An Ontology to Support the Classification of Learning Material in an Organizational Learning Environment: An Evaluation

Science.gov (United States)

Valaski, Joselaine; Reinehr, Sheila; Malucelli, Andreia

2017-01-01

Purpose: The purpose of this research was to evaluate whether ontology integrated in an organizational learning environment may support the automatic learning material classification in a specific knowledge area. Design/methodology/approach: An ontology for recommending learning material was integrated in the organizational learning environment…

Social Integration and Domestic Violence Support in an Indigenous Community: Women's Recommendations of Formal Versus Informal Sources of Support.

Science.gov (United States)

Gauthier, G Robin; Francisco, Sara C; Khan, Bilal; Dombrowski, Kirk

2018-05-01

Throughout North America, indigenous women experience higher rates of intimate partner violence and sexual violence than any other ethnic group, and so it is of particular importance to understand sources of support for Native American women. In this article, we use social network analysis to study the relationship between social integration and women's access to domestic violence support by examining the recommendations they would give to another woman in need. We ask two main questions: First, are less integrated women more likely to make no recommendation at all when compared with more socially integrated women? Second, are less integrated women more likely than more integrated women to nominate a formal source of support rather than an informal one? We use network data collected from interviews with 158 Canadian women residing in an indigenous community to measure their access to support. We find that, in general, less integrated women are less likely to make a recommendation than more integrated women. However, when they do make a recommendation, less integrated women are more likely to recommend a formal source of support than women who are more integrated. These results add to our understanding of how access to two types of domestic violence support is embedded in the larger set of social relations of an indigenous community.

Recommended reference materials for realization of physicochemical properties pressure-volume-temperature relationships

CERN Document Server

Herington, E F G

1977-01-01

Recommended Reference Materials for Realization of Physicochemical Properties presents recommendations of reference materials for use in measurements involving physicochemical properties, namely, vapor pressure; liquid-vapor critical temperature and critical pressure; orthobaric volumes of liquid and vapor; pressure-volume-temperature properties of the unsaturated vapor or gas; and pressure-volume-temperature properties of the compressed liquid. This monograph focuses on reference materials for vapor pressures at temperatures up to 770 K, as well as critical temperatures and critical pressures

Readability of Educational Materials to Support Parent Sexual Communication With Their Children and Adolescents.

Science.gov (United States)

Ballonoff Suleiman, Ahna; Lin, Jessica S; Constantine, Norman A

2016-05-01

Sexual communication is a principal means of transmitting sexual values, expectations, and knowledge from parents to their children and adolescents. Many parents seek information and guidance to support talking with their children about sex and sexuality. Parent education materials can deliver this guidance but must use appropriate readability levels to facilitate comprehension and motivation. This study appraised the readability of educational materials to support parent sexual communication with their children. Fifty brochures, pamphlets, and booklets were analyzed using the Flesch-Kincaid, Gunning Fog, and Simple Measure of Gobbledygook (SMOG) index methods. Mean readability grade-level scores were 8.3 (range = 4.5-12.8), 9.7 (range = 5.5-14.9), and 10.1 (range = 6.7-13.9), respectively. Informed by National Institutes of Health-recommended 6th to 7th grade levels and American Medical Association-recommended 5th to 6th grade levels, percentages falling at or below the 7.0 grade level were calculated as 38%, 12%, and 2% and those falling at or below the 6.0 grade level were calculated as 12%, 2%, and 0% based on the Flesch-Kincaid, Gunning Fog, and SMOG methods, respectively. These analyses indicate that the majority of educational materials available online to support parents' communication with their children about sex and sexuality do not meet the needs of many or most parents. Efforts to improve the accessibility of these materials are warranted.

Recommending Education Materials for Diabetic Questions Using Information Retrieval Approaches.

Science.gov (United States)

Zeng, Yuqun; Liu, Xusheng; Wang, Yanshan; Shen, Feichen; Liu, Sijia; Rastegar-Mojarad, Majid; Wang, Liwei; Liu, Hongfang

2017-10-16

Self-management is crucial to diabetes care and providing expert-vetted content for answering patients' questions is crucial in facilitating patient self-management. The aim is to investigate the use of information retrieval techniques in recommending patient education materials for diabetic questions of patients. We compared two retrieval algorithms, one based on Latent Dirichlet Allocation topic modeling (topic modeling-based model) and one based on semantic group (semantic group-based model), with the baseline retrieval models, vector space model (VSM), in recommending diabetic patient education materials to diabetic questions posted on the TuDiabetes forum. The evaluation was based on a gold standard dataset consisting of 50 randomly selected diabetic questions where the relevancy of diabetic education materials to the questions was manually assigned by two experts. The performance was assessed using precision of top-ranked documents. We retrieved 7510 diabetic questions on the forum and 144 diabetic patient educational materials from the patient education database at Mayo Clinic. The mapping rate of words in each corpus mapped to the Unified Medical Language System (UMLS) was significantly different (Pretrieval algorithms. For example, for the top-retrieved document, the precision of the topic modeling-based, semantic group-based, and VSM models was 67.0%, 62.8%, and 54.3%, respectively. This study demonstrated that topic modeling can mitigate the vocabulary difference and it achieved the best performance in recommending education materials for answering patients' questions. One direction for future work is to assess the generalizability of our findings and to extend our study to other disease areas, other patient education material resources, and online forums. ©Yuqun Zeng, Xusheng Liu, Yanshan Wang, Feichen Shen, Sijia Liu, Majid Rastegar Mojarad, Liwei Wang, Hongfang Liu. Originally published in the Journal of Medical Internet Research (http

15 CFR 10.7 - Procedure when a recommended standard is not supported by a consensus.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Procedure when a recommended standard is not supported by a consensus. 10.7 Section 10.7 Commerce and Foreign Trade Office of the Secretary... recommended standard is not supported by a consensus. If the Department determines that a recommended standard...

Hybrid attribute-based recommender system for learning material using genetic algorithm and a multidimensional information model

Directory of Open Access Journals (Sweden)

Mojtaba Salehi

2013-03-01

Full Text Available In recent years, the explosion of learning materials in the web-based educational systems has caused difficulty of locating appropriate learning materials to learners. A personalized recommendation is an enabling mechanism to overcome information overload occurred in the new learning environments and deliver suitable materials to learners. Since users express their opinions based on some specific attributes of items, this paper proposes a hybrid recommender system for learning materials based on their attributes to improve the accuracy and quality of recommendation. The presented system has two main modules: explicit attribute-based recommender and implicit attribute-based recommender. In the first module, weights of implicit or latent attributes of materials for learner are considered as chromosomes in genetic algorithm then this algorithm optimizes the weights according to historical rating. Then, recommendation is generated by Nearest Neighborhood Algorithm (NNA using the optimized weight vectors implicit attributes that represent the opinions of learners. In the second, preference matrix (PM is introduced that can model the interests of learner based on explicit attributes of learning materials in a multidimensional information model. Then, a new similarity measure between PMs is introduced and recommendations are generated by NNA. The experimental results show that our proposed method outperforms current algorithms on accuracy measures and can alleviate some problems such as cold-start and sparsity.

Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5): Recommendations

International Nuclear Information System (INIS)

2011-01-01

This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

Present situation and influence of new ICRP recommendations on radioactive material transport regulations

International Nuclear Information System (INIS)

Hamard, J.; Ringot, C.

1991-01-01

The publication of new ICRP recommendations will involve the revision of IAEA standards and consequently the revision of transport regulations for radioactive materials. Transport regulations are briefly reviewed and application for radiation protection of workers and public is examined. Influence of new recommendations on transport regulations and eventual modifications on classification and transport of materials, packaging design and permissible exposure for workers and public in the prospect of regulation revision forecasted for 1995

Telephone Crisis Support Workers' Intentions to Use Recommended Skills While Experiencing Functional Impairment.

Science.gov (United States)

Kitchingman, Taneile A; Wilson, Coralie J; Woodward, Alan; Caputi, Peter; Wilson, Ian

2018-05-01

Empathic engagement with distressed others can lead to elevated symptoms of psychological distress and functional impairment, which preclude helping professionals' delivery of optimal patient care. Whether telephone crisis support workers are impacted in a similar way is not currently reported in the literature. This study examined the relationship between functional impairment and intentions to use recommended support skills in a representative national sample of 210 telephone crisis support workers. Participants completed an online survey including measures of functional impairment and intentions to use recommended telephone crisis support skills with callers reporting suicidal ideation, symptoms of depression, and anxiety. As a group, participants who experienced greater functional impairment during the past month reported significantly lower intentions to use recommended support skills with callers than those who reported lower functional impairment. Future research is needed to clarify the extent to which results generalize to telephone crisis support workers from other organizations. Results warrant further research to (a) identify determinants of telephone crisis support workers' functional impairment, and (b) for the deliberate management of telephone crisis support workers' functional impairment through developing and/or modifying existing service strategies to optimize workers' psychological well-being and delivery of support to callers.

Recommender System for Sales at Material Store Using Fuzzy Tsukamoto

Directory of Open Access Journals (Sweden)

July Kurniawan

2016-02-01

Full Text Available The retail business has developed very rapidly, especially in Indonesia. One of them is material stores that have not applied the technology and still manual. In this modern era of buying and selling consumers need systems to assist in overcoming problems in terms of recommend items based on customer needs. The aim of this study is to determine the needs of consumers to recommend the necessary consumer goods. This system will simplify these processes, by utilizing information technology using Tsukamoto fuzzy logic. So that consumer demand for faster and more accurate in recommending goods could be accommodated. This research outlines what is needed to overcome the problems that had been experienced by consumers with a lack of information. The recommendations of this study is the form that refers to the percentage of goods from the predictions that have been studied previously.

RECOMMENDED FOUNDATION FILL MATERIALS CONSTRUCTION STANDARD OF THE FLORIDA RADON RESEARCH PROGRAM

Science.gov (United States)

The report summarizes the technical basis for a recommended foundation fill materials standard for new construction houses in Florida. he radon-control construction standard was developed by the Florida Radon Research Program (FRRP). ill material standards are formulated for: (1)...

Defining and Supporting Narrative-driven Recommendation

DEFF Research Database (Denmark)

Bogers, Toine; Koolen, Marijn

2017-01-01

Research into recommendation algorithms has made great strides in recent years. However, these algorithms are typically applied in relatively straightforward scenarios: given information about a user's past preferences, what will they like in the future? Recommendation is often more complex......: evaluating recommended items never takes place in a vacuum, and it is often a single step in the user's more complex background task. In this paper, we define a specific type of recommendation scenario called narrative-driven recommendation, where the recommendation process is driven by both a log...... of the user's past transactions as well as a narrative description of their current interest(s). Through an analysis of a set of real-world recommendation narratives from the LibraryThing forums, we demonstrate the uniqueness and richness of this scenario and highlight common patterns and properties...

Law project on the radioactive materials and wastes management 2006 recommendations presented by Anne Duthilleul

International Nuclear Information System (INIS)

2006-01-01

This document provides recommendations on the law project concerning the radioactive material and wastes management. It precises the law objectives, the french particularities concerning the radioactive wastes and materials management, the public debate in France, the evaluation of the researches, the recommendations of the economic and social council. (A.L.B.)

Review and evaluation of the Nuclear Materials Management and Safeguards System (NMMSS). Volume 1. Comparison of DOE nuclear materials information system requirements with NMMSS capabilities and recommendations for NMMSS improvements

International Nuclear Information System (INIS)

1984-03-01

This report documents the result of a review of the Nuclear Materials Management and Safeguards System (NMMSS), a Department of Energy nuclear materials control and accountability data base and information processing system. This review was performed to determine what data are required from the NMMSS, how it is collected, and how it is used. Based upon the review, NMMSS deficiencies and excess capabilities were identified and a draft set of requirements for the nuclear materials information system that the Office of Safeguards and Security (OSS) should be supporting as well as recommendations for attaining that capability

The Skills, Competences, and Attitude toward Information and Communications Technology Recommender System: an online support program for teachers with personalized recommendations

Science.gov (United States)

Revilla Muñoz, Olga; Alpiste Penalba, Francisco; Fernández Sánchez, Joaquín

2016-01-01

Teachers deal with Information and Communications Technology (ICT) every day and they often have to solve problems by themselves. To help them in coping with this issue, an online support program has been created, where teachers can pose their problems on ICT and they can receive solutions from other teachers. A Recommender System has been defined and implemented into the support program to suggest to each teacher the most suitable solution based on her Skills, Competences, and Attitude toward ICT (SCAT-ICT). The support program has initially been populated with 70 problems from 86 teachers. 30 teachers grouped these problems into six categories with the card-sorting technique. Real solutions to these problems have been proposed by 25 trained teachers. Finally, 17 teachers evaluated the usability of the support program and the Recommender System, where results showed a high score on the standardized System Usability Scale.

Competing infant feeding information in mothers' networks: advice that supports v. undermines clinical recommendations.

Science.gov (United States)

Ashida, Sato; Lynn, Freda B; Williams, Natalie A; Schafer, Ellen J

2016-05-01

To identify the social contextual factors, specifically the presence of information that supports v. undermines clinical recommendations, associated with infant feeding behaviours among mothers in low-income areas. Cross-sectional survey evaluating social support networks and social relationships involved in providing care to the infant along with feeding beliefs and practices. Out-patient paediatric and government-funded (Women, Infants, and Children) clinics in an urban, low-income area of the south-eastern USA. Eighty-one low-income mothers of infants between 0 and 12 months old. Most mothers reported receiving both supportive and undermining advice. The presence of breast-feeding advice that supports clinical recommendations was associated with two infant feeding practices that are considered beneficial to infant health: ever breast-feeding (OR=6·7; 95% CI 1·2, 38·1) and not adding cereal in the infant's bottle (OR=15·9; 95% CI 1·1, 227·4). Advice that undermines clinical recommendations to breast-feed and advice about solid foods were not associated with these behaviours. Efforts to facilitate optimal infant feeding practices may focus on increasing information supportive of clinical recommendations while concentrating less on reducing the presence of undermining information within mothers' networks. Cultural norms around breast-feeding may be stronger than the cultural norms around the introduction of solid foods in mothers' social environments; thus, additional efforts to increase information regarding introduction of solid foods earlier in mothers' infant care career may be beneficial.

E-Learning Recommender System Based on Collaborative Filtering and Ontology

OpenAIRE

John Tarus; Zhendong Niu; Bakhti Khadidja

2017-01-01

In recent years, e-learning recommender systems has attracted great attention as a solution towards addressing the problem of information overload in e-learning environments and providing relevant recommendations to online learners. E-learning recommenders continue to play an increasing educational role in aiding learners to find appropriate learning materials to support the achievement of their learning goals. Although general recommender systems have recorded significant success in solving ...

Longevity of Emplacement Drift Ground Support Materials

International Nuclear Information System (INIS)

D.H.Tang

2001-01-01

The purpose of this analysis is to evaluate the factors affecting the longevity of emplacement drift ground support materials and to develop a basis for the selection of materials for ground support that will function throughout the preclosure period of a potential repository at Yucca Mountain. REV 01 ICN 01 of this analysis is developed in accordance with AP-3.10Q, Analyses and Models, Revision 2, ICN 4, and prepared in accordance with the Technical Work Plan for Subsurface Design Section FY 01 Work Activities (CRWMS M and O 2001a). The objective of this analysis is to update the previous analysis (CRWMS M and O 2000a) to account for related changes in the Ground Control System Description Document (CRWMS M and O 2000b), the Monitored Geologic Repository Project Description Document, which is included in the Requirements and Criteria for Implementing a Repository Design that can be Operated Over a Range of Thermal Modes (BSC 2001), input information, and in environmental conditions, and to provide updated information on candidate ground support materials. Candidate materials for ground support are carbon steel and cement grout. Steel is mainly used for steel sets, lagging, channel, rock bolts, and wire mesh. Cement grout is only considered in the case of grouted rock bolts. Candidate materials for the emplacement drift invert are carbon steel and granular natural material. Materials are evaluated for the repository emplacement drift environment based on the updated thermal loading condition and waste package design. The analysis consists of the following tasks: (1) Identify factors affecting the longevity of ground support materials for use in emplacement drifts. (2) Review existing documents concerning the behavior of candidate ground support materials during the preclosure period. (3) Evaluate impacts of temperature and radiation effects on mechanical and thermal properties of steel. Assess corrosion potential of steel at emplacement drift environment. (4

Recommended welding criteria for use in the fabrication of shipping containers for radioactive materials

International Nuclear Information System (INIS)

Monroe, R.E.; Woo, H.H.; Sears, R.G.

1984-03-01

Welding and related operations are evaluated to assess the controls required to prevent weld-related failure of shipping containers used for transportation of radioactive materials. The report includes (1) recommended criteria for controlling welding as applied to shipping containers and (2) a discussion of modifications of the recommended industry Codes as applied to shipping containers. 13 references, 2 tables

Assessment and recommendations for fissile-material packaging exemptions and general licenses within 10 CFR Part 71

International Nuclear Information System (INIS)

Parks, C.V.; Hopper, C.M.; Lichtenwalter, J.L.

1998-07-01

This report provides a technical and regulatory assessment of the fissile material general licenses and fissile material exemptions within Title 10 of the Code of Federal Regulations Part 71. The assessment included literature studies and calculational analyses to evaluate the technical criteria; review of current industry practice and concerns; and a detailed evaluation of the regulatory text for clarity, consistency and relevance. Recommendations for potential consideration by the Nuclear Regulatory Commission staff are provided. The recommendations call for a simplification and consolidation of the general licenses and a change in the technical criteria for the first fissile material exemptions

Report and Recommendations on Multimedia Materials for Teaching and Learning Quantum Physics

International Nuclear Information System (INIS)

Mason, B.; Debowska, E.; Arpornthip, T.

2015-01-01

An international collaboration of physicists, affiliated with Multimedia Physics for Teaching and Learning (MPTL) and MERLOT, performed a survey and review of multimedia-based learning materials for quantum physics and quantum mechanics. The review process was based on more than a decade of experience with similar topical learning material reviews. A total of approximately 250 items were considered for review and eight were recommended by the reviewers. These are described in this report. Observations about quantum learning resources and multimedia tools are included.

USGEO DMWG Cloud Computing Recommendations

Science.gov (United States)

de la Beaujardiere, J.; McInerney, M.; Frame, M. T.; Summers, C.

2017-12-01

The US Group on Earth Observations (USGEO) Data Management Working Group (DMWG) has been developing Cloud Computing Recommendations for Earth Observations. This inter-agency report is currently in draft form; DMWG hopes to have released the report as a public Request for Information (RFI) by the time of AGU. The recommendations are geared toward organizations that have already decided to use the Cloud for some of their activities (i.e., the focus is not on "why you should use the Cloud," but rather "If you plan to use the Cloud, consider these suggestions.") The report comprises Introductory Material, including Definitions, Potential Cloud Benefits, and Potential Cloud Disadvantages, followed by Recommendations in several areas: Assessing When to Use the Cloud, Transferring Data to the Cloud, Data and Metadata Contents, Developing Applications in the Cloud, Cost Minimization, Security Considerations, Monitoring and Metrics, Agency Support, and Earth Observations-specific recommendations. This talk will summarize the recommendations and invite comment on the RFI.

SeeDB: Efficient Data-Driven Visualization Recommendations to Support Visual Analytics.

Science.gov (United States)

Vartak, Manasi; Rahman, Sajjadur; Madden, Samuel; Parameswaran, Aditya; Polyzotis, Neoklis

2015-09-01

Data analysts often build visualizations as the first step in their analytical workflow. However, when working with high-dimensional datasets, identifying visualizations that show relevant or desired trends in data can be laborious. We propose SeeDB, a visualization recommendation engine to facilitate fast visual analysis: given a subset of data to be studied, SeeDB intelligently explores the space of visualizations, evaluates promising visualizations for trends, and recommends those it deems most "useful" or "interesting". The two major obstacles in recommending interesting visualizations are (a) scale : evaluating a large number of candidate visualizations while responding within interactive time scales, and (b) utility : identifying an appropriate metric for assessing interestingness of visualizations. For the former, SeeDB introduces pruning optimizations to quickly identify high-utility visualizations and sharing optimizations to maximize sharing of computation across visualizations. For the latter, as a first step, we adopt a deviation-based metric for visualization utility, while indicating how we may be able to generalize it to other factors influencing utility. We implement SeeDB as a middleware layer that can run on top of any DBMS. Our experiments show that our framework can identify interesting visualizations with high accuracy. Our optimizations lead to multiple orders of magnitude speedup on relational row and column stores and provide recommendations at interactive time scales. Finally, we demonstrate via a user study the effectiveness of our deviation-based utility metric and the value of recommendations in supporting visual analytics.

RENEWABLE ENERGY SUPPORT MECHANISM IN TURKEY: FINANCIAL ANALYSIS AND RECOMMENDATIONS TO POLICYMAKERS

Directory of Open Access Journals (Sweden)

Mustafa GOZEN

2014-04-01

Full Text Available The Turkish Grand National Parliament passed a renewable energy promotion law that provides feed-in tariffs for electricity generation from renewable energy sources in 2005. This law was not attractive to investors due to the low level of feed-in tariffs. Then, in 2011, the promotion law was amended and a new support scheme integrated in the day-ahead market was introduced. Therefore, the main purpose of this article is to explain the new support mechanism, analyze it from the financial perspective, and discuss the related key issues and challenges. In addition, to further improve the support mechanism, some recommendations have been made to policymakers.

Longevity of Emplacement Drift Ground Support Materials, Rev. 01

International Nuclear Information System (INIS)

David H. Tang

2000-01-01

The purpose of this analysis is to evaluate the factors affecting the longevity of emplacement drift ground support materials and to develop a basis for the selection of materials for ground support that will function throughout the preclosure period of a potential repository at Yucca Mountain. The Development Plan (DP) for this analysis is given in Longevity of Emplacement Drift Ground Support Materials (CRWMS M and O 1999a). The objective of this analysis is to update the previous analysis (CRWMS M and O 2000a) to account for related changes in the Ground Control System Description Document (CRWMS M and O 2000b), the Monitored Geologic Repository Project Description Document (CRWMS M and O 1999b), and in environmental conditions, and to provide updated information on candidate ground support materials. Candidate materials for ground support are carbon steel and cement grout. Steel is mainly used for steel sets, lagging, channel, rock bolts, and wire mesh. Cement grout is only considered in the case of grouted rock bolts. Candidate materials for the emplacement drift invert are carbon steel and crushed rock ballast. Materials are evaluated for the repository emplacement drift environment based on the updated thermal loading condition and waste package design. The analysis consists of the following tasks: (1) Identify factors affecting the longevity of ground support materials for use in emplacement drifts; (2) Review existing documents concerning the behavior of candidate ground support materials during the preclosure period; (3) Evaluate impacts of temperature and radiation effects on mechanical and thermal properties of steel. Assess corrosion potential of steel at emplacement drift environment; (4) Evaluate factors affecting longevity of cement grouts for fully grouted rock bolt system. Provide updated information on cement grout mix design for fully grouted rock bolt system; and (5) Evaluate longevity of materials for the emplacement drift invert

A multi-label learning based kernel automatic recommendation method for support vector machine.

Science.gov (United States)

Zhang, Xueying; Song, Qinbao

2015-01-01

Choosing an appropriate kernel is very important and critical when classifying a new problem with Support Vector Machine. So far, more attention has been paid on constructing new kernels and choosing suitable parameter values for a specific kernel function, but less on kernel selection. Furthermore, most of current kernel selection methods focus on seeking a best kernel with the highest classification accuracy via cross-validation, they are time consuming and ignore the differences among the number of support vectors and the CPU time of SVM with different kernels. Considering the tradeoff between classification success ratio and CPU time, there may be multiple kernel functions performing equally well on the same classification problem. Aiming to automatically select those appropriate kernel functions for a given data set, we propose a multi-label learning based kernel recommendation method built on the data characteristics. For each data set, the meta-knowledge data base is first created by extracting the feature vector of data characteristics and identifying the corresponding applicable kernel set. Then the kernel recommendation model is constructed on the generated meta-knowledge data base with the multi-label classification method. Finally, the appropriate kernel functions are recommended to a new data set by the recommendation model according to the characteristics of the new data set. Extensive experiments over 132 UCI benchmark data sets, with five different types of data set characteristics, eleven typical kernels (Linear, Polynomial, Radial Basis Function, Sigmoidal function, Laplace, Multiquadric, Rational Quadratic, Spherical, Spline, Wave and Circular), and five multi-label classification methods demonstrate that, compared with the existing kernel selection methods and the most widely used RBF kernel function, SVM with the kernel function recommended by our proposed method achieved the highest classification performance.

78 FR 66326 - Hazardous Materials: Rail Petitions and Recommendations To Improve the Safety of Railroad Tank...

Science.gov (United States)

2013-11-05

...: Rail Petitions and Recommendations To Improve the Safety of Railroad Tank Car Transportation (RRR) AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Advance Notice of... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...

Illuminating the Decision Path: The Yucca Mountain Site Recommendation

Energy Technology Data Exchange (ETDEWEB)

Knox, E.; Slothouber, L.

2003-02-25

On February 14, 2002, U.S. Secretary of Energy Spencer Abraham provided to the President the ''Recommendation by the Secretary of Energy Regarding the Suitability of the Yucca Mountain Site for a Repository Under the Nuclear Waste Policy Act of 1982.'' This Recommendation, along with supporting materials, complied with statutory requirements for communicating a site recommendation to the President, and it did more: in 49 pages, the Recommendation also spoke directly to the Nation, illuminating the methodology and considerations that led toward the decision to recommend the site. Addressing technical suitability, national interests, and public concerns, the Recommendation helped the public understand the potential risks and benefits of repository development and placed those risks and benefits in a meaningful national context.

Illuminating the Decision Path: The Yucca Mountain Site Recommendation

International Nuclear Information System (INIS)

Knox, E.; Slothouber, L.

2003-01-01

On February 14, 2002, U.S. Secretary of Energy Spencer Abraham provided to the President the ''Recommendation by the Secretary of Energy Regarding the Suitability of the Yucca Mountain Site for a Repository Under the Nuclear Waste Policy Act of 1982.'' This Recommendation, along with supporting materials, complied with statutory requirements for communicating a site recommendation to the President, and it did more: in 49 pages, the Recommendation also spoke directly to the Nation, illuminating the methodology and considerations that led toward the decision to recommend the site. Addressing technical suitability, national interests, and public concerns, the Recommendation helped the public understand the potential risks and benefits of repository development and placed those risks and benefits in a meaningful national context

THE MATERIAL SUPPORT – SOCIAL, MEDICAL AND FISCAL ASPECTS

OpenAIRE

Rodica CUSMAUNSA; Julia RACHIER; Mihaela ANTONCIUC

2015-01-01

In condition which requires a 'modernization' of the field accounting in Moldova, the authors will try to analyze the material support in terms of new accounting rules, which will come into force without fail since 01.01.2015. We will also make a parallel, at the theoretical level, between Moldova and Romania, regarding the material support provided by managers to their employees. The purpose of this work is to determine what the material support is, how it is reflected in the accounts and ho...

[Current recommendations for basic/advanced life support : Addressing unanswered questions and future prospects].

Science.gov (United States)

Fink, K; Schmid, B; Busch, H-J

2016-11-01

The revised guidelines for cardiopulmonary resuscitation were implemented by the European Resuscitation Council (ERC) in October 2015. There were few changes concerning basic and advanced life support; however, some issues were clarified compared to the ERC recommendations from 2010. The present paper summarizes the procedures of basic and advanced life support according to the current guidelines and highlights the updates of 2015. Furthermore, the article depicts future prospects of cardiopulmonary resuscitation that may improve outcome of patients after cardiac arrest in the future.

Evaluation and recommendations for work group integration within the Materials and Processes Lab

Science.gov (United States)

Farrington, Phillip A.

1992-01-01

The goal of this study was to evaluate and make recommendations for improving the level of integration of several work groups within the Materials and Processes Lab at the Marshall Space Flight Center. This evaluation has uncovered a variety of projects that could improve the efficiency and operation of the work groups as well as the overall integration of the system. In addition, this study provides the foundation for specification of a computer integrated manufacturing test bed environment in the Materials and Processes Lab.

Mobile Clinical Decision Support System for Acid-base Balance Diagnosis and Treatment Recommendation.

Science.gov (United States)

Mandzuka, Mensur; Begic, Edin; Boskovic, Dusanka; Begic, Zijo; Masic, Izet

2017-06-01

This paper presents mobile application implementing a decision support system for acid-base disorder diagnosis and treatment recommendation. The application was developed using the official integrated development environment for the Android platform (to maximize availability and minimize investments in specialized hardware) called Android Studio. The application identifies disorder, based on the blood gas analysis, evaluates whether the disorder has been compensated, and based on additional input related to electrolyte imbalance, provides recommendations for treatment. The application is a tool in the hands of the user, which provides assistance during acid-base disorders treatment. The application will assist the physician in clinical practice and is focused on the treatment in intensive care.

Social network supported process recommender system.

Science.gov (United States)

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Social Network Supported Process Recommender System

Directory of Open Access Journals (Sweden)

Yanming Ye

2014-01-01

Full Text Available Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Promoting Mental Health in Unaccompanied Refugee Minors: Recommendations for Primary Support Programs

Science.gov (United States)

El-Awad, Usama; Petermann, Franz; Reinelt, Tilman

2017-01-01

During the last years, the number of refugees around the world increased to about 22.5 million. The mental health of refugees, especially of unaccompanied minors (70% between the ages of 16 and 18 years) who have been exposed to traumatic events (e.g., war), is generally impaired with symptoms of post-traumatic stress disorder, depression, and anxiety. Several studies revealed (1) a huge variation among the prevalence rates of these mental problems, and (2) that post-migration stressors (e.g., language barriers, cultural differences) might be at least as detrimental to mental health as the traumatic events in pre- and peri-flight. As psychotherapy is a limited resource that should be reserved for severe cases and as language trainings are often publicly offered for refugees, we recommend focusing on intercultural competence, emotion regulation, and goal setting and goal striving in primary support programs: Intercultural competence fosters adaptation by giving knowledge about cultural differences in values and norms. Emotion regulation regarding empathy, positive reappraisal, and cultural differences in emotion expression fosters both adaptation and mental health. Finally, supporting unaccompanied refugee minors in their goal setting and goal striving is necessary, as they carry many unrealistic wishes and unattainable goals, which can be threatening to their mental health. Building on these three psychological processes, we provide recommendations for primary support programs for unaccompanied refugee minors that are aged 16 to 18 years. PMID:29104237

Promoting Mental Health in Unaccompanied Refugee Minors: Recommendations for Primary Support Programs

Directory of Open Access Journals (Sweden)

Usama El-Awad

2017-11-01

Full Text Available During the last years, the number of refugees around the world increased to about 22.5 million. The mental health of refugees, especially of unaccompanied minors (70% between the ages of 16 and 18 years who have been exposed to traumatic events (e.g., war, is generally impaired with symptoms of post-traumatic stress disorder, depression, and anxiety. Several studies revealed (1 a huge variation among the prevalence rates of these mental problems, and (2 that post-migration stressors (e.g., language barriers, cultural differences might be at least as detrimental to mental health as the traumatic events in pre- and peri-flight. As psychotherapy is a limited resource that should be reserved for severe cases and as language trainings are often publicly offered for refugees, we recommend focusing on intercultural competence, emotion regulation, and goal setting and goal striving in primary support programs: Intercultural competence fosters adaptation by giving knowledge about cultural differences in values and norms. Emotion regulation regarding empathy, positive reappraisal, and cultural differences in emotion expression fosters both adaptation and mental health. Finally, supporting unaccompanied refugee minors in their goal setting and goal striving is necessary, as they carry many unrealistic wishes and unattainable goals, which can be threatening to their mental health. Building on these three psychological processes, we provide recommendations for primary support programs for unaccompanied refugee minors that are aged 16 to 18 years.

Metallic and Non-Metallic Materials for the Primary Support Structure

International Nuclear Information System (INIS)

RA Wolf; RP Corson

2006-01-01

The primary support structure (PSS) is required for mechanical support of reactor module (RM) components and mounting of the RM to the spacecraft. The PSS would provide support and accept all loads associated with dynamic (e. g., launch and maneuvering) or thermally induced loading. Prior to termination of NRPCT involvement in Project Prometheus, the NRPCT Mechanical Systems team developed preliminary finite element models to gain a basic understanding of the behavior of the structure, but optimization of the models, specification of the final design, and materials selection were not completed. The Space Plant Materials team had evaluated several materials for potential use in the primary support structure, namely titanium alloys, beryllium, aluminum alloys and carbon-carbon composites. The feasibility of application of each material system was compared based on mass, stiffness, thermal expansion, and ease of fabrication. Due to insufficient data on environmental factors, such as temperatures and radiation, and limited modeling support, a final materials selection was not made

Long-term Mechanical Circulatory Support System reliability recommendation by the National Clinical Trial Initiative subcommittee.

Science.gov (United States)

Lee, James

2009-01-01

The Long-Term Mechanical Circulatory Support (MCS) System Reliability Recommendation was published in the American Society for Artificial Internal Organs (ASAIO) Journal and the Annals of Thoracic Surgery in 1998. At that time, it was stated that the document would be periodically reviewed to assess its timeliness and appropriateness within 5 years. Given the wealth of clinical experience in MCS systems, a new recommendation has been drafted by consensus of a group of representatives from the medical community, academia, industry, and government. The new recommendation describes a reliability test methodology and provides detailed reliability recommendations. In addition, the new recommendation provides additional information and clinical data in appendices that are intended to assist the reliability test engineer in the development of a reliability test that is expected to give improved predictions of clinical reliability compared with past test methods. The appendices are available for download at the ASAIO journal web site at www.asaiojournal.com.

Nuclear Security Recommendations on Radioactive Material and Associated Facilities: Recommendations (Spanish Edition); Recomendaciones de Seguridad Fisica Nuclear sobre Materiales Radiactivos e Instalaciones Conexas: Recomendaciones

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-15

The purpose of this publication is to provide guidance to States and competent authorities on how to develop or enhance, implement and maintain a nuclear security regime for facilities dealing with radioactive material and associated activities. This is to be achieved through the establishment or improvement of their capabilities to implement a legislative and regulatory framework to address the security of radioactive material, associated facilities and associated activities in order to reduce the likelihood of malicious acts involving those materials. These recommendations reflect a broad consensus among States on the requirements which should be met for the security of radioactive material, associated facilities and activities.

The final recommendations of the ASIEPI project

DEFF Research Database (Denmark)

Thomsen, Kirsten Engelund; Rose, Jørgen; Aggerholm, Søren

requirements; • impact, compliance and control of legislation; • effective handling of thermal bridges; • stimulation of good building and ductwork airtightness; • support for the market uptake for innovative systems; • stimulation of better summer comfort and efficient cooling. This report compiles the major...... findings and recommendations for each of these 6 topics. It also gives an overview of all other project materials, and thus helps the reader to quickly pinpoint the material most relevant to his/her question at any given time....

Application in localization of the material used for CRDM seismic support

International Nuclear Information System (INIS)

Wang Qingtian; He Peifeng; Mu Dianpeng

2011-01-01

CRDM seismic support stand in the top of reactor vessel head, and belong to LS equipment. Now all of the manufacture of CRDM seismic support are in China, so the materials localization of CRDM seismic support is quite vital. Comparing with chemical requirements, mechanical properties and hardness between foreign and domestic equipment material, the paper bring forward the base material and welding material. At last, mechanical analysis is adopted, and the result indicates the material localization meet the design requirements. (authors)

Supporting PECO countries in combating illicit trafficking of nuclear materials - Status of ongoing projects

International Nuclear Information System (INIS)

Janssens, W.; Daures, P.; Cromboom, O.; Mayer, K.; Koch, L.

2001-01-01

Full text: In order to support the development of an efficient and validated response to counteract illicit trafficking of nuclear materials in the EU, the candidate countries and some CIS countries, ITU is currently executing a series of dedicated projects with the Candidate Countries to the European Union, based upon the experience gained in previous Phare and Tacis projects. Following the recommendations of the International Technical Working Group (ITWG), the objectives of the projects are: assessment of the national situation during a fact-finding mission in the country; technical upgrade and/or training related to the categorisation of nuclear material on the spot and assistance for the identification of seized nuclear material, through joint analysis at ITU; implementation of the recommended Model Action Plan in the form of a national handbook called RITNUM (Response to Illicit Trafficking of NUclear Material); validation of the national Model Action Plan by the organisation of a demonstration exercise in the country involving all the identified services in the field. After a kick-off meeting held in Karlsruhe in November 2000 and attended by two participants of each country, 5 fact-finding missions have been already performed (Romania, Slovenia and the three Baltic States). A general meeting with all the involved parties (Customs, Police, Intelligence services. Health Physics, Nuclear reference laboratory...) was organised to describe the procedure of the integrated response and the national needs were assessed. The corresponding training sessions are planed in January 2002 at ITU for three participants for each country (Customs and Police officer and high level scientist dealing with nuclear measurements). This training session will be organised and supported by IAEA which have a common interest through its Regional Program on Combating Illicit Trafficking (RER60). This joint action will be extended to other eastern countries (ex. Belarus) on IAEA request

Let’s Free IT Support Materials!

OpenAIRE

Kelly, B; Knight, G; Casey, J; Guy, M

2005-01-01

The Open Access movement is promoting the advantages in providing more liberal access conditions to research and teaching and learning resources and is developing a legal infrastructure and associated technologies to support this. This paper argues that IT Services can benefit by adopting a similar approach for IT support materials. A case study is provided which describes the rationale for making the resources developed by the JISC-funded QA Focus project available under a Creative Commons l...

Additive Manufacturing of Overhang Structures Using Moisture-Cured Silicone with Support Material

Directory of Open Access Journals (Sweden)

Mohan Muthusamy

2018-04-01

Full Text Available Additive manufacturing (AM of soft materials has a wide variety of applications, such as customized or wearable devices. Silicone is one popular material for these applications given its favorable material properties. However, AM of silicone parts with overhang structures remains challenging due to the soft nature of the material. Overhang structures are the areas where there is no underlying structure. Typically, a support material is used and built in the underlying space so that the overhang structures can be built upon it. Currently, there is no support structure that has been used for AM of silicone. The goal of this study is to develop an AM process to fabricate silicone parts with overhang structures. We first identified and confirmed poly-vinyl alcohol (PVA, a water-soluble material, as a suitable support material for silicone by evaluating the adhesion strength between silicone and PVA. Process parameters for the support material, including critical overhang angle and minimum infill density for the support material, are identified. However, overhang angle alone is not the only determining factor for support material. As silicone is a soft material, it deflects due to its own weight when the height of the overhang structure increases. A finite element model is developed to estimate the critical overhang height paired with different overhang angles to determine whether the use of support material is needed. Finally, parts with overhang structures are printed to demonstrate the capability of the developed process.

Recommendations for Future Army Analysis Efforts. Volume 4. Key Questions and Recommendations for Future Analysis Efforts on Explaining the Army and Supporting the Soldier

Science.gov (United States)

1988-04-14

McDonalds or Burger King for snack shops, Marriott for messing/billeting facilities, etc.? RECOMMENDED ELEMENTS OF ANALYSIS/TOPICAL AREAS: DATE RESULTS ITEM...e.g., a Burger King on post) now brings in about SI million per month to the family support coffers. It began in 1984 and has returned $21 million...Army, private sector franchises and family support. - The first or leading question is whether the family affects retention and, if so, what the Army

Nuclear Security Recommendations on Nuclear and other Radioactive Material out of Regulatory Control: Recommendations (Spanish Edition); Recomendaciones de Seguridad Fisica Nuclear sobre Materiales Nucleares y otros Materiales Radiactivos no sometidos a Control Reglamentario: Recomendaciones

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-15

This publication presents recommendations for the nuclear security of nuclear and other radioactive material that is out of regulatory control. It is based on national experiences and practices and guidance publications in the field of security as well as the nuclear security related international instruments. The recommendations include guidance for States with regard to the nuclear security of nuclear and other radioactive material that has been reported as being out of regulatory control as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. In addition, these recommendations adhere to the detection and assessment of alarms and alerts and to a graded response to criminal or unauthorized acts with nuclear security implications.

Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

Energy Technology Data Exchange (ETDEWEB)

Meuwisse, C; Despujols, A [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

1999-12-31

The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

Energy Technology Data Exchange (ETDEWEB)

Meuwisse, C.; Despujols, A. [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B. [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L. [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

1998-12-31

The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

Logistic management materials-technical support railway enterprises

OpenAIRE

Dykan, V.; Borozenetc, T.

2014-01-01

The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

Detection of heat abduction on the walls by artificial neural network and selection of materials with decision support system

Directory of Open Access Journals (Sweden)

Egemen Tekkanat

2017-08-01

Full Text Available Today energy conservation is a very important issue in the world and Turkey. The aim of this study is to minimize the heat abduction, thus to save energy by utilizing the factors to prevent the heat abduction on the walls of buildings. First of all, a back-propagation network model with artificial neural network model was used for the factors that can cause heat loss on the walls. Whether the walls have insulation were considered. After that, Decision Support Systems were used for heat insulation to select the appropriate materials. A Decision Support Model with Analytic Hierarchy Process (AHP was recommended to meet the needs of a customer best and to make better decisions for the selection of the materials. The method was used by construction firms for their decision processes for the best materials and the results were evaluated. After the evaluations were done, the factors that cause heat loss were considered and it became clear which factors were more important for the prevention of heat loss.

Corrosion performance of tube support materials

International Nuclear Information System (INIS)

Malagola, P.

1985-01-01

The problem of denting in steam generators leads to change in the conception of the tube support plates. A new material is now used for this component, a 13% Cr steel, which composition has been adjusted for weldability and mechanical resistance criteria. The geometry of trefoil support plate (TSP) has also been improved, using a broached TSP (quadrifoiled holes) instead of a drilled TSP. Tests have been performed on 13% Cr and C-steel broached TSP, and drilled TSP, to confirm the better resistance to denting of this new configuration

Survey of Technetium Analytical Production Methods Supporting Hanford Nuclear Materials Processing

International Nuclear Information System (INIS)

TROYER, G.L.

1999-01-01

This document provides a historical survey of analytical methods used for measuring 99 Tc in nuclear fuel reprocessing materials and wastes at Hanford. Method challenges including special sludge matrices tested are discussed. Special problems and recommendations are presented

How Materials Support Conceptual Blending in Ideation

DEFF Research Database (Denmark)

Biskjaer, Michael Mose; Fischel, Aron Daniel; Dove, Graham

2018-01-01

as an explanatory model to pry open the complexity of this activity, showing how research on design materials improves insight into how a design concept emerges. We show this empirically in a second-by- second analysis of a card-based design ideation episode using a multi-touch surface table. We offer process......-analytical evidence for the case that manipulation of design materials helps stabilize an emerging concept, as conceptual blending research has shown by analyzing artifacts, and extend this work by showing the dynamic interplay between the emerging conceptual blend and participants’ collaborative interaction...... with the materials. Our study advances understanding of interaction with materials in design ideation and aims to facilitate future research on how materials support conceptual blending as a useful model of how design concepts emerge....

Towards meaningful medication-related clinical decision support: recommendations for an initial implementation.

Science.gov (United States)

Phansalkar, S; Wright, A; Kuperman, G J; Vaida, A J; Bobb, A M; Jenders, R A; Payne, T H; Halamka, J; Bloomrosen, M; Bates, D W

2011-01-01

Clinical decision support (CDS) can improve safety, quality, and cost-effectiveness of patient care, especially when implemented in computerized provider order entry (CPOE) applications. Medication-related decision support logic forms a large component of the CDS logic in any CPOE system. However, organizations wishing to implement CDS must either purchase the computable clinical content or develop it themselves. Content provided by vendors does not always meet local expectations. Most organizations lack the resources to customize the clinical content and the expertise to implement it effectively. In this paper, we describe the recommendations of a national expert panel on two basic medication-related CDS areas, specifically, drug-drug interaction (DDI) checking and duplicate therapy checking. The goals of this study were to define a starter set of medication-related alerts that healthcare organizations can implement in their clinical information systems. We also draw on the experiences of diverse institutions to highlight the realities of implementing medication decision support. These findings represent the experiences of institutions with a long history in the domain of medication decision support, and the hope is that this guidance may improve the feasibility and efficiency CDS adoption across healthcare settings.

Radiological Operations Support Specialist (ROSS) Pilot Course Summary and Recommendations

Energy Technology Data Exchange (ETDEWEB)

Alai, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Askin, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Buddemeier, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wogan, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Doshi, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tai, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-09-30

In support of the Department of Homeland Security / Science and Technology Directorate’s (DHS/S&T) creation of a new position called the Radiological Operations Support Specialist (ROSS), Lawrence Livermore National Laboratory (LLNL) in Sub-task 1.1 and 1.2 has assisted in the development of the ROSS skills, knowledge, and abilities (SKAs); identified potentially relevant training; cross-mapped the training to the SKAs; and identified gaps in the training related to the SKAs, as well as their respective level of training knowledge - current versus desired. In the follow on task, Sub-task 1.3, a 5 day ROSS Pilot Training course was developed to fill the priority gaps identified in Sub-Task 1.2. Additionally, in Sub-Task 1.5, LLNL has performed a gap analysis of electronic tools, handbooks, and job-aides currently available to the ROSS and developed recommendations for additional and next generation tools to ensure the operational effectiveness of the ROSS position. This document summarizes the feedback received from the instructors and pilot course observers on what worked in the course and what could be improved as well as an assessment of the Pre- and Post-Test administered to the students.

Radiological Operations Support Specialist (ROSS) Pilot Course Summary and Recommendations

International Nuclear Information System (INIS)

Alai, M.; Askin, A.; Buddemeier, B.; Wogan, L.; Doshi, P.; Tai, L.

2016-01-01

In support of the Department of Homeland Security / Science and Technology Directorate's (DHS/S&T) creation of a new position called the Radiological Operations Support Specialist (ROSS), Lawrence Livermore National Laboratory (LLNL) in Sub-task 1.1 and 1.2 has assisted in the development of the ROSS skills, knowledge, and abilities (SKAs); identified potentially relevant training; cross-mapped the training to the SKAs; and identified gaps in the training related to the SKAs, as well as their respective level of training knowledge - current versus desired. In the follow on task, Sub-task 1.3, a 5 day ROSS Pilot Training course was developed to fill the priority gaps identified in Sub-Task 1.2. Additionally, in Sub-Task 1.5, LLNL has performed a gap analysis of electronic tools, handbooks, and job-aides currently available to the ROSS and developed recommendations for additional and next generation tools to ensure the operational effectiveness of the ROSS position. This document summarizes the feedback received from the instructors and pilot course observers on what worked in the course and what could be improved as well as an assessment of the Pre- and Post-Test administered to the students.

Recommender Systems for Learning

CERN Document Server

Manouselis, Nikos; Verbert, Katrien; Duval, Erik

2013-01-01

Technology enhanced learning (TEL) aims to design, develop and test sociotechnical innovations that will support and enhance learning practices of both individuals and organisations. It is therefore an application domain that generally covers technologies that support all forms of teaching and learning activities. Since information retrieval (in terms of searching for relevant learning resources to support teachers or learners) is a pivotal activity in TEL, the deployment of recommender systems has attracted increased interest. This brief attempts to provide an introduction to recommender systems for TEL settings, as well as to highlight their particularities compared to recommender systems for other application domains.

Evaluation and analysis of USNRC material accounting to support an upgrade rule reducing the threat of insider falsification

International Nuclear Information System (INIS)

McDonnel, J.L.; Chilton, P.D.; Kufahl, G.E.; Vergari, A.A.

1980-01-01

The April 1978, NRC MCandA Task Force Report identified weaknesses in current material accounting (MA) systems. The current study is an effort which examines the generic system vulnerabilities and develops or recommends 1) concepts, principles and methods for protecting MA data from falsification, 2) MA checks and balances for detecting theft or diversion and 3) MA organizational criteria which support safeguards effectiveness. The effect of implementation of developed safeguards protection principles is reported together with a graphic procedure which facilitates analysis and comprehension of results. 2 refs

Practical Recommendations to Improve the Quality of Training and Methodical Support of Professional Teacher Education

Science.gov (United States)

Grebennikov, Valery V.; Grudtsina, Ludmila Yu.; Marchuk, Nikolay N.; Sangadgiev, Badma V.; Kudyashev, Nail K.

2016-01-01

The research urgency is caused by the transition to the knowledge society and new demands for training and methodical provision of professional pedagogical education. The purpose of this paper is to develop practical recommendations to improve the quality of training and methodical support of professional pedagogical education. The leading…

Health status, adherence with health recommendations, self-efficacy and social support in patients with rheumatoid arthritis

NARCIS (Netherlands)

Taal, Erik; Rasker, Johannes J.; Seydel, E.R.; Wiegman, O.

1993-01-01

A study was performed in 86 patients with rheumatoid arthritis (RA) to assess their health problems, the problems they experience in adhering to health recommendations and the relationships of these problems with self-efficacy and social support. Feeling dependent, disability and pain were the most

Hanford spent nuclear fuel project recommended path forward, volume III: Alternatives and path forward evaluation supporting documentation

International Nuclear Information System (INIS)

Fulton, J.C.

1994-10-01

Volume I of the Hanford Spent Nuclear Fuel Project - Recommended Path Forward constitutes an aggressive series of projects to construct and operate systems and facilities to safely retrieve, package, transport, process, and store K Basins fuel and sludge. Volume II provided a comparative evaluation of four Alternatives for the Path Forward and an evaluation for the Recommended Path Forward. Although Volume II contained extensive appendices, six supporting documents have been compiled in Volume III to provide additional background for Volume II

DNFSB recommendation 94-1 Hanford site integrated stabilization management plan

Energy Technology Data Exchange (ETDEWEB)

McCormack, R.L.

1997-05-07

In May 1994, the Defense Nuclear Facilities Safety Board (DNFSB) issued DNFSB Recommendation 94-1 (Conway 1994), which identified concerns related to US Department of Energy (DOE) management of legacy fissile materials remaining from past defense production activities. The DNFSB expressed concern about the existing storage conditions for these materials and the slow pace at which the conditions were being remediated. The DNFSB also expressed its belief that additional delays in stabilizing these fissile materials would be accompanied by further deterioration of safety and unnecessary increased risks to workers and the public. In February 1995, DOE issued the DNFSB Recommendation 94-1 Implementation Plan (O`Leary 1995) to address the concerns identified in DNFSB Recommendation 94-1. The Implementation Plan (IP) identifies several DOE commitments to achieve safe interim storage for the legacy fissile materials, and constitutes DOE`s baseline DNFSB Recommendation 94-1 Integrated Program Plan (IPP). The IPP describes the actions DOE plans to implement within the DOE complex to convert its excess fissile materials to forms or conditions suitable for safe interim storage. The IPP was subsequently supplemented with an Integrated Facilities Plan and a Research and Development Plan, which further develop complex-wide research and development and long-range facility requirements and plans. The additions to the baseline IPP were developed based on a systems engineering approach that integrated facilities and capabilities at the various DOE sites and focused on attaining safe interim storage with minimum safety risks and environmental impacts. Each affected DOE site has developed a Site Integrated Stabilization Management Plan (SISMP) to identify individual site plans to implement the DNFSB Recommendation 94-1 IPP. The SISMPs were developed based on the objectives, requirements, and commitments identified in the DNFSB Recommendation 94-1 IP. The SISMPs also supported

DNFSB recommendation 94-1 Hanford site integrated stabilization management plan

International Nuclear Information System (INIS)

McCormack, R.L.

1997-01-01

In May 1994, the Defense Nuclear Facilities Safety Board (DNFSB) issued DNFSB Recommendation 94-1 (Conway 1994), which identified concerns related to US Department of Energy (DOE) management of legacy fissile materials remaining from past defense production activities. The DNFSB expressed concern about the existing storage conditions for these materials and the slow pace at which the conditions were being remediated. The DNFSB also expressed its belief that additional delays in stabilizing these fissile materials would be accompanied by further deterioration of safety and unnecessary increased risks to workers and the public. In February 1995, DOE issued the DNFSB Recommendation 94-1 Implementation Plan (O'Leary 1995) to address the concerns identified in DNFSB Recommendation 94-1. The Implementation Plan (IP) identifies several DOE commitments to achieve safe interim storage for the legacy fissile materials, and constitutes DOE's baseline DNFSB Recommendation 94-1 Integrated Program Plan (IPP). The IPP describes the actions DOE plans to implement within the DOE complex to convert its excess fissile materials to forms or conditions suitable for safe interim storage. The IPP was subsequently supplemented with an Integrated Facilities Plan and a Research and Development Plan, which further develop complex-wide research and development and long-range facility requirements and plans. The additions to the baseline IPP were developed based on a systems engineering approach that integrated facilities and capabilities at the various DOE sites and focused on attaining safe interim storage with minimum safety risks and environmental impacts. Each affected DOE site has developed a Site Integrated Stabilization Management Plan (SISMP) to identify individual site plans to implement the DNFSB Recommendation 94-1 IPP. The SISMPs were developed based on the objectives, requirements, and commitments identified in the DNFSB Recommendation 94-1 IP. The SISMPs also supported

Effects of catalyst-support materials on the performance of fuel cells

CSIR Research Space (South Africa)

Ejikeme, PM

2016-07-01

Full Text Available The operating life of a fuel cell is expected to be thousands of hours. One of the critical components of the fuel cell that will allow for such long-life cycle is the catalyst-support material. The support material is expected, amongst others...

Porous Materials to Support Bilayer Lipid Membranes for Ion Channel Biosensors

Directory of Open Access Journals (Sweden)

Thai Phung

2011-01-01

Full Text Available To identify materials suitable as membrane supports for ion channel biosensors, six filter materials of varying hydrophobicity, tortuosity, and thickness were examined for their ability to support bilayer lipid membranes as determined by electrical impedance spectroscopy. Bilayers supported by hydrophobic materials (PTFE, polycarbonate, nylon, and silanised silver had optimal resistance (14–19 GΩ and capacitance (0.8–1.6 μF values whereas those with low hydrophobicity did not form BLMs (PVDF or were short-lived (unsilanised silver. The ability of ion channels to function in BLMs was assessed using a method recently reported to improve the efficiency of proteoliposome incorporation into PTFE-supported bilayers. Voltage-gated sodium channel activation by veratridine and inhibition by saxitoxin showed activity for PTFE, nylon, and silanised silver, but not polycarbonate. Bilayers on thicker, more tortuous, and hydrophobic materials produced higher current levels. Bilayers that self-assembled on PTFE filters were the longest lived and produced the most channel activity using this method.

Anisotropic microporous supports impregnated with polymeric ion-exchange materials

Science.gov (United States)

Friesen, Dwayne; Babcock, Walter C.; Tuttle, Mark

1985-05-07

Novel ion-exchange media are disclosed, the media comprising polymeric anisotropic microporous supports containing polymeric ion-exchange or ion-complexing materials. The supports are anisotropic, having small exterior pores and larger interior pores, and are preferably in the form of beads, fibers and sheets.

Safe Transport of Radioactive Material, International Regulations and its Supporting Documents

International Nuclear Information System (INIS)

El-Shinawy, R.M.K.

2005-01-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1 ( ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series No 7 and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series No 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS=113), compliance assurance (SS=112), the training manual and other

Safe Transport of Radioactive Material, International Regulations and its Supporting Documents

Energy Technology Data Exchange (ETDEWEB)

El-Shinawy, R M.K. [Radiation Protection Dept., NRC, Atomic Energy Authority, Cairo (Egypt)

2005-04-01

Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1 ( ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series No 7 and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series No 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS=113), compliance assurance (SS=112), the training manual and other.

A general overview of support materials for enzyme immobilization: Characteristics, properties, practical utility

DEFF Research Database (Denmark)

Zdarta, Jakub; Meyer, Anne S.; Jesionowski, Teofil

2018-01-01

on the properties of the produced catalytic system. A large variety of inorganic and organic as well as hybrid and composite materials may be used as stable and efficient supports for biocatalysts. This review provides a general overview of the characteristics and properties of the materials applied for enzyme...... immobilization. For the purposes of this literature study, support materials are divided into two main groups, called Classic and New materials. The review will be useful in selection of appropriate support materials with tailored properties for the production of highly effective biocatalytic systems for use...

The anterior lens capsule used as support material in RPE cell-transplantation

DEFF Research Database (Denmark)

Nicolini, J; Kiilgaard, Jens Folke; Wiencke, A K

2000-01-01

To investigate the use of an ocular basement membrane as support material for transplanted porcine RPE cells.......To investigate the use of an ocular basement membrane as support material for transplanted porcine RPE cells....

Recommendations for computer modeling codes to support the UMTRA groundwater restoration project

Energy Technology Data Exchange (ETDEWEB)

Tucker, M.D. [Sandia National Labs., Albuquerque, NM (United States); Khan, M.A. [IT Corp., Albuquerque, NM (United States)

1996-04-01

The Uranium Mill Tailings Remediation Action (UMTRA) Project is responsible for the assessment and remedial action at the 24 former uranium mill tailings sites located in the US. The surface restoration phase, which includes containment and stabilization of the abandoned uranium mill tailings piles, has a specific termination date and is nearing completion. Therefore, attention has now turned to the groundwater restoration phase, which began in 1991. Regulated constituents in groundwater whose concentrations or activities exceed maximum contaminant levels (MCLs) or background levels at one or more sites include, but are not limited to, uranium, selenium, arsenic, molybdenum, nitrate, gross alpha, radium-226 and radium-228. The purpose of this report is to recommend computer codes that can be used to assist the UMTRA groundwater restoration effort. The report includes a survey of applicable codes in each of the following areas: (1) groundwater flow and contaminant transport modeling codes, (2) hydrogeochemical modeling codes, (3) pump and treat optimization codes, and (4) decision support tools. Following the survey of the applicable codes, specific codes that can best meet the needs of the UMTRA groundwater restoration program in each of the four areas are recommended.

Recommendations for computer modeling codes to support the UMTRA groundwater restoration project

International Nuclear Information System (INIS)

Tucker, M.D.; Khan, M.A.

1996-04-01

The Uranium Mill Tailings Remediation Action (UMTRA) Project is responsible for the assessment and remedial action at the 24 former uranium mill tailings sites located in the US. The surface restoration phase, which includes containment and stabilization of the abandoned uranium mill tailings piles, has a specific termination date and is nearing completion. Therefore, attention has now turned to the groundwater restoration phase, which began in 1991. Regulated constituents in groundwater whose concentrations or activities exceed maximum contaminant levels (MCLs) or background levels at one or more sites include, but are not limited to, uranium, selenium, arsenic, molybdenum, nitrate, gross alpha, radium-226 and radium-228. The purpose of this report is to recommend computer codes that can be used to assist the UMTRA groundwater restoration effort. The report includes a survey of applicable codes in each of the following areas: (1) groundwater flow and contaminant transport modeling codes, (2) hydrogeochemical modeling codes, (3) pump and treat optimization codes, and (4) decision support tools. Following the survey of the applicable codes, specific codes that can best meet the needs of the UMTRA groundwater restoration program in each of the four areas are recommended

Implications of the Recommendations of the Expert Panel on Federal Support to Research and Development

Directory of Open Access Journals (Sweden)

Preston Manning

2012-03-01

Full Text Available Canada lags behind many of its First World counterparts when it comes to business innovation, and urgently needs to improve its performance if it is to remain competitive and attractive to investment. The Expert Panel Report on Federal Support to Research and Development has recommended several policy initiatives that governments need to enact to close the gap. This paper reviews all six major recommendations made by the Expert Panel and provides thorough assessments of each, with ample consideration given to their implications for the private sector. The two most promising are: (1 the consolidation of research and development spending programs at the federal level and (2 the adoption of smart procurement as a means of spurring innovation in the non-government sector. While some of the other recommendations need refinement and raise concerns about their impact on the economy, the message for government and business is clear: the former can and should facilitate Canadian business innovation by removing tax and regulatory burdens and facilitating better public-private cooperation, while the latter must make innovation a major part of corporate culture. This paper explains the consequences of the Panel’s recommendations for both sectors, identifies the deficiencies, and offers clear-eyed guidance for ameliorating them.

Recommendations on the measurement of irradiation received by the structural materials of reactors

International Nuclear Information System (INIS)

Genthon, J.P.; Mas, P.; Wright, S.B.; Zijp, W.L.

1975-01-01

The recommendations have been compiled by a working group Radiation Damage which has been set up by the Euratom Working Group for reactor Dosimetry. The parameters are indicated which must be defined for the characterisation of the neutron dose causing radiation-induced damage in construction materials important for reactor technique. Following an explanation of some theoretical aspects, practical guidelines for neutron metrology on irradiation of graphite and of metals are given. A thorough knowledge of the spectrum of the incident neutrons is required for a proper interpretation of the results of irradiation experiments

Are current coaching recommendations for cricket batting technique supported by biomechanical research?

Science.gov (United States)

Penn, Melissa J; Spratford, Wayne

2012-09-01

Coaching manuals are an invaluable tool for coaches, used in player skill and technique development, especially at grass-roots level. Commonly developed by former players and coaches, this information is generally based on anecdotal evidence and in general lacks the scientific rigour of a peer-reviewed journal. Thus there is a need to establish the level of agreement and support between the coaching and biomechanical literature. In doing so, evidence-based coaching practices can be optimally developed. Moreover, this will ensure the technique and skill development practices implemented at grass-roots level are supported by successful performance in the later stages of player development. The purpose of this review was to evaluate the latest batting biomechanics research, providing a comprehensive and up-to-date insight into the kinematic and kinetic aspects of batting in cricket. Furthermore, this review compared and contrasted this research with a selection of coaching literature, establishing a strong level of support and agreement between the coaching and biomechanical literature in recommendations for cricket batting technique. Although the ambiguity in a number of coaching concepts still exists, coaches and players can be confident in the successful implementation of both sources of information in a player's technical development.

Investigation of altenative carbon materials for fuel-cell catalyst support

DEFF Research Database (Denmark)

Larsen, Mikkel Juul

In order to ensure high utilization of the catalyst material in a polymer electrolyte membrane fuel cell (PEMFC) it is usually fixed in the form of nanoparticles on a supporting material. The catalyst is platinum or a platinum alloy, and the commonly used support is carbon black (CB). Although...... structured carbon forms such as graphitized CBs, carbon nanotubes (CNTs), and carbon nanofibres (CNFs). This thesis concerns the investigation of an array of different materials which may prospec-tively replace the conventional materials used in the catalyst. The study comprised 13 carbon samples which...... nanotubes (GMWCNTs), and graphitized carbon nanofibre (CNF), while the Pt/C samples were platinized samples of some of the CNTs and CNFs (Pt/FWCNT, Pt/GMWCNT, and Pt/CNF, respectively) as well as two commercial Pt/CB reference catalysts. Comparative analyses have been performed in order to be able to assess...

[The latest in paediatric resuscitation recommendations].

Science.gov (United States)

López-Herce, Jesús; Rodríguez, Antonio; Carrillo, Angel; de Lucas, Nieves; Calvo, Custodio; Civantos, Eva; Suárez, Eva; Pons, Sara; Manrique, Ignacio

2017-04-01

Cardiac arrest has a high mortality in children. To improve the performance of cardiopulmonary resuscitation, it is essential to disseminate the international recommendations and the training of health professionals and the general population in resuscitation. This article summarises the 2015 European Paediatric Cardiopulmonary Resuscitation recommendations, which are based on a review of the advances in cardiopulmonary resuscitation and consensus in the science and treatment by the International Council on Resuscitation. The Spanish Paediatric Cardiopulmonary Resuscitation recommendations, developed by the Spanish Group of Paediatric and Neonatal Resuscitation, are an adaptation of the European recommendations, and will be used for training health professionals and the general population in resuscitation. This article highlights the main changes from the previous 2010 recommendations on prevention of cardiac arrest, the diagnosis of cardiac arrest, basic life support, advanced life support and post-resuscitation care, as well as reviewing the algorithms of treatment of basic life support, obstruction of the airway and advanced life support. Copyright © 2016. Publicado por Elsevier España, S.L.U.

Synthesis and characterization of titanium oxide supported silica materials

Science.gov (United States)

Schrijnemakers, Koen

2002-01-01

Titania-silica materials are interesting materials for use in catalysis, both as a catalyst support as well as a catalyst itself. Titania-silica materials combine the excellent support and photocatalytic properties of titania with the high thermal and mechanical stability of silica. Moreover, the interaction of titania with silica leads to new active sites, such as acid and redox sites, that are not found on the single oxides. In this Ph.D. two recently developed deposition methods were studied and evaluated for their use to create titanium oxide supported silica materials, the Chemical Surface Coating (CSC) and the Molecular Designed Dispersion (MDD). These methods were applied to two structurally different silica supports, an amorphous silica gel and the highly ordered MCM-48. Both methods are based on the specific interaction between a titanium source and the functional groups on the silica surface. With the CSC method high amounts of titanium can be obtained. However, clustering of the titania phase is observed in most cases. The MDD method allows much lower titanium amounts to be deposited without the formation of crystallites. Only at the highest Ti loading very small crystallites are formed after calcination. MCM-48 and silica gel are both pure SiO2 materials and therefore chemically similar to each other. However, they possess a different morphology and are synthesized in a different way. As such, some authors have reported that the MCM-48 surface would be more reactive than the surface of silica gel. In our experiments however no differences could be observed that confirmed this hypothesis. In the CSC method, the same reactions were observed and similar amounts of Ti and Cl were deposited. In the case of the MDD method, no difference in the reaction mechanism was observed. However, due to the lower thermal and hydrothermal stability of the MCM-48 structure compared to silica gel, partial incorporation of Ti atoms in the pore walls of MCM-48 took place

Recommender Systems in Commercial Use

OpenAIRE

Aldrich, Susan E.

2011-01-01

Commercial recommender systems are deployed by marketing teams to increase revenue and/or personalize user experience. Marketers evaluate recommender systems not on its algorithms but on how well the vendor‘s expertise and interfaces will support achieving business goals. Driven by a business model that pays based on recommendation success, vendors guide clients through continuous optimization of recommendations. While recommender technology is mature, the solutions and market are still young...

Perspective on safety case to support a possible site recommendation decision

International Nuclear Information System (INIS)

Gil, A.V.; Gamble, R.P.

2002-01-01

The mission of the US Department of Energy (DOE) is to provide the basis for a national decision regarding the development of a geological repository for spent nuclear fuel and high-level radioactive waste at the Yucca Mountain site in Nevada. There are a number of steps in the decision process defined by US law that must be completed prior to development of a repository at this site. The DOE's focus is currently on the first two steps in this process: characterization of the site to support a determination by the DOE on whether the site is suitable for a geologic repository and a decision by the Secretary of Energy (the Secretary) on whether to recommend to the President that the site be approved for a repository. To enhance the confidence of multiple audiences in the basis for these actions, and to provide a basis for subsequent action by the President and the US Congress, information supporting the decision process must include the elements of a safety case consistent with the statutory and regulatory framework for these decisions. The idea of a safety case is to broaden the basis for confidence by decision-makers and the public in conclusions about safety. A safety case should cite multiple lines of evidence, or reasoning, beyond the results of a safety assessment to support the demonstration of safety, which includes compliance with applicable safety criteria. The multiple lines of evidence should show the basis for confidence in safety. To be most effective, such evidence requires information not directly used in the safety assessment. (author)

International Review Team (IRT) Safety Case Recommendations for the Yucca Mountain Total System Performance Assessment (TSPA) Supporting the Site Recommendation

International Nuclear Information System (INIS)

Van Luik, Abraham E.

2004-01-01

The session started with Abe Van Luik (IGSC Chair, US-DOE-YM, USA) who presented the feedback of the international peer review of the US-DOE Yucca Mountain TSPA (Total System Performance Assessment) supporting the successful designation of the site by the Congress and the President of the U.S. In particular, he listed key implications of the IRT (International Review team) recommendations on the forthcoming US-DOE documentation of its case for safety to be submitted to the regulator, the U.S. Nuclear Regulatory Commission, mainly: - The documentation submitted to the licensing authority should address technical aspects and compliance with regulatory criteria. - That documentation should reflect sound science and good engineering practice; it should present detailed and rigorous modelling. - In addition, it should present both quantitative and qualitative arguments, make a statement on why there can be confidence in the face of uncertainty, acknowledge remaining issues and provide the strategy to resolve them. - Demonstrating understanding is as important as demonstrating compliance. - There is a need to provide a clear explanation of the case made to the regulator for more general audiences to complement the large amount of technical documents that will be produced. The US-DOE response to these recommendations for the License Application, which is under preparation, is that the recommendations will be implemented to the maximum extent possible. In subsequent discussion, with respect to the License Application, it was acknowledged that detailed guidance from the U.S. regulator was very useful, and guidance of this type would be generally useful. At the current time, the words 'safety case' are not mentioned in U.S. regulations, but if one reads both the regulation and guidance documents it becomes evident that all aspects of a safety case need to be provided in the License Application and its accompanying documents

Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

1999-03-01

To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

Recommendation System for Adaptive Learning.

Science.gov (United States)

Chen, Yunxiao; Li, Xiaoou; Liu, Jingchen; Ying, Zhiliang

2018-01-01

An adaptive learning system aims at providing instruction tailored to the current status of a learner, differing from the traditional classroom experience. The latest advances in technology make adaptive learning possible, which has the potential to provide students with high-quality learning benefit at a low cost. A key component of an adaptive learning system is a recommendation system, which recommends the next material (video lectures, practices, and so on, on different skills) to the learner, based on the psychometric assessment results and possibly other individual characteristics. An important question then follows: How should recommendations be made? To answer this question, a mathematical framework is proposed that characterizes the recommendation process as a Markov decision problem, for which decisions are made based on the current knowledge of the learner and that of the learning materials. In particular, two plain vanilla systems are introduced, for which the optimal recommendation at each stage can be obtained analytically.

Exploring the role of curriculum materials to support teachers in science education reform

Science.gov (United States)

Schneider, Rebecca M.

2001-07-01

For curriculum materials to succeed in promoting large-scale science education reform, teacher learning must be supported. Materials were designed to reflect desired reforms and to be educative by including detailed lesson descriptions that addressed necessary content, pedagogy, and pedagogical content knowledge for teachers. The goal of this research was to describe how such materials contributed to classroom practices. As part of an urban systemic reform effort, four middle school teachers' initial enactment of an inquiry-based science unit on force and motion were videotaped. Enactments focused on five lesson sequences containing experiences with phenomena, investigation, technology use, or artifact development. Each sequence spanned three to five days across the 10-week unit. For each lesson sequence, intended and actual enactment were compared using ratings of (1) accuracy and completeness of science ideas presented, (2) amount student learning opportunities, similarity of learning opportunities with those intended, and quality of adaptations , and (3) amount of instructional supports offered, appropriateness of instructional supports and source of ideas for instructional supports. Ratings indicated two teachers' enactments were consistent with intentions and two teachers' enactments were not. The first two were in school contexts supportive of the reform. They purposefully used the materials to guide enactment, which tended to be consistent with standards-based reform. They provided students opportunities to use technology tools, design investigations, and discuss ideas. However, enactment ratings were less reflective of curriculum intent when challenges were greatest, such as when teachers attempted to present challenging science ideas, respond to students' ideas, structure investigations, guide small-group discussions, or make adaptations. Moreover, enactment ratings were less consistent in parts of lessons where materials did not include lesson specific

MANAGEMENT OF DIABETES DURING AIR TRAVEL: A SYSTEMATIC LITERATURE REVIEW OF CURRENT RECOMMENDATIONS AND THEIR SUPPORTING EVIDENCE.

Science.gov (United States)

Pavela, James; Suresh, Rahul; Blue, Rebecca S; Mathers, Charles H; Belalcazar, L Maria

2018-02-01

Individuals with diabetes are increasingly seeking pretravel advice, but updated professional recommendations remain scant. We performed a systematic review on diabetes management during air travel to summarize current recommendations, assess supporting evidence, and identify areas of future research. A systematic review of the English literature on diabetes management during air travel was undertaken utilizing PubMed and MEDLINE. Publications regarding general travel advice; adjustment of insulin and noninsulin therapies; and the use of insulin pumps, glucometers and subcutaneous glucose sensors at altitude were included. Gathered information was used to create an updated summary of glucose-lowering medication adjustment during air travel. Sixty-one publications were identified, most providing expert opinion and few offering primary data (47 expert opinion, 2 observational studies, 2 case reports, 10 device studies). General travel advice was uniform, with increasing attention to preflight security. Indications for oral antihyperglycemic therapy adjustments varied. There were few recommendations on contemporary agents and on nonhypoglycemic adverse events. There was little consensus on insulin adjustment protocols, many antedating current insulin formulations. Most publications advocated adjusting insulin pump time settings after arrival; however, there was disagreement on timing and rate adjustments. Glucometers and subcutaneous glucose sensors were reported to be less accurate at altitude, but not to an extent that would preclude their clinical use. Recommendations for diabetes management during air travel vary significantly and are mostly based on expert opinion. Data from systematic investigation on glucose-lowering medication adjustment protocols may support the development of a future consensus statement. CSII = continuous subcutaneous insulin infusion (device) DPP-4 = dipeptidyl peptidase 4 EGA = error grid analysis GDH = glucose dehydrogenase GOX = glucose

Synthetic Light-Curable Polymeric Materials Provide a Supportive Niche for Dental Pulp Stem Cells.

Science.gov (United States)

Vining, Kyle H; Scherba, Jacob C; Bever, Alaina M; Alexander, Morgan R; Celiz, Adam D; Mooney, David J

2018-01-01

Dental disease annually affects billions of patients, and while regenerative dentistry aims to heal dental tissue after injury, existing polymeric restorative materials, or fillings, do not directly participate in the healing process in a bioinstructive manner. There is a need for restorative materials that can support native functions of dental pulp stem cells (DPSCs), which are capable of regenerating dentin. A polymer microarray formed from commercially available monomers to rapidly identify materials that support DPSC adhesion is used. Based on these findings, thiol-ene chemistry is employed to achieve rapid light-curing and minimize residual monomer of the lead materials. Several triacrylate bulk polymers support DPSC adhesion, proliferation, and differentiation in vitro, and exhibit stiffness and tensile strength similar to existing dental materials. Conversely, materials composed of a trimethacrylate monomer or bisphenol A glycidyl methacrylate, which is a monomer standard in dental materials, do not support stem cell adhesion and negatively impact matrix and signaling pathways. Furthermore, thiol-ene polymerized triacrylates are used as permanent filling materials at the dentin-pulp interface in direct contact with irreversibly injured pulp tissue. These novel triacrylate-based biomaterials have potential to enable novel regenerative dental therapies in the clinic by both restoring teeth and providing a supportive niche for DPSCs. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Open pneumothorax: the spectrum and outcome of management based on Advanced Trauma Life Support recommendations.

Science.gov (United States)

Kong, V Y; Liu, M; Sartorius, B; Clarke, D L

2015-08-01

The current management of open pneumothorax (OPTX) is based on Advanced Trauma Life Support (ATLS) recommendations and consists of the application of a three-way occlusive dressing, followed by intercostal chest drain insertion. Very little is known regarding the spectrum and outcome of this approach, especially in the civilian setting. We conducted a retrospective review of 58 consecutive patients with OPTX over a four-year period managed in a high volume metropolitan trauma service in South Africa. Of the 58 patients included, 95% (55/58) were male, and the mean age for all patients was 21 years. Ninety-seven percent of all injuries were inflicted by knives and the remaining 3% (2/58) of injuries were inflicted by unknown weapons. 59% of injuries were left sided. In six patients (10%) a protocol violation was present in their management. Five of the six patients (83%) in whom protocol violation occurred developed a life-threatening event (tension PTX) compared to none amongst those where the protocol was followed (p < 0.001). There was no mortality as a direct result of management of OPTX following ATLS recommendations. ATLS recommendations for OPTX are safe and effective. Any deviation from this standard practice is associated with avoidable morbidity and potential mortality.

REVIEW OF EQUIPMENT USED IN RUSSIAN PRACTICE FOR ACCOUNTING MEASUREMENTS OF NUCLEAR MATERIALS

International Nuclear Information System (INIS)

NEYMOTIN, L.

1999-01-01

The objective of this work was to analyze instrumentation and methodologies used at Russian nuclear facilities for measurement of item nuclear materials, materials in bulk form, and waste streams; specify possibilities for the application of accounting measurements; and develop recommendations for improvement. The major steps and results: Representative conversion, enrichment (gas centrifuge), fuel fabrication, spent fuel reprocessing, and chemical-metallurgical production facilities in Russia were selected; Full lists of nuclear materials were prepared; Information about measurement methods and instrumentation for each type of nuclear material were gathered; and Recommendations on methodological and instrumentation support of accounting measurements for all types of materials were formulated. The analysis showed that the existing measurement methods and instrumentation serve mostly to support the technological process control and nuclear and radiation safety control. Requirements for these applications are lower than requirements for MC and A applications. To improve the state of MC and A at Russian nuclear facilities, significant changes in instrumentation support will be required, specifically in weighing equipment, volume measurements, and destructive and non-destructive analysis equipment, along with certified reference materials

3D printing PLA and silicone elastomer structures with sugar solution support material

Science.gov (United States)

Hamidi, Armita; Jain, Shrenik; Tadesse, Yonas

2017-04-01

3D printing technology has been used for rapid prototyping since 1980's and is still developing in a way that can be used for customized products with complex design and miniature features. Among all the available 3D printing techniques, Fused Deposition Modeling (FDM) is one of the most widely used technologies because of its capability to build different structures by employing various materials. However, complexity of parts made by FDM is greatly limited by restriction of using support materials. Support materials are often used in FDM for several complex geometries such as fully suspended shapes, overhanging surfaces and hollow features. This paper describes an approach to 3D print a structure using silicone elastomer and polylactide fiber (PLA) by employing a novel support material that is soluble in water. This support material is melted sugar which can easily be prepared at a low cost. Sugar is a carbohydrate, which is found naturally in plants such as sugarcane and sugar beets; therefore, it is completely organic and eco-friendly. As another advantage, the time for removing this material from the part is considerably less than other commercially available support materials and it can be removed easily by warm water without leaving any trace. Experiments were done using an inexpensive desktop 3D printer to fabricate complex structures for use in soft robots. The results envision that further development of this system would contribute to a method of fabrication of complex parts with lower cost yet high quality.

Radiation Oncology and Online Patient Education Materials: Deviating From NIH and AMA Recommendations

International Nuclear Information System (INIS)

Prabhu, Arpan V.; Hansberry, David R.; Agarwal, Nitin; Clump, David A.; Heron, Dwight E.

2016-01-01

Purpose: Physicians encourage patients to be informed about their health care options, but much of the online health care–related resources can be beneficial only if patients are capable of comprehending it. This study's aim was to assess the readability level of online patient education resources for radiation oncology to conclude whether they meet the general public's health literacy needs as determined by the guidelines of the United States National Institutes of Health (NIH) and the American Medical Association (AMA). Methods: Radiation oncology–related internet-based patient education materials were downloaded from 5 major professional websites (American Society for Radiation Oncology, American Association of Physicists in Medicine, American Brachytherapy Society, (RadiologyInfo.org), and Radiation Therapy Oncology Group). Additional patient education documents were downloaded by searching for key radiation oncology phrases using Google. A total of 135 articles were downloaded and assessed for their readability level using 10 quantitative readability scales that are widely accepted in the medical literature. Results: When all 10 assessment tools for readability were taken into account, the 135 online patient education articles were written at an average grade level of 13.7 ± 2.0. One hundred nine of the 135 articles (80.7%) required a high school graduate's comprehension level (12th-grade level or higher). Only 1 of the 135 articles (0.74%) met the AMA and NIH recommendations for patient education resources to be written between the third-grade and seventh-grade levels. Conclusion: Radiation oncology websites have patient education material written at an educational level above the NIH and AMA recommendations; as a result, average American patients may not be able to fully understand them. Rewriting radiation oncology patient education resources would likely contribute to the patients' understanding of their health and treatment options, making each

Radiation Oncology and Online Patient Education Materials: Deviating From NIH and AMA Recommendations

Energy Technology Data Exchange (ETDEWEB)

Prabhu, Arpan V. [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Hansberry, David R. [Department of Radiology, Thomas Jefferson University Hospitals, Philadelphia, Pennsylvania (United States); Agarwal, Nitin [Department of Neurological Surgery, University of Pittsburgh Medical Center, Pittsburgh, Pennsylvania (United States); Clump, David A. [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Heron, Dwight E., E-mail: herond2@upmc.edu [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Department of Otolaryngology, Head and Neck Surgery, University of Pittsburgh Medical Center, Pittsburgh, Pennsylvania (United States)

2016-11-01

Purpose: Physicians encourage patients to be informed about their health care options, but much of the online health care–related resources can be beneficial only if patients are capable of comprehending it. This study's aim was to assess the readability level of online patient education resources for radiation oncology to conclude whether they meet the general public's health literacy needs as determined by the guidelines of the United States National Institutes of Health (NIH) and the American Medical Association (AMA). Methods: Radiation oncology–related internet-based patient education materials were downloaded from 5 major professional websites (American Society for Radiation Oncology, American Association of Physicists in Medicine, American Brachytherapy Society, (RadiologyInfo.org), and Radiation Therapy Oncology Group). Additional patient education documents were downloaded by searching for key radiation oncology phrases using Google. A total of 135 articles were downloaded and assessed for their readability level using 10 quantitative readability scales that are widely accepted in the medical literature. Results: When all 10 assessment tools for readability were taken into account, the 135 online patient education articles were written at an average grade level of 13.7 ± 2.0. One hundred nine of the 135 articles (80.7%) required a high school graduate's comprehension level (12th-grade level or higher). Only 1 of the 135 articles (0.74%) met the AMA and NIH recommendations for patient education resources to be written between the third-grade and seventh-grade levels. Conclusion: Radiation oncology websites have patient education material written at an educational level above the NIH and AMA recommendations; as a result, average American patients may not be able to fully understand them. Rewriting radiation oncology patient education resources would likely contribute to the patients' understanding of their health and treatment

Radiation Oncology and Online Patient Education Materials: Deviating From NIH and AMA Recommendations.

Science.gov (United States)

Prabhu, Arpan V; Hansberry, David R; Agarwal, Nitin; Clump, David A; Heron, Dwight E

2016-11-01

Physicians encourage patients to be informed about their health care options, but much of the online health care-related resources can be beneficial only if patients are capable of comprehending it. This study's aim was to assess the readability level of online patient education resources for radiation oncology to conclude whether they meet the general public's health literacy needs as determined by the guidelines of the United States National Institutes of Health (NIH) and the American Medical Association (AMA). Radiation oncology-related internet-based patient education materials were downloaded from 5 major professional websites (American Society for Radiation Oncology, American Association of Physicists in Medicine, American Brachytherapy Society, RadiologyInfo.org, and Radiation Therapy Oncology Group). Additional patient education documents were downloaded by searching for key radiation oncology phrases using Google. A total of 135 articles were downloaded and assessed for their readability level using 10 quantitative readability scales that are widely accepted in the medical literature. When all 10 assessment tools for readability were taken into account, the 135 online patient education articles were written at an average grade level of 13.7 ± 2.0. One hundred nine of the 135 articles (80.7%) required a high school graduate's comprehension level (12th-grade level or higher). Only 1 of the 135 articles (0.74%) met the AMA and NIH recommendations for patient education resources to be written between the third-grade and seventh-grade levels. Radiation oncology websites have patient education material written at an educational level above the NIH and AMA recommendations; as a result, average American patients may not be able to fully understand them. Rewriting radiation oncology patient education resources would likely contribute to the patients' understanding of their health and treatment options, making each physician-patient interaction more productive

Heavy oils processing materials requirements crude processing

Energy Technology Data Exchange (ETDEWEB)

Sloley, Andrew W. [CH2M Hill, Englewood, CO (United States)

2012-07-01

Over time, recommended best practices for crude unit materials selection have evolved to accommodate new operating requirements, feed qualities, and product qualities. The shift to heavier oil processing is one of the major changes in crude feed quality occurring over the last 20 years. The three major types of crude unit corrosion include sulfidation attack, naphthenic acid attack, and corrosion resulting from hydrolyzable chlorides. Heavy oils processing makes all three areas worse. Heavy oils have higher sulfur content; higher naphthenic acid content; and are more difficult to desalt, leading to higher chloride corrosion rates. Materials selection involves two major criteria, meeting required safety standards, and optimizing economics of the overall plant. Proper materials selection is only one component of a plant integrity approach. Materials selection cannot eliminate all corrosion. Proper materials selection requires appropriate support from other elements of an integrity protection program. The elements of integrity preservation include: materials selection (type and corrosion allowance); management limits on operating conditions allowed; feed quality control; chemical additives for corrosion reduction; and preventive maintenance and inspection (PMI). The following discussion must be taken in the context of the application of required supporting work in all the other areas. Within that context, specific materials recommendations are made to minimize corrosion due to the most common causes in the crude unit. (author)

Record Recommendations for the CERN Document Server

CERN Document Server

AUTHOR|(CDS)2096025; Marian, Ludmila

CERN Document Server (CDS) is the institutional repository of the European Organization for Nuclear Research (CERN). It hosts all the research material produced at CERN, as well as multi- media and administrative documents. It currently has more than 1.5 million records grouped in more than 1000 collections. It’s underlying platform is Invenio, an open source digital library system created at CERN. As the size of CDS increases, discovering useful and interesting records becomes more challenging. Therefore, the goal of this work is to create a system that supports the user in the discovery of related interesting records. To achieve this, a set of recommended records are displayed on the record page. These recommended records are based on the analyzed behavior (page views and downloads) of other users. This work will describe the methods and algorithms used for creating, implementing, and the integration with the underlying software platform, Invenio. A very important decision factor when designing a recomme...

Supporting Multi-Agent Reputation Calculation in the Wikipedia Recommender System

DEFF Research Database (Denmark)

Jensen, Christian D.

2010-01-01

editorial policy that allows anybody, to create or modify articles. This has resulted in a broad and detailed coverage of subjects, but it has also caused problems relating to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help human users determine the credibility...... articles that they have read. This makes the WRS a rating-based collaborative filtering system, which implements trust metrics to determine the weight of feedback from different recommenders. In this paper the authors describe the WRS outlining some of the requirements and constraints that shaped...... of an article based on feedback from other Wikipedia users. The WRS calculates a personalised rating for any Wikipedia article based on feedback (recommendations) provided by other Wikipedia users. As part of this process, WRS users are expected to provide their own feedback about the quality of Wikipedia...

Spreadsheet Decision Support Model for Training Exercise Material Requirements Planning

National Research Council Canada - National Science Library

Tringali, Arthur

1997-01-01

This thesis focuses on developing a spreadsheet decision support model that can be used by combat engineer platoon and company commanders in determining the material requirements and estimated costs...

Recommendation Sets and Choice Queries

DEFF Research Database (Denmark)

Viappiani, Paolo Renato; Boutilier, Craig

2011-01-01

Utility elicitation is an important component of many applications, such as decision support systems and recommender systems. Such systems query users about their preferences and offer recommendations based on the system's belief about the user's utility function. We analyze the connection between...... the problem of generating optimal recommendation sets and the problem of generating optimal choice queries, considering both Bayesian and regret-based elicitation. Our results show that, somewhat surprisingly, under very general circumstances, the optimal recommendation set coincides with the optimal query....

Decision-Guided Recommenders with Composite Alternatives

Science.gov (United States)

Alodhaibi, Khalid

2011-01-01

Recommender systems aim to support users in their decision-making process while interacting with large information spaces and recommend items of interest to users based on preferences they have expressed, either explicitly or implicitly. Recommender systems are increasingly used with product and service selection over the Internet. Although…

Support to the physical protection and accountancy for nuclear materials in Kazakstan

International Nuclear Information System (INIS)

Hashimoto, Yu.; Yoshida, M.; Akutsu, M.; Takeda, H.

1998-01-01

The support programs for Republic of Kazakstan have been carried out for the purpose of establishing the State System of Accounting for and Control of Nuclear Material (SSAC). These support are based on the cooperation agreement for the elimination of nuclear weapons, that reached mutual agreement between both government of Japan and the Republic of Kazakstan in March, 1994, 1994. Japan, Sweden, the United Kingdom and the United States of America have conducted the support for Kazakstan. Since there are many facilities to be supported such as fast reactors, fuel fabrication facilities and research facilities, items to be supported are coordinated and shared among the supporting countries. Japan has been carrying out the supporting tasks mainly for the fast breeder reactor facility, BN-350 and Atomic Energy Agency of Kazakstan (KAEA). PESCO Co., Ltd. is entrusted this supporting work from Technical Secretariat on Cooperation for the Elimination of Nuclear Weapons Reduced in the Former Soviet Union, and has conducted the support in the area of flow monitoring system, nuclear material accounting and control and physical protection, obtaining technical cooperation from Power Reactor and Nuclear Development Corporation (PNC)

Report of the Material Control and Material Accounting Task Force: the role of material control and material accounting in the safeguards program

International Nuclear Information System (INIS)

1978-03-01

Results are presented of NRC Task Force investigations to identify the functions of a safeguards program in relation to the NRC safeguards objective, define the role and objectives of material control and material accounting systems within that program, develop goals for material control and material accounting based on those roles and objectives, assess current material control and material accounting requirements and performance levels in the light of the goals, and recommend future actions needed to attain the proposed goals. It was found that the major contribution of material accounting to the safeguards program is in support of the assurance function. It also can make secondary contributions to the prevention and response functions. In the important area of loss detection, a response measure, it is felt that limitations inherent in material accounting for some fuel cycle operations limit its ability to operate as a primary detection system to detect a five formula kilogram loss with high assurance (defined by the Task Force as a probability of detection of 90 percent or more) and that, in those cases, material accounting can act only in a backup role. Physical security and material control must make the primary contributions to the prevention and detection of theft, so that safeguards do not rely primarily for detection capabilities on material accounting. There are several areas of accounting that require more emphasis than is offered by the current regulatory base. These areas include: timely shipper-receiver difference analysis and reconciliation; a demand physical inventory capability; improved loss localization;discard measurement verification; timely recovery of scrap; improved measurement and record systems; and limits on cumulative inventory differences and shipper-receiver differences. An increased NRC capability for monitoring and analyzing licensee accounting data and more timely and detailed submittals of data to NRC by licensees are recommended

WIPP shaft seal system parameters recommended to support compliance calculations

International Nuclear Information System (INIS)

Hurtado, L.D.; Knowles, M.K.; Kelley, V.A.; Jones, T.L.; Ogintz, J.B.; Pfeifle, T.W.

1997-12-01

The US Department of Energy plans to dispose of transuranic waste at the Waste Isolation Pilot Plant (WIPP), which is sited in southeastern New Mexico. The WIPP disposal facility is located approximately 2,150 feet (650 m) below surface in the bedded halite of the Salado Formation. Prior to initiation of disposal activities, the Department of Energy must demonstrate that the WIPP will comply with all regulatory requirements. Applicable regulations require that contaminant releases from the WIPP remain below specified levels for a period of 10,000 years. To demonstrate that the WIPP will comply with these regulations, the Department of Energy has requested that Sandia National Laboratories develop and implement a comprehensive performance assessment of the WIPP repository for the regulatory period. This document presents the conceptual model of the shaft sealing system to be implemented in performance assessment calculations conducted in support of the Compliance Certification Application for the WIPP. The model was developed for use in repository-scale calculations and includes the seal system geometry and materials to be used in grid development as well as all parameters needed to describe the seal materials. These calculations predict the hydrologic behavior of the system. Hence conceptual model development is limited to those processes that could impact the fluid flow through the seal system

WIPP shaft seal system parameters recommended to support compliance calculations

Energy Technology Data Exchange (ETDEWEB)

Hurtado, L.D.; Knowles, M.K. [Sandia National Labs., Albuquerque, NM (United States); Kelley, V.A.; Jones, T.L.; Ogintz, J.B. [INTERA Inc., Austin, TX (United States); Pfeifle, T.W. [RE/SPEC, Inc., Rapid City, SD (United States)

1997-12-01

The US Department of Energy plans to dispose of transuranic waste at the Waste Isolation Pilot Plant (WIPP), which is sited in southeastern New Mexico. The WIPP disposal facility is located approximately 2,150 feet (650 m) below surface in the bedded halite of the Salado Formation. Prior to initiation of disposal activities, the Department of Energy must demonstrate that the WIPP will comply with all regulatory requirements. Applicable regulations require that contaminant releases from the WIPP remain below specified levels for a period of 10,000 years. To demonstrate that the WIPP will comply with these regulations, the Department of Energy has requested that Sandia National Laboratories develop and implement a comprehensive performance assessment of the WIPP repository for the regulatory period. This document presents the conceptual model of the shaft sealing system to be implemented in performance assessment calculations conducted in support of the Compliance Certification Application for the WIPP. The model was developed for use in repository-scale calculations and includes the seal system geometry and materials to be used in grid development as well as all parameters needed to describe the seal materials. These calculations predict the hydrologic behavior of the system. Hence conceptual model development is limited to those processes that could impact the fluid flow through the seal system.

EVALUATION OF TRAINING AND‐METHODOLOGICAL SUPPORT OF UNIVERSITY COURSES (in Russian

Directory of Open Access Journals (Sweden)

Natalia BELKINA

2012-04-01

Full Text Available Quality of teaching at a Higher Education Institution certainly depends on the integrity and quality of its training and methodological support. However, in order to improve this quality it is necessary to have a sound methodology for evaluation of such support. This article contains a list of recommended university teaching course materials, criteria of their separate components evaluation and an approach to calculating the quality levels of separate components and teaching course materials as a whole.

Computer system for International Reactor Pressure Vessel Materials Database support

International Nuclear Information System (INIS)

Arutyunjan, R.; Kabalevsky, S.; Kiselev, V.; Serov, A.

1997-01-01

This report presents description of the computer tools for support of International Reactor Pressure Vessel Materials Database developed at IAEA. Work was focused on raw, qualified, processed materials data, search, retrieval, analysis, presentation and export possibilities of data. Developed software has the following main functions: provides software tools for querying and search of any type of data in the database; provides the capability to update the existing information in the database; provides the capability to present and print selected data; provides the possibility of export on yearly basis the run-time IRPVMDB with raw, qualified and processed materials data to Database members; provides the capability to export any selected sets of raw, qualified, processed materials data

31 CFR 594.317 - Financial, material, or technological support.

Science.gov (United States)

2010-07-01

..., material, or technological support, as used in § 594.201(a)(4)(i) of this part, means any property, tangible or intangible, including but not limited to currency, financial instruments, securities, or any... transportation; or goods. “Technologies” as used in this definition means specific information necessary for the...

Using recommender systems to support idea generation stage | El ...

African Journals Online (AJOL)

Journal of Fundamental and Applied Sciences ... Then, we analyze and discuss based on a set of defined characteristics the use of recommendation ... which seems the most suitable to meet our qualitative approach in this specific context.

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

Energy Technology Data Exchange (ETDEWEB)

Liby, Alan L [ORNL; Rogers, Hiram [ORNL

2013-10-01

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.

A Personalized Electronic Movie Recommendation System Based on Support Vector Machine and Improved Particle Swarm Optimization.

Science.gov (United States)

Wang, Xibin; Luo, Fengji; Qian, Ying; Ranzi, Gianluca

2016-01-01

With the rapid development of ICT and Web technologies, a large an amount of information is becoming available and this is producing, in some instances, a condition of information overload. Under these conditions, it is difficult for a person to locate and access useful information for making decisions. To address this problem, there are information filtering systems, such as the personalized recommendation system (PRS) considered in this paper, that assist a person in identifying possible products or services of interest based on his/her preferences. Among available approaches, collaborative Filtering (CF) is one of the most widely used recommendation techniques. However, CF has some limitations, e.g., the relatively simple similarity calculation, cold start problem, etc. In this context, this paper presents a new regression model based on the support vector machine (SVM) classification and an improved PSO (IPSO) for the development of an electronic movie PRS. In its implementation, a SVM classification model is first established to obtain a preliminary movie recommendation list based on which a SVM regression model is applied to predict movies' ratings. The proposed PRS not only considers the movie's content information but also integrates the users' demographic and behavioral information to better capture the users' interests and preferences. The efficiency of the proposed method is verified by a series of experiments based on the MovieLens benchmark data set.

Establishing a National Nuclear Security Support Centre

International Nuclear Information System (INIS)

2014-02-01

: Combating Illicit Trafficking in Nuclear and Other Radioactive Material, IAEA Nuclear Security Series No. 6; Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5), IAEA Nuclear Security Series No. 13; Nuclear Security Recommendations on Radioactive Material and Associated Facilities, IAEA Nuclear Security Series No. 14; Nuclear Security Recommendations on Nuclear and Other Radioactive Material out of Regulatory Control, IAEA Nuclear Security Series No. 15. This publication is been based on material presented during meetings and workshops that focused on State requests to establish NSSCs and the International Network for Nuclear Security Training and Support Centres

Recommendations to support nurses and improve the delivery of oncology and palliative care in India

Directory of Open Access Journals (Sweden)

Virginia T LeBaron

2017-01-01

Full Text Available Context: Nurses in India often practice in resource-constrained settings and care for cancer patients with high symptom burden yet receive little oncology or palliative care training. Aim: The aim of this study is to explore challenges encountered by nurses in India and offer recommendations to improve the delivery of oncology and palliative care. Methods: Qualitative ethnography. Setting: The study was conducted at a government cancer hospital in urban South India. Sample: Thirty-seven oncology/palliative care nurses and 22 others (physicians, social workers, pharmacists, patients/family members who interact closely with nurses were included in the study. Data Collection: Data were collected over 9 months (September 2011– June 2012. Key data sources included over 400 hours of participant observation and 54 audio-recorded semi-structured interviews. Analysis: Systematic qualitative analysis of field notes and interview transcripts identified key themes and patterns. Results: Key concerns of nurses included safety related to chemotherapy administration, workload and clerical responsibilities, patients who died on the wards, monitoring family attendants, and lack of supplies. Many participants verbalized distress that they received no formal oncology training. Conclusions: Recommendations to support nurses in India include: prioritize safety, optimize role of the nurse and explore innovative models of care delivery, empower staff nurses, strengthen nurse leadership, offer relevant educational programs, enhance teamwork, improve cancer pain management, and engage in research and quality improvement projects. Strong institutional commitment and leadership are required to implement interventions to support nurses. Successful interventions must account for existing cultural and professional norms and first address safety needs of nurses. Positive aspects from existing models of care delivery can be adapted and integrated into general nursing

Newborn screening for proximal urea cycle disorders: Current evidence supporting recommendations for newborn screening.

Science.gov (United States)

Merritt, J Lawrence; Brody, Linnea L; Pino, Gisele; Rinaldo, Piero

2018-04-20

Current newborn screening (NBS) for urea cycle disorders (UCD) is incomplete as only distal UCDs are included in most NBS programs by measuring elevated amino acid concentrations. NBS for the proximal UCDs involves the detection in NBS spots of low citrulline values, a finding which is often overlooked because it is considered to be inadequate. We retrospectively analyzed NBS blood spots from known UCD patients comparing the utility of the Region 4 Stork (R4S) interpretive tools to conventional cutoff based interpretation. This study shows the utility of R4S tools in detecting all UCDs, and provides evidence to support the nomination to add proximal UCDs to the recommended uniform screening panel. Copyright © 2018 Elsevier Inc. All rights reserved.

A Flexible Electronic Commerce Recommendation System

Science.gov (United States)

Gong, Songjie

Recommendation systems have become very popular in E-commerce websites. Many of the largest commerce websites are already using recommender technologies to help their customers find products to purchase. An electronic commerce recommendation system learns from a customer and recommends products that the customer will find most valuable from among the available products. But most recommendation methods are hard-wired into the system and they support only fixed recommendations. This paper presented a framework of flexible electronic commerce recommendation system. The framework is composed by user model interface, recommendation engine, recommendation strategy model, recommendation technology group, user interest model and database interface. In the recommender strategy model, the method can be collaborative filtering, content-based filtering, mining associate rules method, knowledge-based filtering method or the mixed method. The system mapped the implementation and demand through strategy model, and the whole system would be design as standard parts to adapt to the change of the recommendation strategy.

Supporting recommendations to policies for expanding the building of nuclear stations

International Nuclear Information System (INIS)

Nasr, Nahla

2009-01-01

This article speaks about the policy recommendations concerning the future of nuclear energy. It includes the findings and recommendations based upon the presentations and discussions at the meeting of nearly 40 scientists, policy makers, industry representatives, and non governmental experts from around the world. The Bulletin of the Atomic Scientists convened them. The meeting was cosponsored by the University of Chicago, Argonne National Laboratory, and the Chicago Council on Science and Technology

Dynamic Use of Digital Library Material - Supporting Users with Typed Links in Open Hypermedia

DEFF Research Database (Denmark)

Grønbæk, Kaj; Hansen, Klaus Marius; Yndigegn, Christian

1999-01-01

This paper introduces a novel approach to supporting digital library users in organising and annotating material. We have extended the concept of open hypermedia by introducing typed links, which support: addition of (user-defined) semantics to hypertexts, user navigation, and machine supported...... analysis and synthesis of hypermedia structures. The Webvise open hypermedia system is integrated with the World Wide Web, and has been augmented with a type system. We illustrate the potential use in the context of digital libraries with a scenario of teachers jointly preparing a course based on digital...... library material....

Recommending Multidimensional Queries

Science.gov (United States)

Giacometti, Arnaud; Marcel, Patrick; Negre, Elsa

Interactive analysis of datacube, in which a user navigates a cube by launching a sequence of queries is often tedious since the user may have no idea of what the forthcoming query should be in his current analysis. To better support this process we propose in this paper to apply a Collaborative Work approach that leverages former explorations of the cube to recommend OLAP queries. The system that we have developed adapts Approximate String Matching, a technique popular in Information Retrieval, to match the current analysis with the former explorations and help suggesting a query to the user. Our approach has been implemented with the open source Mondrian OLAP server to recommend MDX queries and we have carried out some preliminary experiments that show its efficiency for generating effective query recommendations.

Compositional descriptor-based recommender system for the materials discovery

Science.gov (United States)

Seko, Atsuto; Hayashi, Hiroyuki; Tanaka, Isao

2018-06-01

Structures and properties of many inorganic compounds have been collected historically. However, it only covers a very small portion of possible inorganic crystals, which implies the presence of numerous currently unknown compounds. A powerful machine-learning strategy is mandatory to discover new inorganic compounds from all chemical combinations. Herein we propose a descriptor-based recommender-system approach to estimate the relevance of chemical compositions where crystals can be formed [i.e., chemically relevant compositions (CRCs)]. In addition to data-driven compositional similarity used in the literature, the use of compositional descriptors as a prior knowledge is helpful for the discovery of new compounds. We validate our recommender systems in two ways. First, one database is used to construct a model, while another is used for the validation. Second, we estimate the phase stability for compounds at expected CRCs using density functional theory calculations.

Recommendations for actions concerning supporting ITS developments for VRUs

NARCIS (Netherlands)

Mans, D.; Giannelos, I.; Breemen, R. van; Rood, M.; Silla, A.; Rämä, P.; Scholliers, J.; Perez, O.M.; Malone, K.

2017-01-01

Introduction: This paper presents some of the work conducted in FP7 VRUITS project to draw a set of general recommendations for actions at the EU level aiming to enhance the deployment of ITS systems directed to improve the safety, mobility and comfort of vulnerable road users. Method: The work

Carbon nanocages: a new support material for Pt catalyst with remarkably high durability.

Science.gov (United States)

Wang, Xiao Xia; Tan, Zhe Hua; Zeng, Min; Wang, Jian Nong

2014-03-24

Low durability is the major challenge hindering the large-scale implementation of proton exchange membrane fuel cell (PEMFC) technology, and corrosion of carbon support materials of current catalysts is the main cause. Here, we describe the finding of remarkably high durability with the use of a novel support material. This material is based on hollow carbon nanocages developed with a high degree of graphitization and concurrent nitrogen doping for oxidation resistance enhancement, uniform deposition of fine Pt particles, and strong Pt-support interaction. Accelerated degradation testing shows that such designed catalyst possesses a superior electrochemical activity and long-term stability for both hydrogen oxidation and oxygen reduction relative to industry benchmarks of current catalysts. Further testing under conditions of practical fuel cell operation reveals almost no degradation over long-term cycling. Such a catalyst of high activity, particularly, high durability, opens the door for the next-generation PEMFC for "real world" application.

Fires involving radioactive materials : transference model; operative recommendations

International Nuclear Information System (INIS)

Rodriguez, C.E.; Puntarulo, L.J.; Canibano, J.A.

1988-01-01

In all aspects related to the nuclear activity, the occurrence of an explosion, fire or burst type accident, with or without victims, is directly related to the characteristics of the site. The present work analyses the different parameters involved, describing a transference model and recommendations for evaluation and control of the radiological risk for firemen. Special emphasis is placed on the measurement of the variables existing in this kind of operations

Development of a British Road Safety Education Support Materials Curriculum.

Science.gov (United States)

Bouck, Linda H.

Road safety education needs to be a vital component in the school curriculum. This paper describes a planned road safety education support materials curriculum developed to aid educators in the Wiltshire County (England) primary schools. Teaching strategies include topic webs, lecture, class discussion, group activities, and investigative learning…

A comparative evaluation of four restorative materials to support undermined occlusal enamel of permanent teeth

Directory of Open Access Journals (Sweden)

Prabhakar A

2006-09-01

Full Text Available The purpose of this study was to test the support to undermined occlusal enamel provided by posterior restorative composite (FiltekTM P60, 3M Dental products USA, polyacid modified resin composite (F2000 compomer, 3M Dental products, USA., radiopaque silver alloy-glass ionomer cement (Miracle Mix. GC Corp, Tokyo, Japan and Glass Ionomer cement (Fuji IX GP. To test each material, 20 human permanent mandibular third molars were selected. The lingual cusps were removed and the dentin supporting the facial cusps was cut away, leaving a shell of enamel. Each group of prepared teeth was restored using the materials according to the manufacturer′s instructions. All the specimens were thermocycled (250 cycles, 6°C- 60°C, dwell time 30 seconds and then mounted on an acrylic base. Specimens were loaded evenly across the cusp tips at a crosshead speed of 5 mm /minute in Hounsfield universal testing machine until fracture occurred. Data obtained was analyzed using analysis of variance and Studentized- Newman- Keul′s range test. No significant differences were detected in the support provided by P-60, F 2000, Miracle Mix or Fuji IX GP groups. The support provided to undermined occlusal enamel by these materials was intermediate between no support and that provided by sound dentin. Without further development in dental material technology and evidence of its efficacy, restorative materials should not be relied upon to support undermined occlusal enamel to a level comparable to that provided by sound dentin.

Nanostructured Carbon Materials as Supports in the Preparation of Direct Methanol Fuel Cell Electrocatalysts

Directory of Open Access Journals (Sweden)

María Jesús Lázaro

2013-08-01

Full Text Available Different advanced nanostructured carbon materials, such as carbon nanocoils, carbon nanofibers, graphitized ordered mesoporous carbons and carbon xerogels, presenting interesting features such as high electrical conductivity and extensively developed porous structure were synthesized and used as supports in the preparation of electrocatalysts for direct methanol fuel cells (DMFCs. The main advantage of these supports is that their physical properties and surface chemistry can be tailored to adapt the carbonaceous material to the catalytic requirements. Moreover, all of them present a highly mesoporous structure, diminishing diffusion problems, and both graphitic character and surface area can be conveniently modified. In the present work, the influence of the particular features of each material on the catalytic activity and stability was analyzed. Results have been compared with those obtained for commercial catalysts supported on Vulcan XC-72R, Pt/C and PtRu/C (ETEK. Both a highly ordered graphitic and mesopore-enriched structure of these advanced nanostructured materials resulted in an improved electrochemical performance in comparison to the commercial catalysts assayed, both towards CO and alcohol oxidation.

National Academy of Sciences Recommends Continued Support of ALMA Project

Science.gov (United States)

2000-05-01

A distinguished panel of scientists today announced their support for the continued funding of the Atacama Large Millimeter Array (ALMA) Project at a press conference given by the National Academy of Sciences. The ALMA Project is an international partnership between U.S. and European astronomy organizations to build a complete imaging telescope that will produce astronomical images at millimeter and submillimeter wavelengths. The U.S. partner is the National Science Foundation, through Associated Universities, Inc., (AUI), led by Dr. Riccardo Giacconi, and the National Radio Astronomy Observatory (NRAO). "We are delighted at this show of continued support from our peers in the scientific community," said Dr. Robert Brown, ALMA U.S. Project Director and Deputy Director of NRAO. "The endorsement adds momentum to the recent strides we've made toward the building of this important telescope." In 1998, the National Research Council, the working arm of the National Academy of Sciences, charged the Astronomy and Astrophysics Survey Committee to "survey the field of space- and ground-based astronomy and astrophysics" and to "recommend priorities for the most important new initiatives of the decade 2000-2010." In a report released today, the committee wrote that it "re-affirms the recommendations of the 1991 Astronomy and Astrophysics Survey Committee by endorsing the completion of . . . the Millimeter Array (MMA, now part of the Atacama Large Millimeter Array)." In the 1991 report "The Decade of Discovery," a previous committee chose the Millimeter Array as one of the most important projects of the decade 1990-2000. Early last year, the National Science Foundation signed a Memorandum of Understanding with a consortium of European organizations that effectively merged the MMA Project with the European Large Southern Array project. The combined project was christened the Atacama Large Millimeter Array. ALMA, expected to consist of 64 antennas with 12-meter diameter dishes

Material Not Categorized As Waste (MNCAW) data report. Radioactive Waste Technical Support Program

Energy Technology Data Exchange (ETDEWEB)

Casey, C.; Heath, B.A.

1992-11-01

The Department of Energy (DOE), Headquarters, requested all DOE sites storing valuable materials to complete a questionnaire about each material that, if discarded, could be liable to regulation. The Radioactive Waste Technical Support Program entered completed questionnaires into a database and analyzed them for quantities and type of materials stored. This report discusses the data that TSP gathered. The report also discusses problems revealed by the questionnaires and future uses of the data. Appendices contain selected data about material reported.

DNFSB Recommendation 94-1 Hanford Site Integrated Stabilization Management Plan. Volume 2

International Nuclear Information System (INIS)

Gerber, E.W.

1995-10-01

The Hanford Site Integrated Stabilization Management Plan (SISMP) was developed in support of the US Department of Energy's (DOE) Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-1 Integrated Program Plan (IPP). Volume 1 of the SISMP identifies the technical scope and costs associated with Hanford Site plans to resolve concerns identified in DNFSB Recommendation 94-1. Volume 2 of the SISMP provides the Resource Loaded Integrated Schedules for Spent Nuclear Fuel Project and Plutonium Finishing Plant activities identified in Volume 1 of the SISMP. Appendix A provides the schedules and progress curves related to spent nuclear fuel management. Appendix B provides the schedules and progress curves related to plutonium-bearing material management. Appendix C provides programmatic logic diagrams that were referenced in Volume 1 of the SISMP

Carbon Nitride Materials as Efficient Catalyst Supports for Proton Exchange Membrane Water Electrolyzers

Directory of Open Access Journals (Sweden)

Ana Belen Jorge

2018-06-01

Full Text Available Carbon nitride materials with graphitic to polymeric structures (gCNH were investigated as catalyst supports for the proton exchange membrane (PEM water electrolyzers using IrO2 nanoparticles as oxygen evolution electrocatalyst. Here, the performance of IrO2 nanoparticles formed and deposited in situ onto carbon nitride support for PEM water electrolysis was explored based on previous preliminary studies conducted in related systems. The results revealed that this preparation route catalyzed the decomposition of the carbon nitride to form a material with much lower N content. This resulted in a significant enhancement of the performance of the gCNH-IrO2 (or N-doped C-IrO2 electrocatalyst that was likely attributed to higher electrical conductivity of the N-doped carbon support.

Further HTGR core support structure reliability studies. Interim report No. 1

International Nuclear Information System (INIS)

Platus, D.L.

1976-01-01

Results of a continuing effort to investigate high temperature gas cooled reactor (HTGR) core support structure reliability are described. Graphite material and core support structure component physical, mechanical and strength properties required for the reliability analysis are identified. Also described are experimental and associated analytical techniques for determining the required properties, a procedure for determining number of tests required, properties that might be monitored by special surveillance of the core support structure to improve reliability predictions, and recommendations for further studies. Emphasis in the study is directed towards developing a basic understanding of graphite failure and strength degradation mechanisms; and validating analytical methods for predicting strength and strength degradation from basic material properties

Studies on the core-support carbon material for VHTR, (1)

International Nuclear Information System (INIS)

Matsuo, Hideto; Saito, Tamotsu; Fukuda, Yasumasa; Sasaki, Yasuichi; Hasegawa, Takashi.

1979-11-01

To obtain information of core-support carbon material for VHTR, thermal conductivity and electrical resistivity of three domestic carbon blocks were measured. Results indicated the need for development of carbon material with lower thermal conductivity for VHTR. These two were also measured of the samples heat-treated between 1000 0 C and 3040 0 C for one hour. Thermal conductivity increased with heat-treatment above 1200 0 C and resistivity stayed constant between 1500 0 C and 2000 0 C. The results should be useful in choosing the final heat-treatment temperature in carbon material production. The changes of Lorentz number with heat treatment were classified into three heat-treatment temperature regions of below 1500 0 C, 1500 0 C - 2500 0 C, and above 2500 0 C; the results are interpreted with a graphitization model. (author)

[Modern approaches to the planning of the medical material support in conditions of daily activities].

Science.gov (United States)

Miroshnichenko, Iu V; Goriachev, A B; Krasavin, K D; Tikhonov, A V

2012-07-01

There are requirements producing to the planning in modem social and economic conditions: solidarity, participation, continuity, flexibility, accuracy. The authors made a conclusion that the main target of the planning of the medical material support is creating of conditions for highly effective function of the system of medical material support on the basis of long-time forecast of status and development of inner and outer factors.

Functions, Use and Effects of Embedded Support Devices in Printed Distance Learning Materials.

Science.gov (United States)

Martens, Rob; And Others

1996-01-01

To support distance learning, printed materials for the course are enriched with embedded support devices (ESD) such as schemes, illustrations, examples, questions, or margin texts. Results of 3 studies involving 900 Dutch university students indicated that students used and appreciated ESD, and that they led to better study results. (SLD)

Extending E-Book with Contextual Knowledge Recommender for Reading Support on a Web-Based Learning System

Science.gov (United States)

Chen, Gwo-Dong; Wei, Fu-Hsiang; Wang, Chin-Yeh; Lee, Jih-Hsien

2007-01-01

Reading content of the Web is increasingly popular. When students read the same material, each student has a unique comprehension of the text and requires individual support from appropriate references. Most references in typical web learning systems are unorganized. Students are often required to disrupt their reading to locate references. This…

Supporting public health priorities: recommendations for physical education and physical activity promotion in schools.

Science.gov (United States)

Hills, Andrew P; Dengel, Donald R; Lubans, David R

2015-01-01

Physical activity (PA) provides numerous physiological and psychosocial benefits. However, lifestyle changes, including reduced PA opportunities in multiple settings, have resulted in an escalation of overweight and obesity and related health problems. Poor physical and mental health, including metabolic and cardiovascular problems is seen in progressively younger ages, and the systematic decline in school PA has contributed to this trend. Of note, the crowded school curriculum with an intense focus on academic achievement, lack of school leadership support, funding and resources, plus poor quality teaching are barriers to PA promotion in schools. The school setting and physical educators in particular, must embrace their role in public health by adopting a comprehensive school PA program. We provide an overview of key issues and challenges in the area plus best bets and recommendations for physical education and PA promotion in the school system moving forward. Copyright © 2014. Published by Elsevier Inc.

Materials and boiler rig testing to support chemical cleaning of once-through AGR boilers

International Nuclear Information System (INIS)

Tice, D.R.; Platts, N.; Raffel, A.S.; Rudge, A.

2002-01-01

An extensive programme of work has been carried out to evaluate two candidate inhibited cleaning solutions for possible implementation on plant, which would be the first chemical clean of an AGR boiler. The two candidate cleaning solutions considered were a Stannine-inhibited citric acid/formic acid mixture (GOM106) and inhibited hydrofluoric acid. Citric acid-based cleaning processes are widely used within the UK Power Industry. The GOM106 solution, comprising a mixture of 3% citric acid, 0.5% formic acid and 0.05% Stannine LTP inhibitor, buffered with ammonia to pH 3.5, was developed specifically for the AGR boilers during the 1970's. Although a considerable amount of materials testing work was carried out by British Energy's predecessor companies to produce a recommended cleaning procedure there were some remaining concerns with the use of GOM106, from these earlier studies, for example, an increased risk of pitting attack associated with the removal of thick 9Cr oxide deposits and a risk of unacceptable damage in critical locations such as the upper transition joints and other weld locations. Hence, additional testing was still required to validate the solution for use on plant. Inhibited hydrofluoric acid (HFA) was also evaluated as an alternative reagent to GOM106. HFA has been used extensively for cleaning mild and low'alloy steel boiler tubes in fossil-fired plant in the UK and elsewhere in Europe and is known to remove oxide quickly. Waste treatment is also easier than for the GOM106 process and some protection against damage to the boiler tube materials is provided by complexing of fluoride with ferric ion. Validation of the potential reagents and inhibitors was achieved by assessing the rate and effectiveness of oxide removal from specimens of helical boiler tubing and welds, together with establishing the extent of any metal loss or localised damage. The initial materials testing resulted in the inhibited ammoniated citric / formic acid reagent being

The Definition of Novelty in Recommendation System

Directory of Open Access Journals (Sweden)

Liang Zhang

2013-01-01

Full Text Available With the development of information technology and application of the Internet, People gradually entered the time of information overload from information scarcity. User satisfaction with recommender systems is related not only to how accurately the system recommends but also to how much it supports the user’s decision making. Novelty is one of the important metrics of customer satisfaction. There is an increasing realization in the Recommender Systems (RS field that novelty is fundamental qualities of recommendation effectiveness and added-value. This paper combed research results about definition and algorithm of novel recommendation, and starting from the meaning of "novel", defined novelty of item in recommendation system. Experiment proved using the definition of novelty to recommend can effectively recognize the item that the user is familiar with and ensure certain accuracy.

Law project on the radioactive materials and wastes management 2006 recommendations presented by Anne Duthilleul; Projet de loi sur la gestion des matieres et des dechets radioactifs 2006 avis presente par Mme Anne Duthilleul

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This document provides recommendations on the law project concerning the radioactive material and wastes management. It precises the law objectives, the french particularities concerning the radioactive wastes and materials management, the public debate in France, the evaluation of the researches, the recommendations of the economic and social council. (A.L.B.)

Guidance Tools for Use in Nuclear Material Management Decisions Making

Energy Technology Data Exchange (ETDEWEB)

Johnson, G. V.; Baker, D. J.; Sorenson, K. B.; Boeke, S. G.

2002-02-26

This paper describes the results of Recommendation 14 of the Integrated Nuclear Materials Management Plan (INMMP) which was the product of a management initiative at the highest levels of the Department of Energy responding to a congressional directive to accelerate the work of achieving integration and cutting long-term costs associated with the management of nuclear materials, with the principal focus on excess materials. The INMMP provided direction to ''Develop policy-level decision support tools to support long-term planning and decision making.'' To accomplish this goal a team from the Savannah River Site, Sandia National Laboratories, Idaho National Engineering and Environmental Laboratory (INEEL), and the U.S. Department of Energy experienced in the decision-making process developed a Guidebook to Decision-Making Methods. The goal of the team organized to implement Recommendation 14 was to instill transparency, consistency, rigor, and discipline in the DOE decision process. The guidebook introduces a process and a selection of proven methods for disciplined decision-making so that the results are clearer, more transparent, and easier for reviewers to understand and accept. It was written to set a standard for a consistent decision process.

Materials choices for the advanced LWR steam generators

International Nuclear Information System (INIS)

Paine, J.P.N.; Shoemaker, C.E.; McIlree, A.R.

1987-01-01

Current light water reactor (LWR) steam generators have been affected by a variety of corrosion and mechanical damage degradation mechanisms. Included are wear caused by tube vibration, intergranular corrosion, pitting, and thinning or wastage of the steam generator tubing and accelerated corrosion of carbon steel supports (denting). The Electric Power Research Institute (EPRI) and the Steam Generator Owners Groups (I, II) have sponsored laboratory and field studies to provide ameliorative actions for the majority of the damage forms experienced to date. Some of the current corrosion mechanisms are aggravated or caused by unique materials choices or materials interactions. New materials have been proposed and at least partially qualified for use in replacement model steam generators, including an advanced LWR design. In so far as possible, the materials choices for the advanced LWR steam generator avoid the corrosion pitfalls seemingly inherent in the current designs. The EPRI Steam Generator Project staff has recommended materials and design choices for a new steam generator. Based on these recommendations we believe that the advanced LWR steam generators will be much less affected by corrosion and mechanical damage mechanisms than are now experienced

Influence of the supporting die structures on the fracture strength of all-ceramic materials.

Science.gov (United States)

Yucel, Munir Tolga; Yondem, Isa; Aykent, Filiz; Eraslan, Oğuz

2012-08-01

This study investigated the influence of the elastic modulus of supporting dies on the fracture strengths of all-ceramic materials used in dental crowns. Four different types of supporting die materials (dentin, epoxy resin, brass, and stainless steel) (24 per group) were prepared using a milling machine to simulate a mandibular molar all-ceramic core preparation. A total number of 96 zirconia cores were fabricated using a CAD/CAM system. The specimens were divided into two groups. In the first group, cores were cemented to substructures using a dual-cure resin cement. In the second group, cores were not cemented to the supporting dies. The specimens were loaded using a universal testing machine at a crosshead speed of 0.5 mm/min until fracture occurred. Data were statistically analyzed using two-way analysis of variance and Tukey HSD tests (α = 0.05). The geometric models of cores and supporting die materials were developed using finite element method to obtain the stress distribution of the forces. Cemented groups showed statistically higher fracture strength values than non-cemented groups. While ceramic cores on stainless steel dies showed the highest fracture strength values, ceramic cores on dentin dies showed the lowest fracture strength values among the groups. The elastic modulus of the supporting die structure is a significant factor in determining the fracture resistance of all-ceramic crowns. Using supporting die structures that have a low elastic modulus may be suitable for fracture strength tests, in order to accurately reflect clinical conditions.

Electrostatic Levitation: A Tool to Support Materials Research in Microgravity

Science.gov (United States)

Rogers, Jan; SanSoucie, Mike

2012-01-01

Containerless processing represents an important topic for materials research in microgravity. Levitated specimens are free from contact with a container, which permits studies of deeply undercooled melts, and high-temperature, highly reactive materials. Containerless processing provides data for studies of thermophysical properties, phase equilibria, metastable state formation, microstructure formation, undercooling, and nucleation. The European Space Agency (ESA) and the German Aerospace Center (DLR) jointly developed an electromagnetic levitator facility (MSL-EML) for containerless materials processing in space. The electrostatic levitator (ESL) facility at the Marshall Space Flight Center provides support for the development of containerless processing studies for the ISS. Apparatus and techniques have been developed to use the ESL to provide data for phase diagram determination, creep resistance, emissivity, specific heat, density/thermal expansion, viscosity, surface tension and triggered nucleation of melts. The capabilities and results from selected ESL-based characterization studies performed at NASA's Marshall Space Flight Center will be presented.

Recommendations and Suggestions of the IRRS Mission in Croatia

International Nuclear Information System (INIS)

Novosel, N.

2016-01-01

According to the Act on Radiological and Nuclear Safety, Director General of the State Office for Radiological and Nuclear Safety (SORNS) is obliged to conduct self-assessment of the national legislative framework and of the competent authorities and to provide for international audit of important segments of the national legislative framework and competent authorities with the purpose of continuous improvement of radiological and nuclear safety. SORNS as a state administration body competent for activities pertaining to radiological and nuclear safety, submitted in April 2013 the request to the International Atomic Energy Agency (IAEA) to conduct an Integrated Regulatory Review Service (IRRS) mission. SORNS conducted a self-assessment in preparation for the mission and prepared a preliminary action plan. The results of SORNS self-assessment and supporting documentation were provided to the IRRS review team as advance reference material for the mission. IRRS mission took place in Zagreb from 7 to 17 Jun 2015. The IRRS team carried out the review in the following areas: responsibilities and functions of the government; the global nuclear safety regime; responsibilities and functions of the regulatory body; the management system of the regulatory body; the activities of the regulatory body including authorization, review and assessment, inspection and enforcement processes; development and content of regulations and guides; emergency preparedness and response; occupational radiation protection, patient protection, public and environmental exposure control, waste management and decommissioning. The IRRS team identified a number of recommendations and suggestions where improvements in the area of radiological and nuclear safety are necessary or desirable. Those recommendations and suggestions were translated and approved by the Government in the form of the Governmental conclusion. This conclusion presents the action plan for the SORNS and other governmental bodies and

Role IAEA implementation of ICRP-60 on regulations the safe transport of radioactive material

International Nuclear Information System (INIS)

Elshinawy, R.K.M.; Gomaa, M.A.

1994-01-01

In november 1990, the (ICRP) adopted its 1990 recommendations (ICRP-60) ( 1). These recommendations will significantly influence not only IAEA's basic safety standards (safety series 9) ( 2), but also the IAEA regulations for the safe transport of radioactive material ( 3) and its supporting documents ( 4-6). IAEA experts are currently engaged in the revision of the transport regulations. This revision process led to the publication of the revised transport regulations of 1966. The transport regulations are developed to ensure safety during movement of radioactive materials, and to provide reasonable assurance that the transport activities comply with the basic safety standards for radiation protection

My-Bookstore: Using Information Technology to Support Children's Classroom Reading and Book Recommendation

Science.gov (United States)

Chien, Tzu-Chao; Chen, Zhi-Hong; Ko, Hwa-Wei; Ku, Yu-Min; Chan, Tak-Wai

2015-01-01

This paper describes a learning system, named My-Bookstore, where students buy (make records of) books (paper books) which they have read, and then sell (recommend) the books they like to others. This system is designed to encourage elementary students' classroom reading and book recommendation. The long-term influence of the My-Bookstore system…

The control of vehicles used in transport of sensitive nuclear material

International Nuclear Information System (INIS)

Loiseau, O.; Larrignon, D.; Autrusson, B.

2010-01-01

Most sensitive nuclear materials are usually shipped in specific vehicles with a reinforced protection; such vehicles are generally escorted, tracked and watched over from a distant control centre. Among the various publications made by the IAEA in relation with the CPPNM, the INFCIRC/225 introduces major recommendations for physical protection of nuclear materials in general and particularly during transport. For instance, the text recommends - for the terrestrial shipment of most sensitive material - the use of vehicles specially designed to resist attack and equipped with a vehicle disabling device. Applying such a recommendation at a state level requires the intervention of a competent authority; the competent authority defines the framework of a validation process starting with the design of the vehicle and ending with the vehicle protection approval. The validation process needs articulating responsibilities between the three major actors who are: the operator in charge of the design, a technical support body in charge of technical evaluation, and the competent authority who is responsible for the final approval of the protection. This paper focuses on the approval process of reinforced protection vehicles in France; it aims at showing how such a process may contribute to the security of nuclear material shipments. The paper notably focuses on the responsibilities of the operators, the competent authority and the technical support organization. This approval process of the protection of a vehicle allows the authority to ensure that the protection setup is effective and operational in order to protect the cargo from a malicious threat. In such a process, the authority defines the threat and the objectives of protection; the authority may choose, in certain case, to recommend protection devices or solutions; the need for recommendation versus objective definition mostly depends on the environment of the vehicle and the constraints induced. The authority may

Nanostructured TiOx as a catalyst support material for proton exchange membrane fuel cells

Science.gov (United States)

Phillips, Richard S.

Recent interest in the development of new catalyst support materials for proton exchange membrane fuel cells (PEMFCs) has stimulated research into the viability of TiO2-based support structures. Specifically, substoichiometric TiO2 (TiOx) has been reported to exhibit a combination of high conductivity, stability, and corrosion resistance. These properties make TiOx-based support materials a promising prospect when considering the inferior corrosion resistance of traditional carbon-based supports. This document presents an investigation into the formation of conductive and stable TiOx thin films employing atomic layer deposition (ALD) and a post deposition oxygen reducing anneal (PDORA). Techniques for manufacturing TiOx-based catalyst support nanostructures by means of ALD in conjunction with carbon black (CB), anodic aluminum oxide (AAO) and silicon nanowires (SiNWs) will also be presented. The composition and thickness of resulting TiOx thin films was determined with the aid of Auger electron spectroscopy (AES), Rutherford backscattering spectrometry (RBS), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). Film crystal structure was determined with X-ray diffraction (XRD) analysis. Film conductivity was calculated using four-point probe (4-PP) and film thickness measurement data. Resulting thin films show a significant decrease of oxygen in ALD TiOx films corresponding with a great increase in conductivity following the PDORA. The effectiveness of the PDORA was also found to be highly dependent on ALD process parameters. TiOx-based nanostructures were coated with platinum using one of three Pt deposition techniques. First, liquid phase deposition (LPD), which was performed at room temperature, provided equal access to catalyst support material surfaces which were suspended in solution. Second, plasma enhanced atomic layer deposition (PEALD), which was performed at 450°C, provided good Pt

A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers

International Nuclear Information System (INIS)

Ribeiro, I.; Peças, P.; Henriques, E.

2013-01-01

Highlights: • Life cycle framework to support material selection in Ecodesign. • Early design stage estimates and sensitivity analyses based on process-based models. • Sensitivity analysis to product geometry, industrial context and EoL scenarios. • Cost and environmental performance comparison – BDP vs. fossil based polymers. • Best alternatives mapping integrating cost and environmental performances. - Abstract: Nowadays society compels designers to develop more sustainable products. Ecodesign directs product design towards the goal of reducing environmental impacts. Within Ecodesign, materials selection plays a major role on product cost and environmental performance throughout its life cycle. This paper proposes a comprehensive life cycle framework to support Ecodesign in material selection. Dealing with new materials and technologies in early design stages, process-based models are used to represent the whole life cycle and supply integrated data to assess material alternatives, considering cost and environmental dimensions. An integrated analysis is then proposed to support decision making by mapping the best alternative materials according to the importance given to upstream and downstream life phases and to the environmental impacts. The proposed framework is applied to compare the life cycle performance of injection moulded samples made of four commercial biodegradable polymers with different contents of Thermo Plasticized Starch and PolyLactic Acid and a common fossil based polymer, Polypropylene. Instead of labelling materials just as “green”, the need to fully capture all impacts in the whole life cycle was shown. The fossil based polymer is the best economic alternative, but polymers with higher content of Thermo Plasticized Starch have a better environmental performance. However, parts geometry and EoL scenarios play a major role on the life cycle performance of candidate materials. The selection decision is then supported by mapping

Inorganic Materials as Supports for Covalent Enzyme Immobilization: Methods and Mechanisms

Directory of Open Access Journals (Sweden)

Paolo Zucca

2014-09-01

Full Text Available Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides.

Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5). Recommendations (Spanish Edition); Recomendaciones de Seguridad Fisica Nuclear sobre la Proteccion Fisica de los Materiales y las Instalaciones Nucleares (INFCIRC/225/Rev.5). Recomendaciones

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-15

This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

Requirements for Semantic Educational Recommender Systems in Formal E-Learning Scenarios

Directory of Open Access Journals (Sweden)

Jesus G. Boticario

2011-07-01

Full Text Available This paper analyzes how recommender systems can be applied to current e-learning systems to guide learners in personalized inclusive e-learning scenarios. Recommendations can be used to overcome current limitations of learning management systems in providing personalization and accessibility features. Recommenders can take advantage of standards-based solutions to provide inclusive support. To this end we have identified the need for developing semantic educational recommender systems, which are able to extend existing learning management systems with adaptive navigation support. In this paper we present three requirements to be considered in developing these semantic educational recommender systems, which are in line with the service-oriented approach of the third generation of learning management systems, namely: (i a recommendation model; (ii an open standards-based service-oriented architecture; and (iii a usable and accessible graphical user interface to deliver the recommendations.

A Comparison of implant impression precision: Different materials and techniques

Science.gov (United States)

Tabesh, Mahtab; Alikhasi, Marzieh

2018-01-01

Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (Pimpression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

Preference Elicitation and Negotiation in a Group Recommender System

OpenAIRE

Álvarez Márquez , Jesús ,; Ziegler , Jurgen

2015-01-01

International audience; We present a novel approach to group recommender systems that better takes into account the social interaction in a group when formulating, discussing and negotiating the features of the item to be jointly selected. Our approach provides discussion support in a collaborative preference elicitation and negotiation process. Individual preferences are continuously aggregated and immediate feedback of the resulting recommendations is provided. We also support the last stag...

Tanks 18 And 19-F Structural Flowable Grout Fill Material Evaluation And Recommendations

International Nuclear Information System (INIS)

Langton, C. A.; Stefanko, D. B.

2013-01-01

Cementitious grout will be used to close Tanks 18-F and 19-F. The functions of the grout are to: 1) physically stabilize the final landfill by filling the empty volume in the tanks with a non-compressible material; 2) provide a barrier for inadvertent intrusion into the tank; 3) reduce contaminant mobility by a) limiting the hydraulic conductivity of the closed tank and b) reducing contact between the residual waste and infiltrating water; and 4) providing an alkaline, chemically reducing environment in the closed tank to control speciation and solubility of selected radionuclides. The objective of this work was to identify a single (all-in-one) grout to stabilize and isolate the residual radionuclides in the tank, provide structural stability of the closed tank and serve as an inadvertent intruder barrier. This work was requested by V. A. Chander, High Level Waste (HLW) Tank Engineering, in HLW-TTR-2011-008. The complete task scope is provided in the Task Technical and QA Plan, SRNL-RP-2011-00587 Revision 0. The specific objectives of this task were to: 1) Identify new admixtures and dosages for formulating a zero bleed flowable tank fill material selected by HLW Tank Closure Project personnel based on earlier tank fill studies performed in 2007. The chemical admixtures used for adjusting the flow properties needed to be updated because the original admixture products are no longer available. Also, the sources of cement and fly ash have changed, and Portland cements currently available contain up to 5 wt. % limestone (calcium carbonate). 2) Prepare and evaluate the placement, compressive strength, and thermal properties of the selected formulation with new admixture dosages. 3) Identify opportunities for improving the mix selected by HLW Closure Project personnel and prepare and evaluate two potentially improved zero bleed flowable fill design concepts; one based on the reactor fill grout and the other based on a shrinkage compensating flowable fill mix design. 4

Tanks 18 And 19-F Structural Flowable Grout Fill Material Evaluation And Recommendations

Energy Technology Data Exchange (ETDEWEB)

Langton, C. A.; Stefanko, D. B.

2013-04-23

Cementitious grout will be used to close Tanks 18-F and 19-F. The functions of the grout are to: 1) physically stabilize the final landfill by filling the empty volume in the tanks with a non-compressible material; 2) provide a barrier for inadvertent intrusion into the tank; 3) reduce contaminant mobility by a) limiting the hydraulic conductivity of the closed tank and b) reducing contact between the residual waste and infiltrating water; and 4) providing an alkaline, chemically reducing environment in the closed tank to control speciation and solubility of selected radionuclides. The objective of this work was to identify a single (all-in-one) grout to stabilize and isolate the residual radionuclides in the tank, provide structural stability of the closed tank and serve as an inadvertent intruder barrier. This work was requested by V. A. Chander, High Level Waste (HLW) Tank Engineering, in HLW-TTR-2011-008. The complete task scope is provided in the Task Technical and QA Plan, SRNL-RP-2011-00587 Revision 0. The specific objectives of this task were to: 1) Identify new admixtures and dosages for formulating a zero bleed flowable tank fill material selected by HLW Tank Closure Project personnel based on earlier tank fill studies performed in 2007. The chemical admixtures used for adjusting the flow properties needed to be updated because the original admixture products are no longer available. Also, the sources of cement and fly ash have changed, and Portland cements currently available contain up to 5 wt. % limestone (calcium carbonate). 2) Prepare and evaluate the placement, compressive strength, and thermal properties of the selected formulation with new admixture dosages. 3) Identify opportunities for improving the mix selected by HLW Closure Project personnel and prepare and evaluate two potentially improved zero bleed flowable fill design concepts; one based on the reactor fill grout and the other based on a shrinkage compensating flowable fill mix design. 4

Is carbon-supported Pt-WOx composite a CO-tolerant material?

International Nuclear Information System (INIS)

Maillard, F.; Peyrelade, E.; Soldo-Olivier, Y.; Chatenet, M.; Chainet, E.; Faure, R.

2007-01-01

Pt-WO x /C composite materials elaborated via a two-step impregnation/electrochemical reduction method have been characterized and tested for the electrooxidation of CO/H 2 mixtures. TEM and EDS measurements revealed that WO x covered imperfectly the C particles. Nanometer-sized or agglomerated Pt particles were found on the WO x /C surface. XRD measurements revealed the absence of diffraction peaks characteristic of crystalline WO x and could indicate that this material is amorphous. No evidence of alloying between the Pt and W was observed. A significant improvement toward the electrooxidation of a CO ads monolayer was observed for the composite material compared to pure Pt/C electrocatalyst, which is evidenced by a new electrooxidation peak at 0.55V versus RHE (v=0.02Vs -1 ). As the electrical charge below this electrooxidation peak is sweep rate dependant, it is probably associated to the electrooxidation of CO ads on Pt sites at the interface with the WO x /C support. The performance of the Pt-WO x /C material for the electrooxidation of CO/H 2 mixtures was tested by polarization curves under steady-state conditions (0.001Vs -1 ) or potentiostatic measurements under fuel cell relevant conditions and compared with that of commercial 20wt% Pt/C and Pt-Ru/C materials

Physicists purchase materials testing machine in support of pioneering particle physics experiments

CERN Multimedia

Sharpe, Suzanne

2007-01-01

"The particle physics group at Liverpool University has purchased an LRXPlus singlecolumn materials testing machine from Lloyd Instruments, which will be used to help characterise the carbon-fibre support frames for detectors used for state-of-the-art particle physics experiments." (1 page)

Report of the Material Control and Material Accounting Task Force

International Nuclear Information System (INIS)

1978-03-01

In September 1977 a Task Force was formed to complete a study of the role of material control and material accounting in NRC's safeguards program. The Task Force's assignment was to: define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for the material control and material accounting systems based on their roles and objectives; assess the extent to which the existing safeguards regulatory base meets or provides the capability to meet the recommended goals; and provide direction for material control and material accounting development, including both near-term and long-term upgrades. The study was limited to domestic nuclear facilities possessing significant amounts of plutonium, uranium-233 or highly enriched uranium in unsealed form. The Task Force findings are reported

Uncovering the information core in recommender systems

Science.gov (United States)

Zeng, Wei; Zeng, An; Liu, Hao; Shang, Ming-Sheng; Zhou, Tao

2014-08-01

With the rapid growth of the Internet and overwhelming amount of information that people are confronted with, recommender systems have been developed to effectively support users' decision-making process in online systems. So far, much attention has been paid to designing new recommendation algorithms and improving existent ones. However, few works considered the different contributions from different users to the performance of a recommender system. Such studies can help us improve the recommendation efficiency by excluding irrelevant users. In this paper, we argue that in each online system there exists a group of core users who carry most of the information for recommendation. With them, the recommender systems can already generate satisfactory recommendation. Our core user extraction method enables the recommender systems to achieve 90% of the accuracy of the top-L recommendation by taking only 20% of the users into account. A detailed investigation reveals that these core users are not necessarily the large-degree users. Moreover, they tend to select high quality objects and their selections are well diversified.

Uranium reference materials

International Nuclear Information System (INIS)

Donivan, S.; Chessmore, R.

1987-07-01

The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

Recommendations from the workshop on Comparative Approaches to Safety Assessment of GM Plant Materials: A road toward harmonized criteria?

Science.gov (United States)

Bartholomaeus, Andrew; Batista, Juan Carlos; Burachik, Moisés; Parrott, Wayne

2015-01-01

An international meeting of genetically modified (GM) food safety assessors from the main importing and exporting countries from Asia and the Americas was held in Buenos Aires, Argentina, between June 26(th) and 28(th), 2013. Participants shared their evaluation approaches, identified similarities and challenges, and used their experience to propose areas for future work. Recommendations for improving risk assessment procedures and avenues for future collaboration were also discussed. The deliberations of the meeting were also supported by a survey of participants which canvassed risk assessment approaches across the regions from which participants came. This project was initiated by Argentine Agri-Food Health and Quality National Service (SENASA, Ministry of Agriculture, Argentina), with the support of the International Life Sciences Institute (ILSI) and other partner institutions. The importance of making all possible efforts toward more integrated and harmonized regulatory oversight for GM organisms (GMOs) was strongly emphasized. This exercise showed that such harmonization is a feasible goal that would contribute to sustain a fluid trade of commodities and ultimately enhance food security. Before this can be achieved, key issues identified in this meeting will have to be addressed in the near future to enable regulatory collaboration or joint work. The authors propose that the recommendations coming out of the meeting should be used as a basis for continuing work, follow up discussions and concrete actions.

Supporting system in emergency response plan for nuclear material transport accidents

International Nuclear Information System (INIS)

Nakagome, Y.; Aoki, S.

1993-01-01

As aiming to provide the detailed information concerning nuclear material transport accidents and to supply it to the concerned organizations by an online computer, the Emergency Response Supporting System has been constructed in the Nuclear Safety Technology Center, Japan. The system consists of four subsystems and four data bases. By inputting initial information such as name of package and date of accident, one can obtain the appropriate initial response procedures and related information for the accident immediately. The system must be useful for protecting the public safety from nuclear material transport accidents. But, it is not expected that the system shall be used in future. (J.P.N.)

A method for evaluating discoverability and navigability of recommendation algorithms.

Science.gov (United States)

Lamprecht, Daniel; Strohmaier, Markus; Helic, Denis

2017-01-01

Recommendations are increasingly used to support and enable discovery, browsing, and exploration of items. This is especially true for entertainment platforms such as Netflix or YouTube, where frequently, no clear categorization of items exists. Yet, the suitability of a recommendation algorithm to support these use cases cannot be comprehensively evaluated by any recommendation evaluation measures proposed so far. In this paper, we propose a method to expand the repertoire of existing recommendation evaluation techniques with a method to evaluate the discoverability and navigability of recommendation algorithms. The proposed method tackles this by means of first evaluating the discoverability of recommendation algorithms by investigating structural properties of the resulting recommender systems in terms of bow tie structure, and path lengths. Second, the method evaluates navigability by simulating three different models of information seeking scenarios and measuring the success rates. We show the feasibility of our method by applying it to four non-personalized recommendation algorithms on three data sets and also illustrate its applicability to personalized algorithms. Our work expands the arsenal of evaluation techniques for recommendation algorithms, extends from a one-click-based evaluation towards multi-click analysis, and presents a general, comprehensive method to evaluating navigability of arbitrary recommendation algorithms.

Application of international recommendations and guidance on low level radioactive waste management and remediation of contaminated land at the national level: Experience of regulatory support in Northwest Russia

International Nuclear Information System (INIS)

Sneve, M.; Smith, G.M.; Kerrigan, E

2005-01-01

This paper notes the developments in international recommendations on radioactive waste management and remediation of contaminated land and considers their implementation in the context of the Norwegian Plan of Action to improve nuclear safety in North West Russia. Summary information is provided on projects to implement waste management activities (so-called Industrial Projects) and on projects to support regulatory supervision of waste management activities (so-called Regulatory Support Projects). The links between international recommendations and national practice are discussed and it is concluded that, in practice, the details of national standards differ both among themselves and, in some respects, from the recommendations of the ICRP and IAEA. Examples of further potential collaboration projects are listed. While separate responsibilities among organisations have to clear and maintained, combined involvement of operators and regulators is recognised as a prioritised area in future cooperation between NRPA and Russia. (author)

Improving the dependability of research in personality and social psychology: recommendations for research and educational practice.

Science.gov (United States)

Funder, David C; Levine, John M; Mackie, Diane M; Morf, Carolyn C; Sansone, Carol; Vazire, Simine; West, Stephen G

2014-02-01

In this article, the Society for Personality and Social Psychology (SPSP) Task Force on Publication and Research Practices offers a brief statistical primer and recommendations for improving the dependability of research. Recommendations for research practice include (a) describing and addressing the choice of N (sample size) and consequent issues of statistical power, (b) reporting effect sizes and 95% confidence intervals (CIs), (c) avoiding "questionable research practices" that can inflate the probability of Type I error, (d) making available research materials necessary to replicate reported results, (e) adhering to SPSP's data sharing policy, (f) encouraging publication of high-quality replication studies, and (g) maintaining flexibility and openness to alternative standards and methods. Recommendations for educational practice include (a) encouraging a culture of "getting it right," (b) teaching and encouraging transparency of data reporting, (c) improving methodological instruction, and (d) modeling sound science and supporting junior researchers who seek to "get it right."

Mesoporous TiO2 : an alternative material for PEM fuel cells catalyst support

Energy Technology Data Exchange (ETDEWEB)

Do, T.B. [Michigan Univ., Ann Arbor, MI (United States). Dept. of Materials Science; Ruthkosky, M.; Cai, M. [General Motors, Warren, MI (United States). Research and Development Center

2008-07-01

This paper discussed the feasibility of using an alternative catalyst support material to replace carbon in proton exchange membrane (PEM) fuel cells. The alternative catalyst support material requires a high surface area with a large porosity but must have comparable conductivity with carbon. A mesoporous titanium oxide (TiO2) material produced by coprecipitation was introduced. The conductivity of the material is about one order of that of carbon. The 8 mole per cent Nb-doped TiO2 was formed and deposited on the surface of a nano polystyrene (PS) template via the hydrolysis of a co-solution of Ti(OC4H9)4 and Nb(OC2H5)5. The removal of PS by heat treatment produced porous structure of TiO2 with the appearance of 3 different pore types, notably open pore, ink-pot pores and closed pores. TiO2 formed from the rutile phase, allowing a lower activation temperature at 850 degrees C in a hydrogen atmosphere. The pore structures were retained after this heat treatment. The BET surface area was 116 m{sup 2}/g, porosity was 22 per cent and the average pore size was 159 angstrom. The conductivity improved considerably from almost non-conductive to one order of that of carbon.

REPORT AND RECOMMENDATION FOR LEARNING MATERIALS CENTER.

Science.gov (United States)

KEIM, WILLIAM A.; AND OTHERS

THIS REPORT IS A HISTORY OF THE DEVELOPMENT OF A SET OF EDUCATIONAL SPECIFICATIONS FOR THE EXPANSION OF AN EXISTING LIBRARY AND THE ADDITION OF AN INSTRUCTIONAL MATERIALS CENTER. PRELIMINARY CONSIDERATION WAS GIVEN TO THE METHODS OF INSTRUCTION AT THE COLLEGE, THE STUDENTS, THE FACULTY, AND THE AVAILABLE FINANCIAL RESOURCES. A GENERAL STUDY…

Evaluating Recommender Systems for Technology Enhanced Learning: A Quantitative Survey

Science.gov (United States)

Erdt, Mojisola; Fernandez, Alejandro; Rensing, Christoph

2015-01-01

The increasing number of publications on recommender systems for Technology Enhanced Learning (TEL) evidence a growing interest in their development and deployment. In order to support learning, recommender systems for TEL need to consider specific requirements, which differ from the requirements for recommender systems in other domains like…

Dispositions Supporting Elementary Interns in the Teaching of Reform-Based Science Materials

Science.gov (United States)

Eick, Charles J.; Stewart, Bethany

2010-01-01

Dispositions supporting the teaching of science as structured inquiry by four elementary candidates are presented. Candidates were studied during student teaching based on their positive attitudes toward teaching science with reform-based materials in their methods course. Personal learning histories informed their attitudes, values, and beliefs…

Investigating Teacher Learning Supports in High School Biology Curricular Programs to Inform the Design of Educative Curriculum Materials

Science.gov (United States)

Beyer, Carrie J.; Delgado, Cesar; Davis, Elizabeth A.; Krajcik, Joseph

2009-01-01

Reform efforts have emphasized the need to support teachers' learning about reform-oriented practices. Educative curriculum materials are one potential vehicle for promoting teacher learning about these practices. Educative curriculum materials include supports that are intended to promote both student "and" teacher learning. However, little is…

A recommended program of tritium monitoring research and development

International Nuclear Information System (INIS)

Nickerson, S.B.; Gerdingh, R.F.; Penfold, K.

1982-10-01

This report presents recommendations for programs of research and development in tritium monitoring instrumentation. These recommendations, if implemented, will offer Canadian industry the opportunity to develop marketable instruments. The major recommendations are to assist in the development and promotion of two Chalk River Nuclear Laboratories' monitors and an Ontario Hydro monitor, and to support research and development of a surface monitor

Planning and support materials in teaching story comprehension from the interbehavioral approach

Directory of Open Access Journals (Sweden)

Ana Cristina Mascareño Bórquez

2017-12-01

Full Text Available Despite the latest changes in educational reforms within the country, curriculum plans and ongoing program renewals aimed at resolving the educational gap reflected in national statistics, the results remain unfavorable. This leads to reflection and analysis to generate and implement new forms and teaching strategies. The purpose of this paper is to present the design of an alternative proposal for planning and the development of support materials, developed according to the second block of sixth grade primary education, in two expected learning contained in the formal basic education curriculum. Centered on the interaction in teaching-learning and according to different levels of functional aptitude. Subsequently it underwent a process of piloting and revision by experts to prove the pertinence of the planning and precisions for its implementation. As results, the support materials and the planning proposal are presented and discussed with the authors who have worked on planning proposals from the inter-behavioral approach.

Data collection handbook to support modeling the impacts of radioactive material in soil

International Nuclear Information System (INIS)

Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E.; Loureiro, C.; Chia, Y.P.

1993-04-01

A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications

Data collection handbook to support modeling the impacts of radioactive material in soil

Energy Technology Data Exchange (ETDEWEB)

Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.; Loureiro, C. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Escola de Engenharia; Chia, Y.P. [National Taiwan Univ., Taipei (Taiwan, Province of China). Dept. of Geology

1993-04-01

A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications.

Assessment of Materials Issues for Light-Water Small Modular Reactors

Energy Technology Data Exchange (ETDEWEB)

Sandusky, David; Lunceford, Wayne; Bruemmer, Stephen M.; Catalan, Michael A.

2013-02-01

The primary objective of this report is to evaluate materials degradation issue unique to the operational environments of LWSMR. Concerns for specific primary system components and materials are identified based on the review of design information shared by mPower and NuScale. Direct comparisons are made to materials issues recognized for advanced large PWRs and research activities are recommended as needed. The issues identified are intended to improve the capability of industry to evaluate the significance of any degradation that might occur during long-term LWSMR operation and by extension affect the importance of future supporting R&D.

Evaluation of design feature No.20 -- Ground support options

International Nuclear Information System (INIS)

Duan, F.

2000-01-01

Ground support options are primarily evaluated for emplacement drifts while ground support systems for non-emplacement openings such as access mains and ventilation drifts are not evaluated against LADS evaluation criteria in this report. Considerations include functional requirements for ground support, the use of a steel-lined system, and the feasibility of using an unlined ground support system principally with grouted rock bolts for permanent ground support. The feature evaluation also emphasizes the postclosure effects of ground support materials on waste isolation and the preclosure aspects such as durability, maintainability, constructibility, safety, engineering acceptability, and cost. This evaluation is to: (A) Review the existing analyses, reports, and studies regarding this design feature, and compile relevant information on performance characteristics. (B) Develop an appropriate evaluation approach for evaluating ground support options against evaluation criteria provided by the LADS team. (C) Evaluate ground support options not only for their preclosure performance in terms of drift stability, material durability, maintenance, constructibility, and cost, but also for their postclosure performance in terms of chemical effects of ground support materials (i.e., concrete, steel) on waste isolation and radionuclide transport. Specifically, the scope for ground support options evaluation include: (1) all steel-lined drifts (no cementitious materials), (2) unlined drifts with minimum cementitious materials (e.g., grout for rockbolts), and (3) concrete-lined drifts, with the focus on the postclosure acceptability evaluation. In addition, unlined drifts with zero cementitious materials (e.g., use of frictional bolts such as split sets, Swellex bolts) are briefly discussed. (D) Identify candidate ground support systems that have the potential to enhance the repository performance based on the feature evaluation. and (E) Provide conclusions and recommendations

BIM-Based Decision Support System for Material Selection Based on Supplier Rating

Directory of Open Access Journals (Sweden)

Abiola Akanmu

2015-12-01

Full Text Available Material selection is a delicate process, typically hinged on a number of factors which can be either cost or environmental related. This process becomes more complicated when designers are faced with several material options of building elements and each option can be supplied by different suppliers whose selection criteria may affect the budgetary and environmental requirements of the project. This paper presents the development of a decision support system based on the integration of building information models, a modified harmony search algorithm and supplier performance rating. The system is capable of producing the cost and environmental implications of different material combinations or building designs. A case study is presented to illustrate the functionality of the developed system.

Assessing readability formula differences with written health information materials: application, results, and recommendations.

Science.gov (United States)

Wang, Lih-Wern; Miller, Michael J; Schmitt, Michael R; Wen, Frances K

2013-01-01

Readability formulas are often used to guide the development and evaluation of literacy-sensitive written health information. However, readability formula results may vary considerably as a result of differences in software processing algorithms and how each formula is applied. These variations complicate interpretations of reading grade level estimates, particularly without a uniform guideline for applying and interpreting readability formulas. This research sought to (1) identify commonly used readability formulas reported in the health care literature, (2) demonstrate the use of the most commonly used readability formulas on written health information, (3) compare and contrast the differences when applying common readability formulas to identical selections of written health information, and (4) provide recommendations for choosing an appropriate readability formula for written health-related materials to optimize their use. A literature search was conducted to identify the most commonly used readability formulas in health care literature. Each of the identified formulas was subsequently applied to word samples from 15 unique examples of written health information about the topic of depression and its treatment. Readability estimates from common readability formulas were compared based on text sample size, selection, formatting, software type, and/or hand calculations. Recommendations for their use were provided. The Flesch-Kincaid formula was most commonly used (57.42%). Readability formulas demonstrated variability up to 5 reading grade levels on the same text. The Simple Measure of Gobbledygook (SMOG) readability formula performed most consistently. Depending on the text sample size, selection, formatting, software, and/or hand calculations, the individual readability formula estimated up to 6 reading grade levels of variability. The SMOG formula appears best suited for health care applications because of its consistency of results, higher level of expected

Report of the Material Control and Material Accounting Task Force: blueprint for the future

International Nuclear Information System (INIS)

1978-03-01

A blueprint is presented for the development of improved material control and material accounting systems by integrating the goals and capabilities of material control and material accounting and recommending specific upgrading actions. An analysis is included of several specific issues and developing recommendations for future actions related to those issues. It is felt that there is a need for a program to define specific quantified goals for an integrated safeguards program, and to monitor safeguards programs in terms of these goals. NRC should give highest priority to developing regulations and guides that will enable material control to make a greater contribution to safeguards by providing greater timeliness and sensitivity in detecting and assessing material losses. It is recommended that a technical study be conducted to determine a quantitative measure or at least a figure of merit for the effectiveness of a security clearance program, based upon full field background investigations, in protecting against malevolent conspiracies involving two or more security cleared individuals. It is also recommended that a specific effort be initiated to formulate an approach to combating collusion. This effort should specifically consider the contribution that material control and material accounting programs can make to safeguards effectiveness in this area

Report of the Material Control and Material Accounting Task Force: summary

International Nuclear Information System (INIS)

1978-03-01

A special review was made of the safeguards maintained by licensees possessing 5 kg or more of strategic special nuclear material (SSNM), i.e., plutonium, uranium-233, or uranium enriched in the uranium-235 isotope to 20 percent or more. A Task Force was formed to define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for material control and material accounting systems based on their roles and objectives; assess the extent to which the existing regulatory base meets or provides the capability to meet the recommended goals; and to provide direction for material control and material accounting development, including both near-term and long-term upgrades. Based on results of Task Force investigations it is recommended that licensee plans for measurement control programs be submitted in response to Section 70.57(c) of Title 10 of the Code of Federal Regulations. Other recommendations include the review and upgrading, as necessary, of measurement error propagation models used by each licensee; revision of Nuclear Materials Management and Safeguards System (NMMSS) reporting entities for SSNM licensees to be consistent with the partitioning of facilities into plants or, if appropriate, accounting units; review of NMMSS reporting entities for SSNM licensees to assure that data for high enriched uranium operations are clearly separated from low enriched uranium operations; upgrading of the editing by NMMSS of reported licensee safeguards data for accuracy and consistency; and the acquisition of (a) a secure interactive computer capability for use in collecting, storing, sorting, and analyzing special nuclear material accounting data, and (b) associated flexible computer software that presents safeguards information in a succinct and comprehensive manner

Cobalt nanosheet arrays supported silicon film as anode materials for lithium ion batteries

International Nuclear Information System (INIS)

Huang, X.H.; Wu, J.B.; Cao, Y.Q.; Zhang, P.; Lin, Y.; Guo, R.Q.

2016-01-01

Cobalt nanosheet arrays supported silicon film is prepared and used as anode materials for lithium ion batteries. The film is fabricated using chemical bath deposition, hydrogen reduction and radio-frequency magnetron sputtering techniques. The microstructure and morphology are characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). In this composite film, the silicon layer is supported by interconnected aligned cobalt nanosheet arrays that act as the three-dimensional current collector and buffering network. The electrochemical performance as anode materials for lithium ion batteries is investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge tests. The results show that the film prepared by sputtering for 1500 s exhibits high capacity, good rate capability and stable cycle ability. It is believed that the cobalt nanosheet arrays play important roles in the electrochemical performance of the silicon layer.

Recommending scientific organization by employees as the example of their prosumer activity

Directory of Open Access Journals (Sweden)

Agnieszka Izabela Baruk

2015-09-01

Full Text Available In the article the problems related to recommending the employer by employees are presented. It is described as the example of employees’ prosumption activity. Transmitting their opinions about the organization as the employer they become the co-creators its image which is one of the key non-material marketing values. The article has theoretical-empirical character. In the theoretical part the essence of prosumption is presented. The special attention is paid to fact that in the literature this appearance is linked with consumption products not with personnel activity. In the empirical part the results of the field researches on recommending employer and its relation determinants are presented. The statistical analysis in the form of correspondence analysis method has been used to these results. It allows to estimate the dependences between analysed variables, to define the power of identified dependences, to show their character, to sort the relation determinants of recommending in the hierarchical system etc. All of the analysed dependences are significant in the statistically meaning. The stronger dependence exists in the case of vertical relation variable in the comparison to the dependence between recommending employer and horizontal relation variable. Of course each of type of organizational relations should be supported by employer because it influences on employees’ identifying with the organization which is the key determinant of the column variable.

Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research.

Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995

International Nuclear Information System (INIS)

1996-04-01

This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research

Word-of-mouth is more than recommendations

DEFF Research Database (Denmark)

Mattsson, Jan; Söderlund, Magnus

2011-01-01

’s telling of what had happened to him/her, in terms of a story, is an additional part of WOM. We also found that customer satisfaction, generally considered a main determinant of WOM (when it is narrowly defined as recommendations), is a less potent predictor of WOM than the level of incongruence......Word-of-mouth (WOM) is often operationalized as recommendations, which is only one among several aspects of WOM. Therefore, a focus on recommendations is likely to misrepresent what customers say to other customers. Our empirical study found support for this argument: we found that the sender...

Fathers' encounter of support from paediatric diabetes teams; the tension between general recommendations and personal experience.

Science.gov (United States)

Boman, Ase; Povlsen, Lene; Dahlborg-Lyckhage, Elisabeth; Hanas, Ragnar; Borup, Ina

2013-05-01

The purpose of this grounded theory study was to explore and discuss how fathers involved in caring for a child with type 1 diabetes experienced support from Swedish paediatric diabetes teams (PDTs) in everyday life with their child. Eleven fathers of children with type 1 diabetes, living in Sweden and scoring high on involvement on the Parental Responsibility Questionnaire, participated. Data were collected from January 2011 to August 2011, initially through online focus group discussions in which 6 of 19 invited fathers participated. Due to high attrition, the data collection continued in eight individual interviews. A semi-structured interview guide was used, and the fathers were asked to share experiences of their PDT's support in everyday life with their child. A simultaneous and constant comparison approach to data collection and analysis allowed the core category to emerge: the tension between general recommendations and personal experience. This core category illuminates how the fathers experienced tension between managing their unique everyday life with their child and balancing this to meet their PDT's expectations with regard to blood glucose levels. The core category was supported by two categories: the tension between the fathers'and their PDT's knowledge, whereby fathers reported discrepancies between their PDT's medical knowledge and their own unique knowledge of their child; and the tension between the fathers'and their PDT's goals, whereby the fathers identified differences between the family's and their PDT's goals. As a dimension of the core category, fathers felt trust or distrust in their PDT. We conclude that to achieve high-quality support for children with diabetes and to enhance their health and well-being, involved fathers' knowledge of their unique family situation needs to be integrated into the diabetes treatment. © 2012 Blackwell Publishing Ltd.

HEALTH OCCUPATIONS SUPPORTIVE TO NURSING, A STATEMENT OF POLICIES AND RECOMMENDATIONS.

Science.gov (United States)

American Nurses' Association, New York, NY.

TO SOLVE THE NURSING PERSONNEL SHORTAGE, THE AMERICAN NURSES' ASSOCIATION RECOMMENDED--(1) THE FIRST PRIORITY FOR FEDERAL MONIES FOR TRAINING HEALTH WORKERS FOR NURSING SERVICES SHOULD BE TO PREPARE REGISTERED NURSES FOR TEACHING, SUPERVISION, AND ADMINISTRATION, (2) A CONCERTED EFFORT SHOULD BE MADE TO RECRUIT YOUNG PEOPLE AND TO ATTRACT INACTIVE…

Modeling mutual feedback between users and recommender systems

Science.gov (United States)

Zeng, An; Yeung, Chi Ho; Medo, Matúš; Zhang, Yi-Cheng

2015-07-01

Recommender systems daily influence our decisions on the Internet. While considerable attention has been given to issues such as recommendation accuracy and user privacy, the long-term mutual feedback between a recommender system and the decisions of its users has been neglected so far. We propose here a model of network evolution which allows us to study the complex dynamics induced by this feedback, including the hysteresis effect which is typical for systems with non-linear dynamics. Despite the popular belief that recommendation helps users to discover new things, we find that the long-term use of recommendation can contribute to the rise of extremely popular items and thus ultimately narrow the user choice. These results are supported by measurements of the time evolution of item popularity inequality in real systems. We show that this adverse effect of recommendation can be tamed by sacrificing part of short-term recommendation accuracy.

Recommender systems for location-based social networks

CERN Document Server

Symeonidis, Panagiotis; Manolopoulos, Yannis

2014-01-01

Online social networks collect information from users' social contacts and their daily interactions (co-tagging of photos, co-rating of products etc.) to provide them with recommendations of new products or friends. Lately, technological progressions in mobile devices (i.e. smart phones) enabled the incorporation of geo-location data in the traditional web-based online social networks, bringing the new era of Social and Mobile Web. The goal of this book is to bring together important research in a new family of recommender systems aimed at serving Location-based Social Networks (LBSNs). The chapters introduce a wide variety of recent approaches, from the most basic to the state-of-the-art, for providing recommendations in LBSNs. The book is organized into three parts. Part 1 provides introductory material on recommender systems, online social networks and LBSNs. Part 2 presents a wide variety of recommendation algorithms, ranging from basic to cutting edge, as well as a comparison of the characteristics of t...

A Comprehensive Review of the Literature Supporting Recommendations From the Canadian Diabetes Association for the Use of a Plant-Based Diet for Management of Type 2 Diabetes.

Science.gov (United States)

Rinaldi, Sylvia; Campbell, Emily E; Fournier, John; O'Connor, Colleen; Madill, Janet

2016-10-01

Type 2 diabetes mellitus is considered one of the fastest growing diseases in Canada, representing a serious public health concern. Thus, clinicians have begun targeting modifiable risk factors to manage type 2 diabetes, including dietary patterns such as a plant-based diets (PBDs). The Canadian Diabetes Association has included PBDs among the recommended dietary patterns to be used in medical nutrition therapy for persons with type 2 diabetes. To support knowledge translation, this review summarizes the current literature relating to PBDs and the prevalence of type 2 diabetes, its clinical applications and its acceptability in the management of type 2 diabetes as well as its application in community settings. This comprehensive review seeks to close the literature gap by providing background and rationale to support the use of PBDs as medical nutrition therapy. Within this review is support from large observational studies, which have shown that PBDs were associated with lower prevalence of type 2 diabetes. As well, intervention studies have shown that PBDs were just as effective, if not more effective, than other diabetes diets in improving body weight, cardiovascular risk factors, insulin sensitivity, glycated hemoglobin levels, oxidative stress markers and renovascular markers. Furthermore, patient acceptability was comparable to other diabetes diets, and PBDs reduced the need for diabetes medications. Diabetes education centres in Canada could improve patients' perceptions of PBDs by developing PBD-focused education and support as well as providing individualized counselling sessions addressing barriers to change. The development of more standardized and user-friendly PBD practice guidelines could overcome the disparity in recommendations and, thereby, increase how frequently practitioners recommend PBDs. Based on current published research, PBDs lend support in the management of type 2 diabetes. Crown Copyright © 2016. Published by Elsevier Inc. All rights

Cryogenic structural material and design of support structures for the Large Helical Device

International Nuclear Information System (INIS)

Nishimura, Arata; Imagawa, Shinsaku; Tamura, Hitoshi

1997-01-01

This paper describes a short history of material selection for the cryogenic support structures for the Large Helical Device (LHD) which has superconducting coils. Since the support structures are cooled down to 4.4 K together with the coils, SUS 316 was chosen because of its stable austenitic phase, sufficient mechanical properties at cryogenic temperature and good weldability. Also, outlines of the design and fabrication processes of the support structures are summarized. On the design of the support structures, a deformation analysis was carried out to maintain the proper magnetic field during operation. Afterwards, a stress analysis was performed. During machining and assembling, tolerance was noticed to keep coil positions accurate. Special welding grooves and fabrication processes were considered and achieved successfully. Finally, a cryogenic supporting post which sustains the cryogenic structures and superconducting coils is presented. CFRP was used in this specially developed supporting post to reduce the heat conduction from ambient 300 K structures. (author)

Development of materials to support parents whose babies cry excessively: findings and health service implications.

Science.gov (United States)

Long, Jaqui; Powell, Charlotte; Bamber, Deborah; Garratt, Rosemary; Brown, Jayne; Dyson, Sue; James-Roberts, Ian St

2018-01-10

Aim To develop evidence-based materials which provide information and support for parents who are concerned about their baby's excessive crying. As well as meeting these parents' needs, the aim was to develop a package of materials suitable for use by the UK National Health Service (NHS). Parents report that around 20% of infants in Western countries cry excessively without an apparent reason during the first four months of age. Traditionally, research has focused on the crying and its causes. However, evidence is growing that how parents evaluate and respond to the crying needs to receive equal attention. This focus encompasses parental resources, vulnerabilities, well-being and mental health. At present, the UK NHS lacks a set of routine provisions to support parents who are concerned about their baby's excessive crying. The rationales, methods and findings from a study developing materials for this purpose are reported. Following a literature review, 20 parents whose babies previously cried excessively took part in focus groups or interviews. They provided reports on their experiences and the supports they would have liked when their baby was crying excessively. In addition, they identified their preferred delivery methods and devices for accessing information and rated four example support packages identified by the literature review. Findings During the period their baby cried excessively, most parents visited a health service professional and most considered these direct contacts to have provided helpful information and support. Websites were similarly popular. Telephones and tablets were the preferred means of accessing online information. Groups to meet other parents were considered an important additional resource by all the parents. Three package elements - a Surviving Crying website, a printed version of the website and a programme of Cognitive Behaviour Therapy-based support sessions delivered to parents by a qualified practitioner, were developed for

An improved recommended algorithm for network structure based on two partial graphs

Directory of Open Access Journals (Sweden)

Deng Song

2017-08-01

Full Text Available In this thesis,we introduce an improved algorithm based on network structure.Based on the standard material diffusion algorithm,considering the influence of the user's score on the recommendation,the adjustment factor of the initial resource allocation vector and the resource transfer matrix in the recommendation algorithm is improved.Using the practical data set from GroupLens webite to evaluate the performance of the proposed algorithm,we performed a series of experiments.The experimental results reveal that it can yield better recommendation accuracy and has higher hitting rate than collaborative filtering,network-based inference.It can solve the problem of cold start and scalability in the standard material diffusion algorithm.And it also can make the recommendation results diversified.

Film of lignocellulosic carbon material for self-supporting electrodes in electric double-layer capacitors

Directory of Open Access Journals (Sweden)

Tsubasa Funabashi

2013-09-01

Full Text Available A novel thin, wood-based carbon material with heterogeneous pores, film of lignocellulosic carbon material (FLCM, was successfully fabricated by carbonizing softwood samples of Picea jezoensis (Jezo spruce. Simultaneous increase in the specific surface area of FLCM and its affinity for electrolyte solvents in an electric double-layer capacitor (EDLC were achieved by the vacuum ultraviolet/ozone (VUV/O3 treatment. This treatment increased the specific surface area of FLCM by 50% over that of original FLCM. The results obtained in this study confirmed that FLCM is an appropriate self-supporting EDLC electrode material without any warps and cracks.

Support Operators Method for the Diffusion Equation in Multiple Materials

Energy Technology Data Exchange (ETDEWEB)

Winters, Andrew R. [Los Alamos National Laboratory; Shashkov, Mikhail J. [Los Alamos National Laboratory

2012-08-14

A second-order finite difference scheme for the solution of the diffusion equation on non-uniform meshes is implemented. The method allows the heat conductivity to be discontinuous. The algorithm is formulated on a one dimensional mesh and is derived using the support operators method. A key component of the derivation is that the discrete analog of the flux operator is constructed to be the negative adjoint of the discrete divergence, in an inner product that is a discrete analog of the continuum inner product. The resultant discrete operators in the fully discretized diffusion equation are symmetric and positive definite. The algorithm is generalized to operate on meshes with cells which have mixed material properties. A mechanism to recover intermediate temperature values in mixed cells using a limited linear reconstruction is introduced. The implementation of the algorithm is verified and the linear reconstruction mechanism is compared to previous results for obtaining new material temperatures.

Data Mining Methods for Recommender Systems

Science.gov (United States)

Amatriain, Xavier; Jaimes*, Alejandro; Oliver, Nuria; Pujol, Josep M.

In this chapter, we give an overview of the main Data Mining techniques used in the context of Recommender Systems. We first describe common preprocessing methods such as sampling or dimensionality reduction. Next, we review the most important classification techniques, including Bayesian Networks and Support Vector Machines. We describe the k-means clustering algorithm and discuss several alternatives. We also present association rules and related algorithms for an efficient training process. In addition to introducing these techniques, we survey their uses in Recommender Systems and present cases where they have been successfully applied.

Materials support for HITAF

International Nuclear Information System (INIS)

Breder, K.; Tennery, V.J.

1994-01-01

The purpose of this project is to compare structural ceramic materials proposed for use in the air heater of a coal fired high temperature advanced furnace (HITAF) for power generation. The work will provide necessary initial strength and statistical material parameters for design of a prototype system. Two teams are currently funded by Pittsburgh Energy Technology Center (PETC) under the Combustion 2000 program to develop such a system. One team is led by the United Technologies Research Corporation, and consists of UTC Turbo Power and Marine Division, Bechtel, Oak Ridge National Laboratory (ORNL) and a Joint Venture of Physical Sciences Inc. (PSI) Technologies, Reaction Engineering International (REI) and University of North Dakota Energy and Environmental Research Center (UNDERERC); the other team is led by Foster Wheeler Development Corporation, and members are AiResearch Division of AlliedSignal Aerospace Systems ampersand Equipment, Research Cottrell, TRW, General Electric and Bechtel

Recommendations for a Software Quality Assurance Plan for the CMR Facility at LANL

International Nuclear Information System (INIS)

Adams, K.; Matthews, S. D.; McQueen, M. A.

1998-01-01

The Nuclear Materials Technology (NMT) organizations 1 and 3 within the Chemical and Metallurgical Research (CMR) facility at the Los Alamos National Laboratory are working to achieve Waste Isolation Pilot Plant (WIPP) certification to enable them to transport their TRU waste to WIPP. This document is intended to provide not only recommendations to address the necessary software quality assurance activities to enable the NMT-1 and NMT-3 organizations to be WIPP compliant but is also meant to provide a template for the final Software Quality Assurance Plan (SQAP). This document specifically addresses software quality assurance for all software used in support of waste characterization and analysis. Since NMT-1 and NMT-3 currently have several operational software products that are used for waste characterization and analysis, these software quality assurance recommendations apply to the operations, maintenance and retirement of the software and the creation and development of any new software required for waste characterization and analyses

Supporting Student Learning in Computer Science Education via the Adaptive Learning Environment ALMA

Directory of Open Access Journals (Sweden)

Alexandra Gasparinatou

2015-10-01

Full Text Available This study presents the ALMA environment (Adaptive Learning Models from texts and Activities. ALMA supports the processes of learning and assessment via: (1 texts differing in local and global cohesion for students with low, medium, and high background knowledge; (2 activities corresponding to different levels of comprehension which prompt the student to practically implement different text-reading strategies, with the recommended activity sequence adapted to the student’s learning style; (3 an overall framework for informing, guiding, and supporting students in performing the activities; and; (4 individualized support and guidance according to student specific characteristics. ALMA also, supports students in distance learning or in blended learning in which students are submitted to face-to-face learning supported by computer technology. The adaptive techniques provided via ALMA are: (a adaptive presentation and (b adaptive navigation. Digital learning material, in accordance with the text comprehension model described by Kintsch, was introduced into the ALMA environment. This material can be exploited in either distance or blended learning.

A review of recommendations for sequencing receptive and expressive language instruction.

Science.gov (United States)

Petursdottir, Anna Ingeborg; Carr, James E

2011-01-01

We review recommendations for sequencing instruction in receptive and expressive language objectives in early and intensive behavioral intervention (EIBI) programs. Several books recommend completing receptive protocols before introducing corresponding expressive protocols. However, this recommendation has little empirical support, and some evidence exists that the reverse sequence may be more efficient. Alternative recommendations include teaching receptive and expressive skills simultaneously (M. L. Sundberg & Partington, 1998) and building learning histories that lead to acquisition of receptive and expressive skills without direct instruction (Greer & Ross, 2008). Empirical support for these recommendations also is limited. Future research should assess the relative efficiency of receptive-before-expressive, expressive-before-receptive, and simultaneous training with children who have diagnoses of autism spectrum disorders. In addition, further evaluation is needed of the potential benefits of multiple-exemplar training and other variables that may influence the efficiency of receptive and expressive instruction.

Using the Grade Approach to Support the Development of Recommendations for Public Health Interventions in Radiation Emergencies

International Nuclear Information System (INIS)

Carr, Z.; Clarke, M.; Akl, E.A.; Schneider, R.; Murith, C.; Li, C.; Parrish-Sprowl, J.; Stenke, L.; Cui-Ping, L.; Bertrand, S.; Miller, C.

2016-01-01

The World Health Organization (WHO) guideline development policy requires that WHO guidelines be developed in a manner that is transparent and based on all available evidences, which must be synthesised and formally assessed for quality. To fulfil this requirement, the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach of rating quality of evidence and grading strength of recommendations was applied when developing the WHO recommendations on public health interventions in radiation emergencies. The guideline development group (GDG) formulated 10 PICO (P: population; I: intervention; C: comparator; O: outcomes) questions to guide the development of recommendations on response interventions during the early/intermediate and late emergency phases and on risk communications for mitigating psycho-social impact of radiation emergencies. For each PICO question, an extensive evidence search and systematic review was conducted. The GDG then formulated the recommendations using the evidence to recommendation (E-2-R) decision-making matrix and evaluated the strength of each recommendation. (authors)

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement - Part III: Material Property Characterization, Analysis, and Test Methods

Science.gov (United States)

Gates, Thomas S.; Johnson, Theodore F.; Whitley, Karen S.

2005-01-01

The objective of this report is to contribute to the independent assessment of the Space Shuttle External Tank Foam Material. This report specifically addresses material modeling, characterization testing, data reduction methods, and data pedigree. A brief description of the External Tank foam materials, locations, and standard failure modes is provided to develop suitable background information. A review of mechanics based analysis methods from the open literature is used to provide an assessment of the state-of-the-art in material modeling of closed cell foams. Further, this report assesses the existing material property database and investigates sources of material property variability. The report presents identified deficiencies in testing methods and procedures, recommendations for additional testing as required, identification of near-term improvements that should be pursued, and long-term capabilities or enhancements that should be developed.

May I Suggest? Comparing Three PLE Recommender Strategies

Directory of Open Access Journals (Sweden)

Felix Mödritscher

2011-11-01

Full Text Available Personal learning environment (PLE solutions aim at empowering learners to design (ICT and web-based environments for their learning activities, mashingup content and people and apps for different learning contexts. Widely used in other application areas, recommender systems can be very useful for supporting learners in their PLE-based activities, to help discover relevant content, peers sharing similar learning interests or experts on a specific topic. In this paper we examine the utilization of recommender technology for PLEs. However, being confronted by a variety of educational contexts we present three strategies for providing PLE recommendations to learners. Consequently, we compare these recommender strategies by discussing their strengths and weaknesses in general.

Requirements for Semantic Educational Recommender Systems in Formal E-Learning Scenarios

OpenAIRE

Jesus G. Boticario; Olga C. Santos

2011-01-01

This paper analyzes how recommender systems can be applied to current e-learning systems to guide learners in personalized inclusive e-learning scenarios. Recommendations can be used to overcome current limitations of learning management systems in providing personalization and accessibility features. Recommenders can take advantage of standards-based solutions to provide inclusive support. To this end we have identified the need for developing semantic educational recommender systems, which ...

A Fine-Grained API Link Prediction Approach Supporting CMDA Mashup Recommendation

Science.gov (United States)

Zhang, J.; Bao, Q.; Lee, T. J.; Ramachandran, R.; Lee, S.; Pan, L.; Gatlin, P. N.; Maskey, M.

2017-12-01

Service (API) discovery and recommendation is key to the wide spread of service oriented architecture and service oriented software engineering. Service recommendation typically relies on service linkage prediction calculated by the semantic distances (or similarities) among services based on their collection of inherent attributes. Given a specific context (mashup goal), however, different attributes may contribute differently to a service linkage. In this work, instead of training a model for all attributes as a whole, a novel approach is presented to simultaneously train separate models for individual attributes. Our contributions are summarized in three-fold. First is that we have developed a scalable attribute-level data model, featuring scalability and extensibility. We have extended Multiplicative Attribute Graph (MAG) model to represent node profiles featuring rich categorical attributes, while relaxing its constraint of requiring a priori knowledge of predefined attributes. LDA is leveraged to dynamically identify attributes based on attribute modeling, and multiple Gaussian fit is applied to find global optimal values. The second contribution is that we have seamlessly integrated the latent relationships between API attributes as well as observed network structure based on historical API usage data. Such a layered information model enables us to predict the probability of a link between two APIs based on their attribute link affinities carrying a variety of information including meta data, semantic data, historical usage data, as well as crowdsourcing user comments and annotations. The third contribution is that we have developed a finegrained context-aware mashup-API recommendation technique. On top of individual models trained for separate attributes, a dedicated layer is trained to represent the latent attribute distribution regarding mashup purpose, i.e., sensitivity of attributes to context. Thus, given the description of an intended mashup, the

Agricultural Production. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed to deal with…

Evaluating the Effectiveness of Physlet-Based Materials in Supporting Conceptual Learning About Electricity

Science.gov (United States)

Ülen, Simon; Gerlič, Ivan; Slavinec, Mitja; Repnik, Robert

2017-04-01

To provide a good understanding of many abstract concepts in the field of electricity above that of their students is often a major challenge for secondary school teachers. Many educational researchers promote conceptual learning as a teaching approach that can help teachers to achieve this goal. In this paper, we present Physlet-based materials for supporting conceptual learning about electricity. To conduct research into the effectiveness of these materials, we designed two different physics courses: one group of students, the experimental group, was taught using Physlet-based materials and the second group of students, the control group, was taught using expository instruction without using Physlets. After completion of the teaching, we assessed students' thinking skills and analysed the materials with an independent t test, multiple regression analyses and one-way analysis of covariance. The test scores were significantly higher in the experimental group than in the control group ( p < 0.05). The results of this study confirmed the effectiveness of conceptual learning about electricity with the help of Physlet-based materials.

Demonstration of Super Cooled Ice as a Phase Change Material Heat Sink for Portable Life Support Systems

Science.gov (United States)

Leimkuehler, Thomas O.; Bue, Grant C.

2009-01-01

A phase change material (PCM) heat sink using super cooled ice as a nontoxic, nonflammable PCM is being developed. The latent heat of fusion for water is approximately 70% larger than most paraffin waxes, which can provide significant mass savings. Further mass reduction is accomplished by super cooling the ice significantly below its freezing temperature for additional sensible heat storage. Expansion and contraction of the water as it freezes and melts is accommodated with the use of flexible bag and foam materials. A demonstrator unit has been designed, built, and tested to demonstrate proof of concept. Both testing and modeling results are presented along with recommendations for further development of this technology.

77 FR 10535 - Final Guidances for Industry Describing Product-Specific Bioequivalence Recommendations...

Science.gov (United States)

2012-02-22

... recommendations provide product-specific guidance on the design of BE studies to support abbreviated new drug... the process that would be used to make product-specific BE recommendations available to the public on... ``Bioequivalence Recommendations for Specific Products,'' which explained the process that would be used to make...

Challenges while Updating Planning Parameters of an ERP System and How a Simulation-Based Support System Can Support Material Planners

Directory of Open Access Journals (Sweden)

Ulrike Stumvoll

2016-01-01

Full Text Available In an Enterprise Resource Planning (ERP system, production planning is influenced by a variety of parameters. Previous investigations show that setting parameter values is highly relevant to a company’s target system. Parameter settings should be checked and adjusted, e.g., after a change in environmental factors, by material planners. In practice, updating the parameters is difficult due to several reasons. This paper presents a simulation-based decision support system, which helps material planners in all stages of decision-making processes. It will present the system prototype’s user interface and the results of applying the system to a case study.

Development and evaluation of measurement devices used to support testing of radioactive material transportation packages

International Nuclear Information System (INIS)

Uncapher, W.L.; Ammerman, D.J.; Stenberg, D.R.; Bronowski, D.R.; Arviso, M.

1992-01-01

Radioactive material package designers use structural testing to verify and demonstrate package performance. A major part of evaluating structural response is the collection of instrumentation measurement data. Sandia National Laboratories (SNL) has an ongoing program to develop and evaluate measurement devices to support testing of radioactive material packages. Measurement devices developed in support of this activity include evaluation channels, ruggedly constructed linear variable differential transformers, and piezoresistive accelerometers with enhanced measurement capabilities. In addition to developing measurement devices, a method has been derived to evaluate accelerometers and strain gages for measurement repeatability, ruggedness, and manufacturers' calibration data under both laboratory and field conditions. The developed measurement devices and evaluation technique will be discussed and the results of the evaluation will be presented

Farm Management and Leadership. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in farm management and leadership: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with farm management. SMAT materials can…

TDCCREC: AN EFFICIENT AND SCALABLE WEB-BASED RECOMMENDATION SYSTEM

Directory of Open Access Journals (Sweden)

K.Latha

2010-10-01

Full Text Available Web browsers are provided with complex information space where the volume of information available to them is huge. There comes the Recommender system which effectively recommends web pages that are related to the current webpage, to provide the user with further customized reading material. To enhance the performance of the recommender systems, we include an elegant proposed web based recommendation system; Truth Discovery based Content and Collaborative RECommender (TDCCREC which is capable of addressing scalability. Existing approaches such as Learning automata deals with usage and navigational patterns of users. On the other hand, Weighted Association Rule is applied for recommending web pages by assigning weights to each page in all the transactions. Both of them have their own disadvantages. The websites recommended by the search engines have no guarantee for information correctness and often delivers conflicting information. To solve them, content based filtering and collaborative filtering techniques are introduced for recommending web pages to the active user along with the trustworthiness of the website and confidence of facts which outperforms the existing methods. Our results show how the proposed recommender system performs better in predicting the next request of web users.

Radiation effects on materials in high-radiation environments

International Nuclear Information System (INIS)

Weber, W.J.; Mansur, L.K.; Clinard, F.W. Jr.; Parkin, D.M.

1991-01-01

A workshop on Radiation Effects on Materials in High-Radiation Environments was held in Salt Lake City, Utah (USA) from August 13 to 15, 1990 under the auspices of the Division of Materials Sciences, Office of Basic Energy Sciences, US Department of Energy. The workshop focused on ceramics, alloys, and intermetallics and covered research needs and capabilities, recent experimental data, theory, and computer simulations. It was concluded that there is clearly a continuing scientific and technological need for fundamental knowledge on the underlying causes of radiation-induced property changes in materials. Furthermore, the success of many current and emerging nuclear-related technologies critically depend on renewed support for basic radiation-effects research, irradiation facilities, and training of scientists. The highlights of the workshop are reviewed and specific recommendations are made regarding research needs. (orig.)

Development and validation of an exercise performance support system for people with lower extremity impairment.

Science.gov (United States)

Minor, M A; Reid, J C; Griffin, J Z; Pittman, C B; Patrick, T B; Cutts, J H

1998-02-01

To identify innovative strategies to support appropriate, self-directed exercise that increase physical activity levels of people with arthritis. This article reports on one interactive, multimedia exercise performance support system (PSS) for people with lower extremity impairments in strength or flexibility. An interdisciplinary team developed the PSS using self-report of lower extremity musculoskeletal impairments (flexibility and strength) to produce an individualized exercise program with video and print educational materials. Initial evaluation has investigated the validity and reliability of program assessments and recommendations. PSS self-report and professional assessments were similar, with more impairments indicated by self-report. PSS exercise recommendations were similar to those made by 3 expert physical therapists using the same exercise data base. Results of PSS impairment assessments were stable over a 1-week period. PSS exercise recommendations appear to be reliable and a valid reflection of current exercise knowledge in rheumatology. Furthermore, users were able to complete the computer-based program with minimal assistance and reported it to be enjoyable and informative.

Recent developments in affective recommender systems

Science.gov (United States)

Katarya, Rahul; Verma, Om Prakash

2016-11-01

Recommender systems (RSs) are playing a significant role since 1990s as they provide relevant, personalized information to the users over the internet. Lots of work have been done in information filtering, utilization, and application related to RS. However, an important area recently draws our attention which is affective recommender system. Affective recommender system (ARS) is latest trending area of research, as publication in this domain are few and recently published. ARS is associated with human behaviour, human factors, mood, senses, emotions, facial expressions, body gesture and physiological with human-computer interaction (HCI). Due to this assortment and various interests, more explanation is required, as it is in premature phase and growing as compared to other fields. So we have done literature review (LR) in the affective recommender systems by doing classification, incorporate reputed articles published from the year 2003 to February 2016. We include articles which highlight, analyse, and perform a study on affective recommender systems. This article categorizes, synthesizes, and discusses the research and development in ARS. We have classified and managed ARS papers according to different perspectives: research gaps, nature, algorithm or method adopted, datasets, the platform on executed, types of information and evaluation techniques applied. The researchers and professionals will positively support this survey article for understanding the current position, research in affective recommender systems and will guide future trends, opportunity and research focus in ARS.

Providing Personalized Services to Users in a Recommender System

Science.gov (United States)

Oduwobi, Olukunle; Ojokoh, Bolanle Adefowoke

2015-01-01

Instructors recommend learning materials to a class of students not minding the learning ability and reading habit of each student. Learners are finding it problematic to make a decision about which available learning materials best meet their situation and will be beneficial to their course of study. In order to address this challenge, a new…

Effect of a clinical decision support system on adherence to a lower tidal volume mechanical ventilation strategy

NARCIS (Netherlands)

Eslami, Saeid; de Keizer, Nicolette F.; Abu-Hanna, Ameen; de Jonge, Evert; Schultz, Marcus J.

2009-01-01

PURPOSE: The purpose of the study was to measure the effect of a computerized decision support system (CDSS) on adherence to tidal volume (V(T)) recommendations. MATERIALS AND METHODS: We performed a prospective before-after evaluation study on applied V(T) to examine the impact of a CDSS on

Tanks 18 And 19-F Structural Flowable Grout Fill Material Evaluation And Recommendations

International Nuclear Information System (INIS)

Stefanko, D.; Langton, C.

2011-01-01

Cementitious grout will be used to close Tanks 18-F and 19-F. The functions of the grout are to: (1) physically stabilize the final landfill by filling the empty volume in the tanks with a non compressible material; (2) provide a barrier for inadvertent intrusion into the tank; (3) reduce contaminant mobility by (a) limiting the hydraulic conductivity of the closed tank and (b) reducing contact between the residual waste and infiltrating water; and (4) providing an alkaline, chemically reducing environment in the closed tank to control speciation and solubility of selected radionuclides. The objective of this work was to identify a single (all-in-one) grout to stabilize and isolate the residual radionuclides in the tank, provide structural stability of the closed tank and serve as an inadvertent intruder barrier. This work was requested by V. A. Chander, High Level Waste (HLW) Tank Engineering, in HLW-TTR-2011-008. The complete task scope is provided in the Task Technical and QA Plan, SRNL-RP-2011-00587 Revision 0. The specific objectives of this task were to: (1) Identify new admixtures and dosages for formulating a zero bleed flowable tank fill material selected by HLW Tank Closure Project personnel based on earlier tank fill studies performed in 2007. The chemical admixtures used for adjusting the flow properties needed to be updated because the original admixture products are no longer available. Also, the sources of cement and fly ash have changed, and Portland cements currently available contain up to 5 wt. % limestone (calcium carbonate). (2) Prepare and evaluate the placement, compressive strength, and thermal properties of the selected formulation with new admixture dosages. (3) Identify opportunities for improving the mix selected by HLW Closure Project personnel and prepare and evaluate two potentially improved zero bleed flowable fill design concepts; one based on the reactor fill grout and the other based on a shrinkage compensating flowable fill mix

TANKS 18 AND 19-F STRUCTURAL FLOWABLE GROUT FILL MATERIAL EVALUATION AND RECOMMENDATIONS

Energy Technology Data Exchange (ETDEWEB)

Stefanko, D.; Langton, C.

2011-11-01

Cementitious grout will be used to close Tanks 18-F and 19-F. The functions of the grout are to: (1) physically stabilize the final landfill by filling the empty volume in the tanks with a non compressible material; (2) provide a barrier for inadvertent intrusion into the tank; (3) reduce contaminant mobility by (a) limiting the hydraulic conductivity of the closed tank and (b) reducing contact between the residual waste and infiltrating water; and (4) providing an alkaline, chemically reducing environment in the closed tank to control speciation and solubility of selected radionuclides. The objective of this work was to identify a single (all-in-one) grout to stabilize and isolate the residual radionuclides in the tank, provide structural stability of the closed tank and serve as an inadvertent intruder barrier. This work was requested by V. A. Chander, High Level Waste (HLW) Tank Engineering, in HLW-TTR-2011-008. The complete task scope is provided in the Task Technical and QA Plan, SRNL-RP-2011-00587 Revision 0. The specific objectives of this task were to: (1) Identify new admixtures and dosages for formulating a zero bleed flowable tank fill material selected by HLW Tank Closure Project personnel based on earlier tank fill studies performed in 2007. The chemical admixtures used for adjusting the flow properties needed to be updated because the original admixture products are no longer available. Also, the sources of cement and fly ash have changed, and Portland cements currently available contain up to 5 wt. % limestone (calcium carbonate). (2) Prepare and evaluate the placement, compressive strength, and thermal properties of the selected formulation with new admixture dosages. (3) Identify opportunities for improving the mix selected by HLW Closure Project personnel and prepare and evaluate two potentially improved zero bleed flowable fill design concepts; one based on the reactor fill grout and the other based on a shrinkage compensating flowable fill mix

OECD Policy Recommendations on Security for Biological Materials

International Nuclear Information System (INIS)

Radisch, J.

2007-01-01

Biomedical innovations derived from research on pathogenic micro-organisms promise astounding health and economic benefits. Some such biological resources employed in the RandD for diagnostic kits, vaccines and therapeutics, however, possess capacity for dual-use; they may be misused to develop biological weapons. Research facilities entrusted with possession of such dual-use materials have a responsibility to comply with biosecurity measures that are designed to prevent loss or theft and thereby reduce the probability of a bioterrorist attack. The OECD has provided a forum for its Member countries to engage in a dialogue of international co-operation with a view to produce policies that achieve a research environment fortified by biosecurity measures and capable of producing health innovations. In 2007, the OECD developed a risk assessment framework and risk management principles for Biological Resource Centres. Ongoing policy work at the OECD will look to design biosecurity guidelines appropriate to a broader range of facilities in possession of dual-use materials, such as university and industrial laboratories.(author)

Degradation of simazine from aqueous solutions by diatomite-supported nanosized zero-valent iron composite materials.

Science.gov (United States)

Sun, Zhiming; Zheng, Shuilin; Ayoko, Godwin A; Frost, Ray L; Xi, Yunfei

2013-12-15

A novel composite material based on deposition of nanosized zero-valent iron (nZVI) particles on acid-leached diatomite was synthesised for the removal of a chlorinated contaminant in water. The nZVI/diatomite composites were characterised by X-ray diffraction, scanning electron microscopy, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Compared with the pure nZVI particles, better dispersion of nZVI particles on the surface or inside the pores of diatom shells was observed. The herbicide simazine was selected as the model chlorinated contaminant and the removal efficiency by nZVI/diatomite composite was compared with that of the pristine nZVI and commercial iron powder. It was found that the diatomite supported nZVI composite material prepared by centrifugation exhibits relatively better efficient activity in decomposition of simazine than commercial Fe, lab synthesised nZVI and composite material prepared via rotary evaporation, and the optimum experimental conditions were obtained based on a series of batch experiments. This study on immobilising nZVI particles onto diatomite opens a new avenue for the practical application of nZVI and the diatomite-supported nanosized zero-valent iron composite materials have potential applications in environmental remediation. Copyright © 2013 Elsevier B.V. All rights reserved.

Recommendation 93-5 Implementation Plan

International Nuclear Information System (INIS)

1994-01-01

On July 19, 1993, the Defense Nuclear Facilities Safety Board (DNFSB) provided to the Secretary of Energy its Recommendation 93-5, which commented on the Hanford Tank Waste Characterization effort. Recommendation 93-5 highlighted the need to accelerate the characterization of the Hanford Site tank wastes to expedite the resolution of identified tank safety issues, and to provide timely design data in support of activities addressing the disposal of the tank wastes. The Department of Energy (DOE) and its prime contractor, Westinghouse Hanford Company (WHC), are in full agreement with the content of Recommendation 93-5 and have prepared this Implementation Plan to document those actions that have been or will be taken to meet Recommendation 93-5. The new Characterization Strategy embodied by this Plan acknowledges that waste distribution within a tank is the critical unknown with respect to successfully characterizing the tank for any Tank Waste Remediation Systems (TWRS) programmatic need. The new strategy has been incorporated into the following seven task: (1) strengthen technical management; (2) accelerate safety related characterization; (3) improve the quality and quantity of sampling (4) streamline tank access; (5) improve the quality and quantity of analyses; (6) improve data management; and (7) change control

A Hybrid Recommender System Based on User-Recommender Interaction

OpenAIRE

Zhang, Heng-Ru; Min, Fan; He, Xu; Xu, Yuan-Yuan

2015-01-01

Recommender systems are used to make recommendations about products, information, or services for users. Most existing recommender systems implicitly assume one particular type of user behavior. However, they seldom consider user-recommender interactive scenarios in real-world environments. In this paper, we propose a hybrid recommender system based on user-recommender interaction and evaluate its performance with recall and diversity metrics. First, we define the user-recommender interaction...

X-ray, neutron, and electron scattering. Report of a materials sciences workshop

International Nuclear Information System (INIS)

1977-08-01

The ERDA Workshop on X-ray, Neutron, and Electron Scattering to assess needs and establish priorities for energy-related basic research on materials. The general goals of the Workshop were: (1) to review various energy technologies where x-ray, neutron, and electron scattering techniques might make significant contributions, (2) to identify present and future materials problems in the energy technologies and translate these problems into requirements for basic research by x-ray, neutron, and electron scattering techniques, (3) to recommend research areas utilizing these three scattering techniques that should be supported by the DPR Materials Sciences Program, and (4) to assign priorities to these research areas

Automated recommendation for cervical cancer screening and surveillance.

Science.gov (United States)

Wagholikar, Kavishwar B; MacLaughlin, Kathy L; Casey, Petra M; Kastner, Thomas M; Henry, Michael R; Hankey, Ronald A; Peters, Steve G; Greenes, Robert A; Chute, Christopher G; Liu, Hongfang; Chaudhry, Rajeev

2014-01-01

Because of the complexity of cervical cancer prevention guidelines, clinicians often fail to follow best-practice recommendations. Moreover, existing clinical decision support (CDS) systems generally recommend a cervical cytology every three years for all female patients, which is inappropriate for patients with abnormal findings that require surveillance at shorter intervals. To address this problem, we developed a decision tree-based CDS system that integrates national guidelines to provide comprehensive guidance to clinicians. Validation was performed in several iterations by comparing recommendations generated by the system with those of clinicians for 333 patients. The CDS system extracted relevant patient information from the electronic health record and applied the guideline model with an overall accuracy of 87%. Providers without CDS assistance needed an average of 1 minute 39 seconds to decide on recommendations for management of abnormal findings. Overall, our work demonstrates the feasibility and potential utility of automated recommendation system for cervical cancer screening and surveillance.

Nursing recruitment: relationship between perceived employer image and nursing employees' recommendations.

Science.gov (United States)

Van Hoye, Greet

2008-08-01

This paper is a report of a study to examine the relationship between nursing employees' perceptions of instrumental and symbolic dimensions of employer image on the one hand and their intentions to recommend their organization as an employer and their willingness to testify in their organization's recruitment materials on the other. Previous research suggests that word-of-mouth recommendations by current nursing employees can enhance healthcare organizations' attractiveness as an employer for potential applicants. However, it is not known what motivates employees to provide positive word-of-mouth comments and to endorse their employer in recruitment testimonials. The instrumental-symbolic framework was applied to identify relevant dimensions of perceived employer image that might relate to employee recommendations. A questionnaire was administered in 2006 to 106 nurses and nursing aides from four non-profit nursing homes in Belgium. The response rate was 55%. Overall, nursing employees were more willing to recommend their nursing home to others than to testify in recruitment materials. Both instrumental and symbolic employer image dimensions predicted nursing employees' recommendation intentions. Conversely, willingness to testify was only predicted by symbolic image dimensions. Specifically, the more the nursing employees perceived that their nursing home offers task diversity, offers the possibility to help people and is prestigious, the more they intended to recommend their organization to others. The more they perceived their nursing home as competent, the higher were their recommendation intentions and their willingness to testify in recruitment communication. To increase nursing employees' willingness to recommend their employer to potential applicants, organizations should enhance their perceived employer image.

Committee on Diabetes Mellitus Indices of the Japan Society of Clinical Chemistry-recommended reference measurement procedure and reference materials for glycated albumin determination.

Science.gov (United States)

Takei, Izumi; Hoshino, Tadao; Tominaga, Makoto; Ishibashi, Midori; Kuwa, Katsuhiko; Umemoto, Masao; Tani, Wataru; Okahashi, Mikiko; Yasukawa, Keiko; Kohzuma, Takuji; Sato, Asako

2016-01-01

Glycated albumin is an intermediate glycaemic control marker for which there are several measurement procedures with entirely different reference intervals. We have developed a reference measurement procedure for the purpose of standardizing glycated albumin measurements. The isotope dilution liquid chromatography/tandem mass spectrometry method was developed as a reference measurement procedure for glycated albumin. The stable isotopes of lysine and fructosyl-lysine, which serve as an internal standard, were added to albumin isolated from serum, followed by hydrogenation. After hydrolysis of albumin with hot hydrochloric acid, the liberated lysine and fructosyl-lysine were measured by liquid chromatography/tandem mass spectrometry, and their concentrations were determined from each isotope ratio. The reference materials (JCCRM611) for determining of glycated albumin were prepared from pooled patient blood samples. The isotope dilution-tandem mass spectrometry calibration curve of fructosyl-lysine and lysine showed good linearity (r = 0.999). The inter-assay and intra-assay coefficient of variation values of glycated albumin measurement were 1.2 and 1.4%, respectively. The glycated albumin values of serum in patients with diabetes assessed through the use of this method showed a good relationship with routine measurement procedures (r = 0.997). The relationship of glycated albumin values of the reference material (JCCRM611) between these two methods was the same as the relationship with the patient serum samples. The Committee on Diabetes Mellitus Indices of the Japan Society of Clinical Chemistry recommends the isotope dilution liquid chromatography/tandem mass spectrometry method as a reference measurement procedure, and JCCRM611 as a certified reference material for glycated albumin measurement. In addition, we recommend the traceability system for glycated albumin measurement. © The Author(s) 2015.

Development of supporting system for emergency response to maritime transport accidents involving radioactive material

International Nuclear Information System (INIS)

Odano, N.; Matsuoka, T.; Suzuki, H.

2004-01-01

National Maritime Research Institute has developed a supporting system for emergency response of competent authority to maritime transport accidents involving radioactive material. The supporting system for emergency response has functions of radiation shielding calculation, marine diffusion simulation, air diffusion simulation and radiological impact evaluation to grasp potential hazard of radiation. Loss of shielding performance accident and loss of sealing ability accident were postulated and impact of the accidents was evaluated based on the postulated accident scenario. Procedures for responding to emergency were examined by the present simulation results

Recommended sublimation pressure and enthalpy of benzene

Czech Academy of Sciences Publication Activity Database

Růžička, K.; Fulem, Michal; Červinka, C.

2014-01-01

Roč. 68, Jan (2014), s. 40-47 ISSN 0021-9614 Institutional support: RVO:68378271 Keywords : benzene * vapor pressure * heat capacity * ideal - gas thermodynamic properties * sublimation enthalpy * recommended vapor pressure Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.679, year: 2014

Economics of radioactive material transportation in the light-water reactor nuclear fuel cycle

International Nuclear Information System (INIS)

Dupree, S.A.; O'Malley, L.C.

1980-10-01

This report presents estimates of certain transportation costs, in 1979 dollars, associated with Light-Water Reactor (LWR) once-through and recycle fuel cycles. Shipment of fuel, high-level waste and low-level waste was considered. Costs were estimated for existing or planned transportation systems and for recommended alternate systems, based on the assumption of mature fuel cycles. The annual radioactive material transportation costs required to support a nominal 1000-MW(e) LWR in a once-through cycle in which spent fuel is shipped to terminal storage or disposal were found to be approx. $490,000. Analogous costs for an average reactor operating in a fuel cycle with uranium and plutonim recycle were determined to be approx. $770,000. These results assume that certain recommended design changes will occur in radioactive material shipping systems as a mature fuel cycle evolves

[Policy recommendations based on SWOT analysis for agricultural industrialization of traditional Chinese medicinal materials--a case study of uncariae ramulus cum uncis from Jianhe county in Guizhou province].

Science.gov (United States)

Hu, Yong; Huo, Ke-Yi; Xiang, Hua

2013-09-01

This thesis reviews the historical background of agricultural industrialization, and analyzes the major theories of agricultural industrialization. It also utilizes SWOT analysis method to discuss the industrialization of traditional Chinese medicinal materials in Jianhe county, and finally it puts forward the recommendations for its further development.

Degradation of simazine from aqueous solutions by diatomite-supported nanosized zero-valent iron composite materials

Energy Technology Data Exchange (ETDEWEB)

Sun, Zhiming [School of Chemical and Environmental Engineering, China University of Mining and Technology, Beijing 100083 (China); Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia); Zheng, Shuilin [School of Chemical and Environmental Engineering, China University of Mining and Technology, Beijing 100083 (China); Ayoko, Godwin A.; Frost, Ray L. [Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia); Xi, Yunfei, E-mail: y.xi@qut.edu.au [Chemistry Discipline, Faculty of Science and Technology, Queensland University of Technology, 2 George Street, GPO Box 2434, Brisbane, Queensland 4001 (Australia)

2013-12-15

Graphical abstract: Nanosized zero-valent iron (nZVI) particles were deposited onto acid-leached diatomite through centrifugation or rotary evaporation. The synthesis schematic diagram and morphology of the prepared nZVI/diatomite composites are shown in the illustration. The removal efficiency for herbicide simazine by nZVI/diatomite composites was compared with that of the pristine nZVI and the commercial iron powder. -- Highlights: • Diatomite-supported nanosized zero-valent iron composite was synthesised. • The obtained composites were characterised by XRD, SEM–EDS, TEM and XPS. • The removal efficiency for simazine in water were studied. • The prepared composite showed potential prospects in environmental remediation. -- Abstract: A novel composite material based on deposition of nanosized zero-valent iron (nZVI) particles on acid-leached diatomite was synthesised for the removal of a chlorinated contaminant in water. The nZVI/diatomite composites were characterised by X-ray diffraction, scanning electron microscopy, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Compared with the pure nZVI particles, better dispersion of nZVI particles on the surface or inside the pores of diatom shells was observed. The herbicide simazine was selected as the model chlorinated contaminant and the removal efficiency by nZVI/diatomite composite was compared with that of the pristine nZVI and commercial iron powder. It was found that the diatomite supported nZVI composite material prepared by centrifugation exhibits relatively better efficient activity in decomposition of simazine than commercial Fe, lab synthesised nZVI and composite material prepared via rotary evaporation, and the optimum experimental conditions were obtained based on a series of batch experiments. This study on immobilising nZVI particles onto diatomite opens a new avenue for the practical application of nZVI and the diatomite-supported nanosized zero

Biotemplated Palladium Catalysts Can Be Stabilized on Different Support Materials

KAUST Repository

Yates, Matthew D.; Logan, Bruce E.

2014-01-01

© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Sustainably biotemplated palladium catalysts generated on different carbon-based support materials are examined for durability under electrochemical (oxidative) and mechanical-stress conditions. Biotemplated catalysts on carbon paper under both stresses retain 95% (at 0.6V) of the initial catalytic activity as opposed to 70% for carbon cloth and 60% for graphite. Graphite electrodes retain 95% of initial catalytic activity under a single stress. Using electrodeposited polyaniline (PANI) and polydimethylsiloxane binder increases the current density after the stress tests by 22%, as opposed to a 30% decrease for Nafion. PANI-coated electrodes retain more activity than carbon-paper electrodes under elevated mechanical (94 versus 70%) or increased oxidative (175 versus 62%) stress. Biotemplated catalytic electrodes may be useful alternatives to synthetically produce catalysts for some electrochemical applications. Sustainable electrode fabrication: The biotemplated synthesis of catalytic porous electrodes is a sustainable process and, according to the results of durability tests under electrochemical and mechanical stress, these electrodes (e.g. the Pd/carbon paper electrode shown in the picture) are durable enough to replace catalytic electrodes based on synthetic materials in certain applications.

Biotemplated Palladium Catalysts Can Be Stabilized on Different Support Materials

KAUST Repository

Yates, Matthew D.

2014-07-30

© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Sustainably biotemplated palladium catalysts generated on different carbon-based support materials are examined for durability under electrochemical (oxidative) and mechanical-stress conditions. Biotemplated catalysts on carbon paper under both stresses retain 95% (at 0.6V) of the initial catalytic activity as opposed to 70% for carbon cloth and 60% for graphite. Graphite electrodes retain 95% of initial catalytic activity under a single stress. Using electrodeposited polyaniline (PANI) and polydimethylsiloxane binder increases the current density after the stress tests by 22%, as opposed to a 30% decrease for Nafion. PANI-coated electrodes retain more activity than carbon-paper electrodes under elevated mechanical (94 versus 70%) or increased oxidative (175 versus 62%) stress. Biotemplated catalytic electrodes may be useful alternatives to synthetically produce catalysts for some electrochemical applications. Sustainable electrode fabrication: The biotemplated synthesis of catalytic porous electrodes is a sustainable process and, according to the results of durability tests under electrochemical and mechanical stress, these electrodes (e.g. the Pd/carbon paper electrode shown in the picture) are durable enough to replace catalytic electrodes based on synthetic materials in certain applications.

Agricultural Production. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with agricultural production. SMAT materials…

Industry Research and Recommendations for New Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

2014-05-01

Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

May I suggest? Three PLE recommender strategies in comparison

OpenAIRE

Mödritscher, Felix; Krumay, Barbara; El Helou, Sandy; Gillet, Denis; Nussbaumer, Alexander; Albert, Dietrich; Dahn, Ingo; Ullrich, Carsten

2011-01-01

Personal learning environment (PLE) solutions aim at empowering learners to design (ICT and web-based) environments for their activities in different learning contexts and even for transitions between these contexts. Hereby, recommender systems which are highly successful in other application areas comprise one relevant technology for supporting learners in PLE-based activities. In this paper we examine the utilization of recommender technology for PLEs. However, being confronted by a variety...

Possible implications of draft ICRP recommendations

International Nuclear Information System (INIS)

2003-01-01

The Committee on Radiation Protection and Public Health (CRPPH) of the OECD Nuclear Energy Agency (NEA) has, since its inception, worked to develop and improve international norms in the area of radiological protection of the public, workers and the environment. International radiological protection norms continue to evolve, with significant new steps having been taken by the International Radiological Protection Commission (ICRP). Since the issuance of its 1990 recommendations, which form the basis of the international system of radiological protection, the ICRP has continued to add to them. The sum of these recommendations has become overly complicated and at times incoherent. In 1999 the ICRP therefore began to re-evaluate its recommendations with the aim of consolidation, simplification and clarification. New ICRP recommendations are due to be published in 2005. The CRPPH is contributing to the development of these new recommendations by providing the views of regulators and practitioners from its member countries. This report summarises the views of the CRPPH regarding the conceptual framework that the ICRP has recently proposed as the basis for its forthcoming detailed recommendations. The CRPPH highly appreciates the open stakeholder process that the ICRP has initiated to gather input for the development of new recommendations. This document, which is supported by the NEA Committee on Radiation Protection and Public Health, and by the NEA Radioactive Waste Management Committee, provides detailed suggestions with regard to the proposed ICRP framework. The stakeholder views expressed in this report have been presented to the ICRP at the second NEA/ICRP Forum in April 2003, and have persuaded the ICRP to reintroduce several key concepts into its proposed new system. (author)

From recommendation to action: psychosocial factors influencing physician intention to use Health Technology Assessment (HTA recommendations

Directory of Open Access Journals (Sweden)

Sánchez Emília

2006-03-01

technology assessment into professional practice. Results identify determinant factors that should be considered in the elaboration of strategies to support the implementation of evidence-based practice, with respect to emerging health technologies and modalities of practice. However, it is important to emphasise that behavioural determinants of evidence-based practice vary according to the specific technology considered. Evidence-based implementation of HTA recommendations, as well as other evidence-based practices, should build on a theoretical understanding of the complex forces that shape the practice of healthcare professionals.

Clearance potential of ITER vacuum vessel activated materials

International Nuclear Information System (INIS)

Cepraga, D.G.; Cambi, G.; Frisoni, M.

2002-01-01

To demonstrate fusion's environmental attractiveness over the entire life cycle, a waste analysis is mandatory. The clearance is recommended by IAEA for releasing activated solid materials from regulatory control and for waste management policy. The paper focuses on the approach used to support waste analyses for ITER Generic Site Safety Report. The Material Unconditional Clearance Index of all the materials/zones on the equatorial mid-plane of ITER machine have been evaluated, based on IAEA-TECDOC-855. The Bonami-Nitawl-XSDNRPM sequence of the Scale-4.4a code system (using Vitenea-J library) has been firstly used for radiation transport analyses. Then the Anita-2000 code package is used for the activation calculation. The paper presents also, as an example, an application of the clearance indexes estimation for the ITER vacuum vessel materials. The results of the Anita-2000 have been compared with those obtained using the Fispact-99 activation code. (author)

Life support systems analysis and technical trades for a lunar outpost

Science.gov (United States)

Ferrall, J. F.; Ganapathi, G. B.; Rohatgi, N. K.; Seshan, P. K.

1994-01-01

The NASA/JPL life support systems analysis (LISSA) software tool was used to perform life support system analysis and technology trades for a Lunar Outpost. The life support system was modeled using a chemical process simulation program on a steady-state, one-person, daily basis. Inputs to the LiSSA model include metabolic balance load data, hygiene load data, technology selection, process operational assumptions and mission parameter assumptions. A baseline set of technologies has been used against which comparisons have been made by running twenty-two cases with technology substitutions. System, subsystem, and technology weights and powers are compared for a crew of 4 and missions of 90 and 600 days. By assigning a weight value to power, equivalent system weights are compared. Several less-developed technologies show potential advantages over the baseline. Solid waste treatment technologies show weight and power disadvantages but one could have benefits associated with the reduction of hazardous wastes and very long missions. Technology development towards reducing the weight of resupplies and lighter materials of construction was recommended. It was also recommended that as technologies are funded for development, contractors should be required to generate and report data useful for quantitative technology comparisons.

Farmers as Employers. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication and numeracy skills…

IAEA support of international research and development of materials for sustainable energy applications

International Nuclear Information System (INIS)

Zeman, Andrej; Kaiser, Ralf; Simon, Aliz

2013-01-01

Full-text:The key mandate of the International Atomic Energy Agency (IAEA) is to promote the peaceful application of nuclear science and technology, verification as well as nuclear safety in the world. This includes a number of activities which aim to support the Member States and stimulate international cooperation in order for sustainable development. During the last 35 years, a well-established mechanism called the Coordinated Research Projects (CRP) has been effectively used to stimulate international research and scientific interaction among the Member States, covering various topics in the nuclear science and technology. Besides direct support of, so called coordinated research, the IAEA is also involved in organizing a number of highly specific international conferences and technical meetings which help to provide a broader platform for the specialist and experts in dedicated areas of nuclear science and technology. In view of support for renewable energy and its application, the IAEA organized series of meetings in 2009 (IEA France), 2010 (UQTR Canada) and 2011 (ANL USA) in order to discuss the scientific and technical issues of particular of national research initiatives related to the hydrogen storage and conversion technologies. All selected outputs of the meetings were published in a technical document publication series which are available to all member states. More recent initiatives are focus on the key nuclear techniques which are extremely valuable in research and development of new innovative materials, methods and technologies, characterization and performance testing of functional materials for innovative energy technologies and their application in sustainable energy sources (nuclear and non-nuclear). It is also important to underline that these programmatic activities are an integral part of the IAEA program on the Road to Rio+20: Applying Nuclear Technology for Sustainable Development. The paper summarizes the IAEA actions relevant to the

Private personalized social recommendations in an IPTV system

Science.gov (United States)

Elmisery, Ahmed M.

2014-04-01

In our connected world, recommender systems have become widely known for their ability to provide expert and personalize referrals to end-users in different domains. The rapid growth of social networks and new kinds of systems so called "social recommender systems" are rising, where recommender systems can be utilized to find a suitable content according to end-users' personal preferences. However, preserving end-users' privacy in social recommender systems is a very challenging problem that might prevent end-users from releasing their own data, which detains the accuracy of extracted referrals. In order to gain accurate referrals, social recommender systems should have the ability to preserve the privacy of end-users registered in this system. In this paper, we present a middleware that runs on end-users' Set-top boxes to conceal their profile data when released for generating referrals, such that computation of recommendation proceeds over the concealed data. The proposed middleware is equipped with two concealment protocols to give users a complete control on the privacy level of their profiles. We present an IPTV network scenario and perform a number of different experiments to test the efficiency and accuracy of our protocols. As supported by the experiments, our protocols maintain the recommendations accuracy with acceptable privacy level.

Recommendations for Laboratory Containment and Management of Gene Drive Systems in Arthropods.

Science.gov (United States)

Benedict, Mark Q; Burt, Austin; Capurro, Margareth L; De Barro, Paul; Handler, Alfred M; Hayes, Keith R; Marshall, John M; Tabachnick, Walter J; Adelman, Zach N

2018-01-01

Versatile molecular tools for creating driving transgenes and other invasive genetic factors present regulatory, ethical, and environmental challenges that should be addressed to ensure their safe use. In this article, we discuss driving transgenes and invasive genetic factors that can potentially spread after their introduction into a small proportion of individuals in a population. The potential of invasive genetic factors to increase their number in natural populations presents challenges that require additional safety measures not provided by previous recommendations regarding accidental release of arthropods. In addition to providing physical containment, invasive genetic factors require greater attention to strain management, including their distribution and identity confirmation. In this study, we focus on insects containing such factors with recommendations for investigators who are creating them, institutional biosafety committees charged with ensuring safety, funding agencies providing support, those managing insectaries handling these materials who are responsible for containment, and other persons who will be receiving insects-transgenic or not-from these facilities. We give specific examples of efforts to modify mosquitoes for mosquito-borne disease control, but similar considerations are relevant to other arthropods that are important to human health, the environment, and agriculture.

Recommendation System Based On Association Rules For Distributed E-Learning Management Systems

Science.gov (United States)

Mihai, Gabroveanu

2015-09-01

Traditional Learning Management Systems are installed on a single server where learning materials and user data are kept. To increase its performance, the Learning Management System can be installed on multiple servers; learning materials and user data could be distributed across these servers obtaining a Distributed Learning Management System. In this paper is proposed the prototype of a recommendation system based on association rules for Distributed Learning Management System. Information from LMS databases is analyzed using distributed data mining algorithms in order to extract the association rules. Then the extracted rules are used as inference rules to provide personalized recommendations. The quality of provided recommendations is improved because the rules used to make the inferences are more accurate, since these rules aggregate knowledge from all e-Learning systems included in Distributed Learning Management System.

The Effect of Incorporating Good Learners' Ratings in e-Learning Content-Based Recommender System

Science.gov (United States)

Ghauth, Khairil Imran; Abdullah, Nor Aniza

2011-01-01

One of the anticipated challenges of today's e-learning is to solve the problem of recommending from a large number of learning materials. In this study, we introduce a novel architecture for an e-learning recommender system. More specifically, this paper comprises the following phases i) to propose an e-learning recommender system based on…

Repurposing Existing Material for Performance Support.

Science.gov (United States)

Harvey, Francis A.; Nelson, Adam

1995-01-01

Presents an overview of performance support systems (PSS), describes their role in promoting productivity in agile organizations, and discusses issues related to developing effective performance support using existing orientation, training, or procedural manuals. Topics include strategic principles of agility, and adding value when incorporating…

Pt nanoparticles supported over Ce-Ti-O: the solvothermal and photochemical approaches for the preparation of catalytic materials

International Nuclear Information System (INIS)

Silva, Adrian M. T.; Machado, Bruno F.; Gomes, Helder T.; Figueiredo, Jose L.; Drazic, Goran; Faria, Joaquim L.

2010-01-01

Ce-Ti-O supports with different Ce/Ti molar ratios were synthesized by the solvothermal method using hexadecyltrimethylammonium bromide. Pt nanoparticles were then supported by photochemical deposition. The shape, size, and structure of these materials were analyzed by high-resolution transmission electron microscopy. The single CeO 2 support was also prepared, consisting of agglomerated cubic particles ranging from ∼3 to 8 nm. When titania was combined with ceria, a nanostructured architecture was produced, evidencing the strong influence of Ti in the support structure. Photodeposition of Pt nanoparticles is more efficient on Ce-Ti-O supports than in pristine CeO 2 . Crystalline Pt nanoparticles (mainly of ∼2 to 4 nm) were detected. The catalytic properties of the materials were tested in the selective hydrogenation of cinnamaldehyde to cinnamyl alcohol. It was observed that Pt supported on Ce-Ti-O is more active and selective than Pt on CeO 2 or TiO 2 separately. The catalyst with 40 mol% Ce leads to total conversion of cinnamaldehyde in a few minutes; however, higher selectivity toward the desired product (cinnamyl alcohol) was obtained with higher amounts of Ce (50 mol%).

Synthesis and comparison of the activities of a catalyst supported on two silicate materials

Energy Technology Data Exchange (ETDEWEB)

Vieira, Eduardo G., E-mail: eduardogv5007@gmail.com [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Silva, Rafael O.; Carmo, Devaney R. do [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Junior, Enes F. [Departamento de Fitotecnia, Tecnologia de Alimentos e Sócio Economia, Faculdade de Engenharia de Ilha Solteira, Universidade Estadual Paulista, Ilha Solteira, São Paulo (Brazil); Dias Filho, Newton L., E-mail: nldias@unesc.net [Departamento de Física e Química, Unesp-Univ Estadual Paulista, Av. Brasil, 56-Centro, Caixa Postal 31, CEP 15385-000, Ilha Solteira, São Paulo (Brazil); Universidade do Extremo Sul Catarinense, Av. Universitaria, 1105, CP 3167, CEP 88806-000, Criciúma, SC (Brazil)

2017-04-15

The focus of this work is inspecting the synthesis and comparison of the activities of a catalyst supported on two silicate materials in the epoxidation of 1-octene. The two new catalyst materials were characterized by infrared spectroscopy, elemental analysis, solid-state {sup 29}Si and {sup 13}C nuclear magnetic resonance, scanning electronic microscope (SEM) and analysis of nitrogen. Lastly, the two new catalysts, Silsesq-TCA-[(W(CO){sub 3}I{sub 2}){sub 3}] and Silica-TCA-[W(CO){sub 3}I{sub 2}] were tested as catalysts in reactions of epoxidation of 1-octene and compared with their analogue not supported [W(CO){sub 3}I{sub 2}(thiocarbamide)]. After an extensive literature search, we verified that our work is the first that has reported the immobilization process of [W(CO){sub 3}I{sub 2}(NCCH{sub 3}){sub 2}] on silsesquioxane and silica gel functionalized with propyl-thiocarbamide groups and their applications as catalysts of reactions of catalytic epoxidation of 1-octene. - Highlights: • Immobilization of [W(CO){sub 3}I{sub 2}(NCCH{sub 3}){sub 2}] complex onto mesoporous supports. • Synthesis and characterization of new mesoporous catalysts. • The new catalysts exhibit great catalytic activity in the epoxidation of 1-octene. • Recyclable catalysts with excellent reusability and stability.

Natural penetrating radiation inside silicate dwellings in Chengdu and recommendation on permissible limits for radioactivity of building material made of silicate cinders

International Nuclear Information System (INIS)

Li Guangzao

1984-01-01

This paper reports the results of external exposure rate of penetrating radiation inside silicate dwellings in Chengdu. The average exposure rate was 24.3+-3.5 R/h. It was evidently higher than of red brick dwellings. The average effective equivalent of the population in silicate dwellings was 123.4+-10.4 mrem/y and the average additional dose was 29.5+-12.5 mrem/y. The permissible limits recommended for silicate building material would be 6 pCi/g, 7 pCi/g and 102 pCi/g for 226 Ra, 232 Th and 40 K, respectively. The total activity must fulfill the formula of Csub(Ra)/6 + Csub(Th)/7 + Csub(k)/102 1. Under ordinary condition the exposure rate (10+background) R/h of penetrating radiation from the surface of dry building material might be taken as the permissible limit for dwellings and other public buildings

Multi-agent system for Knowledge-based recommendation of Learning Objects

Directory of Open Access Journals (Sweden)

Paula Andrea RODRÍGUEZ MARÍN

2015-12-01

Full Text Available Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.

Effects of framework design and layering material on fracture strength of implant-supported zirconia-based molar crowns.

Science.gov (United States)

Kamio, Shingo; Komine, Futoshi; Taguchi, Kohei; Iwasaki, Taro; Blatz, Markus B; Matsumura, Hideo

2015-12-01

To evaluate the effects of framework design and layering material on the fracture strength of implant-supported zirconia-based molar crowns. Sixty-six titanium abutments (GingiHue Post) were tightened onto dental implants (Implant Lab Analog). These abutment-implant complexes were randomly divided into three groups (n = 22) according to the design of the zirconia framework (Katana), namely, uniform-thickness (UNI), anatomic (ANA), and supported anatomic (SUP) designs. The specimens in each design group were further divided into two subgroups (n = 11): zirconia-based all-ceramic restorations (ZAC group) and zirconia-based restorations with an indirect composite material (Estenia C&B) layered onto the zirconia framework (ZIC group). All crowns were cemented on implant abutments, after which the specimens were tested for fracture resistance. The data were analyzed with the Kruskal-Wallis test and the Mann-Whitney U-test with the Bonferroni correction (α = 0.05). The following mean fracture strength values (kN) were obtained in UNI design, ANA design, and SUP design, respectively: Group ZAC, 3.78, 6.01, 6.50 and Group ZIC, 3.15, 5.65, 5.83. In both the ZAC and ZIC groups, fracture strength was significantly lower for the UNI design than the other two framework designs (P = 0.001). Fracture strength did not significantly differ (P > 0.420) between identical framework designs in the ZAC and ZIC groups. A framework design with standardized layer thickness and adequate support of veneer by zirconia frameworks, as in the ANA and SUP designs, increases fracture resistance in implant-supported zirconia-based restorations under conditions of chewing attrition. Indirect composite material and porcelain perform similarly as layering materials on zirconia frameworks. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Simulation from the first principal theory on the effect of supporting silica on graphene and the new composite material

CSIR Research Space (South Africa)

Kiarii, EM

2017-07-01

Full Text Available Silica has been used as support material with many photocatalytic materials. In this study, silica polymorphs on graphene and epoxy graphene were studied using Density Functional Theory (DFT) to determine the interfacial and optical properties...

Proposed draft standard ANS 11.18: recommendations to facilitate decontamination and decommissioning

International Nuclear Information System (INIS)

Jenkins, C.E.; LaGuardia, T.S.; Jones, J.W.

1981-01-01

The purpose of ANS Standard 11.18 is to recommend design guides to facilitate decontamination and eventual decommissioning of a remotely operated radioactive facility. This design guide contains generic recommendations to assist in the planning, selection and arrangement of equipment and materials, and the protection of surfaces to enhance system decontamination and disassembly

A Mobile Ecotourism Recommendations System Using Cars-Context Aware Approaches

Directory of Open Access Journals (Sweden)

Yani Nurhadryani

2013-11-01

Full Text Available The requirements to fullfill mobility of ecotourism activities have been urgent to support each traveler with the mobile gadget application. The objective of this research is to develop an application of recommendation system based on online user personalization. This application provided features to recommendation of ecotourism based on profile user and current location, then supplied information about distance and facilities in each ecotourism place. The main of computation worked online which was based on approach called as CARS (Context Aware Recommender Systems algorithm. The result showed that the application framework succeeded to give appropriate recommendations and explaination on a mobile platform both in the form of profile based spatial data and user preferences.

A workshop on developing risk assessment methods for medical use of radioactive material. Volume 2: Supporting documents

Energy Technology Data Exchange (ETDEWEB)

Tortorelli, J.P. [ed.] [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

1995-08-01

A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains presentation material and a transcript of the workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report.

A workshop on developing risk assessment methods for medical use of radioactive material. Volume 2: Supporting documents

International Nuclear Information System (INIS)

Tortorelli, J.P.

1995-08-01

A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains presentation material and a transcript of the workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC's intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report

Feasibility study of thermal insulation materials for core support of experimental VHTR

International Nuclear Information System (INIS)

Kawakami, H.; Nakanishi, T.

1982-01-01

Thermal insulation materials for core support of the experimental VHTR, planned by JAERI, should maintain moderate compressive strength and dimensional stability as well as low thermal conductivity at the maximum service temperature of 1100 0 C for 20 years. For selecting materials, we investigate properties of some candidates, and evaluate their feasibility. Preliminary tests, heat treatment test and compressive creep tests for 1000 hours at 900 0 C and 1000 0 C were conducted. In the preliminary tests, EG-38B (carbon baked at 1350 0 C) and Fine Finnex 600 (silicon nitride) showed acceptable physical stability. In the heat treatment tests, silicon nitride showed weight loss probably caused by thermal decomposition. Compressive creep deformation of Fine Finnex 600 was negligible under stress of 100 kg/cm 2 for 1000 hours. Heat treatment at 1200 to 1300 0 C for 50 hours improved dimensional stability of carbon at 1000 0 C

Recommended vapor pressure and thermophysical data for ferrocene

Czech Academy of Sciences Publication Activity Database

Fulem, Michal; Růžička, K.; Červinka, C.; Rocha, M.A.A.; Santos, L.M.N.B.F.; Berg, R.F.

2013-01-01

Roč. 57, FEB (2013), 530-540 ISSN 0021-9614 Institutional support: RVO:68378271 Keywords : ferrocene * vapor pressure * heat capacity * ideal gas thermodynamic properties * sublimation enthalpy * recommended vapor pressure equation Subject RIV: BJ - Thermodynamics Impact factor: 2.423, year: 2013

Graphitized Carbon: A Promising Stable Cathode Catalyst Support Material for Long Term PEMFC Applications.

Science.gov (United States)

Mohanta, Paritosh Kumar; Regnet, Fabian; Jörissen, Ludwig

2018-05-28

Stability of cathode catalyst support material is one of the big challenges of polymer electrolyte membrane fuel cells (PEMFC) for long term applications. Traditional carbon black (CB) supports are not stable enough to prevent oxidation to CO₂ under fuel cell operating conditions. The feasibility of a graphitized carbon (GC) as a cathode catalyst support for low temperature PEMFC is investigated herein. GC and CB supported Pt electrocatalysts were prepared via an already developed polyol process. The physical characterization of the prepared catalysts was performed using transmission electron microscope (TEM), X-ray Powder Diffraction (XRD) and inductively coupled plasma optical emission spectrometry (ICP-OES) analysis, and their electrochemical characterizations were conducted via cyclic voltammetry(CV), rotating disk electrode (RDE) and potential cycling, and eventually, the catalysts were processed using membrane electrode assemblies (MEA) for single cell performance tests. Electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SEM) have been used as MEA diagonostic tools. GC showed superior stability over CB in acid electrolyte under potential conditions. Single cell MEA performance of the GC-supported catalyst is comparable with the CB-supported catalyst. A correlation of MEA performance of the supported catalysts of different Brunauer⁻Emmett⁻Teller (BET) surface areas with the ionomer content was also established. GC was identified as a promising candidate for catalyst support in terms of both of the stability and the performance of fuel cell.

Women's experiences of developing musculoskeletal diseases: employment challenges and policy recommendations.

Science.gov (United States)

Crooks, Valorie A

2007-07-30

To answer three specific questions: (i) How do women experience the workplace after the onset of a musculoskeletal disease; (ii) What employment policy and programme suggestions can they offer for ways to better support chronically ill women in their abilities to maintain workforce participation; and (iii) How are these women's employment policy and programme recommendations informed by their own lived experiences and desires? In-depth interviews were conducted with 18 women who had developed musculoskeletal diseases while involved in the labour market. Data were coded and analysed thematically. Participants identified three common workplace barriers experienced and three types of workplace accommodations commonly requested. They offered four specific employment policy and programme recommendations for ways to better support women who develop musculoskeletal diseases in maintaining labour market participation. It is found that their employment policy and programme recommendations are informed by their own experiences in the workplace and desires for being supported in maintaining involvement in paid labour. Creating employment programmes and policies that support chronically ill women in their attempts to remain involved in the workforce based on how much paid labour they are able to perform and where they are best able to work is of the utmost importance.

Mining and representing recommendations in actively evolving recommender systems

DEFF Research Database (Denmark)

Assent, Ira

2010-01-01

Recommender systems provide an automatic means of filtering out interesting items, usually based on past similarity of user ratings. In previous work, we have suggested a model that allows users to actively build a recommender network. Users express trust, obtain transparency, and grow (anonymous......) recommender connections. In this work, we propose mining such active systems to generate easily understandable representations of the recommender network. Users may review these representations to provide active feedback. This approach further enhances the quality of recommendations, especially as topics...... of interest change over time. Most notably, it extends the amount of control users have over the model that the recommender network builds of their interests....

18F-FDG PET/CT in breast cancer: Evidence-based recommendations in initial staging.

Science.gov (United States)

Caresia Aroztegui, Ana Paula; García Vicente, Ana María; Alvarez Ruiz, Soledad; Delgado Bolton, Roberto Carlos; Orcajo Rincon, Javier; Garcia Garzon, Jose Ramon; de Arcocha Torres, Maria; Garcia-Velloso, Maria Jose

2017-10-01

Current guidelines do not systematically recommend 18F-FDG PET/CT for breast cancer staging; and the recommendations and level of evidence supporting its use in different groups of patients vary among guidelines. This review summarizes the evidence about the role of 18F-FDG PET/CT in breast cancer staging and the therapeutic and prognostic impact accumulated in the last decade. Other related aspects, such as the association of metabolic information with biology and prognosis are considered and evidence-based recommendations for the use of 18F-FDG PET/CT in breast cancer staging are offered. We systematically searched MEDLINE for articles reporting studies with at least 30 patients related to clinical questions following the Problem/Population, Intervention, Comparison, and Outcome framework. We critically reviewed the selected articles and elaborated evidence tables structuring the summarized information into methodology, results, and limitations. The level of evidence and the grades of recommendation for the use of 18F-FDG PET/CT in different contexts are summarized. Level III evidence supports the use of 18F-FDG PET/CT for initial staging in patients with recently diagnosed breast cancer; the diagnostic and therapeutic impact of the 18F-FDG PET/CT findings is sufficient for a weak recommendation in this population. In patients with locally advanced breast cancer, level II evidence supports the use of 18F-FDG PET/CT for initial staging; the diagnostic and therapeutic impact of the 18F-FDG PET/CT findings is sufficient for a strong recommendation in this population. In patients with recently diagnosed breast cancer, the metabolic information from baseline 18F-FDG PET/CT is associated with tumor biology and has prognostic implications, supported by level II evidence. In conclusion, 18F-FDG PET/CT is not recommended for staging all patients with early breast cancer, although evidence of improved regional and systemic staging supports its use in locally advanced

Recommendations to Improve Downloads of Large Earth Observation Data

Directory of Open Access Journals (Sweden)

Rahul Ramachandran

2018-01-01

Full Text Available With the volume of Earth observation data expanding rapidly, cloud computing is quickly changing the way these data are processed, analyzed, and visualized. Collocating freely available Earth observation data on a cloud computing infrastructure may create opportunities unforeseen by the original data provider for innovation and value-added data re-use, but existing systems at data centers are not designed for supporting requests for large data transfers. A lack of common methodology necessitates that each data center handle such requests from different cloud vendors differently. Guidelines are needed to support enabling all cloud vendors to utilize a common methodology for bulk-downloading data from data centers, thus preventing the providers from building custom capabilities to meet the needs of individual vendors. This paper presents recommendations distilled from use cases provided by three cloud vendors (Amazon, Google, and Microsoft and are based on the vendors’ interactions with data systems at different Federal agencies and organizations. These specific recommendations range from obvious steps for improving data usability (such as ensuring the use of standard data formats and commonly supported projections to non-obvious undertakings important for enabling bulk data downloads at scale. These recommendations can be used to evaluate and improve existing data systems for high-volume data transfers, and their adoption can lead to cloud vendors utilizing a common methodology.

LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

Energy Technology Data Exchange (ETDEWEB)

Dunn, K. [Savannah River National Laboratory; Bellamy, S. [Savannah River National Laboratory; Daugherty, W. [Savannah River National Laboratory; Sindelar, R. [Savannah River National Laboratory; Skidmore, E. [Savannah River National Laboratory

2013-08-18

Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

The impact of fear appeals on processing and acceptance of action recommendations.

Science.gov (United States)

de Hoog, Natascha; Stroebe, Wolfgang; de Wit, John B F

2005-01-01

A stage model of processing of fear-arousing communications was tested in an experiment that examined the impact of vulnerability to a severe health risk, the quality of the arguments supporting a protective action recommendation, and the source to which the recommendation was attributed, on processing and acceptance of the recommendation. Argument quality influenced attitudes toward the recommendation (but not intention to act), and this effect was mediated by negative thoughts about the recommendation. Vulnerability influenced intention to act (but not attitudes), and this effect was mediated by perceived threat and positive thoughts about the recommendation. The pattern of findings suggests that although vulnerability to a severe health risk induces biased processing of the recommendation, biased processing is restricted to intentions and does not compromise the evaluation of the recommendation. The theoretical and practical implications of these findings are discussed.

Using a Recommendation System to Support Problem Solving and Case-Based Reasoning Retrieval

Science.gov (United States)

Tawfik, Andrew A.; Alhoori, Hamed; Keene, Charles Wayne; Bailey, Christian; Hogan, Maureen

2018-01-01

In case library learning environments, learners are presented with an array of narratives that can be used to guide their problem solving. However, according to theorists, learners struggle to identify and retrieve the optimal case to solve a new problem. Given the challenges novice face during case retrieval, recommender systems can be embedded…

An improved recommendation algorithm via weakening indirect linkage effect

Science.gov (United States)

Chen, Guang; Qiu, Tian; Shen, Xiao-Quan

2015-07-01

We propose an indirect-link-weakened mass diffusion method (IMD), by considering the indirect linkage and the source object heterogeneity effect in the mass diffusion (MD) recommendation method. Experimental results on the MovieLens, Netflix, and RYM datasets show that, the IMD method greatly improves both the recommendation accuracy and diversity, compared with a heterogeneity-weakened MD method (HMD), which only considers the source object heterogeneity. Moreover, the recommendation accuracy of the cold objects is also better elevated in the IMD than the HMD method. It suggests that eliminating the redundancy induced by the indirect linkages could have a prominent effect on the recommendation efficiency in the MD method. Project supported by the National Natural Science Foundation of China (Grant No. 11175079) and the Young Scientist Training Project of Jiangxi Province, China (Grant No. 20133BCB23017).

Practical Recommendations on Supplemental Feeding Introduction

Directory of Open Access Journals (Sweden)

S. G. Makarova

2015-01-01

Full Text Available Despite the availability of a national consensus document describing in detail modern approaches to feeding infants, pediatricians keep on giving most diverse recommendations on the time of supplemental feeding introduction. The article presents a brief historical review, as well the modern view on the issue of introduction of supplemental feeding to children. In the previous century, it was common both in Russia and most European countries to introduce supplemental feeding to children at the age of 2 or even 1.5 months. In 2002, the World Health Organization put forward an initiative in support of breastfeeding and recommended not to introduce supplemental feeding before the age of 6 months. A certain “golden mean” has apparently been achieved on the basis of results of studies and a longterm discussion among the specialists in feeding from different countries — all scientific communities and national recommendations of most countries define the optimal age for supplemental feeding introduction as “from 4 (completed months to 6 (completed months” with certain individual approach. 

Fabrication of graphene-fullerene hybrid by self-assembly and its application as support material for methanol electrocatalytic oxidation reaction

Science.gov (United States)

Zhang, Xuan; Zhang, Jia-Wei; Xiang, Ping-Hua; Qiao, Jinli

2018-05-01

Graphene-fullerene hybrids were facilely fabricated by self-assembly of graphene oxide (GO) and multi-substituted fulleropyrrolidines (PyrC60). The hybrids (GO-PyrC60) were applied as support materials to deposit Pd nanoparticle catalyst by a simple hydrothermal co-reduction approach. The as-prepared electrocatalysts (Pd/RGO-PyrC60) were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), respectively. The RGO-PyrC60 hybrid supported Pd catalyst with the optimal ratio of RGO to PyrC60, exhibited much enhanced electrocatalytic activity and stability toward methanol oxidation reaction (MOR) compared to the RGO alone supported Pd as well as commercial Pd/C. The introduction of fulleropyrrolidine as spacer between graphene layers could increase the electrocatalytic activity and improve the long-term stability. This strategy may contribute to developing graphene-fullerene hydrids as effective support materials for advanced electrocatalysts.

Science Concierge: A Fast Content-Based Recommendation System for Scientific Publications.

Science.gov (United States)

Achakulvisut, Titipat; Acuna, Daniel E; Ruangrong, Tulakan; Kording, Konrad

2016-01-01

Finding relevant publications is important for scientists who have to cope with exponentially increasing numbers of scholarly material. Algorithms can help with this task as they help for music, movie, and product recommendations. However, we know little about the performance of these algorithms with scholarly material. Here, we develop an algorithm, and an accompanying Python library, that implements a recommendation system based on the content of articles. Design principles are to adapt to new content, provide near-real time suggestions, and be open source. We tested the library on 15K posters from the Society of Neuroscience Conference 2015. Human curated topics are used to cross validate parameters in the algorithm and produce a similarity metric that maximally correlates with human judgments. We show that our algorithm significantly outperformed suggestions based on keywords. The work presented here promises to make the exploration of scholarly material faster and more accurate.

Professional Veterinary Programs' Perceptions and Experiences Pertaining to Emotional Support Animals and Service Animals, and Recommendations for Policy Development.

Science.gov (United States)

Schoenfeld-Tacher, Regina M; Kogan, Lori R

Given the unique nature of programs in professional veterinary medicine (PVM), the increasing numbers of students requesting accommodations for emotional support animals (ESAs) in higher education settings is of growing interest to student affairs and administrative staff in PVM settings. Since the legislation pertaining to this type of support animal differs from the laws governing disability service animals, colleges and universities now need to develop new policies and guidelines. Representatives from a sample of 28 PVM programs completed a survey about the prevalence of student requests for ESAs and service animals. PVM associate deans for academic affairs also reported their perceptions of this issue and the challenges these requests might pose within veterinary teaching laboratories and patient treatment areas. Responses indicated that approximately one third of PVM programs have received requests for ESAs (32.1%) in the last 2 years, 17.9% have had requests for psychiatric service animals, and 17.9% for other types of service animals. Despite this, most associate deans reported not having or not being aware of university or college policies pertaining to these issues. Most associate deans are interested in learning more about this topic. This paper provides general recommendations for establishing university or PVM program policies.

Quality of Industry Support to NPP Krsko

International Nuclear Information System (INIS)

Nemcic, K.

2008-01-01

NPP Krsko developed program for Supplier evaluation and performance. During the regular control of suppliers and evaluation of industry support to NPP Krsko quality problems were reported. Different quality systems were evaluated and different suppliers as: design organizations, equipment manufacturers, material vendors were audited or surveillance was performed. This paper discuss and report various cases where quality issues were problems based on audit results and present actions and efforts undertaken by the NE Krsko Quality Assurance Department to improve performance of the contractors, vendors, suppliers. New and different quality standards as approach in numerous articles are described as improvement or quality changes but also 'different opinion exist'. This paper also presents the author view and approach how to solve the possible future problems with different quality systems and organisations used by industry who support daily operation of NE Krsko and give recommendations for future nuclear projects.(author)

Improved cytotoxicity testing of magnesium materials

Energy Technology Data Exchange (ETDEWEB)

Fischer, Janine [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Structural Research on Macromolecules, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Proefrock, Daniel [Helmholtz-Zentrum Geesthacht, Institute for Coastal Research, Department for Marine Bioanalytical Chemistry, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Hort, Norbert [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Magnesium Processing, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Willumeit, Regine; Feyerabend, Frank [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Structural Research on Macromolecules, Max-Planck Str. 1, D - 21502 Geesthacht (Germany)

2011-06-25

Metallic magnesium (Mg) and its alloys are highly suitable for medical applications as biocompatible and biodegradable implant materials. Magnesium has mechanical properties similar to bone, stimulates bone regeneration, is an essential non-toxic element for the human body and degrades completely within the body environment. In consequence, magnesium is a promising candidate as implant material for orthopaedic applications. Protocols using the guideline of current ISO standards should be carefully evaluated when applying them for the characterization of the cytotoxic potential of degradable magnesium materials. For as-cast material we recommend using 10 times more extraction medium than recommended by the ISO standards to obtain reasonable results for reliable cytotoxicity rankings of degradable materials in vitro. In addition primary isolated human osteoblasts or mesenchymal stem cells should be used to test magnesium materials.

Improved cytotoxicity testing of magnesium materials

International Nuclear Information System (INIS)

Fischer, Janine; Proefrock, Daniel; Hort, Norbert; Willumeit, Regine; Feyerabend, Frank

2011-01-01

Metallic magnesium (Mg) and its alloys are highly suitable for medical applications as biocompatible and biodegradable implant materials. Magnesium has mechanical properties similar to bone, stimulates bone regeneration, is an essential non-toxic element for the human body and degrades completely within the body environment. In consequence, magnesium is a promising candidate as implant material for orthopaedic applications. Protocols using the guideline of current ISO standards should be carefully evaluated when applying them for the characterization of the cytotoxic potential of degradable magnesium materials. For as-cast material we recommend using 10 times more extraction medium than recommended by the ISO standards to obtain reasonable results for reliable cytotoxicity rankings of degradable materials in vitro. In addition primary isolated human osteoblasts or mesenchymal stem cells should be used to test magnesium materials.

Ada training evaluation and recommendations from the Gamma Ray Observatory Ada Development Team

International Nuclear Information System (INIS)

1985-10-01

The Ada training experiences of the Gamma Ray Observatory Ada development team are related, and recommendations are made concerning future Ada training for software developers. Training methods are evaluated, deficiencies in the training program are noted, and a recommended approach, including course outline, time allocation, and reference materials, is offered

Development of rock bolt grout and shotcrete for rock support and corrosion of steel in low-pH cementitious materials

Energy Technology Data Exchange (ETDEWEB)

Boden, Anders (Vattenfall Power Consultant AB, Vaellingby (Sweden)); Pettersson, Stig (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden))

2011-04-15

It is foreseen that cementitious products will be utilized in the construction of the final repository. The use of conventional cementitious material creates pulses in the magnitude of pH 12.13 in the leachates and release alkalis. Such a high pH is detrimental mainly to impairment of bentonite functioning, but also to possibly enhanced dissolution of spent fuel and alteration of fracture filling materials. It also complicates the safety analysis of the repository, as the effect of a high pH-plume should be considered in the evaluation. As no reliable pH-plume models exist, the use of products giving a pH below 11 in the leachates facilitates the safety analysis, although limiting the amount of low-pH cement is recommended. In earlier studies it was found that shotcreting, standard casting and rock bolting with low-pH cement (pH . 11 in the leachate) should be possible without any major development work. This report summarizes the results of development work done during 2008 and 2009 in the fields of low-pH rock bolt grout, low-pH shotcrete and steel corrosion in low-pH concrete. Development of low-pH rock bolt grout mixes and laboratory testing of the selected grout was followed by installation of twenty rock bolts for rock support at Aspo HRL using the chosen low-pH grout. The operation was successful and the bolts and grout are subject to follow up the next ten years. Low-pH shotcrete for rock support was initially developed within the ESDRED project, which was an Integrated Project within the European Commission sixth framework for research and technological development. ESDRED is an abbreviation for Engineering Studies and Demonstrations of Repository Designs. ESDRED was executed from 1st February 2004 to 31st January 2009. The development of the mix design described in this report was based on the results from ESDRED. After laboratory testing of the chosen mix, it was field tested in niche NASA 0408A at Aspo HRL. Further, some areas in the TASS-tunnel were

Development of rock bolt grout and shotcrete for rock support and corrosion of steel in low-pH cementitious materials

International Nuclear Information System (INIS)

Boden, Anders; Pettersson, Stig

2011-04-01

It is foreseen that cementitious products will be utilized in the construction of the final repository. The use of conventional cementitious material creates pulses in the magnitude of pH 12.13 in the leachates and release alkalis. Such a high pH is detrimental mainly to impairment of bentonite functioning, but also to possibly enhanced dissolution of spent fuel and alteration of fracture filling materials. It also complicates the safety analysis of the repository, as the effect of a high pH-plume should be considered in the evaluation. As no reliable pH-plume models exist, the use of products giving a pH below 11 in the leachates facilitates the safety analysis, although limiting the amount of low-pH cement is recommended. In earlier studies it was found that shotcreting, standard casting and rock bolting with low-pH cement (pH . 11 in the leachate) should be possible without any major development work. This report summarizes the results of development work done during 2008 and 2009 in the fields of low-pH rock bolt grout, low-pH shotcrete and steel corrosion in low-pH concrete. Development of low-pH rock bolt grout mixes and laboratory testing of the selected grout was followed by installation of twenty rock bolts for rock support at Aspo HRL using the chosen low-pH grout. The operation was successful and the bolts and grout are subject to follow up the next ten years. Low-pH shotcrete for rock support was initially developed within the ESDRED project, which was an Integrated Project within the European Commission sixth framework for research and technological development. ESDRED is an abbreviation for Engineering Studies and Demonstrations of Repository Designs. ESDRED was executed from 1st February 2004 to 31st January 2009. The development of the mix design described in this report was based on the results from ESDRED. After laboratory testing of the chosen mix, it was field tested in niche NASA 0408A at Aspo HRL. Further, some areas in the TASS-tunnel were

The ICRP 2007 recommendations

International Nuclear Information System (INIS)

Streffer, C.

2007-01-01

The last comprehensive International Commission on Radiological Protection (ICRP) recommendations have been published in 1991(1). Since that time new data in physics and biology that are relevant for radiological protection have appeared in the scientific literature. Also, the general thinking about safety standards at the workplace as well as for the protection of the public has developed. Thus, a review of the recommendations is needed. However, as the present standards have worked well, these new recommendations should build on the present ones. Only a process of further development should take place allowing for the following key points: - new biological and physical information and trends in the setting of safety standards; - improvement in the presentation of the recommendations; as much stability in the recommendations as is consistent with the new information and environmental aspects will be included. The fundamental principles of radiological protection will remain the same as they have been described in ICRP publication 60(1): Justification: Actions involving new exposures or changes in exposures of individuals have to be justified in advance. A positive net benefit must result. Optimisation: Exposures should be as low as reasonably achievable and should be optimised in relation to with dose constraints. Dose limits: The values will not to be changed from Publication 60. Dose constraints: Development of the concept proposed in Publication 60 will be explained. The ICRP Committees have prepared foundation documents in the fields for which they are responsible and their members have the corresponding expertise. These foundation documents will support the decisions and explain the various statements of the Main Commission in a broader sense. Some of them will be published as Annexes to the recommendations (Annex A: Biological and Epidemiological Information on Health Risks Attributable to Ionising Radiation; Annex B: Quantities used in Radiological

The ICRP 2007 recommendations

Energy Technology Data Exchange (ETDEWEB)

Streffer, C. [Chairman of ICRP Committee 2, Institute of Science and Ethics, University Duisburg-Essen, 45117 Essen (Germany)

2007-07-01

The last comprehensive International Commission on Radiological Protection (ICRP) recommendations have been published in 1991(1). Since that time new data in physics and biology that are relevant for radiological protection have appeared in the scientific literature. Also, the general thinking about safety standards at the workplace as well as for the protection of the public has developed. Thus, a review of the recommendations is needed. However, as the present standards have worked well, these new recommendations should build on the present ones. Only a process of further development should take place allowing for the following key points: - new biological and physical information and trends in the setting of safety standards; - improvement in the presentation of the recommendations; as much stability in the recommendations as is consistent with the new information and environmental aspects will be included. The fundamental principles of radiological protection will remain the same as they have been described in ICRP publication 60(1): Justification: Actions involving new exposures or changes in exposures of individuals have to be justified in advance. A positive net benefit must result. Optimisation: Exposures should be as low as reasonably achievable and should be optimised in relation to with dose constraints. Dose limits: The values will not to be changed from Publication 60. Dose constraints: Development of the concept proposed in Publication 60 will be explained. The ICRP Committees have prepared foundation documents in the fields for which they are responsible and their members have the corresponding expertise. These foundation documents will support the decisions and explain the various statements of the Main Commission in a broader sense. Some of them will be published as Annexes to the recommendations (Annex A: Biological and Epidemiological Information on Health Risks Attributable to Ionising Radiation; Annex B: Quantities used in Radiological

Occupational Health and Safety. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed…

Farm Management and Leadership. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in farm management and leadership: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner with the reading, writing, and spoken communication skills needed to deal with…

Accidents with potentially hazardous biological material among workers in hospital supporting services.

Science.gov (United States)

Canini, Silvia Rita Marin da Silva; Gir, Elucir; Machado, Alcyone Artiolli

2005-01-01

Descriptive study was carried out to characterize the occupational accidents involving potentially contaminated material among workers of hospital supporting services. The study reviewed records of workers involved in these accidents and attended at a specialized outpatient clinic of a large tertiary care hospital between January 1997 and October 2001. A total of 2814 workers from different professional categories were attended during this period. Of these, 147 (5.2%) belonged to the hospital supporting services and were the victims of 156 accidents, auxiliary cleaning personnel (80.2%), and over a third of the workers had not received any dose of hepatitis B vaccine (35.4%). Most accidents were due to sharp injuries (96.8%) caused by inadequately discarded hollow needles. Chemoprophylaxis for HIV was not indicated in only 23.1% of cases. We conclude that these workers are also exposed to the possibility of acquiring blood-borne pathogens and that periodical education programs are needed.

A Transitive Recommendation System for Information Technology Communities

Directory of Open Access Journals (Sweden)

Hesham Ali

2013-06-01

Full Text Available Social networks have become a new trend for research among computer scientist around the world. Social network had an impact on users' way of life. One of social network usages is recommendation systems. The need of recommendation systems is arising when users try to know best choice for them in many items types (books, experts, locations, technologies...etc. The problem is that a single person can't try all alternatives in all possibles life goals to compare. Thus, a person has to use his friends' expertise to select better option in any item category. This process is the main idea of “Recommendation Systems”. Recommendation systems usually depend on users-to-items ratings in a network (graph. Two main challenges for recommendation systems are accuracy of recommendation and computation size. The main objective of this paper is to introduce a suggested technique for transitive recommendation system based on users' collaborative ratings, and also to balance loading of computation. All this has to be applied on a special type of social network. Our work studied the transitivity usage in connections to get a relation (path as a recommendation for nodes not directly connected. The target social network has eight types of nodes. So, there are techniques that are not suitable to this complex type of network. Those we can present a new support for recommending items of several types to users with several types. We believe that this functionality hasn't been fully provided elsewhere. We have suggested using single source shortest path algorithm combined with Map Reduce technique, and mathematically deduced that we have a speeding up of algorithm by 10% approximately. Our testing results shows an accuracy of 89% and false rejection of 99% compared to traditional algorithms with less configuration parameters and more steady count of recommendations.

Status of ICRP recommendations at nuclear power plants

International Nuclear Information System (INIS)

Kaneko, Masahito

1996-01-01

Results of actual radiation exposure in nuclear power plants and related matters were presented for discussion of the principle of radiation protection involved in ICRP recommendations, which is prerequisite for safe operation of the plants and for treatment of radioactive waste. There were no personnel with actual exposure dose exceeding 50 mSv/y in 1995. Total exposure dose was 66.32 psn.Sv. and mean dose equivalent/personnel, 1.0 mSv. The amount of radioactive gasses and liquids released in the environment was far lower (<1/7,000) than that for the exposure index of 50 microSv/y in the public around the plant. The marked decrease in the amount of radioactive solid waste was noted in the plants. The laws and ICRP recommendations have been the basis for agreement between labor and management in the plant: e.g., the proposed voluntary dose was 30 mSv/y. This was also true for the recommendations in 1990. Finally, followings were proposed to ICRP: re-examination of linear theory without threshold, consideration for the balance between the radiation and other kind of hazardous materials and factors, carefulness in changing the recommendation concept, and exclusion of more severe limitations than those included in ICRP recommendations. (K.H.)

Recommendations for a nomenclature system for reporting methylation aberrations in imprinted domains

DEFF Research Database (Denmark)

Monk, David; Morales, Joannella; den Dunnen, Johan T

2018-01-01

Disorders we have discussed these issues and designed a nomenclature for naming imprinted DMRs as well as for reporting methylation values. We apply these recommendations for imprinted DMRs that are commonly assayed in clinical laboratories and show how they support standardized database submission....... The recommendations are in line with existing recommendations, most importantly the Human Genome Variation Society nomenclature, and should facilitate accurate reporting and data exchange among laboratories and thereby help to avoid future confusion....

Roussely report: recommendations

International Nuclear Information System (INIS)

Anon.

2010-01-01

A summary of the Roussely report on how to reinforce and support French nuclear industry, has been made public. This report recommends a series of measures. The main measures are: 1) the quick achievement in the best conditions possible of the Olkiluoto plant, 2) to assure the construction of Flamanville-3 under the best conditions of cost and delay, 3) to benefit totally from the feedback experiences of the construction of Olkiluoto and Flamanville-3 for the construction of Penly-3 and of the English program of EPR, 4) to confirm EDF as a leader for French industrial bids proposing nuclear power plants, 5) to diversify the offer of reactors for international bids, 6) to set a common body of rules for all the employees working in the nuclear sector in France, 7) to support the extension of service life of power reactors up to 60 years if safety is not at stake, 8) to promote French safety regulations at an international scale, and 9) to create a university of nuclear engineering. (A.C.)

RECOMMENDATIONS FOR SAMPLING OF TANK 19 IN F TANK FARM

Energy Technology Data Exchange (ETDEWEB)

Harris, S.; Shine, G.

2009-12-14

Representative sampling is required for characterization of the residual material in Tank 19 prior to operational closure. Tank 19 is a Type IV underground waste storage tank located in the F-Tank Farm. It is a cylindrical-shaped, carbon steel tank with a diameter of 85 feet, a height of 34.25 feet, and a working capacity of 1.3 million gallons. Tank 19 was placed in service in 1961 and initially received a small amount of low heat waste from Tank 17. It then served as an evaporator concentrate (saltcake) receiver from February 1962 to September 1976. Tank 19 also received the spent zeolite ion exchange media from a cesium removal column that once operated in the Northeast riser of the tank to remove cesium from the evaporator overheads. Recent mechanical cleaning of the tank removed all mounds of material. Anticipating a low level of solids in the residual waste, Huff and Thaxton [2009] developed a plan to sample the waste during the final clean-up process while it would still be resident in sufficient quantities to support analytical determinations in four quadrants of the tank. Execution of the plan produced fewer solids than expected to support analytical determinations in all four quadrants. Huff and Thaxton [2009] then restructured the plan to characterize the residual separately in the North and the South regions: two 'hemispheres.' This document provides sampling recommendations to complete the characterization of the residual material on the tank bottom following the guidance in Huff and Thaxton [2009] to split the tank floor into a North and a South hemisphere. The number of samples is determined from a modification of the formula previously published in Edwards [2001] and the sample characterization data for previous sampling of Tank 19 described by Oji [2009]. The uncertainty is quantified by an upper 95% confidence limit (UCL95%) on each analyte's mean concentration in Tank 19. The procedure computes the uncertainty in analyte

Standard Guide for Testing Polymer Matrix Composite Materials

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall appl...

Materials used in new generation vehicles: supplies, shifts, and supporting infrastructure

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R. [Oak Ridge National Lab., TN (United States); Schexnayder, S.M. [Univ. of Tennessee, Knoxville, (United States)

1997-08-01

The Partnership for a New Generation of Vehicles (PNGV) program intends to develop new designs for automobiles that will reduce fuel consumption by two thirds but otherwise have price, comfort, safety, and other measures of performance similar to the typical automobile now on the market. PNGV vehicle designs are expected to substitute lightweight materials, such as aluminum, magnesium, carbon-reinforced polymer composites, glass-reinforced polymer composites, and ultra- light steel, for heavier materials such as steel and iron in automobile components. The target mass of a PNGV vehicle is 1,960 pounds, as compared to the average current vehicle that weights 3,240 pounds. Other changes could include the use of different ferrous alloys, engineering changes, or incorporation of advanced ceramic components. Widespread adoption of these vehicle designs would affect materials markets and require concurrent development and adoption of supporting technologies to supply the materials and to use and maintain them in automobiles. This report identifies what would be required to bring about these changes and developments in materials substitution; identifies reasons that might make these substitutions difficult to accomplish within the overall objectives and timetable of the PNGV program; and identifies any issues arising from the substitution that could prompt consideration of policies to deal with them. The analysis in this paper uses scenarios that assume the production of new generation vehicles will begin in 2007 and that their market share will increase gradually over the following 25 years. The scenarios on which the analysis is based assume a maximum substitution of each potential replacement material considered. This maximum substitution of individual materials (i.e., the amount of replacement material by weight that would be added to the baseline vehicle`s composition) is as follows: ULSAB (high strength steel), 298 lbs.; glass-reinforced composites, 653 lbs.; carbon

Supporting newly qualified nurse transition: A case study in a UK hospital.

Science.gov (United States)

Whitehead, Bill; Owen, Patricia; Henshaw, Lorraine; Beddingham, Elaine; Simmons, Maxine

2016-01-01

Nurse education in the United Kingdom (UK) has been university based since the mid-1990s but despite careful preparation and assessment of student nurses it has been considered necessary to provide a period of additional support for newly qualified nurses (NQNs) to help them settle into their new role and responsibilities. Preceptorship is the process of supporting NQNs over the transition from student to registered nurse (RN) and it is recognised that this can be a difficult time for NQNs. A systematic review was conducted as part of this project and has been published in an earlier edition of Nurse Education Today (Whitehead et al, 2013). This suggests that preceptorship is a positive and essential experience for NQNs. Lincoln and Guba's Naturalistic Inquiry (1985) was used. A qualitative case study method was developed and consisted of a multi-stage approach including semi-structured interviews with key personnel; documentary analysis of preceptorship material; and focus groups with key actors. Ethical approval was attained for the project. The aim was to interpret the social phenomena and to produce an evidence based tool to improve preceptorship. Findings are grouped under the headings indicated by the research design. In addition a further 11 themes emerged, including: the need for specific time for preceptors and preceptees; formal recognition of the role and a culture of support; selection and preparation of preceptors and the management structure to support preceptorship. The findings indicate that there are a range of factors which are reported to affect the successful transition from student to NQN. Based on these factors recommendations are made for practice and for further research. Practice recommendations: to provide supported preceptorship following the recommendations of the research findings. to concentrate on enhancing preceptorship as preceptorship in any form is better than none. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dossier: transport of radioactive materials

International Nuclear Information System (INIS)

Mignon, H.; Brachet, Y.; Turquet de Beauregard, G.; Mauny, G.; Robine, F.; Plantet, F.; Pestel Lefevre, O.; Hennenhofer, G.; Bonnemains, J.

1997-01-01

This dossier is entirely devoted to the transportation of radioactive and fissile materials of civil use. It comprises 9 papers dealing with: the organization of the control of the radioactive materials transport safety (safety and security aspects, safety regulations, safety analysis and inspection, emergency plans, public information), the technical aspects of the regulation concerning the transport of radioactive materials (elaboration of regulations and IAEA recommendations, risk assessments, defense in depth philosophy and containers, future IAEA recommendations, expertise-research interaction), the qualification of containers (regulations, test facilities), the Transnucleaire company (presentation, activity, containers for spent fuels), the packages of radioactive sources for medical use (flux, qualification, safety and transport), an example of accident during radioactive materials transportation: the Apach train derailment (February 4, 1997), the sea transport of radioactive materials (international maritime organization (OMI), international maritime dangerous goods (IMDG) code, irradiated nuclear fuel (INF) safety rules), the transport of radioactive materials in Germany, and the point of view from an external observer. (J.S.)

Farmers as Employers. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of farmers as employers: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with employment of agriculture…

Supplemental Journal Article Materials: A progress report on an information industry initiative

Science.gov (United States)

Schwarzman, A. B.

2011-12-01

Who could possibly quibble with the idea of publishing supplemental materials to a journal article? Making them available makes it possible for the Earth and space scientists to demonstrate supporting evidence, such as multimedia, computer programs, and datasets; gives the authors the opportunity to present in-depth studies that would not otherwise be available; and enables the readers to replicate experiments and verify their results. However, the scholarly publishing ecosystem is now being threatened by a veritable tsunami of supplemental materials that have to be peer reviewed, identified, described, and made discoverable and citeable; such materials also have to be archived, preserved, and perpetually converted to the contemporary formats to be available to a future researcher. Moreover, the readers often have no clear indication of how critical a particular supplemental material is to the scientific conclusions of the article and thus are not sure whether they should spend their time reading/viewing/running it. In some cases it is not even clear what the material actually supplements. While one segment of the research community argues that even more supplemental materials should be made available, another segment increasingly voices its concern stating categorically that a research article is not a data dump or an FTP site. From the publisher's perspective, dealing with supplemental materials in a responsible fashion is becoming an increasingly costly proposition. Faced with formidable challenges of managing supplemental materials, the information profession community in 2010 formed a joint NISO/NFAIS Working Group to develop Recommended Practices for curating supplemental materials during their life cycle, including but not limited to their selection, peer review, editing, production, presentation, providing context, identification, linking, citing, hosting, discovery, metadata and markup, packaging, accessibility, and preservation. The Recommended Practices

Composite materials processing, applications, characterizations

CERN Document Server

2017-01-01

Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

Application of the US decision support tool for materials and waste management

International Nuclear Information System (INIS)

Thorneloe, Susan A.; Weitz, Keith; Jambeck, Jenna

2007-01-01

The US Environmental Protection Agency (US EPA) launched the Resource Conservation Challenge (RCC) in 2002 to help reduce waste and move towards more sustainable resource consumption. The objective of the RCC is to help communities, industries, and the public think in terms of materials management rather than waste disposal. Reducing cost, finding more efficient and effective strategies to manage municipal waste, and thinking in terms of materials management requires a holistic approach that considers life-cycle environmental tradeoffs. The US EPA's National Risk Management Research Laboratory has led the development of a municipal solid waste decision support tool (MSW-DST). The computer software can be used to calculate life-cycle environmental tradeoffs and full costs of different waste management or materials recovery programs. The environmental methodology is based on the use of life-cycle assessment and the cost methodology is based on the use of full-cost accounting. Life-cycle inventory (LCI) environmental impacts and costs are calculated from the point of collection, handling, transport, treatment, and disposal. For any materials that are recovered for recycling, offsets are calculated to reflect potential emissions savings from use of virgin materials. The use of the MSW-DST provides a standardized format and consistent basis to compare alternatives. This paper provides an illustration of how the MSW-DST can be used by evaluating ten management strategies for a hypothetical medium-sized community to compare the life-cycle environmental and cost tradeoffs. The LCI results from the MSW-DST are then used as inputs into another US EPA tool, the Tool for the reduction and assessment of chemical and other environmental impacts, to convert the LCI results into impact indicators. The goal of this paper is to demonstrate how the MSW-DST can be used to identify and balance multiple criteria (costs and environmental impacts) when evaluating options for materials and

Surgery for constipation: systematic review and practice recommendations: Graded practice and future research recommendations.

Science.gov (United States)

Knowles, C H; Grossi, U; Horrocks, E J; Pares, D; Vollebregt, P F; Chapman, M; Brown, S; Mercer-Jones, M; Williams, A B; Yiannakou, Y; Hooper, R J; Stevens, N; Mason, J

2017-09-01

This manuscript forms the final of seven that address the surgical management of chronic constipation (CC) in adults. The content coalesces results from the five systematic reviews that precede it and of the European Consensus process to derive graded practice recommendations (GPR). Summary of review data, development of GPR and future research recommendations as outlined in detail in the 'introduction and methods' paper. The overall quality of data in the five reviews was poor with 113/156(72.4%) of included studies providing only level IV evidence and only four included level I RCTs. Coalescence of data from the five procedural classes revealed that few firm conclusions could be drawn regarding procedural choice or patient selection: no single procedure dominated in addressing dynamic structural abnormalities of the anorectum and pelvic floor with each having similar overall efficacy. Of one hundred 'prototype' GPRs developed by the clinical guideline group, 85/100 were deemed 'appropriate' based on the independent scoring of a panel of 18 European experts and use of RAND-UCLA consensus methodology. The remaining 15 were all deemed uncertain. Future research recommendations included some potential RCTs but also a strong emphasis on delivery of large multinational high-quality prospective cohort studies. While the evidence base for surgery in CC is poor, the widespread European consensus for GPRs is encouraging. Professional bodies have the opportunity to build on this work by supporting the efforts of their membership to help convert the documented recommendations into clinical guidelines. © 2017 The Authors. Colorectal Disease published by John Wiley & Sons Ltd on behalf of Association of Coloproctology of Great Britain and Ireland.

Physical protection of nuclear material

International Nuclear Information System (INIS)

1975-01-01

Full text: An Advisory Group met to consider the up-dating and extension of the Recommendations for the Physical Protection of Nuclear Material, produced in 1972. Twenty-seven experts from 11 countries and EURATOM were present. Growing concern has been expressed in many countries that nuclear material may one day be used for acts of sabotage or terrorism. Serious attention is therefore being given to the need for States to develop national systems for the physical protection of nuclear materials during use, storage and transport throughout the nuclear fuel cycle which should minimize risks of sabotage or theft. The revised Recommendations formulated by the Advisory Group include new definitions of the objectives of national systems of physical protection and proposals for minimizing possibilities of unauthorized removal and sabotage to nuclear facilities. The Recommendations also describe administrative or organizational steps to be taken for this purpose and the essential technical requirements of physical protection for various types and locations of nuclear material, e.g., the setting up of protected areas, the use of physical barriers and alarms, the need for security survey, and the need of advance arrangements between the States concerned in case of international transportation, among others. (author)

Science Concierge: A Fast Content-Based Recommendation System for Scientific Publications.

Directory of Open Access Journals (Sweden)

Titipat Achakulvisut

Full Text Available Finding relevant publications is important for scientists who have to cope with exponentially increasing numbers of scholarly material. Algorithms can help with this task as they help for music, movie, and product recommendations. However, we know little about the performance of these algorithms with scholarly material. Here, we develop an algorithm, and an accompanying Python library, that implements a recommendation system based on the content of articles. Design principles are to adapt to new content, provide near-real time suggestions, and be open source. We tested the library on 15K posters from the Society of Neuroscience Conference 2015. Human curated topics are used to cross validate parameters in the algorithm and produce a similarity metric that maximally correlates with human judgments. We show that our algorithm significantly outperformed suggestions based on keywords. The work presented here promises to make the exploration of scholarly material faster and more accurate.

75 FR 33311 - Guidance for Industry on Bioequivalence Recommendations for Specific Products; Availability

Science.gov (United States)

2010-06-11

... available recommendations on how to design product-specific BE studies to support ANDAs. Under this process... thinking on a new process for making available to sponsors FDA guidance on how to design product-specific... ``Bioequivalence Recommendations for Specific Products.'' This guidance describes a new process for making...

The IAEA recommendations for providing protection during the transport of uranium hexafluoride

International Nuclear Information System (INIS)

Levin, I.; Wieser, K.

1988-01-01

The Regulations for the safe transport of radioactive materials, are the basis of national and international regulations concerning this subject throughout the world. These regulations require that subsidiary hazards associated with radioactive materials should also be considered. Other national and international regulations concerning the transport of dangerous materials consider that a radioactive material having other dangerous properties should be classified as class 7. Following this line and acting upon the recommendations of SAGSTRAM (Standing Advisory Committee on the Safe Transport of Radioactive Materials) that the Agency should take the lead in providing guidance to Member States with respect to UF 6 packaging and transport, the Agency convened two expert meetings during 1986 and 1987 in order to look into the special problems associated with the transport of uranium hexafluoride. The experts identified several areas in which additional safety measures should be considered if the transport of UF 6 is to have a non-radiological safety level consistent with that of its radiological risks. In this presentation the new recommendations are described. The main safety issues to be discussed are fire resistance, valve protection and compatibility with service and structural equipment. Another aspect of importance is the interface between the process and the transport phases, bearing in mind that the same containers are used in both. This paper also reveals how far the new recommendations concerning UF 6 have already been endorsed in the forthcoming European Transport Regulations (ADR/RID) together with the 1985 revised Edition of IAEA Safety Series No. 6

Operational Decision Support for Material Management in Continuous Mining Systems: From Simulation Concept to Practical Full-Scale Implementations

Directory of Open Access Journals (Sweden)

Masoud Soleymani Shishvan

2017-07-01

Full Text Available Material management in opencast mines is concerned with planning, organizing, and control of the flow of materials from their extraction points to destinations. It can be strongly affected by operational decisions that have to be made during the production process. To date, little research has focused on the application of simulation modeling as a powerful supportive tool for decision making in such systems. Practical experiences from implementing a simulation model of a mine for the operational support on an industrial scale are not known to the authors. This paper presents the extension of a developed stochastic simulation model by the authors from a conceptual stage (TRL4 to a new Technology Readiness Level (TRL 6 by implementing it in an industrially relevant environment. A framework for modeling, simulation, and validation of the simulation model applied to two large opencast lignite mines is presented in detail. Operational implementation issues, experiences, and challenges in practical applications are discussed. Furthermore, the strength of applying the simulation modeling as an operational decision support for material management in coal mining is demonstrated. Results of the case studies are used to describe the details of the framework, and to illustrate the strength and limitations of its application.

Recommendations for the presentation of infrared absorption spectra in data collections condensed phases

CERN Document Server

Becker, E D

2013-01-01

Recommendations for the Presentation of Infrared Absorption Spectra in Data Collections-A. Condensed Phases presents the recommendations related to the infrared spectra of condensed phase materials that are proposed for permanent retention in data collections. These recommendations are based on two reports published by the Coblentz Society. This book emphasizes the three levels of quality evaluation for infrared spectra as designated by the Coblentz Society, including critically defined physical data, research quality analytical spectra, and approved analytical spectra. This text discusses the

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

Energy Technology Data Exchange (ETDEWEB)

Sobolik, S.R.; Ho, C.K.; Dunn, E. [Sandia National Labs., Albuquerque, NM (United States); Robey, T.H. [Spectra Research Inst., Albuquerque, NM (United States); Cruz, W.T. [Univ. del Turabo, Gurabo (Puerto Rico)

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document.

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

International Nuclear Information System (INIS)

Sobolik, S.R.; Ho, C.K.; Dunn, E.; Robey, T.H.; Cruz, W.T.

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document

FUNGIBLE AND COMPATIBLE BIOFUELS: LITERATURE SEARCH, SUMMARY, AND RECOMMENDATIONS

Energy Technology Data Exchange (ETDEWEB)

Bunting, Bruce G [ORNL; Bunce, Michael [ORNL; Barone, Teresa L [ORNL; Storey, John Morse [ORNL

2011-04-01

The purpose of the study described in this report is to summarize the various barriers to more widespread distribution of bio-fuels through our common carrier fuel distribution system, which includes pipelines, barges and rail, fuel tankage, and distribution terminals. Addressing these barriers is necessary to allow the more widespread utilization and distribution of bio-fuels, in support of a renewable fuels standard and possible future low-carbon fuel standards. These barriers can be classified into several categories, including operating practice, regulatory, technical, and acceptability barriers. Possible solutions to these issues are discussed; including compatibility evaluation, changes to bio-fuels, regulatory changes, and changes in the distribution system or distribution practices. No actual experimental research has been conducted in the writing of this report, but results are used to develop recommendations for future research and additional study as appropriate. This project addresses recognized barriers to the wider use of bio-fuels in the areas of development of codes and standards, industrial and consumer awareness, and materials compatibility issues.

The development of an enhanced strain measurement device to support testing of radioactive material packages

International Nuclear Information System (INIS)

Uncapkher, W.L.; Arviso, M.

1995-01-01

Radioactive material package designers use structural testing to verify and demonstrate package performance. A major part of evaluating structural response is the collection of reliable instrumentation measurement data. Over the last four decades, Sandia National Laboratories (SNL) has been actively involved in the development, testing, and evaluation of measurement devices for a broad range of applications, resulting in the commercialization of several measurement devices commonly used today. SNL maintains an ongoing program sponsored by the US Department of Energy (DOE) to develop and evaluate measurement devices to support testing of packages used to transport radioactive or hazardous materials. The development of the enhanced strain measurement device is part of this program

Options and recommendations for a web database of material and construction inspection.

Science.gov (United States)

2015-02-01

The Illinois Department of Transportation (IDOT) has been using software developed in-house for their : materials management and construction project management needs. The primary packages under : review MISTIC (Materials Management) and ICORS (Const...

A new perspective on the ICRP's new draft recommendations

International Nuclear Information System (INIS)

Clarke, R.

1990-01-01

The final text of the new recommendations of the International Commission on Radiation Protection is due to be published in the first quarter of 1991. The recommendations consist of a main text supported by the three major appendices: quantities and units; biological effects of ionising radiation; and criteria for judging the significance of the effects of radiation. Aspects of the report considered here are: risk estimates; radiation detriment including fatal and non-fatal cancers and hereditary defects; the system of protection; dose and risks limits; the concept of a dose constraint; quantities and units. (author)

The Schizophrenia Patient Outcomes Research Team (PORT): updated treatment recommendations 2009.

Science.gov (United States)

Kreyenbuhl, Julie; Buchanan, Robert W; Dickerson, Faith B; Dixon, Lisa B

2010-01-01

The Schizophrenia Patient Outcomes Research Team (PORT) project has played a significant role in the development and dissemination of evidence-based practices for schizophrenia. In contrast to other clinical guidelines, the Schizophrenia PORT Treatment Recommendations, initially published in 1998 and first revised in 2003, are based primarily on empirical data. Over the last 5 years, research on psychopharmacologic and psychosocial treatments for schizophrenia has continued to evolve, warranting an update of the PORT recommendations. In consultation with expert advisors, 2 Evidence Review Groups (ERGs) identified 41 treatment areas for review and conducted electronic literature searches to identify all clinical studies published since the last PORT literature review. The ERGs also reviewed studies preceding 2002 in areas not covered by previous PORT reviews, including smoking cessation, substance abuse, and weight loss. The ERGs reviewed over 600 studies and synthesized the research evidence, producing recommendations for those treatments for which the evidence was sufficiently strong to merit recommendation status. For those treatments lacking empirical support, the ERGs produced parallel summary statements. An Expert Panel consisting of 39 schizophrenia researchers, clinicians, and consumers attended a conference in November 2008 in which consensus was reached on the state of the evidence for each of the treatment areas reviewed. The methods and outcomes of the update process are presented here and resulted in recommendations for 16 psychopharmacologic and 8 psychosocial treatments for schizophrenia. Another 13 psychopharmacologic and 4 psychosocial treatments had insufficient evidence to support a recommendation, representing significant unmet needs in important treatment domains.

Group Recommendation Systems Based on External Social-Trust Networks

Directory of Open Access Journals (Sweden)

Guang Fang

2018-01-01

Full Text Available With the development of social networks and online mobile communities, group recommendation systems support users’ interaction with similar interests or purposes with others. We often provide some advices to the close friends, such as listening to favorite music and sharing favorite dishes. However, users’ personalities have been ignored by the traditional group recommendation systems while the majority is satisfied. In this paper, a method of group recommendation based on external social-trust networks is proposed, which builds a group profile by analyzing not only users’ preferences, but also the social relationships between members inside and outside of the group. We employ the users’ degree of disagreement to adjust group preference rating by external information of social-trust network. Moreover, having a discussion about different social network utilization ratio, we proposed a method to work for smaller group size. The experimental results show that the proposed method has consistently higher precision and leads to satisfactory recommendations for groups.

Review of fatigue criteria development for HTGR core supports

International Nuclear Information System (INIS)

Ho, F.H.; Vollman, R.E.

1979-10-01

Fatigue criteria for HTGR core support graphite structure are presented. The criteria takes into consideration the brittle nature of the material, and emphasizes the probabilistic approach in the treatment of strength data. The stress analysis is still deterministic. The conventional cumulative damage approach is adopted here. A specified minimum S-N curve is defined as the curve with 99% probability of survival at a 95% confidence level to accommodate random variability of the material strength. A constant life diagram is constructed to reconcile the effect of mean stress. The linear damage rule is assumed to account for the effect of random cycles. An additional factor of safety of three on cycles is recommended. The uniaxial S-N curve is modified in the medium-to-high cycle range (> 2 x 10 3 cycles) for mutiaxial fatigue effects

[Nutritional support in sepsis].

Science.gov (United States)

Ortiz Leyba, C; López Martínez, J; Blesa Malpica, A L

2005-06-01

Although it is considered that metabolic and nutritional support must be part of the management of septic patients, it has not been conclusively shown that nutritional support will improve survival or complications from sepsis. Specific data on this issue are scarce since there are few studies that have investigated specialized nutritional support in septic patients. Thus, most of the recommendations are based on outcomes obtained in severely ill patients with different pathologies. It is assumed that nutritional support should be carried out through the enteral route whenever possible, as in other critically ill patients. The energetic waste in these patients is highly variable, although in general terms the hypermetabolic situation may be classified as moderate. An adjustment factor of 1.25-1.30 is recommended for the Harris-Benedict's equation to calculate the caloric intake. Septic patients should receive a hyperproteic intake. The amount of glucose administered should not exceed 70% of non-protein calories, and lipids intake should not exceed 40%. With regards to micronutrients, it is recommended to increase the supply of those with antioxidant properties (vitamin E, carotenes, vitamin C, selenium). There are data to consider that the use of diets enriched with pharmaco-nutrients (both with parenteral and enteral routes) may be beneficial in septic patients, although there is some controversy when interpreting the outcomes.

Investigating the role of educative curriculum materials in supporting teacher enactment of a field-based urban ecology investigation

Science.gov (United States)

Houle, Meredith

2008-10-01

This multiple case study examined how three urban science teachers used curriculum materials designed educatively. Educative curriculum materials have been suggested as one way to support science teacher learning, particularly around new innovations and new pedagogies and to support teachers in evaluating and modifying materials to meet the needs of their students (Davis & Krajcik, 2005). While not a substitute for professional development, educative curriculum materials may provide an opportunity to support teachers' enactment and learning in the classroom context (Davis & Krajcik, 2005; Remillard, 2005; Schneider & Krajcik, 2002). However, little work has examined how science teachers interact with written curriculum materials to design classroom instruction. Grounded in sociocultural analysis, this study takes the theoretical stance that teachers and curriculum materials are engaged in a dynamic and participatory relationship from which the planned and enacted curriculum emerges (Remillard, 2005). Teaching is therefore a design activity where teachers rely on their personal resources and the curricular resources to construct and shape their students' learning experiences (Brown, 2002). Specifically this study examines how teacher beliefs influence their reading and use of curriculum and how educative features in the written curriculum inform teachers' pedagogical decisions. Data sources included classroom observation and video, teacher interviews, and classroom artifacts. To make sense how teachers' make curricular decisions, video were analyzed using Brown's (2002) Pedagogical Design for Enactment Framework. These coded units were examined in light of the teacher interviews, classroom notes and artifacts to examine how teachers' beliefs influenced these decisions. Data sources were then reexamined for evidence of teachers' use of specific educative features. My analyses revealed that teachers' beliefs about curriculum influenced the degree to which teachers

May I Suggest? Comparing Three PLE Recommender Strategies

Science.gov (United States)

Modritscher, Felix; Krumay, Barbara; El Helou, Sandy; Gillet, Denis; Nussbaumer, Alexander; Albert, Dietrich; Dahn, Ingo; Ullrich, Carsten

2011-01-01

Personal learning environment (PLE) solutions aim at empowering learners to design (ICT and web-based) environments for their learning activities, mashing-up content and people and apps for different learning contexts. Widely used in other application areas, recommender systems can be very useful for supporting learners in their PLE-based…

SY-101 Rapid Transfer Project Low Temperature Operations Review and Recommendations to Support Lower Temperature Limits

International Nuclear Information System (INIS)

HICKMAN, G.L.

2000-01-01

The lower temperature limit for the 241 SY-101 RAPID transfer project is currently set at 20 F Based on the analysis and recommendations in this document this limit can be lowered to 0 F. Analysis of all structures systems and components (SSCs) indicate that a reduction in operating temperature may be achieved with minor modifications to field-installed equipment. Following implementation of these changes it is recommended that the system requirements be amended to specify a temperature range for transfer or back dilute evolutions of 0 F to 100 F

International Nuclear Safety Center database on thermophysical properties of reactor materials

International Nuclear Information System (INIS)

Fink, J.K.; Sofu, T.; Ley, H.

1997-01-01

The International Nuclear Safety Center (INSC) database has been established at Argonne National Laboratory to provide easily accessible data and information necessary to perform nuclear safety analyses and to promote international collaboration through the exchange of nuclear safety information. The INSC database, located on the World Wide Web at http://www.insc.anl.gov, contains critically assessed recommendations for reactor material properties for normal operating conditions, transients, and severe accidents. The initial focus of the database is on thermodynamic and transport properties of materials for water reactors. Materials that are being included in the database are fuel, absorbers, cladding, structural materials, coolant, and liquid mixtures of combinations of UO 2 , ZrO 2 , Zr, stainless steel, absorber materials, and concrete. For each property, the database includes: (1) a summary of recommended equations with uncertainties; (2) a detailed data assessment giving the basis for the recommendations, comparisons with experimental data and previous recommendations, and uncertainties; (3) graphs showing recommendations, uncertainties, and comparisons with data and other equations; and (4) property values tabulated as a function of temperature

The development of a digital signal processing and plotting package to support testing of hazardous and radioactive material packages

International Nuclear Information System (INIS)

Ludwigsen, J.S.; Uncapher, W.L.; Arviso, M.; Lattier, C.N.; Hankinson, M.; Cannone, D.J.

1995-01-01

Federal regulations allow package designers to use analysis, testing, or a combination of analysis and testing to support certification of packages used to transport hazardous or radioactive materials. In recent years, many certified packages were subjected to a combination of analysis and testing. A major part of evaluating structural or thermal package response is the collection, reduction and presentation of instrumentation measurement data. Sandia National Laboratories, under the sponsorship of the US Department of Energy, has developed a comprehensive analysis and plotting package (known as KAPP) that performs digital signal processing of both transient structural and thermal data integrated with a comprehensive plotting package designed to support radioactive material package testing

Summary report of the state surveillance program on the transportation of radioactive materials

International Nuclear Information System (INIS)

1977-11-01

From 1973 to 1976, a surveillance program was conducted in New Jersey, Oregon, Missouri, New York, Illinois, Texas, Louisiana, South Carolina, Minnesota, and New York City to provide training support for State radiation personnel and to determine actual radiation exposure conditions and radioactive material package handling practices through the terminals of air carriers and freight forwarders. NRC and DOT along with the participating States, developed the surveillance program. In general, the results did not indicate a public health or safety problem due to the transportation of radioactive materials. Some employees of several freight forwarders, are, however, receiving annual exposures in excess of 500 mrem. Recommendations are given

Classification of Recommender Expertise in the Wikipedia Recommender System

DEFF Research Database (Denmark)

Jensen, Christian D.; Pilkauskas, Povilas; Lefévre, Thomas

2011-01-01

to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

Classification of Recommender Expertise in the Wikipedia Recommender System

DEFF Research Database (Denmark)

Jensen, Christian D.; Pilkauskas, Povilas; Lefevre, Thomas

2011-01-01

to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles "which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

Unallocated Off-Specification Highly Enriched Uranium: Recommendations for Disposition

Energy Technology Data Exchange (ETDEWEB)

Bridges, D. N.; Boeke, S. G.; Tousley, D. R.; Bickford, W.; Goergen, C.; Williams, W.; Hassler, M.; Nelson, T.; Keck, R.; Arbital, J.

2002-02-27

The U.S. Department of Energy (DOE) has made significant progress with regard to disposition planning for 174 metric tons (MTU) of surplus Highly Enriched Uranium (HEU). Approximately 55 MTU of this 174 MTU are ''offspec'' HEU. (''Off-spec'' signifies that the isotopic or chemical content of the material does not meet the American Society for Testing and Materials standards for commercial nuclear reactor fuel.) Approximately 33 of the 55 MTU have been allocated to off-spec commercial reactor fuel per an Interagency Agreement between DOE and the Tennessee Valley Authority (1). To determine disposition plans for the remaining {approx}22 MTU, the DOE National Nuclear Security Administration (NNSA) Office of Fissile Materials Disposition (OFMD) and the DOE Office of Environmental Management (EM) co-sponsored this technical study. This paper represents a synopsis of the formal technical report (NNSA/NN-0014). The {approx} 22 MTU of off-spec HEU inventory in this study were divided into two main groupings: one grouping with plutonium (Pu) contamination and one grouping without plutonium. This study identified and evaluated 26 potential paths for the disposition of this HEU using proven decision analysis tools. This selection process resulted in recommended and alternative disposition paths for each group of HEU. The evaluation and selection of these paths considered criteria such as technical maturity, programmatic issues, cost, schedule, and environment, safety and health compliance. The primary recommendations from the analysis are comprised of 7 different disposition paths. The study recommendations will serve as a technical basis for subsequent programmatic decisions as disposition of this HEU moves into the implementation phase.

Recommender Systems for Technology Enhanced Learning: Research Trends & Applications

NARCIS (Netherlands)

Manouselis, Nikos; Verbert, Katrien; Drachsler, Hendrik; Santos, Olga

2014-01-01

As an area, Technology Enhanced Learning (TEL) aims to design, develop and test socio-technical innovations that will support and enhance learning practices of individuals and organizations. Information retrieval is a pivotal activity in TEL and the deployment of recommender systems has attracted

Online Student Services: Current Practices and Recommendations for Implementation

Science.gov (United States)

Bailey, Tabitha L.; Brown, Abbie

2016-01-01

Recommendations for planning and development of online student services based on a review of the literature on research conducted in a variety of college settings. Focus topics include the institutional website, help desks and information centers, student orientation, academic support, and library services.

Post Stroke Llife in Iranian People: Used and Recommended Strategies

Directory of Open Access Journals (Sweden)

Asghar Dalvandi

2009-04-01

Full Text Available Objectives: Stroke survivors develop their own strategies to combat disabilities, developing strategies to maintain or reestablish a sense of continuity after the disruptive life event that stroke represents, using strategies to foster hope during the process of adjusting to life after stroke and drawing on spiritual practices. The aim of this study is to identify the used and recommended strategies of life after stroke among Iranian people. Methods: A grounded theory approach was recruited using semi-structured interviews with 10 stroke survivors, 12 family caregivers and 6 formal care givers. Results: Five main concepts emerged describing as the used and recommended strategies of the participants including, improving functional performance, re-learning life skills and educational support, accessing to rehabilitative services, socio-economical support and well-suited coping strategies. Discussion: Participants valued better knowledge and skills regarding the adaptive strategies for stroke survivors and their family care givers are essential in accomplishing with activities of daily living and doing social roles for improving life after stroke. Also developing the socio- economic supports is crucial for assuring a more supportive approach to achieve rehabilitation services and design better educational program for them.

The physical protection of nuclear material

International Nuclear Information System (INIS)

1989-12-01

A Technical Committee on Physical Protection of Nuclear Material met in April-May 1989 to advise on the need to update the recommendations contained in document INFCIRC/225/Rev.1 and on any changes considered to be necessary. The Technical Committee indicated a number of such changes, reflecting mainly: the international consensus established in respect of the Convention on the Physical Protection of Nuclear Material; the experience gained since 1977; and a wish to give equal treatment to protection against the theft of nuclear material and protection against the sabotage of nuclear facilities. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. 1 tab

Findings and Recommendations from the NIST Workshop on Alternative Fuels and Materials: Biocorrosion.

Science.gov (United States)

Mansfield, Elisabeth; Sowards, Jeffrey W; Crookes-Goodson, Wendy J

2015-01-01

In 2013, the Applied Chemicals and Materials Division of the National Institute of Standards and Technology (NIST) hosted a workshop to identify and prioritize research needs in the area of biocorrosion. Materials used to store and distribute alternative fuels have experienced an increase in corrosion due to the unique conditions caused by the presence of microbes and the chemistry of biofuels and biofuel precursors. Participants in this workshop, including experts from the microbiological, fuel, and materials communities, delved into the unique materials and chemical challenges that occur with production, transport, and storage of alternative fuels. Discussions focused on specific problems including: a) the changing composition of "drop-in" fuels and the impact of that composition on materials; b) the influence of microbial populations on corrosion and fuel quality; and c) state-of-the-art measurement technologies for monitoring material degradation and biofilm formation.

Transportation of Hazardous Evidentiary Material.

Energy Technology Data Exchange (ETDEWEB)

Osborn, Douglas.

2005-06-01

This document describes the specimen and transportation containers currently available for use with hazardous and infectious materials. A detailed comparison of advantages, disadvantages, and costs of the different technologies is included. Short- and long-term recommendations are also provided.3 DraftDraftDraftExecutive SummaryThe Federal Bureau of Investigation's Hazardous Materials Response Unit currently has hazardous material transport containers for shipping 1-quart paint cans and small amounts of contaminated forensic evidence, but the containers may not be able to maintain their integrity under accident conditions or for some types of hazardous materials. This report provides guidance and recommendations on the availability of packages for the safe and secure transport of evidence consisting of or contaminated with hazardous chemicals or infectious materials. Only non-bulk containers were considered because these are appropriate for transport on small aircraft. This report will addresses packaging and transportation concerns for Hazardous Classes 3, 4, 5, 6, 8, and 9 materials. If the evidence is known or suspected of belonging to one of these Hazardous Classes, it must be packaged in accordance with the provisions of 49 CFR Part 173. The anthrax scare of several years ago, and less well publicized incidents involving unknown and uncharacterized substances, has required that suspicious substances be sent to appropriate analytical laboratories for analysis and characterization. Transportation of potentially hazardous or infectious material to an appropriate analytical laboratory requires transport containers that maintain both the biological and chemical integrity of the substance in question. As a rule, only relatively small quantities will be available for analysis. Appropriate transportation packaging is needed that will maintain the integrity of the substance, will not allow biological alteration, will not react chemically with the substance being

Family/Friend Recommendations and Mammography Intentions: The Roles of Perceived Mammography Norms and Support

Science.gov (United States)

Molina, Yamile; Ornelas, India J.; Doty, Sarah L.; Bishop, Sonia; Beresford, Shirley A. A.; Coronado, Gloria D.

2015-01-01

Identifying factors that increase mammography use among Latinas is an important public health priority. Latinas are more likely to report mammography intentions and use, if a family member or friend recommends that they get a mammogram. Little is known about the mechanisms underlying the relationship between social interactions and mammography…

Finding and Recommending Scholarly Articles

Science.gov (United States)

Kurtz, Michael J.; Henneken, Edwin A.

2014-05-01

The rate at which scholarly literature is being produced has been increasing at approximately 3.5 percent per year for decades. This means that during a typical 40 year career the amount of new literature produced each year increases by a factor of four. The methods scholars use to discover relevant literature must change. Just like everybody else involved in information discovery, scholars are confronted with information overload. Two decades ago, this discovery process essentially consisted of paging through abstract books, talking to colleagues and librarians, and browsing journals. A time-consuming process, which could even be longer if material had to be shipped from elsewhere. Now much of this discovery process is mediated by online scholarly information systems. All these systems are relatively new, and all are still changing. They all share a common goal: to provide their users with access to the literature relevant to their specific needs. To achieve this each system responds to actions by the user by displaying articles which the system judges relevant to the user's current needs. Recently search systems which use particularly sophisticated methodologies to recommend a few specific papers to the user have been called "recommender systems". These methods are in line with the current use of the term "recommender system" in computer science. We do not adopt this definition, rather we view systems like these as components in a larger whole, which is presented by the scholarly information systems themselves. In what follows we view the recommender system as an aspect of the entire information system; one which combines the massive memory capacities of the machine with the cognitive abilities of the human user to achieve a human-machine synergy.

Recommendations for providing protection during the transport of uranium hexafluoride

International Nuclear Information System (INIS)

1987-06-01

In July 1986 a group of consultants was convened by the IAEA to provide initial guidance on the transport of UF 6 and the regulations for it considering the hazards posed by this material. A Technical Committee meeting was held in November 1986 to finalize the development of the recommendations for providing protection during the transport of UF 6 . This report provides the recommendations resulting from the meetings of these experts. The IAEA recommends that national competent authorities and other relevant national regulatory and standards-related organizations, and appropriate international organizations seriously consider all of the information provided in this report especially the additional requirements set forth in Section III.3 concerning design, manufacturing and testing requirements, design approval requirements, requirements on loading for transport, and requirements for quality assurance and maintenance. This report also deals with United Nations' Recommendations of the Transport of Dangerous Goods, International Modal Regulatory Documents, ANSIN14.1-1982 and ISO/DIS/7195 Standards

A Conceptual Framework for Evolving, Recommender Online Learning Systems

Science.gov (United States)

Peiris, K. Dharini Amitha; Gallupe, R. Brent

2012-01-01

A comprehensive conceptual framework is developed and described for evolving recommender-driven online learning systems (ROLS). This framework describes how such systems can support students, course authors, course instructors, systems administrators, and policy makers in developing and using these ROLS. The design science information systems…

How evidence-based are the recommendations in evidence-based guidelines?

Directory of Open Access Journals (Sweden)

Finlay A McAlister

2007-08-01

Full Text Available BACKGROUND: Treatment recommendations for the same condition from different guideline bodies often disagree, even when the same randomized controlled trial (RCT evidence is cited. Guideline appraisal tools focus on methodology and quality of reporting, but not on the nature of the supporting evidence. This study was done to evaluate the quality of the evidence (based on consideration of its internal validity, clinical relevance, and applicability underlying therapy recommendations in evidence-based clinical practice guidelines. METHODS AND FINDINGS: A cross-sectional analysis of cardiovascular risk management recommendations was performed for three different conditions (diabetes mellitus, dyslipidemia, and hypertension from three pan-national guideline panels (from the United States, Canada, and Europe. Of the 338 treatment recommendations in these nine guidelines, 231 (68% cited RCT evidence but only 105 (45% of these RCT-based recommendations were based on high-quality evidence. RCT-based evidence was downgraded most often because of reservations about the applicability of the RCT to the populations specified in the guideline recommendation (64/126 cases, 51% or because the RCT reported surrogate outcomes (59/126 cases, 47%. CONCLUSIONS: The results of internally valid RCTs may not be applicable to the populations, interventions, or outcomes specified in a guideline recommendation and therefore should not always be assumed to provide high-quality evidence for therapy recommendations.

A recommender system for medical imaging diagnostic.

Science.gov (United States)

Monteiro, Eriksson; Valente, Frederico; Costa, Carlos; Oliveira, José Luís

2015-01-01

The large volume of data captured daily in healthcare institutions is opening new and great perspectives about the best ways to use it towards improving clinical practice. In this paper we present a context-based recommender system to support medical imaging diagnostic. The system relies on data mining and context-based retrieval techniques to automatically lookup for relevant information that may help physicians in the diagnostic decision.

Transportation of radioactive materials. Safety and regulation

International Nuclear Information System (INIS)

Niel, Jean-Christophe

2013-01-01

This engineering-oriented publication first presents fluxes and risks related to the transportation of radioactive materials: fluxes, risks, in-depth defence, and parcel typology. The author then describes the elaboration process for transportation regulations: IAEA recommendations for the transportation of radioactive materials and their review process, IAEA recommendations for modal regulations. He presents the French transportation regulation framework: evolutions of IAEA recommendations, case of aerial transport, and case of maritime transport. The next part addresses the specific case of the transportation of uranium hexafluoride. The last part addresses incidents and accidents occurring during transportation: declarations to be made, brief presentations of several examples of incidents and accidents

Design methods and criteria recommended by the RAMSES committee

International Nuclear Information System (INIS)

Jakubowicz, H.; Moulin, D.; Petrequin, P.; Tortel, J.; Schaller, K.

1980-09-01

The design of structures of LMFBR in France must comply with the national regulations and takes into account the rules adopted by other countries but these rules need complements. The French Atomic Energy Commission has founded a committee named RAMSES (which states for 'Regles d'Analyse Mecanique des Structures') in order to write recommendations to give out the needed informations on design rules based on all the available background experience. The elastic follow up problem has received great attention and a recommendation was already printed. Of great concern in elevated temperature is a creep fatigue investigation. A creep fatigue design method adapted to materials used is being set up

Section 2: Corrosion and failure analysis studies in support of the pulp and paper industry

Energy Technology Data Exchange (ETDEWEB)

Keiser, J.R.; Pawel, S.J.; Swindeman, R.W.; Longmire, H.F. [Oak Ridge National Lab., TN (United States)

1997-04-01

Technical support is being provided to various pulp and paper companies and related industries to help determine the cause of material degradation problems and to identify alternate materials to prevent such degradation. During the past year, examinations have included parts from several sootblowers, two failed economizer tubes, and inspection of a continuous digester. The results of the analyses and inspections were communicated to the plant operators, and, in some cases, recommendations were made. This article discusses examination of sootblower nozzles, which evidenced intergranular cracking. Analysis indicated the presence of chromium carbide precipitates along the grain boundaries, which can cause the sample to be sensitized to grain boundary attack.

The influence of evaluation recommendations on instrumental and conceptual uses: A preliminary analysis.

Science.gov (United States)

Bourgeois, Isabelle; Whynot, Jane

2018-06-01

Evaluation recommendations are sometimes included in evaluation reports to highlight specific actions to be taken to improve a program or to make other changes to its operational context. This preliminary study sought to examine evaluation recommendations drawn from 25 evaluation reports published by Canadian federal government departments and agencies, in order to examine the evaluation issues covered and the focus of the recommendations. Our results show that in keeping with policy requirements, the evaluation recommendations focused on program relevance, effectiveness and efficiency and economy. Furthermore, a significant number of recommendations also focused on the implementation of more rigorous performance measurement strategies. The focus of the recommendations did not vary by publication date, recommendation type, and organizational sector. The findings also show that for the most part, the management responses produced as part of the broader evaluation process support the recommendations included in the report and identify specific timelines for implementation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Language disorders in young children : when is speech therapy recommended?

NARCIS (Netherlands)

Goorhuis-Brouwer, SM; Knijff, WA

Objective: Analysis of treatment recommendation given by speech therapists. Evaluation of the language abilities in the examined children and re-examination of those abilities after 12 months. Materials and methods: Thirty-four children, aged between 2.0 and 5.3 years, referred to speech therapists

Stress relaxation and creep of high-temperature gas-cooled reactor core support ceramic materials: a literature search

International Nuclear Information System (INIS)

Selle, J.E.; Tennery, V.J.

1980-05-01

Creep and stress relaxation in structural ceramics are important properties to the high-temperature design and safety analysis of the core support structure of the HTGR. The ability of the support structure to function for the lifetime of the reactor is directly related to the allowable creep strain and the ability of the structure to withstand thermal transients. The thermal-mechanical response of the core support pads to steady-state stresses and potential thermal transients depends on variables, including the ability of the ceramics to undergo some stress relaxation in relatively short times. Creep and stress relaxation phenomena in structural ceramics of interest were examined. Of the materials considered (fused silica, alumina, silicon nitride, and silicon carbide), alumina has been more extensively investigated in creep. Activation energies reported varied between 482 and 837 kJ/mole, and consequently, variations in the assigned mechanisms were noted. Nabarro-Herring creep is considered as the primary creep mechanism and no definite grain size dependence has been identified. Results for silicon nitride are in better agreement with reported activation energies. No creep data were found for fused silica or silicon carbide and no stress relaxation data were found for any of the candidate materials. While creep and stress relaxation are similar and it is theoretically possible to derive the value of one property when the other is known, no explicit demonstrated relationship exists between the two. For a given structural ceramic material, both properties must be experimentally determined to obtain the information necessary for use in high-temperature design and safety analyses

Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials

Directory of Open Access Journals (Sweden)

Vahideh Nazari

2017-01-01

Full Text Available Objectives: Fracture strength is an important factor influencing the clinical long-term success of implant-supported prostheses especially in high stress situations like excessive crown height space (CHS. The purpose of this study was to compare the fracture strength of implant-supported fixed partial dentures (FPDs with excessive crown height, fabricated from three different materials.Materials and Methods: Two implants with corresponding abutments were mounted in a metal model that simulated mandibular second premolar and second molar. Thirty 3-unit frameworks with supportive anatomical design were fabricated using zirconia, nickel-chromium alloy (Ni-Cr, and polyetheretherketone (PEEK (n=10. After veneering, the CHS was equal to 15mm. Then; samples were axially loaded on the center of pontics until fracture in a universal testing machine at a crosshead speed of 0.5 mm/minute. The failure load data were analyzed by one-way ANOVA and Games-Howell tests at significance level of 0.05.Results: The mean failure loads for zirconia, Ni-Cr and PEEK restorations were 2086±362N, 5591±1200N and 1430±262N, respectively. There were significant differences in the mean failure loads of the three groups (P<0.001. The fracture modes in zirconia, metal ceramic and PEEK restorations were cohesive, mixed and adhesive type, respectively.Conclusions: According to the findings of this study, all implant supported three-unit FPDs fabricated of zirconia, metal ceramic and PEEK materials are capable to withstand bite force (even para-functions in the molar region with excessive CHS.Keywords: Dental Implants; Polyetheretherketone; Zirconium oxide; Dental Restoration Failure; Dental Porcelain

Frequency and outcomes of biopsy-proven fibroadenomas recommended for surgical excision.

Science.gov (United States)

Lee, Shimwoo; Mercado, Cecilia L; Cangiarella, Joan F; Chhor, Chloe M

2017-12-16

Our aim was to investigate the outcomes of fibroadenomas recommended for surgical excision due to large size (>2cm) or interval growth. A retrospective review of our institutional radiology database from 2007 to 2015 was performed. We identified 167 biopsy-proven fibroadenomas recommended for surgical consultation. Of these, 75 (45%) cases actually underwent excision, 7 (9%, 95% CI: 4-18%) of which were upgraded to phyllodes tumors upon histopathological examination. Our results support the current recommendation to surgically excise breast lesions diagnosed as fibroadenomas with size >2cm or with interval growth due to the considerable risk of finding phyllodes tumors. Copyright © 2017 Elsevier Inc. All rights reserved.

18 CFR 347.1 - Material to support request for newly established or changed property account depreciation studies.

Science.gov (United States)

2010-04-01

... request for newly established or changed property account depreciation studies. 347.1 Section 347.1... REGULATIONS UNDER THE INTERSTATE COMMERCE ACT OIL PIPELINE DEPRECIATION STUDIES § 347.1 Material to support request for newly established or changed property account depreciation studies. (a) Means of filing...

Materials challenges supporting new sodium fast reactor designs

International Nuclear Information System (INIS)

Gelineau, O.; Goff, S. Dubiez-le; Dubuisson, Ph.; Dalle, F.; Blat, M.

2009-01-01

Sodium Fast Reactor is considered in France as the most mature technology of the different Generation IV systems. In the short-term the designing work is focused on the identification of the potential tracks to improve competitiveness, safety, efficiency and to reduce cost. In that frame the materials have a key role to play. This paper is focused on the new materials envisaged and on the Research and Development program launched in France by Areva NP, CEA and EDF in order to sustain the innovative design options: ferritic steels as candidates for exchangers, steam generators and possibly sodium circuits, optimization of materials and fabrication processes to improve safety and risk management, extension of material databases to take into account the 60 years life duration including irradiation and ageing effect. (author)

Environmental impacts of construction materials. A report on the contribution of construction materials to greenhouse gas emissions of construction; Rakennusmateriaalien ympaeristoevaikutukset. Selvitys rakennusmateriaalien vaikutuksesta rakentamisen kasvihuonekaasupaeaestoeihin, tiivistelmaeraportti

Energy Technology Data Exchange (ETDEWEB)

Ruuska, A.; Haekkinen, T.; Vares, S.; Korhonen, M.-R.; Myllymaa, T.

2013-05-15

assurance. The study recommends that attention should be paid to construction materials when developing guidelines for energy efficient and low-carbon buildings. To support the design of sustainable buildings, information, tools and methods should be available to enable the carbon footprint of construction materials to be taken into account. It is also recommended that the overall GHG emissions and energy performance of public buildings be calculated. In addition, research is needed to study alternative ways of implementing guidelines taking into account the overall effects and cost impacts of construction. (orig.)

Occupational Health and Safety. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with occupational safety and…

Learning Design of Problem Based Learning Model Based on Recommendations of Sintax Study and Contents Issues on Physics Impulse Materials with Experimental Activities

Directory of Open Access Journals (Sweden)

Kristia Agustina

2017-08-01

Full Text Available This study aims to design learning Problem Based Learning Model based on syntax study recommendations and content issues on Physics Impulse materials through experiments. This research is a development research with Kemp model. The reference for making the learning design is the result of the syntax study and the content of existing PBL implementation problems from Agustina research. This instructional design is applied to the physics material about Impulse done through experimental activity. Limited trials were conducted on the SWCU Physics Education Study Program students group Salatiga, while the validity test was conducted by high school teachers and physics education lecturers. The results of the trial evaluation are limited and the validity test is used to improve the designs that have been made. The conclusion of this research is the design of learning by using PBL model on Impuls material by referring the result of syntax study and the problem content of existing PBL implementation can be produced by learning activity designed in laboratory experiment activity. The actual problem for Impuls material can be used car crash test video at factory. The results of validation tests and limited trials conducted by researchers assessed that the design of learning made by researchers can be used with small revisions. Suggestions from this research are in making learning design by using PBL model to get actual problem can by collecting news that come from newspaper, YouTube, internet, and television.

Seminar Cum Meeting Report: Codata Task Group for Exchangeable Material Data Representation to Support Research and Education

Directory of Open Access Journals (Sweden)

T Ashino

2008-11-01

Full Text Available On March 4-5, 2008, the CODATA Task Group for Exchangeable Material Data Representation to Support Research and Education held a two day seminar cum meeting at the National Physical Laboratory (NPL, New Delhi, India, with NPL materials researchers and task group members representing material activities and databases from seven countries: European Union (The Czech Republic, France, and the Netherlands, India, Korea, Japan, and the United States. The NPL seminar included presentations about the researchers' work. The Task Group meeting included presentations about current data related activities of the members. Joint discussions between NPL researchers and CODATA task group members began an exchange of viewpoints among materials data producers, users, and databases developers. The seminar cum meeting included plans to continue and expand Task Group activities at the 2008 CODATA 21st Meeting in Kyiv, Ukraine.

Thermal/chemical degradation of ceramic cross-flow filter materials

Energy Technology Data Exchange (ETDEWEB)

Alvin, M.A.; Lane, J.E.; Lippert, T.E.

1989-11-01

This report summarizes the 14-month, Phase 1 effort conducted by Westinghouse on the Thermal/Chemical Degradation of Ceramic Cross-Flow Filter Materials program. In Phase 1 expected filter process conditions were identified for a fixed-bed, fluid-bed, and entrained-bed gasification, direct coal fired turbine, and pressurized fluidized-bed combustion system. Ceramic cross-flow filter materials were also selected, procured, and subjected to chemical and physical characterization. The stability of each of the ceramic cross-flow materials was assessed in terms of potential reactions or phase change as a result of process temperature, and effluent gas compositions containing alkali and fines. In addition chemical and physical characterization was conducted on cross-flow filters that were exposed to the METC fluid-bed gasifier and the New York University pressurized fluidized-bed combustor. Long-term high temperature degradation mechanisms were proposed for each ceramic cross-flow material at process operating conditions. An experimental bench-scale test program is recommended to be conducted in Phase 2, generating data that support the proposed cross-flow filter material thermal/chemical degradation mechanisms. Papers on the individual subtasks have been processed separately for inclusion on the data base.

MODELO DE VIGILANCIA TECNOLÓGICA APOYADO POR RECOMENDACIONES BASADAS EN EL FILTRADO COLABORATIVO / TECHNOLOGY SURVEILLANCE MODEL SUPPORTED BY RECOMMENDATIONS BASED ON COLLABORATIVE FILTERING

Directory of Open Access Journals (Sweden)

Yoel Abreu-Lee

2013-05-01

Full Text Available La vigilancia tecnológica en centros de investigación y universidades está enfocada a realizar un seguimiento sistemático sobre el desarrollo de líneas de investigación, investigadores líderes, posibilidades de colaboración científico-tecnológica y también al conocimiento de las tendencias actuales desde la investigación. Todo lo anteriormente expresado permite guiar las investigaciones y apoyar la estrategia científico-tecnológica. El presente trabajo propone un modelo de vigilancia tecnológica apoyado de un sistema de recomendaciones, como una aplicación que está centrada en las preferencias de los investigadores en universidades y centros de investigación. Para proponer las recomendaciones se emplea el filtrado colaborativo, técnica que utiliza información del comportamiento pasado de los investigadores y de las opiniones o valoraciones de la comunidad científica a la que pertenecen. Este nuevo enfoque permite realizar propuestas de colaboración y temas de interés que se discuten en la comunidad científica en la que tiene lugar, de manera automática y proactiva.AbstractTechnology surveillance has a special place nowadays, in the success and development of R+D+i process, in research centers and academic environment. Technology surveillance in universities and research centers is focused in the constant analysis of the research lines, research leaders, collaborations chances and current trends in specific research fields. This paper presents a technology surveillance model supported by recommendations by an application that takes into account the preferences of the researchers in the academic environment. The recommender system uses the collaborative filtering technique in order to compute the behavior and past user interactions and infer the recommendations. This approach allows recommending useful, automatic and proactive collaboration possibilities and topics of interest which are discussed within the scientific

Prevalence of Recommendations Made Within Dental Research Articles Using Uncontrolled Intervention or Observational Study Designs.

Science.gov (United States)

Wilson, M K; Chestnutt, I G

2016-03-01

Evidence to inform clinical practice is reliant on research carried out using appropriate study design. The objectives of this work were to (i) identify the prevalence of articles reporting on human studies using uncontrolled intervention or observational research designs published in peer-reviewed dental journals and (ii) determine the nature of recommendations made by these articles. Six peer-reviewed dental journals were selected. Issues published in January to June 2013 were examined and the types of articles published categorized. Following pre-defined inclusion/exclusion criteria, human studies classified as using uncontrolled intervention or observational research designs were subject to detailed review by two independent investigators, to examine if they presented clinical, policy or research recommendations and if these recommendations were supported by the data presented. 52.9% (n = 156) of studies published during the time period met the inclusion criteria. Studies with uncontrolled intervention or observational research designs comprised a larger proportion of the primary research studies published in the journals with lower impact factors (73.3%; n = 107) compared to the high impact journals (38.9%; n = 49). Analysis showed that 60.9% (n = 95) of the included studies made recommendations for clinical practice/dental policy. In 28.2% (n = 44) of studies, the clinical/policy recommendations made were judged to not be fully supported by the data presented. Many studies published in the current dental literature, which are not considered to produce strong evidence, make recommendations for clinical practice or policy. There were some cases when the recommendations were not fully supported by the data presented. Copyright © 2016 Elsevier Inc. All rights reserved.

Information filtering in sparse online systems: recommendation via semi-local diffusion.

Science.gov (United States)

Zeng, Wei; Zeng, An; Shang, Ming-Sheng; Zhang, Yi-Cheng

2013-01-01

With the rapid growth of the Internet and overwhelming amount of information and choices that people are confronted with, recommender systems have been developed to effectively support users' decision-making process in the online systems. However, many recommendation algorithms suffer from the data sparsity problem, i.e. the user-object bipartite networks are so sparse that algorithms cannot accurately recommend objects for users. This data sparsity problem makes many well-known recommendation algorithms perform poorly. To solve the problem, we propose a recommendation algorithm based on the semi-local diffusion process on the user-object bipartite network. The simulation results on two sparse datasets, Amazon and Bookcross, show that our method significantly outperforms the state-of-the-art methods especially for those small-degree users. Two personalized semi-local diffusion methods are proposed which further improve the recommendation accuracy. Finally, our work indicates that sparse online systems are essentially different from the dense online systems, so it is necessary to reexamine former algorithms and conclusions based on dense data in sparse systems.

Physicochemical characteristics of the coconut pulp (Acrocomia aculeata) for use as support of proteins and metal material

Energy Technology Data Exchange (ETDEWEB)

Yubero, F.; Ayala, J.; Lopez, M.; Valdovinos, V.; Monteiro, M.; Gonzalez, Y., E-mail: fyubero@qui.una.py [National University of Asunción (Paraguay); Thompson, W. [Universidade Estadual de Londrina (UEL), PR (Brazil). Departamento de Fisica; Arguello, J. [Universidade Federal do Rio Grande do Sul (UFRGS), RS (Brazil). Instituto de Quimica

2016-07-01

The fruit of the Acrocomia aculeata, native palm tree typical of the tropical region, is exploited mainly for the manufacture of oils and animal consumption. This study was aimed to determine the physicochemical characteristics of the residue of the Acrocomia aculeata coconut pulp in order to apply it in the development of new materials. Therefore fruits collected for the production of pulp were drying and pulverized, the chemical and mineral compositions were studied by GAFTA standardized techniques for the analysis of crude fiber, protein, fat and calories and INAA respectively. Subsequently, the initial material was chemically modified and assessed the solubilities of the native material and the obtained modified material proving to be completely insoluble in solvents organic and aqueous (water, ethanol, terbutanol, isobutanol and hexane), the materials were analyzed by IR with Transformed Fourier and the results showed the existence of changes in the double link lengthening conjugated and aromatic; and link double nitrogen C=N/N=O. EPR analysis indicated that the materials obtained are not paramagnetic at room temperature, however can incorporate magnetite and Fe{sup 0}. These preliminary studies concluded that this eco material could be applied as support of proteins and metals. (author)

Physicochemical characteristics of the coconut pulp (Acrocomia aculeata) for use as support of proteins and metal material

International Nuclear Information System (INIS)

Yubero, F.; Ayala, J.; Lopez, M.; Valdovinos, V.; Monteiro, M.; Gonzalez, Y.; Thompson, W.; Arguello, J.

2016-01-01

The fruit of the Acrocomia aculeata, native palm tree typical of the tropical region, is exploited mainly for the manufacture of oils and animal consumption. This study was aimed to determine the physicochemical characteristics of the residue of the Acrocomia aculeata coconut pulp in order to apply it in the development of new materials. Therefore fruits collected for the production of pulp were drying and pulverized, the chemical and mineral compositions were studied by GAFTA standardized techniques for the analysis of crude fiber, protein, fat and calories and INAA respectively. Subsequently, the initial material was chemically modified and assessed the solubilities of the native material and the obtained modified material proving to be completely insoluble in solvents organic and aqueous (water, ethanol, terbutanol, isobutanol and hexane), the materials were analyzed by IR with Transformed Fourier and the results showed the existence of changes in the double link lengthening conjugated and aromatic; and link double nitrogen C=N/N=O. EPR analysis indicated that the materials obtained are not paramagnetic at room temperature, however can incorporate magnetite and Fe 0 . These preliminary studies concluded that this eco material could be applied as support of proteins and metals. (author)

Recommended reference materials for realization of physicochemical properties density

CERN Document Server

Herington, E F G

1976-01-01

This book first presents the nomenclature and units used in the determination of densities of liquids and solids, followed by a general description of the apparatus and the methods used in the measurement of density, with particular reference to the pycnometric, hydrostatic weighing, magnetic float, and temperature flotation methods. The use of water as a density reference material is then explained, focusing on the isotopic composition of Standard Mean Ocean Water (SMOW) and the absolute density of SMOW as a function of temperature. Problems due to the effect of pressure and dissolved gases o

Economic evaluation on tight sandstone gas development projects in China and recommendation on fiscal and taxation support policies

Directory of Open Access Journals (Sweden)

Zhen Yang

2016-11-01

Full Text Available China is rich in tight sandstone gas resources (“tight gas” for short. For example, the Sulige Gasfield in the Ordos Basin and the Upper Triassic Xujiahe Fm gas reservoir in the Sichuan Basin are typical tight gas reservoirs. In the past decade, tight gas reserve and production both have increased rapidly in China, but tight gas reservoirs are always managed as conventional gas reservoirs without effective fiscal, taxation and policy supports. The potential of sustainable tight gas production increase is obviously restricted. The tight gas development projects represented by the Sulige Gasfield have failed to make profit for a long period, and especially tight gas production has presented a slight decline since 2015. In this paper, a new economic evaluation method was proposed for tight gas development projects. The new method was designed to verify the key parameters (e.g. production decline rate and single-well economic service life depending on tight gas development and production characteristics, and perform the depreciation by using the production method. Furthermore, the possibility that the operation cost may rise due to pressure-boosting production and intermittent opening of gas wells is considered. The method was used for the tight gas development project of Sulige Gasfield, showing that its profit level is much lower than the enterprise's cost level of capital. In order to support a sustainable development of tight gas industry in China, it is recommended that relevant authorities issue value-added tax (VAT refund policy as soon as possible. It is necessary to restore the non-resident gas gate price of the provinces where tight gas is produced to the fair and reasonable level in addition to the fiscal subsidy of CNY0.24/m3, or offer the fiscal subsidy of CNY0.32/m3 directly based on the on-going gate price. With these support policies, tax income is expected to rise directly, fiscal expenditure will not increase, and gas

A Personalized Recommendation-Based Mobile Learning Approach to Improving the Reading Performance of EFL Students

Science.gov (United States)

Hsu, Ching-Kun; Hwang, Gwo-Jen; Chang, Chih-Kai

2013-01-01

In this paper, a personalized recommendation-based mobile language learning approach is proposed. A mobile learning system has been developed based on the approach by providing a reading material recommendation mechanism for guiding EFL (English as Foreign Language) students to read articles that match their preferences and knowledge levels, and a…

Regulations for the safe transport of radioactive material. 1985 ed. Supplement 1988

International Nuclear Information System (INIS)

1988-01-01

A major revision of the Agency's Regulations for the Safe Transport of Radioactive Material, Safety Series No. 6, was undertaken during a period of several years, culminating in the publication of the 1985 Edition. In order to consider minor problems in the new edition, the Agency convened a panel of experts in January 1986. This panel recommended some amendments which were subsequently published as Supplement 1986 to the Regulations. A further review panel meeting took place in June 1987. The amendments which were recommended for early adoption were themselves divided into two kinds. The first of these are designated as minor changes. The second kind of amendment recommended for early adoption comprises actual changes to regulatory provisions. Several changes of this second type were recommended by the panel and are included in this Supplement. The Supplement also contains the amended texts of the supporting documents, Safety Series Nos 7, 37 and 80, which are necessary to correct minor errors as well as to provide complementary information for the changes introduced to the Regulations themselves. In addition, the Supplement embodies the contents of Supplement 1986, which is consequently superseded.

Reading and Vocabulary Recommendations for Spanish for Native Speakers Materials.

Science.gov (United States)

Spencer, Laura Gutierrez

1995-01-01

Focuses on the need for appropriate materials to address the needs of native speakers of Spanish who study Spanish in American universities and high schools. The most important factors influencing the selection of readings should include the practical nature of themes for reading and vocabulary development, level of difficulty, and variety in…

Topical study on IRS events involving foreign material intrusion in plant systems. First issue. Report of a consultants meeting. Working material

International Nuclear Information System (INIS)

1997-01-01

Recent exchange of operational safety experience among countries, within the framework of the IRS, revealed a noticeable increase in incidents involving foreign material intrusion (FMI) in nuclear power plant systems. These incidents appeared to have safety impact, sometimes widespread, on many systems and components, including the reactor core, control rods, the secondary side, and other support systems such as the electrical, air, and water systems. Notwithstanding the economic penalties and the operational problems that can arise from the FMI, many events indicated severe component damages, challenges to safety systems and to fuel integrity. Difficulties encountered with the removal of foreign material present further challenges due to the long term effects of such material remaining in the system and interacting with either fuel cladding, with the potential of releasing fission products in coolant systems, or with the system pressure boundary with the potential for material wear and sudden failure of the pressure boundary. The FMI topic was, therefore, one of a number of topics that was recommended by the TCM in 1996 for investigation. A consultant meeting was held at the IAEA during the period 14-18 April 1997 to address this topic. Figs

Vulnerability and adaptation to climate change in the arctic (VACCA): Implementing recommendations

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

This report provides recommendations for how Norway's government could move forward with the results from the Arctic Council supported VACCA project, suggesting how concrete activities may be implemented and applied to policy and practice. Based on the results of interviews with Arctic peoples and people involved in Arctic work, combined with desk studies of relevant literature, four Arctic contexts are defined within the dividing lines coastal/non-coastal and urban/non-urban. This report provides up to five concrete recommendations within each context, recommendations for cross-contextual action, and specific projects for further research and action.(auth)

Radioactive material packaging performance testing

International Nuclear Information System (INIS)

Romano, T.; Cruse, J.M.

1991-02-01

To provide uniform packaging of hazardous materials on an international level, the United Nations has developed packaging recommendations that have been implemented worldwide. The United Nations packaging recommendations are performance oriented, allowing for a wide variety of package materials and systems. As a result of this international standard, efforts in the United States are being directed toward use of performance-oriented packaging and elimination of specification (designed) packaging. This presentation will focus on trends, design evaluation, and performance testing of radioactive material packaging. The impacts of US Department of Transportation Dockets HM-181 and HM-169A on specification and low-specific activity radioactive material packaging requirements are briefly discussed. The US Department of Energy's program for evaluating radioactive material packings per US Department of Transportation Specification 7A Type A requirements, is used as the basis for discussing low-activity packaging performance test requirements. High-activity package testing requirements are presented with examples of testing performed at the Hanford Site that is operated by Westinghouse Hanford Company for the US Department of Energy. 5 refs., 2 tabs

Promoting Ethylene Selectivity from CO2 Electroreduction on CuO Supported onto CO2 Capture Materials.

Science.gov (United States)

Yang, Hui-Juan; Yang, Hong; Hong, Yu-Hao; Zhang, Peng-Yang; Wang, Tao; Chen, Li-Na; Zhang, Feng-Yang; Wu, Qi-Hui; Tian, Na; Zhou, Zhi-You; Sun, Shi-Gang

2018-03-09

Cu is a unique catalyst for CO 2 electroreduction, since it can catalyze CO 2 reduction to a series of hydrocarbons, alcohols, and carboxylic acids. Nevertheless, such Cu catalysts suffer from poor selectivity. High pressure of CO 2 is considered to facilitate the activity and selectivity of CO 2 reduction. Herein, a new strategy is presented for CO 2 reduction with improved C 2 H 4 selectivity on a Cu catalyst by using CO 2 capture materials as the support at ambient pressure. N-doped carbon (N x C) was synthesized through high-temperature carbonization of melamine and l-lysine. We observed that the CO 2 uptake capacity of N x C depends on both the microporous area and the content of pyridinic N species, which can be controlled by the carbonization temperature (600-800 °C). The as-prepared CuO/N x C catalysts exhibit a considerably higher C 2 H 4 faradaic efficiency (36 %) than CuO supported on XC-72 carbon black (19 %), or unsupported CuO (20 %). Moreover, there is a good linear relationship between the C 2 H 4 faradaic efficiency and CO 2 uptake capacity of the supports for CuO. The local high CO 2 concentration near Cu catalysts, created by CO 2 capture materials, was proposed to increase the coverage of CO intermediate, which is favorable for the coupling of two CO units in the formation of C 2 H 4 . This study demonstrates that pairing Cu catalysts with CO 2 capture supports is a promising approach for designing highly effective CO 2 reduction electrocatalysts. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Material Substitution For The Supporting Frame of Power Tiller With Finite Element Analysis Approach

Directory of Open Access Journals (Sweden)

Midian Shite

2006-08-01

Full Text Available Due to its advantageouse characteristic, aluminum is considered to substitute the existing steel as material of the supporting frame of power tiller to meet the strength and environment concerns. The investigation was emphasized on the comparison of both material in view of stress and deformation. In this study, both experimental test and finite element (FE analysis were employed to meet the research concem.comparison between the experimental test and numerical analysis result indicated acceptable differnces of about 7-33% wich is lower than the previouse research. Substitution with aluminum was confirmed using material index that aluminum has better performance in strength and stiffness than that of steel by prescibing minimum better performance in strength and stiffness than that of steel by prescibing minimum weight. FE analysis result revealed that aluminum model was capable of sustaining loads about equal to the steel model. It was based on its maximum von Mises stress wich was insignificatly lower than the steel model. In term of strength characteristic, strength ratio of the aluminum model was higher than the steel model. Furthemore, the substitution also resulted in redistrubuting stress into wider area and mass reduction for about 36%.

Recommendations for prevention of radiation accident in industrial gammagraphy

International Nuclear Information System (INIS)

Souza, L.S.; Silva, F.C.A. da

2017-01-01

Industrial Gammagraphy plays an important role in the quality control of various materials and components. It is classified by the International Atomic Energy Agency - IAEA as Category 2, due to its radiation risk caused by the use of high activity radioactive sources. This risk is based on the harmful consequences of human health, described in some accidents in the world, due to failures. In 2012, the 'Brazilian National Workshop on Accident Prevention in Industrial Gammagraphy' was carried out by DIAPI/CNEN, with the objective of disseminating knowledge about radiation accidents. At the time, the IRD/CNEN-RJ carried out a survey with the 75 participants using a form with 22 recommendations to prevent radiological accidents, in order to select the 10 most voted. A statistical study, using the 'Frequency Distribution' method, was performed to define 10 recommendations. The percentage and vote results were obtained by category of the participants and the 10 most important recommendations were defined to prevent radiation accidents. The recommendation that came in first place was 'Always use an individual monitor with alarm during all work'

International physical protection standards: support for development and implementation

International Nuclear Information System (INIS)

Soo Hoo, M.S.

2002-01-01

Full text: Since 1972, the IAEA has been a recognized organization in promoting the development of international standards on the physical protection of nuclear materials. This responsibility has continued through the present in the 1999 publication of the fourth revision of INFCIRC/225, the physical protection of nuclear material and nuclear facilities and in being the repository for the convention on the physical protection of nuclear material which was originally published in 1980 as INFCIRC/274. The IAEA has also published other reference documents in support these two standards. With changing world events and greater concern for the physical protection of nuclear materials and facilities, IAEA member states have increased IAEA physical protection responsibilities. Currently, the IAEA is serving as the secretariat for drafting revisions to the physical protection convention. The proposed revisions will strengthen international physical protection standards through the incorporation of physical protection fundamentals that should apply to all nuclear materials in international or domestic use, storage and transport. Furthermore, the physical protection fundamentals would also extend to include nuclear facilities. Presently, the physical protection convention applies only to nuclear materials that are in international transport. To complement efforts to develop and promote international physical protection standards, the IAEA is actively involved in assisting member states with the implementation of the standards. This is accomplished through the delivery of training courses, workshops and hosting other international forums for the exchange of information. Through review services such as the international physical protection advisory service (IPPAS), the IAEA provides advice to member states on the application of international standards at national and facility-specific levels. These services can be followed up with technical support to implement the

Reprint of: Improved cytotoxicity testing of magnesium materials

International Nuclear Information System (INIS)

Fischer, Janine; Pröfrock, Daniel; Hort, Norbert; Willumeit, Regine; Feyerabend, Frank

2011-01-01

Metallic magnesium (Mg) and its alloys are highly suitable for medical applications as biocompatible and biodegradable implant materials. Magnesium has mechanical properties similar to bone, stimulates bone regeneration, is an essential non-toxic element for the human body and degrades completely within the body environment. In consequence, magnesium is a promising candidate as implant material for orthopaedic applications. Protocols using the guideline of current ISO standards should be carefully evaluated when applying them for the characterization of the cytotoxic potential of degradable magnesium materials. For as-cast material we recommend using 10 times more extraction medium than recommended by the ISO standards to obtain reasonable results for reliable cytotoxicity rankings of degradable materials in vitro. In addition primary isolated human osteoblasts or mesenchymal stem cells should be used to test magnesium materials.

Reprint of: Improved cytotoxicity testing of magnesium materials

Energy Technology Data Exchange (ETDEWEB)

Fischer, Janine [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Structural Research on Macromolecules, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Proefrock, Daniel [Helmholtz-Zentrum Geesthacht, Institute for Coastal Research, Department for Marine Bioanalytical Chemistry, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Hort, Norbert [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Magnesium Processing, Max-Planck Str. 1, D - 21502 Geesthacht (Germany); Willumeit, Regine; Feyerabend, Frank [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department for Structural Research on Macromolecules, Max-Planck Str. 1, D - 21502 Geesthacht (Germany)

2011-12-15

Metallic magnesium (Mg) and its alloys are highly suitable for medical applications as biocompatible and biodegradable implant materials. Magnesium has mechanical properties similar to bone, stimulates bone regeneration, is an essential non-toxic element for the human body and degrades completely within the body environment. In consequence, magnesium is a promising candidate as implant material for orthopaedic applications. Protocols using the guideline of current ISO standards should be carefully evaluated when applying them for the characterization of the cytotoxic potential of degradable magnesium materials. For as-cast material we recommend using 10 times more extraction medium than recommended by the ISO standards to obtain reasonable results for reliable cytotoxicity rankings of degradable materials in vitro. In addition primary isolated human osteoblasts or mesenchymal stem cells should be used to test magnesium materials.

Recommended Determination of Region IV Concerning the Yazoo Backwater Area Pumps Project

Science.gov (United States)

This document explains the basis for EPA Region IV’s recommendation to prohibit the specification of certain waters of the United States as a discharge site for dredge site for dredged or fill material.

Long-rod projectiles against oblique targets: analysis and design recommendations

International Nuclear Information System (INIS)

Norris, D.M.; McMaster, W.H.; Wilkins, M.L.

1976-01-01

Computer calculations provide an understanding of impact phenomena associated with long rod penetrators striking targets at oblique angles. The rod and target material behaviors are described by elastic-plastic work-hardening constitutive models. Ductile fracture is simulated by setting all tensile and shear stresses to zero when the calculated plastic deformation reaches a critical value. The important penetration material properties to defeat a given target are identified. There is no single material property of overriding importance; a combination of properties is required for an efficient penetrator. Experimental results are presented to demonstrate the effects of ductility and toughness on penetration performance. Recommendations for possible improvement are suggested

When and how to recommend 'alternative approaches' in the management of high blood pressure.

Science.gov (United States)

Brook, Robert D; Jackson, Elizabeth A; Giorgini, Paolo; McGowan, Cheri L

2015-06-01

Several nonpharmacologic therapies, such as sodium restriction and weight loss, have been promoted by hypertension guidelines based on the trial evidence supporting their capacity to lower blood pressure. However, many patients may not respond or be able to adhere to these nonpharmacologic treatments. Despite numerous formal diet and lifestyle recommendations, the prevalence of hypertension continues to grow worldwide. As such, additional approaches are needed to help combat this public health epidemic. In this review, we outline the evidence supporting the efficacy of a number of alternative approaches for blood pressure lowering. On the basis of the recommendations by a recent American Heart Association scientific statement, we also provide guidance on when and how to implement these methods in clinical practice. The available evidence supports several approaches, including Transcendental Meditation, device-guided slow breathing, and aerobic, resistance, and isometric exercises. Nonetheless, many questions remain, and future recommendations for using alternative approaches will need to be updated as new trials are published. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluation of context-aware recommendation systems for information re-finding

NARCIS (Netherlands)

Sappelli, M.; Verberne, S.; Kraaij, W.

2016-01-01

In this article we evaluate context-aware recommendation systems for information re-finding by knowledge workers. We identify 4 criteria that are relevant for evaluating the quality of knowledge worker support: context relevance, document relevance, prediction of user action, and diversity of the

Universal immunogenicity validation and assessment during early biotherapeutic development to support a green laboratory.

Science.gov (United States)

Bautista, Ami C; Zhou, Lei; Jawa, Vibha

2013-10-01

Immunogenicity support during nonclinical biotherapeutic development can be resource intensive if supported by conventional methodologies. A universal indirect species-specific immunoassay can eliminate the need for biotherapeutic-specific anti-drug antibody immunoassays without compromising quality. By implementing the R's of sustainability (reduce, reuse, rethink), conservation of resources and greener laboratory practices were achieved in this study. Statistical analysis across four biotherapeutics supported identification of consistent product performance standards (cut points, sensitivity and reference limits) and a streamlined universal anti-drug antibody immunoassay method implementation strategy. We propose an efficient, fit-for-purpose, scientifically and statistically supported nonclinical immunogenicity assessment strategy. Utilization of a universal method and streamlined validation, while retaining comparability to conventional immunoassays and meeting the industry recommended standards, provides environmental credits in the scientific laboratory. Collectively, individual reductions in critical material consumption, energy usage, waste and non-environment friendly consumables, such as plastic and paper, support a greener laboratory environment.

Do Nutrient-Based Front-of-Pack Labelling Schemes Support or Undermine Food-Based Dietary Guideline Recommendations? Lessons from the Australian Health Star Rating System.

Science.gov (United States)

Lawrence, Mark A; Dickie, Sarah; Woods, Julie L

2018-01-05

Food-based Dietary Guidelines (FBDGs) promote healthy dietary patterns. Nutrient-based Front-of-Pack Labelling (NBFOPL) schemes rate the 'healthiness' of individual foods. This study aimed to investigate whether the Australian Health Star Rating (HSR) system aligns with the Australian Dietary Guidelines (ADGs). The Mintel Global New Products Database was searched for every new food product displaying a HSR entering the Australian marketplace from 27 June 2014 (HSR system endorsement) until 30 June 2017. Foods were categorised as either a five food group (FFG) food or 'discretionary' food in accordance with ADG recommendations. Ten percent (1269/12,108) of new food products displayed a HSR, of which 57% were FFG foods. The median number of 'health' stars displayed on discretionary foods (2.5; range: 0.5-5) was significantly lower ( p stars across the two food categories was observed, with 56.7% of discretionary foods displaying ≥2.5 stars. The HSR system is undermining the ADG recommendations through facilitating the marketing of discretionary foods. Adjusting the HSR's algorithm might correct certain technical flaws. However, supporting the ADGs requires reform of the HSR's design to demarcate the food source (FFG versus discretionary food) of a nutrient.

Recommendations for waste disposal of phosphorus-32 and iodine-131 for medical users. Handbook 49

Energy Technology Data Exchange (ETDEWEB)

NONE

1951-11-02

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this Handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling, utilization, and disposal of wastes. Comments on those recommendations will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this Handbook lay in the uncertainty regarding permissible radiation exposure levels, particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the subcommittees mentioned above. The best available information on permissible radiation levels and permissible quantities of ingested radioactive material may be found in the Recommendations of the International Commission on Radiological Protection and the Supplement to these recommendations in NBS Handbook 47. It should be borne in mind, however, that even the values given in that Handbook may be subject to change. As the problem of the disposal of radioactive wastes varies over such wide limits, depending upon the usage to which the isotopes are put, the committee has decided that it will not be feasible to incorporate in one volume broad recommendations covering all situations and materials. This is the first of a series of such reports. The present Handbook has been prepared by the Subcommittee on Waste Disposal and

Recommendations for waste disposal of phosphorus-32 and iodine-131 for medical users. Handbook 49

International Nuclear Information System (INIS)

1951-01-01

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this Handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling, utilization, and disposal of wastes. Comments on those recommendations will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this Handbook lay in the uncertainty regarding permissible radiation exposure levels, particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the subcommittees mentioned above. The best available information on permissible radiation levels and permissible quantities of ingested radioactive material may be found in the Recommendations of the International Commission on Radiological Protection and the Supplement to these recommendations in NBS Handbook 47. It should be borne in mind, however, that even the values given in that Handbook may be subject to change. As the problem of the disposal of radioactive wastes varies over such wide limits, depending upon the usage to which the isotopes are put, the committee has decided that it will not be feasible to incorporate in one volume broad recommendations covering all situations and materials. This is the first of a series of such reports. The present Handbook has been prepared by the Subcommittee on Waste Disposal and

Status of nuclear forensic support in Sudan

International Nuclear Information System (INIS)

Mokhtar, Mohammedelmoez Eltayeb Abderahman

2015-08-01

The central problem investigated in this thesis is nuclear forensic support in Sudan, the thesis comprises five chapters, began with an introduction containing the art of forensic science, stated the importance of the it in criminal investigations. The forensic science was defined, and stated the principle of which it underlying, including: principle of individuality and principle of exchange, the divisions of this science has been clarified, then it discussed the crime scene and the collecting of evidence, where starting the forensic science at the crime scene, with clarifying the principle of crime scene investigation. Nuclear and other radioactive material was discussed: defining a radioactivity with the material source. It placed into 3 general categories: special nuclear materials, reactor fuel, and commercial radioactive sources, and mention each category and it characteristics. Radiation is part of our environment was clarified, and discussed what the effect on organisms and populations are. Nuclear forensics was presented,and how problem of the safeguarding of the nuclear material beginning. The emerging nature of the problem was discussed, the radiological crime scene management was explained, importance of securing the scene with an examples of equipment and instruments for on-scene radiation safety assessment and how the collection of evidence, storage forensic laboratory analysis was discussed and how set the designated nuclear forensic laboratory, also nuclear forensic interpretation, and the chain of custody was mentioned. The role of Regulating Authority in Nuclear forensic support was discussed, specifically in Sudan, International Cooperation have also been reminded, as well as memorandum of understanding was mentioned between SNRRA and the administration of forensic evidence, and one of it results is the radiological surveys unit in forensic administration, how the unit is configured, the role of the unit, finally conclusion of research was

Energetic materials research and development activities at Sandia National Laboratories supported under DP-10 programs

Energy Technology Data Exchange (ETDEWEB)

Ratzel, A.C. III

1998-09-01

This report provides summary descriptions of Energetic Materials (EM) Research and Development activities performed at Sandia National Laboratories and funded through the Department of Energy DP-10 Program Office in FY97 and FY98. The work falls under three major focus areas: EM Chemistry, EM Characterization, and EM Phenomenological Model Development. The research supports the Sandia component mission and also Sandia's overall role as safety steward for the DOE Nuclear Weapons Complex.

Titanium Dioxide Supported on Different Porous Materials as Photocatalyst for the Degradation of Methyl Green in Wastewaters

Directory of Open Access Journals (Sweden)

Haithem Bel Hadjltaief

2015-01-01

Full Text Available TiO2 nanoparticles were immobilized on two porous materials used as catalyst supports, namely, activated carbon (AC and natural clay (NC, through an impregnation process using TiO2 (P25 as precursor. The so-prepared composite materials were characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM, transition electron microscopy (TEM, and nitrogen physisorption, that is, Brunauer-Emmett-Teller (BET surface area determination. SEM and TEM observation evidenced that TiO2 was deposited on AC and NC surface. XRD results confirmed that TiO2 existed in a mixture of anatase and rutile phases. The specific surface area of photocatalysts decreased drastically in comparison with the original materials. The photocatalytic activity of these materials was assayed in the oxidation of Methyl Green (MG dye in aqueous medium under UV irradiation. TiO2/AC exhibited higher photocatalytic oxidation activity than TiO2 at neutral pH. Total mineralization of MG was confirmed by means of COD analysis, pointing to these materials as an efficient, cost-effective, and environment friendly alternative for water treatment.

Non-IID Recommender Systems: A Review and Framework of Recommendation Paradigm Shifting

Directory of Open Access Journals (Sweden)

Longbing Cao

2016-06-01

Full Text Available While recommendation plays an increasingly critical role in our living, study, work, and entertainment, the recommendations we receive are often for irrelevant, duplicate, or uninteresting products and services. A critical reason for such bad recommendations lies in the intrinsic assumption that recommended users and items are independent and identically distributed (IID in existing theories and systems. Another phenomenon is that, while tremendous efforts have been made to model specific aspects of users or items, the overall user and item characteristics and their non-IIDness have been overlooked. In this paper, the non-IID nature and characteristics of recommendation are discussed, followed by the non-IID theoretical framework in order to build a deep and comprehensive understanding of the intrinsic nature of recommendation problems, from the perspective of both couplings and heterogeneity. This non-IID recommendation research triggers the paradigm shift from IID to non-IID recommendation research and can hopefully deliver informed, relevant, personalized, and actionable recommendations. It creates exciting new directions and fundamental solutions to address various complexities including cold-start, sparse data-based, cross-domain, group-based, and shilling attack-related issues.

Value of Recommendation Systems for Online Investors

OpenAIRE

Rustam Vahidov; Raafat Saade; Ahmed Eldiwany

2012-01-01

Internet allows investors to use friendly tools which help them to make and implement their investment choices in an online environment. Individuals can have access to volumes of information related to alternative financial instruments and craft their strategies according to their needs and preferences. However, in the presence of multiple choices, investors with limited experience and knowledge may need support in making adequate decisions. Recommendations systems have been used in e-commerc...

Children's sleep needs: is there sufficient evidence to recommend optimal sleep for children?

Science.gov (United States)

Matricciani, Lisa; Blunden, Sarah; Rigney, Gabrielle; Williams, Marie T; Olds, Tim S

2013-04-01

It is widely recognized that sleep is important for children's health and well-being and that short sleep duration is associated with a wide range of negative health outcomes. Recently, there has been much interest in whether or not there are sufficient data to support the specific recommendations made for how much sleep children need. In this article we explore concepts related to children's sleep need, discuss the theory, rationale, and empirical evidence for contemporary sleep recommendations, and outline future research directions for sleep recommendations. If sleep is to be treated as a therapeutic intervention, then consensus guidelines, statements, and evidence-based best-practice documents are needed to underpin sleep recommendations for children.

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA.

Science.gov (United States)

Qamheya, Ala Hassan A; Yeniyol, Sinem; Arısan, Volkan

2015-01-01

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient.

An investigation into carbon nanostructured materials as catalyst support in proton exchange membrane fuel cells

DEFF Research Database (Denmark)

Veltzé, Sune

acid treatment on the Vapour Grown Carbon Fibers™ manufactured by Showa Denko K. K. From these fibres, twelve platinised samples were investigated, of which one was platinised by a platinum phtalocyanine impregnation method, two were platinised by the polyol method and the remaining by the Bönnemann......Polymer electrolyte fuel cells (PEFCs) are among the key research areas concerning clean cost-effective energy. Carbon nano fibres (CNF), single walled carbon nano tubes (SWCNT), multi walled carbon nano tubes (MWCNT) and other related materials are among the possible successors to standard carbon...... black support materials for low platinum containing electrocatalyst. This is partly due to their high electronic conductivity. Partly due to their high surface area needed for the dispersion of nanoparticulate metal-clusters. In addition carbon nano-structures (CNF, SWCNT, MWCNT etc.) are more durable...

BEARING CAPACITY OF A HORIZONTALLY LOADED SINGLE PILE SUPPORT WITH SLEEPERS

Directory of Open Access Journals (Sweden)

Buslov Anatoliy Semenovich

2015-09-01

Full Text Available The supports of a overhead wiring used in transport take up substantial loads both because of wires and constructions holding them and wind, dynamic and other extraordinary impacts. In case of using single-member piles a question about their stability appears. For this reason different sleepers constructions are used. In order to improve the bearing capacity of horizontally loaded single pile supports of the contact systems used in urban, road and rail transport, power lines, etc.., it is recommended to use sleepers as horizontally laid under the ground in the depth of support beams. The calculation methods for different support sleepers of different lengths and cross sections are not well investigated. The proposed calculation method allows determining the carrying capacity of horizontally loaded bearings with soil pieces of different structural dimensions and their location in the soil, which allows choosing the best option for cost and material consumption. The calculations offered by the authors prove the efficiency of sleepers use in order to increase the bearing capacity of horizontally loaded piles and the possibility to chose their size.

[Recommendations for institutional response to an adverse event].

Science.gov (United States)

2016-01-01

The organizational response after an Adverse Event (AE) is critical for the patient recovery and trust restoration in the health system. It is also crucial for the involved caregiver psychological recovery. To design a frame of recommendations to help the healthcare services, institutions and organizations to provide a systematic approach to an AE. A reduced group of authors performed a non-systematic review of the literature and developed an initial draft. The draft was sent to the rest of authors, who suggested modifications in structure, content, references and style throughout successive manuscript versions until a final one was accepted. AE response includes the patient's clinical stabilization and a therapeutic plan to mitigate harm, the safeguard of used materials or health products involved, the appropriate disclosure to patient and family, the support of affected staff and their replacement if needed, the report to appropriate clinical and management heads, the event circumstances documentation and the starting of the AE investigation and analysis. Besides the professional, family and patient's trust and health recovery, the ultimate target of a correct AE response is the improvement of healthcare processes to prevent its repetition considering the AE as a system failure and learning and improving through its analysis. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Flexible and self-powered temperature-pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials

Science.gov (United States)

Zhang, Fengjiao; Zang, Yaping; Huang, Dazhen; di, Chong-An; Zhu, Daoben

2015-09-01

Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature-pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.

A Preliminary Human Rights Analysis of the Working Group Report and Recommendations on Direct Provision

OpenAIRE

Thornton, Liam

2015-01-01

Overall, the Report contains a mix of significant recommendations on the protection process and processing of asylum claims. However, I argue, there are significant concerns with the recommendations that have emerged as regards direct provision accommodation and supports for asylum applicants. The focus of this working paper relates to categorising some of the recommendations contained in the McMahon Report and providing some initial analysis. This analysis is not an exhaustive exploration...

Recommendations for CSF AD biomarkers in the diagnostic evaluation of dementia

DEFF Research Database (Denmark)

Simonsen, Anja Hviid; Herukka, Sanna-Kaisa; Andreasen, Niels

2017-01-01

. The recommendations were developed by a multidisciplinary working group based on the available evidence and consensus from focused discussions for (i) identification of Alzheimer's disease (AD) as the cause of dementia, (ii) prediction of rate of decline, (iii) cost-effectiveness, and (iv) interpretation of results......This article presents recommendations, based on the Grading of Recommendations, Assessment, Development, and Evaluation method, for the clinical application of cerebrospinal fluid (CSF) amyloid-β1-42, tau, and phosphorylated tau in the diagnostic evaluation of patients with dementia....... The working group found sufficient evidence to support a recommendation to use CSF AD biomarkers as a supplement to clinical evaluation, particularly in uncertain and atypical cases, to identify or exclude AD as the cause of dementia. Because of insufficient evidence, it was uncertain whether CSF AD...

Microstructural characterization of material used as supporter in pre hispanic paints

International Nuclear Information System (INIS)

Silva V, Y.; Zorrilla, C.; Canetas, J.; Hernandez, R.; Aguilar F, M.; Arenas A, J.; Martinez, G.

2005-01-01

The aim of this work is to show the characterization of pre hispanic paintings mainly of the materials that support the pigments. The samples come from three different archaeological sites, Palenque-Chiapas (two specimens), Teotihuacan-Estado de Mexico (one specimen) and Mitla-Oaxaca (one specimen); Mayan, Teotihuacan and Mixtec-Zapotec culture respectively. The samples were analyzed by Sem, EDS, Tem, XRD and IR. The results show calcite as common phase for all the samples, however exist other phases identified depending on the site as dolomite, ankerite, calcium silicon chloride, etc. The origin of the red color of the analyzed pigments were cinnabar (HgS) by a sample of Palenque and hematite (Fe 2 O 3 ) by the other specimen, this last crystalline phase also present in the Mitla and Teotihuacan samples. By IR were identified some organic compounds in all the samples, but not copal. (Author)

Waste Handling Shaft concrete liner degradation conclusions and recommendations

International Nuclear Information System (INIS)

1992-10-01

The primary function of the Waste Handling Shaft (WHS) at the Waste Isolation Pilot Plant (WIPP) is to permit the transfer of radioactive waste from the surface waste handling building to the underground storage area. It also serves as an intake shaft for small volumes of air during normal storage operations and as an emergency escape route. Part of the construction was the placement of a concrete liner and steel reinforced key in 1984. During a routine shaft inspection in May 1990, some degradation of the WHS concrete liner was observed between the depths of 800 and 900 feet below the ground surface. Detailed investigations of the liner had been carried out by Sandia National Laboratories and by Westinghouse Electric Corporation Waste Isolation Division (WID) through Lankard Materials Laboratory. Observations, reports, and data support the conclusion that the concrete degradation, resulting from attack by chemically aggressive brine, is a localized phenomena. It is the opinion of the WID that the degradation is not considered an immediate or near term concern; this is supported by technical experts. WID recommendations have been made which, when implemented, will ensure an extended liner life. Based on the current assessment of available data and the proposed shaft liner monitoring program described in this report, it is reasonable to assume that the operational life of the concrete shaft liner can safely support the 25-year life of the WIPP. Analysis of data indicates that degradation of the shaft's concrete liner is attributed to chemically aggressive brine seeping through construction joints and shrinkage cracks from behind the liner in and around the 834-foot depth. Chemical and mechanical components of concrete degradation have been identified. Chemical attack is comprised of several stages of concrete alteration. The other component, mechanical degradation, results from the expansive forces of crystals forming in the concrete pore space

Material report in support to RCC-MRX code 2010 stainless steel parts and products

International Nuclear Information System (INIS)

Ancelet, Olivier; Lebarbe, Thierry; Dubiez-Le Goff, Sophie; Bonne, Dominique; Gelineau, Odile

2012-01-01

This paper presents the Material Report dedicated to stainless steels parts and products issued by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-Nucleaires) in support to RCC-MRx 2010 Code. The RCC-MRx Code is the result of the merger of the RCC-MX 2008, developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007, which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER (a presentation of RCC-MRx 2010 Code is the subject of another paper proposed in this Congress; it explains in particular the status of this Code). This Material Report is part of a set of Criteria of RCC-MRx (this set of Criteria is under construction). The Criteria aim at explaining the design and construction rules of the Code. They cover analyses rules as well as part procurement, welding, methods of tests and examination and fabrication rules. The Material Report particularly provides justifications and explanations on requirements and features dealing with parts and products proposed in the Code. The Material Report contains the following information: Introduction of the grade(s): codes and standards and Reference Procurement Specifications covering parts and products, applications and experience gained, - Physical properties, - Mechanical properties used for design calculations (base metal and welds): basic mechanical properties, creep mechanical properties, irradiated mechanical properties, - Fabrication: experience gained, metallurgy, - Welding: weldability, experience gained during welding and repair procedure qualifications, - Non-destructive examination, - In-service behaviour. In the article, examples of data supplied in the Material Report dedicated to stainless steels will be exposed. (authors)

Context-aware recommender system based on ontology for recommending tourist destinations at Bandung

Science.gov (United States)

Rizaldy Hafid Arigi, L.; Abdurahman Baizal, Z. K.; Herdiani, Anisa

2018-03-01

Recommender System is software that is able to provide personalized recommendation suits users’ needs. Recommender System has been widely implemented in various domains, including tourism. One approach that can be done for more personalized recommendations is the use of contextual information. This paper proposes a context aware recommender based ontology system in the tourism domain. The system is capable of recommending tourist destinations by using user preferences of the categories of tourism and contextual information such as user locations, weather around tourist destinations and close time of destination. Based on the evaluation, the system has accuracy of of 0.94 (item recommendation precision evaluated by expert) and 0.58 (implicitly from system-end user interaction). Based on the evaluation of user satisfaction, the system provides a satisfaction level of more than 0.7 (scale 0 to 1) for speed factors for providing liked recommendations (PE), informative description of recommendations (INF) and user trust (TR).

Recommended Best Practices for the Characterization of Storage Properties of Hydrogen Storage Materials

Energy Technology Data Exchange (ETDEWEB)

None

2010-03-01

This is a reference guide to common methodologies and protocols for measuring critical performance properties of advanced hydrogen storage materials. It helps users to communicate clearly the relevant performance properties of new materials as they are discovered and tested.

Personalized Resource Recommendations using Learning from Positive and Unlabeled Examples

Directory of Open Access Journals (Sweden)

Priyank Thakkar

2016-08-01

Full Text Available This paper proposes a novel approach for recommending social resources using learning from positive and unlabeled examples. Bookmarks submitted on social bookmarking system delicious1 and artists on online music system last.fm2 are considered as social resources. The foremost feature of this problem is that there are no labeled negative resources/examples available for learning a recommender/classifier. The memory based collaborative filtering has served as the most widely used algorithm for social resource recommendation. However, its predictions are based on some ad hoc heuristic rules and its success depends on the availability of a critical mass of users. This paper proposes model based two-step techniques to learn a classifier using positive and unlabeled examples to address personalized resource recommendations. In the first step of these techniques, naïve Bayes classifier is employed to identify reliable negative resources. In the second step, to generate effective resource recommender, classification and regression tree and least square support vector machine (LS-SVM are exercised. A direct method based on LS-SVM is also put forward to realize the recommendation task. LS-SVM is customized for learning from positive and unlabeled data. Furthermore, the impact of feature selection on our proposed techniques is also studied. Memory based collaborative filtering as well as our proposed techniques exploit usage data to generate personalized recommendations. Experimental results show that the proposed techniques outperform existing method appreciably.

Nuclear health and safety. Status of GAO's environmental, safety, and health recommendations to DOE

International Nuclear Information System (INIS)

England-Joseph, Judy; Bannerman, Carl J.; Fenzel, William F.; Brack, David L.; Harter, Frederick A.

1990-04-01

DOE's operations are carried out at many contractor-operated sites around the country, including major sites within the nuclear weapons complex that are involved in the production of nuclear material for weapons and naval fuel. At these sites DOE contractors routinely use and generate large quantities of a wide range of hazardous and radioactive materials. Because these materials require special handling by workers. Also pursuant to Mar. 15, 1989, request, we provided you a report entitled Nuclear Health and Safety: Need for Improved Responsiveness to Problems at DOE Sites (GAO/RCED-90-101, Mar. 28, 1990). to prevent exposure to themselves or releases into the environment, DOE's weapons complex, considered in its entirety, is among the potentially more dangerous industrial operations in the world. Over the last decade, at the request of the Congress, we have carried out a series of assessments and evaluations of various aspects of the complex. In over 60 reports and testimonies published since 1990, we have called attention to the mounting problems facing DOE's nuclear weapons complex. This body of work includes (1) identifying serious, costly, and widespread environmental, safety, and health problems at DOE facilities, (2) calling for outside independent oversight of DOE's nuclear operations, and (3) making recommendations to DOE to strengthen its oversight, providing more detailed information and plans to the Congress, and improving its management and accounting practices. In total, our reports and testimonies have included 54 recommendations to DOE, in addition to recommendations to the Congress, concerning environmental, safety, and health matters at the complex. We consider 23 of the 54 recommendations to be still open. The open recommendations call for improvements such as tighter program controls and clearer standards and policies related to environmental, safety, and health matters

Lifestyle change recommendations in major depression: Do they work?

Science.gov (United States)

Serrano Ripoll, M J; Oliván-Blázquez, B; Vicens-Pons, E; Roca, M; Gili, M; Leiva, A; García-Campayo, J; Demarzo, M P; García-Toro, M

2015-09-01

Modifying some lifestyle factors can be useful in depression, at least as an adjuvant treatment. Combining different lifestyle interventions seems to be an adequate strategy to increase their antidepressant efficacy according with preliminary studies, but this issue has not been enough investigated. The present study is a randomized, double-blinded, multicentre, two arm-parallel clinical trials, with a 12 month follow-up. The sample consisted of 273 Primary Care patients. Four combined hygienic-dietary written recommendations were given to the patients about diet, exercise, light exposure and sleep hygiene. Both active and control interventions were associated with improvement on BDI (Beck Depression Inventory) scores. However, there were not statistically significant differences (7.0 vs. 7.6; p=0.594). We were unable to monitor whether patients carry out recommendations. Intervention could be too difficult to accomplish for depressed patients without enough support and supervision. Just giving written lifestyle recommendations are not enough for depressive patients to benefit from them, so perhaps lifestyle change recommendations work or do not work on Depression depending on how they are presented to patients and on monitoring systems of their implementation. Copyright © 2015 Elsevier B.V. All rights reserved.

Container materials for isolation of radioactive waste in salt

International Nuclear Information System (INIS)

Streicher, M.A.; Andrews, A.

1987-10-01

The workshop reviewed the extensive data on the corrosion resistance of low-carbon steel in simulated salt repository environments, determined whether these data were sufficient to recommend low-carbon steel for fabrication of the container, and assessed the suitability of other materials under consideration in the SRP. The panelists determined the need for testing and research programs, recommended experimental approaches, and recommended materials based on existing technology. On the first day of the workshop, presentations were made on waste package requirements; the expected corrosion environment; degradation processes, including a review of data from corrosion tests on carbon steel; and rationales for container design and materials, modeling studies, and planned future work. The second day was devoted to a panel caucus, presentation of workshop findings, and open discussion. 76 refs., 2 figs., 3 tabs

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA

Directory of Open Access Journals (Sweden)

Ala Hassan A. Qamheya

2015-01-01

Full Text Available Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC material in teeth construction to rehabilitate a complete denture wearer patient.

Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility

Energy Technology Data Exchange (ETDEWEB)

Olinger, Becky D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Moran, Jesse S. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Shelley, Timothy J. [Air Force Research Lab. (AFRL), Tyndall AFB, FL (United States); Whinnery, LeRoy L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whipple, Richard E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kashgarian, Michaele [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-01-14

Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have been consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.

A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

International Nuclear Information System (INIS)

Dias, Fabio C.; Mason, Peter

2013-01-01

A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards authorities

A measurement evaluation program to support nuclear material control and accountability measurements in Brazilian laboratories

Energy Technology Data Exchange (ETDEWEB)

Dias, Fabio C., E-mail: fabio@ird.gov.br [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil); Mason, Peter, E-mail: peter.mason@ch.doe.gov [New Brunswick Laboratory (DOE/NBL), Argonne, IL (United States)

2013-07-01

A measurement evaluation program (MEP) is one of a number of valuable tools that analytical chemists can use to ensure that the data produced in the laboratory are fit for their intended purpose and consistent with expected performance values at a given time. As such, participation in a MEP is an important indicator of the quality of analytical data, and is recognized as such by independent regulatory and/or accreditation bodies. With the intent to implement such a program in Brazil, in November 2012 the Nuclear Energy Commission of Brazil (CNEN), with support from the Department of Energy of the United States' (US-DOE International Safeguards and Engagement Program), decided to initiate a technical cooperation project aiming at organizing a Safeguards Measurement Evaluation Program (SMEP) for Brazilian facilities. The project, entitled Action Sheet 23, was formalized under the terms of the Agreement between the US-DOE and the CNEN concerning research and development in nuclear material control, accountancy, verification, physical protection, and advanced containment and surveillance technologies for International Safeguards Applications. The work, jointly performed by the CNEN's Safeguards Laboratory (LASAL) and the New Brunswick Laboratory (NBL), has the objective to strengthen the traceability of accountability measurements and ensure adequate quality of safeguards measurements for facilities within Brazil, utilizing test samples characterized and provided by NBL. Recommendations to participants included measurement frequency, number of results per sample and format for reporting results using ISO methods for calculating and expressing measurement uncertainties. In this paper, we discuss the main steps taken by CNEN and NBL aiming at implementing such a program and the expected results, in particular the impact of uncertainty estimation on the evaluation of performance of each participant laboratory. The program is considered by Brazilian safeguards

A recommendation module to help teachers build courses through the Moodle Learning Management System

Science.gov (United States)

Limongelli, Carla; Lombardi, Matteo; Marani, Alessandro; Sciarrone, Filippo; Temperini, Marco

2016-01-01

In traditional e-learning, teachers design sets of Learning Objects (LOs) and organize their sequencing; the material implementing the LOs could be either built anew or adopted from elsewhere (e.g. from standard-compliant repositories) and reused. This task is applicable also when the teacher works in a system for personalized e-learning. In this case, the burden actually increases: for instance, the LOs may need adaptation to the system, through additional metadata. This paper presents a module that gives some support to the operations of retrieving, analyzing, and importing LOs from a set of standard Learning Objects Repositories, acting as a recommending system. In particular, it is designed to support the teacher in the phases of (i) retrieval of LOs, through a keyword-based search mechanism applied to the selected repositories; (ii) analysis of the returned LOs, whose information is enriched by a concept of relevance metric, based on both the results of the searching operation and the data related to the previous use of the LOs in the courses managed by the Learning Management System; and (iii) LO importation into the course under construction.

Business Processes Modeling Recommender Systems: User Expectations and Empirical Evidence

Directory of Open Access Journals (Sweden)

Michael Fellmann

2018-04-01

Full Text Available Recommender systems are in widespread use in many areas, especially electronic commerce solutions. In this contribution, we apply recommender functionalities to business process modeling and investigate their potential for supporting process modeling. To do so, we have implemented two prototypes, demonstrated them at a major fair and collected user feedback. After analysis of the feedback, we have confronted the findings with the results of the experiment. Our results indicate that fairgoers expect increased modeling speed as the key advantage and completeness of models as the most unlikely advantage. This stands in contrast to an initial experiment revealing that modelers, in fact, increase the completeness of their models when adequate knowledge is presented while time consumption is not necessarily reduced. We explain possible causes of this mismatch and finally hypothesize on two “sweet spots” of process modeling recommender systems.

Evaluation and additional recommendations for preparing a whole blood control material

Directory of Open Access Journals (Sweden)

Nilda E. Fink

1998-04-01

Full Text Available OBJECTIVE: The assessment of an easy to prepare and low cost control material for Hematology, available for manual and automated methods. MATERIAL AND METHOD: Aliquots of stabilized whole blood were prepared by partial fixation with aldehydes; the stability at different temperatures (4. 20 and 37 °C during periods of up to 8-9 weeks and aliquot variability with both methods were controlled. RESULTS: Aliquot variability with automated methods at day 1, expressed as CV% (coefficient of variation was: white blood cells (WBC 2.7, red blood cells (RBC 0.7, hemoglobin (Hb 0.6, hematocrit (Hct 0.7, mean cell volume (MCV 0.3, mean cell hemoglobin (MCH 0.6, mean cell hemoglobin concentration (MCHC 0.7, and platelets (PLT 4.6. The CV (coefficient of variation percentages obtained with manual methods in one of the batches were: WBC 23, Hct 2.8, Hb 4.5, MCHC 5.9, PLT 41. Samples stored at 4ºC and 20ºC showed good stability, only a very low initial hemolysis being observed, whereas those stored at 37ºC deteriobed a rapidly (metahemoglobin formation, aggregation of WBC and platelets, as well as alteration of erythrocyte indexes. CONCLUSIONS: It was confirmed that, as long as there is no exposure to high temperatures during distribution, this material is stable, allowing assessment, both esternal and internal, for control purposes, with acceptable reproductivity, both for manual and auttomatic methods.

Radioactive material packaging performance testing

International Nuclear Information System (INIS)

Romano, T.

1992-06-01

In an effort to provide uniform packaging of hazardous material on an international level, recommendations for the transport of dangerous goods have been developed by the United Nations. These recommendations are performance oriented and contrast with a large number of packaging specifications in the US Department of Transportation's hazard materials regulations. This dual system presents problems when international shipments enter the US Department of Transportation's system. Faced with the question of continuing a dual system or aligning with the international system, the Research and Special Programs Administration of the US Department of Transportation responded with Docket HM-181. This began the transition toward the international transportation system. Following close behind is Docket HM-169A, which addressed low specific activity radioactive material packaging. This paper will discuss the differences between performance-oriented and specification packaging, the transition toward performance-oriented packaging by the US Department of Transportation, and performance-oriented testing of radioactive material packaging by Westinghouse Hanford Company. Dockets HM-181 and HM-169A will be discussed along with Type A (low activity) and Type B (high activity) radioactive material packaging evaluations

Data Collection Handbook to Support Modeling Impacts of Radioactive Material in Soil and Building Structures

Energy Technology Data Exchange (ETDEWEB)

Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Cheng [Argonne National Lab. (ANL), Argonne, IL (United States); Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-01

This handbook is an update of the 1993 version of the Data Collection Handbook and the Radionuclide Transfer Factors Report to support modeling the impact of radioactive material in soil. Many new parameters have been added to the RESRAD Family of Codes, and new measurement methodologies are available. A detailed review of available parameter databases was conducted in preparation of this new handbook. This handbook is a companion document to the user manuals when using the RESRAD (onsite) and RESRAD-OFFSITE code. It can also be used for RESRAD-BUILD code because some of the building-related parameters are included in this handbook. The RESRAD (onsite) has been developed for implementing U.S. Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), crops and livestock, human intake, source characteristic, and building characteristic parameters are used in the RESRAD (onsite) code. The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code and can also model the transport of radionuclides to locations outside the footprint of the primary contamination. This handbook discusses parameter definitions, typical ranges, variations, and measurement methodologies. It also provides references for sources of additional information. Although this handbook was developed primarily to support the application of RESRAD Family of Codes, the discussions and values are valid for use of other pathway analysis models and codes.

Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements, 2nd edition

Energy Technology Data Exchange (ETDEWEB)

None, None

2004-12-01

This document provides recommendations for the Department of Energy’s (DOE’s) preparation of environmental assessments and environmental impact statements under the National Environmental Policy Act of 1969 (NEPA). The Office of NEPA Policy and Compliance prepared these recommendations in consultation with the Office of the Assistant General Counsel for Environment and following coordination with the DOE NEPA Community. The recommendations should materially aid those responsible for preparing and reviewing NEPA documents to focus on significant environmental issues, adequately analyze environmental impacts, and effectively present the analysis to decisionmakers and the public. The recommendations are not all-encompassing, however; preparers must apply independent judgment to determine the appropriate scope and analytical requirements of NEPA for each proposal. These recommendations do not constitute legal requirements, but are intended to enhance compliance with existing NEPA regulations (40 CFR Parts 1500-1508, 10 CFR Part 1021).

International survey of research university leadership views on supporting open access scholarly & educational materials

CERN Document Server

2017-01-01

This report looks closely at the attitudes on open access of a sample of 314 deans, chancellors, department chairmen, research institute directors, provosts, trustees, vice presidents and other upper level administrators from more than 50 research universities in the USA, Canada, the UK, Ireland and Australia. The report gives detailed information on what they think of the cost of academic journal subscriptions, and how they understand the meaning of the term “open access.” The study also gives highly detailed data on what kind of policies the research university elite support or might support in the area of open access, including policies such as restricting purchases of very high-priced journals, paying publication fees for open access publications, mandating deposit of university scholarship into digital repositories, and developing open access educational materials from university resources. Just a few of the report’s many findings are that: • The lowest percentage of those interviewed considering...

Safe transport of radioactive material. 3. ed

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-12-01

The IAEA has developed a standardized approach to transport safety training as a means of helping Member States to implement the Transport Regulations. The training manual is an anchor of this standardized approach to training: it contains all the topics presented in the sequential order recommended by the IAEA for the student to gain a thorough understanding of the body of knowledge that is needed to ensure that radioactive material ranked as Class 7 in the United Nations' nomenclature for dangerous goods - is transported safely. The explanations in the text refer, where needed, to the appropriate requirements in the IAEA's Transport Regulations; additional useful information is also provided. Thus, the training manual in addition to the Transport Regulations and their supporting documents is used by the IAEA as the basis for delivering all of its training courses on the safe transport of radioactive material. Enclosed with the training manual is a CD-ROM that contains the text of the manual as well as the visual aids that are used at the IAEA's training courses. The following topics are covered: review of radioactivity and radiation; review of radiation protection principles; regulatory terminology; basic safety concepts: materials and packages; activity limits and material restrictions; selection of optimal package type; test procedures: material and packages; requirements for transport; control of material in transport; fissile material: regulatory requirements and operational aspects; quality assurance; national competent authority; additional regulatory constraints for transport; international liability and insurance; emergency planning and preparedness; training; services provided by the IAEA.

Safe transport of radioactive material. 3. ed

International Nuclear Information System (INIS)

2002-01-01

The IAEA has developed a standardized approach to transport safety training as a means of helping Member States to implement the Transport Regulations. The training manual is an anchor of this standardized approach to training: it contains all the topics presented in the sequential order recommended by the IAEA for the student to gain a thorough understanding of the body of knowledge that is needed to ensure that radioactive material ranked as Class 7 in the United Nations' nomenclature for dangerous goods - is transported safely. The explanations in the text refer, where needed, to the appropriate requirements in the IAEA's Transport Regulations; additional useful information is also provided. Thus, the training manual in addition to the Transport Regulations and their supporting documents is used by the IAEA as the basis for delivering all of its training courses on the safe transport of radioactive material. Enclosed with the training manual is a CD-ROM that contains the text of the manual as well as the visual aids that are used at the IAEA's training courses. The following topics are covered: review of radioactivity and radiation; review of radiation protection principles; regulatory terminology; basic safety concepts: materials and packages; activity limits and material restrictions; selection of optimal package type; test procedures: material and packages; requirements for transport; control of material in transport; fissile material: regulatory requirements and operational aspects; quality assurance; national competent authority; additional regulatory constraints for transport; international liability and insurance; emergency planning and preparedness; training; services provided by the IAEA

Summary of the materials breakout group

Energy Technology Data Exchange (ETDEWEB)

Garner, F. [Pacific Northwest Laboratories, Richland, WA (United States); Sommer, W. [Los Alamos National Laboratory, NM (United States)

1995-10-01

This breakout group discussed the following topics and reached a number of recommendations summarized in this report. The topics of discussion included (1) a comparison of expected materials response at spallation sources to experience with fission reactors; (2) synergistic effects from high-energy particle radiation, corrosion, and cyclic stresses; (3) estimates, based on experience with materials developed for fission and fusion reactors, for -materials testing needs; - facilities for materials development, both available and needed; - candidate materials; - time frame for material qualification; and - expected program costs.

Analysis and recommendations for DPA calculations in SiC

International Nuclear Information System (INIS)

Heinisch, H.L.

1998-01-01

Recent modeling results, coupled with the implications of available experimental results, provide sufficient information to achieve consensus on the values of threshold displacement energies to use in displacements per atom (DPA) calculations. The values recommended here, 20 eV for C and 35 eV for Si, will be presented for adoption by the international fusion materials community at the next IEA SiC/SiC workshop

Derivatized graphitic nanofibres (GNF) as a new support material for mass spectrometric analysis of peptides and proteins.

Science.gov (United States)

Greiderer, Andreas; Rainer, Matthias; Najam-ul-Haq, Muhammad; Vallant, Rainer M; Huck, Christian W; Bonn, Günther K

2009-07-01

Graphitic nanofibres (GNFs), 100-200 nm in diameter and 5-20 microm in length have been modified in order to yield different affinities (Cu2+ and Fe3+ loaded immobilized metal affinity chromatography (IMAC) as well as cation and anion exchange materials) for the extraction of a range of biomolecules by their inherited hydrophobicity and the hydrophilic chemical functionalities, obtained by derivatization. Modified GNFs have for the first time been employed as carrier materials for protein profiling in material-enhanced laser desorption/ionization (MELDI) for the enrichment and screening of biofluids. For that purpose, the derivatized GNF materials have comprehensively been characterized regarding surface area, structural changes during derivatization, IMAC, as well as ion exchange and protein-loading capacity and recovery. GNF derivatives revealed high protein-binding capacity (2,000 microg ml(-1) for insulin) and ideal sensitivities, resulting in a detection limit of 50 fmol microl(-1) (for insulin), which is crucial for the detection of low abundant species in biological samples. Compared to other MELDI carrier materials, sensitivity was enhanced on GNF derivatives, which might be ascribed to the fact that GNFs support desorption and ionization mechanisms and by absorbing laser energy in addition to matrix.

Develop Improved Materials to Support the Hydrogen Economy

Energy Technology Data Exchange (ETDEWEB)

Dr. Michael C. Martin

2012-07-18

The Edison Materials Technology Center (EMTEC) solicited and funded hydrogen infrastructure related projects that have a near term potential for commercialization. The subject technology of each project is related to the US Department of Energy hydrogen economy goals as outlined in the multi-year plan titled, 'Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan.' Preference was given to cross cutting materials development projects that might lead to the establishment of manufacturing capability and job creation. The Edison Materials Technology Center (EMTEC) used the US Department of Energy hydrogen economy goals to find and fund projects with near term commercialization potential. An RFP process aligned with this plan required performance based objectives with go/no-go technology based milestones. Protocols established for this program consisted of a RFP solicitation process, white papers and proposals with peer technology and commercialization review (including DoE), EMTEC project negotiation and definition and DoE cost share approval. Our RFP approach specified proposals/projects for hydrogen production, hydrogen storage or hydrogen infrastructure processing which may include sensor, separator, compression, maintenance, or delivery technologies. EMTEC was especially alert for projects in the appropriate subject area that have cross cutting materials technology with near term manufacturing and commercialization opportunities.

Recommendation in evolving online networks

Science.gov (United States)

Hu, Xiao; Zeng, An; Shang, Ming-Sheng

2016-02-01

Recommender system is an effective tool to find the most relevant information for online users. By analyzing the historical selection records of users, recommender system predicts the most likely future links in the user-item network and accordingly constructs a personalized recommendation list for each user. So far, the recommendation process is mostly investigated in static user-item networks. In this paper, we propose a model which allows us to examine the performance of the state-of-the-art recommendation algorithms in evolving networks. We find that the recommendation accuracy in general decreases with time if the evolution of the online network fully depends on the recommendation. Interestingly, some randomness in users' choice can significantly improve the long-term accuracy of the recommendation algorithm. When a hybrid recommendation algorithm is applied, we find that the optimal parameter gradually shifts towards the diversity-favoring recommendation algorithm, indicating that recommendation diversity is essential to keep a high long-term recommendation accuracy. Finally, we confirm our conclusions by studying the recommendation on networks with the real evolution data.

Strategy Guideline. Advanced Construction Documentation Recommendations for High Performance Homes

Energy Technology Data Exchange (ETDEWEB)

Lukachko, A. [Building Science Corporation, Somerville, MA (United States); Gates, C. [Building Science Corporation, Somerville, MA (United States); Straube, J. [Building Science Corporation, Somerville, MA (United States)

2011-12-01

As whole house energy efficiency increases, new materials and new systems require greater coordination and communication between industry stakeholders. This report presents four changes that are recommended to achieve improvements in energy efficiency, durability and health in Building America houses: create coordination drawings, improve specifications, improve detail drawings, and review drawings and prepare a Quality Control Plan.

Action to Support Practices Implement Research Evidence (ASPIRE): protocol for a cluster-randomised evaluation of adaptable implementation packages targeting 'high impact' clinical practice recommendations in general practice.

Science.gov (United States)

Willis, Thomas A; Hartley, Suzanne; Glidewell, Liz; Farrin, Amanda J; Lawton, Rebecca; McEachan, Rosemary R C; Ingleson, Emma; Heudtlass, Peter; Collinson, Michelle; Clamp, Susan; Hunter, Cheryl; Ward, Vicky; Hulme, Claire; Meads, David; Bregantini, Daniele; Carder, Paul; Foy, Robbie

2016-02-29

There are recognised gaps between evidence and practice in general practice, a setting which provides particular challenges for implementation. We earlier screened clinical guideline recommendations to derive a set of 'high impact' indicators based upon criteria including potential for significant patient benefit, scope for improved practice and amenability to measurement using routinely collected data. We aim to evaluate the effectiveness and cost-effectiveness of a multifaceted, adaptable intervention package to implement four targeted, high impact recommendations in general practice. The research programme Action to Support Practice Implement Research Evidence (ASPIRE) includes a pair of pragmatic cluster-randomised trials which use a balanced incomplete block design. Clusters are general practices in West Yorkshire, United Kingdom (UK), recruited using an 'opt-out' recruitment process. The intervention package adapted to each recommendation includes combinations of audit and feedback, educational outreach visits and computerised prompts with embedded behaviour change techniques selected on the basis of identified needs and barriers to change. In trial 1, practices are randomised to adapted interventions targeting either diabetes control or risky prescribing and those in trial 2 to adapted interventions targeting either blood pressure control in patients at risk of cardiovascular events or anticoagulation in atrial fibrillation. The respective primary endpoints comprise achievement of all recommended target levels of haemoglobin A1c (HbA1c), blood pressure and cholesterol in patients with type 2 diabetes, a composite indicator of risky prescribing, achievement of recommended blood pressure targets for specific patient groups and anticoagulation prescribing in patients with atrial fibrillation. We are also randomising practices to a fifth, non-intervention control group to further assess Hawthorne effects. Outcomes will be assessed using routinely collected data

Nano-Scale Au Supported on Carbon Materials for the Low Temperature Water Gas Shift (WGS Reaction

Directory of Open Access Journals (Sweden)

Paula Sánchez

2011-12-01

Full Text Available Au-based catalysts supported on carbon materials with different structures such as graphite (G and fishbone type carbon nanofibers (CNF-F were prepared using two different methods (impregnation and gold-sol to be tested in the water gas shift (WGS reaction. Atomic absorption spectrometry, transmission electron microscopy (TEM, temperature-programmed oxidation (TPO, X-ray diffraction (XRD, Raman spectroscopy, elemental analyses (CNH, N2 adsorption-desorption analysis, temperature-programmed reduction (TPR and temperature-programmed decomposition were employed to characterize both the supports and catalysts. Both the crystalline nature of the carbon supports and the method of gold incorporation had a strong influence on the way in which Au particles were deposited on the carbon surface. The higher crystallinity and the smaller and well dispersed Au particle size were, the higher activity of the catalysts in the WGS reaction was noted. Finally, catalytic activity showed an important dependence on the reaction temperature and steam-to-CO molar ratio.

Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air.

Science.gov (United States)

Jin, Yifei; Liu, Chengcheng; Chai, Wenxuan; Compaan, Ashley; Huang, Yong

2017-05-24

Three dimensional (3D) bioprinting technology enables the freeform fabrication of complex constructs from various hydrogels and is receiving increasing attention in tissue engineering. The objective of this study is to develop a novel self-supporting direct hydrogel printing approach to extrude complex 3D hydrogel composite structures in air without the help of a support bath. Laponite, a member of the smectite mineral family, is investigated to serve as an internal scaffold material for the direct printing of hydrogel composite structures in air. In the proposed printing approach, due to its yield-stress property, Laponite nanoclay can be easily extruded through a nozzle as a liquid and self-supported after extrusion as a solid. Its unique crystal structure with positive and negative charges enables it to be mixed with many chemically and physically cross-linked hydrogels, which makes it an ideal internal scaffold material for the fabrication of various hydrogel structures. By mixing Laponite nanoclay with various hydrogel precursors, the hydrogel composites retain their self-supporting capacity and can be printed into 3D structures directly in air and retain their shapes before cross-linking. Then, the whole structures are solidified in situ by applying suitable cross-linking stimuli. The addition of Laponite nanoclay can effectively improve the mechanical and biological properties of hydrogel composites. Specifically, the addition of Laponite nanoclay results in a significant increase in the Young's modulus of each hydrogel-Laponite composite: 1.9-fold increase for the poly(ethylene glycol) diacrylate (PEGDA)-Laponite composite, 7.4-fold increase for the alginate-Laponite composite, and 3.3-fold increase for the gelatin-Laponite composite.

A Geospatial Data Recommender System based on Metadata and User Behaviour

Science.gov (United States)

Li, Y.; Jiang, Y.; Yang, C. P.; Armstrong, E. M.; Huang, T.; Moroni, D. F.; Finch, C. J.; McGibbney, L. J.

2017-12-01

Earth observations are produced in a fast velocity through real time sensors, reaching tera- to peta- bytes of geospatial data daily. Discovering and accessing the right data from the massive geospatial data is like finding needle in the haystack. To help researchers find the right data for study and decision support, quite a lot of research focusing on improving search performance have been proposed including recommendation algorithm. However, few papers have discussed the way to implement a recommendation algorithm in geospatial data retrieval system. In order to address this problem, we propose a recommendation engine to improve discovering relevant geospatial data by mining and utilizing metadata and user behavior data: 1) metadata based recommendation considers the correlation of each attribute (i.e., spatiotemporal, categorical, and ordinal) to data to be found. In particular, phrase extraction method is used to improve the accuracy of the description similarity; 2) user behavior data are utilized to predict the interest of a user through collaborative filtering; 3) an integration method is designed to combine the results of the above two methods to achieve better recommendation Experiments show that in the hybrid recommendation list, the all the precisions are larger than 0.8 from position 1 to 10.

Characterization of cement-based ancient building materials in support of repository seal materials studies

International Nuclear Information System (INIS)

Roy, D.M.; Langton, C.A.

1983-12-01

Ancient mortars and plasters collected from Greek and Cypriot structures dating to about 5500 BC have been investigated because of their remarkable durability. The characteristics and performance of these and other ancient cementitious materials have been considered in the light of providing information on longevity of concrete materials for sealing nuclear waste geological repositories. The matrices of these composite materials have been characterized and classified into four categories: (1) gypsum cements; (2) hydraulic hydrated lime and hydrated-lime cements; (3) hydraulic aluminous and ferruginous hydrated-lime cements (+- siliceous components); and (4) pozzolana/hydrated-lime cements. Most of the materials investigated, including linings of ore-washing basins and cisterns used to hold water, are in categories (2) and (3). The aggregates used included carbonates, sandstones, shales, schists, volcanic and pyroclastic rocks, and ore minerals, many of which represent host rock types of stratigraphic components of a salt repository. Numerous methods were used to characterize the materials chemically, mineralogically, and microstructurally and to elucidate aspects of both the technology that produced them and their response to the environmental exposure throughout their centuries of existence. Their remarkable properties are the result of a combination of chemical (mineralogical) and microstructural factors. Durability was found to be affected by matrix mineralogy, particle size and porosity, and aggregate type, grading, and proportioning, as well as method of placement and exposure conditions. Similar factors govern the potential for durability of modern portland cement-containing materials, which are candidates for repository sealing. 29 references, 29 figures, 6 tables