WorldWideScience

Sample records for supply center columbus

  1. Outsourcing of Defense Supply Center, Columbus, Bus and Taxi Service Operations

    National Research Council Canada - National Science Library

    Granetto, Paul

    1999-01-01

    Introduction. We performed the audit in response to allegations to the Defense Hotline that the Defense Supply Center, Columbus, outsourcing study for bus and taxi service operations was based on incorrect methodology...

  2. Supply Inventory Management: Evaluation of the Defense Supply Center Columbus Qualified Products List and Qualified Manufacturers List Program

    National Research Council Canada - National Science Library

    2002-01-01

    ... was transitioned from the Military Departments. The Defense Supply Center Columbus currently has management responsibility for over 300 Qualified Products Lists and 4 Qualified Manufacturers Lists...

  3. Accounting for Unliquidated Obligations for the Defense Fuel Supply Center

    National Research Council Canada - National Science Library

    1996-01-01

    .... The Defense Finance and Accounting Service (DFAS) Columbus Center, Columbus, Ohio, and the Defense Fuel Supply Center share responsibility for accurate accounting information and financial reporting...

  4. Advanced power supply and distribution systems for Columbus

    Science.gov (United States)

    Eggers, Gert

    1988-01-01

    The paper describes power supply and distribution systems to be used on unmanned/man-tended Columbus elements, capable of supplying 10 kW to 30 kW to a variety of users in low earth orbits (LEO's). For the definition of the Electrical Power System (EPS) challenging requirements as the provision of high power levels under hard LEO conditions, maintainability, commonality etc. are to be taken into account. These requirements are to be seen in conjunction with the Columbus IOC (initial operational capability) scenario stipulating that EPS hardware shall be used on the Polar Platform, the Pressurized Module attached to the U.S. Space Station and the Man-Tended Free Flier. According to the availability of European technologies, the baseline in the power generation area is a photovoltaic system which provides three regulated main buses (150 V d.c.) to the users. In order to maintain power supply during eclipse phases, nickel hydrogen batteries will be used for energy storage purposes with nickel cadmium as back-up solution. The power distribution system needs special attention. Due to the elevated voltage levels mechanical switch gear cannot be used any longer. It is to be replaced by solid state power controllers (SSPC). Because these devices show a totally different behaviour with regard to conventional relay contacts, new approaches in the area of switching and protection are necessary. In view of the crucial role of this new technology for the realization of medium voltage d.c. systems, it is of great importance for Columbus and, hence will receive adequate consideration in the paper. In order to cater for effective management and control of the power supply and distribution hardware, a so called power system internal data processing assembly (PINDAP) has been introduced in the EPS. PINDAP is the key to reduced dependence on ground stations (alleviated ground support requirements); it keeps crew involvement in the EPS control process to as minimum and provides

  5. Payroll Expenses Reported by the Defense Finance and Accounting Service Columbus Center

    National Research Council Canada - National Science Library

    1998-01-01

    .... Specifically, we reviewed accounting records for payroll and related expenditures to determine the validity of payroll expenses that the DFAS Columbus Center submitted to the DFAS Indianapolis Center...

  6. The Columbus Myth: Power and Ideology in Picturebooks about Christopher Columbus

    Science.gov (United States)

    Desai, Christina M.

    2013-01-01

    In 1992, the 500th anniversary of Columbus's landing in the Bahamas was simultaneously celebrated and denounced in the US. Damaging facts about Columbus and the impact of his voyages were aired along with demands for truth and change. This study analyzes the power relationships and political ideology of picturebooks about Columbus published…

  7. The Columbus-CC—Operating the European laboratory at ISS

    Science.gov (United States)

    Kuch, T.; Sabath, D.

    2008-07-01

    The European ISS Columbus Control Center (Col-CC) joined the club of ISS mission control centers in Moscow, Houston and Huntsville. It took some time to reach that goal. In 1998 the European Space Agency (ESA) awarded the German Aerospace Center DLR to design, develop and implement the Col-CC at its premises in Oberpfaffenhofen, near Munich, Germany. In 2002 a core mission operations team was built up. An integrated team of ESA, industry and control center started to define processes and implemented first operations products and tools. This was accompanied by regular meetings with the international partners in the US and Russia. With intensive training and numerous simulations the team was able to gain experience and is now eagerly waiting for the launch of Columbus. However, thanks to the involvement in some operational activities the Col-CC staff has already been able to gain operational ISS experience. After the inauguration in October 2004 Col-CC supported the Eneide mission in April 2005 when the Italian ESA-Astronaut Roberto Vittori flew onboard a Soyuz to the ISS where he spent 10 days. Another very important milestone was the operations support for ESA's Astrolab mission. The Astrolab mission was of major importance for Europe and particularly for Germany because it implied the first long duration flight of ESA astronaut Thomas Reiter, an astronaut of German nationality. The tasks of Col-CC are described and also the experiences made with the first operational long-term mission which took place from July to December 2006. Meanwhile the Col-CC was able to reach the operational readiness status for the Columbus mission which is set for a launch date later in 2007. Despite the concentration on the challenging Columbus Assembly and Checkout phase emphasis is already laid on the following increments for the European ISS operations. Early 2006 ESA transferred the operational tasks and responsibilities to the hands of the industrial operator. This approach creates

  8. 77 FR 62135 - Columbus Day, 2012

    Science.gov (United States)

    2012-10-12

    ... Columbus Day, 2012 By the President of the United States of America A Proclamation As dawn broke over the... spirit that carried Christopher Columbus and his crew from a Spanish port to North America, and we... Americans have summoned the same spirit of discovery that drove Christopher Columbus when he cast off from...

  9. Military Construction of the Defense Finance and Accounting Service Operations Facility, Columbus, Ohio

    National Research Council Canada - National Science Library

    Granetto, Paul

    1995-01-01

    The audit objectives were to determine whether the Defense Finance and Accounting Service Columbus Center properly planned and programmed the FY 1996 proposed military construction project and whether...

  10. Columbus State University Global Observation and Outreach for the 2012 Transit of Venus

    Science.gov (United States)

    Perry, Matthew; McCarty, C.; Bartow, M.; Hood, J. C.; Lodder, K.; Johnson, M.; Cruzen, S. T.; Williams, R. N.

    2013-01-01

    Faculty, staff and students from Columbus State University’s (CSU’s) Coca-Cola Space Science Center presented a webcast of the 2012 Transit of Venus from three continents to a global audience of 1.4 million unique viewers. Team members imaged the transit with telescopes using white-light, hydrogen-alpha, and calcium filters, from Alice Springs, Australia; the Gobi Desert, Mongolia; Bryce Canyon, UT; and Columbus, GA. Images were webcast live during the transit in partnership with NASA’s Sun-Earth Day program, and Science Center staff members were featured on NASA TV. Local members of the public were brought in for a series of outreach initiatives, in both Georgia and Australia, before and during the transit. The data recorded from the various locations have been archived for use in demonstrating principles such as the historical measurement of the astronomical unit.

  11. Host plants, distribution, and ecological association of Hoplolaimus columbus.

    Science.gov (United States)

    Lewis, S A; Smith, F H

    1976-07-01

    Selected species and cultivars of plants were evaluated for host suitability for Hoplolaimus columbus under greenhouse and fieht conditions. Sixteen agronomic plant cultivars were assayed for infection and reproduction after 2-6 months. Lima bean, soybean, cotton, and sweet corn were most favorable for nematode reproduction, whereas sweet potato was a nonhost plant. Field corn and watermelon, which tolerated H. columbus without significant yield losses, are suited for alternative crops in the southern coastal plain. Populations of H. columbus occurred in 15% of soyhean and 25% of cotton soil samples assayed. Population levels of H. columbus and Helicotylenchus spp. were correlated with fluctuations in various soil nutrient factors, whereas Meloidogyne spp. and Scutellonema spp. were not. No correlation was detected between the presence of H. columbus and populations of other nematode genera stndied.

  12. Columbus and the Flat Earth Myth

    Science.gov (United States)

    Singham, Mano

    2007-01-01

    In this article, the author discusses the resilient myth that it was Columbus' journey to the New World that proved that the world was round. It is widely known that it was Columbus' journey to the New World that proved that the world was round. However, Thomas Kuhn in "The Copernican Revolution" showed clearly in 1957 that the idea of a flat…

  13. 41 CFR 101-28.303 - Benefits provided by customer supply centers.

    Science.gov (United States)

    2010-07-01

    ... customer supply centers. 101-28.303 Section 101-28.303 Public Contracts and Property Management Federal...-STORAGE AND DISTRIBUTION 28.3-Customer Supply Centers § 101-28.303 Benefits provided by customer supply centers. The customer supply centers (CSCs) provide the following: (a) Overall savings to the Federal...

  14. 41 CFR 101-28.302 - Mission of customer supply centers.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Mission of customer... DISTRIBUTION 28.3-Customer Supply Centers § 101-28.302 Mission of customer supply centers. Customer supply... of frequently needed common-use expendable items for the accomplishment of customer agency missions. ...

  15. Columbus safety and reliability

    Science.gov (United States)

    Longhurst, F.; Wessels, H.

    1988-10-01

    Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

  16. Candidate functions for advanced technology implementation in the Columbus mission planning environment

    Science.gov (United States)

    Loomis, Audrey; Kellner, Albrecht

    1988-01-01

    The Columbus Project is the European Space Agency's contribution to the International Space Station program. Columbus is planned to consist of three elements (a laboratory module attached to the Space Station base, a man-tended freeflyer orbiting with the Space Station base, and a platform in polar orbit). System definition and requirements analysis for Columbus are underway, scheduled for completion in mid-1990. An overview of the Columbus mission planning environment and operations concept as currently defined is given, and some of the challenges presented to software maintainers and ground segment personnel during mission operators are identified. The use of advanced technologies in system implementation is being explored. Both advantages of such solutions and potential problems they present are discussed, and the next steps to be taken by Columbus before targeting any functions for advanced technology implementation are summarized. Several functions in the mission planning process were identified as candidates for advanced technology implementation. These range from expert interaction with Columbus' data bases through activity scheduling and near-real-time response to departures from the planned timeline. Each function is described, and its potential for advanced technology implementation briefly assessed.

  17. Astronaut training in view of the future: A Columbus payload instructor perspective

    Science.gov (United States)

    Aguzzi, Manuela; Bosca, Riccardo; Müllerschkowski, Uwe

    2010-02-01

    In early 2008 the Columbus module was successfully attached to the ISS. Columbus is the main European contribution to the on-board scientific activity, and is the result of the interdisciplinary effort of European professionals involved from the concept to the utilisation of the laboratory. Astronauts from different Space Agencies have been trained to operate the scientific payloads aboard Columbus, in order to return fundamental data to the scientific community. The aim of this paper is to describe the current activity of the Columbus Payload Training Team (as part of the European Astronaut Centre of ESA) and from this experience derive lessons learned for the future training development, in view of long-term missions. The general structure of the training is described. The Columbus Payload Training Team activity is outlined and the process of the lesson development (Instructional System Design) is briefly described. Finally the features of the training process that can become critical in future scenario are highlighted.

  18. 41 CFR 101-28.306-2 - Use of customer supply centers.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Use of customer supply... DISTRIBUTION 28.3-Customer Supply Centers § 101-28.306-2 Use of customer supply centers. (a) Orders are... requirements. All use of the CSC is based upon the customer access code assigned at the time of establishment...

  19. Inelastic analysis of Battelle-Columbus piping elbow creep test

    International Nuclear Information System (INIS)

    Dhalla, A.K.; Newman, S.Z.

    1979-01-01

    Analytical results are presented for room temperature and 593 deg. C creep bending deformation of a piping elbow structure tested at the Battelle-Columbus Laboratory. This analysis was performed in support of the International Piping Benchmark Problem Program being coordinated by ORNL. Results are presented for both simplified and refined structural models, and compared with test measurements reported by the Battelle-Columbus Laboratory. (author)

  20. 76 FR 1521 - Security Zone: Fleet Industrial Supply Center Pier, San Diego, CA

    Science.gov (United States)

    2011-01-11

    ...-AA87 Security Zone: Fleet Industrial Supply Center Pier, San Diego, CA AGENCY: Coast Guard, DHS. ACTION... Diego, CA. The existing security zone is around the former Fleet Industrial Supply Center Pier. The security zone encompasses all navigable waters within 100 feet of the former Fleet Industrial Supply Center...

  1. U.S. Army Engineering and Support Center, Huntsville, Price Reasonableness Determinations for Federal Supply Schedule Orders for Supplies Need Improvement

    Science.gov (United States)

    2016-03-29

    Army Engineering and Support Center, Huntsville, Price Reasonableness Determinations for Federal Supply Schedule Orders for Supplies Need...0207.000) │ i Results in Brief U.S. Army Engineering and Support Center, Huntsville, Price Reasonableness Determinations for Federal Supply Schedule...officers made determinations of fair and reasonable pricing for General Services Administration Federal supply schedule orders awarded for purchases

  2. Updates on HRF Payloads Operations in Columbus ATCS

    Science.gov (United States)

    DePalo, Savino; Wright, Bruce D.; La,e Robert E.; Challis, Simon; Davenport, Robert; Pietrafesa, Donata

    2011-01-01

    The NASA developed Human Research Facility 1 (HRF1) and Human Research Facility (HRF2) experiment racks have been operating in the European Space Agency (ESA) Columbus module of the International Space Station (ISS) since Summer 2008. The two racks are of the same design. Since the start of operations, unexpected pressure spikes were observed in the Columbus module's thermal-hydraulic system during the racks activation sequence. The root cause of these spikes was identified in the activation command sequence in the Rack Interface Controller (RIC), which controls the flow of thermal-hydraulic system fluid through the rack. A new Common RIC Software (CRS) release fixed the bug and was uploaded on both racks in late 2009. This paper gives a short introduction to the topic, describes the Columbus module countermeasures to mitigate the spikes, describes the ground validation test of the new software, and describes the flight checks performed before and after the final upload. Finally, the new on-orbit test designed to further simplify the racks hydraulic management is presented.

  3. 3 CFR 8437 - Proclamation 8437 of October 9, 2009. Columbus Day, 2009

    Science.gov (United States)

    2010-01-01

    ... 3 The President 1 2010-01-01 2010-01-01 false Proclamation 8437 of October 9, 2009. Columbus Day... Proc. 8437 Columbus Day, 2009By the President of the United States of America A Proclamation More than... Mexico, explorers of Italian descent have directly influenced the growth of North America. Their...

  4. COLUMBUS as Engineering Testbed for Communications and Multimedia Equipment

    Science.gov (United States)

    Bank, C.; Anspach von Broecker, G. O.; Kolloge, H.-G.; Richters, M.; Rauer, D.; Urban, G.; Canovai, G.; Oesterle, E.

    2002-01-01

    The paper presents ongoing activities to prepare COLUMBUS for communications and multimedia technology experiments. For this purpose, Astrium SI, Bremen, has studied several options how to best combine the given system architecture with flexible and state-of-the-art interface avionics and software. These activities have been conducted in coordination with, and partially under contract of, DLR and ESA/ESTEC. Moreover, Astrium SI has realized three testbeds for multimedia software and hardware testing under own funding. The experimental core avionics unit - about a half double rack - establishes the core of a new multi-user experiment facility for this type of investigation onboard COLUMBUS, which shall be available to all users of COLUMBUS. It allows for the connection of 2nd generation payload, that is payload requiring broadband data transfer and near-real-time access by the Principal Investigator on ground, to test highly interactive and near-realtime payload operation. The facility is also foreseen to test new equipment to provide the astronauts onboard the ISS/COLUMBUS with bi- directional hi-fi voice and video connectivity to ground, private voice coms and e-mail, and a multimedia workstation for ops training and recreation. Connection to an appropriate Wide Area Network (WAN) on Earth is possible. The facility will include a broadband data transmission front-end terminal, which is mounted externally on the COLUMBUS module. This Equipment provides high flexibility due to the complete transparent transmit and receive chains, the steerable multi-frequency antenna system and its own thermal and power control and distribution. The Equipment is monitored and controlled via the COLUMBUS internal facility. It combines several new hardware items, which are newly developed for the next generation of broadband communication satellites and operates in Ka -Band with the experimental ESA data relay satellite ARTEMIS. The equipment is also TDRSS compatible; the open loop

  5. MEAT-GOAT MARKET ANALYSIS: A PILOT STUDY OF THE SOMALI MARKET IN COLUMBUS, OH

    OpenAIRE

    Worley, C. Thomas; Ellerman, John; Mangione, Dave; West, Travis; Yang, Y.

    2004-01-01

    This case study focuses on meat goat marketing involving one distinct immigrant group residing in one area of Columbus, Ohio: the Somalis. There are about 20,000-25,000 Somalis living in Columbus, the second largest concentration of Somalian immigrants in the U.S. after Minneapolis-St. Paul, Minnesota. It is estimated that Columbus Somalis consume the meat from about 14,000 goats each year. The objective of this pilot study is to analyze the meat goat marketing and consumption patterns of the...

  6. Automation and robotics for COLUMBUS: An implementation concept for the free flying laboratory (MTFF)

    Science.gov (United States)

    Goelz, G.; Sommer, B.

    1992-01-01

    With nearly forty percent of the funding, Germany is the main contributor to the European COLUMBUS Programme, followed by Italy, France and further ESA member states. The COLUMBUS elements are the Attached Laboratory (APM) to be permanently attached to the Space Station FREEDOM, the polar platform (PPF) and the Man Tended Free Flyer (MTFF). The latter element is regarded to be of special interest for the German micro-g community. Until now the implementation of A&R Technologies has not been included as part of the system concept for the COLUMBUS laboratory modules. Yet especially for the Free Flyer, a high degree of A&R will be indispensible. An A&R system concept and implementation options for A&R are given to make the COLUMBUS labs 'intelligent' laboratories in orbit.

  7. Goodby Columbus and all that: history and textual criticism

    Directory of Open Access Journals (Sweden)

    Teofilo F. Ruiz

    1993-07-01

    Full Text Available [First paragraph] Columbus. FELIPE FERNANDEZ-ARMESTO. Oxford: Oxford University Press, 1991. xxvii + 218 pp. (Cloth US$ 16.95, Paper US$ 6.99 The Worlds of Christopher Columbus. WILLIAM D. PHILLIPS, JR. & CARLA RAHN PHILLIPS. Cambridge: Cambridge University Press, 1992. xii + 322 pp. (Cloth US$ 27.95 In Search of Columbus: The Sources for the First Voyage. DAVID HENIGE. Tucson: University of Arizona Press, 1991. xiii + 359 pp. (Cloth US$ 29.95 Columbus and the Golden World of the Island Arawaks: The Story of the First Americans and Their Caribbean Environment. D.J.R. WALKER. Kingston, Jamaica: Ian Randle, 1992. 320 pp. (Cloth US$ 12.95 By the time this review appears in print, the Quincentenary celebrations and/or deprecations of the event will be slowly fading into most welcomed oblivion. There will be, of course, the unavoidable local commemorations of specific events: the discovery of such and such island, the anniversary of some European misdeed, the struggle for the valley of Mexico; but the collective remembrance of the Encounter/Discovery will have been allowed to run its course. In truth, after a veritable flood of publications, seminars, operas, protests, and ghastly movies, one is not too sorry to see the whole affair put safely away for another century. If there is any consolation to this continuous process of recovered memories and history, it is that a good number of sensible and scholarly works have been published - including some of those reviewed here - which demolish the idealization and glorification of the Atlantic enterprise and set the history of the Encounter/Discovery within a proper historical context.

  8. 33 CFR 165.1121 - Security Zone: Fleet Supply Center Industrial Pier, San Diego, CA.

    Science.gov (United States)

    2010-07-01

    ... Guard District § 165.1121 Security Zone: Fleet Supply Center Industrial Pier, San Diego, CA. (a... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone: Fleet Supply Center Industrial Pier, San Diego, CA. 165.1121 Section 165.1121 Navigation and Navigable Waters COAST...

  9. Efficacy of Cotton Root Destruction and Winter Cover Crops for Suppression of Hoplolaimus columbus.

    Science.gov (United States)

    Davis, R F; Baird, R E; McNeil, R D

    2000-12-01

    The efficacy of rye (Secale cereale) and wheat (Triticum aestivum) winter cover crops and cotton stalk and root destruction (i.e., pulling them up) were evaluated in field tests during two growing seasons for Hoplolaimus columbus management in cotton. The effect of removing debris from the field following root destruction also was evaluated. Wheat and rye produced similar amounts of biomass, and both crops produced more biomass (P Cover crops did not suppress H. columbus population levels or increase subsequent cotton yields. Cotton root destruction did not affect cotton stand or plant height the following year. Cotton root destruction lowered (P rye or wheat cover crop or cotton root destruction following harvest is ineffective for H. columbus management in cotton.

  10. Columbus electronic freight management evaluation final report : June 2008.

    Science.gov (United States)

    2008-06-01

    This document provides the independent evaluation of the USDOT-sponsored Columbus Electronic Freight Management (CEFM) Operational Test, which occurred from late May 2007 until December 2007. The Evaluation report includes descriptions of the CEFM sy...

  11. Analysis and protective measures of sharp instrument injury causes of sterilization and supply center

    Directory of Open Access Journals (Sweden)

    Hua YANG

    2014-11-01

    Full Text Available Objective: To analyze the causes of sharp injury in the sterilization and supply center, take protective measures, effectively avoid sharp instrument injury, and guarantee staff safety. Methods: Adopt a retrospective survey method, summarize sharp instrument injury data of sterilization and supply center in 2013, analyze the reasons of the occurrence of sharp instrument injury, and make protective countermeasures. Results: Sharp instrument injuries occurred mainly in the device classification, manual cleaning and device packaging process. Conclusion: Poor consciousness of occupational protection of the staff in the sterilization and supply center, nonstandard operation, and lack of training and supervision in place are the main reasons of occurrence of sharp instrument injury.

  12. The performance and subjective responses of call-center operators with new and used supply air filters at two outdoor air supply rates

    DEFF Research Database (Denmark)

    Wargocki, Pawel; Wyon, David; Fanger, Povl Ole

    2004-01-01

    A 2X2 replicated field intervention experiment was conducted in a call-center providing a telephone directory service: outdoor air supply rate was adjusted to be 8% of the total airflow of 430 l/s (3.5/h)and the supply air filters were either new or had been in place for 6 months. One of these in......A 2X2 replicated field intervention experiment was conducted in a call-center providing a telephone directory service: outdoor air supply rate was adjusted to be 8% of the total airflow of 430 l/s (3.5/h)and the supply air filters were either new or had been in place for 6 months. One...

  13. Toward a permanent lunar settlement in the coming decade: the Columbus Project

    Energy Technology Data Exchange (ETDEWEB)

    Hyde, R.A.; Ishikawa, M.Y.; Wood, L.L.

    1985-11-19

    The motivation for creating a permanent lunar settlement is sketched, and reasons for doing so in the coming decade are put forward. A basic plan to accomplish this is outlined, along technical and programmatic axes. It is concluded that founding a lunar settlement on the five hundredth anniversary of the Columbus landing - a Columbus Project - could be executed as a volunteer-intensive American enterprise requiring roughly six thousand man-years of skilled endeavor and a total Governmental contribution of the order of a half-billion dollars. 8 figs.

  14. Toward a permanent lunar settlement in the coming decade: the Columbus Project

    International Nuclear Information System (INIS)

    Hyde, R.A.; Ishikawa, M.Y.; Wood, L.L.

    1985-01-01

    The motivation for creating a permanent lunar settlement is sketched, and reasons for doing so in the coming decade are put forward. A basic plan to accomplish this is outlined, along technical and programmatic axes. It is concluded that founding a lunar settlement on the five hundredth anniversary of the Columbus landing - a Columbus Project - could be executed as a volunteer-intensive American enterprise requiring roughly six thousand man-years of skilled endeavor and a total Governmental contribution of the order of a half-billion dollars. 8 figs

  15. Cursory radiological assessment: Battelle Columbus Laboratory Decommissioning and Decontamination Project

    International Nuclear Information System (INIS)

    Smith, W.H.; Munyon, W.J.; Mosho, G.D.; Robinet, M.J.; Wynveen, R.A.

    1988-10-01

    This document reports on the results obtained from a cursory radiological assessment of various properties at the Battelle Columbus Laboratory, Columbia, Ohio. The cursory radiological assessment is part of a preliminary investigation for the Battelle Columbus Laboratory Decommissioning and Decontamination Project. The radiological assessment of Battelle Columbus Laboratory's two sites included conducting interior and exterior building surveys and collecting and analyzing air, sewer system, and soil samples. Direct radiological surveys were made of floor, wall, and overhead areas. Smear surveys were made on various interior building surfaces as well as the exterior building vents. Air samples were collected in select areas to determine concentrations of Rn-222, Rn-220, and Rn-219 daughters, in addition to any long-lived radioactive particulates. Radon-222 concentrations were continuously monitored over a 24-hr period at several building locations using a radon gas monitoring system. The sanitary sewer systems at King Avenue, West Jefferson-North, and West Jefferson-South were each sampled at select locations. All samples were submitted to the Argonne Analytical Chemistry Laboratory for various radiological and chemical analyses. Environmental soil corings were taken at both the King Avenue and West Jefferson sites to investigate the potential for soil contamination within the first 12-inches below grade. Further subsurface investigations at the West Jefferson-North and West Jefferson-South areas were conducted using soil boring techniques. 4 refs., 10 figs., 10 tabs

  16. Decontamination of Battelle-Columbus' Plutonium Facility. Final report

    International Nuclear Information System (INIS)

    Rudolph, A.; Kirsch, G.; Toy, H.L.

    1984-01-01

    The Plutonium Laboratory, owned and operated by Battelle Memorial Institute's Columbus Division, was located in Battelle's Nuclear Sciences area near West Jefferson, Ohio, approximately 17 miles west of Columbus, Ohio. Originally built in 1960 for plutonium research and processing, the Plutonium Laboratory was enlarged in 1964 and again in 1967. With the termination of the Advanced Fuel Program in March, 1977, the decision was made to decommission the Plutonium Laboratory and to decontaminate the building for unrestricted use. Decontamination procedures began in January, 1978. All items which had come into contact with radioactivity from the plutonium operations were cleaned or disposed of through prescribed channels, maintaining procedures to ensure that D and D operations would pose no risk to the public, the environment, or the workers. The entire program was conducted under the cognizance of DOE's Chicago Operations Office. The building which housed the Plutonium Laboratory has now been decontaminated to levels allowing it to house ordinary laboratory and office operations. A ''Finding of No Significant Impact'' (FNSI) was issued in May, 1980

  17. Supply chain optimization at an academic medical center.

    Science.gov (United States)

    Labuhn, Jonathan; Almeter, Philip; McLaughlin, Christopher; Fields, Philip; Turner, Benjamin

    2017-08-01

    A successful supply chain optimization project that leveraged technology, engineering principles, and a technician workflow redesign in the setting of a growing health system is described. With continued rises in medication costs, medication inventory management is increasingly important. Proper management of central pharmacy inventory and floor-stock inventory in automated dispensing cabinets (ADCs) can be challenging. In an effort to improve control of inventory costs in the central pharmacy of a large academic medical center, the pharmacy department implemented a supply chain optimization project in collaboration with the medical center's inhouse team of experts on process improvement and industrial engineering. The project had 2 main components: (1) upgrading and reconfiguring carousel technology within an expanded central pharmacy footprint to generate accurate floor-stock inventory replenishment reports, which resulted in efficiencies within the medication-use system, and (2) implementing a technician workflow redesign and algorithm to right-size the ADC inventory, which decreased inventory stockouts (i.e., incidents of depletion of medication stock) and improved ADC user satisfaction. Through a multifaceted approach to inventory management, the number of stockouts per month was decreased and ADC inventory was optimized, resulting in a one-time inventory cost savings of $220,500. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  18. 2009 Defense Supply Center Columbus Land and Maritime Supply Chains Business Conference and Exhibition

    Science.gov (United States)

    2009-08-19

    DSN: 388-7453 CSCASSIG@CSD.DISA.MIL  DFAS eCommerce web site http://www.dfas.mil/contractorpay/electroniccommerce.html  DFAS Customer Service...M-ATV is a separate category within the MRAP family of vehicles. ►Mission: Small-unit combat operations in highly restricted rural , mountainous...vehicles. ►Mission: Small-unit combat operations in highly restricted rural , mountainous and urban environments. ► Troop Transport: Carry up to five

  19. 2009 Defense Supply Center Columbus Land and Maritime Supply Chains: Business Conference and Exhibition

    Science.gov (United States)

    2009-08-19

    DSN: 388-7453 CSCASSIG@CSD.DISA.MIL  DFAS eCommerce web site http://www.dfas.mil/contractorpay/electroniccommerce.html  DFAS Customer Service...M-ATV is a separate category within the MRAP family of vehicles. ►Mission: Small-unit combat operations in highly restricted rural , mountainous...vehicles. ►Mission: Small-unit combat operations in highly restricted rural , mountainous and urban environments. ► Troop Transport: Carry up to five

  20. The Columbus Knee System: 4-Year Results of a New Deep Flexion Design Compared to the NexGen Full Flex Implant

    Directory of Open Access Journals (Sweden)

    D. Goebel

    2012-01-01

    Full Text Available The Columbus knee system is designed as a standard knee implant to allow high flexion without additional bone resection. Between August, 2004 and March, 2010 we performed 109 total knee arthroplasties of the Columbus knee system in 101 consecutive patients suffering from primary arthrosis of the knee. Mean age was 72.4 years in women and 70.3 years in men. Mean followup was 47.3 months. The 4-year results of a group of patients who received the NexGen Full Flex implant operated by the same surgeon were used for comparison. Mean total knee score was Columbus: 175.6 and NexGen Flex: 183.4; =0.037. Mean operation time was 53 min for Columbus and 66 min for NexGen Flex; 0.05. Radiological assessment showed no signs of loosening for both groups. Therefore, the Columbus knee system can be recommended for flexion angles up to 140∘.

  1. Features of internal water supply and water disposal of shopping centers

    Directory of Open Access Journals (Sweden)

    Orlov Evgeniy Vladimirovich

    2014-01-01

    Full Text Available Pipeline from an external system should be inlet in the part of the building where a large number of water folding devices will be concentrated. As a rule, for shopping centers with a lot of water consumers it is necessary to make not less than three inputs, each of them should be connected to different areas of an external ring water supply system in order to make the work of the system more reliable.The places for water folding fittings in shopping centers are the following. The water folding devices: mixers are placed in sanitary cabins of shopping centers. Usually, for for water saving in buildings with a big pass-through capacity per hour it is reasonable to use contactless mixers, which are turned on upon raising a hand with a help of motion sensor or light sensor. Another important argument in favor of such mixers is prevention of infections spread for the reason that the consumer doesn't touch the device, so, the risk of bacteria transmission via the device decreases. Such mixer supplies water with a demanded expense and temperature. As a rule, water for such mixers moves from the centralized internal water supply system of hot water, mixing up with cold water. If there is no centralized hot water supply system, it is possible to use hot water storage heaters in case of a small number of visitors or to reject mixers at all in favor of the cranes giving water of only one temperature (cold, which is also practiced.For the branch of economic and household the water receivers are used, which are present in sanitary cabins in most cases by toilet bowls, wash basins, urinals.

  2. Flood-inundation maps for the East Fork White River at Columbus, Indiana

    Science.gov (United States)

    Lombard, Pamela J.

    2013-01-01

    Digital flood-inundation maps for a 5.4-mile reach of the East Fork White River at Columbus, Indiana, from where the Flatrock and Driftwood Rivers combine to make up East Fork White River to just upstream of the confluence of Clifty Creek with the East Fork White River, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation, depict estimates of the areal extent of flooding corresponding to selected water levels (stages) at USGS streamgage 03364000, East Fork White River at Columbus, Indiana. Current conditions at the USGS streamgage may be obtained on the Internet from the USGS National Water Information System (http://waterdata.usgs.gov/in/nwis/uv/?site_no=03364000&agency_cd=USGS&). The National Weather Service (NWS) forecasts flood hydrographs for the East Fork White River at Columbus, Indiana at their Advanced Hydrologic Prediction Service (AHPS) flood warning system Website (http://water.weather.gov/ahps/), that may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relation at USGS streamgage 03364000, East Fork White River at Columbus, Indiana. The calibrated hydraulic model was then used to determine 15 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from Light Detection and Ranging (LiDAR) data), having a 0.37-ft vertical accuracy and a 1.02 ft

  3. NASA Ames Research Center 60 MW Power Supply Modernization

    Science.gov (United States)

    Choy, Yuen Ching; Ilinets, Boris V.; Miller, Ted; Nagel, Kirsten (Technical Monitor)

    2001-01-01

    The NASA Ames Research Center 60 MW DC Power Supply was built in 1974 to provide controlled DC power for the Thermophysics Facility Arc Jet Laboratory. The Power Supply has gradually losing reliability due to outdated technology and component life limitation. NASA has decided to upgrade the existing rectifier modules with contemporary high-power electronics and control equipment. NASA plans to complete this project in 2001. This project includes a complete replacement of obsolete thyristor stacks in all six rectifier modules and rectifier bridge control system. High power water-cooled thyristors and freewheeling diodes will be used. The rating of each of the six modules will be 4000 A at 5500 V. The control firing angle signal will be sent from the Facility Control System to six modules via fiberoptic cable. The Power Supply control and monitoring system will include a Master PLC in the Facility building and a Slave PLC in each rectifier module. This system will also monitor each thyristor level in each stack and the auxiliary equipment.

  4. Downlight Demonstration Program: Hilton Columbus Downtown

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Robert G.; Perrin, Tess E.

    2014-05-13

    The U.S. Department of Energy (DOE) estimates that there were about 700 million downlight luminaires installed in residential and commercial buildings in the U.S. as of 2012, with light-emitting diode (LED) luminaires representing less than 1% of this installed base. Downlight luminaires using conventional incandescent, halogen, and compact fluorescent lamps have lower efficacies and shorter expected lifetimes than comparable LED systems, but the lower initial cost of the conventional technology and the uncertainties associated with the newer LED technology have restricted widespread adoption of LED downlight luminaires. About 278 tBtu of energy could be saved annually if LED luminaires were to saturate the downlight market, equating to an annual energy cost savings of $2.6 billion. This report summarizes an evaluation of LED recessed downlight luminaires in the guest rooms at the Hilton Columbus Downtown hotel in Columbus, OH. The facility opened in October of 2012, and the U.S. Department of Energy (DOE) conducted a post-occupancy assessment of the facility in January–March of 2014. Each of the 484 guest rooms uses seven 15 W LED downlights: four downlights in the entry and bedroom and three downlights in the bathroom. The 48 suites use the seven 15 W LED downlights and additional fixtures depending on the space requirements, so that in total the facility has more than 3,700 LED downlights. The downlights are controlled through wall-mounted switches and dimmers. A ceiling-mounted vacancy sensor ensures that the bathroom luminaires are turned off when the room is not occupied.

  5. An Innovative Virtual Training Simulator for Columbus Astronauts

    Science.gov (United States)

    Risola, F.; Morzuch, G.

    2004-06-01

    The International Space Station (ISS) is a co-operative programme among the main world space agencies. The European Space Agency contribution is the Automated Transfer Vehicle and the Columbus Orbital Facility, which is the European laboratory of the ISS. It provides a pressurized environment to house up to ten payload racks containing scientific instruments for the conduct of a broad band of experiments. The astronauts on-board of the ISS interact with the payloads for the preparation and execution of the experiments and before their expedition, they have to train on ground in the most realistic manner. The training is carried out at the European Astronauts Centre in the Columbus Trainer, a complex facility that reproduces the physical layout of the ISS European laboratory and a set of payload racks simulators. These simulators are being developed by Dataspazio with an innovative low-cost approach combining the high realism of the simulation with the flexibility and re-usability of the payloads simulators. The hearth of this approach is the interactive payload Virtual Front-panel Interface. The development of these high-realism training payload simulators incorporate several technological issues such as Digital Light ProcessingTM, projected capacitance touch-screen, high-fidelity graphics and simulation software.

  6. Cosmic radiation shielding properties of COLUMBUS and REMSIM multi-layer external shells

    Science.gov (United States)

    Durante, Marco; Manti, Lorenzo; Rusek, Adam; Belluco, Maurizio; Lobascio, Cesare

    The European module COLUMBUS has been recently installed on the International Space Station. Future plans for exploration involve the use of inflatable modules, such as the REMSIM concept proposed in a previous ESA funded study. We studied the radiation shielding properties of COLUMBUS and REMSIM external shell using 1 GeV/n Feor H-ions accelerated at the NASA Space Radiation Laboratory at the Brookhaven National Laboratory (Long Island, NY, USA). COLUMBUS has a 22 mm rigid multi-layer shell with Al, Nextel and Kevlar, as materials of the double bumper for meteoroids and debris protection, MLI for thermal reasons and again Al as pressure shell. Inside the module, astronauts are further protected by secondary structures, including racks, a number of electronic devices and payload equipment. This internal equipment has been simulated using Al and Kevlar, bringing the total thickness to about 15 g/cm2. REMSIM consists of a thermal multi-layer (MLI), four Nextel layers used to provide shock of the impacting micro-meteoroids, a ballistic restraint multi-layer of Kevlar used to absorb debris cloud's kinetic energy, a Kevlar structural restraint to support pressure loads incurred from inflating the module. To contain air inside the module, REMSIM adopts three layers of airtight material separated by two layers of Kevlar (air bladder). A final layer of Nomex provide protection against punctures and fire. In the flight configuration there are also spacer elements (foam) needed to guarantee correct spacing between consecutive bumper layers. These spacers were not included in the tests, making the total thickness about 1.1 cm. The internal equipment in REMSIM was not been defined, but due to its application for exploration missions it was decided to exploit water, valuable resource used for drinking, washing and technical usage, as a radiation shielding. In this test, we have included about 8 cm of water. Measured dose attenuation shows that the Columbus module reduces the

  7. Promoting active transportation as a partnership between urban planning and public health: the columbus healthy places program.

    Science.gov (United States)

    Green, Christine Godward; Klein, Elizabeth G

    2011-01-01

    Active transportation has been considered as one method to address the American obesity epidemic. To address obesity prevention through built-environment change, the local public health department in Columbus, Ohio, established the Columbus Healthy Places (CHP) program to formally promote active transportation in numerous aspects of community design for the city. In this article, we present a case study of the CHP program and discuss the review of city development rezoning applications as a successful strategy to link public health to urban planning. Prior to the CHP review, 7% of development applications in Columbus included active transportation components; in 2009, 64% of development applications adopted active transportation components specifically recommended by the CHP review. Active transportation recommendations generally included adding bike racks, widening or adding sidewalks, and providing sidewalk connectivity. Recommendations and lessons learned from CHP are provided.

  8. “Pre-Columbus Voyage by Chinese"——Great Navigator Zheng He

    Institute of Scientific and Technical Information of China (English)

    Manfield Zhu

    2003-01-01

    <正> "British amateur historian Gavin Menzies received a book contract Tuesday for the publication of new theory that a Chinese admiral with a fleet of 100 ships beat Columbus to America and circumnavigated the globe almost a century before Magellan."

  9. Columbus stowage optimization by cast (cargo accommodation support tool)

    Science.gov (United States)

    Fasano, G.; Saia, D.; Piras, A.

    2010-08-01

    A challenging issue related to the International Space Station utilization concerns the on-board stowage, implying a strong impact on habitability, safety and crew productivity. This holds in particular for the European Columbus laboratory, nowadays also utilized to provide the station with logistic support. The volume exploitation has to be maximized, in compliance with the given accommodation rules. At each upload step, the stowage problem must be solved quickly and efficiently. This leads to the comparison of different scenarios to select the most suitable one. Last minute upgrades, due to possible re-planning, may, moreover arise, imposing the further capability to rapidly readapt the current solution to the updated status. In this context, looking into satisfactory solutions represents a very demanding job, even for experienced designers. Thales Alenia Space Italia has achieved a remarkable expertise in the field of cargo accommodation and stowage. The company has recently developed CAST, a dedicated in-house software tool, to support the cargo accommodation of the European automated transfer vehicle. An ad hoc version, tailored to the Columbus stowage, has been further implemented and is going to be used from now on. This paper surveys the on-board stowage issue, pointing out the advantages of the proposed approach.

  10. Response of currents and water quality to changes in dam operations in Hoover Reservoir, Columbus, Ohio, August 24–28, 2015

    Science.gov (United States)

    Vonins, Branden L.; Jackson, P. Ryan

    2017-05-25

    Hoover Reservoir, an important drinking water supply for the City of Columbus, Ohio, has been the source of a series of taste and odor problems in treated drinking water during the past few years. These taste and odor problems were caused by the compounds geosmin and 2-methylisoborneol, which are thought to have been related to cyanobacteria blooms. In an effort to reduce the phosphorus available for cyanobacteria blooms at fall turnover, the City of Columbus began experimenting with the dam’s selective withdrawal system to remove excess phosphorus in the hypolimnion, which is released from bottom sediments during summer anoxic conditions.The U.S. Geological Survey completed two synoptic survey campaigns to assess distributions of water quality and water velocity in the lower part of Hoover Reservoir to provide information on the changes to reservoir dynamics caused by changing dam operations. One campaign (campaign 1) was done while water was being withdrawn from the reservoir through the dam’s middle gate and the other (campaign 2) while water was being withdrawn through the dam’s lower gate. Velocities were measured using an acoustic Doppler current profiler, and water-quality parameters were measured using an autonomous underwater vehicle equipped with water-quality sensors. Along with the water-quality and water-velocity data, meteorological, inflow and outflow discharges, and independent water-quality data were compiled to monitor changes in other parameters that affect reservoir behavior. Monthly nutrient data, collected by the City of Columbus, were also analyzed for trends in concentration during periods of expected stratification.Based on the results of the two campaigns, when compared to withdrawing water through the middle gate, withdrawing water through the lower gate seemed to increase shear-driven mixing across the thermocline, which resulted in an increase in the depth of the epilimnion throughout the lower part of Hoover Reservoir. The

  11. Guest Room Lighting at the Hilton Columbus Downtown

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-06-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code. This document is a summary case study of the report.

  12. In the footsteps of Columbus European missions to the International Space Station

    CERN Document Server

    O'Sullivan, John

    2016-01-01

    The European Space Agency has a long history of cooperating with NASA in human spaceflight, having developed the Spacelab module for carrying in the payload bay of the Space Shuttle. This book tells of the development of ESA’s Columbus microgravity science laboratory of the International Space Station and the European astronauts who work in it. From the beginning, ESA has been in close collaboration on the ISS, making a significant contribution to the station hardware. Special focus is given to Columbus and Copula as well as station resupply using the ATV. Each mission is also examined individually, creating a comprehensive picture of ESA's crucial involvement over the years. Extensive use of color photographs from NASA and ESA to depict the experiments carried out, the phases of the ISS construction, and the personal stories of the astronauts in space highlights the crucial European work on human spaceflight.

  13. Indoor radon levels in Columbus and Franklin county, Ohio residences, commercial buildings, and schools

    International Nuclear Information System (INIS)

    Grafton, H.E.

    1990-01-01

    In this paper data is presented for 2 residential radon surveys, one survey of city-owned buildings, and survey of Columbus Public Schools. The first residential survey used volunteer participants and employed a 48 hour activated carbon measurement: 4425 measurements in the data. The second survey consisted of 120 randomly selected residences in which alpha track detectors were placed for from 60 to 120 days. A survey of 52 city-owned buildings in which screening measurements were obtained using activated carbon, alpha track, and E-PERM radon detectors is included in the data. Also a survey of 25 Columbus Public Schools in which E-PERM radon monitors were used to obtain measurements is detailed in the data. More than 72% of the volunteer survey residences showed screening measurements of 4.0 pCi/L or greater while the random survey revealed 92% of the residences with radon levels of 4.0 pCi/L or higher. Schools tested in the survey also showed elevated radon levels with 20% of the tested structures with an average radon level of 4.0 pCi/L. Work is still in progress on city-owned buildings and Columbus Schools. The authors conclude that any owner or lessor of occupied buildings in Franklin County, Ohio should perform screening measurements and should be prepared to also perform follow-up measurements

  14. An early note on the occurrence of the Magnificent Frigate Bird, Fregata magnificens Mathews, 1914, in the Cape Verde Islands: Columbus as an ornithologist

    NARCIS (Netherlands)

    Hartog, den J.C.

    1993-01-01

    The importance of ornithological observations with respect to Columbus' discovery of America as recorded in the "Diario del descubrimiento" is recognized. The fact that his first and crucial crossing of the Atlantic coincided with the autumn migration may have contributed to its success. Columbus'

  15. Elevated indoor radon levels and elevated incidence of lung cancer in Columbus and Franklin County, Ohio: Cause or coincidence?

    International Nuclear Information System (INIS)

    Grafton, H.E.; West, D.R.

    1992-01-01

    Columbus, and Franklin County, Ohio, have been identified as having elevated residential radon levels. Research by the Columbus Health Department, the Ohio Department of Health, and the US Environmental Protection Agency has shown that average screening measurements for the county range from 63% to 73% above 148 Bq m -3 , 23% to 27% above 370 Bq m -3 , and 1% above 1850 Bq m -3 , for both males and females, respectively. The observed cancer rate per 100,000 persons for the period 1979-1986 for the City of Columbus was 62.8 and for the State of Ohio, 49.3, for the bronchi, lungs, and trachea. The reliability of residential radon data, the effect of smoking, mobility of residents, and other confounding factors are referenced. We suggest that while current evidence is insufficient to demonstrate a causal or coincidental relationship between elevated radon levels and higher-than-average rates of lung cancer, the measurement data suggest that Franklin County, Ohio, is an appropriate site for such research

  16. A location-inventory model for distribution centers in a three-level supply chain under uncertainty

    OpenAIRE

    Ali Bozorgi-Amiri; M. Saeed Jabalameli; Sara Gharegozloo Hamedani

    2013-01-01

    We study a location-inventory problem in a three level supply chain network under uncertainty, which leads to risk. The (r,Q) inventory control policy is applied for this problem. Besides, uncertainty exists in different parameters such as procurement, transportation costs, supply, demand and the capacity of different facilities (due to disaster, man-made events and etc). We present a robust optimization model, which concurrently specifies: locations of distribution centers to be opened, inve...

  17. Surface radiological free release program for the Battelle Columbus Laboratory Decommissioning Project

    International Nuclear Information System (INIS)

    Horton, C.N.

    1995-01-01

    This paper was prepared for the Second Residual Radioactivity and Recycling Criteria Workshop and discusses decommissioning and decontamination activities at the Battelle Columbus Laboratories Decommissioning Project (BCLDP). The BCLDP is a joint effort between the Department of Energy (DOE) and Battelle Columbus Operations to decontaminate fifteen Battelle-owned buildings contaminated with DOE radioactive materials. The privately owned buildings located across the street from The Ohio State University campus became contaminated with natural uranium and thorium during nuclear research activities. BCLDP waste management is supported by an extensive radiological free-release program. Miscellaneous materials and building surfaces have been free-released from the BCLDP. The free-release program has substantially reduced radioactive waste volumes and supported waste minimization. Free release for unrestricted use has challenged regulators and NRC licensees since the development of early surface-release criteria. This paper discusses the surface radiological free-release program incorporated by the BCLDP and the historical development of the surface radiological free-release criteria. Concerns regarding radiological free-release criteria are also presented. (author)

  18. Wild-type food in health promotion and disease prevention: the Columbus Concept

    National Research Council Canada - National Science Library

    Meester, Fabien De; Watson, Ronald R. (Ronald Ross)

    2008-01-01

    ... the expected benefits of the former versus the latter regarding quality of life. The leading market concept behind the rehabilitation of dietary/blood cholesterol is called "Columbus." Obviously, it borrows the significance of the name from the time when the earth was proven round rather than flat, and a dramatic leap was made in the way ...

  19. 76 FR 41855 - Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading

    Science.gov (United States)

    2011-07-15

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading July 13, 2011. It appears to the Securities and Exchange Commission that... Systems (GIS) Ltd. because it has not filed any periodic reports since the period ended June 30, 2008. The...

  20. 77 FR 62437 - Regulated Navigation Area; Columbus Day Weekend, Biscayne Bay, Miami, FL

    Science.gov (United States)

    2012-10-15

    ... Acronyms DHS Department of Homeland Security FR Federal Register NPRM Notice of Proposed Rulemaking RNA Regulated Navigation Area I. Regulatory History and Information On July 25, 2012, we published a Notice of... Bay Columbus Day regulated navigation area (RNA), established in 2011 and contained in 33 CFR 165.779...

  1. Temporal distribution of blood donations in three Brazilian blood centers and its repercussion on the blood supply.

    Science.gov (United States)

    Oliveira, Claudia Di Lorenzo; de Almeida-Neto, Cesar; Liu, Emily Jing; Sabino, Ester Cerdeira; Leão, Silvana Carneiro; Loureiro, Paula; Wright, David; Custer, Brian; Gonçalez, Thelma Therezinha; Capuani, Ligia; Busch, Michael; Proietti, Anna Bárbara de Freitas Carneiro

    2013-01-01

    Seasonal distribution of blood donation hinders efforts to provide a safe and adequate blood supply leading to chronic and persistent shortages. This study examined whether holidays, geographical area and donation type (community versus replacement) has any impact on the fluctuation of donations. The numbers of blood donations from 2007 through 2010 in three Brazilian Retrovirus Epidemiological Donor Study II (REDS-II) participating centers were analyzed according to the week of donation. The weeks were classified as holiday or non-holiday. To compare donations performed during holiday versus non-holiday weeks, tabulations and descriptive statistics for weekly donations by blood center were examined and time series analysis was conducted. The average weekly number of donations varied according to the blood center and type of week. The average number of donations decreased significantly during Carnival and Christmas and increased during the Brazilian National Donor Week. The fluctuation was more pronounced in Recife and Belo Horizonte when compared to São Paulo and higher among community donors. National bank holidays affect the blood supply by reducing available blood donations. Blood banks should take into account these oscillations in order to plan local campaigns, aiming at maintaining the blood supply at acceptable levels.

  2. Next Generation Luminaire (NGL) Downlight Demonstration Project, Hilton Columbus Downtown

    Energy Technology Data Exchange (ETDEWEB)

    Davis, R. G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Perrin, T. E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-09-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code.

  3. DOSIS & DOSIS 3D: long-term dose monitoring onboard the Columbus Laboratory of the International Space Station (ISS

    Directory of Open Access Journals (Sweden)

    Berger Thomas

    2016-01-01

    Full Text Available The radiation environment encountered in space differs in nature from that on Earth, consisting mostly of highly energetic ions from protons up to iron, resulting in radiation levels far exceeding the ones present on Earth for occupational radiation workers. Since the beginning of the space era, the radiation exposure during space missions has been monitored with various active and passive radiation instruments. Also onboard the International Space Station (ISS, a number of area monitoring devices provide data related to the spatial and temporal variation of the radiation field in and outside the ISS. The aim of the DOSIS (2009–2011 and the DOSIS 3D (2012–ongoing experiments was and is to measure the radiation environment within the European Columbus Laboratory of the ISS. These measurements are, on the one hand, performed with passive radiation detectors mounted at 11 locations within Columbus for the determination of the spatial distribution of the radiation field parameters and, on the other, with two active radiation detectors mounted at a fixed position inside Columbus for the determination of the temporal variation of the radiation field parameters. Data measured with passive radiation detectors showed that the absorbed dose values inside the Columbus Laboratory follow a pattern, based on the local shielding configuration of the radiation detectors, with minimum dose values observed in the year 2010 of 195–270 μGy/day and maximum values observed in the year 2012 with values ranging from 260 to 360 μGy/day. The absorbed dose is modulated by (a the variation in solar activity and (b the changes in ISS altitude.

  4. Aerial gamma-ray and magnetic survey, Columbus Quadrangle, Ohio. Final report

    International Nuclear Information System (INIS)

    1981-07-01

    The Columbus quadrangle covers a 7100 square mile area of south central Ohio which is located within the Midwestern Physiographic Province. Up to 6000 feet of Paleozoic strata overlie the east dipping Precambrian basement. Flat lying Quaternary glacial sediments cover a large part of the surface in the north and west regions of the quadrangle. A search of available literature revealed no known uranium deposits. Ninety-nine uranium anomalies were detected and are disussed briefly. Radiometric data reflect the presence of two zones of higher than average uranium anomaly occurrences. One zone is the northerly continuation of a trend observed in a contiguous quadrangle and occurs over undifferentiated Devonian and Mississippian sediments. Some anomalies appear to be culturally induced such as those in the vicinity of the city of Columbus. The outlined area in Figure 3 (indicated by a dashed contour line) should be considered for further investigation. The magnetic data indicate more structural complexity in underlying rocks than inferred by the structural interpretation of the area. The broad zones with long wavelength magnetic signatures on the east are interrupted further west by many small magnetic features whose sources may be attributed to undefined lithologic and/or structural elements in the Precambrian basement

  5. A location-inventory model for distribution centers in a three-level supply chain under uncertainty

    Directory of Open Access Journals (Sweden)

    Ali Bozorgi-Amiri

    2013-01-01

    Full Text Available We study a location-inventory problem in a three level supply chain network under uncertainty, which leads to risk. The (r,Q inventory control policy is applied for this problem. Besides, uncertainty exists in different parameters such as procurement, transportation costs, supply, demand and the capacity of different facilities (due to disaster, man-made events and etc. We present a robust optimization model, which concurrently specifies: locations of distribution centers to be opened, inventory control parameters (r,Q, and allocation of supply chain components. The model is formulated as a multi-objective mixed-integer nonlinear programming in order to minimize the expected total cost of such a supply chain network comprising location, procurement, transportation, holding, ordering, and shortage costs. Moreover, we develop an effective solution approach on the basis of multi-objective particle swarm optimization for solving the proposed model. Eventually, computational results of different examples of the problem and sensitivity analysis are exhibited to show the model and algorithm's feasibility and efficiency.

  6. Buying Program of the Standard Automated Materiel Management System. Automated Small Purchase System: Defense Supply Center Philadelphia

    National Research Council Canada - National Science Library

    2001-01-01

    The Standard Automated Materiel Management System Automated Small Purchase System is a fully automated micro-purchases system used by the General and Industrial Directorate at the Defense Supply Center Philadelphia...

  7. The End-To-End Safety Verification Process Implemented to Ensure Safe Operations of the Columbus Research Module

    Science.gov (United States)

    Arndt, J.; Kreimer, J.

    2010-09-01

    The European Space Laboratory COLUMBUS was launched in February 2008 with NASA Space Shuttle Atlantis. Since successful docking and activation this manned laboratory forms part of the International Space Station(ISS). Depending on the objectives of the Mission Increments the on-orbit configuration of the COLUMBUS Module varies with each increment. This paper describes the end-to-end verification which has been implemented to ensure safe operations under the condition of a changing on-orbit configuration. That verification process has to cover not only the configuration changes as foreseen by the Mission Increment planning but also those configuration changes on short notice which become necessary due to near real-time requests initiated by crew or Flight Control, and changes - most challenging since unpredictable - due to on-orbit anomalies. Subject of the safety verification is on one hand the on orbit configuration itself including the hardware and software products, on the other hand the related Ground facilities needed for commanding of and communication to the on-orbit System. But also the operational products, e.g. the procedures prepared for crew and ground control in accordance to increment planning, are subject of the overall safety verification. In order to analyse the on-orbit configuration for potential hazards and to verify the implementation of the related Safety required hazard controls, a hierarchical approach is applied. The key element of the analytical safety integration of the whole COLUMBUS Payload Complement including hardware owned by International Partners is the Integrated Experiment Hazard Assessment(IEHA). The IEHA especially identifies those hazardous scenarios which could potentially arise through physical and operational interaction of experiments. A major challenge is the implementation of a Safety process which owns quite some rigidity in order to provide reliable verification of on-board Safety and which likewise provides enough

  8. Carbon and hydrogen isotopic variations of natural gases in the southeast Columbus basin offshore southeastern Trinidad, West Indies - clues to origin and maturity

    International Nuclear Information System (INIS)

    Norville, Giselle A.; Dawe, Richard A.

    2007-01-01

    Natural gas can have two distinct origins, biogenic and thermogenic sources. This paper investigates the types and maturities of natural gas present in the SE Columbus basin, offshore Trinidad. The chemical composition and the isotope ratios of C and H were determined for approximately 100 samples of natural gas from eight areas within the SE Columbus basin. These compositions and isotopic data are interpreted to identify the origins of gas (biogenic, thermogenic) and maturity. The data showed that the gases in the SE Columbus basin are of both biogenic and thermogenic origin with a trend of mainly thermogenic to mixed to biogenic when moving from SW to NE across the basin. This trend suggests differential burial of the source rock. The presence of mixed gas indicates there was migration of gas in the basin resulting in deeper thermogenic gas mixing with shallow biogenic gas

  9. Rapid prototyping, astronaut training, and experiment control and supervision: distributed virtual worlds for COLUMBUS, the European Space Laboratory module

    Science.gov (United States)

    Freund, Eckhard; Rossmann, Juergen

    2002-02-01

    In 2004, the European COLUMBUS Module is to be attached to the International Space Station. On the way to the successful planning, deployment and operation of the module, computer generated and animated models are being used to optimize performance. Under contract of the German Space Agency DLR, it has become IRF's task to provide a Projective Virtual Reality System to provide a virtual world built after the planned layout of the COLUMBUS module let astronauts and experimentators practice operational procedures and the handling of experiments. The key features of the system currently being realized comprise the possibility for distributed multi-user access to the virtual lab and the visualization of real-world experiment data. Through the capabilities to share the virtual world, cooperative operations can be practiced easily, but also trainers and trainees can work together more effectively sharing the virtual environment. The capability to visualize real-world data will be used to introduce measured data of experiments into the virtual world online in order to realistically interact with the science-reference model hardware: The user's actions in the virtual world are translated into corresponding changes of the inputs of the science reference model hardware; the measured data is than in turn fed back into the virtual world. During the operation of COLUMBUS, the capabilities for distributed access and the capabilities to visualize measured data through the use of metaphors and augmentations of the virtual world may be used to provide virtual access to the COLUMBUS module, e.g. via Internet. Currently, finishing touches are being put to the system. In November 2001 the virtual world shall be operational, so that besides the design and the key ideas, first experimental results can be presented.

  10. Flood-inundation maps for the Flatrock River at Columbus, Indiana, 2012

    Science.gov (United States)

    Coon, William F.

    2013-01-01

    Digital flood-inundation maps for a 5-mile reach of the Flatrock River on the western side of Columbus, Indiana, from County Road 400N to the river mouth at the confluence with Driftwood River, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ and the Federal Flood Inundation Mapper Web site at http://wim.usgs.gov/FIMI/FloodInundationMapper.html, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Flatrock River at Columbus (station number 03363900). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service, which also presents the USGS data, at http:/water.weather.gov/ahps/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the most current stage-discharge relation at the Flatrock River streamgage, high-water marks that were surveyed following the flood of June 7, 2008, and water-surface profiles from the current flood-insurance study for the City of Columbus. The hydraulic model was then used to compute 12 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft or near bankfull to 20 ft, which exceeds the stages that correspond to both the estimated 0.2-percent annual exceedance probability flood (500-year recurrence interval flood) and the maximum recorded peak flow. The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from Light Detection and Ranging (LiDAR) data having a 0.37 ft

  11. SEA SURFACE TEMPERATURE and Other Data from COLUMBUS and Other Platforms from 19250801 to 19320914 (NODC Accession 9400016)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Sea Surface Temperatures (SST) data from 1925 to 1932 collected using ships COLUMBUS and EUROPA was submitted in two diskettes by Dr. Gerd Becker, Bundesamt fuer...

  12. 78 FR 58995 - Foreign-Trade Zone (FTZ) 138-Columbus, Ohio; Notification of Proposed Production Activity; Rolls...

    Science.gov (United States)

    2013-09-25

    ... Gas Turbines, Power Generation Turbines, and Generator Sets); Mount Vernon, Ohio The Columbus Regional... production of industrial gas turbines, power generation turbines, and generator sets. Pursuant to 15 CFR 400... status components used in export production. On its domestic sales, RRES would be able to choose the duty...

  13. The Struggle for Industrial Education in the "Lowell of the South," Columbus, Georgia, 1850-1930

    Science.gov (United States)

    Bradshaw, Lauren Yarnell; Bohan, Chara Haeussler

    2013-01-01

    The history of Columbus, Georgia, cannot be separated from that of the local textile mills; the mills were important in defining the economic success, the social struggles, and the enduring legacy of southern industrial tycoons. Evidence of this industrial past can be seen on almost every street, school, and business located in the city along the…

  14. Laparoscopic donor nephrectomy increases the supply of living donor kidneys: a center-specific microeconomic analysis.

    Science.gov (United States)

    Kuo, P C; Johnson, L B

    2000-05-27

    A tenet of microeconomics is that new technology will shift the supply curve to the right. Laparoscopic donor nephrectomy (LDN) is a new technique for removal of living donor kidneys. Centers performing this procedure have noted an increased number of patients presenting for donor evaluation. This has not been previously studied. The records of all LDN performed from May 1998 to February 1999 were reviewed. The following variables were examined: sex, age, related vs. unrelated donation, estimated blood loss, i.v. analgesia, length of stay, and time out of work. Donors undergoing traditional open donor nephrectomy during January 1997 to May 1998 served as the control group. A composite cost index was constructed. LDN significantly decreased length of stay, pain, and time out of work; the supply function shifted to the right. Telephone interviews revealed that 47% donated solely because of the LDN procedure. LDN increases the supply of living donor kidneys.

  15. Students build glovebox at Space Science Center

    Science.gov (United States)

    2001-01-01

    Students in the Young Astronaut Program at the Coca-Cola Space Science Center in Columbus, GA, constructed gloveboxes using the new NASA Student Glovebox Education Guide. The young astronauts used cardboard copier paper boxes as the heart of the glovebox. The paper boxes transformed into gloveboxes when the students pasted poster-pictures of an actual NASA microgravity science glovebox inside and outside of the paper boxes. The young astronauts then added holes for gloves and removable transparent top covers, which completed the construction of the gloveboxes. This image is from a digital still camera; higher resolution is not available.

  16. Large Cluster of Neisseria meningitidis Urethritis in Columbus, Ohio, 2015.

    Science.gov (United States)

    Bazan, Jose A; Turner, Abigail Norris; Kirkcaldy, Robert D; Retchless, Adam C; Kretz, Cecilia B; Briere, Elizabeth; Tzeng, Yih-Ling; Stephens, David S; Maierhofer, Courtney; Del Rio, Carlos; Abrams, A Jeanine; Trees, David L; Ervin, Melissa; Licon, Denisse B; Fields, Karen S; Roberts, Mysheika Williams; Dennison, Amanda; Wang, Xin

    2017-07-01

    Neisseria meningitidis (Nm) is a Gram-negative diplococcus that normally colonizes the nasopharynx and rarely infects the urogenital tract. On Gram stain of urethral exudates, Nm can be misidentified as the more common sexually transmitted pathogen Neisseria gonorrhoeae. In response to a large increase in cases of Nm urethritis identified among men presenting for screening at a sexually transmitted disease clinic in Columbus, Ohio, we investigated the epidemiologic characteristics of men with Nm urethritis and the molecular and phylogenetic characteristics of their Nm isolates. The study was conducted between 1 January and 18 November 2015. Seventy-five Nm urethritis cases were confirmed by biochemical and polymerase chain reaction testing. Men with Nm urethritis were a median age of 31 years (interquartile range [IQR] = 24-38) and had a median of 2 sex partners in the last 3 months (IQR = 1-3). Nm cases were predominantly black (81%) and heterosexual (99%). Most had urethral discharge (91%), reported oral sex with a female in the last 12 months (96%), and were treated with a ceftriaxone-based regimen (95%). A minority (15%) also had urethral chlamydia coinfection. All urethral Nm isolates were nongroupable, ST-11 clonal complex (cc11), ET-15, and clustered together phylogenetically. Urethral Nm isolates were similar by fine typing (PorA P1.5-1,10-8, PorB 2-2, FetA F3-6), except 2, which had different PorB types (2-78 and 2-52). Between January and November 2015, 75 urethritis cases due to a distinct Nm clade occurred among primarily black, heterosexual men in Columbus, Ohio. Future urogenital Nm infection studies should focus on pathogenesis and modes of sexual transmission. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

  17. ENVIRONMENTAL TECHNOLOGY VERIFICATION, TEST REPORT OF CONTROL OF BIOAEROSOLS IN HVAC SYSTEMS, COLUMBUS INDUSTRIES SL-3 RING PANEL

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the High Efficiency Mini Pleat air filter for dust and bioaerosol filtration manufactured by Columbus Industries. The pressure drop across the filter was 142 Pa clean and 283 Pa dust load...

  18. A multi-objective model for locating distribution centers in a supply chain network considering risk and inventory decisions

    Directory of Open Access Journals (Sweden)

    Sara Gharegozloo Hamedani

    2013-04-01

    Full Text Available This paper presents a multi-objective location problem in a three level supply chain network under uncertain environment considering inventory decisions. The proposed model of this paper considers uncertainty for different parameters including procurement, transportation costs, supply, demand and the capacity of various facilities. The proposed model presents a robust optimization model, which specifies locations of distribution centers to be opened, inventory control parameters (r, Q, and allocation of supply chain components, concurrently. The resulted mixed-integer nonlinear programming minimizes the expected total cost of such a supply chain network comprising location, procurement, transportation, holding, ordering, and shortage costs. The model also minimizes the variability of the total cost of relief chain and minimizes the financial risk or the probability of not meeting a certain budget. We use the ε-constraint method, which is a multi-objective technique with implicit trade-off information given, to solve the problem and using a couple of numerical instances, we examine the performance of the proposed approach.

  19. [Outline and effectiveness of support system in the surgical center by supply, processing and distribution center (SPD)].

    Science.gov (United States)

    Ito, Nobuko; Chinzei, Mieko; Fujiwara, Haruko; Usui, Hisako; Hanaoka, Kazuo; Saitoh, Eisho

    2006-04-01

    Supply, Processing and Distribution system had been introduced to surgical center (the University of Tokyo Hospital) since October of 2002. This system had reduced stock for medicine and materials and decreased medical cost dramatically. We designed some kits for therapeutic drugs related to anesthesia. They were prepared for general anesthesia, epidural and spinal anesthesia, and cardiovascular anesthesia, respectively. One kit had been used for one patient, and new kits were prepared in the anesthesia preparation room by pharmaceutical department staffs. Equipment, for general anesthesia as well as epidural and spinal anesthesia, and central catheter set were also designed and provided for each patient by SPD system. According to the questionnaire of anesthesia residents before and after introduction of SPD system, the time spent for anesthesia preparation had been reduced and 92.3% residents had answered that preparation for anesthesia on the previous day was getting easier. Most of the anesthesia residents had been less stressed after introduction of SPD system. Beside the dramatic economical effect, coordination with SPD system and pharmaceutical department reduced anesthesia preparation time and stress of the staff. Introduction of Support system of SPD to surgical center is important for safe and effective management of operating rooms.

  20. [Supply and nutritional composition of salads in the food courts of shopping centers of Metropolitan Lima, 2014].

    Science.gov (United States)

    Bustamante-García, Marifé; Martinez-Feliu, Montserrat; Servan, Karin; Mayta-Tristán, Percy

    2015-10-01

    To assess supply and nutritional composition of the salads offered as an entrée main course in the food courts of the shopping centers in Lima, Peru. The menus of all food franchises present in the food courts of the eleven shopping centers of Lima were reviewed. The nutritional composition of salads offered as an entrée were calculated for calories, protein content, carbohydrates, fats, cholesterol, fiber and sodium, and the adequacy of intake for a dinner (30% of a diet of 2000 kcal). Salads as entrées accounted for 4.7% of the supply, and only 7 out of 17 franchises offered at least one salad. The average cost of the salads was higher than the other dishes ($5.3 vs $4.7; p<0.001). The average calorie content was 329 kcal and 2.7 g fiber; in relation to a dinner, we found a high percentage of adequacy for protein (172.9%), cholesterol (121.0%), and low adequacy for calories (54.8%), carbohydrates (23.1%) and fiber (36.4%). The salads that are offered in food courts in the shopping centers of Lima are scarce and more expensive, have little fiber content and are high in cholesterol. Strategies should be reviewed to improve the accessibility of quality salads offered in areas where only fast food is offered.

  1. Christopher Columbus, Hernando Cortes, and Francisco Pizzaro: A Qualitative Content Analysis Examining Cultural Bias in World History Textbooks

    Science.gov (United States)

    Lillejord, Jebadiah Serril

    2013-01-01

    The purpose of this study is to investigate to what extent contemporary high school world history textbooks portray Christopher Columbus, Hernán Cortés, and Francisco Pizarro within the context of being "sacred," "profane," or someplace in between. To evaluate for existence of content bias this study employed qualitative…

  2. DOSIS & DOSIS 3D: long-term dose monitoring onboard the Columbus Laboratory of the International Space Station (ISS)

    Czech Academy of Sciences Publication Activity Database

    Berger, T.; Przybyla, B.; Matthia, D.; Reitz, G.; Burmeister, S.; Labrenz, J.; Bilski, P.; Horwacik, T.; Twardak, A.; Hajek, M.; Fugger, M.; Hofstatter, C.; Sihver, L.; Palfalvi, J. K.; Szabó, J.; Stradi, A.; Ambrožová, Iva; Kubančák, Ján; Brabcová, Kateřina; Vanhavere, F.; Cauwels, V.; Van Hoey, O.; Schoonjans, W.; Parisi, A.; Gaza, R.; Semones, E.; Yukihara, E.; Benton, E.; Doull, B. A.; Uchihori, Y.; Kodaira, S.; Kitamura, H.; Böhme, M.

    2016-01-01

    Roč. 6, NOV (2016), č. článku A39. ISSN 2115-7251 R&D Projects: GA ČR GJ15-16622Y Institutional support: RVO:61389005 Keywords : International Space Station * Columbus * space radiation * DOSIS * DOSIS 3D Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 2.446, year: 2016

  3. Charging Electric Vehicles in Smart Cities: An EVI-Pro Analysis of Columbus, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Eric W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rames, Clement L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Srinivasa Raghavan, Sesha [National Renewable Energy Lab. (NREL), Golden, CO (United States); Young, Stanley E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-02-09

    With the support of the U.S. Department of Energy's Vehicle Technologies Office, the National Renewable Energy Laboratory (NREL) worked with the City of Columbus, Ohio, to develop a plan for the expansion of the region's network of charging stations to support increased adoption of plug-in electric vehicles (PEVs) in the local market. NREL's Electric Vehicle Infrastructure Projection (EVI-Pro) model was used to generate scenarios of regional charging infrastructure to support consumer PEV adoption. Results indicate that approximately 400 Level 2 plugs at multi-unit dwellings and 350 Level 2 plugs at non-residential locations are required to support Columbus' primary PEV goal of 5,300 PEVs on the road by the end of 2019. This analysis finds that while consumer demand for fast charging is expected to remain low (due to modest anticipated adoption of short-range battery electric vehicles), a minimum level of fast charging coverage across the city is required to ease consumer range anxiety concerns by providing a safety net for unexpected charging events. Sensitivity analyses around some key assumptions have also been performed; of these, consumer preference for PHEV versus BEV and for their electric driving range, ambient conditions, and availability of residential charging at multi-unit dwellings were identified as key determinants of the non-residential PEV charging infrastructure required to support PEV adoption. The results discussed in this report can be leveraged by similar U.S. cities as part of a strategy to accelerate PEV adoption in the light-duty vehicle market.

  4. The Designing and Development of a "Balanced Scorecard" for the International Procurement Department of the Procurement Directorate in the Hellenic Navy Supply Center

    National Research Council Canada - National Science Library

    Polymenidis, Ilias

    2003-01-01

    ...) in the Hellenic Navy Supply Center, Initially, the study analyzed the IPD's environment, mission, strategy, desired outcomes, critical processes, and key success factors, After clarifying strategy...

  5. Exploration Supply Chain Simulation

    Science.gov (United States)

    2008-01-01

    The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.

  6. Oceanographic profile temperature, salinity, oxygen, and nutrients measurements collected using bottle from the Iselin Columbus in the Indian Ocean (Somalia Coast) (NODC Accession 0002225)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and nutrients data were collected using bottle casts from the COLUMBUS ISELIN in the Indian Ocean. Data were collected from 26 February 1979 to...

  7. Analysis of logistic distribution performance of good supply from PT. Mentari Trans Nusantara distribution center to branches using Smart PLS 3.0

    Science.gov (United States)

    Endrawati, Titin; Siregar, M. Tirtana

    2018-03-01

    PT Mentari Trans Nusantara is a company engaged in the distribution of goods from the manufacture of the product to the distributor branch of the customer so that the product distribution must be controlled directly from the PT Mentari Trans Nusantara Center for faster delivery process. Problems often occur on the expedition company which in charge in sending the goods although it has quite extensive networking. The company is less control over logistics management. Meanwhile, logistics distribution management control policy will affect the company's performance in distributing products to customer distributor branches and managing product inventory in distribution center. PT Mentari Trans Nusantara is an expedition company which engaged in good delivery, including in Jakarta. Logistics management performance is very important due to its related to the supply of goods from the central activities to the branches based oncustomer demand. Supply chain management performance is obviously depends on the location of both the distribution center and branches, the smoothness of transportation in the distribution and the availability of the product in the distribution center to meet the demand in order to avoid losing sales. This study concluded that the company could be more efficient and effective in minimizing the risks of loses by improve its logistic management.

  8. UNCERTAINTY SUPPLY CHAIN MODEL AND TRANSPORT IN ITS DEPLOYMENTS

    Directory of Open Access Journals (Sweden)

    Fabiana Lucena Oliveira

    2014-05-01

    Full Text Available This article discusses the Model Uncertainty of Supply Chain, and proposes a matrix with their transportation modes best suited to their chains. From the detailed analysis of the matrix of uncertainty, it is suggested transportation modes best suited to the management of these chains, so that transport is the most appropriate optimization of the gains previously proposed by the original model, particularly when supply chains are distant from suppliers of raw materials and / or supplies.Here we analyze in detail Agile Supply Chains, which is a result of Uncertainty Supply Chain Model, with special attention to Manaus Industrial Center. This research was done at Manaus Industrial Pole, which is a model of industrial agglomerations, based in Manaus, State of Amazonas (Brazil, which contemplates different supply chains and strategies sharing same infrastructure of transport, handling and storage and clearance process and uses inbound for suppliers of raw material.  The state of art contemplates supply chain management, uncertainty supply chain model, agile supply chains, Manaus Industrial Center (MIC and Brazilian legislation, as a business case, and presents concepts and features, of each one. The main goal is to present and discuss how transport is able to support Uncertainty Supply Chain Model, in order to complete management model. The results obtained confirms the hypothesis of integrated logistics processes are able to guarantee attractivity for industrial agglomerations, and open discussions when the suppliers are far from the manufacturer center, in a logistics management.

  9. Processing DOD Thrift Savings Plan Contributions

    National Research Council Canada - National Science Library

    Lane, F

    1996-01-01

    .... This part of our audit focused on the processing of individual contributions to the TSP at two DFAS payroll offices at the DFAS Columbus Center, Columbus, Ohio, and Bolling Air Force Base (AFB), Washington, D.C...

  10. Temperature data from buoy casts in the North Atlantic Ocean from the COLUMBUS and HMAS SWAN from 01 August 1928 to 04 September 1932 (NODC Accession 0000242)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature data were collected using buoy casts from the COLUMBUS and HMAS SWAN from August 1, 1928 to September 4, 1932 in the North Atlantic Ocean. Data were...

  11. A multi-objective possibilistic programming approach for locating distribution centers and allocating customers demands in supply chains

    Directory of Open Access Journals (Sweden)

    Seyed Ahmad Yazdian

    2011-01-01

    Full Text Available In this paper, we present a multi-objective possibilistic programming model to locate distribution centers (DCs and allocate customers' demands in a supply chain network design (SCND problem. The SCND problem deals with determining locations of facilities (DCs and/or plants, and also shipment quantities between each two consecutive tier of the supply chain. The primary objective of this study is to consider different risk factors which are involved in both locating DCs and shipping products as an objective function. The risk consists of various components: the risks related to each potential DC location, the risk associated with each arc connecting a plant to a DC and the risk of shipment from a DC to a customer. The proposed method of this paper considers the risk phenomenon in fuzzy forms to handle the uncertainties inherent in these factors. A possibilistic programming approach is proposed to solve the resulted multi-objective problem and a numerical example for three levels of possibility is conducted to analyze the model.

  12. Custom 3D Printers Revolutionize Space Supply Chain

    Science.gov (United States)

    2015-01-01

    Under a series of SBIR contracts with Marshall Space Flight Center, start-up company Made In Space, located on the center's campus, developed a high-precision 3D printer capable of manufacturing items in microgravity. The company will soon have a printer installed on the International Space Station, altering the space supply chain. It will print supplies and tools for NASA, as well as nanosatellite shells and other items for public and private entities.

  13. DOSIS & DOSIS 3D: radiation measurements with the DOSTEL instruments onboard the Columbus Laboratory of the ISS in the years 2009-2016

    Czech Academy of Sciences Publication Activity Database

    Berger, T.; Burmeister, S.; Matthiae, D.; Przybyla, B.; Reitz, G.; Bilski, P.; Hajek, M.; Sihver, L.; Szabó, J.; Ambrožová, Iva; Vanhavere, F.; Gaza, R.; Semones, E.; Yukihara, E. G.; Benton, E.; Uchihori, Y.; Kodaira, S.; Kitamura, H.; Böhme, M.

    2017-01-01

    Roč. 7, MAR (2017), č. článku A8. ISSN 2115-7251 R&D Projects: GA ČR GJ15-16622Y Institutional support: RVO:61389005 Keywords : International Space Station * Columbus * space radiation * DOSTEL * DOSIS 3D Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics OBOR OECD: Astronomy (including astrophysics, space science) Impact factor: 2.446, year: 2016

  14. Rebecca Hanes | NREL

    Science.gov (United States)

    the Strategic Energy Analysis Center. Areas of Expertise Mathematical and theoretical aspects of life University, Columbus, OH, 2014 M.S. in applied statistics, The Ohio State University, Columbus, OH, 2013 B.S Multiscale Modeling Framework for Sustainable Process Design Applications." Sustainability of Products

  15. Public Water Supply Systems (PWS)

    Data.gov (United States)

    Kansas Data Access and Support Center — This dataset includes boundaries for most public water supply systems (PWS) in Kansas (525 municipalities, 289 rural water districts and 13 public wholesale water...

  16. Statement of Accountability Reconciliation Procedures for Defense Finance and Accounting Service Columbus Center, Disbursing Station 6551

    National Research Council Canada - National Science Library

    1998-01-01

    .... Beginning in FY 1996, the Defense Finance and Accounting Service (DFAS) Indianapolis Center became responsible for preparing the financial statements for the Department 97 general fund appropriations...

  17. Evaluating the Security of the Global Containerized Supply Chain

    National Research Council Canada - National Science Library

    Willis, Henry H; Ortiz, David S

    2004-01-01

    The global supply chain is the network of suppliers, manufacturing centers, warehouses, distribution centers, and retail outlets that transforms raw materials into finished products and delivers them to consumers...

  18. Intermediate-term uranium supply curve estimation. Final report, February 1981

    International Nuclear Information System (INIS)

    Steyn, J.J.; Goudarzi, L.A.; Douglas, R.F.

    1981-02-01

    The study was undertaken to estimate US natural uranium supply capacities and associated economic costs over the intermediate term period, 1979 to 1990, and to develop the general supply outlook to 2000. Annual supply capacity schedules were estimated on an individual mill and mine family (production center) basis. Future production schedules were estimated by balancing estimated supply capacity with DOE future demand projections ranging from 150 GWe to 396 GWe of installed nuclear capacity in 2000; the impact of private sector inventory levels was accounted for. The long run economic cost of production was estimated by applying a specifically derived production cost model to individual mines and mills using available data, as for example, ore depths, grades, production type and capacity, mill recovery; economic assumptions, as for example, 16% return on equity, were also made. The study report presents details of the methodology and data used, and the results obtained; the production center assessment, the supply/cost curves developed, and the cost models used, are also presented. For the current trend outlook, the results indicate that existing and under-construction centers can meet the bulk of demand through 1990, and that new centers will be required to meet substantial shortfalls in the 1990s. The study indicated that the US average long run economic cost of $30 per pound in 1979, in constant dollars, will begin to increase after 1985 at between 4 and 5%

  19. Center for Corporate Climate Leadership Success Stories: Case Studies in Supply Chain Engagement

    Science.gov (United States)

    The case studies on this page provide successful examples of companies engaging with their supply chains to reduce their greenhouse gas emissions, understand their shifting supply chain risks, and take advantage of market opportunities.

  20. Weighing Efficiency-Robustness in Supply Chain Disruption by Multi-Objective Firefly Algorithm

    Directory of Open Access Journals (Sweden)

    Tong Shu

    2016-03-01

    Full Text Available This paper investigates various supply chain disruptions in terms of scenario planning, including node disruption and chain disruption; namely, disruptions in distribution centers and disruptions between manufacturing centers and distribution centers. Meanwhile, it also focuses on the simultaneous disruption on one node or a number of nodes, simultaneous disruption in one chain or a number of chains and the corresponding mathematical models and exemplification in relation to numerous manufacturing centers and diverse products. Robustness of the design of the supply chain network is examined by weighing efficiency against robustness during supply chain disruptions. Efficiency is represented by operating cost; robustness is indicated by the expected disruption cost and the weighing issue is calculated by the multi-objective firefly algorithm for consistency in the results. It has been shown that the total cost achieved by the optimal target function is lower than that at the most effective time of supply chains. In other words, the decrease of expected disruption cost by improving robustness in supply chains is greater than the increase of operating cost by reducing efficiency, thus leading to cost advantage. Consequently, by approximating the Pareto Front Chart of weighing between efficiency and robustness, enterprises can choose appropriate efficiency and robustness for their longer-term development.

  1. Land transportation model for supply chain manufacturing industries

    Science.gov (United States)

    Kurniawan, Fajar

    2017-12-01

    Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

  2. Smart Columbus : Systems Engineering Management Plan (SEMP) for Smart Columbus Demonstration Program

    Science.gov (United States)

    2018-01-16

    The Smart City Demonstration Program is intended to improve access through expanded mobility options in major job centers, enhance visitor experience by better connecting visitors to transportation options, stimulate regional economic prosperity and ...

  3. Designing value-creating supply chain networks

    CERN Document Server

    Martel, Alain

    2016-01-01

    Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

  4. PARTICULATE ORGANIC CARBON, cloud amount/frequency and other data from COLUMBUS ISELIN in the North American Coastline-South and South Atlantic Ocean from 1990-05-23 to 1990-06-13 (NODC Accession 9100150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data was collected from R/V COLUMBUS ISELIN in South Atlantic Ocean and North American Coast line-South during the Amazon Shelf Sediment Study (AMASSEDS) between May...

  5. Notes from the Field: Increase in Neisseria meningitidis-Associated Urethritis Among Men at Two Sentinel Clinics - Columbus, Ohio, and Oakland County, Michigan, 2015.

    Science.gov (United States)

    Bazan, Jose A; Peterson, Amy S; Kirkcaldy, Robert D; Briere, Elizabeth C; Maierhofer, Courtney; Turner, Abigail Norris; Licon, Denisse B; Parker, Nicole; Dennison, Amanda; Ervin, Melissa; Johnson, Laura; Weberman, Barbara; Hackert, Pamela; Wang, Xin; Kretz, Cecilia B; Abrams, A Jeanine; Trees, David L; Del Rio, Carlos; Stephens, David S; Tzeng, Yih-Ling; DiOrio, Mary; Roberts, Mysheika Williams

    2016-06-03

    Neisseria meningitidis (Nm) urogenital infections, although less common than infections caused by Neisseria gonorrhoeae (Ng), have been associated with urethritis, cervicitis, proctitis, and pelvic inflammatory disease. Nm can appear similar to Ng on Gram stain analysis (gram-negative intracellular diplococci) (1-5). Because Nm colonizes the nasopharynx, men who receive oral sex (fellatio) can acquire urethral Nm infections (1,3,5). This report describes an increase in Nm-associated urethritis in men attending sexual health clinics in Columbus, Ohio, and Oakland County, Michigan.

  6. Vehicle Routing Problem for Fashion Supply Chains with Cross-Docking

    Directory of Open Access Journals (Sweden)

    Zhi-Hua Hu

    2013-01-01

    Full Text Available Cross-docking, as a strategy to reduce lead time and enhance the efficiency of the fashion supply chain, has attracted substantial attention from both the academy and the industry. Cross-docking is a critical part of many fashion and textiles supply chains in practice because it can help to achieve many supply chain strategies such as postponement. We consider a model where there are multiple suppliers and customers in a single cross-docking center. With such a model setting, the issue concerning the coordinated routing between the inbound and outbound routes is much more complex than many traditional vehicle routing problems (VRPs. We formulate the optimal route selection problems from the suppliers to the cross-docking center and from the cross-docking center to the customers as the respective VRPs. Based on the relationships between the suppliers and the customers, we integrate the two VRP models to optimize the overall traveling time, distance, and waiting time at the cross-docking center. In addition, we propose a novel mixed 0/1 integer linear programming model by which the complexity of the problem can be reduced significantly. As demonstrated by the simulation analysis, our proposed model can be solved very efficiently by a commonly used optimization software package.

  7. Designing reliable supply chain network with disruption risk

    Directory of Open Access Journals (Sweden)

    Ali Bozorgi Amiri

    2013-01-01

    Full Text Available Although supply chains disruptions rarely occur, their negative effects are prolonged and severe. In this paper, we propose a reliable capacitated supply chain network design (RSCND model by considering random disruptions in both distribution centers and suppliers. The proposed model determines the optimal location of distribution centers (DC with the highest reliability, the best plan to assign customers to opened DCs and assigns opened DCs to suitable suppliers with lowest transportation cost. In this study, random disruption occurs at the location, capacity of the distribution centers (DCs and suppliers. It is assumed that a disrupted DC and a disrupted supplier may lose a portion of their capacities, and the rest of the disrupted DC's demand can be supplied by other DCs. In addition, we consider shortage in DCs, which can occur in either normal or disruption conditions and DCs, can support each other in such circumstances. Unlike other studies in the extent of literature, we use new approach to model the reliability of DCs; we consider a range of reliability instead of using binary variables. In order to solve the proposed model for real-world instances, a Non-dominated Sorting Genetic Algorithm-II (NSGA-II is applied. Preliminary results of testing the proposed model of this paper on several problems with different sizes provide seem to be promising.

  8. Ergonomic analysis of the work conditions of porters and owners of the Supply Center of Campinas, SP.

    Science.gov (United States)

    Vedovato, Tatiana Giovanelli; Monteiro, Maria Inës; Masson, Valéria Aparecida

    2012-01-01

    Transforming work conditions is part of the ergonomic action that should help to improve work situations that brings risks to the workers health. six workers were observed in different locations of the supply center (Central Free Market, Free Market 2, Flowers Market and Permanent Shed 4). During the observation of workers to the Ergonomic Analysis of Work - AET (Rohmert and Landau) was performed. The workers were divided into two groups: porters and owners. The porters were the most susceptible to the risks of work and minor accidents with sharp wood from boxes or even risk of traffic accidents as pedestrians. However, regarding the use of mental ability for negotiations, use of computers and organizing and planning the establishment of work, the owners were the ones that most time played these activities. The ergonomics advocates work that can be transformed and that favors employee and employer. It is, therefore, intended to redefine the strategies that are embedded into the organizational structure of work.

  9. Calculation of particulate dispersion in a design-basis tornadic storm from the Battelle Memorial Institute, Columbus, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Pepper, D.W.

    1980-10-01

    A three-dimensional numerical model is used to calculate ground-level air concentration and deposition (due to precipitation scavenging) after a hypothetical tornado strike at the Battelle Memorial Institute at Columbus, Ohio. Plutonium particles less than 20 ..mu..m in diameter are assumed to be lifted into the tornadic storm cell by the vortex. The rotational characteristics of the tornadic storm are embedded within the larger mesoscale flow of the storm system. The design-basis translational wind value is based on probabilities associated with existing records of tornado strikes in the vicinity of the plant site. Turbulence exchange coefficients are based on empirical values deduced from experimental data in severe storms and from theoretical assumptions obtained from the literature. The method of moments is used to incorporate subgrid-scale resolution of the concentration within a grid cell volume.

  10. Calculation of particulate dispersion in a design-basis tornadic storm from the Battelle Memorial Institute, Columbus, Ohio

    International Nuclear Information System (INIS)

    Pepper, D.W.

    1980-10-01

    A three-dimensional numerical model is used to calculate ground-level air concentration and deposition (due to precipitation scavenging) after a hypothetical tornado strike at the Battelle Memorial Institute at Columbus, Ohio. Plutonium particles less than 20 μm in diameter are assumed to be lifted into the tornadic storm cell by the vortex. The rotational characteristics of the tornadic storm are embedded within the larger mesoscale flow of the storm system. The design-basis translational wind value is based on probabilities associated with existing records of tornado strikes in the vicinity of the plant site. Turbulence exchange coefficients are based on empirical values deduced from experimental data in severe storms and from theoretical assumptions obtained from the literature. The method of moments is used to incorporate subgrid-scale resolution of the concentration within a grid cell volume

  11. ESA Press Event: See Mars Express before its departure to the Red Planet

    Science.gov (United States)

    2002-08-01

    There will be ten participants: four ESA astronauts (Pedro Duque, Leopold Eyharts, Paolo Nespoli and Thomas Reiter), four Japanese astronauts from NASDA (Takao Doi, Koichi Wakata, Satoshi Furukawa and Aikihido Hoshide) and two NASA astronauts (Nicole Passonno Stott and Stephanie D. Wilson). The main objective of this training session is to prepare the astronauts for the tasks they will have to perform when the Japanese experiment module (JEM) and ESA's Columbus laboratory are docked with the core of the International Space Station over the years ahead. After completing their training and certification, the astronauts will be assigned to long-duration missions to the ISS. The advanced training at the EAC will focus on the Columbus systems and the Automated Transfer Vehicle (ATV). It will consist of 24 classroom lectures on the Columbus and ATV systems and 4 on payloads, and 2 sessions in the Columbus Trainer. Instructors are being provided by Astrium for the Columbus systems and Alenia Spazio for the ATV, with ESA/EAC staff as mentors for the Columbus payloads. The astronauts are scheduled to visit Astrium in Bremen on 30 August to get acquainted with the flight unit of the Columbus laboratory module currently undergoing integration. This group of astronauts started their advanced training in April 2001 at NASA's Johnson Space Center (JSC), Houston, where they attended a first course on the US segment of the International Space Station. This was followed by training on the JEM system at NASDA's Tsukuba Space Center, Japan, in December 2001 - January 2002 and additional training at the JSC in May 2002. At the beginning of next year the group will be returning to Tsukuba for training on Japanese payloads. Hands-on sessions on Columbus Payload Training Models are scheduled for the second half of 2003, again at ESA's European Astronaut Centre. On Thursday 5 September, between 16:30 and 18:30 hrs, the astronauts and other ESA specialists will be available for interviews

  12. Water physical and chemical data from current meter and bottle casts from the COLUMBUS ISELIN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1975-10-27 to 1975-11-06 (NODC Accession 7700454)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the COLUMBUS ISELIN from October 27, 1975 to November 6, 1975. Data were...

  13. Supply of FDG : production and distribution

    International Nuclear Information System (INIS)

    Pilloy, W.J.; Fallais, A.

    2004-01-01

    Full text: Aim: To review the means of production of PET tracers and the logistIcs of their distribution, with special emphasis on 18 FDG - from an end-user point of view. Material and method: The experience of a satellite center (i.e. without in-house cyclotron) over one year. Results: The following topics are presented: Basic introduction to FDG and its radio-synthesis; properties of cyclotrons and linear accelerators; the economics of buying and running a cyclotron to produce FDG; satellite facilities (availability from radiopharmacies; fraction of FDG in the cost of running a PET center; recent developments in PET cameras, and their implications of FDG supply; diversification in the offer of commercial PET tracers; regulatory issues, and their influence on FDG supply; possible developments in onco-PET, neuro-PET, cardio-PET; generators and full PET Nuclear Medicine. Conclusion: The European experience is not necessarily completely applicable to a large country like South Africa; the question can be raised whether it is advisable to move the patients, the FDG or the camera around the country or its provinces. (author)

  14. ISS COLUMBUS laboratory experiment `GeoFlow I and II' -fluid physics research in microgravity environment to study convection phenomena inside deep Earth and mantle

    Science.gov (United States)

    Futterer, Birgit; Egbers, Christoph; Chossat, Pascal; Hollerbach, Rainer; Breuer, Doris; Feudel, Fred; Mutabazi, Innocent; Tuckerman, Laurette

    Overall driving mechanism of flow in inner Earth is convection in its gravitational buoyancy field. A lot of effort has been involved in theoretical prediction and numerical simulation of both the geodynamo, which is maintained by convection, and mantle convection, which is the main cause for plate tectonics. Especially resolution of convective patterns and heat transfer mechanisms has been in focus to reach the real, highly turbulent conditions inside Earth. To study specific phenomena experimentally different approaches has been observed, against the background of magneto-hydrodynamic but also on the pure hydrodynamic physics of fluids. With the experiment `GeoFlow' (Geophysical Flow Simulation) instability and transition of convection in spherical shells under the influence of central-symmetry buoyancy force field are traced for a wide range of rotation regimes within the limits between non-rotating and rapid rotating spheres. The special set-up of high voltage potential between inner and outer sphere and use of a dielectric fluid as working fluid induce an electro-hydrodynamic force, which is comparable to gravitational buoyancy force inside Earth. To reduce overall gravity in a laboratory this technique requires microgravity conditions. The `GeoFlow I' experiment was accomplished on International Space Station's module COLUM-BUS inside Fluid Science Laboratory FSL und supported by EADS Astrium, Friedrichshafen, User Support und Operations Centre E-USOC in Madrid, Microgravity Advanced Research and Support Centre MARS in Naples, as well as COLUMBUS Control Center COL-CC Munich. Running from August 2008 until January 2009 it delivered 100.000 images from FSL's optical diagnostics module; here more precisely the Wollaston shearing interferometry was used. Here we present the experimental alignment with numerical prediction for the non-rotating and rapid rotation case. The non-rotating case is characterized by a co-existence of several stationary supercritical

  15. DAΦNE magnet power supply system

    International Nuclear Information System (INIS)

    Ricci, R.; Sanelli, C.; Stecchi, A.

    1998-01-01

    The e + -e - , 1020 MeV at center of mass, Particle Accelerator Complex DAΦNE, consists of a linear accelerator (Linac), a damping ring (D.A.), nearly 180 m of transfer lines (T.L.) and two storage rings (S.R.), that intersect each other in two points (I.P.), for Φ particle production. The D.A., T.L. and S.R. magnets are powered by means of 462 power supplies, rating from 100 W to 1 MW. The very different output currents, from 10 A to 2300 A, and output voltages, from 8 V to 1300 V, imposed many different technical solution realized by the world industry. This paper describes the Power Supply System giving also a description of the different typologies, their characteristics and control systems. The paper reports also the power supply performances and gives information on their installation and first year operation period

  16. A Multi-agent Supply Chain Information Coordination Mode Based on Cloud Computing

    OpenAIRE

    Wuxue Jiang; Jing Zhang; Junhuai Li

    2013-01-01

     In order to improve the high efficiency and security of supply chain information coordination under cloud computing environment, this paper proposes a supply chain information coordination mode based on cloud computing. This mode has two basic statuses which are online status and offline status. At the online status, cloud computing center is responsible for coordinating the whole supply chain information. At the offline status, information exchange can be realized among different nodes by u...

  17. Implementation of an integrated pharmacy supply management strategy.

    Science.gov (United States)

    Amerine, Lindsey B; Calvert, Daniel R; Pappas, Ashley L; Lee, Sarah M; Valgus, John M; Savage, Scott W

    2017-12-15

    Implementation of an integrated pharmacy supply management strategy is described. In 2011, the formulary approval process and supply management for oncology medications were independent of each other at an oncology infusion center. Numerous nonformulary medications were kept on hand and reordered based on inventory levels that were established with inadequate usage information, while some formulary agents did not have on-hand inventory levels and had to be reordered on a patient-specific basis, which required paperwork and then a review by drug information staff per institutional policy. Because there was no true distinction in the ordering of formulary versus nonformulary oncology agents, the medical staff prescribed both in the same manner, leaving the pharmacy staff responsible for ensuring that enough quantities were on hand for many drugs, regardless of formulary status. Using supply chain management principles, a formal analysis of the on-hand inventory was performed. In addition, the formulary process for oncology drugs was restructured to align with how oncology drugs are managed for on-hand inventory levels. The alignment of these processes allowed the operation to have 1 supply strategy for the ambulatory oncology infusion center. As a result, inventory exhaustion rates were reduced by 70% and inventory turn rates improved by 78%. There was also significant time savings in the operational process streamlining, eliminating the rework and inefficiencies caused by an unclear process that was not fully captured in this assessment. Alignment of the formulary review process with inventory analyses that support supply management principles reduced inventory exhaustion while improving inventory turn rates. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  18. NASA Goddard Space Flight Center Supply Chain Management Program

    Science.gov (United States)

    Kelly, Michael P.

    2011-01-01

    This slide presentation reviews the working of the Supplier Assessment Program at NASA Goddard Space Flight Center. The program supports many GSFC projects to ensure suppliers are aware of and are following the contractual requirements, to provide an independent assessment of the suppliers' processes, and provide suppliers' safety and mission assurance organizations information to make the changes within their organization.

  19. Derivation of guidelines for uranium residual radioactive material in soil at the B ampersand T Metals Company site, Columbus, Ohio

    International Nuclear Information System (INIS)

    Kamboj, S.; Nimmagadda, Mm.; Yu, C.

    1996-01-01

    Guidelines for uranium residual radioactive material in soil were derived for the B ampersand T Metals Company site in Columbus, Ohio. This site has been identified for remedial action under the US Department of Energy's (DOE's) Formerly Utilized Sites Remedial Action Program (FUSRAP). Single-nuclide and total-uranium guidelines were derived on the basis of the requirement that following remedial action, the 50-year committed effective dose equivalent to a hypothetical individual living or working in the immediate vicinity of the site should not exceed a dose constraint of 30 mrem/yr for the current use and likely future use scenarios or a dose limit of 100 n-mrem/yr for less likely future use scenarios. The DOE residual radioactive material guideline computer code, RESRAD, was used in this evaluation. RESRAD implements the methodology described in the DOE manual for establishing residual radioactive material guidelines. Three scenarios were considered; each assumed that for a period of 1,000 years following remedial action, the site would be used without radiological restrictions. The three scenarios varied with regard to the type of site use, time spent at the site by the exposed individual, and sources of food and water consumed. The evaluations indicate that the dose constraint of 30 mrem/yr would not be exceeded for uranium (including uranium-234, uranium-235, and uranium-238) within 1,000 years, provided that the soil concentration of total uranium (uranium-234, uranium-235, and uranium-238) at the B ampersand T Metals site did not exceed 1, I 00 pCi/g for Scenario A (industrial worker, current use) or 300 pCi/g for Scenario B (resident with municipal water supply, a likely future use). The dose limit of 100 mrem/yr would not be exceeded at the site if the total uranium concentration of the soil did not exceed 880 pCi/g for Scenario C (resident with an on-site water well, a plausible but unlikely future use)

  20. Centering of quadrupole family

    International Nuclear Information System (INIS)

    Pinayev, Igor

    2007-01-01

    A procedure for finding the individual centers for a family of quadrupoles fed with a single power supply is described. The method is generalized for using the correctors adjacent to the quadrupoles. Theoretical background is presented as well as experimental data for the NSLS rings. The method accuracy is also discussed

  1. 76 FR 59162 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-National Center...

    Science.gov (United States)

    2011-09-23

    .... Specifically, Anglicotech LLC, Washington, DC; Battelle, Columbus, OH; Baxter Healthcare Corporation, Round...; ARC Technology Solutions, LLC, Nashua, NH; BAE Systems, Wayne, NJ; BCT Technology, Inc., Keene, NH...

  2. Optimization of emergy sustainability index for biodiesel supply network design

    International Nuclear Information System (INIS)

    Ren, Jingzheng; Tan, Shiyu; Yang, Le; Goodsite, Michael Evan; Pang, Chengfang; Dong, Lichun

    2015-01-01

    Highlights: • A MINLP model for designing sustainable biodiesel supply network is developed. • Emergy sustainability index is used as the objective to be maximized. • Multiple alternatives in each stage of biodiesel supply network are considered. • Life cycle perspective is incorporated in the design of biodiesel supply network. - Abstract: Sustainability is an important and difficult consideration for the stakeholders/decision-makers when planning a biofuel supply network. In this paper, a Mixed-Integer Non-linear Programming (MINLP) model was developed with the aim to help the stakeholders/decision-maker to select the most sustainable design. In the proposed model, the emergy sustainability index of the whole biodiesel supply networks in a life cycle perspective is employed as the measure of the sustainability, and multiple feedstocks, multiple transport modes, multiple regions for biodiesel production and multiple distribution centers can be considered. After describing the process and mathematic framework of the model, an illustrative case was studied and demonstrated that the proposed methodology is feasible for finding the most sustainable design and planning of biodiesel supply chains

  3. Optimization of emergy sustainability index for biodiesel supply network design

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Tan, Shiyu; Yang, Le

    2015-01-01

    sustainable design. In the proposed model, the emergy sustainability index of the whole biodiesel supply networks in a life cycle perspective is employed as the measure of the sustainability, and multiple feedstocks, multiple transport modes, multiple regions for biodiesel production and multiple distribution...... centers can be considered. After describing the process and mathematic framework of the model, an illustrative case was studied and demonstrated that the proposed methodology is feasible for finding the most sustainable design and planning of biodiesel supply chains....

  4. Defense Commissary Surcharge Collections Fund Financial Statements for FY 1992

    National Research Council Canada - National Science Library

    Young, Shelton

    1993-01-01

    .... We also evaluated DeCA's and DPAS - Columbus Center's internal control structure for controlling and reporting financial information as well as DeCA's compliance with applicable laws and regulations...

  5. Design of supply chain in fuzzy environment

    Science.gov (United States)

    Rao, Kandukuri Narayana; Subbaiah, Kambagowni Venkata; Singh, Ganja Veera Pratap

    2013-05-01

    Nowadays, customer expectations are increasing and organizations are prone to operate in an uncertain environment. Under this uncertain environment, the ultimate success of the firm depends on its ability to integrate business processes among supply chain partners. Supply chain management emphasizes cross-functional links to improve the competitive strategy of organizations. Now, companies are moving from decoupled decision processes towards more integrated design and control of their components to achieve the strategic fit. In this paper, a new approach is developed to design a multi-echelon, multi-facility, and multi-product supply chain in fuzzy environment. In fuzzy environment, mixed integer programming problem is formulated through fuzzy goal programming in strategic level with supply chain cost and volume flexibility as fuzzy goals. These fuzzy goals are aggregated using minimum operator. In tactical level, continuous review policy for controlling raw material inventories in supplier echelon and controlling finished product inventories in plant as well as distribution center echelon is considered as fuzzy goals. A non-linear programming model is formulated through fuzzy goal programming using minimum operator in the tactical level. The proposed approach is illustrated with a numerical example.

  6. Analysis of the Marine Corps Supply Management Unit’s Internal Operations and Effect on the Warfighter

    Science.gov (United States)

    2016-12-01

    centered on the Marine Corps’ forward deployed supply chain management for expeditionary logistics . He used a fictitious case study to stress the...also maintenance, maintenance management , and logistics chain management at the retail supply level and maintenance activities at all levels. (DON...11 Figure 2. United States Marine Corps Supply Management Unit Global Locations

  7. Don't break the chain: importance of supply chain management in the operating room setting.

    Science.gov (United States)

    Bilyk, Candis

    2008-09-01

    Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

  8. Robust environmental closed-loop supply chain design under uncertainty

    International Nuclear Information System (INIS)

    MA, Ruimin; YAO, Lifei; JIN, Maozhu; REN, Peiyu; LV, Zhihan

    2016-01-01

    With the fast developments in product remanufacturing to improve economic and environmental performance, an environmental closed-loop supply (ECLSC) chain is important for enterprises' competitiveness. In this paper, a robust ECLSC network is investigated which includes multiple plants, collection centers, demand zones, and products, and consists of both forward and reverse supply chains. First, a robust multi-objective mixed integer nonlinear programming model is proposed to deal with ECLSC considering two conflicting objectives simultaneously, as well as the uncertain nature of the supply chain. Cost parameters of the supply chain and demand fluctuations are subject to uncertainty. The first objective function aims to minimize the economical cost and the second objective function is to minimize the environmental influence. Then, the proposed model is solved as a single-objective mixed integer programming model applying the LP-metrics method. Finally, numerical example has been presented to test the model. The results indicate that the proposed model is applicable in practice.

  9. Barriers and facilitators to learning and performing cardiopulmonary resuscitation in neighborhoods with low bystander cardiopulmonary resuscitation prevalence and high rates of cardiac arrest in Columbus, OH.

    Science.gov (United States)

    Sasson, Comilla; Haukoos, Jason S; Bond, Cindy; Rabe, Marilyn; Colbert, Susan H; King, Renee; Sayre, Michael; Heisler, Michele

    2013-09-01

    Residents who live in neighborhoods that are primarily black, Latino, or poor are more likely to have an out-of-hospital cardiac arrest, less likely to receive cardiopulmonary resuscitation (CPR), and less likely to survive. No prior studies have been conducted to understand the contributing factors that may decrease the likelihood of residents learning and performing CPR in these neighborhoods. The goal of this study was to identify barriers and facilitators to learning and performing CPR in 3 low-income, high-risk, and predominantly black neighborhoods in Columbus, OH. Community-Based Participatory Research approaches were used to develop and conduct 6 focus groups in conjunction with community partners in 3 target high-risk neighborhoods in Columbus, OH, in January to February 2011. Snowball and purposeful sampling, done by community liaisons, was used to recruit participants. Three reviewers analyzed the data in an iterative process to identify recurrent and unifying themes. Three major barriers to learning CPR were identified and included financial, informational, and motivational factors. Four major barriers were identified for performing CPR and included fear of legal consequences, emotional issues, knowledge, and situational concerns. Participants suggested that family/self-preservation, emotional, and economic factors may serve as potential facilitators in increasing the provision of bystander CPR. The financial cost of CPR training, lack of information, and the fear of risking one's own life must be addressed when designing a community-based CPR educational program. Using data from the community can facilitate improved design and implementation of CPR programs.

  10. Barriers and Facilitators to Learning and Performing Cardiopulmonary Resuscitation (CPR) in Neighborhoods with Low Bystander CPR Prevalence and High Rates of Cardiac Arrest in Columbus, Ohio

    Science.gov (United States)

    Sasson, Comilla; Haukoos, Jason S.; Bond, Cindy; Rabe, Marilyn; Colbert, Susan H.; King, Renee; Sayre, Michael; Heisler, Michele

    2013-01-01

    Background Residents who live in neighborhoods that are primarily African-American, Latino, or poor are more likely to have an out-of-hospital cardiac arrest (OHCA), less likely to receive cardiopulmonary resuscitation (CPR), and less likely to survive. No prior studies have been conducted to understand the contributing factors that may decrease the likelihood of residents learning and performing CPR in these neighborhoods. The goal of this study was to identify barriers and facilitators to learning and performing CPR in three low-income, “high-risk” predominantly African American, neighborhoods in Columbus, Ohio. Methods and Results Community-Based Participatory Research (CBPR) approaches were used to develop and conduct six focus groups in conjunction with community partners in three target high-risk neighborhoods in Columbus, Ohio in January-February 2011. Snowball and purposeful sampling, done by community liaisons, was used to recruit participants. Three reviewers analyzed the data in an iterative process to identify recurrent and unifying themes. Three major barriers to learning CPR were identified and included financial, informational, and motivational factors. Four major barriers were identified for performing CPR and included fear of legal consequences, emotional issues, knowledge, and situational concerns. Participants suggested that family/self-preservation, emotional, and economic factors may serve as potential facilitators in increasing the provision of bystander CPR. Conclusion The financial cost of CPR training, lack of information, and the fear of risking one's own life must be addressed when designing a community-based CPR educational program. Using data from the community can facilitate improved design and implementation of CPR programs. PMID:24021699

  11. Supply and Demand for Child Care Services in Turkey : A Mixed Methods Study

    OpenAIRE

    World Bank

    2015-01-01

    Despite increases in availability of center based child care and preschool services in Turkey over the last decade, both the supply of services and utilization remain low. There are regional disparities in availability and the majority of children and households remain unserved in terms of child care and preschool services. This report has collected and assessed information on the supply a...

  12. Response of reservoir atrazine concentrations following regulatory and management changes

    Science.gov (United States)

    Since the early 1990s, atrazine concentrations in United States drinking water supplies exceeding the drinking water standard of 3 parts per billion (ppb) have been identified as a costly and major water quality concern. Atrazine levels in Columbus, Ohio tap water reached 8.74 ppb in the early 1990s...

  13. Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Das, Sujit [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Warren, Josh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); West, Devin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schexnayder, Susan M. [Univ. of Tennessee, Knoxville, TN (United States)

    2016-05-01

    This study identifies key opportunities in the carbon fiber supply chain where the United States Department of Energy's Office of Energy Efficiency and Renewable Energy resources and investments can help the United States achieve or maintain a competitive advantage. The report focuses on four application areas--wind energy, aerospace, automotive, and pressure vessels--that top the list of industries using carbon fiber and carbon fiber reinforced polymers and are also particularly relevant to EERE's mission. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components, all contributing to a competitiveness assessment that addresses the United States' role in future industry growth. This report was prepared by researchers at Oak Ridge National Laboratory and the University of Tennessee for the Clean Energy Manufacturing Analysis Center.

  14. Developing a Comprehensive Approach Could Help DOD Better Manage National Security Risks in the Supply Chain

    Science.gov (United States)

    2016-02-01

    supply chains for rare earths.20 According to Industrial Analysis Center officials, only 10 percent of surveys sent to prime contractors for 79...the Supply Chain Report to Congressional Committees February 2016 GAO-16-161 United States Government Accountability Office United...Developing a Comprehensive Approach Could Help DOD Better Manage National Security Risks in the Supply Chain Why GAO Did This Study DOD depends on

  15. Supply Inventory Management: Industrial Prime Vendor Program at the Air Force Air Logistics Centers

    National Research Council Canada - National Science Library

    2002-01-01

    ... in maintenance, repair, and overhaul facilities. The IPV Program is a customer-oriented, supply-chain management initiative that transfers complete responsibility for bench-stock material to a third-party vendor...

  16. Pulsed power supplies for laser flashlamps. Final report

    International Nuclear Information System (INIS)

    Bird, W.L. Jr.; Driga, M.D.; Mayhall, D.J.T.; Brennan, M.

    1978-10-01

    A preliminary engineering design of a compensated pulse alternator for driving laser flashlamps is presented. The work performed by the Center for Electromechanics at The University of Texas at Austin also includes the optimization and revision of the prototype design for a compensated pulse alternator power supply for the NOVA laser system at Lawrence Livermore Laboratory

  17. Summary of the function and the safety design of the Tokai Reprocessing Utility Center

    International Nuclear Information System (INIS)

    Yanai, Chisato; Yamazaki, Toshihiko; Tomita, Tsuneo; Horii, Shinichi; Uryu, Mituru; Ishiguro, Nobuharu; Kobayashi, Kentarou

    1998-01-01

    The Tokai Reprocessing Utility Center is a new facility to replace the utilities to the Tokai Reprocessing Plant such as the emergency power supply, compressed air, etc. which are scattered about the site and have became superannuated. The Facility building has a base-isolation system that is a strongly resistant to earthquake. After completion, the center will supply utilities to the Main Plant, the Central Building, the Auxiliary Active Facility, etc. of the Tokai Reprocessing Plant. This document outlines the function and the safety design of the Tokai Reprocessing Utility Center. (author)

  18. Competition in communal power supply. Wettbewerb in der kommunalen Stromversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Bolle, F [Lehrstuhl fuer Volkswirtschaftstheorie (Mikrooekonomie), Frankfurt/Oder (Germany)

    1993-06-01

    In the eighties, a broad discussion about possible increases of efficiencies in public supply (and in other regulated areas) has started under the slogan ''deregulation''. The use of the term deregulation is not uniform. In the discussions of the past years, however, it turned out more and more that the literal significance (reduction of the regulation density) is less the center of interest than rather the creation of a new regulatory frame which allows to establish markets in spaces free of competition. From ''need'' to ''supply'' one passes over to ''demand'' and ''offer''. Deregulation in local electric power supply means correspondingly: How can the consumer prices for electricity be determined through competitive processes instead of a cost regulation In the following, fundamental problems are mentioned. (orig./UA)

  19. Outline of energy (electricity) supply and demand outlook in Asian APEC countries

    International Nuclear Information System (INIS)

    Fujime, Kazuya

    1995-01-01

    Oil: Japan's oil demand is projected to be on a gradual decline in the future due to implementation of policy measures aimed at achieving that objective, while consumption of oil in three areas - China, NIES and six ASEAN countries -- is projected to increase to reach a level nearly three times as large as Japan's demand by 2010. Supply of oil in the region is projected to level off, making it necessary for the region to increase its reliance on other areas for additional volumes of oil supply. Coal: Demand for coal is projected to grow against a background of expansion of coal-fired power generation. Coal demand in China, in particular, is projected to grow to such an extent that China may become a net coal importer, thus having a great impact on coal supply and demand in Asian countries. Natural gas: Demand for natural gas is projected to grow in the region, centering on NIES and ASEAN countries. Although production in ASEAN countries is expected to increase, the region is anticipated to increase its reliance on other areas for natural gas supply from medium - and long term perspectives. Oil products: Demand for oil products is projected to grow due to stepped-up industrialization and motorization in China, NIES and ASEAN countries. From medium - and long-term perspectives, considerable volumes of additional oil product supply will become necessary, unless large-scale refineries are newly built or expanded within the region centering on China. (author)

  20. Defense Hotline Allegation on the Defense Commissary Agency Statement of Accountability

    National Research Council Canada - National Science Library

    Lane, F

    1999-01-01

    ..., and to assess the adequacy of DFAS Columbus Center internal controls for correcting deposit differences between the SF 1219 and the "302 Data Element Management/Accounting Report" generated by the Standard Finance System...

  1. DOSIS & DOSIS 3D: radiation measurements with the DOSTEL instruments onboard the Columbus Laboratory of the ISS in the years 2009-2016

    Science.gov (United States)

    Berger, Thomas; Burmeister, Sönke; Matthiä, Daniel; Przybyla, Bartos; Reitz, Günther; Bilski, Pawel; Hajek, Michael; Sihver, Lembit; Szabo, Julianna; Ambrozova, Iva; Vanhavere, Filip; Gaza, Ramona; Semones, Edward; Yukihara, Eduardo G.; Benton, Eric R.; Uchihori, Yukio; Kodaira, Satoshi; Kitamura, Hisashi; Boehme, Matthias

    2017-03-01

    The natural radiation environment in Low Earth Orbit (LEO) differs significantly in composition and energy from that found on Earth. The space radiation field consists of high energetic protons and heavier ions from Galactic Cosmic Radiation (GCR), as well as of protons and electrons trapped in the Earth's radiation belts (Van Allen belts). Protons and some heavier particles ejected in occasional Solar Particle Events (SPEs) might in addition contribute to the radiation exposure in LEO. All sources of radiation are modulated by the solar cycle. During solar maximum conditions SPEs occur more frequently with higher particle intensities. Since the radiation exposure in LEO exceeds exposure limits for radiation workers on Earth, the radiation exposure in space has been recognized as a main health concern for humans in space missions from the beginning of the space age on. Monitoring of the radiation environment is therefore an inevitable task in human spaceflight. Since mission profiles are always different and each spacecraft provides different shielding distributions, modifying the radiation environment measurements needs to be done for each mission. The experiments "Dose Distribution within the ISS (DOSIS)" (2009-2011) and "Dose Distribution within the ISS 3D (DOSIS 3D)" (2012-onwards) onboard the Columbus Laboratory of the International Space Station (ISS) use a detector suite consisting of two silicon detector telescopes (DOSimetry TELescope = DOSTEL) and passive radiation detector packages (PDP) and are designed for the determination of the temporal and spatial variation of the radiation environment. With the DOSTEL instruments' changes of the radiation composition and the related exposure levels in dependence of the solar cycle, the altitude of the ISS and the influence of attitude changes of the ISS during Space Shuttle dockings inside the Columbus Laboratory have been monitored. The absorbed doses measured at the end of May 2016 reached up to 286

  2. Temperature and salinity profiles from CTD casts from the SE Pacific (limit-140 W) from the COLUMBUS ISELIN and other platforms as part of the International Decade of Ocean Exploration / Coastal Upwelling Ecosystems Analysis (IDOE/CUEA) from 1977-03-17 to 1977-03-30 (NODC Accession 7900205)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profiles were collected from CTD casts in the SE Pacific (limit 140 W) from the COLUMBUS ISELIN and other platforms from 17 March 1977 to 30...

  3. Indirect Potable Reuse: A Sustainable Water Supply Alternative

    Directory of Open Access Journals (Sweden)

    Clemencia Rodriguez

    2009-03-01

    Full Text Available The growing scarcity of potable water supplies is among the most important issues facing many cities, in particular those using single sources of water that are climate dependent. Consequently, urban centers are looking to alternative sources of water supply that can supplement variable rainfall and meet the demands of population growth. A diversified portfolio of water sources is required to ensure public health, as well as social, economical and environmental sustainability. One of the options considered is the augmentation of drinking water supplies with advanced treated recycled water. This paper aims to provide a state of the art review of water recycling for drinking purposes with emphasis on membrane treatment processes. An overview of significant indirect potable reuse projects is presented followed by a description of the epidemiological and toxicological studies evaluating any potential human health impacts. Finally, a summary of key operational measures to protect human health and the areas that require further research are discussed.

  4. Indirect Potable Reuse: A Sustainable Water Supply Alternative

    Science.gov (United States)

    Rodriguez, Clemencia; Van Buynder, Paul; Lugg, Richard; Blair, Palenque; Devine, Brian; Cook, Angus; Weinstein, Philip

    2009-01-01

    The growing scarcity of potable water supplies is among the most important issues facing many cities, in particular those using single sources of water that are climate dependent. Consequently, urban centers are looking to alternative sources of water supply that can supplement variable rainfall and meet the demands of population growth. A diversified portfolio of water sources is required to ensure public health, as well as social, economical and environmental sustainability. One of the options considered is the augmentation of drinking water supplies with advanced treated recycled water. This paper aims to provide a state of the art review of water recycling for drinking purposes with emphasis on membrane treatment processes. An overview of significant indirect potable reuse projects is presented followed by a description of the epidemiological and toxicological studies evaluating any potential human health impacts. Finally, a summary of key operational measures to protect human health and the areas that require further research are discussed. PMID:19440440

  5. 42 CFR 405.2452 - Services and supplies incident to clinical psychologist and clinical social worker services.

    Science.gov (United States)

    2010-10-01

    ... psychologist and clinical social worker services. 405.2452 Section 405.2452 Public Health CENTERS FOR MEDICARE... clinical social worker services. (a) Services and supplies incident to a clinical psychologist's or clinical social worker's services are reimbursable under this subpart if the service or supply is— (1) Of a...

  6. 2006 Land and Maritime Supply Chains Business Conference and Exhibition

    Science.gov (United States)

    2006-08-30

    Clifford G. Scott, SC, USN, Unit Chief, Electronics Division Ms. Arretta Griffi th, Procurement Support Assistant (OA) Ms. Shelly Jenkins, Customer Account...Business Systems Modernization............715 DLA - Casting and Forging.................................712 DLA - Defense Distribution Center (DDC...219 Kovatch Castings , Inc.....................................409 Lambda Supply Corp......................................103 Lockheed

  7. Lead isotopes in tap water: implications for Pb sources within a municipal water supply system

    International Nuclear Information System (INIS)

    Cheng Zhongqi; Foland, Kenneth A.

    2005-01-01

    Residential tap waters were investigated to examine the feasibility of using isotopic ratios to identify dominant sources of water Pb in the Columbus (Ohio, USA) municipal supply system. Overall, both the concentrations, which are generally low (0.1-28 μg/L), and isotopic compositions of tap water Pb show wide variations. This contrasts with the situation for a limited number of available service lines, which exhibit only a limited Pb-isotope variation but contain Pb of two very different types with one significantly more radiogenic than the other. Most tap water samples in contact with Pb service lines have Pb-isotope ratios that are different from the pipe Pb. Furthermore, the Pb isotope compositions of sequentially drawn samples in the same residence generally are similar, but those from separate residences are different, implying dominant Pb sources from domestic plumbing. A separate pilot study at two residences without Pb service lines shows isotopic similarity between water and solders in each house, further suggesting that the major Pb sources are domestic in these cases and dominated by Pb from solder joints. Although complicated by the broad range of overall Pb-isotope variations observed and limited by sample availability, the results suggest that Pb isotopes can be used effectively to constrain the sources of Pb in tap waters, especially for individual houses where multiple source candidates can be identified

  8. Toward a methodology for substate projections of registered nurse supply and demand in New York.

    Science.gov (United States)

    McGinnis, Sandra; Martiniano, Robert; Moore, Jean

    2010-01-01

    Even as concerns about nursing shortages continue nationwide and for individual states in the United States, there is little information on the impact of nursing shortages at substate levels, such as counties or groups of small counties. National and state level assessments can mask wide geographic variation in the distribution of registered nurses (RNs). The Center for Health Workforce Studies at the School of Public Health, University at Albany, developed a practical approach to projecting RN supply and demand at substate levels. The experimental model used in this research was adapted from a methodology utilized for the RN National Supply Model and National Demand Model developed by the Health Resources and Services Administration in the department of Health and Human Services to make RN supply and demand projections at the broader national and state levels. The Center's research highlighted the value of substate analyses in the identification of RN supply and demand gaps and found that supply and demand gaps vary greatly by region and within regions. This study also provided an in-depth understanding of the dynamics that drive substate labor markets for RNs as well as the need for substate analyses to help policymakers better allocate scarce resources to address nursing shortages.

  9. A Study of Fuel Supplies for Emergency Power Generation at Air Logistics Centers.

    Science.gov (United States)

    1980-06-01

    md Grade PositIon Ogan~zatro IA-aT;; till al IN 0u two Pwuaay POrN POVAfT uga $300 -M HAM I BUSINESS REPLY MAIL I _____ FINN7 MAINli MIN. NII n...34nearly all U.S. military installations met their energy need through procurement from off- site commercial supplies [8:12].". This being the case, military

  10. Toward sustainable data centers: a comprehensive energy management strategy

    OpenAIRE

    Guitart Fernández, Jordi

    2016-01-01

    Data centers are major contributors to the emission of carbon dioxide to the atmosphere, and this contribution is expected to increase in the following years. This has encouraged the development of techniques to reduce the energy consumption and the environmental footprint of data centers. Whereas some of these techniques have succeeded to reduce the energy consumption of the hardware equipment of data centers (including IT, cooling, and power supply systems), we claim that sustainable data c...

  11. Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from Surface underway observations using Barometric pressure sensor, Carbon dioxide (CO2) gas analyzer and other instruments from COLUMBUS WAIKATO in the Bass Strait, North Pacific Ocean and others from 2004-03-03 to 2006-01-15 (NODC Accession 0080979)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0080979 includes Surface underway, chemical, meteorological and physical data collected from COLUMBUS WAIKATO in the Bass Strait, North Pacific Ocean,...

  12. Effects of oxygen supply on the biodegradation rate in oil hydrocarbons contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Zawierucha, I [Institute of Chemistry and Environment Protection, Jan Dlugosz University of Czestochowa, Waszyngtona 4/8, 42-200 Czestochowa (Poland); Malina, G, E-mail: iwona_zawierucha@o2.pl [Faculty of Hydrogeology and Geology Engineering, Department of Geology, Geophysics and Environment Protection, AGH University of Science and Technology, Mickiewicza 30, 30-059 Cracow (Poland)

    2011-04-01

    Respirometry studies using the 10-chamber Micro-Oxymax respirometer (Columbus, Ohio) were conducted to determine the effect of biostimulation (by diverse ways of O{sub 2} supply) on enhancing biodegradation in soils contaminated with oil hydrocarbons. Soil was collected from a former military airport in Kluczewo, Poland. Oxygen was supplied by means of aerated water, aqueous solutions of H{sub 2}O{sub 2} and KMnO{sub 4}. The biodegradation was evaluated on the basis of O{sub 2} uptake and CO{sub 2} production. The O{sub 2} consumption and CO{sub 2} production rates during hydrocarbons biodegradation were estimated from the slopes of cumulative curve linear regressions. The pertinent intrinsic and enhanced biodegradation rates were calculated on the basis of mass balance equation and O{sub 2} uptake and CO{sub 2} production rates. The biodegradation rates of 5-7 times higher as compared to a control were observed when the aqueous solution of KMnO{sub 4} in concentration of 20 g L{sup -1} was applied. Permanganate is known to readily oxidize alkene carbon - carbon double bonds; so it can be successfully applied in remediation technology for soils contaminated with oil hydrocarbons. While hydrocarbons are not completely mineralized by permanganate oxidation reactions, their structure is altered by polar functional groups providing vast improvements in aqueous solubility and availability for biodegradation. The 3% aqueous solution of H{sub 2}O{sub 2} caused significant improvement of the biodegradation rates as compared to a control (on average about 260%). Aerobic biodegradation of hydrocarbons can benefit from the presence of oxygen released during H{sub 2}O{sub 2} decomposition. Adding of aerated water resulted in an increase of biodegradation rates (about 114 - 229%) as compared to a control. The aerated water can both be the source of oxygen for microorganisms and determine the transport of substrate to bacteria cells.

  13. A Comprehensive Mathematical Programming Model for Minimizing Costs in A Multiple-Item Reverse Supply Chain with Sensitivity Analysis

    Directory of Open Access Journals (Sweden)

    Mahmoudi Hoda

    2014-09-01

    Full Text Available These instructions give you guidelines for preparing papers for IFAC conferences. A reverse supply chain is configured by a sequence of elements forming a continuous process to treat return-products until they are properly recovered or disposed. The activities in a reverse supply chain include collection, cleaning, disassembly, test and sorting, storage, transport, and recovery operations. This paper presents a mathematical programming model with the objective of minimizing the total costs of reverse supply chain including transportation, fixed opening, operation, maintenance and remanufacturing costs of centers. The proposed model considers the design of a multi-layer, multi-product reverse supply chain that consists of returning, disassembly, processing, recycling, remanufacturing, materials and distribution centers. This integer linear programming model is solved by using Lingo 9 software and the results are reported. Finally, a sensitivity analysis of the proposed model is also presented.

  14. Klystron switching power supplies for the Internation Linear Collider

    Energy Technology Data Exchange (ETDEWEB)

    Fraioli, Andrea; /Cassino U. /INFN, Pisa

    2009-12-01

    The International Linear Collider is a majestic High Energy Physics particle accelerator that will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. ILC will complement the Large Hadron Collider (LHC), a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, by producing electron-positron collisions at center of mass energy of about 500 GeV. In particular, the subject of this dissertation is the R&D for a solid state Marx Modulator and relative switching power supply for the International Linear Collider Main LINAC Radio Frequency stations.

  15. COLUMBUS. A global gas market model

    Energy Technology Data Exchange (ETDEWEB)

    Hecking, Harald; Panke, Timo

    2012-03-15

    A model of the global gas market is presented which in its basic version optimises the future development of production, transport and storage capacities as well as the actual gas flows around the world assuming perfect competition. Besides the transport of natural gas via pipelines also the global market for liquefied natural gas (LNG) is modelled using a hub-and-spoke approach. While in the basic version of the model an inelastic demand and a piecewise-linear supply function are used, both can be changed easily, e.g. to a Golombek style production function or a constant elasticity of substitution (CES) demand function. Due to the usage of mixed complementary programming (MCP) the model additionally allows for the simulation of strategic behaviour of different players in the gas market, e.g. the gas producers.

  16. When Enrollments Bulge but Budgets Don't, Consider "Satellite Learning Centers."

    Science.gov (United States)

    Reecer, Marcia

    1988-01-01

    Describes Dade County (Florida) schools' answer to crowded classrooms and burgeoning primary enrollments: satellite learning centers built and maintained by local companies as employee childcare benefits. Each center is attached to a nearby "host" school that disburses funds, keeps student records, and supplies support services. (MLH)

  17. Global public health impact of recovered supplies from operating rooms: a critical analysis with national implications.

    Science.gov (United States)

    Wan, Eric L; Xie, Li; Barrett, Miceile; Baltodano, Pablo A; Rivadeneira, Andres F; Noboa, Jonathan; Silver, Maya; Zhou, Richard; Cho, Suzy; Tam, Tammie; Yurter, Alp; Gentry, Carol; Palacios, Jorge; Rosson, Gedge D; Redett, Richard J

    2015-01-01

    In modern operating rooms, clean and unused medical supplies are routinely discarded and can be effectively recovered and redistributed abroad to alleviate the environmental burden of donor hospitals and to generate substantial health benefits at resource-poor recipient institutions. We established a recovery and donation program to collect clean and unused supplies for healthcare institutions in developing nations. We analyzed items donated over a 3-year period (September 2010-November 2013) by quantity and weight, and estimated the projected value of the program under potential nationwide participation. To capture the health benefits attributable to the donated supplies at recipient institutions, we partnered with two tertiary-care centers in Guayaquil, Ecuador and conducted a pilot study on the utility of the donated supplies at the recipient institutions (October 2013). We determined the disability-adjusted life years (DALY) averted for all patients undergoing procedures involving donated items and estimated the annual attributable DALY as well as the cost per DALY averted both by supply and by procedure. Approximately, 2 million lbs (907,185 kg) per year of medical supplies are recoverable from large non-rural US academic medical centers. Of these supplies, 19 common categories represent a potential for donation worth US $15 million per year, at a cost-utility of US $2.14 per DALY averted. Hospital operating rooms continue to represent a large source of recoverable surgical supplies that have demonstrable health benefits in the recipient communities. Cost-effective recovery and need-based donation programs can significantly alleviate the global burden of surgical diseases.

  18. DOSIS & DOSIS 3D: radiation measurements with the DOSTEL instruments onboard the Columbus Laboratory of the ISS in the years 2009–2016

    Directory of Open Access Journals (Sweden)

    Berger Thomas

    2017-01-01

    Full Text Available The natural radiation environment in Low Earth Orbit (LEO differs significantly in composition and energy from that found on Earth. The space radiation field consists of high energetic protons and heavier ions from Galactic Cosmic Radiation (GCR, as well as of protons and electrons trapped in the Earth’s radiation belts (Van Allen belts. Protons and some heavier particles ejected in occasional Solar Particle Events (SPEs might in addition contribute to the radiation exposure in LEO. All sources of radiation are modulated by the solar cycle. During solar maximum conditions SPEs occur more frequently with higher particle intensities. Since the radiation exposure in LEO exceeds exposure limits for radiation workers on Earth, the radiation exposure in space has been recognized as a main health concern for humans in space missions from the beginning of the space age on. Monitoring of the radiation environment is therefore an inevitable task in human spaceflight. Since mission profiles are always different and each spacecraft provides different shielding distributions, modifying the radiation environment measurements needs to be done for each mission. The experiments “Dose Distribution within the ISS (DOSIS” (2009–2011 and “Dose Distribution within the ISS 3D (DOSIS 3D” (2012–onwards onboard the Columbus Laboratory of the International Space Station (ISS use a detector suite consisting of two silicon detector telescopes (DOSimetry TELescope = DOSTEL and passive radiation detector packages (PDP and are designed for the determination of the temporal and spatial variation of the radiation environment. With the DOSTEL instruments’ changes of the radiation composition and the related exposure levels in dependence of the solar cycle, the altitude of the ISS and the influence of attitude changes of the ISS during Space Shuttle dockings inside the Columbus Laboratory have been monitored. The absorbed doses measured at the end of May 2016

  19. Pulsed power supply for Nova Upgrade

    International Nuclear Information System (INIS)

    Bacon, J.L.; Kajs, J.P.; Walls, A.; Weldon, W.F.; Zowarka, R.C.

    1992-01-01

    This report describes work carried out at the Center for Electromechanics at The University of Texas at Austin (CEM-UT). A baseline design of the Nova Upgrade has been completed by Lawrence Livermore National Laboratory. The Nova Upgrade is an 18 beamline Nd: glass laser design utilizing fully relayed 4x4 30 cm aperture segmented optical components. The laser thus consists of 288 independent beamlets nominally producing 1.5 to 2.0 MJ of 0.35 μm light in a 3 to 5 ns pulse. The laser design is extremely flexible and will allow a wide range of pulses to irradiate ICF targets. This facility will demonstrate ignition/gain and the scientific feasibility of ICF for energy and defense applications. The pulsed power requirements for the Nova Upgrade are given. CEM-UT was contracted to study and develop a design for a homopolar generator/inductor (HPG/inductor) opening switch system which would satisfy the pulsed power supply requirements of the Nova Upgrade. The Nd:glass laser amplifiers used in the Nova Upgrade will be powered by light from xenon flashlamps. The pulsed power supply for the Nova Upgrade powers the xenon flashlamps. This design and study was for a power supply to drive flashlamps

  20. CCR Interns | Center for Cancer Research

    Science.gov (United States)

    The Cancer Research Interns (CRI) Summer Program was inaugurated in 2004 to provide an open door for students looking for an initial training opportunity. The goal is to enhance diversity within the CCR (Center for Cancer Research) training program and we have placed 338 students from 2004 to 2017, in labs and branches across the division.  The CCR and the Center for Cancer Training’s Office of Training and Education provide stipend support, some Service & Supply funds, and travel support for those students who meet the financial eligibility criteria (

  1. Decision-Making for Supply Chain Integration Supply Chain Integration

    CERN Document Server

    Lettice, Fiona; Durowoju, Olatunde

    2012-01-01

    Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

  2. Validation and Training at the Erasmus-USOC Using Payload Simulators

    Science.gov (United States)

    Cornelissen, F.; Wormgoor, P.

    2008-08-01

    With the launch of Columbus this year, Europeans will have for the first time their own scientific lab in orbit, making it possible to actually start the real exploitation of the scientific lab. Since Columbus is build with a European effort, the scientific return of the Columbus exploitation has been organized in a combined European collaboration as well. Many research stations located in nearly all corners of Europe will benefit from the capability to perform scientific experiments in microgravity aboard the pressurized research module. This is the direct result of the geographically dispersion of the responsibility for gaining scientific benefits. The monitoring and control of Columbus and its payloads in the different operations centers throughout Europe is bound technically in the so-called Columbus Decentralized Monitoring and Control System (CD- MCS). With a growing set of (scientific) capabilities onboard the International Space Station whilst having a stable crew-size onboard, the crew-time per payload is diminishing. However, being able to perform scientific monitoring from the ground segment will secure and optimize the scientific return. This requires proper training of operators on ground as well as the validation of scientific operations controlled from ground. After all, erroneous operations will negatively impact scientific return, even more with limited flight crew time. Both training and validation benefit greatly from the use of simulation. In this paper we will put forward that the use of modular simulators has been of great benefit in supporting the Erasmus-USOC in the exploitation of the European Drawer Rack (EDR) and the European Technology Exposure Facility (EuTEF) of the Columbus science lab.

  3. A multipurpose radiation service center

    International Nuclear Information System (INIS)

    Hofmann, E.-G.

    1977-01-01

    In Germany, AEG-Telefunken has been working as a supplier of irradiation equipment for more than ten years. There is a close cooperation with Radiation Dynamics Inc., Westbury, N.Y. Radiation sources are available for most industrial applications. As a special service AEG is establishing a multipurpose radiation service center in Hamburg-Wedel, Germany. This center will be used by a host of companies to investigate the effects of radiation on a broad range of materials, to develop special processing equipment, to process customer supplied products and to perform R and D work and contracts. Initially this service center will be equipped with one research type High-Power X-ray Unit (200 kV/32 mA) and one industrial type Dynamitron accelerator (1500 kV/37.5 kW). (author)

  4. Karlsruhe nuclear research center. Main activities

    International Nuclear Information System (INIS)

    The article reports on problems of securing the fuel supply for nuclear power generation, on reprocessing and ultimate storage of radioactive material, on the safety of nuclear facilities, on new technologies and basic research, and on the infrastructure of the Karlsruhe nuclear research center, as well as finance and administration. (HK) [de

  5. Joint Logistics Systems Center Reporting of Systems Development Costs

    National Research Council Canada - National Science Library

    1998-01-01

    ...." The Joint Logistics Systems Center (JLSC) was organized in FY 1992 to accomplish Corporate Information Management goals for the depot maintenance and supply management business areas of the DoD Working Capital Funds...

  6. Pengembangan Model Optimasi Desain Rantai Pasok dengan Mempertimbangkan Biaya Distribusi pada Distribution Center

    OpenAIRE

    Puspita, Dinar Enggar; Arvianto, Ary

    2015-01-01

    It is known from the previous research that integrating product architecture decisions with manufacturing and supply chain decisions during the early stage of the product development can lead to an optimum supply chain configuration. In this paper, a multi-objective optimization framework is presented for matching product architecture strategy to supply chain design. In contrast to the existing research, distribution costs from different distribution centers are incorporated into the model to...

  7. Port supply chain integration : analyzing biofuel supply chains

    NARCIS (Netherlands)

    Stevens, Leonie C. E.; Vis, Iris F. A.

    2016-01-01

    This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role,

  8. The DOSIS -Experiment onboard the Columbus Laboratory of the International Space Station -Overview and first mission results

    Science.gov (United States)

    Reitz, Guenther; Berger, Thomas; Kürner, Christine; Burmeister, Sünke; Hajek, Michael; Bilski, Pawel; Horwacik, Tomasz; Vanhavere, Filip; Spurny, Frantisek; Jadrnickova, Iva; Pálfalvi, József K.; O'Sullivan, Denis; Yasuda, Nakahiro; Uchihori, Yukio; Kitamura, Hisashi; Kodaira, Satoshi; Yukihara, Eduardo; Benton, Eric; Zapp, Neal; Gaza, Ramona; Zhou, Dazhuang; Semones, Edward; Roed, Yvonne; Boehme, Matthias; Haumann, Lutz

    Besides the effects of the microgravity environment, and the psychological and psychosocial problems encountered in confined spaces, radiation is the main health detriment for long dura-tion human space missions. The radiation environment encountered in space differs in nature from that on earth, consisting mostly of high energetic ions from protons up to iron, resulting in radiation levels far exceeding the ones encountered on earth for occupational radiation workers. Accurate knowledge of the physical characteristics of the space radiation field in dependence on the solar activity, the orbital parameters and the different shielding configurations of the International Space Station ISS is therefore needed. The DOSIS (Dose Distribution inside the ISS) experiment, under the project and science lead of DLR, aims for the spatial and tempo-ral measurement of the radiation field parameters inside the European Columbus laboratory onboard the International Space Station. This goal is achieved by applying a combination of passive (Thermo-and Optical luminescence detectors and Nuclear track etch detectors) and active (silicon telescope) radiation detectors. The passive radiation detectors -so called pas-sive detector packages (PDP) are mounted at eleven positions within the Columbus laboratory -aiming for a spatial dose distribution measurement of the absorbed dose, the linear energy transfer spectra and the dose equivalent with an average exposure time of six months. Two active silicon telescopes -so called Dosimetry Telescopes (DOSTEL 1 and DOSTEL 2) together with a Data and Power Unit (DDPU) are mounted within the DOSIS Main Box at a fixed loca-tion beneath the European Physiology Module (EPM) rack. The DOSTEL 1 and DOSTEL 2 detectors are positioned at a 90 angle to each other for a precise measurement of the temporal and spatial variation of the radiation field, especially during crossing of the South Atlantic Anomaly (SAA). The DOSIS hardware was launched with the

  9. Variations in the Flow Approach to CFCLP-TC for Multiobjective Supply Chain Design

    Directory of Open Access Journals (Sweden)

    Minor P. Hertwin

    2014-01-01

    Full Text Available We review the problem for the design of supply chains called Capacitated Fixed Cost Facility Location Problem with Transportation Choices (CFCLP-TC. The problem is based on a production network of two echelons with multiple plants, a set of potential distribution centers, and customers. The problem is formulated as an optimization model with two objective functions based on time and cost. This paper proposes three changes to the original model to compare the sets of efficient solutions and the computational time required to obtain them. The main contribution of this paper is to extend the existing literature by incorporating approaches for the supply of product to customers through multiple sources, the direct flow between plants and customers, without this necessarily implying removing the distribution centers, and the product flow between distribution centers. From these approaches, we generate mathematical programming models and propose to solve through the epsilon-constraint approach for generating Pareto fronts and thus compare each of these approaches with the original model. The models are implemented in GAMS and solved with CPLEX.

  10. Designing a Supply Chain Management Academic Curriculum Using QFD and Benchmarking

    Science.gov (United States)

    Gonzalez, Marvin E.; Quesada, Gioconda; Gourdin, Kent; Hartley, Mark

    2008-01-01

    Purpose: The purpose of this paper is to utilize quality function deployment (QFD), Benchmarking analyses and other innovative quality tools to develop a new customer-centered undergraduate curriculum in supply chain management (SCM). Design/methodology/approach: The researchers used potential employers as the source for data collection. Then,…

  11. The influence of TIG-Arc physical characteristics on the penetration and weld width under different Ar and He supply conditions

    Science.gov (United States)

    Dai, Hongbin; Shen, Xiuqiang; Wang, Haoran

    2018-06-01

    In the paper, the 5A03 aluminium alloy was employed to study the influence of TIG arc on the penetration and the weld width. And the split anode method with water-cooled copper plate was used to measure and record the distribution of arc current, under different flow ratio of argon and helium conditions. And a gas supply device controlled by a solenoid valve was employed to obtain the stable TIG welding arc of gas supply alternately at the frequency of 1 Hz and 4 Hz, and then collected the phenomenon of arc alternate by the high-speed camera. The experimental results indicated that the current density at the arc anode center of argon and helium supply alternately with different mixing ratio is lower than that of the pure argon-arc center. Nonetheless, the former is more uniform in current density within 2 mm from the arc center. Furthermore, it presented as a component arc of argon-arc and helium-arc switched, with the condition of argon and helium supply alternately at a frequency of 1 Hz and the arc power density is greater and concentrated, leading to the wider and deeper weld.

  12. HIV/AIDS related commodities supply chain management in public health facilities of Addis Ababa, Ethiopia: a cross-sectional survey.

    Science.gov (United States)

    Berhanemeskel, Eyerusalem; Beedemariam, Gebremedhin; Fenta, Teferi Gedif

    2016-01-01

    A wide range of pharmaceutical products are needed for diagnosis, treatment, and prevention of HIV/AIDS. However, interrupted supplies and stock-outs are the major challenges in the supply chain of ARV medicines and related commodities. The aim of this study was to assess the supply chain management of HIV/AIDS related commodities in public health facilities of Addis Ababa, Ethiopia. A descriptive cross-sectional survey complemented by qualitative method was conducted in 24 public health facilities (4 hospitals and 20 health centers). A semi-structured questionnaire and observation check list were used to collect data on HIV/AIDS related service, reporting and ordering; receiving, transportation and storage condition of ARV medicines and test kits; and supportive supervision and logistics management information system. In addition, in-depth interview with flexible probing techniques was used to complement the quantitative data with emphasis to the storage condition of ARV medicines and test kits. Quantitative data was analyzed using SPSS version-20. Analysis of qualitative data involved rigorous reading of transcripts in order to identify key themes and data was analyzed using thematic approach. The study revealed that 16 health centers and one hospital had recorded and reported patient medication record. Six months prior to the study, 14 health centers and 2 hospitals had stopped VCT services for one time or more. Three hospitals and 18 health centers claimed to have been able to submit the requisition and report concerning ARV medicines to Pharmaceutical Fund and Supply Agency according to the specific reporting period. More than three-fourth of the health centers had one or more emergency order of ARV medicines on the day of visit, while all of hospitals had emergency order more than 3 times within 6 months prior to the study. All of the hospitals and nearly half of the health centers had an emergency order of test kits more than 3 times in the past 6

  13. Incorporating location, routing, and inventory decisions in a bi-objective supply chain design problem with risk-pooling

    Science.gov (United States)

    Tavakkoli-Moghaddam, Reza; Forouzanfar, Fateme; Ebrahimnejad, Sadoullah

    2013-07-01

    This paper considers a single-sourcing network design problem for a three-level supply chain. For the first time, a novel mathematical model is presented considering risk-pooling, the inventory existence at distribution centers (DCs) under demand uncertainty, the existence of several alternatives to transport the product between facilities, and routing of vehicles from distribution centers to customer in a stochastic supply chain system, simultaneously. This problem is formulated as a bi-objective stochastic mixed-integer nonlinear programming model. The aim of this model is to determine the number of located distribution centers, their locations, and capacity levels, and allocating customers to distribution centers and distribution centers to suppliers. It also determines the inventory control decisions on the amount of ordered products and the amount of safety stocks at each opened DC, selecting a type of vehicle for transportation. Moreover, it determines routing decisions, such as determination of vehicles' routes starting from an opened distribution center to serve its allocated customers and returning to that distribution center. All are done in a way that the total system cost and the total transportation time are minimized. The Lingo software is used to solve the presented model. The computational results are illustrated in this paper.

  14. Climate policy and the intertemporal supply of fossil resources

    International Nuclear Information System (INIS)

    Beermann, Christian

    2015-01-01

    This thesis was written by Christian Beermann while he was a research assistant at the Center for Economic Studies (CES) at the University of Munich. It was completed in December 2014 and accepted as a doctoral thesis by the Department of Economics at the University of Munich in May 2015. The thesis analyses the intertemporal supply reaction of the fossil resource supply side to demand-reducing climate policies while explicitly taking into account the global warming problem. The interaction between a climate coalition that can either be global or incomplete, comprising only a subset of the world's countries in the latter case, and a representative competitive resource supplier is analysed in a Stackelberg differential game in which the coalition leads.

  15. Climate policy and the intertemporal supply of fossil resources

    Energy Technology Data Exchange (ETDEWEB)

    Beermann, Christian

    2015-05-13

    This thesis was written by Christian Beermann while he was a research assistant at the Center for Economic Studies (CES) at the University of Munich. It was completed in December 2014 and accepted as a doctoral thesis by the Department of Economics at the University of Munich in May 2015. The thesis analyses the intertemporal supply reaction of the fossil resource supply side to demand-reducing climate policies while explicitly taking into account the global warming problem. The interaction between a climate coalition that can either be global or incomplete, comprising only a subset of the world's countries in the latter case, and a representative competitive resource supplier is analysed in a Stackelberg differential game in which the coalition leads.

  16. Oak Ridge Isotope Products and Services - Current and Expected Supply and Demand

    International Nuclear Information System (INIS)

    Aaron, W.S.; Alexander, C.W.; Cline, R.L.; Collins, E.D.; Klein, J.A.; Knauer, J.B. Jr.; Mirzadeh, S.

    1999-01-01

    Oak Ridge National Laboratory (ORNL) has been a major center of isotope production research, development, and distribution for over 50 years. Currently, the major isotope production activities include (1) the production of transuranium element radioisotopes, including 252 Cf; (2) the production of medical and industrial radioisotopes; (3) maintenance and expansion of the capabilities for production of enriched stable isotopes; and, (4) preparation of a wide range of custom-order chemical and physical forms of isotope products, particularly in accelerator physics research. The recent supply of and demand for isotope products and services in these areas, research and development (R ampersand D), and the capabilities for future supply are described in more detail below. The keys to continuing the supply of these important products and services are the maintenance, improvement, and potential expansion of specialized facilities, including (1) the High Flux Isotope Reactor (HFIR), (2) the Radiochemical Engineering Development Center (REDC) and Radiochemical Development Laboratory (RDL) hot cell facilities, (3) the electromagnetic calutron mass separators and the plasma separation process equipment for isotope enrichment, and (4) the Isotope Research Materials Laboratory (IRML) equipment for preparation of specialized chemical and physical forms of isotope products. The status and plans for these ORNL isotope production facilities are also described below

  17. A multi-objective reliable programming model for disruption in supply chain

    Directory of Open Access Journals (Sweden)

    Emran Mohammadi

    2013-05-01

    Full Text Available One of the primary concerns on supply chain management is to handle risk components, properly. There are various reasons for having risk in supply chain such as natural disasters, unexpected incidents, etc. When a series of facilities are built and deployed, one or a number of them could probably fail at any time due to bad weather conditions, labor strikes, economic crises, sabotage or terrorist attacks and changes in ownership of the system. The objective of risk management is to reduce the effects of different domains to an acceptable level. To overcome the risk, we propose a reliable capacitated supply chain network design (RSCND model by considering random disruptions risk in both distribution centers and suppliers. The proposed study of this paper considers three objective functions and the implementation is verified using some instance.

  18. Supply and Demand Analysis of the Orthopaedic Trauma Surgeon Workforce in the United States.

    Science.gov (United States)

    Sielatycki, John A; Sawyer, Jeffrey R; Mir, Hassan R

    2016-05-01

    To investigate recent trends in the orthopaedic trauma workforce and to assess whether supply of orthopaedic trauma surgeons (OTS) matches the demand for their skills. Supply estimated using Orthopaedic Trauma Association (OTA) membership and American Academy of Orthopaedic Surgeons census data. The annual number of operative pelvic and acetabular fractures reported by American College of Surgeons verified trauma centers in the National Trauma Data Bank (NTDB) was used as a surrogate of demand. Because surrogates were used, the annual rate of change in OTA membership versus rate of change in operative injuries per NTDB center was compared. From 2002 to 2012, reported operative pelvic and acetabular injuries increased by an average of 21.0% per year. The number of reporting trauma centers increased by 27.2% per year. The number of OTA members increased each year except in 2009, with mean annual increase of 9.8%. The mean number of orthopaedic surgeons per NTDB center increased from 7.98 to 8.58, an average of 1.5% per year. The annual number of operative pelvic and acetabular fractures per NTDB center decreased from 27.1 in 2002 to 19.03 in 2012, down 2.0% per year. In the United States, from 2002 to 2012, the number of OTS trended upward, whereas operative pelvic and acetabular cases per reporting NTDB center declined. These trends suggest a net loss of such cases per OTS over this period.

  19. The energy and emissions footprint of water supply for Southern California

    International Nuclear Information System (INIS)

    Fang, A J; Newell, Joshua P; Cousins, Joshua J

    2015-01-01

    Due to climate change and ongoing drought, California and much of the American West face critical water supply challenges. California’s water supply infrastructure sprawls for thousands of miles, from the Colorado River to the Sacramento Delta. Bringing water to growing urban centers in Southern California is especially energy intensive, pushing local utilities to balance water security with factors such as the cost and carbon footprint of the various supply sources. To enhance water security, cities are expanding efforts to increase local water supply. But do these local sources have a smaller carbon footprint than imported sources? To answer this question and others related to the urban water–energy nexus, this study uses spatially explicit life cycle assessment to estimate the energy and emissions intensity of water supply for two utilities in Southern California: Los Angeles Department of Water and Power, which serves Los Angeles, and the Inland Empire Utility Agency, which serves the San Bernardino region. This study differs from previous research in two significant ways: (1) emissions factors are based not on regional averages but on the specific electric utility and generation sources supplying energy throughout transport, treatment, and distribution phases of the water supply chain; (2) upstream (non-combustion) emissions associated with the energy sources are included. This approach reveals that in case of water supply to Los Angeles, local recycled water has a higher carbon footprint than water imported from the Colorado River. In addition, by excluding upstream emissions, the carbon footprint of water supply is potentially underestimated by up to 30%. These results have wide-ranging implications for how carbon footprints are traditionally calculated at local and regional levels. Reducing the emissions intensity of local water supply hinges on transitioning the energy used to treat and distribute water away from fossil fuel, sources such as coal

  20. The energy and emissions footprint of water supply for Southern California

    Science.gov (United States)

    Fang, A. J.; Newell, Joshua P.; Cousins, Joshua J.

    2015-11-01

    Due to climate change and ongoing drought, California and much of the American West face critical water supply challenges. California’s water supply infrastructure sprawls for thousands of miles, from the Colorado River to the Sacramento Delta. Bringing water to growing urban centers in Southern California is especially energy intensive, pushing local utilities to balance water security with factors such as the cost and carbon footprint of the various supply sources. To enhance water security, cities are expanding efforts to increase local water supply. But do these local sources have a smaller carbon footprint than imported sources? To answer this question and others related to the urban water-energy nexus, this study uses spatially explicit life cycle assessment to estimate the energy and emissions intensity of water supply for two utilities in Southern California: Los Angeles Department of Water and Power, which serves Los Angeles, and the Inland Empire Utility Agency, which serves the San Bernardino region. This study differs from previous research in two significant ways: (1) emissions factors are based not on regional averages but on the specific electric utility and generation sources supplying energy throughout transport, treatment, and distribution phases of the water supply chain; (2) upstream (non-combustion) emissions associated with the energy sources are included. This approach reveals that in case of water supply to Los Angeles, local recycled water has a higher carbon footprint than water imported from the Colorado River. In addition, by excluding upstream emissions, the carbon footprint of water supply is potentially underestimated by up to 30%. These results have wide-ranging implications for how carbon footprints are traditionally calculated at local and regional levels. Reducing the emissions intensity of local water supply hinges on transitioning the energy used to treat and distribute water away from fossil fuel, sources such as coal.

  1. Stochastic Optimization of Supply Chain Risk Measures –a Methodology for Improving Supply Security of Subsidized Fuel Oil in Indonesia

    OpenAIRE

    Adinda Yuanita; Andi Noorsaman Sommeng; Anondho Wijonarko

    2015-01-01

    Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a...

  2. Application of Fuzzy Delphi TOPSIS to Locate Logistics Centers in Vietnam: The Logisticians’ Perspective

    Directory of Open Access Journals (Sweden)

    Thi Yen Pham

    2017-12-01

    Full Text Available Logistics centers have emerged as an important logistics infrastructure in supply chains. Hence, the problem of locating logistics centers plays a crucial role in designing and practicing logistics and supply chain management. Acknowledging the significance of logistics centers, Vietnam approved a master plan for the development of a logistics center system. However, the plan has been difficult to implementation because of the lack of the prioritization of the determinants used to locate logistics centers. This study aims to develop a benchmarking framework for choosing the locations of logistics centers based on the findings of logisticians by applying a hybrid of the fuzzy method and the technique for order of preference by similarity to ideal solution (TOPSIS, both of which are utilized extensively to overcome problems in selecting locations. The results indicate that freight demand, closeness to market, production area, customers, and transportation costs are regarded as the most important factors in deciding the location of logistics centers. In addition, among the three locations considered, the northeast provinces of Ho Chi Minh City were the best location for logistic centers, followed by North Hanoi and Da Nang city. The findings of this study make a significant contribution to both academic and practical aspects of locating logistic centers.

  3. Risks and risks mitigations in the supply chain of mangosteen: a case study

    NARCIS (Netherlands)

    Astuti, R.; Arkeman, M.M.Y.; Poerwanto, R.; Meuwissen, M.P.M.

    2013-01-01

    Mangosteen (Garcinia mangostana L.) is the highly demanded fruit for export commodity from Indonesia. The biggest mangosteen production center in Indonesia is West Java Province. The development of the mangosteen supply chain in Indonesia, particularly in West Java Province is heavily affected by

  4. Study of a conceptual nuclear energy center at Green River, Utah: water allocation issues

    International Nuclear Information System (INIS)

    Harper, N.J.

    1982-04-01

    According to preliminary studies, operation of a nine-reactor Nuclear Energy Center near Green River, Utah would require the acquisition of 126,630 acre-feet per year. Groundwater aquifers are a potential source of supply but do not present a viable option at this time due to insufficient data on aquifer characteristics. Surface supplies are available from the nearby Green and San Rafael Rivers, tributaries of the Colorado River, but are subject to important constraints. Because of these constraints, the demand for a dependable water supply for a Nuclear Energy Center could best be met by the acquisition of vested water rights from senior appropriators in either the Green or San Rafael Rivers. The Utah Water Code provides a set of procedures to accomplish such a transfer of water rights

  5. Projecting phase terminated, implementation coming soon. Environment-friendly heat supply at Ruhpolding sports center; Projekt ausgereift - Betreiber gesucht.. Oekologische Waermeversorgung des Ruhpoldinger Sport- und Freizeitzentrums

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2000-02-01

    When the public indoor swimming pool at Ruhpolding was modernized, the community took the chance to convert the whole sports and recreation center (indoor and outdoor swimming pools, skating rink and multi-purpose hall) as well as the school buildings to district heat supply from a biomass-fuelled heating power station. Apart from the financial savings, this solution also reduces exhaust emissions and makes this recreation area mor attractive. [German] Mit der Sanierung und Erweiterung des Wellenhallenbades bietet sich der Gemeinde Ruhpolding die Gelegenheit, die Waermeversorgung des Sport- und Freizeitzentrums (Wellenhallenbad, Freibad, Eissporthalle und Mehrzweckhalle) und der Schulgebaeude von der Einzelversorgung mit Oelkesseln auf die Nahwaermeversorgung mittels Biomasse-Heizwerk umzustellen. Das bringt der Gemeinde nicht nur finanzielle Vorteile, sondern entlastet das Kurgebiet erheblich von schaedlichen Abgasen und erhoeht damit die Attraktivitaet des Erholungsortes. (orig.)

  6. Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

    OpenAIRE

    Patalinghug, Epictetus E.

    2015-01-01

    Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

  7. Alignment of global supply networks based on strategic groups of supply chains

    Directory of Open Access Journals (Sweden)

    Nikos G. Moraitakis

    2017-09-01

    Full Text Available Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic supply chain perspective in order to align regional competitive priorities and supply chain structures. The objective of this research is hence to develop an approach for the supply-chain-based alignment of complex global supply networks. Method: We review existing literature from the fields of supply chain and network management, strategic sourcing, and strategic management. Based on the literature review and theoretical and practical considerations we deduce a conceptual approach to consider upstream supply chain structures in supply network alignment initiatives. Results: On the basis of these considerations and current empirical literature we transfer strategic group theory to the supply network management context. The proposed approach introduces strategic groups of supply chains as a segmentation criterion for complex global supply networks which enables the network-wide alignment of competitive priorities. Conclusion: Supply-chain-based segmentation of global supply network structures can effectively reduce the complexity, firms face when aiming to strategically align their supply chains on a holistic level. The results of this research are applicable for certain types of global supply networks and can be used for network alignment and strategy development. The approach can furthermore generate insights useable for negotiation support with suppliers.

  8. Simulation-optimization model for production planning in the blood supply chain.

    Science.gov (United States)

    Osorio, Andres F; Brailsford, Sally C; Smith, Honora K; Forero-Matiz, Sonia P; Camacho-Rodríguez, Bernardo A

    2017-12-01

    Production planning in the blood supply chain is a challenging task. Many complex factors such as uncertain supply and demand, blood group proportions, shelf life constraints and different collection and production methods have to be taken into account, and thus advanced methodologies are required for decision making. This paper presents an integrated simulation-optimization model to support both strategic and operational decisions in production planning. Discrete-event simulation is used to represent the flows through the supply chain, incorporating collection, production, storing and distribution. On the other hand, an integer linear optimization model running over a rolling planning horizon is used to support daily decisions, such as the required number of donors, collection methods and production planning. This approach is evaluated using real data from a blood center in Colombia. The results show that, using the proposed model, key indicators such as shortages, outdated units, donors required and cost are improved.

  9. Water supply

    International Nuclear Information System (INIS)

    Peterson, F.L.

    1986-01-01

    Options and methodologies for the development of fresh water supplies on Bikini Atoll are much the same as those practiced in the rest of the Marshall Islands and for that matter, most atolls in the central Pacific Ocean Basin. That is, rainfall distribution on Bikini produces a distinct wet season, lasting from about May through November, with the remaining months being generally dry. As a result, fresh water from surface catchments tends to be plentiful during the wet season? but is usually scarce during the dry months, and alternative sources such as groundwater must be utilized during this time. On Bikini the problems of fresh water supply are somewhat more difficult than for most Marshall Island atolls because rainfall is only about half the Marshall Island's average. Tus water supply is a critical factor limiting the carrying capacity of Bikini Atoll. To address this problem BARC has undertaken a study of the Bikini Atoll water supply. Te primary objectives of this work are to determine: (1) alternatives available for fresh water supply, 2 the amounts, location and quality of available supplies and 3 optimal development methods. The study planned for one's year duration, has been underway only since the summer of 1985 and is thus not yet fully completed. However, work done to date, which is presented in this report of preliminary findings, provides a reasonably accurate picture of Bikini's fresh water supplies and the various options available for their development. The work remaining to be completed will mainly add refinements to the water supply picture presented in the sections to follow

  10. Journal of Biosciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Author Affiliations. Vinod Shanker Dubey1 Ritu Bhalla2 Rajesh Luthra3. Neurobiotechnology Center, The Ohio State University, Columbus, Ohio 43210, USA; Plant Microbes Interaction Lab, Department of Biological Sciences, National University of Singapore, Singapore 117604; CSIR Complex, Dr K S Krishnan Marg, Pusa ...

  11. Developing Adaptive Training in the Classroom

    Science.gov (United States)

    2009-09-01

    Center on Education and Training for Employment, Information Series N. 392, Columbus, OH. Kolb , D. (1984). Experiential Learning . New York: Prentice...6-5 Adult Learning Theory ...Participants will learn basic strategies involved in successful negotiations. Present theory behind negotiations. • Power and Influence. • Tactics

  12. Poisson cluster analysis of cardiac arrest incidence in Columbus, Ohio.

    Science.gov (United States)

    Warden, Craig; Cudnik, Michael T; Sasson, Comilla; Schwartz, Greg; Semple, Hugh

    2012-01-01

    Scarce resources in disease prevention and emergency medical services (EMS) need to be focused on high-risk areas of out-of-hospital cardiac arrest (OHCA). Cluster analysis using geographic information systems (GISs) was used to find these high-risk areas and test potential predictive variables. This was a retrospective cohort analysis of EMS-treated adults with OHCAs occurring in Columbus, Ohio, from April 1, 2004, through March 31, 2009. The OHCAs were aggregated to census tracts and incidence rates were calculated based on their adult populations. Poisson cluster analysis determined significant clusters of high-risk census tracts. Both census tract-level and case-level characteristics were tested for association with high-risk areas by multivariate logistic regression. A total of 2,037 eligible OHCAs occurred within the city limits during the study period. The mean incidence rate was 0.85 OHCAs/1,000 population/year. There were five significant geographic clusters with 76 high-risk census tracts out of the total of 245 census tracts. In the case-level analysis, being in a high-risk cluster was associated with a slightly younger age (-3 years, adjusted odds ratio [OR] 0.99, 95% confidence interval [CI] 0.99-1.00), not being white, non-Hispanic (OR 0.54, 95% CI 0.45-0.64), cardiac arrest occurring at home (OR 1.53, 95% CI 1.23-1.71), and not receiving bystander cardiopulmonary resuscitation (CPR) (OR 0.77, 95% CI 0.62-0.96), but with higher survival to hospital discharge (OR 1.78, 95% CI 1.30-2.46). In the census tract-level analysis, high-risk census tracts were also associated with a slightly lower average age (-0.1 years, OR 1.14, 95% CI 1.06-1.22) and a lower proportion of white, non-Hispanic patients (-0.298, OR 0.04, 95% CI 0.01-0.19), but also a lower proportion of high-school graduates (-0.184, OR 0.00, 95% CI 0.00-0.00). This analysis identified high-risk census tracts and associated census tract-level and case-level characteristics that can be used to

  13. What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

    OpenAIRE

    Schwarz, Leroy B.

    2008-01-01

    A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

  14. Seismic fragility of nuclear power plant components: Phase 2, Motor control center, switchboard, panelboard and power supply

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.; Hofmayer, C.H.; Kassir, M.K.; Pepper, S.E.

    1987-12-01

    In Phase I of the Component Fragility Program, Brookhaven National Laboratory (BNL) has developed a procedure to establish the seismic fragility of nuclear power plant equipment by use of existing test data and demonstrated its application by considering two equipment pieces. In Phase II of the program, BNL has collected additional test data, and has further advanced and is applying the methodology to determine the fragility levels of selected essential equipment categories. The data evaluation of four equipment families, namely, motor control center, switchboard, panelboard and power supply has been completed. Fragility levels have been determined for various failure modes of each equipment class and the deterministic results are presented in terms of test response spectra. In addition, the test data have been analyzed for determination of the respective probabilistic fragility levels. To this end, a single g-value has been selected to approximately represent the test vibration level and a statistical analysis has been performed with the g-values corresponding to a particular failure mode. The zero period acceleration and the average spectral acceleration over a frequency range of interest are separately used as the single g-value. The resulting parameters are presented in terms of a median value, an uncertainty coefficient and a randomness coefficient. Ultimately, each fragility level is expressed in terms of a single descriptor called an HCLPF value corresponding to a high (95%) confidence of a low (5%) probability of failure. The important observations made in the process of data analysis are included in this report

  15. The role of supply chain collaboration in supply chain risk mitigation

    OpenAIRE

    Chen, Jie

    2017-01-01

    In the last two decades, supply chain operations have changed drastically. Globalization of the market, shortened product life cycle, global outsourcing and offshoring, and increasing complexity of the supply base has resulted in modern supply chains becoming more vulnerable than ever. There are also more frequent natural or man-made disasters which disrupt the supply chain operations. All these have led to higher exposure of risks of supply chains and the failure to manage the...

  16. Design of Supply Chain Networks with Supply Disruptions using Genetic Algorithm

    OpenAIRE

    Taha, Raghda; Abdallah, Khaled; Sadek, Yomma; El-Kharbotly, Amin; Afia, Nahid

    2014-01-01

    The design of supply chain networks subject to disruptions is tackled. A genetic algorithm with the objective of minimizing the design cost and regret cost is developed to achieve a reliable supply chain network. The improvement of supply chain network reliability is measured against the supply chain cost.

  17. 75 FR 66795 - Enesco, LLC, Gund Division, Distribution Center, Edison, NJ; Notice of Affirmative Determination...

    Science.gov (United States)

    2010-10-29

    ... Division, Distribution Center, Edison, NJ; Notice of Affirmative Determination Regarding Application for..., Distribution Center, Edison, New Jersey (subject firm). The determination was issued on August 27, 2010. The...). The workers are engaged in activities related to the supply of packaging and distribution services...

  18. An Evaluation of the Acquisition Streamlining Methods at the Fleet and Industrial Supply Center Pearl Harbor Hawaii

    National Research Council Canada - National Science Library

    Henry, Mark

    1999-01-01

    ...) Pearl Harbor's implementation of acquisition streamlining initiatives and recommends viable methods of streamlining the acquisition process at FISC Pearl Harbor and other Naval Supply Systems Command...

  19. Managing hospital supplies: process reengineering at Gujarat Cancer Research Institute, India.

    Science.gov (United States)

    Ramani, K V

    2006-01-01

    Aims to give an overview of the re-engineering of processes and structures at Gujarat Cancer Research Institute (GCRI), Ahmedabad. A general review of the design, development and implementation of reengineered systems in order to address concerns about the existing systems. Findings GCRI is a comprehensive cancer care center with 550 beds and well equipped with modern diagnostic and treatment facilities. It serves about 200,000 outpatients and 16,000 inpatients annually. The approach to a better management of hospital supplies led to the design, development, and implementation of an IT-based reengineered and integrated purchase and inventory management system. The new system has given GCRI a saving of about 8 percent of its annual costs of purchases, and improved the availability of materials to the user departments. Shows that the savings obtained are used not only for buying more hospital supplies, but also to buy better quality of hospital supplies, and thereby satisfactorily address the GCRI responsibility towards meeting its social obligations for cancer care.

  20. Columbus electronic freight management evaluation : achieving business benefits with EFM technologies.

    Science.gov (United States)

    2009-03-01

    Effective innovation in information technology (IT) may be the most important tool for the private and public sectors to respond to international supply chain capacity constraints and congestion. Electronic Freight Management (EFM) technologies are m...

  1. Supply Warehouse#3, SWMU 088 Operations, Maintenance, and Monitoring Report Kennedy Space Center, Florida

    Science.gov (United States)

    Murphy, Alex

    2016-01-01

    This document presents the findings, observations, and results associated with Operations, Maintenance, and Monitoring (OM&M) activities of Corrective Measures Implementation (CMI) activities conducted at Supply Warehouse #3 (SW3) located at John F. Kennedy Space Center (KSC), Florida from October 8, 2015, to September 12, 2016, and performance monitoring results for semi-annual sampling events conducted in March and September 2016. The primary objective of SW3 CMI is to actively decrease concentrations of trichloroethene (TCE) and vinyl chloride (VC) to less than Florida Department of Environmental Protection (FDEP) Natural Attenuation Default Concentrations (NADCs), and the secondary objective is to reduce TCE, cis-1,2-dichloroethene (cDCE), trans-1,2-dichloroethene (tDCE), 1,1-dichloroethene (11DCE), and VC concentrations to less than FDEP Groundwater Cleanup Target Levels (GCTLs). The SW3 facility has been designated Solid Waste Management Unit (SWMU) 088 under KSC's Resource Conservation and Recovery Act (RCRA) Corrective Action Program. Based on the results to date, the SW3 air sparging (AS) system is operating at or below the performance criteria as presented in the 2008 SW3 Corrective Measures Implementation (CMI) Work Plan and 2009 and 2012 CMI Work Plan Addenda. Since the start of AS system operations on December 19, 2012, through the September 2016 groundwater sampling event, TCE concentrations have decreased to less than the GCTL in all wells within the Active Remediation Zone (ARZ), and VC results remain less than NADC but greater than GCTL. Based on these results, team consensus was reached at the October 2016 KSC Remediation Team (KSCRT) meeting to continue AS system operations and semi-annual performance monitoring of volatile organic compounds in March 2017 at ten monitoring wells at select locations, and in September 2017 at four monitoring wells at select locations to reduce VC concentrations to below GCTL. Additionally, surface water samples

  2. Contract Coordination in Dual Sourcing Supply Chain under Supply Disruption Risk

    Directory of Open Access Journals (Sweden)

    Tong Shu

    2015-01-01

    Full Text Available This paper explores a coordination model for a three-echelon supply chain including two different manufacturers, one distributer and one retailer via the combined option and back contracts. And one manufacturer provides the high wholesale price with low supply disruption risk and the other is completely the opposite. This differs from the previous supply chain coordination model. Firstly, supply disruption is added to the three-echelon supply chain. Secondly, considering the coordination of the supply chain, we deploy the combined option and back contracts which are seldom used in the previous study. Furthermore, it is interesting that supply disruption risk and buyback factor do not affect the distributor’s order quantity from the manufacturer who has low product price and unreliable operating ability, while the order quantity increases with the rise of option premium and option strike price. The distributor’s order quantity from the manufacturer, which has high product price and reliable operating ability, increases with the rise of supply disruption risk but decreases when the buyback factor, option premium, and option strike price decrease.

  3. Modeling Relief Demands in an Emergency Supply Chain System under Large-Scale Disasters Based on a Queuing Network

    Science.gov (United States)

    He, Xinhua

    2014-01-01

    This paper presents a multiple-rescue model for an emergency supply chain system under uncertainties in large-scale affected area of disasters. The proposed methodology takes into consideration that the rescue demands caused by a large-scale disaster are scattered in several locations; the servers are arranged in multiple echelons (resource depots, distribution centers, and rescue center sites) located in different places but are coordinated within one emergency supply chain system; depending on the types of rescue demands, one or more distinct servers dispatch emergency resources in different vehicle routes, and emergency rescue services queue in multiple rescue-demand locations. This emergency system is modeled as a minimal queuing response time model of location and allocation. A solution to this complex mathematical problem is developed based on genetic algorithm. Finally, a case study of an emergency supply chain system operating in Shanghai is discussed. The results demonstrate the robustness and applicability of the proposed model. PMID:24688367

  4. Modeling Relief Demands in an Emergency Supply Chain System under Large-Scale Disasters Based on a Queuing Network

    Directory of Open Access Journals (Sweden)

    Xinhua He

    2014-01-01

    Full Text Available This paper presents a multiple-rescue model for an emergency supply chain system under uncertainties in large-scale affected area of disasters. The proposed methodology takes into consideration that the rescue demands caused by a large-scale disaster are scattered in several locations; the servers are arranged in multiple echelons (resource depots, distribution centers, and rescue center sites located in different places but are coordinated within one emergency supply chain system; depending on the types of rescue demands, one or more distinct servers dispatch emergency resources in different vehicle routes, and emergency rescue services queue in multiple rescue-demand locations. This emergency system is modeled as a minimal queuing response time model of location and allocation. A solution to this complex mathematical problem is developed based on genetic algorithm. Finally, a case study of an emergency supply chain system operating in Shanghai is discussed. The results demonstrate the robustness and applicability of the proposed model.

  5. Modeling relief demands in an emergency supply chain system under large-scale disasters based on a queuing network.

    Science.gov (United States)

    He, Xinhua; Hu, Wenfa

    2014-01-01

    This paper presents a multiple-rescue model for an emergency supply chain system under uncertainties in large-scale affected area of disasters. The proposed methodology takes into consideration that the rescue demands caused by a large-scale disaster are scattered in several locations; the servers are arranged in multiple echelons (resource depots, distribution centers, and rescue center sites) located in different places but are coordinated within one emergency supply chain system; depending on the types of rescue demands, one or more distinct servers dispatch emergency resources in different vehicle routes, and emergency rescue services queue in multiple rescue-demand locations. This emergency system is modeled as a minimal queuing response time model of location and allocation. A solution to this complex mathematical problem is developed based on genetic algorithm. Finally, a case study of an emergency supply chain system operating in Shanghai is discussed. The results demonstrate the robustness and applicability of the proposed model.

  6. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 34, 1988.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  7. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 32, 1987.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  8. High Temperature Oxidation and Electrochemical Studies Related to Hot Corrosion.

    Science.gov (United States)

    1987-12-01

    Birnbaum Dept. of Metallurgy & Mining Eng. Dr. W. C. Moshier University of Illinois Martin Marietta Laboratories Urbana , Ill 61801 1450 South...Defense Metals and Ceramics Command Infor-r.ation Center Alexandria, VA 22331 Battelle Memoria !nsri~ure ATTn: Code 03 1 505 King Avenue Columbus, OH

  9. An examination of blood center structure and hospital customer satisfaction: what can centralized and decentralized blood centers learn from each other?

    Science.gov (United States)

    Carden, Robert; DelliFraine, Jami L

    2005-01-01

    The cost of blood and blood products has increased rapidly over the last several years while the supply of available blood donors has simultaneously decreased. Higher blood costs and donor shortages have put a strain on the relationship between blood suppliers and their hospital customers. This study examines the association between blood center centralization or decentralization and several aspects of hospital satisfaction. Centralized and decentralized blood centers have significant differences in various aspects of hospital customer satisfaction. Advantages and disadvantages of the two structures are discussed, as well as areas for future research.

  10. Assessment of ground-water contamination from a leaking underground storage tank at a defense supply center near Richmond, Virginia

    International Nuclear Information System (INIS)

    Powell, J.D.; Wright, W.G.

    1990-01-01

    During 1988-89, 24 wells were installed in the vicinity of the post-exchange gasoline station on the Defense General Supply Center, near Richmond, Virginia, to collect and analyze groundwater samples for the presence of gasoline contamination from a leaking underground storage tank. Concentrations of total petroleum hydrocarbons and benzene were as high as 8.2 mg/L and 9,000 microg/L, respectively, in water from wells in the immediate vicinity of the former leaking tank, and benzene concentrations were as high as 2,300 microg/L in a well 600 ft down gradient from the gasoline station. Groundwater flow rate are estimated to be about 60 to 80 ft/yr; on the basis of these flow rates, the contaminants may have been introduced into the groundwater as long as 7-10 yrs ago. Groundwater might infiltrate a subsurface storm sewer, where the sewer is below the water table, and discharge into a nearby stream. Preliminary risk assessment for the site identified no potential human receptors to the groundwater contamination because there were no groundwater users identified in the area. Remediation might be appropriate if exposure of future potential users is concern. Alternatives discussed for remediation of groundwater contamination in the upper aquifer at the PX Service Station include no-action, soil vapor extraction, and groundwater pumping and treatment alternatives

  11. NNDC [National Nuclear Data Center] on-line services documentation

    International Nuclear Information System (INIS)

    Dunford, C.L.; Burrows, T.W.; Tuli, J.K.

    1987-01-01

    This document summarizes and describes how to access the on-line services available from the National Nuclear Data Center (NNDC) located at Brookhaven National Laboratory. The services are available free of cost to US Department of Energy, its contractors and others who support the NNDC or supply data to the NNDC. Four of the center's data bases are now accessible to non-NNDC scientists via remote connection to the center's VAX 11/780. To use this service, you must have a terminal with access by either a telephone line or the PHYSNET network. A VT100 terminal or a terminal with VT-100 emulation is recommended but not required

  12. Marine renewable energy sector early-stage supply chain

    International Nuclear Information System (INIS)

    2011-01-01

    Marine renewable energy is an emergent sector in Canada. Although supply chain studies have been performed on the United Kingdom and the United States markets, no study has been conducted yet in Canada. The aim of this study was therefore to perform a supply chain analysis in Canada to assess the maturity, strengths, and weaknesses of the sector and determine where the opportunities lie. The study emphasises that the sector is still at the prototype stage in Canada and that the industry must learn to improve its technology and begin to take on large scale projects. Canada has several strengths in the marine renewable energy sector, mainly in terms of resources and facilities, but there are also weaknesses pertaining to technology development and experience. The study concluded that the development of the sector must be centered on a solid vision; in the near term, technological innovation is needed to reach pre-commercialization while in the long term, the sector should aim for commercial application.

  13. Supply Chain Management og Supply Chain costing

    DEFF Research Database (Denmark)

    Nielsen, Steen; Mortensen, Ole

    2002-01-01

    Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

  14. Evaluation and analysis of Texas biofuel supply chains originating in the United States Midwest and Brazil.

    Science.gov (United States)

    2009-05-01

    This 2009 study, funded by the Southwest Region University Transportation Center, investigates : competing ethanol supply chains terminating in the State of Texas. Midwest corn ethanol and : Brazilian sugarcane ethanol constitute two sources of the b...

  15. Partial pressure (or fugacity) of carbon dioxide, salinity and other variables collected from Surface underway observations using Carbon dioxide (CO2) gas analyzer, Shower head chamber equilibrator for autonomous carbon dioxide (CO2) measurement and other instruments from COLUMBUS ISELIN, ENDEAVOR and others in the Coastal Waters of Florida, North Atlantic Ocean and South Atlantic Ocean from 1993-05-11 to 1996-10-17 (NODC Accession 0051984)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0051984 includes Surface underway, chemical and physical data collected from COLUMBUS ISELIN, ENDEAVOR, GYRE, OCEANUS and SEWARD JOHNSON in the...

  16. Demand grows in N. America as gas supply sources shift

    International Nuclear Information System (INIS)

    Carson, M.M.

    1996-01-01

    Growing demand for gas as a power-generation fuel is combining with changing patterns of gas transportation to present North American producers and pipelines with a series of new challenges. Results of a recent Enron study show how natural gas supplies available to US markets continue to shift their center of gravity toward Canadian and western sources. These changes--demand growth paced by electricity generation and supply source relocation--plus extraordinary gas basin price differentials this winter, point to (a) the opportunities for and risks of adding pipeline capacity in the US and Canada, on the one hand, and (b) tough decisions that may need to be made by Gulf of Mexico and Midcontinent area producers, on the other, to compete in an environment of changing economics and infrastructure

  17. Optics Supply Planning System

    International Nuclear Information System (INIS)

    Gaylord, J.

    2009-01-01

    The purpose of this study is to specify the design for an initial optics supply planning system for NIF, and to present quality assurance and test plans for the construction of the system as specified. The National Ignition Facility (NIF) is a large laser facility that is just starting operations. Thousands of specialized optics are required to operate the laser, and must be exchanged over time based on the laser shot plan and predictions of damage. Careful planning and tracking of optic exchanges is necessary because of the tight inventory of spare optics, and the long lead times for optics procurements and production changes. Automated inventory forecasting and production planning tools are required to replace existing manual processes. The optics groups members who are expected to use the supply planning system are the stakeholders for this project, and are divided into three groups. Each of these groups participated in a requirements specification that was used to develop this design. (1) Optics Management--These are the top level stakeholdersk, and the final decision makers. This group is the interface to shot operations, is ultimately responsible for optics supply, and decides which exchanges will be made. (2) Work Center Managers--This group manages the on site optics processing work centers. They schedule the daily work center operations, and are responsible for developing long term processing, equipment, and staffing plans. (3) Component Engineers--This group manages the vendor contracts for the manufacture of new optics and the off site rework of existing optics. They are responsible for sourcing vendors, negotiating contracts, and managing vendor processes. The scope of this analysis is to describe the structure and design details of a system that will meet all requirements that were described by stakeholders and documented in the analysis model for this project. The design specifies the architecture, components, interfaces, and data stores of the system

  18. The Use of Supply Chains and Supply Chain Management in the ...

    African Journals Online (AJOL)

    Dr Peter Schmitz

    supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

  19. Energy supply. Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Eickhof, N.

    1983-01-01

    This anthology presents nine papers dealing with the following subjects: 1) international and national aspects of energy supply, 2) regional and local energy supply concepts, and 3) issues of district-heat supply. Each of the nine papers was entered separately.

  20. Profits in reverse? An examination of the decisive factors for reverse supply chain profitability

    DEFF Research Database (Denmark)

    Larsen, Samuel; Jacobsen, Peter

    2015-01-01

    Although the concept of the reverse supply chain (RSC) is not unknown in industry, an inhibitor for its successful use is low (or no) profitability. A research challenge is investigating ways to establish the RSC as a profit-creating center in the organization. This paper contributes...

  1. 75 FR 22562 - Privacy Act of 1974; Systems of Records

    Science.gov (United States)

    2010-04-29

    ... and replace with ``The master file is maintained by the Director, Defense Logistics Agency Training Center, Building 11, Section 5, 3990 E. Broad Street, Columbus, OH 43216-5000. Subsets of the master file... limited through the use of locks, guards, card swipe, and other administrative procedures. The electronic...

  2. Arts-Based School Reform: A Whole School Studies One Painting.

    Science.gov (United States)

    Short, Georgianna

    2001-01-01

    Describes arts-based, anchored instruction at Fair Arts IMPACT Elementary School (Columbus, Ohio), a five-week program centered around "Sunday Afternoon on the Island of La Grande Jatte" (Georges Seurat). Addresses unit objectives such as understanding social climate with respect to race/gender discrimination and examining why people…

  3. Genetic Algorithm for Solving Location Problem in a Supply Chain Network with Inbound and Outbound Product Flows

    Directory of Open Access Journals (Sweden)

    Suprayogi Suprayogi

    2016-12-01

    Full Text Available This paper considers a location problem in a supply chain network. The problem addressed in this paper is motivated by an initiative to develop an efficient supply chain network for supporting the agricultural activities. The supply chain network consists of regions, warehouses, distribution centers, plants, and markets. The products include a set of inbound products and a set of outbound products. In this paper, definitions of the inbound and outbound products are seen from the region’s point of view.  The inbound product is the product demanded by regions and produced by plants which flows on a sequence of the following entities: plants, distribution centers, warehouses, and regions. The outbound product is the product demanded by markets and produced by regions and it flows on a sequence of the following entities: regions, warehouses, and markets. The problem deals with determining locations of the warehouses and the distribution centers to be opened and shipment quantities associated with all links on the network that minimizes the total cost. The problem can be considered as a strategic supply chain network problem. A solution approach based on genetic algorithm (GA is proposed. The proposed GA is examined using hypothetical instances and its results are compared to the solution obtained by solving the mixed integer linear programming (MILP model. The comparison shows that there is a small gap (0.23%, on average between the proposed GA and MILP model in terms of the total cost. The proposed GA consistently provides solutions with least total cost. In terms of total cost, based on the experiment, it is demonstrated that coefficients of variation are closed to 0.

  4. Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

    OpenAIRE

    Radanliev, Petar

    2015-01-01

    This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

  5. Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR)

    OpenAIRE

    Rizki Wahyuniardi; Moh. Syarwani; Ryan Anggani

    2017-01-01

    PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR) approach. The initial hierarchy model of performance measurement is tailored to the company's condi...

  6. Project approach study for nuclear power plants in the Netherlands

    International Nuclear Information System (INIS)

    1985-11-01

    The new nuclear program in the Netherlands comprises the construction of two to four nuclear power plants up to the year 2000. The main objective pursued with the implementation of the nuclear program is the supply of low-cost electricity in the future. In order to prepare the program and to provide a basis for further decisions, the Ministry of Economic Affairs has entrusted Motor-Columbus Consulting Engineers Inc., Baden, Switzerland, with a study to determine the most suitable project approach option(s) for the implementation of the future nuclear program in the Netherlands. In carrying out this study, Motor-Columbus investigated the following main project approach options: 1. turnkey contract approach; 2. split-package contract approach; 3. multi-contract approach. It is concluded that if applied in the appropriate way, the normal turnkey contract approach represents the most suitable approach under the prevailing situation in the Netherlands. (orig.)

  7. Supply chain integration and performance : the moderating effect of supply complexity

    NARCIS (Netherlands)

    Giménez, C.; van der Vaart, T.; van Donk, D.P.

    2012-01-01

    Purpose - The purpose of this paper is to investigate the effectiveness of supply chain integration in different contexts. More specifically, it aims to show that supply chain integration is only effective in buyer-supplier relationships characterised by high supply complexity.

  8. Village-level supply reliability of surface water irrigation in rural China: effects of climate change

    Science.gov (United States)

    Li, Yanrong; Wang, Jinxia

    2018-06-01

    Surface water, as the largest part of water resources, plays an important role on China's agricultural production and food security. And surface water is vulnerable to climate change. This paper aims to examine the status of the supply reliability of surface water irrigation, and discusses how it is affected by climate change in rural China. The field data we used in this study was collected from a nine-province field survey during 2012 and 2013. Climate data are offered by China's National Meteorological Information Center which contains temperature and precipitation in the past 30 years. A Tobit model (or censored regression model) was used to estimate the influence of climate change on supply reliability of surface water irrigation. Descriptive results showed that, surface water supply reliability was 74 % in the past 3 years. Econometric results revealed that climate variables significantly influenced the supply reliability of surface water irrigation. Specifically, temperature is negatively related with the supply reliability of surface water irrigation; but precipitation positively influences the supply reliability of surface water irrigation. Besides, climate influence differs by seasons. In a word, this paper improves our understanding of the impact of climate change on agriculture irrigation and water supply reliability in the micro scale, and provides a scientific basis for relevant policy making.

  9. An assessment of the natural gas supply potential of the south energy corridor from the Caspian Region to the EU

    International Nuclear Information System (INIS)

    Mavrakis, Dimitrios; Thomaidis, Fotios; Ntroukas, Ioannis

    2006-01-01

    Security and diversification of EU energy supply underlines the importance of an energy corridor bridging the natural gas reserves of the broader Caspian Region with the EU consumption centers. This paper examines the supply potential of this corridor, the major natural gas fields and the already existing networks. An assessment of the supply cost up to the Turkish borders is carried out, while the case of Egypt as a future supplier is also investigated. Conclusions review the prospects for the construction of the considered energy corridor

  10. Studies on blood supply of liver metastasis with DSA, CT and portal vein perfusion CT during superior mesenteric arterial portography

    International Nuclear Information System (INIS)

    Li Zhigang; Shi Gaofeng; Huang Jingxiang; Li Shunzong; Liang Guoqing; Wang Hongguang; Han Pengyin; Wang Qi; Gu Tieshu

    2008-01-01

    Objective: To probe the blood supply of liver metastasis by celiac artery, proper hepatic artery DSA, portal vein perfusion CT during superior mesenteric arterial portography (PCTAP). Methods: One hundred patients with liver metastases were examined prospectively by plain CT scan, multiphase enhanced CT scan, celiac arteriography and proper hepatic arteriography. Of them, 56 patients were examined by PCTAP. All primary lesions were confirmed by operation and (or) pathology examination. In order to investigate the blood supply of metastasis lesions, the software of Photoshop was used to obtain the time-attenuation curves (TDC) of tumor center, tumor edge, portal vein and normal liver parenchyma adjacent to the tumor to calculate liver perfusion for DSA image analysis, while a deconvolution model from CT perfusion software was designed for the dual blood supply. Results: DSA findings: TDC of proper hepatic arteriography showed: the mean peak concentration (K value) in tumor centers was (67 ± 12)%, and it was (76 ± 15)% for peritumor tissue, (51 ± 10)% in normal liver parenchyma. TDC of celiac arteriogaphy showed that the contrast concentration of tumor centers and tumor edge increased fast in early stage, then maintained a slight upward plateau, in the meanwhile, the contrast concentration of normal liver parenchyma kept increasing slowly. PCTAP findings: tumors exhibited no enhancement during 30 s continued scans. Conclusion: The blood supply of liver metastasis mainly comes from hepatic artery, but barely from portal vein. (authors)

  11. Removing the regional level from the Niger vaccine supply chain.

    Science.gov (United States)

    Assi, Tina-Marie; Brown, Shawn T; Kone, Souleymane; Norman, Bryan A; Djibo, Ali; Connor, Diana L; Wateska, Angela R; Rajgopal, Jayant; Slayton, Rachel B; Lee, Bruce Y

    2013-06-10

    Since many of the world's vaccine supply chains contain multiple levels, the question remains of whether removing a level could bring efficiencies. We utilized HERMES to generate a detailed discrete-event simulation model of Niger's vaccine supply chain and compared the current four-tier (central, regional, district, and integrated health center levels) with a modified three-tier structure (removing the regional level). Different scenarios explored various accompanying shipping policies and frequencies. Removing the regional level and implementing a collection-based shipping policy from the district stores increases vaccine availability from a mean of 70-100% when districts could collect vaccines at least weekly. Alternatively, implementing a delivery-based shipping policy from the central store monthly in three-route and eight-route scenarios only increases vaccine availability to 87%. Restricting central-to district vaccine shipments to a quarterly schedule for three-route and eight-route scenarios reduces vaccine availability to 49%. The collection-based shipping policy from district stores reduces supply chain logistics cost per dose administered from US$0.14 at baseline to US$0.13 after removing the regional level. Removing the regional level from Niger's vaccine supply chain can substantially improve vaccine availability as long as certain concomitant adjustments to shipping policies and frequencies are implemented. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Building a New Business Model

    Science.gov (United States)

    Berkey, Lisa

    2009-01-01

    Monarch High School in Boulder, Colorado, is one of 25 schools piloting the High School of Business program, an accelerated business administration program developed by Columbus, Ohio-based MBA"Research" and Curriculum Center. This article describes the program which uses a heavily project-based pedagogy to teach a curriculum modeled…

  13. Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR

    Directory of Open Access Journals (Sweden)

    Rizki Wahyuniardi

    2017-12-01

    Full Text Available PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR approach. The initial hierarchy model of performance measurement is tailored to the company's condition to measure its supply chain performance, while the normalization of Snorm De Boer serves to equalize the value of the matrix used as the measurement indicator. The level of importance of performance attributes is measured by weighting with subjective questionnaires. Value of performance attribute obtained reliability 19,74, responsiveness 16,91, agility 11,00; and asset management 12.26. The total performance score of 59.90. This value indicates that the performance of the supply chain is in an average position.

  14. Designing a Fuzzy Strategic Integrated Multiechelon Agile Supply Chain Network

    Directory of Open Access Journals (Sweden)

    Morteza Abbasi

    2013-01-01

    Full Text Available This paper integrates production, distribution and logistics activities at the strategic decision making level, where the objective is to design a multiechelon supply chain network considering agility as a key design criterion. A network with five echelons of supply chains including suppliers, plants, distribution centers, cross-docks, and customer zones is addressed in this paper. The problem has been mathematically formulated as a biobjective optimization model that aims to minimize the cost (fixed and variable and maximize the plant flexibility and volume flexibility. A novel multiobjective parallel simulating annealing algorithm (MOPSA is proposed to obtain the Pareto-optimal solutions of the problem. The performance of the proposed solution algorithm is compared with two well-known metaheuristics, namely, nondominated sorting genetic algorithm (NSGA-II and Pareto archive evolution strategy (PAES. Computational results show that MOPSA outperforms the other metaheuristics.

  15. Effective food supply chains : generating, modelling and evaluating supply chain scenarios

    NARCIS (Netherlands)

    Vorst, van der J.G.A.J.

    2000-01-01

    Logistical co-ordination in FMCG supply chains

    The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to

  16. Energy saving type area hot water supply system using heat of hot waste water from the sludge center as hot source for hot water; New energy rokko airando CITY. Surajjisenta karano onhaisuinetsu wo kyuyuyo netsugen ni riyosuru sho energy gata chiiki onsui kyokyu system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Heat source of area hot water supply system in Rokko island City (man-made island) is heat of combustion at the sludge center (sludge incineration plant) in this island. Dehydrated sludge cakes (230ton/day) brought from seven sewage disposal plants in Kobe City is combusted (850degC) in the fluid bed hearth. Combustion gas washed in the scrubber, hot waste water after the washing give heat into heat transfer water in the first heat exchanger. Temperature being 64degC in summer and about 50degC in winter, this heat transfer water is sent into the second heat exchanger at every condominium building throughout the pipe line system circulating in the area. At each home, gas heater and hot water supply devices fitted, additional combustion is not necessary in summer but is used according to demand in other seasons. This hot water supply service has been carried out since 1988 and at present has been used by 3600 homes. Amount of supplying hot water being about 3000cu.m/day, saving is calculated roughly as 60% of gas for hot water supply. Fee for this system is 1500/yen/month uniformly for each home. 14 figs.

  17. Fluvial geomorphology and aquatic-to-terrestrial Hg export are weakly coupled in small urban streams of Columbus, Ohio

    Science.gov (United States)

    Sullivan, S. Mažeika P.; Boaz, Lindsey E.; Hossler, Katie

    2016-04-01

    Although mercury (Hg) contamination is common in stream ecosystems, mechanisms governing bioavailability and bioaccumulation in fluvial systems remain poorly resolved as compared to lentic systems. In particular, streams in urbanized catchments are subject to fluvial geomorphic alterations that may contribute to Hg distribution, bioaccumulation, and export across the aquatic-to-terrestrial boundary. In 12 streams of urban Columbus, Ohio, we investigated the influence of fluvial geomorphic characteristics related to channel geometry, streamflow, and sediment size and distribution on (1) Hg concentrations in sediment and body burdens in benthic larval and adult emergent aquatic insects and (2) aquatic-to-terrestrial contaminant transfer to common riparian spiders of the families Pisauridae and Tetragnathidae via changes in aquatic insect Hg body burdens as well as in aquatic insect density and community composition. Hydrogeomorphic characteristics were weakly related to Hg body burdens in emergent insects (channel geometry) and tetragnathid spiders (streamflow), but not to Hg concentrations in sediment or benthic insects. Streamflow characteristics were also related to emergent insect density, while wider channels were associated with benthic insect community shifts toward smaller-bodied and more tolerant taxa (e.g., Chironomidae). Thus, our results provide initial evidence that fluvial geomorphology may influence aquatic-to-terrestrial contaminant Hg transfer through the collective effects on emergent insect body burdens as well as on aquatic insect community composition and abundance.

  18. North American natural gas supply dynamics: A focus on U.S. supply

    International Nuclear Information System (INIS)

    George, R.

    1999-01-01

    This paper discusses US natural gas supply dynamics in the context of the North American gas marketplace. Supply fundamentals are examined, methodology is briefly presented, regional supply outlooks are discussed. Assumptions, drivers and issues are highlighted. The analysis and outlook indicate that the sizeable North American resource base can be economically developed to supply growing US natural gas requirements. The major incremental supply sources are likely to come from deepwater Gulf of Mexico, Rocky Mountain regions, onshore Texas and imports from Canada. Given this outlook, major business and investment opportunities exist for the gas upstream and midstream sectors despite some short-term challenges

  19. Supply-Chain Optimization Template

    Science.gov (United States)

    Quiett, William F.; Sealing, Scott L.

    2009-01-01

    The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

  20. Supply regimes in fisheries

    DEFF Research Database (Denmark)

    Nielsen, Max

    2006-01-01

    Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extremes......, the traditional understanding of supply regimes in fisheries needs modification. This paper identifies through a case study of the East Baltic cod fishery supply regimes in fisheries, taking alternative fisheries management schemes and mesh size limitations into account. An age-structured Beverton-Holt based bio......-economic supply model with mesh sizes is developed. It is found that in the presence of realistic management schemes, the supply curves are close to vertical in the relevant range. Also, the supply curve under open access with mesh size limitations is almost vertical in the relevant range, owing to constant...

  1. Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

    OpenAIRE

    Radanliev, P

    2015-01-01

    This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

  2. Ohio Advanced Energy Manufacturing Center

    Energy Technology Data Exchange (ETDEWEB)

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote

  3. Integrated supply chain risk management

    OpenAIRE

    Riaan Bredell; Jackie Walters

    2007-01-01

    Integrated supply chain risk management (ISCRM) has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly ...

  4. Academic health centers and society: an ethical reflection.

    Science.gov (United States)

    Pellegrino, E D

    1999-08-01

    Academic health centers--which combine university, medical school, and hospital--exist to satisfy universal human needs and thus are by definition instruments of social purpose. Their core mission is threefold: to provide medical knowledge that can help relieve and prevent illness and suffering, to supply practitioners able to apply that knowledge wisely, and to serve as sites where optimal use of medical knowledge can be demonstrated and investigated. Maintaining a balance between core mission and responsiveness to social trends is a delicate exercise. Overly close accommodation to such trends can endanger the core mission, as has occurred in the United States with regard to managed care. Society and academic health centers have mutual obligations. Obligations of society include giving academic health centers financial and other support and allowing them sufficient freedom to pursue their mission; obligations of academic medical centers include accepting greater scrutiny by society and providing social criticism on matters relating to health. A task for the future is to discern how academic health centers can be responsive to social needs without being totally subservient to societal desires.

  5. Survey on collaborative planning in the supply chain: Deterministic and uncertain environment

    Directory of Open Access Journals (Sweden)

    Imma Ribas Vila

    2007-08-01

    Full Text Available The current globalization forces to the companies and the current technology allow them to have warehouse and distribution centers, own or subcontracted that can be dispersed geographically. The synchronization of the diverse partners involved in the Supply Chain (SC requires a Collaborative Planning with the purpose of work coordinated to be able to satisfy the demands of a more and more competitive market. In this work papers with respect to the collaborative planning in the supply chain are revised analyzing strategic aspects, like they can be the types, forms, relationships or benefits of the collaboration and tactical such aspects as the planning, material requirement and scheduling. The different models proposed to formalize the collaborative planning among the different partners in the SC are analyzed.

  6. An innovational application of digital power supply controller on SSRF dynamic power supply

    International Nuclear Information System (INIS)

    Chen Huanguang; Li Rui; Guo Chunlong; Shen Tianjian; Li Deming

    2008-01-01

    Control structure of dynamic power supply using PSI controller in SLS and Diamond is introduced. For designing dynamic power supply using PSI controller in the booster of SSRF, an innovative application of PSI digital power supply controller has been developed. In the commissioning of SSRF, the dynamic power supplies performed perfectly. (authors)

  7. Supply chain reliability modelling

    Directory of Open Access Journals (Sweden)

    Eugen Zaitsev

    2012-03-01

    Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

  8. Stochastic Optimization of Supply Chain Risk Measures –a Methodology for Improving Supply Security of Subsidized Fuel Oil in Indonesia

    Directory of Open Access Journals (Sweden)

    Adinda Yuanita

    2015-08-01

    Full Text Available Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a measurable and integrated risk analysis with monitoring system for the purpose of supply security of subsidized fuel. In consideration of this complex issue, uncertainty and probability heavily affected this research. Therefore, this research did the Monte Carlo sampling-based stochastic simulation optimization with the state-of-the-art "FIRST" parameter combined with the Sensitivity Analysis to determine the priority of integrated risk mitigation handling so that the implication of the new model design from this research may give faster risk mitigation time. The results of the research identified innovative ideas of risk based audit on supply chain risk management and new FIRST (Fairness, Independence, Reliable, Sustainable, Transparent parameters on risk measures. In addition to that, the integration of risk analysis confirmed the innovative level of priority on sensitivity analysis. Moreover, the findings showed that the new risk mitigation time was 60% faster than the original risk mitigation time.

  9. North American pipelines supply/demand update: challenges and opportunities

    International Nuclear Information System (INIS)

    Gopal, J.

    2002-01-01

    The author began the presentation by providing a little definition of forecasting supply, demand and price as applied to the natural gas industry, indicating that it is both science and art. An integrated grid in North America, the natural gas sector modeling relates to supply basins, demand centers and pipes includes the United States, Canada and Mexico. Some of the considerations are: huge demand from proposed power generation, conservation, and drilling impacts, as well as pipeline capacity. A chart displaying the North American model was explained. The author discussed the technically recoverable natural gas resources as well as the estimates in both Canada and the United States. The next section deals with exploration and development of frontier resources and power plant licensing, with emphasis on power plants in California. The generation assumptions for the Western Systems Coordinating Council from the Energy Commission are reviewed, placing the numbers in their proper perspective. California natural gas supply by source is examined, followed by regional natural gas spot price. The wellhead natural gas prices for North America and for the Lower 48 states are presented. The author indicates that additional pipeline capacity is required to meet the growing demand. Several factors have to be considered: the number of power plants, when and where; pipeline capacity (how much); regulations; slack capacity; cost of slack capacity, and supply. The concluding remarks touched upon the availability of gas resources, the environmental issues that affect demand, hub services that enhance service flexibility and reliability, and pipeline capacity and storage. 2 tabs., 15 figs

  10. Development of high-power inverter supply for current drive of FRC plasma

    International Nuclear Information System (INIS)

    Kitano, Katsuhisa; Higashikozono, Takamitsu; Okada, Shigefumi; Goto, Seiichi

    2003-01-01

    High-Power RF supply is developed for the current drive of FRC (Field Reversed Configuration) plasma. The rotating magnetic field is produced by the four antennas set in the parallel direction to the geometrical axis of the FRC and faced each other. The sinusoidal currents with shifted phases by 90 degree each other should be supplied to the antennas. The two power supplies are necessary if a pair of the antennas faced oppositely are connected. Considering the plasma parameters, the rotating field of 50-100kHz and 50G at the center axis is expected to be required. We develop the adequate RF power supply for the purpose. The power supply consists of the inverter circuit, the step-up transformer and the LC tank ciruit. For the switching device of the inverter circuit, the IGBT (Insulated Gate Bipolar Transistor) is adopted. The inverter circuit is full bridge type. To operate it at high voltages, its arm consists of the 3 IGBTs arranged series. The output of the inverter is connected to the tank circuit by way of the step-up transformer with air core. The tank circuit is the parallel circuit of the antenna and the capacitor. By the adjustment of the frequency of the inverter output to the resonance frequency of the tank circuit, the large sinusoidal waveform current is obtained. The developed power supply can produce the current of 5kA at 10kV to the dummy antenna with almost the same inductance of the antenna. (author)

  11. Pulsed-power-supply development for fusion applications: special research support agreement

    International Nuclear Information System (INIS)

    1980-01-01

    This is a final summary describing research and development work carried out by the Center for Electromechanics at The University of Texas at Austin (CEM-UT) for the Department of Energy during calendar years 1978, 1979, and 1980. The general purpose of this special research support program was to conduct research on pulsed power supply development for fusion applications in the areas of homopolar generators (HPGs), tokamak ohmic heating stuides, switching, and pulse compression technology

  12. Heavy oil supply economics and supply response to low oil prices

    International Nuclear Information System (INIS)

    Fisher, L.

    1999-01-01

    The dynamics of the heavy oil industry are examined, including prices, market demand, supply and supply costs. Price assumptions are provided for the reference case oil price (west Texas intermediate at Cushing). Supply cost methodology is explained. Capital and operating costs for various heavy oil and synthetic sources are derived from modeling results. The range of supply costs for heavy oil and bitumen from various sources, supply costs in terms of reference case market values and in terms of 1995-1996 average market values for Bow River crude, are derived. The CERI long term supply forecast model is explained. Western Canada upstream oil and gas cash flow and capital expenditures, eastern Canada exploration and expenditures by hydrocarbon type, and Canadian heavy oil and bitumen production based on reference case prices are estimated. Based on these projections the outlook for heavy oil at reference case prices for better than average quality resources is judged to be economic. Lower quality resources will require technology gains for successful commercialization. SAGD is a likely candidate in this respect. Again based on reference prices, production is forecast to decline by 100 Kb/d over the next five years. Diluent supply is considered to be adequate throughout the forecast period. As far as thermal bitumen is concerned, the growth could, in fact, exceed the projection, but if so, more upgrading will be required. 11 figs

  13. AC power supply systems

    International Nuclear Information System (INIS)

    Law, H.

    1987-01-01

    An ac power supply system includes a rectifier fed by a normal ac supply, and an inverter connected to the rectifier by a dc link, the inverter being effective to invert the dc output of the receiver at a required frequency to provide an ac output. A dc backup power supply of lower voltage than the normal dc output of the rectifier is connected across the dc link such that the ac output of the rectifier is derived from the backup supply if the voltage of the output of the inverter falls below that of the backup supply. The dc backup power may be derived from a backup ac supply. Use in pumping coolant in nuclear reactor is envisaged. (author)

  14. Comparison of series regulated neutral beam accel supplies with shunt regulated accel supplies

    International Nuclear Information System (INIS)

    Baker, W.; Smith, B.H.

    1976-01-01

    This study was undertaken to get a direct comparison between comparable series and shunt regulated power supplies. It is intended that the two supplies will be strictly equivalent with the same safety factors in the design of each type and the cost estimates made on the same basis. The series regulated power supply is simply a scaled up version of the 2XIIB Accel Supplies. Each supply provides 150 kV, 65 ampere, 500 ms pulse output such as will be used on the TFTR sources. The shunt regulated power supply uses high reactance transformers to provide the series impedance for the shunt regulator. The most significant difference in the performance of the two types of power supplies is that the shunt regulated supply has a minimum interrupt period of 16 ms, whereas the series regulated supply can have about 0.5 ms. Even this difference can be eliminated with a commutator circuit such as is being developed in Berkeley for the 150 kV, 20 ampere system. The 16 ms period is probably not a very serious limitation because it still permits up to 31 interrupts per 500 ms pulse. The shunt regulated system appears to be about 37 percent less expensive than the series system

  15. Optimal inventory policies with non-stationary supply disruptions and advance supply information

    NARCIS (Netherlands)

    Atasoy, B.; Güllü, R.; Tan, T.

    2012-01-01

    We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages – and hence supply disruption to (some of) her customers

  16. Optimal inventory policies with non-stationary supply disruptions and advance supply information

    NARCIS (Netherlands)

    Atasoy, B.; Güllü, R.; Tan, T.

    2011-01-01

    We consider the production/inventory problem of a manufacturer (or a retailer) under non-stationary and stochastic supply availability. Although supply availability is uncertain, the supplier would be able to predict her near future shortages -and hence supply disruption to (some of) her customers-

  17. Integrated supply chain risk management

    Directory of Open Access Journals (Sweden)

    Riaan Bredell

    2007-11-01

    Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

  18. Public-supply water use and self-supplied industrial water use in Tennessee, 2010

    Science.gov (United States)

    Robinson, John A.

    2018-04-26

    The U.S. Geological Survey (USGS), in cooperation with the Tennessee Department of Environment and Conservation, Division of Water Resources, prepared this report and displayed and analyzed water use by self-supplied industrial and public-supply water systems in Tennessee for 2010. Public-supply water systems in Tennessee provide water for domestic, industrial, and commercial uses and for municipal services. In 2010, 474 public-supply water systems distributed 917 million gallons per day (Mgal/d) of surface water (67 percent, 617 Mgal/d) and groundwater (33 percent, 300 Mgal/d) to a population of 5.7 million in Tennessee. Gross per capita water use in Tennessee during 2010 was 162 gallons per day.Since 1950, water withdrawals by public-supply water systems in Tennessee have increased from 160 Mgal/d to 917 Mgal/d in 2010. Each of the 95 counties in Tennessee was served by at least 1 public-supply water system in 2010. Tennessee public-supply water systems withdraw less groundwater than surface water, and surface-water use has increased at a faster rate than groundwater use. Since 2005, surface-water withdrawals have increased by 26 Mgal/d, and groundwater withdrawals have decreased by 29 Mgal/d, which is the first decrease in groundwater withdrawals since 1950; however, 29 systems reported increased groundwater withdrawals during 2010, and 12 of these 29 systems reported increases of 1 Mgal/d or more. Davidson County had the largest surface-water withdrawal rate (136 Mgal/d) in 2010. The largest groundwater withdrawal rate (151 Mgal/d) by a single public-supply water system was reported by Memphis Light, Gas and Water, which served more than 669,000 people in Shelby County in 2010.Self-supplied industrial water use includes water for such purposes as fabrication, processing, washing, diluting, cooling, or transporting a product; incorporating water into a product; or for sanitation needs in facilities that manufacture various products. Water withdrawals for self-supplied

  19. New mathematical modeling for a location-routing-inventory problem in a multi-period closed-loop supply chain in a car industry

    Science.gov (United States)

    Forouzanfar, F.; Tavakkoli-Moghaddam, R.; Bashiri, M.; Baboli, A.; Hadji Molana, S. M.

    2017-11-01

    This paper studies a location-routing-inventory problem in a multi-period closed-loop supply chain with multiple suppliers, producers, distribution centers, customers, collection centers, recovery, and recycling centers. In this supply chain, centers are multiple levels, a price increase factor is considered for operational costs at centers, inventory and shortage (including lost sales and backlog) are allowed at production centers, arrival time of vehicles of each plant to its dedicated distribution centers and also departure from them are considered, in such a way that the sum of system costs and the sum of maximum time at each level should be minimized. The aforementioned problem is formulated in the form of a bi-objective nonlinear integer programming model. Due to the NP-hard nature of the problem, two meta-heuristics, namely, non-dominated sorting genetic algorithm (NSGA-II) and multi-objective particle swarm optimization (MOPSO), are used in large sizes. In addition, a Taguchi method is used to set the parameters of these algorithms to enhance their performance. To evaluate the efficiency of the proposed algorithms, the results for small-sized problems are compared with the results of the ɛ-constraint method. Finally, four measuring metrics, namely, the number of Pareto solutions, mean ideal distance, spacing metric, and quality metric, are used to compare NSGA-II and MOPSO.

  20. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  1. Risikobasiertes Supply-Chain-Management

    DEFF Research Database (Denmark)

    Wieland, Andreas; Schinz, Philipp

    2015-01-01

    Das Management erlebt seit einigen Jahren dahingehend einen Paradigmenwechsel, dass nicht mehr Unternehmen als einzelne autonome Einheiten im Wettbewerb zueinander stehen, sondern die Supply Chains, in denen diese Unternehmen eingebunden sind. Ursachen hierfür sind beispielsweise die Auslagerung...... von Nicht-Kernprozessen auf vorgelagerte Stufen der Supply Chain oder auf Supply-Chain-Dienstleister sowie die Internationalisierung der Beschaffung. Dieser Paradigmenwechsel hat traditionelles Denken in den Schranken des Systems „Unternehmen“ abgelöst und zum Supply- Chain-Denken geführt, das vor......- und nachgelagerte Stufen des Systems „End-to-End-Supply-Chain“ einbezieht, etwa auch die Lieferanten von Lieferanten....

  2. Supply Chain Management Practices in Toy Supply Chains

    DEFF Research Database (Denmark)

    Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

    2005-01-01

    Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

  3. Understanding your supply chain to reduce the risk of supply chain disruption.

    Science.gov (United States)

    Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

    2012-01-01

    Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

  4. A Mathematical Approach to Supply Complexity Management Efficiency Evaluation for Supply Chain

    Directory of Open Access Journals (Sweden)

    Changhee Kim

    2015-01-01

    Full Text Available This study aims to identify the factors of complexity due to the globalization of supply chain and to measure the management efficiency of the factors which cause the supply complexity within supply chain. This study conducts an analysis to utilize linear programming and bootstrapping, targeting 12 Korean companies among the selected companies in Fortune Global 500. According to the results from the analysis, 4 companies with relatively high management efficiency of the factors which cause the supply complexity and 8 companies with relatively low management efficiency are found. The research findings reveal that public companies with the small number of products, factories, and providers relatively manage the supply complexity compared to private companies. Moreover, this study suggests projection point as a direction for relatively less efficient companies and excess quantity of input which should reduce for its achievement. This study also has an implication to establish a further standard of efficiency to manage the supply complexity for companies.

  5. Sustainable Supply Chain Design

    DEFF Research Database (Denmark)

    Bals, Lydia; Tate, Wendy

    A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

  6. Field data collection, analysis, and adaptive management of green infrastructure in the urban water cycle in Cleveland and Columbus, OH

    Science.gov (United States)

    Darner, R.; Shuster, W.

    2016-12-01

    Expansion of the urban environment can alter the landscape and creates challenges for how cities deal with energy and water. Large volumes of stormwater in areas that have combined septic and stormwater systems present on challenge. Managing the water as near to the source as possible by creates an environment that allows more infiltration and evapotranspiration. Stormwater control measures (SCM) associated with this type of development, often called green infrastructure, include rain gardens, pervious or porous pavements, bioswales, green or blue roofs, and others. In this presentation, we examine the hydrology of green infrastructure in urban sewersheds in Cleveland and Columbus, OH. We present the need for data throughout the water cycle and challenges to collecting field data at a small scale (single rain garden instrumented to measure inflows, outflow, weather, soil moisture, and groundwater levels) and at a macro scale (a project including low-cost rain gardens, highly engineered rain gardens, groundwater wells, weather stations, soil moisture, and combined sewer flow monitoring). Results will include quantifying the effectiveness of SCMs in intercepting stormwater for different precipitation event sizes. Small scale deployment analysis will demonstrate the role of active adaptive management in the ongoing optimization over multiple years of data collection.

  7. Green Supply Chain Network Design with Economies of Scale and Environmental Concerns

    Directory of Open Access Journals (Sweden)

    Dezhi Zhang

    2017-01-01

    Full Text Available This study considers a design problem in the supply chain network of an assembly manufacturing enterprise with economies of scale and environmental concerns. The study aims to obtain a rational tradeoff between environmental influence and total cost. A mixed-integer nonlinear programming model is developed to determine the optimal location and size of regional distribution centers (RDCs and the investment of environmental facilities considering the effects of economies of scale and CO2 emission taxes. Numerical examples are provided to illustrate the applications of the proposed model. Moreover, comparative analysis of the related key parameters is conducted (i.e., carbon emission tax, logistics demand of customers, and economies of scale of RDC, to explore the corresponding effects on the network design of a green supply chain. Moreover, the proposed model is applied in an actual case—network design of a supply chain of an electric meter company in China. Findings show that (i the optimal location of RDCs is affected by the demand of customers and the level of economies of scale and that (ii the introduction of CO2 emission taxes will change the structure of a supply chain network, which will decrease CO2 emissions per unit shipment.

  8. 10 CFR 600.324 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate value and the... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.324 Section 600.324 Energy DEPARTMENT OF... Supplies. (a) Title vests in the recipient upon acquisition of supplies acquired with Federal funds under...

  9. 32 CFR 34.24 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... shall retain any unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 34.24 Section 34.24 National Defense... § 34.24 Supplies. (a) Title shall vest in the recipient upon acquisition for supplies acquired with...

  10. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  11. Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

    OpenAIRE

    Templar, Simon; Hofmann, Erik; Findlay, Charles

    2016-01-01

    Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

  12. A System Dynamics Modeling of Water Supply and Demand in Las Vegas Valley

    Science.gov (United States)

    Parajuli, R.; Kalra, A.; Mastino, L.; Velotta, M.; Ahmad, S.

    2017-12-01

    The rise in population and change in climate have posed the uncertainties in the balance between supply and demand of water. The current study deals with the water management issues in Las Vegas Valley (LVV) using Stella, a system dynamics modeling software, to model the feedback based relationship between supply and demand parameters. Population parameters were obtained from Center for Business and Economic Research while historical water demand and conservation practices were modeled as per the information provided by local authorities. The water surface elevation of Lake Mead, which is the prime source of water supply to the region, was modeled as the supply side whereas the water demand in LVV was modeled as the demand side. The study was done from the period of 1989 to 2049 with 1989 to 2012 as the historical one and the period from 2013 to 2049 as the future period. This study utilizes Coupled Model Intercomparison Project data sets (2013-2049) (CMIP3&5) to model different future climatic scenarios. The model simulates the past dynamics of supply and demand, and then forecasts the future water budget for the forecasted future population and future climatic conditions. The results can be utilized by the water authorities in understanding the future water status and hence plan suitable conservation policies to allocate future water budget and achieve sustainable water management.

  13. Cluster analysis for determining distribution center location

    Science.gov (United States)

    Lestari Widaningrum, Dyah; Andika, Aditya; Murphiyanto, Richard Dimas Julian

    2017-12-01

    Determination of distribution facilities is highly important to survive in the high level of competition in today’s business world. Companies can operate multiple distribution centers to mitigate supply chain risk. Thus, new problems arise, namely how many and where the facilities should be provided. This study examines a fast-food restaurant brand, which located in the Greater Jakarta. This brand is included in the category of top 5 fast food restaurant chain based on retail sales. There were three stages in this study, compiling spatial data, cluster analysis, and network analysis. Cluster analysis results are used to consider the location of the additional distribution center. Network analysis results show a more efficient process referring to a shorter distance to the distribution process.

  14. The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

    DEFF Research Database (Denmark)

    Møller, Charles

    2006-01-01

    in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

  15. Design study of the vertical field power supply for JT-60

    International Nuclear Information System (INIS)

    Yabuno, Kohei; Tani, Keiji; Shimada, Ryuichi; Kishimoto, Hiroshi; Yoshida, Hidetoshi

    1977-09-01

    The results of a basic design study of the vertical field power supply for JT-60 (JAERI large tokamak) are described. The objective of the study is to evaluate several types of power supply circuits for fast excitation and control of the vertical field. A design requirement is to produce a rapidly increasing vertical field within accuracy of +-5% around the proper field strength required to center the plasma in the vacuum vessel. The plasma current is assumed to increase at the rate of about 100 MA/sec. To meet the requirement, a maximum voltage of 15 kV is necessary in the current build-up time, while generally relatively low voltage is necessary after the current flattop is reached. A hybrid power supply which consists of a dc power source (a thyristor converter) and an inductive energy storage system is proposed. The maximum voltage of the dc power source is determined as 4 kV from the voltage required in the current flattop time. This is sufficient also in the current build-up time if the dc power source is used together with the inductive energy storage system. (auth.)

  16. Petroleum supply monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  17. Cost of Oil and Biomass Supply Shocks under Different Biofuel Supply Chain Configurations

    Energy Technology Data Exchange (ETDEWEB)

    Uria Martinez, Rocio [ORNL; Leiby, Paul Newsome [ORNL; Brown, Maxwell L. [National Renewable Energy Laboratory (NREL)

    2018-04-01

    This analysis estimates the cost of selected oil and biomass supply shocks for producers and consumers in the light-duty vehicle fuel market under various supply chain configurations using a mathematical programing model, BioTrans. The supply chain configurations differ by whether they include selected flexibility levers: multi-feedstock biorefineries; advanced biomass logistics; and the ability to adjust ethanol content of low-ethanol fuel blends, from E10 to E15 or E05. The simulated scenarios explore market responses to supply shocks including substitution between gasoline and ethanol, substitution between different sources of ethanol supply, biorefinery capacity additions or idling, and price adjustments. Welfare effects for the various market participants represented in BioTrans are summarized into a net shock cost measure. As oil accounts for a larger fraction of fuel by volume, its supply shocks are costlier than biomass supply shocks. Corn availability and the high cost of adding biorefinery capacity limit increases in ethanol use during gasoline price spikes. During shocks that imply sudden decreases in the price of gasoline, the renewable fuel standard (RFS) biofuel blending mandate limits the extent to which flexibility can be exercised to reduce ethanol use. The selected flexibility levers are most useful in response to cellulosic biomass supply shocks.

  18. Supply Cain Risk Management

    OpenAIRE

    Goodwin, Les

    2011-01-01

    “The management of supply chain risk is crucial to any business, more so to Rolls Royce who face an almost doubling of load within the next 10 years. So what is supply chain risk management and how well is it deployed within an operational business of Rolls Royce? What are the tools and techniques available and what are the key issues around implementing world class supply chain risk management with a Supply Chain Unit within Rolls Royce?”

  19. A stochastic programming approach towards optimization of biofuel supply chain

    International Nuclear Information System (INIS)

    Azadeh, Ali; Vafa Arani, Hamed; Dashti, Hossein

    2014-01-01

    Bioenergy has been recognized as an important source of energy that will reduce dependency on petroleum. It would have a positive impact on the economy, environment, and society. Production of bioenergy is expected to increase. As a result, we foresee an increase in the number of biorefineries in the near future. This paper analyzes challenges with supplying biomass to a biorefinery and shipping biofuel to demand centers. A stochastic linear programming model is proposed within a multi-period planning framework to maximize the expected profit. The model deals with a time-staged, multi-commodity, production/distribution system, facility locations and capacities, technologies, and material flows. We illustrate the model outputs and discuss the results through numerical examples considering disruptions in biofuel supply chain. Finally, sensitivity analyses are performed to gain managerial insights on how profit changes due to existing uncertainties. - Highlights: • A robust model of biofuel SC is proposed and a sensitivity analysis implemented. • Demand of products is a function of price and GBM (Geometric Brownian Motion) is used for prices of biofuels. • Uncertainties in SC network are captured through defining probabilistic scenarios. • Both traditional feedstock and lignocellulosic biomass are considered for biofuel production. • Developed model is applicable to any related biofuel supply chain regardless of region

  20. The triple-A supply chain.

    Science.gov (United States)

    Lee, Hau L

    2004-10-01

    Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

  1. Alternative supply specifications and estimates of regional supply and demand for stumpage.

    Science.gov (United States)

    Kent P. Connaughton; David H. Jackson; Gerard A. Majerus

    1988-01-01

    Four plausible sets of stumpage supply and demand equations were developed and estimated; the demand equation was the same for each set, although the supply equation differed. The supply specifications varied from the model of regional excess demand in which National Forest harvest levels were assumed fixed to a more realistic model in which the harvest on the National...

  2. Analysis of Supply Chain Risk Management Strategies: Case Study of Supply Chain Disruptions

    OpenAIRE

    Marcelo Dias Carvalho; Leticia Ishikawa

    2016-01-01

    Supply Chain Risk Management refers to a set of strategies used by companies to avoid supply chain disruption caused by damage at production facilities, natural disasters, capacity issues, inventory problems, incorrect forecasts, and delays. Many companies use the techniques of the Toyota Production System, which in a way goes against a better management of supply chain risks. This paper studies key events in some multinationals to analyze the trade-off between the best supply chain risk mana...

  3. Editorial: Supply Chain Management

    Directory of Open Access Journals (Sweden)

    Dimitrios Aidonis

    2017-05-01

    Full Text Available This special issue has followed up the 3rd Olympus International Conference on Supply Chains held on Athens Metropolitan Expo, November 7 & 8 2015, Greece. The Conference was organized by the Department of Logistics Technological Educational Institute of Central Macedonia, in collaboration with the: a Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH, b Greek Association of Supply Chain Management (EEL of Northern Greece and the c Supply Chain & Logistics Journal. During the 2-Days Conference more than 60 research papers were presented covering the following thematic areas: (i Transportation, (ii Best Practices in Logistics, (iii Information and Communication Technologies in Supply Chain Management, (iv Food Logistics, (v New Trends in Business Logistics, and (vi Green Supply Chain Management. Three keynote invited speakers addressed interesting issues for the Operational Research, the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

  4. Nuclear fusion power supply device

    International Nuclear Information System (INIS)

    Nakagawa, Satoshi.

    1975-01-01

    Object: To use a hybrid power supply device, which comprises a thyristor power supply and a diode power supply, to decrease cost of a nuclear fusion power supply device. Structure: The device comprises a thyristor power supply connected through a closing unit and a diode power supply connected in parallel through a breaker, input of each power supply being applied with an output voltage of a flywheel AC generator. When a current transformer is excited, a disconnecting switch is turned on to close the diode power supply and a current of the current transformer is increased by an automatic voltage regulator to a set value within a predetermined period of time. Next, the current is cut off by a breaker, and when the breaker is in on position, the disconnecting switch is opened to turn on the closing unit. Thus, when a plasma electric current reaches a predetermined value, the breaker is turned on, and the current of the current transformer is controlled by the thyristor power supply. (Kamimura, M.)

  5. The design of supply chains

    OpenAIRE

    Bøge Sørensen, Lars

    2004-01-01

    Keywords Supply Chain Management, Supply Chain Design, Literature study Abstract Argues stability is a design objective for supply chain design alongside cost, lead time and responsiveness. Performs an extensive literature study on supply chain design, identifies methods, theories and objectives in the existing literature. Describes the concept external specificity and how it’s used to design supply chains. Using the concept upstream, archetypes of risk minimal and maximal desi...

  6. Mediating Dynamic Supply Chain Formation by Collaborative Single Machine Earliness/Tardiness Agents in Supply Mesh

    Directory of Open Access Journals (Sweden)

    Hang Yang

    2014-01-01

    Full Text Available Nowadays, a trend of forming dynamic supply chains with different trading partners over different e-marketplaces has emerged. These supply chains, which are called “supply mesh,” generally refer to heterogeneous electronic marketplaces in which dynamic supply chains, as per project (often make-to-order, are formed across different parties. Conceptually, in a supply mesh a dynamic supply chain is formed vertically, mediating several companies for a project. Companies that are on the same level horizontally are either competitors or cohorts. A complex scenario such as this makes it challenging to find the right group of members for a dynamic supply chain. Earlier on, a multiagent model called the collaborative single machine earliness/tardiness (CSET model was proposed for the optimal formation of make-to-order supply chains. This paper contributes the particular agent designs, for enabling the mediation of CSET in a supply mesh, and the possibilities are discussed. It is demonstrated via a computer simulation, based on samples from the U.S. textile industry, that by using intelligent agents under the CSET model it is possible to automatically find an ideal group of trading partners from a supply mesh.

  7. ENDOGENEITY OF INDONESIAN MONEY SUPPLY

    Directory of Open Access Journals (Sweden)

    Meutia Safrina Rachma

    2011-09-01

    Full Text Available There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5-2010(6, the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not have control power on money supply. The bank is only able to maintain the stability and control the movement of broad money supply. Keywords: Endogenous variable, money supply, vector autoregressionJEL classification numbers: E51, E52, E58

  8. Synergy between the Multiple Supply Chain and Green Supply Chain Management (GSCM) approaches: an initial analysis aimed at fostering supply chain sustainability

    OpenAIRE

    Ana Lima de Carvalho; Livia Rodrigues Ignácio; Kleber Francisco Esposto; Aldo Roberto Ometto

    2016-01-01

    The concept of Green Supply Chain Management (GSCM) was created in the 90s to reduce the environmental impacts of productive systems. This approach seeks to improve the environmental performance of all the participants in a supply chain, from the extraction of raw materials to the use and final disposal of the product, through relationships of collaboration or conformity between the parties. The multiple supply chains approach established by Gattorna (2009) brought to light different supply c...

  9. The design of supply chains

    DEFF Research Database (Denmark)

    Bøge Sørensen, Lars

    2004-01-01

    Keywords Supply Chain Management, Supply Chain Design, Literature studyAbstract Argues stability is a design objective for supply chain design alongside cost, leadtime and responsiveness. Performs an extensive literature study on supply chain design,identifies methods, theories and objectives...... in the existing literature. Describes the conceptexternal specificity and how it's used to design supply chains. Using the concept upstream,archetypes of risk minimal and maximal design are identified. Downstream the conceptdescribes two viable scenarios, one minimizing the impact, the other minimizing...... theprobability of (intended) departure of a supply chain partner. Finally, principles for supplychain design are described and managerial outlined....

  10. Centers of excellence in healthcare institutions: what they are and how to assemble them.

    Science.gov (United States)

    Elrod, James K; Fortenberry, John L

    2017-07-11

    Centers of excellence-specialized programs within healthcare institutions which supply exceptionally high concentrations of expertise and related resources centered on particular medical areas and delivered in a comprehensive, interdisciplinary fashion-afford many advantages for healthcare providers and the populations they serve. To achieve full value from centers of excellence, proper assembly is an absolute necessity, but guidance is somewhat limited. This effectively forces healthcare providers to pursue establishment largely via trial-and-error, diminishing opportunities for success. Successful development of a center of excellence first requires the acquisition of a detailed understanding of the delivery model and its benefits. Then, concerted actions must be taken on a particular series of administrative and clinical fronts, treating them in prescribed manners to afford synergies which yield an exceptionally high level of care. To reduce hardships associated with acquiring this rather elusive knowledge, remedy shortcomings in the literature, and potentially bolster community health broadly, this article presents information and insights gleaned from Willis-Knighton Health System's extensive experience assembling and operating centers of excellence. This work is intended to educate and enlighten, but most importantly, supply guidance which will permit healthcare establishments to replicate noted processes to realize their own centers of excellence. Centers of excellence have the ability to dramatically enhance the depth and breadth of healthcare services available in communities. Given the numerous mutual benefits afforded by this delivery model, it is hoped that the light shed by this article will help healthcare providers better understand centers of excellence and be more capable and confident in associated development initiatives, affording greater opportunities for themselves and their patient populations.

  11. Moving Segmentation Up the Supply-Chain: Supply Chain Segmentation and Artificial Neural Networks

    OpenAIRE

    Erevelles, Sunil; Fukawa, Nobuyuki

    2008-01-01

    This paper explained the concept of supply-side segmentation and transvectional alignment, and applies these concepts in the artificial neural network (ANN). To the best of our knowledge, no research has applied ANN in explaining the heterogeneity of both the supply-side and demand-side of a market in forming relational entity that consists of firms at all levels of the supply chain and the demand chain. The ANN offers a way of operationalizing the concept of supply-side segmentation. In toda...

  12. The composite supply chain efficiency model: A case study of the Sishen-Saldanha supply chain

    Directory of Open Access Journals (Sweden)

    Leila L. Goedhals-Gerber

    2016-01-01

    Full Text Available As South Africa strives to be a major force in global markets, it is essential that South African supply chains achieve and maintain a competitive advantage. One approach to achieving this is to ensure that South African supply chains maximise their levels of efficiency. Consequently, the efficiency levels of South Africa’s supply chains must be evaluated. The objective of this article is to propose a model that can assist South African industries in becoming internationally competitive by providing them with a tool for evaluating their levels of efficiency both as individual firms and as a component in an overall supply chain. The Composite Supply Chain Efficiency Model (CSCEM was developed to measure supply chain efficiency across supply chains using variables identified as problem areas experienced by South African supply chains. The CSCEM is tested in this article using the Sishen-Saldanda iron ore supply chain as a case study. The results indicate that all three links or nodes along the Sishen-Saldanha iron ore supply chain performed well. The average efficiency of the rail leg was 97.34%, while the average efficiency of the mine and the port were 97% and 95.44%, respectively. The results also show that the CSCEM can be used by South African firms to measure their levels of supply chain efficiency. This article concludes with the benefits of the CSCEM.

  13. Performance analysis of Supply Chain Management with Supply Chain Operation reference model

    Science.gov (United States)

    Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

    2018-04-01

    This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

  14. Spatial Model for Determining the Optimum Placement of Logistics Centers in a Predefined Economic Area

    Directory of Open Access Journals (Sweden)

    Ramona Iulia Țarțavulea (Dieaconescu

    2016-08-01

    Full Text Available The process of globalization has stimulated the demand for logistics services at a level of speed and increased efficiency, which involves using of techniques, tools, technologies and modern models in supply chain management. The aim of this research paper is to present a model that can be used in order to achieve an optimized supply chain, associated with minimum transportation costs. The utilization of spatial modeling for determining the optimal locations for logistics centers in a predefined economic area is proposd in this paper. The principal methods used to design the model are mathematic optimization and linear programming. The output data of the model are the precise placement of one up to ten logistics centers, in terms of minimum operational costs for delivery from the optimum locations to consumer points. The results of the research indicate that by using the proposed model, an efficient supply chain that is consistent with optimization of transport can be designed, in order to streamline the delivery process and thus reduce operational costs

  15. USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

    Directory of Open Access Journals (Sweden)

    A.L.V. Raubenheimer

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

    AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

  16. Petroleum Supply Monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  17. Alignment of global supply networks based on strategic groups of supply chains

    OpenAIRE

    Nikos G. Moraitakis; Jiazhen Huo; Hans-Christian Pfohl

    2017-01-01

    Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic su...

  18. THE ROLE OF SUPPLY CHAIN COLLABORATION ON SUSTAINABLE SUPPLY CHAIN MANAGEMENT PERFORMANCE

    OpenAIRE

    Ince, Huseyin; Ince, Andac Sahinbey

    2015-01-01

    Sustainable supply chain management and collaboration have taken big attention from academicians and practitioners. The extensive literature review is conducted to analyse the relationship between Sustainable Supply Chain Management and collaboration and its effects on performance of SSCM dimensions. Then, a framework is proposed to explain the relationship between sustainable supply chain management and collaboration. For further studies the proposed framework should be tested empirically.

  19. Risk Management in Biopharmaceutical Supply Chains

    OpenAIRE

    Ma, Yao

    2011-01-01

    Biopharmaceutical supply chains present considerable complexity issue for the formulation of optimal plans due to significant uncertainty in the supply chain. The primary goal of biopharmaceutical supply chain planning is to provide reliable supply to patients while coping with various supply chain risks. In chapter 1 first I discuss the key elements and basic characteristics of the biopharmaceutical supply chain . Then I present the major challenges in biopharmaceutical supply chain planning...

  20. Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

    Science.gov (United States)

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  1. Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

    Science.gov (United States)

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API.

  2. Supply chain planning classification

    Science.gov (United States)

    Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

    2001-10-01

    Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

  3. Modelling the Effects of Parking Charge and Supply Policy Using System Dynamics Method

    Directory of Open Access Journals (Sweden)

    Zhenyu Mei

    2017-01-01

    Full Text Available Reasonable parking charge and supply policy are essential for the regular operation of the traffic in city center. This paper develops an evaluation model for parking policies using system dynamics. A quantitative study is conducted to examine the effects of parking charge and supply policy on traffic speed. The model, which is composed of three interrelated subsystems, first summarizes the travel cost of each travel mode and then calibrates the travel choice model through the travel mode subsystem. Finally, the subsystem that evaluates the state of traffic forecasts future car speed based on bureau of public roads (BPR function and generates new travel cost until the entire model reaches a steady state. The accuracy of the model is verified in Hangzhou Wulin business district. The related error of predicted speed is only 2.2%. The results indicate that the regular pattern of traffic speed and parking charge can be illustrated using the proposed model based on system dynamics, and the model infers that reducing the parking supply in core area will increase its congestion level and, under certain parking supply conditions, there exists an interval of possible pricing at which the service reaches a level that is fairly stable.

  4. Conflict minerals from the Democratic Republic of the Congo: global tantalum processing plants, a critical part of the tantalum supply chain

    Science.gov (United States)

    Papp, John F.

    2014-01-01

    The U.S. Geological Survey (USGS) analyzes mineral and metal supply chains to identify and describe major components of mineral and metal material flows from ore extraction, through intermediate forms, to a final product. Supply chain analyses may be used (1) to identify risks to the United States associated with the supply of critical and strategic minerals and metals and (2) to provide greater supply chain transparency so that policymakers have the fact-based information needed to formulate public policy. This fact sheet focuses on the post-mining/pre-consumer-product part of the tantalum supply chain. The USGS National Minerals Information Center (NMIC) has been asked by governmental and non-governmental organizations to provide information about tantalum, tin, tungsten, and gold (collectively known as “3TG minerals”) processing facilities worldwide in response to U.S. legislation aimed at identifying and removing the supply chain links between the trade in these minerals and civil unrest in the Democratic Republic of the Congo and adjacent countries.

  5. 45 CFR 602.33 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... unused supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of... 45 Public Welfare 3 2010-10-01 2010-10-01 false Supplies. 602.33 Section 602.33 Public Welfare....33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon...

  6. 49 CFR 18.33 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 49 Transportation 1 2010-10-01 2010-10-01 false Supplies. 18.33 Section 18.33 Transportation... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  7. 14 CFR 1273.33 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Supplies. 1273.33 Section 1273.33..., Property, and Subawards § 1273.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

  8. Laser power supply

    International Nuclear Information System (INIS)

    Bernstein, D.

    1975-01-01

    The laser power supply includes a regulator which has a high voltage control loop based on a linear approximation of a laser tube negative resistance characteristic. The regulator has independent control loops for laser current and power supply high voltage

  9. Maintenance management of emergency power supply equipment (uninterruptible power supply) in Tokai reprocessing plant

    International Nuclear Information System (INIS)

    Nishida, Kyosuke; Hiyama, Hisao; Shibata, Satomi; Iwasaki, Shogo; Inami, Shinichi

    2009-01-01

    Uninterruptible power supply systems are installed in the Tokai reprocessing plant in preparation for the emergency case that the commercial power supply is stopped by an accidental or intentional interruption in the supply of electricity. The uninterruptible power supply system particularly provides a temporary power source to the important devices for the radiation control of nuclear critical monitoring in the plant. Thus, the system is potentially important and essential for nuclear plants. The paper reports the current activities such as regular inspections, replacement of parts and system update, to maintain the function of uninterruptible power supply systems. (author)

  10. Essentials of supply chain management

    CERN Document Server

    Hugos, Michael H

    2011-01-01

    The latest thinking, strategies, developments, and technologies to stay current in supply chain management Presenting the core concepts and techniques of supply chain management in a clear, concise and easily readable style, the Third Edition of Essentials of Supply Chain Management outlines the most crucial tenets and concepts of supply chain management.

  11. 40 CFR 31.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Supplies. 31.33 Section 31.33... Requirements Changes, Property, and Subawards § 31.33 Supplies. (a) Title. Title to supplies acquired under a...

  12. 13 CFR 143.33 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Supplies. 143.33 Section 143.33..., and Subawards § 143.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

  13. 29 CFR 1470.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    .... If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair market... 29 Labor 4 2010-07-01 2010-07-01 false Supplies. 1470.33 Section 1470.33 Labor Regulations... Changes, Property, and Subawards § 1470.33 Supplies. (a) Title. Title to supplies acquired under a grant...

  14. 45 CFR 1183.33 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 45 Public Welfare 3 2010-10-01 2010-10-01 false Supplies. 1183.33 Section 1183.33 Public Welfare... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  15. 38 CFR 43.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Supplies. 43.33 Section... Requirements Changes, Property, and Subawards § 43.33 Supplies. (a) Title. Title to supplies acquired under a...

  16. 45 CFR 2541.330 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 4 2010-10-01 2010-10-01 false Supplies. 2541.330 Section 2541.330 Public Welfare..., Property and Subawards § 2541.330 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

  17. 32 CFR 32.35 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... in total aggregate value upon termination or completion of the project or program and the supplies... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 32.35 Section 32.35 National Defense... ORGANIZATIONS Post-Award Requirements Property Standards § 32.35 Supplies. (a) Title to supplies shall vest in...

  18. 10 CFR 600.233 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.233 Section 600.233 Energy DEPARTMENT OF... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  19. 32 CFR 33.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ...) Disposition. If there is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair... 32 National Defense 1 2010-07-01 2010-07-01 false Supplies. 33.33 Section 33.33 National Defense... Requirements Changes, Property, and Subawards § 33.33 Supplies. (a) Title. Title to supplies acquired under a...

  20. 20 CFR 437.33 - Supplies.

    Science.gov (United States)

    2010-04-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Supplies. 437.33 Section 437.33 Employees... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  1. 22 CFR 135.33 - Supplies.

    Science.gov (United States)

    2010-04-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Supplies. 135.33 Section 135.33 Foreign... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  2. 45 CFR 92.33 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 45 Public Welfare 1 2010-10-01 2010-10-01 false Supplies. 92.33 Section 92.33 Public Welfare..., Property, and Subawards § 92.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant...

  3. 15 CFR 24.33 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Supplies. 24.33 Section 24.33 Commerce..., and Subawards § 24.33 Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will...

  4. NASA, Building Tomorrow's Future

    Science.gov (United States)

    Mango, Edward

    2011-01-01

    We, as NASA, continue to Dare Mighty Things. Here we are in October. In my country, the United States of America, we celebrate the anniversary of Christopher Columbus's arrival in the Americas, which occurred on October 12, 1492. His story, although happening over 500 years ago, is still very valid today. It is a part of the American spirit; part of the international human spirit. Columbus is famous for discovering the new world we now call America, but he probably never envisioned what great discoveries would be revealed many generations later. But in order for Columbus to begin his great adventure, he needed a business plan. Ho would he go about obtaining the funds and support necessary to build, supply, and man the ships required for his travels? He had a lot of obstacles and distractions. He needed a strong, internal drive to achieve his plans and recruit a willing crew of explorers also ready to risk their all for the unknown journey ahead. As Columbus set sail, he said "By prevailing over all obstacles and distractions, one may unfailingly arrive at his chosen goal or destination." Columbus may not have known he was on a journey for all human exploration. Recently, Charlie Bolden, the NASA Administrator, said, "Human exploration is and has always been about making life better for humans on Earth." Today, NASA and the U.S. human spaceflight program hold many of the same attributes as did Columbus and his contemporaries - a willing, can-do spirit. We are on the threshold of exciting new times in space exploration. Like Columbus, we need a business plan to take us into the future. We need to design the best ships and utilize the best designers, with their past knowledge and experience, to build those ships. We need funding and support from governments to achieve these goals of space exploration into the unknown. NASA does have that business plan, and it is an ambitious plan for human spaceflight and exploration. Today, we have a magnificent spaceflight

  5. Trim coil power supplies

    International Nuclear Information System (INIS)

    Haisler, R.; Peeler, H.; Zajicek, W.

    1985-01-01

    The 18 trim coil power supplies have been constructed and are now in place in the K500 pit and pit mezzanine. Final wiring of the primary power and control power is proceeding along with installation of cooling water supplies. The supplies are expected to be ready for final testing into resistive loads at the beginning of June, 1985

  6. 21 CFR 1403.33 - Supplies.

    Science.gov (United States)

    2010-04-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Supplies. 1403.33 Section 1403.33 Food and Drugs... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  7. 34 CFR 80.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 34 Education 1 2010-07-01 2010-07-01 false Supplies. 80.33 Section 80.33 Education Office of the... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

  8. Analysis of three-phase power-supply systems using computer-aided design programs

    International Nuclear Information System (INIS)

    Oberst, E.F.

    1977-01-01

    A major concern of every designer of large, three-phase power-supply systems is the protection of system components from overvoltage transients. At present, three computer-aided circuit design programs are available in the Magnetic Fusion Energy (MFE) National Computer Center that can be used to analyze three-phase power systems: MINI SCEPTRE, SPICE I, and SPICE II. These programs have been used at Lawrence Livermore Laboratory (LLL) to analyze the operation of a 200-kV dc, 20-A acceleration power supply for the High Voltage Test Stand. Various overvoltage conditions are simulated and the effectiveness of system protective devices is observed. The simulated overvoltage conditions include such things as circuit breaker openings, pulsed loading, and commutation voltage surges in the rectifiers. These examples are used to illustrate the use of the computer-aided, circuit-design programs discussed in this paper

  9. Practical switching power supply design

    CERN Document Server

    Brown, Martin C

    1990-01-01

    Take the ""black magic"" out of switching power supplies with Practical Switching Power Supply Design! This is a comprehensive ""hands-on"" guide to the theory behind, and design of, PWM and resonant switching supplies. You'll find information on switching supply operation and selecting an appropriate topology for your application. There's extensive coverage of buck, boost, flyback, push-pull, half bridge, and full bridge regulator circuits. Special attention is given to semiconductors used in switching supplies. RFI/EMI reduction, grounding, testing, and safety standards are also deta

  10. Concurrent Product & Supply Chain Creation

    DEFF Research Database (Denmark)

    Gubi, Ebbe

    it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

  11. Halalan Toyyiban Supply Chain The New Insights in Sustainable Supply Chain Management

    OpenAIRE

    Omar, Emi Normalina; Jaafar, Harlina Suzana; Osman, Muhamad Rahimi; Nasruddin, Faisol

    2013-01-01

    Purpose: In today’s highly competitive world scenario, in order for logistics and supply chain firms to be successful, resilient and sustainable, halalan-toyyiban supply chain could be the new insight in assisting the firm. Hence, the purpose of this study is to provide a practical definition for developing an effective supply chain through halalan toyyiban processes and comparing the similarities and differences of the halal term. Design/methodology/approach: The analysis is develo...

  12. Supply of basic food, energy, and energy-supplying foodstuffs to the population of Jordan

    Energy Technology Data Exchange (ETDEWEB)

    Hamdan, M R

    1979-04-27

    The supply of energy and energy-supplying foodstuffs to the population of Jordan is determined on a regional basis. Food is supplied by the agricultural sector and by imports. The influence of prices on foreign trade and consumption is analyzed. The investigation shows that most of the food supplied is of vegetable origin. The demand for animal protein is covered by 82% on an average. There are no symptoms of malnutrition among the population.

  13. Pricing Decisions of a Dual-Channel Supply Chain considering Supply Disruption Risk

    Directory of Open Access Journals (Sweden)

    Yancong Zhou

    2018-01-01

    Full Text Available Supply disruption may cause strong complaints of customers, which is a cost loss for the firms in the supply chain. Obviously, if realizing that there is the disruption risk, the members in a supply chain will adjust their decisions. For analyzing the influence, we consider a popular supply chain mode with dual channels, where one manufacturer has its direct sales channel and one traditional retailer channel. The manufacturer may suffer a supply disruption so that all ordered products by the retailer or the direct retail channel will be lost, and the members in supply chain will bear the corresponding disruption penalty from the customers. By considering four structures with different market power relations, the closed-form optimal price decisions of the four models are given. We found that the disruption factor improves the sales prices for any member structure as compared to the supply chain without the disruption. And the direct retail prices in the different modes are the same as each other, but the price of the traditional channel is influenced by the market share. And the sorts of the sales prices under different structures are given. We also conduct some extensive numerical analysis and compare the results under different structures. We observe that the expected optimal profits of considering the external penalty are smaller than those of no external penalty, and we give a sort of the optimal expected profits. And we also provide the effects of some parameters on the optimal decisions and the optimal expected profits.

  14. The ATOMKI Accelerator Center

    International Nuclear Information System (INIS)

    Biri, S.; Kormany, Z.; Berzi, I.; Hunyadi, M.

    2009-01-01

    In 2009 a new division was established in our institute: the ATOMKI Accelerator Center (AAC). Before this time the facilities and staff of AAC belonged to other departments of the institute. The re-organization however, was necessary. It was understood that the translocation of all the accelerators into a centralized unit is advantageous in numerous fields. Here we just mention some of them. The submission of any instrumentation type proposal (EU or domestic) will be easier and has a higher chance to be supported. The organization and distribution of the beamtimes will be more equal and optimal. The usage of the maintenance and spare tools can became better and cheaper. The operating staff (cca. 20 person) can serve at more than one accelerator and the teams can help each other. The accelerator center actually became a fourth new basic unit of the institute besides the three traditional scientific divisions (see the Atomki homepage for the organization chart). The following six main facilities belong to the accelerator center: Cyclotron; VdG-5 accelerator; VdG-1 accelerator; ECR ion source; Isotope separator; Tandetron (under installation). In figure 1 the placements of these machines are shown in an artistic 3D map of the Atomki. The table 1 summarizes the main parameters of the accelerators. More detailed technical specification of the machines can be found in the new homepage of the center. In 2009 all the accelerators operated as scheduled, safely and without major breakdowns. After the experiences in the first months it can be concluded that the new center works well both for technical and human point of views. In the next sub-chapters the 2009 operation and development details of the individual accelerators are summarized. Cyclotron operation. The operation of the cyclotron in 2009 was concentrated to the usual 9 months; January, July and August were reserved for maintenance and holidays. The overall working time of the accelerator was 2009 hours; the time

  15. A GRASP model in network design for two-stage supply chain

    Directory of Open Access Journals (Sweden)

    Hassan Javanshir

    2011-04-01

    Full Text Available We consider a capacitated facility location problem (CFLP which contains a production facility and distribution centers (DCs supplying retailers' demand. The primary purpose is to locate distribution centres in the network and the objective is the minimization of the sum of fixed facility location, pipeline inventory, safety stock and lost sales. We use Greedy randomized adaptive search procedures (GRASP to solve the model. The preliminary results indicate that the proposed method of this paper could provide competitive results in reasonable amount time.

  16. Supply Chain Management

    DEFF Research Database (Denmark)

    Wieland, Andreas; Handfield, Robert B.

    Supply chain management has made great strides in becoming a discipline with a standalone body of theories. As part of this evolution, researchers have sought to embed and integrate observed supply chain management phenomena into theoretical statements. In our review, we explore where we have been...

  17. The Tax-Efficient Supply Chain

    DEFF Research Database (Denmark)

    Webber, Stuart

    2011-01-01

    Many multinational enterprises are restructuring supply chains to reduce their cost structures. As trade barriers fall and communications technologies improve, it has become easier and more cost-effective to manage business operations across international borders. This has motivated businesses...... practitioners in France, South Africa, Switzerland, Mexico, Argentina, and the United States. Companies are restructuring their supply chains and simultaneously reducing their income tax obligations. This article demonstrates that MNEs should link income tax and supply chain considerations when restructuring...... their supply chains, and they should endeavor to maximize net income when doing so. This recommendation differs from the great majority of supply chain literature, which has generally recommended that businesses seek to minimize pretax costs. One of the most important activities for both supply chain and tax...

  18. Life cycle cost optimization of biofuel supply chains under uncertainties based on interval linear programming.

    Science.gov (United States)

    Ren, Jingzheng; Dong, Liang; Sun, Lu; Goodsite, Michael Evan; Tan, Shiyu; Dong, Lichun

    2015-01-01

    The aim of this work was to develop a model for optimizing the life cycle cost of biofuel supply chain under uncertainties. Multiple agriculture zones, multiple transportation modes for the transport of grain and biofuel, multiple biofuel plants, and multiple market centers were considered in this model, and the price of the resources, the yield of grain and the market demands were regarded as interval numbers instead of constants. An interval linear programming was developed, and a method for solving interval linear programming was presented. An illustrative case was studied by the proposed model, and the results showed that the proposed model is feasible for designing biofuel supply chain under uncertainties. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Background issues of oil supply trading in Pacific island countries

    International Nuclear Information System (INIS)

    1990-01-01

    The 1980s has been a decade of considerable change within the petroleum industry resulting in new supply arrangements and continued uncertainty within the island countries about reasonable supply and pricing terms. Formulating an effective response is all the more challenging for small countries which have only recently become independent, which have miniscule public sector organizations responsible for energy policy and which occupy a region where petroleum dominates commercial energy use to a greater extent, well over 90 per cent, than any other part of the world. During the past five years the Energy Resources Section of ESCAP, and staff members of the Energy Program within the East West Center in Honolulu have frequently worked closely with the Pacific Energy Development Programme (PEDP) to advise Pacific island Governments on a wide range of petroleum policy and administration issues, including shipping, overall supply arrangements, contracts for refined products, price control and monitoring, regional co-operation, and storage options. They have also organized a number of formal and informal training activities within the petroleum sector and worked closely with a World Bank team which investigated regional bulk oil purchase in 1986. This report is of interest to readers concerned with options facing small countries, from both national and regional perspectives, for dealing with petroleum policy. Refs, figs and tabs

  20. Supply chain dynamics in healthcare services.

    Science.gov (United States)

    Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

    2010-01-01

    The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

  1. ENEL high and medium voltage electrical substations for power supply to urban centers

    International Nuclear Information System (INIS)

    Bargigia, A.; Boatto, C.; Di Mario, A.; Fava, N.; Sciarra, S.; Speziali, R.

    1991-12-01

    Modular high and medium voltage gas insulated electrical substations are being used by ENEL (Italian Electricity Board) to meet the specific needs of urban centers with special design and sizing constraints of a historical/architectural nature. This paper illustrates the key design, construction operation and performance characteristics of these standardized units. The descriptions include brief notes on equipment-transformer interconnection, interchangeability and environmental compatibility. Performance test procedures and results of actual reliability and certification tests on some substations are reported

  2. DataCenterCooling. Climatization for extreme low energy consumption. Part 1; DataCenterKoeling. Klimatisering voor extreem laag energiegebruik. Deel 1

    Energy Technology Data Exchange (ETDEWEB)

    Havenaar, D.

    2012-12-15

    A data center (or computer center) for IT equipment (e.g. servers) has various amenities (e.g. air conditioning, fire alarm system and backup energy / power emergency supply). Additionally, a datacenter consist of fast Internet connections and physical security measures with access and camera control. Previously, each company had irs own server space with energy consuming comfort air conditioning systems in which their ICT equipment was placed [Dutch] Een datacenter (rekencentrum) voor bedrijfskritische ICT-apparatuur zoals servers, heeft diverse voorzieningen (klimaatbeheersing, brandmeldsysteem en back-up energie/noodstroomvoorziening. Daarnaast bevat een datacenter snelle internetverbindingen en is het voorzien van fysieke veiligheidsmaatregelen met toegangscontrole en camerabewaking. Voorheen hadden bedrijven ieder hun eigen serverruimte met energie verslindende comfort airco installaties) waarin hun ICT-apparatuur was geplaatst.

  3. DataCenterCooling. Climatization for extreme low energy consumption. Part 2; DataCenterKoeling. Klimatisering voor extreem laag energiegebruik. Deel 2

    Energy Technology Data Exchange (ETDEWEB)

    Havenaar, D.

    2013-01-15

    A data center (or computer center) for IT equipment (e.g. servers) has various amenities (e.g. air conditioning, fire alarm system and backup energy / power emergency supply). Additionally, a datacenter consist of fast Internet connections and physical security measures with access and camera control. Previously, each company had irs own server space with energy consuming comfort air conditioning systems in which their ICT equipment was placed [Dutch] Een datacenter (rekencentrum) voor bedrijfskritische ICT-apparatuur zoals servers, heeft diverse voorzieningen (klimaatbeheersing, brandmeldsysteem en back-up energie/noodstroomvoorziening. Daarnaast bevat een datacenter snelle internetverbindingen en is het voorzien van fysieke veiligheidsmaatregelen met toegangscontrole en camerabewaking. Voorheen hadden bedrijven ieder hun eigen serverruimte met energie verslindende comfort airco installaties) waarin hun ICT-apparatuur was geplaatst.

  4. Fuel supply security

    International Nuclear Information System (INIS)

    Wakabayashi, Hiroaki

    1987-01-01

    Stable fuel supply is a prerequisite for any nuclear power program including ISER-PIUS. It encompasses procurement of uranium ore, enriched uranium and fuel elements. Uranium is different from oil in that it can be stockpiled for more than a decade besides the fact that the core residence time is as long as six years, for example in the case of ISER-PIUS. These basic fuel characteristics are favoring nuclear fuel over others in terms of supply security. The central concern will be a gradual increase in prices of uranium and enrichment. Under the present glut situation with the worldwide prevalence of LWRs, fuel supply security seems ensured for the time being till the middle of 21st century. It is estimated that by the turn of the century, the free world will have roughly 450 GWe capacity of nuclear power. If 10 % is supplied for ISER-PIUS, more than 200 modules of 200 MWe ISER-PIUS may be deployed all over the world probably starting around 2000. As part of the fuel supply security consideration, heavy water reactor (HWR) may seem interesting to such a country as Indonesia where there is uranium resources but no enrichment capability. But it needs heavy water instead and the operation is not so easy as of LWR, because of the positive void coefficient as was seen at the Chernobyl-4. Safeguarding of the fuel is also difficult, because it lends itself to on line refueling. The current and future situation of the fuel supply security for LWR seem well founded and established long into the future. (Nogami, K.)

  5. NNDC [National Nuclear Data Center] support for fusion nuclear data needs

    International Nuclear Information System (INIS)

    Dunford, C.L.

    1988-01-01

    The National Data Center (NNDC) located at Brookhaven National Laboratory is an outgrowth of the Sigma Center founded by D.J. Hughes to compile low energy neutron reaction data in the 1950's. The center has played a lead role in the production of evaluated nuclear data (ENDF/B) for the United States nuclear power program. This data file, now in its sixth version, is produced as a cooperative effort of many DOE funded organizations via the Cross Section Evaluation Working Group (GSEWG). The NNDC's role, in addition to providing the structure and leadership for CSEWG, is to supply compiled bibliographic and experimental data and provide file processing, checking, distribution and documentation services. In the past, the NNDC has also produced nuclear data evaluations.lt. slash

  6. Control of supply temperature

    Energy Technology Data Exchange (ETDEWEB)

    Madsen, H; Nielsen, T S; Soegaard, H T

    1996-09-01

    For many district heating systems, e.g. the system in Hoeje Taastrup, it is desirable to minimize the supply temperature from the heat production unit(s). Lower supply temperature implies lower costs in connection with the production and distribution of heat. Factors having impact on the heat demand are for instance solar radiation, wind speed, wind direction and a climate independent part, which is a function of the time of the day/week/year. By applying an optimization strategy, which minimizes the supply temperature, it is assumed that optimal economical operation can be obtained by minimizing the supply temperature and thereby the heat losses in the system. The models and methods described in this report take such aspects into account, and can therefore be used as elements in a more efficient minimization of the supply temperature. The theoretical part of this report describes models and methods for optimal on-line control of the supply temperature in district heating systems. Some of the models and methods have been implemented - or are going to be implemented - in the computer program PRESS which is a tool for optimal control of supply temperature and forecasting of heat demand in district heating systems. The principles for using transfer function models are briefly described. The ordinary generalized predictive control (OGPC) method is reviewed, and several extensions of this method are suggested. New controller, which is called the extended generalized predictive controller (XGPC), is described. (EG) 57 refs.

  7. Can We Defend the Defense Supply Chain Lessons Learned from Industry Leaders in Supply Chain Management

    Science.gov (United States)

    2018-03-01

    Simpson, “Tim Cook: The ‘Cool Customer ’ Behind Apple’s Supply Chain Success,” Supply Management , January 18, 2016, https://www.cips.org/supply... management /analysis/2016/february/tim- cook-the-cool- customer -behind-apples-supply-chain-success/. 13 Kif Leswing, “Apples ‘Shreds” Old iPhones to Prevent...chain, including products, services, information, finances, demand, relationships , and risks. In a more complete definition, supply chain management

  8. WATER SUPPLY ANALYSIS

    International Nuclear Information System (INIS)

    Clark, R.D.

    1996-01-01

    This analysis defines and evaluates the surface water supply system from the existing J-13 well to the North Portal. This system includes the pipe running from J-13 to a proposed Booster Pump Station at the intersection of H Road and the North Portal access road. Contained herein is an analysis of the proposed Booster Pump Station with a brief description of the system that could be installed to the South Portal and the optional shaft. The tanks that supply the water to the North Portal are sized, and the supply system to the North Portal facilities and up to Topopah Spring North Ramp is defined

  9. Pricing Models for Dual-channel Reverse Supply Chain Considering Regional Differences under “Internet Recycling” Mode in China

    Science.gov (United States)

    Wu, Di; Li, Peng; Chen, Juhong

    2018-01-01

    In recent years, the Internet technology has been deeply influencing recycling industry to make it more intelligent and interconnected. However, most existing papers on “Internet Recycling” neglected the problem of pricing strategy under online and offline channels for different levels of recyclers. Moreover, the effect of regional differences has been emphasized a lot in dual-channel forward supply chain, but recycling field has seldom been concerned about it. In this paper, a recycling system consisting of one recycling center and several third-party recyclers (TPR) was investigated based on traditional mode and dual-channel mode. The dual-channel reverse supply chain model is transformed from traditional mode by the introduction of online channel. It involves two recycling modes, as recycling centre for online recovery and “Recycling center+TPR” for offline recovery. By establishing pricing strategies based on Stackelberg game model, the impacts of regional differences were analysed. Finally, numerical analysis was given to illustrate the effectiveness of the pricing mechanisms and strategies.

  10. Management of foot and ankle injuries in pediatric and adolescent athletes: a narrative review

    Directory of Open Access Journals (Sweden)

    Gill LE

    2018-04-01

    Full Text Available Laura E Gill,1,2 Kevin E Klingele,1,2 1Department of Orthopedic Surgery, Nationwide Children’s Hospital, Columbus, OH, USA; 2Department of Orthopaedics, The Ohio State University Wexner Medical Center, Columbus, OH, USA Abstract: In this review, we focus on the treatment of injuries to the foot and ankle in the adolescent athlete. While many injuries in the adolescent foot and ankle are similar to or overlap with their counterparts in the adult population, the anatomy of the adolescent ankle, especially the presence of growth plates, results in different injury patterns in many cases and calls for specific management approaches. We discuss the unique anatomy of the pediatric patient as well as the diagnostic evaluation and treatment of common injuries in the young athlete. Keywords: foot, ankle, lower extremity, pediatric athlete, growth plate, Lisfranc injury 

  11. Contribution of components of Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement-A Pilot Empirical Study of the Indian Automobile Manufacturing Sector

    OpenAIRE

    Mohd. Asif Gandhi

    2017-01-01

    This paper is one of the several extensions of the research works done by [5]. Green Supply Chain Practices have been known to have an impact on Green Supply Chain Performance [5].This paper tests empirically through a pilot study of the Indian Automobile Manufacturing Sector, the contribution of the three variables constituting the construct Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement. Also the paper establishes the reliability of the questionnaire...

  12. Position Paper on Intelligent Supply Chains

    DEFF Research Database (Denmark)

    Møller, Charles

    This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further explorati...... of intelligent supply chains. It is concluded that information management is critical to intelligent supply chains and a research agenda is outlined.......This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further exploration...... the concept of Intelligent Supply Chain and to establish an overall perspective based on information management. The claim made here is that the notion of the intelligent enterprise contributes with a new perspective on supply chain management that addresses the current challenges in an industrial supply...

  13. SUPPLY CHAIN MANAGEMENT – KEY FACTORS

    Directory of Open Access Journals (Sweden)

    Magdalena Daniela DINU

    2014-06-01

    Full Text Available This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of both Supply Chain’ s components, procedures, workflow, processes and the importance of Supply Chain Management into maximizing company's value. SCORE model able to provide solid information about measuring performance and identifying priorities within Supply Chain Management will help us to understand the key factors by analyzing its elements: Plan, Source, Make, Deliver,Return, Enable. These elements covers all the challenging areas from first to third tier of Supply Chain Management.

  14. Development of HV power transmission technology. Electric power supply until first world war; Entwicklung der Hochspannungsuebertragungstechnik. Die Elektroenergieversorgung bis zum Ersten Weltkrieg

    Energy Technology Data Exchange (ETDEWEB)

    Dittmann, Frank [Deutsches Museum, Muenchen (Germany)

    2009-11-02

    Story of power supply from 1880 to 1935 in Germany starting first with light centers, first public plants for power utilization followed by steam power plants and erection of overhead power lines. (GL)

  15. U.S. uranium supply outlook

    International Nuclear Information System (INIS)

    Hogerton, J.F.

    1977-01-01

    The subject is analysed in the light of figures and forecasts contained in the following diagrams: forecasts of U.S. uranium production, 1977 to 1990; indicated relationship between annual U.S. uranium supply and demand, 1977 to 1986; presently indicated cumulative U.S. uranium supply/demand balance, 1977 to 1990; indicated cumulative U.S. supply/demand balance (shortage or surpluses) 1976 to 1990; presently indicated balance between outstanding U.S. utility procurement needs and uncommitted domestic supply capability 1977 to 1986; projected U.S. uranium requirements in relation to existing supply base and presently indicated additional domestic resource potential, 1977 to 2000. (U.K.)

  16. Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

    Science.gov (United States)

    Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

    2014-01-01

    Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

  17. Innovation Across the Supply Chain

    DEFF Research Database (Denmark)

    Druehl, Cheryl; Carrillo, Janice; Hsuan, Juliana

    Innovation is an integral part of every firm’s ongoing operations. Beyond product innovation, supply chain innovations offer a unique source of competitive advantage. We synthesize recent research on innovation in the supply chain, specifically, innovative supply chain processes...

  18. Energy discharge heater power supply

    International Nuclear Information System (INIS)

    Jaskierny, W.

    1992-11-01

    The heater power supply is intended to supply capacitively stored,energy to embedded heater strips in cryo magnets. The amount of energy can be controlled by setting different charge different capacitor values. Two chassis' can be operated in series or interlocks are provided. The charge voltage, number of capacitors pulse can be monitored. There and dual channel has two discharge supplies in one chassis. This report reviews the characteristics of this power supply further

  19. D. C. power supply

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, N. Watanabe, Y.; Kitani, M

    1978-04-01

    DC power supplies are for ordinary and emergency use as power sources for various structures such as office buildings, department stores, hotels, and for facilities such as roads, tunnels, dams, power stations, etc. There is strong demand for these dc power supplies to be safe, automated, and maintenance free, and to have high reliability. A dc power supply which meets these demands is described; electric circuit construction is emphasized. (10 figures, 4 tables)

  20. Switzerland's electricity supply industry

    International Nuclear Information System (INIS)

    Inwyler, Ch.

    1980-01-01

    After a short description of Switzerland's electricity supply industry, the author comments on the production and consumption of electrical energy as well as on Switzerland's role within the European grid. A brief survey of electricity supply as a service is followed by a discussion of the political tools (such as e.g. the referendum, the hearing procedure etc.), which are an essential clue for understanding the position of the electricity supply industry in Switzerland. (Auth.)

  1. Interoperable Cloud Networking for intelligent power supply; Interoperables Cloud Networking fuer intelligente Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Dave [Invensys Operations Management, Foxboro, MA (United States)

    2010-09-15

    Intelligent power supply by a so-called Smart Grid will make it possible to control consumption by market-based pricing and signals for load reduction. This necessitates that both the energy rates and the energy information are distributed reliably and in real time to automation systems in domestic and other buildings and in industrial plants over a wide geographic range and across the most varied grid infrastructures. Effective communication at this level of complexity necessitates computer and grid resources that are normally only available in the computer centers of big industries. The cloud computing technology, which is described here in some detail, has all features to provide reliability, interoperability and efficiency for large-scale smart grid applications, at lower cost than traditional computer centers. (orig.)

  2. Optimizing clinical trial supply requirements: simulation of computer-controlled supply chain management.

    Science.gov (United States)

    Peterson, Magnus; Byrom, Bill; Dowlman, Nikki; McEntegart, Damian

    2004-01-01

    Computer-controlled systems are commonly used in clinical trials to control dispensing and manage site inventories of trial supplies. Typically such systems are used with an interactive telephone or web system that provide an interface with the study site. Realizing the maximum savings in medication associated with this approach has, in the past, been problematic as it has been difficult to fully estimate medication requirements due to the complexities of these algorithms and the inherent variation in the clinical trial recruitment process. We describe the traditional and automated methods of supplying sites. We detail a simulation approach that models the automated system. We design a number of simulation experiments using this model to investigate the supply strategy properties that influence medication overage and other strategy performance metrics. The computer-controlled medication system gave superior performance to the traditional method. In one example, a 75% overage of wasted medication in the traditional system was associated with higher supply failure than an automated system strategy with an overage of 47%. In a further example, we demonstrate that the impact of using a country stratified as opposed to site stratified scheme affects the number of deliveries and probability of supply failures more than the amount of drug wasted with respective increases of 20, 2300 and 4%. Medication savings with automated systems are particularly significant in repeat dispensing designs. We show that the number of packs required can fall by as much as 50% if one uses a predictive medication algorithm. We conclude that a computer-controlled supply chain enables medication savings to be realized and that it is possible to quantify the distribution of these savings using a simulation model. The simulation model can be used to optimize the prestudy medication supply strategy and for midstudy monitoring using real-time data contained in the study database.

  3. The Supply of Medical Radioisotopes. An Economic Study of the Molybdenum-99 Supply Chain

    International Nuclear Information System (INIS)

    2010-01-01

    The reliable supply of molybdenum-99 (Mo-99) and its decay product, technetium-99m (Tc-99m), is a vital component of modern medical diagnostic practices. Disruptions in the supply chain of these radioisotopes - which cannot be effectively stored - can suspend important medical testing services. Unfortunately, supply reliability has declined over the past decade, due to unexpected or extended shutdowns at the few ageing, Mo-99 producing, research reactors and processing facilities. These shutdowns have created global supply shortages. The full study offers a unique analysis of the economic structure and present state of the Mo-99/Tc-99m supply chain. It finds that the shortages are a symptom of a longer-term problem linked to insufficient capital investment, which has been brought about by an economic structure that does not provide sufficient remuneration for producing Mo-99 or support for developing additional production and processing infrastructure. To assist governments and other decision makers in their efforts to ensure long-term, reliable supply of these important medical isotopes, the study presents options for creating a sustainable economic structure. The study will also enhance understanding amongst stakeholders of the costs of supplying Mo-99 and ultimately contribute to a better functioning market. (authors)

  4. Supply chain strategies, issues and models

    CERN Document Server

    Ramanathan, Ramakrishnan

    2014-01-01

    In the 21st century, supply chain operations and relationships among supply chain partners have become highly challenging, necessitating new approaches, e.g., the development of new models. Supply Chain Strategies, Issues and Models discusses supply chain issues and models with examples from actual industrial cases. Expert authors with a wide spectrum of knowledge working in various areas of supply chain management from various geographical locations offer refreshing, novel and insightful ideas and address possible solutions using established theories and models. Supply Chain Strategies, Issues and Models features studies that have used mathematical modeling, statistical analyses and also descriptive qualitative studies. The chapters cover many relevant themes related to supply chains and logistics including supply chain complexity, information sharing, quality (six sigma), electronic Kanbans, inventory models, scheduling, purchasing and contracts. To facilitate easy reading, the chapters that deal with suppl...

  5. Management Accounting and Supply Chain Strategy

    OpenAIRE

    Hald, Kim S.; Thrane, Sof

    2016-01-01

    Research positioned in the intersection between management accounting and supply chain management is increasing. However, the relationship between management accounting and supply chain strategies has been neglected in extant research. This research adds to literature on management accounting and supply chain management through exploring how supply chain strategy and management accounting is related, and how supply chain relationship structure modifies this relation. Building on a contingency...

  6. Supply Chain Management In Construction Revealed

    OpenAIRE

    Dr. Ghaith Al-Werikat

    2017-01-01

    The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

  7. Potential for deserts to supply reliable renewable electric power

    Science.gov (United States)

    Labordena, Mercè; Lilliestam, Johan

    2015-04-01

    To avoid dangerous climate change, the electricity systems must be decarbonized by mid-century. The world has sufficient renewable electricity resources for complete power sector decarbonization, but an expansion of renewables poses several challenges for the electricity systems. First, wind and solar PV power are intermittent and supply-controlled, making it difficult to securely integrate this fluctuating generation into the power systems. Consequently, power sources that are both renewable and dispatchable, such as biomass, hydro and concentrating solar power (CSP), are particularly important. Second, renewable power has a low power density and needs vast areas of land, which is problematic both due to cost reasons and due to land-use conflicts, in particular with agriculture. Renewable and dispatchable technologies that can be built in sparsely inhabited regions or on land with low competition with agriculture would therefore be especially valuable; this land-use competition greatly limits the potential for hydro and biomass electricity. Deserts, however, are precisely such low-competition land, and are at the same time the most suited places for CSP generation, but this option would necessitate long transmission lines from remote places in the deserts to the demand centers such as big cities. We therefore study the potential for fleets of CSP plants in the large deserts of the world to produce reliable and reasonable-cost renewable electricity for regions with high and/or rapidly increasing electricity demand and with a desert within or close to its borders. The regions in focus here are the European Union, North Africa and the Middle East, China and Australia. We conduct the analysis in three steps. First, we identify the best solar generation areas in the selected deserts using geographic information systems (GIS), and applying restrictions to minimize impact on biodiversity, soils, human heath, and land-use and land-cover change. Second, we identify

  8. Magnet power supply for ISABELLE

    International Nuclear Information System (INIS)

    Nawrocky, R.J.; Frankel, R.F.; Thomas, M.G.

    1979-01-01

    The power supply system which will energize the superconducting magnets in the ISABELLE machine consists of some 520 computer-programmable power supplies with outputs ranging from 50 A to 4500 A. Most of the power supplies will be used for the correction of field harmonics, orbit correction and adjustment of the machine working line. During acceleration, currents in various magnet correction coils will be controlled in real time to track the main field; all power supplies must be highly stable during the stacking and storage of the beam (in some cases current regulation must be in the order of 0.001%). PS reference programs will be stored in microprocessor based function generators embedded in each power supply. Due to the large amount of stored energy in the system, the magnets must be protected during quenches. Details of the power supply and of the magnet quench protection system are described

  9. Developing sustainable food supply chains.

    Science.gov (United States)

    Smith, B Gail

    2008-02-27

    This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

  10. Estimating Swedish biomass energy supply

    International Nuclear Information System (INIS)

    Johansson, J.; Lundqvist, U.

    1999-01-01

    Biomass is suggested to supply an increasing amount of energy in Sweden. There have been several studies estimating the potential supply of biomass energy, including that of the Swedish Energy Commission in 1995. The Energy Commission based its estimates of biomass supply on five other analyses which presented a wide variation in estimated future supply, in large part due to differing assumptions regarding important factors. In this paper, these studies are assessed, and the estimated potential biomass energy supplies are discusses regarding prices, technical progress and energy policy. The supply of logging residues depends on the demand for wood products and is limited by ecological, technological, and economic restrictions. The supply of stemwood from early thinning for energy and of straw from cereal and oil seed production is mainly dependent upon economic considerations. One major factor for the supply of willow and reed canary grass is the size of arable land projected to be not needed for food and fodder production. Future supply of biomass energy depends on energy prices and technical progress, both of which are driven by energy policy priorities. Biomass energy has to compete with other energy sources as well as with alternative uses of biomass such as forest products and food production. Technical progress may decrease the costs of biomass energy and thus increase the competitiveness. Economic instruments, including carbon taxes and subsidies, and allocation of research and development resources, are driven by energy policy goals and can change the competitiveness of biomass energy

  11. Managing the Global Supply Chain

    DEFF Research Database (Denmark)

    Skjøtt-Larsen, Tage; Schary, Philip B.; Mikkola, Juliana Hsuan

    The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...... well as current examples of best practice of managing supply chains in a global context....

  12. Managing the Global Supply Chain

    DEFF Research Database (Denmark)

    Hsuan, Juliana; Skjøtt-Larsen, Tage; Kinra, Aseem

    The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... well as current examples of best practice of managing supply chains in a global context....... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...

  13. Supply chain of perishables: how restaurants choose and relate with suppliers of vegetables

    Directory of Open Access Journals (Sweden)

    Gessuir Pigatto

    2017-08-01

    Full Text Available The increased meals outside has allowed the companies that offer the food service a increase in financial revenues, but increased the requirements for purchase of quality inputs. Thus, this article aims to analyze the perishables supply chain used by firms that operate in the food service, specifically the process of vegetables purchasing by small restaurants and their relationships with farming suppliers. Was utilized as analysis object, restaurants located in the northwestern regions of the State of São Paulo situated more than 600 km from the main supply vegetables center (CEAGESP. We chose a field research through data collection by semistructured questionnaires, applied in a personal interview with qualitative and quantitative data analysis. Although narrow, the relationship between the two chain links (restaurants and agricultural suppliers revealed to were positioned nearer to the market competitive than to the collaborative Market.

  14. Designing structural supply chain flexibility

    NARCIS (Netherlands)

    Mulinski, Ksawery Jan

    2012-01-01

    In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

  15. Supply Chain Management In Construction Revealed

    Directory of Open Access Journals (Sweden)

    Dr. Ghaith Al-Werikat

    2017-03-01

    Full Text Available The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

  16. Solar space heating for the Visitors Center, Stephens College, Columbia, Missouri

    Science.gov (United States)

    1980-01-01

    The solar energy system located at the Visitors' Center on the Stephens College Campus, Columbia, Missouri is discussed. The system is installed in a four-story, 15,000 square foot building. The solar energy system is an integral design of the building and utilizes 176 hydronic flat plate collectors which use a 50 percent water ethylene blycol solution and water-to-water heat exchanger. Solar heated water is stored in a 5,000 gallon water storage tank located in the basement equipment room. A natural gas fired hot water boiler supplies hot water when the solar energy heat supply fails to meet the demand. The designed solar contribution is 71 percent of the heating load.

  17. "Bullwhip Effect" in Supply Chains

    Directory of Open Access Journals (Sweden)

    Anđelko Ščukanec

    2007-09-01

    Full Text Available The system which connects all the elements between theproducer and the consumer is called the supply chain. This definitionof the supply chain shows its complexity, dynamics anduncertainty. Successful operation of supply chains requires thebest possible coordination of its elements, which obviously indicatesthe utmost importance of the information flow alongthem. The operation of supply chains on the whole has to bemore successful than the operation of their individual elements.It should be noted that such a complex process may give rise toa series of problems, unwanted events, as well as substantial reductionin profits and the level of service. One of such unwantedphenomena which may occur in the supply chain is the"bullwhip effect". This is a possible increase in the diversity oforders which occurs when we move along the elements of thesupply chain (from the customers' orders to the producers' orders.The work analyses the processes within the supply chainsand the occurrence of the bullwhip effect. The main causes ofthe bullwhip effect that we encounter daily in the supply chainshave been clearly defined. The paper also presents the mainnegative consequences of such a disturbance within the supplychains, and provides possible solutions for avoiding the bullwhipeffect.

  18. ENDOGENEITY OF INDONESIAN MONEY SUPPLY

    OpenAIRE

    Rachma, Meutia Safrina

    2011-01-01

    There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

  19. Endogeneity Of Indonesian Money Supply

    OpenAIRE

    Rachma, Meutia Safrina

    2010-01-01

    There has been a long debate about the endogeneity of money supply. The main objective of this article is to identify whether money supply in Indonesia is an exogenous or an endogenous variable. Using a Vector Autoregressive model and monthly data 1997(5)-2010(6), the estimation result shows that money supply in Indonesia is an endogenous variable. The movement of broad money supply does influence the movement of base money and Consumer Price Index. Consequently, the central bank does not hav...

  20. Governance In Project Configured Supply Chains

    DEFF Research Database (Denmark)

    Koch, Christian; Larsen, Casper Schultz; Gottlieb, Stefan Christoffer

    2006-01-01

    are integrated knowledge, material, workforce and management subsystem deliveries (the building core produced of pre-cast concrete, the elevator supply and the kitchen supply). Further 17 deliveries draws on more than 50 materials and component suppliers. The case project generated 160 failures over three months......This case study covers a Danish architectural, engineering and construction supply network for a specific building project. Failures in supply are used as indicators of the governance forms employed. The following governance forms are present; internal integration and hierarchy, SCM......-efforts, subsystem deliveries and contracting per project. The case exhibits a very uneven integration upstream: Three engineering design areas are integrated with production and the client function. Amongst supplies, the architectural design is the most 'clean-cut' knowledge supply, whereas the supplies...

  1. RE-SUPPLY: Securing the supply chains of wind power and solar PV Securing the supply chain for renewable energy. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lehner, Franz; Vuille, Francois; Ziem, Sabine [E4tech UK Ltd, London (United Kingdom); Rastogi, Ankur; Sengupta, Subhabrata [Avalon Consulting, Mumbai (India)

    2012-11-15

    The RE-SUPPLY project aimed to provide insight into the elements of the supply chains which are presently or can in the future evolve as critical constraints in further large-scale deployment of on- and offshore wind and solar photovoltaic energy. The objectives of the study were twofold: Risk assessment: identify potential bottlenecks in the supply chains of wind and PV and assess their criticality and timeline for occurrence; and, Risk management: identify suitable mitigation strategies and recommend specific actions at policy and industry level.

  2. Perspectives of electricity supply

    International Nuclear Information System (INIS)

    1988-01-01

    The 7 papers read at the symposium discussed the following subjects: Effects of the CO 2 problems of fossil energy systems on the world climate; status and perspectives of the German electricity industry in terms of competitiveness; The European electricity market and the integrated power supply system; Power supply without nuclear power; Costs and rates for households and other customers; Renewable energy sources and their contribution to energy supply in the Federal Republic of Germany; Electricity utilities as service partners. (UA) [de

  3. A Study on stabilization of energy supply and demand using foreign futures market

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Won Chul; Lee, Sung Keun [Korea Energy Economics Institute, Euiwang (Korea)

    1999-02-01

    This study seeks to minimize financial cost related to the price stabilization and the supply and demand stabilization. In order to accomplish this, it derives a theoretical model of supply hedging to minimize fluctuation risk of price and financial cost intended for crude oil and LNG. Through the positive analysis based on this, it analyzes quantitatively the economic effect of utilizing foreign futures market. It shows the decline of average and divergence of supply cost. Despite the economic effect of utilizing a futures market, the degree of utilizing energy futures market of related firms in Korea appeared to be insufficient. To raise the utilization of trading in futures, the followings were suggested. Firstly, cost reduction and sharing relating information can be designed through the joint participation among allied enterprises. Secondly, energy futures transaction center in Korea can be established or trading linkage based on the existing international trading system can be built. Thirdly, it is possible to subsidize related cost by making a loan from trading in futures. Lastly, the participating directly in a futures market at government level can be considered. (author). 61 refs., 57 figs., 22 tabs.

  4. Levels & Barriers to Supply Chain Integration: A conceptual model of Supply Chain Performance

    OpenAIRE

    RajaIrfan Sabir; Muhammad Irfan

    2014-01-01

    In modern business scenario Supply chain has become the back bone for every business organization. All supply chain partners are joined together in value delivery network of company that no one can perform better without support of other. The ultimate objective of this cohesive relationship is to deliver value to customers and gets desired state of customer satisfaction & loyalty for the organization. For this purpose it is necessary to integrate the internal and external partners of Supply c...

  5. The Financial Supply Chain Management: a New Solution for Supply Chain Resilience

    Directory of Open Access Journals (Sweden)

    Virgil Popa

    2013-02-01

    Full Text Available In the present article, the author aims to find solutions to optimize the supply chain for the cash flow – a flow of products reversed from the physical one and the two-ways flow of information. In the last 15-20 years, academics and practitioners were oriented towards increasing the speed, cost reduction on supply chain material’s flow, oriented towards 3RP (3 Resource Planning logistics solutions and management solutions such as outsourcing or collaborative management. In terms of information flow, there has been a real revolution with the rise of the Internet and information technology standards introduced by the VICS (Voluntary Interindustry Commerce Standards, CSCMP (Council of Supply Chain Management Professionals, SCC (Supply Chain Council şi ECR Europe (Efficient Consumer Respons. The objective of this paper is to identify new ways of working together on supply chain financial flows. Methods used are the documentation in the literature and the practices of transnational companies under recession. Results refer to the identification of new solutions such as reverse factoring. A comparative analysis regarding the european and national regulations gets us to the conclusion that Romania is still tributary to traditional commercial credit. We propose that the Collaborative management, as a modus vivendi in a globalized and super computerized world, must be included within all Romanian organizations life, within the Supply Chain, but also those which are 3PL (Third Part Logistics and 4PL (Four Part Logistics organizations, where not only information services are included, but also financial services (banks and specialized financial institutions.

  6. Coordinated supply chain dynamic production planning model

    Science.gov (United States)

    Chandra, Charu; Grabis, Janis

    2001-10-01

    Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

  7. Supply Chain Visibility with Linked Open Data for Supply Chain Risk Analysis

    NARCIS (Netherlands)

    Hofman, W.J.

    2011-01-01

    Current customs applications are declaration based to support the various customs procedures based on (inter)national laws and regulations. To be able to perform a proper supply chain risk analysis, customs requires to have all data in supply chains. The current declaration procedures are not

  8. A quantitative study of the U.S. wood pallet industry based on supply chain management practices

    Science.gov (United States)

    Henry Quesada-Pineda; Scarlett Sanchez-Gomez; Philip A. Araman

    2012-01-01

    Pallets play an important role in the movement of goods from place to place. They are not only used in warehouses or distribution centers, but also in all those activities that require an efficient and effective method of transportation. To better understand business practices and external factors that impacts supply chain management (SCM), a survey of 1,500 U.S. wood...

  9. Supply reliability and dynamic safety analysis of an alternative energy supply chain

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Markert, Frank; Jacobsen, Peter

    2016-01-01

    This paper focuses on the integration of risk and supply chain modelling by means of analysing a case concerning a Hydrogen Refuelling Station in Berlin. It presents a framework that can analyse an energy supply chain and at the same time enables easy reporting and presentation of various results...... by utilizing Dis-crete Event Simulation (DES). The industrial implication of this work is to provide practitioners with an anal-ysis framework for improved decision support. The novelty of this paper is the approach to model a supply chain together with a dynamically modelled event tree-based approach...

  10. 7 CFR 3016.33 - Supplies.

    Science.gov (United States)

    2010-01-01

    ... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 7 Agriculture 15 2010-01-01 2010-01-01 false Supplies. 3016.33 Section 3016.33 Agriculture... GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 3016.33 Supplies. (a) Title. Title to...

  11. Uranium producer region of Lagoa Real, Brazil. Guarantee of supply of uranium concentrated (DUA) for the brazilian needs

    International Nuclear Information System (INIS)

    Matos, Evandro Carele de; Franco, Jamyle Praxedes

    2008-01-01

    This work focus at the Uranium Province of Lagoa Real, notably considering the geological reserves of uranium already defined (100,000 tones of U 3 O 8 ) and the respective autonomy in providing raw material needed for making fuel elements. The province, based on geo economical parameters, supported by three main vectors (geological model/grade, mining/process route, investment/finance) has been elected to supply the required brazilian demand. Supplying of uranium for the brazilian power plants is in charge of Industrias Nucleares do Brasil - INB and is based on national production. Thus the Industrial Complex of Caetite has been implemented in the state of Bahia, aiming primarily to supply the needs of Angra 1 and Angra 2 power plants. This new production center has the capacity of producing up to 400 tones/yr. of U 3 O 8 . (author)

  12. Optics and photonics education centers of excellence: an opportunity for international collaboration

    Science.gov (United States)

    Hull, Daniel M.

    2015-10-01

    The increased demand for highly educated and trained workers in optics and photonics is evident in many countries. Colleges and universities that provide this education can benefit greatly from support by non-profit National Education Centers of Excellence that conduct research in workforce needs, design curricula, develop industry-validated teaching materials, train new faculty and establish models for laser/optics laboratories. In 2006, the National Science Foundation (NSF) established OP-TEC, the National Center for Optics and Photonics Education, which encourages and supports U.S. colleges to educate and train an adequate supply of high quality technicians to meet the workforce demand by companies, institutions and government agencies. In 2013 and 2014 NSF awarded grants to establish regional photonics centers in the southeast U.S. (LASER-TEC) and the Midwest (MPEC). These Centers work cooperatively with OP-TEC, sharing resources, teaching materials and best practices for colleges with photonics technician education programs. This successful "center organization plan" that has evolved could be adopted in other countries, and international cooperation could be established between similar Centers of Education in Photonics education.

  13. Particle supply and recovery device

    International Nuclear Information System (INIS)

    Yamada, Kimio; Okazaki, Takashi.

    1988-01-01

    This invention concerns a particle supply and recovery device suitable to the supply of fuels and exhaustion of reaction products in a tokamak device. The divertor chamber is divided into an inner side and an outer side, in which only the outer side is constituted as a tightly closed structure. Particles are supplied from the inside of main plasmas and exhausted from the outer side of the divertor chamber. In the divertor equilibrium arrangement, particles escaping from the main plasmas are conveyed mainly passing through the outer side scrape-off layer to the divertor chamber. The particle density is higher at the outer side and lower at the inner side of the scrape-off layer. By making the outer side as a tightly closed structure, the pressure is increased and the particle exhaustion efficiency is improved. Since the particle density is low in the inner scrape-layer, the particle supply efficiency to the main plasma is increased by supplying the particles from the inside. Further, particles ionized in the inner scrape-off layer are returned to the main plasma chamber and then supplied again since the inner divertor chamber is not closed. Accordingly, the particle supply efficiency can further be improved. (K.M.)

  14. Status quo of supply technology

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Shigeo

    1987-09-01

    Problems for gas supply function, activity of the Gas Association, and technological development mainly of the presented subjects are reported. According to the materials released by the Gas Associattion, demands for city gas by the 21st Century is expected to be rather high with 3.6% annual growth rate. It is premissed on an assumption that the superior quality of the city gas satisfying customer requirements would be further upgraded. The problems confronted by the supply function for this purpose are the pursuit for less cost, improvement in security, and stable gas supply. The Gas Association carried out research, investigation, preparation of standards, etc., and published instructive materials such as guide for main and branch piping, guide for supply piping, technical standards for gas related works, etc. It also has been endeavoring to popularize the use of polyethylene pipies, and studying the evaluation method for the renewal and repair of gas conduits and house regulator supply system, etc. The supply function has been working on the cutting dowm of costs, inprovement in security, and developing technologies such as underground probing radar, inteligent pipe locator, identifier for gas and water supply tubes, estimation of ground subsidence, inspection of inside of pipes by a television camera, etc. (1 tab)

  15. 28 CFR 66.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... is a residual inventory of unused supplies exceeding $5,000 in total aggregate fair market value upon... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Supplies. 66.33 Section 66.33 Judicial... Supplies. (a) The Omnibus Crime Control and Safe Streets Act of 1968, as amended, Public Law 90-351...

  16. 44 CFR 13.33 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Supplies. 13.33 Section 13.33... GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 13.33 Supplies. (a) Title. Title to...

  17. The Total Quality Management Implementation Plan of the DLA Office of Comptroller

    Science.gov (United States)

    1989-06-01

    throughout the private and public sectors . Since embracing the concept in March 1988, the Office of the Secretary of Defense has directed all Defense...those in the Military Departments and private sector . The establishment of the DLA Finance Center in Columbus, Ohio, will promote standardization of...process and customer. o Worksite amenities and Quality of Worklife elements. o Adoption of incentive programs under which employees share the

  18. 41 CFR 105-71.133 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Supplies. 105-71.133...-Award Requirements/Changes, Property, and Subawards § 105-71.133 Supplies. (a) Title. Title to supplies...

  19. SUPPLY CHAIN MANAGEMENT – KEY FACTORS

    OpenAIRE

    Magdalena Daniela DINU

    2014-01-01

    This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of bot...

  20. MASTERING SUPPLY CHAIN RISKS

    Directory of Open Access Journals (Sweden)

    Borut Jereb

    2012-11-01

    Full Text Available Risks in supply chains represent one of the major business issues today. Since every organizationstrives for success and uninterrupted operations, efficient supply chain risk management is crucial.During supply chain risk research at the Faculty of Logistics in Maribor (Slovenia some keyissues in the field were identified, the major being the lack of instruments which can make riskmanagement in an organization easier and more efficient. Consequently, a model which captures anddescribes risks in an organization and its supply chain was developed. It is in accordance with thegeneral risk management and supply chain security standards, the ISO 31000 and ISO 28000families. It also incorporates recent finding from the risk management field, especially from theviewpoint of segmenting of the public.The model described in this paper focuses on the risks itself by defining them by different keydimensions, so that risk management is simplified and can be undertaken in every supply chain andorganizations within them. Based on our mode and consequent practical research in actualorganizations, a freely accessible risk catalog has been assembled and published online from the risksthat have been identified so far. This catalog can serve as a checklist and a starting point in supplychain risk management in organizations. It also incorporates experts from the field into a community,in order to assemble an ever growing list of possible risks and to provide insight into the model andits value in practice.

  1. An evaluation of the regional supply of biomass at three midwestern sites

    Energy Technology Data Exchange (ETDEWEB)

    English, B.C.; Dillivan, K.D.; Ojo, M.A.; Alexander, R.R. [Univ. of Tennessee, Knoxville, TN (United States); Graham, R.L. [Oak Ridge National Lab., TN (United States)

    1993-12-31

    Research has been conducted on both the agronomy and the conversion of biomass. However, few studies have been initiated that combine the knowledge of growing biomass with site specific resource availability information. An economic appraisal of how much biomass might be grown in a specific area for a given price has only just been initiated. This paper examines the economics of introducing biomass production to three midwest representative areas centered on the following counties, Orange County, Indiana; Olmsted County, Minnesota; and Cass County, North Dakota. Using a regional linear programming model, estimates of economic feasibility as well as environmental impacts are made. At a price of $53 per metric ton the biomass supplied to the plant gate is equal to 183,251 metric tons. At $62 per metric ton the biomass supply has increased to almost 1 million metric tons. The model predicts a maximum price of $88 per metric ton and at this price, 2,748,476 metric tons of biomass are produced.

  2. 29 CFR 97.33 - Supplies.

    Science.gov (United States)

    2010-07-01

    ... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 29 Labor 1 2010-07-01 2010-07-01 true Supplies. 97.33 Section 97.33 Labor Office of the Secretary... GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 97.33 Supplies. (a) Title. Title to...

  3. 43 CFR 12.73 - Supplies.

    Science.gov (United States)

    2010-10-01

    ... aggregate fair market value upon termination or completion of the award, and if the supplies are not needed... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Supplies. 12.73 Section 12.73 Public Lands... State and Local Governments Changes, Property, and Subawards § 12.73 Supplies. (a) Title. Title to...

  4. 10 CFR 218.11 - Supply orders.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Supply orders. 218.11 Section 218.11 Energy DEPARTMENT OF ENERGY OIL STANDBY MANDATORY INTERNATIONAL OIL ALLOCATION Supply Orders § 218.11 Supply orders. (a) A supply order shall require that the firm to which it is issued take actions specified therein relating to...

  5. 46 CFR 108.467 - Water supply.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Water supply. 108.467 Section 108.467 Shipping COAST... Fire Extinguishing Systems Foam Extinguishing Systems § 108.467 Water supply. The water supply of a foam extinguishing system must not be the water supply of the fire main system on the unit unless when...

  6. Supply reliability and dynamic safety analysis of an alternative energy supply chain

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Markert, Frank; Jacobsen, Peter

    2016-01-01

    This paper focuses on the integration of risk and supply chain modelling by means of analysing a case concerning a Hydrogen Refuelling Station in Berlin. It presents a framework that can analyse an energy supply chain and at the same time enables easy reporting and presentation of various results...

  7. THE COSTS OF ENERGY SUPPLY SECURITY

    Energy Technology Data Exchange (ETDEWEB)

    Rogner, H.H.; Langlois, L.M.; McDonald, A.; Weisser, D.; Howells, M.

    2007-07-01

    In general, increasing a country's energy supply security does not come for free. It costs money to build up a strategic reserve, to increase supply diversity or even to accelerate energy efficiency improvements. Nor are all investments in increasing energy supply security cost effective, even if the shocks they are designed to insure against can be predicted with 100% accuracy. The first half of the paper surveys different definitions and strategies associated with the concept of energy supply security, and compares current initiatives to establish an 'assured supply of nuclear fuel' to the International Energy Agency's (IEA's) system of strategic national oil reserves. The second half of the paper presents results from several case studies of the costs and effectiveness of selected energy supply security policies. One case study examines alternative strategies for Lithuania following the scheduled closure of the Ignalina-2 nuclear reactor in 2009. The second case study examines, for countries with different energy resources and demand structures, the effectiveness of a policy to increase supply diversity by expanding renewable energy supplies. (auth)

  8. CHALLENGES OF SUPPLY CHAIN MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Natalia GALANTON

    2017-11-01

    Full Text Available The present article highlights the basic characteristics of the supply chain, specific to changes in the business environment of companies at the beginning of the 21st century. Supply chain activities turn natural resources, raw materials and components into a finished product, which is then delivered to the final customer. The supply chain incorporates the production process alongside the raw material acquisition and distribution of finished products, encompassing all the existing process responsible for transforming the materials taken from the supplier to the finished products delivered to customers. Today, competitiveness and performance of an organization are dependent on belonging to an efficient and effective supply-delivery chain where synergies exist due to the establishment and implementation of common goals and strategies by partners. Competition does not take place between independent organizations or between small groups of organizations, but between supply and delivery chains, made up of interconnected networks of producers, distributors and logistics providers. Under these circumstances, supply chain managers must seek solutions to respond promptly to the most important challenges in the field.

  9. Ethane supply and demand

    International Nuclear Information System (INIS)

    Jamerson, J.B.

    1993-01-01

    Estimates are given for ethane production, chiefly from the Gulf Coast area. Increase in interregional transfers are predicted. Comparisons from 1992 through 1995 are made. The author concludes the following: ethane will be supply limited over the decade of the 90's; values will be over competing feedstocks; minimum practical demands will be close to available supply; regional relationships will reflect pipeline tariffs; purity ethane/EP spreads may narrow with new Mt. Belvieu fractionation capacity; new domestic supplies will back out imports; and Ethane's share of ethylene production may drop over the period

  10. Uranium supply and demand

    International Nuclear Information System (INIS)

    1984-05-01

    This report covers the period 1983 to 1995. It draws together the industry's latest views on future trends in supply and demand, and sets them in their historical context. It devotes less discussion than its predecessors to the technical influences underpinning the Institute's supply and demand forecasts, and more to the factors which influence the market behaviour of the industry's various participants. As the last decade has clearly shown, these latter influences can easily be overlooked when undue attention is given to physical imbalances between supply and demand. (author)

  11. Nevada test site water-supply wells

    International Nuclear Information System (INIS)

    Gillespie, D.; Donithan, D.; Seaber, P.

    1996-05-01

    A total of 15 water-supply wells are currently being used at the Nevada Test Site (NTS). The purpose of this report is to bring together the information gleaned from investigations of these water-supply wells. This report should serve as a reference on well construction and completion, static water levels, lithologic and hydrologic characteristics of aquifers penetrated, and general water quality of water-supply wells at the NTS. Possible sources for contamination of the water-supply wells are also evaluated. Existing wells and underground nuclear tests conducted near (within 25 meters (m)) or below the water table within 2 kilometers (km) of a water-supply were located and their hydrogeologic relationship to the water-supply well determined

  12. The Supply of Medical Radioisotopes An Economic Study of the Molybdenum-99 Supply Chain: Summary

    International Nuclear Information System (INIS)

    2010-01-01

    The reliable supply of molybdenum-99 (Mo-99) and its decay product, technetium-99m (Tc-99m), is a vital component of modern medical diagnostic practices. Disruptions in the supply chain of these radioisotopes - which cannot be effectively stored - can suspend important medical testing services. Unfortunately, supply reliability has declined over the past decade, due to unexpected or extended shutdowns at the few ageing, Mo-99 producing, research reactors and processing facilities. These shutdowns have created global supply shortages. The full study offers a unique analysis of the economic structure and present state of the Mo-99/Tc-99m supply chain. It finds that the shortages are a symptom of a longer-term problem linked to insufficient capital investment, which has been brought about by an economic structure that does not provide sufficient remuneration for producing Mo-99 or support for developing additional production and processing infrastructure. To assist governments and other decision makers in their efforts to ensure long-term, reliable supply of these important medical isotopes, the study presents options for creating a sustainable economic structure. The study will also enhance understanding amongst stakeholders of the costs of supplying Mo-99 and ultimately contribute to a better functioning market. (authors)

  13. Determining an optimal supply chain strategy

    Directory of Open Access Journals (Sweden)

    Intaher M. Ambe

    2012-11-01

    Full Text Available In today’s business environment, many companies want to become efficient and flexible, but have struggled, in part, because they have not been able to formulate optimal supply chain strategies. Often this is as a result of insufficient knowledge about the costs involved in maintaining supply chains and the impact of the supply chain on their operations. Hence, these companies find it difficult to manufacture at a competitive cost and respond quickly and reliably to market demand. Mismatched strategies are the root cause of the problems that plague supply chains, and supply-chain strategies based on a one-size-fits-all strategy often fail. The purpose of this article is to suggest instruments to determine an optimal supply chain strategy. This article, which is conceptual in nature, provides a review of current supply chain strategies and suggests a framework for determining an optimal strategy.

  14. The supply of non-renewable resources

    DEFF Research Database (Denmark)

    Daubanes, Julien Xavier; Lasserre, Pierre

    that the substitution effect always dominates: A price increase at some point in space and time causes NRR supply to decrease at all other points. This new but orthodox supply setting extends to NRRs the partial equilibrium analysis of demand and supply policies. Thereby, it provides a generalization of many results......There exists no formal treatment of non-renewable resource (NRR) supply, systematically deriving quantity as function of price. We establish instantaneous restricted (fixed reserves) and unrestricted NRR supply functions. The supply of a NRR at any date and location not only depends on the local...... contemporary price of the resource but also on prices at all other dates and locations. Besides the usual law of supply, which characterizes the own-price effect, cross-price effects have their own law. They can be decomposed into a substitution effect and a stock compensation effect. We show...

  15. Stochastic production planning for a biofuel supply chain under demand and price uncertainties

    International Nuclear Information System (INIS)

    Awudu, Iddrisu; Zhang, Jun

    2013-01-01

    Highlights: ► The proposed stochastic model outperforms the deterministic model. ► The price of biofuel is modeled as Geometric Brownian Motion (GBM). ► The proposed model can be applied in any biofuel supply chain. -- Abstract: In this paper, we propose a stochastic production planning model for a biofuel supply chain under demand and price uncertainties. The supply chain consists of biomass suppliers, biofuel refinery plants and distribution centers. A stochastic linear programming model is proposed within a single-period planning framework to maximize the expected profit. Decisions such as the amount of raw materials purchased, the amount of raw materials consumed and the amount of products produced are considered. Demands of end products are uncertain with known probability distributions. The prices of end products follow Geometric Brownian Motion (GBM). Benders decomposition (BD) with Monte Carlo simulation technique is applied to solve the proposed model. To demonstrate the effectiveness of the proposed stochastic model and the decomposition algorithm, a representative supply chain for an ethanol plant in North Dakota is considered. To investigate the results of the proposed model, a simulation framework is developed to compare the performances of deterministic model and proposed stochastic model. The results from the simulation indicate the proposed model obtain higher expected profit than the deterministic model under different uncertainty settings. Sensitivity analyses are performed to gain management insight on how profit changes due to the uncertainties affect the model developed.

  16. Supply of nuclear materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-07-15

    Any large-scale atomic energy programme is inherently dependent on the availability of materials that can be used as fuel in reactors, and the International Atomic Energy Agency, at its inception, was intended to act as a bank for the flow of materials between Member States. According to its Statute, one of its primary functions is to provide materials 'to meet the needs of research on, and development and practical application of, atomic energy for peaceful purposes, including the production of electric power, with due consideration for the needs of the under-developed areas of the world'. If the Agency is to fulfil its Statutory function, it would be essential for it to have not only some ready sources of supply, but also an established framework of general terms and conditions on which it could secure the supplies. The latter would eliminate the need for going through elaborate procedural formalities whenever the Agency receives a new request for materials. Such a framework has now been established with the signing of broad agreements with three countries which had offered to supply various quantities of special fissionable materials to the Agency. These agreements, signed in Vienna on 11 May 1959, with the USSR, the UK and the USA, lay down the basic terms and conditions on which these three countries will make nuclear materials available when needed by the Agency. The USSR has agreed to make available to the Agency 50 kg of uranium-235, the UK 20 kg and the USA 5 000 kg. The material will be supplied in the form of enriched uranium in any concentration up to 20 per cent; the amounts mentioned relate to the 235-isotope content of the materials. The UK and the USA have agreed that the parties to a particular supply agreement may decide on higher enrichment of uranium to be used for research reactors, material testing reactors or for other research purposes. The USA has also agreed to make available to the Agency such additional supplies as would match in amount

  17. Use of the water supply system of special purpose in buildings

    Directory of Open Access Journals (Sweden)

    Orlov Evgeniy Vladimirovich

    Full Text Available A water supply system of a special purpose is a necessary element in hot and cold shops of the industrial enterprises, office buildings and the medical centers, and also other rooms. The water supply systems of a special purpose, which give subsalty, sparkling water and water sated with oxygen, allow people to prevent, for example, strong dehydration of an organism, which is possible at big losses of water, especially in case of the people working in hot shops. Various elements of special drinking water supply system are given in the article, their main functions are described. Different types of the water folding devices pumping water to consumers, one of which is drinking fountain, are considered. Possible systems of water filtration, which can be established for quality improvement, are transferred. Among them the great role is played by membrane technologies and the return osmosis, which is widely applied now. Today there is a possibility of construction, both the centralized water supply system of a special purpose, and local. Besides, the least is a more preferable option taking into account capital expenditure for construction and operation, and also it can lead to solid resource-saving as a result of the electric energy saving going for water heating in heaters. Automatic machines of drinking water for a local water supply system of a special purpose have indisputable advantages. They are capable to carry out several functions at the same time, and also to distribute water to consumers. It allows placing all the necessary equipment, which will be well in harmony with the environment in their small and compact case, and will fit into any difficult interior of the room. Also they are very easily connected to the systems of an internal water supply system by means of a propylene tube that allows to change their sposition in space and to transfer to any place of the room with fast installation of equipment. Also the ecological effect was

  18. Editorial: Supply Chain Management

    Directory of Open Access Journals (Sweden)

    Aidonis, D.

    2012-01-01

    Full Text Available This special issue has followed up the 2nd Olympus International Conference on Supply Chains held on October 5-6, 2012, in Katerini, Greece. The Conference was organized by the Department of Logistics of Alexander Technological Educational Institution (ATEI of Thessaloniki, in collaboration with the Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH. During the 2-Days Conference more than 50 research papers were presented covering the following thematic areas: (i Business Logistics, (ii Transportation, Telematics and Distribution Networks, (iii Green Logistics, (iv Information and Communication Technologies in Supply Chain Management, and (v Services and Quality. Three keynote invited speakers addressed interesting issues for the Humanitarian Logistics, Green Supply Chains of the Agrifood Sector and the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

  19. The role of the supply chain executive in supply chain integration: a behavioral approach

    OpenAIRE

    ELENA REVILLA; LUIS GOMEZ - MEJIA

    2008-01-01

    Applying a behavioural approach of agency theory, this paper aimed to identify the most appropriate employment and compensation system (ECS) for supply chain executives in order to foster supply chain integration. We attempted to develop a novel approach of how encourages supply chain integration from the perspective of managerial incentives, an enabler that has not been analyzed in the literature. The paper presents the analysis of three sources of risk bearing - compensation risk, employmen...

  20. Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

    OpenAIRE

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply n...

  1. Optimal transport on supply-demand networks.

    Science.gov (United States)

    Chen, Yu-Han; Wang, Bing-Hong; Zhao, Li-Chao; Zhou, Changsong; Zhou, Tao

    2010-06-01

    In the literature, transport networks are usually treated as homogeneous networks, that is, every node has the same function, simultaneously providing and requiring resources. However, some real networks, such as power grids and supply chain networks, show a far different scenario in which nodes are classified into two categories: supply nodes provide some kinds of services, while demand nodes require them. In this paper, we propose a general transport model for these supply-demand networks, associated with a criterion to quantify their transport capacities. In a supply-demand network with heterogeneous degree distribution, its transport capacity strongly depends on the locations of supply nodes. We therefore design a simulated annealing algorithm to find the near optimal configuration of supply nodes, which remarkably enhances the transport capacity compared with a random configuration and outperforms the degree target algorithm, the betweenness target algorithm, and the greedy method. This work provides a start point for systematically analyzing and optimizing transport dynamics on supply-demand networks.

  2. Understanding the supply chain

    Directory of Open Access Journals (Sweden)

    Aćimović Slobodan

    2006-01-01

    Full Text Available Supply chain management represents new business philosophy and includes strategically positioned and much wider scope of activity in comparison with its "older brother" - management of logistics. Philosophy of the concept of supply chain is directed to more coordination of key business functions of every link in distribution chain in the process of organization of the flow of both goods and information, while logistic managing instruments are focused on internal optimum of flows of goods and information within one company. Applying the concept of integrated supply chain among several companies makes the importance of operative logistics activity even greater on the level of one company, thus advancing processes of optimum and coordination within and between different companies and confirms the importance of logistics performances for the company’s profitability. Besides the fact that the borders between companies are being deleted, this concept of supply chain in one distribution channel influences increasing of importance of functional, i.e. traditional business managing approaches but instead it points out the importance of process managing approaches. Although the author is aware that "there is nothing harder, more dangerous and with uncertain success, but to find a way for introducing some novelties (Machiavelli, it would be even his additional stimulation for trying to bring closer the concept and goals of supply chain implementation that are identified in key, relevant, modern, theoretical and consulting approaches in order to achieve better understanding of the subject and faster implementation of the concept of supply chain management by domestic companies.

  3. High Input Voltage Discharge Supply for High Power Hall Thrusters Using Silicon Carbide Devices

    Science.gov (United States)

    Pinero, Luis R.; Scheidegger, Robert J.; Aulsio, Michael V.; Birchenough, Arthur G.

    2014-01-01

    A power processing unit for a 15 kW Hall thruster is under development at NASA Glenn Research Center. The unit produces up to 400 VDC with two parallel 7.5 kW discharge modules that operate from a 300 VDC nominal input voltage. Silicon carbide MOSFETs and diodes were used in this design because they were the best choice to handle the high voltage stress while delivering high efficiency and low specific mass. Efficiencies in excess of 97 percent were demonstrated during integration testing with the NASA-300M 20 kW Hall thruster. Electromagnet, cathode keeper, and heater supplies were also developed and will be integrated with the discharge supply into a vacuum-rated brassboard power processing unit with full flight functionality. This design could be evolved into a flight unit for future missions that requires high power electric propulsion.

  4. Flexibility evaluation of multiechelon supply chains.

    Science.gov (United States)

    Almeida, João Flávio de Freitas; Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

    2018-01-01

    Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

  5. Siting studies for an asymptotic U.S. energy supply system based primarily on nuclear energy

    International Nuclear Information System (INIS)

    Burwell, C.C.

    1977-01-01

    The nuclear energy center (NEC) concept is an approach to siting wherein nuclear facilities would be clustered in and delimited to a relatively small number of locations throughout the United States. These designated centers would be concurrently developed to their full capability over several decades, at which time, they would be several times larger than the largest nuclear power stations in existence today. The centers would be permanently dedicated to nuclear operations including the future decommissioning of functionally obsolescent facilities as well as the commissioning of their replacements. The criteria for and characteristics of an acceptable nuclear energy system that could supply most of the U.S. energy requirements in the distant future are discussed. The time period is unspecified but occurs when fossil-fuel resources are depleted to such an extent that their use is economic only in special situations, and is not economic, in general, for use as fuel

  6. Sediment supply to beaches

    DEFF Research Database (Denmark)

    Aagaard, Troels

    2014-01-01

    Many beaches have been built by an onshore supply of sand from the shoreface, and future long-term coastal evolution critically depends on cross-shore sediment exchange between the upper and the lower shorefaces. Even so, cross-shore sediment supply remains poorly known in quantitative terms...... and this reduces confidence in predictions of long-term shoreline change. In this paper, field measurements of suspended sediment load and cross-shore transport on the lower shoreface are used to derive a model for sediment supply from the lower to the upper shoreface at large spatial and temporal scales. Data...

  7. INTEGRATED AUTOMOTIVE MANUFACTURING SUPPLY

    Directory of Open Access Journals (Sweden)

    P.J.S. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Supply planning and traffic flow planning are major activities in the automotive manufacturing environment worldwide. Traditionally, the impact of supply planning strategies on plant traffic is rarely considered. This paper describes the development of a Decision Support System (DSS that will assist automotive manufacturers to analyse the effect of supply planning decisions on plant traffic during the supply planning phase of their logistics planning process. In essence, this DSS consists of a Supply Medium Decision Support Tool (SMDST (an interactive MS-Excel model with Visual Basic interfacing and a traffic flow simulation model tool (using eMPlant simulation software.

    AFRIKAANSE OPSOMMING: Verskaffingsbeplanning en verkeersvloeibeplanning is belangrike aktiwiteite in die motorvervaardigingsbedryf wêreldwyd. Tradisioneel word die uitwerking van verskaffings-beplanningsstrategië op aanlegverkeer selde in ag geneem. Hierdie artikel beskryf die ontwikkeling van ’n Besluitnemings Ondersteuningstelsel (DSS wat motorvervaardigers sal ondersteun in die analise van die effek van verskaffingsbeplanningbesluite op aanlegverkeer tydens die verskaffingsbeplanningsfase van hulle logistieke beplanningsproses. Hierdie DSS bestaan hoofsaaklik uit ’n Verskaffings-vervoermiddel Besluitnemingshulpmiddel (SMDST (’n interaktiewe MS-Excel model met “Visual Basic” koppelling asook ’n simulasiemodel van verkeersvloei (met eM-Plant simulasiesagteware.

  8. Electricity supply for remote places in the Danube Delta using non-conventional sources of energy

    International Nuclear Information System (INIS)

    Zaides, E.P.

    1993-06-01

    The results of the theoretical studies and experiments performed by the author during the last years, the testing of the technical solutions based on PV and wind turbines, are the premises which allow the start of a new project regarding the electricity supply for remote places in the Danube Delta using non-conventional sources of energy. The aim of the project is to supply electricity to remote places such as: schools, medical centers, telecommunications, data logging equipment for floods preventing. The technical solutions envisage the design of a hybrid systems based on PVs and WTs. The paper emphasizes the elements of progress, the general concept of the design and is looking forward to raise the interest of other research teams which might take part into such project. (author). 7 refs, 11 figs, 3 tabs

  9. Petroleum supply monthly, April 1990

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  10. Forecasting world natural gas supply

    International Nuclear Information System (INIS)

    Al-Fattah, S. M.; Startzman, R. A.

    2000-01-01

    Using the multi-cyclic Hubert approach, a 53 country-specific gas supply model was developed which enables production forecasts for virtually all of the world's gas. Supply models for some organizations such as OPEC, non-OPEC and OECD were also developed and analyzed. Results of the modeling study indicate that the world's supply of natural gas will peak in 2014, followed by an annual decline at the rate of one per cent per year. North American gas production is reported to be currently at its peak with 29 Tcf/yr; Western Europe will reach its peak supply in 2002 with 12 Tcf. According to this forecast the main sources of natural gas supply in the future will be the countries of the former Soviet Union and the Middle East. Between them, they possess about 62 per cent of the world's ultimate recoverable natural gas (4,880 Tcf). It should be noted that these estimates do not include unconventional gas resulting from tight gas reservoirs, coalbed methane, gas shales and gas hydrates. These unconventional sources will undoubtedly play an important role in the gas supply in countries such as the United States and Canada. 18 refs., 2 tabs., 18 figs

  11. Overcoming SMEs Financing and Supply Chain Obstacles by Introducing Supply Chain Finance

    Directory of Open Access Journals (Sweden)

    Abbasi Waseem Ahmed

    2018-05-01

    Full Text Available Keeping in view the importance of small and medium enterprises (SMEs for the growth of a nation, we must also keep an eye on the challenges faced by those SMEs. There are various kinds of financing and supply chain options available for SMEs but they still face lot of hindrances. This paper would help us to understand why SMEs are important for the development of any country and how could we help the SMEs from facing challenges related to financing and supply chain. This study further highlights the key financing issues faced by SMEs and also focuses on major supply chain challenges confronted by the SMEs. This study put emphasis on the concept of supply chain finance (SCF and that how SCF could help SMEs to overcome those challenges. In addition, this paper also points out the benefits and prospects of SMEs. Even though the concept of SCF is still in developing phase but it has shown significant assistance to SMEs in order to grow further.

  12. Psychotropic drugs in Nepal: perceptions on use and supply chain management.

    Science.gov (United States)

    Upadhaya, Nawaraj; Jordans, Mark J D; Gurung, Dristy; Pokhrel, Ruja; Adhikari, Ramesh P; Komproe, Ivan H

    2018-01-24

    Psychotropic drugs play an important role in the treatment of mental, neurological and substance use disorders. Despite the advancement of the use of psycho-pharmaceuticals in the developed countries, the psychotropic drug production and supply chain management in low- and middle- income countries are still poorly developed. This study aims to explore the perceptions of stakeholders involved in all stages of the psychotropic drug supply chain about the need, quality, availability and effectiveness of psychotropic drugs, as well as barriers to their supply chain management. The study was conducted among 65 respondents from the Kathmandu, Chitwan and Pyuthan districts, grouped into four categories: producers, promoters and distributors (N = 22), policy makers and government actors (N = 8), service providers (N = 21) and service users/family members (N = 14). The respondents reported that psychotropic drugs, despite having side effects, are 1) needed, 2) available in major regional centers and 3) are effective for treating mental health problems. The stigma associated with mental illness, however, forces patients and family members to hide their use of psychotropic drugs. The study found that the process of psychotropic drug supply chain management is similar to other general drugs, with the exceptions of strict pre-approval process, quantity restriction (for production and import), and mandatory record keeping. Despite these regulatory provisions, respondents believed that the misuse of psychotropic drugs is widespread and companies are providing incentives to prescribers and retailers to retain their brand in the market. The production and supply chain management of psychotropic drugs is influenced by the vested interests of pharmaceutical companies, prescribers and pharmacists. In the context of the government of Nepal's policy of integrating mental health into primary health care and increased consumption of psychotropic drugs in Nepal, there is a

  13. Development of power supplies at VECC

    International Nuclear Information System (INIS)

    De, T.K.

    2005-01-01

    Large scale indigenous production of power supplies started at VECC since 1970. At a later stage, compact Superconducting Cyclotron demanded highly stable (of the order of 20 ppm) magnet power supplies to accommodate a large number of highly precise distributed beam trajectory in a smaller radial distance. Intensive quality development around the power supplies became essential. In-depth understanding of the power supply components, modules, computer based simulation, design, instrumentation, wide and long experience, all put together have contributed remarkable results leading to high quality indigenous development of power supply at VECC - a brief report has been presented in this paper. (author)

  14. The balance of supply and demand

    International Nuclear Information System (INIS)

    Darmayan, P.

    1981-01-01

    The Supply and Demand Committee of the Uranium Institute was established to monitor continuously information and developments bearing on the uranium market and to publish from time to time reports giving its views on the supply and demand outlook. The last Uranium Institute supply and demand report was compiled at the beginning of 1979. Its main conclusions were that from 1979 to 1990 the flexibilities of the market were such as to offer adequate scope to producers and consumers of uranium to ensure a balance between supply and demand. Is that conclusion still valid one and a half years later. Some of the Supply and Demand Committee's more recent estimates are reported under the headings: reactor orders and cancellations; revised Institute forecasts of nuclear capacity; uranium supply; main implications of the new forecasts. (U.K.)

  15. Supply chain design approaches for supply chain resilience: A qualitative study of South African fast-moving consumer goods grocery manufacturers

    Directory of Open Access Journals (Sweden)

    Assilah Agigi

    2016-10-01

    Full Text Available Orientation: In today’s globalised and complex business environment, firms are ever more vulnerable to supply chain disruptions, originating both internally and externally from the supply chain. Supply chain resilience minimises the impact of a disruption through design approaches, which allows the supply chain to respond appropriately to disruptive events. Research purpose: This article investigated the supply chain risks faced by grocery manufacturers in the South African fast-moving consumer goods (FMCG industry and explored supply chain design approaches that enable supply chain resilience. Motivation for the study: South African grocery manufacturers are faced with distinct risks. Whilst supply chain risk management studies have provided firms with certain guidelines to mitigate risk, supply chains are still vulnerable to unanticipated risks. Literature on supply chain resilience in the South African context is scant. The concept of supply chain resilience provides firms with strategies that are built into the supply chain that allow firms to react and recover swiftly from disruptions. Furthermore, supply chain resilience strategies assist firms in becoming less vulnerable to possible disruptions. Research design approach and method: This study was conducted by using a descriptive qualitative research design. Data were collected through semi-structured interviews with senior supply chain practitioners specifically within the South African FMCG grocery manufacturing industry. Main findings: The study found that labour unrest is the most common risk faced by the industry. Furthermore, strategic stock and supply chain mapping are of the most useful design approaches to enhance supply chain resilience. Practical/managerial implications: The study provides managers with new insights in guiding supply chain design decisions for resilient supply chains. Through the identification of risks and appropriate solutions linked to the various risks

  16. Optimal Power Cost Management Using Stored Energy in Data Centers

    OpenAIRE

    Urgaonkar, Rahul; Urgaonkar, Bhuvan; Neely, Michael J.; Sivasubramaniam, Anand

    2011-01-01

    Since the electricity bill of a data center constitutes a significant portion of its overall operational costs, reducing this has become important. We investigate cost reduction opportunities that arise by the use of uninterrupted power supply (UPS) units as energy storage devices. This represents a deviation from the usual use of these devices as mere transitional fail-over mechanisms between utility and captive sources such as diesel generators. We consider the problem of opportunistically ...

  17. Tuning magnet power supply

    International Nuclear Information System (INIS)

    Han, B.M.; Karady, G.G.; Thiessen, H.A.

    1989-01-01

    The particles in a Rapid Cycling Accelerator are accelerated by rf cavities, which are tuned by dc biased ferrite cores. The tuning is achieved by the regulation of bias current, which is produced by a power supply. The tuning magnet power supply utilizes a bridge circuit, supplied by a three phase rectifier. During the rise of the current, when the particles are accelerated, the current is controlled with precision by the bridge which operates a power amplifier. During the fall of the current, the bridge operates in a switching mode and recovers the energy stored in the ferrites. The recovered energy is stored in a capacitor bank. The bridge circuit is built with 150 power transistors. The drive, protection and control circuit were designed and built from commercial component. The system will be used for a rf cavity experiment in Los Alamos and will serve as a prototype tuning power supply for future accelerators. 1 ref., 7 figs

  18. Reactive power supply by distributed generators

    OpenAIRE

    Braun, M.

    2008-01-01

    Distributed reactive power supply is necessary in distribution networks for an optimized network operation. This paper presents first the reactive power supply capabilities of generators connected to the distribution network (distributed generators). In a second step an approach is proposed of determining the energy losses resulting from reactive power supply by distributed generators. The costs for compensating these losses represent the operational costs of reactive power supply. These cost...

  19. Business Case Analysis of the Walter Reed Army Medical Center Medical/Surgical Prime Vendor Generation III Service Level Electron Program

    National Research Council Canada - National Science Library

    Markot, Peter B

    2007-01-01

    ...) staffing and medical/surgical services offered under the Prime Vendor (PV) Generation III contract would provide the best supply chain management solution for Walter Reed Army Medical Center (WRAMC...

  20. Flexibility evaluation of multiechelon supply chains.

    Directory of Open Access Journals (Sweden)

    João Flávio de Freitas Almeida

    Full Text Available Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

  1. Wind turbine supply in Canada

    International Nuclear Information System (INIS)

    Snodin, H.

    2007-01-01

    This study reported on wind turbine supplies to the Canadian market. The report was written to address concerns for Canada's supply outlook in the near future due to the booming wind energy market. Turbine shortages have arisen as a result of continued growth in both European and North American markets. Long lead-times on turbine orders are now increasing the pressure to lock in turbine supply during the initial phases of the development process. Future growth of the wind energy industry will be impacted if turbine supply difficulties continue to contribute to uncertainties in the development process. The report provided an overview of the North American and global wind energy markets, as well as a summary of telephone interviews conducted with turbine suppliers. The implications for the future of turbine supply to the Canadian market were also analyzed. It was concluded that policy-makers should focus on supporting the expansion of manufacturing facilities for small wind turbines and control infrastructure in Canada 7 refs., 3 figs

  2. Aggregate Supply and Potential Output

    OpenAIRE

    Razin, Assaf

    2004-01-01

    The New-Keynesian aggregate supply derives from micro-foundations an inflation-dynamics model very much like the tradition in the monetary literature. Inflation is primarily affected by: (i) economic slack; (ii) expectations; (iii) supply shocks; and (iv) inflation persistence. This paper extends the New Keynesian aggregate supply relationship to include also fluctuations in potential output, as an additional determinant of the relationship. Implications for monetary rules and to the estimati...

  3. Gas markets and security of supply

    International Nuclear Information System (INIS)

    Gibot, G.

    1997-01-01

    In the natural gas business, some European states and companies seem to be concerned by security of supply. Security of supply for a governmental organisation is discussed, to share the author's conception and experience. The targets of a security of supply policy and the measures that can be set are described. The possible changes in implementing this policy are considered, according to recent developments in the field of gas security. The specificity of European gas markets justify the concern in security of supply, as concluded the Commission and the IEA. The integration of national gas markets in Europe will give new opportunities for managing this security of supply. (R.P.)

  4. Power supply design for Hadron Facility

    International Nuclear Information System (INIS)

    Karady, G.; Kansog, J.; Thiessen, H.A.; Schneider, E.

    1987-01-01

    Recently, a study investigated the feasibility of building a large 60 GeV, kaon factory accelerator. This paper presents the conceptual design of the magnet power supplies and energy storage system. In this study the following three systems were investigated: (a) power supply using storage generator; (b) power supply using inductive storage device; and (c) resonant power supplies. These systems were analyzed from both technical and economical points of view. It was found that all three systems are feasible and can be built using commercially available components. From a technical point of view, the system using inductive storage is the most advantageous. The resonant power supply is the most economical solution

  5. Progress in the blood supply of Afghanistan.

    Science.gov (United States)

    Riley, William J; McCullough, Terri Konstenius; Rhamani, Ahmad Masoud; McCullough, Jeffrey

    2017-07-01

    The blood supply system in Afghanistan was badly damaged by years of conflict. In 2009, the Afghanistan National Blood Safety and Transfusion Service (ANBSTS) was established. For 6 years, we collaborated to assist with policy and infrastructure development; blood bank operations; blood collection, testing, and component production; transfusion practices; and training of technicians, nurses, midwives, and physicians. Policies were established, infrastructure was strengthened, and capable staff was acquired and trained. Standard operating procedures were developed, testing was improved, and quality systems were established. Thirty trainings were held for blood center staff. Four additional formal trainings were held for 39 physicians, 36 nurses and/or midwives, and 38 laboratory technicians. During 5 years of this project, blood collection increased by 40%. The ANBSTS has made impressive progress developing infrastructure, personnel, procedures, quality systems, and training programs and increasing blood collection. Knowledge of transfusion medicine was improved through structured training. © 2017 AABB.

  6. Supplying the six. [Supplies of nuclear fuels and ores to the European Community

    Energy Technology Data Exchange (ETDEWEB)

    Oboussier, F

    1975-07-01

    Under the Euratom Treaty, the European Community must ensure that all users in the Community receive a regular and equitable supply of ores and nuclear fuels. Supply to users in the Community of ores, source materials, and special fissile materials is based on the principle of equal access of the users to the supply sources. To ensure such equal access, the Treaty prohibits all practices designed to secure a privileged position for certain users. In addition, an agency has been set up with two essential rights--that of an option on all ores, source materials, and special fissile materials produced in the territories of the Member States; and the exclusive right to conclude all contracts relating to the supply of ores, source materials, and special fissile materials coming from inside the Community or from outside. Dealings of the Agency with outside agencies, especially the former US AEC, are described. The uranium market and its economics and the availability of special fissile materials are summarized. (MCW)

  7. Conference Proceedings: The Quest for gas: tapping additional supplies for a growing market

    International Nuclear Information System (INIS)

    2000-01-01

    The two-day conference attracted 375 attendees from 19 U.S. states, 10 Canadian provinces and territories and several delegates from Europe. The conference reviewed the supply picture in Western Canada and the U.S., the market outlook with special reference to the robust electricity and industrial market, the outlook on gas prices and how the recent high prices impact on gas producers, royalty owners, industrial process users, the expansion of frontier gas, and competing sources of electrical generation, mainly existing coal and nuclear plants. The focus of the discussions centered on the so-called '30 Tcf vision' the recent National Petroleum Council Study in the United States. Further integration of the US and Canadian gas industry, primarily in the area of gas supply, was predicted. Evidence for this integration is the tremendous expansion of the role of frontier gas supplies from the Gulf of Mexico, LNG and coal seam gas in the USA and from the Scotian Shelf, the Liard Valley, north of the sixtieth parallel, Alaska's North Slope and Canada's Mackenzie Delta, to meet North American market demand. A resurgence in the role of large companies was also predicted, displacing the variety of independents, large and small, that have sprung up during the past decade

  8. Supply chain management and optimization in manufacturing

    CERN Document Server

    Pirim, Harun; Yilbas, Bekir Sami

    2014-01-01

    This book introduces general supply chain terminology particularly for novice readers, state of the art supply chain management and optimization issues and problems in manufacturing. The book provides insights for making supply chain decisions, planning and scheduling through supply chain network. It introduces optimization problems, i.e. transportation of raw materials, products and location, inventory of plants, warehouses and retailers, faced throughout the supply chain network.

  9. Reinforcement learning in supply chains.

    Science.gov (United States)

    Valluri, Annapurna; North, Michael J; Macal, Charles M

    2009-10-01

    Effective management of supply chains creates value and can strategically position companies. In practice, human beings have been found to be both surprisingly successful and disappointingly inept at managing supply chains. The related fields of cognitive psychology and artificial intelligence have postulated a variety of potential mechanisms to explain this behavior. One of the leading candidates is reinforcement learning. This paper applies agent-based modeling to investigate the comparative behavioral consequences of three simple reinforcement learning algorithms in a multi-stage supply chain. For the first time, our findings show that the specific algorithm that is employed can have dramatic effects on the results obtained. Reinforcement learning is found to be valuable in multi-stage supply chains with several learning agents, as independent agents can learn to coordinate their behavior. However, learning in multi-stage supply chains using these postulated approaches from cognitive psychology and artificial intelligence take extremely long time periods to achieve stability which raises questions about their ability to explain behavior in real supply chains. The fact that it takes thousands of periods for agents to learn in this simple multi-agent setting provides new evidence that real world decision makers are unlikely to be using strict reinforcement learning in practice.

  10. Power supply and stabilization of the supply system on board using decentralized voltage rectifiers

    Energy Technology Data Exchange (ETDEWEB)

    Grueb, W; Wegerer, K

    1987-04-01

    The functionally redundant power supply system of the Transrapid 06 II maglev train is described; it comprises four independent, battery-buffered networks and 30 linear generators per train section. Voltage rectifiers adapt the velocity- and load-dependent linear generator voltage to the 440 V d.c. networks and assure dynamic stabilisation as well as buffer battery loading. The result is a high-reliability power supply system on board with optimum utilisation of the power supplied by the linear generators while the train is running.

  11. Pengukuran Performansi Supply Chain Dengan Menggunakan Supply Chain Operation Reference (Scor) Berbasis Analytical Hierarchy Process (Ahp) Dan Objective Matrix (Omax)

    OpenAIRE

    Hanugrani, Nikita; Setyanto, Nasir Widha; Efranto, Remba Yanuar

    2013-01-01

    PT. Indonesian Tobacco merupakan salah satu Perusahaan rokok yang telah menerapkan konsep Supply Chain Management untuk mengatur proses aliran material. Selama berjalannya Supply Chain Management tersebut, Perusahaan belum pernah melakukan pengukuran terhadap performansi supply chain yang melibatkan semua pihak yang terkait. Metode yang digunakan untuk mengukur performansi supply chain adalah Supply Chain Operation Reference (SCOR). SCOR merupakan suatu model acuan proses untuk operasi supply...

  12. Molybdenum-99 supply: a global issue

    International Nuclear Information System (INIS)

    Cote, R.V.

    2011-01-01

    This article discusses the global supply of Molybdenum 99 used in nuclear medicine. Following a disruption in supplies of isotopes in the last few years, a Canadian expert panel assessed the most viable options for securing a sustainable supply of Technitium 99 over the medium to long term. The general recommendations were to strive for diversity and redundancy throughout the supply chain, leverage multi-use infrastructure, continue with international coordination and seek processing standardization within North America.

  13. Description of the surface water filtration and ozone treatment system at the Northeast Fishery Center

    Science.gov (United States)

    A water filtration and ozone disinfection system was installed at the U.S. Fish and Wildlife Service's Northeast Fishery Center in Lamar, Pennsylvania to treat a surface water supply that is used to culture sensitive and endangered fish. The treatment system first passes the surface water through dr...

  14. Information flow in the pharmaceutical supply chain.

    Science.gov (United States)

    Yousefi, Nazila; Alibabaei, Ahmad

    2015-01-01

    Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

  15. A concept for collaborative supply chain planning

    DEFF Research Database (Denmark)

    Alfnes, E.; Dreyer, H.C.; Hvolby, Hans-Henrik

    2012-01-01

    The main challenge for many manufacturers is the increased complexity of the supply chain, and as supply chains get more complicated enterprises require better tools for supply chain planning and execution. Many vendors offer systems to plan and control in-house operations, whereas mainly large...... vendors such as Oracle, SAP and I2 offer supply chain planning systems. This limits the ability for SMEs to exploit the supply chain planning options. This paper is part of a research project carried out to develop a new supply chain add-on for Microsoft AX, a very common system for SMEs. The paper...... discusses current supply chain planning solutions and presents a more simple and adaptive concept to be used in both SMEs and larger enterprises....

  16. Forecasting Ontario's blood supply and demand.

    Science.gov (United States)

    Drackley, Adam; Newbold, K Bruce; Paez, Antonio; Heddle, Nancy

    2012-02-01

    Given an aging population that requires increased medical care, an increasing number of deferrals from the donor pool, and a growing immigrant population that typically has lower donation rates, the purpose of this article is to forecast Ontario's blood supply and demand. We calculate age- and sex-specific donation and demand rates for blood supply based on 2008 data and project demand between 2008 and 2036 based on these rates and using population data from the Ontario Ministry of Finance. Results indicate that blood demand will outpace supply as early as 2012. For instance, while the total number of donations made by older cohorts is expected to increase in the coming years, the number of red blood cell (RBC) transfusions in the 70+ age group is forecasted grow from approximately 53% of all RBC transfusions in 2008 (209,515) in 2008 to 68% (546,996) by 2036. A series of alternate scenarios, including projections based on a 2% increase in supply per year and increased use of apheresis technology, delays supply shortfalls, but does not eliminate them without active management and/or multiple methods to increase supply and decrease demand. Predictions show that demand for blood products will outpace supply in the near future given current age- and sex-specific supply and demand rates. However, we note that the careful management of the blood supply by Canadian Blood Services, along with new medical techniques and the recruitment of new donors to the system, will remove future concerns. © 2012 American Association of Blood Banks.

  17. A new high current laboratory and pulsed homopolar generator power supply at the University of Texas

    Science.gov (United States)

    Floyd, J. E.; Aanstoos, T. A.

    1984-03-01

    The University of Texas at Austin is constructing a facility for research in pulse power technology for the Center for Electromechanics at the Balcones Research Center. The facility, designed to support high-current experiments, will be powered by six homopolar generators, each rated at 10 MJ and arranged to allow matching the requirements of resistive and inductive loads at various voltage and current combinations. Topics covered include the high bay, the power supply configuration and parameters, the speed and field control, and the magnetic circuit. Also considered are the removable air-cooled brushes, the water-cooled field coils, the hydraulic motor sizing and direct coupling, the low-impedance removable field coils, and the hydrostatic bearing design.

  18. Overview of MPC applications in supply chains: Potential use and benefits in the management of forest-based supply chains

    Directory of Open Access Journals (Sweden)

    Tatiana M. Pinho

    2015-12-01

    Full Text Available Aim of study: This work aims to provide an overview of Model Predictive Controllers (MPC applications in supply chains, to describe the forest-based supply chain and to analyse the potential use and benefits of MPC in a case study concerning a biomass supply chain.Area of study: The proposed methods are being applied to a company located in Finland.Material and methods: Supply chains are complex systems where actions and partners’ coordination influence the whole system performance. The increase of competitiveness and need of quick responses to the costumers implies the use of efficient management techniques. The control theory, particularly MPC, has been successfully used as a supply chain management tool. MPC is able to deal with dynamic interactions between the partners and to globally optimize the supply chain performance in the presence of disturbances. However, as far as is authors’ knowledge, there are no applications of this methodology in the forest-based supply chains. This work proposes a control architecture to improve the performance of the forest supply chain. The controller is based on prediction models which are able to simulate the system and deal with disturbances.Main results: The preliminary results enable to evaluate the impacts of disturbances in the supply chain. Thus, it is possible to react beforehand, controlling the schedules and tasks’ allocation, or alert the planning level in order to generate a new plan.Research highlights:   Overview of MPC applications in supply chains; forest-based supply chain description; case study presentation: wood biomass supply chain for energy production; MPC architecture proposal to decrease the operation times.Keywords: biomass; forest; Model Predictive Control; planning; supply chain.

  19. Robust Optimization on Regional WCO-for-Biodiesel Supply Chain under Supply and Demand Uncertainties

    Directory of Open Access Journals (Sweden)

    Yong Zhang

    2016-01-01

    Full Text Available This paper aims to design a robust waste cooking oil- (WCO- for-biodiesel supply chain under WCO supply and price as well as biodiesel demand and price uncertainties, so as to improve biorefineries’ ability to cope with the poor environment. A regional supply chain is firstly introduced based on the biggest WCO-for-biodiesel company in Changzhou, Jiangsu province, and it comprises three components: WCO supplier, biorefinery, and demand zone. And then a robust mixed integer linear model with multiple objectives (economic, environmental, and social objectives is proposed for both biorefinery location and transportation plans. After that, a heuristic algorithm based on genetic algorithm is proposed to solve this model. Finally, the 27 cities in Yangtze River delta are adopted to verify the proposed models and methods, and the sustainability and robustness of biodiesel supply are discussed.

  20. Security of supply in Ireland 2006

    International Nuclear Information System (INIS)

    Bazilian, Morgan; O'Leary, Fergal; O Gallachoir, Brian; Howley, Martin

    2006-12-01

    This is the second annual report on the title theme from SEI. Since SEI's initial security of supply publication there has been considerable attention paid to the security of supply aspects of energy policy worldwide. This reports updates and refines the metrics used to consider security of supply in Ireland. It also presents new analysis in three areas; the development of a supply/demand index, use of mean variance portfolio analysis for the electricity sector and a high oil price energy forecast scenario

  1. Tactical supply chain planning for a forest biomass power plant under supply uncertainty

    International Nuclear Information System (INIS)

    Shabani, Nazanin; Sowlati, Taraneh; Ouhimmou, Mustapha; Rönnqvist, Mikael

    2014-01-01

    Uncertainty in biomass supply is a critical issue that needs to be considered in the production planning of bioenergy plants. Incorporating uncertainty in supply chain planning models provides improved and stable solutions. In this paper, we first reformulate a previously developed non-linear programming model for optimization of a forest biomass power plant supply chain into a linear programming model. The developed model is a multi-period tactical-level production planning problem and considers the supply and storage of forest biomass as well as the production of electricity. It has a one-year planning horizon with monthly time steps. Next, in order to incorporate uncertainty in monthly available biomass into the planning, we develop a two-stage stochastic programming model. Finally, to balance the risk and profit, we propose a bi-objective model. The results show that uncertainty in availability of biomass has an additional cost of $0.4 million for the power plant. Using the proposed stochastic optimization model could reduce this cost by half. - Highlights: • Developed a two-stage stochastic optimization model to consider supply uncertainty. • Maximized the profit of a forest biomass power plant value chain. • Minimized two risk measures, variability index and downside risk, to manage risks. • Stochastic optimization model provided feasible solution for all scenarios. • Results showed a trade-off between profit and risk management

  2. Oil sands supply outlook

    International Nuclear Information System (INIS)

    Dunbar, R.

    2004-01-01

    In March 2004, The Canadian Energy Research Institute released a report on the expected future supply from Alberta's oil sands. The report indicates that the future for the already well-established oil sands industry is promising, particularly given the outlook for oil prices. The challenges facing the industry include higher industry supply costs and the need for innovative commercial and technological solutions to address the risks of irregularities and changes in crude oil prices. In 2003, the industry produced 874 thousand barrels per day of synthetic crude oil and unprocessed crude bitumen. This represents 35 per cent of Canada's total oil production. Current production capacity has increased to 1.0 million barrels per day (mbpd) due to new projects. This number may increase to 3.5 mbpd by 2017. Some new projects may be deferred due to the higher raw bitumen and synthetic crude oil supply costs. This presentation provided supply costs for a range of oil sands recovery technologies and production projections under various business scenarios. tabs., figs

  3. Implementation of Supply Chain Management (SCM in pharmaceutical company, general principles and case study

    Directory of Open Access Journals (Sweden)

    Zoran Nakov

    2014-12-01

    Full Text Available Supply Chain Management (SCM in pharmaceutical industry is defined as a “responsible SCM” and its implementation is according to the principles of: business ethics, rights of labor and principles of healthy and safe working environment. Pharmaceutical companies with implemented “responsible SCM” have to use management systems to facilitate continuous improvement in accordance with their working principles. The main purpose of this management system is to ensure the consistency, reliability and continuous improvement of all workflows within an organization.The analyzed case describes the project of European generic pharmaceutical company, which intends to implement best practice SCM operations for five European manufacturing sites and European logistics organizations (active ingredients supply, distribution centers, affiliate customers and third party manufacturers. The main objectives of the project were the creation of the future improved To-Be situation through implementation of new SCM models to the existing To-Day situation.

  4. Reconstruction of Low Pressure Gas Supply System

    Directory of Open Access Journals (Sweden)

    S. N. Osipov

    2013-01-01

    Full Text Available The current reconstruction of residential areas in large cities especially with the developed heat-supply systems from thermal power stations and reduction of heat consumption for heating due to higher thermal resistance of building enclosing structures requires new technical solutions in respect of gas-supply problems. While making reconstruction of a gas-supply system of the modernized or new buildings in the operating zone of one gas-distribution plant it is necessary to change hot water-supply systems from gas direct-flow water heaters to centralized heat-supply and free gas volumes are to be used for other needs or gas-supply of new buildings with the current external gas distribution network.Selection of additional gas-line sections and points of gas-supply systems pertaining to new and reconstructed buildings for their connection to the current distribution system of gas-supply is to be executed in accordance with the presented methodology.

  5. Upgrading the TFTR Transrex Power Supplies

    International Nuclear Information System (INIS)

    Lawson, J.E.; Marsala, R; Ramakrishnan, S.; Zhao, X.; Sichta, P.

    2009-01-01

    In order to provide improved and expanded experimental capabilities, the existing Transrex power supplies at PPPL are to be upgraded and modernized. Each of the 39 power supplies consists of two six pulse silicon controlled rectifier sections forming a twelve pulse power supply. The first modification is to split each supply into two independent six pulse supplies by replacing the existing obsolete twelve pulse firing generator with two commercially available six pulse firing generators. The second change replaces the existing control link with a faster system, with greater capacity, which will allow for independent control of all 78 power supply sections. The third change replaces the existing Computer Automated Measurement and Control (CAMAC) based fault detector with an Experimental Physics and Industrial Control System (EPICS) compatible unit, eliminating the obsolete CAMAC modules. Finally the remaining relay logic and interfaces to the 'Hardwired Control System' will be replaces with a Programmable Logic Controller (PLC)

  6. 30 CFR 874.14 - Water supply restoration.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Water supply restoration. 874.14 Section 874.14... ABANDONED MINE LAND RECLAMATION GENERAL RECLAMATION REQUIREMENTS § 874.14 Water supply restoration. (a) Any... supply restoration projects. For purposes of this section, “water supply restoration projects” are those...

  7. Information flow in the pharmaceutical supply chain

    OpenAIRE

    Yousefi, Nazila; Alibabaei, Ahmad

    2015-01-01

    Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, man...

  8. Principles in Halal Supply Chain Management

    NARCIS (Netherlands)

    Tieman, H.; Vorst, van der J.G.A.J.; Maznah Che Ghazali,

    2012-01-01

    Purpose – The purpose of this paper is to introduce a new framework to optimise the design of halal food supply chains, called the “Halal Supply Chain Model”. In this research the main logistics business processes are defined, which are the determinants for the halal supply chain performance.

  9. 7 CFR 1000.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1000.6 Section 1000.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Definitions § 1000.6 Supply plant. Supply plant means a plant approved by a duly constituted regulatory agency...

  10. 49 CFR 236.516 - Power supply.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Power supply. 236.516 Section 236.516..., Train Control and Cab Signal Systems Standards § 236.516 Power supply. Automatic cab signal, train stop, or train control device hereafter installed shall operate from a separate or isolated power supply...

  11. 47 CFR 80.1015 - Power supply.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Power supply. 80.1015 Section 80.1015... MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1015 Power supply. (a) There must be readily available for use under normal load conditions, a power supply sufficient...

  12. 20 CFR 654.405 - Water supply.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Water supply. 654.405 Section 654.405... THE EMPLOYMENT SERVICE SYSTEM Housing for Agricultural Workers Housing Standards § 654.405 Water supply. (a) An adequate and convenient supply of water that meets the standards of the State health...

  13. 7 CFR 3015.171 - Unused supplies.

    Science.gov (United States)

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Property § 3015.171 Unused supplies. (a) If unused supplies exceeding $1,000 in total aggregate market value are left over upon termination or... 7 Agriculture 15 2010-01-01 2010-01-01 false Unused supplies. 3015.171 Section 3015.171...

  14. Effect of CRAC units layout on thermal management of data center

    International Nuclear Information System (INIS)

    Nada, S.A.; Said, M.A.

    2017-01-01

    Highlights: • CFD study of thermal management in data centers. • Effects of layout arrangements of the CRACs units relative to the racks array on data center performance. • Design guide liens for data centers energy efficiency improvements. - Abstract: Comprehensive numerical studies of thermal management of data centers were presented by several investigators for different geometric and operating conditions of data centers. In the present work, a technical note regarding the effect of the computer room air conditioning (CRAC) units layout arrangements is presented. Two arrangements of CRAC units layouts are investigated; namely locating CRACs units in line with the racks row and locating the CRACs units perpendicular to the rack row. Temperature distributions, air flow characteristics particularly air recirculation and bypass and thermal management in data centers are evaluated in terms of the measureable overall performance parameters: supply/return heat indices (SHI/RHI) and return temperature indices (RTI). The results showed that locating CRAC units perpendicular to the racks row has the following effects: (i) enhances the uniformity of the air flow from the perforated tiles along the rack row, (ii) reduces the hot air recirculation at the ends racks of the row and the cold air bypass at the middle rack of the row and (iii) enhances the data center performance parameters RTI, SHI and RHI.

  15. What is the cost of supply

    International Nuclear Information System (INIS)

    Commichau, A.

    1994-01-01

    The conference paper discusses the cost of natural gas supply in Europe. The gas consumption has tripled over the last 20 years, and another 50-80% growth is expected for the following two decades despite a more or less stagnant total energy consumption and the introduction of a CO 2 tax to curb the greenhouse effect. Topics are as follow: European natural gas supply; European supply regions; cost of new pipeline gas to Europe; cost of new LNG to Europe; European gas imports - cost of incremental supplies

  16. Environmental management the supply chain perspective

    CERN Document Server

    Wong, Christina W Y; Lun, Y H Venus; Cheng, T C E

    2015-01-01

    In view of the increasing quest for environmental management in businesses, this book provides a good reference to firms to understand how they may manage their supply chains to improve business and environmental performance. The book consists of six chapters covering such topics as environmental management, environmental management practices with supply chain efforts, collaborative environmental management, organizational capabilities in environmental management, environmental disclosure, and closed-loop supply chains. The book presents theory-driven discussions on the link between environmental management and business performance in the context of supply chain management. The book will be useful for firms to learn from the research findings and real-life cases to develop plans to implement environmental management practices jointly with supply chain partners.

  17. Optimal synthesis of energy supply systems for remote open pit mines

    International Nuclear Information System (INIS)

    Carvalho, M.; Romero, A.; Shields, G.; Millar, D.L.

    2014-01-01

    The primary motivation underlying the proposal of polygeneration systems for mine sites is to increase the efficient use of natural resources by combining different technologies and energy resources while satisfying energy service demands. For many mineral producers, particularly in Canada's mining extremes of climate and depth, energy in support of mineral production can be the second largest cost center after labor. A generic methodology is proposed for the design of energy supply systems in mine sites, based on a search for the minimum discounted cost of energy supplied for all feasible different plant configurations. These configurations can be represented within a connectivity matrix which corresponds to a network representation. A Mixed Integer Programming formulation is set out for the multiperiod synthesis and operational planning problem. This is characterized by i) binary variables for the selection of technologies, ii) integer variables for the determination of the number of units installed, and iii) by continuous variables for the representation of energy and economic flows. Through the integration of particular energy supply strategies matching specific mine circumstances (on-grid, remote, degree days, etc) and consideration of technologies that improve energy efficiency, hitherto not considered new technologies and demand management systems or new perspectives on optimal mine site energy supply can be investigated. Some of these investigations identify the economic conditions through which biomass energy feedstocks should be used, for direct heat production, for gasification and providing for Fischer–Tropsch syndiesel manufacture. As well as integrating demand from mobile diesel-fueled plant into an optimization procedure this analysis shows how the techniques can be used to explore economic conditions of threshold prices for biomass (purpose-grown biomass and peat are considered herein) and trucked-in diesel. The methodology also allows for

  18. 46 CFR 197.456 - Breathing supply hoses.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Breathing supply hoses. 197.456 Section 197.456 Shipping....456 Breathing supply hoses. (a) The diving supervisor shall insure that— (1) Each breathing supply....5 times its maximum working pressure; (2) Each breathing supply hose assembly, prior to being placed...

  19. 46 CFR 197.340 - Breathing gas supply.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Breathing gas supply. 197.340 Section 197.340 Shipping... GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.340 Breathing gas supply. (a) A primary breathing gas supply for surface-supplied diving must be sufficient to support the following for the...

  20. Strategic Supply

    National Research Council Canada - National Science Library

    Alexander, Kelly; Cole, Heather; Cural, Ahmet; Daugherty, Darryl; Howard, Russell; Keane, Thomas; Louie, K. Y; McNeely, Rosa; Mordente, Patrick; Petrillo, Robert

    2006-01-01

    .... The Council of Supply Chain Management Professionals (CSCMP) has defined SCM as,"...encompassing the planning and management of all activities involved in sourcing and procurement, conversion, and all Logistics Management activities...

  1. Using Civilian Supply Chain Management Best Practices to Improve Army Supply Chain Management Procedures

    Science.gov (United States)

    2017-06-09

    System-Army IT Information Technology LMP Logistics Modernization Program PLL Prescribed Load List SCM Supply Chain Management SSA Supply Support...Civilian and Military SCM Future Trends Army future transformations are based around the Logistics Modernization Program (LMP). What began as a plan...

  2. The Supply Chain Risk Management

    OpenAIRE

    Skitsko Volodymyr I.; Voynikov Mykola Yu.

    2018-01-01

    The article considers current approaches of risk-management in supply chains, the main steps of the risk management process are analyzed and detailed both for a separate enterprise – participant of supply chain, for the supply chain in general, and for the Beer game, based on the international risk management standards. The article provides a way to assess the risks of the «producer» in the Beer game according to the three strategies of its behavior, which presumably can correspond to differe...

  3. TEXT poloidal coil systems power supplies

    International Nuclear Information System (INIS)

    Hutchins, S.H.; Brower, D.F.

    1977-01-01

    TEXT is a convertional iron core tokamak which will have a toroidal field of 3.0 Tesla produced by room temperature copper coils and a maximum plasma current pulse of 400 kA induced by a 40 turn Ohmic Heating coil. The major radius is 100 cm and the minor radius of the plasma is 28 cm. The machine is intended for basic research in tokamak plasma physics and atomic physics and is designed primarily to provide a stable hot plasma, extremely good diagnostic access, and reliable operation. The discharge pulse length will be 300 msec and the repetition period 120 seconds. Power for the toroidal field coils and for the ohmic heating supply is provided by a 100 MVA energy storage alternator. The vertical field, horizontal field, fast positioning, and discharge cleaning power supply systems are powered from the Tokamak Laboratory power mains. The ohmic heating power system consists of an SCR controlled premagnetizing supply and commutation circuit, the main ohmic heating capacitor bank to provide plasma breakdown and current rise, and an SCR controlled power supply which sustains plasma current during the 300 ms pulse. The vertical field power system uses a small capacitor bank and an SCR controlled supply. The horizontal field has a reversible SCR controlled supply, and the fast positioning coils are powered by bipolar output transistor controlled supplies. This paper describes the loads, required wave forms, and the specifications for these power supply systems

  4. Employment within the power supply industry and the power supply related activities; Sysselsatte i kraftnaeringen og kraftrelatert virksomhet 2011

    Energy Technology Data Exchange (ETDEWEB)

    Thoen, Haavard

    2012-07-01

    The report's main objective is to investigate employment within the power supply industry and the power supply related activities. The report will describe the composition of employees in regard to sex, age and education. The power supply industry is defined in Statistics Norway's Standard Industrial Classification, as 'Production and distribution of electricity'. The group of companies related to power supply related activities employ similar persons in regard to education and occupation, typical to companies in the power supply industry. These two groups make up the power supply sector in this report. In 2011 there were 18 450 employees in the power supply sector. This constitutes an increase of nearly 13.5 per cent since 2004 and 1.1 per cent since 2010. The sex distribution of about 80 per cent men and 20 per cent women has been fairly stable since 2004. The power supply sector has a low share of women among its employees compared to the private sector in general. In 2011 the level of education in the power supply sector was higher than for the private sector in general. Since 2004, the share of persons with higher education has increased from 27 to 33 per cent. Employees in the power supply sector are on average older than employees in the private sector. The employees have matured since 2004, but in the last few years, there have also been signs of fresh recruitment. The power supply industry had a net influx of 380 new employees, in the period between 2009 and 2011. There were 1678 new employees and 1298 employees lost in the sector due to attrition. If we look at the supply of new employees who were also employed in 2010, 14.2 percent of female employees worked in temporary staff recruitment agencies. Temporary work seems to be an important entry gate to the power supply industry for women. Among men, the building- and construction sector was the most common background for new employees in the power supply industry. Among people who quit

  5. The 3He Supply Problem

    Energy Technology Data Exchange (ETDEWEB)

    Kouzes, Richard T.

    2009-05-01

    One of the main uses for 3He is in gas proportional counters for neutron detection. Radiation portal monitors deployed for homeland security and non-proliferation use such detectors. Other uses of 3He are for research detectors, commercial instruments, well logging detectors, dilution refrigerators, for targets or cooling in nuclear research, and for basic research in condensed matter physics. The US supply of 3He comes almost entirely from the decay of tritium used in nuclear weapons by the US and Russia. A few other countries contribute a small amount to the world’s 3He supply. Due to the large increase in use of 3He for homeland security, the supply has dwindled, and can no longer meet the demand. This white paper reviews the problems of supply, utilization, and alternatives.

  6. LCA of Drinking Water Supply

    DEFF Research Database (Denmark)

    Godskesen, Berit; Meron, Noa; Rygaard, Martin

    2018-01-01

    Water supplies around the globe are growing complex and include more intense treatment methods than just decades ago. Now, desalination of seawater and wastewater reuse for both non-potable and potable water supply have become common practice in many places. LCA has been used to assess...... the potentials and reveal hotspots among the possible technologies and scenarios for water supplies of the future. LCA studies have been used to support decisions in the planning of urban water systems and some important findings include documentation of reduced environmental impact from desalination of brackish...... water over sea water, the significant impacts from changed drinking water quality and reduced environmental burden from wastewater reuse instead of desalination. Some of the main challenges in conducting LCAs of water supply systems are their complexity and diversity, requiring very large data...

  7. Simplified design of switching power supplies

    CERN Document Server

    Lenk, John

    1995-01-01

    * Describes the operation of each circuit in detail * Examines a wide selection of external components that modify the IC package characteristics * Provides hands-on, essential information for designing a switching power supply Simplified Design of Switching Power Supplies is an all-inclusive, one-stop guide to switching power-supply design. Step-by-step instructions and diagrams render this book essential for the student and the experimenter, as well as the design professional. Simplified Design of Switching Power Supplies concentrates on the use of IC regulators. All popular forms of swit

  8. Antiretroviral procurement and supply chain management.

    Science.gov (United States)

    Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

    2014-01-01

    Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

  9. 9 CFR 354.224 - Water supply.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Water supply. 354.224 Section 354.224....224 Water supply. The water supply shall be ample, clean, and potable with adequate facilities for its distribution in the plant and its protection against contamination and pollution. (a) Hot water at a...

  10. 18 CFR 801.6 - Water supply.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Water supply. 801.6... POLICIES § 801.6 Water supply. (a) The Susquehanna River Basin is rich in water resources. With proper... forth in the comprehensive plan. (c) The Commission shall study the basin's water supply needs, the...

  11. 24 CFR 3285.603 - Water supply.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  12. Modelling Lean and Green Supply Chain

    Science.gov (United States)

    Duarte, Susana Carla Vieira Lino Medina

    The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the

  13. Achieving Supply Chain Integration within Construction Industry

    Directory of Open Access Journals (Sweden)

    Peter McDermotti

    2012-11-01

    Full Text Available The main driver behind the adoption of supply chain management (SCM philosophy into the construction industry was the successes within other industry sectors. SCM can be defined as network of different organisations, linked upstream and downstream in a chain, aiming to produce quality and value in the services and products for the end consumers through integrated processes and activities. In order to achieve the optimised level of integration of the whole supply chain, the industry has responded in various forms. This paper will discuss different initiatives by the researchers,construction industry,and the UK government in order to achieve optimal level of supply chain integration. This paper will discuss the concept of aggregation,and also look at other supply chain integration related concepts including client-led supply chain, knowledge about the whole supply chain, effects of procurement on integration of supply chain, etc. The paper will give a brief overview and initial findings of a project undertaken by the authors, and also include examples from the UK construction industry on bundling of the supply and demand.

  14. Wood supply and demand

    Science.gov (United States)

    Peter J. Ince; David B. McKeever

    2011-01-01

    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  15. Uranium supply and demand

    Energy Technology Data Exchange (ETDEWEB)

    Spriggs, M J

    1976-01-01

    Papers were presented on the pattern of uranium production in South Africa; Australian uranium--will it ever become available; North American uranium resources, policies, prospects, and pricing; economic and political environment of the uranium mining industry; alternative sources of uranium supply; whither North American demand for uranium; and uranium demand and security of supply--a consumer's point of view. (LK)

  16. NDE training activities at the EPRI NDE center

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The need for an industry-wide qualification for NDE personnel is becoming more evident in both in-service inspection and technical skills training. ASME Section XI requirements for the qualification and certification of visual, ultrasonic, and eddy current examines is one of the major areas being supported by training at the Center. The other major thrust is in response to the Boiling Water Reactor Owners Group and its recognition of the importance of the UT operator's accurately detecting, discriminating, and sizing intergranular stress corrosion cracks (IGSCC) in piping, and inspecting weld overlay repairs of these cracked pipes. In addition, the pressurized water reactor (PWR) utilities have recognized the importance of improved eddy current data analysis of steam generator tubing. The overall intent of the Center's training is to meet the most critical utility needs with quality training that can be used by the trainee's employer as a part of its certification of that individual. To do this, the Center has organized and activated a carefully maintained documentation and records system built around the Continuing Education Unit (CEU). To address the problem of the small supply of entry-level NDE personnel available to the utilities, the Center has developed, through its Human Resource Development, academic and utility co-op programs to generate guidelines and NDE teaching materials for high schools, technical schools, and universities

  17. Strategic Supply

    National Research Council Canada - National Science Library

    Alexander, Kelly; Cole, Heather; Cural, Ahmet; Daugherty, Darryl; Howard, Russell; Keane, Thomas; Louie, K. Y; McNeely, Rosa; Mordente, Patrick; Petrillo, Robert

    2006-01-01

    ...; but rather, as an enabler across all industries. Therefore, this industry study looked at Strategic Supply as an integrated process performed by industries to obtain comparative and competitive advantage in the global marketplace...

  18. Modular High Voltage Power Supply

    Energy Technology Data Exchange (ETDEWEB)

    Newell, Matthew R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-18

    The goal of this project is to develop a modular high voltage power supply that will meet the needs of safeguards applications and provide a modular plug and play supply for use with standard electronic racks.

  19. Upgrade of the Nuclotron power supply

    International Nuclear Information System (INIS)

    Karpinskij, V.N.; Kondrat'ev, N.G.; Osipenkov, A.L.

    2010-01-01

    One of topics of the Nuclotron development is the modification of its power supply scheme and upgrade of the energy evacuation system aimed to provide long and safe operation of the Nuclotron at the dipole magnetic field up to 2 T. It is necessary for the Nuclotron operation as a part of injection chain of the heavy ion collider under design at JINR as well as for fulfillment of its current scientific program. In the report the structure and peculiarity of the existing power supply system are described. The existing system is based on separated supply of dipole magnets and quadrupole lenses. General goals of the power supply modification are described, structural and principal schemes of the power supply, control system and the schemes of the energy evacuation key are presented

  20. Research Methodologies in Supply Chain Management

    DEFF Research Database (Denmark)

    Kotzab, Herbert

    . Within the 36 chapters 70 authors bring together a rich selection of theoretical and practical examples of how research methodologies are applied in supply chain management. The book contains papers on theoretical implications as well as papers on a range of key methods, such as modelling, surveys, case...... studies or action research. It will be of great interest to researchers in the area of supply chain management and logistics, but also to neighbouring fields, such as network management or global operations.......While supply chain management has risen to great prominence in recent year, there are hardly related developments in research methodologies. Yet, as supply chains cover more than one company, one central issue is how to collect and analyse data along the whole or relevant part of the supply chain...