WorldWideScience

Sample records for support proposal analysis

  1. Developing Support Systems for Supporting Entrepreneurs and Small Business in Agrotechnology in Kluang, Johor : A Proposal Using the Cluster Based Approach

    OpenAIRE

    Chieng, Ngee Yew Clifford

    2013-01-01

    The aim of this report is to conduct a study on a proposal to develop support systems for entrepreneurs and small businesses in agrotechnology (“Proposal”). The study of the Proposal will include the use of a cluster-based approach to evaluate and guide the planned development of three pieces of land (“Proposed Land”) with a total combined area of approximately 60 acres in the district of Kluang, Johor, Malaysia. This report will begin with an overview and an analysis of the agriculture secto...

  2. APT/LEDA RFQ and support frame structural analysis

    International Nuclear Information System (INIS)

    Ellis, S.

    1997-01-01

    This report documents structural analysis of the Accelerator Production of Tritium Low Energy Demonstration Accelerator (APT/LEDA) Radio Frequency Quadrupole (RFQ) accelerator structure and its associated support frame. This work was conducted for the Department of Energy in support of the APT/LEDA. Structural analysis of the RFQ was performed to quantify stress levels and deflections due to both vacuum loading and gravity loading. This analysis also verified the proposed support scheme geometry and quantified interface loads. This analysis also determined the necessary stiffness and strength requirements of the RFQ support frame verifying the conceptual design geometry and allowing specification of individual frame elements. Complete structural analysis of the frame was completed subsequently. This report details structural analysis of the RFQ assembly with regard to gravity and vacuum loads only. Thermally induced stresses from the Radio Frequency (RF) surface resistance heating were not considered

  3. A proposed clinical research support career pathway for noninvestigators.

    Science.gov (United States)

    Smith, Sheree; Gullick, Janice; Ballard, Jacqueline; Perry, Lin

    2018-03-08

    To discuss the international experience of clinical research support for noninvestigator roles and to propose a new pathway for Australia, to promote a sustainable research support workforce capable of delivering high-quality clinical research. Noninvestigator research support roles are currently characterized by an ad hoc approach to training, with limited role delineation and perceived professional isolation with implications for study completion rates and participant safety. A focused approach to developing and implementing research support pathways has improved patient recruitment, study completion, job satisfaction, and research governance. The Queensland and New South Wales state-based Nurses' Awards, the Australian Qualifications Framework, and a University Professional (Research) Staff Award. Research nurses in the clinical environment improve study coordination, adherence to study protocol, patient safety, and clinical care. A career pathway that guides education and outlines position descriptions and skill sets would enhance development of the research support workforce. This pathway could contribute to changing the patient outcomes through coordination and study completion of high-quality research. A wide consultative approach is required to determine a cost-effective and feasible approach to implementation and evaluation of the proposed pathway. © 2018 John Wiley & Sons Australia, Ltd.

  4. MOOC Success Factors: Proposal of an Analysis Framework

    Directory of Open Access Journals (Sweden)

    Margarida M. Marques

    2017-10-01

    Full Text Available Aim/Purpose: From an idea of lifelong-learning-for-all to a phenomenon affecting higher education, Massive Open Online Courses (MOOCs can be the next step to a truly universal education. Indeed, MOOC enrolment rates can be astoundingly high; still, their completion rates are frequently disappointingly low. Nevertheless, as courses, the participants’ enrolment and learning within the MOOCs must be considered when assessing their success. In this paper, the authors’ aim is to reflect on what makes a MOOC successful to propose an analysis framework of MOOC success factors. Background: A literature review was conducted to identify reported MOOC success factors and to propose an analysis framework. Methodology: This literature-based framework was tested against data of a specific MOOC and refined, within a qualitative interpretivist methodology. The data were collected from the ‘As alterações climáticas nos média escolares - Clima@EduMedia’ course, which was developed by the project Clima@EduMedia and was submitted to content analysis. This MOOC aimed to support science and school media teachers in the use of media to teach climate change Contribution: By proposing a MOOC success factors framework the authors are attempting to contribute to fill in a literature gap regarding what concerns criteria to consider a specific MOOC successful. Findings: This work major finding is a literature-based and empirically-refined MOOC success factors analysis framework. Recommendations for Practitioners: The proposed framework is also a set of best practices relevant to MOOC developers, particularly when targeting teachers as potential participants. Recommendation for Researchers: This work’s relevance is also based on its contribution to increasing empirical research on MOOCs. Impact on Society: By providing a proposal of a framework on factors to make a MOOC successful, the authors hope to contribute to the quality of MOOCs. Future Research: Future

  5. Geo-environmental zoning using physiographic compartmentalization: a proposal for supporting sustainable decision-making

    Directory of Open Access Journals (Sweden)

    CLAUDIA V.S. CORRÊA

    Full Text Available ABSTRACT The geo-environmental zoning represents an important strategy in the territorial management. However, it requires a logical and structured procedure. Therefore, an approach using physiographic compartmentalization is proposed and applied as case study in a region covered by the topographic maps of São José dos Campos and Jacareí, Brazil. This region has great geological and geomorphological peculiarities, beyond being a place with large human interventions because of its quickly economic growth. The methodology is based on photointerpretation techniques and remote sensing in GIS environment. As a result, seven geo-environmental zones were obtained from a weighted integration by multicriteria analysis of physiographic units with land-use classes. In conclusion, taking into account potentialities and limitations, the proposed approach can be considered able to support sustainable decision-making, being applicable in other regions.

  6. Preliminary Stress Analysis of an IHX Tube Support Plate in Prototype SFR

    International Nuclear Information System (INIS)

    Kim, Sung Kyun; Koo, Gyeong Hoi

    2013-01-01

    In this paper, the structural integrity about the conceptual design of IHX tube support plate was reviewed and the design should be changed because of its high stress concentration at the outer rim area. For reducing its maximum stress, two alternatives were proposed and reviewed for the structural integrity point of view. In both proposing support designs, the maximum stress decreases up to the stress design limit. Tube support plates (TSPs) of the intermediate heat exchanger (IHX) in Prototype GenIV Sodium Cooled Fast Reactor (PGSFR) act to horizontally support IHX tubes against hydraulic loadings and they have numerous flow holes where a primary sodium flows downward and secondary sodium flows upward. Due to its many penetrations, its geometric shape is quite complex and structurally its integrity is quite weaker than other parts. In this study, we investigated the structural integrity of the conceptually designed IHX tube support plate. In addition, TSP's supporting concepts were proposed to increase its structural integrity, and confirmed its integrity by using a finite element analysis

  7. Thermal stress analysis of gravity support system for ITER based on ANSYS

    International Nuclear Information System (INIS)

    Liang Shangming; Yan Xijiang; Huang Yufeng; Wang Xianzhou; Hou Binglin; Li Pengyuan; Jian Guangde; Liu Dequan; Zhou Caipin

    2009-01-01

    A method for building the finite element model of the gravity support system for International Thermonuclear Experimental Reactor (ITER) was proposed according to the characteristics of the gravity support system with the cyclic symmetry. A mesh dividing method, which has high precision and an acceptable calculating scale, was used, and a three dimensional finite element model for the toroidal 20 degree sector of the gravity support system was built by using ANSYS. Meantime, the steady-state thermal analysis and thermal-structural coupling analysis of the gravity support system were performed. The thermal stress distributions and the maximal thermal stress values of all parts of the gravity support system were obtained, and the stress intensity of parts of the gravity support system was analyzed. The results of thermal stress analysis lay the solid foundation for design and improvement for gravity supports system for ITER. (authors)

  8. Recommendations for a proposed standard for performing systems analysis

    International Nuclear Information System (INIS)

    LaChance, J.; Whitehead, D.; Drouin, M.

    1998-01-01

    In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

  9. Investigation and proposal of the system to affect nuclear fuel type authorization and analysis code certification

    International Nuclear Information System (INIS)

    2006-03-01

    In order to develop the system to affect more advanced and rational regulations of nuclear fuels and earlier introduction of new technologies in nuclear power plants, domestic and overseas safety regulation systems and state of their implementation for water cooled reactor fuel and safety analysis code had been investigated and new regulation system to affect nuclear fuel type authorization and analysis code certification was proposed. Topical report system for common parts related with nuclear fuel type authorization and analysis code certification was firstly proposed for knowledge base. Maintaining consistent safety examination supported by experts, introduction of domestic efficient system for lead irradiation test fuel, and analysis code certification and quality assurance were also proposed. (T. Tanaka)

  10. 48 CFR 915.404-2 - Information to support proposal analysis.

    Science.gov (United States)

    2010-10-01

    ... supporting price, cost, or financial analyst at the contracting activity shall determine the monetary impact... Policy, within the Headquarters procurement organization. (2)(i) The request for audit shall establish...

  11. Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

  12. Environmental analysis support

    International Nuclear Information System (INIS)

    Miller, R.L.

    1994-01-01

    Activities in environmental analysis support included assistance to the Morgantown and Pittsburgh Energy Technology Centers (METC and PETC) in reviewing and preparing documents required by the National Environmental Policy Act (NEPA) for several projects selected for the Clean Coal Technology (CCT) Program. A key milestone was the completion for PETC of the final Environmental Impact Statement (EIS) for the Healy Clean Coal Project (HCCP) in Healy, Alaska. This work is notable because it is the first site-specific EIS completed for the CCT Program. Another important activity was the preparation for METC of a draft Environmental Assessment (EA) for the Externally Fired Combined Cycle (EFCC) Project in Warren, Pennsylvania. Also, the final EA was completed for the Gasification Product Improvement Facility (GPIF), a proposed project near Morgantown, West Virginia, which is part of METC's R ampersand D Program. In addition, ORNL staff members published a Technical Memorandum entitled open-quotes Potential Effects of Clean Coal Technologies on Acid Precipitation, Greenhouse Gases, and Solid Waste Disposalclose quotes which documents the findings of three open-quotes white papersclose quotes prepared for DOE/FE

  13. Integration of a satellite ground support system based on analysis of the satellite ground support domain

    Science.gov (United States)

    Pendley, R. D.; Scheidker, E. J.; Levitt, D. S.; Myers, C. R.; Werking, R. D.

    1994-11-01

    This analysis defines a complete set of ground support functions based on those practiced in real space flight operations during the on-orbit phase of a mission. These functions are mapped against ground support functions currently in use by NASA and DOD. Software components to provide these functions can be hosted on RISC-based work stations and integrated to provide a modular, integrated ground support system. Such modular systems can be configured to provide as much ground support functionality as desired. This approach to ground systems has been widely proposed and prototyped both by government institutions and commercial vendors. The combined set of ground support functions we describe can be used as a standard to evaluate candidate ground systems. This approach has also been used to develop a prototype of a modular, loosely-integrated ground support system, which is discussed briefly. A crucial benefit to a potential user is that all the components are flight-qualified, thus giving high confidence in their accuracy and reliability.

  14. Mixed kernel function support vector regression for global sensitivity analysis

    Science.gov (United States)

    Cheng, Kai; Lu, Zhenzhou; Wei, Yuhao; Shi, Yan; Zhou, Yicheng

    2017-11-01

    Global sensitivity analysis (GSA) plays an important role in exploring the respective effects of input variables on an assigned output response. Amongst the wide sensitivity analyses in literature, the Sobol indices have attracted much attention since they can provide accurate information for most models. In this paper, a mixed kernel function (MKF) based support vector regression (SVR) model is employed to evaluate the Sobol indices at low computational cost. By the proposed derivation, the estimation of the Sobol indices can be obtained by post-processing the coefficients of the SVR meta-model. The MKF is constituted by the orthogonal polynomials kernel function and Gaussian radial basis kernel function, thus the MKF possesses both the global characteristic advantage of the polynomials kernel function and the local characteristic advantage of the Gaussian radial basis kernel function. The proposed approach is suitable for high-dimensional and non-linear problems. Performance of the proposed approach is validated by various analytical functions and compared with the popular polynomial chaos expansion (PCE). Results demonstrate that the proposed approach is an efficient method for global sensitivity analysis.

  15. Learning Algorithms for Audio and Video Processing: Independent Component Analysis and Support Vector Machine Based Approaches

    National Research Council Canada - National Science Library

    Qi, Yuan

    2000-01-01

    In this thesis, we propose two new machine learning schemes, a subband-based Independent Component Analysis scheme and a hybrid Independent Component Analysis/Support Vector Machine scheme, and apply...

  16. Using stakeholder analysis to support moves towards universal coverage: lessons from the SHIELD project.

    Science.gov (United States)

    Gilson, Lucy; Erasmus, Ermin; Borghi, Jo; Macha, Janet; Kamuzora, Peter; Mtei, Gemini

    2012-03-01

    Stakeholder analysis is widely recommended as a tool for gathering insights on policy actor interests in, positions on, and power to influence, health policy issues. Such information is recognized to be critical in developing viable health policy proposals, and is particularly important for new health care financing proposals that aim to secure universal coverage (UC). However, there remain surprisingly few published accounts of the use of stakeholder analysis in health policy development generally, and health financing specifically, and even fewer that draw lessons from experience about how to do and how to use such analysis. This paper, therefore, aims to support those developing or researching UC reforms to think both about how to conduct stakeholder analysis, and how to use it to support evidence-informed pro-poor health policy development. It presents practical lessons and ideas drawn from experience of doing stakeholder analysis around UC reforms in South Africa and Tanzania, combined with insights from other relevant material. The paper has two parts. The first presents lessons of experience for conducting a stakeholder analysis, and the second, ideas about how to use the analysis to support policy design and the development of actor and broader political management strategies. Comparison of experience across South Africa and Tanzania shows that there are some commonalities concerning which stakeholders have general interests in UC reform. However, differences in context and in reform proposals generate differences in the particular interests of stakeholders and their likely positioning on reform proposals, as well as in their relative balance of power. It is, therefore, difficult to draw cross-national policy comparisons around these specific issues. Nonetheless, the paper shows that cross-national policy learning is possible around the approach to analysis, the factors influencing judgements and the implications for, and possible approaches to, management

  17. Energy Savings Analysis of the Proposed NYStretch-Energy Code 2018

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chen, Yan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Edelson, Jim [New Buildings Inst. (NBI), Portland, OR (United States); Lyles, Mark [New Buildings Inst. (NBI), Portland, OR (United States)

    2018-01-20

    This study was conducted by the Pacific Northwest National Laboratory (PNNL) in support of the stretch energy code development led by the New York State Energy Research and Development Authority (NYSERDA). In 2017 NYSERDA developed its 2016 Stretch Code Supplement to the 2016 New York State Energy Conservation Construction Code (hereinafter referred to as “NYStretch-Energy”). NYStretch-Energy is intended as a model energy code for statewide voluntary adoption that anticipates other code advancements culminating in the goal of a statewide Net Zero Energy Code by 2028. Since then, NYSERDA continues to develop the NYStretch-Energy Code 2018 edition. To support the effort, PNNL conducted energy simulation analysis to quantify the energy savings of proposed commercial provisions of the NYStretch-Energy Code (2018) in New York. The focus of this project is the 20% improvement over existing commercial model energy codes. A key requirement of the proposed stretch code is that it be ‘adoptable’ as an energy code, meaning that it must align with current code scope and limitations, and primarily impact building components that are currently regulated by local building departments. It is largely limited to prescriptive measures, which are what most building departments and design projects are most familiar with. This report describes a set of energy-efficiency measures (EEMs) that demonstrate 20% energy savings over ANSI/ASHRAE/IES Standard 90.1-2013 (ASHRAE 2013) across a broad range of commercial building types and all three climate zones in New York. In collaboration with New Building Institute, the EEMs were developed from national model codes and standards, high-performance building codes and standards, regional energy codes, and measures being proposed as part of the on-going code development process. PNNL analyzed these measures using whole building energy models for selected prototype commercial buildings and multifamily buildings representing buildings in New

  18. Support system for loop device operator. Analysis of technological processes

    International Nuclear Information System (INIS)

    Yakovlev, V.V.; Mozhaev, A.A.; Lyadin, A.V.

    1988-01-01

    The paper presents the results obtained from the analysis of controlling the loops of a research reactor. A method of optimized interaction of the operator and hardware of the control system by computeraided identification of the cause of regime violation is considered. The equipment diagnostics based on use of the expert system methods and tuzzy algorithms enables to propose a support system for application in new generation of loops

  19. Supplement analysis for the proposed upgrades to the tank farm ventilation, instrumentation, and electrical systems under Project W-314 in support of tank farm restoration and safe operations

    International Nuclear Information System (INIS)

    1997-05-01

    The mission of the TWRS program is to store, treat, and immobilize highly radioactive tank waste in an environmentally sound, safe, and cost-effective manner. Within this program, Project W-314, Tank Farm Restoration and Safe Operations, has been established to provide upgrades in the areas of instrumentation and control, tank ventilation, waste transfer, and electrical distribution for existing tank farm facilities. Requirements for tank farm infrastructure upgrades to support safe storage were being developed under Project W-314 at the same time that the TWRS EIS alternative analysis was being performed. Project W-314 provides essential tank farm infrastructure upgrades to support continued safe storage of existing tank wastes until the wastes can be retrieved and disposed of through follow-on TWRS program efforts. Section4.0 provides a description of actions associated with Project W-314. The TWRS EIS analyzes the environmental consequences form the entire TWRS program, including actions similar to those described for Project W-314 as a part of continued tank farm operations. The TWRS EIS preferred alternative was developed to a conceptual level of detail to assess bounding impact areas. For this Supplement Analysis, in each of the potential impact areas for Project W-314, the proposed action was evaluated and compared to the TWRS EIS evaluation of the preferred alternative (Section 5.0). Qualitative and/or quantitative comparisons are then provided in this Supplement Analysis to support a determination on the need for additional National Environmental Policy Act (NEPA) analysis. Based on this Supplement Analysis, the potential impacts for Project W-314 would be small in comparison to and are bounded by the impacts assessed for the TWRS EIS preferred alternative, and therefore no additional NEPA analysis is required (Section 7.0)

  20. Proposals for ORNL [Oak Ridge National Laboratory] support to Tiber LLNL [Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Berry, L.A.; Rosenthal, M.W.; Saltmarsh, M.J.; Shannon, T.E.; Sheffield, J.

    1987-01-01

    This document describes the interests and capabilities of Oak Ridge National Laboratory in their proposals to support the Lawrence Livermore National Laboratory (LLNL) Engineering Test Reactor (ETR) project. Five individual proposals are cataloged separately. (FI)

  1. Benefit analysis of proposed information systems

    OpenAIRE

    Besore, Mark H.

    1991-01-01

    Approved for public release; distribution is unlimited This thesis reviewed two different approaches to benefit analysis, benefit comparison and user satisfaction, that could be applied to the evaluation of proposed information systems which are under consideration for acquisition by the federal government. Currently the General Services Administration only recommends that present value analysis methods be used in the analysis of alternatives even though the GSA specifies...

  2. Thermal–structural analysis of ITER triangular support for dominant load verification

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yu-Gyeong, E-mail: aspirany@hhi.co.kr [Hyundai Heavy Industries Co., Ltd., 1000, Bangeojinsunhwando-ro, Dong-gu, Ulsan (Korea, Republic of); Hwang, Jong-Hyun; Jung, Yung-Jin [Hyundai Heavy Industries Co., Ltd., 1000, Bangeojinsunhwando-ro, Dong-gu, Ulsan (Korea, Republic of); Kim, Hyun-Soo; Ahn, Hee-Jae [National Fusion Research Institute, 113 Gwahangno, Yuseong-gu, Daejeon-si (Korea, Republic of)

    2014-12-15

    Highlights: • The load combination method is introduced to thermal–structural analysis for contradictive loads occurred simultaneously. • The one-way coupling analysis also conducted for thermal–structural analysis and its validity is checked by comparing with the load combination. • The dominant load for triangular support bracket is determined as the baking condition. - Abstract: The triangular support is located on the lower inner shell of vacuum vessel of ITER, which should be designed to withstand various loads such as nuclear heat, coolant pressure and so on. The appropriateness of its design is evaluated under the dominant load that could represent the most conservative condition among the design loads. In order to decide the dominant load, a valid method for thermal–structural analysis is firstly verified considering contradictory behaviors between heat and structural loads. In this paper, two approaches; one-way coupling and load combination, are introduced for thermal–structural analysis. The one-way coupling is a method generally used but has a limit to apply on contradictory conditions. The load combination could give a proper solution since it evaluates each load independently and then adds up each result linearly. Based on the results of each case, structural analysis for another load case, baking condition with incident, is conducted to find out which load is dominant for triangular support. Consequently, it is found that the baking condition is the dominant load for triangular support bracket. The proposed load combination method gives a physically reasonable solution which can be used as a reference for checking the validity of other thermal–structural analysis. It is expected that these results could be applied for manufacturing design of the triangular support under various load conditions.

  3. Thermal–structural analysis of ITER triangular support for dominant load verification

    International Nuclear Information System (INIS)

    Kim, Yu-Gyeong; Hwang, Jong-Hyun; Jung, Yung-Jin; Kim, Hyun-Soo; Ahn, Hee-Jae

    2014-01-01

    Highlights: • The load combination method is introduced to thermal–structural analysis for contradictive loads occurred simultaneously. • The one-way coupling analysis also conducted for thermal–structural analysis and its validity is checked by comparing with the load combination. • The dominant load for triangular support bracket is determined as the baking condition. - Abstract: The triangular support is located on the lower inner shell of vacuum vessel of ITER, which should be designed to withstand various loads such as nuclear heat, coolant pressure and so on. The appropriateness of its design is evaluated under the dominant load that could represent the most conservative condition among the design loads. In order to decide the dominant load, a valid method for thermal–structural analysis is firstly verified considering contradictory behaviors between heat and structural loads. In this paper, two approaches; one-way coupling and load combination, are introduced for thermal–structural analysis. The one-way coupling is a method generally used but has a limit to apply on contradictory conditions. The load combination could give a proper solution since it evaluates each load independently and then adds up each result linearly. Based on the results of each case, structural analysis for another load case, baking condition with incident, is conducted to find out which load is dominant for triangular support. Consequently, it is found that the baking condition is the dominant load for triangular support bracket. The proposed load combination method gives a physically reasonable solution which can be used as a reference for checking the validity of other thermal–structural analysis. It is expected that these results could be applied for manufacturing design of the triangular support under various load conditions

  4. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    International Nuclear Information System (INIS)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations

  5. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations. (DLC)

  6. Integrated Information Technology Framework for Analysis of Data from Enrichment Plants to Support the Safeguards Mission

    International Nuclear Information System (INIS)

    Marr, Clifton T.; Thurman, David A.; Jorgensen, Bruce V.

    2008-01-01

    Many examples of software architectures exist that support process monitoring and analysis applications which could be applied to enrichment plants in a fashion that supports the Safeguards Mission. Pacific Northwest National Laboratory (PNNL) has developed mature solutions that will provide the framework to support online statistical analysis of enrichment plans and the entire nuclear fuel cycle. Most recently, PNNL has developed a refined architecture and supporting tools that address many of the common problems analysis and modeling environments experience: pipelining, handling large data volumes, and real-time performance. We propose the architecture and tools may be successfully used in furthering the goals of nuclear material control and accountability as both an aid to processing plant owners and as comprehensive monitoring for oversight teams.

  7. Analysis and proposal of the new architecture of the selected parts of the software support of the COMPASS experiment

    CERN Document Server

    Jary, Vladimir

    This work focuses on the data acquisition system of the Compass experiment at CERN. At first the database current subsystem that suffered from increased load during year 2009 is analysed. The reasons of problems are identified and new architecture that includes replication, backups, and monitoring for achieving the high availability and reliability is proposed and implemented. Several advanced database features including partitioned tables or storage engines are described and tested. Then, the process of implementation of the remote control and monitoring of the experiment is explained. As the existing data acquisition system is partly based on a deprecated technologies, development of a new architecture has started. We focus on requirements analysis and proposal of a control and monitoring software for the new hardware platform based on the FPGA technology. The software is to be deployed in a heterogenous network environment. According to the proposal, the system is built on the DIM communication library. Ro...

  8. Modal Analysis of a Simply Supported Steel Beam with Cracks under Temperature Load

    Directory of Open Access Journals (Sweden)

    Yijiang Ma

    2017-01-01

    Full Text Available Based on the transfer matrix method, an analytical method is proposed to conduct the modal analysis of the simply supported steel beam with multiple transverse open cracks under different temperatures. The open cracks are replaced with torsion springs without mass, and local flexibility caused by each crack can be derived; the temperature module is introduced by the mechanical properties variation of the structural material, and the temperature load is caused by the temperature variation, which can be transformed to the axial force on the cross-section. The transfer matrix of the whole beam with the temperature and geometric parameters of cracks can be obtained. According to boundary conditions of the simply supported beam, natural frequencies of the beam can be calculated, which are compared with the finite element results. Results indicate that the analytical method proposed has a high accuracy; the natural frequencies of the simply supported steel beam are mostly affected by the temperature load, which cannot be ignored.

  9. Theoretical Proposal for Pragmatic-Rhetorical Analysis of Argument in the Tourist Guide

    Directory of Open Access Journals (Sweden)

    MSc. Iliana Rosabal-Pérez

    2015-10-01

    Full Text Available The purpose of the article is to present a useful theoretical proposal for the analysis of argumentation within the guidebook genre. The study perspective is supported on the rhetorical-pragmatic perspective of argumentation provided by some authors as well as the theoretical models applied to the study of persuasion in guidebooks suggested by Adam/Bonhomme (1997, Hernández-Santaolalla and Cobo-Durán (2010. The analysis of argumentation in this kind of text must consider a tactical and strategic view of  the rhetorical actions; that is to say, not to abstain from the elocution traditional examination since argumentation is an essential devise obtainable in the whole test. Keywords: rhetorical, argumentation, guidebook, rhetorical operations, topical.

  10. Text localization using standard deviation analysis of structure elements and support vector machines

    Directory of Open Access Journals (Sweden)

    Zagoris Konstantinos

    2011-01-01

    Full Text Available Abstract A text localization technique is required to successfully exploit document images such as technical articles and letters. The proposed method detects and extracts text areas from document images. Initially a connected components analysis technique detects blocks of foreground objects. Then, a descriptor that consists of a set of suitable document structure elements is extracted from the blocks. This is achieved by incorporating an algorithm called Standard Deviation Analysis of Structure Elements (SDASE which maximizes the separability between the blocks. Another feature of the SDASE is that its length adapts according to the requirements of the application. Finally, the descriptor of each block is used as input to a trained support vector machines that classify the block as text or not. The proposed technique is also capable of adjusting to the text structure of the documents. Experimental results on benchmarking databases demonstrate the effectiveness of the proposed method.

  11. 77 FR 24766 - Call for Proposals for a Micro Support Program on International Conflict Resolution and...

    Science.gov (United States)

    2012-04-25

    ... UNITED STATES INSTITUTE OF PEACE Call for Proposals for a Micro Support Program on International Conflict Resolution and Peacebuilding For Immediate Release AGENCY: United States Institute of Peace. ACTION: Notice. SUMMARY: Micro Support Program on International Conflict Resolution and Peacebuilding...

  12. BUSTED BUTTE TEST FACILITY GROUND SUPPORT CONFIRMATION ANALYSIS

    International Nuclear Information System (INIS)

    Bonabian, S.

    1998-01-01

    The main purpose and objective of this analysis is to confirm the validity of the ground support design for Busted Butte Test Facility (BBTF). The highwall stability and adequacy of highwall and tunnel ground support is addressed in this analysis. The design of the BBTF including the ground support system was performed in a separate document (Reference 5.3). Both in situ and seismic loads are considered in the evaluation of the highwall and the tunnel ground support system. In this analysis only the ground support designed in Reference 5.3 is addressed. The additional ground support installed (still work in progress) by the constructor is not addressed in this analysis. This additional ground support was evaluated by the A/E during a site visit and its findings and recommendations are addressed in this analysis

  13. Design analysis of liquid metal pipe supports

    International Nuclear Information System (INIS)

    Margolin, L.L.; LaSalle, F.R.

    1979-02-01

    Design guidelines pertinent to liquid metal pipe supports are presented. The numerous complex conditions affecting the support stiffness and strength are addressed in detail. Topics covered include modeling of supports for natural frequency and stiffness calculations, support hardware components, formulas for deflection due to torsion, plate bending, and out-of-plane flexibility. A sample analysis and a discussion on stress analysis of supports are included. Also presented are recommendations for design improvements for increasing the stiffness of pipe supports and which were utilized in the FFTF system

  14. Simulation of dynamics behaviors for shipping equipment support with system dynamics analysis approach

    Directory of Open Access Journals (Sweden)

    Yang Song

    2015-05-01

    Full Text Available Purpose: The exactly and precisely supply of carrying spare parts has a crucial impact on support and could improve the performance of equipment. Spare parts support is the crux work which will be limited by spare parts allocation and support cost input. Reasonable support strategy can help in making good use of available resources and support the equipment in normal operational status. The purpose of this paper is to propose a dynamics model of spare parts support process based on considering the interaction of multiple factors, and explores the regulation of dynamics behavior in the system. In order to achieve the optimization strategy to improve the effect of support so that will enhance the relevant support parameters of equipment. Design/methodology/approach: Meditate the feedback relationship among some important factors of support that involve support cost, support time and maintenance ability. System dynamics theory is adopted to propose a dynamics model of spare parts support process, on the analysis of multiple factors and casual relationship to find some major ones which have crucial impact on spare parts support. Spare parts support cost and availability was regarded as the control objective, moreover, adjust the control paramours and improve the effect of cannibalization and lateral supply scheduling strategy for spares support. Findings: The factors of spare parts supply, demand and maintenance have relationship of control feedback, and adjust the value of some crucial factors can reduce the support cost and improve the availability value. The main finding is that adopting cannibalization strategy under condition of available materials can relieve the mission and operational availability decline caused by shortage of spare parts. Combining the lateral supply and cannibalization strategy can reduce the inventory of warship carrying spare parts. Practical implications: By controlling the value of key factors regarding aspect of spare

  15. 48 CFR 15.404-1 - Proposal analysis techniques.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Proposal analysis techniques. 15.404-1 Section 15.404-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assistance of other experts to ensure that an appropriate analysis is performed. (6) Recommendations or...

  16. Distributed support modelling for vertical track dynamic analysis

    Science.gov (United States)

    Blanco, B.; Alonso, A.; Kari, L.; Gil-Negrete, N.; Giménez, J. G.

    2018-04-01

    The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the 'pinned-pinned' vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.

  17. The Agile Rapid Global Combat Support (ARGCS) System: A Cost and Benefit Analysis of Including the ARGCS Technologies in the Acquisition of the Enhanced Consolidated Support System (ECASS)

    National Research Council Canada - National Science Library

    Lund, John N

    2007-01-01

    ...). The ultimate goal of this project is to assist in the analysis of the ARGCS technologies and what benefit they would provide if included in the proposed next generation of Naval Aviation test equipment, currently called the Enhanced Consolidated Automated Support System (ECASS).

  18. Elastic analysis of beam support impact

    International Nuclear Information System (INIS)

    Salmon, M.A.; Verma, V.K.; Youtsos, T.G.

    1982-01-01

    The effect of gaps present in the seismic supports of nuclear piping systems has been studied with the use of such large general purpose analysis codes as ANSYS. Exact analytical solutions to two simple beam impact problems are obtained to serve as benchmarks for the evaluation of the ability of such codes to model impact between beam elements and their supports. Bernoulli-Euler beam theory and modal analysis are used to obtain analytical solutions for the motion of simply supported and fixed ended beams after impact with a spring support at midspan. The solutions are valid up to the time the beam loses contact with the spring support. Numerical results are obtained which show that convergence for both contact force and bending moment at the point of impact is slower as spring stiffness is increased. Finite element solutions obtained with ANSYS are compared to analytical results and good agreement is obtained

  19. The proposed Diagnostic Instrumentation and Analysis Laboratory, Mississippi State University

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-01

    The Department of Energy (DOE) proposes to authorize Mississippi State University (MSU) to proceed with the detailed design, construction and equipping of the proposed Diagnostic Instrumentation and Analysis Laboratory (DIAL). DOE grant funds are available to the University for the limited purpose of performing preliminary studies, including analysis necessary to conduct this environmental assessment. The proposed facility would be located in the Mississippi Research and Technology Park, adjacent to the Mississippi Agriculture and Forestry Experiment Station campus in Starkville, Mississippi. Total project cost is estimated at $7,953,600. This proposed laboratory would be designed to conduct research into combustion devices related to waste management and environmental restoration that is of importance to industry and government. The proposed facility`s role would be to develop diagnostic instrumentation capabilities in the area of combustion and related processes.

  20. System for decision analysis support on complex waste management issues

    International Nuclear Information System (INIS)

    Shropshire, D.E.

    1997-01-01

    A software system called the Waste Flow Analysis has been developed and applied to complex environmental management processes for the United States Department of Energy (US DOE). The system can evaluate proposed methods of waste retrieval, treatment, storage, transportation, and disposal. Analysts can evaluate various scenarios to see the impacts to waste slows and schedules, costs, and health and safety risks. Decision analysis capabilities have been integrated into the system to help identify preferred alternatives based on a specific objectives may be to maximize the waste moved to final disposition during a given time period, minimize health risks, minimize costs, or combinations of objectives. The decision analysis capabilities can support evaluation of large and complex problems rapidly, and under conditions of variable uncertainty. The system is being used to evaluate environmental management strategies to safely disposition wastes in the next ten years and reduce the environmental legacy resulting from nuclear material production over the past forty years

  1. A Framework for the Analysis of Localized Corrosion at the Proposed Yucca Mountain Repository

    International Nuclear Information System (INIS)

    Payer, J H; Carroll, S A; Gdowski, G E; Rebak, R B; Michels, T C; Miller, M C; Henson, V E

    2006-01-01

    The proposed Repository presents a familiar materials performance application that is regularly encountered in energy, transportation and other industries. The widely accepted approach to dealing with materials performance is to identify the performance requirements, to determine the operating conditions to which materials will be exposed and to select materials of construction that perform well in those conditions. A special feature of the proposed Yucca Mountain Repository is the extremely long time frame of interest, i.e. 10,000's of years and longer. Thus, the time evolution of the environment in contact with waste package surfaces and the time evolution of corrosion damage that may result are of primary interest in the determination of expected performance. An approach is presented to the analysis of localized corrosion during a time period when it is possible for waters from drips and seepage to contact the waste package surfaces, and the analysis is demonstrated for the water chemistry of mixed salt solutions and a set of time-temperature-relative humidity profiles for a hot, mid and cool temperature waste package. Based on the analysis, there are large time periods when localized corrosion can not be supported, and no corrosion damage will occur. Further analysis can then focus on time periods when it is possible for localized corrosion to occur and the determination of the evolution of any corrosion damage

  2. Analysis of public comments on the proposed rule on nuclear power plant license renewal

    International Nuclear Information System (INIS)

    1991-12-01

    This report provides a summary and analysis of public comments on the proposed license renewal rule for the nuclear power plants (10 CFR Part 54) published in the Federal Register on 17 July 1990. It also documents the NRC's resolution of the issues raised by the commenters. Comments from 121 organizations and 76 individuals were reviewed and analyzed to identify the issues, including those pertaining to the adequacy of the licensing basis, the performance of an integrated plant assessment, backfit considerations, and need for public hearings. The analysis included grouping of commenters' views according to the issues raised. The public comments analyzed in this report were taken into consideration in the development of the final rule and revisions to the supporting documents

  3. Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, P.; Logan, J.; Bird, L.; Short, W.

    2009-05-01

    This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

  4. 48 CFR 815.404-1 - Proposal analysis techniques.

    Science.gov (United States)

    2010-10-01

    ... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 815.404-1 Proposal analysis... necessary for initial and revised pricing of all negotiated prime contracts, including subcontract pricing...

  5. Proposed minimum reporting standards for chemical analysis Chemical Analysis Working Group (CAWG) Metabolomics Standards Initiative (MSI)

    Science.gov (United States)

    Amberg, Alexander; Barrett, Dave; Beale, Michael H.; Beger, Richard; Daykin, Clare A.; Fan, Teresa W.-M.; Fiehn, Oliver; Goodacre, Royston; Griffin, Julian L.; Hankemeier, Thomas; Hardy, Nigel; Harnly, James; Higashi, Richard; Kopka, Joachim; Lane, Andrew N.; Lindon, John C.; Marriott, Philip; Nicholls, Andrew W.; Reily, Michael D.; Thaden, John J.; Viant, Mark R.

    2013-01-01

    There is a general consensus that supports the need for standardized reporting of metadata or information describing large-scale metabolomics and other functional genomics data sets. Reporting of standard metadata provides a biological and empirical context for the data, facilitates experimental replication, and enables the re-interrogation and comparison of data by others. Accordingly, the Metabolomics Standards Initiative is building a general consensus concerning the minimum reporting standards for metabolomics experiments of which the Chemical Analysis Working Group (CAWG) is a member of this community effort. This article proposes the minimum reporting standards related to the chemical analysis aspects of metabolomics experiments including: sample preparation, experimental analysis, quality control, metabolite identification, and data pre-processing. These minimum standards currently focus mostly upon mass spectrometry and nuclear magnetic resonance spectroscopy due to the popularity of these techniques in metabolomics. However, additional input concerning other techniques is welcomed and can be provided via the CAWG on-line discussion forum at http://msi-workgroups.sourceforge.net/ or http://Msi-workgroups-feedback@lists.sourceforge.net. Further, community input related to this document can also be provided via this electronic forum. PMID:24039616

  6. Supportability Analysis in LCI Environment

    OpenAIRE

    Dragan Vasiljevic; Ana Horvat

    2013-01-01

    Starting from the basic pillars of the supportability analysis this paper queries its characteristics in LCI (Life Cycle Integration) environment. The research methodology contents a review of modern logistics engineering literature with the objective to collect and synthesize the knowledge relating to standards of supportability design in e-logistics environment. The results show that LCI framework has properties which are in fully compatibility with the requirement of s...

  7. ECRB ALCOVE AND NICHE GROUND SUPPORT ANALYSIS

    International Nuclear Information System (INIS)

    J.W. Keifer

    1999-01-01

    The purpose of the analysis is to provide design bases for Enhanced Characterization of the Repository Block (ECRB) alcove and niche ground support drawings. The objective is to evaluate the ESF Alcove Ground Support Analysis (Ref 5.1) to determine if the calculations technically bound the ECRB alcoves and to address specific differences in the conditions and constraints

  8. Moving Forward: Positive Behavior Support and Applied Behavior Analysis

    Science.gov (United States)

    Tincani, Matt

    2007-01-01

    A controversy has emerged about the relationship between positive behavior support and applied behavior analysis. Some behavior analysts suggest that positive behavior support and applied behavior analysis are the same (e.g., Carr & Sidener, 2002). Others argue that positive behavior support is harmful to applied behavior analysis (e.g., Johnston,…

  9. Support vector machine and principal component analysis for microarray data classification

    Science.gov (United States)

    Astuti, Widi; Adiwijaya

    2018-03-01

    Cancer is a leading cause of death worldwide although a significant proportion of it can be cured if it is detected early. In recent decades, technology called microarray takes an important role in the diagnosis of cancer. By using data mining technique, microarray data classification can be performed to improve the accuracy of cancer diagnosis compared to traditional techniques. The characteristic of microarray data is small sample but it has huge dimension. Since that, there is a challenge for researcher to provide solutions for microarray data classification with high performance in both accuracy and running time. This research proposed the usage of Principal Component Analysis (PCA) as a dimension reduction method along with Support Vector Method (SVM) optimized by kernel functions as a classifier for microarray data classification. The proposed scheme was applied on seven data sets using 5-fold cross validation and then evaluation and analysis conducted on term of both accuracy and running time. The result showed that the scheme can obtained 100% accuracy for Ovarian and Lung Cancer data when Linear and Cubic kernel functions are used. In term of running time, PCA greatly reduced the running time for every data sets.

  10. Structural analysis of support structure for ITER vacuum vessel

    International Nuclear Information System (INIS)

    Takeda, Nobukazu; Ohmori, Junji; Nakahira, Masataka

    2004-12-01

    ITER vacuum vessel (VV) is a safety component confining radioactive materials such as tritium and activated dust. An independent VV support structure with multiple flexible plates located at the bottom of VV lower port is proposed. This independent concept has two advantages: (1) thermal load due to the temperature deference between VV and the lower temperature components such as TF coil becomes lower and (2) the other components such as TF coil is categorized as a non-safety component because of its independence from VV. Stress analyses have been performed to assess the integrity of the VV support structure using a precisely modeled VV structure. As a result, (1) the maximum displacement of the VV corresponding to the relative displacement between VV and TF coil is found to be 15 mm, much less than the current design value of 100 mm, and (2) the stresses of the whole VV system including VV support are estimated to be less than the allowable ones defined by ASME Section III Subsection NF, respectively. Based on these assessments, the feasibility of the proposed independent VV support has been verified as a VV support. (author)

  11. Economic analysis requirements in support of orbital debris regulatory policy

    Science.gov (United States)

    Greenberg, Joel S.

    1996-10-01

    As the number of Earth orbiting objects increases so does the potential for generating orbital debris with the consequent increase in the likelihood of impacting and damaging operating satellites. Various debris remediation approaches are being considered that encompass both in-orbit and return-to-Earth schema and have varying degrees of operations, cost, international competitiveness, and safety implications. Because of the diversity of issues, concerns and long-term impacts, there is a clear need for the setting of government policies that will lead to an orderly abatement of the potential orbital debris hazards. These policies may require the establishment of a supportive regulatory regime. The Department of Transportation is likely to have regulatory responsibilities relating to orbital debris stemming from its charge to protect the public health and safety, safety of property, and national security interests and foreign policy interests of the United States. This paper describes DOT's potential regulatory role relating to orbital debris remediation, the myriad of issues concerning the need for establishing government policies relating to orbital debris remediation and their regulatory implications, the proposed technological solutions and their economic and safety implications. Particular emphasis is placed upon addressing cost-effectiveness and economic analyses as they relate to economic impact analysis in support of regulatory impact analysis.

  12. Eliciting and receiving online support: using computer-aided content analysis to examine the dynamics of online social support.

    Science.gov (United States)

    Wang, Yi-Chia; Kraut, Robert E; Levine, John M

    2015-04-20

    Although many people with serious diseases participate in online support communities, little research has investigated how participants elicit and provide social support on these sites. The first goal was to propose and test a model of the dynamic process through which participants in online support communities elicit and provide emotional and informational support. The second was to demonstrate the value of computer coding of conversational data using machine learning techniques (1) by replicating results derived from human-coded data about how people elicit support and (2) by answering questions that are intractable with small samples of human-coded data, namely how exposure to different types of social support predicts continued participation in online support communities. The third was to provide a detailed description of these machine learning techniques to enable other researchers to perform large-scale data analysis in these communities. Communication among approximately 90,000 registered users of an online cancer support community was analyzed. The corpus comprised 1,562,459 messages organized into 68,158 discussion threads. Amazon Mechanical Turk workers coded (1) 1000 thread-starting messages on 5 attributes (positive and negative emotional self-disclosure, positive and negative informational self-disclosure, questions) and (2) 1000 replies on emotional and informational support. Their judgments were used to train machine learning models that automatically estimated the amount of these 7 attributes in the messages. Across attributes, the average Pearson correlation between human-based judgments and computer-based judgments was .65. Part 1 used human-coded data to investigate relationships between (1) 4 kinds of self-disclosure and question asking in thread-starting posts and (2) the amount of emotional and informational support in the first reply. Self-disclosure about negative emotions (beta=.24, Ponline support communities.

  13. The Environmental Advisory Service (EASe): a decision support system for comprehensive screening of local land-use development proposals and comparative evaluation of proposed land-use plans

    OpenAIRE

    K P White; A P Sage; F A Rodammer; C T Peters

    1985-01-01

    The Environmental Advisory Service (EASe) is a decision support system which can provide assistance to local planning agencies in selecting land-development alternatives or in formulating land-use plans. EASe offers a comprehensive and consistent procedure for rating either a development proposal or a proposed plan. This procedure is based upon qualitative assessments of the impact of developments or plans on the natural environment, zoning and land use. public and private services, transport...

  14. 75 FR 69129 - Proposed Revision of Information Collection: Comment Request National Medical Support Notice-Part B

    Science.gov (United States)

    2010-11-10

    ... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Revision of Information Collection: Comment Request National Medical Support Notice--Part B AGENCY: Employee Benefits Security... assess the impact of its collection requirements on respondents. Currently, the Employee Benefits...

  15. INTEGRATION OF MULTICRITERIA ANALYSIS INTO DECISION SUPPORT CONCEPT FOR URBAN ROAD INFRASTRUCTURE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Niksa Jajac

    2010-12-01

    Full Text Available Urban road infrastructure management deals with complex decision making process. There are several reasons for a complexity such as: multi-disciplinarity, lots of participants, huge quantity of information, limited budget, conflict goals and criteria. These facts indicate that decision making processes in urban road infrastructure management belong to ill-defined problems. In order to cope with such complexity and to help managers during decision making processes this research proposes an application of multicriteria methods. Therefore, a generic concept of decision support for urban road infrastructure management based on multicriteria analysis is proposed. Three multicriteria methods: AHP, SAW and PROMETHHE, in a combination with 0-1 programming are used. The main advantage of an application of multicriteria analysis is that all stakeholders could be objectively included into decision process. Therefore, setting up of criteria weights involves opinions from all stakeholders’ groups (stakeholders are divided into three characteristic groups. Evaluation of criteria importance (weights is based on three sets of opinions processed by Analytic Hierarchic Processing (AHP method. Three sets of criteria are then processed by Simple Additive Weighting (SAW method resulting in a final set of criteria weights. By using SAW method, relative importance of opinions of all three stakeholders’ groups is introduced. Collected data are then processed by PROMETHEE multicriteria methods. Proposed decision support concept is validated on the problem of improvement of one part of an urban road infrastructure system for a large urban area of town of Split. The concept is efficiently applied on several problems regarding parking garages: location selection, sub-project ranking, definition of an investment strategy.

  16. Evidence for proposed ICD-11 PTSD and complex PTSD: a latent profile analysis

    Directory of Open Access Journals (Sweden)

    Marylène Cloitre

    2013-05-01

    Full Text Available Background: The WHO International Classification of Diseases, 11th version (ICD-11, has proposed two related diagnoses, posttraumatic stress disorder (PTSD and complex PTSD within the spectrum of trauma and stress-related disorders. Objective: To use latent profile analysis (LPA to determine whether there are classes of individuals that are distinguishable according to the PTSD and complex PTSD symptom profiles and to identify potential differences in the type of stressor and severity of impairment associated with each profile. Method: An LPA and related analyses were conducted on 302 individuals who had sought treatment for interpersonal traumas ranging from chronic trauma (e.g., childhood abuse to single-incident events (e.g., exposure to 9/11 attacks. Results: The LPA revealed three classes of individuals: (1 a complex PTSD class defined by elevated PTSD symptoms as well as disturbances in three domains of self-organization: affective dysregulation, negative self-concept, and interpersonal problems; (2 a PTSD class defined by elevated PTSD symptoms but low scores on the three self-organization symptom domains; and (3 a low symptom class defined by low scores on all symptoms and problems. Chronic trauma was more strongly predictive of complex PTSD than PTSD and, conversely, single-event trauma was more strongly predictive of PTSD. In addition, complex PTSD was associated with greater impairment than PTSD. The LPA analysis was completed both with and without individuals with borderline personality disorder (BPD yielding identical results, suggesting the stability of these classes regardless of BPD comorbidity. Conclusion: Preliminary data support the proposed ICD-11 distinction between PTSD and complex PTSD and support the value of testing the clinical utility of this distinction in field trials. Replication of results is necessary.For the abstract or full text in other languages, please see Supplementary files under Article Tools online

  17. Analysis of a proposed crucial test of quantum mechanics

    International Nuclear Information System (INIS)

    Collett, M.J.; Loudon, R.

    1987-01-01

    An experiment based on an extension of the Einstein-Podolsky-Rosen argument has been proposed by Popper as a crucial test of the Copenhagen interpretation of quantum mechanics. Here the authors show, by a slightly more complete version of Popper's analysis, although still at a relatively primitive level of sophistication, that the proposed experiment does not in fact provide such a test. (author)

  18. Risk-informed profitability-based analysis support of nuclear power station balance-of-plant change management

    Energy Technology Data Exchange (ETDEWEB)

    Liming, J.K. [EQE International, Inc., An ABS Group Company, Irvine, CA (United States); Kee, E.J.; Grantom, C.R.; Richards, A.M. [STP Nuclear Operating Company, Wadsworth, TX (United States)

    2001-07-01

    In this paper, a three-phased method is proposed for the STP Nuclear Operating Company (STPNOC) Risk and Reliability Analysis Section (RRA) to perform analyses and decision-making support for the STPNOC Balance-of-Plant (BOP)Task Force in managing change to simultaneously optimize plant safety and maximize long-term return-on-asset (or profitability) for the South Texas Project Electric Generating Station (STPEGS). (authors)

  19. Risk-informed profitability-based analysis support of nuclear power station balance-of-plant change management

    International Nuclear Information System (INIS)

    Liming, J.K.; Kee, E.J.; Grantom, C.R.; Richards, A.M.

    2001-01-01

    In this paper, a three-phased method is proposed for the STP Nuclear Operating Company (STPNOC) Risk and Reliability Analysis Section (RRA) to perform analyses and decision-making support for the STPNOC Balance-of-Plant (BOP)Task Force in managing change to simultaneously optimize plant safety and maximize long-term return-on-asset (or profitability) for the South Texas Project Electric Generating Station (STPEGS). (authors)

  20. Semiotic-conceptual analysis: a proposal

    Science.gov (United States)

    Priss, Uta

    2017-07-01

    This paper provides the basic definitions of Semiotic-conceptual analysis (SCA), which is a mathematical modelling of signs as elements of a triadic relation. FCA concept lattices are constructed for each of the three sign components. It is demonstrated how core linguistic and semiotic notions (such as synonymy and icon) can be represented with SCA. While the usefulness of SCA has already been demonstrated in a number of applications and several propositions are proven in this paper, there are still many open questions as to what to do next with SCA. Therefore, this paper is meant as a proposal and encouragement for further development.

  1. An analysis model of the secondary tunnel lining considering ground-primary support-secondary lining interaction

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Seong-Ho; Chang, Seok-Bue [Yooshin Engineering Corporation, Seoul(Korea); Lee, Sang-Duk [Ajou University, Suwon(Korea)

    2002-06-30

    It is the common practice to over design the reinforcement for the secondary tunnel lining due to the lack of rational insight into the ground loosening loads, and due to the conservative application of the empirical design methods. The main loads of the secondary lining are the ground loosening loads and the ground water pressure, and the ground load is critical in the reinforcement design of the secondary lining in the case of drained tunnel. If the external load is absent around a tunnel. the reasons of the load for secondary tunnel lining are the deterioration of the primary supports such as shotcrete, steel rib, and rock bolts. Accordingly, the analysis method considering the ground-primary supports-secondary lining interaction should be required for the rational design of the secondary tunnel lining. In this paper, the interaction was conceptually described by the simple mass-spring model and the load transfer from the ground and primary supports to the secondary lining is showed by the ground-primary supports-secondary lining reaction curves for the theoretical solution of a circular tunnel, And also, the application of this proposed model to numerical analysis is verified in order to check the potential for the tunnel with the complex analysis conditions. (author). 8 refs., 2 tabs., 7 figs.

  2. A Proposal of Product Development Collaboration Method Using User Support Information and its Experimental Evaluation

    Science.gov (United States)

    Tanaka, Mitsuru; Kataoka, Masatoshi; Koizumi, Hisao

    As the market changes more rapidly and new products continue to get more complex and multifunctional, product development collaboration with competent partners and leading users is getting more important to come up with new products that are successful in the market in a timely manner. ECM (engineering chain management) and SCM (supply chain management) are supply-side approaches toward this collaboration. In this paper, we propose a demand-side approach toward product development collaboration with users based on the information gathered through user support interactions. The approach and methodology proposed here was applied to a real data set, and its effectiveness was verified.

  3. An analysis of pharmaceutical experience with decades of rat carcinogenicity testing: support for a proposal to modify current regulatory guidelines.

    Science.gov (United States)

    Sistare, Frank D; Morton, Daniel; Alden, Carl; Christensen, Joel; Keller, Douglas; Jonghe, Sandra De; Storer, Richard D; Reddy, M Vijayaraj; Kraynak, Andrew; Trela, Bruce; Bienvenu, Jean-Guy; Bjurström, Sivert; Bosmans, Vanessa; Brewster, David; Colman, Karyn; Dominick, Mark; Evans, John; Hailey, James R; Kinter, Lewis; Liu, Matt; Mahrt, Charles; Marien, Dirk; Myer, James; Perry, Richard; Potenta, Daniel; Roth, Arthur; Sherratt, Philip; Singer, Thomas; Slim, Rabih; Soper, Keith; Fransson-Steen, Ronny; Stoltz, James; Turner, Oliver; Turnquist, Susan; van Heerden, Marjolein; Woicke, Jochen; DeGeorge, Joseph J

    2011-06-01

    Data collected from 182 marketed and nonmarketed pharmaceuticals demonstrate that there is little value gained in conducting a rat two-year carcinogenicity study for compounds that lack: (1) histopathologic risk factors for rat neoplasia in chronic toxicology studies, (2) evidence of hormonal perturbation, and (3) positive genetic toxicology results. Using a single positive result among these three criteria as a test for outcome in the two-year study, fifty-two of sixty-six rat tumorigens were correctly identified, yielding 79% test sensitivity. When all three criteria were negative, sixty-two of seventy-six pharmaceuticals (82%) were correctly predicted to be rat noncarcinogens. The fourteen rat false negatives had two-year study findings of questionable human relevance. Applying these criteria to eighty-six additional chemicals identified by the International Agency for Research on Cancer as likely human carcinogens and to drugs withdrawn from the market for carcinogenicity concerns confirmed their sensitivity for predicting rat carcinogenicity outcome. These analyses support a proposal to refine regulatory criteria for conducting a two-year rat study to be based on assessment of histopathologic findings from a rat six-month study, evidence of hormonal perturbation, genetic toxicology results, and the findings of a six-month transgenic mouse carcinogenicity study. This proposed decision paradigm has the potential to eliminate over 40% of rat two-year testing on new pharmaceuticals without compromise to patient safety.

  4. A proposed clinical decision support architecture capable of supporting whole genome sequence information.

    Science.gov (United States)

    Welch, Brandon M; Loya, Salvador Rodriguez; Eilbeck, Karen; Kawamoto, Kensaku

    2014-04-04

    Whole genome sequence (WGS) information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS) offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR). A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1) each component of the architecture; (2) the interaction of the components; and (3) how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine.

  5. Structural Analysis of Cabinet Support under Static and Seismic Loads

    International Nuclear Information System (INIS)

    Jung, Kwangsub; Lee, Sangjin; Oh, Jinho

    2014-01-01

    The cabinet support consists of frames including steel channels and steel square tubes. Four tap holes for screw bolts are located on the support frame of a steel channel to fix the cabinet on the support. The channels and square tubes are assembled by welded joints. The cabinet supports are installed on the outer walls of the reactor concrete island. The KEPIC code, MNF, is used for the design of the cabinet support. In this work, the structural integrity of the cabinet support is analyzed under consideration of static and seismic loads. A 3-D finite element model of the cabinet support was developed. The structural integrity of the cabinet support under postulated service loading conditions was evaluated through a static analysis, modal analysis, and response spectrum analysis. From the structural analysis results, it was concluded that the structural integrity of the cabinet support is guaranteed

  6. Facility Safeguardability Analysis in Support of Safeguards by Design

    International Nuclear Information System (INIS)

    Wonder, E.F.

    2010-01-01

    The idea of 'Safeguards-by-Design' (SBD) means designing and incorporating safeguards features into new civil nuclear facilities at the earliest stages in the design process to ensure that the constructed facility is 'safeguardable,' i.e. will meet national and international nuclear safeguards requirements. Earlier consideration of safeguards features has the potential to reduce the need for costly retrofits of the facility and can result in a more efficient and effective safeguards design. A 'Facility Safeguardability Analysis' (FSA) would be a key step in Safeguards-by-Design that would link the safeguards requirements with the 'best practices', 'lessons learned', and design of the safeguards measures for implementing those requirements. The facility designer's nuclear safeguards experts would work closely with other elements of the project design team in performing FSA. The resultant analysis would support discussions and interactions with the national nuclear regulator (i.e. State System of Accounting for and Control of Nuclear Material - SSAC) and the IAEA for development and approval of the proposed safeguards system. FSA would also support the implementation of international safeguards by the IAEA, by providing them with a means to analyse and evaluate the safeguardability of facilities being designed and constructed - i.e. by independently reviewing and validating the FSA as performed by the design team. Development of an FSA methodology is part of a broader U.S. National Nuclear Security Administration program to develop international safeguards-by-design tools and guidance documents for use by facility designers. The NNSA NGSI -sponsored project team is looking, as one element of its work, at how elements of the methodology developed by the Generation IV International Forum's Working Group on Proliferation Resistance and Physical Protection can be adapted to supporting FSA. (author)

  7. 78 FR 36564 - 30-Day Notice of Proposed Information Collection: Delegated Processing for Certain 202 Supportive...

    Science.gov (United States)

    2013-06-18

    ... Information Collection: Delegated Processing for Certain 202 Supportive Housing for the Elderly Projects AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY: HUD has submitted the proposed information collection requirement described below to the Office of Management and Budget (OMB...

  8. Environmental impact assessment in Colombia: Critical analysis and proposals for improvement

    International Nuclear Information System (INIS)

    Toro, Javier; Requena, Ignacio; Zamorano, Montserrat

    2010-01-01

    The evaluation of Environmental Impact Assessment (EIA) systems is a highly recommended strategy for enhancing their effectiveness and quality. This paper describes an evaluation of EIA in Colombia, using the model and the control mechanisms proposed and applied in other countries by Christopher Wood and Ortolano. The evaluation criteria used are based on Principles of Environmental Impact Assessment Best Practice, such as effectiveness and control features, and they were contrasted with the opinions of a panel of Colombian EIA experts as a means of validating the results of the study. The results found that EIA regulations in Colombia were ineffective because of limited scope, inadequate administrative support and the inexistence of effective control mechanisms and public participation. This analysis resulted in a series of recommendations regarding the further development of the EIA system in Colombia with a view to improving its quality and effectiveness.

  9. Development of sacrificial support fixture using deflection analysis

    Science.gov (United States)

    Ramteke, Ashwini M.; Ashtankar, Kishor M.

    2018-04-01

    Sacrificial support fixtures are the structures used to hold the part during machining while rotating the part about the fourth axis of CNC machining. In Four axis CNC machining part is held in a indexer which is rotated about the fourth axis of rotation. So using traditional fixturing devices to hold the part during machining such as jigs, v blocks and clamping plates needs a several set ups, manufacturing time which increase the cost associated with it. Since the part is rotated about the axis of rotation in four axis CNC machining so using traditional fixturing devices to hold the part while machining we need to reorient the fixture each time for particular orientation of part about the axis of rotation. So our proposed methodology of fixture design eliminates the cost associate with the complicated fixture design for customized parts which in turn reduces the time of manufacturing of the fixtures. But while designing the layout of the fixtures it is found out that the machining the part using four axis CNC machining the accurate machining of the part is directly proportional to the deflection produced in a part. So to machine an accurate part the deflection produced in a part should be minimum. We assume that the deflection produced in a part is a result of the deflection produced in a sacrificial support fixture while machining. So this paper provides the study of the deflection checking in a part machined using sacrificial support fixture by using FEA analysis.

  10. An analysis of the proposed Airline Competition Enhancement Act

    OpenAIRE

    Smith, Janice S.

    1990-01-01

    Approved for public release, distribution is unlimited This analysis examines problem issues in the passenger airline industry and determines how the proposed Airline Competition Enhancement Act would impact these issues. A summarization of the history of airline deregulation is followed by an assessment of the factors that are contributing to the call for re-regulation. From this assessment, recommendations for changes to the proposed Airline Competition Enhancement Act are made. Lieut...

  11. A Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States); Short, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2009-05-01

    This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

  12. Analysis of operator support method based on intelligent dynamic interlock in lead-cooled fast reactor simulator

    International Nuclear Information System (INIS)

    Xu, Peng; Wang, Jianye; Yang, Minghan; Wang, Weitian; Bai, Yunqing; Song, Yong

    2017-01-01

    Highlights: • We development an operator support method based on intelligent dynamic interlock. • We offer an integrated aid system to reduce the working strength of operators. • The method can help operators avoid dangerous, irreversible operation. • This method can be used in the fusion research reactor in the further. - Abstract: In nuclear systems, operators have to carry out corrective actions when abnormal situations occur. However, operators might make mistakes under pressure. In order to avoid serious consequences of the human errors, a new method for operators support based on intelligent dynamic interlock was proposed. The new method based on full digital instrumentation and control system, contains real-time alarm analysis process, decision support process and automatic safety interlock process. Once abnormal conditions occur, necessary safety interlock parameter based on analysis of real-time alarm and decision support process can be loaded into human-machine interfaces and controllers automatically, and avoid human errors effectively. Furthermore, the new method can make recommendations for further use and development of this technique in nuclear power plant or fusion research reactor.

  13. Uncertainty and sensitivity analysis in performance assessment for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Helton, Jon C.; Hansen, Clifford W.; Sallaberry, Cédric J.

    2012-01-01

    Extensive work has been carried out by the U.S. Department of Energy (DOE) in the development of a proposed geologic repository at Yucca Mountain (YM), Nevada, for the disposal of high-level radioactive waste. As part of this development, a detailed performance assessment (PA) for the YM repository was completed in 2008 and supported a license application by the DOE to the U.S. Nuclear Regulatory Commission (NRC) for the construction of the YM repository. The following aspects of the 2008 YM PA are described in this presentation: (i) conceptual structure and computational organization, (ii) uncertainty and sensitivity analysis techniques in use, (iii) uncertainty and sensitivity analysis for physical processes, and (iv) uncertainty and sensitivity analysis for expected dose to the reasonably maximally exposed individual (RMEI) specified the NRC’s regulations for the YM repository. - Highlights: ► An overview of performance assessment for the proposed Yucca Mountain radioactive waste repository is presented. ► Conceptual structure and computational organization are described. ► Uncertainty and sensitivity analysis techniques are described. ► Uncertainty and sensitivity analysis results for physical processes are presented. ► Uncertainty and sensitivity analysis results for expected dose are presented.

  14. Functional design and implementation proposal of a tool to support collaborative knwoledge building

    Directory of Open Access Journals (Sweden)

    Iolanda Garcia Gonzalez

    2013-02-01

    Full Text Available 0 0 1 147 810 USAL 6 1 956 14.0 Normal 0 21 false false false ES JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ES; mso-fareast-language:EN-US;} This article describes the process of conceptualization and functional design of an electronic forum, which aims to facilitate learning processes based on communication, but also on collaboration and social knowledge building, and their monitoring and evaluation. The experience is based on an innovation project involving the design, development and pilot implementation of an asynchronous communication tool, in the context of the Open University of Catalonia (UOC virtual campus. The design of the tool is based on the analysis of different reference models regarding the use of technology to support collaborative learning and social knowledge building processes. In parallel, and after analyzing some models for the study of collaborative knowledge building processes in virtual environments, the article presents a proposal for the analysis and assessment of such processes mediated by asynchronous communication tools similar to the one designed.

  15. Solid waste accident analysis in support of the Savannah River Waste Management Environmental Impact Statement

    International Nuclear Information System (INIS)

    Copeland, W.J.; Crumm, A.T.; Kearnaghan, D.P.; Rabin, M.S.; Rossi, D.E.

    1994-07-01

    The potential for facility accidents and the magnitude of their impacts are important factors in the evaluation of the solid waste management addressed in the Environmental Impact Statement. The purpose of this document is to address the potential solid waste management facility accidents for comparative use in support of the Environmental Impact Statement. This document must not be construed as an Authorization Basis document for any of the SRS waste management facilities. Because of the time constraints placed on preparing this accident impact analysis, all accident information was derived from existing safety documentation that has been prepared for SRS waste management facilities. A list of facilities to include in the accident impact analysis was provided as input by the Savannah River Technology Section. The accident impact analyses include existing SRS waste management facilities as well as proposed facilities. Safety documentation exists for all existing and many of the proposed facilities. Information was extracted from this existing documentation for this impact analysis. There are a few proposed facilities for which safety analyses have not been prepared. However, these facilities have similar processes to existing facilities and will treat, store, or dispose of the same type of material that is in existing facilities; therefore, the accidents can be expected to be similar

  16. ESF GROUND SUPPORT - STRUCTURAL STEEL ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    T. Misiak

    1996-06-26

    The purpose and objective of this analysis are to expand the level of detail and confirm member sizes for steel sets included in the Ground Support Design Analysis, Reference 5.20. This analysis also provides bounding values and details and defines critical design attributes for alternative configurations of the steel set. One possible configuration for the steel set is presented. This analysis covers the steel set design for the Exploratory Studies Facility (ESF) entire Main Loop 25-foot diameter tunnel.

  17. Reasons For Physicians Not Adopting Clinical Decision Support Systems: Critical Analysis.

    Science.gov (United States)

    Khairat, Saif; Marc, David; Crosby, William; Al Sanousi, Ali

    2018-04-18

    Clinical decision support systems (CDSSs) are an integral component of today's health information technologies. They assist with interpretation, diagnosis, and treatment. A CDSS can be embedded throughout the patient safety continuum providing reminders, recommendations, and alerts to health care providers. Although CDSSs have been shown to reduce medical errors and improve patient outcomes, they have fallen short of their full potential. User acceptance has been identified as one of the potential reasons for this shortfall. The purpose of this paper was to conduct a critical review and task analysis of CDSS research and to develop a new framework for CDSS design in order to achieve user acceptance. A critical review of CDSS papers was conducted with a focus on user acceptance. To gain a greater understanding of the problems associated with CDSS acceptance, we conducted a task analysis to identify and describe the goals, user input, system output, knowledge requirements, and constraints from two different perspectives: the machine (ie, the CDSS engine) and the user (ie, the physician). Favorability of CDSSs was based on user acceptance of clinical guidelines, reminders, alerts, and diagnostic suggestions. We propose two models: (1) the user acceptance and system adaptation design model, which includes optimizing CDSS design based on user needs/expectations, and (2) the input-process-output-engagemodel, which reveals to users the processes that govern CDSS outputs. This research demonstrates that the incorporation of the proposed models will improve user acceptance to support the beneficial effects of CDSSs adoption. Ultimately, if a user does not accept technology, this not only poses a threat to the use of the technology but can also pose a threat to the health and well-being of patients. ©Saif Khairat, David Marc, William Crosby, Ali Al Sanousi. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 18.04.2018.

  18. Application of sensitivity analysis for optimized piping support design

    International Nuclear Information System (INIS)

    Tai, K.; Nakatogawa, T.; Hisada, T.; Noguchi, H.; Ichihashi, I.; Ogo, H.

    1993-01-01

    The objective of this study was to see if recent developments in non-linear sensitivity analysis could be applied to the design of nuclear piping systems which use non-linear supports and to develop a practical method of designing such piping systems. In the study presented in this paper, the seismic response of a typical piping system was analyzed using a dynamic non-linear FEM and a sensitivity analysis was carried out. Then optimization for the design of the piping system supports was investigated, selecting the support location and yield load of the non-linear supports (bi-linear model) as main design parameters. It was concluded that the optimized design was a matter of combining overall system reliability with the achievement of an efficient damping effect from the non-linear supports. The analysis also demonstrated sensitivity factors are useful in the planning stage of support design. (author)

  19. A tracking system for laboratory mice to support medical researchers in behavioral analysis.

    Science.gov (United States)

    Macrì, S; Mainetti, L; Patrono, L; Pieretti, S; Secco, A; Sergi, I

    2015-08-01

    The behavioral analysis of laboratory mice plays a key role in several medical and scientific research areas, such as biology, toxicology, pharmacology, and so on. Important information on mice behavior and their reaction to a particular stimulus is deduced from a careful analysis of their movements. Moreover, behavioral analysis of genetically modified mice allows obtaining important information about particular genes, phenotypes or drug effects. The techniques commonly adopted to support such analysis have many limitations, which make the related systems particularly ineffective. Currently, the engineering community is working to explore innovative identification and sensing technologies to develop new tracking systems able to guarantee benefits to animals' behavior analysis. This work presents a tracking solution based on passive Radio Frequency Identification Technology (RFID) in Ultra High Frequency (UHF) band. Much emphasis is given to the software component of the system, based on a Web-oriented solution, able to process the raw tracking data coming from a hardware system, and offer 2D and 3D tracking information as well as reports and dashboards about mice behavior. The system has been widely tested using laboratory mice and compared with an automated video-tracking software (i.e., EthoVision). The obtained results have demonstrated the effectiveness and reliability of the proposed solution, which is able to correctly detect the events occurring in the animals' cage, and to offer a complete and user-friendly tool to support researchers in behavioral analysis of laboratory mice.

  20. Data near processing support for climate data analysis

    Science.gov (United States)

    Kindermann, Stephan; Ehbrecht, Carsten; Hempelmann, Nils

    2016-04-01

    Climate data repositories grow in size exponentially. Scalable data near processing capabilities are required to meet future data analysis requirements and to replace current "data download and process at home" workflows and approaches. On one hand side, these processing capabilities should be accessible via standardized interfaces (e.g. OGC WPS), on the other side a large variety of processing tools, toolboxes and deployment alternatives have to be supported and maintained at the data/processing center. We present a community approach of a modular and flexible system supporting the development, deployment and maintenace of OGC-WPS based web processing services. This approach is organized in an open source github project (called "bird-house") supporting individual processing services ("birds", e.g. climate index calculations, model data ensemble calculations), which rely on basic common infrastructural components (e.g. installation and deployment recipes, analysis code dependencies management). To support easy deployment at data centers as well as home institutes (e.g. for testing and development) the system supports the management of the often very complex package dependency chain of climate data analysis packages as well as docker based packaging and installation. We present a concrete deployment scenario at the German Climate Computing Center (DKRZ). The DKRZ one hand side hosts a multi-petabyte climate archive which is integrated e.g. into the european ENES and worldwide ESGF data infrastructure, and on the other hand hosts an HPC center supporting (model) data production and data analysis. The deployment scenario also includes openstack based data cloud services to support data import and data distribution for bird-house based WPS web processing services. Current challenges for inter-institutionnal deployments of web processing services supporting the european and international climate modeling community as well as the climate impact community are highlighted

  1. A Proposed Clinical Decision Support Architecture Capable of Supporting Whole Genome Sequence Information

    Directory of Open Access Journals (Sweden)

    Brandon M. Welch

    2014-04-01

    Full Text Available Whole genome sequence (WGS information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR. A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1 each component of the architecture; (2 the interaction of the components; and (3 how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine.

  2. Supporting Space Systems Design via Systems Dependency Analysis Methodology

    Science.gov (United States)

    Guariniello, Cesare

    The increasing size and complexity of space systems and space missions pose severe challenges to space systems engineers. When complex systems and Systems-of-Systems are involved, the behavior of the whole entity is not only due to that of the individual systems involved but also to the interactions and dependencies between the systems. Dependencies can be varied and complex, and designers usually do not perform analysis of the impact of dependencies at the level of complex systems, or this analysis involves excessive computational cost, or occurs at a later stage of the design process, after designers have already set detailed requirements, following a bottom-up approach. While classical systems engineering attempts to integrate the perspectives involved across the variety of engineering disciplines and the objectives of multiple stakeholders, there is still a need for more effective tools and methods capable to identify, analyze and quantify properties of the complex system as a whole and to model explicitly the effect of some of the features that characterize complex systems. This research describes the development and usage of Systems Operational Dependency Analysis and Systems Developmental Dependency Analysis, two methods based on parametric models of the behavior of complex systems, one in the operational domain and one in the developmental domain. The parameters of the developed models have intuitive meaning, are usable with subjective and quantitative data alike, and give direct insight into the causes of observed, and possibly emergent, behavior. The approach proposed in this dissertation combines models of one-to-one dependencies among systems and between systems and capabilities, to analyze and evaluate the impact of failures or delays on the outcome of the whole complex system. The analysis accounts for cascading effects, partial operational failures, multiple failures or delays, and partial developmental dependencies. The user of these methods can

  3. US Department of Energy investments in natural gas R ampersand D: An analysis of the gas industry proposal

    International Nuclear Information System (INIS)

    Sutherland, R.J.

    1992-01-01

    The natural gas industry has proposed an increase in the DOE gas R ampersand D budget from about $100 million to about $250 million per year for each of the next 10 years. The proposal includes four programs: natural gas supplies, fuel cells, natural gas vehicles and stationary combustion systems. This paper is a qualitative assessment of the gas industry proposal and recommends a natural gas R ampersand D strategy for the DOE. The methodology is a conceptual framework based on an analysis of market failures and the energy policy objectives of the DOE's (1991) National Energy Strategy. This framework would assist the DOE in constructing an R ampersand D portfolio that achieves energy policy objectives. The natural gas supply program is recommended to the extent that it contributes to energy price stability. Stationary combustion programs are supported on grounds of economic efficiency and environmental quality. The fuel cell program is supported on grounds of environmental quality. The natural gas vehicle program may potentially contribute to environmental quality and energy price stability. The R ampersand D programs in natural gas vehicles and in fuel cells should be complemented with policies that encourage the commercialization and use of the technology, not merely its development

  4. Proposed Sources of Coaching Efficacy: A Meta-Analysis.

    Science.gov (United States)

    Myers, Nicholas D; Park, Sung Eun; Ahn, Soyeon; Lee, Seungmin; Sullivan, Philip J; Feltz, Deborah L

    2017-08-01

    Coaching efficacy refers to the extent to which a coach believes that he or she has the capacity to affect the learning and performance of his or her athletes. The purpose of the current study was to empirically synthesize findings across the extant literature to estimate relationships between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. A literature search yielded 20 studies and 278 effect size estimates that met the inclusion criteria. The overall relationship between the proposed sources of coaching efficacy and each dimension of coaching efficacy was positive and ranged from small to medium in size. Coach gender and level coached moderated the overall relationship between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. Results from this meta-analysis provided some evidence for both the utility of, and possible revisions to, the conceptual model of coaching efficacy.

  5. Perceptions of the usefulness of external support to immunization coverage in Chad: an analysis of the GAVI-Alliance cash-based support.

    Science.gov (United States)

    Ferrinho, Paulo; Dramé, Mohammed; Tumusiime, Prosper

    2013-01-01

    Chad is one of the countries supported by the GAVI-Alliance that remains with unsatisfactory vaccination coverage. This paper tries to understand the main barriers to better coverage. These barriers were categorised as up or downstream against the health system building blocks as proposed by WHO and compared with barriers and activities identified by the country in its health system's strengthening grant proposal as approved by the GAVI Alliance in 2007. Data were collected using a modified Delphi system and by analysis of grant and annual report documents. Most of the activities anticipated under the GAVI health system's strengthening proposal are activities targeting downstream barriers (the neglect of upstream issues is of major importance in a decentralised state like Chad) and aligned with, not complementary to, immunization services strengthening activities. Further, both set of cash grants are blind to important recommendations such as the need to address barriers at the level of leadership and governance and at the level of the financing system and also about initiatives to promote community demand of vaccination services. IN CHAD SLOW VACCINATION PROGRESS IS AGGRAVATED BY SEVERAL CONTEXTUAL BARRIERS: the size of the country, the low population density, the nomadic nature of a significant part of its peoples, the recent civil war, associated with civil unrest and political instability and its geographical localization. In this situation it would be important to sustain downstream operations (the major focus of the ISS grant) while taking a long term view of the needs of the health system. The GAVI effectively supports downstream operations, but neglects the long term view.

  6. AN EXCEL-BASED DECISION SUPPORT SYSTEM FOR SCORING AND RANKING PROPOSED R&D PROJECTS

    OpenAIRE

    ANNE DE PIANTE HENRIKSEN; SUSAN W. PALOCSAY

    2008-01-01

    One of the most challenging aspects of technology management is the selection of research and development (R&D) projects from among a group of proposals. This paper introduces an interactive, user-friendly decision support system for evaluating and ranking R&D projects and demonstrates its application on an example R&D program. It employs the scoring methodology developed by Henriksen and Traynor to provide a practical technique that considers both project merit and project cost in the evalua...

  7. A proposal of group decision making procedure for supporting social consensus making

    International Nuclear Information System (INIS)

    Shimizu, Yoshiaki

    1996-01-01

    Being interested in supporting social consensus making, in this paper, we have proposed a group decision making procedure through conflict resolution in the following situation: each group has a different privilege with decision making; the final goal should be evaluated by a few qualitative sub-goals besides quantitative ones. For this purpose, we have developed a step-wise procedure that has been popularly adapted when encountered with complicated and large-scale problem-solving. As well as at the value system design phase, we applied the analytic hierarchy process, AHP to decide weights standing for the privilege at the decision making phase. Then, after rearranging the hierarchy of the sub-goals depending on the nature, we have provided an iterative procedure to derive a final solution from a discrete optimization problem. To reduce the difficulties of multi-objective decision making thereat, we took a scoring method for total evaluation and applied the genetic algorithm as a solution method. Through numerical experiments applied to a planning problem of the radioactive waste management system, we have shown numerically the proposed approach is very promising for social consensus making. (author)

  8. Acculturation Strategies, Social Support, and Cross-Cultural Adaptation: A Mediation Analysis

    Science.gov (United States)

    Ng, Ting Kin; Tsang, Kwok Kuen; Lian, Yi

    2013-01-01

    Previous acculturation research has established the influences of acculturation strategies and social support on cross-cultural adaptation. The present study attempted to elaborate these direct associations by proposing that social support and the use of the integration and marginalization strategies might affect psychological adaptation…

  9. Development of output user interface software to support analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id [Center for Development of Nuclear Informatics - National Nuclear Energy Agency, PUSPIPTEK, Serpong, Tangerang, Banten (Indonesia)

    2014-09-30

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.

  10. Development of output user interface software to support analysis

    International Nuclear Information System (INIS)

    Wahanani, Nursinta Adi; Natsir, Khairina; Hartini, Entin

    2014-01-01

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu 239 and Pu 241 . Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis

  11. Geospatial analysis platform: Supporting strategic spatial analysis and planning

    CSIR Research Space (South Africa)

    Naude, A

    2008-11-01

    Full Text Available Whilst there have been rapid advances in satellite imagery and related fine resolution mapping and web-based interfaces (e.g. Google Earth), the development of capabilities for strategic spatial analysis and planning support has lagged behind...

  12. Patient Segmentation Analysis Offers Significant Benefits For Integrated Care And Support.

    Science.gov (United States)

    Vuik, Sabine I; Mayer, Erik K; Darzi, Ara

    2016-05-01

    Integrated care aims to organize care around the patient instead of the provider. It is therefore crucial to understand differences across patients and their needs. Segmentation analysis that uses big data can help divide a patient population into distinct groups, which can then be targeted with care models and intervention programs tailored to their needs. In this article we explore the potential applications of patient segmentation in integrated care. We propose a framework for population strategies in integrated care-whole populations, subpopulations, and high-risk populations-and show how patient segmentation can support these strategies. Through international case examples, we illustrate practical considerations such as choosing a segmentation logic, accessing data, and tailoring care models. Important issues for policy makers to consider are trade-offs between simplicity and precision, trade-offs between customized and off-the-shelf solutions, and the availability of linked data sets. We conclude that segmentation can provide many benefits to integrated care, and we encourage policy makers to support its use. Project HOPE—The People-to-People Health Foundation, Inc.

  13. Risk analysis within environmental impact assessment of proposed construction activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-15

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  14. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  15. Reliability analysis of idealized tunnel support system using probability-based methods with case studies

    Science.gov (United States)

    Gharouni-Nik, Morteza; Naeimi, Meysam; Ahadi, Sodayf; Alimoradi, Zahra

    2014-06-01

    In order to determine the overall safety of a tunnel support lining, a reliability-based approach is presented in this paper. Support elements in jointed rock tunnels are provided to control the ground movement caused by stress redistribution during the tunnel drive. Main support elements contribute to stability of the tunnel structure are recognized owing to identify various aspects of reliability and sustainability in the system. The selection of efficient support methods for rock tunneling is a key factor in order to reduce the number of problems during construction and maintain the project cost and time within the limited budget and planned schedule. This paper introduces a smart approach by which decision-makers will be able to find the overall reliability of tunnel support system before selecting the final scheme of the lining system. Due to this research focus, engineering reliability which is a branch of statistics and probability is being appropriately applied to the field and much effort has been made to use it in tunneling while investigating the reliability of the lining support system for the tunnel structure. Therefore, reliability analysis for evaluating the tunnel support performance is the main idea used in this research. Decomposition approaches are used for producing system block diagram and determining the failure probability of the whole system. Effectiveness of the proposed reliability model of tunnel lining together with the recommended approaches is examined using several case studies and the final value of reliability obtained for different designing scenarios. Considering the idea of linear correlation between safety factors and reliability parameters, the values of isolated reliabilities determined for different structural components of tunnel support system. In order to determine individual safety factors, finite element modeling is employed for different structural subsystems and the results of numerical analyses are obtained in

  16. Design and structural analysis of support structure for ITER vacuum vessel

    International Nuclear Information System (INIS)

    Takeda, Nobukazu; Ohmori, Junji; Nakahira, Masataka; Shibanuma, Kiyoshi

    2004-01-01

    The International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV) is a safety component confining radioactive materials such as tritium and activated dust. An independent VV support structure with multiple flexible plates located at the bottom of VV lower port is proposed as a new concept, which is deferent from the current design, i.e., the VV support is directly connected to the toroidal coils (TF coils). This independent concept has two advantages comparing to the current one: (1) thermal load due to the temperature deference between VV and TF coils becomes lower and (2) the TF coils are categorized as non-safety components because of its independence from VV. Stress Analyses have been performed to assess the integrity of the VV support structure using a precisely modeled VV structure. As a result, (1) the maximum displacement of the VV corresponding to the relative displacement between VV and TF coils is found to be 15 mm, much less than the current design clearance of 100 mm, and (2) the stresses of the whole VV system including VV support are estimated to be less than the allowable ones defined by ASME Section III Subsection NF, respectively. Based on these assessments, the feasibility of the proposed independent VV support has been verified as a VV support. (author)

  17. Method for Car in Dangerous Action Detection by Means of Wavelet Multi Resolution Analysis Based on Appropriate Support Length of Base Function

    OpenAIRE

    Kohei Arai; Tomoko Nishikawa

    2013-01-01

    Multi-Resolution Analysis: MRA based on the mother wavelet function with which support length differs from the image of the automobile rear under run is performed, and the run characteristic of a car is searched for. Speed, deflection, etc. are analyzed and the method of detecting vehicles with high accident danger is proposed. The experimental results show that vehicles in a dangerous action can be detected by the proposed method.

  18. Cost-benefit analysis for U.S. NRC proposed radiological criteria for decommissioning

    International Nuclear Information System (INIS)

    Meck, R.A.

    1995-01-01

    The U.S. Nuclear Regulatory Commission prepared cost-benefit analyses in support of the proposed regulation on radiological criteria for decommissioning. These analyses have been published in the Draft Generic Environmental Impact Statement (GEIS), NUREG-1496, and in the Draft Regulatory Analysis (RA). The method used was to first list the reasonable regulatory alternatives that could be considered. Second, for each regulatory alternative, we analyzed and compared the costs and the incremental radiological and non-radiological impacts to workers and members of the public. The regulatory alternatives for unrestricted use of a site that were analyzed and compared were: no regulatory change; a uniform risk based on total effective dose equivalent (TEDE); use of 'best' available technology; and returning the level of radioactivity attributable to licensed activity to background levels. The analyses were performed for ten types of reference facilities, and each facility was evaluated at low, medium, and high levels of contamination. The reference facilities included: reactors; various uranium and non-fuel cycle facilities; and independent spent fuel storage installations. Since both the radiological and non-radiological benefits were considered, the benefits of the various alternatives were measured in terms of 'Estimated Mortalities Averted.' Conclusions supported by the analyses were that a risk limit, expressed as a 15 mrem/y dose, is reasonable both as a level for protecting public health and safety and with regard to its cost-benefit effects. Further reductions on a site-specific application of the ALARA principle are also supported in the context of accounting for both the radiological and non-radiological effects in both the short and long terms. Restricted release is also supported when the same level of protection is provided in decommissioning those facilities that cannot reasonably meet the unrestricted release criteria. (J.P.N.)

  19. Archaeological Excavation Report for Proposed Well 199-K-131 in Support of the 100-KR-4 Pump-and-Treat Project

    Energy Technology Data Exchange (ETDEWEB)

    Woody, Dave M.; Prendergast-Kennedy, Ellen L.

    2004-06-22

    An archaeological excavation was conducted at the site of proposed groundwater monitoring well 199-K-131 in support of the 100-KR-4 Pump-and-Treat Project between June 2 and 3, 2004. Excavations confirmed that there were no intact cultural deposits at the proposed well location. This report was prepared to document the findings of the test excavation.

  20. Analysis Efforts Supporting NSTX Upgrades

    International Nuclear Information System (INIS)

    Zhang, H.; Titus, P.; Rogoff, P.; Zolfaghari, A.; Mangra, D.; Smith, M.

    2010-01-01

    The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

  1. Facility Safeguardability Analysis In Support of Safeguards-by-Design

    Energy Technology Data Exchange (ETDEWEB)

    Philip Casey Durst; Roald Wigeland; Robert Bari; Trond Bjornard; John Hockert; Michael Zentner

    2010-07-01

    The following report proposes the use of Facility Safeguardability Analysis (FSA) to: i) compare and evaluate nuclear safeguards measures, ii) optimize the prospective facility safeguards approach, iii) objectively and analytically evaluate nuclear facility safeguardability, and iv) evaluate and optimize barriers within the facility and process design to minimize the risk of diversion and theft of nuclear material. As proposed by the authors, Facility Safeguardability Analysis would be used by the Facility Designer and/or Project Design Team during the design and construction of the nuclear facility to evaluate and optimize the facility safeguards approach and design of the safeguards system. Through a process of “Safeguards-by-Design” (SBD), this would be done at the earliest stages of project conceptual design and would involve domestic and international nuclear regulators and authorities, including the International Atomic Energy Agency (IAEA). The benefits of the Safeguards-by-Design approach is that it would clarify at a very early stage the international and domestic safeguards requirements for the Construction Project Team, and the best design and operating practices for meeting these requirements. It would also minimize the risk to the construction project, in terms of cost overruns or delays, which might otherwise occur if the nuclear safeguards measures are not incorporated into the facility design at an early stage. Incorporating nuclear safeguards measures is straight forward for nuclear facilities of existing design, but becomes more challenging with new designs and more complex nuclear facilities. For this reason, the facility designer and Project Design Team require an analytical tool for comparing safeguards measures, options, and approaches, and for evaluating the “safeguardability” of the facility. The report explains how preliminary diversion path analysis and the Proliferation Resistance and Physical Protection (PRPP) evaluation

  2. Support analysis for safety analysis development for CANDU nuclear power plant

    International Nuclear Information System (INIS)

    Bedreaga, L.; Florescu, Gh.; Apostol, M.; Nitoi, M.

    2004-01-01

    Probabilistic Safety Assessment analysis (PSA) is a technique used to assess the safety of a nuclear power plant. Assessments of the nuclear plant systems/components from safety point of view consist in accomplishment of a lot of support analyses that are the base for the main analysis, in order to evaluate the impact of occurrences of abnormal states for these systems. Evaluation of initiating events frequency and components failure rate is based on underlying probabilistic theory and mathematic statistics. Some of these analyses are detailed analyses and are known very well in PSA. There are also some analyses, named support analyses for PSA, which are very important but less applicable because they involve a huge human effort and hardware facilities to accomplish. The usual methods applicable in PSA such as input data extracted from the specific documentation (operation procedures, testing procedures, maintenance procedures and so on) or conservative evaluation provide a high level of uncertainty for both input and output data. The paper describes support analysis required to improve the certainty level in evaluation of reliability parameters and also in the final results (either risk, reliability or safety assessment). (author)

  3. Alternate design of ITER cryostat skirt support system

    International Nuclear Information System (INIS)

    Pandey, Manish Kumar; Gupta, Girish Kumar; Bhardwaj, Anil Kumar; Jha, Saroj Kumar

    2015-01-01

    The skirt support of ITER cryostat is a support system which takes all the load of cryostat cylinder and dome during normal and operational condition. The present design of skirt support has full penetration weld joints at the bottom (shell to horizontal plate joint). To fulfill the requirements of tolerances and control the welding distortions, we have proposed to change the full penetration weld into fillet weld. A detail calculation is done to check the feasibility and structural impact due to proposed design. The calculations provide the size requirements of fillet weld. To verify the structural integrity during most severe load case, finite element analysis (FEA) has been done in line with ASME section VIII division 2. By FEA 'Plastic Collapse' and 'Local Failure' modes has been assessed. 5° sector of skirt clamp has been modeled in CATIA V5 R21 and used in FEA. Fillet weld at shell to horizontal plate joint has been modeled and symmetry boundary condition at ± 2.5° applied. 'Elastic Plastic Analysis' has been performed for the most severe loading case i.e. Category IV loading. The alternate design of Cryostat Skirt support system has been found safe by analysis against Plastic collapse and Local Failure Modes with load proportionality factor 2.3. Alternate design of Cryostat skirt support system has been done and validated by FEA. As per alternate design, the proposal of fillet weld has been implemented in manufacturing. (author)

  4. Systems analysis support to the waste management technology center

    International Nuclear Information System (INIS)

    Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

    1988-01-01

    This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

  5. Social Support and Work Stress: A Mixed Method Analysis

    Directory of Open Access Journals (Sweden)

    Vânia Lúcia Pereira de Andrade

    2017-12-01

    Full Text Available Occupational stress and coping strategies have increasingly become the focus of research for their applied feature. The aim of this study was to investigate how social support has helped people deal with stressful situations in the workplace. In order to reach this aim an exploratory mixed method embedded research design was conducted. Study 1, quantitative, described the level of satisfaction with social support and perceived organizational support by employing a scale that summarized factors of the perceived organizational support. Study 2, a qualitative one, sought to describe the stressors in the workplace environment, to whom the workers resorted to, and the kind of perceived social support. The group interview script was based on the dimensions proposed by Folkman e Lazarus (1985 model. Fifty-one volunteer workers participated in the study. Results showed a lack of social support in the workplace: incivility of colleagues and managers, psychological contract breach and conflict of values. Investments in personal development that stimulate urbanity in organizations and a listening space for employees are suggested actions that can benefit affective dimensions of work.

  6. FEM static analysis for the ITER gravity support system under the combined action of the dead weight and seismic loads

    International Nuclear Information System (INIS)

    Liang Shangming; Yan Xijiang; Mo Chunhua; Hou Binglin; Li Pengyuan; Jian Guangde; Liu Dequan; Zhou Caipin

    2010-01-01

    According to the characteristics of the gravity support system of ITER, a finite element static analysis method of the system was proposed. ANSYS was applied to built the three dimensional model of the system. A mesh dividing method,which has high precision and an acceptable calculating scale, was used. After the mesh of the model had been divided, the contact elements were defined on interfaces between volumes. The finite element static analysis of the gravity support system under the dead weight and seismic loads was performed. The stress distributions and the maximal stress values of all parts of the gravity support system were obtained, and the stress strength of the parts was analyzed. The results showed that the maximum stresses of the TF leg, the flexible-plate, the ring support and the support column occur respectively on the joint of TF leg and equivalent toroidal shell, at the corner of the weld joint of the flexible-plate and its lower flange, on the joint of the upper transverse plane and internal stiffening rib of the ring support, and on the support column's upper transverse plane. These maximum stresses are smaller than their respective allowable stress limits. All parts of the gravity support system have enough mechanical strength according to the ASME See. III-NF Code. The results of static analysis lay the solid foundation for the design and improvement of the gravity supports system of ITER. (authors)

  7. Simplified piping analysis methods with inelastic supports

    International Nuclear Information System (INIS)

    Lin, C.W.; Romanko, A.D.

    1986-01-01

    Energy absorbing supports (EAS) which contain x-shaped plates or dampers with heavy viscous fluid can absorb a large amount of energy during vibratory motions. The response of piping systems supported by these types of energy absorbing devices can be markedly reduced as compared with ordinary supports using rigid rods, hangers or snubbers. In this paper, a simple multiple support response spectrum technique is presented, which would allow the energy dissipation nature of the EAS be factored in the piping response calculation. In the meantime, the effect of lower system frequencies due to the reduced support stiffness from local yielding is also included in the analysis. Numerical results obtained show that this technique is more conservative than the time history solution by an acceptable and realistic margin; and it has less than 10 percent of the computation cost

  8. Seismic response analysis of a piping system subjected to multiple support excitations in a base isolated NPP building

    International Nuclear Information System (INIS)

    Surh, Han-Bum; Ryu, Tae-Young; Park, Jin-Sung; Ahn, Eun-Woo; Choi, Chul-Sun; Koo, Ja Choon; Choi, Jae-Boong; Kim, Moon Ki

    2015-01-01

    Highlights: • Piping system in the APR 1400 NPP with a base isolation design is studied. • Seismic response of piping system in base isolated building are investigated. • Stress classification method is examined for piping subjected to seismic loading. • Primary stress of piping is reduced due to base isolation design. • Substantial secondary stress is observed in the main steam piping. - Abstract: In this study, the stress response of the piping system in the advanced power reactor 1400 (APR 1400) with a base isolation design subjected to seismic loading is addressed. The piping system located between the auxiliary building with base isolation and the turbine building with a fixed base is considered since it can be subjected to substantial relative support movement during seismic events. First, the support responses with respect to the base characteristic are investigated to perform seismic analysis for multiple support excitations. Finite element analyses are performed to predict the piping stress response through various analysis methods such as the response spectrum, seismic support movement and time history method. To separately evaluate the inertial effect and support movement effect on the piping stress, the stress is decomposed into a primary and secondary stress using the proposed method. Finally, influences of the base isolation design on the piping system in the APR 1400 are addressed. The primary stress based on the inertial loading is effectively reduced in a base isolation design, whereas a considerable amount of secondary stress is generated in the piping system connecting a base isolated building with a fixed base building. It is also confirmed that both the response spectrum analysis and seismic support movement analysis provide more conservative estimations of the piping stress compared to the time history analysis

  9. Severe accident analysis methodology in support of accident management

    International Nuclear Information System (INIS)

    Boesmans, B.; Auglaire, M.; Snoeck, J.

    1997-01-01

    The author addresses the implementation at BELGATOM of a generic severe accident analysis methodology, which is intended to support strategic decisions and to provide quantitative information in support of severe accident management. The analysis methodology is based on a combination of severe accident code calculations, generic phenomenological information (experimental evidence from various test facilities regarding issues beyond present code capabilities) and detailed plant-specific technical information

  10. Stress analysis on a PWR pressure vessel support structure

    International Nuclear Information System (INIS)

    Cruz, J.R.B.; Mattar Neto, M.; Jesus Miranda, C.A. de.

    1992-01-01

    The paper presents the stress analysis of a research PWR vessel support structure. Different geometries and thermal boundary conditions are evaluated. The finite element analysis is performed using ANSYS program. The ASME Section III criteria are applied for the stress verification and the following points are discussed: stress classification and linearization; jurisdictional boundary between ASME Subsection NB (Class 1 Components) and Subsection NF (Component Supports). (author)

  11. Support system for Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Sasajima, Fumio; Ohtomo, Akitoshi; Sakurai, Fumio; Onizawa, Koji

    1999-01-01

    In the research reactor of JAERI, the Neutron Activation Analysis (NAA) has been utilized as a major part of an irradiation usage. To utilize NAA, research participants are always required to learn necessary technique. Therefore, we started to examine a support system that will enable to carry out INAA easily even by beginners. The system is composed of irradiation device, gamma-ray spectrometer and data analyzing instruments. The element concentration is calculated by using KAYZERO/SOLCOI software with the K 0 standardization method. In this paper, we review on a construction of this INAA support system in JRR-3M of JAERI. (author)

  12. Application of Expectation Maximization Method for Purchase Decision-Making Support in Welding Branch

    Directory of Open Access Journals (Sweden)

    Kujawińska Agnieszka

    2016-06-01

    Full Text Available The article presents a study of applying the proposed method of cluster analysis to support purchasing decisions in the welding industry. The authors analyze the usefulness of the non-hierarchical method, Expectation Maximization (EM, in the selection of material (212 combinations of flux and wire melt for the SAW (Submerged Arc Welding method process. The proposed approach to cluster analysis is proved as useful in supporting purchase decisions.

  13. Technical support for a proposed decay heat guide using SAS2H/ORIGEN-S data

    International Nuclear Information System (INIS)

    Hermann, O.W.; Parks, C.V.; Renier, J.P.

    1994-09-01

    Major revisions are proposed to the current US Nuclear Regulatory Commission decay heat rate guide entitled ''Regulatory Guide 3.54, Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation,'' using a new data base produced by the SAS2H analysis sequence of the SCALE-4 system. The data base for the proposed guide revision has been significantly improved by increasing the number and range of parameters that generally characterize pressurized-water-reactor (PWR) and boiling-water-reactor (BWR) spent fuel assemblies. Using generic PWR and BWR assembly models, calculations were performed with each model for six different burnups at each of three separate specific powers to produce heat rates at 20 cooling times in the range of 1 to 110 y. The proposed procedure specifies proper interpolation formulae for the tabulated heat generation rates. Adjustment formulae for the interpolated values are provided to account for differences in initial 235 U enrichment and changes in the specific power of a cycle from the average value. Finally, safety factor formulae were derived as a function of burnup, cooling time, and type of reactor. The proposed guide revision was designed to be easier to use. Also, the complete data base and guide procedure is incorporated into an interactive code called LWRARC which can be executed on a personal computer. The report shows adequate comparisons of heat rates computed by SAS2H/ORIGEN-S and measurements for 10 BWR and 10 PWR fuel assemblies. The average differences of the computed minus the measured heat rates of fuel assemblies were -07 ± 2.6% for the BWR and 1.5 ± 1.3% for the PWR. In addition, a detailed analysis of the proposed procedure indicated the method and equations to be valid

  14. A relational approach to support software architecture analysis

    NARCIS (Netherlands)

    Feijs, L.M.G.; Krikhaar, R.L.; van Ommering, R.C.

    1998-01-01

    This paper reports on our experience with a relational approach to support the analysis of existing software architectures. The analysis options provide for visualization and view calculation. The approach has been applied for reverse engineering. It is also possible to check concrete designs

  15. Engineering, Analysis and Technology FY 1995 Site Support Program Plan

    International Nuclear Information System (INIS)

    Suyama, R.M.

    1994-09-01

    The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

  16. QA CLASSIFICATION ANALYSIS OF GROUND SUPPORT SYSTEMS

    International Nuclear Information System (INIS)

    D. W. Gwyn

    1996-01-01

    The purpose and objective of this analysis is to determine if the permanent function Ground Support Systems (CI: BABEEOOOO) are quality-affecting items and if so, to establish the appropriate Quality Assurance (QA) classification

  17. Better economics: supporting adaptation with stakeholder analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chambwera, Muyeye; Zou, Ye; Boughlala, Mohamed

    2011-11-15

    Across the developing world, decision makers understand the need to adapt to climate change — particularly in agriculture, which supports a large proportion of low-income groups who are especially vulnerable to impacts such as increasing water scarcity or more erratic weather. But policymakers are often less clear about what adaptation action to take. Cost-benefit analyses can provide information on the financial feasibility and economic efficiency of a given policy. But such methods fail to capture the non-monetary benefits of adaptation, which can be even more important than the monetary ones. Ongoing work in Morocco shows how combining cost-benefit analysis with a more participatory stakeholder analysis can support effective decision making by identifying cross-sector benefits, highlighting areas of mutual interest among different stakeholders and more effectively assessing impacts on adaptive capacity.

  18. Marketing analysis support system; Marketing bunseki shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    Fuji Electric Co., Ltd., in collaboration with Shitashion Japan and Arthur Andersen Ltd., developed a 'marketing analysis support system' which integrally analyzes evaluation factors of various dimensions explaining consumers' purchasing behaviors and which supports business for the efficient operation of product development and demand prediction. This system breaks down products into each evaluation factor from psychological and physical viewpoints, and carries out various kinds of multivariate analysis, thereby making it easy to understand visually, for example, what evaluation factors decide relative positional relations between evaluation factors or between products as well as the position of a product in the whole. Further, more precise marketing analysis and prediction become possible by visually grasping blank areas of products, extent of competition, distribution of products, composition of product series, etc. (translated by NEDO)

  19. SPRITE: the Spitzer proposal review website

    Science.gov (United States)

    Crane, Megan K.; Storrie-Lombardi, Lisa J.; Silbermann, Nancy A.; Rebull, Luisa M.

    2008-07-01

    The Spitzer Science Center (SSC), located on the campus of the California Institute of Technology, supports the science operations of NASA's infrared Spitzer Space Telescope. The SSC issues an annual Call for Proposals inviting investigators worldwide to submit Spitzer Space Telescope proposals. The Spitzer Proposal Review Website (SPRITE) is a MySQL/PHP web database application designed to support the SSC proposal review process. Review panel members use the software to view, grade, and write comments about the proposals, and SSC support team members monitor the grading and ranking process and ultimately generate a ranked list of all the proposals. The software is also used to generate, edit, and email award letters to the proposers. This work was performed at the California Institute of Technology under contract to the National Aeronautics and Space Administration.

  20. Proposals on the establishment of the decision support systems for nuclear emergency management in China

    International Nuclear Information System (INIS)

    Qu Jingyuan; Wang Xingyu; Xue Dazhi; Shi Zhongqi; Xi Shuren; Cao Jianzhu

    2003-01-01

    As an important part of Chinese three-level nuclear emergency management system, decision support/accident consequence assessment systems have primarily been established at national, provincial and licensee levels. Valuable experience has been accumulated in the development, operation and maintenance of these systems. At the same time, more and more attention has been paid to their performance regarding to accurate judgment and forecast as well as the application of the information provided by them in a decision-making in the event of an accident. This paper briefly presents current status of the development and application of the systems in China. Then it discusses the need to establish a comprehensive network of decision support/accident consequence assessment systems based on the current systems built up at national, provincial and licensee levels. Finally, the way by which this ultimate goal can be achieved is proposed in this paper

  1. A proposal for performing software safety hazard analysis

    International Nuclear Information System (INIS)

    Lawrence, J.D.; Gallagher, J.M.

    1997-01-01

    Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper. The method concentrates on finding hazards during the early stages of the software life cycle, using an extension of HAZOP

  2. Perceived organizational support-burnout-satisfaction relationship in workers with disabilities: The moderation of family support.

    Science.gov (United States)

    Alcover, Carlos-María; Chambel, Maria José; Fernández, Juan José; Rodríguez, Fernando

    2018-05-02

    Our study tests the perceived organizational support-burnout-satisfaction relationship based on stressor-strain-outcome model of stress (Koeske & Koeske, ) and on the conservation of resources theory (Hobfoll, ) in workers with disabilities employed in ordinary or competitive jobs (open labor market), analyzing the relationship between perceived organizational support, family support, job satisfaction and burnout. We use a sample of 246 workers with physical, motor, sensory and psychological disabilities working in ordinary jobs. To test our proposed model we used a regression-based path analysis using PROCESS software, which is a computational tool for estimating and probing interactions and the conditional indirect effects of moderated mediation models. We find that the positive relationship between organizational support and job satisfaction was partially mediated by the levels of cynicism and the relationship between burnout and job satisfaction was moderated by family support. Employees with low support from family had identical job satisfaction with high burnout or low burnout, but employees with high support from family when they had high burnout had lower job satisfaction than when they had low burnout, indicating that the support outside work could have a negative effect in workers' life. Practical implications and future research are discussed and proposed. © 2018 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  3. Equipment Maintenance management support system based on statistical analysis of maintenance history data

    International Nuclear Information System (INIS)

    Shimizu, S.; Ando, Y.; Morioka, T.

    1990-01-01

    Plant maintenance is recently becoming important with the increase in the number of nuclear power stations and in plant operating time. Various kinds of requirements for plant maintenance, such as countermeasures for equipment degradation and saving maintenance costs while keeping up plant reliability and productivity, are proposed. For this purpose, plant maintenance programs should be improved based on equipment reliability estimated by field data. In order to meet these requirements, it is planned to develop an equipment maintenance management support system for nuclear power plants based on statistical analysis of equipment maintenance history data. The large difference between this proposed new method and current similar methods is to evaluate not only failure data but maintenance data, which includes normal termination data and some degree of degradation or functional disorder data for equipment and parts. So, it is possible to utilize these field data for improving maintenance schedules and to evaluate actual equipment and parts reliability under the current maintenance schedule. In the present paper, the authors show the objectives of this system, an outline of this system and its functions, and the basic technique for collecting and managing of maintenance history data on statistical analysis. It is shown, from the results of feasibility tests using simulation data of maintenance history, that this system has the ability to provide useful information for maintenance and the design enhancement

  4. Air quality impact analysis in support of the new production reactor environmental impact statement

    International Nuclear Information System (INIS)

    Hadley, D.L.

    1991-04-01

    The Pacific Northwest Laboratory (PNL) conducted this air quality impact analysis for the US Department of Energy (DOE). The purpose of this work was to provide Argonne National Laboratory (ANL) with the required estimates of ground-level concentrations of five criteria air pollutants at the Hanford Site boundary from each of the stationary sources associated with the new production reactor (NPR) and its supporting facilities. The DOE proposes to provide new production capacity for the primary production of tritium and secondary production of plutonium to support the US nuclear weapons program. Three alternative reactor technologies are being considered by DOE: the light-water reactor, the low-temperature, heavy-water reactor, and the modular high-temperature, gas-cooled reactor. In this study, PNL provided estimates of the impacts of the proposed action on the ground-level concentration of the criteria air pollutants for each of the alternative technologies. The criteria pollutants were sulfur dioxide, nitrogen dioxide, carbon monoxide, total suspended particulates, and particulates with a diameter of less than 10 microns. Ground-level concentrations were estimated for the peak construction phase activities expected to occur in 1997 and for the operational phase activities beginning in the year 2000. Ground-level concentrations of the primary air pollutants were estimated to be well below any of the applicable national or state ambient air quality standards. 12 refs., 19 tabs

  5. A Regional Decision Support Scheme for Pest Risk Analysis in Southeast Asia.

    Science.gov (United States)

    Soliman, T; MacLeod, A; Mumford, J D; Nghiem, T P L; Tan, H T W; Papworth, S K; Corlett, R T; Carrasco, L R

    2016-05-01

    A key justification to support plant health regulations is the ability of quarantine services to conduct pest risk analyses (PRA). Despite the supranational nature of biological invasions and the close proximity and connectivity of Southeast Asian countries, PRAs are conducted at the national level. Furthermore, some countries have limited experience in the development of PRAs, which may result in inadequate phytosanitary responses that put their plant resources at risk to pests vectored via international trade. We review existing decision support schemes for PRAs and, following international standards for phytosanitary measures, propose new methods that adapt existing practices to suit the unique characteristics of Southeast Asia. Using a formal written expert elicitation survey, a panel of regional scientific experts was asked to identify and rate unique traits of Southeast Asia with respect to PRA. Subsequently, an expert elicitation workshop with plant protection officials was conducted to verify the potential applicability of the developed methods. Rich biodiversity, shortage of trained personnel, social vulnerability, tropical climate, agriculture-dependent economies, high rates of land-use change, and difficulties in implementing risk management options were identified as challenging Southeast Asian traits. The developed methods emphasize local Southeast Asian conditions and could help support authorities responsible for carrying out PRAs within the region. These methods could also facilitate the creation of other PRA schemes in low- and middle-income tropical countries. © 2016 Society for Risk Analysis.

  6. Describing qualitative research undertaken with randomised controlled trials in grant proposals: a documentary analysis.

    Science.gov (United States)

    Drabble, Sarah J; O'Cathain, Alicia; Thomas, Kate J; Rudolph, Anne; Hewison, Jenny

    2014-02-18

    There is growing recognition of the value of conducting qualitative research with trials in health research. It is timely to reflect on how this qualitative research is presented in grant proposals to identify lessons for researchers and research commissioners. As part of a larger study focusing on how to maximise the value of undertaking qualitative research with trials, we undertook a documentary analysis of proposals of funded studies. Using the metaRegister of Controlled Trials (mRCT) database we identified trials funded in the United Kingdom, ongoing between 2001 and 2010, and reporting the use of qualitative research. We requested copies of proposals from lead researchers. We extracted data from the proposals using closed and open questions, analysed using descriptive statistics and content analysis respectively. 2% (89/3812) of trials in the mRCT database described the use of qualitative research undertaken with the trial. From these 89 trials, we received copies of 36 full proposals, of which 32 met our inclusion criteria. 25% used less than a single paragraph to describe the qualitative research. The aims of the qualitative research described in these proposals focused mainly on the intervention or trial conduct. Just over half (56%) of the proposals included an explicit rationale for conducting the qualitative research with the trial, the most frequent being to optimise implementation into clinical practice or to interpret trial findings. Key information about methods, expertise and resources was missing in a large minority of proposals, in particular sample size, type of analysis, and non-personnel resources. 28% specifically stated that qualitative researchers would conduct the qualitative research. Our review of proposals of successfully funded studies identified good practice but also identified limited space given to describing the qualitative research, with an associated lack of attention to the rationale for doing the qualitative research and

  7. A geostatistical approach to the change-of-support problem and variable-support data fusion in spatial analysis

    Science.gov (United States)

    Wang, Jun; Wang, Yang; Zeng, Hui

    2016-01-01

    A key issue to address in synthesizing spatial data with variable-support in spatial analysis and modeling is the change-of-support problem. We present an approach for solving the change-of-support and variable-support data fusion problems. This approach is based on geostatistical inverse modeling that explicitly accounts for differences in spatial support. The inverse model is applied here to produce both the best predictions of a target support and prediction uncertainties, based on one or more measurements, while honoring measurements. Spatial data covering large geographic areas often exhibit spatial nonstationarity and can lead to computational challenge due to the large data size. We developed a local-window geostatistical inverse modeling approach to accommodate these issues of spatial nonstationarity and alleviate computational burden. We conducted experiments using synthetic and real-world raster data. Synthetic data were generated and aggregated to multiple supports and downscaled back to the original support to analyze the accuracy of spatial predictions and the correctness of prediction uncertainties. Similar experiments were conducted for real-world raster data. Real-world data with variable-support were statistically fused to produce single-support predictions and associated uncertainties. The modeling results demonstrate that geostatistical inverse modeling can produce accurate predictions and associated prediction uncertainties. It is shown that the local-window geostatistical inverse modeling approach suggested offers a practical way to solve the well-known change-of-support problem and variable-support data fusion problem in spatial analysis and modeling.

  8. Citation analysis of Canadian psycho-oncology and supportive care researchers.

    Science.gov (United States)

    Hack, Thomas F; Crooks, Dauna; Plohman, James; Kepron, Emma

    2014-02-01

    The purpose of this study was to conduct a historical review of psycho-oncology and supportive care research in Canada using citation analysis and to review the clinical impact of the research conducted by the most highly cited researchers. The lifetime journal publication records of 109 psycho-oncology and supportive care researchers in Canada were subject to citation analysis using the Scopus database, based on citations since 1996 of articles deemed relevant to psychosocial oncology and supportive care, excluding self-citations. Three primary types of analysis were performed for each individual: the number of citations for each journal publication, a summative citation count of all published articles, and the Scopus h-index. The top 20 psycho-oncology/supportive care researchers for each of five citation categories are presented: the number of citations for all publications; the number of citations for first-authored publications; the most highly cited first-authored publications; the Scopus h-index for all publications; and the Scopus h-index for first-authored publications. The three most highly cited Canadian psycho-oncology researchers are Dr. Kerry Courneya (University of Alberta), Dr. Lesley Degner, (University of Manitoba), and Dr. Harvey Chochinov (University of Manitoba). Citation analysis is useful for examining the research performance of psycho-oncology and supportive care researchers and identifying leaders among them.

  9. The verification of neutron activation analysis support system (cooperative research)

    Energy Technology Data Exchange (ETDEWEB)

    Sasajima, Fumio; Ichimura, Shigeju; Ohtomo, Akitoshi; Takayanagi, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Sawahata, Hiroyuki; Ito, Yasuo [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology; Onizawa, Kouji [Radiation Application Development Association, Tokai, Ibaraki (Japan)

    2000-12-01

    Neutron activation analysis support system is the system in which even the user who has not much experience in the neutron activation analysis can conveniently and accurately carry out the multi-element analysis of the sample. In this verification test, subjects such functions, usability, precision and accuracy of the analysis and etc. of the neutron activation analysis support system were confirmed. As a method of the verification test, it was carried out using irradiation device, measuring device, automatic sample changer and analyzer equipped in the JRR-3M PN-3 facility, and analysis software KAYZERO/SOLCOI based on the k{sub 0} method. With these equipments, calibration of the germanium detector, measurement of the parameter of the irradiation field and analysis of three kinds of environmental standard sample were carried out. The k{sub 0} method adopted in this system is primarily utilized in Europe recently, and it is the analysis method, which can conveniently and accurately carried out the multi-element analysis of the sample without requiring individual comparison standard sample. By this system, total 28 elements were determined quantitatively, and 16 elements with the value guaranteed as analytical data of the NIST (National Institute of Standards and Technology) environment standard sample were analyzed in the accuracy within 15%. This report describes content and verification result of neutron activation support system. (author)

  10. A sequential factorial analysis approach to characterize the effects of uncertainties for supporting air quality management

    Science.gov (United States)

    Wang, S.; Huang, G. H.; Veawab, A.

    2013-03-01

    This study proposes a sequential factorial analysis (SFA) approach for supporting regional air quality management under uncertainty. SFA is capable not only of examining the interactive effects of input parameters, but also of analyzing the effects of constraints. When there are too many factors involved in practical applications, SFA has the advantage of conducting a sequence of factorial analyses for characterizing the effects of factors in a systematic manner. The factor-screening strategy employed in SFA is effective in greatly reducing the computational effort. The proposed SFA approach is applied to a regional air quality management problem for demonstrating its applicability. The results indicate that the effects of factors are evaluated quantitatively, which can help decision makers identify the key factors that have significant influence on system performance and explore the valuable information that may be veiled beneath their interrelationships.

  11. Problem solving in physics: research review, analysis, and a methodological proposal

    Directory of Open Access Journals (Sweden)

    Maria Helena Fávero

    2001-05-01

    Full Text Available This article presents a literature review on problem solving in Physics based on the scientific articles published in periodicals of the related field of study. The articles considered for this study were published in the period between the end of the 70`s until 1999. A categorization of the publications , according to the issue investigated, the theoretical background used, the research method adopted, the results and conclusions are considered as a starting point in order to present a research profile of the field of study. Next, this profile is discussed and analyzed , pointing out the convergent aspects that characterize the field. Taking this analysis into account, the following thesis (based on Fávero`s proposal, 2000 is defended: in order to generate tools for the teaching practice of Physics through the study of problem solving, a method that substitutes the idea of knowledge transmission in the communication processes that takes place in the classroom should be developed. This method should comprise the idea of interlocution (Vion, 2000 which focuses on social interaction as a means to reveal metacognitive regulations of the subjects, pariticipants in the process, and their development of awareness in relation to a conceptual field (Vergnaud, 1990 – Physics, in this case. The analysis of these processes considers the verbal exchanges among the subjects (Bromberg & Chabrol, 1999 developed in the situation of interaction. This thesis is supported by the articulation of concepts in Psychology, including its interface with linguistics, such as conceptual field, development of awareness and acts of speech, which are reconsidered in this study.

  12. Stress analysis of primary pipe rigid support of the in pile loop

    International Nuclear Information System (INIS)

    Hasibuan, Dj.

    1998-01-01

    Base on requirement of the safety analysis report and operation planning preparation on the in pile loop by using the fuel bundle in the test section, the stress analysis of primary pipe support has been done. The analysis was performed for the 3 (three) points of pipe support, which are chosen by random selection, i.e.: GU 2001, GU 2002, and GU 2331. The analysis result showed that the maximum allowable stress was greater then the actual stress. It is concluded that the existing supports fulfil the safety requirement

  13. Seismic analysis of piping systems subjected to multiple support excitations

    International Nuclear Information System (INIS)

    Sundararajan, C.; Vaish, A.K.; Slagis, G.C.

    1981-01-01

    The paper presents the results of a comparative study between the multiple response spectrum method and the time-history method for the seismic analysis of nuclear piping systems subjected to different excitation at different supports or support groups. First, the necessary equations for the above analysis procedures are derived. Then, three actual nuclear piping systems subjected to single and multiple excitations are analyzed by the different methods, and extensive comparisons of the results (stresses) are made. Based on the results, it is concluded that the multiple response spectrum analysis gives acceptable results as compared to the ''exact'', but much more costly, time-history analysis. 6 refs

  14. AI User Support System for SAP ERP

    Science.gov (United States)

    Vlasov, Vladimir; Chebotareva, Victoria; Rakhimov, Marat; Kruglikov, Sergey

    2017-10-01

    An intelligent system for SAP ERP user support is proposed in this paper. It enables automatic replies on users’ requests for support, saving time for problem analysis and resolution and improving responsiveness for end users. The system is based on an ensemble of machine learning algorithms of multiclass text classification, providing efficient question understanding, and a special framework for evidence retrieval, providing the best answer derivation.

  15. 75 FR 53968 - Reverb Communications, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2010-09-02

    ... final the agreement's proposed order. This matter involves the public relations, marketing, and sales... FEDERAL TRADE COMMISSION [File No. 092 3199] Reverb Communications, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade Commission. ACTION: Proposed Consent Agreement...

  16. Response spectrum analysis for multi-supported subsystems

    International Nuclear Information System (INIS)

    Reed, J.W.

    1983-01-01

    A methodology was developed to analyze multi-supported subsystems (e.g., piping systems) for seismic or other dynamic forces using response spectrum input. Currently, subsystems which are supported at more than one location in a nuclear power plant building are analyzed either by the time-history method or by response spectrum procedures, where spectra which envelop all support locations are used. The former procedure is exceedingly expensive, while the latter procedure is inexpensive but very conservative. Improved analysis procedures are currently being developed which are either coupled- or uncoupled-system approaches. For the coupled-system approach, response feedback between the subsystem and building system is included. For the uncoupled-system approach, feedback is neglected; however, either time history or response spectrum methods can be used. The methodology developed for analyzing multi-supported subsystems is based on the assumption that the building response and the subsystem response are uncoupled. This is the same assumption implicitly made by analysts who design singly-supported subsystems using floor response spectrum input. This approach implies that there is no response feedback between the primary building system and the subsystem, which is generally found to be conservative. The methodology developed for multi-supported subsystems makes this same assumption and thus should produce results with the same ease and degree of accuracy as results obtained for singly-supported subsystems. (orig./HP)

  17. A hybrid sales forecasting scheme by combining independent component analysis with K-means clustering and support vector regression.

    Science.gov (United States)

    Lu, Chi-Jie; Chang, Chi-Chang

    2014-01-01

    Sales forecasting plays an important role in operating a business since it can be used to determine the required inventory level to meet consumer demand and avoid the problem of under/overstocking. Improving the accuracy of sales forecasting has become an important issue of operating a business. This study proposes a hybrid sales forecasting scheme by combining independent component analysis (ICA) with K-means clustering and support vector regression (SVR). The proposed scheme first uses the ICA to extract hidden information from the observed sales data. The extracted features are then applied to K-means algorithm for clustering the sales data into several disjoined clusters. Finally, the SVR forecasting models are applied to each group to generate final forecasting results. Experimental results from information technology (IT) product agent sales data reveal that the proposed sales forecasting scheme outperforms the three comparison models and hence provides an efficient alternative for sales forecasting.

  18. Strength analysis of PGV-1000M steam generator support

    International Nuclear Information System (INIS)

    Dubik, Ya.R.; Ageev, S.M.; Orynyak, I.V.; Vasilchenko, B.M.

    2017-01-01

    The paper presents the design of PGV-1000M steam generator support. It is shown that the load in the rolling support is distributed extremely unevenly, which is associated with the compliance of the support construction. It is demonstrated that under working loads only several rollers are used, the stresses in which exceed the yield strength. This can be an additional loading factor to be considered in the analysis of welding No. 111 failure.

  19. The correlation of social support with mental health: A meta-analysis.

    Science.gov (United States)

    Harandi, Tayebeh Fasihi; Taghinasab, Maryam Mohammad; Nayeri, Tayebeh Dehghan

    2017-09-01

    Social support is an important factor that can affect mental health. In recent decades, many studies have been done on the impact of social support on mental health. The purpose of the present study is to investigate the effect size of the relationship between social support and mental health in studies in Iran. This meta-analysis was carried out in studies that were performed from 1996 through 2015. Databases included SID and Magiran, the comprehensive portal of human sciences, Noor specialized magazine databases, IRANDOC, Proquest, PubMed, Scopus, ERIC, Iranmedex and Google Scholar. The keywords used to search these websites included "mental health or general health," and "Iran" and "social support." In total, 64 studies had inclusion criteria meta-analysis. In order to collect data used from a meta-analysis worksheet that was made by the researcher and for data analysis software, CMA-2 was used. The mean of effect size of the 64 studies in the fixed-effect model and random-effect model was obtained respectively as 0.356 and 0.330, which indicated the moderate effect size of social support on mental health. The studies did not have publication bias, and enjoyed a heterogeneous effect size. The target population and social support questionnaire were moderator variables, but sex, sampling method, and mental health questionnaire were not moderator variables. Regarding relatively high effect size of the correlation between social support and mental health, it is necessary to predispose higher social support, especially for women, the elderly, patients, workers, and students.

  20. Vertical load analysis of cylindrical ACS support structures

    International Nuclear Information System (INIS)

    Kennedy, J.M.; Belytschko, T.B.

    1984-01-01

    A new concept in LMFBR design ACS (above-core structures) supports which has generated some interest is to use a single large radius cylinder. The advantages of a single cylinder are reduced cost of fabrication, increased lateral stiffness, which enhances seismic resistance, and easier access to the fuel. However, the performance of these support structures when submitted to vertical loads from the core area may be substantially different, for the buckling and postbuckling behavior of a cylinder differs substantially from that of cylindrical beams. In this paper, a comparative analysis of an old prototypical support by 4 columns is compared with a cylindrical support. It is assumed that the single cylinder replaces the 4 columns in the original design. The dimensions of the two designs are compared

  1. Stress analysis of piping systems and piping supports. Documentation

    International Nuclear Information System (INIS)

    Rusitschka, Erwin

    1999-01-01

    The presentation is focused on the Computer Aided Tools and Methods used by Siemens/KWU in the engineering activities for Nuclear Power Plant Design and Service. In the multi-disciplinary environment, KWU has developed specific tools to support As-Built Documentation as well as Service Activities. A special application based on Close Range Photogrammetry (PHOCAS) has been developed to support revamp planning even in a high level radiation environment. It comprises three completely inter-compatible expansion modules - Photo Catalog, Photo Database and 3D-Model - to generate objects which offer progressively more utilization and analysis options. To support the outage planning of NPP/CAD-based tools have been developed. The presentation gives also an overview of the broad range of skills and references in: Plant Layout and Design using 3D-CAD-Tools; evaluation of Earthquake Safety (Seismic Screening); Revamps in Existing Plants; Inter-disciplinary coordination of project engineering and execution fields; Consulting and Assistance; Conceptual Studies; Stress Analysis of Piping Systems and Piping Supports; Documentation; Training and Supports in CAD-Design, etc. All activities are performed to the greatest extent possible using proven data-processing tools. (author)

  2. A proposal for improving data center management through strategic implementation of Server virtualization technology to support Malaysian Nuclear Agency's activities

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Raja Murzaferi Raja Moktar; Saaidi Ismail

    2010-01-01

    Management of servers in Nuclear Malaysia's data center poses a big challenge to IT Center as well as to the general management. Traditional server management techniques have been used to provide reliable and continuous support for the ever increasing services and applications demanded by researchers and the other staffs of Nuclear Malaysia. Data centers are cost centers which need logistical support such as electricity, air conditioning, room space, manpower and other resources. To save cost and comply with Green Technology while maintaining or improving the level of services, a new concept called server virtualization is proposed and a feasibility study of this technology has been initiated to explore its potential to accommodate IT centers ever demanding services while reducing the need for such logistical supports, hence adhering to the Green IT concept. Server virtualization is a new technology where a single high performance physical server can host multiple high processing services, and different types operating systems with different hardware and software requirements which are traditionally performed by multiple server machines. This paper briefly explains server virtualization concepts, tools and techniques and proposes an implementation strategy of the technology for Nuclear Malaysia's data center. (author)

  3. Power Load Event Detection and Classification Based on Edge Symbol Analysis and Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Lei Jiang

    2012-01-01

    Full Text Available Energy signature analysis of power appliance is the core of nonintrusive load monitoring (NILM where the detailed data of the appliances used in houses are obtained by analyzing changes in the voltage and current. This paper focuses on developing an automatic power load event detection and appliance classification based on machine learning. In power load event detection, the paper presents a new transient detection algorithm. By turn-on and turn-off transient waveforms analysis, it can accurately detect the edge point when a device is switched on or switched off. The proposed load classification technique can identify different power appliances with improved recognition accuracy and computational speed. The load classification method is composed of two processes including frequency feature analysis and support vector machine. The experimental results indicated that the incorporation of the new edge detection and turn-on and turn-off transient signature analysis into NILM revealed more information than traditional NILM methods. The load classification method has achieved more than ninety percent recognition rate.

  4. The stress analysis evaluation and pipe support layout for pressurizer discharge system

    International Nuclear Information System (INIS)

    Mao Qing; Wang Wei; Zhang Yixiong

    2000-01-01

    The author presents the stress analysis and evaluation of pipe layout and support adjustment process for Qinshan phase II pressurizer discharge system. Using PDL-SYSPIPE INTERFACE software, the characteristic parameters of the system are gained from 3-D CAD engineering design software PDL and outputted as the input date file format of special pipe stress analysis program SYSPIPE. Based on that, SYSPIPE program fast stress analysis function is applied in adjusting pipe layout , support layout and support types. According to RCC-M standard, the pipe stress analysis and evaluation under deadweight, internal pressure, thermal expansion, seismic, pipe rupture and discharge loads are fulfilled

  5. Describing qualitative research undertaken with randomised controlled trials in grant proposals: a documentary analysis

    Science.gov (United States)

    2014-01-01

    Background There is growing recognition of the value of conducting qualitative research with trials in health research. It is timely to reflect on how this qualitative research is presented in grant proposals to identify lessons for researchers and research commissioners. As part of a larger study focusing on how to maximise the value of undertaking qualitative research with trials, we undertook a documentary analysis of proposals of funded studies. Methods Using the metaRegister of Controlled Trials (mRCT) database we identified trials funded in the United Kingdom, ongoing between 2001 and 2010, and reporting the use of qualitative research. We requested copies of proposals from lead researchers. We extracted data from the proposals using closed and open questions, analysed using descriptive statistics and content analysis respectively. Results 2% (89/3812) of trials in the mRCT database described the use of qualitative research undertaken with the trial. From these 89 trials, we received copies of 36 full proposals, of which 32 met our inclusion criteria. 25% used less than a single paragraph to describe the qualitative research. The aims of the qualitative research described in these proposals focused mainly on the intervention or trial conduct. Just over half (56%) of the proposals included an explicit rationale for conducting the qualitative research with the trial, the most frequent being to optimise implementation into clinical practice or to interpret trial findings. Key information about methods, expertise and resources was missing in a large minority of proposals, in particular sample size, type of analysis, and non-personnel resources. 28% specifically stated that qualitative researchers would conduct the qualitative research. Conclusions Our review of proposals of successfully funded studies identified good practice but also identified limited space given to describing the qualitative research, with an associated lack of attention to the rationale for

  6. Analysis of suffering at work in Family Health Support Centers.

    Science.gov (United States)

    Nascimento, Débora Dupas Gonçalves do; Oliveira, Maria Amélia de Campos

    2016-01-01

    Analyzing the work process in the Family Health Support Center. An exploratory, descriptive case study using a qualitative approach. Focus groups were conducted with 20 workers of a Family Health Support Center, and the empirical material was subjected to content analysis technique and analyzed in light of Work Psychodynamics. The category of suffering is presented herein as arising from the dialectical contradiction between actual work and prescribed work, from resistance to the Family Health Support Center's proposal and a lack of understanding of their role; due to an immediatist and curative culture of the users and the Family Health Strategy; of the profile, overload and identification with work. The dialectical contradiction between expectations from Family Health Strategy teams and the work in the Family Health Support Center compromises its execution and creates suffering for workers. Analisar o processo de trabalho no Núcleo de Apoio à Saúde da Família. Estudo de caso exploratório, descritivo e de abordagem qualitativa. Grupos focais foram realizados com 20 trabalhadores do Núcleo de Apoio à Saúde da Família, o material empírico foi submetido à técnica de análise de conteúdo e analisado à luz da Psicodinâmica do Trabalho. Apresenta-se aqui a categoria sofrimento que neste estudo decorre da contradição dialética entre o trabalho real e o trabalho prescrito, da resistência à proposta do Núcleo de Apoio à Saúde da Família e da falta de compreensão de seu papel; da cultura imediatista e curativa do usuário e da Estratégia Saúde da Família; do perfil, sobrecarga e identificação com o trabalho. A contradição dialética entre expectativas das equipes da Estratégia Saúde da Família e o trabalho no Núcleo de Apoio à Saúde da Família compromete sua efetivação e gera sofrimento aos trabalhadores.

  7. Successive heterolytic cleavages of H2 achieve N2 splitting on silica-supported tantalum hydrides: A DFT proposed mechanism

    KAUST Repository

    Solá ns, Xavier Luis; Chow, Catherine; Gouré , Eric; Kaya, Yasemin; Basset, Jean-Marie; Taoufik, Mostafa; Quadrelli, Elsje Alessandra; Eisenstein, Odile

    2012-01-01

    DFT(B3PW91) calculations have been carried out to propose a pathway for the N2 cleavage by H2 in the presence of silica-supported tantalum hydride complexes [(≡ SiO)2TaHx] that forms [(≡SiO)2Ta(NH)(NH2)] (Science2007, 317, 1056). The calculations

  8. Proposal of a concept and reliability analysis for a fusion plant magnet protection system

    International Nuclear Information System (INIS)

    Schnauder, H.; Pamfilie, E.

    1993-05-01

    The unavailability for the current switch down in case of a demand in the magnet coils of a fusion demonstration plant must be decreased by a few orders of magnitude as compared to the one of experimental facilities. The safety requirements to prevent initiation of event sequences which might lead to the release of radioactivity and energy by the plant must be fulfilled with the same standards as applied in a normally applicable plant. On the basis of this proven technology a general usable magnet protection system will be proposed, which achieves some considerable improvements in the failure detectability as compared to the conventional protection systems. It will be demonstrated by fault tree analysis that the principal demands on safety can be satisfied by that approach. The improvements are achieved by the use of an additional microprocessor supported system for failure detection without being used for initiation of any safety related actions. An influence on a safety action by the additional system therefore is excluded. (orig.) [de

  9. Nonlinear modal analysis in NPP dynamics: a proposal

    International Nuclear Information System (INIS)

    Suarez Antola, R.

    2005-07-01

    We propose and briefly suggest how to apply the analytical tools of nonlinear modal analysis (NMA) to problems of nuclear reactor kinetics, NPP dynamics, and NPP instrumentation and control. The proposed method is closely related with recent approaches by modal analysis using the reactivity matrix with feedbacks to couple neutron kinetics with thermal hydraulics in the reactors core. A nonlinear system of ordinary differential equations for mode amplitudes is obtained, projecting the dynamic equations of a model of NPP onto the eigenfunctions of a suitable adjoint operator. A steady state solution of the equations is taken as a reference, and the behaviour of transient solutions in some neighbourhood of the steady state solution is studied by an extension of Liapunov's First Method that enables to cope directly with the non-linear terms in the dynamics. In NPP dynamics these differential equations for the mode amplitudes are of polynomial type of low degree A few dominant modes can usually be identified. These mode amplitudes evolve almost independently of the other modes, more slowly and tending to slave the other mode amplitudes. Using asymptotic methods, it is possible to calculate a closed form analytical approximation to the response to finite amplitude perturbations from the given steady spatial pattern (the origin of the space of mode amplitudes).When there is finite amplitude instability, the method allows us to calculate the threshold amplitude as a well defined function of system's parameters. This is a most significant accomplishment that the other methods cannot afford

  10. The correlation of social support with mental health: A meta-analysis

    Science.gov (United States)

    Harandi, Tayebeh Fasihi; Taghinasab, Maryam Mohammad; Nayeri, Tayebeh Dehghan

    2017-01-01

    Background and aim Social support is an important factor that can affect mental health. In recent decades, many studies have been done on the impact of social support on mental health. The purpose of the present study is to investigate the effect size of the relationship between social support and mental health in studies in Iran. Methods This meta-analysis was carried out in studies that were performed from 1996 through 2015. Databases included SID and Magiran, the comprehensive portal of human sciences, Noor specialized magazine databases, IRANDOC, Proquest, PubMed, Scopus, ERIC, Iranmedex and Google Scholar. The keywords used to search these websites included “mental health or general health,” and “Iran” and “social support.” In total, 64 studies had inclusion criteria meta-analysis. In order to collect data used from a meta-analysis worksheet that was made by the researcher and for data analysis software, CMA-2 was used. Results The mean of effect size of the 64 studies in the fixed-effect model and random-effect model was obtained respectively as 0.356 and 0.330, which indicated the moderate effect size of social support on mental health. The studies did not have publication bias, and enjoyed a heterogeneous effect size. The target population and social support questionnaire were moderator variables, but sex, sampling method, and mental health questionnaire were not moderator variables. Conclusion Regarding relatively high effect size of the correlation between social support and mental health, it is necessary to predispose higher social support, especially for women, the elderly, patients, workers, and students. PMID:29038699

  11. Deliverable D74.2. Probabilistic analysis methods for support structures

    DEFF Research Database (Denmark)

    Gintautas, Tomas

    2018-01-01

    Relevant Description: Report describing the probabilistic analysis for offshore substructures and results attained. This includes comparison with experimental data and with conventional design. Specific targets: 1) Estimate current reliability level of support structures 2) Development of basis...... for probabilistic calculations and evaluation of reliability for offshore support structures (substructures) 3) Development of a probabilistic model for stiffness and strength of soil parameters and for modeling geotechnical load bearing capacity 4) Comparison between probabilistic analysis and deterministic...

  12. Analyzing and modeling interdisciplinary product development a framework for the analysis of knowledge characteristics and design support

    CERN Document Server

    Neumann, Frank

    2015-01-01

    Frank Neumann focuses on establishing a theoretical basis that allows a description of the interplay between individual and collective processes in product development. For this purpose, he introduces the integrated descriptive model of knowledge creation as the first constituent of his research framework. As a second part of the research framework, an analysis and modeling method is proposed that captures the various knowledge conversion activities described by the integrated descriptive model of knowledge creation. Subsequently, this research framework is applied to the analysis of knowledge characteristics of mechatronic product development (MPD). Finally, the results gained from the previous steps are used within a design support system that aims at federating the information and knowledge resources contained in the models published in the various development activities of MPD. Contents Descriptive Model of Knowledge Creation in Interdisciplinary Product Development Research Framework for the Analysis of ...

  13. Solutions for decision support in university management

    Directory of Open Access Journals (Sweden)

    Andrei STANCIU

    2009-06-01

    Full Text Available The paper proposes an overview of decision support systems in order to define the role of a system to assist decision in university management. The authors present new technologies and the basic concepts of multidimensional data analysis using models of business processes within the universities. Based on information provided by scientific literature and on the authors’ experience, the study aims to define selection criteria in choosing a development environment for designing a support system dedicated to university management. The contributions consist in designing a data warehouse model and models of OLAP analysis to assist decision in university management.

  14. A New Application of Support Vector Machine Method: Condition Monitoring and Analysis of Reactor Coolant Pump

    International Nuclear Information System (INIS)

    Meng Qinghu; Meng Qingfeng; Feng Wuwei

    2012-01-01

    Fukushima nuclear power plant accident caused huge losses and pollution and it showed that the reactor coolant pump is very important in a nuclear power plant. Therefore, to keep the safety and reliability, the condition of the coolant pump needs to be online condition monitored and fault analyzed. In this paper, condition monitoring and analysis based on support vector machine (SVM) is proposed. This method is just to aim at the small sample studies such as reactor coolant pump. Both experiment data and field data are analyzed. In order to eliminate the noise and useless frequency, these data are disposed through a multi-band FIR filter. After that, a fault feature selection method based on principal component analysis is proposed. The related variable quantity is changed into unrelated variable quantity, and the dimension is descended. Then the SVM method is used to separate different fault characteristics. Firstly, this method is used as a two-kind classifier to separate each two different running conditions. Then the SVM is used as a multiple classifier to separate all of the different condition types. The SVM could separate these conditions successfully. After that, software based on SVM was designed for reactor coolant pump condition analysis. This software is installed on the reactor plant control system of Qinshan nuclear power plant in China. It could monitor the online data and find the pump mechanical fault automatically.

  15. Supplement analysis of transuranic waste characterization and repackaging activities at the Idaho National Engineering Laboratory in support of the Waste Isolation Pilot Plant test program

    International Nuclear Information System (INIS)

    1991-03-01

    This supplement analysis has been prepared to describe new information relevant to waste retrieval, handling, and characterization at the Idaho National Engineering Laboratory (INEL) and to evaluate the need for additional documentation to satisfy the National Environmental Policy Act (NEPA). The INEL proposes to characterize and repackage contact-handled transuranic waste to support the Waste Isolation Pilot Plant (WIPP) Test Phase. Waste retrieval, handling and processing activities in support of test phase activities at the WIPP were addressed in the Supplemental Environmental Impact Statement (SEIS) for the WIPP. To ensure that test-phase wastes are properly characterized and packaged, waste containers would be retrieved, nondestructively examined, and transported from the Radioactive Waste Management Complex (RWMC) to the Hot-Fuel Examination Facility for headspace gas analysis, visual inspections to verify content code, and waste acceptance criteria compliance, then repackaging into WIPP experimental test bins or returned to drums. Following repackaging the characterized wastes would be returned to the RWMC. Waste characterization would help DOE determine WIPP compliance with US Environmental Protection Agency regulations governing disposal of transuranic waste and hazardous waste. Additionally, this program supports onsite compliance with Resource Conservation and Recovery Act (RCRA) requirements, compliance with the terms of the No-Migration Variance at WIPP, and provides data to support future waste shipments to WIPP. This analysis will help DOE determine whether there have been substantial changes made to the proposed action at the INEL, or if preparation of a supplement to the WIPP Final Environmental Impact Statement (DOE, 1980) and SEIS (DOE, 1990a) is required. This analysis is based on current information and includes details not available to the SEIS

  16. Engineering evaluation/cost analysis for the proposed management of contaminated water impounded at the Weldon Spring chemical plant area

    International Nuclear Information System (INIS)

    MacDonell, M.M.; Maxey, M.L.; Peterson, J.M.; Joya, I.E.

    1990-07-01

    This engineering evaluation/cost analysis (EE/CA) report has been prepared to support the proposed removal action for managing contaminated surface waters impounded at the chemical plant area of the Weldon Spring site, located near Weldon Spring, Missouri. The US Department of Energy is responsible for cleanup activities at the site under its Surplus Facilities Management Program (SFMP). The major goals of SFMP are to eliminate potential hazards to human health and the environment that are associated with contamination at SFMP sites and to make surplus real property available for other uses, to the extent possible. The objectives of this EE/CA report are to identify the cleanup as a removal action, document the selection of a response that will mitigate the potential release of radioactive or chemical contaminants from the impounded waters into the nearby environment, and address environmental impacts associated with the proposed action. 41 refs., 8 figs., 8 tabs

  17. Construction and decomposition of biorthogonal vector-valued wavelets with compact support

    International Nuclear Information System (INIS)

    Chen Qingjiang; Cao Huaixin; Shi Zhi

    2009-01-01

    In this article, we introduce vector-valued multiresolution analysis and the biorthogonal vector-valued wavelets with four-scale. The existence of a class of biorthogonal vector-valued wavelets with compact support associated with a pair of biorthogonal vector-valued scaling functions with compact support is discussed. A method for designing a class of biorthogonal compactly supported vector-valued wavelets with four-scale is proposed by virtue of multiresolution analysis and matrix theory. The biorthogonality properties concerning vector-valued wavelet packets are characterized with the aid of time-frequency analysis method and operator theory. Three biorthogonality formulas regarding them are presented.

  18. Considerations in the development of EPA's proposed BRC criteria

    International Nuclear Information System (INIS)

    Holcomb, W.F.; Gruhlke, J.M.; Galpin, F.L.

    1988-01-01

    To support the concept of criteria for potential below-regulatory-concern (BRC) wastes the US Environmental Protection Agency (EPA) has developed technical information, cost data, a methodology for analyzing promising candidate waste streams, and a rationale for proposing the criteria. Risk assessments to support the BRC criteria include an analysis of surrogate radioactive waste streams, disposal alternatives, and diverse demographic settings. In arriving at a proposed BRC level, EPA carefully weighed and considered many factors. Foremost was protection of the public and the development of an exposure level with assurance of no undue risk. Also considered were other daily risks encountered, ability to demonstrate compliance, guidance for similar exemptions by other groups, consistency with other regulated risk levels, general population health risks, maximum annual exposures to critical population groups, and the costs presently associated with the regulation of these wastes

  19. Families affected by childhood cancer: an analysis of the provision of social support within online support groups.

    Science.gov (United States)

    Coulson, N S; Greenwood, N

    2012-11-01

    With increasing access to the Internet, there are new opportunities available to families to seek information, advice and support about childhood cancer online. A total of 487 messages were retrieved from three childhood cancer online support groups and were analysed using deductive thematic analysis for the presence of support-intended communication using Cutrona and Suhr's social support typology. In addition, the messages were examined for negative experiences or disadvantages. The results revealed the presence of five types of social support: emotional, informational, esteem support and tangible assistance. In addition, some potential limitations of online support were identified, including a lack of responses and difficulties in maintaining relationships outside the online group context. This study suggests that online support groups may offer the potential to support family members of children with cancer. In particular, it may be a useful resource for those seeking emotional and information support. However, there may be limitations associated with the use of online support groups. © 2011 Blackwell Publishing Ltd.

  20. Engineering evaluation/cost analysis for the proposed management of contaminated water in the Weldon Spring quarry

    International Nuclear Information System (INIS)

    MacDonell, M.M.; Peterson, J.M.; Joya, I.E.

    1989-01-01

    This engineering evaluation/cost analysis (EE/CA) report has been prepared to support the proposed removal action for management of contaminated water in the Weldon Spring quarry, located near Weldon Spring, Missouri. The water became chemically and radioactively contaminated as a result of contact with various wastes that were disposed of in the quarry between 1942 and 1968. The US Department of Energy is responsible for cleanup activities at the Weldon Spring site, which includes the quarry, under its Surplus Facilities Management Program (SFMP). The major goals of SFMP are to eliminate potential hazards to the public and the environment that are associated with contamination at SFMP sites and to make surplus real property available for other uses, to the extent possible. The objectives of the EE/CA report are to identify the cleanup as a removal action, to document the selection of response activities that will mitigate the potential for release of radioactive or chemical contaminant for the quarry water into the nearby environment, and to address environmental impacts associated with the proposed action. Pursuant to the evaluation alternatives in this report, it is proposed that the water be pumped from the quarry pond to a newly constructed treatment plant for removal of the contaminants of concern. This removal action is necessary for and consistent with the overall response action being planned to minimize potential threats to the public and the environment associated with the current contamination at the quarry. 66 refs., 15 figs., 32 tabs

  1. Support for Synchrotron Access by Environmental Scientists

    International Nuclear Information System (INIS)

    Daly, Michael; Madden, Andrew; Palumbo, Anthony; Qafoku, N.

    2006-01-01

    To support ERSP-funded scientists in all aspects of synchrotron-based research at the Advanced Photon Source (APS). This support comes in one or more of the following forms: (1) writing proposals to the APS General User (GU) program, (2) providing time at MRCAT/EnviroCAT beamlines via the membership of the Molecular Environmental Science (MES) Group in MRCAT/EnviroCAT, (3) assistance in experimental design and sample preparation, (4) support at the beamline during the synchrotron experiment, (5) analysis and interpretation of the synchrotron data, and (6) integration of synchrotron experimental results into manuscripts

  2. Exergy analysis for a proposed binary geothermal power plant in Nisyros Island, Greece

    DEFF Research Database (Denmark)

    Koroneos, Christopher; Polyzakis, A.; Xydis, George

    2017-01-01

    and a measure of the quality of the different forms of energy in relation to given environmental conditions. In this paper, data from an experimental geothermal drill in the Greek Island of Nisyros, located in the south of the Aegean Sea, have been used in order to estimate the maximum available work...... resulted supporting technical feasibility of the proposed geothermal plant....

  3. Structural assessments of plate type support system for APR1400 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Anh Tung; Namgung, Ihn, E-mail: inamgung@kings.ac.kr

    2017-04-01

    Highlights: • This paper investigates plate-type support structure for the reactor vessel of the APR 1400. • The tall column supports of APR1400 reactor challenges in seismic and severe accident events. • A plate-type support of reactor vessel was proposed and evaluated based on ASME code. • The plate-type support was assessed to show its higher rigidity than column-type. - Abstract: This paper investigates an alternative form of support structure for the reactor vessel of the APR 1400. The current reactor vessel adopts a four-column support arrangement locating on the cold legs of the vessel. Although having been successfully designed, the tall column structure challenges in seismic events. In addition, for the mitigation of severe accident consequences, the columns inhibit ex-vessel coolant flow, hence the elimination of the support columns proposes extra safety advantages. A plate-type support was proposed and evaluated for the adequacy of meeting the structural stiffness by Finite Element Analysis (FEA) approach. ASME Boiler and Pressure Vessel Code was used to verify the design. The results, which cover thermal and static structural analysis, show stresses are within allowable limits in accordance with the design code. Even the heat conduction area is increased for the plate-type of support system, the results showed that the thermal stresses are within allowable limits. A comparison of natural frequencies and mode shapes for column support and plate-type support were presented as well which showed higher fundamental frequencies for the plate-type support system resulting in greater rigidity of the support system. From the outcome of this research, the plate-type support is proven to be an alternative to current APR column type support design.

  4. Positive Behavior Support and Applied Behavior Analysis

    Science.gov (United States)

    Johnston, J. M.; Foxx, R. M.; Jacobson, J. W.; Green, G.; Mulick, J. A.

    2006-01-01

    This article reviews the origins and characteristics of the positive behavior support (PBS) movement and examines those features in the context of the field of applied behavior analysis (ABA). We raise a number of concerns about PBS as an approach to delivery of behavioral services and its impact on how ABA is viewed by those in human services. We…

  5. Uncertainty and sensitivity analysis in the 2008 performance assessment for the proposed repository for high-level radioactive waste at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Helton, Jon Craig; Sallaberry, Cedric M.; Hansen, Clifford W.

    2010-01-01

    Extensive work has been carried out by the U.S. Department of Energy (DOE) in the development of a proposed geologic repository at Yucca Mountain (YM), Nevada, for the disposal of high-level radioactive waste. As part of this development, an extensive performance assessment (PA) for the YM repository was completed in 2008 (1) and supported a license application by the DOE to the U.S. Nuclear Regulatory Commission (NRC) for the construction of the YM repository (2). This presentation provides an overview of the conceptual and computational structure of the indicated PA (hereafter referred to as the 2008 YM PA) and the roles that uncertainty analysis and sensitivity analysis play in this structure.

  6. Fretting-wear damage of heat exchanger tubes: a proposed damage criterion based on tube vibration response

    International Nuclear Information System (INIS)

    Yetisir, M.; McKerrow, E.; Pettigrew, M.J.

    1997-01-01

    A simple criterion is proposed to estimate fretting-wear damage in heat exchanger tubes with clearance supports. The criterion is based on parameters such as vibration frequency, mid-span vibration amplitude, span length, tube mass and an empirical wear coefficient. It is generally accepted that fretting-wear damage is proportional to a parameter called work-rate. Work-rate is a measure of the dynamic interaction between a vibrating tube and its supports. Due to the complexity of the impact-sliding behavior at the clearance-supports, work-rate calculations for heat exchanger tubes require specialized non-linear finite element codes. These codes include contact models for various clearance-support geometries. Such non-linear finite element analyses are complex, expensive and time consuming. The proposed criterion uses the results of linear vibration analysis (i.e., vibration frequency and mid-span vibration amplitude due to turbulence) and does not require a non-linear analysis. It can be used by non-specialists for a quick evaluation of the expected work-rate, and hence, the fretting-wear damage of heat exchanger tubes. The proposed criterion was obtained from an extensive parametric study that was conducted using a non-linear finite element program. It is shown that, by using the proposed work-rate criteria, work-rate can be estimated within a factor of two. This result, however, requires further testing with more complicated flow patterns. (author)

  7. Analysis of Potential Energy Corridors Proposed by the Western Electricity Coordinating Council

    Energy Technology Data Exchange (ETDEWEB)

    Kuiper, James A.; Cantwell, Brian J.; Hlava, Kevin J.; Moore, H Robert; Orr, Andrew B.; Zvolanek, Emily A.

    2014-02-24

    This report, Analysis of Potential Energy Corridors Proposed by the Western Electricity Coordinating Council (WECC), was prepared by the Environmental Science Division of Argonne National Laboratory (Argonne). The intent of WECC’s work was to identify planning-level energy corridors that the Department of Energy (DOE) and its affiliates could study in greater detail. Argonne was tasked by DOE to analyze the WECC Proposed Energy Corridors in five topic areas for use in reviewing and revising existing corridors, as well as designating additional energy corridors in the 11 western states. In compliance with Section 368 of the Energy Policy Act of 2005 (EPAct), the Secretaries of Energy, Agriculture, and the Interior (Secretaries) published a Programmatic Environmental Impact Statement in 2008 to address the proposed designation of energy transport corridors on federal lands in the 11 western states. Subsequently, Records of Decision designating the corridors were issued in 2009 by the Bureau of Land Management (BLM) and the U.S. Forest Service (USFS). The 2012 settlement of a lawsuit, brought by The Wilderness Society and others against the United States, which identified environmental concerns for many of the corridors requires, among other things, periodic reviews of the corridors to assess the need for revisions, deletions, or additions. A 2013 Presidential Memorandum requires the Secretaries to undertake a continuing effort to identify and designate energy corridors. The WECC Proposed Energy Corridors and their analyses in this report provide key information for reviewing and revising existing corridors, as well as designating additional energy corridors in the 11 western states. Load centers and generation hubs identified in the WECC analysis, particularly as they reflect renewable energy development, would be useful in reviewing and potentially updating the designated Section 368 corridor network. Argonne used Geographic Information System (GIS) technology to

  8. Seismic structural response analysis for multiple support excitation

    International Nuclear Information System (INIS)

    Shaw, D.E.

    1975-01-01

    In the seismic analysis of nuclear power plant equipment such as piping systems situations often arise in which piping systems span between adjacent structures or between different elevations in the same structure. Owing to the differences in the seismic time history response of different structures or different elevations of the same structure, the input support motion will differ for different supports. The concept of a frequency dependent participation factor and rotational response spectra accounting for phase differences between support excitations is developed by using classical equations of motion to formulate the seismic response of a structure subjected to multiple support excitation. The essence of the method lies in describing the seismic excitation of a multiply excited structure in terms of translational and rotational spectra used at every support and a frequency dependent spatial distribution function derived from the phase relationships of the different support time histories. In this manner it is shown that frequency dependent participation factors can be derived from the frequency dependent distribution functions. Examples are shown and discussed relative to closed form solutions and the state-of-the-art techniques presently being used for the solution of problems of multiply excited structures

  9. Actions to promote professional ethics in the people supported education

    Directory of Open Access Journals (Sweden)

    Sucel Batista-Fonseca

    2016-06-01

    Full Text Available An action plan aimed at strengthening professional ethics supported by the methodology of popular education is a tool for achieving quality in the institutions used by managers and by workers committed with efficiency in our organizations. This study seeks to propose an action plan that promotes ethics in institutions supported by the methodology of popular education. The development of this proposal was made aided by documentary analysis with the use of theoretical methods such as analysis-synthesis, induction, deduction, and leaning on the technique of participant observation. The authors have investigated about professional ethics and Popular Education and analyzed these categories separately. The literature review showed that the methodology of popular education is an essential tool to encourage professional ethics.

  10. A social comparison theory analysis of group composition and efficacy of cancer support group programs.

    Science.gov (United States)

    Carmack Taylor, Cindy L; Kulik, James; Badr, Hoda; Smith, Murray; Basen-Engquist, Karen; Penedo, Frank; Gritz, Ellen R

    2007-07-01

    Group-based psychosocial programs provide an effective forum for improving mood and social support for cancer patients. Because some studies show more benefit for patients with initially high psychosocial distress, and little or no benefit for patients with initially low distress, support programs may better address patient needs by only including distressed patients. However, distressed patients may benefit particularly from the presence of nondistressed patients who model effective coping, an idea many researchers and extensions of social comparison theory support. We present a theoretical analysis, based on a social comparison perspective, of how group composition (heterogeneous group of distressed and nondistressed patients versus homogeneous group of distressed patients) may affect the efficacy of cancer support programs. We propose that a heterogeneous group allows distressed patients maximal opportunity for the various social comparison activities they are likely to prefer; a homogeneous group does not. Though the presence of nondistressed patients in a heterogeneous group potentially benefits distressed patients, the benefits for nondistressed patients are unclear. For nondistressed patients, heterogeneous groups may provide limited opportunities for preferred social comparison activity and may create the possibility for no benefit or even negative effects on quality of life. We also discuss ethical issues with enrolling nondistressed patients whose presence may help others, but whose likelihood of personal benefit is questionable.

  11. Safety analysis in support of regulatory decision marking

    International Nuclear Information System (INIS)

    Pomier Baez, L.; Troncoso Fleitas, M.; Valhuerdi Debesa, C.; Valle Cepero, R.; Hernandez, J.L.

    1996-01-01

    Features of different safety analysis techniques by means of calculation thermohydraulic a probabilistic and severe accidents used in the safety assessment, as well as the development of these techniques in Cuba and their use in support of regulatory decision making are presented

  12. Analysis of PROTEUS-experiments performed in support of LWHCR design

    International Nuclear Information System (INIS)

    Boehme, R.

    1992-01-01

    The Phase II series of tight lattice experiments carried out at the PROTEUS reactor facility in Switzerland was concentrated on physics aspects of a Light Water High Conversion Reactor (LWHCR). The dependence of reaction rate ratios and coolant void coefficients on lattice parameters was of main interest. In several cores additional experiments were carried out in support of reactor design. The reactivity worth of absorber materials proposed for reactor control were measured and the distribution of fission rates in the vicinity of core singularities, like water holes and absorber pins, was studied. These experimentals were now analysed with data and methods readily available at KfK. Main tool for these investigations was the two-dimensional transport code TWODANT. The input cross-sections were prepared from data files of the KARBUS system used at KfK for reactor design. The comparison of calculated reactivity changes with experimental data shows agreement of relative absorber worths within about 20 %. The power distribution in the vicinity of singularities can be estimated with ca. 4% accuracy. Studies have indicated that the remaining discrepancies may be partially caused by deficiencies of the transport code used for the analysis. (orig.)

  13. STRUCTURE RATIONALIZATION OF TANK CARS SUPPORT DEVICES FOR FLUIDS

    Directory of Open Access Journals (Sweden)

    M. V. Pavliuchenkov

    2014-01-01

    Full Text Available Purpose. Improvement of fluid tank cars structure due to development of new tank bracket support structures and their materials consumption decrease. Methodology. The investigations to search the optimal design of the support structure were conducted in order to solve such problem. At the first stage patent and bibliographic analysis of technical solutions was done, the advantages and disadvantages were revealed and new design options were proposed, the most efficient design was determined. The next step is objective function making for determining its optimal parameters, imposition of restrictions, acquisition of objective function approximation and restrictions in the form of polynomials. At the third stage numerical implementation of function optimization was proposed, optimal design parameters were determined with graphical method. Results methods have coincided. Findings. The most efficient design of support structure was determined; its optimum geometrical dimensions were described. Originality. The author provides the mathematical formulation of optimal design of tank car supports using the minimum materials consumption criteria. The graphic and numerical methods were used during the investigations. Practical value. The author proposed the finite-element models of tank car with different design execution of bracket support structures, which allow estimating the VAT of structure.

  14. Development of a Reference Image Collection Library for Histopathology Image Processing, Analysis and Decision Support Systems Research.

    Science.gov (United States)

    Kostopoulos, Spiros; Ravazoula, Panagiota; Asvestas, Pantelis; Kalatzis, Ioannis; Xenogiannopoulos, George; Cavouras, Dionisis; Glotsos, Dimitris

    2017-06-01

    Histopathology image processing, analysis and computer-aided diagnosis have been shown as effective assisting tools towards reliable and intra-/inter-observer invariant decisions in traditional pathology. Especially for cancer patients, decisions need to be as accurate as possible in order to increase the probability of optimal treatment planning. In this study, we propose a new image collection library (HICL-Histology Image Collection Library) comprising 3831 histological images of three different diseases, for fostering research in histopathology image processing, analysis and computer-aided diagnosis. Raw data comprised 93, 116 and 55 cases of brain, breast and laryngeal cancer respectively collected from the archives of the University Hospital of Patras, Greece. The 3831 images were generated from the most representative regions of the pathology, specified by an experienced histopathologist. The HICL Image Collection is free for access under an academic license at http://medisp.bme.teiath.gr/hicl/ . Potential exploitations of the proposed library may span over a board spectrum, such as in image processing to improve visualization, in segmentation for nuclei detection, in decision support systems for second opinion consultations, in statistical analysis for investigation of potential correlations between clinical annotations and imaging findings and, generally, in fostering research on histopathology image processing and analysis. To the best of our knowledge, the HICL constitutes the first attempt towards creation of a reference image collection library in the field of traditional histopathology, publicly and freely available to the scientific community.

  15. Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project

    International Nuclear Information System (INIS)

    Roberds, W.J.; Plum, R.J.; Visca, P.J.

    1984-11-01

    This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab

  16. A fractionally cointegrated VAR analysis of economic voting and political support

    DEFF Research Database (Denmark)

    Jones, Maggie E. C.; Ørregård Nielsen, Morten; Popiel, Michael Ksawery

    We use a fractionally cointegrated vector autoregressive model to examine the relationship between Canadian political support and macroeconomic conditions. This model is well suited for the analysis because it allows multiple fractional time series and admits simple asymptotic inference for the m......We use a fractionally cointegrated vector autoregressive model to examine the relationship between Canadian political support and macroeconomic conditions. This model is well suited for the analysis because it allows multiple fractional time series and admits simple asymptotic inference...... for the model parameters and tests of the hypotheses of interest. In the long-run equilibrium, we find that support for the Progressive Conservative Party was higher during periods of high interest rates and low unemployment, while support for the Liberal Party was higher during periods of low interest rates...

  17. Licensing Support System: Preliminary data scope analysis

    International Nuclear Information System (INIS)

    1989-01-01

    The purpose of this analysis is to determine the content and scope of the Licensing Support System (LSS) data base. Both user needs and currently available data bases that, at least in part, address those needs have been analyzed. This analysis, together with the Preliminary Needs Analysis (DOE, 1988d) is a first effort under the LSS Design and Implementation Contract toward developing a sound requirements foundation for subsequent design work. These reports are preliminary. Further refinements must be made before requirements can be specified in sufficient detail to provide a basis for suitably specific system specifications. This document provides a baseline for what is known at this time. Additional analyses, currently being conducted, will provide more precise information on the content and scope of the LSS data base. 23 refs., 4 figs., 8 tabs

  18. Analysis and Assessment of Computer-Supported Collaborative Learning Conversations

    NARCIS (Netherlands)

    Trausan-Matu, Stefan

    2008-01-01

    Trausan-Matu, S. (2008). Analysis and Assessment of Computer-Supported Collaborative Learning Conversations. Workshop presentation at the symposium Learning networks for professional. November, 14, 2008, Heerlen, Nederland: Open Universiteit Nederland.

  19. Design of an operator support system for online maintenance at nuclear power plant

    International Nuclear Information System (INIS)

    Chu Yongyue; Li Huwei; Gao Qiang; Yi Yan; Yang Ming

    2013-01-01

    Online maintenance based on reliability centered management is pivotal for the safe and economical operation of Nuclear Power Plant (NPP). This paper presents an operator support system through which the operators can effectively manage plant configuration and identify the weaknesses in plant operation. The proposed operator support system is based on the GO-FLOW, which is a success-oriented availability analysis methodology and can be used for evaluating phased missions. In this paper, the design of the proposed operator support system is introduced through a case study of the Auxiliary Feed Water System (AFWS). (author)

  20. SPATIAL ANALYSIS TO SUPPORT GEOGRAPHIC TARGETING OF GENOTYPES TO ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    Glenn eHyman

    2013-03-01

    Full Text Available Crop improvement efforts have benefited greatly from advances in available data, computing technology and methods for targeting genotypes to environments. These advances support the analysis of genotype by environment interactions to understand how well a genotype adapts to environmental conditions. This paper reviews the use of spatial analysis to support crop improvement research aimed at matching genotypes to their most appropriate environmental niches. Better data sets are now available on soils, weather and climate, elevation, vegetation, crop distribution and local conditions where genotypes are tested in experimental trial sites. The improved data are now combined with spatial analysis methods to compare environmental conditions across sites, create agro-ecological region maps and assess environment change. Climate, elevation and vegetation data sets are now widely available, supporting analyses that were much more difficult even five or ten years ago. While detailed soil data for many parts of the world remains difficult to acquire for crop improvement studies, new advances in digital soil mapping are likely to improve our capacity. Site analysis and matching and regional targeting methods have advanced in parallel to data and technology improvements. All these developments have increased our capacity to link genotype to phenotype and point to a vast potential to improve crop adaptation efforts.

  1. EMergy analysis perspectives of Thailand and Mekong River dam proposals

    International Nuclear Information System (INIS)

    Brown, M.T.; McClanahan, T.R.

    1996-01-01

    Methods of EMergy analysis (a scientifically based measure of wealth with units of solar emjoules (sej)) are explained and illustrated, using the economy of Thailand and two proposed dams on the Mekong River. Thailand's EMergy/$ ratio is near the world average (3.46 ·10 12 sej/$), its EMergy per capita ratio (2.98·10 15 sej/capita) is low compared to developed economies (that of the United States is 29.3·10 15 sej/capita), and its EMergy balance of payments is negative (the EMergy in exports is almost twice the EMergy in imports). The calculated net yield ratios of the proposed dams were sensitive to the treatment of sediments. The analysis yielded high net yield ratios (12.3/1 and 20.3/1) if sediments were not included, but yielded ratios of only 1.4/1 and 1.3/1 if sediments were included. If the two dams were constructed as a cascade, the combined net yield ratio was 2.5/1 (sediments included). If compared to conventional fossil fuels as a primary source of energy to the economy, the net yield ratio of the electricity generated from the two-dam cascade expressed as fossil fuels was 7.4/1

  2. Nutritional support in chronic obstructive pulmonary disease: a systematic review and meta-analysis.

    Science.gov (United States)

    Collins, Peter F; Stratton, Rebecca J; Elia, Marinos

    2012-06-01

    The efficacy of nutritional support in the management of malnutrition in chronic obstructive pulmonary disease (COPD) is controversial. Previous meta-analyses, based on only cross-sectional analysis at the end of intervention trials, found no evidence of improved outcomes. The objective was to conduct a meta-analysis of randomized controlled trials (RCTs) to clarify the efficacy of nutritional support in improving intake, anthropometric measures, and grip strength in stable COPD. Literature databases were searched to identify RCTs comparing nutritional support with controls in stable COPD. Thirteen RCTs (n = 439) of nutritional support [dietary advice (1 RCT), oral nutritional supplements (ONS; 11 RCTs), and enteral tube feeding (1 RCT)] with a control comparison were identified. An analysis of the changes induced by nutritional support and those obtained only at the end of the intervention showed significantly greater increases in mean total protein and energy intakes with nutritional support of 14.8 g and 236 kcal daily. Meta-analyses also showed greater mean (±SE) improvements in favor of nutritional support for body weight (1.94 ± 0.26 kg, P groups. This systematic review and meta-analysis showed that nutritional support, mainly in the form of ONS, improves total intake, anthropometric measures, and grip strength in COPD. These results contrast with the results of previous analyses that were based on only cross-sectional measures at the end of intervention trials.

  3. 78 FR 31568 - Proposed Collection; 60-day Comment Request: Autism Spectrum Disorder Research Portfolio Analysis

    Science.gov (United States)

    2013-05-24

    ... Comment Request: Autism Spectrum Disorder Research Portfolio Analysis SUMMARY: In compliance with the.... Proposed Collection: Autism Spectrum Disorder (ASD) Research Portfolio Analysis, 0925--NEW--National... Collection: The purpose of the ASD portfolio analysis is to collect research funding data from U.S. and...

  4. A genre analysis of English language research grant proposal abstracts in Chile

    OpenAIRE

    Matzler, Pascal P

    2014-01-01

    The writing of English-language research genres represent a challenging task for non-native-speaker researchers. Grant proposals, in particular, are a high-stakes genre that will greatly influence a researcher’s career development opportunities; however, novice researchers are faced with an urgent lack of publicly available exemplars or teaching materials for this genre. The present study attempts to address this issue by means of Swalesian genre analysis. First, a move system analysis is app...

  5. Draft regulatory analysis: notice of proposed rulemaking motor gasoline allocation revisions

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    The Draft Regulatory Analysis is prepared for those proposed regulations which either may have a major impact on the general economy, individual industries, or geographic regions and levels of government, or may be significant in that they affect important DOE policy concerns and are the object of public interest. The problems and proposed solutions for the Notice of Proposed Rulemaking and Public Hearings on the Motor Gasoline Allocation Program are examined. The ERA's mandate for this program is set out in the Emergency Petroleum Allocation Act of 1973. Under this Act, the President is empowered to enforce, at his discretion, price and allocation controls on petroleum and petroleum products, including gasoline, through September 30, 1981. The Act sets the following allocation goals: protect public health; maintain public services and agricultural operations; foster competition in the petroleum industry; distribute petroleum among industry sectors and US regions equitably; and minimize economic disruption and unnecessary interference wth market mechanisms.

  6. SEDIMENT ANALYSIS NETWORK FOR DECISION SUPPORT (SANDS) LANDSAT GEOLOGICAL SURVEY OF AL (GSA) ANALYSIS V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Sediment Analysis Network for Decision Support (SANDS) Landsat Geological Survey of AL (GSA) Analysis dataset analyzed changes in the coastal shoreline and...

  7. Physical activity and social support in adolescents: analysis of different types and sources of social support.

    Science.gov (United States)

    Mendonça, Gerfeson; Júnior, José Cazuza de Farias

    2015-01-01

    Little is known about the influence of different types and sources of social support on physical activity in adolescents. The aim of this study was to analyse the association between physical activity and different types and sources of social support in adolescents. The sample consisted of 2,859 adolescents between 14-19 years of age in the city of João Pessoa, in Northeastern Brazil. Physical activity was measured with a questionnaire and social support from parents and friends using a 10-item scale five for each group (type of support: encouragement, joint participation, watching, inviting, positive comments and transportation). Multivariable analysis showed that the types of support provided by parents associated with physical activity in adolescents were encouragement for females (P genders (males: P = 0.009; females: P physical activity varies according to its source, as well as the gender and age of the adolescents.

  8. Strategic Analysis of Family Support in EHDI Systems

    Science.gov (United States)

    Bradham, Tamala S.; Houston, K. Todd; Guignard, Gayla Hutsell; Hoffman, Jeff

    2011-01-01

    State coordinators of early hearing detection and intervention (EHDI) programs completed a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that examined 12 areas within state EHDI programs. For the family support area, 47 EHDI coordinators listed 255 items, and themes were identified within each category. A threats,…

  9. Life support technology investment strategies for flight programs: An application of decision analysis

    Science.gov (United States)

    Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

    1993-01-01

    Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

  10. Support surfaces for pressure ulcer prevention: A network meta-analysis

    Science.gov (United States)

    Dumville, Jo C.; Cullum, Nicky

    2018-01-01

    Background Pressure ulcers are a prevalent and global issue and support surfaces are widely used for preventing ulceration. However, the diversity of available support surfaces and the lack of direct comparisons in RCTs make decision-making difficult. Objectives To determine, using network meta-analysis, the relative effects of different support surfaces in reducing pressure ulcer incidence and comfort and to rank these support surfaces in order of their effectiveness. Methods We conducted a systematic review, using a literature search up to November 2016, to identify randomised trials comparing support surfaces for pressure ulcer prevention. Two reviewers independently performed study selection, risk of bias assessment and data extraction. We grouped the support surfaces according to their characteristics and formed evidence networks using these groups. We used network meta-analysis to estimate the relative effects and effectiveness ranking of the groups for the outcomes of pressure ulcer incidence and participant comfort. GRADE was used to assess the certainty of evidence. Main results We included 65 studies in the review. The network for assessing pressure ulcer incidence comprised evidence of low or very low certainty for most network contrasts. There was moderate-certainty evidence that powered active air surfaces and powered hybrid air surfaces probably reduce pressure ulcer incidence compared with standard hospital surfaces (risk ratios (RR) 0.42, 95% confidence intervals (CI) 0.29 to 0.63; 0.22, 0.07 to 0.66, respectively). The network for comfort suggested that powered active air-surfaces are probably slightly less comfortable than standard hospital mattresses (RR 0.80, 95% CI 0.69 to 0.94; moderate-certainty evidence). Conclusions This is the first network meta-analysis of the effects of support surfaces for pressure ulcer prevention. Powered active air-surfaces probably reduce pressure ulcer incidence, but are probably less comfortable than standard

  11. Support surfaces for pressure ulcer prevention: A network meta-analysis.

    Science.gov (United States)

    Shi, Chunhu; Dumville, Jo C; Cullum, Nicky

    2018-01-01

    Pressure ulcers are a prevalent and global issue and support surfaces are widely used for preventing ulceration. However, the diversity of available support surfaces and the lack of direct comparisons in RCTs make decision-making difficult. To determine, using network meta-analysis, the relative effects of different support surfaces in reducing pressure ulcer incidence and comfort and to rank these support surfaces in order of their effectiveness. We conducted a systematic review, using a literature search up to November 2016, to identify randomised trials comparing support surfaces for pressure ulcer prevention. Two reviewers independently performed study selection, risk of bias assessment and data extraction. We grouped the support surfaces according to their characteristics and formed evidence networks using these groups. We used network meta-analysis to estimate the relative effects and effectiveness ranking of the groups for the outcomes of pressure ulcer incidence and participant comfort. GRADE was used to assess the certainty of evidence. We included 65 studies in the review. The network for assessing pressure ulcer incidence comprised evidence of low or very low certainty for most network contrasts. There was moderate-certainty evidence that powered active air surfaces and powered hybrid air surfaces probably reduce pressure ulcer incidence compared with standard hospital surfaces (risk ratios (RR) 0.42, 95% confidence intervals (CI) 0.29 to 0.63; 0.22, 0.07 to 0.66, respectively). The network for comfort suggested that powered active air-surfaces are probably slightly less comfortable than standard hospital mattresses (RR 0.80, 95% CI 0.69 to 0.94; moderate-certainty evidence). This is the first network meta-analysis of the effects of support surfaces for pressure ulcer prevention. Powered active air-surfaces probably reduce pressure ulcer incidence, but are probably less comfortable than standard hospital surfaces. Most prevention evidence was of low or

  12. Support surfaces for pressure ulcer prevention: A network meta-analysis.

    Directory of Open Access Journals (Sweden)

    Chunhu Shi

    Full Text Available Pressure ulcers are a prevalent and global issue and support surfaces are widely used for preventing ulceration. However, the diversity of available support surfaces and the lack of direct comparisons in RCTs make decision-making difficult.To determine, using network meta-analysis, the relative effects of different support surfaces in reducing pressure ulcer incidence and comfort and to rank these support surfaces in order of their effectiveness.We conducted a systematic review, using a literature search up to November 2016, to identify randomised trials comparing support surfaces for pressure ulcer prevention. Two reviewers independently performed study selection, risk of bias assessment and data extraction. We grouped the support surfaces according to their characteristics and formed evidence networks using these groups. We used network meta-analysis to estimate the relative effects and effectiveness ranking of the groups for the outcomes of pressure ulcer incidence and participant comfort. GRADE was used to assess the certainty of evidence.We included 65 studies in the review. The network for assessing pressure ulcer incidence comprised evidence of low or very low certainty for most network contrasts. There was moderate-certainty evidence that powered active air surfaces and powered hybrid air surfaces probably reduce pressure ulcer incidence compared with standard hospital surfaces (risk ratios (RR 0.42, 95% confidence intervals (CI 0.29 to 0.63; 0.22, 0.07 to 0.66, respectively. The network for comfort suggested that powered active air-surfaces are probably slightly less comfortable than standard hospital mattresses (RR 0.80, 95% CI 0.69 to 0.94; moderate-certainty evidence.This is the first network meta-analysis of the effects of support surfaces for pressure ulcer prevention. Powered active air-surfaces probably reduce pressure ulcer incidence, but are probably less comfortable than standard hospital surfaces. Most prevention evidence was

  13. An economic analysis of the European commission’s proposal for a European account

    Directory of Open Access Journals (Sweden)

    Nicolas Kyriakides

    2013-12-01

    Full Text Available This paper performs an economic analysis of the European Commission’s proposal for a European-wide preservation order. Bentham’s utilitarianism theory suggests that legislators must take into mind the pleasures and pains associated with any legislation and to form laws in order to create the greatest good for the greatest number. These ideas are reflected in the modern economic theories of welfare economics. But are these principles sufficient to create effective legal rules and achieve justice? Section 2 of this work analyzes the difficulties in obtaining a provisional measure to preserve another party’s assets in another Member State of the European Union (“EU”. Section 3 sets out the Commission’s proposal for a European Account Preservation Order (“EAPO”. Section 4 applies welfare economics principles in order to identify the effect of legal rules related to this proposal, while it proposes an alternative approach to these principles. Lastly, section 4 makes suggestions on the proposal based on this alternative approach.

  14. Map-based multicriteria analysis to support interactive land use allocation

    NARCIS (Netherlands)

    Arciniegas Lopez, G.A.; Janssen, R.; Omtzigt, A.Q.A.

    2011-01-01

    This article focuses on the use of map-based multicriteria analysis to develop a negotiation support tool for land use allocation. Spatial multicriteria analysis is used to make explicit trade-offs between objectives and to provide guidance and feedback on the land use changes negotiated by the

  15. Generic Community System Specification: A Proposed Format for Reporting the Results of Microgrid Optimization Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Antonio [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-14

    This document provides a proposed format for reporting the results of microgrid optimization analysis. While the proposed format assumes that the modeling is conducted as part of a renewable energy retrofit of an existing diesel micro-grid, the format can certainly be adopted for other situations.

  16. H Scan/AHP advanced technology proposal evaluation process

    Energy Technology Data Exchange (ETDEWEB)

    Mack, S. [Energetics, Inc., Columbia, MD (United States); Valladares, M.R.S. de [National Renewable Energy Lab., Washington, DC (United States)

    1996-10-01

    It is anticipated that a family of high value/impact projects will be funded by the Hydrogen Program to field test hydrogen technologies that are at advanced stages of development. These projects will add substantial value to the Program in several ways, by: demonstrating successful integration of multiple advanced technologies, providing critical insight on issues of larger scale equipment design, construction and operations management, yielding cost and performance data for competitive analysis, refining and deploying enhanced safety measures. These projects will be selected through a competitive proposal evaluation process. Because of the significant scope and funding levels of projects at these development phases, Program management has indicated the need for an augmented proposal evaluation strategy to ensure that supported projects are implemented by capable investigative teams and that their successful completion will optimally advance programmatic objectives. These objectives comprise a complex set of both quantitative and qualitative factors, many of which can only be estimated using expert judgment and opinion. To meet the above need, the National Renewable Energy Laboratory (NREL) and Energetics Inc. have jointly developed a proposal evaluation methodology called H Scan/AHP. The H Scan component of the process was developed by NREL. It is a two-part survey instrument that substantially augments the type and scope of information collected in a traditional proposal package. The AHP (Analytic Hierarchy Process) component was developed by Energetics. The AHP is an established decision support methodology that allows the Program decision makers to evaluate proposals relatively based on a unique set of weighted criteria that they have determined.

  17. Proposal for the award of an industrial support contract for cooling water treatment

    CERN Document Server

    1999-01-01

    This document concerns the award of an Industrial Support contract for cooling water treatment for LEP, PS and SPS. Following a market survey carried out among 46 firms in twelve Member States, a call for tenders (IT-2557/ST) was sent on 26 July 1999 to seven firms and two consortia in five Member States. By the closing date, CERN had received five tenders from firms and consortia in three Member States. The Finance Committee is invited to agree to the negotiation of a contract with the consortium AQUAZUR (FR) and SCHILLING CHEMIE (DE), the lowest bidder after realignment, for an initial period of three years, starting on 1 January 2000, for a total amount not exceeding 976 482 Swiss francs, not subject to revision until 31 December 2001. The contract will include options for two further one-year extensions beyond the initial three year period. The consortium has indicated the following distribution by country of the work covered by this adjudication proposal: FR - 52% and DE - 48%.

  18. LANL Institutional Decision Support By Process Modeling and Analysis Group (AET-2)

    Energy Technology Data Exchange (ETDEWEB)

    Booth, Steven Richard [Los Alamos National Laboratory

    2016-04-04

    AET-2 has expertise in process modeling, economics, business case analysis, risk assessment, Lean/Six Sigma tools, and decision analysis to provide timely decision support to LANS leading to continuous improvement. This capability is critical during the current tight budgetary environment as LANS pushes to identify potential areas of cost savings and efficiencies. An important arena is business systems and operations, where processes can impact most or all laboratory employees. Lab-wide efforts are needed to identify and eliminate inefficiencies to accomplish Director McMillan’s charge of “doing more with less.” LANS faces many critical and potentially expensive choices that require sound decision support to ensure success. AET-2 is available to provide this analysis support to expedite the decisions at hand.

  19. A dynamic Bayesian network based approach to safety decision support in tunnel construction

    International Nuclear Information System (INIS)

    Wu, Xianguo; Liu, Huitao; Zhang, Limao; Skibniewski, Miroslaw J.; Deng, Qianli; Teng, Jiaying

    2015-01-01

    This paper presents a systemic decision approach with step-by-step procedures based on dynamic Bayesian network (DBN), aiming to provide guidelines for dynamic safety analysis of the tunnel-induced road surface damage over time. The proposed DBN-based approach can accurately illustrate the dynamic and updated feature of geological, design and mechanical variables as the construction progress evolves, in order to overcome deficiencies of traditional fault analysis methods. Adopting the predictive, sensitivity and diagnostic analysis techniques in the DBN inference, this approach is able to perform feed-forward, concurrent and back-forward control respectively on a quantitative basis, and provide real-time support before and after an accident. A case study in relating to dynamic safety analysis in the construction of Wuhan Yangtze Metro Tunnel in China is used to verify the feasibility of the proposed approach, as well as its application potential. The relationships between the DBN-based and BN-based approaches are further discussed according to analysis results. The proposed approach can be used as a decision tool to provide support for safety analysis in tunnel construction, and thus increase the likelihood of a successful project in a dynamic project environment. - Highlights: • A dynamic Bayesian network (DBN) based approach for safety decision support is developed. • This approach is able to perform feed-forward, concurrent and back-forward analysis and control. • A case concerning dynamic safety analysis in Wuhan Yangtze Metro Tunnel in China is presented. • DBN-based approach can perform a higher accuracy than traditional static BN-based approach

  20. Proposed Casey's Pond Improvement Project, Fermi National Accelerator Laboratory

    International Nuclear Information System (INIS)

    1995-05-01

    The U.S. Department of Energy (DOE) has prepared an Environmental Assessment (EA), evaluating the impacts associated with the proposed Casey's Pond Improvement Project at the Fermi National Accelerator Laboratory (Fermilab) in Batavia, Illinois. The improvement project would maximize the efficiency of the Fermilab Industrial Cooling Water (ICW) distribution system, which removes (via evaporation) the thermal load from experimental and other support equipment supporting the high energy physics program at Fermilab. The project would eliminate the risk of overheating during fixed target experiments, ensure that the Illinois Water Quality Standards are consistently achieved and provide needed additional water storage for fire protection. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required

  1. Intelligent support of X-ray qualitative analysis

    International Nuclear Information System (INIS)

    Arai, Hiroshi; Uota, Atsushi; Ishida, Hidenobu

    1995-01-01

    'X-ray Diffraction AI Qualitative Analysis System' which can support analytical operation was developed. The purpose of this development is that even a beginner analyst can obtain the accurate results as well as specialists. This system has three new functions. The first one is to determine the suitable measuring conditions automatically for samples or analytical aim. The second is to guide the method of peak search. And, the third is to determine searching conditions same as measuring conditions. These were realized by applying experts' knowledge with 'AI techniques' and were added to our qualitative analysis systems. A beginner analyses through dialogue with this system, and can get the same results as a specialist would get. (author)

  2. International Experiences and Frameworks to Support Country-Driven Low-Emissions Development

    Energy Technology Data Exchange (ETDEWEB)

    Benioff, R.; Cochran, J.; Cox, S.

    2012-08-01

    Countries can use low-emission development strategies (LEDS) to advance sustainable development, promote private-sector growth, and reduce greenhouse gas emissions. This paper proposes a framework -- or support infrastructure -- to enable the efficient exchange of LEDS-related knowledge and technical assistance. Under the proposed framework, countries share LEDS-related resources via coordinating forums, 'knowledge platforms,' and networks of experts and investors. The virtual 'knowledge platforms' foster learning by allowing countries to communicate with each other and share technical reports, data, and analysis tools in support of LEDS development. Investing in all elements of the framework in an integrated fashion increases the efficacy of support for country-driven LEDS.

  3. A new definition of burnout syndrome based on Farber's proposal

    Directory of Open Access Journals (Sweden)

    Mera Domingo

    2009-11-01

    Full Text Available Abstract Background Although diverse definitions have been construed for burnout syndrome, most authors consider it to be a single phenomenon, the result of chronic work-related stress. However, in order to enable specific intervention strategies to be adopted, it is first necessary to establish different profiles for the syndrome. In this respect, have been proposed three burnout types ("frenetic", "underchallenged" and "worn-out", each of which requires different means of dealing with frustration in the workplace. This study is an attempt to define and systematize the properties that characterize this typology proposal. Methods For this purpose, the documents considering preliminary typology were examined by means of qualitative content analysis supported by grounded theory. Semiotic analysis was then performed on the core category resulting from the previous analysis. Results A classification criterion, made up of three different burnout subtypes ("frenetic", "underchallenged", and "worn-out" capable of integrating the entire proposal was formulated. Discussion Understanding the development of burnout syndrome, as a succession of stages characterized by the progressive diminishing of dedication to work, could serve for the establishment of specific therapies and for the prevention of the syndrome.

  4. Altair Lander Life Support: Design Analysis Cycles 4 and 5

    Science.gov (United States)

    Anderson, Molly; Curley, Su; Rotter, Henry; Stambaugh, Imelda; Yagoda, Evan

    2011-01-01

    Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander team is pursuing efficient solutions to the technical challenges of human spaceflight. Life support design efforts up through Design Analysis Cycle (DAC) 4 focused on finding lightweight and reliable solutions for the Sortie and Outpost missions within the Constellation Program. In DAC-4 and later follow on work, changes were made to add functionality for new requirements accepted by the Altair project, and to update the design as knowledge about certain issues or hardware matured. In DAC-5, the Altair project began to consider mission architectures outside the Constellation baseline. Selecting the optimal life support system design is very sensitive to mission duration. When the mission goals and architecture change several trade studies must be conducted to determine the appropriate design. Finally, several areas of work developed through the Altair project may be applicable to other vehicle concepts for microgravity missions. Maturing the Altair life support system related analysis, design, and requirements can provide important information for developers of a wide range of other human vehicles.

  5. Strength Analysis of a Large-Size Supporting Structure for an Offshore Wind Turbine

    Directory of Open Access Journals (Sweden)

    Niklas Karol

    2017-04-01

    Full Text Available The offshore wind power industry is the branch of electric energy production from renewable sources which is most intensively developed in EU countries. At present, there is a tendency to install larger-power wind turbines at larger distances from the seashore, on relatively deep waters. Consequently, technological solutions for new supporting structures intended for deeper water regions are undergoing rapid development now. Various design types are proposed and analysed, starting from gravitational supports (GBS, through monopiles and 3D frame structures (jackets, tripods, and ending with floating and submerged supports anchored to the seabed by flexible connectors, including TLP type solutions.

  6. Seismic response analysis of structural system subjected to multiple support excitation

    International Nuclear Information System (INIS)

    Wu, R.W.; Hussain, F.A.; Liu, L.K.

    1978-01-01

    In the seismic analysis of a multiply supported structural system subjected to nonuniform excitations at each support point, the single response spectrum, the time history, and the multiple response spectrum are the three commonly employed methods. In the present paper the three methods are developed, evaluated, and the limitations and advantages of each method assessed. A numerical example has been carried out for a typical piping system. Considerably smaller responses have been predicted by the time history method than that by the single response spectrum method. This is mainly due to the fact that the phase and amplitude relations between the support excitations are faithfully retained in the time history method. The multiple response spectrum prediction has been observed to compare favourably with the time history method prediction. Based on the present evaluation, the multiple response spectrum method is the most efficient method for seismic response analysis of structural systems subjected to multiple support excitation. (Auth.)

  7. Enunciation and argumentation: proposals for the analysis of personal forms as argumentative resources in orality

    Directory of Open Access Journals (Sweden)

    Federico Testoni

    2017-02-01

    Full Text Available As part of an investigation about strategies and resources for the construction of social representations (Raiter, 2016 on orality, we propose to articulate an analysis of linguistic forms with the argumentative dimension of utterances. The aim of this paper is to review the methodology proposed by Lavandera (1984 for the analysis of the tension between the personal and the impersonal, interpreting the use of this dimension as an argumentative resource (Ducrot, 1984. From our interdiscursive perspective, we seek to show how the characterization of the enunciative roles can facilitate analysis of the positions of enunciation from which the meaning of statements is oriented (Guimarães, 1998. To this end, we will analyse three fragments of an interview by applying the study of the distribution of pronominal forms (Lavandera, 1984 and the argumentative chains (Ducrot, 1984. We believe that analysis as described from the perspective of discourse analysis will mean a contribution for future work on strategies for building social representations.

  8. The potential for meta-analysis to support decision analysis in ecology.

    Science.gov (United States)

    Mengersen, Kerrie; MacNeil, M Aaron; Caley, M Julian

    2015-06-01

    Meta-analysis and decision analysis are underpinned by well-developed methods that are commonly applied to a variety of problems and disciplines. While these two fields have been closely linked in some disciplines such as medicine, comparatively little attention has been paid to the potential benefits of linking them in ecology, despite reasonable expectations that benefits would be derived from doing so. Meta-analysis combines information from multiple studies to provide more accurate parameter estimates and to reduce the uncertainty surrounding them. Decision analysis involves selecting among alternative choices using statistical information that helps to shed light on the uncertainties involved. By linking meta-analysis to decision analysis, improved decisions can be made, with quantification of the costs and benefits of alternate decisions supported by a greater density of information. Here, we briefly review concepts of both meta-analysis and decision analysis, illustrating the natural linkage between them and the benefits from explicitly linking one to the other. We discuss some examples in which this linkage has been exploited in the medical arena and how improvements in precision and reduction of structural uncertainty inherent in a meta-analysis can provide substantive improvements to decision analysis outcomes by reducing uncertainty in expected loss and maximising information from across studies. We then argue that these significant benefits could be translated to ecology, in particular to the problem of making optimal ecological decisions in the face of uncertainty. Copyright © 2013 John Wiley & Sons, Ltd.

  9. Radar Waveform Recognition Based on Time-Frequency Analysis and Artificial Bee Colony-Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Lutao Liu

    2018-04-01

    Full Text Available In this paper, a system for identifying eight kinds of radar waveforms is explored. The waveforms are the binary phase shift keying (BPSK, Costas codes, linear frequency modulation (LFM and polyphase codes (including P1, P2, P3, P4 and Frank codes. The features of power spectral density (PSD, moments and cumulants, instantaneous properties and time-frequency analysis are extracted from the waveforms and three new features are proposed. The classifier is support vector machine (SVM, which is optimized by artificial bee colony (ABC algorithm. The system shows well robustness, excellent computational complexity and high recognition rate under low signal-to-noise ratio (SNR situation. The simulation results indicate that the overall recognition rate is 92% when SNR is −4 dB.

  10. Supporting cognition in systems biology analysis: findings on users' processes and design implications.

    Science.gov (United States)

    Mirel, Barbara

    2009-02-13

    Current usability studies of bioinformatics tools suggest that tools for exploratory analysis support some tasks related to finding relationships of interest but not the deep causal insights necessary for formulating plausible and credible hypotheses. To better understand design requirements for gaining these causal insights in systems biology analyses a longitudinal field study of 15 biomedical researchers was conducted. Researchers interacted with the same protein-protein interaction tools to discover possible disease mechanisms for further experimentation. Findings reveal patterns in scientists' exploratory and explanatory analysis and reveal that tools positively supported a number of well-structured query and analysis tasks. But for several of scientists' more complex, higher order ways of knowing and reasoning the tools did not offer adequate support. Results show that for a better fit with scientists' cognition for exploratory analysis systems biology tools need to better match scientists' processes for validating, for making a transition from classification to model-based reasoning, and for engaging in causal mental modelling. As the next great frontier in bioinformatics usability, tool designs for exploratory systems biology analysis need to move beyond the successes already achieved in supporting formulaic query and analysis tasks and now reduce current mismatches with several of scientists' higher order analytical practices. The implications of results for tool designs are discussed.

  11. MAS: Malware Analysis System Based on Hardware-Assisted Virtualization Technology

    Science.gov (United States)

    Kim, Taehyoung; Kim, Inhyuk; Min, Changwoo; Eom, Young Ik

    There are many analysis techniques in order to analyze malicious codes. However, recently malicious codes often evade detection using stealthy obfuscation techniques, and attack computing systems. We propose an enhanced dynamic binary instrumentation using hardware-assisted virtualization technology. As a machine-level analyzer, our system can be isolated from almost the whole threats of malware, and provides single step analysis environment. Proposed system also supports rapid system call analysis environment. We implement our malware analysis system (referred as MAS) on the KVM hypervisor with Intel VT-x virtualization support. Our experiments with benchmarks show that the proposed system provides efficient analysis environment with low overhead.

  12. Proposal of Innovative Approaches of Relationship Marketing in Business

    Directory of Open Access Journals (Sweden)

    Viliam Lendel

    2015-03-01

    Full Text Available The aim of this paper is to propose innovative approaches to relationship marketing that affect the process of building relationships with customers, based on a detailed analysis of the literary sources and the research. This proposal is supported by the information technology e-CRM and social CRM. The paper contains a detailed description of the procedure for successfully implementing innovative approaches to relationship marketing in business. This should serve mainly to marketing managers as a valuable tool in their use of innovative approaches to relationship marketing, especially in the process of obtaining innovative ideas from customers, in order to identify their needs and requirements. Furthermore, the paper contains the main results of our research aimed at identifying the extent of utilization of innovative approaches to relationship marketing in Slovak businesses. A total of 207 respondents were involved in the research (medium and large businesses and following methods were used: comparative method of qualitative evaluation method, the method of structured and structured interview method, observation, document analysis method (method of content analysis and questionnaire method.

  13. Proposed standby gasoline rationing plan. Economic and regulatory analysis draft

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-01

    This economic and regulatory analysis meets the requirements of the Energy Policy and Conservation Act, which calls for an evaluation of the potential economic impacts of the gasoline rationing contingency plan. In addition, this analysis is intended to satisfy the requirements of the President's Executive Order No. 12044 of March 23, 1978, regarding government regulations, and provides an inflationary impact statement for the proposed rationing plan. To perform the analysis of rationing program impacts on the total national economy, three separate projections were required. First, a projection is made of the ''normal'' U.S. economy for a future period--the last quarter of 1980 through the third quarter of 1981 in this analysis. Second, a projection is made of the impacts which a petroleum supply interruption would have on the U.S. economy during this future period, assuming that DOE's standby allocation and price control regulations were implemented for crude oil and products. Third, and most significant, an estimate is made of the incremental impacts of the gasoline rationing program on this already-perturbed future U.S. economy.

  14. Numerical Control Machine Tool Fault Diagnosis Using Hybrid Stationary Subspace Analysis and Least Squares Support Vector Machine with a Single Sensor

    Directory of Open Access Journals (Sweden)

    Chen Gao

    2017-03-01

    Full Text Available Tool fault diagnosis in numerical control (NC machines plays a significant role in ensuring manufacturing quality. However, current methods of tool fault diagnosis lack accuracy. Therefore, in the present paper, a fault diagnosis method was proposed based on stationary subspace analysis (SSA and least squares support vector machine (LS-SVM using only a single sensor. First, SSA was used to extract stationary and non-stationary sources from multi-dimensional signals without the need for independency and without prior information of the source signals, after the dimensionality of the vibration signal observed by a single sensor was expanded by phase space reconstruction technique. Subsequently, 10 dimensionless parameters in the time-frequency domain for non-stationary sources were calculated to generate samples to train the LS-SVM. Finally, the measured vibration signals from tools of an unknown state and their non-stationary sources were separated by SSA to serve as test samples for the trained SVM. The experimental validation demonstrated that the proposed method has better diagnosis accuracy than three previous methods based on LS-SVM alone, Principal component analysis and LS-SVM or on SSA and Linear discriminant analysis.

  15. Directed Graph Methodology for Acquisition Path Analysis: a possible tool to support the state-level approach

    International Nuclear Information System (INIS)

    Vincze, Arpad; Nemeth, Andras

    2013-01-01

    According to a recent statement, the IAEA seeks to develop a more effective safeguards system to achieve greater deterrence, because deterrence of proliferation is much more effective than detection. To achieve this goal, a less predictive safeguards system is being developed based on the advanced state-level approach that is driven by all available safeguards-relevant information. The 'directed graph analysis' is recommended as a possible methodology to implement acquisition path analysis by the IAEA to support the State evaluation process. The basic methodology is simple, well established, powerful, and its adaptation to the modelling of the nuclear profile of a State requires minimum software development. Based on this methodology the material flow network model has been developed under the Hungarian Support Programme to the IAEA, which is described in detail. In the proposed model, materials in different chemical and physical form can flow through pipes representing declared processes, material transports, diversions or undeclared processes. The nodes of the network are the material types, while the edges of the network are the pipes. A state parameter (p) is assigned to each node and edge representing the probability of their existence in the State. The possible application of this model in the State-level analytical approach will be discussed and outlook for further work will be given. The paper is followed by the slides of the presentation

  16. Design of Graph Analysis Model to support Decision Making

    International Nuclear Information System (INIS)

    An, Sang Ha; Lee, Sung Jin; Chang, Soon Heung; Kim, Sung Ho; Kim, Tae Woon

    2005-01-01

    Korea is meeting the growing electric power needs by using nuclear, fissile, hydro energy and so on. But we can not use fissile energy forever, and the people's consideration about nature has been changed. So we have to prepare appropriate energy by the conditions before people need more energy. And we should prepare dynamic response because people's need would be changed as the time goes on. So we designed graphic analysis model (GAM) for the dynamic analysis of decision on the energy sources. It can support Analytic Hierarchy Process (AHP) analysis based on Graphic User Interface

  17. A support vector density-based importance sampling for reliability assessment

    International Nuclear Information System (INIS)

    Dai, Hongzhe; Zhang, Hao; Wang, Wei

    2012-01-01

    An importance sampling method based on the adaptive Markov chain simulation and support vector density estimation is developed in this paper for efficient structural reliability assessment. The methodology involves the generation of samples that can adaptively populate the important region by the adaptive Metropolis algorithm, and the construction of importance sampling density by support vector density. The use of the adaptive Metropolis algorithm may effectively improve the convergence and stability of the classical Markov chain simulation. The support vector density can approximate the sampling density with fewer samples in comparison to the conventional kernel density estimation. The proposed importance sampling method can effectively reduce the number of structural analysis required for achieving a given accuracy. Examples involving both numerical and practical structural problems are given to illustrate the application and efficiency of the proposed methodology.

  18. A meta-analysis of work-family conflict and social support.

    Science.gov (United States)

    French, Kimberly A; Dumani, Soner; Allen, Tammy D; Shockley, Kristen M

    2018-03-01

    The relationship between social support and work-family conflict is well-established, but the notion that different forms, sources, and types of social support as well as contextual factors can alter this relationship has been relatively neglected. To address this limitation, the current study provides the most comprehensive and in-depth examination of the relationship between social support and work-family conflict to date. We conduct a meta-analysis based on 1021 effect sizes and 46 countries to dissect the social support and work-family conflict relationship. Using social support theory as a theoretical framework, we challenge the assumption that social support measures are interchangeable by comparing work/family support relationships with work-family conflict across different support forms (behavior, perceptions), sources (e.g., supervisor, coworker, spouse), types (instrumental, emotional), and national contexts (cultural values, economic factors). National context hypotheses use a strong inferences paradigm in which utility and value congruence theoretical perspectives are pitted against one another. Significant results concerning support source are in line with social support theory, indicating that broad sources of support are more strongly related to work-family conflict than are specific sources of support. In line with utility perspective from social support theory, culture and economic national context significantly moderate some of the relationships between work/family support and work interference with family, indicating that social support is most beneficial in contexts in which it is needed or perceived as useful. The results suggest that organizational support may be the most important source of support overall. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  19. Structural design and analysis for the ISX-C/ATF tokamak of the vacuum vessel, coil joints, and supports

    International Nuclear Information System (INIS)

    Mayhall, J.A.; Cain, W.D.; Hammonds, C.J.; Johnson, R.L.; Gray, W.H.

    1981-01-01

    The ISX-C/ATF is being designed as a test bed for advanced toroidal concepts. Because of numerous design concepts being evaluated, a flexible, easily changeable structural-design math-model was needed to afford quick evalution of the structural feasibility of the many proposed concepts. To satisfy this need, the NASTRAN Automated Multi-Stage Substructures technique was used to build a quick-changeable math model. This technique was especially needed because all the coils, first wall and diagnostic devices are to be supported by the vacuum vessel, requiring the entire structure to be analyzed as a system. Without the use of the substructuring technique, the required man hours and computer core would have made timely design analysis impossible. To illustrate the technique, the detailed design analysis of the concept Torsatron (with helical coils and T.F. coils) is presented

  20. How Can We Make Progress with Decision Support Systems in Landscape and River Basin Management? Lessons Learned from a Comparative Analysis of Four Different Decision Support Systems

    Science.gov (United States)

    Volk, Martin; Lautenbach, Sven; van Delden, Hedwig; Newham, Lachlan T. H.; Seppelt, Ralf

    2010-12-01

    This article analyses the benefits and shortcomings of the recently developed decision support systems (DSS) FLUMAGIS, Elbe-DSS, CatchMODS, and MedAction. The analysis elaborates on the following aspects: (i) application area/decision problem, (ii) stakeholder interaction/users involved, (iii) structure of DSS/model structure, (iv) usage of the DSS, and finally (v) most important shortcomings. On the basis of this analysis, we formulate four criteria that we consider essential for the successful use of DSS in landscape and river basin management. The criteria relate to (i) system quality, (ii) user support and user training, (iii) perceived usefulness and (iv) user satisfaction. We can show that the availability of tools and technologies for DSS in landscape and river basin management is good to excellent. However, our investigations indicate that several problems have to be tackled. First of all, data availability and homogenisation, uncertainty analysis and uncertainty propagation and problems with model integration require further attention. Furthermore, the appropriate and methodological stakeholder interaction and the definition of `what end-users really need and want' have been documented as general shortcomings of all four examples of DSS. Thus, we propose an iterative development process that enables social learning of the different groups involved in the development process, because it is easier to design a DSS for a group of stakeholders who actively participate in an iterative process. We also identify two important lines of further development in DSS: the use of interactive visualization tools and the methodology of optimization to inform scenario elaboration and evaluate trade-offs among environmental measures and management alternatives.

  1. MOJECT: MOTION ANALYSIS TO SUPPORT ASSESSMENT OF SURGICAL SKILLS

    NARCIS (Netherlands)

    Uineken, Ruben; Groot Jebbink, Erik; Halfwerk, F.R.; Bulten, Anne; Knoben, Peter; Roux, Moritz; Wicik, Ola; Groenier, Marleen

    2018-01-01

    Assessment of surgical skills is usually performed through direct observation by experts. This is subjective, expensive and requires assessor training. Motion analysis can support objective and cost-effective assessment. The aim of the current study is to design a low-cost, unobtrusive system for

  2. 3D Bearing Capacity of Structured Cells Supported on Cohesive Soil: Simplified Analysis Method

    Directory of Open Access Journals (Sweden)

    Martínez-Galván Sergio Antonio

    2013-06-01

    Full Text Available In this paper a simplified analysis method to compute the bearing capacity of structured cell foundations subjected to vertical loading and supported in soft cohesive soil is proposed. A structured cell is comprised by a top concrete slab structurally connected to concrete external walls that enclose the natural soil. Contrary to a box foundation it does not include a bottom slab and hence, the soil within the walls becomes an important component of the structured cell. This simplified method considers the three-dimensional geometry of the cell, the undrained shear strength of cohesive soils and the existence of structural continuity between the top concrete slab and the surrounding walls, along the walls themselves and the walls structural joints. The method was developed from results of numerical-parametric analyses, from which it was found that structured cells fail according to a punching-type mechanism.

  3. Customer Purchasing Behavior Analysis as Alternatives for Supporting In-Store Green Marketing Decision-Making

    Directory of Open Access Journals (Sweden)

    M. Alex Syaekhoni

    2017-11-01

    Full Text Available Due to increasing concerns about environmental protection, the environmental sustainability of businesses has been widely considered in the manufacturing and supply chain context. Further, its adoption has been implemented in the retail industry for marketing field, including green product promotion. This study aimed to propose a customer purchasing behavior analysis as an alternative for supporting decision-making in order to promote green products in retail stores. Hence, right-on-target marketing strategies can be implemented appropriately. The study was carried out using shopping path data collected by radio frequency identification (RFID from a large retail store in Seoul, South Korea. In addition, the store layout and its traffic were also analyzed. This method is expected to help experts providing appropriate decision alternatives. In addition, it can help retailers in order to increase product sales and achieve high levels of customer satisfaction.

  4. Full cost accounting in the analysis of separated waste collection efficiency: A methodological proposal.

    Science.gov (United States)

    D'Onza, Giuseppe; Greco, Giulio; Allegrini, Marco

    2016-02-01

    Recycling implies additional costs for separated municipal solid waste (MSW) collection. The aim of the present study is to propose and implement a management tool - the full cost accounting (FCA) method - to calculate the full collection costs of different types of waste. Our analysis aims for a better understanding of the difficulties of putting FCA into practice in the MSW sector. We propose a FCA methodology that uses standard cost and actual quantities to calculate the collection costs of separate and undifferentiated waste. Our methodology allows cost efficiency analysis and benchmarking, overcoming problems related to firm-specific accounting choices, earnings management policies and purchase policies. Our methodology allows benchmarking and variance analysis that can be used to identify the causes of off-standards performance and guide managers to deploy resources more efficiently. Our methodology can be implemented by companies lacking a sophisticated management accounting system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Supporting structures of the toroidal field coils of intor-net

    International Nuclear Information System (INIS)

    Farfaletti-Casali, F.; Biggio, M.; Macco, A.; Perfumo, A.; Reale, M.

    1984-01-01

    The design of the toroidal field (TF) coil supporting structures for INTOR-NET Phase 2A (European Configuration) is described. In order to identify the proposed design several preliminary evaluations were performed. These evaluations indicated that suitable supporting structures are those shown in the annexed figures, where each coil is guided and centered by a separate reinforcing structure, on which the intercoil structures are attached. A simplified structural analysis was carried out considering only the cyclic out-of-plane loads due to the poloidal field, acting on the coils, since this constitutes the most critical loading condition due to its impact on the fatigue behavior of the material. This analysis was performed with finite element method for displacements and stresses calculations by using the SAP IV-code. The calcaulation model was made with the aid of the GIFTS system. The results show that the maximum equivalent stress does not exceed the stress limit assumed in the INTOR specifications for stainless steel (AISI 316 type) at cryogenic temperature and under cyclic loading, for the operating conditions of INTOR. Consequently the proposed concept for the support of the TF coils can be considered a workable scheme. Further detailed analysis must be done, so as to demonstrate the complete feasibility of the system. (orig.)

  6. Formulations and algorithms for problems on rock mass and support deformation during mining

    Science.gov (United States)

    Seryakov, VM

    2018-03-01

    The analysis of problem formulations to calculate stress-strain state of mine support and surrounding rocks mass in rock mechanics shows that such formulations incompletely describe the mechanical features of joint deformation in the rock mass–support system. The present paper proposes an algorithm to take into account the actual conditions of rock mass and support interaction and the algorithm implementation method to ensure efficient calculation of stresses in rocks and support.

  7. Review of a Proposed Quarterly Coal Publication

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  8. Analysis of federal options to support photovoltaic industry growth

    Energy Technology Data Exchange (ETDEWEB)

    Bennington, G.; Cherdak, A.; Williams, F.

    1979-05-01

    This report presents the methodology and results of an analysis to determine the impact and leverage of federal options for supporting the growth of the photovoltaic industry. Results were projected for combinations of the following: an aggressive federal research and development program, achievement of a technological breakthrough, and immediate or breakthrough-dependent incentives including direct price reductions, keyed-to-breakeven subsidies, and federal puchases. The modeling methodology and market assumptions were also tested to determine their effect on analysis results.

  9. Bayesian networks modelling in support to cross cutting analysis of water supply and sanitation in developing countries

    Science.gov (United States)

    Dondeynaz, C.; López Puga, J.; Carmona Moreno, C.

    2013-02-01

    Despite the efforts made towards the millennium goals targets during the last decade, access to improved water supply or basic sanitation remains still not accessible for millions of people across the world. This paper proposes a set of models that use 25 key variables from the WatSan4Dev dataset and country profiles involving Water Supply and Sanitation (Dondeynaz et al., 2012). This paper proposes the use of Bayesian Network modelling methods because adapted to the management of non-normal distribution, and integrate a qualitative approach for data analysis. They also offer the advantage to integrate preliminary knowledge into the probabilistic models. The statistical performance of the proposed models ranges between 80 and 95% which is very satisfactory taking into account the strong heterogeneity of variables. Probabilistic scenarios run from the models allow a quantification of the relationships between human development, external support, governance aspects, economic activities and Water Supply and Sanitation (WSS) access. According to models proposed in this paper, a strong poverty reduction will induce an increment of the WSS access equal to 75-76% through: (1) the organisation of on-going urbanisation process to avoid slums development; and, (2) the improvement of health care for instance for children. On one side, improving governance, such as institutional efficiency, capacities to make and apply rules or control of corruption will also have a positive impact on WSS sustainable development. The first condition for an increment of the WSS access remains of course an improvement of the economic development with an increment of household income. Moreover, a significant country environmental commitment associated with civil society freedom of expression constitutes a favourable environment for sustainable WSS services delivery. Intensive agriculture through irrigation practises also appears as a mean for sustainable WSS thanks to multi-uses and

  10. Cognitive task load analysis : Allocating tasks and designing support

    NARCIS (Netherlands)

    Neerincx, M.A.

    2003-01-01

    We present a method for Cognitive Task Analysis that guides the early stages of software development, aiming at an optimal cognitive load for operators of process control systems. The method is based on a practical theory of cognitive task load and support. In addition to the classical measure

  11. Proposal of Optimization of the Process of Credit Analysis to the Self-Employment Segment

    Directory of Open Access Journals (Sweden)

    Armando Pereira-López

    2017-06-01

    Full Text Available As part of the banking system transformation process in Cuba, from 2011 is provided the granting of credits to persons authorized to engage in self-employment and other forms of non-state management. These new types of credit must be subject to strict rules of risk, analysis by the banking institution, what has caused it to become a slow and complicated process. According to the situation described, an analysis of the credit granted to this segment is carried out at the Branch 8312 of the Popular Saving Bank, determining the main limitations and making proposals to improve this said process through the mapping process tool that Proposes the Microsave Methodology which reduce the response time to the requests of the clients and contribute to the provision of more efficient services. 

  12. Hydraulic modeling support for conflict analysis: The Manayunk canal revisited

    International Nuclear Information System (INIS)

    Chadderton, R.A.; Traver, R.G.; Rao, J.N.

    1992-01-01

    This paper presents a study which used a standard, hydraulic computer model to generate detailed design information to support conflict analysis of a water resource use issue. As an extension of previous studies, the conflict analysis in this case included several scenarios for stability analysis - all of which reached the conclusion that compromising, shared access to the water resources available would result in the most benefits to society. This expected equilibrium outcome was found to maximize benefit-cost estimates. 17 refs., 1 fig., 2 tabs

  13. Configuration analysis of pipe support for primary cooling using Ps + Caepipe code

    International Nuclear Information System (INIS)

    Sitandung, Y. B.; Pustandyo, W.; Sujalmo, S.

    1998-01-01

    Pipe stress evaluation and support loads has been analyzed on piping segment of RSG-GAS primary cooling system. This paper describes an analysis method of piping system with the use of computer Code PS + CAEPIPE Version 3.4.05.W. From the selected pipe segment, the data of pipe characteristic, material properties, operation condition, equipment and supports were used input. The final evaluation result of primary cooling pipe segment show that actual stress dead weight and seismic load are less than allowable limits (stress ratio 0.101 for deadweight 0.35 for seismic load). From the above ratio, it can be concluded that ratio of pipe support configuration to stress distribution is acceptable, and based on analysis result, the Code used by INTERATOM was sufficiently accurate

  14. 48 CFR 915.404-2-70 - Audit as an aid in proposal analysis.

    Science.gov (United States)

    2010-10-01

    ... ENERGY CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 915.404-2-70 Audit as an aid in proposal analysis. (a) When a contract price will be based on cost or pricing data...-reimbursement contracts, interim and final price redeterminations, and target and settlement of incentive...

  15. Disaster Reintegration Model: A Qualitative Analysis on Developing Korean Disaster Mental Health Support Model

    Directory of Open Access Journals (Sweden)

    Yun-Jung Choi

    2018-02-01

    Full Text Available This study sought to describe the mental health problems experienced by Korean disaster survivors, using a qualitative research method to provide empirical resources for effective disaster mental health support in Korea. Participants were 16 adults or elderly adults who experienced one or more disasters at least 12 months ago recruited via theoretical sampling. Participants underwent in-depth individual interviews on their disaster experiences, which were recorded and transcribed for qualitative analysis, which followed Strauss and Corbin’s (1998 Grounded theory. After open coding, participants’ experiences were categorized into 130 codes, 43 sub-categories and 17 categories. The categories were further analyzed in a paradigm model, conditional model and the Disaster Reintegration Model, which proposed potentially effective mental health recovery strategies for disaster survivors, health providers and administrators. To provide effective assistance for mental health recovery of disaster survivors, both personal and public resilience should be promoted while considering both cultural and spiritual elements.

  16. Identification of transformer fault based on dissolved gas analysis using hybrid support vector machine-modified evolutionary particle swarm optimisation

    Science.gov (United States)

    2018-01-01

    Early detection of power transformer fault is important because it can reduce the maintenance cost of the transformer and it can ensure continuous electricity supply in power systems. Dissolved Gas Analysis (DGA) technique is commonly used to identify oil-filled power transformer fault type but utilisation of artificial intelligence method with optimisation methods has shown convincing results. In this work, a hybrid support vector machine (SVM) with modified evolutionary particle swarm optimisation (EPSO) algorithm was proposed to determine the transformer fault type. The superiority of the modified PSO technique with SVM was evaluated by comparing the results with the actual fault diagnosis, unoptimised SVM and previous reported works. Data reduction was also applied using stepwise regression prior to the training process of SVM to reduce the training time. It was found that the proposed hybrid SVM-Modified EPSO (MEPSO)-Time Varying Acceleration Coefficient (TVAC) technique results in the highest correct identification percentage of faults in a power transformer compared to other PSO algorithms. Thus, the proposed technique can be one of the potential solutions to identify the transformer fault type based on DGA data on site. PMID:29370230

  17. Identification of transformer fault based on dissolved gas analysis using hybrid support vector machine-modified evolutionary particle swarm optimisation.

    Directory of Open Access Journals (Sweden)

    Hazlee Azil Illias

    Full Text Available Early detection of power transformer fault is important because it can reduce the maintenance cost of the transformer and it can ensure continuous electricity supply in power systems. Dissolved Gas Analysis (DGA technique is commonly used to identify oil-filled power transformer fault type but utilisation of artificial intelligence method with optimisation methods has shown convincing results. In this work, a hybrid support vector machine (SVM with modified evolutionary particle swarm optimisation (EPSO algorithm was proposed to determine the transformer fault type. The superiority of the modified PSO technique with SVM was evaluated by comparing the results with the actual fault diagnosis, unoptimised SVM and previous reported works. Data reduction was also applied using stepwise regression prior to the training process of SVM to reduce the training time. It was found that the proposed hybrid SVM-Modified EPSO (MEPSO-Time Varying Acceleration Coefficient (TVAC technique results in the highest correct identification percentage of faults in a power transformer compared to other PSO algorithms. Thus, the proposed technique can be one of the potential solutions to identify the transformer fault type based on DGA data on site.

  18. Identification of transformer fault based on dissolved gas analysis using hybrid support vector machine-modified evolutionary particle swarm optimisation.

    Science.gov (United States)

    Illias, Hazlee Azil; Zhao Liang, Wee

    2018-01-01

    Early detection of power transformer fault is important because it can reduce the maintenance cost of the transformer and it can ensure continuous electricity supply in power systems. Dissolved Gas Analysis (DGA) technique is commonly used to identify oil-filled power transformer fault type but utilisation of artificial intelligence method with optimisation methods has shown convincing results. In this work, a hybrid support vector machine (SVM) with modified evolutionary particle swarm optimisation (EPSO) algorithm was proposed to determine the transformer fault type. The superiority of the modified PSO technique with SVM was evaluated by comparing the results with the actual fault diagnosis, unoptimised SVM and previous reported works. Data reduction was also applied using stepwise regression prior to the training process of SVM to reduce the training time. It was found that the proposed hybrid SVM-Modified EPSO (MEPSO)-Time Varying Acceleration Coefficient (TVAC) technique results in the highest correct identification percentage of faults in a power transformer compared to other PSO algorithms. Thus, the proposed technique can be one of the potential solutions to identify the transformer fault type based on DGA data on site.

  19. Combining morphological analysis and Bayesian Networks for strategic decision support

    CSIR Research Space (South Africa)

    De Waal, AJ

    2007-12-01

    Full Text Available Morphological analysis (MA) and Bayesian networks (BN) are two closely related modelling methods, each of which has its advantages and disadvantages for strategic decision support modelling. MA is a method for defining, linking and evaluating...

  20. Proposal for the award of an industrial services contract for software support for industrial controls

    CERN Document Server

    2000-01-01

    This document concerns the award of an Industrial Services contract for software support for industrial controls. Following a market survey carried out among 68 firms in twelve Member States, a call for tenders (IT-2711/ST) was sent on 12 April 2000 to nine firms and five consortia in eight Member States. By the closing date, CERN had received seven tenders from two firms and five consortia in six Member States. The Finance Committee is invited to agree to the negotiation of a contract with the firm GTD (ES), the lowest bidder, for an initial period of three years from 1 October 2000, for a total amount not exceeding 4 500 000 Swiss francs, not subject to revision. The contract will include an option for two one-year extensions beyond the initial three-year period. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: ES?100%.

  1. WORKPLACE SOCIAL SUPPORT AND WORK–FAMILY CONFLICT: A META-ANALYSIS CLARIFYING THE INFLUENCE OF GENERAL AND WORK–FAMILY-SPECIFIC SUPERVISOR AND ORGANIZATIONAL SUPPORT

    OpenAIRE

    KOSSEK, ELLEN ERNST; PICHLER, SHAUN; BODNER, TODD; HAMMER, LESLIE B.

    2011-01-01

    This article uses meta-analysis to develop a model integrating research on relationships between employee perceptions of general and work–family-specific supervisor and organizational support and work–family conflict. Drawing on 115 samples from 85 studies comprising 72,507 employees, we compared the relative influence of 4 types of workplace social support to work–family conflict: perceived organizational support (POS); supervisor support; perceived organizational work–family support, also k...

  2. Environmental impact analysis; the example of the proposed Trans-Alaska Pipeline

    Science.gov (United States)

    Brew, David A.

    1974-01-01

    The environmental impact analysis made as required by the National Environmental Policy Act of 1969 for the proposed trans-Alaska pipeline included consideration of the (1) technologically complex and geographically extensive proposed project, (2) extremely different physical environments across Alaska along the proposed route and elsewhere in Alaska and in Canada along alternative routes, (3) socioeconomic environment of the State of Alaska, and (4) a wide variety of alternatives. The analysis was designed specifically to fit the project and environment that would be affected. The environment was divided into two general parts--natural physical systems and superposed socioeconomic systems--and those parts were further divided into discipline-oriented systems or components that were studied and analyzed by scientists of the appropriate discipline. Particular attention was given to potential feedback loops in the impact network and to linkages between the project's impacting effects and the environment. The results of the analysis as reported in the final environmental impact statement were that both unavoidable and threatened environmental impacts would result from construction, operation, and maintenance of the proposed pipeline system and the developments related to it. The principal unavoidable effects would be (1) disturbances of terrain, fish and wildlife habitat, and human environs, (2) the results of the discharge of effluent from the tanker-ballast-treatment facility into Port Valdez and of some indeterminate amount of oil released into the ocean from tank-cleaning operations at sea, and (3) the results associated with increased human pressures of all kinds on the environment. Other unavoidable effects would be those related to increase of State and Native Corporation revenues, accelerated cultural change of the Native population, and extraction of the oil and gas resource. The main threatened environmental effects would all be related to unintentional oil

  3. A Knowledge-Based Expert System Using MFM Model for Operator Supporting

    International Nuclear Information System (INIS)

    Mo, Kun; Seong, Poong Hyun

    2005-01-01

    In this paper, a knowledge-based expert system using MFM (Multi-level Flow Modeling) is proposed for enhancing the operators' ability to cope with various situations in nuclear power plant. There are many complicated situations, in which regular and suitable operations should be done by operators accordingly. In order to help the operator to assess the situations promptly and accurately, and to regulate their operations according to these situations. it is necessary to develop an expert systems to help the operator for the fault diagnosis, alarm analysis, and operation results estimation for each operation. Many kinds of operator supporting systems focusing on different functions have been developed. Most of them used various methodologies for single diagnosis function or operation permission function. The proposed system integrated functions of fault diagnosis, alarm analysis and operation results estimation by the MFM basic algorithm for the operator supporting

  4. 'RECASS'. Radioecological analysis support system

    International Nuclear Information System (INIS)

    Shershakov, V.

    1998-01-01

    The RECASS is developed as a computer system designed for radiation monitoring and decision-making support in a nuclear emergency. The RECASS system has excellent capabilities for collecting, storing, and presenting data from the radiological situation of contaminated areas. It is well designed for modeling radionuclide migration in the environmental media and for assessing countermeasures in terms of doses received by population groups as a result of radioactive contamination. For RECASS to be used as a basis for solving the problems of radioecological analysis, it is essential that mapping facilities are provided and that scaling capabilities allow data to be presented with the necessary degree of detail and accuracy. Because of the on-line links with the operating network of radiological monitoring, RECASS is capable of collecting meteorological and radiological data from across the country and storing this information in its databases. The availability of data from the network of radiological monitoring makes it possible to develop RECASS as a real-time emergency response system. (R.P.)

  5. Consumer support for a public utilities commission in Hong Kong

    International Nuclear Information System (INIS)

    Woo, C.K.; Cheng, Y.S.; Law, A.; Zarnikau, J.; Ho, S.T.; Leung, H.Y.

    2015-01-01

    Hong Kong's electricity service is superbly reliable and price-reasonable when compared to those of the major cities in the OECD countries. Based on the rate of return regulation in the U.S., the current scheme of control agreement (SCA) regulating the two local integrated investor-owned utilities (IOUs) will expire in 2018 (or in 2023 after an optional 5-year extension), thus offering an opportune time to consider proposals with long lead time to modify or replace the SCA. The proposals made to date range from modifications of the SCA to electricity market restructure. These proposals, however, overlook two important aspects of regulatory governance: transparency and public involvement. This paper estimates consumer support for the proposal to establish a Hong Kong public utilities commission (HKPUC) to improve the current regulatory process. Based on the responses collected in mid-2014 via a face-to-face survey of 1100 Hong Kong residents, we find that at the 1.5% bill surcharge, about 70% the respondents are estimated to support an HKPUC. Thus, there is sufficient consumer support for a financially viable HKPUC, implying that Hong Kong should consider the possibility of establishing an HKPUC, notwithstanding the substantial challenges to be overcome prior to its implementation. - Highlights: • Hong Kong's regulatory process lacks transparency and public involvement. • A survey data analysis indicates a majority support for a Hong Kong PUC. • A Hong Kong PUC can be financially viable without public funding. • A Hong Kong PUC proposal deserves further consideration

  6. A System Supporting the Analysis of Motorway Traffic Accidents

    Directory of Open Access Journals (Sweden)

    Davide Anghinolfi

    2015-12-01

    Full Text Available This work presents a business intelligence tool for monitoring traffic accidents on motorways and supporting decisions relevant to road safety. The system manages information on road characteristics, traffic accidents and traffic volumes and produces reports for monitoring the evolution of key performance indicators for road safety, supporting decisions on actions for risk mitigation and safety improvements for road users. The paper illustrates the different types of analyses performed by the system. Pattern based analysis is used to evaluate safety performance indicators for the road sections matching defined patterns. Two different road segmentation algorithms, used to identify the most critical road sections according to various severity indicators, are presented and discussed. Differential analysis compares the value of selected severity indicators before and after the implementation of an intervention on a road. Finally, a graphical user interface allows the accident locations to be visualized and accidents with specific characteristics to be highlighted. The system was evaluated on the data collected between 2009 and 2011 for the A15 motorway in Italy, connecting Parma to La Spezia.

  7. Online Social Support for Patients with Multiple Sclerosis: A Thematic Analysis of Messages Posted to a Virtual Support Community

    Directory of Open Access Journals (Sweden)

    Masoumeh Abbasi Shavazi

    2016-07-01

    Full Text Available Background: Currently with the emergence of the Internet, patients have an opportunity to exchange social support online. However, little attention has been devoted to different dimensions of online social support exchanged in virtual support communities for patients with multiple sclerosis (MS. Methods: To provide a rich insight, the aim of this qualitative study was to explore and categorize different dimensions of online social support in messages exchanged in a virtual support community for patients with MS. A total of 548 posted messages created during one year period were selected using purposive sampling to consider the maximum variation sampling. Prior-research-driven thematic analysis was then conducted. In this regard, we used the Cutruna and Suhr’s coding system. The messages that could not be categorized with the used coding system were thematically analyzed to explore new additional social support themes. Results: The results showed that various forms of social support including informational, emotional, network, esteem and tangible support were exchanged. Moreover, new additional social support themes including sharing personal experiences, sharing coping strategies and spiritual support emerged in this virtual support community. Conclusion: The wide range of online social support exchanged in the virtual support community can be regarded as a supplementary source of social support for patients with MS. Future researches can examine online social support more comprehensively considering additional social support themes emerging in the present study.

  8. Seismic analysis for the supporting member of the Westinghouse AP1000 steam generator

    International Nuclear Information System (INIS)

    Xu Yu; Huang Mei; Tian Li; Hou Zhousen

    2012-01-01

    In this paper, the seismic performance analysis for the Supporting member of is carried out under the combined loads, including dead weight, earthquake loads, by using response spectrum analysis method in ANSYS. The stress qualification is also carried out based on ASME-Ⅲ-NF code. The results show that the stress of the Supporting member meets the seismic requirements for equipment, and the deformation of structure is within the allowable limits. (authors)

  9. Health organizations providing and seeking social support: a Twitter-based content analysis.

    Science.gov (United States)

    Rui, Jian Raymond; Chen, Yixin; Damiano, Amanda

    2013-09-01

    Providing and seeking social support are important aspects of social exchange. New communication technologies, especially social network sites (SNSs), facilitate the process of support exchange. An increasing number of health organizations are using SNSs. However, how they provide and seek social support via SNSs has yet to garner academic attention. This study examined the types of social support provided and sought by health organizations on Twitter. A content analysis was conducted on 1,500 tweets sent by a random sample of 58 health organizations within 2 months. Findings indicate that providing informational and emotional support, as well as seeking instrumental support, were the main types of social support exchanged by health organizations through Twitter. This study provides a typology for studying social support exchanges by health organizations, and recommends strategies for health organizations regarding the effective use of Twitter.

  10. The BGO-OD experiment: data analysis in preparation for physics proposals

    Energy Technology Data Exchange (ETDEWEB)

    Jude, Thomas [Physikalisches Institut, University of Bonn, Bonn (Germany); Collaboration: BGO-OD-Collaboration

    2014-07-01

    The BGO-OD experiment at the ELSA accelerator facility, Bonn, consists of the highly segmented BGO calorimeter with a particle tracking magnetic spectrometer at forward angles. This allows the investigation of final states of mixed charge with nearly 4π acceptance, with very high precision at forward angles for charged particles. An extensive physics programme using an energy tagged bremsstrahlung photon beam is planned using this unique setup. This includes measurements of associated strangeness, vector meson and pseudoscaler meson photoproduction. The commissioning phase of the experiment is almost complete. This talk focuses on analysis of the commissioning data, which includes particle track reconstruction in the forward spectrometer and momentum reconstruction with the BGO calorimeter. Comparisons are made with simulated data, and analysis results relevant to the physics proposals are presented.

  11. Analysis of the new architecture proposal for the CMM control system

    International Nuclear Information System (INIS)

    Heikkilae, L.; Saarinen, H.; Aha, L.; Viinikainen, M.; Mattila, J.; Hahto, A.; Siuko, M.; Semeraro, L.

    2011-01-01

    While developing divertor remote handling maintenance systems at the Divertor Test Platform 2 facility, some risks and sensitivity points related to the Cassette Multifunctional Mover control system software were discovered and evaluated. The control system architecture has to simultaneously fulfill the demanding ITER remote handling requirements and to face new requirements being uncovered during the trials. Especially evolving non-functional requirements such as reliability and safety have an effect on the control system architecture as it is getting more mature. An evaluation of the implications from architectural decisions is necessary before implementation efforts, as an architecture left to develop without evaluation may lead to a dead end and therefore soaring development costs. After studying existing architecture analysis methods an analysis method was developed to gain confidence to carry out the proposed changes.

  12. WFIRST: User and mission support at ISOC - IPAC Science Operations Center

    Science.gov (United States)

    Akeson, Rachel; Armus, Lee; Bennett, Lee; Colbert, James; Helou, George; Kirkpatrick, J. Davy; Laine, Seppo; Meshkat, Tiffany; Paladini, Roberta; Ramirez, Solange; Wang, Yun; Xie, Joan; Yan, Lin

    2018-01-01

    The science center for WFIRST is distributed between the Goddard Space Flight Center, the Infrared Processing and Analysis Center (IPAC) and the Space Telescope Science Institute (STScI). The main functions of the IPAC Science Operations Center (ISOC) are:* Conduct the GO, archival and theory proposal submission and evaluation process* Support the coronagraph instrument, including observation planning, calibration and data processing pipeline, generation of data products, and user support* Microlensing survey data processing pipeline, generation of data products, and user support* Community engagement including conferences, workshops and general support of the WFIRST exoplanet communityWe will describe the components planned to support these functions and the community of WFIRST users.

  13. Analysis of costs for compliance with Federal Radiation Protection Guidance for Occupational Exposure. Volume 2: case study analysis of the impacts of proposed radiation protection guidance for workers

    International Nuclear Information System (INIS)

    1983-11-01

    This report contains the writeups of case studies conducted in support of an effort to estimate costs and economic impacts of proposed Federal Radiation Protection Guidance for Occupational Exposures. The purpose of the case studies was to develop background information on representative organizations necessary to determine the impact of the proposed guidelines on selected industries. This information was used, together with other data, to estimate the aggregate costs of compliance with the proposed guidelines. The cost estimates are contained in a companion report

  14. Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

    Science.gov (United States)

    Estes, Ronald H. (Editor)

    1993-01-01

    This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

  15. A Customizable Language Learning Support System Using Ontology-Driven Engine

    Science.gov (United States)

    Wang, Jingyun; Mendori, Takahiko; Xiong, Juan

    2013-01-01

    This paper proposes a framework for web-based language learning support systems designed to provide customizable pedagogical procedures based on the analysis of characteristics of both learner and course. This framework employs a course-centered ontology and a teaching method ontology as the foundation for the student model, which includes learner…

  16. The role of critical ethnic awareness and social support in the discrimination-depression relationship among Asian Americans: path analysis.

    Science.gov (United States)

    Kim, Isok

    2014-01-01

    This study used a path analytic technique to examine associations among critical ethnic awareness, racial discrimination, social support, and depressive symptoms. Using a convenience sample from online survey of Asian American adults (N = 405), the study tested 2 main hypotheses: First, based on the empowerment theory, critical ethnic awareness would be positively associated with racial discrimination experience; and second, based on the social support deterioration model, social support would partially mediate the relationship between racial discrimination and depressive symptoms. The result of the path analysis model showed that the proposed path model was a good fit based on global fit indices, χ²(2) = 4.70, p = .10; root mean square error of approximation = 0.06; comparative fit index = 0.97; Tucker-Lewis index = 0.92; and standardized root mean square residual = 0.03. The examinations of study hypotheses demonstrated that critical ethnic awareness was directly associated (b = .11, p Asian Americans. This study highlights the usefulness of the critical ethnic awareness concept as a way to better understand how Asian Americans might perceive and recognize racial discrimination experiences in relation to its mental health consequences.

  17. Content analysis and qualitative study of hemodialysis patients, family experience and perceived social support.

    Science.gov (United States)

    Aghakhani, Nader; Sharif, Farkhondeh; Molazem, Zahra; Habibzadeh, Hosein

    2014-03-01

    Various treatments such as hemodialysis prolong the life of chronic renal failure disease patients who must tolerate many physical, emotional, social and economic difficulties. Therefore, social support is considered as a vital area of investigation for such patients. In this qualitative research, a grounded theory approach was used and written as a content analysis form to study hemodialysis patients and family experience of perceived social support. Three nurses, 4 general practitioners, a specialist and two family members who participated were interviewed from April to September 2012 in Urmia, Iran. Interviews were guided to divulge the perception of changes in their lives, needs for social support for disease complications, and the type of treatment process. Purposive sampling continued up to data saturation. Data analysis was performed based on Strauss and Corbin Method. Constant comparison analysis was performed until data saturation. The research results are shown in 3 steps. In the first step, 113 categories and four main themes from 993 first codes were explored. Social support was explored based on the implications of five general themes including "Perceived Threats Caused by Disease Complications", "Searching for Social Support", "Accessible Social Support", "Beliefs and Values", and "Perceived Social Support". The core variable of our research is acceptance of the reality of the conditions caused by the disease. The research finalized our knowledge about patient problems regarding social support and revealed many problems of supporting patients by Health Team Members, family members and organizations. The findings suggest that individual aspects of patient experiences must be considered if social support is to be given and Healthcare Providers have to facilitate positive health services.

  18. STARS - Supportability Trend Analysis and Reporting System for the National Space Transportation System

    Science.gov (United States)

    Graham, Leroy J.; Doempke, Gerald T.

    1990-01-01

    The concept, implementation, and long-range goals of a Supportability Trend Analysis and Reporting System (STARS) for the National Space Transportation System (NSTS) are discussed. The requirement was established as a direct result of the recommendations of the Rogers Commission investigation of the circumstances of the Space Shuttle Challenger accident. STARS outlines the requirements for the supportability-trend data collection, analysis, and reporting requirements that each of the project offices supporting the Space Shuttle are required to provide to the NSTS program office. STARS data give the historic and predictive logistics information necessary for all levels of NSTS management to make safe and cost-effective decisions concerning the smooth flow of Space Shuttle turnaround.

  19. Analysis of hydraulic gradients across the host rock at the proposed Texas Panhandle nuclear-waste repository site

    International Nuclear Information System (INIS)

    Bair, E.S.

    1987-01-01

    Analysis of the direction of ground-water flow across the host rock at the proposed high-level nuclear-waste repository site in Deaf Smith County, Texas, is complicated by vertical and lateral changes in the density of formation fluids in the various hydrogeologic units that overlie and underlie the proposed host rock. Because the concept of hydraulic head is not valid when evaluating vertical hydraulic gradients in a variably-density flow system, other methods were used to determine the direction and magnitude of vertical hydraulic gradients at the proposed site where the specific gravity of formation fluids varies between 1.00 and 1.28. The direction of ground-water flow across the proposed host rock, an 80-foot-thick salt bed in the Lower San Andres Formation, was determined by calculating vertical hydraulic gradients based on formation pressure and fluid density data, and by analysis of pressure-depth diagrams. Based on data from the vicinity of the proposed site, both methods indicate the potential for downflow across the host rock. Downflow or predominantly horizontal flow is considered a favorable prewaste emplacement condition because it prolongs the travel time to the biosphere of any naturally or accidentally released radionuclides

  20. A Quantitative Analysis of the Extrinsic and Intrinsic Turnover Factors of Relational Database Support Professionals

    Science.gov (United States)

    Takusi, Gabriel Samuto

    2010-01-01

    This quantitative analysis explored the intrinsic and extrinsic turnover factors of relational database support specialists. Two hundred and nine relational database support specialists were surveyed for this research. The research was conducted based on Hackman and Oldham's (1980) Job Diagnostic Survey. Regression analysis and a univariate ANOVA…

  1. A Proposal on the Quantitative Homogeneity Analysis Method of SEM Images for Material Inspections

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Song Hyun; Kim, Jong Woo; Shin, Chang Ho [Hanyang University, Seoul (Korea, Republic of); Choi, Jung-Hoon; Cho, In-Hak; Park, Hwan Seo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    A scanning electron microscope (SEM) is a method to inspect the surface microstructure of materials. The SEM uses electron beams for imaging high magnifications of material surfaces; therefore, various chemical analyses can be performed from the SEM images. Therefore, it is widely used for the material inspection, chemical characteristic analysis, and biological analysis. For the nuclear criticality analysis field, it is an important parameter to check the homogeneity of the compound material for using it in the nuclear system. In our previous study, the SEM was tried to use for the homogeneity analysis of the materials. In this study, a quantitative homogeneity analysis method of SEM images is proposed for the material inspections. The method is based on the stochastic analysis method with the information of the grayscales of the SEM images.

  2. A Proposal on the Quantitative Homogeneity Analysis Method of SEM Images for Material Inspections

    International Nuclear Information System (INIS)

    Kim, Song Hyun; Kim, Jong Woo; Shin, Chang Ho; Choi, Jung-Hoon; Cho, In-Hak; Park, Hwan Seo

    2015-01-01

    A scanning electron microscope (SEM) is a method to inspect the surface microstructure of materials. The SEM uses electron beams for imaging high magnifications of material surfaces; therefore, various chemical analyses can be performed from the SEM images. Therefore, it is widely used for the material inspection, chemical characteristic analysis, and biological analysis. For the nuclear criticality analysis field, it is an important parameter to check the homogeneity of the compound material for using it in the nuclear system. In our previous study, the SEM was tried to use for the homogeneity analysis of the materials. In this study, a quantitative homogeneity analysis method of SEM images is proposed for the material inspections. The method is based on the stochastic analysis method with the information of the grayscales of the SEM images

  3. Development of design and safety analysis supporting system for casks

    International Nuclear Information System (INIS)

    Ohsono, Katsunari; Higashino, Akira; Endoh, Shuji

    1993-01-01

    Mitsubishi heavy Industries has developed a design and safety analysis supporting system 'CADDIE' (Cask Computer Aided Design, Drawing and Integrated Evaluation System), with the following objectives: (1) Enhancement of efficiency of the design and safety analysis (2) Further advancement of design quality (3) Response to the diversification of design requirements. The features of this system are as follows: (1) The analysis model data common to analyses is established, and it is prepared automatically from the model made by CAD. (2) The input data for the analysis code is available by simple operation of conversation type from the analysis model data. (3) The analysis results are drawn out in diagrams by output generator, so as to facilitate easy observation. (4) The data of material properties, fuel assembly data, etc. required for the analyses are made available as a data base. (J.P.N.)

  4. Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project. [Assessment of post-closure performance for a proposed repository for high-level nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Roberds, W.J.; Plum, R.J.; Visca, P.J.

    1984-11-01

    This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab.

  5. Proposal of Constraints Analysis Method Based on Network Model for Task Planning

    Science.gov (United States)

    Tomiyama, Tomoe; Sato, Tatsuhiro; Morita, Toyohisa; Sasaki, Toshiro

    Deregulation has been accelerating several activities toward reengineering business processes, such as railway through service and modal shift in logistics. Making those activities successful, business entities have to regulate new business rules or know-how (we call them ‘constraints’). According to the new constraints, they need to manage business resources such as instruments, materials, workers and so on. In this paper, we propose a constraint analysis method to define constraints for task planning of the new business processes. To visualize each constraint's influence on planning, we propose a network model which represents allocation relations between tasks and resources. The network can also represent task ordering relations and resource grouping relations. The proposed method formalizes the way of defining constraints manually as repeatedly checking the network structure and finding conflicts between constraints. Being applied to crew scheduling problems shows that the method can adequately represent and define constraints of some task planning problems with the following fundamental features, (1) specifying work pattern to some resources, (2) restricting the number of resources for some works, (3) requiring multiple resources for some works, (4) prior allocation of some resources to some works and (5) considering the workload balance between resources.

  6. Control-group feature normalization for multivariate pattern analysis of structural MRI data using the support vector machine.

    Science.gov (United States)

    Linn, Kristin A; Gaonkar, Bilwaj; Satterthwaite, Theodore D; Doshi, Jimit; Davatzikos, Christos; Shinohara, Russell T

    2016-05-15

    Normalization of feature vector values is a common practice in machine learning. Generally, each feature value is standardized to the unit hypercube or by normalizing to zero mean and unit variance. Classification decisions based on support vector machines (SVMs) or by other methods are sensitive to the specific normalization used on the features. In the context of multivariate pattern analysis using neuroimaging data, standardization effectively up- and down-weights features based on their individual variability. Since the standard approach uses the entire data set to guide the normalization, it utilizes the total variability of these features. This total variation is inevitably dependent on the amount of marginal separation between groups. Thus, such a normalization may attenuate the separability of the data in high dimensional space. In this work we propose an alternate approach that uses an estimate of the control-group standard deviation to normalize features before training. We study our proposed approach in the context of group classification using structural MRI data. We show that control-based normalization leads to better reproducibility of estimated multivariate disease patterns and improves the classifier performance in many cases. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Positive Behavior Support and Applied Behavior Analysis: A Familial Alliance

    Science.gov (United States)

    Dunlap, Glen; Carr, Edward G.; Horner, Robert H.; Zarcone, Jennifer R.; Schwartz, Ilene

    2008-01-01

    Positive behavior support (PBS) emerged in the mid-1980s as an approach for understanding and addressing problem behaviors. PBS was derived primarily from applied behavior analysis (ABA). Over time, however, PBS research and practice has incorporated evaluative methods, assessment and intervention procedures, and conceptual perspectives associated…

  8. 75 FR 37806 - Twitter, Inc.; Analysis of Proposed Consent Order to Aid Public Comment

    Science.gov (United States)

    2010-06-30

    ... FEDERAL TRADE COMMISSION [File No. 092 3093] Twitter, Inc.; Analysis of Proposed Consent Order to... in paper form. Comments should refer to``Twitter, Inc., File No. 092 3093'' to facilitate the... weblink: ( http://public.commentworks.com/ftc/twitter ) and following the instructions on the web-based...

  9. The Statistical Analysis Techniques to Support the NGNP Fuel Performance Experiments

    International Nuclear Information System (INIS)

    Pham, Bihn T.; Einerson, Jeffrey J.

    2010-01-01

    This paper describes the development and application of statistical analysis techniques to support the AGR experimental program on NGNP fuel performance. The experiments conducted in the Idaho National Laboratory's Advanced Test Reactor employ fuel compacts placed in a graphite cylinder shrouded by a steel capsule. The tests are instrumented with thermocouples embedded in graphite blocks and the target quantity (fuel/graphite temperature) is regulated by the He-Ne gas mixture that fills the gap volume. Three techniques for statistical analysis, namely control charting, correlation analysis, and regression analysis, are implemented in the SAS-based NGNP Data Management and Analysis System (NDMAS) for automated processing and qualification of the AGR measured data. The NDMAS also stores daily neutronic (power) and thermal (heat transfer) code simulation results along with the measurement data, allowing for their combined use and comparative scrutiny. The ultimate objective of this work includes (a) a multi-faceted system for data monitoring and data accuracy testing, (b) identification of possible modes of diagnostics deterioration and changes in experimental conditions, (c) qualification of data for use in code validation, and (d) identification and use of data trends to support effective control of test conditions with respect to the test target. Analysis results and examples given in the paper show the three statistical analysis techniques providing a complementary capability to warn of thermocouple failures. It also suggests that the regression analysis models relating calculated fuel temperatures and thermocouple readings can enable online regulation of experimental parameters (i.e. gas mixture content), to effectively maintain the target quantity (fuel temperature) within a given range.

  10. The statistical analysis techniques to support the NGNP fuel performance experiments

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Binh T., E-mail: Binh.Pham@inl.gov; Einerson, Jeffrey J.

    2013-10-15

    This paper describes the development and application of statistical analysis techniques to support the Advanced Gas Reactor (AGR) experimental program on Next Generation Nuclear Plant (NGNP) fuel performance. The experiments conducted in the Idaho National Laboratory’s Advanced Test Reactor employ fuel compacts placed in a graphite cylinder shrouded by a steel capsule. The tests are instrumented with thermocouples embedded in graphite blocks and the target quantity (fuel temperature) is regulated by the He–Ne gas mixture that fills the gap volume. Three techniques for statistical analysis, namely control charting, correlation analysis, and regression analysis, are implemented in the NGNP Data Management and Analysis System for automated processing and qualification of the AGR measured data. The neutronic and thermal code simulation results are used for comparative scrutiny. The ultimate objective of this work includes (a) a multi-faceted system for data monitoring and data accuracy testing, (b) identification of possible modes of diagnostics deterioration and changes in experimental conditions, (c) qualification of data for use in code validation, and (d) identification and use of data trends to support effective control of test conditions with respect to the test target. Analysis results and examples given in the paper show the three statistical analysis techniques providing a complementary capability to warn of thermocouple failures. It also suggests that the regression analysis models relating calculated fuel temperatures and thermocouple readings can enable online regulation of experimental parameters (i.e. gas mixture content), to effectively maintain the fuel temperature within a given range.

  11. Ecologic and Morphologic Analysis of a Proposed Network of Sediment Diversions

    Science.gov (United States)

    Meselhe, E. A.; Sadid, K. M.; Jung, H.; Messina, F.; Esposito, C.; Liang, M.

    2017-12-01

    Deltaic processes are governed by factors including the characteristics of inflowing sediment (e.g., temporal variability of the load and size class distribution), receiving basins (e.g., water depth, tidal range, circulation pattern, and wind field), and substrate (e.g., sediment type and soil strength). These factors influence the deltaic growth as well as the size and pattern of channel bifurcations. This topic is of importance to deltas experiencing land loss due to subsidence and sea level rise. The Mississippi River Delta is an example where a number of sediment diversions are being considered in conjunction with other restoration actions to minimize loss of wetlands. Historically, the Mississippi River played a significant role in providing sediment, nutrients, and fresh water to support Louisiana's coastal wetland system. As such, a systems perspective for regional-scale implementation of diversions is important. Field observations coupled with numerical modeling at various temporal and spatial scales, has provided insights toward a system-scale approach to design, evaluate and operate sediment diversions. These research activities investigate the uncertainties associated with morphodynamic processes both on the river and receiving basin sides and identify parameters influencing the magnitude and rate of building new land and sustaining existing wetland areas. Specifically, this presentation discusses the impact of extracting sediment and water from fluvial rivers, the ability to convey (and retain) sediment to the receiving basins. In addition to delivering sediment to receiving basins, some proposed sediment diversions could discharge high volumes of nutrient-rich fresh water into existing wetlands and bays. A goal of the analysis presented here is to improve our understanding of morphodynamic responses of the receiving basins and the ecosystem effects of discharges of freshwater and nutrients at this scale.

  12. 76 FR 28043 - Proposed Information Collection Activity; Comment Request

    Science.gov (United States)

    2011-05-13

    ... Support Enforcement (OCSE) in monitoring and evaluating State Child Support programs. OCSE is proposing... coverage plans, and cash medical support. Further legislative or regulatory changes may be necessary to...

  13. Analysis of axial compressive loaded beam under random support excitations

    Science.gov (United States)

    Xiao, Wensheng; Wang, Fengde; Liu, Jian

    2017-12-01

    An analytical procedure to investigate the response spectrum of a uniform Bernoulli-Euler beam with axial compressive load subjected to random support excitations is implemented based on the Mindlin-Goodman method and the mode superposition method in the frequency domain. The random response spectrum of the simply supported beam subjected to white noise excitation and to Pierson-Moskowitz spectrum excitation is investigated, and the characteristics of the response spectrum are further explored. Moreover, the effect of axial compressive load is studied and a method to determine the axial load is proposed. The research results show that the response spectrum mainly consists of the beam's additional displacement response spectrum when the excitation is white noise; however, the quasi-static displacement response spectrum is the main component when the excitation is the Pierson-Moskowitz spectrum. Under white noise excitation, the amplitude of the power spectral density function decreased as the axial compressive load increased, while the frequency band of the vibration response spectrum increased with the increase of axial compressive load.

  14. 48 CFR 815.404-2 - Information to support proposal analysis.

    Science.gov (United States)

    2010-10-01

    ... VETERANS AFFAIRS CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 815.404... pricing action. The contracting officer must ensure, with the assistance of the Assistant Inspector General for Policy, Planning, and Resources, as required or considered necessary, that VA will not pay the...

  15. 48 CFR 1415.404-2 - Information to support proposal analysis.

    Science.gov (United States)

    2010-10-01

    ... shall allow at least 30 working days in assigning a realistic deadline for receipt of the audit report... in the contract file. (b) Upon receipt of a DI-1902, the OIG will conduct the audit or arrange for its conduct by the cognizant audit agency in accordance with 360 DM 3.7. (c) Upon receipt of the audit...

  16. 48 CFR 15.404-2 - Data to support proposal analysis.

    Science.gov (United States)

    2010-10-01

    ... pricing assistance is generally available to provide— (i) Technical, audit, and special reports associated.... Early communication with these experts will assist in determining the extent of assistance required, the... and audit reports, the contracting officer shall request that the audit agency concurrently forward...

  17. TSUNAMI analysis of the applicability of proposed experiments to reactor-grade and weapons-grade mixed-oxide systems

    International Nuclear Information System (INIS)

    Rearden, Bradley T.; Hopper, Calvin M.; Elam, Karla R.

    2005-01-01

    The applicability of proposed critical experiments for the criticality code validation of a series of prototypic reactor-grade and weapons-grade mixed-oxide systems has been assessed with the TSUNAMI methodology from SCALE 5. The application systems were proposed by the Nuclear Energy Agency (NEA) Organization for Economic Cooperation and Development (OECD) Working Party on Nuclear Criticality Safety MOX Experimental Needs Working Group. Forty-eight application systems were conceived to envelope the range of conditions in processing and fabrication of reactor-grade and weapons-grade MOX fuel. The applicability of 303 existing critical benchmarks to each of the 48 applications was assessed, and validation coverage was found to be lacking for certain applications. Two series of proposed critical experiments were also considered in this analysis. The TSUNAMI analysis has revealed that both series of proposed experiments are applicable to numerous configurations of the reactor-grade and weapons-grade systems. A detailed assessment of which experiments were revealed by TSUNAMI to be most applicable to specific prototypic fuel processing systems has been performed. (author)

  18. Stress analysis of LOFT containment vessel attachments for the mainsteam and feedwater piping support structures

    International Nuclear Information System (INIS)

    Finicle, D.P.

    1977-01-01

    The LOFT Containment Vessel attachments for the Mainsteam and Feedwater Piping Support Structures have been analyzed for operating and faulted loading conditions. This report contains the analysis of the connections to the containment vessel for the most current design and loading. Also contained in this report is the analysis of the piping supports

  19. A Proposal on the Advanced Sampling Based Sensitivity and Uncertainty Analysis Method for the Eigenvalue Uncertainty Analysis

    International Nuclear Information System (INIS)

    Kim, Song Hyun; Song, Myung Sub; Shin, Chang Ho; Noh, Jae Man

    2014-01-01

    In using the perturbation theory, the uncertainty of the response can be estimated by a single transport simulation, and therefore it requires small computational load. However, it has a disadvantage that the computation methodology must be modified whenever estimating different response type such as multiplication factor, flux, or power distribution. Hence, it is suitable for analyzing few responses with lots of perturbed parameters. Statistical approach is a sampling based method which uses randomly sampled cross sections from covariance data for analyzing the uncertainty of the response. XSUSA is a code based on the statistical approach. The cross sections are only modified with the sampling based method; thus, general transport codes can be directly utilized for the S/U analysis without any code modifications. However, to calculate the uncertainty distribution from the result, code simulation should be enough repeated with randomly sampled cross sections. Therefore, this inefficiency is known as a disadvantage of the stochastic method. In this study, an advanced sampling method of the cross sections is proposed and verified to increase the estimation efficiency of the sampling based method. In this study, to increase the estimation efficiency of the sampling based S/U method, an advanced sampling and estimation method was proposed. The main feature of the proposed method is that the cross section averaged from each single sampled cross section is used. For the use of the proposed method, the validation was performed using the perturbation theory

  20. Validation of spectral methods for the seismic analysis of multi-supported structures

    International Nuclear Information System (INIS)

    Viola, B.

    1999-01-01

    There are many methodologies for the seismic analysis of buildings. When a seism occurs, structures such piping systems in nuclear power plants are subjected to motions that may be different at each support point. Therefore it is necessary to develop methods that take into account the multi-supported effect. In a first time, a bibliography analysis on the different methods that exist has been carried out. The aim was to find a particular method applicable to the study of piping systems. The second step of this work consisted in developing a program that may be used to test and make comparisons on different selected methods. So spectral methods have the advantage to give an estimation of the maximum values for strain in the structure, in reduced calculation time. The time history analysis is used as the reference for the tests. (author)

  1. 76 FR 15054 - Proposed Information Collection (Supporting Statement Regarding Marriage); Comment Request

    Science.gov (United States)

    2011-03-18

    ... (Supporting Statement Regarding Marriage); Comment Request AGENCY: Veterans Benefits Administration... eligibility for benefits based on a common law marriage. DATES: Written comments and recommendations on the... use of other forms of information technology. Title: Supporting Statement Regarding Marriage, VA Form...

  2. Review comments on Environmental Analysis Cost Reduction Proposals (WIPP-DOE-136), July 1982

    International Nuclear Information System (INIS)

    Channell, J.K.

    1982-11-01

    The cost reduction proposals have the laudable goal of significantly reducing the total capital And operating cost connected with WIPP. Furthermore, since the proposed changes would reduce the size and operating rate of the project, they would be expected to have decreased environmental And socioeconomic impacts. However, some of these cost reduction proposals do decrease factors of safety in various components of the project or trade off one type of environmental detriment for another. The report does not contain sufficient detail to justify all of the conclusions reached; more discussion and quantitative information (including costs) is necessary in some cases. Also, there are places where the report is unclear or contradictory. Without a more detailed evaluation, EEG is unable to conclude that each of these cost reduction proposals either has a net environmental/health and safety benefit or a cost savings that justifies a net detriment. A revised Environmental Analysis (EA) should either include additional information or specifically reference backup documents where these conclusions have been justified. In addition, the EA needs to be revised to include the effect of the recently announced (11/18/82) decision by DOE to relocate the underground waste storage areas of the repository to the south

  3. Design assessment of triangular support bracket for manufacturability

    International Nuclear Information System (INIS)

    Kim, Yu-Gyeong; Jung, Yung-Jin; Kim, Hyun-Soo; Ahn, Hee-Jae

    2015-01-01

    Highlights: • Various designs for ITER triangular support bracket are proposed in terms of efficient manufacturability. • An optimized design for structural safety is determined in accordance with RCC-MR. • This result is reconfirmed by cross-checking in comparison with the IO baseline of integrity. - Abstract: The triangular support is connected structurally and hydraulically with the inner shell of the vacuum vessel and its main role is to keep plasma vertical stability during operational disruptions. Korea is responsible for the procurement of sectors 1 and 6 of the main vessel including triangular support. At present, design review for its fabrication by ITER Korea and Hyundai Heavy Industries, Co., Ltd. is in progress. This paper presents the results on various designs for triangular support bracket in terms of manufacturability considering both easiness of non-destructive evaluation and fabrication efficiency. The several designs are proposed and evaluated under the most critical loading condition using elastic and limit analysis with fatigue evaluation. Consequently, an optimized design for structural safety is determined in accordance with RCC-MR. This result is reconfirmed by cross-checking in comparison with the baseline of integrity that already had been determined by ITER Organization. The design deviation requests of triangular support bracket have been submitted to ITER Organization and Agreed Notified Body for approval, and their verification is currently under discussion.

  4. Design and Analysis of Muon Beam Stop Support Structures

    Energy Technology Data Exchange (ETDEWEB)

    Okafor, Udenna [Northern Illinois Univ., DeKalb, IL (United States)

    2015-01-01

    The primary objective of this thesis is to design and analyze support structures to be used in the installation, test and final positioning of the MBS throughout the life of the Mu2e experiment. There several requirements for the MBS imposed by both the scope of the experiment and, other components within the DS bore. The functions of the MBS are: 1. To limit the induced rates in the Tracker, the Calorimeter and the Cosmic Ray Veto due to backsplash-and-secondary interactions, and 2. To reduce radiation levels external to the Detector solenoid. The structures used in supporting the MBS will also adhere to requirements imposed by its functions. These requirements are critical to the support structures and affect design decisions. Other requirements critical to the design are imposed by the weight, positional tolerance and assembly procedure of the MBS, and also, the magnetic field and vacuum dose rate of the DS bore. A detailed breakdown of how each requirement affects the structural design can be found in chapter 2. Chapter 3 describes the design of each support structure and its attachment to the MBS while chapter 4 describes the results from structural analysis of the support structures. Chapter 5 describes evaluation for the design through testing and calculations while the conclusion in chapter 6 reports the current status at the time of this thesis submission with a plan for future work to be completed until final design and installation.

  5. Computational Support for Creative Design

    KAUST Repository

    Liu, Han

    2015-12-09

    Supporting user designs of 3D contents remains a challenge in geometric modeling. Various modeling tools have been developed in recent years to facilitate architectural designs and artistic creations. However, these tools require both modeling skills and raw creativity. Instead of creating models from scratch, one of the most popular choices is to extract intrinsic patterns from exemplar inputs (e.g., shape collections and sketches), to produce creative models while preserving the patterns. The mod- eling process contains two main stages, analysis and synthesis. The analysis of input models is usually performed at component level, especially for man-made objects that can be decomposed into several semantic parts, for example, the seat and handles of a bicycle. The synthesis stage recombines parts of shapes to generate new models that usually have topological or geometric variations. In this thesis, we propose three design tools aimed at easing the modeling process. We focus on man-made objects and scenes such as buildings and furniture, as the functionality of such shapes can be analyzed at the component level. A relation graph, which is commonly used in shape analysis, can then be built to represent the input shapes. In our work, the graph nodes denote the elements of a model (i.e., rooms, shape parts, and strokes respectively), while the edges capture the intrinsic relations between connected elements. With the use of graph representations, we extract and present controllable components to users for supporting their designs. The emphasis of our work is on three aspects. Firstly, we propose a framework for supporting interior layout design, which allows users to manipulate the produced floor plans, i.e., changing the scales of rooms and their positions as well. When the user modifies the topology of a layout, the corresponding layout graph is updated and the room geometries are optimized under certain constraints, e.g., user specified scales, the adjacency of

  6. An analysis of the NIH-supported sickle cell disease research portfolio.

    Science.gov (United States)

    Gavini, Nara; Hoots, W Keith; Mensah, George A; Hanspal, Manjit

    2015-02-01

    Sickle cell disease (SCD), an inherited blood disorder is due to a single amino acid substitution on the beta chain of hemoglobin, and is characterized by anemia, severe infections, acute and chronic pain, and multi-organ damage. The National Institutes of Health (NIH) is dedicated to support basic, translational and clinical science research to improve care and ultimately, to find a cure for SCD that causes such suffering. This report provides a detailed analysis of grants funded by the NIH for SCD research in Fiscal Years 2007 through 2013. During this period, the NIH supported 247 de novo grants totaling $272,210,367 that address various aspects of SCD. 83% of these funds supported research project grants investigating the following 5 scientific themes: Pathology of Sickle Red Blood Cells; Globin Gene Expression; Adhesion and Vascular Dysfunction; Neurological Complications and Organ-specific Dysfunction; and Pain Management and Intervention. The remaining 17% of total funds supported career development and training grants; Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) grants; large Center grants; and Conference grants. Further analysis showed that the National Heart, Lung, and Blood Institute (NHLBI) is the largest funder of SCD research within NIH with 67% of total grants, contributing 77% of total funds; followed by the National Institute for Digestive Diseases and Kidney (NIDDK) that is funding 19% of grants, contributing 13% of total funds. The remaining 14% of grants totaling 10% of the funds were supported by all other NIH Institutes/Centers (ICs) combined. In summary, the NIH is using multiple funding mechanisms to support a sickle cell disease research agenda that is intended to advance the detection, treatment, and cure of this debilitating genetic disease. Published by Elsevier Inc.

  7. Oil-spill risk analysis: Gulf of Mexico (Proposed Lease Sales 131/135/137) Outer Continental Shelf. Final report

    International Nuclear Information System (INIS)

    Hannon, L.J.; LaBelle, R.P.; Lear, E.M.

    1991-09-01

    The Federal Government has proposed to offer Outer Continental Shelf lands in the Gulf of Mexico for oil and gas leasing. Because oil spills may occur from activities associated with offshore oil production, the Minerals Management Service conducts a formal risk assessment. In evaluating the significance of accidental oil spills, it is important to remember that the occurrence of such spills is fundamentally probabilistic. The effects of oil spills that could occur during oil and gas production must be considered. The report summarizes results of an oil spill risk analysis conducted for the proposed Gulf of Mexico Outer Continental Shelf Lease Sales 131/135/137. The objective of this analysis was to estimate relative risks associated with oil and gas production for the proposed lease sales

  8. A Transcriptome Meta-Analysis Proposes Novel Biological Roles for the Antifungal Protein AnAFP in Aspergillus niger.

    Directory of Open Access Journals (Sweden)

    Norman Paege

    Full Text Available Understanding the genetic, molecular and evolutionary basis of cysteine-stabilized antifungal proteins (AFPs from fungi is important for understanding whether their function is mainly defensive or associated with fungal growth and development. In the current study, a transcriptome meta-analysis of the Aspergillus niger γ-core protein AnAFP was performed to explore co-expressed genes and pathways, based on independent expression profiling microarrays covering 155 distinct cultivation conditions. This analysis uncovered that anafp displays a highly coordinated temporal and spatial transcriptional profile which is concomitant with key nutritional and developmental processes. Its expression profile coincides with early starvation response and parallels with genes involved in nutrient mobilization and autophagy. Using fluorescence- and luciferase reporter strains we demonstrated that the anafp promoter is active in highly vacuolated compartments and foraging hyphal cells during carbon starvation with CreA and FlbA, but not BrlA, as most likely regulators of anafp. A co-expression network analysis supported by luciferase-based reporter assays uncovered that anafp expression is embedded in several cellular processes including allorecognition, osmotic and oxidative stress survival, development, secondary metabolism and autophagy, and predicted StuA and VelC as additional regulators. The transcriptomic resources available for A. niger provide unparalleled resources to investigate the function of proteins. Our work illustrates how transcriptomic meta-analyses can lead to hypotheses regarding protein function and predict a role for AnAFP during slow growth, allorecognition, asexual development and nutrient recycling of A. niger and propose that it interacts with the autophagic machinery to enable these processes.

  9. A Transcriptome Meta-Analysis Proposes Novel Biological Roles for the Antifungal Protein AnAFP in Aspergillus niger.

    Science.gov (United States)

    Paege, Norman; Jung, Sascha; Schäpe, Paul; Müller-Hagen, Dirk; Ouedraogo, Jean-Paul; Heiderich, Caroline; Jedamzick, Johanna; Nitsche, Benjamin M; van den Hondel, Cees A; Ram, Arthur F; Meyer, Vera

    2016-01-01

    Understanding the genetic, molecular and evolutionary basis of cysteine-stabilized antifungal proteins (AFPs) from fungi is important for understanding whether their function is mainly defensive or associated with fungal growth and development. In the current study, a transcriptome meta-analysis of the Aspergillus niger γ-core protein AnAFP was performed to explore co-expressed genes and pathways, based on independent expression profiling microarrays covering 155 distinct cultivation conditions. This analysis uncovered that anafp displays a highly coordinated temporal and spatial transcriptional profile which is concomitant with key nutritional and developmental processes. Its expression profile coincides with early starvation response and parallels with genes involved in nutrient mobilization and autophagy. Using fluorescence- and luciferase reporter strains we demonstrated that the anafp promoter is active in highly vacuolated compartments and foraging hyphal cells during carbon starvation with CreA and FlbA, but not BrlA, as most likely regulators of anafp. A co-expression network analysis supported by luciferase-based reporter assays uncovered that anafp expression is embedded in several cellular processes including allorecognition, osmotic and oxidative stress survival, development, secondary metabolism and autophagy, and predicted StuA and VelC as additional regulators. The transcriptomic resources available for A. niger provide unparalleled resources to investigate the function of proteins. Our work illustrates how transcriptomic meta-analyses can lead to hypotheses regarding protein function and predict a role for AnAFP during slow growth, allorecognition, asexual development and nutrient recycling of A. niger and propose that it interacts with the autophagic machinery to enable these processes.

  10. Application of Workflow Technology for Big Data Analysis Service

    Directory of Open Access Journals (Sweden)

    Bin Zhang

    2018-04-01

    Full Text Available This study presents a lightweight representational state transfer-based cloud workflow system to construct a big data intelligent software-as-a-service (SaaS platform. The system supports the dynamic construction and operation of an intelligent data analysis application, and realizes rapid development and flexible deployment of the business analysis process that can improve the interaction and response time of the process. The proposed system integrates offline-batch and online-streaming analysis models that allow users to conduct batch and streaming computing simultaneously. Users can rend cloud capabilities and customize a set of big data analysis applications in the form of workflow processes. This study elucidates the architecture and application modeling, customization, dynamic construction, and scheduling of a cloud workflow system. A chain workflow foundation mechanism is proposed to combine several analysis components into a chain component that can promote efficiency. Four practical application cases are provided to verify the analysis capability of the system. Experimental results show that the proposed system can support multiple users in accessing the system concurrently and effectively uses data analysis algorithms. The proposed SaaS workflow system has been used in network operators and has achieved good results.

  11. Interaction Analysis for Supporting Students' Self-Regulation during Blog-Based CSCL Activities

    Science.gov (United States)

    Michailidis, Nikolaos; Kapravelos, Efstathios; Tsiatsos, Thrasyvoulos

    2018-01-01

    Self-regulated learning is an important means of supporting students' self-awareness and self-regulation level so as to enhance their motivation and engagement. Interaction Analysis (IA) contributes to this end, and its use in studying learning dynamics involved in asynchronous Computer-Supported Collaborative Learning (CSCL) activities has…

  12. Decision support for farmers in Africa: Analysis of the roles and ...

    African Journals Online (AJOL)

    Decision support for farmers in Africa: Analysis of the roles and ... producers to access more consumable, accurate and timely information for making informed choices. ... To capitalise on 'big data', the sub-Saharan African grain industry needs ...

  13. Developing SASSA: a Soil Analysis Support System for Archaeologists

    Directory of Open Access Journals (Sweden)

    Clare Wilson

    2008-12-01

    Full Text Available There is constant pressure on field archaeologists to be familiar with the core concepts of a diverse range of specialist disciplines. Soils and sediments are an integral part of archaeological sites, and soil and sedimentary analyses applied to archaeological questions are now recognised as an important branch of geoarchaeology. However, the teaching of soils in archaeology degrees is variable and many archaeologists complain they lack the confidence and skills to describe and interpret properly the deposits they excavate. SASSA (Soil Analysis Support System for Archaeologists is a free-to-use, internet-based system designed to familiarise archaeologists with the concepts and possibilities offered by the scientific study of soils and sediments associated with archaeological sites. The aims of SASSA are: ◦To provide soils training specifically for archaeologists, suitable for either a university or workplace setting. ◦To provide a freely accessible soils and archaeology knowledge base for archaeologists working in either the office or the field. ◦To support archaeologists describing and interpreting soils in the field. ◦To enhance understanding of the types of archaeological questions that soil analysis can help to address. ◦To initiate dialogue between archaeologists, geoarchaeologists, and soil scientists in order to encourage the thoughtful application of soil analyses to archaeological questions. SASSA consists of two core components: a knowledge base and a field tool. The 'front-end' of the website is the knowledge base; this uses wiki technology to allow users to add their own content and encourage dialogue between archaeologists and geoarchaeologists. The field tool uses an XML data structure and decision-tree support system to guide the user through the process of describing and interpreting soils and sediments. SASSA is designed for use on both 'static' (PC and 'mobile' (PDA and laptop hardware in order to provide in situ

  14. The Relationship between Teacher Support and Students' Academic Emotions: A Meta-Analysis

    Directory of Open Access Journals (Sweden)

    Hao Lei

    2018-01-01

    Full Text Available This meta-analysis examines the association between teacher support and students' academic emotions [both positive academic emotions (PAEs and negative academic emotions (NAEs] and explores how student characteristics moderate these relationships. We identified 65 primary studies with 58,368 students. The results provided strong evidence linking teacher support and students' academic emotions. Furthermore, students' culture, age, and gender moderated these links. The correlation between teacher support and PAEs was stronger for Western European and American students than for East Asian students, while the correlation between teacher support and NAEs was stronger for East Asian students than for Western European and American students. Also, the correlation between teacher support and PAEs was strong among university students and weaker among middle school students, compared to other students. The correlation between teacher support and NAEs was stronger for middle school students and for female students, compared to other students.

  15. Life support systems analysis and technical trades for a lunar outpost

    Science.gov (United States)

    Ferrall, J. F.; Ganapathi, G. B.; Rohatgi, N. K.; Seshan, P. K.

    1994-01-01

    The NASA/JPL life support systems analysis (LISSA) software tool was used to perform life support system analysis and technology trades for a Lunar Outpost. The life support system was modeled using a chemical process simulation program on a steady-state, one-person, daily basis. Inputs to the LiSSA model include metabolic balance load data, hygiene load data, technology selection, process operational assumptions and mission parameter assumptions. A baseline set of technologies has been used against which comparisons have been made by running twenty-two cases with technology substitutions. System, subsystem, and technology weights and powers are compared for a crew of 4 and missions of 90 and 600 days. By assigning a weight value to power, equivalent system weights are compared. Several less-developed technologies show potential advantages over the baseline. Solid waste treatment technologies show weight and power disadvantages but one could have benefits associated with the reduction of hazardous wastes and very long missions. Technology development towards reducing the weight of resupplies and lighter materials of construction was recommended. It was also recommended that as technologies are funded for development, contractors should be required to generate and report data useful for quantitative technology comparisons.

  16. Risk-based decision analysis for groundwater operable units

    International Nuclear Information System (INIS)

    Chiaramonte, G.R.

    1995-01-01

    This document proposes a streamlined approach and methodology for performing risk assessment in support of interim remedial measure (IRM) decisions involving the remediation of contaminated groundwater on the Hanford Site. This methodology, referred to as ''risk-based decision analysis,'' also supports the specification of target cleanup volumes and provides a basis for design and operation of the groundwater remedies. The risk-based decision analysis can be completed within a short time frame and concisely documented. The risk-based decision analysis is more versatile than the qualitative risk assessment (QRA), because it not only supports the need for IRMs, but also provides criteria for defining the success of the IRMs and provides the risk-basis for decisions on final remedies. For these reasons, it is proposed that, for groundwater operable units, the risk-based decision analysis should replace the more elaborate, costly, and time-consuming QRA

  17. 76 FR 68189 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

    Science.gov (United States)

    2011-11-03

    ... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of... Technology Holdings, Inc. (``Healthcare Technology''), subject to final approval, an Agreement Containing... Healthcare Technology's proposed acquisition of SDI Health LLC (``SDI'') from SDI Health Holdings LLC (``SDI...

  18. Linguistic Error Analysis on Students' Thesis Proposals

    Science.gov (United States)

    Pescante-Malimas, Mary Ann; Samson, Sonrisa C.

    2017-01-01

    This study identified and analyzed the common linguistic errors encountered by Linguistics, Literature, and Advertising Arts majors in their Thesis Proposal classes in the First Semester 2016-2017. The data were the drafts of the thesis proposals of the students from the three different programs. A total of 32 manuscripts were analyzed which was…

  19. Stress analysis and fail-safe design of bilayered tubular supported ceramic membranes

    DEFF Research Database (Denmark)

    Kwok, Kawai; Frandsen, Henrik Lund; Søgaard, Martin

    2014-01-01

    . Stress distributions in two membrane systems have been analyzed and routes to minimize stress are proposed. For a Ba0.5Sr0.5Co0.8Fe0.2O3−δBa0.5Sr0.5Co0.8Fe0.2O3−δ membrane supported on a porous substrate of the same material under pressure-vacuum operation, the optimal configuration in terms...... for both membrane systems at operating conditions in the range of practical interest....

  20. A new composite decision support framework for strategic and sustainable transport appraisals

    DEFF Research Database (Denmark)

    Barfod, Michael Bruhn; Salling, Kim Bang

    2015-01-01

    . The proposed framework is based on the use of cost-benefit analysis featuring feasibility risk assessment in combination with multi-criteria decision analysis and is supported by the concept of decision conferencing. The framework is applied for a transport related case study dealing with the complex decision....... The outcome of the case study demonstrates the decision making framework as a valuable decision support system (DSS), and it is concluded that appraisals of transport projects can be effectively supported by the use of the DSS. Finally, perspectives of the future modelling work are given.......This paper concerns the development of a new decision support framework for the appraisal of transport infrastructure projects. In such appraisals there will often be a need for including both conventional transport impacts as well as criteria of a more strategic and/or sustainable character...

  1. Thematic Apperception Test: an original proposal for interaction analysis

    Directory of Open Access Journals (Sweden)

    Doriana Dipaola

    2015-12-01

    Full Text Available The TAT as projective technique gives the opportunity to explore the inner world and the intra-psychic functioning, as well as the objectual representations and the prevailing thinking processes. Our hypothesis is that the TAT could also be deployed as a valid tool in the analysis of inter-personal functioning, specifically within the couple. From this assumption originates our proposal for an original methodology of TAT deployment and reading, which integrates the classical individual TAT methodology with the Common Rorschach method suggested by Willi. The goal is to experiment a parallel utilisation of the test that could contribute to the understanding of personalities and of how these intertwine in couple interaction. “In the relationship with the partner, the personality takes new shapes, given personality and character traits are strengthened, while others lose importance”, (Theodore Lidz, in Willi, 1990. The couple TAT presupposes a sequence of pictures proposed following procedures identical to the Common Rorschach ones to the single individuals at first and then to the couple. From the initial individual task follows the one of building a commonly shared history starting from the stimulus. The suggested methodology shall be exemplified through the presentation of clinical cases belonging to the research sample. The comprehension of the inter-personal dynamic, in a common task, could allow to explore the ways in which conflict expresses itself, the roles and prospects for collaboration, the “generativity” of the couple and the management of affects and anxieties in the interaction and could be successfully deployed as a tool in the context of couple counselling.

  2. Chord Recognition Based on Temporal Correlation Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Zhongyang Rao

    2016-05-01

    Full Text Available In this paper, we propose a method called temporal correlation support vector machine (TCSVM for automatic major-minor chord recognition in audio music. We first use robust principal component analysis to separate the singing voice from the music to reduce the influence of the singing voice and consider the temporal correlations of the chord features. Using robust principal component analysis, we expect the low-rank component of the spectrogram matrix to contain the musical accompaniment and the sparse component to contain the vocal signals. Then, we extract a new logarithmic pitch class profile (LPCP feature called enhanced LPCP from the low-rank part. To exploit the temporal correlation among the LPCP features of chords, we propose an improved support vector machine algorithm called TCSVM. We perform this study using the MIREX’09 (Music Information Retrieval Evaluation eXchange Audio Chord Estimation dataset. Furthermore, we conduct comprehensive experiments using different pitch class profile feature vectors to examine the performance of TCSVM. The results of our method are comparable to the state-of-the-art methods that entered the MIREX in 2013 and 2014 for the MIREX’09 Audio Chord Estimation task dataset.

  3. Generalization of proposed tendon friction correlation and its application to PCCV structural analysis

    International Nuclear Information System (INIS)

    Kashiwase, Takako; Nagasaka, Hideo

    2000-01-01

    The present paper dealt with the extension of tendon friction coefficient correlation as a function of loading end load and circumferential angle, proposed in the former paper. The extended correlation further included the effects of the number of strands contacted with sheath, tendon diameter, politicization of tendon and tendon local curvature. The validity of the correlation was confirmed by several published measured data. The structural analysis of middle cylinder part of 1/4 PCCV (Prestressed Concrete Containment Vessel) model was conducted using the present friction coefficient correlation. The results were compared with the analysis using constant friction coefficient, focused on the tendon tension force distribution. (author)

  4. A Knowledge-based Environment for Software Process Performance Analysis

    Directory of Open Access Journals (Sweden)

    Natália Chaves Lessa Schots

    2015-08-01

    Full Text Available Background: Process performance analysis is a key step for implementing continuous improvement in software organizations. However, the knowledge to execute such analysis is not trivial and the person responsible to executing it must be provided with appropriate support. Aim: This paper presents a knowledge-based environment, named SPEAKER, proposed for supporting software organizations during the execution of process performance analysis. SPEAKER comprises a body of knowledge and a set of activities and tasks for software process performance analysis along with supporting tools to executing these activities and tasks. Method: We conducted an informal literature reviews and a systematic mapping study, which provided basic requirements for the proposed environment. We implemented the SPEAKER environment integrating supporting tools for the execution of activities and tasks of performance analysis and the knowledge necessary to execute them, in order to meet the variability presented by the characteristics of these activities. Results: In this paper, we describe each SPEAKER module and the individual evaluations of these modules, and also present an example of use comprising how the environment can guide the user through a specific performance analysis activity. Conclusion: Although we only conducted individual evaluations of SPEAKER’s modules, the example of use indicates the feasibility of the proposed environment. Therefore, the environment as a whole will be further evaluated to verify if it attains its goal of assisting in the execution of process performance analysis by non-specialist people.

  5. Support Policies in Clusters: Prioritization of Support Needs by Cluster Members According to Cluster Life Cycle

    Directory of Open Access Journals (Sweden)

    Gulcin Salıngan

    2012-07-01

    Full Text Available Economic development has always been a moving target. Both the national and local governments have been facing the challenge of implementing the effective and efficient economic policy and program in order to best utilize their limited resources. One of the recent approaches in this area is called cluster-based economic analysis and strategy development. This study reviews key literature and some of the cluster based economic policies adopted by different governments. Based on this review, it proposes “the cluster life cycle” as a determining factor to identify the support requirements of clusters. A survey, designed based on literature review of International Cluster support programs, was conducted with 30 participants from 3 clusters with different maturity stage. This paper discusses the results of this study conducted among the cluster members in Eskişehir- Bilecik-Kütahya Region in Turkey on the requirement of the support to foster the development of related clusters.

  6. Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

    Science.gov (United States)

    Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

    2017-06-01

    The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

  7. WORKPLACE SOCIAL SUPPORT AND WORK–FAMILY CONFLICT: A META-ANALYSIS CLARIFYING THE INFLUENCE OF GENERAL AND WORK–FAMILY-SPECIFIC SUPERVISOR AND ORGANIZATIONAL SUPPORT

    Science.gov (United States)

    KOSSEK, ELLEN ERNST; PICHLER, SHAUN; BODNER, TODD; HAMMER, LESLIE B.

    2011-01-01

    This article uses meta-analysis to develop a model integrating research on relationships between employee perceptions of general and work–family-specific supervisor and organizational support and work–family conflict. Drawing on 115 samples from 85 studies comprising 72,507 employees, we compared the relative influence of 4 types of workplace social support to work–family conflict: perceived organizational support (POS); supervisor support; perceived organizational work–family support, also known as family-supportive organizational perceptions (FSOP); and supervisor work–family support. Results show work–family-specific constructs of supervisor support and organization support are more strongly related to work–family conflict than general supervisor support and organization support, respectively. We then test a mediation model assessing the effects of all measures at once and show positive perceptions of general and work–family-specific supervisor indirectly relate to work–family conflict via organizational work–family support. These results demonstrate that work–family-specific support plays a central role in individuals’ work–family conflict experiences. PMID:21691415

  8. WORKPLACE SOCIAL SUPPORT AND WORK-FAMILY CONFLICT: A META-ANALYSIS CLARIFYING THE INFLUENCE OF GENERAL AND WORK-FAMILY-SPECIFIC SUPERVISOR AND ORGANIZATIONAL SUPPORT.

    Science.gov (United States)

    Kossek, Ellen Ernst; Pichler, Shaun; Bodner, Todd; Hammer, Leslie B

    2011-01-01

    This article uses meta-analysis to develop a model integrating research on relationships between employee perceptions of general and work-family-specific supervisor and organizational support and work-family conflict. Drawing on 115 samples from 85 studies comprising 72,507 employees, we compared the relative influence of 4 types of workplace social support to work-family conflict: perceived organizational support (POS); supervisor support; perceived organizational work-family support, also known as family-supportive organizational perceptions (FSOP); and supervisor work-family support. Results show work-family-specific constructs of supervisor support and organization support are more strongly related to work-family conflict than general supervisor support and organization support, respectively. We then test a mediation model assessing the effects of all measures at once and show positive perceptions of general and work-family-specific supervisor indirectly relate to work-family conflict via organizational work-family support. These results demonstrate that work-family-specific support plays a central role in individuals' work-family conflict experiences.

  9. Formative assessment framework proposal for transversal competencies: Application to analysis and problem-solving competence

    Directory of Open Access Journals (Sweden)

    Pedro Gómez-Gasquet

    2018-04-01

    Full Text Available Purpose: In the last years, there is an increasing interest in the manner that transversal competences (TC are introduced in the curricula. Transversal competences are generic and relevant skills that students have to develop through the several stages of the educational degrees. This paper analyses TCs in the context of the learning process of undergraduate and postgraduate courses. The main aim of this paper is to propose a framework to improve results. The framework facilities the student's training and one of the important pieces is undoubtedly that he has constant feedback from his assessments that allowing to improve the learning. An applying in the analysis and problem solving competence in the context of Master Degree in Advanced Engineering Production, Logistics and Supply Chain at the UPV is carried out. Design/methodology/approach: The work is the result of several years of professional experience in the application of the concept of transversal competence in the UPV with undergraduate and graduate students. As a result of this work and various educational innovation projects, a team of experts has been created, which has been discussing some aspects relevant to the improvement of the teaching-learning process. One of these areas of work has been in relation to the integration of various proposals on the application and deployment of transversal competences. With respect to this work, a conceptual proposal is proposed that has subsequently been empirically validated through the analysis of the results of several groups of students in a degree. Findings: The main result that is offered in the work is a framework that allows identifying the elements that are part of the learning process in the area of transversal competences. Likewise, the different items that are part of the framework are linked to the student's life cycle, and a temporal scope is established for their deployment. Practical implications: One of the most noteworthy

  10. Generalized synthetic aperture radar automatic target recognition by convolutional neural network with joint use of two-dimensional principal component analysis and support vector machine

    Science.gov (United States)

    Zheng, Ce; Jiang, Xue; Liu, Xingzhao

    2017-10-01

    Convolutional neural network (CNN), as a vital part of the deep learning research field, has shown powerful potential for automatic target recognition (ATR) of synthetic aperture radar (SAR). However, the high complexity caused by the deep structure of CNN makes it difficult to generalize. An improved form of CNN with higher generalization capability and less probability of overfitting, which further improves the efficiency and robustness of the SAR ATR system, is proposed. The convolution layers of CNN are combined with a two-dimensional principal component analysis algorithm. Correspondingly, the kernel support vector machine is utilized as the classifier layer instead of the multilayer perceptron. The verification experiments are implemented using the moving and stationary target acquisition and recognition database, and the results validate the efficiency of the proposed method.

  11. Operations and Modeling Analysis

    Science.gov (United States)

    Ebeling, Charles

    2005-01-01

    The Reliability and Maintainability Analysis Tool (RMAT) provides NASA the capability to estimate reliability and maintainability (R&M) parameters and operational support requirements for proposed space vehicles based upon relationships established from both aircraft and Shuttle R&M data. RMAT has matured both in its underlying database and in its level of sophistication in extrapolating this historical data to satisfy proposed mission requirements, maintenance concepts and policies, and type of vehicle (i.e. ranging from aircraft like to shuttle like). However, a companion analyses tool, the Logistics Cost Model (LCM) has not reached the same level of maturity as RMAT due, in large part, to nonexistent or outdated cost estimating relationships and underlying cost databases, and it's almost exclusive dependence on Shuttle operations and logistics cost input parameters. As a result, the full capability of the RMAT/LCM suite of analysis tools to take a conceptual vehicle and derive its operations and support requirements along with the resulting operating and support costs has not been realized.

  12. Projected impacts of federal tax policy proposals on mortality burden in the United States: A microsimulation analysis.

    Science.gov (United States)

    Kim, Daniel

    2018-06-01

    The public health consequences of federal income tax policies that influence income inequality are not well understood. I aimed to project the impacts on mortality of modifying federal income tax structures based on proposals by two recent United States (U.S.) Presidential candidates: Donald Trump and Senator Bernie Sanders. I performed a microsimulation analysis using the latest U.S. Internal Revenue Service public-use tax file with state identifiers (2008 tax year), containing nationally-representative data from 139,651 tax returns. I considered five tax plan scenarios: 1) actual 2008 tax structures; proposals in 2016 by then-candidates 2) Trump and 3) Sanders; 4) a modified Sanders plan with higher top tax rates (75%); and 5) a modified Sanders plan with higher top rates plus revenue redistribution to lower-income households (Trump and Sanders plans, respectively. Under the modified Sanders plan including higher top rates, 68,919 (95% CI: 25,221-113,561) fewer deaths/year are projected. Under the modified Sanders plan with redistribution, 333,504 (95% CI: 192,897-473,787) fewer deaths/year are expected. Policies that both raise federal income tax rates and redistribute tax revenue could confer large reductions in the total number of annual deaths among Americans. In this era of high income inequality and growing public support to address the rich-poor gap, policymakers should consider joint federal tax and redistributive policies as levers to reduce the burden of mortality in the United States. Copyright © 2017 The Author. Published by Elsevier Inc. All rights reserved.

  13. INTELLIGENT DECISION SUPPORT ON FOREX

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2014-01-01

    Full Text Available A new technology of intelligent decision support on Forex, including forming algorithms of trading signals, rules for the training sample based on technical indicators, which have the highest correlation with the price, the method of reducing the number of losing trades, is proposed. The last is based on an analysis of the wave structure of the market, while the beginning of the cycle (the wave number one is offered to be identified using Bill Williams Oscillator (Awesome oscillator. The process chain of constructing neuro-fuzzy model using software package MatLab is described.

  14. Proposed Guidance for Preparing and Reviewing Molten Salt Nonpower Reactor Licence Applications (NUREG-1537)

    Energy Technology Data Exchange (ETDEWEB)

    Belles, Randy [ORNL; Flanagan, George F. [ORNL; Voth, Marcus [Boston Government Services, LLC

    2018-05-01

    Development of non-power molten salt reactor (MSR) test facilities is under consideration to support the analyses needed for development of a full-scale MSR. These non-power MSR test facilities will require review by the US Nuclear Regulatory Commission (NRC) staff. This report proposes chapter adaptations for NUREG-1537 in the form of interim staff guidance to address preparation and review of molten salt non-power reactor license applications. The proposed adaptations are based on a previous regulatory gap analysis of select chapters from NUREG-1537 for their applicability to non-power MSRs operating with a homogeneous fuel salt mixture.

  15. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  16. A method comparison of photovoice and content analysis: research examining challenges and supports of family caregivers.

    Science.gov (United States)

    Faucher, Mary Ann; Garner, Shelby L

    2015-11-01

    The purpose of this manuscript is to compare methods and thematic representations of the challenges and supports of family caregivers identified with photovoice methodology contrasted with content analysis, a more traditional qualitative approach. Results from a photovoice study utilizing a participatory action research framework was compared to an analysis of the audio-transcripts from that study utilizing content analysis methodology. Major similarities between the results are identified with some notable differences. Content analysis provides a more in-depth and abstract elucidation of the nature of the challenges and supports of the family caregiver. The comparison provides evidence to support the trustworthiness of photovoice methodology with limitations identified. The enhanced elaboration of theme and categories with content analysis may have some advantages relevant to the utilization of this knowledge by health care professionals. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Proposed plan for critical experiments supporting thorium fuel cycle development

    International Nuclear Information System (INIS)

    Gore, B.F.

    1978-09-01

    A preliminary plan is proposed for critical experiments to provide data needed for the recycle of thorium based nuclear fuels. The sequence of experimentation starts with well moderated solutions followed by highly concentrated low moderated solutions. It then progresses through lattices moderated by water, by water plus soluble poisons, and by fissile solutions, to solutions poisoned by raschig rings and soluble poisons. Final experiments would treat lattices moderated by poisoned fissile solution, and arrays of stored fissile units

  18. Analysis of the Requirements Generation Process for the Logistics Analysis and Wargame Support Tool

    Science.gov (United States)

    2017-06-01

    impact everything from strategic logistic operations down to the energy demands at the company level. It also looks at the force structure of the...this requirement. 34. The system shall determine the efficiency of the logistics network with respect to an estimated cost of fuel used to deliver...REQUIREMENTS GENERATION PROCESS FOR THE LOGISTICS ANALYSIS AND WARGAME SUPPORT TOOL by Jonathan M. Swan June 2017 Thesis Advisor

  19. Expanding Canada Pension Plan Retirement Benefits: Assessing Big CPP Proposals

    Directory of Open Access Journals (Sweden)

    Jonathan R. Kesselman

    2010-10-01

    Full Text Available Current and growing deficiencies in many workers’ ability to maintain their accustomed living standards in retirement have evoked varied proposals for reform of Canada’s retirement income system. This study focuses on proposals for expanding the retirement benefits of the Canada Pension Plan (CPP, and undertakes comparative analysis with proposals for reforms affecting workplace pensions and individual savings. It begins by reviewing key policy questions for the retirement income system and describing essential features of several proposals for CPP benefit expansion. It then uses these “Big CPP” proposals as a basis to assess the design issues for expanding CPP benefits and the implications for other components of the retirement income system. The paper assesses each of the major private and public savings vehicles based on multifaceted criteria for a well-performing retirement income system; a mandatory public scheme with defined benefits ranks most highly on almost all criteria other than individual flexibility. Additional behavioural and institutional factors also support the use of mandatory public pensions: myopia in savings, individual investment behaviour, scale economies and costs of fund management, adverse selection and annuitization costs, the Samaritan’s Dilemma, and labour market incentives. The study provides an overview analysis of key design issues for the expansion of CPP retirement benefits. Major issues include the desirable scale of expansion for both the percentage of insurable earnings and the insurable earnings ceiling; mandatory versus voluntary coverage and options; the allocation of investment return risk; and the phasing-in of higher premiums and benefits. The study then assesses the implications of CPP expansion for other components of the retirement income system: Old Age Security and the Guaranteed Income Supplement, workplace pensions, tax provisions for savings, and individual savings. A Big CPP fits

  20. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Science.gov (United States)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  1. [A renewal proposal for support of hadroproduction of bottom using the 800 GeV/C primary proton beam at the Fermilab Tevatron

    International Nuclear Information System (INIS)

    Judd, D.J.

    1992-01-01

    The 1992 status report on Experiment E771 is given. Experiences with the 1991 run and off-line data analysis are described. Preliminary cross sections and resolutions were determined. A 1994 run is proposed. 23 figs

  2. A thematic analysis of messages posted by moderators within health-related asynchronous online support forums.

    Science.gov (United States)

    Smedley, Richard M; Coulson, Neil S

    2017-09-01

    To identify and describe the activities performed by online support community moderators. A total of 790 messages were downloaded for analysis. Messages were written by 59 moderators from 6 forums that represent a diverse range of conditions (arthritis, complex regional pain syndrome, Crohn's disease, depression, diabetes and Huntington's disease). Thematic analysis revealed four themes: supportive tasks supportive tasks involve providing help to members, moderators sharing experiences shows how they use forums to fulfil their own personal support needs, making announcements about new discoveries and upcoming events, and administrative tasks such as enforcing rules and deleting spam. These results are consistent with the helper-therapy principle and provide a new insight into the diverse and varied range of activities carried out by moderators. Moderators perform many roles, including using forums for their own support needs. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Fracture analysis of the planet support used in a nuclear power plant

    Directory of Open Access Journals (Sweden)

    Zu Shuai

    2016-01-01

    Full Text Available In this paper, the fracture analysis of the planet support, which was made of aluminium alloy and used in an electric actuator, was investigated. The laboratory analysis was conducted to find out whether there are defects generated during manufacturing process. Besides, the finite element analysis was carried out to calculate the maximum tensile stress and compared it with the material strength. The mechanism of the fracture was found to be low-cycle fatigue.

  4. Validation of a method for assessing resident physicians' quality improvement proposals.

    Science.gov (United States)

    Leenstra, James L; Beckman, Thomas J; Reed, Darcy A; Mundell, William C; Thomas, Kris G; Krajicek, Bryan J; Cha, Stephen S; Kolars, Joseph C; McDonald, Furman S

    2007-09-01

    Residency programs involve trainees in quality improvement (QI) projects to evaluate competency in systems-based practice and practice-based learning and improvement. Valid approaches to assess QI proposals are lacking. We developed an instrument for assessing resident QI proposals--the Quality Improvement Proposal Assessment Tool (QIPAT-7)-and determined its validity and reliability. QIPAT-7 content was initially obtained from a national panel of QI experts. Through an iterative process, the instrument was refined, pilot-tested, and revised. Seven raters used the instrument to assess 45 resident QI proposals. Principal factor analysis was used to explore the dimensionality of instrument scores. Cronbach's alpha and intraclass correlations were calculated to determine internal consistency and interrater reliability, respectively. QIPAT-7 items comprised a single factor (eigenvalue = 3.4) suggesting a single assessment dimension. Interrater reliability for each item (range 0.79 to 0.93) and internal consistency reliability among the items (Cronbach's alpha = 0.87) were high. This method for assessing resident physician QI proposals is supported by content and internal structure validity evidence. QIPAT-7 is a useful tool for assessing resident QI proposals. Future research should determine the reliability of QIPAT-7 scores in other residency and fellowship training programs. Correlations should also be made between assessment scores and criteria for QI proposal success such as implementation of QI proposals, resident scholarly productivity, and improved patient outcomes.

  5. Design, Implementation, and Performance Evaluation of Efficient PMIPv6 Based Mobile Multicast Sender Support Schemes

    Directory of Open Access Journals (Sweden)

    Lili Wang

    2015-01-01

    Full Text Available Proxy Mobile IPv6 (PMIPv6 is proposed as a promising network-based mobility management protocol, which does not need any participation of mobile nodes. PMIPv6 does not support the multicast well and most of the current research concentrates on the mobile multicast receiver. However, the mobile multicast sender is also very important and challenging, which has not been addressed well. Therefore, in this paper we propose two efficient PMIPv6 based mobile multicast sender support schemes which are PMIP bidirectional tunneling (PMIP-BT and PMIP direct routing (PMIP-DR. In the PMIP-BT, the multicast traffic can be delivered through the PMIPv6 bidirectional tunnel, while, in the PMIP-DR, the multicast data can be transmitted via an optimized direct multicast routing. Both of them can support the multicast sender mobility transparently enabled in the PMIPv6 networks. We evaluate the performance of the proposed schemes by theoretical analysis, and the numerical results show that the proposed schemes have a better performance in terms of the signaling cost than the current schemes. Meanwhile, the proposed schemes are also implemented on the test bed, and the experimental results not only verify the validity and feasibility of our proposed schemes, but also conclude the different scenarios to which they are applicable.

  6. User's manual of a support system for human reliability analysis

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Tamura, Kazuo.

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user's guide of the system. (author)

  7. Sentiment Analysis in the Sales Review of Indonesian Marketplace by Utilizing Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Anang Anggono Lutfi

    2018-04-01

    Full Text Available The online store is changing people’s shopping behavior. Despite the fact, the potential customer’s distrust in the quality of products and service is one of the online store’s weaknesses. A review is provided by the online stores to overcome this weakness. Customers often write a review using languages that are not well structured. Sentiment analysis is used to extract the polarity of the unstructured texts. This research attempted to do a sentiment analysis in the sales review. Sentiment analysis in sales reviews can be used as a tool to evaluate the sales. This research intends to conduct a sentiment analysis in the sales review of Indonesian marketplace by utilizing Support Vector Machine and Naive Bayes. The reviews of the data are gathered from one of Indonesian marketplace, Bukalapak. The data are classified into positive or negative class. TF-IDF is used to feature extraction. The experiment shows that Support Vector Machine with linear kernel provides higher accuracy than Naive Bayes. Support Vector Machine shows the highest accuracy average. The generated accuracy is 93.65%. This approach of sentiment analysis in sales review can be used as the base of intelligent sales evaluation for online stores in the future.

  8. A data envelopment analysis based model for proposing safety improvements: a FMEA approach

    International Nuclear Information System (INIS)

    Garcia, Pauli A. de A.; Barbosa Junior, Gilberto V.; Melo, P.F. Frutuoso e

    2005-01-01

    When performing a probabilistic safety assessment, one important step is the identification of the critical or weak points of all systems to be considered. By properly ranking these critical points, improvement recommendations may be proposed, in order to reduce the associated risks. Many tools are available for the identification of critical points, like the Failure Mode and Effect Analysis (FMEA) and the Hazard and Operability Studies (HAZOP). Once the failure modes or deviations are identified, indices associated to the occurrence probabilities, detection potential, and the effects severity, are assigned to them, and so the failure modes or deviations ranking is performed. It is common practice to assign risk priority numbers for this purpose. These numbers are obtained by multiplying the three aforementioned indices, which typically vary from 1 to 10 (natural numbers). Here, the greater the index, the worst the situation. In this paper, a data envelopment analysis (DEA) based model is used to identify the most critical failure modes or deviations and, by means of their respective distances to the boundary, to assess the improvement percentage for each index of each failure mode or deviation. Starting from this identification procedure, the decision maker can more efficiently propose improvement actions, like reliability allocation, detection design, protective barriers, etc. (author)

  9. Hydrogeologic modelling in support of a proposed Deep Geologic Repository in Canada for low and intermediate level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Sykes, J.F.; Normani, S.D.; Yin, Y. [Waterloo Univ., ON (Canada). Dept. of Civil and Environmental Engineering; Sykes, E.A.; Jensen, M.R. [Nuclear Waste Management Organization, Toronto, ON (Canada)

    2009-07-01

    Ontario Power Generation (OPG) has proposed the construction of a Deep Geologic Repository (DGR) for low and intermediate level radioactive waste at the Bruce site on the shore of Lake Huron near Tiverton, Ontario. The DGR is to be excavated at a depth of about 680 m within argillaceous limestones of Ordovician age. A saturated regional-scale and site-scale numerical modelling study has been completed in order to evaluate the safety of storing radioactive waste at the site and to better understand the geochemistry and hydrogeology of the formations surrounding the proposed DGR. This paper reported on the regional-scale base-case modelling and analysis of the measured pressure profile in deep boreholes at the DGR site. The numerical modelling study provided a framework to investigate the groundwater flow system as it relates to, and potentially affects, the safety and long-term performance of the DGR. A saturated groundwater flow model was also developed using FRAC3DVS-OPG. The objective of regional-scale groundwater modelling of the Paleozoic sedimentary sequence underlying southwestern Ontario was to provide a basis for the assembly and integration of site-specific geoscientific data and to explain the influence of parameter and scenario uncertainty on predicted long-term geosphere barrier performance. The base-case analysis showed that solute transport in the Ordovician and lower Silurian is diffusion dominant. For the base-case parameters, the estimated mean life expectancy for the proposed DGR is more than 8 million years. The possible presence of a gas phase in the rock between the Cambrian and the Niagaran was not considered in the analyses of this paper. 9 refs., 2 tabs., 10 figs.

  10. Assessing survivability to support power grid investment decisions

    International Nuclear Information System (INIS)

    Koziolek, Anne; Avritzer, Alberto; Suresh, Sindhu; Menasché, Daniel S.; Diniz, Morganna; Souza e Silva, Edmundo de; Leão, Rosa M.; Trivedi, Kishor; Happe, Lucia

    2016-01-01

    The reliability of power grids has been subject of study for the past few decades. Traditionally, detailed models are used to assess how the system behaves after failures. Such models, based on power flow analysis and detailed simulations, yield accurate characterizations of the system under study. However, they fall short on scalability. In this paper, we propose an efficient and scalable approach to assess the survivability of power systems. Our approach takes into account the phased-recovery of the system after a failure occurs. The proposed phased-recovery model yields metrics such as the expected accumulated energy not supplied between failure and full recovery. Leveraging the predictive power of the model, we use it as part of an optimization framework to assist in investment decisions. Given a budget and an initial circuit to be upgraded, we propose heuristics to sample the solution space in a principled way accounting for survivability-related metrics. We have evaluated the feasibility of this approach by applying it to the design of a benchmark distribution automation circuit. Our empirical results indicate that the combination of survivability and power flow analysis can provide meaningful investment decision support for power systems engineers. - Highlights: • We propose metrics and models for scalable survivability analysis of power systems. • The survivability model captures the system phased-recovery, from failure to repair. • The survivability model is used as a building block of an optimization framework. • Heuristics assist in investment options accounting for survivability-related metrics.

  11. Gene set analysis: limitations in popular existing methods and proposed improvements.

    Science.gov (United States)

    Mishra, Pashupati; Törönen, Petri; Leino, Yrjö; Holm, Liisa

    2014-10-01

    Gene set analysis is the analysis of a set of genes that collectively contribute to a biological process. Most popular gene set analysis methods are based on empirical P-value that requires large number of permutations. Despite numerous gene set analysis methods developed in the past decade, the most popular methods still suffer from serious limitations. We present a gene set analysis method (mGSZ) based on Gene Set Z-scoring function (GSZ) and asymptotic P-values. Asymptotic P-value calculation requires fewer permutations, and thus speeds up the gene set analysis process. We compare the GSZ-scoring function with seven popular gene set scoring functions and show that GSZ stands out as the best scoring function. In addition, we show improved performance of the GSA method when the max-mean statistics is replaced by the GSZ scoring function. We demonstrate the importance of both gene and sample permutations by showing the consequences in the absence of one or the other. A comparison of asymptotic and empirical methods of P-value estimation demonstrates a clear advantage of asymptotic P-value over empirical P-value. We show that mGSZ outperforms the state-of-the-art methods based on two different evaluations. We compared mGSZ results with permutation and rotation tests and show that rotation does not improve our asymptotic P-values. We also propose well-known asymptotic distribution models for three of the compared methods. mGSZ is available as R package from cran.r-project.org. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  12. Prediction and analysis of beta-turns in proteins by support vector machine.

    Science.gov (United States)

    Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

    2003-01-01

    Tight turn has long been recognized as one of the three important features of proteins after the alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns. Analysis and prediction of beta-turns in particular and tight turns in general are very useful for the design of new molecules such as drugs, pesticides, and antigens. In this paper, we introduce a support vector machine (SVM) approach to prediction and analysis of beta-turns. We have investigated two aspects of applying SVM to the prediction and analysis of beta-turns. First, we developed a new SVM method, called BTSVM, which predicts beta-turns of a protein from its sequence. The prediction results on the dataset of 426 non-homologous protein chains by sevenfold cross-validation technique showed that our method is superior to the other previous methods. Second, we analyzed how amino acid positions support (or prevent) the formation of beta-turns based on the "multivariable" classification model of a linear SVM. This model is more general than the other ones of previous statistical methods. Our analysis results are more comprehensive and easier to use than previously published analysis results.

  13. 76 FR 70722 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

    Science.gov (United States)

    2011-11-15

    ... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To Aid Public Comment Correction In notice document 2011-28497 appearing on pages 68189-68191 in the issue of Thursday, November 3, 2011, make the following corrections: 1...

  14. A quantitative content analysis of UK newsprint coverage of proposed legislation to prohibit smoking in private vehicles carrying children.

    Science.gov (United States)

    Patterson, Chris; Semple, Sean; Wood, Karen; Duffy, Sheila; Hilton, Shona

    2015-08-08

    Mass media representations of health issues influence public perceptions of those issues. Despite legislation prohibiting smoking in public spaces, second-hand smoke (SHS) remains a health risk in the United Kingdom (UK). Further legislation might further limit children's exposure to SHS by prohibiting smoking in private vehicles carrying children. This research was designed to determine how UK national newspapers represented the debate around proposed legislation to prohibit smoking in private vehicles carrying children. Quantitative analysis of the manifest content of 422 articles about children and SHS published in UK and Scottish newspapers between 1st January 2003 and 16th February 2014. Researchers developed a coding frame incorporating emergent themes from the data. Each article was double-coded. The frequency of relevant articles rose and fell in line with policy debate events. Children were frequently characterised as victims of SHS, and SHS was associated with various health risks. Articles discussing legislation targeting SHS in private vehicles carrying children presented supportive arguments significantly more frequently than unsupportive arguments. The relatively positive representation of legislation prohibiting smoking in vehicles carrying children is favourable to policy advocates, and potentially indicative of likely public acceptance of legislation. Our findings support two lessons that public health advocates may consider: the utility of presenting children as a vulnerable target population, and the possibility of late surges in critical arguments preceding policy events.

  15. Data structures supporting multi-region adaptive isogeometric analysis

    Science.gov (United States)

    Perduta, Anna; Putanowicz, Roman

    2018-01-01

    Since the first paper published in 2005 Isogeometric Analysis (IGA) has gained strong interest and found applications in many engineering problems. Despite the advancement of the method, there are still far fewer software implementations comparing to Finite Element Method. The paper presents an approach to the development of data structures that can support multi-region IGA with local mesh refinement (patch-based) and possible application in IGA-FEM models. The purpose of this paper is to share original design concepts, that authors have created while developing an IGA package, which other researchers may find beneficial for their own simulation codes.

  16. Back Analysis of Geomechanical Parameters in Underground Engineering Using Artificial Bee Colony

    Directory of Open Access Journals (Sweden)

    Changxing Zhu

    2014-01-01

    Full Text Available Accurate geomechanical parameters are critical in tunneling excavation, design, and supporting. In this paper, a displacements back analysis based on artificial bee colony (ABC algorithm is proposed to identify geomechanical parameters from monitored displacements. ABC was used as global optimal algorithm to search the unknown geomechanical parameters for the problem with analytical solution. To the problem without analytical solution, optimal back analysis is time-consuming, and least square support vector machine (LSSVM was used to build the relationship between unknown geomechanical parameters and displacement and improve the efficiency of back analysis. The proposed method was applied to a tunnel with analytical solution and a tunnel without analytical solution. The results show the proposed method is feasible.

  17. Integrating clinicians, knowledge and data: expert-based cooperative analysis in healthcare decision support.

    Science.gov (United States)

    Gibert, Karina; García-Alonso, Carlos; Salvador-Carulla, Luis

    2010-09-30

    Decision support in health systems is a highly difficult task, due to the inherent complexity of the process and structures involved. This paper introduces a new hybrid methodology Expert-based Cooperative Analysis (EbCA), which incorporates explicit prior expert knowledge in data analysis methods, and elicits implicit or tacit expert knowledge (IK) to improve decision support in healthcare systems. EbCA has been applied to two different case studies, showing its usability and versatility: 1) Bench-marking of small mental health areas based on technical efficiency estimated by EbCA-Data Envelopment Analysis (EbCA-DEA), and 2) Case-mix of schizophrenia based on functional dependency using Clustering Based on Rules (ClBR). In both cases comparisons towards classical procedures using qualitative explicit prior knowledge were made. Bayesian predictive validity measures were used for comparison with expert panels results. Overall agreement was tested by Intraclass Correlation Coefficient in case "1" and kappa in both cases. EbCA is a new methodology composed by 6 steps:. 1) Data collection and data preparation; 2) acquisition of "Prior Expert Knowledge" (PEK) and design of the "Prior Knowledge Base" (PKB); 3) PKB-guided analysis; 4) support-interpretation tools to evaluate results and detect inconsistencies (here Implicit Knowledg -IK- might be elicited); 5) incorporation of elicited IK in PKB and repeat till a satisfactory solution; 6) post-processing results for decision support. EbCA has been useful for incorporating PEK in two different analysis methods (DEA and Clustering), applied respectively to assess technical efficiency of small mental health areas and for case-mix of schizophrenia based on functional dependency. Differences in results obtained with classical approaches were mainly related to the IK which could be elicited by using EbCA and had major implications for the decision making in both cases. This paper presents EbCA and shows the convenience of

  18. Integrating clinicians, knowledge and data: expert-based cooperative analysis in healthcare decision support

    Directory of Open Access Journals (Sweden)

    García-Alonso Carlos

    2010-09-01

    Full Text Available Abstract Background Decision support in health systems is a highly difficult task, due to the inherent complexity of the process and structures involved. Method This paper introduces a new hybrid methodology Expert-based Cooperative Analysis (EbCA, which incorporates explicit prior expert knowledge in data analysis methods, and elicits implicit or tacit expert knowledge (IK to improve decision support in healthcare systems. EbCA has been applied to two different case studies, showing its usability and versatility: 1 Bench-marking of small mental health areas based on technical efficiency estimated by EbCA-Data Envelopment Analysis (EbCA-DEA, and 2 Case-mix of schizophrenia based on functional dependency using Clustering Based on Rules (ClBR. In both cases comparisons towards classical procedures using qualitative explicit prior knowledge were made. Bayesian predictive validity measures were used for comparison with expert panels results. Overall agreement was tested by Intraclass Correlation Coefficient in case "1" and kappa in both cases. Results EbCA is a new methodology composed by 6 steps:. 1 Data collection and data preparation; 2 acquisition of "Prior Expert Knowledge" (PEK and design of the "Prior Knowledge Base" (PKB; 3 PKB-guided analysis; 4 support-interpretation tools to evaluate results and detect inconsistencies (here Implicit Knowledg -IK- might be elicited; 5 incorporation of elicited IK in PKB and repeat till a satisfactory solution; 6 post-processing results for decision support. EbCA has been useful for incorporating PEK in two different analysis methods (DEA and Clustering, applied respectively to assess technical efficiency of small mental health areas and for case-mix of schizophrenia based on functional dependency. Differences in results obtained with classical approaches were mainly related to the IK which could be elicited by using EbCA and had major implications for the decision making in both cases. Discussion This

  19. Certification/enforcement analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    Industry compliance with minimum energy efficiency standards will be assured through a two-part program approach of certification and enforcement activities. The technical support document (TSD) presents the analyses upon which the proposed rule for assuring that consumer product comply with applicable energy efficiency standards is based. Much of the TSD is based upon support provided DOE by Vitro Laboratories. The OAO Corporation provided additional support in the development of the sampling plan incorporated in the proposed rule. Vitro's recommended approach to appliance certification and enforcement, developed after consideration of various program options, benefits, and impacts, establishes the C/E program framework, general criteria, and procedures for assuring a specified level of energy efficiency performance of covered consumer products. The results of the OAO analysis are given in Volume II of the TSD.

  20. FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

    Science.gov (United States)

    The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

  1. An Analysis of the President’s Budgetary Proposals for Fiscal Year 2010

    Science.gov (United States)

    2009-06-01

    C corporations are corporations that are subject to the corporate income tax . 20 AN ANALYSIS OF THE PRESIDENT’S BUDGETARY PROPOSALS FOR FISCAL YEAR...dividends lower the overall taxation of corporate profits, some of which are taxed twice: once under the corporate income tax , and again when people...earnings are not sub- ject to the corporate income tax , such as gains on real estate held by individuals. The lower capital gains tax rate also

  2. Organizational Supports for Research Evidence Use in State Public Health Agencies: A Latent Class Analysis.

    Science.gov (United States)

    Hu, Hengrui; Allen, Peg; Yan, Yan; Reis, Rodrigo S; Jacob, Rebekah R; Brownson, Ross C

    2018-05-30

    Use of research evidence in public health decision making can be affected by organizational supports. Study objectives are to identify patterns of organizational supports and explore associations with research evidence use for job tasks among public health practitioners. In this longitudinal study, we used latent class analysis to identify organizational support patterns, followed by mixed logistic regression analysis to quantify associations with research evidence use. The setting included 12 state public health department chronic disease prevention units and their external partnering organizations involved in chronic disease prevention. Chronic disease prevention staff from 12 US state public health departments and partnering organizations completed self-report surveys at 2 time points, in 2014 and 2016 (N = 872). Latent class analysis was employed to identify subgroups of survey participants with distinct patterns of perceived organizational supports. Two classify-analyze approaches (maximum probability assignment and multiple pseudo-class draws) were used in 2017 to investigate the association between latent class membership and research evidence use. The optimal model identified 4 latent classes, labeled as "unsupportive workplace," "low agency leadership support," "high agency leadership support," and "supportive workplace." With maximum probability assignment, participants in "high agency leadership support" (odds ratio = 2.08; 95% CI, 1.35-3.23) and "supportive workplace" (odds ratio = 1.74; 95% CI, 1.10-2.74) were more likely to use research evidence in job tasks than "unsupportive workplace." The multiple pseudo-class draws produced comparable results with odds ratio = 2.09 (95% CI, 1.31-3.30) for "high agency leadership support" and odds ratio = 1.74 (95% CI, 1.07-2.82) for "supportive workplace." Findings suggest that leadership support may be a crucial element of organizational supports to encourage research evidence use. Organizational supports such

  3. Tradeoff Analysis for Combat Service Support Wireless Communications Alternatives

    Energy Technology Data Exchange (ETDEWEB)

    Burnette, John R.; Thibodeau, Christopher C.; Greitzer, Frank L.

    2002-02-28

    As the Army moves toward more mobile and agile forces and continued sustainment of numerous high-cost legacy logistics management systems, the requirement for wireless connectivity and a wireless network to supporting organizations has become ever more critical. There are currently several Army communications initiatives underway to resolve this wireless connectivity issue. However, to fully appreciate and understand the value of these initiatives, a Tradeoff Analysis is needed. The present study seeks to identify and assess solutions. The analysis identified issues that impede Interim Brigade Combat Team (IBCT) communication system integration and outlined core requirements for sharing of logistics data between the field and Army battle command systems. Then, the analysis examined wireless communication alternatives as possible solutions for IBCT logistics communications problems. The current baseline system was compared with possible alternatives involving tactical radio systems, wireless/near term digital radio, cellular satellite, and third-generation (3G) wireless technologies. Cellular satellite and 3G wireless technologies offer clear advantages and should be considered for later IBCTs.

  4. 78 FR 53763 - Proposed Collection; 60-day Comment Request Cancer Trials Support Unit (CTSU) (NCI)

    Science.gov (United States)

    2013-08-30

    ... proposed data collection projects, the National Cancer Institute (NCI), National Institutes of Health (NIH), will publish periodic summaries of proposed projects to be submitted to the Office of Management and... proposed collection of information, including the validity of the methodology and assumptions used; (3...

  5. Computer-Based Support of Decision Making Processes during Biological Incidents

    Directory of Open Access Journals (Sweden)

    Karel Antos

    2010-04-01

    Full Text Available The paper describes contextual analysis of a general system that should provide a computerized support of decision making processes related to response operations in case of a biological incident. This analysis is focused on information systems and information resources perspective and their integration using appropriate tools and technology. In the contextual design the basic modules of BioDSS system are suggested and further elaborated. The modules deal with incident description, scenarios development and recommendation of appropriate countermeasures. Proposals for further research are also included.

  6. Examination of bariatric surgery Facebook support groups: a content analysis.

    Science.gov (United States)

    Koball, Afton M; Jester, Dylan J; Domoff, Sarah E; Kallies, Kara J; Grothe, Karen B; Kothari, Shanu N

    2017-08-01

    Support following bariatric surgery is vital to ensure long-term postoperative success. Many individuals undergoing bariatric surgery are turning to online modalities, especially the popular social media platform Facebook, to access support groups and pages. Despite evidence suggesting that the majority of patients considering bariatric surgery are utilizing online groups, little is known about the actual content of these groups. The purpose of the present study was to conduct a content analysis of bariatric surgery support groups and pages on Facebook. Online via Facebook, independent academic medical center, United States. Data from bariatric surgery-related Facebook support groups and pages were extracted over a 1-month period in 2016. Salient content themes (e.g., progress posts, depression content, eating behaviors) were coded reliably (all κ> .70). More than 6,800 posts and replies were coded. Results indicated that seeking recommendations (11%), providing information or recommendations (53%), commenting on changes since surgery (19%), and lending support to other members (32%) were the most common types of posts. Content surrounding anxiety, eating behaviors, depression, body image, weight bias, and alcohol was found less frequently. Online bariatric surgery groups can be used to receive support, celebrate physical and emotional accomplishments, provide anecdotal accounts of the "bariatric lifestyle" for preoperative patients, and comment on challenges with mental health and experiences of weight bias. Providers should become acquainted with the content commonly found in online groups and exercise caution in recommending these platforms to information-seeking patients. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  7. Public responses to proposals for a tax on sugar-sweetened beverages: A thematic analysis of online reader comments posted on major UK news websites.

    Directory of Open Access Journals (Sweden)

    Molly Thomas-Meyer

    Full Text Available Regular consumption of sugar sweetened beverages (SSBs is associated with weight gain, type 2 diabetes, and dental caries. The UK will introduce a levy on the manufacturers of SSBs in 2018. Details will be negotiated over the next two years. How the UK public views SSB taxes is likely to be an important determinant of the content and success of the final policy. We aimed to capture the views, ideas and concerns of commenters on major UK news websites on SSB taxes.We conducted a qualitative analysis of reader comments to online news coverage of one proposal for an SSB tax in the UK. 1645 comments on four articles were included. Three underpinning themes influenced support or opposition to the tax: the balance between individual responsibility and autonomy, and population need; mistrust of the intention of the proposed tax and those promoting it; and variations in the perceived complexity of unhealthy diets and obesity associated with variations in what are considered appropriate interventions. Arguments under each theme were used to justify both support and opposition in different cases.As the final form of the UK SSB tax is negotiated, effort should be made to address the concerns we identified. Our results suggest these efforts could usefully focus on emphasising the social and environmental determinants of diet and obesity, reinforcing the benefits of the tax to the NHS, and pitching the tax as playing into a variety of different conceptualisations of obesity.

  8. Image denoising via collaborative support-agnostic recovery

    KAUST Repository

    Behzad, Muzammil; Masood, Mudassir; Ballal, Tarig; Shadaydeh, Maha; Al-Naffouri, Tareq Y.

    2017-01-01

    In this paper, we propose a novel patch-based image denoising algorithm using collaborative support-agnostic sparse reconstruction. In the proposed collaborative scheme, similar patches are assumed to share the same support taps. For sparse reconstruction, the likelihood of a tap being active in a patch is computed and refined through a collaboration process with other similar patches in the similarity group. This provides a very good patch support estimation, hence enhancing the quality of image restoration. Performance comparisons with state-of-the-art algorithms, in terms of PSNR and SSIM, demonstrate the superiority of the proposed algorithm.

  9. Image denoising via collaborative support-agnostic recovery

    KAUST Repository

    Behzad, Muzammil

    2017-06-20

    In this paper, we propose a novel patch-based image denoising algorithm using collaborative support-agnostic sparse reconstruction. In the proposed collaborative scheme, similar patches are assumed to share the same support taps. For sparse reconstruction, the likelihood of a tap being active in a patch is computed and refined through a collaboration process with other similar patches in the similarity group. This provides a very good patch support estimation, hence enhancing the quality of image restoration. Performance comparisons with state-of-the-art algorithms, in terms of PSNR and SSIM, demonstrate the superiority of the proposed algorithm.

  10. Longevity of Emplacement Drift Ground Support Materials

    International Nuclear Information System (INIS)

    Tang, D.

    2000-01-01

    The purpose of this analysis is to evaluate the factors affecting the longevity of emplacement drift ground support materials and to develop a basis for selection of materials for ground support that will function throughout the preclosure period. The Development Plan (DP) for this analysis is given in CRWMS M and O (Civilian Radioactive Waste Management System Management and Operating Contractor) (1999a). The candidate materials for ground support are steel (carbon steel, ductile cast iron, galvanized steel, and stainless steel, etc.) and cement. Steel will mainly be used for steel sets, lagging, channels, rock bolts, and wire mesh. Cement usage is only considered in the case of grouted rock bolts. The candidate materials for the invert structure are steel and crushed rock ballast. The materials shall be evaluated for the repository emplacement drift environment under a specific thermal loading condition based on the proposed License Application Design Selection (LADS) design. The analysis consists of the following tasks: (1) Identify factors affecting the longevity of ground control materials for use in emplacement drifts. (2) Review existing documents concerning behavior of candidate ground control materials during the preclosure period. The major criteria to be considered for steel are mechanical and thermal properties, and durability, of which corrosion is the most important concern. (3) Evaluate the available results and develop recommendations for material(s) to be used

  11. A Decision Support System Based on Genetic Algorithm (Case Study: Scheduling in Supply Chain

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Beheheshtinia

    2016-10-01

    Full Text Available Nowadays, the application of effective and efficient decisions on complex issues require the use of decision support systems. This Paper provided a decision support system based on the genetic algorithm for production and transportation scheduling problem in a supply chain. It is assumed that there are number of orders that should be produced by suppliers and should be transported to the plant by a transportation fleet. The aim is to assign orders to the suppliers, specify the order of their production, allocate processed orders to the vehicles for transport and to arrange them in a way that minimizes the total delivery time. It has been shown that the complexity of the problem was related to Np-hard and there was no possibility of using accurate methods to solve the problem in a reasonable time. So, the genetic algorithm was used in this paper to solve the problem. By using this decision support system, a new approach to supply chain management was proposed. The analysis of the approach proposed in this study compared to the conventional approaches by the decision support system indicated the preference of our proposed approach

  12. Social support and subjective burden in caregivers of adults and older adults: A meta-analysis.

    Science.gov (United States)

    Del-Pino-Casado, Rafael; Frías-Osuna, Antonio; Palomino-Moral, Pedro A; Ruzafa-Martínez, María; Ramos-Morcillo, Antonio J

    2018-01-01

    Despite the generally accepted belief that social support improves caregiver adjustment in general and subjective burden in particular, the literature shows mixed findings, and a recent review concluded that the predictive strength of caregiver social support in determining caregiver burden is less evident, due to the conceptual diversity of this determinant. The purpose of this review is to analyse the relationship of perceived and received social support with subjective burden among informal caregivers of an adult or older adult. A systematic search was carried out up to September 2017 in the following databases: MEDLINE (PubMed), CINAHL, EMBASE, PsycINFO), Scopus and ISI Proceedings, and a meta-analysis was performed with the results of the selected and included studies. Fifty-six studies were included in the meta-analysis, which provided 46 independent comparisons for perceived support and 16 for received support. Most of these studies were cross-sectional. There was a moderate, negative association of perceived social support on subjective burden (r = -0.36; CI 95% = -0.40, -0.32) and a very small, negative association of received support on subjective burden (r = -0.05; CI 95% = -0.095, -0.001). 1) perceived and received support are not redundant constructs, 2) the relationships between social support and subjective burden depend on whether the social support is measured as perceived or received, 3) the relationship of perceived social support with subjective burden has a bigger effect size than that of received social support, the relation between received support and subjective burden being clinically irrelevant, 4) perceived social support may be a good predictor of subjective burden. Our findings broadly support interventions promoting social support in caregivers to prevent or alleviate subjective burden, and specifically, to intervene on the promotion of perceived social support more than on the promotion of received social support when preventing or

  13. Support system of a structure on a support base

    International Nuclear Information System (INIS)

    Arene, G.; Renaux, C.; Minguet, J.L.; Chantot, H.

    1984-01-01

    Two series of strips are fixed to the structure to be supported and to the base to define each one a closed convex envelope; the strips are flexible in the radial direction with regard to the envelope. The two series of strips are connected by a treillis of rigid bars set to form juxtaposed V or X. A good transversal rigidity and a certain radial flexibility are obtained. The invention can be applied to a fast neutron nuclear reactor, the reactor comprising a vertical axis vessel filled with liquid metal; the vessel rests on a support foundation by means of the support system proposed by the invention. The support system allows the supported structure to resist the effects of an eventual earthquake and brutal temperature variations [fr

  14. ON CURRICULAR PROPOSALS OF THE PORTUGUESE LANGUAGE: A DOCUMENT ANALYSIS IN JUIZ DE FORA (MG

    Directory of Open Access Journals (Sweden)

    Tânia Guedes MAGALHÃES

    2014-12-01

    Full Text Available This paper, whose objective is to analyze two curricular proposals of Portuguese from the Juiz de Fora City Hall (2001 and 2012, is an extract from a research entitled “On text genres and teaching: a collaborative research with teachers of Portuguese” (2011/2013. Text genres have been suggested by curricular proposals as a central object for teachers who work with Portuguese language teaching; for this, it is relevant to analyze the documents in the realm of the ongoing research. As theoretical references, we used authors who propose a didactic model based on the development of language skills and linguistic reasoning (MENDONÇA, 2006 which in turn are based on an interactional conception of language (BRONCKART, 1999; SCHNEUWLY; DOLZ, 2004. Document analysis was used as methodology, which envisions assessment of pieces of information in documents as well as their outcomes. The data show that the 2012 curricular proposal is more adequate to Portuguese language teaching than the first one, mainly for its theoretical and methodological grounding, which emphasize the development of students’ linguistic and discursive skills. Guided by an interactionist notion – unlike the norm-centered 2001 proposal – the 2012 document fosters the development of linguistic reasoning and usage skills.

  15. Planning and support materials in teaching story comprehension from the interbehavioral approach

    Directory of Open Access Journals (Sweden)

    Ana Cristina Mascareño Bórquez

    2017-12-01

    Full Text Available Despite the latest changes in educational reforms within the country, curriculum plans and ongoing program renewals aimed at resolving the educational gap reflected in national statistics, the results remain unfavorable. This leads to reflection and analysis to generate and implement new forms and teaching strategies. The purpose of this paper is to present the design of an alternative proposal for planning and the development of support materials, developed according to the second block of sixth grade primary education, in two expected learning contained in the formal basic education curriculum. Centered on the interaction in teaching-learning and according to different levels of functional aptitude. Subsequently it underwent a process of piloting and revision by experts to prove the pertinence of the planning and precisions for its implementation. As results, the support materials and the planning proposal are presented and discussed with the authors who have worked on planning proposals from the inter-behavioral approach.

  16. Use of the decision support system RECASS NT (Radio Ecological Analysis Support System) for anti terrorism actions

    International Nuclear Information System (INIS)

    Bulgakov, V.G.; Gariyants, A.M.; Kosykh, V.S.; Shershakov, V.M.

    2006-01-01

    Decision support system RECASS NT (Radio Ecological Analysis Support System) was developed and is still enhancing in Federal Service Roshydromet for providing on-line estimates and prognoses of radiation and chemical situation in the event of an emergency, including acts of terrorism, as well as to estimate transboundary pollutants transport. RECASS NT has been installed at all ten NPPs of the Russian Federation, in Crisis Centers of Roshydromet, concern Rosenergoatom and Minatom, at plants for destroying chemical weapons. The paper describes the structure of RECASS NT system and discuss its possible application in case of an emergency on examples of using the system during radiation emergency response exercises at NPPs. RECASS NT can be used for developing recommendations regarding time when anti terrorism operations are better to be started with a view to minimize damage

  17. [Correspondence analysis on the types of social support and the role of the supporters towards people living with HIV/AIDS in rural areas, Henan province].

    Science.gov (United States)

    Zhang, Ting; Zeng, Ting-ting; Lv, Jun; Cao, Wei-hua

    2010-04-01

    To explore the relationship between types of social support and roles of supporters, on people living with HIV/AIDS, in rural areas of Henan province. A rural area from Henan province where the main route of HIV transmission was through blood collection was selected as the research site. Survivors registered in that area were randomly selected as subjects. Questionnaire on social support related to social network analysis paradigm was designed and face-to-face interview was used to collect information. Correspondence analysis method was adopted to analyze the relationship between types of social support and roles of social supporters. 204 questionnaires were sorted out with 2227 pairs of bind between types of social support and roles of social supporters analyzed. According to scatter plot of row and column points, our data showed that support from the spouses was mainly associated with caring for daily life and companionship for medical treatment on the patients. The research subjects stated that they would primarily discuss over the major issues or chat with their parents and children as they were the ones that they could trust the most. However, they would turn to their brothers, sisters or other relatives to borrow money or asking for other kinds of help. Non-relatives were the resources on social interaction, like going-out together or borrowing life necessities. Supporters with different social roles on HIV/AIDS issues, appeared to be corresponded to specific types of social support in rural areas of Henan province.

  18. Bayesian networks modelling in support to cross-cutting analysis of water supply and sanitation in developing countries

    Directory of Open Access Journals (Sweden)

    C. Dondeynaz

    2013-09-01

    Full Text Available Despite the efforts made towards the Millennium Development Goals targets during the last decade, improved access to water supply or basic sanitation still remains unavailable for millions of people across the world. This paper proposes a set of models that use 25 key variables and country profiles from the WatSan4Dev data set involving water supply and sanitation (Dondeynaz et al., 2012. This paper suggests the use of Bayesian network modelling methods because they are more easily adapted to deal with non-normal distributions, and integrate a qualitative approach for data analysis. They also offer the advantage of integrating preliminary knowledge into the probabilistic models. The statistical performance of the proposed models ranges between 20 and 5% error rates, which are very satisfactory taking into account the strong heterogeneity of variables. Probabilistic scenarios run from the models allow an assessment of the relationships between human development, external support, governance aspects, economic activities and water supply and sanitation (WSS access. According to models proposed in this paper, gaining a strong poverty reduction will require the WSS access to reach 75–76% through: (1 the management of ongoing urbanisation processes to avoid slums development; and (2 the improvement of health care, for instance for children. Improving governance, such as institutional efficiency, capacities to make and apply rules, or control of corruption is positively associated with WSS sustainable development. The first condition for an increment of the HDP (human development and poverty remains of course an improvement of the economic conditions with higher household incomes. Moreover, a significant country commitment to the environment, associated with civil society freedom of expression constitutes a favourable setting for sustainable WSS services delivery. Intensive agriculture using irrigation practises also appears as a mean for sustainable

  19. Bayesian networks modelling in support to cross-cutting analysis of water supply and sanitation in developing countries

    Science.gov (United States)

    Dondeynaz, C.; López Puga, J.; Carmona Moreno, C.

    2013-09-01

    Despite the efforts made towards the Millennium Development Goals targets during the last decade, improved access to water supply or basic sanitation still remains unavailable for millions of people across the world. This paper proposes a set of models that use 25 key variables and country profiles from the WatSan4Dev data set involving water supply and sanitation (Dondeynaz et al., 2012). This paper suggests the use of Bayesian network modelling methods because they are more easily adapted to deal with non-normal distributions, and integrate a qualitative approach for data analysis. They also offer the advantage of integrating preliminary knowledge into the probabilistic models. The statistical performance of the proposed models ranges between 20 and 5% error rates, which are very satisfactory taking into account the strong heterogeneity of variables. Probabilistic scenarios run from the models allow an assessment of the relationships between human development, external support, governance aspects, economic activities and water supply and sanitation (WSS) access. According to models proposed in this paper, gaining a strong poverty reduction will require the WSS access to reach 75-76% through: (1) the management of ongoing urbanisation processes to avoid slums development; and (2) the improvement of health care, for instance for children. Improving governance, such as institutional efficiency, capacities to make and apply rules, or control of corruption is positively associated with WSS sustainable development. The first condition for an increment of the HDP (human development and poverty) remains of course an improvement of the economic conditions with higher household incomes. Moreover, a significant country commitment to the environment, associated with civil society freedom of expression constitutes a favourable setting for sustainable WSS services delivery. Intensive agriculture using irrigation practises also appears as a mean for sustainable WSS thanks to

  20. Analysis of Logistics in Support of a Human Lunar Outpost

    Science.gov (United States)

    Cirillo, William; Earle, Kevin; Goodliff, Kandyce; Reeves, j. D.; Andrashko, Mark; Merrill, R. Gabe; Stromgren, Chel

    2008-01-01

    Strategic level analysis of the integrated behavior of lunar transportation system and lunar surface system architecture options is performed to inform NASA Constellation Program senior management on the benefit, viability, affordability, and robustness of system design choices. This paper presents an overview of the approach used to perform the campaign (strategic) analysis, with an emphasis on the logistics modeling and the impacts of logistics resupply on campaign behavior. An overview of deterministic and probabilistic analysis approaches is provided, with a discussion of the importance of each approach to understanding the integrated system behavior. The logistics required to support lunar surface habitation are analyzed from both 'macro-logistics' and 'micro-logistics' perspectives, where macro-logistics focuses on the delivery of goods to a destination and micro-logistics focuses on local handling of re-supply goods at a destination. An example campaign is provided to tie the theories of campaign analysis to results generation capabilities.

  1. Supporting secure programming in web applications through interactive static analysis.

    Science.gov (United States)

    Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

    2014-07-01

    Many security incidents are caused by software developers' failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases.

  2. Coach autonomy support and quality of sport engagement in young soccer players.

    Science.gov (United States)

    Alvarez, María Sol; Balaguer, Isabel; Castillo, Isabel; Duda, Joan L

    2009-05-01

    Based on the self-determination theory (Ryan & Deci, 2000), this study tested a model of the assumed sequential relationships between perceived autonomy support, psychological need satisfaction, self-determined motivation, and enjoyment/boredom. The hypothesized mediational roles of psychological need satisfaction and self-determined motivation were also studied. In a sample of 370 young male soccer players, path analysis results offered support for the proposed model. Total mediation was supported in the case of the psychological need satisfaction in the relationship between autonomy support and self-determined motivation, and partial mediation for self-determined motivation in the links between psychological need satisfaction and enjoyment (positive) and boredom (negative). Implications of autonomy-supportive behaviors provided by coaches for the quality of sport involvement among young athletes are discussed.

  3. Social support, oxytocin, and PTSD

    NARCIS (Netherlands)

    Olff, Miranda; Koch, Saskia B. J.; Nawijn, Laura; Frijling, Jessie L.; van Zuiden, Mirjam; Veltman, Dick J.

    2014-01-01

    A lack of social support and recognition by the environment is one of the most consistent risk factors for posttraumatic stress disorder (PTSD), and PTSD patients will recover faster with proper social support. The oxytocin system has been proposed to underlie beneficial effects of social support as

  4. Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

    Science.gov (United States)

    Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

    2004-01-01

    A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

  5. Using reliability analysis to support decision making\\ud in phased mission systems

    OpenAIRE

    Zhang, Yang; Prescott, Darren

    2017-01-01

    Due to the environments in which they will operate, future autonomous systems must be capable of reconfiguring quickly and safely following faults or environmental changes. Past research has shown how, by considering autonomous systems to perform phased missions, reliability analysis can support decision making by allowing comparison of the probability of success of different missions following reconfiguration. Binary Decision Diagrams (BDDs) offer fast, accurate reliability analysis that cou...

  6. Proposed systematic methodology for analysis of Pb-210 radioactivity in residues produced in Brazilian natural gas pipes

    International Nuclear Information System (INIS)

    Ferreira, Aloisio Cordilha

    2003-11-01

    Since the 80's, the potential radiological hazards due to the handling of solid wastes contaminated with Rn-222 long-lived progeny - Pb-210 in special - produced in gas pipes and removed by pig operations have been subject of growing concern abroad our country. Nevertheless, little or no attention has been paid to this matter in the Brazilian plants up to now, being these hazards frequently underestimated or even ignored. The main purpose of this work was to propose a systematic methodology for analysis of Pb-210 radioactivity in black powder samples from some Brazilian plants, through the evaluation of direct Pb-210 gamma spectrometry and Bi-210 beta counting technical viabilities. In both cases, one in five samples of black powder analysed showed relevant activity (above 1Bq/kg) of Pb-210, being these results probably related to particular features of each specific plant (production levels, reservoir geochemical profile, etc.), in such a way that a single pattern is not observed. For the proposed methodology, gamma spectrometry proved to be the most reliable technique, showing a 3.5% standard deviation, and, for a 95% confidence level, overall fitness in the range of Pb-210 concentration of activity presented in the standard sample reference sheet, provided by IAEA for intercomparison purposes. In the Brazilian scene, however, the availability of statistically supported evidences is insufficient to allow the potential radiological hazard due to the management of black powder to be discarded. Thus, further research efforts are recommended in order to detect the eventually critical regions or plants where gas exploration, production and processing practices will require a regular program of radiological surveillance, in the near future. (author)

  7. A new metal electrocatalysts supported matrix: Palladium nanoparticles supported silicon carbide nanoparticles and its application for alcohol electrooxidation

    International Nuclear Information System (INIS)

    Dai Hong; Chen Yanling; Lin Yanyu; Xu Guifang; Yang Caiping; Tong Yuejin; Guo Longhua; Chen Guonan

    2012-01-01

    In this paper, we propose a facile approach for palladium nanoparticles load using silicon carbide nanoparticles as the new supported matrix and a familiar NaBH 4 as reducer. Detailed X-ray photoelectron spectrum (XPS) and transmission electron microscopy (TEM) analysis of the resultant products indicated that palladium nanoparticles are successfully immobilized onto the surface of the silicon carbide nanoparticles with uniform size distribution between 5 and 7 nm. The relative electrochemical characterization clearly demonstrated excellent electrocatalytic activity of this material toward alcohol in alkaline electrolytes. Investigation on the characteristics of the electrocatalytic activity of this material further indicated that the palladium nanoparticles supporting on SiC are very promising for direct alcohol fuel cells (DMFCs), biosensor and electronic devices. Moreover, it was proved that silicon carbide nanoparticles with outstanding properties as support for catalysis are of strong practical interest. And the silicon carbide could perform attractive role in adsorbents, electrodes, biomedical applications, etc.

  8. Technical support document for proposed 1994 revision of the MEC thermal envelope requirements

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C.C.; Lucas, R.G.

    1994-03-01

    This report documents the development of the proposed revision of the Council of American Building Officials` (CABO) 1994 supplement to the 1993 Model Energy Code (MEC) building thermal envelope requirements for maximum component U{sub 0}-value. The 1994 amendments to the 1993 MEC were established in last year`s code change cycle and did not change the envelope requirements. The research underlying the proposed MEC revision was conducted by Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) Building Energy Standards program. The goal of this research was to develop revised guidelines based on an objective methodology that determines the most cost-effective (least total cost) combination of energy conservation measures (ECMs) (insulation levels and window types) for residential buildings. This least-cost set of ECMs was used as a basis for proposing revised MEC maximum U{sub 0}-values (thermal transmittances). ECMs include window types (for example, double-pane vinyl) and insulation levels (for example, R-19) for ceilings, walls, and floors.

  9. Engineering evaluation/cost analysis for the proposed removal of contaminated materials at the Elza Gate site, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1991-06-01

    This engineering evaluation/cost analysis (EE/CA) has been prepared in support of the proposed removal action for cleanup of radioactive and chemically contaminated soil at the Elza Gate site in Oak Ridge, Tennessee. This property became contaminated as a result of storage of ore residues, equipment, and other materials for the US Atomic Energy Commission. The US Department of Energy is responsible for cleanup of portions of the site under its Formerly Utilized Sites Remedial Action Program. In December 1990 an area known as Pad 1 was abrasively scoured to remove surface contamination, and in March 1991 removal of Pad 1 contamination was begun under a separate EE/CA. This EE/CA is intended to cover the remaining portions of the site for which the Department of Energy has responsibility. It has been determined that an EE/CA report is appropriate documentation for the proposed removal action. This EE/CA covers removal of contaminated soils and contaminated concrete rubble from the Elza Gate site. The primary objectives of this EE/CA report are to identify and describe the preferred removal action, and to document the selection of response activities that will mitigate the potential for release of contaminants from the property into the environment and that will minimize the associated threats to human health or welfare and the environment. The preferred alternative is disposition on the Oak Ridge Reservation. 30 refs., 7 figs., 12 tabs

  10. A Proposal of a Method to Measure and Evaluate the Effect to Apply External Support Measures for Owners by Construction Management Method, etc

    Science.gov (United States)

    Tada, Hiroshi; Miyatake, Ichiro; Mouri, Junji; Ajiki, Norihiko; Fueta, Toshiharu

    In Japan, various approaches have been taken to ensure the quality of public works or to support the procurement regime of the governmental agencies, as a means to utilize external resources, which include the procurement support service or the construction management (CM) method. Although discussions on these measures to utilize external resources (hereinafter referred to as external support measure) have been going on, as well as the follow-up surveys showing the positive effects of such measures have been conducted, the surveys only deal with the matters concerning the overall effects of the external support measure on the whole, meaning that the effect of each item of the tasks have not been addressed, and that the extent it dealt with the expectations of the client is unknown. However, the effective use of the external support measure in future cannot be achieved without knowing what was the purpose to introduce the external support measure, and what effect was expected on each task item, and what extent the expectation fulfilled. Furthermore, it is important to clarify not only the effect as compared to the client's expectation (performance), but also the public benefit of this measure (value improvement). From this point of view, there is not an established method to figure out the effect of the client's measure to utilize external resources. In view of this background, this study takes the CM method as an example of the external support measure, and proposes a method to measure and evaluate the effect by each task item, and suggests the future issues and possible responses, in the aim of contributing the promotion, improvement, and proper implementation of the external support measures in future.

  11. Integrating risk analysis and multi-criteria decision support under uncertainty in electricity distribution system asset management

    International Nuclear Information System (INIS)

    Catrinu, M.D.; Nordgard, D.E.

    2011-01-01

    Asset managers in electricity distribution companies generally recognize the need and the challenge of adding structure and a higher degree of formal analysis into the increasingly complex asset management decisions. This implies improving the present asset management practice by making the best use of the available data and expert knowledge and by adopting new methods for risk analysis and decision support and nevertheless better ways to document the decisions made. This paper discusses methods for integrating risk analysis and multi-criteria decision support under uncertainty in electricity distribution system asset management. The focus is on how to include the different company objectives and risk analyses into a structured decision framework when deciding how to handle the physical assets of the electricity distribution network. This paper presents an illustrative example of decision support for maintenance and reinvestment strategies based, using expert knowledge, simplified risk analyses and multi-criteria decision analysis under uncertainty.

  12. Seeking support on facebook: a content analysis of breast cancer groups.

    Science.gov (United States)

    Bender, Jacqueline L; Jimenez-Marroquin, Maria-Carolina; Jadad, Alejandro R

    2011-02-04

    Social network sites have been growing in popularity across broad segments of Internet users, and are a convenient means to exchange information and support. Research on their use for health-related purposes is limited. This study aimed to characterize the purpose, use, and creators of Facebook groups related to breast cancer. We searched Facebook (www.Facebook.com) using the term breast cancer. We restricted our analysis to groups that were related to breast cancer, operated in English, and were publicly available. Two of us independently extracted information on the administrator and purpose of the group, as well as the number of user-generated contributions. We developed a coding scheme to guide content analysis. We found 620 breast cancer groups on Facebook containing a total of 1,090,397 members. The groups were created for fundraising (277/620, 44.7%), awareness (236, 38.1%), product or service promotion related to fundraising or awareness (61, 9%), or patient/caregiver support (46, 7%). The awareness groups as a whole contained by far the most members (n = 957,289). The majority of groups (532, 85.8%) had 25 wall posts or fewer. The support oriented groups, 47% (27/57) of which were established by high school or college students, were associated with the greatest number of user-generated contributions. Facebook groups have become a popular tool for awareness-raising, fundraising, and support-seeking related to breast cancer attracting over one million users. Given their popularity and reach, further research is warranted to explore the implications of social network sites as a health resource across various health conditions, cultures, ages, and socioeconomic groups.

  13. Engineering analysis activities in support of susquehanna unit 1 startup testing and cycle 1 operations

    International Nuclear Information System (INIS)

    Miller, G.D.; Kukielka, C.A.; Olson, L.M.; Refling, J.G.; Roscioli, A.J.; Somma, S.A.

    1985-01-01

    The engineering analysis group is responsible for all nuclear plant systems analysis and reactor analysis activities, excluding fuel management analysis, at Pennsylvania Power and Light Company. These activities include making pretest and posttest predictions of startup tests; analyzing unplanned or unexpected transient events; providing technical training to plant personnel; assisting in the development of emergency drill scenarios; providing engineering evaluations to support design and technical specification changes, and evaluating, assessing, and resolving a number of license conditions. Many of these activities have required the direct use of RETRAN models. Two RETRAN analyses that were completed to support plant operations - a pretest analysis of the turbine trip startup test, and a posttest analysis of the loss of startup transformer event - are investigated. For each case, RETRAN results are compared with available plant data and comparisons are drawn on the acceptability of the performance of the plant systems

  14. Dynamics Analysis of Unbalanced Motorized Spindles Supported on Ball Bearings

    Directory of Open Access Journals (Sweden)

    Junfeng Liu

    2016-01-01

    Full Text Available This paper presents an improved dynamic model for unbalanced high speed motorized spindles. The proposed model includes a Hertz contact force model which takes into the internal clearance and an unbalanced electromagnetic force model based on the energy of the air magnetic field. The nonlinear characteristic of the model is analysed by Lyapunov stability theory and numerical analysis to study the dynamic properties of the spindle system. Finally, a dynamic operating test is carried out on a DX100A-24000/20-type motorized spindle. The good agreement between the numerical solutions and the experimental data indicates that the proposed model is capable of accurately predicting the dynamic properties of motorized spindles. The influence of the unbalanced magnetic force on the system is studied, and the sensitivities of the system parameters to the critical speed of the system are obtained. These conclusions are useful for the dynamic design of high speed motorized spindles.

  15. On the development of LWR fuel analysis code (1). Analysis of the FEMAXI code and proposal of a new model

    International Nuclear Information System (INIS)

    Lemehov, Sergei; Suzuki, Motoe

    2000-01-01

    This report summarizes the review on the modeling features of FEMAXI code and proposal of a new theoretical equation model of clad creep on the basis of irradiation-induced microstructure change. It was pointed out that plutonium build-up in fuel matrix and non-uniform radial power profile at high burn-up affect significantly fuel behavior through the interconnected effects with such phenomena as clad irradiation-induced creep, fission gas release, fuel thermal conductivity degradation, rim porous band formation and associated fuel swelling. Therefore, these combined effects should be properly incorporated into the models of the FEMAXI code so that the code can carry out numerical analysis at the level of accuracy and elaboration that modern experimental data obtained in test reactors have. Also, the proposed new mechanistic clad creep model has a general formalism which allows the model to be flexibly applied for clad behavior analysis under normal operation conditions and power transients as well for Zr-based clad materials by the use of established out-of-pile mechanical properties. The model has been tested against experimental data, while further verification is needed with specific emphasis on power ramps and transients. (author)

  16. Volume 2. Probabilistic analysis of HTGR application studies. Supporting data

    International Nuclear Information System (INIS)

    1980-09-01

    Volume II, Probabilistic Analysis of HTGR Application Studies - Supporting Data, gives the detail data, both deterministic and probabilistic, employed in the calculation presented in Volume I. The HTGR plants and the fossil plants considered in the study are listed. GCRA provided the technical experts from which the data were obtained by MAC personnel. The names of the technical experts (interviewee) and the analysts (interviewer) are given for the probabilistic data

  17. Probabilitic analysis for fatigue failure of leg-supported liquid containers under random earthquake-type excitation

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1981-01-01

    Leg-supported cylindrical containers frequently used for nuclear power plants and chemical plants and leg-supported rectangular containers such as water and fuel tanks are the structures, of which the reliability is feared at the time of earthquakes. In this study, about such leg-supported liquid containers, the structural reliability of the system at the time of earthquakes was analyzed from the viewpoint of fatigue failure at the joints of tanks and supporting legs and the fixing parts of legs. The second order unsteady coupled probability density of response displacement and response velocity and the first and second order unsteady probability density of response displacement envelope were determined, then using the results, the expected value, variance and unsteady probability density of cumulative damage were obtained on the basis of Miner's law, thus the structural reliability of the system was analyzed. The result of analysis was verified with the results of vibration tests using many simulated earthquake waves, and the experiment of the fatigue failure of a model with sine wave vibration was carried out. The mechanical model for the analysis, the unsteady probability density described above, the analysis of structural reliability and the experiment are reported. (Kako, I.)

  18. Toward Personalized Vibrotactile Support When Learning Motor Skills

    Directory of Open Access Journals (Sweden)

    Olga C. Santos

    2017-01-01

    Full Text Available Personal tracking technologies allow sensing of the physical activity carried out by people. Data flows collected with these sensors are calling for big data techniques to support data collection, integration and analysis, aimed to provide personalized support when learning motor skills through varied multisensorial feedback. In particular, this paper focuses on vibrotactile feedback as it can take advantage of the haptic sense when supporting the physical interaction to be learnt. Despite each user having different needs, when providing this vibrotactile support, personalization issues are hardly taken into account, but the same response is delivered to each and every user of the system. The challenge here is how to design vibrotactile user interfaces for adaptive learning of motor skills. TORMES methodology is proposed to facilitate the elicitation of this personalized support. The resulting systems are expected to dynamically adapt to each individual user’s needs by monitoring, comparing and, when appropriate, correcting in a personalized way how the user should move when practicing a predefined movement, for instance, when performing a sport technique or playing a musical instrument.

  19. Strength analysis of support structure and characterization of prototype imaging portal monitor

    International Nuclear Information System (INIS)

    Khairul Handono; Alvano Yulian; Muhammad Awwaluddin

    2014-01-01

    The mechanical systems analysis and testing of control systems and data acquisition the prototype Portal Imaging Monitor Container has been conducted. Analysis of the mechanical system includes support holder important to maintain continuity of operations. While the analysis of the data acquisition system and electrically system done on the conveyor drive motor power supply. The purpose of the analysis and characterization for design improvements. The process of static analysis is done through a conveyor frame structure simulation in ANSYS 1.4 software. In the data acquisition system and the electrical system has been tested. From the results of the mechanical analysis showed that the design created has met the criteria of security and safety. While the data acquisition system testing the system can display the data through the Internet with either. (author)

  20. Support, shape and number of replicate samples for tree foliage analysis.

    Science.gov (United States)

    Luyssaert, Sebastiaan; Mertens, Jan; Raitio, Hannu

    2003-06-01

    Many fundamental features of a sampling program are determined by the heterogeneity of the object under study and the settings for the error (alpha), the power (beta), the effect size (ES), the number of replicate samples, and sample support, which is a feature that is often overlooked. The number of replicates, alpha, beta, ES, and sample support are interconnected. The effect of the sample support and its shape on the required number of replicate samples was investigated by means of a resampling method. The method was applied to a simulated distribution of Cd in the crown of a Salix fragilis L. tree. Increasing the dimensions of the sample support results in a decrease in the variance of the element concentration under study. Analysis of the variance is often the foundation of statistical tests, therefore, valid statistical testing requires the use of a fixed sample support during the experiment. This requirement might be difficult to meet in time-series analyses and long-term monitoring programs. Sample supports have their largest dimension in the direction with the largest heterogeneity, i.e. the direction representing the crown height, and this will give more accurate results than supports with other shapes. Taking the relationships between the sample support and the variance of the element concentrations in tree crowns into account provides guidelines for sampling efficiency in terms of precision and costs. In terms of time, the optimal support to test whether the average Cd concentration of the crown exceeds a threshold value is 0.405 m3 (alpha = 0.05, beta = 0.20, ES = 1.0 mg kg(-1) dry mass). The average weight of this support is 23 g dry mass, and 11 replicate samples need to be taken. It should be noted that in this case the optimal support applies to Cd under conditions similar to those of the simulation, but not necessarily all the examinations for this tree species, element, and hypothesis test.

  1. Evaluation of SOVAT: an OLAP-GIS decision support system for community health assessment data analysis.

    Science.gov (United States)

    Scotch, Matthew; Parmanto, Bambang; Monaco, Valerie

    2008-06-09

    Data analysis in community health assessment (CHA) involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS) enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture.On-Line Analytical Processing (OLAP) is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT) currently used by many public health professionals. SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS"). Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (alpha = .01) from SPSS-GIS for satisfaction and time (p OLAP-GIS decision support systems as a valuable tool for CHA data analysis.

  2. Trump proposes initial healthcare agenda

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2016-11-01

    Full Text Available No abstract available. Article truncated at 150 words. On Friday, November 11, President-elect Trump proposed a healthcare agenda on his website greatagain.gov (1. Yesterday, November 12, he gave an interview on 60 Minutes clarifying his positions (2. Trump said that he wanted to focus on healthcare and has proposed to: •Repeal all of the Affordable Care Act; •Allow the sale of health insurance across state lines; •Make the purchase of health insurance fully tax deductible; •Expand access to the health savings accounts;•Increase price transparency; •Block grant Medicaid; •Lower entrance barriers to new producers of drugs. In his 60 Minutes interview Trump reiterated that two provisions of the ACA – prohibition of pre-existing conditions exclusion and ability for adult children to stay on parents insurance plans until age 26 – have his support (2. Other aspects of the ACA that might receive his support were not discussed. On the Department of Veterans’ Affairs ...

  3. Thermal-Hydraulic Analysis Tasks for ANAV NPPs in Support of Plant Operation and Control

    Directory of Open Access Journals (Sweden)

    L. Batet

    2007-11-01

    Full Text Available Thermal-hydraulic analysis tasks aimed at supporting plant operation and control of nuclear power plants are an important issue for the Asociación Nuclear Ascó-Vandellòs (ANAV. ANAV is the consortium that runs the Ascó power plants (2 units and the Vandellòs-II power plant. The reactors are Westinghouse-design, 3-loop PWRs with an approximate electrical power of 1000 MW. The Technical University of Catalonia (UPC thermal-hydraulic analysis team has jointly worked together with ANAV engineers at different levels in the analysis and improvement of these reactors. This article is an illustration of the usefulness of computational analysis for operational support. The contents presented were operational between 1985 and 2001 and subsequently changed slightly following various organizational adjustments. The paper has two different parts. In the first part, it describes the specific aspects of thermal-hydraulic analysis tasks related to operation and control and, in the second part, it briefly presents the results of three examples of analyses that were performed. All the presented examples are related to actual situations in which the scenarios were studied by analysts using thermal-hydraulic codes and prepared nodalizations. The paper also includes a qualitative evaluation of the benefits obtained by ANAV through thermal-hydraulic analyses aimed at supporting operation and plant control.

  4. ANALYSIS AND COMPARISON OF EXISTING DECISION SUPPORT TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2016-01-01

    Full Text Available The article presents the results of an analytical review and comparison of the most common managerial decision support technologies: the analytic hierarchy method, neural networks, fuzzy set theory, genetic algorithms and neural-fuzzy modeling. The advantages and disadvantages of these approaches are shown. Determine the scope of their application. It is shown that the hierarchy analysis method works well with the full initial information, but due to the need for expert comparison of alternatives and the selection of evaluation criteria has a high proportion of subjectivity. For problems in the conditions of risk and uncertainty prediction seems reasonable use of the theory of fuzzy sets and neural networks. It is also considered technology collective decision applied both in the general election, and the group of experts. It reduces the time for conciliation meetings to reach a consensus by the preliminary analysis of all views submitted for the plane in the form of points. At the same time the consistency of opinion is determined by the distance between them.

  5. [Proposal of a conceptual method of supportive care for co-active patients].

    Science.gov (United States)

    Abidli, Yamine; Piette, Danielle; Casini, Annalisa

    2015-01-01

    There is a broad consensus on the importance for health professionals to support co-active patients. However, in practice, very few "patient care partnership" approaches have been developed. We hypothesized that the lack of investment in supporting patient care partnerships is due to the lack of interest in the skills needed by caregivers to provide such support. This paper intends to address thisgap. The patient care partnership method is studied, adapted and developed from existing models. It complements, harmonizes and integrates various schools of thought arising from the need to place the patient at the center of care and life in general. The patient care partnership method includes 7 stages during which the professional accompanies the patient through the process of care. The methodological approach for training professionals is designed to ensure that professionals experience the change as well as its difficulties of the change they expect from the patient in the care relationship. This method now needs to be validated by the experience of other professionals in order define the limits of application and to allow further development.

  6. Autism Spectrum Disorder: Does Neuroimaging Support the DSM-5 Proposal for a Symptom Dyad? A Systematic Review of Functional Magnetic Resonance Imaging and Diffusion Tensor Imaging Studies

    Science.gov (United States)

    Pina-Camacho, Laura; Villero, Sonia; Fraguas, David; Boada, Leticia; Janssen, Joost; Navas-Sanchez, Francisco J.; Mayoral, Maria; Llorente, Cloe; Arango, Celso; Parellada, Mara

    2012-01-01

    A systematic review of 208 studies comprising functional magnetic resonance imaging and diffusion tensor imaging data in patients with "autism spectrum disorder" (ASD) was conducted, in order to determine whether these data support the forthcoming DSM-5 proposal of a social communication and behavioral symptom dyad. Studies consistently reported…

  7. 77 FR 17479 - Star Pipe Products, Ltd.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2012-03-26

    ... FEDERAL TRADE COMMISSION [Docket No. 9351] Star Pipe Products, Ltd.; Analysis of Proposed Consent... ``Star Pipe, Docket No. 9351'' on your comment, and file your comment online at https://ftcpublic..., 2012. Write ``Star Pipe, Docket No. 9351'' on your comment. Your comment-- including your name and your...

  8. A conceptual knowledge-link model for supporting dental implant process

    OpenAIRE

    Szejka , Anderson Luis; Canciglieri , Osiris ,; Rudek , Marcelo; Panetto , Hervé

    2014-01-01

    International audience; Computer aided techniques widely used as diagnostic and surgical procedures tools are scarcely applied in implantology, which continues using visualization of CT images to define the parameters for dental implant process leaving to the dentist discretion the implant determination, since only the images analysis is non-deterministic. Thus, this research proposes the development of a knowledge-link model integrated to a reasoner system to support dental implant process t...

  9. U.S. Nuclear Regulatory Commission determination of proposed license fees for fiscal year 1977. References Federal Register No. 42 FR 22149

    International Nuclear Information System (INIS)

    1977-05-01

    Information is presented concerning the determination of average cost per man-year to maintain a professional employee for NRR, IE, NMSS, ACRS, ASLBP, and ASLAP; distribution of program direction and administration and program technical support costs; analysis of program support (contractual) costs for NRR, IE, and NMSS; added factor computation; NRC professional manpower required to conduct application reviews and health-and-safety and safeguards inspections; and determination of proposed fees

  10. Meta-analysis reveals evolution in invasive plant species but little support for Evolution of Increased Competitive Ability (EICA).

    Science.gov (United States)

    Felker-Quinn, Emmi; Schweitzer, Jennifer A; Bailey, Joseph K

    2013-03-01

    Ecological explanations for the success and persistence of invasive species vastly outnumber evolutionary hypotheses, yet evolution is a fundamental process in the success of any species. The Evolution of Increased Competitive Ability (EICA) hypothesis (Blossey and Nötzold 1995) proposes that evolutionary change in response to release from coevolved herbivores is responsible for the success of many invasive plant species. Studies that evaluate this hypothesis have used different approaches to test whether invasive populations allocate fewer resources to defense and more to growth and competitive ability than do source populations, with mixed results. We conducted a meta-analysis of experimental tests of evolutionary change in the context of EICA. In contrast to previous reviews, there was no support across invasive species for EICA's predictions regarding defense or competitive ability, although invasive populations were more productive than conspecific native populations under noncompetitive conditions. We found broad support for genetically based changes in defense and competitive plant traits after introduction into new ranges, but not in the manner suggested by EICA. This review suggests that evolution occurs as a result of plant introduction and population expansion in invasive plant species, and may contribute to the invasiveness and persistence of some introduced species.

  11. Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2010-05-01

    Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

  12. Dependability analysis of proposed I and C architecture for safety systems of a large PWR

    International Nuclear Information System (INIS)

    Kabra, Ashutosh; Karmakar, G.; Tiwari, A.P.; Manoj Kumar; Marathe, P.P.

    2014-01-01

    Instrumentation and Control (I and C) systems in a reactor provide protection against unsafe operation during steady-state and transient power operations. Indian reactors traditionally adopted 2-out-of-3 (2oo3) architecture for safety systems. But, contemporary reactor safety systems are employing 2-out-of-4 (2oo4) architecture in spite of the increased cost due to the additional channel. This motivated us to carry out a comparative study of 2oo3 and 2oo4 architecture, especially for their dependability attributes - safety and availability. Quantitative estimation of safety and availability has been used to adjudge the worthiness of adopting 2oo4 architecture in I and C safety systems of a large PWR. Our analysis using Markov model shows that 2oo4 architecture, even with lower diagnostic coverage and longer proof test interval, can provide better safety and availability in comparison of 2oo3 architecture. This reduces total life cycle cost of system during development phase and complexity and frequency of surveillance test during operational phase. The paper also describes the proposed architecture for Reactor Protection System (RPS), a representative safety system, and determines its dependability using Markov analysis and Failure Mode Effect Analysis (FMEA). The proposed I and C safety system architecture also has been qualitatively analyzed for their effectiveness against common cause failures (CCFs). (author)

  13. Novel carbon nanosheets as support for ultrahigh-resolution structural analysis of nanoparticles

    International Nuclear Information System (INIS)

    Nottbohm, Christoph T.; Beyer, Andre; Sologubenko, Alla S.; Ennen, Inga; Huetten, Andreas; Roesner, Harald; Eck, Wolfgang; Mayer, Joachim; Goelzhaeuser, Armin

    2008-01-01

    The resolution in transmission electron microscopy (TEM) has reached values as low as 0.08 nm. However, these values are not accessible for very small objects in the size range of a few nanometers or lower, as they have to be placed on some support, which contributes to the overall electron-scattering signal, thereby blurring the contrast. Here, we report on the use of nanosheets made from cross-linked aromatic self-assembled monolayers as TEM sample supports. When transferred onto a copper grid, a single 1.6-nm-thick nanosheet can cover the grid and is free standing within the micron-sized openings. Despite its thinness, the sheet is stable under the impact of the electron beam. Micrographs taken from nanoclusters onto these nanosheets show highly increased contrast in comparison to the images taken from amorphous carbon supports. In scanning transmission electron microscopy with nanosheet support, a size analysis of sub-nanometer Au clusters was performed and single Au atoms were resolved

  14. Supporting secure programming in web applications through interactive static analysis

    Science.gov (United States)

    Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

    2013-01-01

    Many security incidents are caused by software developers’ failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases. PMID:25685513

  15. Supporting secure programming in web applications through interactive static analysis

    Directory of Open Access Journals (Sweden)

    Jun Zhu

    2014-07-01

    Full Text Available Many security incidents are caused by software developers’ failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases.

  16. A New Proposal on Analysis of Artistic Creativity through Introspection

    Directory of Open Access Journals (Sweden)

    Pierre d’Argyll

    2013-06-01

    Full Text Available The genesis of the creative process in Art is currently conceived as the intellectual selection by the artist of fragments of memory from her/his personal, cultural and emotional experience. Interpretation of the artistic object has been systematically developed from an external perspective of art history, literature, and fine arts or of medicine and psychology. Recent neurological findings on the molecular nature of memory have revolutioned the knowledge of the mental process of memorization, remembrance and creative synthesis. A movement of scientists defends the necessity of new tools to access mental processes, inherently subjective, such as artistic creativity. In the light of those evidences, we propose a new approach to the artwork starting from a first-person analysis, namely introspection, which offers an interpretation of the genesis of the artwork from his/her own memory. The scientific, philosophical and social background on the neuropsychological processes guiding the creative activity is reviewed. Our purpose is to integrate the previous approaches from a wide multidisciplinary perspective, and to pose a new reflection on how the autobiographical and intertextual data from the artist are modeled in a dynamic way in the complex net of mental interactions up to reach the creation of an artwork, which highlights an original new vision on the reading of art. This insight from first-person analysis might complement and enrich other analyses external to the artist.

  17. NRC staff preliminary analysis of public comments on advance notice of proposed rulemaking on emergency planning

    International Nuclear Information System (INIS)

    Peabody, C.A.; Hickey, J.W.N.

    1980-01-01

    The Nuclear Regulatory Commission (NRC) published an advance notice of proposed rulemaking on emergency planning on July 17, 1979 (44 FR 41483). In October and November 1979, the NRC staff submitted several papers to the Commission related to the emergency planning rulemaking. One of these papers was a preliminary analysis of public comments received on the advance notice (SECY-79-591B, November 13, 1979). This document consists of the preliminary analysis as it was submitted to the Commission, with minor editorial changes

  18. Retention payoff-based cost per day open regression equations: Application in a user-friendly decision support tool for investment analysis of automated estrus detection technologies.

    Science.gov (United States)

    Dolecheck, K A; Heersche, G; Bewley, J M

    2016-12-01

    Assessing the economic implications of investing in automated estrus detection (AED) technologies can be overwhelming for dairy producers. The objectives of this study were to develop new regression equations for estimating the cost per day open (DO) and to apply the results to create a user-friendly, partial budget, decision support tool for investment analysis of AED technologies. In the resulting decision support tool, the end user can adjust herd-specific inputs regarding general management, current reproductive management strategies, and the proposed AED system. Outputs include expected DO, reproductive cull rate, net present value, and payback period for the proposed AED system. Utility of the decision support tool was demonstrated with an example dairy herd created using data from DairyMetrics (Dairy Records Management Systems, Raleigh, NC), Food and Agricultural Policy Research Institute (Columbia, MO), and published literature. Resulting herd size, rolling herd average milk production, milk price, and feed cost were 323 cows, 10,758kg, $0.41/kg, and $0.20/kg of dry matter, respectively. Automated estrus detection technologies with 2 levels of initial system cost (low: $5,000 vs. high: $10,000), tag price (low: $50 vs. high: $100), and estrus detection rate (low: 60% vs. high: 80%) were compared over a 7-yr investment period. Four scenarios were considered in a demonstration of the investment analysis tool: (1) a herd using 100% visual observation for estrus detection before adopting 100% AED, (2) a herd using 100% visual observation before adopting 75% AED and 25% visual observation, (3) a herd using 100% timed artificial insemination (TAI) before adopting 100% AED, and (4) a herd using 100% TAI before adopting 75% AED and 25% TAI. Net present value in scenarios 1 and 2 was always positive, indicating a positive investment situation. Net present value in scenarios 3 and 4 was always positive in combinations using a $50 tag price, and in scenario 4, the $5

  19. User`s manual of a support system for human reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yokobayashi, Masao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tamura, Kazuo

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user`s guide of the system. (author).

  20. Decision support systems for recovery of endangered species

    International Nuclear Information System (INIS)

    Armstrong, C.E.

    1995-01-01

    The listing of a species as endangered under the Endangered Species Act invokes a suite of responses to help improve conditions for the recovery of that species, to include identification of stressors contributing to population loss, decision analysis of the impacts of proposed recovery options, and implementation of optimal recovery measures. The ability of a decision support system to quantify inherent stressor uncertainties and to identify the key stressors that can be controlled or eliminated becomes key to ensuring the recovery of an endangered species. The listing of the Snake River sockeye, spring/summer chinook, and fall chinook salmon species in the Snake River as endangered provides a vivid example of the importance of sophisticated decision support systems. Operational and physical changes under consideration at eight of the hydroelectric dams along the Columbia and Lower Snake River pose significant financial impacts to a variety of stakeholders involved in the salmon population recovery process and carry significant uncertainties of outcome. A decision support system is presented to assist in the identification of optimal recovery actions for this example that includes the following: creation of datamarts of information on environmental, engineering, and ecological values that influence species survival; incorporation of decision analysis tools to determine optimal decision policies; and the use of geographic information systems (GIS) to provide a context for decision analysis and to communicate the impacts of decision policies

  1. Assessing Management Support for Worksite Health Promotion: Psychometric Analysis of the Leading by Example (LBE) Instrument

    Science.gov (United States)

    Della, Lindsay J.; DeJoy, David M.; Goetzel, Ron Z.; Ozminkowski, Ronald J.; Wilson, Mark G.

    2009-01-01

    Objective This paper describes the development of the Leading by Example (LBE) instrument. Methods Exploratory factor analysis was used to obtain an initial factor structure. Factor validity was evaluated using confirmatory factor analysis methods. Cronbach’s alpha and item-total correlations provided information on the reliability of the factor subscales. Results Four subscales were identified: business alignment with health promotion objectives; awareness of the health-productivity link; worksite support for health promotion; leadership support for health promotion. Factor by group comparisons revealed that the initial factor structure is effective in detecting differences in organizational support for health promotion across different employee groups Conclusions Management support for health promotion can be assessed using the LBE, a brief, self-report questionnaire. Researchers can use the LBE to diagnose, track, and evaluate worksite health promotion programs. PMID:18517097

  2. 76 FR 15311 - Legacy Learning Systems, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2011-03-21

    ... FEDERAL TRADE COMMISSION [File No. 102 3055] Legacy Learning Systems, Inc.; Analysis of Proposed... electronically or in paper form. Comments should refer to ``Legacy Learning Systems, File No. 102 3055'' to... it. A comment filed in paper form should include the ``Legacy Learning Systems, File No. 102 3055...

  3. 78 FR 55076 - Ganley Ford West, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2013-09-09

    ... FEDERAL TRADE COMMISSION [File No. 122 3269] Ganley Ford West, Inc.; Analysis of Proposed Consent... for Comment part of the SUPPLEMENTARY INFORMATION section below. Write ``Ganley Ford, File No. 122... receive it on or before October 3, 2013. Write ``Ganley Ford, File No. 122 3269'' on your comment. Your...

  4. A Two-Layer Least Squares Support Vector Machine Approach to Credit Risk Assessment

    Science.gov (United States)

    Liu, Jingli; Li, Jianping; Xu, Weixuan; Shi, Yong

    Least squares support vector machine (LS-SVM) is a revised version of support vector machine (SVM) and has been proved to be a useful tool for pattern recognition. LS-SVM had excellent generalization performance and low computational cost. In this paper, we propose a new method called two-layer least squares support vector machine which combines kernel principle component analysis (KPCA) and linear programming form of least square support vector machine. With this method sparseness and robustness is obtained while solving large dimensional and large scale database. A U.S. commercial credit card database is used to test the efficiency of our method and the result proved to be a satisfactory one.

  5. The concept of information support system for operational personnel of operating NPPs

    International Nuclear Information System (INIS)

    Dunaev, V.G.; Golovanov, V.V.

    1993-01-01

    The paper has been prepared on the materials of the concept developed by the order of ''Rosenergoatom'' concern. In the present paper the main definitions, the principal objectives and functions of the operator support system (OSS) are stated, a brief analysis of operation features of some existing operator information systems is presented, the main trends of development of operator information support system are given, the way and the sequence for implementation of the systems for operating NPPs are reviewed. In this proposed concept in the first place are considered the information support systems for the operators of the power unit main control rooms, however, the presented principles may be applied while designing information support systems for operators of other control rooms of NPP. 4 refs

  6. Use of safety analysis results to support process operation

    International Nuclear Information System (INIS)

    Karvonen, I.; Heino, P.

    1990-01-01

    Safety and risk analysis carried out during the design phase of a process plant produces useful knowledge about the behavior and the disturbances of the system. This knowledge, however, often remains to the designer though it would be of benefit to the operators and supervisors of the process plant, too. In Technical Research Centre of Finland a project has been started to plan and construct a prototype of an information system to make use of the analysis knowledge during the operation phase. The project belongs to a Nordic KRM project (Knowledge Based Risk Management System). The information system is planned to base on safety and risk analysis carried out during the design phase and completed with operational experience. The safety analysis includes knowledge about potential disturbances, their causes and consequences in the form of Hazard and Operability Study, faut trees and/or event trees. During the operation disturbances can however, occur, which are not included in the safety analysis, or the causes or consequences of which have been incompletely identified. Thus the information system must also have an interface for the documentation of the operational knowledge missing from the analysis results. The main tasks off the system when supporting the management of a disturbance are to identify it (or the most important of the coexistent ones) from the stored knowledge and to present it in a proper form (for example as a deviation graph). The information system may also be used to transfer knowledge from one shift to another and to train process personnel

  7. Analysis in usability evaluations

    DEFF Research Database (Denmark)

    Følstad, Asbjørn; Lai-Chong Law, Effie; Hornbæk, Kasper

    2010-01-01

    While the planning and implementation of usability evaluations are well described in the literature, the analysis of the evaluation data is not. We present interviews with 11 usability professionals on how they conduct analysis, describing the resources, collaboration, creation of recommendations......, and prioritization involved. The interviews indicate a lack of structure in the analysis process and suggest activities, such as generating recommendations, that are unsupported by existing methods. We discuss how to better support analysis, and propose four themes for future research on analysis in usability...

  8. A Case Study of Effective Support Working Resistance and Roof Support Technology in Thick Seam Fully-Mechanized Face Mining with Hard Roof Conditions

    Directory of Open Access Journals (Sweden)

    Wei-bin Guo

    2017-06-01

    Full Text Available This paper presents the engineering geological properties and roof control tecnology for a thick coal seam fully-mechanized face mining with hard roof conditions (THC at the Jinhuagong Coal Mine (JCM, northwest China. The effective support working resistance and appropriate roof control technology are two critical factors for safe and productive mining in the THC. The load-estimate-method (LOEM is the effective method to determine the support working resistance for normal working conditions (the mining height less than 3.5 m. In order to prevent support crushing accidents from happening and to ensure the safety and high-efficiency in the THC, the LOEM was modified based on the structure of the overlying strata in the THC. The strata which can form the voussoir beam structure in normal working conditions and will break in the form of cantilever beam in the THC is defined as the key strata in the immediate roof. Therefore, the hanging length of the key strata in the immediate roof was considered in the LOEM. Furthermore, a method for calculating the hanging length of the key strata in the immediate roof and its influencing factors were proposed using cantilever beam theory analysis of the structure of the overlying strata. Moreover, in order to fully fill the goaf area with caving roof to reduce the energy accumulation of main roof movement, it was decided to apply destress blasting technique (DEBT at the JCM to control the large hanging length of the hard roof, so as to reduce the impact of the hard main roof movement on the working face. The key technique parameters of the roof caving borehole were also proposed. The obtained results demonstrated that the theoretical analysis is reasonable, and the chosen support type and the DEBT could meet the roof control requirements. The THC has achieved safety and high-efficiency mining.

  9. Active damage detection method based on support vector machine and impulse response

    International Nuclear Information System (INIS)

    Taniguchi, Ryuta; Mita, Akira

    2004-01-01

    An active damage detection method was proposed to characterize damage in bolted joints. The purpose of this study is to propose a damage detection method that can obtain the detailed information of the damage by creating feature vectors for pattern recognition. In the proposed method, the wavelet transform is applied to the sensor signals, and the feature vectors are defined by second power average of the amplitude. The feature vectors generated by experiments were successfully used as the training data for Support Vector Machine (SVM). By applying the wavelet transform to time-frequency analysis, the accuracy of pattern recognition was raised in both correlation coefficient and SVM applications. Moreover, the SVM could identify the damage with very strong discernment capability than others. Applicability of the proposed method was successfully demonstrated. (author)

  10. Proposal of a Holistic Model to Support Local-Level Evidence-Based Practice

    Directory of Open Access Journals (Sweden)

    Said Shahtahmasebi

    2010-01-01

    Full Text Available In response to a central drive for evidence-based practice, there have been many research support schemes, setups, and other practices concentrating on facilitating access to external research, such as the Centre for Evidence Based Healthcare Aotearoa, the Cochrane Collaboration, and the York Centre for Reviews and Dissemination. Very little attention has been paid to supporting internal research in terms of local evidence and internal research capabilities. The whole evidence-based practice movement has alienated internal decision makers and, thus, very little progress has been made in the context of evidence informing local policy formation. Health and social policies are made centrally based on dubious claims and often evidence is sought after implementation. For example, on record, most health care practitioners appear to agree with the causal link between depression and mental illness (sometimes qualified with other social factors with suicide; off the record, even some psychiatrists doubt that such a link is applicable to the population as a whole. Therefore, be it through misplaced loyalty or a lack of support for internal researchers/decision makers, local evidence informing local decision making may have been ignored in favour of external evidence. In this paper, we present a practical holistic model to support local evidence-based decision making. This approach is more relevant in light of a new approach to primary health care of “local knowledge” complementing external evidence. One possible outcome would be to network with other regional programmes around the world to share information and identify “best” practices, such as the “Stop Youth Suicide Campaign”(www.stopyouthsuicide.com.

  11. Design of a Clinical Information Management System to Support DNA Analysis Laboratory Operation

    OpenAIRE

    Dubay, Christopher J.; Zimmerman, David; Popovich, Bradley

    1995-01-01

    The LabDirector system has been developed at the Oregon Health Sciences University to support the operation of our clinical DNA analysis laboratory. Through an iterative design process which has spanned two years, we have produced a system that is both highly tailored to a clinical genetics production laboratory and flexible in its implementation, to support the rapid growth and change of protocols and methodologies in use in the field. The administrative aspects of the system are integrated ...

  12. Framing of Uncertainty in Scientific Publications: Towards Recommendations for Decision Support

    Science.gov (United States)

    Guillaume, J. H. A.; Helgeson, C.; Elsawah, S.; Jakeman, A. J.; Kummu, M.

    2016-12-01

    Uncertainty is recognised as an essential issue in environmental decision making and decision support. As modellers, we notably use a variety of tools and techniques within an analysis, for example related to uncertainty quantification and model validation. We also address uncertainty by how we present results. For example, experienced modellers are careful to distinguish robust conclusions from those that need further work, and the precision of quantitative results is tailored to their accuracy. In doing so, the modeller frames how uncertainty should be interpreted by their audience. This is an area which extends beyond modelling to fields such as philosophy of science, semantics, discourse analysis, intercultural communication and rhetoric. We propose that framing of uncertainty deserves greater attention in the context of decision support, and that there are opportunities in this area for fundamental research, synthesis and knowledge transfer, development of teaching curricula, and significant advances in managing uncertainty in decision making. This presentation reports preliminary results of a study of framing practices. Specifically, we analyse the framing of uncertainty that is visible in the abstracts from a corpus of scientific articles. We do this through textual analysis of the content and structure of those abstracts. Each finding that appears in an abstract is classified according to the uncertainty framing approach used, using a classification scheme that was iteratively revised based on reflection and comparison amongst three coders. This analysis indicates how frequently the different framing approaches are used, and provides initial insights into relationships between frames, how the frames relate to interpretation of uncertainty, and how rhetorical devices are used by modellers to communicate uncertainty in their work. We propose initial hypotheses for how the resulting insights might influence decision support, and help advance decision making to

  13. A requirements specification for a software design support system

    Science.gov (United States)

    Noonan, Robert E.

    1988-01-01

    Most existing software design systems (SDSS) support the use of only a single design methodology. A good SDSS should support a wide variety of design methods and languages including structured design, object-oriented design, and finite state machines. It might seem that a multiparadigm SDSS would be expensive in both time and money to construct. However, it is proposed that instead an extensible SDSS that directly implements only minimal database and graphical facilities be constructed. In particular, it should not directly implement tools to faciliate language definition and analysis. It is believed that such a system could be rapidly developed and put into limited production use, with the experience gained used to refine and evolve the systems over time.

  14. Friendship networks of inner-city adults: a latent class analysis and multi-level regression of supporter types and the association of supporter latent class membership with supporter and recipient drug use.

    Science.gov (United States)

    Bohnert, Amy S B; German, Danielle; Knowlton, Amy R; Latkin, Carl A

    2010-03-01

    Social support is a multi-dimensional construct that is important to drug use cessation. The present study identified types of supportive friends among the social network members in a community-based sample and examined the relationship of supporter-type classes with supporter, recipient, and supporter-recipient relationship characteristics. We hypothesized that the most supportive network members and their support recipients would be less likely to be current heroin/cocaine users. Participants (n=1453) were recruited from low-income neighborhoods with a high prevalence of drug use. Participants identified their friends via a network inventory, and all nominated friends were included in a latent class analysis and grouped based on their probability of providing seven types of support. These latent classes were included as the dependent variable in a multi-level regression of supporter drug use, recipient drug use, and other characteristics. The best-fitting latent class model identified five support patterns: friends who provided Little/No Support, Low/Moderate Support, High Support, Socialization Support, and Financial Support. In bivariate models, friends in the High, Low/Moderate, and Financial Support were less likely to use heroin or cocaine and had less conflict with and were more trusted by the support recipient than friends in the Low/No Support class. Individuals with supporters in those same support classes compared to the Low/No Support class were less likely to use heroin or cocaine, or to be homeless or female. Multivariable models suggested similar trends. Those with current heroin/cocaine use were less likely to provide or receive comprehensive support from friends. Published by Elsevier Ireland Ltd.

  15. Ontology-supported research on vaccine efficacy, safety and integrative biological networks.

    Science.gov (United States)

    He, Yongqun

    2014-07-01

    While vaccine efficacy and safety research has dramatically progressed with the methods of in silico prediction and data mining, many challenges still exist. A formal ontology is a human- and computer-interpretable set of terms and relations that represent entities in a specific domain and how these terms relate to each other. Several community-based ontologies (including Vaccine Ontology, Ontology of Adverse Events and Ontology of Vaccine Adverse Events) have been developed to support vaccine and adverse event representation, classification, data integration, literature mining of host-vaccine interaction networks, and analysis of vaccine adverse events. The author further proposes minimal vaccine information standards and their ontology representations, ontology-based linked open vaccine data and meta-analysis, an integrative One Network ('OneNet') Theory of Life, and ontology-based approaches to study and apply the OneNet theory. In the Big Data era, these proposed strategies provide a novel framework for advanced data integration and analysis of fundamental biological networks including vaccine immune mechanisms.

  16. Proposed underground gasification. [United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    An underground coal gasification experiment which could provide the key to recovering the energy in millions of tonnes of otherwise inaccessible undersea coal reserves is proposed by the NCB. The Board's Headquarters Technical Department hope to carry out a field trial in a six foot thick coal seam about 2000 feet beneath a former wartime airfield near the hamlet of Ossington near Newark, Notts, UK. This paper describes briefly the proposed project, which could cost up to 15 million pounds over five years. It has the backing and financial support of the European Economic Community.

  17. Developing an online support tool to assist students in higher education with project proposals

    OpenAIRE

    Haji Suhaili, Wida Susanty

    2015-01-01

    The research presented in this thesis investigates ways to assist students with writing their project proposals. There is limited literature on the problems students have when writing project proposals in Higher Education. Particularly most of the literature has concentrated on the writing aspects, rhetorical aspects and structure of a scientific article. Even though various studies on assessment of undergraduate individual and group project works have been done, the project pr...

  18. A Wavelet Support Vector Machine Combination Model for Singapore Tourist Arrival to Malaysia

    Science.gov (United States)

    Rafidah, A.; Shabri, Ani; Nurulhuda, A.; Suhaila, Y.

    2017-08-01

    In this study, wavelet support vector machine model (WSVM) is proposed and applied for monthly data Singapore tourist time series prediction. The WSVM model is combination between wavelet analysis and support vector machine (SVM). In this study, we have two parts, first part we compare between the kernel function and second part we compare between the developed models with single model, SVM. The result showed that kernel function linear better than RBF while WSVM outperform with single model SVM to forecast monthly Singapore tourist arrival to Malaysia.

  19. 24 CFR 941.606 - Proposal.

    Science.gov (United States)

    2010-04-01

    ...) Life cycle analysis. For new construction and substantial rehabilitation, the criteria to be used in equipping the proposed development with heating and cooling systems, which shall include a life-cycle cost... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Proposal. 941.606 Section 941.606...

  20. Comparative analysis of stress in a new proposal of dental implants.

    Science.gov (United States)

    Valente, Mariana Lima da Costa; de Castro, Denise Tornavoi; Macedo, Ana Paula; Shimano, Antonio Carlos; Dos Reis, Andréa Cândido

    2017-08-01

    The purpose of this study was to compare, through photoelastic analysis, the stress distribution around conventional and modified external hexagon (EH) and morse taper (MT) dental implant connections. Four photoelastic models were prepared (n=1): Model 1 - conventional EH cylindrical implant (Ø 4.0mm×11mm - Neodent®), Model 2 - modified EH cylindrical implant, Model 3 - conventional MT Conical implant (Ø 4.3mm×10mm - Neodent®) and Model 4 - modified MT conical implant. 100 and 150N axial and oblique loads (30° tilt) were applied in the devices coupled to the implants. A plane transmission polariscope was used in the analysis of fringes and each position of interest was recorded by a digital camera. The Tardy method was used to quantify the fringe order (n), that calculates the maximum shear stress (τ) value in each selected point. The results showed lower stress concentration in the modified cylindrical implant (EH) compared to the conventional model, with application of 150N axial and 100N oblique loads. Lower stress was observed for the modified conical (MT) implant with the application of 100 and 150N oblique loads, which was not observed for the conventional implant model. The comparative analysis of the models showed that the new design proposal generates good stress distribution, especially in the cervical third, suggesting the preservation of bone tissue in the bone crest region. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. A Proposed Functional Abilities Classification Tool for Developmental Disorders Affecting Learning and Behaviour

    Directory of Open Access Journals (Sweden)

    Benjamin Klein

    2018-02-01

    Full Text Available Children with developmental disorders affecting learning and behaviour (DDALB (e.g., attention, social communication, language, and learning disabilities, etc. require individualized support across multiple environments to promote participation, quality of life, and developmental outcomes. Support to enhance participation is based largely on individual profiles of functioning (e.g., communication, cognitive, social skills, executive functioning, etc., which are highly heterogeneous within medical diagnoses. Currently educators, clinicians, and parents encounter widespread difficulties in meeting children’s needs as there is lack of universal classification of functioning and disability for use in school environments. Objective: a practical tool for functional classification broadly applicable for children with DDALB could facilitate the collaboration, identification of points of entry of support, individual program planning, and reassessment in a transparent, equitable process based on functional need and context. We propose such a tool, the Functional Abilities Classification Tool (FACT based on the concepts of the ICF (International Classification of Functioning, Disability and Health. FACT is intended to provide ability and participation classification that is complementary to medical diagnosis. For children presenting with difficulties, the proposed tool initially classifies participation over several environments. Then, functional abilities are classified and personal factors and environment are described. Points of entry for support are identified given an analysis of functional ability profile, personal factors, environmental features, and pattern of participation. Conclusion: case examples, use of the tool and implications for children, agencies, and the system are described.

  2. Positive Behavior Support: A Proposal for Updating and Refining the Definition

    Science.gov (United States)

    Kincaid, Don; Dunlap, Glen; Kern, Lee; Lane, Kathleen Lynne; Bambara, Linda M.; Brown, Fredda; Fox, Lise; Knoster, Timothy P.

    2016-01-01

    Positive behavior support (PBS) has been a dynamic and growing enterprise for more than 25 years. During this period, PBS has expanded applications across a wide range of populations and multiple levels of implementation. As a result, there have been understandable inconsistencies and confusion regarding the definition of PBS. In this essay, we…

  3. THE ULTIMATE STATE CONCEPT APPLIED TO TUNNEL SUPPORT

    Directory of Open Access Journals (Sweden)

    Mladen Hudec

    2000-12-01

    Full Text Available The most questionable are the values of pressures between rock and support resulting from common deformations on the contact area between rock and support. Therefore the modelling and design of the tunnel support is not reliable, if it is based on active rock pressure resulting from this common deformations. The inversion of the design procedure is proposed. Instead of the active extreme pressure of the rock on support, the influence of ultimate reaction of the support on the rock has to be analysed. This procedure can be performed using the ultimate load principle, as proposed by Eurocodc 7 (Geotechnies. Normally, the rock has the tendency to increase the common conver¬gence until the support reaches its ultimate state. So, loading of profile boundary with the ultimate possible reaction of the support is very plausible. The reactive support pressures have to be probable and itself in equilibrium. The ultimate reactive load has to be reduced by Euro-code safety factor for structural elements and applied on the rock with given properties, or alternatively (as proposed by Eurocode 7 the soil or rock properties have to be diminished and calculated with full ultimate support pressures. If the rock with given (or proposed pro¬perties and loaded with ultimate reactive pressures resulting from supposed support, satisfy its failure criterion, then is the compound system support-rock verificatcd. By this procedure, the number of relevant material properties is reduce to the primary stress ratio and the constants defining the failure criterion. The verification can be performed by any of numerical methods, but we prefer here used boundary elements method (the paper is published in Croatian.

  4. Analysis of AHWR downcomer piping supported on elastoplastic dampers and subjected to normal and earthquake loadings

    International Nuclear Information System (INIS)

    Dubey, P.N.; Reddy, G.R.; Vaze, K.K.; Ghosh, A.K.

    2010-05-01

    Three layouts have been considered for AHWR downcomer for codal qualification in order to ensure its structural integrity under normal and occasional loads. In addition to codal qualification a good piping layout should have less number of bends and weld joints in order to reduce the in-service inspection cost. Less number of bends will reduce the pressure drop in natural circulation and lesser number of weld joints will reduce the total time of in-service inspection that finally reduces the radiation dose to the workers. Conventional seismic design approach of piping with snubbers leads to high cost, maintenance and possible locking causing undue higher thermal stress during normal operation. New seismic supports in the form of Elasto-Plastic Damper (EPD) are the best suited for nuclear piping because of their simple design, low cost, passive nature and ease in installation. In this report the characteristics of EPD obtained from theory, finite element analysis and tests have been presented and comparison has also been made among the three. Analysis method and code qualification of AHWR downcomer piping considering the loadings due to normal operating and occasional loads such as earthquake have been discussed in detail. This report also explains the concept of single support and multi-support response spectrum analysis methods. The results obtained by using both types of supports i.e. conventional and EPD supports have been compared and use of EPD supports in AHWR downcomer pipe is recommended. (author)

  5. Canonical correlation analysis of professional stress,social support,and professional burnout among low-rank army officers

    Directory of Open Access Journals (Sweden)

    Chuan-yun LI

    2011-12-01

    Full Text Available Objective The present study investigates the influence of professional stress and social support on professional burnout among low-rank army officers.Methods The professional stress,social support,and professional burnout scales among low-rank army officers were used as test tools.Moreover,the officers of established units(battalion,company,and platoon were chosen as test subjects.Out of the 260 scales sent,226 effective scales were received.The descriptive statistic and canonical correlation analysis models were used to analyze the influence of each variable.Results The scores of low-rank army officers in the professional stress,social support,and professional burnout scales were more than average,except on two factors,namely,interpersonal support and de-individualization.The canonical analysis identified three groups of canonical correlation factors,of which two were up to a significant level(P < 0.001.After further eliminating the social support variable,the canonical correlation analysis of professional stress and burnout showed that the canonical correlation coefficients P corresponding to 1 and 2 were 0.62 and 0.36,respectively,and were up to a very significant level(P < 0.001.Conclusion The low-rank army officers experience higher professional stress and burnout levels,showing a lower sense of accomplishment,emotional exhaustion,and more serious depersonalization.However,social support can reduce the onset and seriousness of professional burnout among these officers by lessening pressure factors,such as career development,work features,salary conditions,and other personal factors.

  6. 75 FR 56995 - Procurement List Proposed Additions and Deletion

    Science.gov (United States)

    2010-09-17

    ... Additions and Deletion AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed Additions to and Deletion From the Procurement List. SUMMARY: The Committee is proposing to add... aggregated by the Defense Logistics Agency Troop Support, Philadelphia, PA. Deletion Regulatory Flexibility...

  7. Experimental testing and theoretical analysis of samples of a divertor plate proposed for NET

    International Nuclear Information System (INIS)

    Brossa, F.; Federici, G.; Renda, V.; Papa, L.

    1986-01-01

    This paper presents the JRC-Ispra effort to support the design of a divertor concept for future reactors. The reference frame used in this work, i.e. divertor geometry and wall loading, is that of the NET (Next European Torus) reactor, which constitutes the European collaboration in the fusion reactor technology Program. Because of its main function of plasma impurity control, the divertor is submitted to high thermal fluxes, severe sputtering rates and electromagnetic forces. The present proposal for the divertor plate is the following: 1) W-5Re for the armour; 2) Cu for the heat sink. This choice is due to the low sputtering rate and favourable high temperature mechanical properties of the W-5Re, and the high thermal conductivity of copper

  8. Bridging Human Reliability Analysis and Psychology, Part 2: A Cognitive Framework to Support HRA

    Energy Technology Data Exchange (ETDEWEB)

    April M. Whaley; Stacey M. L. Hendrickson; Ronald L. Boring; Jing Xing

    2012-06-01

    This is the second of two papers that discuss the literature review conducted as part of the U.S. Nuclear Regulatory Commission (NRC) effort to develop a hybrid human reliability analysis (HRA) method in response to Staff Requirements Memorandum (SRM) SRM-M061020. This review was conducted with the goal of strengthening the technical basis within psychology, cognitive science and human factors for the hybrid HRA method being proposed. An overview of the literature review approach and high-level structure is provided in the first paper, whereas this paper presents the results of the review. The psychological literature review encompassed research spanning the entirety of human cognition and performance, and consequently produced an extensive list of psychological processes, mechanisms, and factors that contribute to human performance. To make sense of this large amount of information, the results of the literature review were organized into a cognitive framework that identifies causes of failure of macrocognition in humans, and connects those proximate causes to psychological mechanisms and performance influencing factors (PIFs) that can lead to the failure. This cognitive framework can serve as a tool to inform HRA. Beyond this, however, the cognitive framework has the potential to also support addressing human performance issues identified in Human Factors applications.

  9. Not addressing the root cause: An analysis of submissions made to the South Australian Government on a Proposal to Protect Midwifery Practice.

    Science.gov (United States)

    Rigg, Elizabeth; Schmied, Virginia; Peters, Kath; Dahlen, Hannah

    2015-06-01

    Reports of unregulated birth workers attending birth at home, with no registered midwife in attendance (freebirth), have become more frequent in Australia in recent years. A Coronial Inquiry (2012) into the deaths of three babies born at home in South Australia resulted in a call for legislation to restrict the practice of midwifery to registered midwives. A Proposal to Protect Midwifery Practice in South Australia was issued as a consultation paper in January 2013. To report the views of those making a submission to the Proposal to Protect Midwifery Practice in South Australia. Thirty submissions to the South Australian Government were downloaded, read and thematically analysed. Twenty-five (81%) submissions supported the legislation, 5 (16%) opposed it and 2 (6%) were neither for nor against. Support for the proposed legislation was strong, however the underlying root causes that have led to the rise of UBWs attending homebirth in Australia were not addressed. Recommendations called for all stakeholders to work with women to develop a better framework of care that respected and met their needs and choices whilst safeguarding maternal and neonatal health. The Proposal to Protect Midwifery Practice may promote greater protection of midwifery practice however, Private Indemnity Insurance (PII), collaborative agreements and power struggles associated with the medical domination of childbirth continue to marginalise homebirth and prevent women from accessing the care they want and need. These unresolved issues represent the root causes for UBWs attending homebirth; hence the proposal is only a partial solution. Copyright © 2014 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  10. A Text-Mining Framework for Supporting Systematic Reviews.

    Science.gov (United States)

    Li, Dingcheng; Wang, Zhen; Wang, Liwei; Sohn, Sunghwan; Shen, Feichen; Murad, Mohammad Hassan; Liu, Hongfang

    2016-11-01

    Systematic reviews (SRs) involve the identification, appraisal, and synthesis of all relevant studies for focused questions in a structured reproducible manner. High-quality SRs follow strict procedures and require significant resources and time. We investigated advanced text-mining approaches to reduce the burden associated with abstract screening in SRs and provide high-level information summary. A text-mining SR supporting framework consisting of three self-defined semantics-based ranking metrics was proposed, including keyword relevance, indexed-term relevance and topic relevance. Keyword relevance is based on the user-defined keyword list used in the search strategy. Indexed-term relevance is derived from indexed vocabulary developed by domain experts used for indexing journal articles and books. Topic relevance is defined as the semantic similarity among retrieved abstracts in terms of topics generated by latent Dirichlet allocation, a Bayesian-based model for discovering topics. We tested the proposed framework using three published SRs addressing a variety of topics (Mass Media Interventions, Rectal Cancer and Influenza Vaccine). The results showed that when 91.8%, 85.7%, and 49.3% of the abstract screening labor was saved, the recalls were as high as 100% for the three cases; respectively. Relevant studies identified manually showed strong topic similarity through topic analysis, which supported the inclusion of topic analysis as relevance metric. It was demonstrated that advanced text mining approaches can significantly reduce the abstract screening labor of SRs and provide an informative summary of relevant studies.

  11. Mechanisms underpinning effective peer support: a qualitative analysis of interactions between expert peers and patients newly-diagnosed with bipolar disorder

    Directory of Open Access Journals (Sweden)

    Proudfoot Judith G

    2012-11-01

    Full Text Available Abstract Background The increasing burden on mental health services has led to the growing use of peer support in psychological interventions. Four theoretical mechanisms have been proposed to underpin effective peer support: advice grounded in experiential knowledge, social support, social comparison and the helper therapy principle. However, there has been a lack of studies examining whether these mechanisms are also evident in clinical populations in which interpersonal dysfunction is common, such as bipolar disorder. Method This qualitative study, conducted alongside a randomized controlled trial, examined whether the four mechanisms proposed to underpin effective peer support were expressed in the email exchange between 44 individuals newly-diagnosed with bipolar disorder and their Informed Supporters (n = 4, over the course of a supported online psychoeducation program for bipolar disorder. A total of 104 text segments were extracted and coded. The data were complemented by face-to-face interviews with three of the four Informed Supporters who participated in the study. Results Qualitative analyses of the email interchange and interview transcripts revealed rich examples of all four mechanisms. The data illustrated how the involvement of Informed Supporters resulted in numerous benefits for the newly-diagnosed individuals, including the provision of practical strategies for illness management as well as emotional support throughout the intervention. The Informed Supporters encouraged the development of positive relationships with mental health services, and acted as role models for treatment adherence. The Informed Supporters themselves reported gaining a number of benefits from helping, including a greater sense of connectedness with the mental health system, as well as a broader knowledge of illness management strategies. Conclusions Examples of the mechanisms underpinning effective peer support were found in the sample of emails from

  12. A Proposal of Estimation Methodology to Improve Calculation Efficiency of Sampling-based Method in Nuclear Data Sensitivity and Uncertainty Analysis

    International Nuclear Information System (INIS)

    Song, Myung Sub; Kim, Song Hyun; Kim, Jong Kyung; Noh, Jae Man

    2014-01-01

    The uncertainty with the sampling-based method is evaluated by repeating transport calculations with a number of cross section data sampled from the covariance uncertainty data. In the transport calculation with the sampling-based method, the transport equation is not modified; therefore, all uncertainties of the responses such as k eff , reaction rates, flux and power distribution can be directly obtained all at one time without code modification. However, a major drawback with the sampling-based method is that it requires expensive computational load for statistically reliable results (inside confidence level 0.95) in the uncertainty analysis. The purpose of this study is to develop a method for improving the computational efficiency and obtaining highly reliable uncertainty result in using the sampling-based method with Monte Carlo simulation. The proposed method is a method to reduce the convergence time of the response uncertainty by using the multiple sets of sampled group cross sections in a single Monte Carlo simulation. The proposed method was verified by estimating GODIVA benchmark problem and the results were compared with that of conventional sampling-based method. In this study, sampling-based method based on central limit theorem is proposed to improve calculation efficiency by reducing the number of repetitive Monte Carlo transport calculation required to obtain reliable uncertainty analysis results. Each set of sampled group cross sections is assigned to each active cycle group in a single Monte Carlo simulation. The criticality uncertainty for the GODIVA problem is evaluated by the proposed and previous method. The results show that the proposed sampling-based method can efficiently decrease the number of Monte Carlo simulation required for evaluate uncertainty of k eff . It is expected that the proposed method will improve computational efficiency of uncertainty analysis with sampling-based method

  13. Product Quality Modelling Based on Incremental Support Vector Machine

    International Nuclear Information System (INIS)

    Wang, J; Zhang, W; Qin, B; Shi, W

    2012-01-01

    Incremental Support vector machine (ISVM) is a new learning method developed in recent years based on the foundations of statistical learning theory. It is suitable for the problem of sequentially arriving field data and has been widely used for product quality prediction and production process optimization. However, the traditional ISVM learning does not consider the quality of the incremental data which may contain noise and redundant data; it will affect the learning speed and accuracy to a great extent. In order to improve SVM training speed and accuracy, a modified incremental support vector machine (MISVM) is proposed in this paper. Firstly, the margin vectors are extracted according to the Karush-Kuhn-Tucker (KKT) condition; then the distance from the margin vectors to the final decision hyperplane is calculated to evaluate the importance of margin vectors, where the margin vectors are removed while their distance exceed the specified value; finally, the original SVs and remaining margin vectors are used to update the SVM. The proposed MISVM can not only eliminate the unimportant samples such as noise samples, but also can preserve the important samples. The MISVM has been experimented on two public data and one field data of zinc coating weight in strip hot-dip galvanizing, and the results shows that the proposed method can improve the prediction accuracy and the training speed effectively. Furthermore, it can provide the necessary decision supports and analysis tools for auto control of product quality, and also can extend to other process industries, such as chemical process and manufacturing process.

  14. Information Operations - Analysis Support and Capability Requirements (Operations d'information - Soutien a l'analyse et exigences de capacites) (CD-ROM)

    National Research Council Canada - National Science Library

    2006-01-01

    ...: The focus of the study "Information Operations - Analysis Support and Capability Requirements" undertaken by the RTO Task Group SAS-057 was to provide recommendations to improve analysis support...

  15. WTO disciplines on agricultural support: Experience to date and assessment of Doha proposals

    OpenAIRE

    Orden, David; Blandford, David; Josling, Timothy Edward; Brink, Lars

    2011-01-01

    When the World Trade Organization (WTO) was created in 1995, its members committed themselves to a set of disciplines for domestic support, market access, and export competition for agriculture. The Agreement on Agriculture laid the way for the pursuit of progressive reductions in world agricultural market distortions. Its supporters hoped the new rules and commitments would encourage countries to move domestic farm policies in a less trade-distorting direction. This research brief examines t...

  16. 14 CFR 204.4 - Carriers proposing to provide essential air service.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Carriers proposing to provide essential air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS Filing Requirements § 204.4 Carriers proposing to provide essential air service. Applicants proposing to provide essential air...

  17. CONTENT ANALYSIS, DISCOURSE ANALYSIS, AND CONVERSATION ANALYSIS: PRELIMINARY STUDY ON CONCEPTUAL AND THEORETICAL METHODOLOGICAL DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Anderson Tiago Peixoto Gonçalves

    2016-08-01

    Full Text Available This theoretical essay aims to reflect on three models of text interpretation used in qualitative research, which is often confused in its concepts and methodologies (Content Analysis, Discourse Analysis, and Conversation Analysis. After the presentation of the concepts, the essay proposes a preliminary discussion on conceptual and theoretical methodological differences perceived between them. A review of the literature was performed to support the conceptual and theoretical methodological discussion. It could be verified that the models have differences related to the type of strategy used in the treatment of texts, the type of approach, and the appropriate theoretical position.

  18. Automated valve fault detection based on acoustic emission parameters and support vector machine

    Directory of Open Access Journals (Sweden)

    Salah M. Ali

    2018-03-01

    Full Text Available Reciprocating compressors are one of the most used types of compressors with wide applications in industry. The most common failure in reciprocating compressors is always related to the valves. Therefore, a reliable condition monitoring method is required to avoid the unplanned shutdown in this category of machines. Acoustic emission (AE technique is one of the effective recent methods in the field of valve condition monitoring. However, a major challenge is related to the analysis of AE signal which perhaps only depends on the experience and knowledge of technicians. This paper proposes automated fault detection method using support vector machine (SVM and AE parameters in an attempt to reduce human intervention in the process. Experiments were conducted on a single stage reciprocating air compressor by combining healthy and faulty valve conditions to acquire the AE signals. Valve functioning was identified through AE waveform analysis. SVM faults detection model was subsequently devised and validated based on training and testing samples respectively. The results demonstrated automatic valve fault detection model with accuracy exceeding 98%. It is believed that valve faults can be detected efficiently without human intervention by employing the proposed model for a single stage reciprocating compressor. Keywords: Condition monitoring, Faults detection, Signal analysis, Acoustic emission, Support vector machine

  19. Network analysis of metaphors in immigrants' accounts of techno-science: A theoretical-methodological proposal.

    Directory of Open Access Journals (Sweden)

    Jesús René Luna Hernández

    2008-05-01

    Full Text Available Immigration is currently a source of much, sometimes divisive, social debate. However, what the immigrants themselves have to say about their own situation often goes unreported. One of the least-studied aspects of immigration is the immigrant's relationship with new information and communication technologies (ICTs. Here I suggest, as a project for investigation, the analysis of the metaphors that immigrants (from sub-Saharan Africa to Spain use to represent ICTs and the practices that surround them. These immigrants are of special interest because they come from places where contact with ICTs is minimal, and also because the jobs they find on arrival in Spain tend not to involve the use of ICTs. I propose the adoption of a perspective in which context and social relationships take precedence over individualistic factors, such as attitudes or attributions. I argue that social network analysis, and more specifically, discursive network analysis, is the investigative strategy most appropriate to such a project.

  20. Cost-effectiveness Analysis of Nutritional Support for the Prevention of Pressure Ulcers in High-Risk Hospitalized Patients.

    Science.gov (United States)

    Tuffaha, Haitham W; Roberts, Shelley; Chaboyer, Wendy; Gordon, Louisa G; Scuffham, Paul A

    2016-06-01

    To evaluate the cost-effectiveness of nutritional support compared with standard care in preventing pressure ulcers (PrUs) in high-risk hospitalized patients. An economic model using data from a systematic literature review. A meta-analysis of randomized controlled trials on the efficacy of nutritional support in reducing the incidence of PrUs was conducted. Modeled cohort of hospitalized patients at high risk of developing PrUs and malnutrition simulated during their hospital stay and up to 1 year. Standard care included PrU prevention strategies, such as redistribution surfaces, repositioning, and skin protection strategies, along with standard hospital diet. In addition to the standard care, the intervention group received nutritional support comprising patient education, nutrition goal setting, and the consumption of high-protein supplements. The analysis was from a healthcare payer perspective. Key outcomes of the model included the average costs and quality-adjusted life years. Model results were tested in univariate sensitivity analyses, and decision uncertainty was characterized using a probabilistic sensitivity analysis. Compared with standard care, nutritional support was cost saving at AU $425 per patient and marginally more effective with an average 0.005 quality-adjusted life years gained. The probability of nutritional support being cost-effective was 87%. Nutritional support to prevent PrUs in high-risk hospitalized patients is cost-effective with substantial cost savings predicted. Hospitals should implement the recommendations from the current PrU practice guidelines and offer nutritional support to high-risk patients.

  1. Synergy of image analysis for animal and human neuroimaging supports translational research on drug abuse

    Directory of Open Access Journals (Sweden)

    Guido eGerig

    2011-10-01

    Full Text Available The use of structural magnetic resonance imaging (sMRI and diffusion tensor imaging (DTI in animals models of neuropathology is of increasing interest to the neuroscience community. In this work, we present our approach to create optimal translational studies that include both animal and human neuroimaging data within the frameworks of a study of postnatal neuro-development in intra-uterine cocaine exposure. We propose the use of non-invasive neuroimaging to study developmental brain structural and white matter pathway abnormalities via sMRI and DTI, as advanced MR imaging technology is readily available and automated image analysis methodology have recently been transferred from the human to animal imaging setting. For this purpose, we developed a synergistic, parallel approach to imaging and image analysis for the human and the rodent branch of our study. We propose an equivalent design in both the selection of the developmental assessment stage and the neuroimaging setup. This approach brings significant advantages to study neurobiological features of early brain development that are common to animals and humans but also preserve analysis capabilities only possible in animal research. This paper presents the main framework and individual methods for the proposed cross-species study design, as well as preliminary DTI cross-species comparative results in the intra-uterine cocaine exposure study.

  2. A modified CCFS approach for the seismic analysis of multiply supported MDOF secondary systems

    International Nuclear Information System (INIS)

    Saudy, A.; Ghobarah, A.; Aziz, T.S.

    1992-01-01

    An alternative technique has been developed to evaluate the ordinates of the Cross Cross Floor Spectra (CCFS). The technique properly accounts for the dynamic interaction, tuning and non-classical damping characters of the combined Primary-Secondary (P-S) systems. The approach is able to estimate the peak response of the tuned non-classically damped P-S systems more accurately. In the analysis, two fictions oscillators are attached to the primary system in the course of evaluating the ordinates rather than attaching only one oscillator to the primary system as was previously suggested. Two numerical examples are analyzed by the original and the proposed techniques. The results are compared with the response values obtained using coupled dynamic analysis. The proposed technique proved to be more accurate in estimating the peak response of the secondary system, specially in cases of tuned, non-classically damped P-S systems. (orig.)

  3. Public support for social financing of health care in Switzerland.

    Science.gov (United States)

    Perneger, Thomas V; Hudelson, Patricia M

    2005-01-01

    The purpose of this study was to identify factors associated with the public's preference for financing health care according to people's ability to pay. The authors compared voters' support in 26 Swiss cantons for a legislative proposal to replace regionally rated health insurance premiums (current system) with premiums proportional to income and wealth, and co-financed through the value added tax. The vote took place in May 2003, and the initiative was rejected, with only 27 percent of support nationwide. However, support varied more than threefold, from 13 to 44 percent, among cantons. In multivariate analysis, support was most strongly correlated with the approval rate of the 1994 law on health insurance, which strengthened solidarity between the sick and the healthy. More modest associations were seen between support for the initiative and the health insurance premium of 2003, and proportions of elderly and urban residents in the population. Hence support for more social financing of health care was best explained by past preference for a social health insurance system in the local community.

  4. Thermal Hydraulic Analysis of RPV Support Cooling System for HTGR

    International Nuclear Information System (INIS)

    Min Qi; Wu Xinxin; Li Xiaowei; Zhang Li; He Shuyan

    2014-01-01

    Passive safety is now of great interest for future generation reactors because of its reduction of human interaction and avoidance of failures of active components. reactor pressure vessel (RPV) support cooling system (SCS) for high temperature gas-cooled reactor (HTGR) is a passive safety system and is used to cool the concrete seats for the four RPV supports at its bottom. The SCS should have enough cooling capacity to ensure the temperature of the concrete seats for the supports not exceeding the limit temperature. The SCS system is composed of a natural circulation water loop and an air cooling tower. In the water loop, there is a heat exchanger embedded in the concrete seat, heat is transferred by thermal conduction and convection to the cooling water. Then the water is cooled by the air cooler mounted in the air cooling tower. The driving forces for water and air are offered by the density differences caused by the temperature differences. In this paper, the thermal hydraulic analysis for this system was presented. Methods for decoupling the natural circulation and heat transfer between the water loop and air flow were introduced. The operating parameters for different working conditions and environment temperatures were calculated. (author)

  5. FEASIBILITY ANALYSIS OF NAVAL BASE RELOCATION USING SWOT AND AHP METHOD TO SUPPORT MAIN DUTIES OPERATION

    Directory of Open Access Journals (Sweden)

    Putu Yogi

    2017-11-01

    Full Text Available Naval Base as part of Integrated Fleet Weapon System has an important role in maintaining the strategic environment in the region of Indonesia. Naval Base with a strategic location will support Indonesian Navy’s main duty to carry out the administrative and logistical support. Due to the limitation of Naval Base’s condition, feasibility study will be required to relocate the Naval Base. In this feasibility study, a combination of methods between SWOT analysis and Analytical Hierarchy Process (AHP is used. The results of the Internal Factors Evaluation (IFE Matrix Analysis is 4.72 and External Factors Evaluation (EFE Matrix Analysis is 2.91. In general, the balance of power between the IFE Matrix and EFE Matrix is located in Quadrants I and thus, the Aggressive Strategy is supported. While the Matrix Analysis’ result of Internal - External (IE showed that the score of IFE and EFE located in Quadrant II and VII.

  6. An Intelligent Decision Support System for Leukaemia Diagnosis using Microscopic Blood Images

    Science.gov (United States)

    Chin Neoh, Siew; Srisukkham, Worawut; Zhang, Li; Todryk, Stephen; Greystoke, Brigit; Peng Lim, Chee; Alamgir Hossain, Mohammed; Aslam, Nauman

    2015-01-01

    This research proposes an intelligent decision support system for acute lymphoblastic leukaemia diagnosis from microscopic blood images. A novel clustering algorithm with stimulating discriminant measures (SDM) of both within- and between-cluster scatter variances is proposed to produce robust segmentation of nucleus and cytoplasm of lymphocytes/lymphoblasts. Specifically, the proposed between-cluster evaluation is formulated based on the trade-off of several between-cluster measures of well-known feature extraction methods. The SDM measures are used in conjuction with Genetic Algorithm for clustering nucleus, cytoplasm, and background regions. Subsequently, a total of eighty features consisting of shape, texture, and colour information of the nucleus and cytoplasm sub-images are extracted. A number of classifiers (multi-layer perceptron, Support Vector Machine (SVM) and Dempster-Shafer ensemble) are employed for lymphocyte/lymphoblast classification. Evaluated with the ALL-IDB2 database, the proposed SDM-based clustering overcomes the shortcomings of Fuzzy C-means which focuses purely on within-cluster scatter variance. It also outperforms Linear Discriminant Analysis and Fuzzy Compactness and Separation for nucleus-cytoplasm separation. The overall system achieves superior recognition rates of 96.72% and 96.67% accuracies using bootstrapping and 10-fold cross validation with Dempster-Shafer and SVM, respectively. The results also compare favourably with those reported in the literature, indicating the usefulness of the proposed SDM-based clustering method. PMID:26450665

  7. Value Systems Alignment Analysis in Collaborative Networked Organizations Management

    Directory of Open Access Journals (Sweden)

    Patricia Macedo

    2017-11-01

    Full Text Available The assessment of value systems alignment can play an important role in the formation and evolution of collaborative networks, contributing to reduce potential risks of collaboration. For this purpose, an assessment tool is proposed as part of a collaborative networks information system, supporting both the formation and evolution of long-term strategic alliances and goal-oriented networks. An implementation approach for value system alignment analysis is described, which is intended to assist managers in virtual and networked organizations management. The implementation of the assessment and analysis methods is supported by a set of software services integrated in the information system that supports the management of the networked organizations. A case study in the solar energy sector was conducted, and the data collected through this study allow us to confirm the practical applicability of the proposed methods and the software services.

  8. Engineering evaluation/cost analysis for the proposed management of 15 nonprocess buildings (15 series) at the Weldon Spring Site Chemical Plant, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    MacDonell, M.M.; Peterson, J.M.

    1991-11-01

    The US Department of Energy, under its Surplus Facilities Management Program (SFMP), is responsible for cleanup activities at the Weldon Spring site, located near Weldon Spring, Missouri. The site consists of two noncontiguous areas: (1) a raffinate pits and chemical plant area and (2) a quarry. This engineering evaluation/cost analysis (EE/CA) report has been prepared to support a proposed removal action to manage 15 nonprocess buildings, identified as the 15 Series buildings, at the chemical plant on the Weldon Spring site. These buildings have been nonoperational for more than 20 years, and the deterioration that has occurred during this time has resulted in a potential threat to site workers, the general public, and the environment. The EE/CA documentation of this proposed action is consistent with guidance from the US Environmental Protection Agency (EPA) that addresses removal actions at sites subject to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended by the Superfund Amendments and Reauthorization Act of 1986. Actions at the Weldon Spring site are subject to CERCLA requirements because the site is on the EPA's National Priorities List. The objectives of this report are to (1) identify alternatives for management of the nonprocess buildings; (2) document the selection of response activities that will mitigate the potential threat to workers, the public, and the environment associated with these buildings; and (3) address environmental impact associated with the proposed action

  9. Effects of Socioeconomic Status and Social Support on Violence against Pregnant Women: A Structural Equation Modeling Analysis.

    Science.gov (United States)

    Ribeiro, Marizélia Rodrigues Costa; Silva, Antônio Augusto Moura da; Alves, Maria Teresa Seabra Soares de Britto E; Batista, Rosângela Fernandes Lucena; Ribeiro, Cecília Cláudia Costa; Schraiber, Lilia Blima; Bettiol, Heloisa; Barbieri, Marco Antônio

    2017-01-01

    Few studies have used structural equation modeling to analyze the effects of variables on violence against women. The present study analyzed the effects of socioeconomic status and social support on violence against pregnant women who used prenatal services. This was a cross-sectional study based on data from the Brazilian Ribeirão Preto and São Luís birth cohort studies (BRISA). The sample of the municipality of São Luís (Maranhão/Brazil) consisted of 1,446 pregnant women interviewed in 2010 and 2011. In the proposed model, socioeconomic status was the most distal predictor, followed by social support that determined general violence, psychological violence or physical/sexual violence, which were analyzed as latent variables. Violence was measured by the World Health Organization Violence against Women (WHO VAW) instrument. The São Luis model was estimated using structural equation modeling and validated with 1,378 pregnant women from Ribeirão Preto (São Paulo/Brazil). The proposed model showed good fit for general, psychological and physical/sexual violence for the São Luís sample. Socioeconomic status had no effect on general or psychological violence (p>0.05), but pregnant women with lower socioeconomic status reported more episodes of physical/sexual violence (standardized coefficient, SC = -0.136; p = 0.021). This effect of socioeconomic status was indirect and mediated by low social support (SC = -0.075; psocioeconomic status. Physical/sexual violence was more common for pregnant women with lower socioeconomic status and lower social support. Better social support contributed to reduction of all types of violence. Results were nearly the same for the validation sample of Ribeirão Preto except that SES was not associated with physical/sexual violence.

  10. Evaluation of SOVAT: An OLAP-GIS decision support system for community health assessment data analysis

    Directory of Open Access Journals (Sweden)

    Parmanto Bambang

    2008-06-01

    Full Text Available Abstract Background Data analysis in community health assessment (CHA involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture. On-Line Analytical Processing (OLAP is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT currently used by many public health professionals. Methods SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS". Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Results Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (α = .01 from SPSS-GIS for satisfaction and time (p Conclusion Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the

  11. Regional Civil Support Forces for Homeland Defense and Civil Support Missions

    National Research Council Canada - National Science Library

    Nuismer, Barbara A

    2007-01-01

    To protect the homeland, a plan to form ten regional Civil Support Forces (CSF) made up of National Guard forces has been proposed by senior fellow Christine Wormuth of the Center for Strategic and International Studies (CSIS...

  12. Proposal of the School Children Support System Using ICF to Communicate with the Teachers, the Specialists and the Guardians, Requiring Special Support Education

    Science.gov (United States)

    Ogoshi, Yasuhiro; Nakai, Akio; Mitsuhashi, Yoshinori; Araki, Chikahiro

    At the present, educational support is required to the school children who confronts problems on study, life style, mental and health. For the school children who hold these problems, inference and understanding of those around adults are mandatory, for that intimate cooperation between the school, home and specialized agencies should be important. With above reason, the school children support system using ICF to communicate the school, the specialist and the guardian is developed in this works. Realization of this system, immediate support to the school children and their guardians will be possible. It is also considered to be a preventive support instead of an allopathic support.

  13. Writing a Research Proposal to The Research Council of Oman

    OpenAIRE

    Al-Shukaili, Ahmed; Al-Maniri, Abdullah

    2017-01-01

    Writing a research proposal can be a challenging task for young researchers. This article explains how to write a strong research proposal to apply for funding, specifically, a proposal for The Research Council (TRC) of Oman. Three different research proposal application forms are currently used in TRC, including Open Research Grant (ORG), Graduate Research Support Program (GRSP), and Faculty-mentored Undergraduate Research Award Program (FURAP). The application forms are filled and submitted...

  14. R&D Proposal RD51 Extension Beyond 2018

    CERN Document Server

    Dalla Torre, S; Ropelewski, L; Titov, M

    2018-01-01

    The RD51 Collaboration, in charge of the development and dissemination of MicroPattern Gaseous Detectors (MPGD) since 2008, proposes to extend its ac-tivity, after 2018, for a further five-year term. Since the RD51 initial years, the community of MPGD developers and users has grown considerably. It is reflected by the many MPGD-based applications in high energy and nuclear physics experi-ments as well as in other basic and applied-research fields. They rely on the parallel progress of detector concepts and associated technologies. The cultural, infrastruc-ture and networking support offered by RD51 has been essential in this process. The rich portfolio of MPGD projects, under constant expansion, is accompanied by novel ideas on further developments and applications. The proposed next term of RD51 activities aims at bringing a number of de-tector concepts to maturity, initiating new projects and continuing the support to the community. Among leading proposed projects are ultrafast, high-rate MPGDs; discharg...

  15. Cost Analysis of a High Support Housing Initiative for Persons with Severe Mental Illness and Long-Term Psychiatric Hospitalization.

    Science.gov (United States)

    Rudoler, David; de Oliveira, Claire; Jacob, Binu; Hopkins, Melonie; Kurdyak, Paul

    2018-01-01

    The objective of this article was to conduct a cost analysis comparing the costs of a supportive housing intervention to inpatient care for clients with severe mental illness who were designated alternative-level care while inpatient at the Centre for Addiction and Mental Health in Toronto. The intervention, called the High Support Housing Initiative, was implemented in 2013 through a collaboration between 15 agencies in the Toronto area. The perspective of this cost analysis was that of the Ontario Ministry of Health and Long-Term Care. We compared the cost of inpatient mental health care to high-support housing. Cost data were derived from a variety of sources, including health administrative data, expenditures reported by housing providers, and document analysis. The High Support Housing Initiative was cost saving relative to inpatient care. The average cost savings per diem were between $140 and $160. This amounts to an annual cost savings of approximately $51,000 to $58,000. When tested through sensitivity analysis, the intervention remained cost saving in most scenarios; however, the result was highly sensitive to health system costs for clients of the High Support Housing Initiative program. This study suggests the High Support Housing Initiative is potentially cost saving relative to inpatient hospitalization at the Centre for Addiction and Mental Health.

  16. Preparation and analysis of standardized waste samples for Controlled Ecological Life Support Systems (CELSS)

    Science.gov (United States)

    Carden, J. L.; Browner, R.

    1982-01-01

    The preparation and analysis of standardized waste samples for controlled ecological life support systems (CELSS) are considered. Analysis of samples from wet oxidation experiments, the development of ion chromatographic techniques utilizing conventional high pressure liquid chromatography (HPLC) equipment, and an investigation of techniques for interfacing an ion chromatograph (IC) with an inductively coupled plasma optical emission spectrometer (ICPOES) are discussed.

  17. Time Series Analysis and Forecasting for Wind Speeds Using Support Vector Regression Coupled with Artificial Intelligent Algorithms

    Directory of Open Access Journals (Sweden)

    Ping Jiang

    2015-01-01

    Full Text Available Wind speed/power has received increasing attention around the earth due to its renewable nature as well as environmental friendliness. With the global installed wind power capacity rapidly increasing, wind industry is growing into a large-scale business. Reliable short-term wind speed forecasts play a practical and crucial role in wind energy conversion systems, such as the dynamic control of wind turbines and power system scheduling. In this paper, an intelligent hybrid model for short-term wind speed prediction is examined; the model is based on cross correlation (CC analysis and a support vector regression (SVR model that is coupled with brainstorm optimization (BSO and cuckoo search (CS algorithms, which are successfully utilized for parameter determination. The proposed hybrid models were used to forecast short-term wind speeds collected from four wind turbines located on a wind farm in China. The forecasting results demonstrate that the intelligent hybrid models outperform single models for short-term wind speed forecasting, which mainly results from the superiority of BSO and CS for parameter optimization.

  18. AVGVSTINVS HIPONENSIS, VIR CHRISTIANUS, DICENDI PERITUS: Analysis of classical influences in the proposal of Augustinian oratorical training

    Directory of Open Access Journals (Sweden)

    Ivan Baycer Junior

    2010-12-01

    Full Text Available This work will expose an analysis of classical influences present in the proposal of Augustinian oratorical training, being developed in parallel with the study of concepts of rhetoric within Christianity. Aiming to note that the presentation prepared by Augustine of Hippo to the classical eloquence simultaneously reflects the rejection to his past and the ideas inherited by the Christian formation. Thus, it will realize that the old rhetorician proposes bases for a non artificial eloquence, whose bases reflect the Pauline conceptions – strongly influenced by Platonism – and the Latin rhetorical heritage, represented mainly by Cicero. Proposal developed during the fourth book of the treatise De doctrina Christiana, the focus of this study, where we see Augustine to reflect and to base the ideal of simple orator, with wise speech and non artificial. 

  19. An Analysis of the International Proposals for Harmonization Accounts Statement and Government Finance Statistics

    OpenAIRE

    Andrei Razvan Crisan; Melinda Timea Fulop

    2014-01-01

    Considering the modern market requirements and the government in the last decade that require two information systems: accounting and statistic. In accordance with these requirements, we believe it is very important to analyze the harmonizing of the two systems between Government Finance Statistics (GFS), used in support of macroeconomic analysis and General Purpose Financial Reports (GPFR) according with International Public Sector Accounting Standards, used for making decisions and accounta...

  20. Technical Support to an Operating PWR vis-a-vis Safety Analysis

    International Nuclear Information System (INIS)

    Gul, Subhan; Khan, M.; Chughtai, M. Kamran

    2011-01-01

    Currently a PWR of 300 MWe capacity CHASNUPP-I is in operation since the year 2000. Technical support being provided includes in-core fuel management and corresponding safety analysis for the reshuffled core for the next cycle. Currently calculation and analysis were performed for Cycle 6 to achieve the safe and economical loading pattern. The technique used is designated as out in mode (modified). In this technique, most of the fresh fuel assemblies are not directly located at the periphery of the core, but near the boundary. This technique has the advantage that without using burnable absorber we can design a low leakage core with extended cycle and maximum batch averaged burnup. (author)

  1. Tuning metal support interactions enhances the activity and durability of TiO2-supported Pt nanocatalysts

    International Nuclear Information System (INIS)

    Hsieh, Bing-Jen; Tsai, Meng-Che; Pan, Chun-Jern; Su, Wei-Nien; Rick, John; Chou, Hung-Lung; Lee, Jyh-Fu; Hwang, Bing-Joe

    2017-01-01

    Highlights: • The coverage of TiO x on Pt can be modified by thermal and fluoric acid treatments. • Strong metal support interaction (SMSI) can be testified by electrochemical method. • For the first time, the SMSI effect is observed at 200 °C with supporting TEM images. • Increased activity and stability are attributed to stronger SMSI. • This tunable approach is valid for other oxide supported catalysts, e.g. Pt/Nb-TiO 2 . - Abstract: A facile approach to enhance catalytic activity and durability of TiO 2 -supported Pt nanocatalysts by tuning strong metal support interaction (SMSI) is investigated in this work. No need for a high temperature treatment, the strong metal-support interaction (SMSI) in TiO 2 -supported Pt can be induced at 200° C by H 2 reduction. Moreover, electrochemical methods (methanol oxidation reaction and cyclic voltammetry) are first reported ever to be effective characterization tools for the coverage state caused by SMSI. In addition, the SMSI has also been confirmed by X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and Transmission Electron Microscopy. It is found that the encapsulation of TiO 2-x species on the surface Pt clusters was induced and modified by thermal reduction and fluoric acid treatment. The catalytic activity and durability of the TiO 2 -supported Pt nanocatalysts are strongly dependent of the state of SMSI. The proposed SMSI-tunable approach to enhance the ORR activity and stability is also proved applicable to Pt/Ti 0.9 Nb 0.1 O 2 nanocatalysts. We believe that the reported approach paves the way for manipulating the activity and stability of other TiO 2 -supported metal nanocatalysts. Furthermore, the suggested electrochemical methods offer facile and effective ways to verify the presence of coverage state before combining with other physical analysis.

  2. Sick of inequality: gender and support for paid sick days.

    Science.gov (United States)

    Lindemann, Danielle J; Houser, Linda; White, Karen

    2015-01-01

    The availability of paid sick days (PSD) is on the forefront of policy issues relating to women's health and well-being. Previous research regarding PSD and other forms of family-work balance legislation has linked access to paid time off from work for addressing one's own or another's health concerns to a range of health benefits for working women and their families. In general, public support for such policies is high, but little work has tested the extent to which support extends to PSD. Researchers have yet to engage in a rigorous statistical analysis of public opinion on PSD, including whether opinion varies by gender. Using data from a 2013 poll of adults in New Jersey (n = 925), we bridged this research gap by conducting the first multivariate analysis of public attitudes toward PSD. As expected, we found markedly high levels of support for PSD across all respondents, with a preponderance of most sociodemographic categories supporting proposed PSD legislation in New Jersey. We also found that gender was a strong predictor of support for PSD, with women significantly (odds ratio, 1.916; p ≤ .01) more likely than men to be in favor of such legislation. We discuss the implications of our findings for future work on PSD as well as for research concerning women, wellness, and work-life legislation more broadly. Published by Elsevier Inc.

  3. Guidebook for territories' support in the analysis of their socio-economical vulnerability to climate change

    International Nuclear Information System (INIS)

    2011-01-01

    ; GPD cites maritimes in the Languedoc-Roussillon region; and Scot ouest in the Alpes-Maritimes region. The purpose of this test phase was to provide a real-world example of implementation of an analysis and mobilization process. It provided a practical illustration of an approach to using the guide as a support for vulnerability analysis as well as allowing identification of users' questions about application of the guidelines. Throughout implementation of the approach proposed by the guidelines, attention must be paid to several methodological points, especially the following: - as for all of the inter-ministerial group's work, scenario known as 'constant economy' is assumed; - the socio-economic importance given to activities in a given territory does not necessarily reflect the ranking that local players would give; - the vulnerability considered here does not include environmental issues such as biodiversity; - the vulnerability indices proposed are general in nature: demographics, sectoral interactions, etc.; numerous factors can alter the matrix locally and collection of local data should, therefore, help to construct a 'territorialised' matrix for potential impacts and corresponding vulnerability

  4. Proposed minimum requirements for the operational characteristics and testing of closed circuit life support system control electronics.

    Science.gov (United States)

    Kirk, J C

    1998-01-01

    The popularization and transformation of scuba diving into a broadly practiced sport has served to ignite the interest of technically oriented divers into ever more demanding areas. This, along with the gradual release of military data, equipment, and techniques of closed circuit underwater breathing apparatus, has resulted in a virtual explosion of semiclosed and closed circuit systems for divers. Although many of these systems have been carefully thought out by capable designers, the impulse to rush to market with equipment that has not been fully developed and carefully tested is irresistible to marketers. In addition, the presence of systems developed by well-intentioned and otherwise competent designers who are, nonetheless, inexperienced in the field of life support can result in the sale of failure-prone equipment to divers who lack the knowledge and skills to identify deficiencies before disaster occurs. For this reason, a set of industry standards establishing minimum requirements and testing is needed to guide the designers of this equipment, and to protect the user community from incomplete or inadequate design. Many different technologies go into the development of closed circuit scuba. One key area is the design of electronics to monitor and maintain the critical gas mixtures of the closed circuit loop. Much of the system reliability and inherent danger is resident in the design of the circuitry and the software (if any) that runs it. This article will present a set of proposed minimum requirements, with the goal of establishing a dialog for the creation of guidelines for the classification, rating, design, and testing of embedded electronics for life support systems used in closed circuit applications. These guidelines will serve as the foundation for the later creation of a set of industry specifications.

  5. DSM-5: proposed changes to depressive disorders.

    Science.gov (United States)

    Wakefield, Jerome C

    2012-03-01

    The Diagnostic and Statistical Manual of Mental Disorders (DSM) is currently undergoing a revision that will lead to a fifth edition in 2013. Proposed changes for DSM-5 include the creation of several new categories of depressive disorder. Some nosologists have expressed concern that the proposed changes could yield many 'false-positive diagnoses' in which normal distress is mislabeled as a mental disorder. Such confusion of normal distress and mental disorder undermines the interpretability of clinical trials and etiological research, causes inefficient allocation of resources, and incurs risks of unnecessary treatment. To evaluate these concerns, I critically examine five proposed DSM-5 expansions in the scope of depressive and grief disorders: (1) a new mixed anxiety/depression category; (2) a new premenstrual dysphoric disorder category; (3) elimination of the major depression bereavement exclusion; (4) elimination of the adjustment disorder bereavement exclusion, thus allowing the diagnosis of subsyndromal depressive symptoms during bereavement as adjustment disorders; and (5) a new category of adjustment disorder related to bereavement for diagnosing pathological non-depressive grief. I examine each proposal's face validity and conceptual coherence as well as empirical support where relevant, with special attention to potential implications for false-positive diagnoses. I conclude that mixed anxiety/depression and premenstrual dysphoric disorder are needed categories, but are too broadly drawn and will yield substantial false positives; that the elimination of the bereavement exclusion is not supported by the evidence; and that the proposed elimination of the adjustment-disorder bereavement exclusion, as well as the new category of grief-related adjustment disorder, are inconsistent with recent grief research, which suggests that these proposals would massively pathologize normal grief responses.

  6. Popular support for progressive taxation

    OpenAIRE

    Marhuenda Hurtado, Francisco; Ortuño Ortín, Ignacio Isidro

    1995-01-01

    The popular support obtained by two parties who propose two qualitatively different tax schernes is analyzed. We show that if the median voter is below the mean, then any progressive proposal always wins over a regressive one, provided it leaves the poorest agent at least as well off as the latter does.

  7. Near-Infrared Spectroscopy Analysis of Heavy Fuel Oils Using a New Diffusing Support.

    Science.gov (United States)

    Dupuy, Nathalie; Brahem, Zeineb; Amat, Sandrine; Kister, Jacky

    2015-10-01

    The characterization of heavy fuel oils (HFOs), used as fuel for boats, requires the analysis of various properties that are essential for engine optimization and pollution control. For some time, near-infrared (NIR) spectroscopy combined with chemometric treatment of the spectra was used for on-line analysis. This preliminary study included 61 heavy fuels from Europe, America, and Asia with different specifications according to their geographical origin; their refining process; and their physicochemical properties, including density, flash point, viscosity, and sulfur content. We have developed a new method for sampling heavy fuels on a fiberglass cell support. This support offers the advantages of speed, easy implementation, repeatable results, and freedom from problems associated with tank cleaning. Two sample presentations, an integrating sphere and an optical fiber, were used to collect the NIR spectra. A theoretical study of the choice of the value of resolution, scan number, and spectral region was conducted. The best conditions were chosen as a function of the quality of quantitative analysis results on viscosity, sulfur content, flash point, and density. The two collecting methods were compared on the same criteria.

  8. Construction of an integrated database to support genomic sequence analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, W.; Overbeek, R.

    1994-11-01

    The central goal of this project is to develop an integrated database to support comparative analysis of genomes including DNA sequence data, protein sequence data, gene expression data and metabolism data. In developing the logic-based system GenoBase, a broader integration of available data was achieved due to assistance from collaborators. Current goals are to easily include new forms of data as they become available and to easily navigate through the ensemble of objects described within the database. This report comments on progress made in these areas.

  9. A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

    Science.gov (United States)

    Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

    2007-06-01

    Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

  10. On the proposal of an intelligent support system with a cognitive architecture based on contextual modules for the operators of nuclear power plants

    International Nuclear Information System (INIS)

    Soares, Herculano Vieira; Alvarenga, Marco Antonio Bayout; Schirru, Roberto

    2007-01-01

    The operators' actions in a control room of a nuclear power plant are controlled by production rules in the emergency procedures of the operation manual. For each accident, there is a specific group of safety tasks composed of a set of specified actions. In this work we propose an intelligent support system based on a cognitive architecture composed of contextual modules, instead of functional modules. This approach consists on the determination of a task space, where we can define subspaces. In the subspaces where the set of values of the parameters is familiar, at least one of the rules in the procedural memory has its conditions completely satisfied. In this context, the proposed support system will be guided by an expert system, with a procedural memory composed of IF - THEN rules, that contains the input conditions with strict values of the parameters in the IF part, and a corresponding safety task in the THEN part. When the operator is in a situation in which the set of values of those variables falls in a non-familiar context, none of the rules in the procedural memory will have its conditions completely satisfied. In this context, it will be, then, utilized the connectionist part of the architecture, a fuzzy neural network (with radial activation functions), to classify the set of parameters and to choose a set of safety tasks applicable to the situation. The fuzzy logic provides an inference mechanism under uncertainty, while the neural network offers advantages of learning, adaptation, failure tolerance, parallelism and generalization. (author)

  11. 75 FR 12241 - Agency Information Collection Activities; Proposed Collection; Comment Request; Alzheimer's...

    Science.gov (United States)

    2010-03-15

    ... Activities; Proposed Collection; Comment Request; Alzheimer's Disease Supportive Services Program... requirements relating to the Alzheimer's Disease Supportive Services Program. DATES: Submit written or... other forms of information technology. The Alzheimer's Disease Supportive Services Program (ADSSP) is...

  12. Analysis of stresses on the 1st phase support of the monitoring drifts of the radioactive waste repository

    Directory of Open Access Journals (Sweden)

    Hatala Jozef

    1999-09-01

    Full Text Available In the paper, the stability analysis of the radioactive waste repository monitoring drifts’ support by means of the numerical modelling - finite element method is described. The aim of this analysis was to judge to what extent the designed 1st phase support’s parameters correspond with the geomechanical conditions determined by the engineering-geological survey.

  13. The effectiveness of self-management support interventions for men with long-term conditions: a systematic review and meta-analysis.

    Science.gov (United States)

    Galdas, Paul; Fell, Jennifer; Bower, Peter; Kidd, Lisa; Blickem, Christian; McPherson, Kerri; Hunt, Kate; Gilbody, Simon; Richardson, Gerry

    2015-03-20

    To assess the effectiveness of self-management support interventions in men with long-term conditions. A quantitative systematic review with meta-analysis. The Cochrane Database of Systematic Reviews was searched to identify published reviews of self-management support interventions. Relevant reviews were screened to identify randomised controlled trials (RCTs) of self-management support interventions conducted in men alone, or which analysed the effects of interventions by sex. Data on relevant outcomes, patient populations, intervention type and study quality were extracted. Quality appraisal was conducted using the Cochrane Risk of Bias Tool. Meta-analysis was conducted to compare the effects of interventions in men, women, and mixed-sex sub-groups. 40 RCTs of self-management support interventions in men, and 20 eligible RCTs where an analysis by sex was reported, were included in the review. Meta-analysis suggested that physical activity, education, and peer support-based interventions have a positive impact on quality of life in men. However, there is currently insufficient evidence to make strong statements about whether self-management support interventions show larger, similar or smaller effects in men compared with women and mixed-sex groups. Clinicians may wish to consider whether certain types of self-management support (eg, physical activity, education, peer support) are particularly effective in men, although more research is needed to fully determine and explore this. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. Softwareland Chronicles: A Software Development Meta-Process Proposal

    Directory of Open Access Journals (Sweden)

    Bolanos Sandro

    2016-05-01

    Full Text Available This paper presents the software development meta-process (SD-MP as a proposal to set up software projects. Within this proposal we offer conceptual elements that help solve the war of methodologies and processes in favor of an integrating viewpoint, where the main flaws associated with conventional and agile approaches are removed. Our newly developed software platform to support the meta-process is also presented together with three case studies involving projects currently in progress, where the framework proposed in SD-MP has been applied.

  15. 77 FR 40051 - Proposed Agency Information Collection Activities; Comment Request

    Science.gov (United States)

    2012-07-06

    ... quarterly on the bank holding company's Consolidated Financial Statements for Bank Holding Companies (FR Y.... Copies of the Paperwork Reduction Act Submission, supporting statements and approved collection of..., including the proposed reporting form and instructions, supporting statement, and other documentation will...

  16. A suite of models to support the quantitative assessment of spread in pest risk analysis

    NARCIS (Netherlands)

    Robinet, C.; Kehlenbeck, H.; Werf, van der W.

    2012-01-01

    In the frame of the EU project PRATIQUE (KBBE-2007-212459 Enhancements of pest risk analysis techniques) a suite of models was developed to support the quantitative assessment of spread in pest risk analysis. This dataset contains the model codes (R language) for the four models in the suite. Three

  17. Radioactive waste vitrification offgas analysis proposal

    International Nuclear Information System (INIS)

    Nelson, C.W.; Morrey, E.V.

    1993-11-01

    Further validation of the Hanford Waste Vitrification Plant (HWVP) feed simulants will be performed by analyzing offgases during crucible melting of actual waste glasses and simulants. The existing method of vitrifying radioactive laboratory-scale samples will be modified to allow offgas analysis during preparation of glass for product testing. The analysis equipment will include two gas chromatographs (GC) with thermal conductivity detectors (TCD) and one NO/NO x analyzer. This equipment is part of the radioactive formating offgas system. The system will provide real-time analysis of H 2 , O 2 , N 2 , NO, N 2 O, NO 2 , CO, CO 2 , H 2 O, and SO 2 . As with the prior melting method, the product glass will be compatible with durability testing, i.e., Product Consistency Test (PCT) and Material Characterization Center (MCC-1), and crystallinity analysis. Procedures have been included to ensure glass homogeneity and quenching. The radioactive glass will be adaptable to Fe +2 /ΣFe measurement procedures because the atmosphere above the melt can be controlled. The 325 A-hot cell facility is being established as the permanent location for radioactive offgas analysis during formating, and can be easily adapted to crucible melt tests. The total costs necessary to set up and perform offgas measurements on the first radioactive core sample is estimated at $115K. Costs for repeating the test on each additional core sample are estimated to be $60K. The schedule allows for performing the test on the next available core sample

  18. Neutron–gamma discrimination based on the support vector machine method

    International Nuclear Information System (INIS)

    Yu, Xunzhen; Zhu, Jingjun; Lin, ShinTed; Wang, Li; Xing, Haoyang; Zhang, Caixun; Xia, Yuxi; Liu, Shukui; Yue, Qian; Wei, Weiwei; Du, Qiang; Tang, Changjian

    2015-01-01

    In this study, the combination of the support vector machine (SVM) method with the moment analysis method (MAM) is proposed and utilized to perform neutron/gamma (n/γ) discrimination of the pulses from an organic liquid scintillator (OLS). Neutron and gamma events, which can be firmly separated on the scatter plot drawn by the charge comparison method (CCM), are detected to form the training data set and the test data set for the SVM, and the MAM is used to create the feature vectors for individual events in the data sets. Compared to the traditional methods, such as CCM, the proposed method can not only discriminate the neutron and gamma signals, even at lower energy levels, but also provide the corresponding classification accuracy for each event, which is useful in validating the discrimination. Meanwhile, the proposed method can also offer a predication of the classification for the under-energy-limit events

  19. An Autonomous Mobile Agent-Based Distributed Learning Architecture-A Proposal and Analytical Analysis

    Directory of Open Access Journals (Sweden)

    I. Ahmed M. J. SADIIG

    2005-10-01

    Full Text Available An Autonomous Mobile Agent-Based Distributed Learning Architecture-A Proposal and Analytical Analysis Dr. I. Ahmed M. J. SADIIG Department of Electrical & Computer EngineeringInternational Islamic University GombakKuala Lumpur-MALAYSIA ABSTRACT The traditional learning paradigm invoving face-to-face interaction with students is shifting to highly data-intensive electronic learning with the advances in Information and Communication Technology. An important component of the e-learning process is the delivery of the learning contents to their intended audience over a network. A distributed learning system is dependent on the network for the efficient delivery of its contents to the user. However, as the demand of information provision and utilization increases on the Internet, the current information service provision and utilization methods are becoming increasingly inefficient. Although new technologies have been employed for efficient learning methodologies within the context of an e-learning environment, the overall efficiency of the learning system is dependent on the mode of distribution and utilization of its learning contents. It is therefore imperative to employ new techniques to meet the service demands of current and future e-learning systems. In this paper, an architecture based on autonomous mobile agents creating a Faded Information Field is proposed. Unlike the centralized information distribution in a conventional e-learning system, the information is decentralized in the proposed architecture resulting in increased efficiency of the overall system for distribution and utilization of system learning contents efficiently and fairly. This architecture holds the potential to address the heterogeneous user requirements as well as the changing conditions of the underlying network.

  20. Regression analysis of pulsed eddy current signals for inspection of steam generator tube support structures

    International Nuclear Information System (INIS)

    Buck, J.; Underhill, P.R.; Mokros, S.G.; Morelli, J.; Krause, T.W.; Babbar, V.K.; Lepine, B.

    2015-01-01

    Nuclear steam generator (SG) support structure degradation and fouling can result in damage to SG tubes and loss of SG efficiency. Conventional eddy current technology is extensively used to detect cracks, frets at supports and other flaws, but has limited capabilities in the presence of multiple degradation modes or fouling. Pulsed eddy current (PEC) combined with principal components analysis (PCA) and multiple linear regression models was examined for the inspection of support structure degradation and SG tube off-centering with the goal of extending results to include additional degradation modes. (author)

  1. Streaming support for data intensive cloud-based sequence analysis.

    Science.gov (United States)

    Issa, Shadi A; Kienzler, Romeo; El-Kalioby, Mohamed; Tonellato, Peter J; Wall, Dennis; Bruggmann, Rémy; Abouelhoda, Mohamed

    2013-01-01

    Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS) technology. Based on the concepts of "resources-on-demand" and "pay-as-you-go", scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client's site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation.

  2. Streaming Support for Data Intensive Cloud-Based Sequence Analysis

    Directory of Open Access Journals (Sweden)

    Shadi A. Issa

    2013-01-01

    Full Text Available Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS technology. Based on the concepts of “resources-on-demand” and “pay-as-you-go”, scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client’s site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation.

  3. Streaming Support for Data Intensive Cloud-Based Sequence Analysis

    Science.gov (United States)

    Issa, Shadi A.; Kienzler, Romeo; El-Kalioby, Mohamed; Tonellato, Peter J.; Wall, Dennis; Bruggmann, Rémy; Abouelhoda, Mohamed

    2013-01-01

    Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS) technology. Based on the concepts of “resources-on-demand” and “pay-as-you-go”, scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client's site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation. PMID:23710461

  4. 76 FR 62066 - Phusion Projects, LLC, et al.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2011-10-06

    ..., including routine uses permitted by the Privacy Act, in the Commission's privacy policy, at http://www.ftc.gov/ftc/privacy.htm . Analysis of Agreement Containing Consent Order To Aid Public Comment The Federal... servings of alcohol in the container. Part II of the proposed order further prohibits, commencing six (6...

  5. Procedural-support music therapy in the healthcare setting: a cost-effectiveness analysis.

    Science.gov (United States)

    DeLoach Walworth, Darcy

    2005-08-01

    This comparative analysis examined the cost-effectiveness of music therapy as a procedural support in the pediatric healthcare setting. Many healthcare organizations are actively attempting to reduce the amount of sedation for pediatric patients undergoing various procedures. Patients receiving music therapy-assisted computerized tomography scans ( n = 57), echocardiograms ( n = 92), and other procedures ( n = 17) were included in the analysis. Results of music therapy-assisted procedures indicate successful elimination of patient sedation, reduction in procedural times, and decrease in the number of staff members present for procedures. Implications for nurses and music therapists in the healthcare setting are discussed.

  6. Agent Supported Serious Game Environment

    Science.gov (United States)

    Terzidou, Theodouli; Tsiatsos, Thrasyvoulos; Miliou, Christina; Sourvinou, Athanasia

    2016-01-01

    This study proposes and applies a novel concept for an AI enhanced serious game collaborative environment as a supplementary learning tool in tertiary education. It is based on previous research that investigated pedagogical agents for a serious game in the OpenSim environment. The proposed AI features to support the serious game are the…

  7. On new proposal for holographic BCFT

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chong-Sun; Miao, Rong-Xin [Department of Physics, National Tsing-Hua University,Hsinchu 30013, Taiwan (China); Physics Division, National Center for Theoretical Sciences,National Tsing-Hua University, Hsinchu 30013, Taiwan (China); Guo, Wu-Zhong [Physics Division, National Center for Theoretical Sciences,National Tsing-Hua University, Hsinchu 30013, Taiwan (China)

    2017-04-14

    This paper is an extended version of our short letter on a new proposal for holographic boundary conformal field, i.e., BCFT. By using the Penrose-Brown-Henneaux (PBH) transformation, we successfully obtain the expected boundary Weyl anomaly. The obtained boundary central charges satisfy naturally a c-like theorem holographically. We then develop an approach of holographic renormalization for BCFT, and reproduce the correct boundary Weyl anomaly. This provides a non-trivial check of our proposal. We also investigate the holographic entanglement entropy of BCFT and find that our proposal gives the expected orthogonal condition that the minimal surface must be normal to the spacetime boundaries if they intersect. This is another support for our proposal. We also find that the entanglement entropy depends on the boundary conditions of BCFT and the distance to the boundary; and that the entanglement wedge behaves a phase transition, which is important for the self-consistency of AdS/BCFT. Finally, we show that the proposal of https://arxiv.org/abs/1105.5165 is too restrictive that it always make vanishing some of the boundary central charges.

  8. Wind Turbines Support Techniques during Frequency Drops — Energy Utilization Comparison

    Directory of Open Access Journals (Sweden)

    Ayman B. Attya

    2014-08-01

    Full Text Available The supportive role of wind turbines during frequency drops is still not clear enough, although there are many proposed algorithms. Most of the offered techniques make the wind turbine deviates from optimum power generation operation to special operation modes, to guarantee the availability of reasonable power support, when the system suffers frequency deviations. This paper summarizes the most dominant support algorithms and derives wind turbine power curves for each one. It also conducts a comparison from the point of view of wasted energy, with respect to optimum power generation. The authors insure the advantage of a frequency support algorithm, they previously presented, as it achieved lower amounts of wasted energy. This analysis is performed in two locations that are promising candidates for hosting wind farms in Egypt. Additionally, two different types of wind turbines from two different manufacturers are integrated. Matlab and Simulink are the implemented simulation environments.

  9. Alternate design concept for the SSC dipole magnet cryogenic support post

    International Nuclear Information System (INIS)

    Lipski, A.; Nicol, T.H.; Richardson, R.

    1991-03-01

    New materials and developments in the field of advanced composites have created the opportunity to take a fresh look into the design of the cryogenic supports for SSC collider dipole cryostats. Although the present reentrant post design meets the structural and thermal requirements, its assembly requires precision and proficiency. The objective of the proposed alternate concept is to reduce the overall cost of the support post by means of simplifying and optimizing its component design and assembly process. The present shrink fitted tube assembly may potentially be replaced by injection molded parts. New resin systems with lower thermal conductivity and high strength properties enable the utilization of automated production techniques such as injection molding and filament winding. This paper will provide analysis and design information for the alternate support post concept and compare its test performance and cost to the present support post. 3 refs., 12 figs., 4 tabs

  10. Deployment-related mental health support: comparative analysis of NATO and allied ISAF partners

    Directory of Open Access Journals (Sweden)

    Eric Vermetten

    2014-08-01

    members. Conclusion: This analysis demonstrated that in all five partners state-of-the-art preventative mental healthcare was included in the last deployment in Afghanistan, including a positive approach towards strengthening the mental resilience, a focus on self-regulatory skills and self-empowerment, and several initiatives that were well-integrated in a military context. These initiatives were partly/completely implemented by the military/colleagues/supervisors and applicable during several phases of the deployment cycle. Important new developments in operational mental health support are recognition of the role of social leadership and enhancement of operational peer support. This requires awareness of mental problems that will contribute to reduction of the barriers to care in case of problems. Finally, comparing mental health support services across countries can contribute to optimal preparation for the challenges of military deployment.

  11. Spool assembly support analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the pump pit spool assemblies. Hand calculations were used for the analysis. UBC, AISC, and load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  12. Nurses'experiences of perceived support and their contributing factors: A qualitative content analysis.

    Science.gov (United States)

    Sodeify, Roghieh; Vanaki, Zohreh; Mohammadi, Eesa

    2013-05-01

    Following professional standards is the main concern of all managers in organizations. The functions of nurses are essential for both productivity and improving health organizations. In human resources management, supporting nursing profession is of ultimate importance. However, nurses' experiences of perceived support, which are affected by various factors in workplace, have not been clearly explained yet. Thus, this study aimed to explain nurses' experiences of perceived support and their contributing factors. This study is a qualitative research in which 12 nurses were selected through purposive sampling among nurses in university hospitals affiliated to University of Medical Sciences, Urmia, Iran, during 2011-2012. Data collection was conducted through deep interviews with semi-structural questions. All interviews were first recorded and then transcribed. Finally, data were analyzed through conventional content analysis. The four main themes indicated that nurses experienced their workplace as non-supportive. Themes such as poor organizational climate, low social dignity, poor work conditions, and managers' ignorance to individual and professional values were considered as inhibitory factors to support. Nursing managers can promote nurses' positive support perceptions through recognizing inhibitory factors and applying fair solutions and take benefits of their positive consequences including high efficacy, self-esteem, and organizational commitment to promote the quality of care.

  13. The role of supervisor emotional support on individual job satisfaction: A multilevel analysis.

    Science.gov (United States)

    Pohl, Sabine; Galletta, Maura

    2017-02-01

    Supervisor emotional support is a strong determinant of job satisfaction. There is no study examining the effect of supervisor emotional support at the group level on job satisfaction. Multilevel statistical techniques can help disentangle the effects of subjective assessments from those of group factors. The study's aim was to examine the moderating role of supervisor emotional support (group-level variable) on the relationship between work engagement and job satisfaction (individual-level variables). A cross-sectional study was performed in 39units from three Belgian hospitals. A total of 323 nurses completed a self-reported questionnaire. We carried out a multilevel analysis by using Hierarchical Linear Modeling. The results showed that the cross-level interaction was significant. Hence, at individual-level, the nurses with high levels of work engagement showed high levels of job satisfaction and this relationship was stronger when supervisor emotional support at group-level was high. Contextual differences among groups had an impact on the form of the work engagement-job satisfaction relationship. This relationship between work engagement and job satisfaction is an individual and group level phenomenon. Ways to enhance emotional supervisor support include training supervisors in providing support and enhancing communication between nurses and supervisors. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Tool-supported Refactoring for JavaScript

    DEFF Research Database (Denmark)

    Feldthaus, Asger; Millstein, Todd; Møller, Anders

    2011-01-01

    Script because of its dynamic nature. We propose a framework for specifying and implementing JavaScript refactorings based on pointer analysis. We describe novel refactorings motivated by best practice recommendations for JavaScript programming, and demonstrate how they can be described concisely in terms...... of queries provided by our framework. Experiments performed with a prototype implementation on a suite of existing applications show that our approach is well-suited for developing practical refactoring tools for JavaScript.......Refactoring is a popular technique for improving the structure of existing programs while maintaining their behavior. For statically typed programming languages such as Java, a wide variety of refactorings have been described, and tool support for performing refactorings and ensuring...

  15. ALOHA—Astronomical Light Optical Hybrid Analysis - From experimental demonstrations to a MIR instrument proposal

    Science.gov (United States)

    Lehmann, L.; Darré, P.; Szemendera, L.; Gomes, J. T.; Baudoin, R.; Ceus, D.; Brustlein, S.; Delage, L.; Grossard, L.; Reynaud, F.

    2018-04-01

    This paper gives an overview of the Astronomical Light Optical Hybrid Analysis (ALOHA) project dedicated to investigate a new method for high resolution imaging in mid infrared astronomy. This proposal aims to use a non-linear frequency conversion process to shift the thermal infrared radiation to a shorter wavelength domain compatible with proven technology such as guided optics and detectors. After a description of the principle, we summarise the evolution of our study from the high flux seminal experiments to the latest results in the photon counting regime.

  16. Multilingual Analysis of Twitter News in Support of Mass Emergency Events

    Science.gov (United States)

    Zielinski, A.; Bügel, U.; Middleton, L.; Middleton, S. E.; Tokarchuk, L.; Watson, K.; Chaves, F.

    2012-04-01

    Social media are increasingly becoming an additional source of information for event-based early warning systems in the sense that they can help to detect natural crises and support crisis management during or after disasters. Within the European FP7 TRIDEC project we study the problem of analyzing multilingual twitter feeds for emergency events. Specifically, we consider tsunami and earthquakes, as one possible originating cause of tsunami, and propose to analyze twitter messages for capturing testified information at affected points of interest in order to obtain a better picture of the actual situation. For tsunami, these could be the so called Forecast Points, i.e. agreed-upon points chosen by the Regional Tsunami Warning Centers (RTWC) and the potentially affected countries, which must be considered when calculating expected tsunami arrival times. Generally, local civil protection authorities and the population are likely to respond in their native languages. Therefore, the present work focuses on English as "lingua franca" and on under-resourced Mediterranean languages in endangered zones, particularly in Turkey, Greece, and Romania. We investigated ten earthquake events and defined four language-specific classifiers that can be used to detect natural crisis events by filtering out irrelevant messages that do not relate to the event. Preliminary results indicate that such a filter has the potential to support earthquake detection and could be integrated into seismographic sensor networks. One hindrance in our study is the lack of geo-located data for asserting the geographical origin of the tweets and thus to be able to observe correlations of events across languages. One way to overcome this deficit consists in identifying geographic names contained in tweets that correspond to or which are located in the vicinity of specific points-of-interest such as the forecast points of the tsunami scenario. We also intend to use twitter analysis for situation picture

  17. Enhanced Situational Awareness and Decision Support for Operators of Future Distributed Power Network Architectures

    DEFF Research Database (Denmark)

    Zaher, Ammar S. A. E.; Catterson, V. M.; Syed, M. H.

    2016-01-01

    This paper describes scenarios proposed for a control room decision support system aimed at future power network operators. The purpose is to consider the requirements of the future control room from the perspective of the operator under the conditions of a significant frequency excursion incident....... The control room visualisation and decision support functionality for aiding the operator in restoring the frequency to its target value will be considered. The analysis takes place within the Web-ofCells framework, adopted to deal with power system control through a web of subsystems, called cells, which...

  18. Contact-Free Support Structures for Part Overhangs in Powder-Bed Metal Additive Manufacturing

    Directory of Open Access Journals (Sweden)

    Kenneth Cooper

    2017-12-01

    Full Text Available This study investigates the feasibility of a novel concept, contact-free support structures, for part overhangs in powder-bed metal additive manufacturing. The intent is to develop alternative support designs that require no or little post-processing, and yet, maintain effectiveness in minimizing overhang distortions. The idea is to build, simultaneously during part fabrications, a heat sink (called “heat support”, underneath an overhang to alter adverse thermal behaviors. Thermomechanical modeling and simulations using finite element analysis were applied to numerically research the heat support effect on overhang distortions. Experimentally, a powder-bed electron beam additive manufacturing system was utilized to fabricate heat support designs and examine their functions. The results prove the concept and demonstrate the effectiveness of contact-free heat supports. Moreover, the method was tested with different heat support parameters and applied to various overhang geometries. It is concluded that the heat support proposed has the potential to be implemented in industrial applications.

  19. A Methodology for Decision Support for Implementation of Cloud Computing IT Services

    Directory of Open Access Journals (Sweden)

    Adela Tušanová

    2014-07-01

    Full Text Available The paper deals with the decision of small and medium-sized software companies in transition to SaaS model. The goal of the research is to design a comprehensive methodic to support decision making based on actual data of the company itself. Based on a careful analysis, taxonomy of costs, revenue streams and decision-making criteria are proposed in the paper. On the basis of multi-criteria decision-making methods, each alternative is evaluated and the alternative with the highest score is identified as the most appropriate. The proposed methodic is implemented as a web application and verified through  case studies.

  20. KAMEDIN: a telemedicine system for computer supported cooperative work and remote image analysis in radiology.

    Science.gov (United States)

    Handels, H; Busch, C; Encarnação, J; Hahn, C; Kühn, V; Miehe, J; Pöppl, S I; Rinast, E; Rossmanith, C; Seibert, F; Will, A

    1997-03-01

    The software system KAMEDIN (Kooperatives Arbeiten und MEdizinische Diagnostik auf Innovativen Netzen) is a multimedia telemedicine system for exchange, cooperative diagnostics, and remote analysis of digital medical image data. It provides components for visualisation, processing, and synchronised audio-visual discussion of medical images. Techniques of computer supported cooperative work (CSCW) synchronise user interactions during a teleconference. Visibility of both local and remote cursor on the conference workstations facilitates telepointing and reinforces the conference partner's telepresence. Audio communication during teleconferences is supported by an integrated audio component. Furthermore, brain tissue segmentation with artificial neural networks can be performed on an external supercomputer as a remote image analysis procedure. KAMEDIN is designed as a low cost CSCW tool for ISDN based telecommunication. However it can be used on any TCP/IP supporting network. In a field test, KAMEDIN was installed in 15 clinics and medical departments to validate the systems' usability. The telemedicine system KAMEDIN has been developed, tested, and evaluated within a research project sponsored by German Telekom.