fe-surf} significantly (p < 0.05) deteriorated the effluent water quality. > Stable fraction of ENP{sub Fe-surf} will be introduced into environmental receptors. - Stable presence of surfactant-coated engineered iron oxides nanoparticles deteriorated the effluent water quality at a statistically significant level (p < 0.05).

  7. Let’s Surf on The internet

    Institute of Scientific and Technical Information of China (English)

    李申禹

    1996-01-01

    在今日大学之校园内,电脑热正呈“奔腾”之势。李申禹所在的寝室购买了一台“合资”电脑,这为他们的学习另辟了一块天地,也为他们的生活着上了一点色彩,Let′s Surf on The Internet这篇习作标题潇洒,内容实在,既写出了作者漫步电脑书林的惊喜,又有对未来的展望——现在的年青人将携着the electronic books跨入新世纪。习作开首较好地运用了parllelism:结尾想象驰骋,并巧妙点题。本文Reviewed by Mr.John C.Green

  8. Palmprint Based Verification System Using SURF Features

    Science.gov (United States)

    Srinivas, Badrinath G.; Gupta, Phalguni

    This paper describes the design and development of a prototype of robust biometric system for verification. The system uses features extracted using Speeded Up Robust Features (SURF) operator of human hand. The hand image for features is acquired using a low cost scanner. The palmprint region extracted is robust to hand translation and rotation on the scanner. The system is tested on IITK database of 200 images and PolyU database of 7751 images. The system is found to be robust with respect to translation and rotation. It has FAR 0.02%, FRR 0.01% and accuracy of 99.98% and can be a suitable system for civilian applications and high-security environments.

  9. Surfing the internet with a BCI mouse

    Science.gov (United States)

    Yu, Tianyou; Li, Yuanqing; Long, Jinyi; Gu, Zhenghui

    2012-06-01

    In this paper, we present a new web browser based on a two-dimensional (2D) brain-computer interface (BCI) mouse, where our major concern is the selection of an intended target in a multi-target web page. A real-world web page may contain tens or even hundreds of targets, including hyperlinks, input elements, buttons, etc. In this case, a target filter designed in our system can be used to exclude most of those targets of no interest. Specifically, the user filters the targets of no interest out by inputting keywords with a P300-based speller, while keeps those containing the keywords. Such filtering largely facilitates the target selection task based on our BCI mouse. When there are only several targets in a web page (either an original sparse page or a target-filtered page), the user moves the mouse toward the target of interest using his/her electroencephalographic signal. The horizontal movement and vertical movement are controlled by motor imagery and P300 potential, respectively. If the mouse encounters a target of no interest, the user rejects it and continues to move the mouse. Otherwise the user selects the target and activates it. With the collaboration of the target filtering and a series of mouse movements and target selections/rejections, the user can select an intended target in a web page. Based on our browser system, common navigation functions, including history rolling forward and backward, hyperlink selection, page scrolling, text input, etc, are available. The system has been tested on seven subjects. Experimental results not only validated the efficacy of the proposed method, but also showed that free internet surfing with a BCI mouse is feasible.

  10. Sorry,officer,I was just surfing

    Institute of Scientific and Technical Information of China (English)

    英文姿

    1998-01-01

    美国被称为a nation on wheels(汽车轮子上的国家),当今计算机科学的迅猛发展与汽车车型的改进和设计的“联姻”就是一个必然。 本文对这种“联姻”的产品——network vehicle/net-mobile——的描绘具有极大的诱惑力: In a net-mobile, a motorist could tap into a regional road system not only to getdirections but also to map out a route around rush-hour traffic snags. Drivers andpassengers will be able to send and receive email, track the latest sports scores or stockquotes, surf the Web, and even play video games. 当然,除了上述“表层”的“联姻”之外.尚有其“深层”的“联姻”,如: On-board microcomputers improve fuel economy and reduce emissions. 也许有人会问:开车时一心岂能两用?不必担心: It not only offered such desktop-computer-like services as email, but allowed adriver to use them without looking away form the road. 文章还列举了不少名车,如General Motors,Toyota,BMW和Mecedes-Benz 已经研制了net-mobile的样车。其中的神奇之处有: OnStar also calls automatically for help if an accident triggers the airbag. (OnStar系统能在事故触发了保

  11. Goddard and Caldwell Oahu, Hawaii Surf Observation Dataset for 1968-2004 (NODC Accession 0001754)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surf reports are typically made several times per day at select locations around Oahu, primarily by Honolulu City and County lifeguards and the Surf News Network,...

  12. Goddard and Caldwell: Oahu, Hawaii surf observation data set for 1968 - 2004 (NODC Accession 0001754)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surf reports are typically made several times per day at select locations around Oahu, primarily by Honolulu City and County lifeguards and the Surf News Network,...

  13. Evaluation of Sift and Surf for Vision Based Localization

    Science.gov (United States)

    Qu, Xiaozhi; Soheilian, Bahman; Habets, Emmanuel; Paparoditis, Nicolas

    2016-06-01

    Vision based localization is widely investigated for the autonomous navigation and robotics. One of the basic steps of vision based localization is the extraction of interest points in images that are captured by the embedded camera. In this paper, SIFT and SURF extractors were chosen to evaluate their performance in localization. Four street view image sequences captured by a mobile mapping system, were used for the evaluation and both SIFT and SURF were tested on different image scales. Besides, the impact of the interest point distribution was also studied. We evaluated the performances from for aspects: repeatability, precision, accuracy and runtime. The local bundle adjustment method was applied to refine the pose parameters and the 3D coordinates of tie points. According to the results of our experiments, SIFT was more reliable than SURF. Apart from this, both the accuracy and the efficiency of localization can be improved if the distribution of feature points are well constrained for SIFT.

  14. Sea spray aerosol and wave energy dissipation in the surf zone

    NARCIS (Netherlands)

    Francius, M.J.; Piazzola, J.; Forget, P.; Calve, O. le; Kusmierczyk-Michulec, J.

    2007-01-01

    Results from a quantitative model for the prediction of the sea-salt mass flux produced in the surf zone are presented in this paper. The model relates the surf zone sea salt mass flux to the amount of wave energy dissipated in the surf zone. In order to apply this aerosol emission model, a wave num

  15. Searching versus surfing: how different ways of acquiring content online affect cognitive processing.

    Science.gov (United States)

    Wise, Kevin; Kim, Hyo Jung

    2008-06-01

    An experiment tested whether people orient to and encode pictures selected from a Web site differently, depending on whether the pictures were selected by searching or surfing. Participants in the search condition spent more time selecting pictures than the participants in the surf condition spent. The pictures chosen in the search condition elicited cardiac orienting, while pictures chosen in the surf condition did not. Participants recognized pictures acquired by searching more accurately than they recognized those acquired by surfing, indicating that searching led to better encoding than surfing.

  16. Collaboration on ICT in Dutch Higher Education: The SURF Approach

    Science.gov (United States)

    Boezerooy, Petra; Cordewener, Bas; Liebrand, Wim

    2007-01-01

    In "Thinking Ahead: A Vision of the Role of ICT in Education and Research in the Future, 2007-2010," the higher education institutions in the Netherlands agreed on future strategy. Under the direction of SURF, the Dutch national organization, a collaborative strategy for the application of information and communications technology (ICT)…

  17. Global concept, local practice: Taiwanese experience of CouchSurfing

    NARCIS (Netherlands)

    Chen, D.-J.

    2012-01-01

    Hospitality exchange tourism is a new type of niche tourism, which is highly dependent on the Internet. Through participating in global hospitality exchange networks, such as CouchSurfing, tourists can meet local people who are willing to offer free accommodation, and hosts can also meet people arou

  18. CoBrowser: Surfing the Web Using a Standard Browser.

    Science.gov (United States)

    Maly, K.; Zubair, M.; Li, L.

    Co-browsing is a synchronous class of collaborative applications, which allows a group of users to surf the Web together. Such an application can be deployed in an education environment in several ways. One example of where it can be used would be in courses that are project-oriented. Students would be required to collectively research or explore…

  19. Droplets move over viscoelastic substrates by surfing a ridge

    NARCIS (Netherlands)

    Karpitschka, S.A.; Das, S.; Gorcum, van M.; Perrin, H.; Andreotti, B.; Snoeijer, J.H.

    2015-01-01

    Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a

  20. Sea-spray aerosol particles generated in the surf zone

    NARCIS (Netherlands)

    Eijk, A.M.J. van; Kusmierczyk‐Michulec, J.T.; Francius, M.J.; Tedeschi, G.; Piazzola,J.; Merritt, D.L.; Fontana, J.D.

    2011-01-01

    To assess the properties of aerosol particles generated over the surf zone, two experiments were held at the pier of Scripps Institution of Oceanography (SIO), La Jolla CA, and at the pier of the U.S. Army Corps of Engineers Field Research Facility (FRF) in Duck NC. On both sites concentrations of s

  1. Observations of turbulence within a natural surf zone

    NARCIS (Netherlands)

    Ruessink, B.G.

    2010-01-01

    Here, the Reynolds stresses and , where u′, v′, and w′ are the cross-shore, alongshore, and vertical turbulence velocities, respectively, and the angle brackets represent time averaging, are used to diagnose turbulence dynamics beneath natural breaking surf-zone waves. The data were col

  2. Internet Surfing for Kindergarten Children: A Feasibility Study

    Science.gov (United States)

    Loo, Alfred

    2012-01-01

    The Internet is an effective learning tool for gifted children because it allows them to independently select the areas in which they have talent. The Internet also enables children to discover and maximize their potential. However, younger children might not have a large enough vocabulary to surf the Internet, even if they are gifted. For…

  3. Data on cytochrome c oxidase assembly in mice and human fibroblasts or tissues induced by SURF1 defect.

    Science.gov (United States)

    Kovářová, Nikola; Pecina, Petr; Nůsková, Hana; Vrbacký, Marek; Zeviani, Massimo; Mráček, Tomáš; Viscomi, Carlo; Houštěk, Josef

    2016-06-01

    This paper describes data related to a research article entitled "Tissue- and species-specific differences in cytochrome c oxidase assembly induced by SURF1 defects" [1]. This paper includes data of the quantitative analysis of individual forms of respiratory chain complexes I, III and IV present in SURF1 knockout (SURF1 (-/-) ) and control (SURF1 (+/+) ) mouse fibroblasts and tissues and in fibroblasts of human control and patients with SURF1 gene mutation. Also it includes data demonstrating response of complex IV, cytochrome c oxidase (COX), to reversible inhibition of mitochondrial translation in SURF1 (-/-) mouse and SURF1 patient fibroblast cell lines.

  4. Occurrence of larval fishes in the surf zone of a northern Gulf of Mexico barrier island

    Science.gov (United States)

    Ruple, David L.

    1984-02-01

    Larval fishes were collected from the surf zone of Horn Island, Mississippi between March 1978 and April 1979. A standardized total of 39 435 larvae were taken from 222 collections in the inner and outer surf zone regions, representing fish in 69 taxa. Overall, considerably more larvae were collected in the outer surf zone (78·3%) than in the inner surf zone (21·7%). Engraulids, Chloroscombrus chrysurus and Symphurus spp. were the most abundant larvae taken from the outer surf zone while engraulids, Leiostomus xanthurus, Brevoortia patronus and Trinectes maculatus were the numerically dominant larvae in the inner surf zone. Seasonal peaks in abundance occurred at the outer surf zone stations during May and June and at the inner surf zone stations during December. Larval densities were significantly greater in night collections than in day collections. The occurrence of early larvae, late larvae and juveniles suggests that the surf zone habitat is important to several species of coastal marine fishes. Menticirrhus littoralis, Harengula jaguana and Trachinotus carolinus appear to most readily utilize the surf zone as a nursery area.

  5. Surf zone Exchange on a Rip Channeled Beach

    Science.gov (United States)

    Reniers, A.; Macmahan, J.

    2008-12-01

    The dispersion and surf zone exchange of GPS-equipped surface drifters observed during the Rip Current EXperiment (RCEX) is examined with help of Lagrangian Coherent Structures (LCSs). LCSs allow for the detection of transport barriers in unsteady flows and are typically applied to shelf-scale circulation systems. Here LCSs are specifically computed to detect the effects of surfzone-originated Very Low Frequency motions (VLFs) with O(10) minute time scale on the cross-shore exchange of floating material using numerical model calculations of the Lagrangian surface velocity at the wave group timescale. After verification with RCEX field observations, the model is run for a range of environmental conditions experienced during the field experiment to assess the effects of VLFs on the cross-shore surf zone exchange. Results are relevant for (but not restricted to) sediment and nutrient exchange, human health, water clarity, and swimmer safety.

  6. Region Duplication Forgery Detection Technique Based on SURF and HAC

    Directory of Open Access Journals (Sweden)

    Parul Mishra

    2013-01-01

    Full Text Available Region duplication forgery detection is a special type of forgery detection approach and widely used research topic under digital image forensics. In copy move forgery, a specific area is copied and then pasted into any other region of the image. Due to the availability of sophisticated image processing tools, it becomes very hard to detect forgery with naked eyes. From the forged region of an image no visual clues are often detected. For making the tampering more robust, various transformations like scaling, rotation, illumination changes, JPEG compression, noise addition, gamma correction, and blurring are applied. So there is a need for a method which performs efficiently in the presence of all such attacks. This paper presents a detection method based on speeded up robust features (SURF and hierarchical agglomerative clustering (HAC. SURF detects the keypoints and their corresponding features. From these sets of keypoints, grouping is performed on the matched keypoints by HAC that shows copied and pasted regions.

  7. SURF IA Conflict Detection and Resolution Algorithm Evaluation

    Science.gov (United States)

    Jones, Denise R.; Chartrand, Ryan C.; Wilson, Sara R.; Commo, Sean A.; Barker, Glover D.

    2012-01-01

    The Enhanced Traffic Situational Awareness on the Airport Surface with Indications and Alerts (SURF IA) algorithm was evaluated in a fast-time batch simulation study at the National Aeronautics and Space Administration (NASA) Langley Research Center. SURF IA is designed to increase flight crew situation awareness of the runway environment and facilitate an appropriate and timely response to potential conflict situations. The purpose of the study was to evaluate the performance of the SURF IA algorithm under various runway scenarios, multiple levels of conflict detection and resolution (CD&R) system equipage, and various levels of horizontal position accuracy. This paper gives an overview of the SURF IA concept, simulation study, and results. Runway incursions are a serious aviation safety hazard. As such, the FAA is committed to reducing the severity, number, and rate of runway incursions by implementing a combination of guidance, education, outreach, training, technology, infrastructure, and risk identification and mitigation initiatives [1]. Progress has been made in reducing the number of serious incursions - from a high of 67 in Fiscal Year (FY) 2000 to 6 in FY2010. However, the rate of all incursions has risen steadily over recent years - from a rate of 12.3 incursions per million operations in FY2005 to a rate of 18.9 incursions per million operations in FY2010 [1, 2]. The National Transportation Safety Board (NTSB) also considers runway incursions to be a serious aviation safety hazard, listing runway incursion prevention as one of their most wanted transportation safety improvements [3]. The NTSB recommends that immediate warning of probable collisions/incursions be given directly to flight crews in the cockpit [4].

  8. Stern-Gerlach surfing in laser wakefield accelerators

    CERN Document Server

    Flood, Stephen P

    2015-01-01

    We investigate the effects of a Stern-Gerlach-type addition to the Lorentz force on electrons in a laser wakefield accelerator. The Stern-Gerlach-type terms are found to generate a family of trajectories describing electrons that surf along the plasma density wave driven by a laser pulse. Such trajectories could lead to an increase in the size of an electron bunch, which may have implications for attempts to exploit such bunches in future free electron lasers.

  9. Stern-Gerlach surfing in laser wakefield accelerators

    Science.gov (United States)

    Flood, Stephen P.; Burton, David A.

    2015-09-01

    We investigate the effects of a Stern-Gerlach-type addition to the Lorentz force on electrons in a laser wakefield accelerator. The Stern-Gerlach-type terms are found to generate a family of trajectories describing electrons that 'surf' along the plasma density wave driven by a laser pulse. Such trajectories could lead to an increase in the size of an electron bunch, which may have implications for attempts to exploit such bunches in future free electron lasers.

  10. Las alteraciones posturales en miembros inferiores en el surf

    OpenAIRE

    2015-01-01

    Cuando el equilibrio neuromuscular no es óptimo durante la práctica de un deporte, es posible que, a largo plazo, aparezcan trastornos posturales que, dependiendo del tiempo de entrenamiento, pueden convertirse en un obstáculo para la salud. Es por esto, que mediante esta investigación he pretendido mostrar las alteraciones posturales que el surf puede llegar a provocar en quienes lo practican. Objetivo: Analizar las alteraciones posturales en los miembros inferiores de surfist...

  11. The Vertical Structure of Shallow Water Flow in the Surf Zone and Inner Shelf

    Science.gov (United States)

    2008-01-01

    E. Richardson, 2008, Field verification of a CFD model for wave transformation and breaking in the surf zone, J. Waterw. Port Coastal Engrg., 134(2...The Vertical Structure of Shallow Water Flow in the Surf Zone and Inner Shelf Dr. Thomas C. Lippmann Center for Coastal...wave- and tidally-driven shallow water flows in the shallow depths of the inner shelf and surf zone. OBJECTIVES 1. Theoretical investigations of

  12. Tissue- and species-specific differences in cytochrome c oxidase assembly induced by SURF1 defects.

    Science.gov (United States)

    Kovářová, Nikola; Pecina, Petr; Nůsková, Hana; Vrbacký, Marek; Zeviani, Massimo; Mráček, Tomáš; Viscomi, Carlo; Houštěk, Josef

    2016-04-01

    Mitochondrial protein SURF1 is a specific assembly factor of cytochrome c oxidase (COX), but its function is poorly understood. SURF1 gene mutations cause a severe COX deficiency manifesting as the Leigh syndrome in humans, whereas in mice SURF1(-/-) knockout leads only to a mild COX defect. We used SURF1(-/-) mouse model for detailed analysis of disturbed COX assembly and COX ability to incorporate into respiratory supercomplexes (SCs) in different tissues and fibroblasts. Furthermore, we compared fibroblasts from SURF1(-/-) mouse and SURF1 patients to reveal interspecies differences in kinetics of COX biogenesis using 2D electrophoresis, immunodetection, arrest of mitochondrial proteosynthesis and pulse-chase metabolic labeling. The crucial differences observed are an accumulation of abundant COX1 assembly intermediates, low content of COX monomer and preferential recruitment of COX into I-III2-IVn SCs in SURF1 patient fibroblasts, whereas SURF1(-/-) mouse fibroblasts were characterized by low content of COX1 assembly intermediates and milder decrease in COX monomer, which appeared more stable. This pattern was even less pronounced in SURF1(-/-) mouse liver and brain. Both the control and SURF1(-/-) mice revealed only negligible formation of the I-III2-IVn SCs and marked tissue differences in the contents of COX dimer and III2-IV SCs, also less noticeable in liver and brain than in heart and muscle. Our studies support the view that COX assembly is much more dependent on SURF1 in humans than in mice. We also demonstrate markedly lower ability of mouse COX to form I-III2-IVn supercomplexes, pointing to tissue-specific and species-specific differences in COX biogenesis.

  13. Impact of the Internet surfing on reading practices and choices

    Directory of Open Access Journals (Sweden)

    Fayaz Ahmad Loan

    2012-06-01

    Full Text Available Reading in the 21st century networked society is no longer confined to the print reading. The scope of the reading has extended to the Internet sources that changed the traditional reading culture of the readers. The present study was conducted to identify the impact of the Internet surfing on reading practices and choices of the net generation college students. The survey method was applied to conduct the study and a questionnaire was used as a data collection tool. A sample of 676 students was selected from different strata based on gender, region and faculty in the degree colleges of the Kashmir region, Jammu and Kashmir state, India. In the sample size only 302 confirmed themselves as the e-readers and their responses were analyzed. Results reveal that the reading behavior of the online readers is in transition as the Internet surfing has increased non-sequential reading, interactive reading, superficial reading, and extensive reading and at the same rates is responsible for decreasing concentrated and in-depth reading. Plus, the Internet surfing has increased reading of the news & views, general knowledge, selected fields, sexual content, spiritual/religious text and has decreased reading of literature. To validate the results, the findings were correlated with earlier studies and hypotheses were formed and tested using the Chi-square test. However, the students have not experienced any electronic reading device like kindle (of Amazon or iPod (of Apple during browsing the electronic sources and it could be the future area of research.

  14. Effect of surfactant-coated iron oxide nanoparticles on the effluent water quality from a simulated sequencing batch reactor treating domestic wastewater.

    Science.gov (United States)

    Hwang, Sangchul; Martinez, Diana; Perez, Priscilla; Rinaldi, Carlos

    2011-12-01

    This study was conducted to evaluate the effect of commercially available engineered iron oxide nanoparticles coated with a surfactant (ENP(Fe-surf)) on effluent water quality from a lab-scale sequencing batch reactor as a model secondary biological wastewater treatment. Results showed that ~8.7% of ENP(Fe-surf) applied were present in the effluent stream. The stable presence of ENP(Fe-surf) was confirmed by analyzing the mean particle diameter and iron concentration in the effluent. Consequently, aqueous ENP(Fe-surf) deteriorated the effluent water quality at a statistically significant level (p < 0.05) with respect to soluble chemical oxygen demand, turbidity, and apparent color. This implied that ENP(Fe-surf) would be introduced into environmental receptors through the treated effluent and could potentially impact them.

  15. Ribosomal protein L7a is encoded by a gene (Surf-3) within the tightly clustered mouse surfeit locus.

    Science.gov (United States)

    Giallongo, A; Yon, J; Fried, M

    1989-01-01

    The mouse Surfeit locus, which contains a cluster of at least four genes (Surf-1 to Surf-4), is unusual in that adjacent genes are separated by no more than 73 base pairs (bp). The heterogeneous 5' ends of Surf-1 and Surf-2 are separated by only 15 to 73 bp, the 3' ends of Surf-1 and Surf-3 are only 70 bp apart, and the 3' ends of Surf-2 and Surf-4 overlap by 133 bp. This very tight clustering suggests a cis interaction between adjacent Surfeit genes. The Surf-3 gene (which could code for a basic polypeptide of 266 amino acids) is a highly expressed member of a pseudogene-containing multigene family. By use of an anti-peptide serum (against the C-terminal nine amino acids of the putative Surf-3 protein) for immunofluorescence and immunoblotting of mouse cell components and by in vitro translation of Surf-3 cDNA hybrid-selected mRNA, the Surf-3 gene product was identified as a 32-kilodalton ribosomal protein located in the 60S ribosomal subunit. From its subunit location, gel migration, and homology with a limited rat ribosomal peptide sequence, the Surf-3 gene was shown to encode the mouse L7a ribosomal protein. The Surf-3 gene is highly conserved through evolution and was detected by nucleic acid hybridization as existing in multiple copies (multigene families) in other mammals and as one or a few copies in birds, Xenopus, Drosophila, and Schizosaccharomyces pombe. The Surf-3 C-terminal anti-peptide serum detects a 32-kilodalton protein in other mammals, birds, and Xenopus but not in Drosophila and S. pombe. The possible effect of interaction of the Surf-3 ribosomal protein gene with adjacent genes in the Surfeit locus at the transcriptional or posttranscriptional level or both levels is discussed. Images PMID:2648130

  16. Image Retrieval Method Using Top-surf Descriptor

    CERN Document Server

    Ji, Ye

    2011-01-01

    This report presents the results and details of a content-based image retrieval project using the Top-surf descriptor. The experimental results are preliminary, however, it shows the capability of deducing objects from parts of the objects or from the objects that are similar. This paper uses a dataset consisting of 1200 images of which 800 images are equally divided into 8 categories, namely airplane, beach, motorbike, forest, elephants, horses, bus and building, while the other 400 images are randomly picked from the Internet. The best results achieved are from building category.

  17. Electron surfing acceleration in a current sheet of flares

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A model of electron acceleration in a current sheet of flares is studied by the analytical approximation solution and the test particle simulation. The electron can be trapped in a potential of propagating electrostatic wave. The trapped electron moving with the phase velocity vp of wave may be effectively accelerated by evc p× Bz force along the outflow direction in the current sheet, if a criterion condition K > 0 for electron surfing acceleration is satisfied. The electron will be accelerated continuously until the electron detrap from the wave potential at the turning point S.

  18. Cross-shore currents in the surf zone

    DEFF Research Database (Denmark)

    Aagaard, Troels; Vinther, Niels

    2008-01-01

      While the dynamics and kinematics of various types of mean cross-shore current flows in the surf zone (undertow and rip currents) are fairly well understood, the causes for transitions occurring between these two types of mean circulation patterns remain obscure. On longshore barred beaches......, such transitions involve the formation and/or degeneration of rip channels. In this paper, field evidence is presented to suggest that transitions between undertow and rip current (cell) circulations may depend upon the magnitude of the wave-induced onshore mass transport across a longshore bar, rip channel...... that both hydrodynamic conditions and existing bathymetry are critical in determining the type of mean current circulation....

  19. Bedforms and undertow in the surf zone; an analysis of the LIP 11D-data

    NARCIS (Netherlands)

    Boers, M.

    1995-01-01

    The present report gives the results of a study on bedforms and undertow in the surf zone. It is the objective of this study to get a better insight into the physical processes in the surf zone. In this study, we make use of the data obtained during the LIP llDexperiments (Arcilla et al. [1994] and

  20. Transport of larvae and detritus across the surf zone of a steep reflective pocket beach

    NARCIS (Netherlands)

    Shanks, A.L.; MacMahan, J.; Morgan, S.G.; Reniers, A.J.H.M.; Jarvis, M.; Brown, J.; Fujimura, A.; Griesemer, C.

    2015-01-01

    Larvae of many intertidal species develop offshore and must cross the surf zone to complete their onshore migration to adult habitats. Depending on hydrodynamics, the surf zone may limit this migration, especially on reflective rocky shores. As a logistically tractable analog of a rocky shore enviro

  1. Social Networking Sites' Influence on Travelers' Authentic Experience a Case Study of Couch Surfing

    Science.gov (United States)

    Liu, Xiao

    2013-01-01

    This study explored travelers' experiences in the era of network hospitality 2.0 using CouchSurfing.org as a case study. The following research questions guided this study: 1) what experience does CouchSurfing create for travelers before, during and after their travel? 2) how does couch surfers' experience relate to authenticity in context of…

  2. E-based Humanities and E-humanities on a SURF platform

    NARCIS (Netherlands)

    Kircz, J.G.

    2004-01-01

    As of 2003, SURF enables three platforms: ICT and Research, Education, and Organisation. Within these programmes, SURF has funds available to promote ICT innovations. Innovation is not an easy notion to explain. Too often we encounter new wine in old bottles and changes in vocabulary frequently cove

  3. Transport of larvae and detritus across the surf zone of a steep reflective pocket beach

    NARCIS (Netherlands)

    Shanks, A.L.; MacMahan, J.; Morgan, S.G.; Reniers, A.J.H.M.; Jarvis, M.; Brown, J.; Fujimura, A.; Griesemer, C.

    2015-01-01

    Larvae of many intertidal species develop offshore and must cross the surf zone to complete their onshore migration to adult habitats. Depending on hydrodynamics, the surf zone may limit this migration, especially on reflective rocky shores. As a logistically tractable analog of a rocky shore

  4. Learning and Identity in Overlapping Communities of Practice: Surf Club, School and Sports Clubs

    Science.gov (United States)

    Light, Richard; Nash, Melanie

    2006-01-01

    Large numbers of children and young people spend their weekends and holidays engaged in the activities of over 300 surf clubs across Australia each summer. Long term membership in these clubs, beginning from as young as five years of age, forms a significant part of children's and young people's development yet surf clubs have yet to receive…

  5. Sea spray aerosol production from waves breaking in the surf zone

    NARCIS (Netherlands)

    Leeuw, G. de

    1999-01-01

    Sea spray aerosol is a product of wave breaking. A very strong source of this aerosol is the surf zone. In this sense, measurements in the surf zone can be suitable for the assessment of the contributions of the various spray production mechanisms to the total concentrations. At present, a comprehen

  6. Information surfing with the JHU/APL coherent imager

    Science.gov (United States)

    Ratto, Christopher R.; Shipley, Kara R.; Beagley, Nathaniel; Wolfe, Kevin C.

    2015-05-01

    The ability to perform remote forensics in situ is an important application of autonomous undersea vehicles (AUVs). Forensics objectives may include remediation of mines and/or unexploded ordnance, as well as monitoring of seafloor infrastructure. At JHU/APL, digital holography is being explored for the potential application to underwater imaging and integration with an AUV. In previous work, a feature-based approach was developed for processing the holographic imagery and performing object recognition. In this work, the results of the image processing method were incorporated into a Bayesian framework for autonomous path planning referred to as information surfing. The framework was derived assuming that the location of the object of interest is known a priori, but the type of object and its pose are unknown. The path-planning algorithm adaptively modifies the trajectory of the sensing platform based on historical performance of object and pose classification. The algorithm is called information surfing because the direction of motion is governed by the local information gradient. Simulation experiments were carried out using holographic imagery collected from submerged objects. The autonomous sensing algorithm was compared to a deterministic sensing CONOPS, and demonstrated improved accuracy and faster convergence in several cases.

  7. Repensar la comunicación institucional: las diez reglas del surf / Rethinking institutional communication: the ten rules of surfing

    Directory of Open Access Journals (Sweden)

    Diego Apolo Buenaño

    2014-12-01

    Full Text Available En este ensayo se presenta un análisis desde distintas concepciones de la comunicación estratégica, en donde además de vincular aspectos centrales y tensiones que enfrentan las organizaciones en la actualidad, se ofrecen acercamientos teóricos y prácticos que contribuyan a repensar la manera que en se desarrolla la comunicación en las instituciones. En el trabajo se vincula el deporte del surf y sus reglas como eje que permite realizar comparaciones que aporten al abordaje de la comunicación desde perspectivas que buscan la confluencia entre intereses institucionales y de los actores que intervienen en el proceso mediante la investigación del entorno, el respeto a las prácticas sociales y la colaboración como base para la consecución de los objetivos conjuntos. Abstract This article presents an analysis from different conceptions of strategic communication, which in addition to linking central aspects and tensions developed by organizations today, theoretical and practical approaches are offered and contribute to rethink the way that the communication is developed in institutions. In this work the sport of surfing and its rules are vinculated as the axis that allows comparisons to contribute to addressing communication from perspectives seeking convergence between institutional interests and actors involved in the process investigating the environment, the respect to social practices and collaboration as the basis for achieving the common goals.

  8. Influence of the Surf Zone on the Marine Aerosol Concentration in a Coastal Area

    Science.gov (United States)

    Tedeschi, Gilles; van Eijk, Alexander M. J.; Piazzola, Jacques; Kusmierczyk-Michulec, Jolanta T.

    2017-01-01

    Sea-salt aerosol concentrations in the coastal zone are assessed with the numerical aerosol-transport model MACMod that applies separate aerosol source functions for open ocean and the surf zone near the sea-land transition. Numerical simulations of the aerosol concentration as a function of offshore distance from the surf zone compare favourably with experimental data obtained during a surf-zone aerosol experiment in Duck, North Carolina in autumn 2007. Based on numerical simulations, the effect of variations in aerosol production (source strength) and transport conditions (wind speed, air-sea temperature difference), we show that the surf-zone aerosols are replaced by aerosols generated over the open ocean as the airmass advects out to sea. The contribution from the surf-generated aerosol is significant during high wind speeds and high wave events, and is significant up to 30 km away from the production zone. At low wind speeds, the oceanic component dominates, except within 1-5 km of the surf zone. Similar results are obtained for onshore flow, where no further sea-salt aerosol production occurs as the airmass advects out over land. The oceanic aerosols that are well-mixed throughout the boundary layer are then more efficiently transported inland than are the surf-generated aerosols, which are confined to the first few tens of metres above the surface, and are therefore also more susceptible to the type of surface (trees or grass) that determines the deposition velocity.

  9. Surf zone diatoms: A review of the drivers, patterns and role in sandy beaches food chains

    Science.gov (United States)

    Odebrecht, Clarisse; Du Preez, Derek R.; Abreu, Paulo Cesar; Campbell, Eileen E.

    2014-10-01

    The accumulation of high biomass of diatoms in the surf zone is a characteristic feature of some sandy beaches where the wave energy is sufficiently high. A few species of diatoms, called surf diatoms, thrive in this harsh environment. The main processes driving the spatial and temporal distribution of surf diatoms as well as their standing biomass and growth were described twenty to thirty years ago based on studies conducted on the western coast of the United States of America and South African beaches. Since then, over fifty locations around the world have been reported to have surf diatom accumulations with most (three-quarters) of these being in the southern hemisphere. Their occurrence is controlled by physical and chemical factors, including wave energy, beach slope and length, water circulation patterns in the surf zone and the availability of nutrients to sustain the high biomass. The main forces driving the patterns of temporal variability of surf diatom accumulations are meteorological. In the short term (hours), the action of wind stress and wave energy controls the diatom accumulation. In the intermediate time scale (weeks to months), seasonal onshore winds of sufficient strength, as well as storm events are important. Furthermore, anthropogenic disturbances that influence the beach ecosystem as well as large-scale events, such as the El Niño Southern Oscillation, may lead to significant changes in surf diatom populations in the long term (inter-annual). Surf diatoms form the base of a short and very productive food chain in the inshore of the sandy beaches where they occur. However, the role of surf diatoms in the microbial food web is not clear and deserves further studies.

  10. Numerical modeling of surf beat generated by moving breakpoint

    Institute of Scientific and Technical Information of China (English)

    DONG GuoHai; MA XiaoZhou; TENG Bin

    2009-01-01

    As an important hydrodynamic phenomenon in the nearshore zone, the cross-shore surf beat is nu-merically studied in this paper with a fully nonlinear Boussinesq-type model, which resolves the pri-mary wave motion as well as the long waves. Compared with the classical Boussinesq equations, the equations adopted here allow for improved linear dispersion characteristics. Wave breaking and run-up in the swash zone are included in the numerical model. Mutual interactions between short waves and long waves are inherent in the model. The numerical study of long waves is based on bichromatic wave groups with a wide range of mean frequencies, group frequencies and modulation rates. The cross-shore variation in the amplitudes of short waves and long waves is investigated. The model results are compared with laboratory experiments from the literature and good agreement is found.

  11. Modelling of sediment movement in the surf and swash zones

    Institute of Scientific and Technical Information of China (English)

    TOKPOHOZIN N B; KOUNOUHEWA B; AVOSSEVOU G Y H; HOUEKPOHEHAM A; AWANOU C N

    2015-01-01

    Under the action of marine currents, non-cohesive sediments evolve by bed-load, by saltation or suspension depending on their granulometry. Several authors have considered that the movement of sediment is bidimensional and modelized the effects of swell by a constant velocitynear the seabed. Here we have studied the velocity profile of fluctuating currents near the seabed and studied the movement of sediment in 3D. The results show that in the areas of study (surf and swash) the movement of sediment occurs in a volume, and the evolution of sediment varies from an areato another. The obtained theoretical profiles of the position and velocity vectors confirm the observations of several authors.

  12. Detection of Region Duplication Forgery in Digital Images Using SURF

    Directory of Open Access Journals (Sweden)

    B L Shivakumar

    2011-07-01

    Full Text Available An Image would yield better impact in convincing someone of something rather than pure description by words. Digital images are widely used in various fields like medical imaging, journalism, scientific manipulations and digital forensics. However, images are not reliable as it may be. Digital images can be easily tampered with image editing tools. One of the major problems in image forensics is determining if a particular image is authentic or not. Digital image forensic is an emerging field of image processing area. Copy-move forgery is one type of image forgery in digital image forensic where various methods have been proposed in the field to detect the forgery. In this paper a technique is presented to detect Copy-Move Forgery based on SURF and KD-Tree for multidimensional data matching. We demonstrate our method with high resolution images affected by copy-move forgery.

  13. SurfCut: Free-Boundary Surface Extraction

    KAUST Repository

    Algarni, Marei

    2016-09-15

    We present SurfCut, an algorithm for extracting a smooth simple surface with unknown boundary from a noisy 3D image and a seed point. In contrast to existing approaches that extract smooth simple surfaces with boundary, our method requires less user input, i.e., a seed point, rather than a 3D boundary curve. Our method is built on the novel observation that certain ridge curves of a front propagated using the Fast Marching algorithm are likely to lie on the surface. Using the framework of cubical complexes, we design a novel algorithm to robustly extract such ridge curves and form the surface of interest. Our algorithm automatically cuts these ridge curves to form the surface boundary, and then extracts the surface. Experiments show the robustness of our method to errors in the data, and that we achieve higher accuracy with lower computational cost than comparable methods. © Springer International Publishing AG 2016.

  14. Numerical modeling of surf beat generated by moving breakpoint

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    As an important hydrodynamic phenomenon in the nearshore zone, the cross-shore surf beat is numerically studied in this paper with a fully nonlinear Boussinesq-type model, which resolves the primary wave motion as well as the long waves. Compared with the classical Boussinesq equations, the equations adopted here allow for improved linear dispersion characteristics. Wave breaking and run-up in the swash zone are included in the numerical model. Mutual interactions between short waves and long waves are inherent in the model. The numerical study of long waves is based on bichromatic wave groups with a wide range of mean frequencies, group frequencies and modulation rates. The cross-shore variation in the amplitudes of short waves and long waves is investigated. The model results are compared with laboratory experiments from the literature and good agreement is found.

  15. Military personnel recognition system using texture, colour, and SURF features

    Science.gov (United States)

    Irhebhude, Martins E.; Edirisinghe, Eran A.

    2014-06-01

    This paper presents an automatic, machine vision based, military personnel identification and classification system. Classification is done using a Support Vector Machine (SVM) on sets of Army, Air Force and Navy camouflage uniform personnel datasets. In the proposed system, the arm of service of personnel is recognised by the camouflage of a persons uniform, type of cap and the type of badge/logo. The detailed analysis done include; camouflage cap and plain cap differentiation using gray level co-occurrence matrix (GLCM) texture feature; classification on Army, Air Force and Navy camouflaged uniforms using GLCM texture and colour histogram bin features; plain cap badge classification into Army, Air Force and Navy using Speed Up Robust Feature (SURF). The proposed method recognised camouflage personnel arm of service on sets of data retrieved from google images and selected military websites. Correlation-based Feature Selection (CFS) was used to improve recognition and reduce dimensionality, thereby speeding the classification process. With this method success rates recorded during the analysis include 93.8% for camouflage appearance category, 100%, 90% and 100% rates of plain cap and camouflage cap categories for Army, Air Force and Navy categories, respectively. Accurate recognition was recorded using SURF for the plain cap badge category. Substantial analysis has been carried out and results prove that the proposed method can correctly classify military personnel into various arms of service. We show that the proposed method can be integrated into a face recognition system, which will recognise personnel in addition to determining the arm of service which the personnel belong. Such a system can be used to enhance the security of a military base or facility.

  16. Surfing through Hyperspace - Understanding Higher Universes in Six Easy Lessons

    Science.gov (United States)

    Pickover, Clifford A.

    2001-05-01

    Do a little armchair time-travel, rub elbows with a four-dimensional intelligent life form, or stretch your mind to the furthest corner of an uncharted universe. With this astonishing guidebook, Surfing Through Hyperspace , you need not be a mathematician or an astrophysicist to explore the all-but-unfathomable concepts of hyperspace and higher-dimensional geometry.No subject in mathematics has intrigued both children and adults as much as the idea of a fourth dimension. Philosophers and parapsychologists have meditated on this mysterious space that no one can point to but may be all around us. Yet this extra dimension has a very real, practical value to mathematicians and physicists who use it every day in their calculations. In the tradition of Flatland , and with an infectious enthusiasm, Clifford Pickover tackles the problems inherent in our 3-D brains trying to visualize a 4-D world, muses on the religious implications of the existence of higher-dimensional consciousness, and urges all curious readers to venture into "the unexplored territory lying beyond the prison of the obvious." Pickover alternates sections that explain the science of hyperspace with sections that dramatize mind-expanding concepts through a fictional dialogue between two futuristic FBI agents who dabble in the fourth dimension as a matter of national security. This highly accessible and entertaining approach turns an intimidating subject into a scientific game open to all dreamers.Surfing Through Hyperspace concludes with a number of puzzles, computer experiments and formulas for further exploration, inviting readers to extend their minds across this inexhaustibly intriguing scientific terrain.

  17. Evaluation of a 3% surf solution (surf field mastitis test) for the diagnosis of subclinical bovine and bubaline mastitis.

    Science.gov (United States)

    Muhammad, Ghulam; Naureen, Abeera; Asi, Muhammad Nadeem; Saqib, Muhammad; Fazal-ur-Rehman

    2010-03-01

    To evaluate a 3% solution of household detergent viz., Surf Excel (Surf field mastitis test, SFMT) vis-à-vis California mastitis test (CMT), Whiteside test (WST), somatic cell counts (SCC; cut off limit = 5 x 10(5) cells per millilitre) and bacteriological cultures for the detection of subclinical mastitis in quarter foremilk samples (n=800) of dairy cows and buffaloes. Culture and SCC were used as gold standards. All tests were evaluated parallel and serial patterns. The sensitivities of SFMT, SCC, culture, CMT and WST in parallel testing were 72.82, 81.55, 87.38, 75.73 and 54.37%, respectively in cows, while 66.22, 79.73, 82.43, 70.27 and 50.00, respectively in buffaloes. SFMT was significantly (pCMT in both species. In serial testing, percent specificity of SFMT (87.12 in cow; 85.16 in buffaloes) was significantly (PCMT (83.33 in cow; 80.64 in buffaloes). The negative predictive values of SFMT (93.50 in cow; 96.35 in buffaloes) differed non-significantly from that of CMT (94.02 in cow; 96.15 in buffaloes). The kappa index between the tests was moderate to perfect both in parallel (0.54 to >0.80) and serial (0.58 to >0.8) testing. On the basis of closely similar diagnostic efficiency of SFMT to CMT in terms of sensitivity, specificity, predictive values and kappa index together with inexpensive and ready availability of SFMT reagent, it tempting to suggest that SFMT can be use as a cheaper, user-friendly alternative animal-side subclinical mastitis diagnostic test in poor countries.

  18. SURF imaging beams in an aberrative medium: generation and post-processing enhancement

    CERN Document Server

    Nasholm, Sven Peter; 10.1109/TUFFC.2012.2494

    2013-01-01

    This paper presents numerical simulations of dual-frequency second-order ultrasound field (SURF) reverberation suppression transmit-pulse complexes. Such propagation was previously studied in a homogeneous medium. Here instead the propagation path includes a strongly aberrating body-wall modeled by a sequence of delay-screens. The applied SURF transmit pulse complexes each consist of a high-frequency imaging 3.5 MHz pulse combined with a low-frequency 0.5 MHz sound speed manipulation pulse. Furthermore, the feasibility of two signal post-processing methods are investigated using the aberrated transmit SURF beams. These methods are previously shown to adjust the depth of maximum SURF reverberation suppression within a homogeneous medium. The request of the study arises because imaging situations where reverberation suppression is useful are also likely to produce pulse wave-front distortion (aberration). Such distortions could potentially produce time-delays that cancel the accumulated propagation time-delay n...

  19. Analytical Derivation of Three Dimensional Vorticity Function for wave breaking in Surf Zone

    CERN Document Server

    Dutta, R

    2015-01-01

    In this report, Mathematical model for generalized nonlinear three dimensional wave breaking equations was de- veloped analytically using fully nonlinear extended Boussinesq equations to encompass rotational dynamics in wave breaking zone. The three dimensional equations for vorticity distributions are developed from Reynold based stress equations. Vorticity transport equations are also developed for wave breaking zone. This equations are basic model tools for numerical simulation of surf zone to explain wave breaking phenomena. The model reproduces most of the dynamics in the surf zone. Non linearity for wave height predictions is also shown close to the breaking both in shoaling as well as surf zone. Keyword Wave breaking, Boussinesq equation, shallow water, surf zone. PACS : 47.32-y

  20. The rate of beneficial mutations surfing on the wave of a range expansion.

    Directory of Open Access Journals (Sweden)

    Rémi Lehe

    Full Text Available Many theoretical and experimental studies suggest that range expansions can have severe consequences for the gene pool of the expanding population. Due to strongly enhanced genetic drift at the advancing frontier, neutral and weakly deleterious mutations can reach large frequencies in the newly colonized regions, as if they were surfing the front of the range expansion. These findings raise the question of how frequently beneficial mutations successfully surf at shifting range margins, thereby promoting adaptation towards a range-expansion phenotype. Here, we use individual-based simulations to study the surfing statistics of recurrent beneficial mutations on wave-like range expansions in linear habitats. We show that the rate of surfing depends on two strongly antagonistic factors, the probability of surfing given the spatial location of a novel mutation and the rate of occurrence of mutations at that location. The surfing probability strongly increases towards the tip of the wave. Novel mutations are unlikely to surf unless they enjoy a spatial head start compared to the bulk of the population. The needed head start is shown to be proportional to the inverse fitness of the mutant type, and only weakly dependent on the carrying capacity. The precise location dependence of surfing probabilities is derived from the non-extinction probability of a branching process within a moving field of growth rates. The second factor is the mutation occurrence which strongly decreases towards the tip of the wave. Thus, most successful mutations arise at an intermediate position in the front of the wave. We present an analytic theory for the tradeoff between these factors that allows to predict how frequently substitutions by beneficial mutations occur at invasion fronts. We find that small amounts of genetic drift increase the fixation rate of beneficial mutations at the advancing front, and thus could be important for adaptation during species invasions.

  1. The rate of beneficial mutations surfing on the wave of a range expansion.

    Science.gov (United States)

    Lehe, Rémi; Hallatschek, Oskar; Peliti, Luca

    2012-01-01

    Many theoretical and experimental studies suggest that range expansions can have severe consequences for the gene pool of the expanding population. Due to strongly enhanced genetic drift at the advancing frontier, neutral and weakly deleterious mutations can reach large frequencies in the newly colonized regions, as if they were surfing the front of the range expansion. These findings raise the question of how frequently beneficial mutations successfully surf at shifting range margins, thereby promoting adaptation towards a range-expansion phenotype. Here, we use individual-based simulations to study the surfing statistics of recurrent beneficial mutations on wave-like range expansions in linear habitats. We show that the rate of surfing depends on two strongly antagonistic factors, the probability of surfing given the spatial location of a novel mutation and the rate of occurrence of mutations at that location. The surfing probability strongly increases towards the tip of the wave. Novel mutations are unlikely to surf unless they enjoy a spatial head start compared to the bulk of the population. The needed head start is shown to be proportional to the inverse fitness of the mutant type, and only weakly dependent on the carrying capacity. The precise location dependence of surfing probabilities is derived from the non-extinction probability of a branching process within a moving field of growth rates. The second factor is the mutation occurrence which strongly decreases towards the tip of the wave. Thus, most successful mutations arise at an intermediate position in the front of the wave. We present an analytic theory for the tradeoff between these factors that allows to predict how frequently substitutions by beneficial mutations occur at invasion fronts. We find that small amounts of genetic drift increase the fixation rate of beneficial mutations at the advancing front, and thus could be important for adaptation during species invasions.

  2. Sandy beach surf zones: An alternative nursery habitat for 0-age Chinook salmon

    Science.gov (United States)

    Marin Jarrin, J. R.; Miller, J. A.

    2013-12-01

    The role of each habitat fish use is of great importance to the dynamics of populations. During their early marine residence, Chinook salmon (Oncorhynchus tshawytscha), an anadromous fish species, mostly inhabit estuaries but also use sandy beach surf zones and the coastal ocean. However, the role of surf zones in the early life history of Chinook salmon is unclear. We hypothesized that surf zones serve as an alternative nursery habitat, defined as a habitat that consistently provides a proportion of a population with foraging and growth rates similar to those experienced in the primary nursery. First, we confirmed that juvenile Chinook salmon cohorts are simultaneously using both habitats by combining field collections with otolith chemical and structural analysis to directly compare size and migration patterns of juveniles collected in two Oregon (USA) estuaries and surf zones during three years. We then compared juvenile catch, diet and growth in estuaries and surf zones. Juveniles were consistently caught in both habitats throughout summer. Catches were significantly higher in estuaries (average ± SD = 34.3 ± 19.7 ind. 100 m-2) than surf zones (1.0 ± 1.5 ind. 100 m-2) and were positively correlated (r = 0.92). Size at capture (103 ± 15 mm fork length, FL), size at marine entry (76 ± 13 mm FL), stomach fullness (2 ± 2% body weight) and growth rates (0.4 ± 0.0 mm day-1) were similar between habitats. Our results suggest that when large numbers of 0-age Chinook salmon inhabit estuaries, juveniles concurrently use surf zones, which serve as an alternative nursery habitat. Therefore, surf zones expand the available rearing habitat for Chinook salmon during early marine residence, a critical period in the life history.

  3. Large Eddy Simulation for Wave Breaking in the Surf Zone

    Institute of Scientific and Technical Information of China (English)

    白玉川; 蒋昌波; 沈焕庭

    2001-01-01

    In this paper, the large eddy simulation method is used combined with the marker and cell method to study the wave propagation or shoaling and breaking process. As wave propagates into shallow water, the shoaling leads to the increase of wave height, and then at a certain position, the wave will be breaking. The breaking wave is a powerful agent for generating turbulence, which plays an important role in most of the fluid dynamic processes throughout the sarf zone, such as transformation of wave energy, generation of near-shore current and diffusion of materials. So a proper numerical model for describing the turbulence effect is needed. In this paper, a revised Smagorinsky subgrid-scale model is used to describe the turbulence effect. The present study reveals that the coefficient of the Smagorinsky model for wave propagation or breaking simulation may be taken as a varying function of the water depth and distance away from the wave breaking point. The large eddy simulation model presented in this paper has been used to study the propagation of the solitary wave in constant water depth and the shoaling of the non-breaking solitary wave on a beach. The model is based on large eddy simulation, and to track free-surface movements, the Tokyo University Modified Marker and Cell (TUMMAC) method is employed. In order to ensure the accuracy of each component of this wave mathematical model,several steps have been taken to verify calculated solutions with either analytical solutions or experimental data. For non-breaking waves, very accurate results are obtained for a solitary wave propagating over a constant depth and on a beach. Application of the model to cnoidal wave breaking in the surf zone shows that the model results are in good agreement with analytical solution and experimental data. From the present model results, it can be seen that the turbulent eddy viscosity increases from the bottom to the water surface in surf zone. In the eddy viscosity curve, there is a

  4. The Relationship Between Shoreline Change and Surf Zone Sand Thickness

    Science.gov (United States)

    Miselis, J. L.; McNinch, J. E.

    2002-12-01

    There is a lack of information concerning surf zone geologic processes and their relationship to shoreline behavior despite the consensus that the two are intimately linked. Variations in sand thickness over a highly irregular migration surface close to the shoreline may influence wave dynamics and sediment transport and thus may be connected to hotspot formation. A nearshore survey, spanning 40km from north of the USACE-FRF pier in Duck, NC to just north of Oregon Inlet, was conducted using an interferometric swath bathymetry system and a chirp sub-bottom profiler. The study was conducted within 1km of the shore (in the surf zone) to investigate the processes that may be responsible for the behavior of shoreline hotspots in the area. The topmost reflector and the seafloor of the seismic profile were digitized and the depth difference between them was calculated. Though no ground truths were done in the survey area, cores collected from just north of the site suggest that the topmost reflector is a pre-modern ravinement surface (cohesive muds with layers of sand and gravel) upon which the Holocene sands migrate. An isopach map was generated and shows that the layer of sand above the first sub-bottom reflector is very thin and in some places, exposed. There are many variables that may influence hotspot behavior, including bar position and wave conditions, however, the purpose of this study is to determine if there is a spatial correlation between a thin or absent (exposed reflector) nearshore sand layer and the presence of a shoreline hotspot. In an area associated with a hotspot approximately 14km south of the USACE-FRF pier in Duck, the maximum thickness of Holocene sands was less than 2.5m. The average thickness was less than 1m (0.705m). Thicknesses that were less than 0.2m were classified as areas where the reflector was exposed and accounted for 5 percent of those calculated. It seems the thin layer of sand may represent a deficient nearshore sand source

  5. Face Recognition System based on SURF and LDA Technique

    Directory of Open Access Journals (Sweden)

    Narpat A. Singh

    2016-02-01

    Full Text Available In the past decade, Improve the quality in face recognition system is a challenge. It is a challenging problem and widely studied in the different type of imag-es to provide the best quality of faces in real life. These problems come due to illumination and pose effect due to light in gradient features. The improvement and optimization of human face recognition and detection is an important problem in the real life that can be handles to optimize the error rate, accuracy, peak signal to noise ratio, mean square error, and structural similarity Index. Now-a-days, there several methods are proposed to recognition face in different problem to optimize above parameters. There occur many invariant changes in hu-man faces due to the illumination and pose variations. In this paper we proposed a novel method in face recogni-tion to improve the quality parameters using speed up robust feature and linear discriminant analysis for opti-mize result. SURF is used for feature matching. In this paper, we use linear discriminant analysis for the edge dimensions reduction to live faces from our data-sets. The proposed method shows the better result as compare to the previous result on the basis of comparative analysis because our method show the better quality and better results in live images of face.

  6. Large herbivores surf waves of green-up during spring.

    Science.gov (United States)

    Merkle, Jerod A; Monteith, Kevin L; Aikens, Ellen O; Hayes, Matthew M; Hersey, Kent R; Middleton, Arthur D; Oates, Brendan A; Sawyer, Hall; Scurlock, Brandon M; Kauffman, Matthew J

    2016-06-29

    The green wave hypothesis (GWH) states that migrating animals should track or 'surf' high-quality forage at the leading edge of spring green-up. To index such high-quality forage, recent work proposed the instantaneous rate of green-up (IRG), i.e. rate of change in the normalized difference vegetation index over time. Despite this important advancement, no study has tested the assumption that herbivores select habitat patches at peak IRG. We evaluated this assumption using step selection functions parametrized with movement data during the green-up period from two populations each of bighorn sheep, mule deer, elk, moose and bison, totalling 463 individuals monitored 1-3 years from 2004 to 2014. Accounting for variables that typically influence habitat selection for each species, we found seven of 10 populations selected patches exhibiting high IRG-supporting the GWH. Nonetheless, large herbivores selected for the leading edge, trailing edge and crest of the IRG wave, indicating that other mechanisms (e.g. ruminant physiology) or measurement error inherent with satellite data affect selection for IRG. Our evaluation indicates that IRG is a useful tool for linking herbivore movement with plant phenology, paving the way for significant advancements in understanding how animals track resource quality that varies both spatially and temporally.

  7. Surfing through hyperspace understanding higher universes in six easy lessons

    CERN Document Server

    Pickover, Clifford A

    1999-01-01

    Do a little armchair time-travel, rub elbows with a four-dimensional intelligent life form, or stretch your mind to the furthest corner of an uncharted universe. With this astonishing guidebook, Surfing Through Hyperspace, you need not be a mathematician or an astrophysicist to explore the all-but-unfathomable concepts of hyperspace and higher-dimensional geometry. No subject in mathematics has intrigued both children and adults as much as the idea of a fourth dimension. Philosophers and parapsychologists have meditated on this mysterious space that no one can point to but may be all around us. Yet this extra dimension has a very real, practical value to mathematicians and physicists who use it every day in their calculations. In the tradtion of Flatland, and with an infectious enthusiasm, Clifford Pickover tackles the problems inherent in our 3-D brains trying to visualize a 4-D world, muses on the religious implications of the existence of higher-dimensional consciousness, and urges all curious readers to v...

  8. On the mitigation of surf-riding by adjusting center of buoyancy in design stage

    Directory of Open Access Journals (Sweden)

    Liwei Yu

    2017-05-01

    Full Text Available High-speed vessels are prone to the surf-riding in adverse quartering seas. The possibility of mitigating the surf-riding of the ITTC A2 fishing vessel in the design stage is investigated using the 6-DOF weakly non-linear model developed for surf-riding simulations in quartering seas. The longitudinal position of the ship's center of buoyancy (LCB is chosen as the design parameter. The adjusting of LCB is achieved by changing frame area curves, and hull surfaces are reconstructed accordingly using the Radial Basis Function (RBF. Surf-riding motions in regular following seas for cases with different LCBs and Froude numbers are simulated using the numerical model. Results show that the surf-riding cannot be prevented by the adjusting of LCB. However, it occurs with a higher threshold speed when ship's center of buoyancy (COB is moved towards stem compared to moving towards stern, which is mainly due to the differences on wave resistance caused by the adjusting of LCB.

  9. KARAKTERISTIK, MOTIVASI DAN NIAT WISATAWAN SURFING DI PANTAI KECAMATAN KUTA UTARA

    Directory of Open Access Journals (Sweden)

    Ni Putu Windy Pramita

    2017-04-01

    Full Text Available Black sandy beach tourist attraction of Kuta Northen region that is Batu Bolong beach and Batu Mejan beach which has potential a beautifull oncean, sunset, sunbathing and surfingthe purpose of this study was to determinethe characteristics, motivasi, and intentions rating surfing at Kuta Northen beach. The method used observation, questionnaires, interviews, literature study, and documentation. 213 respondens rating surfing with quantitative descriptive and regression linier analisys. The result obtained in this study are based on age characteristics surfing travelers will see the most travelers age between 18-29 years, male gender, country of origin Australia, and is a businessman, a master degree educational level, and marital status is not married. Surfing tourist motivation using push and pull factor with the highest scores on the social interaction. And Intention surfing tourist with the highest score there is positive world of mouth with Variabel tourist have the effect of 13,20% with a probability level of sig. 0,000, the motivation positive and significant efeect on the intention tourist but in small quantities. Therefore to improve the intention tourist come to the beach district of north kuta from the motivation pull and push should also improve the quality of beaches such as keeping the beach becomes the most importans thing that will directly make tourist feel comfortable. advice for managers is to add a lifeguard to keep the beach.

  10. Factors affecting surf zone phytoplankton production in Southeastern North Carolina, USA

    KAUST Repository

    Cahoon, Lawrence B.

    2017-07-15

    Abstract: The biomass and productivity of primary producers in the surf zone of the ocean beach at Wrightsville Beach, North Carolina, USA, were measured during all seasons, along with environmental parameters and nutrient levels. Variation in biomass (chlorophyll a) was associated with temperature. Primary production (PP), measured by in situ 14-C incubations, was a function of chlorophyll a, tide height at the start of incubations, and rainfall in the preceding 24-hr period. Biomass-normalized production (PB) was also a function of tide height and rainfall in the preceding 24-hr period. We interpreted these results as evidence of surf production 1) as combined contributions of phytoplankton and suspended benthic microalgae, which may confound application of simple P-E models to surf zone production, and 2) being regulated by nutrient source/supply fluctuations independently from other factors. Surf zone biomass and production levels are intermediate between relatively high estuarine values and much lower coastal ocean values. Surf zone production may represent an important trophic connection between these two important ecosystems.

  11. Computing OpenSURF on OpenCL and General Purpose GPU

    Directory of Open Access Journals (Sweden)

    Wanglong Yan

    2013-10-01

    Full Text Available Speeded-Up Robust Feature (SURF algorithm is widely used for image feature detecting and matching in computer vision area. Open Computing Language (OpenCL is a framework for writing programs that execute across heterogeneous platforms consisting of CPUs, GPUs, and other processors. This paper introduces how to implement an open-sourced SURF program, namely OpenSURF, on general purpose GPU by OpenCL, and discusses the optimizations in terms of the thread architectures and memory models in detail. Our final OpenCL implementation of OpenSURF is on average 37% and 64% faster than the OpenCV SURF v2.4.5 CUDA implementation on NVidia's GTX660 and GTX460SE GPUs, repectively. Our OpenCL program achieved real-time performance (>25 Frames Per Second for almost all the input images with different sizes from 320*240 to 1024*768 on NVidia's GTX660 GPU, NVidia's GTX460SE GPU and AMD's Radeon HD 6850 GPU. Our OpenCL approach on NVidia's GTX660 GPU is more than 22.8 times faster than its original CPU version on Intel's Dual-Core E5400 2.7G on average.

  12. Computing OpenSURF on OpenCL and General Purpose GPU

    Directory of Open Access Journals (Sweden)

    Wanglong Yan

    2013-10-01

    Full Text Available Speeded-Up Robust Feature (SURF algorithm is widely used for image feature detecting and matching in computer vision area. Open Computing Language (OpenCL is a framework for writing programs that execute across heterogeneous platforms consisting of CPUs, GPUs, and other processors. This paper introduces how to implement an open-sourced SURF program, namely OpenSURF, on general purpose GPU by OpenCL, and discusses the optimizations in terms of the thread architectures and memory models in detail. Our final OpenCL implementation of OpenSURF is on average 37% and 64% faster than the OpenCV SURF v2.4.5 CUDA implementation on NVidia’s GTX660 and GTX460SE GPUs, repectively. Our OpenCL program achieved real-time performance (>25 Frames Per Second for almost all the input images with different sizes from 320*240 to 1024*768 on NVidia’s GTX660 GPU, NVidia’s GTX460SE GPU and AMD’s Radeon HD 6850 GPU. Our OpenCL approach on NVidia’s GTX660 GPU is more than 22.8 times faster than its original CPU version on Intel’s Dual-Core E5400 2.7G on average.

  13. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF:Large-scale Sediment Transport Facility). Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment sus- pension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  14. Solar winds surfs waves in the Sun's atmosphere!

    Science.gov (United States)

    1999-07-01

    opposite ends after threading it through an object, like a ring. If one person wiggles the string rapidly up and down, waves form in the string that move toward the person at the other end. The ring will "surf" these waves and move toward the other person as well. Try it! "Even with this major discovery, there are questions left to answer. The observations have made it abundantly clear that heavy particles like oxygen 'surf' on the waves, and there is also mounting evidence that waves are responsible for accelerating the hydrogen atoms, the most common constituent of the solar wind. Future observations are needed to establish this fact. Many other kinds of particles, such as helium (second most common) have never been observed in the accelerating part of the corona, and new observations are also needed to refine our understanding of how the waves interact with the solar wind as a whole," said Dr. Steven Cranmer of the Harvard-Smithsonian Center for Astrophysics, lead author of the research to be published in the Astrophysical Journal*. Nevertheless, SOHO has again been able to reveal another of the Sun's mysteries: "This is another triumph for SOHO, stealing a long-held secret from our Sun", said Dr Martin Huber, Head of ESA Space Science Department and co-investigator for UVCS. *Ref. Article by S.Cranmer, G.B. Field and J.L. Kohl on Astrophysical Journal ( June 20, Vol 518, p. 937-947) available on the web at: http://www.journals.uchicago.edu/ApJ/journal/issues/ApJ/v518n2/39802/sc0.html

  15. SURF'S UP! – Protein classification by surface comparisons

    Indian Academy of Sciences (India)

    Joanna M Sasin; Adam Godzik; Janusz M Bujnicki

    2007-01-01

    Large-scale genome sequencing and structural genomics projects generate numerous sequences and structures for ‘hypothetical’ proteins without functional characterizations. Detection of homology to experimentally characterized proteins can provide functional clues, but the accuracy of homology-based predictions is limited by the paucity of tools for quantitative comparison of diverging residues responsible for the functional divergence. SURF’S UP! is a web server for analysis of functional relationships in protein families, as inferred from protein surface maps comparison according to the algorithm. It assigns a numerical score to the similarity between patterns of physicochemical features (charge, hydrophobicity) on compared protein surfaces. It allows recognizing clusters of proteins that have similar surfaces, hence presumably similar functions. The server takes as an input a set of protein coordinates and returns files with ``spherical coordinates” of proteins in a PDB format and their graphical presentation, a matrix with values of mutual similarities between the surfaces, and the unrooted tree that represents the clustering of similar surfaces, calculated by the neighbor-joining method. SURF’S UP! facilitates the comparative analysis of physicochemical features of the surface, which are the key determinants of the protein function. By concentrating on coarse surface features, SURF’S UP! can work with models obtained from comparative modelling. Although it is designed to analyse the conservation among homologs, it can also be used to compare surfaces of non-homologous proteins with different three-dimensional folds, as long as a functionally meaningful structural superposition is supplied by the user. Another valuable characteristic of our method is the lack of initial assumptions about the functional features to be compared. SURF’S UP! is freely available for academic researchers at http://asia.genesilico.pl/surfs_up/.

  16. Scaled photographs of surf over the full range of breaker sizes on the north shore of Oahu and Jaws, Maui, Hawaiian Islands (NODC Accession 0001753)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital surf photographs were scaled using surfers as height benchmarks to estimate the size of the breakers. Historical databases for surf height in Hawaii are...

  17. A Novel Image Retrieval Based on Visual Words Integration of SIFT and SURF.

    Directory of Open Access Journals (Sweden)

    Nouman Ali

    Full Text Available With the recent evolution of technology, the number of image archives has increased exponentially. In Content-Based Image Retrieval (CBIR, high-level visual information is represented in the form of low-level features. The semantic gap between the low-level features and the high-level image concepts is an open research problem. In this paper, we present a novel visual words integration of Scale Invariant Feature Transform (SIFT and Speeded-Up Robust Features (SURF. The two local features representations are selected for image retrieval because SIFT is more robust to the change in scale and rotation, while SURF is robust to changes in illumination. The visual words integration of SIFT and SURF adds the robustness of both features to image retrieval. The qualitative and quantitative comparisons conducted on Corel-1000, Corel-1500, Corel-2000, Oliva and Torralba and Ground Truth image benchmarks demonstrate the effectiveness of the proposed visual words integration.

  18. A Novel Image Retrieval Based on Visual Words Integration of SIFT and SURF.

    Science.gov (United States)

    Ali, Nouman; Bajwa, Khalid Bashir; Sablatnig, Robert; Chatzichristofis, Savvas A; Iqbal, Zeshan; Rashid, Muhammad; Habib, Hafiz Adnan

    2016-01-01

    With the recent evolution of technology, the number of image archives has increased exponentially. In Content-Based Image Retrieval (CBIR), high-level visual information is represented in the form of low-level features. The semantic gap between the low-level features and the high-level image concepts is an open research problem. In this paper, we present a novel visual words integration of Scale Invariant Feature Transform (SIFT) and Speeded-Up Robust Features (SURF). The two local features representations are selected for image retrieval because SIFT is more robust to the change in scale and rotation, while SURF is robust to changes in illumination. The visual words integration of SIFT and SURF adds the robustness of both features to image retrieval. The qualitative and quantitative comparisons conducted on Corel-1000, Corel-1500, Corel-2000, Oliva and Torralba and Ground Truth image benchmarks demonstrate the effectiveness of the proposed visual words integration.

  19. Environmental Awareness of Surf Tourists: A Case Study in the Algarve

    Directory of Open Access Journals (Sweden)

    Fabia Frank

    2015-06-01

    Full Text Available Even though surf tourism in Portugal is an economic activity with a steady growth rate, there are not many assessment studies available. Using a survey undertaken in surf camps located in the Vila do Bispo County, this study aims to analyse the environmental awareness of surf tourists in the Algarve. Through the New Environmental Paradigm (NEP scale it is shown that the environmental attitudes of respondents are strongly pro-ecological but also reveal some anthropocentric aspects. Tourists were asked about their willingness to pay for an accommodation tax earmarked for environmental protection in the Algarve. The results show that the large majority (86% would be willing to pay, which indicates a high environmental awareness. It is also found that the willingness to pay is related to the nationality, with respondents from Germany, Austria and Switzerland showing a higher willingness to pay.

  20. Loss-of-function mutations of SURF-1 are specifically associated with Leigh syndrome with cytochrome c oxidase deficiency.

    Science.gov (United States)

    Tiranti, V; Jaksch, M; Hofmann, S; Galimberti, C; Hoertnagel, K; Lulli, L; Freisinger, P; Bindoff, L; Gerbitz, K D; Comi, G P; Uziel, G; Zeviani, M; Meitinger, T

    1999-08-01

    Mutations of SURF-1, a gene located on chromosome 9q34, have recently been identified in patients affected by Leigh syndrome (LS), associated with deficiency of cytochrome c oxidase (COX), the terminal component of the mitochondrial respiratory chain. To investigate to what extent SURF-1 is responsible for human disorders because of COX deficiency, we undertook sequence analysis of the SURF-1 gene in 46 unrelated patients. We analyzed 24 COX-defective patients classified as having typical Leigh syndrome (LS(COX)), 6 patients classified as Leigh-like (LL(COX)) cases, and 16 patients classified as non-LS(COX) cases. Frameshift, stop, and splice mutations of SURF-1 were detected in 18 of 24 (75%) of the LS(COX) cases. No mutations were found in the LL(COX) and non-LS(COX) group of patients. Rescue of the COX phenotype was observed in transfected cells from patients harboring SURF-1 mutations, but not in transfected cell lines from 2 patients in whom no mutations were detected by sequence analysis. Loss of function of SURF-1 protein is specifically associated with LS(COX), although a proportion of LS(COX) cases must be the result of abnormalities in genes other than SURF-1. SURF-1 is the first nuclear gene to be consistently mutated in a major category of respiratory chain defects. DNA analysis can now be used to accurately diagnose LS(COX), a common subtype of Leigh syndrome.

  1. Heart Rate Responses of High School Students Participating in Surfing Physical Education.

    Science.gov (United States)

    Bravo, Michelle M; Cummins, Kevin M; Nessler, Jeff A; Newcomer, Sean C

    2016-06-01

    Despite the nation's rising epidemic of childhood obesity and diabetes, schools struggle to promote physical activities that help reduce risks for cardiovascular disease. Emerging data suggest that adopting novel activities into physical education (PE) curriculum may serve as an effective strategy for increasing physical activity in children. The purpose of this investigation was to characterize activity in the water and heart rates (HRs) of high school students participating in surf PE courses. Twenty-four male (n = 20) and female (n = 4) high school students (mean age = 16.7 ± 1.0 years) who were enrolled in surf PE courses at 2 high schools participated in this investigation. Daily measurements of surfing durations, average HR, and maximum HR were made on the students with HR monitors (PolarFT1) over an 8-week period. In addition, HR and activity in the water was evaluated during a single session in a subset of students (n = 11) using a HR monitor (PolarRCX5) and a video camera (Canon HD). Activity and HR were synchronized and evaluated in 5-second intervals during data analyses. The average duration that PE students participated in surfing during class was 61.7 ± 1.0 minutes. Stationary, paddling, wave riding, and miscellaneous activities comprised 42.7 ± 9.5, 36.7 ± 7.9, 2.9 ± 1.4, and 17.8 ± 11.4 percent of the surf session, respectively. The average and maximum HRs during these activities were 131.1 ± 0.9 and 177.2 ± 1.0 b·min, respectively. These data suggest that high school students participating in surf PE attained HRs and durations that are consistent with recommendations with cardiovascular fitness and health. In the future, PE programs should consider incorporating other action sports into their curriculum to enhance cardiovascular health.

  2. Run-up of tsunamis and long waves in terms of surf-similarity

    DEFF Research Database (Denmark)

    Madsen, Per A.; Fuhrman, David R.

    2008-01-01

    of the surf-similarity parameter and the amplitude to depth ratio determined at some offshore location. We use the analytical expressions to analyze the impact of tsunamis on beaches and relate the discussion to the recent Indian Ocean tsunami from December 26, 2004. An important conclusion is that extreme...... run-up combined with extreme flow velocities occurs for surf-similarity parameters of the order 3-6, and for typical tsunami wave periods this requires relatively mild beach slopes. Next, we compare the theoretical solutions to measured run-up of breaking and non-breaking irregular waves on steep...

  3. SURF: Taking Sustainable Remediation from Concept to Standard Operating Procedure (Invited)

    Science.gov (United States)

    Smith, L. M.; Wice, R. B.; Torrens, J.

    2013-12-01

    Over the last decade, many sectors of industrialized society have been rethinking behavior and re-engineering practices to reduce consumption of energy and natural resources. During this time, green and sustainable remediation (GSR) has evolved from conceptual discussions to standard operating procedure for many environmental remediation practitioners. Government agencies and private sector entities have incorporated GSR metrics into their performance criteria and contracting documents. One of the early think tanks for the development of GSR was the Sustainable Remediation Forum (SURF). SURF brings together representatives of government, industry, consultancy, and academia to parse the means and ends of incorporating societal and economic considerations into environmental cleanup projects. Faced with decades-old treatment programs with high energy outputs and no endpoints in sight, a small group of individuals published the institutional knowledge gathered in two years of ad hoc meetings into a 2009 White Paper on sustainable remediation drivers, practices, objectives, and case studies. Since then, SURF has expanded on those introductory topics, publishing its Framework for Integrating Sustainability into Remediation Projects, Guidance for Performing Footprint Analyses and Life-Cycle Assessments for the Remediation Industry, a compendium of metrics, and a call to improve the integration of land remediation and reuse. SURF's research and members have also been instrumental in the development of additional guidance through ASTM International and the Interstate Technology and Regulatory Council. SURF's current efforts focus on water reuse, the international perspective on GSR (continuing the conversations that were the basis of SURF's December 2012 meeting at the National Academy of Sciences in Washington, DC), and ways to capture and evaluate the societal benefits of site remediation. SURF also promotes and supports student chapters at universities across the US

  4. Microbial fuel cell as new technol

    Directory of Open Access Journals (Sweden)

    Mostafa Rahimnejad

    2015-09-01

    Full Text Available Recently, great attentions have been paid to microbial fuel cells (MFCs due to their mild operating conditions and using variety of biodegradable substrates as fuel. The traditional MFC consisted of anode and cathode compartments but there are single chamber MFCs. Microorganisms actively catabolize substrate, and bioelectricities are generated. MFCs could be utilized as power generator in small devices such as biosensor. Besides the advantages of this technology, it still faces practical barriers such as low power and current density. In the present article different parts of MFC such as anode, cathode and membrane have been reviewed and to overcome the practical challenges in this field some practical options have been suggested. Also, this research review demonstrates the improvement of MFCs with summarization of their advantageous and possible applications in future application. Also, Different key factors affecting bioelectricity generation on MFCs were investigated and these key parameters are fully discussed.

  5. The Ocean as a Unique Therapeutic Environment: Developing a Surfing Program

    Science.gov (United States)

    Clapham, Emily D.; Armitano, Cortney N.; Lamont, Linda S.; Audette, Jennifer G.

    2014-01-01

    Educational aquatic programming offers necessary physical activity opportunities to children with disabilities and the benefits of aquatic activities are more pronounced for children with disabilities than for their able-bodied peers. Similar benefits could potentially be derived from surfing in the ocean. This article describes an adapted surfing…

  6. Modelling Vertical Variation of Turbulent Flow Across a Surf Zone Using SWASH

    NARCIS (Netherlands)

    Zijlema, M.

    2014-01-01

    This paper presents the application of the open source non-hydrostatic wave-flow model SWASH to propagation of irregular waves in a barred surf zone, and the model results are discussed by comparing against an extensive laboratory data set. This study focus not only on wave transformation in the sur

  7. Post-Processing Enhancement of Reverberation-Noise Suppression in Dual-Frequency SURF Imaging

    CERN Document Server

    Nasholm, Sven Peter; Angelsen, Bjørn A J; 10.1109/TUFFC.2011.1811

    2013-01-01

    A post-processing adjustment technique which aims for enhancement of dual-frequency SURF (Second order UltRasound Field) reverberation-noise suppression imaging in medical ultrasound is analyzed. Two variant methods are investigated through numerical simulations. They both solely involve post-processing of the propagated high-frequency (HF) imaging wave fields, which in real-time imaging corresponds to post-processing of the beamformed receive radio-frequency signals. Hence the transmit pulse complexes are the same as for the previously published SURF reverberation-suppression imaging method. The adjustment technique is tested on simulated data from propagation of SURF pulse complexes consisting of a 3.5 MHz HF imaging pulse added to a 0.5 low-frequency sound-speed manipulation pulse. Imaging transmit beams are constructed with and without adjustment. The post-processing involves filtering, e.g., by a time-shift, in order to equalize the two SURF HF pulses at a chosen depth. This depth is typically chosen to ...

  8. The Ocean as a Unique Therapeutic Environment: Developing a Surfing Program

    Science.gov (United States)

    Clapham, Emily D.; Armitano, Cortney N.; Lamont, Linda S.; Audette, Jennifer G.

    2014-01-01

    Educational aquatic programming offers necessary physical activity opportunities to children with disabilities and the benefits of aquatic activities are more pronounced for children with disabilities than for their able-bodied peers. Similar benefits could potentially be derived from surfing in the ocean. This article describes an adapted surfing…

  9. Implementing CHC to Counter Shoulder Surfing Attack in PassPoint – Style Graphical Passwords

    Directory of Open Access Journals (Sweden)

    M. Joshuva

    2011-05-01

    Full Text Available Graphical passwords are an alternative to existing alphanumeric passwords. In Graphical passwords users click on images than type a long, complex password. Passpoints scheme is one of the Graphical user authentication techniques. In this method the password is represented by multiple clicks on a single image. One of the advantages with Passpoints scheme is that, a user can click on any place in the image as a click point. Graphical authentication suffers a major drawback of Shoulder-surfing. Shoulder-surfing refers to someone observing the user’s action as the user enters a password. Due to this, the user’s action can be monitored by the attacker or it can be captured using recording devices such as camera. Sobrado and Birget suggested Convex Hull Click (CHC scheme to counter shoulder-surfing using PassIcons which is different from PassPoint scheme. In this paper, we described how CHC is implemented in Passpoint-sheme to counter Shoulder Surfing Attack.

  10. Performance differences between sexes in the pop-up phase of surfing.

    Science.gov (United States)

    Eurich, Alea D; Brown, Lee E; Coburn, Jared W; Noffal, Guillermo J; Nguyen, Diamond; Khamoui, Andy V; Uribe, Brandon P

    2010-10-01

    Surfing is a dynamic sport that is multidirectional in nature and requires peak performance in variable ocean conditions. Its growing popularity among the female population has stirred curiosity as to whether women can and will 1 day face their male counterparts in head-to-head competition at the top levels. The purpose of this study was to examine male and female differences in performance of a simulated surfing pop-up movement. Forty recreationally trained surfers (20 men and 20 women) were instructed to lie prone on a force plate, in the pop-up position (similar to a push-up), with only their hands in contact with the plate. A velocity transducer was attached to their back via an adjustable strap around their upper trunk. They completed 3 pop-ups as explosively as possible by pushing forcefully with their hands and jumping to their feet. Absolute and relative force and power were measured. Results demonstrated that men exhibited significantly (p pop-up movement. It appears that women may be at a disadvantage in regards to peak performance when compared to their male counterparts in the surfing pop-up movement. Therefore, women should train for both maximum and explosive upper-body strength in addition to their time spent surfing.

  11. Robust Object-Based Watermarking Using SURF Feature Matching and DFT Domain

    Directory of Open Access Journals (Sweden)

    M. Cedillo-Hernandez

    2013-12-01

    Full Text Available In this paper we propose a robust object-based watermarking method, in which the watermark is embedded into the middle frequencies band of the Discrete Fourier Transform (DFT magnitude of the selected object region, altogether with the Speeded Up Robust Feature (SURF algorithm to allow the correct watermark detection, even if the watermarked image has been distorted. To recognize the selected object region after geometric distortions, during the embedding process the SURF features are estimated and stored in advance to be used during the detection process. In the detection stage, the SURF features of the distorted image are estimated and match them with the stored ones. From the matching result, SURF features are used to compute the Affine-transformation parameters and the object region is recovered. The quality of the watermarked image is measured using the Peak Signal to Noise Ratio (PSNR, Structural Similarity Index (SSIM and the Visual Information Fidelity (VIF. The experimental results show the proposed method provides robustness against several geometric distortions, signal processing operations and combined distortions. The receiver operating characteristics (ROC curves also show the desirable detection performance of the proposed method. The comparison with a previously reported methods based on different techniques is also provided.

  12. Baseline Measurements of Shoulder Surfing Analysis and Comparability for Smartphone Unlock Authentication

    Science.gov (United States)

    2017-05-22

    lines, and graphical patterns without lines) in a controlled setting . These videos are designed to simulate shoulder surfing settings under varied attack...than triple the success rate with a single view at 72.44 . The goal of this research is to identify more effective guidance for mobile device users to

  13. Constitutive knockout of Surf1 is associated with high embryonic lethality, mitochondrial disease and cytochrome c oxidase deficiency in mice.

    Science.gov (United States)

    Agostino, Alessandro; Invernizzi, Federica; Tiveron, Cecilia; Fagiolari, Gigliola; Prelle, Alessandro; Lamantea, Eleonora; Giavazzi, Alessio; Battaglia, Giorgio; Tatangelo, Laura; Tiranti, Valeria; Zeviani, Massimo

    2003-02-15

    We report here the creation of a constitutive knockout mouse for SURF1, a gene encoding one of the assembly proteins involved in the formation of cytochrome c oxidase (COX). Loss-of-function mutations of SURF1 cause Leigh syndrome associated with an isolated and generalized COX deficiency in humans. The murine phenotype is characterized by the following hallmarks: (1) high post-implantation embryonic lethality, affecting approximately 90% of the Surf1(-/-) individuals; (2) early-onset mortality of post-natal individuals; (3) highly significant deficit in muscle strength and motor performance; (4) profound and isolated defect of COX activity in skeletal muscle and liver, and, to a lesser extent, heart and brain; (5) morphological abnormalities of skeletal muscle, characterized by reduced histochemical reaction to COX and mitochondrial proliferation; (6) no obvious abnormalities in brain morphology, reflecting the virtual absence of overt neurological symptoms. These results indicate a function for murine Surf1 protein (Surf1p) specifically related to COX and recapitulate, at least in part, the human phenotype. This is the first mammalian model for a nuclear disease gene of a human mitochondrial disorder. Our model constitutes a useful tool to investigate the function of Surf1p, help understand the pathogenesis of Surf1p deficiency in vivo, and evaluate the efficacy of treatment.

  14. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-10-01

    Full Text Available Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF: Large-scale Sediment Transport Facility. Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment suspension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  15. Assessments Of Different Speeded Up Robust Features (SURF Algorithm Resolution For Pose Estimation Of UAV

    Directory of Open Access Journals (Sweden)

    Bassem Sheta

    2012-11-01

    Full Text Available The UAV industry is growing rapidly in an attempt to serve both military and commercial applications. A crucial aspect in the development of UAVs is the reduction of navigational sensor costs while maintaining accurate navigation. Advances in visual sensor solutions with traditional navigation sensors are proving to be significantly promising in replacing traditional IMU or GPS systems for many mission scenarios. The basic concept behind Vision Based Navigation (VBN is to find the matches between a set of features in real-time captured images taken by the imaging sensor on the UAV and database images. A scale and rotation invariant image matching algorithm is a key element for VBN of aerial vehicles. Matches between the geo-referenced database images and the new real-time captured ones are determined by employing the fast Speeded Up Robust Features (SURF algorithm. The SURF algorithm consists mainly of two steps: the first is the detection of points of interest and the second is the creation of descriptors for each of these points. In this research paper, two major factors are investigated and tested to efficiently create the descriptors for each point of interest. The first factor is the dimension of the descriptor for a given point of interest. The dimension is affected by the number of descriptor sub-regions which consequently affects the matching time and the accuracy. SURF performance has been investigated and tested using different dimensions of the descriptor. The second factor is the number of sample points in each sub-region which are used to build the descriptor of the point of interest. SURF performance has been investigated and tested by changing thenumber of sample points in each sub-region where the matching accuracy is affected. Assessments of the SURF performance and consequently on UAV VBN are investigated.

  16. "Do outside": corpo e natureza, medo e gênero no surfe universitário paulistano "From the outside": body and nature, fear and gender in surfing

    Directory of Open Access Journals (Sweden)

    Marília Martins Bandeira

    2011-03-01

    Full Text Available Ao objetivo primeiro desta pesquisa, descrever as dinâmicas do surfe e os significados de sua prática, em especial a relação ser humano/natureza estabelecida por meio do esporte, somaram-se outros objetivos: problematizar a aproximação do pesquisador de seu campo de investigação, a possibilidade de um pesquisador realizar uma investigação através de seu próprio corpo e discutir a questão de gênero no surfe. Sobre o objetivo primeiro desta pesquisa, vivendo e descrevendo as dinâmicas do surfe encontrou-se os significados da relação do surfista com o mar nas sensações corporais experimentadas nas técnicas do remar, sentar, dar o joelhinho e dropar a onda. Que ser capaz de passar a rebentação é associado a um retorno bem sucedido à comunhão do homem com a natureza, sendo as cores, formas e sensações do "outside" o privilégio daquele que vence as dificuldades do tornar-se e ser surfista. Mas, que estas sensações são tidas como possibilidades de corpos corajosos e hábeis, "a priori", entendidos como corpos masculinos. O surfe como campo em que o feminino é visto ainda como exceção dá a pensar que os esportes na natureza e a educação ao ar livre, embora tenham potencial de promover novas condutas políticas e a virtuosa sensibilidade ambiental, não estão livres de reproduzir outros padrões de dominação.The main goal of this research is to describe the dynamics of surfing and its meanings, mainly the human/nature relation established through the sport. Meanwhile, other goals were added: discussing the approach to the field by the researcher, the possibility this researcher could investigate through her own body and the gender matter in the sport. About the main aim of the research, living and experiencing the sport itself, meaning, to the relation between the surfer and the sea, was found in the body sensations experienced through techniques such as paddling, sitting, duck diving and dropping a wave. Being

  17. Spatially Uniform ReliefF (SURF for computationally-efficient filtering of gene-gene interactions

    Directory of Open Access Journals (Sweden)

    Greene Casey S

    2009-09-01

    Full Text Available Abstract Background Genome-wide association studies are becoming the de facto standard in the genetic analysis of common human diseases. Given the complexity and robustness of biological networks such diseases are unlikely to be the result of single points of failure but instead likely arise from the joint failure of two or more interacting components. The hope in genome-wide screens is that these points of failure can be linked to single nucleotide polymorphisms (SNPs which confer disease susceptibility. Detecting interacting variants that lead to disease in the absence of single-gene effects is difficult however, and methods to exhaustively analyze sets of these variants for interactions are combinatorial in nature thus making them computationally infeasible. Efficient algorithms which can detect interacting SNPs are needed. ReliefF is one such promising algorithm, although it has low success rate for noisy datasets when the interaction effect is small. ReliefF has been paired with an iterative approach, Tuned ReliefF (TuRF, which improves the estimation of weights in noisy data but does not fundamentally change the underlying ReliefF algorithm. To improve the sensitivity of studies using these methods to detect small effects we introduce Spatially Uniform ReliefF (SURF. Results SURF's ability to detect interactions in this domain is significantly greater than that of ReliefF. Similarly SURF, in combination with the TuRF strategy significantly outperforms TuRF alone for SNP selection under an epistasis model. It is important to note that this success rate increase does not require an increase in algorithmic complexity and allows for increased success rate, even with the removal of a nuisance parameter from the algorithm. Conclusion Researchers performing genetic association studies and aiming to discover gene-gene interactions associated with increased disease susceptibility should use SURF in place of ReliefF. For instance, SURF should be

  18. Drones at the Beach - Surf Zone Monitoring Using Rotary Wing Unmanned Aerial Vehicles

    Science.gov (United States)

    Rynne, P.; Brouwer, R.; de Schipper, M. A.; Graham, F.; Reniers, A.; MacMahan, J. H.

    2014-12-01

    We investigate the potential of rotary wing Unmanned Aerial Vehicles (UAVs) to monitor the surf zone. In recent years, the arrival of lightweight, high-capacity batteries, low-power electronics and compact high-definition cameras has driven the development of commercially available UAVs for hobbyists. Moreover, the low operation costs have increased their potential for scientific research as these UAVs are extremely flexible surveying platforms. The UAVs can fly for ~12 min with a mean loiter radius of 1 - 3.5 m and a mean loiter error of 0.75 - 4.5 m, depending on the environmental conditions, flying style, battery type and vehicle type. Our experiments using multiple, alternating UAVs show that it is possible to have near continuous imagery data with similar Fields Of View. The images obtained from the UAVs (Fig. 1a), and in combination with surveyed Ground Control Points (GCPs) (Fig. 1b, red squares and white circles), can be geo-rectified (Fig. 1c) to pixel resolution between 0.01 - 1 m and a reprojection error, i.e. the difference between the surveyed GPS location of a GCP and the location of the GCP obtained from the geo-rectified image, of O(1 m). These geo-rectified images provide data on a variety of coastal aspects, such as beach width (Wb(x,t)), surf zone width (Wsf(x,t)), wave breaking location (rectangle B), beach usage (circle C) and location of dune vegegation (rectangle D), amongst others. Additionally, the possibility to have consecutive, high frequency (up to 2 Hz) rectified images makes the UAVs a great data instrument for spatially and temporally variable systems, such as the surf zone. Our first observations with the UAVs reveal the potential to quickly obtain surf zone and beach characteristics in response to storms or for day to day beach information, as well as the scientific pursuits of surf zone kinematics on different spatial and temporal scales, and dispersion and advection estimates of pollutants/dye. A selection of findings from

  19. Surf observations from the South Shore of Oahu, Hawaii from 01 March 1972 to 20 November 1987 (NODC Accession 0000274)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Heights of breaking surf were collected by using visual observations from swimmers or divers at the South Shore of Oahu, Hawaii from March 1, 1972 to November 20,...

  20. Composition, Shell Strength, and Metabolizable Energy of Mulinia lateralis and Ischadium recurvum as Food for Wintering Surf Scoters (Melanitta perspicillata.

    Directory of Open Access Journals (Sweden)

    Alicia M Wells-Berlin

    Full Text Available Decline in surf scoter (Melanitta perspicillata waterfowl populations wintering in the Chesapeake Bay has been associated with changes in the availability of benthic bivalves. The Bay has become more eutrophic, causing changes in the benthos available to surf scoters. The subsequent decline in oyster beds (Crassostrea virginica has reduced the hard substrate needed by the hooked mussel (Ischadium recurvum, one of the primary prey items for surf scoters, causing the surf scoter to switch to a more opportune species, the dwarf surfclam (Mulinia lateralis. The composition (macronutrients, minerals, and amino acids, shell strength (N, and metabolizable energy (kJ of these prey items were quantified to determine the relative foraging values for wintering scoters. Pooled samples of each prey item were analyzed to determine composition. Shell strength (N was measured using a shell crack compression test. Total collection digestibility trials were conducted on eight captive surf scoters. For the prey size range commonly consumed by surf scoters (6-12 mm for M. lateralis and 18-24 mm for I. recurvum, I. recurvum contained higher ash, protein, lipid, and energy per individual organism than M. lateralis. I. recurvum required significantly greater force to crack the shell relative to M. lateralis. No difference in metabolized energy was observed for these prey items in wintering surf scoters, despite I. recurvum's higher ash content and harder shell than M. lateralis. Therefore, wintering surf scoters were able to obtain the same amount of energy from each prey item, implying that they can sustain themselves if forced to switch prey.

  1. Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Mid-Atlantic). SURF CLAM

    Science.gov (United States)

    1983-10-01

    invisible, outer, jellylike layer and mine surf clam gender (Ropes et al. the germinal vesicle (Ropes 1980). 1969). Male and female surf clams Longo...Jacobsen, M. K., and W. E. Old, Jr. Lindley, M. G., and R. S. Shallen- 1966. On the identity of Spisula berger. 1976, Purification and similis. Am...1966. A quantitative Masse, H. 1975. Feeding biotogy of .3-year-survey on the meiofauna Astropecten aranciacus. Cah , of known macrofauna communities

  2. Composition, shell strength, and metabolizable energy of Mulinia lateralis and Ischadium recurvum as food for wintering surf scoters (Melanitta perspicillata)

    Science.gov (United States)

    Berlin, Alicia; Perry, Matthew; Kohn, R.A.; Paynter, K.T.; Ottinger, Mary Ann

    2015-01-01

    Decline in surf scoter (Melanitta perspicillata) waterfowl populations wintering in the Chesapeake Bay has been associated with changes in the availability of benthic bivalves. The Bay has become more eutrophic, causing changes in the benthos available to surf scoters. The subsequent decline in oyster beds (Crassostrea virginica) has reduced the hard substrate needed by the hooked mussel (Ischadium recurvum), one of the primary prey items for surf scoters, causing the surf scoter to switch to a more opportune species, the dwarf surfclam (Mulinia lateralis). The composition (macronutrients, minerals, and amino acids), shell strength (N), and metabolizable energy (kJ) of these prey items were quantified to determine the relative foraging values for wintering scoters. Pooled samples of each prey item were analyzed to determine composition. Shell strength (N) was measured using a shell crack compression test. Total collection digestibility trials were conducted on eight captive surf scoters. For the prey size range commonly consumed by surf scoters (6-12 mm for M. lateralis and 18-24 mm for I. recurvum), I. recurvum contained higher ash, protein, lipid, and energy per individual organism than M. lateralis. I. recurvum required significantly greater force to crack the shell relative to M. lateralis. No difference in metabolized energy was observed for these prey items in wintering surf scoters, despite I. recurvum's higher ash content and harder shell than M. lateralis. Therefore, wintering surf scoters were able to obtain the same amount of energy from each prey item, implying that they can sustain themselves if forced to switch prey.

  3. Bacterial deposition to fluoridated and non-fluoridated polyurethane coatings with different elastic modulus and surface tension in a parallel plate and a stagnation point flow chamber

    NARCIS (Netherlands)

    Bakker, D.P.; Huijs, F.M.; Vries, J. de; Klijnstra, J.W.; Busscher, H.J.; Mei, H.C. van der

    2003-01-01

    Deposition of three marine bacterial strains with different cell surface hydrophobicities from artificial seawater to polyurethane coatings on glass with different surface tensions and elastic modulus was studied in situ in a parallel plate (PP) and stagnation point (SP) flow chamber. Different surf

  4. SurfKin: an ab initio kinetic code for modeling surface reactions.

    Science.gov (United States)

    Le, Thong Nguyen-Minh; Liu, Bin; Huynh, Lam K

    2014-10-05

    In this article, we describe a C/C++ program called SurfKin (Surface Kinetics) to construct microkinetic mechanisms for modeling gas-surface reactions. Thermodynamic properties of reaction species are estimated based on density functional theory calculations and statistical mechanics. Rate constants for elementary steps (including adsorption, desorption, and chemical reactions on surfaces) are calculated using the classical collision theory and transition state theory. Methane decomposition and water-gas shift reaction on Ni(111) surface were chosen as test cases to validate the code implementations. The good agreement with literature data suggests this is a powerful tool to facilitate the analysis of complex reactions on surfaces, and thus it helps to effectively construct detailed microkinetic mechanisms for such surface reactions. SurfKin also opens a possibility for designing nanoscale model catalysts.

  5. Experimental and numerical investigation of the internal kinetics of a surf-zone plunging breaker

    DEFF Research Database (Denmark)

    Emarat, Narumon; Forehand, David I.M.; Christensen, Erik Damgaard

    2012-01-01

    Over the last couple of decades both the qualitative and quantitative understanding of breaking waves in the surf zone have greatly increased. This is due to the advances in experimental and numerical techniques. However, few comparisons between these two different investigative techniques...... for surfzone breaking waves have been reported. In this study, a comparison is made between the experimental and numerical investigation of the internal kinematics of a surf-zone plunging breaker. The full-field velocity measuring technique known as Particle Image Velocimetry (PIV) is used in the experiments....... In the hybrid numerical scheme, the main model solves the Navier–Stokes equations using a Finite Volume method and the free-surface is simulated using a Volume of Fluid (VOF) method. An important feature of this work is that, unlike in most other comparisons between numerical and experimental results, the exact...

  6. An Improvement of Positional Accuracy for View-Based Navigation Using SURF

    Science.gov (United States)

    Hagiwara, Yoshinobu; Imamura, Hiroki; Choi, Yongwoon; Watanabe, Kazuhiro

    In this paper, we propose a reliable method for view-based navigation of mobile robots fully improved in positional accuracy by using feature-points extracted by SURF, and it is verified from the navigation experiments of them. View-based navigations that have used block matching method are not enough in positional accuracy for robots to avoid obstacles and pass narrow doorways. By applying SURF that is stable to illumination and scale changes in an image to the method for view-based navigation, the navigation for robots becomes more robust to variable indoor conditions. In experiments conducted in an indoor corridor with a robot for comparing the proposed method to conventional one, the positional precision was obtained in centimeter-order of within 10.0[cm]. In this view, it suggests that the proposed method is applied to the view-based navigation for robots in such narrow areas as obstacle avoidance and corridors.

  7. Sobre as ondas: surfe, juventude e cultura no Rio de Janeiro dos anos 1960

    Directory of Open Access Journals (Sweden)

    Cleber Dias

    2012-06-01

    Full Text Available Na segunda metade do século XX, torna-se explícita a influência mundial dos Estados Unidos no âmbito esportivo. A disseminação de práticas que possuíam marcas culturais norte-americanas, como é o caso do surfe, não deve ser considerada, contudo, somente como resultado de uma imposição unilateral: há múltiplas apropriações locais que dizem muito sobre o contexto do receptor. Partindo dessa consideração, este artigo objetiva discutir a apreensão do surfe no Rio de Janeiro dos anos 1960. Buscamos debater como a modalidade foi operada como marcador de identidades a partir de vinculações a certas noções de juventude e estilo de vida.

  8. Movements of wintering surf scoters: Predator responses to different prey landscapes

    Science.gov (United States)

    Kirk, M.; Esler, Daniel; Iverson, S.A.; Boyd, W.S.

    2008-01-01

    The distribution of predators is widely recognized to be intimately linked to the distribution of their prey. Foraging theory suggests that predators will modify their behaviors, including movements, to optimize net energy intake when faced with variation in prey attributes or abundance. While many studies have documented changes in movement patterns of animals in response to temporal changes in food, very few have contrasted movements of a single predator species naturally occurring in dramatically different prey landscapes. We documented variation in the winter movements, foraging range size, site fidelity, and distribution patterns of a molluscivorous sea duck, the surf scoter (Melanitta perspicillata), in two areas of coastal British Columbia with very different shellfish prey features. Baynes Sound has extensive tidal flats with abundant clams, which are high-quality and temporally stable prey for scoters. Malaspina Inlet is a rocky fjord-like inlet where scoters consume mussels that are superabundant and easily accessible in some patches but are heavily depleted over the course of winter. We used radio telemetry to track surf scoter movements in both areas and found that in the clam habitats of Baynes Sound, surf scoters exhibited limited movement, small winter ranges, strong foraging site fidelity, and very consistent distribution patterns. By contrast, in mussel habitats in the Malaspina Inlet, surf scoters displayed more movement, larger ranges, little fidelity to specific foraging sites, and more variable distribution patterns. We conclude that features associated with the different prey types, particularly the higher depletion rates of mussels, strongly influenced seasonal space use patterns. These findings are consistent with foraging theory and confirm that predator behavior, specifically movements, is environmentally mediated. ?? 2008 Springer-Verlag.

  9. On trend and on the wave: carving cultural identity through active surf dress

    OpenAIRE

    Anderson, Jonathan Mark

    2015-01-01

    Clothing, as both functional and fashionable, has become a key marker in signifying and shaping personal identity. This is particularly clear in a range of “lifestyle sports” [Wheaton, B. 2004. “Introduction: Mapping the Lifestyle Sportscape.” In Understanding Lifestyle Sports: Consumption, Identity, and Difference, edited by B. Wheaton, 1–28. London: Routledge], including the array of practices associated with the culture of surfing. This paper examines the ways in which companies market per...

  10. "Sub-Surf Rocks"! An A-Level Resource Developed through an Industry-Education Collaboration

    Science.gov (United States)

    Mather, Hazel

    2012-01-01

    A free internet resource called "Sub-Surf Rocks"! was launched in 2010. Its aim is to use seismic data obtained by the oil industry for enhancing the teaching of structural and economic geology at A-level (ages 16-18) in the UK. Seismic data gives a unique insight into the sub-surface and the many high-quality images coupled with…

  11. Effects of water temperature change on immune function in surf clams, Mactra veneriformis (Bivalvia: Mactridae).

    Science.gov (United States)

    Yu, Jin Ha; Song, Jae Hee; Choi, Min Chul; Park, Sung Woo

    2009-09-01

    Surf clam, Mactra veneriformis is one of the crucial fishery resources in Korea. This study was performed to examine the immune functions of the surf clam under the stress of water temperature changes at 10 degrees C, 20 degrees C or 30 degrees C for 24h. Viable bacterial counts (VBC), total haemocyte count (THC), phagocytic activity, lysozyme activity, NRR times and SOD activity were assessed in three different water temperature groups. Clams held at 10 degrees C decreased in THC, lysozyme activity and NRR times, but phagocytic activity was increased. The highest temperature (30 degrees C) significantly increased in THC, whereas it decreased in phagocytic activity, lysozyme activity and NRR times. In clams maintained at 20 degrees C, phagocytic activity, lysozyme activity and NRR times were increased whereas THC was somewhat decreased with respect to clams held at 30 degrees C. However, water temperature changes did not elicit any alteration of VBC and SOD activity. The present study demonstrates that acute water temperature change affects the haemocytic and haemolymphatic functions, reducing immunosurveillance in stressed surf clam, M. veneriformis.

  12. Mutations in the SURF1 gene associated with Leigh syndrome and cytochrome C oxidase deficiency.

    Science.gov (United States)

    Péquignot, M O; Dey, R; Zeviani, M; Tiranti, V; Godinot, C; Poyau, A; Sue, C; Di Mauro, S; Abitbol, M; Marsac, C

    2001-05-01

    Cytochrome c oxidase (COX) deficiency is one of the major causes of Leigh Syndrome (LS), a fatal encephalopathy of infancy or childhood, characterized by symmetrical lesions in the basal ganglia and brainstem. Mutations in the nuclear genes encoding COX subunits have not been found in patients with LS and COX deficiency, but mutations have been identified in SURF1. SURF1 encodes a factor involved in COX biogenesis. To date, 30 different mutations have been reported in 40 unrelated patients. We aim to provide an overview of all known mutations in SURF1, and to propose a common nomenclature. Twelve of the mutations were insertion/deletion mutations in exons 1, 4, 6, 8, and 9; 10 were missense/nonsense mutations in exons 2, 4, 5, 7, and 8; and eight were detected at splicing sites in introns 3 to 7. The most frequent mutation was 312_321del 311_312insAT which was found in 12 patients out of 40. Twenty mutations have been described only once. We also list all polymorphisms discovered to date.

  13. Does human pressure affect the community structure of surf zone fish in sandy beaches?

    Science.gov (United States)

    Costa, Leonardo Lopes; Landmann, Júlia G.; Gaelzer, Luiz R.; Zalmon, Ilana R.

    2017-01-01

    Intense tourism and human activities have resulted in habitat destruction in sandy beach ecosystems with negative impacts on the associated communities. To investigate whether urbanized beaches affect surf zone fish communities, fish and their benthic macrofaunal prey were collected during periods of low and high human pressure at two beaches on the Southeastern Brazilian coast. A BACI experimental design (Before-After-Control-Impact) was adapted for comparisons of tourism impact on fish community composition and structure in urbanized, intermediate and non-urbanized sectors of each beach. At the end of the summer season, we observed a significant reduction in fish richness, abundance, and diversity in the high tourist pressure areas. The negative association between visitors' abundance and the macrofaunal density suggests that urbanized beaches are avoided by surf zone fish due to higher human pressure and the reduction of food availability. Our results indicate that surf zone fish should be included in environmental impact studies in sandy beaches, including commercial species, e.g., the bluefish Pomatomus saltatrix. The comparative results from the less urbanized areas suggest that environmental zoning and visitation limits should be used as effective management and preservation strategies on beaches with high conservation potential.

  14. ConSurf 2016: an improved methodology to estimate and visualize evolutionary conservation in macromolecules.

    Science.gov (United States)

    Ashkenazy, Haim; Abadi, Shiran; Martz, Eric; Chay, Ofer; Mayrose, Itay; Pupko, Tal; Ben-Tal, Nir

    2016-07-08

    The degree of evolutionary conservation of an amino acid in a protein or a nucleic acid in DNA/RNA reflects a balance between its natural tendency to mutate and the overall need to retain the structural integrity and function of the macromolecule. The ConSurf web server (http://consurf.tau.ac.il), established over 15 years ago, analyses the evolutionary pattern of the amino/nucleic acids of the macromolecule to reveal regions that are important for structure and/or function. Starting from a query sequence or structure, the server automatically collects homologues, infers their multiple sequence alignment and reconstructs a phylogenetic tree that reflects their evolutionary relations. These data are then used, within a probabilistic framework, to estimate the evolutionary rates of each sequence position. Here we introduce several new features into ConSurf, including automatic selection of the best evolutionary model used to infer the rates, the ability to homology-model query proteins, prediction of the secondary structure of query RNA molecules from sequence, the ability to view the biological assembly of a query (in addition to the single chain), mapping of the conservation grades onto 2D RNA models and an advanced view of the phylogenetic tree that enables interactively rerunning ConSurf with the taxa of a sub-tree.

  15. CAMSHIFT IMPROVEMENT WITH MEAN-SHIFT SEGMENTATION, REGION GROWING, AND SURF METHOD

    Directory of Open Access Journals (Sweden)

    Ferdinan Ferdinan

    2013-10-01

    Full Text Available CAMSHIFT algorithm has been widely used in object tracking. CAMSHIFT utilizescolor features as the model object. Thus, original CAMSHIFT may fail when the object color issimilar with the background color. In this study, we propose CAMSHIFT tracker combined withmean-shift segmentation, region growing, and SURF in order to improve the tracking accuracy.The mean-shift segmentation and region growing are applied in object localization phase to extractthe important parts of the object. Hue-distance, saturation, and value are used to calculate theBhattacharyya distance to judge whether the tracked object is lost. Once the object is judged lost,SURF is used to find the lost object, and CAMSHIFT can retrack the object. The Object trackingsystem is built with OpenCV. Some measurements of accuracy have done using frame-basedmetrics. We use datasets BoBoT (Bonn Benchmark on Tracking to measure accuracy of thesystem. The results demonstrate that CAMSHIFT combined with mean-shift segmentation, regiongrowing, and SURF method has higher accuracy than the previous methods.

  16. Rip currents and alongshore flows in single channels dredged in the surf zone

    Science.gov (United States)

    Moulton, Melissa; Elgar, Steve; Raubenheimer, Britt; Warner, John C.; Kumar, Nirnimesh

    2017-05-01

    To investigate the dynamics of flows near nonuniform bathymetry, single channels (on average 30 m wide and 1.5 m deep) were dredged across the surf zone at five different times, and the subsequent evolution of currents and morphology was observed for a range of wave and tidal conditions. In addition, circulation was simulated with the numerical modeling system COAWST, initialized with the observed incident waves and channel bathymetry, and with an extended set of wave conditions and channel geometries. The simulated flows are consistent with alongshore flows and rip-current circulation patterns observed in the surf zone. Near the offshore-directed flows that develop in the channel, the dominant terms in modeled momentum balances are wave-breaking accelerations, pressure gradients, advection, and the vortex force. The balances vary spatially, and are sensitive to wave conditions and the channel geometry. The observed and modeled maximum offshore-directed flow speeds are correlated with a parameter based on the alongshore gradient in breaking-wave-driven-setup across the nonuniform bathymetry (a function of wave height and angle, water depths in the channel and on the sandbar, and a breaking threshold) and the breaking-wave-driven alongshore flow speed. The offshore-directed flow speed increases with dissipation on the bar and reaches a maximum (when the surf zone is saturated) set by the vertical scale of the bathymetric variability.

  17. Wave Height Distribution for Spilling Waves in and outside the Surf Zone

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The wave characteristics affecting coastal sediment transport include wave height, wave period and breaking wave direction. Wave height is a critical factor in determining the amount of sediment transport in the coastal area. The force of sediment transport is much more intense under breaking waves than under non-breaking waves. Breaking waves exhibit various patterns, principally depending on the incident wave steepness and the beach slope. Based on the equations of conservation of mass, momentum and energy, a theoretical model for wave deformation in and outside the surf zone was obtained, which is used to calculate the wave shoaling, wave set-up and setdown and wave height distributions in and outside the surf zone. The analysis and comparison were made about the breaking point location and the wave height decay caused by the wave breaking and the bottom friction. Flume experiments relating to the spilling wave height distribution across the surf zone were conducted to verify the theoretical model. Advanced wave maker, data sampling devices and data processing system were utilized in the flume experiments with a slope covered by sands of different diameters to facilitate the observation and research on the wave transformation and breaking. The agreement between the theoretical and experimental results is good.

  18. Rip currents and alongshore flows in single channels dredged in the surf zone

    Science.gov (United States)

    Moulton, Melissa; Elgar, Steve; Raubenheimer, Britt; Warner, John C.; Kumar, Nirnimesh

    2017-01-01

    To investigate the dynamics of flows near nonuniform bathymetry, single channels (on average 30 m wide and 1.5 m deep) were dredged across the surf zone at five different times, and the subsequent evolution of currents and morphology was observed for a range of wave and tidal conditions. In addition, circulation was simulated with the numerical modeling system COAWST, initialized with the observed incident waves and channel bathymetry, and with an extended set of wave conditions and channel geometries. The simulated flows are consistent with alongshore flows and rip-current circulation patterns observed in the surf zone. Near the offshore-directed flows that develop in the channel, the dominant terms in modeled momentum balances are wave-breaking accelerations, pressure gradients, advection, and the vortex force. The balances vary spatially, and are sensitive to wave conditions and the channel geometry. The observed and modeled maximum offshore-directed flow speeds are correlated with a parameter based on the alongshore gradient in breaking-wave-driven-setup across the nonuniform bathymetry (a function of wave height and angle, water depths in the channel and on the sandbar, and a breaking threshold) and the breaking-wave-driven alongshore flow speed. The offshore-directed flow speed increases with dissipation on the bar and reaches a maximum (when the surf zone is saturated) set by the vertical scale of the bathymetric variability.

  19. Zonation of macrofauna across sandy beaches and surf zones along the Dutch coast

    Directory of Open Access Journals (Sweden)

    Gerard Janssen

    2005-06-01

    Full Text Available On nine beaches and two transects in the surf zone along the Dutch coast the presence of benthic macrofauna was studied in relation to basic abiotic characteristics. According to Short's classification system, Dutch beaches are mesotidal and dissipative (Ω = 8.6, and the RTR is low (1.52-1.27, which means that they are not tide-dominated. BSI ranged from 1.4 to 1.1 for the northern and western Dutch coasts respectively and had an overall value of 1.2. The rates of exposure of the beaches varied between 8 and 12, and are therefore regarded as sheltered to moderately exposed. The Dutch beaches display a geographical trend in beach types. Those of the Wadden Sea islands in the northern part of the Netherlands are dissipative, flat, fine-grained, and host high densities of many species of benthic macrofauna. The beaches along the western Dutch coast are less dissipative, steeper, with a higher mean grain size; the species diversity and abundance there are lower. Species diversity and abundance on the beaches increase from the high- to the low-water line. The maximum number of species was found between 0 and -1 m relative to the mean tidal level. The abundance peaks just above the mean tidal level, while the biomass reaches a maximum at the mean tidal level.     Species diversity and abundance are low in the surf zone, but increase towards deeper water. Species numbers are high and the abundance is very high in the trough between the two bars.     The relation between the diversity and abundance of macrobenthic species on the one hand, and the sediment composition, water column depth, and position between the bars on the other show a clear pattern of zonation for the beach, surf zone and near-shore: (1 a supralittoral zone with insects and air-breathing crustaceans, (2 a midshore zone, with intertidal species, (3 a lower shore zone, whose species extend into the shallow surf zone, and (4 a zone of sublittoral fauna in the trough between the

  20. Surf zone fauna of Ecuadorian sandy beaches: Spatial and temporal patterns

    Science.gov (United States)

    Marin Jarrin, J. R.; Vanaverbeke, J.; Fockedey, N.; de Grunauer, M. del P. Cornejo R.; Dominguez-Granda, L.

    2017-02-01

    Sandy beaches and their surf zones are the most common open shoreline habitat; however, surf zone fauna in the tropics is one of the least studied communities in the world. In the current study, we tested the hypothesis that Ecuadorian surf zone hyperbenthos (invertebrates and vertebrates 1-5 mm in length) and epibenthos (fish and macrocrustaceans > 5 mm in length) vary among beaches and seasons. Therefore, the fauna was described and related to environmental variables. In addition, indicator taxa were identified. The hyperbenthos was divided into holo- and mero-hyperbenthos depending on whether taxa were present during their entire life or only early life stages, respectively. Samples were collected at eight different beaches during the wet, dry and intermediate or transitional season during the low spring tide, from 1999 to 2000, using a hyperbenthic sledge and epibenthic trawl. A total of 447 hyperbenthic and 30 epibenthic taxa were collected, most of which were crustaceans and fish, respectively (52 and 60% of taxa). The mysid, Metamysidopsis sp., was the most abundant member of the hyperbenthos (average ± SD: 14,425 ± 40,039 ind. 100 m- 2, present in 92% of samples collected), and the swimming blue crab, Areneus mexicanus, was the most encountered species among the epibenthos (1 ± 1 ind. 100 m- 2, 97% of samples collected). All faunal groups varied among beaches, while the holo-hyperbenthos and less strongly the epibenthos varied among seasons. Variability in the three faunas among beaches, distance from the continental slope and the Guayas estuarine system, and beach water physical characteristics were all strongly correlated suggesting adjacent habitats can influence surf zone biological communities and water physical characteristics. Seasonal effects were related to changes in water physical characteristics among seasons potentially reflecting changes in oceanic currents. These results suggest that, similarly to other beaches around the world, Ecuadorian

  1. Ichthyoplankton in a southern african surf zone: Nursery area for the postlarvae of estuarine associated fish species?

    Science.gov (United States)

    Whitfield, A. K.

    1989-12-01

    The surf zone ichthyoplankton of Swartvlei Bay was studied between February 1986 and June 1987, with particular emphasis on its potential role as a nursery area for estuarine associated marine fish species. Larvae and/or postlarvae of 16 families were identified from the surf zone, with the Gobiidae, Soleidae, Sparidae and Mugilidae comprising 85·7% of all teleosts sampled. The postlarvae of several taxa (including the six most common species), which utilize the Swartvlei estuary as a juvenile nursery area, were abundant in the surf zone. Conversely, species which are common in nearshore marine waters as juveniles and adults, but seldom enter estuaries, totalled less than 8% of the surf zone ichthyoplankton assemblage. Larval and postlarval densities peaked during summer when water temperatures exceeded 19°C and the estuary mouth was open. Concentrations of ichthyoplankton were highest at those sampling stations closest to the estuary mouth during the summer period. Diel changes in total catches revealed no significant difference between day and night densities; but of the four major taxa, the Mugilidae and Sparidae tended to be more abundant during the day, the Gobiidae at night and the Soleidae showed no distinct pattern. Results from a 24 h sampling session indicated that tidal phase may also be important in governing ichthyoplankton abundance in the surf zone.

  2. Scaled photographs of surf over the full range of breaker sizes on the north shore of Oahu and Jaws, Maui, Hawaiian Islands, January 1998 - May 2004 (NODC Accession 0001753)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital surf photographs were scaled using surfers as height benchmarks to estimate the size of the breakers. Historical databases for surf height in Hawaii are...

  3. Upper-bound modelization of an ironed three-layered polymer-coated steel strip

    OpenAIRE

    2012-01-01

    Global beverage can and food container consumption is very high, with billions of cans produced annually worldwide. There are several steps in can manufacturing, but ironing is the most crucial. In a previous work (Sellés et al., J Mater Process Technol 202:7-14, 2008), a series of ironing experiments were reported using a new material and an ironing simulator. This material was a three-layered polymer-coated steel, and it was seen that under some process conditions, it survived the ironing p...

  4. Prediction and assimilation of surf-zone processes using a Bayesian network: Part I: Forward models

    Science.gov (United States)

    Plant, Nathaniel G.; Holland, K. Todd

    2011-01-01

    Prediction of coastal processes, including waves, currents, and sediment transport, can be obtained from a variety of detailed geophysical-process models with many simulations showing significant skill. This capability supports a wide range of research and applied efforts that can benefit from accurate numerical predictions. However, the predictions are only as accurate as the data used to drive the models and, given the large temporal and spatial variability of the surf zone, inaccuracies in data are unavoidable such that useful predictions require corresponding estimates of uncertainty. We demonstrate how a Bayesian-network model can be used to provide accurate predictions of wave-height evolution in the surf zone given very sparse and/or inaccurate boundary-condition data. The approach is based on a formal treatment of a data-assimilation problem that takes advantage of significant reduction of the dimensionality of the model system. We demonstrate that predictions of a detailed geophysical model of the wave evolution are reproduced accurately using a Bayesian approach. In this surf-zone application, forward prediction skill was 83%, and uncertainties in the model inputs were accurately transferred to uncertainty in output variables. We also demonstrate that if modeling uncertainties were not conveyed to the Bayesian network (i.e., perfect data or model were assumed), then overly optimistic prediction uncertainties were computed. More consistent predictions and uncertainties were obtained by including model-parameter errors as a source of input uncertainty. Improved predictions (skill of 90%) were achieved because the Bayesian network simultaneously estimated optimal parameters while predicting wave heights.

  5. Spatial and temporal variability in surf zone fish assemblages on the coast of northern New Jersey

    Science.gov (United States)

    Wilber, D. H.; Clarke, D. G.; Burlas, M. H.; Ruben, H.; Will, R. J.

    2003-02-01

    The surf zone fish community along 15 km of northern New Jersey shoreline was sampled every 2 weeks by beach seine in the late summers and early falls of 1995-1999 in conjunction with monitoring of a beach nourishment project. Fifty-seven species representing 30 families were collected during the course of the study. Over 90% of each sampling period's catch was composed of five taxa or less. These taxa included Atlantic and rough silversides, Menidia menidia and Membras martinica, bluefish, Pomatomus saltatrix, and bay and striped anchovies, Anchoa mitchilli and Anchoa hepsetus, with the relative contributions of these taxa varying among years. Both bluefish and anchovy abundances varied by an order of magnitude among years. Size-frequency distributions indicate summer-spawned bluefish recruit to the surf zone habitat as two cohorts in August and October, respectively. Fish abundance and richness were greater at substations closest to rock groins. Taxonomic richness declined along with decreasing water temperature in the fall, but was not correlated with turbidity or tide stage (measured as minutes before or after low tide). The extensive sampling effort undertaken in this study, 2190 seine hauls that captured 295 868 fish, was examined in relation to the number and relative proportions of taxa collected. Species accumulation curves and percent similarity calculations were used to investigate the adequacy of a reduced sampling protocol in characterizing the taxonomic composition of the surf zone fish community. Calculations from eight complete sampling periods (84 seine hauls each) indicate that a reduction in sampling effort by one-half would have yielded on average 75% of the total number of species captured with approximately 85% similarity in relative species composition.

  6. Assessment of surf zone environmental variables in a southwestern Atlantic sandy beach (Monte Hermoso, Argentina).

    Science.gov (United States)

    Menéndez, M Clara; Fernández Severini, Melisa D; Buzzi, Natalia S; Piccolo, M Cintia; Perillo, Gerardo M E

    2016-08-01

    The aim of this study was to investigate the temporal dynamics (monthly/tidal) of water temperature, salinity, chlorophyll-a (chlo-a), suspended particulate matter (SPM), particulate organic carbon (POC), and dissolved nutrients in the surf zone of Monte Hermoso sandy beach, Argentina. We also aimed to understand the underlying mechanisms responsible for the observed variability. Sampling was carried out approximately monthly (September 2009-November 2010), and all samples were collected in a fixed station during high and low tide. Water temperature showed a clear seasonal variability (July: 9 °C-December: 26.5 °C) and a thermal amplitude of 17.5 °C. Salinity ranged from 33 to 37, without a pronounced seasonality. SPM (10-223 mg L(-1)) and POC concentrations (399-6445 mg C m(-3)) were high in surf zone waters. Chlo-a (0.05-9.16 μg L(-1)) was low and did not evidence the occurrence of surf diatom accumulations. Dissolved nutrient concentration was quite fluctuating. None of the variables seemed to be affected by tidal stage. The results showed how fluctuating the physico-chemical and biological variables can be in this particular system. The observed variability can be related with local beach conditions but also with regional processes. The study area is highly influenced by a neighbor estuary and as a consequence, could be vulnerable to their seasonal and inter-annual dynamics. All of these characteristics must be considered for further studies and planning of the uses of natural resources and should be taken into account in any environmental monitoring program conducted in a similar beach system.

  7. Simultaneous Observations of Beach and Surf-Zone Topography from a sUAS

    Science.gov (United States)

    Slocum, R. K.; Brodie, K. L.; Spore, N.

    2016-02-01

    Beaches and surf-zones can vary rapidly in time and space, necessitating frequent, spatially extensive observations for up-to-date knowledge on their current condition. Traditional surveying methods are expensive, can be dangerous in large wave conditions, and can lack sufficient spatial density. Existing remote sensing technologies have focused on both active sensing (airborne lidar, X-band radar) or passive sensing (electro-optical or infrared imagery) to either directly measure elevations of the beach and seafloor or exploit the optical signal of refracting and breaking waves in the surf-zone. These methods, however, can be prohibitively expensive for widespread, high temporal frequency use, or lack the spatial coverage required to quantify a large stretch of beach. UAS offer an affordable and accessible alternative, but existing COTS UAS sensor suites are not optimized for generation of bathymetry and topography at the same time. Here, we present a new approach using an inexpensive, custom multi-camera sensor designed with a wide field of view for integration on either a fixed wing of multirotor UAS platform. We introduce a processing methodology and workflow to generate a topographic pointcloud and rectified imagery of the water surface using structure from motion algorithms. The topographic pointcloud data is processed to generate a DSM of the beach and extract morphologic parameters (beach slope, dune toe, etc). Rectified imagery of the water surface is used to quantify sandbar location as well as perform a celerity based bathymetric inversion. Accuracy of this methodology is calculated by comparing processed data to lidar pointclouds, as well as photo identifiable targets on the beach and jetted into the surf zone. Funded by the USACE Military Engineering POD:A&U Program and Coastal Field Data Collection Program.

  8. Associations between Functional Movement Screen scores and performance variables in surf athletes.

    Science.gov (United States)

    Ferreira da Silva, Bruno A; Clemente, Filipe M; Lourenço Martins, Fernando M

    2017-02-22

    Functional Movement Screen (FMS) have been used to assess the movement patterns in daily sports practice. Some associations between FMS scores and physical variables have been found in some sports. Nevertheless, no study was conducted in surf. Eighteen surf athletes (11 male) participated in the study (18.3 ± 6.3 y; 60.0 ± 9.6 kg; 168.6 ± 8.1 cm). All participants completed anthropometrics, Knee to Wall test, Functional Movement Screen, Isometric Knee Extension, Handgrip, Squat and Countermovement Jump. Based on that, this study investigated: 1) the variance of FMS scores between gender; 2) the association between FMS scores and physical variables of strength of upper and lower limbs, power of lower limbs and anthropometric variables; and 3) which FMS scores best explain the physical performance variables. The analysis of comparison between gender of each item of FMS showed significant statistical differences only in Trunk Stability Push-Up (p = 0.01, ES=0.141). Kendall's Tau b correlation test between FMS scores and physical variables, revealed significant associations. After performed the stepwise multiple linear regression FMS Deep Squat and Trunk Stability Push-Up explains 57% of Knee to Wall test - right side and the model is statistically significant (F(2. 15) = 13.097; p-value = 0.001). In Squat Jump (height) the results show that FMS Trunk Stability Push-Up explains 50.3% of this dimension and the model is statistically significant (F(1. 16) = 18.182; p-value = 0.001). FMS individual scores seems to better explain physical variables than total score. Only Trunk Stability Push-Up test seems to be a reliable indicator to predict physical performance in surf athletes.

  9. Modification of the Undertow and Turbulence by Submerged Vegetation in a Laboratory Surf Zone

    Science.gov (United States)

    Mandel, T.; Suckale, J.; Marras, S.; Maldonado, S.; Koseff, J. R.

    2016-12-01

    Breaking waves in the surf zone are a dominant factor shaping the evolution of our coastlines. The turbulence generated by wave breaking causes sediment resuspension, while wave runup, rundown, and the undertow transport this sediment along and across the shore (Longo et al., 2002). Coastal hazard models must now address the added complications of climate change, including sea level rise, stronger storm events, and ecosystem degradation (Arkema et al., 2013). A robust theoretical understanding of surf zone dynamics is therefore imperative to considering the magnitude and implications of these potential changes. However, little work has been done to extend our current theoretical understanding to realistic beach faces, with aquatic vegetation, reefs, and other roughness elements that might mitigate scour and sedimentation. Clarifying these relationships will help scientists and policy-makers decide where to focus ecosystem restoration and preservation efforts, in order to maximize their protective benefits to infrastructure and economic activity on the coast. In order to evaluate the role of vegetation in coastal protection, we conducted a series of experiments in an idealized laboratory surf zone. We examine the impact of submerged model vegetation on the undertow profile, wave orbital velocities, turbulent kinetic energy, and wave-induced stresses, and compare these results to theoretical formulations that model these quantities. We find that vegetation reduces the wave energy available to be converted to turbulent kinetic energy during breaking, indicating a mechanism to mitigate suspension of sediment. Vegetation also reduces the magnitude of the undertow, likely reducing transport of sediment offshore. These results suggest that vegetation provides significant protective benefits for coastal communities at risk from erosion beyond its well-characterized ability to attenuate wave height, and motivate further work to incorporate these effects into models of near

  10. QSAR study and VolSurf characterization of anti-HIV quinolone library

    Science.gov (United States)

    Filipponi, Enrica; Cruciani, Gabriele; Tabarrini, Oriana; Cecchetti, Violetta; Fravolini, Arnaldo

    2001-03-01

    Antiviral quinolones are promising compounds in the search for new therapeutically effective agents for the treatment of AIDS. To rationalize the SAR for this new interesting class of anti-HIV derivatives, we performed a 3D-QSAR study on a library of 101 6-fluoro and 6-desfluoroquinolones, taken either from the literature or synthesized by us. The chemometric procedure involved a fully semiempirical minimization of the molecular structures by the AMSOL program, which takes into account the solvatation effect, and their 3D characterization by the VolSurf/GRID program. The QSAR analysis, based on PCA and PLS methods, shows the key structural features responsible for the antiviral activity.

  11. Internal waves and surf zone water quality at Huntington Beach, California

    Science.gov (United States)

    Wong, H.; Santoro, A.; Nidzieko, N. J.; Hench, J. L.; Boehm, A. B.

    2011-12-01

    This study characterized diurnal, semi-diurnal, and high-frequency internal wave field at Huntington Beach, California, USA and the connection between internal waves and surf zone water quality. An array of oceanographic moorings was deployed in the summer of 2005 and 2006 at 10-20 meter depths offshore of the beach to observe internal waves and cross-shore exchange. Concurrently, surf zone water quality was assessed twice daily at an adjacent station (Huntington State Beach) with measurements of phosphate, dissolved inorganic nitrogen, silicate, chlorophyll a, fecal indicator bacteria, and the human-specific fecal DNA marker in Bacteroidales. Spectral analysis of water temperature shows well-defined spectral peaks at diurnal and semi-diurnal frequencies. Complex Empirical Orthogonal Function analysis of observed currents reveals that the baroclinic component (summation of second to fifth principal components) accounted for 30% of the total variance in the currents in both years, indicating the importance of density-driven flow during the summer when the water column was stratified. The major axis of the first principal component was oriented alongshore, whereas that of the second and third principal components made an angle of 25 to 55 degree with the cross-shore direction. Arrival of cold subthermocline water in the very near shore (within 1 km of the surf zone) was characterized by strong onshore flow near the bottom of the water column. The near bottom, baroclinic, cross-shore current was significantly lag-correlated with the near bottom temperature data along a cross-shore transect towards shore, indicative of shoreward transport of cold subthermocline water. Wavelet analysis of temperature data showed that non-stationary temperature fluctuations were correlated with buoyancy frequency and the near bottom cross-shore baroclinic current. During periods of large temperature fluctuations, the majority of the variance was within the semi-diurnal band; however, the

  12. Comparison Between Surf and Multi-Shock Forest Fire High Explosive Burn Models

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, Nicholas Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-18

    PAGOSA1 has several different burn models used to model high explosive detonation. Two of these, Multi-Shock Forest Fire and Surf, are capable of modeling shock initiation. Accurately calculating shock initiation of a high explosive is important because it is a mechanism for detonation in many accident scenarios (i.e. fragment impact). Comparing the models to pop-plot data give confidence that the models are accurately calculating detonation or lack thereof. To compare the performance of these models, pop-plots2 were created from simulations where one two cm block of PBX 9502 collides with another block of PBX 9502.

  13. Mimicking a SURF1 allele reveals uncoupling of cytochrome c oxidase assembly from translational regulation in yeast.

    Science.gov (United States)

    Reinhold, Robert; Bareth, Bettina; Balleininger, Martina; Wissel, Mirjam; Rehling, Peter; Mick, David U

    2011-06-15

    Defects in mitochondrial energy metabolism lead to severe human disorders, mainly affecting tissues especially dependent on oxidative phosphorylation, such as muscle and brain. Leigh Syndrome describes a severe encephalomyopathy in infancy, frequently caused by mutations in SURF1. SURF1, termed Shy1 in Saccharomyces cerevisiae, is a conserved assembly factor for the terminal enzyme of the respiratory chain, cytochrome c oxidase. Although the molecular function of SURF1/Shy1 is still enigmatic, loss of function leads to cytochrome c oxidase deficiency and reduced expression of the central subunit Cox1 in yeast. Here, we provide insights into the molecular mechanisms leading to disease through missense mutations in codons of the most conserved amino acids in SURF1. Mutations affecting G(124) do not compromise import of the SURF1 precursor protein but lead to fast turnover of the mature protein within the mitochondria. Interestingly, an Y(274)D exchange neither affects stability nor localization of the protein. Instead, SURF1(Y274D) accumulates in a 200 kDa cytochrome c oxidase assembly intermediate. Using yeast as a model, we demonstrate that the corresponding Shy1(Y344D) is able to overcome the stage where cytochrome c oxidase assembly links to the feedback regulation of mitochondrial Cox1 expression. However, Shy1(Y344D) impairs the assembly at later steps, most apparent at low temperature and exhibits a dominant-negative phenotype upon overexpression. Thus, exchanging the conserved tyrosine (Y(344)) with aspartate in yeast uncouples translational regulation of Cox1 from cytochrome c oxidase assembly and provides evidence for the dual functionality of Shy1.

  14. Active depinning of bacterial droplets: the collective surfing of Bacillus subtilis

    Science.gov (United States)

    Hennes, Marc; Tailleur, Julien; Daerr, Adrian

    2016-11-01

    How systems are endowed with migration capacity is a fascinating question with implications ranging from the design of novel active systems to the control of microbial populations. Bacteria, which can be found in a variety of environments, have developed among the richest set of locomotion mechanisms both at the microscopic and collective levels. Here, we uncover experimentally a new mode of collective bacterial motility in humid environment through the depinning of bacterial droplets. While capillary forces are notoriously enormous at the bacterial scale, even capable of pinning water droplets of millimetric size on inclined surfaces, we show that bacteria are able to harness a variety of mechanisms to unpin contact lines, hence inducing a collective sliding of the colony. Contrary to flagella-dependent migration modes like swarming we show that this much faster colony surfing still occurs in mutant strains of Bacillus subtilis lacking flagella. The diversity of mechanisms involved in the active unpinning seen in our experiments suggests that collective surfing should be a generic mode of migration of microorganisms in humid environments. Bacttern Grant.

  15. Wave Transformation in a Multi-Bar Surf Zone: Case Study of Lubiatowo (Poland)

    Science.gov (United States)

    Lan, Yuan-Jyh; Hsu, Tai-Wen; Ostrowski, Rafał; Szmytkiewicz, Marek

    2016-06-01

    The paper presents results of field and theoretical investigations of wave transformation in the surf zone near the IBW PAN Coastal Research Station in Lubiatowo (Poland, the south Baltic Sea). The study site displays multi-bar cross-shore profiles that intensively dissipate wave energy, mostly induced by breaking. The main field data comprise wave heights and cross-shore bathymetric profiles.Wave transformation is modelled theoretically by two approaches, namely the IBW PAN phase-averaged wave transformation model and the approach based on the hydraulic jump model, developed by Hsu & Lai (2009) for hydrological situations encountered under the actual conditions of two field campaigns - in 1987 and 1996. Discrepancies between the measured data and the model results are discussed. In general, the model results are in good agreement with the in-situ observations. The comparison of the field data with the computational results concerns a part of the surf zone between about 5 m water depth and the first nearshore stable bar, where the depth amounts to ca. 1.2 m.

  16. Verification Test of the SURF and SURFplus Models in xRage: Part II

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-20

    The previous study used an underdriven detonation wave (steady ZND reaction zone profile followed by a scale invariant rarefaction wave) for PBX 9502 as a validation test of the implementation of the SURF and SURFplus models in the xRage code. Even with a fairly fine uniform mesh (12,800 cells for 100mm) the detonation wave profile had limited resolution due to the thin reaction zone width (0.18mm) for the fast SURF burn rate. Here we study the effect of finer resolution by comparing results of simulations with cell sizes of 8, 2 and 1 μm, which corresponds to 25, 100 and 200 points within the reaction zone. With finer resolution the lead shock pressure is closer to the von Neumann spike pressure, and there is less noise in the rarefaction wave due to fluctuations within the reaction zone. As a result the average error decreases. The pointwise error is still dominated by the smearing the pressure kink in the vicinity of the sonic point which occurs at the end of the reaction zone.

  17. Comparison of impact forces, accelerations and ankle range of motion in surfing-related landing tasks.

    Science.gov (United States)

    Lundgren, Lina E; Tran, Tai T; Nimphius, Sophia; Raymond, Ellen; Secomb, Josh L; Farley, Oliver R L; Newton, Robert U; Sheppard, Jeremy M

    2016-01-01

    This study aimed to describe the impact forces, accelerations and ankle range of motion in five different landing tasks that are used in training and testing for competitive surfing athletes, to assist coaches in the prescription of landing task progression and monitoring training load. Eleven competitive surfing athletes aged 24 ± 7 years participated, and inertial motion sensors were fixed to the anterior aspect of the feet, mid-tibial shafts, sacrum and eighth thoracic vertebrae on these athletes. Three tasks were performed landing on force plates and two tasks in a modified gymnastics set-up used for land-based aerial training. Peak landing force, resultant peak acceleration and front and rear side ankle dorsiflexion ranges of motion during landing were determined. The peak acceleration was approximately 50% higher when performing aerial training using a mini-trampoline and landing on a soft-density foam board, compared to a similar landing off a 50 cm box. Furthermore, the ankle ranges of motion during the gymnastic type landings were significantly lower than the other landing types (P ≤ 0.05 and P ≤ 0.001), for front and rear sides, respectively. Conclusively, increased task complexity and specificity of the sport increased the tibial peak acceleration, indicating greater training load.

  18. Mutations of SURF-1 in Leigh disease associated with cytochrome c oxidase deficiency.

    Science.gov (United States)

    Tiranti, V; Hoertnagel, K; Carrozzo, R; Galimberti, C; Munaro, M; Granatiero, M; Zelante, L; Gasparini, P; Marzella, R; Rocchi, M; Bayona-Bafaluy, M P; Enriquez, J A; Uziel, G; Bertini, E; Dionisi-Vici, C; Franco, B; Meitinger, T; Zeviani, M

    1998-12-01

    Leigh disease associated with cytochrome c oxidase deficiency (LD[COX-]) is one of the most common disorders of the mitochondrial respiratory chain, in infancy and childhood. No mutations in any of the genes encoding the COX-protein subunits have been identified in LD(COX-) patients. Using complementation assays based on the fusion of LD(COX-) cell lines with several rodent/human rho0 hybrids, we demonstrated that the COX phenotype was rescued by the presence of a normal human chromosome 9. Linkage analysis restricted the disease locus to the subtelomeric region of chromosome 9q, within the 7-cM interval between markers D9S1847 and D9S1826. Candidate genes within this region include SURF-1, the yeast homologue (SHY-1) of which encodes a mitochondrial protein necessary for the maintenance of COX activity and respiration. Sequence analysis of SURF-1 revealed mutations in numerous DNA samples from LD(COX-) patients, indicating that this gene is responsible for the major complementation group in this important mitochondrial disorder.

  19. New approach for measuring 3D space by using Advanced SURF Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Youm, Minkyo; Min, Byungil; Suh, Kyungsuk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Backgeun [Sungkyunkwan Univ., Suwon (Korea, Republic of)

    2013-05-15

    The nuclear disasters compared to natural disaster create a more extreme condition for analyzing and evaluating. In this paper, measuring 3D space and modeling was studied by simple pictures in case of small sand dune. The suggested method can be used for the acquisition of spatial information by robot at the disaster area. As a result, these data are helpful for identify the damaged part, degree of damage and determination of recovery sequences. In this study we are improving computer vision algorithm for 3-D geo spatial information measurement. And confirm by test. First, we can get noticeable improvement of 3-D geo spatial information result by SURF algorithm and photogrammetry surveying. Second, we can confirm not only decrease algorithm running time, but also increase matching points through epi polar line filtering. From the study, we are extracting 3-D model by open source algorithm and delete miss match point by filtering method. However on characteristic of SURF algorithm, it can't find match point if structure don't have strong feature. So we will need more study about find feature point if structure don't have strong feature.

  20. Preventing Shoulder-Surfing Attack with the Concept of Concealing the Password Objects’ Information

    Directory of Open Access Journals (Sweden)

    Peng Foong Ho

    2014-01-01

    Full Text Available Traditionally, picture-based password systems employ password objects (pictures/icons/symbols as input during an authentication session, thus making them vulnerable to “shoulder-surfing” attack because the visual interface by function is easily observed by others. Recent software-based approaches attempt to minimize this threat by requiring users to enter their passwords indirectly by performing certain mental tasks to derive the indirect password, thus concealing the user’s actual password. However, weaknesses in the positioning of distracter and password objects introduce usability and security issues. In this paper, a new method, which conceals information about the password objects as much as possible, is proposed. Besides concealing the password objects and the number of password objects, the proposed method allows both password and distracter objects to be used as the challenge set’s input. The correctly entered password appears to be random and can only be derived with the knowledge of the full set of password objects. Therefore, it would be difficult for a shoulder-surfing adversary to identify the user’s actual password. Simulation results indicate that the correct input object and its location are random for each challenge set, thus preventing frequency of occurrence analysis attack. User study results show that the proposed method is able to prevent shoulder-surfing attack.

  1. Verification test of the SURF and SURFplus models in xRage

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-18

    As a verification test of the SURF and SURFplus models in the xRage code we use a propagating underdriven detonation wave in 1-D. This is about the only test cases for which an accurate solution can be determined based on the theoretical structure of the solution. The solution consists of a steady ZND reaction zone profile joined with a scale invariant rarefaction or Taylor wave and followed by a constant state. The end of the reaction profile and the head of the rarefaction coincide with the sonic CJ state of the detonation wave. The constant state is required to match a rigid wall boundary condition. For a test case, we use PBX 9502 with the same EOS and burn rate as previously used to test the shock detector algorithm utilized by the SURF model. The detonation wave is propagated for 10 μs (slightly under 80mm). As expected, the pointwise errors are largest in the neighborhood of discontinuities; pressure discontinuity at the lead shock front and pressure derivative discontinuities at the head and tail of the rarefaction. As a quantitative measure of the overall accuracy, the L2 norm of the difference of the numerical pressure and the exact solution is used. Results are presented for simulations using both a uniform grid and an adaptive grid that refines the reaction zone.

  2. MOD_FreeSurf2D: a Surface Fluid Flow Simulation Model for Rivers, Streams, and Shallow Estuaries

    Science.gov (United States)

    Martin, N.; Gorelick, S. M.

    2003-12-01

    The MOD_FreeSurf2D, Modular Free Surface Flow in Two-Dimensions, computer model simulates free surface fluid flow in streams, rivers, and shallow estuaries under the assumptions of a well-mixed water column, a small water depth to width ratio, and a hydrostatic pressure distribution. The dependent variables in the model are free surface elevation, which provides total water depth, and fluid velocity. Primary advantages of MOD_FreeSurf2D relative to other two-dimensional models are a stable and computationally efficient numerical representation and a transparent representation of wetting and drying of the simulation domain. MOD_FreeSurf2D approximates the depth-averaged, shallow water equations with a finite volume, semi-implicit, semi-Lagrangian numerical representation similar to the TRIM method (Casulli, 1990; Casulli and Cheng, 1992; Casulli, 1999). The semi-implicit, semi-Lagrangian approach is computationally efficient because time steps can exceed the Courant-Friedrich-Lewy (CFL) stability criterion without significant accuracy degradation (Robert, 1982; Casulli, 1990). The rectangular, Arakawa C-grid, finite-volume layout allows flooding and drying in response to changing flow conditions without prior channel specification or closed boundary specification. Open boundary conditions available in MOD_FreeSurf2D are specified flux, specified total water depth, specified velocity, radiation free surface, and radiation velocity. MOD_FreeSurf2D requires initial topography, undisturbed water depth, and Manning's roughness coefficient. MOD_FreeSurf2D simulated results are shown to converge to the semi-empirical solution for a simple straight channel case. Two applications demonstrate the accuracy of MOD_FreeSurf2D. The first application is the evolution of water depth in the dambreak-style flume experiment of Bellos et al. (1992). In this case, MOD_FreeSurf2D accurately simulates the changing water depth in the flume during the experiment and models the wetting of

  3. Norman-based Isolated Data Systems allows users to surf the Internet with no traceable IP address

    CERN Multimedia

    2004-01-01

    "Patented by Norman-based Isolated Data Systems, John Doe is an anonymous proxy server that allows users to surf the Internet exactly as before, with one exception - they are identifiable only as John Doe, with no traceable IP address, which means no tracking, no identification and no profile building" ( 1/2 page)

  4. Morbus Coats

    Science.gov (United States)

    Förl, B.; Schmack, I.; Grossniklaus, H.E.; Rohrschneider, K.

    2010-01-01

    Der fortgeschrittene Morbus Coats stellt im Kleinkindalter eine der schwierigsten Differenzialdiagnosen zum Retinoblastom dar. Wir beschreiben die klinischen und histologischen Befunde zweier Jungen im Alter von 9 und 21 Monaten mit einseitiger Leukokorie. Trotz umfassender Diagnostik mittels Narkoseuntersuchung, MRT und Ultraschall konnte ein Retinoblastom nicht sicher ausgeschlossen werden, und es erfolgte eine Enukleation. Histologisch wurde die Diagnose eines Morbus Coats gesichert. Da eine differenzialdiagnostische Abgrenzung zwischen Morbus Coats und Retinoblastom schwierig sein kann, halten wir in zweifelhaften Fällen auch angesichts der eingeschränkten Visusprognose und potenzieller Sekundärkomplikationen beim fortgeschrittenen Morbus Coats eine Enukleation für indiziert. PMID:18299842

  5. Epidemlology of exercise-related transient abdominal pain at the Sydney City to Surf community run.

    Science.gov (United States)

    Morton, D P; Richards, D; Callister, R

    2005-06-01

    A questionnaire was administered to 848 participants (76% runners, 24% walkers) at the conclusion of the 14 km City to Surf community run in order to investigate their experience of exercise-related transient abdominal pain (ETAP). Twenty-seven percent of respondents reported experiencing ETAP during the event, with the condition reported more frequently (pnutritional content of the pre-event meal did not influence the experience of ETAP. Sufferers of ETAP were more likely to experience nausea (r = 0.12, p< 0.01) and report shoulder tip pain (r= 0.14, p< 0.01). The results indicate that ETAP is a commonly experienced problem and provide insights into the cause of the complaint.

  6. A VOF-based numerical model for breaking waves in surf zone

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    This paper introduces a numerical model for studying the evolution of a periodic wave train,shoaling, and breaking in surf zone. The model can solve the Reynolds averaged Navier-Stokes (RANS) equations for a mean flow, and the k-ε equations for turbulence kinetic energy k and turbulence dissipation rate ε. To track a free surface, the volume of fluid (VOF) function, satisfying the advection equation was introduced. In the numerical treatment, third-order upwind difference scheme was applied to the convection terms of the RANS equations in order to reduce the effect of numerical viscosity. The shoaling and breaking processes of a periodic wave train on gently sloping beaches were modeled. The computed wave heights of a sloping beach and the distribution of breaking wave pressure on a vertical wall were compared with laboratory data.

  7. 3D reconstruction of a human heart fascicle using SurfDriver

    Science.gov (United States)

    Rader, Robert J.; Phillips, Steven J.; LaFollette, Paul S., Jr.

    2000-06-01

    The Temple University Medical School has a sequence of over 400 serial sections of adult normal ventricular human heart tissue, cut at 25 micrometer thickness. We used a Zeiss Ultraphot with a 4x planapo objective and a Pixera digital camera to make a series of 45 sequential montages to use in the 3D reconstruction of a fascicle (muscle bundle). We wrote custom software to merge 4 smaller image fields from each section into one composite image. We used SurfDriver software, developed by Scott Lozanoff of the University of Hawaii and David Moody of the University of Alberta, for registration, object boundary identification, and 3D surface reconstruction. We used an Epson Stylus Color 900 printer to get photo-quality prints. We describe the challenge and our solution to the following problems: image acquisition and digitization, image merge, alignment and registration, boundary identification, 3D surface reconstruction, 3D visualization and orientation, snapshot, and photo-quality prints.

  8. Diarrhetic shellfish poisoning toxin esters in Danish blue mussels and surf clams

    DEFF Research Database (Denmark)

    Jørgensen, Kevin; Scanlon, Sine Hedegaard; Jensen, L.B.

    2005-01-01

    Until recently, little focus was given to the presence of diarrhetic shellfish poisoning ( DSP) toxin esters in seafood products. However, during the last few years, the occurrence of a high percentage of esters of the total amount of DSP toxins present in some seafood products has been observed....... Samples of Danish surf clams ( Spisola spp.) and blue mussels ( Mytilus edulis) from 1999 - 2004 were analysed by liquid chromatography coupled with tandem mass spectrometry ( LC/ MS/ MS) for the presence of DSP toxin esters. The samples contained only okadaic acid and esters of okadaic acid. The level...... of okadaic acid esters of the total okadaic acid equivalents ranged from 21 to 86%, mean 59%. The probability of a high percentage of okadaic acid esters seems to increase with higher amounts of total okadaic acid equivalents in the bivalves. The large prevalence of DSP toxin esters are of particular...

  9. Physical linkages between an offshore canyon and surf zone morphologic change

    Science.gov (United States)

    Hansen, Jeff E.; Raubenheimer, Britt; Elgar, Steve; List, Jeffrey H.; Lippmann, Thomas C.

    2017-04-01

    The causes of surf zone morphologic changes observed along a sandy beach onshore of a submarine canyon were investigated using field observations and a numerical model (Delft3D/SWAN). Numerically simulated morphologic changes using four different sediment transport formulae reproduce the temporal and spatial patterns of net cross-shore integrated (between 0 and 6.5 m water depths) accretion and erosion observed in a ˜300 m alongshore region, a few hundred meters from the canyon head. The observations and simulations indicate that the accretion or erosion results from converging or diverging alongshore currents driven primarily by breaking waves and alongshore pressure gradients. The location of convergence or divergence depends on the direction of the offshore waves that refract over the canyon, suggesting that bathymetric features on the inner shelf can have first-order effects on short-term nearshore morphologic change.

  10. Phase speed of electrostatic waves: The critical parameter for efficient electron surfing acceleration

    CERN Document Server

    Dieckmann, M E; Parviainen, M; Shukla, P K; Sircombe, N J

    2006-01-01

    Particle acceleration by means of non-linear plasma wave interactions is of great topical interest. Accordingly, in this paper we focus on the electron surfing process. Self-consistent kinetic simulations, using both relativistic Vlasov and PIC (Particle In Cell) approaches, show here that electrons can be accelerated to highly relativistic energies (up to 100 m_e c^2) if the phase speed of the electrostatic wave is mildly relativistic (0.6c to 0.9c for the magnetic field strengths considered). The acceleration is strong because of relativistic stabilisation of the nonlinearly saturated electrostatic wave, seen in both relativistic Vlasov and PIC simulations. An inverse power law momentum distribution can arise for the most strongly accelerated electrons. These results are of relevance to observed rapid changes in the radio synchrotron emission intensities from microquasars, gamma ray bursts and other astrophysical objects that require rapid acceleration mechanisms for electrons.

  11. Phase speed of electrostatic waves: the critical parameter for efficient electron surfing acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Dieckmann, M E [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Sircombe, N J [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Parviainen, M [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Shukla, P K [Institut fuer Theoretische Physik IV, Fakultaet fuer Physik und Astronomie, Ruhr-Universitaet Bochum, 44780 Bochum (Germany); Dendy, R O [UKAEA Culham Division, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB (United Kingdom); Physics Department, University of Warwick, Coventry CV4 7AL (United Kingdom)

    2006-04-15

    Particle acceleration by means of nonlinear plasma wave interactions is of great topical interest. Accordingly, in this paper we focus on the electron surfing process. Self-consistent kinetic simulations, using both relativistic Vlasov and particle-in-cell (PIC) approaches, show here that electrons can be accelerated to highly relativistic energies (up to 100m{sub e}c{sup 2}) if the phase speed of the electrostatic wave is mildly relativistic (0.6c to 0.9c for the magnetic field strengths considered). The acceleration is strong because of relativistic stabilization of the nonlinearly saturated electrostatic wave, seen in both relativistic Vlasov and PIC simulations. An inverse power law momentum distribution can arise for the most strongly accelerated electrons. These results are of relevance to observed rapid changes in the radio synchrotron emission intensities from microquasars, gamma ray bursts and other astrophysical objects that require rapid acceleration mechanisms for electrons.

  12. Numerical modelling of wind effects on breaking waves in the surf zone

    Science.gov (United States)

    Xie, Zhihua

    2017-10-01

    Wind effects on periodic breaking waves in the surf zone have been investigated in this study using a two-phase flow model. The model solves the Reynolds-averaged Navier-Stokes equations with the k - 𝜖 turbulence model simultaneously for the flows both in the air and water. Both spilling and plunging breakers over a 1:35 sloping beach have been studied under the influence of wind, with a focus during wave breaking. Detailed information of the distribution of wave amplitudes and mean water level, wave-height-to-water-depth ratio, the water surface profiles, velocity, vorticity, and turbulence fields have been presented and discussed. The inclusion of wind alters the air flow structure above water waves, increases the generation of vorticity, and affects the wave shoaling, breaking, overturning, and splash-up processes. Wind increases the water particle velocities and causes water waves to break earlier and seaward, which agrees with the previous experiment.

  13. Chemolithotrophy in the continental deep subsurface: Sanford Underground Research Facility (SURF, USA

    Directory of Open Access Journals (Sweden)

    Magdalena Rose Osburn

    2014-11-01

    Full Text Available The deep subsurface is an enormous repository of microbial life. However, the metabolic capabilities of these microorganisms and the degree to which they are dependent on surface processes are largely unknown. Due to the logistical difficulty of sampling and inherent heterogeneity, the microbial populations of the terrestrial subsurface are poorly characterized. In an effort to better understand the biogeochemistry of deep terrestrial habitats, we evaluate the energetic yield of chemolithotrophic metabolisms and microbial diversity in the Sanford Underground Research Facility (SURF in the former Homestake Gold Mine, SD, USA. Geochemical data, energetic modeling, and DNA sequencing were combined with principle component analysis to describe this deep (down to 8100 ft below surface, terrestrial environment. SURF provides access into an iron-rich Paleoproterozoic metasedimentary deposit that contains deeply circulating groundwater. Geochemical analyses of subsurface fluids reveal enormous geochemical diversity ranging widely in salinity, oxidation state (ORP 330 to -328 mV, and concentrations of redox sensitive species (e.g., Fe2+ from near 0 to 6.2 mg/L and ΣS2- from 7 to 2778 μg/L. As a direct result of this compositional buffet, Gibbs energy calculations reveal an abundance of energy for microorganisms from the oxidation of sulfur, iron, nitrogen, methane, and manganese. Pyrotag DNA sequencing reveals diverse communities of chemolithoautotrophs, thermophiles, aerobic and anaerobic heterotrophs, and numerous uncultivated clades. Extrapolated across the mine footprint, these data suggest a complex spatial mosaic of subsurface primary productivity that is in good agreement with predicted energy yields. Notably, we report Gibbs energy normalized both per mole of reaction and per kg fluid (energy density and find the later to be more consistent with observed physiologies and environmental conditions. Further application of this approach will

  14. Numerical modeling of surf zone dynamics under weakly plunging breakers with SPH method

    Science.gov (United States)

    Makris, Christos V.; Memos, Constantine D.; Krestenitis, Yannis N.

    2016-02-01

    The wave breaking of weak plungers over a relatively mild slope is investigated in this paper. Numerical modeling aspects are studied, concerning the propagation and breaking of shore-normal, nonlinear and regular waves. The two-dimensional (2-D) kinematics and dynamics (fluctuating flow features and large 2-D eddies) of the wave-induced flow on a vertical cross-section over the entire surf zone are simulated with the use of Smoothed Particle Hydrodynamics (SPH). The academic 'open source' code SPHysics v.2 is employed and the viscosity treatment is based on a Sub-Particle Scale (SPS) approach, similarly to the Large Eddy Simulations (LES) concept. Thorough analysis of the turbulent flow scales determines the necessary refinement of the spatial resolution. The initial particle discretization reaches down to the demarcation point between integral turbulence length scales and Taylor micro-scales. A convolution-type integration method is implemented for the transformation of scattered Lagrangian particle data to Eulerian values at fixed gauges. A heuristic technique of ensemble-averaging is used for the discrimination of the fluctuating flow components from coherent structures and ordered wave motion. Comparisons between numerical and experimental data give encouraging results for several wave features. The wave-induced mean flows are simulated plausibly, and even the 'streaming' effect near the bed is reproduced. The recurring vorticity patterns are derived, and coherent 2-D structures inside the surf zone are identified. Fourier spectral analysis of velocities reveals isotropy of 2-D fluctuating dynamics up to rather high frequencies in shear intensified regions. The simulated Reynolds stresses follow patterns that define the characteristic mechanism of wave breaking for weak plungers. Persisting discrepancies at the incipient breaking region confirm the need for fine, massively 'parallel' 3-D SPS-SPH simulations.

  15. Mapping bathymetry in an active surf zone with the WorldView2 multispectral satellite

    Science.gov (United States)

    Trimble, S. M.; Houser, C.; Brander, R.; Chirico, P.

    2015-12-01

    Rip currents are strong, narrow seaward flows of water that originate in the surf zones of many global beaches. They are related to hundreds of international drownings each year, but exact numbers are difficult to calculate due to logistical difficulties in obtaining accurate incident reports. Annual average rip current fatalities are estimated to be ~100, 53 and 21 in the United States (US), Costa Rica, and Australia respectively. Current warning systems (e.g. National Weather Service) do not account for fine resolution nearshore bathymetry because it is difficult to capture. The method shown here could provide frequent, high resolution maps of nearshore bathymetry at a scale required for improved rip prediction and warning. This study demonstrates a method for mapping bathymetry in the surf zone (20m deep and less), specifically within rip channels, because rips form at topographically low spots in the bathymetry as a result of feedback amongst waves, substrate, and antecedent bathymetry. The methods employ the Digital Globe WorldView2 (WV2) multispectral satellite and field measurements of depth to generate maps of the changing bathymetry at two embayed, rip-prone beaches: Playa Cocles, Puerto Viejo de Talamanca, Costa Rica, and Bondi Beach, Sydney, Australia. WV2 has a 1.1 day pass-over rate with 1.84m ground pixel resolution of 8 bands, including 'yellow' (585-625 nm) and 'coastal blue' (400-450 nm). The data is used to classify bottom type and to map depth to the return in multiple bands. The methodology is tested at each site for algorithm consistency between dates, and again for applicability between sites.

  16. Object Recognition System in Remote Controlled Weapon Station using SIFT and SURF Methods

    Directory of Open Access Journals (Sweden)

    Midriem Mirdanies

    2013-12-01

    Full Text Available Object recognition system using computer vision that is implemented on Remote Controlled Weapon Station (RCWS is discussed. This system will make it easier to identify and shoot targeted object automatically. Algorithm was created to recognize real time multiple objects using two methods i.e. Scale Invariant Feature Transform (SIFT and Speeded Up Robust Features (SURF combined with K-Nearest Neighbors (KNN and Random Sample Consensus (RANSAC for verification. The algorithm is designed to improve object detection to be more robust and to minimize the processing time required. Objects are registered on the system consisting of the armored personnel carrier, tanks, bus, sedan, big foot, and police jeep. In addition, object selection can use mouse to shoot another object that has not been registered on the system. Kinect™ is used to capture RGB images and to find the coordinates x, y, and z of the object. The programming language used is C with visual studio IDE 2010 and opencv libraries. Object recognition program is divided into three parts: 1 reading image from kinect™ and simulation results, 2 object recognition process, and 3 transfer of the object data to the ballistic computer. Communication between programs is performed using shared memory. The detected object data is sent to the ballistic computer via Local Area Network (LAN using winsock for ballistic calculation, and then the motor control system moves the direction of the weapon model to the desired object. The experimental results show that the SIFT method is more suitable because more accurate and faster than SURF with the average processing time to detect one object is 430.2 ms, two object is 618.4 ms, three objects is 682.4 ms, and four objects is 756.2 ms. Object recognition program is able to recognize multi-objects and the data of the identified object can be processed by the ballistic computer in realtime.

  17. Chinese Sign Language Recognition Method Based on Depth Image Information and SURF-BoW%基于深度信息和SURF-BoW的中国手语识别算法

    Institute of Scientific and Technical Information of China (English)

    杨全; 彭进业

    2014-01-01

    为实现视频中手语的准确识别,提出一种基于深度图连续自适应均值漂移( DI_CamShift)和加速强健特征词包( SURF-BoW)的中国手语识别算法.该算法将Kinect作为手语视频采集设备,在获取彩色视频的同时得到其深度信息.算法首先计算深度图像中手语手势的主轴方向角和质心位置,通过调整搜索窗口对手势准确跟踪;然后使用基于深度积分图像的OTSU算法分割手势并提取其加速强健特征( SURF),进而构建SURF-BoW作为手语特征并使用SVM识别.通过实验验证该算法在单个手语字母上的最好识别率为99.37%,平均识别率为96.24%.%To realize the accurate recognition of sign language in the video, an algorithm based on depth image CamShift( DI_CamShift) and speeded up robust features-bag of words ( SURF-BoW) is proposed. Kinect is used as the sign language video capture device to obtain both of the color video and depth image information of sign language gestures. Firstly, spindle direction angle and mass center position of the depth images are calculated and the search window is adjusted to track gesture. Next, an OTSU algorithm based on depth integral image is used for gesture segmentation, and the SURF features are extracted. Finally, SURF-BoW is built as the feature of sign language and SVM is utilized for recognition. The best recognition rate of single manual alphabet reaches 99 . 37%, and the average recognition rate is up to 96 . 24%.

  18. A randomised crossover comparison of manikin ventilation through Soft Seal®, i‐gel™ and AuraOnce™ supraglottic airway devices by surf lifeguards

    National Research Council Canada - National Science Library

    Adelborg, K; Al‐Mashhadi, R. H; Nielsen, L. H; Dalgas, C; Mortensen, M. B; Løfgren, B

    2014-01-01

    Forty surf lifeguards attempted to ventilate a manikin through one out of three supraglottic airways inserted in random order: the Portex ® Soft Seal ® ; the Intersurgical ® i‐gel™; and the Ambu ® AuraOnce...

  19. Verification Test of the SURF and SURFplus Models in xRage: Part III Affect of Mesh Alignment

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-15

    The previous studies used an underdriven detonation wave in 1-dimension (steady ZND reaction zone profile followed by a scale-invariant rarefaction wave) for PBX 9502 as a verification test of the implementation of the SURF and SURFplus models in the xRage code. Since the SURF rate is a function of the lead shock pressure, the question arises as to the effect on accuracy of variations in the detected shock pressure due to the alignment of the shock front with the mesh. To study the effect of mesh alignment we simulate a cylindrically diverging detonation wave using a planar 2-D mesh. The leading issue is the magnitude of azimuthal asymmetries in the numerical solution. The 2-D test case does not have an exact analytic solution. To quantify the accuracy, the 2-D solution along rays through the origin are compared to a highly resolved 1-D simulation in cylindrical geometry.

  20. Temporal and spatial patterns for surf zone bacteria before and after disinfection of the orange county sanitation district effluent

    Science.gov (United States)

    Robertson, G.L.; Noble, M.A.; Xu, J. P.; Rosenfeld, L.K.; McGee, C.D.

    2005-01-01

    Data from pre- and post-disinfection fecal indicator bacteria (FIB) samples from final effluent, an offshore ocean outfall, and surf zone stations off Huntington Beach, CA were compared. Analysis of the results from these data sets confirmed that the ocean outfall was not the FIB source responsible for the postings and closures of local beaches that have occurred each summer since 1999. While FIB counts in the final effluent and offshore showed several order of magnitude reductions after disinfection, there were no significant reductions at the nearby surf zone stations. Additionally, the FIB spectral patterns suggest different sources. The dominant fortnightly cycle suggested that the source was related to the wetting and draining of the land from large spring tide tidal excursions.

  1. Inner Surf/Swash Zone Morphodynamic Numerical Model Simulation of an Accreting Ridge during Low-Energy Wave Conditions

    Science.gov (United States)

    Song, Youn Kyung; Figlus, Jens; Chardón-Maldonado, Patricia; Puleo, Jack A.

    2017-04-01

    The inner surf/swash zone of a coastal beach is characterized as an intermittently wet and dry zone in the nearshore that often develops a variety of morphological features including intertidal bars and ridge-runnel (RR) systems. The cross-shore morphodynamic numerical model CSHORE is used to simulate the beach recovery observed during a field experiment carried out at South Bethany Beach, Delaware, a nourished, high-gradient meso-tidal sandy beach along the U. S. Coast. The field campaign was conducted from February 12 to February 25, 2014 to measure bed profile morphology change and sediment characteristics along with detailed hydrodynamic forcing parameters at six cross-shore stations, closely spaced over approximately 50 m in the inner surf and swash zone. On February 13, 2014 a Nor'easter eroded significant portions of the beach leading to formation of a pronounced RR system on the beach face that subsequently accreted in the recovery process after the storm. Bed profile changes, surf and swash velocity profiles, water free surface elevation and suspended sediment concentrations recorded during the recovery at the cross-shore measuring locations on the seaward face of the accreting ridge are compared with CSHORE simulation results. During post-storm recovery, CSHORE demonstrates shoreward migration of the ridge and slight accretion on the beach face by the end of the simulation period on February 25, 2014. This trend was also observed in the field, where accretion at the ridge crest was up to 1.0 m with respect to the post-storm profile. The CSHORE parameters critical to improving model performance in reproducing measured morphodynamics and hydrodynamics during the ridge accretion process are examined and calibrated. Initial results show promise in using this type of efficient, process-based model to reproduce morphological evolution and depth-averaged hydrodynamics as a result of the complex surf and swash zone dynamics associated with beach accretion and RR

  2. Análisis descriptivo de la dinámica del surf como práctica social

    Directory of Open Access Journals (Sweden)

    Oscar Naranjo Del Giudice

    2014-05-01

    Full Text Available En este trabajo de investigación, la cultura del surf es analizada desde la teoría de la práctica social (Giraldo y Halliday 2012, Shove et al., 2012. Para este fin, se estudiaron cada uno de los elementos que conforman la práctica y la forma como estos se interrelacionan como un todo. Las ofertas de valor construidas pueden ser entendidas como constelaciones (Nornmann y Ramírez 1993 de recursos que mediante su integración contextual forman productos y servicios. Los datos fueron recolectados en un año mediante registros de campo, narrativas, registro fotográfico y observación participante. La información fue recolectada por parte de uno de los investigadores que pertenece a la comunidad de surf durante cuatro meses de manera permanentemente y durante ocho meses de manera intermitentes. Se encontró cómo la teoría de la práctica social puede explicar la dinámica del surf y como el surf puede agregar a la teoría de la práctica social un nuevo factor: la comunidad. La relación de interdependencia entre los aspectos pertenecientes a las prácticas sociales según (Giraldo y Halliday 2012, Shove et al., 2012, comprueba que el desarrollo de cada uno de ellos, afecta toda la práctica, lo cual requiere estudios profundos en cada segmento con el fin de crear, mejorar o destruir cualquier práctica social.

  3. Modeling aerosol surface chemistry and gas-particle interaction kinetics with K2-SURF: PAH oxidation

    Science.gov (United States)

    Shiraiwa, M.; Garland, R.; Pöschl, U.

    2009-04-01

    Atmospheric aerosols are ubiquitous in the atmosphere. They have the ability to impact cloud properties, radiative balance and provide surfaces for heterogeneous reactions. The uptake of gaseous species on aerosol surfaces impacts both the aerosol particles and the atmospheric budget of trace gases. These subsequent changes to the aerosol can in turn impact the aerosol chemical and physical properties. However, this uptake, as well as the impact on the aerosol, is not fully understood. This uncertainty is due not only to limited measurement data, but also a dearth of comprehensive and applicable modeling formalizations used for the analysis, interpretation and description of these heterogeneous processes. Without a common model framework, comparing and extrapolating experimental data is difficult. In this study, a novel kinetic surface model (K2-SURF) [Ammann & Pöschl, 2007; Pöschl et al., 2007] was used to describe the oxidation of a variety of polycyclic aromatic hydrocarbons (PAHs). Integrated into this consistent and universally applicable kinetic and thermodynamic process model are the concepts, terminologies and mathematical formalizations essential to the description of atmospherically relevant physicochemical processes involving organic and mixed organic-inorganic aerosols. Within this process model framework, a detailed master mechanism, simplified mechanism and parameterizations of atmospheric aerosol chemistry are being developed and integrated in analogy to existing mechanisms and parameterizations of atmospheric gas-phase chemistry. One of the key aspects to this model is the defining of a clear distinction between various layers of the particle and surrounding gas phase. The processes occurring at each layer can be fully described using known fluxes and kinetic parameters. Using this system there is a clear separation of gas phase, gas-surface and surface bulk transport and reactions. The partitioning of compounds can be calculated using the flux

  4. Butyltins, trace metals and morphological variables in surf scoter (Melanitta perspicillata) wintering on the south coast of British Columbia, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, J.E. [Environment Canada, Science and Technology Branch, Pacific Wildlife Research Centre, 5421 Robertson Rd., RR1 Delta, British Columbia V4K 3N2 (Canada)]. E-mail: john.elliott@ec.gc.ca; Harris, M.L. [Lorax Environmental, 136 St. Catherine' s Rd, RR3 Bonshaw, Prince Edward Island C0A 1C0 (Canada); Wilson, L.K. [Environment Canada, Canadian Wildlife Service, 5421 Robertson Rd, RR1 Delta, British Columbia V4K 3N2 (Canada); Smith, B.D. [Environment Canada, Science and Technology Branch, Pacific Wildlife Research Centre, 5421 Robertson Rd., RR1 Delta, British Columbia V4K 3N2 (Canada); Batchelor, S.P. [National Water Research Institute, Environment Canada, 867 Lakeshore Rd., PO Box 5050, Burlington, Ontario L7R 4A6 (Canada); Maguire, J. [National Water Research Institute, Environment Canada, 867 Lakeshore Rd., PO Box 5050, Burlington, Ontario L7R 4A6 (Canada)

    2007-09-15

    From 1998 to 2001 we examined spatial and temporal variation in uptake of contaminants by surf scoters (Melanitta perspicillata) in the Georgia Basin region of the Pacific coast of Canada. Samples were collected during late fall and early spring at industrialized and reference locations, carcasses examined, and tissues collected for histology, biomarkers, and contaminant analyses. Scoters from both Vancouver and Victoria harbours had significantly higher hepatic concentrations of {sigma}butyltins than birds from a reference site. In adult male surf scoters, hepatic {sigma}butyltins increased over the winter at two sites (p = 0.02, n = 26), while mercury increased (p = 0.03, n = 15) and selenium decreased at one site (p = 0.001, n = 15). Body condition decreased over the winter at both the treatment site, Howe Sound (p < 0.0001, n = 12), and the reference site, Baynes Sound (p = 0.02, n = 15). Multiple regression analysis using Akaike's Information Criteria (AIC{sub C}) showed an association between hepatic butyltin concentrations and overall body condition (p = 0.06, r = - 0.237). - Hepatic butyltin concentrations in surf scoters increased significantly over a winter in the Strait of Georgia, and correlated negatively with body condition.

  5. A CFD Model for Wave Transformation and Breaking in the Surf Zone

    Science.gov (United States)

    Chopakatla, S. C.; Lippmann, T. C.; Richardson, J. E.; Thornton, E. B.; Holman, R. A.

    2002-12-01

    Wind-generated surface gravity waves are the major driving force for nearshore circulation and sediment transport. As waves shoal in shallow coastal waters, spectra evolve strongly owing to refraction, nonlinear energy transfers, and dissipation caused by wave breaking and bottom friction. Although considerable progress has been made in modeling wave propagation over complex bottom topography, the dissipation mechanisms are still poorly understood. As a consequence, wave transformation models for the surf zone use crude descriptions of the wave breaking process based on simple saturation criteria or empirical probability distributions that do not always work well for the range of bathymetric and wave conditions commonly observed in nature. In this report, we will discuss the results of studies made with the commercially available Computational Fluid Dynamics (CFD) software system known as FLOW-3D (Flow Science, Inc., Sante Fe, NM). FLOW-3D is designed to solve transient, free surface flow problems based on the solution of the Navier-Stokes equations in three-dimensions. As part of FLOW-3D's formulation, the dissipation of energy is determined by use of coupled turbulence closure schemes (e.g., closure schemes based on the solution of turbulent kinetic energy transport equations). In this study, fine scale pressures and velocities are computed over a two-dimensional beach profile measured during the 1990 Delilah experiment. The model is driven by observed wave spectra obtained in 8 meter water depths, and results compared with a cross-shore array of pressure sensors and current meters spanning the width of the surf zone. In the calculations, wave breaking is a natural consequence of the fluid dynamics and does not require the use of empirical formulations, or breaking criteria. The spatial and temporal variability in the wave breaking locations will be compared with video observations obtained during the experiment. Good comparison between modeled and observed wave

  6. QSAR Study and VolSurf Characterization of Human Intestinal Absorption of Druge

    Institute of Scientific and Technical Information of China (English)

    胡桂香; 商志才; 等

    2003-01-01

    The prediction of human intestinal absorption is a major goal in the design,optimization,and selection of candidates for the develoment of oral drugs.In this study,a computerized method(VolSurf with GRID) was used as a novel tool for predicting human intestinal absorption of test compound,and for determining the critical molecular properties needed for human intestinal absorption.The tested molecules consisted of 20 diverse drug-like compounds.Partial least squares(PLS) discriminant analysis was used to correlate the experimental data with the theoretical molecular properties of human intestinal absorption.A good correlation(r2=0.95,q2=0.86) between the molecular modeling results and the experimental data demonstrated that human intestinal absorption could be predicted from the three-dimensional(3D) molecular structure of a compound .Favorable structureal properties identified for the potent intestinal absorption of drugs included strong imbalance between the center of mass of a molecule and the barycentre of its hydrophilic and hydrophobic regions and a definitive hydrophobic region as well as less hydrogen bonding donors and acceptors in the molecule.

  7. Hybrid Video Stabilization for Mobile Vehicle Detection on SURF in Aerial Surveillance

    Directory of Open Access Journals (Sweden)

    Gao Chunxian

    2015-01-01

    Full Text Available Detection of moving vehicles in aerial video sequences is of great importance with many promising applications in surveillance, intelligence transportation, or public service applications such as emergency evacuation and policy security. However, vehicle detection is a challenging task due to global camera motion, low resolution of vehicles, and low contrast between vehicles and background. In this paper, we present a hybrid method to efficiently detect moving vehicle in aerial videos. Firstly, local feature extraction and matching were performed to estimate the global motion. It was demonstrated that the Speeded Up Robust Feature (SURF key points were more suitable for the stabilization task. Then, a list of dynamic pixels was obtained and grouped for different moving vehicles by comparing the different optical flow normal. To enhance the precision of detection, some preprocessing methods were applied to the surveillance system, such as road extraction and other features. A quantitative evaluation on real video sequences indicated that the proposed method improved the detection performance significantly.

  8. Temporal and spatial variability of fecal indicator bacteria in the surf zone off Huntington Beach, CA

    Science.gov (United States)

    Rosenfeld, L.K.; McGee, C.D.; Robertson, G.L.; Noble, M.A.; Jones, B.H.

    2006-01-01

    Fecal indicator bacteria concentrations measured in the surf zone off Huntington Beach, CA from July 1998-December 2001 were analyzed with respect to their spatial patterns along 23 km of beach, and temporal variability on time scales from hourly to fortnightly. The majority of samples had bacterial concentrations less than, or equal to, the minimum detection limit, but a small percentage exceeded the California recreational water standards. Areas where coliform bacteria exceeded standards were more prevalent north of the Santa Ana River, whereas enterococci exceedances covered a broad area both north and south of the river. Higher concentrations of bacteria were associated with spring tides. No temporal correspondence was found between these bacterial events and either the timing of cold water pulses near shore due to internal tides, or the presence of southerly swell in the surface wave field. All three fecal indicator bacteria exhibited a diel cycle, but enterococci rebounded to high nighttime values almost as soon as the sun went down, whereas coliform levels were highest near the nighttime low tide, which was also the lower low tide. ?? 2006 Elsevier Ltd. All rights reserved.

  9. Enzyme as catalytic wheel powered by a Markovian engine: conformational coupling and barrier surfing models

    Science.gov (United States)

    Tsong, Tian Yow; Chang, Cheng-Hung

    2005-05-01

    We examine a typical Michaelis-Menten Enzyme (MME) and redress it to form a transducer of free energy, and electric, acoustic, or other types of energy. This amendment and extension is necessary in lieu of recent experiments in which enzymes are shown to perform pump, motor, and locomotion functions resembling their macroscopic counterparts. Classical textbook depicts enzyme, or an MME, as biocatalyst which can enhance the rate of a chemical reaction by lowering the activation barrier but cannot shift the thermodynamic equilibrium of the biochemical reaction. An energy transducer, on the other hand, must also be able to harvest, store, or divert energy and in doing so alter the chemical equilibrium, change the energy form, fuel an energy consuming process, or perform all these functions stepwise in one catalytic turnover. The catalytic wheel presented in this communication is both a catalyst and an energy transducer and can perform all these tasks with ease. A Conformational Coupling Model for the rotary motors and a Barrier Surfing Model for the track-guided stepping motors and transporters, are presented and compared. It is shown that the core engine of the catalytic wheel, or a Brownian motor, is a Markovian engine. It remains to be seen if this core engine is the basic mechanism for a wide variety of bio-molecular energy transducers, as well as certain other dynamic systems, for example, the Parrondo's Games.

  10. Surf Zone Hydrodynamics and its Utilization in Biotechnical Stabilization of Water Reservoir Banks

    Directory of Open Access Journals (Sweden)

    Petr Pelikán

    2014-01-01

    Full Text Available The water reservoir banks are eroded mainly by two factors. The first one is wave action (i.e. wave abrasion affecting the bank in direction from the reservoir. The second one is the influence of water flowing downward over the bank surface in direction from land into the reservoir (e.g. rainfall. The determination of regular altitudinal emplacement of proper designed particular biotechnical stabilization elements is the most important factor on which the right functionality of whole construction depends. Surf zone hydrodynamics solves the wave and water level changes inside the region extending from the wave breaking point to the limit of wave up-rush. The paper is focused on the utilization of piece of knowledge from a part of sea coast hydrodynamics and new approach in its application in the conditions of inland water bodies when designing the biotechnical stabilization elements along the shorelines. The “reinforced grass carpets” as a type of biotechnical method of bank stabilization are presented in the paper; whether the growth of grass root system is dependent on presence or absence of geomats in the soil structure and proceeding of their establishment on the shorelines.

  11. 3D-QSAR studies on UDP-glucuronosyltransferase 2B7 substrates using the pharmacophore and VolSurf approaches.

    Science.gov (United States)

    Ako, Roland; Dong, Dong; Wu, Baojian

    2012-09-01

    UDP-glucuronosyltransferase 2B7 (UGT2B7) is an important enzyme responsible for clearance of many drugs. Here, we report two 3D quantitative structure-activity relationship (QSAR) models for UGT2B7 using the pharmacophore and VolSurf approach, respectively. The dataset included 53 structurally diverse UGT2B7 substrates, 36 of which were used for the training set and 17 of which for the external test set. Pharmacophore-based 3D-QSAR model (or hypothesis) was developed using the Discovery Studio program. A user-defined "glucuronidation site" feature was forcefully included in a pharmacophore hypothesis. VolSurf-based 3D-QSAR model was generated using the VolSurf program. This involves calculation of VolSurf descriptors, variable selection with the FFD algorithm, and partial least squares (PLS) analyses. The best pharmacophore model (r(2) = 0.736) consists of one glucuronidation site, one hydrogen bond acceptor, and three hydrophobic regions. Using this model, K(m) values for 14 of 17 test substrates were predicted within one log unit. The yielded VolSurf (PLS) model with two components shows statistical significance in both fitting and internal predicting (r(2) = 0.866, q(2) = 0.728). Further, the K(m) values for all test substrates were predicted within one log unit. In addition, the VolSurf model reveals an overlay of chemical features influencing the enzyme-substrate binding. Those include molecular size and shape, integy moments, capacity factors, best volumes of DRY probe, H-bonding, and log P. In conclusion, the pharmacophore and VolSurf approaches are successfully utilized to establish predictive models for UGT2B7. The derived models should be an efficient tool for high throughput prediction of UGT2B7 metabolism.

  12. Protective Coatings

    Science.gov (United States)

    1980-01-01

    General Magnaplate Corporation's pharmaceutical machine is used in the industry for high speed pressing of pills and capsules. Machine is automatic system for molding glycerine suppositories. These machines are typical of many types of drug production and packaging equipment whose metal parts are treated with space spinoff coatings that promote general machine efficiency and contribute to compliance with stringent federal sanitation codes for pharmaceutical manufacture. Collectively known as "synergistic" coatings, these dry lubricants are bonded to a variety of metals to form an extremely hard slippery surface with long lasting self lubrication. The coatings offer multiple advantages; they cannot chip, peel or be rubbed off. They protect machine parts from corrosion and wear longer, lowering maintenance cost and reduce undesired heat caused by power-robbing friction.

  13. Graphene Coatings

    DEFF Research Database (Denmark)

    Stoot, Adam Carsten; Camilli, Luca; Bøggild, Peter

    2014-01-01

    Owing to its remarkable electrical and mechanical properties, graphene has been attracting tremendous interest in materials science. In particular, its chemical stability and impermeability make it a promising protective membrane. However, recent investigations reveal that single layer graphene...... cannot be used as a barrier in the long run, due to galvanic corrosion phenomena arising when oxygen or water penetrate through graphene cracks or domain boundaries. Here, we overcome this issue by using a multilayered (ML) graphene coating. Our lab- as well as industrial-scale tests demonstrate that ML...... that graphene can still be a relevant candidate for thin coatings....

  14. The Design and Implementation of a Prototype Surf-Zone Robot for Waterborne Operations

    Science.gov (United States)

    2015-12-01

    developed and tested for mobility in a beachfront environment. Three wheel- designs were tested during fixed pattern tests on grass, concrete and sand. The...part of the internal electronics. To include the connectors in the design, the waterproof cylinder end caps are modified using CNC milling as shown... rubber coating (Plasti-Dip) and a liquid repellent treatment (Rust-Oleum Never Wet–multisurface). An FDM sparse part T5 was coated as depicted in Figure

  15. Prediction and assimilation of surf-zone processes using a Bayesian network: Part II: Inverse models

    Science.gov (United States)

    Plant, Nathaniel G.; Holland, K. Todd

    2011-01-01

    A Bayesian network model has been developed to simulate a relatively simple problem of wave propagation in the surf zone (detailed in Part I). Here, we demonstrate that this Bayesian model can provide both inverse modeling and data-assimilation solutions for predicting offshore wave heights and depth estimates given limited wave-height and depth information from an onshore location. The inverse method is extended to allow data assimilation using observational inputs that are not compatible with deterministic solutions of the problem. These inputs include sand bar positions (instead of bathymetry) and estimates of the intensity of wave breaking (instead of wave-height observations). Our results indicate that wave breaking information is essential to reduce prediction errors. In many practical situations, this information could be provided from a shore-based observer or from remote-sensing systems. We show that various combinations of the assimilated inputs significantly reduce the uncertainty in the estimates of water depths and wave heights in the model domain. Application of the Bayesian network model to new field data demonstrated significant predictive skill (R2 = 0.7) for the inverse estimate of a month-long time series of offshore wave heights. The Bayesian inverse results include uncertainty estimates that were shown to be most accurate when given uncertainty in the inputs (e.g., depth and tuning parameters). Furthermore, the inverse modeling was extended to directly estimate tuning parameters associated with the underlying wave-process model. The inverse estimates of the model parameters not only showed an offshore wave height dependence consistent with results of previous studies but the uncertainty estimates of the tuning parameters also explain previously reported variations in the model parameters.

  16. Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

    Science.gov (United States)

    Huang, Meng; Gao, Zhiqiu; Miao, Shiguang; Chen, Fei; LeMone, Margaret A.; Li, Ju; Hu, Fei; Wang, Linlin

    2016-09-01

    Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance (σ _w^2 >0.1 m2s^{-2}) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which σ _w^2 decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from ≈ 270 to ≈ 1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.

  17. Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

    Science.gov (United States)

    Huang, Meng; Gao, Zhiqiu; Miao, Shiguang; Chen, Fei; LeMone, Margaret A.; Li, Ju; Hu, Fei; Wang, Linlin

    2017-03-01

    Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance (σ _w^2 >0.1 m2s^{-2}) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which σ _w^2 decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from ≈ 270 to ≈ 1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.

  18. Technológia elektronického podpisu

    OpenAIRE

    2004-01-01

    An electronic signature uses a hash of message and an asymetrical algorithm of encryption for its generation. During verification of message on receiver side the hash of original message must be identical with the hash of received message. Electronic message is secured autentization of author and integrity of transmission date. By electronic signature it is possible to sign everything what is in digital form.

  19. Size spectra of bubbles in the foam patches and of sea salt nuclei over the surf zone

    OpenAIRE

    Podzimek, Josef

    2011-01-01

    The size distribution of bubbles in the foam patches and the size distribution of giant chloridenuclei over the surf zone both follow the Nukiyama-Tanassava size distribution function. Theslope of the size distribution curve for bubbles depends, however, on the residence time of thefoam patch at the ocean surface. The best fit of the sea salt nuclei size distribution curve wasfound for s = 0.333 in the Nukiyama-Tanassava distribution.DOI: 10.1111/j.1600-0889.1984.tb00241.x

  20. Diseño de un programa de Surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años

    OpenAIRE

    Iriarte Gomara, Pablo

    2015-01-01

    El objetivo de este trabajo es diseñar un programa de surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años. El Síndrome de Down se define como una discapacidad intelectual causada por una alteración en el par de cromosomas 21 (OMS, 2011). Resulta de especial relevancia el tratamiento de dicha discapacidad de manera no farmacológica, destacando la actividad física, en este caso el surf, como elemento inclusivo a nivel físico, psicológico y social. Se analizan distintos pro...

  1. On the resonance hypothesis of storm surge and surf beat run-up

    Science.gov (United States)

    Postacioglu, Nazmi; Sinan Özeren, M.; Canlı, Umut

    2017-06-01

    Resonance has recently been proposed as the fundamental underlying mechanism that shapes the amplification in coastal run-up for storm surges and surf beats, which are long-wavelength disturbances created by fluid velocity differences between the wave groups and the regions outside the wave groups. It is without doubt that the resonance plays a role in run-up phenomena of various kinds; however, we think that the extent to which it plays its role has not been completely understood. For incident waves, which we assume to be linear, the best approach to investigate the role played by the resonance would be to calculate the normal modes by taking radiation damping into account and then testing how those modes are excited by the incident waves. Such modes diverge offshore, but they can still be used to calculate the run-up. There are a small number of previous works that attempt to calculate the resonant frequencies, but they do not relate the amplitudes of the normal modes to those of the incident wave. This is because, by not including radiation damping, they automatically induce a resonance that leads to infinite amplitudes, thus preventing them from predicting the exact contribution of the resonance to coastal run-up. In this study we consider two different coastal geometries: an infinitely wide beach with a constant slope connecting to a flat-bottomed deep ocean and a bay with sloping bottom, again, connected to a deep ocean. For the fully 1-D problem we find significant resonance if the bathymetric discontinuity is large.The linearisation of the seaward boundary condition leads to slightly smaller run-ups. For the 2-D ocean case the analysis shows that the wave confinement is very effective when the bay is narrow. The bay aspect ratio is the determining factor for the radiation damping. One reason why we include a bathymetric discontinuity is to mimic some natural settings where bays and gulfs may lead to abrupt depth gradients such as the Tokyo Bay. The other

  2. Interacting effects of latitude, mass, age, and sex on winter survival of Surf Scoters (Melanitta perspicillata): Implications for differential migration

    Science.gov (United States)

    Uher-Koch, Brian D.; Esler, Daniel N.; Iverson, Samuel A.; Ward, David; Boyd, Sean; Kirk, Molly; Lewis, Tyler L.; VanStratt, Corey S.; Brodhead, Katherine M.; Hupp, Jerry; Schmutz, Joel A.

    2016-01-01

    We quantified variation in winter survival of Surf Scoters (Melanitta perspicillata (L., 1758)) across nearly 30° of latitude on the Pacific coast of North America to evaluate potential effects on winter distributions, including observed differential distributions of age and sex classes. We monitored fates of 297 radio-marked Surf Scoters at three study sites: (1) near the northern periphery of their wintering range in southeast Alaska, USA, (2) the range core in British Columbia, Canada, and (3) the southern periphery in Baja California, Mexico. We detected 34 mortalities and determined that survival averaged lower at the range peripheries than in the range core, was lower during mid-winter than during late winter at all sites, and was positively correlated with body mass within locations. Although neither age nor sex class had direct effects, mass effects led to differential survival patterns among classes. When simultaneously incorporating these interacting influences, adult males of mean mass for their location had highest survival at the northern range periphery in Alaska, whereas adult females and juveniles had higher survival at the range core and the southern periphery. Our observations help to explain patterns of differential migration and distribution reported for this species and highlight seasonal periods (mid-winter) and locations (range peripheries) of elevated levels of mortality for demographically important age–sex classes (adult females).

  3. A Comprehensive Motion Estimation Technique for the Improvement of EIS Methods Based on the SURF Algorithm and Kalman Filter.

    Science.gov (United States)

    Cheng, Xuemin; Hao, Qun; Xie, Mengdi

    2016-04-07

    Video stabilization is an important technology for removing undesired motion in videos. This paper presents a comprehensive motion estimation method for electronic image stabilization techniques, integrating the speeded up robust features (SURF) algorithm, modified random sample consensus (RANSAC), and the Kalman filter, and also taking camera scaling and conventional camera translation and rotation into full consideration. Using SURF in sub-pixel space, feature points were located and then matched. The false matched points were removed by modified RANSAC. Global motion was estimated by using the feature points and modified cascading parameters, which reduced the accumulated errors in a series of frames and improved the peak signal to noise ratio (PSNR) by 8.2 dB. A specific Kalman filter model was established by considering the movement and scaling of scenes. Finally, video stabilization was achieved with filtered motion parameters using the modified adjacent frame compensation. The experimental results proved that the target images were stabilized even when the vibrating amplitudes of the video become increasingly large.

  4. Relationship between high-frequency sediment-level oscillations in the swash zone and inner surf zone wave characteristics under calm wave conditions

    Directory of Open Access Journals (Sweden)

    Li Zhiqiang

    2016-01-01

    Full Text Available Swash zone topography rapidly responds to the surf zone waves. Understanding how sandy beaches respond to wave action is critical for beach erosion research, and plays a critical role in the design and maintenance of shore protection structures. The main objectives of this study were to detect the relationship between high-frequency beachface oscillations and surf zone wave characteristics under plunging breakers by using Canonical Correlation Analysis (CCA. The study site is located in Houjiangwan Bay, eastern Guangdong. Topography data were sampled at 6 min intervals. The wave characteristic parameters were calculated by spectrum method. During the field work, the beach showed a reflective state and plunging breakers controlled the surf zone. The beach cusp topography was destructed gradually. The analysis provides 4 canonical correlation processes between the beachface variations and surf zone waves, which explained 95.28% of the overall variation in the data. The result shows wave steepness, the irregularity factor and spectral broadness factor had strong impacts on the topography. The wave steepness was the most important factor for beach profile variations. The results of the present study indicate that data-driven statistical analysis, such as CCA, is useful for analyzing profile response to waves if there is strong correlation between the two variables (beach profiles and wave.

  5. On the use of the fictitious wave steepness and related surf-similarity parameters in methods that describe the hydraulic and structural response to waves

    NARCIS (Netherlands)

    Heineke, D.; Verhagen, H.J.

    2007-01-01

    To assess the hydraulic performance of coastal structures - viz. wave run-up, overtopping and reflection - and to evaluate the stability of the armour layers, use is made of the dimensionless surf similarity parameter, as introduced by Battjes (1974). The front side slope of the structure and the wa

  6. On the use of the fictitious wave steepness and related surf-similarity parameters in methods that describe the hydraulic and structural response to waves

    NARCIS (Netherlands)

    Heineke, D.; Verhagen, H.J.

    2007-01-01

    To assess the hydraulic performance of coastal structures - viz. wave run-up, overtopping and reflection - and to evaluate the stability of the armour layers, use is made of the dimensionless surf similarity parameter, as introduced by Battjes (1974). The front side slope of the structure and the

  7. Corrosion resistant coating

    Science.gov (United States)

    Wrobleski, Debra A.; Benicewicz, Brian C.; Thompson, Karen G.; Bryan, Coleman J.

    1997-01-01

    A method of protecting a metal substrate from corrosion including coating a metal substrate of, e.g., steel, iron or aluminum, with a conductive polymer layer of, e.g., polyaniline, coating upon said metal substrate, and coating the conductive polymer-coated metal substrate with a layer of a topcoat upon the conductive polymer coating layer, is provided, together with the resultant coated article from said method.

  8. Kinetic double-layer model of aerosol surface chemistry and gas-particle interactions (K2-SURF): Degradation of polycyclic aromatic hydrocarbons exposed to O3, NO2, H2O, OH and NO3

    Science.gov (United States)

    Shiraiwa, Manabu; Garland, Rebecca M.; Pöschl, Ulrich

    2010-05-01

    We present a kinetic double-layer surface model (K2-SURF) that describes the degradation of polycyclic aromatic hydrocarbons (PAHs) on aerosol particles exposed to ozone, nitrogen dioxide, water vapor, hydroxyl and nitrate radicals [1]. The model is based on multiple experimental studies of PAH degradation and on the Pöschl-Rudich-Ammann (PRA) framework [2] for aerosol and cloud surface chemistry and gas-particle interactions. For a wide range of substrates, including solid and liquid organic and inorganic substances (soot, silica, sodium chloride, octanol/decanol, organic acids, etc.), the concentration- and time-dependence of the heterogeneous reaction between PAHs and O3 can be efficiently described with a Langmuir-Hinshelwood-type mechanism. Depending on the substrate material, the Langmuir adsorption constants for O3 vary over three orders of magnitude, and the second-order rate coefficients for the surface layer reaction of O3 with different PAH vary over two orders of magnitude. The available data indicate that the Langmuir adsorption constants for NO2 are similar to those of O3, while those of H2O are several orders of magnitude smaller. The desorption lifetimes and adsorption enthalpies suggest chemisorption of NO2 and O3 and physisorption of H2O. Note, however, that the exact reaction mechanisms, rate limiting steps and possible intermediates still remain to be resolved (e.g., surface diffusion and formation of O atoms or O3- ions at the surface). The K2-SURF model enables the calculation of ozone uptake coefficients, γO3, and of PAH concentrations in the quasi-static particle surface layer. Competitive adsorption and chemical transformation of the surface (aging) lead to a strong non-linear dependence of γO3 on time and gas phase composition, with different characteristics under dilute atmospheric and concentrated laboratory conditions. Under typical ambient conditions, γO3 of PAH-coated aerosol particles are expected to be in the range of 10-6 - 10

  9. Coatings and Corrosion Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The mission of the Coatings and Corrosion Laboratory is to develop and analyze the effectiveness of innovative coatings test procedures while evaluating the...

  10. Numerical study of pollutant movement in waves and wave-induced long-shore currents in surf zone

    Institute of Scientific and Technical Information of China (English)

    TANG Jun; SHEN Yongming; QIU Dahong

    2008-01-01

    Water waves,wave-induced long-shore currents and movement of pollutants in waves and currents have been numerically studied based on the hyperbolic mild-slope equation,the shallow water equation,as well as the pollutant movement equation,and the nu- merical results have also been validated by experimental data.It is shown that the long-shore current velocity and wave set-up in- crease with the increasing incident wave amplitude and slope steepness of the shore plane;the wave set-up increases with the in- creasing incident wave period;and the pollutant morement proceeds more quiekly with the increasing incident wave amplitude and slope steepness of the shore palane.In surf zones,the long-shore currents induced by the inclined incident waves have effectively affected the pollutant movement.

  11. Recomendações de Gestão dos Recifes Artificiais para a Prática do Surfe

    Directory of Open Access Journals (Sweden)

    Marco Antonio Moraes Ocke

    2016-05-01

    Full Text Available Os recifes artificiais são estruturas afundadas em ambiente marinho a fim de oferecer múltiplos usos e beneficiar um maior número de usuários. Entretanto, sua capacidade de propiciar melhores condições de surfe tem sido a principal característica atrativa para experiências já realizadas em alguns países do mundo. Neste contexto, esta pesquisa tem o objetivo de apresentar um conjunto de recomendações que possam contribuir com gestores públicos e privados que planejam incluir a implantação de recifes artificiais tendo como foco a melhoria nas condições de surfe em suas localidades. Para tanto, esta pesquisa qualitativa exploratória se desenvolve a partir de breve revisão teórica sobre o tema e de um estudo de casos múltiplos – Austrália, Estados Unidos, Nova Zelândia, India e Inglaterra - para sustentar o raciocínio. Os resultados incluem o caráter inovador deste tipo de estrutura demandando um aprimoramento nos métodos de construção e gestão, programas de monitoramento de longo prazo para avaliação de eficácia, desafios na integração de usuários, participação pública nas diferentes etapas do processo, gestão das expectativas dos mercados envolvidos. Uma vez que poucos estudos referentes ao tema foram desenvolvidos até o presente momento, as análises presentes neste trabalho podem contribuir com o preenchimento desta lacuna no conhecimento.

  12. Implementation and modification of a three-dimensional radiation stress formulation for surf zone and rip-current applications

    Science.gov (United States)

    Kumar, N.; Voulgaris, G.; Warner, J.C.

    2011-01-01

    Regional Ocean Modeling System (ROMS v 3.0), a three-dimensional numerical ocean model, was previously enhanced for shallow water applications by including wave-induced radiation stress forcing provided through coupling to wave propagation models (SWAN, REF/DIF). This enhancement made it suitable for surf zone applications as demonstrated using examples of obliquely incident waves on a planar beach and rip current formation in longshore bar trough morphology (Haas and Warner, 2009). In this contribution, we present an update to the coupled model which implements a wave roller model and also a modified method of the radiation stress term based on Mellor (2008, 2011a,b,in press) that includes a vertical distribution which better simulates non-conservative (i.e., wave breaking) processes and appears to be more appropriate for sigma coordinates in very shallow waters where wave breaking conditions dominate. The improvements of the modified model are shown through simulations of several cases that include: (a) obliquely incident spectral waves on a planar beach; (b) obliquely incident spectral waves on a natural barred beach (DUCK'94 experiment); (c) alongshore variable offshore wave forcing on a planar beach; (d) alongshore varying bathymetry with constant offshore wave forcing; and (e) nearshore barred morphology with rip-channels. Quantitative and qualitative comparisons to previous analytical, numerical, laboratory studies and field measurements show that the modified model replicates surf zone recirculation patterns (onshore drift at the surface and undertow at the bottom) more accurately than previous formulations based on radiation stress (Haas and Warner, 2009). The results of the model and test cases are further explored for identifying the forces operating in rip current development and the potential implication for sediment transport and rip channel development. Also, model analysis showed that rip current strength is higher when waves approach at angles of 5

  13. Nanophase formation and its behavior of corrosion resistance in C+Ti dual implanted steel

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    [1]Zhang Huixing,Zhang Xiaoji,Zhou Fengsheng et al.,High current metal-ion source for ion implantation,Rev.Sci.Instrum.,1990,61(1): 574.[2]Zhang Tonghe,Ji Chengzhou,Shen Jinghua et al.,Surface modification of steel by high-dose pulse-ion implantation of titanium,tungsten,molybdenum and carbon,Nucl.Instrum.Methods,1991,B59/60: 828.[3]Zhang Tonghe,Ji Chengzhou,Shen Jinghua et al.,The influence of Ti,N and Ti+N implantation on phase change,microstructure,growth of metallic compounds and correlated effects in hardness and wear resistance in H13 steel,Nucl.Instrum.Methods,1993,B72: 409-420.[4]Zhang Tonghe,Huang Huapeng,Ji Chengzhou et al.,The formation of metallic silicides of Ti,Y,Fe,Mo and W using metal vapor vacuum arc implantation,Surf.Coat.Technol.,1994,66: 355-360.[5]Zhang Tonghe,Ji Chengzhou,Shen Jinghua et al.,Formation of intermetallic compounds with a high flux pulse molybdenum ion beam in steel and aluminum,Surf.Coat.Technol.,1992,51:455-460.[6]Zhang Tonghe,Wang Xiaoyan,Liang Hong et al.,Behavior of MEVVA metal ion implantation for surface modification of materials,Surf.Coat.Technol.,1996,83: 280-283.[7]Zhang Tonghe,Wang Xiaoyan,Liang Hong et al.,Behavior of MEVVA metal ion implantation for surface modification of materials,Surf.Coat.Technol.,1996,83: 280-283.[8]Takakashi,K.,Waki,M.I.,Chemical and electrochemical properties of ion implanted metals,Surf.Coat.Technol.,1994,65:57-63.[9]Wolf,G K.,An historical perspective of ion bombardment research for corrosion studies,Surf.Coat.Technol.,1996,83: 1-9.[10]Zhang Tonghe,Wu Yuguang,Deng Zhiwei et al.,The corrosion behavior of nanometer embedded phase in Ti implanted H13 steel,Science in China,Ser.E,1999,42(6): 623-630.[11]Zhang Tonghe,Wu Yuguang,Yi Zhongzhen et al.,Nanophase formation and its behavior of corrosion resistance in C+Mo dual implanted steel,Science in China,Ser.E,2001,4(4): 383-388.[12]Zhang Tonghe,Wu Yuguang,Deng Zhiwei et al.Properties of corrosion

  14. Multi-layer coatings

    Energy Technology Data Exchange (ETDEWEB)

    Maghsoodi, Sina; Brophy, Brenor L.; Abrams, Ze' ev R.; Gonsalves, Peter R.

    2016-06-28

    Disclosed herein are coating materials and methods for applying a top-layer coating that is durable, abrasion resistant, highly transparent, hydrophobic, low-friction, moisture-sealing, anti-soiling, and self-cleaning to an existing conventional high temperature anti-reflective coating. The top coat imparts superior durability performance and new properties to the under-laying conventional high temperature anti-reflective coating without reducing the anti-reflectiveness of the coating. Methods and data for optimizing the relative thickness of the under-layer high temperature anti-reflective coating and the top-layer thickness for optimizing optical performance are also disclosed.

  15. Spatial and temporal variations of diurnal ichthyofauna on surf-zone of São Francisco do Itabapoana beaches, Rio de Janeiro State, Brazil

    Directory of Open Access Journals (Sweden)

    Gomes Marcelo Paes

    2003-01-01

    Full Text Available Spatial and temporal variations of diurnal ichthyofauna and the environmental variables influences on its distribution were studied at the surf-zone of three beaches of São Francisco do Itabapoana, northern coast of Rio de Janeiro, Brazil. From August/1999 to August/2000, three beach seine hauls were made monthly, and environmental variables were recorded. A total number of 4,562 fishes (74,155g were sampled at the three beaches, where estuarine-dependent species prevailed (44%, followed by marine (31%, estuarine (19% and freshwater species (3%. Species richness, number of individuals and wet weight were significantly higher at Gargaú, followed by Manguinhos and Barra do Itabapoana, respectively. Canonical Correspondence Analysis highlighted influences of the rivers flushing, salinity and plant abundance on the diurnal ichthyofauna distribution and dynamics of São Francisco do Itabapoana surf-zone.

  16. Coating of pumps; coating af pumper

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Hans; Moritzen, J.; Thoegersen, Jeanette

    2005-11-15

    Coating of pumps is a quite new activity. For many years pipes and containers have been coated inside in order to avoid corrosion, but the technology has only been used inside pumps for the last ten years. The technology comes from USA and is originally developed in the space technology industry as an exceptionally durable and corrosion constant coating. The project is a further development of results found in a previous R and D project in which measurements were performed before and after coating two different installations. Both installations showed large efficiency improvements. This project supplements the theory behind losses in pumps with measurements on more pumps. (BA)

  17. The design and implementation of a semi-autonomous surf-zone robot using advanced sensors and a common robot operating system

    OpenAIRE

    Hickle, Jason.; Halle, Steven

    2011-01-01

    Approved for public release; distribution is unlimited. A semi-autonomous vehicle, MONTe, was designed, modeled and tested for deployment and operation in a surf-zone coastal environment. The MONTe platform was designed to use unique land based locomotion that incorporates wheel-legs(WhegsTM) and a tail. Semi-autonomy was realized with data from onboard sensors and implemented through open source Robot Operating System (ROS), hosted on an Ubuntu Linux based processor. Communications vi...

  18. Three-dimensional modelling of wave-induced current from the surf zone to the inner shelf

    Directory of Open Access Journals (Sweden)

    H. Michaud

    2011-12-01

    Full Text Available We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a, following the simplified equations of Bennis et al. (2011 which use glm2z-RANS theory (Ardhuin et al., 2008b. These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010 and SWAN (Booij et al., 1999. The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009 and Uchiyama et al. (2010. A comparison is also made with the laboratory measurements of Haller et al. (2002 of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data.

    Finally, a realistic case of energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea for which currents are available at different depths as well as an accurate bathymetric database of the 0–10 m depth range, is then simulated. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0–15 m depth zone. More precisely, two distinct cases are identified: when waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts

  19. Three-dimensional modelling of wave-induced current from the surf zone to the inner shelf

    Directory of Open Access Journals (Sweden)

    H. Michaud

    2012-08-01

    Full Text Available We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a following the simplified equations of Bennis et al. (2011 which use glm2z-RANS theory (Ardhuin et al., 2008c. These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010 and SWAN (Booij et al., 1999. The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009and Uchiyama et al. (2010. A comparison is also made with the laboratory measurements of Haller et al. (2002 of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data.

    Finally, a realistic case is simulated with energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea for which currents are available at different depths as well as an accurate bathymetric database of the 0–10 m depth range. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0–15 m depth zone. More precisely, two distinct cases are identified: When waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts in the

  20. Surfaces, Coatings and Protection

    Science.gov (United States)

    Ferguson, I. F.

    1982-08-01

    Plasma sprayed ceramics, sputter ion plating, and sol-gel ceramic protective coatings for nuclear reactors are discussed. The influence of such coatings on the behavior of reactor fuel elements is noted. The investigation of such coatings by diffraction methods is described. Laser and nuclear microprobes, scanning transmission electron microscopes, neutron scattering, and image analysis are summarized.

  1. Commercial Fastener Coatings Doerken

    Science.gov (United States)

    2010-06-01

    Phosphating* *partly recommended Dip Spinning Dipping Spraying Spin coating Conveyor oven box oven Inductive drying Pretreatment Coating Preheating...Curing Cooling Application Techniques - Dip Spin Coating Gurtbnd Cross BarTranspo" Band beiCifteiE Vo12one Vent llated Pre .Zone Cros~ Bar T ransrt

  2. PIT Coating Requirements Analysis

    Energy Technology Data Exchange (ETDEWEB)

    MINTEER, D.J.

    2000-10-20

    This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products.

  3. Structural aspects of the surf-zone fish assemblage at King's Beach, Algoa Bay, South Africa: Long-term fluctuations

    Science.gov (United States)

    Lasiak, Theresa A.

    1984-04-01

    Regular collections of fish were obtained from the surf-zone at King's Beach, Algoa Bay. A total of 3970 fish, representing 50 species was caught with a coarse net and 16 857 fish, representing 37 species, were caught with a fine net. Predominant species were the blacktail, Diplodus sargus; the sand steenbras, Lithognathus mormyrus; the mullet, Liza richardsoni; the gorrie, Pomadasys olivaceum; the white stumpnose, Rhabdosargus globiceps; the sandshark, Rhinobatos annulatus; and the streepie, Sarpa salpa. No seasonal trends were discernible in the overall abundance or species diversity. The species composition of the dominant component of the fish assemblage varied considerably. This indicated instability in the community structure and cast doubts on the applicability of a classic community concept and the use of diversity indices. Neither classification nor correspondence analysis were of any use in identifying a characteristic species component. Multiple regression analysis indicated that short-term variations in wind conditions might be a primary determinant of fluctuations in abundance. The lack of seasonality in the community parameters may reflect the fact that short-term variability masks seasonal perturbations.

  4. The Surf Zone Ichthyoplankton Adjacent to an Intermittently Open Estuary, with Evidence of Recruitment during Marine Overwash Events

    Science.gov (United States)

    Cowley, P. D.; Whitfield, A. K.; Bell, K. N. I.

    2001-03-01

    The composition, structure and seasonality of ichthyoplankton in the surf zone adjacent to the mouth of the intermittently open East Kleinemonde Estuary (33°32'S, 27°03'E) were investigated over a period of 2 years. Altogether 451 fishes, representing at least 21 taxa from 14 families, were collected. The assemblage was dominated by postflexion larvae of euryhaline marine species that are dependent on estuaries as nursery areas. The sparid Rhabdosargus holubi was the most abundant taxon and constituted more than 77% of the total catch. A distinct modal size class was identified for R. holubi , while the mean individual size of this and other abundant taxa was comparable to the observed recruitment size range reported from a wide variety of estuarine nursery habitats in southern Africa. Periodic regression analyses revealed significant peaks in abundance of larval R. holubi during late winter (August), at down and dusk, at new and full moon (spring tides), and on the flood stage of the tidal cycle. Evidence for estuarine immigration during marine overwash events (surging rough seas that enter the estuary) is provided by (1) the stranding of postflexion larvae in the region of the closed estuary mouth following these events, and (2) back extrapolation from length modes within the estuary to coincide with such an event. The advantages and disadvantages of such a recruitment strategy are discussed.

  5. Feature description with SIFT, SURF, BRIEF, BRISK, or FREAK? A general question answered for bone age assessment.

    Science.gov (United States)

    Kashif, Muhammad; Deserno, Thomas M; Haak, Daniel; Jonas, Stephan

    2016-01-01

    Solving problems in medical image processing is either generic (being applicable to many problems) or specific (optimized for a certain task). For example, bone age assessment (BAA) on hand radiographs is a frequent but cumbersome task for radiologists. For this problem, many specific solutions have been proposed. However, general-purpose feature descriptors are used in many computer vision applications. Hence, the aim of this study is (i) to compare the five leading keypoint descriptors on BAA, and, in doing so, (ii) presenting a generic approach for a specific task. Two methods for keypoint selection were applied: sparse and dense feature points. For each type, SIFT, SURF, BRIEF, BRISK, and FREAK feature descriptors were extracted within the epiphyseal regions of interest (eROI). Classification was performed using a support vector machine. Reference data (1101 radiographs) of the University of Southern California was used for 5-fold cross-validation. The data was grouped into 30 classes representing the bone age range of 0-18 years. With a mean error of 0.605 years, dense SIFT gave best results and outperforms all published methods. The accuracy was 98.36% within the range of 2 years. Dense SIFT represents a generic method for a specific question.

  6. Rancang Bangun Game Aksi dengan Integrasi dan Pengenalan Gambar Menggunakan Algoritma Ekstraksi Fitur SURF dan Klasifikasi SVM pada Perangkat Android

    Directory of Open Access Journals (Sweden)

    Bryan Nandriawan

    2017-01-01

    Full Text Available Saat ini perangkat mobile berbasis Android dan iOS sangat digemari oleh anak-anak. Mereka yang telah memiliki perangkat mobile akan menghabiskan seluruh waktunya untuk menatap layar perangkat saat bermain. Akibat yang ditimbulkan adalah penurunan kesehatan mata dan kurangnya bersosialisasi dengan teman sebaya. Menggambar adalah hal yang disukai anak-anak. Dengan menggabungkan menggambar dengan permainan perangkat mobile, anak-anak akan tetap merasa bermain meski mereka sedang tidak menatap layar untuk menggambar. Tugas akhir ini bertujuan untuk membangun sebuah permainan yang dapat mengenali gambar dan menggunakan gambar tersebut dalam permainan. Metode pengenalan gambar dalam tugas akhir ini dilakukan dengan menggunakan metode Edge Detection dengan algoritma ekstraksi fitur SURF (Speeded-Up Robust Features dan klasifikasi SVM (Support Vector Machine. Jenis permainan yang dibangun merupakan gabungan dari aksi dan tower defense. Hasil dari tugas akhir ini dibagi menjadi 3 yaitu hasil fungsionalitas permainan, hasil daya tarik permainan dan hasil akurasi pengenalan gambar. Semua fungsi yang dibuat pada permainan dapat berjalan dengan baik, dan permainan juga telah memiliki daya tarik yang memikat. Namun hasil akurasi pengenalan gambar masih kurang dari harapan penulis.

  7. PADDLING PERFORMANCE AND RANKING POSITION IN JUNIOR SURFERS COMPETING AT THE ASSOCIATION OF SURFING PROFESSIONALS: A PILOT STUDY

    Directory of Open Access Journals (Sweden)

    Jesús Cámara

    2011-11-01

    Full Text Available Abstract  The aims of this pilot study are on one hand, to evaluate the upper body aerobic characteristics of junior surfers competing at the European branch of the Association of Surfing Professionals (ASP and on the other, to assess the relationship between the junior surfers' upper body aerobic characteristics and their ranking position. Ten surfers competing at the European junior branch of the ASP took part in the study. The maximal oxygen uptake (VO2MAX, the maximum power output (WMAX, the maximum lactate concentration [La]MAX, the maximum heart rate (HRMAX and the power output at the intensity where the lactate threshold and the onset of blood lactate accumulation are produced (WLT and WOBLA were determined during an incremental maximal test in a swim bench ergometer. It was observed a lack of a significant relationship between the ranking position and the parameters at maximal intensity (VO2PEAK, WMAX, HRMAX y [La]MAX. The WLT (W · kg-1 and the WOBLA (W · kg-1 were significantly related to ranking position (r= -0.69, p= 0.02; r= -0.72, p= 0.01, respectively.

  8. Self-organizing maps and VolSurf approach to predict aldose reductase inhibition by flavonoid compounds

    Directory of Open Access Journals (Sweden)

    Luciana Scotti

    2011-02-01

    Full Text Available Aldose Reductase (AR is the polyol pathway key enzyme which converts glucose to sorbitol. High glucose availability in insulin resistant tissues in diabetes leads into an accumulation of sorbitol, which has been associated with typical chronic complications of this disease, such as neuropathy, nephropathy and retinopathy. In this study, 71 flavonoids AR inhibitors were subjected to two methods of SAR to verify crucial substituents. The first method used the PCA (Principal Component Analysis to elucidate physical and chemical characteristics in the molecules that would be essential for the activity, employing VolSurf descriptors. The rate obtained explained 53% of the system total variance and revealed that a hydrophobic-hydrophilic balance in the molecules is required, since very polar or nonpolar substituents decrease the activity. Artificial Neural Networks (ANNs was also employed to determine key substituents by evaluating substitution patterns, using NMR data. This study had a high success rate (85% accuracy in the training set and 88% accuracy in the test set and showed polihydroxilations are essential for high activity and methoxylations and glicosilations primarily at positions C7, C3' and C4' decrease the activity.

  9. Hard and superhard nanocomposite coatings

    Energy Technology Data Exchange (ETDEWEB)

    Musil, J. [Univ. of West Bohemia, Plzen (Czech Republic). Dept. of Phys.

    2000-03-01

    This article reviews the development of hard coatings from a titanium nitride film through superlattice coatings to nanocomposite coatings. Significant attention is devoted to hard and superhard single layer nanocomposite coatings. A strong correlation between the hardness and structure of nanocomposite coatings is discussed in detail. Trends in development of hard nanocomposite coatings are also outlined. (orig.)

  10. Corrigendum to “Enhancing coating of brushite/hydroxyapatite layer on titanium alloy implant surface with additives” [Appl. Surf. Sci. 285P (2013) 136-143

    Science.gov (United States)

    Abdel-Aal, E. A.; El-Sayed, D.; Shoeib, M.; Kandil, A. T.; Kandil, A. T.

    2014-01-01

    The authors regret typos in Ref. [27] "R. Dreveta, H. Benhayounea, L. Worthama, S. Potirona, J. Dougladeb, D. Laurent-Maquina" should be replaced by "R. Drevet, H. Benhayoune, L. Wortham, S. Potiron, J. Douglade, D. Laurent-Maquin".

  11. Antibacterial polymer coatings.

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Mollye C.; Allen, Ashley N.; Barnhart, Meghan; Tucker, Mark David; Hibbs, Michael R.

    2009-09-01

    A series of poly(sulfone)s with quaternary ammonium groups and another series with aldehyde groups are synthesized and tested for biocidal activity against vegetative bacteria and spores, respectively. The polymers are sprayed onto substrates as coatings which are then exposed to aqueous suspensions of organisms. The coatings are inherently biocidal and do not release any agents into the environment. The coatings adhere well to both glass and CARC-coated coupons and they exhibit significant biotoxicity. The most effective quaternary ammonium polymers kills 99.9% of both gram negative and gram positive bacteria and the best aldehyde coating kills 81% of the spores on its surface.

  12. Vacuum plasma spray coating

    Science.gov (United States)

    Holmes, Richard R.; Mckechnie, Timothy N.

    1989-01-01

    Currently, protective plasma spray coatings are applied to space shuttle main engine turbine blades of high-performance nickel alloys by an air plasma spray process. Originally, a ceramic coating of yttria-stabilized zirconia (ZrO2.12Y2O3) was applied for thermal protection, but was removed because of severe spalling. In vacuum plasma spray coating, plasma coatings of nickel-chromium-aluminum-yttrium (NiCrAlY) are applied in a reduced atmosphere of argon/helium. These enhanced coatings showed no spalling after 40 MSFC burner rig thermal shock cycles between 927 C (1700 F) and -253 C (-423 F), while current coatings spalled during 5 to 25 test cycles. Subsequently, a process was developed for applying a durable thermal barrier coating of ZrO2.8Y2O3 to the turbine blades of first-stage high-pressure fuel turbopumps utilizing the enhanced NiCrAlY bond-coating process. NiCrAlY bond coating is applied first, with ZrO2.8Y2O3 added sequentially in increasing amounts until a thermal barrier coating is obtained. The enchanced thermal barrier coating has successfully passed 40 burner rig thermal shock cycles.

  13. Anticorrosive coatings: a review

    DEFF Research Database (Denmark)

    Sørensen, Per Aggerholm; Kiil, Søren; Dam-Johansen, Kim

    2009-01-01

    The main objective of this review is to describe some of the important topics related to the use of marine and protective coatings for anticorrosive purposes. In this context, "protective" refers to coatings for containers, offshore constructions, wind turbines, storage tanks, bridges, rail cars......, and petrochemical plants while "marine" refers to coatings for ballast tanks, cargo holds and cargo tanks, decks, and engine rooms on ships. The review aims at providing a thorough picture of state-of-the-art in anticorrosive coatings systems. International and national legislation aiming at reducing the emission...... of volatile organic compounds (VOCs) have caused significant changes in the anticorrosive coating industry. The requirement for new VOC-compliant coating technologies means that coating manufacturers can no longer rely on the extensive track record of their time-served products to convince consumers...

  14. Evaluation of HVOF coatings

    Directory of Open Access Journals (Sweden)

    Mariana Landová

    2016-07-01

    Full Text Available Attention in this paper is devoted to the evaluation of wear coatings deposited using HVOF technology (high velocity oxy-fuel. There were evaluated three types of coatings based on WC-Co (next only 1343, WC-Co-Cr (next only 1350 and Cr3C2-25NiCr (next only 1375. There was assessed adherence of coatings, micro hardness, porosity and the tribological properties of erosive, abrasive, adhesive and wear resistance of coatings in terms of cyclic thermal load. Thanks to wide variety of suitable materials and their combinations, the area of utilization thermally sprayed coatings is very broad. It is possible to deposit coatings of various materials from pure metals to special alloys. The best results in the evaluated properties were achieved at the coating with the label 1375.

  15. Combustion chemical vapor desposited coatings for thermal barrier coating systems

    Energy Technology Data Exchange (ETDEWEB)

    Hampikian, J.M.; Carter, W.B. [Georgia Institute of Technology, Atlanta, GA (United States)

    1995-10-01

    The new deposition process, combustion chemical vapor deposition, shows a great deal of promise in the area of thermal barrier coating systems. This technique produces dense, adherent coatings, and does not require a reaction chamber. Coatings can therefore be applied in the open atmosphere. The process is potentially suitable for producing high quality CVD coatings for use as interlayers between the bond coat and thermal barrier coating, and/or as overlayers, on top of thermal barrier coatings.

  16. Home-loving boreal hare mitochondria survived several invasions in Iberia: the relative roles of recurrent hybridisation and allele surfing.

    Science.gov (United States)

    Melo-Ferreira, J; Farelo, L; Freitas, H; Suchentrunk, F; Boursot, P; Alves, P C

    2014-03-01

    Genetic introgression from a resident species into an invading close relative can result from repeated hybridisation along the invasion front and/or allele surfing on the expansion wave. Cases where the phenomenon is massive and systematic, such as for hares (genus Lepus) in Iberia, would be best explained by recurrent hybridisation but this is difficult to prove because the donor populations are generally extinct. In the Pyrenean foothills, Lepus europaeus presumably replaced Lepus granatensis recently and the present species border is parallel to the direction of invasion, so that populations of L. granatensis in the contact zone represent proxies of existing variation before the invasion. Among three pairs of populations sampled across this border, we find less differentiation of mitochondrial DNA (mtDNA) across than along it, as predicted under recurrent hybridisation at the invasion front. Using autosomal microsatellite loci and X- and Y-linked diagnostic loci, we show that admixture across the border is quasi-absent, making it unlikely that lack of interspecific mtDNA differentiation results from ongoing gene flow. Furthermore, we find that the local species ranges are climatically contrasted, making it also unlikely that ongoing ecology-driven movement of the contact account for mtDNA introgression. The lack of mtDNA differentiation across the boundary is mostly due to sharing of mtDNA from a boreal species currently extinct in Iberia (Lepus timidus) whose mitochondria have thus remained in place since the last deglaciation despite successive invasions by two other species. Home-loving mitochondria thus witness past species distribution rather than ongoing exchanges across stabilised contact zones.

  17. SURF-based position estimation method using aerial image sequences.%基于SURF特征的航空序列图像位置估计算法

    Institute of Scientific and Technical Information of China (English)

    乔奎贤; 赵妮; 李耀军

    2013-01-01

    视觉传感器在航空无人机导航和定位任务中应用越来越广泛。针对无人机位置参数估计问题,提出了一种基于SURF特征的图像配准算法,该算法能够适应航空序列图像的旋转、尺度变换及噪声干扰,实现无人机位置的精确估计。构建了SURF尺度空间,运用快速Hessian矩阵定位极值点,计算出航空图像的64维SURF特征描述子;基于Hessian矩阵迹完成特征点匹配;使用RANSAC算法剔除出格点,实现位置参数的精确估计。通过航空图像序列实测数据位置估计实验,验证了该算法的有效性。%Vision sensor is widely used in the aviation aircraft navigation and positioning tasks. For position parameter estima-tion of aircraft, this paper presents a SURF feature based image registration algorithm, it is able to adapt to aerial image sequence rotation, scale transformation and noise, to achieve accurate estimates of aircraft position. It builds SURF scale space, uses fast Hessian matrix maximum values to calculate 64-dimensional SURF feature descriptors of aerial images. Based on the trace of the Hessian matrix, it completes feature points matching task. By using RANSAC algorithm, it removes the outliers matching points for accurate position estimate. Experiments with two real aerial image sequences show the effectiveness of the proposed position estimation algorithm.

  18. 基于SURF算子的快速手背静脉识别%Fast recognition of hand vein with SURF descriptors

    Institute of Scientific and Technical Information of China (English)

    李秀艳; 刘铁根; 邓仕超; 何瑾; 王云新

    2011-01-01

    A recognition algorithm for hand vein based on speeded-up robust features( SURF) was proposed. Firstly,the region of interest ( ROI) of the hand vein image is obtained through image preprocessing. The local SURF features of test sample and register samples are extracted and matched based on Euclid distance, and then the mismatching pairs are rejected. Finally, the matching rate is calculated as the similarity between registered sample and test sample to realize personal identity recognition. The recognition performance was evaluated in verification mode using TJU hand vein image database, the equal error rate ( EER) is 0.07% and average recognition time is 0.153 s. Experimental results show that the proposed algorithm is able to realize hand vein recognition reliably and quickly.%提出基于加速鲁棒性特征(speeded-up robustfeatures,SURF)的手背静脉识别算法.首先对手背静脉图像进行预处理,提取手背静脉感兴趣区域(ROI),然后提取手背静脉的局部SURF特征,基于欧式距离实现测试样本和注册样本特征点的匹配,并剔除错误匹配对,最后计算匹配率作为待识别样本和注册样本之间的相似度测试实现身份识别.利用TJU手背静脉图像数据库对算法性能进行测试,在认证模式下等错率为0.07%,平均识别时间0.153 s.实验结果证明该算法可以快速有效地实现手背静脉识别.

  19. 基于特性分析的SURF加速方法研究%RESEARCH ON SPEED-UP METHOD OF SURF THROUGH PROPERTIES ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    胡益斌; 肖菁; 戴卓方; 李戈; 张为华

    2012-01-01

    To resolve the problem of a little bit low speed the typical image feature extraction algorithm SURF (speeded up robust feature) has, in the paper we do an in-depth analysis on the algorithm properties in regard to its running time, instruction type, memory access, hot spots,and etc. On this basis, we optimise the SURF algorithm by reconstructing the judgment logic, the memory accessing and data organisations,the library functions implementation and other strategies. Moreover,we analyse the role of speedup of each optimisation strategy on the algorithm through experiments. And experimental data show that these optimisation strategies can effectively improve the running efficiency of SURF in the premise of guaranteeing 100% accuracy of the algorithm, and 2. 75X ultimate performance improvement is achieved.%针对典型图像特征提取算法SURF速度偏慢的问题,深入分析该算法在运行时间、指令类型、内存访问、热点等方面的特性.在此基础上,运用重构判断逻辑、重构内存访问与数据组织形式、重构库函数实现等策略对SURF算法进行优化.并通过实验,分析各种优化策略对算法的加速作用.实验数据显示,这些优化策略可以在保证算法100%精确的前提下,有效地提高SURF算法的运行效率,最终达到2.75X的性能提升.

  20. Electrospark deposition coatings

    Science.gov (United States)

    Sheely, W. F.

    1986-11-01

    Hard surfacing for wear resistant and low-friction coatings has been improved by means of advances in the computer controls in electronic circuitry of the electrospark deposition (ESD) process. coatings of nearly any electrically conductive metal alloy or cermet can be deposited on conductive materials. Thickness is usually two mils or less, but can be as high as 10 mils. ESD coatings can quadrupole cutting tool life.

  1. Advanced Multifunctional Coating

    Science.gov (United States)

    2011-08-17

    and UV durability of then current chrome free TT-P-2756 SPTC • Leverage APC technology into SPTC • Coating uses same fluoropolyurethane technology...as APC currently used on C-17 • Leverage recent advances in chrome free corrosion inhibitor technology • State of the art chrome free corrosion...coat exposed metal Aluminum Base Metal Original Finish System Aged APC Topcoat Conversion Coat Chromic Acid Anodize Aluminum Cladding Original Primer

  2. Webpage Recommendation Model in Personal Surfing%个性化浏览中网页推荐的结构模型

    Institute of Scientific and Technical Information of China (English)

    苏贵洋; 王永成; 马颖华

    2003-01-01

    This paper first introduces the inevitability direction of Internet personal technique's development, and then analyzes the differences between Information Retrieval and Information Filtering. Further more, combining with the group user interests and individual user interests, using VSM and FCM algorithm, this paper proposes a webpage recommendation model in personal surfing. This model can be applied not only in single website, but also in enterprise information collecting system. It also brings forward a method to extend concept. The advantage of the model is automatic concepts learning in the processing of user's feedback and browsing. Contrasting to concept dictionary method, it is more agility and gains well retrieval results.

  3. Diversificação na gestão estratégica em microempresas de ensino do surfe: um estudo multicasos

    OpenAIRE

    Cruz, Ana Carolina Costa

    2015-01-01

    Podemos observar a existência de diversas estratégias que norteiam o desenvolvimento de um negócio. Uma delas é a diversificação. Esta dissertação apresenta um estudo da diversificação na gestão estratégica de microempresas de ensino do surfe (MEES) do Rio de Janeiro. No caso das MEES, há particularidades que tornam muito importante a diversificação para a sobrevivência e desenvolvimento delas. Por isso, escolhemos estudar o tema nesse tipo de empresa. A pesquisa analisou o processo de divers...

  4. Oxide coating development

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, D.P.

    1995-06-01

    Monolithic SiC heat exchangers and fiber-reinforced SiC-matrix composite heat exchangers and filters are susceptible to corrosion by alkali metals at elevated temperatures. Protective coatings are currently being developed to isolate the SiC materials from the corrodants. Unfortunately, these coatings typically crack and spall when applied to SiC substrates. The purpose of this task is to determine the feasibility of using a compliant material between the protective coating and the substrate. The low-modulus compliant layer could absorb stresses and eliminate cracking and spalling of the protective coatings.

  5. Superhard Nanocomposite Coatings

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The recent development in the field of nanocomposite coatings with good mechanical properties is critically reviewed in this paper. The design principle and materials selection for the nanocomposite coatings are introduced. Different methods for the preparation of superhard nanocomposite coatings are described with emphasis on the magnetron sputtering. Based on recent theoretical and experimental results regarding the appearance of superhardness in nanocomposite coating, lattice parameter changes, crystallite size, microstructure and morphology are reviewed in detail. Also emphasized are the mechanical properties (especially on hardness) and the ways by which the properties are derived.

  6. Combustion chemical vapor deposited coatings for thermal barrier coating systems

    Energy Technology Data Exchange (ETDEWEB)

    Hampikian, J.M.; Carter, W.B. [Georgia Institute of Technology, Atlanta, GA (United States). School of Materials Science and Engineering

    1995-12-31

    The new deposition process, combustion chemical vapor deposition, shows a great deal of promise in the area of thermal barrier coating systems. This technique produces dense, adherent coatings, and does not require a reaction chamber. Coatings can therefore be applied in the open atmosphere. The process is potentially suitable for producing high quality CVD coatings for use as interlayers between the bond coat and thermal barrier coating, and/or as overlayers, on top of thermal barrier coatings. In this report, the evaluation of alumina and ceria coatings on a nickel-chromium alloy is described.

  7. Combustion chemical vapor deposited coatings for thermal barrier coating systems

    Energy Technology Data Exchange (ETDEWEB)

    Hampikian, J.M.; Carter, W.B. [Georgia Institute of Technology, Atlanta, GA (United States). School of Materials Science and Engineering

    1995-12-31

    The new deposition process, combustion chemical vapor deposition, shows a great deal of promise in the area of thermal barrier coating systems. This technique produces dense, adherent coatings, and does not require a reaction chamber. Coatings can therefore be applied in the open atmosphere. The process is potentially suitable for producing high quality CVD coatings for use as interlayers between the bond coat and thermal barrier coating, and/or as overlayers, on top of thermal barrier coatings. In this report, the evaluation of alumina and ceria coatings on a nickel-chromium alloy is described.

  8. Mechanically Invisible Polymer Coatings

    DEFF Research Database (Denmark)

    2014-01-01

    phase comprises particles, said particles comprising a filler material and an encapsulating coating of a second polymeric material, wherein the backbones of the first and second polymeric materials are the same. The composition may be used in electroactive polymers (EAPs) in order to obtain mechanically...... invisible polymer coatings....

  9. Chinese Decorative Coatings Market

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Growth prospects The Chinese market for decorative coatings, excluding non-architectural products such as industrial varnishes,marine paint and other industrially applied coatings, has been growing byaround 10% annually and was estimated to be worth Eurol.3 billion a year, with an annual per capita consumption of just less than 1 liter ofpaint.

  10. Rock-hard coatings

    NARCIS (Netherlands)

    Muller, M.

    2007-01-01

    Aircraft jet engines have to be able to withstand infernal conditions. Extreme heat and bitter cold tax coatings to the limit. Materials expert Dr Ir. Wim Sloof fits atoms together to develop rock-hard coatings. The latest invention in this field is known as ceramic matrix composites. Sloof has sign

  11. Coating of graphene

    NARCIS (Netherlands)

    Schneider, G.F.; Dekker, C.

    2014-01-01

    The present invention is in the field of highly crystalline graphene and coating said graphene with a layer. Said graphene may have further structures, such as nanopores, nanogaps, and nanoribbons. The coated graphene can be used for biomolecular analysis and modification, such as DNA-sequencing, as

  12. Unobtrusive graphene coatings

    NARCIS (Netherlands)

    Mugele, Friedrich Gunther

    2012-01-01

    The contact angle of water drops on substrates for which the wettability is dominated by van der Waals forces remains unchanged when the substrates are coated with a monolayer of graphene. Such 'wetting transparency' could lead to superior conducting and hydrophobic graphene-coated surfaces with tun

  13. Coated electroactive materials

    Energy Technology Data Exchange (ETDEWEB)

    Amine, Khalil; Abouimrane, Ali

    2016-08-30

    A process includes suspending an electroactive material in a solvent, suspending or dissolving a carbon precursor in the solvent; and depositing the carbon precursor on the electroactive material to form a carbon-coated electroactive material. Compositions include a graphene-coated electroactive material prepared from a solution phase mixture or suspension of an electroactive material and graphene, graphene oxide, or a mixture thereof.

  14. Coating of graphene

    NARCIS (Netherlands)

    Schneider, G.F.; Dekker, C.

    2014-01-01

    The present invention is in the field of highly crystalline graphene and coating said graphene with a layer. Said graphene may have further structures, such as nanopores, nanogaps, and nanoribbons. The coated graphene can be used for biomolecular analysis and modification, such as DNA-sequencing, as

  15. Nanostructured Protective Coatings

    Science.gov (United States)

    2006-01-01

    stresses induce strain fatigue with subsequent formation of cracks. Cracking in coatings leads to materials failure observed physically as spallation or...elevated temperatures. In this test a hole is drilled into the substrate before coating it. This allows a fixed amount of air to be trapped at the

  16. Observations of wave-induced pore pressure gradients and bed level response on a surf zone sandbar

    Science.gov (United States)

    Anderson, Dylan; Cox, Dan; Mieras, Ryan; Puleo, Jack A.; Hsu, Tian-Jian

    2017-06-01

    Horizontal and vertical pressure gradients may be important physical mechanisms contributing to onshore sediment transport beneath steep, near-breaking waves in the surf zone. A barred beach was constructed in a large-scale laboratory wave flume with a fixed profile containing a mobile sediment layer on the crest of the sandbar. Horizontal and vertical pore pressure gradients were obtained by finite differences of measurements from an array of pressure transducers buried within the upper several centimeters of the bed. Colocated observations of erosion depth were made during asymmetric wave trials with wave heights between 0.10 and 0.98 m, consistently resulting in onshore sheet flow sediment transport. The pore pressure gradient vector within the bed exhibited temporal rotations during each wave cycle, directed predominantly upward under the trough and then rapidly rotating onshore and downward as the wavefront passed. The magnitude of the pore pressure gradient during each phase of rotation was correlated with local wave steepness and relative depth. Momentary bed failures as deep as 20 grain diameters were coincident with sharp increases in the onshore-directed pore pressure gradients, but occurred at horizontal pressure gradients less than theoretical critical values for initiation of the motion for compact beds. An expression combining the effects of both horizontal and vertical pore pressure gradients with bed shear stress and soil stability is used to determine that failure of the bed is initiated at nonnegligible values of both forces.Plain Language SummaryThe pressure gradient present within the seabed beneath breaking waves may be an important physical mechanism transporting sediment. A large-scale laboratory was used to replicate realistic surfzone conditions in controlled tests, allowing for horizontal and vertical pressure gradient magnitudes and the resulting sediment bed response to be observed with precise instruments. Contrary to previous studies

  17. MEASURING THE STELLAR MASSES OF z ∼ 7 GALAXIES WITH THE SPITZER ULTRAFAINT SURVEY PROGRAM (SURFS UP)

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, R. E. Jr.; Casertano, S.; Stiavelli, M. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Gonzalez, A. H. [Department of Astronomy, University of Florida, 211 Bryant Space Science Center, Gainesville, FL 32611 (United States); Lemaux, B. C. [Aix Marseille Université, CNRS, LAM (Laboratoire d' Astrophysique de Marseille) UMR 7326, F-13388 Marseille (France); Bradač, M.; Cain, B.; Hall, N.; Huang, K.-H.; Lubin, L. [University of California, One Shields Avenue, Davis, CA 95616 (United States); Allen, S.; Von der Linden, A. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, 452 Lomita Mall, Stanford, CA 94305-4085 (United States); Gladders, M. [Department of Astronomy and Astrophysics, University of Chicago, 5640 South Ellis Avenue, Chicago, IL 60637 (United States); Hildebradt, H.; Schrabback, T. [Argelander Institute for Astronomy, University of Bonn, Auf dem Hügel 71, D-53121 Bonn (Germany); Hinz, J.; Zaritsky, D. [Steward Observatory, University of Arizona, 933 N. Cherry Avenue, Tucson, AZ 85721 (United States); Treu, T., E-mail: rryan@stsci.edu [Department of Physics, University of California, Santa Barbara, CA 93106 (United States)

    2014-05-01

    We present Spitzer/IRAC observations of nine z'-band dropouts highly magnified (2 ≲ μ ≲ 12) by the Bullet Cluster. We combine archival imaging with our Exploratory program (SURFS UP), which results in a total integration time of ∼30 hr per Infrared Array Camera (IRAC) band. We detect (≳ 3σ) in both IRAC bands the brightest of these high-redshift galaxies, with [3.6] = 23.80 ± 0.28 mag, [4.5] = 23.78 ± 0.25 mag, and (H – [3.6]) = 1.17 ± 0.32 mag. The remaining eight galaxies are undetected to [3.6] ∼ 26.4 mag and [4.5] ∼ 26.0 mag with stellar masses of ∼5 × 10{sup 7} M {sub ☉}. The detected galaxy has an estimated magnification of μ = 12 ± 4, which implies this galaxy has an ultraviolet luminosity of L{sub 1500}∼0.3 L{sub z=7}{sup ∗}—the lowest-luminosity individual source detected in IRAC at z ≳ 7. By modeling the broadband photometry, we estimate the galaxy has an intrinsic star formation rate (SFR) of SFR ∼ 1.3 M {sub ☉} yr{sup –1} and stellar mass of M ∼ 2.0 × 10{sup 9} M {sub ☉}, which gives a specific star formation rate of sSFR ∼ 0.7 Gyr{sup –1}. If this galaxy had sustained this SFR since z ∼ 20, it could have formed the observed stellar mass (to within a factor of ∼2). We also discuss alternate star formation histories and argue that the exponentially increasing model is unlikely. Finally, based on the intrinsic SFR, we estimate that this galaxy has a likely [C II] flux of (f {sub [C} {sub II]}) = 1.6 mJy.

  18. PAISAJE, PATRIMONIO Y TURISMO DE SURF: FACTORES DE ATRACCIÓN Y MOTIVACIÓN EN EL «PARQUE NATURAL DEL ESTRECHO» (ESPAÑA

    Directory of Open Access Journals (Sweden)

    Manuel Rivera Mateos

    2016-01-01

    Full Text Available En este trabajo se estudia la incidencia de diversos factores geográficos, físico-ambien - tales, paisajísticos y socioculturales en la conformación y desarrollo de un destino especia - lizado en turismo deportivo de naturaleza y deportes acuáticos (win dsurf, surf, kite surf ...: Tarifa y el Parque Natural del Estrecho. Se realiza un análisis de los valores ambientales, climáticos, paisajísticos e histórico-culturales de los espacios que conforman su sistema de patrimonio territorial y que sirven de soporte y cualificación de las prácticas surferas, así como de la percepción de los mismos como factores competitivos y de atracción y sostenibi - lidad turísticas entre los agentes locales implicados en el desarrollo de estos deportes a partir de su propia experiencia y valoración.

  19. 骑浪横甩薄弱性衡准技术的发展%Development of Surf-riding Broaching Vulnerability Criteria Technology

    Institute of Scientific and Technical Information of China (English)

    唐哲

    2014-01-01

    This article introduces the physical background and the vulnerability criterion development process for the first layer and the second layer of surf-riding/broaching. Also it analyzes the preliminary criteria and the vulnerability criteria method for calculating of surf-riding/broaching. Mastering the development state of this technology can be useful for the research of relative area, and would become the base for the second general criteria technology.%介绍了骑浪/横甩的物理背景,以及骑浪/横甩第一层和第二层薄弱性衡准发展过程,并分析了骑浪横甩薄弱性衡准计算方法及初步衡准,掌握骑浪横甩薄弱性衡准技术的发展现状,有助于骑浪/横甩相关技术领域的研究,为船舶第二代完整稳性的技术发展奠定基础。

  20. SIFT和SURF在无人机影像匹配的对比研究%Comparative Study of SIFT and SURF in UAV Image Matching

    Institute of Scientific and Technical Information of China (English)

    罗亮; 熊助国

    2016-01-01

    The characteristics of the UAV image, in combination with the characteristics of SIFT and SURF operators, the two operators are com-pared in terms of feature extraction efficiency and feature extraction speed, according to the experiments on two kinds of operators in eval-uating the pros and cons of UAV image matching, the experiments show that SURF has a speed advantage, also in green vegetation cover surface can match is better than SIFT operator.%从无人机影像的特点考虑,结合SIFT和SURF算子的特点进行了两种算子在特征提取有效性、特征提取速度方面的比对,通过对两种算子在无人机影像匹配的实验中凸现的好坏做出评价,实验发现SURF的优势不仅仅在速度上,而且在绿色植被覆盖的地表下能匹配效果要优于SIFT算子。

  1. 基于SURF特征与模糊推理的掌纹识别%Palmprint recognition based on SURF features and fuzzy reasoning

    Institute of Scientific and Technical Information of China (English)

    陶筱娇; 王晅

    2016-01-01

    To alleviate the limitations that the existing palmprint recognition methods are time-consuming, and their robustness to the variations of orientation, position and illumination in capturing palmprint images is insufficient, this paper describes a new palmprint recognition method based on Speeded Up Robust Features(SURF)and fuzzy reasoning. The proposed method consists of two phases: enrolling phase and identification phase. In the enrolling phase, keypoints are detected with SURF from the enrolled palmprint images and mutually matched between training samples, and then for each enrolled user, the keypoints which matching frequencies exceed 50% are selected. For each selected keypoint, the matching rate, the mean and variance of the location coordinates and the mean of SURF descriptors in the enrolled palmprint images, the maximal distance between the mean and the SURF descriptors are determined and regarded as the user's palmprint patterns stored in a pattern library. In the identification phase, it utilizes SURF to detect keypoints from the palmprint image to be identified, and then the fuzzy matching degrees for all palmprint patterns in the library are calculated. A fussy reasoning approach is developed for matching. Experimental results demonstrate that the proposed method yields a better performance in terms of the correct classification percentages compared with the recent palmprint recognition algorithms. It is also shown that the proposed approach is robust to the variations of orientation, position and illumination, and yields observably low computational cost.%针对现有掌纹识别算法对掌纹图像在采集过程中的位置、方向、亮度变化缺乏足够的鲁棒性,而且计算复杂度较高的问题,提出了一种基于SURF描述字的掌纹识别算法.算法分为训练与识别两个过程,在训练过程中,提取属于同一类所有训练样本的SURF描述字进行互配,然后计算训练样本中互配

  2. Fluorine Based Superhydrophobic Coatings

    Directory of Open Access Journals (Sweden)

    Jean-Denis Brassard

    2012-05-01

    Full Text Available Superhydrophobic coatings, inspired by nature, are an emerging technology. These water repellent coatings can be used as solutions for corrosion, biofouling and even water and air drag reduction applications. In this work, synthesis of monodispersive silica nanoparticles of ~120 nm diameter has been realized via Stöber process and further functionalized using fluoroalkylsilane (FAS-17 molecules to incorporate the fluorinated groups with the silica nanoparticles in an ethanolic solution. The synthesized fluorinated silica nanoparticles have been spin coated on flat aluminum alloy, silicon and glass substrates. Functionalization of silica nanoparticles with fluorinated groups has been confirmed by Fourier Transform Infrared spectroscopy (FTIR by showing the presence of C-F and Si-O-Si bonds. The water contact angles and surface roughness increase with the number of spin-coated thin films layers. The critical size of ~119 nm renders aluminum surface superhydrophobic with three layers of coating using as-prepared nanoparticle suspended solution. On the other hand, seven layers are required for a 50 vol.% diluted solution to achieve superhydrophobicity. In both the cases, water contact angles were more than 150°, contact angle hysteresis was less than 2° having a critical roughness value of ~0.700 µm. The fluorinated silica nanoparticle coated surfaces are also transparent and can be used as paint additives to obtain transparent coatings.

  3. Phenol-formaldehyde intumescent coating composition and coating prepared therefrom

    Science.gov (United States)

    Salyer, Ival O. (Inventor); Fox, Bernard L. (Inventor)

    1986-01-01

    Intumescent coatings which form a thick, uniform, fine celled, low density foam upon exposure to a high intensity heat flux or flame are disclosed, the invention coatings comprise phenolic resin prepolymer containing a blowing agent and a nucleating agent; in the preferred embodiments the coatings also contains a silicone surfactant, the coatings are useful in thermal and fire protection systems.

  4. Coatings to prevent frost

    DEFF Research Database (Denmark)

    Lusada, Ricardo; Holberg, Stefan; Bennedsen, Jeanette Marianne Dalgaard

    2016-01-01

    The ability of hydrophobic, organic–inorganic hybrid coatings to decelerate frost propagation was investigated. Compared to a bare aluminum surface, the coatings do not significantly reduce the freezing probability of supercooled water drops. On both surfaces, the probability for ice nucleation...... at temperatures just below 0°C, for example at −4°C, is low. Freezing of a single drop on aluminum leads, however, to instant freezing of the complete surface. On hydrophobic coatings, such a freezing drop is isolated; the frozen area grows slowly. At −4°C surface temperature in a +12°C/90% relative humidity...

  5. Surfing a Standing Wave

    Science.gov (United States)

    de Campos Valadares, Eduardo; Alves, Esdras Garcia

    2005-05-01

    Local "reversal of gravity" can be simulated with an inverted pendulum whose pivot is made to oscillate vertically. A beautiful demonstration of this surprising effect can be found in Ref. 1. In this case, the pendulum is a piece of plastic straw and its pivot pin is fixed at the end of a plastic ruler that is made to oscillate vertically by a small eccentric motor. A theoretical treatment of this inverted pendulum may be found in Ref. 2.

  6. Surf Aces Resurfaced

    DEFF Research Database (Denmark)

    Carter, Dale

    2013-01-01

    The rise of the American counter-culture between the early- to mid-1960s and early- to mid-1970s was closely associated with the growth of environmentalism. This article explores how both informed popular music, a form of expression which during these years became not only a prominent form of ent...

  7. Surfing on a herringbone

    Science.gov (United States)

    Soto, Dan; Lagubeau, Guillaume; Clanet, Christophe; Quéré, David

    2016-05-01

    Evaporation of a liquid on a hot solid can be exploited to induce both levitation and self-propulsion if the vapor flow under the liquid is made directional. Here we propose to force an anisotropic flow of vapor with a herringbone pattern at a solid surface. Liquids are found to self-propel on such hot materials, drawn by the underlying flow of vapor. The simplicity of the geometry allows us to predict the direction of vapor flow rectification, to quantitatively model the propulsion, and to discuss how the pattern must be designed to optimize both driving force and drop velocity.

  8. Surfing a Black Hole

    Science.gov (United States)

    2002-10-01

    Star Orbiting Massive Milky Way Centre Approaches to within 17 Light-Hours [1] Summary An international team of astronomers [2], lead by researchers at the Max-Planck Institute for Extraterrestrial Physics (MPE) , has directly observed an otherwise normal star orbiting the supermassive black hole at the center of the Milky Way Galaxy. Ten years of painstaking measurements have been crowned by a series of unique images obtained by the Adaptive Optics (AO) NAOS-CONICA (NACO) instrument [3] on the 8.2-m VLT YEPUN telescope at the ESO Paranal Observatory. It turns out that earlier this year the star approached the central Black Hole to within 17 light-hours - only three times the distance between the Sun and planet Pluto - while travelling at no less than 5000 km/sec . Previous measurements of the velocities of stars near the center of the Milky Way and variable X-ray emission from this area have provided the strongest evidence so far of the existence of a central Black Hole in our home galaxy and, implicitly, that the dark mass concentrations seen in many nuclei of other galaxies probably are also supermassive black holes. However, it has not yet been possible to exclude several alternative configurations. In a break-through paper appearing in the research journal Nature on October 17th, 2002, the present team reports their exciting results, including high-resolution images that allow tracing two-thirds of the orbit of a star designated "S2" . It is currently the closest observable star to the compact radio source and massive black hole candidate "SgrA*" ("Sagittarius A") at the very center of the Milky Way. The orbital period is just over 15 years. The new measurements exclude with high confidence that the central dark mass consists of a cluster of unusual stars or elementary particles, and leave little doubt of the presence of a supermassive black hole at the centre of the galaxy in which we live . PR Photo 23a/02 : NACO image of the central region of the Milky Way . PR Photo 23b/02 : NACO image of the central region of the Milky Way (close-up) . PR Photo 23c/02 : Orbit of the star "S2" around the central Black Hole. PR Video Clip 02/02 : Motion of "S2" and other stars around the central Black Hole. Quasars and Black Holes Ever since the discovery of the quasars (quasi-stellar radio sources) in 1963, astrophysicists have searched for an explanation of the energy production in these most luminous objects in the Universe. Quasars reside at the centres of galaxies, and it is believed that the enormous energy emitted by these objects is due to matter falling onto a supermassive Black Hole, releasing gravitational energy through intense radiation before that material disappears forever into the hole (in physics terminology: "passes beyond the event horizon" [4]). To explain the prodigious energy production of quasars and other active galaxies, one needs to conjecture the presence of black holes with masses of one million to several billion times the mass of the Sun. Much evidence has been accumulating during the past years in support of the above "accreting black hole" model for quasars and other galaxies, including the detection of dark mass concentrations in their central regions. However, an unambiguous proof requires excluding all possible other, non-black hole configurations of the central mass concentration. For this, it is imperative to determine the shape of the gravitational field very close to the central object - and this is not possible for the distant quasars due to technological limitations of the currently available telescopes. The centre of the Milky Way ESO PR Photo 23a/02 ESO PR Photo 23a/02 [Preview - JPEG: 400 x 427 pix - 95k [Normal - JPEG: 800 x 853 pix - 488k] Caption : PR Photo 23a/02 is a reproduction of an image of the innermost area of the Milky Way, only a few light-years across, obtained in mid-2002 with the NACO instrument [3] at the 8.2-m VLT YEPUN telescope. It combines frames in three infrared wavebands between 1.6 and 3.5 µm. The compact objects are stars and their colours indicate their temperature (blue = "hot", red = "cool"). There is also diffuse infrared emission from interstellar dust between the stars. The two yellow arrows mark the position of the black hole candidate "SgrA*" at the very centre of the Milky Way galaxy. The scale is indicated; the 1 light-year bar subtends an angle of 8 arcsec in the sky. The centre of our Milky Way galaxy is located in the southern constallation Sagittarius (The Archer) and is "only" 26,000 light-years away [5]. On high-resolution images, it is possible to discern thousands of individual stars within the central, one light-year wide region (this corresponds to about one-quarter of the distance to "Proxima Centauri", the star nearest to the solar system). Using the motions of these stars to probe the gravitational field, observations with the 3.5-m New Technology Telescope (NTT) at the ESO La Silla Observatory (Chile) (and subsequently at the 10-m Keck telescope , Hawaii, USA) over the last decade have shown that a mass of about 3 million times that of the Sun is concentrated within a radius of only 10 light-days [5] of the compact radio and X-ray source SgrA* ("Sagittarius A") at the center of the star cluster. This means that SgrA* is the most likely counterpart of the putative black hole and, at the same time, it makes the Galactic Center the best piece of evidence for the existence of such supermassive black holes . However, those earlier investigations could not exclude several other, non-black hole configurations. "We then needed even sharper images to settle the issue of whether any configuration other than a black hole is possible and we counted on the ESO VLT telescope to provide those" , explains Reinhard Genzel , Director at the Max-Planck Institute for Extraterrestrial Physics (MPE) in Garching near Munich (Germany) and member of the present team. "The new NAOS-CONICA (NACO) instrument, built in a close collaboration between our institute, the Max-Planck Institute for Astronomy (MPIA: Heidelberg, Germany), ESO and the Paris-Meudon and Grenoble Observatories (France), was just what we needed to take this decisive step forward" . The NACO observations of the Milky Way centre ESO PR Photo 23b/02 ESO PR Photo 23b/02 [Preview - JPEG: 400 x 618 pix - 82k] [Normal - JPEG: 800 x 1236 pix - 456k] ESO PR Photo 23c/02 ESO PR Photo 23c/02 [Preview - JPEG: 486 x 400 pix - 78k] [Normal - JPEG: 971 x 800 pix - 352k] ESO PR Video Clip 02/02 [MPEG] ESO PR Video Clip 02/02 [MPEG Video; 533 k] Caption : PR Photo 23b/02 shows an infrared NACO image of a ~ 2 x 2 arcsec 2 area, centred on the position of the compact radio source "SgrA*" at the centre of the Milky Way Galaxy; it is marked by a small cross. The image was obtained in the K s -band at wavelength 2.1 µm in May 2002 and the angular resolution (image sharpness) is about 0.060 arcsec. At about the same time, the star designated "S2" came within 0.015 arcsec of the radio source. At the distance of the Milky Way Center, 1 arcsec on the sky corresponds to 46 light-days [5]; the bar is 20 light-days long (0.44 arcsec). In PR Photo 23c/02 , "SgrA*" and S2 are identified in the left panel. The right panel displays the orbit of S2 as observed between 1992 and 2002, relative to SgrA* (marked with a circle). The positions of S2 at the different epochs are indicated by crosses with the dates (expressed in fractions of the year) shown at each point. The size of the crosses indicates the measurement errors. The solid curve is the best-fitting elliptical orbit - one of the foci is at the position of SgrA* . The 2002 data points come from NACO observations done during the early commissioning, fine adjustement, and Science Verification phases for this instrument; these data were promptly made public through the ESO Archive, cf. the NACO data webpage. PR Video Clip 02/02 was produced by the Max-Planck-Society and shows the observed motions of S2 and other stars in this area. The new NACO instrument [3] was installed in late 2001 at the VLT 8.2-m YEPUN telescope. Already during the initial tests, it produced many impressive images, some of which have been the subject of earlier ESO press releases [6]. "The first observations this year with NACO gave us right away the sharpest and 'deepest' images of the Milky Way Centre ever taken, showing a large number of stars in that area in great detail" , says Andreas Eckart of the University of Cologne, another member of the international team that is headed by Rainer Schödel, Thomas Ott and Reinhard Genzel from MPE. "But we were still to be overwhelmed by the wonderful outcome of those data! " Combining their infrared images with high-resolution radio data, the team was able to determine - during a ten-year period - very accurate positions of about one thousand stars in the central area with respect to the compact radio source SgrA* , see PR Photo 23c/02 . "When we included the latest NACO data in our analysis in May 2002, we could not believe our eyes. The star S2 , which is the one currently closest to SgrA*, had just performed a rapid swing-by near the radio source. We suddenly realised that we were actually witnessing the motion of a star in orbit around the central black hole, taking it incredibly close to that mysterious object" , says a very happy Thomas Ott , who is now working in the MPE team on his PhD thesis. In orbit around the central black hole No event like this one has ever been recorded . These unique data show unambiguously that S2 is moving along an elliptical orbit with SgrA* at one focus, i.e. S2 orbits SgrA* like the Earth orbits the Sun, cf. the right panel of PR Photo 23c/02 . The superb data also allow a precise determination of the orbital parameters (shape, size, etc.). It turns out that S2 reached its closest distance to SgrA* in the spring of 2002, at which moment it was only 17 light-hours [5] away from the radio source, or just 3 times the Sun-Pluto distance. It was then moving at more than 5000 km/s, or nearly two hundred times the speed of the Earth in its orbit around the Sun. The orbital period is 15.2 years. The orbit is rather elongated - the eccentricity is 0.87 - indicating that S2 is about 10 light-days away from the central mass at the most distant orbital point [7]. "We are now able to demonstrate with certainty that SgrA* is indeed the location of the central dark mass we knew existed. Even more important, our new data have "shrunk" by a factor of several thousand the volume within which those several million solar masses are contained" , says Rainer Schödel , PhD student at MPE and also first author of the resulting paper. In fact, model calculations now indicate that the best estimate of the mass of the Black Hole at the centre of the Milky Way is 2.6 ± 0.2 million times the mass of the Sun . No other possibilities According to the detailed analysis presented in the Nature article, other previously possible configurations, such as very compact clusters of neutron stars, stellar size black holes or low mass stars, or even a ball of putative heavy neutrinos, can now be definitively excluded. The only still viable non-black hole configuration is a hypothetical star of heavy elementary particles called bosons, which would look very similar to a black hole. "However" , says Reinhard Genzel , "even if such a boson star is in principle possible, it would rapidly collapse into a supermassive black hole anyhow, so I think we have pretty much clinched the case!" Next observations "Most astrophysicists would accept that the new data provide compelling evidence that a supermassive black hole exists in the center of the Milky Way. This makes even more likely the supermassive black hole interpretation for the enormous concentration of dark mass detected at the center of many other galaxies" , says Alvio Renzini , VLT Programme Scientist at ESO. So what remains to be done? The next big quest now is to understand when and how these supermassive black holes formed and why almost every massive galaxy appears to contain one. The formation of central black holes and that of their host galaxies themselves increasingly appear to be just one problem and the same. Indeed, one of the outstanding challenges for the VLT to solve in the next few years. There is also little doubt that coming interferometric observations with instruments at the VLT Interferometer (VLTI) and the Large Binocular Telescope (LBT) will also result in another giant leap within this exciting field of research. Andreas Eckart is optimistic: "Perhaps it will even be possible with X-ray and radio observations in the next few years to directly demonstrate the existence of the event horizon." More information The information presented in this Press Release is based on a research article ("Seeing a Star Orbit around the Supermassive Black Hole at the centre of the Milky Way" by Rainer Schödel et al.) that appears in the research journal "Nature" on October 17, 2002. Notes [1]: This press release is issued in coordination between ESO and the Max-Planck-Institute for Extraterrestrial Physics (MPE) in Garching, Germany. A German version is available at http://www.mpg.de/pri02/pri0287.htm. [2]: The team consists of Rainer Schödel, Thomas Ott, Reinhard Genzel, Reiner Hofmann and Matt Lehnert (Max-Planck-Institut für extraterrestrische Physik, Garching, Germany), Andreas Eckart and Nelly Mouawad (Physikalisches Institut, Universität zu Köln, Cologne, Germany), Tal Alexander (The Weizmann Institute of Science, Rehovot, Israel), Mark J. Reid (Harvard-Smithsonian Center for Astrophysics, Cambridge, Mass., USA), Rainer Lenzen and Markus Hartung (Max-Planck-Institut für Astronomie, Heidelberg, Germany), François Lacombe, Daniel Rouan, Eric Gendron and Gérard Rousset (Observatoire de Paris - Section de Meudon, France), Anne-Marie Lagrange (Laboratoire d'Astrophysique, Observatoire de Grenoble, France), Wolfgang Brandner, Nancy Ageorges, Chris Lidman, Alan F.M. Moorwood, Jason Spyromilio and Norbert Hubin (ESO) and Karl M. Menten (Max-Planck-Institut für Radioastronomie, Bonn, Germany). [3]: The NACO facility has two major components, CONICA and NAOS . The COudé Near-Infrared CAmera (CONICA) was developed by a German Consortium, with an extensive ESO collaboration. The Consortium consists of Max-Planck-Institut für Astronomie (MPIA) (Heidelberg) and the Max-Planck-Institut für Extraterrestrische Physik (MPE) (Garching). The Nasmyth Adaptive Optics System (NAOS) was developed, with the support of INSU-CNRS, by a French Consortium in collaboration with ESO. The French consortium consists of Office National d'Etudes et de Recherches Aérospatiales (ONERA) , Laboratoire d'Astrophysique de Grenoble (LAOG) and Observatoire de Paris (DESPA and DASGAL). [4]: In Albert Einstein's Theory of General Relativity, any mass has a characteristic radius, the "event horizon", or "Schwarzschild radius" named after the German astrophysicist Karl Schwarzschild . Within this radius, even light cannot escape the pull of the gravitational force. The radius for a 2.6 ± 0.2 million solar masses black hole (as the one at the centre of the Milky Way galaxy) is about 7.7 million km (26 light-seconds). [5]: Astronomical distances are often expressed in the time it takes the light, travelling at 300,000 km/sec, to cover them. 1 light-hour = 1.08 10 9 km; 1 light-day = 2.6 10 10 km; 1 light-month = 7.8 10 11 km; 1 light-year = 9.5 10 12 km. [6]: Earlier NACO images have been published in ESO PR 25/01 , ESO PR Photos 04a-c/02 , ESO PR Photos 19a-c/02 and ESO PR Photos 21a-c/02. [7]: S2 is an otherwise "normal" star, but some 15 times more massive and 7 times larger than the Sun. Its orbit around the Black Hole is comparatively stable. Even though it moves relatively close to the Black Hole in the present orbit, S2 would have to be at least 70 times closer (about 16 light-minutes from the Black Hole) before it would risk being disrupted by tidal forces. Astronomers refer to the extreme orbital points as "perenigricon" (closest to the Black Hole) and "aponigricon" (farthest away).

  9. Surfing China's National Defense

    Institute of Scientific and Technical Information of China (English)

    Ji Guilin

    2010-01-01

    @@ Following the start of its first test run on August 20, 2009, the website www.mod.gov.cn of the Ministry of National Defense (MOD) of the People's Republic of China has logged more than 2 billion hits,from many countries and regions including China, the United States,the United Kingdom, Japan, Australia and Singapore. China National Defense News reporters recently interviewed Ji Guilin, the website's Editor in Chief, on its performance and the feedback of netizens.

  10. Surf Aces Resurfaced

    DEFF Research Database (Denmark)

    Carter, Dale

    2013-01-01

    of entertainment but also a forum for cultural and social criticism. More particularly, through contextual and lyrical analyses of recordings by The Beach Boys, it identifies patterns of change and continuity in the articulation of counter-cultural, ecological and related sensibilities. During late 1966 and early......, what had formerly been considered high risk had by 1970 become good business as once-marginal environmentalism gained broader acceptability: thus did ‘America’s band’ articulate the flowering, greening and fading of the counter-culture.......The rise of the American counter-culture between the early- to mid-1960s and early- to mid-1970s was closely associated with the growth of environmentalism. This article explores how both informed popular music, a form of expression which during these years became not only a prominent form...

  11. Advanced thermal barrier coating systems

    Science.gov (United States)

    Dorfman, M. R.; Reardon, J. D.

    1985-01-01

    Current state-of-the-art thermal barrier coating (TBC) systems consist of partially stabilized zirconia coatings plasma sprayed over a MCrAlY bond coat. Although these systems have excellent thermal shock properties, they have shown themselves to be deficient for a number of diesel and aircraft applications. Two ternary ceramic plasma coatings are discussed with respect to their possible use in TBC systems. Zirconia-ceria-yttria (ZCY) coatings were developed with low thermal conductivities, good thermal shock resistance and improved resistance to vanadium containing environments, when compared to the baseline yttria stabilized zirconia (YSZ) coatings. In addition, dense zirconia-titania-yttria (ZTY) coatings were developed with particle erosion resistance exceeding conventional stabilized zirconia coatings. Both coatings were evaluated in conjunction with a NiCr-Al-Co-Y2O3 bond coat. Also, multilayer or hybrid coatings consisting of the bond coat with subsequent coatings of zirconia-ceria-yttria and zirconia-titania-yttria were evaluated. These coatings combine the enhanced performance characteristics of ZCY with the improved erosion resistance of ZTY coatings. Improvement in the erosion resistance of the TBC system should result in a more consistent delta T gradient during service. Economically, this may also translate into increased component life simply because the coating lasts longer.

  12. Aluminum phosphate coatings

    Science.gov (United States)

    Sambasivan, Sankar; Steiner, Kimberly A.; Rangan, Krishnaswamy K.

    2007-12-25

    Aluminophosphate compounds and compositions as can be used for substrate or composite films and coating to provide or enhance, without limitation, planarization, anti-biofouling and/or anti-microbial properties.

  13. Inorganic Coatings Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The inorganic Coatings Lab provides expertise to Navy and Joint Service platforms acquisition IPTs to aid in materials and processing choices which balance up-front...

  14. Friction surfaced Stellite6 coatings

    Energy Technology Data Exchange (ETDEWEB)

    Rao, K. Prasad; Damodaram, R. [Department of Metallurgical and Materials Engineering - Indian Institute of Technology Madras, Chennai 600 036 (India); Rafi, H. Khalid, E-mail: khalidrafi@gmail.com [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Ram, G.D. Janaki [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Reddy, G. Madhusudhan [Metal Joining Group, Defence Metallurgical Research Laboratory (DMRL) Kanchanbagh, Hyderabad 500 058 (India); Nagalakshmi, R. [Welding Research Institute, Bharat Heavy Electricals Limited, Tiruchirappalli 620 014 (India)

    2012-08-15

    Solid state Stellite6 coatings were deposited on steel substrate by friction surfacing and compared with Stellite6 cast rod and coatings deposited by gas tungsten arc and plasma transferred arc welding processes. Friction surfaced coatings exhibited finer and uniformly distributed carbides and were characterized by the absence of solidification structure and compositional homogeneity compared to cast rod, gas tungsten arc and plasma transferred coatings. Friction surfaced coating showed relatively higher hardness. X-ray diffraction of samples showed only face centered cubic Co peaks while cold worked coating showed hexagonally close packed Co also. - Highlights: Black-Right-Pointing-Pointer Stellite6 used as coating material for friction surfacing. Black-Right-Pointing-Pointer Friction surfaced (FS) coatings compared with casting, GTA and PTA processes. Black-Right-Pointing-Pointer Finer and uniformly distributed carbides in friction surfaced coatings. Black-Right-Pointing-Pointer Absence of melting results compositional homogeneity in FS Stellite6 coatings.

  15. Nanostructured Superhydrophobic Coatings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-03-01

    This factsheet describes a research project that deals with the nanostructured superhydrophobic (SH) powders developed at ORNL. This project seeks to (1) improve powder quality; (2) identify binders for plastics, fiberglass, metal (steel being the first priority), wood, and other products such as rubber and shingles; (3) test the coated product for coating quality and durability under operating conditions; and (4) application testing and production of powders in quantity.

  16. Spin coating apparatus

    Science.gov (United States)

    Torczynski, John R.

    2000-01-01

    A spin coating apparatus requires less cleanroom air flow than prior spin coating apparatus to minimize cleanroom contamination. A shaped exhaust duct from the spin coater maintains process quality while requiring reduced cleanroom air flow. The exhaust duct can decrease in cross section as it extends from the wafer, minimizing eddy formation. The exhaust duct can conform to entrainment streamlines to minimize eddy formation and reduce interprocess contamination at minimal cleanroom air flow rates.

  17. Coated 4340 Steel

    Science.gov (United States)

    2013-08-26

    alternative coatings qualified to MIL-PRE-23377 Class N and an electroplated zinc - nickel alloy passivated with a trivalent chromium solution which is...effect of a non-chromate primer and zinc - nickel plating with non-chromate passivation as alternatives to the chromate primer and cadmium plating with...NAWCADPAX/TR-2013/252 COATED 4340 STEEL by E. U. Lee C. Lei M. Stanley B. Pregger C. Matzdorf 26 August 2013

  18. MindSurf: a pilot study to assess the usability and acceptability of a smartphone app designed to promote contentment, wellbeing, and goal achievement.

    Science.gov (United States)

    Carey, Timothy A; Haviland, Jennifer; Tai, Sara J; Vanags, Thea; Mansell, Warren

    2016-12-12

    The Method of Levels (MOL) is a transdiagnostic cognitive therapy that promotes contentment, wellbeing, and goal achievement through the resolution of internal conflicts underlying psychological distress. MOL, based on Perceptual Control Theory (PCT), was developed in routine clinical practice and has been used effectively across different health services by different practitioners. Access to MOL-style questions through a smartphone app could, potentially, help both the general public maintain robust mental health, and also be a useful adjunct to therapy for clinical populations. The app is called MindSurf because of its focus on helping people explore their thinking. Prior to developing the app and using it with different populations it was necessary to determine whether such an idea would be usable for and acceptable to potential app users. Therefore, a pilot study was conducted with a non-clinical sample to assess the usability and acceptability of the app including monitoring whether the questions delivered in this way were associated with any adverse events. A pilot study using quantitative as well as qualitative methods and incorporating a repeated measures, A-B design was conducted. The 23 participants were healthy adult volunteers who were all either undergraduate students, postgraduate students, or staff of the University of Manchester. They received MOL-style questions on their mobile phones over a 1-week period. Qualitative results were encouraging and indicated that the format and style of questioning were acceptable to participants and did not lead to increased worry or concern. A one-way, repeated measures ANOVA indicated that there was a nonsignificant decrease in scores on the 21-item Depression, Anxiety, and Stress Scale (DASS21) over a 2 week period. The results of the pilot study justified development of MindSurf and further testing once it is available for use. A power analysis indicated that the pilot study was underpowered to detect

  19. Hydroxyapatite coatings for biomedical applications

    CERN Document Server

    Zhang, Sam

    2013-01-01

    Hydroxyapatite coatings are of great importance in the biological and biomedical coatings fields, especially in the current era of nanotechnology and bioapplications. With a bonelike structure that promotes osseointegration, hydroxyapatite coating can be applied to otherwise bioinactive implants to make their surface bioactive, thus achieving faster healing and recovery. In addition to applications in orthopedic and dental implants, this coating can also be used in drug delivery. Hydroxyapatite Coatings for Biomedical Applications explores developments in the processing and property characteri

  20. Residual stresses within sprayed coatings

    Institute of Scientific and Technical Information of China (English)

    JIANG Yi; XU Bin-shi; WANG Hai-dou

    2005-01-01

    Some important developments of residual stress researches for coating-based systems were studied. The following topics were included the sources of residual stresses in coatings: error analysis of Stoney's equation in the curvature method used for the measurement of coating residual stress, the modeling of residual stress and some analytical models for predicting the residual stresses in coatings. These topics should provide some important insights for the fail-safe design of the coating-based systems.

  1. Biocompatibility of Niobium Coatings

    Directory of Open Access Journals (Sweden)

    René Olivares-Navarrete

    2011-09-01

    Full Text Available Niobium coatings deposited by magnetron sputtering were evaluated as a possible surface modification for stainless steel (SS substrates in biomedical implants. The Nb coatings were deposited on 15 mm diameter stainless steel substrates having an average surface roughness of 2 mm. To evaluate the biocompatibility of the coatings three different in vitro tests, using human alveolar bone derived cells, were performed: cellular adhesion, proliferation and viability. Stainless steel substrates and tissue culture plastic were also studied, in order to give comparative information. No toxic response was observed for any of the surfaces, indicating that the Nb coatings act as a biocompatible, bioinert material. Cell morphology was also studied by immune-fluorescence and the results confirmed the healthy state of the cells on the Nb surface. X-ray diffraction analysis of the coating shows that the film is polycrystalline with a body centered cubic structure. The surface composition and corrosion resistance of both the substrate and the Nb coating were also studied by X-ray photoelectron spectroscopy and potentiodynamic tests. Water contact angle measurements showed that the Nb surface is more hydrophobic than the SS substrate.

  2. Un hombre llamado pez: la historia de Duke Kahanamoku, el nadador más rápido del mundo y el padre del surf moderno. [A Man Called Fish: the History of Duke Kahanamoku, the fastest swimmer of the World and the father of modern surfing].

    Directory of Open Access Journals (Sweden)

    Daniel Esparza

    2014-10-01

    Full Text Available Duke Kahanamoku (1890-1968 forma parte del Salón de la Fama de la natación, y también del Salón de la Fama del surf. Es la única persona que tiene ese doble mérito. Las razones no son difíciles de entender: fue el nadador más rápido de entre los humanos hasta que llegó otro que no lo era: Tarzán, o mejor dicho, Johnny Weissmüller; y en cuanto al arte de montar las olas tuvo el mérito de expandir por otros mares y océanos esa actividad milenaria surgida en el Hawái arcaico hasta el punto de ser considerado por casi todos el padre del surf moderno. ¿Cuáles fueron sus éxitos en la natación? ¿Qué había de innovador en su técnica que le hizo el más rápido? ¿Cómo expandió el surf al mismo tiempo que realizaba exhibiciones de natación? ¿De qué energía carismática estaba dotado este hombre, que hasta el propio JFK en su visita a Honolulu en 1962 se saltó absolutamente todo el protocolo entre las autoridades norteamericanas para dirigirse directamente hacia él y saludarle efusivamente? He aquí su historia.

  3. Controlled Thermal Expansion Coat for Thermal Barrier Coatings

    Science.gov (United States)

    Brindley, William J. (Inventor); Miller, Robert A. (Inventor); Aikin, Beverly J. M. (Inventor)

    1999-01-01

    A improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coating includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX, and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer, or a diameter of less than 5 microns. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention, the first bond coat layer is applied to the substrate, and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of die invention, a ceramic insulating layer covers the second bond coat layer.

  4. Local Environment Recognition System Using Modified SURF-Based 3D Panoramic Environment Map for Obstacle Avoidance of a Humanoid Robot

    Directory of Open Access Journals (Sweden)

    Tae-Koo Kang

    2013-06-01

    Full Text Available This paper addresses a local environment recognition system for obstacle avoidance. In vision systems, obstacles that are located beyond the Field of View (FOV cannot be detected precisely. To deal with the FOV problem, we propose a 3D Panoramic Environment Map (PEM using a Modified SURF algorithm (MSURF. Moreover, in order to decide the avoidance direction and motion automatically, we also propose a Complexity Measure (CM and Fuzzy-Logic-based Avoidance Motion Selector (FL-AMS. The CM is utilized to decide an avoidance direction for obstacles. The avoidance motion is determined using FL-AMS, which considers environmental conditions such as the size of obstacles and available space. The proposed system is applied to a humanoid robot built by the authors. The results of the experiment show that the proposed method can be effectively applied to a practical environment.

  5. Effect of Coated PHB on Properties of Abradable Seal Coating

    Institute of Scientific and Technical Information of China (English)

    CHENG Xudong; XIANG Hongyu; YE Weiping; MENG Xiaoming; MIN Jie; LIU Minzhi; ZHANG Pu; LU Wei

    2014-01-01

    As pore-forming materials, the coated poly-p-hydroxybenzoate(short for PHB) and h-BN can be applied in the preparation of abradable seal coatings at high temperature. The characteristics of coating such as morphology, thermal stability and composition were studied by SEM, EDS and FTIR. The results show that the modified PHB will change the remained carbon amount, porosity and pore morphology of the coating, which can affect the properties of coatings. If the pore is small enough in uniform distribution, the coating with 5 MPa bond strength, 30-55 HR45Y superficial hardness and certain of carbon can be suitable to well abradability.

  6. Preliminary assessment of surf-zone and estuarine line-fish species of the Dwesa-Cwebe Marine Protected Area, Eastern Cape, South Africa

    Directory of Open Access Journals (Sweden)

    Jan A. Venter

    2012-09-01

    Full Text Available A preliminary assessment of surf-zone and estuarine line fish was carried out in the DwesaCwebe Marine Protected Area (MPA, on the Wild Coast, South Africa. The purpose was to provide baseline data on inshore line-fish stocks in the MPA. A total of 28 species was recorded, of which 53% have a conservation status reflecting some concern and 43% are endemic to southern Africa. This highlights the value of the MPA for protection of important line-fish species. Within the MPA, localised differences were detected in species diversity, size frequency and catch per unit effort between unexploited and illegally exploited areas. These differences were more prominent in slow growing, long-lived species. It thus appears that illegal exploitation is negatively affecting fish populations within the MPA, which counteract and potentially could eliminate the benefits of fish protection typically associated with no-take MPAs. These results highlight the need for improved law enforcement and better communication with neighbouring communities to increase awareness. It is further recommended that the current no-take status of the MPA should be maintained. In addition, baseline fisheries information was collected on certain fish species that could be used to inform future conservation management of the MPA.Conservation implications: The Dwesa-Cwebe Marine Protected Area is unique and important for the conservation of key surf zone and estuarine fish species. However there is a significant risk to the fish populations due to illegal exploitation. Key interventions should include enhanced law enforcement but, more important, the creation of alternative livelihoods and long term sustainable benefits to local communities.

  7. Research on Sonar Image Registration and Fusion Based on SURF Algorithm%基于SURF的声纳图像配准与融合方法研究

    Institute of Scientific and Technical Information of China (English)

    郭军

    2013-01-01

    针对侧扫声纳图像分辨率高测深精度低而多波束声纳图像分辨率低测深精度高的特点,提出了一种基于SUFR的声纳图像自动配准与融合方法.该算法检测同一区域内侧扫声纳图像和多波束图像的特征点,通过最近邻匹配获得匹配点后,计算图像间的变换矩阵,利用空间变换完成配准,采用加权融合法实现两者的融合.实验结果表明该算法具有很好的鲁棒性,配准精度达到像素级,可实现两者的高精度自动配准与融合,取得了理想的效果.%According to multi - beam sonar system, the high - resolution backscatter but poor horizontal position accuracy, and side -scan sonar system, the accurate bathymetry and horizontal position but low resolution, the study is concerned with an automatic registration and fusion method of sonar image based on SURF. To achieve the integration of multi - beam sonar system and side - scan sonar system with the weighted fusion method, it extracts feature points by using SURF, computes transformation matrix by using match points, and performs registration and fusion with a spatial transform. The results indicate that this method is robust and stable with registration accuracy up to pixel level realizing the quite precise automatic registration and fusion, and is more suitable for sonar image.

  8. 改进SURF算法的图像拼接算法研究%An image stitching algorithm based on improved SURF algorithm

    Institute of Scientific and Technical Information of China (English)

    马林伟; 朱国魂

    2014-01-01

    针对目前图像拼接算法存在对于图像配准过程中对应特征点对难以准确匹配的问题,提出了一个通过改进的 SURF 算法提取图像特征点,然后对得到的特征点进行描述,利用快速RANSAC 算法配准图像,最后采用像素加权的方法进行图像融合。实验结果表明,提出的改进 SURF方法有效地提高了特征点提取的准确性,去除了错误的匹配点对,将整个拼接过程的效率从之前的13.03对/秒提升到15.20对/秒。%Image stitching is mainly used in aerial image processing, medical image analysis, virtual reality technology, computer vision, etc. For image registration, the difficult is to accurately extract the corresponding feature points. This paper puts forward a kind of algorithm based on improved SURF algorithm to extract image feature points, and then describes the feature points, using the RANSAC algorithm to registration the image. Finally, it uses the method of weighted pixel in image fusion. The experiment results show that this method improved the accuracy of feature extract, wipe out the wrong matching points, and improved the processing of stitching from 13.03/s to 15.20/s.

  9. 基于SIFT,PCA-SIFT和SURF特征检测方法的研究%Based on SIFT,PCA-SIFT and SURF Feature Detection Method Research

    Institute of Scientific and Technical Information of China (English)

    李宏荣; 李晓明

    2012-01-01

    To study features,we compared with SIFT(Scale Invariant Feature Transform),PCA-SIFT(Principal Component Analysis Scale Invariant Feature Transform)and SURF(Speeded Up Robust Features)three kinds of robust feature detection method.We use KNN(K-Nearest Neighbor)and random sampling method of these three kinds of methods for analysis.Where KNN used to seek matching pairs,random sampling for removing errors from match to match.Feature detection performance robustness is the image rotation,image blurring,illumination variation,the scale change of the image.The experimental evaluation is the use of repetition rate and the number of correct matching of the two statistical methods.In a variety of image transform in SIFT and SURF performance is consistent,but also has faster calculation speed.PCA-SIFT in the image rotation and illumination changes provides a better performance.%文章对SIFT,PCA-SIFT和SURF三种鲁棒性较强的特征检测方法作对比.文中运用KNN(K-Nearest Neighbor)和RANSAC的方法对这三种方法进行分析.其中KNN用于寻求匹配对,RANSAC用于从匹配对中剔除错误匹配.特征检测性能的鲁棒性主要是对图像旋转、图像模糊、光照变化、尺度变化下的图像进行测试.在各种图像变换中SIFT都体现出了稳定性,但计算速度相对比较慢.SURF不仅与SIFT的性能相一致,而且还拥有较快的计算速度.PCA-SIFT在图像旋转和光照变化中有较好的性能.

  10. A Research on Monocular Visual SLAM Based on SURF Feature%基于SURF特征的单目视觉SLAM方法研究∗

    Institute of Scientific and Technical Information of China (English)

    胡衡; 梁岚珍

    2015-01-01

    Because the visual information is easily affected by external environment factors, therefore the selected feature points of mobile robot based on visual simultaneous localization and map building requires high stability and good robustness. For the problem of monocular visual mobile robot SLAM(Simultaneous Localization and Mapping),a kind of mono-SLAM algorithm based on Extended kalman filter is proposed by using SURF(Speed Up Robust Features) feature points and the inverse depth method. The process of SLAM is completed by fusing the information of SURF features and robot information with EKF. The result of simulation experiment indicates that the proposed algorithm is feasible, and with high localization precision in indoor structured environment.%由于视觉信息很容易受到外界环境因素的影响,因此基于视觉的移动机器人同步定位与地图构建问题所选取的特征点要求具有较高的精确度和良好的鲁棒性。针对单目SLAM问题,提出一种基于扩展卡尔曼滤波器的单目视觉SLAM算法。该算法采用SURF特征点,结合反向深度估计法,应用扩展卡尔曼滤波器融合SURF特征信息与机器人位姿信息完成SLAM过程。仿真实验结果表明,在未知室内结构化环境下,该算法运行可靠,定位精度高。

  11. Time-of-flight secondary ion mass spectrometry (ToF-SIMS)-based analysis and imaging of polyethylene microplastics formation during sea surf simulation.

    Science.gov (United States)

    Jungnickel, H; Pund, R; Tentschert, J; Reichardt, P; Laux, P; Harbach, H; Luch, A

    2016-09-01

    Plastic particles smaller than 5mm, so called microplastics have the capability to accumulate in rivers, lakes and the marine environment and therefore have begun to be considered in eco-toxicology and human health risk assessment. Environmental microplastic contaminants may originate from consumer products like body wash, tooth pastes and cosmetic products, but also from degradation of plastic waste; they represent a potential but unpredictable threat to aquatic organisms and possibly also to humans. We investigated exemplarily for polyethylene (PE), the most abundant constituent of microplastic particles in the environment, whether such fragments could be produced from larger pellets (2mm×6mm). So far only few analytical methods exist to identify microplastic particles smaller than 10μm, especially no imaging mass spectrometry technique. We used at first time-of-flight secondary ion mass spectrometry (ToF-SIMS) for analysis and imaging of small PE-microplastic particles directly in the model system Ottawa sand during exposure to sea surf simulation. As a prerequisite, a method for identification of PE was established by identification of characteristic ions for PE out of an analysis of grinded polymer samples. The method was applied onto Ottawa sand in order to investigate the influence of simulated environmental conditions on particle transformation. A severe degradation of the primary PE pellet surface, associated with the transformation of larger particles into smaller ones already after 14days of sea surf simulation, was observed. Within the subsequent period of 14days to 1month of exposure the number of detected smallest-sized particles increased significantly (50%) while the second smallest fraction increased even further to 350%. Results were verified using artificially degraded PE pellets and Ottawa sand.

  12. Alternative RPC Coatings

    Science.gov (United States)

    Strack, Jason

    2009-10-01

    The nuclear physics group at the University of Illinois is currently developing techniques to further improve the performance of Bakelite Resistive Plate Chambers (RPCs) for use as muon trigger detectors in experiments at hadron colliders. Muon trigger RPCs at LHC and RHIC typically use Bakelite plates coated with linseed oil. Both Bakelite and linseed oil, however, have high bulk and surface resistivity thus limiting the detection efficiency of the RPC at high rates. Experiments which dope the linseed oil with either carbon or copper are carried out with the goal to select targeted lower surface resistivity values for the coating applied to the Bakelite plates. Two doping procedures have been studied. In the first method a thin layer of graphite is deposited between the Bakelite and the linseed oil. For the second method the graphite or copper powder are deposited on top of the drying linseed oil coating. In this presentation the coating methods will be discussed and the effects of the coating on the RPC position resolution, cluster size and efficiencies will be discussed.

  13. Coatings for directional eutectics

    Science.gov (United States)

    Rairden, J. R.; Jackson, M. R.

    1976-01-01

    Coatings developed to provide oxidation protection for the directionally-solidified eutectic alloy NiTaC-B (4.4 weight percent Cr) were evaluated. Of seven Co-, Fe- and Ni-base coatings that were initially investigated, best resistance to cyclic oxidation was demonstrated by duplex coatings fabricated by depositing a layer of NiCrAl(Y) by vacuum evaporation from an electron beam source followed by deposition of an Al overlayer using the pack cementation process. It was found that addition of carbon to the coating alloy substantially eliminated the problem of fiber denudation in TaC-type eutectic alloys. Burner rig cycled NiTaC-B samples coated with Ni-20Cr-5Al-0.1C-0.1Y+Al and rupture-tested at 1100 deg C performed as well as or better than uncoated, vacuum cycled and air-tested NiTaC-13; however, a slight degradation with respect to uncoated material was noted in air-stress rupture tests at 870 deg C for both cycled and uncycled samples.

  14. Based Adaptive Nanocomposite Coatings

    Science.gov (United States)

    Ramazani, M.; Ashrafizadeh, F.; Mozaffarinia, R.

    2014-08-01

    A promising Ni(Al)-Cr2O3-Ag-CNT-WS2 self-lubricating wear-resistant coating was deposited via atmospheric plasma spray of Ni(Al), nano Cr2O3, nano silver and nano WS2 powders, and CNTs. Feedstock powders with various compositions prepared by spray drying were plasma sprayed onto carbon steel substrates. The tribological properties of coatings were tested by a high temperature tribometer in a dry environment from room temperature to 400 °C, and in a natural humid environment at room temperature. It was found that all nanocomposite coatings have better frictional behavior compared with pure Ni(Al) and Ni(Al)-Cr2O3 coatings; the specimen containing aproximately 7 vol.% Ag, CNT, and WS2 had the best frictional performance. The average room temperature friction coefficient of this coating was 0.36 in humid atmosphere, 0.32 in dry atmosphere, and about 0.3 at high temperature.

  15. Preliminary coating design and coating developments for ATHENA

    DEFF Research Database (Denmark)

    Jakobsen, Anders Clemen; Ferreira, Desiree Della Monica; Christensen, Finn Erland

    2011-01-01

    We present initial novel coating design for ATHENA. We make use of both simple bilayer coatings of Ir and B4C and more complex constant period multilayer coatings to enhance the effective area and cover the energy range from 0.1 to 10 keV. We also present the coating technology used for these des......We present initial novel coating design for ATHENA. We make use of both simple bilayer coatings of Ir and B4C and more complex constant period multilayer coatings to enhance the effective area and cover the energy range from 0.1 to 10 keV. We also present the coating technology used...

  16. Bioceramics for implant coatings

    Directory of Open Access Journals (Sweden)

    Allison A Campbell

    2003-11-01

    Early research in this field focused on understanding the biomechanical properties of metal implants, but recent work has turned toward improving the biological properties of these devices. This has led to the introduction of calcium phosphate (CaP bioceramics as a bioactive interface between the bulk metal impart and the surrounding tissue. The first CaP coatings were produced via vapor phase processes, but more recently solution-based and biomimetic methods have emerged. While each approach has its own intrinsic materials and biological properties, in general CaP coatings promise to improve implant biocompatibility and ultimately implant longevity.

  17. Advanced Coating Removal Techniques

    Science.gov (United States)

    Seibert, Jon

    2006-01-01

    An important step in the repair and protection against corrosion damage is the safe removal of the oxidation and protective coatings without further damaging the integrity of the substrate. Two such methods that are proving to be safe and effective in this task are liquid nitrogen and laser removal operations. Laser technology used for the removal of protective coatings is currently being researched and implemented in various areas of the aerospace industry. Delivering thousands of focused energy pulses, the laser ablates the coating surface by heating and dissolving the material applied to the substrate. The metal substrate will reflect the laser and redirect the energy to any remaining protective coating, thus preventing any collateral damage the substrate may suffer throughout the process. Liquid nitrogen jets are comparable to blasting with an ultra high-pressure water jet but without the residual liquid that requires collection and removal .As the liquid nitrogen reaches the surface it is transformed into gaseous nitrogen and reenters the atmosphere without any contamination to surrounding hardware. These innovative technologies simplify corrosion repair by eliminating hazardous chemicals and repetitive manual labor from the coating removal process. One very significant advantage is the reduction of particulate contamination exposure to personnel. With the removal of coatings adjacent to sensitive flight hardware, a benefit of each technique for the space program is that no contamination such as beads, water, or sanding residue is left behind when the job is finished. One primary concern is the safe removal of coatings from thin aluminum honeycomb face sheet. NASA recently conducted thermal testing on liquid nitrogen systems and found that no damage occurred on 1/6", aluminum substrates. Wright Patterson Air Force Base in conjunction with Boeing and NASA is currently testing the laser remOval technique for process qualification. Other applications of liquid

  18. Active Packaging Coatings

    Directory of Open Access Journals (Sweden)

    Luis J. Bastarrachea

    2015-11-01

    Full Text Available Active food packaging involves the packaging of foods with materials that provide an enhanced functionality, such as antimicrobial, antioxidant or biocatalytic functions. This can be achieved through the incorporation of active compounds into the matrix of the commonly used packaging materials, or by the application of coatings with the corresponding functionality through surface modification. The latter option offers the advantage of preserving the packaging materials’ bulk properties nearly intact. Herein, different coating technologies like embedding for controlled release, immobilization, layer-by-layer deposition, and photografting are explained and their potential application for active food packaging is explored and discussed.

  19. HA-Coated Implant

    DEFF Research Database (Denmark)

    Daugaard, Henrik; Søballe, Kjeld; Bechtold, Joan E

    2014-01-01

    The goal of osseointegration of orthopedic and dental implants is the rapid achievement of a mechanically stable and long lasting fixation between living bone and the implant surface. In total joint replacements of cementless designs, coatings of calcium phosphates were introduced as a means...... of improving the fixation of implants. Of these, hydroxyapatite (HA) is the most widely used and most extensively investigated. HA is highly osseoconductive, and the positive effect is well documented in both basic and long-term clinical research [1–6]. This chapter describes experimental and clinical studies...... evaluating bone-implant fixation with HA coatings....

  20. Tribology and coatings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The future use of fuel-efficient, low-emission, advanced transportation systems (for example, those using low-heat-rejection diesel engines or advanced gas turbines) presents new challenges to tribologists and materials scientists. High service temperatures, corrosive environments, and extreme contact pressures are among the concerns that make necessary new tribological designs, novel materials, and effective lubrication concepts. Argonne is working on methods to reduce friction, wear and corrosion, such as soft metal coatings on ceramics, layered compounds, diamond coatings, and hard surfaces.

  1. Preparation of hydrophobic coatings

    Science.gov (United States)

    Branson, Eric D.; Shah, Pratik B.; Singh, Seema; Brinker, C. Jeffrey

    2009-02-03

    A method for preparing a hydrophobic coating by preparing a precursor sol comprising a metal alkoxide, a solvent, a basic catalyst, a fluoroalkyl compound and water, depositing the precursor sol as a film onto a surface, such as a substrate or a pipe, heating, the film and exposing the film to a hydrophobic silane compound to form a hydrophobic coating with a contact angle greater than approximately 150.degree.. The contact angle of the film can be controlled by exposure to ultraviolet radiation to reduce the contact angle and subsequent exposure to a hydrophobic silane compound to increase the contact angle.

  2. Methods and means for coating paper by film coating

    NARCIS (Netherlands)

    van der Maarel, Marc; Ter Veer, Arend Berend Cornelis; Vrieling-Smit, Annet; Delnoye, Pierre

    2015-01-01

    This invention relates to the field of paper coating, more in particular to means and methods for providing paper with at least one layer of pigment using film coating to obtain a well printable surface. Provided is a method for preparing coated paper comprising the steps of: a) providing a pigmente

  3. Thermal barrier coating for alloy systems

    Science.gov (United States)

    Seals, Roland D.; White, Rickey L.; Dinwiddie, Ralph B.

    2000-01-01

    An alloy substrate is protected by a thermal barrier coating formed from a layer of metallic bond coat and a top coat formed from generally hollow ceramic particles dispersed in a matrix bonded to the bond coat.

  4. Optical coatings for fiber lasers

    Institute of Scientific and Technical Information of China (English)

    HONG Dong-mei; ZHU Zhen; YUE Wei

    2005-01-01

    Fiber laser is the future development direction for the high energy lasers. This paper describs two kinds of optical coatings for fiber laser, including long and short wave pass filters. The one characteristic of fiber laser coatings lies in that coatings should separate two closely wavelength light including laser pump wavelength (980 nm) and laser irradiation wavelength(1 050~1 100 nm). At the same time, the coatings should have high laser damage threshold.

  5. Coatings and Tints of Spectacle Lenses

    OpenAIRE

    H. Zeki Büyükyıldız

    2012-01-01

    Spectacle lenses are made of mineral or organic (plastic) materials. Various coatings and tints are applied to the spectacle lenses according to the characteristic of the lens material, and for the personal needs and cosmetic purpose. The coatings may be classified in seven groups: 1) Anti-reflection coatings, 2) Hard coatings, 3) Clean coat, 4) Mirror coatings, 5) Color tint coating (one of coloring processes), 6) Photochromic coating (one of photochromic processes), and 7) Anti-fog...

  6. Tribological characterization of selected hard coatings

    OpenAIRE

    Karlsson, Patrik

    2009-01-01

    Hard coatings are often used for protection of tool surfaces due to coating properties like low friction and high wear resistance. Even though many of the hard coatings have been tested for wear, it is important to try new wear test setups to fully understand tribological mechanisms and the potential of hard coatings. Few experiments have been performed with dual-coated systems where the sliding contact surfaces are coated with the same, or different, hard coating. The dual-coated system coul...

  7. Rotatable fixture for spray coating

    Science.gov (United States)

    Katvala, V.; Porter, E.; Smith, M.

    1979-01-01

    Fixture that rotates about two axes ensures uniform coating and minimizes handling of coated workpiece. Each side of tile is coated in sequence by moving turntables until surface is perpendicular to spray. Process is repeated until desired thickness has built up.

  8. Coatings for transport industry

    Directory of Open Access Journals (Sweden)

    Krzysztof LUKASZKOWICZ

    2014-09-01

    Full Text Available The investigations concerned structural analysis, as well as mechanical properties and wear resistant of MeN/DLC double-layer coating deposited by hybrid PVD/PACVD method. In sliding dry friction conditions, after the break-in time, the friction coefficient for the investigated elements is set in the range between 0.03-0.06.

  9. Chitin-based coatings

    OpenAIRE

    1995-01-01

    A chitosan starting material is combined with a dilute organic acid to produce a chitosonium ion complex. The chitosonium ion complex is then cast, sprayed, extruded, or otherwise processed to produce filaments, coatings, fibers, or the like. Heat is then used to convert the chitosonium ion complex into a N-(C.sub.1-30)acyl glucose amine polymer.

  10. Metallography of Aluminide Coatings

    Science.gov (United States)

    1991-05-01

    Aero-Space Technologies Australia, Systems Division Librarian Ansett Airlines of Australia, Library Australian Airlines, Library Qantas Airways Limited...Fink, R, W. Heakel. " Analysis of Microstructural Change due to Cyclic Oxidation in Aluminilde-coated NI-Al. NI-Cr and NI-Cr-Al Alloys". High Temperature

  11. ATHENA optimized coating design

    DEFF Research Database (Denmark)

    Ferreira, Desiree Della Monica; Christensen, Finn Erland; Jakobsen, Anders Clemen

    2012-01-01

    The optimization of coating design for the ATHENA mission si described and the possibility of increasing the telescope effective area in the range between 0.1 and 10 keV is investigated. An independent computation of the on-axis effective area based on the mirror design of ATHENA is performed in ...

  12. Thermoplastic coating of carbon fibers

    Science.gov (United States)

    Edie, D. D.; Lickfield, G. C.; Drews, M. J.; Ellison, M. S.; Gantt, B. W.

    1989-01-01

    A process is being developed which evenly coats individual carbon fibers with thermoplastic polymers. In this novel, continuous coating process, the fiber tow bundle is first spread cover a series of convex rollers and then evenly coated with a fine powder of thermoplastic matrix polymer. Next, the fiber is heated internally by passing direct current through the powder coated fiber. The direct current is controlled to allow the carbon fiber temperature to slightly exceed the flow temperature of the matrix polymer. Analysis of the thermoplastic coated carbon fiber tows produced using this continuous process indicates that 30 to 70 vol pct fiber prepregs can be obtained.

  13. Infrared optical coatings in SITP

    Institute of Scientific and Technical Information of China (English)

    LIU Ding-quan; ZHANG Feng-shan

    2005-01-01

    Infrared optical coatings in SITP (Shanghai Institute of Technical Physics) mainly cover the spectrum range from 0.7 μm to 15 μm, and visible and near-UV range are also been included. The coatings are mainly used for metal-reflectance mirrors, Anti-reflection(AR) lens and windows, filters, and dichroic beam splitters. Coatings passed some dependability tests. These optical coated devices usually consist in a remote observing instrument. Most coating materials are commercial products. And one kind of special material PbTe is made by ourselves. Some main results of our research department are reported.

  14. Coatings for improved corrosion resistance

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K.

    1992-05-01

    Several coating approaches are being developed to resist attack in coal-fired environments and thereby minimize corrosion of underlying substrate alloys and extend the time for onset of breakaway corrosion. In general, coating systems can be classified as either diffusion or overlay type, which are distinguished principally by the method of deposition and the structure of the resultant coating-substrate bond. The coating techniques examined are pack cementation, electrospark deposition, physical and chemical vapor deposition, plasma spray, and ion implantation. In addition, ceramic coatings are used in some applications.

  15. Thermoplastic coating of carbon fibers

    Science.gov (United States)

    Edie, D. D.; Lickfield, G. C.; Drews, M. J.; Ellison, M. S.; Gantt, B. W.

    1989-01-01

    A process is being developed which evenly coats individual carbon fibers with thermoplastic polymers. In this novel, continuous coating process, the fiber tow bundle is first spread cover a series of convex rollers and then evenly coated with a fine powder of thermoplastic matrix polymer. Next, the fiber is heated internally by passing direct current through the powder coated fiber. The direct current is controlled to allow the carbon fiber temperature to slightly exceed the flow temperature of the matrix polymer. Analysis of the thermoplastic coated carbon fiber tows produced using this continuous process indicates that 30 to 70 vol pct fiber prepregs can be obtained.

  16. Spatially constrained SURF feature point matching for UAV images%空间约束的无人机影像SURF特征点匹配

    Institute of Scientific and Technical Information of China (English)

    韩天庆; 赵银娣; 刘善磊; 白杨

    2013-01-01

    Compared with general scene images,unmanned aerial vehicle (UAV) images provide richer texture information,and often there are more serious problems for the one-to-many correspondence between local features and target objects.The traditional speeded-up robust features (SURF) algorithm would be inapplicable to UAV images.Therefore,an improved spatially constrained SURF method is proposed for UAV image matching and mosaicking.In the first feature point matching phase,SURF feature points are extracted from the whole base image and the blocks of the target image,respectively,a cosine-based spatial constraint relationship is built using the selected two pairs of points and imposed on the feature point dual matching process between the central block in the target image and the base image.In the second phase,the initial parameters of geometric transformation are calculated using the feature point points obtained in the first phase and used to estimate locations in the base image corresponding to points in the target image.For each feature point in the target image,point matching just need to be done within the neighborhood of the estimated locations so as to ensure matching efficiency and reliability.Meanwhile,uniformly distributed feature points are achieved with the constraint of point intensity.Finally,the obtained feature points are used for UAV image registration and mosaicking.The performance is compared with the manually selected points that are uniformly distributed.Experimental results illustrate the validity of the presented method.%与普通场景图像相比,无人机影像中纹理信息较丰富,局部特征与目标对象“一对多”的对应问题更加严重,经典SURF算法不适用于无人机影像的特征点匹配.为此,提出一种辅以空间约束的SURF特征点匹配方法,并应用于无人机影像拼接.该方法对基准影像整体提取SURF特征点,对目标影像分块提取SURF特征点,在特征点双向匹配过程中使用两特

  17. Methods for Coating Particulate Material

    Science.gov (United States)

    Littman, Howard (Inventor); Plawsky, Joel L. (Inventor); Paccione, John D. (Inventor)

    2013-01-01

    Methods and apparatus for coating particulate material are provided. The apparatus includes a vessel having a top and a bottom, a vertically extending conduit having an inlet in the vessel and an outlet outside of the vessel, a first fluid inlet in the bottom of the vessel for introducing a transfer fluid, a second fluid inlet in the bottom of the vessel for introducing a coating fluid, and a fluid outlet from the vessel. The method includes steps of agitating a material, contacting the material with a coating material, and drying the coating material to produce a coated material. The invention may be adapted to coat aerogel beads, among other materials. A coated aerogel bead and an aerogel-based insulation material are also disclosed.

  18. BIODEGRADABLE COATING FROM AGATHIS ALBA

    Directory of Open Access Journals (Sweden)

    NORYAWATI MULYONO

    2012-11-01

    Full Text Available The adhesive property of copal makes it as a potential coating onto aluminum foil to replace polyethylene. This research aimed to develop copal-based coating. The coating was prepared by extracting the copal in ethyl acetate and dipping the aluminium foil in ethyl acetate soluble extract of copal. The characterization of coating included its thickness, weight, thermal and chemical resistance, and biodegradation. The results showed that the coating thickness and weight increased as the copal concentration and dipping frequency increased. Thermal resistance test showed that the coating melted after being heated at 110°C for 30 min. Copal-based coating wasresistant to acidic solution (pH 4.0, water, and coconut oil, but was deteriorated in detergent 1% (w/v and basic solution (pH 10.0. Biodegradability test using Pseudomonas aeruginosa showed weight reduction of 76.82% in 30 days.

  19. Image matching method based on image contrast enhancement of SURF%一种基于雾天图像增强的SURF图像匹配方法

    Institute of Scientific and Technical Information of China (English)

    李骥; 莫小锋; 王威; 杨蔚蔚

    2015-01-01

    In the geological disaster monitoring system, the image change detection can be used to monitor the occurred disaster. Image matching is needed to change detection accurately. Aiming at the problem of low matching precision with the image in the fog condition, an image matching method based on image contrast enhancement of SURF is proposed, enhanceing the matching precision of the fog image efficiently. It uses multi-scale Retinex algorithm to enhance the fog image, and then completes the extraction of feature points with SURF algorithm, uses Euclidean distance to measure the similarity of characteristic points, according to the similarity triangular distance ratio invariance, it deletes point pairs of mismatch. Experimental results show that the method significantly improves the precision of image feature points match-ing, provides a good foundation for subsequent use of image change detection for disaster monitoring.%在地质灾害监测系统中,可以通过图像的变化检测对发生的灾害进行监测。要精确地进行变化检测,需要首先对图像进行匹配。针对雾天图像匹配精度低的问题,提出了一种基于雾天图像增强的SURF(Speed Up Robust Feature)图像匹配方法,有效地提高了雾天图像的匹配精度。用MSR(Multi Scale Retinex)算法对雾天图像进行增强处理,采用SURF算法完成特征点的提取,用欧式距离来度量特征点的相似度,根据相似三角形的距离比例不变性删除误匹配的点对。实验结果表明,该方法显著提高了图像特征点的匹配精度,为后续利用图像变化检测进行灾害监测提供了良好的基础。

  20. Flow accelerated organic coating degradation

    Science.gov (United States)

    Zhou, Qixin

    Applying organic coatings is a common and the most cost effective way to protect metallic objects and structures from corrosion. Water entry into coating-metal interface is usually the main cause for the deterioration of organic coatings, which leads to coating delamination and underfilm corrosion. Recently, flowing fluids over sample surface have received attention due to their capability to accelerate material degradation. A plethora of works has focused on the flow induced metal corrosion, while few studies have investigated the flow accelerated organic coating degradation. Flowing fluids above coating surface affect corrosion by enhancing the water transport and abrading the surface due to fluid shear. Hence, it is of great importance to understand the influence of flowing fluids on the degradation of corrosion protective organic coatings. In this study, a pigmented marine coating and several clear coatings were exposed to the laminar flow and stationary immersion. The laminar flow was pressure driven and confined in a flow channel. A 3.5 wt% sodium chloride solution and pure water was employed as the working fluid with a variety of flow rates. The corrosion protective properties of organic coatings were monitored inline by Electrochemical Impedance Spectroscopy (EIS) measurement. Equivalent circuit models were employed to interpret the EIS spectra. The time evolution of coating resistance and capacitance obtained from the model was studied to demonstrate the coating degradation. Thickness, gloss, and other topography characterizations were conducted to facilitate the assessment of the corrosion. The working fluids were characterized by Fourier Transform Infrared Spectrometer (FTIR) and conductivity measurement. The influence of flow rate, fluid shear, fluid composition, and other effects in the coating degradation were investigated. We conclude that flowing fluid on the coating surface accelerates the transport of water, oxygen, and ions into the coating, as

  1. Design of optical coatings

    Science.gov (United States)

    Gunkel, Claus W.

    1990-08-01

    A highly sophisticated antireflection coating and a cut-on-filter - designed by the Leitz program "RDP" - will be pointed out. The program runs on a VAX 8530 and allows to calculate reflectance, transmittance and phase of randomly polarized light which interacts with marginal surfaces. The number of layers is not limited. Some or even all layers are allowed to be anistropic. Up to four layers may be inhomogeneous both in refractive indices and absorption constants. At a time two thicknesses, two refractive indices and absorption constants as well as the angles of incidence may be varied independently in each run. The calculated values will be compared with the results of measurements. The antireflection coating is evaporated in a Balzers high vacuum evaporation plant, controlled by the process unit BPU 420, whereas the cut-on filter is evaporated in a Leybold box coater with Leycom III and two electron-beam guns.

  2. Superelastic Orthopedic Implant Coatings

    Science.gov (United States)

    Fournier, Eric; Devaney, Robert; Palmer, Matthew; Kramer, Joshua; El Khaja, Ragheb; Fonte, Matthew

    2014-07-01

    The demand for hip and knee replacement surgery is substantial and growing. Unfortunately, most joint replacement surgeries will fail within 10-25 years, thereby requiring an arduous, painful, and expensive revision surgery. To address this issue, a novel orthopedic implant coating material ("eXalt") has been developed. eXalt is comprised of super elastic nitinol wire that is knit into a three-dimensional spacer fabric structure. eXalt expands in vivo to conform to the implantation site and is porous to allow for bone ingrowth. The safety and efficacy of eXalt were evaluated through structural analysis, mechanical testing, and a rabbit implantation model. The results demonstrate that eXalt meets or exceeds the performance of current coating technologies with reduced micromotion, improved osseointegration, and stronger implant fixation in vivo.

  3. Permeability of edible coatings.

    Science.gov (United States)

    Mishra, B; Khatkar, B S; Garg, M K; Wilson, L A

    2010-01-01

    The permeabilities of water vapour, O2 and CO2 were determined for 18 coating formulations. Water vapour transmission rate ranged from 98.8 g/m(2).day (6% beeswax) to 758.0 g/m(2).day (1.5% carboxymethyl cellulose with glycerol). O2 permeability at 14 ± 1°C and 55 ± 5% RH ranged from 1.50 to 7.95 cm(3)cm cm(-2)s(-1)Pa(-1), with CO2 permeability 2 to 6 times as high. Permeability to noncondensable gases (O2 and CO2) was higher for hydrophobic (peanut oil followed by beeswax) coatings as compared to hydrophilic (whey protein concentrate and carboxymethyl cellulose).

  4. Permeability of edible coatings

    OpenAIRE

    B Mishra; Khatkar, B. S.; Garg, M. K.; Wilson, L.A.

    2010-01-01

    The permeabilities of water vapour, O2 and CO2 were determined for 18 coating formulations. Water vapour transmission rate ranged from 98.8 g/m2.day (6% beeswax) to 758.0 g/m2.day (1.5% carboxymethyl cellulose with glycerol). O2 permeability at 14 ± 1°C and 55 ± 5% RH ranged from 1.50 to 7.95 cm3cm cm−2s−1Pa−1, with CO2 permeability 2 to 6 times as high. Permeability to noncondensable gases (O2 and CO2) was higher for hydrophobic (peanut oil followed by beeswax) coatings as compared to hydrop...

  5. Photochromic mesoporous hybrid coatings

    Science.gov (United States)

    Raboin, L.; Matheron, M.; Gacoin, T.; Boilot, J.-P.

    2008-09-01

    Spirooxazine (SO) photochromic molecules were trapped in sol-gel matrices. In order to increase the colourability and improve mechanical properties of sol-gel photochromic films, we present an original strategy in which SO photochromic molecules were dispersed in mesoporous organized films using the impregnation technique. Well-ordered organosilicate mesoporous coatings with the 3D-hexagonal symmetry were prepared by the sol-gel technique. These robust mesoporous films, which contain high amounts of hydrophobic methyl groups at the pore surface, offer optimized environments for photochromic dyes dispersed by impregnation technique. After impregnation by a spirooxazine solution, the photochromic response is only slightly slower when compared with mesostructured or soft sol-gel matrices, showing that mesoporous organized hybrid matrix are good host for photochromic dyes. Moreover, the molecular loading in films is easily adjustable in a large range using multi-impregnation procedure and increasing the film thickness leading to coatings for optical switching devices.

  6. Self-Cleaning Coatings

    Science.gov (United States)

    2014-06-01

    vacuum suction flask was used to volatilize the extra thinner from the mixtures. 2.1.2.2 Procedures Removal of filler from PSX-700 The original PSX...employed in this research to activate and ensure proper dispersions of these functional particles into the coating system. It is anticipated that...clear part (the resin and solvent) of the tubes was poured into a vacuum flask, while the precipitate (filler) from the bottom of the tubes was

  7. Thermal barrier coating materials

    Directory of Open Access Journals (Sweden)

    David R. Clarke

    2005-06-01

    Full Text Available Improved thermal barrier coatings (TBCs will enable future gas turbines to operate at higher gas temperatures. Considerable effort is being invested, therefore, in identifying new materials with even better performance than the current industry standard, yttria-stabilized zirconia (YSZ. We review recent progress and suggest that an integrated strategy of experiment, intuitive arguments based on crystallography, and simulation may lead most rapidly to the development of new TBC materials.

  8. for zeolite coating

    Directory of Open Access Journals (Sweden)

    Carlos Renato Rambo

    2006-01-01

    Full Text Available Biotemplating is the processing of microcellular ceramics by reproduction of natural morphologies, where the microstructural features of the biotemplate are maintained in the biomorphic ceramic. Different biotemplates with distinct pore anatomies were used to produce biomorphic supports for the zeolite coating: wood, cardboard, sea-sponge and sisal. The biomorphic ceramics were produced by distinguished processing routes: Al-gas infiltration-reaction, liquid-metal infiltration, dip-coating and sol-gel synthesis, in order to produce nitrides, carbides and oxides, depending on the processing conditions. The zeolite coating was performed by hydrothermal growth of MFI-type (Silicalite-1 and ZSM-5 zeolite crystals onto the internal pore walls of the biomorphic templates. The final biomorphic ceramic-zeolite composites were physically characterized, evaluated in terms of their gas adsorption capabilities and correlated to their microstructure and specific pore anatomy. The combination of the properties of the biomorphic ceramics with the adsorption properties of zeolites results in materials with distinct properties as potential candidates for adsorption and catalytic applications due to their characteristic porosity, molecular sieving capabilities and high thermo-mechanical strength.

  9. Decoding white coat hypertension.

    Science.gov (United States)

    Bloomfield, Dennis A; Park, Alex

    2017-03-16

    There is arguably no less understood or more intriguing problem in hypertension that the "white coat" condition, the standard concept of which is significantly blood pressure reading obtained by medical personnel of authoritative standing than that obtained by more junior and less authoritative personnel and by the patients themselves. Using hospital-initiated ambulatory blood pressure monitoring, the while effect manifests as initial and ending pressure elevations, and, in treated patients, a low daytime profile. The effect is essentially systolic. Pure diastolic white coat hypertension appears to be exceedingly rare. On the basis of the studies, we believe that the white coat phenomenon is a common, periodic, neuro-endocrine reflex conditioned by anticipation of having the blood pressure taken and the fear of what this measurement may indicate concerning future illness. It does not change with time, or with prolonged association with the physician, particularly with advancing years, it may be superimposed upon essential hypertension, and in patients receiving hypertensive medication, blunting of the nighttime dip, which occurs in about half the patients, may be a compensatory mechanisms, rather than an indication of cardiovascular risk. Rather than the blunted dip, the morning surge or the widened pulse pressure, cardiovascular risk appears to be related to elevation of the average night time pressure.

  10. High-temperature protective coatings on superalloys

    Institute of Scientific and Technical Information of China (English)

    刘培生; 梁开明; 周宏余

    2002-01-01

    Protective coatings are essential for superalloys to serve as blades of gas turb ines at high temperatures, and they primarily include aluminide coating, MCrAlY overlay coating, thermal barrier coating and microcrystalline coating. In this paper, all these high-temperature coatings are reviewed as well as their preparing techniques. Based on the most application and the main failure way, the importance is then presented for further deepgoing study on the high-temperature oxidation law of aluminide coatings.

  11. Coating and curing apparatus and methods

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor L.; Gonsalves, Peter R.; Maghsoodi, Sina; Colson, Thomas E.; Yang, Yu S.; Abrams, Ze' ev R.

    2016-04-19

    Disclosed is a coating apparatus including flow coating and roll-coating that may be used for uniform sol-gel coating of substrates such as glass, solar panels, windows or part of an electronic display. Also disclosed are methods for substrate preparation, flow coating and roll coating. Lastly, systems and methods for curing sol-gel coatings deposited onto the surface of glass substrates using high temperature air-knives, infrared emitters and direct heat applicators are disclosed.

  12. A New Coating Process for Production of Coated Magnesium Powders

    Science.gov (United States)

    2008-04-16

    TGA data for magnesium hydroxide content. TGA analysis of the as-coated powders is a reproducible and accurate method for the determination of... TGA analysis of the as-coated powder, there is approximately 3wt% magnesium hydroxide present in the material due to the process variation compared...11: Magnesium hydroxide content as measured by TGA analysis for the 1-lb batches of as-coated ground powder Figure 12: Nitrometer analysis of

  13. Implementation of the vortex force formalism in the coupled ocean-atmosphere-wave-sediment transport (COAWST) modeling system for inner shelf and surf zone applications

    Science.gov (United States)

    Kumar, Nirnimesh; Voulgaris, George; Warner, John C.; Olabarrieta, Maitane

    2012-01-01

    The coupled ocean-atmosphere-wave-sediment transport modeling system (COAWST) enables simulations that integrate oceanic, atmospheric, wave and morphological processes in the coastal ocean. Within the modeling system, the three-dimensional ocean circulation module (ROMS) is coupled with the wave generation and propagation model (SWAN) to allow full integration of the effect of waves on circulation and vice versa. The existing wave-current coupling component utilizes a depth dependent radiation stress approach. In here we present a new approach that uses the vortex force formalism. The formulation adopted and the various parameterizations used in the model as well as their numerical implementation are presented in detail. The performance of the new system is examined through the presentation of four test cases. These include obliquely incident waves on a synthetic planar beach and a natural barred beach (DUCK' 94); normal incident waves on a nearshore barred morphology with rip channels; and wave-induced mean flows outside the surf zone at the Martha's Vineyard Coastal Observatory (MVCO).

  14. Spitzer UltRa Faint SUrvey Program (SURFS UP). II. IRAC-Detected Lyman-Break Galaxies at 6 < z < 10 Behind Strong-Lensing Clusters

    CERN Document Server

    Huang, Kuang-Han; Lemaux, Brian C; Ryan,, R E; Hoag, Austin; Castellano, Marco; AmorÍn, Ricardo; Fontana, Adriano; Brammer, Gabriel B; Cain, Benjamin; Lubin, L M; Merlin, Emiliano; Schmidt, Kasper B; Schrabback, Tim; Treu, Tommaso; Gonzalez, Anthony H; Von Der Linden, Anja; Knight, Robert I

    2015-01-01

    We study the stellar population properties of the IRAC-detected $6 \\lesssim z \\lesssim 10$ galaxy candidates from the Spitzer UltRa Faint SUrvey Program (SURFS UP). Using the Lyman Break selection technique, we find a total of 16 new galaxy candidates at $6 \\lesssim z \\lesssim 10$ with $S/N \\geq 3$ in at least one of the IRAC $3.6\\mu$m and $4.5\\mu$m bands. According to the best mass models available for the surveyed galaxy clusters, these IRAC-detected galaxy candidates are magnified by factors of $\\sim 1.2$--$5.5$. We find that the IRAC-detected $6 \\lesssim z \\lesssim 10$ sample is likely not a homogeneous galaxy population: some are relatively massive (stellar mass as high as $4 \\times 10^9\\,M_{\\odot}$) and evolved (age $\\lesssim 500$ Myr) galaxies, while others are less massive ($M_{\\text{stellar}}\\sim 10^8\\,M_{\\odot}$) and very young ($\\sim 10$ Myr) galaxies with strong nebular emission lines that boost their rest-frame optical fluxes. We identify two Ly$\\alpha$ emitters in our sample from the Keck DEIMOS...

  15. Dense protective coatings, methods for their preparation and coated articles

    Energy Technology Data Exchange (ETDEWEB)

    Tulyani, Sonia; Bhatia, Tania; Smeggil, John G.

    2015-12-29

    A method for depositing a protective coating on a complex shaped substrate includes the steps of: (1) dipping a complex shaped substrate into a slurry to form a base coat thereon, the slurry comprising an aqueous solution, at least one refractory metal oxide, and at least one transient fluid additive present in an amount of about 0.1 percent to 10 percent by weight of the slurry; (2) curing the dipped substrate; (3) dipping the substrate into a precursor solution to form a top barrier coat thereon; and (4) heat treating the dipped, cured substrate to form a protective coating.

  16. Nanoparticle/Polymer Nanocomposite Bond Coat or Coating

    Science.gov (United States)

    Miller, Sandi G.

    2011-01-01

    This innovation addresses the problem of coatings (meant to reduce gas permeation) applied to polymer matrix composites spalling off in service due to incompatibility with the polymer matrix. A bond coat/coating has been created that uses chemically functionalized nanoparticles (either clay or graphene) to create a barrier film that bonds well to the matrix resin, and provides an outstanding barrier to gas permeation. There is interest in applying clay nanoparticles as a coating/bond coat to a polymer matrix composite. Often, nanoclays are chemically functionalized with an organic compound intended to facilitate dispersion of the clay in a matrix. That organic modifier generally degrades at the processing temperature of many high-temperature polymers, rendering the clay useless as a nano-additive to high-temperature polymers. However, this innovation includes the use of organic compounds compatible with hightemperature polymer matrix, and is suitable for nanoclay functionalization, the preparation of that clay into a coating/bondcoat for high-temperature polymers, the use of the clay as a coating for composites that do not have a hightemperature requirement, and a comparable approach to the preparation of graphene coatings/bond coats for polymer matrix composites.

  17. Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dong-Ming

    2005-01-01

    Thermal barrier coatings will be more aggressively designed to protect gas turbine engine hot-section components in order to meet future engine higher fuel efficiency and lower emission goals. In this presentation, thermal barrier coating development considerations and requirements will be discussed. An experimental approach is established to monitor in real time the thermal conductivity of the coating systems subjected to high-heat-flux, steady-state and cyclic temperature gradients. Advanced low conductivity thermal barrier coatings have also been developed using a multi-component defect clustering approach, and shown to have improved thermal stability. The durability and erosion resistance of low conductivity thermal barrier coatings have been improved utilizing advanced coating architecture design, composition optimization, in conjunction with more sophisticated modeling and design tools.

  18. Pipeline integrity : control by coatings

    Energy Technology Data Exchange (ETDEWEB)

    Khanna, A.S. [Indian Inst. of Technology, Bombay (India)

    2008-07-01

    This presentation provided background information on the history of cross-country pipelines in India. It discussed the major use of gas. The key users were described as being the power and fertilizer industries, followed by vehicles using compressed natural gas to replace liquid fuels and thereby reduce pollution. The presentation also addressed the integrity of pipelines in terms of high production, safety, and monitoring. Integrity issues of pipelines were discussed with reference to basic design, control of corrosion, and periodic health monitoring. Other topics that were outlined included integrity by corrosion control; integrity by health monitoring; coatings requirements; classification of UCC pipeline coatings; and how the pipeline integrity approach can help to achieve coatings which give design life without any failure. Surface cleanliness, coating conditions, and the relationship between temperature of Epoxy coating and the time of adhesive coating were also discussed. Last, the presentation provided the results of an audit of the HBJ pipeline conducted from 1999 to 2000. tabs., figs.

  19. Functional Coatings with Polymer Brushes

    OpenAIRE

    König, Meike

    2013-01-01

    The scope of this work is to fathom different possibilities to create functional coatings with polymer brushes. The immobilization of nanoparticles and enzymes is investigated, as well as the affection of their properties by the stimuli-responsiveness of the brushes. Another aspect is the coating of 3D-nanostructures by polymer brushes and the investigation of the resulting functional properties of the hybrid material. The polymer brush coatings are characterized by a variety of microscopic a...

  20. Ethiop. J. Sci. & Technol. 9(1) 15-30, 2016 15 Prevalence of ...

    African Journals Online (AJOL)

    determined the prevalence of diarrhea causing intestinal protozoans and the associated risk factors in diarrheic ... potential risk factors for diarrhea should be given to caretakers/parents for ..... Child's age was found to be a significant predictor.

  1. Big Data v technológiách IBM

    OpenAIRE

    Šoltýs, Matej

    2014-01-01

    This diploma thesis presents Big Data technologies and their possible use cases and applications. Theoretical part is initially focused on definition of term Big Data and afterwards is focused on Big Data technology, particularly on Hadoop framework. There are described principles of Hadoop, such as distributed storage and data processing, and its individual components. Furthermore are presented the largest vendors of Big Data technologies. At the end of this part of the thesis are described ...

  2. Article Including Environmental Barrier Coating System

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  3. Electrochemically switchable polypyrrole coated membranes

    Energy Technology Data Exchange (ETDEWEB)

    Weidlich, Claudia, E-mail: weidlich@dechema.d [DECHEMA e.V., Karl-Winnacker-Institut, Theodor-Heuss-Allee 25, D-60486 Frankfurt am Main (Germany); Mangold, Klaus-Michael [DECHEMA e.V., Karl-Winnacker-Institut, Theodor-Heuss-Allee 25, D-60486 Frankfurt am Main (Germany)

    2011-04-01

    A method for coating membranes with polypyrrole (PPy) has been developed. Different membranes, such as microfiltration as well as ion exchanger membranes have been coated with PPy to yield electrical conductivity of the membranes. The coated membranes have been investigated by cyclic voltammetry and scanning electron microscopy and their permeability and permselectivity have been tested. The results show that PPy can be tailored as cation or anion exchanger and its porosity can be controlled to avoid any impairment of the membrane by the polymer layer. These PPy coated membranes can be applied as electrochemically switchable, functionalised membranes with controllabel and variable separation properties.

  4. Studies on Nanocomposite Conducting Coatings

    Directory of Open Access Journals (Sweden)

    Amitava Bhattacharyya

    2013-01-01

    Full Text Available Nanocomposite conducting coatings can impart stable surface electrical conductivity on the substrate. In this paper, carbon nanofiber (CNF and nanographite (NG are dispersed in thermoplastic polyurethane matrix and coated on the surface of glass and polyethylene terephthalate (PET film. The nanoparticles dispersion was studied under TEM. The coating thicknesses were estimated. Further, their resistance and impedance were measured. It has been observed that the 5 wt% CNF dispersed nanocomposite coatings show good conductivity. The use of NG can bring down the amount of CNF; however, NG alone has failed to show significant improvement in conductivity. The nanocomposite coating on PET film using 2.5 wt% of both CNF and NG gives frequency-independent impedance which indicates conducting network formation by the nanoparticles. The study was carried out at different test distances on nanocomposite coated PET films to observe the linearity and continuity of the conducting network, and the result shows reasonable linearity in impedance over total test length (from 0.5 cm to 4.5 cm. The impedance of nanocomposite coatings on glass is not frequency independent and also not following linear increase path with distance. This indicates that the dispersion uniformity is not maintained in the coating solution when it was coated on glass.

  5. Coatings Technology Integration Office (CTIO)

    Data.gov (United States)

    Federal Laboratory Consortium — CTIO serves as the Air Force's central resource for aircraft coating systems and their applications. CTIO's primary objectives are pollution prevention and improved...

  6. Corrosion behavior of duplex coatings

    Directory of Open Access Journals (Sweden)

    K. Raghu Ram Mohan Reddy

    2016-07-01

    Full Text Available The titanium alloys are used in defense, aerospace, automobile, chemical plants and biomedical applications due to their very high strength and lightweight properties. However, corrosion is a life-limiting factor when Ti alloys are exposed to different chemical environments at high temperatures. In the present paper, duplex NiCrAlY/WC–Co coating is coated onto Ti6Al4V substrate to investigate the corrosion behavior of both coated samples and the substrate. The duplex coating was performed with NiCrAlY as the intermediate coat of 200 μm thickness deposited by HVOF process and WC–Co ceramic top coat with varying thicknesses of 250 μm, 350 μm and 450 μm deposited by DS process. Potentiodynamic polarization tests were employed to investigate the corrosion performance of duplex coated samples and substrate in Ringer’s solution at 37 °C and pH value was set to 5.7. Finally the results reveal that 350 μm thick coated samples showed highest corrosion resistance compared to 250 μm thick samples as well as bare substrate. However, the 450 μm thick coated sample showed poor corrosion resistance compared to the substrate. The scale formed on the samples upon corrosion was characterized by using SEM analysis to understand the degree of corrosion behavior.

  7. Protective coatings on extensible biofibres

    Science.gov (United States)

    Holten-Andersen, Niels; Fantner, Georg E.; Hohlbauch, Sophia; Waite, J. Herbert; Zok, Frank W.

    2007-09-01

    Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges. If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate. High hardness, however, comes at the expense of extensibility. This property trade-off makes the design of coatings for even moderately compliant substrates problematic, because substrate deformation easily exceeds the strain limit of the coating. Although the highest strain capacity of synthetic fibre coatings is less than 10%, deformable coatings are ubiquitous in biological systems. With an eye to heeding the lessons of nature, the cuticular coatings of byssal threads from two species of marine mussels, Mytilus galloprovincialis and Perna canaliculus, have been investigated. Consistent with their function to protect collagenous fibres in the byssal-thread core, these coatings show hardness and stiffness comparable to those of engineering plastics and yet are surprisingly extensible; the tensile failure strain of P. canaliculus cuticle is about 30% and that of M. galloprovincialis is a remarkable 70%. The difference in extensibility is attributable to the presence of deformable microphase-separated granules within the cuticle of M. galloprovincialis. The results have important implications in the design of bio-inspired extensible coatings.

  8. Microplasma sprayed hydroxyapatite coatings

    CERN Document Server

    Dey, Arjun

    2015-01-01

    ""This unique book on development of microplasma sprayed HAp coating has been organized in a very compact yet comprehensive manner. This book also highlights the horizons of future research that invites the attention of global community, particularly those in bio-medical materials and bio-medical engineering field. This book will surely act as a very useful reference material for both graduate/post-graduate students and researchers in the field of biomedical, orthopedic and manufacturing engineering and research. I truly believ that this is the first ever effort which covers almost all the

  9. Mold and Crucible Coatings

    Science.gov (United States)

    1986-04-28

    34;" -"""-"’" " " ""’’ "" "" ’"" ’ j * AD I. AT)-E 9 7 W CONTRACTOR REPORT ARCCD-CR-86007 MOLD AND CRUCIBLE COATINGS Sylvia J. Canino Arthur L. Geary Nuclear...IFnlRpr April 1984_-_December 198, .. AUTNORfo) S. CONTRACT on CRAM? # "I MWef(e)I Sylvia J. Canino and Arthur L. Geary DAAK1O-84-C-0056 PERFORMING

  10. Carbonaceous film coating

    Science.gov (United States)

    Maya, Leon

    1989-01-01

    A method of making a carbonaceous film comprising heating tris(1,3,2-benzodiazaborolo)borazine or dodecahydro tris[1,3,2]diazaborine[1,2-a:1'2'-c:1"2"-e]borazine in an inert atmosphere in the presence of a substrate to a temperature at which the borazine compound decomposes, and the decomposition products deposit onto the substrate to form a thin, tenacious, highly reflective conductive coating having a narrow band gap which is susceptible of modification and a relatively low coefficient of friction.

  11. Thermal Protective Coatings

    Science.gov (United States)

    1976-03-31

    within 2 minutes for the No. 4. Sodiurn silicate was tested with alumnnunm hydroxide, nerlite, vermiculite and borax filler systems. None of the systems...1.27 cm) thick, 3/16 inch (0.48 cm) cell size, 5.5 lbs/ft 3 (88.1 kg/m 3 ) glass/phenolic honey - p comib set into the fire retardant maLerial. The sheets...COATING SPECIMEN PERCENT BY WEIGHT THICKNESS WEIGHT ANO. MATRIX FILLrR 1’fLS (CM) LBS/FT. (kg,’-), 26 50% Shell 828 Epoxy Resin Borax - 54 (.14) .39

  12. ATHENA optimized coating design

    DEFF Research Database (Denmark)

    Ferreira, Desiree Della Monica; Christensen, Finn Erland; Jakobsen, Anders Clemen

    2012-01-01

    baseline including on- and off-axis effective area curves are presented. We find that the use of linear graded multilayers can increas by 37% the integraed effective area of ATHENA in the energy range between 0.1 keV and 15keV.© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE......The optimization of coating design for the ATHENA mission si described and the possibility of increasing the telescope effective area in the range between 0.1 and 10 keV is investigated. An independent computation of the on-axis effective area based on the mirror design of ATHENA is performed...

  13. USAF Inorganic Coating Successes

    Science.gov (United States)

    2012-08-01

    in2 (Marginal Fail) 7 or more pits were seen in a total of 30 in2 (Fail) Aluminum CFCC Screening Test Results Conversion Coating Alloy OC-ALC... 6061 168+ Hours 7075 168+ Hours 2024 48 Hours 5052 48-72 Hours 72-168+ Hours (5 pits on one panel at 48 hours, but then no more ) 6061 72...Dichromate Sealer Test Results Sealer Substrate Quality Thickness Corrosion Primer Dry Tape Adhesion Wet Tape Adhesion Baseline 1 Al 2024-T3 PASS

  14. Low Temperature Powder Coating

    Science.gov (United States)

    2011-02-09

    of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) • Legacy primers contain hexavalent chrome • Conventional powder coatings...panels • Third panel exhibited a single filament extending slightly beyond allowable tolerance Filiform Corrosion Resistance LTCPC on 2024 T-3 Clad ...LTCPC on 2024 T-3 Clad O G D E N A I R L O G I S T I C S C E N T E R BE AMERICA’S BEST JTP Results • LTCPC performance similar or better than wet

  15. Dry coating, a novel coating technology for solid pharmaceutical dosage forms.

    Science.gov (United States)

    Luo, Yanfeng; Zhu, Jesse; Ma, Yingliang; Zhang, Hui

    2008-06-24

    Dry coating is a coating technology for solid pharmaceutical dosage forms derived from powder coating of metals. In this technology, powdered coating materials are directly coated onto solid dosage forms without using any solvent, and then heated and cured to form a coat. As a result, this technology can overcome such disadvantages caused by solvents in conventional liquid coating as serious air pollution, high time- and energy-consumption and expensive operation cost encountered by liquid coating. Several dry coating technologies, including plasticizer-dry-coating, electrostatic-dry-coating, heat-dry-coating and plasticizer-electrostatic-heat-dry-coating have been developed and extensively reported. This mini-review summarized the fundamental principles and coating processes of various dry coating technologies, and thoroughly analyzed their advantages and disadvantages as well as commercialization potentials.

  16. Alternative HTS coated conductors

    Science.gov (United States)

    Blaugher, R. D.; Bhattacharya, R. N.; Chen, J.; Padmanabhan, R.

    2002-10-01

    The availability of Bi-2223 high-temperature-superconductor (HTS) powder-in-tube (PIT) tape, with acceptable performance for long lengths, has provided the ability to construct a wide range of HTS electric power components. As a result, there are major worldwide projects in developing HTS electric power components for demonstration in a utility environment. Utility acceptance for superconducting power equipment will depend on several key factors: improved system performance, lower life-cycle costs, higher efficiency versus conventional technology, reliability and maintenance comparable to conventional power equipment, and a competitive installed cost. The latter is impacted by the current high cost of HTS conductors, which must be lowered to costs comparable to conventional Nb-Ti wire, i.e., $2-5/kAm. The present performance and cost of state-of-the-art Bi-2223 HTS tape, although acceptable for prototype construction, is viewed as a major deterrent that may compromise eventual commercialization for most of these electric power devices. The so-called second-generation coated conductor development, with emphasis on conductors employing HTS YBCO films, is viewed as the solution to this performance and cost issue. The potential for the Tl, Hg, and Bi-oxide superconductors for producing an HTS tape as alternatives to Bi-2223 PIT (and YBCO) will be discussed with some recent results on Bi-2212 “coated conductor” development.

  17. Lignin based controlled release coatings

    NARCIS (Netherlands)

    Mulder, W.J.; Gosselink, R.J.A.; Vingerhoeds, M.H.; Harmsen, P.F.H.; Eastham, D.

    2011-01-01

    Urea is a commonly used fertilizer. Due to its high water-solubility, misuse easily leads to excess nitrogen levels in the soil. The aim of this research was to develop an economically feasible and biodegradable slow-release coating for urea. For this purpose, lignin was selected as coating material

  18. Westinghouse thermal barrier coatings development

    Energy Technology Data Exchange (ETDEWEB)

    Goedjen, J.G.; Wagner, G. [Westinghouse Electric Corp., Orlando, FL (United States)

    1995-10-01

    Westinghouse, in conjunction with the Department of Energy and Oak Ridge National Laboratory, has embarked upon a program for the development of advanced thermal barrier coatings for industrial gas turbines. Development of thermal barrier coatings (TBC`s) for industrial gas turbines has relied heavily on the transfer of technology from the aerospace industry. Significant differences in the time/temperature/stress duty cycles exist between these two coating applications. Coating systems which perform well in aerospace applications may not been optimized to meet power generation performance requirements. This program will focus on development of TBC`s to meet the specific needs of power generation applications. The program is directed at developing a state-of-the-art coating system with a minimum coating life of 25,000 hours at service temperatures required to meet increasing operating efficiency goals. Westinghouse has assembled a team of university and industry leaders to accomplish this goal. Westinghouse will coordinate the efforts of all program participants. Chromalloy Turbine Technologies, Inc. and Sermatech International, Inc. will be responsible for bond coat and TBC deposition technology. Praxair Specialty Powders, Inc. will be responsible for the fabrication of all bond coat and ceramic powders for the program. Southwest Research Institute will head the life prediction modelling effort; they will also be involved in coordinating nondestructive evaluation (NDE) efforts. Process modelling will be provided by the University of Arizona.

  19. Bright Prospects for Fluorine Coatings

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Fluorine coatings are a category of new coatings with fluorine-containing resins as the major film forming substances.They have excellent weather resistance,solvent resistance, acid/alkali resistance, no toxicity and no hazards,and they contribute to film stability.

  20. Intumescent coatings under fast heating

    DEFF Research Database (Denmark)

    Nørgaard, Kristian Petersen; Dam-Johansen, Kim; Català, Pere

    2012-01-01

    Intumescent coatings are widely used to delay or minimise the destructive effects of fire. They are usually tested under conditions that simulate the relatively slow build-up of heat in a normal fire. Here, the effects of damage during a fire causing sudden heating of the coating were studied....

  1. Pack cementation coatings for alloys

    Energy Technology Data Exchange (ETDEWEB)

    He, Yi-Rong; Zheng, Minhui; Rapp, R.A. [Ohio State Univ., Columbus, OH (United States)

    1996-08-01

    The halide-activated pack cementation process was modified to produce a Ge-doped silicide diffusion coating on a Cr-Cr{sub 2}Nb alloy in a single processing step. The morphology and composition of the coating depended both on the composition of the pack and on the composition and microstructure of the substrate. Higher Ge content in the pack suppressed the formation of CrSi{sub 2} and reduced the growth kinetics of the coating. Ge was not homogeneously distributed in the coatings. In cyclic and isothermal oxidation in air at 700 and 1050{degrees}C, the Ge-doped silicide coating protected the Cr-Nb alloys from significant oxidation by the formation of a Ge-doped silica film. The codeposition and diffusion of aluminum and chromium into low alloy steel have been achieved using elemental Al and Cr powders and a two-step pack cementation process. Sequential process treatments at 925{degrees}C and 1150{degrees}C yield dense and uniform ferrite coatings, whose compositions are close to either Fe{sub 3}Al or else FeAl plus a lower Cr content, when processed under different conditions. The higher content of Al in the coatings was predicted by thermodynamic calculations of equilibrium in the gas phase. The effect of the particle size of the metal powders on the surface composition of the coating has been studied for various combinations of Al and Cr powders.

  2. External coating of colonic anastomoses

    DEFF Research Database (Denmark)

    Pommergaard, Hans-Christian; Achiam, Michael Patrick; Rosenberg, Jacob

    2012-01-01

    Colon anastomotic leakage remains both a frequent and serious complication in gastrointestinal surgery. External coating of colonic anastomoses has been proposed as a means to lower the rate of this complication. The aim of this review was to evaluate existing studies on external coating of colonic...

  3. Foundry Coating Technology: A Review

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat

    2011-01-01

    is important. In this review, a detailed description of these topics and examples are provided where necessary. A potential area of research in foundry coating development, using sol-gel process is suggested. The application of sol-gel technology in the development of foundry coatings is a novel approach....

  4. POWDER COATINGS: A TECHNOLOGY REVIEW

    Science.gov (United States)

    In 1995, surface coatings accounted for nearly 2.55 million Mg of volatile organic compound (VOC) emissions nationally, which is more than 12% of VOC emissions from all sources. In recent years, powder coatings have been steadily gaining popularity as an alternative to solvent-bo...

  5. Lignin based controlled release coatings

    NARCIS (Netherlands)

    Mulder, W.J.; Gosselink, R.J.A.; Vingerhoeds, M.H.; Harmsen, P.F.H.; Eastham, D.

    2011-01-01

    Urea is a commonly used fertilizer. Due to its high water-solubility, misuse easily leads to excess nitrogen levels in the soil. The aim of this research was to develop an economically feasible and biodegradable slow-release coating for urea. For this purpose, lignin was selected as coating

  6. Lignin based controlled release coatings

    NARCIS (Netherlands)

    Mulder, W.J.; Gosselink, R.J.A.; Vingerhoeds, M.H.; Harmsen, P.F.H.; Eastham, D.

    2011-01-01

    Urea is a commonly used fertilizer. Due to its high water-solubility, misuse easily leads to excess nitrogen levels in the soil. The aim of this research was to develop an economically feasible and biodegradable slow-release coating for urea. For this purpose, lignin was selected as coating material

  7. Moisture transport in coated wood

    NARCIS (Netherlands)

    Meel, P.A. van; Erich, S.J.F.; Huinink, H.P.; Kopinga, K.; Jong, J. DE; Adan, O.C.G.

    2011-01-01

    Moisture accumulation inside wood causes favorable conditions for decay. Application of a coating alters the moisture sorption of wood and prevents accumulation of moisture. This paper presents the results of a nuclear magnetic resonance (NMR) study on the influence of a coating on the moisture abso

  8. Modeling of Carrier-based Aircraft's Catapult Launch under Surf%有浪条件下舰载机弹射起飞建模研究

    Institute of Scientific and Technical Information of China (English)

    张磊; 王海峰; 宋笔锋

    2012-01-01

    有浪条件下,航空母舰的摇摆会影响舰载机的安全起飞.对有浪条件下舰载机弹射起飞过程受力、运动情况进行了分析.采用柔性起落架来实现航空母舰与舰载机之间的干涉,建立了模块化的仿真系统并研究了中等海况下航空母舰的摇摆对舰载机弹射起飞的影响.仿真结果表明,中等海况下纵摇是导致下沉的主要因素,最大下沉量可达15 m;横摇导致最大下沉约0.2m;垂荡导致最大下沉约1m;横摇会导致明显的横侧向运动;纵摇、横摇、垂荡均会导致起落架最大载荷显著增大.%The carrier' s swing can endanger the safety of carrier-based aircraft launching. The forces and motions during the carrier-based aircraft catapult launch under surf, adopted flexible gear model to achieve interaction between the carrier-based aircraft and the carrier are theoretically analyzed, founded a modularized simulation system and researched on the influence of carrier' s rocking on aircraft' s catapult launch. Simulation results show that under moderate sea conditions, the pitch is the main factor leading to the subsidence which can up to 15 meters while roll resulting about 0.2 m and heave resulting about 1 m in the maximum subsidence. Roll also leads to significant lateral movement. Pitch, roll and heave result are significantly increased in load of gear.

  9. The Multi-Scale Response of Water Quality, Biodiversity and Carbon Sequestration to Coupled Macronutrient Cycling from Source to Sea: TURF2SURF

    Science.gov (United States)

    Wade, Andrew; Emmett, Bridget; Jago, Colin; Stutter, Marc; Biggs, Jeremy

    2016-04-01

    Turf2Surf is a large, multi-disciplinary project that aims to test the hypothesis that the spatial and temporal patterns of water quality, C sequestration and biodiversity are better explained through the large-scale coupling of C, N and P cycles than by single cycle, single system approaches. To achieve this, a catchment-scale study of the River Conwy (349 km2) in Wales is being done with emphasis on determining when, where and how coupled macronutrient (C, N, P) cycling occurs in the biogeochemical hot-spots of the soils, the riparian zone, instream and in the river-estuarine transition zone. A major integrated measurement programme is now largely complete. New data are being analysed to understand which soil properties have greatest influence on above and below-ground productivity including plant traits and how microbial processing is controlled by stoichiometry and nutrient priming. Within the stream network, new understanding is being produced on the in-river algal and whole ecosystem (metabolic) response to CNP additions and the factors affecting the fate and cycling of organic matter. In the estuary, initial results indicate a subsurface jet is causing stratification and a velocity anomaly has been observed. Both are important in terms of suspended matter transport and floc break-up. An integrated model is being built to describe the soil-atmosphere-vegetation processes which is linked, firstly, to flow and water quality models that describe the CNP flux transport and transformations from the headwaters to the estuary and, secondly, to biodiversity models. The purpose of the integrated model is to quantify how coupled CNP cycles may respond to environmental change and thereby affect C sequestration, water quality and biodiversity in the future. The team are now in the major phase of data synthesis and model development and are interested in linking with similar studies involving coupled CNP cycles across the atmospheric

  10. Cigarette recognition system of feature fusion based on HALCON and SURF%基于HALCON与SURF的多特征融合条烟识别系统

    Institute of Scientific and Technical Information of China (English)

    刘镇; 张敏

    2015-01-01

    烟草物流中心工作量大,枯燥单一,导致分拣过程中经常出现多拿、少拿以及错拿等错误分拣现象,这极大的影响了分拣的效率,甚至导致一些不必要的损失。针对此现象,设计了一种基于HALCON与SURF的多特征融合条烟识别系统。不但提出了新的条烟图像特征描述方法,同时针对分拣生产线的特点,对识别策略进行了相应的改进设计。实验表明,此方案具有较好的应用前景。%Heavy and boring work in tobacco logistics center always makes workers make mistakes such as taking more or less, wrong sorting during their work, which not only adversely affect the efficiency of sorting work, and even cause losses which is evitable sometimes. Aiming at this phenomenon, a new system named cigarette recognition of feature fusion based on HALCON and SURF has been designed. In this article, some new methods to describe image features are put forward, meanwhile, recognition strategy has also been improved according to the characteristics of the sorting production line. Experimental results show that this scheme has a good application prospect.

  11. Molecular characterization of two kazal-type serine proteinase inhibitor genes in the surf clam Mesodesma donacium exposed to Vibrio anguillarum.

    Science.gov (United States)

    Maldonado-Aguayo, Waleska; Núñez-Acuña, Gustavo; Valenzuela-Muñoz, Valentina; Chávez-Mardones, Jacqueline; Gallardo-Escárate, Cristian

    2013-06-01

    This study reports two kazal-type serine protease inhibitors (KPI) identified in a cDNA library from the surf clam Mesodesma donacium, and characterized through Rapid Amplification of cDNA Ends (RACE). The KPIs, denoted as MdSPI-1 and MdSPI-2, presented full sequences of 1139 bp and 781 bp respectively. MdSPI-1 had a 5'untranslated region (UTR) of 175 bp, a 3'UTR of 283 bp and an open reading frame (ORF) of 681 pb that encodes for 227 amino acids. MdSPI-2 showed a 5'UTR of 70 bp, a 3'UTR of 279 bp and an ORF of 432 bp that encodes for 144 amino acids. Both sequences presented two kazal-type tandem domains. Phylogenetic analysis of MdSPI-1 and MdSPI-2 shows a main clade composed by other bivalve species and closely related crustaceans. Real time PCR analysis showed that MdSPI-1 is mainly up-regulated in mantle, foot, gills and muscle tissues, while MdSPI-2 is expressed principally in foot tissue. Moreover, to evaluate the immune response of MdSPI-1 and MdSPI-2, infections with Vibrio anguillarum were performed. Herein, MdSPI-1 and MdSPI-2 transcription expression were significantly up-regulated at 2 and 8 h post-challenge. Our results suggest that MdSPI-1 and MdSPI-2 are important humoral factors of innate immunity in M. donacium.

  12. Self-Healing anticorrosive coatings

    DEFF Research Database (Denmark)

    Nesterova, Tatyana

    to steel substrates, and subjected to salt spray exposure and reverse impact testing. Neither of the tests revealed any drawbacks from addition of microcapsules to an epoxy coating in a concentration up to 50 vol %. On the contrary, the results of the impact test has shown that addition of microcapsules......Self-healing anticorrosive coatings are multi-component so-called smart materials, which have been proposed as a way to long-lasting corrosion protection of steel structures. The presently most promising technology route is based on microcapsules, filled with active healing agents, and has been...... means of separation were investigated. Capsules with a mean diameter less than 150 µm were obtained using a steel sieve coated with a fluoropolymer coating. These smaller capsules were used in further investigation as model capsules. A range of microcapsule-containing coatings was formulated, applied...

  13. Dynamic residual stress in thermal sprayed coatings

    Institute of Scientific and Technical Information of China (English)

    Wang Zhiping; Yang Yuanyuan

    2005-01-01

    With the modified Almen method, the forming and development process of residual stress in a thermal sprayed coating has been obtained. The test results identify that the residual stress in a coating is depend on coating material properties, technique and coating thickness. The paper pays much attention to the hysteresis between the coating temperature and residual stress in the coating or between the applied stress and the strain of the coating, and confirms that the fact is resulted from the"Gas Fix" character of a thermal sprayed coating.

  14. Understanding particulate coating microstructure development

    Science.gov (United States)

    Roberts, Christine Cardinal

    How a dispersion of particulates suspended in a solvent dries into a solid coating often is more important to the final coating quality than even its composition. Essential properties like porosity, strength, gloss, particulate order, and concentration gradients are all determined by the way the particles come together as the coating dries. Cryogenic scanning electron microscopy (cryoSEM) is one of the most effective methods to directly visualize a drying coating during film formation. Using this method, the coating is frozen, arresting particulate motion and solidifying the sample so that it be imaged in an SEM. In this thesis, the microstructure development of particulate coatings was explored with several case studies. First, the effect of drying conditions was determined on the collapse of hollow latex particles, which are inexpensive whiteners for paint. Using cryoSEM, it was found that collapse occurs during the last stages of drying and is most likely to occur at high drying temperatures, humidity, and with low binder concentration. From these results, a theoretical model was proposed for the collapse of a hollow latex particle. CryoSEM was also used to verify a theoretical model for the particulate concentration gradients that may develop in a coating during drying for various evaporation, sedimentation and particulate diffusion rates. This work created a simple drying map that will allow others to predict the character of a drying coating based on easily calculable parameters. Finally, the effect of temperature on the coalescence and cracking of latex coatings was explored. A new drying regime for latex coatings was identified, where partial coalescence of particles does not prevent cracking. Silica was shown to be an environmentally friendly additive for preventing crack formation in this regime.

  15. Stability of UV Optical Coatings in Hostile Excimer Laser Environments

    Science.gov (United States)

    1986-06-15

    2614. 22. L. I. Clvankiv, Soy . Phys. Solid State 17 (1974) 730. 23. V. T. Coon, Surf. Sci. 8 (197i) L42. - 24. J. Harris, B. Kasemo, and B...A. Namiot, and R. V. Khokhlov, -. Soy . Phys. JETP 43 (1976) 1226. 43. M. E. Umstead and M. C. Lin: J. Phys. Chem. 8_ (1978) 20477. 44. S. Tachi, K...6531. 82. M. L. Knotek and P. J. Feibelman, Phys. Rev. Lett. 40 (1978) 964. 83. R. P. Holmstrom, J. Lagowski, and H. C. Gatos , Surf. Sci. 7 (1978) L781

  16. Coating of silicon pore optics

    DEFF Research Database (Denmark)

    Cooper-Jensen, Carsten P.; Ackermann, M.; Christensen, Finn Erland

    2009-01-01

    For the International X-ray observatory (IXO), a mirror module with an effective area of 3 m2 at 1.25 keV and at least 0.65 m2 at 6 keV has to be realized. To achieve this goal, coated silicon pore optics has been developed over the last years. One of the challenges is to coat the Si plates...... and still to realize Si-Si bonding. It has been demonstrated that ribbed silicon plates can be produced and assembled into stacks. All previously work has been done using uncoated Si plates. In this paper we describe how to coat the ribbed Si plates with an Ir coating and a top C coating through a mask so...... that there will be coating only between the ribs and not in the area where bonding takes place. The paper includes description of the mounting jig and how to align the mask on top of the plate. We will also present energy scans from Si plates coated through a mask....

  17. Tribological Performance of Coated Surfaces

    Institute of Scientific and Technical Information of China (English)

    Kenneth Holmberg; Anssi Laukkanen

    2004-01-01

    The fundamentals of coating tribology is presented in a generalised holistic approach to friction and wear mechanisms of coated surfaces in dry sliding contacts. It is based on a classification of the tribological contact process into macromechanical, micromechanical, tribochemical contact mechanisms and material transfer. The tribological contact process is dominated by the macromechanical mechanisms, which have been systematically analysed by using four main parameters: the coating-to-substrate hardness relationship, the film thickness, the surface roughness and the debris in the contact. In this paper special attention is given to the microlevel mechanisms, and in particular new techniques for modelling the elastic, plastic and brittle behaviour of the surface by finite element (FEM) computer simulations. The contact condition with a sphere sliding over a plate coated with a very thin hard coating is analysed. A three dimensional FEM model has been developed for calculating the first principal stress distribution in the scratch tester contact of a diamond spherical tip moving with increased load on a 2 μm thick titanium nitride (TiN) coated steel surface. The model is comprehensive in that sense that it considers elastic, plastic and fracture behaviour of the contact surfaces. By identifying from a scratch experiment the location of the first crack and using this as input data can the fracture toughness of the coating be determined.

  18. Laser-based coatings removal

    Energy Technology Data Exchange (ETDEWEB)

    Freiwald, J.G.; Freiwald, D.A. [F2 Associates, Inc., Albuquerque, NM (United States)

    1995-10-01

    Over the years as building and equipment surfaces became contaminated with low levels of uranium or plutonium dust, coats of paint were applied to stabilize the contaminants in place. Most of the earlier paint used was lead-based paint. More recently, various non-lead-based paints, such as two-part epoxy, are used. For D&D (decontamination and decommissioning), it is desirable to remove the paints or other coatings rather than having to tear down and dispose of the entire building. This report describes the use of pulse-repetetion laser systems for the removal of paints and coatings.

  19. Integrated Glass Coating Manufacturing Line

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor [Enki Technology Inc., San Jose, CA (United States)

    2015-09-30

    This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs and a detailed deployment plan for the equipment.

  20. Intumescent Coatings as Fire Retardants

    Science.gov (United States)

    Parker, J. A.; Fohlen, G. M.; Sawko, P. M.; Fish, R. H.

    1970-01-01

    The development of fire-retardant coatings to protect surfaces which may be exposed to fire or extreme heat is a subject of intense interest to many industries. A fire-retardant paint has been developed which represents a new chemical approach for preparing intumescent coatings, and potentially, is very important to fire-prevention authorities. The requirements for a superior coating include ease of application, suitability to a wide variety of surfaces and finishes, and stability over an extended period of time within a broad range of ambient temperature and humidity conditions. These innovative coatings, when activated by the heat of a fire, react to form a thick, low-density, polymeric coating or char layer. Water vapor and sulphur dioxide are released during the intumescent reaction. Two fire-protection mechanisms thus become available: (1) the char layer retards the flow of heat, due to the extremely low thermal conductivity; and (2) water vapor and sulfur dioxide are released, providing fire quenching properties. Still another mechanism functions in cases where the char, by virtue of its high oxidation resistance and low thermal conductivity, reaches a sufficiently high temperature to re-radiate much of the incident heat load. The coatings consist of dispersions of selective salts of a nitro-amino-arornatic compound. Specifically, para-nitroaniline bisulfate and the ammonium salt of para-nitroaniline-ortho sulphuric acid (2-amino-5-nitrobenzenesulphuric acid) are used. Suitable vehicles are cellulose nitrate of lacquer grade, a nitrite-phenolic modified rubber, or epoxy-polysulfide copolymer. Three separate formulations have been developed. A solvent is usually employed, such as methylethyl ketone, butyl acetate, or toluene, which renders the coatings suitably thin and which evaporates after the coatings are applied. Generally, the intumescent material is treated as insoluble in the vehicle, and is ground and dispersed in the vehicle and solvent like an

  1. Inhomogeneous interface laser mirror coatings.

    Science.gov (United States)

    Ledger, A M

    1979-09-01

    Methods of improving the durability of thin-film laser mirror coatings for 10.6 microm using thorium fluoride, zinc selenide, and zinc sulfide materials have been investigated. The largest improvement in film durability was obtained by using inhomogeneous interface fabrication for all the dielectric-dielectric interfaces and by incorporating cerium fluoride protective overcoating material into the film design. Experimental results are given for enhanced reflectors, polarization-selective coatings, and buried-grating aperture-sharing coatings designed for high-power laser applications.

  2. A novel trilayer antireflection coating using dip-coating technique

    Institute of Scientific and Technical Information of China (English)

    Jian Xu; Yi Yin; Haiming Ma; Hui Ye; Xu Liu

    2011-01-01

    We report a new structure for broadband antireflection coating by dip-coating technique,which has minimal cost and is compatible with large-scale manufacturing.The coatings are prepared by depositing SiO2 sol-gel film on a glass substrate,subsequently depositing SiO2 single-layer particle coating through electrostatic attraction,and depositing a final very thin Si02 sol-gel film to improve the mechanical strength of the whole coating structure.The refractive index of the structure changes gradually from the top to the substrate.The transmittance of a glass substrate has been experimentally found to be improved in the spectral range of 400-1400 nn and in the incidence angle range from 0° to at least 45°.The mechanical strength is immensely improved because of the additional thin Si02 sol-gel layer.The surface texture can be applied to the substrates of different materials and shapes as an add-on coating.

  3. Water permeability of pigmented waterborne coatings

    NARCIS (Netherlands)

    Donkers, P.A.J.; Huinink, H.P.; Erich, S.J.F.; Reuvers, N.J.W.; Adan, O.C.G.

    2013-01-01

    Coatings are used in a variety of applications. Last decades more and more coating systems are transforming from solvent to waterborne coating systems. In this study the influence of pigments on the water permeability of a waterborne coating system is studied, with special interest in the possible i

  4. Overlay metallic-cermet alloy coating systems

    Science.gov (United States)

    Gedwill, M. A.; Levine, S. R.; Glasgow, T. K. (Inventor)

    1984-01-01

    A substrate, such as a turbine blade, vane, or the like, which is subjected to high temperature use is coated with a base coating of an oxide dispersed, metallic alloy (cermet). A top coating of an oxidation, hot corrosion, erosion resistant alloy of nickel, cobalt, or iron is then deposited on the base coating. A heat treatment is used to improve the bonding. The base coating serves as an inhibitor to interdiffusion between the protective top coating and the substrate. Otherwise, the protective top coating would rapidly interact detrimentally with the substrate and degrade by spalling of the protective oxides formed on the outer surface at elevated temperatures.

  5. DLC coatings for hydraulic applications

    Institute of Scientific and Technical Information of China (English)

    Luca NOBILI; Luca MAGAGNIN

    2009-01-01

    Replacement of lubricating oils with water or low-viscosity fluids is highly desirable in many industrial fields, on account of the environmental and economical advantages. Low lubricity of water might be insufficient for proper operation of hydraulic components, and diamond-like carbon(DLC) coatings are very attractive as solid lubricant films. A remote-plasma PACVD process was utilized to deposit hydrogenated DLC coatings (a-C:H) on different substrates. Microindentation measurements show that the coating hardness is around 35 GPa. Tribological behavior was evaluated by block-on-ring tests performed in water and water with alumina. The wear rate was calculated after measuring the wear volume by a laser profilemeter. Morphological and compositional analysis of the wear tracks reveal that coating failure may occur by abrasive wear or delamination, depending on the substrate properties. Hard and smooth substrates give the best results and dispersed alumina particles increase the wear rate.

  6. Corrosion-resistant metallic coatings

    Directory of Open Access Journals (Sweden)

    F. Presuel-Moreno

    2008-10-01

    Full Text Available We describe recent computational and experimental studies on the corrosion properties of metallic coatings that can be tailored (tuned to deliver up to three corrosion-inhibiting functions to an underlying substrate. Attributes are tuned by a selection of alloy compositions and nanostructures, ideally in alloy systems that offer flexibility of choice to optimize the corrosion-resisting properties. An amorphous Al-based coating is tuned for corrosion protection by on-demand release of ionic inhibitors to protect defects in the coating, by formation of an optimized barrier to local corrosion in Cl− containing environments, as well as by sacrificial cathodic prevention. Further progress in this field could lead to the design of the next generation of adaptive or tunable coatings that inhibit corrosion of underlying substrates.

  7. Smart Coatings for Corrosion Protection

    Science.gov (United States)

    Calle, Luz Marina; Li, Wendy; Buhrow, Jerry W.; Johnsey, Marissa N.

    2016-01-01

    Nearly all metals and their alloys are subject to corrosion that causes them to lose their structural integrity or other critical functionality. It is essential to detect corrosion when it occurs, and preferably at its early stage, so that action can be taken to avoid structural damage or loss of function. Protective coatings are the most commonly used method of corrosion control. However, progressively stricter environmental regulations have resulted in the ban of many commercially available corrosion protective coatings due to the harmful effects of their solvents or corrosion inhibitors. This work concerns the development of a multifunctional, smart coating for the autonomous control of corrosion. This coating is being developed to have the inherent ability to detect the chemical changes associated with the onset of corrosion and respond autonomously to indicate it and control it.

  8. Cementless Hydroxyapatite Coated Hip Prostheses

    Directory of Open Access Journals (Sweden)

    Antonio Herrera

    2015-01-01

    Full Text Available More than twenty years ago, hydroxyapatite (HA, calcium phosphate ceramics, was introduced as a coating for cementless hip prostheses. The choice of this ceramic is due to its composition being similar to organic apatite bone crystals. This ceramic is biocompatible, bioactive, and osteoconductive. These qualities facilitate the primary stability and osseointegration of implants. Our surgical experience includes the implantation of more than 4,000 cementless hydroxyapatite coated hip prostheses since 1990. The models implanted are coated with HA in the acetabulum and in the metaphyseal area of the stem. The results corresponding to survival and stability of implants were very satisfactory in the long-term. From our experience, HA-coated hip implants are a reliable alternative which can achieve long term survival, provided that certain requirements are met: good design selection, sound choice of bearing surfaces based on patient life expectancy, meticulous surgical technique, and indications based on adequate bone quality.

  9. Corrosion-resistant metallic coatings

    OpenAIRE

    F. Presuel-Moreno; M.A. Jakab; N. Tailleart; Goldman, M.; J. R. Scully

    2008-01-01

    We describe recent computational and experimental studies on the corrosion properties of metallic coatings that can be tailored (tuned) to deliver up to three corrosion-inhibiting functions to an underlying substrate. Attributes are tuned by a selection of alloy compositions and nanostructures, ideally in alloy systems that offer flexibility of choice to optimize the corrosion-resisting properties. An amorphous Al-based coating is tuned for corrosion protection by on-demand release of ionic i...

  10. Hermetic Coating of Optical Fibers

    Science.gov (United States)

    1987-11-01

    of 450A/min. A number of bulk samples were coated with a-C:H including microscope slides, NaCl plates, ZBLAN fluoride glass and sapphire blanks. IR...deposition were identified. Bulk NaCl, sapphire and glass samples coated with - 1 micron thick films were tested analytically. With the information gathered...1.0 INTRODUCTION: The surface of a freshly drawn glass fiber while seemingly smooth has many imperfections which when under stress, can grow and

  11. Corrosion resistant neutron absorbing coatings

    Science.gov (United States)

    Choi, Jor-Shan [El Cerrito, CA; Farmer, Joseph C [Tracy, CA; Lee, Chuck K [Hayward, CA; Walker, Jeffrey [Gaithersburg, MD; Russell, Paige [Las Vegas, NV; Kirkwood, Jon [Saint Leonard, MD; Yang, Nancy [Lafayette, CA; Champagne, Victor [Oxford, PA

    2012-05-29

    A method of forming a corrosion resistant neutron absorbing coating comprising the steps of spray or deposition or sputtering or welding processing to form a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material. Also a corrosion resistant neutron absorbing coating comprising a composite material made of a spray or deposition or sputtering or welding material, and a neutron absorbing material.

  12. Effects of room-temperature tensile fatigue on critical current and n-value of IBAD-MOCVD YBa2Cu3O7-x /Hastelloy coated conductor

    Science.gov (United States)

    Rogers, Samuel; Kan Chan, Wan; Schwartz, Justin

    2016-08-01

    REBa2Cu3O7-x (REBCO) coated conductors potentially enable a multitude of superconducting applications, over a wide range of operating temperatures and magnetic fields, including high-field magnets, energy storage devices, motors, generators, and power transmission systems (Zhang et al 2013 IEEE Trans. Appl. Supercond. 23 5700704). Many of these are AC applications and thus the fatigue properties may be limiting (Vincent et al 2013 IEEE Trans. Appl. Supercond. 23 5700805). Previous electromechanical studies have determined the performance of REBCO conductors under single cycle loads (Barth et al 2015 Supercond. Sci. Technol. 28 045011), but an understanding of the fatigue properties is lacking. Here the fatigue behavior of commercial ion beam assisted deposition-metal organic chemical vapor deposition REBCO conductors on Hastelloy substrates is reported for axial tensile strains up to 0.5% and up to 100 000 cycles. Failure mechanisms are investigated via microstructural studies. Results show that REBCO conductors retained I c(ɛ)/I c0 = 0.9 for 10 000 cycles at ɛ = 0.35% and ɛ = 0.45% strain, and ɛ = 0.5% for 100 cycles. The main cause of fatigue degradation in REBCO conductors is crack propagation that initiates at the slitting defects that result from the manufacturing process.

  13. INNOVATIVE COATING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Asamatdinov Marat Orynbaevich

    2017-03-01

    Full Text Available Restoration of monuments of architecture is a sphere of activity which places particularly high demands on technical specialists and experts. It is necessary, depending on the objectives of restoration and finishing of a monument of architecture and its damages and defects, to select appropriate technologies and materials. Mineral substances as fillers, and inorganic (mineral colouring pigments, along with liquid potassium glass form an ultrastrong combination of materials. It gives to paints made of these mineral substances, an extremely high weather resistance and durability.The functional concept of silicate paints is the ability to silicify with other mineral construction materials. Silicate paints are the only colouring system which enters into chemical compound with the base due to the liquid potassium silicate properties. Also, bonds between quartzitic elements in its fillers are formed. As a result, it provides yet greater wear resistance and resistance to chalking. In ICA MGSU bachelors-technologists are given the "Facade Materials in the Modern Architecture of Buildings” course, in which special attention is paid to decorative coatings of various types; also, scientific research for improvement of paintwork material application technologies is performed. Cooperation of the higher school entities with technical assistance centres of construction firms makes it possible to enhance the quality of training and competence of graduates, as well as create favorable conditions for development of modern domestic technologies including those in the sphere of execution of architectural facades using innovative systems.

  14. Material Science Smart Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, A. I. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Sabirianov, R. F. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Namavar, Fereydoon [Univ. of Nebraska Medical Center, Omaha, NE (United States)

    2014-07-01

    The contribution of electrostatic interactions to the free energy of binding between model protein and a ceramic implant surface in the aqueous solvent, considered in the framework of the nonlocal electrostatic model, is calculated as a function of the implant low-frequency dielectric constant. We show that the existence of a dynamically ordered (low-dielectric) interfacial solvent layer at the protein-solvent and ceramic-solvent interface markedly increases charging energy of the protein and ceramic implant, and consequently makes the electrostatic contribution to the protein-ceramic binding energy more favorable (attractive). Our analysis shows that the corresponding electrostatic energy between protein and oxide ceramics depends nonmonotonically on the dielectric constant of ceramic, εC. Obtained results indicate that protein can attract electrostatically to the surface if ceramic material has a moderate εC below or about 35 (in particularly ZrO2 or Ta2O5). This is in contrast to classical (local) consideration of the solvent, which demonstrates an unfavorable electrostatic interaction of protein with typical metal oxide ceramic materials (εC>10). Thus, a solid implant coated by combining oxide ceramic with a reduced dielectric constant can be beneficial to strengthen the electrostatic binding of the protein-implant complex.

  15. Coating, Titanium Dioxide and Solar Cell

    OpenAIRE

    Yang, Aohan

    2011-01-01

    The objective of this bachelor’s thesis is to get basic ideas about coating and a deep understanding of properties of titanium dioxide pigments as well as their application and performance in solar electricity energy technology. This thesis consists of three main parts, eight chapters. The first part is about basic knowledge of coating and tests of coated paper. Coating pigments are generally introduced in the part. In the second part, coating additives are introduced in details from ...

  16. Silane based coating of aluminium mold

    DEFF Research Database (Denmark)

    2013-01-01

    having at least one closed cavity is provided, at least one surface of the at least one cavity being an aluminium surface coated with a silane based coating layer. The silane based anti-stiction coating improves the anti-stiction properties of the mold which may allow for molding and demolding...... of structures which would otherwise be difficult to mold. The resistance of the coated aluminium mold is significantly improved by applying a silane-based coating layer....

  17. Composite hydrophilic coating for conditioner aluminum fins

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    To solve the so-called "white rust" and 'water bridge" problems of the aluminum fins for heat exchanger of automobile air conditioner, aimed at nationalizing the art of hydrophilic coating technology, the choice of coating forming and curing materials was investigated. By measuring the water contact angle, SEM surface scanning and ingredients analysis of the coating, optimal parameters and composition are acquired. The coating forming mechanisms of the composition was also expatiated. The coating obtained has good hydrophilic and other properties.

  18. Switchable antifouling coatings and uses thereof

    Energy Technology Data Exchange (ETDEWEB)

    Denton, Michele L. Baca; Dirk, Shawn M.; Johnson, Ross Stefan

    2017-02-28

    The present invention relates to antifouling coatings capable of being switched by using heat or ultraviolet light. Prior to switching, the coating includes an onium cation component having antimicrobial and antibacterial properties. Upon switching, the coating is converted to a conjugated polymer state, and the cationic component is released with any adsorbed biofilm layer. Thus, the coatings herein have switchable and releasable properties. Methods of making and using such coatings are also described.

  19. Spray-Deposited Superconductor/Polymer Coatings

    Science.gov (United States)

    Wise, Stephanie A.; Tran, Sang Q.; Hooker, Matthew W.

    1993-01-01

    Coatings that exhibit the Meissner effect formed at relatively low temperature. High-temperature-superconductor/polymer coatings that exhibit Meissner effect deposited onto components in variety of shapes and materials. Simple, readily available equipment needed in coating process, mean coatings produced economically. Coatings used to keep magnetic fields away from electronic circuits in such cryogenic applications as magnetic resonance imaging and detection of infrared, and in magnetic suspensions to provide levitation and/or damping of vibrations.

  20. Graphene: corrosion-inhibiting coating.

    Science.gov (United States)

    Prasai, Dhiraj; Tuberquia, Juan Carlos; Harl, Robert R; Jennings, G Kane; Rogers, Bridget R; Bolotin, Kirill I

    2012-02-28

    We report the use of atomically thin layers of graphene as a protective coating that inhibits corrosion of underlying metals. Here, we employ electrochemical methods to study the corrosion inhibition of copper and nickel by either growing graphene on these metals, or by mechanically transferring multilayer graphene onto them. Cyclic voltammetry measurements reveal that the graphene coating effectively suppresses metal oxidation and oxygen reduction. Electrochemical impedance spectroscopy measurements suggest that while graphene itself is not damaged, the metal under it is corroded at cracks in the graphene film. Finally, we use Tafel analysis to quantify the corrosion rates of samples with and without graphene coatings. These results indicate that copper films coated with graphene grown via chemical vapor deposition are corroded 7 times slower in an aerated Na(2)SO(4) solution as compared to the corrosion rate of bare copper. Tafel analysis reveals that nickel with a multilayer graphene film grown on it corrodes 20 times slower while nickel surfaces coated with four layers of mechanically transferred graphene corrode 4 times slower than bare nickel. These findings establish graphene as the thinnest known corrosion-protecting coating.

  1. Polyester based hybrid organic coatings

    Science.gov (United States)

    Wang, Xiaojiang

    Polyesters are a class of polymers widely used in organic coatings applications. In this work, four types of organic coatings based on polyester polyols were prepared: UV-curable polyester/poly(meth)acrylate coatings, thermal curable polyester polyurethane-urea coatings, thermal curable non-isocyanate polyurethane coatings, and UV-curable non-isocyanate polyurethane coatings. Polyester/poly(meth)acrylate block copolymers are synthesized using a combination of polycondensation and Atom-Transfer Radical Polymerization (ATRP). All block copolymers are characterized by means of Nuclear Magnetic Resonance (NMR) and Gel Permeation Chromatography (GPC). In the case of unsaturated-polyester-based block copolymers the main chain double bond in the polyester backbone remains almost unaffected during ATRP. The unsaturated block copolymers are crosslinkable and can form networks upon photo-irradiation in the presence of a suitable photoinitiator. These copolymers might be interesting candidates for coatings with better overall properties than those based on neat polyesters. Thermal curable polyester polyol based Polyurethane-Urea (PUU) coatings were formulated using Partially Blocked HDI isocyanurate (PBH), Isophorone Diamine (IPDA), and polyester polyol. As a comparison, the polyurethane coatings (PU) without adding IPDA were also prepared. The mechanical and viscoelastic properties of the PUU and PU coating were investigated by using tensile test and Dynamic Mechanical Thermal Analyzer (DMTA). It was found that PUU coating exhibited higher crosslink density, Tg, tensile modulus and strength than the corresponding PU coating. Thermal curable non-isocyanate polyurethane coatings were prepared by using polyamine and cyclic carbonate terminated polyester. Cyclic carbonate terminated polyester was synthesized from the reaction of the carbon dioxide and epoxidized polyester which was prepared from the polyester polyol. The properties of the epoxidized and cyclic carbonate

  2. Coatings and Tints of Spectacle Lenses

    Directory of Open Access Journals (Sweden)

    H. Zeki Büyükyıldız

    2012-10-01

    Full Text Available Spectacle lenses are made of mineral or organic (plastic materials. Various coatings and tints are applied to the spectacle lenses according to the characteristic of the lens material, and for the personal needs and cosmetic purpose. The coatings may be classified in seven groups: 1 Anti-reflection coatings, 2 Hard coatings, 3 Clean coat, 4 Mirror coatings, 5 Color tint coating (one of coloring processes, 6 Photochromic coating (one of photochromic processes, and 7 Anti-fog coatings. Anti-reflection coatings reduce unwanted reflections from the lens surfaces and increase light transmission. Hard coatings are applied for preventing the plastic lens surface from scratches and abrasion. Hard coatings are not required for the mineral lenses due to their hardness. Clean coat makes the lens surface smooth and hydrophobic. Thus, it prevents the adherence of dust, tarnish, and dirt particles on the lens surface. Mirror coatings are applied onto the sunglasses for cosmetic purpose. Color tinted and photochromic lenses are used for sun protection and absorption of the harmful UV radiations. Anti-fog coatings make the lens surface hydrophilic and prevent the coalescence of tiny water droplets on the lens surface that reduces light transmission. (Turk J Ophthalmol 2012; 42: 359-69

  3. Coating Carbon Fibers With Platinum

    Science.gov (United States)

    Effinger, Michael R.; Duncan, Peter; Coupland, Duncan; Rigali, Mark J.

    2007-01-01

    A process for coating carbon fibers with platinum has been developed. The process may also be adaptable to coating carbon fibers with other noble and refractory metals, including rhenium and iridium. The coated carbon fibers would be used as ingredients of matrix/fiber composite materials that would resist oxidation at high temperatures. The metal coats would contribute to oxidation resistance by keeping atmospheric oxygen away from fibers when cracks form in the matrices. Other processes that have been used to coat carbon fibers with metals have significant disadvantages: Metal-vapor deposition processes yield coats that are nonuniform along both the lengths and the circumferences of the fibers. The electrical resistivities of carbon fibers are too high to be compatible with electrolytic processes. Metal/organic vapor deposition entails the use of expensive starting materials, it may be necessary to use a furnace, and the starting materials and/or materials generated in the process may be hazardous. The present process does not have these disadvantages. It yields uniform, nonporous coats and is relatively inexpensive. The process can be summarized as one of pretreatment followed by electroless deposition. The process consists of the following steps: The surfaces of the fiber are activated by deposition of palladium crystallites from a solution. The surface-activated fibers are immersed in a solution that contains platinum. A reducing agent is used to supply electrons to effect a chemical reduction in situ. The chemical reduction displaces the platinum from the solution. The displaced platinum becomes deposited on the fibers. Each platinum atom that has been deposited acts as a catalytic site for the deposition of another platinum atom. Hence, the deposition process can also be characterized as autocatalytic. The thickness of the deposited metal can be tailored via the duration of immersion and the chemical activity of the solution.

  4. Kinetic regulation of coated vesicle secretion

    CERN Document Server

    Foret, Lionel

    2008-01-01

    The secretion of vesicles for intracellular transport often rely on the aggregation of specialized membrane-bound proteins into a coat able to curve cell membranes. The nucleation and growth of a protein coat is a kinetic process that competes with the energy-consuming turnover of coat components between the membrane and the cytosol. We propose a generic kinetic description of coat assembly and the formation of coated vesicles, and discuss its implication to the dynamics of COP vesicles that traffic within the Golgi and with the Endoplasmic Reticulum. We show that stationary coats of fixed area emerge from the competition between coat growth and the recycling of coat components, in a fashion resembling the treadmilling of cytoskeletal filaments. We further show that the turnover of coat components allows for a highly sensitive switching mechanism between a quiescent and a vesicle producing membrane, upon a slowing down of the exchange kinetics. We claim that the existence of this switching behaviour, also tri...

  5. Design of Polymer Coatings in Automotive Engines

    Institute of Scientific and Technical Information of China (English)

    LIAO Han-lin; ZHANG Ga; BORDES Jean-Michel; CHRISTIAN Coddet

    2004-01-01

    Driven by economical and ecological reasons, thermoplastics based coatings were more and more used in automotive engines. Two design concepts, flame spraying and serigraphy PEEK coatings on light metal substrate, were introduced in this paper. The friction and wear behavior of PEEK based coatings were investigated systematically. Coatings with different crystallinities can be obtained when cooling speed is controlled. Among three sprayed coatings considered with different crystallinities, the one with highest crystallinity exhibits best friction and wear behavior under dry sliding condition. Under lubricated sliding condition, however, the amorphous coating gives lower friction coefficient. The micron particles such as SiC,MoS2 and graphite in composite coatings can improve significantly the coating wear resistance and have a impact on coating friction behavior.

  6. Microstructure and Residual Stress of Shot Coating

    Science.gov (United States)

    Itoh, Yoshiyasu; Suyama, Shoko; Fuse, Toshiaki

    A shot coating process for metalizing at the surface of ceramics has been newly developed as the shot peening treatment. However, microstructure and residual stress of shot coatings, which have an important effect on the adherent strength of coatings and the strength of ceramic substrates, have not always been clarified. An experimental investigation on the microstructure and residual stress was carried out for the shot coating of aluminum on zinc-oxide substrate by comparison with the atmospheric plasma sprayed aluminum coatings. As a result, low porosity, low oxide content and flat surface could be obtained from the aluminum coatings formed by shot coating process in comparison with the atmospheric plasma sprayed aluminum coatings. Also, it was confirmed by the X-ray diffraction technique that the residual stress of shot coated aluminum over zinc-oxide substrate was high compressive in comparison with the atmospheric plasma spraying process.

  7. Coating Microstructure-Property-Performance Issues

    Energy Technology Data Exchange (ETDEWEB)

    Terry C. Totemeier; Richard N. Wright

    2005-05-01

    Results of studies on the relationships between spray parameters and performance of thermally-sprayed intermetallic coatings for high-temperature oxidation and corrosion resistance are presented. Coating performance is being assessed by corrosion testing of free-standing coatings, thermal cycling of coating substrates, and coating ductility measurement. Coating corrosion resistance was measured in a simulated coal combustion gas environment (N2-CO-CO2-H2O-H2S) at temperatures from 500 to 800°C using thermo-gravimetric analysis (TGA). TGA testing was also performed on a typical ferritic-martensitic steel, austenitic stainless steel, and a wrought Fe3Al-based alloy for direct comparison to coating behavior. FeAl and Fe3Al coatings showed corrosion rates slightly greater than that of wrought Fe3Al, but markedly lower than the steels at all temperatures. The corrosion rates of the coatings were relatively independent of temperature. Thermal cycling was performed on coated 316SS and nickel alloy 600 substrates from room temperature to 800°C to assess the relative effects of coating microstructure, residual stress, and thermal expansion mismatch on coating cracking by thermal fatigue. Measurement of coating ductility was made by acoustic emission monitoring of coated 316SS tensile specimens during loading.

  8. Sputtering process and apparatus for coating powders

    Science.gov (United States)

    Makowiecki, Daniel M.; Kerns, John A.; Alford, Craig S.; McKernan, Mark A.

    2002-01-01

    A process and apparatus for coating small particles and fibers. The process involves agitation by vibrating or tumbling the particles or fibers to promote coating uniformly, removing adsorbed gases and static charges from the particles or fibers by an initial plasma cleaning, and coating the particles or fibers with one or more coatings, a first coating being an adhesion coating, and with subsequent coatings being deposited in-situ to prevent contamination at layer interfaces. The first coating is of an adhesion forming element (i.e. W, Zr, Re, Cr, Ti) of a 100-10,000 .ANG. thickness and the second coating or final coating of a multiple (0.1-10 microns) being Cu or Ag, for example for brazing processes, or other desired materials that defines the new surface related properties of the particles. An essential feature of the coating process is the capability to deposit in-situ without interruption to prevent the formation of a contaminated interface that could adversely affect the coating adhesion. The process may include screening of the material to be coated and either continuous or intermittent vibration to prevent agglomeration of the material to be coated.

  9. Vertebrate extracellular preovulatory and postovulatory egg coats.

    Science.gov (United States)

    Menkhorst, Ellen; Selwood, Lynne

    2008-11-01

    Extracellular egg coats deposited by maternal or embryonic tissues surround all vertebrate conceptuses during early development. In oviparous species, the time of hatching from extracellular coats can be considered equivalent to the time of birth in viviparous species. Extracellular coats must be lost during gestation for implantation and placentation to occur in some viviparous species. In the most recent classification of vertebrate extracellular coats, Boyd and Hamilton (Cleavage, early development and implantation of the egg. In: Parkes AS (ed.), Marshall's Physiology of Reproduction, vol. 2, 3rd ed. London: Longmans, Green & Co; 1961:1-126) defined the coat synthesized by the oocyte during oogenesis as primary and the coat deposited by follicle cells surrounding the oocyte as secondary. Tertiary egg coats are those synthesized and deposited around the primary or secondary coat by the maternal reproductive tract. This classification is difficult to reconcile with recent data collected using modern molecular biological techniques that can accurately establish the site of coat precursor synthesis and secretion. We propose that a modification to the classification by Boyd and Hamilton is required. Vertebrate egg coats should be classed as belonging to the following two broad groups: the preovulatory coat, which is deposited during oogenesis by the oocyte or follicle cells, and the postovulatory coats, which are deposited after fertilization by the reproductive tract or conceptus. This review discusses the origin and classification of vertebrate extracellular preovulatory and postovulatory coats and illustrates what is known about coat homology between the vertebrate groups.

  10. Diffusion Barrier Coating System and Oxidation Behavior of Coated Alloys

    Institute of Scientific and Technical Information of China (English)

    T.NARITA

    2009-01-01

    @@ 1 Introduction Research into the formation of Re-based alloys is in progress in our laboratory to provide a diffusion barrier layer between heat-resistant alloys and Al reservoir layers, which assist in the formation and maintenance a protective Al2O3 scale for long periods. Coatings with a two-layered structure comprised of inner Re-based alloy layer and outer β-NiAl layer with or without Pt addition were successfully formed on various heat resistant alloys such as Ni-based singlecrystal superalloys, Ni-based heat resistant alloys, NiMo based alloy, Ni-Cr based alloy, and Fe-based alloys. The duplex layer coating proposed is generally termed a diffusion barrier coating system; DBC system.

  11. Photo Surfing in Blade Runner

    Science.gov (United States)

    Ohler, Jason

    2005-01-01

    This month's "Mining Movies" looks at Blade Runner, Ridley Scott's film set in the year 2019. It is a sad time for Earth, which is in the midst of environmental degradation so severe that other planets are being prepared for colonization. The main source of labor for this preparation work are "replicants," organic robots that look and behave like…

  12. Testing and Evaluation of Multifunctional Smart Coatings

    Science.gov (United States)

    Buhrow, Jerry; Li, Wenyan; Jolley, Scott; Calle, Luz M.; Pearman, Benjamin; Zhang, Xuejun

    2015-01-01

    A smart coating system, based on pH sensitive microcontainers (microparticles and microcapsules) has been developed. Various corrosion inhibitors have been encapsulated and incorporated into commercial and formulated coatings to test the functionality imparted on the coating by the incorporation of the inhibitor microcontainers. Coated carbon steel and aluminum alloy panels were tested using salt immersion, salt fog, and coastal atmospheric exposure conditions. This paper provides the details on coating sample preparation, evaluation methods, as well as test results of the inhibiting function of smart coatings.

  13. Chromate conversion coatings and their current application

    Directory of Open Access Journals (Sweden)

    P. Pokorny

    2016-04-01

    Full Text Available This paper describes formation, composition and possible production technologies of application chromate coatings. Summation of common examples of applications of these coatings in corrosion protection of metals and alloys is provided. Individual chromate coatings are divided by their dominant anions either with CrVI or CrIII. Restrictions of chromate coatings with dominantly CrVI and related toxicity of hexavalent chromium is discussed in detail. In conclusion, examples of both chromium and other, alternative coatings are summed up. Application of these coatings as a protection for concrete hot-dip galvanized reinforcement is also reviewed.

  14. Dielectric Coatings for IACT Mirrors

    CERN Document Server

    Förster, A; Chadwick, P; Held, M

    2013-01-01

    Imaging Atmospheric Cherenkov Telescopes for very-high energy gamma-ray astronomy need mirror with high reflectance roughly in the wavelength between 300 and 550 nm. The current standard reflective layer of such mirrors is aluminum. Being permanently exposed to the environment they show a constant degradation over the years. New and improved dielectric coatings have been developed to enhance their resistance to environmental impact and to extend their possible lifetime. In addition, these customized coatings have an increased reflectance of over 95% and are designed to significantly lower the night-sky background contribution. The development of such coatings for mirrors with areas up to 2 m2 and low application temperatures to suite the composite materials used for the new mirror susbtrates of the Cherenkov Telescope Array (CTA) and the results of extensive durability tests are presented.

  15. Mixed zirconia calcium phosphate coatings for dental implants: Tailoring coating stability and bioactivity potential

    Energy Technology Data Exchange (ETDEWEB)

    Pardun, Karoline [University of Bremen, Advanced Ceramics, Am Biologischen Garten 2, 28359 Bremen (Germany); Treccani, Laura, E-mail: treccani@uni-bremen.de [University of Bremen, Advanced Ceramics, Am Biologischen Garten 2, 28359 Bremen (Germany); Volkmann, Eike [University of Bremen, Advanced Ceramics, Am Biologischen Garten 2, 28359 Bremen (Germany); Streckbein, Philipp [University Hospital, Justus-Liebig-University Giessen, Department of Cranio-Maxillo-Facial Surgery, Klinikstrasse 33, 35385 Giessen (Germany); Heiss, Christian [University Hospital of Giessen-Marburg, Department of Trauma Surgery, Rudolf-Buchheim-Strasse 7, 35385 Giessen, Germany, (Germany); Laboratory of Experimental Surgery, Kerkraderstrasse 9, 35392 Giessen (Germany); Destri, Giovanni Li; Marletta, Giovanni [Laboratory for Molecular Surfaces and Nanotechnology (LAMSUN), Department of Chemistry, University of Catania and CSGI, Viale A. Doria 6, 95125 Catania (Italy); Rezwan, Kurosch [University of Bremen, Advanced Ceramics, Am Biologischen Garten 2, 28359 Bremen (Germany)

    2015-03-01

    Enhanced coating stability and adhesion are essential for long-term success of orthopedic and dental implants. In this study, the effect of coating composition on mechanical, physico-chemical and biological properties of coated zirconia specimens is investigated. Zirconia discs and dental screw implants are coated using the wet powder spraying (WPS) technique. The coatings are obtained by mixing yttria-stabilized zirconia (TZ) and hydroxyapatite (HA) in various ratios while a pure HA coating served as reference material. Scanning electron microscopy (SEM) and optical profilometer analysis confirm a similar coating morphology and roughness for all studied coatings, whereas the coating stability can be tailored with composition and is probed by insertion and dissections experiments in bovine bone with coated zirconia screw implants. An increasing content of calcium phosphate (CP) resulted in a decrease of mechanical and chemical stability, while the bioactivity increased in simulated body fluid (SBF). In vitro experiments with human osteoblast cells (HOB) revealed that the cells grew well on all samples but are affected by dissolution behavior of the studied coatings. This work demonstrates the overall good mechanical strength, the excellent interfacial bonding and the bioactivity potential of coatings with higher TZ contents, which provide a highly interesting coating for dental implants. - Highlights: • Different ratios of zirconia (TZ) and calcium phosphate (CP) were deposited on zirconia substrates. • Enhancement of TZ content in mixed coatings increased coating stability. • Enhancement of CP content in mixed coatings increased bioactivity. • All tested coating compositions were non-toxic.

  16. A Shoulder Surfing Resistant Graphical Passwords Scheme for Mobile Terminal%一种面向移动终端的抗肩窥图形密码方案

    Institute of Scientific and Technical Information of China (English)

    黄叶珏; 郑河荣

    2015-01-01

    Passwords authentication is still one of the main authentication modes for mobile terminal. Mobile terminal is vulnerable to shoulder surfing attack because of using in complex environments. Absorbing the design thought of adding interference graph from the pass-object graphical password scheme,a shoulder surfing resistant graphical passwords scheme for mobile terminal is proposed,in which the graphical passwords are generated by characters and colors. In the scheme,just by clicking the screen user can complete the whole log-in phase,the scheme design completely conforms to the use habit of touch type mobile terminal user. The security analysis shows that the scheme has good security in the password space and accidental login resistance,and can effectively resist the shoulder surfing attack in that the login process is recorded repeatedly.%密码认证目前仍然是移动终端主流身份认证方式之一。移动终端由于其使用环境的复杂性,密码容易遭受肩窥攻击。针对这种情况,文中吸取Pass-Object经典图形密码方案加入干扰图形的设计思想并加以改进,提出了一种面向移动终端的抗肩窥图形密码方案,方案以字符和颜色为基础生成图形密码。方案的设计完全符合触摸式移动终端用户的使用习惯,整个认证过程用户只需在触摸屏上点击即可完成操作。安全性分析数据表明:方案在密码空间和抗意外登陆方面都安全性良好,而且可有效抵御登陆过程被多次录制的肩窥攻击。

  17. Clean diffusion coatings by chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Warnes, B.M.; Punola, D.C. [Howmet Thermatech Coatings, Whitehall, MI (United States)

    1997-10-01

    An experimental program was undertaken to identify diffusion coating impurities introduced by standard aluminizing processes and to evaluate the impact of those impurities on oxidation resistance of the resultant Pt aluminide coating. IN-738 tabs and foils were platinum-electroplated, and then aluminized using three different processes: high-activity pack cementation, high-activity CVD and low-activity CVD. The results suggest that aluminizing processes which involve aluminum bearing alloys in the coating retort with H{sub 2} or H{sub 2}/HCl gas at high temperature can contaminate the diffusion coating during deposition. CVD low-activity aluminizing (coating gas generated at low temperature outside the coating chamber from 99.999% Al) did not introduce any coating impurities. In addition, the data indicates that harmful impurities from the IN-738 substrate (sulfur, boron and tungsten) and the electroplating process (phosphorus) were removed from the coating during deposition. The CVD low-activity Pt aluminide coating was the `cleanest` in the study, and it exhibited the best high-temperature oxidation resistance of the coatings considered. It can be concluded that trace elements in diffusion coatings from the superalloy substrate and/or the aluminizing process can adversely effect the oxidation resistance of those coatings, and that CVD low-activity aluminizing yields cleaner coatings than other commercially available aluminizing techniques. (orig.) 10 refs.

  18. Nano-Ceramic Coated Plastics

    Science.gov (United States)

    Cho, Junghyun

    2013-01-01

    Plastic products, due to their durability, safety, and low manufacturing cost, are now rapidly replacing cookware items traditionally made of glass and ceramics. Despite this trend, some still prefer relatively expensive and more fragile ceramic/glassware because plastics can deteriorate over time after exposure to foods, which can generate odors, bad appearance, and/or color change. Nano-ceramic coatings can eliminate these drawbacks while still retaining the advantages of the plastic, since the coating only alters the surface of the plastic. The surface coating adds functionality to the plastics such as self-cleaning and disinfectant capabilities that result from a photocatalytic effect of certain ceramic systems. These ceramic coatings can also provide non-stick surfaces and higher temperature capabilities for the base plastics without resorting to ceramic or glass materials. Titanium dioxide (TiO2) and zinc oxide (ZnO) are the candidates for a nano-ceramic coating to deposit on the plastics or plastic films used in cookware and kitchenware. Both are wide-bandgap semiconductors (3.0 to 3.2 eV for TiO2 and 3.2 to 3.3 eV for ZnO), so they exhibit a photocatalytic property under ultraviolet (UV) light. This will lead to decomposition of organic compounds. Decomposed products can be easily washed off by water, so the use of detergents will be minimal. High-crystalline film with large surface area for the reaction is essential to guarantee good photocatalytic performance of these oxides. Low-temperature processing (nano-ceramic coatings (TiO2, ZnO) on plastic materials (silicone, Teflon, PET, etc.) that can possess both photocatalytic oxide properties and flexible plastic properties. Processing cost is low and it does not require any expensive equipment investment. Processing can be scalable to current manufacturing infrastructure.

  19. Matching Performance among Visible and near Infrared Coating, Low Infrared Emitting Coating and Microwave Absorbing Coating

    Institute of Scientific and Technical Information of China (English)

    XIE Guohua; ZHANG Zuoguang; WU Ruibin

    2005-01-01

    The matching performance among the visible and near infrared conting, the low infrared emitting coating and the microwave absorbing coating was investigated. Experimental results shaw that the resulting material is characteristic of wideband effect ranging from the visible, near infrared and 3-5μm, 8- 14 μm infrared portion of the spectrum, as well as the radar region from 8 to 18 GHz when these three materials form a layerstructure material system. The microwave absorbing ability of material is hardly changed. The resonance peak moves towards lower frequency as the thickness of the visible, near infrared coating and the low infrared emitting coating increases. This problem can be resolved by controlling the thickness of the material. On the other hand,the infrared emissivity ε of the material system increases as the thickness of the visible, near infrared coating increases. This can be resolved by increasing infrared transparency of the visible and near infrared topcoating or controlling its thickness. The experimental resulting material system has spectral reflection characteristics in visible and near infrared regions that are similar to those of the natural bnckground.

  20. Corrosion-resistant coating development

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, D.P.; Kupp, D.M.; Martin, R.L. [Oak Ridge National Lab., TN (United States)

    1997-12-01

    SiC-based heat exchangers have been identified as the prime candidate material for use as heat exchangers in advanced combined cycle power plants. Unfortunately, hot corrosion of the SiC-based materials created by alkali metal salts present in the combustion gases dictates the need for corrosion-resistant coatings. The well-documented corrosion resistance of CS-50 combined with its low (and tailorable) coefficient of thermal expansion and low modulus makes CS-50 an ideal candidate for this application. Coatings produced by gelcasting and traditional particulate processing have been evaluated.

  1. Thin Films for Coating Nanomaterials

    Institute of Scientific and Technical Information of China (English)

    S.M.Mukhopadhyay; P.Joshi; R.V.Pulikollu

    2005-01-01

    For nano-structured solids (those with one or more dimensions in the 1-100 nm range), attempts of surface modification can pose significant and new challenges. In traditional materials, the surface coating could be several hundreds nanometers in thickness, or even microns and millimeters. In a nano-structured material, such as particle or nanofibers, the coating thickness has to be substantially smaller than the bulk dimensions (100 nm or less), yet be durable and effective. In this paper, some aspects of effective nanometer scale coatings have been discussed. These films have been deposited by a non-line of sight (plasma)techniques; and therefore, they are capable of modifying nanofibers, near net shape cellular foams, and other high porosity materials. Two types of coatings will be focused upon: (a) those that make the surface inert and (b) those designed to enhance surface reactivity and bonding. The former has been achieved by forming 1-2 nm layer of -CF2- (and/or CF3) groups on the surface, and the latter by creating a nanolayer of SiO2-type compound. Nucleation and growth studies of the plasma-generated film indicate that they start forming as 2-3 nm high islands that grow laterally, and eventually completely cover the surface with 2-3nm film. Contact angle measurements indicate that these nano-coatings are fully functional even before they have achieved complete coverage of 2-3 nm. They should therefore be applicable to nano-structural solids.This is corroborated by application of these films on vapor grown nanofibers of carbon, and on graphitic foams. Coated and uncoated materials are infiltrated with epoxy matrix to form composites and their microstructure, as well as mechanical behaviors are compared. The results show that the nano-oxide coating can significantly enhance bond formation between carbon and organic phases, thereby enhancing wettability,dispersion, and composite behavior. The fluorocarbon coating, as expected, reduces bond formation, and

  2. Protective Coatings for Aluminum Torpedoes

    Science.gov (United States)

    1983-06-01

    dhesion test, the entire coating sys- tea was removed, leaving the substrate exposed. During the impact tests, the 37 coating debonded within the...M tree ot detects in mawnai or dccrqva~e Weyesi aoicti cr Wi15 ryafsX-_ oa ifani w Aobgaon -rlefl CrS~ t1 hi~~~~~~~~ cadsoie.xrn a gab on srd... Eczema , rash Eye contact: Fodwith stemof water Inhalation Fresh Air Ingestion Call Physician for advice. DO NOT induce vomiting Skin contact Wash

  3. RECENT TECHNIQUES OF PHARMACEUTICAL SOLVENTLESS COATING: A REVIEW

    Directory of Open Access Journals (Sweden)

    Shital Dhuppe , S.S. Mitkare*, D.M. Sakarkar

    2012-07-01

    Full Text Available The coating of solid pharmaceutical dosage forms began in the 9th century B. C., with the Egyptians. Conventional coating techniques are based on solvents or water. Solventless coatings are alternative technique of coating. In solventless coating, the coating material is directly spread on the core and then it is cured by special method to form coat. Solventless coating avoids the use of water or it reduces to very small amounts with respect to the coating material hence it overcomes the limitations of conventional coating such as need for time, energy consuming, drying steps and the most important drug stability issues. A variety of solventless coating approaches are described in this review as powder coating, hot melt coating, supercritical fluid coating, magnetically assisted impaction coating, Plasma enhanced chemical vapor deposition. This review summarizes basic principle and process of the coating techniques.

  4. Development of coatings for fusion power applications

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L. E-mail: dalesmith@anl.gov; Konys, J.; Muroga, T.; Evitkhin, V

    2002-12-01

    Coatings have been proposed as the solution to critical materials constraints for most of the blanket concepts under development for fusion power applications. However, the international programs on coating development are focused primarily on electrically insulating coatings to mitigate the magneto-hydrodynamic pressure drop in self-cooled lithium/vanadium blanket concepts, and on tritium permeation barriers to reduce tritium permeation from Pb-Li into the water coolant in water-cooled Pb-Li concepts. Emphasis of the insulator coating development is on CaO and AlN coatings formed on vanadium alloys either in situ in lithium or by vapor deposition processes. The tritium barrier coating development is focused on Al{sub 2}O{sub 3} formed on aluminized martensitic steels by several processes. This paper presents an overview of the fundamental materials issues associated with the various coatings and the status of coating development for the various applications.

  5. Durable Dust Repellent Coating for Metals Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Durable Dust Repellent Coating (DDRC) consists of nano-phase silica, titania, or other oxide coatings to repel dust in a vacuum environment over a wide range of...

  6. Genetics Home Reference: Coats plus syndrome

    Science.gov (United States)

    ... Coats disease plus abnormalities of the brain, bones, gastrointestinal system, and other parts of the body. Coats disease ... life-threatening complications including abnormal bleeding in the gastrointestinal tract, high blood pressure in the vein that supplies ...

  7. Novel alginate based coatings on Mg alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sangeetha, K.; Roy, Abhijit [Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Singh, Satish [Department of Chemical Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Lee, Boeun [Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Kumta, Prashant N., E-mail: pkumta@pitt.edu [Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Department of Chemical Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Center for Craniofacial Regeneration, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Center for Complex Engineered Multifunctional Materials, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261 (United States)

    2011-12-15

    Coatings on yttrium doped magnesium (Mg4Y) alloy substrates were prepared using alginate hydrogels by dip coating method to improve the surface bioactive properties of the substrate. Furthermore, composite coatings containing nano-sized calcium phosphate corresponding to hydroxyapatite (HA) phase entrapped within alginate hydrogel were also synthesized on the Mg4Y substrates. Surface characteristics of these coated substrates have been investigated using FTIR-ATR, SEM and EDS. The results show that the coatings with alginate alone are not stable in vitro; however, incorporation of NanoCaPs slightly improves the stability of these coatings. In addition, these composite coatings showed cell attachments with fibronectin incorporation. These results indicate that alginate hydrogels have the potential to be used as bioactive coating materials for different biofunctional applications.

  8. STUDY ON VISCOELASTIC BEHAVIOR OF PAPER COATING

    Institute of Scientific and Technical Information of China (English)

    Heng Zhang; Kefu Chen; Rendang Yang

    2004-01-01

    The flow behavior of paper coating is critical to the coating operation. In this work, the influence of the added agents on the flow behavior and the viscoelastic behavior is investigated using rheometer in steady and dynamic oscillatory modes.

  9. Improving thermal barrier coatings by laser remelting.

    Science.gov (United States)

    Múnez, C J; Gómez-García, J; Sevillano, F; Poza, P; Utrilla, M V

    2011-10-01

    Thermal barrier coatings are extensively used to protect metallic components in applications where the operating conditions include aggressive environment at high temperatures. These coatings are usually processed by thermal spraying techniques and the resulting microstructure includes thin and large splats, associated with the deposition of individual droplets, with porosity between splats. This porosity reduces the oxidation and corrosion resistance favouring the entrance of aggressive species during service. To overcome this limitation, the top coat could be modified by laser glazing reducing surface roughness and sealing open porosity. ZrO2(Y2O3) top coat and NiCrAlY bond coating were air plasma sprayed onto an Inconel 600 Ni base alloy. The top coat was laser remelted and a densified ceramic layer was induced in the top surface of the ceramic coating. This layer inhibited the ingress of aggressive species and delayed bond coat oxidation.

  10. Stress and structure development in polymeric coatings

    Science.gov (United States)

    Vaessen, Diane Melissa

    2002-09-01

    The main goal of this research is to measure the stress evolution in various polymer coating systems to establish the mechanisms responsible for stress development, stress relaxation, and defect formation. Investigated systems include ultraviolet (UV)-curable coatings, dense and porous coatings from polymer solutions, and latex coatings. Coating stress was measured using a controlled environment stress apparatus based on a cantilever deflection principle. For acrylate coatings, it was found that by cycling a UV-lamp on and off, keeping the total dose constant, coating stress was lowered by 60% by decreasing the cycle period. A stress minimum was also found to exist for a given dose of radiation. The lower stress is attributed to stress relaxation and/or slower reaction during dark periods. A viscoelastic stress model of this process was formulated and predicted stress values close to those observed experimentally. During drying of cellulose acetate (CA) coatings cast in acetone, final stress increased from 10 to 45 MPa as coating thickness decreased from 60 to 10 mum. This thickness dependent coating stress for a solvent-cast polymer coating is a new finding and is attributed to (1) less shrinkage in thicker coatings due to more trapped solvent (from skinning) and (2) greater amounts of polymer stress relaxation in thicker coatings. For porous CA coatings prepared by dry-cast phase separation, final in-plane stresses ranged from 20 MPa for coatings containing small pores (˜1 mum) to 5 MPa for coatings containing small pores and macrovoids (˜200 mum). For these coatings, a small amount of stress relaxation occurs due to capillary pressure relief. A stress plateau for the macrovoid-containing coating is likely caused by stress-induced rupture of the polymer-rich phase. Measured stress in pigment-free latex coatings was much lower (˜0.3 MPa) than UV-curable and solvent-cast polymer coatings and was found to increase with increasing latex glass transition

  11. Microneedle Coating Techniques for Transdermal Drug Delivery

    OpenAIRE

    Rita Haj-Ahmad; Hashim Khan; Muhammad Sohail Arshad; Manoochehr Rasekh; Amjad Hussain; Susannah Walsh; Xiang Li; Ming-Wei Chang; Zeeshan Ahmad

    2015-01-01

    Drug administration via the transdermal route is an evolving field that provides an alternative to oral and parenteral routes of therapy. Several microneedle (MN) based approaches have been developed. Among these, coated MNs (typically where drug is deposited on MN tips) are a minimally invasive method to deliver drugs and vaccines through the skin. In this review, we describe several processes to coat MNs. These include dip coating, gas jet drying, spray coating, electrohydrodynamic atomisat...

  12. Deposition and Coating Properties on CVD Tungsten

    Institute of Scientific and Technical Information of China (English)

    DU Ji-hong; LI Zheng-xiang; LIU Gao-jian; ZHOU Hui-Huang; CHUN liang

    2004-01-01

    Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.

  13. Sputter coating of microspherical substrates by levitation

    Science.gov (United States)

    Lowe, A.T.; Hosford, C.D.

    Microspheres are substantially uniformly coated with metals or nonmetals by simltaneously levitating them and sputter coating them at total chamber pressures less than 1 torr. A collimated hole structure comprising a parallel array of upwardly projecting individual gas outlets is machined out to form a dimple. Glass microballoons,, which are particularly useful in laser fusion applications, can be substantially uniformly coated using the coating method and apparatus.

  14. Cirrus Dopant Nano-Composite Coatings

    Science.gov (United States)

    2014-11-01

    Inorganic Nano-particles • Ti • Zr • Al • Zn • Yr • Si Coatings • Au • Ag • Sn • Cu • Zn • Ni • NiB • NiCo • NiP cirrus Broadened...1000 1200 HARDNESS (HV) MICROHARDNESS - ELECTROLESS NIP STANDARD COATING TI DOPED COATING ZR DOPED COATING ↑74% Standard DC NiB Cirrus DC NiB 15

  15. RECENT TECHNIQUES OF PHARMACEUTICAL SOLVENTLESS COATING: A REVIEW

    OpenAIRE

    Shital Dhuppe , S.S. Mitkare*, D.M. Sakarkar

    2012-01-01

    The coating of solid pharmaceutical dosage forms began in the 9th century B. C., with the Egyptians. Conventional coating techniques are based on solvents or water. Solventless coatings are alternative technique of coating. In solventless coating, the coating material is directly spread on the core and then it is cured by special method to form coat. Solventless coating avoids the use of water or it reduces to very small amounts with respect t...

  16. Coating thickness control in continuously fabricating metallic glass-coated composite wires

    Science.gov (United States)

    Zhang, Bao-yu; Chen, Xiao-hua; Lu, Zhao-ping; Hui, Xi-dong

    2013-05-01

    A continuous production process was developed for coating bulk metallic glasses on the metallic wire surface. The effects of processing parameters, including the drawing velocity and coating temperature, on the coating thickness were investigated. It is found that the coating thickness increases with the increase in drawing velocity but decreases with the increase in coating temperature. A fluid mechanical model was developed to quantify the coating thickness under various processing conditions. By using this theoretical model, the coating thickness was calculated, and the calculated values are in good agreement with the experimental data.

  17. Pipeline coating comparison methods for northern pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Singh, P. [Shaw Pipe Protection, Calgary, AB (Canada); Purves, G.A. [Cimarron Engineering Ltd., Calgary, AB (Canada)

    2004-07-01

    Two high-quality pipe coatings designed for northern environments were compared for their relative costs and suitability for the conditions that will be encountered in the field. Coating selection should consider local conditions to achieve the optimum life-cycle costs for the system. Some of the key factors affecting the integrity of the protective coating on a pipe include the effects of cold temperature and soil types. In this study, both Fusion Bonded Epoxy (FBE) and High Performance Composite Coatings (HPCC) were evaluated for an entire pipeline installation in a northern environment, from the coating plant to the pipe trench. The evaluation focused on the advantages of better abrasion resistance of the HPCC coating. This was compared against the incremental cost of HPCC coating over FBE on large diameter NPS 30 to NPS 48 pipelines. The following parameters influenced the choice of coating: storage, transportation and handling; bending ability under cold weather conditions; pipe installation and backfilling; weld joint coatings; coating repair and cathodic protection and pipeline integrity. Some of the construction costs that are indirectly affected by the choice of pipe coating include right-of-way preparation and restoration; trenching; supervision, service and downtime and specialist crossings. It was concluded that HPCC has better resistance to abrasion than FBE and is more flexible in extremely cold temperatures. Standard FBE is about 10 per cent less expensive than HPCC. In general HPCC will require less coating protection than FBE, depending on site conditions. 3 refs., 18 tabs., 8 figs.

  18. Microstructure and properties of high emissivity coatings

    Institute of Scientific and Technical Information of China (English)

    Zhigang Dan; Daqiang Cang; Huimin Zhou; Hao Bai; Yanbin Zong

    2008-01-01

    A new coating on lining in industrial furnace for energy saving has been developed. Properties and microstructure of the coatings were revealed by emissivity instrument, X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM), respectively. The result indicates that the emissivity of coatings is higher than 0.90 and the thickness of coatings is about 200 μm. ZrO2, Cr2O3 and SiC in the coating benefit practical applications of coatings at high temperature with du-rable high emissivity and the continuous structure between the coatings and the substrate makes the coatings high cohesion and ex-cellent adhesion for both specimens with and without sintering at high temperature. Result fi'om laboratory experiment shows that the heating speed of specimen with coating is higher than that of controlled specimen and the temperature increases 30℃ during the heating. The average temperature drop of specimen with coatings has a 13.5% improvement in the cooling speed. The application of coatings on the checker brick in a blast furnace of 1750 m3 indicates that the coating causes the blast temperature to an average in-crease of 28℃, reduces the fluctuation of blast temperature before the blowing-in and leads to a fuel saving of 10% approximately.

  19. Applicability of coatings to control metal dusting

    NARCIS (Netherlands)

    Hermse, C.G.M.; Wortel, J.C. van

    2009-01-01

    We have performed a long term comparative study between five wrought and three centricast materials, both as-is, and in coated condition. Two commercially available coatings were applied to each different alloy. One coating was aluminum based with a chromium rich intermediate layer. The other coatin

  20. Moisture in organic coatings - a review

    NARCIS (Netherlands)

    Wel, G.K. van der; Adan, O.C.G.

    1999-01-01

    A review is given on transport and equilibrium sorption of moisture in polymer films and organic coatings. Polymeric material forms the continuous phase of a coating and is therefore important for transport properties. Besides polymer, coatings consist of pigments and fillers and various additives,

  1. Chemical vapor deposition of mullite coatings

    Science.gov (United States)

    Sarin, Vinod; Mulpuri, Rao

    1998-01-01

    This invention is directed to the creation of crystalline mullite coatings having uniform microstructure by chemical vapor deposition (CVD). The process comprises the steps of establishing a flow of reactants which will yield mullite in a CVD reactor, and depositing a crystalline coating from the reactant flow. The process will yield crystalline coatings which are dense and of uniform thickness.

  2. Latest Developments in PVD Coatings for Tooling

    Directory of Open Access Journals (Sweden)

    Gabriela Strnad

    2010-06-01

    Full Text Available The paper presents the recent developments in the field of PVD coating for manufacturing tools. A review of monoblock, multilayer, nanocomposite, DLC and oxinitride coatings is discussed, with the emphasis on coatings which enables the manufacturers to implement high productivity processes such as high speed cutting and dry speed machining.

  3. “m=1” coatings

    DEFF Research Database (Denmark)

    Cooper-Jensen, C.; Klinkby, Esben Bryndt; Beaucour, J.

    chemical hazard after manufacture is Be dust if the sample is destroyed. We have a sample of 276 nm Be coated on a Si wafer for these tests. Diamond Like Carbon (DLC) coatings with 99% sp3 bindings (meaning it is very close to diamond) are made commercially using CVD techniques. In the coating...

  4. Superhard nano-multilayers and nanocomposite coatings

    Institute of Scientific and Technical Information of China (English)

    BAI Xiaoming; ZHENG Weitao; AN Tao

    2005-01-01

    This paper reviews the recent development of nano-multilayers and nanocomposite coatings. The hardening mechanisms and design of hard coating are discussed in details. Recent research on Ti/TiN and nitride/nitride multilayer, Ti-Si-N and Ti-Al-Si-N nanocomposite coatings is described, and the perspectives of the related research are proposed.

  5. Moisture in organic coatings - a review

    NARCIS (Netherlands)

    Wel, G.K. van der; Adan, O.C.G.

    1999-01-01

    A review is given on transport and equilibrium sorption of moisture in polymer films and organic coatings. Polymeric material forms the continuous phase of a coating and is therefore important for transport properties. Besides polymer, coatings consist of pigments and fillers and various additives,

  6. Natural-oxide solar-collector coatings

    Science.gov (United States)

    Krupnick, A. C.; Roberts, M. L.; Sharpe, M. H.

    1979-01-01

    Optically selective coatings for solar collectors are produced by thermally treating stainless steel in furnace after series of cleaning and soaking operations. Coatings have withstood 18-month exposure tests at 100 percent relative humidity and temperatures of 95 F. Room temperature coatings are valuable as they are inexpensive to produce, highly production oriented, and environmentally stable.

  7. Microstructures, hardness and bioactivity of hydroxyapatite coatings

    CSIR Research Space (South Africa)

    Tlotleng, Monnamme

    2014-10-01

    Full Text Available spraying techniques are well founded. In this paper, HAP was coated on Ti–6Al–4V using direct laser melting (DLM) process. This process, unlike the traditional coating processes, is able to achieve coatings with good metallurgical bonding and little...

  8. Deposition and Investigation of Hydrophobic Coatings

    Directory of Open Access Journals (Sweden)

    Safonov Aleksey

    2015-01-01

    Full Text Available The fluoropolymer coatings of different morphologies are deposited by the HWCVD (Hot Wire CVD method. The effect of activator filament temperature on the structure of fluoropolymer coating is shown. The results of studying the hydrophobic fluoropolymer coatings with different structures, deposited by the HWCVD method, are presented.

  9. Supra-amphiphilic transparent mesoporous silica coating

    Institute of Scientific and Technical Information of China (English)

    MA Jin; YANG Zhenglong; QU Xiaozhong; YANG Zhenzhong

    2006-01-01

    Transparent mesoporous silica coatings were achieved by conventional sol-gel process. The obtained coatings display permanent supraamphiphilicity, transparent appearance and good wetting property with very fast spread rate. Incorporation of functional materials such as crystalline titania nanoparticles into the coatings was also carried out without affecting the transparency and supraamphiphilicity.

  10. Process and apparatus for producing coated particles

    NARCIS (Netherlands)

    Van Ommen, J.R.; Ellis, N.; Yurteri, C.; Marijnissen, J.C.M.

    2010-01-01

    The invention is directed to a process and apparatus for preparing coated particles, in particular a process for preparing particles that are coated with small particles using electrospraying. The coated particles produced according to the present invention find use for instance as catalysts or as

  11. Absorptive coating for aluminum solar panels

    Science.gov (United States)

    Desmet, D.; Jason, A.; Parr, A.

    1979-01-01

    Method for coating forming coating of copper oxide from copper component of sheet aluminum/copper alloy provides strong durable solar heat collector panels. Copper oxide coating has solar absorption characteristics similar to black chrome and is much simpler and less costly to produce.

  12. Moisture transport in coated plaster

    NARCIS (Netherlands)

    Goossens, E.L.J.; Van der Spoel, W.H.; Bancken, E.L.J.

    2001-01-01

    In the framework of the research project: 'Water balance of water-borne paint systems on plaster substrates in relation to fungal growth', a study is carried out to moisture transport mechanisms in coated gypsum plaster. In this contribution, the set-up of the study is described. Besides a descripti

  13. Heparin-Coated Coronary Stents.

    Science.gov (United States)

    van Der Giessen WJ; van Beusekom HM; Larsson; Serruys

    1999-09-01

    The development of the heparin-coated (HC)-stent should be viewed against the backdrop of the early unfavorable results with noncoated stents in the pre-intravascular ultrasound and pre-ticlopidine era. Notwithstanding, results of pilot and randomized trials show a surprisingly low incidence of (sub)acute stent thrombosis under challenging circumstances, such as acute coronary syndromes. Considering the quite low incidence of early complications with noncoated second-generation stents, it may require large trials to prove the clinical efficacy of the heparin- coating against noncoated devices. However, even if the "added value" of the heparin-coating will never be clinically proven, it has helped to enhance the penetration of stent therapy in interventional cardiology. Unlike the situation in 1992, very few cardiologists will now disagree with the statement that stents contribute to the state-of-the-art treatment of patients with angina pectoris or acute myocardial infarction. A preliminary comparison of available trials also suggests that the heparin-coated Palmaz-Schatz stent (Cordis Corp., Waterloo, Belgium) is as effective as the noncoated stent plus abciximab treatment.

  14. Protective coatings for commercial particulates

    DEFF Research Database (Denmark)

    Kindl, B.; Teng, Y.H.; Liu, Y.L.

    1994-01-01

    SiC/Al composites are in large-scale production with Al-Si alloy matrices. The same composites with pure Al or low Si matrices need diffusion barriers on the SiC reinforcement to control the interfacial reaction. The present paper describes various approaches taken to obtain protective coatings o...

  15. Moisture transport in coated plaster

    NARCIS (Netherlands)

    Goossens, E.L.J.; Van der Spoel, W.H.; Bancken, E.L.J.

    2001-01-01

    In the framework of the research project: 'Water balance of water-borne paint systems on plaster substrates in relation to fungal growth', a study is carried out to moisture transport mechanisms in coated gypsum plaster. In this contribution, the set-up of the study is described. Besides a descripti

  16. Mechanically reliable scales and coatings

    Energy Technology Data Exchange (ETDEWEB)

    Tortorelli, P.F.; Alexander, K.B. [Oak Ridge National Lab., TN (United States)

    1995-06-01

    In many high-temperature fossil energy systems, corrosion and deleterious environmental effects arising from reactions with reactive gases and condensible products often compromise materials performance and, as a consequence, degrade operating efficiencies. Protection of materials from such reactions is best afforded by the formation of stable surface oxides (either as deposited coatings or thermally grown scales) that are slowly reacting, continuous, dense, and adherent to the substrate. However, the ability of normally brittle ceramic films and coatings to provide such protection has long been problematical, particularly for applications involving numerous or severe high-temperature thermal cycles or very aggressive (for example, sulfidizing) environments. A satisfactory understanding of how scale and coating integrity and adherence are improved by compositional, microstructural, and processing modifications is lacking. Therefore, to address this issue, the present work is intended to define the relationships between substrate characteristics (composition, microstructure, and mechanical behavior) and the structure and protective properties of deposited oxide coatings and/or thermally grown scales. Such information is crucial to the optimization of the chemical, interfacial, and mechanical properties of the protective oxides on high-temperature materials through control of processing and composition and directly supports the development of corrosion-resistant, high-temperature materials for improved energy and environmental control systems.

  17. Polymer-coated quantum dots

    NARCIS (Netherlands)

    Tomczak, Nikodem; Liu, Rongrong; Vancso, Julius G.

    2013-01-01

    Quantum Dots (QDs) are semiconductor nanocrystals with distinct photophysical properties finding applications in biology, biosensing, and optoelectronics. Polymeric coatings of QDs are used primarily to provide long-term colloidal stability to QDs dispersed in solutions and also as a source of addit

  18. Optical trapping of coated microspheres

    NARCIS (Netherlands)

    Bormuth, V.; Jannasch, A.; Ander, M.; van Kats, C.M.; van Blaaderen, A.; Howard, J.; Schäffer, E.

    2008-01-01

    In an optical trap, micron-sized dielectric particles are held by a tightly focused laser beam. The optical force on the particle is composed of an attractive gradient force and a destabilizing scattering force. We hypothesized that using anti-reflection-coated microspheres would reduce scattering a

  19. Optical trapping of coated microspheres.

    Science.gov (United States)

    Bormuth, Volker; Jannasch, Anita; Ander, Marcel; van Kats, Carlos M; van Blaaderen, Alfons; Howard, Jonathon; Schäffer, Erik

    2008-09-01

    In an optical trap, micron-sized dielectric particles are held by a tightly focused laser beam. The optical force on the particle is composed of an attractive gradient force and a destabilizing scattering force. We hypothesized that using anti-reflection-coated microspheres would reduce scattering and lead to stronger trapping. We found that homogeneous silica and polystyrene microspheres had a sharp maximum trap stiffness at a diameter of around 800 nm--the trapping laser wavelength in water--and that a silica coating on a polystyrene microsphere was a substantial improvement for larger diameters. In addition, we noticed that homogeneous spheres of a correct size demonstrated anti-reflective properties. Our results quantitatively agreed with Mie scattering calculations and serve as a proof of principle. We used a DNA stretching experiment to confirm the large linear range in detection and force of the coated microspheres and performed a high-force motor protein assay. These measurements show that the surfaces of the coated microspheres are compatible with biophysical assays.

  20. Finite Element Analysis of Ceramic Coatings under Spherical Indentation with Metallic Interlayer: Part Ⅰ Uncracked Coatings

    Institute of Scientific and Technical Information of China (English)

    Minh-Quy LE; Seock-Sam KIM

    2006-01-01

    Spherical indentation of ceramic coatings with metallic interlayer was performed by means of axisymmetric finite element analysis (FEA). Two typical ceramic coatings with relatively high and low elastic modulus deposited on aluminum alloy and carbon steel were considered. Various combinations of indenter radius-coating thickness ratios and interlayer thickness-coating thickness ratios were used in the modeling. The effects of the interlayer, the coating and the substrate on the indentation behavior, such as the radial stress distribution along the coating surface as well as the coating interface, and the plastic deformation zone evolution in the substrate were investigated in connection with the above mentioned ratios. The coating cracking dominant modes were also discussed within the context of the peak tensile stresses on the coating surface and on the coating interface.

  1. Performance Characteristics of AOAC Method 2005.06 for the Determination of Paralytic Shellfish Toxins in Manila Clams, European Otter Clams, Grooved Carpet Shell Clams, Surf Clams, and Processed King Scallops.

    Science.gov (United States)

    O'Neill, Alison; Turner, Andrew D

    2015-01-01

    An approach was developed for the verification of method performance of the AOAC 2005.06 LC-fluorescence detector (FLD) method for determination of paralytic shellfish poisoning (PSP) toxins in bivalve shellfish. This was developed following advice published by the Analytical Laboratory Accreditation Criteria Committee and applied to shellfish species that had not been previously subjected to a full single-laboratory validation scheme. The refined approach was developed following the need to assess performance in a number of shellfish species infrequently monitored through the UK statutory monitoring program, while reducing the impact and cost of the studies, most notably in terms of the use of valuable reference standards. The species assessed were manila clams (Ruditapes philippinarum), European otter clams (Lutraria lutraria), grooved carpet shell clams (R. decussatus), surf clams (Spisula solida), and king scallops (Pecten maximus) presented as adductor only or adductor plus roe. The method was assessed for sensitivity in terms of LOD and LOQ, toxin recovery, and method precision in each species. It incorporated the PSP toxins deemed toxic and/or prevalent in UK samples and commercially available as certified reference standards. The toxins studied included GTX1-5, dcSTX, STX, C1&2, and NEO. The toxins dcGTX2&3 were included for surf clams due to the prevalence of these toxins in this species as a result of toxin decarbamoylation. Method performance targets were met for each of the characteristics investigated. Consequently, the method was deemed fit for purpose for the screening and quantification of these clam and scallop species for PSP toxins by AOAC Method 2005.06 LC-FLD.

  2. Atomically Bonded Transparent Superhydrophobic Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Aytug, Tolga [ORNL

    2015-08-01

    Maintaining clarity and avoiding the accumulation of water and dirt on optically transparent surfaces such as US military vehicle windshields, viewports, periscope optical head windows, and electronic equipment cover glasses are critical to providing a high level of visibility, improved survivability, and much-needed safety for warfighters in the field. Through a combination of physical vapor deposition techniques and the exploitation of metastable phase separation in low-alkali borosilicate, a novel technology was developed for the fabrication of optically transparent, porous nanostructured silica thin film coatings that are strongly bonded to glass platforms. The nanotextured films, initially structurally superhydrophilic, exhibit superior superhydrophobicity, hence antisoiling ability, following a simple but robust modification in surface chemistry. The surfaces yield water droplet contact angles as high as 172°. Moreover, the nanostructured nature of these coatings provides increased light scattering in the UV regime and reduced reflectivity (i.e., enhanced transmission) over a broad range of the visible spectrum. In addition to these functionalities, the coatings exhibit superior mechanical resistance to abrasion and are thermally stable to temperatures approaching 500°C. The overall process technology relies on industry standard equipment and inherently scalable manufacturing processes and demands only nontoxic, naturally abundant, and inexpensive base materials. Such coatings, applied to the optical components of current and future combat equipment and military vehicles will provide a significant strategic advantage for warfighters. The inherent self-cleaning properties of such superhydrophobic coatings will also mitigate biofouling of optical windows exposed to high-humidity conditions and can help decrease repair/replacement costs, reduce maintenance, and increase readiness by limiting equipment downtime.

  3. Environmental Effects from In-Water Hull Cleaning of Ablative Copper Antifouling Coatings

    Science.gov (United States)

    1994-07-01

    spermatozoa . Biol. Bull., 147, 236. Zeitoun, N.A., E.F. Mandelli, W.1. Mclnhenny, and R.O. Reid. 1969. Disposal of the effluents from desalination plants...S.H. Lieberman, and C. Clavell. 1978. Measurement of Cu and Zn in San Diego Bay by automated anodic stripping voltametry. Environ. Sci. Technol., 12

  4. Direct Laser Synthesis of Functional Coatings

    Energy Technology Data Exchange (ETDEWEB)

    P. Schaaf; Michelle D. Shinn; E. Carpene; J. Kaspar

    2005-06-01

    The direct laser synthesis of functional coatings employs the irradiation of materials with short intensive laser pulses in a reactive atmosphere. The material is heated and plasma is ignited in the reactive atmosphere. This leads to an intensive interaction of the material with the reactive species and a coating is directly formed on the materials surface. By that functional coatings can be easily produced a fast way on steel, aluminium, and silicon by irradiation in nitrogen, methane, or even hydrogen. The influence of the processing parameters to the properties of the functional coatings will be presented for titanium nitride coating produced on titanium with the free electron laser.

  5. TABLET COATING TECHNIQUES: CONCEPTS AND RECENT TRENDS

    OpenAIRE

    Gupta Ankit; Bilandi Ajay; Kataria Mahesh Kumar; Khatri Neetu

    2012-01-01

    Tablet coating is a common pharmaceutical technique of applying a thin polymer-based film to a tablet or a granule containing active pharmaceutical ingredients (APIs). Solid dosage forms are coated for a number of reasons, the most important of which is controlling the release profiles. The amount of coating on the surface of a tablet is critical to the effectiveness of the oral dosage form. Tablets are usually coated in horizontal rotating pans with the coating solution sprayed onto the free ...

  6. Transparent nanocrystalline diamond coatings and devices

    Energy Technology Data Exchange (ETDEWEB)

    Sumant, Anirudha V.; Khan, Adam

    2017-08-22

    A method for coating a substrate comprises producing a plasma ball using a microwave plasma source in the presence of a mixture of gases. The plasma ball has a diameter. The plasma ball is disposed at a first distance from the substrate and the substrate is maintained at a first temperature. The plasma ball is maintained at the first distance from the substrate, and a diamond coating is deposited on the substrate. The diamond coating has a thickness. Furthermore, the diamond coating has an optical transparency of greater than about 80%. The diamond coating can include nanocrystalline diamond. The microwave plasma source can have a frequency of about 915 MHz.

  7. Development of the Fully Aulomated Coating Machine

    OpenAIRE

    伊藤, 信孝; 立岩, 博之; Ito, Nobutaka; Tateiwa, Hiroyuki

    1999-01-01

    Direct sowing by use of coated rice has been gradually accpetcd in recent 20 years. Coating is the necessary key process to promote and irnprove the germination and sprouting percentage for the coated seed when sowed into the soil.In this paper,the development of the automated coating machine and its functional concept were introduced.The purpose of this studyis to automntc thc proccss of coating the chemi-cals uniformly around the rice seed and to improve the working environment under the u...

  8. Coating metals on micropowders by magnetron sputtering

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Magnetron sputtering was used to coat various metals on micropowder surfaces. By using this method, the fine particles are better dispersed and can therefore be coated more homogeneously. The micro-powders used include cenospheres from fly ash of coal-burning electric power plants (diameter 40-200 μm and particle density 0.7±0.1 g/cm3), as well as carborundum particles of different sizes. Aluminum, silver, copper, cobalt and nickel were used as the coating metals. Tests showed that the coated metal film was compact adhering tightly on the base powders, and the coated powders possess adequate flow properties.

  9. Nanostructured zirconia layers as thermal barrier coatings

    Directory of Open Access Journals (Sweden)

    Radu Robert PITICESCU

    2011-09-01

    Full Text Available The coatings obtained by thermal spray are used both as antioxidant and connection materials (e.g. MCrAlY type alloys as well as thermal barrier coatings (e.g. partially stabilized zirconia oxide with yttria oxide. This paper studies the characteristics of the coatings obtained with nanostructured powders by thermal spraying and air plasma jet metallization. Testing of coatings is done against the most disturbing factor, thermal shock. Structural changes occurring after thermal shock tests are highlighted by investigations of optical and electronic microscopy. The results obtained after quick thermal shock show a good morphological and surface behavior of the developed coatings.

  10. Nanocrystalline Ni-W coatings on copper

    Energy Technology Data Exchange (ETDEWEB)

    Panagopoulos, C.N., E-mail: chpanag@metal.ntua.gr [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece); Plainakis, G.D.; Lagaris, D.A. [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece)

    2011-04-15

    Nanocrystalline Ni-W coatings were produced on copper substrates with the aid of electrodeposition technique. The morphology, chemical composition and structure of the produced coatings were examined with the aid of scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS) and X-ray diffraction (XRD) techniques. The microhardness of alloy Ni-W coatings on copper substrate was also studied. The adhesion between the Ni-W coating, having W content 50 wt%, and the copper substrate, was also studied with a scratch testing apparatus. The scratch tests resulted in the coatings suffering an intensive brittle fracture and minor delamination.

  11. Method for making nanoporous hydrophobic coatings

    Science.gov (United States)

    Fan, Hongyou; Sun, Zaicheng

    2013-04-23

    A simple coating method is used to form nanoporous hydrophobic films that can be used as optical coatings. The method uses evaporation-induced self-assembly of materials. The coating method starts with a homogeneous solution comprising a hydrophobic polymer and a surfactant polymer in a selective solvent. The solution is coated onto a substrate. The surfactant polymer forms micelles with the hydrophobic polymer residing in the particle core when the coating is dried. The surfactant polymer can be dissolved and selectively removed from the separated phases by washing with a polar solvent to form the nanoporous hydrophobic film.

  12. Polarization Aberrations of Optical Coatings

    Science.gov (United States)

    Jota, Thiago

    This work does not limit itself to its title and touches on a number of related topics beyond it. Starting with the title, Polarization Aberrations of Optical Coatings, the immediate question that comes to mind is: what coatings? All coatings? Not all coatings, but just enough that a third person could take this information and apply it anywhere: to all coatings. The computational work-flow required to break-down the aberrations caused by polarizing events (3D vector forms of reflection and refraction) in dielectric and absorbing materials and for thick and thin films is presented. Therefore, it is completely general and of interest to the wide optics community. The example system is a Ritchey-Chretien telescope. It looks very similar to a Cassegrain, but it is not. It has hyperbolic surfaces, which allows for more optical aberration corrections. A few modern systems that use this configuration are the Hubble Space Telescope and the Keck telescopes. This particular system is a follow-up on this publication, where an example Cassegrain with aluminum coatings is characterized, and I was asked to simply evaluate it at another wavelength. To my surprise, I found a number of issues which lead me to write a completely new, one-of-its-kind 3D polarization ray-tracing code. It can do purely geometrical ray-tracing with add-on the polarization analysis capability, and more importantly: it keeps your data at your fingertips while offering all the outstanding facilities of Mathematica. The ray-tracing code and its extensive library, which can do several advanced computations, is documented in the appendix. The coatings of the Ritchey-Chretien induce a number of aberrations, primarily, but not limited to: tilt, defocus, astigmatism, and coma. I found those forms to exist in both aluminum and with a reflectance-enhancing dielectric quarter-wave multilayer coating over aluminum. The thickness of the film stack varies as function of position to present a quarter-wave of optical

  13. Black Molecular Adsorber Coatings for Spaceflight Applications

    Science.gov (United States)

    Abraham, Nithin Susan; Hasegawa, Mark Makoto; Straka, Sharon A.

    2014-01-01

    The molecular adsorber coating is a new technology that was developed to mitigate the risk of on-orbit molecular contamination on spaceflight missions. The application of this coating would be ideal near highly sensitive, interior surfaces and instruments that are negatively impacted by outgassed molecules from materials, such as plastics, adhesives, lubricants, epoxies, and other similar compounds. This current, sprayable paint technology is comprised of inorganic white materials made from highly porous zeolite. In addition to good adhesion performance, thermal stability, and adsorptive capability, the molecular adsorber coating offers favorable thermal control characteristics. However, low reflectivity properties, which are typically offered by black thermal control coatings, are desired for some spaceflight applications. For example, black coatings are used on interior surfaces, in particular, on instrument baffles for optical stray light control. Similarly, they are also used within light paths between optical systems, such as telescopes, to absorb light. Recent efforts have been made to transform the white molecular adsorber coating into a black coating with similar adsorptive properties. This result is achieved by optimizing the current formulation with black pigments, while still maintaining its adsorption capability for outgassing control. Different binder to pigment ratios, coating thicknesses, and spray application techniques were explored to develop a black version of the molecular adsorber coating. During the development process, coating performance and adsorption characteristics were studied. The preliminary work performed on black molecular adsorber coatings thus far is very promising. Continued development and testing is necessary for its use on future contamination sensitive spaceflight missions.

  14. A Multifunctional Coating for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Jolley, Scott t.

    2011-01-01

    Nearly all metals and their alloys are subject to corrosion that causes them to lose their structural integrity or other critical functionality. Protective coatings are the most commonly used method of corrosion control. However, progressively stricter environmental regulations have resulted in the ban of many commercially available corrosion protective coatings due to the harmful effects of their solvents or corrosion inhibitors. This work concerns the development of a multifunctional smart coating for the autonomous control of corrosion. This coating is being developed to have the inherent ability to detect the chemical changes associated with the onset of corrosion and respond autonomously to indicate it and control it. The multi-functionality of the coating is based on microencapsulation technology specifically designed for corrosion control applications. This design has, in addition to all the advantages of existing microcapsulation designs, the corrosion controlled release function that triggers the delivery of corrosion indicators and inhibitors on demand, only when and where needed. Microencapsulation of self-healing agents for autonomous repair of mechanical damage to the coating is also being pursued. Corrosion indicators, corrosion inhibitors, as well as self-healing agents, have been encapsulated and dispersed into several paint systems to test the corrosion detection, inhibition, and self-healing properties of the coating. Key words: Corrosion, coating, autonomous corrosion control, corrosion indication, corrosion inhibition, self-healing coating, smart coating, multifunctional coating, microencapsulation.

  15. Silane based coating of aluminium mold

    DEFF Research Database (Denmark)

    2013-01-01

    comprising a chemically bonded monolayer of silane compounds on the at least one surface wherein the silane is a halogenated silane. The at least one surface coated with the anti-stiction coating may be configured to withstand an injection molding process at a pressure above 100 MPa. Furthermore, a mold......A method of preparing an aluminum mold for injection molding is provided, the method comprises the steps of providing an aluminum mold having a least one surface, subjecting the at least one surface to a gas or liquid phase silane to thereby form an anti-stiction coating, the anti-stiction coating...... having at least one closed cavity is provided, at least one surface of the at least one cavity being an aluminium surface coated with a silane based coating layer. The silane based anti-stiction coating improves the anti-stiction properties of the mold which may allow for molding and demolding...

  16. Methods and apparatus for coating particulate material

    Science.gov (United States)

    Littman, Howard (Inventor); Plawsky, Joel L. (Inventor); Paccione, John D. (Inventor)

    2012-01-01

    Methods and apparatus for coating particulate material are provided. The apparatus includes a vessel having a top and a bottom, a vertically extending conduit having an inlet in the vessel and an outlet outside of the vessel, a first fluid inlet in the bottom of the vessel for introducing a transfer fluid, a second fluid inlet in the bottom of the vessel for introducing a coating fluid, and a fluid outlet from the vessel. The method includes steps of agitating a material, contacting the material with a coating material, and drying the coating material to produce a coated material. The invention may be adapted to coat aerogel beads, among other materials. A coated aerogel bead and an aerogel-based insulation material are also disclosed.

  17. Status of NEG Coating at ESRF

    CERN Document Server

    Hahn, Michael

    2005-01-01

    The ESRF non-evaporable getter (NEG) coating facility is in operation since two years now. A large part of the insertion device straight sections of the electron storage ring has been equipped with in-house coated 5m long aluminum vacuum chambers with an inner vertical aperture of 8 mm. Operational experience with different coating parameters leading to different film thicknesses will be given and compared to bremsstrahlung data. The paper deals also with improvements of the coating production and chamber preparation, and describes some aspects of NEG coating data acquisition, visualization, and remote control. The R&D program leading to a more powerful DC solenoidal coating tool to further improve the NEG coating production throughput and quality aspects is also discussed.

  18. Properties of Plasma and HVOF Sprayed Coatings

    Directory of Open Access Journals (Sweden)

    Wojciech Żórawski

    2012-11-01

    Full Text Available The work compares the properties of plasma and HVOF thermally sprayed coatings obtained by blending the NiCrBSi and Fe2O3 powders. The deposition was performed by means of the Plancer PN-120 and the Diamond Jet guns for plasma spraying and HVOF spraying respectively. The SEM (EDS method was employed to study the microstructure of the produced coatings. Although the blended powders differ in particle size, shape, and distribution, it is possible to obtain composite coatings with an NiCrBSi matrix containing iron oxides. Except for a different microstructure, plasma and HVOF coatings have a different phase composition, which was examined using the Bruker D-8 Advance diffractometer. Studies of the coatings wear and scuffing resistance showed that an optimal content of Fe2O3 is about 26 % for plasma sprayed coatings and 22.5 % for HVOF deposited coatings.

  19. ANTIREFLECTION MULTILAYER COATINGS WITH THIN METAL LAYERS

    Directory of Open Access Journals (Sweden)

    L. A. Gubanova

    2016-03-01

    Full Text Available The design of anti-reflective coatings for metal surfaces of Al, Ti, N,i Cr is proposed. The coatings have the form of alternating layers of dielectric/metal/dielectric with the number of cells up to15. The method of calculation of such coatings is proposed. We have calculated the coatings of the type [HfO2/Cr/HfO2]15, [ZrO2/Ti/Al2O3]15, [ZrO2/Cr/ZrO2]15. It is shown that the proposed interference coatings provide reduction of the residual reflectance of the metal several times (from 3.5 to 6.0 in a wide spectral range (300-1000 nm. The proposed coatings can be recommended as anti-reflective coatings for energy saving solar systems and batteries, and photovoltaic cells.

  20. Thermal Residual Stresses in Multilayered Coatings

    Institute of Scientific and Technical Information of China (English)

    Xiancheng ZHANG; Binshi XU; Haidou WANG; Yixiong WU

    2005-01-01

    The mechanical integrity and reliability of coated devices are strongly affected by the residual stresses in thin films and coatings. However, due to the metallurgical complexity of materials, it is rather difficult to obtain a closed-form solution of residual stresses within multilayered coatings (e.g. functionally graded coatings, FGCs). In this paper,an analytical model is developed to predict the distribution of residual stresses within multilayered coatings. The advantage of this model is that the solution of residual stresses is independent of the number of layers. Specific results are obtained by calculating elastic thermal stresses in ZrO2/NiCoCrAIY FGCs, which consist of different material layers. Furthermore, the residual stress distribution near the edges and the stress-induced failure modes of coating are also analyzed. The topics discussed provide some insights into the development of a methodology for designing fail-safe coating systems.

  1. Nanostructured thin films and coatings mechanical properties

    CERN Document Server

    2010-01-01

    The first volume in "The Handbook of Nanostructured Thin Films and Coatings" set, this book concentrates on the mechanical properties, such as hardness, toughness, and adhesion, of thin films and coatings. It discusses processing, properties, and performance and provides a detailed analysis of theories and size effects. The book presents the fundamentals of hard and superhard nanocomposites and heterostructures, assesses fracture toughness and interfacial adhesion strength of thin films and hard nanocomposite coatings, and covers the processing and mechanical properties of hybrid sol-gel-derived nanocomposite coatings. It also uses nanomechanics to optimize coatings for cutting tools and explores various other coatings, such as diamond, metal-containing amorphous carbon nanostructured, and transition metal nitride-based nanolayered multilayer coatings.

  2. High efficiency turbine blade coatings.

    Energy Technology Data Exchange (ETDEWEB)

    Youchison, Dennis L.; Gallis, Michail A.

    2014-06-01

    The development of advanced thermal barrier coatings (TBCs) of yttria stabilized zirconia (YSZ) that exhibit lower thermal conductivity through better control of electron beam - physical vapor deposition (EB-PVD) processing is of prime interest to both the aerospace and power industries. This report summarizes the work performed under a two-year Lab-Directed Research and Development (LDRD) project (38664) to produce lower thermal conductivity, graded-layer thermal barrier coatings for turbine blades in an effort to increase the efficiency of high temperature gas turbines. This project was sponsored by the Nuclear Fuel Cycle Investment Area. Therefore, particular importance was given to the processing of the large blades required for industrial gas turbines proposed for use in the Brayton cycle of nuclear plants powered by high temperature gas-cooled reactors (HTGRs). During this modest (~1 full-time equivalent (FTE)) project, the processing technology was developed to create graded TBCs by coupling ion beam-assisted deposition (IBAD) with substrate pivoting in the alumina-YSZ system. The Electron Beam - 1200 kW (EB-1200) PVD system was used to deposit a variety of TBC coatings with micron layered microstructures and reduced thermal conductivity below 1.5 W/m.K. The use of IBAD produced fully stoichiometric coatings at a reduced substrate temperature of 600 oC and a reduced oxygen background pressure of 0.1 Pa. IBAD was also used to successfully demonstrate the transitioning of amorphous PVD-deposited alumina to the -phase alumina required as an oxygen diffusion barrier and for good adhesion to the substrate Ni2Al3 bondcoat. This process replaces the time consuming thermally grown oxide formation required before the YSZ deposition. In addition to the process technology, Direct Simulation Monte Carlo plume modeling and spectroscopic characterization of the PVD plumes were performed. The project consisted of five tasks. These included the production of layered

  3. High efficiency turbine blade coatings

    Energy Technology Data Exchange (ETDEWEB)

    Youchison, Dennis L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gallis, Michail A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    The development of advanced thermal barrier coatings (TBCs) of yttria stabilized zirconia (YSZ) that exhibit lower thermal conductivity through better control of electron beam - physical vapor deposition (EB-PVD) processing is of prime interest to both the aerospace and power industries. This report summarizes the work performed under a two-year Lab-Directed Research and Development (LDRD) project (38664) to produce lower thermal conductivity, graded-layer thermal barrier coatings for turbine blades in an effort to increase the efficiency of high temperature gas turbines. This project was sponsored by the Nuclear Fuel Cycle Investment Area. Therefore, particular importance was given to the processing of the large blades required for industrial gas turbines proposed for use in the Brayton cycle of nuclear plants powered by high temperature gas-cooled reactors (HTGRs). During this modest (~1 full-time equivalent (FTE)) project, the processing technology was developed to create graded TBCs by coupling ion beam-assisted deposition (IBAD) with substrate pivoting in the alumina-YSZ system. The Electron Beam - 1200 kW (EB-1200) PVD system was used to deposit a variety of TBC coatings with micron layered microstructures and reduced thermal conductivity below 1.5 W/m.K. The use of IBAD produced fully stoichiometric coatings at a reduced substrate temperature of 600°C and a reduced oxygen background pressure of 0.1 Pa. IBAD was also used to successfully demonstrate the transitioning of amorphous PVD-deposited alumina to the -phase alumina required as an oxygen diffusion barrier and for good adhesion to the substrate Ni2Al3 bondcoat. This process replaces the time consuming thermally grown oxide formation required before the YSZ deposition. In addition to the process technology, Direct Simulation Monte Carlo plume modeling and spectroscopic characterization of the PVD plumes were performed. The project consisted of five tasks. These included the

  4. Wrinkling of solidifying polymeric coatings

    Science.gov (United States)

    Basu, Soumendra Kumar

    2005-07-01

    In coatings, wrinkles are viewed as defects or as desired features for low gloss, and texture. In either case, discovering the origin of wrinkles and the conditions that lead to their formation is important. This research examines what wrinkling requires and proposes a mechanism to explain the observations. All curing wrinkling coatings contain multi-functional reactants. Upon curing, all develop a depth-wise gradient in solidification that result in a cross-linked elastic skin atop a viscous bottom layer. It is hypothesized that compressive stress develops in the skin when liquid below diffuses up into the skin. High enough compressive stress buckles the skin to produce wrinkles. The hypothesis is substantiated by experimental and theoretical evidences. Effects of various application and compositional parameters on wrinkle size in a liquid-applied acrylic coating and a powder-applied epoxy coating were examined. All three components, namely resin, cross-linker and catalyst blocked with at least equimolar volatile blocker, proved to be required for wrinkling. The wrinkling phenomenon was modeled with a theory that accounts for gradient generation, cross-linking reaction and skinning; predictions compared well with observations. Two-layer non-curing coatings that have a stiff elastic layer atop a complaint elastic bottom layer wrinkled when the top layer is compressed. The top layer was compressed by either moisture absorption or differential thermal expansion. Experimental observations compared well with predictions from a theory based on force balance in multilayer systems subjected to differential contraction or expansion. A model based on the Flory-Rehner free energy of a constrained cross-linked gel was constructed that predicts the compressive stress generated in a coating when it absorbs solvent. Linear stability analysis predicts that when a compressed elastic layer is attached atop a viscous layer, it is always unstable to buckles whose wavelength exceeds a

  5. Residual Stresses Modeled in Thermal Barrier Coatings

    Science.gov (United States)

    Freborg, A. M.; Ferguson, B. L.; Petrus, G. J.; Brindley, W. J.

    1998-01-01

    Thermal barrier coating (TBC) applications continue to increase as the need for greater engine efficiency in aircraft and land-based gas turbines increases. However, durability and reliability issues limit the benefits that can be derived from TBC's. A thorough understanding of the mechanisms that cause TBC failure is a key to increasing, as well as predicting, TBC durability. Oxidation of the bond coat has been repeatedly identified as one of the major factors affecting the durability of the ceramic top coat during service. However, the mechanisms by which oxidation facilitates TBC failure are poorly understood and require further characterization. In addition, researchers have suspected that other bond coat and top coat factors might influence TBC thermal fatigue life, both separately and through interactions with the mechanism of oxidation. These other factors include the bond coat coefficient of thermal expansion, the bond coat roughness, and the creep behavior of both the ceramic and bond coat layers. Although it is difficult to design an experiment to examine these factors unambiguously, it is possible to design a computer modeling "experiment" to examine the action and interaction of these factors, as well as to determine failure drivers for TBC's. Previous computer models have examined some of these factors separately to determine their effect on coating residual stresses, but none have examined all the factors concurrently. The purpose of this research, which was performed at DCT, Inc., in contract with the NASA Lewis Research Center, was to develop an inclusive finite element model to characterize the effects of oxidation on the residual stresses within the TBC system during thermal cycling as well as to examine the interaction of oxidation with the other factors affecting TBC life. The plasma sprayed, two-layer thermal barrier coating that was modeled incorporated a superalloy substrate, a NiCrAlY bond coat, and a ZrO2-8 wt % Y2O3 ceramic top coat. We

  6. Method of Producing Controlled Thermal Expansion Coat for Thermal Barrier Coatings

    Science.gov (United States)

    Brindley, William J. (Inventor); Miller, Robert A. (Inventor); Aikin, Beverly J. M. (Inventor)

    2000-01-01

    An improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coatings includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer or a diameter of less than 5 micron. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention the first bond coat layer is applied to the substrate. and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of the invention a ceramic insulating layer covers the second bond coat layer.

  7. Coating Technologies for Insensitive Munitions

    Science.gov (United States)

    2006-09-01

    GM 9540P is an accelerated cyclic corrosion test that was developed by the automotive industry to more accurately replicate long-term outdoor...Impact resistance can be described as a paint property that 23 quantitatively characterizes the adhesion and flexibility of a coating with...will be tested as previous panels. 1. Polyurea over Pitt-Char XP, 2. Pitt-Char XP over Multiprime 97-680 primer, with Pitthane urethane TC, 3

  8. Multilayer coating for high gradients

    CERN Document Server

    Kubo, Takayuki

    2016-01-01

    The multilayer coating for high gradients is reviewed. Not only the S-I-S structure, but also the S-S bilayer structure are also treated. This is an incomplete manuscript of an invited article which will be submitted to a journal. I have uploaded this version in order to help the understanding on my talk at the TESLA Technology Collaboration meeting at Saclay, France.

  9. Beryllium coating on Inconel tiles

    Energy Technology Data Exchange (ETDEWEB)

    Bailescu, V.; Burcea, G.; Lungu, C.P.; Mustata, I.; Lungu, A.M. [Association EURATOM-MEC Romania, National Institute of Laser, Plasma and Radiation Physics, Bucharest (Romania); Rubel, M. [Alfven Laboratory, Royal Institute of Technology, Stockholm (Sweden); Coad, J.P. [Culham Science Centre, EURATOM-UKAEA Fusion Association, Abingdon, OX, Oxon (United Kingdom); Matthews, G.; Pedrick, L.; Handley, R. [UKAEA Fusion, Association Euratom-UKAEA, Culham Science and Engineering Centre, OX 3DB ABINGDON, Oxon (United Kingdom)

    2007-07-01

    Full text of publication follows: The Joint European Torus (JET) is a large experimental nuclear fusion device. Its aim is to confine and study the behaviour of plasma in conditions and dimensions approaching those required for a fusion reactor. The plasma is created in the toroidal shaped vacuum vessel of the machine in which it is confined by magnetic fields. In preparation for ITER a new ITER-like Wall (ILW) will be installed on Joint European Torus (JET), a wall not having any carbon facing the plasma [1]. In places Inconel tiles are to be installed, these tiles shall be coated with Beryllium. MEdC represented by the National Institute for Laser, Plasma and Radiation Physics, Magurele, Bucharest and in direct cooperation with Nuclear Fuel Plant Pitesti started to coat Inconel tiles with 8 {mu}m of Beryllium in accordance with the requirements of technical specification and fit for installation in the JET machine. This contribution provides an overview of the principles of manufacturing processes using thermal evaporation method in vacuum and the properties of the prepared coatings. The optimization of the manufacturing process (layer thickness, structure and purity) has been carried out on Inconel substrates (polished and sand blasted) The results of the optimization process and analysis (SEM, TEM, XRD, Auger, RBS, AFM) of the coatings will be presented. Reference [1] Takeshi Hirai, H. Maier, M. Rubel, Ph. Mertens, R. Neu, O. Neubauer, E. Gauthier, J. Likonen, C. Lungu, G. Maddaluno, G. F. Matthews, R. Mitteau, G. Piazza, V. Philipps, B. Riccardi, C. Ruset, I. Uytdenhouwen, R and D on full tungsten divertor and beryllium wall for JET TIER-like Wall Project, 24. Symposium on Fusion Technology - 11-15 September 2006 -Warsaw, Poland. (authors)

  10. Low Temperature Cure Powder Coatings

    Science.gov (United States)

    2013-05-01

    Space Administration USN = United States Navy Test coupons were comprised of steel, aluminum, and magnesium alloys commonly utilized within...utilized a film gauge that was capable of handling both ferrous and non- ferrous metallic substrates for all film thickness measurements. 5.2.1.4 Surface...copper content aluminum alloys while the 2024-T3 specimens passed. From a comparative standpoint, the LTCPC-coated Al coupons for each group

  11. Standardization in optical coating characterisation

    Institute of Scientific and Technical Information of China (English)

    D.Ristau

    2005-01-01

    In the rapid development course of laser technology and modern optics, optical metrology continuously gains importance for the quality management in the industrial production environment and also for research in optical coatings. Besides absorption and scatter losses, the spectral characteristics and laser induced damage thresholds are considered as common quality factors for coated optical components and often define the optimization targets for new products and applications. Also, these quality parameters are the basis for the comparison of commercial optics and can be found in the product catalogues of most manufacturers of optical components. As a consequence, standardization of characterisation procedures for these fundamental properties evolved to a crucial point for the optics industry. During the last decade, adapted standard measurement techniques have been elaborated and discussed by representatives from many industrial companies and research institutes within working groups of the International Organisation for Standardization (ISO). In this contribution, the current state of standardized characterisation techniques for optical coatings is summarised. Selected standards for the measurement of absorption (ISO 11551), scattering (ISO 13696) and laser induced damage thresholds (ISO 11254, Parts 1 and 2) will be described and discussed in view of their applicability and reproducibility. The report will be concluded by an outlook on the current projects and future tasks of standardization in optics characterisation.

  12. Measurement of surface crystallinity of PAA and PAANa coatings and its effect on hydrophilicity of coatings

    Institute of Scientific and Technical Information of China (English)

    潘春跃; 刘清泉; 徐先华; 陈振华

    2003-01-01

    The solutions of poly(acrylic acid)(PAA), poly(acrylic acid sodium)(PAANa) were coated on aluminium fins by roll coating method. The coatings with different crystallinity were obtained by varying baking time and temperature. Their surface crystallinity and surface tension were measured, and their spreading speed constant and equilibrium contact angle were tested also. The correlation of surface crystallinity, surface tension, spreading speed constant and surface hydrophilicity was discussed. It is demonstrated that surface tension and spreading speed constant increase, while equilibrium contact angle declines with increasing surface crystallinity of coatings, that is to say, the hydrophilicity of coatings is improved with surface crystallinity of coatings increasing.

  13. A New Method to Prepare Hydroxylapatite Coating of Implants

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A new method ( sintering method) to prepare hydroxylapatite coating of implants was developed. The coating was characterized by X- ray diffraction (XRD) and infrared spectroscopy with a Nicolet FTIR aparatus. The adhesion strength of coating to metal substrate were measured. The bone ingrowth of coated substrate was observed and clinical application of coated implants were reported in this paper. The comparison results of sintered coating and plasma sparied coating was discussed.

  14. Brush seal shaft wear resistant coatings

    Science.gov (United States)

    Howe, Harold

    1995-03-01

    Brush seals suffer from high wear, which reduces their effectiveness. This work sought to reduce brush seal wear by identifying and testing several industry standard coatings. One of the coatings was developed for this work. It was a co-sprayed PSZ with boron-nitride added for a high temperature dry lubricant. Other coatings tested were a PSZ, chrome carbide and a bare rotor. Testing of these coatings included thermal shocking, tensile testing and wear/coefficient of friction testing. Wear testing consisted of applying a coating to a rotor and then running a sample tuft of SiC ceramic fiber against the coating. Surface speeds at point of contact were slightly over 1000 ft/sec. Rotor wear was noted, as well as coefficient of friction data. Results from the testing indicates that the oxide ceramic coatings cannot withstand the given set of conditions. Carbide coatings will not work because of the need for a metallic binder, which oxidizes in the high heat produced by friction. All work indicated a need for a coating that has a lubricant contained within itself and the coating must be resistant to an oxidizing environment.

  15. Incorporation of proteins into biomimetic hydroxyapatite coatings

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.; Groot, K. de [Leiden Univ. (Netherlands). Biomaterials Research Group; IsoTis, Bilthoven (Netherlands); Layrolle, P. [IsoTis, Bilthoven (Netherlands); Blitterswijk, C.A. van [IsoTis, Bilthoven (Netherlands); Twente Univ., Enschede (Netherlands)

    2001-07-01

    Hydroxyapatite coating was biomimetically deposited on titanium alloy (Ti6Al4V). Various concentrations (10 ng/ml - 1 {mu}g/ml) of bovine serum albumin (BSA) were added into a supersaturated calcium phosphate solution (CPS) at physiological temperature and pH of 7.4. Pre-treated Ti6Al4V plates were immersed into such solution for 48 hours at 37 C. BSA was co-precipitated with the crystals during the coating process. A white and thick (30 - 50 {mu}m) coating was uniformly deposited on titanium surfaces. The produced coatings were evaluated and protein release was measured. Results revealed: at higher BSA concentrations in the solution, the coating changed its microstructure; the crystal size of the coating and the coating thickness decreased indicating a crystal growth inhibition. Loading amounts of protein in the coating increased with higher concentration in the solution. Protein was incorporated into whole layer of coating and lead to a slow release. These results indicated that biomimetic hydroxyapatite coatings are suitable carriers for proteins. (orig.)

  16. Effects of Bond Coating on NiCrBSi-Mo Composite Functional Coating Properties in Plasma Spraying NiCrBSi-Mo/Ni Coating

    Directory of Open Access Journals (Sweden)

    DU Ji-yu

    2017-09-01

    Full Text Available Nickel-based bond coating and composite functional coating were sprayed on leaf blade steel material FV520B successively by using air plasma spraying system. NiCrBSi-Mo powder deposition rate, coating porosity, bonding strength and surface hardness were tested. The results indicate that, for the NiCrBSi-Mo/Ni coating, bond coating with 180-220μm thickness can improve NiCrBSi-Mo powder deposition rate while the surface coating with lower porosity, higher bonding strength and high hardness is prepared; the increase of bond coating thickness can lead to increase of functional coating porosity in the bottom and speed up the process of porosity attenuating in the vertical direction.SEM analysis found that the increase of bond coating thickness results in the droplet deposition morphology change in the bending interface with the functional coating. The defects of bond coating have genetic influence on composite functional coating. Bond tensile test results show that excessive bond coating thickness will cause fracture in the interface between bond coating and functional coating during the stretching process; in different grinding surfaces, Vickers hardness of test blocks with a certain bood coating thickness attenuates slowly in the vertical direction. NiCrBSi-Mo/Ni coating not only maintains high surface hardness, but also increases the coating thickness to repair surface damage.

  17. Development on Laser Cladding Ceramic Coating

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The latest progress and research status of laser cladding ceramic coating was summarized. Technique characteristics and influence factors of laser cladding technique were introduced. Laser cladding technique includes the mixing method and laser irradiation. The mixing method can be classified as pre-coating method and synchronization method. The technique parameters include size of facula, scanning speed, cladding sector and times, adding quantity of powder, thickness of coating and quantity of joint coating. The results show that proper technique parameters can be controlled in order to acquire high quality laser cladding coating. Strengthened effect mechanism of rare earth additive is concluded, and the main effects of rare earth additive are micro-alloying, purifying boundary, fining crystal grains, improving crystal boundary, restraining columnar crystal growing. The development of laser cladding ceramic coating research was discussed.

  18. Microneedle Coating Techniques for Transdermal Drug Delivery.

    Science.gov (United States)

    Haj-Ahmad, Rita; Khan, Hashim; Arshad, Muhammad Sohail; Rasekh, Manoochehr; Hussain, Amjad; Walsh, Susannah; Li, Xiang; Chang, Ming-Wei; Ahmad, Zeeshan

    2015-11-05

    Drug administration via the transdermal route is an evolving field that provides an alternative to oral and parenteral routes of therapy. Several microneedle (MN) based approaches have been developed. Among these, coated MNs (typically where drug is deposited on MN tips) are a minimally invasive method to deliver drugs and vaccines through the skin. In this review, we describe several processes to coat MNs. These include dip coating, gas jet drying, spray coating, electrohydrodynamic atomisation (EHDA) based processes and piezoelectric inkjet printing. Examples of process mechanisms, conditions and tested formulations are provided. As these processes are independent techniques, modifications to facilitate MN coatings are elucidated. In summary, the outcomes and potential value for each technique provides opportunities to overcome formulation or dosage form limitations. While there are significant developments in solid degradable MNs, coated MNs (through the various techniques described) have potential to be utilized in personalized drug delivery via controlled deposition onto MN templates.

  19. Crystallization of DNA-coated colloids.

    Science.gov (United States)

    Wang, Yu; Wang, Yufeng; Zheng, Xiaolong; Ducrot, Étienne; Yodh, Jeremy S; Weck, Marcus; Pine, David J

    2015-06-16

    DNA-coated colloids hold great promise for self-assembly of programmed heterogeneous microstructures, provided they not only bind when cooled below their melting temperature, but also rearrange so that aggregated particles can anneal into the structure that minimizes the free energy. Unfortunately, DNA-coated colloids generally collide and stick forming kinetically arrested random aggregates when the thickness of the DNA coating is much smaller than the particles. Here we report DNA-coated colloids that can rearrange and anneal, thus enabling the growth of large colloidal crystals from a wide range of micrometre-sized DNA-coated colloids for the first time. The kinetics of aggregation, crystallization and defect formation are followed in real time. The crystallization rate exhibits the familiar maximum for intermediate temperature quenches observed in metallic alloys, but over a temperature range smaller by two orders of magnitude, owing to the highly temperature-sensitive diffusion between aggregated DNA-coated colloids.

  20. Smart self-repairing protective coatings

    Directory of Open Access Journals (Sweden)

    Daria V. Andreeva

    2008-10-01

    Full Text Available Nanocontainers with a shell possessing controlled release properties can be used to fabricate a new family of active coatings that can respond quickly to changes in the coating environment or the coating's integrity. The release of corrosion inhibitors encapsulated within nanocontainers is triggered by the corrosion process, which prevents the spontaneous leakage of the corrosion inhibitor out of the coating. Moreover, if different types of nanocontainers loaded with the corresponding active agents are incorporated simultaneously into a coating matrix, the coating can act in several different ways (e.g. antibacterial, anticorrosion and antistatic. This review presents methods for the fabrication of such nanocontainers, how they can encapsulate active material, and their permeability properties.