WorldWideScience

Sample records for support system cdss

  1. Precision diagnosis: a view of the clinical decision support systems (CDSS) landscape through the lens of critical care.

    Science.gov (United States)

    Belard, Arnaud; Buchman, Timothy; Forsberg, Jonathan; Potter, Benjamin K; Dente, Christopher J; Kirk, Allan; Elster, Eric

    2017-04-01

    Improving diagnosis and treatment depends on clinical monitoring and computing. Clinical decision support systems (CDSS) have been in existence for over 50 years. While the literature points to positive impacts on quality and patient safety, outcomes, and the avoidance of medical errors, technical and regulatory challenges continue to retard their rate of integration into clinical care processes and thus delay the refinement of diagnoses towards personalized care. We conducted a systematic review of pertinent articles in the MEDLINE, US Department of Health and Human Services, Agency for Health Research and Quality, and US Food and Drug Administration databases, using a Boolean approach to combine terms germane to the discussion (clinical decision support, tools, systems, critical care, trauma, outcome, cost savings, NSQIP, APACHE, SOFA, ICU, and diagnostics). References were selected on the basis of both temporal and thematic relevance, and subsequently aggregated around four distinct themes: the uses of CDSS in the critical and surgical care settings, clinical insertion challenges, utilization leading to cost-savings, and regulatory concerns. Precision diagnosis is the accurate and timely explanation of each patient's health problem and further requires communication of that explanation to patients and surrogate decision-makers. Both accuracy and timeliness are essential to critical care, yet computed decision support systems (CDSS) are scarce. The limitation arises from the technical complexity associated with integrating and filtering large data sets from diverse sources. Provider mistrust and resistance coupled with the absence of clear guidance from regulatory bodies further retard acceptance of CDSS. While challenges to develop and deploy CDSS are substantial, the clinical, quality, and economic impacts warrant the effort, especially in disciplines requiring complex decision-making, such as critical and surgical care. Improving diagnosis in health care

  2. Knowledge bases, clinical decision support systems, and rapid learning in oncology.

    Science.gov (United States)

    Yu, Peter Paul

    2015-03-01

    One of the most important benefits of health information technology is to assist the cognitive process of the human mind in the face of vast amounts of health data, limited time for decision making, and the complexity of the patient with cancer. Clinical decision support tools are frequently cited as a technologic solution to this problem, but to date useful clinical decision support systems (CDSS) have been limited in utility and implementation. This article describes three unique sources of health data that underlie fundamentally different types of knowledge bases which feed into CDSS. CDSS themselves comprise a variety of models which are discussed. The relationship of knowledge bases and CDSS to rapid learning health systems design is critical as CDSS are essential drivers of rapid learning in clinical care. Copyright © 2015 by American Society of Clinical Oncology.

  3. Development of EBM-CDSS (Evidence-Based Clinical Decision Support System) to AIG Prognostication in Terminally Ill Patients

    Science.gov (United States)

    2016-03-01

    indicates that, when making their choices, the people tend to be regret averse: they anticipate regret to avoid post-decisional regret . In the...visual analogue scales for elicitation of regret , elicitation of acceptable regret , incorporation of treatment effects in the decision making...calculations. The details of the CDSS-EBM are published in a peer-reviewed journal manuscript (See appendix: Extensions to Regret -based Decision Curve Analysis

  4. Customer Decision Support Systems: Resources for Student Decision Making

    Directory of Open Access Journals (Sweden)

    Cara Okleshen Peters, Ph.D.

    2005-07-01

    Full Text Available This paper highlights the potential of customer decision support systems (CDSS to assist students in education-related decision making. Faculty can use these resources to more effectively advise students on various elements of college life, while students can employ them to more actively participate in their own learning and improve their academic experience. This conceptual paper summarizes consumer decision support systems (CDSS concepts and presents exemplar websites students could utilize to support their education-related decision making. Finally, the authors discuss the potential benefits and drawbacks such resources engender from a student perspective and conclude with directions for future research.

  5. Reasons For Physicians Not Adopting Clinical Decision Support Systems: Critical Analysis.

    Science.gov (United States)

    Khairat, Saif; Marc, David; Crosby, William; Al Sanousi, Ali

    2018-04-18

    Clinical decision support systems (CDSSs) are an integral component of today's health information technologies. They assist with interpretation, diagnosis, and treatment. A CDSS can be embedded throughout the patient safety continuum providing reminders, recommendations, and alerts to health care providers. Although CDSSs have been shown to reduce medical errors and improve patient outcomes, they have fallen short of their full potential. User acceptance has been identified as one of the potential reasons for this shortfall. The purpose of this paper was to conduct a critical review and task analysis of CDSS research and to develop a new framework for CDSS design in order to achieve user acceptance. A critical review of CDSS papers was conducted with a focus on user acceptance. To gain a greater understanding of the problems associated with CDSS acceptance, we conducted a task analysis to identify and describe the goals, user input, system output, knowledge requirements, and constraints from two different perspectives: the machine (ie, the CDSS engine) and the user (ie, the physician). Favorability of CDSSs was based on user acceptance of clinical guidelines, reminders, alerts, and diagnostic suggestions. We propose two models: (1) the user acceptance and system adaptation design model, which includes optimizing CDSS design based on user needs/expectations, and (2) the input-process-output-engagemodel, which reveals to users the processes that govern CDSS outputs. This research demonstrates that the incorporation of the proposed models will improve user acceptance to support the beneficial effects of CDSSs adoption. Ultimately, if a user does not accept technology, this not only poses a threat to the use of the technology but can also pose a threat to the health and well-being of patients. ©Saif Khairat, David Marc, William Crosby, Ali Al Sanousi. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 18.04.2018.

  6. A health record integrated clinical decision support system to support prescriptions of pharmaceutical drugs in patients with reduced renal function: design, development and proof of concept.

    Science.gov (United States)

    Shemeikka, Tero; Bastholm-Rahmner, Pia; Elinder, Carl-Gustaf; Vég, Anikó; Törnqvist, Elisabeth; Cornelius, Birgitta; Korkmaz, Seher

    2015-06-01

    To develop and verify proof of concept for a clinical decision support system (CDSS) to support prescriptions of pharmaceutical drugs in patients with reduced renal function, integrated in an electronic health record system (EHR) used in both hospitals and primary care. A pilot study in one geriatric clinic, one internal medicine admission ward and two outpatient healthcare centers was evaluated with a questionnaire focusing on the usefulness of the CDSS. The usage of the system was followed in a log. The CDSS is considered to increase the attention on patients with impaired renal function, provides a better understanding of dosing and is time saving. The calculated glomerular filtration rate (eGFR) and the dosing recommendation classification were perceived useful while the recommendation texts and background had been used to a lesser extent. Few previous systems are used in primary care and cover this number of drugs. The global assessment of the CDSS scored high but some elements were used to a limited extent possibly due to accessibility or that texts were considered difficult to absorb. Choosing a formula for the calculation of eGFR in a CDSS may be problematic. A real-time CDSS to support kidney-related drug prescribing in both hospital and outpatient settings is valuable to the physicians. It has the potential to improve quality of drug prescribing by increasing the attention on patients with renal insufficiency and the knowledge of their drug dosing. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  7. Integrating complex business processes for knowledge-driven clinical decision support systems.

    Science.gov (United States)

    Kamaleswaran, Rishikesan; McGregor, Carolyn

    2012-01-01

    This paper presents in detail the component of the Complex Business Process for Stream Processing framework that is responsible for integrating complex business processes to enable knowledge-driven Clinical Decision Support System (CDSS) recommendations. CDSSs aid the clinician in supporting the care of patients by providing accurate data analysis and evidence-based recommendations. However, the incorporation of a dynamic knowledge-management system that supports the definition and enactment of complex business processes and real-time data streams has not been researched. In this paper we discuss the process web service as an innovative method of providing contextual information to a real-time data stream processing CDSS.

  8. An Evaluation of the Usability of a Computerized Decision Support System for Nursing Homes

    Science.gov (United States)

    Fossum, M.; Ehnfors, M.; Fruhling, A.; Ehrenberg, A.

    2011-01-01

    Background Computerized decision support systems (CDSSs) have the potential to significantly improve the quality of nursing care of older people by enhancing the decision making of nursing personnel. Despite this potential, health care organizations have been slow to incorporate CDSSs into nursing home practices. Objective This study describes facilitators and barriers that impact the ability of nursing personnel to effectively use a clinical CDSS for planning and treating pressure ulcers (PUs) and malnutrition and for following the suggested risk assessment guidelines for the care of nursing home residents. Methods We employed a qualitative descriptive design using varied methods, including structured group interviews, cognitive walkthrough observations and a graphical user interface (GUI) usability evaluation. Group interviews were conducted with 25 nursing personnel from four nursing homes in southern Norway. Five nursing personnel participated in cognitive walkthrough observations and the GUI usability evaluation. Text transcripts were analyzed using qualitative content analysis. Results Group interview participants reported that ease of use, usefulness and a supportive work environment were key facilitators of CDSS use. The barriers identified were lack of training, resistance to using computers and limited integration of the CDSS with the facility’s electronic health record (EHR) system. Key findings from the usability evaluation also identified the difficulty of using the CDSS within the EHR and the poorly designed GUI integration as barriers. Conclusion Overall, we found disconnect between two types of nursing personnel. Those who were comfortable with computer technology reported positive feedback about the CDSS, while others expressed resistance to using the CDSS for various reasons. This study revealed that organizations must invest more resources in educating nursing personnel on the seriousness of PUs and poor nutrition in the elderly, providing

  9. Artificial intelligence techniques applied to the development of a decision–support system for diagnosing celiac disease

    Science.gov (United States)

    Tenório, Josceli Maria; Hummel, Anderson Diniz; Cohrs, Frederico Molina; Sdepanian, Vera Lucia; Pisa, Ivan Torres; de Fátima Marin, Heimar

    2013-01-01

    Background Celiac disease (CD) is a difficult-to-diagnose condition because of its multiple clinical presentations and symptoms shared with other diseases. Gold-standard diagnostic confirmation of suspected CD is achieved by biopsying the small intestine. Objective To develop a clinical decision–support system (CDSS) integrated with an automated classifier to recognize CD cases, by selecting from experimental models developed using intelligence artificial techniques. Methods A web-based system was designed for constructing a retrospective database that included 178 clinical cases for training. Tests were run on 270 automated classifiers available in Weka 3.6.1 using five artificial intelligence techniques, namely decision trees, Bayesian inference, k-nearest neighbor algorithm, support vector machines and artificial neural networks. The parameters evaluated were accuracy, sensitivity, specificity and area under the ROC curve (AUC). AUC was used as a criterion for selecting the CDSS algorithm. A testing database was constructed including 38 clinical CD cases for CDSS evaluation. The diagnoses suggested by CDSS were compared with those made by physicians during patient consultations. Results The most accurate method during the training phase was the averaged one-dependence estimator (AODE) algorithm (a Bayesian classifier), which showed accuracy 80.0%, sensitivity 0.78, specificity 0.80 and AUC 0.84. This classifier was integrated into the web-based decision–support system. The gold-standard validation of CDSS achieved accuracy of 84.2% and k = 0.68 (p < 0.0001) with good agreement. The same accuracy was achieved in the comparison between the physician’s diagnostic impression and the gold standard k = 0. 64 (p < 0.0001). There was moderate agreement between the physician’s diagnostic impression and CDSS k = 0.46 (p = 0.0008). Conclusions The study results suggest that CDSS could be used to help in diagnosing CD, since the algorithm tested achieved excellent

  10. A task-based support architecture for developing point-of-care clinical decision support systems for the emergency department.

    Science.gov (United States)

    Wilk, S; Michalowski, W; O'Sullivan, D; Farion, K; Sayyad-Shirabad, J; Kuziemsky, C; Kukawka, B

    2013-01-01

    The purpose of this study was to create a task-based support architecture for developing clinical decision support systems (CDSSs) that assist physicians in making decisions at the point-of-care in the emergency department (ED). The backbone of the proposed architecture was established by a task-based emergency workflow model for a patient-physician encounter. The architecture was designed according to an agent-oriented paradigm. Specifically, we used the O-MaSE (Organization-based Multi-agent System Engineering) method that allows for iterative translation of functional requirements into architectural components (e.g., agents). The agent-oriented paradigm was extended with ontology-driven design to implement ontological models representing knowledge required by specific agents to operate. The task-based architecture allows for the creation of a CDSS that is aligned with the task-based emergency workflow model. It facilitates decoupling of executable components (agents) from embedded domain knowledge (ontological models), thus supporting their interoperability, sharing, and reuse. The generic architecture was implemented as a pilot system, MET3-AE--a CDSS to help with the management of pediatric asthma exacerbation in the ED. The system was evaluated in a hospital ED. The architecture allows for the creation of a CDSS that integrates support for all tasks from the task-based emergency workflow model, and interacts with hospital information systems. Proposed architecture also allows for reusing and sharing system components and knowledge across disease-specific CDSSs.

  11. ON CODE REFACTORING OF THE DIALOG SUBSYSTEM OF CDSS PLATFORM FOR THE OPEN-SOURCE MIS OPENMRS

    Directory of Open Access Journals (Sweden)

    A. V. Semenets

    2016-08-01

    The open-source MIS OpenMRS developer tools and software API are reviewed. The results of code refactoring of the dialog subsystem of the CDSS platform which is made as module for the open-source MIS OpenMRS are presented. The structure of information model of database of the CDSS dialog subsystem was updated according with MIS OpenMRS requirements. The Model-View-Controller (MVC based approach to the CDSS dialog subsystem architecture was re-implemented with Java programming language using Spring and Hibernate frameworks. The MIS OpenMRS Encounter portlet form for the CDSS dialog subsystem integration is developed as an extension. The administrative module of the CDSS platform is recreated. The data exchanging formats and methods for interaction of OpenMRS CDSS dialog subsystem module and DecisionTree GAE service are re-implemented with help of AJAX technology via jQuery library

  12. Artificial intelligence techniques applied to the development of a decision-support system for diagnosing celiac disease.

    Science.gov (United States)

    Tenório, Josceli Maria; Hummel, Anderson Diniz; Cohrs, Frederico Molina; Sdepanian, Vera Lucia; Pisa, Ivan Torres; de Fátima Marin, Heimar

    2011-11-01

    Celiac disease (CD) is a difficult-to-diagnose condition because of its multiple clinical presentations and symptoms shared with other diseases. Gold-standard diagnostic confirmation of suspected CD is achieved by biopsying the small intestine. To develop a clinical decision-support system (CDSS) integrated with an automated classifier to recognize CD cases, by selecting from experimental models developed using intelligence artificial techniques. A web-based system was designed for constructing a retrospective database that included 178 clinical cases for training. Tests were run on 270 automated classifiers available in Weka 3.6.1 using five artificial intelligence techniques, namely decision trees, Bayesian inference, k-nearest neighbor algorithm, support vector machines and artificial neural networks. The parameters evaluated were accuracy, sensitivity, specificity and area under the ROC curve (AUC). AUC was used as a criterion for selecting the CDSS algorithm. A testing database was constructed including 38 clinical CD cases for CDSS evaluation. The diagnoses suggested by CDSS were compared with those made by physicians during patient consultations. The most accurate method during the training phase was the averaged one-dependence estimator (AODE) algorithm (a Bayesian classifier), which showed accuracy 80.0%, sensitivity 0.78, specificity 0.80 and AUC 0.84. This classifier was integrated into the web-based decision-support system. The gold-standard validation of CDSS achieved accuracy of 84.2% and k=0.68 (pdiagnosis. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  13. [Implementation of ontology-based clinical decision support system for management of interactions between antihypertensive drugs and diet].

    Science.gov (United States)

    Park, Jeong Eun; Kim, Hwa Sun; Chang, Min Jung; Hong, Hae Sook

    2014-06-01

    The influence of dietary composition on blood pressure is an important subject in healthcare. Interactions between antihypertensive drugs and diet (IBADD) is the most important factor in the management of hypertension. It is therefore essential to support healthcare providers' decision making role in active and continuous interaction control in hypertension management. The aim of this study was to implement an ontology-based clinical decision support system (CDSS) for IBADD management (IBADDM). We considered the concepts of antihypertensive drugs and foods, and focused on the interchangeability between the database and the CDSS when providing tailored information. An ontology-based CDSS for IBADDM was implemented in eight phases: (1) determining the domain and scope of ontology, (2) reviewing existing ontology, (3) extracting and defining the concepts, (4) assigning relationships between concepts, (5) creating a conceptual map with CmapTools, (6) selecting upper ontology, (7) formally representing the ontology with Protégé (ver.4.3), (8) implementing an ontology-based CDSS as a JAVA prototype application. We extracted 5,926 concepts, 15 properties, and formally represented them using Protégé. An ontology-based CDSS for IBADDM was implemented and the evaluation score was 4.60 out of 5. We endeavored to map functions of a CDSS and implement an ontology-based CDSS for IBADDM.

  14. Effect of a clinical decision support system on adherence to a lower tidal volume mechanical ventilation strategy

    NARCIS (Netherlands)

    Eslami, Saeid; de Keizer, Nicolette F.; Abu-Hanna, Ameen; de Jonge, Evert; Schultz, Marcus J.

    2009-01-01

    PURPOSE: The purpose of the study was to measure the effect of a computerized decision support system (CDSS) on adherence to tidal volume (V(T)) recommendations. MATERIALS AND METHODS: We performed a prospective before-after evaluation study on applied V(T) to examine the impact of a CDSS on

  15. 'Too much, too late': mixed methods multi-channel video recording study of computerized decision support systems and GP prescribing.

    Science.gov (United States)

    Hayward, James; Thomson, Fionagh; Milne, Heather; Buckingham, Susan; Sheikh, Aziz; Fernando, Bernard; Cresswell, Kathrin; Williams, Robin; Pinnock, Hilary

    2013-06-01

    Computerized decision support systems (CDSS) are commonly deployed to support prescribing, although over-riding of alerts by prescribers remains a concern. We aimed to understand how general practitioners (GPs) interact with prescribing CDSS in order to inform deliberation on how better to support prescribing decisions in primary care. Quantitative and qualitative analysis of interactions between GPs, patients, and computer systems using multi-channel video recordings of 112 primary care consultations with eight GPs in three UK practices. 132 prescriptions were issued in the course of 73 of the consultations, of which 81 (61%) attracted at least one alert. Of the total of 117 alerts, only three resulted in the GP checking, but not altering, the prescription. CDSS provided information and safety alerts at the point of generating a prescription. This was 'too much, too late' as the majority of the 'work' of prescribing occurred prior to using the computer. By the time an alert appeared, the GP had formulated the problem(s), potentially spent several minutes considering, explaining, negotiating, and reaching agreement with the patient about the proposed treatment, and had possibly given instructions and printed an information leaflet. CDSS alerts do not coincide with the prescribing workflow throughout the whole GP consultation. Current systems interrupt to correct decisions that have already been taken, rather than assisting formulation of the management plan. CDSS are likely to be more acceptable and effective if the prescribing support is provided much earlier in the process of generating a prescription.

  16. Promising adoption of an electronic clinical decision support system for antenatal and intrapartum care in rural primary healthcare facilities in sub-Saharan Africa: The QUALMAT experience.

    Science.gov (United States)

    Sukums, Felix; Mensah, Nathan; Mpembeni, Rose; Massawe, Siriel; Duysburgh, Els; Williams, Afua; Kaltschmidt, Jens; Loukanova, Svetla; Haefeli, Walter E; Blank, Antje

    2015-09-01

    The QUALMAT project has successfully implemented an electronic clinical decision support system (eCDSS) for antenatal and intrapartum care in two sub-Saharan African countries. The system was introduced to facilitate adherence to clinical practice guidelines and to support decision making during client encounter to bridge the know-do gap of health workers. This study aimed to describe health workers' acceptance and use of the eCDSS for maternal care in rural primary health care (PHC) facilities of Ghana and Tanzania and to identify factors affecting successful adoption of such a system. This longitudinal study was conducted in Lindi rural district in Tanzania and Kassena-Nankana district in Ghana between October 2011 and December 2013 employing mixed methods. The study population included healthcare workers who were involved in the provision of maternal care in six rural PHC facilities from one district in each country where the eCDSS was implemented. All eCDSS users participated in the study with 61 and 56 participants at the midterm and final assessment, respectively. After several rounds of user training and support the eCDSS has been successfully adopted and constantly used during patient care in antenatal clinics and maternity wards. The eCDSS was used in 71% (2703/3798) and 59% (14,189/24,204) of all ANC clients in Tanzania and Ghana respectively, while it was also used in 83% (1185/1427) and 67% (1435/2144) of all deliveries in Tanzania and in Ghana, respectively. Several barriers reported to hinder eCDSS use were related to individual users, tasks, technology, and organization attributes. Implementation of an eCDSS in resource-constrained PHC facilities in sub-Saharan Africa was successful and the health workers accepted and continuously used the system for maternal care. Facilitators for eCDSS use included sufficient training and regular support whereas the challenges to sustained use were unreliable power supply and perceived high workload. However our

  17. A Clinical Decision Support System for Chronic Pain Management in Primary Care: Usability testing and its relevance.

    Science.gov (United States)

    Nair, Kalpana Maria; Malaeekeh, Raheleh; Schabort, Inge; Taenzer, Paul; Radhakrishnan, Arun; Guenter, Dale

    2015-08-13

    Clinical decision support systems (CDSSs) that are integrated into electronic medical records may be useful for encouraging practice change compliant with clinical practice guidelines. To engage end users to inform early phase CDSS development through a process of usability testing. A sequential exploratory mixed method approach was used. Interprofessional clinician participants (seven in iteration 1 and six in iteration 2) were asked to 'think aloud' while performing various tasks on the CDSS and then complete the System Usability Scale (SUS). Changes were made to the CDSS after each iteration.Results Barriers and facilitators were identified: systemic; user interface (most numerous barriers); content (most numerous facilitators) and technical. The mean SUS score was 81.1 (SD = 12.02) in iteration 1 and 70.40 (SD = 6.78) in iteration 2 (p > 0.05). Qualitative data from usability testing were valuable in the CDSS development process. SUS scores were of limited value at this development stage.

  18. Feasibility study of a clinical decision support system for the management of multimorbid seniors in primary care: study protocol.

    Science.gov (United States)

    Weltermann, Birgitta; Kersting, Christine

    2016-01-01

    Care for seniors is complex because patients often have more than one disease, one medication, and one physician. It is a key challenge for primary care physicians to structure the various aspects of each patient's care, to integrate each patient's preferences, and to maintain a long-term overview. This article describes the design for the development and feasibility testing of the clinical decision support system (CDSS) eCare*Seniors© which is electronic health record (EHR)-based allowing for a long-term, comprehensive, evidence-based, and patient preference-oriented management of multimorbid seniors. This mixed-methods study is designed in three steps. First, focus groups and practice observations will be conducted to develop criteria for software design from a physicians' and practice assistants' perspective. Second, based on these criteria, a CDSS prototype will be developed. Third, the prototype's feasibility will be tested by five primary care practices in the care of 30 multimorbid seniors. Primary outcome is the usability of the software measured by the validated system usability scale (SUS) after 3 months. Secondary outcomes are the (a) willingness to routinely use the CDSS, (b) degree of utilization of the CDSS, (c) acceptance of the CDSS, (d) willingness of the physicians to purchase the CDSS, and (e) willingness of the practice assistants to use the CDSS in the long term. These outcomes will be measured using semi-structured interviews and software usage data. If the SUS score reaches ≥70 %, feasibility testing will be judged successful. Otherwise, the CDSS prototype will be refined according to the users' needs and retested by the physicians and practice assistants until it is fully adapted to their requirements and reaches a usability score ≥70 %. The study will support the development of a CDSS which is primary care-defined, user-friendly, easy-to-comprehend, workflow-oriented, and comprehensive. The software will assist physicians and

  19. A computerized decision support system for depression in primary care.

    Science.gov (United States)

    Kurian, Benji T; Trivedi, Madhukar H; Grannemann, Bruce D; Claassen, Cynthia A; Daly, Ella J; Sunderajan, Prabha

    2009-01-01

    In 2004, results from The Texas Medication Algorithm Project (TMAP) showed better clinical outcomes for patients whose physicians adhered to a paper-and-pencil algorithm compared to patients who received standard clinical treatment for major depressive disorder (MDD). However, implementation of and fidelity to the treatment algorithm among various providers was observed to be inadequate. A computerized decision support system (CDSS) for the implementation of the TMAP algorithm for depression has since been developed to improve fidelity and adherence to the algorithm. This was a 2-group, parallel design, clinical trial (one patient group receiving MDD treatment from physicians using the CDSS and the other patient group receiving usual care) conducted at 2 separate primary care clinics in Texas from March 2005 through June 2006. Fifty-five patients with MDD (DSM-IV criteria) with no significant difference in disease characteristics were enrolled, 32 of whom were treated by physicians using CDSS and 23 were treated by physicians using usual care. The study's objective was to evaluate the feasibility and efficacy of implementing a CDSS to assist physicians acutely treating patients with MDD compared to usual care in primary care. Primary efficacy outcomes for depression symptom severity were based on the 17-item Hamilton Depression Rating Scale (HDRS(17)) evaluated by an independent rater. Patients treated by physicians employing CDSS had significantly greater symptom reduction, based on the HDRS(17), than patients treated with usual care (P < .001). The CDSS algorithm, utilizing measurement-based care, was superior to usual care for patients with MDD in primary care settings. Larger randomized controlled trials are needed to confirm these findings. clinicaltrials.gov Identifier: NCT00551083.

  20. Effects of computerized decision support systems on blood glucose regulation in critically ill surgical patients.

    Science.gov (United States)

    Fogel, Sandy L; Baker, Christopher C

    2013-04-01

    The use of computerized decision support systems (CDSS) in glucose control for critically ill surgical patients has been reported in both diabetic and nondiabetic patients. Prospective studies evaluating its effect on glucose control are, however, lacking. The objective of this study was to evaluate patient-specific computerized IV insulin dosing on blood glucose levels (BGLs) by comparing patients treated pre-CDSS with those treated post-CDSS. A prospective study was performed in 4 surgical ICUs and 1 progressive care unit comparing patient data pre- and post-implementation of CDSS. The primary outcomes measures were the impact of the CDSS on glycemic control in this population and on reducing the incidence of severe hypoglycemia. Data on 1,682 patient admissions were evaluated, which corresponded to 73,290 BGLs post-CDSS compared with 44,972 BGLs pre-CDSS. The percentage of hyperglycemic events improved, with BGLs of >150 mg/dL decreasing by 50% compared with 6-month historical controls during the 18-month study period from July 2010 through December 2011. This was true for all 5 units individually (p < 0.0001, by one sample sign test). In addition, severe hypoglycemia (defined as BGL <40 mg/dL) decreased from 1% to 0.05% after implementing CDSS (p < 0.0001 by 2-sided binomial test). Patients whose BGLs were managed using CDSS were statistically significantly more likely to have a glucose reading under control (<150 mg/dL) than in the 6-month historical controls and to avoid serious hypoglycemia (p < 0.0001). Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

  1. Impact of a Clinical Decision Support System on Pharmacy Clinical Interventions, Documentation Efforts, and Costs

    OpenAIRE

    Calloway, Stacy; Akilo, Hameed A.; Bierman, Kyle

    2013-01-01

    Health care organizations are turning to electronic clinical decision support systems (CDSSs) to increase quality of patient care and promote a safer environment. A CDSS is a promising approach to the aggregation and use of patient data to identify patients who would most benefit from interventions by pharmacy clinicians. However, there are limited published reports describing the impact of CDSS on clinical pharmacy measures. In February 2011, Good Shepherd Medical Center, a 425-bed acute car...

  2. Development and impact of computerised decision support systems for clinical management of depression: A systematic review.

    Science.gov (United States)

    Triñanes, Yolanda; Atienza, Gerardo; Louro-González, Arturo; de-las-Heras-Liñero, Elena; Alvarez-Ariza, María; Palao, Diego J

    2015-01-01

    One of the proposals for improving clinical practice is to introduce computerised decision support systems (CDSS) and integrate these with electronic medical records. Accordingly, this study sought to systematically review evidence on the effectiveness of CDSS in the management of depression. A search was performed in Medline, EMBASE and PsycInfo, in order to do this. The quality of quantitative studies was assessed using the SIGN method, and qualitative studies using the CASPe checklist. Seven studies were identified (3 randomised clinical trials, 3 non-randomised trials, and one qualitative study). The CDSS assessed incorporated content drawn from guidelines and other evidence-based products. In general, the CDSS had a positive impact on different aspects, such as the screening and diagnosis, treatment, improvement in depressive symptoms and quality of life, and referral of patients. The use of CDSS could thus serve to optimise care of depression in various scenarios by providing recommendations based on the best evidence available and facilitating decision-making in clinical practice. Copyright © 2014 SEP y SEPB. Published by Elsevier España. All rights reserved.

  3. Electronic clinical decision support systems attitudes and barriers to use in the oncology setting.

    LENUS (Irish Health Repository)

    Collins, I M

    2012-03-02

    BACKGROUND: There is little evidence regarding attitudes to clinical decision support systems (CDSS) in oncology. AIMS: We examined the current usage, awareness, and concerns of Irish medical oncologists and oncology pharmacists in this area. METHODS: A questionnaire was sent to 27 medical oncologists and 34 oncology pharmacists, identified through professional interest groups. Respondents ranked concerns regarding their use of a CDSS on a scale from 1 to 4, with 4 being most important. RESULTS: Overall, 67% (41\\/61) responded, 48% (13\\/27) of oncologists and 82% (28\\/34) of pharmacists surveyed. Concerns included "difficulty defining complex clinical situations with a set of rules" (mean ± SD) (3.2 ± 0.9), "ensuring evidence base is up to date and relevant" (3.2 ± 0.9) and "lack of clinically relevant suggestions" (2.9 ± 0.9). Ninety-three percent reported using a CDSS but 54% were unaware of this. CONCLUSION: While there are benefits to using a CDSS, concerns must be addressed through user education. This may be a starting point for a user-centred design approach to the development of future local systems through a consultative process.

  4. Computerised decision support systems in order communication for diagnostic, screening or monitoring test ordering: systematic reviews of the effects and cost-effectiveness of systems.

    Science.gov (United States)

    Main, C; Moxham, T; Wyatt, J C; Kay, J; Anderson, R; Stein, K

    2010-10-01

    Order communication systems (OCS) are computer applications used to enter diagnostic and therapeutic patient care orders and to view test results. Many potential benefits of OCS have been identified including improvements in clinician ordering patterns, optimisation of clinical time, and aiding communication processes between clinicians and different departments. Many OCS now include computerised decision support systems (CDSS), which are information systems designed to improve clinical decision-making. CDSS match individual patient characteristics to a computerised knowledge base, and software algorithms generate patient-specific recommendations. To investigate which CDSS in OCS are in use within the UK and the impact of CDSS in OCS for diagnostic, screening or monitoring test ordering compared to OCS without CDSS. To determine what features of CDSS are associated with clinician or patient acceptance of CDSS in OCS and what is known about the cost-effectiveness of CDSS in diagnostic, screening or monitoring test OCS compared to OCS without CDSS. A generic search to identify potentially relevant studies for inclusion was conducted using MEDLINE, EMBASE, Cochrane Controlled Trials Register (CCTR), CINAHL (Cumulative Index to Nursing and Allied Health Literature), DARE (Database of Abstracts of Reviews of Effects), Health Technology Assessment (HTA) database, IEEE (Institute of Electrical and Electronic Engineers) Xplore digital library, NHS Economic Evaluation Database (NHS EED) and EconLit, searched between 1974 and 2009 with a total of 22,109 titles and abstracts screened for inclusion. CDSS for diagnostic, screening and monitoring test ordering OCS in use in the UK were identified through contact with the 24 manufacturers/suppliers currently contracted by the National Project for Information Technology (NpfIT) to provide either national or specialist decision support. A generic search to identify potentially relevant studies for inclusion in the review was

  5. Evaluation of Stream Mining Classifiers for Real-Time Clinical Decision Support System: A Case Study of Blood Glucose Prediction in Diabetes Therapy

    Directory of Open Access Journals (Sweden)

    Simon Fong

    2013-01-01

    Full Text Available Earlier on, a conceptual design on the real-time clinical decision support system (rt-CDSS with data stream mining was proposed and published. The new system is introduced that can analyze medical data streams and can make real-time prediction. This system is based on a stream mining algorithm called VFDT. The VFDT is extended with the capability of using pointers to allow the decision tree to remember the mapping relationship between leaf nodes and the history records. In this paper, which is a sequel to the rt-CDSS design, several popular machine learning algorithms are investigated for their suitability to be a candidate in the implementation of classifier at the rt-CDSS. A classifier essentially needs to accurately map the events inputted to the system into one of the several predefined classes of assessments, such that the rt-CDSS can follow up with the prescribed remedies being recommended to the clinicians. For a real-time system like rt-CDSS, the major technological challenges lie in the capability of the classifier to process, analyze and classify the dynamic input data, quickly and upmost reliably. An experimental comparison is conducted. This paper contributes to the insight of choosing and embedding a stream mining classifier into rt-CDSS with a case study of diabetes therapy.

  6. Change-Point Detection Method for Clinical Decision Support System Rule Monitoring.

    Science.gov (United States)

    Liu, Siqi; Wright, Adam; Hauskrecht, Milos

    2017-06-01

    A clinical decision support system (CDSS) and its components can malfunction due to various reasons. Monitoring the system and detecting its malfunctions can help one to avoid any potential mistakes and associated costs. In this paper, we investigate the problem of detecting changes in the CDSS operation, in particular its monitoring and alerting subsystem, by monitoring its rule firing counts. The detection should be performed online, that is whenever a new datum arrives, we want to have a score indicating how likely there is a change in the system. We develop a new method based on Seasonal-Trend decomposition and likelihood ratio statistics to detect the changes. Experiments on real and simulated data show that our method has a lower delay in detection compared with existing change-point detection methods.

  7. Measuring agreement between decision support reminders: the cloud vs. the local expert

    OpenAIRE

    Dixon, Brian Edward; Simonaitis, Linas; Perkins, Susan M; Wright, Adam; Middleton, Blackford

    2014-01-01

    Background: A cloud-based clinical decision support system (CDSS) was implemented to remotely provide evidence-based guideline reminders in support of preventative health. Following implementation, we measured the agreement between preventive care reminders generated by an existing, local CDSS and the new, cloud-based CDSS operating on the same patient visit data. Methods: Electronic health record data for the same set of patients seen in primary care were sent to both the cloud-based web ser...

  8. Impact of monitoring surgical prophylactic antibiotics and a computerized decision support system on antimicrobial use and antimicrobial resistance.

    Science.gov (United States)

    Huh, Kyungmin; Chung, Doo Ryeon; Park, Hyo Jung; Kim, Min-Ji; Lee, Nam Yong; Ha, Young Eun; Kang, Cheol-In; Peck, Kyong Ran; Song, Jae-Hoon

    2016-09-01

    Monitoring of performance indicators and implementation of a computerized decision support system (CDSS) have been suggested as effective measures to improve quality of care. We conducted this study to evaluate the effect of monitoring of surgical prophylactic antibiotics (SPAs) and the CDSS on the antimicrobial use and resistance rate of major nosocomial pathogens. An interrupted time series with segmented regression analysis in 3 periods (preintervention, SPAs monitoring, and CDSS) was conducted in a tertiary care hospital. Immediate change and change in trends of antimicrobial use density, resistance rate of nosocomial pathogens, and cost of antibiotics in each intervention period were compared with those of the preintervention period. Compared with the preintervention period, the change in the slope of the total use of antibiotics was -8.71 defined daily dose (DDD) per 1,000 patient days per month (95% confidence interval [CI], -11.43 to -5.98; P resistant Pseudomonas aeruginosa, and methicillin-resistant Staphylococcus aureus have been reversed or decreased in slope in the CDSS period. Length of hospital stay also showed a negative change in slope in the CDSS period. Monitoring of SPAs and implementation of the CDSS can be effective measures for antimicrobial stewardship. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  9. Bladder cancer staging in CT urography: effect of stage labels on statistical modeling of a decision support system

    Science.gov (United States)

    Gandikota, Dhanuj; Hadjiiski, Lubomir; Cha, Kenny H.; Chan, Heang-Ping; Caoili, Elaine M.; Cohan, Richard H.; Weizer, Alon; Alva, Ajjai; Paramagul, Chintana; Wei, Jun; Zhou, Chuan

    2018-02-01

    In bladder cancer, stage T2 is an important threshold in the decision of administering neoadjuvant chemotherapy. Our long-term goal is to develop a quantitative computerized decision support system (CDSS-S) to aid clinicians in accurate staging. In this study, we examined the effect of stage labels of the training samples on modeling such a system. We used a data set of 84 bladder cancers imaged with CT Urography (CTU). At clinical staging prior to treatment, 43 lesions were staged as below stage T2 and 41 were stage T2 or above. After cystectomy and pathological staging that is considered the gold standard, 10 of the lesions were upstaged to stage T2 or above. After correcting the stage labels, 33 lesions were below stage T2, and 51 were stage T2 or above. For the CDSS-S, the lesions were segmented using our AI-CALS method and radiomic features were extracted. We trained a linear discriminant analysis (LDA) classifier with leave-one-case-out cross validation to distinguish between bladder lesions of stage T2 or above and those below stage T2. The CDSS-S was trained and tested with the corrected post-cystectomy labels, and as a comparison, CDSS-S was also trained with understaged pre-treatment labels and tested on lesions with corrected labels. The test AUC for the CDSS-S trained with corrected labels was 0.89 +/- 0.04. For the CDSS-S trained with understaged pre-treatment labels and tested on the lesions with corrected labels, the test AUC was 0.86 +/- 0.04. The likelihood of stage T2 or above for 9 out of the 10 understaged lesions was correctly increased for the CDSS-S trained with corrected labels. The CDSS-S is sensitive to the accuracy of stage labeling. The CDSS-S trained with correct labels shows promise in prediction of the bladder cancer stage.

  10. RODOS: a comprehensive European - integrated decision support system for Romania

    International Nuclear Information System (INIS)

    Mateescu, Gh.; Gheorghiu, Adriana; Gheorghiu, Dorina; Slavnicu, Dan; Craciunescu, Teddy

    1998-01-01

    This work is basically dedicated to RODOS (Real-time On-line DecisiOn support System), a comprehensive (computerized) decision support system ((C)DSS), integrated at European scale, which is in progress to be customized and implemented also for Romania to cope with the off-site response to nuclear emergencies. The first part deals with a short introduction regarding the need for a decision support system especially in case of a nuclear accident; there are also briefly reviewed the criteria one could demand that a CDSS should fulfill and the need for CDSS to give unequivocal answers to all encountered matters. Subsequently, there are mentioned some of the most known DSS in the world for off-site response to nuclear emergencies together with certain recent accomplishment of the IAEA in this field. The next chapter is dedicated to the four basic related projects (ECURIE, EURDEP, OSEP and RODOS) of the European Commission whose purpose consists in the optimisation of the nuclear emergency preparedness and response everywhere in Europe. Further on there are presented the basic features (the overall structure and functions), along with component software subsystems of the RODOS and, then, the background of RODOS implementation in Romania is reviewed (Romanian reasons to adhere to the RODOS project, needs, national legal framework and competent authorities in the nuclear domain, national radiological and meteorological networks. Finally, it is shortly reported the present status of RODOS customization and implementation in Romania (RODOS dedicated technical environment, collection of data and their transfer into RoGIS database, real-time on-line connection to networks, collection of data for countermeasure modules, source term assessment for CANDU-reactor, other related achievements) together with some concluding remarks. (authors)

  11. Clinical decision support systems in child and adolescent psychiatry: a systematic review.

    Science.gov (United States)

    Koposov, Roman; Fossum, Sturla; Frodl, Thomas; Nytrø, Øystein; Leventhal, Bennett; Sourander, Andre; Quaglini, Silvana; Molteni, Massimo; de la Iglesia Vayá, María; Prokosch, Hans-Ulrich; Barbarini, Nicola; Milham, Michael Peter; Castellanos, Francisco Xavier; Skokauskas, Norbert

    2017-11-01

    Psychiatric disorders are amongst the most prevalent and impairing conditions in childhood and adolescence. Unfortunately, it is well known that general practitioners (GPs) and other frontline health providers (i.e., child protection workers, public health nurses, and pediatricians) are not adequately trained to address these ubiquitous problems (Braddick et al. Child and Adolescent mental health in Europe: infrastructures, policy and programmes, European Communities, 2009; Levav et al. Eur Child Adolesc Psychiatry 13:395-401, 2004). Advances in technology may offer a solution to this problem with clinical decision support systems (CDSS) that are designed to help professionals make sound clinical decisions in real time. This paper offers a systematic review of currently available CDSS for child and adolescent mental health disorders prepared according to the PRISMA-Protocols (Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols). Applying strict eligibility criteria, the identified studies (n = 5048) were screened. Ten studies, describing eight original clinical decision support systems for child and adolescent psychiatric disorders, fulfilled inclusion criteria. Based on this systematic review, there appears to be a need for a new, readily available CDSS for child neuropsychiatric disorder which promotes evidence-based, best practices, while enabling consideration of national variation in practices by leveraging data-reuse to generate predictions regarding treatment outcome, addressing a broader cluster of clinical disorders, and targeting frontline practice environments.

  12. From an expert-driven paper guideline to a user-centred decision support system: a usability comparison study

    NARCIS (Netherlands)

    Kilsdonk, Ellen; Peute, Linda W.; Riezebos, Rinke J.; Kremer, Leontien C.; Jaspers, Monique W. M.

    2013-01-01

    To assess whether a user-centred prototype clinical decision support system (CDSS) providing patient-specific advice better supports healthcare practitioners in terms of (a) types of usability problems detected and (b) effective and efficient retrieval of childhood cancer survivor's follow-up

  13. Cost-effectiveness of clinical decision support system in improving maternal health care in Ghana.

    Directory of Open Access Journals (Sweden)

    Maxwell Ayindenaba Dalaba

    Full Text Available This paper investigated the cost-effectiveness of a computer-assisted Clinical Decision Support System (CDSS in the identification of maternal complications in Ghana.A cost-effectiveness analysis was performed in a before- and after-intervention study. Analysis was conducted from the provider's perspective. The intervention area was the Kassena- Nankana district where computer-assisted CDSS was used by midwives in maternal care in six selected health centres. Six selected health centers in the Builsa district served as the non-intervention group, where the normal Ghana Health Service activities were being carried out.Computer-assisted CDSS increased the detection of pregnancy complications during antenatal care (ANC in the intervention health centres (before-intervention = 9 /1,000 ANC attendance; after-intervention = 12/1,000 ANC attendance; P-value = 0.010. In the intervention health centres, there was a decrease in the number of complications during labour by 1.1%, though the difference was not statistically significant (before-intervention =107/1,000 labour clients; after-intervention = 96/1,000 labour clients; P-value = 0.305. Also, at the intervention health centres, the average cost per pregnancy complication detected during ANC (cost -effectiveness ratio decreased from US$17,017.58 (before-intervention to US$15,207.5 (after-intervention. Incremental cost -effectiveness ratio (ICER was estimated at US$1,142. Considering only additional costs (cost of computer-assisted CDSS, cost per pregnancy complication detected was US$285.Computer -assisted CDSS has the potential to identify complications during pregnancy and marginal reduction in labour complications. Implementing computer-assisted CDSS is more costly but more effective in the detection of pregnancy complications compared to routine maternal care, hence making the decision to implement CDSS very complex. Policy makers should however be guided by whether the additional benefit is worth

  14. Evaluation of the acceptability and usability of a decision support system to encourage safe and effective use of opioid therapy for chronic, noncancer pain by primary care providers.

    Science.gov (United States)

    Trafton, Jodie; Martins, Susana; Michel, Martha; Lewis, Eleanor; Wang, Dan; Combs, Ann; Scates, Naquell; Tu, Samson; Goldstein, Mary K

    2010-04-01

    To develop and evaluate a clinical decision support system (CDSS) named Assessment and Treatment in Healthcare: Evidenced-Based Automation (ATHENA)-Opioid Therapy, which encourages safe and effective use of opioid therapy for chronic, noncancer pain. CDSS development and iterative evaluation using the analysis, design, development, implementation, and evaluation process including simulation-based and in-clinic assessments of usability for providers followed by targeted system revisions. Volunteers provided detailed feedback to guide improvements in the graphical user interface, and content and design changes to increase clinical usefulness, understandability, clinical workflow fit, and ease of completing guideline recommended practices. Revisions based on feedback increased CDSS usability ratings over time. Practice concerns outside the scope of the CDSS were also identified. Usability testing optimized the CDSS to better address barriers such as lack of provider education, confusion in dosing calculations and titration schedules, access to relevant patient information, provider discontinuity, documentation, and access to validated assessment tools. It also highlighted barriers to good clinical practice that are difficult to address with CDSS technology in its current conceptualization. For example, clinicians indicated that constraints on time and competing priorities in primary care, discomfort in patient-provider communications, and lack of evidence to guide opioid prescribing decisions impeded their ability to provide effective, guideline-adherent pain management. Iterative testing was essential for designing a highly usable and acceptable CDSS; however, identified barriers may limit the impact of the ATHENA-Opioid Therapy system and other CDSS on clinical practices and outcomes unless CDSS are paired with parallel initiatives to address these issues.

  15. The limitations of using the existing TAM in adoption of clinical decision support system in hospitals: An emprical study in Malaysia

    Directory of Open Access Journals (Sweden)

    Pouyan Emaeilzadeh

    2016-01-01

    Physician adoption of clinical information technology is important for its successful implementation. Therefore, the purpose of this study is to gain a better insight about factors affecting physicians’ acceptance of clinical decision support systems (CDSS in a hospital setting. The results reflect the importance of perceived threat to professional autonomy, perceived interactivity with clinical IT, perceived usefulness and perceived ease of use in determining physicians’ intention to use CDSS.

  16. Electronic health records (EHRs): supporting ASCO's vision of cancer care.

    Science.gov (United States)

    Yu, Peter; Artz, David; Warner, Jeremy

    2014-01-01

    ASCO's vision for cancer care in 2030 is built on the expanding importance of panomics and big data, and envisions enabling better health for patients with cancer by the rapid transformation of systems biology knowledge into cancer care advances. This vision will be heavily dependent on the use of health information technology for computational biology and clinical decision support systems (CDSS). Computational biology will allow us to construct models of cancer biology that encompass the complexity of cancer panomics data and provide us with better understanding of the mechanisms governing cancer behavior. The Agency for Healthcare Research and Quality promotes CDSS based on clinical practice guidelines, which are knowledge bases that grow too slowly to match the rate of panomic-derived knowledge. CDSS that are based on systems biology models will be more easily adaptable to rapid advancements and translational medicine. We describe the characteristics of health data representation, a model for representing molecular data that supports data extraction and use for panomic-based clinical research, and argue for CDSS that are based on systems biology and are algorithm-based.

  17. The role of the Pharmacist in the design, development and implementation of Medication Prescription Support Systems

    Directory of Open Access Journals (Sweden)

    Núria Solà Bonada

    2016-11-01

    Full Text Available Clinical Decision Support Systems (CDSS are computerized tools designed to help healthcare professionals to make clinical and therapeutic decisions, with the objective of improving patient care. Prescription-targeted CDSS have the highest impact in improving patient safety. Although there are different designs and functionalities, all these systems will combine clinical knowledge and patient information in a smart manner, in order to improve the prescription process. With the emergence of new technologies and advances in smart decision systems, the implementation of said systems can achieve an important improvement in terms of the prescription process and patient safety. The design and implementation of these systems should be performed by a multidisciplinary team of professionals, where Pharmacists will play an important role due to their technical knowledge about medications and the technologies associated to their use. This article aims to provide basic guidelines for the design and adequate implementation, monitoring and follow-up of Clinical Decision Support Systems within the setting of pharmacological prescription.

  18. Evaluation of a Clinical Decision Support System for Dyslipidemia Treatment (HTE-DLPR by QoE questionnaire

    Directory of Open Access Journals (Sweden)

    Alberto Zamora

    2017-01-01

    Full Text Available Introduction: Clinical decision support systems (CDSS are computer systems designed to assist clinicians with patient-related decision making, such as diagnosis and treatment. CDSS have shown to improve both patient outcomes and cost of care.Methods: A multi-center observational prospective study was conducted. Ten physicians agreed to participate. Seventy-seven patients with high or very high cardiovascular risk were included. After using CDSS for dyslipidemia (HTE-DLPR for a 3 months period, participants were asked to evaluate their experience with HTE-DLPR using a quality of experience questionnaire (QoE tool for mHealth applications.Results: Total score on the QoE was 3.89 out of 5. The highest scores were received for precision, ease of use and content quality. The lowest scores were given to security, appearance and performance. Physicians were in strong agreement with the 1st HTEDLPR recommendation in 86.1% and the system’s use was described as comfortablein 85% of cases. Users positively evaluated the development of a new version of HTEDLPR in the future receiving a total score of 4.25 out of 5.Conclusions: A CDSS for dyslipidemia (HTE-DLP has been positively evaluated by physicians using QoE questionnaire.

  19. Decision support systems in clinical practice: The case of venous thromboembolism prevention.

    Science.gov (United States)

    Nazarenko, G I; Kleymenova, E B; Payushik, S A; Otdelenov, V A; Sychev, D A; Yashina, L P

    2015-01-01

    Today medicine is facing a "knowledge crisis" in that explosively expanding medical knowledge encounters limited abilities to disseminate new practices [1]. Clinical practice guidelines (CPGs) are intended to promote high standards of care in specific areas of medicine by summarizing best clinical practice based on careful reviews of current research. However, doctors are often short of time to study these documents and check their updates, have little motivation for strict adherence to them. A systematic review of 11 studies reporting on 29 recommendations has found that median adherence to all recommendations was 34%, suggesting that potential benefits for patients from health research may be lost [2].Clinical decision support systems (CDSS) can serve as a knowledge translation tool, mediator between clinical guidelines and physicians by providing the right information to the right person at the right time. To evaluate the effectiveness of implementation of international and national CPGs for venous thromboembolism (VTE) prevention with the help of CDSS in a general hospital. A multifunctional CDSS based on national and international guidelines on the VTE prevention was developed and implemented in the Medical Center of the Bank of Russia (MC). The system has the following functionalities: 1) it supports the decision on the VTE prevention based on individual risk assessment of thrombosis (scales of Caprini, Rogers and Khorana, Padua Prediction Score, additional risk factors) and bleeding (IMPROVE scale for non-surgical patients, major bleeding scale for surgical patients and major orthopedic surgeries, hemorrhagic complications risk in cancer patients); 2) generates the summary containing the grade of recommendations and the level of evidence, personalized recommendations on regimen and duration of preventive antithrombotic therapy, dose correction according to creatinine clearance; 3) provides an audit form for and statistical analysis of VTE cases; 3

  20. Measuring agreement between decision support reminders: the cloud vs. the local expert.

    Science.gov (United States)

    Dixon, Brian Edward; Simonaitis, Linas; Perkins, Susan M; Wright, Adam; Middleton, Blackford

    2014-04-10

    A cloud-based clinical decision support system (CDSS) was implemented to remotely provide evidence-based guideline reminders in support of preventative health. Following implementation, we measured the agreement between preventive care reminders generated by an existing, local CDSS and the new, cloud-based CDSS operating on the same patient visit data. Electronic health record data for the same set of patients seen in primary care were sent to both the cloud-based web service and local CDSS. The clinical reminders returned by both services were captured for analysis. Cohen's Kappa coefficient was calculated to compare the two sets of reminders. Kappa statistics were further adjusted for prevalence and bias due to the potential effects of bias in the CDS logic and prevalence in the relative small sample of patients. The cloud-based CDSS generated 965 clinical reminders for 405 patient visits over 3 months. The local CDSS returned 889 reminders for the same patient visit data. When adjusted for prevalence and bias, observed agreement varied by reminder from 0.33 (95% CI 0.24 - 0.42) to 0.99 (95% CI 0.97 - 1.00) and demonstrated almost perfect agreement for 7 of the 11 reminders. Preventive care reminders delivered by two disparate CDS systems show substantial agreement. Subtle differences in rule logic and terminology mapping appear to account for much of the discordance. Cloud-based CDSS therefore show promise, opening the door for future development and implementation in support of health care providers with limited resources for knowledge management of complex logic and rules.

  1. Integration of Hospital Information and Clinical Decision Support Systems to Enable the Reuse of Electronic Health Record Data.

    Science.gov (United States)

    Kopanitsa, Georgy

    2017-05-18

    The efficiency and acceptance of clinical decision support systems (CDSS) can increase if they reuse medical data captured during health care delivery. High heterogeneity of the existing legacy data formats has become the main barrier for the reuse of data. Thus, we need to apply data modeling mechanisms that provide standardization, transformation, accumulation and querying medical data to allow its reuse. In this paper, we focus on the interoperability issues of the hospital information systems (HIS) and CDSS data integration. Our study is based on the approach proposed by Marcos et al. where archetypes are used as a standardized mechanism for the interaction of a CDSS with an electronic health record (EHR). We build an integration tool to enable CDSSs collect data from various institutions without a need for modifications in the implementation. The approach implies development of a conceptual level as a set of archetypes representing concepts required by a CDSS. Treatment case data from Regional Clinical Hospital in Tomsk, Russia was extracted, transformed and loaded to the archetype database of a clinical decision support system. Test records' normalization has been performed by defining transformation and aggregation rules between the EHR data and the archetypes. These mapping rules were used to automatically generate openEHR compliant data. After the transformation, archetype data instances were loaded into the CDSS archetype based data storage. The performance times showed acceptable performance for the extraction stage with a mean of 17.428 s per year (3436 case records). The transformation times were also acceptable with 136.954 s per year (0.039 s per one instance). The accuracy evaluation showed the correctness and applicability of the method for the wide range of HISes. These operations were performed without interrupting the HIS workflow to prevent the HISes from disturbing the service provision to the users. The project results have proven that

  2. The potential value on medication safety of a clinical decision support system in intensive care patients with renal insufficiency.

    NARCIS (Netherlands)

    Helmons, P.J.; Grouls, R.J.E.; Roos, A.N.; Bindels, A.J.G.H.; Clercq, de P.A.; Wessels-Basten, S.J.W.; Ackerman, E.W.; Korsten, H.H.M.

    2007-01-01

    Clinical decision support systems (CDSS) are defined as electronic or non-electronic systems designed to aid in clinical decision making, using characteristics of individual patients to generate patient-specific assessments or recommendations that are then presented to clinicians for consideration

  3. Guidelines for maternal and neonatal "point of care": needs of and attitudes towards a computerized clinical decision support system in rural Burkina Faso.

    Science.gov (United States)

    Zakane, S Alphonse; Gustafsson, Lars L; Tomson, Göran; Loukanova, Svetla; Sié, Ali; Nasiell, Josefine; Bastholm-Rahmner, Pia

    2014-06-01

    In 2010, 245,000 women died due to pregnancy-related causes in sub-Saharan Africa and southern Asia. Our study is nested into the QUALMAT project and seeks to improve the quality of maternal care services through the introduction of a computerized clinical decision support system (CDSS) to help healthcare workers in rural areas. Healthcare information technology applications in low-income countries may improve healthcare provision but recent studies demonstrate unintended consequences with underuse or resistance to CDSS and that the fit between the system and the clinical needs does present challenges. To explore and describe perceived needs and attitudes among healthcare workers to access WHO guidelines using CDSS in maternal and neonatal care in rural Burkina Faso. Data were collected with semi-structured interviews in two rural districts in Burkina Faso with 45 informants. Descriptive statistics were used for the analysis of the quantitative part of the interview corresponding to informants' background. Qualitative data were analyzed using manifest content analysis. Four main findings emerged: (a) an appreciable willingness among healthcare workers for and a great interest to adapt and use modern technologies like computers to learn more in the workplace, (b) a positive attitude to easy access of guidelines and implementation of decision-support using computers in the workplace, (c) a fear that the CDSS would require more working time and lead to double-work, and (d) that the CDSS is complicated and requires substantial computer training and extensive instructions to fully implement. The findings can be divided into aspects of motivators and barriers in relation to how the CDSS is perceived and to be used. These aspects are closely connected to each other as the motivating aspects can easily be turned into barriers if not taken care of properly in the final design, during implementation and maintenance of the CDSS at point of care. Copyright © 2014 Elsevier

  4. Information Engineering and Workflow Design in a Clinical Decision Support System for Colorectal Cancer Screening in Iran.

    Science.gov (United States)

    Maserat, Elham; Seied Farajollah, Seiede Sedigheh; Safdari, Reza; Ghazisaeedi, Marjan; Aghdaei, Hamid Asadzadeh; Zali, Mohammad Reza

    2015-01-01

    Colorectal cancer is a major cause of morbidity and mortality throughout the world. Colorectal cancer screening is an optimal way for reducing of morbidity and mortality and a clinical decision support system (CDSS) plays an important role in predicting success of screening processes. DSS is a computer-based information system that improves the delivery of preventive care services. The aim of this article was to detail engineering of information requirements and work flow design of CDSS for a colorectal cancer screening program. In the first stage a screening minimum data set was determined. Developed and developing countries were analyzed for identifying this data set. Then information deficiencies and gaps were determined by check list. The second stage was a qualitative survey with a semi-structured interview as the study tool. A total of 15 users and stakeholders' perspectives about workflow of CDSS were studied. Finally workflow of DSS of control program was designed by standard clinical practice guidelines and perspectives. Screening minimum data set of national colorectal cancer screening program was defined in five sections, including colonoscopy data set, surgery, pathology, genetics and pedigree data set. Deficiencies and information gaps were analyzed. Then we designed a work process standard of screening. Finally workflow of DSS and entry stage were determined. A CDSS facilitates complex decision making for screening and has key roles in designing optimal interactions between colonoscopy, pathology and laboratory departments. Also workflow analysis is useful to identify data reconciliation strategies to address documentation gaps. Following recommendations of CDSS should improve quality of colorectal cancer screening.

  5. Mortality Benefits of Antibiotic Computerised Decision Support System: Modifying Effects of Age

    Science.gov (United States)

    Chow, Angela L. P.; Lye, David C.; Arah, Onyebuchi A.

    2015-11-01

    Antibiotic computerised decision support systems (CDSSs) are shown to improve antibiotic prescribing, but evidence of beneficial patient outcomes is limited. We conducted a prospective cohort study in a 1500-bed tertiary-care hospital in Singapore, to evaluate the effectiveness of the hospital’s antibiotic CDSS on patients’ clinical outcomes, and the modification of these effects by patient factors. To account for clustering, we used multilevel logistic regression models. One-quarter of 1886 eligible inpatients received CDSS-recommended antibiotics. Receipt of antibiotics according to CDSS’s recommendations seemed to halve mortality risk of patients (OR 0.54, 95% CI 0.26-1.10, P = 0.09). Patients aged ≤65 years had greater mortality benefit (OR 0.45, 95% CI 0.20-1.00, P = 0.05) than patients that were older than 65 (OR 1.28, 95% CI 0.91-1.82, P = 0.16). No effect was observed on incidence of Clostridium difficile (OR 1.02, 95% CI 0.34-3.01), and multidrug-resistant organism (OR 1.06, 95% CI 0.42-2.71) infections. No increase in infection-related readmission (OR 1.16, 95% CI 0.48-2.79) was found in survivors. Receipt of CDSS-recommended antibiotics reduced mortality risk in patients aged 65 years or younger and did not increase the risk in older patients. Physicians should be informed of the benefits to increase their acceptance of CDSS recommendations.

  6. Evaluating a Clinical Decision Support Interface for End-of-Life Nurse Care.

    Science.gov (United States)

    Febretti, Alessandro; Stifter, Janet; Keenan, Gail M; Lopez, Karen D; Johnson, Andrew; Wilkie, Diana J

    2014-01-01

    Clinical Decision Support Systems (CDSS) are tools that assist healthcare personnel in the decision-making process for patient care. Although CDSSs have been successfully deployed in the clinical setting to assist physicians, few CDSS have been targeted at professional nurses, the largest group of health providers. We present our experience in designing and testing a CDSS interface embedded within a nurse care planning and documentation tool. We developed four prototypes based on different CDSS feature designs, and tested them in simulated end-of-life patient handoff sessions with a group of 40 nurse clinicians. We show how our prototypes directed nurses towards an optimal care decision that was rarely performed in unassisted practice. We also discuss the effect of CDSS layout and interface navigation in a nurse's acceptance of suggested actions. These findings provide insights into effective nursing CDSS design that are generalizable to care scenarios different than end-of-life.

  7. Multidisciplinary Modelling of Symptoms and Signs with Archetypes and SNOMED-CT for Clinical Decision Support.

    Science.gov (United States)

    Marco-Ruiz, Luis; Maldonado, J Alberto; Karlsen, Randi; Bellika, Johan G

    2015-01-01

    Clinical Decision Support Systems (CDSS) help to improve health care and reduce costs. However, the lack of knowledge management and modelling hampers their maintenance and reuse. Current EHR standards and terminologies can allow the semantic representation of the data and knowledge of CDSS systems boosting their interoperability, reuse and maintenance. This paper presents the modelling process of respiratory conditions' symptoms and signs by a multidisciplinary team of clinicians and information architects with the help of openEHR, SNOMED and clinical information modelling tools for a CDSS. The information model of the CDSS was defined by means of an archetype and the knowledge model was implemented by means of an SNOMED-CT based ontology.

  8. Intention to adopt clinical decision support systems in a developing country: effect of Physician’s perceived professional autonomy, involvement and belief: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Sambasivan Murali

    2012-12-01

    Full Text Available Abstract Background Computer-based clinical decision support systems (CDSS are regarded as a key element to enhance decision-making in a healthcare environment to improve the quality of medical care delivery. The concern of having new CDSS unused is still one of the biggest issues in developing countries for the developers and implementers of clinical IT systems. The main objectives of this study are to determine whether (1 the physician’s perceived professional autonomy, (2 involvement in the decision to implement CDSS and (3 the belief that CDSS will improve job performance increase the intention to adopt CDSS. Four hypotheses were formulated and tested. Methods A questionnaire-based survey conducted between July 2010 and December 2010. The study was conducted in seven public and five private hospitals in Kuala Lumpur, Malaysia. Before contacting the hospitals, necessary permission was obtained from the Ministry of Health, Malaysia and the questionnaire was vetted by the ethics committee of the ministry. Physicians working in 12 hospitals from 10 different specialties participated in the study. The sampling method used was stratified random sampling and the physicians were stratified based on the specialty. A total of 450 physicians were selected using a random number generator. Each of these physicians was given a questionnaire and out of 450 questionnaires, 335 (response rate – 74% were returned and 309 (69% were deemed usable. Results The hypotheses were tested using Structural Equation Modeling (SEM. Salient results are: (1 Physicians’ perceived threat to professional autonomy lowers the intention to use CDSS (p Conclusion The proposed model with the three main constructs (physician’s professional characteristic, involvement and belief explains 47% of the variance in the intention to use CDSS. This is significantly higher than the models addressed so far. The results will have a major impact in implementing CDSS in developing

  9. ON THE CDSS PLATFORM DEVELOPMENT FOR THE OPEN-SOURCE MIS OPENEMR

    Directory of Open Access Journals (Sweden)

    A. V. Semenets

    2015-10-01

    An approach to the decision making process which is based on the decision tree algorithm usage is proposed. An implementation of the given above approach as separate web-service based won the Google App Engine (GAE capabilities is presented. The data exchanging formats and methods which OpenEMR CDSS module and DecissionTree GAE service interaction establish are developed.

  10. Development and Implementation of the Clinical Decision Support System for Patients With Cancer and Nurses' Experiences Regarding the System.

    Science.gov (United States)

    Yılmaz, Arzu Akman; Ozdemir, Leyla

    2017-01-01

    The purpose of this study was to develop and implement the clinical decision support system (CDSS) for oncology nurses in the care of patients with cancer and to explore the nurses' experiences about the system. The study was conducted using a mixed-methods research design with 14 nurses working at a gynecological oncology clinic at a university hospital in Turkey. The nurses stated that they did not experience any problems during the implementation of the CDSS, and its usage facilitated the assessment of patients' needs and care management. The results indicated that the CDSS supported the nurses' decision-making process about patients' needs and preparation of individual care plans. The CDSS should be developed and implemented by the nurses working with patients with cancer. AMAÇ: Amaç kanser hastalarının bakımına yönelik klinik karar destek sistemi oluşturmak, uygulamak (KKDS) ve sistemi kullanan hemşirelerin deneyimlerini incelemektir. YÖNTEM: Çalışma kalitatif ve kantitatif araştırma yöntemleri kullanılarak Türkiyede'ki bir üniversite hastanesinin jinekolojik onkoloji servisinde çalışan 14 hemşire ile yürütülmüştür. Hemşireler KKDS'ni kullanırken herhangi bir sorun yaşamadıklarını ve sistemin hasta gereksinimlerini değerlendirmeyi ve bakım yönetimini kolaylaştırdığını belirtmişlerdir. SONUÇ: Bulgular hastanın gereksinimlerine karar verme sürecinde ve bireysel bakım planları hazırlamada KKDS'nin hemşireleri desteklediğini göstermektedir. HEMŞIRELIK UYGULAMALARI IÇIN ÖNERILER: Kanserli hastaların bakımına yönelik KKDS geliştirilebilir ve hemşireler tarafından klinikte kullanılabilir. © 2015 NANDA International, Inc.

  11. Modeling the Construct of an Expert Evidence-Adaptive Knowledge Base for a Pressure Injury Clinical Decision Support System

    Directory of Open Access Journals (Sweden)

    Peck Chui Betty Khong

    2017-07-01

    Full Text Available The selection of appropriate wound products for the treatment of pressure injuries is paramount in promoting wound healing. However, nurses find it difficult to decide on the most optimal wound product(s due to limited live experiences in managing pressure injuries resulting from successfully implemented pressure injury prevention programs. The challenges of effective decision-making in wound treatments by nurses at the point of care are compounded by the yearly release of wide arrays of newly researched wound products into the consumer market. A clinical decision support system for pressure injury (PI-CDSS was built to facilitate effective decision-making and selection of optimal wound treatments. This paper describes the development of PI-CDSS with an expert knowledge base using an interactive development environment, Blaze Advisor. A conceptual framework using decision-making and decision theory, knowledge representation, and process modelling guided the construct of the PI-CDSS. This expert system has incorporated the practical and relevant decision knowledge of wound experts in assessment and wound treatments in its algorithm. The construct of the PI-CDSS is adaptive, with scalable capabilities for expansion to include other CDSSs and interoperability to interface with other existing clinical and administrative systems. The algorithm was formatively evaluated and tested for usability. The treatment modalities generated after using patient-specific assessment data were found to be consistent with the treatment plan(s proposed by the wound experts. The overall agreement exceeded 90% between the wound experts and the generated treatment modalities for the choice of wound products, instructions, and alerts. The PI-CDSS serves as a just-in-time wound treatment protocol with suggested clinical actions for nurses, based on the best evidence available.

  12. Computerised Decision Support Systems for the management of freshwater radioecological emergencies: assessment of the state-of-the-art with respect to the experiences and needs of end-users

    International Nuclear Information System (INIS)

    Hofman, D.; Monte, L.; Boyer, P.; Brittain, J.; Donchyts, G.; Gallego, E.; Gheorghiu, D.; Hakanson, L.; Heling, R.; Kerekes, A.; Kocsy, G.; Lepicard, S.; Slavik, O.; Slavnicu, D.; Smith, J.; Zheleznyak, M.

    2011-01-01

    Assessment of the environmental and radiological consequences of a nuclear accident requires the management of a great deal of data and information as well as the use of predictive models. Computerised Decision Support Systems (CDSS) are essential tools for this kind of complex assessment and for assisting experts with a rational decision process. The present work focuses on the assessment of the main features of selected state-of-the-art CDSS for off-site management of freshwater ecosystems contaminated by radionuclides. This study involved both developers and end-users of the assessed CDSS and was based on practical customisation exercises, installation and application of the decision systems. Potential end-users can benefit from the availability of several ready-to-use CDSS that allow one to run different kinds of models aimed at predicting the behaviour of radionuclides in aquatic ecosystems, evaluating doses to humans, assessing the effectiveness of different kinds of environmental management interventions and ranking these interventions, accounting for their social, economic and environmental impacts. As a result of the present assessment, the importance of CDSS 'integration' became apparent: in many circumstances, different CDSS can be used as complementary tools for the decision-making process. The results of this assessment can also be useful for the future development and improvement of the CDSS. - Research highlights: →The present work focuses on the assessment of the main features of selected state-of-the-art CDSS for the off-site management of freshwater ecosystems contaminated by radionuclides. →Potential end-users can benefit from a number of complementary open, freely-available and ready-to-use CDSS based on validated environmental models aimed at predicting the migration of radionuclides in the aquatic environment, evaluating the doses to man, assessing the effectiveness of different environmental feasible restoration strategies and

  13. Social, Organizational, and Contextual Characteristics of Clinical Decision Support Systems for Intensive Insulin Therapy: A Literature Review and Case Study

    Science.gov (United States)

    Campion, Thomas R.; Waitman, Lemuel R.; May, Addison K.; Ozdas, Asli; Lorenzi, Nancy M.; Gadd, Cynthia S.

    2009-01-01

    Introduction: Evaluations of computerized clinical decision support systems (CDSS) typically focus on clinical performance changes and do not include social, organizational, and contextual characteristics explaining use and effectiveness. Studies of CDSS for intensive insulin therapy (IIT) are no exception, and the literature lacks an understanding of effective computer-based IIT implementation and operation. Results: This paper presents (1) a literature review of computer-based IIT evaluations through the lens of institutional theory, a discipline from sociology and organization studies, to demonstrate the inconsistent reporting of workflow and care process execution and (2) a single-site case study to illustrate how computer-based IIT requires substantial organizational change and creates additional complexity with unintended consequences including error. Discussion: Computer-based IIT requires organizational commitment and attention to site-specific technology, workflow, and care processes to achieve intensive insulin therapy goals. The complex interaction between clinicians, blood glucose testing devices, and CDSS may contribute to workflow inefficiency and error. Evaluations rarely focus on the perspective of nurses, the primary users of computer-based IIT whose knowledge can potentially lead to process and care improvements. Conclusion: This paper addresses a gap in the literature concerning the social, organizational, and contextual characteristics of CDSS in general and for intensive insulin therapy specifically. Additionally, this paper identifies areas for future research to define optimal computer-based IIT process execution: the frequency and effect of manual data entry error of blood glucose values, the frequency and effect of nurse overrides of CDSS insulin dosing recommendations, and comprehensive ethnographic study of CDSS for IIT. PMID:19815452

  14. Social, organizational, and contextual characteristics of clinical decision support systems for intensive insulin therapy: a literature review and case study.

    Science.gov (United States)

    Campion, Thomas R; Waitman, Lemuel R; May, Addison K; Ozdas, Asli; Lorenzi, Nancy M; Gadd, Cynthia S

    2010-01-01

    Evaluations of computerized clinical decision support systems (CDSS) typically focus on clinical performance changes and do not include social, organizational, and contextual characteristics explaining use and effectiveness. Studies of CDSS for intensive insulin therapy (IIT) are no exception, and the literature lacks an understanding of effective computer-based IIT implementation and operation. This paper presents (1) a literature review of computer-based IIT evaluations through the lens of institutional theory, a discipline from sociology and organization studies, to demonstrate the inconsistent reporting of workflow and care process execution and (2) a single-site case study to illustrate how computer-based IIT requires substantial organizational change and creates additional complexity with unintended consequences including error. Computer-based IIT requires organizational commitment and attention to site-specific technology, workflow, and care processes to achieve intensive insulin therapy goals. The complex interaction between clinicians, blood glucose testing devices, and CDSS may contribute to workflow inefficiency and error. Evaluations rarely focus on the perspective of nurses, the primary users of computer-based IIT whose knowledge can potentially lead to process and care improvements. This paper addresses a gap in the literature concerning the social, organizational, and contextual characteristics of CDSS in general and for intensive insulin therapy specifically. Additionally, this paper identifies areas for future research to define optimal computer-based IIT process execution: the frequency and effect of manual data entry error of blood glucose values, the frequency and effect of nurse overrides of CDSS insulin dosing recommendations, and comprehensive ethnographic study of CDSS for IIT. Copyright (c) 2009. Published by Elsevier Ireland Ltd.

  15. Acceptance of clinical decision support surveillance technology in the clinical pharmacy.

    Science.gov (United States)

    English, Dan; Ankem, Kalyani; English, Kathleen

    2017-03-01

    There are clinical and economic benefits to incorporating clinical decision support systems (CDSSs) in patient care interventions in the clinical pharmacy setting. However, user dissatisfaction and resistance to HIT can prevent optimal use of such systems, particularly when users employ system workarounds and overrides. The present study applied a modified version of the unified theory of acceptance and use of technology (UTAUT) to evaluate the disposition and satisfaction with CDSS among clinical pharmacists who perform surveillance to identify potential medication therapy interventions on patients in the hospital setting. A survey of clinical pharmacists (N = 48) was conducted. Partial least squares (PLS) regression was used to analyze the influence of the UTAUT-related variables on behavioral intention and satisfaction with CDSS among clinical pharmacists. While behavioral intention did not predict actual use of HIT, facilitating conditions had a direct effect on pharmacists' use of CDSS. Likewise, satisfaction with CDSS was found to have a direct effect on use, with more satisfied users being less inclined to employ workarounds or overrides of the system. Based on the findings, organizational structures that facilitate CDSS use and user satisfaction affect the extent to which pharmacy and health care management maximize use in the clinical pharmacy setting.

  16. An Intelligent Clinical Decision Support System for Patient-Specific Predictions to Improve Cervical Intraepithelial Neoplasia Detection

    Directory of Open Access Journals (Sweden)

    Panagiotis Bountris

    2014-01-01

    Full Text Available Nowadays, there are molecular biology techniques providing information related to cervical cancer and its cause: the human Papillomavirus (HPV, including DNA microarrays identifying HPV subtypes, mRNA techniques such as nucleic acid based amplification or flow cytometry identifying E6/E7 oncogenes, and immunocytochemistry techniques such as overexpression of p16. Each one of these techniques has its own performance, limitations and advantages, thus a combinatorial approach via computational intelligence methods could exploit the benefits of each method and produce more accurate results. In this article we propose a clinical decision support system (CDSS, composed by artificial neural networks, intelligently combining the results of classic and ancillary techniques for diagnostic accuracy improvement. We evaluated this method on 740 cases with complete series of cytological assessment, molecular tests, and colposcopy examination. The CDSS demonstrated high sensitivity (89.4%, high specificity (97.1%, high positive predictive value (89.4%, and high negative predictive value (97.1%, for detecting cervical intraepithelial neoplasia grade 2 or worse (CIN2+. In comparison to the tests involved in this study and their combinations, the CDSS produced the most balanced results in terms of sensitivity, specificity, PPV, and NPV. The proposed system may reduce the referral rate for colposcopy and guide personalised management and therapeutic interventions.

  17. An intelligent clinical decision support system for patient-specific predictions to improve cervical intraepithelial neoplasia detection.

    Science.gov (United States)

    Bountris, Panagiotis; Haritou, Maria; Pouliakis, Abraham; Margari, Niki; Kyrgiou, Maria; Spathis, Aris; Pappas, Asimakis; Panayiotides, Ioannis; Paraskevaidis, Evangelos A; Karakitsos, Petros; Koutsouris, Dimitrios-Dionyssios

    2014-01-01

    Nowadays, there are molecular biology techniques providing information related to cervical cancer and its cause: the human Papillomavirus (HPV), including DNA microarrays identifying HPV subtypes, mRNA techniques such as nucleic acid based amplification or flow cytometry identifying E6/E7 oncogenes, and immunocytochemistry techniques such as overexpression of p16. Each one of these techniques has its own performance, limitations and advantages, thus a combinatorial approach via computational intelligence methods could exploit the benefits of each method and produce more accurate results. In this article we propose a clinical decision support system (CDSS), composed by artificial neural networks, intelligently combining the results of classic and ancillary techniques for diagnostic accuracy improvement. We evaluated this method on 740 cases with complete series of cytological assessment, molecular tests, and colposcopy examination. The CDSS demonstrated high sensitivity (89.4%), high specificity (97.1%), high positive predictive value (89.4%), and high negative predictive value (97.1%), for detecting cervical intraepithelial neoplasia grade 2 or worse (CIN2+). In comparison to the tests involved in this study and their combinations, the CDSS produced the most balanced results in terms of sensitivity, specificity, PPV, and NPV. The proposed system may reduce the referral rate for colposcopy and guide personalised management and therapeutic interventions.

  18. Cost of installing and operating an electronic clinical decision support system for maternal health care: case of Tanzania rural primary health centres.

    Science.gov (United States)

    Saronga, Happiness Pius; Dalaba, Maxwell Ayindenaba; Dong, Hengjin; Leshabari, Melkizedeck; Sauerborn, Rainer; Sukums, Felix; Blank, Antje; Kaltschmidt, Jens; Loukanova, Svetla

    2015-04-02

    Poor quality of care is among the causes of high maternal and newborn disease burden in Tanzania. Potential reason for poor quality of care is the existence of a "know-do gap" where by health workers do not perform to the best of their knowledge. An electronic clinical decision support system (CDSS) for maternal health care was piloted in six rural primary health centers of Tanzania to improve performance of health workers by facilitating adherence to World Health Organization (WHO) guidelines and ultimately improve quality of maternal health care. This study aimed at assessing the cost of installing and operating the system in the health centers. This retrospective study was conducted in Lindi, Tanzania. Costs incurred by the project were analyzed using Ingredients approach. These costs broadly included vehicle, computers, furniture, facility, CDSS software, transport, personnel, training, supplies and communication. These were grouped into installation and operation cost; recurrent and capital cost; and fixed and variable cost. We assessed the CDSS in terms of its financial and economic cost implications. We also conducted a sensitivity analysis on the estimations. Total financial cost of CDSS intervention amounted to 185,927.78 USD. 77% of these costs were incurred in the installation phase and included all the activities in preparation for the actual operation of the system for client care. Generally, training made the largest share of costs (33% of total cost and more than half of the recurrent cost) followed by CDSS software- 32% of total cost. There was a difference of 31.4% between the economic and financial costs. 92.5% of economic costs were fixed costs consisting of inputs whose costs do not vary with the volume of activity within a given range. Economic cost per CDSS contact was 52.7 USD but sensitive to discount rate, asset useful life and input cost variations. Our study presents financial and economic cost estimates of installing and operating an

  19. Costs associated with implementation of computer-assisted clinical decision support system for antenatal and delivery care: case study of Kassena-Nankana district of northern Ghana.

    Directory of Open Access Journals (Sweden)

    Maxwell Ayindenaba Dalaba

    Full Text Available This study analyzed cost of implementing computer-assisted Clinical Decision Support System (CDSS in selected health care centres in Ghana.A descriptive cross sectional study was conducted in the Kassena-Nankana district (KND. CDSS was deployed in selected health centres in KND as an intervention to manage patients attending antenatal clinics and the labour ward. The CDSS users were mainly nurses who were trained. Activities and associated costs involved in the implementation of CDSS (pre-intervention and intervention were collected for the period between 2009-2013 from the provider perspective. The ingredients approach was used for the cost analysis. Costs were grouped into personnel, trainings, overheads (recurrent costs and equipment costs (capital cost. We calculated cost without annualizing capital cost to represent financial cost and cost with annualizing capital costs to represent economic cost.Twenty-two trained CDSS users (at least 2 users per health centre participated in the study. Between April 2012 and March 2013, users managed 5,595 antenatal clients and 872 labour clients using the CDSS. We observed a decrease in the proportion of complications during delivery (pre-intervention 10.74% versus post-intervention 9.64% and a reduction in the number of maternal deaths (pre-intervention 4 deaths versus post-intervention 1 death. The overall financial cost of CDSS implementation was US$23,316, approximately US$1,060 per CDSS user trained. Of the total cost of implementation, 48% (US$11,272 was pre-intervention cost and intervention cost was 52% (US$12,044. Equipment costs accounted for the largest proportion of financial cost: 34% (US$7,917. When economic cost was considered, total cost of implementation was US$17,128-lower than the financial cost by 26.5%.The study provides useful information in the implementation of CDSS at health facilities to enhance health workers' adherence to practice guidelines and taking accurate decisions to

  20. Costs associated with implementation of computer-assisted clinical decision support system for antenatal and delivery care: case study of Kassena-Nankana district of northern Ghana.

    Science.gov (United States)

    Dalaba, Maxwell Ayindenaba; Akweongo, Patricia; Williams, John; Saronga, Happiness Pius; Tonchev, Pencho; Sauerborn, Rainer; Mensah, Nathan; Blank, Antje; Kaltschmidt, Jens; Loukanova, Svetla

    2014-01-01

    This study analyzed cost of implementing computer-assisted Clinical Decision Support System (CDSS) in selected health care centres in Ghana. A descriptive cross sectional study was conducted in the Kassena-Nankana district (KND). CDSS was deployed in selected health centres in KND as an intervention to manage patients attending antenatal clinics and the labour ward. The CDSS users were mainly nurses who were trained. Activities and associated costs involved in the implementation of CDSS (pre-intervention and intervention) were collected for the period between 2009-2013 from the provider perspective. The ingredients approach was used for the cost analysis. Costs were grouped into personnel, trainings, overheads (recurrent costs) and equipment costs (capital cost). We calculated cost without annualizing capital cost to represent financial cost and cost with annualizing capital costs to represent economic cost. Twenty-two trained CDSS users (at least 2 users per health centre) participated in the study. Between April 2012 and March 2013, users managed 5,595 antenatal clients and 872 labour clients using the CDSS. We observed a decrease in the proportion of complications during delivery (pre-intervention 10.74% versus post-intervention 9.64%) and a reduction in the number of maternal deaths (pre-intervention 4 deaths versus post-intervention 1 death). The overall financial cost of CDSS implementation was US$23,316, approximately US$1,060 per CDSS user trained. Of the total cost of implementation, 48% (US$11,272) was pre-intervention cost and intervention cost was 52% (US$12,044). Equipment costs accounted for the largest proportion of financial cost: 34% (US$7,917). When economic cost was considered, total cost of implementation was US$17,128-lower than the financial cost by 26.5%. The study provides useful information in the implementation of CDSS at health facilities to enhance health workers' adherence to practice guidelines and taking accurate decisions to improve

  1. Four Principles for User Interface Design of Computerised Clinical Decision Support Systems

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Christiansen, Marion Berg; Nøhr, Christian

    2011-01-01

    emphasises a focus on how users interact with the system, a focus on how information is provided by the system, and four principles of interaction. The four principles for design of user interfaces for CDSS are summarised as four A’s: All in one, At a glance, At hand and Attention. It is recommended that all...... four interaction principles are integrated in the design of user interfaces for CDSS, i.e. the model is an integrated model which we suggest as a guide for interaction design when working with preventing medication errors....

  2. Impact on process results of clinical decision support systems (CDSSs) applied to medication use: overview of systematic reviews.

    Science.gov (United States)

    Reis, Wálleri C; Bonetti, Aline F; Bottacin, Wallace E; Reis, Alcindo S; Souza, Thaís T; Pontarolo, Roberto; Correr, Cassyano J; Fernandez-Llimos, Fernando

    2017-01-01

    The purpose of this overview (systematic review of systematic reviews) is to evaluate the impact of clinical decision support systems (CDSS) applied to medication use in the care process. A search for systematic reviews that address CDSS was performed on Medline following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and Cochrane recommendations. Terms related to CDSS and systematic reviews were used in combination with Boolean operators and search field tags to build the electronic search strategy. There was no limitation of date or language for inclusion. We included revisions that investigated, as a main or secondary objective, changes in process outcomes. The Revised Assessment of Multiple Systematic Reviews (R-AMSTAR) score was used to evaluate the quality of the studies. The search retrieved 954 articles. Five articles were added through manual search, totaling an initial sample of 959 articles. After screening and reading in full, 44 systematic reviews met the inclusion criteria. In the medication-use processes where CDSS was used, the most common stages were prescribing (n=38 (86.36%) and administering (n=12 (27.27%)). Most of the systematic reviews demonstrated improvement in the health care process (30/44 - 68.2%). The main positive results were related to improvement of the quality of prescription by the physicians (14/30 - 46.6%) and reduction of errors in prescribing (5/30 - 16.6%). However, the quality of the studies was poor, according to the score used. CDSSs represent a promising technology to optimize the medication-use process, especially related to improvement in the quality of prescriptions and reduction of prescribing errors, although higher quality studies are needed to establish the predictors of success in these systems.

  3. Evaluation of user interface and workflow design of a bedside nursing clinical decision support system.

    Science.gov (United States)

    Yuan, Michael Juntao; Finley, George Mike; Long, Ju; Mills, Christy; Johnson, Ron Kim

    2013-01-31

    Clinical decision support systems (CDSS) are important tools to improve health care outcomes and reduce preventable medical adverse events. However, the effectiveness and success of CDSS depend on their implementation context and usability in complex health care settings. As a result, usability design and validation, especially in real world clinical settings, are crucial aspects of successful CDSS implementations. Our objective was to develop a novel CDSS to help frontline nurses better manage critical symptom changes in hospitalized patients, hence reducing preventable failure to rescue cases. A robust user interface and implementation strategy that fit into existing workflows was key for the success of the CDSS. Guided by a formal usability evaluation framework, UFuRT (user, function, representation, and task analysis), we developed a high-level specification of the product that captures key usability requirements and is flexible to implement. We interviewed users of the proposed CDSS to identify requirements, listed functions, and operations the system must perform. We then designed visual and workflow representations of the product to perform the operations. The user interface and workflow design were evaluated via heuristic and end user performance evaluation. The heuristic evaluation was done after the first prototype, and its results were incorporated into the product before the end user evaluation was conducted. First, we recruited 4 evaluators with strong domain expertise to study the initial prototype. Heuristic violations were coded and rated for severity. Second, after development of the system, we assembled a panel of nurses, consisting of 3 licensed vocational nurses and 7 registered nurses, to evaluate the user interface and workflow via simulated use cases. We recorded whether each session was successfully completed and its completion time. Each nurse was asked to use the National Aeronautics and Space Administration (NASA) Task Load Index to self

  4. Barriers to implementation of a computerized decision support system for depression: an observational report on lessons learned in "real world" clinical settings

    Directory of Open Access Journals (Sweden)

    Sunderajan Prabha

    2009-01-01

    Full Text Available Abstract Background Despite wide promotion, clinical practice guidelines have had limited effect in changing physician behavior. Effective implementation strategies to date have included: multifaceted interventions involving audit and feedback, local consensus processes, marketing; reminder systems, either manual or computerized; and interactive educational meetings. In addition, there is now growing evidence that contextual factors affecting implementation must be addressed such as organizational support (leadership procedures and resources for the change and strategies to implement and maintain new systems. Methods To examine the feasibility and effectiveness of implementation of a computerized decision support system for depression (CDSS-D in routine public mental health care in Texas, fifteen study clinicians (thirteen physicians and two advanced nurse practitioners participated across five sites, accruing over 300 outpatient visits on 168 patients. Results Issues regarding computer literacy and hardware/software requirements were identified as initial barriers. Clinicians also reported concerns about negative impact on workflow and the potential need for duplication during the transition from paper to electronic systems of medical record keeping. Conclusion The following narrative report based on observations obtained during the initial testing and use of a CDSS-D in clinical settings further emphasizes the importance of taking into account organizational factors when planning implementation of evidence-based guidelines or decision support within a system.

  5. Evaluation of a clinical decision support algorithm for patient-specific childhood immunization.

    Science.gov (United States)

    Zhu, Vivienne J; Grannis, Shaun J; Tu, Wanzhu; Rosenman, Marc B; Downs, Stephen M

    2012-09-01

    To evaluate the effectiveness of a clinical decision support system (CDSS) implementing standard childhood immunization guidelines, using real-world patient data from the Regenstrief Medical Record System (RMRS). Study subjects were age 6-years or younger in 2008 and had visited the pediatric clinic on the campus of Wishard Memorial Hospital. Immunization records were retrieved from the RMRS for 135 randomly selected pediatric patients. We compared vaccine recommendations from the CDSS for both eligible and recommended timelines, based on the child's date of birth and vaccine history, to recommendations from registered nurses who routinely selected vaccines for administration in a busy inner city hospital, using the same date of birth and vaccine history. Aggregated and stratified agreement and Kappa statistics were reported. The reasons for disagreement between suggestions from the CDSS and nurses were also identified. For the 135 children, a total of 1215 vaccination suggestions were generated by nurses and were compared to the recommendations of the CDSS. The overall agreement rates were 81.3% and 90.6% for the eligible and recommended timelines, respectively. The overall Kappa values were 0.63 for the eligible timeline and 0.80 for the recommended timeline. Common reasons for disagreement between the CDSS and nurses were: (1) missed vaccination opportunities by nurses, (2) nurses sometimes suggested a vaccination before the minimal age and minimal waiting interval, (3) nurses usually did not validate patient immunization history, and (4) nurses sometimes gave an extra vaccine dose. Our childhood immunization CDSS can assist providers in delivering accurate childhood vaccinations. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Computerized Clinical Decision Support: Contributions from 2015

    Science.gov (United States)

    Bouaud, J.

    2016-01-01

    Summary Objective To summarize recent research and select the best papers published in 2015 in the field of computerized clinical decision support for the Decision Support section of the IMIA yearbook. Method A literature review was performed by searching two bibliographic databases for papers related to clinical decision support systems (CDSSs) and computerized provider order entry (CPOE) systems. The aim was to identify a list of candidate best papers from the retrieved papers that were then peer-reviewed by external reviewers. A consensus meeting between the two section editors and the IMIA editorial team was finally conducted to conclude in the best paper selection. Results Among the 974 retrieved papers, the entire review process resulted in the selection of four best papers. One paper reports on a CDSS routinely applied in pediatrics for more than 10 years, relying on adaptations of the Arden Syntax. Another paper assessed the acceptability and feasibility of an important CPOE evaluation tool in hospitals outside the US where it was developed. The third paper is a systematic, qualitative review, concerning usability flaws of medication-related alerting functions, providing an important evidence-based, methodological contribution in the domain of CDSS design and development in general. Lastly, the fourth paper describes a study quantifying the effect of a complex, continuous-care, guideline-based CDSS on the correctness and completeness of clinicians’ decisions. Conclusions While there are notable examples of routinely used decision support systems, this 2015 review on CDSSs and CPOE systems still shows that, despite methodological contributions, theoretical frameworks, and prototype developments, these technologies are not yet widely spread (at least with their full functionalities) in routine clinical practice. Further research, testing, evaluation, and training are still needed for these tools to be adopted in clinical practice and, ultimately, illustrate

  7. Interface, information, interaction: a narrative review of design and functional requirements for clinical decision support.

    Science.gov (United States)

    Miller, Kristen; Mosby, Danielle; Capan, Muge; Kowalski, Rebecca; Ratwani, Raj; Noaiseh, Yaman; Kraft, Rachel; Schwartz, Sanford; Weintraub, William S; Arnold, Ryan

    2018-05-01

    Provider acceptance and associated patient outcomes are widely discussed in the evaluation of clinical decision support systems (CDSSs), but critical design criteria for tools have generally been overlooked. The objective of this work is to inform electronic health record alert optimization and clinical practice workflow by identifying, compiling, and reporting design recommendations for CDSS to support the efficient, effective, and timely delivery of high-quality care. A narrative review was conducted from 2000 to 2016 in PubMed and The Journal of Human Factors and Ergonomics Society to identify papers that discussed/recommended design features of CDSSs that are associated with the success of these systems. Fourteen papers were included as meeting the criteria and were found to have a total of 42 unique recommendations; 11 were classified as interface features, 10 as information features, and 21 as interaction features. Features are defined and described, providing actionable guidance that can be applied to CDSS development and policy. To our knowledge, no reviews have been completed that discuss/recommend design features of CDSS at this scale, and thus we found that this was important for the body of literature. The recommendations identified in this narrative review will help to optimize design, organization, management, presentation, and utilization of information through presentation, content, and function. The designation of 3 categories (interface, information, and interaction) should be further evaluated to determine the critical importance of the categories. Future work will determine how to prioritize them with limited resources for designers and developers in order to maximize the clinical utility of CDSS. This review will expand the field of knowledge and provide a novel organization structure to identify key recommendations for CDSS.

  8. SMARTHealth India: Development and Field Evaluation of a Mobile Clinical Decision Support System for Cardiovascular Diseases in Rural India.

    Science.gov (United States)

    Praveen, Devarsetty; Patel, Anushka; Raghu, Arvind; Clifford, Gari D; Maulik, Pallab K; Mohammad Abdul, Ameer; Mogulluru, Kishor; Tarassenko, Lionel; MacMahon, Stephen; Peiris, David

    2014-12-08

    Cardiovascular disease (CVD) is the major cause of premature death and disability in India and yet few people at risk of CVD are able to access best practice health care. Mobile health (mHealth) is a promising solution, but very few mHealth interventions have been subjected to robust evaluation in India. The objectives were to develop a multifaceted, mobile clinical decision support system (CDSS) for CVD management and evaluate it for use by public nonphysician health care workers (NPHWs) and physicians in a rural Indian setting. Plain language clinical rules were developed based on standard guidelines and programmed into a computer tablet app. The algorithm was validated and field-tested in 11 villages in Andhra Pradesh, involving 11 NPHWs and 3 primary health center (PHC) physicians. A mixed method evaluation was conducted comprising clinical and survey data and in-depth patient and staff interviews to understand barriers and enablers to the use of the system. Then this was thematically analyzed using NVivo 10. During validation of the algorithm, there was an initial agreement for 70% of the 42 calculated variables between the CDSS and SPSS software outputs. Discrepancies were identified and amendments were made until perfect agreement was achieved. During field testing, NPHWs and PHC physicians used the CDSS to screen 227 and 65 adults, respectively. The NPHWs identified 39% (88/227) of patients for referral with 78% (69/88) of these having a definite indication for blood pressure (BP)-lowering medication. However, only 35% (24/69) attended a clinic within 1 month of referral, with 42% (10/24) of these reporting continuing medications at 3-month follow-up. Physicians identified and recommended 17% (11/65) of patients for BP-lowering medications. Qualitative interviews identified 3 interrelated interview themes: (1) the CDSS had potential to change prevailing health care models, (2) task-shifting to NPHWs was the central driver of change, and (3) despite high

  9. A review of randomized controlled trials of medical record powered clinical decision support system to improve quality of diabetes care.

    Science.gov (United States)

    Ali, Syed Mustafa; Giordano, Richard; Lakhani, Saima; Walker, Dawn Marie

    2016-03-01

    A gap between current diabetes care practice and recommended diabetes care standards has consistently been reported in the literature. Many IT-based interventions have been developed to improve adherence to the quality of care standards for chronic illness like diabetes. The widespread implementation of electronic medical/health records has catalyzed clinical decision support systems (CDSS) which may improve the quality of diabetes care. Therefore, the objective of the review is to evaluate the effectiveness of CDSS in improving quality of type II diabetes care. Moreover, the review aims to highlight the key indicators of quality improvement to assist policy makers in development of future diabetes care policies through the integration of information technology and system. Setting inclusion criteria, a systematic literature search was conducted using Medline, Web of Science and Science Direct. Critical Appraisal Skills Programme (CASP) tools were used to evaluate the quality of studies. Eight randomized controlled trials (RCTs) were selected for the review. In the selected studies, seventeen clinical markers of diabetes care were discussed. Three quality of care indicators were given more importance in monitoring the progress of diabetes care, which is consistent with National Institute for Health and Care Excellence (NICE) guidelines. The presence of these indicators in the studies helped to determine which studies were selected for review. Clinical- and process-related improvements are compared between intervention group using CDSS and control group with usual care. Glycated hemoglobin (HbA1c), low density lipid cholesterol (LDL-C) and blood pressure (BP) were the quality of care indicators studied at the levels of process of care and clinical outcome. The review has found both inconsistent and variable results for quality of diabetes care measures. A significant improvement has been found in the process of care for all three measures of quality of diabetes care

  10. Clinical Decision Support Knowledge Management: Strategies for Success.

    Science.gov (United States)

    Khalifa, Mohamed; Alswailem, Osama

    2015-01-01

    Clinical Decision Support Systems have been shown to increase quality of care, patient safety, improve adherence to guidelines for prevention and treatment, and avoid medication errors. Such systems depend mainly on two types of content; the clinical information related to patients and the medical knowledge related to the specialty that informs the system rules and alerts. At King Faisal Specialist Hospital and Research Center, Saudi Arabia, the Health Information Technology Affairs worked on identifying best strategies and recommendations for successful CDSS knowledge management. A review of literature was conducted to identify main areas of challenges and factors of success. A qualitative survey was used over six months' duration to collect opinions, experiences and suggestions from both IT and healthcare professionals. Recommendations were categorized into ten main topics that should be addressed during the development and implementation of CDSS knowledge management tools in the hospital.

  11. Improving antibiotic prescribing for adults with community acquired pneumonia: Does a computerised decision support system achieve more than academic detailing alone? – a time series analysis

    Directory of Open Access Journals (Sweden)

    Black James F

    2008-07-01

    Full Text Available Abstract Background The ideal method to encourage uptake of clinical guidelines in hospitals is not known. Several strategies have been suggested. This study evaluates the impact of academic detailing and a computerised decision support system (CDSS on clinicians' prescribing behaviour for patients with community acquired pneumonia (CAP. Methods The management of all patients presenting to the emergency department over three successive time periods was evaluated; the baseline, academic detailing and CDSS periods. The rate of empiric antibiotic prescribing that was concordant with recommendations was studied over time comparing pre and post periods and using an interrupted time series analysis. Results The odds ratio for concordant therapy in the academic detailing period, after adjustment for age, illness severity and suspicion of aspiration, compared with the baseline period was OR = 2.79 [1.88, 4.14], p Conclusion Deployment of a computerised decision support system was associated with an early improvement in antibiotic prescribing practices which was greater than the changes seen with academic detailing. The sustainability of this intervention requires further evaluation.

  12. What hinders the uptake of computerized decision support systems in hospitals? A qualitative study and framework for implementation.

    Science.gov (United States)

    Liberati, Elisa G; Ruggiero, Francesca; Galuppo, Laura; Gorli, Mara; González-Lorenzo, Marien; Maraldi, Marco; Ruggieri, Pietro; Polo Friz, Hernan; Scaratti, Giuseppe; Kwag, Koren H; Vespignani, Roberto; Moja, Lorenzo

    2017-09-15

    Advanced Computerized Decision Support Systems (CDSSs) assist clinicians in their decision-making process, generating recommendations based on up-to-date scientific evidence. Although this technology has the potential to improve the quality of patient care, its mere provision does not guarantee uptake: even where CDSSs are available, clinicians often fail to adopt their recommendations. This study examines the barriers and facilitators to the uptake of an evidence-based CDSS as perceived by diverse health professionals in hospitals at different stages of CDSS adoption. Qualitative study conducted as part of a series of randomized controlled trials of CDSSs. The sample includes two hospitals using a CDSS and two hospitals that aim to adopt a CDSS in the future. We interviewed physicians, nurses, information technology staff, and members of the boards of directors (n = 30). We used a constant comparative approach to develop a framework for guiding implementation. We identified six clusters of experiences of, and attitudes towards CDSSs, which we label as "positions." The six positions represent a gradient of acquisition of control over CDSSs (from low to high) and are characterized by different types of barriers to CDSS uptake. The most severe barriers (prevalent in the first positions) include clinicians' perception that the CDSSs may reduce their professional autonomy or may be used against them in the event of medical-legal controversies. Moving towards the last positions, these barriers are substituted by technical and usability problems related to the technology interface. When all barriers are overcome, CDSSs are perceived as a working tool at the service of its users, integrating clinicians' reasoning and fostering organizational learning. Barriers and facilitators to the use of CDSSs are dynamic and may exist prior to their introduction in clinical contexts; providing a static list of obstacles and facilitators, irrespective of the specific implementation

  13. "Quality of prenatal and maternal care: bridging the know-do gap" (QUALMAT study): an electronic clinical decision support system for rural Sub-Saharan Africa.

    Science.gov (United States)

    Blank, Antje; Prytherch, Helen; Kaltschmidt, Jens; Krings, Andreas; Sukums, Felix; Mensah, Nathan; Zakane, Alphonse; Loukanova, Svetla; Gustafsson, Lars L; Sauerborn, Rainer; Haefeli, Walter E

    2013-04-10

    Despite strong efforts to improve maternal care, its quality remains deficient in many countries of Sub-Saharan Africa as persistently high maternal mortality rates testify. The QUALMAT study seeks to improve the performance and motivation of rural health workers and ultimately quality of primary maternal health care services in three African countries Burkina Faso, Ghana, and Tanzania. One major intervention is the introduction of a computerized Clinical Decision Support System (CDSS) for rural primary health care centers to be used by health care workers of different educational levels. A stand-alone, java-based software, able to run on any standard hardware, was developed based on assessment of the health care situation in the involved countries. The software scope was defined and the final software was programmed under consideration of test experiences. Knowledge for the decision support derived from the World Health Organization (WHO) guideline "Pregnancy, Childbirth, Postpartum and Newborn Care; A Guide for Essential Practice". The QUALMAT CDSS provides computerized guidance and clinical decision support for antenatal care, and care during delivery and up to 24 hours post delivery. The decision support is based on WHO guidelines and designed using three principles: (1) Guidance through routine actions in maternal and perinatal care, (2) integration of clinical data to detect situations of concern by algorithms, and (3) electronic tracking of peri- and postnatal activities. In addition, the tool facilitates patient management and is a source of training material. The implementation of the software, which is embedded in a set of interventions comprising the QUALMAT study, is subject to various research projects assessing and quantifying the impact of the CDSS on quality of care, the motivation of health care staff (users) and its health economic aspects. The software will also be assessed for its usability and acceptance, as well as for its influence on

  14. Interoperability of clinical decision-support systems and electronic health records using archetypes: a case study in clinical trial eligibility.

    Science.gov (United States)

    Marcos, Mar; Maldonado, Jose A; Martínez-Salvador, Begoña; Boscá, Diego; Robles, Montserrat

    2013-08-01

    Clinical decision-support systems (CDSSs) comprise systems as diverse as sophisticated platforms to store and manage clinical data, tools to alert clinicians of problematic situations, or decision-making tools to assist clinicians. Irrespective of the kind of decision-support task CDSSs should be smoothly integrated within the clinical information system, interacting with other components, in particular with the electronic health record (EHR). However, despite decades of developments, most CDSSs lack interoperability features. We deal with the interoperability problem of CDSSs and EHRs by exploiting the dual-model methodology. This methodology distinguishes a reference model and archetypes. A reference model is represented by a stable and small object-oriented model that describes the generic properties of health record information. For their part, archetypes are reusable and domain-specific definitions of clinical concepts in the form of structured and constrained combinations of the entities of the reference model. We rely on archetypes to make the CDSS compatible with EHRs from different institutions. Concretely, we use archetypes for modelling the clinical concepts that the CDSS requires, in conjunction with a series of knowledge-intensive mappings relating the archetypes to the data sources (EHR and/or other archetypes) they depend on. We introduce a comprehensive approach, including a set of tools as well as methodological guidelines, to deal with the interoperability of CDSSs and EHRs based on archetypes. Archetypes are used to build a conceptual layer of the kind of a virtual health record (VHR) over the EHR whose contents need to be integrated and used in the CDSS, associating them with structural and terminology-based semantics. Subsequently, the archetypes are mapped to the EHR by means of an expressive mapping language and specific-purpose tools. We also describe a case study where the tools and methodology have been employed in a CDSS to support

  15. Computer Decision Support to Improve Autism Screening and Care in Community Pediatric Clinics

    Science.gov (United States)

    Bauer, Nerissa S.; Sturm, Lynne A.; Carroll, Aaron E.; Downs, Stephen M.

    2013-01-01

    An autism module was added to an existing computer decision support system (CDSS) to facilitate adherence to recommended guidelines for screening for autism spectrum disorders in primary care pediatric clinics. User satisfaction was assessed by survey and informal feedback at monthly meetings between clinical staff and the software team. To assess…

  16. The impact of using computer decision-support software in primary care nurse-led telephone triage: interactional dilemmas and conversational consequences.

    Science.gov (United States)

    Murdoch, Jamie; Barnes, Rebecca; Pooler, Jillian; Lattimer, Valerie; Fletcher, Emily; Campbell, John L

    2015-02-01

    Telephone triage represents one strategy to manage demand for face-to-face GP appointments in primary care. Although computer decision-support software (CDSS) is increasingly used by nurses to triage patients, little is understood about how interaction is organized in this setting. Specifically any interactional dilemmas this computer-mediated setting invokes; and how these may be consequential for communication with patients. Using conversation analytic methods we undertook a multi-modal analysis of 22 audio-recorded telephone triage nurse-caller interactions from one GP practice in England, including 10 video-recordings of nurses' use of CDSS during triage. We draw on Goffman's theoretical notion of participation frameworks to make sense of these interactions, presenting 'telling cases' of interactional dilemmas nurses faced in meeting patient's needs and accurately documenting the patient's condition within the CDSS. Our findings highlight troubles in the 'interactional workability' of telephone triage exposing difficulties faced in aligning the proximal and wider distal context that structures CDSS-mediated interactions. Patients present with diverse symptoms, understanding of triage consultations, and communication skills which nurses need to negotiate turn-by-turn with CDSS requirements. Nurses therefore need to have sophisticated communication, technological and clinical skills to ensure patients' presenting problems are accurately captured within the CDSS to determine safe triage outcomes. Dilemmas around how nurses manage and record information, and the issues of professional accountability that may ensue, raise questions about the impact of CDSS and its use in supporting nurses to deliver safe and effective patient care. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Evaluation of real-time clinical decision support systems for platelet and cryoprecipitate orders.

    Science.gov (United States)

    Collins, Ryan A; Triulzi, Darrell J; Waters, Jonathan H; Reddy, Vivek; Yazer, Mark H

    2014-01-01

    To evaluate cryoprecipitate and platelet ordering practices after the implementation of real-time clinical decision support systems (CDSSs) in a computerized physician order entry (CPOE) system. Uniform platelet and cryoprecipitate transfusion thresholds were implemented at 11 hospitals in a regional health care system with a common CPOE system. Over 6 months, a variety of information was collected on the ordering physicians and the number of alerts generated by the CDSSs when these products were ordered outside of the institutional guidelines. There were 1,889 orders for platelets and 152 orders for cryoprecipitate placed in 6 months. Of these, 1,102 (58.3%) platelet and 74 (48.7%) cryoprecipitate orders triggered an alert. The proportion of orders canceled after an alert was generated ranged from 13.5% to 17.9% for platelets and 0% to 50.0% for cryoprecipitate orders. CDSS alerts reduce, but do not eliminate, platelet and cryoprecipitate transfusions that do not meet institutional guidelines.

  18. Usability of clinical decision support system as a facilitator for learning the assistive technology adaptation process.

    Science.gov (United States)

    Danial-Saad, Alexandra; Kuflik, Tsvi; Weiss, Patrice L Tamar; Schreuer, Naomi

    2016-01-01

    The aim of this study was to evaluate the usability of Ontology Supported Computerized Assistive Technology Recommender (OSCAR), a Clinical Decision Support System (CDSS) for the assistive technology adaptation process, its impact on learning the matching process, and to determine the relationship between its usability and learnability. Two groups of expert and novice clinicians (total, n = 26) took part in this study. Each group filled out system usability scale (SUS) to evaluate OSCAR's usability. The novice group completed a learning questionnaire to assess OSCAR's effect on their ability to learn the matching process. Both groups rated OSCAR's usability as "very good", (M [SUS] = 80.7, SD = 11.6, median = 83.7) by the novices, and (M [SUS] = 81.2, SD = 6.8, median = 81.2) by the experts. The Mann-Whitney results indicated that no significant differences were found between the expert and novice groups in terms of OSCAR's usability. A significant positive correlation existed between the usability of OSCAR and the ability to learn the adaptation process (rs = 0.46, p = 0.04). Usability is an important factor in the acceptance of a system. The successful application of user-centered design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically in developing other systems. Implications for Rehabilitation Creating a CDSS with a focus on its usability is an important factor for its acceptance by its users. Successful usability outcomes can impact the learning process of the subject matter in general, and the AT prescription process in particular. The successful application of User-Centered Design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically. The study emphasizes the importance of close collaboration between the developers and

  19. The limitations of using the existing TAM in adoption of clinical decision support system in hospitals: An empirical study in Malaysia

    Directory of Open Access Journals (Sweden)

    Pouyan Esmaeilzadeh

    2014-04-01

    Full Text Available The technology acceptance model (TAM has been widely used to study user acceptance of new computer technologies. Previous studies claimed that future technology acceptance research should explore other additional explanatory variables, which may affect the originally proposed constructs of the TAM. The use of information technology in the health care sector and especially in hospitals offers great potential for improving the performance of physicians, increasing the quality of services and also reducing the organizational expenses. However, the main challenge that arises according to the literature is whether healthcare professionals are willing to adopt and use clinical information technology while performing their tasks. Although adoption of various information technologies has been studied using the technology acceptance model (TAM, the study of technology acceptance for professional groups (such as physicians has been limited. Physician adoption of clinical information technology is important for its successful implementation. Therefore, the purpose of this study is to gain a better insight about factors affecting physicians’ acceptance of clinical decision support systems (CDSS in a hospital setting. The results reflect the importance of perceived threat to professional autonomy, perceived interactivity with clinical IT, perceived usefulness and perceived ease of use in determining physicians’ intention to use CDSS.

  20. A clinical decision support system algorithm for intravenous to oral antibiotic switch therapy: validity, clinical relevance and usefulness in a three-step evaluation study.

    Science.gov (United States)

    Akhloufi, H; Hulscher, M; van der Hoeven, C P; Prins, J M; van der Sijs, H; Melles, D C; Verbon, A

    2018-04-26

    To evaluate a clinical decision support system (CDSS) based on consensus-based intravenous to oral switch criteria, which identifies intravenous to oral switch candidates. A three-step evaluation study of a stand-alone CDSS with electronic health record interoperability was performed at the Erasmus University Medical Centre in the Netherlands. During the first step, we performed a technical validation. During the second step, we determined the sensitivity, specificity, negative predictive value and positive predictive value in a retrospective cohort of all hospitalized adult patients starting at least one therapeutic antibacterial drug between 1 and 16 May 2013. ICU, paediatric and psychiatric wards were excluded. During the last step the clinical relevance and usefulness was prospectively assessed by reports to infectious disease specialists. An alert was considered clinically relevant if antibiotics could be discontinued or switched to oral therapy at the time of the alert. During the first step, one technical error was found. The second step yielded a positive predictive value of 76.6% and a negative predictive value of 99.1%. The third step showed that alerts were clinically relevant in 53.5% of patients. For 43.4% it had already been decided to discontinue or switch the intravenous antibiotics by the treating physician. In 10.1%, the alert resulted in advice to change antibiotic policy and was considered useful. This prospective cohort study shows that the alerts were clinically relevant in >50% (n = 449) and useful in 10% (n = 85). The CDSS needs to be evaluated in hospitals with varying activity of infectious disease consultancy services as this probably influences usefulness.

  1. Development of a Web-Based Clinical Decision Support System for Drug Prescription: Non-Interventional Naturalistic Description of the Antipsychotic Prescription Patterns in 4345 Outpatients and Future Applications.

    Science.gov (United States)

    Berrouiguet, Sofian; Barrigón, Maria Luisa; Brandt, Sara A; Ovejero-García, Santiago; Álvarez-García, Raquel; Carballo, Juan Jose; Lenca, Philippe; Courtet, Philippe; Baca-García, Enrique

    2016-01-01

    The emergence of electronic prescribing devices with clinical decision support systems (CDSS) is able to significantly improve management pharmacological treatments. We developed a web application available on smartphones in order to help clinicians monitor prescription and further propose CDSS. A web application (www.MEmind.net) was developed to assess patients and collect data regarding gender, age, diagnosis and treatment. We analyzed antipsychotic prescriptions in 4345 patients attended in five Psychiatric Community Mental Health Centers from June 2014 to October 2014. The web-application reported average daily dose prescribed for antipsychotics, prescribed daily dose (PDD), and the PDD to defined daily dose (DDD) ratio. The MEmind web-application reported that antipsychotics were used in 1116 patients out of the total sample, mostly in 486 (44%) patients with schizophrenia related disorders but also in other diagnoses. Second generation antipsychotics (quetiapine, aripiprazole and long-acting paliperidone) were preferably employed. Low doses were more frequently used than high doses. Long acting paliperidone and ziprasidone however, were the only two antipsychotics used at excessive dosing. Antipsychotic polypharmacy was used in 287 (26%) patients with classic depot drugs, clotiapine, amisulpride and clozapine. In this study we describe the first step of the development of a web application that is able to make polypharmacy, high dose usage and off label usage of antipsychotics visible to clinicians. Current development of the MEmind web application may help to improve prescription security via momentary feedback of prescription and clinical decision support system.

  2. Developing Mobile Clinical Decision Support for Nursing Home Staff Assessment of Urinary Tract Infection using Goal-Directed Design.

    Science.gov (United States)

    Jones, Wallace; Drake, Cynthia; Mack, David; Reeder, Blaine; Trautner, Barbara; Wald, Heidi

    2017-06-20

    Unique characteristics of nursing homes (NHs) contribute to high rates of inappropriate antibiotic use for asymptomatic bacteriuria (ASB), a benign condition. A mobile clinical decision support system (CDSS) may support NH staff in differentiating urinary tract infections (UTI) from ASB and reducing antibiotic days. We used Goal-Directed Design to: 1) Characterize information needs for UTI identification and management in NHs; 2) Develop UTI Decide, a mobile CDSS prototype informed by personas and scenarios of use constructed from Aim 1 findings; 3) Evaluate the UTI Decide prototype with NH staff. Focus groups were conducted with providers and nurses in NHs in Denver, Colorado (n= 24). Qualitative descriptive analysis was applied to focus group transcripts to identify information needs and themes related to mobile clinical decision support for UTI identification and management. Personas representing typical end users were developed; typical clinical context scenarios were constructed using information needs as goals. Usability testing was performed using cognitive walk-throughs and a think-aloud protocol. Four information needs were identified including guidance regarding resident assessment; communication with providers; care planning; and urine culture interpretation. Design of a web-based application incorporating a published decision support algorithm for evidence-based UTI diagnoses proceeded with a focus on nursing information needs during resident assessment and communication with providers. Certified nursing assistant (CNA) and registered nurse (RN) personas were constructed in 4 context scenarios with associated key path scenarios. After field testing, a high fidelity prototype of UTI Decide was completed and evaluated by potential end users. Design recommendations and content recommendations were elicited. Goal-Directed Design informed the development of a mobile CDSS supporting participant-identified information needs for UTI assessment and communication

  3. Hardwiring patient blood management: harnessing information technology to optimize transfusion practice.

    Science.gov (United States)

    Dunbar, Nancy M; Szczepiorkowski, Zbigniew M

    2014-11-01

    This review will describe recent applications of computerized provider order entry (CPOE) with clinical decision support systems (CDSS) in transfusion medicine and other novel ways information technology is being applied to support patient blood management (PBM) efforts. CPOE with CDSS can be used to encourage appropriate transfusion practices as part of an institutional PBM program. The impact of CPOE with CDSS is enhanced when the laboratory information system (LIS) can be linked to the electronic medical record (EMR) to enable adaptive alerts that query transfusion orders against current laboratory and/or clinical data to ensure provider ordering practice is consistent with institutional guidelines. Additional current applications of healthcare information technology to transfusion medicine include creation of electronic reports to support order auditing, assessment of blood product utilization and compliance monitoring. Application of healthcare information technology to transfusion medicine will expand, as more institutions embrace PBM and utilize their EMR and LIS to 'hardwire' appropriate transfusion practice. The impact of implementation of CPOE with CDSS is variable and influenced by multiple factors including existing practice patterns, provider receptiveness and system configuration.

  4. Identification of drug-related problems by a clinical pharmacist in addition to computerized alerts

    NARCIS (Netherlands)

    Zaal, R.J.; Jansen, M.; Duisenberg-van Essenberg, M.; C.C., Tijssen; Roukema, J.A.; van den Bemt, P.M.

    2013-01-01

    Background Both clinical pharmacists and computerized physician order entry systems with clinical decision support (CPOE/CDSS) can reduce drug-related problems (DRPs). However, the contribution of a clinical pharmacist in addition to CPOE/CDSS has not been established in a prospective study.

  5. Identification of drug-related problems by a clinical pharmacist in addition to computerized alerts

    NARCIS (Netherlands)

    R.J. Zaal (Rianne); M.M.P.M. Jansen (Mark M. P.); M. Duisenberg-Van Essenberg (Marjolijn); C.C. Tijssen (Cees); J.A. Roukema; P.M.L.A. van den Bemt (Patricia)

    2013-01-01

    textabstractBackground Both clinical pharmacists and computerized physician order entry systems with clinical decision support (CPOE/CDSS) can reduce drug-related problems (DRPs). However, the contribution of a clinical pharmacist in addition to CPOE/CDSS has not been established in a prospective

  6. DEEP HST /STIS VISIBLE-LIGHT IMAGING OF DEBRIS SYSTEMS AROUND SOLAR ANALOG HOSTS

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Glenn; Gaspar, Andras [Steward Observatory and the Department of Astronomy, The University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States); Grady, Carol A. [Eureka Scientific, 2452 Delmer, Suite 100, Oakland, CA 96002 (United States); Stark, Christopher C.; Kuchner, Marc J. [NASA/Goddard Space Flight Center, Exoplanets and Stellar Astrophysics Laboratory, Code 667, Greenbelt, MD 20771 (United States); Carson, Joseph [Department of Physics and Astronomy, College of Charleston, 66 George Street, Charleston, SC 29424 (United States); Debes, John H.; Hines, Dean C.; Perrin, Marshall [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Henning, Thomas [Max-Planck-Institut für Astronomie, Königstuhl 17, D-69117, Heidelberg (Germany); Jang-Condell, Hannah [Department of Physics and Astronomy, University of Wyoming, Laramie, WY 82071 (United States); Rodigas, Timothy J. [Department of Terrestrial Magnetism, Carnegie Institute of Washington, 5241 Branch Road, NW, Washington, DC 20015 (United States); Tamura, Motohide [The University of Tokyo, National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo, 181-8588 (Japan); Wisniewski, John P., E-mail: gschneider@as.arizona.edu [H. L. Dodge Department of Physics and Astronomy, University of Oklahoma, 440 West Brooks Street, Norman, OK 73019 (United States)

    2016-09-01

    We present new Hubble Space Telescope observations of three a priori known starlight-scattering circumstellar debris systems (CDSs) viewed at intermediate inclinations around nearby close-solar analog stars: HD 207129, HD 202628, and HD 202917. Each of these CDSs possesses ring-like components that are more massive analogs of our solar system's Edgeworth–Kuiper Belt. These systems were chosen for follow-up observations to provide imaging with higher fidelity and better sensitivity for the sparse sample of solar-analog CDSs that range over two decades in systemic ages, with HD 202628 and HD 207129 (both ∼2.3 Gyr) currently the oldest CDSs imaged in visible or near-IR light. These deep (10–14 ks) observations, made with six-roll point-spread-function template visible-light coronagraphy using the Space Telescope Imaging Spectrograph, were designed to better reveal their angularly large debris rings of diffuse/low surface brightness, and for all targets probe their exo-ring environments for starlight-scattering materials that present observational challenges for current ground-based facilities and instruments. Contemporaneously also observing with a narrower occulter position, these observations additionally probe the CDS endo-ring environments that are seen to be relatively devoid of scatterers. We discuss the morphological, geometrical, and photometric properties of these CDSs also in the context of other CDSs hosted by FGK stars that we have previously imaged as a homogeneously observed ensemble. From this combined sample we report a general decay in quiescent-disk F {sub disk}/ F {sub star} optical brightness ∼ t {sup −0.8}, similar to what is seen at thermal IR wavelengths, and CDSs with a significant diversity in scattering phase asymmetries, and spatial distributions of their starlight-scattering grains.

  7. Developing public health clinical decision support systems (CDSS for the outpatient community in New York City: our experience

    Directory of Open Access Journals (Sweden)

    Singer Jesse

    2011-09-01

    Full Text Available Abstract Background Developing a clinically relevant set of quality measures that can be effectively used by an electronic health record (EHR is difficult. Whether it is achieving internal consensus on relevant priority quality measures, communicating to EHR vendors' whose programmers generally lack clinical contextual knowledge, or encouraging implementation of EHR that meaningfully impacts health outcomes, the path is challenging. However, greater transparency of population health, better accountability, and ultimately improved health outcomes is the goal and EHRs afford us a realistic chance of reaching it in a scalable way. Method In this article, we summarize our experience as a public health government agency with developing measures for a public health oriented EHR in New York City in partnership with a commercial EHR vendor. Results From our experience, there are six key lessons that we share in this article that we believe will dramatically increase the chance of success. First, define the scope and build consensus. Second, get support from executive leadership. Third, find an enthusiastic and competent software partner. Fourth, implement a transparent operational strategy. Fifth, create and test the EHR system with real life scenarios. Last, seek help when you need it. Conclusions Despite the challenges, we encourage public health agencies looking to build a similarly focused public health EHR to create one both for improved individual patient as well as the larger population health.

  8. Developing a decision support system for tobacco use counselling using primary care physicians

    Directory of Open Access Journals (Sweden)

    Theodore Marcy

    2008-07-01

    Conclusions A multi-method evaluation process utilising primary care physicians proved useful for developing a CDSS that was acceptable to physicians and patients, and feasible to use in their clinical environment.

  9. Publication, discovery and interoperability of Clinical Decision Support Systems: A Linked Data approach.

    Science.gov (United States)

    Marco-Ruiz, Luis; Pedrinaci, Carlos; Maldonado, J A; Panziera, Luca; Chen, Rong; Bellika, J Gustav

    2016-08-01

    The high costs involved in the development of Clinical Decision Support Systems (CDSS) make it necessary to share their functionality across different systems and organizations. Service Oriented Architectures (SOA) have been proposed to allow reusing CDSS by encapsulating them in a Web service. However, strong barriers in sharing CDS functionality are still present as a consequence of lack of expressiveness of services' interfaces. Linked Services are the evolution of the Semantic Web Services paradigm to process Linked Data. They aim to provide semantic descriptions over SOA implementations to overcome the limitations derived from the syntactic nature of Web services technologies. To facilitate the publication, discovery and interoperability of CDS services by evolving them into Linked Services that expose their interfaces as Linked Data. We developed methods and models to enhance CDS SOA as Linked Services that define a rich semantic layer based on machine interpretable ontologies that powers their interoperability and reuse. These ontologies provided unambiguous descriptions of CDS services properties to expose them to the Web of Data. We developed models compliant with Linked Data principles to create a semantic representation of the components that compose CDS services. To evaluate our approach we implemented a set of CDS Linked Services using a Web service definition ontology. The definitions of Web services were linked to the models developed in order to attach unambiguous semantics to the service components. All models were bound to SNOMED-CT and public ontologies (e.g. Dublin Core) in order to count on a lingua franca to explore them. Discovery and analysis of CDS services based on machine interpretable models was performed reasoning over the ontologies built. Linked Services can be used effectively to expose CDS services to the Web of Data by building on current CDS standards. This allows building shared Linked Knowledge Bases to provide machine

  10. Usability Testing of a Complex Clinical Decision Support Tool in the Emergency Department: Lessons Learned.

    Science.gov (United States)

    Press, Anne; McCullagh, Lauren; Khan, Sundas; Schachter, Andy; Pardo, Salvatore; McGinn, Thomas

    2015-09-10

    As the electronic health record (EHR) becomes the preferred documentation tool across medical practices, health care organizations are pushing for clinical decision support systems (CDSS) to help bring clinical decision support (CDS) tools to the forefront of patient-physician interactions. A CDSS is integrated into the EHR and allows physicians to easily utilize CDS tools. However, often CDSS are integrated into the EHR without an initial phase of usability testing, resulting in poor adoption rates. Usability testing is important because it evaluates a CDSS by testing it on actual users. This paper outlines the usability phase of a study, which will test the impact of integration of the Wells CDSS for pulmonary embolism (PE) diagnosis into a large urban emergency department, where workflow is often chaotic and high stakes decisions are frequently made. We hypothesize that conducting usability testing prior to integration of the Wells score into an emergency room EHR will result in increased adoption rates by physicians. The objective of the study was to conduct usability testing for the integration of the Wells clinical prediction rule into a tertiary care center's emergency department EHR. We conducted usability testing of a CDS tool in the emergency department EHR. The CDS tool consisted of the Wells rule for PE in the form of a calculator and was triggered off computed tomography (CT) orders or patients' chief complaint. The study was conducted at a tertiary hospital in Queens, New York. There were seven residents that were recruited and participated in two phases of usability testing. The usability testing employed a "think aloud" method and "near-live" clinical simulation, where care providers interacted with standardized patients enacting a clinical scenario. Both phases were audiotaped, video-taped, and had screen-capture software activated for onscreen recordings. Phase I: Data from the "think-aloud" phase of the study showed an overall positive outlook on

  11. Cost and economic benefit of clinical decision support systems for cardiovascular disease prevention: a community guide systematic review.

    Science.gov (United States)

    Jacob, Verughese; Thota, Anilkrishna B; Chattopadhyay, Sajal K; Njie, Gibril J; Proia, Krista K; Hopkins, David P; Ross, Murray N; Pronk, Nicolaas P; Clymer, John M

    2017-05-01

    This review evaluates costs and benefits associated with acquiring, implementing, and operating clinical decision support systems (CDSSs) to prevent cardiovascular disease (CVD). Methods developed for the Community Guide were used to review CDSS literature covering the period from January 1976 to October 2015. Twenty-one studies were identified for inclusion. It was difficult to draw a meaningful estimate for the cost of acquiring and operating CDSSs to prevent CVD from the available studies ( n  = 12) due to considerable heterogeneity. Several studies ( n  = 11) indicated that health care costs were averted by using CDSSs but many were partial assessments that did not consider all components of health care. Four cost-benefit studies reached conflicting conclusions about the net benefit of CDSSs based on incomplete assessments of costs and benefits. Three cost-utility studies indicated inconsistent conclusions regarding cost-effectiveness based on a conservative $50,000 threshold. Intervention costs were not negligible, but specific estimates were not derived because of the heterogeneity of implementation and reporting metrics. Expected economic benefits from averted health care cost could not be determined with confidence because many studies did not fully account for all components of health care. We were unable to conclude whether CDSSs for CVD prevention is either cost-beneficial or cost-effective. Several evidence gaps are identified, most prominently a lack of information about major drivers of cost and benefit, a lack of standard metrics for the cost of CDSSs, and not allowing for useful life of a CDSS that generally extends beyond one accounting period. Published by Oxford University Press on behalf of the American Medical Informatics Association 2017. This work is written by US Government employees and is in the public domain in the US.

  12. The use and effectiveness of electronic clinical decision support tools in the ambulatory/primary care setting: a systematic review of the literature

    Directory of Open Access Journals (Sweden)

    Cathy Bryan

    2008-07-01

    Conclusion Although there is validation that CDSS has the potential to produce statistically significant improvement in outcomes, there is much variability among the types and methods of CDSS implementation and resulting effectiveness. As CDSS will likely continue to be at the forefront of the march toward effective standards-based care, more work needs to be done to determine effective implementation strategies for the use of CDSS across multiple settings and patient populations.

  13. Artificial intelligence: contemporary applications and future compass.

    Science.gov (United States)

    Khanna, Sunali

    2010-08-01

    The clinical use of information technology in the dental profession has increased substantially in the past 10 to 20 years. In most developing countries an insufficiency of medical and dental specialists has increased the mortality of patients suffering from various diseases. Employing technology, especially artificial intelligence technology, in medical and dental application could reduce cost, time, human expertise and medical error. This approach has the potential to revolutionise the dental public health scenario in developing countries. Clinical decision support systems (CDSS) are computer programs that are designed to provide expert support for health professionals. The applications in dental sciences vary from dental emergencies to differential diagnosis of orofacial pain, radiographic interpretations, analysis of facial growth in orthodontia to prosthetic dentistry. However, despite the recognised need for CDSS, the implementation of these systems has been limited and slow. This can be attributed to lack of formal evaluation of the systems, challenges in developing standard representations, cost and practitioner scepticism about the value and feasibility of CDSS. Increasing public awareness of safety and quality has accelerated the adoption of generic knowledge based CDSS. Information technology applications for dental practice continue to develop rapidly and will hopefully contribute to reduce the morbidity and mortality of oral and maxillofacial diseases and in turn impact patient care.

  14. Behavioral medicine perspectives on the design of health information technology to improve decision-making, guideline adherence, and care coordination in chronic pain management.

    Science.gov (United States)

    Midboe, Amanda M; Lewis, Eleanor T; Cronkite, Ruth C; Chambers, Dallas; Goldstein, Mary K; Kerns, Robert D; Trafton, Jodie A

    2011-03-01

    Development of clinical decision support systems (CDSs) has tended to focus on facilitating medication management. An understanding of behavioral medicine perspectives on the usefulness of a CDS for patient care can expand CDSs to improve management of chronic disease. The purpose of this study is to explore feedback from behavioral medicine providers regarding the potential for CDSs to improve decision-making, care coordination, and guideline adherence in pain management. Qualitative methods were used to analyze semi-structured interview responses from behavioral medicine stakeholders following demonstration of an existing CDS for opioid prescribing, ATHENA-OT. Participants suggested that a CDS could assist with decision-making by educating providers, providing recommendations about behavioral therapy, facilitating risk assessment, and improving referral decisions. They suggested that a CDS could improve care coordination by facilitating division of workload, improving patient education, and increasing consideration and knowledge of options in other disciplines. Clinical decision support systems are promising tools for improving behavioral medicine care for chronic pain.

  15. Informing physicians using a situated decision support system: Disease management for the smart city

    Directory of Open Access Journals (Sweden)

    Raafat George Saade

    2014-12-01

    Full Text Available We are in the midst of a healthcare paradigm shift driven by the wide adoption of ubiquitous computing and various modes of information communications technologies. As a result, cities worldwide are undergoing a major process of urbanization with ever increasing wealth of sensing capabilities – hence the Internet of Things (IoT. These trends impose great pressure on how healthcare is done. This paper describes the design and implementation of a situated clinical decision support (SCDSS system, most appropriate for smart cities. The SCDSS was prototyped and enhanced in a clinic. The SCDSS was then used in a clinic as well as in a university hospital centre. In this article, the system’s architecture, subcomponents and integrated workflow are described. The systems’ design was the result of a knowledge acquisition process involving interviews with five specialists and testing with 50 patients. The reports (specialist consultation report generated by the SCDSS were shown to general practitioners who were not able to distinguish them from human specialist reports. We propose a context-aware CDSS and assess its effectiveness in managing a wide medical range of patients. Five different patient cases were identified for analysis. The SCDSS was used to produce draft electronic specialist consultations, which were then compared to the original specialists’ consultations. It was found that the SCDSS-generated consults were of better quality for a number of reasons discussed herein. SCDSSs have great promise for their use in the clinical environment of smart cities. Valuable insights into the integration and use of situated clinical decision support systems are highlighted and suggestions for future research are given.

  16. An Algorithm Using Twelve Properties of Antibiotics to Find the Recommended Antibiotics, as in CPGs.

    Science.gov (United States)

    Tsopra, R; Venot, A; Duclos, C

    2014-01-01

    Clinical Decision Support Systems (CDSS) incorporating justifications, updating and adjustable recommendations can considerably improve the quality of healthcare. We propose a new approach to the design of CDSS for empiric antibiotic prescription, based on implementation of the deeper medical reasoning used by experts in the development of clinical practice guidelines (CPGs), to deduce the recommended antibiotics. We investigated two methods ("exclusion" versus "scoring") for reproducing this reasoning based on antibiotic properties. The "exclusion" method reproduced expert reasoning the more accurately, retrieving the full list of recommended antibiotics for almost all clinical situations. This approach has several advantages: (i) it provides convincing explanations for physicians; (ii) updating could easily be incorporated into the CDSS; (iii) it can provide recommendations for clinical situations missing from CPGs.

  17. Clinical decision support systems for primary care: the identification of promising application areas and an initial design of a CDSS for lower back pain

    NARCIS (Netherlands)

    Oude Nijeweme-d'Hollosy, W.; Velsen, L. van; Swinkels, I.C.S.; Hermens, H.

    2015-01-01

    Decision support technology has the potential to change the way professionals treat patients for the better. We questioned thirty-three healthcare professionals on their view about the usage of eHealth technology within their daily practice, and areas in which decision support can play a role, to

  18. Machine Learning Approach to Optimizing Combined Stimulation and Medication Therapies for Parkinson's Disease.

    Science.gov (United States)

    Shamir, Reuben R; Dolber, Trygve; Noecker, Angela M; Walter, Benjamin L; McIntyre, Cameron C

    2015-01-01

    Deep brain stimulation (DBS) of the subthalamic region is an established therapy for advanced Parkinson's disease (PD). However, patients often require time-intensive post-operative management to balance their coupled stimulation and medication treatments. Given the large and complex parameter space associated with this task, we propose that clinical decision support systems (CDSS) based on machine learning algorithms could assist in treatment optimization. Develop a proof-of-concept implementation of a CDSS that incorporates patient-specific details on both stimulation and medication. Clinical data from 10 patients, and 89 post-DBS surgery visits, were used to create a prototype CDSS. The system was designed to provide three key functions: (1) information retrieval; (2) visualization of treatment, and; (3) recommendation on expected effective stimulation and drug dosages, based on three machine learning methods that included support vector machines, Naïve Bayes, and random forest. Measures of medication dosages, time factors, and symptom-specific pre-operative response to levodopa were significantly correlated with post-operative outcomes (P < 0.05) and their effect on outcomes was of similar magnitude to that of DBS. Using those results, the combined machine learning algorithms were able to accurately predict 86% (12/14) of the motor improvement scores at one year after surgery. Using patient-specific details, an appropriately parameterized CDSS could help select theoretically optimal DBS parameter settings and medication dosages that have potential to improve the clinical management of PD patients. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. Multi-model-based interactive authoring environment for creating shareable medical knowledge.

    Science.gov (United States)

    Ali, Taqdir; Hussain, Maqbool; Ali Khan, Wajahat; Afzal, Muhammad; Hussain, Jamil; Ali, Rahman; Hassan, Waseem; Jamshed, Arif; Kang, Byeong Ho; Lee, Sungyoung

    2017-10-01

    Technologically integrated healthcare environments can be realized if physicians are encouraged to use smart systems for the creation and sharing of knowledge used in clinical decision support systems (CDSS). While CDSSs are heading toward smart environments, they lack support for abstraction of technology-oriented knowledge from physicians. Therefore, abstraction in the form of a user-friendly and flexible authoring environment is required in order for physicians to create shareable and interoperable knowledge for CDSS workflows. Our proposed system provides a user-friendly authoring environment to create Arden Syntax MLM (Medical Logic Module) as shareable knowledge rules for intelligent decision-making by CDSS. Existing systems are not physician friendly and lack interoperability and shareability of knowledge. In this paper, we proposed Intelligent-Knowledge Authoring Tool (I-KAT), a knowledge authoring environment that overcomes the above mentioned limitations. Shareability is achieved by creating a knowledge base from MLMs using Arden Syntax. Interoperability is enhanced using standard data models and terminologies. However, creation of shareable and interoperable knowledge using Arden Syntax without abstraction increases complexity, which ultimately makes it difficult for physicians to use the authoring environment. Therefore, physician friendliness is provided by abstraction at the application layer to reduce complexity. This abstraction is regulated by mappings created between legacy system concepts, which are modeled as domain clinical model (DCM) and decision support standards such as virtual medical record (vMR) and Systematized Nomenclature of Medicine - Clinical Terms (SNOMED CT). We represent these mappings with a semantic reconciliation model (SRM). The objective of the study is the creation of shareable and interoperable knowledge using a user-friendly and flexible I-KAT. Therefore we evaluated our system using completeness and user satisfaction

  20. Event-Based Impulsive Control of Continuous-Time Dynamic Systems and Its Application to Synchronization of Memristive Neural Networks.

    Science.gov (United States)

    Zhu, Wei; Wang, Dandan; Liu, Lu; Feng, Gang

    2017-08-18

    This paper investigates exponential stabilization of continuous-time dynamic systems (CDSs) via event-based impulsive control (EIC) approaches, where the impulsive instants are determined by certain state-dependent triggering condition. The global exponential stability criteria via EIC are derived for nonlinear and linear CDSs, respectively. It is also shown that there is no Zeno-behavior for the concerned closed loop control system. In addition, the developed event-based impulsive scheme is applied to the synchronization problem of master and slave memristive neural networks. Furthermore, a self-triggered impulsive control scheme is developed to avoid continuous communication between the master system and slave system. Finally, two numerical simulation examples are presented to illustrate the effectiveness of the proposed event-based impulsive controllers.

  1. Impact of four training conditions on physician use of a web-based clinical decision support system.

    Science.gov (United States)

    Kealey, Edith; Leckman-Westin, Emily; Finnerty, Molly T

    2013-09-01

    Training has been identified as an important barrier to implementation of clinical decision support systems (CDSSs), but little is known about the effectiveness of different training approaches. Using an observational retrospective cohort design, we examined the impact of four training conditions on physician use of a CDSS: (1) computer lab training with individualized follow-up (CL-FU) (n=40), (2) computer lab training without follow-up (CL) (n=177), (3) lecture demonstration (LD) (n=16), or (4) no training (NT) (n=134). Odds ratios of any use and ongoing use under training conditions were compared to no training over a 2-year follow-up period. CL-FU was associated with the highest percent of active users and odds for any use (90.0%, odds ratio (OR)=10.2, 95% confidence interval (CI): 3.2-32.9) and ongoing use (60.0%, OR=6.1 95% CI: 2.6-13.7), followed by CL (any use=81.4%, OR=5.3, CI: 2.9-9.6; ongoing use=28.8%, OR=1.7, 95% CI: 1.0-3.0). LD was not superior to no training (any use=47%, ongoing use=22.4%). Training format may have differential effects on initial and long-term follow-up of CDSSs use by physicians. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. mHealth for Clinical Decision-Making in Sub-Saharan Africa: A Scoping Review.

    Science.gov (United States)

    Adepoju, Ibukun-Oluwa Omolade; Albersen, Bregje Joanna Antonia; De Brouwere, Vincent; van Roosmalen, Jos; Zweekhorst, Marjolein

    2017-03-23

    In a bid to deliver quality health services in resource-poor settings, mobile health (mHealth) is increasingly being adopted. The role of mHealth in facilitating evidence-based clinical decision-making through data collection, decision algorithms, and evidence-based guidelines, for example, is established in resource-rich settings. However, the extent to which mobile clinical decision support systems (mCDSS) have been adopted specifically in resource-poor settings such as Africa and the lessons learned about their use in such settings are yet to be established. The aim of this study was to synthesize evidence on the use of mHealth for point-of-care decision support and improved quality of care by health care workers in Africa. A scoping review of 4 peer-reviewed and 1 grey literature databases was conducted. No date limits were applied, but only articles in English language were selected. Using pre-established criteria, 2 reviewers screened articles and extracted data. Articles were analyzed using Microsoft Excel and MAXQDA. We retained 22 articles representing 11 different studies in 7 sub-Saharan African countries. Interventions were mainly in the domain of maternal health and ranged from simple text messaging (short message service, SMS) to complex multicomponent interventions. Although health workers are generally supportive of mCDSS and perceive them as useful, concerns about increased workload and altered workflow hinder sustainability. Facilitators and barriers to use of mCDSS include technical and infrastructural support, ownership, health system challenges, and training. The use of mCDSS in sub-Saharan Africa is an indication of progress in mHealth, although their effect on quality of service delivery is yet to be fully explored. Lessons learned are useful for informing future research, policy, and practice for technologically supported health care delivery, especially in resource-poor settings. ©Ibukun-Oluwa Omolade Adepoju, Bregje Joanna Antonia

  3. Comparison of AI techniques for prediction of liver fibrosis in hepatitis patients.

    Science.gov (United States)

    Keltch, Brian; Lin, Yuan; Bayrak, Coskun

    2014-08-01

    Globally one in twelve people have the Hepatitis B or Hepatitis C virus. Diagnosis and treatment of this disease is guided by liver biopsies where a small amount of tissue is removed by a surgeon and examined by a pathologist to determine the fibrosis stage from F(0) (no damage) to F(4) (cirrhosis). Biopsies are costly and carry some risk for the patient. Non-invasive techniques for determining fibrosis stage have been developed and evaluated since 2003. Non-invasive methods have utilized serum markers, imaging test, and genetic studies. The accuracy of these non-invasive techniques has not achieved sufficient acceptance and so the invasive biopsy is still considered the gold standard.Clinical decision support systems (CDSS) use decision support system theory and technology to assist clinicians in the evaluation and treatment process. Using historical clinical data and the relationship processed by Artificial Intelligence (AI) techniques to aid physicians in their decision making process is the goal of CDSS. The CDSS provides a large number of medical support functions to help clinicians make the most reasonable diagnosis and choose the best treatment measures.This paper applies four artificial intelligence predictive techniques to publicly available data on 424 Hepatitis B and Hepatitis C patients. Demographic and standard serum markers are utilized to predict fibrosis stage and compare these predictions to known biopsy results. A final decision tree evaluation is applied to make a final prediction. We have also developed a publically available web application that can be used as a prototype for presenting AI predictive results in a CDSS environment based on these models. This technique along with others could mitigate the need for some liver biopsies in the more than 500 million Hepatitis B and C patients worldwide with additional validation and verification.

  4. Analyzing the "CareGap": assessing gaps in adherence to clinical guidelines in adult soft tissue sarcoma.

    Science.gov (United States)

    Waks, Zeev; Goldbraich, Esther; Farkash, Ariel; Torresani, Michele; Bertulli, Rossella; Restifo, Nicola; Locatelli, Paolo; Casali, Paolo; Carmeli, Boaz

    2013-01-01

    Clinical decision support systems (CDSSs) are gaining popularity as tools that assist physicians in optimizing medical care. These systems typically comply with evidence-based medicine and are designed with input from domain experts. Nonetheless, deviations from CDSS recommendations are abundant across a broad spectrum of disorders, raising the question as to why this phenomenon exists. Here, we analyze this gap in adherence to a clinical guidelines-based CDSS by examining the physician treatment decisions for 1329 adult soft tissue sarcoma patients in northern Italy using patient-specific parameters. Dubbing this analysis "CareGap", we find that deviations correlate strongly with certain disease features such as local versus metastatic clinical presentation. We also notice that deviations from the guideline-based CDSS suggestions occur more frequently for patients with shorter survival time. Such observations can direct physicians' attention to distinct patient cohorts that are prone to higher deviation levels from clinical practice guidelines. This illustrates the value of CareGap analysis in assessing quality of care for subsets of patients within a larger pathology.

  5. Implementing an evidence-based computerized decision support system to improve patient care in a general hospital: the CODES study protocol for a randomized controlled trial.

    Science.gov (United States)

    Moja, Lorenzo; Polo Friz, Hernan; Capobussi, Matteo; Kwag, Koren; Banzi, Rita; Ruggiero, Francesca; González-Lorenzo, Marien; Liberati, Elisa Giulia; Mangia, Massimo; Nyberg, Peter; Kunnamo, Ilkka; Cimminiello, Claudio; Vighi, Giuseppe; Grimshaw, Jeremy; Bonovas, Stefanos

    2016-07-07

    Computerized decision support systems (CDSSs) are information technology-based software that provide health professionals with actionable, patient-specific recommendations or guidelines for disease diagnosis, treatment, and management at the point-of-care. These messages are intelligently filtered to enhance the health and clinical care of patients. CDSSs may be integrated with patient electronic health records (EHRs) and evidence-based knowledge. We designed a pragmatic randomized controlled trial to evaluate the effectiveness of patient-specific, evidence-based reminders generated at the point-of-care by a multi-specialty decision support system on clinical practice and the quality of care. We will include all the patients admitted to the internal medicine department of one large general hospital. The primary outcome is the rate at which medical problems, which are detected by the decision support software and reported through the reminders, are resolved (i.e., resolution rates). Secondary outcomes are resolution rates for reminders specific to venous thromboembolism (VTE) prevention, in-hospital all causes and VTE-related mortality, and the length of hospital stay during the study period. The adoption of CDSSs is likely to increase across healthcare systems due to growing concerns about the quality of medical care and discrepancy between real and ideal practice, continuous demands for a meaningful use of health information technology, and the increasing use of and familiarity with advanced technology among new generations of physicians. The results of our study will contribute to the current understanding of the effectiveness of CDSSs in primary care and hospital settings, thereby informing future research and healthcare policy questions related to the feasibility and value of CDSS use in healthcare systems. This trial is seconded by a specialty trial randomizing patients in an oncology setting (ONCO-CODES). ClinicalTrials.gov, https://clinicaltrials.gov/ct2

  6. Comparative evaluation of the drug interaction screening programs MediQ and ID PHARMA CHECK in neurological inpatients.

    Science.gov (United States)

    Zorina, Olesya I; Haueis, Patrick; Semmler, Alexander; Marti, Isabelle; Gonzenbach, Roman R; Guzek, Markus; Kullak-Ublick, Gerd A; Weller, Michael; Russmann, Stefan

    2012-08-01

    The comparative evaluation of clinical decision support software (CDSS) programs regarding their sensitivity and positive predictive value for the identification of clinically relevant drug interactions. In this research, we used a cross-sectional study that identified potential drug interactions using the CDSS MediQ and the ID PHARMA CHECK in 484 neurological inpatients. Interactions were reclassified according to the Zurich Interaction System, a multidimensional classification that incorporates the Operational Classification of Drug Interactions. In 484 patients with 2812 prescriptions, MediQ and ID PHARMA CHECK generated a total of 1759 and 1082 alerts, respectively. MediQ identified 658 unique potentially interacting combinations, 8 classified as "high danger," 164 as "average danger," and 486 as "low danger." ID PHARMA CHECK detected 336 combinations assigned to one or several of 12 risk and management categories. Altogether, both CDSS issued alerts relating to 808 unique potentially interacting combinations. According to the Zurich Interaction System, 6 of these were contraindicated, 25 were provisionally contraindicated, 190 carried a conditional risk, and 587 had a minimal risk of adverse events. The positive predictive value for alerts having at least a conditional risk was 0.24 for MediQ and 0.48 for ID PHARMA CHECK. CDSS showed major differences in the identification and grading of interactions, and many interactions were only identified by one of the two CDSS. For both programs, only a small proportion of all identified interactions appeared clinically relevant, and the selected display of alerts that imply management changes is a key issue in the further development and local setup of such programs. Copyright © 2012 John Wiley & Sons, Ltd.

  7. Knowledge Integration and Use-Case Analysis for a Customized Drug-Drug Interaction CDS Service

    Science.gov (United States)

    Kam, Hye Jin; Park, Man Young; Kim, Woojae; Yoon, Duk Yong; Ahn, Eun Kyoung; Park, Rae Woong

    Clinical decision support systems (CDSSs) are thought to reduce adverse drug events (ADEs) by monitoring drug-drug interactions(DDIs). However, clinically improper or excessive alerts can result in high alert overrides. A tailored CDS service, which is appropriate for clinicians and their ordering situations, is required to increase alert acceptance. In this study, we conducted a 12-week pilot project adopting a tailed CDSS at an emergency department. The new CDSS was conducted via a stepwise integration of additional new rules. The alert status with changes in acceptance rate was analyzed. The most frequent DDI alerts were related to prescriptions of anti-inflammatory drugs. The percentages of alert overrides for each stage were 98.0%, 96.0%, 96.9%, and 98.1%, respectively. 91.5% of overridden alerts were related to discharge medications. To reduce the potential hazards of ADEs, the development of an effective customized DDI CDSS is required, via in-depth analysis on alert patterns and overridden reasons.

  8. Supporting the Support System: How Assessment and Communication Can Help Patients and Their Support Systems.

    Science.gov (United States)

    Harkey, Jane; Young, Jared; Carter, Jolynne Jo; Demoratz, Michael

    The benefits of having a support system, such as social relationships with close friends and family, have been well documented for patients with serious health issues. As scientific evidence has shown, individuals who have the lowest level of involvement in social relationships face a greater mortality risk. Support systems, however, are not infallible. Relationship stress can have a negative impact on people-patient and caregiver alike-behaviorally, psychosocially, and physiologically. The purpose of this article is to encourage case managers who take a patient-centered approach to also consider the existence and extent of the support system, as well as any stresses or tensions that are observable within the support system. Although the case manager is ethically obliged to advocate for the individual receiving case management services, that advocacy can be extended to the support system for the good of all. This discussion applies to numerous case management practices and work settings including (but not limited to) hospital-based case management, home health, geriatrics, catastrophic case management, mental health, palliative care, and end of life/hospice. As part of the assessment phase of the case management process, case managers determine the extent of the patient's support system or social support network such as family and close friends. Although their advocacy is primarily for the patient receiving case management services, case managers also become aware of the needs of the support system members as they face their loved one's serious illness, severe injury, geriatric care demands, or end of life. Case managers can use their communication skills, especially motivational interviewing, with patients and their support systems to identify stresses and issues that can impact the pursuit of health goals. In addition, case managers ensure that individuals and their support systems are kept informed such as about the health condition, stage of disease, plan of

  9. Restriction-modification systems in Mycoplasma spp

    Directory of Open Access Journals (Sweden)

    Marcelo Brocchi

    2007-01-01

    Full Text Available Restriction and Modification (R-M systems are present in all Mycoplasma species sequenced so far. The presence of these genes poses barriers to gene transfer and could protect the cell against phage infections. The number and types of R-M genes between different Mycoplasma species are variable, which is characteristic of a polymorphism. The majority of the CDSs code for Type III R-M systems and particularly for methyltransferase enzymes, which suggests that functions other than the protection against the invasion of heterologous DNA may exist. A possible function of these enzymes could be the protection against the invasion of other but similar R-M systems. In Mycoplasma hyopneumoniae strain J, three of the putative methyltransferase genes were clustered in a region forming a genomic island. Many R-M CDSs were mapped in the vicinity of transposable elements suggesting an association between these genes and reinforcing the idea of R-M systems as mobile selfish DNA. Also, many R-M genes present repeats within their coding sequences, indicating that their expression is under the control of phase variation mechanisms. Altogether, these data suggest that R-M systems are a remarkable characteristic of Mycoplasma species and are probably involved in the adaptation of these bacteria to different environmental conditions.

  10. Informing the design of clinical decision support services for evaluation of children with minor blunt head trauma in the emergency department: a sociotechnical analysis.

    Science.gov (United States)

    Sheehan, Barbara; Nigrovic, Lise E; Dayan, Peter S; Kuppermann, Nathan; Ballard, Dustin W; Alessandrini, Evaline; Bajaj, Lalit; Goldberg, Howard; Hoffman, Jeffrey; Offerman, Steven R; Mark, Dustin G; Swietlik, Marguerite; Tham, Eric; Tzimenatos, Leah; Vinson, David R; Jones, Grant S; Bakken, Suzanne

    2013-10-01

    Integration of clinical decision support services (CDSS) into electronic health records (EHRs) may be integral to widespread dissemination and use of clinical prediction rules in the emergency department (ED). However, the best way to design such services to maximize their usefulness in such a complex setting is poorly understood. We conducted a multi-site cross-sectional qualitative study whose aim was to describe the sociotechnical environment in the ED to inform the design of a CDSS intervention to implement the Pediatric Emergency Care Applied Research Network (PECARN) clinical prediction rules for children with minor blunt head trauma. Informed by a sociotechnical model consisting of eight dimensions, we conducted focus groups, individual interviews and workflow observations in 11 EDs, of which 5 were located in academic medical centers and 6 were in community hospitals. A total of 126 ED clinicians, information technology specialists, and administrators participated. We clustered data into 19 categories of sociotechnical factors through a process of thematic analysis and subsequently organized the categories into a sociotechnical matrix consisting of three high-level sociotechnical dimensions (workflow and communication, organizational factors, human factors) and three themes (interdisciplinary assessment processes, clinical practices related to prediction rules, EHR as a decision support tool). Design challenges that emerged from the analysis included the need to use structured data fields to support data capture and re-use while maintaining efficient care processes, supporting interdisciplinary communication, and facilitating family-clinician interaction for decision-making. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. A Primer on Bayesian Decision Analysis With an Application to a Kidney Transplant Decision.

    Science.gov (United States)

    Neapolitan, Richard; Jiang, Xia; Ladner, Daniela P; Kaplan, Bruce

    2016-03-01

    A clinical decision support system (CDSS) is a computer program, which is designed to assist health care professionals with decision making tasks. A well-developed CDSS weighs the benefits of therapy versus the cost in terms of loss of quality of life and financial loss and recommends the decision that can be expected to provide maximum overall benefit. This article provides an introduction to developing CDSSs using Bayesian networks, such CDSS can help with the often complex decisions involving transplants. First, we review Bayes theorem in the context of medical decision making. Then, we introduce Bayesian networks, which can model probabilistic relationships among many related variables and are based on Bayes theorem. Next, we discuss influence diagrams, which are Bayesian networks augmented with decision and value nodes and which can be used to develop CDSSs that are able to recommend decisions that maximize the expected utility of the predicted outcomes to the patient. By way of comparison, we examine the benefit and challenges of using the Kidney Donor Risk Index as the sole decision tool. Finally, we develop a schema for an influence diagram that models generalized kidney transplant decisions and show how the influence diagram approach can provide the clinician and the potential transplant recipient with a valuable decision support tool.

  12. Development, implementation, and evaluation of a hybrid electronic medical record system specifically designed for a developing world surgical service.

    Science.gov (United States)

    Laing, G L; Bruce, J L; Skinner, D L; Allorto, N L; Clarke, D L; Aldous, C

    2014-06-01

    The Pietermaritzburg Metropolitan Trauma Service previously successfully constructed and implemented an electronic surgical registry (ESR). This study reports on our attempts to expand and develop this concept into a multi-functional hybrid electronic medical record (HEMR) system for use in a tertiary level surgical service. This HEMR system was designed to incorporate the function and benefits of an ESR, an electronic medical record (EMR) system, and a clinical decision support system (CDSS). Formal ethical approval to maintain the HEMR system was obtained. Appropriate software was sourced to develop the project. The data model was designed as a relational database. Following the design and construction process, the HEMR file was launched on a secure server. This provided the benefits of access security and automated backups. A systematic training program was implemented for client training. The exercise of data capture was integrated into the process of clinical workflow, taking place at multiple points in time. Data were captured at the times of admission, operative intervention, endoscopic intervention, adverse events (morbidity), and the end of patient care (discharge, transfer, or death). A quarterly audit was performed 3 months after implementation of the HEMR system. The data were extracted and audited to assess their quality. A total of 1,114 patient entries were captured in the system. Compliance rates were in the order of 87-100 %, and client satisfaction rates were high. It is possible to construct and implement a unique, simple, cost-effective HEMR system in a developing world surgical service. This information system is unique in that it combines the discrete functions of an EMR system with an ESR and a CDSS. We identified a number of potential limitations and developed interventions to ameliorate them. This HEMR system provides the necessary platform for ongoing quality improvement programs and clinical research.

  13. Automation bias: a systematic review of frequency, effect mediators, and mitigators.

    Science.gov (United States)

    Goddard, Kate; Roudsari, Abdul; Wyatt, Jeremy C

    2012-01-01

    Automation bias (AB)--the tendency to over-rely on automation--has been studied in various academic fields. Clinical decision support systems (CDSS) aim to benefit the clinical decision-making process. Although most research shows overall improved performance with use, there is often a failure to recognize the new errors that CDSS can introduce. With a focus on healthcare, a systematic review of the literature from a variety of research fields has been carried out, assessing the frequency and severity of AB, the effect mediators, and interventions potentially mitigating this effect. This is discussed alongside automation-induced complacency, or insufficient monitoring of automation output. A mix of subject specific and freetext terms around the themes of automation, human-automation interaction, and task performance and error were used to search article databases. Of 13 821 retrieved papers, 74 met the inclusion criteria. User factors such as cognitive style, decision support systems (DSS), and task specific experience mediated AB, as did attitudinal driving factors such as trust and confidence. Environmental mediators included workload, task complexity, and time constraint, which pressurized cognitive resources. Mitigators of AB included implementation factors such as training and emphasizing user accountability, and DSS design factors such as the position of advice on the screen, updated confidence levels attached to DSS output, and the provision of information versus recommendation. By uncovering the mechanisms by which AB operates, this review aims to help optimize the clinical decision-making process for CDSS developers and healthcare practitioners.

  14. Patient support systems

    International Nuclear Information System (INIS)

    Braden, A.B.; McBride, T.R.; Styblo, D.J.; Taylor, S.K.; Richey, J.B.

    1979-01-01

    A patient support system for use in computerized tomography (CT) is described. The system is particularly useful for CT scanning of the brain and also of the abdominal area. The support system consists of two moveable tables which may be translated into position for X-ray scanning of the patient's body and which may be translated incrementally and automatically to obtain scans at adjacent locations. For use with brain scans, the second table is replaced by a detachable restraint assembly which is described in detail. The support system is so designed that only a small volume of low density material will intercept the X-ray beam. (UK)

  15. Expressing clinical data sets with openEHR archetypes: a solid basis for ubiquitous computing.

    Science.gov (United States)

    Garde, Sebastian; Hovenga, Evelyn; Buck, Jasmin; Knaup, Petra

    2007-12-01

    The purpose of this paper is to analyse the feasibility and usefulness of expressing clinical data sets (CDSs) as openEHR archetypes. For this, we present an approach to transform CDS into archetypes, and outline typical problems with CDS and analyse whether some of these problems can be overcome by the use of archetypes. Literature review and analysis of a selection of existing Australian, German, other European and international CDSs; transfer of a CDS for Paediatric Oncology into openEHR archetypes; implementation of CDSs in application systems. To explore the feasibility of expressing CDS as archetypes an approach to transform existing CDSs into archetypes is presented in this paper. In case of the Paediatric Oncology CDS (which consists of 260 data items) this lead to the definition of 48 openEHR archetypes. To analyse the usefulness of expressing CDS as archetypes, we identified nine problems with CDS that currently remain unsolved without a common model underpinning the CDS. Typical problems include incompatible basic data types and overlapping and incompatible definitions of clinical content. A solution to most of these problems based on openEHR archetypes is motivated. With regard to integrity constraints, further research is required. While openEHR cannot overcome all barriers to Ubiquitous Computing, it can provide the common basis for ubiquitous presence of meaningful and computer-processable knowledge and information, which we believe is a basic requirement for Ubiquitous Computing. Expressing CDSs as openEHR archetypes is feasible and advantageous as it fosters semantic interoperability, supports ubiquitous computing, and helps to develop archetypes that are arguably of better quality than the original CDS.

  16. Exploratory Bioinformatics Study of lncRNAs in Alzheimer’s Disease mRNA Sequences with Application to Drug Development

    Directory of Open Access Journals (Sweden)

    T. Holden

    2013-01-01

    Full Text Available Long noncoding RNA (lncRNA within mRNA sequences of Alzheimer’s disease genes, namely, APP, APOE, PSEN1, and PSEN2, has been analyzed using fractal dimension (FD computation and correlation analysis. We examined lncRNA by comparing mRNA FD to corresponding coding DNA sequences (CDSs FD. APP, APOE, and PSEN1 CDSs select slightly higher FDs compared to the mRNA, while PSEN2 CDSs FDs are lower. The correlation coefficient for these sequences is 0.969. A comparative study of differentially expressed MAPK signaling pathway lncRNAs in pancreatic cancer cells shows a correlation of 0.771. Selection of higher FD CDSs could indicate interaction of Alzheimer’s gene products APP, APOE, and PSEN1. Including hypocretin sequences (where all CDSs have higher fractal dimensions than mRNA in the APP, APOE, and PSEN1 sequence analyses improves correlation, but the inclusion of erythropoietin (where all CDSs have higher FD than mRNA would suppress correlation, suggesting that HCRT, a hypothalamus neurotransmitter related to the wake/sleep cycle, might be better when compared to EPO, a glycoprotein hormone, for targeting Alzheimer’s disease drug development. Fractal dimension and entropy correlation have provided supporting evidence, consistent with evolutionary studies, for using a zebrafish model together with a mouse model, in HCRT drug development.

  17. Comprehensive process model of clinical information interaction in primary care: results of a "best-fit" framework synthesis.

    Science.gov (United States)

    Veinot, Tiffany C; Senteio, Charles R; Hanauer, David; Lowery, Julie C

    2018-06-01

    To describe a new, comprehensive process model of clinical information interaction in primary care (Clinical Information Interaction Model, or CIIM) based on a systematic synthesis of published research. We used the "best fit" framework synthesis approach. Searches were performed in PubMed, Embase, the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, Library and Information Science Abstracts, Library, Information Science and Technology Abstracts, and Engineering Village. Two authors reviewed articles according to inclusion and exclusion criteria. Data abstraction and content analysis of 443 published papers were used to create a model in which every element was supported by empirical research. The CIIM documents how primary care clinicians interact with information as they make point-of-care clinical decisions. The model highlights 3 major process components: (1) context, (2) activity (usual and contingent), and (3) influence. Usual activities include information processing, source-user interaction, information evaluation, selection of information, information use, clinical reasoning, and clinical decisions. Clinician characteristics, patient behaviors, and other professionals influence the process. The CIIM depicts the complete process of information interaction, enabling a grasp of relationships previously difficult to discern. The CIIM suggests potentially helpful functionality for clinical decision support systems (CDSSs) to support primary care, including a greater focus on information processing and use. The CIIM also documents the role of influence in clinical information interaction; influencers may affect the success of CDSS implementations. The CIIM offers a new framework for achieving CDSS workflow integration and new directions for CDSS design that can support the work of diverse primary care clinicians.

  18. C-A4-01: Computerized Clinical Decision Support During Drug Ordering for Long-term Care Residents With Renal Insufficiency

    Science.gov (United States)

    Field, Terry S; Rochon, Paula; Lee, Monica; Gavendo, Linda; Baril, Joann L; Gurwitz, Jerry H

    2010-01-01

    Objective: To determine whether a computerized clinical decision support system (CDSS) providing patient specific recommendations in real- time improves the quality of prescribing for long-term care residents with renal insufficiency. Design: A randomized trial within the long-stay units of a large long-term care facility. Randomization was within blocks by unit type. Alerts related to medication prescribing for residents with renal insufficiency were displayed to prescribers in the intervention units and hidden but tracked in control units. Measurement: The proportions of final drug orders that were appropriate were compared between intervention and control units within alert categories: recommended medication doses; recommended administration frequencies; recommendations to avoid the drug; 4) warnings of missing information. Results: The rates of alerts were nearly equal in the intervention and control units: 2.5 per 1000 resident days in the intervention units and 2.4 in the control units. The proportions of dose alerts for which the final drug orders were appropriate were similar between the intervention and control units (relative risk 0.95, 95% confidence interval 0.83, 1.1). For the remaining alert categories significantly higher proportions of final drug orders were appropriate in the intervention units: relative risk 2.4 for maximum frequency (1.4, 4.4); 2.6 for drugs that should be avoided (1.4, 5.0); and 1.8 for alerts to acquire missing information (1.1, 3.4). Overall, final drug orders were appropriate significantly more often than a relative risk 1.2 (1.0, 1.4). By tracking personnel time and expenditures, we estimated the cost of developing the CDSS as $48,668.57. Drug costs saved during the 12 months of the trial are estimated at $2,137. Conclusion: Clinical decision support for physicians prescribing medications for long-term care residents with renal insufficiency can improve the quality of prescribing decisions. However, patient well-being and

  19. Support system, excavation arrangement, and process of supporting an object

    Science.gov (United States)

    Arnold, Bill W.

    2017-08-01

    A support system, an excavation arrangement, and a process of supporting an object are disclosed. The support system includes a weight-bearing device and a camming mechanism positioned below the weight-bearing device. A downward force on the weight-bearing device at least partially secures the camming mechanism to opposing surfaces. The excavation arrangement includes a borehole, a support system positioned within and secured to the borehole, and an object positioned on and supported by the support system. The process includes positioning and securing the support system and positioning the object on the weight-bearing device.

  20. A method for making a glass supported system, such glass supported system, and the use of a glass support therefor

    NARCIS (Netherlands)

    Unnikrishnan, S.; Jansen, Henricus V.; Berenschot, Johan W.; Fazal, I.; Louwerse, M.C.; Mogulkoc, B.; Sanders, Remco G.P.; de Boer, Meint J.; Elwenspoek, Michael Curt

    2008-01-01

    The invention relates to a method for making a glass supported micro or nano system, comprising the steps of: i) providing a glass support; ii) mounting at least one system on at least one glass support; and iii) bonding the system to the glass support, such that the system is circumferentially

  1. SMARTool: A tool for clinical decision support for the management of patients with coronary artery disease based on modeling of atherosclerotic plaque process.

    Science.gov (United States)

    Sakellarios, Antonis I; Rigas, George; Kigka, Vassiliki; Siogkas, Panagiotis; Tsompou, Panagiota; Karanasiou, Georgia; Exarchos, Themis; Andrikos, Ioannis; Tachos, Nikolaos; Pelosi, Gualtriero; Parodi, Oberdan; Fotiaids, Dimitrios I

    2017-07-01

    SMARTool aims to the development of a clinical decision support system (CDSS) for the management and stratification of patients with coronary artery disease (CAD). This will be achieved by performing computational modeling of the main processes of atherosclerotic plaque growth. More specifically, computed tomography coronary angiography (CTCA) is acquired and 3-dimensional (3D) reconstruction is performed for the arterial trees. Then, blood flow and plaque growth modeling is employed simulating the major processes of atherosclerosis, such as the estimation of endothelial shear stress (ESS), the lipids transportation, low density lipoprotein (LDL) oxidation, macrophages migration and plaque development. The plaque growth model integrates information from genetic and biological data of the patients. The SMARTool system enables also the calculation of the virtual functional assessment index (vFAI), an index equivalent to the invasively measured fractional flow reserve (FFR), to provide decision support for patients with stenosed arteries. Finally, it integrates modeling of stent deployment. In this work preliminary results are presented. More specifically, the reconstruction methodology has mean value of Dice Coefficient and Hausdorff Distance is 0.749 and 1.746, respectively, while low ESS and high LDL concentration can predict plaque progression.

  2. SMM-system: A mining tool to identify specific markers in Salmonella enterica.

    Science.gov (United States)

    Yu, Shuijing; Liu, Weibing; Shi, Chunlei; Wang, Dapeng; Dan, Xianlong; Li, Xiao; Shi, Xianming

    2011-03-01

    This report presents SMM-system, a software package that implements various personalized pre- and post-BLASTN tasks for mining specific markers of microbial pathogens. The main functionalities of SMM-system are summarized as follows: (i) converting multi-FASTA file, (ii) cutting interesting genomic sequence, (iii) automatic high-throughput BLASTN searches, and (iv) screening target sequences. The utility of SMM-system was demonstrated by using it to identify 214 Salmonella enterica-specific protein-coding sequences (CDSs). Eighteen primer pairs were designed based on eighteen S. enterica-specific CDSs, respectively. Seven of these primer pairs were validated with PCR assay, which showed 100% inclusivity for the 101 S. enterica genomes and 100% exclusivity of 30 non-S. enterica genomes. Three specific primer pairs were chosen to develop a multiplex PCR assay, which generated specific amplicons with a size of 180bp (SC1286), 238bp (SC1598) and 405bp (SC4361), respectively. This study demonstrates that SMM-system is a high-throughput specific marker generation tool that can be used to identify genus-, species-, serogroup- and even serovar-specific DNA sequences of microbial pathogens, which has a potential to be applied in food industries, diagnostics and taxonomic studies. SMM-system is freely available and can be downloaded from http://foodsafety.sjtu.edu.cn/SMM-system.html. Copyright © 2011 Elsevier B.V. All rights reserved.

  3. Recommendations service for chronic disease patient in multimodel sensors home environment.

    Science.gov (United States)

    Hussain, Maqbool; Ali, Taqdir; Khan, Wajahat Ali; Afzal, Muhammad; Lee, Sungyoung; Latif, Khalid

    2015-03-01

    With advanced technologies in hand, there exist potential applications and services built around monitoring activities of daily living (ADL) of elderly people at nursing homes. Most of the elderly people in these facilities are suffering from different chronic diseases such as dementia. Existing technologies are mainly focusing on non-medication interventions and monitoring of ADL for addressing loss of autonomy or well-being. Monitoring and managing ADL related to cognitive behaviors for non-medication intervention are very effective in improving dementia patients' conditions. However, cognitive functions of patients can be improved if appropriate recommendations of medications are delivered at a particular time. Previously we developed the Secured Wireless Sensor Network Integrated Cloud Computing for Ubiquitous-Life Care (SC(3)). SC(3) services were limited to monitoring ADL of elderly people with Alzheimer's disease and providing non-medication recommendations to the patient. In this article, we propose a system called the Smart Clinical Decision Support System (CDSS) as an integral part of the SC(3) platform. Using the Smart CDSS, patients are provided with access to medication recommendations of expert physicians. Physicians are provided with an interface to create clinical knowledge for medication recommendations and to observe the patient's condition. The clinical knowledge created by physicians as the knowledge base of the Smart CDSS produces recommendations to the caregiver for medications based on each patient's symptoms.

  4. Decision support systems

    DEFF Research Database (Denmark)

    Jørgensen, L.N.; Noe, E.; Langvad, A.M.

    2007-01-01

    system Crop Protection Online is widely used by advisors and as a learning tool for students. Although the system has been validated in many field trials over the years and has shown reliable results, the number of end-users among farmers has been relatively low during the last 10 years (approximately...... 1000 farmers). A sociological investigation of farmers' decision-making styles in the area of crop protection has shown that arable farmers can be divided into three major groups: (a) system-orientated farmers, (b) experience-based farmers and (c) advisory-orientated farmers. The information required...... by these three groups to make their decisions varies and therefore different ways of using decision support systems need to be provided. Decision support systems need to be developed in close dialogue and collaboration with user groups....

  5. Improved glycemic control without hypoglycemia in elderly diabetic patients using the ubiquitous healthcare service, a new medical information system.

    Science.gov (United States)

    Lim, Soo; Kang, Seon Mee; Shin, Hayley; Lee, Hak Jong; Won Yoon, Ji; Yu, Sung Hoon; Kim, So-Youn; Yoo, Soo Young; Jung, Hye Seung; Park, Kyong Soo; Ryu, Jun Oh; Jang, Hak C

    2011-02-01

    To improve quality and efficiency of care for elderly patients with type 2 diabetes, we introduced elderly-friendly strategies to the clinical decision support system (CDSS)-based ubiquitous healthcare (u-healthcare) service, which is an individualized health management system using advanced medical information technology. We conducted a 6-month randomized, controlled clinical trial involving 144 patients aged >60 years. Participants were randomly assigned to receive routine care (control, n = 48), to the self-monitored blood glucose (SMBG, n = 47) group, or to the u-healthcare group (n = 49). The primary end point was the proportion of patients achieving A1C healthcare system refers to an individualized medical service in which medical instructions are given through the patient's mobile phone. Patients receive a glucometer with a public switched telephone network-connected cradle that automatically transfers test results to a hospital-based server. Once the data are transferred to the server, an automated system, the CDSS rule engine, generates and sends patient-specific messages by mobile phone. After 6 months of follow-up, the mean A1C level was significantly decreased from 7.8 ± 1.3% to 7.4 ± 1.0% (P healthcare group and from 7.9 ± 1.0% to 7.7 ± 1.0% (P = 0.020) in the SMBG group, compared with 7.9 ± 0.8% to 7.8 ± 1.0% (P = 0.274) in the control group. The proportion of patients with A1C healthcare group, 23.4% in the SMBG group (23.4%), and 14.0% in the control group (P healthcare service achieved better glycemic control with less hypoglycemia than SMBG and routine care and may provide effective and safe diabetes management in the elderly diabetic patients.

  6. [Habitability and life support systems].

    Science.gov (United States)

    Nefedov, Iu G; Adamovich, B A

    1988-01-01

    This paper discusses various aspects of space vehicle habitability and life support systems. It describes variations in the chemical and microbial composition of an enclosed atmosphere during prolonged real and simulated flights. The paper gives a detailed description of life support systems and environmental investigations onboard the Mir station. It also outlines the development of space vehicle habitability and life support systems as related to future flights.

  7. 14 CFR 417.307 - Support systems.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Support systems. 417.307 Section 417.307... TRANSPORTATION LICENSING LAUNCH SAFETY Flight Safety System § 417.307 Support systems. (a) General. (1) A flight safety system must include the systems required by this section to support the functions of the flight...

  8. Spill operation system decision support system

    International Nuclear Information System (INIS)

    Clark, R.

    1992-01-01

    The MSRC Spill Operation System (SOS) is a tool for the support of decision-making at the time of a catastrophic oil spill. SOS provides MSRC decision-makers with access to information about the source of the spill, the spill environment, and the availability of spill response resources. This system is designed to meet the information needs of a Response Supervisor, an Environmental Advisor, Logistics/Maintenance Supervisor, Operations Supervisor, and the MSRC Regional General Manager. The SOS project Objectives are: (1) integrate currently available data, systems, and technologies; (2) develop an application that effectively supports mobilized operations and can be adapted to support normal operations; (3) ensure that the development of computer applications is driven by user needs and not by technology; and (4) coordinate with government and other industry organizations to avoid duplication of effort. Design Objectives for SOS are: (1) centralize management information storage while decentralizing decision making capabilities; (2) boost User confidence by providing a system that is easy to learn, easy to use, and is open-quotes Sailor Proofclose quotes; and (3) use visualization technology in providing spill related information. This approach includes the use of Geographic Information System (GIS) technology for maps and geographically associated resource; and support MSRC's concept of operation which includes - a swift notification of response personnel; fast mobilization of response resources; and accurate tracking of resources during a spill. MSRC is organized into five responsibility regions

  9. NASA Advanced Exploration Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA’s Habitability Architecture Team.

  10. 49 CFR 193.2609 - Support systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Support systems. 193.2609 Section 193.2609 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Maintenance § 193.2609 Support systems. Each support system or foundation of each...

  11. Designing an architectural style for dynamic medical Cross-Organizational Workflow management system: an approach based on agents and web services.

    Science.gov (United States)

    Bouzguenda, Lotfi; Turki, Manel

    2014-04-01

    This paper shows how the combined use of agent and web services technologies can help to design an architectural style for dynamic medical Cross-Organizational Workflow (COW) management system. Medical COW aims at supporting the collaboration between several autonomous and possibly heterogeneous medical processes, distributed over different organizations (Hospitals, Clinic or laboratories). Dynamic medical COW refers to occasional cooperation between these health organizations, free of structural constraints, where the medical partners involved and their number are not pre-defined. More precisely, this paper proposes a new architecture style based on agents and web services technologies to deal with two key coordination issues of dynamic COW: medical partners finding and negotiation between them. It also proposes how the proposed architecture for dynamic medical COW management system can connect to a multi-agent system coupling the Clinical Decision Support System (CDSS) with Computerized Prescriber Order Entry (CPOE). The idea is to assist the health professionals such as doctors, nurses and pharmacists with decision making tasks, as determining diagnosis or patient data analysis without stopping their clinical processes in order to act in a coherent way and to give care to the patient.

  12. Development of decommissioning engineering support system for fugen. Development of support system during actual dismantlement works

    International Nuclear Information System (INIS)

    Masanori Izumi; Yukihiro Iguchi; Yoshiki Kannehira

    2005-01-01

    The Advanced Thermal Reactor, Fugen Nuclear Power Station was permanently shut down in March 2003, and is now preparing for decommissioning. We have been developing Decommissioning Engineering Support System (DEXUS) aimed at planning optimal dismantlement process and carrying out dismantlement work safely and precisely. DEXUS consists of 'decommissioning planning support system' and 'dismantling support system'. The dismantling support system is developed aiming at using during actual dismantling work. It consists of three subsystems such as 'Worksite Visualization System', 'Dismantling Data Collection System' and 'Generated Waste Management System'. 'Worksite Visualization System' is a support system designed to provide the necessary information to workers during actual dismantlement works. And this system adopts AR (Augmented Reality) technology, overlapping calculation information into real world. 'Dismantling Data Collection System' is to collect necessary data for improving accuracy of decommissioning planning by evaluating work content and worker equipage, work time for dismantlement works. 'Generated Waste Management system' is a system recording necessary information by attaching the barcode to dismantled wastes or the containers. We can get the information of generated waste by recording generation place, generated time, treatment method and the contents. These subsystems enable to carry out reasonable and safe decommissioning of Fugen. In addition, we expect that those systems will be used for decommissioning of other nuclear facilities in the future. (authors)

  13. Support system of a structure on a support base

    International Nuclear Information System (INIS)

    Arene, G.; Renaux, C.; Minguet, J.L.; Chantot, H.

    1984-01-01

    Two series of strips are fixed to the structure to be supported and to the base to define each one a closed convex envelope; the strips are flexible in the radial direction with regard to the envelope. The two series of strips are connected by a treillis of rigid bars set to form juxtaposed V or X. A good transversal rigidity and a certain radial flexibility are obtained. The invention can be applied to a fast neutron nuclear reactor, the reactor comprising a vertical axis vessel filled with liquid metal; the vessel rests on a support foundation by means of the support system proposed by the invention. The support system allows the supported structure to resist the effects of an eventual earthquake and brutal temperature variations [fr

  14. Supporting Multiple Cognitive Processing Styles Using Tailored Support Systems

    International Nuclear Information System (INIS)

    Tuan Q. Tran; Karen M. Feigh; Amy R. Pritchett

    2007-01-01

    According to theories of cognitive processing style or cognitive control mode, human performance is more effective when an individual's cognitive state (e.g., intuition/scramble vs. deliberate/strategic) matches his/her ecological constraints or context (e.g., utilize intuition to strive for a 'good-enough' response instead of deliberating for the 'best' response under high time pressure). Ill-mapping between cognitive state and ecological constraints are believed to lead to degraded task performance. Consequently, incorporating support systems which are designed to specifically address multiple cognitive and functional states e.g., high workload, stress, boredom, and initiate appropriate mitigation strategies (e.g., reduce information load) is essential to reduce plant risk. Utilizing the concept of Cognitive Control Models, this paper will discuss the importance of tailoring support systems to match an operator's cognitive state, and will further discuss the importance of these ecological constraints in selecting and implementing mitigation strategies for safe and effective system performance. An example from the nuclear power plant industry illustrating how a support system might be tailored to support different cognitive states is included

  15. Operator support systems activities at EPRI

    International Nuclear Information System (INIS)

    Naser, J.A.

    1993-01-01

    The integration of operator support systems supports the nuclear power plant goals of improved availability and reliability, enhanced safety, reduced operations and maintenance costs, and improved productivity. Two major aspects which supports this integration are discussed in this paper. The first is the plant communications and computing architecture which provides the infrastructure that allows the integration to exist in a easy to implement manner. Open systems concepts are utilized to guarantee interoperability of systems and interchangeability of equipment. The second is the EPRI Plant-Window System which supplies the interface between the human and the plant systems. It implements common human-machine interfaces amongst systems and supports the implementation of diagnostic and decision aids. Work in both of these areas is being done as part of the EPRI Instrumentation and Control Upgrade Program. A number of operator support systems have been developed and are in various stages of implementation, testing and utilization. Two of these, the RWCU and the EOPTS, are described here. 5 refs, 14 figs

  16. Proposal for Development of EBM-CDSS (Evidence-Based Clinical Decision Support System) to Aid Prognostication in Terminally Ill Patients

    Science.gov (United States)

    2013-10-01

    Abramson MA, Pandharipande P, Ruan D, Gold JS, Whang EE. Radical resection for T1b gallbladder cancer: a decision analysis. HPB. 2009;11(8):656-63. 10...studies assessing prognosis of lung cancer patients without treatment were eligible for inclusion. Data on mortality was extracted from all included...eligibility. Disagreements about study inclusion or exclusion were resolved via discussion until a consensus was reached. Data Extraction Data extraction

  17. Proposal for Development of EBM-CDSS (Evidence-based Clinical Decision Support System) to Aid Prognostication in Terminally Ill Patients

    Science.gov (United States)

    2012-10-01

    administrative permissions to advertise our study at TGH and among USF physicians. That is, we have obtained permissions from USF media relations department to...for estimating survival time in palliative care, Montreal, CANADA: Centre of Bioethics , Clinical Research Institute of Montreal, 2007. [18] P...guardianship program. Such a proxy must be selected by the provider’s bioethics committee and must not be employed by the provider. If the provider

  18. Proposal for Development of EBM-CDSS (Evidence-based Clinical Decision Support System) to Aid Prognostication in Terminally Ill Patients

    Science.gov (United States)

    2014-10-01

    clinical research studies. The importance of meta-analysis stems from the necessity to combine research findings that if considered separately they would...patient data collected from nine randomized trials studying the effect of Allogeneic Peripheral Blood Stem -cell transplantation (PBSCT) compared to Bone...leukemia ( CLL ) Chronic myelogenous leukemia (CML) Hodgkin’s disease (HD) Idiopathic myelofibrosis (IMF) Myelodysplastic symdrome (MDS) Multiple

  19. Design Rules for Life Support Systems

    Science.gov (United States)

    Jones, Harry

    2002-01-01

    This paper considers some of the common assumptions and engineering rules of thumb used in life support system design. One general design rule is that the longer the mission, the more the life support system should use recycling and regenerable technologies. A more specific rule is that, if the system grows more than half the food, the food plants will supply all the oxygen needed for the crew life support. There are many such design rules that help in planning the analysis of life support systems and in checking results. These rules are typically if-then statements describing the results of steady-state, "back of the envelope," mass flow calculations. They are useful in identifying plausible candidate life support system designs and in rough allocations between resupply and resource recovery. Life support system designers should always review the design rules and make quick steady state calculations before doing detailed design and dynamic simulation. This paper develops the basis for the different assumptions and design rules and discusses how they should be used. We start top-down, with the highest level requirement to sustain human beings in a closed environment off Earth. We consider the crew needs for air, water, and food. We then discuss atmosphere leakage and recycling losses. The needs to support the crew and to make up losses define the fundamental life support system requirements. We consider the trade-offs between resupplying and recycling oxygen, water, and food. The specific choices between resupply and recycling are determined by mission duration, presence of in-situ resources, etc., and are defining parameters of life support system design.

  20. Introduction to Life Support Systems

    Science.gov (United States)

    Perry, Jay

    2017-01-01

    This course provides an introduction to the design and development of life support systems to sustain humankind in the harsh environment of space. The life support technologies necessary to provide a respirable atmosphere and clean drinking water are emphasized in the course. A historical perspective, beginning with open loop systems employed aboard the earliest crewed spacecraft through the state-of-the-art life support technology utilized aboard the International Space Station today, will provide a framework for students to consider applications to possible future exploration missions and destinations which may vary greatly in duration and scope. Development of future technologies as well as guiding requirements for designing life support systems for crewed exploration missions beyond low-Earth orbit are also considered in the course.

  1. Mathematical Modeling Of Life-Support Systems

    Science.gov (United States)

    Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

    1994-01-01

    Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

  2. Professional Growth & Support System Self-Assessment

    Science.gov (United States)

    Education Resource Strategies, 2013

    2013-01-01

    The "Professional Growth & Support System Self-Assessment" is designed to help school systems evaluate their current Professional Growth & Support strategy. The self-assessment is organized around the "Eight Principles of Strategic Professional Growth & Support." Each section allows school leaders to identify the…

  3. EPICS: operating system independent device/driver support

    International Nuclear Information System (INIS)

    Kraimer, M.R.

    2003-01-01

    Originally EPICS input/output controllers (IOCs) were only supported on VME-based systems running the vxWorks operating system. Now IOCs are supported on many systems: vxWorks, RTEMS, Solaris, HPUX, Linux, WIN32, and Darwin. A challenge is to provide operating-system-independent device and driver support. This paper presents some techniques for providing such support. EPICS (Experimental Physics and Industrial Control System) is a set of software tools, libraries, and applications developed collaboratively and used worldwide to create distributed, real-time control systems for scientific instruments such as particle accelerators, telescopes, and other large scientific experiments. An important component of all EPICS-based control systems is a collection of input/output controllers (IOCs). An IOC has three primary components: (1) a real-time database; (2) channel access, which provides network access to the database; and (3) device/driver support for interfacing to equipment. This paper describes some projects related to providing device/driver support on non-vxWorks systems. In order to support IOCs on platforms other than vxWorks, operating-system-independent (OSI) application program interfaces (APIs) were defined for threads, semaphores, timers, etc. Providing support for a new platform consists of providing an operating-system-dependent implementation of the OSI APIs.

  4. System support software for TSTA

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-01-01

    The software at the Tritium Systems Test Assembly (TSTA) is logically broken into two parts, the system support software and the subsystem software. The purpose of the system support software is to isolate the subsystem software from the physical hardware. In this sense the system support software forms the kernel of the software at TSTA. The kernel software performs several functions. It gathers data from CAMAC modules and makes that data available for subsystem processes. It services requests to send commands to CAMAC modules. It provides a system of logging functions and provides for a system-wide global program state that allows highly structured interaction between subsystem processes. The kernel's most visible function is to provide the Man-Machine Interface (MMI). The MMI allows the operators a window into the physical hardware and subsystem process state. Finally the kernel provides a data archiving and compression function that allows archival data to be accessed and plotted. Such kernel software as developed and implemented at TSTA is described

  5. MACVIA-ARIA Sentinel NetworK for allergic rhinitis (MASK-rhinitis): the new generation guideline implementation.

    Science.gov (United States)

    Bousquet, J; Schunemann, H J; Fonseca, J; Samolinski, B; Bachert, C; Canonica, G W; Casale, T; Cruz, A A; Demoly, P; Hellings, P; Valiulis, A; Wickman, M; Zuberbier, T; Bosnic-Anticevitch, S; Bedbrook, A; Bergmann, K C; Caimmi, D; Dahl, R; Fokkens, W J; Grisle, I; Lodrup Carlsen, K; Mullol, J; Muraro, A; Palkonen, S; Papadopoulos, N; Passalacqua, G; Ryan, D; Valovirta, E; Yorgancioglu, A; Aberer, W; Agache, I; Adachi, M; Akdis, C A; Akdis, M; Annesi-Maesano, I; Ansotegui, I J; Anto, J M; Arnavielhe, S; Arshad, H; Baiardini, I; Baigenzhin, A K; Barbara, C; Bateman, E D; Beghé, B; Bel, E H; Ben Kheder, A; Bennoor, K S; Benson, M; Bewick, M; Bieber, T; Bindslev-Jensen, C; Bjermer, L; Blain, H; Boner, A L; Boulet, L P; Bonini, M; Bonini, S; Bosse, I; Bourret, R; Bousquet, P J; Braido, F; Briggs, A H; Brightling, C E; Brozek, J; Buhl, R; Burney, P G; Bush, A; Caballero-Fonseca, F; Calderon, M A; Camargos, P A M; Camuzat, T; Carlsen, K H; Carr, W; Cepeda Sarabia, A M; Chavannes, N H; Chatzi, L; Chen, Y Z; Chiron, R; Chkhartishvili, E; Chuchalin, A G; Ciprandi, G; Cirule, I; Correia de Sousa, J; Cox, L; Crooks, G; Costa, D J; Custovic, A; Dahlen, S E; Darsow, U; De Carlo, G; De Blay, F; Dedeu, T; Deleanu, D; Denburg, J A; Devillier, P; Didier, A; Dinh-Xuan, A T; Dokic, D; Douagui, H; Dray, G; Dubakiene, R; Durham, S R; Dykewicz, M S; El-Gamal, Y; Emuzyte, R; Fink Wagner, A; Fletcher, M; Fiocchi, A; Forastiere, F; Gamkrelidze, A; Gemicioğlu, B; Gereda, J E; González Diaz, S; Gotua, M; Grouse, L; Guzmán, M A; Haahtela, T; Hellquist-Dahl, B; Heinrich, J; Horak, F; Hourihane, J O 'b; Howarth, P; Humbert, M; Hyland, M E; Ivancevich, J C; Jares, E J; Johnston, S L; Joos, G; Jonquet, O; Jung, K S; Just, J; Kaidashev, I; Kalayci, O; Kalyoncu, A F; Keil, T; Keith, P K; Khaltaev, N; Klimek, L; Koffi N'Goran, B; Kolek, V; Koppelman, G H; Kowalski, M L; Kull, I; Kuna, P; Kvedariene, V; Lambrecht, B; Lau, S; Larenas-Linnemann, D; Laune, D; Le, L T T; Lieberman, P; Lipworth, B; Li, J; Louis, R; Magard, Y; Magnan, A; Mahboub, B; Majer, I; Makela, M J; Manning, P; De Manuel Keenoy, E; Marshall, G D; Masjedi, M R; Maurer, M; Mavale-Manuel, S; Melén, E; Melo-Gomes, E; Meltzer, E O; Merk, H; Miculinic, N; Mihaltan, F; Milenkovic, B; Mohammad, Y; Molimard, M; Momas, I; Montilla-Santana, A; Morais-Almeida, M; Mösges, R; Namazova-Baranova, L; Naclerio, R; Neou, A; Neffen, H; Nekam, K; Niggemann, B; Nyembue, T D; O'Hehir, R E; Ohta, K; Okamoto, Y; Okubo, K; Ouedraogo, S; Paggiaro, P; Pali-Schöll, I; Palmer, S; Panzner, P; Papi, A; Park, H S; Pavord, I; Pawankar, R; Pfaar, O; Picard, R; Pigearias, B; Pin, I; Plavec, D; Pohl, W; Popov, T A; Portejoie, F; Postma, D; Potter, P; Price, D; Rabe, K F; Raciborski, F; Radier Pontal, F; Repka-Ramirez, S; Robalo-Cordeiro, C; Rolland, C; Rosado-Pinto, J; Reitamo, S; Rodenas, F; Roman Rodriguez, M; Romano, A; Rosario, N; Rosenwasser, L; Rottem, M; Sanchez-Borges, M; Scadding, G K; Serrano, E; Schmid-Grendelmeier, P; Sheikh, A; Simons, F E R; Sisul, J C; Skrindo, I; Smit, H A; Solé, D; Sooronbaev, T; Spranger, O; Stelmach, R; Strandberg, T; Sunyer, J; Thijs, C; Todo-Bom, A; Triggiani, M; Valenta, R; Valero, A L; van Hage, M; Vandenplas, O; Vezzani, G; Vichyanond, P; Viegi, G; Wagenmann, M; Walker, S; Wang, D Y; Wahn, U; Williams, D M; Wright, J; Yawn, B P; Yiallouros, P K; Yusuf, O M; Zar, H J; Zernotti, M E; Zhang, L; Zhong, N; Zidarn, M; Mercier, J

    2015-11-01

    Several unmet needs have been identified in allergic rhinitis: identification of the time of onset of the pollen season, optimal control of rhinitis and comorbidities, patient stratification, multidisciplinary team for integrated care pathways, innovation in clinical trials and, above all, patient empowerment. MASK-rhinitis (MACVIA-ARIA Sentinel NetworK for allergic rhinitis) is a simple system centred around the patient which was devised to fill many of these gaps using Information and Communications Technology (ICT) tools and a clinical decision support system (CDSS) based on the most widely used guideline in allergic rhinitis and its asthma comorbidity (ARIA 2015 revision). It is one of the implementation systems of Action Plan B3 of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA). Three tools are used for the electronic monitoring of allergic diseases: a cell phone-based daily visual analogue scale (VAS) assessment of disease control, CARAT (Control of Allergic Rhinitis and Asthma Test) and e-Allergy screening (premedical system of early diagnosis of allergy and asthma based on online tools). These tools are combined with a clinical decision support system (CDSS) and are available in many languages. An e-CRF and an e-learning tool complete MASK. MASK is flexible and other tools can be added. It appears to be an advanced, global and integrated ICT answer for many unmet needs in allergic diseases which will improve policies and standards. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Education and training support system

    International Nuclear Information System (INIS)

    Kubota, Rhuji; Iyadomi, Motomi.

    1996-01-01

    In order to train the specialist such as operator or maintenance stuff of large scale plant such as nuclear power plant or thermal power plant, a high grade teaching and training support system is required as well as in training pilot of aeroplane. The specialist in such large scale plant is also a researcher in the field of machinery, electricity and physics at first, and is grown up a expert operator or maintenance stuff through learning of CAI system or OTJ used training material for teaching tool in addition of training used operating or maintenance training device imitating actual plant after acquiring determined knowledges by receiving fundamental education on nuclear and thermal power plants. In this paper, the teaching and training support systems of the nuclear and thermal power plants for a system supporting such teaching and training, respectively, were introduced. (G.K.)

  7. An intelligent interlock design support system

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Kamiyama, Masahiko

    1990-01-01

    This paper presents an intelligent interlock design support system, called Handy. BWR plant interlocks have been designed on a conventional CAD system operating on a mini-computer based time sharing system. However, its ability to support interlock designers is limited, mainly due to the system not being capable of manipulating the interlock logic. Handy improves the design efficiency with consistent manipulation of the logic and drawings, interlock simulation, versatile database management, object oriented user interface, high resolution high speed graphics, and automatic interlock outlining with a design support expert system. Handy is now being tested by designers, and is expected to greatly contribute to their efficiency. (author)

  8. Dynamism in Electronic Performance Support Systems.

    Science.gov (United States)

    Laffey, James

    1995-01-01

    Describes a model for dynamic electronic performance support systems based on NNAble, a system developed by the training group at Apple Computer. Principles for designing dynamic performance support are discussed, including a systems approach, performer-centered design, awareness of situated cognition, organizational memory, and technology use.…

  9. A Commensal Gone Bad: Complete Genome Sequence of the Prototypical Enterotoxigenic Escherichia coli Strain H10407

    Science.gov (United States)

    2010-11-01

    and Escherichia ferguso- . TABLE 2. General characteristics of the plasm ids from ETEC strains H10407 and E1392/75 Value in E. c·oli: Characteristic...0352). consetved proteins with unknown func- tions (CDSs 0673 to 0678), a flavoprotein electron transfer system (CDSs 1730 to 1734), the colanic...mediating diarrhea are not chromosomally encoded. indicating that the essential virulence factors are encoded on the plasm ids (61 ). Potentia l

  10. Computer-Supported Information Systems.

    Science.gov (United States)

    Mayhew, William H.

    1983-01-01

    The planning and implementation of a computerized management information system at a fictional small college is described. Nine key points are made regarding department involvement, centralization, gradual program implementation, lowering costs, system documentation, and upper-level administrative support. (MSE)

  11. System for technical innovation support

    International Nuclear Information System (INIS)

    2011-08-01

    This book lists field of support system, which includes tax, development work, basic research project, industrial technology, information and communications field, energy field, part and materials field, local industry, the small and medium business such as technical development field, and industry-university collaboration like summary of investment and financing support and guarantee, support of manpower such as brain pool and contact Korea, support of technique like development technology and strategy for patent, support on certification such as company and technical goods, purchase support.

  12. Life Support Systems: Environmental Monitoring

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Environmental Monitoring (EM) systems task objectives are to develop and demonstrate onboard...

  13. Novel electro-hydraulic position control system for primary mirror supporting system

    Directory of Open Access Journals (Sweden)

    Xiongbin Peng

    2016-05-01

    Full Text Available In the field of modern large-scale telescope, primary mirror supporting system technology faces the difficulties of theoretically uniform output force request and bias compensation. Therefore, a novel position control system combining hydraulic system with servo motor system is introduced. The novel system ensures uniform output force on supporting points without complicating the mechanical structure. The structures of both primary mirror supporting system and novel position system are described. Then, the mathematical model of novel position control system is derived for controller selection. A proportional–derivative controller is adopted for simulations and experiments of step response and triangle path tracking. The results show that proportional–derivative controller guarantees the system with micrometer-level positioning ability. A modified proportional–derivative controller is utilized to promote system behavior with faster response overshoot. The novel position control system is then applied on primary mirror supporting system. Coupling effect is observed among actuator partitions, and relocation of virtual pivot supporting point is chosen as the decoupling measurement. The position keeping ability of the primary mirror supporting system is verified by rotating the mirror cell at a considerably high rate. The experiment results show that the decoupled system performs better with smaller bias and shorter recovery time.

  14. Suicide risk in schizophrenia – a follow-up study after 20 years

    African Journals Online (AJOL)

    2009-10-03

    Oct 3, 2009 ... and social factors associated with their suicide risk were investigated over the two ... Calgary Depression Scale for Schizophrenia (CDSS) was administered. ..... disintegration of a social support network. When considering.

  15. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  16. Starch mediated CdS nanoparticles and their photocatalytic performance under visible light irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Firdaus, Farha, E-mail: Farha-firdaus@yahoo.co.in [Chemistry Section, Women’s College, Aligarh Muslim University, Aligarh 202002 UP (India); Faraz, Mohd [Department of Chemistry, Faculty of Science, Aligarh Muslim University, Aligarh 202002 (India)

    2016-05-06

    Green synthesis of Cadmium Sulphide (CdS-S) nanoparticles is of considerable interest due to its biocompatible and nontoxicity. Here, we present a biomolecule stimulated chemical method was adopted for the successful synthesis of CdS-S nanoparticles using starch as a capping agent. The CdS-S nanoparticles were characterized by various analytical techniques. The CdS-S nanoparicles exhibit photocatalytic activity against methyl orange (MO) at pH 9 in Visible light and the reaction follows pseudo first-order kinetics. The comparative photocatalytic activity revealed that CdS-S nanoparticles remarkably enhanced activities as compared to the commercial TiO{sub 2} nanoparticles. The outcome of these studies offers valuable for planning CdS-S nanoparticles having photocatalytic activities helpful for the formulation of waste water remediation.

  17. Starch mediated CdS nanoparticles and their photocatalytic performance under visible light irradiation

    International Nuclear Information System (INIS)

    Firdaus, Farha; Faraz, Mohd

    2016-01-01

    Green synthesis of Cadmium Sulphide (CdS-S) nanoparticles is of considerable interest due to its biocompatible and nontoxicity. Here, we present a biomolecule stimulated chemical method was adopted for the successful synthesis of CdS-S nanoparticles using starch as a capping agent. The CdS-S nanoparticles were characterized by various analytical techniques. The CdS-S nanoparicles exhibit photocatalytic activity against methyl orange (MO) at pH 9 in Visible light and the reaction follows pseudo first-order kinetics. The comparative photocatalytic activity revealed that CdS-S nanoparticles remarkably enhanced activities as compared to the commercial TiO 2 nanoparticles. The outcome of these studies offers valuable for planning CdS-S nanoparticles having photocatalytic activities helpful for the formulation of waste water remediation.

  18. Synthesis and investigation of novel shelf-stable, brain-specific chemical delivery system

    International Nuclear Information System (INIS)

    Al-Obaid, Abdulrahman M.; Farag, Hassan A.; Khalil, Ashraf A.; Hamide, Sami G. Abdel; Ahmed, Hassan S.; Al-Affifi, Ahmed M.; Gadkariem Elrasheed, A.; El-Subbagh, Hussein I.; Al-Shabanah, Othman A.; El-Kashef, Hassan A.

    2006-01-01

    A 1, 4-dihydropyridine pyridinium salt type redox system is described as a general and flexible method for site-specific and sustained delivery of drugs into the brain. Monoamine oxidase inhibitors (MAOIs) were used as a model example to be delivered into the brain. Chemical and biological oxidations of these compounds were investigated. The prepared 1, 4-dihydropyridines were subjected to various chemical and biological oxidations to evaluate their ability to cross blood brain barrier (BBB), and to be oxidized biologically into their corresponding quaternary compounds. 1-(Ethioxy-carbonylmethyl)-3, 5-bis[N-(2-fluoro-benzylideneamino)carbamoyl]-1, 4-dyhydropyridine (31) proved to cross BBB in adequate rate and converted by the oxidizing enzymes into the corresponding quaternary salt N-(ethoxycarbolynmethyl)-3, 5-bis[N-(2-fluorobenylideneamino)carbamoyl]pyridimium bromide(20). Stability studies of the synthesized chemical delivery systems (CDSs) at various pH values and temperatures showed the shelf life time of a solution containing compound 31 is 20.53 days at 5C, which recommended a lower storage temperature for such solutions. The prepared CDSs proved to be fairly stable for powder form storage. The stability of the prepared compounds is attributed to the conjugation of the two carboxylic functions at C3 and C5 of the pyridine ring with their adjacent double bonds. These results are in consistency with the original rationale design. (author)

  19. Integrated Control System Engineering Support.

    Science.gov (United States)

    1984-12-01

    Advanced Medium Range Air to Air Missile ASTEC Advanced Speech Technology Experimental Configuration BA Body Axis BCIU Bus Control Interface Unit BMU Bus...support nreeded to tie an ASTEC speech recognition system into the DIGISYN fJcility and support an FIGR experiment designed to investigate the voice...information passed to the PDP computer consisted of integers which represented words or phrases recognized by the ASTEC recognition system. An interface

  20. Consultation system for image diagnosis: Report formation support system

    International Nuclear Information System (INIS)

    Ikeda, M.; Sakuma, S.; Ishigaki, T.; Suzuki, K.; Oikawa, K.

    1987-01-01

    The authors developed a consultation system for image diagnosis, involving artificial intelligence ideas. In this system, the authors proposed a new report formation support system and implemented it in lymphangiography. This support system starts with the input of image interpretation. The input process is made mainly by selecting items. This system encodes the input findings into the semantic network, which is represented as a directed graph, and it reserves them into the knowledge database in the above structure. Finally, the output (report) is made in the near natural language, which corresponds to the input findings

  1. Preparing for a decision support system.

    Science.gov (United States)

    Callan, K

    2000-08-01

    The increasing pressure to reduce costs and improve outcomes is driving the health care industry to view information as a competitive advantage. Timely information is required to help reduce inefficiencies and improve patient care. Numerous disparate operational or transactional information systems with inconsistent and often conflicting data are no longer adequate to meet the information needs of integrated care delivery systems and networks in competitive managed care environments. This article reviews decision support system characteristics and describes a process to assess the preparedness of an organization to implement and use decision support systems to achieve a more effective, information-based decision process. Decision support tools included in this article range from reports to data mining.

  2. A customized head and neck support system

    International Nuclear Information System (INIS)

    Bentel, Gunilla C.; Marks, Lawrence B.; Sherouse, George W.; Spencer, David P.

    1995-01-01

    Purpose: To describe a customized head and neck immobilization system for patients receiving radiotherapy including a head support that conforms to the posterior contour of the head and neck. Methods: The system includes a customized headrest to support the posterior head and neck. This is fixed to a thermoplastic face mask that molds to the anterior head/face contours. The shape of these customized head and neck supports were compared to 'standard' supports. Results: This system is comfortable for the patients and appears to be effective in reproducing the setup of the treatment. Conclusions: The variability in the size and shape of the customized posterior supports exceeded that of 'standard' headrests. It is our clinical impression that the customized supports improve reproducibility and are now a standard part of our immobilization system. The quantitative analysis of the customized headrests and some commonly used 'standard' headrests suggests that the customized supports are better able to address variabilities in patient shape

  3. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  4. A maintenance support system with document handling capability

    International Nuclear Information System (INIS)

    Fukumoto, A.; Tsumura, K.; Fujii, M.; Tai, I.; Makimo, M.; Watanabe, T.

    1990-01-01

    An operation and maintenance support system, called 'Advanced Man-Machine System for Nuclear Power Plants' (MMS-NPP) is under development with the support of the Japanese Government. Taking full advantage of Artificial Intelligence technology, the system aims to enhance the capability of already developed 'Computerized Operator Support System (COSS)' and gives wider and more advanced support for operation and maintenance. With a brief overview of MMS-NPP, this paper describes a support system for plant patrol and equipment inspection. The system gives guidance for plant patrol and for equipment inspection and provides easy access to plant drawings and documents. A unique knowledge acquisition method, utilizing image processing technology, was proposed in building the system

  5. Airport Information Retrieval System (AIRS) System Support Manual

    Science.gov (United States)

    1973-01-01

    This handbook is a support manual for prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load prediction...

  6. Developing Sustainable Life Support System Concepts

    Science.gov (United States)

    Thomas, Evan A.

    2010-01-01

    Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

  7. Evaluation of decision support systems for nuclear accidents

    International Nuclear Information System (INIS)

    Sdouz, G.; Mueck, K.

    1998-05-01

    In order to adopt countermeasures to protect the public after an accident in a nuclear power plant in an appropriate and optimum way, decision support systems offer a valuable assistance in supporting the decision maker in choosing and optimizing protective actions. Such decision support systems may range from simple systems to accumulate relevant parameters for the evaluation of the situation over prediction models for the rapid evaluation of the dose to be expected to systems which permit the evaluation and comparison of possible countermeasures. Since the establishment of a decision support systems obviously is also required in Austria, an evaluation of systems available or in the state of development in other countries or unions was performed. The aim was to determine the availability of decision support systems in various countries and to evaluate them with regard to depth and extent of the system. The evaluation showed that in most industrialized countries the requirement for a decision support system was realized, but in only few countries actual systems are readily available and operable. Most systems are limited to early phase consequences, i.e. dispersion calculations of calculated source terms and the estimation of exposure in the vicinity of the plant. Only few systems offer the possibility to predict long-term exposures by ingestion. Few systems permit also an evaluation of potential countermeasures, in most cases, however, limited to a few short-term countermeasures. Only one system which is presently not operable allows the evaluation of a large number of agricultural countermeasures. In this report the different systems are compared. The requirements with regard to an Austrian decision support system are defined and consequences for a possible utilization of a DSS or parts thereof for the Austrian decision support system are derived. (author)

  8. Comparison of Digisonde and CDSS measurement for the monitoring of the existence of the Ionospheric communication channel

    Czech Academy of Sciences Publication Activity Database

    Rejfek, Luboš; Mošna, Zbyšek; Beran, L.; Chmelař, P.; Chmelařová, N.; Dobrovolný, P.; Rozsíval, P.

    2015-01-01

    Roč. 2, č. 12 (2015), s. 67-71 ISSN 2313-626X R&D Projects: GA ČR(CZ) GAP209/12/2440 Institutional support: RVO:68378289 Keywords : Ionospheric communication channel * Digisonde * Continuous Doppler Sounding System Subject RIV: DG - Athmosphere Science s, Meteorology http://www. science -gate.com/IJAAS/ Articles /2015-2-12/12%202015-2-12-pp.67-71.pdf

  9. Web-Based Learning Support System

    Science.gov (United States)

    Fan, Lisa

    Web-based learning support system offers many benefits over traditional learning environments and has become very popular. The Web is a powerful environment for distributing information and delivering knowledge to an increasingly wide and diverse audience. Typical Web-based learning environments, such as Web-CT, Blackboard, include course content delivery tools, quiz modules, grade reporting systems, assignment submission components, etc. They are powerful integrated learning management systems (LMS) that support a number of activities performed by teachers and students during the learning process [1]. However, students who study a course on the Internet tend to be more heterogeneously distributed than those found in a traditional classroom situation. In order to achieve optimal efficiency in a learning process, an individual learner needs his or her own personalized assistance. For a web-based open and dynamic learning environment, personalized support for learners becomes more important. This chapter demonstrates how to realize personalized learning support in dynamic and heterogeneous learning environments by utilizing Adaptive Web technologies. It focuses on course personalization in terms of contents and teaching materials that is according to each student's needs and capabilities. An example of using Rough Set to analyze student personal information to assist students with effective learning and predict student performance is presented.

  10. Supporting of mine workings and design of support systems. Madenlerde tahkimat isleri ve tasarmi

    Energy Technology Data Exchange (ETDEWEB)

    Biron, C; Arioglu, E; (Istanbul Teknik Universitesi, Maden Fakultesi)

    1980-01-01

    This article deals with elements of elasticity in rocks and examines the engineering properties of rocks. It includes stress distributions around mine openings and deformations of mine openings. Strata control concept in coal mining is explained. Support systems in stone drifts, gateways, shafts and longwalls are discussed; timber supports, steel arches, articulated arches, roof bolting, concrete supports, supports on mechanized faces are detailed. Emphasis is placed upon engineering properties of materials of support systems. The design concepts of mine support systems are described. The objects of the design are expressed with several numerical examples. It concludes with stowing: pneumatic stowing, and hydraulic stowing in metal and coal mining.

  11. Safety implications of electronic driving support systems : an orientation.

    OpenAIRE

    Gundy, C.M. Steyvers, F.J.J.M. & Kaptein, N.A.

    1995-01-01

    This report focuses on traffic safety aspects of driving support systems. The report consists of two parts. First of all, the report discusses a number of topics, relevant for the implementation and evaluation of driving support systems. These topics include: (1) safety research into driving support systems: (2) the importance of research into driver models and the driving task; (3) horizontal integration of driving support systems; (4) vertical integration of driving support systems; (5) tas...

  12. DMTO: a realistic ontology for standard diabetes mellitus treatment.

    Science.gov (United States)

    El-Sappagh, Shaker; Kwak, Daehan; Ali, Farman; Kwak, Kyung-Sup

    2018-02-06

    Treatment of type 2 diabetes mellitus (T2DM) is a complex problem. A clinical decision support system (CDSS) based on massive and distributed electronic health record data can facilitate the automation of this process and enhance its accuracy. The most important component of any CDSS is its knowledge base. This knowledge base can be formulated using ontologies. The formal description logic of ontology supports the inference of hidden knowledge. Building a complete, coherent, consistent, interoperable, and sharable ontology is a challenge. This paper introduces the first version of the newly constructed Diabetes Mellitus Treatment Ontology (DMTO) as a basis for shared-semantics, domain-specific, standard, machine-readable, and interoperable knowledge relevant to T2DM treatment. It is a comprehensive ontology and provides the highest coverage and the most complete picture of coded knowledge about T2DM patients' current conditions, previous profiles, and T2DM-related aspects, including complications, symptoms, lab tests, interactions, treatment plan (TP) frameworks, and glucose-related diseases and medications. It adheres to the design principles recommended by the Open Biomedical Ontologies Foundry and is based on ontological realism that follows the principles of the Basic Formal Ontology and the Ontology for General Medical Science. DMTO is implemented under Protégé 5.0 in Web Ontology Language (OWL) 2 format and is publicly available through the National Center for Biomedical Ontology's BioPortal at http://bioportal.bioontology.org/ontologies/DMTO . The current version of DMTO includes more than 10,700 classes, 277 relations, 39,425 annotations, 214 semantic rules, and 62,974 axioms. We provide proof of concept for this approach to modeling TPs. The ontology is able to collect and analyze most features of T2DM as well as customize chronic TPs with the most appropriate drugs, foods, and physical exercises. DMTO is ready to be used as a knowledge base for

  13. The iSCREEN Electronic Diabetes Dashboard: A Tool to Improve Knowledge and Implementation of Pediatric Clinical Practice Guidelines.

    Science.gov (United States)

    Zahanova, Stacy; Tsouka, Alexandra; Palmert, Mark R; Mahmud, Farid H

    2017-12-01

    Clinical practice guidelines (CPG) provide evidence-based recommendations for patient care but may not be optimally applied in clinical settings. As a pilot study, we evaluated the impact of a computerized, point-of-care decision support system (CDSS) on guideline knowledge and adherence in our diabetes clinic. iSCREEN, a CDSS, integrated with a province-wide electronic health record, was designed based on the Canadian Diabetes Association 2013 Clinical Practice Guidelines for the Prevention and Management of Diabetes in Canada. Evaluation data were gathered by retrospective chart review and clinician questionnaire prior to and after implementation of iSCREEN. Records of patients with type 1 diabetes, 14 to 18 years of age, were assessed for appropriate screening for complications and comorbidities. To assess guideline adherence, 50 charts were reviewed at 2 time periods (25 before and 25 after launch of iSCREEN). Results revealed improved frequency of appropriate screening for diabetic nephropathy (p=0.03) and retinopathy (p=0.04), accompanied by a decrease in under- and overscreening for these outcomes. To assess guideline knowledge, 58 surveys were collected (31 prior to and 27 after the launch of iSCREEN) from care providers in the field of pediatric diabetes. There was a trend toward improved guideline knowledge in all team members (p=0.06). Implementation of a de novo CDSS was associated with improved rates of appropriate screening for diabetes-related complications. A trend toward improvement in health professionals' knowledge of the guidelines was also observed. Evaluation of this point-of-care computerized decision support tool suggests that it may facilitate diabetes care by optimizing complication screening and CPG knowledge, with the potential for broader implementation. Copyright © 2017 Diabetes Canada. Published by Elsevier Inc. All rights reserved.

  14. Life Support Systems: Wastewater Processing and Water Management

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Wastewater Processing and Water Management task: Within an integrated life support system, water...

  15. Recommendations on future development of decision support systems

    DEFF Research Database (Denmark)

    MCarthur, Stephen; Chen, Minjiang; Marinelli, Mattia

    Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems......Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems...

  16. Learning to Control Advanced Life Support Systems

    Science.gov (United States)

    Subramanian, Devika

    2004-01-01

    Advanced life support systems have many interacting processes and limited resources. Controlling and optimizing advanced life support systems presents unique challenges. In particular, advanced life support systems are nonlinear coupled dynamical systems and it is difficult for humans to take all interactions into account to design an effective control strategy. In this project. we developed several reinforcement learning controllers that actively explore the space of possible control strategies, guided by rewards from a user specified long term objective function. We evaluated these controllers using a discrete event simulation of an advanced life support system. This simulation, called BioSim, designed by Nasa scientists David Kortenkamp and Scott Bell has multiple, interacting life support modules including crew, food production, air revitalization, water recovery, solid waste incineration and power. They are implemented in a consumer/producer relationship in which certain modules produce resources that are consumed by other modules. Stores hold resources between modules. Control of this simulation is via adjusting flows of resources between modules and into/out of stores. We developed adaptive algorithms that control the flow of resources in BioSim. Our learning algorithms discovered several ingenious strategies for maximizing mission length by controlling the air and water recycling systems as well as crop planting schedules. By exploiting non-linearities in the overall system dynamics, the learned controllers easily out- performed controllers written by human experts. In sum, we accomplished three goals. We (1) developed foundations for learning models of coupled dynamical systems by active exploration of the state space, (2) developed and tested algorithms that learn to efficiently control air and water recycling processes as well as crop scheduling in Biosim, and (3) developed an understanding of the role machine learning in designing control systems for

  17. Analysis of the Pantoea ananatis pan-genome reveals factors underlying its ability to colonize and interact with plant, insect and vertebrate hosts.

    Science.gov (United States)

    De Maayer, Pieter; Chan, Wai Yin; Rubagotti, Enrico; Venter, Stephanus N; Toth, Ian K; Birch, Paul R J; Coutinho, Teresa A

    2014-05-27

    Pantoea ananatis is found in a wide range of natural environments, including water, soil, as part of the epi- and endophytic flora of various plant hosts, and in the insect gut. Some strains have proven effective as biological control agents and plant-growth promoters, while other strains have been implicated in diseases of a broad range of plant hosts and humans. By analysing the pan-genome of eight sequenced P. ananatis strains isolated from different sources we identified factors potentially underlying its ability to colonize and interact with hosts in both the plant and animal Kingdoms. The pan-genome of the eight compared P. ananatis strains consisted of a core genome comprised of 3,876 protein coding sequences (CDSs) and a sizeable accessory genome consisting of 1,690 CDSs. We estimate that ~106 unique CDSs would be added to the pan-genome with each additional P. ananatis genome sequenced in the future. The accessory fraction is derived mainly from integrated prophages and codes mostly for proteins of unknown function. Comparison of the translated CDSs on the P. ananatis pan-genome with the proteins encoded on all sequenced bacterial genomes currently available revealed that P. ananatis carries a number of CDSs with orthologs restricted to bacteria associated with distinct hosts, namely plant-, animal- and insect-associated bacteria. These CDSs encode proteins with putative roles in transport and metabolism of carbohydrate and amino acid substrates, adherence to host tissues, protection against plant and animal defense mechanisms and the biosynthesis of potential pathogenicity determinants including insecticidal peptides, phytotoxins and type VI secretion system effectors. P. ananatis has an 'open' pan-genome typical of bacterial species that colonize several different environments. The pan-genome incorporates a large number of genes encoding proteins that may enable P. ananatis to colonize, persist in and potentially cause disease symptoms in a wide range of

  18. Axiomatic Design of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Systems engineering is an organized way to design and develop systems, but the initial system design concepts are usually seen as the products of unexplained but highly creative intuition. Axiomatic design is a mathematical approach to produce and compare system architectures. The two axioms are:- Maintain the independence of the functional requirements.- Minimize the information content (or complexity) of the design. The first axiom generates good system design structures and the second axiom ranks them. The closed system human life support architecture now implemented in the International Space Station has been essentially unchanged for fifty years. In contrast, brief missions such as Apollo and Shuttle have used open loop life support. As mission length increases, greater system closure and increased recycling become more cost-effective.Closure can be gradually increased, first recycling humidity condensate, then hygiene wastewater, urine, carbon dioxide, and water recovery brine. A long term space station or planetary base could implement nearly full closure, including food production. Dynamic systems theory supports the axioms by showing that fewer requirements, fewer subsystems, and fewer interconnections all increase system stability. If systems are too complex and interconnected, reliability is reduced and operations and maintenance become more difficult. Using axiomatic design shows how the mission duration and other requirements determine the best life support system design including the degree of closure.

  19. Overview of Actuated Arm Support Systems and Their Applications

    Directory of Open Access Journals (Sweden)

    E.A. Lomonova

    2013-10-01

    Full Text Available Arm support systems provide support throughout daily tasks, training or in an industrial environment. During the last decades a large diversity of actuated arm support systems have been developed. To analyze the actuation principles in these systems, an overview of actuated arm support systems is provided. This overview visualizes the current trends on research and development of these support systems and distinguishes three categories. These categories depend mainly on the functional status of the user environment, which defines the specifications. Therefore, the actuated arm support systems are classified according to their user environment, namely: ambulatory, rehabilitation and industrial. Furthermore, three main actuation principles and three mechanical construction principles have been identified.

  20. When Informationists Get Involved: the CHICA-GIS Project.

    Science.gov (United States)

    Whipple, Elizabeth C; Odell, Jere D; Ralston, Rick K; Liu, Gilbert C

    2013-01-01

    Child Health Improvement through Computer Automation (CHICA) is a computer decision support system (CDSS) that interfaces with existing electronic medical record systems (EMRS) and delivers "just-in-time" patient-relevant guidelines to physicians during the clinical encounter and accurately captures structured data from all who interact with the system. "Delivering Geospatial Intelligence to Health Care Professionals (CHICA-GIS)" (1R01LM010923-01) expands the medical application of Geographic Information Systems (GIS) by integrating a geographic information system with CHICA. To provide knowledge management support for CHICA-GIS, three informationists at the Indiana University School of Medicine were awarded a supplement from the National Library Medicine. The informationists will enhance CHICA-GIS by: improving the accuracy and accessibility of information, managing and mapping the knowledge which undergirds the CHICA-GIS decision support tool, supporting community engagement and consumer health information outreach, and facilitating the dissemination of new CHICA-GIS research results and services.

  1. Adaptive Collaboration Support Systems : Designing Collaboration Support for Dynamic Environments

    NARCIS (Netherlands)

    Janeiro, J.; Knoll, S.W.; Lukosch, S.G.; Kolfschoten, G.L.

    2012-01-01

    Today, engineering systems offer a variety of local and webbased applications to support collaboration by assisting groups in structuring activities, generating and sharing data, and improving group communication. To ensure the quality of collaboration, engineering system design needs to analyze and

  2. Decision Support Systems for Research and Management in Advanced Life Support

    Science.gov (United States)

    Rodriquez, Luis F.

    2004-01-01

    Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

  3. NASA Advanced Explorations Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA's Habitability Architecture Team (HAT). The LSS project is focused on four areas: architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the international space station (ISS) LSS systems as a point of departure (where applicable), the mission of the LSS project is three-fold: 1. Address discrete LSS technology gaps 2. Improve the reliability of LSS systems 3. Advance LSS systems towards integrated testing on the ISS. This paper summarized the work being done in the four areas listed above to meet these objectives. Details will be given on the following focus areas: Systems Engineering and Architecture- With so many complex systems comprising life support in space, it is important to understand the overall system requirements to define life support system architectures for different space mission classes, ensure that all the components integrate well together and verify that testing is as representative of destination environments as possible. Environmental Monitoring- In an enclosed spacecraft that is constantly operating complex machinery for its own basic functionality as well as science experiments and technology demonstrations, it's possible for the environment to become compromised. While current environmental monitors aboard the ISS will alert crew members and mission control if there is an emergency, long-duration environmental monitoring cannot be done in-orbit as current methodologies

  4. Operation and safety decision-making support expert system in NPP

    International Nuclear Information System (INIS)

    Wei Yanhui; Su Desong; Chen Weihua; Zhang Jianbo

    2014-01-01

    The article first reviewed three operation support systems currently used in NPP: real-time information surveillance system, important equipment surveillance system and plant process control and monitoring system, then presents the structure and function of three expert support sub-systems (intelligent alarm monitoring system, computer-based operating procedure support system, safety information expert decision support system). Finally the article discussed the meaning of a kind of operation decision making support system. (authors)

  5. Operator Support System for Pressurized Water Reactor

    International Nuclear Information System (INIS)

    Wei Renjie; Shen Shifei

    1996-01-01

    Operator Support System for Pressurized Water Reactor (OSSPWR) has been developed under the sponsorship of IAEA from August 1994. The project is being carried out by the Department of Engineering Physics, Tsinghua University, Beijing, China. The Design concepts of the operator support functions have been established. The prototype systems of OSSPWR has been developed as well. The primary goal of the project is to create an advanced operator support system by applying new technologies such as artificial intelligence (AI) techniques, advanced communication technologies, etc. Recently, the advanced man-machine interface for nuclear power plant operators has been developed. It is connected to the modern computer systems and utilizes new high performance graphic displays. (author). 6 refs, 4 figs

  6. Using macro-arrays to study routes of infection of Helicobacter pylori in three families.

    Directory of Open Access Journals (Sweden)

    Josette Raymond

    Full Text Available BACKGROUND: Analysis of the evolutionary dynamics of Helicobacter pylori allowed tracing the spread of infection through populations on different continents but transmission pathways between individual humans have not been clearly described. MATERIALS AND METHODS: To investigate person-to-person transmission, we studied three families each including one child with persistence of symptoms after antibiotic treatment. Ten isolates from the antrum and corpus of stomach of each family member were analyzed both by sequencing of two housekeeping genes and macroarray tests. RESULTS: A total of 134 (8.4% out of the 1590 coding sequences (CDSs tested, including cag PAI and insertion sequences, were present in some but not all isolates (and are therefore defined as variable CDSs. Most of the variable CDSs encoded proteins of unknown function (76/134 or were selfish DNA including that encoding restriction/modification enzymes (13/134. Isolates colonizing the stomach of one individual can vary by point mutations, as seen in hspA, or by the gain or loss of one to five CDSs. They were considered as (genetic variants. The phylogenetic clustering of gene profiles obtained on macro-arrays allowed identifying the different strains infecting families. Two to five strains circulated within a family. Identical strains were present in at least two members of all three families supporting the accepted model of intrafamilial transmission. Surprisingly, the mother was not implicated in the transmission of H. pylori in the two French families. Sibling-to-sibling transmission and acquisition of H. pylori from outside the family appeared to be probable in the transmission pathways. CONCLUSION: Macroarray analysis based on previously selected CDSs gives a comprehensive view of the genome diversity of a pathogen. This approach combined with information on the origin of the hspA and glmM alleles revealed that Helicobacter pylori infection may be acquired by more diverse routes

  7. Operator support system for nuclear power plants

    International Nuclear Information System (INIS)

    Mori, Nobuyuki; Tai, Ichiro; Sudo, Osamu; Naito, Norio.

    1987-01-01

    The nuclear power generation in Japan maintains the high capacity factor, and its proportion taken in the total generated electric power exceeded 1/4, thus it has become the indispensable energy source. Recently moreover, the nuclear power plants which are harmonious with operators and easy to operate are demanded. For realizing this, the technical development such as the heightening of operation watching performance, the adoption of automation, and the improvement of various man-machine systems for reducing the burden of operators has been advanced by utilizing electronic techniques. In this paper, the trend of the man-machine systems in nuclear power plants, the positioning of operation support system, the support in the aspects of information, action and knowledge, the example of a new central control board, the operation support system using a computer, an operation support expert system and the problems hereafter are described. As the development of the man-machine system in nuclear power plants, the upgrading from a present new central control board system PODIA through A-PODIA, in which the operational function to deal with various phenomena arising in plants and safety control function are added, to 1-PODIA, in which knowledge engineering technology is adopted, is expected. (Kako, I.)

  8. Support system for Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Sasajima, Fumio; Ohtomo, Akitoshi; Sakurai, Fumio; Onizawa, Koji

    1999-01-01

    In the research reactor of JAERI, the Neutron Activation Analysis (NAA) has been utilized as a major part of an irradiation usage. To utilize NAA, research participants are always required to learn necessary technique. Therefore, we started to examine a support system that will enable to carry out INAA easily even by beginners. The system is composed of irradiation device, gamma-ray spectrometer and data analyzing instruments. The element concentration is calculated by using KAYZERO/SOLCOI software with the K 0 standardization method. In this paper, we review on a construction of this INAA support system in JRR-3M of JAERI. (author)

  9. Real time alert system: a disease management system leveraging health information exchange.

    Science.gov (United States)

    Anand, Vibha; Sheley, Meena E; Xu, Shawn; Downs, Stephen M

    2012-01-01

    Rates of preventive and disease management services can be improved by providing automated alerts and reminders to primary care providers (PCPs) using of health information technology (HIT) tools. Using Adaptive Turnaround Documents (ATAD), an existing Health Information Exchange (HIE) infrastructure and office fax machines, we developed a Real Time Alert (RTA) system. RTA is a computerized decision support system (CDSS) that is able to deliver alerts to PCPs statewide for recommended services around the time of the patient visit. RTA is also able to capture structured clinical data from providers using existing fax technology. In this study, we evaluate RTA's performance for alerting PCPs when their patients with asthma have an emergency room visit anywhere in the state. Our results show that RTA was successfully able to deliver "just in time" patient-relevant alerts to PCPs across the state. Furthermore, of those ATADs faxed back and automatically interpreted by the RTA system, 35% reported finding the provided information helpful. The PCPs who reported finding information helpful also reported making a phone call, sending a letter or seeing the patient for follow up care. We have successfully demonstrated the feasibility of electronically exchanging important patient related information with the PCPs statewide. This is despite a lack of a link with their electronic health records. We have shown that using our ATAD technology, a PCP can be notified quickly of an important event such as a patient's asthma related emergency room admission so further follow up can happen in near real time.

  10. ACADEMIC INTEGRITY SUPPORT SYSTEM FOR UKRAINIAN UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    V. G. Sherstjuk

    2017-04-01

    Full Text Available Purpose. Developing the methodology for providing academic integrity in the university. The methodology is based on Web-oriented academic integrity support system, developed by the authors, which enters into the information system of learning process control. Academic integrity support system is aimed at maintaining academic integrity as a basic institutional value, which will help to reduce corruption, plagiarism and other types of academic dishonesty. Methodology. The methodology of problem to solve is based on the development of the information system of education process control with the integral elements of quality control. The information subsystem of academic integrity support is its basic part. Findings. The proposed information system allows us to fulfill the following levels: educational process monitoring; audit of internal processes, which is necessary for developing the effective quality control system; assessment of achievements of educational process participants; formalization of the interaction of educational process participants. The system is aimed at the development of new academic society based on the following principles: open access to the information, at which the access of wide audience to the information provides participation, forming the sense of responsibility and social control; transparency of the information, by which its relevance, quality, reliability are meant; responsibility of all members of educational process; measurability, at which any action in educational process should be measured; detail of describing the actions, results and processes; support, which is meant by automatic tools of the realization of the principles of open access to the information, transparency of the information, responsibility of all participants of educational process, measurability, detail, support. The practical realization of information system is based on the development of a common repository of university information. The

  11. Decision support systems and expert systems for risk and safety analysis

    International Nuclear Information System (INIS)

    Baybutt, P.

    1986-01-01

    During the last 1-2 years, rapid developments have occurred in the development of decision support systems and expert systems to aid in decision making related to risk and safety of industrial plants. These activities are most noteworthy in the nuclear industry where numerous systems are under development with implementation often being made on personal computers. An overview of some of these developments is provided, and an example of one recently developed decision support system is given. This example deals with CADET, a system developed to aid the U.S. Nuclear Regulatory Commission in making decisions related to the topical issue of source terms resulting from degraded core accidents in light water reactors. The paper concludes with some comments on the likely directions of future developments in decision support systems and expert systems to aid in the management of risk and safety in industrial plants. (author)

  12. Selecting effective persuasive strategies in behavior change support systems: Third International Workshop on Behavior Change Support Systems (BCSS 2015)

    NARCIS (Netherlands)

    Kelders, Saskia Marion; Kulyk, Olga Anatoliyivna; van Gemert-Pijnen, Julia E.W.C.; Oinas-Kukkonen, Harri; Kelders, Saskia; Kulyk, Olga; van Gemert-Pijnen, Lisette; Oinas-Kukkonen, Harri

    2015-01-01

    The Third International Workshop on Behavior Change Support Systems provides a place to discuss recent advances in BCSS research. The selected papers show that research into behavior change support systems is expanding: not only by trying to reach more and other people, but also by expanding the

  13. Monitoring support system for nuclear power plant

    International Nuclear Information System (INIS)

    Higashikawa, Yuichi; Kubota, Rhuji; Tanaka, Keiji; Takano, Yoshiyuki

    1996-01-01

    The nuclear power plants in Japan reach to 49 plants and supply 41.19 million kW in their installed capacities, which is equal to about 31% of total electric power generation and has occupied an important situation as a stable energy supplying source. As an aim to keeping safe operation and working rate of the power plants, various monitoring support systems using computer technology, optical information technology and robot technology each advanced rapidly in recent year have been developed to apply to the actual plants for a plant state monitoring system of operators in normal operation. Furthermore, introduction of the emergent support system supposed on accidental formation of abnormal state of the power plants is also investigated. In this paper, as a monitoring system in the recent nuclear power plants, design of control panel of recent central control room, introduction to its actual plant and monitoring support system in development were described in viewpoints of improvement of human interface, upgrade of sensor and signal processing techniques, and promotion of information service technique. And, trend of research and development of portable miniature detector and emergent monitoring support system are also introduced in a viewpoint of labor saving and upgrade of the operating field. (G.K.)

  14. Development of support system for nuclear power plant piping

    International Nuclear Information System (INIS)

    Horino, Satoshi

    1987-01-01

    Ishikawajima-Harima Heavy Industries Co., Ltd. has advanced the development of Integrated Nuclear Plant Piping System (INUPPS) for nuclear power plants since 1980, and continued its improvement up to now. This time as its component, a piping support system (PISUP) has been developed. The piping support system deals with the structures such as piping supports and the stands for maintenance and inspection, and as for standard supporting structures, it builds up automatically the structures including the selection of optimum members by utilizing the standard patterns in cooperation with the piping design system including piping stress analysis. As for the supporting structures deviating from the standard, by amending a part of the standard patterns in dialogue from, structures can be built up. By using the data produced in this way, this system draws up consistently a design book, production management data and so on. From the viewpoint of safety, particular consideration is given to the aseismatic capability of nuclear power plants, and piping is fundamentally designed regidly to avoid resonance. It is necessary to make piping supports so as to have sufficient strength and rigidity. The features of the design of piping supports for nuclear power plant, the basic concept of piping support system, the constitution of the software and hardware, the standard patterns and the structural patterns of piping support system and so on are described. (Kako, I.)

  15. A Support Database System for Integrated System Health Management (ISHM)

    Science.gov (United States)

    Schmalzel, John; Figueroa, Jorge F.; Turowski, Mark; Morris, John

    2007-01-01

    The development, deployment, operation and maintenance of Integrated Systems Health Management (ISHM) applications require the storage and processing of tremendous amounts of low-level data. This data must be shared in a secure and cost-effective manner between developers, and processed within several heterogeneous architectures. Modern database technology allows this data to be organized efficiently, while ensuring the integrity and security of the data. The extensibility and interoperability of the current database technologies also allows for the creation of an associated support database system. A support database system provides additional capabilities by building applications on top of the database structure. These applications can then be used to support the various technologies in an ISHM architecture. This presentation and paper propose a detailed structure and application description for a support database system, called the Health Assessment Database System (HADS). The HADS provides a shared context for organizing and distributing data as well as a definition of the applications that provide the required data-driven support to ISHM. This approach provides another powerful tool for ISHM developers, while also enabling novel functionality. This functionality includes: automated firmware updating and deployment, algorithm development assistance and electronic datasheet generation. The architecture for the HADS has been developed as part of the ISHM toolset at Stennis Space Center for rocket engine testing. A detailed implementation has begun for the Methane Thruster Testbed Project (MTTP) in order to assist in developing health assessment and anomaly detection algorithms for ISHM. The structure of this implementation is shown in Figure 1. The database structure consists of three primary components: the system hierarchy model, the historical data archive and the firmware codebase. The system hierarchy model replicates the physical relationships between

  16. 30 CFR 75.817 - Cable handling and support systems.

    Science.gov (United States)

    2010-07-01

    ... High-Voltage Longwalls § 75.817 Cable handling and support systems. Longwall mining equipment must be provided with cable-handling and support systems that are constructed, installed and maintained to minimize... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable handling and support systems. 75.817...

  17. Decision support system for Wamakersvallei Winery

    CSIR Research Space (South Africa)

    Van Der Merwe, A

    2007-09-01

    Full Text Available The goal of the study is to lend decision support to management a a wine cellar in three areas of expertise, with Wamakersvallei Winery serving as a special case study. This decision support system is to be delivered in the form of Excel spreadsheet...

  18. The Logistics Management Decision Support System (LMDSS) : an effective tool to reduce life cycle support costs of aviation systems

    OpenAIRE

    Moore, Ellen E.; Snyder, Carolynn M.

    1998-01-01

    Approved for public release; distribution is unlimited This thesis assesses the capability of the Logistics Management Decision Support System (LMDSS) to meet the information needs of Naval Air Systems Command (NAVAIR) logistics managers based on surveys of logistics managers and interviews with LMDSS program representatives. The LMDSS is being introduced as a tool to facilitate action by NAVAIR logistics managers to reduce the life cycle support costs of aviation systems while protecting ...

  19. Radwaste Decision Support System

    International Nuclear Information System (INIS)

    Westrom, G.; Vance, J.N.; Gelhaus, F.E.

    1989-01-01

    The purpose of the Radwaste Decision Support System (RDSS) is to provide expert advice, analysis results and instructional material relative to the treatment, handling, transport and disposal of low-level radioactive waste produced in nuclear power plants. This functional specification addresses the following topics: Functions of the RDSS, Relationships and interfaces between the function, Development of the decisions and logic tree structures embodied in waste management, Elements of the database and the characteristics required to support the decision-making process, Specific User requirements for the RDSS, Development of the user interface, Basic software architecture, and Concepts for the RDSS usage including updating and maintenance

  20. Clinical Information Support System (CISS)

    Data.gov (United States)

    Department of Veterans Affairs — Clinical Information Support System (CISS) is a web-based portal application that provides a framework of services for the VA enterprise and supplies an integration...

  1. Operator decision support system for sodium loop

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwang Hyeang; Park, Kyu Ho; Kim, Tak Kon; Jo, Choong Ho; Seong, Kyeong A; Lee, Keon Myeong; Kim, Yeong Dal; Kim, Chang Beom; Kim, Jong Kyu; Jo, Hee Chang; Lee, Ji Hyeong; Jeong, Yoon Soo; Chio, Jong Hyeong; Jeong, Bong Joon; Hong, Joon Seong; Kim, Bong Wan; Seong, Byeong Hak [Korea Advanced Institute Science and Technology, Taejon (Korea, Republic of)

    1994-07-01

    The objective of this study is to develop an operator decision support system by computerizing the sodium circuit. This study developed graphical display interface for the control panel which provides the safety control of equipment, the recognition of experimental process states and sodium circuit states. In this study, basic work to develop an operator decision support real-time expert system for sodium loop was carried out. Simplification of control commands and effective operation of various real-time data and signals by equipment code standardization are studied. The cost ineffectiveness of the single processor structure provides the ground for the development of cost effective parallel processing system. The important tasks of this study are (1) design and implementation of control state surveillance panel of sodium loop, (2) requirement analysis of operator support real-time expert system for sodium loop, (3) design of standard code rule for operating equipment and research on the cost effective all purpose parallel processing system and (4) requirement analysis of expert system and design of control state variables and user interface for experimental process. 10 refs., 36 figs., 20 tabs.

  2. Systems analysis support to the waste management technology center

    International Nuclear Information System (INIS)

    Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

    1988-01-01

    This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

  3. Automatic seismic support design of piping system by an object oriented expert system

    International Nuclear Information System (INIS)

    Nakatogawa, T.; Takayama, Y.; Hayashi, Y.; Fukuda, T.; Yamamoto, Y.; Haruna, T.

    1990-01-01

    The seismic support design of piping systems of nuclear power plants requires many experienced engineers and plenty of man-hours, because the seismic design conditions are very severe, the bulk volume of the piping systems is hyge and the design procedures are very complicated. Therefore we have developed a piping seismic design expert system, which utilizes the piping design data base of a 3 dimensional CAD system and automatically determines the piping support locations and support styles. The data base of this system contains the maximum allowable seismic support span lengths for straight piping and the span length reduction factors for bends, branches, concentrated masses in the piping, and so forth. The system automatically produces the support design according to the design knowledge extracted and collected from expert design engineers, and using design information such as piping specifications which give diameters and thickness and piping geometric configurations. The automatic seismic support design provided by this expert system achieves in the reduction of design man-hours, improvement of design quality, verification of design result, optimization of support locations and prevention of input duplication. In the development of this system, we had to derive the design logic from expert design engineers and this could not be simply expressed descriptively. Also we had to make programs for different kinds of design knowledge. For these reasons we adopted the object oriented programming paradigm (Smalltalk-80) which is suitable for combining programs and carrying out the design work

  4. Information Systems to Support Surveillance for Malaria Elimination

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W.; Sturrock, Hugh J. W.; Wegbreit, Jennifer; Lee, Bruce Y.; Gosling, Roly D.

    2015-01-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. PMID:26013378

  5. Compactly Supported Curvelet-Type Systems

    DEFF Research Database (Denmark)

    Rasmussen, Kenneth Niemann; Nielsen, Morten

    2012-01-01

    We study a flexible method for constructing curvelet-type frames. These curvelet-type systems have the same sparse representation properties as curvelets for appropriate classes of smooth functions, and the flexibility of the method allows us to give a constructive description of how to construct...... curvelet-type systems with a prescribed nature such as compact support in direct space. The method consists of using the machinery of almost diagonal matrices to show that a system of curvelet molecules which is sufficiently close to curvelets constitutes a frame for curvelet-type spaces. Such a system...

  6. Development of refueling support system

    International Nuclear Information System (INIS)

    Nishimura, Hiroshi; Hayashi, Shoichi; Sano, Kazuya; Hochin, Koji; Iguchi, Yukihiro

    1992-01-01

    The refueling of Fugen Nuclear Power Station requires correct management of fuels, etc. And empirical knowledge is necessary for efficient planning and refueling. Fugen developed refueling support system and put it into practical operation. The system features a network of refueling equipment and AI rules aquired from operators knowledge. The system helps make an optimized plan, displays step-by-step guidance and prints out lists of fuel locations and movements. The system reduced the labor of the operators, optimized the management and improved the reliability of the refueling. (author)

  7. Use of the decision support system RECASS NT (Radio Ecological Analysis Support System) for anti terrorism actions

    International Nuclear Information System (INIS)

    Bulgakov, V.G.; Gariyants, A.M.; Kosykh, V.S.; Shershakov, V.M.

    2006-01-01

    Decision support system RECASS NT (Radio Ecological Analysis Support System) was developed and is still enhancing in Federal Service Roshydromet for providing on-line estimates and prognoses of radiation and chemical situation in the event of an emergency, including acts of terrorism, as well as to estimate transboundary pollutants transport. RECASS NT has been installed at all ten NPPs of the Russian Federation, in Crisis Centers of Roshydromet, concern Rosenergoatom and Minatom, at plants for destroying chemical weapons. The paper describes the structure of RECASS NT system and discuss its possible application in case of an emergency on examples of using the system during radiation emergency response exercises at NPPs. RECASS NT can be used for developing recommendations regarding time when anti terrorism operations are better to be started with a view to minimize damage

  8. Toward the Modularization of Decision Support Systems

    Science.gov (United States)

    Raskin, R. G.

    2009-12-01

    Decision support systems are typically developed entirely from scratch without the use of modular components. This “stovepiped” approach is inefficient and costly because it prevents a developer from leveraging the data, models, tools, and services of other developers. Even when a decision support component is made available, it is difficult to know what problem it solves, how it relates to other components, or even that the component exists, The Spatial Decision Support (SDS) Consortium was formed in 2008 to organize the body of knowledge in SDS within a common portal. The portal identifies the canonical steps in the decision process and enables decision support components to be registered, categorized, and searched. This presentation describes how a decision support system can be assembled from modular models, data, tools and services, based on the needs of the Earth science application.

  9. Integration of a satellite ground support system based on analysis of the satellite ground support domain

    Science.gov (United States)

    Pendley, R. D.; Scheidker, E. J.; Levitt, D. S.; Myers, C. R.; Werking, R. D.

    1994-11-01

    This analysis defines a complete set of ground support functions based on those practiced in real space flight operations during the on-orbit phase of a mission. These functions are mapped against ground support functions currently in use by NASA and DOD. Software components to provide these functions can be hosted on RISC-based work stations and integrated to provide a modular, integrated ground support system. Such modular systems can be configured to provide as much ground support functionality as desired. This approach to ground systems has been widely proposed and prototyped both by government institutions and commercial vendors. The combined set of ground support functions we describe can be used as a standard to evaluate candidate ground systems. This approach has also been used to develop a prototype of a modular, loosely-integrated ground support system, which is discussed briefly. A crucial benefit to a potential user is that all the components are flight-qualified, thus giving high confidence in their accuracy and reliability.

  10. AI User Support System for SAP ERP

    Science.gov (United States)

    Vlasov, Vladimir; Chebotareva, Victoria; Rakhimov, Marat; Kruglikov, Sergey

    2017-10-01

    An intelligent system for SAP ERP user support is proposed in this paper. It enables automatic replies on users’ requests for support, saving time for problem analysis and resolution and improving responsiveness for end users. The system is based on an ensemble of machine learning algorithms of multiclass text classification, providing efficient question understanding, and a special framework for evidence retrieval, providing the best answer derivation.

  11. Infrastructure Support for Collaborative Pervasive Computing Systems

    DEFF Research Database (Denmark)

    Vestergaard Mogensen, Martin

    Collaborative Pervasive Computing Systems (CPCS) are currently being deployed to support areas such as clinical work, emergency situations, education, ad-hoc meetings, and other areas involving information sharing and collaboration.These systems allow the users to work together synchronously......, but from different places, by sharing information and coordinating activities. Several researchers have shown the value of such distributed collaborative systems. However, building these systems is by no means a trivial task and introduces a lot of yet unanswered questions. The aforementioned areas......, are all characterized by unstable, volatile environments, either due to the underlying components changing or the nomadic work habits of users. A major challenge, for the creators of collaborative pervasive computing systems, is the construction of infrastructures supporting the system. The complexity...

  12. Instrumentation and control activities at the Electric Power Research Institute to support operator support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1995-01-01

    Most nuclear power plants in the United States continue to operate with analog instrumentation and control (I and C) technology designed 20 to 40 years ago. This equipment is approaching or exceeding its life expectancy, resulting in increasing maintenance efforts to sustain system performance. Decreasing availability of replacement parts and the accelerating deterioration of the infrastructure of manufacturers that support analog technology exacerbate obsolescence problems and resultant operation and maintenance (O and M) cost increases. Modern digital technology holds a significant potential to improve the safety, cost-effectiveness, productivity, and, therefore, competitiveness of nuclear power plants. Operator support systems provide the tools to help achieve this potential. Reliable, integrated information is a critical element for protecting the utility's capital investment and increasing availability, reliability, and productivity. Integrated operator support systems with integrated information can perform more effectively to increase productivity, to enhance safety, and to reduce O and M costs. The plant communications and computing architecture is the infrastructure needed to allow the implementation of I and C systems and associated operator support systems in an integrated manner. Current technology for distributed digital systems, plant process computers, and plant communications and computing networks support the integration of systems and information. (author). 16 refs

  13. A quality improvement project to improve the Medicare and Medicaid Services (CMS) sepsis bundle compliance rate in a large healthcare system.

    Science.gov (United States)

    Raschke, Robert A; Groves, Robert H; Khurana, Hargobind S; Nikhanj, Nidhi; Utter, Ethel; Hartling, Didi; Stoffer, Brenda; Nunn, Kristina; Tryon, Shona; Bruner, Michelle; Calleja, Maria; Curry, Steven C

    2017-01-01

    Sepsis is a leading cause of mortality and morbidity in hospitalised patients. The Centers for Medicare and Medicaid Services (CMS) mandated that US hospitals report sepsis bundle compliance rate as a quality process measure in October 2015. The specific aim of our study was to improve the CMS sepsis bundle compliance rate from 30% to 40% across 20 acute care hospitals in our healthcare system within 1 year. The study included all adult inpatients with sepsis sampled according to CMS specifications from October 2015 to September 2016. The CMS sepsis bundle compliance rate was tracked monthly using statistical process control charting. A baseline rate of 28.5% with 99% control limits was established. We implemented multiple interventions including computerised decision support systems (CDSSs) to increase compliance with the most commonly missing bundle elements. Compliance reached 42% (99% statistical process control limits 18.4%-38.6%) as CDSS was implemented system-wide, but this improvement was not sustained after CMS changed specifications of the outcome measure. Difficulties encountered elucidate shortcomings of our study methodology and of the CMS sepsis bundle compliance rate as a quality process measure.

  14. Operating-System Support for Distributed Multimedia

    NARCIS (Netherlands)

    Mullender, Sape J.; Leslie, Ian M.; McAuley, Derek

    1994-01-01

    Multimedia applications place new demands upon processors, networks and operating systems. While some network designers, through ATM for example, have considered revolutionary approaches to supporting multimedia, the same cannot be said for operating systems designers. Most work is evolutionary in

  15. Marketing analysis support system; Marketing bunseki shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    Fuji Electric Co., Ltd., in collaboration with Shitashion Japan and Arthur Andersen Ltd., developed a 'marketing analysis support system' which integrally analyzes evaluation factors of various dimensions explaining consumers' purchasing behaviors and which supports business for the efficient operation of product development and demand prediction. This system breaks down products into each evaluation factor from psychological and physical viewpoints, and carries out various kinds of multivariate analysis, thereby making it easy to understand visually, for example, what evaluation factors decide relative positional relations between evaluation factors or between products as well as the position of a product in the whole. Further, more precise marketing analysis and prediction become possible by visually grasping blank areas of products, extent of competition, distribution of products, composition of product series, etc. (translated by NEDO)

  16. PLM system support for modular product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2015-01-01

    A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...

  17. Information systems to support surveillance for malaria elimination.

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W; Sturrock, Hugh J W; Wegbreit, Jennifer; Lee, Bruce Y; Gosling, Roly D

    2015-07-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. © The American Society of Tropical Medicine and Hygiene.

  18. Intelligent tactical asset allocation support system

    NARCIS (Netherlands)

    Hiemstra, Y.

    1995-01-01

    This paper presents an advanced support system for Tactical Asset Allocation. Asset allocation explains over 90% of portfolio performance (Brinson, Hood and Beebower, 1988). Tactical asset allocation adjusts a strategic portfolio on the basis of short term market outlooks. The system includes

  19. Development of the Supported Decision Making Inventory System.

    Science.gov (United States)

    Shogren, Karrie A; Wehmeyer, Michael L; Uyanik, Hatice; Heidrich, Megan

    2017-12-01

    Supported decision making has received increased attention as an alternative to guardianship and a means to enable people with intellectual and developmental disabilities to exercise their right to legal capacity. Assessments are needed that can used by people with disabilities and their systems of supports to identify and plan for needed supports to enable decision making. This article describes the steps taken to develop such an assessment tool, the Supported Decision Making Inventory System (SDMIS), and initial feedback received from self-advocates with intellectual disability. The three sections of the SDMIS (Supported Decision Making Personal Factors Inventory, Supported Decision Making Environmental Demands Inventory, and Decision Making Autonomy Inventory) are described and implications for future research, policy, and practice are discussed.

  20. Decision Support System for Fighter Pilots

    DEFF Research Database (Denmark)

    Randleff, Lars Rosenberg

    2007-01-01

    During a mission over enemy territory a fighter aircraft may be engaged by ground based threats. The pilot can use different measures to avoid the aircraft from being detected by e.g. enemy radar systems. If the enemy detects the aircraft a missile may be fired to seek and destroy the aircraft...... and countermeasures that can be applied to mitigate threats. This work is concerned with finding proper evasive actions when a fighter aircraft is engaged by ground based threats. To help the pilot in deciding on these actions a decision support system may be implemented. The environment in which such a system must....... When new threats occur the decision support system must be able to provide suggestions within a fraction of a second. Since the time it takes to find an optimal solution to the mathematical model can not comply with this requirement solutions are sought using a metaheuristic....

  1. Visual management support system

    Science.gov (United States)

    Lee Anderson; Jerry Mosier; Geoffrey Chandler

    1979-01-01

    The Visual Management Support System (VMSS) is an extension of an existing computer program called VIEWIT, which has been extensively used by the U. S. Forest Service. The capabilities of this program lie in the rapid manipulation of large amounts of data, specifically opera-ting as a tool to overlay or merge one set of data with another. VMSS was conceived to...

  2. Artificial and bioartificial support systems for liver failure

    DEFF Research Database (Denmark)

    Liu, J P; Gluud, L L; Als-Nielsen, B

    2004-01-01

    Artificial and bioartificial liver support systems may 'bridge' patients with acute or acute-on-chronic liver failure to liver transplantation or recovery.......Artificial and bioartificial liver support systems may 'bridge' patients with acute or acute-on-chronic liver failure to liver transplantation or recovery....

  3. System Design for Transitional Aircraft Support

    Directory of Open Access Journals (Sweden)

    John P.T. Mo

    2014-01-01

    Full Text Available The Australian Defence Force and industry are undergoing significant changes in the way they work together in capability enhancement programs. There are capability gaps in maintaining and supporting current obligations during major asset acquisition, which has migrated into the front line of Royal Air Force Fighter Groups as a new capability. This paper examines a steady state support solution and argues that in order to interchange from one support solution to a new architecture there must be a period for transition, which may need its own interim business model and operational service. A preliminary study of several existing support solutions reveals the generic elements that need to be parameterized and traced through the support system architecture trajectory.

  4. Network support for system initiated checkpoints

    Science.gov (United States)

    Chen, Dong; Heidelberger, Philip

    2013-01-29

    A system, method and computer program product for supporting system initiated checkpoints in parallel computing systems. The system and method generates selective control signals to perform checkpointing of system related data in presence of messaging activity associated with a user application running at the node. The checkpointing is initiated by the system such that checkpoint data of a plurality of network nodes may be obtained even in the presence of user applications running on highly parallel computers that include ongoing user messaging activity.

  5. Supporting Space Systems Design via Systems Dependency Analysis Methodology

    Science.gov (United States)

    Guariniello, Cesare

    assess the behavior of each system based on its internal status and on the topology of its dependencies on systems connected to it. Designers and decision makers can therefore quickly analyze and explore the behavior of complex systems and evaluate different architectures under various working conditions. The methods support educated decision making both in the design and in the update process of systems architecture, reducing the need to execute extensive simulations. In particular, in the phase of concept generation and selection, the information given by the methods can be used to identify promising architectures to be further tested and improved, while discarding architectures that do not show the required level of global features. The methods, when used in conjunction with appropriate metrics, also allow for improved reliability and risk analysis, as well as for automatic scheduling and re-scheduling based on the features of the dependencies and on the accepted level of risk. This dissertation illustrates the use of the two methods in sample aerospace applications, both in the operational and in the developmental domain. The applications show how to use the developed methodology to evaluate the impact of failures, assess the criticality of systems, quantify metrics of interest, quantify the impact of delays, support informed decision making when scheduling the development of systems and evaluate the achievement of partial capabilities. A larger, well-framed case study illustrates how the Systems Operational Dependency Analysis method and the Systems Developmental Dependency Analysis method can support analysis and decision making, at the mid and high level, in the design process of architectures for the exploration of Mars. The case study also shows how the methods do not replace the classical systems engineering methodologies, but support and improve them.

  6. Health workers' knowledge of and attitudes towards computer applications in rural African health facilities.

    Science.gov (United States)

    Sukums, Felix; Mensah, Nathan; Mpembeni, Rose; Kaltschmidt, Jens; Haefeli, Walter E; Blank, Antje

    2014-01-01

    The QUALMAT (Quality of Maternal and Prenatal Care: Bridging the Know-do Gap) project has introduced an electronic clinical decision support system (CDSS) for pre-natal and maternal care services in rural primary health facilities in Burkina Faso, Ghana, and Tanzania. To report an assessment of health providers' computer knowledge, experience, and attitudes prior to the implementation of the QUALMAT electronic CDSS. A cross-sectional study was conducted with providers in 24 QUALMAT project sites. Information was collected using structured questionnaires. Chi-squared tests and one-way ANOVA describe the association between computer knowledge, attitudes, and other factors. Semi-structured interviews and focus groups were conducted to gain further insights. A total of 108 providers responded, 63% were from Tanzania and 37% from Ghana. The mean age was 37.6 years, and 79% were female. Only 40% had ever used computers, and 29% had prior computer training. About 80% were computer illiterate or beginners. Educational level, age, and years of work experience were significantly associated with computer knowledge (pworkplace. Given the low levels of computer knowledge among rural health workers in Africa, it is important to provide adequate training and support to ensure the successful uptake of electronic CDSSs in these settings. The positive attitudes to computers found in this study underscore that also rural care providers are ready to use such technology.

  7. Safety implications of electronic driving support systems : an orientation.

    NARCIS (Netherlands)

    Gundy, C.M. Steyvers, F.J.J.M. & Kaptein, N.A.

    1995-01-01

    This report focuses on traffic safety aspects of driving support systems. The report consists of two parts. First of all, the report discusses a number of topics, relevant for the implementation and evaluation of driving support systems. These topics include: (1) safety research into driving support

  8. Optimal support arrangement of piping systems using genetic algorithm

    International Nuclear Information System (INIS)

    Chiba, T.; Okado, S.; Fujii, I.; Itami, K.

    1996-01-01

    The support arrangement is one of the important factors in the design of piping systems. Much time is required to decide the arrangement of the supports. The authors applied a genetic algorithm to find the optimum support arrangement for piping systems. Examples are provided to illustrate the effectiveness of the genetic algorithm. Good results are obtained when applying the genetic algorithm to the actual designing of the piping system

  9. Development of JRR-4 operation support system

    International Nuclear Information System (INIS)

    Takahashi, Hiroki; Yamamoto, Kazuyoshi; Yoritsune, Tsutomu; Arai, Nobuyoshi; Birumachi, Takashi

    1999-03-01

    The Japan Research Reactor No.4 (JRR-4) is a light water moderated and cooled, graphite reflected, pool-type reactor with the thermal output of 3500 kW. In February 1996, a work on core modification from high-enriched fuels to low-enriched ones was started and the work on modification was completed in May 1998. As a part of the work, Operation Support System (OSS) was adopted for the purpose of reducing load of operator, preventing operator's error and supplying operation data to users. In this paper, JRR-4 Operation Support System's configuration, characteristics and development process are described. OSS consists mainly of a workstation (WS), μXL and Personal Computer (PC). WS is used for collection of operation data. μXL is used for cooling system control and PC is used for operators' support. All of the program applications used in WS, μXL and PC are designed to make sure of high flexibility for the demands on modification from operators and new operation modes. The result of adopting this system, the consolidation monitoring, automation of part of reactor operation and data management were realized. In addition, the cooling control system was compacted. (author)

  10. Research on operation support system for nuclear power plants

    International Nuclear Information System (INIS)

    Wakabayashi, Jiro

    1989-01-01

    Nuclear power plants are the typical, complex, large scale engineering system, and at the time of accidents, there is the possibility to extend disasters to wide range beyond borders, therefore, it is the feature that the requirement for their reliability and safety is much severe as compared with other engineering systems. The fact that human errors become the major cause of large accidents is in common in large scale engineering systems, and the development of the operation support system for preventing it has become an important research subject. Also the research on design support system and maintenance support system is in progress to prevent human errors. Operation support system is composed of diagnostic system, operation guide system, man-machine interface and knowledge data base, and throughout these, the research on the human errors arising in the process of human decision making becomes the basis. Rasmussen's model for decision making, the classification of human errors and the reliability analysis for men, the factors affecting human errors, the acquisition of knowledge, the compilation and management of knowledge data base, the diagnostic system, operation guide system and man-machine interface are described. (K.I.)

  11. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  12. KESS: Knowledge Engineering Support System

    OpenAIRE

    Said, Mohamed Ben; Dougherty, Nini; Anderson, Curtis; Altman, Stanley J.; Bouhaddou, Omar; Warner, Homer R.

    1987-01-01

    KESS (Knowledge Engineering Support System) is a relational information management system created at the University of Utah to document each step in the building of four expert knowledge bases. In weekly knowledge engineering sessions, groups of experts propose decision making criteria and examine information sources in the process of creating HELP knowledge frames. KESS utilizes many-to-many links with multiple files and central link files to track the different kinds of information generate...

  13. System for selecting relevant information for decision support.

    Science.gov (United States)

    Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

  14. Developing Information Systems for Competitive Intelligence Support.

    Science.gov (United States)

    Hohhof, Bonnie

    1994-01-01

    Discusses issues connected with developing information systems for competitive intelligence support; defines the elements of an effective competitive information system; and summarizes issues affecting system design and implementation. Highlights include intelligence information; information needs; information sources; decision making; and…

  15. A Comparative Study of Electronic Performance Support Systems

    Science.gov (United States)

    Nguyen, Frank; Klein, James D.; Sullivan, Howard

    2005-01-01

    Electronic performance support systems (EPSS) deliver relevant support information to users while they are performing tasks. The present study examined the effect of different types of EPSS on user performance, attitudes, system use and time on task. Employees at a manufacturing company were asked to complete a procedural software task and…

  16. Development of a simplified piping support system

    International Nuclear Information System (INIS)

    Leung, J.; Anderson, P.H.; Tang, Y.K.; Kassawara, R.P.; Tang, H.T.

    1987-01-01

    This paper presents the results of experimental and analytical studies for developing a simplified piping support system (SPSS) for nuclear power piping in place of snubbers. The basic concept of the SPSS is a passive seismic support system consisting of limit stops. Large gaps are provided to allow for free thermal expansion during normal plant operation while preventing excessive displacement during a seismic event. The results are part of a research and development program sponsored by EPRI. (orig./HP)

  17. Knowledge representation for decision support systems

    International Nuclear Information System (INIS)

    Methlie, L.B.

    1985-01-01

    This book is organized into three sections in accordance with the structure of the conference program. First section contains four major papers which were commissioned by the Programme Committee to set the tone for the conference and to provide a structured source of relevant material from contributing disciplines. The second section contains specific papers submitted to the conference, and concerned with the following topics of specific interest: epistemological issues for decision support systems (DSS), capturing organizational knowledge for DSS, complementarity between human and formal DSS, and representations for adaption. The third section contains the short papers on any topic of relevance to the theme of the conference. It is hoped that the two working conferences organized by WG 8.3 will contribute to the development of a coherent knowledge and understanding of the class of computerized information systems called Decision Support Systems. (Auth.)

  18. Requirements by the operator of supporting systems

    International Nuclear Information System (INIS)

    Grimm, E.; Lot, L.

    1996-01-01

    Requirements by the nuclear power station operator on computer support orient themselves to the various operating situations which can arise in the plant. Event-oriented or system-oriented methods of handling determine the type of support by the computer. Pure plant information in situations with few events, an intelligent alarm system in situations with many events and a guide by means of pre-prepared procedures are an aspect of the operator requirements of computer solutions. These are the themes dealt with in this paper. A further theme is the support of the operator by the ergonomics of the control room in the areas of working place, lighting, air conditioning and acoustics. (author) 4 figs

  19. Life Support Systems: Oxygen Generation and Recovery

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an...

  20. MOIDSS?- Mobile Online Intelligent Decision Support System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — GRID has had a successfully completed Phase I 'Mobile Online Intelligent Decision Support System' (MOIDSS). The system developed into a total solution that supports...

  1. ELAN - expert system supported information and management system for analytical laboratories

    International Nuclear Information System (INIS)

    Jaeschke, A.; Orth, H.; Zilly, G.

    1990-08-01

    The demand for high efficiency and short response time calls for the use of computer support in chemico-analytical laboratories. This is usually achieved by laboratory information and management systems covering the three levels of analytical instrument automation, laboratory operation support and laboratory management. The management component of the systems implemented up to now suffers from a lack of flexibility as far as unforeseen analytical investigations outside the laboratory routine work are concerned. Another drawback is the lack of adaptability with respect to structural changes in laboratory organization. It can be eliminated by the application of expert system structures and methods for the implementation of this system level. The ELAN laboratory information and management system has been developed on the basis of this concept. (orig.) [de

  2. Fault Detection for Shipboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran; Nielsen, Ulrik Dam

    2009-01-01

    In this paper a basic idea of a fault-tolerant monitoring and decision support system will be explained. Fault detection is an important part of the fault-tolerant design for in-service monitoring and decision support systems for ships. In the paper, a virtual example of fault detection...... will be presented for a containership with a real decision support system onboard. All possible faults can be simulated and detected using residuals and the generalized likelihood ratio (GLR) algorithm....

  3. MINDS - Medical Information Network Decision Support System

    National Research Council Canada - National Science Library

    Armenian, H. K

    2008-01-01

    .... The increase in and complexity of medical data at various levels of resolution has increased the need for system level advancements in clinical decision support systems that provide computer-aided...

  4. Dose calculation system for remotely supporting radiotherapy

    International Nuclear Information System (INIS)

    Saito, K.; Kunieda, E.; Narita, Y.; Kimura, H.; Hirai, M.; Deloar, H. M.; Kaneko, K.; Ozaki, M.; Fujisaki, T.; Myojoyama, A.; Saitoh, H.

    2005-01-01

    The dose calculation system IMAGINE is being developed keeping in mind remotely supporting external radiation therapy using photon beams. The system is expected to provide an accurate picture of the dose distribution in a patient body, using a Monte Carlo calculation that employs precise models of the patient body and irradiation head. The dose calculation will be performed utilising super-parallel computing at the dose calculation centre, which is equipped with the ITBL computer, and the calculated results will be transferred through a network. The system is intended to support the quality assurance of current, widely carried out radiotherapy and, further, to promote the prevalence of advanced radiotherapy. Prototypes of the modules constituting the system have already been constructed and used to obtain basic data that are necessary in order to decide on the concrete design of the system. The final system will be completed in 2007. (authors)

  5. Development of a simplified piping support system

    International Nuclear Information System (INIS)

    Leung, J.; Anderson, P.H.; Tang, Y.K.; Kassawara, R.P.; Tang, H.T.

    1987-01-01

    This paper presents the results of experimental and analytical studies for developing a simplified piping support system (SPSS) for nuclear power piping in place of snubbers. The basic concept of the SPSS is a passive seismic support system consisting of limit stops. Large gaps are provided to allow for free thermal expansion during normal plant operation while preventing excessive displacement during a seismic event. The results are part of a research and development program sponsored by the Electric Power Research Institute

  6. Database system selection for marketing strategies support in information systems

    Directory of Open Access Journals (Sweden)

    František Dařena

    2007-01-01

    Full Text Available In today’s dynamically changing environment marketing has a significant role. Creating successful marketing strategies requires large amount of high quality information of various kinds and data types. A powerful database management system is a necessary condition for marketing strategies creation support. The paper briefly describes the field of marketing strategies and specifies the features that should be provided by database systems in connection with these strategies support. Major commercial (Oracle, DB2, MS SQL, Sybase and open-source (PostgreSQL, MySQL, Firebird databases are than examined from the point of view of accordance with these characteristics and their comparison in made. The results are useful for making the decision before acquisition of a database system during information system’s hardware architecture specification.

  7. Decision Support System Based on Computational Collective Intelligence in Campus Information Systems

    Science.gov (United States)

    Saito, Yoshihito; Matsuo, Tokuro

    Education institutions such as universities have a lot of information including book information, equipment administrative information, student information, and several others. The institutions also have multiple information in time series. As collective intelligence in campus, integrating and reusing these preserved information regarding career and taking a class, university can effectively support students' decision making of their getting jobs and subjects choice. Our purpose of support is to increase student's motivation. In this paper, we focus on course record and job information included in students' information, and propose the method to analyze correlation between a pattern of taking class and job lined up. Afterwards, we propose a support system regarding getting a job and taking class by using our proposed method. For a student who has his/her favorite job to get, the system supports his/her decision making of lecture choice by recommending a set of appropriate lecture groups. On another hand, for a student who does not have favorite job to get, the system supports his/her decision making of getting job by presenting appropriate job families related with lecture group in which he/she has ever taken. The contribution of this paper is showing a concrete method to reuse the campus collective information, implementing a system, and user perspectives.

  8. Portable, space-saving medical patient support system

    Science.gov (United States)

    Bzorgi,; Fariborz, [Knoxville, TN

    2011-02-01

    A support platform having a stowed configuration and a deployed configuration on a floor. The support platform is related to stretcher devices that are used for transporting, confining, or conducting medical procedures on medical patients in medical emergencies. The support platform typically includes a work surface that has a geometric extent. A base that typically includes a plurality of frame members is provided, and the frame members are disposed across the geometric extent of, and proximal to, the work surface in the stowed configuration. The frame members are typically disposed on the floor in the deployed configuration. There is a foldable bracing system engaged with the work surface and engaged with the base. At least a portion of the foldable bracing system is disposed substantially inside at least a portion of the plurality of frame members in the stowed configuration. Further, the foldable bracing system is configured for translocation of the work surface distal from the base in the deployed configuration.

  9. System support software for TSTA [Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-10-01

    The fact that Tritium Systems Test Assembly (TSTA) is an experimental facility makes it impossible and undesirable to try to forecast the exact software requirements. Thus the software had to be written in a manner that would allow modifications without compromising the safety requirements imposed by the handling of tritium. This suggested a multi-level approach to the software. In this approach (much like the ISO network model) each level is isolated from the level below and above by cleanly defined interfaces. For example, the subsystem support level interfaces with the subsystem hardware through the software support level. Routines in the software support level provide operations like ''OPEN VALVE'' and CLOSE VALVE'' to the subsystem level. This isolates the subsystem level from the actual hardware. This is advantageous because changes can occur in any level without the need for propagating the change to any other level. The TSTA control system consists of the hardware level, the data conversion level, the operator interface level, and the subsystem process level. These levels are described

  10. Review of current status for designing severe accident management support system

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang Sub

    2000-05-01

    The development of operator support system (OSS) is ongoing in many other countries due to the complexity both in design and in operation for nuclear power plant. The computerized operator support system includes monitoring of some critical parameters, early detection of plant transient, monitoring of component status, plant maintenance, and safety parameter display, and the operator support system for these areas are developed and are being used in some plants. Up to now, the most operator support system covers the normal operation, abnormal operation, and emergency operation. Recently, however, the operator support system for severe accident is to be developed in some countries. The study for the phenomena of severe accident is not performed sufficiently, but, based on the result up to now, the operator support system even for severe accident will be developed in this study. To do this, at first, the current status of the operator support system for normal/abnormal/emergency operation is reviewed, and the positive aspects and negative aspects of systems are analyzed by their characteristics. And also, the major items that should be considered in designing the severe accident operator support system are derived from the review. With the survey of domestic and foreign operator support systems, they are reviewed in terms of the safety parameter display system, decision-making support system, and procedure-tracking system. For the severe accident, the severe accident management guideline (SAMG) which is developed by Westinghouse is reviewed; the characteristics, structure, and logical flow of SAMG are studied. In addition, the critical parameters for severe accident, which are the basis for operators decision-making in severe accident management and are supplied to the operators and the technical support center, are reviewed, too.

  11. Review of current status for designing severe accident management support system

    International Nuclear Information System (INIS)

    Jeong, Kwang Sub

    2000-05-01

    The development of operator support system (OSS) is ongoing in many other countries due to the complexity both in design and in operation for nuclear power plant. The computerized operator support system includes monitoring of some critical parameters, early detection of plant transient, monitoring of component status, plant maintenance, and safety parameter display, and the operator support system for these areas are developed and are being used in some plants. Up to now, the most operator support system covers the normal operation, abnormal operation, and emergency operation. Recently, however, the operator support system for severe accident is to be developed in some countries. The study for the phenomena of severe accident is not performed sufficiently, but, based on the result up to now, the operator support system even for severe accident will be developed in this study. To do this, at first, the current status of the operator support system for normal/abnormal/emergency operation is reviewed, and the positive aspects and negative aspects of systems are analyzed by their characteristics. And also, the major items that should be considered in designing the severe accident operator support system are derived from the review. With the survey of domestic and foreign operator support systems, they are reviewed in terms of the safety parameter display system, decision-making support system, and procedure-tracking system. For the severe accident, the severe accident management guideline (SAMG) which is developed by Westinghouse is reviewed; the characteristics, structure, and logical flow of SAMG are studied. In addition, the critical parameters for severe accident, which are the basis for operators decision-making in severe accident management and are supplied to the operators and the technical support center, are reviewed, too

  12. A Web-Based Learning Support System for Inquiry-Based Learning

    Science.gov (United States)

    Kim, Dong Won; Yao, Jingtao

    The emergence of the Internet and Web technology makes it possible to implement the ideals of inquiry-based learning, in which students seek truth, information, or knowledge by questioning. Web-based learning support systems can provide a good framework for inquiry-based learning. This article presents a study on a Web-based learning support system called Online Treasure Hunt. The Web-based learning support system mainly consists of a teaching support subsystem, a learning support subsystem, and a treasure hunt game. The teaching support subsystem allows instructors to design their own inquiry-based learning environments. The learning support subsystem supports students' inquiry activities. The treasure hunt game enables students to investigate new knowledge, develop ideas, and review their findings. Online Treasure Hunt complies with a treasure hunt model. The treasure hunt model formalizes a general treasure hunt game to contain the learning strategies of inquiry-based learning. This Web-based learning support system empowered with the online-learning game and founded on the sound learning strategies furnishes students with the interactive and collaborative student-centered learning environment.

  13. Real-time multi-task operators support system

    International Nuclear Information System (INIS)

    Wang He; Peng Minjun; Wang Hao; Cheng Shouyu

    2005-01-01

    The development in computer software and hardware technology and information processing as well as the accumulation in the design and feedback from Nuclear Power Plant (NPP) operation created a good opportunity to develop an integrated Operator Support System. The Real-time Multi-task Operator Support System (RMOSS) has been built to support the operator's decision making process during normal and abnormal operations. RMOSS consists of five system subtasks such as Data Collection and Validation Task (DCVT), Operation Monitoring Task (OMT), Fault Diagnostic Task (FDT), Operation Guideline Task (OGT) and Human Machine Interface Task (HMIT). RMOSS uses rule-based expert system and Artificial Neural Network (ANN). The rule-based expert system is used to identify the predefined events in static conditions and track the operation guideline through data processing. In dynamic status, Back-Propagation Neural Network is adopted for fault diagnosis, which is trained with the Genetic Algorithm. Embedded real-time operation system VxWorks and its integrated environment Tornado II are used as the RMOSS software cross-development. VxGUI is used to design HMI. All of the task programs are designed in C language. The task tests and function evaluation of RMOSS have been done in one real-time full scope simulator. Evaluation results show that each task of RMOSS is capable of accomplishing its functions. (authors)

  14. Instrumentation and control activities at the electric power research institute to support computerized support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1996-01-01

    Most nuclear power plants in the United States are operating with their original analog I and C equipment. This equipment requires increasing maintenance efforts to sustain systems performance. Decreasing availability of replacement parts and support organization for analog technology accentuate obsolescence problems and resultant O and M cost increases. Modern technology, especially digital systems, offers improved functionality, performance, and reliability; solutions to obsolescence of equipment; reduction in O and M costs; and the potential to enhance safety. Digital systems, including computerized support systems, with their inherent advantages will be implemented only if reliable and cost-effective implementation and licensing acceptance is achieved and if the upgraded systems supports reduced power production costs. EPRI and its member utilities are working together under the Integrated I and C Upgrade Initiative to address I and C issues. (author). 23 refs

  15. Aircraft interrogation and display system: A ground support equipment for digital flight systems

    Science.gov (United States)

    Glover, R. D.

    1982-01-01

    A microprocessor-based general purpose ground support equipment for electronic systems was developed. The hardware and software are designed to permit diverse applications in support of aircraft flight systems and simulation facilities. The implementation of the hardware, the structure of the software, describes the application of the system to an ongoing research aircraft project are described.

  16. Classification of nuclear power plant operator support systems

    International Nuclear Information System (INIS)

    Alpeev, A.S.

    1994-01-01

    The objective of this survey was to examine the general characteristics of modern nuclear power plant process monitoring/control systems and to apply developing technology (intellectual automation) in order to improve the man-machine interface. The support systems that implement each phase of the control function...information, assessment, decision-making, and implementation...were discussed, and where applicable, intellectual automation was applied to the support system. It was concluded that the application of intellectual automation, as well as other (undefined) possibilities for improving the man-machine interface, would relieve the operator of many routine activities and allow him to readily apply high potential to those poorly-formalized scenarios in which the operator's work can't be automated. It was also concluded that the development of such support systems would not be without problems, i.e. software certification, traning, and jurisdictional questions

  17. SOCOM Training and Rehearsal System (STRS) Process Improvement and Decision Support System (DSS) Development

    National Research Council Canada - National Science Library

    Crossland, Neal; Broussard, Steve

    2005-01-01

    ...) Process Improvement and Decision Support System (DSS) Development. Discussion sequence is: Why the study? Objectives; Areas of inquiry; Study products; Observations; Recommendations; Decision Support System.

  18. A Hyperknowledge Framework of Decision Support Systems.

    Science.gov (United States)

    Chang, Ai-Mei; And Others

    1994-01-01

    Presents a hyperknowledge framework of decision support systems (DSS). This framework formalizes specifics about system functionality, representation of knowledge, navigation of the knowledge system, and user-interface traits as elements of a DSS environment that conforms closely to human cognitive processes in decision making. (Contains 52…

  19. Support system for ATLAS distributed computing operations

    CERN Document Server

    Kishimoto, Tomoe; The ATLAS collaboration

    2018-01-01

    The ATLAS distributed computing system has allowed the experiment to successfully meet the challenges of LHC Run 2. In order for distributed computing to operate smoothly and efficiently, several support teams are organized in the ATLAS experiment. The ADCoS (ATLAS Distributed Computing Operation Shifts) is a dedicated group of shifters who follow and report failing jobs, failing data transfers between sites, degradation of ATLAS central computing services, and more. The DAST (Distributed Analysis Support Team) provides user support to resolve issues related to running distributed analysis on the grid. The CRC (Computing Run Coordinator) maintains a global view of the day-to-day operations. In this presentation, the status and operational experience of the support system for ATLAS distributed computing in LHC Run 2 will be reported. This report also includes operations experience from the grid site point of view, and an analysis of the errors that create the biggest waste of wallclock time. The report of oper...

  20. IAEA activity on operator support systems in nuclear power plants

    International Nuclear Information System (INIS)

    Dounaev, V.; Fujita, Y.; Juslin, K.; Haugset, K.; Lux, I.; Naser, J.

    1994-01-01

    Various operator support systems for nuclear power plants are already operational or under development in the IAEA Member States. Operator support systems are based on intelligent data processing and, in addition to plant operation, they are also becoming more important for safety. A key feature of operator support systems is their availability to restructure data to increase its relevance for a given situation. This can improve the user's ability to identify plant mode, system state, and component state and to identify and diagnose faults. Operator support systems can also assist the user in planning and implementing corrective actions to improve the nuclear power plant's availability and safety. In September 1991, the IAEA Committee for Contractual Scientific Services approved the Co-ordinated Research Programme (CRP) on ''Operator Support Systems in Nuclear Power Plants'' in the framework of the Project ''Man-Machine Interface Studies''. The main objective of this programme is to provide guidance and technology transfer for the development and implementation of operator support systems. This includes the experience with human-machine interfaces and closely related issues such as instrumentation and control, the use of computers in nuclear power plants, and operator qualification. (author)

  1. Argentina's operator support systems in nuclear power plants

    International Nuclear Information System (INIS)

    Goldstein, M.; Palamidessi, H.

    1996-01-01

    The development of operator support systems for nuclear power plants started in Argentina a few years ago. Four systems are at present deployed or under development. The participation of utility personnel in the co-ordinated research program has helped in revising the current experience and in selecting and specifying the systems to be developed and the resources needed for their implementation. Main efforts will be aimed to the selection of those systems that can be more easily implemented, to improve the data retrieval and handling, to develop diverse supplies of software products and to promote the understanding of support systems among the potential end users. (author). 12 refs

  2. Support for User Interfaces for Distributed Systems

    Science.gov (United States)

    Eychaner, Glenn; Niessner, Albert

    2005-01-01

    An extensible Java(TradeMark) software framework supports the construction and operation of graphical user interfaces (GUIs) for distributed computing systems typified by ground control systems that send commands to, and receive telemetric data from, spacecraft. Heretofore, such GUIs have been custom built for each new system at considerable expense. In contrast, the present framework affords generic capabilities that can be shared by different distributed systems. Dynamic class loading, reflection, and other run-time capabilities of the Java language and JavaBeans component architecture enable the creation of a GUI for each new distributed computing system with a minimum of custom effort. By use of this framework, GUI components in control panels and menus can send commands to a particular distributed system with a minimum of system-specific code. The framework receives, decodes, processes, and displays telemetry data; custom telemetry data handling can be added for a particular system. The framework supports saving and later restoration of users configurations of control panels and telemetry displays with a minimum of effort in writing system-specific code. GUIs constructed within this framework can be deployed in any operating system with a Java run-time environment, without recompilation or code changes.

  3. Using Visualization in Cockpit Decision Support Systems

    Science.gov (United States)

    Aragon, Cecilia R.

    2005-01-01

    In order to safely operate their aircraft, pilots must make rapid decisions based on integrating and processing large amounts of heterogeneous information. Visual displays are often the most efficient method of presenting safety-critical data to pilots in real time. However, care must be taken to ensure the pilot is provided with the appropriate amount of information to make effective decisions and not become cognitively overloaded. The results of two usability studies of a prototype airflow hazard visualization cockpit decision support system are summarized. The studies demonstrate that such a system significantly improves the performance of helicopter pilots landing under turbulent conditions. Based on these results, design principles and implications for cockpit decision support systems using visualization are presented.

  4. Fault-Tolerant Onboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran

    a crude and simple estimation of the actual sea state (Hs and Tz), information about the longitudinal hull girder loading, seakeeping performance of the ship, and decision support on how to operate the ship within acceptable limits. The system is able to identify critical forthcoming events and to give...... advice regarding speed and course changes to decrease the wave-induced loads. The SeaSense system is based on the combined use of a mathematical model and measurements from a set of sensors. The overall dependability of a shipboard monitoring and decision support system such as the SeaSense system can...

  5. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, Jobke; Hendrix, Ron; van Gemert-Pijnen, Lisette

    2017-01-01

    Background: Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  6. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, M.J.; Hendrix, Ron; van Gemert-Pijnen, Julia E.W.C.

    Background Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  7. How Decision Support Systems Can Benefit from a Theory of Change Approach

    Science.gov (United States)

    Allen, Will; Cruz, Jennyffer; Warburton, Bruce

    2017-06-01

    Decision support systems are now mostly computer and internet-based information systems designed to support land managers with complex decision-making. However, there is concern that many environmental and agricultural decision support systems remain underutilized and ineffective. Recent efforts to improve decision support systems use have focused on enhancing stakeholder participation in their development, but a mismatch between stakeholders' expectations and the reality of decision support systems outputs continues to limit uptake. Additional challenges remain in problem-framing and evaluation. We propose using an outcomes-based approach called theory of change in conjunction with decision support systems development to support both wider problem-framing and outcomes-based monitoring and evaluation. The theory of change helps framing by placing the decision support systems within a wider context. It highlights how decision support systems use can "contribute" to long-term outcomes, and helps align decision support systems outputs with these larger goals. We illustrate the benefits of linking decision support systems development and application with a theory of change approach using an example of pest rabbit management in Australia. We develop a theory of change that outlines the activities required to achieve the outcomes desired from an effective rabbit management program, and two decision support systems that contribute to specific aspects of decision making in this wider problem context. Using a theory of change in this way should increase acceptance of the role of decision support systems by end-users, clarify their limitations and, importantly, increase effectiveness of rabbit management. The use of a theory of change should benefit those seeking to improve decision support systems design, use and, evaluation.

  8. How Decision Support Systems Can Benefit from a Theory of Change Approach.

    Science.gov (United States)

    Allen, Will; Cruz, Jennyffer; Warburton, Bruce

    2017-06-01

    Decision support systems are now mostly computer and internet-based information systems designed to support land managers with complex decision-making. However, there is concern that many environmental and agricultural decision support systems remain underutilized and ineffective. Recent efforts to improve decision support systems use have focused on enhancing stakeholder participation in their development, but a mismatch between stakeholders' expectations and the reality of decision support systems outputs continues to limit uptake. Additional challenges remain in problem-framing and evaluation. We propose using an outcomes-based approach called theory of change in conjunction with decision support systems development to support both wider problem-framing and outcomes-based monitoring and evaluation. The theory of change helps framing by placing the decision support systems within a wider context. It highlights how decision support systems use can "contribute" to long-term outcomes, and helps align decision support systems outputs with these larger goals. We illustrate the benefits of linking decision support systems development and application with a theory of change approach using an example of pest rabbit management in Australia. We develop a theory of change that outlines the activities required to achieve the outcomes desired from an effective rabbit management program, and two decision support systems that contribute to specific aspects of decision making in this wider problem context. Using a theory of change in this way should increase acceptance of the role of decision support systems by end-users, clarify their limitations and, importantly, increase effectiveness of rabbit management. The use of a theory of change should benefit those seeking to improve decision support systems design, use and, evaluation.

  9. Review of Operation and Maintenance Support Systems for Research Reactors

    International Nuclear Information System (INIS)

    Jin, Kyungho; Heo, Gyunyoung; Park, Jaekwan

    2014-01-01

    Operation support systems do not directly control the plant but it can aid decision making itself by obtaining and analyzing large amounts of data. Recently, the demand of research reactor is growing and the need for operation support systems is increasing, but it has not been applied for research reactors. This study analyzes operation and maintenance support systems of NPPs and suggests appropriate systems for research reactors based on analysis. In this paper, operation support systems for research reactors are suggested by comparing with those of power reactors. Currently, research reactors do not cover special systems in order to improve safety and operability in comparison with power reactors. Therefore we expect to improve worth to use by introducing appropriate systems for research reactors. In further research, we will develop an appropriate system such as applications or tools that can be applied to the research reactor

  10. Stability design considerations for mirror support systems in ICF lasers

    International Nuclear Information System (INIS)

    Tietbohl, G.L.; Sommer, S.C.

    1996-10-01

    Some of the major components of laser systems used for Inertial Confinement Fusion (ICF) are the large aperture mirrors which direct the path of the laser. These mirrors are typically supported by systems which consist of mirror mounts, mirror enclosures, superstructures, and foundations. Stability design considerations for the support systems of large aperture mirrors have been developed based on the experience of designing and evaluating similar systems at the Lawrence Livermore National Laboratory (LLNL). Examples of the systems developed at LLNL include Nova, the Petawatt laser, Beamlet, and the National Ignition Facility (NIF). The structural design of support systems of large aperture mirrors has typically been controlled by stability considerations in order for the large laser system to meet its performance requirements for alignment and positioning. This paper will discuss the influence of stability considerations and will provide guidance on the structural design and evaluation of mirror support systems in ICF lasers so that this information can be used on similar systems

  11. Support for Quality Assurance in End-User Systems.

    Science.gov (United States)

    Klepper, Robert; McKenna, Edward G.

    1989-01-01

    Suggests an approach that organizations can take to provide centralized support services for quality assurance in end-user information systems, based on the experiences of a support group at Citicorp Mortgage, Inc. The functions of the support group include user education, software selection, and assistance in testing, implementation, and support…

  12. Intelligent decision support system for operators of the supply ...

    African Journals Online (AJOL)

    Intelligent decision support system for operators of the supply department of oil and gas extracting industry. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... abnormal situations, pre-crash sensing, industrial drilling, decision-making support systems. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  13. Expanding the research area of behavior change support systems

    NARCIS (Netherlands)

    van Gemert-Pijnen, Julia E.W.C.; Reitberger, Wolfgang; Langrial, Sitwat; Ploderer, Bernd; Oinas-Kukkonen, Harri; Berkovsky, Shlomo; Freyne, Jill

    2013-01-01

    The First International Workshop on Behavior Change Support Systems attracted a great research interest. The selected papers focused on abstraction, implementation and evaluation of Behavior Change Support Systems. The workshop is an evidence of how researchers from around the globe have their own

  14. Need for Cost Optimization of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.; Anderson, Grant

    2017-01-01

    As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

  15. Decision support system for containment and release management

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, B [Twente Univ., Enschede (Netherlands). Computer Science Dept.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.).

  16. Decision support system for containment and release management

    International Nuclear Information System (INIS)

    Oosterhuis, B.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.)

  17. Remote mobile communication in safety support system

    International Nuclear Information System (INIS)

    Inagaki, Kanji; Kobayashi, Hiroyuki; Hatanaka, Takahiro; Sakuma, Akira; Fukumoto, Akira; Ikeda, Jun

    1999-01-01

    Safety Support System (SSS) is a computerized operator support system for nuclear power plants, which is now under development. The concept of SSS covers 1) earlier detection of failure symptom and prediction of its influence to the plant operation, 2) improved transparency and robustness of plant control systems, 3) advanced human-machine interface and communication. The authors have been working on the third concept and proposed a remote mobile communication system called Plant Communication System (PCS). PCS aims to realize convenient communication between main control room and other areas such as plant local areas and site offices, using Personal Handyphone System (PHS) and wireless LAN (Local Area Network). PCS can transmit not only data but also graphic displays and dynamic video displays between the main control room and plant local areas. MPEG4 (Moving Picture Experts Group 4) technology is utilized in video data compression and decompression. The authors have developed the special multiplexing unit that connects PHS Cell Stations (CSs) and exiting coaxial cables. Voice recognition and announcement capability is also realized in the system, which enables verbal retrieval of information in the computer systems in the main control room from local areas. (author)

  18. [Habitability and biological life support systems for man].

    Science.gov (United States)

    Gazenko, O G; Grigor'ev, A I; Meleshko, G I; Shepelev, E Ia

    1990-01-01

    This paper discusses general concepts and specific details of the habitability of space stations and planetary bases completely isolated from the Earth for long periods of time. It emphasizes inadequacy of the present-day knowledge about natural conditions that provide a biologically acceptable environment on the Earth as well as lack of information about life support systems as a source of consumables (oxygen, water, food) and a tool for waste management. The habitability of advanced space vehicles is closely related to closed bioregenerative systems used as life support systems.

  19. A review of lateral driver support systems

    NARCIS (Netherlands)

    Tideman, Martijn; van der Voort, Mascha C.; van Arem, Bart; Tillema, Frans; Dailey, D.

    2007-01-01

    Lateral driver support systems have the potential to reduce the number of accidents associated with -both intentional and unintentional -lane departures. Additionally, such systems may increase driving comfort and stimulate a more efficient traffic flow, thereby reducing traffic emissions and the

  20. Evolution of Decision Support Systems Research Field in Numbers

    Directory of Open Access Journals (Sweden)

    Ana-Maria SUDUC

    2010-01-01

    Full Text Available The scientific production in a certain field shows, in great extent, the research interests in that field. Decision Support Systems are a particular class of information systems which are gaining more popularity in various domains. In order to identify the evolution in time of the publications number, authors, subjects, publications in the Decision Support Systems (DSS field, and therefore the scientific world interest for this field, in November 2010 there have been organized a series of queries on three major international scientific databases: ScienceDirect, IEEE Xplore Digital Library and ACM Digital Library. The results presented in this paper shows that, even the decision support systems research field started in 1960s, the interests for this type of systems grew exponentially with each year in the last decades.

  1. Integrated logistic support analysis system

    International Nuclear Information System (INIS)

    Carnicero Iniguez, E.J.; Garcia de la Sen, R.

    1993-01-01

    Integrating logic support into a system results in a large volume of information having to be managed which can only be achieved with the help of computer applications. Both past experience and growing needs in such tasks have led Emperesarios Agrupados to undertake an ambitious development project which is described in this paper. (author)

  2. Theory, Software and Testing Examples for Decision Support Systems

    OpenAIRE

    Lewandowski, A.; Wierzbicki, A.P.

    1987-01-01

    Research in methodology of Decision Support Systems is one of the activities within the System and Decision Sciences Program which was initiated seven years ago and is still in the center of interests of SDS. During these years several methodological approaches and software tools have been developed; among others the DIDAS (Dynamic Interactive Decision Analysis and Support) and SCDAS (Selection Committed Decision Analysis and Support). Both methodologies gained a certain level of popularity a...

  3. Generic Modeling of a Life Support System for Process Technology Comparison

    Science.gov (United States)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

  4. Panorama of Recommender Systems to Support Learning

    NARCIS (Netherlands)

    Drachsler, Hendrik; Verbert, Katrien; Santos, Olga C.; Manouselis, Nikos

    2015-01-01

    This chapter presents an analysis of recommender systems in TechnologyEnhanced Learning along their 15 years existence (2000-2014). All recommender systems considered for the review aim to support educational stakeholders by personalising the learning process. In this meta-review 82 recommender

  5. Nutritional support for the infant's immune system

    NARCIS (Netherlands)

    Niers, L.; Stasse-Wolthuis, M.; Rombouts, F.M.; Rijkers, G.T.

    2007-01-01

    Newborn babies possess a functional but immature immune system as a defense against a world teeming with microorganisms. Breast milk contains a number of biological, active compounds that support the infant's immune system. These include secretory immunoglobulin A (IgA), which confers specific

  6. A SWOT analysis of Planning Support Systems

    NARCIS (Netherlands)

    Vonk, G.; Geertman, S.; Schot, P.P.

    2007-01-01

    Insight into the strengths, weaknesses, opportunities, and threats (SWOT) of planning support systems (PSS) is fragmented between users and system developers. The lack of combined insights blocks development in the right direction and makes potential users hesitant to apply PSS in planning. This

  7. The design of intelligent support systems for nuclear reactor operators

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1992-01-01

    This paper identifies factors relevant to the design of intelligent support systems and their use for the provision of real-time diagnostic information. As such, it constitutes a followup to the state-of-the-art review that was previously published by Bernard and Washio on the utilization of expert systems within the nuclear industry. Some major differences between intelligent-support tools and conventional expert systems are enumerated. In summary, conventional expert systems that encode experimental knowledge in production rules are not suitable vehicle for the creation of operator support systems. The principal difficulty is the need for real-time operation. This in turn means that intelligent support systems will have knowledge bases derived from temporally accurate plant models, inference engines that permit revisions in the search process to accommodate revised data, and man-machine interfaces that do not require any human input. Such systems will be heavily instrumented, and the associated knowledge bases will require a hierarchical organization to emulate human approaches to analysis

  8. A framework for operator support systems for CANDU

    International Nuclear Information System (INIS)

    Lupton, L.R.; Lipsett, J.J.; Shah, R.R.

    1989-11-01

    The size and complexity of nuclear power plants has increased significantly in the last 20 years. There is a general agreement that both plant safety and availability can be enhanced by providing the operator with more operational support if than can be done without overloading him/her with unnecessary information. Recent advances in computer technology provide opportunities for implementing operator support systems that are significantly different from the ones based on the more conventional technologies used in plant control rooms. In particular, artificial intelligence and the related technologies will play a major role in the development of innovative methods for information processing and presentation. Our approach to these technologies is that they must be integrated into the overall management and control philosophy of the plant and are not to be treated as vehicles to implement point solutions. The underlying philosophy behind this approach and the design objectives and goals for the CANDU 3 control centre are discussed in this paper. Operator support systems will integrate into the overall control philosophy by complementing the operator. There is also a role for such systems in assisting the operator to be a situation manager, organizing, managing and planning the running of the plant. Four support systems that incorporate the underlying philosophy are described

  9. A framework for operator support systems for CANDU

    International Nuclear Information System (INIS)

    Lupton, L.R.; Lipsett, J.J.; Shah, R.R.

    1990-01-01

    The size and complexity of nuclear power plants has increased significantly in the last 20 years. There is a general agreement that both plant safety and availability can be enhanced by providing the operator with more operational support if that can be cone without overloading him/her with unnecessary information. Recent advances in computer technology provide opportunities for implementing operator support systems that are significantly different from the ones based on the more conventional technologies used in plant control rooms. In particular, artificial intelligence (AI) and the related technologies will play a major role in the development of innovative methods for information processing and presentation. Our approach to these technologies is that they must be integrated into the overall management and control philosophy of the plant and are not to be treated as vehicles to implement point solutions. The underlying philosophy behind this approach and the design objectives and goals for the CANDU 3 control centre are discussed in this paper. Operator support systems will integrate into the overall controll philosophy by complementing the operator. There is also a role for such systems in assisting the operator be a 'situation manager' organizing, managing and planning the running of the plant. Four support systems that invorporate the underlying philosophy are described

  10. Panorama of recommender systems to support learning

    OpenAIRE

    Drachsler, Hendrik; Verbert, Katrien; Santos, Olga; Manouselis, Nikos

    2015-01-01

    This chapter presents an analysis of recommender systems in Technology-Enhanced Learning along their 15 years existence (2000-2014). All recommender systems considered for the review aim to support educational stakeholders by personalising the learning process. In this meta-review 82 recommender systems from 35 different countries have been investigated and categorised according to a given classification framework. The reviewed systems have been classified into 7 clusters according to their c...

  11. BASIC STUDY ON TAILORMADE BRAKING SUPPORT SYSTEM

    Directory of Open Access Journals (Sweden)

    Toshiya HIROSE, M.S.

    2004-01-01

    This research reviewed the construction of models of a Tailormade Braking Support System (TBSS for braking to stop vehicles and the evaluation of drivers. As a result, the following conclusions were drawn. (1 Braking factors were found to change in the period from the start of braking to stopping; (2 Changes in braking factors can be logically incorporated into the control elements of braking support system; (3 Readymade Driver Model is effective as a model to be incorporated into the base system of TBSS; (4 Tailormade Driver Model built on Neural Network is effective as a main model to construct TBSS; (5 As for TBSS, both subjective and objective ratings on the timing and magnitude of braking are favorable, and its safety and sense of security are improved.

  12. Decision support system to select cover systems

    International Nuclear Information System (INIS)

    Bostick, K.V.

    1995-01-01

    The objective of this technology is to provide risk managers with a defensible, objective way to select capping alternatives for remediating radioactive and mixed waste landfills. The process of selecting containment cover technologies for mixed waste landfills requires consideration of many complex and interrelated technical, regulatory, and economic issues. A Decision Support System (DSS) is needed to integrate the knowledge of experts from scientific, engineering, and management disciplines to help in selecting the best capping practice for the site

  13. Using systems thinking to support clinical system transformation.

    Science.gov (United States)

    Best, Allan; Berland, Alex; Herbert, Carol; Bitz, Jennifer; van Dijk, Marlies W; Krause, Christina; Cochrane, Douglas; Noel, Kevin; Marsden, Julian; McKeown, Shari; Millar, John

    2016-05-16

    Purpose - The British Columbia Ministry of Health's Clinical Care Management initiative was used as a case study to better understand large-scale change (LSC) within BC's health system. Using a complex system framework, the purpose of this paper is to examine mechanisms that enable and constrain the implementation of clinical guidelines across various clinical settings. Design/methodology/approach - Researchers applied a general model of complex adaptive systems plus two specific conceptual frameworks (realist evaluation and system dynamics mapping) to define and study enablers and constraints. Focus group sessions and interviews with clinicians, executives, managers and board members were validated through an online survey. Findings - The functional themes for managing large-scale clinical change included: creating a context to prepare clinicians for health system transformation initiatives; promoting shared clinical leadership; strengthening knowledge management, strategic communications and opportunities for networking; and clearing pathways through the complexity of a multilevel, dynamic system. Research limitations/implications - The action research methodology was designed to guide continuing improvement of implementation. A sample of initiatives was selected; it was not intended to compare and contrast facilitators and barriers across all initiatives and regions. Similarly, evaluating the results or process of guideline implementation was outside the scope; the methods were designed to enable conversations at multiple levels - policy, management and practice - about how to improve implementation. The study is best seen as a case study of LSC, offering a possible model for replication by others and a tool to shape further dialogue. Practical implications - Recommended action-oriented strategies included engaging local champions; supporting local adaptation for implementation of clinical guidelines; strengthening local teams to guide implementation; reducing

  14. A new scenario based approach for designing driver support systems applied to the design of a lane change support system

    NARCIS (Netherlands)

    Tideman, M.; Voort, M.C. van der; Arem, B. van

    2008-01-01

    Designing a new driver support system that meets the expectations of drivers is a difficult and time-consuming process. Despite the availability of various types of design support, it has essentially remained a process in which designers are forced to make assumptions about what other people want.

  15. A new scenario based approach for designing driver support systems applied to the design of a lane change support system

    NARCIS (Netherlands)

    Tideman, Martijn; van der Voort, Mascha C.; van Arem, Bart

    2010-01-01

    Designing a new driver support system that meets the expectations of drivers is a difficult and time-consuming process. Despite the availability of various types of design support, it has essentially remained a process in which designers are forced to make assumptions about what other people want.

  16. System Support for Forensic Inference

    Science.gov (United States)

    Gehani, Ashish; Kirchner, Florent; Shankar, Natarajan

    Digital evidence is playing an increasingly important role in prosecuting crimes. The reasons are manifold: financially lucrative targets are now connected online, systems are so complex that vulnerabilities abound and strong digital identities are being adopted, making audit trails more useful. If the discoveries of forensic analysts are to hold up to scrutiny in court, they must meet the standard for scientific evidence. Software systems are currently developed without consideration of this fact. This paper argues for the development of a formal framework for constructing “digital artifacts” that can serve as proxies for physical evidence; a system so imbued would facilitate sound digital forensic inference. A case study involving a filesystem augmentation that provides transparent support for forensic inference is described.

  17. Operation and maintenance support expert systems for BWR nuclear power plants

    International Nuclear Information System (INIS)

    Miyazawa, Tatsuo; Hayakawa, Hiroyasu; Fukutomi, Shigeki

    1990-01-01

    Toshiba has been developing expert systems for operation and maintenance support in BWRs. These expert systems are designed to be integrated with conventional plant monitoring systems, and maintenance management systems to provide both comprehensive and powerful support capabilities. Some of these expert systems are already being used on a trial basis both within Toshiba and in electric power utility companies. This paper describes expert systems for the support of plant and equipment monitoring, maintenance scheduling, and maintenance work procedure planning. (author)

  18. Support System Model for Value based Group Decision on Roof System Selection

    Directory of Open Access Journals (Sweden)

    Christiono Utomo

    2011-02-01

    Full Text Available A group decision support system is required on a value-based decision because there are different concern caused by differing preferences, experiences, and background. It is to enable each decision-maker to evaluate and rank the solution alternatives before engaging into negotiation with other decision-makers. Stakeholder of multi-criteria decision making problems usually evaluates the alternative solution from different perspective, making it possible to have a dominant solution among the alternatives. Each stakeholder needs to identify the goals that can be optimized and those that can be compromised in order to reach an agreement with other stakeholders. This paper presents group decision model involving three decision-makers on the selection of suitable system for a building’s roof. The objective of the research is to find an agreement options model and coalition algorithms for multi person decision with two main preferences of value which are function and cost. The methodology combines value analysis method using Function Analysis System Technique (FAST; Life Cycle Cost analysis, group decision analysis method based on Analytical Hierarchy Process (AHP in a satisfying options, and Game theory-based agent system to develop agreement option and coalition formation for the support system. The support system bridges theoretical gap between automated design in construction domain and automated negotiation in information technology domain by providing a structured methodology which can lead to systematic support system and automated negotiation. It will contribute to value management body of knowledge as an advanced method for creativity and analysis phase, since the practice of this knowledge is teamwork based. In the case of roof system selection, it reveals the start of the first negotiation round. Some of the solutions are not an option because no individual stakeholder or coalition of stakeholders desires to select it. The result indicates

  19. RTEMS CENTRE- Support and Maintenance CENTRE to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Coutunho, M.; Freitas, D.; Faustino, S.; Mota, M.; Colaço, P.; Zulianello, M.

    2008-08-01

    RTEMS stands for Real-Time Operating System for Multiprocessor Systems. It is a full featured Real Time Operating System that supports a variety of open APIs and interface standards. It provides a high performance environment for embedded applications, including a fixed-priority preemptive/non-preemptive scheduler, a comprehensive set of multitasking operations and a large range of supported architectures. Support and maintenance CENTRE to RTEMS operating system (RTEMS CENTRE) is a joint initiative of ESA-Portugal Task force, aiming to build a strong technical competence in the space flight (on- board) software, to offer support, maintenance and improvements to RTEMS. This paper provides a high level description of the current and future activities of the RTEMS CENTRE. It presents a brief description of the RTEMS operating system, a description of the tools developed and distributed to the community [1] and the improvements to be made to the operating system, including facilitation for the qualification of RTEMS (4.8.0) [2] for the space missions.

  20. Using Visualization in Cockpit Decision Support Systems

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, Cecilia R.

    2005-07-01

    In order to safely operate their aircraft, pilots must makerapid decisions based on integrating and processing large amounts ofheterogeneous information. Visual displays are often the most efficientmethod of presenting safety-critical data to pilots in real time.However, care must be taken to ensure the pilot is provided with theappropriate amount of information to make effective decisions and notbecome cognitively overloaded. The results of two usability studies of aprototype airflow hazard visualization cockpit decision support systemare summarized. The studies demonstrate that such a system significantlyimproves the performance of helicopter pilots landing under turbulentconditions. Based on these results, design principles and implicationsfor cockpit decision support systems using visualization arepresented.

  1. Strategy generator in computerized accident management support system

    International Nuclear Information System (INIS)

    Sirola, M.

    1994-02-01

    An increased interest for research in the field of accident management of nuclear power plants can be noted. Several international programmes have been started in order to be able to understand the basic physical and chemical phenomena in accident conditions. A feasibility study has shown that it would be possible to design and develop a computerized support system for plant staff in accident situations. To achieve this goal the Halden Project has initiated a research programme on Computerized Accident Management Support (CAMS project). The aim is to utilize the capabilities of computerized tools to support the plant staff during the various accident stages. The system will include identification of the accident state, assessment of the future development of the accident and planning of accident mitigation strategies. A prototype is developed to support operators and the Technical Support Centre in decision making during serious accidents in nuclear power plants. A rule based system has been built to take care of the strategy generation. This system assists plant personnel in planning control proposals and mitigation strategies from normal operation to severe accident conditions. The idea of a safety objective tree and knowledge from the emergency procedures have been used. Future prediction requires good state identification of the plant status and some knowledge about the history of some critical variables. The information needs to be validated as well. Accurate calculations in simulators and a large database including all important information from the plant will help the strategy planning. (orig.). (40 refs., 20 figs.)

  2. Structural support system for a superconducting magnet coil

    International Nuclear Information System (INIS)

    Meuser, R.B.

    1977-01-01

    The purpose of the ESCAR (Experimental Superconducting Accelerator Ring) project, now under way at the Lawrence Berkeley Laboratory, is to gather data and experience in the design and operation of a relatively small synchrotron employing superconducting magnets. Such data are essential to ensure that the design of future large accelerators may proceed in a knowledgeable and responsible manner. One of the many engineering problems associated with a superconducting magnet is the design of the coil suspension system. The coil, maintained at the temperature of liquid helium, must be held rigidly by a structure that does not conduct too much heat into the liquid helium system. The suspension system used on the ESCAR magnets is described. Topics covered include the coil support system requirements, ESCAR magnet support system, and operating experience

  3. Supporting multiple control systems at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Nicklaus, Dennis J.; /Fermilab

    2009-10-01

    The Fermilab control system, ACNET, is used for controlling the Tevatron and all of its pre-accelerators. However, other smaller experiments at Fermilab have been using different controls systems, in particular DOOCS and EPICS. This paper reports some of the steps taken at Fermilab to integrate support for these outside systems. We will describe specific tools that we have built or adapted to facilitate interaction between the architectures. We also examine some of the difficulties that arise from managing this heterogeneous environment. Incompatibilities as well as common elements will be described.

  4. Web-Based Group Decision Support System: an Economic Application

    Directory of Open Access Journals (Sweden)

    Ion ISTUDOR

    2010-01-01

    Full Text Available Decision Support Systems (DSS form a specific class of computerized information systems that support business and managerial decision-making activities. Making the right decision in business primarily depends on the quality of data. It also depends on the ability to analyze the data with a view to identifying trends that can suggest solutions and strategies. A “cooperative” decision support system means the data are collected, analyzed and then provided to a human agent who can help the system to revise or refine the data. It means that both a human component and computer component work together to come up with the best solution. This paper describes the usage of a software product (Vanguard System to a specific economic application (evaluating the financial risk assuming that the rate of the economic profitability can be under the value of the interest rate.

  5. Thermal stress analysis of gravity support system for ITER based on ANSYS

    International Nuclear Information System (INIS)

    Liang Shangming; Yan Xijiang; Huang Yufeng; Wang Xianzhou; Hou Binglin; Li Pengyuan; Jian Guangde; Liu Dequan; Zhou Caipin

    2009-01-01

    A method for building the finite element model of the gravity support system for International Thermonuclear Experimental Reactor (ITER) was proposed according to the characteristics of the gravity support system with the cyclic symmetry. A mesh dividing method, which has high precision and an acceptable calculating scale, was used, and a three dimensional finite element model for the toroidal 20 degree sector of the gravity support system was built by using ANSYS. Meantime, the steady-state thermal analysis and thermal-structural coupling analysis of the gravity support system were performed. The thermal stress distributions and the maximal thermal stress values of all parts of the gravity support system were obtained, and the stress intensity of parts of the gravity support system was analyzed. The results of thermal stress analysis lay the solid foundation for design and improvement for gravity supports system for ITER. (authors)

  6. IGENPRO knowledge-based operator support system

    International Nuclear Information System (INIS)

    Morman, J. A.

    1998-01-01

    Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support

  7. iRODS-Based Climate Data Services and Virtualization-as-a-Service in the NASA Center for Climate Simulation

    Science.gov (United States)

    Schnase, J. L.; Duffy, D. Q.; Tamkin, G. S.; Strong, S.; Ripley, D.; Gill, R.; Sinno, S. S.; Shen, Y.; Carriere, L. E.; Brieger, L.; Moore, R.; Rajasekar, A.; Schroeder, W.; Wan, M.

    2011-12-01

    Scientific data services are becoming an important part of the NASA Center for Climate Simulation's mission. Our technological response to this expanding role is built around the concept of specialized virtual climate data servers, repetitive cloud provisioning, image-based deployment and distribution, and virtualization-as-a-service. A virtual climate data server is an OAIS-compliant, iRODS-based data server designed to support a particular type of scientific data collection. iRODS is data grid middleware that provides policy-based control over collection-building, managing, querying, accessing, and preserving large scientific data sets. We have developed prototype vCDSs to manage NetCDF, HDF, and GeoTIF data products. We use RPM scripts to build vCDS images in our local computing environment, our local Virtual Machine Environment, NASA's Nebula Cloud Services, and Amazon's Elastic Compute Cloud. Once provisioned into these virtualized resources, multiple vCDSs can use iRODS's federation and realized object capabilities to create an integrated ecosystem of data servers that can scale and adapt to changing requirements. This approach enables platform- or software-as-a-service deployment of the vCDSs and allows the NCCS to offer virtualization-as-a-service, a capacity to respond in an agile way to new customer requests for data services, and a path for migrating existing services into the cloud. We have registered MODIS Atmosphere data products in a vCDS that contains 54 million registered files, 630TB of data, and over 300 million metadata values. We are now assembling IPCC AR5 data into a production vCDS that will provide the platform upon which NCCS's Earth System Grid (ESG) node publishes to the extended science community. In this talk, we describe our approach, experiences, lessons learned, and plans for the future.

  8. Requirements for the support power systems of CANDU nuclear power plants

    International Nuclear Information System (INIS)

    1990-08-01

    This Standard covers principal criteria and requirements for design, fabrication, installation, qualification, inspection, and documentation for assurance that support power will be available as required. The minimum requirements for support power are determined by the special safety systems and other safety-related systems that must function to ensure that the public health risk is acceptably low. Support power systems of a CANDU nuclear power plant include those parts of the electrical systems and instrument air systems that are necessary for the operation of safety-related systems

  9. Selected Aircraft Throttle Controller With Support Of Fuzzy Expert Inference System

    Directory of Open Access Journals (Sweden)

    Żurek Józef

    2014-12-01

    Full Text Available The paper describes Zlin 143Lsi aircraft engine work parameters control support method – hourly fuel flow as a main factor under consideration. The method concerns project of aircraft throttle control support system with use of fuzzy logic (fuzzy inference. The primary purpose of the system is aircraft performance optimization, reducing flight cost at the same time and support proper aircraft engine maintenance. Matlab Software and Fuzzy Logic Toolbox were used in the project. Work of the system is presented with use of twenty test samples, five of them are presented graphically. In addition, system control surface, included in the paper, supports system all work range analysis.

  10. Implementation of Business Game Activity Support System

    Institute of Scientific and Technical Information of China (English)

    TANABU Motonari

    2004-01-01

    Business game can be used not only as an educational tool for the development of decision making ability, but also can be used for supporting the knowledge creation activity in organizations. In this paper, some conceptual considerations to meanings of the business game in the knowledge creation activity by using the knowledge creation theory and other related theories are given,and business game activity concept which refers to game play and development is proposed. Then focusing on the business game activity as an instantiation of the knowledge creation activity, and a Web based gaming activity support system based on the former system called YBG that enables us to play and develop many business games through the standard web browser is proposed. This system also provides us a lot of opportunities to play and develop the business games over business game communities.

  11. Life Support Systems: Trace Contaminant and Particulate Control

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Trace Contaminant and Particulate Control task: Work in the area of trace contamination and...

  12. Intelligent tactical asset allocation support system

    OpenAIRE

    Hiemstra, Y.

    1995-01-01

    This paper presents an advanced support system for Tactical Asset Allocation. Asset allocation explains over 90% of portfolio performance (Brinson, Hood and Beebower, 1988). Tactical asset allocation adjusts a strategic portfolio on the basis of short term market outlooks. The system includes aprediction model that forecasts quarterly excess returns on the S and PSOO, an optimization model that adjusts a user-specified strategic portfolio on thebasis of the excess return forecast, and a compo...

  13. EPICS device support module as ATCA system manager for the ITER fast plant system controller

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Paulo F., E-mail: pricardofc@ipfn.ist.utl.pt [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal); Santos, Bruno; Gonçalves, Bruno; Carvalho, Bernardo B.; Sousa, Jorge; Rodrigues, A.P.; Batista, António J.N.; Correia, Miguel; Combo, Álvaro [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal); Correia, Carlos M.B.A. [Centro de Instrumentação, Departamento de Física, Universidade de Coimbra, Coimbra (Portugal); Varandas, Carlos A.F. [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal)

    2013-10-15

    Highlights: ► In Nuclear Fusion, demanding security and high-availability requirements call for redundancy to be available. ► ATCA based Nuclear Fusion Systems are composed by several electronic and mechanical component. ► Control and monitoring of ATCA electronic systems are recommended. ► ITER Fast Plant System Controller Project CODAC system prototype. ► EPICS device support module as External ATCA system manager solution. -- Abstract: This paper presents an Enhanced Physics and Industrial Control System (EPICS) device support module for the International Thermonuclear Experimental Reactor (ITER) Fast Plant System Controller (FPSC) project based in Advanced Telecommunications Computing Architecture (ATCA) specification. The developed EPICS device support module provides an External System Manager (ESM) solution for monitoring and control the ITER FPSC ATCA shelf system and data acquisition boards in order to take proper action and report problems to a control room operator or high level management unit in case of any system failure occurrence. EPICS device support module acts as a Channel Access (CA) server to report problems and publish ATCA system data information to the control room operator, high level management unit or other CA network clients such as Control System Studio Operator Interfaces (CSS OPIs), Best Ever Alarm System Toolkit (BEAST), Best Ever Archive Utility (BEAUTY) or other CA client applications. EPICS device support module communicates with the ATCA Shelf manager (ShM) using HTTP protocol to send and receive commands through POST method in order to get and set system and shelf components properties such as fan speeds measurements, temperatures readings, module status and ATCA boards acquisition and configuration parameters. All system properties, states, commands and parameters are available through the EPICS device support module CA server in EPICS Process Variables (PV) and signals format. ATCA ShM receives the HTTP protocol

  14. Importance of Decision Support Systems About Food Safety in Raw Milk Production

    Directory of Open Access Journals (Sweden)

    Ecem Akan

    2015-12-01

    Full Text Available In raw milk production decision support systems for control of food safety hazards has not been developed but main points of this system are available. The decision support systems’ elements include data identification at critical points in the milk supply chain, an information management system and data exchange. Decision supports systems has been developed on the basis of these elements. In dairy sector decision support systems are significant for controlling of food safety hazards and preferred by producers. When these systems are implemented in the milk supply chain, it can be prevented unnecessary sampling and analysis. In this article it will be underlined effects of decision support system elements on food safety of raw milk.

  15. Cloud Computing Application on Transport Dispatching Informational Support Systems

    Directory of Open Access Journals (Sweden)

    Dmitry Olegovich Gusenitsa

    2015-05-01

    Full Text Available Transport dispatching informational support systems has received widespread attention due to high quality information density, strong coherence and applicable visualization features. Nevertheless, because of large volume of data, complex integration requirements and the need for information exchange between different users, time costs of the development and implementation of the informational support systems, problems associated with various data formats compatibility, security protocols and high maintenance cost, the opportunities for the application of such systems are significantly reduced. This article reviews the possibility of creating a cloud storage data system for transport dispatching informational support system (TDIS using modern computer technology to meet the challenges of mass data processing, information security and reduce operational costs. The system is expected to make full use of the advantages offered by the technology of cloud storage. Integrated cloud will increase the amount of data available to the system, reduce the speed processing requirements and reduce the overall cost of system implementation. Creation and integration of cloud storage is one of the most important areas of TDIS development, which is stimulating and promoting the further development of TDIS to ensure the requirements of its users.

  16. Negative surface streamers propagating on TiO2 and γ-Al2O3-supported Ag catalysts: ICCD imaging and modeling study

    Science.gov (United States)

    Kim, Hyun-Ha; Teramoto, Yoshiyuki; Ogata, Atsushi; Kang, Woo Seok; Hur, Min; Song, Young-Hoon

    2018-06-01

    Surface streamers propagating on the surface of titanium dioxide (TiO2) and alumina (γ-Al2O3) were studied in negative polarity using intensified charge coupled device (ICCD) imaging and numerical simulation. Detailed time-resolved ICCD images of cathode-directed streamers (CDSs) emanating from a ground electrode are first presented in this report. Instead of primary streamers in positive polarity, only a glow-like discharge appeared in the early stage at the cathode under negative polarity. After this discharge disappeared, a counter-propagating CDS initiated from the ground electrode (anode). Numerical simulation indicated that strong electric fields at the pellet-anode and the formation of positive ion rich local spots were the main reason for the CDS formation near the ground electrode. The maximum velocity was 750 km s‑1 for Ag-supported γ-Al2O3 and 550 km s‑1 for Ag-supported TiO2, respectively. In contrast to the CDS in the gas-phase with a positive polarity, the CDS in a catalyst packed-bed under negative polarity showed more branching and a larger number of streamers in the presence of oxygen than in pure N2.

  17. The internal design phase of the breeding and multigeneration support system: A tracking and decision support system for NCTR (National Center for Toxicological Research)

    Energy Technology Data Exchange (ETDEWEB)

    Strand, R.; Cox, T.L.; Sjoreen, A.; Alvic, D.

    1989-06-01

    The National Center for Toxicological Research (NCTR) is the basic research arm of the US Food and Drug Administration (FDA). The NCTR has upgraded and standardized its computer operations on Digital Equipment Corporation VAX minicomputers using Software AG's ADABAS data base management system for all research applications. The NCTR is currently performing a large study to improve the functionality of the animal husbandry systems and applications called Breeding/Multigeneration Support System (BMSS). When functional, it will operate on VAX equipment using the ADABAS data base management system, TDMS, and COBOL. Oak Ridge National Laboratory (ORNL) is supporting NCTR in the design, prototyping, and software engineering of the BMSS. This document summarizes the internal design elements that include data structures, file structures, and system attributes that were required to facilitate the decision support requirements defined in the external design work. Prototype pseudocode then was developed for the recommended system attributes and file and data structures. Finally, ORNL described the processing requirements including the initial access of the BMSS, integration of the existing INLIFE system and the STUDY DEFINITION system under development, data system initialization and maintenance, and BMSS testing and verification. This document describes ORNL's recommendations for the internal design of the BMSS. ORNL will provide research support to NCTR in the additional phases of systems life cycle development for BMSS. ORNL has prepared this document according to NCTR's Standard Operating Procedures for Systems Development. 6 figs., 5 tabs.

  18. Decision Support System for Hepatitis Disease Diagnosis using Bayesian Network

    Directory of Open Access Journals (Sweden)

    Shamshad Lakho

    2017-12-01

    Full Text Available Medical judgments are tough and challenging as the decisions are often based on the deficient and ambiguous information. Moreover, the result of decision process has direct effects on human lives. The act of human decision declines in emergency situations due to the complication, time limit, and high risks. Therefore, provision of medical diagnosis plays a dynamic role, specifically in the preliminary stage when a physician has limited diagnosis experience and identifies the directions to be taken for the treatment process. Computerized Decision Support Systems have brought a revolution in the medical diagnosis. These automatic systems support the diagnosticians in the course of diagnosis. The major role of Decision Support Systems is to support the medical personnel in decision-making procedures regarding disease diagnosis and treatment recommendation. The proposed system provides easy support in Hepatitis disease recognition. The system is developed using the Bayesian network model. The physician provides the input to the system in the form of symptoms stated by the patient. These signs and symptoms match with the casual relationships present in the knowledge model. The Bayesian network infers conclusion from the knowledge model and calculates the probability of occurrence of Hepatitis B, C and D disorders.

  19. Adoption of Web-based Group Decision Support Systems: Conditions for Growth

    NARCIS (Netherlands)

    van Hillegersberg, Jos; Koenen, Sebastiaan

    2014-01-01

    While organizations have massively adopted enterprise information systems to support business processes, business meetings in which key decisions are made about products, services and processes are usually held without much support of information systems. This is remarkable as group decision support

  20. IFSS: The IAEA's inspection field support system

    International Nuclear Information System (INIS)

    Muller, R.; Heinonen, O.J.; Schriefer, D.

    1990-01-01

    Recently, highly automated nuclear facilities with enormous volumes of nuclear material accounting data have come into operation. A few others will become operational shortly. Analysis and verification of the data for safeguards purposes is manageable only with improved computer support in the field. To assist its safeguards inspectors, the IAEA has developed the Inspection Field Support System (IFSS). It allows safeguards inspectors to collect, maintain, analyse, and evaluate inspection data on site at nuclear facilities. Previously, field computer support to safeguards inspectors concentrated on providing measurement instrumentation with data storage, but data analysis capabilities were elementary. Also, generic statistical tools were available to handle data that inspectors could (usually manually) input into a computer. Electronic links between these two directions were rudimentary. IFSS integrates the data required for verification and accounting so that inspectors will be able to devote more time to measurements and to derive conclusions at the site in a more timely manner. The system operates on stationary personal computers as well as on portable ones. Its introduction reflects the IAEA Department of Safeguards determination to further improve operational efficiency. It should be emphasized that IFSS implementation is still under development. Several field installations have been made to obtain practical experience and to determine the system's effectiveness

  1. Creating a Structured Support System for Postsecondary Success

    Science.gov (United States)

    White, Carol Cutler

    2018-01-01

    For numerous reasons, it can be difficult for foster youth to succeed in postsecondary education. This chapter offers insight into state-level policies and programs, community college programs dedicating to supporting foster youth, and a framework for creating a structured support system to increase student success.

  2. Impulse: Memory System Support for Scientific Applications

    Directory of Open Access Journals (Sweden)

    John B. Carter

    1999-01-01

    Full Text Available Impulse is a new memory system architecture that adds two important features to a traditional memory controller. First, Impulse supports application‐specific optimizations through configurable physical address remapping. By remapping physical addresses, applications control how their data is accessed and cached, improving their cache and bus utilization. Second, Impulse supports prefetching at the memory controller, which can hide much of the latency of DRAM accesses. Because it requires no modification to processor, cache, or bus designs, Impulse can be adopted in conventional systems. In this paper we describe the design of the Impulse architecture, and show how an Impulse memory system can improve the performance of memory‐bound scientific applications. For instance, Impulse decreases the running time of the NAS conjugate gradient benchmark by 67%. We expect that Impulse will also benefit regularly strided, memory‐bound applications of commercial importance, such as database and multimedia programs.

  3. Pipe support for use in a nuclear system

    International Nuclear Information System (INIS)

    Pollono, L.P.; Mello, R.M.

    1976-01-01

    Description is given of a vertical pipe support system. It comprises a tubular pipe support structure having the same inside diameter and the same wall thickness as the pipe, the pipe support structure having a generally triangularly shaped extension formed integral with and extending circumferentially around its outward side, the bottom side of this extension generally forming a ledge; an annular load-bearing insulation formed adjacent to the extension; means for clamping the load-bearing insulation to extension; and means for providing constant vertical support to means for clamping [fr

  4. Support system of electronic health cards

    Directory of Open Access Journals (Sweden)

    Yu. L. Nechiporenko

    2013-02-01

    Full Text Available Made the survey online sources regarding the specification of functions of systems support electronic medical records. Given the tendency to attract mobile devices to conduct an array of medical data expedient development of EHR, which can be installed on a personal mobile device.

  5. Alternate design of ITER cryostat skirt support system

    International Nuclear Information System (INIS)

    Pandey, Manish Kumar; Gupta, Girish Kumar; Bhardwaj, Anil Kumar; Jha, Saroj Kumar

    2015-01-01

    The skirt support of ITER cryostat is a support system which takes all the load of cryostat cylinder and dome during normal and operational condition. The present design of skirt support has full penetration weld joints at the bottom (shell to horizontal plate joint). To fulfill the requirements of tolerances and control the welding distortions, we have proposed to change the full penetration weld into fillet weld. A detail calculation is done to check the feasibility and structural impact due to proposed design. The calculations provide the size requirements of fillet weld. To verify the structural integrity during most severe load case, finite element analysis (FEA) has been done in line with ASME section VIII division 2. By FEA 'Plastic Collapse' and 'Local Failure' modes has been assessed. 5° sector of skirt clamp has been modeled in CATIA V5 R21 and used in FEA. Fillet weld at shell to horizontal plate joint has been modeled and symmetry boundary condition at ± 2.5° applied. 'Elastic Plastic Analysis' has been performed for the most severe loading case i.e. Category IV loading. The alternate design of Cryostat Skirt support system has been found safe by analysis against Plastic collapse and Local Failure Modes with load proportionality factor 2.3. Alternate design of Cryostat skirt support system has been done and validated by FEA. As per alternate design, the proposal of fillet weld has been implemented in manufacturing. (author)

  6. MIT-Skywalker: considerations on the Design of a Body Weight Support System.

    Science.gov (United States)

    Gonçalves, Rogério Sales; Krebs, Hermano Igo

    2017-09-06

    To provide body weight support during walking and balance training, one can employ two distinct embodiments: support through a harness hanging from an overhead system or support through a saddle/seat type. This paper presents a comparison of these two approaches. Ultimately, this comparison determined our selection of the body weight support system employed in the MIT-Skywalker, a robotic device developed for the rehabilitation/habilitation of gait and balance after a neurological injury. Here we will summarize our results with eight healthy subjects walking on the treadmill without any support, with 30% unloading supported by a harness hanging from an overhead system, and with a saddle/seat-like support system. We compared the center of mass as well as vertical and mediolateral trunk displacements across different walking speeds and support. The bicycle/saddle system had the highest values for the mediolateral inclination, while the overhead harness body weight support showed the lowest values at all speeds. The differences were statistically significant. We selected the bicycle/saddle system for the MIT-Skywalker. It allows faster don-and-doff, better centers the patient to the split treadmill, and allows all forms of training. The overhead harness body weight support might be adequate for rhythmic walking training but limits any potential for balance training.

  7. Computerised decision support systems for healthcare professionals: an interpretative review

    Directory of Open Access Journals (Sweden)

    Kathrin Cresswell

    2013-03-01

    Full Text Available Purpose Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted.Methods We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997–2010. The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations.Results Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits.Conclusions Whilst the potential of clinical decision support systems in improving, in particular

  8. Computerised decision support systems for healthcare professionals: an interpretative review.

    Science.gov (United States)

    Cresswell, Kathrin; Majeed, Azeem; Bates, David W; Sheikh, Aziz

    2012-01-01

    Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted. We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997-2010). The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS) Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations. Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits. Whilst the potential of clinical decision support systems in improving, in particular, practitioner performance is considerable, such technology may

  9. The Systems Engineering Process for Human Support Technology Development

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    Systems engineering is designing and optimizing systems. This paper reviews the systems engineering process and indicates how it can be applied in the development of advanced human support systems. Systems engineering develops the performance requirements, subsystem specifications, and detailed designs needed to construct a desired system. Systems design is difficult, requiring both art and science and balancing human and technical considerations. The essential systems engineering activity is trading off and compromising between competing objectives such as performance and cost, schedule and risk. Systems engineering is not a complete independent process. It usually supports a system development project. This review emphasizes the NASA project management process as described in NASA Procedural Requirement (NPR) 7120.5B. The process is a top down phased approach that includes the most fundamental activities of systems engineering - requirements definition, systems analysis, and design. NPR 7120.5B also requires projects to perform the engineering analyses needed to ensure that the system will operate correctly with regard to reliability, safety, risk, cost, and human factors. We review the system development project process, the standard systems engineering design methodology, and some of the specialized systems analysis techniques. We will discuss how they could apply to advanced human support systems development. The purpose of advanced systems development is not directly to supply human space flight hardware, but rather to provide superior candidate systems that will be selected for implementation by future missions. The most direct application of systems engineering is in guiding the development of prototype and flight experiment hardware. However, anticipatory systems engineering of possible future flight systems would be useful in identifying the most promising development projects.

  10. Field Support System (FS-AID) and Working Capital Fund Tracking System (WCF-TS)

    Data.gov (United States)

    US Agency for International Development — The Field Support System (FS-AID) and Working Capital Fund Tracking System (WCF-TS) are two modules of a single data management system that share common tables and...

  11. Integrated training support system for PWR operator training simulator

    International Nuclear Information System (INIS)

    Sakaguchi, Junichi; Komatsu, Yasuki

    1999-01-01

    The importance of operator training using operator training simulator has been recognized intensively. Since 1986, we have been developing and providing many PWR simulators in Japan. We also have developed some training support systems connected with the simulator and the integrated training support system to improve training effect and to reduce instructor's workload. This paper describes the concept and the effect of the integrated training support system and of the following sub-systems. We have PES (Performance Enhancement System) that evaluates training performance automatically by analyzing many plant parameters and operation data. It can reduce the deviation of training performance evaluation between instructors. PEL (Parameter and Event data Logging system), that is the subset of PES, has some data-logging functions. And we also have TPES (Team Performance Enhancement System) that is used aiming to improve trainees' ability for communication between operators. Trainee can have conversation with virtual trainees that TPES plays automatically. After that, TPES automatically display some advice to be improved. RVD (Reactor coolant system Visual Display) displays the distributed hydraulic-thermal condition of the reactor coolant system in real-time graphically. It can make trainees understand the inside plant condition in more detail. These sub-systems have been used in a training center and have contributed the improvement of operator training and have gained in popularity. (author)

  12. Theoretical and Experimental Impact Analysis of Decision Support Systems for Advanced MCR Operators

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Seong, Poong Hyun

    2008-01-01

    Human error is recognized as one of the main causes of nuclear power plant (NPP) accidents, and there have been efforts to reduce and prevent human errors by developing various operator support systems. Before adapting these support systems to actual NPPs, it is necessary to validate their reliability and to evaluate their effect on operator performance. Particularly for safety-critical systems such as NPPs, the validation and evaluation of support systems is as important as the design of good systems. Such evaluations may be carried out through a theoretical modelling or experimentation. The objective of this study is to investigate the effects of decision support systems on operator performance by both theoretical and experimental methods. The target system is an integrated decision support system including four decision support sub-systems. In the results of both the theoretical and experimental evaluations, the decision support systems revealed positive effects, and several trends were observed. (authors)

  13. Theoretical and Experimental Impact Analysis of Decision Support Systems for Advanced MCR Operators

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Jun [Korea Atomic Energy Research Institute, 1045 Daedeok-daero, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of); Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Guseong-dong, Yuseong-gu, Daejeon, 305-703 (Korea, Republic of)

    2008-07-01

    Human error is recognized as one of the main causes of nuclear power plant (NPP) accidents, and there have been efforts to reduce and prevent human errors by developing various operator support systems. Before adapting these support systems to actual NPPs, it is necessary to validate their reliability and to evaluate their effect on operator performance. Particularly for safety-critical systems such as NPPs, the validation and evaluation of support systems is as important as the design of good systems. Such evaluations may be carried out through a theoretical modelling or experimentation. The objective of this study is to investigate the effects of decision support systems on operator performance by both theoretical and experimental methods. The target system is an integrated decision support system including four decision support sub-systems. In the results of both the theoretical and experimental evaluations, the decision support systems revealed positive effects, and several trends were observed. (authors)

  14. Design and realization of tourism spatial decision support system based on GIS

    Science.gov (United States)

    Ma, Zhangbao; Qi, Qingwen; Xu, Li

    2008-10-01

    In this paper, the existing problems of current tourism management information system are analyzed. GIS, tourism as well as spatial decision support system are introduced, and the application of geographic information system technology and spatial decision support system to tourism management and the establishment of tourism spatial decision support system based on GIS are proposed. System total structure, system hardware and software environment, database design and structure module design of this system are introduced. Finally, realization methods of this systemic core functions are elaborated.

  15. Decisions at hand: a decision support system on handhelds.

    Science.gov (United States)

    Zupan, B; Porenta, A; Vidmar, G; Aoki, N; Bratko, I; Beck, J R

    2001-01-01

    One of the applications of clinical information systems is decision support. Although the advantages of utilizing such aids have never been theoretically disputed, they have been rarely used in practice. The factor that probably often limits the utility of clinical decision support systems is the need for computing power at the very site of decision making--at the place where the patient is interviewed, in discussion rooms, etc. The paper reports on a possible solution to this problem. A decision-support shell LogReg is presented, which runs on a handheld computer. A general schema for handheld-based decision support is also proposed, where decision models are developed on personal computers/workstations, encoded in XML and then transferred to handhelds, where the models are used within a decision support shell. A use case where LogReg has been applied to clinical outcome prediction in crush injury is presented.

  16. Page 93 - 99.pmd

    African Journals Online (AJOL)

    Administrator

    Department of Public Health, Faculty of Life Sciences, Hamburg University of Applied Sciences, Hamburg,. Germany. 3. ... about the running of the system. ... inflexible since it did not rapidly respond to emerging .... standard registry for sending and receiving times of ... agreed that the Khartoum CDSS is a flexible system.

  17. Transmission market support system

    International Nuclear Information System (INIS)

    Reinschmidt, K.F.; Coles, B.C.

    1995-01-01

    An interactive, computer-based market support system has been developed for transmission access that is efficient, equitable, and fair to all parties concerned with electrical transmission: utilities, electric generators, owners of transmission networks, and wholesale purchasers of electrical power. Each participant transmits electronically to the computer system his proposed price schedule for buying, selling, or transmitting power for each future time period. The price for transmission on a single line in one direction can differ from the price in the other direction. The total quantity offered in the transmission bid represents the capacity of the line, and the flow on the line cannot exceed this value. The system automatically computes the prices that clear the market; that is, the price that each generator receives at each bus, the price that each transmission operator receives on each line, and the price that each customer pays at each bus. The computer system maximizes the benefits to all three classes while satisfying the electrical characteristics of the transmission system by means of load flow calculations. Customers never pay more than their bid prices (but may pay less), and generators and transmission operators never receive less than their bid prices (but may receive more). The price at each bus applies to all buyers and sellers at that bus: all buyers at the same bus pay the same price and all generators at a bus receive the same price

  18. A methodology for system-of-systems design in support of the engineering team

    Science.gov (United States)

    Ridolfi, G.; Mooij, E.; Cardile, D.; Corpino, S.; Ferrari, G.

    2012-04-01

    Space missions have experienced a trend of increasing complexity in the last decades, resulting in the design of very complex systems formed by many elements and sub-elements working together to meet the requirements. In a classical approach, especially in a company environment, the two steps of design-space exploration and optimization are usually performed by experts inferring on major phenomena, making assumptions and doing some trial-and-error runs on the available mathematical models. This is done especially in the very early design phases where most of the costs are locked-in. With the objective of supporting the engineering team and the decision-makers during the design of complex systems, the authors developed a modelling framework for a particular category of complex, coupled space systems called System-of-Systems. Once modelled, the System-of-Systems is solved using a computationally cheap parametric methodology, named the mixed-hypercube approach, based on the utilization of a particular type of fractional factorial design-of-experiments, and analysis of the results via global sensitivity analysis and response surfaces. As an applicative example, a system-of-systems of a hypothetical human space exploration scenario for the support of a manned lunar base is presented. The results demonstrate that using the mixed-hypercube to sample the design space, an optimal solution is reached with a limited computational effort, providing support to the engineering team and decision makers thanks to sensitivity and robustness information. The analysis of the system-of-systems model that was implemented shows that the logistic support of a human outpost on the Moon for 15 years is still feasible with currently available launcher classes. The results presented in this paper have been obtained in cooperation with Thales Alenia Space—Italy, in the framework of a regional programme called STEPS. STEPS—Sistemi e Tecnologie per l'EsPlorazione Spaziale is a research

  19. Alternate seismic support for pipeline systems in nuclear power plants

    International Nuclear Information System (INIS)

    Muthumani, K.; Gopalakrishnan, N.; Sathish Kumar, K.; Sreekala, R.; Rama Rao, G.V.; Reddy, G.R.; Parulekar, Y.M.

    2008-01-01

    Failure free design of supporting systems for pipe lines carrying highly toxic or radioactive liquids at very high temperature is an important issue in the safety aspect for a nuclear power plant installation which is a key topic for researchers all around the world. Generally, these pipeline systems are designed to be held rigid by conventional snubber supports for protection from earthquakes. The piping design must balance seismic deformations and other deformations due to thermal effect. A rigid pipeline system using conventional snubber supports always leads to an increase in thermal stresses; hence a rational seismic design for pipeline supporting systems becomes essential. Contrary to this rigid design, it is possible to design a flexible pipeline system and to decrease the seismic response by increasing the damping through the use of passive energy absorbing elements, which dissipate vibration energy. This paper presents the experimental and analytical studies carried out on modeling yielding type elasto-plastic passive energy-absorbing elements to be used in a passive energy-dissipating device for the control of large seismic deformations of pipelines subjected to earthquake loading. (author)

  20. Automation bias: empirical results assessing influencing factors.

    Science.gov (United States)

    Goddard, Kate; Roudsari, Abdul; Wyatt, Jeremy C

    2014-05-01

    To investigate the rate of automation bias - the propensity of people to over rely on automated advice and the factors associated with it. Tested factors were attitudinal - trust and confidence, non-attitudinal - decision support experience and clinical experience, and environmental - task difficulty. The paradigm of simulated decision support advice within a prescribing context was used. The study employed within participant before-after design, whereby 26 UK NHS General Practitioners were shown 20 hypothetical prescribing scenarios with prevalidated correct and incorrect answers - advice was incorrect in 6 scenarios. They were asked to prescribe for each case, followed by being shown simulated advice. Participants were then asked whether they wished to change their prescription, and the post-advice prescription was recorded. Rate of overall decision switching was captured. Automation bias was measured by negative consultations - correct to incorrect prescription switching. Participants changed prescriptions in 22.5% of scenarios. The pre-advice accuracy rate of the clinicians was 50.38%, which improved to 58.27% post-advice. The CDSS improved the decision accuracy in 13.1% of prescribing cases. The rate of automation bias, as measured by decision switches from correct pre-advice, to incorrect post-advice was 5.2% of all cases - a net improvement of 8%. More immediate factors such as trust in the specific CDSS, decision confidence, and task difficulty influenced rate of decision switching. Lower clinical experience was associated with more decision switching. Age, DSS experience and trust in CDSS generally were not significantly associated with decision switching. This study adds to the literature surrounding automation bias in terms of its potential frequency and influencing factors. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  1. Unmanned systems to support the human exploration of Mars

    Science.gov (United States)

    Gage, Douglas W.

    2010-04-01

    Robots and other unmanned systems will play many critical roles in support of a human presence on Mars, including surveying candidate landing sites, locating ice and mineral resources, establishing power and other infrastructure, performing construction tasks, and transporting equipment and supplies. Many of these systems will require much more strength and power than exploration rovers. The presence of humans on Mars will permit proactive maintenance and repair, and allow teleoperation and operator intervention, supporting multiple dynamic levels of autonomy, so the critical challenges to the use of unmanned systems will occur before humans arrive on Mars. Nevertheless, installed communications and navigation infrastructure should be able to support structured and/or repetitive operations (such as excavation, drilling, or construction) within a "familiar" area with an acceptable level of remote operator intervention. This paper discusses some of the factors involved in developing and deploying unmanned systems to make humans' time on Mars safer and more productive, efficient, and enjoyable.

  2. A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

    Energy Technology Data Exchange (ETDEWEB)

    Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

    2015-03-01

    A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

  3. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  4. Advanced intelligent computational technologies and decision support systems

    CERN Document Server

    Kountchev, Roumen

    2014-01-01

    This book offers a state of the art collection covering themes related to Advanced Intelligent Computational Technologies and Decision Support Systems which can be applied to fields like healthcare assisting the humans in solving problems. The book brings forward a wealth of ideas, algorithms and case studies in themes like: intelligent predictive diagnosis; intelligent analyzing of medical images; new format for coding of single and sequences of medical images; Medical Decision Support Systems; diagnosis of Down’s syndrome; computational perspectives for electronic fetal monitoring; efficient compression of CT Images; adaptive interpolation and halftoning for medical images; applications of artificial neural networks for real-life problems solving; present and perspectives for Electronic Healthcare Record Systems; adaptive approaches for noise reduction in sequences of CT images etc.

  5. A spatial decision support system for pipe-break susceptibility ...

    African Journals Online (AJOL)

    lying properties. Existing decision support systems available in the field of water distribution system maintenance mainly focus on leak detection and pipe rehabilitation/replacement strategies. These existing systems, however, do not address the ...

  6. Decission Support System (DSS dalam Auditing Untuk Apa Digunakan

    Directory of Open Access Journals (Sweden)

    Priyono Puji Prasetyo

    2015-12-01

    Full Text Available Komputer semakin sering digunakan pada kantor akuntan. Tidak hanya digunakan untuk menggantikan kegiatan yang bersifat manual, tetapi juga sebagai alat bantu bagi akuntan dalam pengambilan keputusan. Keputusan yang dibuat dengan dukungan (decision support sistem komputer ini diharapkan tidak hanya akan lebih efisien, tetapi juga lebih efektif dalam mencapai tujuan. Konsekuensi-nya, bantuan semacam itu memperoleh dukungan yang luas untuk digunakan dalam auditing dan bidang pekerjaan lainnya. Apa yang menyebabkan Decision Support System (DSS digunakan adalah kemampuannya membantu akuntan dalam proses pembuatan keputusan audit. Alat ini perlu dipergunakan oleh akuntan karena profesi akuntansi berhadapan dengan pasar yang semakin besar, saingan yang lebih ketat serta tekanan hukum, sehingga auditor independen dituntut untuk mengembangkan kualitas pelayanan audit dengan harga yang lebih kompetitif.Tulisan ini bertujuan untuk membahas penggunaan Decision Support System (DSS dalam auditing. Pembahasan akan dimulai dengan sejarah perkembangan komputer yang kemudian disusul dengan uraian tentang decision support system (DSS. Uraian yang agak luas mengenai penggunaan DSS dalam auditing diberikan pada seksi berikutnya. Berdasarkan uraian mengenai DSS tersebut akan diberikan kesimpulan untuk mengakhiri tulisan ini.

  7. MPI support in the DIRAC Pilot Job Workload Management System

    International Nuclear Information System (INIS)

    Tsaregorodtsev, A; Hamar, V

    2012-01-01

    Parallel job execution in the grid environment using MPI technology presents a number of challenges for the sites providing this support. Multiple flavors of the MPI libraries, shared working directories required by certain applications, special settings for the batch systems make the MPI support difficult for the site managers. On the other hand the workload management systems with Pilot Jobs became ubiquitous although the support for the MPI applications in the Pilot frameworks was not available. This support was recently added in the DIRAC Project in the context of the GISELA Latin American Grid Initiative. Special services for dynamic allocation of virtual computer pools on the grid sites were developed in order to deploy MPI rings corresponding to the requirements of the jobs in the central task queue of the DIRAC Workload Management System. Pilot Jobs using user space file system techniques install the required MPI software automatically. The same technique is used to emulate shared working directories for the parallel MPI processes. This makes it possible to execute MPI jobs even on the sites not supporting them officially. Reusing so constructed MPI rings for execution of a series of parallel jobs increases dramatically their efficiency and turnaround. In this contribution we describe the design and implementation of the DIRAC MPI Service as well as its support for various types of MPI libraries. Advantages of coupling the MPI support with the Pilot frameworks are outlined and examples of usage with real applications are presented.

  8. EUPHIDS, a decision-support system for the admission of pesticides

    NARCIS (Netherlands)

    Beinat E; Berg R van den; Vrije Universiteit van; Fraunhofer Institue for Environmental Chemistry; International Centre of Pesticide Safety, Busto; LBG

    1996-01-01

    EUPHIDS (EUropean Pesticide Hazard Information and Decision-support System) is the result of a research project carried out during 1993-1995 with the support of the Environment Research Programme (1990-1994) of the European Union. The system is meant to become an aid in the process of registering a

  9. Intelligent Case Based Decision Support System for Online Diagnosis of Automated Production System

    International Nuclear Information System (INIS)

    Ben Rabah, N; Saddem, R; Carre-Menetrier, V; Ben Hmida, F; Tagina, M

    2017-01-01

    Diagnosis of Automated Production System (APS) is a decision-making process designed to detect, locate and identify a particular failure caused by the control law. In the literature, there are three major types of reasoning for industrial diagnosis: the first is model-based, the second is rule-based and the third is case-based. The common and major limitation of the first and the second reasonings is that they do not have automated learning ability. This paper presents an interactive and effective Case Based Decision Support System for online Diagnosis (CB-DSSD) of an APS. It offers a synergy between the Case Based Reasoning (CBR) and the Decision Support System (DSS) in order to support and assist Human Operator of Supervision (HOS) in his/her decision process. Indeed, the experimental evaluation performed on an Interactive Training System for PLC (ITS PLC) that allows the control of a Programmable Logic Controller (PLC), simulating sensors or/and actuators failures and validating the control algorithm through a real time interactive experience, showed the efficiency of our approach. (paper)

  10. Multiple excitation of supports - Part 2 : Implementation in TUBO system

    International Nuclear Information System (INIS)

    Galeao, A.C.N.R.; Barbosa, H.J.C.

    1980-12-01

    From the formulation of multiple excitation support problem, discussed in the first part of this work, and with the use of numerical techniques presented there, we discuss in this second part, the implementation in TUBO system, the follow procedure: Direct integration, Modal overlap, Spectral response emphasizing the aspects related to supports excitation. Finally, we present two numerical examples of TUBO system utilization in the solution of support movement problem. The several implemented computational procedures are compared. (E.G.) [pt

  11. QA CLASSIFICATION ANALYSIS OF GROUND SUPPORT SYSTEMS

    International Nuclear Information System (INIS)

    D. W. Gwyn

    1996-01-01

    The purpose and objective of this analysis is to determine if the permanent function Ground Support Systems (CI: BABEEOOOO) are quality-affecting items and if so, to establish the appropriate Quality Assurance (QA) classification

  12. STARS - Supportability Trend Analysis and Reporting System for the National Space Transportation System

    Science.gov (United States)

    Graham, Leroy J.; Doempke, Gerald T.

    1990-01-01

    The concept, implementation, and long-range goals of a Supportability Trend Analysis and Reporting System (STARS) for the National Space Transportation System (NSTS) are discussed. The requirement was established as a direct result of the recommendations of the Rogers Commission investigation of the circumstances of the Space Shuttle Challenger accident. STARS outlines the requirements for the supportability-trend data collection, analysis, and reporting requirements that each of the project offices supporting the Space Shuttle are required to provide to the NSTS program office. STARS data give the historic and predictive logistics information necessary for all levels of NSTS management to make safe and cost-effective decisions concerning the smooth flow of Space Shuttle turnaround.

  13. Credit default swaps and risk-shifting

    NARCIS (Netherlands)

    Campello, M.; Matta, R.

    2012-01-01

    Credit default swaps (CDSs) are thought to ease borrowing by protecting lenders against default. This paper develops a model of the demand for CDS when borrowers choose the riskiness of investment and verification is imperfect. The model shows that CDSs may lead to risk-shifting, increasing the

  14. Study on the Support Systems for Corporate Governance

    Directory of Open Access Journals (Sweden)

    Claudiu BRANDAS

    2011-01-01

    Full Text Available The problems generated by the information asymmetry within the agency relationships at corporation level, governments and capital markets led to a higher necessity for corporate governance (CG. The information system of corporate governance is a very complex one, which involves a series of actors, decision-making and transactional processes, technologies, procedures and good practice codes. In order to ensure the efficiency and efficacy of corporate governance as a premise for increasing company’s performance and position consolidation for the company on the capital market, it is necessary to analyze the way information technology could contribute to this undertaking. The purpose of this study is to analyze the architecture of the corporate governance systems and to identify and classify the systems and technologies involved in ensuring CG support in order to underlie the basis for developing a conceptual model for a hybrid and collaborative support system for corporate governance.

  15. Intelligent systems supporting the control room operators

    International Nuclear Information System (INIS)

    Berger, E.

    1997-01-01

    The operational experience obtained with the various applications of the systems discussed in this paper shows that more consequent use of the systems will make detection and management of disturbances still more efficient and faster. This holds true both for a low level of process automation and for power plants with a high level of automation. As for conventional power plants, the trend clearly is towards higher degrees of automation and consequent application of supporting systems. Thus, higher availability and rapid failure management are achieved, at low effects on normal operation. These systems are monitoring and process control systems, expert systems, and systems for optimal use of the equipment, or systems for post-incident analyses and computer-assisted on-shift protocols, or operating manuals. (orig./CB) [de

  16. Complexity in electronic negotiation support systems.

    Science.gov (United States)

    Griessmair, Michele; Strunk, Guido; Vetschera, Rudolf; Koeszegi, Sabine T

    2011-10-01

    It is generally acknowledged that the medium influences the way we communicate and negotiation research directs considerable attention to the impact of different electronic communication modes on the negotiation process and outcomes. Complexity theories offer models and methods that allow the investigation of how pattern and temporal sequences unfold over time in negotiation interactions. By focusing on the dynamic and interactive quality of negotiations as well as the information, choice, and uncertainty contained in the negotiation process, the complexity perspective addresses several issues of central interest in classical negotiation research. In the present study we compare the complexity of the negotiation communication process among synchronous and asynchronous negotiations (IM vs. e-mail) as well as an electronic negotiation support system including a decision support system (DSS). For this purpose, transcripts of 145 negotiations have been coded and analyzed with the Shannon entropy and the grammar complexity. Our results show that negotiating asynchronically via e-mail as well as including a DSS significantly reduces the complexity of the negotiation process. Furthermore, a reduction of the complexity increases the probability of reaching an agreement.

  17. ATCA Shelf Manager EPICS device support for ITER CODAC Core System

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Bruno, E-mail: bsantos@ipfn.ist.utl.pt [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal); Carvalho, Paulo F.; Rodrigues, A.P.; Carvalho, Bernardo B.; Sousa, Jorge; Batista, António J.N.; Correia, Miguel; Combo, Álvaro M.; Cruz, Nuno [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal); Correia, Carlos M.B.A. [Centro de Instrumentação, Departamento de Física, Universidade de Coimbra, 3004-516 Coimbra (Portugal); Gonçalves, Bruno [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal)

    2015-10-15

    Highlights: • This architecture targets the health management integration into the NDS. • The developed solution supports the ShM redundancy features, specified by ATCA. • The average RTT was around 59 ms and in 99.9% of the cases was less than 130 ms. • Without losing any update cycle, can monitor a system shelf with approximately 400 sensors. • This solution enables the user to configure the entire system in DB files and st.cmd. - Abstract: The ITER CODAC Core System (CCS) is responsible for plant Instrumentation and Control (I&C) supervising and monitoring. This system uses the Enhanced Physics and Industrial Control System (EPICS) Channel Access (CA) protocol as the interface with the Plant Operation Network (PON). This paper presents a generic EPICS device support developed for the integration of the ATCA Shelf Manager (ShM) into the ITER CCS, providing scalability and easy configuration. The device support uses the available HTTP interface on Shelf Manager in the communication layer. Both HTTP server and sensors/actuators definitions can be configured using the EPICS database file and the Input/Output Controller (IOC) initialization file. A proposal based on this device is also presented, targeting the Nominal Device Support (NDS) for health management. The EPICS device support running in an IOC provides Process Variables (PV) to the PON network with the system information and these PVs can be used by all CA clients, such as EPICS user interface clients, alarm systems and archive systems. Operation with redundant ATCA ShMs and device support scalability tests were performed and the results are presented.

  18. Refurbishment of the IEAR1 primary coolant system piping supports

    International Nuclear Information System (INIS)

    Fainer, Gerson; Faloppa, Altair A.; Oliveira, Carlos A. de; Mattar Neto, Miguel

    2015-01-01

    A partial replacement of the IEA-R1 piping system was concluded in 2014. This paper presents the study and the structural analysis of the IEA-R1 primary circuit piping supports, considering all the changes involved in the replacement. The IEA-R1 is a nuclear reactor for research purposes designed by Babcox-Willcox that is operated by IPEN since 1957. The reactor life management and modernization program is being conducted for the last two decades and already resulted in a series of changes, especially on the reactor coolant system. This set of components, divided in primary and secondary circuit, is responsible for the circulation of water into the core to remove heat. In the ageing management program that includes regular inspection, some degradation was observed in the primary piping system. As result, the renewing of the piping system was conducted in 2014. Moreover the poor condition of some original piping supports gave rise to the refurbishment of all piping supports. The aim of the present work is to review the design of the primary system piping supports taking into account the current conditions after the changes and refurbishment. (author)

  19. Considering Intermittent Dormancy in an Advanced Life Support Systems Architecture

    Science.gov (United States)

    Sargusingh, Miriam J.; Perry, Jay L.

    2017-01-01

    Many advanced human space exploration missions being considered by the National Aeronautics and Space Administration (NASA) include concepts in which in-space systems cycle between inhabited and uninhabited states. Managing the life support system (LSS) may be particularly challenged during these periods of intermittent dormancy. A study to identify LSS management challenges and considerations relating to dormancy is described. The study seeks to define concepts suitable for addressing intermittent dormancy states and to evaluate whether the reference LSS architectures being considered by the Advanced Exploration Systems (AES) Life Support Systems Project (LSSP) are sufficient to support this operational state. The primary focus of the study is the mission concept considered to be the most challenging-a crewed Mars mission with an extensive surface stay. Results from this study are presented and discussed.

  20. Development of emergency operator support system for next Japanese PWR plants

    International Nuclear Information System (INIS)

    Ito, K.; Hanada, S.; Yoshida, Y.; Sugino, K.

    2006-01-01

    The purpose of main control room improvement is to reduce operator workload and potential human errors by offering a better working environment where operators can maximize their abilities. Japanese PWR utilities and Mitsubishi have developed an operator support system entitled Emergency Operator Support System (EOSS). The system supports operators in incidental/accidental situations which may be worsened by human errors. In order to confirm the validity of the system, a proto type was built, and was evaluated by operator crews. The consequence showed good result of effectiveness in avoiding potential human errors and decreasing workload of operators. (authors)

  1. GIS-based spatial decision support system for grain logistics management

    Science.gov (United States)

    Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

    2010-07-01

    Grain logistics is the important component of the social logistics, which can be attributed to frequent circulation and the great quantity. At present time, there is no modern grain logistics distribution management system, and the logistics cost is the high. Geographic Information Systems (GIS) have been widely used for spatial data manipulation and model operations and provide effective decision support through its spatial database management capabilities and cartographic visualization. In the present paper, a spatial decision support system (SDSS) is proposed to support policy makers and to reduce the cost of grain logistics. The system is composed of two major components: grain logistics goods tracking model and vehicle routing problem optimization model and also allows incorporation of data coming from external sources. The proposed system is an effective tool to manage grain logistics in order to increase the speed of grain logistics and reduce the grain circulation cost.

  2. Identifying Opportunities for Decision Support Systems in Support of Regional Resource Use Planning: An Approach Through Soft Systems Methodology.

    Science.gov (United States)

    Zhu; Dale

    2000-10-01

    / Regional resource use planning relies on key regional stakeholder groups using and having equitable access to appropriate social, economic, and environmental information and assessment tools. Decision support systems (DSS) can improve stakeholder access to such information and analysis tools. Regional resource use planning, however, is a complex process involving multiple issues, multiple assessment criteria, multiple stakeholders, and multiple values. There is a need for an approach to DSS development that can assist in understanding and modeling complex problem situations in regional resource use so that areas where DSSs could provide effective support can be identified, and the user requirements can be well established. This paper presents an approach based on the soft systems methodology for identifying DSS opportunities for regional resource use planning, taking the Central Highlands Region of Queensland, Australia, as a case study.

  3. Using a group decision support system to make investment prioritisation decisions

    OpenAIRE

    Read, Martin; Gear, Tony; Minkes, Leonard; Irving, Ann

    2013-01-01

    This paper is concerned with how decision making groups involved in making investment prioritisation decisions involving funding of technology and science projects may be supported by a group decision support system (GDSS). While interested in decision outcomes, the primary focus of this paper is the role of a group support system as an aid to developing shared understanding within a group. The paper develops the conceptual framework of decision-making, communication and group support, and de...

  4. ERP System Audit a Control Support For Knowledge Management

    Directory of Open Access Journals (Sweden)

    Traian SURCEL

    2008-01-01

    Full Text Available The ERP system supports most of the business system that maintains in a single database the data needed for a variety of business functions such as Manufacturing, SCM, Financials, Projects, Human Resources and CRM; the audit of this systems is necessary in order to give reasonable assurance to the company on its core system. Obtained evidence evaluation can ensure whether the organization's IT&C system safeguard assets, maintains data integrity, and is operating effectively and efficiently to achieve the organization's goals or objectives. The audit process respecting the methodology based on: gathering information and plan; obtaining an understanding of internal controls; performing test of controls and substantive tests, develop a control support on quality of flow of information and knowledge from formal perspective, for Knowledge Management in large enterprises.

  5. A decision support system for on-line leakage localization

    OpenAIRE

    Meseguer, Jordi; Mirats-Tur, Josep M.; Cembrano, Gabriela; Puig, Vicenç; Quevedo, Joseba; Pérez, Ramon; Sanz, Gerard; Ibarra, David

    2014-01-01

    This paper describes a model-driven decision-support system (software tool) implementing a model-based methodology for on-line leakage detection and localization which is useful for a large class of water distribution networks. Since these methods present a certain degree of complexity which limits their use to experts, the proposed software tool focuses on the integration of a method emphasizing its use by water network managers as a decision support system. The proposed software tool integr...

  6. 'RECASS'. Radioecological analysis support system

    International Nuclear Information System (INIS)

    Shershakov, V.

    1998-01-01

    The RECASS is developed as a computer system designed for radiation monitoring and decision-making support in a nuclear emergency. The RECASS system has excellent capabilities for collecting, storing, and presenting data from the radiological situation of contaminated areas. It is well designed for modeling radionuclide migration in the environmental media and for assessing countermeasures in terms of doses received by population groups as a result of radioactive contamination. For RECASS to be used as a basis for solving the problems of radioecological analysis, it is essential that mapping facilities are provided and that scaling capabilities allow data to be presented with the necessary degree of detail and accuracy. Because of the on-line links with the operating network of radiological monitoring, RECASS is capable of collecting meteorological and radiological data from across the country and storing this information in its databases. The availability of data from the network of radiological monitoring makes it possible to develop RECASS as a real-time emergency response system. (R.P.)

  7. The concept of information support system for operational personnel of operating NPPs

    International Nuclear Information System (INIS)

    Dunaev, V.G.; Golovanov, V.V.

    1993-01-01

    The paper has been prepared on the materials of the concept developed by the order of ''Rosenergoatom'' concern. In the present paper the main definitions, the principal objectives and functions of the operator support system (OSS) are stated, a brief analysis of operation features of some existing operator information systems is presented, the main trends of development of operator information support system are given, the way and the sequence for implementation of the systems for operating NPPs are reviewed. In this proposed concept in the first place are considered the information support systems for the operators of the power unit main control rooms, however, the presented principles may be applied while designing information support systems for operators of other control rooms of NPP. 4 refs

  8. An intelligent operator support system for dynamic positioning

    NARCIS (Netherlands)

    Diggelen, J. van; Broek, J. van den; Schraagen, J.M.C.; Waa, J.S. van der

    2018-01-01

    This paper proposes a human-centered approach to Dynamic Position-ing systems which combines multiple technologies in an intelligent operator sup-port system (IOSS). IOSS allows the operator to be roaming and do other tasks in quiet conditions. When conditions become more demanding, the IOSS calls

  9. System for supporting operator's cognitive activity in the decision-making process

    International Nuclear Information System (INIS)

    Gieci, A.

    1992-01-01

    New views upon the formation of a system of means for an efficient support of the operator are presented. The development of a system to promote cognitive activities at the Nuclear Power Plants Research Institute is outlined. As the major issues, changes in the operator's working environment and the starting model of the working situation during stress are briefly described. The fundamental elements of the supporting system under development, which constitute its didactical and engineering-cognitive basis, are explained. The suitability of using expert system technology in this supporting system is substantiated. A particular example of expert counselling of the NPPO-TINA type (Nuclear Power Plant Operation - Transparent Inference Architecture) is reported. (Z.S.). 5 figs., 6 refs

  10. Decision support systems for recovery of endangered species

    International Nuclear Information System (INIS)

    Armstrong, C.E.

    1995-01-01

    The listing of a species as endangered under the Endangered Species Act invokes a suite of responses to help improve conditions for the recovery of that species, to include identification of stressors contributing to population loss, decision analysis of the impacts of proposed recovery options, and implementation of optimal recovery measures. The ability of a decision support system to quantify inherent stressor uncertainties and to identify the key stressors that can be controlled or eliminated becomes key to ensuring the recovery of an endangered species. The listing of the Snake River sockeye, spring/summer chinook, and fall chinook salmon species in the Snake River as endangered provides a vivid example of the importance of sophisticated decision support systems. Operational and physical changes under consideration at eight of the hydroelectric dams along the Columbia and Lower Snake River pose significant financial impacts to a variety of stakeholders involved in the salmon population recovery process and carry significant uncertainties of outcome. A decision support system is presented to assist in the identification of optimal recovery actions for this example that includes the following: creation of datamarts of information on environmental, engineering, and ecological values that influence species survival; incorporation of decision analysis tools to determine optimal decision policies; and the use of geographic information systems (GIS) to provide a context for decision analysis and to communicate the impacts of decision policies

  11. Decision support system for surface irrigation design

    OpenAIRE

    Gonçalves, José M.; Pereira, L.S.

    2009-01-01

    The SADREG decision support system was developed to help decision makers in the process of design and selection of farm surface irrigation systems to respond to requirements of modernization of surface irrigation—furrow, basin, and border irrigation. It includes a database, simulation models, user-friendly interfaces, and multicriteria analysis models. SADREG is comprised of two components: design and selection. The first component applies database information, and through several si...

  12. Building consensus in strategic decision-making : system dynamics as a group support system

    NARCIS (Netherlands)

    Vennix, J.A.M.

    1995-01-01

    System dynamics was originally founded as a method for modeling and simulating the behavior of industrial systems. In recent years it is increasingly employed as a Group Support System for strategic decision-making groups. The model is constructed in direct interaction with a management team, and

  13. The bottom-supported fast reactor - system simplifications and enhanced safety

    International Nuclear Information System (INIS)

    Petrozelli, J.; Golan, S.; Kawamura, Yutaka; Kumaoka, Yoshio; Nakagawa, Hiroshi

    1992-01-01

    The 600-MW(electric) bottom-supported fast reactor (BSFR) incorporates the following key features: (1) modular upper internal structure (UIS); (2) electromagnetic pumps (EMPs); (3) low-sodium-void-worth metal-fuel core; and (4) bottom supported reactor vessel (BSRV), which is entirely supported by the basement, except for the control rods, control rod drives (CRDs), UIS, and the stationary plug; by comparison, a top-supported reactor vessel (TSRV) is completely supported by the operating floor. The diameter of the reactor vessel (RV) is 12.8 m (42 ft), and the height (distance from the basemat to the operating floor) is 19.8 m (65 ft). The RV is supported by a single support cylinder anchored to the basemat. The core has 210 driver assemblies and 192 radial blanket assemblies in an annular configuration. The primary heat transport system components consist of four intermediate heat exchangers (IHXs), four EMPs, and four primary reactor auxillary cooling systems. All these components are supported by the BSRV and hang from their tops. Six modular, vertically movable UIS mechanisms clear the UIS from the space over the core during refueling. The top closure is designed to operate at the reactor outlet temperature and is free to expand and contract. Small bellows between the top closure and each UIS model accommodate differential movements and comprise a portion of the cover gas boundary. A 1200-MW(electric) plant with two 600-MW(electric) (twin) nuclear steam supply systems is being studied

  14. Comparison of multiple support excitation solution techniques for piping systems

    International Nuclear Information System (INIS)

    Sterkel, H.P.; Leimbach, K.R.

    1980-01-01

    Design and analysis of nuclear power plant piping systems exposed to a variety of dynamic loads often require multiple support excitation analysis by modal or direct time integration methods. Both methods have recently been implemented in the computer program KWUROHR for static and dynamic analysis of piping systems, following the previous implementation of the multiple support excitation response spectrum method (see papers K 6/15 and K 6/15a of the SMiRT-4 Conference). The results of multiple support excitation response spectrum analyses can be examined by carrying out the equivalent time history analyses which do not distort the time phase relationship between the excitations at different support points. A frequent point of discussion is multiple versus single support excitation. A single support excitation analysis is computationally straightforward and tends to be on the conservative side, as the numerical results show. A multiple support excitation analysis, however, does not incur much more additional computer cost than the expenditure for an initial static solution involving three times the number, L, of excitation levels, i.e. 3L static load cases. The results are more realistic than those from a single support excitation analysis. A number of typical nuclear plant piping systems have been analyzed using single and multiple support excitation algorithms for: (1) the response spectrum method, (2) the modal time history method via the Wilson, Newmark and Goldberg integration operators and (3) the direct time history method via the Wilson integration operator. Characteristic results are presented to compare the computational quality of all three methods. (orig.)

  15. Ubiquitous-severance hospital project: implementation and results.

    Science.gov (United States)

    Chang, Bung-Chul; Kim, Nam-Hyun; Kim, Young-A; Kim, Jee Hea; Jung, Hae Kyung; Kang, Eun Hae; Kang, Hee Suk; Lee, Hyung Il; Kim, Yong Ook; Yoo, Sun Kook; Sunwoo, Ilnam; An, Seo Yong; Jeong, Hye Jeong

    2010-03-01

    The purpose of this study was to review an implementation of u-Severance information system with focus on electronic hospital records (EHR) and to suggest future improvements. Clinical Data Repository (CDR) of u-Severance involved implementing electronic medical records (EMR) as the basis of EHR and the management of individual health records. EHR were implemented with service enhancements extending to the clinical decision support system (CDSS) and expanding the knowledge base for research with a repository for clinical data and medical care information. The EMR system of Yonsei University Health Systems (YUHS) consists of HP integrity superdome servers using MS SQL as a database management system and MS Windows as its operating system. YUHS is a high-performing medical institution with regards to efficient management and customer satisfaction; however, after 5 years of implementation of u-Severance system, several limitations with regards to expandability and security have been identified.

  16. Real-time decision support and information gathering system for financial domain

    Science.gov (United States)

    Tseng, Chiu-Che; Gmytrasiewicz, Piotr J.

    2006-05-01

    The challenge of the investment domain is that a large amount of diverse information can be potentially relevant to an investment decision, and that, frequently, the decisions have to be made in a timely manner. This presents the potential for better decision support, but poses the challenge of building a decision support agent that gathers information from different sources and incorporates it for timely decision support. These problems motivate us to investigate ways in which the investors can be equipped with a flexible real-time decision support system to be practical in time-critical situations. The flexible real-time decision support system considers a tradeoff between decision quality and computation cost. For this purpose, we propose a system that uses the object oriented Bayesian knowledge base (OOBKB) design to create a decision model at the most suitable level of detail to guide the information gathering activities, and to produce an investment recommendation within a reasonable length of time. The decision models our system uses are implemented as influence diagrams. We validate our system with experiments in a simplified investment domain. The experiments show that our system produces a quality recommendation under different urgency situations. The contribution of our system is that it provides the flexible decision recommendation for an investor under time constraints in a complex environment.

  17. Design of JRR-4 operation Supporting System

    International Nuclear Information System (INIS)

    Takahashi, Hiroki; Arai, Nobuyoshi; Yamamoto, Kazuyoshi; Yoritsune, Tsutomu

    1999-01-01

    A work on the Japan Research Reactor No. 4 (JRR-4) core modification from high-enriched fuels to low-enriched ones was started in 1996 and completed in May 1998. As a part of the work, Operation Supporting System (OSS) was adopted for the purpose of reducing load of operator, preventing operator's error and supplying operation data to users. As the result of adopting this system, integrated monitoring, automation of part of reactor operation and data management were realized. In addition, the cooling control system was compacted. (author)

  18. TECHNOLOGICAL DEVELOPMENT OF DRIVING SUPPORT SYSTEMS BASED ON HUMAN BEHAVIORAL CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Shunichi DOI

    2006-01-01

    Full Text Available Driving support and cruise assist systems are of growing importance in achieving both road traffic safety and convenience. Such driver support seeks to achieve, with the highest possible quality, nothing less than “driver-vehicle symbiosis under all conditions.” At the same time, many traffic accidents result from improper driver behavior. The author focuses on driver behavior under various driving conditions, conducting detailed measurement and analysis of visual perception and attention characteristics as well as perceptual characteristics involved in driving. The aim in doing so is to support research on driving support systems and driving workload reduction technologies that function as human-vehicle systems and take such characteristics into account.

  19. Engineering and management of IT-based service systems an intelligent decision-making support systems approach

    CERN Document Server

    Gomez, Jorge; Garrido, Leonardo; Perez, Francisco

    2014-01-01

    Intelligent Decision-Making Support Systems (i-DMSS) are specialized IT-based systems that support some or several phases of the individual, team, organizational or inter-organizational decision making process by deploying some or several intelligent mechanisms. This book pursues the following academic aims: (i) generate a compendium of quality theoretical and applied contributions in Intelligent Decision-Making Support Systems (i-DMSS) for engineering and management IT-based service systems (ITSS); (ii)  diffuse scarce knowledge about foundations, architectures and effective and efficient methods and strategies for successfully planning, designing, building, operating, and evaluating i-DMSS for ITSS, and (iii) create an awareness of, and a bridge between ITSS and i-DMSS academicians and practitioners in the current complex and dynamic engineering and management ITSS organizational. The book presents a collection of 11 chapters referring to relevant topics for both IT service systems and i-DMSS including: pr...

  20. Defense Contract Management Command Support to System Acquisition Program Managers

    National Research Council Canada - National Science Library

    1999-01-01

    .... This report discusses the planning of contract administration office support to system acquisition program managers through the program integration process and the customer support outreach program...

  1. Decommissioning support system, using RFID and USN

    International Nuclear Information System (INIS)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K.

    2012-01-01

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  2. A Mechanized Decision Support System for Academic Scheduling.

    Science.gov (United States)

    1986-03-01

    an operational system called software. The first step in the development phase is Design . Designers destribute software control by factoring the Data...SUBJECT TERMS (Continue on reverse if necessary and identify by block number) ELD GROUP SUB-GROUP Scheduling, Decision Support System , Software Design ...scheduling system . It will also examine software - design techniques to identify the most appropriate method- ology for this problem. " - Chapter 3 will

  3. Information security requirements in patient-centred healthcare support systems.

    Science.gov (United States)

    Alsalamah, Shada; Gray, W Alex; Hilton, Jeremy; Alsalamah, Hessah

    2013-01-01

    Enabling Patient-Centred (PC) care in modern healthcare requires the flow of medical information with the patient between different healthcare providers as they follow the patient's treatment plan. However, PC care threatens the stability of the balance of information security in the support systems since legacy systems fall short of attaining a security balance when sharing their information due to compromises made between its availability, integrity, and confidentiality. Results show that the main reason for this is that information security implementation in discrete legacy systems focused mainly on information confidentiality and integrity leaving availability a challenge in collaboration. Through an empirical study using domain analysis, observations, and interviews, this paper identifies a need for six information security requirements in legacy systems to cope with this situation in order to attain the security balance in systems supporting PC care implementation in modern healthcare.

  4. Applications of system dynamics modelling to support health policy.

    Science.gov (United States)

    Atkinson, Jo-An M; Wells, Robert; Page, Andrew; Dominello, Amanda; Haines, Mary; Wilson, Andrew

    2015-07-09

    The value of systems science modelling methods in the health sector is increasingly being recognised. Of particular promise is the potential of these methods to improve operational aspects of healthcare capacity and delivery, analyse policy options for health system reform and guide investments to address complex public health problems. Because it lends itself to a participatory approach, system dynamics modelling has been a particularly appealing method that aims to align stakeholder understanding of the underlying causes of a problem and achieve consensus for action. The aim of this review is to determine the effectiveness of system dynamics modelling for health policy, and explore the range and nature of its application. A systematic search was conducted to identify articles published up to April 2015 from the PubMed, Web of Knowledge, Embase, ScienceDirect and Google Scholar databases. The grey literature was also searched. Papers eligible for inclusion were those that described applications of system dynamics modelling to support health policy at any level of government. Six papers were identified, comprising eight case studies of the application of system dynamics modelling to support health policy. No analytic studies were found that examined the effectiveness of this type of modelling. Only three examples engaged multidisciplinary stakeholders in collective model building. Stakeholder participation in model building reportedly facilitated development of a common 'mental map' of the health problem, resulting in consensus about optimal policy strategy and garnering support for collaborative action. The paucity of relevant papers indicates that, although the volume of descriptive literature advocating the value of system dynamics modelling is considerable, its practical application to inform health policy making is yet to be routinely applied and rigorously evaluated. Advances in software are allowing the participatory model building approach to be extended to

  5. A decision support system for forensic entomology

    OpenAIRE

    Morvan , Gildas; Jolly , Daniel; Dupont , Daniel; Kubiak , Philippe

    2007-01-01

    International audience; This paper presents a multiagent-based model of insect development on a dead body and a three layers Decision Support System architecture able to perform retrodictive (abductive) reasoning from multiagent-based models or more generally, complex systems models. This architecture is used in order to compute post-mortem intervals from entomological data sampled on cadavers. Knowing the exact time of a death is fundamental in criminal investigations. Thus, it is necessary ...

  6. A dashboard-based system for supporting diabetes care.

    Science.gov (United States)

    Dagliati, Arianna; Sacchi, Lucia; Tibollo, Valentina; Cogni, Giulia; Teliti, Marsida; Martinez-Millana, Antonio; Traver, Vicente; Segagni, Daniele; Posada, Jorge; Ottaviano, Manuel; Fico, Giuseppe; Arredondo, Maria Teresa; De Cata, Pasquale; Chiovato, Luca; Bellazzi, Riccardo

    2018-05-01

    To describe the development, as part of the European Union MOSAIC (Models and Simulation Techniques for Discovering Diabetes Influence Factors) project, of a dashboard-based system for the management of type 2 diabetes and assess its impact on clinical practice. The MOSAIC dashboard system is based on predictive modeling, longitudinal data analytics, and the reuse and integration of data from hospitals and public health repositories. Data are merged into an i2b2 data warehouse, which feeds a set of advanced temporal analytic models, including temporal abstractions, care-flow mining, drug exposure pattern detection, and risk-prediction models for type 2 diabetes complications. The dashboard has 2 components, designed for (1) clinical decision support during follow-up consultations and (2) outcome assessment on populations of interest. To assess the impact of the clinical decision support component, a pre-post study was conducted considering visit duration, number of screening examinations, and lifestyle interventions. A pilot sample of 700 Italian patients was investigated. Judgments on the outcome assessment component were obtained via focus groups with clinicians and health care managers. The use of the decision support component in clinical activities produced a reduction in visit duration (P ≪ .01) and an increase in the number of screening exams for complications (P < .01). We also observed a relevant, although nonstatistically significant, increase in the proportion of patients receiving lifestyle interventions (from 69% to 77%). Regarding the outcome assessment component, focus groups highlighted the system's capability of identifying and understanding the characteristics of patient subgroups treated at the center. Our study demonstrates that decision support tools based on the integration of multiple-source data and visual and predictive analytics do improve the management of a chronic disease such as type 2 diabetes by enacting a successful

  7. Intelligent Flight Support System (IFSS): A Real-time Intelligent Decision Support Prototype, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The integration of the analysis tools with the advanced visualization capabilities in The Intelligent Flight Support System (IFSS) can provide a unique method for...

  8. An information system supporting design for reliability and maintenance

    International Nuclear Information System (INIS)

    Rit, J.F.; Beraud, M.T.

    1997-01-01

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.)

  9. An information system supporting design for reliability and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Rit, J.F.; Beraud, M.T

    1997-12-31

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.) 10 refs.

  10. Prediction of Banking Systemic Risk Based on Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Shouwei Li

    2013-01-01

    Full Text Available Banking systemic risk is a complex nonlinear phenomenon and has shed light on the importance of safeguarding financial stability by recent financial crisis. According to the complex nonlinear characteristics of banking systemic risk, in this paper we apply support vector machine (SVM to the prediction of banking systemic risk in an attempt to suggest a new model with better explanatory power and stability. We conduct a case study of an SVM-based prediction model for Chinese banking systemic risk and find the experiment results showing that support vector machine is an efficient method in such case.

  11. Optimal support systems for patients with stomas – an opinion piece

    Directory of Open Access Journals (Sweden)

    Burch J

    2014-06-01

    Full Text Available Jennie BurchSt Marks Hospital, Surgery, London, UKAbstract: Coping with a stoma is physically and emotionally difficult. This adaptation process can be hindered by various factors, including complications associated with the stoma, such as appliance leakage, and comorbidities, such as arthritis. There are many ways of learning to live successfully with a stoma, which may be influenced by family, health care professionals, and spiritual support. There is some evidence that a good social support network can result in a positive coping mechanism for people with a newly formed stoma. Difficulty in accepting the stoma has been shown to slow down the adaptation process. This article explores the basic issues related to stomas and the general preoperative and postoperative support that is supplied by health care professionals. There was no optimal support system protocol discovered in the review of the literature. However, some of the published data related to stoma care were extrapolated to enable the reader to understand the important role that support systems can play in the acceptance of the stoma. Health care professionals provide support in a variety of ways, including the provision of telephone advice, clinics, and “open days”, to assist the patient to come to terms with their newly formed stoma. Care includes training on the practical aspects of the stoma, supporting empowerment and self-efficacy of people with a stoma (ostomates, and providing assistance when problems arise. Other support systems that are available are support groups, which may be local or national. It can be seen that the adaptation process takes many months or longer, but by utilizing various means of support, people with a stoma can have a good quality of life. The optimal support systems for patients with a stoma are discussed in relation to the literature and the personal experience of the author.Keywords: colostomy, ileostomy, urostomy

  12. System for Selection of Relevant Information for Decision Support

    Czech Academy of Sciences Publication Activity Database

    Kalina, Jan; Seidl, L.; Zvára, K.; Grünfeldová, H.; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    Roč. 1, č. 1 (2013), s. 46-46 ISSN 1805-8698. [EFMI 2013 Special Topic Conference. 17.04.2013-19.04.2013, Prague] Institutional support: RVO:67985807 Keywords : decision support system * web-service * information extraction * high-dimension * gene expressions Subject RIV: IN - Informatics, Computer Science

  13. 75 FR 76757 - Licensing Support System Advisory Review Panel

    Science.gov (United States)

    2010-12-09

    ... provide advice on the fundamental issues of design and development of an electronic information management... the disposal of high-level radioactive waste, and on the operation and maintenance of the system. This electronic information management system was known as the Licensing Support System (LSS). In November, 1998...

  14. Development of a support software system for real-time HAL/S applications

    Science.gov (United States)

    Smith, R. S.

    1984-01-01

    Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

  15. Modem: data exchange among decision support systems

    International Nuclear Information System (INIS)

    Baig, S.; Zaehringer, M.

    2003-01-01

    The aim of the European Research and Development project MODEM (Monitoring Data and Information Exchange Among Decision Support Systems) is to achieve practical improvements for data exchange among decision support systems (DSS). Hence, the results of model calculations become comparable. This is a precondition for harmonised decision making. Based on the analysis of existing procedures, it was decided to use the PUSH-PULL concept. Notifications are actively and automatically sent by the DSS (PUSH). The data can then be downloaded form an in-formation server (PULL). The format of the data is defined in XML (extended markup language). Participants of the project are the DSS: RODOS, ARGOS and RECASS. First, the data is comprised of the source term and meteorological information. Results of the prognoses and measurement data are also to be exchanged. Exercises testing and improving the pro-cedures form an integral part of the project. (orig.)

  16. An Integrated Web-based Decision Support System in Disaster Risk Management

    Science.gov (United States)

    Aye, Z. C.; Jaboyedoff, M.; Derron, M. H.

    2012-04-01

    Nowadays, web based decision support systems (DSS) play an essential role in disaster risk management because of their supporting abilities which help the decision makers to improve their performances and make better decisions without needing to solve complex problems while reducing human resources and time. Since the decision making process is one of the main factors which highly influence the damages and losses of society, it is extremely important to make right decisions at right time by combining available risk information with advanced web technology of Geographic Information System (GIS) and Decision Support System (DSS). This paper presents an integrated web-based decision support system (DSS) of how to use risk information in risk management efficiently and effectively while highlighting the importance of a decision support system in the field of risk reduction. Beyond the conventional systems, it provides the users to define their own strategies starting from risk identification to the risk reduction, which leads to an integrated approach in risk management. In addition, it also considers the complexity of changing environment from different perspectives and sectors with diverse stakeholders' involvement in the development process. The aim of this platform is to contribute a part towards the natural hazards and geosciences society by developing an open-source web platform where the users can analyze risk profiles and make decisions by performing cost benefit analysis, Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) with the support of others tools and resources provided. There are different access rights to the system depending on the user profiles and their responsibilities. The system is still under development and the current version provides maps viewing, basic GIS functionality, assessment of important infrastructures (e.g. bridge, hospital, etc.) affected by landslides and visualization of the impact

  17. 30 CFR 75.209 - Automated Temporary Roof Support (ATRS) systems.

    Science.gov (United States)

    2010-07-01

    ... of temporary support shall be used, as specified in the roof control plan, when— (1) Mining... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automated Temporary Roof Support (ATRS) systems... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75.209...

  18. 45 CFR 307.25 - Review and certification of computerized support enforcement systems.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED SUPPORT ENFORCEMENT SYSTEMS § 307.25 Review and certification of computerized support enforcement systems. The Office will review, assess and inspect the... 45 Public Welfare 2 2010-10-01 2010-10-01 false Review and certification of computerized support...

  19. Relational Algebra in Spatial Decision Support Systems Ontologies.

    Science.gov (United States)

    Diomidous, Marianna; Chardalias, Kostis; Koutonias, Panagiotis; Magnita, Adrianna; Andrianopoulos, Charalampos; Zimeras, Stelios; Mechili, Enkeleint Aggelos

    2017-01-01

    Decision Support Systems (DSS) is a powerful tool, for facilitates researchers to choose the correct decision based on their final results. Especially in medical cases where doctors could use these systems, to overcome the problem with the clinical misunderstanding. Based on these systems, queries must be constructed based on the particular questions that doctors must answer. In this work, combination between questions and queries would be presented via relational algebra.

  20. Development of the decision make supporting system on incident management

    International Nuclear Information System (INIS)

    Kasamatsu, Mizuki; Hanada, Satoshi; Noda, Eisuke

    2017-01-01

    Decision Make Supporting System is designed to support appropriate decision made by top management in the nuclear severe conditions. With crisis response in nuclear power plant (NPP), information entanglement between sites and control centers during intense situations interfere with prompt and accurate decision making. This research started with that kind of background. In order to solve the issue of the information entanglement, Mitsubishi Heavy Industries, Inc. (MHI) carried out the development of the Decision Make Supporting System and the system applies the technology combining the human factors engineering (HFE) and information and communication technology (ICT). During the crisis response, various commands, reactions and communications in a human system need to be managed. Therefore, the combined HFE method including detailed task analysis, user experience (UX), graphic user interface (GUI) and related human-system interface (HSI) design method is applied to the design of the system. These design results systematize the functions that prevent interference with decision-making in the headquarters for incident management. This new solution as a system enhances the safety improvement of the NPP and contributes to develop the skills and abilities of the resources in the NPP. The system has three key features for supporting emergency situations: 'understanding the situation', 'planning the next action', and 'managing resources'. The system helps commanders and responders to grasp the whole situation and allows them to share information in real time to get a whole picture, and the system accumulates the data of the past events in the chronological order to understand correctly how they happened and plan the next action by using a knowledge database that MHI has been developed. If the unexpected event happens which are not in the incident scenario, the system provides support to formulate alternative strategies and measures. With this

  1. Global Combat Support System - Army Increment 2 (GCSS-A Inc 2)

    Science.gov (United States)

    2016-03-01

    2016 Major Automated Information System Annual Report Global Combat Support System - Army Increment 2 (GCSS-A Inc 2) Defense Acquisition...Secretary of Defense PB - President’s Budget RDT&E - Research, Development, Test, and Evaluation SAE - Service Acquisition Executive TBD - To Be...Date Assigned: Program Information Program Name Global Combat Support System - Army Increment 2 (GCSS-A Inc 2) DoD Component Army Responsible

  2. Advanced Modular Power Approach to Affordable, Supportable Space Systems

    Science.gov (United States)

    Oeftering, Richard C.; Kimnach, Greg L.; Fincannon, James; Mckissock,, Barbara I.; Loyselle, Patricia L.; Wong, Edmond

    2013-01-01

    Recent studies of missions to the Moon, Mars and Near Earth Asteroids (NEA) indicate that these missions often involve several distinct separately launched vehicles that must ultimately be integrated together in-flight and operate as one unit. Therefore, it is important to see these vehicles as elements of a larger segmented spacecraft rather than separate spacecraft flying in formation. The evolution of large multi-vehicle exploration architecture creates the need (and opportunity) to establish a global power architecture that is common across all vehicles. The Advanced Exploration Systems (AES) Modular Power System (AMPS) project managed by NASA Glenn Research Center (GRC) is aimed at establishing the modular power system architecture that will enable power systems to be built from a common set of modular building blocks. The project is developing, demonstrating and evaluating key modular power technologies that are expected to minimize non-recurring development costs, reduce recurring integration costs, as well as, mission operational and support costs. Further, modular power is expected to enhance mission flexibility, vehicle reliability, scalability and overall mission supportability. The AMPS project not only supports multi-vehicle architectures but should enable multi-mission capability as well. The AMPS technology development involves near term demonstrations involving developmental prototype vehicles and field demonstrations. These operational demonstrations not only serve as a means of evaluating modular technology but also provide feedback to developers that assure that they progress toward truly flexible and operationally supportable modular power architecture.

  3. Operator support system using computational intelligence techniques

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio; Pereira, Iraci Martinez

    2015-01-01

    Computational Intelligence Systems have been widely applied in Monitoring and Fault Detection Systems in several processes and in different kinds of applications. These systems use interdependent components ordered in modules. It is a typical behavior of such systems to ensure early detection and diagnosis of faults. Monitoring and Fault Detection Techniques can be divided into two categories: estimative and pattern recognition methods. The estimative methods use a mathematical model, which describes the process behavior. The pattern recognition methods use a database to describe the process. In this work, an operator support system using Computational Intelligence Techniques was developed. This system will show the information obtained by different CI techniques in order to help operators to take decision in real time and guide them in the fault diagnosis before the normal alarm limits are reached. (author)

  4. Operator support system using computational intelligence techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Elaine Inacio, E-mail: ebueno@ifsp.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia de Sao Paulo (IFSP), Sao Paulo, SP (Brazil); Pereira, Iraci Martinez, E-mail: martinez@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Computational Intelligence Systems have been widely applied in Monitoring and Fault Detection Systems in several processes and in different kinds of applications. These systems use interdependent components ordered in modules. It is a typical behavior of such systems to ensure early detection and diagnosis of faults. Monitoring and Fault Detection Techniques can be divided into two categories: estimative and pattern recognition methods. The estimative methods use a mathematical model, which describes the process behavior. The pattern recognition methods use a database to describe the process. In this work, an operator support system using Computational Intelligence Techniques was developed. This system will show the information obtained by different CI techniques in order to help operators to take decision in real time and guide them in the fault diagnosis before the normal alarm limits are reached. (author)

  5. Data warehouse based decision support system in nuclear power plants

    International Nuclear Information System (INIS)

    Nadinic, B.

    2004-01-01

    Safety is an important element in business decision making processes in nuclear power plants. Information about component reliability, structures and systems, data recorded during the nuclear power plant's operation and outage periods, as well as experiences from other power plants are located in different database systems throughout the power plant. It would be possible to create a decision support system which would collect data, transform it into a standardized form and store it in a single location in a format more suitable for analyses and knowledge discovery. This single location where the data would be stored would be a data warehouse. Such data warehouse based decision support system could help make decision making processes more efficient by providing more information about business processes and predicting possible consequences of different decisions. Two main functionalities in this decision support system would be an OLAP (On Line Analytical Processing) and a data mining system. An OLAP system would enable the users to perform fast, simple and efficient multidimensional analysis of existing data and identify trends. Data mining techniques and algorithms would help discover new, previously unknown information from the data as well as hidden dependencies between various parameters. Data mining would also enable analysts to create relevant prediction models that could predict behaviour of different systems during operation and inspection results during outages. The basic characteristics and theoretical foundations of such decision support system are described and the reasons for choosing a data warehouse as the underlying structure are explained. The article analyzes obvious business benefits of such system as well as potential uses of OLAP and data mining technologies. Possible implementation methodologies and problems that may arise, especially in the field of data integration, are discussed and analyzed.(author)

  6. A requirements specification for a software design support system

    Science.gov (United States)

    Noonan, Robert E.

    1988-01-01

    Most existing software design systems (SDSS) support the use of only a single design methodology. A good SDSS should support a wide variety of design methods and languages including structured design, object-oriented design, and finite state machines. It might seem that a multiparadigm SDSS would be expensive in both time and money to construct. However, it is proposed that instead an extensible SDSS that directly implements only minimal database and graphical facilities be constructed. In particular, it should not directly implement tools to faciliate language definition and analysis. It is believed that such a system could be rapidly developed and put into limited production use, with the experience gained used to refine and evolve the systems over time.

  7. Computational intelligence for decision support in cyber-physical systems

    CERN Document Server

    Ali, A; Riaz, Zahid

    2014-01-01

    This book is dedicated to applied computational intelligence and soft computing techniques with special reference to decision support in Cyber Physical Systems (CPS), where the physical as well as the communication segment of the networked entities interact with each other. The joint dynamics of such systems result in a complex combination of computers, software, networks and physical processes all combined to establish a process flow at system level. This volume provides the audience with an in-depth vision about how to ensure dependability, safety, security and efficiency in real time by making use of computational intelligence in various CPS applications ranging from the nano-world to large scale wide area systems of systems. Key application areas include healthcare, transportation, energy, process control and robotics where intelligent decision support has key significance in establishing dynamic, ever-changing and high confidence future technologies. A recommended text for graduate students and researche...

  8. Real time data acquisition and processing system software supported by RDOS

    International Nuclear Information System (INIS)

    Yang Huimin; Chou Gongchun; Hao Shuxiang

    1982-01-01

    The paper describes a system software supported by RDOS operating system for management and supervision a multiuser nuclear spectrum data acquisition and processing system to be made of NOVA/840 computer. The system has manifold functions including four direct address data acquisition channels. One multi-dimension nuclear data acquisition channel, four scalers and four automatic control entrances. Every channel is used competitively by each user. The system's management and all processing functions are performed by system software. The architecture of the system can renew according to users' requirement with support of the system software.This article explains the logical structure of the system software and discusses some technical keys

  9. Decommissioning support system, using RFID and USN

    Energy Technology Data Exchange (ETDEWEB)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  10. Performance support system in higher engineering education - introduction and empirical validation

    NARCIS (Netherlands)

    Stoyanov, S.; Stoyanov, Slavi; Kommers, Petrus A.M.; Bastiaens, T.J.; Martinez Mediano, Catalina

    2008-01-01

    The paper defines and empirically validates the concept of performance support system in higher engineering education. The validation of the concept is based upon two studies: a pilot and an experiment, on the effect of performance support system on achievements and attitudes of students. The

  11. Development of an integrated decision support system to aid cognitive activities of operators

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Seong, Poong Hyun

    2007-01-01

    As digital and computer technologies have grown, Human-Machine Interfaces (HMIs) have evolved. In safety-critical systems, especially in Nuclear Power Plants (NPPs), HMIs are important for reducing operational costs, the number of necessary operators, and the probability of accident occurrence. Efforts have been made to improve Main Control Room (MCR) interface design and to develop automated or decision support systems to ensure convenient operation and maintenance. In this paper, an integrated decision support system to aid operator cognitive processes is proposed for advanced MCRs of future NPPs. This work suggests the design concept of a decision support system which accounts for an operator's cognitive processes. The proposed system supports not only a particular task, but also the entire operation process based on a human cognitive process model. In this paper, the operator's operation processes are analyzed according to a human cognitive process model and appropriate support systems that support each cognitive process activity are suggested

  12. Learner-oriented distance education supporting service system model and applied research

    Directory of Open Access Journals (Sweden)

    Chen Liyong

    2016-01-01

    Full Text Available Distance education is a product of social progress and an emerging way of life-long learning as well. This paper describes the construction of the distance education supporting service system and establishes the distance education supporting service system from the perspective of distance education learners. Under the premise of considering to provide six influencing factors--learning facilities, learning coaching and counseling, learning resources, education and teaching information, assessment of student learning situation and organization of practical teaching activities, this paper assesses the distance education supporting service system of Beijing, Shanghai and Shenzhen by using AHP.

  13. Design of an integrated operator support system for advanced NPP MCRs. Issues and perspectives

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Seong Poong-Hyun

    2010-01-01

    Recently, human error has been highlighted as one of the main causes of accidents in nuclear power plants (NPPs). In order to prevent human errors during the main control room (MCR) operations, which are highly complex and mentally taxing activities, improved interfaces and operator support systems have been developed for advanced MCRs. Although operator support systems have the capability to improve the safety and reliability of an NPP, inappropriate designs can have adverse effects on the system safety. Designs based on systematic development frames and validation/verification of the systems are pivotal strategies to circumvent the negative effects of operator support systems. In this paper, an integrated operator support system designed to aid the cognitive activities of operators as well as theoretical and experimental evaluation methods of operator support systems are reviewed. From this review, it was concluded that not only issues about systems (e.g., the accuracy of the system outputs), but also issues about human operators who use the systems (for instance, information quality, the operator's trust and dependency on support systems) should be considered in the design of efficient operator support systems. (author)

  14. Development of decision support system for employee selection using Adaptive Neuro Fuzzy Inference System

    Directory of Open Access Journals (Sweden)

    ‘Azzam Abdullah

    2018-01-01

    Full Text Available The number of children day care is increasing from year to year. Children day care is categorized as service industry that help parents in caring and educate children. This type of service industry plays a substitute for the family at certain hours, usually during work hours. The common problems in this industry is related to the employee performance. Most of employees have a less understanding about the whole job. Some employees only perform a routine task, i.e. feeding, cleaning and putting the child to sleep. The role in educating children is not performed as well as possible. Therefore, the employee selection is an important process to solve a children day care problem. An effective decision support system is required to optimize the employee selection process. Adaptive neuro fuzzy inference system (ANFIS is used to develop the decision support system for employee selection process. The data used to build the system is the historical data of employee selection process in children day care. The data shows the characteristic of job applicant that qualified and not qualified. From that data, the system can perform a learning process and give the right decision. The system is able to provide the right decision with an error of 0,00016249. It means that the decision support system that developed using ANFIS can give the right recommendation for employee selection process.

  15. Decision support systems for transportation system management and operations (TSM&O).

    Science.gov (United States)

    2015-12-01

    There is a need for the development of tools and methods to support off-line and real-time : planning and operation decisions associated with the Transportation System Management and : Operations (TSM&O) program. The goal of this proposed project is ...

  16. The EVS: a computerized decision support system for GPs in the Netherlands.

    NARCIS (Netherlands)

    Wolters, I.; Hoogen, H. van den; Bakker, D. de

    2003-01-01

    Background: In 1998 a project was started to introduce nationally a decision support system in general practice in the Netherlands, called EVS (electronic prescription support system). The system contains national guidelines developed by the Dutch Council of GPs (NHG) for approximately 80 diagnoses.

  17. Rules for selection of computer system to support customer relationships management

    Directory of Open Access Journals (Sweden)

    Dorota Buchnowska

    2012-12-01

    Full Text Available The number of support systems for business management on the Polish market is increasing. Because of that, enterprises are facing a more and more difficult dilemma: which solution to choose? This paper will present stages of the selection process of applications for customer relationships management support, discuss selection criteria and present a decision making tool for the selection of management support system, allowing for multi-faceted and impartial comparison of business applications.

  18. Optimization-based decision support systems for planning problems in processing industries

    OpenAIRE

    Claassen, G.D.H.

    2014-01-01

    Summary Optimization-based decision support systems for planning problems in processing industries Nowadays, efficient planning of material flows within and between supply chains is of vital importance and has become one of the most challenging problems for decision support in practice. The tremendous progress in hard- and software of the past decades was an important gateway for developing computerized systems that are able to support decision making on different levels within enterprises. T...

  19. Development of diagnosis and maintenance support system for nuclear power plants with flexible inference function and knowledge base edition support function

    International Nuclear Information System (INIS)

    Fujii, Makoto; Seki, Eiji; Tai, Ichiro; Morioka, Toshihiko

    1988-01-01

    For the reliable and efficient diagnosis and inspection work of the nuclear power plant equipments, 'Diagnosis and Maintenance Support System' has been developed. This system has functions to assist operators or engineers to observe and evaluate equipment conditions based on the experts' knowledge. These functions are carried out through dialogue between the system and users. This system has two subsystems: diagnosis subsystem and knowledge base edition support subsystem. To achieve the functions of diagnosis subsystem, a new method of knowledge processing for equipment diagnosis is adopted. This method is based on the concept of 'Cause Generation and Checking'. Knowledge for diagnosis is represented with modularized production rules. And each rule module consists of four different type rules with hierarchical structure. With this approach, the system is equipped with sufficient performance not only in diagnosis function but also in flexible man-machine interface. Knowledge base edition support subsystem (Graphical Rule Editor) is provided for this system. This editor has functions to display and edit the contents of knowledge base with tree structures through the graphic display. With these functions, the efficiency of constructing expert system is highly improved. By applying this system to the maintenance support of neutron monitoring system, it is proved that this system has satisfactory performance as a diagnosis and maintenance support system. (author)

  20. Structural assessments of plate type support system for APR1400 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Anh Tung; Namgung, Ihn, E-mail: inamgung@kings.ac.kr

    2017-04-01

    Highlights: • This paper investigates plate-type support structure for the reactor vessel of the APR 1400. • The tall column supports of APR1400 reactor challenges in seismic and severe accident events. • A plate-type support of reactor vessel was proposed and evaluated based on ASME code. • The plate-type support was assessed to show its higher rigidity than column-type. - Abstract: This paper investigates an alternative form of support structure for the reactor vessel of the APR 1400. The current reactor vessel adopts a four-column support arrangement locating on the cold legs of the vessel. Although having been successfully designed, the tall column structure challenges in seismic events. In addition, for the mitigation of severe accident consequences, the columns inhibit ex-vessel coolant flow, hence the elimination of the support columns proposes extra safety advantages. A plate-type support was proposed and evaluated for the adequacy of meeting the structural stiffness by Finite Element Analysis (FEA) approach. ASME Boiler and Pressure Vessel Code was used to verify the design. The results, which cover thermal and static structural analysis, show stresses are within allowable limits in accordance with the design code. Even the heat conduction area is increased for the plate-type of support system, the results showed that the thermal stresses are within allowable limits. A comparison of natural frequencies and mode shapes for column support and plate-type support were presented as well which showed higher fundamental frequencies for the plate-type support system resulting in greater rigidity of the support system. From the outcome of this research, the plate-type support is proven to be an alternative to current APR column type support design.

  1. (abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

    Science.gov (United States)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

  2. User's manual of a support system for human reliability analysis

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Tamura, Kazuo.

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user's guide of the system. (author)

  3. Development of an ecological decision support system

    NARCIS (Netherlands)

    van Beusekom, Frits; Brazier, Frances; Schipper, Piet; Treur, Jan; del Pobil, A.P.

    1998-01-01

    In this paper a knowledge-based decision support system is described that determines the abiotic (chemical and physical) characteristics of a site on the basis of in-homogeneous samples of plant species. Techniques from the area of non-monotonic reasoning are applied to model multi-interpretable

  4. Concept of operator support system based on cognitive simulation

    International Nuclear Information System (INIS)

    Sasou, Kunihide; Takano, Kenichi

    1999-01-01

    Hazardous technologies such chemical plants, nuclear power plants, etc. have introduced multi-layered defenses to prevent accidents. One of those defenses is experienced operators in control rooms. Once an abnormal condition occurs, they are the front line people to cope with it. Therefore, operators' quick recognition of the plant conditions and fast decision making on responses are quite important for trouble shooting. In order to help operators to deal with abnormalities in process plants, lots of efforts had been done to develop operator support systems since early 1980s (IAEA, 1993). However, the boom in developing operator support systems has slumped due to the limitations of knowledge engineering, artificial knowledge, etc (Yamamoto, 1998). The limitations had also biased the focus of the system development to abnormality detection, root cause diagnosis, etc (Hajek, Hashemi, Sharma and Chandrasekaran, 1986). Information or guidance about future plant behavior and strategies/tactics to deal with abnormal events are important and helpful for operators but researches and development of those systems made a belated start. Before developing these kinds of system, it is essential to understand how operators deal with abnormalities. CRIEPI has been conducting a project to develop a computer system that simulates behavior of operators dealing with abnormal operating conditions in a nuclear power plant. This project had two stages. In the first stage, the authors developed a prototype system that simulates behavior of a team facing abnormal events in a very simplified power plant (Sasou, Takano and Yoshimura, 1995). In the second stage, the authors applied the simulation technique developed in the first stage to construct a system to simulate a team's behavior in a nuclear power plant. This paper briefly summarizes the simulation system developed in the second stage, main mechanism for the simulation and the concept of an operator support system based on this

  5. [Knowledge management system for laboratory work and clinical decision support].

    Science.gov (United States)

    Inada, Masanori; Sato, Mayumi; Yoneyama, Akiko

    2011-05-01

    This paper discusses a knowledge management system for clinical laboratories. In the clinical laboratory of Toranomon Hospital, we receive about 20 questions relevant to laboratory tests per day from medical doctors or co-medical staff. These questions mostly involve the essence to appropriately accomplish laboratory tests. We have to answer them carefully and suitably because an incorrect answer may cause a medical accident. Up to now, no method has been in place to achieve a rapid response and standardized answers. For this reason, the laboratory staff have responded to various questions based on their individual knowledge. We began to develop a knowledge management system to promote the knowledge of staff working for the laboratory. This system is a type of knowledge base for assisting the work, such as inquiry management, laboratory consultation, process management, and clinical support. It consists of several functions: guiding laboratory test information, managing inquiries from medical staff, reporting results of patient consultation, distributing laboratory staffs notes, and recording guidelines for laboratory medicine. The laboratory test information guide has 2,000 records of medical test information registered in the database with flexible retrieval. The inquiry management tool provides a methos to record all questions, answer easily, and retrieve cases. It helps staff to respond appropriately in a short period of time. The consulting report system treats patients' claims regarding medical tests. The laboratory staffs notes enter a file management system so they can be accessed to aid in clinical support. Knowledge sharing using this function can achieve the transition from individual to organizational learning. Storing guidelines for laboratory medicine will support EBM. Finally, it is expected that this system will support intellectual activity concerning laboratory work and contribute to the practice of knowledge management for clinical work support.

  6. Behavior-aware decision support systems : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Gary B.; Homer, Jack (Homer Consulting); Chenoweth, Brooke N.; Backus, George A.; Strip, David R.

    2007-11-01

    As Sandia National Laboratories serves its mission to provide support for the security-related interests of the United States, it is faced with considering the behavioral responses that drive problems, mitigate interventions, or lead to unintended consequences. The effort described here expands earlier works in using healthcare simulation to develop behavior-aware decision support systems. This report focuses on using qualitative choice techniques and enhancing two analysis models developed in a sister project.

  7. COMOPTEVFOR Acronym and Abbreviation List (CAAL).

    Science.gov (United States)

    1981-10-01

    Control AFCS Automatic Flight Control System AD Acoustic Firing Device AFEWC Air Force Electronic Warfare Center * AFETR Air Force Eastern Test Range...Dressing Station * BE Bearing Error BER Bit Effectiveness Report Bit Error Rate BETA Battlefield Exploitation and Target Acquisition BFDL Blue Force...System Command Destruct System CDSS Command Decision Subsystem CE Cost Effectiveness Critical Examination CEB CNO Executive Board CEI Communications

  8. Challenges while Updating Planning Parameters of an ERP System and How a Simulation-Based Support System Can Support Material Planners

    Directory of Open Access Journals (Sweden)

    Ulrike Stumvoll

    2016-01-01

    Full Text Available In an Enterprise Resource Planning (ERP system, production planning is influenced by a variety of parameters. Previous investigations show that setting parameter values is highly relevant to a company’s target system. Parameter settings should be checked and adjusted, e.g., after a change in environmental factors, by material planners. In practice, updating the parameters is difficult due to several reasons. This paper presents a simulation-based decision support system, which helps material planners in all stages of decision-making processes. It will present the system prototype’s user interface and the results of applying the system to a case study.

  9. The 12-foot pressure wind tunnel restoration project model support systems

    Science.gov (United States)

    Sasaki, Glen E.

    1992-01-01

    The 12 Foot Pressure Wind Tunnel is a variable density, low turbulence wind tunnel that operates at subsonic speeds, and up to six atmospheres total pressure. The restoration of this facility is of critical importance to the future of the U.S. aerospace industry. As part of this project, several state of the art model support systems are furnished to provide an optimal balance between aerodynamic and operational efficiency parameters. Two model support systems, the Rear Strut Model Support, and the High Angle of Attack Model Support are discussed. This paper covers design parameters, constraints, development, description, and component selection.

  10. Group decision support system for customer-driven product design

    Science.gov (United States)

    Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

    2000-10-01

    This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

  11. FRAMEWORK OF TAILORMADE DRIVING SUPPORT SYSTEMS AND NEURAL NETWORK DRIVER MODEL

    Directory of Open Access Journals (Sweden)

    Toshiya HIROSE, M.S.

    2004-01-01

    Nowadays, tailormade medical treatment is receiving much attention in the field of medical care. It is also desirable for driving support systems to reflect the driving characteristics of individuals as much as possible, begin monitoring the driver when a driver starts driving and calculates the driver model, and supports them with a model that makes the driver feel quite normal. That is the construction of Tailormade Driving Support Systems (TDSS. This research proposes a concept and a framework of TDSS, and presents a driver model that uses a neural network to build the system. As for the feasibility of this system, the research selects braking as a typical constituent element, and illustrates and reviews the results of experiments and simulations.

  12. Hail Disrometer Array for Launch Systems Support

    Science.gov (United States)

    Lane, John E.; Sharp, David W.; Kasparis, Takis C.; Doesken, Nolan J.

    2008-01-01

    Prior to launch, the space shuttle might be described as a very large thermos bottle containing substantial quantities of cryogenic fuels. Because thermal insulation is a critical design requirement, the external wall of the launch vehicle fuel tank is covered with an insulating foam layer. This foam is fragile and can be damaged by very minor impacts, such as that from small- to medium-size hail, which may go unnoticed. In May 1999, hail damage to the top of the External Tank (ET) of STS-96 required a rollback from the launch pad to the Vehicle Assembly Building (VAB) for repair of the insulating foam. Because of the potential for hail damage to the ET while exposed to the weather, a vigilant hail sentry system using impact transducers was developed as a hail damage warning system and to record and quantify hail events. The Kennedy Space Center (KSC) Hail Monitor System, a joint effort of the NASA and University Affiliated Spaceport Technology Development Contract (USTDC) Physics Labs, was first deployed for operational testing in the fall of 2006. Volunteers from the Community Collaborative Rain. Hail, and Snow Network (CoCoRaHS) in conjunction with Colorado State University were and continue to be active in testing duplicate hail monitor systems at sites in the hail prone high plains of Colorado. The KSC Hail Monitor System (HMS), consisting of three stations positioned approximately 500 ft from the launch pad and forming an approximate equilateral triangle (see Figure 1), was deployed to Pad 39B for support of STS-115. Two months later, the HMS was deployed to Pad 39A for support of STS-116. During support of STS-117 in late February 2007, an unusual hail event occurred in the immediate vicinity of the exposed space shuttle and launch pad. Hail data of this event was collected by the HMS and analyzed. Support of STS-118 revealed another important application of the hail monitor system. Ground Instrumentation personnel check the hail monitors daily when a

  13. Adaptive Attention Allocation Support: Effects of System Conservativeness and Human Competence

    NARCIS (Netherlands)

    van Maanen, Peter-Paul; Lucassen, Teun; van Dongen, Kees; Schmorrow, Dylan D.; Fidopiastis, Cali M.

    2011-01-01

    Naval tactical picture compilation is a task for which allocation of attention to the right information at the right time is crucial. Performance on this task can be improved if a support system assists the human operator. However, there is evidence that benefits of support systems are highly

  14. The systems psychodynamic experiences of organisational transformation amongst support staff

    Directory of Open Access Journals (Sweden)

    Martin Steyn

    2016-10-01

    Full Text Available Orientation: The unconscious impact of organisational transformation is often neglected and even denied. This research revealed the manifestation and impact of high levels and different forms of anxiety experienced by employees during transformation. Research objective: The objective was to study and describe the manifesting systems psychodynamic behaviour amongst support staff during organisational transformation. Motivation for the study: Organisational transformation is mostly researched from a leadership viewpoint. Little research data are available on the experiences of support staff on the receiving end of decisions about and implementation of transformation. Research design, approach and method: A qualitative approach within the phenomenological hermeneutic interpretive stance was used. The research was set in a government organisation. A semi-structured interview with four conveniently and purposefully chosen support staff members was thematically analysed using systems psychodynamics as theoretical paradigm. Main findings: Four themes manifested, namely de-authorisation and detachment, being bullied and seduced by leadership, the organisation in the mind as incompetent, and a dangerous and persecutory system. In the discussion, the basic assumptions and relevant constructs are interpreted. Practical implications: Understanding the transformation experiences of support staff could assist the industrial psychologist to facilitate appropriate support in coaching more junior staff towards increasing wellness and work performance. Contribution: Organisational transformation is highlighted as an anxiety provoking experience especially on the lower levels of the organisation. Its potentially deep and complex psychological impact could possibly derail parts of the system if not managed in a psychologically contained manner.

  15. How do top managers support strategic information system projects and why do they sometimes withhold this support?

    NARCIS (Netherlands)

    Boonstra, A.

    Top management support is an important determinant of information system project success. This is especially the case in complex and large-scale IS projects. Surprisingly, however, there is only limited reliable knowledge about the types of behavior that underlie top management support. Further,

  16. Space Station Environmental Control/Life Support System engineering

    Science.gov (United States)

    Miller, C. W.; Heppner, D. B.

    1985-01-01

    The present paper is concerned with a systems engineering study which has provided an understanding of the overall Space Station ECLSS (Environmental Control and Life Support System). ECLSS/functional partitioning is considered along with function criticality, technology alternatives, a technology description, single thread systems, Space Station architectures, ECLSS distribution, mechanical schematics per space station, and Space Station ECLSS characteristics. Attention is given to trade studies and system synergism. The Space Station functional description had been defined by NASA. The ECLSS will utilize technologies which embody regenerative concepts to minimize the use of expendables.

  17. IdentiCS – Identification of coding sequence and in silico reconstruction of the metabolic network directly from unannotated low-coverage bacterial genome sequence

    Directory of Open Access Journals (Sweden)

    Zeng An-Ping

    2004-08-01

    Full Text Available Abstract Background A necessary step for a genome level analysis of the cellular metabolism is the in silico reconstruction of the metabolic network from genome sequences. The available methods are mainly based on the annotation of genome sequences including two successive steps, the prediction of coding sequences (CDS and their function assignment. The annotation process takes time. The available methods often encounter difficulties when dealing with unfinished error-containing genomic sequence. Results In this work a fast method is proposed to use unannotated genome sequence for predicting CDSs and for an in silico reconstruction of metabolic networks. Instead of using predicted genes or CDSs to query public databases, entries from public DNA or protein databases are used as queries to search a local database of the unannotated genome sequence to predict CDSs. Functions are assigned to the predicted CDSs simultaneously. The well-annotated genome of Salmonella typhimurium LT2 is used as an example to demonstrate the applicability of the method. 97.7% of the CDSs in the original annotation are correctly identified. The use of SWISS-PROT-TrEMBL databases resulted in an identification of 98.9% of CDSs that have EC-numbers in the published annotation. Furthermore, two versions of sequences of the bacterium Klebsiella pneumoniae with different genome coverage (3.9 and 7.9 fold, respectively are examined. The results suggest that a 3.9-fold coverage of the bacterial genome could be sufficiently used for the in silico reconstruction of the metabolic network. Compared to other gene finding methods such as CRITICA our method is more suitable for exploiting sequences of low genome coverage. Based on the new method, a program called IdentiCS (Identification of Coding Sequences from Unfinished Genome Sequences is delivered that combines the identification of CDSs with the reconstruction, comparison and visualization of metabolic networks (free to download

  18. Operator support systems in nuclear power plants national report from Romania

    International Nuclear Information System (INIS)

    Bengulescu, D.; Jianu, A.

    1996-01-01

    The report gives a short overview of the status of the activities in Romania relevant for the present Co-ordination Research Programme: the development of small size simulators and computerised support systems for the CANDU systems; the development of an expert system for risk monitoring, as a component of the Cernavoda PSA activities for PSA team training and design changes evaluation; the implementation in Romania of a segment of an integrated and comprehensive real-time on-line decision support system for nuclear emergency in Europe. 11 refs

  19. Support systems for faces and workings (Le soutenement des tailles ou chantiers d'exploitation)

    Energy Technology Data Exchange (ETDEWEB)

    Stassen, P

    1978-01-01

    Various support systems for use in underground mining are discussed, these include: A. Props: wooden props, steel props and yielding props. B. Roofbars: wooden bars, solid steel bars, steel link bars, steel flange bars, cruciform steel bars. C. Chocks: working conditions, timber release chocks, steel-girder chocks, mechanical chocks and chock-type supports. D. Powered supports: classification of powered support systems, the parameters which have to be considered when selecting the right type of powered support, minimal load- bearing requirement for powered supports, characteristic features of some powered-support system. (10 refs.) (In French)

  20. Collaboration support system for "Phobos-Soil" space mission.

    Science.gov (United States)

    Nazarov, V.; Nazirov, R.; Zakharov, A.

    2009-04-01

    Rapid development of communication facilities leads growth of interactions done via electronic means. However we can see some paradox in this segment in last times: Extending of communication facilities increases collaboration chaos. And it is very sensitive for space missions in general and scientific space mission particularly because effective decision of this task provides successful realization of the missions and promises increasing the ratio of functional characteristic and cost of mission at all. Resolving of this problem may be found by using respective modern technologies and methods which widely used in different branches and not in the space researches only. Such approaches as Social Networking, Web 2.0 and Enterprise 2.0 look most prospective in this context. The primary goal of the "Phobos-Soil" mission is an investigation of the Phobos which is the Martian moon and particularly its regolith, internal structure, peculiarities of the orbital and proper motion, as well as a number of different scientific measurements and experiments for investigation of the Martian environment. A lot of investigators involved in the mission. Effective collaboration system is key facility for information support of the mission therefore. Further to main goal: communication between users of the system, modern approaches allows using such capabilities as self-organizing community, user generated content, centralized and federative control of the system. Also it may have one unique possibility - knowledge management which is very important for space mission realization. Therefore collaboration support system for "Phobos-Soil" mission designed on the base of multilayer model which includes such levels as Communications, Announcement and Information, Data sharing and Knowledge management. The collaboration support system for "Phobos-Soil" mission will be used as prototype for prospective Russian scientific space missions and the presentation describes its architecture

  1. Intelligent car guidance system (parking support system); Chiteki sharyo yudo system (chusha shien system)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This system enables a driver to park the car at a predetermined spot without the driver seeing the outside scene. The system shows on a driver seat display the steps that the driver is to follow and thereby supports the driver when visibility is poor, when the parking space is difficult to approach, when the driver is a novice, or when the driver is aged. The system ensures accurate positioning of the car by showing the steering direction and angle, the car speed, and the force of braking to the driver. For this purpose, the system knows the absolute car position by the use of an RFID (Radio Frequency Identification) tag which is a kind of IC (Integrated Circuit) card and D-GPS (Differential-Global Positioning System), grasps the relative car position by the use of a gyroscope, and collects data from plural sensors, which are complementary to each other, such as a car-speed sensor and a steering sensor. (translated by NEDO)

  2. Support mechanisms and risk: Implications on the Nordic electricity system

    DEFF Research Database (Denmark)

    Kitzing, Lena; Ravn, Hans

    2013-01-01

    a stochastic analysis for the Nordic electricity system by conducting simulations with the energy system model Balmorel and by applying the mean-standard deviation approach of modern portfolio theory to quantify risk implications of policy instruments for an exemplary offshore wind park. The analysis reveals......Investments in renewable energy projects, such as offshore wind parks, are very much dependent on financial support. The type of policy instrument chosen for such support determines investors' exposure to market risk, and thus influences which rate of return they expect to achieve. We make...... that the two support policy schemes Feed-in Tariffs and Feed-in Premiums provide different risk-return relationships. In the investigated case, a Feed-in Premium scheme would require a 13% higher support level, because of a 6% higher exposure of investors to market risk. Our findings can help when designing...

  3. Educational tool for modeling and simulation of a closed regenerative life support system

    Science.gov (United States)

    Arai, Tatsuya; Fanchiang, Christine; Aoki, Hirofumi; Newman, Dava J.

    For long term missions on the moon and Mars, regenerative life support systems emerge as a promising key technology for sustaining successful explorations with reduced re-supply logistics and cost. The purpose of this study was to create a simple model of a regenerative life support system which allows preliminary investigation of system responses. A simplified regenerative life support system was made with MATLAB Simulink ™. Mass flows in the system were simplified to carbon, water, oxygen and carbon dioxide. The subsystems included crew members, animals, a plant module, and a waste processor, which exchanged mass into and out of mass reservoirs. Preliminary numerical simulations were carried out to observe system responses. The simplified life support system model allowed preliminary investigation of the system response to perturbations such as increased or decreased number of crew members. The model is simple and flexible enough to add new components, and also possible to numerically predict non-linear subsystem functions and responses. Future work includes practical issues such as energy efficiency, air leakage, nutrition, and plant growth modeling. The model functions as an effective teaching tool about how a regenerative advanced life support system works.

  4. The development of the design method of nuclear piping system supported by elasto-plastic support structures (Part 1)

    International Nuclear Information System (INIS)

    Endo, R.; Murota, M.; Kawahata, J.-I.; Sato, T.; Mekomoto, Y.; Takayama, Y.; Kobayashi, H.; Hirose, J.

    1993-01-01

    The conventional aseismic design method of nuclear piping system is very conservative because of the accumulation of various safety factors in the design process, and nuclear piping systems are thought to have a large safety margin. Considering this situation, we promoted research to further rationalize nuclear power plants by reducing the amount of support structures and reducing the piping seismic response through vibration energy absorption resulting from the elasto-plastic behavior of piping support structures. The research has the following three stages. In the first stage, we select conventional piping support structures in Japanese light-water reactors that exhibit elasto-plastic behavior, and study the displacement dependency and the vibration frequency dependency on the stiffness and the energy absorption by testing their model. In the second stage, we make a piping test model with support structures whose characteristics have already been obtained, and perform vibration tests on a shaking table. In this way, we analyze the piping vibration characteristics by sinusoidal wave sweep tests and the piping response characteristics by seismic wave vibration tests, when the support structures are in an elasto-plastic condition. In the third stage, a general method is developed to evaluate the characteristics of the support structures obtained in the tests and it is applied to the evaluation of the characteristics of general support structures. A simplified analysis method is developed to evaluate the piping seismic response using the piping model test result. To expand the results mentioned above, we are developing a seismic design method of piping systems that allows support structures to have elasto-plastic behaviour. This paper reports the results of experiments conducted under the joint research program of Japanese electric power companies with support elements in the first stage and those with piping models in the second stage

  5. A support system for assessing local vulnerability to weather and climate

    Science.gov (United States)

    Coletti, Alex; Howe, Peter D.; Yarnal, Brent; Wood, Nathan J.

    2013-01-01

    The changing number and nature of weather- and climate-related natural hazards is causing more communities to need to assess their vulnerabilities. Vulnerability assessments, however, often require considerable expertise and resources that are not available or too expensive for many communities. To meet the need for an easy-to-use, cost-effective vulnerability assessment tool for communities, a prototype online vulnerability assessment support system was built and tested. This prototype tool guides users through a stakeholder-based vulnerability assessment that breaks the process into four easy-to-implement steps. Data sources are integrated in the online environment so that perceived risks—defined and prioritized qualitatively by users—can be compared and discussed against the impacts that past events have had on the community. The support system is limited in scope, and the locations of the case studies do not provide a sufficiently broad range of sample cases. The addition of more publically available hazard databases combined with future improvements in the support system architecture and software will expand opportunities for testing and fully implementing the support system.

  6. The design and evaluation of an antimicrobial resistance surveillance system for neonatal intensive care units in Iran.

    Science.gov (United States)

    Rezaei-Hachesu, Peyman; Samad-Soltani, Taha; Yaghoubi, Sajad; GhaziSaeedi, Marjan; Mirnia, Kayvan; Masoumi-Asl, Hossein; Safdari, Reza

    2018-07-01

    Neonatal intensive care units (NICUs) have complex patients in terms of their diagnoses and required treatments. Antimicrobial treatment is a common therapy for patients in NICUs. To solve problems pertaining to empirical therapy, antimicrobial stewardship programs have recently been introduced. Despite the success of these programs in terms of data collection, there is still inefficiency in terms of analyzing and reporting the data. Thus, to successfully implement these stewardship programs, the design of antimicrobial resistance (AMR) surveillance systems is recommended as a first step. As a result, this study aimed to design an AMR surveillance system for use in the NICUs in northwestern Iranian hospitals to cover these information gaps. The recommended system is compatible with the World Health Organization (WHO) guidelines. The business intelligence (BI) requirements were extracted in an interview with a product owner (PO) using a valid and reliable checklist. Following this, an AMR surveillance system was designed and evaluated in relation to user experiences via a user experience questionnaire (UEQ). Finally, an association analysis was performed on the database, and the results were reported by identifying the important multidrug resistances in the database. A customized software development methodology was proposed. The three major modules of the AMR surveillance are the data registry, dashboard, and decision support modules. The data registry module was implemented based on a three-tier architecture, and the Clinical Decision Support System (CDSS) and dashboard modules were designed based on the BI requirements of the Scrum product owner (PO). The mean values of UEQ measures were in a good range. This measures showed the suitable usability of the AMR surveillance system. Applying efficient software development methodologies allows for the systems' compatibility with users' opinions and requirements. In addition, the construction of interdisciplinary

  7. The development of design method of nuclear piping system supported by elasto-plastic support structures (part 2)

    International Nuclear Information System (INIS)

    Endo, R.; Murota, M.; Kawabata, J-I.; Hirose, J.; Nekomoto, Y.; Takayama, Y.; Kobayashi, H.

    1995-01-01

    The conventional seismic design method of nuclear piping system is very conservative because of the accumulation of various safety factors in the design process, and nuclear piping systems are thought to have a large safety margin. Considering this situations, research program was promoted to furthermore rationalize nuclear power plants by reducing the amount of support structures and reducing the piping's seismic response through vibration energy absorption resulting from the elasto-plastic behavior of piping support structures. The research had the following three stages. In the first stage, we selected conventional piping support structures in light-water reactors that exhibited elasto-plastic behavior, and studied the effect of displacement and the vibration frequency on the stiffness and on the energy absorption by testing these models. In the second stage, vibration tests were performed using piping models with support structures on shaking tables. The piping vibration characteristics were clarified by sinusoidal sweep tests and the piping response characteristics by seismic wave vibration tests when the support structures were in an elasto-plastic condition. In the third stage, a general method was developed to evaluate the characteristics of a variety of support structures in the tests. A simplified analysis method was also developed to evaluate the piping seismic response using the piping model test result. To expand the results mentioned above, we also established a new seismic design method of piping systems that allowed support structures to have elasto-plastic behavior. This paper reports the newly developed seismic design method based on the results of experiments conducted under the joint research program of Japanese electric power companies (The Japan Atomic Power Co., Hokkaido EPC, Tohoku EPC, Tokyo EPC, Chubu EPC, Hokuriku EPC, Kansai EPC, Chugoku EPC, Shikoku EPC, Kyushu EPC) and nuclear plant makers (Hitachi Ltd., Toshiba Co., MHI Ltd., HEC Ltd

  8. A Review of Decision Support Systems for Smart Homes in the Health Care System.

    Science.gov (United States)

    Baumgärtel, Diana; Mielke, Corinna; Haux, Reinhold

    2018-01-01

    The use of decision support systems for smart homes can provide attractive solutions for challenges that have arisen in the Health Care System due to ageing of society. In order to provide an overview of current research projects in this field, a systematic literature review was performed according to the PRISMA approach. The aims of this work are to provide an overview of current research projects and to update a similar study from 2012. The literature search engines IEEE Xplore and PubMed were used. 23 papers were included. Most of the systems presented are developed for monitoring the patient regardless of their illness. For decision support, mainly rule-based approaches are used.

  9. A field experiment of energy education using integrative learning support system

    International Nuclear Information System (INIS)

    Obayashi, Fumiaki; Yamamoto, Atsumu; Ito, Kyoko; Shimoda, Hiroshi; Yoshikawa, Hidekazu

    2002-01-01

    A new energy learning support system for higher education was the object of this experiment. The aim of this learning support system is to support students within an integrative study environment in which various personal skills and general knowledge on energy related issues are to be developed. The main goals of this learning tool for the students are to simulate their interest and creativity, to enhance awareness, to increase capability of researching on the subject and to improve problem-solving skills on energy related issues. The salient feature of this learning support system is that it is used for group learning by which each learner can develop the ability to reflect on the subject through mutual discussion. Moreover, in order to keep the attention of the students on the topic and provide them with a better assimilation of the curriculum, a personified agent is used as a cooperative associate who assists learners through natural communication, using voice conversation function in Japanese language. Then, the subject experiment has been conducted. Also, means of effective energy education are discussed in this research. As a conclusion, this learning support system is proven to be effective and the use of it for energy education is recommended. (author)

  10. Enhanced digital library system that supports sustainable knowledge

    African Journals Online (AJOL)

    Enhanced digital library system that supports sustainable knowledge: A focus ... This research work provides a Web-Based University library, ability to access the ... and generates pins to authorize bonafide students and staff of the University.

  11. Support for system connectivity –Learning from evaluating an evaluation

    DEFF Research Database (Denmark)

    Christensen, Jesper Lindgaard

    been sparse on investigat-ing effects of these as well as on the broader criteria to evaluate the innovation networks and functioning of the system. This paper discusses what are such criteria for evaluating innovation policies that rely on enhanc-ing system connectivity and repair system failures......Innovation is said to be dependent upon collaboration and networks. The innovation system thinking empha-sizes networks but also their supporting informal institutions, learning processes, and the relations between actors in the system. Despite the importance of networks, evaluation studies have......? By way of illustration, and as a mean to be specific on these criteria, the paper discusses the possible rationale for governments to support business angel networks (BAN) and what criteria to apply when evaluating such networks. It is found that applying traditional evaluation criteria for assessing...

  12. Web-based Traffic Noise Control Support System for Sustainable Transportation

    Science.gov (United States)

    Fan, Lisa; Dai, Liming; Li, Anson

    Traffic noise is considered as one of the major pollutions that will affect our communities in the future. This paper presents a framework of web-based traffic noise control support system (WTNCSS) for a sustainable transportation. WTNCSS is to provide the decision makers, engineers and publics a platform to efficiently access the information, and effectively making decisions related to traffic control. The system is based on a Service Oriented Architecture (SOA) which takes the advantages of the convenience of World Wide Web system with the data format of XML. The whole system is divided into different modules such as the prediction module, ontology-based expert module and dynamic online survey module. Each module of the system provides a distinct information service to the decision support center through the HTTP protocol.

  13. Creation of closed life support systems

    Science.gov (United States)

    Gitelson, I.

    The 40-year-long experience in devising ecological systems with a significantly closed material cycling (CES), which are intended for human life support outside the Earth's biosphere, allows us to state that this problem has been largely solved technically. To test the terrestrial prototypes of these systems: Bios in Krasnoyarsk, the Terrestrial Ecological System (TES) in Moscow, and Bioplex in Houston, crews of humans stayed inside them over long periods of time. In Bios-3 humans could be fully (100%) provided with regenerated air and water and with a vegetable part (80%) of their diet. One human requires 4.5 kW of light energy, which is equal to the light energy incident on an 8-m2 surface perpendicular to solar rays in the Earth's orbit. The regeneration of air and water can be alternatively performed by a 17-L2 microalgal cultivator with a light-receiving surface of 8 m at 2 kW of light energy or by a conveyer culture of agricultural plants. To regenerate the vegetable part of2 the diet to the full, the area must increase to 31.5 m per person. Similar values have been obtained in the TES and in Bioplex. It can be concluded that the system is ready to be implemented in the engineering-technical designs of specific versions: for orbital flights, for missions to Mars and other planets, and for stations on the Moon and Mars. To improve the CES further, a number of new key problems should be resolved. The first of them are: to robotize the technological processes and to establish an optimized system of the internal control of the CES by the crew working in it; to develop a hybrid physicochemical-biological technology for returning the dead-end products of biosynthesis into the system's cycling; to solve the fundamental problem of regenerating the human ration completely inside the CES by the autotrophic chemo - and photosynthesis. Once this problem is solved, the energy requirements for life support in space will be significantly reduced. This will also considerably

  14. The influence of system interactivity and technical support on learning management system utilization

    Directory of Open Access Journals (Sweden)

    Sousan Baleghi-Zadeh

    2017-03-01

    Full Text Available In recent years, there has been a growing increase in using Learning Management System (LMS by universities. However, its utilization by students is limited in Malaysia. The main purpose of the present study is to develop and test a model that predicts LMS utilization by Malaysian higher education students. Based on the Technology Acceptance Model, the study investigated the relationships among six constructs (system interactivity, technical support, perceived ease of use, perceived usefulness, behavioral intention to use and LMS use through structural equation modelling. The participants were 216 undergraduate students from a local university in Malaysia. The result of the study revealed that system interactivity had a significant effect on perceived usefulness, but not on perceived ease of use; technical support had a significant effect on perceived ease of use, but not on perceived usefulness.

  15. Controlled Ecological Life Support System Breadboard Project - 1988

    Science.gov (United States)

    Knott, W. M.

    1989-01-01

    The Controlled Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989-1993 are listed. The biomass production chamber to be used by the project is described.

  16. An experimental study of the response of the multiple support piping systems

    International Nuclear Information System (INIS)

    Chiba, T.; Koyanagi, R.

    1987-01-01

    From the test results, following remarks have been obtained. 1. Since the effect of internal pressure was not so small on the stress response, its effect should be considered in the design of piping systems. 2. The effect of the phase of excitations was fairly dominant to the response of piping systems. From this fact, the adopting of the support structures which have different dynamic characteristics may be one of the more realistic approaches to reduce the response of piping systems. 3. The acceleration responses near the support points are always underestimated because the natural modes of the analysis are zero at these support points. 4. If the pseudo-static response is dominant, the stress responses near the support points are always overestimated by the ABS method to support groups. In such case the SRSS method is recommended. 5. The 10% method to the closely spaced modes is conservative for the flexible piping. The closely spaced mode methods to these flexible piping systems should be used carefully. 6. The SRSS combination method is offered the reasonable results to the space, modes and support groups in the multiple response spectra method. (orig.)

  17. COMPUTER SUPPORT SYSTEMS FOR ESTIMATING CHEMICAL TOXICITY: PRESENT CAPABILITIES AND FUTURE TRENDS

    Science.gov (United States)

    Computer Support Systems for Estimating Chemical Toxicity: Present Capabilities and Future Trends A wide variety of computer-based artificial intelligence (AI) and decision support systems exist currently to aid in the assessment of toxicity for environmental chemicals. T...

  18. A water management decision support system contributing to sustainability

    Science.gov (United States)

    Horváth, Klaudia; van Esch, Bart; Baayen, Jorn; Pothof, Ivo; Talsma, Jan; van Heeringen, Klaas-Jan

    2017-04-01

    Deltares and Eindhoven University of Technology are developing a new decision support system (DSS) for regional water authorities. In order to maintain water levels in the Dutch polder system, water should be drained and pumped out from the polders to the sea. The time and amount of pumping depends on the current sea level, the water level in the polder, the weather forecast and the electricity price forecast and possibly local renewable power production. This is a multivariable optimisation problem, where the goal is to keep the water level in the polder within certain bounds. By optimizing the operation of the pumps the energy usage and costs can be reduced, hence the operation of the regional water authorities can be more sustainable, while also anticipating on increasing share of renewables in the energy mix in a cost-effective way. The decision support system, based on Delft-FEWS as operational data-integration platform, is running an optimization model built in RTC-Tools 2, which is performing real-time optimization in order to calculate the pumping strategy. It is taking into account the present and future circumstances. As being the core of the real time decision support system, RTC-Tools 2 fulfils the key requirements to a DSS: it is fast, robust and always finds the optimal solution. These properties are associated with convex optimization. In such problems the global optimum can always be found. The challenge in the development is to maintain the convex formulation of all the non-linear components in the system, i.e. open channels, hydraulic structures, and pumps. The system is introduced through 4 pilot projects, one of which is a pilot of the Dutch Water Authority Rivierenland. This is a typical Dutch polder system: several polders are drained to the main water system, the Linge. The water from the Linge can be released to the main rivers that are subject to tidal fluctuations. In case of low tide, water can be released via the gates. In case of high

  19. Pose Planning for the Feed Support System of FAST

    Directory of Open Access Journals (Sweden)

    Rui Yao

    2014-01-01

    Full Text Available A six-cable driven parallel manipulator and an A-B rotator in the feed support system of the Five-hundred-meter Aperture Spherical radio Telescope (FAST are adopted for realizing the position and pose of nine feeds. The six-cable driven parallel manipulator is a flexible mechanism, which may not be stably controlled due to a small cable tension. The A-B rotator is a rigid mechanism, and its stability and accuracy can be improved by small pose angle. Based on the different characteristics, a pose planning function is presented. The optimization target of the pose planning function is to get the smallest pose angle of the A-B rotator, and the constraint condition can reflect the controllability of the six-cable driven parallel manipulator. Then, the pose planning realization process of the feed support system is proposed. Based on the pose planning method, optimized pose angles of the feed support system for the nine feeds are obtained, which suggests that the pose angle of the six-cable driven parallel manipulator changes from 0° to 14° and the pose angle of the A-B rotator changes from 0° to 26.4°.

  20. How Can a Global Social Support System Hope to Achieve Fairer Competiveness?

    Science.gov (United States)

    Goldblatt, Peter

    2016-01-01

    Ooms et al sets out some good general principles for a global social support system to improve fairer global competitiveness as a result of redistribution. This commentary sets out to summarize some of the conditions that would need to be satisfied for it to level up gradients in inequality through such a social support system, using the National Basketball Association (NBA) example as a point of reference. From this, the minimal conditions are described that would be required for the support system, proposed in the article by Ooms et al, to succeed. PMID:26927594

  1. Methodology and Supporting Toolset Advancing Embedded Systems Quality

    DEFF Research Database (Denmark)

    Berger, Michael Stübert; Soler, José; Brewka, Lukasz Jerzy

    2013-01-01

    Software quality is of primary importance in the development of embedded systems that are often used in safety-critical applications. Moreover, as the life cycle of embedded products becomes increasingly tighter, productivity and quality are simultaneously required and closely interrelated towards...... delivering competitive products. In this context, the MODUS (Methodology and supporting toolset advancing embedded systems quality) project aims to provide a pragmatic and viable solution that will allow SMEs to substantially improve their positioning in the embedded-systems development market. This paper...... will describe the MODUS project with focus on the technical methodologies that will be developed advancing embedded system quality....

  2. Approach to Health Supporting System Using Traditional Chinese Medicine

    Science.gov (United States)

    Watsuji, Tadashi; Shinohara, Shoji; Arita, Seizaburo

    The primary prevention of disease related to the lifestyle is an essential theme in medical research. Preventing before it arises is the important concept in traditional Chinese medicine (TCM). Since TCM, which emphasizes individual physical condition in medical treatment, has recently attracted considerable attention globally, objective diagnostic methods in TCM have been investigated in this work. Firstly, the fuzzy theory was applied to develop a tongue diagnosis supporting system based on the tongue diagnosis in TCM. Secondly, the usefulness of TCM health questionnaire was examined to identify individual physical condition. Our results suggest that the TCM health questionnaire is useful in the construction of a health supporting system based on TCM.

  3. Marketing Decision Support Systems: Adoption, Use and Satisfaction

    NARCIS (Netherlands)

    B. Wierenga (Berend); P.A.M. Oude Ophuis (Peter)

    1997-01-01

    textabstractThis paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors,

  4. [Information system for supporting the Nursing Care Systematization].

    Science.gov (United States)

    Malucelli, Andreia; Otemaier, Kelly Rafaela; Bonnet, Marcel; Cubas, Marcia Regina; Garcia, Telma Ribeiro

    2010-01-01

    It is an unquestionable fact, the importance, relevance and necessity of implementing the Nursing Care Systematization in the different environments of professional practice. Considering it as a principle, emerged the motivation for the development of an information system to support the Nursing Care Systematization, based on Nursing Process steps and Human Needs, using the diagnoses language, nursing interventions and outcomes for professional practice documentation. This paper describes the methodological steps and results of the information system development - requirements elicitation, modeling, object-relational mapping, implementation and system validation.

  5. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  6. Development of the bedridden person support system using hand gesture.

    Science.gov (United States)

    Ichimura, Kouhei; Magatani, Kazushige

    2015-08-01

    The purpose of this study is to support the bedridden and physically handicapped person who live independently. In this study, we developed Electric appliances control system that can be used on the bed. The subject can control Electric appliances using hand motion. Infrared sensors of a Kinect are used for the hand motion detection. Our developed system was tested with some normal subjects and results of the experiment were evaluated. In this experiment, all subjects laid on the bed and tried to control our system. As results, most of subjects were able to control our developed system perfectly. However, motion tracking of some subject's hand was reset forcibly. It was difficult for these subjects to make the system recognize his opened hand. From these results, we think if this problem will be improved our support system will be useful for the bedridden and physically handicapped persons.

  7. Intelligent Decision Support System for Bank Loans Risk Classification

    Institute of Scientific and Technical Information of China (English)

    杨保安; 马云飞; 俞莲

    2001-01-01

    Intelligent Decision Support System (IISS) for Bank Loans Risk Classification (BLRC), based on the way of integration Artificial Neural Network (ANN) and Expert System (ES), is proposed. According to the feature of BLRC, the key financial and non-financial factors are analyzed. Meanwhile, ES and Model Base (MB) which contain ANN are designed . The general framework,interaction and integration of the system are given. In addition, how the system realizes BLRC is elucidated in detail.

  8. AN EXPERT SYSTEM FOR SUPPORTING THE PRODUCTION OF PLEASURE BOATS

    Directory of Open Access Journals (Sweden)

    Tomasz GONCIARZ

    2013-07-01

    Full Text Available Expert systems can be defined as computer programs, whose main task is to simulate a human expert, usually in a narrow field of expertise. Possible applications of modern information technology are very extensive, ranging from medicine, geology and technology to applications in the field of economic and financial decision support. The purpose of this paper is to present the practical application of an expert system that supports the process of managing the production of yachts and has a high suitability for use in this application. Using the expert system described in the paper reduces the time during the design and production preparation process.

  9. Marketing decision support systems: Adoption, use and satisfaction.

    NARCIS (Netherlands)

    Wierenga, B.; Oude Ophuis, P.A.M.

    1997-01-01

    This paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors, user factors

  10. New genome sequence data and molecular tools promote the use of photosynthetic and edible cyanobacteria in bioregenerative systems to support human space exploration.

    Science.gov (United States)

    Leys, Natalie; Morin, Nicolas; Janssen, Paul; Mergeay, Max

    Cyanobacteria are daily used as nutritional supplements (e.g. Spirulina) and are considered for promising applications beyond Earth, in space, where they can play a crucial role in closed miniaturised biological waste recycling systems that are currently developed to support future long-term space missions. Cyanobacteria can be cultured with artificial light in controllable photobioreactors, and used for the efficient removal of CO2 from and production of O2 in the at-mosphere of the confined spacecraft, for removal of nitrate from waste water that is recycled to potable water, and as complementary food source. In this context, the filamentous cyanobac-terium Arthrospira sp. PCC 8005 was selected as part of the bio-regenerative life-support system MELiSSA from the European Space Agency. For bioprocess control and optimisation, the access to its genetic information and the development of molecular tools is crucial. Here we report on our efforts to determine the full genome of the cyanobacterium Arthrospira sp. PCC 8005. The obtained sequence data were analysed in detail to gain a better insight in the photosynthetic, nutritive, or potential toxic potential of this strain. In addition, the sensitivity of PCC 8005 to ionizing radiation was investigated because prolonged exposure of PCC 8005 to cosmic radiation in space might have a deleterious effect on its metabolism and oxygenic properties. To our knowledge, of the 6 different research groups across the globe trying to sequence Arthrospira strains, none of them, including us, were yet able to obtain a complete genome sequence. For Arthrospira sp. strain PCC 8005, we obtained 119 contigs (assembled in 16 scaffolds), representing 6,3 Mb, with 5,856 predicted protein-coding sequences (CDSs) and 176 genes encoding RNA. The PCC 8005 genome displays an unusual high number of large repeated sequences, covering around 8% of the genome, which likely hampered the sequenc-ing. The PCC 8005 genome is also ridden by mobile

  11. THE DECISION SUPPORT SYSTEM IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Ana V.Monica POP

    2013-10-01

    Full Text Available In the present paper we will try to analyze the Decision Support System (DSS and the way in which it is applied or not in the Romanian Small and Medium Sized Enterprises (SMEs (with examples. We also will see if the system is beneficial for these Romanian Enterprises. We analyzed through interviews 50 small and medium-sized Romanian enterprises. They do not accept their name to be published. As a consequence, we will present only the results. It is underlined in the conclusions the differences between the small and the medium size enterprises in respect of the models they are using. The most important benefits of DSS (generally are represented by increased efficiency, competitive advantages and better managerial process.

  12. TECHNICAL SUPPORT AS A BASIS OF HIGH AVAILABILITY LEVEL AND IT SYSTEM SERVICE QUALITY

    Directory of Open Access Journals (Sweden)

    Dejan Vidojevic

    2007-06-01

    Full Text Available This work presents the development and implementation methodology of technical support in IT1system operation. Methodology is developed and applied in realistic system (Information system of the Tax administration - DIS 2003, which is technically very complex and highly distributed. The results of IT system availability assessment and identification of the critical components are input parameters in the process of establishing of the technical support. The importance of technical support for achieving optimal IT system availability and IT service quality is assessed according to its operation during one year. The history of technical support system operation is a basis for further continuous improvement.

  13. Seismic response analysis of structural system subjected to multiple support excitation

    International Nuclear Information System (INIS)

    Wu, R.W.; Hussain, F.A.; Liu, L.K.

    1978-01-01

    In the seismic analysis of a multiply supported structural system subjected to nonuniform excitations at each support point, the single response spectrum, the time history, and the multiple response spectrum are the three commonly employed methods. In the present paper the three methods are developed, evaluated, and the limitations and advantages of each method assessed. A numerical example has been carried out for a typical piping system. Considerably smaller responses have been predicted by the time history method than that by the single response spectrum method. This is mainly due to the fact that the phase and amplitude relations between the support excitations are faithfully retained in the time history method. The multiple response spectrum prediction has been observed to compare favourably with the time history method prediction. Based on the present evaluation, the multiple response spectrum method is the most efficient method for seismic response analysis of structural systems subjected to multiple support excitation. (Auth.)

  14. Issues regarding the design and acceptance of intelligent support systems for reactor operators

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1992-01-01

    In this paper, factors relevant to the design and acceptance of intelligent support systems for the operation of nuclear power plants are enumerated and discussed. The central premise is that conventional expert systems which encode experiential knowledge in production rules are not a suitable vehicle for the creation of practical operator support systems. The principal difficulty is the need for real-time operation. This in turn means that intelligent support systems will have knowledge bases derived from temporally accurate plant models, inference engines that permit revisions in the search process so as to accommodate revised or new data, and man-machine interfaces that do not require any human input. Such systems will have to be heavily instrumented and the associated knowledge bases will require a hierarchical organization so as to emulate human approaches to analysis. Issues related to operator acceptance of intelligent support tools are then reviewed. Possible applications are described and the relative merits of the machine- and human-centered approaches to the implementation of intelligent support systems are enumerated. The paper concludes with a plea for additional experimental evaluations

  15. Genome sequence of "Candidatus Mycoplasma haemolamae" strain purdue, a red blood cell pathogen of alpacas (Vicugna pacos) and llamas (Lama glama).

    Science.gov (United States)

    Guimaraes, Ana M S; Toth, Balazs; Santos, Andrea P; do Nascimento, Naíla C; Kritchevsky, Janice E; Messick, Joanne B

    2012-11-01

    We report the complete genome sequence of "Candidatus Mycoplasma haemolamae," an endemic red-cell pathogen of camelids. The single, circular chromosome has 756,845 bp, a 39.3% G+C content, and 925 coding sequences (CDSs). A great proportion (49.1%) of these CDSs are organized into paralogous gene families, which can now be further explored with regard to antigenic variation.

  16. Genome Sequence of “Candidatus Mycoplasma haemolamae” Strain Purdue, a Red Blood Cell Pathogen of Alpacas (Vicugna pacos) and Llamas (Lama glama)

    OpenAIRE

    Guimaraes, Ana M. S.; Toth, Balazs; Santos, Andrea P.; do Nascimento, Naíla C.; Kritchevsky, Janice E.; Messick, Joanne B.

    2012-01-01

    We report the complete genome sequence of “Candidatus Mycoplasma haemolamae,” an endemic red-cell pathogen of camelids. The single, circular chromosome has 756,845 bp, a 39.3% G+C content, and 925 coding sequences (CDSs). A great proportion (49.1%) of these CDSs are organized into paralogous gene families, which can now be further explored with regard to antigenic variation.

  17. Analysis of Intel IA-64 Processor Support for Secure Systems

    National Research Council Canada - National Science Library

    Unalmis, Bugra

    2001-01-01

    .... Systems could be constructed for which serious security threats would be eliminated. This thesis explores the Intel IA-64 processor's hardware support and its relationship to software for building a secure system...

  18. Computerized Operator Support System – Phase II Development

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Thomas A.; Boring, Ronald L.; Lew, Roger T.; Thomas, Kenneth D.

    2015-02-01

    A computerized operator support system (COSS) prototype for nuclear control room process control is proposed and discussed. The COSS aids operators in addressing rapid plant upsets that would otherwise result in the shutdown of the power plant and interrupt electrical power generation, representing significant costs to the owning utility. In its current stage of development the prototype demonstrates four advanced functions operators can use to more efficiently monitor and control the plant. These advanced functions consist of: (1) a synthesized and intuitive high level overview display of system components and interrelations, (2) an enthalpy-based mathematical chemical and volume control system (CVCS) model to detect and diagnose component failures, (3) recommended strategies to mitigate component failure effects and return the plant back to pre-fault status, and (4) computer-based procedures to walk the operator through the recommended mitigation actions. The COSS was demonstrated to a group of operators and their feedback was collected. The operators responded positively to the COSS capabilities and features and indicated the system would be an effective operator aid. The operators also suggested several additional features and capabilities for the next iteration of development. Future versions of the COSS prototype will include additional plant systems, flexible computer-based procedure presentation formats, and support for simultaneous component fault diagnosis and dual fault synergistic mitigation action strategies to more efficiently arrest any plant upsets.

  19. Affordances and Constraints of Intelligent Decision Support for Military Command and Control : Three Case Studies of Support Systems

    OpenAIRE

    Leifler, Ola

    2011-01-01

    Researchers in military command and control (C2) have for several decades sought to help commanders by introducing automated, intelligent decision support systems. These systems are still not widely used, however, and some researchers argue that this may be due to those problems that are inherent in the relationship between the affordances of technology and the requirements by the specific contexts of work in military C2. In this thesis, we study some specific properties of three support tech...

  20. Improving lives through a bioartificial liver support system

    CSIR Research Space (South Africa)

    Naidoo, K

    2008-11-01

    Full Text Available This poster covers the development of a technology towards a novel bioartificial liver support system (BALSS) that is capable of providing liver functions, in patients with acute liver failure, while housed outside the body (extra corporeal...

  1. The verification of neutron activation analysis support system (cooperative research)

    Energy Technology Data Exchange (ETDEWEB)

    Sasajima, Fumio; Ichimura, Shigeju; Ohtomo, Akitoshi; Takayanagi, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Sawahata, Hiroyuki; Ito, Yasuo [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology; Onizawa, Kouji [Radiation Application Development Association, Tokai, Ibaraki (Japan)

    2000-12-01

    Neutron activation analysis support system is the system in which even the user who has not much experience in the neutron activation analysis can conveniently and accurately carry out the multi-element analysis of the sample. In this verification test, subjects such functions, usability, precision and accuracy of the analysis and etc. of the neutron activation analysis support system were confirmed. As a method of the verification test, it was carried out using irradiation device, measuring device, automatic sample changer and analyzer equipped in the JRR-3M PN-3 facility, and analysis software KAYZERO/SOLCOI based on the k{sub 0} method. With these equipments, calibration of the germanium detector, measurement of the parameter of the irradiation field and analysis of three kinds of environmental standard sample were carried out. The k{sub 0} method adopted in this system is primarily utilized in Europe recently, and it is the analysis method, which can conveniently and accurately carried out the multi-element analysis of the sample without requiring individual comparison standard sample. By this system, total 28 elements were determined quantitatively, and 16 elements with the value guaranteed as analytical data of the NIST (National Institute of Standards and Technology) environment standard sample were analyzed in the accuracy within 15%. This report describes content and verification result of neutron activation support system. (author)

  2. Decision support systems in water and wastewater treatment process selection and design: a review.

    Science.gov (United States)

    Hamouda, M A; Anderson, W B; Huck, P M

    2009-01-01

    The continuously changing drivers of the water treatment industry, embodied by rigorous environmental and health regulations and the challenge of emerging contaminants, necessitates the development of decision support systems for the selection of appropriate treatment trains. This paper explores a systematic approach to developing decision support systems, which includes the analysis of the treatment problem(s), knowledge acquisition and representation, and the identification and evaluation of criteria controlling the selection of optimal treatment systems. The objective of this article is to review approaches and methods used in decision support systems developed to aid in the selection, sequencing of unit processes and design of drinking water, domestic wastewater, and industrial wastewater treatment systems. Not surprisingly, technical considerations were found to dominate the logic of the developed systems. Most of the existing decision-support tools employ heuristic knowledge. It has been determined that there is a need to develop integrated decision support systems that are generic, usable and consider a system analysis approach.

  3. Tactical decision making under stress (TADMUS) decision support system

    OpenAIRE

    Morrison, Jeffrey G.; Kelly, Richard T.; Moore, Ronald A.; Hutchins, Susan G.

    1996-01-01

    A prototype decision support system (DSS) was developed to enhance Navy tactical decision making based on naturalistic decision processes. Displays were developed to support critical decision making tasks through recognition-primed and explanation-based reasoning processes and cognitive analysis of the decision making problems faced by Navy tactical officers in a shipboard Combat Information Center. Baseline testing in high intensity, peace keeping, littoral scenarios indicated...

  4. A model selection support system for numerical simulations of nuclear thermal-hydraulics

    International Nuclear Information System (INIS)

    Gofuku, Akio; Shimizu, Kenji; Sugano, Keiji; Yoshikawa, Hidekazu; Wakabayashi, Jiro

    1990-01-01

    In order to execute efficiently a dynamic simulation of a large-scaled engineering system such as a nuclear power plant, it is necessary to develop intelligent simulation support system for all phases of the simulation. This study is concerned with the intelligent support for the program development phase and is engaged in the adequate model selection support method by applying AI (Artificial Intelligence) techniques to execute a simulation consistent with its purpose and conditions. A proto-type expert system to support the model selection for numerical simulations of nuclear thermal-hydraulics in the case of cold leg small break loss-of-coolant accident of PWR plant is now under development on a personal computer. The steps to support the selection of both fluid model and constitutive equations for the drift flux model have been developed. Several cases of model selection were carried out and reasonable model selection results were obtained. (author)

  5. [Development of a medical equipment support information system based on PDF portable document].

    Science.gov (United States)

    Cheng, Jiangbo; Wang, Weidong

    2010-07-01

    According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

  6. A sustainable and affordable support system for rural healthcare delivery

    CSIR Research Space (South Africa)

    Barjis, J

    2013-12-01

    Full Text Available . The proposed system is decision support driven in that it supports medical staff (nurses, doctors) to decide on the course of intervention or further treatment based on the vital signs of the patients that are tele-monitored on a regular basis. This patient...

  7. Validation Support for Distributed Real-Time Embedded Systems in VDM++

    DEFF Research Database (Denmark)

    S. Fitzgerald, John; Gorm Larsen, Peter; Tjell, Simon

    2007-01-01

    We present a tool-supported approach to the validation of system-level timing properties in formal models of distributed real-time embedded systems. Our aim is to provide system architects with rapid feedback on the timing characteristics of alternative designs in the often volatile early stages ...

  8. Computerized operator support system for the JMTR: ARGUS

    International Nuclear Information System (INIS)

    Oyamada, R.; Yamamoto, K.; Ishii, Y.; Sekine, N.; Nemoto, N.

    1988-01-01

    ARGUS is computerized operator support system developed for the JMTR Function keybords, alphanumic keybords, and colour display terminals serve as comminication interface between ARGUS and operating personnel. ARGUS serves the following purposes; 1) data logging, 2) early abnormality detection, 3) presenting relevant and concentrated information to the operators to support their accurate judgment in case of abnormality occurrence, 4) save of time-historical data for diagnostics, and 5) data base necessary for JMTR operation and maintenance. ARGUS has been implemented on a VAX-11/750 with mos memories of 7.25 MB. (author)

  9. Separations technologies supporting the development of a deployable ATW system

    International Nuclear Information System (INIS)

    Laidler, J. J.

    2000-01-01

    A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The first several years of the program will be directed toward an elucidation of related technical issues and to the establishment, by means of comprehensive trade studies, of an optimum configuration of the elements of the chemical processing infrastructure required for support of the total ATW system. By adopting this sort of disciplined systems engineering approach, it is expected that development and demonstration costs can be minimized and that it will be possible to deploy an ATW system that is an environmentally sound and economically viable venture

  10. Design of an operator support system for online maintenance at nuclear power plant

    International Nuclear Information System (INIS)

    Chu Yongyue; Li Huwei; Gao Qiang; Yi Yan; Yang Ming

    2013-01-01

    Online maintenance based on reliability centered management is pivotal for the safe and economical operation of Nuclear Power Plant (NPP). This paper presents an operator support system through which the operators can effectively manage plant configuration and identify the weaknesses in plant operation. The proposed operator support system is based on the GO-FLOW, which is a success-oriented availability analysis methodology and can be used for evaluating phased missions. In this paper, the design of the proposed operator support system is introduced through a case study of the Auxiliary Feed Water System (AFWS). (author)

  11. Web-Centric Systems in Support of Argumentation, Negotiation, and Organizational Memory

    National Research Council Canada - National Science Library

    Vickers, Randal

    1997-01-01

    .... This medium will take advantage of the latest in web technologies while conducting a detailed analysis and design of a prototype web based decision support system to support on-line argumentation...

  12. A framework for AI-based nuclear design support system

    International Nuclear Information System (INIS)

    Furuta, Kazuo; Kondo, Shunsuke

    1991-01-01

    Nowadays many computer programs are being developed and used for the analytic tasks in nuclear reactor design, but experienced designers are still responsible for most of the synthetic tasks which are not amenable to algorithmic computer processes. Artificial intelligence (AI) is a promising technology to deal with these intractable tasks in design. In development of AI-based design support systems, it is desirable to choose a comprehensive framework based on the scientific theory of design. In this work a framework for AI-based design support systems for nuclear reactor design will be proposed based on an exploration model of design. The fundamental architectures of this framework will be described especially on knowledge representation, context management and design planning. (author)

  13. Controlled ecological life support system breadboard project, 1988

    Science.gov (United States)

    Knott, W. M.

    1990-01-01

    The Closed Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989 to 1993 are listed. The Biomass Production Chamber (BPC) became operational and tests of wheat as a single crop are nearing completion.

  14. A Textual Case-Based Mobile Phone Diagnosis Support System ...

    African Journals Online (AJOL)

    In this paper, a Mobile Phone Diagnosis Support System is presented as an extension to jCOLIBRI which accepts a problem and reasons with cases to provide a solution related to a new given problem. Experimental evaluation using some set of problems shows that the developed system predicts the solution that is ...

  15. Development of a computerized operator support system for BWR power plant

    International Nuclear Information System (INIS)

    Monta, K.; Sekimizu, K.; Sato, N.; Araki, T.; Mori, N.

    1985-01-01

    A computerized operator support system for BWR power plant has been developed since 1980 supported by the Japanese government. The main functions of the systems are post trip operational guidance, disturbance analysis, standby system management, operational margin monitoring and control rod operational guidance. The former two functions aim at protection against incidents during operation of nuclear power plants and the latter three functions aim at their prevention. As the final stage of the development, these functions are combined with the plant supervision function and are organized as an advanced man-machine interface for BWR power plant. During the above process, operator task analyses are performed to enable synthesis of these support functions for right fit to operator tasks and to realize a hierarchical structure for CRT displays for right fit to operators cognitive needs. (author)

  16. User`s manual of a support system for human reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yokobayashi, Masao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tamura, Kazuo

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user`s guide of the system. (author).

  17. Development of body weight support gait training system using antagonistic bi-articular muscle model.

    Science.gov (United States)

    Shibata, Yoshiyuki; Imai, Shingo; Nobutomo, Tatsuya; Miyoshi, Tasuku; Yamamoto, Shin-Ichiroh

    2010-01-01

    The purpose of this study is to develop a body weight support gait training system for stroke and spinal cord injury. This system consists of a powered orthosis, treadmill and equipment of body weight support. Attachment of the powered orthosis is able to fit subject who has difference of body size. This powered orthosis is driven by pneumatic McKibben actuator. Actuators are arranged as pair of antagonistic bi-articular muscle model and two pairs of antagonistic mono-articular muscle model like human musculoskeletal system. Part of the equipment of body weight support suspend subject by wire harness, and body weight of subject is supported continuously by counter weight. The powered orthosis is attached equipment of body weight support by parallel linkage, and movement of the powered orthosis is limited at sagittal plane. Weight of the powered orthosis is compensated by parallel linkage with gas-spring. In this study, we developed system that has orthosis powered by pneumatic McKibben actuators and equipment of body weight support. We report detail of our developed body weight support gait training system.

  18. Prototype of Decision Support System Development in Determining Raskin Recipients Candidate

    Directory of Open Access Journals (Sweden)

    D. Desriyanti

    2017-10-01

    Full Text Available Decision-making support systems for beneficiaries deserving of the poor are a decision support system that can be used as a tool for assessing the feasibility of providing assistance. The established system only knows the rankings of the population proposals, the population data that has not been stored in the population database, the population data that has not been integrated with the data category, the criteria data, and value data so it requires the process of data input. In the process of data collection methods used are Interviews, Observation, Documentation, Literature Review while the software development methodology used is Prototype. The process of making software by using Macromedia Dreamweaver, language programming used is PHP, Javascript, HTML, and Cascading Style Sheet (CSS. This research aims 1 Make the development of decision support system in giving assistance for the poor in Cekok Ponorogo. 2 Conduct the mapping for proposed poor family and received assistance in graphic form. The conclusions of the development of decision support systems are; 1 Population data stored in the form of database that facilitate the process of searching data. 2 The Recorded of the proposed data and who received assistance for each hamlet in Kelurahan Cekok Ponorogo in the form of a graph. 3 Reduce errors in the submission the proposed data of potential beneficiaries

  19. Improvements of MMI and operator support systems at the Leningrad NPP

    International Nuclear Information System (INIS)

    Rakitin, I.D.; Malkin, S.D.; Shalia, V.V.; Fedorov, E.M.; Koudiakov, M.M.; Stebenev, A.S.

    1998-01-01

    A practical need of MMI up-grade and inclusion of new Operator Support Systems is of utmost importance for the existing NPPs under the new safety related Russian and International demands, requirements and regulations. The given paper describes RandD work for RBMK-type reactors with using full scope simulator features. But its main results could be well implemented for other reactor types as well. Significant efforts to up-grade safety of RBMK and implement a set of additional Safety Support Systems are provided by the Russian Project Design Institutes and by the International Organizations and Communities. But these projects have been mostly developed without a proper verification and validation against the real plant operation modes and real Control Room circumstances, and with no justification of an operating crew demands and expectations. That unfavorable situation should be successfully changed by now with using the Training Support Center (TSC) created at the Leningrad NPP. It incorporates the full-scope and analytical simulators working in parallel with the prototypes of the expert and interactive systems to provide a new scope of RandD work. The development and adjustment of two state-of-the-art Operators' Support Systems with using the Simulators are described in the Paper. These systems have been developed by the joint RRC KI and LNPP team. (author)

  20. Infrastructure to Support Hydrologic Research: Information Systems

    Science.gov (United States)

    Lall, U.; Duffy, C j

    2001-12-01

    Hydrologic Sciences are inherently interdisciplinary. Consequently, a myriad state variables are of interest to hydrologists. Hydrologic processes transcend many spatial and temporal scales, and their measurements reflect a variety of scales of support. The global water cycle is continuously modified by human activity through changes in land use, alteration of rivers, irrigation and groundwater pumping and through a modification of atmospheric composition. Since water is a solvent and a medium of transport, the water cycle fundamentally influences other material and energy cycles. This metaphor extends to the function that a hydrologic research information system needs to provide, to facilitate discovery in earth systems science, and to improve our capability to manage resources and hazards in a sustainable manner. At present, we have a variety of sources that provide data useful for hydrologic analyses, that range from massive remote sensed data sets, to sparsely sampled historical and paleo data. Consequently, the first objective of the Hydrologic Information Systems (HIS) group is to design a data services system that makes these data accessible in a uniform and useful way for specific, prioritized research goals. The design will include protocols for archiving and disseminating data from the Long Term Hydrologic Observatories (LTHOs), and comprehensive modeling experiments. Hydrology has a rich tradition of mathematical and statistical modeling of processes. However, given limited data and access to it, and a narrow focus that has not exploited connections to climatic and ecologic processes (among others), there have been only a few forays into diagnostic analyses of hydrologic fields, to identify and evaluate spatial and process teleconnections and an appropriate reduced space for modeling and understanding systems. The HIS initiative consequently proposes an investment in research and the provision of toolboxes to facilitate such analyses using the data