WorldWideScience

Sample records for support document tsd

  1. Draft federal GHG accounting and reporting : technical support document

    Science.gov (United States)

    2010-07-01

    This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

  2. Technical Support Document for Version 3.6.1 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2009-09-29

    This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  3. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  4. Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

    2009-09-01

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  5. Technical Support Document: 50% Energy Savings for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Huang, Yunzhi; Lane, Michael D.; Liu, Bing

    2010-04-30

    The Technical Support Document (TSD) for 50% energy savings in small office buildings documents the analysis and results for a recommended package of energy efficiency measures (EEMs) referred to as the advanced EEMs. These are changes to a building design that will reduce energy usage. The package of advanced EEMs achieves a minimum of 50% energy savings and a construction area weighted average energy savings of 56.6% over the ANSI/ASHRAE/IESNA Standard 90.1-2004 for 16 cities which represent the full range of climate zones in the United States. The 50% goal is for site energy usage reduction. The weighted average is based on data on the building area of construction in the various climate locations. Cost-effectiveness of the EEMs is determined showing an average simple payback of 6.7 years for all 16 climate locations. An alternative set of results is provided which includes a variable air volume HVAC system that achieves at least 50% energy savings in 7 of the 16 climate zones with a construction area weighted average savings of 48.5%. Other packages of EEMs may also achieve 50% energy savings; this report does not consider all alternatives but rather presents at least one way to reach the goal. Design teams using this TSD should follow an integrated design approach and utilize additional analysis to evaluate the specific conditions of a project.

  6. B Plant treatment, storage, and disposal (TSD) units inspection plan

    International Nuclear Information System (INIS)

    Beam, T.G.

    1996-01-01

    This inspection plan is written to meet the requirements of WAC 173-303 for operations of a TSD facility. Owners/operators of TSD facilities are required to inspection their facility and active waste management units to prevent and/or detect malfunctions, discharges and other conditions potentially hazardous to human health and the environment. A written plan detailing these inspection efforts must be maintained at the facility in accordance with Washington Administrative Code (WAC), Chapter 173-303, ''Dangerous Waste Regulations'' (WAC 173-303), a written inspection plan is required for the operation of a treatment, storage and disposal (TSD) facility and individual TSD units. B Plant is a permitted TSD facility currently operating under interim status with an approved Part A Permit. Various operational systems and locations within or under the control of B Plant have been permitted for waste management activities. Included are the following TSD units: Cell 4 Container Storage Area; B Plant Containment Building; Low Level Waste Tank System; Organic Waste Tank System; Neutralized Current Acid Waste (NCAW) Tank System; Low Level Waste Concentrator Tank System. This inspection plan complies with the requirements of WAC 173-303. It addresses both general TSD facility and TSD unit-specific inspection requirements. Sections on each of the TSD units provide a brief description of the system configuration and the permitted waste management activity, a summary of the inspection requirements, and details on the activities B Plant uses to maintain compliance with those requirements

  7. TSD-DOSE : a radiological dose assessment model for treatment, storage, and disposal facilities

    International Nuclear Information System (INIS)

    Pfingston, M.

    1998-01-01

    In May 1991, the U.S. Department of Energy (DOE), Office of Waste Operations, issued a nationwide moratorium on shipping slightly radioactive mixed waste from DOE facilities to commercial treatment, storage, and disposal (TSD) facilities. Studies were subsequently conducted to evaluate the radiological impacts associated with DOE's prior shipments through DOE's authorized release process under DOE Order 5400.5. To support this endeavor, a radiological assessment computer code--TSD-DOSE (Version 1.1)--was developed and issued by DOE in 1997. The code was developed on the basis of detailed radiological assessments performed for eight commercial hazardous waste TSD facilities. It was designed to utilize waste-specific and site-specific data to estimate potential radiological doses to on-site workers and the off-site public from waste handling operations at a TSD facility. The code has since been released for use by DOE field offices and was recently used by DOE to evaluate the release of septic waste containing residual radioactive material to a TSD facility licensed under the Resource Conservation and Recovery Act. Revisions to the code were initiated in 1997 to incorporate comments received from users and to increase TSD-DOSE's capability, accuracy, and flexibility. These updates included incorporation of the method used to estimate external radiation doses from DOE's RESRAD model and expansion of the source term to include 85 radionuclides. In addition, a detailed verification and benchmarking analysis was performed

  8. Technical Support Document for Version 3.4.0 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2007-09-14

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  9. Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan; McBride, M.; Liu, Bing

    2008-09-30

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).

  10. Technical Support Document for Version 3.9.0 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, R. G.; Richman, Eric E.; Schultz, Ralph W.; Winiarski, David W.

    2011-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.

  11. Technical Support Document: Strategies for 50% Energy Savings in Large Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Leach, M.; Lobato, C.; Hirsch, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document (TSD) documents technical analysis that informs design guidance for designing and constructing large office buildings that achieve 50% net site energy savings over baseline buildings defined by minimal compliance with respect to ANSI/ASHRAE/IESNA Standard 90.1-2004. This report also represents a step toward developing a methodology for using energy modeling in the design process to achieve aggressive energy savings targets. This report documents the modeling and analysis methods used to identify design recommendations for six climate zones that capture the range of U.S. climate variability; demonstrates how energy savings change between ASHRAE Standard 90.1-2007 and Standard 90.1-2004 to determine baseline energy use; uses a four-story 'low-rise' prototype to analyze the effect of building aspect ratio on energy use intensity; explores comparisons between baseline and low-energy building energy use for alternate energy metrics (net source energy, energy emissions, and energy cost); and examines the extent to which glass curtain construction limits achieve energy savings by using a 12-story 'high-rise' prototype.

  12. Technical Support Document for Version 3.9.1 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2012-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.

  13. Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jarnagin, Ronald E.; Liu, Bing; Winiarski, David W.; McBride, Merle F.; Suharli, L.; Walden, D.

    2006-11-30

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with

  14. Hanford Site Wide Transportation Safety Document [SEC 1 Thru 3

    Energy Technology Data Exchange (ETDEWEB)

    MCCALL, D L

    2002-06-01

    This safety evaluation report (SER) documents the basis for the US Department of Energy (DOE), Richland Operations Office (RL) to approve the Hanford Sitewide Transportation Safety Document (TSD) for onsite Transportation and Packaging (T&P) at Hanford. Hanford contractors, on behalf of DOE-RL, prepared and submitted the Hanford Sitewide Transportation Safety Document, DOE/RL-2001-0036, Revision 0, (DOE/RL 2001), dated October 4, 2001, which is referred to throughout this report as the TSD. In the context of the TSD, Hanford onsite shipments are the activities of moving hazardous materials, substances, and wastes between DOE facilities and over roadways where public access is controlled or restricted and includes intra-area and inter-area movements. The TSD sets forth requirements and standards for onsite shipment of radioactive and hazardous materials and wastes within the confines of the Hanford Site on roadways where public access is restricted by signs, barricades, fences, or other means including road closures and moving convoys controlled by Hanford Site security forces.

  15. NPL deletion policy for RCRA-regulated TSD facilities finalized

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Under a new policy published by EPA on March 20, 1995, certain sites may be deleted from the National Priorities List (NPL) and deferred to RCRA corrective action. To be deleted from the NPL, a site must (1) be regulated under RCRA as a treatment, storage, or disposal (TSD) facility and (2) meet the four criteria specified by EPA. The new NPL deletion policy, which does not pertain to federal TSD facilities, became effective on April 19, 1995. 1 tab

  16. TSD-DOSE: A radiological dose assessment model for treatment, storage, and disposal facilities

    International Nuclear Information System (INIS)

    Pfingston, M.; Arnish, J.; LePoire, D.; Chen, S.-Y.

    1998-01-01

    Past practices at US Department of Energy (DOE) field facilities resulted in the presence of trace amounts of radioactive materials in some hazardous chemical wastes shipped from these facilities. In May 1991, the DOE Office of Waste Operations issued a nationwide moratorium on shipping all hazardous waste until procedures could be established to ensure that only nonradioactive hazardous waste would be shipped from DOE facilities to commercial treatment, storage, and disposal (TSD) facilities. To aid in assessing the potential impacts of shipments of mixed radioactive and chemically hazardous wastes, a radiological assessment computer model (or code) was developed on the basis of detailed assessments of potential radiological exposures and doses for eight commercial hazardous waste TSD facilities. The model, called TSD-DOSE, is designed to incorporate waste-specific and site-specific data to estimate potential radiological doses to on-site workers and the off-site public from waste-handling operations at a TSD facility. The code is intended to provide both DOE and commercial TSD facilities with a rapid and cost-effective method for assessing potential human radiation exposures from the processing of chemical wastes contaminated with trace amounts of radionuclides

  17. Transportation Safety Excellence in Operations Through Improved Transportation Safety Document

    International Nuclear Information System (INIS)

    Dr. Michael A. Lehto; MAL

    2007-01-01

    A recent accomplishment of the Idaho National Laboratory (INL) Materials and Fuels Complex (MFC) Nuclear Safety analysis group was to obtain DOE-ID approval for the inter-facility transfer of greater-than-Hazard-Category-3 quantity radioactive/fissionable waste in Department of Transportation (DOT) Type A drums at MFC. This accomplishment supported excellence in operations through safety analysis by better integrating nuclear safety requirements with waste requirements in the Transportation Safety Document (TSD); reducing container and transport costs; and making facility operations more efficient. The MFC TSD governs and controls the inter-facility transfer of greater-than-Hazard-Category-3 radioactive and/or fissionable materials in non-DOT approved containers. Previously, the TSD did not include the capability to transfer payloads of greater-than-Hazard-Category-3 radioactive and/or fissionable materials using DOT Type A drums. Previous practice was to package the waste materials to less-than-Hazard-Category-3 quantities when loading DOT Type A drums for transfer out of facilities to reduce facility waste accumulations. This practice allowed operations to proceed, but resulted in drums being loaded to less than the Waste Isolation Pilot Plant (WIPP) waste acceptance criteria (WAC) waste limits, which was not cost effective or operations friendly. An improved and revised safety analysis was used to gain DOE-ID approval for adding this container configuration to the MFC TSD safety basis. In the process of obtaining approval of the revised safety basis, safety analysis practices were used effectively to directly support excellence in operations. Several factors contributed to the success of MFC's effort to obtain approval for the use of DOT Type A drums, including two practices that could help in future safety basis changes at other facilities. (1) The process of incorporating the DOT Type A drums into the TSD at MFC helped to better integrate nuclear safety

  18. Fish with thermolabile sex determination (TSD) as models to study brain sex differentiation.

    Science.gov (United States)

    Blázquez, Mercedes; Somoza, Gustavo M

    2010-05-01

    As fish are ectothermic animals, water temperature can affect their basic biological processes such as larval development, growth and reproduction. Similar to reptiles, the incubation temperature during early phases of development is capable to modify sex ratios in a large number of fish species. This phenomenon, known as thermolabile sex determination (TSD) was first reported in Menidia menidia, a species belonging to the family Atherinopsidae. Since then, an increasing number of fish have also been found to exhibit TSD. Traditionally, likewise in reptiles, several TSD patterns have been described in fish, however it has been recently postulated that only one, females at low temperatures and males at high temperatures, may represent the "real" or "true" TSD. Many studies regarding the influence of temperature on the final sex ratios have been focused on the expression and activity of gonadal aromatase, the enzyme involved in the conversion of androgens into estrogens and encoded by the cyp19a1a gene. In this regard, teleost fish, may be due to a whole genome duplication event, produce another aromatase enzyme, commonly named brain aromatase, encoded by the cyp19a1b gene. Contrary to what has been described in other vertebrates, fish exhibit very high levels of aromatase activity in the brain and therefore they synthesize high amounts of neuroestrogens. However, its biological significance is still not understood. In addition, the mechanism whereby temperature can induce the development of a testis or an ovary still remains elusive. In this context the present review is aimed to discuss several theories about the possible role of brain aromatase using fish as models. The relevance of brain aromatase and therefore of neuroestrogens as the possible cue for gonadal differentiation is raised. In addition, the possible role of brain aromatase as the way to keep the high levels of neurogenesis in fish is also considered. Several key examples of how teleosts and aromatase

  19. 76 FR 3133 - Science Advisory Board Staff Office; Notification of a Public Teleconference of the Science...

    Science.gov (United States)

    2011-01-19

    ... document (TSD), Methods and Approaches for Deriving Numeric Criteria for Nitrogen/Phosphorus Pollution in Florida's Estuaries, Coastal Waters, and Southern Inland Flowing Waters. The draft TSD describes methods... discuss its draft report reviewing EPA's technical support document on development of numeric nutrient...

  20. Time Spent per delta PASI (TSdP) among psoriasis patients undergoing UVB-therapy

    DEFF Research Database (Denmark)

    Ring, Hans Christian; Vinding, Gabrielle Randskov; Miller, Iben Marie

    2015-01-01

    the PASI score by one. RESULTS: Seventeen (68%) of the participants needed less than 300 min to lower the PASI with one score. The rest (n = 7 (32%)) used more than 300 min to lower the PASI score by one. Thus, the TSdP distribution displayed two peaks; >regression...

  1. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  2. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  3. Does pedagogical documentation support maternal reminiscing conversations?

    Directory of Open Access Journals (Sweden)

    Bethany Fleck

    2015-12-01

    Full Text Available When parents talk with their children about lessons learned in school, they are participating in reminiscing of an unshared event. This study sought to understand if pedagogical documentation, from the Reggio Approach to early childhood education, would support and enhance the conversation. Mother–child dyads reminisced two separate times about preschool lessons, one time with documentation available to them and one time without. Transcripts were coded extracting variables indicative of high and low maternal reminiscing styles. Results indicate that mother and child conversation characteristics were more highly elaborative when documentation was present than when it was not. In addition, children added more information to the conversation supporting the notion that such conversations enhanced memory for lessons. Documentation could be used as a support tool for conversations and children’s memory about lessons learned in school.

  4. Life Support Baseline Values and Assumptions Document

    Science.gov (United States)

    Anderson, Molly S.; Ewert, Michael K.; Keener, John F.

    2018-01-01

    The Baseline Values and Assumptions Document (BVAD) provides analysts, modelers, and other life support researchers with a common set of values and assumptions which can be used as a baseline in their studies. This baseline, in turn, provides a common point of origin from which many studies in the community may depart, making research results easier to compare and providing researchers with reasonable values to assume for areas outside their experience. This document identifies many specific physical quantities that define life support systems, serving as a general reference for spacecraft life support system technology developers.

  5. Project W-320, 241-C-106 sluicing supporting documentation bibliography

    International Nuclear Information System (INIS)

    Bailey, J.W.

    1998-01-01

    This supporting document has been prepared to make the listing of documentation used to develop, or in support of Project W-320, readily retrievable. All documents are sorted by document number and list the document type. Tank 241-C-106 has been included on the High Heat Load Watch List

  6. 76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2011-10-26

    ...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

  7. Certification/enforcement analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    Industry compliance with minimum energy efficiency standards will be assured through a two-part program approach of certification and enforcement activities. The technical support document (TSD) presents the analyses upon which the proposed rule for assuring that consumer product comply with applicable energy efficiency standards is based. Much of the TSD is based upon support provided DOE by Vitro Laboratories. The OAO Corporation provided additional support in the development of the sampling plan incorporated in the proposed rule. Vitro's recommended approach to appliance certification and enforcement, developed after consideration of various program options, benefits, and impacts, establishes the C/E program framework, general criteria, and procedures for assuring a specified level of energy efficiency performance of covered consumer products. The results of the OAO analysis are given in Volume II of the TSD.

  8. Achieving IT-supported standardized nursing documentation through participatory design

    DEFF Research Database (Denmark)

    Rasmussen, Stine Loft; Lyng, Karen Marie; Jensen, Sanne

    2012-01-01

    that support guideline-based highly structured standard documentation in a large organization with many stakeholders. Applying a participatory design (PD) approach at many organizational levels has involved the stakeholders actively in the design process. Developing a set of design principles has concurrently......In the Capital Region of Denmark a full-scale pilot project on IT-supported nursing documentation is - after running for two months at one full university hospital - showing promising results. In this paper we discuss participatory design as a method to design clinical documentation templates...

  9. 75 FR 66759 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory...

    Science.gov (United States)

    2010-10-29

    ... TSD will describe methods and approaches for developing numeric nutrient criteria for Florida's... support document on development of numeric nutrient criteria for Florida's estuarine and coastal waters...

  10. Clinical decision support improves quality of telephone triage documentation--an analysis of triage documentation before and after computerized clinical decision support.

    Science.gov (United States)

    North, Frederick; Richards, Debra D; Bremseth, Kimberly A; Lee, Mary R; Cox, Debra L; Varkey, Prathibha; Stroebel, Robert J

    2014-03-20

    Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS can improve documentation, further study is needed

  11. Computer Support for Document Management in the Danish Central Government

    DEFF Research Database (Denmark)

    Hertzum, Morten

    1995-01-01

    Document management systems are generally assumed to hold a potential for delegating the recording and retrieval of documents to professionals such as civil servants and for supporting the coordination and control of work, so-called workflow management. This study investigates the use and organiz......Document management systems are generally assumed to hold a potential for delegating the recording and retrieval of documents to professionals such as civil servants and for supporting the coordination and control of work, so-called workflow management. This study investigates the use...... and organizational impact of document management systems in the Danish central government. The currently used systems unfold around the recording of incoming and outgoing paper mail and have typically not been accompanied by organizational changes. Rather, document management tends to remain an appendix...... to the primary work and be delegated to a specialized organizational unit. Several factors contribute to the present document management practices, for example it takes an extraordinary effort to achieve the benefits, and few institutions are forced to pursue them. Furthermore, document and workflow management...

  12. Work-Life Issues and Participation in Education and Training: Support Document

    Science.gov (United States)

    Skinner, Natalie

    2009-01-01

    This document serves as a support paper to the "Work-Life Issues and Participation in Education and Training" report. This support document contains tables that show: (1) participation in education and training; (2) participation in education and training and work-life interaction; (3) future participation in education or training; (4) perceptions…

  13. Electric Generation Ownership, Market Concentration and Auction Size

    Science.gov (United States)

    In this Technical Support Document (TSD), EPA explains in more detail the issues and analyses completed for the alternative remedy of State Budgets/Intrastate Trading described in the proposed Transport Rule preamble in section V.D.5.

  14. A maintenance support system with document handling capability

    International Nuclear Information System (INIS)

    Fukumoto, A.; Tsumura, K.; Fujii, M.; Tai, I.; Makimo, M.; Watanabe, T.

    1990-01-01

    An operation and maintenance support system, called 'Advanced Man-Machine System for Nuclear Power Plants' (MMS-NPP) is under development with the support of the Japanese Government. Taking full advantage of Artificial Intelligence technology, the system aims to enhance the capability of already developed 'Computerized Operator Support System (COSS)' and gives wider and more advanced support for operation and maintenance. With a brief overview of MMS-NPP, this paper describes a support system for plant patrol and equipment inspection. The system gives guidance for plant patrol and for equipment inspection and provides easy access to plant drawings and documents. A unique knowledge acquisition method, utilizing image processing technology, was proposed in building the system

  15. Stress analysis of piping systems and piping supports. Documentation

    International Nuclear Information System (INIS)

    Rusitschka, Erwin

    1999-01-01

    The presentation is focused on the Computer Aided Tools and Methods used by Siemens/KWU in the engineering activities for Nuclear Power Plant Design and Service. In the multi-disciplinary environment, KWU has developed specific tools to support As-Built Documentation as well as Service Activities. A special application based on Close Range Photogrammetry (PHOCAS) has been developed to support revamp planning even in a high level radiation environment. It comprises three completely inter-compatible expansion modules - Photo Catalog, Photo Database and 3D-Model - to generate objects which offer progressively more utilization and analysis options. To support the outage planning of NPP/CAD-based tools have been developed. The presentation gives also an overview of the broad range of skills and references in: Plant Layout and Design using 3D-CAD-Tools; evaluation of Earthquake Safety (Seismic Screening); Revamps in Existing Plants; Inter-disciplinary coordination of project engineering and execution fields; Consulting and Assistance; Conceptual Studies; Stress Analysis of Piping Systems and Piping Supports; Documentation; Training and Supports in CAD-Design, etc. All activities are performed to the greatest extent possible using proven data-processing tools. (author)

  16. ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

    Directory of Open Access Journals (Sweden)

    Milan Eric

    2010-12-01

    Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

  17. New Evidence: Data Documenting Parental Support for Earlier Sexuality Education

    Science.gov (United States)

    Barr, Elissa M.; Moore, Michele J.; Johnson, Tammie; Forrest, Jamie; Jordan, Melissa

    2014-01-01

    Background: Numerous studies document support for sexuality education to be taught in high school, and often, in middle school. However, little research has been conducted addressing support for sexuality education in elementary schools. Methods: As part of the state Behavioral Risk Factor Surveillance System (BRFSS) Survey administration, the…

  18. 41 CFR 302-17.10 - Claims for payment and supporting documentation and verification.

    Science.gov (United States)

    2010-07-01

    ... supporting documentation and verification. 302-17.10 Section 302-17.10 Public Contracts and Property... INCOME TAX (RIT) ALLOWANCE § 302-17.10 Claims for payment and supporting documentation and verification..., net earnings (or loss) from self-employment income shown on attached Schedule SE (Form 1040): Form(s)W...

  19. Face/core mixed mode debond fracture toughness characterization using the modified TSD test method

    DEFF Research Database (Denmark)

    Berggreen, Christian; Quispitupa, Amilcar; Costache, Andrei

    2014-01-01

    The modified tilted sandwich debond (TSD) test method is used to examine face/core debond fracture toughness of sandwich specimens with glass/polyester face sheets and PVC H45 and H100 foam cores over a large range of mode-mixities. The modification was achieved by reinforcing the loaded face sheet....... The fracture process was inspected visually during and after testing. For specimens with H45 core the crack propagated in the core. For specimens with an H100 core, the crack propagated between the resin-rich layer and the face sheet. © The Author(s) 2013 Reprints and permissions: sagepub...... with a steel bar, and fracture testing of the test specimens was conducted over a range of tilt angles. The fracture toughness exhibited mode-mixity phase angle dependence, especially for mode II dominated loadings; although, the fracture toughness remained quite constant for mode I dominated crack loadings...

  20. The OSU1/QUA2/TSD2-encoded putative methyltransferase is a critical modulator of carbon and nitrogen nutrient balance response in Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Peng Gao

    2008-01-01

    Full Text Available The balance between carbon (C and nitrogen (N nutrients must be tightly coordinated so that cells can optimize their opportunity for metabolism, growth and development. However, the C and N nutrient balance perception and signaling mechanism remains poorly understood. Here, we report the isolation and characterization of two allelic oversensitive to sugar 1 mutants (osu1-1, osu1-2 in Arabidopsis thaliana. Using the cotyledon anthocyanin accumulation and root growth inhibition assays, we show that the osu1 mutants are more sensitive than wild-type to both of the imbalanced C/N conditions, high C/low N and low C/high N. However, under the balanced C/N conditions (low C/low N or high C/high N, the osu1 mutants have similar anthocyanin levels and root lengths as wild-type. Consistently, the genes encoding two MYB transcription factors (MYB75 and MYB90 and an Asn synthetase isoform (ASN1 are strongly up-regulated by the OSU1 mutation in response to high C/low N and low C/high N, respectively. Furthermore, the enhanced sensitivity of osu1-1 to high C/low N with respect to anthocyanin accumulation but not root growth inhibition can be suppressed by co-suppression of MYB75, indicating that MYB75 acts downstream of OSU1 in the high C/low N imbalance response. Map-based cloning reveals that OSU1 encodes a member of a large family of putative methyltransferases and is allelic to the recently reported QUA2/TSD2 locus identified in genetic screens for cell-adhesion-defective mutants. Accumulation of OSU1/QUA2/TSD2 transcript was not regulated by C and N balance, but the OSU1 promoter was slightly more active in the vascular system. Taken together, our results show that the OSU1/QUA2/TSD2-encoded putative methyltransferase is required for normal C/N nutrient balance response in plants.

  1. Safe Transport of Radioactive Material, International Regulations and its Supporting Documents

    International Nuclear Information System (INIS)

    El-Shinawy, R.M.K.

    2005-01-01

    Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1 ( ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series No 7 and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series No 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS=113), compliance assurance (SS=112), the training manual and other

  2. Safe Transport of Radioactive Material, International Regulations and its Supporting Documents

    Energy Technology Data Exchange (ETDEWEB)

    El-Shinawy, R M.K. [Radiation Protection Dept., NRC, Atomic Energy Authority, Cairo (Egypt)

    2005-04-01

    Safe transport of radioactive material regulations issued by IAEA since 1961, provide standards for insuring a high level of safety of people,transport workers, property and environment against radiation, contamination and criticality hazards as well as thermal effects associated with the transport of the radioactive wastes and material. The history ,development, philosophy and scope of these international regulations were mentioned as well as the different supporting documents to the regulations for safe transport of radioactive material were identified.The first supporting document , namely TS - G-1.1 ( ST-2) ,Advisory material is also issued by the IAEA.It contains both the advisory and explanatory materials previously published in safety series No 7 and 37 and therefore TS-G-1.1 (ST-2) will supersede safety series No 7 and 37. The second supporting document namely TS-G-1.2 (ST-3), planning and preparing for emergency response to transport accidents involving radioactive material ,which will supersede safety series No 87. In addition to quality assurance (SS=113), compliance assurance (SS=112), the training manual and other.

  3. 15 CFR 748.9 - Support documents for license applications.

    Science.gov (United States)

    2010-01-01

    ... licensing action, since end-uses and other considerations are important factors in the decision making... promptly notifying BIS of any change in the facts contained in the support document that comes to your attention. (h) Effect on license application review. BIS reserves the right in all respects to determine to...

  4. 75 FR 32984 - Policy on the Retention of Supporting Documents and the Use of Electronic Mobile Communication...

    Science.gov (United States)

    2010-06-10

    ...-0168] Policy on the Retention of Supporting Documents and the Use of Electronic Mobile Communication... changes regarding the retention of supporting documents and the use of electronic mobile communication... electronic mobile communication/tracking records to be supporting documents, as they record the time, date...

  5. Design support document for the K Basins Vertical Fuel Handling Tools

    International Nuclear Information System (INIS)

    Bridges, A.E.

    1995-01-01

    The purpose of this document is to provide the design support information for the Vertical Fuel Handling Tools, developed for the removal of N Reactor fuel elements from their storage canisters in the K Basins storage pool and insertion into the Single Fuel Element Can for subsequent shipment to a Hot Cell for examination. Examination of these N Reactor fuel elements is part of the overall characterization effort. These new hand tools are required since previous fuel movement has involved grasping the fuel in a horizontal position. These tools are required to lift an element vertically from the storage canister. Additionally, a Mark II storage canister Lip Seal Protector was designed and fabricated for use during fuel retrieval. This device was required to prevent damage to the canister lip should a fuel element accidentally be dropped during its retrieval, using the handling tools. Supporting documentation for this device is included in this document

  6. Supporting Fieldwork Learning by Visual Documentation and Reflection

    DEFF Research Database (Denmark)

    Saltofte, Margit

    2017-01-01

    Photos can be used as a supplements to written fieldnotes and as a sources for mediating reflection during fieldwork and analysis. As part of a field diary, photos can support the recall of experiences and a reflective distance to the events. Photography, as visual representation, can also lead...... to reflection on learning and knowledge production in the process of learning how to conduct fieldwork. Pictures can open the way for abstractions and hidden knowledge, which might otherwise be difficult to formulate in words. However, writing and written field notes cannot be fully replaced by photos...... the role played by photos in their learning process. For students, photography is an everyday documentation form that can support their memory of field experience and serve as a vehicle for the analysis of data. The article discusses how photos and visual representations support fieldwork learning...

  7. [Development of a medical equipment support information system based on PDF portable document].

    Science.gov (United States)

    Cheng, Jiangbo; Wang, Weidong

    2010-07-01

    According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

  8. Hanford Site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Ellefson, M.D.

    1998-01-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities

  9. 76 FR 33181 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

    Science.gov (United States)

    2011-06-08

    ... aging and wine aging operations. EPA's technical support document (TSD) has more information about this...) emissions from brandy and wine aging operations. We are approving a local rule that regulates [[Page 33182... 4695 Brandy Aging and Wine Aging 09/17/09 05/17/10 Operations. On June 8, 2010, EPA determined that the...

  10. Large Hospital 50% Energy Savings: Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Studer, D.; Parker, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document documents the technical analysis and design guidance for large hospitals to achieve whole-building energy savings of at least 50% over ANSI/ASHRAE/IESNA Standard 90.1-2004 and represents a step toward determining how to provide design guidance for aggressive energy savings targets. This report documents the modeling methods used to demonstrate that the design recommendations meet or exceed the 50% goal. EnergyPlus was used to model the predicted energy performance of the baseline and low-energy buildings to verify that 50% energy savings are achievable. Percent energy savings are based on a nominal minimally code-compliant building and whole-building, net site energy use intensity. The report defines architectural-program characteristics for typical large hospitals, thereby defining a prototype model; creates baseline energy models for each climate zone that are elaborations of the prototype models and are minimally compliant with Standard 90.1-2004; creates a list of energy design measures that can be applied to the prototype model to create low-energy models; uses industry feedback to strengthen inputs for baseline energy models and energy design measures; and simulates low-energy models for each climate zone to show that when the energy design measures are applied to the prototype model, 50% energy savings (or more) are achieved.

  11. Characterization of mixed waste for shipment to TSD Facilities Program

    International Nuclear Information System (INIS)

    Chandler, K.; Goyal, K.

    1995-01-01

    In compliance with the Federal Facilities Compliance Agreement, Los Alamos National Laboratory (LANL) is striving to ship its low-level mixed waste (LLMW) off-site for treatment and disposal. In order to ship LLMW off site to a commercial facility, LANL must request exemption from the DOE Order 5820.2A requirement that LLMW be shipped only to Department of Energy facilities. Because the process of obtaining the required information and approvals for a mixed waste shipment campaign can be very expensive, time consuming, and frustrating, a well-planned program is necessary to ensure that the elements for the exemption request package are completed successfully the first time. LANL has developed such a program, which is cost- effective, quality-driven, and compliance-based. This program encompasses selecting a qualified analytical laboratory, developing a quality project-specific sampling plan, properly sampling liquid and solid wastes, validating analytical data, documenting the waste characterization and decision processes, and maintaining quality records. The products of the program are containers of waste that meet the off-site facility's waste acceptance criteria, a quality exemption request package, documentation supporting waste characterization, and overall quality assurance for the process. The primary goal of the program is to provide an avenue for documenting decisions, procedures, and data pertinent to characterizing waste and preparing it for off-site treatment or disposal

  12. Hanford facility dangerous waste Part A, Form 3 and Part B permit application documentation, Central Waste Complex (WA7890008967)(TSD: TS-2-4)

    Energy Technology Data Exchange (ETDEWEB)

    Saueressig, D.G.

    1998-05-20

    The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating, treatment, storage, and/or disposal units, such as the Central Waste Complex (this document, DOE/RL-91-17). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the U.S. Environmental Protection Agency (40 Code of Federal Regulations 270), with additional information needed by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the Central Waste Complex permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents section. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Wherever appropriate, the Central Waste Complex permit application documentation makes cross-reference to the General Information Portion, rather than duplicating text. Information provided in this Central Waste Complex permit application documentation is current as of May 1998.

  13. Documenting the evolution of the relationship between the pharmacy support workforce and pharmacists to support patient care

    NARCIS (Netherlands)

    Koehler, Tamara; Brown, A.

    Since 2009 there has been a focus on the relationship between pharmacy technicians, pharmacy support workforce cadres and pharmacists in the literature. 2009e2011 saw a framework of role evolution develop, with publications from 2012 to 2015 documenting further maturity in the development of

  14. 76 FR 5537 - Electronic On-Board Recorders and Hours of Service Supporting Documents

    Science.gov (United States)

    2011-02-01

    ... supporting documents influence driver operational safety rather than vehicular and mechanical safety... generate greater traffic congestion than a crash involving a CMV transporting other cargoes. Although these...

  15. A decision support system for the reading of ancient documents

    DEFF Research Database (Denmark)

    Roued-Cunliffe, Henriette

    2011-01-01

    The research presented in this thesis is based in the Humanities discipline of Ancient History and begins by attempting to understand the interpretation process involved in reading ancient documents and how this process can be aided by computer systems such as Decision Support Systems (DSS...... this process in the five areas: remembering complex reasoning, searching huge datasets, international collaboration, publishing editions, and image enhancement. This research contains a large practical element involving the development of a DSS prototype. The prototype is used to illustrate how a DSS......, by remembering complex reasoning, can aid the process of interpretation that is reading ancient documents. It is based on the idea that the interpretation process goes through a network of interpretation. The network of interpretation illustrates a recursive process where scholars move between reading levels...

  16. GNEP Material Transportation, Storage and Disposal Analysis FY-08 Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Halsey, W

    2009-01-15

    This report provides a summary for FY-2008 of activities, analyses and products from the Material Transportation, Storage and Disposal (M-TSD) sub-task of Systems Analysis within the Advanced Fuel Cycle Research & Development area of the Global Nuclear Energy Partnership. The objective of this work is to evaluate near-term material management requirements for initial GNEP facilities and activities, long-term requirements for large-scale GNEP technology deployment, and alternatives and paths forward to meet these needs. For FY-08, the work expanded to include the Integrated Waste Management Strategy as well as integration with the newly formed Waste Forms Campaign. The M-TSD team was expanded with the addition of support from Savannah River National Lab (SRNL) to the existing team of Lawrence Livermore National Lab (LLNL), Argonne National Lab (ANL), Idaho National Lab (INL), Sandia National Lab (SNL) and University of Nevada - Reno (UN-R). During the first half of the year, analysis was focused on providing supporting technical analysis and documentation to support anticipated high-level decisions on program direction. A number of analyses were conducted and reports prepared as program deliverables. This work is briefly summarized in this report. Analyses provided informally to other program efforts are included in this report to provide documentation. This year-end summary was planned primarily as a compilation of activities following the anticipated programmatic decisions. These decisions were deferred beyond the end of the year, and funds were reallocated in a number of areas, thus reducing the M-TSD activities. This report summarizes the miscellaneous 'ad-hoc' work conducted during the later part of the year, such as support to the draft Programmatic Environmental Impact Statement (PEIS), and support to other program studies. Major programmatic contributions from the M-TSD team during the year included: (1) Completion of the IWMS in March 2008 as the

  17. GNEP Material Transportation, Storage and Disposal Analysis FY-08 Summary Report

    International Nuclear Information System (INIS)

    Halsey, W.

    2009-01-01

    This report provides a summary for FY-2008 of activities, analyses and products from the Material Transportation, Storage and Disposal (M-TSD) sub-task of Systems Analysis within the Advanced Fuel Cycle Research and Development area of the Global Nuclear Energy Partnership. The objective of this work is to evaluate near-term material management requirements for initial GNEP facilities and activities, long-term requirements for large-scale GNEP technology deployment, and alternatives and paths forward to meet these needs. For FY-08, the work expanded to include the Integrated Waste Management Strategy as well as integration with the newly formed Waste Forms Campaign. The M-TSD team was expanded with the addition of support from Savannah River National Lab (SRNL) to the existing team of Lawrence Livermore National Lab (LLNL), Argonne National Lab (ANL), Idaho National Lab (INL), Sandia National Lab (SNL) and University of Nevada - Reno (UN-R). During the first half of the year, analysis was focused on providing supporting technical analysis and documentation to support anticipated high-level decisions on program direction. A number of analyses were conducted and reports prepared as program deliverables. This work is briefly summarized in this report. Analyses provided informally to other program efforts are included in this report to provide documentation. This year-end summary was planned primarily as a compilation of activities following the anticipated programmatic decisions. These decisions were deferred beyond the end of the year, and funds were reallocated in a number of areas, thus reducing the M-TSD activities. This report summarizes the miscellaneous 'ad-hoc' work conducted during the later part of the year, such as support to the draft Programmatic Environmental Impact Statement (PEIS), and support to other program studies. Major programmatic contributions from the M-TSD team during the year included: (1) Completion of the IWMS in March 2008 as the baseline

  18. River Protection Project (RPP) Dangerous Waste Training Plan

    Energy Technology Data Exchange (ETDEWEB)

    POHTO, R.E.

    2000-03-09

    This supporting document contains the training plan for dangerous waste management at River Protection Project TSD Units. This document outlines the dangerous waste training program developed and implemented for all Treatment, Storage, and Disposal (TSD) Units operated by River Protection Project (RPP) in the Hanford 200 East, 200 West and 600 Areas and the <90 Day Accumulation Area at 209E. Operating TSD Units managed by RPP are: the Double-Shell Tank (DST) System, 204-AR Waste Unloading Facility, Grout, and the Single-Shell Tank (SST) System. The program is designed in compliance with the requirements of Washington Administrative Code (WAC) 173-303-330 and Title 40 Code of Federal Regulations (CFR) 265.16 for the development of a written dangerous waste training program and the Hanford Facility Permit. Training requirements were determined by an assessment of employee duties and responsibilities. The RPP training program is designed to prepare employees to operate and maintain the Tank Farms in a safe, effective, efficient, and environmentally sound manner. In addition to preparing employees to operate and maintain the Tank Farms under normal conditions, the training program ensures that employees are prepared to respond in a prompt and effective manner should abnormal or emergency conditions occur. Emergency response training is consistent with emergency responses outlined in the following Building Emergency Plans: HNF-IP-0263-TF and HNF-=IP-0263-209E.

  19. River Protection Project (RPP) Dangerous Waste Training Plan

    International Nuclear Information System (INIS)

    POHTO, R.E.

    2000-01-01

    This supporting document contains the training plan for dangerous waste management at River Protection Project TSD Units. This document outlines the dangerous waste training program developed and implemented for all Treatment, Storage, and Disposal (TSD) Units operated by River Protection Project (RPP) in the Hanford 200 East, 200 West and 600 Areas and the <90 Day Accumulation Area at 209E. Operating TSD Units managed by RPP are: the Double-Shell Tank (DST) System, 204-AR Waste Unloading Facility, Grout, and the Single-Shell Tank (SST) System. The program is designed in compliance with the requirements of Washington Administrative Code (WAC) 173-303-330 and Title 40 Code of Federal Regulations (CFR) 265.16 for the development of a written dangerous waste training program and the Hanford Facility Permit. Training requirements were determined by an assessment of employee duties and responsibilities. The RPP training program is designed to prepare employees to operate and maintain the Tank Farms in a safe, effective, efficient, and environmentally sound manner. In addition to preparing employees to operate and maintain the Tank Farms under normal conditions, the training program ensures that employees are prepared to respond in a prompt and effective manner should abnormal or emergency conditions occur. Emergency response training is consistent with emergency responses outlined in the following Building Emergency Plans: HNF-IP-0263-TF and HNF-=IP-0263-209E

  20. Technical support document for the surface disposal of sewage sludge. Final report

    International Nuclear Information System (INIS)

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed

  1. Technical support document for the surface disposal of sewage sludge. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed.

  2. Supporting Fernald Site Closure with Integrated Health and Safety Plans as Documented Safety Analyses

    International Nuclear Information System (INIS)

    Kohler, S.; Brown, T.; Fisk, P.; Krach, F.; Klein, B.

    2004-01-01

    At the Fernald Closure Project (FCP) near Cincinnati, Ohio, environmental restoration activities are supported by Documented Safety Analyses (DSAs) that combine the required project-specific Health and Safety Plans, Safety Basis Requirements (SBRs), and Process Requirements (PRs) into single Integrated Health and Safety Plans (I-HASPs). These integrated DSAs employ Integrated Safety Management methodology in support of simplified restoration and remediation activities that, so far, have resulted in the decontamination and demolition (D and D) of over 200 structures, including eight major nuclear production plants. There is one of twelve nuclear facilities still remaining (Silos containing uranium ore residues) with its own safety basis documentation. This paper presents the status of the FCP's safety basis documentation program, illustrating that all of the former nuclear facilities and activities have now replaced. Basis of Interim Operations (BIOs) with I-HASPs as their safety basis during the closure process

  3. New evidence: data documenting parental support for earlier sexuality education.

    Science.gov (United States)

    Barr, Elissa M; Moore, Michele J; Johnson, Tammie; Forrest, Jamie; Jordan, Melissa

    2014-01-01

    Numerous studies document support for sexuality education to be taught in high school, and often, in middle school. However, little research has been conducted addressing support for sexuality education in elementary schools. As part of the state Behavioral Risk Factor Surveillance System (BRFSS) Survey administration, the Florida Department of Health conducted the Florida Child Health Survey (FCHS) by calling back parents who had children in their home and who agreed to participate (N = 1715). Most parents supported the following sexuality education topics being taught specifically in elementary school: communication skills (89%), human anatomy/reproductive information (65%), abstinence (61%), human immunodeficiency virus (HIV)/sexually transmitted infections (STIs) (53%), and gender/sexual orientation issues (52%). Support was even greater in middle school (62-91%) and high school (72-91%) for these topics and for birth control and condom education. Most parents supported comprehensive sexuality education (40.4%), followed by abstinence-plus (36.4%) and abstinence-only (23.2%). Chi-square results showed significant differences in the type of sexuality education supported by almost all parent demographic variables analyzed including sex, race, marital status, and education. Results add substantial support for age-appropriate school-based sexuality education starting at the elementary school level, the new National Sexuality Education Standards, and funding to support evidence-based abstinence-plus or comprehensive sexuality education. © 2013, American School Health Association.

  4. 31 CFR 256.12 - What supporting documentation must agencies submit to FMS when requesting a payment from the...

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What supporting documentation must... BILLS Requesting Payments § 256.12 What supporting documentation must agencies submit to FMS when... guardian. Agencies must list the appropriate controlling state law citation on the payment request forms...

  5. Hanford facility dangerous waste Part A, Form 3, and Part B permit application documentation for the Central Waste Complex (WA7890008967) (TSD: TS-2-4)

    International Nuclear Information System (INIS)

    Saueressig, D.G.

    1998-01-01

    The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating, treatment, storage, and/or disposal units, such as the Central Waste Complex (this document, DOE/RL-91-17). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the U.S. Environmental Protection Agency (40 Code of Federal Regulations 270), with additional information needed by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the Central Waste Complex permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents section. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Wherever appropriate, the Central Waste Complex permit application documentation makes cross-reference to the General Information Portion, rather than duplicating text. Information provided in this Central Waste Complex permit application documentation is current as of May 1998

  6. Listed waste history at Hanford facility TSD units

    International Nuclear Information System (INIS)

    Miskho, A.G.

    1996-01-01

    This document was prepared to close out an occurrence report that Westinghouse Hanford Company issued on December 29, 1994. Occurrence Report RL-WHC-GENERAL-1994-0020 was issued because knowledge became available that could have impacted start up of a Hanford Site facility. The knowledge pertained to how certain wastes on the Hanford Site were treated, stored, or disposed of. This document consolidates the research performed by Westinghouse Hanford Company regarding listed waste management at onsite laboratories that transfer waste to the Double-Shell Tank System. Liquid and solid (non-liquid) dangerous wastes and mixed wastes at the Hanford Site are generated from various Site operations. These wastes may be sampled and characterized at onsite laboratories to meet waste management requirements. In some cases, the wastes that are generated in the field or in the laboratory from the analysis of samples require further management on the Hanford Site and are aggregated together in centralized tank storage facilities. The process knowledge presented herein documents the basis for designation and management of 242-A Evaporator Process Condensate, a waste stream derived from the treatment of the centralized tank storage facility waste (the Double-Shell Tank System). This document will not be updated as clean up of the Hanford Site progresses

  7. Supporting document for the historical tank content estimate for AN-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W., Fluor Daniel Hanford

    1997-03-06

    This Supporting Document provides historical in-depth characterization information on AN-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  8. Supporting document for the historical tank content estimate for AY-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C H; Stroup, J L; Funk, J. W.

    1997-03-12

    This Supporting Document provides historical in-depth characterization information on AY-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  9. Supporting document for the historical tank content estimate for AW-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H., Stroup, J.L.; Funk, J.W., Fluor Daniel Hanford

    1997-03-06

    This Supporting Document provides historical in-depth characterization information on AW-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  10. Supporting document for the historical tank content estimate for AP-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W., Fluor Daniel Hanford

    1997-03-06

    This Supporting Document provides historical in-depth characterization information on AP-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  11. Supporting document for the historical tank content estimate for AP-tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W.

    1997-01-01

    This Supporting Document provides historical in-depth characterization information on AP-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas

  12. Supporting document for the historical tank content estimate for AW-tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W.

    1997-01-01

    This Supporting Document provides historical in-depth characterization information on AW-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas

  13. Tank waste remediation system dangerous waste training plan

    International Nuclear Information System (INIS)

    POHTO, R.E.

    1999-01-01

    This document outlines the dangerous waste training program developed and implemented for all Treatment, Storage, and Disposal (TSD) Units operated by Lockheed Martin Hanford Corporation (LMHC) Tank Waste Remediation System (TWRS) in the Hanford 200 East, 200 West and 600 Areas and the <90 Day Accumulation Area at 209E. Operating TSD Units operated by TWRS are: the Double-Shell Tank (DST) System (including 204-AR Waste Transfer Building), the 600 Area Purgewater Storage and the Effluent Treatment Facility. TSD Units undergoing closure are: the Single-Shell Tank (SST) System, 207-A South Retention Basin, and the 216-B-63 Trench

  14. 200-BP-11 operable unit and 216-B-3 main pond work/closure plan, Hanford Site, Richland, Washington. Volume 1: Field investigation and sampling strategy

    International Nuclear Information System (INIS)

    1994-09-01

    This document coordinates a Resource Conservation and Recovery Act (RCRA) past-practice work plan for the 200-BP-11 Operable Unit and a RCRA closure/postclosure plan for the 216-B-3 Main Pond and 216-B-3-3 Ditch [treatment, storage, and/or disposal (TSD) unit]. Both RCRA TSD and past-practice waste management units are contained within the 200-BP-11 Operable Unit. The 200-BP-11 Operable Unit is a source operable unit located on the east side of the B Plant Source Aggregate Area in the 200 East Area of the Hanford Site. The operable unit lies just east of the 200 East Area perimeter fence and encompass approximately 476 hectares (1,175 acres). Source operable units include waste management units that are potential sources of radioactive and/or hazardous substance contamination. Source waste management units are categorized in the Hanford Federal Facility Agreement and Consent Order as either RCRA TSD, RCRA past-practice, or Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) past-practice. As listed below and in the Tri-Party Agreement, the 200-BP-11 Operable Unit contains five RCRA past-practice and five RCRA TSD waste management units. Additionally, for RCRA TSD permitting purposes, the RCRA TSD waste management units are subdivided into two RCRA TSD units

  15. Supporting document for the historical tank content estimate for BY-Tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.

    1996-06-28

    This Supporting Document provides historical in-depth characterization information on BY-Tank Farm, such as historical waste transfer and level data, tank physical information,temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the northeast quadrant of the Hanford 200 East Area.

  16. Supporting document for the historical tank content estimate for BY-Tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Newell, R.L.; Funk, J.W.

    1996-01-01

    This Supporting Document provides historical in-depth characterization information on BY-Tank Farm, such as historical waste transfer and level data, tank physical information,temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the northeast quadrant of the Hanford 200 East Area

  17. Supporting document for the historical tank content estimate for BX-tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.

    1996-01-01

    This Supporting Document provides historical in-depth characterization information on BX-Tank Farm, such as historical waste transfer and level data, tank physical information,temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the northeast quadrant of the Hanford 200 East Area

  18. Supporting document for the historical tank content estimate for A-Tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Newell, R.L.; Funk, J.W.

    1996-01-01

    This Supporting Document provides historical in-depth characterization information on A-Tank Farm, such as historical waste transfer and level data, tank physical information,temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the northeast quadrant of the Hanford 200 East Area

  19. Technical support document for land application of sewage sludge. Volume 1. Final report

    International Nuclear Information System (INIS)

    Jones, A.; Beyer, L.; Rookwood, M.; Pacenka, J.; Bergin, J.

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the land application of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in land applied sewage sludge. The management practices associated with land application are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through land application are discussed

  20. The Hanford Site Environmental Restoration Program 1993 fiscal year work plan

    International Nuclear Information System (INIS)

    1992-09-01

    Site Management System (SMS) guidance requires a Fiscal Year Work Plan (FYWP) be prepared for the Environmental Restoration (ER) Mission Area and all related programs. This document describes the overall ER Mission Area and provides FYWP appendixes for each of the five program areas: Remedial Action (RA); Decontamination and Decommissioning (D ampersand D); Project Management and Support (PM ampersand S); Surveillance and Maintenance (S ampersand M); and Treatment, Storage, and/or Disposal (TSD)

  1. WIPP documentation plan

    International Nuclear Information System (INIS)

    Plung, D.L.; Montgomery, T.T.; Glasstetter, S.R.

    1986-01-01

    In support of the programs at the Waste Isolation Pilot Plant (WIPP), the Publications and Procedures Section developed a documentation plan that provides an integrated document hierarchy; further, this plan affords several unique features: 1) the format for procedures minimizes the writing responsibilities of the technical staff and maximizes use of the writing and editing staff; 2) review cycles have been structured to expedite the processing of documents; and 3) the numbers of documents needed to support the program have been appreciably reduced

  2. [Document management systems to support quality management systems at university hospitals - an interview-based study].

    Science.gov (United States)

    Holderried, Martin; Bökel, Ann-Catrin; Ochsmann, Elke

    2018-05-01

    In order to save and control the processes and quality of medical services, a suitable steering system of all relevant documents is essential from the point of view of clinical quality management. Systems supporting an automated steering system of documents are called document management systems (DMS), and they also enter the healthcare sector. The use of DMS in the German healthcare sector has hardly been investigated so far. To close this knowledge gap, interviews were carried out with German university hospitals over a six-month period and subjected to a qualitative content analysis according to Mayring. In total, 25 university hospitals agreed to participate in this study, 19 of which have been working with a digital DMS for about six years on average. There was a great variety among the IT systems used. Document management and usability of the DMS as well as its integration into existing IT structures were key decision-making criteria for the selection of a digital DMS. In general, the long-term usability of the DMS is supported by regular evaluation of one's own requirements for the system, administration and training programs. In addition, DMS have a positive effect on patient safety and the quality of medical care. Copyright © 2018. Published by Elsevier GmbH.

  3. Effects of TEL Confusers on Operator Target Acquisition Performance with SAR Imagery

    Science.gov (United States)

    1998-12-01

    efforts of everyone involved in the project; and Dr. Nick Patton, for providing assistance with several of the mathematical procedures in the document...processing known as the theory of signal detection (TSD) (Gescheider, 1985; Green & Swets, 1966; Macmillan & Creelman , 1991; Wilson, 1992). A TSD...localizations (Hacker & Ratcliff, 1979; Macmillan & Creelman , 1991). The index of bias in a target localization task provides a measure of the operator’s

  4. [Support of the nursing process through electronic nursing documentation systems (UEPD) – Initial validation of an instrument].

    Science.gov (United States)

    Hediger, Hannele; Müller-Staub, Maria; Petry, Heidi

    2016-01-01

    Electronic nursing documentation systems, with standardized nursing terminology, are IT-based systems for recording the nursing processes. These systems have the potential to improve the documentation of the nursing process and to support nurses in care delivery. This article describes the development and initial validation of an instrument (known by its German acronym UEPD) to measure the subjectively-perceived benefits of an electronic nursing documentation system in care delivery. The validity of the UEPD was examined by means of an evaluation study carried out in an acute care hospital (n = 94 nurses) in German-speaking Switzerland. Construct validity was analyzed by principal components analysis. Initial references of validity of the UEPD could be verified. The analysis showed a stable four factor model (FS = 0.89) scoring in 25 items. All factors loaded ≥ 0.50 and the scales demonstrated high internal consistency (Cronbach's α = 0.73 – 0.90). Principal component analysis revealed four dimensions of support: establishing nursing diagnosis and goals; recording a case history/an assessment and documenting the nursing process; implementation and evaluation as well as information exchange. Further testing with larger control samples and with different electronic documentation systems are needed. Another potential direction would be to employ the UEPD in a comparison of various electronic documentation systems.

  5. Supporting document for the historical tank content estimate for the S-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H., Fluor Daniel Hanford

    1997-02-25

    This Supporting Document provides historical in-depth characterization information on S-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southwest Quadrant of the Hanford 200 West Area.

  6. Supporting document for the historical tank content estimate for the SX-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H., Fluor Daniel Hanford

    1997-02-25

    This Supporting Document provides historical in-depth characterization information on SX-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southwest Quadrant of the Hanford 200 West Area.

  7. BASINs 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual (Final Report)

    Science.gov (United States)

    EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of R...

  8. Results of site validation experiments. Volume II. Supporting documents 5 through 14

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains the following supporting documents: Summary of Geologic Mapping of Underground Investigations; Logging of Vertical Coreholes - ''Double Box'' Area and Exploratory Drift; WIPP High Precision Gravity Survey; Basic Data Reports for Drillholes, Brine Content of Facility Internal Strata; Mineralogical Content of Facility Interval Strata; Location and Characterization of Interbedded Materials; Characterization of Aquifers at Shaft Locations; and Permeability of Facility Interval Strate.

  9. A Study in Difference: Structures and Cultures in Registered Training Organisations. Support Document 3

    Science.gov (United States)

    Clayton, Berwyn; Fisher, Thea; Harris, Roger; Bateman, Andrea; Brown, Mike

    2008-01-01

    This document supports the report "A Study in Difference: Structures and Cultures in Registered Training Organisations." The first section outlines the methodology used to undertake the research and covers the design of the research, sample details, the data collection process and the strategy for data analysis and reporting. The…

  10. Supporting document for the SW Quadrant Historical Tank Content Estimate for U-Tank Farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Johnson, E.D.

    1994-06-01

    This Supporting Document provides historical characterization information gathered on U-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature data, sampling data, and drywell and liquid observation well data for Historical Tank Content Estimate of the SW Quadrant at the Hanford 200 West Area

  11. Supporting Document for the SW Quadrant Historical Tank Content Estimate for SX-Tank Farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Johnson, E.D.

    1994-06-01

    This Supporting Document provides historical characterization information gathered on SX-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature data, sampling data, and drywell and liquid observation well data for Historical Tank Content Estimate of the SW Quadrant at the Hanford 200 West Area

  12. Builders Challenge Quality Criteria Support Document

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-06-01

    This document provides guidance to U.S. home builders participating in Builders Challenge. To qualify for the Builders Challenge, a home must score 70 or less on the EnergySmart Home Scale (E-Scale). Homes also must meet the Builders Challenge Quality Cri

  13. Changing School Culture: Using Documentation to Support Collaborative Inquiry

    Science.gov (United States)

    Given, Heidi; Kuh, Lisa; LeeKeenan, Debbie; Mardell, Ben; Redditt, Susan; Twombly, Susan

    2010-01-01

    This article considers how documentation as a professional development tool acts as a change agent for teachers and how collective engagement in the documentation process mediates the inherent tensions of working and learning in a group. Three groups of educators, at three distinct schools, used Reggio Emilia-inspired documentation as the…

  14. Hybrid robust deep and shallow semantic processing for creativity support in document production

    OpenAIRE

    Uszkoreit, Hans; Callmeier, Ulrich; Eisele, Andreas; Schäfer, Ulrich; Siegel, Melanie

    2004-01-01

    The research performed in the DeepThought project (http://www.project-deepthought.net) aims at demonstrating the potential of deep linguistic processing if added to existing shallow methods that ensure robustness. Classical information retrieval is extended by high precision concept indexing and relation detection. We use this approach to demonstrate the feasibility of three ambitious applications, one of which is a tool for creativity support in document production and collective brainstormi...

  15. Enterprise Document Management

    Data.gov (United States)

    US Agency for International Development — The function of the operation is to provide e-Signature and document management support for Acquisition and Assisitance (A&A) documents including vouchers in...

  16. Concern about Lost Talent: Support Document

    Science.gov (United States)

    Sikora, Joanna; Saha, Lawrence J.

    2011-01-01

    This document was produced by the authors based on their research for the report "Lost talent? The occupational ambitions and attainments of young Australians", and is an added resource for further information. The purpose of this supplement is to provide greater detail about the background of research into the topic of human talent in…

  17. Piles, tabs and overlaps in navigation among documents

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Rønne; Hornbæk, Kasper

    2010-01-01

    Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles. In an experim......Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles....... In an experiment we compared 11 participants’ navigation with these variations and found strong task effects. Overall, overlapping windows were preferred and their structured layout worked well with some tasks. Surprisingly, tabbed documents were efficient in tasks requiring simply finding a document. Piled...... on document navigation and its support by piling....

  18. Formalization of Technological Knowledge in the Field of Metallurgy using Document Classification Tools Supported with Semantic Techniques

    Directory of Open Access Journals (Sweden)

    Regulski K.

    2017-06-01

    Full Text Available The process of knowledge formalization is an essential part of decision support systems development. Creating a technological knowledge base in the field of metallurgy encountered problems in acquisition and codifying reusable computer artifacts based on text documents. The aim of the work was to adapt the algorithms for classification of documents and to develop a method of semantic integration of a created repository. Author used artificial intelligence tools: latent semantic indexing, rough sets, association rules learning and ontologies as a tool for integration. The developed methodology allowed for the creation of semantic knowledge base on the basis of documents in natural language in the field of metallurgy.

  19. Final Draft Programme Support Document

    DEFF Research Database (Denmark)

    Enemark, Ulrika; Schleimann, Finn; Vagnby, Bo Hellisen

    The HSPS III is the third phase of Danish support to the Ghanaian Health Sector. The support is in line with the Ministy of Health's Medium Term Strategy and the Second Five-Year Programme of Work; the latter also bring in line with the Ghana Poverty Reduction Strategy. The majority of funds (340...

  20. Comparison of Vehicle Efficiency Technology Attributes and Synergy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    Duleep, G. [ICF Incorporated, LLC., Fairfax, VA (United States)

    2011-02-01

    Analyzing the future fuel economy of light-duty vehicles (LDVs) requires detailed knowledge of the vehicle technologies available to improve LDV fuel economy. The National Highway Transportation Safety Administration (NHTSA) has been relying on technology data from a 2001 National Academy of Sciences (NAS) study (NAS 2001) on corporate average fuel economy (CAFE) standards, but the technology parameters were updated in the new proposed rulemaking (EPA and NHTSA 2009) to set CAFE and greenhouse gas standards for the 2011 to 2016 period. The update is based largely on an Environmental Protection Agency (EPA) analysis of technology attributes augmented by NHTSA data and contractor staff assessments. These technology cost and performance data were documented in the Draft Joint Technical Support Document (TSD) issued by EPA and NHTSA in September 2009 (EPA/NHTSA 2009). For these tasks, the Energy and Environmental Analysis (EEA) division of ICF International (ICF) examined each technology and technology package in the Draft TSD and assessed their costs and performance potential based on U.S. Department of Energy (DOE) program assessments. ICF also assessed the technologies, other relevant attributes based on data from actual production vehicles, and recently published technical articles in engineering journals. ICF examined technology synergy issues through an ICF in-house model that uses a discrete parameter approach.

  1. Comparison of Vehicle Efficiency Technology Attributes and Synergy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    Duleep, G.

    2011-02-01

    Analyzing the future fuel economy of light-duty vehicles (LDVs) requires detailed knowledge of the vehicle technologies available to improve LDV fuel economy. The National Highway Transportation Safety Administration (NHTSA) has been relying on technology data from a 2001 National Academy of Sciences (NAS) study (NAS 2001) on corporate average fuel economy (CAFE) standards, but the technology parameters were updated in the new proposed rulemaking (EPA and NHTSA 2009) to set CAFE and greenhouse gas standards for the 2011 to 2016 period. The update is based largely on an Environmental Protection Agency (EPA) analysis of technology attributes augmented by NHTSA data and contractor staff assessments. These technology cost and performance data were documented in the Draft Joint Technical Support Document (TSD) issued by EPA and NHTSA in September 2009 (EPA/NHTSA 2009). For these tasks, the Energy and Environmental Analysis (EEA) division of ICF International (ICF) examined each technology and technology package in the Draft TSD and assessed their costs and performance potential based on U.S. Department of Energy (DOE) program assessments. ICF also assessed the technologies? other relevant attributes based on data from actual production vehicles and from recently published technical articles in engineering journals. ICF examined technology synergy issues through an ICF in-house model that uses a discrete parameter approach.

  2. Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

    Science.gov (United States)

    Brenton, James; Roberts, Barry C.

    2017-01-01

    The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

  3. FROM DOCUMENTATION IMAGES TO RESTAURATION SUPPORT TOOLS: A PATH FOLLOWING THE NEPTUNE FOUNTAIN IN BOLOGNA DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    F. I. Apollonio

    2017-05-01

    Full Text Available The sixteenth-century Fountain of Neptune is one of Bologna’s most renowned landmarks. During the recent restoration activities of the monumental sculpture group, consisting in precious marbles and highly refined bronzes with water jets, a photographic campaign has been carried out exclusively for documentation purposes of the current state of preservation of the complex. Nevertheless, the highquality imagery was used for a different use, namely to create a 3D digital model accurate in shape and color by means of automated photogrammetric techniques and a robust customized pipeline. This 3D model was used as basic tool to support many and different activities of the restoration site. The paper describes the 3D model construction technique used and the most important applications in which it was used as support tool for restoration: (i reliable documentation of the actual state; (ii surface cleaning analysis; (iii new water system and jets; (iv new lighting design simulation; (v support for preliminary analysis and projectual studies related to hardly accessible areas; (vi structural analysis; (vii base for filling gaps or missing elements through 3D printing; (viii high-quality visualization and rendering and (ix support for data modelling and semantic-based diagrams.

  4. 9 CFR 392.4 - Supporting documentation.

    Science.gov (United States)

    2010-01-01

    ...) industry data, and (6) scientific textbooks. (c) If an original research report is used to support a... reviewed scientific or technical journal. (d) If quantitative data are used to support a petition, the... to use in support of a petition include, but are not limited to: (1) professional journal articles...

  5. A prototype of a documentation system that supports the development and maintenance of product configuration systems

    DEFF Research Database (Denmark)

    Haug, Anders; Degn, Anders; Poulsen, Bjarne

    2007-01-01

    , such as shorter lead times, reductions of resources needed and fewer errors. A procedure for the development and maintenance of PCSs, which has been applied in configuration projects for more than ten years, includes three main modelling techniques to support the development and maintenance of PCSs. Unfortunately...... system that supports the development and maintenance of PCSs. This article describes how some of this research has been converted into a prototype of a documentation system and what has been learned from the evaluation of the prototype...

  6. Supporting document for the north east quadrant historical tank content estimate report for AX-tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This Supporting Document provides historical in-depth characterization information gathered in AX-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature data, sampling data, and drywell and liquid observation well data for Historical Tank Content Estimate Report of the NE Quadrant and the Hanford 200 East Areas

  7. Supporting document for the north east quadrant historical tank content estimate report for C-Tank Farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This Supporting Document provides historical in-depth characterization information gathered on C-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature data, sampling data, and drywell and liquid observation well data for Historical Tank Content Estimate Report of the NE Quadrant and the Hanford 200 East Areas

  8. Enhancement of solubility and oral bioavailability of manidipine by formation of ternary solid dispersion with d-α-tocopherol polyethylene glycol 1000 succinate and copovidone.

    Science.gov (United States)

    Chamsai, Benchawan; Limmatvapirat, Sontaya; Sungthongjeen, Srisagul; Sriamornsak, Pornsak

    2017-12-01

    Low bioavailability of oral manidipine (MDP) is due to its low water solubility. The objective of this study was to increase the solubility and bioavailability of MDP by fabricating ternary solid dispersion (tSD) with d-α-tocopherol polyethyleneglycol-1000-succinate and copovidone. In this study, solid ternary phase diagram was applied in order to check the homogeneity of tSD prepared by melting and solidifying with dry ice. The physicochemical properties of different formulations were determined by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR) and hot stage microscopy. Their solubility, dissolution, stability and bioavailability were also investigated. The results demonstrated that tSD obtained from ternary phase diagram divided into homogeneous and non-homogeneous regions. In the homogenous region, the transparent characteristics of tSD was observed and considered as a glass solution, which have a higher MDP solubility than that in non-homogenous region. The hot stage microscopy, DSC and PXRD confirmed that solid dispersion was formed in which MDP was molecularly dispersed in the carriers, especially in the homogenous region of phase diagram. FTIR analysis demonstrated strong hydrogen bonding between amine groups of MDP and carbonyl groups of copovidone, which supported a higher solubility and dissolution of tSD. The pharmacokinetic study in Wistar rats showed that the tSD had the greatest effect on oral bioavailability. Immediate hypotensive effect of tSD was also observed in vivo. The improvement of stability, dissolution and oral bioavailability of MDP could be achieved by using tSD technique.

  9. 78 FR 10181 - Documents To Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2013-02-13

    .... regional document type definition, version 3.1), and ``Comprehensive Table of Contents Headings and... characterization of promotional marketing and advertising material, and facilitate automated processing of...

  10. Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Pless, S.; Torcellini, P.; Long, N.

    2007-09-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

  11. Toward Documentation of Program Evolution

    DEFF Research Database (Denmark)

    Vestdam, Thomas; Nørmark, Kurt

    2005-01-01

    The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

  12. Technical Support Document: The Development of the Advanced Energy Design Guide for Small Retail Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bing; Jarnagin, Ronald E.; Winiarski, David W.; Jiang, Wei; McBride, Merle F.; Crall, C.

    2006-09-30

    The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the ?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.

  13. Maury Documentation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Supporting documentation for the Maury Collection of marine observations. Includes explanations from Maury himself, as well as guides and descriptions by the U.S....

  14. General Merchandise 50% Energy Savings Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  15. (Review Draft) Radiation Site Cleanup Regulations: Technical Support Document For The Development Of Radionuclide Cleanup Levels For Soil

    Science.gov (United States)

    This document describes parts of the technical analysis being undertaken in support of standards that ensure certain sites are cleaned up to a level that is protective of human health and the environment before they are released for public use.

  16. Supporting the Co-operative Organisation of Rational Energy Use (SCORE). Romania Country Document

    International Nuclear Information System (INIS)

    2000-10-01

    Energy efficiency improvements in the various end-use sectors constitute a very substantial saving potential, which presently is insufficiently addressed in Central and Eastern Europe. For that reason the SCORE concept has been initiated. SCORE stands for 'Supporting the Cooperative Organisation of Rational Energy Use'. SCORE is a Netherlands society to society programme, aiming at assisting the social transformation in the Central and Eastern European countries through projects and actions aiming at improvements in environmental protection and energy end-use sectors. SCORE is managed by the Netherlands Agency for Energy and the Environment (Novem) in partnership with local agencies in Central and Eastern Europe. The SCORE Country Document is based on: Survey on the existing policies and measures for energy efficiency, identified barriers, and the priorities for energy efficiency improvement in the country. The survey was carried out among some of the most important actors in this area by interviews, supported by filling in a questionnaire in a common format. Review of the existing strategic and regulatory documents and policy papers, different information sources like studies, reports, Internet sites. In chapter 2 the qualitative and quantitative situation in the field of energy supply and consumption is presented. In chapter 3 several topics will be addressed to provide insight into the national energy efficiency and climate change policy, a review, of the actors, with their tasks and responsibilities, the domestic programmes and initiatives as well as the foreign assistance programmes and initiatives. Chapter 4 includes the bottlenecks and problems identified to improve the energy efficiency situation in Romania. In chapter 5 some remarks are made on the criteria for SCORE projects

  17. 77 FR 46763 - Documents to Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2012-08-06

    ... document type definition (DTD), version 3.0) and ``Comprehensive Table of Contents Headings and Hierarchy... promotional marketing and advertising material, and to facilitate automated processing of submissions. In... backbone files specification. ``Comprehensive Table of Contents Headings and Hierarchy, version 2.0...

  18. Changing Landscapes in Documentation Efforts: Civil Society Documentation of Serious Human Rights Violations

    Directory of Open Access Journals (Sweden)

    Brianne McGonigle Leyh

    2017-04-01

    Full Text Available Wittingly or unwittingly, civil society actors have long been faced with the task of documenting serious human rights violations. Thirty years ago, such efforts were largely organised by grassroots movements, often with little support or funding from international actors. Sharing information and best practices was difficult. Today that situation has significantly changed. The purpose of this article is to explore the changing landscape of civil society documentation of serious human rights violations, and what that means for standardising and professionalising documentation efforts. Using the recent Hisséne Habré case as an example, this article begins by looking at how civil society documentation can successfully influence an accountability process. Next, the article touches upon barriers that continue to impede greater documentation efforts. The article examines the changing landscape of documentation, focusing on technological changes and the rise of citizen journalism and unofficial investigations, using Syria as an example, as well as on the increasing support for documentation efforts both in Syria and worldwide. The changing landscape has resulted in the proliferation of international documentation initiatives aimed at providing local civil society actors guidelines and practical assistance on how to recognise, collect, manage, store and use information about serious human rights violations, as well as on how to minimise the risks associated with the documentation of human rights violations. The recent initiatives undertaken by international civil society, including those by the Public International Law & Policy Group, play an important role in helping to standardise and professionalise documentation work and promote the foundational principles of documentation, namely the ‘do no harm’ principle, and the principles of informed consent and confidentiality. Recognising the drawback that greater professionalisation may bring, it

  19. RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

    Science.gov (United States)

    The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

  20. Field Investigation Plan for 1301-N and 1325-N Facilities Sampling to Support Remedial Design

    International Nuclear Information System (INIS)

    Weiss, S. G.

    1998-01-01

    This field investigation plan (FIP) provides for the sampling and analysis activities supporting the remedial design planning for the planned removal action for the 1301-N and 1325-N Liquid Waste Disposal Facilities (LWDFs), which are treatment, storage,and disposal (TSD) units (cribs/trenches). The planned removal action involves excavation, transportation, and disposal of contaminated material at the Environmental Restoration Disposal Facility (ERDF).An engineering study (BHI 1997) was performed to develop and evaluate various options that are predominantly influenced by the volume of high- and low-activity contaminated soil requiring removal. The study recommended that additional sampling be performed to supplement historical data for use in the remedial design

  1. A systematic approach for future solid waste cleanup activities at the Hanford Site

    International Nuclear Information System (INIS)

    Dirks, L.L.; Konynenbelt, H.S.; Hladek, K.L.

    1995-02-01

    This paper describes the systematic approach to the treatment, storage, and disposal system (TSD) planning and management that has been developed and implemented by Hanford's Solid Waste Program. The systematic approach includes: collecting the forecast and waste inventory data; defining Hanford's TSD system; studying and refining the TSD system by using analysis tools; and documenting analysis results. The customers responsible for planning, funding, and managing future solid waste activities have driven the evolution of the solid waste system. Currently, all treatment facilities are several years from operating. As these facilities become closer to reality, more detailed systems analysis and modeling will be necessary to successfully remediate solid waste at the Site. The tools will continue to be developed in detail to address the complexities of the system as they become better defined. The tools will help determine which facility lay-outs are most optimal, will help determine what types of equipment should be used to optimize the transport of materials to and from each TSD facility, and will be used for performing life-cycle analysis. It is envisioned that in addition to developing the tools to be adapted to the more specific facility design issues, this approach will also be used as an example for other waste installations across the DOE complex

  2. Literacy, Numeracy and Alternative Dispute Resolution: Support Document

    Science.gov (United States)

    Cumming, J. Joy; Wilson, Janice M.

    2005-01-01

    This document was produced by the authors based on their research for the report "Literacy, Numeracy and Alternative Dispute Resolution," and is an added resource for further information. It contains the appendices: (1) Published statistics on mediation/alternative dispute resolution in Australian courts and tribunals over the period…

  3. 1995 Baseline solid waste management system description

    International Nuclear Information System (INIS)

    Anderson, G.S.; Konynenbelt, H.S.

    1995-09-01

    This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

  4. Cross-Cultural Training and Workplace Performance. Support Document

    Science.gov (United States)

    Bean, Robert

    2008-01-01

    This document was produced by the author(s) based on their research for the report "Cross- Cultural Training and Workplace Performance" (ED503402). It contains the following materials related to the report: (1) Primary approach letters; (2) Tests for statistical significance; (3) Survey of current cross-cultural training practice; (4)…

  5. Document Management and Exchange System – Supporting Education Process

    Directory of Open Access Journals (Sweden)

    Emil Egredzija

    2010-03-01

    Full Text Available Development and implementation of new technologies are very important in education. One of the most challenging tasks in the education process is to build efficient and cost-friendly system for content management and exchange. The system has to be reliable, easy manageable and open. Centralized storage, secured access, and ubiquitous client technologies have emerged as best-practice solutions in engineering that kind of services. Users can easily publish or exchange documents and not need to worry about their distribution, storage or technical skills required for efficient document management. The system that will be presented is built on open source technologies and is deployable on all today's popular web software platforms. The web server, the programming language and operating system that are used to build and deploy such a system are all non-proprietary and completely open because our mission was to build system that can be easily extended and not limited by its corporate license. The system uses security mechanisms such as user group access policy, operating system level security (file system and secured data storage in database. Because of the growing need for document management in education process we believe that this project will find its place in practice.

  6. Document control system as an integral part of RA documentation database application

    International Nuclear Information System (INIS)

    Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

    2005-01-01

    The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

  7. Document Classification in Support of Automated Metadata Extraction Form Heterogeneous Collections

    Science.gov (United States)

    Flynn, Paul K.

    2014-01-01

    A number of federal agencies, universities, laboratories, and companies are placing their documents online and making them searchable via metadata fields such as author, title, and publishing organization. To enable this, every document in the collection must be catalogued using the metadata fields. Though time consuming, the task of identifying…

  8. Technical basis document for external events

    International Nuclear Information System (INIS)

    OBERG, B.D.

    2003-01-01

    This document supports the Tank Farms Documented Safety Analysis and presents the technical basis for the FR-equencies of externally initiated accidents. The consequences of externally initiated events are discussed in other documents that correspond to the accident that was caused by the external event. The external events include aircraft crash, vehicle accident, range fire, and rail accident

  9. Replacement Saltwell Pumping System Document Bibliography

    International Nuclear Information System (INIS)

    BELLOMY, J.R.

    2000-01-01

    This document bibliography is prepared to identify engineering documentation developed during the design of the Replacement Saltwell Pumping System. The bibliography includes all engineering supporting documents and correspondence prepared prior to the deployment of the system in the field. All documents referenced are available electronically through the Records Management Information System (RMIS). Major components of the Replacement Saltwell Pumping System include the Sundyne Canned Motor Pump, the Water Filter Skid, the Injection Water Skid and the Backflow Preventer Assembly. Drawing H-14-104498 provides an index of drawings (fabrication details, PandIDs, etc.) prepared to support development of the Replacement Saltwell Pumping System. Specific information pertaining to new equipment can be found in Certified Vendor Information (CVI) File 50124. This CVI file has been established specifically for new equipment associated with the Replacement Saltwell Pumping System

  10. Improving collaborative documentation in CMS

    International Nuclear Information System (INIS)

    Lassila-Perini, Kati; Salmi, Leena

    2010-01-01

    Complete and up-to-date documentation is essential for efficient data analysis in a large and complex collaboration like CMS. Good documentation reduces the time spent in problem solving for users and software developers. The scientists in our research environment do not necessarily have the interests or skills of professional technical writers. This results in inconsistencies in the documentation. To improve the quality, we have started a multidisciplinary project involving CMS user support and expertise in technical communication from the University of Turku, Finland. In this paper, we present possible approaches to study the usability of the documentation, for instance, usability tests conducted recently for the CMS software and computing user documentation.

  11. Renewable electricity generation: supporting documentation for the Renewables Advisory Board submission to the 2006 UK energy review

    International Nuclear Information System (INIS)

    2006-01-01

    The Renewables Advisory Board (RAB) is an independent, non-departmental public body, sponsored by the DTI, which brings together representatives of the renewable sector and the unions. Electricity generation from renewable energy sources offers a range of advantages to the UK electricity-generating sector. This document, prepared as supporting documentation for the RAB submission to the 2006 Energy Review, examines the role of renewable energy in improving security of supply, lowering financial risk for energy portfolios, and reducing electricity cost volatility and fuel costs for the UK. Key topics addressed in this report include: resource security; security of supply; price security; and operational security. Also covered are variability patterns, financial costs and benefits of renewable generation. Maintaining the option and flexibility of future renewables development has a real option value, with overseas evidence showing that this can be significant

  12. Visible-light photoactivity of plasmonic silver supported on mesoporous TiO2 nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: Limitation of Ag-Ti interaction

    International Nuclear Information System (INIS)

    Jaafar, N.F.; Jalil, A.A.; Triwahyono, S.

    2017-01-01

    Highlights: • Ag 0 loaded on MTN was prepared by a direct in-situ electrochemical method. • The introduction of Ag 0 lowers the band gap and increases the number of OV and TSD. • Ag 0 acted as an electrons trapper and also a plasmonic sensitizer. • The formation of Ti-O-Ag in 10 wt% Ag-MTN decreased the amount of Ag 0 , TSD and OV. • 5 wt% Ag-MTN gave the highest percentage of photodegradation of 2-CP. - Abstract: Various weight loadings of Ag (1–10 wt.%) were introduced to mesoporous titania nanoparticles (MTN) via a direct in-situ electrochemical method. The catalysts were characterized by XRD, surface area analysis, FTIR, ESR, FESEM-EDX and TEM. Characterization results indicated that the introduction of Ag onto MTN decreased the particles size and band gap of the MTN while increasing the number of oxygen vacancies (OV) and Ti 3+ site defects (TSD). The activity performance of Ag-MTN on photodegradation of 2-chlorophenol (2-CP) under visible light irradiation was in the following order: 5 wt% Ag-MTN> 1 wt% Ag-MTN > MTN > 10 wt% Ag-MTN, with degradation percentages of 97, 88, 80 and 63%, respectively. The synergistic effect between Ag 0 and MTN seemed to play an important role in the system. The Ag0 acted as both an electron trap and a plasmonic sensitizer which suppressed the electron-hole recombination, while OV and TSD in the MTN accelerated the production of hydroxyl radicals for enhanced degradation of 2-CP. However, the formation of Ti-O-Ag in 10 wt% Ag-MTN was found to decrease the photoactivity due to the decrease in the formation of Ag 0 , TSD and OV as well as the increase in band gap energy. The photodegradation of 5 wt% Ag-MTN followed a pseudo-first-order Langmuir- Hinshelwood model and the catalyst was still stable after five cycles.

  13. Document reconstruction by layout analysis of snippets

    Science.gov (United States)

    Kleber, Florian; Diem, Markus; Sablatnig, Robert

    2010-02-01

    Document analysis is done to analyze entire forms (e.g. intelligent form analysis, table detection) or to describe the layout/structure of a document. Also skew detection of scanned documents is performed to support OCR algorithms that are sensitive to skew. In this paper document analysis is applied to snippets of torn documents to calculate features for the reconstruction. Documents can either be destroyed by the intention to make the printed content unavailable (e.g. tax fraud investigation, business crime) or due to time induced degeneration of ancient documents (e.g. bad storage conditions). Current reconstruction methods for manually torn documents deal with the shape, inpainting and texture synthesis techniques. In this paper the possibility of document analysis techniques of snippets to support the matching algorithm by considering additional features are shown. This implies a rotational analysis, a color analysis and a line detection. As a future work it is planned to extend the feature set with the paper type (blank, checked, lined), the type of the writing (handwritten vs. machine printed) and the text layout of a snippet (text size, line spacing). Preliminary results show that these pre-processing steps can be performed reliably on a real dataset consisting of 690 snippets.

  14. Applications for electronic documents

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1995-01-01

    This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

  15. Visible-light photoactivity of plasmonic silver supported on mesoporous TiO{sub 2} nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: Limitation of Ag-Ti interaction

    Energy Technology Data Exchange (ETDEWEB)

    Jaafar, N.F. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, UTM, 81310 Johor Bahru, Johor (Malaysia); Jalil, A.A., E-mail: aishahaj@utm.my [Centre of Hydrogen Energy, Institute of Future Energy, Universiti Teknologi Malaysia, UTM, 81310 Johor Bahru, Johor (Malaysia); Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, UTM, 81310 Johor Bahru, Johor (Malaysia); Triwahyono, S. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, UTM, 81310 Johor Bahru, Johor (Malaysia); Centre for Sustainable Nanomaterials, Ibnu Sina Institute for Scientific and Industrial Research, Universiti Teknologi Malaysia, UTM, 81310 Johor Bahru, Johor (Malaysia)

    2017-01-15

    Highlights: • Ag{sup 0} loaded on MTN was prepared by a direct in-situ electrochemical method. • The introduction of Ag{sup 0} lowers the band gap and increases the number of OV and TSD. • Ag{sup 0} acted as an electrons trapper and also a plasmonic sensitizer. • The formation of Ti-O-Ag in 10 wt% Ag-MTN decreased the amount of Ag{sup 0}, TSD and OV. • 5 wt% Ag-MTN gave the highest percentage of photodegradation of 2-CP. - Abstract: Various weight loadings of Ag (1–10 wt.%) were introduced to mesoporous titania nanoparticles (MTN) via a direct in-situ electrochemical method. The catalysts were characterized by XRD, surface area analysis, FTIR, ESR, FESEM-EDX and TEM. Characterization results indicated that the introduction of Ag onto MTN decreased the particles size and band gap of the MTN while increasing the number of oxygen vacancies (OV) and Ti{sup 3+} site defects (TSD). The activity performance of Ag-MTN on photodegradation of 2-chlorophenol (2-CP) under visible light irradiation was in the following order: 5 wt% Ag-MTN> 1 wt% Ag-MTN > MTN > 10 wt% Ag-MTN, with degradation percentages of 97, 88, 80 and 63%, respectively. The synergistic effect between Ag{sup 0} and MTN seemed to play an important role in the system. The Ag0 acted as both an electron trap and a plasmonic sensitizer which suppressed the electron-hole recombination, while OV and TSD in the MTN accelerated the production of hydroxyl radicals for enhanced degradation of 2-CP. However, the formation of Ti-O-Ag in 10 wt% Ag-MTN was found to decrease the photoactivity due to the decrease in the formation of Ag{sup 0}, TSD and OV as well as the increase in band gap energy. The photodegradation of 5 wt% Ag-MTN followed a pseudo-first-order Langmuir- Hinshelwood model and the catalyst was still stable after five cycles.

  16. Structured clinical documentation in the electronic medical record to improve quality and to support practice-based research in epilepsy.

    Science.gov (United States)

    Narayanan, Jaishree; Dobrin, Sofia; Choi, Janet; Rubin, Susan; Pham, Anna; Patel, Vimal; Frigerio, Roberta; Maurer, Darryck; Gupta, Payal; Link, Lourdes; Walters, Shaun; Wang, Chi; Ji, Yuan; Maraganore, Demetrius M

    2017-01-01

    Using the electronic medical record (EMR) to capture structured clinical data at the point of care would be a practical way to support quality improvement and practice-based research in epilepsy. We describe our stepwise process for building structured clinical documentation support tools in the EMR that define best practices in epilepsy, and we describe how we incorporated these toolkits into our clinical workflow. These tools write notes and capture hundreds of fields of data including several score tests: Generalized Anxiety Disorder-7 items, Neurological Disorders Depression Inventory for Epilepsy, Epworth Sleepiness Scale, Quality of Life in Epilepsy-10 items, Montreal Cognitive Assessment/Short Test of Mental Status, and Medical Research Council Prognostic Index. The tools summarize brain imaging, blood laboratory, and electroencephalography results, and document neuromodulation treatments. The tools provide Best Practices Advisories and other clinical decision support when appropriate. The tools prompt enrollment in a DNA biobanking study. We have thus far enrolled 231 patients for initial visits and are starting our first annual follow-up visits and provide a brief description of our cohort. We are sharing these EMR tools and captured data with other epilepsy clinics as part of a Neurology Practice Based Research Network, and are using the tools to conduct pragmatic trials using subgroup-based adaptive designs. © 2016 The Authors. Epilepsia published by Wiley Periodicals, Inc. on behalf of International League Against Epilepsy.

  17. Hanford spent nuclear fuel project recommended path forward, volume III: Alternatives and path forward evaluation supporting documentation

    International Nuclear Information System (INIS)

    Fulton, J.C.

    1994-10-01

    Volume I of the Hanford Spent Nuclear Fuel Project - Recommended Path Forward constitutes an aggressive series of projects to construct and operate systems and facilities to safely retrieve, package, transport, process, and store K Basins fuel and sludge. Volume II provided a comparative evaluation of four Alternatives for the Path Forward and an evaluation for the Recommended Path Forward. Although Volume II contained extensive appendices, six supporting documents have been compiled in Volume III to provide additional background for Volume II

  18. Assessing the potential success of cystic fibrosis carrier screening: lessons learned from Tay-Sachs disease and beta-thalassemia.

    Science.gov (United States)

    Laberge, A-M; Watts, C; Porter, K; Burke, W

    2010-01-01

    The objective of this study was to identify factors involved in the success of 2 well-established population-based carrier screening programs - Tay-Sachs disease (TSD) in Ashkenazi Jews and beta-thalassemia in Sardinia and Cyprus - and to assess the potential for success of a population-based cystic fibrosis (CF) carrier screening strategy using these factors. We performed a literature review and key informant interviews. Factors involved in the success of TSD and beta-thalassemia carrier screening programs include disease characteristics (well-defined population at risk, severe disease with predictable course, availability of effective treatment), test characteristics (high sensitivity, straightforward interpretation of results), and community characteristics (involvement of community, support of families and advocacy groups, consensus in favor of avoiding affected births). Current CF screening strategies include few of the factors listed above. Unlike TSD and beta-thalassemia, the purpose of current CF carrier screening strategies is informed reproductive decision-making, without an explicit goal of reducing disease incidence. When compared to TSD and beta-thalassemia, CF is a less favorable candidate for population-based carrier screening. Because of its different purpose, CF carrier screening will require different measures of success than those used for TSD and beta-thalassemia carrier screening, and a consensus on the value or success of CF carrier screening may be difficult to achieve.

  19. Does the mechanism of sex determination constrain the potential for sex manipulation? A test in geckos with contrasting sex-determining systems

    Science.gov (United States)

    Kratochvíl, Lukáš; Kubička, Lukáš; Landová, Eva

    2008-03-01

    The concentration of yolk steroids was suggested to influence offspring gender in oviparous animals subject to both temperature-dependent sex determination (TSD) and genotypic sex determination (GSD). However, the proposed mechanisms of steroid effects are thought to differ between TSD and GSD: a direct effect of oestrogens on gonad feminisation in TSD species vs a differential induction of male-producing or female-producing gametes in GSD species. Geckos offer an ideal opportunity for testing these suggested mechanisms. Closely related gecko species differ in their modes of sex determination. They lay clutches of two synchronously formed eggs; both eggs share equal steroid levels. If identical hormonal composition and environment during vitellogenesis, gravidity and incubation determine the sex of the progeny, siblings should share the same gender in both TSD and GSD geckos. We found strong support for this prediction in a TSD gecko species. Among clutches that were incubated at the temperature that produced both sexes, there were no clutches with siblings of the opposite sex. On the other hand, about half of the clutches yielded siblings of the opposite sex in four GSD species. These results suggest that sex-determining systems constrain the ability of the female to produce single-sex siblings and, hence, it seems that the GSD mechanism constrains the opportunities for sex ratio manipulation in geckos via yolk steroid manipulation.

  20. Canister storage building design basis accident analysis documentation

    International Nuclear Information System (INIS)

    KOPELIC, S.D.

    1999-01-01

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  1. Supporting documentation for requested exceptions to standing orders 96-36 (East) and 96-34 (West)

    Energy Technology Data Exchange (ETDEWEB)

    Schofield, J.S.

    1997-01-16

    On November 1, 1996 the U.S. Department of Energy (DOE), Richland Operations Office (RL) approved the Flammable Gas Unreviewed Safety Question (USQ) (Wagoner 1996). The Tank Waste Remediation System issued (Hall 1996) two standing orders (96-36 East; and 96-34 West) to implement the requirements and authorization for continued operations included in the RL letter (Wagoner 199E). These standing orders included several requirements for the control of ignition sources (Appendix B, Section 7.0 ``Ignition Source Controls``) that include requirements for the design and operation of ``...equipment and materials used in the conduct of work...`` in Tank Farms. A verbatim compliance review of these ignition source controls identified several pieces of equipment and materials which have been used routinely in Tanks Farms for many years in support of safe operation that either could not: meet the equivalent design or safety provisions included in the standing orders (Hall 1996), or 21. be modified in a timely manner to meet safety and programmatic commitments. When the standing order was prepared it was anticipated that there would be a need to approve temporary exceptions. Appendix B, Section 7.0 of the standing order (Hall 1996) reads in part as follows: ``For activities where compliance will require modification to equipment or new materials, any temporary exceptions specifically allowed by RL until full compliance with the standing order is accomplished, are listed in Table 3.`` This document provides a specific listing of the items of equipment or material that could not meet the above two criteria. Also included in a table for each item is the following information: 1. the applicable control in the standing orders that could not be met, 2. under what conditions (when) the control could not be met, 3. a discussion of the applicability of the standing order, 4. a discussion of the risk associated with continued use of the equipment or material, and 5. a discussion of the

  2. Building the Capacity to Innovate: The Role of Human Capital--Support Document

    Science.gov (United States)

    Smith, Andrew; Courvisanos, Jerry; Tuck, Jacqueline; McEachern, Steven

    2012-01-01

    This document was produced by the authors based on their research for the report "Building the Capacity to Innovate: The Role of Human Capital," and is an added resource for further information. This document contains the following appendices: (1) Survey methodology; (2) Synopsis of the literature; (3) Interview questions; and (4) Survey…

  3. Canister storage building design basis accident analysis documentation

    Energy Technology Data Exchange (ETDEWEB)

    KOPELIC, S.D.

    1999-02-25

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  4. Adeno-Associated Virus Gene Therapy in a Sheep Model of Tay-Sachs Disease.

    Science.gov (United States)

    Gray-Edwards, Heather L; Randle, Ashley N; Maitland, Stacy A; Benatti, Hector R; Hubbard, Spencer M; Canning, Peter F; Vogel, Matthew B; Brunson, Brandon L; Hwang, Misako; Ellis, Lauren E; Bradbury, Allison M; Gentry, Atoska S; Taylor, Amanda R; Wooldridge, Anne A; Wilhite, Dewey R; Winter, Randolph L; Whitlock, Brian K; Johnson, Jacob A; Holland, Merilee; Salibi, Nouha; Beyers, Ronald J; Sartin, James L; Denney, Thomas S; Cox, Nancy R; Sena-Esteves, Miguel; Martin, Douglas R

    2018-03-01

    Tay-Sachs disease (TSD) is a fatal neurodegenerative disorder caused by a deficiency of the enzyme hexosaminidase A (HexA). TSD also occurs in sheep, the only experimental model of TSD that has clinical signs of disease. The natural history of sheep TSD was characterized using serial neurological evaluations, 7 Tesla magnetic resonance imaging, echocardiograms, electrodiagnostics, and cerebrospinal fluid biomarkers. Intracranial gene therapy was also tested using AAVrh8 monocistronic vectors encoding the α-subunit of Hex (TSD α) or a mixture of two vectors encoding both the α and β subunits separately (TSD α + β) injected at high (1.3 × 10 13 vector genomes) or low (4.2 × 10 12 vector genomes) dose. Delay of symptom onset and/or reduction of acquired symptoms were noted in all adeno-associated virus-treated sheep. Postmortem evaluation showed superior HexA and vector genome distribution in the brain of TSD α + β sheep compared to TSD α sheep, but spinal cord distribution was low in all groups. Isozyme analysis showed superior HexA formation after treatment with both vectors (TSD α + β), and ganglioside clearance was most widespread in the TSD α + β high-dose sheep. Microglial activation and proliferation in TSD sheep-most prominent in the cerebrum-were attenuated after gene therapy. This report demonstrates therapeutic efficacy for TSD in the sheep brain, which is on the same order of magnitude as a child's brain.

  5. Total and partial sleep deprivation: Effects on plasma TNF-αRI, TNF-αRII, and IL-6, and reversal by caffeine operating through adenosine A2 receptor

    Science.gov (United States)

    Shearer, William T.; Reuben, James M.; Lee, Bang-Ning; Mullington, Janet; Price, Nicholas; Dinges, David F.

    2000-01-01

    Plasma levels of IL-6 and TNF-α are elevated in individuals who are deprived of sleep. TNF-α regulates expression of its soluble receptors, sTNF-αRI and sTNF-αRII. Sleep deprivation (SD) also increases extracellular adenosine that induces sedation and sleep. An antagonist of adenosine, caffeine, raises exogenous adenosine levels, stimulates the expression of IL-6 and inhibits the release of TNF-α. Our objective was to determine the effect of total SD (TSD) or partial SD (PSD) on the levels of these sleep regulatory molecules in volunteers who experienced SD with or without the consumption of caffeine. Plasma levels of IL-6, sTNF-αRI and sTNF-αRII were assayed by ELISA in samples collected at 90-min intervals from each subject over an 88-hour period. The results were analyzed by the repeated measures ANOVA. Whereas only TSD significantly increased sTNF-αRI over time, caffeine suppressed both sTNF-α receptors in TSD and PSD subjects. The selective increase in the expression of sTNF-αRI and not sTNF-αRII in subjects experiencing TSD with caffeine compared with others experiencing PSD with caffeine has not been previously reported. Moreover, caffeine significantly increased IL-6 in TSD subjects compared with those who did not receive caffeine. However, subjects who were permitted intermittent naps (PSD) ablated the effects of caffeine and reduced their level of IL-6 to that of the TSD group. These data further lend support to the hypothesis that the sTNF-αRI and not the sTNF-αRII plays a significant role in sleep regulation by TNF-α. .

  6. Canadian safeguards research and development in support of the IAEA program document outlining the various tasks which comprise the program

    International Nuclear Information System (INIS)

    1985-12-01

    Canada has established a safeguards research and development program, the purpose of which is to supplement the resources of the International Atomic Energy Agency. The program of support is a coordinated effort for the development and application of safeguards techniques and instruments to facilities safeguarded by the IAEA. This document sets forth those tasks which comprise the program

  7. Supporting the Co-operative Organisation of Rational Energy Use (SCORE). Bulgaria Country Document

    International Nuclear Information System (INIS)

    2000-12-01

    SCORE stands for Supporting the Co-operative Organisation of Rational Energy Use. It aims at assisting the social transformation in the Central and Eastern European countries by creating self-supporting structures that are able to stimulate the efficient use of energy in end-user sectors. This document aims at presenting an in-depth institutional analysis of the energy efficiency situation in Bulgaria, including the current situation with regard to energy supply, consumption and environmental aspects, as well as an analysis of energy efficiency policies, instruments and organisations. Also, the document identifies problems related to energy efficiency in Bulgaria and indicates the areas of actions for an integrated SCORE programme in Bulgaria. The input for this process was provided by a survey among the main actors in the field, consisting of a questionnaire and interviews and a review of available information. The results were discussed in a workshop attended by the main stakeholders. The main characteristics of the Bulgarian energy sector are summarised in chapter 2. They indicate a high dependency on imported resources, a low quality of domestic fuels, a relatively high energy intensity of production and a low efficiency at supply and demand side with consider able potential for improvement. The restructuring of the sector has started but the process is far from completed. In the main towns heat is mainly supplied by district heating generated partly in co-generation plants. Gas distribution for public and residential buildings is quickly developing. In Chapter 3 the existing policies and actors are described and a 'roadmap' for energy efficiency actors is given. This provides the basis for defining the priorities for energy efficiency improvements presented in Chapter 4, by analysing the tools, policy instruments and organisations. Barriers and priority actions were defined in relation to the national policy level, the institutional structure, financial and

  8. Drinking-water criteria document for uranium. Draft report

    International Nuclear Information System (INIS)

    1991-06-01

    The document provides the health effects basis to be considered in establishing the MCLG for uranium. To achieve the objective, data on pharmacokinetics, human exposure, acute and chronic toxicity to animals and humans, epidemiology and the mechanisms of toxicity were evaluated. Specific emphasis is placed on literature data providing dose-response information. Thus, while the literature search and evaluation performed in support of the document was comprehensive, only the reports considered most pertinent in the derivation of the MCLG are cited in the document. The comprehensive literature search in support of the analysis of health effects, exposure and occurrence in the document includes information published up to January, 1991; however, more recent information may have been added during the review process

  9. Technical Support Document: 50% Energy Savings for Quick-Service Restaurants

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jian; Schrock, D. W.; Fisher, D. R.; Livchak, A.; Zabrowski, D. A.; Athalye, Rahul A.; Liu, Bing

    2010-09-30

    Document describing PNNL's project to develop a package of energy efficiency measures that demonstrate the feasibility of achieving a 50% energy savings for quick-service restaurants with a simple payback of 5 years or less.

  10. Documentation of a decision framework to support enhanced sludge washing

    International Nuclear Information System (INIS)

    Brothers, A.J.

    1995-01-01

    This document describes a proposed decision model that, if developed to its fullest, can provide a wide range of analysis options and insights to pretreatment/sludge washing alternatives. A recent decision has been made to terminate this work

  11. PULPAL BLOOD FLOW CHANGES IN ABUTMENT TEETH OF REMOVABLE PARTIAL DENTURES

    Science.gov (United States)

    Kunt, Göknil Ergün; Kökçü, Deniz; Ceylan, Gözlem; Yılmaz, Nergiz; Güler, Ahmet Umut

    2009-01-01

    The purpose of this study was to investigate the effect of tooth supported (TSD) and toothtissue supported (TTSD) removable partial denture wearing on pulpal blood flow (PBF) of the abutment teeth by using Laser Doppler Flowmeter (LDF). Measurements were carried out on 60 teeth of 28 patients (28 teeth and 12 patients of TTSD group, 32 teeth and 16 patients of TSD group) who had not worn any type of removable partial dentures before, had no systemic problems and were non smokers. PBF values were recorded by LDF before insertion (day 0) and after insertion of dentures at day 1, day 7 and day 30. Statistical analysis was performed by student t test and covariance analyses of repeated measurements. In the group TTSD, the mean values of PBF decreased statistically significantly at day 1 after insertion when compared with PBF values before insertion (p<0,01). There was no statistically significant difference among PBF mean values on 1st, 7th and 30th day. However, in the group TSD, there was no statistically significant difference among PBF mean values before insertion and on 1st, 7th and 30th day. In other words, PBF mean values in group TSD continued without changing statistically significant on 1st, 7th and 30th day. TTSD wearing may show negative effect on the abutment teeth due to decreasing basal PBF. PMID:20001995

  12. Pulpal blood flow changes in abutment teeth of removable partial dentures

    Directory of Open Access Journals (Sweden)

    Göknil Ergün Kunt

    2009-11-01

    Full Text Available The purpose of this study was to investigate the effect of tooth supported (TSD and toothtissue supported (TTSD removable partial denture wearing on pulpal blood flow (PBF of the abutment teeth by using Laser Doppler Flowmeter (LDF.Measurements were carried out on 60 teeth of 28 patients (28 teeth and 12 patients of TTSD group, 32 teeth and 16 patients of TSD group who had not worn any type of removable partial dentures before, had no systemic problems and were non smokers. PBF values were recorded by LDF before insertion (day 0 and after insertion of dentures at day 1, day 7 and day 30. Statistical analysis was performed by student t test and covariance analyses of repeated measurements.In the group TTSD, the mean values of PBF decreased statistically significantly at day 1 after insertion when compared with PBF values before insertion (p<0,01. There was no statistically significant difference among PBF mean values on 1st, 7th and 30th day. However, in the group TSD, there was no statistically significant difference among PBF mean values before insertion and on 1st, 7th and 30th day. In other words, PBF mean values in group TSD continued without changing statistically significant on 1st, 7th and 30th day.TTSD wearing may show negative effect on the abutment teeth due to decreasing basal PBF.

  13. NILDE, Network Inter Library Document Exchange: An Italian Document Delivery System

    Science.gov (United States)

    Brunetti, F.; Gasperini, A.; Mangiaracina, S.

    2007-10-01

    This poster presents NILDE, a document delivery system supporting the exchange of documents via the internet. The system has been set up by the Central Library of the National Research Council of Bologna (Italy) in order to make use of new internet technology, to promote cooperation between Italian university libraries and research libraries, and to achieve quick response times in satisfying DD requests. The Arcetri Astrophysical Observatory Library was the first astronomical library to join the NILDE project from its earliest days in 2002. Many were the reasons for this choice: automation of the DD processes, security and reliability of the network, creation of usage statistics and reports, reduction of DD System management costs and so on. This work describes the benefits of NILDE and discusses the role of an organized document delivery system as an important tool to cope with the difficult constraints of the publishing market.

  14. Supplemental Information Source Document Waste Management

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Craig [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Halpern, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wrons, Ralph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reiser, Anita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mond, Michael du [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shain, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    This Supplemental Information Source Document for Waste Management was prepared in support of future analyses including those that may be performed as part of the Sandia National Laboratories, New Mexico (SNL/NM) Site-Wide Environmental Impact Statement. This document presents information about waste management practices at SNL/NM, including definitions, inventory data, and an overview of current activities.

  15. Cold Vacuum Drying Facility Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    PIEPHO, M.G.

    1999-01-01

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report, ''Cold Vacuum Drying Facility Final Safety Analysis Report (FSAR).'' All assumptions, parameters and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR

  16. Document boundary determination using structural and lexical analysis

    Science.gov (United States)

    Taghva, Kazem; Cartright, Marc-Allen

    2009-01-01

    The document boundary determination problem is the process of identifying individual documents in a stack of papers. In this paper, we report on a classification system for automation of this process. The system employs features based on document structure and lexical content. We also report on experimental results to support the effectiveness of this system.

  17. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.; PIEPHO, M.G.

    2000-01-01

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  18. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.

    1999-01-01

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  19. Semantic Metadata for Heterogeneous Spatial Planning Documents

    Science.gov (United States)

    Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

    2016-09-01

    Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  20. Changing Landscapes in Documentation Efforts : Civil Society Documentation of Serious Human Rights Violations

    NARCIS (Netherlands)

    Mc Gonigle, B.N.

    2017-01-01

    Wittingly or unwittingly, civil society actors have long been faced with the task of documenting serious human rights violations. Thirty years ago, such efforts were largely organised by grassroots movements, often with little support or funding from international actors. Sharing information and

  1. Protective effects of exercise training on endothelial dysfunction induced by total sleep deprivation in healthy subjects.

    Science.gov (United States)

    Sauvet, Fabien; Arnal, Pierrick J; Tardo-Dino, Pierre Emmanuel; Drogou, Catherine; Van Beers, Pascal; Bougard, Clément; Rabat, Arnaud; Dispersyn, Garance; Malgoyre, Alexandra; Leger, Damien; Gomez-Merino, Danielle; Chennaoui, Mounir

    2017-04-01

    Sleep loss is a risk factor for cardiovascular events mediated through endothelial dysfunction. To determine if 7weeks of exercise training can limit cardiovascular dysfunction induced by total sleep deprivation (TSD) in healthy young men. 16 subjects were examined during 40-h TSD, both before and after 7weeks of interval exercise training. Vasodilatation induced by ACh, insulin and heat (42°C) and pulse wave velocity (PWV), blood pressure and heart rate (HR) were assessed before TSD (controlday), during TSD, and after one night of sleep recovery. Biomarkers of endothelial activation, inflammation, and hormones were measured from morning blood samples. Before training, ACh-, insulin- and heat-induced vasodilatations were significantly decreased during TSD and recovery as compared with the control day, with no difference after training. Training prevented the decrease of ACh-induced vasodilation related to TSD after sleep recovery, as well as the PWV increase after TSD. A global lowering effect of training was found on HR values during TSD, but not on blood pressure. Training induces the decrease of TNF-α concentration after TSD and prevents the increase of MCP-1 after sleep recovery. Before training, IL-6 concentrations increased. Cortisol and testosterone decreased after TSD as compared with the control day, while insulin and E-selectin increased after sleep recovery. No effect of TSD or training was found on CRP and sICAM-1. In healthy young men, a moderate to high-intensity interval training is effective at improving aerobic fitness and limiting vascular dysfunction induced by TSD, possibly through pro-inflammatory cytokine responses.(ClinicalTrial:NCT02820649). Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Software documentation for TRU certification program

    International Nuclear Information System (INIS)

    CLINTON, R.

    1999-01-01

    The document provides validation information for software used to support TRU operational activities. Calculations were performed using a spreadsheet application. This document provides information about the usage of the software application, Microsoft(reg s ign) Excel. Microsoft(reg s ign) Excel spreadsheets were used to perform specific calculations to determine the amount of containers to visually examine and to perform analyses on container head-gas data. Contained in this document are definitions of formulas and variables with relation to the Excel codes used. Also, a demonstration is provided using predetermined values to obtain predetermined results

  3. Geographic patterns of at-risk species: A technical document supporting the USDA Forest Service Interim Update of the 2000 RPA Assessment

    Science.gov (United States)

    Curtis H. Flather; Michael S. Knowles; Jason McNees

    2008-01-01

    This technical document supports the Forest Service's requirement to assess the status of renewable natural resources as mandated by the Forest and Rangeland Renewable Resources Planning Act of 1974. It updates past reports on the trends and geographic patterns of species formally listed as threatened or endangered under the Endangered Species Act of 1973. We...

  4. Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

    Energy Technology Data Exchange (ETDEWEB)

    Honma, George [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-10-01

    The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will be used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).

  5. Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

    International Nuclear Information System (INIS)

    Honma, George

    2015-01-01

    The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will be used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).

  6. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1993-01-01

    This Mined Geologic Disposal System Requirements document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) and commercial and defense high level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The development and control of the MGDS-RD is quality-affecting work and is subject to the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements Document (QARD). As part of the technical requirements baseline, it is also subject to Baseline Management Plan controls. The MGDS-RD and the other program-level requirements documents have been prepared and managed in accordance with the Technical Document Preparation Plan (TDPP) for the Preparation of System Requirements Documents

  7. Earth System Documentation (ES-DOC) Preparation for CMIP6

    Science.gov (United States)

    Denvil, S.; Murphy, S.; Greenslade, M. A.; Lawrence, B.; Guilyardi, E.; Pascoe, C.; Treshanksy, A.; Elkington, M.; Hibling, E.; Hassell, D.

    2015-12-01

    During the course of 2015 the Earth System Documentation (ES-DOC) project began its preparations for CMIP6 (Coupled Model Inter-comparison Project 6) by further extending the ES-DOC tooling ecosystem in support of Earth System Model (ESM) documentation creation, search, viewing & comparison. The ES-DOC online questionnaire, the ES-DOC desktop notebook, and the ES-DOC python toolkit will serve as multiple complementary pathways to generating CMIP6 documentation. It is envisaged that institutes will leverage these tools at different points of the CMIP6 lifecycle. Institutes will be particularly interested to know that the documentation burden will be either streamlined or completely automated.As all the tools are tightly integrated with the ES-DOC web-service, institutes can be confident that the latency between documentation creation & publishing will be reduced to a minimum. Published documents will be viewable with the online ES-DOC Viewer (accessible via citable URL's). Model inter-comparison scenarios will be supported using the ES-DOC online Comparator tool. The Comparator is being extended to:• Support comparison of both Model descriptions & Simulation runs;• Greatly streamline the effort involved in compiling official tables.The entire ES-DOC ecosystem is open source and built upon open standards such as the Common Information Model (CIM) (versions 1 and 2).

  8. Private Training Providers: Their Characteristics and Training Activities. Support Document

    Science.gov (United States)

    Harris, Roger; Simons, Michele; McCarthy, Carmel

    2006-01-01

    This document was produced by the authors based on their research for the report, "Private Training Providers: Their Characteristics and Training Activities," [ED495181] and is an added resource for further information. That study examined the nature of the training activity of private registered training organisations (RTOs) offered to…

  9. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  10. SEMANTIC METADATA FOR HETEROGENEOUS SPATIAL PLANNING DOCUMENTS

    Directory of Open Access Journals (Sweden)

    A. Iwaniak

    2016-09-01

    Full Text Available Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa. The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

  11. Documentation of spectrom-32

    International Nuclear Information System (INIS)

    Callahan, G.D.; Fossum, A.F.; Svalstad, D.K.

    1989-01-01

    SPECTROM-32 is a finite element program for analyzing two-dimensional and axisymmetric inelastic thermomechanical problems related to the geological disposal of nuclear waste. The code is part of the SPECTROM series of special-purpose computer programs that are being developed by RE/SPEC Inc. to address many unique rock mechanics problems encountered in analyzing radioactive wastes stored in geologic formations. This document presents the theoretical basis for the mathematical models, the finite element formulation and solution procedure of the program, a description of the input data for the program, verification problems, and details about program support and continuing documentation. The computer code documentation is intended to satisfy the requirements and guidelines outlined in the document entitled Final Technical Position on Documentation of Computer Codes for High-Level Waste Management. The principal component models used in the program involve thermoelastic, thermoviscoelastic, thermoelastic-plastic, and thermoviscoplastic types of material behavior. Special material considerations provide for the incorporation of limited-tension material behavior and consideration of jointed material behavior. Numerous program options provide the capabilities for various boundary conditions, sliding interfaces, excavation, backfill, arbitrary initial stresses, multiple material domains, load incrementation, plotting database storage and access of results, and other features unique to the geologic disposal of radioactive wastes. Numerous verification problems that exercise many of the program options and illustrate the required data input and printed results are included in the documentation

  12. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    Energy Technology Data Exchange (ETDEWEB)

    CROWE, R.D.

    1999-09-09

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  13. The Role of Memory in Document Re-finding

    DEFF Research Database (Denmark)

    Xie, X; Sonnenwald, Diane H.; Fulton, Crystal

    2015-01-01

    . For participants the act of organizing documents is itself a memory aid. Participants’ recommendations for PIM tools include support for information organization and simplistic visualizations that can be customized, e.g., using colour to highlight folders or documents. Research limitations......Purpose – The purpose of this paper is to explore graduate students’ behaviour and perspectives regarding personal digital document management, as well as insights into the connections between memory and document re-finding. Design/methodology/approach – Semi-structured interviews were conducted...

  14. Parallel optoelectronic trinary signed-digit division

    Science.gov (United States)

    Alam, Mohammad S.

    1999-03-01

    The trinary signed-digit (TSD) number system has been found to be very useful for parallel addition and subtraction of any arbitrary length operands in constant time. Using the TSD addition and multiplication modules as the basic building blocks, we develop an efficient algorithm for performing parallel TSD division in constant time. The proposed division technique uses one TSD subtraction and two TSD multiplication steps. An optoelectronic correlator based architecture is suggested for implementation of the proposed TSD division algorithm, which fully exploits the parallelism and high processing speed of optics. An efficient spatial encoding scheme is used to ensure better utilization of space bandwidth product of the spatial light modulators used in the optoelectronic implementation.

  15. Documenting success of energy management cost reduction initiatives

    International Nuclear Information System (INIS)

    Stewart, A.

    1993-01-01

    The scope of this paper is to offer methods to document energy saving projects. The examples used are based on actual industrial facilities. I will define concepts to be used in the analysis of the industrial work place energy consumption. With the concepts defined we can begin to apply the documentation strategy for some specific examples. Why should we be interested in auditing the results of energy projects? Nearly every industrial facility has embarked on the road to energy efficiency. As one of my plant engineer associates relates open-quotes If all our energy saving programs were working as stated the power company would be paying us.close quotes The underlying principles in this statement are true. Does it mean we as technicians, engineers and managers of energy projects have failed? No, we have however failed to finish the job and document there results. My experience has shown there is good support and enthusiasm for those energy projects we begin. It is also my experience that a well documented successful project provides many levels of satisfaction. Large energy management projects involve a major financial commitment. Documenting the results provides all those who supported the project from finance, management and the technical staff the positive reinforcement to support your future projects. We should begin by defining what an energy audit is and what is the expected result of an audit

  16. Born Broken: Fonts and Information Loss in Legacy Digital Documents

    Directory of Open Access Journals (Sweden)

    Geoffrey Brown

    2011-03-01

    Full Text Available For millions of legacy documents, correct rendering depends upon resources such as fonts that are not generally embedded within the document structure. Yet there is a significant risk of information loss due to missing or incorrectly substituted fonts. Large document collections depend on thousands of unique fonts not available on a common desktop workstation, which typically has between 100 and 200 fonts. Silent substitution of fonts, performed by applications such as Microsoft Office, can yield poorly rendered documents. In this paper we use a collection of 230,000 Word documents to assess the difficulty of matching font requirements with a database of fonts. We describe the identifying information contained in common font formats, font requirements stored in Word documents, the API provided by Windows to support font requests by applications, the documented substitution algorithms used by Windows when requested fonts are not available, and the ways in which support software might be used to control font substitution in a preservation environment.

  17. Transitioning Existing Content: inferring organisation-specific documents

    Directory of Open Access Journals (Sweden)

    Arijit Sengupta

    2000-11-01

    Full Text Available A definition for a document type within an organization represents an organizational norm about the way the organizational actors represent products and supporting evidence of organizational processes. Generating a good organization-specific document structure is, therefore, important since it can capture a shared understanding among the organizational actors about how certain business processes should be performed. Current tools that generate document type definitions focus on the underlying technology, emphasizing tags created in a single instance document. The tools, thus, fall short of capturing the shared understanding between organizational actors about how a given document type should be represented. We propose a method for inferring organization-specific document structures using multiple instance documents as inputs. The method consists of heuristics that combine individual document definitions, which may have been compiled using standard algorithms. We propose a number of heuristics utilizing artificial intelligence and natural language processing techniques. As the research progresses, the heuristics will be tested on a suite of test cases representing multiple instance documents for different document types. The complete methodology will be implemented as a research prototype

  18. LDRD 149045 final report distinguishing documents.

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Scott A.

    2010-09-01

    This LDRD 149045 final report describes work that Sandians Scott A. Mitchell, Randall Laviolette, Shawn Martin, Warren Davis, Cindy Philips and Danny Dunlavy performed in 2010. Prof. Afra Zomorodian provided insight. This was a small late-start LDRD. Several other ongoing efforts were leveraged, including the Networks Grand Challenge LDRD, and the Computational Topology CSRF project, and the some of the leveraged work is described here. We proposed a sentence mining technique that exploited both the distribution and the order of parts-of-speech (POS) in sentences in English language documents. The ultimate goal was to be able to discover 'call-to-action' framing documents hidden within a corpus of mostly expository documents, even if the documents were all on the same topic and used the same vocabulary. Using POS was novel. We also took a novel approach to analyzing POS. We used the hypothesis that English follows a dynamical system and the POS are trajectories from one state to another. We analyzed the sequences of POS using support vector machines and the cycles of POS using computational homology. We discovered that the POS were a very weak signal and did not support our hypothesis well. Our original goal appeared to be unobtainable with our original approach. We turned our attention to study an aspect of a more traditional approach to distinguishing documents. Latent Dirichlet Allocation (LDA) turns documents into bags-of-words then into mixture-model points. A distance function is used to cluster groups of points to discover relatedness between documents. We performed a geometric and algebraic analysis of the most popular distance functions and made some significant and surprising discoveries, described in a separate technical report.

  19. Best Entry Points for Structured Document Retrieval - Part I: Characteristics

    DEFF Research Database (Denmark)

    Reid, Jane; Lalmas, Mounia; Finesilver, Karen

    2006-01-01

    Structured document retrieval makes use of document components as the basis of the retrieval process, rather than complete documents. The inherent relationships between these components make it vital to support users' natural browsing behaviour in order to offer effective and efficient access...

  20. Evaluation of the risk for Tay-Sachs disease in individuals of French Canadian ancestry living in new England.

    Science.gov (United States)

    Martin, Dianna C; Mark, Brian L; Triggs-Raine, Barbara L; Natowicz, Marvin R

    2007-03-01

    The assessment of risk for Tay-Sachs disease (TSD) in individuals of French Canadian background living in New England is an important health issue. In preliminary studies of the enzyme-defined carrier frequency for TSD among Franco-Americans in New England, we found frequencies (1:53) higher than predicted from the incidence of infantile TSD in this region. We have now further evaluated the risk for TSD in the Franco-American population of New England. Using a fluorescence-based assay for beta-hexosaminidase activity, we determined the carrier frequencies for TSD in 2783 Franco-Americans. DNA analysis was used to identify mutations causing enzyme deficiency in TSD carriers. We determined the enzyme-defined carrier frequency for TSD as 1:65 (95% confidence interval 1:49 to 1:90). DNA-based analysis of 24 of the enzyme-defined carriers revealed 21 with sequence changes: 9 disease-causing, 4 benign, and 8 of unknown significance. Six of the unknowns were identified as c.748G>A p.G250S, a mutation we show by expression analysis to behave similarly to the previously described c.805G>A p.G269S adult-onset TSD mutation. This putative adult-onset TSD c.748G>A p.G250S mutation has a population frequency similar to the common 7.6 kb deletion mutation that occurs in persons of French Canadian ancestry. We estimate the frequency of deleterious TSD alleles in Franco-Americans to be 1:73 (95% confidence interval 1:55 to 1:107). These data provide a more complete data base from which to formulate policy recommendations regarding TSD heterozygosity screening in individuals of French Canadian background.

  1. Triaxiality and the wobbling mode In 167Lu

    International Nuclear Information System (INIS)

    Amro, H.; Ma, W.C.; Winger, J.A.; Li, Y.; Thompson, J.; Hagemann, G.; Herskind, B.; Sletten, G.; Wilson, J.N.; Jensen, D.R.; Fallon, P.; Ward, D.; Diamond, R.M.; Goergen, A.; Machiavelli, A.; Huebel, H.; Domscheit, J.; Wiedenhoewer, I.

    2002-01-01

    High spin states in 167Lu nucleus were populated through the 123Sb(48Ca,xn) reaction at 203 MeV. Five presumably triaxial superdeformed (TSD) bands have been found. The electromagnetic properties of several connecting transitions between the yrast (TSD1) and the excited (TSD2) bands have been established. Evidence for the assignment of TSD2 band as a wobbling mode built on the yrast TSD band is presented. These bands coexist with bands built on quasiparticle excitations in normal deformed (ND) minimum for which new data are also presented

  2. Cold Vacuum Drying (CVD) Facility Design Basis Accident Analysis Documentation

    Energy Technology Data Exchange (ETDEWEB)

    PIEPHO, M.G.

    1999-10-20

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report, ''Cold Vacuum Drying Facility Final Safety Analysis Report (FSAR).'' All assumptions, parameters and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR.

  3. DOE evaluation document for DOT 7A Type A packaging

    International Nuclear Information System (INIS)

    Edling, D.A.; Hopkins, D.R.; Williams, R.L.

    1987-03-01

    This document is a support document for the ''DOE Evaluation Document for DOT 7A Type A Packaging,'' MLM-3245, March 1987. Provided herein are details concerning the performance requirements specified in 178.350 Specification 7A, General Packaging, Type A. MLM-3245 references appropriate sections in this document. This document does not by itself meet the documentation requirements specified in 49 CFR 173.415 and has compliance value only when used in conjunction with MLM-3245

  4. Non-disability Repository for Evidentiary Documents

    Data.gov (United States)

    Social Security Administration — Contains data that supports the electronic storage of paper documents or electronic files not addressed by other initiatives such as electronic Disability (eDib) and...

  5. Simplifying documentation while approaching site closure: integrated health and safety plans as documented safety analysis

    International Nuclear Information System (INIS)

    Brown, Tulanda

    2003-01-01

    At the Fernald Closure Project (FCP) near Cincinnati, Ohio, environmental restoration activities are supported by Documented Safety Analyses (DSAs) that combine the required project-specific Health and Safety Plans, Safety Basis Requirements (SBRs), and Process Requirements (PRs) into single Integrated Health and Safety Plans (I-HASPs). By isolating any remediation activities that deal with Enriched Restricted Materials, the SBRs and PRs assure that the hazard categories of former nuclear facilities undergoing remediation remain less than Nuclear. These integrated DSAs employ Integrated Safety Management methodology in support of simplified restoration and remediation activities that, so far, have resulted in the decontamination and demolition (D and D) of over 150 structures, including six major nuclear production plants. This paper presents the FCP method for maintaining safety basis documentation, using the D and D I-HASP as an example

  6. TWRS technical baseline database manager definition document

    International Nuclear Information System (INIS)

    Acree, C.D.

    1997-01-01

    This document serves as a guide for using the TWRS Technical Baseline Database Management Systems Engineering (SE) support tool in performing SE activities for the Tank Waste Remediation System (TWRS). This document will provide a consistent interpretation of the relationships between the TWRS Technical Baseline Database Management software and the present TWRS SE practices. The Database Manager currently utilized is the RDD-1000 System manufactured by the Ascent Logic Corporation. In other documents, the term RDD-1000 may be used interchangeably with TWRS Technical Baseline Database Manager

  7. 24 CFR 891.825 - Mixed-finance closing documents.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must submit...

  8. Document retrieval on repetitive string collections.

    Science.gov (United States)

    Gagie, Travis; Hartikainen, Aleksi; Karhu, Kalle; Kärkkäinen, Juha; Navarro, Gonzalo; Puglisi, Simon J; Sirén, Jouni

    2017-01-01

    Most of the fastest-growing string collections today are repetitive, that is, most of the constituent documents are similar to many others. As these collections keep growing, a key approach to handling them is to exploit their repetitiveness, which can reduce their space usage by orders of magnitude. We study the problem of indexing repetitive string collections in order to perform efficient document retrieval operations on them. Document retrieval problems are routinely solved by search engines on large natural language collections, but the techniques are less developed on generic string collections. The case of repetitive string collections is even less understood, and there are very few existing solutions. We develop two novel ideas, interleaved LCPs and precomputed document lists , that yield highly compressed indexes solving the problem of document listing (find all the documents where a string appears), top- k document retrieval (find the k documents where a string appears most often), and document counting (count the number of documents where a string appears). We also show that a classical data structure supporting the latter query becomes highly compressible on repetitive data. Finally, we show how the tools we developed can be combined to solve ranked conjunctive and disjunctive multi-term queries under the simple [Formula: see text] model of relevance. We thoroughly evaluate the resulting techniques in various real-life repetitiveness scenarios, and recommend the best choices for each case.

  9. Comparison of approaches for mobile document image analysis using server supported smartphones

    Science.gov (United States)

    Ozarslan, Suleyman; Eren, P. Erhan

    2014-03-01

    With the recent advances in mobile technologies, new capabilities are emerging, such as mobile document image analysis. However, mobile phones are still less powerful than servers, and they have some resource limitations. One approach to overcome these limitations is performing resource-intensive processes of the application on remote servers. In mobile document image analysis, the most resource consuming process is the Optical Character Recognition (OCR) process, which is used to extract text in mobile phone captured images. In this study, our goal is to compare the in-phone and the remote server processing approaches for mobile document image analysis in order to explore their trade-offs. For the inphone approach, all processes required for mobile document image analysis run on the mobile phone. On the other hand, in the remote-server approach, core OCR process runs on the remote server and other processes run on the mobile phone. Results of the experiments show that the remote server approach is considerably faster than the in-phone approach in terms of OCR time, but adds extra delays such as network delay. Since compression and downscaling of images significantly reduce file sizes and extra delays, the remote server approach overall outperforms the in-phone approach in terms of selected speed and correct recognition metrics, if the gain in OCR time compensates for the extra delays. According to the results of the experiments, using the most preferable settings, the remote server approach performs better than the in-phone approach in terms of speed and acceptable correct recognition metrics.

  10. City Reach Code Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chen, Yan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Frankel, Mark [New Buildings Inst., Portland, OR (United States); Lyles, Mark [New Buildings Inst., Portland, OR (United States)

    2017-10-31

    This report describes and analyzes a set of energy efficiency measures that will save 20% energy over ASHRAE Standard 90.1-2013. The measures will be used to formulate a Reach Code for cities aiming to go beyond national model energy codes. A coalition of U.S. cities together with other stakeholders wanted to facilitate the development of voluntary guidelines and standards that can be implemented in stages at the city level to improve building energy efficiency. The coalition's efforts are being supported by the U.S. Department of Energy via Pacific Northwest National Laboratory (PNNL) and in collaboration with the New Buildings Institute.

  11. Onsite transportation of radioactive materials at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, R.

    2015-03-03

    The Savannah River Site (SRS) Transportation Safety Document (TSD) defines the onsite packaging and transportation safety program at SRS and demonstrates its compliance with Department of Energy (DOE) transportation safety requirements, to include DOE Order 460.1C, DOE Order 461.2, Onsite Packaging and Transfer of Materials of National Security Interest, and 10 CFR 830, Nuclear Safety Management (Subpart B).

  12. Technical documentation in support of the project-specific analysis for construction and operation of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, M.A.; Vinikour, W. [Argonne National Lab., IL (United States). Environmental Assessment Div.; Allison, T. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.] [and others

    1996-09-01

    This document provides information that supports or supplements the data and impact analyses presented in the National Ignition Facility (NIF) Project-Specific Analysis (PSA). The purposes of NIF are to achieve fusion ignition in the laboratory for the first time with inertial confinement fusion (ICF) technology and to conduct high- energy-density experiments ins support of national security and civilian application. NIF is an important element in the DOE`s science-based SSM Program, a key mission of which is to ensure the reliability of the nation`s enduring stockpile of nuclear weapons. NIF would also advance the knowledge of basic and applied high-energy- density science and bring the nation a large step closer to developing fusion energy for civilian use. The NIF PSA includes evaluations of the potential environmental impacts of constructing and operating the facility at one of five candidate site and for two design options.

  13. Designing Documents for People to Use

    Directory of Open Access Journals (Sweden)

    David Sless

    Full Text Available This article reports on the work of Communication Research Institute (CRI, an international research center specializing in communication and information design. With the support of government, regulators, industry bodies, and business—and with the participation of people and their advocates—CRI has worked on over 200 public document design projects since it began as a small unit in 1985. CRI investigates practical methods and achievable standards for designing digital and paper public documents, including forms; workplace procedural notices; bills, letters, and emails sent by organizations; labels and instructions that accompany products and services; and legal and financial documents and contracts. CRI has written model grammars for the document types it designs, and the cumulative data from CRI projects has led to a set of systematic methods for designing public-use documents to a high standard. Through research, design, publishing, and advocacy, CRI works to measurably improve the ordinary documents we all have to use. Keywords: Information design, Design methods, Design standards, Communication design, Design diagnostic testing, Design research

  14. Tay Sachs disease in Australia: reduced disease incidence despite stable carrier frequency in Australian Jews.

    Science.gov (United States)

    Lew, Raelia M; Proos, Anne L; Burnett, Leslie; Delatycki, Martin; Bankier, Agnes; Fietz, Michael J

    2012-12-10

    To evaluate the outcomes of preconception screening of Jewish Australians for Tay Sachs disease (TSD) carrier status on Jewish TSD-affected births. Epidemiological observational study involving a complete retrospective audit of infantile and intermediate TSD cases diagnosed in Sydney and Melbourne between 1 January 1995 and 31 December 2011 (Royal Children's Hospital Melbourne; Pacific Laboratory Medicine Services, Pathology North, NSW Health Pathology, Sydney; Victorian Clinical Genetics Services, Melbourne; and SA Pathology, Adelaide), and carrier frequency among Jewish high school students attending schools participating in TSD screening programs over the same period. Jewish TSD carrier frequency; and expected versus observed Jewish TSD-affected births. The 2006 Census indicated that most of the total 88,826 Jewish Australians live in Melbourne (46%) and Sydney (40%). The 7,756 Jewish high school students screened for TSD in Sydney and Melbourne during the study period had a carrier frequency of one in 31 (3.26%; 95% CI, 2.89%-3.68%).The estimated expected number of TSD-affected births in Melbourne and Sydney in 1995-2011 was 4.1 for Jewish births and 7.4 for other births (a ratio of Jewish to non-Jewish births of 1:2). The actual number was 12 (four in Sydney and eight in Melbourne), of which two were Jewish (a ratio of Jewish to non-Jewish births of 1:5). This finding of fewer than expected Jewish TSD cases coincided with a period during which screening programs were operating. There have been no Jewish TSD-affected children born to parents who were screened previously. Community education, appreciation of autosomal recessive inheritance and genetic carrier screening before pregnancy are the likely factors in our finding of fewer than expected Jewish babies with TSD. Ongoing outcome monitoring must continue.

  15. System Documentation AS Basis For Company Business Process Improvement

    OpenAIRE

    Pelawi, Dewan

    2012-01-01

    Business process is an activity performed together to achieve business goals. Good business process will support the achievement of the organization’s plan to make profit for the company. In order to understand the business process, the business process needs to be documented and analyzed. The purpose of research is to make the system documentation as a basis to improve or complete the ongoing business process. The research method is system documentation. System documentation is a way to desc...

  16. Recognition techniques for extracting information from semistructured documents

    Science.gov (United States)

    Della Ventura, Anna; Gagliardi, Isabella; Zonta, Bruna

    2000-12-01

    Archives of optical documents are more and more massively employed, the demand driven also by the new norms sanctioning the legal value of digital documents, provided they are stored on supports that are physically unalterable. On the supply side there is now a vast and technologically advanced market, where optical memories have solved the problem of the duration and permanence of data at costs comparable to those for magnetic memories. The remaining bottleneck in these systems is the indexing. The indexing of documents with a variable structure, while still not completely automated, can be machine supported to a large degree with evident advantages both in the organization of the work, and in extracting information, providing data that is much more detailed and potentially significant for the user. We present here a system for the automatic registration of correspondence to and from a public office. The system is based on a general methodology for the extraction, indexing, archiving, and retrieval of significant information from semi-structured documents. This information, in our prototype application, is distributed among the database fields of sender, addressee, subject, date, and body of the document.

  17. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation

    International Nuclear Information System (INIS)

    Puech Suanzes, P.; Cortes Soler, M.

    1993-01-01

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  18. Development of spatial data guidelines and standards: spatial data set documentation to support hydrologic analysis in the U.S. Geological Survey

    Science.gov (United States)

    Fulton, James L.

    1992-01-01

    Spatial data analysis has become an integral component in many surface and sub-surface hydrologic investigations within the U.S. Geological Survey (USGS). Currently, one of the largest costs in applying spatial data analysis is the cost of developing the needed spatial data. Therefore, guidelines and standards are required for the development of spatial data in order to allow for data sharing and reuse; this eliminates costly redevelopment. In order to attain this goal, the USGS is expanding efforts to identify guidelines and standards for the development of spatial data for hydrologic analysis. Because of the variety of project and database needs, the USGS has concentrated on developing standards for documenting spatial sets to aid in the assessment of data set quality and compatibility of different data sets. An interim data set documentation standard (1990) has been developed that provides a mechanism for associating a wide variety of information with a data set, including data about source material, data automation and editing procedures used, projection parameters, data statistics, descriptions of features and feature attributes, information on organizational contacts lists of operations performed on the data, and free-form comments and notes about the data, made at various times in the evolution of the data set. The interim data set documentation standard has been automated using a commercial geographic information system (GIS) and data set documentation software developed by the USGS. Where possible, USGS developed software is used to enter data into the data set documentation file automatically. The GIS software closely associates a data set with its data set documentation file; the documentation file is retained with the data set whenever it is modified, copied, or transferred to another computer system. The Water Resources Division of the USGS is continuing to develop spatial data and data processing standards, with emphasis on standards needed to support

  19. Recovery Sleep Reverses Impaired Response Inhibition due to Sleep Restriction: Evidence from a Visual Event Related Potentials Study.

    Directory of Open Access Journals (Sweden)

    Xiao Jin

    Full Text Available To investigate response inhibition after total sleep deprivation (TSD and the restorative effects of one night of recovery sleep (RS.Fourteen healthy male participants performed a visual Go/NoGo task, and electroencephalogram recordings were conducted at five time points: (1 baseline, (2 after 12 h of TSD, (3 after 24 h of TSD, (4 after 36 h of TSD, and (5 following 8 h of RS. The dynamic changes in response inhibition during TSD and after 8 h of RS were investigated by examining the NoGo-N2 and NoGo-P3 event-related potential components.Compared with baseline, NoGo-P3 amplitudes were decreased, while the NoGo-N2 latency increased along with the awake time prolonged. NoGo anteriorization, which was minimized after 24 h of TSD, progressively decreased with increasing TSD. After 8 h of RS, recoveries of both the NoGo-P3 amplitude and NoGo-N2 latency in the prefrontal cortex were observed compared with the values after 36 h of TSD.TSD induced a dose-dependent functional decline in the response inhibition of NoGo-N2 and NoGo-P3 on prefrontal cortex activation, and 8 h of RS resulted in recovery or maintenance of the response inhibition. However, it was not restored to baseline levels.Participants were chosen male college students only, thus the findings cannot be generalized to older people and women. Additionally, the sample size was small, and, thus, speculations on the meaning of the results of this study should be cautious. The EEG continuous recording should be employed to monitor the decline of alertness following TSD.

  20. A documentation tool for product configuration systems - improving the documentation task

    DEFF Research Database (Denmark)

    Hvam, Lars; Jensen, Klaes Ladeby

    2005-01-01

    's experience with the procedure and the hitherto empirical experience from companies having applied the procedure have revealed that there is a need for an IT-based docu-mentation tool to support the process of constructing product configuration systems. Time can be saved by letting a documentation tool handle......Configuration systems are increasingly applied to automate the configuration of complex products. A configuration system is an expert system designed to combine specified modules according to constraints. The constraints are stored as product data and rules in a product model, and one of the most...... essential tasks is thus to develop a complete and consistent product model which can reflect the actual product. A procedure for building product models has been developed at the Centre for Product Modelling (CPM), and the pro-cedure has been successfully applied in several industrial companies. CPM...

  1. Case study on traceable, transparent documentation to support decision-making on nuclear waste disposal

    International Nuclear Information System (INIS)

    McNeish, J.A.; Andrews, R.W.; Sevougian, S.D.; Dockery, H.A.; Wilson, M.L.; Gauthier, J.H.; Barnard, R.W.; Gaither, K.N.

    1999-01-01

    The recent assessment of the Yucca Mountain potential repository attempted to develop transparent and traceable documentation. The assessment was largely successful in this effort, providing meaningful graphics and easy to understand descriptions of the analyses for multiple audiences. While there are obviously many areas in the modeling and data collection that could be improved with sufficient resources, the document has been well received as an accurate, understandable assessment of the analyses. A few difficulties were encountered in the efforts to produce transparent and traceable documentation of the performance assessment analyses. Streamlining the text from a typical technical document to more of a layman's document, was not always easy. The data transfer steps that are proceduralized were not always smooth, as we worked out some of the bugs in the data transfer system. For some of the graphics, there was a mismatch between the analyst's hardware/software and the production hardware/software, causing difficulties in printing the graphics. One thing that was clear as the many organizations worked to pull the document together, is that relationships between people are still necessary in spite of all the technology brought to bear on the problem. A high level of cooperation and integration is necessary for the process to work smoothly. Significant effort is being made to continue to improve the processes that lead to traceability. Multiple teams are taking the sequencing of models/data apart and finding all of the transfers required as the project moves toward Site Recommendation and potential licensing. Likewise, the effort to achieve transparency is evolving and will improve with the next iteration of the analyses

  2. Preparation, in-vitro and in-vivo evaluation of spray-dried ternary solid dispersion of biopharmaceutics classification system class II model drug.

    Science.gov (United States)

    Paidi, Sharan K; Jena, Sunil K; Ahuja, Bhupesh K; Devasari, Naresh; Suresh, Sarasija

    2015-05-01

    The objective of this study was to investigate the impact of a novel spray-dried ternary solid dispersion (TSD) on the dissolution rate and bioavailability of a biopharmaceutics classification system (BCS) class II model drug, atorvastatin calcium trihydrate (ATC), and evaluate its in-vitro and in-vivo performance. TSD of ATC was prepared by spray-drying method employing ethanol/water solvent systems. The TSD formulations, composed of hydroxypropyl methylcellulose (HPMC E5) and nicotinamide, were optimized by rotatable central composite design. Physicochemical characterization along with dissolution, stability and pharmacokinetic study of optimized TSD was evaluated. The optimized TSD was found to be amorphous with spherical shape morphology. It exhibited a fourfold increase in dissolution rate in comparison to ATC, with a considerable enhancement in oral bioavailability (relative bioavailability of 134.11%). Physicochemical characterization and dissolution study of optimized TSD at the end of stability studies clearly indicated that the stability of optimized TSD was due to hydrogen bonding between drug and HPMC E5 and nicotinamide. This bonding remained unaffected even under stressful conditions of high temperature and humidity. The TSD exhibits a significant increase in dissolution rate, and for this reason should be useful as an efficacious tool to enhance the bioavailability of BCS class II drug molecule, ATC. © 2015 Royal Pharmaceutical Society.

  3. Ashkenazi Jewish population screening for Tay-Sachs disease: the international and Australian experience.

    Science.gov (United States)

    Lew, Raelia M; Burnett, Leslie; Proos, Anné L; Barlow-Stewart, Kristine; Delatycki, Martin B; Bankier, Agnes; Aizenberg, Harry; Field, Michael J; Berman, Yemima; Fleischer, Ronald; Fietz, Michael

    2015-03-01

    Internationally, Tay-Sachs disease (TSD) preconception screening of Ashkenazi Jewish (AJ) individuals and couples has led to effective primary prevention of TSD. In Australia, adolescent preconception genetic screening programs operate mainly in Jewish community high schools. These existing programs offer an effective means of primary prevention of TSD, are cost effective and safe. However, in the broader Australian community TSD screening is not systematically performed and cases still occur in unscreened AJ individuals. In order to improve the effectiveness of Australian screening, there is a need for definitive guidelines for healthcare professionals to facilitate extension of the proven benefits of preconception TSD screening to all AJ individuals at risk. We performed a systematic review of the relevant literature relating to AJ pre-conception and antenatal screening for TSD. The evidence was assessed using an established National Health and Medical Research Council evidence grading system. Evaluations of efficacy of TSD screening programs design and execution, cost-benefit and cost-utility health economic evaluation, and population outcomes were undertaken. The results have been used to propose a model for universal AJ TSD preconception and antenatal screening for the primary care setting. © 2014 The Authors. Journal of Paediatrics and Child Health © 2014 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  4. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-02-18

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  5. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-03-03

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  6. Documentation of spectrom-41

    International Nuclear Information System (INIS)

    Svalstad, D.K.

    1989-01-01

    SPECTROM-41 is a finite element heat transfer computer program developed to analyze thermal problems related to nuclear waste disposal. The code is part of the SPECTROM (Special Purpose Engineering Codes for Thermal/ROck Mechanics) series of special purpose finite element programs that are continually being developed by RE/SPEC Inc. (RSI) to address the many unique formations. This document presents the theoretical basis for the mathematical model, the finite element formulation of the program, and a description of the input data for the program, along with details about program support and continuing documentation. The documentation is intended to satisfy the requirements and guidelines outlined in NUREG-0856. The principal component model used in the programs based on Fourier's law of conductance. Numerous program options provide the capability of considering various boundary conditions, material stratification and anisotropy, and time-dependent heat generation that are characteristic of problems involving the disposal of nuclear waste in geologic formation. Numerous verification problems are included in the documentation in addition to highlights of past and ongoing verification and validation efforts. A typical repository problem is solving using SPECTROM-41 to demonstrate the use of the program in addressing problems related to the disposal of nuclear waste

  7. Drinking-water-criteria document for phthalic acid esters (PAES). Final report

    International Nuclear Information System (INIS)

    1991-08-01

    The document provides the health effects basis to be considered in establishing the MCLG. To achieve the objective, data on pharmacokinetics human exposure, acute and chronic toxicity to animals and humans, epidemiology and mechanisms of toxicity are evaluated for phthalic acid esters. Specific emphasis is placed on literature data providing dose-response information. Thus, while the literature search and evaluation performed in support of the document has been comprehensive, only the reports considered most pertinent in the derivation of the MCLG are cited in the document. The comprehensive literature data base in support of the document includes information published up to 1986; however, more recent data may have been added during the review process

  8. Short-term memory deficits correlate with hippocampal-thalamic functional connectivity alterations following acute sleep restriction.

    Science.gov (United States)

    Chengyang, Li; Daqing, Huang; Jianlin, Qi; Haisheng, Chang; Qingqing, Meng; Jin, Wang; Jiajia, Liu; Enmao, Ye; Yongcong, Shao; Xi, Zhang

    2017-08-01

    Acute sleep restriction heavily influences cognitive function, affecting executive processes such as attention, response inhibition, and memory. Previous neuroimaging studies have suggested a link between hippocampal activity and short-term memory function. However, the specific contribution of the hippocampus to the decline of short-term memory following sleep restriction has yet to be established. In the current study, we utilized resting-state functional magnetic resonance imaging (fMRI) to examine the association between hippocampal functional connectivity (FC) and the decline of short-term memory following total sleep deprivation (TSD). Twenty healthy adult males aged 20.9 ± 2.3 years (age range, 18-24 years) were enrolled in a within-subject crossover study. Short-term memory and FC were assessed using a Delay-matching short-term memory test and a resting-state fMRI scan before and after TSD. Seed-based correlation analysis was performed using fMRI data for the left and right hippocampus to identify differences in hippocampal FC following TSD. Subjects demonstrated reduced alertness and a decline in short-term memory performance following TSD. Moreover, fMRI analysis identified reduced hippocampal FC with the superior frontal gyrus (SFG), temporal regions, and supplementary motor area. In addition, an increase in FC between the hippocampus and bilateral thalamus was observed, the extent of which correlated with short-term memory performance following TSD. Our findings indicate that the disruption of hippocampal-cortical connectivity is linked to the decline in short-term memory observed after acute sleep restriction. Such results provide further evidence that support the cognitive impairment model of sleep deprivation.

  9. Great Lakes water quality initiative technical support document for the procedure to determine bioaccumulation factors. Draft report

    International Nuclear Information System (INIS)

    1993-03-01

    The purpose of the document is to provide the technical information and rationale in support of the proposed procedures to determine bioaccumulation factors. Bioaccumulation factors, together with the quantity of aquatic organisms eaten, determine the extent to which people and wildlife are exposed to chemicals through the consumption of aquatic organisms. The more bioaccumulative a pollutant is, the more important the consumption of aquatic organisms becomes as a potential source of contaminants to humans and wildlife. Bioaccumulation factors are needed to determine both human health and wildlife tier I water quality criteria and tier II values. Also, they are used to define Bioaccumulative Chemicals of Concern among the Great Lakes Initiative universe of pollutants. Bioaccumulation factors range from less than one to several million

  10. The Use of Supporting Documentation for Information Architecture by Australian Libraries

    Science.gov (United States)

    Hider, Philip; Burford, Sally; Ferguson, Stuart

    2009-01-01

    This article reports the results of an online survey that examined the development of information architecture of Australian library Web sites with reference to documented methods and guidelines. A broad sample of library Web managers responded from across the academic, public, and special sectors. A majority of libraries used either in-house or…

  11. Effect of exogenous estradiol applied at different embryonic stages on sex determination, growth, and mortality in the leopard gecko (Eublepharis macularius).

    Science.gov (United States)

    Tousignant, A; Crews, D

    1994-01-01

    Temperature-dependent sex determination (TSD) occurs in three orders of reptiles. Several studies have examined the ability of estradiol to produce female hatchlings incubated at a male-producing temperature. The results of these experiments support the idea that estradiol could be used as a powerful tool in the conservation of endangered species with TSD by manipulating hatchling sex ratios. However, these experiments have concentrated on the mechanism of determination. This experiment was designed to test the efficacy of various dosages of estradiol applied at two different stages to alter the hatchling sex ratio as well as determining the potential use of such manipulation for conservation efforts by monitoring egg mortality and hatchling growth. The leopard gecko (Eublepharis macularius) exhibits TSD and reaches reproductive maturity in less than one year, making it an excellent model for evaluating the long-term effects of estradiol. The results demonstrate that estradiol has a dose-dependent effect on the hatchling sex ratio while only high dosages applied at the later stage of development showed increased mortality. Estrogen-determined females grew at the same rate as temperature-determined females and have produced viable hatchlings. Estradiol treatment of eggs from endangered species may provide a method of insuring female offspring when the TSD pattern is unknown or equipment for controlled incubation is unavailable.

  12. Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicable to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).

  13. Thermal Skin Damage During Reirradiation and Hyperthermia Is Time-Temperature Dependent

    Energy Technology Data Exchange (ETDEWEB)

    Bakker, Akke, E-mail: akke.bakker@amc.uva.nl [Department of Radiation Oncology, Academic Medical Center (AMC), Amsterdam (Netherlands); Kolff, M. Willemijn [Department of Radiation Oncology, Academic Medical Center (AMC), Amsterdam (Netherlands); Holman, Rebecca [Clinical Research Unit, Academic Medical Center (AMC), Amsterdam (Netherlands); Leeuwen, Caspar M. van; Korshuize-van Straten, Linda; Kroon-Oldenhof, Rianne de; Rasch, Coen R.N.; Tienhoven, Geertjan van; Crezee, Hans [Department of Radiation Oncology, Academic Medical Center (AMC), Amsterdam (Netherlands)

    2017-06-01

    Purpose: To investigate the relationship of thermal skin damage (TSD) to time–temperature isoeffect levels for patients with breast cancer recurrence treated with reirradiation plus hyperthermia (reRT + HT), and to investigate whether the treatment history of previous treatments (scar tissue) is a risk factor for TSD. Methods and Materials: In this observational study, temperature characteristics of hyperthermia sessions were analyzed in 262 patients with recurrent breast cancer treated in the AMC between 2010 and 2014 with reirradiation and weekly hyperthermia for 1 hour. Skin temperature was measured using a median of 42 (range, 29-82) measurement points per hyperthermia session. Results: Sixty-eight patients (26%) developed 79 sites of TSD, after the first (n=26), second (n=17), third (n=27), and fourth (n=9) hyperthermia session. Seventy percent of TSD occurred on or near scar tissue. Scar tissue reached higher temperatures than other skin tissue (0.4°C, P<.001). A total of 102 measurement points corresponded to actual TSD sites in 35 of 79 sessions in which TSD developed. Thermal skin damage sites had much higher maximum temperatures than non-TSD sites (2.8°C, P<.001). Generalized linear mixed models showed that the probability of TSD is related to temperature and thermal dose values (P<.001) and that scar tissue is more at risk (odds ratio 0.4, P<.001). Limiting the maximum temperature of a measurement point to 43.7°C would mean that the probability of observing TSD was at most 5%. Conclusion: Thermal skin damage during reRT + HT for recurrent breast cancer was related to higher local temperatures and time–temperature isoeffect levels. Scar tissue reached higher temperatures than other skin tissue, and TSD occurred at lower temperatures and thermal dose values in scar tissue compared with other skin tissue. Indeed, TSD developed often on and around scar tissue from previous surgical procedures.

  14. Supporting document for the historical tank content estimate for SY-tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.

    1997-08-12

    The purpose of this historical characterization document is to present the synthesized summaries of the historical records concerning the physical characteristics, radiological, and chemical composition of mixed wastes stored in underground double-shell tanks and the physical condition of these tanks. The double-shell tanks are located on the United States Department of Energy`s Hanford Site, approximately 25 miles northwest or Richland, Washington. The document will be used to assist in characterizing the waste in the tanks in conjunction with the current program of sampling and analyzing the tank wastes. Los Alamos National Laboratory (LANL) developed computer models that used the historical data to attempt to characterize the wastes and to generate estimates of each tank`s inventory. A historical review of the tanks may reveal anomalies or unusual contents that could be critical to characterization and post characterization activities. This document was developed by reviewing the operating plant process histories, waste transfer data, and available physical and chemical data from numerous resources. These resources were generated by numerous contractors from 1945 to the present. Waste characterization, the process of describing the character or quality of a waste, is required by Federal law (Resource Conservation and Recovery Act [RCRA]) and state law (Washington Administrative Code [WAC] 173-303, Dangerous Waste Regulations). Characterizing the waste is necessary to determine methods to safely retrieve, transport, and/or treat the wastes.

  15. Supporting document for the historical tank content estimate for SY-tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.

    1997-01-01

    The purpose of this historical characterization document is to present the synthesized summaries of the historical records concerning the physical characteristics, radiological, and chemical composition of mixed wastes stored in underground double-shell tanks and the physical condition of these tanks. The double-shell tanks are located on the United States Department of Energy's Hanford Site, approximately 25 miles northwest or Richland, Washington. The document will be used to assist in characterizing the waste in the tanks in conjunction with the current program of sampling and analyzing the tank wastes. Los Alamos National Laboratory (LANL) developed computer models that used the historical data to attempt to characterize the wastes and to generate estimates of each tank's inventory. A historical review of the tanks may reveal anomalies or unusual contents that could be critical to characterization and post characterization activities. This document was developed by reviewing the operating plant process histories, waste transfer data, and available physical and chemical data from numerous resources. These resources were generated by numerous contractors from 1945 to the present. Waste characterization, the process of describing the character or quality of a waste, is required by Federal law (Resource Conservation and Recovery Act CRA and state law (Washington Administrative Code AC 173-303, Dangerous Waste Regulations). Characterizing the waste is necessary to determine methods to safely retrieve, transport, and/or treat the wastes

  16. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    Science.gov (United States)

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  17. Aiding the Interpretation of Ancient Documents

    DEFF Research Database (Denmark)

    Roued-Cunliffe, Henriette

    How can Decision Support System (DSS) software aid the interpretation process involved in the reading of ancient documents? This paper discusses the development of a DSS prototype for the reading of ancient texts. In this context the term ‘ancient documents’ is used to describe mainly Greek...... tool it is important first to comprehend the interpretation process involved in reading ancient documents. This is not a linear process but rather a recursive process where the scholar moves between different levels of reading, such as ‘understanding the meaning of a character’ or ‘understanding...

  18. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  19. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  20. Documenting Climate Models and Simulations: the ES-DOC Ecosystem in Support of CMIP

    Science.gov (United States)

    Pascoe, C. L.; Guilyardi, E.

    2017-12-01

    The results of climate models are of increasing and widespread importance. No longer is climate model output of sole interest to climate scientists and researchers in the climate change impacts and adaptation fields. Now non-specialists such as government officials, policy-makers, and the general public, all have an increasing need to access climate model output and understand its implications. For this host of users, accurate and complete metadata (i.e., information about how and why the data were produced) is required to document the climate modeling results. Here we describe the ES-DOC community-govern project to collect and make available documentation of climate models and their simulations for the internationally coordinated modeling activity CMIP6 (Coupled Model Intercomparison Project, Phase 6). An overview of the underlying standards, key properties and features, the evolution from CMIP5, the underlying tools and workflows as well as what modelling groups should expect and how they should engage with the documentation of their contribution to CMIP6 is also presented.

  1. Guidance document for revision of DOE Order 5820.2A, Radioactive Waste Technical Support Program

    International Nuclear Information System (INIS)

    Kudera, D.E.; McMurtrey, C.D.; Meagher, B.G.

    1993-04-01

    This document provides guidance for the revision of DOE Order 5820.2A, ''Radioactive Waste Management.'' Technical Working Groups have been established and are responsible for writing the revised order. The Technical Working Groups will use this document as a reference for polices and procedures that have been established for the revision process. The overall intent of this guidance is to outline how the order will be revised and how the revision process will be managed. In addition, this document outlines technical issues considered for inclusion by a Department of Energy Steering Committee

  2. Interface control document between Analytical Services and Solid Waste Disposal Division

    International Nuclear Information System (INIS)

    Venetz, T.J.

    1995-01-01

    This interface control document (ICD) between Analytical Services and Solid Waste Disposal (SWD) establishes a baseline description of the support needed and the wastes that will require management as part of the interface between the two divisions. It is important that each division has a clear understanding of the other division's expectations regarding levels and type of support needed. This ICD deals with the waste sampling support needed by SWD and the waste generated by the specified analytical laboratories. The baseline description of wastes includes waste volumes, characteristics and shipping schedules, which will be used to plan the proper support requirements. The laboratories included in this document are 222-S Laboratory Facility, the Waste Sampling and Characterization Facility (WSCF) and the Chemical Engineering Laboratory. These three facilities provide support to the entire site and are not associated with one major program/facility. The laboratories associated with major facilities or programs such as Engineering/Environmental Development Laboratory at K Basins Operation are not within the scope of this document

  3. Supporting documents for LLL area 27 (410 area) safety analysis reports, Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Odell, B. N. [comp.

    1977-02-01

    The following appendices are common to the LLL Safety Analysis Reports Nevada Test Site and are included here as supporting documents to those reports: Environmental Monitoring Report for the Nevada Test Site and Other Test Areas Used for Underground Nuclear Detonations, U. S. Environmental Protection Agency, Las Vegas, Rept. EMSL-LV-539-4 (1976); Selected Census Information Around the Nevada Test Site, U. S. Environmental Protection Agency, Las Vegas, Rept. NERC-LV-539-8 (1973); W. J. Hannon and H. L. McKague, An Examination of the Geology and Seismology Associated with Area 410 at the Nevada Test Site, Lawrence Livermore Laboratory, Livermore, Rept. UCRL-51830 (1975); K. R. Peterson, Diffusion Climatology for Hypothetical Accidents in Area 410 of the Nevada Test Site, Lawrence Livermore Laboratory, Livermore, Rept. UCRL-52074 (1976); J. R. McDonald, J. E. Minor, and K. C. Mehta, Development of a Design Basis Tornado and Structural Design Criteria for the Nevada Test Site, Nevada, Lawrence Livermore Laboratory, Livermore, Rept. UCRL-13668 (1975); A. E. Stevenson, Impact Tests of Wind-Borne Wooden Missiles, Sandia Laboratories, Tonopah, Rept. SAND 76-0407 (1976); and Hydrology of the 410 Area (Area 27) at the Nevada Test Site.

  4. Education in Neurology Resident Documentation Using Payroll Simulation.

    Science.gov (United States)

    Liang, John W; Shanker, Vicki L

    2017-04-01

    Approaches for teaching neurology documentation include didactic lectures, workshops, and face-to-face meetings. Few studies have assessed their effectiveness. To improve the quality of neurology resident documentation through payroll simulation. A documentation checklist was created based on Medicaid and Medicare evaluation and management (E/M) guidelines. In the preintervention phase, neurology follow-up clinic charts were reviewed over a 16-week period by evaluators blinded to the notes' authors. Current E/M level, ideal E/M level, and financial loss were calculated by the evaluators. Ideal E/M level was defined as the highest billable level based on the documented problems, alongside a supporting history and examination. We implemented an educational intervention that consisted of a 1-hour didactic lecture, followed by e-mail feedback "paystubs" every 2 weeks detailing the number of patients seen, income generated, income loss, and areas for improvement. Follow-up charts were assessed in a similar fashion over a 16-week postintervention period. Ten of 11 residents (91%) participated. Of 214 charts that were reviewed preintervention, 114 (53%) had insufficient documentation to support the ideal E/M level, leading to a financial loss of 24% ($5,800). Inadequate documentation was seen in all 3 components: history (47%), examination (27%), and medical decision making (37%). Underdocumentation did not differ across residency years. Postintervention, underdocumentation was reduced to 14% of 273 visits ( P < .001), with a reduction in the financial loss to 6% ($1,880). Improved documentation and increased potential reimbursement was attained following a didactic lecture and a 16-week period in which individual, specific feedback to neurology residents was provided.

  5. India: Kudankulam NPP. Manpower and documentation. Annex 7A

    International Nuclear Information System (INIS)

    Krishnan, S.

    1999-01-01

    This annex deals with manpower and documentation. It illustrates flexibility in personnel retention arising from having a multi-unit, national nuclear power programme, supported by in-house technology. Steps taken to retrain and continually develop personnel are described. Also highlighted is the relative ease with which documentation is obtained and preserved. (author)

  6. Personal information documents for people with dementia: Healthcare staff 's perceptions and experiences.

    Science.gov (United States)

    Baillie, Lesley; Thomas, Nicola

    2018-01-01

    Person-centred care is internationally recognised as best practice for the care of people with dementia. Personal information documents for people with dementia are proposed as a way to support person-centred care in healthcare settings. However, there is little research about how they are used in practice. The aim of this study was to analyse healthcare staff 's perceptions and experiences of using personal information documents, mainly Alzheimer's Society's 'This is me', for people with dementia in healthcare settings. The method comprised a secondary thematic analysis of data from a qualitative study, of how a dementia awareness initiative affected care for people with dementia in one healthcare organisation. The data were collected through 12 focus groups (n = 58 participants) and 1 individual interview, conducted with a range of healthcare staff, both clinical and non-clinical. There are four themes presented: understanding the rationale for personal information documents; completing personal information documents; location for personal information documents and transfer between settings; impact of personal information documents in practice. The findings illuminated how healthcare staff use personal information documents in practice in ways that support person-centred care. Practical issues about the use of personal information documents were revealed and these may affect the optimal use of the documents in practice. The study indicated the need to complete personal information documents at an early stage following diagnosis of dementia, and the importance of embedding their use across care settings, to support communication and integrated care.

  7. Analysis and decision document in support of acquisition of steam supply for the Hanford 200 Area

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.R.; Daellenbach, K.K.; Hendrickson, P.L.; Kavanaugh, D.C.; Reilly, R.W.; Shankle, D.L.; Smith, S.A.; Weakley, S.A.; Williams, T.A. (Pacific Northwest Lab., Richland, WA (United States)); Grant, T.F. (Battelle Human Affairs Research Center, Seattle, WA (United States))

    1992-02-01

    The US Department of Energy (DOE) is now evaluating its facility requirements in support of its cleanup mission at Hanford. One of the early findings is that the 200-Area steam plants, constructed in 1943, will not meet future space heating and process needs. Because the 200 Area will serve as the primary area for waste treatment and long-term storage, a reliable steam supply is a critical element of Hanford operations. This Analysis and Decision Document (ADD) is a preliminary review of the steam supply options available to the DOE. The ADD contains a comprehensive evaluation of the two major acquisition options: line-term versus privatization. It addresses the life-cycle costs associated with each alternative, as well as factors such as contracting requirements and the impact of market, safety, security, and regulatory issues. Specifically, this ADD documents current and future steam requirements for the 200 Area, describes alternatives available to DOE for meeting these requirements, and compares the alternatives across a number of decision criteria, including life-cycle cost. DOE has currently limited the ADD evaluation alternatives to replacing central steam plants rather than expanding the study to include alternative heat sources, such as a distributed network of boilers or heat pumps. Thirteen project alternatives were analyzed in the ADD. One of the alternatives was the rehabilitation of the existing 200-East coal-fired facility. The other twelve alternatives are combinations of (1) coal- or gas-fueled plants, (2) steam-only or cogeneration facilities, (3) primary or secondary cogeneration of electricity, and (4) public or private ownership.

  8. Next-generation DNA sequencing of HEXA: a step in the right direction for carrier screening

    OpenAIRE

    Hoffman, Jodi D; Greger, Valerie; Strovel, Erin T; Blitzer, Miriam G; Umbarger, Mark A; Kennedy, Caleb; Bishop, Brian; Saunders, Patrick; Porreca, Gregory J; Schienda, Jaclyn; Davie, Jocelyn; Hallam, Stephanie; Towne, Charles

    2013-01-01

    Tay-Sachs disease (TSD) is the prototype for ethnic-based carrier screening, with a carrier rate of ∼1/27 in Ashkenazi Jews and French Canadians. HexA enzyme analysis is the current gold standard for TSD carrier screening (detection rate ∼98%), but has technical limitations. We compared DNA analysis by next-generation DNA sequencing (NGS) plus an assay for the 7.6 kb deletion to enzyme analysis for TSD carrier screening using 74 samples collected from participants at a TSD family conference. ...

  9. Basins 4.0 Climate Assessment Tool (Cat): Supporting Documentation and User Manual (External Review Draft)

    Science.gov (United States)

    EPA has released of the draft document solely for the purpose of pre-dissemination peer review under applicable Information Quality Guidelines (IQGs). This document has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agenc...

  10. Wilmar joint market model, Documentation

    International Nuclear Information System (INIS)

    Meibom, P.; Larsen, Helge V.; Barth, R.; Brand, H.; Weber, C.; Voll, O.

    2006-01-01

    The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. The Joint Market Model (JMM) constitutes one of these sub-models. This report documents the Joint Market model (JMM). The documentation describes: 1. The file structure of the JMM. 2. The sets, parameters and variables in the JMM. 3. The equations in the JMM. 4. The looping structure in the JMM. (au)

  11. Wilmar joint market model, Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Meibom, P.; Larsen, Helge V. [Risoe National Lab. (Denmark); Barth, R.; Brand, H. [IER, Univ. of Stuttgart (Germany); Weber, C.; Voll, O. [Univ. of Duisburg-Essen (Germany)

    2006-01-15

    The Wilmar Planning Tool is developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. The Joint Market Model (JMM) constitutes one of these sub-models. This report documents the Joint Market model (JMM). The documentation describes: 1. The file structure of the JMM. 2. The sets, parameters and variables in the JMM. 3. The equations in the JMM. 4. The looping structure in the JMM. (au)

  12. Visible-light photoactivity of plasmonic silver supported on mesoporous TiO2 nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: Limitation of Ag-Ti interaction

    Science.gov (United States)

    Jaafar, N. F.; Jalil, A. A.; Triwahyono, S.

    2017-01-01

    Various weight loadings of Ag (1-10 wt.%) were introduced to mesoporous titania nanoparticles (MTN) via a direct in-situ electrochemical method. The catalysts were characterized by XRD, surface area analysis, FTIR, ESR, FESEM-EDX and TEM. Characterization results indicated that the introduction of Ag onto MTN decreased the particles size and band gap of the MTN while increasing the number of oxygen vacancies (OV) and Ti3+ site defects (TSD). The activity performance of Ag-MTN on photodegradation of 2-chlorophenol (2-CP) under visible light irradiation was in the following order: 5 wt% Ag-MTN> 1 wt% Ag-MTN > MTN > 10 wt% Ag-MTN, with degradation percentages of 97, 88, 80 and 63%, respectively. The synergistic effect between Ag0 and MTN seemed to play an important role in the system. The Ag0 acted as both an electron trap and a plasmonic sensitizer which suppressed the electron-hole recombination, while OV and TSD in the MTN accelerated the production of hydroxyl radicals for enhanced degradation of 2-CP. However, the formation of Ti-O-Ag in 10 wt% Ag-MTN was found to decrease the photoactivity due to the decrease in the formation of Ag0, TSD and OV as well as the increase in band gap energy. The photodegradation of 5 wt% Ag-MTN followed a pseudo-first-order Langmuir- Hinshelwood model and the catalyst was still stable after five cycles.

  13. Free recall of word lists under total sleep deprivation and after recovery sleep.

    Science.gov (United States)

    de Almeida Valverde Zanini, Gislaine; Tufik, Sérgio; Andersen, Monica Levy; da Silva, Raquel Cristina Martins; Bueno, Orlando Francisco Amodeo; Rodrigues, Camila Cruz; Pompéia, Sabine

    2012-02-01

    One task that has been used to assess memory effects of prior total sleep deprivation (TSD) is the immediate free recall of word lists; however, results have been mixed. A possible explanation for this is task impurity, since recall of words from different serial positions reflects use of distinct types of memory (last words: short-term memory; first and intermediate words: episodic memory). Here we studied the effects of 2 nights of TSD on immediate free recall of semantically unrelated word lists considering the serial position curve. Random allocation to a 2-night TSD protocol followed by one night of recovery sleep or to a control group. Study conducted under continuous behavioral monitoring. 24 young, healthy male volunteers. 2 nights of total sleep deprivation (TSD) and one night of recovery sleep. Participants were shown five 15 unrelated word-lists at baseline, after one and 2 nights of TSD, and after one night of recovery sleep. We also investigated the development of recall strategies (learning) and susceptibility to interference from previous lists. No free recall impairment occurred during TSD, irrespective of serial position. Interference was unchanged. Both groups developed recall strategies, but task learning occurred earlier in controls and was evident in the TSD group only after sleep recovery. Prior TSD spared episodic memory, short-term phonological memory, and interference, allowed the development of recall strategies, but may have decreased the advantage of using these strategies, which returned to normal after recovery sleep.

  14. Management of Documents and Information in BSC Secretariat

    International Nuclear Information System (INIS)

    Sumathi, E.; Jayarajan, K.

    2017-01-01

    The regulatory and safety function of BARC facilities is being carried out by BARC Safety Framework with BARC Safety Council as an apex body. Presently, about one hundred safety committees and task forces are functional in the framework. BSC Secretariat (BSCS) provides technical and administrative support to the BARC Safety Framework for the regulatory activities in BARC. Important documents/records related to committee decisions and facilities are maintained in BSCS, through an established documentation and record keeping system. The compliance of regulatory recommendations is verified during regulatory inspections and subsequent submissions made by the facility authority. This supports the effective regulatory decision making of various committees. This article elaborates the maintenance of records and information at BSC

  15. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation; Utilizacion de un sistema documental avanzado en la actualizacion de documentacion post recarga

    Energy Technology Data Exchange (ETDEWEB)

    Puech Suanzes, P; Cortes Soler, M [Empresarios Agrupados, A.I.E., Madrid (Spain)

    1993-12-15

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  16. One-step trinary signed-digit arithmetic using an efficient encoding scheme

    Science.gov (United States)

    Salim, W. Y.; Fyath, R. S.; Ali, S. A.; Alam, Mohammad S.

    2000-11-01

    The trinary signed-digit (TSD) number system is of interest for ultra fast optoelectronic computing systems since it permits parallel carry-free addition and borrow-free subtraction of two arbitrary length numbers in constant time. In this paper, a simple coding scheme is proposed to encode the decimal number directly into the TSD form. The coding scheme enables one to perform parallel one-step TSD arithmetic operation. The proposed coding scheme uses only a 5-combination coding table instead of the 625-combination table reported recently for recoded TSD arithmetic technique.

  17. Trinary signed-digit arithmetic using an efficient encoding scheme

    Science.gov (United States)

    Salim, W. Y.; Alam, M. S.; Fyath, R. S.; Ali, S. A.

    2000-09-01

    The trinary signed-digit (TSD) number system is of interest for ultrafast optoelectronic computing systems since it permits parallel carry-free addition and borrow-free subtraction of two arbitrary length numbers in constant time. In this paper, a simple coding scheme is proposed to encode the decimal number directly into the TSD form. The coding scheme enables one to perform parallel one-step TSD arithmetic operation. The proposed coding scheme uses only a 5-combination coding table instead of the 625-combination table reported recently for recoded TSD arithmetic technique.

  18. REVEAL: Software Documentation and Platform Migration

    Science.gov (United States)

    Wilson, Michael A.; Veibell, Victoir T.; Freudinger, Lawrence C.

    2008-01-01

    The Research Environment for Vehicle Embedded Analysis on Linux (REVEAL) is reconfigurable data acquisition software designed for network-distributed test and measurement applications. In development since 2001, it has been successfully demonstrated in support of a number of actual missions within NASA s Suborbital Science Program. Improvements to software configuration control were needed to properly support both an ongoing transition to operational status and continued evolution of REVEAL capabilities. For this reason the project described in this report targets REVEAL software source documentation and deployment of the software on a small set of hardware platforms different from what is currently used in the baseline system implementation. This report specifically describes the actions taken over a ten week period by two undergraduate student interns and serves as a final report for that internship. The topics discussed include: the documentation of REVEAL source code; the migration of REVEAL to other platforms; and an end-to-end field test that successfully validates the efforts.

  19. The role and design of screen images in software documentation.

    NARCIS (Netherlands)

    van der Meij, Hans

    2000-01-01

    Software documentation for the novice user typically must try to achieve at least three goals: to support basic knowledge and skills development; to prevent or support the handling of mistakes, and to support the joint handling of manual, input device and screen. This paper concentrates on the

  20. Critical issues in an electronic documentation system.

    Science.gov (United States)

    Weir, Charlene R; Nebeker, Jonathan R

    2007-10-11

    The Veterans Health Administration (VHA), of the U.S. Department of Veteran Affairs has instituted a medical record (EMR) that includes electronic documentation of all narrative components of the medical record. To support clinicians using the system, multiple efforts have been instituted to ease the creation of narrative reports. Although electronic documentation is easier to read and improves access to information, it also may create new and additional hazards for users. This study is the first step in a series of studies to evaluate the issues surrounding the creation and use of electronic documentation. Eighty-eight providers across multiple clinical roles were interviewed in 10 primary care sites in the VA system. Interviews were tape-recorded, transcribed and qualitatively analyzed for themes. In addition, specific questions were asked about perceived harm due to electronic documentation practices. Five themes relating to difficulties with electronic documentation were identified: 1) information overload; 2) hidden information; 3) lack of trust; 4) communication; 5) decision-making. Three providers reported that they knew of an incident where current documentation practices had caused patient harm and over 75% of respondents reported significant mis-trust of the system.

  1. Information Retrieval in a Work Setting: A Case Study of the Documentation Part of Chemists’ Work

    DEFF Research Database (Denmark)

    Hertzum, Morten

    1993-01-01

    , partial systems, such as piles with urgent things. Mostly, the final documentation work where documents are made part of the archive is delegated to the secretaries who act as intermediaries between the chemists and the archive. Recently, a comprehensive computer-based filing and retrieval system......The purpose of this study is to gain insight into a group of chemists’ documentation work in a large, international enterprise. The main concern is how filing is organized to support subsequent retrieval without overloading the primary work. The chemists’ documentation work is based on individual...... was implemented, primarily supporting the final documentation work. However, to some extent it is also the intention that the chemists shall use this system. The study identifies certain problematic issues in providing computer support for documentation work, but technical solutions are not offered....

  2. Evacuation support system for improved medical documentation and information flow in the field.

    Science.gov (United States)

    Walderhaug, Ståle; Meland, Per Håkon; Mikalsen, Marius; Sagen, Terje; Brevik, John Ivar

    2008-02-01

    Documentation of medical treatment and observation of patients during evacuation from the point of injury to definitive treatment is important both for optimizing patient treatment and managing the evacuation process. The current practice in military medical field documentation uses paper forms and voice communication. There are many shortcomings associated with this approach, especially with respect to information capture and sharing processes. Current research addresses the use of new technology for civilian ambulance-to-hospital communication. The research work presented in this article addresses information capture and sharing in extreme military conditions by evaluating a targeted computerized information system called EvacSys during a military exercise in northern Norway in December 2003. EvacSys was designed and implemented in close cooperation with military medical personnel in both Norway and the USA. The system was evaluated and compared to the traditional paper-based documentation method during a military exercise. The on-site evaluation was conducted in a military medical platoon in the Norwegian Armed Forces, using questionnaires, semi-structured interviews, observation and video recording to capture the users' system acceptance. A prototype software system running on a commercial off-the-shelf hardware platform was successfully developed. The evaluation of this system shows that the usability of digital information capturing and sharing are perceived to be at least as good as the traditional paper-based method. The medics found the new digital method to be more viable than the old one. No technical problems were encountered. Our research shows that it is feasible to utilize digital information systems for medical documentation in extreme outdoor environments. The usability concern is of utmost importance, and more research should be put into the design and alignment with existing workflow. Successful digitalization of information at the point of care

  3. Transcriptomic responses to environmental temperature by turtles with temperature-dependent and genotypic sex determination assessed by RNAseq inform the genetic architecture of embryonic gonadal development.

    Science.gov (United States)

    Radhakrishnan, Srihari; Literman, Robert; Neuwald, Jennifer; Severin, Andrew; Valenzuela, Nicole

    2017-01-01

    Vertebrate sexual fate is decided primarily by the individual's genotype (GSD), by the environmental temperature during development (TSD), or both. Turtles exhibit TSD and GSD, making them ideal to study the evolution of sex determination. Here we analyze temperature-specific gonadal transcriptomes (RNA-sequencing validated by qPCR) of painted turtles (Chrysemys picta TSD) before and during the thermosensitive period, and at equivalent stages in soft-shell turtles (Apalone spinifera-GSD), to test whether TSD's and GSD's transcriptional circuitry is identical but deployed differently between mechanisms. Our data show that most elements of the mammalian urogenital network are active during turtle gonadogenesis, but their transcription is generally more thermoresponsive in TSD than GSD, and concordant with their sex-specific function in mammals [e.g., upregulation of Amh, Ar, Esr1, Fog2, Gata4, Igf1r, Insr, and Lhx9 at male-producing temperature, and of β-catenin, Foxl2, Aromatase (Cyp19a1), Fst, Nf-kb, Crabp2 at female-producing temperature in Chrysemys]. Notably, antagonistic elements in gonadogenesis (e.g., β-catenin and Insr) were thermosensitive only in TSD early-embryos. Cirbp showed warm-temperature upregulation in both turtles disputing its purported key TSD role. Genes that may convert thermal inputs into sex-specific development (e.g., signaling and hormonal pathways, RNA-binding and heat-shock) were differentially regulated. Jak-Stat, Nf-κB, retinoic-acid, Wnt, and Mapk-signaling (not Akt and Ras-signaling) potentially mediate TSD thermosensitivity. Numerous species-specific ncRNAs (including Xist) were differentially-expressed, mostly upregulated at colder temperatures, as were unannotated loci that constitute novel TSD candidates. Cirbp showed warm-temperature upregulation in both turtles. Consistent transcription between turtles and alligator revealed putatively-critical reptilian TSD elements for male (Sf1, Amh, Amhr2) and female (Crabp2 and Hspb1

  4. Pituitary-gonadal and pituitary-thyroid axis hormone concentrations before and during a hypoglycemic clamp after sleep deprivation in healthy men.

    Directory of Open Access Journals (Sweden)

    Kamila Jauch-Chara

    Full Text Available Total sleep deprivation (TSD exerts strong modulatory effects on the secretory activity of endocrine systems that might be related to TSD-induced challenges of cerebral glucose metabolism. Here, we investigate whether TSD affects the course of male pituitary-gonadal and pituitary-thyroid axis related hormones during a subsequent 240-min hypoglycemic clamp. Ten healthy men were tested on 2 different conditions, TSD and 7-hour regular sleep. Circulating concentrations of total testosterone, prolactin (PRL, thyroid stimulating hormone (TSH, free triiodothyronine (fT3, and free thyroxin (fT4 were measured during baseline and a subsequent hypoglycemic clamp taking place in the morning. Basal, i.e. at 07:00 am measured, concentrations of total testosterone (P = 0.05 and PRL (P<0.01 were lower while the values of TSH (P = 0.02, fT3 (P = 0.08, and fT4 (P = 0.04 were higher after TSD as compared to regular sleep. During the subsequent hypoglycemic clamp (all measurements from baseline to the end of the clamp analyzed total testosterone concentrations in the regular sleep (P<0.01 but not in the TSD condition (P = 0.61 decreased, while PRL levels increased (P = 0.05 irrespectively of the experimental condition (P = 0.31. TSH concentrations decreased during hypoglycemia (P<0.01, with this decrease being more pronounced after TSD (P = 0.04. However, at the end of the hypoglycemic clamp concentrations all of the above mentioned hormones did not differ between the two sleep conditions. Our data indicate a profound influence of TSD on male pituitary-gonadal and pituitary-thyroid axis hormones characterized by reduced basal testosterone and PRL levels and increased TSH levels. However, since concentrations of these hormones measured at the end of the 240-min hypoglycemic clamp were not affected by TSD it can be speculated that the influence of TSD on the two endocrine axes is rather short lived or does not interact in an additive

  5. Transcriptomic responses to environmental temperature by turtles with temperature-dependent and genotypic sex determination assessed by RNAseq inform the genetic architecture of embryonic gonadal development.

    Directory of Open Access Journals (Sweden)

    Srihari Radhakrishnan

    Full Text Available Vertebrate sexual fate is decided primarily by the individual's genotype (GSD, by the environmental temperature during development (TSD, or both. Turtles exhibit TSD and GSD, making them ideal to study the evolution of sex determination. Here we analyze temperature-specific gonadal transcriptomes (RNA-sequencing validated by qPCR of painted turtles (Chrysemys picta TSD before and during the thermosensitive period, and at equivalent stages in soft-shell turtles (Apalone spinifera-GSD, to test whether TSD's and GSD's transcriptional circuitry is identical but deployed differently between mechanisms. Our data show that most elements of the mammalian urogenital network are active during turtle gonadogenesis, but their transcription is generally more thermoresponsive in TSD than GSD, and concordant with their sex-specific function in mammals [e.g., upregulation of Amh, Ar, Esr1, Fog2, Gata4, Igf1r, Insr, and Lhx9 at male-producing temperature, and of β-catenin, Foxl2, Aromatase (Cyp19a1, Fst, Nf-kb, Crabp2 at female-producing temperature in Chrysemys]. Notably, antagonistic elements in gonadogenesis (e.g., β-catenin and Insr were thermosensitive only in TSD early-embryos. Cirbp showed warm-temperature upregulation in both turtles disputing its purported key TSD role. Genes that may convert thermal inputs into sex-specific development (e.g., signaling and hormonal pathways, RNA-binding and heat-shock were differentially regulated. Jak-Stat, Nf-κB, retinoic-acid, Wnt, and Mapk-signaling (not Akt and Ras-signaling potentially mediate TSD thermosensitivity. Numerous species-specific ncRNAs (including Xist were differentially-expressed, mostly upregulated at colder temperatures, as were unannotated loci that constitute novel TSD candidates. Cirbp showed warm-temperature upregulation in both turtles. Consistent transcription between turtles and alligator revealed putatively-critical reptilian TSD elements for male (Sf1, Amh, Amhr2 and female (Crabp2 and

  6. Interface control document for tank waste remediation system privatization phase 1 infrastructure support Project W-519

    International Nuclear Information System (INIS)

    Parazin, R.J.

    1998-01-01

    This document describes the functional and physical interfaces between the Tank Waste Remediation System (TWRS) Privatization Phase 1 Infrastructure Project W-519 and the various other projects (i.e., Projects W-314, W-464, W-465, and W-520) supporting Phase 1 that will require the allocation of land in and about the Privatization Phase 1 Site and/or interface with the utilities extended by Project W-519. Project W-519 will identify land use allocations and upgrade/extend several utilities in the 200-East Area into the Privatization Phase 1 Site (formerly the Grout Disposal Compound) in preparation for the Privatization Contractors (PC) to construct treatment facilities. The project will upgrade/extend: Roads, Electrical Power, Raw Water (for process and fire suppression), Potable Water, and Liquid Effluent collection. The replacement of an existing Sanitary Sewage treatment system that may be displaced by Phase 1 site preparation activities may also be included

  7. FEATURES OF TECHNOLOGIES CREATE INTERACTIVE ELECTRONIC DOCUMENT FOR SUPPORT OF LABORATORY PRACTICAL PHYSICS

    Directory of Open Access Journals (Sweden)

    Mykola A. Meleshko

    2014-02-01

    Full Text Available The article discusses the content of the «flash-book» construct, defining its properties and possible components. There are presented some examples of components programming steps of “authoring flash – book”, considered the possibility of using such an electronic document to optimize the learning process at the Technical University in the performance of laboratory training on general physics. The technique of its using to provide individualized approach to learning and the use of various experimental base from classical to digital equipment laboratories is proposed. It was carried out the analysis of ways to improve such interactive electronic document for the development of information technology competence of engineering students.

  8. Watershed Management Optimization Support Tool (WMOST) v3: Theoretical Documentation

    Science.gov (United States)

    The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context, accounting fo...

  9. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Mined Geologic Disposal System Requirements Document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) (including SNF loaded in multi-purpose canisters (MPCs)) and commercial and defense high-level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The purpose of the MGDS-RD is to define the program-level requirements for the design of the Repository, the Exploratory Studies Facility (ESF), and Surface Based Testing Facilities (SBTF). These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MGDS. The document also presents an overall description of the MGDS, its functions (derived using the functional analysis documented by the Physical System Requirements (PSR) documents as a starting point), its segments as described in Section 3.1.3, and the requirements allocated to the segments. In addition, the program-level interfaces of the MGDS are identified. As such, the MGDS-RD provides the technical baseline for the design of the MGDS

  10. A Model of Electronic Document Management System for Limited Partnership

    OpenAIRE

    Faiqunisa, Faiqunisa; Nugroho, Eko; Santosa, Paulus Insap

    2013-01-01

    Both types of documents, electronic and non-electronic are a major component supporting activities. In addition to the documents, communications capabilities to employees and managers effectively with other stakeholders are one of the important key achievements of organizational goals. LP. XYZ is one of the Consultants in the field of Information Technology, but the storage and management of electronic documents and archives themselves carried on a server without a management information sy...

  11. ENHANCED CHARACTERIZATION OF THE REPOSITORY BLOCK REQUIREMENTS DOCUMENT (ECRB-RD)

    International Nuclear Information System (INIS)

    G.M. Teraoka

    1998-01-01

    This Enhanced Characterization of the Repository Block Requirements Document (ECRB-RD) provides applicable design and construction requirements for the Enhanced Characterization of the Repository Block (ECRB) East-West Drift and its associated equipment. This document also identifies the applicable requirements from the Exploratory Studies Facilities Design Requirements (ESFDR) Document (YMPICM-00 19, Revision 2, ICN- 1) for design and construction of the ECRB East-West Drift, ground support, constructor support utilities and components. These requirements have been tailored specifically for the ECRB East-West Drift design and construction. The allocated requirements for the ECRB East-West Drift are in Sections III through VI. The requirements in sections III through VI contain requirement numbers from the ESFDR, Rev 2, ICN-1 for reference back to the ESFDR. Each requirement in the ECRB-RD also identifies a trace to the Site Design and Test Requirements Document (YMP/CM-0021, Rev. 2, ICN-1) and 10CFR60 similar to the style used in the ESFDR. These traces to 10CFR60 are consistent with the 1995 version of 10CFR60 used by the SD and TRD and the ESFDR. Those ESFDR requirements statements that were technically modified are identified as such and those that were derived as part of this allocation are also identified. An activity evaluation has been performed in accordance with QAP-2-0 and has determined that the QA program is applicable to this document. Therefore, the development of this document was performed in compliance with QAP-3-5, Revision 7, Development of Technical Documents and checked and reviewed in compliance with Section 5.3. This is consistent with the IOC from R. Stambaugh to M. Lugo on the subject of ECRB-RD, Revision 1, TDPP Applicability (LV.SEI.,RMS.03/98-0 12, Dated 3/12/98). The ECRB East-West Drift includes those excavated underground openings to support enhanced characterization testing activities for the repository block and provides potential

  12. Smart platform for the time since death determination from vitreous humor cystine.

    Science.gov (United States)

    Ansari, Niha; Lodha, Anand; Menon, Shobhana K

    2016-12-15

    In this work, we report the smart application of AgNPs based sensors for determination of time since death (TSD) via recognition and quantification of vitreous humor (VH) cystine as well as provide the portability for on spot determination of TSD. The lower detection limit was found to be 7.0ng/ml with prominent selectivity. It was found that there is a linear correlation between the VH cystine concentration and TSD as the concentration of cystine increases up to 96h±3.9h. Further for the first time TSD determination is given a smart approach and it proves to have a great utility up to 24h±2.6h. The linear regression equation between TSD (the dependent variable), RGB intensity of cystine concentration till 24h (the independent variable) was found to be TSD=26.69+-0.05*x. The proposed method gives the smart detection, portability, rapidity, sensitivity, selectivity as well as cost effectiveness for determination of time since death. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Improving documentation of a beta-blocker quality measure through an anesthesia information management system and real-time notification of documentation errors.

    Science.gov (United States)

    Nair, Bala G; Peterson, Gene N; Newman, Shu-Fang; Wu, Wei-Ying; Kolios-Morris, Vickie; Schwid, Howard A

    2012-06-01

    Continuation of perioperative beta-blockers for surgical patients who are receiving beta-blockers prior to arrival for surgery is an important quality measure (SCIP-Card-2). For this measure to be considered successful, name, date, and time of the perioperative beta-blocker must be documented. Alternately, if the beta-blocker is not given, the medical reason for not administering must be documented. Before the study was conducted, the institution lacked a highly reliable process to document the date and time of self-administration of beta-blockers prior to hospital admission. Because of this, compliance with the beta-blocker quality measure was poor (-65%). To improve this measure, the anesthesia care team was made responsible for documenting perioperative beta-blockade. Clear documentation guidelines were outlined, and an electronic Anesthesia Information Management System (AIMS) was configured to facilitate complete documentation of the beta-blocker quality measure. In addition, real-time electronic alerts were generated using Smart Anesthesia Messenger (SAM), an internally developed decision-support system, to notify users concerning incomplete beta-blocker documentation. Weekly compliance for perioperative beta-blocker documentation before the study was 65.8 +/- 16.6%, which served as the baseline value. When the anesthesia care team started documenting perioperative beta-blocker in AIMS, compliance was 60.5 +/- 8.6% (p = .677 as compared with baseline). Electronic alerts with SAM improved documentation compliance to 94.6 +/- 3.5% (p documentation and (2) enhance features in the electronic medical systems to alert the user concerning incomplete documentation.

  14. Best Entry Points for Structured Document Retrieval - Part II: Types, Usage and Effectiveness

    DEFF Research Database (Denmark)

    Reid, Jane; Lalmas, Mounia; Finesilver, Karen

    2006-01-01

    Structured document retrieval makes use of document components as the basis of the retrieval process, rather than complete documents. The inherent relationships between these components make it vital to support users' natural browsing behaviour in order to offer effective and efficient access...

  15. Management of technical documents: a projection at the University of Zulia

    Directory of Open Access Journals (Sweden)

    Ana Judith Paredes Chacin

    2015-11-01

    Full Text Available Objective. This paper analyze comprehensively and systematically the principles of organization and technical procedure, which support document management based on the use of information technologies. Method. We developed a study based on the documentary descriptive method in the context of the Dirección de Infraestructura (Dinfra from the Universidad del Zulia. Results. We find evidence of efficiency in the processes that support the management of technical documents: Plans, metrics and memories generated by the Dinfra. Conclusion. The conceptual basis of organizational and technical archives contribute to the systematization, shelter save and documental preservation, and ensure the timely retrieval of technical information for the management of the University of Zulia.

  16. Guide for the realization of Design Base Documents (DBD)

    International Nuclear Information System (INIS)

    Roca Mallofre, G. la

    2010-01-01

    Guide for improving the consistency and quality content of the Design Base Documents. It's a short description of how to carry out and complete these Documents but focusing on those aspects that can be more confusing and harder to interpret. This guide aims to clarify the term Design Base distinguishing between production and safety, and it focuses on safety Design Base Documents and their values and references. It also emphasizes the difference between the support system and the interface system when there is a functional connection between different systems.

  17. Standards for Documenting Finite‐Fault Earthquake Rupture Models

    KAUST Repository

    Mai, Paul Martin

    2016-04-06

    In this article, we propose standards for documenting and disseminating finite‐fault earthquake rupture models, and related data and metadata. A comprehensive documentation of the rupture models, a detailed description of the data processing steps, and facilitating the access to the actual data that went into the earthquake source inversion are required to promote follow‐up research and to ensure interoperability, transparency, and reproducibility of the published slip‐inversion solutions. We suggest a formatting scheme that describes the kinematic rupture process in an unambiguous way to support subsequent research. We also provide guidelines on how to document the data, metadata, and data processing. The proposed standards and formats represent a first step to establishing best practices for comprehensively documenting input and output of finite‐fault earthquake source studies.

  18. Standards for Documenting Finite‐Fault Earthquake Rupture Models

    KAUST Repository

    Mai, Paul Martin; Shearer, Peter; Ampuero, Jean‐Paul; Lay, Thorne

    2016-01-01

    In this article, we propose standards for documenting and disseminating finite‐fault earthquake rupture models, and related data and metadata. A comprehensive documentation of the rupture models, a detailed description of the data processing steps, and facilitating the access to the actual data that went into the earthquake source inversion are required to promote follow‐up research and to ensure interoperability, transparency, and reproducibility of the published slip‐inversion solutions. We suggest a formatting scheme that describes the kinematic rupture process in an unambiguous way to support subsequent research. We also provide guidelines on how to document the data, metadata, and data processing. The proposed standards and formats represent a first step to establishing best practices for comprehensively documenting input and output of finite‐fault earthquake source studies.

  19. The Place of Problem Solving in Contemporary Mathematics Curriculum Documents

    Science.gov (United States)

    Stacey, Kaye

    2005-01-01

    This paper reviews the presentation of problem solving and process aspects of mathematics in curriculum documents from Australia, UK, USA and Singapore. The place of problem solving in the documents is reviewed and contrasted, and illustrative problems from teachers' support materials are used to demonstrate how problem solving is now more often…

  20. Evidence for second-phonon nuclear wobbling

    International Nuclear Information System (INIS)

    Jensen, D.R.; Hagemann, G.B.; Herskind, B.; Sletten, G.; Wilson, J.N.; Hamamoto, I.; Odegaard, S.W.; Spohr, K.; Huebel, H.; Bringel, P.; Neusser, A.; Schoenwasser, G.; Singh, A.K.; Ma, W.C.; Amro, H.; Bracco, A.; Leoni, S.; Benzoni, G.; Maj, A.; Petrache, C.M.

    2002-01-01

    The nucleus 163 Lu has been populated through the reaction 139 La( 29 Si,5n) with a beam energy of 157 MeV. Three triaxial, strongly deformed (TSD) bands have been observed with very similar rotational properties. The first excited TSD band has earlier been assigned as a one-phonon wobbling excitation built on the lowest-lying (yrast) TSD band. The large B(E2) out /B(E2) in value obtainable for one of four observed transitions between the second and first excited TSD bands is in good agreement with particle-rotor calculations for a two-phonon wobbling excitation

  1. Development of the Advanced Energy Design Guide for K-12 Schools -- 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.; Torcellini, P.

    2013-02-01

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-K12) (ASHRAE et al. 2011a). The AEDG-K12 provides recommendations for achieving 50% whole-building energy savings in K-12 schools over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-K12 was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE).

  2. Therapeutic self-disclosure in integrative psychotherapy: When is this a clinical error?

    Science.gov (United States)

    Ziv-Beiman, Sharon; Shahar, Golan

    2016-09-01

    Ascending to prominence in virtually all forms of psychotherapy, therapist self-disclosure (TSD) has recently been identified as a primarily integrative intervention (Ziv-Beiman, 2013). In the present article, we discuss various instances in which using TSD in integrative psychotherapy might constitute a clinical error. First, we briefly review extant theory and empirical research on TSD, followed by our preferred version of integrative psychotherapy (i.e., a version of Wachtel's Cyclical Psychodynamics [Wachtel, 1977, 1997, 2014]), which we title cognitive existential psychodynamics. Next, we provide and discuss three examples in which implementing TSD constitutes a clinical error. In essence, we submit that using TSD constitutes an error when patients, constrained by their representational structures (object relations), experience the subjectivity of the other as impinging, and thus propels them to "react" instead of "emerge." (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  3. Global warming potentials; Part 7 of 7 supporting documents

    International Nuclear Information System (INIS)

    1994-01-01

    This document provides methods to account for the different effects of different gases on the atmosphere. It discusses the rationale and uses for simplified measures to represent human-related effects on climate and provides a brief introduction to a major index, the global warming potential (GWP) index. Appendix 7.A analyzes the science underlying the development of indices for concerns about climate, which is still evolving, evaluates the usefulness of currently available indices, and presents the state of the art for numerical indices and their uncertainties. For concerns about climate, the Intergovernmental Panel on Climate Change (IPCC) has been instrumental in examining relative indices for comparing the radiative influences of greenhouse gases. The IPCC developed the concept of GWPs to provide a simple representation of the relative effects on climate resulting from a unit mass emission of a greenhouse gas. Alternative measures and variations on the definition of GWPs have also been considered and reported

  4. Spontaneous appearance of Tay-Sachs disease in an animal model.

    Science.gov (United States)

    Zeng, B J; Torres, P A; Viner, T C; Wang, Z H; Raghavan, S S; Alroy, J; Pastores, G M; Kolodny, E H

    2008-01-01

    Tay-Sachs disease (TSD) is a progressive neurodegenerative disorder due to an autosomal recessively inherited deficiency of beta-hexosaminidase A (Hex A). Deficiency of Hex A in TSD is caused by a defect of the alpha-subunit resulting from mutations of the HEXA gene. To date, there is no effective treatment for TSD. Animal models of genetic diseases, similar to those known to exist in humans, are valuable and essential research tools for the study of potentially effective therapies. However, there is no ideal animal model of TSD available for use in therapeutic trials. In the present study, we report an animal model (American flamingo; Phoenicopterus ruber) of TSD with Hex A deficiency occurring spontaneously in nature, with accumulation of G(M2)-ganglioside, deficiency of Hex A enzymatic activity, and a homozygous P469L mutation in exon 12 of the hexa gene. In addition, we have isolated the full-length cDNA sequence of the flamingo, which consists of 1581 nucleotides encoding a protein of 527 amino acids. Its coding sequence indicates approximately 71% identity at the nucleotide level and about 72.5% identity at the amino acid level with the encoding region of the human HEXA gene. This animal model, with many of the same features as TSD in humans, could represent a valuable resource for investigating therapy of TSD.

  5. Administration, control and updating of documentation, handbooks and plans, digitization, CAD application

    International Nuclear Information System (INIS)

    Rudolph, K.

    1988-01-01

    The large amount of documents which must be kept up-to-date during the construction and operation of a modern nuclear power plant call for computer supported document management. Possible solutions are discussed and visible trends analyzed. The employment of CAD is demonstrated by means of examples. Experience in the introduction of EDP document management is communicated. 4 figs

  6. Defense transuranic waste program strategy document

    International Nuclear Information System (INIS)

    1982-07-01

    This document summarizes the strategy for managing transuranic (TRU) wastes generated in defense and research activities regulated by the US Department of Energy. It supercedes a document issued in July 1980. In addition to showing how current strategies of the Defense Transuranic Waste Program (DTWP) are consistent with the national objective of isolating radioactive wastes from the biosphere, this document includes information about the activities of the Transuranic Lead Organization (TLO). To explain how the DTWP strategy is implemented, this document also discusses how the TLO coordinates and integrates the six separate elements of the DTWP: (1) Waste Generation Site Activities, (2) Storage Site Activities, (3) Burial Site Activities, (4) Technology Development, (5) Transportation Development, and (6) Permanent Disposal. Storage practices for TRU wastes do not pose short-term hazards to public health and safety or to the environment. Isolation of TRU wastes in a deep-mined geologic repository is considered the most promising of the waste disposal alternatives available. This assessment is supported by the DOE Record of Decision to proceed with research and development work at the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico - a deep-mined geologic research and development project. In support of the WIPP research project and the permanent disposal of TRU waste, the DTWP strategy for the near term will concentrate on completion of procedures and the design and construction of all facilities necessary to certify newly-generated (NG) and stored TRU wastes for emplacement in the WIPP. In addition, the strategy involves evaluating alternatives for disposing of some transuranic wastes by methods which may allow for on-site disposal of these wastes and yet preserve adequate margins of safety to protect public health and the environment

  7. Creation of structured documentation templates using Natural Language Processing techniques.

    Science.gov (United States)

    Kashyap, Vipul; Turchin, Alexander; Morin, Laura; Chang, Frank; Li, Qi; Hongsermeier, Tonya

    2006-01-01

    Structured Clinical Documentation is a fundamental component of the healthcare enterprise, linking both clinical (e.g., electronic health record, clinical decision support) and administrative functions (e.g., evaluation and management coding, billing). One of the challenges in creating good quality documentation templates has been the inability to address specialized clinical disciplines and adapt to local clinical practices. A one-size-fits-all approach leads to poor adoption and inefficiencies in the documentation process. On the other hand, the cost associated with manual generation of documentation templates is significant. Consequently there is a need for at least partial automation of the template generation process. We propose an approach and methodology for the creation of structured documentation templates for diabetes using Natural Language Processing (NLP).

  8. System cost model user's manual, version 1.2

    International Nuclear Information System (INIS)

    Shropshire, D.

    1995-06-01

    The System Cost Model (SCM) was developed by Lockheed Martin Idaho Technologies in Idaho Falls, Idaho and MK-Environmental Services in San Francisco, California to support the Baseline Environmental Management Report sensitivity analysis for the U.S. Department of Energy (DOE). The SCM serves the needs of the entire DOE complex for treatment, storage, and disposal (TSD) of mixed low-level, low-level, and transuranic waste. The model can be used to evaluate total complex costs based on various configuration options or to evaluate site-specific options. The site-specific cost estimates are based on generic assumptions such as waste loads and densities, treatment processing schemes, existing facilities capacities and functions, storage and disposal requirements, schedules, and cost factors. The SCM allows customization of the data for detailed site-specific estimates. There are approximately forty TSD module designs that have been further customized to account for design differences for nonalpha, alpha, remote-handled, and transuranic wastes. The SCM generates cost profiles based on the model default parameters or customized user-defined input and also generates costs for transporting waste from generators to TSD sites

  9. Segregating variation for temperature-dependent sex determination in a lizard.

    Science.gov (United States)

    Rhen, T; Schroeder, A; Sakata, J T; Huang, V; Crews, D

    2011-04-01

    Temperature-dependent sex determination (TSD) was first reported in 1966 in an African lizard. It has since been shown that TSD occurs in some fish, several lizards, tuataras, numerous turtles and all crocodilians. Extreme temperatures can also cause sex reversal in several amphibians and lizards with genotypic sex determination. Research in TSD species indicates that estrogen signaling is important for ovary development and that orthologs of mammalian genes have a function in gonad differentiation. Nevertheless, the mechanism that actually transduces temperature into a biological signal for ovary versus testis development is not known in any species. Classical genetics could be used to identify the loci underlying TSD, but only if there is segregating variation for TSD. Here, we use the 'animal model' to analyze inheritance of sexual phenotype in a 13-generation pedigree of captive leopard geckos, Eublepharis macularius, a TSD reptile. We directly show genetic variance and genotype-by-temperature interactions for sex determination. Additive genetic variation was significant at a temperature that produces a female-biased sex ratio (30°C), but not at a temperature that produces a male-biased sex ratio (32.5°C). Conversely, dominance variance was significant at the male-biased temperature (32.5°C), but not at the female-biased temperature (30°C). Non-genetic maternal effects on sex determination were negligible in comparison with additive genetic variance, dominance variance and the primary effect of temperature. These data show for the first time that there is segregating variation for TSD in a reptile and consequently that a quantitative trait locus analysis would be practicable for identifying the genes underlying TSD.

  10. Functional brain imaging of a complex navigation task following one night of total sleep deprivation

    Science.gov (United States)

    Strangman, Gary; Thompson, John H.; Strauss, Monica M.; Marshburn, Thomas H.; Sutton, Jeffrey P.

    2006-01-01

    Study Objectives: To assess the cerebral effects associated with sleep deprivation in a simulation of a complex, real-world, high-risk task. Design and Interventions: A two-week, repeated measures, cross-over experimental protocol, with counterbalanced orders of normal sleep (NS) and total sleep deprivation (TSD). Setting: Each subject underwent functional magnetic resonance imaging (fMRI) while performing a dual-joystick, 3D sensorimotor navigation task (simulated orbital docking). Scanning was performed twice per subject, once following a night of normal sleep (NS), and once following a single night of total sleep deprivation (TSD). Five runs (eight 24s docking trials each) were performed during each scanning session. Participants: Six healthy, young, right-handed volunteers (2 women; mean age 20) participated. Measurements and Results: Behavioral performance on multiple measures was comparable in the two sleep conditions. Neuroimaging results within sleep conditions revealed similar locations of peak activity for NS and TSD, including left sensorimotor cortex, left precuneus (BA 7), and right visual areas (BA 18/19). However, cerebral activation following TSD was substantially larger and exhibited higher amplitude modulations from baseline. When directly comparing NS and TSD, most regions exhibited TSD>NS activity, including multiple prefrontal cortical areas (BA 8/9,44/45,47), lateral parieto-occipital areas (BA 19/39, 40), superior temporal cortex (BA 22), and bilateral thalamus and amygdala. Only left parietal cortex (BA 7) demonstrated NS>TSD activity. Conclusions: The large network of cerebral differences between the two conditions, even with comparable behavioral performance, suggests the possibility of detecting TSD-induced stress via functional brain imaging techniques on complex tasks before stress-induced failures.

  11. Phenotypic Stability of Energy Balance Responses to Experimental Total Sleep Deprivation and Sleep Restriction in Healthy Adults.

    Science.gov (United States)

    Dennis, Laura E; Spaeth, Andrea M; Goel, Namni

    2016-12-19

    Experimental studies have shown that sleep restriction (SR) and total sleep deprivation (TSD) produce increased caloric intake, greater fat consumption, and increased late-night eating. However, whether individuals show similar energy intake responses to both SR and TSD remains unknown. A total of N = 66 healthy adults (aged 21-50 years, 48.5% women, 72.7% African American) participated in a within-subjects laboratory protocol to compare daily and late-night intake between one night of SR (4 h time in bed, 04:00-08:00) and one night of TSD (0 h time in bed) conditions. We also examined intake responses during subsequent recovery from SR or TSD and investigated gender differences. Caloric and macronutrient intake during the day following SR and TSD were moderately to substantially consistent within individuals (Intraclass Correlation Coefficients: 0.34-0.75). During the late-night period of SR (22:00-04:00) and TSD (22:00-06:00), such consistency was slight to moderate, and participants consumed a greater percentage of calories from protein ( p = 0.01) and saturated fat ( p = 0.02) during SR, despite comparable caloric intake ( p = 0.12). Similarly, participants consumed a greater percentage of calories from saturated fat during the day following SR than TSD ( p = 0.03). Participants also consumed a greater percentage of calories from protein during recovery after TSD ( p sleep loss. This is the first evidence of phenotypic trait-like stability and differential vulnerability of energy balance responses to two commonly experienced types of sleep loss: our findings open the door for biomarker discovery and countermeasure development to predict and mitigate this critical health-related vulnerability.

  12. The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

    Science.gov (United States)

    Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

    2016-09-01

    Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

  13. Providing Total Quality Fundamentals: 1995 Workshops for the NASA Lewis Research Center's Technical Services Directorate

    Science.gov (United States)

    Antczak, Paul; Jacinto,Gilda; Simek, Jimmy

    1997-01-01

    The National Aeronautics and Space Administration's (NASA) agency-wide movement to cultivate a quality workplace is the basis for Lewis Research Center to implement Total Quality Fundamentals (TQF) initiatives. The Lewis Technical Services Directorate (TSD) introduced the Total Quality Fundamentals (TQF) workshops to its work force as an opportunity to introduce the concepts and principles of TQF. These workshops also provided the participants with the opportunity to dialogue with fellow TSD employees and managers. This report describes, through the perspective of the Lewis TSD TQF Coaches, how the TQF work- shop process was accomplished in TSD. It describes the structure for addressing the need, implementation process, input the TSD Coaches provided, common themes and concerns raised, conclusions, and recommendations. The Coaches concluded that these types of workshops could be the key to open the communication channels that are necessary to help everyone at Lewis understand where they fit in the organization. TQF workshops can strengthen the participant's connection with the Mission, Vision of the Center, and Vision of the Agency. Reconunendations are given based on these conclusions that can help the TSD Quality Board develop attainable measures towards a quality workplace.

  14. Documentation, User Support, and Verification of Wind Turbine and Plant Models

    Energy Technology Data Exchange (ETDEWEB)

    Robert Zavadil; Vadim Zheglov; Yuriy Kazachkov; Bo Gong; Juan Sanchez; Jun Li

    2012-09-18

    As part of the Utility Wind Energy Integration Group (UWIG) and EnerNex's Wind Turbine Modeling Project, EnerNex has received ARRA (federal stimulus) funding through the Department of Energy (DOE) to further the progress of wind turbine and wind plant models. Despite the large existing and planned wind generation deployment, industry-standard models for wind generation have not been formally adopted. Models commonly provided for interconnection studies are not adequate for use in general transmission planning studies, where public, non-proprietary, documented and validated models are needed. NERC MOD (North American Electric Reliability Corporation) reliability standards require that power flow and dynamics models be provided, in accordance with regional requirements and procedures. The goal of this project is to accelerate the appropriate use of generic wind turbine models for transmission network analysis by: (1) Defining proposed enhancements to the generic wind turbine model structures that would allow representation of more advanced; (2) Comparative testing of the generic models against more detailed (and sometimes proprietary) versions developed by turbine vendors; (3) Developing recommended parameters for the generic models to best mimic the performance of specific commercial wind turbines; (4) Documenting results of the comparative simulations in an application guide for users; (5) Conducting technology transfer activities in regional workshops for dissemination of knowledge and information gained, and to engage electric power and wind industry personnel in the project while underway; (6) Designing of a "living" homepage to establish an online resource for transmission planners.

  15. Digital Tools for Documenting and Conserving Bahrain's Built Heritage for Posterity

    Science.gov (United States)

    Mezzino, D.; Barazzetti, L.; Santana Quintero, M.; El-Habashi, A.

    2017-08-01

    Documenting the physical characteristics of historic structures is the first step for any preventive maintenance, monitoring, conservation, planning and promotion action. Metric documentation supports informative decision-making process for property owners, site managers, public officials, and conservators. This information serves also a broader purpose, over time, it becomes the primary means by which scholars, heritage professionals, and the general public understand a site that radically changed or disappeared. Further, documentation supports monitoring as well as the character-defining elements analysis, relevant to define the values of the building for the local and international community. The awareness of these concepts oriented the digital documentation and training activities, developed between 2016 and 2017, for the Bahrain Authority for Culture and Antiquities (BACA) in Bahrain. The developed activities had two main aims: a) support the local staff in using specific recording techniques to efficiently document and consequently preserve built heritage sites with appropriate accuracy and in a relatively short period; b) develop a pilot project in collaboration with BACA to validate the capacity of the team to accurately document and produce measured records for the conservation and management of Bahrain built heritage. The documentation project has been developed by a multidisciplinary team of experts from BACA, Carleton Immersive Media Studio (CIMS), Carleton University, Canada and a contracted researcher from the Gicarus Lab, Politecnico di Milano (POLIMI) in Italy. In the training activities, the participants have been exposed to a wide range of recording techniques, illustrating them the selection criteria for the most suitable one, according to requirements, site specifications, categories of values identified for the various built elements, and budget. The pilot project has been tested on three historical structures, both with strong connotations in

  16. Avionics Systems Laboratory/Building 16. Historical Documentation

    Science.gov (United States)

    Slovinac, Patricia; Deming, Joan

    2011-01-01

    As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities that was conducted by NASA s Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, "Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas," prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Avionics Systems Laboratory (Building 16) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 5 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 16 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 16 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 16 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work product on CD, are

  17. Central Waste Complex (CWC) essential/support drawing list

    International Nuclear Information System (INIS)

    WHITLOCK, R.W.

    1999-01-01

    Essential and supporting engineering drawings for the Central Waste Complex (CWC) are identified in this document. The purpose of the document is to describe the criteria used to identify drawings and the plan for updating and maintaining their accuracy. This document supports HNF-PRO-242 and HNF-PRO-440

  18. An Introduction to the Nuclear Document Crawling System

    International Nuclear Information System (INIS)

    Tae, Jae Woong; Yoon, Sung Ho; Shin, Dong Hoon

    2016-01-01

    The NSG(Nuclear Suppliers Group) guidelines state that controls on 'technology' transfer do not apply to information 'in the public domain' or to 'basic scientific research'. According to the guidelines, 'basic scientific research' is an experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena and observable facts, not primarily directed towards a specific practical aim or objective. 'Technology in the public domain' means 'technology' or 'software' that has been made available without restrictions upon its further dissemination. It is a difficult problem to determine whether a document is in the public domain or it is a basic scientific research because its criteria are ambiguous and unclear. In this paper, we introduce an approach using documents on the web and a system to manage electronic documents on the web. In this paper, we proposed an approach to determine whether a document is open to public or it is a basic scientific research and we developed the document crawling system to collect open documents on the web. We can take open documents into a review process in a new way. It supports to prevent reviewers from classifying an open document into a strategic technology. It is expected to improve reliability of classification results

  19. An Introduction to the Nuclear Document Crawling System

    Energy Technology Data Exchange (ETDEWEB)

    Tae, Jae Woong; Yoon, Sung Ho; Shin, Dong Hoon [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2016-05-15

    The NSG(Nuclear Suppliers Group) guidelines state that controls on 'technology' transfer do not apply to information 'in the public domain' or to 'basic scientific research'. According to the guidelines, 'basic scientific research' is an experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena and observable facts, not primarily directed towards a specific practical aim or objective. 'Technology in the public domain' means 'technology' or 'software' that has been made available without restrictions upon its further dissemination. It is a difficult problem to determine whether a document is in the public domain or it is a basic scientific research because its criteria are ambiguous and unclear. In this paper, we introduce an approach using documents on the web and a system to manage electronic documents on the web. In this paper, we proposed an approach to determine whether a document is open to public or it is a basic scientific research and we developed the document crawling system to collect open documents on the web. We can take open documents into a review process in a new way. It supports to prevent reviewers from classifying an open document into a strategic technology. It is expected to improve reliability of classification results.

  20. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    Science.gov (United States)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  1. Supporting document for the historical tank content estimate for S tank farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This document provides historical evaluations of the radioactive mixed wastes stored in the Hanford Site 200 West Area underground single-shell tanks (SSTs). A Historical Tank Content Estimate has been developed by reviewing the process histories, waste transfer data, and available physical and chemical characterization data from various Department of Energy (DOE) and Department of Defense (DOD) contractors. The historical data will supplement information gathered from in-tank core sampling activities that are currently underway. A tank history review that is accompanied by current characterization data creates a complete and reliable inventory estimate. Additionally, historical review of the tanks may reveal anomalies or unusual contents that are critical to characterization and post characterization activities. Complete and accurate tank waste characterizations are critical first steps for DOE and Westinghouse Hanford Company safety programs, waste pretreatment, and waste retrieval activities. The scope of this document is limited to all the SSTs in the S Tank Farm of the southwest quadrant of the 200 West Area. Nine appendices compile data on: tank level histories; temperature graphs; surface level graphs; drywell graphs; riser configuration and tank cross section; sampling data; tank photographs; unknown tank transfers; and tank layering comparison. 113 refs

  2. Supporting document for the historical tank content estimate for A Tank Farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This document provides historical evaluations of the radioactive mixed wastes stored in the Hanford Site 200-East Area underground single-shell tanks (SSTs). A Historical Tank Content Estimate has been developed by reviewing the process histories, waste transfer data, and available physical and chemical characterization data from various Department of Energy (DOE) and Department of Defense (DOD) contractors. The historical data will supplement information gathered from in-tank core sampling activities that are currently underway. A tank history review that is accompanied by current characterization data creates a complete and reliable inventory estimate. Additionally, historical review of the tanks may reveal anomalies or unusual contents that are critical to characterization and post characterization activities. Complete and accurate tank waste characterizations are critical first steps for DOE and Westinghouse Hanford Company safety programs, waste pretreatment, and waste retrieval activities. The scope of this document is limited to the SSTs in the A Tank Farm of the northeast quadrant of the 200 East Area. Nine appendices compile data on: tank level histories; temperature graphs; surface level graphs; drywell graphs; riser configuration and tank cross section; sampling data; tank photographs; unknown tank transfers; and tank layering comparison. 113 refs

  3. Supporting document for the historical tank content estimate for A Tank Farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This document provides historical evaluations of the radioactive mixed wastes stored in the Hanford Site 200-East Area underground single-shell tanks (SSTs). A Historical Tank Content Estimate has been developed by reviewing the process histories, waste transfer data, and available physical and chemical characterization data from various Department of Energy (DOE) and Department of Defense (DOD) contractors. The historical data will supplement information gathered from in-tank core sampling activities that are currently underway. A tank history review that is accompanied by current characterization data creates a complete and reliable inventory estimate. Additionally, historical review of the tanks may reveal anomalies or unusual contents that are critical to characterization and post characterization activities. Complete and accurate tank waste characterizations are critical first steps for DOE and Westinghouse Hanford Company safety programs, waste pretreatment, and waste retrieval activities. The scope of this document is limited to the SSTs in the A Tank Farm of the northeast quadrant of the 200 East Area. Nine appendices compile data on: tank level histories; temperature graphs; surface level graphs; drywell graphs; riser configuration and tank cross section; sampling data; tank photographs; unknown tank transfers; and tank layering comparison. 113 refs.

  4. Supporting document for the historical tank content estimate for S tank farm

    Energy Technology Data Exchange (ETDEWEB)

    Brevick, C.H.; Gaddis, L.A.; Walsh, A.C.

    1994-06-01

    This document provides historical evaluations of the radioactive mixed wastes stored in the Hanford Site 200 West Area underground single-shell tanks (SSTs). A Historical Tank Content Estimate has been developed by reviewing the process histories, waste transfer data, and available physical and chemical characterization data from various Department of Energy (DOE) and Department of Defense (DOD) contractors. The historical data will supplement information gathered from in-tank core sampling activities that are currently underway. A tank history review that is accompanied by current characterization data creates a complete and reliable inventory estimate. Additionally, historical review of the tanks may reveal anomalies or unusual contents that are critical to characterization and post characterization activities. Complete and accurate tank waste characterizations are critical first steps for DOE and Westinghouse Hanford Company safety programs, waste pretreatment, and waste retrieval activities. The scope of this document is limited to all the SSTs in the S Tank Farm of the southwest quadrant of the 200 West Area. Nine appendices compile data on: tank level histories; temperature graphs; surface level graphs; drywell graphs; riser configuration and tank cross section; sampling data; tank photographs; unknown tank transfers; and tank layering comparison. 113 refs.

  5. Supporting document for the historical tank content estimate for B Tank Farm

    International Nuclear Information System (INIS)

    Brevick, C.H.; Gaddis, L.A.; Johnson, E.D.

    1994-06-01

    This document provides historical evaluations of the radioactive mixed wastes stored in the Hanford Site 200-East Area underground single-shell tanks (SSTs). A Historical Tank Content Estimate has been developed by reviewing the process histories, waste transfer data, and available physical and chemical characterization data from various Department of Energy (DOE) and Department of Defense (DOD) contractors. The historical data will supplement information gathered from in-tank core sampling activities that are currently underway. A tank history review that is accompanied by current characterization data creates a complete and reliable inventory estimate. Additionally, historical review of the tanks may reveal anomalies or unusual contents that are critical to characterization and post characterization activities. Complete and accurate tank waste characterizations are critical first steps for DOE and Westinghouse Hanford Company safety programs, waste pretreatment, and waste retrieval activities. The scope of this document is limited to the SSTs in the B Tank Farm of the northeast quadrant of the 200 East Area. Nine appendices compile data on: tank level histories; temperature graphs; surface level graphs; drywell graphs; riser configuration and tank cross section; sampling data; tank photographs; unknown tank transfers; and tank layering comparison. 113 refs

  6. Quantification of the Potential Gross Economic Impacts of Five Methane Reduction Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Curley, Christina [Colorado State Univ., Fort Collins, CO (United States)

    2015-04-23

    Methane (CH4) is a potent greenhouse gas that is released from the natural gas supply chain into the atmosphere as a result of fugitive emissions1 and venting2 . We assess five potential CH4 reduction scenarios from transmission, storage, and distribution (TS&D) using published literature on the costs and the estimated quantity of CH4 reduced. We utilize cost and methane inventory data from ICF (2014) and Warner et al. (forthcoming) as well as data from Barrett and McCulloch (2014) and the American Gas Association (AGA) (2013) to estimate that the implementation of these measures could support approximately 85,000 jobs annually from 2015 to 2019 and reduce CH4 emissions from natural gas TS&D by over 40%. Based on standard input/output analysis methodology, measures are estimated to support over $8 billion in GDP annually over the same time period and allow producers to recover approximately $912 million annually in captured gas.

  7. ACOG committee opinion. Number 318, October 2005. Screening for Tay-Sachs disease.

    Science.gov (United States)

    2005-10-01

    Tay-Sachs disease (TSD) is a severe progressive neurologic disease that causes death in early childhood. Carrier screening, should be offered before pregnancy to individuals and couples at high-risk, including those of Ashkenazi Jewish, French-Canadian, or Cajun descent and those with a family history consistent with TSD. If both partners are determined to be carriers of TSD, genetic counseling and prenatal diagnosis should be offered.

  8. Dusting Off the Shelves: Getting the Most Value Out of Vocational Education and Training Equity Resources. Support Document

    Science.gov (United States)

    Mawer, Giselle; Jackson, Elaine

    2006-01-01

    This document accompanies the report, "Dusting Off the Shelves: Getting The Most Value Out of Vocational Education and Training Equity Resources." Included in this document are: (1) Consultations; and (2) Questionnaires. [This document was produced with funding provided through the Department of Education, Science and Training. For "Dusting Off…

  9. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P. M.

    2001-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6)

  10. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P.

    2000-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M and O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6)

  11. Model documentation report: Short-Term Hydroelectric Generation Model

    International Nuclear Information System (INIS)

    1993-08-01

    The purpose of this report is to define the objectives of the Short- Term Hydroelectric Generation Model (STHGM), describe its basic approach, and to provide details on the model structure. This report is intended as a reference document for model analysts, users, and the general public. Documentation of the model is in accordance with the Energy Information Administration's (AYE) legal obligation to provide adequate documentation in support of its models (Public Law 94-385, Section 57.b.2). The STHGM performs a short-term (18 to 27- month) forecast of hydroelectric generation in the United States using an autoregressive integrated moving average (UREMIA) time series model with precipitation as an explanatory variable. The model results are used as input for the short-term Energy Outlook

  12. Essays on Public Documents and Government Policies (3).

    Science.gov (United States)

    Morehead, Joe

    1986-01-01

    Eight essays on government documents examine a variety of subjects--the publication "Policy and Supporting Positions," Supreme Court and separation of powers rulings, private legislation, environmental information, publications of the Department of Education, physical fitness, and national cemeteries. (EM)

  13. [Efficiency of computer-based documentation in long-term care--preliminary project].

    Science.gov (United States)

    Lüngen, Markus; Gerber, Andreas; Rupprecht, Christoph; Lauterbach, Karl W

    2008-06-01

    In Germany the documentation of processes in long-term care is mainly paper-based. Planning, realization and evaluation are not supported in an optimal way. In a preliminary study we evaluated the consequences of the introduction of a computer-based documentation system using handheld devices. We interviewed 16 persons before and after introducing the computer-based documentation and assessed costs for the documentation process and administration. The results show that reducing costs is likely. The job satisfaction of the personnel increased, more time could be spent for caring for the residents. We suggest further research to reach conclusive results.

  14. Cold Vacuum Drying facility design basis accident analysis documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.

    2000-01-01

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report (FSAR), ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR. The calculations in this document address the design basis accidents (DBAs) selected for analysis in HNF-3553, ''Spent Nuclear Fuel Project Final Safety Analysis Report'', Annex B, ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' The objective is to determine the quantity of radioactive particulate available for release at any point during processing at the Cold Vacuum Drying Facility (CVDF) and to use that quantity to determine the amount of radioactive material released during the DBAs. The radioactive material released is used to determine dose consequences to receptors at four locations, and the dose consequences are compared with the appropriate evaluation guidelines and release limits to ascertain the need for preventive and mitigative controls

  15. Cold Vacuum Drying facility design basis accident analysis documentation

    Energy Technology Data Exchange (ETDEWEB)

    CROWE, R.D.

    2000-08-08

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report (FSAR), ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR. The calculations in this document address the design basis accidents (DBAs) selected for analysis in HNF-3553, ''Spent Nuclear Fuel Project Final Safety Analysis Report'', Annex B, ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' The objective is to determine the quantity of radioactive particulate available for release at any point during processing at the Cold Vacuum Drying Facility (CVDF) and to use that quantity to determine the amount of radioactive material released during the DBAs. The radioactive material released is used to determine dose consequences to receptors at four locations, and the dose consequences are compared with the appropriate evaluation guidelines and release limits to ascertain the need for preventive and mitigative controls.

  16. Hanford facility dangerous waste permit application

    International Nuclear Information System (INIS)

    1991-01-01

    This document, Set 2, the Hanford Facility Dangerous Waste Part B Permit Application, consists of 15 chapters that address the content of the Part B checklists prepared by the Washington State Department of Ecology (Ecology 1987) and the US Environmental Protection Agency (40 CFR 270), with additional information requirements mandated by the Hazardous and Solid Waste Amendments of 1984 and revisions of WAC 173-303. For ease of reference, the Washington State Department of Ecology checklist section numbers, in brackets, follow the chapter headings and subheadings. This permit application contains ''umbrella- type'' documentation with overall application to the Hanford Facility. This documentation is broad in nature and applies to all TSD units that have final status under the Hanford Facility Permit

  17. Phenotypic Stability of Energy Balance Responses to Experimental Total Sleep Deprivation and Sleep Restriction in Healthy Adults

    Directory of Open Access Journals (Sweden)

    Laura E. Dennis

    2016-12-01

    Full Text Available Experimental studies have shown that sleep restriction (SR and total sleep deprivation (TSD produce increased caloric intake, greater fat consumption, and increased late-night eating. However, whether individuals show similar energy intake responses to both SR and TSD remains unknown. A total of N = 66 healthy adults (aged 21–50 years, 48.5% women, 72.7% African American participated in a within-subjects laboratory protocol to compare daily and late-night intake between one night of SR (4 h time in bed, 04:00–08:00 and one night of TSD (0 h time in bed conditions. We also examined intake responses during subsequent recovery from SR or TSD and investigated gender differences. Caloric and macronutrient intake during the day following SR and TSD were moderately to substantially consistent within individuals (Intraclass Correlation Coefficients: 0.34–0.75. During the late-night period of SR (22:00–04:00 and TSD (22:00–06:00, such consistency was slight to moderate, and participants consumed a greater percentage of calories from protein (p = 0.01 and saturated fat (p = 0.02 during SR, despite comparable caloric intake (p = 0.12. Similarly, participants consumed a greater percentage of calories from saturated fat during the day following SR than TSD (p = 0.03. Participants also consumed a greater percentage of calories from protein during recovery after TSD (p < 0.001. Caloric intake was greater in men during late-night hours and the day following sleep loss. This is the first evidence of phenotypic trait-like stability and differential vulnerability of energy balance responses to two commonly experienced types of sleep loss: our findings open the door for biomarker discovery and countermeasure development to predict and mitigate this critical health-related vulnerability.

  18. EIA model documentation: Electricity market module - electricity fuel dispatch

    International Nuclear Information System (INIS)

    1997-01-01

    This report documents the National Energy Modeling System Electricity Fuel Dispatch Submodule (EFD), a submodule of the Electricity Market Module (EMM) as it was used for EIA's Annual Energy Outlook 1997. It replaces previous documentation dated March 1994 and subsequent yearly update revisions. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. This document serves four purposes. First, it is a reference document providing a detailed description of the model for reviewers and potential users of the EFD including energy experts at the Energy Information Administration (EIA), other Federal agencies, state energy agencies, private firms such as utilities and consulting firms, and non-profit groups such as consumer and environmental groups. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports. Third, it facilitates continuity in model development by providing documentation which details model enhancements that were undertaken for AE097 and since the previous documentation. Last, because the major use of the EFD is to develop forecasts, this documentation explains the calculations, major inputs and assumptions which were used to generate the AE097

  19. EIA model documentation: Electricity market module - electricity fuel dispatch

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the National Energy Modeling System Electricity Fuel Dispatch Submodule (EFD), a submodule of the Electricity Market Module (EMM) as it was used for EIA`s Annual Energy Outlook 1997. It replaces previous documentation dated March 1994 and subsequent yearly update revisions. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. This document serves four purposes. First, it is a reference document providing a detailed description of the model for reviewers and potential users of the EFD including energy experts at the Energy Information Administration (EIA), other Federal agencies, state energy agencies, private firms such as utilities and consulting firms, and non-profit groups such as consumer and environmental groups. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports. Third, it facilitates continuity in model development by providing documentation which details model enhancements that were undertaken for AE097 and since the previous documentation. Last, because the major use of the EFD is to develop forecasts, this documentation explains the calculations, major inputs and assumptions which were used to generate the AE097.

  20. Hanford surplus facilities hazards identification document. Revision 2

    International Nuclear Information System (INIS)

    Egge, R.G.

    1996-02-01

    This document provides general safety information needed by personnel who enter and work in surplus facilities managed by Bechtel Hanford, Inc. (BHI). The purpose of the document is to enhance access control of surplus facilities, educate personnel on the potential hazards associated with these facilities prior to entry, and ensure that safety precautions are taken while in the facility. Questions concerning the currency of this information should be directed to the building administrator (as listed in BHI-FS-01, Field Support Administration, Section 1.1, ''Access Control for ERC Surplus Facilities'')

  1. Biomass Assessment. Assessment of global biomass potentials and their links to food, water, biodiversity, energy demand and economy. Inventory and analysis of existing studies. Supporting document

    International Nuclear Information System (INIS)

    Dornburg, V.; Faaij, A.; Verweij, P.; Banse, M.; Van Diepen, K.; Van Keulen, H.; Langeveld, H.; Meeusen, M.; Van de Ven, G.; Wester, F.; Alkemade, R.; Ten Brink, B.; Van den Born, G.J.; Van Oorschot, M.; Ros, J.; Smout, F.; Van Vuuren, D.; Van den Wijngaart, R.; Aiking, H.; Londo, M.; Mozaffarian, H.; Smekens, K.; Lysen, E.

    2008-01-01

    This supporting document contains the result from the inventory phase of the biomass assessment of global biomass potentials and their links to food, water, biodiversity, energy demand and economy. This study provides a comprehensive assessment of global biomass potential estimates, focusing on the various factors affecting these potentials, such as food supplies, water use, biodiversity, energy demands and agro-economics

  2. Population and harvest trends of big game and small game species: a technical document supporting the USDA Forest Service Interim Update of the 2000 RPA Assessment

    Science.gov (United States)

    Curtis H. Flather; Michael S. Knowles; Stephen J. Brady

    2009-01-01

    This technical document supports the Forest Service's requirement to assess the status of renewable natural resources as mandated by the Forest and Rangeland Renewable Resources Planning Act of 1974 (RPA). It updates past reports on national and regional trends in population and harvest estimates for species classified as big game and small game. The trends...

  3. TECHNICAL BASIS DOCUMENT FOR NATURAL EVENT HAZARDS

    International Nuclear Information System (INIS)

    KRIPPS, L.J.

    2006-01-01

    This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for natural event hazard (NEH)-initiated accidents. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls

  4. Technical basis document for natural event hazards

    International Nuclear Information System (INIS)

    CARSON, D.M.

    2003-01-01

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for natural event hazards (NEH)-initiated representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report

  5. Guidance document for revision of DOE Order 5820.2A, Radioactive Waste Technical Support Program. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kudera, D.E.; McMurtrey, C.D.; Meagher, B.G.

    1993-04-01

    This document provides guidance for the revision of DOE Order 5820.2A, ``Radioactive Waste Management.`` Technical Working Groups have been established and are responsible for writing the revised order. The Technical Working Groups will use this document as a reference for polices and procedures that have been established for the revision process. The overall intent of this guidance is to outline how the order will be revised and how the revision process will be managed. In addition, this document outlines technical issues considered for inclusion by a Department of Energy Steering Committee.

  6. Hanford Waste Vitrification Plant technical background document for toxics best available control technology demonstration

    International Nuclear Information System (INIS)

    1992-10-01

    This document provides information on toxic air pollutant emissions to support the Notice of Construction for the proposed Hanford Waste Vitrification Plant (HWVP) to be built at the the Department of Energy Hanford Site near Richland, Washington. Because approval must be received prior to initiating construction of the facility, state and federal Clean Air Act Notices of construction are being prepared along with necessary support documentation

  7. Hanford Waste Vitrification Plant technical background document for toxics best available control technology demonstration

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-10-01

    This document provides information on toxic air pollutant emissions to support the Notice of Construction for the proposed Hanford Waste Vitrification Plant (HWVP) to be built at the the Department of Energy Hanford Site near Richland, Washington. Because approval must be received prior to initiating construction of the facility, state and federal Clean Air Act Notices of construction are being prepared along with necessary support documentation.

  8. Molecular imaging of enhanced Na + expression in the liver of total sleep deprived rats by TOF-SIMS

    Science.gov (United States)

    Chang, Hung-Ming; Chen, Bo-Jung; Wu, Un-In; Huang, Yi-Lun; Mai, Fu-Der

    2008-12-01

    Sleep disorder is associated with metabolic disturbances, which was related to oxidative stress and subsequently sodium overload. Since liver plays important roles in metabolic regulation, present study is aimed to determine whether hepatic sodium, together with oxidative stress, would significantly alter after total sleep deprivation (TSD). Sodium ion was investigated by time-of-flight secondary ion mass spectrometry (TOF-SIMS). Parameter for oxidative stress was examined by heat shock protein-25 (HSP-25) immunohistochemistry. TOF-SIMS spectrum indicated that hepatic Na +/K + ratio counting as 82.41 ± 9.5 was obtained in normal rats. Sodium ions were distributed in hepatocytes with several aggregations. However, following TSD, the intensity for Na +/K + ratio was relatively increased (101.94 ± 6.9) and signals for sodium image were strongly expressed throughout hepatocytes without spatial localization. Quantitative analysis revealed that HSP-25 staining intensity is 1.78 ± 0.27 in TSD rats, which was significantly higher than that of normal ones (0.68 ± 0.15). HSP-25 augmentation suggests that hepatocytes suffer from oxidative stress following TSD. Concerning oxidative stress induced sodium overload would impair metabolic function; enhanced hepatic sodium expression after TSD may be a major cause of TSD relevant metabolic diseases.

  9. Determinations of TSD facility acceptability under the CERCLA Off-Site Rule

    International Nuclear Information System (INIS)

    1997-06-01

    On September 22, 1993, the US Environmental Protection Agency (EPA) published the ''Off-Site Rule'' to implement section 121(d)(3) of the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). CERCLA section 121(d)(3) requires that wastes generated as a result of remediation activities taken under CERCLA authority and transferred off-site be managed only at facilities that comply with the Resource Conservation and Recovery Act. In 1994, the DOE's Office of Environmental Policy and Assistance (OEPA), RCRA/CERCLA Division (EH-413) published a CERCLA Information Brief titled ''The Off-Site Rule'' which describes the content of the Off-Site Rule and clarifies some of its implications for DOE remedial actions under CERCLA. Additionally, EH-413 published the Guide on Selecting Compliant Off-Site Hazardous Waste Treatment, Storage and Disposal Facilities which provides a regulatory roadmap for accomplishing off-site transfers of environmental restoration and process hazardous waste at DOE facilities in a manner compliant with the Off-Site Rule and other relevant Federal regulations. Those guidance documents concentrate primarily on DOE's perspective as a hazardous waste generator. The purpose of this Information Brief is to address the implications of the Off-Site Rule for DOE-owned hazardous waste treatment, storage or disposal facilities that accept CERCLA remediation wastes from off-site locations

  10. DIGITAL TOOLS FOR DOCUMENTING AND CONSERVING BAHRAIN’S BUILT HERITAGE FOR POSTERITY

    Directory of Open Access Journals (Sweden)

    D. Mezzino

    2017-08-01

    Full Text Available Documenting the physical characteristics of historic structures is the first step for any preventive maintenance, monitoring, conservation, planning and promotion action. Metric documentation supports informative decision-making process for property owners, site managers, public officials, and conservators. This information serves also a broader purpose, over time, it becomes the primary means by which scholars, heritage professionals, and the general public understand a site that radically changed or disappeared. Further, documentation supports monitoring as well as the character-defining elements analysis, relevant to define the values of the building for the local and international community. The awareness of these concepts oriented the digital documentation and training activities, developed between 2016 and 2017, for the Bahrain Authority for Culture and Antiquities (BACA in Bahrain. The developed activities had two main aims: a support the local staff in using specific recording techniques to efficiently document and consequently preserve built heritage sites with appropriate accuracy and in a relatively short period; b develop a pilot project in collaboration with BACA to validate the capacity of the team to accurately document and produce measured records for the conservation and management of Bahrain built heritage. The documentation project has been developed by a multidisciplinary team of experts from BACA, Carleton Immersive Media Studio (CIMS, Carleton University, Canada and a contracted researcher from the Gicarus Lab, Politecnico di Milano (POLIMI in Italy. In the training activities, the participants have been exposed to a wide range of recording techniques, illustrating them the selection criteria for the most suitable one, according to requirements, site specifications, categories of values identified for the various built elements, and budget. The pilot project has been tested on three historical structures, both with strong

  11. Odontometric evaluation of mandibular premolars with tooth shape deviation: a case-control study.

    Science.gov (United States)

    Chate, Robert Anthony Clive

    2012-09-01

    To evaluate the mean dimensions and morphologic characteristics of mandibular premolars that had mesiodistally elongated and faciolingually squeezed tooth shape deviations (MnP-TSD) and determine the population prevalence of this anomaly. Clinical photographs and study models were made for all new patients with MnP-TSD teeth who were seen over 20 years. The mesiodistal (MD) and faciolingual (FL) dimensions of the anomalous premolars were measured. MD/FL indices and MD × FL mm(2) occlusal crown areas were calculated and means and standard deviations were derived. Male and female means from the mandibular first and second anomalous premolars (MnP1/MnP2-TSD) were statistically compared against gender-specific means derived from published normative data using Student's t-tests and chi-square tests. Fifty-six individuals (33 male and 23 female) with MnP-TSD were identified, giving a male to female ratio of 1.4:1, while the prevalence rate in the indigenous British population was estimated to be 0.6%. The MD widths of the MnP1-TSD and MnP2-TSD teeth were approximately 1 mm wider than normal, while the FL diameters were about 0.5 mm and 1.5 mm narrower respectively, for the first and second premolar teeth. The MD/FL indices, instead of being under 90 as usual were above 100, while the mean MD/FL mm(2) crown surface areas were normal. This study supplies odontometric dimensional and morphologic data on MnP-TSD teeth that provide a reference source for future comparisons.

  12. Design document for landfill capping Prototype Decision Support System

    International Nuclear Information System (INIS)

    Stone, J.J.; Paige, G.; Hakonson, T.E.; Lane, L.J.

    1994-01-01

    The overall objective of the Prototype Decision Support System for shallow land burial project is to ''Develop a Decision Support System tool which incorporates simulation modeling and multi-objective decision theory for the purpose of designing and evaluating alternative trench cap designs for mixed waste landfill covers. The goal is to improve the quality of technical information used by the risk manager to select landfill cover designs while taking into account technological, economical, and regulatory factors.'' The complexity of the technical and non-technical information, and how the information varies in importance across sites, points to the need for decision analysis tools that provide a common basis for integrating, synthesizing, and valuing the decision input. Because the cost of remediating thousands of contaminated DOE sites is projected to be in the 10's--100's of billions of dollars, methods will be needed to establish cleanup priorities and to help in the selection and evaluation of cost effective remediation alternatives. Even at this early stage in DOE's cleanup program, it is certain that capping technologies will be heavily relied upon to remediate the 3000+ landfills on DOE property. Capping is favored in remediating most DOE landfills because, based on preliminary baseline risk assessments, human and ecological risks are considered to be low at most of these sites and the regulatory requirements for final closure of old landfills can be met using a well designed cap to isolate the buried waste. This report describes a program plan to design, develop, and test a decision support system (DSS) for assisting the DOE risk manager in evaluating capping alternatives for radioactive and hazardous waste landfills. The DOE DSS will incorporate methods for calculating, integrating and valuing technical, regulatory, and economic criteria

  13. The significance of radiological control documentation in litigation

    International Nuclear Information System (INIS)

    Lodde, G.M.; Murphy, T.D.

    1988-01-01

    Commercial nuclear facilities accumulate radiological control program data and documents generated and retained pursuant to regulatory, license, and technical specification requirements. During and following the Three Mile Island Unit 2 (TMI-2) accident, many documents were produced that would not normally have been produced. Shortly after the accident, the US Nuclear Regulatory Commission (NRC) issued an order requiring the retention of all data, including documentary material and physical samples relating to the TMI-2 accident (44 Fed. Reg. 30788, May 29, 1979). Three years later, the NRC vacated the requirement to retain catalogued physical samples, provided the radioactivity data had been properly recorded, allowing disposal of many samples. After the TMI-2 accident, GPU Nuclear Corporation (GPU) designed and implemented an effective and efficient record management program for TMI. This Computer-Assisted Records and Information Retrieval System (CARIRS) was developed to assess the official record for TMI, which is maintained as a microform. GPU also retains hard copies of selected radiological control documents for potential litigation. This paper describes the use of radiological control documentation in the postaccident litigation and the magnitude of document production required to support that litigation

  14. INTERVIEW: Quick, Social and Collaborative - wiki-based user documentation at APC by Schneider Electric

    DEFF Research Database (Denmark)

    Møller, Margrethe H.; Pernille Bagger Nielsen, Pernille; Kalianov, Stanislav

    2013-01-01

    In the software documentation department at APC by Schneider Electric in Kolding, Denmark, Technical Writer Pernille Bagger Nielsen writes user documentation for the software developed by the company. In cooperation with Localization Manager Stanislav Kalianov she reorganised the user documentation...... for publication as wiki-based documentation on the internet. The new platform supports their strategy of using agile and iterative, topic-based, collaborative writing when developing user documentation. Their experience will interest readers who consider introducing a similar new strategy....

  15. Registered nurses' decision-making regarding documentation in patients' progress notes.

    Science.gov (United States)

    Tower, Marion; Chaboyer, Wendy; Green, Quentine; Dyer, Kirsten; Wallis, Marianne

    2012-10-01

    To examine registered nurses' decision-making when documenting care in patients' progress notes. What constitutes effective nursing documentation is supported by available guidelines. However, ineffective documentation continues to be cited as a major cause of adverse events for patients. Decision-making in clinical practice is a complex process. To make an effective decision, the decision-maker must be situationally aware. The concept of situation awareness and its implications for making safe decisions has been examined extensively in air safety and more recently is being applied to health. The study was situated in a naturalistic paradigm. Purposive sampling was used to recruit 17 registered nurses who used think-aloud research methods when making decisions about documenting information in patients' progress notes. Follow-up interviews were conducted to validate interpretations. Data were analysed systematically for evidence of cues that demonstrated situation awareness as nurses made decisions about documentation. Three distinct decision-making scenarios were illuminated from the analysis: the newly admitted patient, the patient whose condition was as expected and the discharging patient. Nurses used mental models for decision-making in documenting in progress notes, and the cues nurses used to direct their assessment of patients' needs demonstrated situation awareness at different levels. Nurses demonstrate situation awareness at different levels in their decision-making processes. While situation awareness is important, it is also important to use an appropriate decision-making framework. Cognitive continuum theory is suggested as a decision-making model that could support situation awareness when nurses made decisions about documenting patient care. Because nurses are key decision-makers, it is imperative that effective decisions are made that translate into safe clinical care. Including situation awareness training, combined with employing cognitive

  16. Building America Best Practices Series Volume 8: Builders Challenge Quality Criteria Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Bartlett, Rosemarie; Gilbride, Theresa L.

    2010-11-01

    The U.S. Department of Energy (DOE) has posed a challenge to the homebuilding industry—to build 220,000 high-performance homes by 2012. Through the Builders Challenge, participating homebuilders will have an easy way to differentiate their best energy-performing homes from other products in the marketplace, and to make the benefits clear to buyers. This document was prepared by Pacific Northwest National Laboratory for DOE to provide guidance to U.S. home builders who want to accept the challenge. To qualify for the Builders Challenge, a home must score 70 or less on the EnergySmart Home Scale (E-Scale). The E-scale is based on the well-established Home Energy Rating System (HERS) index, developed by the Residential Energy Services Network (RESNET). The E-scale allows homebuyers to understand – at a glance – how the energy performance of a particular home compares with the performance of others. To learn more about the index and HERS Raters, visit www.natresnet.org. Homes also must meet the Builders Challenge criteria described in this document. To help builders meet the Challenge, guidance is provided in this report for each of the 29 criteria. Included with guidance for each criteria are resources for more information and references for relevant codes and standards. The Builders Challenge Quality Criteria were originally published in Dec. 2008. They were revised and published as PNNL-18009 Rev 1.2 in Nov. 2009. This is version 1.3, published Nov 2010. Changes from the Nov 2009 version include adding a title page and updating the Energy Star windows critiera to the Version 5.0 criteria approved April 2009 and effective January 4, 2010. This document and other information about the Builders Challenge is available on line at www.buildingamerica.gov/challenge.

  17. Environmental Restoration Contractor Resource Conservation and Recovery Act Permit Implementation Plan

    International Nuclear Information System (INIS)

    Lewis, R.A.

    1996-05-01

    This document contains the revised Environmental Restoration Contractor (ERC) Implementation Plan for compliance with the Dangerous Waste and Hazardous and Solid Waste Amendment portions of the Resource Conservation and Recovery Act (RCRA) Permit for the Treatment, Storage, and Disposal of Dangerous Waste (hereafter referred to as the open-quotes Permitclose quotes). The Permit became effective on September 28, 1994. The ERC has developed the Permit Implementation Plan to ensure that the Permit is properly implemented within the ERC project and functions. The plan contains a list of applicable permit conditions, descriptions, responsible organizations, and the status of compliance. The ERC's responsibilities for Permit implementation are identified within both project and functional organizations. Project Managers are responsible for complying with conditions specific to a particular treatment, storage, or disposal (TSD) unit. TSD-specific compliance in include items such as closure plan deliverables, reporting and record keeping requirements, or compliance with non-unit-specific tasks such as spill reporting and emergency response. Functional organizations are responsible for sitewide activities, such as coordinating Permit modifications and developing personnel training programs

  18. Generation of HEXA-deficient hiPSCs from fibroblasts of a Tay-Sachs disease patient

    Directory of Open Access Journals (Sweden)

    Zhong Liu

    2016-09-01

    Full Text Available Human iPSC line TSD-01-hiPSC was generated from fibroblasts of a patient with infantile Tay-Sachs disease (TSD. The patient is compound heterozygous at the HEXA gene by carrying a 1278insTATC allele and an IVS12+1G>C allele. STEMCCA lentivirus, which expresses OCT4, SOX2, KLF4, and c-MYC from a polycistronic transcript, were used for reprogramming. TSD-01-hiPSC express pluripotency markers such as OCT4, SOX2, NANOG, Tra-1-60, and alkaline phosphatase, and can differentiate into tissues from all the three embryonic germ layers. This TSD patient-derived hiPSC line may serve as a valuable in vitro tool for disease modeling and drug test.

  19. Upgrading safety documentation for exported nuclear power plants

    International Nuclear Information System (INIS)

    Rosen, M.

    1978-01-01

    In view of the generally small regulatory staffs of importing countries, suggestions are given for upgrading the ''export edition'' of the traditionally supplied safety documentation by use of a Supplementary Information Report, written specifically for the needs of a smaller and/or less technically qualified staff, which would highlight the differences that exist between the facility to be constructed and the supposedly similar reference plant of the supplier country; by improvement of supporting safety documentation to allow for adequate understanding of significant safety parameters; and by attention to the needs of smaller countries in the critical operating regulations (Technical Specifications for Operation). (author)

  20. Process of technical document quality assessment | Djebabra ...

    African Journals Online (AJOL)

    The most used instrument in training and scientific research is obviously the book which occupies since always a place of choice. Indeed, the book and more particularly the technical book are is used as a support, as well in the basic training as in the document is of good quality in order to have confidence in the services ...

  1. The management of online resources and long-term saving of electronic documents by transfer into the digital space

    Directory of Open Access Journals (Sweden)

    Marius Daniel MAREŞ

    2011-12-01

    The electronic archive refers to the electronic storage system, along with the totality of electronic-type stored documents, while using as storage support any environment that can support storing and from which an electronic document can be presented.

  2. FTC advertising substantiation program. Household products manufacturers. Documentation of Toshiba America, Inc

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The report contains documentation in support of claims that the Toshiba Microwave Oven can cook any and all types of food satisfactorily with a 75% savings in energy usage and cost, regardless of the size of a household. (Portions of this document are not fully legible) (Color illustrations reproduced in black and white)

  3. Analysis and classification of oncology activities on the way to workflow based single source documentation in clinical information systems.

    Science.gov (United States)

    Wagner, Stefan; Beckmann, Matthias W; Wullich, Bernd; Seggewies, Christof; Ries, Markus; Bürkle, Thomas; Prokosch, Hans-Ulrich

    2015-12-22

    Today, cancer documentation is still a tedious task involving many different information systems even within a single institution and it is rarely supported by appropriate documentation workflows. In a comprehensive 14 step analysis we compiled diagnostic and therapeutic pathways for 13 cancer entities using a mixed approach of document analysis, workflow analysis, expert interviews, workflow modelling and feedback loops. These pathways were stepwise classified and categorized to create a final set of grouped pathways and workflows including electronic documentation forms. A total of 73 workflows for the 13 entities based on 82 paper documentation forms additionally to computer based documentation systems were compiled in a 724 page document comprising 130 figures, 94 tables and 23 tumour classifications as well as 12 follow-up tables. Stepwise classification made it possible to derive grouped diagnostic and therapeutic pathways for the three major classes - solid entities with surgical therapy - solid entities with surgical and additional therapeutic activities and - non-solid entities. For these classes it was possible to deduct common documentation workflows to support workflow-guided single-source documentation. Clinical documentation activities within a Comprehensive Cancer Center can likely be realized in a set of three documentation workflows with conditional branching in a modern workflow supporting clinical information system.

  4. Three novel mutations in Iranian patients with Tay-Sachs disease.

    Science.gov (United States)

    Jamali, Solmaz; Eskandari, Nasim; Aryani, Omid; Salehpour, Shadab; Zaman, Talieh; Kamalidehghan, Behnam; Houshmand, Massoud

    2014-01-01

    Tay-Sachs disease (TSD), or GM2 gangliosidosis, is a lethal autosomal recessive neurodegenerative disorder, which is caused by a deficiency of beta-hexosaminidase A (HEXA), resulting in lysosomal accumulation of GM2 ganglioside. The aim of this study was to identify the TSD-causing mutations in an Iranian population. In this study, we examined 31 patients for TSD-causing mutations using PCR, followed by restriction enzyme digestion. Molecular genetics analysis of DNA from 23 patients of TSD revealed mutations that has been previously reported, including four-base duplications c.1274_1277dupTATC in exon 11 and IVS2+1G>A, deletion TTAGGCAAGGGC in exon 10 as well as a few novel mutations, including C331G, which altered Gln>Glu in HEXB, A>G, T>C, and p.R510X in exon 14, which predicted a termination codon or nonsense mutation. In conclusion, with the discovery of these novel mutations, the genotypic spectrum of Iranian patients with TSD disease has been extended and could facilitate definition of disease-related mutations.

  5. Computerising documentation

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The nuclear power generation industry is faced with public concern and government pressures over safety, efficiency and risk. Operators throughout the industry are addressing these issues with the aid of a new technology - technical document management systems (TDMS). Used for strategic and tactical advantage, the systems enable users to scan, archive, retrieve, store, edit, distribute worldwide and manage the huge volume of documentation (paper drawings, CAD data and film-based information) generated in building, maintaining and ensuring safety in the UK's power plants. The power generation industry has recognized that the management and modification of operation critical information is vital to the safety and efficiency of its power plants. Regulatory pressure from the Nuclear Installations Inspectorate (NII) to operate within strict safety margins or lose Site Licences has prompted the need for accurate, up-to-data documentation. A document capture and management retrieval system provides a powerful cost-effective solution, giving rapid access to documentation in a tightly controlled environment. The computerisation of documents and plans is discussed in this article. (Author)

  6. 100-D Ponds closure plan. Revision 1

    International Nuclear Information System (INIS)

    Petersen, S.W.

    1997-09-01

    The 100-D Ponds is a Treatment, Storage, and Disposal (TSD) unit on the Hanford Facility that received both dangerous and nonregulated waste. This Closure Plan (Rev. 1) for the 100-D Ponds TSD unit consists of a RCRA Part A Dangerous Waste Permit Application (Rev. 3), a RCRA Closure Plan, and supporting information contained in the appendices to the plan. The closure plan consists of eight chapters containing facility description, process information, waste characteristics, and groundwater monitoring data. There are also chapters containing the closure strategy and performance standards. The strategy for the closure of the 100-D Ponds TSD unit is clean closure. Appendices A and B of the closure plan demonstrate that soil and groundwater beneath 100-D Ponds are below cleanup limits. All dangerous wastes or dangerous waste constituents or residues associated with the operation of the ponds have been removed, therefore, human health and the environment are protected. Discharges to the 100-D Ponds, which are located in the 100-DR-1 operable unit, were discontinued in June 1994. Contaminated sediment was removed from the ponds in August 1996. Subsequent sampling and analysis demonstrated that there is no contamination remaining in the ponds, therefore, this closure plan is a demonstration of clean closure

  7. High school Tay-Sachs disease carrier screening: 5 to 11-year follow-up.

    Science.gov (United States)

    Curd, Helen; Lewis, Sharon; Macciocca, Ivan; Sahhar, Margaret; Petrou, Vicki; Bankier, Agnes; Lieberman, Sari; Levy-Lahad, Ephrat; Delatycki, Martin B

    2014-04-01

    The Melbourne high school Tay-Sachs disease (TSD) carrier screening program began in 1997. The aim of this study was to assess the outcomes of this screening program among those who had testing more than 5 years ago, to evaluate the long-term impact of screening. A questionnaire was used for data collection and consisted of validated scales and purposively designed questions. Questionnaires were sent to all carriers and two non-carriers for each carrier who were screened in the program between 1999 and 2005. Twenty-four out of 69 (34.8 %) carriers and 30/138 (21.7 %) non-carriers completed the questionnaire. Most participants (82 %) retained good knowledge of TSD and there was no evidence of a difference in knowledge between carriers and non-carriers. Most participants (83 %) were happy with the timing and setting of screening and thought that education and screening for TSD should be offered during high school. There was no difference between carriers and non-carriers in mean scores for the State Trait Anxiety Inventory and Decision Regret Scale. This evaluation indicated that 5-11 years post high school screening, those who were screened are supportive of the program and that negative consequences are rare.

  8. Summary of available waste forecast data for the Environmental Restoration Program at the Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1994-08-01

    This report identifies patterns of Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) waste generation that are predicted by the current ER Waste Generation Forecast data base. It compares the waste volumes to be generated with the waste management capabilities of current and proposed treatment, storage, or disposal (TSD) facilities. The scope of this report is limited to wastes generated during activities funded by the Office of the Deputy Assistant Secretary for Environmental Restoration (EM-40) and excludes wastes from the decontamination and decommissioning of facilities. Significant quantities of these wastes are expected to be generated during ER activities. This report has been developed as a management tool supporting communication and coordination of waste management activities at ORNL. It summarizes the available data for waste that will be generated as a result of remediation activities under the direction of the U.S. Department of Energy Oak Ridge Operations Office and identifies areas requiring continued waste management planning and coordination. Based on the available data, it is evident that most remedial action wastes leaving the area of contamination can be managed adequately with existing and planned ORR waste management facilities if attention is given to waste generation scheduling and the physical limitations of particular TSD facilities. Limited use of off-site commercial TSD facilities is anticipated, provided the affected waste streams can be shown to satisfy the requirements of the performance objective for certification of non-radioactive hazardous waste and the waste acceptance criteria of the off-site facilities. Ongoing waste characterization will be required to determine the most appropriate TSD facility for each waste stream

  9. Piping support load data base for nuclear plants

    International Nuclear Information System (INIS)

    Childress, G.G.

    1991-01-01

    Nuclear Station Modifications are continuous through the life of a Nuclear Power Plant. The NSM often impacts an existing piping system and its supports. Prior to implementation of the NSM, the modified piping system is qualified and the qualification documented. This manual review process is tedious and an obvious bottleneck to engineering productivity. Collectively, over 100,000 piping supports exist at Duke Power Company's Nuclear Stations. Engineering support must maintain proper documentation of all data for each support. Duke Power Company has designed and developed a mainframe based system that: directly uses Support Load Summary data generated by a piping analysis computer program; streamlines the pipe support evaluation process; easily retrieves As-Built and NSM information for any pipe support from an NSM or AS-BUILT data base; and generated documentation for easy traceability of data to the information source. This paper discusses the design considerations for development of Support Loads Database System (SLDB) and reviews the program functionality through the user menus

  10. Documentation: an effective tool in Farmer Field Schools

    NARCIS (Netherlands)

    Belder, den E.; Garcia, M.; Jansen, D.M.

    2006-01-01

    In the “Sustainable Coffee Project Peru”, relevant and well documented data has played an important role in supporting the learning processes of the Farmer Field Schools. This is illustrated here with three examples: a survey of the coffee farmers’ situation as a basis for developing the content of

  11. Next-generation DNA sequencing of HEXA: a step in the right direction for carrier screening

    Science.gov (United States)

    Hoffman, Jodi D; Greger, Valerie; Strovel, Erin T; Blitzer, Miriam G; Umbarger, Mark A; Kennedy, Caleb; Bishop, Brian; Saunders, Patrick; Porreca, Gregory J; Schienda, Jaclyn; Davie, Jocelyn; Hallam, Stephanie; Towne, Charles

    2013-01-01

    Tay-Sachs disease (TSD) is the prototype for ethnic-based carrier screening, with a carrier rate of ∼1/27 in Ashkenazi Jews and French Canadians. HexA enzyme analysis is the current gold standard for TSD carrier screening (detection rate ∼98%), but has technical limitations. We compared DNA analysis by next-generation DNA sequencing (NGS) plus an assay for the 7.6 kb deletion to enzyme analysis for TSD carrier screening using 74 samples collected from participants at a TSD family conference. Fifty-one of 74 participants had positive enzyme results (46 carriers, five late-onset Tay-Sachs [LOTS]), 16 had negative, and seven had inconclusive results. NGS + 7.6 kb del screening of HEXA found a pathogenic mutation, pseudoallele, or variant of unknown significance (VUS) in 100% of the enzyme-positive or obligate carrier/enzyme-inconclusive samples. NGS detected the B1 allele in two enzyme-negative obligate carriers. Our data indicate that NGS can be used as a TSD clinical carrier screening tool. We demonstrate that NGS can be superior in detecting TSD carriers compared to traditional enzyme and genotyping methodologies, which are limited by false-positive and false-negative results and ethnically focused, limited mutation panels, respectively, but is not ready for sole use due to lack of information regarding some VUS. PMID:24498621

  12. Quality of life among pediatric patients with cancer: Contributions of time since diagnosis and parental chronic stress.

    Science.gov (United States)

    Hamner, Taralee; Latzman, Robert D; Latzman, Natasha E; Elkin, T David; Majumdar, Suvankar

    2015-07-01

    Pediatric cancer is associated with a host of negative psychosocial consequences; however, outcomes vary extensively suggesting a need to better understand this variation. Empirical research suggests a positive association between time since diagnosis (TSD) and Quality of Life (QoL). In addition to TSD, family stressors have been found to be particularly important in predicting QoL among children. The current study examined parental chronic stress beyond TSD in explanation of QoL functioning among a sample of pediatric patients with cancer. Participants included 43 pediatric patients aged 5-18 years (M(age) = 10.2 ± 3.6) who were undergoing oncological treatment. Parents reported on TSD, child's QoL, and their own chronic stress. TSD was associated with greater physical functioning (r = 0.30, P stress was associated with poorer emotional (r = -0.54, P stress contributed incrementally beyond TSD in the explanation of physical (β = -0.37, t = -2.58, P stress is associated with reduced levels of emotional, physical, and social functioning among pediatric patients. Future research is needed to further investigate the process by which chronic stress within the family interferes with adaptive coping among pediatric patients. In addition, clinical services may benefit from increased consideration of family factors, such as parental chronic stress, during oncological treatment. © 2015 Wiley Periodicals, Inc.

  13. Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  14. Wind system documentation

    Energy Technology Data Exchange (ETDEWEB)

    Froggatt, J.R.; Tatum, C.P.

    1993-01-15

    Atmospheric transport and diffusion models have been developed by the Environmental Technology Section (ETS) of the Savannah River Technology Center to calculate the location and concentration of toxic or radioactive materials during an accidental release at the Savannah River Site (SRS). The output from these models has been used to support initial on-site and off-site emergency response activities such as protective action decision making and field monitoring coordination. These atmospheric transport and diffusion models have been incorporated into an automated computer-based system called the (Weather Information and Display) System and linked to real-time meteorological and radiological monitoring instruments to provide timely information for these emergency response activities (Hunter, 1990). This report documents various aspects of the WIND system.

  15. FTC advertising substantiation program. Household products manufacturers. Documentation of Hakuhodo Advertising America, Inc

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The report contains documentation in support of claims that the Toshiba Microwave Oven can cook any and all types of food satisfactorily with a 75% savings in energy usage and cost, regardless of the size of a household. (Portions of this document are not fully legible)

  16. Spectrum analysis on quality requirements consideration in software design documents.

    Science.gov (United States)

    Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

    2013-12-01

    Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

  17. PROJECT ENGINEERING DATA MANAGEMENT AT AUTOMATED PREPARATION OF DESIGN DOCUMENTATION

    Directory of Open Access Journals (Sweden)

    A. V. Guryanov

    2017-01-01

    Full Text Available We have developed and realized instrumental means for automated support of end-to-end design process for design documentation on a product at the programming level. The proposed decision is based on processing of the engineering project data that are contained in interdependent design documents: tactical technical characteristics of products, data on the valuable metals contained in them, the list of components applied in a product and others. Processing of engineering data is based on their conversion to the form provided by requirements of industry standards for design documentation preparation. The general graph of the design documentation developed on a product is provided. The description of the developed software product is given. Automated preparation process of interdependent design documents is shown on the example of preparation of purchased products list. Results of work can be used in case of research and development activities on creation of perspective samples of ADP equipment.

  18. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Leach, Matt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-06-05

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  19. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  20. Advanced Photon Source experimental beamline Safety Assessment Document: Addendum to the Advanced Photon Source Accelerator Systems Safety Assessment Document (APS-3.2.2.1.0)

    International Nuclear Information System (INIS)

    1995-01-01

    This Safety Assessment Document (SAD) addresses commissioning and operation of the experimental beamlines at the Advanced Photon Source (APS). Purpose of this document is to identify and describe the hazards associated with commissioning and operation of these beamlines and to document the measures taken to minimize these hazards and mitigate the hazard consequences. The potential hazards associated with the commissioning and operation of the APS facility have been identified and analyzed. Physical and administrative controls mitigate identified hazards. No hazard exists in this facility that has not been previously encountered and successfully mitigated in other accelerator and synchrotron radiation research facilities. This document is an updated version of the APS Preliminary Safety Analysis Report (PSAR). During the review of the PSAR in February 1990, the APS was determined to be a Low Hazard Facility. On June 14, 1993, the Acting Director of the Office of Energy Research endorsed the designation of the APS as a Low Hazard Facility, and this Safety Assessment Document supports that designation

  1. Waste and Encapsulation Storage Facility (WESF) Essential and Support Drawing List

    International Nuclear Information System (INIS)

    SHANNON, W.R.

    1999-01-01

    This supporting document provides a detailed list of the Essential and Support drawing for the Waste and Storage Encapsulation Facility. The drawings identified in this document will comprise the Waste Encapsulation and Storage Facility essential and support drawing list. This list will replace drawings identified as the ''WESF Essential and support drawing list''. Additionally, this document will follow the applicable requirements of HNF-PRO-242 Engineering Drawing Requirements'' and FSP-WESF-001, Section EN-1 ''Documenting Engineering Changes''. An essential drawing is defined as an engineering drawing identified by the facility staff as necessary to directly support the safe operation or maintenance of the facility. A support drawing is defined as a drawing identified by the facility staff that further describes the design details of structures, systems, or components shown on essential drawings or is frequently used by the support staff

  2. Model documentation report: Transportation sector model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model. This document serves three purposes. First, it is a reference document providing a detailed description of TRAN for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, 57(b)(1)). Third, it permits continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  3. Generation of HEXA-deficient hiPSCs from fibroblasts of a Tay-Sachs disease patient.

    Science.gov (United States)

    Liu, Zhong; Zhao, Rui

    2016-09-01

    Human iPSC line TSD-01-hiPSC was generated from fibroblasts of a patient with infantile Tay-Sachs disease (TSD). The patient is compound heterozygous at the HEXA gene by carrying a 1278insTATC allele and an IVS12+1G>C allele. STEMCCA lentivirus, which expresses OCT4, SOX2, KLF4, and c-MYC from a polycistronic transcript, were used for reprogramming. TSD-01-hiPSC express pluripotency markers such as OCT4, SOX2, NANOG, Tra-1-60, and alkaline phosphatase, and can differentiate into tissues from all the three embryonic germ layers. This TSD patient-derived hiPSC line may serve as a valuable in vitro tool for disease modeling and drug test. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  4. IAEA support for operating nuclear reactors

    International Nuclear Information System (INIS)

    Akira, O.

    2010-01-01

    The IAEA programme, under the pillar of science and technology, provides support to the existing fleet of nuclear power plants (NPPs) for excellence in operation, support to new countries for infrastructure development, stimulating technology innovation for sustainable development and building national capability. Practical activities include methodology development, information sharing and providing guidance documents and state-of-the-art reports, networking of research activities, and review services using guidance documents as a basis of evaluation. This paper elaborates more on the IAEA's activities in support of the existing fleet of nuclear power plants

  5. 222-S laboratory quality assurance plan

    International Nuclear Information System (INIS)

    Meznarich, H.K.

    1995-01-01

    This document provides quality assurance guidelines and quality control requirements for analytical services. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing 222-S and 222-SA analytical and quality control activities. The 222-S Laboratory provides analytical services to various clients including, but not limited to, waste characterization for the Tank Waste Remediation Systems (TWRS), waste characterization for regulatory waste treatment, storage, and disposal (TSD), regulatory compliance samples, radiation screening, process samples, and TPA samples. A graded approach is applied on the level of sample custody, QC, data verification, and data reporting to meet the specific needs of the client

  6. TECHNICAL BASIS FOR VENTILATION REQUIREMENTS IN TANK FARMS OPERATING SPECIFICATIONS DOCUMENTS

    Energy Technology Data Exchange (ETDEWEB)

    BERGLIN, E J

    2003-06-23

    This report provides the technical basis for high efficiency particulate air filter (HEPA) for Hanford tank farm ventilation systems (sometimes known as heating, ventilation and air conditioning [HVAC]) to support limits defined in Process Engineering Operating Specification Documents (OSDs). This technical basis included a review of older technical basis and provides clarifications, as necessary, to technical basis limit revisions or justification. This document provides an updated technical basis for tank farm ventilation systems related to Operation Specification Documents (OSDs) for double-shell tanks (DSTs), single-shell tanks (SSTs), double-contained receiver tanks (DCRTs), catch tanks, and various other miscellaneous facilities.

  7. Monitored Retrievable Storage System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design

  8. CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    S. Drummond

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F and OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses

  9. Documentation Service

    International Nuclear Information System (INIS)

    Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

    1998-01-01

    This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

  10. On the Use of an ER-213 Detonator to Establish a Baseline for the ER-486

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Keith A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Liechty, Gary H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jaramillo, Dennis C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Munger, Alan C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McHugh, Douglas C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kennedy, James E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-08-19

    This report documents a series of tests using a TSD-115 fireset coupled with an ER-213, a gold exploding bridgewire (EBW) detonator. These tests were designed to fire this EBW with a smaller fireset to obtain current and voltage data as well as timing information at voltage levels below, above, and throughout the threshold firing region. This study could then create a database for comparison to our current ER-486 EBW development, which is designed to be a lower voltage (<500V) device.

  11. The disposition and pharmacokinetics of Dioscorea nipponica ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-11-19

    Nov 19, 2008 ... INTRODUCTION. In China, the total saponins of dioscorea (TSD) had long been used ... 1), which were extracted from Dioscorea nipponica. Makino. TSD is ..... Press of Science and Technology of Chinese. Medicine: Beijing ...

  12. Communications data delivery system analysis : public workshop read-ahead document.

    Science.gov (United States)

    2012-04-09

    This document presents an overview of work conducted to date around development and analysis of communications data delivery systems for : supporting transactions in the connected vehicle environment. It presents the results of technical analysis of ...

  13. Cultural diversity: blind spot in medical curriculum documents, a document analysis.

    Science.gov (United States)

    Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

    2014-08-22

    Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

  14. Subject (of documents)

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

  15. Model documentation renewable fuels module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the 1997 Annual Energy Outlook forecasts. The report catalogues and describes modeling assumptions, computational methodologies, data inputs. and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described. This documentation report serves three purposes. First, it is a reference document for model analysts, model users, and the public interested in the construction and application of the RFM. Second, it meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Finally, such documentation facilitates continuity in EIA model development by providing information sufficient to perform model enhancements and data updates as part of EIA`s ongoing mission to provide analytical and forecasting information systems.

  16. Model documentation renewable fuels module of the National Energy Modeling System

    International Nuclear Information System (INIS)

    1997-04-01

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the 1997 Annual Energy Outlook forecasts. The report catalogues and describes modeling assumptions, computational methodologies, data inputs. and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described. This documentation report serves three purposes. First, it is a reference document for model analysts, model users, and the public interested in the construction and application of the RFM. Second, it meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Finally, such documentation facilitates continuity in EIA model development by providing information sufficient to perform model enhancements and data updates as part of EIA's ongoing mission to provide analytical and forecasting information systems

  17. Design Document for Control Dewar and Vacuum Pump Platforms

    International Nuclear Information System (INIS)

    Rucinksi, R.

    1997-01-01

    This engineering note documents the design of the control dewar and vacuum pump platform that is to be installed on the D-Zero detector. It's purpose is twofold. Firstly it is a summary and repository of the final design calculations of the structure. Secondly, it documents that design follows the American Institute of Steel Construction (AISC) manual and applicable OSHA requirements with respect to walking working surfaces. The information contained in the main body of this note is supported by raw calculations included as the appendix. The platform is a truss type frame strucrure constructed primarily of rectangular steel tubing. The upper platform is for support of the control dewar (cryogenic/electrical interface for the solenoid), visible light photon counter (VLPC) cryogenic bayonet can, and infrequently, personnel during the connection and disconnection of the detector to building services. Figure 1 shows a layout of the structure as mounted on the detector and with the installed equipment. The connection of the platform to the detector is not conventional. Two main booms cantilever the structure to a location outside of the detector. The mounting location and support booms allow for the uninhibited motion of the detector components.

  18. TECHNICAL DOCUMENT PREPARATION PLAN FOR THE RETRIEVABILITY STRATEGY REPORT

    International Nuclear Information System (INIS)

    P.D. Gehner

    1997-01-01

    The objective of this systems study is to produce a waste removability strategy document that contains sufficient details, recommended design alternatives, and the technical rationale (a) to support Licensing in the development of the License Application Plan, and (b) to provide input in the form of design requirements, for the FY 97 Retrieval Design & Operation activity in support of viability assessment. The intent of this systems study is to support a decision on how to proceed with design with respect to retrievability, regarding the extent to which the repository/waste package designs should accommodate the retrieval option

  19. Compilation of Quality Assurance Documentation for Analyses Performed for the Resumption of Transient Testing Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Schafer, Annette L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sondrup, A. Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    This is a companion document to the analyses performed in support of the environmental assessment for the Resumption of Transient Fuels and Materials Testing. It is provided to allow transparency of the supporting calculations. It provides computer code input and output. The basis for the calculations is documented separately in INL (2013) and is referenced, as appropriate. Spreadsheets used to manipulate the code output are not provided.

  20. Underground Test Area Subproject Phase I Data Analysis Task. Volume VII - Tritium Transport Model Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  1. TSD acceptance testing in Australia

    OpenAIRE

    Wix, Richard

    2014-01-01

    Structural Session 3: Current Applications Moderated by Larry Scofield This presentation was held at the Pavement Evaluation 2014 Conference, which took place from September 15-18, 2014 in Blacksburg, Virginia. Presentation only

  2. Distinct sperm nucleus behaviors between genotypic and temperature-dependent sex determination males are associated with replication and expression-related pathways in a gynogenetic fish.

    Science.gov (United States)

    Zhu, Yao-Jun; Li, Xi-Yin; Zhang, Jun; Li, Zhi; Ding, Miao; Zhang, Xiao-Juan; Zhou, Li; Gui, Jian-Fang

    2018-06-05

    Coexistence and transition of diverse sex determination strategies have been revealed in some ectothermic species, but the variation between males caused by different sex determination strategies and the underlying mechanism remain unclear. Here, we used the gynogenetic gibel carp (Carassius gibelio) with both genotypic sex determination (GSD) and temperature-dependent sex determination (TSD) strategies to illustrate this issue. We found out that males of GSD and TSD in gibel carp had similar morphology, testicular histology, sperm structure and sperm vitality. However, when maternal individuals were mated with males of GSD, sperm nucleus swelling and fusing with the female pronucleus were observed in the fertilized eggs. On the contrary, when maternal individuals were mated with males of TSD, sperm nucleus remained in the condensed status throughout the whole process. Subsequently, semen proteomics analysis unveiled that DNA replication and gene expression-related pathways were inhibited in the sperm from males of TSD compared to males of GSD, and most differentially expressed proteins associated with DNA replication, transcription and translation were down-regulated. Moreover, via BrdU incorporation and immunofluorescence detection, male nucleus replication was revealed to be present in the fertilized eggs by the sperm from males of GSD, but absent in the fertilized eggs by the sperm from males of TSD. These findings indicate that DNA replication and gene expression-related pathways are associated with the distinct sperm nucleus development behaviors in fertilized eggs in response to the sperm from males of GSD and TSD. And this study is the first attempt to screen the differences between males determined via GSD and TSD in gynogenetic species, which might give a hint for understanding evolutionary adaption of diverse sex determination mechanisms in unisexual vertebrates.

  3. Reestimación de la tasa social de descuento en Colombia a partir del desarrollo de su mercado de capitales durante el período 1995 – 2005

    Directory of Open Access Journals (Sweden)

    Romel Rodríguez Hernández

    2007-07-01

    Full Text Available La disminución de la tasa de inflación a niveles de un dígito, la reducción del riesgo país por la reducción en las tasas de los Títulos de deuda pública interna emitidos por el Estado (TES y externa, Global y Yankees, y el desarrollo del mercado de capitales, han motivado la necesidad de reestimar la Tasa Social de Descuento actual (TSD del 12% con la que se ha venido haciendo la evaluación socioeconómica y financiera de proyectos de inversión para el caso colombiano. Bajo las mismas causas que justifican el ejercicio para el caso colombiano, ejercicios recientes de reestimación de la TSD en los países miembros de la Unión Económica Europea han determinado que la TSD nominal actual se encuentra en un nivel promedio del 3%. Este cambio en el nivel de las tasas de interés ha sido extensivo a países de América Latina donde se han hecho reestimaciones de la TSD siguiendo el criterio de eficiencia de Harberger que tiene en cuenta cuatro elementos: el ahorro interno, el ahorro externo, la inversión privada y el endeudamiento externo. El presente trabajo, siguiendo el criterio de eficiencia de Harberger, reestima la TSD de Colombia obteniéndose una TSD promedio de 8.5%, incluyendo una prima por riesgo en función de la volatilidad del consumo y de la aversión al riesgo del inversionista. Se concluye, de acuerdo con la metodología de Harberger, que en la determinación de la TSD el mayor ponderador es el ahorro interno, seguido del endeudamiento externo, influyendo en menor cuantía la inversión interna.

  4. Reactive documentation system

    Science.gov (United States)

    Boehnlein, Thomas R.; Kramb, Victoria

    2018-04-01

    Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

  5. Molecular imaging of in vivo calcium ion expression in area postrema of total sleep deprived rats: Implications for cardiovascular regulation by TOF-SIMS analysis

    Science.gov (United States)

    Mai, Fu-Der; Chen, Li-You; Ling, Yong-Chien; Chen, Bo-Jung; Wu, Un-In; Chang, Hung-Ming

    2010-05-01

    Excessive calcium influx in chemosensitive neurons of area postrema (AP) is detrimental for sympathetic activation and participates in the disruption of cardiovascular activities. Since total sleep deprivation (TSD) is a stressful condition known to harm the cardiovascular function, the present study is aimed to determine whether the in vivo calcium expression in AP would significantly alter following TSD by the use of time-of-flight secondary ion mass spectrometry (TOF-SIMS) and calretinin (a specific calcium sensor protein in AP neurons) immunohistochemistry. The results indicated that in normal rats, the calcium intensity was estimated to be 0.5 × 10 5 at m/ z 40.08. However, following TSD, the intensity for calcium ions was greatly increased to 1.2 × 10 5. Molecular imaging revealed that after TSD, various strongly expressed calcium signals were distributed throughout AP with clear identified profiles instead of randomly scattered within this region in normal rats. Immunohistochemical staining corresponded well with ionic image in which a majority of calcium-enriched gathering co-localized with calretinin positive neurons. The functional significance of TSD-induced calcium augmentation was demonstrated by increased heart rate and mean arterial pressure, clinical markers for cardiovascular dysfunction. Considering AP-mediated sympathetic activation is important for cardiovascular regulation, exaggerated calcium influx in AP would render this neurocircuitry more vulnerable to over-excitation, which might serve as the underlying mechanism for the development of TSD-relevant cardiovascular deficiency.

  6. Improving accuracy of Tay Sachs carrier screening of the non-Jewish population: analysis of 34 carriers and six late-onset patients with HEXA enzyme and DNA sequence analysis.

    Science.gov (United States)

    Park, Noh Jin; Morgan, Craig; Sharma, Rajesh; Li, Yuanyin; Lobo, Raynah M; Redman, Joy B; Salazar, Denise; Sun, Weimin; Neidich, Julie A; Strom, Charles M

    2010-02-01

    The purpose of this study was to determine whether combining different testing modalities namely beta-hexosaminidase A (HEXA) enzyme analysis, HEXA DNA common mutation assay, and HEXA gene sequencing could improve the sensitivity for carrier detection in non-Ashkenazi (AJ) individuals. We performed a HEXA gene sequencing assay, a HEXA DNA common mutation assay, and a HEXA enzyme assay on 34 self-reported Tay-Sachs disease (TSD) carriers, six late-onset patients with TSD, and one pseudodeficiency allele carrier. Sensitivity of TSD carrier detection was 91% for gene sequencing compared with 91% for the enzyme assay and 52% for the DNA mutation assay. Gene sequencing combined with enzyme testing had the highest sensitivity (100%) for carrier detection. Gene sequencing detected four novel mutations, three of which are predicted to be disease causing [118.delT, 965A-->T (D322V), and 775A-->G (T259A)]. Gene sequencing is useful in identifying rare mutations in patients with TSD and their families, in evaluating spouses of known carriers for TSD who have indeterminate enzyme analysis and negative for common mutation analysis, and in resolving ambiguous enzyme testing results.

  7. Sleep Deprivation Alters Choice Strategy Without Altering Uncertainty or Loss Aversion Preferences

    Directory of Open Access Journals (Sweden)

    O'Dhaniel A Mullette-Gillman

    2015-10-01

    Full Text Available Sleep deprivation alters decision making; however, it is unclear what specific cognitive processes are modified to drive altered choices. In this manuscript, we examined how one night of total sleep deprivation (TSD alters economic decision making. We specifically examined changes in uncertainty preferences dissociably from changes in the strategy with which participants engage with presented choice information. With high test-retest reliability, we show that TSD does not alter uncertainty preferences or loss aversion. Rather, TSD alters the information the participants rely upon to make their choices. Utilizing a choice strategy metric which contrasts the influence of maximizing and satisficing information on choice behavior, we find that TSD alters the relative reliance on maximizing information and satisficing information, in the gains domain. This alteration is the result of participants both decreasing their reliance on cognitively-complex maximizing information and a concomitant increase in the use of readily-available satisficing information. TSD did not result in a decrease in overall information use in either domain. These results show that sleep deprivation alters decision making by altering the informational strategies that participants employ, without altering their preferences.

  8. Sleep deprivation alters choice strategy without altering uncertainty or loss aversion preferences.

    Science.gov (United States)

    Mullette-Gillman, O'Dhaniel A; Kurnianingsih, Yoanna A; Liu, Jean C J

    2015-01-01

    Sleep deprivation alters decision making; however, it is unclear what specific cognitive processes are modified to drive altered choices. In this manuscript, we examined how one night of total sleep deprivation (TSD) alters economic decision making. We specifically examined changes in uncertainty preferences dissociably from changes in the strategy with which participants engage with presented choice information. With high test-retest reliability, we show that TSD does not alter uncertainty preferences or loss aversion. Rather, TSD alters the information the participants rely upon to make their choices. Utilizing a choice strategy metric which contrasts the influence of maximizing and satisficing information on choice behavior, we find that TSD alters the relative reliance on maximizing information and satisficing information, in the gains domain. This alteration is the result of participants both decreasing their reliance on cognitively-complex maximizing information and a concomitant increase in the use of readily-available satisficing information. TSD did not result in a decrease in overall information use in either domain. These results show that sleep deprivation alters decision making by altering the informational strategies that participants employ, without altering their preferences.

  9. Starlink Document Styles

    Science.gov (United States)

    Lawden, M. D.

    This document describes the various styles which are recommended for Starlink documents. It also explains how to use the templates which are provided by Starlink to help authors create documents in a standard style. This paper is concerned mainly with conveying the ``look and feel" of the various styles of Starlink document rather than describing the technical details of how to produce them. Other Starlink papers give recommendations for the detailed aspects of document production, design, layout, and typography. The only style that is likely to be used by most Starlink authors is the Standard style.

  10. Recoded and nonrecoded trinary signed-digit adders and multipliers with redundant-bit representations

    Science.gov (United States)

    Cherri, Abdallah K.; Alam, Mohammed S.

    1998-07-01

    Highly-efficient two-step recoded and one-step nonrecoded trinary signed-digit (TSD) carry-free adders subtracters are presented on the basis of redundant-bit representation for the operands digits. It has been shown that only 24 (30) minterms are needed to implement the two-step recoded (the one-step nonrecoded) TSD addition for any operand length. Optical implementation of the proposed arithmetic can be carried out by use of correlation- or matrix-multiplication-based schemes, saving 50% of the system memory. Furthermore, we present four different multiplication designs based on our proposed recoded and nonrecoded TSD adders. Our multiplication designs require a small number of reduced minterms to generate the multiplication partial products. Finally, a recently proposed pipelined iterative-tree algorithm can be used in the TSD adders multipliers; consequently, efficient use of all available adders can be made.

  11. Document understanding for a broad class of documents

    NARCIS (Netherlands)

    Aiello, Marco; Monz, Christof; Todoran, Leon; Worring, Marcel

    2002-01-01

    We present a document analysis system able to assign logical labels and extract the reading order in a broad set of documents. All information sources, from geometric features and spatial relations to the textual features and content are employed in the analysis. To deal effectively with these

  12. Air pollution and public health: a guidance document for risk managers.

    Science.gov (United States)

    Craig, Lorraine; Brook, Jeffrey R; Chiotti, Quentin; Croes, Bart; Gower, Stephanie; Hedley, Anthony; Krewski, Daniel; Krupnick, Alan; Krzyzanowski, Michal; Moran, Michael D; Pennell, William; Samet, Jonathan M; Schneider, Jurgen; Shortreed, John; Williams, Martin

    2008-01-01

    This guidance document is a reference for air quality policymakers and managers providing state-of-the-art, evidence-based information on key determinants of air quality management decisions. The document reflects the findings of five annual meetings of the NERAM (Network for Environmental Risk Assessment and Management) International Colloquium Series on Air Quality Management (2001-2006), as well as the results of supporting international research. The topics covered in the guidance document reflect critical science and policy aspects of air quality risk management including i) health effects, ii) air quality emissions, measurement and modeling, iii) air quality management interventions, and iv) clean air policy challenges and opportunities.

  13. Extra dimensions: 3D and time in PDF documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2011-01-01

    Experimental science is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide, non-technical audience. We discuss how the field of radiation imaging could benefit from incorporating full 3D information about not only the detectors, but also the results of the experimental analyses, in its electronic publications. In this article, we present examples drawn from high-energy physics, mathematics and molecular biology which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input.

  14. How Are Researching and Reading Interwieved during Retrieval from Hierarchically Structured Documents?

    DEFF Research Database (Denmark)

    Hertzum, Morten; Lalmas, M.; Frøkjær, Erik

    2001-01-01

    Effective use of information retrieval systems requires that users know when to – temporarily – cease searching to do some reading and where to start reading. In hierarchically structured documents, users can to some extent interchange searching and reading by entering the text at different levels...... information retrieval systems could exploit document structure to return the best points to support reading, rather than merely hits...

  15. CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Drummond

    2005-04-12

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses.

  16. Criteria Document for B-plant's Surveillance and Maintenance Phase Safety Basis Document

    International Nuclear Information System (INIS)

    SCHWEHR, B.A.

    1999-01-01

    This document is required by the Project Hanford Managing Contractor (PHMC) procedure, HNF-PRO-705, Safety Basis Planning, Documentation, Review, and Approval. This document specifies the criteria that shall be in the B Plant surveillance and maintenance phase safety basis in order to obtain approval of the DOE-RL. This CD describes the criteria to be addressed in the S and M Phase safety basis for the deactivated Waste Fractionization Facility (B Plant) on the Hanford Site in Washington state. This criteria document describes: the document type and format that will be used for the S and M Phase safety basis, the requirements documents that will be invoked for the document development, the deactivated condition of the B Plant facility, and the scope of issues to be addressed in the S and M Phase safety basis document

  17. The Amistad Research Center: Documenting the African American Experience.

    Science.gov (United States)

    Chepesiuk, Ron

    1993-01-01

    Describes the Amistad Research Center housed at Tulane University which is a repository of primary documents on African-American history. Topics addressed include the development and growth of the collection; inclusion of the American Missionary Association archives; sources of support; civil rights; and collecting for the future. (LRW)

  18. Generic safety documentation model

    International Nuclear Information System (INIS)

    Mahn, J.A.

    1994-04-01

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

  19. Management Documentation: Indicators & Good Practice at Cultural Heritage Places

    Science.gov (United States)

    Eppich, R.; Garcia Grinda, J. L.

    2015-08-01

    Documentation for cultural heritage places usually refers to describing the physical attributes, surrounding context, condition or environment; most of the time with images, graphics, maps or digital 3D models in their various forms with supporting textural information. Just as important as this type of information is the documentation of managerial attributes. How do managers of cultural heritage places collect information related to financial or economic well-being? How are data collected over time measured, and what are significant indicators for improvement? What quality of indicator is good enough? Good management of cultural heritage places is essential for conservation longevity, preservation of values and enjoyment by the public. But how is management documented? The paper will describe the research methodology, selection and description of attributes or indicators related to good management practice. It will describe the criteria for indicator selection and why they are important, how and when they are collected, by whom, and the difficulties in obtaining this information. As importantly it will describe how this type of documentation directly contributes to improving conservation practice. Good practice summaries will be presented that highlight this type of documentation including Pamplona and Ávila, Spain and Valletta, Malta. Conclusions are drawn with preliminary recommendations for improvement of this important aspect of documentation. Documentation of this nature is not typical and presents a unique challenge to collect, measure and communicate easily. However, it is an essential category that is often ignored yet absolutely essential in order to conserve cultural heritage places.

  20. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  1. Documentation Driven Development for Complex Real-Time Systems

    Science.gov (United States)

    2004-12-01

    This paper presents a novel approach for development of complex real - time systems , called the documentation-driven development (DDD) approach. This... time systems . DDD will also support automated software generation based on a computational model and some relevant techniques. DDD includes two main...stakeholders to be easily involved in development processes and, therefore, significantly improve the agility of software development for complex real

  2. Public comments on the proposed 10 CFR Part 51 rule for renewal of nuclear power plant operating licenses and supporting documents: Review of concerns and NRC staff response. Volume 1

    International Nuclear Information System (INIS)

    1996-05-01

    This report documents the Nuclear Regulatory Commission (NRC) staff review of public comments provided in response to the NRC's proposed amendments to 10 Code of Federal Regulations (CFR) Part 51, which establish new requirements for the environmental review of applications for the renewal of operating licenses of nuclear power plants. The public comments include those submitted in writing, as well as those provided at public meetings that were held with other Federal agencies, State agencies, nuclear industry representatives, public interest groups, and the general public. This report also contains the NRC staff response to the various concerns raised, and highlights the changes made to the final rule and the supporting documents in response to these concerns

  3. A graded approach to safety documentation at processing facilities

    International Nuclear Information System (INIS)

    Cowen, M.L.

    1992-01-01

    Westinghouse Savannah River Company (WSRC) has over 40 major Safety Analysis Reports (SARs) in preparation for non-reactor facilities. These facilities include nuclear material production facilities, waste management facilities, support laboratories and environmental remediation facilities. The SARs for these various projects encompass hazard levels from High to Low, and mission times from startup, through operation, to shutdown. All of these efforts are competing for scarce resources, and therefore some mechanism is required for balancing the documentation requirements. Three of the key variables useful for the decision making process are Depth of Safety Analysis, Urgency of Safety Analysis, and Resource Availability. This report discusses safety documentation at processing facilities

  4. Bechtel automated control of design document data

    International Nuclear Information System (INIS)

    Hollingshaus, H.

    1986-01-01

    Concern for nuclear power plant safety has resulted in many design features that complicate the licensing, operation, and maintenance of nuclear plants. To manage and control the design effectively, Bechtel has developed an integrated design document data base that provides efficient support of the plant during all phases of its life. The program runs on the IBM System 38, but can also be downloaded to an IBM PC to save storage and connect time. It is interactive and can accommodate multiple users at various locations. Although primarily developed to manage design changes resulting from the regulatory process and use of a fast track construction schedule, the data base will provide operations and maintenance personnel with qualifications status and pertinent data for each piece of equipment, including all electrical devices and a list of all associated design documents

  5. Documenting Employee Conduct

    Science.gov (United States)

    Dalton, Jason

    2009-01-01

    One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

  6. Total saponin of Dioscoreae hypoglaucae rhizoma ameliorates streptozotocin-induced diabetic nephropathy

    Directory of Open Access Journals (Sweden)

    Guo C

    2016-02-01

    Full Text Available Changrun Guo,1 Gang Ding,2 Wenzhe Huang,2 Zhenzhong Wang,2 Zhaoqing Meng,1,2 Wei Xiao2 1State Key Laboratory of Natural Medicines, China Pharmaceutical University, Nanjing, People’s Republic of China; 2Jiangsu Kanion Pharmaceutical Co. Ltd, Lianyungang City, People’s Republic of China Background: Diabetic nephropathy has become the most common cause of morbidity and mortality in diabetic patients. Therefore, there is an urgent need for more effective and safer drugs for use in this condition.Purpose: The aims of this study were to investigate the ameliorative effects of total saponin of Dioscoreae hypoglaucae rhizoma (TSD on diabetic nephropathy and to explore the potential underlying mechanism(s.Methods: Rats with streptozotocin-induced diabetes were orally treated with TSD at 40, 80, and 160 mg/kg/d for 12 weeks. At the end of the treatment, blood, urine, and kidneys were collected for biochemical and histological examination.Results: The results demonstrated that TSD significantly decreased the fasting blood glucose, glycosylated hemoglobin, urinary protein, serum creatinine, and blood urea nitrogen levels in diabetic rats. The results of histological examinations showed that TSD ameliorated glomerular and tubular pathological changes in diabetic rats. Furthermore, TSD significantly prevented oxidative stress and reduced the renal levels of advanced glycation end products, transforming growth factor-β1, connective tissue growth factor, and tumor necrosis factor-α.Conclusion: This study demonstrated the renoprotective effects of TSD in experimental diabetic nephropathy via a number of different mechanisms. Keywords: total saponin of Dioscoreae hypoglaucae rhizoma, diabetic nephropathy, oxidative stress, AGEs, TGF-β1

  7. Health physics documentation

    International Nuclear Information System (INIS)

    Stablein, G.

    1980-01-01

    When dealing with radioactive material the health physicist receives innumerable papers and documents within the fields of researching, prosecuting, organizing and justifying radiation protection. Some of these papers are requested by the health physicist and some are required by law. The scope, quantity and deposit periods of the health physics documentation at the Karlsruhe Nuclear Research Center are presented and rationalizing methods discussed. The aim of this documentation should be the application of physics to accident prevention, i.e. documentation should protect those concerned and not the health physicist. (H.K.)

  8. Model documentation report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 1997 (AEO 97). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code. This document serves three purposes. First it is a reference document providing a detailed description of the NEMS MAM used for the AEO 1997 production runs for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  9. Comparison of the guidance documents in support of EU risk assessments with those for the derivation of EU water quality standards

    NARCIS (Netherlands)

    Vos JH; Janssen MPM; SEC

    2005-01-01

    Risks of both new and existing substances and of biocides in Europe are being evaluated using the Technical Guidance Document (TGD). The European Water Framework Directive refers to this document for establishing Environmental Quality Standards (EQSs) for water. Another guidance document for the

  10. Factors that Influence Women's Technical Skill Development in Outdoor Adventure

    Science.gov (United States)

    Warren, Karen; Loeffler, TA

    2006-01-01

    This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

  11. Iranian EFL Teachers' Perceptions of Teacher Self-Disclosure

    Science.gov (United States)

    Rahimi, Ali; Askari Bigdeli, Rouhollah

    2016-01-01

    Teacher self-disclosure (TSD) as a communication behavior can influence students' learning by increasing their engagement and class participation as well as helping them establish effective interpersonal relationships. Owning to its context-sensitive and culture-dependent nature, however, TSD topics, purposes, and considerations may vary…

  12. Extra dimensions: 3d and time in pdf documentation

    Energy Technology Data Exchange (ETDEWEB)

    Graf, N A [Stanford Linear Accelerator Center, Menlo Park, CA, 94025 (United States)], E-mail: Norman.Graf@slac.stanford.edu

    2008-07-15

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself.

  13. Extra dimensions: 3d and time in pdf documentation

    International Nuclear Information System (INIS)

    Graf, N A

    2008-01-01

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself

  14. Tay-Sachs disease in an Arab family due to c.78G>A HEXA nonsense mutation encoding a p.W26X early truncation enzyme peptide.

    Science.gov (United States)

    Haghighi, Alireza; Masri, Amira; Kornreich, Ruth; Desnick, Robert J

    2011-12-01

    Tay-Sachs disease (TSD), a pan-ethnic, autosomal recessive, neurodegenerative, lysosomal disease, results from deficient β-hexosaminidase A activity due to β-hexosaminidase α-subunit (HEXA) mutations. Prenatal/premarital carrier screening programs in the Ashkenazi Jewish community have markedly reduced disease occurrence. We report the first Jordanian Arab TSD patient diagnosed by deficient β-hexosaminidase A activity. HEXA mutation analysis revealed homozygosity for a nonsense mutation, c.78G>A (p.W26X). Previously reported in Arab patients, this mutation is a candidate for TSD screening in Arab populations. Copyright © 2011 Elsevier Inc. All rights reserved.

  15. Areva - 2016 Reference document

    International Nuclear Information System (INIS)

    2017-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 36,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva

  16. Large-Scale Brain Network Coupling Predicts Total Sleep Deprivation Effects on Cognitive Capacity.

    Directory of Open Access Journals (Sweden)

    Yu Lei

    Full Text Available Interactions between large-scale brain networks have received most attention in the study of cognitive dysfunction of human brain. In this paper, we aimed to test the hypothesis that the coupling strength of large-scale brain networks will reflect the pressure for sleep and will predict cognitive performance, referred to as sleep pressure index (SPI. Fourteen healthy subjects underwent this within-subject functional magnetic resonance imaging (fMRI study during rested wakefulness (RW and after 36 h of total sleep deprivation (TSD. Self-reported scores of sleepiness were higher for TSD than for RW. A subsequent working memory (WM task showed that WM performance was lower after 36 h of TSD. Moreover, SPI was developed based on the coupling strength of salience network (SN and default mode network (DMN. Significant increase of SPI was observed after 36 h of TSD, suggesting stronger pressure for sleep. In addition, SPI was significantly correlated with both the visual analogue scale score of sleepiness and the WM performance. These results showed that alterations in SN-DMN coupling might be critical in cognitive alterations that underlie the lapse after TSD. Further studies may validate the SPI as a potential clinical biomarker to assess the impact of sleep deprivation.

  17. Up-regulation of Na + expression in the area postrema of total sleep deprived rats by TOF-SIMS analysis

    Science.gov (United States)

    Mai, Fu-Der; Chen, Bo-Jung; Ling, Yong-Chien; Wu, Un-In; Huang, Yi-Lun; Chang, Hung-Ming

    2008-12-01

    Area postrema (AP) is a circumventricular organ plays an important role in sodium homeostasis and cardiovascular regulation. Since sleep deficiency will cause cardiovascular dysfunction, the present study aims to determine whether sodium level would significantly alter in AP following total sleep deprivation (TSD). Sodium level was investigated in vivo by time-of-flight secondary ion mass spectrometry (TOF-SIMS). Clinical manifestation of cardiovascular function was demonstrated by mean arterial pressure (MAP) values. Results indicated that in normal rats, TOF-SIMS spectrum revealed a major peak of sodium ion counting as 5.61 × 10 5 at m/ z 23. The sodium ions were homogeneous distributed in AP without specific localization. However, following TSD, the sodium intensity was relatively increased (6.73 × 10 5) and the signal for sodium image was strongly expressed throughout AP with definite spatial distribution. MAP of TSD rats is 138 ± 5 mmHg, which is significantly higher than that of normal ones (121 ± 3 mmHg). Regarding AP is an important area for sodium sensation and development of hypernatremic related sympatho-excitation; up-regulation of sodium expression following TSD suggests that high sodium level might over-activate AP, through complex neuronal networks involving in sympathetic regulation, which could lead to the formation of TSD relevant cardiovascular diseases.

  18. The effects of caffeine ingestion on the reaction time and short-term maximal performance after 36 h of sleep deprivation.

    Science.gov (United States)

    Souissi, Makram; Chtourou, Hamdi; Abedelmalek, Salma; Ghozlane, Imen Ben; Sahnoun, Zouhair

    2014-05-28

    The aim of the present study was to investigate the effects of caffeine ingestion on cognitive and physical performances after 36h of sleep deprivation. In randomized order, thirteen healthy male physical education students (age: 21.1±1.1years, body mass: 77.1±7.2kg, height: 1.77±0.06m) completed four test sessions at 18:00h: after placebo or 5mg·kg(-1) of caffeine ingestion during a baseline night (RN) (bed time: from 22:30h to 07:00h) or a night of 36h of sleep deprivation (TSD). During each test session, participants performed the squat jump (SJ), the reaction time, and the 30-s Wingate tests (i.e., for the measurement of the peak (PP) and mean (MP) powers and the fatigue index (FI)). The results showed that PP and MP decreased and FI increased during the TSD compared to RN in the placebo condition (pcaffeine ingestion improved PP after TSD compared to RN (pcaffeine ingestions (pcaffeine ingestion during RN and TSD (pcaffeine ingestion only during the TSD (pcaffeine is an effective strategy to counteract the effect of 36h of sleep loss on physical and cognitive performances. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. A database for TMT interface control documents

    Science.gov (United States)

    Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

    2016-08-01

    The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

  20. Implementing the EuroFIR Document and Data Repositories as accessible resources of food composition information.

    Science.gov (United States)

    Unwin, Ian; Jansen-van der Vliet, Martine; Westenbrink, Susanne; Presser, Karl; Infanger, Esther; Porubska, Janka; Roe, Mark; Finglas, Paul

    2016-02-15

    The EuroFIR Document and Data Repositories are being developed as accessible collections of source documents, including grey literature, and the food composition data reported in them. These Repositories will contain source information available to food composition database compilers when selecting their nutritional data. The Document Repository was implemented as searchable bibliographic records in the Europe PubMed Central database, which links to the documents online. The Data Repository will contain original data from source documents in the Document Repository. Testing confirmed the FoodCASE food database management system as a suitable tool for the input, documentation and quality assessment of Data Repository information. Data management requirements for the input and documentation of reported analytical results were established, including record identification and method documentation specifications. Document access and data preparation using the Repositories will provide information resources for compilers, eliminating duplicated work and supporting unambiguous referencing of data contributing to their compiled data. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Community Documentation Centre on Industrial Risk. Bulletin no. 8

    International Nuclear Information System (INIS)

    Masera, M.; Rasmussen, K.

    1993-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  2. Community Documentation Centre on Industrial Risk. Bulletin no. 4

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  3. Community Documentation Centre on Industrial Risk. Bulletin no. 10

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.

    1996-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  4. Community Documentation Centre on Industrial Risk. Bulletin no. 5

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-11-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  5. Community Documentation Centre on Industrial Risk. Bulletin no. 7

    International Nuclear Information System (INIS)

    Gow, H.B.F.; Carditello, I.

    1993-04-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  6. Community Documentation Centre on Industrial Risk. Bulletin no. 9

    International Nuclear Information System (INIS)

    Perschke, A.

    1995-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  7. Community Documentation Centre on Industrial Risk. Bulletin no. 6

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1992-06-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  8. Community Documentation Centre on Industrial Risk. Bulletin no. 11

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.; Carnevali, C.

    1997-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  9. NASA Hybrid Wing Aircraft Aeroacoustic Test Documentation Report

    Science.gov (United States)

    Heath, Stephanie L.; Brooks, Thomas F.; Hutcheson, Florence V.; Doty, Michael J.; Bahr, Christopher J.; Hoad, Danny; Becker, Lawrence; Humphreys, William M.; Burley, Casey L.; Stead, Dan; hide

    2016-01-01

    This report summarizes results of the Hybrid Wing Body (HWB) N2A-EXTE model aeroacoustic test. The N2A-EXTE model was tested in the NASA Langley 14- by 22-Foot Subsonic Tunnel (14x22 Tunnel) from September 12, 2012 until January 28, 2013 and was designated as test T598. This document contains the following main sections: Section 1 - Introduction, Section 2 - Main Personnel, Section 3 - Test Equipment, Section 4 - Data Acquisition Systems, Section 5 - Instrumentation and Calibration, Section 6 - Test Matrix, Section 7 - Data Processing, and Section 8 - Summary. Due to the amount of material to be documented, this HWB test documentation report does not cover analysis of acquired data, which is to be presented separately by the principal investigators. Also, no attempt was made to include preliminary risk reduction tests (such as Broadband Engine Noise Simulator and Compact Jet Engine Simulator characterization tests, shielding measurement technique studies, and speaker calibration method studies), which were performed in support of this HWB test. Separate reports containing these preliminary tests are referenced where applicable.

  10. Software simulator for property investigation of document management system with RFID tags

    Directory of Open Access Journals (Sweden)

    Kiedrowicz Maciej

    2016-01-01

    Full Text Available The study outlines the method for examining the properties of the RFID-tagged document management system. The system is composed of computers, where the software for supporting processes of the RFID-tagged doc-uments was installed. Furthermore, the system cooperates with many other elements of the secret office (cabinets, sluices, photocopiers, desks. The examination of the properties of the RFID-tagged document management system is, in this case, complex due to the number of a possible examination scenarios. The simulation method for examining the system properties was proposed. It allows to conduct the examination of the properties in a short period of time for numerous testing scenarios.

  11. Standardization Documents

    Science.gov (United States)

    2011-08-01

    Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

  12. Final Documentation: Incident Management And Probabilities Courses of action Tool (IMPACT).

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Donna M.; Ray, Jaideep; Tucker, Mark D.; Whetzel, Jonathan; Cauthen, Katherine Regina

    2018-03-01

    This report pulls together the documentation produced for the IMPACT tool, a software-based decision support tool that provides situational awareness, incident characterization, and guidance on public health and environmental response strategies for an unfolding bio-terrorism incident.

  13. and poly(methyl methacrylate)

    Indian Academy of Sciences (India)

    materials forming electrets. Thermally stimulated discharge. (TSD) is a conventional technique for investigation of charge storage and transport processes in high resistivity materi- als and devices. For the standard TSD experiment, which is comparable to a dielectric loss measurement, the low equi- valent frequency (≈ 10.

  14. REVEAL: Software Documentation and Platform Migration

    Science.gov (United States)

    Wilson, Michael A.; Veibell, Victoir T.

    2011-01-01

    The Research Environment for Vehicle Embedded Analysis on Linux (REVEAL) is reconfigurable data acquisition software designed for network-distributed test and measurement applications. In development since 2001, it has been successfully demonstrated in support of a number of actual missions within NASA's Suborbital Science Program. Improvements to software configuration control were needed to properly support both an ongoing transition to operational status and continued evolution of REVEAL capabilities. For this reason the project described in this report targets REVEAL software source documentation and deployment of the software on a small set of hardware platforms different from what is currently used in the baseline system implementation. This presentation specifically describes the actions taken over a ten week period by two undergraduate student interns and serves as an overview of the content of the final report for that internship.

  15. Tay-Sachs disease: current perspectives from Australia.

    Science.gov (United States)

    Lew, Raelia M; Burnett, Leslie; Proos, Anné L; Delatycki, Martin B

    2015-01-01

    Tay-Sachs disease (TSD) is a fatal, recessively inherited neurodegenerative condition of infancy and early childhood. Although rare in most other populations, the carrier frequency is one in 25 in Ashkenazi Jews. Australian high-school-based TSD preconception genetic screening programs aim to screen, educate, and optimize reproductive choice for participants. These programs have demonstrated high uptake, low psychological morbidity, and have been shown to result in fewer than expected Jewish TSD-affected births over 18 years of operation. The majority of Jewish individuals of reproductive age outside of the high school screening program setting in Australia have not accessed screening. Recent recommendations advocate supplementing the community high school screening programs with general practitioner- and obstetrician-led genetic screening of Ashkenazi Jewish individuals for TSD and other severe recessive diseases for which this group is at risk. Massively parallel DNA sequencing is expected to become the testing modality of choice over the coming years.

  16. Waste and Encapsulation Storage Facility (WESF) Essential and Support Drawing List

    International Nuclear Information System (INIS)

    SHANNON, W.R.

    1999-01-01

    Provides listing of Essential and Support Drawings for the Waste and Encapsulation Storage Facility. The drawings identified in this document will comprise the Waste Encapsulation and Storage Facility essential and support drawing list. This list will replace drawings identified as the ''WESF Essential and support drawing list''. Additionally, this document will follow the applicable requirements of HNF-PRO-242 Engineering Drawing Requirements'' and FSP-WESF-001, Section EN-1 ''Documenting Engineering Changes''. An essential drawing is defined as an engineering drawing identified by the facility staff as necessary to directly support the safe operation or maintenance of the facility. A support drawing is defined as a drawing identified by the facility staff that further describes the design details of structures, systems, or components shown on essential drawings or is frequently used by the support staff

  17. Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

    International Nuclear Information System (INIS)

    Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.; Lin, T.; Haley, T.A.; Barto, A.B.; Stutzke, M.A.

    1996-01-01

    The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to that team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document

  18. BASINs 4.0 Climate Assessment Tool (CAT): Supporting ...

    Science.gov (United States)

    EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of Research and Development, that focuses on assessing how potential changes in climate and other global environmental stressors may impact water quality, air quality, aquatic ecosystems, and human health in the United States. The Program’s focus on water quality is consistent with the Research Strategy of the U.S. Climate Change Research Program—the federal umbrella organization for climate change science in the U.S. government—and is responsive to U.S. EPA’s mission and responsibilities as defined by the Clean Water Act and the Safe Drinking Water Act. A central goal of the EPA GCRP is to provide EPA program offices, Regions, and other stakeholders with tools and information for assessing and responding to any potential future impacts of climate change. In 2007, the EPA Global Change Research Program (GCRP), in partnership with the EPA Office of Water, supported development of a Climate Assessment Tool (CAT) for version 4 of EPA’s BASINS modeling system. This report provides supporting documentation and user support materials for the BASINS CAT tool. The purpose of this report is to provide in a single document a variety of documentation and user support materials supporting the use

  19. Managing the Documentation Maze Answers to Questions You Didn't Even Know to Ask

    CERN Document Server

    Gough, Janet

    2010-01-01

    This book deals with a topic of critical importance for compliance with record-keeping regulations in pharmaceutical and medical device industries. It presents more than 750 questions and answers about documentation management, whether electronic or paper-based. It defines, through a Q&A approach, what document management actually is, and why it should be a core discipline in the industry. Questions and responses also address electronic system selection and validation, system security, user accountability, and audit trails, as well as standard operating procedures for supporting document syste

  20. VOC-Arid Integrated Demonstration guide to preparation of demonstration documents

    International Nuclear Information System (INIS)

    Jensen, E.J.; Brouns, T.M.; Koegler, K.J.; McCabe, G.H.; Morris, F.A.

    1994-06-01

    This guide has been prepared by Demonstration Operations of the Volatile Organic Compound-Arid Integrated Demonstration (VOC-Arid ID). Its purpose is to describe demonstration documents, designate responsibilities for these documents, and guide the Principal Investigator (PI) and others in their preparation. The main emphasis of this guide is to describe the documentation required of the PI. However, it does cover some of the responsibilities of other members of the VOC-Arid ID team. The VOC-Arid ID is one of several US Department of Energy (DOE) integrated demonstrations designed to support the demonstration of emerging environmental management and restoration technologies. The principal objective of the VOC-Arid ID is to identify, develop, and demonstrate new and innovative technologies for environmental restoration at arid or semiarid sites containing volatile organic compounds with or without associated contamination (e.g., radionuclides and metals)

  1. Documentation of acceptable knowledge for LANL Plutonium Facility transuranic waste streams

    International Nuclear Information System (INIS)

    Montoya, A.J.; Gruetzmacher, K.; Foxx, C.; Rogers, P.S.Z.

    1998-01-01

    Characterization of transuranic waste from the LANL Plutonium Facility for certification and transportation to WIPP includes the use of acceptable knowledge as specified in the WIPP Quality Assurance Program Plan. In accordance with a site-specific procedure, documentation of acceptable knowledge for retrievably stored and currently generated transuranic waste streams is in progress at LANL. A summary overview of the transuranic waste inventory is complete and documented in the Sampling Plan. This document also includes projected waste generation, facility missions, waste generation processes, flow diagrams, times, and material inputs. The second part of acceptable knowledge documentation consists of assembling more detailed acceptable knowledge information into auditable records and is expected to require several years to complete. These records for each waste stream must support final assignment of waste matrix parameters, EPA hazardous waste numbers, and radionuclide characterization. They must also include a determination whether waste streams are defense waste streams for compliance with the WIPP Land Withdrawal Act. The LANL Plutonium Facility's mission is primarily plutonium processing in basic special nuclear material (SNM) research activities to support national defense and energy programs. It currently has about 100 processes ranging from SNM recovery from residues to development of plutonium 238 heat sources for space applications. Its challenge is to characterize and certify waste streams from such diverse and dynamic operations using acceptable knowledge. This paper reports the progress on the certification of the first of these waste streams to the WIPP WAC

  2. Establishment of ''Internal Rules'' and EDMS - Electronic Document Management System at NPP NEK

    International Nuclear Information System (INIS)

    Mandic, D.

    2012-01-01

    The main purpose of this paper is to present NPP's plans regarding the on-going project that started in November 2011, and that is related to the establishment of ''Internal Rules'' and EDMS - Electronic Document Management System.The term ''Internal Rules'' has been directly translated from Slovenian language (''Notranja pravila'') and adopted from the translated version of appropriate Slovenian national codes (ZVDAGA [1] in Slovenian language or PDAAIA [2] in English version). ''Internal Rules on capture and storage of materials in digital form'' refer to the rules adopted by a person as his/her internal act with reference to storage of his/her material. The main purpose for the establishment of the Internal Rules is to be able to justify that Krsko NPP is organized in compliance with the national codes covering that subject and strictly performing according to those Internal Rules. Once a Slovenian company achieves recognized and registered status in accordance with the Internal Rules document that has been certified and approved by the ARS (Archives of the Republic Slovenia), such company can utilize e-documents in the same way as they would utilize physical documents. Furthermore, a Slovenian company with approved Internal Rules can use e-documents in any legal aspect associated with the document's life cycle and the document's content as they would use the physical document or an authorized and approved copy of the physical document. Related to the nuclear regulatory background, NEK operates in compliance with the Slovenian legislation and also the US codes, regulations and guidelines; therefore, regarding the NPP specific documents, the Internal Rules and EDMS must also be in compliance with them. Since early 1990's, NEK has implemented document/records management system oriented towards supporting storage and management of physical documents/records and controlling distribution of active document copies. Document/records management system was supported by

  3. Waste and Encapsulation Storage Facility (WESF) Essential and Support Drawing List

    International Nuclear Information System (INIS)

    SHANNON, W.R.

    1999-01-01

    The drawings identified in this document will comprise the Waste Encapsulation and Storage Facility essential and support drawing list. This list will replace drawings identified as the ''WESF Essential and support drawing list''. Additionally, this document will follow the applicable requirements of HNF-PRO-242 ''Engineering Drawing Requirements'' and FSP-WESF-001, Section EN-1 ''Documenting Engineering Changes''. An essential drawing is defined as an engineering drawing identified by the facility staff as necessary to directly support the safe operation or maintenance of the facility. A support drawing is defined as a drawing identified by the facility staff that further describes the design details of structures, systems, or components shown on essential drawings or is frequently used by the support staff

  4. Waste and Encapsulation Storage Facility (WESF) Essential and Support Drawing List

    International Nuclear Information System (INIS)

    SHANNON, W.R.

    1999-01-01

    The drawings identified in this document will comprise the Waste Encapsulation and Storage Facility essential and support drawing list. This list will replace drawings identified as the ''WESF Essential and support drawing list''. Additionally, this document will follow the applicable requirements of HNF-PRO-242'' Engineering Drawing Requirements'' and FSP-WESF-001, Section EN-1 ''Documenting Engineering Changes''. An essential drawing is defined as an engineering drawing identified by the facility staff as necessary to directly support the safe operation or maintenance of the facility. A support drawing is defined as a drawing identified by the facility staff that further describes the design details of structures, systems, or components shown on essential drawings or is frequently used by the support staff

  5. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  6. Synthesis document on the long time behavior of packages: operational document ''bituminous'' 2204

    International Nuclear Information System (INIS)

    Tiffreau, C.

    2004-09-01

    This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of bituminous sludges packages is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the water alteration of the packages and the associated radioelements release, as the gas term source and the swelling associated to the self-irradiation and the bituminous radiolysis. (A.L.B.)

  7. Sampling and analysis plan for the 100-D Ponds voluntary remediation project

    International Nuclear Information System (INIS)

    1996-08-01

    This Sampling and Analysis Plan (SAP) describes the sampling and analytical activities which will be performed to support closure of the 100-D Ponds Resource Conservation and Recovery Act (RCRA) treatment, storage, and/or disposal (TSD) unit. This SAP includes the Field Sampling Plan (FSP) presented in Section 2.0, and the Quality Assurance Project Plan (QAPjP) described in Section 3.0. The FSP defines the sampling and analytical methodologies to be performed, and the QAPjP provides or includes information on the requirements for precision, accuracy, representativeness, comparability, and completeness of the analytical data. This sampling and analysis plan was developed using the Environmental Protection Agency's Seven-Step Data Quality Objectives (DQO) Guidance (EPA, 1994). The purpose of the DQO meetings was (1) to identify the contaminants of concern and their cleanup levels under the Washington State Model Toxics Control Act (MTCA, WAC-173-340) Method B, and (2) to determine the number and locations of samples necessary to verify that the 100-D Ponds meet the cleanup criteria. The data collected will be used to support RCRA closure of this TSD unit

  8. Securing XML Documents

    Directory of Open Access Journals (Sweden)

    Charles Shoniregun

    2004-11-01

    Full Text Available XML (extensible markup language is becoming the current standard for establishing interoperability on the Web. XML data are self-descriptive and syntax-extensible; this makes it very suitable for representation and exchange of semi-structured data, and allows users to define new elements for their specific applications. As a result, the number of documents incorporating this standard is continuously increasing over the Web. The processing of XML documents may require a traversal of all document structure and therefore, the cost could be very high. A strong demand for a means of efficient and effective XML processing has posed a new challenge for the database world. This paper discusses a fast and efficient indexing technique for XML documents, and introduces the XML graph numbering scheme. It can be used for indexing and securing graph structure of XML documents. This technique provides an efficient method to speed up XML data processing. Furthermore, the paper explores the classification of existing methods impact of query processing, and indexing.

  9. Development of a computer system for support and documentation of clearance of buildings of nuclear installations - 59278

    International Nuclear Information System (INIS)

    Winkler, Christoph; Woerlen, Stefan; Thierfeldt, Stefan; Schartmann, Frank

    2012-01-01

    . Many steps of the data evaluation and report generation during the clearance process outlined above can now be carried out automatically. This includes the time-consuming steps of - support during the acquisition of the geometry data for a room, - generation of the lists for sampling and measurements, - automatic acquisition of the measurement and sampling results from the instruments, - evaluation of compliance with clearance levels, both for measurements on the entire surface and for statistically distributed measurements or samples, - generation of the documentation on clearance, - storage of all data, generation of nuclide vectors, correction for radioactive decay, connection with photo, CAD drawings etc. (authors)

  10. Catechol-O-methyltransferase (COMT) genotype affects cognitive control during total sleep deprivation.

    Science.gov (United States)

    Satterfield, Brieann C; Hinson, John M; Whitney, Paul; Schmidt, Michelle A; Wisor, Jonathan P; Van Dongen, Hans P A

    2018-02-01

    Adaptive decision making is profoundly impaired by total sleep deprivation (TSD). This suggests that TSD impacts fronto-striatal pathways involved in cognitive control, where dopamine is a key neuromodulator. In the prefrontal cortex (PFC), dopamine is catabolized by the enzyme catechol-O-methyltransferase (COMT). A functional polymorphism (Val158Met) influences COMT's enzymatic activity, resulting in markedly different levels of prefrontal dopamine. We investigated the effect of this polymorphism on adaptive decision making during TSD. Sixty-six healthy young adults participated in one of two in-laboratory studies. After a baseline day, subjects were randomized to either a TSD group (n = 32) with 38 h or 62 h of extended wakefulness or a well-rested control group (n = 34) with 10 h nighttime sleep opportunities. Subjects performed a go/no-go reversal learning (GNGr) task at well-rested baseline and again during TSD or equivalent control. During the task, subjects were required to learn stimulus-response relationships from accuracy feedback. The stimulus-response relationships were reversed halfway through the task, which required subjects to learn the new stimulus-response relationships from accuracy feedback. Performance on the GNGr task was quantified by discriminability (d') between go and no-go stimuli before and after the stimulus-response reversal. GNGr performance did not differ between COMT genotypes when subjects were well-rested. However, TSD exposed a significant vulnerability to adaptive decision making impairment in subjects with the Val allele. Our results indicate that sleep deprivation degrades cognitive control through a fronto-striatal, dopaminergic mechanism. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Increased Automaticity and Altered Temporal Preparation Following Sleep Deprivation.

    Science.gov (United States)

    Kong, Danyang; Asplund, Christopher L; Ling, Aiqing; Chee, Michael W L

    2015-08-01

    Temporal expectation enables us to focus limited processing resources, thereby optimizing perceptual and motor processing for critical upcoming events. We investigated the effects of total sleep deprivation (TSD) on temporal expectation by evaluating the foreperiod and sequential effects during a psychomotor vigilance task (PVT). We also examined how these two measures were modulated by vulnerability to TSD. Three 10-min visual PVT sessions using uniformly distributed foreperiods were conducted in the wake-maintenance zone the evening before sleep deprivation (ESD) and three more in the morning following approximately 22 h of TSD. TSD vulnerable and nonvulnerable groups were determined by a tertile split of participants based on the change in the number of behavioral lapses recorded during ESD and TSD. A subset of participants performed six additional 10-min modified auditory PVTs with exponentially distributed foreperiods during rested wakefulness (RW) and TSD to test the effect of temporal distribution on foreperiod and sequential effects. Sleep laboratory. There were 172 young healthy participants (90 males) with regular sleep patterns. Nineteen of these participants performed the modified auditory PVT. Despite behavioral lapses and slower response times, sleep deprived participants could still perceive the conditional probability of temporal events and modify their level of preparation accordingly. Both foreperiod and sequential effects were magnified following sleep deprivation in vulnerable individuals. Only the foreperiod effect increased in nonvulnerable individuals. The preservation of foreperiod and sequential effects suggests that implicit time perception and temporal preparedness are intact during total sleep deprivation. Individuals appear to reallocate their depleted preparatory resources to more probable event timings in ongoing trials, whereas vulnerable participants also rely more on automatic processes. © 2015 Associated Professional Sleep

  12. Understanding and Detecting Supporting Arguments of Diverse Types

    OpenAIRE

    Hua, Xinyu; Wang, Lu

    2017-01-01

    We investigate the problem of sentence-level supporting argument detection from relevant documents for user-specified claims. A dataset containing claims and associated citation articles is collected from online debate website idebate.org. We then manually label sentence-level supporting arguments from the documents along with their types as study, factual, opinion, or reasoning. We further characterize arguments of different types, and explore whether leveraging type information can facilita...

  13. Information Types in Nonmimetic Documents: A Review of Biddle's Wipe-Clean Slate (Understanding Documents).

    Science.gov (United States)

    Mosenthal, Peter B.; Kirsch, Irwin S.

    1991-01-01

    Describes how the 16 permanent lists used by a first grade reading teacher (and mother of 6) to manage the household represents the whole range of documents covered in the 3 major types of documents: matrix documents, graphic documents, and locative documents. Suggests class activities to clarify students' understanding of the information in…

  14. Technical approach document

    International Nuclear Information System (INIS)

    1988-04-01

    This document describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement Remedial Action Plans (RAPs) and final designs that comply with EPS standards. This document is a revision to the original document. Major revisions were made to the sections in riprap selection and sizing, and ground-water; only minor revisions were made to the remainder of the document. The US Nuclear Regulatory Commission (NRC) has prepared a Standard Review Plan (NRC-SRP) which describes factors to be considered by the NRC in approving the RAP. Sections 3.0, 4.0, 5.0, and 7.0 of this document are arranged under the same headings as those used in the NRC-SRP. This approach is adopted in order to facilitate joint use of the documents. Section 2.0 (not included in the NRC-SRP) discusses design considerations; Section 3.0 describes surface-water hydrology and erosion control; Section 4.0 describes geotechnical aspects of pile design; Section 5.0 discusses the Alternate Site Selection Process; Section 6.0 deals with radiological issues (in particular, the design of the radon barrier); Section 7.0 discusses protection of groundwater resources; and Section 8.0 discusses site design criteria for the RAC

  15. Characterization equipment essential/support drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings and Support Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). Support Drawings: Are those drawings identified by facility staff that further describe the design details of structures, systems, or components shown on essential drawings. (HNF 1997a) The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered General drawings until the Characterization Equipment Drawing Evaluation Report (Wilson 1998) is updated during fiscal year 1999. Trucks 1 and 2 drawings are not included in this revision of the essential drawing list due to uncertainty about future use

  16. Hanford Waste Vitrification Plant technical background document for best available radionuclide control technology demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, A.B.; Skone, S.S.; Rodenhizer, D.G.; Marusich, M.V. (Ebasco Services, Inc., Bellevue, WA (USA))

    1990-10-01

    This report provides the background documentation to support applications for approval to construct and operate new radionuclide emission sources at the Hanford Waste Vitrification Plant (HWVP) near Richland, Washington. The HWVP is required to obtain permits under federal and state statutes for atmospheric discharges of radionuclides. Since these permits must be issued prior to construction of the facility, draft permit applications are being prepared, as well as documentation to support these permits. This report addresses the applicable requirements and demonstrates that the preferred design meets energy, environmental, and economic criteria for Best Available Radionuclide Control Technology (BARCT) at HWVP. 22 refs., 11 figs., 25 tabs.

  17. Hanford Waste Vitrification Plant technical background document for best available radionuclide control technology demonstration

    International Nuclear Information System (INIS)

    Carpenter, A.B.; Skone, S.S.; Rodenhizer, D.G.; Marusich, M.V.

    1990-10-01

    This report provides the background documentation to support applications for approval to construct and operate new radionuclide emission sources at the Hanford Waste Vitrification Plant (HWVP) near Richland, Washington. The HWVP is required to obtain permits under federal and state statutes for atmospheric discharges of radionuclides. Since these permits must be issued prior to construction of the facility, draft permit applications are being prepared, as well as documentation to support these permits. This report addresses the applicable requirements and demonstrates that the preferred design meets energy, environmental, and economic criteria for Best Available Radionuclide Control Technology (BARCT) at HWVP. 22 refs., 11 figs., 25 tabs

  18. EIA model documentation: Petroleum Market Model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-30

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA`s legal obligation to provide adequate documentation in support of its models (Public Law 94-385, section 57.b.2). The PMM models petroleum refining activities, the marketing of products, the production of natural gas liquids and domestic methanol, projects petroleum provides and sources of supplies for meeting demand. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption.

  19. Wildlife resource trends in the United States: A technical document supporting the 2000 RPA Assessment

    Science.gov (United States)

    Curtis H. Flather; Stephen J. Brady; Michael S. Knowles

    1999-01-01

    This report documents trends in wildlife resources for the nation as required by the Renewable Resources Planning Act (RPA) of 1974. The report focuses on recent historical trends in wildlife as one indicator of ecosystem health across the United States and updates wildlife trends presented in previous RPA Assessments. The report also shows short- and long-term...

  20. Support Vector Machines: Relevance Feedback and Information Retrieval.

    Science.gov (United States)

    Drucker, Harris; Shahrary, Behzad; Gibbon, David C.

    2002-01-01

    Compares support vector machines (SVMs) to Rocchio, Ide regular and Ide dec-hi algorithms in information retrieval (IR) of text documents using relevancy feedback. If the preliminary search is so poor that one has to search through many documents to find at least one relevant document, then SVM is preferred. Includes nine tables. (Contains 24…

  1. Developing an Interface to Order and Document Health Education Videos in the Electronic Health Record.

    Science.gov (United States)

    Wojcik, Lauren

    2015-01-01

    Transitioning to electronic health records (EHRs) provides an opportunity for health care systems to integrate educational content available on interactive patient systems (IPS) with the medical documentation system. This column discusses how one hospital simplified providers' workflow by making it easier to order educational videos and ensure that completed education is documented within the medical record. Integrating the EHR and IPS streamlined the provision of patient education, improved documentation, and supported the organization in meeting core requirements for Meaningful Use.

  2. Different male versus female breeding periodicity helps mitigate offspring sex ratio skews in sea turtles

    Directory of Open Access Journals (Sweden)

    Graeme Clive Hays

    2014-09-01

    Full Text Available The implications of climate change for global biodiversity may be profound with those species with little capacity for adaptation being thought to be particularly vulnerable to warming. A classic case of groups for concern are those animals exhibiting temperature-dependent sex-determination (TSD, such as sea turtles, where climate warming may produce single sex populations and hence extinction. We show that, globally, female biased hatchling sex ratios dominate sea turtle populations (exceeding 3:1 in >50% records, which, at-a-glance, reiterates concerns for extinction. However, we also demonstrate that more frequent breeding by males, empirically shown by satellite tracking 23 individuals and supported by a generalized bio-energetic life history model, generates more balanced operational sex ratios (OSRs. Hence, concerns of increasingly skewed hatchling sex ratios and reduced population viability are less acute than previously thought for sea turtles. In fact, in some scenarios skewed hatchling sex ratios in groups with TSD may be adaptive to ensure optimum OSRs.

  3. Record Recommendations for the CERN Document Server

    CERN Document Server

    AUTHOR|(CDS)2096025; Marian, Ludmila

    CERN Document Server (CDS) is the institutional repository of the European Organization for Nuclear Research (CERN). It hosts all the research material produced at CERN, as well as multi- media and administrative documents. It currently has more than 1.5 million records grouped in more than 1000 collections. It’s underlying platform is Invenio, an open source digital library system created at CERN. As the size of CDS increases, discovering useful and interesting records becomes more challenging. Therefore, the goal of this work is to create a system that supports the user in the discovery of related interesting records. To achieve this, a set of recommended records are displayed on the record page. These recommended records are based on the analyzed behavior (page views and downloads) of other users. This work will describe the methods and algorithms used for creating, implementing, and the integration with the underlying software platform, Invenio. A very important decision factor when designing a recomme...

  4. Skin infections in male pupils of primary schools in Al Ahsa

    Directory of Open Access Journals (Sweden)

    Montassar Amri

    2013-01-01

    Full Text Available Objectives: To determine the prevalence, the nature, and the possible socio-demographic risk factors involved in the development of common transmissible skin disorders (TSD among the studied population. Materials and Methods: A cross-sectional consecutive survey was carried out from November 15, 2008 to May 14, 2009 in Al-Ahsa governorate. This study included 1337 male primary school children. Data were collected using the following tools: Socio-demographics and hygienic habits according to pre-established forms and a thorough dermatological examination of all the included children. Results: The prevalence of TSD was 27.15% with a statistically significant difference according to rural/urban locations (33.74% vs. 22.27%. Fungal infections were the leading diseases (9.1% followed by bacterial infections (8.9%, parasitic infestations (4.3%, and viral infections (4.1%. TSD were significantly more frequent in students whose fathers have a primary or preparatory educational status and in the students having the habit to play barefooted. Conclusion: Our study found that TSD was relatively frequent among male primary school students in Al-Ahsa. Our study has several limitations. One major limitation is that female primary school students were excluded from the study. Despite this major limitation, we hope the findings may be useful in planning health care programs for Saudi children with the hope of reducing the prevalence of TSD in the future.

  5. Multiple Lines Of Evidence Supporting Natural Attenuation: Lines Of Inquiry Supporting Monitored Natural Attenuation And Enhanced Attenuatin Of Chlorinated Solvents

    Energy Technology Data Exchange (ETDEWEB)

    Vangelas, Karen; Widemeirer, T. H.; Barden, M.J.; Dickson, W. Z.; Major, David

    2004-12-31

    The Department of Energy (DOE) is sponsoring an initiative to facilitate efficient, effective and responsible use of Monitored Natural Attenuation (MNA) and Enhanced Attenuation (EA) for chlorinated solvents. This Office of Environmental Management (EM) ''Alternative Project,'' focuses on providing scientific and policy support for MNA/EA. A broadly representative working group of scientists supports the project along with partnerships with regulatory organizations such as the Interstate Technology Regulatory Council (ITRC) and the United States Environmental Protection Agency (USEPA). The initial product of the technical working group was a summary report that articulated the conceptual approach and central scientific tenants of the project, and that identified a prioritized listing of technical targets for field research. This report documented the process in which: (1) scientific ground rules were developed, (2) lines of inquiry were identified and then critically evaluated, (3) promising applied research topics were highlighted in the various lines of inquiry, and (4) these were discussed and prioritized. The summary report will serve as a resource to guide management and decision making throughout the period of the subject MNA/EA Alternative Project. To support and more fully document the information presented in the summary report, the DOE is publishing a series of supplemental documents that present the full texts from the technical analyses within the various lines of inquiry (see listing). The following report--documenting our evaluation of the state of the science for the lines of evidence for supporting decision-making for MNA--is one of those supplemental documents.

  6. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    International Nuclear Information System (INIS)

    GLASSCOCK, J.A.

    2000-01-01

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions

  7. CNEA's quality system documentation

    International Nuclear Information System (INIS)

    Mazzini, M.M.; Garonis, O.H.

    1998-01-01

    Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

  8. HEALTH AND ENVIRONMENTAL EFFECTS DOCUMENT ...

    Science.gov (United States)

    Health and Environmental Effects Documents (HEEDS) are prepared for the Office of Solid Waste and Emergency Response (OSWER). This document series is intended to support listings under the Resource Conservation and Recovery Act (RCRA) as well as to provide health-related limits and goals for emergency and remedial actions under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA). Both published literature and information obtained from Agency Program Office files are evaluated as they pertain to potential human health, aquatic life and environmental effects of hazardous waste constituents. Several quantitative estimates are presented provided sufficient data are available. For systemic toxicants, these include Reference Doses (RfDs) for chronic and subchronic exposures for both the inhalation and oral exposures. In the case of suspected carcinogens, RfDs may not be estimated. Instead, a carcinogenic potency factor, or q1*, is provided. These potency estimates are derived for both oral and inhalation exposures where possible. In addition, unit risk estimates for air and drinking water are presented based on inhalation and oral data, respectively. Reportable quantities (RQs) based on both chronic toxicity and carcinogenicity are derived. The RQ is used to determine the quantity of a hazardous substance for which notification is required in the event of a release as specified under CERCLA.

  9. Imaginary Documentary: reflecting upon contemporary documental photography Documentário Imaginário: reflexões sobre a fotografia documental contemporânea

    Directory of Open Access Journals (Sweden)

    Kátia Hallak Lombardi

    2008-01-01

    Full Text Available This article pursues the idea of an Imaginary Documentary – a possible new inflexion on the practices of contemporary documental photography. The text establishes its theoretical foundations through a forthcoming approach of the discussions about documental photography to the concept of imaginary, by Gilbert Durand, and the notion of Imaginary Museum, by André Malraux. Photographers that are part of documental photography history are the elected objects in which we shall confront the potentialities of the Imaginary Documentary. Este artigo tem como propósito buscar a estruturação da idéia de Documentário Imaginário – uma possível inflexão na prática da fotografia documental contemporânea. O texto assenta suas bases teóricas por meio da aproximação de reflexões sobre a fotografia documental ao conceito de imaginário em Gilbert Durand e à noção de Museu Imaginário de André Malraux. Fotógrafos que fazem parte da história da fotografia documental são os objetos eleitos para aferir as potencialidades do Documentário Imaginário.

  10. Guidance and Control Software Project Data - Volume 2: Development Documents

    Science.gov (United States)

    Hayhurst, Kelly J. (Editor)

    2008-01-01

    The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

  11. The Effect of Preprocessing on Arabic Document Categorization

    Directory of Open Access Journals (Sweden)

    Abdullah Ayedh

    2016-04-01

    Full Text Available Preprocessing is one of the main components in a conventional document categorization (DC framework. This paper aims to highlight the effect of preprocessing tasks on the efficiency of the Arabic DC system. In this study, three classification techniques are used, namely, naive Bayes (NB, k-nearest neighbor (KNN, and support vector machine (SVM. Experimental analysis on Arabic datasets reveals that preprocessing techniques have a significant impact on the classification accuracy, especially with complicated morphological structure of the Arabic language. Choosing appropriate combinations of preprocessing tasks provides significant improvement on the accuracy of document categorization depending on the feature size and classification techniques. Findings of this study show that the SVM technique has outperformed the KNN and NB techniques. The SVM technique achieved 96.74% micro-F1 value by using the combination of normalization and stemming as preprocessing tasks.

  12. Document management in engineering construction

    International Nuclear Information System (INIS)

    Liao Bing

    2008-01-01

    Document management is one important part of systematic quality management, which is one of the key factors to ensure the construction quality. In the engineering construction, quality management and document management shall interwork all the time, to ensure the construction quality. Quality management ensures that the document is correctly generated and adopted, and thus the completeness, accuracy and systematicness of the document satisfy the filing requirements. Document management ensures that the document is correctly transferred during the construction, and various testimonies such as files and records are kept for the engineering construction and its quality management. This paper addresses the document management in the engineering construction based on the interwork of the quality management and document management. (author)

  13. Building and documenting workflows with python-based snakemake

    OpenAIRE

    Köster, Johannes; Rahmann, Sven

    2012-01-01

    textabstractSnakemake is a novel workflow engine with a simple Python-derived workflow definition language and an optimizing execution environment. It is the first system that supports multiple named wildcards (or variables) in input and output filenames of each rule definition. It also allows to write human-readable workflows that document themselves. We have found Snakemake especially useful for building high-throughput sequencing data analysis pipelines and present examples from this area....

  14. Document Level Assessment of Document Retrieval Systems in a Pairwise System Evaluation

    Science.gov (United States)

    Rajagopal, Prabha; Ravana, Sri Devi

    2017-01-01

    Introduction: The use of averaged topic-level scores can result in the loss of valuable data and can cause misinterpretation of the effectiveness of system performance. This study aims to use the scores of each document to evaluate document retrieval systems in a pairwise system evaluation. Method: The chosen evaluation metrics are document-level…

  15. Shoulder dystocia documentation: an evaluation of a documentation training intervention.

    Science.gov (United States)

    LeRiche, Tammy; Oppenheimer, Lawrence; Caughey, Sharon; Fell, Deshayne; Walker, Mark

    2015-03-01

    To evaluate the quality and content of nurse and physician shoulder dystocia delivery documentation before and after MORE training in shoulder dystocia management skills and documentation. Approximately 384 charts at the Ottawa Hospital General Campus involving a diagnosis of shoulder dystocia between the years of 2000 and 2006 excluding the training year of 2003 were identified. The charts were evaluated for 14 key components derived from a validated instrument. The delivery notes were then scored based on these components by 2 separate investigators who were blinded to delivery note author, date, and patient identification to further quantify delivery record quality. Approximately 346 charts were reviewed for physician and nurse delivery documentation. The average score for physician notes was 6 (maximum possible score of 14) both before and after the training intervention. The nurses' average score was 5 before and after the training intervention. Negligible improvement was observed in the content and quality of shoulder dystocia documentation before and after nurse and physician training.

  16. Clinical correlation of radiological spinal stenosis after standardization for vertebral body size

    International Nuclear Information System (INIS)

    Athiviraham, A.; Yen, D.; Scott, C.; Soboleski, D.

    2007-01-01

    Aim: To determine the relationship between the degree of radiographic lumbar spinal stenosis, adjusted with an internal control for vertebral body size, and disability from lumbar stenosis. Materials and methods: one hundred and twenty-three consecutive patients with clinical and radiological confirmation of neural impingement secondary to lumbar stenosis were enrolled prospectively. Thecal sac anteroposterior (AP) diameter (TSD) and cross-sectional area (CSA), and vertebral body AP dimension (VBD) were determined. These parameters were then correlated with patients' symptoms using the modified Roland-Morris questionnaire (RMQ) disability score. Results: No statistically significant inverse correlation was found between the TSD and RMQ score (p = 0.433), between the CSA and RMQ score (p = 0.124), or between the TSD:VBD ratio and RMQ score (p = 0.109). There was a significant positive correlation between the CSA:VBD ratio and RMQ score (p = .036), and therefore, there was no statistical support for an inverse relationship between the two. There was a significant difference in mean RMQ scores when the patients were divided into those with CSA greater than or equal to 70 mm 2 and those less than 70 mm 2 , with T = -2.104 and p = 0.038. Conclusion: The degree of radiographic lumbar spinal stenosis, even with the use of an internal control of vertebral body size and standardized disability questionnaires, does not correlate with clinical symptoms. However, patients with more severe stenosis below a CSA critical threshold of 70 mm 2 , have significantly greater functional disability

  17. A documentation system for decommissioning of nuclear power plants

    International Nuclear Information System (INIS)

    Glock, H.J.; Mueller, F.; Schwarz, H.

    1984-01-01

    A NPP's life cycle from the beginning of planning to its complete dismantling will last about 80 to 100 years. For this long time a documentation system has to be kept in stable working condition which provides access to an information base including 1.5 to 2 million pages and 200 to 250 thousand engineering drawings. As an appropriate base the documentation system IFODOK is proposed which is supported by computer and data base management software. In cooperation with NPP operating people a ground level thesaurus has been developed which is structured according to the rules of INFODOK's documentation language. The form of the information units which INFODOK maintains has been adapted to the requirements of KKW documentation and the related data record is described. Within a layer model the requirements to the software resulting from the demanded performance of the system are explained. The model also describes the interfaces between the substantial system components (application programs, data base management system, operating system) as well as within the different layers. The requirements which the system's hardware has to meet are described functionally and quantitatively in details. The application program' components have been extended by some functions. An automatic microfilm storage and retrieval system which may be integrated to the overall system and coupled to the computer by an interface is specified. The organization of the computer assisted documentation process including the required backup and refreshment procedures is described in its basic characteristics. This description of an DP system's prototype presents the base for the application of INFODOK to the documentation of NPP's information bases during their whole life time

  18. Automated 741 document preparation: Oak Ridge National Laboratory's Automated Safeguards Information System (OASIS)

    International Nuclear Information System (INIS)

    Austin, H.C.; Gray, L.M.

    1982-01-01

    OASIS has been providing for Oak Ridge National Laboratory's total safeguards needs since being place on line in April 1980. The system supports near real-time nuclear materials safeguards and accountability control. The original design of OASIS called for an automated facsimile of a 741 document to be prepared as a functional by-product of updating the inventory. An attempt was made to utilize, intact, DOE-Albuquerque's automated 741 system to generate the facsimile; however, the five page document produced proved too cumbersome. Albuquerque's programs were modified to print an original 741 document utilizing standard DOE/NRC 741 forms. It is felt that the best features of both the automated and manually generated 741 documents have been incorporated. Automation of the source data for 741 shipping documents produces greater efficiency while reducing possible errors. Through utilization of the standard DOE/NRC form, continuity within the NMMSS system is maintained, thus minimizing the confusion and redundancy associated with facsimiles. OASIS now fulfills the original concept of near real-time accountability by furnishing a viable 741 document as a function of updating the inventory

  19. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    GLASSCOCK, J.A.

    2000-01-27

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

  20. Web document engineering

    International Nuclear Information System (INIS)

    White, B.

    1996-05-01

    This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

  1. Formalisation for decision support in anaesthesiology

    NARCIS (Netherlands)

    Renardel de Lavalette, G R; Groenboom, R.; Rotterdam, E; van Harmelen, F; ten Teije, A; de Geus, F.

    1997-01-01

    This paper reports on research for decision support for anaesthesiologists at the University Hospital in Groningen, the Netherlands. Based on CAROLA, an existing automated operation documentation system, we designed a support environment that will assist in real-time diagnosis. The core of the work

  2. Monitored Retrievable Storage System Requirements Document. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design.

  3. FY 1987 program summary document: Office of Defense Waste and Transportation Management

    International Nuclear Information System (INIS)

    1987-04-01

    This document describes the Office of Defense Waste and Transportation Management (DWTM) Program as supported by the President's Fiscal Year (FY) 1987 Budget Request to Congress. It specifically addresses the program's organization, objectives, strategies, and plans for FY 1987

  4. The ecology and evolution of temperature-dependent reaction norms for sex determination in reptiles: a mechanistic conceptual model.

    Science.gov (United States)

    Pezaro, Nadav; Doody, J Sean; Thompson, Michael B

    2017-08-01

    Sex-determining mechanisms are broadly categorised as being based on either genetic or environmental factors. Vertebrate sex determination exhibits remarkable diversity but displays distinct phylogenetic patterns. While all eutherian mammals possess XY male heterogamety and female heterogamety (ZW) is ubiquitous in birds, poikilothermic vertebrates (fish, amphibians and reptiles) exhibit multiple genetic sex-determination (GSD) systems as well as environmental sex determination (ESD). Temperature is the factor controlling ESD in reptiles and temperature-dependent sex determination (TSD) in reptiles has become a focal point in the study of this phenomenon. Current patterns of climate change may cause detrimental skews in the population sex ratios of reptiles exhibiting TSD. Understanding the patterns of variation, both within and among populations and linking such patterns with the selection processes they are associated with, is the central challenge of research aimed at predicting the capacity of populations to adapt to novel conditions. Here we present a conceptual model that innovates by defining an individual reaction norm for sex determination as a range of incubation temperatures. By deconstructing individual reaction norms for TSD and revealing their underlying interacting elements, we offer a conceptual solution that explains how variation among individual reaction norms can be inferred from the pattern of population reaction norms. The model also links environmental variation with the different patterns of TSD and describes the processes from which they may arise. Specific climate scenarios are singled out as eco-evolutionary traps that may lead to demographic extinction or a transition to either male or female heterogametic GSD. We describe how the conceptual principles can be applied to interpret TSD data and to explain the adaptive capacity of TSD to climate change as well as its limits and the potential applications for conservation and management

  5. Acute total sleep deprivation potentiates amphetamine-induced locomotor-stimulant effects and behavioral sensitization in mice.

    Science.gov (United States)

    Saito, Luis P; Fukushiro, Daniela F; Hollais, André W; Mári-Kawamoto, Elisa; Costa, Jacqueline M; Berro, Laís F; Aramini, Tatiana C F; Wuo-Silva, Raphael; Andersen, Monica L; Tufik, Sergio; Frussa-Filho, Roberto

    2014-02-01

    It has been demonstrated that a prolonged period (48 h) of paradoxical sleep deprivation (PSD) potentiates amphetamine (AMP)-induced behavioral sensitization, an animal model of addiction-related neuroadaptations. In the present study, we examined the effects of an acute short-term deprivation of total sleep (TSD) (6h) on AMP-induced behavioral sensitization in mice and compared them to the effects of short-term PSD (6 h). Three-month-old male C57BL/6J mice underwent TSD (experiment 1-gentle handling method) or PSD (experiment 2-multiple platforms method) for 6 h. Immediately after the sleep deprivation period, mice were tested in the open field for 10 min under the effects of saline or 2.0 mg/kg AMP. Seven days later, to assess behavioral sensitization, all of the mice received a challenge injection of 2.0 mg/kg AMP and were tested in the open field for 10 min. Total, peripheral, and central locomotion, and grooming duration were measured. TSD, but not PSD, potentiated the hyperlocomotion induced by an acute injection of AMP and this effect was due to an increased locomotion in the central squares of the apparatus. Similarly, TSD facilitated the development of AMP-induced sensitization, but only in the central locomotion parameter. The data indicate that an acute period of TSD may exacerbate the behavioral effects of AMP in mice. Because sleep architecture is composed of paradoxical and slow wave sleep, and 6-h PSD had no effects on AMP-induced hyperlocomotion or sensitization, our data suggest that the deprivation of slow wave sleep plays a critical role in the mechanisms that underlie the potentiating effects of TSD on both the acute and sensitized addiction-related responses to AMP. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. The homeostatic and circadian sleep recovery responses after total sleep deprivation in mice.

    Science.gov (United States)

    Dispersyn, Garance; Sauvet, Fabien; Gomez-Merino, Danielle; Ciret, Sylvain; Drogou, Catherine; Leger, Damien; Gallopin, Thierry; Chennaoui, Mounir

    2017-10-01

    Many studies on sleep deprivation effects lack data regarding the recovery period. We investigated the 2-day homeostatic and circadian sleep recovery response to 24 h of total sleep deprivation (TSD) induced by brief rotation of an activity wheel. Eight mice were implanted with telemetry transmitters (DSI F40-EET) that recorded simultaneously their electroencephalography (EEG), locomotor activity and temperature during 24 h of baseline (BSL), TSD and 2 days of recovery (D1 and D2). In a second experiment, two groups of five non-implanted mice underwent TSD or ad libitum sleep, after which they were killed, adrenal glands were weighed and blood was collected for analysis of corticosterone concentration. During TSD mice were awake at least 97% of the time, with a consecutive sleep rebound during D1 that persisted during D2. This was characterized by increases of non-rapid eye movement (NREM) sleep (44.2 ± 6.9% for D1 and 43.0 ± 7.7% for D2 versus 33.8 ± 9.2% for BSL) and the relative delta band power (179.2 ± 34.4% for D1 and 81.9 ± 11.2% for D2). Greater NREM and REM sleep amounts were observed during the 'light' periods. Temperature and locomotor activity characteristics were unchanged during D1 and D2 versus BSL. In non-implanted mice, corticosterone levels as well as adrenal gland and overall body weights did not differ between TSD and ad libitum sleep groups. In conclusion, 24 h of TSD in an activity wheel without stress responses influence homeostatic sleep regulation with no effect on the circadian regulation over at least 2 days of recovery in mice. © 2017 European Sleep Research Society.

  7. Application of third order stochastic dominance algorithm in investments ranking

    Directory of Open Access Journals (Sweden)

    Lončar Sanja

    2012-01-01

    Full Text Available The paper presents the use of third order stochastic dominance in ranking Investment alternatives, using TSD algorithms (Levy, 2006for testing third order stochastic dominance. The main goal of using TSD rule is minimization of efficient investment set for investor with risk aversion, who prefers more money and likes positive skew ness.

  8. Documents preparation and review

    International Nuclear Information System (INIS)

    1999-01-01

    Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

  9. SiGesDoC: The CIEMAT corporate document and records management system. A tool for managing, saving and disseminating knowledge; SiGesDoC: El sistema de gestion documental corporativa del CIEMAT. Una herramienta para la gestion, preservacion y difusion del conocimiento

    Energy Technology Data Exchange (ETDEWEB)

    Martin Santamaria, E.; Gonzalez Giralda, C.; Bustelo, C.; Gorostiza, C.

    2008-07-01

    The need to manage, save and disseminate technical scientific knowledge as part of the technology transfer process requires the implementation of Corporate Document and Records Management Systems that support a cultural change in the management of documentation generated in organizations as a result of their research work. In the CIEMAT, most knowledge is developed in R and D projects led by scientists and technologists and managed by the research support personnel and, therefore, it is very important to efficiently manage and control the life cycles of these projects. This article describes the implementation of a corporate document and records management system in the CIEMAT. (Author)

  10. Documentation of Cultural Heritage Objects

    Directory of Open Access Journals (Sweden)

    Jon Grobovšek

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:The first and important phase of documentation of cultural heritage objects is to understand which objects need to be documented. The entire documentation process is determined by the characteristics and scope of the cultural heritage object. The next question to be considered is the expected outcome of the documentation process and the purpose for which it will be used. These two essential guidelines determine each stage of the documentation workflow: the choice of the most appropriate data capturing technology and data processing method, how detailed should the documentation be, what problems may occur, what the expected outcome is, what it will be used for, and the plan for storing data and results. Cultural heritage objects require diverse data capturing and data processing methods. It is important that even the first stages of raw data capturing are oriented towards the applicability of results. The selection of the appropriate working method can facilitate the data processing and the preparation of final documentation. Documentation of paintings requires different data capturing method than documentation of buildings or building areas. The purpose of documentation can also be the preservation of the contemporary cultural heritage to posterity or the basis for future projects and activities on threatened objects. Documentation procedures should be adapted to our needs and capabilities. Captured and unprocessed data are lost unless accompanied by additional analyses and interpretations. Information on tools, procedures and outcomes must be included into documentation. A thorough analysis of unprocessed but accessible documentation, if adequately stored and accompanied by additional information, enables us to gather useful data. In this way it is possible to upgrade the existing documentation and to avoid data duplication or unintentional misleading of users. The documentation should be archived safely and in a way to meet

  11. Mixing of incompatible materials in waste tanks technical basis document

    International Nuclear Information System (INIS)

    SANDGREN, K.R.

    2003-01-01

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process, the technical basis for assigning risk bins, and the controls selected for the mixing of incompatible materials representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSCs) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the FR-equency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report

  12. Multiple solutions and stability of the steady transonic small-disturbance equation

    Directory of Open Access Journals (Sweden)

    Ya Liu

    2017-09-01

    Full Text Available Numerical solutions of the steady transonic small-disturbance (TSD potential equation are computed using the conservative Murman−Cole scheme. Multiple solutions are discovered and mapped out for the Mach number range at zero angle of attack and the angle of attack range at Mach number 0.85 for the NACA 0012 airfoil. We present a linear stability analysis method by directly assembling and evaluating the Jacobian matrix of the nonlinear finite-difference equation of the TSD equation. The stability of all the discovered multiple solutions are then determined by the proposed eigen analysis. The relation of stability to convergence of the iterative method for solving the TSD equation is discussed. Computations and the stability analysis demonstrate the possibility of eliminating the multiple solutions and stabilizing the remaining unique solution by adding a sufficiently long splitter plate downstream the airfoil trailing edge. Finally, instability of the solution of the TSD equation is shown to be closely connected to the onset of transonic buffet by comparing with experimental data.

  13. A pilot study testing a natural and a synthetic Molluscicide for controlling invasive apple snails (Pomacea maculata)

    Science.gov (United States)

    Olivier, Heather M.; Jenkins, Jill A.; Berhow, Mark; Carter, Jacoby

    2016-01-01

    Pomacea maculata (formerly P. insularum), an apple snail native to South America, was discovered in Louisiana in 2008. These snails strip vegetation, reproduce at tremendous rates, and have reduced rice production and caused ecosystem changes in Asia. In this pilot study snails were exposed to two molluscicides, a tea (Camellia sinensis) seed derivative (TSD) or niclosamide monohydrate (Pestanal®, 2′,5-dichloro-4′-nitrosalicylanilide, CAS #73360-56-2). Mortality was recorded after exposure to high or low concentrations (0.03 and 0.015 g/L for TSD, 1.3 and 0.13 mg/L for niclosamide). The TSD induced 100 % mortality at both concentrations. Niclosamide caused 100 % and 17 % mortality at high and low concentrations respectively. These molluscicides were also tested on potential biocontrol agents, the red swamp crayfish (Procambarus clarkii) and redear sunfish (Lepomis microlophus). No crayfish mortalities occurred at either concentration for either chemical, but sunfish experienced 100 % mortality with TSD (0.03 g/L), and 21 % mortality with niclosamide (0.13 mg/L).

  14. Documentation: Records and Reports.

    Science.gov (United States)

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  15. Advanced decision support for winter road maintenance

    Science.gov (United States)

    2008-01-01

    This document provides an overview of the Federal Highway Administration's winter Maintenance Decision Support System (MDSS). The MDSS is a decision support tool that has the ability to provide weather predictions focused toward the road surface. The...

  16. First Evidence for the Wobbling Mode in A Triaxial Superdeformed Odd-A Nucleus

    International Nuclear Information System (INIS)

    Hamamoto, I.; Odegaerd, S.W.; Hagemann, G.B.

    2001-01-01

    The wobbling mode is uniquely related to rotation of a triaxial body. The Lu-Hf isotopes with N ∼ 94 provides a possible region of nuclei with pronounced triaxiality. We have investigated 163 Lu through the fusion- evaporation reaction 139 La( 29 Si,5n) 163 Lu with a beam energy of 152 MeV. The electromagnetic properties of several connecting transitions between two presumably Triaxial, Super Deformed (TSD) bands have been studied. New particle-rotor calculations in which an aligned i 13/2 proton is coupled to a ''wobbling'' core are presented and evidence for the assignment of the excited TSD band as a wobbling mode built on the yrast TSD band in 163 Lu is given. (author)

  17. Guidance and Control Software Project Data - Volume 4: Configuration Management and Quality Assurance Documents

    Science.gov (United States)

    Hayhurst, Kelly J. (Editor)

    2008-01-01

    The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes configuration management and quality assurance documents from the GCS project. Volume 4 contains six appendices: A. Software Accomplishment Summary for the Guidance and Control Software Project; B. Software Configuration Index for the Guidance and Control Software Project; C. Configuration Management Records for the Guidance and Control Software Project; D. Software Quality Assurance Records for the Guidance and Control Software Project; E. Problem Report for the Pluto Implementation of the Guidance and Control Software Project; and F. Support Documentation Change Reports for the Guidance and Control Software Project.

  18. Idaho National Laboratory Ten-Year Site Plan Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Not Listed

    2012-03-01

    This document describes the currently active and proposed infrastructure projects listed in Appendix B of the Idaho National Laboratory 2013-2022 Ten Year Site Plan (DOE/ID-11449). It was produced in accordance with Contract Data Requirements List I.06. The projects delineated in this document support infrastructure needs at INL's Research and Education Campus, Materials and Fuels Complex, Advanced Test Reactor Complex and the greater site-wide area. The projects provide critical infrastructure needed to meet current and future INL opereational and research needs. Execution of these projects will restore, rebuild, and revitalize INL's physical infrastructure; enhance program execution, and make a significant contribution toward reducing complex-wide deferred maintenance.

  19. Instructions for submittal and control of FFTF design documents and design related documentation

    International Nuclear Information System (INIS)

    Grush, R.E.

    1976-10-01

    This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

  20. Methods Used to Document Procedural Fidelity in School-Based Intervention Research

    Science.gov (United States)

    Barnett, David; Hawkins, Renee; McCoy, Dacia; Wahl, Elaine; Shier, Ashley; Denune, Hilary; Kimener, Lauren

    2014-01-01

    There has been a paucity of guidance on the methodological details needed for measuring and sampling the independent variable or actual intervention occurrences in research and practice. Furthermore, the planning and support necessary to document the independent variable in both circumstances may be considerable. The current study extends prior…

  1. Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

    Science.gov (United States)

    Girill, T. R.

    1991-01-01

    This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

  2. Documentation of delirium in the VA electronic health record

    Science.gov (United States)

    2014-01-01

    Background Delirium is a life-threatening, clinical syndrome common among the elderly and hospitalized patients. Delirium is under-recognized and misdiagnosed, complicating efforts to study the epidemiology and construct appropriate decision support to improve patient care. This study was primarily conducted to realize how providers documented confirmed cases of delirium in electronic health records as a preliminary step for using computerized methods to identify patients with delirium from electronic health records. Methods The Mental Health Consult (MHC) team reported cases of delirium to the study team during a 6-month study period (December 1, 2009 - May 31, 2010). A chart extraction tool was developed to abstract documentation of diagnosis, signs and symptoms and known risk factors of delirium. A nurse practitioner, and a clinical pharmacist independently reviewed clinical notes during each patients hospital stay to determine if delirium and or sign and symptoms of delirium were documented. Results The MHC team reported 25 cases of delirium. When excluding MHC team notes, delirium was documented for 5 of the 25 patients (one reported case in a physician’s note, four in discharge summaries). Delirium was ICD-9 Coded for 7 of the 25 cases. Signs and symptoms associated with delirium were characterized in 8 physician notes, 11 discharge summaries, and 14 nursing notes, accounting for 16 of the 25 cases with identified delirium. Conclusions Documentation of delirium is highly inconsistent even with a confirmed diagnosis. Hence, efforts to use existing data to precisely estimate the prevalence of delirium or to conduct epidemiological studies based on medical records will be challenging. PMID:24708799

  3. Background information document to support NESHAPS rulemaking on nuclear power reactors. Draft report

    International Nuclear Information System (INIS)

    Colli, A.; Conklin, C.; Hoffmeyer, D.

    1991-08-01

    The purpose of this Background Information Document (BID) is to present information relevant to the Administrator of the Environmental Protection Agency's (EPA) reconsideration of the need for a NESHAP to control radionuclides emitted to the air from commercial nuclear power reactors. The BID presents information on the relevant portions of the regulatory framework that NRC has implemented for nuclear power plant licensees, under the authority of the Atomic Energy Act, as amended, to protect the public's health and safety. To provide context, it summarizes the rulemaking history for Subpart I. It then describes NRC's regulatory program for routine atmospheric emissions of radionuclides and evaluates the doses caused by actual airborne emissions from nuclear power plants, including releases resulting from anticipated operational occurrences

  4. Computer-Supported Information Systems.

    Science.gov (United States)

    Mayhew, William H.

    1983-01-01

    The planning and implementation of a computerized management information system at a fictional small college is described. Nine key points are made regarding department involvement, centralization, gradual program implementation, lowering costs, system documentation, and upper-level administrative support. (MSE)

  5. Synthesis document on the long life behavior of packages: reference operational document ''CSD-C'' 2004

    International Nuclear Information System (INIS)

    Helie, M.

    2004-12-01

    This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of standard packages of compacted wastes is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the packages alteration by the water and the associated radionuclide release. (A.L.B.)

  6. Model documentation: Renewable Fuels Module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it related to the production of the 1994 Annual Energy Outlook (AEO94) forecasts. The report catalogues and describes modeling assumptions, computational methodologies, data inputs, and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described. This documentation report serves two purposes. First, it is a reference document for model analysts, model users, and the public interested in the construction and application of the RFM. Second, it meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. The RFM consists of six analytical submodules that represent each of the major renewable energy resources -- wood, municipal solid waste (MSW), solar energy, wind energy, geothermal energy, and alcohol fuels. Of these six, four are documented in the following chapters: municipal solid waste, wind, solar and biofuels. Geothermal and wood are not currently working components of NEMS. The purpose of the RFM is to define the technological and cost characteristics of renewable energy technologies, and to pass these characteristics to other NEMS modules for the determination of mid-term forecasted renewable energy demand.

  7. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted.   CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat a...

  8. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natu...

  9. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natur...

  10. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of em¬pl...

  11. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and ...

  12. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the na...

  13. Code Verification Capabilities and Assessments in Support of ASC V&V Level 2 Milestone #6035

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Budzien, Joanne Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ferguson, Jim Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harwell, Megan Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hickmann, Kyle Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Israel, Daniel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Magrogan, William Richard III [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Srinivasan, Gowri [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Walter, Jr, John William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Woods, Charles Nathan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-26

    This document provides a summary of the code verification activities supporting the FY17 Level 2 V&V milestone entitled “Deliver a Capability for V&V Assessments of Code Implementations of Physics Models and Numerical Algorithms in Support of Future Predictive Capability Framework Pegposts.” The physics validation activities supporting this milestone are documented separately. The objectives of this portion of the milestone are: 1) Develop software tools to support code verification analysis; 2) Document standard definitions of code verification test problems; and 3) Perform code verification assessments (focusing on error behavior of algorithms). This report and a set of additional standalone documents serve as the compilation of results demonstrating accomplishment of these objectives.

  14. Nurses' Perceptions of Nursing Care Documentation in the Electronic Health Record

    Science.gov (United States)

    Jensen, Tracey A.

    2013-01-01

    Electronic health records (EHRs) will soon become the standard for documenting nursing care. The EHR holds the promise of rapid access to complete records of a patient's encounter with the healthcare system. It is the expectation that healthcare providers input essential data that communicates important patient information to support quality…

  15. Documentation of delirium in the VA electronic health record

    OpenAIRE

    Hope, Carol; Estrada, Nicollete; Weir, Charlene; Teng, Chia-Chen; Damal, Kavitha; Sauer, Brian C

    2014-01-01

    Background Delirium is a life-threatening, clinical syndrome common among the elderly and hospitalized patients. Delirium is under-recognized and misdiagnosed, complicating efforts to study the epidemiology and construct appropriate decision support to improve patient care. This study was primarily conducted to realize how providers documented confirmed cases of delirium in electronic health records as a preliminary step for using computerized methods to identify patients with delirium from e...

  16. Documentation and billing for services provided by midwives teaching obstetrics and gynecology residents and medical students.

    Science.gov (United States)

    Wilson-Liverman, Angela; Slager, Joan; Wage, Deborah

    2009-01-01

    Certified nurse-midwives are teaching obstetrics and gynecology residents and medical students in major academic institutions across the United States. In these instances, the ability to appropriately document services rendered to support a billable service is paramount. This article explains the difference in requirements for midwives' documentation when working with residents compared with documentation required of an attending obstetrician-gynecologist. It also reviews the teaching physician guidelines developed by the Centers for Medicare and Medicaid Services (CMS) as well as current evaluation and management documentation requirements. Several examples of documentation are provided, as are suggestions for enhancement and simplification of the guidelines to include midwives. An important point to remember is that the CMS rules do not prohibit a certified nurse-midwife from teaching a resident.

  17. SRS ECOLOGY ENVIRONMENTAL INFORMATION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    Wike, L; Doug Martin, D; Eric Nelson, E; Nancy Halverson, N; John Mayer, J; Michael Paller, M; Rodney Riley, R; Michael Serrato, M

    2006-03-01

    The SRS Ecology Environmental Information Document (EEID) provides a source of information on the ecology of Savannah River Site (SRS). The SRS is a U.S. Department of Energy (DOE)--owned property on the upper Atlantic Coastal Plain of South Carolina, centered approximately 40 kilometers (25 miles) southeast of Augusta, Georgia. The entire site was designated a National Environmental Research Park in 1972 by the Atomic Energy Commission, the predecessor of DOE. This document summarizes and synthesizes ecological research and monitoring conducted on the three main types of ecosystems found at SRS: terrestrial, wetland and aquatic. It also summarizes the available information on the threatened and endangered species found on the Savannah River Site. SRS is located along the Savannah River and encompasses an area of 80,267 hectares (310 square miles) in three South Carolina counties. It contains diverse habitats, flora, and fauna. Habitats include upland terrestrial areas, wetlands, streams, reservoirs, and the adjacent Savannah River. These diverse habitats support a variety of plants and animals, including many commercially or recreationally valuable species and several rare, threatened, or endangered species. Soils are the basic terrestrial resource, influencing the development of terrestrial biological communities. Many different soils exist on the SRS, from hydric to well-drained, and from sand to clay. In general, SRS soils are predominantly well-drained loamy sands.

  18. 1995 Solid Waste 30-year volume summary

    International Nuclear Information System (INIS)

    Valero, O.J.; DeForest, T.J.; Templeton, K.J.

    1995-06-01

    This document, prepared by Pacific Northwest Laboratory (PNL) under the direction of Westinghouse Hanford Company (WHC), provides a description of the annual low-level mixed waste (LLMW) and transuranic/transuranic mixed solid waste (TRU-TRUM) volumes expected to be managed by Hanford's Solid Waste Central Waste Complex (CWC) over the next 30 years. The waste generation sources and waste categories are also described. This document is intended to be used as a reference for short- and long-term planning of the Hanford treatment, storage, and disposal (TSD) activities over the next several decades. By estimating the waste volumes that will be generated in the future, facility planners can determine the timing of key waste management activities, evaluate alternative treatment strategies, and plan storage and disposal capacities. In addition, this document can be used by other waste sites and the general public to gain a better understanding of the types and volumes of waste that will be managed at Hanford

  19. 1995 Solid Waste 30-year volume summary

    Energy Technology Data Exchange (ETDEWEB)

    Valero, O.J. [Westinghouse Hanford Co., Richland, WA (United States); DeForest, T.J.; Templeton, K.J. [Pacific Northwest Lab., Richland, WA (United States)

    1995-06-01

    This document, prepared by Pacific Northwest Laboratory (PNL) under the direction of Westinghouse Hanford Company (WHC), provides a description of the annual low-level mixed waste (LLMW) and transuranic/transuranic mixed solid waste (TRU-TRUM) volumes expected to be managed by Hanford`s Solid Waste Central Waste Complex (CWC) over the next 30 years. The waste generation sources and waste categories are also described. This document is intended to be used as a reference for short- and long-term planning of the Hanford treatment, storage, and disposal (TSD) activities over the next several decades. By estimating the waste volumes that will be generated in the future, facility planners can determine the timing of key waste management activities, evaluate alternative treatment strategies, and plan storage and disposal capacities. In addition, this document can be used by other waste sites and the general public to gain a better understanding of the types and volumes of waste that will be managed at Hanford.

  20. Embedding the shapes of regions of interest into a Clinical Document Architecture document.

    Science.gov (United States)

    Minh, Nguyen Hai; Yi, Byoung-Kee; Kim, Il Kon; Song, Joon Hyun; Binh, Pham Viet

    2015-03-01

    Sharing a medical image visually annotated by a region of interest with a remotely located specialist for consultation is a good practice. It may, however, require a special-purpose (and most likely expensive) system to send and view them, which is an unfeasible solution in developing countries such as Vietnam. In this study, we design and implement interoperable methods based on the HL7 Clinical Document Architecture and the eXtensible Markup Language Stylesheet Language for Transformation standards to seamlessly exchange and visually present the shapes of regions of interest using web browsers. We also propose a new integration architecture for a Clinical Document Architecture generator that enables embedding of regions of interest and simultaneous auto-generation of corresponding style sheets. Using the Clinical Document Architecture document and style sheet, a sender can transmit clinical documents and medical images together with coordinate values of regions of interest to recipients. Recipients can easily view the documents and display embedded regions of interest by rendering them in their web browser of choice. © The Author(s) 2014.