Screening for viral extraneous agents in live-attenuated avian vaccines by using a microbial microarray and sequencing

DEFF Research Database (Denmark)

Olesen, Majken Lindholm; Jørgensen, Lotte Leick; Blixenkrone-Møller, Merete

2018-01-01

The absence of extraneous agents (EA) in the raw material used for production and in finished products is one of the principal safety elements related to all medicinal products of biological origin, such as live-attenuated vaccines. The aim of this study was to investigate the applicability...... of the Lawrence Livermore Microbial detection array version 2 (LLMDAv2) combined with whole genome amplification and sequencing for screening for viral EAs in live-attenuated vaccines and specific pathogen-free (SPF) eggs.We detected positive microarray signals for avian endogenous retrovirus EAV-HP and several...... viruses belonging to the Alpharetrovirus genus in all analyzed vaccines and SPF eggs. We used a microarray probe mapping approach to evaluate the presence of intact retroviral genomes, which in addition to PCR analysis revealed that several of the positive microarray signals were most likely due to cross...

Environmental assessment of passenger transportation should include infrastructure and supply chains

International Nuclear Information System (INIS)

Chester, Mikhail V; Horvath, Arpad

2009-01-01

To appropriately mitigate environmental impacts from transportation, it is necessary for decision makers to consider the life-cycle energy use and emissions. Most current decision-making relies on analysis at the tailpipe, ignoring vehicle production, infrastructure provision, and fuel production required for support. We present results of a comprehensive life-cycle energy, greenhouse gas emissions, and selected criteria air pollutant emissions inventory for automobiles, buses, trains, and airplanes in the US, including vehicles, infrastructure, fuel production, and supply chains. We find that total life-cycle energy inputs and greenhouse gas emissions contribute an additional 63% for onroad, 155% for rail, and 31% for air systems over vehicle tailpipe operation. Inventorying criteria air pollutants shows that vehicle non-operational components often dominate total emissions. Life-cycle criteria air pollutant emissions are between 1.1 and 800 times larger than vehicle operation. Ranges in passenger occupancy can easily change the relative performance of modes.

North american natural gas supply forecast: the Hubbert method including the effects of institutions

International Nuclear Information System (INIS)

Reynolds, D. B.; Kolodziej, M.

2009-01-01

In this article, the U.S. and southern Canadian natural gas supply market is considered. An important model for oil and natural gas supply is the Hubbert curve. Not all regions of the world are producing oil or natural gas following a Hubbert curve, even when price and market conditions are accounted for. One reason is that institutions are affecting supply. We investigate the possible effects of oil and gas market institutions in North America on natural gas supply. A multi-cycle Hubbert curve with inflection points similar to the Soviet Union's oil production multi-cycle Hubbert curve is used to determine North American natural gas discovery rates and to analyze how market specific institutions caused the inflection points. In addition, we analyze the latest shale natural gas projections critically. While currently, unconventional resources of natural gas suggest that North American natural gas production will increase without bound, the model here suggests a peak in North American natural gas supplies could happen in 2013. (author)

In Respect to the Cognitive Load Theory: Adjusting Instructional Guidance with Student Expertise.

Science.gov (United States)

Schilling, Jim

2017-01-01

The amount of guidance supplied by educators to students in allied health programs is a factor in student learning. According to the cognitive load theory of learning, without adequate instructional support, novice learners will be overwhelmed and unable to store information, while unnecessary guidance supplied to advanced students will cause extraneous cognitive load on the working memory system. Adjusting instructional guidance for students according to their level of expertise to minimize extraneous cognitive load and optimize working memory storage capacity will enhance learning effectiveness. Novice students presented with complex subject matter require significant guidance during the initial stages, using strategies such as worked examples. As students comprehend information, instructional guidance needs to gradually fade to avoid elevated extraneous cognitive load from the expertise reversal effect. An instructional strategy that utilizes a systemic (fixed) or adjustable (adaptive) tapering of guidance to students in allied health programs depending on their expertise will optimize learning capability.

La extraña idea del desarrollo. Genealogía de un concepto

Directory of Open Access Journals (Sweden)

Carlos Eduardo Maldonado

2017-01-01

Full Text Available Este artículo elabora una genealogía del concepto de desarrollo. Formulado originalmente por R. Prebisch (1950, el con- cepto sufre varias traducciones, extensiones y modi caciones que terminan asimilándolo a una idea perfectamente distinta. El sentido y el contexto originarios terminan transformándose. Así, el desarrollo termina siendo una apología del capitalismo. Después de una introducción histórica y cientí ca, el artículo desarrolla cuatro argumentos, así: el modelo de desarrollo es una idea extraña; esta idea se ve ampliada y extendida en términos de sostenibilidad; varias críticas, sin embargo, emergen y se ha- cen necesarias; consiguientemente, se hace posible e imperativo un modelo alternativo al desarrollo. Cada una de las secciones mencionadas son justi cadas en cada paso. Al nal se extraen algunas conclusiones, y el artículo termina con una idea fuerte que vincula bancarización y control ciudadano. Palabras clave: Historia de la economía, filosofía de la economía, capitalismo, economía política Abstract This paper carries out a genealogy of the concept of development. Originally stated out by R. Prebisch (1950, the concept su ers a number of translations, extension, and changes that end up with a quite di erent idea than it was originally thought. Both the meaning and framework end up being radically changed. us, development ends as an apology to capitalism. A er a short historical and philosophical introduction, this paper develops four arguments, as follows: the model of economic de- velopment is a weird idea; such an idea is both extended and widened in terms of sustainability; a number of critiques merge, though, that are necessary and feasible; therea er, an alternative model of development becomes at the same time possible and compulsory. Each one of the mentioned paragraphs are justi ed in due time. At the end some conclusions are drawn, ad the paper ends with a string idea that

Decision-Making for Supply Chain Integration Supply Chain Integration

CERN Document Server

Lettice, Fiona; Durowoju, Olatunde

2012-01-01

Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

Supply-Chain Optimization Template

Science.gov (United States)

Quiett, William F.; Sealing, Scott L.

2009-01-01

The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

Petroleum supply monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Laser power supply

International Nuclear Information System (INIS)

Bernstein, D.

1975-01-01

The laser power supply includes a regulator which has a high voltage control loop based on a linear approximation of a laser tube negative resistance characteristic. The regulator has independent control loops for laser current and power supply high voltage

Cost of Oil and Biomass Supply Shocks under Different Biofuel Supply Chain Configurations

Energy Technology Data Exchange (ETDEWEB)

Uria Martinez, Rocio [ORNL; Leiby, Paul Newsome [ORNL; Brown, Maxwell L. [National Renewable Energy Laboratory (NREL)

2018-04-01

This analysis estimates the cost of selected oil and biomass supply shocks for producers and consumers in the light-duty vehicle fuel market under various supply chain configurations using a mathematical programing model, BioTrans. The supply chain configurations differ by whether they include selected flexibility levers: multi-feedstock biorefineries; advanced biomass logistics; and the ability to adjust ethanol content of low-ethanol fuel blends, from E10 to E15 or E05. The simulated scenarios explore market responses to supply shocks including substitution between gasoline and ethanol, substitution between different sources of ethanol supply, biorefinery capacity additions or idling, and price adjustments. Welfare effects for the various market participants represented in BioTrans are summarized into a net shock cost measure. As oil accounts for a larger fraction of fuel by volume, its supply shocks are costlier than biomass supply shocks. Corn availability and the high cost of adding biorefinery capacity limit increases in ethanol use during gasoline price spikes. During shocks that imply sudden decreases in the price of gasoline, the renewable fuel standard (RFS) biofuel blending mandate limits the extent to which flexibility can be exercised to reduce ethanol use. The selected flexibility levers are most useful in response to cellulosic biomass supply shocks.

Contract Coordination in Dual Sourcing Supply Chain under Supply Disruption Risk

Directory of Open Access Journals (Sweden)

Tong Shu

2015-01-01

Full Text Available This paper explores a coordination model for a three-echelon supply chain including two different manufacturers, one distributer and one retailer via the combined option and back contracts. And one manufacturer provides the high wholesale price with low supply disruption risk and the other is completely the opposite. This differs from the previous supply chain coordination model. Firstly, supply disruption is added to the three-echelon supply chain. Secondly, considering the coordination of the supply chain, we deploy the combined option and back contracts which are seldom used in the previous study. Furthermore, it is interesting that supply disruption risk and buyback factor do not affect the distributor’s order quantity from the manufacturer who has low product price and unreliable operating ability, while the order quantity increases with the rise of option premium and option strike price. The distributor’s order quantity from the manufacturer, which has high product price and reliable operating ability, increases with the rise of supply disruption risk but decreases when the buyback factor, option premium, and option strike price decrease.

Petroleum Supply Monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

AC power supply systems

International Nuclear Information System (INIS)

Law, H.

1987-01-01

An ac power supply system includes a rectifier fed by a normal ac supply, and an inverter connected to the rectifier by a dc link, the inverter being effective to invert the dc output of the receiver at a required frequency to provide an ac output. A dc backup power supply of lower voltage than the normal dc output of the rectifier is connected across the dc link such that the ac output of the rectifier is derived from the backup supply if the voltage of the output of the inverter falls below that of the backup supply. The dc backup power may be derived from a backup ac supply. Use in pumping coolant in nuclear reactor is envisaged. (author)

Can We Defend the Defense Supply Chain Lessons Learned from Industry Leaders in Supply Chain Management

Science.gov (United States)

2018-03-01

Simpson, “Tim Cook: The ‘Cool Customer ’ Behind Apple’s Supply Chain Success,” Supply Management , January 18, 2016, https://www.cips.org/supply... management /analysis/2016/february/tim- cook-the-cool- customer -behind-apples-supply-chain-success/. 13 Kif Leswing, “Apples ‘Shreds” Old iPhones to Prevent...chain, including products, services, information, finances, demand, relationships , and risks. In a more complete definition, supply chain management

Prize something, including quality. The price of supply interruption. On the search for φ. Technical report

International Nuclear Information System (INIS)

Baarsma, B.E.; Berkhout, P.H.G.; Hop, J.P.

2004-04-01

The Dutch Office of Energy Regulation (DTe) plans to adjust the present regulations with regard to regional electricity network companies. In 2002 an integrated model for pricing and quality regulations is drafted, which is expected to be implemented in 2005. This report serves as input for such a model. Quality is defined in terms of electricity supply disruptions. The aim of the study on the title subject is to determine prices for different types of power supply disruptions. The study is based on a survey among 12,400 households and nearly 2,500 small and medium-sized businesses in the Netherlands [nl

Sustainable Supply Chain Design

DEFF Research Database (Denmark)

Bals, Lydia; Tate, Wendy

A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

Security management of water supply

Directory of Open Access Journals (Sweden)

Tchórzewska-Cieślak Barbara

2017-03-01

Full Text Available The main aim of this work is to present operational problems concerning the safety of the water supply and the procedures for risk management systems functioning public water supply (CWSS and including methods of hazard identification and risk assessment. Developed a problem analysis and risk assessment, including procedures called. WSP, which is recommended by the World Health Organization (WHO as a tool for comprehensive security management of water supply from source to consumer. Water safety plan is a key element of the strategy for prevention of adverse events in CWSS.

LCA of Drinking Water Supply

DEFF Research Database (Denmark)

Godskesen, Berit; Meron, Noa; Rygaard, Martin

2018-01-01

Water supplies around the globe are growing complex and include more intense treatment methods than just decades ago. Now, desalination of seawater and wastewater reuse for both non-potable and potable water supply have become common practice in many places. LCA has been used to assess...... the potentials and reveal hotspots among the possible technologies and scenarios for water supplies of the future. LCA studies have been used to support decisions in the planning of urban water systems and some important findings include documentation of reduced environmental impact from desalination of brackish...... water over sea water, the significant impacts from changed drinking water quality and reduced environmental burden from wastewater reuse instead of desalination. Some of the main challenges in conducting LCAs of water supply systems are their complexity and diversity, requiring very large data...

WATER SUPPLY ANALYSIS

International Nuclear Information System (INIS)

Clark, R.D.

1996-01-01

This analysis defines and evaluates the surface water supply system from the existing J-13 well to the North Portal. This system includes the pipe running from J-13 to a proposed Booster Pump Station at the intersection of H Road and the North Portal access road. Contained herein is an analysis of the proposed Booster Pump Station with a brief description of the system that could be installed to the South Portal and the optional shaft. The tanks that supply the water to the North Portal are sized, and the supply system to the North Portal facilities and up to Topopah Spring North Ramp is defined

Petroleum supply monthly, April 1990

Energy Technology Data Exchange (ETDEWEB)

None

1990-06-26

The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

Estimating Swedish biomass energy supply

International Nuclear Information System (INIS)

Johansson, J.; Lundqvist, U.

1999-01-01

Biomass is suggested to supply an increasing amount of energy in Sweden. There have been several studies estimating the potential supply of biomass energy, including that of the Swedish Energy Commission in 1995. The Energy Commission based its estimates of biomass supply on five other analyses which presented a wide variation in estimated future supply, in large part due to differing assumptions regarding important factors. In this paper, these studies are assessed, and the estimated potential biomass energy supplies are discusses regarding prices, technical progress and energy policy. The supply of logging residues depends on the demand for wood products and is limited by ecological, technological, and economic restrictions. The supply of stemwood from early thinning for energy and of straw from cereal and oil seed production is mainly dependent upon economic considerations. One major factor for the supply of willow and reed canary grass is the size of arable land projected to be not needed for food and fodder production. Future supply of biomass energy depends on energy prices and technical progress, both of which are driven by energy policy priorities. Biomass energy has to compete with other energy sources as well as with alternative uses of biomass such as forest products and food production. Technical progress may decrease the costs of biomass energy and thus increase the competitiveness. Economic instruments, including carbon taxes and subsidies, and allocation of research and development resources, are driven by energy policy goals and can change the competitiveness of biomass energy

The Financial Supply Chain Management: a New Solution for Supply Chain Resilience

Directory of Open Access Journals (Sweden)

Virgil Popa

2013-02-01

Full Text Available In the present article, the author aims to find solutions to optimize the supply chain for the cash flow – a flow of products reversed from the physical one and the two-ways flow of information. In the last 15-20 years, academics and practitioners were oriented towards increasing the speed, cost reduction on supply chain material’s flow, oriented towards 3RP (3 Resource Planning logistics solutions and management solutions such as outsourcing or collaborative management. In terms of information flow, there has been a real revolution with the rise of the Internet and information technology standards introduced by the VICS (Voluntary Interindustry Commerce Standards, CSCMP (Council of Supply Chain Management Professionals, SCC (Supply Chain Council şi ECR Europe (Efficient Consumer Respons. The objective of this paper is to identify new ways of working together on supply chain financial flows. Methods used are the documentation in the literature and the practices of transnational companies under recession. Results refer to the identification of new solutions such as reverse factoring. A comparative analysis regarding the european and national regulations gets us to the conclusion that Romania is still tributary to traditional commercial credit. We propose that the Collaborative management, as a modus vivendi in a globalized and super computerized world, must be included within all Romanian organizations life, within the Supply Chain, but also those which are 3PL (Third Part Logistics and 4PL (Four Part Logistics organizations, where not only information services are included, but also financial services (banks and specialized financial institutions.

Petroleum supply monthly, April 1994

Energy Technology Data Exchange (ETDEWEB)

1994-04-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

Heavy oil supply economics and supply response to low oil prices

International Nuclear Information System (INIS)

Fisher, L.

1999-01-01

The dynamics of the heavy oil industry are examined, including prices, market demand, supply and supply costs. Price assumptions are provided for the reference case oil price (west Texas intermediate at Cushing). Supply cost methodology is explained. Capital and operating costs for various heavy oil and synthetic sources are derived from modeling results. The range of supply costs for heavy oil and bitumen from various sources, supply costs in terms of reference case market values and in terms of 1995-1996 average market values for Bow River crude, are derived. The CERI long term supply forecast model is explained. Western Canada upstream oil and gas cash flow and capital expenditures, eastern Canada exploration and expenditures by hydrocarbon type, and Canadian heavy oil and bitumen production based on reference case prices are estimated. Based on these projections the outlook for heavy oil at reference case prices for better than average quality resources is judged to be economic. Lower quality resources will require technology gains for successful commercialization. SAGD is a likely candidate in this respect. Again based on reference prices, production is forecast to decline by 100 Kb/d over the next five years. Diluent supply is considered to be adequate throughout the forecast period. As far as thermal bitumen is concerned, the growth could, in fact, exceed the projection, but if so, more upgrading will be required. 11 figs

Aggregate Supply and Potential Output

OpenAIRE

Razin, Assaf

2004-01-01

The New-Keynesian aggregate supply derives from micro-foundations an inflation-dynamics model very much like the tradition in the monetary literature. Inflation is primarily affected by: (i) economic slack; (ii) expectations; (iii) supply shocks; and (iv) inflation persistence. This paper extends the New Keynesian aggregate supply relationship to include also fluctuations in potential output, as an additional determinant of the relationship. Implications for monetary rules and to the estimati...

Achieving Supply Chain Integration within Construction Industry

Directory of Open Access Journals (Sweden)

Peter McDermotti

2012-11-01

Full Text Available The main driver behind the adoption of supply chain management (SCM philosophy into the construction industry was the successes within other industry sectors. SCM can be defined as network of different organisations, linked upstream and downstream in a chain, aiming to produce quality and value in the services and products for the end consumers through integrated processes and activities. In order to achieve the optimised level of integration of the whole supply chain, the industry has responded in various forms. This paper will discuss different initiatives by the researchers,construction industry,and the UK government in order to achieve optimal level of supply chain integration. This paper will discuss the concept of aggregation,and also look at other supply chain integration related concepts including client-led supply chain, knowledge about the whole supply chain, effects of procurement on integration of supply chain, etc. The paper will give a brief overview and initial findings of a project undertaken by the authors, and also include examples from the UK construction industry on bundling of the supply and demand.

Supply system with microprocessor control for electron gun

International Nuclear Information System (INIS)

Duplin, N.I.; Sergeev, N.N.

1988-01-01

Precision supply system for electron gun used in Auger-spectrometer is described. The supply system consists of control and high-voltage parts, made as separate units. Supply high-voltage unit includes system supply module, filament module to supply electron gun cathode and 6 high-volt modules to supply accelerating, modulating and three focusing electrodes of the gun. High-voltage modules have the following characteristics: U-(100-1000)V output voltage, 5x10 -5 U stability, 10 -5 xU pulsation amplitude, J-(0-5)A filament current change range at 10 -4 xJ stability. Control unit including microprocessor, timer and storage devices forms control voltage for all modules and regulates voltage and current of filament at electrodes

Oil statistics 1976: supply and disposal

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

Summary tables are included for the period 1960 to 1976. The detailed tables for 1976 cover production, supply and disposal; supply and disposal by product; imports by sources; imports from member countries; exports by destination; exports to member countries; consumption by end-use sectors; and supply and disposal of finished products by country (1975 and 1976). (DLC)

Non-OPEC supply : delivering on growth

International Nuclear Information System (INIS)

Lynch, M.C.

2001-01-01

This PowerPoint slide show included several graphs depicting petroleum issues dealing with non-OPEC oil supply. A forecast for 2001 was included with particular focus on changes in non-OPEC supply and annual change in non-OPEC supply to 2005. The author described ways in which to judge oil supply forecasts. The driving factors for the first approach are: investment drilling, depletion, and other factors such as natural gas prices, labor relations, and weather. The second approach to forecasting oil supply is policy driven, as in the case of Mexico and Russia, maturity driven as in the case of the United States, North Sea and Canada, and lastly, it is inertia driven. It was noted that since most oil is from aging reservoirs, depletion drivers should be carefully considered, including different types of production, such as onshore, offshore and horizontal wells. The author concluded with his prediction that we can expect much more oil unless prices are weak. There will likely be more activity in the petroleum industry which will be good for the oil service industry. He also predicted improvements in productivity. 3 tabs., 12 figs

Supply chain strategies, issues and models

CERN Document Server

Ramanathan, Ramakrishnan

2014-01-01

In the 21st century, supply chain operations and relationships among supply chain partners have become highly challenging, necessitating new approaches, e.g., the development of new models. Supply Chain Strategies, Issues and Models discusses supply chain issues and models with examples from actual industrial cases. Expert authors with a wide spectrum of knowledge working in various areas of supply chain management from various geographical locations offer refreshing, novel and insightful ideas and address possible solutions using established theories and models. Supply Chain Strategies, Issues and Models features studies that have used mathematical modeling, statistical analyses and also descriptive qualitative studies. The chapters cover many relevant themes related to supply chains and logistics including supply chain complexity, information sharing, quality (six sigma), electronic Kanbans, inventory models, scheduling, purchasing and contracts. To facilitate easy reading, the chapters that deal with suppl...

Petroleum supply monthly, January 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-15

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Petroleum supply monthly, October 1993

Energy Technology Data Exchange (ETDEWEB)

1993-10-26

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Petroleum Supply Monthly, August 1990

Energy Technology Data Exchange (ETDEWEB)

1990-10-30

The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

Petroleum supply monthly, September 1991

Energy Technology Data Exchange (ETDEWEB)

1991-09-30

The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

The Functions of Sourcing Intermediaries in Global Supply Risk Management

DEFF Research Database (Denmark)

Vedel, Mette; Ellegaard, Chris

The aim of this work-in-progress paper is to uncover the supply risk management functions performed by sourcing intermediaries. The purchasing and supply chain management literature, including the part of it concerned with supply risk, pays little attention to sourcing intermediaries....... But the fields of marketing and international business have investigated the intermediary including its high supply risk reducing potentials, suggesting that this supply chain entity may be highly relevant to supply risk management. In order to get a better understanding of the supply risk reducing properties...... of sourcing intermediaries, we perform a study of the Danish clothing industry. The study incorporate interviews across a range of functions and companies in this industry including retailers, producers, suppliers, and various types of intermediaries. We contribute by coupling the supply risk management...

New remuneration models for electricity supply from autoproducers: Cost-orientated, including capacity charge, on a private-enterprise basis

International Nuclear Information System (INIS)

Zybell, G.

1995-01-01

Co-operation between industrial autoproducers and the public utilities has a long tradition in Germany. This is particularly the case in combined heat and power generation. In 1993 electricity supplied by third parties contributed with approximately 14% to electricity demand coverage. This is (as in Italy) the next highest proportion in the EU. In 1994 the industry's associations -BDI, VIK and VDEW - agreed upon new remuneration models for electricity supplied by combined heat and power stations and plants on the basis of renewable energies. Additionally, principles agreed upon in 1979 were further developed. (orig.) [de

Balancing the supply mix to meet tomorrow's energy needs

International Nuclear Information System (INIS)

Wiggin, M.

2004-01-01

This presentation emphasized the need to balance the power supply mix to ensure future energy needs. A balanced supply includes generation supply options that include renewable energy sources, natural gas, oil or coal. The role of combined heat and power (CHP) and district energy in this supply mix is considered to be a potential generation solution. The challenge facing Ontario's Independent Electricity Market Operator (IMO) is to balance supply and demand, phase out coal, promote renewables, diminish demand and determine the new role for natural gas. A graph by the National Energy Board depicting Canada's energy future and scenarios for supply and demand to 2025 indicates that gas yields from the Western Canada Sedimentary Basin are declining. It is expected that with growing demands for natural gas, prices will remain high and there will be a need for new generation capacity. The viable options for energy supply include a re-examination of the district energy advantage through industrial waste heat, biomass and other renewables, and the integration of industrial and community energy systems. Other options include the continued recognition of distributed generation in the form of combined heat and power. 4 figs

Supply chain dynamics in healthcare services.

Science.gov (United States)

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

Petroleum supply monthly, August 1994

Energy Technology Data Exchange (ETDEWEB)

1994-08-26

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

BEHAVIOURAL INSIGHTS INTO SUPPLY CHAIN RISK MANAGEMENT

OpenAIRE

Alexandra-Codruta Popescu (Bîzoi); Cristian-Gabriel Bîzoi

2015-01-01

Literature has focused largely on the field of supply chain risk management. Numerous risks occur within supply chain management. Until lately, behavioural risks (implying large amount of losses) have been neglected and considered not relevant. In this paper we provide an analysis of the importance of including behavioural research in logistics and supply chain risk management, what has been written so far and potential future research directions. Until now, literature on logistics and supply...

Task Experience as a Boundary Condition for the Negative Effects of Irrelevant Information on Learning

NARCIS (Netherlands)

G. Rop (Gertjan); M. van Wermeskerken (Margot); J.A. de Nooijer (Jacqueline); P.P.J.L. Verkoeijen (Peter); T.A.J.M. van Gog (Tamara)

2016-01-01

textabstractResearch on multimedia learning has shown that learning is hampered when a multimedia message includes extraneous information that is not relevant for the task, because processing the extraneous information uses up scarce attention and working memory resources. However, eye-tracking

Sourcing and pricing strategies for two retailers in a decentralized supply chain system under supply disruption

Directory of Open Access Journals (Sweden)

M.A. Azarmehr

2012-01-01

Full Text Available This paper presents the decentralized supply chain with two suppliers and two competing retailers. It also investigates the sourcing and pricing strategies of two retailers in a decentralized supply chain system under a supply disruption environment. These retailers face their individual stochastic demand markets; however, they compete with each other through a two-stage price and service operation. The interactive dynamics among retailers is characterized, including the existence and uniqueness of the Nash Equilibrium in service and price games demonstrated.

Finance and supply management project execution plan

Energy Technology Data Exchange (ETDEWEB)

BENNION, S.I.

1999-02-10

As a subproject of the HANDI 2000 project, the Finance and Supply Management system is intended to serve FDH and Project Hanford major subcontractor with financial processes including general ledger, project costing, budgeting, and accounts payable, and supply management process including purchasing, inventory and contracts management. Currently these functions are performed with numerous legacy information systems and suboptimized processes.

Controlled power supply for isotopes separator

International Nuclear Information System (INIS)

Lavaitte, A.; Pottier, J.

1953-01-01

This equipment is destined to equip the separator of isotopes who is the subject of the CEA report n 138. It includes: - a controlled power supply in voltage. - a controlled power supply in current. The spectra of fluctuations of these assembly is different in the two cases. (authors) [fr

Canadian diluent supply : feast or famine?

Energy Technology Data Exchange (ETDEWEB)

MacKenzie, R.B. [Imperial Oil of Canada, Calgary, AB (Canada)

1998-12-31

The key factors affecting the supply and demand of diluent and its impact on the Canadian petroleum industry are discussed. Diluent is characterized as being a volatile commodity whose price is clearly determined by supply and demand. A graph showing historical prices and price forecasts to 2010 are included.

Electricity supply in India

International Nuclear Information System (INIS)

Abbott, H.J.

1993-09-01

This briefing deals with the electricity supply industry in India in two parts. In the first, the structure and organization of the industry is described under sections dealing with national government involvement, energy policy, state electricity boards, regional electricity boards, state corporations, the private sector and private investment in the power sector including foreign investment. Secondly, the power supply system is described covering generation, plant load factor, non-utility generation, nuclear power, transmission and distribution, system losses and electricity consumption. (8 tables) (UK)

Vaccine supply, demand, and policy: a primer.

Science.gov (United States)

Muzumdar, Jagannath M; Cline, Richard R

2009-01-01

To provide an overview of supply and demand issues in the vaccine industry and the policy options that have been implemented to resolve these issues. Medline, Policy File, and International Pharmaceutical Abstracts were searched to locate academic journal articles. Other sources reviewed included texts on the topics of vaccine history and policy, government agency reports, and reports from independent think tanks. Keywords included vaccines, immunizations, supply, demand, and policy. Search criteria were limited to English language and human studies. Articles pertaining to vaccine demand, supply, and public policy were selected and reviewed for inclusion. By the authors. Vaccines are biologic medications, therefore making their development and production more difficult and costly compared with "small-molecule" drugs. Research and development costs for vaccines can exceed $800 million, and development may require 10 years or more. Strict manufacturing regulations and facility upgrades add to these costs. Policy options to increase and stabilize the supply of vaccines include those aimed at increasing supply, such as government subsidies for basic vaccine research, liability protection for manufacturers, and fast-track approval for new vaccines. Options to increase vaccine demand include advance purchase commitments, government stockpiles, and government financing for select populations. High development costs and multiple barriers to entry have led to a decline in the number of vaccine manufacturers. Although a number of vaccine policies have met with mixed success in increasing the supply of and demand for vaccines, a variety of concerns remain, including developing vaccines for complex pathogens and increasing immunization rates with available vaccines. New policy innovations such as advance market commitments and Medicare Part D vaccine coverage have been implemented and may aid in resolving some of the problems in the vaccine industry.

Fuel supply security

International Nuclear Information System (INIS)

Wakabayashi, Hiroaki

1987-01-01

Stable fuel supply is a prerequisite for any nuclear power program including ISER-PIUS. It encompasses procurement of uranium ore, enriched uranium and fuel elements. Uranium is different from oil in that it can be stockpiled for more than a decade besides the fact that the core residence time is as long as six years, for example in the case of ISER-PIUS. These basic fuel characteristics are favoring nuclear fuel over others in terms of supply security. The central concern will be a gradual increase in prices of uranium and enrichment. Under the present glut situation with the worldwide prevalence of LWRs, fuel supply security seems ensured for the time being till the middle of 21st century. It is estimated that by the turn of the century, the free world will have roughly 450 GWe capacity of nuclear power. If 10 % is supplied for ISER-PIUS, more than 200 modules of 200 MWe ISER-PIUS may be deployed all over the world probably starting around 2000. As part of the fuel supply security consideration, heavy water reactor (HWR) may seem interesting to such a country as Indonesia where there is uranium resources but no enrichment capability. But it needs heavy water instead and the operation is not so easy as of LWR, because of the positive void coefficient as was seen at the Chernobyl-4. Safeguarding of the fuel is also difficult, because it lends itself to on line refueling. The current and future situation of the fuel supply security for LWR seem well founded and established long into the future. (Nogami, K.)

EIA projections of coal supply and demand

International Nuclear Information System (INIS)

Klein, D.E.

1989-01-01

Contents of this report include: EIA projections of coal supply and demand which covers forecasted coal supply and transportation, forecasted coal demand by consuming sector, and forecasted coal demand by the electric utility sector; and policy discussion

Forecasting world natural gas supply

International Nuclear Information System (INIS)

Al-Fattah, S. M.; Startzman, R. A.

2000-01-01

Using the multi-cyclic Hubert approach, a 53 country-specific gas supply model was developed which enables production forecasts for virtually all of the world's gas. Supply models for some organizations such as OPEC, non-OPEC and OECD were also developed and analyzed. Results of the modeling study indicate that the world's supply of natural gas will peak in 2014, followed by an annual decline at the rate of one per cent per year. North American gas production is reported to be currently at its peak with 29 Tcf/yr; Western Europe will reach its peak supply in 2002 with 12 Tcf. According to this forecast the main sources of natural gas supply in the future will be the countries of the former Soviet Union and the Middle East. Between them, they possess about 62 per cent of the world's ultimate recoverable natural gas (4,880 Tcf). It should be noted that these estimates do not include unconventional gas resulting from tight gas reservoirs, coalbed methane, gas shales and gas hydrates. These unconventional sources will undoubtedly play an important role in the gas supply in countries such as the United States and Canada. 18 refs., 2 tabs., 18 figs

Public-supply water use and self-supplied industrial water use in Tennessee, 2010

Science.gov (United States)

Robinson, John A.

2018-04-26

The U.S. Geological Survey (USGS), in cooperation with the Tennessee Department of Environment and Conservation, Division of Water Resources, prepared this report and displayed and analyzed water use by self-supplied industrial and public-supply water systems in Tennessee for 2010. Public-supply water systems in Tennessee provide water for domestic, industrial, and commercial uses and for municipal services. In 2010, 474 public-supply water systems distributed 917 million gallons per day (Mgal/d) of surface water (67 percent, 617 Mgal/d) and groundwater (33 percent, 300 Mgal/d) to a population of 5.7 million in Tennessee. Gross per capita water use in Tennessee during 2010 was 162 gallons per day.Since 1950, water withdrawals by public-supply water systems in Tennessee have increased from 160 Mgal/d to 917 Mgal/d in 2010. Each of the 95 counties in Tennessee was served by at least 1 public-supply water system in 2010. Tennessee public-supply water systems withdraw less groundwater than surface water, and surface-water use has increased at a faster rate than groundwater use. Since 2005, surface-water withdrawals have increased by 26 Mgal/d, and groundwater withdrawals have decreased by 29 Mgal/d, which is the first decrease in groundwater withdrawals since 1950; however, 29 systems reported increased groundwater withdrawals during 2010, and 12 of these 29 systems reported increases of 1 Mgal/d or more. Davidson County had the largest surface-water withdrawal rate (136 Mgal/d) in 2010. The largest groundwater withdrawal rate (151 Mgal/d) by a single public-supply water system was reported by Memphis Light, Gas and Water, which served more than 669,000 people in Shelby County in 2010.Self-supplied industrial water use includes water for such purposes as fabrication, processing, washing, diluting, cooling, or transporting a product; incorporating water into a product; or for sanitation needs in facilities that manufacture various products. Water withdrawals for self-supplied

Intermodal Supply Chain Risk Management

OpenAIRE

Maslarić, Marinko; Brnjac, Nikolina; Bago, Drago

2016-01-01

Efficient and secure global supply chains contribute to the Improvement of the competitiveness of the products traded on international markets by reducing their costs and delivery time while increasing the reliability and security. Global supply chains are unthinkable without transport integration, which is usually accomplished through the form of intermodal transport systems. Intermodal transport systems are much more complex than the unimodal ones due to the number of stakeholders, included...

Petroleum supply monthly, March 1994

Energy Technology Data Exchange (ETDEWEB)

1994-03-30

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

Sustainable Supply Chain Design in Social Businesses

DEFF Research Database (Denmark)

Tate, Wendy L.; Bals, Lydia

2018-01-01

A significant conceptual and practical challenge for companies is how to integrate triple bottom line (TBL) sustainability into their global supply chains. In supply chain research, the classic economic perspective—the business of business is to be profitable—still dominates, followed by coverage......, how to connect these insights into supply chain design for TBL sustainability has not been studied. Therefore, the purpose of this research was to move the theory of supply chain forward into the sustainable supply chain management (SSCM) research agenda. Toward that purpose, the paper analyzes...... of the environmental dimension; the social dimension is underrepresented. Stakeholders, however, are calling for a TBL perspective that simultaneously includes environmental, social, and economic gains. While there have been recent theoretical advances on how to characterize supply chains in terms of their structure...

Long-term uranium supply-demand analyses

International Nuclear Information System (INIS)

1986-12-01

It is the intention of this study to investigate the long-term uranium supply demand situation using a number of supply and demand related assumptions. For supply, these assumptions as used in the Resources and Production Projection (RAPP) model include country economic development status, and consequent lead times for exploration and development, uranium development status, country infrastructure, and uranium resources including the Reasonably Assured (RAR), Estimated Additional, Categories I and II, (EAR-I and II) and Speculative Resource categories. The demand assumptions were based on the ''pure'' reactor strategies developed by the NEA Working Party on Nuclear Fuel Cycle Requirements for the 1986 OECD (NEA)/IAEA reports ''Nuclear Energy and its Fuel Cycle: Prospects to 2025''. In addition for this study, a mixed strategy case was computed using the averages of the Plutonium (Pu) burning LWR high, and the improved LWR low cases. It is understandable that such a long-term analysis cannot present hard facts, but it can show which variables may in fact influence the long-term supply-demand situation. It is hoped that results of this study will provide valuable information for planners in the uranium supply and demand fields. Periodical re-analyses with updated data bases will be needed from time to time

Sustainability evaluation of water supply technologies

DEFF Research Database (Denmark)

Godskesen, Berit

Sustainability evaluation of water supply systems is important to include in the decision making process when planning new technologies or resources for water supply. In Denmark the motivations may be many and different for changing technology, but since water supply is based on groundwater...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle......-criteria decision analysis method was used to develop a decision support system and applied to the study. In this thesis a standard LCA of the drinking water supply technology of today (base case) and 4 alternative cases for water supply technologies is conducted. The standard LCA points at the case rain...

Impact of extraneous mispositioned events on motion-corrected brain SPECT images of freely moving animals

International Nuclear Information System (INIS)

Angelis, Georgios I.; Ryder, William J.; Bashar, Rezaul; Meikle, Steven R.; Fulton, Roger R.

2014-01-01

Purpose: Single photon emission computed tomography (SPECT) brain imaging of freely moving small animals would allow a wide range of important neurological processes and behaviors to be studied, which are normally inhibited by anesthetic drugs or precluded due to the animal being restrained. While rigid body motion of the head can be tracked and accounted for in the reconstruction, activity in the torso may confound brain measurements, especially since motion of the torso is more complex (i.e., nonrigid) and not well correlated with that of the head. The authors investigated the impact of mispositioned events and attenuation due to the torso on the accuracy of motion corrected brain images of freely moving mice. Methods: Monte Carlo simulations of a realistic voxelized mouse phantom and a dual compartment phantom were performed. Each phantom comprised a target and an extraneous compartment which were able to move independently of each other. Motion correction was performed based on the known motion of the target compartment only. Two SPECT camera geometries were investigated: a rotating single head detector and a stationary full ring detector. The effects of motion, detector geometry, and energy of the emitted photons (hence, attenuation) on bias and noise in reconstructed brain regions were evaluated. Results: The authors observed two main sources of bias: (a) motion-related inconsistencies in the projection data and (b) the mismatch between attenuation and emission. Both effects are caused by the assumption that the orientation of the torso is difficult to track and model, and therefore cannot be conveniently corrected for. The motion induced bias in some regions was up to 12% when no attenuation effects were considered, while it reached 40% when also combined with attenuation related inconsistencies. The detector geometry (i.e., rotating vs full ring) has a big impact on the accuracy of the reconstructed images, with the full ring detector being more

Oil sands supply outlook

International Nuclear Information System (INIS)

Dunbar, R.

2004-01-01

In March 2004, The Canadian Energy Research Institute released a report on the expected future supply from Alberta's oil sands. The report indicates that the future for the already well-established oil sands industry is promising, particularly given the outlook for oil prices. The challenges facing the industry include higher industry supply costs and the need for innovative commercial and technological solutions to address the risks of irregularities and changes in crude oil prices. In 2003, the industry produced 874 thousand barrels per day of synthetic crude oil and unprocessed crude bitumen. This represents 35 per cent of Canada's total oil production. Current production capacity has increased to 1.0 million barrels per day (mbpd) due to new projects. This number may increase to 3.5 mbpd by 2017. Some new projects may be deferred due to the higher raw bitumen and synthetic crude oil supply costs. This presentation provided supply costs for a range of oil sands recovery technologies and production projections under various business scenarios. tabs., figs

Task Experience as a Boundary Condition for the Negative Effects of Irrelevant Information on Learning

Science.gov (United States)

Rop, Gertjan; van Wermeskerken, Margot; de Nooijer, Jacqueline A.; Verkoeijen, Peter P. J. L.; van Gog, Tamara

2018-01-01

Research on multimedia learning has shown that learning is hampered when a multimedia message includes extraneous information that is not relevant for the task, because processing the extraneous information uses up scarce attention and working memory resources. However, eye-tracking research suggests that task experience might be a boundary…

Petroleum supply monthly, January 1994

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

A dynamic game on Green Supply Chain Management

OpenAIRE

Mehrnoosh Khademi; Massimiliano Ferrara; Bruno Pansera; Mehdi Salimi

2015-01-01

In this paper, we establish a dynamic game to allocate CSR (Corporate Social Responsibility) to the members of a supply chain. We propose a model of three-tier supply chain in decentralized state that is including supplier, manufacturer and retailer. For analyzing supply chain performance in decentralized state and the relationships between the members of supply chain, we use Stackelberg game and we consider in this paper a hierarchical equilibrium solution for a two-level game. Specially, we...

Solid state modulator for klystron power supply XFEL TDS INJ

Science.gov (United States)

Zavadtsev, A. A.; Zavadtsev, D. A.; Zybin, D. A.; Churanov, D. V.; Shemarykin, P. V.

2016-09-01

The transverse deflecting system XFEL TDS INJ for European X-ray Free Electron Laser includes power supply for the CPI VKS-8262HS klystron. It has been designed for pulse high-voltage, cathode heating, solenoid and klystron ion pump. The klystron power supply includes solid state modulator, pulse transformer, controlled power supply for cathode heating and commercial power supplies for solenoid and ion pump. Main parameters of the modulator are 110 kV of peak voltage, 72 A peak current, and pulse length up to 6 μs. The klystron power supply has been developed, designed, manufactured, tuned, tested and installed in the XFEL building. All designed parameters are satisfied.

Hydraulic engine valve actuation system including independent feedback control

Science.gov (United States)

Marriott, Craig D

2013-06-04

A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

Finance and supply management project execution plan; TOPICAL

International Nuclear Information System (INIS)

BENNION, S.I.

1999-01-01

As a subproject of the HANDI 2000 project, the Finance and Supply Management system is intended to serve FDH and Project Hanford major subcontractor with financial processes including general ledger, project costing, budgeting, and accounts payable, and supply management process including purchasing, inventory and contracts management. Currently these functions are performed with numerous legacy information systems and suboptimized processes

76 FR 67721 - PNE Energy Supply, LLC;

Science.gov (United States)

2011-11-02

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-186-000] PNE Energy Supply, LLC; Supplemental Notice that Initial Market-Based Rate Filing Includes Request for Blanket... Supply, LLC's application for market-based rate authority, with an accompanying rate tariff, noting that...

Needed: a strategic approach to supply chain management.

Science.gov (United States)

Kowalski, Jamie C

2009-06-01

When devising a supply chain strategic plan, consider these points: Frame the supply chain broadly to include all possible components and expenses. Recognize how each part of the supply chain affects other parts. Engage all parties and customers in strategic discussions. Educate all involved. Objectively assess the current state. Visualize an unencumbered future state. Quantify quality, productivity, and financial goals.

What's Your Strategy for Supply Chain Disclosure?

OpenAIRE

Marshall, Donna; McCarthy, Lucy; McGrath, Paul; Harrigan, Fiona

2016-01-01

We live in an era where many organizations operate highly complex and globalized supply chains. While these supply chains are now required to be lean, agile and sustainable, they are also the focus of growing attention from a variety of external stakeholders seeking information that includes and frequently exceeds what the company is legally obliged to disclose. However, many companies have limited visibility of their supply chain information, have a poor understanding of their capabilities f...

Endogeneity of Money Supply: Evidence From Turkey

OpenAIRE

Oguzhan Cepni; Ibrahim Ethem Guney

2017-01-01

There is a long discussion among academics and central bankers about the theories of money supply. According to the exogenous view, central banks have the full control over money supply via policy actions including the adjustments of interest rates and reserve ratios, both of which alter commercial banks’ lending decisions. However, the theory of endogenous money supply emphasizes the role of demand for bank loans in money creation. More specifically, banks create money by meeting the demand ...

Protection of the MFTF accel power supplies

International Nuclear Information System (INIS)

Wilson, J.H.; Wood, J.C.

1979-01-01

The MFTF experiment's Sustaining Neutral Beam Power Supply System (SNBPSS) includes twenty-four 95 kV, 80 A accel dc power supplies (ADCPS). Each power supply includes a relatively high-impedance (20 percent) rectifier transformer and a step voltage regulator with a 50-100 percent voltage range. With this combination, the fault current for some postulated faults may be lower than the supply's full load current at maximum voltage. A design has been developed which uses protective relays and current-limiting fuses coordinated to detect phase and ground faults, DC faults, incorrect voltage conditions, rectifier faults, power factor correction capacitor faults, and overloads. This unusual solution ensures fast tripping on potentially destructive high-current faults and long-time delays at lower currents to allow 30 second pulse operation. The ADCPS meets the LLL specification that all major assemblies be self-protecting, that is, able to sustain external faults without damage to minimize damage due to internal faults

Understanding the supply chain

Directory of Open Access Journals (Sweden)

Aćimović Slobodan

2006-01-01

Full Text Available Supply chain management represents new business philosophy and includes strategically positioned and much wider scope of activity in comparison with its "older brother" - management of logistics. Philosophy of the concept of supply chain is directed to more coordination of key business functions of every link in distribution chain in the process of organization of the flow of both goods and information, while logistic managing instruments are focused on internal optimum of flows of goods and information within one company. Applying the concept of integrated supply chain among several companies makes the importance of operative logistics activity even greater on the level of one company, thus advancing processes of optimum and coordination within and between different companies and confirms the importance of logistics performances for the company’s profitability. Besides the fact that the borders between companies are being deleted, this concept of supply chain in one distribution channel influences increasing of importance of functional, i.e. traditional business managing approaches but instead it points out the importance of process managing approaches. Although the author is aware that "there is nothing harder, more dangerous and with uncertain success, but to find a way for introducing some novelties (Machiavelli, it would be even his additional stimulation for trying to bring closer the concept and goals of supply chain implementation that are identified in key, relevant, modern, theoretical and consulting approaches in order to achieve better understanding of the subject and faster implementation of the concept of supply chain management by domestic companies.

Petroleum Supply Monthly, July 1990

Energy Technology Data Exchange (ETDEWEB)

1990-09-28

Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Port supply chain integration : analyzing biofuel supply chains

NARCIS (Netherlands)

Stevens, Leonie C. E.; Vis, Iris F. A.

2016-01-01

This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role,

SUPPLY CHAIN RISKS: LITERATURE REVIEW AND A NEW CATEGORIZATION

OpenAIRE

Er Kara, Merve; Oktay Fırat, Seniye Ümit

2017-01-01

Identification of risks is the first step to build a resilient and sustainable supply chain and develop proactive risk management strategies. Supply chains contain numerous risks with different forms, probabilities and impacts. Supply chain risks have a multi-dimensional nature and can result from a wide variety of sources including demand and supply variability, poor performing suppliers, price fluctuations, dynamic consumer markets, global economic uncertainty, and even unexpected events su...

Foreign uranium supply. Final report

International Nuclear Information System (INIS)

McLeod, N.B.; Steyn, J.J.

1978-04-01

This report presents an assessment of the extent to which foreign uranium may be available to United States utilities in the short term (through 1980), the intermediate term (1981--1985), and the long term (1986--95). All free world foreign uranium producers and prospects are included, with particular emphasis on Australia, Canada, southern Africa, France, and French-speaking Africa. The assessment includes reserves, resources, exploration and prospects; firm and potential production capacity and prospects; national policies and relevant political and economic conditions; foreign uranium demand; etc. Conclusions are: Foreign supply capability is greater than foreign demand in the near term. The current availability of uncommitted future Australian production presents an unusual opportunity for establishing commercial relations with very substantial producers. Foreign uranium contracts represent an increase in diversity of supply and access to resources but have less assurance of supply than do domestic contracts. However, uncertainties can frequently be accommodated within an overall procurement program, thereby retaining the diversity and price advantages of foreign procurement. The practice of market pricing of contracts reduces the incentives for foreign contracting

Petroleum supply annual 1996: Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs.

Petroleum supply annual 1996: Volume 1

International Nuclear Information System (INIS)

1997-06-01

The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs

Energy costs and Portland water supply system

Energy Technology Data Exchange (ETDEWEB)

Elliott, W.M.; Hawley, R.P.

1981-10-01

The changing role of electrical energy on the Portland, Oregon, municipal-water-supply system is presented. Portland's actions in energy conservation include improved operating procedures, pump modifications, and modifications to the water system to eliminate pumping. Portland is implementing a small hydroelectric project at existing water-supply dams to produce an additional source of power for the area. Special precautions in construction and operation are necessary to protect the high quality of the water supply. 2 references, 7 figures.

The Supply of Medical Radioisotopes. Results from the Second Self-assessment of the Global 99Mo/99mTc Supply Chain

International Nuclear Information System (INIS)

Peykov, Pavel; Cameron, Ron

2014-07-01

At the request of its member countries, the OECD Nuclear Energy Agency (NEA) became involved in global efforts to ensure a secure supply of 99 Mo/ 99m Tc. Since June 2009, the NEA and its High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) examined the issues that led to supply shortages and developed a policy approach, including six principles and supporting recommendations to address those issues. The governments of HLG-MR member countries agreed to implement the policy approach, within three years of its adoption, i.e. by June 2014. In the second mandate of the HLG-MR (2011-2013), the NEA secretariat undertook a review of the 99 Mo/ 99m Tc supply chain, based on input from key supply chain participants, with a focus on full-cost recovery, outage reserve capacity and the governments' role in the market. The results from this first self-assessment were published in Implementation of the HLG-MR Policy Approach: Results from a Self-assessment by the Global 99 Mo/ 99m Tc Supply Chain (NEA, 2013a). In its third mandate (2013-2015), the HLG-MR has continued to evaluate progress towards the implementation of the six policy principles and encourage governments and supply chain participants to take actions for secure supply of 99 Mo/ 99m Tc in the future. This report provides information from the second self-assessment by supply chain participants and analyses the progress made towards the implementation of the HLG-MR policy approach, compared with the first self-assessment. The focus of the second self-assessment is on all agreed policy principles (Principle 6 calls for periodic reviews of the supply chain and is being implemented by undertaking the self-assessment.) The report is organised as follows: Chapter 2 presents a brief summary of the HLG-MR policy approach, including the six principles that are critical to achieving long-term security of supply, and supporting recommendations. Chapter 3 explains the objectives and methodology of the

Antiretroviral procurement and supply chain management.

Science.gov (United States)

Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

2014-01-01

Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

Present and Future Supply of Registered Nurses.

Science.gov (United States)

Altman, Stuart H.

During the 1960's, nursing education shifted dramatically away from hospital-operated diploma schools toward associate degree and baccalaureate programs. This report examines the nature of this shift in training and its anticipated impact on future supply. Other important factors affecting the future supply of nurses are analyzed, including the…

Examining supply changes in Australia's cocaine market.

Science.gov (United States)

Hughes, Caitlin E; Chalmers, Jenny; Bright, David A; Matthew-Simmons, Francis; Sindicich, Natasha

2012-05-01

Media attention to cocaine use and supply has increased following some of the largest cocaine seizures in Australia's history. Whether there has been an expansion in supply remains unclear. This paper examines the evidence behind assertions of increased supply in Australia and the scale and nature of any apparent increase, using proxy indicators of cocaine importation, distribution and use. Eight proxies of cocaine importation, distribution and use were adopted, including amount of importation, mode of importation and supply flows to Australia. Each proxy indicator was sourced using publicly available and Australia-wide data, including information on the total weight of border seizures, mode of detection and country of embarkation of individual seizures. Data permitting, trends were examined for up to a 12 year period (1997-1998 to 2009-2010). Since 2006-2007 there was evidence of increased cocaine importation, albeit less than between 1998-1999 and 2001-2002. There were further signs that the 2006-2007 expansion coincided with a diversification of trafficking routes to and through Australia (beyond the traditional site of entry-Sydney) and shifts in the geographic distribution of use. The congruity between indicators suggests that there has been a recent expansion in cocaine supply to and distribution within Australia, but that the more notable shift has concerned the nature of supply, with an apparent growth in importation and distribution beyond New South Wales. The diversification of cocaine supply routes may increase risks of market entrenchment and organised crime throughout Australia. © 2011 Australasian Professional Society on Alcohol and other Drugs.

Optimization of Consignment-Store-Based Supply Chain with Black Hole Algorithm

Directory of Open Access Journals (Sweden)

Ágota Bányai

2017-01-01

Full Text Available The globalization of economy and market led to increased networking in the field of manufacturing and services. These manufacturing and service processes including supply chain became more and more complex. The supply chain includes in many cases consignment stores. The design and operation of these complex supply chain processes can be described as NP-hard optimization problems. These problems can be solved using sophisticated models and methods based on metaheuristic algorithms. This research proposes an integrated supply model based on consignment stores. After a careful literature review, this paper introduces a mathematical model to formulate the problem of consignment-store-based supply chain optimization. The integrated model includes facility location and assignment problems to be solved. Next, an enhanced black hole algorithm dealing with multiobjective supply chain model is presented. The sensitivity analysis of the heuristic black hole optimization method is also described to check the efficiency of new operators to increase the convergence of the algorithm. Numerical results with different datasets demonstrate how the proposed model supports the efficiency, flexibility, and reliability of the consignment-store-based supply chain.

Nuclear power: energy security and supply assurances

International Nuclear Information System (INIS)

Rogner, H.H.; McDonald, A.

2008-01-01

Expectations are high for nuclear power. This paper first summarizes recent global and regional projections for the medium-term, including the 2007 updates of IAEA projections plus International Energy Agency and World Energy Technology Outlook projections to 2030 and 2050. One driving force for nuclear power is concern about energy supply security. Two potential obstacles are concerns about increased nuclear weapon proliferation risks, and concerns by some countries about potential politically motivated nuclear fuel supply interruptions. Concerning supply security, the paper reviews different definitions, strategies and costs. Supply security is not free; nor does nuclear power categorically increase energy supply security in all situations. Concerning proliferation and nuclear fuel cut-off risks, the IAEA and others are exploring possible 'assurance of supply' mechanisms with 2 motivations. First, the possibility of a political fuel supply interruption is a non-market disincentive discouraging investment in nuclear power. Fuel supply assurance mechanisms could reduce this disincentive. Second, the risk of interruption creates an incentive for a country to insure against that risk by developing a national enrichment capability. Assurance mechanisms could reduce this incentive, thereby reducing the possible spread of new national enrichment capabilities and any associated weapon proliferation risks. (orig.)

Knowledge management system for risk mitigation in supply chain uncertainty: case from automotive battery supply chain

Science.gov (United States)

Marie, I. A.; Sugiarto, D.; Surjasa, D.; Witonohadi, A.

2018-01-01

Automotive battery supply chain include battery manufacturer, sulphuric acid suppliers, polypropylene suppliers, lead suppliers, transportation service providers, warehouses, retailers and even customers. Due to the increasingly dynamic condition of the environment, supply chain actors were required to improve their ability to overcome various uncertainty issues in the environment. This paper aims to describe the process of designing a knowledge management system for risk mitigation in supply chain uncertainty. The design methodology began with the identification of the knowledge needed to solve the problems associated with uncertainty and analysis of system requirements. The design of the knowledge management system was described in the form of a data flow diagram. The results of the study indicated that key knowledge area that needs to be managed were the knowledge to maintain the stability of process in sulphuric acid process and knowledge to overcome the wastes in battery manufacturing process. The system was expected to be a media acquisition, dissemination and storage of knowledge associated with the uncertainty in the battery supply chain and increase the supply chain performance.

Petroleum supply monthly - with data for May 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. This document contains a glossary.

Petroleum supply monthly with data from April 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Forecasting Ontario's blood supply and demand.

Science.gov (United States)

Drackley, Adam; Newbold, K Bruce; Paez, Antonio; Heddle, Nancy

2012-02-01

Given an aging population that requires increased medical care, an increasing number of deferrals from the donor pool, and a growing immigrant population that typically has lower donation rates, the purpose of this article is to forecast Ontario's blood supply and demand. We calculate age- and sex-specific donation and demand rates for blood supply based on 2008 data and project demand between 2008 and 2036 based on these rates and using population data from the Ontario Ministry of Finance. Results indicate that blood demand will outpace supply as early as 2012. For instance, while the total number of donations made by older cohorts is expected to increase in the coming years, the number of red blood cell (RBC) transfusions in the 70+ age group is forecasted grow from approximately 53% of all RBC transfusions in 2008 (209,515) in 2008 to 68% (546,996) by 2036. A series of alternate scenarios, including projections based on a 2% increase in supply per year and increased use of apheresis technology, delays supply shortfalls, but does not eliminate them without active management and/or multiple methods to increase supply and decrease demand. Predictions show that demand for blood products will outpace supply in the near future given current age- and sex-specific supply and demand rates. However, we note that the careful management of the blood supply by Canadian Blood Services, along with new medical techniques and the recruitment of new donors to the system, will remove future concerns. © 2012 American Association of Blood Banks.

The fish industry - toward supply chain modelling

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling

2010-01-01

such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first......Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects...... step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry....

Control units for APS power supplies

International Nuclear Information System (INIS)

Despe, O.D.; Saunders, C.; McGhee, D.G.

1993-01-01

The Advanced Photon Source (APS) accelerator facility is made up of five major subsystems in addition to the linac: the positron accumulator ring (PAR), low energy transport (LET), booster synchrotron (SYNCH), high energy transport (HET), the storage ring (SR). Each subsystem has multiple magnet power supply combinations, some requiring multiple of operation. These magnet and power supply combinations computer controlled and monitored. The power supply control unit (PSCU) is the first layer of hardware and software above the power supply itself and is described in this paper. The description includes the basic philosophy for each of operation and how it influences the topology and of implementing control. The design of the analog reference blocks (ARBs) influenced the design of other custom functions well as the feedback controls for vibration and other dynamic corrections. The command set supported by the PSCU is discussed

Projecting southern timber supply for multiple products by subregion

Science.gov (United States)

Robert C. Abt; Frederick W. Cubbage; Karen L. Abt

2009-01-01

While timber supply modeling has been of importance in the wood-producing regions of the United States for decades, it is only more recently that the technology and data have allowed disaggregation of supply and demand to substate regions, including product specific breakdowns and endogenous land use and plantation changes. Using southwide data and an economic supply...

Public Water Supply Systems (PWS)

Data.gov (United States)

Kansas Data Access and Support Center — This dataset includes boundaries for most public water supply systems (PWS) in Kansas (525 municipalities, 289 rural water districts and 13 public wholesale water...

Petroleum supply monthly with data from January 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Petroleum supply monthly with data for March 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Vancouver Island gas supply

International Nuclear Information System (INIS)

Des Brisay, C.

2005-01-01

Terasen Gas is pursuing alternatives for the supply of additional natural gas capacity to Vancouver Island. Its subsidiary, Terasen Gas (Vancouver Island) Inc. (TGVI), is responding to the need for delivery of increased gas supply and, is supporting plans for new gas-fired power generation on Vancouver Island. TGVI's proposal for new natural gas capacity involves a combination of compression and pipeline loops as well as the addition of a storage facility for liquefied natural gas (LNG) at Mt. Hayes to help manage price volatility. This presentation outlined the objectives and components of the resource planning process, including demand forecast scenarios and the preferred infrastructure options. tabs., figs

Renewables in Global Energy Supply

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Renewable energies are essential contributors to the energy supply portfolio as they contribute to world energy supply security, reducing dependency on fossil fuel resources, and provide opportunities for mitigating greenhouse gases. Differences in definition and lack of adequate data complicated the discussion between participants on these key issues. The International Energy Agency believes that this fact sheet can be of use to all to facilitate the debate on the past, current and future place and role of renewables in total energy supply. Our goal is to present as objectively as possible the main elements of the current renewables energy situation. The definitions and coverage of national statistics vary between countries and organisations. In this fact sheet, the renewables definition includes combustible renewables and waste (CRW), hydro, geothermal, solar, wind, tide and wave energy.

Successful use of e‐procurement in supply chains

OpenAIRE

Puschmann, Thomas; Alt, Rainer

2005-01-01

Purpose – Electronic support of internal supply chains for direct or production goods has been a major element during the implementation of enterprise resource planning (ERP) systems that has taken place since the late 1980s. However, supply chains to indirect material suppliers were not usually included due to low transaction volumes, low product values and low strategic importance of these goods. Dedicated information systems for streamlining indirect goods supply chains have emerged...

Problems of natural uranium supply

Energy Technology Data Exchange (ETDEWEB)

Huwyler, S [Eidgenoessisches Inst. fuer Reaktorforschung, Wuerenlingen (Switzerland)

1977-11-01

The estimated uranium reserves in the Western World and the forecast uranium requirement in this region make the supply of nuclear power stations appear guaranteed well beyond the turn of the century. At least in the next decade it will be possible to exploit the advantageous uranium reserves in low price category, provided that prospection activities are stepped up soon and production capacities are expanded in time which are not even fully utilized today. However, difficulties could arise earlier in those countries which have no uranium reserves of their own. There is an increasing tendency among uranium producing countries to link supplies of their uranium with restrictive conditions. This makes long term contractual uranium supply guarantees a most pressing matter for those countries which have no uranium of their own. Even if the delays in the addition of new nuclear power plants are likely to improve the supply situation in the next few years, supply shortages will have to be anticipated at least from the nineties onward, unless exploitation and dressing activities are expanded considerably and also low grade ores are included in the production. At the same time it appears that the use of plutonium fueled fast breeder reactors will be unavoidable in the nineties.

Progressive IRP Models for Power Resources Including EPP

Directory of Open Access Journals (Sweden)

Yiping Zhu

2017-01-01

Full Text Available In the view of optimizing regional power supply and demand, the paper makes effective planning scheduling of supply and demand side resources including energy efficiency power plant (EPP, to achieve the target of benefit, cost, and environmental constraints. In order to highlight the characteristics of different supply and demand resources in economic, environmental, and carbon constraints, three planning models with progressive constraints are constructed. Results of three models by the same example show that the best solutions to different models are different. The planning model including EPP has obvious advantages considering pollutant and carbon emission constraints, which confirms the advantages of low cost and emissions of EPP. The construction of progressive IRP models for power resources considering EPP has a certain reference value for guiding the planning and layout of EPP within other power resources and achieving cost and environmental objectives.

Dietetics supply and demand: 2010-2020.

Science.gov (United States)

Hooker, Roderick S; Williams, James H; Papneja, Jesleen; Sen, Namrata; Hogan, Paul

2012-03-01

The Academy of Nutrition and Dietetics, in conjunction with the Commission on Dietetic Registration (CDR), invited The Lewin Group to undertake an analysis of the dietetics workforce. The purpose of the workforce study was to develop a model that can project the supply and demand for both registered dietitians (RDs) and dietetic technicians, registered (DTRs) (collectively referred to as CDR-credentialed dietetics practitioners) as the result of various key drivers of change. The research team was asked to quantify key market factors where possible and to project likely paths for the evolution of workforce supply and demand, as well as to assess the implications of the findings. This article drew on the survey research conducted by Readex Research and futurist organizations such as Signature i and Trend Spot Consulting. Furthermore, members of the Dietetics Workforce Demand Task Force were a source of institutional and clinical information relevant to the credentialed dietetics workforce--including their opinions and judgment of the current state of the health care market for dietetic services, its future state, and factors affecting it, which were useful and were integrated with the objective sources of data. The model is flexible and accommodates the variation in how RDs and DTRs function in diverse practice areas. For purposes of this study and model, the dietetics workforce is composed of RDs and DTRs. This report presents the results of this workforce study and the methodology used to calculate the projected dietetics workforce supply and demand. The projections are based on historical trends and estimated future changes. Key findings of the study included the following: • The average age of all CDR-credentialed dietetics practitioners in baseline supply (2010) is 44 years; approximately 96% are women. • Approximately 55% of CDR-credentialed dietetics practitioners work in clinical dietetics. • The annual growth rate of supply of CDR

Long-term trends in US gas supply and prices: 1993 edition of the GRI baseline projection of US energy supply and demand to 2010

International Nuclear Information System (INIS)

Woods, T.J.

1993-03-01

A Summary of the gas supply outlook in the 1993 Edition of the GRI Baseline Projection of U.S. Energy Supply and Demand, adopted as a major input to the planning cycle of the 1994 research and development program, is presented. Significant changes were made in developing the gas supply and price trends for the 1993 edition of the projection. The GRI Hydrocarbon Model was expanded to include the Canadian hydrocarbon resource base. Thus, Canadian and lower-48 gas production and prices were developed on a fully integrated basis in the 1993 projection. The lower-48 hydrocarbon resource estimate was increased, reflecting the results of the recent National Petroleum Council gas study and ongoing GRI resource work. The effects of new technology and practice on drilling costs and exploration efficiency were included for the first time. Appendices include comparisons of supply and price trends

Supporting Smallholders to Access Sustainable Supply Chains : Lessons from the Indian Cotton Supply Chain

NARCIS (Netherlands)

Fayet, Laia; Vermeulen, Walter J V

2014-01-01

A significant number of different sustainable initiatives have emerged to improve sustainability and inclusion of small farmers in global supply chains. These include production process adjustment advice and implementation of different sustainable product standards. In practice two different

Supporting Smallholders to Access Sustainable Supply Chains: Lessons form the Indian Cotton Supply Chain

NARCIS (Netherlands)

Fayet, L.; Vermeulen, W.J.V.

2013-01-01

A significant number of different sustainable initiatives have emerged to improve sustainability and inclusion of small farmers in global supply chains. These include production process adjustment advice and implementation of different sustainable product standards. In practice two different

Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

OpenAIRE

Patalinghug, Epictetus E.

2015-01-01

Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

Synergies between energy supply networks

DEFF Research Database (Denmark)

Wu, Jianzhnog; Yan, Jinyue; Desideri, Umberto

2017-01-01

Energy system integration uses a whole-system approach to optimize the synergies between energy supply networks to facilitate and coordinate the grid integration of distributed energy resources while enabling the synergies and conflicts between the local distribution networks and the national lev...... and integration of local renewables including solar energy wind geothermal waste heat and biomass is presented.......Energy system integration uses a whole-system approach to optimize the synergies between energy supply networks to facilitate and coordinate the grid integration of distributed energy resources while enabling the synergies and conflicts between the local distribution networks and the national level...... objectives to be understood and optimally coordinated. The latest research on the network coupling technologies analysis of synergies between energy supply networks and optimal use of synergies in network operation is discussed. A diagram on the possible interactions between different energy networks...

Electricity supply in the UK

Energy Technology Data Exchange (ETDEWEB)

Eden, R; Evans, N

1986-01-01

This study is about future needs for electricity in the United Kingdom, the options for meeting these needs, and the issues that affect the choices between options. It examines the implications of the nuclear accident at Chernobyl and the problems that could arise if decisions on new power station construction continue to be delayed following the Sizewell PWR Inquiry. The book reviews the historical development of electricity supply in the UK. Alternative scenarios are outlined for future energy and electricity demand and their implications for future power station construction are deduced. Issues that are discussed include the choice of coal or nuclear power and the related political uncertainties, environmental problems such as acid rain, feasibility and costs of electricity supply options, and the likely effect on future energy import costs of alternative choices for electricity supply.

Alignment of global supply networks based on strategic groups of supply chains

Directory of Open Access Journals (Sweden)

Nikos G. Moraitakis

2017-09-01

Full Text Available Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic supply chain perspective in order to align regional competitive priorities and supply chain structures. The objective of this research is hence to develop an approach for the supply-chain-based alignment of complex global supply networks. Method: We review existing literature from the fields of supply chain and network management, strategic sourcing, and strategic management. Based on the literature review and theoretical and practical considerations we deduce a conceptual approach to consider upstream supply chain structures in supply network alignment initiatives. Results: On the basis of these considerations and current empirical literature we transfer strategic group theory to the supply network management context. The proposed approach introduces strategic groups of supply chains as a segmentation criterion for complex global supply networks which enables the network-wide alignment of competitive priorities. Conclusion: Supply-chain-based segmentation of global supply network structures can effectively reduce the complexity, firms face when aiming to strategically align their supply chains on a holistic level. The results of this research are applicable for certain types of global supply networks and can be used for network alignment and strategy development. The approach can furthermore generate insights useable for negotiation support with suppliers.

Analyzing effective elements in agile supply chain

Directory of Open Access Journals (Sweden)

Babak Jamshidi Navid

2012-01-01

Full Text Available Agile supply chain plays an important role on having efficient production planning. There are different factors affecting the efficiency of a supply chain and the attempt of this paper is to find the most important elements in agile supply chain. The proposed model of this paper gathers decision makers' opinions and based on DEMATEL technique determines the most important items. The preliminary results of this survey indicate that we could divide the factors into four groups and two elements including automation and utilization of technical tools of relations and information play the most important roles among other factors.

Population Model with a Dynamic Food Supply

Science.gov (United States)

Dickman, Ronald; da Silva Nascimento, Jonas

2009-09-01

We propose a simple population model including the food supply as a dynamic variable. In the model, survival of an organism depends on a certain minimum rate of food consumption; a higher rate of consumption is required for reproduction. We investigate the stationary behavior under steady food input, and the transient behavior of growth and decay when food is present initially but is not replenished. Under a periodic food supply, the system exhibits period-doubling bifurcations and chaos in certain ranges of the reproduction rate. Bifurcations and chaos are favored by a slow reproduction rate and a long period of food-supply oscillation.

US energy product supply elasticities. A survey and application to the US oil market

International Nuclear Information System (INIS)

Dahl, Carol; Duggan, Thomas E.

1996-01-01

We survey studies of simple energy supply models to find the most promising technique for developing supply elasticities in the U.S. crude oil market. The two dozen studies located include direct estimates of energy supply elasticities or cost studies from which supply or reserve elasticities can be inferred. We include all available studies for all forms of energy both primary and secondary. We find direct estimates of oil supply to obtain weak results unless depletion and price expectations are included. Oil product supply elasticities vary widely across studies but appear to be elastic. Studies that estimate reserve price elasticities by computing reserve costs appear to be the most promising for estimating reserve elasticities for fossil fuel supply. Hence we apply this technique to US oil reserves and find a reserve elasticity of 1.27

Endogeneity of Money Supply: Evidence From Turkey

Directory of Open Access Journals (Sweden)

Oguzhan Cepni

2017-02-01

Full Text Available There is a long discussion among academics and central bankers about the theories of money supply. According to the exogenous view, central banks have the full control over money supply via policy actions including the adjustments of interest rates and reserve ratios, both of which alter commercial banks’ lending decisions. However, the theory of endogenous money supply emphasizes the role of demand for bank loans in money creation. More specifically, banks create money by meeting the demand of economic agents. In this study, we investigate which of the money supply theories holds in Turkish economy for the period 2006-2015 by employing cointegration and causality tests. Our findings show that the causality runs from bank loans to money supply both in the short and long terms, which supports the endogenous view in a sense that central bank and the banks fully meet the total demand for money in Turkish economy.

How manufacturers can use their reverse supply chain: a typology of reverse supply chain roles

DEFF Research Database (Denmark)

Larsen, Samuel; Jacobsen, Peter

2014-01-01

While traditional forward supply chains end with customer markets, the reverse supply chain (RSC) both begins and ends with the firm’s markets. The study applies the prevalent conceptual RSC‐description in the theoretical field by Guide and Van Wassenhove (2009). In the description, the RSC begins...... is not explicitly part of the description, this study does include them as disposition strategies. Although some RSC topics have been fairly well‐addressed in extant literature (e.g. product acquisition, inventory models and product disassembly), the RSC‐topic remains under‐explored (Pohkarel and Mutha, 2009...... the reverse logistical processes required for supporting a liberal return policy, etc. Based on extant literature from the supply chain management and OM fields, this study develops a conceptual typology of what roles the RSC can play in the firm’s efforts of achieving higher overall economic profits. Each...

The supply of medical radioisotopes - The Path to Reliability

International Nuclear Information System (INIS)

2011-01-01

The reliable supply of molybdenum-99 ( 99 Mo) and its decay product, technetium-99m ( 99m Tc), is a vital component of modern medical diagnostic practices. Disruptions in the supply chain of these radioisotopes can delay or prevent important medical testing services. Unfortunately, supply reliability has declined over the past decade, due to unexpected or extended shutdowns at the few ageing, 99 Mo-producing, research reactors and processing facilities. These shutdowns have recently created global supply shortages. This report provides the findings and analysis of two years of extensive examination of the 99 Mo/ 99m Tc supply chain by the OECD/NEA High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR). It puts forth a comprehensive policy approach that would help ensure long-term supply security of 99 Mo/ 99m Tc, detailing the essential steps to be taken by governments, industry and the health community to address the vulnerabilities of the supply chain, including its economic structure. (authors)

Water supply

International Nuclear Information System (INIS)

Peterson, F.L.

1986-01-01

Options and methodologies for the development of fresh water supplies on Bikini Atoll are much the same as those practiced in the rest of the Marshall Islands and for that matter, most atolls in the central Pacific Ocean Basin. That is, rainfall distribution on Bikini produces a distinct wet season, lasting from about May through November, with the remaining months being generally dry. As a result, fresh water from surface catchments tends to be plentiful during the wet season? but is usually scarce during the dry months, and alternative sources such as groundwater must be utilized during this time. On Bikini the problems of fresh water supply are somewhat more difficult than for most Marshall Island atolls because rainfall is only about half the Marshall Island's average. Tus water supply is a critical factor limiting the carrying capacity of Bikini Atoll. To address this problem BARC has undertaken a study of the Bikini Atoll water supply. Te primary objectives of this work are to determine: (1) alternatives available for fresh water supply, 2 the amounts, location and quality of available supplies and 3 optimal development methods. The study planned for one's year duration, has been underway only since the summer of 1985 and is thus not yet fully completed. However, work done to date, which is presented in this report of preliminary findings, provides a reasonably accurate picture of Bikini's fresh water supplies and the various options available for their development. The work remaining to be completed will mainly add refinements to the water supply picture presented in the sections to follow

The future of medical radioisotope supply

International Nuclear Information System (INIS)

Peykov, Pavel

2014-01-01

The NEA and its High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) have been actively examining the causes of supply shortages of the most widely used isotope in medical diagnostic imaging, technetium-99m ( 99m Tc), and its parent isotope molybdenum-99 ( 99 Mo). As a result of this examination, the HLG-MR has developed a policy approach that includes principles and supporting recommendations to address the causes of these supply shortages. Six policy principles were agreed by the HLG-MR in March 2011. These are implementation of full-cost recovery and outage reserve capacity (ORC) for 99 Mo production, a government role in the market, conversion to low-enriched uranium targets, international collaboration and periodic reviews of the supply chain. This article describes progress made in the implementation of the six principles and examines the projected global capacity for medical radioisotope production in the near future. (author)

Supply chain solutions to improve the distribution of antiretroviral ...

African Journals Online (AJOL)

Recommendations to address the problems include: Implementing a supply chain planning and design process; improving inventory management and warehousing practices; implementing more effective and reliable distribution and transportation processes; as well as improving supply chain coordination and overall ...

Alberta's reserves 2004 and supply/demand outlook 2005-2014

International Nuclear Information System (INIS)

Burrowes, A.; Marsh, R.; Ramdin, N.; Evans, C.; Kirsch, M.A.; Philp, L.; Fujda, M.; Stenson, J.; Sadler, K.; Sankey, G.; Hill, C.; Rahnama, F.; Habib, G.; MacGillivray, J.

2005-01-01

This document presents information on the state of reserves, supply, and demand for Alberta's energy resources including bitumen, crude oil, coalbed methane (CBM), conventional natural gas, natural gas liquids, sulphur, and coal. Estimates of initial reserves, remaining established reserves, and ultimate potential were also included, along with a 10-year supply and demand forecast for Alberta's energy resources. The document presents major forecast assumptions that influence Alberta's energy supply and demand. Some of the main variables affecting energy supply and demand include the global oil market, energy prices, Canadian economic performance and the economic outlook for Alberta. The development of Alberta's energy resources depends on reserve supply, costs of development, energy demands, conservation, and social, economic and environmental considerations. In 2004, raw bitumen production continued to grow and accounted for 69 per cent of Alberta's total crude oil and bitumen production. The value-added process of upgrading raw bitumen to synthetic crude oil was also expanded in 2004. Natural gas production from all sources in Alberta increased by 1 per cent compared with 2003. CBM development also increased greatly in 2004. Although it accounted for 80 per cent of the cumulative CBM production to date, it only contributed 0.5 per cent of the provincial total natural gas production. It is expected that CBM development will continue to increase in the coming years. For that reason, a separate estimate of CBM reserves was included. tabs., figs

Exploration Supply Chain Simulation

Science.gov (United States)

2008-01-01

The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.

Logistics Sourcing Strategies in Supply Chain Design

OpenAIRE

Liu, Liwen

2007-01-01

A company's logistics sourcing strategy determines whether it structures and organizeslogistics within the company or company group or integrates logistics upstream and downstreamin the supply chain. First, three different types of logistics sourcing strategies in supply chaindesign are described and the theoretical background for the development of these strategies,including both transaction cost theory and network theory, is analyzed. Two special casesabout logistics sourcing strategy decis...

What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

OpenAIRE

Schwarz, Leroy B.

2008-01-01

A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

Developing Exchange in Short Local Foods Supply Chains

Directory of Open Access Journals (Sweden)

Per Engelseth

2016-07-01

Full Text Available The supply chain management of foods is commonly associated with modernistic large-scale production. This involves long transport distances of foods to reach consumers. In the case of local foods, supply chains are shorter. Based on a case study of five local foods producer's supply of their products to a common retailer, the supply chain of local foods is modelled conceptually and modes of development are pointed out based on contingency theory and supply chain management literature. Findings reveal that since these chains are transparent, reciprocal interdependency is abundant mainly because human perception creates a sufficient understanding of the operations management issues pertinent within this simple inter-organisational structure. Local foods supply chains are similar to service supply chains. This includes that both are short in nature and associated with bi-directional interaction between the customer and supplier. Developing short supply chains in local foods supply is associated with improving the exchange economy found in short supply chains. This also implies that development of local foods supply is associated with two paths which may be complementary. First, the use of improved intensive technology associated with reciprocal interdependency to develop efficiencies in the bi-directional and somewhat complex interaction. Alternatively local foods suppliers may seek to reduce this form of reciprocal interdependency thereby increasing the impact of pooled interdependencies and enabling using mediating technology involving standardising interaction such as through increased standardised products and packaging as well as automation of information connectivity.

The role of supply chain collaboration in supply chain risk mitigation

OpenAIRE

Chen, Jie

2017-01-01

In the last two decades, supply chain operations have changed drastically. Globalization of the market, shortened product life cycle, global outsourcing and offshoring, and increasing complexity of the supply base has resulted in modern supply chains becoming more vulnerable than ever. There are also more frequent natural or man-made disasters which disrupt the supply chain operations. All these have led to higher exposure of risks of supply chains and the failure to manage the...

Design of Supply Chain Networks with Supply Disruptions using Genetic Algorithm

OpenAIRE

Taha, Raghda; Abdallah, Khaled; Sadek, Yomma; El-Kharbotly, Amin; Afia, Nahid

2014-01-01

The design of supply chain networks subject to disruptions is tackled. A genetic algorithm with the objective of minimizing the design cost and regret cost is developed to achieve a reliable supply chain network. The improvement of supply chain network reliability is measured against the supply chain cost.

Significance of Supply Logistics in Big Cities

Directory of Open Access Journals (Sweden)

Mario Šafran

2012-10-01

Full Text Available The paper considers the concept and importance of supplylogistics as element in improving storage, supply and transportof goods in big cities. There is always room for improvements inthis segmenl of economic activities, and therefore continuousoptimisation of the cargo flows from the manufacturer to theend user is impor1a11t. Due to complex requirements in thecargo supply a11d the "spoiled" end users, modem cities represe/ll great difficulties and a big challenge for the supply organisers.The consumers' needs in big cities have developed over therecent years i11 such a way that they require supply of goods severaltimes a day at precisely determined times (orders are receivedby e-mail, and the information transfer is therefore instantaneous.In order to successfully meet the consumers'needs in advanced economic systems, advanced methods ofgoods supply have been developed and improved, such as 'justin time'; ''door-to-door", and "desk-to-desk". Regular operationof these systems requires supply logistics 1vhiclz includes thetotalthroughpw of materials, from receiving the raw materialsor reproduction material to the delive1y of final products to theend users.

Supply chain optimization by implementation of modern ICT

Directory of Open Access Journals (Sweden)

Soldat Drago S.

2014-01-01

Full Text Available This paper deals with most important techniques used for supply chain management including the latest applications and program tools intended for companies that do business in transport and logistics. The main goal of these technologies is management coherent data and exchange of information between companies and business units within the supply chain. The expansion of modern e-logistics applications transfers from private networks to Internet has been noticed in recent few years. Market globalization and e-business implementation have positioned portal as key element gathering employers, employees, business partners and end users P/S - main participants in every supply chain - by mutual interface. Thus, portals are often called mega portals of -supply chains.

Production planning and control of closed-loop supply chains

NARCIS (Netherlands)

K. Inderfurth (Karl); R.H. Teunter (Ruud)

2001-01-01

textabstractMore and more supply chains emerge that include a return flow of materials. Many original equipment manufacturers are nowadays engaged in the remanufacturing business. In many process industries, production defectives and by-products are reworked. These closed-loop supply chains deserve

Transparency and monitoring of security and adequacy of supply

International Nuclear Information System (INIS)

Newbery, D.; Von der Fehr, N.H.; Van Damme, E.

2003-08-01

The long-run performance of the electricity market relies on the behaviour of individual market participants, including investors (incumbents as well as entrants), consumers, traders and the financial community. In order for these market participants to make rational economic decisions they should have access to reliable information on the fundamental drivers for the market and how these evolve. Improving access to information is particularly important for decisions that involve long-term commitments, such as investment in new generation facilities. The Market Surveillance Committee (MSC) has been asked to advise on how market transparency can be increased in order to improve supply security and adequacy. In this report we discuss the need for transparency from the point of view of the market participants. We also present which information is made public in other electricity markets. We point out that, in addition to increasing transparency for market participants, there is also a need for adequate market monitoring by authorities. It may be necessary to change current rules and regulations to ensure that information is made available to both the relevant authorities and the market. From an economic efficiency point of view, security of supply is optimised if, at the margin, the costs of reducing forced rationing are balanced against the benefits of such reductions (including lowering of social costs associated with major interruptions to power supplies). Adequacy of supply is optimised if the costs of capacity expansions are aligned with the willingness to pay for the associated increases in supply capacity. To assess optimal supply security and adequacy, one would therefore need to monitor: the value of supply security to consumers, or inversely, the cost of forced rationing, e.g. as 'value of lost load' estimates; the frequency with which involuntary load-shedding is expected to occur on the basis of system characteristics, including statistical data and

North American supply/demand

International Nuclear Information System (INIS)

Pocino, M.C.

1998-01-01

The projected supply and demand for natural gas in five major regions of North America for the year 2000 was presented. In most regions, supply is expected to be greater than demand. A summary of how California dealt with an increase in natural gas demand in 1990 was presented. The California strategy included a readjustment of pipeline capacity, storage capacity and transportation. Whereas in the 1980s, when capacity was inadequate, the focus was on competition with alternate fuels, maximized capacity use, primary concern about reliability and only secondary concern about price, in the the 1990s, with excess capacity, the emphasis is on 'gas on gas' competition, efforts to satisfy the customer, primary concern about price, and only marginal concern about reliability. tabs., figs

Towards Intelligent Supply Chains

DEFF Research Database (Denmark)

Siurdyban, Artur; Møller, Charles

2012-01-01

applied to the context of organizational processes can increase the success rate of business operations. The framework is created using a set of theoretical based constructs grounded in a discussion across several streams of research including psychology, pedagogy, artificial intelligence, learning...... of deploying inapt operations leading to deterioration of profits. To address this problem, we propose a unified business process design framework based on the paradigm of intelligence. Intelligence allows humans and human-designed systems cope with environmental volatility, and we argue that its principles......, business process management and supply chain management. It outlines a number of system tasks combined in four integrated management perspectives: build, execute, grow and innovate, put forward as business process design propositions for Intelligent Supply Chains....

Pharmaceutical supply chain risks: a systematic review

Science.gov (United States)

2013-01-01

Introduction Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. Objective In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Methods Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Results Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. Conclusion It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies. PMID:24355166

Pharmaceutical supply chain risks: a systematic review.

Science.gov (United States)

Jaberidoost, Mona; Nikfar, Shekoufeh; Abdollahiasl, Akbar; Dinarvand, Rassoul

2013-12-19

Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies.

Supply Security in Future Nuclear Fuel Markets

Energy Technology Data Exchange (ETDEWEB)

Seward, Amy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wood, Thomas W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gitau, Ernest T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ford, Benjamin E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-11-18

Previous PNNL work has shown the existing nuclear fuel markets to provide a high degree of supply security, including the ability to respond to supply disruptions that occur for technical and non-technical reasons. It is in the context of new reactor designs – that is, reactors likely to be licensed and market ready over the next several decades – that fuel supply security is most relevant. Whereas the fuel design and fabrication technology for existing reactors are well known, the construction of a new set of reactors could stress the ability of the existing market to provide adequate supply redundancy. This study shows this is unlikely to occur for at least thirty years, as most reactors likely to be built in the next three decades will be evolutions of current designs, with similar fuel designs to existing reactors.

Supply Security in Future Nuclear Fuel Markets

International Nuclear Information System (INIS)

Seward, Amy M.; Wood, Thomas W.; Gitau, Ernest T.; Ford, Benjamin E.

2013-01-01

Previous PNNL work has shown the existing nuclear fuel markets to provide a high degree of supply security, including the ability to respond to supply disruptions that occur for technical and non-technical reasons. It is in the context of new reactor designs - that is, reactors likely to be licensed and market ready over the next several decades - that fuel supply security is most relevant. Whereas the fuel design and fabrication technology for existing reactors are well known, the construction of a new set of reactors could stress the ability of the existing market to provide adequate supply redundancy. This study shows this is unlikely to occur for at least thirty years, as most reactors likely to be built in the next three decades will be evolutions of current designs, with similar fuel designs to existing reactors.

ISABELLE magnet power supply system performance analysis

International Nuclear Information System (INIS)

Edwards, R.J.

1981-01-01

The power supply system that will energize the superconducting magnets in the ISABELLE 400 x 400 GeV accelerator must supply various voltages and currents. The voltages for the correction winding range from ten to one hundred twenty-five volts unipolar and bipolar with current rating of 50 to 300 amperes. The main field winding requires voltages from 90V (at flattop) to 600V during maximum ramp rate or acceleration cycle. The power supplies are programmable over their full range of output current with a reproducibility error varying from +- 10 ppM to +- 400 ppM of full scale. Included within the reproducibility error are the long and short term stability requirements of the power supplies. The purpose of this paper is to define some of the design goals and outline the approach taken in reaching these goals

Perspectives of energy supply in unified Germany

International Nuclear Information System (INIS)

Gieske, F.

1991-01-01

This article deals with the role of the various energy carriers within a future energy concept. The energy supply industry aims at a well-balanced energy mixture which is to include nuclear energy as well as domestic and imported coal. The supply industry will not turn a deaf ear to opening up the competitive scene, the author thinks, however, there well have to be special economic and technical preconditions. (orig.) [de

Time well spent? Assessing nursing-supply chain activities.

Science.gov (United States)

Ferenc, Jeff

2010-02-01

The amount of time nurses spend providing direct patient care seems to be continually eroding. So it's little wonder a survey conducted last year of critical care, OR nurses and nurse executives found that half of the 1600 respondents feel they spend too much time on supply chain duties. Most also said their supply chain duties impact patient safe ty and their ability to provide bedside care. Experts interviewed for this report believe it's time for supply chain leaders and nurses to develop a closer working partnership. Included are their recommendations to improve performance.

Modeling methodology for supply chain synthesis and disruption analysis

Science.gov (United States)

Wu, Teresa; Blackhurst, Jennifer

2004-11-01

The concept of an integrated or synthesized supply chain is a strategy for managing today's globalized and customer driven supply chains in order to better meet customer demands. Synthesizing individual entities into an integrated supply chain can be a challenging task due to a variety of factors including conflicting objectives, mismatched incentives and constraints of the individual entities. Furthermore, understanding the effects of disruptions occurring at any point in the system is difficult when working toward synthesizing supply chain operations. Therefore, the goal of this research is to present a modeling methodology to manage the synthesis of a supply chain by linking hierarchical levels of the system and to model and analyze disruptions in the integrated supply chain. The contribution of this research is threefold: (1) supply chain systems can be modeled hierarchically (2) the performance of synthesized supply chain system can be evaluated quantitatively (3) reachability analysis is used to evaluate the system performance and verify whether a specific state is reachable, allowing the user to understand the extent of effects of a disruption.

Ethics of Information Supply.

Science.gov (United States)

Oppenheim, Charles

This discussion of the ethics of the information process provides a brief review of the process of information supply and flow, primarily in science and technology; looks at various points in the flow of information; and highlights particular ethical concerns. Facets of the process discussed in more detail include ways in which some scientists…

The electricity supply industry in Queensland, financial report 1982/83

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

This fourth financial report deals with the finances of the electricity supply industry and includes three sections. Section 1: letter to the minister; scope of the report; the Commission; the electricity authorities; forecasts; tariff policy; and the Queensland Electricity Supply Industry Superannuation Board. Section 2: consolidated schedules; and audited financial statements. Section 3: statistics; including production, distribution, consumption, financial, accidents, towns and locations.

Making Supply Chains Resilient to Floods Using a Bayesian Network

Science.gov (United States)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and

Intelligent Decision Support and Big Data for Logistics and Supply Chain Management

DEFF Research Database (Denmark)

Voss, Stefan; Sebastian, Hans-Jürgen; Pahl, Julia

2017-01-01

Intelligent Decision Support and Big Data for Logistics and Supply Chain Management” features theoretical developments, real-world applications and information systems related to solving decision problems in logistics and supply chain management. Methods include optimization, heuristics, metaheur......Intelligent Decision Support and Big Data for Logistics and Supply Chain Management” features theoretical developments, real-world applications and information systems related to solving decision problems in logistics and supply chain management. Methods include optimization, heuristics......, metaheuristics and matheuristics, simulation, agent technologies, and descriptive methods. In a sense, we were and are representing the future of logistics over the years....

Supply Chain Management og Supply Chain costing

DEFF Research Database (Denmark)

Nielsen, Steen; Mortensen, Ole

2002-01-01

Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

Southwest British Columbia natural gas supply and deliverability: Discussion paper

International Nuclear Information System (INIS)

1994-02-01

A review is presented of energy in British Columbia, the role of natural gas, and options available to enhance gas supply security in the province's most densely populated area, the southwest. British Columbia has abundant natural gas supplies, and production exceeds domestic demand. In 1992, natural gas supplied ca 25% of total provincial end-use energy requirements, but this share is expected to rise to 30% by 2015. Although some say that the province's natural gas production and transmission system should serve only domestic needs, this would have significant negative impacts. Domestic gas supply policy allows gas consumers to contract their own supplies, but contract security is required. Provincial guidelines allow demand-side programs to compete with supply sources to ensure that the resource profile is achieved at least cost. In the southwest, natural gas demand is projected to increase from 189 PJ in 1991 to 262 PJ by 2005. Most gas supplied to this region comes from northeast British Columbia through pipelines that are generally fully contracted. Short-term deliverability can be a problem, especially in peak winter demand periods. The gas industry's contingency plans for shortages are outlined and alternatives to enhance deliverability to the southwest are assessed, including storage, expansion of the pipeline system, supply curtailment, and peaking supply contracts. Aspects of provincial natural gas planning are discussed, including security of supply and deliverability, economic and environmental impacts, consumer costs, safety, and the public interest. A least-cost option for enhancing deliverability (underground storage and an additional liquefied natural gas plant) is estimated to cost consumers $3.69/GJ over 20 years. 9 figs., 1 tab

Sustainable Power Supply Solutions for Off-Grid Base Stations

Directory of Open Access Journals (Sweden)

Asma Mohamad Aris

2015-09-01

Full Text Available The telecommunication sector plays a significant role in shaping the global economy and the way people share information and knowledge. At present, the telecommunication sector is liable for its energy consumption and the amount of emissions it emits in the environment. In the context of off-grid telecommunication applications, off-grid base stations (BSs are commonly used due to their ability to provide radio coverage over a wide geographic area. However, in the past, the off-grid BSs usually relied on emission-intensive power supply solutions such as diesel generators. In this review paper, various types of solutions (including, in particular, the sustainable solutions for powering BSs are discussed. The key aspects in designing an ideal power supply solution are reviewed, and these mainly include the pre-feasibility study and the thermal management of BSs, which comprise heating and cooling of the BS shelter/cabinets and BS electronic equipment and power supply components. The sizing and optimization approaches used to design the BSs’ power supply systems as well as the operational and control strategies adopted to manage the power supply systems are also reviewed in this paper.

Natural Hazards and Supply Chain Disruptions

Science.gov (United States)

Haraguchi, M.

2016-12-01

Natural hazards distress the global economy through disruptions in supply chain networks. Moreover, despite increasing investment to infrastructure for disaster risk management, economic damages and losses caused by natural hazards are increasing. Manufacturing companies today have reduced inventories and streamlined logistics in order to maximize economic competitiveness. As a result, today's supply chains are profoundly susceptible to systemic risks, which are the risk of collapse of an entire network caused by a few node of the network. For instance, the prolonged floods in Thailand in 2011 caused supply chain disruptions in their primary industries, i.e. electronic and automotive industries, harming not only the Thai economy but also the global economy. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and the Earthquake in Kumamoto Japan in 2016. This study attempts to discover what kind of effective measures are available for private companies to manage supply chain disruptions caused by floods. It also proposes a method to estimate potential risks using a Bayesian network. The study uses a Bayesian network to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains such as logistics, multiple layers of suppliers, warehouses, and consumer markets. Considering situations across different times, our study shows desirable data requirements for the analysis and effective measures to improve Value at Risk (VaR) for private enterprises and supply chains.

Power supply for magnetic coils in thermonuclear devices

International Nuclear Information System (INIS)

Shimada, Ryuichi; Tamura, Sanae; Kishimoto, Hiroshi.

1981-01-01

Purpose: To decrease the load fluctuations in an external power supply, as well as to increase the operation efficiency capacity of thermonuclear devices. Constitution: Electrical power with the same frequency as that of a dynamo generator is supplied by a power supply-driving power source including a frequency converter and the like to DC converters for driving plasma-exciting and -controlling coils. At the same time, the electrical power from the frequency converter is supplied to the dynamo generator with flywheel to add accumulate energies to the EC converters. Accordingly, the energy for the great power pulses in a short time comprises the sum of the energy supplied from the dynamo generator with flywheel and the energy supplied continuously from the outside to eliminate the need of providing a stand-by period for the re-acceleration of the dynamo generator with flywheel even if the scale of the thermonuclear device is enlarged and energy consumed in one cycle is increased, whereby the decrease in the operation efficiency can be prevented and the capacity of the flywheel can be reduced. (Yoshino, Y.)

Including solar energy in the local heat supply of the Goettingen city works; Einbindung von Sonnenenergie in die Nahwaermeversorgung der Stadtwerke Goettingen AG

Energy Technology Data Exchange (ETDEWEB)

Tepe, R. [ISFH - Institut fuer Solarenergieforschung Hameln-Emmerthal GmbH, Emmerthal (Germany); Schreitmueller, K.R. [ISFH - Institut fuer Solarenergieforschung Hameln-Emmerthal GmbH, Emmerthal (Germany); Vanoli, K. [ISFH - Institut fuer Solarenergieforschung Hameln-Emmerthal GmbH, Emmerthal (Germany)

1996-11-01

The research project `Solar local heat Goettingen` was started in 1992 in which, by including a 785 m{sup 2} flat collector plant in the return of the local heat supply of the Goettingen City Works; the potential of the combined system of solar plant and conventional heat supply system is to be proved. The size of the collector plant and inclusion in an existing local heat network promised an advantageous combination due to appreciably lower investment costs (lower collector installation costs) and savings in system technique, reduced operating costs, and higher income due to favourable operating conditions with even low collector operating temperatures and reduced piping losses. In parallel with this system, the Goettingen City Works installed an air collector plant which is used to preheat the combustion air taken to the conventional burners. (orig./HW) [Deutsch] Es entstand im Jahr 1992 das Forschungsvorhaben `Solare Nahwaerme Goettingen`, in dem durch die Einbindung einer 785 m{sup 2} grossen Flachkollektoranlage in den Ruecklauf der Nahwaermeversorgung der Stadtwerke Goettingen AG das Potential der Systemkombination Solaranlage und konventionelle Waermeversorgungssystem nachgewiesen werden sollte. Die Groesse der Kollektoranlage sowie die Einbindung in ein bestehendes Nahwaermenetz versprachen eine vorteilhafte Kombination aufgrund - deutlich geringerer Investionskosten (geringe Kollektorinstallationskosten sowie Einsparungen bei der Systemtechnik); - reduzierter Betriebskosten; - hoher Ertraege durch guenstige Betriebsbedingungen wie gleichbleibend niedriger Kollektorbetriebstemperaturen und reduzierter Leitungsverluste. Parallel zu diesem System installierten die Stadtwerke Goettingen AG eine Luftkollektoranlage, die der Vorwaermung der den konventionellen Brennern zugefuehrten Verbrennungsluft dient. (orig./HW)

Supply disruption cost for power network planning

International Nuclear Information System (INIS)

Kjoelle, G.H.

1992-09-01

A description is given of the method of approach to calculate the total annual socio-economic cost of power supply disruption and non-supplied energy, included the utilities' cost for planning. The total socio-economic supply disruption cost is the sum of the customers' disruption cost and the utilities' cost for failure and disruption. The mean weighted disruption cost for Norway for one hour disruption is NOK 19 per kWh. The customers' annual disruption cost is calculated with basis in the specific disruption cost referred to heavy load (January) and dimensioning maximum loads. The loads are reduced by factors taking into account the time variations of the failure frequency, duration, the loads and the disruption cost. 6 refs

Issue on supply chain of renewable energy

International Nuclear Information System (INIS)

Cucchiella, Federica; D’Adamo, Idiano

2013-01-01

Highlights: • One of the most relevant debates, is related to energy and environmental issue. • The development of renewable energy usage is due to several factors. • Indeed challenges from a supply chain point of view are required. • Thorough survey on topics of supply chain and renewable energy has been conducted. • Findings are discussed against the backdrop of SCs as sustainable RE option. - Abstract: Actually, one of the most relevant debates, among both citizens that government, is related to energy and environmental issue. The development of renewable energy usage is due to several factors such as the political strategic decisions and geographical situation. Indeed the high development of renewable energies requires challenges from a supply chain point of view. In this paper, a thorough survey of the extant literature on the topic of supply chain (SC) and renewable energy (RE) has been conducted. English papers published on international peer-reviewed journals from 2003 to 2013 have been considered. Sustainable Supply Chain Management (SSCM) resolves the duality between environmental, economic and social aspects. Sustainable manufacturing practices play an essential role in promoting renewable energy development and commercialization; this will require significant changes to the industry’s traditional Supply Chain Management and business model. The aim of the paper is investigate literature insights useful to increase the performance and overcome barriers to the RE supply chain development. Like many typical supply chains, also supply chain related to RE includes elements such as: physical, information, and financial flows. The present research is useful to individualize characteristics of a RE supply chain. Moreover, the research is useful improve the performance of RE supply chain in some aspects like: • better control supply chain costs to make renewable energy more affordable; • manage supply chain to address weakened demand in the near

Optimization and decision support systems for supply chains

CERN Document Server

Corominas, Albert; Miranda, João

2017-01-01

This contributed volume presents a collection of materials on supply chain management including industry-based case studies addressing petrochemical, pharmaceutical, manufacturing and reverse logistics topics. Moreover, the book covers sustainability issues, as well as optimization approaches. The target audience comprises academics, industry managers, and practitioners in the field of supply chain management, being the book also beneficial for graduate students.

Seven Fundamental Economic Characteristics Exclusivity of Agrifood Supply Chains (part 2

Directory of Open Access Journals (Sweden)

Thomas L. Sporleder

2013-12-01

Full Text Available This analysis focuses on defining and describing the unique economic characteristics of agrifood supply chains. The analysis includes seven specific economic characteristics of agrifood supply chains that distinguish them from other industrial manufacturing and service supply chains. The seven characteristics are: 1 risk emanating from the biological nature of agrifood supply chains, 2 the role of buffer stocks within the supply chain, 3 the scientific foundation of innovation in production agriculture having shifted from chemistry to biology, 4 cyberspace and information technology influences on agrifood supply chains, 5 the prevalent market structure at the farm gate remains oligopsony, 6 relative market power shifts in agrifood supply chains away from food manufacturers downstream to food retailers, and 7 globalization of agriculture and agri- food supply chains.

The Use of Supply Chains and Supply Chain Management in the ...

African Journals Online (AJOL)

Dr Peter Schmitz

supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

Supply chain integration in the South African conveyancing environment

Directory of Open Access Journals (Sweden)

Anthea P. Amadi-Echendu

2016-05-01

Full Text Available Background: Although conveyancing is a legal term, business management and specifically operations management principles also apply to the processes involved in conveyancing. From a business perspective, each organisation is usually concerned with its own profit margins and processes. In our global market, however, organisations now realise that they can no longer compete successfully on the basis of their internal operational efficiencies alone. They are therefore constantly aware of the need to improve not only their internal processes but also their alignment with other supply chain linkages in an effort to optimise the performance of the whole supply chain. Such alignment, in the conveyancing environment, includes government departments that are generally less willing to adopt business principles, which in turn makes optimisation of the whole supply chain more difficult. Objectives: The article describes a supply chain perspective of the conveyancing processes in South Africa and reports some of the factors that influence and delay conveyancing transactions. It explores possibilities of collaborative relationships between different role players in the conveyancing supply chain. It aims to show that a supply chain approach, as opposed to a singular organisational approach, can help to reduce process bottlenecks and delays in order to improve overall process efficiency. Method: The research, on which the findings are based, was exploratory in nature and followed a mixed-methods (quantitative or qualitative approach and included both structured questionnaires and personal interviews. Results: The results of the study revealed that many different types of delays occur at various entities across the whole supply chain involved in property transfers. These delays are presented in a table and diagram. Conclusion: It is recommended that greater adoption of electronic technology across the whole supply chain would improve overall efficiency

Prospects for development of heat supply systems in high-rise districts

Science.gov (United States)

Zhila, Viktor; Solovyeva, Elena

2018-03-01

The article analyzes the main advantages and disadvantages of centralized and decentralized heat supply systems in high-rise districts. The main schemes of centralized heat supply systems are considered. They include centralized heat supply from boiler houses, centralized heat supply from autonomous heat sources, heat supply from roof boiler houses and door-to-door heating supply. For each of these variant, the gas distribution systems are considered and analyzed. These systems vary depending on the heat source location. For each of these systems, technical and economic indicators are taken into account, the analysis of which allows choosing the best option for districts where high-rise buildings predominate.

Energy supply. Energieversorgung

Energy Technology Data Exchange (ETDEWEB)

Eickhof, N.

1983-01-01

This anthology presents nine papers dealing with the following subjects: 1) international and national aspects of energy supply, 2) regional and local energy supply concepts, and 3) issues of district-heat supply. Each of the nine papers was entered separately.

Troubleshooting of signal power supply system for Shanghai metro line 7

Science.gov (United States)

Lu, Kaixia; Xiao, Jie

2018-03-01

With the rapid development of Urban Rail Transit Signal Technology, the demand of signal power supply system for signal equipment is higher and higher. The signal intelligent power supply panel is the main component of the urban rail traffic signal power supply system. Whether the intelligent power supply panel working or not is directly related to traffic safety. The maintenance of intelligent signal power supply panel is particularly important. Line 7 of Shanghai Metro adopts PMZG Signal Intelligent Power Supply Panel, which is produced by Beijing Jinyujiaxin Polytron Technologies Inc. Maintenance of power supply system mainly includes routine maintenance and troubleshooting. This article will make clear the routine maintenance contents of PMZG Signal Intelligent Power Supply Panel, and put forward the common fault information and troubleshooting methods of PMZG Signal Intelligent Power Supply Panel. In accordance with the steps of fault handling, the faults can be eliminated in the shortest possible time, and PMZG Signal Intelligent Power Supply Panel can be quickly restored to normal working state.

Capacity Credit and Security of Supply

DEFF Research Database (Denmark)

Chozas, Julia Fernandez; Mathiesen, Brian Vad

2015-01-01

electricity systems are planned, and how renewable energies fit in these systems. The second part of the article assesses the actual contribution that variable renewable energies can make to security of supply, firstly from a qualitative point of view and secondly in measurable terms. The study is based......This paper addresses the question of how renewable energies can contribute to security of supply. In order to analyse this subject, the paper has two differentiated parts. In the first part, the concept of security of supply is reviewed. This provides the baseline to understand how current...... demand for electricity is highest, the study focuses on the capacity credit of future Danish scenarios including high penetrations of offshore wind, onshore wind, wave and solar PV. The results of this project can ultimately lead towards the improvement of existing rules and methods in system planning...

Supply of nuclear materials

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-07-15

Any large-scale atomic energy programme is inherently dependent on the availability of materials that can be used as fuel in reactors, and the International Atomic Energy Agency, at its inception, was intended to act as a bank for the flow of materials between Member States. According to its Statute, one of its primary functions is to provide materials 'to meet the needs of research on, and development and practical application of, atomic energy for peaceful purposes, including the production of electric power, with due consideration for the needs of the under-developed areas of the world'. If the Agency is to fulfil its Statutory function, it would be essential for it to have not only some ready sources of supply, but also an established framework of general terms and conditions on which it could secure the supplies. The latter would eliminate the need for going through elaborate procedural formalities whenever the Agency receives a new request for materials. Such a framework has now been established with the signing of broad agreements with three countries which had offered to supply various quantities of special fissionable materials to the Agency. These agreements, signed in Vienna on 11 May 1959, with the USSR, the UK and the USA, lay down the basic terms and conditions on which these three countries will make nuclear materials available when needed by the Agency. The USSR has agreed to make available to the Agency 50 kg of uranium-235, the UK 20 kg and the USA 5 000 kg. The material will be supplied in the form of enriched uranium in any concentration up to 20 per cent; the amounts mentioned relate to the 235-isotope content of the materials. The UK and the USA have agreed that the parties to a particular supply agreement may decide on higher enrichment of uranium to be used for research reactors, material testing reactors or for other research purposes. The USA has also agreed to make available to the Agency such additional supplies as would match in amount

Petroleum supply monthly, March 1999, with data for January 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

OpenAIRE

Radanliev, Petar

2015-01-01

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR)

OpenAIRE

Rizki Wahyuniardi; Moh. Syarwani; Ryan Anggani

2017-01-01

PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR) approach. The initial hierarchy model of performance measurement is tailored to the company's condi...

Winners and losers in the complex web of global supply chains.

Science.gov (United States)

Glendon, Lee

2013-01-01

This paper discusses how supply chain, risk and business continuity professionals can collaboratively address the consequences of increasing supply chain complexity in order to deliver both resilient and sustainable supply chains. The paper identifies the key drivers of complexity supported by recent case examples, including the equine DNA scandal and the Rana Plaza tragedy in Bangladesh.

Supply chain integration and performance : the moderating effect of supply complexity

NARCIS (Netherlands)

Giménez, C.; van der Vaart, T.; van Donk, D.P.

2012-01-01

Purpose - The purpose of this paper is to investigate the effectiveness of supply chain integration in different contexts. More specifically, it aims to show that supply chain integration is only effective in buyer-supplier relationships characterised by high supply complexity.

Modeling sustainability in renewable energy supply chain systems

Science.gov (United States)

Xie, Fei

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate "environmental thinking" into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain under uncertainties. All models are mixed integer programs, which also involves multi-objective programming method and two-stage/multistage stochastic programming methods. In particular for the long-term sequential planning under uncertainties, to reduce the computational challenges due to the exponential expansion of the scenario tree, I also developed efficient ND-Max method which is more efficient than CPLEX and Nested Decomposition method. Through result analysis of four independent studies, it is found that the proposed modeling frameworks can effectively improve the economic performance, enhance environmental benefits and reduce risks due to systems uncertainties for the biofuel supply chain systems.

Proactive Supply Chain Performance Management with Predictive Analytics

Directory of Open Access Journals (Sweden)

Nenad Stefanovic

2014-01-01

Full Text Available Today’s business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators. Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.

Proactive supply chain performance management with predictive analytics.

Science.gov (United States)

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.

Proactive Supply Chain Performance Management with Predictive Analytics

Science.gov (United States)

Stefanovic, Nenad

2014-01-01

Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment. PMID:25386605

APS power supply controls

International Nuclear Information System (INIS)

Saunders, C.W.; Despe, O.D.

1994-01-01

The purpose of this document is to provide comprehensive coverage of the APS power supply control design. This includes application software, embedded controller software, networks, and hardware. The basic components will be introduced first, followed by the requirements driving the overall design. Subsequent sections will address each component of the design one by one. Latter sections will address specific applications

Will blockchain technology revolutionize excipient supply chain management?

OpenAIRE

Shireesh Apte; Nikolai Petrovsky

2016-01-01

Blockchain technology provides a major advance for excipient supply chains, assisting in the delivery of unadulterated, source, process and transit verifiable excipients (or APIs and drug products), but does not alleviate the necessity for quality audits. The adoption of blockchain technology should make the process faster and make the transactional record more robust and reliable, however other rate-limiting steps of the excipient supply chain including transit ...

Developing green supply chain management strategies: A taxonomic approach

Directory of Open Access Journals (Sweden)

Michael Mutingi

2013-06-01

Full Text Available Purpose: The objective of this research is to explore the empirical green supply chain activities found in literature, and to develop a taxonomic framework that can be used for formulating appropriate strategies for green supply chains, based on characteristic dimensions for the green supply chain. Design/methodology/approach: The taxonomic framework is developed through (i analysis of green supply chain activities found in existing empirical work or case studies recorded in literature, (ii identification of key dimensions that influence green supply chain management strategies, and (iii development of a taxonomic scheme for selecting or developing green strategies. Findings: The paper finds that this study yielded: a set of three characteristic dimensions that influence strategic green supply chain management, and a guided structured approach selecting appropriate green strategies, providing managerial insights. Research limitations/implications: This paper shows that future work includes development of specific performance management indices according to the taxonomy of green strategies developed in this study. Practical implications: This research provided a practical guided approach that enhances appropriate formulation of green strategies for green supply chain management, while providing sound managerial insights for the supply chain decision maker. The choice of supply chain strategy directly impacts the overall environmental, economic and operations performance of the supply chain. Originality/value: This study presents to supply chain decision makers a new taxonomic framework that simplifies and enhances the formulation of green strategies, and to researchers a comparative understanding of various strategies applicable to green supply chains.

High performance magnet power supply optimization

International Nuclear Information System (INIS)

Jackson, L.T.

1975-01-01

Three types of magnet power supply systems for the joint LBL-SLAC proposed accelerator PEP are discussed. The systems considered include a firing circuit and six-pulse controlled rectifier, transistor systems, and a chopper system. (U.S.)

Supply chain management under fuzziness recent developments and techniques

CERN Document Server

Öztayşi, Başar

2014-01-01

Supply Chain Management Under Fuzziness presents recently developed fuzzy models and techniques for supply chain management. These include: fuzzy PROMETHEE, fuzzy AHP, fuzzy ANP, fuzzy VIKOR, fuzzy DEMATEL, fuzzy clustering, fuzzy linear programming, and fuzzy inference systems. The book covers both practical applications and new developments concerning these methods. This book offers an excellent resource for researchers and practitioners in supply chain management and logistics, and will provide them with new suggestions and directions for future research. Moreover, it will support graduate students in their university courses, such as specialized courses on supply chains and logistics, as well as related courses in the fields of industrial engineering, engineering management and business administration.

On incentives for assurance of petroleum supply

International Nuclear Information System (INIS)

Osmundsen, Petter; Aven, Terje; Tomasgard, Asgeir

2010-01-01

Assurance of supply is a crucial objective for producers and consumers of oil and gas. A basic requirement to meet this objective is that producers and transmitters have sufficient economic incentives and capabilities to assure a desired degree of supply. The topic of this paper is to evaluate these incentives from a broad perspective. We examine economic trade-offs inherent in a delay of production, including reputational issues, as well as contract incentives for gas sellers, drilling companies, and oil service companies.

IEA Response System for Oil Supply Emergencies

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-12-15

Emergency response to oil supply disruptions has remained a core mission of the International Energy Agency since its founding in 1974. This information pamphlet explains the decisionmaking process leading to an IEA collective action, the measures available -- focusing on stockdraw -- and finally, the historical background of major oil supply disruptions and the IEA response to them. It also demonstrates the continuing need for emergency preparedness, including the growing importance of engaging key transition and emerging economies in dialogue about energy security.

IEA Response System for Oil Supply Emergencies

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-15

Emergency response to oil supply disruptions has remained a core mission of the International Energy Agency since its founding in 1974. This information pamphlet explains the decisionmaking process leading to an IEA collective action, the measures available -- focusing on stockdraw -- and finally, the historical background of major oil supply disruptions and the IEA response to them. It also demonstrates the continuing need for emergency preparedness, including the growing importance of engaging key transition and emerging economies in dialogue about energy security.

Environmental Retail Supply Chains

DEFF Research Database (Denmark)

Kotzab, Herbert; Munch, Hilde; de Faultrier, Birgitte

2011-01-01

which were grouped into eight categories; they refer to “fundamental environmental attitude”, “use of energy”, “use of input material”, “product”, “packaging”, “transport”, “consumption” and “waste”. The level of environmental supply chain management can be characterised as very operational and very...... short-term oriented (green operations). Long-term oriented green design initiatives were hardly observed. Furthermore, the specific environmental activities of three retailers from Denmark, France and the UK were compared. Research limitations/implications – The empirical study investigates supply chain...... operations of retailers and excludes other areas of retail management. The results are based on material that is published by the respective companies and thus do not include internal reports. Originality/value – The main contribution of this paper is to test the proposition that global retailers follow...

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR

Directory of Open Access Journals (Sweden)

Rizki Wahyuniardi

2017-12-01

Full Text Available PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR approach. The initial hierarchy model of performance measurement is tailored to the company's condition to measure its supply chain performance, while the normalization of Snorm De Boer serves to equalize the value of the matrix used as the measurement indicator. The level of importance of performance attributes is measured by weighting with subjective questionnaires. Value of performance attribute obtained reliability 19,74, responsiveness 16,91, agility 11,00; and asset management 12.26. The total performance score of 59.90. This value indicates that the performance of the supply chain is in an average position.

Effective food supply chains : generating, modelling and evaluating supply chain scenarios

NARCIS (Netherlands)

Vorst, van der J.G.A.J.

2000-01-01

Logistical co-ordination in FMCG supply chains

The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to

48 CFR 831.7001-3 - Books, supplies, and equipment required to be personally owned.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Books, supplies, and... PROCEDURES Contract Cost Principles and Procedures 831.7001-3 Books, supplies, and equipment required to be personally owned. (a) Reimbursement for supplies (including books, equipment, or other supplies) will be made...

Quality assurance in nuclear fuel element component supply

International Nuclear Information System (INIS)

Jenkins, B.P.

1987-01-01

The paper describes the application of Quality Assurance to nuclear fuel element component supply. The Quality Assurance programme includes integrated procurement, purchasing, surveillance and receipt inspection functions. Purchasing policy is based on a consistent preference for competitive tendering. Multiple sourcing is used to encourage competitive pricing and increase security of supply. A receipt inspection facility is maintained to ensure the high product quality levels demanded by the nuclear industry. (U.K.)

Reduced Toxicity Fuel Satellite Propulsion System Including Fuel Cell Reformer with Alcohols Such as Methanol

Science.gov (United States)

Schneider, Steven J. (Inventor)

2001-01-01

A reduced toxicity fuel satellite propulsion system including a reduced toxicity propellant supply for consumption in an axial class thruster and an ACS class thruster. The system includes suitable valves and conduits for supplying the reduced toxicity propellant to the ACS decomposing element of an ACS thruster. The ACS decomposing element is operative to decompose the reduced toxicity propellant into hot propulsive gases. In addition the system includes suitable valves and conduits for supplying the reduced toxicity propellant to an axial decomposing element of the axial thruster. The axial decomposing element is operative to decompose the reduced toxicity propellant into hot gases. The system further includes suitable valves and conduits for supplying a second propellant to a combustion chamber of the axial thruster, whereby the hot gases and the second propellant auto-ignite and begin the combustion process for producing thrust.

Integrated Water Basin Management Including a Large Pit Lake and a Water Supply Reservoir: The Mero-Barcés Basin

Science.gov (United States)

Delgado, Jordi; Juncosa-Rivera, Ricardo; Hernández-Anguiano, Horacio; Muñoz-Ibáñez, Andrea

2016-04-01

Water resource managers attempt to minimize conflicts among users, preserve the environment as much as possible, and satisfy user necessities at a minimum cost. Several European directives indirectly address mine restoration policies, with a goal of minimizing negative impacts and adding social and environmental value where possible. Water management must consider water sources, ecological flows, flood control, and variability in the demands for urban, industrial, and agricultural uses. In the context of the present study, the city of A Coruña is located in Galicia (NW Spain). The water supply system for this city and surrounding municipalities (~400.000 inhabitants) is based on the Abegondo-Cecebre reservoir. In cases when precipitation is scarce (e.g. no rain for more than seven consecutive months) and there is a seasonal increase in demand significantly stress the supply system so that, as occurred in 2010, shortages and water supply restrictions need to be considered. This is a clear indication of that, at present, the Abegondo-Cecebre reservoir has not enough capacity to cope with a scenario of increasing water demand (due to the vegetative and seasonal increase of population) and hydric stress likely connected with the widely acknowledged climate change. In the present context of monetary resources scarcity and society concern with respect large new public work projects, the construction of a new dam is challenging. However the opportunity provided by the recent flooding of the Meirama open pit (a large mine void that has been forced-flooded for its reclamation and it is located in the headwaters of one of the rivers draining towards the Abegondo-Cecebre reservoir) proves to be a significant new asset that will help to improve the future water management scenarios under the acknowledged uncertain conditions. In this study we have studied in detail the hydrochemistry of the affected systems (lake, river and reservoir) in order to make clear whether or not the

Supply chain analysis of e-tailing versus retailing operation - a case study

Science.gov (United States)

Kumar, Sameer; Tiffany, Maryellen; Vaidya, Salil

2016-07-01

The swift growth of e-commerce or e-tailing as a consumer retail channel has made it a serious competitor to traditional retail channels and is changing consumers' purchasing behaviour. The purpose of this case study, based on Target and Amazon.com, is to analyse the attributes of traditional retailing, e-tailing, and hybrid supply chain models to form conclusions about the feasibility of an idealised supply chain model for the future. An integrated and generalised modelling framework is used that incorporates Six Sigma - define, measure, analyse, improve, control methodology leveraging various tools, including process flow maps, cause and effect diagram, performance efficiency metrics, failure mode and effects analysis (FMEA), and Monte Carlo simulation. Based on this analysis and research, the conclusion is that the idealised supply chain of the future may evolve into a hybrid supply chain, which includes both e-tail and retail channels. The main recommendations from this study include assessing the risks of migrating to such a hybrid supply chain and to leverage the recommended actions provided in the hybrid FMEA. To facilitate more effective and mature processes, this study can guide researchers in exhaustive empirical evaluations of hybrid supply chains, gather experiences and lessons learned for practitioners.

North American natural gas supply dynamics: A focus on U.S. supply

International Nuclear Information System (INIS)

George, R.

1999-01-01

This paper discusses US natural gas supply dynamics in the context of the North American gas marketplace. Supply fundamentals are examined, methodology is briefly presented, regional supply outlooks are discussed. Assumptions, drivers and issues are highlighted. The analysis and outlook indicate that the sizeable North American resource base can be economically developed to supply growing US natural gas requirements. The major incremental supply sources are likely to come from deepwater Gulf of Mexico, Rocky Mountain regions, onshore Texas and imports from Canada. Given this outlook, major business and investment opportunities exist for the gas upstream and midstream sectors despite some short-term challenges

Effects of health insurance on labour supply: A systematic review

NARCIS (Netherlands)

Quynh, Nga Le Thi; Groot, Wim; Tomini, Sonila M.; Tomini, Florian

2017-01-01

This study provides a systematic review of empirical evidence on the labour supply effects of health insurance. The outcomes in the 63 studies reviewed include labour supply in terms of hours worked and the probability of employment, self-employment and the level of economic formalisation. One of

Supply Chain Collaboration Alternatives: Understanding the Expected Costs and Benefits.

Science.gov (United States)

McLaren, Tim; Head, Milena; Yuan, Yufei

2002-01-01

Discusses collaboration as a recent trend in supply chain management (SCM) that focuses on joint planning, coordination, and process integration between suppliers, customers, and other partners in a supply chain. Analyzes alternative information systems approaches for supporting collaborative SCM, including phone, fax, or email systems; Web-based…

Supply chain challenges. building relationships.

Science.gov (United States)

Beth, Scott; Burt, David N; Copacino, William; Gopal, Chris; Lee, Hau L; Lynch, Robert Porter; Morris, Sandra

2003-07-01

Supply chain management is all about software and systems, right? Put in the best technology, sit back, and watch as your processes run smoothly and the savings roll in? Apparently not. When HBR convened a panel of leading thinkers in the field of supply chain management, technology was not top of mind. People and relationships were the dominant issues of the day. The opportunities and problems created by globalization, for example, are requiring companies to establish relationships with new types of suppliers. The ever-present pressure for speed and cost containment is making it even more important to break down stubbornly high internal barriers and establish more effective cross-functional relationships. The costs of failure have never been higher. The leading supply chain performers are applying new technology, new innovations, and process thinking to far greater advantage than the laggards, reaping tremendous gains in all the variables that affect shareholder value: cost, customer service, asset productivity, and revenue generation. And the gap between the leaders and the losers is growing in almost every industry. This roundtable gathered many of the leading thinkers and doers in the field of supply chain management, including practitioners Scott Beth of Intuit, Sandra Morris of Intel, and Chris Gopal of Unisys. David Burt of the University of San Diego and Stanford's Hau Lee bring the latest research from academia. Accenture's William Copacino and the Warren Company's Robert Porter Lynch offer the consultant's perspectives. Together, they take a wide-ranging view of such topics as developing talent, the role of the chief executive, and the latest technologies, exploring both the tactical and the strategic in the current state of supply chain management.

Supply Chain Collaboration Roles of Interorganizational Systems, Trust, and Collaborative Culture

CERN Document Server

Cao, Mei

2013-01-01

To survive and thrive in the competition, firms have strived to achieve greater supply chain collaboration to leverage the resources and knowledge of suppliers and customers.  Internet based technologies, particularly interorganizational systems, further extend the firms’ opportunities to strengthen their supply chain partnerships and share real-time information to optimize their operations.  Supply Chain Collaboration: Roles of Interorganizational Systems, Trust, and Collaborative Culture explores the nature and characteristics, antecedents, and consequences of supply chain collaboration from multiple theoretical perspectives.  Supply Chain Collaboration: Roles of Interorganizational Systems, Trust, and Collaborative Culture conceptualizes supply chain collaboration as seven interconnecting elements including information sharing, incentive alignment, goal congruence, decision synchronization, resource sharing, as well as communication and joint knowledge creation. These seven components define the occur...

Analysis of uranium supply to 2050

International Nuclear Information System (INIS)

Underhill, D.H.

2002-01-01

The 1999 uranium mine production was about 55% of the 61 500 tonnes uranium (t U) used by the nuclear industry, with the balance met by secondary supply. Based on a recent WEC-IIASA study which defines a wide range of possible future levels of nuclear electricity generation, it is estimated that by 2050 annual uranium requirements could increase to 177 000 and 283 000 t U respectively, in the mid and high cases, or fall to 52 000 t U in the low case. Cumulative requirements to 2050 for the low, mid and high cases are, respectively 3.39, 5.35 and 7.58 million t U. A new IAEA analysis describes how known uranium resources (RAR and EAR-1) plus undiscovered resources (EAR-II and SR), supplemented by secondary supplies, could be utilized to supply reactors to 2050. Secondary supplies include: existing inventories, blended down warhead material (LEU blended from HEU), MOX, Repu, and re-enrichment of tails. The methodology of this analysis estimates the amounts and annual deliveries of the secondary supply, plus non-market supply. The balance of demand is met from Market Based Production (MBP) or: 'Uranium produced at or below market price to satisfy requirements not met by other supply sources'. The analysis then evaluates the production role for 125 uranium deposits, which supply MBP considering individual deposit resources, production cost and capability, and timing. Production costs are classified from low ( $130/kgU). Annual supply and demand balancing is used to allocate the resources on an individual deposit basis, assuming use of the next lowest available cost production. Secondary supplies will continue to supplement mine production to about 2025, but their relative importance will decrease over the period. An analysis of the benefit of lowering the enrichment tails assay from 0.30% 235 U to 0.15% 235 U, when economically justified is also discussed. The report also discusses projected production cost trends to 2025 under the mid and high cases. The final

Spatial adjustments of mountain channels to changes in the sediment supply regime

Science.gov (United States)

Elgueta, M. A.; Hassan, M. A.; von Flotow, C. M.

2012-12-01

Sediment supply is a key controlling factor in bed morphology and sediment mobility. Under a low supply regime, bed structuring develops and reduces sediment mobility. Under high supply, structuring is suppressed and the bed exhibits patchiness. This study examines the spatial response of a mountain stream channel to changes in the sediment supply regime. To achieve this goal, a flume experiment was conducted in the Mountain Channel Hydraulic Experimental Laboratory at the University of British Columbia. An 18 meter long, one meter wide flume, with a slope of three percent was used. Seven continuous runs were conducted. Each of them lasted 40 hours, under constant flow and different sediment supply regimes, which included no feed, constant feed and episodic supply. In each run, bed elevation, bed grain size distribution, flow resistance, sediment mobility and degree of armoring were determined. Flume results were compared to field data from a 600 meter channel reach that exhibits rapid, riffle-pool and step-pool morphology in UBC Malcolm Knapp Research Forest. The study gave the possibility to analyze in detail the spatial adjustment of a mountain channel to changes in the sediment supply regime, including episodic inputs.

Petroleum Supply Monthly, September 1990. [Contains glossary

Energy Technology Data Exchange (ETDEWEB)

Whited, D.; Jacobus, P. (eds.)

1990-11-28

Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

Petroleum supply monthly, October 1990. [Contains Glossary

Energy Technology Data Exchange (ETDEWEB)

1990-12-27

Data presented in this report describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 54 tabs.

Petroleum supply monthly, September 1995 with data for July 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-27

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Petroleum supply monthly, May 1995 with data for March 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-25

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Petroleum Supply Monthly, March 1996 (with data for January 1996)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-04

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

Supply regimes in fisheries

DEFF Research Database (Denmark)

Nielsen, Max

2006-01-01

Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extremes......, the traditional understanding of supply regimes in fisheries needs modification. This paper identifies through a case study of the East Baltic cod fishery supply regimes in fisheries, taking alternative fisheries management schemes and mesh size limitations into account. An age-structured Beverton-Holt based bio......-economic supply model with mesh sizes is developed. It is found that in the presence of realistic management schemes, the supply curves are close to vertical in the relevant range. Also, the supply curve under open access with mesh size limitations is almost vertical in the relevant range, owing to constant...

Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

OpenAIRE

Radanliev, P

2015-01-01

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

Strategic orientation in evaluation of supply chain activities

Directory of Open Access Journals (Sweden)

Javad sofiyabadi

2012-08-01

Full Text Available Employment of supply chain management could impact the entire functional and practical aspects of industry and services positively and change the manager’s attitude toward the implementation of supply chain management systems from a cost-oriented attitude to an enabling attitude towards better activities with other chain members. Yet still many organizations do not have the required vision within the identification of strategic appropriate measure in implementation, evaluation and usage of proper benchmarks to attain an integrated chain. Constantly supply chain management activity can be introduced as a tied up with strategic level of organization. Hence, it is a necessary with an overall strategic approach to identify the criteria, which enable us to include the whole process level of chain, financial matter of chain activities, visible and invisible properties, human activity and turn all these activities into an integrated approach to resolve supply chain difficulties. In this paper, we present an integrated balanced score card combined with DEMATEL technique to prioritize different alternatives for supply chain implementation.

Integrated supply chain risk management

OpenAIRE

Riaan Bredell; Jackie Walters

2007-01-01

Integrated supply chain risk management (ISCRM) has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly ...

Principles of Selection, Implementation and Utilization of RFID in Supply Chain Management

Directory of Open Access Journals (Sweden)

Juraj Vaculik

2009-01-01

Full Text Available The paper deals with RFID (Radio Frequency Identificationimplementation and utilization within supply chain managementand also includes the economic feasibility of rollingout RFID. The members of the supply chain networks- suppliers,manufacturers and distributors - will operate independentlyfrom one another and according to their own agendas.This type of unmanaged network, howeve1; results in inefficiencies.The manufacturer might have a goal of maximizing productionin order to minimize unit costs. Clearly, all members ofthe supply chain stand to gain by coordinating their efforts toimprove efficiency and overall supply chain performance. Thisarticle is divided into three parts: Supply chain, Economic feasibilityof rolling out RFID and Processes of Supply chain management.

Petroleum supply monthly, April 1998, with data for February 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-04-01

The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and District of Columbia), 5 PAD Districts and 12 Refining Districts. 16 figs., 56 tabs.

Future directions conventional oil supply, Western Canada

International Nuclear Information System (INIS)

Campbell, G.R.; Hayward, J.

1997-01-01

The history of the Canadian oil industry was briefly sketched and the future outlook for crude oil and natural gas liquids in western Canada was forecast. The historical review encompassed some of the significant events in history of the Canadian oil industry, including the Leduc discovery in 1947, the Swan Hills discovery in 1957, the start of commercial production from the Athabasca oil sands in 1967, the discovery of the Hibernia oilfield offshore Newfoundland in 1979, and the onset of the use of horizontal production wells in western Canada in 1987. The resource base, supply costs, and the technology that is being developed to reduce costs and to improve recovery, were reviewed. Future oil prices were predicted, taking into account the costs associated with technological developments. It was suggested that the character of the industry is undergoing a change from an industry dominated by conventional supply to a mixed industry with increasing volume of heavy oil, primary bitumen, synthetic oil and frontier supply replacing 'conventional' light crude oil. Projections into the future are subject to uncertainty both on the supply as well as on the demand side. The potential impact of technology can significantly affect demand, and technological developments can yield additional supplies which exceed current expectations. 10 figs

An innovational application of digital power supply controller on SSRF dynamic power supply

International Nuclear Information System (INIS)

Chen Huanguang; Li Rui; Guo Chunlong; Shen Tianjian; Li Deming

2008-01-01

Control structure of dynamic power supply using PSI controller in SLS and Diamond is introduced. For designing dynamic power supply using PSI controller in the booster of SSRF, an innovative application of PSI digital power supply controller has been developed. In the commissioning of SSRF, the dynamic power supplies performed perfectly. (authors)

Supply chain reliability modelling

Directory of Open Access Journals (Sweden)

Eugen Zaitsev

2012-03-01

Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

Don't break the chain: importance of supply chain management in the operating room setting.

Science.gov (United States)

Bilyk, Candis

2008-09-01

Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed preprocessing supply system designs

Energy Technology Data Exchange (ETDEWEB)

Muth, jr., David J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Langholtz, Matthew H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jacobson, Jacob [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schwab, Amy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Argo, Andrew [Sundrop Fuels, Golden, CO (United States); Brandt, Craig C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cafferty, Kara [Idaho National Lab. (INL), Idaho Falls, ID (United States); Chiu, Yi-Wen [Argonne National Lab. (ANL), Argonne, IL (United States); Dutta, Abhijit [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eaton, Laurence M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Searcy, Erin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-03-31

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advances in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to

Water stress, water salience, and the implications for water supply planning

Science.gov (United States)

Garcia, M. E.; Islam, S.

2017-12-01

Effectively addressing the water supply challenges posed by urbanization and climate change requires a holistic understanding of the water supply system, including the impact of human behavior on system dynamics. Decision makers have limits to available information and information processing capacity, and their attention is not equally distributed among risks. The salience of a given risk is higher when increased attention is directed to it and though perceived risk may increase, real risk does not change. Relevant to water supply planning is how and when water stress results in an increased salience of water risks. This work takes a socio-hydrological approach to develop a water supply planning model that includes water consumption as an endogenous variable, in the context of Las Vegas, NV. To understand the benefits and limitations of this approach, this model is compared to a traditional planning model that uses water consumption scenarios. Both models are applied to project system reliability and water stress under four streamflow and demographic scenarios, and to assess supply side responses to changing conditions. The endogenous demand model enables the identification of feedback between both supply and demand management decisions on future water consumption and system performance. This model, while specific to the Las Vegas case, demonstrates a prototypical modeling framework capable of examining water-supply demand interactions by incorporating water stress driven conservation.

Water supply studies. [management and planning of water supplies in California

Science.gov (United States)

Burgy, R. H.; Algazi, V. R.; Draeger, W. C.; Churchman, C. W.; Thomas, R. W.; Lauer, D. T.; Hoos, I.; Krumpe, P. F.; Nichols, J. D.; Gialdini, M. J.

1973-01-01

The primary test site for water supply investigations continues to be the Feather River watershed in northeastern California. This test site includes all of the area draining into and including the Oroville Reservoir. The principal effort is to determine the extent to which remote sensing techniques, when properly employed, can provide information useful to those persons concerned with the management and planning of lands and facilities for the production of water, using the Oroville Reservoir and the California Water Project as the focus for the study. In particular, emphasis is being placed on determining the cost effectiveness of information derived through remote sensing as compared with that currently being derived through more conventional means.

Prognostic Health Management for Avionics System Power Supplies

National Research Council Canada - National Science Library

Orsagh, Rolf; Brown, Douglas; Roemer, Michael; Dabney, Thomas; Hess, Andrew

2005-01-01

This paper presents an integrated approach to switching mode power supply health management that implements techniques from engineering disciplines including statistical reliability modeling, damage...

The Path to a Reliable Supply of Medical Radioisotopes

International Nuclear Information System (INIS)

Gas, Serge; Westmacott, Chad; Cameron, Ron; Lokhov, Alexey

2011-06-01

Medical imaging techniques using technetium-99m account for roughly 80% of all nuclear medicine procedures, representing over 30 million examinations worldwide every year. Disruptions in the supply chain of these medical isotopes - which have half-lives of 66 hours for molybdenum-99 ( 99 Mo) and 6 hours for technetium-99m ( 99m Tc), and thus must be produced continually - can lead to cancellations or delays in important medical testing services. Unfortunately, supply reliability has declined over the past decade, due to unexpected or extended shutdowns at the few ageing, 99 Mo-producing, research reactors and processing facilities. These shutdowns have created global supply shortages. At the request of its member countries, the OECD Nuclear Energy Agency (NEA) established the High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) in 2009. During its two-year mandate, the HLG-MR assessed the factors rendering the supply chain vulnerable and identified practical measures - near, medium and long term - to ensure the security of supply of this important medical isotope. Building on its findings and assessments, the HLG-MR developed a comprehensive policy approach to encourage long-term supply security of 99 Mo/' 99m Tc, detailing the essential steps to be taken by governments, industry and the health community to address the vulnerabilities within the supply chain, including changing an economic structure that does not support or reinforce reliable supply

New Industrial Park Energy Supply (NIPES): a method of efficiently supplying energy to a community of industrial users

International Nuclear Information System (INIS)

1984-08-01

The New Industrial Park Energy Supply (NIPES) concept allows the use of coal by small as well as large industrial users. The NIPES concept consists of a system of Energy Supply Stations groups of cogeneration plants) and steam transmission lines that supplies process heat and electricity to multiple existing and/or new users in an industrial park(s) setting. The Energy Supply Stations grow along with the industrial park(s) as new industries are attracted by a reliable reasonably priced energy source. The growth of the Energy Supply Stations over a period of years allows the introduction of new energy sources and technologies as they become established. This report describes the generic NIPES concept and the results of the evaluation of a specific NIPES system for the Lake Charles, Louisiana, area. A ten-year process steam load growth scenario is developed including both new and existing industrial users. During the initial years of the growth scenario, process steam is supplied to the industrial users by several coal-fired plants. Later, as the process steam load develops, a two-unit nuclear plant is integrated into the specific NIPES system. An evaluation is also performed for a NIPES system consisting of all coal-fired plants. The specific NIPES system is compared to: (1) individual user owned oil-fired facilities for existing industrial users; and (2) individual user owned coal-fired facilities for new industrial plants. A financial analysis is performed to determine the total economic advantages associated with the NIPES system: savings in a steam costs for industrial users, potential return on investment for investors

New Industrial Park Energy Supply (NIPES): a method of efficiently supplying energy to a community of industrial users

Energy Technology Data Exchange (ETDEWEB)

1984-08-01

The New Industrial Park Energy Supply (NIPES) concept allows the use of coal by small as well as large industrial users. The NIPES concept consists of a system of Energy Supply Stations groups of cogeneration plants) and steam transmission lines that supplies process heat and electricity to multiple existing and/or new users in an industrial park(s) setting. The Energy Supply Stations grow along with the industrial park(s) as new industries are attracted by a reliable reasonably priced energy source. The growth of the Energy Supply Stations over a period of years allows the introduction of new energy sources and technologies as they become established. This report describes the generic NIPES concept and the results of the evaluation of a specific NIPES system for the Lake Charles, Louisiana, area. A ten-year process steam load growth scenario is developed including both new and existing industrial users. During the initial years of the growth scenario, process steam is supplied to the industrial users by several coal-fired plants. Later, as the process steam load develops, a two-unit nuclear plant is integrated into the specific NIPES system. An evaluation is also performed for a NIPES system consisting of all coal-fired plants. The specific NIPES system is compared to: (1) individual user owned oil-fired facilities for existing industrial users; and (2) individual user owned coal-fired facilities for new industrial plants. A financial analysis is performed to determine the total economic advantages associated with the NIPES system: savings in a steam costs for industrial users, potential return on investment for investors.

Comparison of series regulated neutral beam accel supplies with shunt regulated accel supplies

International Nuclear Information System (INIS)

Baker, W.; Smith, B.H.

1976-01-01

This study was undertaken to get a direct comparison between comparable series and shunt regulated power supplies. It is intended that the two supplies will be strictly equivalent with the same safety factors in the design of each type and the cost estimates made on the same basis. The series regulated power supply is simply a scaled up version of the 2XIIB Accel Supplies. Each supply provides 150 kV, 65 ampere, 500 ms pulse output such as will be used on the TFTR sources. The shunt regulated power supply uses high reactance transformers to provide the series impedance for the shunt regulator. The most significant difference in the performance of the two types of power supplies is that the shunt regulated supply has a minimum interrupt period of 16 ms, whereas the series regulated supply can have about 0.5 ms. Even this difference can be eliminated with a commutator circuit such as is being developed in Berkeley for the 150 kV, 20 ampere system. The 16 ms period is probably not a very serious limitation because it still permits up to 31 interrupts per 500 ms pulse. The shunt regulated system appears to be about 37 percent less expensive than the series system

Optimal inventory policies with non-stationary supply disruptions and advance supply information

NARCIS (Netherlands)

Atasoy, B.; Güllü, R.; Tan, T.

2012-01-01

We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages – and hence supply disruption to (some of) her customers

Optimal inventory policies with non-stationary supply disruptions and advance supply information

NARCIS (Netherlands)

Atasoy, B.; Güllü, R.; Tan, T.

2011-01-01

We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages -and hence supply disruption to (some of) her customers-

Supply chain performance attributes for the fast moving consumer goods industry

Directory of Open Access Journals (Sweden)

Madhu Bala

2011-11-01

Full Text Available This research paper identifies the supply chain performance attributes that are relevant to the Fast Moving Consumer Goods (FMCG industry. The FMCG supply chains are analysed from the perspective of processes, components and typology. The typical issues faced by the FMCG supply chains are also explored. Three supply chain operational models are compared and identify SCOR as the one best suited for the FMCG industry. The survey, conducted with the respondents from four research cases across two product categories, demonstrates the acceptance and the usage of the performance attributes for the FMCG supply chains. The results also include the analysis of the typology of the research cases across two product categories.

Integrated supply chain risk management

Directory of Open Access Journals (Sweden)

Riaan Bredell

2007-11-01

Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

The use of the Six Sigma concept in supply logistics

Directory of Open Access Journals (Sweden)

Agnieszka Szmelter

2012-12-01

Full Text Available This paper aims to present Six Sigma as one of the concepts of business process improvement, including logistics processes. Firstly, the author presents the role of information logistics and controlling to improve the efficiency of supply logistics. Then, she focuses on the characteristics of Six Sigma, including Lean Management philosophy, and identifies the connection between logistics and this methodology. She also presents an example of using the Six Sigma tools in the process of supply in a chosen company.

Power supply in future: ecological aspects

International Nuclear Information System (INIS)

Hustedt, M.

2000-01-01

The most important prerequisites for an ecological supply of energy in the future is the opting out of nuclear energy and the completion of the second and third phase of the socio-ecological tax reform. As a part of our energy will continue to be generated on the basis of fossil fuels in the foreseeable future, it is essential that a radical change takes place in the efficiency of fossil energy engineering. In addition to this, any possible energy-saving potential must be exploited; this includes the new energy-saving law, promoting the modernisation of old buildings and modern energy management (heat insulation, heating engineering, warm water heating etc.). For an ecological power supply the share of renewable energies must be increased to form a major pillar of our power supply. The '100,000-roof' programme of the German federal government and the development programme for near-market renewable energy sources form part of this approach. Energy research should shift its orientation and accelerate the conversion of our power supply: priority should be given to developing energy-saving technologies and renewable energy. Supporting municipalities and public utilities is especially important. This means revising the basic conditions of energy laws so that they assist public utilities to face competition as power utilities. (orig.) [de

Conceptual design and simulation of HL-2A RMP coils power supply

International Nuclear Information System (INIS)

Ren Qinghua; Wang Yingqiao; Li Qing

2015-01-01

The conceptual design and simulation of HL-2A resonant magnet perturbation (RMP) coils power supply are introduced, including its power supply topology, the selection of basic units and its control modes. The RMP coils will be energized by DC power supply with the amplitude up to 4 kA, or AC power supply with maximum amplitude up to 4 kA with adjustable frequency up to 1 kHz. Though choosing the sound power supply topology and its control modes, the RMP coils power supply can meet the requirements of both fast response and low current ripple to satisfy the ELM control and minimize adverse effects on plasma control as far as possible. (authors)

Supply chain components

OpenAIRE

Vieraşu, T.; Bălăşescu, M.

2011-01-01

In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Interplanetary Supply Chain Risk Management

Science.gov (United States)

Galluzzi, Michael C.

2018-01-01

Emphasis on KSC ground processing operations, reduced spares up-mass lift requirements and campaign-level flexible path perspective for space systems support as Regolith-based ISM is achieved by; Network modeling for sequencing space logistics and in-space logistics nodal positioning to include feedstock. Economic modeling to assess ISM 3D printing adaption and supply chain risk.

Risikobasiertes Supply-Chain-Management

DEFF Research Database (Denmark)

Wieland, Andreas; Schinz, Philipp

2015-01-01

Das Management erlebt seit einigen Jahren dahingehend einen Paradigmenwechsel, dass nicht mehr Unternehmen als einzelne autonome Einheiten im Wettbewerb zueinander stehen, sondern die Supply Chains, in denen diese Unternehmen eingebunden sind. Ursachen hierfür sind beispielsweise die Auslagerung...... von Nicht-Kernprozessen auf vorgelagerte Stufen der Supply Chain oder auf Supply-Chain-Dienstleister sowie die Internationalisierung der Beschaffung. Dieser Paradigmenwechsel hat traditionelles Denken in den Schranken des Systems „Unternehmen“ abgelöst und zum Supply- Chain-Denken geführt, das vor......- und nachgelagerte Stufen des Systems „End-to-End-Supply-Chain“ einbezieht, etwa auch die Lieferanten von Lieferanten....

IFLA General Conference, 1989. Pre-Session Seminar on Interlending and Document Supply. Papers.

Science.gov (United States)

International Federation of Library Associations, The Hague (Netherlands).

The papers in this compilation address topics relating to interlending and document supply and include the following: (1) "Training in Interlending" (D. E. K. Wijasuriya, Malaysia); (2) "Resource Collections and Document Supply Centre" (Stephney Ferguson, Jamaica); (3) "Organizing for Interlibrary Loan and Document Supply" (Rodrick S. Mabomba);…

Supply Chain Management Practices in Toy Supply Chains

DEFF Research Database (Denmark)

Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

2005-01-01

Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

Understanding your supply chain to reduce the risk of supply chain disruption.

Science.gov (United States)

Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

2012-01-01

Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

A Mathematical Approach to Supply Complexity Management Efficiency Evaluation for Supply Chain

Directory of Open Access Journals (Sweden)

Changhee Kim

2015-01-01

Full Text Available This study aims to identify the factors of complexity due to the globalization of supply chain and to measure the management efficiency of the factors which cause the supply complexity within supply chain. This study conducts an analysis to utilize linear programming and bootstrapping, targeting 12 Korean companies among the selected companies in Fortune Global 500. According to the results from the analysis, 4 companies with relatively high management efficiency of the factors which cause the supply complexity and 8 companies with relatively low management efficiency are found. The research findings reveal that public companies with the small number of products, factories, and providers relatively manage the supply complexity compared to private companies. Moreover, this study suggests projection point as a direction for relatively less efficient companies and excess quantity of input which should reduce for its achievement. This study also has an implication to establish a further standard of efficiency to manage the supply complexity for companies.

Petroleum supply monthly, October 1991. [Contains glossary

Energy Technology Data Exchange (ETDEWEB)

1991-10-30

Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

Many-objective optimization and visual analytics reveal key trade-offs for London's water supply

Science.gov (United States)

Matrosov, Evgenii S.; Huskova, Ivana; Kasprzyk, Joseph R.; Harou, Julien J.; Lambert, Chris; Reed, Patrick M.

2015-12-01

In this study, we link a water resource management simulator to multi-objective search to reveal the key trade-offs inherent in planning a real-world water resource system. We consider new supplies and demand management (conservation) options while seeking to elucidate the trade-offs between the best portfolios of schemes to satisfy projected water demands. Alternative system designs are evaluated using performance measures that minimize capital and operating costs and energy use while maximizing resilience, engineering and environmental metrics, subject to supply reliability constraints. Our analysis shows many-objective evolutionary optimization coupled with state-of-the art visual analytics can help planners discover more diverse water supply system designs and better understand their inherent trade-offs. The approach is used to explore future water supply options for the Thames water resource system (including London's water supply). New supply options include a new reservoir, water transfers, artificial recharge, wastewater reuse and brackish groundwater desalination. Demand management options include leakage reduction, compulsory metering and seasonal tariffs. The Thames system's Pareto approximate portfolios cluster into distinct groups of water supply options; for example implementing a pipe refurbishment program leads to higher capital costs but greater reliability. This study highlights that traditional least-cost reliability constrained design of water supply systems masks asset combinations whose benefits only become apparent when more planning objectives are considered.

Performa Supply Chain Emping Melinjo di Kabupaten Bantul Daerah Istimewa Yogyakarta

Directory of Open Access Journals (Sweden)

Eni Istiyanti

2017-07-01

Full Text Available Emping melinjo was one of the agroindustry-products that had great potential to be developed. The industry of emping melinjo contributed more on economic growth in the reason of creating jobs and alleviate poverty. The purpose of this study was to describe the performance of supply chain of emping melinjo from upstream to downstream and analyze the efficiency of supply chain of emping melinjo in Bantul regency. Field study to obtain primary data was done through interviews with the practitioners of emping melinjo supply chain (including farmers and merchants of melinjo as well as producers and retailers of melinjo chips. The results of field studies then tabulated and analyzed descriptively and quantitatively using Linear Programming. The analysis showed that there were 37 supply chain networks of emping melinjo in Bantul. The practitioners of upstream supply chain were melinjo farmers, middlemen, traders, wholesalers, and retailers, while in the downstream, were emping melinjo producers, traders, small traders, wholesalers, retailers and consumers. The activities of the doer of emping melinjo supply chain includes purchasing, sales, harvesting, packaging, packing, stripping, storage, loading and unloading, transporting, sorting and grading. The flow of products and money in the supply chain of emping melinjo run smoothly, while the flow of information was sluggish. Based on linear programming analysis the cost of supply chain of emping melinjo would reach minimum level at Rp33,969,264 per week if the production of emping melinjo as many as 25 361 kg per week wich was distributed using 22 networks.

15 CFR 754.3 - Petroleum products not including crude oil.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum products not including crude... SUPPLY CONTROLS § 754.3 Petroleum products not including crude oil. (a) License requirement. As indicated... required to all destinations, including Canada, for the export of petroleum products, excluding crude oil...

Research on the Optimization of Agricultural Supply Chain Based on Internet of Things

OpenAIRE

Zhang , Guangsheng

2013-01-01

International audience; Technology of IOT which used in agricultural supply chain can help to improve operational efficiency and reduce supply chain costs. This paper analyzes the basic structure of agricultural supply chain, current status of the research, and summarizes major obstacles of the development process. The paper also describes application of IOT principle, as well as agricultural supply chain optimization approach based on internet of things, including agricultural production, pr...

Strategy to Enhance International Supply Chain Security

National Research Council Canada - National Science Library

2007-01-01

.... at 1901, 1903, October 13, 2006) which require the development of a strategic plan to enhance the security of the international supply chain, including protocols for the expeditious resumption of the flow of trade following...

10 CFR 600.324 - Supplies.

Science.gov (United States)

2010-01-01

... unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate value and the... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.324 Section 600.324 Energy DEPARTMENT OF... Supplies. (a) Title vests in the recipient upon acquisition of supplies acquired with Federal funds under...

32 CFR 34.24 - Supplies.

Science.gov (United States)

2010-07-01

... shall retain any unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 34.24 Section 34.24 National Defense... § 34.24 Supplies. (a) Title shall vest in the recipient upon acquisition for supplies acquired with...

Security of feedstocks supply for future bio-ethanol production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2010-01-01

This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. - Research highlights: →Bioethanol in Thailand derived from molasses, cassava, sugarcane juice could yield reductions of 64%, 49% and 87% in GHGs when compared to conventional gasoline. →High yields improvement are required for a reliable and sufficient supply of molasses, cassava and sugarcane to satisfy the long-term demands for bio-ethanol and other related industries. →Other factors to enhance long-term security of feedstocks supply for sustainable bioethanol production in Thailand include increasing use of sugarcane juice as feedstock and promoting production of bioethanol derived from agricultural residues.

Petroleum supply monthly, December 1998 with data for October 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. 82 tabs.

Supply chain components

Directory of Open Access Journals (Sweden)

Vieraşu, T.

2011-01-01

Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Air/fuel supply system for use in a gas turbine engine

Science.gov (United States)

Fox, Timothy A; Schilp, Reinhard; Gambacorta, Domenico

2014-06-17

A fuel injector for use in a gas turbine engine combustor assembly. The fuel injector includes a main body and a fuel supply structure. The main body has an inlet end and an outlet end and defines a longitudinal axis extending between the outlet and inlet ends. The main body comprises a plurality of air/fuel passages extending therethrough, each air/fuel passage including an inlet that receives air from a source of air and an outlet. The fuel supply structure communicates with and supplies fuel to the air/fuel passages for providing an air/fuel mixture within each air/fuel passage. The air/fuel mixtures exit the main body through respective air/fuel passage outlets.

Supply chain performance: the role of regional markets

Directory of Open Access Journals (Sweden)

Ali Ghasemi

2015-05-01

Full Text Available This paper investigates the role of exports in the regional markets on the performance of supply chain. The study first determines critical variables affecting exports for entering into the regional markets and then measures the effects of these variables on the effectiveness of supply chain performance. The study uses two questionnaires, one for measuring the effects of various factors on export development and the other for measuring supply chain performance in Likert scale. Cronbach alpha for the mentioned questionnaires were calculated as 0.84 and 0.78, respectively. The population of the survey includes all small and medium enterprises active in city of Tehran, Iran and the study selects a sample of 250 people as a sample size. Using factor analysis, the study has determined seven factors including product development, government support, strategic orientation, customer satisfaction, competitive pressures, organizational capability and distribution strategies for entry into regional markets. In addition, the implementation of structural equation modeling has disclosed that product development and distribution strategies maintained the highest impact on export activities.

Heat supply of the town of Trnava from EBO nuclear plant

International Nuclear Information System (INIS)

Kovarik, Z.

4 variants of central heat supply from the V-2 Bohunice nuclear power plant were considered. Three included the supply of hot water while the fourth envisaged the supply of steam. The variants of hot water supply differed in the proportion of heat supply during load peak, the range being from 75% to 88% to 100%. The system suggested considers hot water with a maximum overpressure of 2.5 MPa and temperature of 150/70 degC, with possible temporary decrease to 130/70 degC. The estimated power of heat exchange stations is 240 MW at a temperature gradient of 150/70 degC and 180 MW at a temperature gradient 130/70 degC. The location, design and control of the heat supply system and the specifications of heat generation facilities are given. (J.P.)

Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

OpenAIRE

Templar, Simon; Hofmann, Erik; Findlay, Charles

2016-01-01

Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

An innovative container supply chain for forest chips

Energy Technology Data Exchange (ETDEWEB)

Karttunen, Kalle; Korpinen, Olli-Jussi; Laettilae, Lauri; Foehr, Jarno; Ranta, Tapio [Lappeenranta Univ. of Technology, Mikkeli (Finland)], e-mail: kalle.karttunen@lut.fi

2012-11-01

Most forest chips are transported by trucks with a solid frame. Forest-chip volumes will at least double before 2020, which means longer transport distances from the supply areas to the largest demand sites in Finland. The study concentrates on an innovative container solution based on a channel composite structure, creating a lighter, temperature-isolated, and more durable structure. In addition to the structural benefits, the container includes an innovative supply chain with a beneficial handling operation, interchangeability and maximising of the payload capacity, resulting in an energy- and cost-efficient solution. This innovative-container-based supply chain for forest chips has been studied via cost analysis, GIS analysis, and discrete-event simulation methods. The purpose of the study was to compare a truck of interchangeable containers with solid-frame trucks. The option of interchangeable containers allows combining truck logistics with other modes of transport, such as trains and waterways. The study showed the cost-efficiency potential of container truck logistics, stemming from the cost and payload savings and the supply-chain productivity advantages over solid-frame trucks. The innovative solution for interchangeable-container logistics is an option for large-scale supply of forest chips.

Petroleum supply monthly, May 1999, with data for March 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary supplies of petroleum products in the US (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

The Supply of Medical Radioisotopes. Implementation of the HLG-MR Policy Approach: Results from a Self-assessment by the Global 99Mo/'99mTc Supply Chain

International Nuclear Information System (INIS)

Peykov, Pavel; Cameron, Ron

2013-03-01

At the request of its member countries, OECD/NEA became involved in global efforts to ensure a secure supply of 99 Mo and ' 99m Tc. Since June 2009, the NEA and its High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) examined the causes of supply shortages and developed a policy approach, including principles and supporting recommendations to address those causes. The 'Economic Study' of the molybdenum-99 ( 99 Mo) and technetium-99m (' 99m Tc) supply chain published by the NEA clearly demonstrated that the pricing structure at nuclear research reactors prior to the most recent supply shortage in 2009-10 was not economically sustainable. Host nations traditionally subsidised the cost of irradiation services for 99 Mo production, along with experimental research at reactors. With a move away from subsidising 99 Mo production that often benefits foreign nations or foreign companies, pricing must recover the full cost of production to ensure economic sustainability and a long-term secure supply of medical isotopes. Appropriate pricing would also encourage an efficient use of the product, reducing wasted 99 Mo/' 99m Tc and thus reducing excess production and the associated radioactive waste. A key principle adopted by the HLG-MR was that all producers should move towards full-cost recovery and should implement the other principles adopted by the group. In February 2012, the NEA web-published a guidance document with a methodology for full- cost recovery and an associated Excel spreadsheet. This costing methodology identifies the essential elements that should be included when determining the full cost of 99 Mo irradiation services and how these elements should be allocated between various missions in the case of multipurpose facilities. The application of the costing methodology at all 99 Mo/' 99m Tc-producing research reactors and other production technology facilities within the global supply chain will ensure a common approach to full

The United States rheumatology workforce: supply and demand, 2005-2025.

Science.gov (United States)

Deal, Chad L; Hooker, Roderick; Harrington, Timothy; Birnbaum, Neal; Hogan, Paul; Bouchery, Ellen; Klein-Gitelman, Marisa; Barr, Walter

2007-03-01

To develop and apply a model that allows prediction of current and future supply and demand for rheumatology services in the US. A supply model was developed using the age and sex distribution of current physicians, retirement and mortality rates, the number of fellowship slots and fill rates, and practice patterns of rheumatologists. A Markov projection model was used to project needs in 5-year increments from 2005 to 2025. The number of rheumatologists for adult patients in the US in 2005 is 4,946. Male and female rheumatologists are equally distributed up to age 44; above age 44, men predominate. The percent of women in adult rheumatology is projected to increase from 30.2% in 2005 to 43.6% in 2025. The mean number of visits per rheumatologist per year is 3,758 for male rheumatologists and 2,800 for female rheumatologists. Assuming rheumatology supply and demand are in equilibrium in 2005, the demand for rheumatologists in 2025 is projected to exceed supply by 2,576 adult and 33 pediatric rheumatologists. The primary factors in the excess demand are an aging population which will increase the number of people with rheumatic disorders, growth in the Gross Domestic Product, and flat rheumatology supply due to fixed numbers entering the workforce and to retirements. The productivity of younger rheumatologists and women, who will make up a greater percentage of the future workforce, may also have important effects on supply. Unknown effects that could influence these projections include technology advances, more efficient practice methods, changes in insurance reimbursements, and shifting lifestyles. Current data suggest that the pediatric rheumatology workforce is experiencing a substantial excess of demand versus supply. Based on assessment of supply and demand under current scenarios, the demand for rheumatologists is expected to exceed supply in the coming decades. Strategies for the profession to adapt to this changing health care landscape include increasing

U.S. healthcare fix: leveraging the lessons from the food supply chain.

Science.gov (United States)

Kumar, Sameer; Blair, John T

2013-01-01

U.S. healthcare costs consistently outpace inflation, causing growing problems of affordability. This trend cannot be sustained indefinitely. The purpose of this study is to use supply-chain tools for macro-level examination of the U.S. healthcare as a business system and identify options and best use practices. We compare the important and successful U.S. food industry to the essential but problematic U.S. healthcare industry. Supply chain strategies leading to food business operations success are examined and healthcare applications suggested. We emphasize "total cost of ownership" which includes all costs incurred by all stakeholders of U.S. healthcare, including maintenance and cleanup, not just the initial purchase price. U.S. hospitals and clinics can use supply chain strategies in a total cost of ownership framework to reduce healthcare costs while maintaining patient care quality. Supply chain strategies of resource pooling, mass customization, centralized logistics, specialization, postponement and continuous improvement that have been successfully used in the U.S. food industry should be more widely applied to the U.S. healthcare industry. New and growing areas of telemedicine and medical tourism should be included in the supply chain analysis of U.S. healthcare. Valid statistical analysis of results in all areas of U.S. healthcare is an important part of the process. U.S. healthcare industry problems are systematic operational and supply chain problems rather than problems with workforce or technology. Examination of the U.S. healthcare industry through a supply chain framework should lead to significant operational improvement in both prevention and treatment of acute and chronic ailments. A rational and unemotional reorganization of the U.S. healthcare system operations, using supply chain strategies, should help reduce healthcare costs while maintaining quality and increasing accessibility.

The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

DEFF Research Database (Denmark)

Møller, Charles

2006-01-01

in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs

Energy Technology Data Exchange (ETDEWEB)

David J. Muth, Jr.; Matthew H. Langholtz; Eric C. D. Tan; Jacob J. Jacobson; Amy Schwab; May M. Wu; Andrew Argo; Craig C. Brandt; Kara G. Cafferty; Yi-Wen Chiu; Abhijit Dutta; Laurence M. Eaton; Erin M. Searcy

2014-08-01

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advances in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to

The current and perspective problems of nuclear power fuel supply

International Nuclear Information System (INIS)

Solonin, M.I.; Konovalov, I.I.

2003-01-01

Conception of fuel supply is comprised of supplying of natural uranium resources, nuclear fuel production including engineering stages of refining, enriching, production, use of secondary uranium and plutonium raw materials. The structure of nuclear fuel cycle is considered. Enterprises of the Russian nuclear fuel cycle, world recourses and fundamental producers of uranium are performed, demands in natural uranium of Russian and frontier NPP to 2010 are demonstrated. Dynamics of the development of separate methods - diffusion and centrifugal is presented as well as parameters of fuel supply at Russian and frontier NPP are compared [ru

Business Processes Improvement in e-Supply Chains

Directory of Open Access Journals (Sweden)

Dragana Rejman Petrovic

2016-12-01

Full Text Available The development of a model to improve business processes in e-supply chains involves the use of a process approach to and a methodology for information systems development and includes the definition of the requirement, logical key process modeling with the defined information flow within the logical subsystem, logical data modeling, the logical network and data distribution modeling, and the logical interface modeling in order to meet different users´ needs. In doing so, a variety of methods and techniques for the different development stages of management information systems are used, namely: the business process management, the business process performance management and the analytic hierarchy process as a method for multiple-criteria decision making. This paper analyzes business processes and different types of supply chains in the automotive industry, as the representative of complex systems. Based on the selected key business processes and key performance indicators of business processes, the analytic hierarchy process model is developed, followed by their optimization. The result is the management information system model intended to improve the key business processes in e-supply chains. The research results show that the performance improvement of business processes in e-supply chains, the application of the model to improve the key business processes and the application of Web-based information and communication solutions affect the efficiency and quality of e-supply chains.

Sustainable Fashion Supply Chain: Lessons from H&M

Directory of Open Access Journals (Sweden)

Bin Shen

2014-09-01

Full Text Available Sustainability is significantly important for fashion business due to consumers’ increasing awareness of environment. When a fashion company aims to promote sustainability, the main linkage is to develop a sustainable supply chain. This paper contributes to current knowledge of sustainable supply chain in the textile and clothing industry. We first depict the structure of sustainable fashion supply chain including eco-material preparation, sustainable manufacturing, green distribution, green retailing, and ethical consumers based on the extant literature. We study the case of the Swedish fast fashion company, H&M, which has constructed its sustainable supply chain in developing eco-materials, providing safety training, monitoring sustainable manufacturing, reducing carbon emission in distribution, and promoting eco-fashion. Moreover, based on the secondary data and analysis, we learn the lessons of H&M’s sustainable fashion supply chain from the country perspective: (1 the H&M’s sourcing managers may be more likely to select suppliers in the countries with lower degrees of human wellbeing; (2 the H&M’s supply chain manager may set a higher level of inventory in a country with a higher human wellbeing; and (3 the H&M CEO may consider the degrees of human wellbeing and economic wellbeing, instead of environmental wellbeing when launching the online shopping channel in a specific country.

A Dynamic Stackelberg Game of Supply Chain for a Corporate Social Responsibility

Directory of Open Access Journals (Sweden)

Massimiliano Ferrara

2017-01-01

Full Text Available In this paper, we establish a dynamic game to allocate CSR (Corporate Social Responsibility to the members of a supply chain. We propose a model of a supply chain in a decentralized state which includes a supplier and a manufacturer. For analyzing supply chain performance in decentralized state and the relationships between the members of the supply chain, we formulate a model that crosses through multiperiods with the help of a dynamic discrete Stackelberg game which is made under two different information structures. We obtain an equilibrium point at which both the profits of members and the level of CSR taken up by supply chains are maximized.

Supply Cain Risk Management

OpenAIRE

Goodwin, Les

2011-01-01

“The management of supply chain risk is crucial to any business, more so to Rolls Royce who face an almost doubling of load within the next 10 years. So what is supply chain risk management and how well is it deployed within an operational business of Rolls Royce? What are the tools and techniques available and what are the key issues around implementing world class supply chain risk management with a Supply Chain Unit within Rolls Royce?”

Infrastructure, Attitude and Weather: Today’s Threats to Supply Chain Security

Directory of Open Access Journals (Sweden)

Stephen Blank

2016-06-01

Full Text Available The global economy can be viewed today as a myriad of border-crossing supply chain networks of production, supply, distribution and marketing systems. Given the enormous value embodied in these systems, and an environment increasingly characterized by uncertainty and vulnerability, it is not surprising that concern about supply chain security has intensified. Concern takes many forms. For example, how supply chains might be used as vehicles for criminal activity (smuggling, trafficking of narcotics and importing counterfeit goods or acts of terrorism (radio-active materials, bombs, even nukes in containers. Technology-based threats to supply chains, such as cybercrimes, data breaches and IT failures, now appear more frequently in the literature on supply chain security. These threats could result in substantial disruption to supply chains and damage to companies and their customers.Clima But larger storms are brewing, whose menace to supply chain security is greater still – and where actions to protect supply chains move more slowly. These include the continued deterioration of transportation infrastructure, a new posture on trade which views supply chains as threats to jobs and wages, and the impact of climate change. These threats do not lie off in the distant future; they are threats of today and tomorrow.

The triple-A supply chain.

Science.gov (United States)

Lee, Hau L

2004-10-01

Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

Long-term trends in U.S. gas supply and prices: 1991 edition of the GRI baseline projection of U.S. energy supply and demand to 2010, April 1991. Gas research insights

International Nuclear Information System (INIS)

Woods, T.J.

1991-04-01

The report summarizes the gas supply and price outlook in the 1991 Edition of the GRI Baseline Projection of U.S. Energy Supply and Demand. Projected U.S. gas production, gas imports, and other sources of gas supply are discussed along with the sensitivity of the outlook to changes in price expectations. The critical uncertainties and issues affecting the gas supply and price outlook are discussed. Appendixes include a comparison of the 1991 and the 1989 projections of gas supply and price trends; and a description of the GRI Hydrocarbon Model

Alternative supply specifications and estimates of regional supply and demand for stumpage.

Science.gov (United States)

Kent P. Connaughton; David H. Jackson; Gerard A. Majerus

1988-01-01

Four plausible sets of stumpage supply and demand equations were developed and estimated; the demand equation was the same for each set, although the supply equation differed. The supply specifications varied from the model of regional excess demand in which National Forest harvest levels were assumed fixed to a more realistic model in which the harvest on the National...

Increasing Capacity Exploitation in Food Supply Chains Using Grid Concepts

Science.gov (United States)

Volk, Eugen; Müller, Marcus; Jacob, Ansger; Racz, Peter; Waldburger, Martin

Food supply chains today are characterized by fixed trade relations with long term contracts established between heterogeneous supply chain companies. Production and logistics capacities of these companies are often utilized in an economically inefficient manner only. In addition, increased consumer awareness in food safety issues renders supply chain management even more challenging, since integrated tracking and tracing along the whole food supply chain is needed. Facing these issues of supply chain management complexity and completely documented product quality, this paper proposes a full lifecycle solution for dynamic capacity markets based on concepts used in the field of Grid [1], like management of Virtual Organization (VO) combined with Service Level Agreement (SLA). The solution enables the cost-efficient utilization of real world capacities (e.g., production capacities or logistics facilities) by using a simple, browser-based portal. Users are able to enter into product-specific negotiations with buyers and suppliers of a food supply chain, and to obtain real-time access to product information including SLA evaluation reports. Thus, business opportunities in wider market access, process innovation, and trustworthy food products are offered for participating supply chain companies.

Computer model of the MFTF-B neutral beam Accel dc power supply

International Nuclear Information System (INIS)

Wilson, J.H.

1983-01-01

Using the SCEPTRE circuit modeling code, a computer model was developed for the MFTF Neutral Beam Power Supply System (NBPSS) Accel dc Power Supply (ADCPS). The ADCPS provides 90 kV, 88 A, to the Accel Modulator. Because of the complex behavior of the power supply, use of the computer model is necessary to adequately understand the power supply's behavior over a wide range of load conditions and faults. The model developed includes all the circuit components and parameters, and some of the stray values. The model has been well validated for transients with times on the order of milliseconds, and with one exception, for steady-state operation. When using a circuit modeling code for a system with a wide range of time constants, it can become impossible to obtain good solutions for all time ranges at once. The present model concentrates on the millisecond-range transients because the compensating capacitor bank tends to isolate the power supply from the load for faster transients. Attempts to include stray circuit elements with time constants in the microsecond and shorter range have had little success because of huge increases in computing time that result. The model has been successfully extended to include the accel modulator

Citizen preference assessment for power supply visions using choice experiments

International Nuclear Information System (INIS)

Nakatani, Jun; Tahara, Kiyotaka; Tanaka, Koji; Matsumoto, Shinya; Mizuno, Tateki

2015-01-01

In this paper, citizen preferences for power supply visions were assessed using choice experiments. In particular, preferences for the composition of power generation including renewable energy and nuclear power were analyzed. We also investigated how the need and consciousness for electricity saving affected the preferences for power supply visions. The results indicated that a respondent group who felt negative about resuming the operations at nuclear power plants had discriminative preferences for attributes of the power supply visions, and that the priority of carbon dioxide emissions as a criterion for evaluating the power supply visions became lower when the composition of power generation was presented. Consciousness for electricity saving, as well as preferences for nuclear power generation, differed depending on regions of residence, while their relationship was similar among respondent groups who lived in the jurisdictional areas of the electric power companies that had experienced risks of demand-supply gaps. (author)

Supply chain management of laboratory supportive services and its ...

African Journals Online (AJOL)

Supply chain management of laboratory supportive services and its potential implications on the quality of HIV diagnostic services in Tanzania. ... Results: A total of 39 health facilities (HF) were included in the study. This included 23 public ...

Country profiles: Lithuania [Analysis of energy supply options and security of energy supply in the Baltic States

International Nuclear Information System (INIS)

2007-01-01

Lithuania is a very dependent country in terms of energy resources. In 2000 only about 13.8% of the primary energy requirement was covered by domestic resources. The remaining primary fuel requirement is imported from neighbouring countries, mainly from Russia - all crude oil, natural gas and nuclear fuel are imported from this country. There is a concern about the political and economic consequences of this dependence. There is a good interconnection with neighbouring countries for both electrical grid and gas pipelines. The supply of crude oil is also available via pipeline from Russia and two existing oil terminals from other countries, including orimulsion from Venezuela. Coal can be supplied by railway from both Russia and Poland

Network evolution model for supply chain with manufactures as the core

Science.gov (United States)

Jiang, Dali; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model. PMID:29370201

Network evolution model for supply chain with manufactures as the core.

Science.gov (United States)

Fang, Haiyang; Jiang, Dali; Yang, Tinghong; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model.

Network evolution model for supply chain with manufactures as the core.

Directory of Open Access Journals (Sweden)

Haiyang Fang

Full Text Available Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model.

Analysis of Supply Chain Risk Management Strategies: Case Study of Supply Chain Disruptions

OpenAIRE

Marcelo Dias Carvalho; Leticia Ishikawa

2016-01-01

Supply Chain Risk Management refers to a set of strategies used by companies to avoid supply chain disruption caused by damage at production facilities, natural disasters, capacity issues, inventory problems, incorrect forecasts, and delays. Many companies use the techniques of the Toyota Production System, which in a way goes against a better management of supply chain risks. This paper studies key events in some multinationals to analyze the trade-off between the best supply chain risk mana...

Editorial: Supply Chain Management

Directory of Open Access Journals (Sweden)

Dimitrios Aidonis

2017-05-01

Full Text Available This special issue has followed up the 3rd Olympus International Conference on Supply Chains held on Athens Metropolitan Expo, November 7 & 8 2015, Greece. The Conference was organized by the Department of Logistics Technological Educational Institute of Central Macedonia, in collaboration with the: a Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH, b Greek Association of Supply Chain Management (EEL of Northern Greece and the c Supply Chain & Logistics Journal. During the 2-Days Conference more than 60 research papers were presented covering the following thematic areas: (i Transportation, (ii Best Practices in Logistics, (iii Information and Communication Technologies in Supply Chain Management, (iv Food Logistics, (v New Trends in Business Logistics, and (vi Green Supply Chain Management. Three keynote invited speakers addressed interesting issues for the Operational Research, the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

Nuclear fusion power supply device

International Nuclear Information System (INIS)

Nakagawa, Satoshi.

1975-01-01

Object: To use a hybrid power supply device, which comprises a thyristor power supply and a diode power supply, to decrease cost of a nuclear fusion power supply device. Structure: The device comprises a thyristor power supply connected through a closing unit and a diode power supply connected in parallel through a breaker, input of each power supply being applied with an output voltage of a flywheel AC generator. When a current transformer is excited, a disconnecting switch is turned on to close the diode power supply and a current of the current transformer is increased by an automatic voltage regulator to a set value within a predetermined period of time. Next, the current is cut off by a breaker, and when the breaker is in on position, the disconnecting switch is opened to turn on the closing unit. Thus, when a plasma electric current reaches a predetermined value, the breaker is turned on, and the current of the current transformer is controlled by the thyristor power supply. (Kamimura, M.)

Waste-wood resource supply assessment. Final report

International Nuclear Information System (INIS)

1991-08-01

The report documents and analyzes the availability and supply of wood waste in New York State to determine the type and amount currently generated to estimate its potential future use as a fuel. Detailed, current information is included on the availability, quantity and price of wood waste. Topics include wood waste markets; the harvesting and supply infrastructure; current and project prices; competing markets; environmental impacts of harvesting, processing and burning wood waste for fuel; and factors affecting long-term availability and supply. New York State's waste wood resource was evaluated to complete the Energy Authority's recent investigation of the potential role of wood in producing electric power. In 1989 approximately 11.8 million tons of wood waste were generated in New York State. More than 8 million tons or 68 percent, were disposed of by municipal solid waste and construction and demolition debris facilities. Just under 3.8 million tons or 32 percent, were reused and/or recycled. More than 25.7 million tons of wood waste could be available annually for fuel. Of the amount, more than 17.2 million tons per year, or 67 percent, could be produced by silvicultural activities that improve the health and productivity of forests

The design of supply chains

OpenAIRE

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature study Abstract Argues stability is a design objective for supply chain design alongside cost, lead time and responsiveness. Performs an extensive literature study on supply chain design, identifies methods, theories and objectives in the existing literature. Describes the concept external specificity and how it’s used to design supply chains. Using the concept upstream, archetypes of risk minimal and maximal desi...

Mediating Dynamic Supply Chain Formation by Collaborative Single Machine Earliness/Tardiness Agents in Supply Mesh

Directory of Open Access Journals (Sweden)

Hang Yang

2014-01-01

Full Text Available Nowadays, a trend of forming dynamic supply chains with different trading partners over different e-marketplaces has emerged. These supply chains, which are called “supply mesh,” generally refer to heterogeneous electronic marketplaces in which dynamic supply chains, as per project (often make-to-order, are formed across different parties. Conceptually, in a supply mesh a dynamic supply chain is formed vertically, mediating several companies for a project. Companies that are on the same level horizontally are either competitors or cohorts. A complex scenario such as this makes it challenging to find the right group of members for a dynamic supply chain. Earlier on, a multiagent model called the collaborative single machine earliness/tardiness (CSET model was proposed for the optimal formation of make-to-order supply chains. This paper contributes the particular agent designs, for enabling the mediation of CSET in a supply mesh, and the possibilities are discussed. It is demonstrated via a computer simulation, based on samples from the U.S. textile industry, that by using intelligent agents under the CSET model it is possible to automatically find an ideal group of trading partners from a supply mesh.

Reliability of dc power supplies in nuclear power plant application

International Nuclear Information System (INIS)

Eisenhut, D.G.

1978-01-01

In June 1977 the reliability of dc power supplies at nuclear power facilities was questioned. It was postulated that a sudden gross failure of the redundant dc power supplies might occur during normal plant operation, and that this could lead to insufficient shutdown cooling of the reactor core. It was further suggested that this potential for insufficient cooling is great enough to warrant consideration of prompt remedies. The work described herein was part of the NRC staff's efforts aimed towards putting the performance of dc power supplies in proper perspective and was mainly directed towards the particular concern raised at that time. While the staff did not attempt to perform a systematic study of overall dc power supply reliability including all possible failure modes for such supplies, the work summarized herein describes how a probabilistic approach was used to supplement our more usual deterministic approach to reactor safety. Our evaluation concluded that the likelihood of dc power supply failures leading to insufficient shutdown cooling of the reactor core is sufficiently small as to not require any immediate action

A global water supply reservoir yield model with uncertainty analysis

International Nuclear Information System (INIS)

Kuria, Faith W; Vogel, Richard M

2014-01-01

Understanding the reliability and uncertainty associated with water supply yields derived from surface water reservoirs is central for planning purposes. Using a global dataset of monthly river discharge, we introduce a generalized model for estimating the mean and variance of water supply yield, Y, expected from a reservoir for a prespecified reliability, R, and storage capacity, S assuming a flow record of length n. The generalized storage–reliability–yield (SRY) relationships reported here have numerous water resource applications ranging from preliminary water supply investigations, to economic and climate change impact assessments. An example indicates how our generalized SRY relationship can be combined with a hydroclimatic model to determine the impact of climate change on surface reservoir water supply yields. We also document that the variability of estimates of water supply yield are invariant to characteristics of the reservoir system, including its storage capacity and reliability. Standardized metrics of the variability of water supply yields are shown to depend only on the sample size of the inflows and the statistical characteristics of the inflow series. (paper)

1000-kVA arc power supply

International Nuclear Information System (INIS)

Wright, R.E.; Barber, G.C.; Ponte, N.S.

1979-01-01

Because of ever-increasing power demands for the development of the Oak Ridge duoPIGatron ion source, a continuous-duty arc power supply was constructed for the Medium Energy Test Facility (METF) to furnish power for the plasma generator of experimental ion sources. The power supply utilizes 12-pulse rectification with half-wave switching in a delta and wye full-wave bridge that may be connected in series or parallel. It will deliver 340 V dc, 2500 A to an ion source when series connected and 170 V dc, 5000 A when paralleled connected. Silicon-controlled rectifiers (SCR) in each rectifier bridge can be switched for pulses as short as 10 ms through continuous duty. The filter section that reduces the ripple in the output consists of an inductor-to-capacitor (L-C) filter to smooth the 720-Hz pulses. The power transformer serves as an isolation transformer allowing the secondary to be elevated to the accelerating potential of the ion source. The dc output level is controlled with a 1000-kVA auto transformer connected to the primary of the power transformer. All elevated voltages and currents are monitored at ground potential with an optical telemetry system. This paper describes the power supply in detail, including block diagrams, component specifications, and waveforms when supplying power to an ion source

ENDOGENEITY OF INDONESIAN MONEY SUPPLY

Directory of Open Access Journals (Sweden)

Meutia Safrina Rachma

2011-09-01

Full Text Available There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5-2010(6, the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not have control power on money supply. The bank is only able to maintain the stability and control the movement of broad money supply. Keywords: Endogenous variable, money supply, vector autoregressionJEL classification numbers: E51, E52, E58

Synergy between the Multiple Supply Chain and Green Supply Chain Management (GSCM) approaches: an initial analysis aimed at fostering supply chain sustainability

OpenAIRE

Ana Lima de Carvalho; Livia Rodrigues Ignácio; Kleber Francisco Esposto; Aldo Roberto Ometto

2016-01-01

The concept of Green Supply Chain Management (GSCM) was created in the 90s to reduce the environmental impacts of productive systems. This approach seeks to improve the environmental performance of all the participants in a supply chain, from the extraction of raw materials to the use and final disposal of the product, through relationships of collaboration or conformity between the parties. The multiple supply chains approach established by Gattorna (2009) brought to light different supply c...

The design of supply chains

DEFF Research Database (Denmark)

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature studyAbstract Argues stability is a design objective for supply chain design alongside cost, leadtime and responsiveness. Performs an extensive literature study on supply chain design,identifies methods, theories and objectives...... in the existing literature. Describes the conceptexternal specificity and how it's used to design supply chains. Using the concept upstream,archetypes of risk minimal and maximal design are identified. Downstream the conceptdescribes two viable scenarios, one minimizing the impact, the other minimizing...... theprobability of (intended) departure of a supply chain partner. Finally, principles for supplychain design are described and managerial outlined....

smaRTI: Deploying the internet of things in retail supply chains

OpenAIRE

Anderseck, Björn; Hille, Alexander

2013-01-01

This paper describes a cloud based tracking and tracing system based on the principals of the internet of things. The ’things’ are returnable assets in retail supply chains. They are used to gain a very high transparency over the hole supply chain, including redistribution processes, by making them smart with autoID-technologies. A cloud based IT solution connects the supply chain partners and makes information visible where it is needed. The system is strictly developed with a user friendly ...

International Conference SES 2009: Secure Energy Supply

International Nuclear Information System (INIS)

2009-01-01

The Conference included the following sessions: Opening addresses; (I) Energy policy; (II) Environment, Renewable sources and NPPs; (III) Secure energy supply - New nuclear units. Verbal 21 presentations have been inputted into INIS, all in the form of the full authors' presentations.

Moving Segmentation Up the Supply-Chain: Supply Chain Segmentation and Artificial Neural Networks

OpenAIRE

Erevelles, Sunil; Fukawa, Nobuyuki

2008-01-01

This paper explained the concept of supply-side segmentation and transvectional alignment, and applies these concepts in the artificial neural network (ANN). To the best of our knowledge, no research has applied ANN in explaining the heterogeneity of both the supply-side and demand-side of a market in forming relational entity that consists of firms at all levels of the supply chain and the demand chain. The ANN offers a way of operationalizing the concept of supply-side segmentation. In toda...

An Improved Supplier Driven Packaging Design and Development Method for Supply Chain Efficiency

DEFF Research Database (Denmark)

Sohrabpour, Vahid; Oghazi, Pejvak; Olsson, Annika

2016-01-01

and satisfaction in interaction with the product and packaging system. It also proposes a supply chain focused packaging design and development method to better satisfy supply chain needs placed on packaging. An extensive literature review was conducted, and a Tetra Pak derived case study was developed......Packaging and the role it plays in supply chain efficiency are overlooked in most design and development research. An opportunity exists to meet the needs of supply chains to increase efficiency. This research presents three propositions on how to reduce the gap between supply chain needs....... The propositions were formulated and became the basis for improving Tetra Pak's existing packaging design and development method by better integrating supply chain needs. This was accomplished by using an expanded operational life cycle perspective that includes the entire supply chain. The resulting supply chain...

The composite supply chain efficiency model: A case study of the Sishen-Saldanha supply chain

Directory of Open Access Journals (Sweden)

Leila L. Goedhals-Gerber

2016-01-01

Full Text Available As South Africa strives to be a major force in global markets, it is essential that South African supply chains achieve and maintain a competitive advantage. One approach to achieving this is to ensure that South African supply chains maximise their levels of efficiency. Consequently, the efficiency levels of South Africa’s supply chains must be evaluated. The objective of this article is to propose a model that can assist South African industries in becoming internationally competitive by providing them with a tool for evaluating their levels of efficiency both as individual firms and as a component in an overall supply chain. The Composite Supply Chain Efficiency Model (CSCEM was developed to measure supply chain efficiency across supply chains using variables identified as problem areas experienced by South African supply chains. The CSCEM is tested in this article using the Sishen-Saldanda iron ore supply chain as a case study. The results indicate that all three links or nodes along the Sishen-Saldanha iron ore supply chain performed well. The average efficiency of the rail leg was 97.34%, while the average efficiency of the mine and the port were 97% and 95.44%, respectively. The results also show that the CSCEM can be used by South African firms to measure their levels of supply chain efficiency. This article concludes with the benefits of the CSCEM.

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

Science.gov (United States)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

Directory of Open Access Journals (Sweden)

A.L.V. Raubenheimer

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

Design of Demand Driven Return Supply Chain for High-Tech Products

NARCIS (Netherlands)

Ashayeri, J.; Tuzkaya, G.

2010-01-01

Many high-tech supply chain operate in a context of high process and market uncertainties due to shorter product life cycles. When introducing a new product, a company must manage the cost of supply, including the cost of returns over its short life cycle. The returns distribution looks like a

Development of the power supplies of the prototype ion source for the EAST

International Nuclear Information System (INIS)

Liu Zhimin; Hu Chundong; Liu Sheng; Jiang Caichao; Song Shihua; Xie Yahong; Sheng Peng

2011-01-01

For the neutral beam injector (NBI) of the Experimental Advanced Superconducting Tokamak (EAST), a test stand of a high-current ion source has been in construction. The NBI power supply system includes the plasma generator power supply, plasma electrode power supply, high voltage power divider, negative high voltage power supply, and the transmission lines and the snubber. A multi-megawatt prototype ion source was developed. The arc discharge of the prototype ion source was obtained in the test. The test results for the ion source power supplies and the arc discharge of the ion source are presented. (authors)

The future of oil supply.

Science.gov (United States)

Miller, Richard G; Sorrell, Steven R

2014-01-13

Abundant supplies of oil form the foundation of modern industrial economies, but the capacity to maintain and grow global supply is attracting increasing concern. Some commentators forecast a peak in the near future and a subsequent terminal decline in global oil production, while others highlight the recent growth in 'tight oil' production and the scope for developing unconventional resources. There are disagreements over the size, cost and recoverability of different resources, the technical and economic potential of different technologies, the contribution of different factors to market trends and the economic implications of reduced supply. Few debates are more important, more contentious, more wide-ranging or more confused. This paper summarizes the main concepts, terms, issues and evidence that are necessary to understand the 'peak oil' debate. These include: the origin, nature and classification of oil resources; the trends in oil production and discoveries; the typical production profiles of oil fields, basins and producing regions; the mechanisms underlying those profiles; the extent of depletion of conventional oil; the risk of an approaching peak in global production; and the potential of various mitigation options. The aim is to introduce the subject to non-specialist readers and provide a basis for the subsequent papers in this Theme Issue.

Alignment of global supply networks based on strategic groups of supply chains

OpenAIRE

Nikos G. Moraitakis; Jiazhen Huo; Hans-Christian Pfohl

2017-01-01

Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic su...

THE ROLE OF SUPPLY CHAIN COLLABORATION ON SUSTAINABLE SUPPLY CHAIN MANAGEMENT PERFORMANCE

OpenAIRE

Ince, Huseyin; Ince, Andac Sahinbey

2015-01-01

Sustainable supply chain management and collaboration have taken big attention from academicians and practitioners. The extensive literature review is conducted to analyse the relationship between Sustainable Supply Chain Management and collaboration and its effects on performance of SSCM dimensions. Then, a framework is proposed to explain the relationship between sustainable supply chain management and collaboration. For further studies the proposed framework should be tested empirically.

Risk Management in Biopharmaceutical Supply Chains

OpenAIRE

Ma, Yao

2011-01-01

Biopharmaceutical supply chains present considerable complexity issue for the formulation of optimal plans due to significant uncertainty in the supply chain. The primary goal of biopharmaceutical supply chain planning is to provide reliable supply to patients while coping with various supply chain risks. In chapter 1 first I discuss the key elements and basic characteristics of the biopharmaceutical supply chain . Then I present the major challenges in biopharmaceutical supply chain planning...

Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

Science.gov (United States)

Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

2013-01-01

Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

Science.gov (United States)

Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

2013-01-01

Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API.

Supply chain planning classification

Science.gov (United States)

Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

2001-10-01

Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

Energy security of supply under EU climate policies

International Nuclear Information System (INIS)

Groenenberg, H.; Wetzelaer, B.J.H.W.

2006-12-01

The implications of various climate policies for the security of supply in the EU-25 were investigated. The security of supply was quantified using the Supply/Demand (S/D) Index. This index aggregates quantitative information on a country's energy system into one single figure. It takes a value between 0 and 100, with higher values indicating a more secure energy system. The S/D Index was calculated for the year 2020 based on the information in a series of policy scenarios, including a baseline (S/D Index 50.7), an energy efficiency scenario (53.8), two renewable energy scenarios (52.6 and 53.3) and two scenarios with combined policies (55.9 and 55.6).The S/D Index proved a useful indicator for assessing the implications of climate policies for the security of supply. As climate policies become more stringent, CO2 index fall, and the S/D index increases. The magnitude of the changes in the two indices is not always similar however. Major falls in CO2 indices in the order of 20% for two scenarios with combined energy efficiency and renewable energy polices lead to less noteworthy improvements in the associated S/D indices. Nevertheless, this combination of policies leads to the greatest improvements in the security of supply

The global uranium market: supply and demand 1992-2010

International Nuclear Information System (INIS)

1994-06-01

This document looks at the supply of and demand for uranium on markets worldwide and covers the years 1992 to 2010. Uranium and nuclear fuel markets have become truly global with the inclusion of fuel cycle companies from Eastern Europe and the Commonwealth of Independent States (CIS) leading at the same time to additional supplies becoming available and new political constraints on uranium trading. This report includes new data from China, Eastern Europe and the CIS republics. As recycling plays on ever more important role, the global supply and demand balance for uranium and fuel services is altered. Prospects for nuclear power growth and for the uranium market in the next century remain uncertain. (UK)

45 CFR 602.33 - Supplies.

Science.gov (United States)

2010-10-01

... unused supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of... 45 Public Welfare 3 2010-10-01 2010-10-01 false Supplies. 602.33 Section 602.33 Public Welfare....33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon...

49 CFR 18.33 - Supplies.

Science.gov (United States)

2010-10-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 49 Transportation 1 2010-10-01 2010-10-01 false Supplies. 18.33 Section 18.33 Transportation... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

14 CFR 1273.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Supplies. 1273.33 Section 1273.33..., Property, and Subawards § 1273.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

Maintenance management of emergency power supply equipment (uninterruptible power supply) in Tokai reprocessing plant

International Nuclear Information System (INIS)

Nishida, Kyosuke; Hiyama, Hisao; Shibata, Satomi; Iwasaki, Shogo; Inami, Shinichi

2009-01-01

Uninterruptible power supply systems are installed in the Tokai reprocessing plant in preparation for the emergency case that the commercial power supply is stopped by an accidental or intentional interruption in the supply of electricity. The uninterruptible power supply system particularly provides a temporary power source to the important devices for the radiation control of nuclear critical monitoring in the plant. Thus, the system is potentially important and essential for nuclear plants. The paper reports the current activities such as regular inspections, replacement of parts and system update, to maintain the function of uninterruptible power supply systems. (author)

On Production and Green Transportation Coordination in a Sustainable Global Supply Chain

Directory of Open Access Journals (Sweden)

Feng Guo

2017-11-01

Full Text Available This paper addresses a coordination problem of production and green transportation and the effects of production and transportation coordination on supply chain sustainability in a global supply chain environment with the consideration of important realistic characteristics, including parallel machines, different order processing complexities, fixed delivery departure times, green transportation and multiple transportation modes. We formulate the measurements for carbon emissions of different transportation modes, including air, sea and land transportation. A hybrid genetic algorithm-based optimization approach is developed to handle this problem, in which a hybrid genetic algorithm and heuristic procedures are combined. The effectiveness of the proposed approach is validated by means of various problem instances. We observe that the coordination of production and green transportation has a large effect on the overall supply chain sustainability, which can reduce the total supply chain cost by 9.60% to 21.90%.

Supply and distribution for γ-ray sources

International Nuclear Information System (INIS)

Yamamoto, Takeo

1997-01-01

Japan Atomic energy Research Institute (JAERI) is the only facility to supply and distribute radioisotopes (RI) in Japan. The γ-ray sources for medical use are 192 Ir and 169 Yb for non-destructive examination and 192 Ir, 198 Au and 153 Gd for clinical use. All of these demands in Japan are supplied with domestic products at present. Meanwhile, γ-ray sources imported are 60 Co sources for medical and industrial uses including sterilization of medical instruments, 137 Cs for irradiation to blood and 241 Am for industrial measurements. The major overseas suppliers are Nordion International Inc. and Amersham International plc. RI products on the market are divided into two groups; one is the primary products which are supplied in liquid or solid after chemical or physical treatments of radioactive materials obtained from reactor and the other is the secondary product which is a final product after various processing. Generally these secondary products are used in practice. In Japan, both of the domestic and imported products are supplied to the users via JRIA (Japan Radioisotope Association). The association participates in the sales and the distributions of the secondary products and also in the processings of the primary ones to their sealed sources. Furthermore, stable supplying systems for these products are almost established according to the half life of each nuclide only if there is no accident in the reactor. (M.N.)

NGL supply from Alberta straddle plants

International Nuclear Information System (INIS)

McAdam, B.

1999-01-01

An overview of the current and future North American supply and demand and trends for natural gas liquids (NGLs) is presented. The current Alberta straddle plant configuration, the NGL pipeline system and product flow, and the profitability of straddle plants are described. The driving forces to increase Alberta's straddle plant capacity are also reviewed. These include: (1) increased gas production, (2) increased demand for ethane, (3) control of produced NGLs, and (4) the desire to maintain a competitive position. Highlights of the Centurion Project designed to meet the needs of Dow Chemicals and the producers by providing long-term ethane supply and physical access to a more liquid NGL market, the project's current status and 'next steps' were also summarized. tabs., figs

Supply chain modeling of forest fuel

Energy Technology Data Exchange (ETDEWEB)

Gunnarsson, Helene; Lundgren, Jan T.; Roennqvist, Mikael

2001-04-01

We study the problem of deciding when and where forest residues are to be converted into forest fuel, and how the residues are to be transported and stored in order to satisfy demand at heating plants. Decisions also include whether or not additional harvest areas and saw-mills are to be contracted. In addition, we consider the flow of products from saw-mills and import harbors, and address the question about which terminals to use. The planning horizon is one year and monthly time periods are considered. The supply chain problem is formulated as a large mixed integer linear programming model. In order to obtain solutions within reasonable time we have developed a heuristic solution approach. Computational results from a large Swedish supplying entrepreneur are reported.

Supply chain modeling of forest fuel

International Nuclear Information System (INIS)

Gunnarsson, Helene; Lundgren, Jan T.; Roennqvist, Mikael

2001-04-01

We study the problem of deciding when and where forest residues are to be converted into forest fuel, and how the residues are to be transported and stored in order to satisfy demand at heating plants. Decisions also include whether or not additional harvest areas and saw-mills are to be contracted. In addition, we consider the flow of products from saw-mills and import harbors, and address the question about which terminals to use. The planning horizon is one year and monthly time periods are considered. The supply chain problem is formulated as a large mixed integer linear programming model. In order to obtain solutions within reasonable time we have developed a heuristic solution approach. Computational results from a large Swedish supplying entrepreneur are reported

Essentials of supply chain management

CERN Document Server

Hugos, Michael H

2011-01-01

The latest thinking, strategies, developments, and technologies to stay current in supply chain management Presenting the core concepts and techniques of supply chain management in a clear, concise and easily readable style, the Third Edition of Essentials of Supply Chain Management outlines the most crucial tenets and concepts of supply chain management.

40 CFR 31.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Supplies. 31.33 Section 31.33... Requirements Changes, Property, and Subawards § 31.33 Supplies. (a) Title. Title to supplies acquired under a...

13 CFR 143.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Supplies. 143.33 Section 143.33..., and Subawards § 143.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

29 CFR 1470.33 - Supplies.

Science.gov (United States)

2010-07-01

.... If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair market... 29 Labor 4 2010-07-01 2010-07-01 false Supplies. 1470.33 Section 1470.33 Labor Regulations... Changes, Property, and Subawards § 1470.33 Supplies. (a) Title. Title to supplies acquired under a grant...

45 CFR 1183.33 - Supplies.

Science.gov (United States)

2010-10-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 45 Public Welfare 3 2010-10-01 2010-10-01 false Supplies. 1183.33 Section 1183.33 Public Welfare... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

38 CFR 43.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Supplies. 43.33 Section... Requirements Changes, Property, and Subawards § 43.33 Supplies. (a) Title. Title to supplies acquired under a...

45 CFR 2541.330 - Supplies.

Science.gov (United States)

2010-10-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 4 2010-10-01 2010-10-01 false Supplies. 2541.330 Section 2541.330 Public Welfare..., Property and Subawards § 2541.330 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

32 CFR 32.35 - Supplies.

Science.gov (United States)

2010-07-01

... in total aggregate value upon termination or completion of the project or program and the supplies... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 32.35 Section 32.35 National Defense... ORGANIZATIONS Post-Award Requirements Property Standards § 32.35 Supplies. (a) Title to supplies shall vest in...

10 CFR 600.233 - Supplies.

Science.gov (United States)

2010-01-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.233 Section 600.233 Energy DEPARTMENT OF... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

32 CFR 33.33 - Supplies.

Science.gov (United States)

2010-07-01

...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 33.33 Section 33.33 National Defense... Requirements Changes, Property, and Subawards § 33.33 Supplies. (a) Title. Title to supplies acquired under a...

20 CFR 437.33 - Supplies.

Science.gov (United States)

2010-04-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Supplies. 437.33 Section 437.33 Employees... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

22 CFR 135.33 - Supplies.

Science.gov (United States)

2010-04-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Supplies. 135.33 Section 135.33 Foreign... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

45 CFR 92.33 - Supplies.

Science.gov (United States)

2010-10-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 1 2010-10-01 2010-10-01 false Supplies. 92.33 Section 92.33 Public Welfare..., Property, and Subawards § 92.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

15 CFR 24.33 - Supplies.

Science.gov (United States)

2010-01-01

... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Supplies. 24.33 Section 24.33 Commerce..., and Subawards § 24.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

Efficiency of supply chain management. Strategic and operational approach

Directory of Open Access Journals (Sweden)

Grzegorz Lichocik

2013-06-01

Full Text Available Background: One of the most important issues subject to theoretical considerations and empirical studies is the measurement of efficiency of activities in logistics and supply chain management. Simultaneously, efficiency is one of the terms interpreted in an ambiguous and multi-aspect manner, depending on the subject of a study. The multitude of analytical dimensions of this term results in the fact that, apart from economic efficiency being the basic study area, other dimensions perceived as an added value by different groups of supply chain participants become more and more important. Methods: The objective of this paper is to attempt to explain the problem of supply chain management efficiency in the context of general theoretical considerations relating to supply chain management. The authors have also highlighted determinants and practical implications of supply chain management efficiency in strategic and operational contexts. The study employs critical analyses of logistics literature and the free-form interview with top management representatives of a company operating in the TSL sector. Results: We must find a comprehensive approach to supply chain efficiency including all analytical dimensions connected with real goods and services flow. An effective supply chain must be cost-effective (ensuring economic efficiency of a chain, functional (reducing processes, lean, minimising the number of links in the chain to the necessary ones, adapting supply chain participants' internal processes to a common objective based on its efficiency and ensuring high quality of services (customer-oriented logistics systems. Conclusions: Efficiency of supply chains is not only a task for which a logistics department is responsible as it is a strategic decision taken by the management as regards the method of future company's operation. Correctly planned and fulfilled logistics tasks may result in improving performance of a company as well as the whole

Oil supply in Central and South America

International Nuclear Information System (INIS)

Aguilera, Roberto F.

2009-01-01

This paper estimates a cumulative supply curve for conventional oil in the Central and South American (CSA) region. The curve includes volumes from provinces not previously assessed by other organizations, as well as reserve growth. Volumes for the previously unassessed provinces are estimated using a variable shape distribution (VSD) model. Then the volumes are allocated to CSA countries based on each country's share of proved reserves. Figures provided by the cumulative supply curve are stock variables for all time, unlike the traditional supply curve where they are flow variables that can continue from one period to the next. In this study, the fixed stock approach is used since it provides practical information with respect to the concerns that some have expressed about oil scarcity in the near future. Results indicate that Central and South American oil is more abundant than often assumed, and can be produced at costs below current market oil prices, and substantially below mid-2008 prices.

Decentralised energy supply in 2020 - Commercial aspects

International Nuclear Information System (INIS)

Kleimaier, M.

2007-01-01

This comprehensive article summarises the commercial aspects of a study made by the German Association of Electrical, Electronic and Information Technologies VDE on the topic of decentralised energy supply in the year 2020. In a previous article, the technical aspects were examined. This article looks at the findings in connection with commercial aspects of the production of power in decentralised facilities including those using renewable sources of energy. The potential of these forms of electricity generation for the year 2020 is looked at both from the political and economical points of view. The general conditions prevailing for the implementation of decentralised power production in Germany such as the Renewable Energy Law and legislation on combined heat and power generation are discussed. The influence of electricity tariffs and competition in the market is examined, as are various scenarios and concepts for the supply of both power and heating energy. Ways of providing a sustainable energy supply without having to subsidise particular concepts are discussed

Optimum design of a nuclear heat supply

International Nuclear Information System (INIS)

Borel, J.P.

1984-01-01

This paper presents an economic analysis for the optimum design of a nuclear heat supply to a given district-heating network. First, a general description of the system is given, which includes a nuclear power plant, a heating power plant and a district-heating network. The heating power plant is fed with steam from the nuclear power plant. It is assumed that the heating network is already in operation and that the nuclear power plant was previously designed to supply electricity. Second, a technical definition of the heat production and transportation installations is given. The optimal power of these installations is examined. The main result is a relationship between the network capacity and the level of the nuclear heat supply as a substitute for oil under the best economic conditions. The analysis also presents information for choosing the best operating mode. Finally, the heating power plant is studied in more detail from the energy, technical and economic aspects. (author)

An integrated mine development and supply system

Energy Technology Data Exchange (ETDEWEB)

Muguira, T. [Brambles Coal Services, Newcastle, NSW (Australia)

1998-12-31

In the face of intense global competition and other business pressures on coal miners, ongoing quality initiatives and continuous process improvements are needed to enhance business performance. By viewing a minesite interms of key processes, rather than departments, and employing innovative technologies and better applying organisational resources, there exists enormous potential to achieve reductions in process cost and time. The paper identifies and selects one critical coal mining process, namely the supply system, to think about how productivity improvements might occur and what changes might be employed to enhance overall system performance. While the supply system is one of few processes existing at a minesite, the paper addresses only the supply process, but includes interaction across traditional interdepartmental boundaries. The paper has been prepared for a wide audience and is based on experience and observation at several underground mines however some of the concepts are a result of dreaming in the face of global competition. 3 refs., 1 tab.

Transportation as an Untapped Potential for Competitive Supply Chain Management Advantage

DEFF Research Database (Denmark)

Borgström, Benedikte

2017-01-01

This article argues that top managers and supply chain managers need to become involved in transport and logistics policy making and include it in the strategic development of supply chain management processes. Under the assumption that these operations are outsourced, the crucial “top-down” task...... is to realize the trade-offs in designing and operating logistics systems and make sure that the ongoing task of making transport and logistics choices is aligned to the strategic direction set out for supply chain management business process development....

Uruguay Energy Supply Options Study: a Detailed Multi-Sector Integrated Energy Supply and Demand Analysis

International Nuclear Information System (INIS)

Conzelmann, G.; Veselka, T.

1997-01-01

Uruguay is in the middle of making critical decisions affecting the design of its future energy supply system.Momentum for change is expected to come from several directions including recent and foreseeable upgrades and modifications to energy conversion facilities, the importation of natural gas from Argentina, the possibility for a stronger interconnection of regional electricity systems, the country s membership in MERCOSUR, and the potential for energy sector reforms by the Government of Uruguay.The objective of this study is to analyze the effects of several fuel diversification strategies on Uruguay s energy supply system.The analysis pays special attention to fuel substitution trends due to potential imports of natural gas via a gas pipeline from Argentina and increasing electricity ties with neighboring countries.The Government of Uruguay contracted Argonne National Laboratory (ANL) to study several energy development scenario ns with the support of several Uruguayan Institutions.Specifically, ANL was asked to conduct a detailed energy supply and demand analysis, develop energy demand projections based on an analysis of past energy demand patterns with support from local institutions, evaluate the effects of potential natural gas imports and electricity exchanges, and determine the market penetration of natural gas under various scenarios

Detox fashion supply chain

CERN Document Server

2017-01-01

This first volume on detox fashion discusses various interesting topics including a Toxic-Free Supply Chain for Textiles and Clothing; Environmental Issues in Textiles; Global Regulations, Restrictions & Research; Making the Change: Consumer Adoption of Sustainable Fashion; and Strategies for Detoxing Your Wardrobe. It provides an overview of the chemical-related issues confronting the fashion sector, summarizes global regulations, and discusses how to make the change by changing consumers’ attitude towards adopting sustainable fashion, as well as the best strategies for detoxing our wardrobes.

A Novel Water Supply Network Sectorization Methodology Based on a Complete Economic Analysis, Including Uncertainties

Directory of Open Access Journals (Sweden)

Enrique Campbell

2016-04-01

Full Text Available The core idea behind sectorization of Water Supply Networks (WSNs is to establish areas partially isolated from the rest of the network to improve operational control. Besides the benefits associated with sectorization, some drawbacks must be taken into consideration by water operators: the economic investment associated with both boundary valves and flowmeters and the reduction of both pressure and system resilience. The target of sectorization is to properly balance these negative and positive aspects. Sectorization methodologies addressing the economic aspects mainly consider costs of valves and flowmeters and of energy, and the benefits in terms of water saving linked to pressure reduction. However, sectorization entails other benefits, such as the reduction of domestic consumption, the reduction of burst frequency and the enhanced capacity to detect and intervene over future leakage events. We implement a development proposed by the International Water Association (IWA to estimate the aforementioned benefits. Such a development is integrated in a novel sectorization methodology based on a social network community detection algorithm, combined with a genetic algorithm optimization method and Monte Carlo simulation. The methodology is implemented over a fraction of the WSN of Managua city, capital of Nicaragua, generating a net benefit of 25,572 $/year.

Antecedents for the Adoption and Execution of Supply Chain Management

DEFF Research Database (Denmark)

Kotzab, Herbert; Teller, Christoph; Grant, David B.

2011-01-01

through a survey of 174 senior supply chain managers representing the biggest organisations within a central European country. Findings – Using structural equation modelling the hypothesised hierarchical order of three proposed antecedents is verified: “internal SCM conditions”, that affect “joint......Purpose – The purpose of this paper is to develop a conceptual model that includes drivers of supply chain management (SCM) adoption and execution identified in the literature, provide a set of measurement scales that operationalise constructs within this model, empirically verify a hierarchical......-specific supply chain setting. Practical implications – The findings provide a hierarchical focus for financial, personnel and management initiatives to increase integration within a supply chain and improve competitiveness. Originality/value – The major contribution of this paper is that it provides empirical...

Trim coil power supplies

International Nuclear Information System (INIS)

Haisler, R.; Peeler, H.; Zajicek, W.

1985-01-01

The 18 trim coil power supplies have been constructed and are now in place in the K500 pit and pit mezzanine. Final wiring of the primary power and control power is proceeding along with installation of cooling water supplies. The supplies are expected to be ready for final testing into resistive loads at the beginning of June, 1985

Labor supply functions of working male and female pharmacists: In search of the backward bend.

Science.gov (United States)

Carvajal, Manuel J; Deziel, Lisa; Armayor, Graciela M

2012-01-01

Previous research has shown that U.S. pharmacists experience negative elasticities along a backward-bending labor supply function. The presence of a backward bend in the labor supply curve may cause a decrease in the amount of work at a time of labor shortage. Therefore, the determinants of pharmacists' labor supply functions should be explored to assess the impact of this backward bend. To determine whether female and male pharmacist work inputs are influenced by the same factors and estimate where the backward bend occurs, if at all, in their labor supply functions. Data were collected using a survey questionnaire mailed to registered pharmacists in South Florida. Labor supply functions were formulated and tested separately for 558 men and 498 women. The wage rate, other household income, human capital stock, job-related preferences, and opinion variables were hypothesized to explain labor supply differentials. Human capital stock variables included professional experience, holding a specialty board certification, and number of children; job-related preference variables included urban-rural location of work site and main role as a practitioner; and opinion variables included stress, autonomy, fairness in the workplace, flexibility, and job security. Men and women responded differently to identical stimuli, and their supply functions were influenced in different ways by the explanatory variables. Both genders exhibited positive labor supply elasticities greater than those reported in other studies. Both genders' backward bend in their labor supply functions occurred several standard deviations to the right of the mean. The backward bend in the labor supply functions of male and female pharmacists is not likely to affect in the near future the labor market's ability to regulate shortages of practitioners via increases in the wage rate. A more thorough understanding of pharmacists' labor supply functions must address gender issues and differences in response to

21 CFR 1403.33 - Supplies.

Science.gov (United States)

2010-04-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Supplies. 1403.33 Section 1403.33 Food and Drugs... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

34 CFR 80.33 - Supplies.

Science.gov (United States)

2010-07-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 34 Education 1 2010-07-01 2010-07-01 false Supplies. 80.33 Section 80.33 Education Office of the... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

Simulation as a key to success in power supply design and development

Energy Technology Data Exchange (ETDEWEB)

Suur-Askola, S.; Laasonen, M.; Maeki, J. [Efore Muuntolaite Oy, Vantaa (Finland)

1997-12-31

This paper describes the design and development process of a power supply by using simulation methods. The simulation principles and results of a 40W power supply are provided including EMI, voltage and current rating verification as well as power loss approximation. (orig.) 8 refs.

A Supply and Demand Management Perspective on the Accelerated Global Introductions of Inactivated Poliovirus Vaccine in a Constrained Supply Market

Science.gov (United States)

Ottosen, Ann; Rubin, Jennifer; Blanc, Diana Chang; Zipursky, Simona; Wootton, Emily

2017-01-01

Abstract A total of 105 countries have introduced IPV as of September 2016 of which 85 have procured the vaccine through UNICEF. The Global Eradication and Endgame Strategic Plan 2013-2018 called for the rapid introduction of at least one dose of IPV into routine immunization schedules in 126 all OPV-using countries by the end of 2015. At the time of initiating the procurement process, demand was estimated based on global modeling rather than individual country indications. In its capacity as procurement agency for the Global Polio Eradication Initiative and Gavi, the Vaccine Alliance, UNICEF set out to secure access to IPV supply for around 100 countries. Based on offers received, sufficient supply was awarded to two manufacturers to meet projected routine requirements. However, due to technical issues scaling up vaccine production and an unforecasted demand for IPV use in campaigns to interrupt wild polio virus and to control type 2 vaccine derived polio virus outbreaks, IPV supplies are severely constrained. Activities to stretch supplies and to suppress demand have been ongoing since 2014, including delaying IPV introduction in countries where risks of type 2 reintroduction are lower, implementing the multi-dose vial policy, and encouraging the use of fractional dose delivered intradermally. Despite these efforts, there is still insufficient IPV supply to meet demand. The impact of the supply situation on IPV introduction timelines in countries are the focus of this article, and based on lessons learned with the IPV introductions, it is recommended for future health programs with accelerated scale up of programs, to take a cautious approach on supply commitments, putting in place clear allocation criteria in case of shortages or delays and establishing a communication strategy vis a vis beneficiaries. PMID:28838159

A Supply and Demand Management Perspective on the Accelerated Global Introductions of Inactivated Poliovirus Vaccine in a Constrained Supply Market.

Science.gov (United States)

Lewis, Ian; Ottosen, Ann; Rubin, Jennifer; Blanc, Diana Chang; Zipursky, Simona; Wootton, Emily

2017-07-01

A total of 105 countries have introduced IPV as of September 2016 of which 85 have procured the vaccine through UNICEF. The Global Eradication and Endgame Strategic Plan 2013-2018 called for the rapid introduction of at least one dose of IPV into routine immunization schedules in 126 all OPV-using countries by the end of 2015. At the time of initiating the procurement process, demand was estimated based on global modeling rather than individual country indications. In its capacity as procurement agency for the Global Polio Eradication Initiative and Gavi, the Vaccine Alliance, UNICEF set out to secure access to IPV supply for around 100 countries. Based on offers received, sufficient supply was awarded to two manufacturers to meet projected routine requirements. However, due to technical issues scaling up vaccine production and an unforecasted demand for IPV use in campaigns to interrupt wild polio virus and to control type 2 vaccine derived polio virus outbreaks, IPV supplies are severely constrained. Activities to stretch supplies and to suppress demand have been ongoing since 2014, including delaying IPV introduction in countries where risks of type 2 reintroduction are lower, implementing the multi-dose vial policy, and encouraging the use of fractional dose delivered intradermally. Despite these efforts, there is still insufficient IPV supply to meet demand. The impact of the supply situation on IPV introduction timelines in countries are the focus of this article, and based on lessons learned with the IPV introductions, it is recommended for future health programs with accelerated scale up of programs, to take a cautious approach on supply commitments, putting in place clear allocation criteria in case of shortages or delays and establishing a communication strategy vis a vis beneficiaries. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

Practical switching power supply design

CERN Document Server

Brown, Martin C

1990-01-01

Take the ""black magic"" out of switching power supplies with Practical Switching Power Supply Design! This is a comprehensive ""hands-on"" guide to the theory behind, and design of, PWM and resonant switching supplies. You'll find information on switching supply operation and selecting an appropriate topology for your application. There's extensive coverage of buck, boost, flyback, push-pull, half bridge, and full bridge regulator circuits. Special attention is given to semiconductors used in switching supplies. RFI/EMI reduction, grounding, testing, and safety standards are also deta

Pricing Strategies in Information Goods in Data Supply Chain

OpenAIRE

Xinming Li; Huaqing Wang

2018-01-01

By focusing on new features of data products and, based on game theoretical models, we study three pricing mechanisms’ performance and their effects on the participants in the data industry from the data supply chain perspective. A win-win pricing strategy for the players in the data supply chain is proposed. We obtain analytical solutions in each pricing mechanism, including the decentralized and centralized pricing, Nash Bargaining pricing, and revenue sharing mechanism. Our findings show t...

Oil supply security -- Emergency response of IEA countries 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-29

When Hurricane Katrina hit the Gulf of Mexico in 2005, the region's oil production and refining infrastructure was devastated and world energy markets were disrupted. The International Energy Agency decided in a matter of days to bring 60 million barrels of additional oil to the market. The emergency response system worked - the collective action helped to stabilise global markets. Since its founding in 1974, oil supply security has been a core mission of the IEA and the Agency has improved its mechanisms to respond to short-term oil supply disruptions. Nevertheless, numerous factors will continue to test the delicate balance of supply and demand. Oil demand growth will continue to accelerate in Asia; oil will be increasingly produced by a shrinking number of countries; and capacities in the supply chain will need to expand. These are just a few of the challenges facing an already tight market. What are the emergency response systems of IEA countries? How are their emergency structures organised? How prepared is the IEA to deal with an oil supply disruption? This publication addresses these questions. It presents another cycle of rigorous reviews of the emergency response mechanisms of IEA member countries. The goal of these reviews is to ensure that the IEA stays ready to respond effectively to oil supply disruptions. This publication also includes overviews of how China, India and countries of Southeast Asia are progressing with domestic policies to improve oil supply security, based on emergency stocks.

Oil supply security -- Emergency response of IEA countries 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-29

When Hurricane Katrina hit the Gulf of Mexico in 2005, the region's oil production and refining infrastructure was devastated and world energy markets were disrupted. The International Energy Agency decided in a matter of days to bring 60 million barrels of additional oil to the market. The emergency response system worked - the collective action helped to stabilise global markets. Since its founding in 1974, oil supply security has been a core mission of the IEA and the Agency has improved its mechanisms to respond to short-term oil supply disruptions. Nevertheless, numerous factors will continue to test the delicate balance of supply and demand. Oil demand growth will continue to accelerate in Asia; oil will be increasingly produced by a shrinking number of countries; and capacities in the supply chain will need to expand. These are just a few of the challenges facing an already tight market. What are the emergency response systems of IEA countries? How are their emergency structures organised? How prepared is the IEA to deal with an oil supply disruption? This publication addresses these questions. It presents another cycle of rigorous reviews of the emergency response mechanisms of IEA member countries. The goal of these reviews is to ensure that the IEA stays ready to respond effectively to oil supply disruptions. This publication also includes overviews of how China, India and countries of Southeast Asia are progressing with domestic policies to improve oil supply security, based on emergency stocks.

Concurrent Product & Supply Chain Creation

DEFF Research Database (Denmark)

Gubi, Ebbe

it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

Halalan Toyyiban Supply Chain The New Insights in Sustainable Supply Chain Management

OpenAIRE

Omar, Emi Normalina; Jaafar, Harlina Suzana; Osman, Muhamad Rahimi; Nasruddin, Faisol

2013-01-01

Purpose: In today’s highly competitive world scenario, in order for logistics and supply chain firms to be successful, resilient and sustainable, halalan-toyyiban supply chain could be the new insight in assisting the firm. Hence, the purpose of this study is to provide a practical definition for developing an effective supply chain through halalan toyyiban processes and comparing the similarities and differences of the halal term. Design/methodology/approach: The analysis is develo...

Supply of basic food, energy, and energy-supplying foodstuffs to the population of Jordan

Energy Technology Data Exchange (ETDEWEB)

Hamdan, M R

1979-04-27

The supply of energy and energy-supplying foodstuffs to the population of Jordan is determined on a regional basis. Food is supplied by the agricultural sector and by imports. The influence of prices on foreign trade and consumption is analyzed. The investigation shows that most of the food supplied is of vegetable origin. The demand for animal protein is covered by 82% on an average. There are no symptoms of malnutrition among the population.

Transistor-based filter for inhibiting load noise from entering a power supply

Science.gov (United States)

Taubman, Matthew S

2013-07-02

A transistor-based filter for inhibiting load noise from entering a power supply is disclosed. The filter includes a first transistor having an emitter coupled to a power supply, a collector coupled to a load, and a base. The filter also includes a first capacitor coupled between the base of the first transistor and a ground terminal. The filter further includes an impedance coupled between the base and a node between the collector and the load, or a second transistor and second capacitor. The impedance can be a resistor or an inductor.

Pricing Decisions of a Dual-Channel Supply Chain considering Supply Disruption Risk

Directory of Open Access Journals (Sweden)

Yancong Zhou

2018-01-01

Full Text Available Supply disruption may cause strong complaints of customers, which is a cost loss for the firms in the supply chain. Obviously, if realizing that there is the disruption risk, the members in a supply chain will adjust their decisions. For analyzing the influence, we consider a popular supply chain mode with dual channels, where one manufacturer has its direct sales channel and one traditional retailer channel. The manufacturer may suffer a supply disruption so that all ordered products by the retailer or the direct retail channel will be lost, and the members in supply chain will bear the corresponding disruption penalty from the customers. By considering four structures with different market power relations, the closed-form optimal price decisions of the four models are given. We found that the disruption factor improves the sales prices for any member structure as compared to the supply chain without the disruption. And the direct retail prices in the different modes are the same as each other, but the price of the traditional channel is influenced by the market share. And the sorts of the sales prices under different structures are given. We also conduct some extensive numerical analysis and compare the results under different structures. We observe that the expected optimal profits of considering the external penalty are smaller than those of no external penalty, and we give a sort of the optimal expected profits. And we also provide the effects of some parameters on the optimal decisions and the optimal expected profits.

Air Force Supply Management Analysis of Activity Groups Financial Reports, Prices, and Cash Management

National Research Council Canada - National Science Library

1998-01-01

The Air Force supply management activity group provides about two million types of inventory items, including weapon system spare parts, fuels, and medical-dental supplies, to customers which consist...

Robust environmental closed-loop supply chain design under uncertainty

International Nuclear Information System (INIS)

MA, Ruimin; YAO, Lifei; JIN, Maozhu; REN, Peiyu; LV, Zhihan

2016-01-01

With the fast developments in product remanufacturing to improve economic and environmental performance, an environmental closed-loop supply (ECLSC) chain is important for enterprises' competitiveness. In this paper, a robust ECLSC network is investigated which includes multiple plants, collection centers, demand zones, and products, and consists of both forward and reverse supply chains. First, a robust multi-objective mixed integer nonlinear programming model is proposed to deal with ECLSC considering two conflicting objectives simultaneously, as well as the uncertain nature of the supply chain. Cost parameters of the supply chain and demand fluctuations are subject to uncertainty. The first objective function aims to minimize the economical cost and the second objective function is to minimize the environmental influence. Then, the proposed model is solved as a single-objective mixed integer programming model applying the LP-metrics method. Finally, numerical example has been presented to test the model. The results indicate that the proposed model is applicable in practice.

Economics of alternative energy supply in New Zealand

Energy Technology Data Exchange (ETDEWEB)

Walker, B. V.

1977-10-15

Alternative means of supplying the main categories of energy demand in New Zealand are examined, using a common economic basis. In this context alternative means are defined to include those not presently in significant large-scale use in New Zealand but which have been demonstrated to be broadly technically feasible. Energy demand is conveniently divided into four categories each corresponding to a grade of energy required and each including all relevant demand in households, commerce, and industry. These categories are called low-grade heat, process heat, transport, and high-grade energy. The high-grade energy market is largely satisfied only by electricity and alternative means of supplying electricity are considered by other authors. The remaining categories are discussed. The comparison of alternatives includes a brief examination of how the comparative economics are affected by the economic criteria used and particularly the cash flow discount rate. The results obtained are of scoping accuracy only but some policy implications are suggested.

Dynamics of global supply chain and electric power networks: Models, pricing analysis, and computations

Science.gov (United States)

Matsypura, Dmytro

In this dissertation, I develop a new theoretical framework for the modeling, pricing analysis, and computation of solutions to electric power supply chains with power generators, suppliers, transmission service providers, and the inclusion of consumer demands. In particular, I advocate the application of finite-dimensional variational inequality theory, projected dynamical systems theory, game theory, network theory, and other tools that have been recently proposed for the modeling and analysis of supply chain networks (cf. Nagurney (2006)) to electric power markets. This dissertation contributes to the extant literature on the modeling, analysis, and solution of supply chain networks, including global supply chains, in general, and electric power supply chains, in particular, in the following ways. It develops a theoretical framework for modeling, pricing analysis, and computation of electric power flows/transactions in electric power systems using the rationale for supply chain analysis. The models developed include both static and dynamic ones. The dissertation also adds a new dimension to the methodology of the theory of projected dynamical systems by proving that, irrespective of the speeds of adjustment, the equilibrium of the system remains the same. Finally, I include alternative fuel suppliers, along with their behavior into the supply chain modeling and analysis framework. This dissertation has strong practical implications. In an era in which technology and globalization, coupled with increasing risk and uncertainty, complicate electricity demand and supply within and between nations, the successful management of electric power systems and pricing become increasingly pressing topics with relevance not only for economic prosperity but also national security. This dissertation addresses such related topics by providing models, pricing tools, and algorithms for decentralized electric power supply chains. This dissertation is based heavily on the following

A new VME based high voltage power supply for large experiments

Energy Technology Data Exchange (ETDEWEB)

Ahn, S.C.; Angstadt, R.D.; Droege, T.F.; Johnson, M.E.; MacKinnon, B.A.; McNulty, S.E.; Shea, M.F.; Thompson, R.N.; Watson, M.M. (Fermi National Accelerator Lab., Batavia, IL (United States)); Franzini, P. (Columbia Univ., New York, NY (United States)); Jones, A.A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Lopez, M.L. (La Plata Univ. Nacional (Argentina)); Wimpenny, S.J.; Yang, M.J

1991-11-01

A new VME based high voltage power supply has been developed for the D{O} experiment at Fermilab. There are three types of supplies delivering up to {plus minus}5.6 kV at 1.0 mA or +2.0 kV at 3.0 mA with a set accuracy of 1.5 V and extremely low voltage ripples. Complete computer control has allowed many special features to be developed for the supply, including user-defined control land monitor groups, variable ramp rates, and advanced histogram and graphic functions. 3 refs.

Design and Implement of Low Ripple and Quasi-digital Power Supply

Science.gov (United States)

Xiangli, Li; Yanjun, Wei; Hanhong, Qi; Yan, Ma

A switch linearity hybrid power supply based on single chip microcomputer is designed which merged the merits of the switching and linear power supply. Main circuit includes pre-regulator which works in switching mode and series regulator which works in linear mode. Two-stage regulation mode was adopted in the main circuit of the power. A single chip computer (SCM) and high resolution of series D/A and A/D converters are applied to control and measurement which achieved continuous adjustable and low ripple constant current or voltage power supply

A new VME based high voltage power supply for large experiments

International Nuclear Information System (INIS)

Ahn, S.C.; Angstadt, R.D.; Droege, T.F.; Johnson, M.E.; MacKinnon, B.A.; McNulty, S.E.; Shea, M.F.; Thompson, R.N.; Watson, M.M.; Franzini, P.; Jones, A.A.; Lopez, M.L.; Wimpenny, S.J.; Yang, M.J.

1991-11-01

A new VME based high voltage power supply has been developed for the D OE experiment at Fermilab. There are three types of supplies delivering up to ±5.6 kV at 1.0 mA or +2.0 kV at 3.0 mA with a set accuracy of 1.5 V and extremely low voltage ripples. Complete computer control has allowed many special features to be developed for the supply, including user-defined control land monitor groups, variable ramp rates, and advanced histogram and graphic functions. 3 refs

Mackenzie Gas Project : gas resource and supply study

International Nuclear Information System (INIS)

Harris, D.G.; Braaten, K.M.

2004-01-01

A study was conducted to assess the future gas supply for the Mackenzie Gas Project. The economically recoverable gas resources and deliverability in the region were assessed in order to support construction of the Mackenzie Valley pipeline and the associated gathering system. This supply study was based on a 25 year timeframe for resource development. Production forecasts were also prepared for 50 years following the date of the study. Natural gas forecasts for the general area to be served by the proposed pipeline were also presented. This report includes an introduction to the final gas resource and supply study as well as the regional geology relating to discovered and undiscovered resources. The following regions were included in the study area: onshore Mackenzie Delta including the Niglintgak, Parsons Lake and Taglu anchor fields; central Mackenzie Valley region extending from the Mackenzie Delta south to 63 degrees latitude; northern portion of the Yukon Territory; and, portions of the offshore Mackenzie Delta region limited to a water depth of 30 metres. Forecasts and economic analyses were prepared for the following 3 scenarios: contingent onshore resources only; contingent and prospective onshore resources; and, contingent and prospective onshore and offshore resources. Sensitivity forecasts were prepared for a fully expanded pipeline capacity of 1.8 bcf/day with an equal capacity gathering system. In addition, the National Energy Board estimates of resources for the 3 anchor field were used in place of the operator's estimates. A geological review was included for the plays in the study area. 15 refs., 43 tabs., 38 figs

Supply Chain Management

DEFF Research Database (Denmark)

Wieland, Andreas; Handfield, Robert B.

Supply chain management has made great strides in becoming a discipline with a standalone body of theories. As part of this evolution, researchers have sought to embed and integrate observed supply chain management phenomena into theoretical statements. In our review, we explore where we have been...

The Tax-Efficient Supply Chain

DEFF Research Database (Denmark)

Webber, Stuart

2011-01-01

Many multinational enterprises are restructuring supply chains to reduce their cost structures. As trade barriers fall and communications technologies improve, it has become easier and more cost-effective to manage business operations across international borders. This has motivated businesses...... practitioners in France, South Africa, Switzerland, Mexico, Argentina, and the United States. Companies are restructuring their supply chains and simultaneously reducing their income tax obligations. This article demonstrates that MNEs should link income tax and supply chain considerations when restructuring...... their supply chains, and they should endeavor to maximize net income when doing so. This recommendation differs from the great majority of supply chain literature, which has generally recommended that businesses seek to minimize pretax costs. One of the most important activities for both supply chain and tax...

NASA Ames Research Center 60 MW Power Supply Modernization

Science.gov (United States)

Choy, Yuen Ching; Ilinets, Boris V.; Miller, Ted; Nagel, Kirsten (Technical Monitor)

2001-01-01

The NASA Ames Research Center 60 MW DC Power Supply was built in 1974 to provide controlled DC power for the Thermophysics Facility Arc Jet Laboratory. The Power Supply has gradually losing reliability due to outdated technology and component life limitation. NASA has decided to upgrade the existing rectifier modules with contemporary high-power electronics and control equipment. NASA plans to complete this project in 2001. This project includes a complete replacement of obsolete thyristor stacks in all six rectifier modules and rectifier bridge control system. High power water-cooled thyristors and freewheeling diodes will be used. The rating of each of the six modules will be 4000 A at 5500 V. The control firing angle signal will be sent from the Facility Control System to six modules via fiberoptic cable. The Power Supply control and monitoring system will include a Master PLC in the Facility building and a Slave PLC in each rectifier module. This system will also monitor each thyristor level in each stack and the auxiliary equipment.

B-Plant canyon fire foam supply

International Nuclear Information System (INIS)

Gainey, T.

1995-01-01

A new raw water supply was installed for the B-Plant fire foam system. This document details tests to be performed which will demonstrate that the system can function as designed. The tests include: Verification of the operation of the automatic valves at the cells; Measurement of water flow and pressure downstream of the proportioner; Production of foam, and measurement of foam concentration. Included as an appendix is a copy of the work package resolution (J4 ampersand J4a)

Public supply and domestic water use in the United States, 2015

Science.gov (United States)

Dieter, Cheryl A.; Maupin, Molly A.

2017-10-30

IntroductionThe U.S. Geological Survey (USGS) National Water Use Science Project (NWUSP), part of the USGS Water Availability and Use Science Program (WAUSP), has estimated water use in the United States every 5 years since 1950. This report provides an overview of total population, public-supply use, including the population that is served by public-supply systems and the domestic deliveries to those users, and self-supplied domestic water use in the United States for 2015, continuing the task of estimating water use in the United States every 5 years. In this report, estimates for the United States include the 50 States, the District of Columbia, Puerto Rico, and the U.S. Virgin Islands (hereafter referred to as “states” for brevity).County-level data for total population, public-supply withdrawals and the population served by public-supply systems, and domestic withdrawals for 2015 were published in a data release in an effort to provide data to the public in a timely manner. Data in the current version (1.0) of Dieter and others (2017) contains county-level total withdrawals from groundwater and surface-water sources (both fresh and saline) for public-water supply, the deliveries from those suppliers to domestic users, and the quantities of water from groundwater and surface-water sources for self-supplied domestic users, and total population. Methods used to estimate the various data elements for the public-supply and domestic use categories at the county level are described by Bradley (2017).This Open-File Report is an interim report summarizing the data published in Dieter and others (2017) at the state and national level. This report includes discussions on the total population, totals for public-supply withdrawals and population served, total domestic withdrawals, and provides comparisons of the 2015 estimates to 2010 estimates (Maupin and others, 2014). Total domestic water use, as described in this report, represents the summation of deliveries from

43 CFR 404.51 - Are proposed projects under the Rural Water Supply Program reviewed by the Administration?

Science.gov (United States)

2010-10-01

... Water Supply Program reviewed by the Administration? 404.51 Section 404.51 Public Lands: Interior... SUPPLY PROGRAM Feasibility Studies § 404.51 Are proposed projects under the Rural Water Supply Program... the Reclamation's Rural Water Supply Program. This includes review under Executive Order 12322 to...

A computer model of the MFTF-B neutral beam accel dc power supply

International Nuclear Information System (INIS)

Wilson, J.H.

1983-01-01

Using the SCEPTRE circuit modeling code, a computer model was developed for the MFTF Neutral Beam Power Supply System (NBPSS) Accel DC Power Supply (ADCPS). The ADCPS provides 90 kV, 88 A, to the Accel Modulator. Because of the complex behavior of the power supply, use of the computer model is necessary to adequately understand the power supply's behavior over a wide range of load conditions and faults. The model developed includes all the circuit components and parameters, and some of the stray values. The model has been well validated for transients with times on the order of milliseconds, and with one exception, for steady-state operation. When using a circuit modeling code for a system with a wide range of time constants, it can become impossible to obtain good solutions for all time ranges at once. The present model concentrates on the millisecond-range transients because the compensating capacitor bank tends to isolate the power supply from the load for faster transients. Attempts to include stray circuit elements with time constants in the microsecond and shorter range have had little success because of hugh increases in computing time that result. The model has been successfully extended to include the accel modulator

Operation of SST-1 TF power supply during SST-1 campaigns

International Nuclear Information System (INIS)

Sharma, Dinesh Kumar; Vora, Murtuza M.; Ojha, Amit; Singh, Akhilesh Kumar; Bhavsar, Chirag

2015-01-01

Highlights: • SST-1 TF power supply is 12 pulse SCR converter circuit. • TF power supply protection, measurement and control scheme are explained. • Quench, emergency and normal shot process is explained and results of SST-1 campaigns are shown. • Dynamic control of TF current. • The paper shows the results of last ten SST-1 campaigns. - Abstract: SST-1 TF power supply provides the direct current for the required magnetic field of TF coil. TF power supply includes transformer, 12-pulse converter, bus bar, water-cooled cable, protection and measuring equipments, and isolator, VME DAC system and GUI software. TF power supply is operated through GUI software built in TCL/Tk. VME DAC system monitors the parameters, provides On/Off commands, voltage and current references and initiates predefined reference to emergency shutdown. The emergency shutdown is hardwired to TF power supply from central control. During quench power supply converter opens DCCB and dump resistor is connected in the circuit and VME DAC system acquires bus bar voltage, dump voltage and dump current. Operation of TF power supply also requires monitoring of SCR and transformer temperature and water flow rate of water-cooled cable during high current long pulse shot. Before start up of TF power supply a quench simulation is performed to check the readiness of protection. This paper describes pre startup operation, normal shot operation, emergency and quench process, dynamic control and complete shutdown operation of TF power supply.

Operation of SST-1 TF power supply during SST-1 campaigns

Energy Technology Data Exchange (ETDEWEB)

Sharma, Dinesh Kumar, E-mail: dinesh@ipr.res.in; Vora, Murtuza M.; Ojha, Amit; Singh, Akhilesh Kumar; Bhavsar, Chirag

2015-10-15

Highlights: • SST-1 TF power supply is 12 pulse SCR converter circuit. • TF power supply protection, measurement and control scheme are explained. • Quench, emergency and normal shot process is explained and results of SST-1 campaigns are shown. • Dynamic control of TF current. • The paper shows the results of last ten SST-1 campaigns. - Abstract: SST-1 TF power supply provides the direct current for the required magnetic field of TF coil. TF power supply includes transformer, 12-pulse converter, bus bar, water-cooled cable, protection and measuring equipments, and isolator, VME DAC system and GUI software. TF power supply is operated through GUI software built in TCL/Tk. VME DAC system monitors the parameters, provides On/Off commands, voltage and current references and initiates predefined reference to emergency shutdown. The emergency shutdown is hardwired to TF power supply from central control. During quench power supply converter opens DCCB and dump resistor is connected in the circuit and VME DAC system acquires bus bar voltage, dump voltage and dump current. Operation of TF power supply also requires monitoring of SCR and transformer temperature and water flow rate of water-cooled cable during high current long pulse shot. Before start up of TF power supply a quench simulation is performed to check the readiness of protection. This paper describes pre startup operation, normal shot operation, emergency and quench process, dynamic control and complete shutdown operation of TF power supply.

A unique power supply for the PEP II klystron at SLAC

International Nuclear Information System (INIS)

Cassel, R.; Nguyen, M.N.

1997-07-01

Each of the eight 1.2 MW RF klystrons for the PEP-II storage rings require a 2.5 MVA DC power supply of 83 Kv at 23 amps. The design for the supply was base on three factors, low cost, small size to fit existing substation pads, and good protection against damage to the klystron including klystron gun arcs. The supply uses a 12 pulse 12.5 KV primary thyristor star point controller with primary filter inductor to provide rapid voltage control, good voltage regulation, and fast turn off during klystron tube faults. The supply also uses a unique secondary rectifier, filter capacitor configuration to minimize the energy available under a klystron fault. The voltage control is from 0--90 KV with a regulation of < 0.1% and voltage ripple of < 1% P-P, (< 0.2% RMS) above 60 KV. The supply utilizes a thyristor crowbar, which under a klystron tube arc limits the energy in the klystron arc to < 5 joules. If the thyristor crowbar is disabled the energy supplied is < 40 joules into the arc. The size of the supply was reduced small enough to fit the existing PEP transformer yard pads. The cost of the power supply was < $140 per KVA

Developing a Framework for Traceability Implementation in the Textile Supply Chain

Directory of Open Access Journals (Sweden)

Vijay Kumar

2017-04-01

Full Text Available Traceability has recently gained considerable attention in the textile industry. Traceability stands for information sharing about a product including the product history, specification, or location. With the involvement of globally dispersed actors in the textile supply chain, ensuring appropriate product quality with timely supplies is crucial for surviving in this industry with ever increasing competition. Hence it is of paramount importance for a supply chain actor to track every product and trace its history in the supply chain. In this context, this paper presents a framework to implement traceability in the textile supply chain. A system approach has been followed, where firstly the usage requirement of traceability is defined, and then a framework for implementing intra-actor or internal traceability and inter-actor or external traceability is discussed. This article further presents a sequential diagram to demonstrate the interaction and information exchange between the actors in the supply chain, when the traceability information is requested. An example is also illustrated for data storage using a relational database management system and information exchange using XML for the textile weaver. Finally, the article discusses challenges and future studies required to implement traceability in the textile supply chain.

Increasing Supply-Chain Visibility with Rule-Based RFID Data Analysis

DEFF Research Database (Denmark)

Ilic, A.; Andersen, Thomas; Michahelles, F.

2009-01-01

RFID technology tracks the flow of physical items and goods in supply chains to help users detect inefficiencies, such as shipment delays, theft, or inventory problems. An inevitable consequence, however, is that it generates huge numbers of events. To exploit these large amounts of data, the Sup......RFID technology tracks the flow of physical items and goods in supply chains to help users detect inefficiencies, such as shipment delays, theft, or inventory problems. An inevitable consequence, however, is that it generates huge numbers of events. To exploit these large amounts of data......, the Supply Chain Visualizer increases supply-chain visibility by analyzing RFID data, using a mix of automated analysis techniques and human effort. The tool's core concepts include rule-based analysis techniques and a map-based representation interface. With these features, it lets users visualize...

New design for the anode power supply of a gyrotron

International Nuclear Information System (INIS)

Fasel, D.; Alberti, S.; Favre, A.; Perez, A.; Acero, J.; Ganuza, D.; Garcia, I.; Lucia, C.

1998-01-01

The introduction will remind the main supply structure installed in the CRPP, related to the ECRH (Electron Cyclotron Resonance Heating) project on the TCV (Tokamak Configuration Variable) tokamak. Then this paper concentrates on the description of the power source designed to supply the anode of the triode type gyrotron. First the requirements asked for this power supply will be presented, taking into account the possible feeding structures in relation with the existing HV DC cathode power supply. The following section will focus on the selected design, describing in details the power structure based on MOSFET, referred to the cathode potential. Afterwards the control electronics is presented, including the feedback control implemented, the HV measurements, the internal reference generator and the interface to the TCV control. Finally, the last section will give information on the project status. (author)

IEA Response System for Oil Supply Emergencies (2012 update)

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-05

Emergency response to oil supply disruptions has remained a core mission of the International Energy Agency since its founding in 1974. This information pamphlet explains the decisionmaking process leading to an IEA collective action, the measures available -- focusing on stockdraw -- and finally, the historical background of major oil supply disruptions and the IEA response to them. It also demonstrates the continuing need for emergency preparedness, including the growing importance of engaging key transition and emerging economies in dialogue about energy security.

Implementation of DMAs in Intermittent Water Supply Networks Based on Equity Criteria

Directory of Open Access Journals (Sweden)

Amilkar E. Ilaya-Ayza

2017-11-01

Full Text Available Intermittent supply is a common way of delivering water in many developing countries. Limitations on water and economic resources, in addition to poor management and population growth, limit the possibilities of delivering water 24 h a day. Intermittent water supply networks are usually designed and managed in an empirical manner, or using tools and criteria devised for continuous supply systems, and this approach can produce supply inequity. In this paper, an approach based on the hydraulic capacity concept, which uses soft computing tools of graph theory and cluster analysis, is developed to define sectors, also called district metered areas (DMAs, to produce an equitable water supply. Moreover, this approach helps determine the supply time for each sector, which depends on each sector’s hydraulic characteristics. This process also includes the opinions of water company experts, the individuals who are best acquainted with the intricacies of the network.

Control of supply temperature

Energy Technology Data Exchange (ETDEWEB)

Madsen, H; Nielsen, T S; Soegaard, H T

1996-09-01

For many district heating systems, e.g. the system in Hoeje Taastrup, it is desirable to minimize the supply temperature from the heat production unit(s). Lower supply temperature implies lower costs in connection with the production and distribution of heat. Factors having impact on the heat demand are for instance solar radiation, wind speed, wind direction and a climate independent part, which is a function of the time of the day/week/year. By applying an optimization strategy, which minimizes the supply temperature, it is assumed that optimal economical operation can be obtained by minimizing the supply temperature and thereby the heat losses in the system. The models and methods described in this report take such aspects into account, and can therefore be used as elements in a more efficient minimization of the supply temperature. The theoretical part of this report describes models and methods for optimal on-line control of the supply temperature in district heating systems. Some of the models and methods have been implemented - or are going to be implemented - in the computer program PRESS which is a tool for optimal control of supply temperature and forecasting of heat demand in district heating systems. The principles for using transfer function models are briefly described. The ordinary generalized predictive control (OGPC) method is reviewed, and several extensions of this method are suggested. New controller, which is called the extended generalized predictive controller (XGPC), is described. (EG) 57 refs.

Optimal Dynamics of Intermittent Water Supply

Science.gov (United States)

Lieb, Anna; Wilkening, Jon; Rycroft, Chris

2014-11-01

In many urban areas of the developing world, piped water is supplied only intermittently, as valves direct water to different parts of the water distribution system at different times. The flow is transient, and may transition between free-surface and pressurized, resulting in complex dynamical features with important consequences for water suppliers and users. These consequences include degradation of distribution system components, compromised water quality, and inequitable water availability. The goal of this work is to model the important dynamics and identify operating conditions that mitigate certain negative effects of intermittent water supply. Specifically, we will look at valve parameters occurring as boundary conditions in a network model of transient, transition flow through closed pipes. Optimization will be used to find boundary values to minimize pressure gradients and ensure equitable water availability.

The role of PV electricity generation in fully renewable energy supply systems

International Nuclear Information System (INIS)

Lehmann, H.; Peter, S.

2004-01-01

A sustainable energy supply will be based on renewable energies and it must use available resources efficiently. Earlier or later the energy supply will rely completely on renewable sources. A solar energy system that provides a reliable energy supply throughout the year includes the consistent use of local renewable energy sources (e.g. PV) wherever possible. Using Japan as a example it was shown that the vision of a full renewable energy supply, even with high shares of domestic sources is possible. Detailed simulations of such a system show that the PV systems play an important role delivering electricity at peak demand times. (authors)

Contribution of components of Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement-A Pilot Empirical Study of the Indian Automobile Manufacturing Sector

OpenAIRE

Mohd. Asif Gandhi

2017-01-01

This paper is one of the several extensions of the research works done by [5]. Green Supply Chain Practices have been known to have an impact on Green Supply Chain Performance [5].This paper tests empirically through a pilot study of the Indian Automobile Manufacturing Sector, the contribution of the three variables constituting the construct Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement. Also the paper establishes the reliability of the questionnaire...

Petroleum supply monthly, October 1998, with data for August 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. A feature article, Accuracy of petroleum supply data, is also included. 72 tabs.

Research on assurance system of nuclear fuel supply (Contract research)

International Nuclear Information System (INIS)

Kobayashi, Naoki; Naoi, Yosuke; Wakabayashi, Shuji; Tazaki, Makiko; Senzaki, Masao

2010-08-01

Assurance of supply (AOS) of nuclear fuel is a special arrangement in case of nuclear fuel supply disruption caused by political reasons other than nonproliferation. It aims to support a stable supply of nuclear fuel while avoiding spread of sensitive enrichment technology. Current discussions on AOS have been initiated by the IAEA Director-General's article published in The Economist entitled 'Towards a Safer World' Oct. 2003. Since then, various proposals on AOS have been presented. In order to facilitate international discussions on AOS, authors have conducted studies of AOS system based on Japanese Government's proposal 'IAEA Standby Arrangement System (INFCIRC/683)'. In this paper, we have been able to discuss feasibility of AOS system more specifically by including additional costs and period required for AOS, and to present a system which could work as a practical system. Issues we have tried to tackle here include definitions of AOS, and roles of consumer States, supplier States, IAEA and nuclear industries. We present some solutions including broadening coverage of AOS, declaration by supplier States on AOS, establishing advisory committee in the IAEA on the actual application of AOS, and setting up an IAEA fund for AOS. (author)

Position Paper on Intelligent Supply Chains

DEFF Research Database (Denmark)

Møller, Charles

This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further explorati...... of intelligent supply chains. It is concluded that information management is critical to intelligent supply chains and a research agenda is outlined.......This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further exploration...... the concept of Intelligent Supply Chain and to establish an overall perspective based on information management. The claim made here is that the notion of the intelligent enterprise contributes with a new perspective on supply chain management that addresses the current challenges in an industrial supply...

SUPPLY CHAIN MANAGEMENT – KEY FACTORS

Directory of Open Access Journals (Sweden)

Magdalena Daniela DINU

2014-06-01

Full Text Available This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of both Supply Chain’ s components, procedures, workflow, processes and the importance of Supply Chain Management into maximizing company's value. SCORE model able to provide solid information about measuring performance and identifying priorities within Supply Chain Management will help us to understand the key factors by analyzing its elements: Plan, Source, Make, Deliver,Return, Enable. These elements covers all the challenging areas from first to third tier of Supply Chain Management.

Speaker's presentations. Energy supply security

International Nuclear Information System (INIS)

Pierret, Ch.

2000-01-01

This document is a collection of most of the papers used by the speakers of the European Seminar on Energy Supply Security organised in Paris (at the French Ministry of Economy, Finance and Industry) on 24 November 2000 by the General Direction of Energy and Raw Materials, in co-operation with the European Commission and the French Planning Office. About 250 attendees were present, including a lot of high level Civil Servants from the 15 European State members, and their questions have allowed to create a rich debate. It took place five days before the publication, on 29 November 2000, by the European Commission, of the Green Paper 'Towards a European Strategy for the Security of Energy Supply'. This French initiative, which took place within the framework of the European Presidency of the European Union, during the second half-year 2000. will bring a first impetus to the brainstorming launched by the Commission. (author)

U.S. uranium supply outlook

International Nuclear Information System (INIS)

Hogerton, J.F.

1977-01-01

The subject is analysed in the light of figures and forecasts contained in the following diagrams: forecasts of U.S. uranium production, 1977 to 1990; indicated relationship between annual U.S. uranium supply and demand, 1977 to 1986; presently indicated cumulative U.S. uranium supply/demand balance, 1977 to 1990; indicated cumulative U.S. supply/demand balance (shortage or surpluses) 1976 to 1990; presently indicated balance between outstanding U.S. utility procurement needs and uncommitted domestic supply capability 1977 to 1986; projected U.S. uranium requirements in relation to existing supply base and presently indicated additional domestic resource potential, 1977 to 2000. (U.K.)

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

Science.gov (United States)

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

Innovation Across the Supply Chain

DEFF Research Database (Denmark)

Druehl, Cheryl; Carrillo, Janice; Hsuan, Juliana

Innovation is an integral part of every firm’s ongoing operations. Beyond product innovation, supply chain innovations offer a unique source of competitive advantage. We synthesize recent research on innovation in the supply chain, specifically, innovative supply chain processes...

Lean and reliable digital supply chains - case study

Directory of Open Access Journals (Sweden)

Marcin Hajdul

2015-03-01

Full Text Available Background: Existing business model supply chains organisation results in inefficient use of transport resources, high transport costs, increasing congestions and CO2 emission. This effect has been demonstrated by research conducted by the author as well as by the European Environmental Agency. To change this situation companies are in need of affordable, realisable and trusted data-interchange solutions to take part in international trade and commerce flows. The aim of this paper is to present practical implementation of the developed by the authors concept of global freight management ecosystem and its practical implementation using T-Traco platform. Methods: Survey, desk research and real case study results were used in the paper. Reults and conclusions: Real time and global data exchange within the whole supply (including modes of transport and transport units chain is a backbone of the lean and reliable digital supply chain.

Energy discharge heater power supply

International Nuclear Information System (INIS)

Jaskierny, W.

1992-11-01

The heater power supply is intended to supply capacitively stored,energy to embedded heater strips in cryo magnets. The amount of energy can be controlled by setting different charge different capacitor values. Two chassis' can be operated in series or interlocks are provided. The charge voltage, number of capacitors pulse can be monitored. There and dual channel has two discharge supplies in one chassis. This report reviews the characteristics of this power supply further

D. C. power supply

Energy Technology Data Exchange (ETDEWEB)

Ohashi, N. Watanabe, Y.; Kitani, M

1978-04-01

DC power supplies are for ordinary and emergency use as power sources for various structures such as office buildings, department stores, hotels, and for facilities such as roads, tunnels, dams, power stations, etc. There is strong demand for these dc power supplies to be safe, automated, and maintenance free, and to have high reliability. A dc power supply which meets these demands is described; electric circuit construction is emphasized. (10 figures, 4 tables)

Switzerland's electricity supply industry

International Nuclear Information System (INIS)

Inwyler, Ch.

1980-01-01

After a short description of Switzerland's electricity supply industry, the author comments on the production and consumption of electrical energy as well as on Switzerland's role within the European grid. A brief survey of electricity supply as a service is followed by a discussion of the political tools (such as e.g. the referendum, the hearing procedure etc.), which are an essential clue for understanding the position of the electricity supply industry in Switzerland. (Auth.)

Optimizing clinical trial supply requirements: simulation of computer-controlled supply chain management.

Science.gov (United States)

Peterson, Magnus; Byrom, Bill; Dowlman, Nikki; McEntegart, Damian

2004-01-01

Computer-controlled systems are commonly used in clinical trials to control dispensing and manage site inventories of trial supplies. Typically such systems are used with an interactive telephone or web system that provide an interface with the study site. Realizing the maximum savings in medication associated with this approach has, in the past, been problematic as it has been difficult to fully estimate medication requirements due to the complexities of these algorithms and the inherent variation in the clinical trial recruitment process. We describe the traditional and automated methods of supplying sites. We detail a simulation approach that models the automated system. We design a number of simulation experiments using this model to investigate the supply strategy properties that influence medication overage and other strategy performance metrics. The computer-controlled medication system gave superior performance to the traditional method. In one example, a 75% overage of wasted medication in the traditional system was associated with higher supply failure than an automated system strategy with an overage of 47%. In a further example, we demonstrate that the impact of using a country stratified as opposed to site stratified scheme affects the number of deliveries and probability of supply failures more than the amount of drug wasted with respective increases of 20, 2300 and 4%. Medication savings with automated systems are particularly significant in repeat dispensing designs. We show that the number of packs required can fall by as much as 50% if one uses a predictive medication algorithm. We conclude that a computer-controlled supply chain enables medication savings to be realized and that it is possible to quantify the distribution of these savings using a simulation model. The simulation model can be used to optimize the prestudy medication supply strategy and for midstudy monitoring using real-time data contained in the study database.

The Supply of Medical Radioisotopes. An Economic Study of the Molybdenum-99 Supply Chain

International Nuclear Information System (INIS)

2010-01-01

The reliable supply of molybdenum-99 (Mo-99) and its decay product, technetium-99m (Tc-99m), is a vital component of modern medical diagnostic practices. Disruptions in the supply chain of these radioisotopes - which cannot be effectively stored - can suspend important medical testing services. Unfortunately, supply reliability has declined over the past decade, due to unexpected or extended shutdowns at the few ageing, Mo-99 producing, research reactors and processing facilities. These shutdowns have created global supply shortages. The full study offers a unique analysis of the economic structure and present state of the Mo-99/Tc-99m supply chain. It finds that the shortages are a symptom of a longer-term problem linked to insufficient capital investment, which has been brought about by an economic structure that does not provide sufficient remuneration for producing Mo-99 or support for developing additional production and processing infrastructure. To assist governments and other decision makers in their efforts to ensure long-term, reliable supply of these important medical isotopes, the study presents options for creating a sustainable economic structure. The study will also enhance understanding amongst stakeholders of the costs of supplying Mo-99 and ultimately contribute to a better functioning market. (authors)

First Nations partnerships in the supply chain

International Nuclear Information System (INIS)

Harrison, D.J.

2004-01-01

This paper provided an overview of Acklands-Grainger Inc., the largest supplier of maintenance, repair and operations products in Canada. Details of the company's vision for the future were provided, with an emphasis on customer-focused delivery channels, leveraging strong relationships with key partners and achieving recognition as a valued member of each community in which they are involved. Details of their current mission are outlined as being a commitment to reducing supply chain and product management and logistics costs, delivering outstanding customer service and maintaining a workforce of engaged and accountable employees. The company's key focus areas were stated as being health and safety, environmental protection, community development and continuous improvement in core business. Details of challenges and drawbacks to the company's supply chain were also provided. Case studies of the company's First Nations partnerships were provided, with details of challenges and opportunities, as well as benefits to Aboriginal partners. The paper concluded by identifying emerging trends in the resource sector, including increased consolidation among distributors, increasing requests for additional supply chain services and increasing selectivity of potential partners. figs

Management Accounting and Supply Chain Strategy

OpenAIRE

Hald, Kim S.; Thrane, Sof

2016-01-01

Research positioned in the intersection between management accounting and supply chain management is increasing. However, the relationship between management accounting and supply chain strategies has been neglected in extant research. This research adds to literature on management accounting and supply chain management through exploring how supply chain strategy and management accounting is related, and how supply chain relationship structure modifies this relation. Building on a contingency...

Supply Chain Management In Construction Revealed

OpenAIRE

Dr. Ghaith Al-Werikat

2017-01-01

The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

Magnet power supply for ISABELLE

International Nuclear Information System (INIS)

Nawrocky, R.J.; Frankel, R.F.; Thomas, M.G.

1979-01-01

The power supply system which will energize the superconducting magnets in the ISABELLE machine consists of some 520 computer-programmable power supplies with outputs ranging from 50 A to 4500 A. Most of the power supplies will be used for the correction of field harmonics, orbit correction and adjustment of the machine working line. During acceleration, currents in various magnet correction coils will be controlled in real time to track the main field; all power supplies must be highly stable during the stacking and storage of the beam (in some cases current regulation must be in the order of 0.001%). PS reference programs will be stored in microprocessor based function generators embedded in each power supply. Due to the large amount of stored energy in the system, the magnets must be protected during quenches. Details of the power supply and of the magnet quench protection system are described

Developing sustainable food supply chains.

Science.gov (United States)

Smith, B Gail

2008-02-27

This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

The role of supply-chain initiatives in reducing deforestation

Science.gov (United States)

Lambin, Eric F.; Gibbs, Holly K.; Heilmayr, Robert; Carlson, Kimberly M.; Fleck, Leonardo C.; Garrett, Rachael D.; le Polain de Waroux, Yann; McDermott, Constance L.; McLaughlin, David; Newton, Peter; Nolte, Christoph; Pacheco, Pablo; Rausch, Lisa L.; Streck, Charlotte; Thorlakson, Tannis; Walker, Nathalie F.

2018-01-01

A major reduction in global deforestation is needed to mitigate climate change and biodiversity loss. Recent private sector commitments aim to eliminate deforestation from a company's operations or supply chain, but they fall short on several fronts. Company pledges vary in the degree to which they include time-bound interventions with clear definitions and criteria to achieve verifiable outcomes. Zero-deforestation policies by companies may be insufficient to achieve broader impact on their own due to leakage, lack of transparency and traceability, selective adoption and smallholder marginalization. Public-private policy mixes are needed to increase the effectiveness of supply-chain initiatives that aim to reduce deforestation. We review current supply-chain initiatives, their effectiveness, and the challenges they face, and go on to identify knowledge gaps for complementary public-private policies.

Power supply for plasma generator of HL-1M neutral beam injector

International Nuclear Information System (INIS)

Wang Detai; Qian Jiamei; Lei Guangjiu; Shun Mengda; Jiang Shaofeng; Wang Enyao; Lu Xuejun; Yang Tiehai; Wang Xuehua; Zhao Zhimin; Hao Ming; Huang Jianrong; Yu Yanqiu; Cheng Baoqiang; Wu Zhige; Sheng Ning; Hu Qingtao

1999-01-01

The diagram of the HL-1M Neutral Beam Injector (NBI) and the power supply (PS) system is shown. The NBI consists of ion source, beam line and power supply system etc. The ion source includes plasma generator and three-electrode extraction system. The power supply for plasma generator consists of a filament PS, an arc PS and gas valve PS. Testing has shown that the PS for plasma generator of the HL-1M NBI has excellent stability and obtain good plasma heating effect

Can efficient supply management in the operating room save millions?

Science.gov (United States)

Park, Kyung W; Dickerson, Cheryl

2009-04-01

Supply expenses occupy an ever-increasing portion of the expense budget in today's increasingly technologically complex operating rooms. Yet, little has been studied and published in the anesthesia literature. This review attempts to bring the topic of supply management to anesthesiologists, who play a significant role in operating room management. Little investigative work has been performed on supply management. Anecdotal reports suggest the benefits of a perpetual inventory system over a periodic inventory system. A perpetual inventory system uses utilization data to update inventory on hand continually and this information is linked to purchasing and restocking, whereas a periodic inventory system counts inventory at some regular intervals (such as annually) and uses average utilization to set par levels. On the basis of application of operational management concepts, ways of taking advantage of a perpetual inventory system to achieve savings in supply expenses are outlined. These include linking the operating room scheduling and supply order system, distributor-driven just-in-time delivery of case carts, continual updating of preference lists based on utilization patterns, increasing inventory turnovers, standardizing surgical practices, and vendor consignment of high unit-cost items such as implants. In addition, Lean principles of visual management and elimination of eight wastes may be applicable to supply management.

Compatibility of Meropenem with Different Commercial Peritoneal Dialysis Solutions.

Science.gov (United States)

Wiesholzer, Martin; Winter, Alexandra; Kussmann, Manuel; Zeitlinger, Markus; Pichler, Petra; Burgmann, Heinz; Reznicek, Gottfried; Poeppl, Wolfgang

♦ BACKGROUND: Intraperitoneal administration of antimicrobial agents is recommended for the treatment of peritoneal dialysis (PD)-related peritonitis. For home-based antimicrobial therapy it is common to supply patients with PD fluid bags with admixed antibiotic. Thus, the compatibility of meropenem with different PD fluids (PDFs), namely Extraneal, Physioneal 1.36% and Physioneal 2.27% (all Baxter Healthcare Corp., Deerfield, IL, USA), was investigated under varying storage conditions. ♦ METHODS: Meropenem (Venus Pharma, Werne, Germany) was stored at 6°C and 25°C over 14 days and at 37°C over 24 hours. Drug concentration over time was determined using high performance liquid chromatography, drug activity by a diffusion disk method, diluent stability by visual inspection and drug adsorption was calculated. Blank PD fluids and deionized water were used as comparator solutions. ♦ RESULTS: Compared to water, the stability of meropenem was minimally lower in Extraneal but markedly reduced in both Physioneal solutions. No significant drug adsorption was detected for any PDF investigated. ♦ CONCLUSIONS: Meropenem is stable and compatible with Extraneal and might be stored for up to a week at refrigeration temperature (6°C). A loss of ~20% of meropenem after 2 days at room temperature should be considered. Mixed Physioneal appears not suitable for storage at any temperature after meropenem has been admixed. A considerable drug degradation due to the warming up to body temperature through heating plates should further be taken into account in clinical practice. Copyright © 2017 International Society for Peritoneal Dialysis.

Managing the Global Supply Chain

DEFF Research Database (Denmark)

Skjøtt-Larsen, Tage; Schary, Philip B.; Mikkola, Juliana Hsuan

The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...... well as current examples of best practice of managing supply chains in a global context....

Managing the Global Supply Chain

DEFF Research Database (Denmark)

Hsuan, Juliana; Skjøtt-Larsen, Tage; Kinra, Aseem

The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... well as current examples of best practice of managing supply chains in a global context....... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...

POTABLE WATER SUPPLY IN OWERRI METROPOLIS: A ...

African Journals Online (AJOL)

address the problems of water supply and management. These include: ..... total replacement of under-laid water pipes has not been done, and there is no modern way .... If the present trend continues, the vast majority of these people will be living ... maintenance and management of water facilities and other logistics.

Designing structural supply chain flexibility

NARCIS (Netherlands)

Mulinski, Ksawery Jan

2012-01-01

In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

Optimisation of a green gas supply chain--a review.

Science.gov (United States)

Bekkering, J; Broekhuis, A A; van Gemert, W J T

2010-01-01

In this review the knowledge status of and future research options on a green gas supply based on biogas production by co-digestion is explored. Applications and developments of the (bio)gas supply in The Netherlands have been considered, whereafter literature research has been done into the several stages from production of dairy cattle manure and biomass to green gas injection into the gas grid. An overview of a green gas supply chain has not been made before. In this study it is concluded that on installation level (micro-level) much practical knowledge is available and on macro-level knowledge about availability of biomass. But on meso-level (operations level of a green gas supply) very little research has been done until now. Future research should include the modeling of a green gas supply chain on an operations level, i.e. questions must be answered as where to build digesters based on availability of biomass. Such a model should also advise on technology of upgrading depending on scale factors. Future research might also give insight in the usability of mixing (partly upgraded) biogas with natural gas. The preconditions for mixing would depend on composition of the gas, the ratio of gases to be mixed and the requirements on the mixture.

Maintaining a balanced electricity supply favours increased nuclear capacity in Finland

International Nuclear Information System (INIS)

Ahti, Toivola

2001-01-01

Finland's electricity supply is based on a balanced mix of energy sources to maximize the security of supply and to keep the volatility of electricity price at a minimum. One third of electricity is obtained from domestic sources hydro, wood and peat. Nuclear power provides one quarter and fossil fuels slightly over one fifth. Electricity imports from neighbour countries cover the rest of the consumption. It is important to maintain this balanced structure also when electricity supply is being increased. Domestic renewable sources are not enough to cover the predicted future needs, and increasing imports would risk the security of supply. Increasing the proportion of fossil fuels is not a generally desired option. Therefore, balanced increase of nuclear capacity has to be included among the choices of future electricity generation. (author)

Supply Chain Management In Construction Revealed

Directory of Open Access Journals (Sweden)

Dr. Ghaith Al-Werikat

2017-03-01

Full Text Available The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

"Bullwhip Effect" in Supply Chains

Directory of Open Access Journals (Sweden)

Anđelko Ščukanec

2007-09-01

Full Text Available The system which connects all the elements between theproducer and the consumer is called the supply chain. This definitionof the supply chain shows its complexity, dynamics anduncertainty. Successful operation of supply chains requires thebest possible coordination of its elements, which obviously indicatesthe utmost importance of the information flow alongthem. The operation of supply chains on the whole has to bemore successful than the operation of their individual elements.It should be noted that such a complex process may give rise toa series of problems, unwanted events, as well as substantial reductionin profits and the level of service. One of such unwantedphenomena which may occur in the supply chain is the"bullwhip effect". This is a possible increase in the diversity oforders which occurs when we move along the elements of thesupply chain (from the customers' orders to the producers' orders.The work analyses the processes within the supply chainsand the occurrence of the bullwhip effect. The main causes ofthe bullwhip effect that we encounter daily in the supply chainshave been clearly defined. The paper also presents the mainnegative consequences of such a disturbance within the supplychains, and provides possible solutions for avoiding the bullwhipeffect.

ENDOGENEITY OF INDONESIAN MONEY SUPPLY

OpenAIRE

Rachma, Meutia Safrina

2011-01-01

There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

Endogeneity Of Indonesian Money Supply

OpenAIRE

Rachma, Meutia Safrina

2010-01-01

There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

Governance In Project Configured Supply Chains

DEFF Research Database (Denmark)

Koch, Christian; Larsen, Casper Schultz; Gottlieb, Stefan Christoffer

2006-01-01

are integrated knowledge, material, workforce and management subsystem deliveries (the building core produced of pre-cast concrete, the elevator supply and the kitchen supply). Further 17 deliveries draws on more than 50 materials and component suppliers. The case project generated 160 failures over three months......This case study covers a Danish architectural, engineering and construction supply network for a specific building project. Failures in supply are used as indicators of the governance forms employed. The following governance forms are present; internal integration and hierarchy, SCM......-efforts, subsystem deliveries and contracting per project. The case exhibits a very uneven integration upstream: Three engineering design areas are integrated with production and the client function. Amongst supplies, the architectural design is the most 'clean-cut' knowledge supply, whereas the supplies...

An exploration in mineral supply chain mapping using tantalum as an example

Science.gov (United States)

Soto-Viruet, Yadira; Menzie, W. David; Papp, John F.; Yager, Thomas R.

2013-01-01

This report uses the supply chain of tantalum (Ta) to investigate the complexity of mineral and metal supply chains in general and show how they can be mapped. A supply chain is made up of all the manufacturers, suppliers, information networks, and so forth, that provide the materials and parts that go into making up a final product. The mineral portion of the supply chain begins with mineral material in the ground (the ore deposit); extends through a series of processes that include mining, beneficiation, processing (smelting and refining), semimanufacture, and manufacture; and continues through transformation of the mineral ore into concentrates, refined mineral commodities, intermediate forms (such as metals and alloys), component parts, and, finally, complex products. This study analyses the supply chain of tantalum beginning with minerals in the ground to many of the final goods that contain tantalum.

RE-SUPPLY: Securing the supply chains of wind power and solar PV Securing the supply chain for renewable energy. Final Report

Energy Technology Data Exchange (ETDEWEB)

Lehner, Franz; Vuille, Francois; Ziem, Sabine [E4tech UK Ltd, London (United Kingdom); Rastogi, Ankur; Sengupta, Subhabrata [Avalon Consulting, Mumbai (India)

2012-11-15

The RE-SUPPLY project aimed to provide insight into the elements of the supply chains which are presently or can in the future evolve as critical constraints in further large-scale deployment of on- and offshore wind and solar photovoltaic energy. The objectives of the study were twofold: Risk assessment: identify potential bottlenecks in the supply chains of wind and PV and assess their criticality and timeline for occurrence; and, Risk management: identify suitable mitigation strategies and recommend specific actions at policy and industry level.

Prototype tests on the ion source power supplies of the TEXTOR NI-system

International Nuclear Information System (INIS)

Goll, O.; Braunsberger, U.; Schwarz, U.

1987-01-01

The PINI ion source for the TEXTOR neutral injector is fed by a new modular transistorized power supply. All modules are located in a high voltage cage on 55 kV dc against ground. The normal operation of the injectors includes frequent grid breakdowns causing transient high voltage stresses on the ion source power supplies. These stresses must not disturb the safe operation of the power supplies. The paper describes the set up for extensive testing of a supply prototype module under the expected operating conditions. The main features of this test program are reviewed and the measures taken for a safe operation are discussed. As a result of the investigations, recommendations for the installation of the power supplies at the TEXTOR NI system are given

Control of enterprise interfaces for supply chain enterprise modeling

Energy Technology Data Exchange (ETDEWEB)

Interrante, L.D. [Sandia National Labs., Albuquerque, NM (United States); Macfarlane, J.F. [Lawrence Berkeley Lab., CA (United States). Information and Computing Sciences Div.

1995-04-01

There is a current trend for manufacturing enterprises in a supply chain of a particular industry to join forces in an attempt to promote efficiencies and improve competitive position. Such alliances occur in the context of specific legal and business agreements such that each enterprise retains a majority of its business and manufacturing information as private and shares other information with its trading partners. Shared information may include enterprise demand projections, capacities, finished goods inventories, and aggregate production schedules. Evidence of the trend toward information sharing includes the recent emphases on vendor-managed inventories, quick response, and Electronic Data Interchange (EDI) standards. The increased competition brought on by the global marketplace is driving industries to consider the advantages of trading partner agreements. Aggregate-level forecasts, supply-chain production smoothing, and aggregate-level inventory policies can reduce holding costs, record-keeping overhead, and lead time in product development. The goal of this research is to orchestrate information exchange among trading partners to allow for aggregate-level analysis to enhance supply chain efficiency. The notion of Enterprise Interface Control (EIC) is introduced as a means of accomplishing this end.

Perspectives of electricity supply

International Nuclear Information System (INIS)

1988-01-01

The 7 papers read at the symposium discussed the following subjects: Effects of the CO 2 problems of fossil energy systems on the world climate; status and perspectives of the German electricity industry in terms of competitiveness; The European electricity market and the integrated power supply system; Power supply without nuclear power; Costs and rates for households and other customers; Renewable energy sources and their contribution to energy supply in the Federal Republic of Germany; Electricity utilities as service partners. (UA) [de

Smal-Scale Spatial Differences in Supply-Side Ecology of Barnacle Larvae Involves a Complex Suite of Factors (Including Surface Tide, Internal Tides And Surface Winds) in Baja California

Science.gov (United States)

Valencia, A.; Ladah, L. B.

2016-02-01

The objective of this study was to quantify and compare the daily settlement rate of barnacle larvae of Chthamalus spp. at small spatial scales ( 1 km) at three sites with unique geomorphology. Simultaneously, water-column temperature, currents, and coastal winds were measured to detect potential physical transport mechanisms responsible for supply of planktonic larvae to the coast. Autocorrelation artifacts in the environmental and settlement time series were removed with the Autoregressive Integrated Moving Average (ARIMA) and their residuals were used to perform a Principal Component Analysis (PCA). This analysis was carried out to determine the independent modes of variability in the environmental forcing mechanisms that may explain the settlement patterns. We found synchronous settlement pulses occurring throughout the study. Settlement at the wave exposed site was only associated to the wind-forcing mode and not to internal waves, which had not been detected previously and was surprising, considering the strong semidiurnal internal tide at this site. Settlement at both the reef-bounded site and the inside-bay site associated to vertical isotherm displacements, thereby suggesting the importance of internal waves for supply-side ecology at these more southern sites. Our results suggest that a complex suite of factors may interact to result in larval supply at the same site, and that larval supply at nearby sites may be forced by different factors due to differences in geomorphology and/or bathymetry, explaining spatial heterogeneity often detected in larval supply and settlement.

Levels & Barriers to Supply Chain Integration: A conceptual model of Supply Chain Performance

OpenAIRE

RajaIrfan Sabir; Muhammad Irfan

2014-01-01

In modern business scenario Supply chain has become the back bone for every business organization. All supply chain partners are joined together in value delivery network of company that no one can perform better without support of other. The ultimate objective of this cohesive relationship is to deliver value to customers and gets desired state of customer satisfaction & loyalty for the organization. For this purpose it is necessary to integrate the internal and external partners of Supply c...

ASSESSMENT OF GREEN SUPPLY CHAIN MANAGEMENT IN AN INDIAN INDUSTRY

OpenAIRE

Er. Bhura Singh*1, Er. Nikhlesh N. Singh2 & Dr. Prabhat Sinha3

2017-01-01

In the present scenario, there is a growing need for integrating environmentally sound choices into supply chain management research and practices among the organization. The main objective of this study is to assess the recent literatures of the Green Supply Chain management (GSCM) and also determine the environment concern of this emerging field. The study is focused on development of GSCM strategies which also includes that all the researchers from this review is focused on environmental a...

Dealing with large-scale supply lines when introducing new regimens.

Science.gov (United States)

Malati, Christine; Rosenfeld, Joshua; Mowafy, Sherif; Rittmiller, Trevor; Kuritsky, Joel; Crowley, John

2017-07-01

As programs plan the introduction of a new antiretroviral as part of a regimen for HIV treatment, supply chain considerations need to be taken into account. The key to success is balancing the introduction of a new regimen with the phasing out of an old regimen in a manner that does not result in either a shortage or an excess supply of either product while ensuring that patients continue receiving their medications. This necessitates that country programs, donors, and procurement entities possess an appreciation of the global antiretroviral market and understand the dynamics that the manufacturing of new antiretrovirals will have on the transition. Supply, demand, and financial considerations affect the capacity of the supply chain to facilitate a successful antiretroviral transition. Although this commentary draws on United States Agency for International Development experiences under the President's Emergency Plan for AIDS Relief from earlier antiretroviral treatment shifts, the approaches are applicable to other institutions and to future transitions. Three approaches were employed: ensuring the engagement of all key stakeholders in transition planning and execution, including clinicians, advocacy groups, supply chain professionals, ministry, and donors; conducting and updating regularly the national quantification and supply plans for all regimens; and introducing antiretroviral products into programs from regional warehouses based on firm orders. Extensive planning and accounting for supply chain factors is essential to ensuring a smooth transition to a new regimen and to enable the global antiretroviral market to respond adequately.

Water crisis: the metropolitan Atlanta, Georgia, regional water supply conflict

KAUST Repository

Missimer, Thomas M.

2014-07-01

Many large population centres are currently facing considerable difficulties with planning issues to secure future water supplies, as a result of water allocation and environmental issues, litigation, and political dogma. A classic case occurs in the metropolitan Atlanta area, which is a rapidly growing, large population centre that relies solely on surface water for supply. Lake Lanier currently supplies about 70% of the water demand and has been involved in a protracted legal dispute for more than two decades. Drought and environmental management of the reservoir combined to create a water shortage which nearly caused a disaster to the region in 2007 (only about 35 days of water supply was in reserve). While the region has made progress in controlling water demand by implementing a conservation plan, per capita use projections are still very high (at 511 L/day in 2035). Both non-potable reuse and indirect reuse of treated wastewater are contained in the most current water supply plan with up to 380,000 m3/day of wastewater treated using advanced wastewater treatment (nutrient removal) to be discharged into Lake Lanier. The water supply plan, however, includes no additional or new supply sources and has deleted any reference to the use of seawater desalination or other potential water sources which would provide diversification, thereby relying solely on the Coosa and Chattahoochee river reservoirs for the future. © 2014 IWA Publishing.

Modeling Integrated Water-User Decisions with Intermittent Supplies

Science.gov (United States)

Lund, J. R.; Rosenberg, D.

2006-12-01

We present an economic-engineering method to estimate urban water use demands with intermittent water supplies. A two-stage, probabilistic optimization formulation includes a wide variety of water supply enhancement and conservation actions that individual households can adopt to meet multiple water quality uses with uncertain water availability. We embed the optimization in Monte-Carlo simulations to show aggregate effects at a utility (citywide) scale for a population of user conditions and decisions. Parametric analysis provides derivations of supply curves to subsidize conservation, demand responses to alternative pricing, and customer willingness-to-pay to avoid shortages. Results show a good empirical fit for the average and distribution of billed residential water use in Amman, Jordan. Additional outputs give likely market penetration rates for household conservation actions, associated water savings, and subsidies required to entice further adoption. We discuss new insights to size, target, market, and finance conservation programs and interpret a demand curve with block pricing.

Metering apparatus and tariffs for electricity supply

International Nuclear Information System (INIS)

1990-01-01

Conference papers presented cover system economies and tariff structure with papers on pricing of electricity and new metering technologies. Other topics reviewed include metering apparatus design, electronic metering apparatus and solid phase metering technology. Meter data retrieval, bulk supply metering, test equipment and maintenance, and legal requirements and standards are discussed. (author)

Coordinated supply chain dynamic production planning model

Science.gov (United States)

Chandra, Charu; Grabis, Janis

2001-10-01

Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

Supply Chain Visibility with Linked Open Data for Supply Chain Risk Analysis

NARCIS (Netherlands)

Hofman, W.J.

2011-01-01

Current customs applications are declaration based to support the various customs procedures based on (inter)national laws and regulations. To be able to perform a proper supply chain risk analysis, customs requires to have all data in supply chains. The current declaration procedures are not

Supply reliability and dynamic safety analysis of an alternative energy supply chain

DEFF Research Database (Denmark)

Herbert-Hansen, Zaza Nadja Lee; Markert, Frank; Jacobsen, Peter

2016-01-01

This paper focuses on the integration of risk and supply chain modelling by means of analysing a case concerning a Hydrogen Refuelling Station in Berlin. It presents a framework that can analyse an energy supply chain and at the same time enables easy reporting and presentation of various results...... by utilizing Dis-crete Event Simulation (DES). The industrial implication of this work is to provide practitioners with an anal-ysis framework for improved decision support. The novelty of this paper is the approach to model a supply chain together with a dynamically modelled event tree-based approach...

7 CFR 3016.33 - Supplies.

Science.gov (United States)

2010-01-01

... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 7 Agriculture 15 2010-01-01 2010-01-01 false Supplies. 3016.33 Section 3016.33 Agriculture... GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 3016.33 Supplies. (a) Title. Title to...

Defence in depth for electric power supplies in Indian nuclear power plants

International Nuclear Information System (INIS)

Gupta, S.K.; Srivasista, K.; Solanki, R.B.

2009-01-01

The purpose of electric power supply system in a nuclear power plant is to supply and distribute reliable electric power to safety related systems and systems important to safety in various forms, arrangements and combinations of redundancy and diversity in order to perform safety functions required during operational states and design basis events (DBE) such as shutting down the reactor, maintaining the reactor in safe shutdown state, containment isolation and reactor core cooling preventing significant release of radioactive material to the environment. Hence the design basis of electric power supply systems includes identification of DBE that require power supplies, adequacy of redundancy and diversity, environmental conditions to which electric equipment are qualified, identification of loads requiring interrupted and uninterrupted power supplies, time sequence in which emergency loads are to be supplied in case of interruption, provisions for maintaining and testing, consideration for minimum duration capability of emergency power supplies during station blackout etc. Based on operation experience, results of probability safety assessment and certain weaknesses noticed in defence in depth of electric power supply systems, several continuous design improvements have been made in Indian nuclear power plants during operating phase and life extension. Instituting various tests during initial commissioning, subsequent operation and life extension has ensured high standards of performance of electric power supplies. Some of these aspects are highlighted in this paper

Logistics’ diagnostic in cosmetics and toiletries supply chain

Directory of Open Access Journals (Sweden)

Javier Arturo Orjuela-Castro

2016-12-01

Full Text Available The sector of cosmetics and toiletries is a world class sector, consolidated in Colombia with 690 companies of which 420 are in Bogotá D.C. Taking into account that logistics management generates competitive advantage in organizations as factor of success in a global economy, this paper proposes a logistics analysis applied to the case of cosmetics and toiletries supply chain. The results include the diagnosis of logistics processes and resources, which they were studied with an own methodology proposal. The methodology allowed study the logistics factors and variables, elements that recognized the logistical behaviour in the different links of the supply chain.

Petroleum supply monthly, March 1995 with data for January 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-30

Data presented in this report for March 1995, describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

Louisiana physician population trends: will increase in supply meet demand?

Science.gov (United States)

Neumann, Julie A; Sessions, Blane A; Ali, Juzar; Rigby, Perry C

2012-01-01

Physician shortages in the United States are now recognized broadly and widespread by specialty and geography. While supply is increasing, demand inexorably rises. This situation will probably be further stressed post implementation of healthcare reform. The variations by region and by state are many and significant; this complexity is not fully understood nor yet characterized. Trends similar to the averages of the US have been identified in Louisiana, including the aging of physicians. Lack of physicians, both specialists and generalists, has been reported to compromise quality and effectiveness of healthcare. Thus, the importance of matching up supply and demand is evident. The supply of physicians is increasing in absolute number and in the physicians-to-population ratio. Variations in population, aging, geography, and specialties indicate, in some areas, that this may not be enough to deal with the increasing demand. This paper aims to assess historically how physician shortages may affect the balance of supply and demand in future healthcare delivery, particularly in Louisiana.

An interim report on the outlook of long-term energy supply and demand

International Nuclear Information System (INIS)

1982-01-01

An interim report was presented by the supply/demand committee in Over-all Energy Council concerning the energy demand and supply outlook for fiscal 1990 as compared with fiscal 1980. The background for deciding the outlook of energy supply and demand and basic ideas for energy policy, and the outlook for energy supply and demand are outlined. The outlook was prepared, assuming yearly economic growth of about 5 % in 1980s and the utmost efforts by people in energy situation. The energy situation both domestic and abroad is largely changing, including energy saving efforts and petroleum price. The aggregate energy demand for fiscal 1990 was put at about 590 million kl in terms of crude oil. Then, concerning nuclear power generation, the power supply by nuclear energy in fiscal 1990 was estimated at 46 million kw accounting for 11.3 % of the total power supply. (Mori, K.)

City gas supply management system. Toshi gas kyokyu kanri system

Energy Technology Data Exchange (ETDEWEB)

Ota, S [Tokyo Gas Co. Ltd., Tokyo (Japan)

1991-07-05

Supply and control system of city gas (about 90% is LNG) at Tokyo Gas Company is summarized. The LNG is delivered from the high pressure, A-middle pressure and B-middle pressure stations through the low pressure governors at about 3,000 locations to the low-pressure conduit networks. The information system department uses a large-size general purpose IBM computer as a host computer, control computers at each station, and communication networks consisted mainly of the in-house wireless networks. The trunk lines are all looped, and the important facilities are dualized. Characteristic functions include the supply prediction, which takes into account the past supply and ambient temperature records, a day of the week for a particular date, and demand fluctuation trends; adjustments of each holder based on the prediction and restrictions; and piping network simulation to decide gas manufacturing patterns, and determine reasonability of local construction of complicated conduits. The monitoring and control system as the central nerve includes a quick block-wide operation at an accident from earthquake and the like to prevent wide area disasters. 8 figs., 1 tab.

Petroleum supply monthly, June 1999, with data for April 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

Petroleum supply monthly, April 1999, with data for February 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-04-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

Petroleum supply monthly, November 1998, with data for September 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-11-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the Unites States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

Petroleum supply monthly, December 1997 with data from October 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregates, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

Petroleum supply monthly, January 1999 with data for November 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 82 tabs.

Petroleum supply monthly, July 1997 with data from May 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

Petroleum supply monthly, February 1999, with data for December 1998