Ecology, Economy and security of supply of the Dutch Electricity Supply System. A scenario based future analysis

International Nuclear Information System (INIS)

Roedel, J.G.

2008-01-01

The Dutch electricity sector has been transformed into a liberalized international energy market. Market players are free to choose from various electricity generation options when replacing or expanding production capacity. However, choices that are made now will influence emissions (ecology), integral costs (economy) and availability (security of supply) for the next 25 - 40 years. This thesis shows if and how, based on the current electricity supply system, an optimal balance of ecology, economy and security of supply can be achieved. First, the current electricity supply system is described to create a frame of reference. Then, future technological developments are described for electricity production options. Four potential scenarios are constructed featuring various uncertainties: the globalising versus the local economy; priority versus subordination for the environment; and the security/insecurity of the fuel supply. These four scenarios are worked out with a specially developed techno-economic simulation model; the results are analysed in terms of ecology, economy and security of supply. The findings indicate that it is impossible to arrive at an optimal balance for the defined scenarios. Scenarios with a low environmental impact lead to high integral costs and vice versa. However, by applying a smart combination of various modern generation technologies, CO2 capture and storage, the deployment of biomass and the re-use of residual heat it is possible to reach an optimal balance whereby the additional integral costs can be kept under control compared with the lowest-cost scenarios. To achieve this, clear growth and incentive guidelines need to be established for the various production options. This thesis will form a good starting point for that exercise

Succinic acid production derived from carbohydrates: An energy and greenhouse gas assessment of a platform chemical toward a bio-based economy

NARCIS (Netherlands)

Cok, B.|info:eu-repo/dai/nl/371750679; Tsiropoulos, I.; Roes, A.L.|info:eu-repo/dai/nl/303022388; Patel, M.K.|info:eu-repo/dai/nl/18988097X

2014-01-01

Bio-based succinic acid has the potential to become a platform chemical, i.e. a key building block for deriving both commodity and high-value chemicals, which makes it an attractive compound in a bio-based economy. A few companies and industrial consortia have begun to develop its industrial

How big is the bio-business? Notes on measuring the size of the Dutch bio-economy

NARCIS (Netherlands)

Heijman, Wim

2016-01-01

This paper focuses on the size of the Dutch bio-economy. With the help of consolidated input-output tables, the size of the bio-economy in terms of value added is estimated for the years 2008-2012. It appears that in the Netherlands, during the period indicated, its share in national production

Secondary Resources in the Bio-Based Economy : A Computer Assisted Survey of Value Pathways in Academic Literature

NARCIS (Netherlands)

Davis, Chris B.; Aid, Graham; Zhu, B.

2017-01-01

Research on value pathways for organic wastes has been steadily increasing in recent decades. There have been few considerably broad overview studies of such materials and their valuation potential in the bio-based economy in part because of the vast multitude of materials and processes that can

The seven challenges for transitioning into a bio-based circular economy in the agri-food sector

NARCIS (Netherlands)

Borrello, Massimiliano; Lombardi, Alessia; Pascucci, Stefano; Cembalo, Luigi

2016-01-01

Background: Closed-loop agri-food supply chains have a high potential to reduce environmental and economic costs resulting from food waste disposal. This paper illustrates an alternative to the traditional supply chain of bread based on the principles of a circular economy. Methods: Six circular

Security of feedstocks supply for future bio-ethanol production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2010-01-01

This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. - Research highlights: →Bioethanol in Thailand derived from molasses, cassava, sugarcane juice could yield reductions of 64%, 49% and 87% in GHGs when compared to conventional gasoline. →High yields improvement are required for a reliable and sufficient supply of molasses, cassava and sugarcane to satisfy the long-term demands for bio-ethanol and other related industries. →Other factors to enhance long-term security of feedstocks supply for sustainable bioethanol production in Thailand include increasing use of sugarcane juice as feedstock and promoting production of bioethanol derived from agricultural residues.

The Potential of the Bio-economy: From Photosynthesis to Industry, from Innovation to Market

International Nuclear Information System (INIS)

Roy, Claude

2016-01-01

Growing awareness of resource exhaustion and of the consequences, particularly for the climate, of our modes of consumption and production has helped remind humanity that we live in a finite world and that to make too many demands on our ecosystem is to run the risk of reaching a point of no return. To change everyone's styles of production and consumption in ail countries by the end of the century is without doubt too ambitious an aim, but it is worth putting it forward and trying to equip ourselves with the tools to achieve it. The bio-economy or 'green carbon' economy is one of those tools, as Claude Roy shows in this article. It consists in exploiting the fruits of plant photosynthesis not merely for foodstuffs, but also for materials, chemical bases, fertilizers, energy etc. Claude Roy outlines the main characteristics of the bio-economy, particularly in France, the economic sectors it covers and their potential, particularly in terms of employment. First and foremost, he shows how it could contribute to meeting the major challenges of our world, whose finite nature we are rediscovering today. Energy conservation, a renewables- based economy and carbon sequestration -three possible 'emergency exits' at the heart of the bio-economy, so long as human beings can commit to developing their agricultural crops and forests. (author)

Process modeling and supply chain design for advanced biofuel production based on bio-oil gasification

Science.gov (United States)

Li, Qi

As a potential substitute for petroleum-based fuel, second generation biofuels are playing an increasingly important role due to their economic, environmental, and social benefits. With the rapid development of biofuel industry, there has been an increasing literature on the techno-economic analysis and supply chain design for biofuel production based on a variety of production pathways. A recently proposed production pathway of advanced biofuel is to convert biomass to bio-oil at widely distributed small-scale fast pyrolysis plants, then gasify the bio-oil to syngas and upgrade the syngas to transportation fuels in centralized biorefinery. This thesis aims to investigate two types of assessments on this bio-oil gasification pathway: techno-economic analysis based on process modeling and literature data; supply chain design with a focus on optimal decisions for number of facilities to build, facility capacities and logistic decisions considering uncertainties. A detailed process modeling with corn stover as feedstock and liquid fuels as the final products is presented. Techno-economic analysis of the bio-oil gasification pathway is also discussed to assess the economic feasibility. Some preliminary results show a capital investment of 438 million dollar and minimum fuel selling price (MSP) of $5.6 per gallon of gasoline equivalent. The sensitivity analysis finds that MSP is most sensitive to internal rate of return (IRR), biomass feedstock cost, and fixed capital cost. A two-stage stochastic programming is formulated to solve the supply chain design problem considering uncertainties in biomass availability, technology advancement, and biofuel price. The first-stage makes the capital investment decisions including the locations and capacities of the decentralized fast pyrolysis plants and the centralized biorefinery while the second-stage determines the biomass and biofuel flows. The numerical results and case study illustrate that considering uncertainties can be

Between mountains of gold and green business. System analysis of a bio-based economy; Tussen gouden bergen en groene business. Systeemverkenning van een bio-based economie

Energy Technology Data Exchange (ETDEWEB)

Weterings, R.; Roelofs, E.; Suurs, R.; Van der Zee, F.

2012-04-15

The study shows it is possible for the Dutch industry to expand its strong knowledge position to a forceful international competitive position by aiming innovations towards the realization of a biobased economy. The main conclusions of this report are that the biobased economy offers big opportunities for sustainable economic development in the Netherlands and in Europe, but there is no guarantee of success. At a European level a stable and inviting investment climate necessary for biobased economic activity is lacking. In the Netherlands there is a need for a proactive innovation policy to substantially accelerate the development of promising business cases [Dutch] Deze verkenning vertrekt vanuit trends en ontwikkelingen in de wereld en kijkt vervolgens naar de consequenties voor Europa en Nederland. Dit 'van buiten naar binnen' perspectief contrasteert met veel andere analyses die doorgaans vertrekken vanuit de kansen voor bio-based processen en producten en vooral ingaan op de 'gewenste' maatschappelijke context. Gekeken is enerzijds naar globale maatschappelijke trends en anderzijds naar specifieke sleutelactiviteiten binnen het Nederlandse innovatiesysteem. De verkenning gaat met deze benadering niet alleen in op de mondiale en Europese context, maar analyseert ook op systematische wijze de sterkten en zwakten binnen het Nederlandse innovatiesysteem.

Supply chain design under uncertainty for advanced biofuel production based on bio-oil gasification

International Nuclear Information System (INIS)

Li, Qi; Hu, Guiping

2014-01-01

An advanced biofuels supply chain is proposed to reduce biomass transportation costs and take advantage of the economics of scale for a gasification facility. In this supply chain, biomass is converted to bio-oil at widely distributed small-scale fast pyrolysis plants, and after bio-oil gasification, the syngas is upgraded to transportation fuels at a centralized biorefinery. A two-stage stochastic programming is formulated to maximize biofuel producers' annual profit considering uncertainties in the supply chain for this pathway. The first stage makes the capital investment decisions including the locations and capacities of the decentralized fast pyrolysis plants as well as the centralized biorefinery, while the second stage determines the biomass and biofuels flows. A case study based on Iowa in the U.S. illustrates that it is economically feasible to meet desired demand using corn stover as the biomass feedstock. The results show that the locations of fast pyrolysis plants are sensitive to uncertainties while the capacity levels are insensitive. The stochastic model outperforms the deterministic model in the stochastic environment, especially when there is insufficient biomass. Also, farmers' participation can have a significant impact on the profitability and robustness of this supply chain. - Highlights: • Decentralized supply chain design for advanced biofuel production is considered. • A two-stage stochastic programming is formulated to consider uncertainties. • Farmers' participation has a significant impact on the biofuel supply chain design

The soil in the bio-economy (Main report); De bodem in de bio-economie (Hoofdrapport)

Energy Technology Data Exchange (ETDEWEB)

Croezen, H.J.; Odegard, I.Y.R.; Bergsma, G.C. [CE Delft, Delft (Netherlands); Langeveld, J.W.A. [Biomass Research, Wageningen (Netherlands)

2013-03-15

The impact on soils of further development of the biobased economy has been investigated. Policymakers in the Netherlands and the EU are keen to see this grow to a share of 25-30% in the overall economy by 2030-2040. Under these plans biomass will be used in the energy sector (electricity, heat, gas), transport sector (biodiesel, bioethanol) and chemical industry. For 21 biomass supply chains this study examines the effects on the organic matter content of soils, the nutrient requirements (NPK), water consumption, land use, ecotoxicity and climate balance, including soil effects. The main result to emerge from the analysis is that there are major differences between the various biomass chains. Some have positive effects on soil organic matter balance, require low nutrient inputs and score well on climate balance, while others need up to ten times more inputs for the same contribution to the biobased economy. Chains in which nutrients are returned to the soil perform relatively better, for example ethanol production with return of the lignin fraction. Ethanol from sugarcane also scores fairly high, but only on condition that leaves and heads are not burned, but left on the field. The supply chains in question have also been translated into a number of complete scenarios for European conversion to a 25% biobased economy. This confirmed that varying the precise design of the scenarios has a major impact on soil parameters. Based on this analysis, we recommend that greater attention be paid to the soil effects of biobased supply chains in policies relating to the biobased economy, for example by including more detailed descriptions of soil-related aspects in sustainability criteria and subsidies. The results of the study are presented in a Main Report and in separate Appendices detailing agricultural aspects [Dutch] In opdracht van de Technische Commissie Bodem (TCB) heeft CE Delft samen met Biomass Research onderzocht wat de bodemkundige effecten zijn van het verder

Rethinking Value in the Bio-economy

Science.gov (United States)

2016-01-01

Current debates in science and technology studies emphasize that the bio-economy—or, the articulation of capitalism and biotechnology—is built on notions of commodity production, commodification, and materiality, emphasizing that it is possible to derive value from body parts, molecular and cellular tissues, biological processes, and so on. What is missing from these perspectives, however, is consideration of the political-economic actors, knowledges, and practices involved in the creation and management of value. As part of a rethinking of value in the bio-economy, this article analyzes three key political-economic processes: financialization, capitalization, and assetization. In doing so, it argues that value is managed as part of a series of valuation practices, it is not inherent in biological materialities. PMID:28458406

Safety Aspects of Bio-Based Nanomaterials.

Science.gov (United States)

Catalán, Julia; Norppa, Hannu

2017-12-01

Moving towards a bio-based and circular economy implies a major focus on the responsible and sustainable utilization of bio-resources. The emergence of nanotechnology has opened multiple possibilities, not only in the existing industrial sectors, but also for completely novel applications of nanoscale bio-materials, the commercial exploitation of which has only begun during the last few years. Bio-based materials are often assumed not to be toxic. However, this pre-assumption is not necessarily true. Here, we provide a short overview on health and environmental aspects associated with bio-based nanomaterials, and on the relevant regulatory requirements. We also discuss testing strategies that may be used for screening purposes at pre-commercial stages. Although the tests presently used to reveal hazards are still evolving, regarding modifi-cations required for nanomaterials, their application is needed before the upscaling or commercialization of bio-based nanomaterials, to ensure the market potential of the nanomaterials is not delayed by uncertainties about safety issues.

Safety Aspects of Bio-Based Nanomaterials

Directory of Open Access Journals (Sweden)

Julia Catalán

2017-12-01

Full Text Available Moving towards a bio-based and circular economy implies a major focus on the responsible and sustainable utilization of bio-resources. The emergence of nanotechnology has opened multiple possibilities, not only in the existing industrial sectors, but also for completely novel applications of nanoscale bio-materials, the commercial exploitation of which has only begun during the last few years. Bio-based materials are often assumed not to be toxic. However, this pre-assumption is not necessarily true. Here, we provide a short overview on health and environmental aspects associated with bio-based nanomaterials, and on the relevant regulatory requirements. We also discuss testing strategies that may be used for screening purposes at pre-commercial stages. Although the tests presently used to reveal hazards are still evolving, regarding modifi­cations required for nanomaterials, their application is needed before the upscaling or commercialization of bio-based nanomaterials, to ensure the market potential of the nanomaterials is not delayed by uncertainties about safety issues.

Bio economy and entrepreneurial ecosystem patterns Case study for Romania - USH ProBusiness

Directory of Open Access Journals (Sweden)

Costin Lianu

2017-03-01

Full Text Available This paper is investigating various patterns of entrepreneurial relations and engagements  that may help the shift to bio economy  and the ways they can facilitate entrepreneurial understanding and access to markets and business opportunities in this field. It also investigate the role of universities and cluster in transfer of knowledge towards bio economy and possibilities of interaction making a case study on USH ProBusiness in Romania. Main conclusion of the paper is that participation of  entrepreneurs, especially SME but also large companies in active  Entrepreneurial Ecosystems (EE   plays an essential role in transposing bio economy  from strategy to action but some regions may be well advanced  and other lagging behind. High trust and large EE in terms of networking are better fit to accelerate the knowledge and innovation process and universities may play a major role in this direction, as important catalyst.

Biomass - Energy - Climate - From photosynthesis to bio-economy. V. 1: 'the energy from the fields'; V. 2: 'the energy from the woods'

International Nuclear Information System (INIS)

Brulhet, Jacques; Figuet, Raymond; Bardon, Eric; Bour-Poitrinal, Emmanuelle; Dereix, Charles; Leblanc-Cuvillier, Anick

2011-10-01

A fist volume presents, outlines and comments the possibilities of energy generation from the biomass produced in fields, the development potential of biomass production and of food industry, the challenge of bio-wastes and soil structure, the relationship between renewable energies and new crops, the development of agriculture to supply bio-refineries, produce biofuels and develop vegetal chemistry. Examples of biomass valorisation in la Reunion are presented. The second volume addresses the possibilities related to wood exploitation. It outlines ways to mobilise this resource, discusses the issue of forest exploitation in Guyana, gives an overview of wood applications, describes how to valorise forest carbon storage, gives an overview of innovation, governance and information for this specific sector, and evokes the place of bio-economy on markets

The influence of biomass supply chains and by-products on the greenhouse gas emissions from gasification-based bio-SNG production systems

International Nuclear Information System (INIS)

Holmgren, Kristina M.; Berntsson, Thore S.; Andersson, Eva; Rydberg, Tomas

2015-01-01

This study analyses the impact on the GHG (greenhouse gas) emissions of the raw material supply chain, the utilisation of excess heat and CO 2 storage for a bio-SNG (biomass gasification-based synthetic natural gas) system by applying a consequential life cycle assessment approach. The impact of the biomass supply chain is analysed by assessing GHG emissions of locally produced woodchips and pellets with regional or transatlantic origin. Results show that the supply area for the gasification plant can be substantially increased with only modest increases in overall GHG emissions (3–5%) by using regionally produced pellets. The transatlantic pellet chains contribute to significantly higher GHG emissions. Utilising excess heat for power generation or steam delivery for industrial use contributes to lower emissions from the system, whereas delivery of district heating can contribute to either increased or decreased emissions. The production technology of the replaced heat and the carbon intensity of the reference power production were decisive for the benefits of the heat deliveries. Finally, the storage of CO 2 separated from the syngas upgrading and from the flue gases of the gasifier can nearly double the GHG emission reduction potential of the bio-SNG system. - Highlights: • Greenhouse gas emission evaluation of gasification-based bio-SNG system is made. • The impact of biomass supply chains and utilisation of excess heat is in focus. • Locally produced woodchips result in lowest overall greenhouse gas emissions. • Regionally produced pellets have small impact on overall greenhouse gas emissions. • Storing separated CO 2 from the bio-SNG process reduces the GHG impact significantly.

Life cycle impact assessment of bio-based plastics from sugarcane ethanol

NARCIS (Netherlands)

Tsiropoulos, I.; Faaij, A. P C; Lundquist, L.; Schenker, U.; Briois, J. F.; Patel, M. K.

2015-01-01

The increasing production of bio-based plastics calls for thorough environmental assessments. Using life cycle assessment, this study compares European supply of fully bio-based high-density polyethylene and partially bio-based polyethylene terephthalate from Brazilian and Indian sugarcane ethanol

Six recommendations for a bio-based economy in the Netherlands

International Nuclear Information System (INIS)

Van der Hoeven, D.

2009-03-01

The Bio-based Raw Materials Platform (PGG), part of the Energy Transition in The Netherlands, commissioned the Agricultural Economics Research Institute (LEI) and the Copernicus Institute of Utrecht University to conduct research on the macro-economic impact of large scale deployment of biomass for energy and materials in the Netherlands. Two model approaches were applied based on a consistent set of scenario assumptions: a bottom-up study including technoeconomic projections of fossil and bio-based conversion technologies and a topdown study including macro-economic modelling of (global) trade of biomass and fossil resources. The results of the top-down and bottom-up modelling work are reported separately. Based on the results of the studies the platform formulated six recommendations [nl

Bio-based economy in the Netherlands. Macro-economic outline of a large-scale introduction of green resources in the Dutch energy supply

International Nuclear Information System (INIS)

Van der Hoeven, D.

2009-03-01

The Bio-based Raw Materials Platform (PGG), part of the Energy Transition in The Netherlands, commissioned the Agricultural Economics Research Institute (LEI) and the Copernicus Institute of Utrecht University to conduct research on the macro-economic impact of large scale deployment of biomass for energy and materials in the Netherlands. Two model approaches were applied based on a consistent set of scenario assumptions: a bottom-up study including technoeconomic projections of fossil and bio-based conversion technologies and a topdown study including macro-economic modelling of (global) trade of biomass and fossil resources. The results of the top-down and bottom-up modelling work are reported separately. This is the public version of studies [nl

Vulnerability of the economy to the potential disturbances of energy supply: A logic-based model with application to the case of China

International Nuclear Information System (INIS)

Gnansounou, Edgard; Dong Jun

2010-01-01

The disturbances of energy supply that may result from both external and domestic events create a significant threat for national economy due to potential impacts on the productivity, employment and overall economic growth. Building scenarios of the economy's vulnerability to these disturbances is delicate because of the significant number of interrelated factors that should be taken into consideration. In this paper, a logic-based model (LBM) is developed, which allows for defining, exploring and assessing the determinants and the indicators of the economy's vulnerability related to the energy supply disturbances within a coherent scenarios assessment framework. The proposed model is illustrated with the case of China. After developing the general framework, three particular scenarios are investigated. Based on the case study, the performance and limitations of the model are analyzed, and its ability to evaluate national energy policies is discussed. Finally, some recommendations for further improvements are made.

Vulnerability of the economy to the potential disturbances of energy supply. A logic-based model with application to the case of China

Energy Technology Data Exchange (ETDEWEB)

Gnansounou, Edgard [Ecole Polytechnique Federale de Lausanne (EPFL), Station 18, CH-1015, Lausanne (Switzerland); Dong, Jun [North China Electric Power University, 102206 Beijing (China)

2010-06-15

The disturbances of energy supply that may result from both external and domestic events create a significant threat for national economy due to potential impacts on the productivity, employment and overall economic growth. Building scenarios of the economy's vulnerability to these disturbances is delicate because of the significant number of interrelated factors that should be taken into consideration. In this paper, a logic-based model (LBM) is developed, which allows for defining, exploring and assessing the determinants and the indicators of the economy's vulnerability related to the energy supply disturbances within a coherent scenarios assessment framework. The proposed model is illustrated with the case of China. After developing the general framework, three particular scenarios are investigated. Based on the case study, the performance and limitations of the model are analyzed, and its ability to evaluate national energy policies is discussed. Finally, some recommendations for further improvements are made. (author)

Vulnerability of the economy to the potential disturbances of energy supply: A logic-based model with application to the case of China

Energy Technology Data Exchange (ETDEWEB)

Gnansounou, Edgard, E-mail: edgard.gnansounou@epfl.c [Ecole Polytechnique Federale de Lausanne (EPFL), Station 18, CH-1015, Lausanne (Switzerland); Dong Jun [North China Electric Power University, 102206 Beijing (China)

2010-06-15

The disturbances of energy supply that may result from both external and domestic events create a significant threat for national economy due to potential impacts on the productivity, employment and overall economic growth. Building scenarios of the economy's vulnerability to these disturbances is delicate because of the significant number of interrelated factors that should be taken into consideration. In this paper, a logic-based model (LBM) is developed, which allows for defining, exploring and assessing the determinants and the indicators of the economy's vulnerability related to the energy supply disturbances within a coherent scenarios assessment framework. The proposed model is illustrated with the case of China. After developing the general framework, three particular scenarios are investigated. Based on the case study, the performance and limitations of the model are analyzed, and its ability to evaluate national energy policies is discussed. Finally, some recommendations for further improvements are made.

Rethinking Value in the Bio-economy: Finance, Assetization, and the Management of Value.

Science.gov (United States)

Birch, Kean

2017-05-01

Current debates in science and technology studies emphasize that the bio-economy-or, the articulation of capitalism and biotechnology-is built on notions of commodity production, commodification, and materiality, emphasizing that it is possible to derive value from body parts, molecular and cellular tissues, biological processes, and so on. What is missing from these perspectives, however, is consideration of the political-economic actors, knowledges, and practices involved in the creation and management of value. As part of a rethinking of value in the bio-economy, this article analyzes three key political-economic processes: financialization, capitalization, and assetization. In doing so, it argues that value is managed as part of a series of valuation practices, it is not inherent in biological materialities.

Knowledge-Based Economy in Argentina, Costa Rica and Mexico: A Comparative Analysis from the Bio-Economy Perspective

Directory of Open Access Journals (Sweden)

Ana Barbara MUNGARAY-MOCTEZUMA

2015-06-01

Full Text Available The objective of this article is to determine the necessary institutional characteristics of technology and human capital in Argentina, Costa Rica and Mexico in order to evolve towards a knowledge-based economy, addressing the importance of institutions for their development. In particular, the knowledge-based economy is analyzed from the perspective of bioeconomics. Based on the Knowledge Economy Index (KEI which considers 148 indicators, in the following categories: a economic performance and institutional regime; b education and human resources, c innovation, and d information and communication technologies, we selected 13 indicators. We aim to identify the strengths and opportunities for these countries in order to meet the challenges that arise from the paradoxes of technological progress and globalization. In this sense, bioeconomy is approached as part of the economy. This analysis shows, among other things, that Argentina has greater potential to compete in an economy sustained in the creation and dissemination of knowledge, while Costa Rica has an institutional and regulatory environment that is more conducive to the development of business activities, and Mexico faces significant challenges regarding its institutional structure, economic performance and human resources.

Bio-based Industries Joint Undertaking: The catalyst for sustainable bio-based economic growth in Europe.

Science.gov (United States)

Mengal, Philippe; Wubbolts, Marcel; Zika, Eleni; Ruiz, Ana; Brigitta, Dieter; Pieniadz, Agata; Black, Sarah

2018-01-25

This article discusses the preparation, structure and objectives of the Bio-based Industries Joint Undertaking (BBI JU). BBI JU is a public-private partnership (PPP) between the European Commission (EC) and the Bio-based Industries Consortium (BIC), the industry-led private not-for-profit organisation representing the private sectors across the bio-based industries. The model of the public-private partnership has been successful as a new approach to supporting research and innovation and de-risking investment in Europe. The BBI JU became a reality in 2014 and represents the largest industrial and economic cooperation endeavour financially ever undertaken in Europe in the area of industrial biotechnologies. It is considered to be one of the most forward-looking initiatives under Horizon 2020 and demonstrates the circular economy in action. The BBI JU will be the catalyst for this strategy to mobilise actors across Europe including large industry, small and medium-sized enterprises (SMEs), all types of research organisations, networks and universities. It will support regions and in doing so, the European Union Member States and associated countries in the implementation of their bioeconomy strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

Nitrogen and phosphorus release from organic wastes and suitability as bio-based fertilizers in a circular economy

DEFF Research Database (Denmark)

Case, Sean; Jensen, Lars Stoumann

2018-01-01

The drive to a more circular economy has created increasing interest in recycling organic wastes as bio-based fertilizers. This study screened 15 different manures, digestates, sludges, composts, industry by-products, and struvites. Nitrogen (N) and phosphorous (P) release was compared following...... of the material (r = −0.6). Composted, dried, or raw organic waste materials released less N (mean of 10.8 ± 0.5%, 45.3 ± 7.2%, and 47.4 ± 3.2% of total N added respectively) than digestates, industry-derived organic fertilizer products, and struvites (mean of 58.2 ± 2.8%, 77.7 ± 6.0%, and 100.0 ± 13.1% of total...

Oil crops in biofuel applications: South Africa gearing up for a bio-based economy

OpenAIRE

Marvey, B B

2009-01-01

Large fluctuations in crude oil prices and the diminishing oil supply have left economies vulnerable to energy shortages thus placing an enormous pressure on nations around the world to seriously consider alternative renewable resources as feedstock in biofuel applications. Apart from energy security reasons, biofuels offer other advantages over their petroleum counterparts in that they contribute to the reduction in green- house gas emissions and to sustainable development. Just a few decade...

Green Supply Chain Network Design with Economies of Scale and Environmental Concerns

Directory of Open Access Journals (Sweden)

Dezhi Zhang

2017-01-01

Full Text Available This study considers a design problem in the supply chain network of an assembly manufacturing enterprise with economies of scale and environmental concerns. The study aims to obtain a rational tradeoff between environmental influence and total cost. A mixed-integer nonlinear programming model is developed to determine the optimal location and size of regional distribution centers (RDCs and the investment of environmental facilities considering the effects of economies of scale and CO2 emission taxes. Numerical examples are provided to illustrate the applications of the proposed model. Moreover, comparative analysis of the related key parameters is conducted (i.e., carbon emission tax, logistics demand of customers, and economies of scale of RDC, to explore the corresponding effects on the network design of a green supply chain. Moreover, the proposed model is applied in an actual case—network design of a supply chain of an electric meter company in China. Findings show that (i the optimal location of RDCs is affected by the demand of customers and the level of economies of scale and that (ii the introduction of CO2 emission taxes will change the structure of a supply chain network, which will decrease CO2 emissions per unit shipment.

Energy, economy, and environment analysis and optimization on manufacturing plant energy supply system

International Nuclear Information System (INIS)

Feng, Lujia; Mears, Laine; Beaufort, Cleveland; Schulte, Joerg

2016-01-01

Highlights: • Single objective and multicriteria optimization approaches are proposed. • Objectives of energy, economy, and environment are proved conflicting. • 3-input-5-output energy supply system of an automotive plant is studied. - Abstract: Increasing attention has recently been drawn to energy consumption in manufacturing plants. Facing the challenges from reducing emissions coupled with rising raw material prices and energy costs, manufacturers are trying to balance the energy usage strategy among the total energy consumption, economy, and environment, which can be self-conflicting at times. In this paper, energy systems in manufacturing environments are reviewed, and the current status of onsite energy system and renewable energy usage are discussed. Single objective and multicriteria optimization approaches are effectively formulated for making the best use of energy delivered to the production processes. Energy supply operation suggestions based on the optimization results are obtained. Finally, an example from an automotive assembly manufacturer is described to demonstrate the energy usage in the current manufacturing plants and how the optimization approaches can be applied to satisfy the energy management objectives. According to the optimization results, in an energy oriented operation, it takes 35% more in monetary cost; while in an economy oriented operation, it takes 17% more in megawatt hour energy supply and tends to rely more on the inexpensive renewable energy.

System-of-Systems Framework for the Future Hydrogen-Based Transportation Economy: Preprint

Energy Technology Data Exchange (ETDEWEB)

Duffy, M.; Sandor, D.

2008-06-01

From a supply chain view, this paper traces the flow of transportation fuels through required systems and addresses the current petroleum-based economy, DOE's vision for a future hydrogen-based transportation economy, and the challenges of a massive market and infrastructure transformation.

Towards a sustainable bio-based economy: Redirecting primary metabolism to new products with plant synthetic biology.

Science.gov (United States)

Shih, Patrick M

2018-08-01

Humans have domesticated many plant species as indispensable sources of food, materials, and medicines. The dawning era of synthetic biology represents a means to further refine, redesign, and engineer crops to meet various societal and industrial needs. Current and future endeavors will utilize plants as the foundation of a bio-based economy through the photosynthetic production of carbohydrate feedstocks for the microbial fermentation of biofuels and bioproducts, with the end goal of decreasing our dependence on petrochemicals. As our technological capabilities improve, metabolic engineering efforts may expand the utility of plants beyond sugar feedstocks through the direct production of target compounds, including pharmaceuticals, renewable fuels, and commodity chemicals. However, relatively little work has been done to fully realize the potential in redirecting central carbon metabolism in plants for the engineering of novel bioproducts. Although our ability to rationally engineer and manipulate plant metabolism is in its infancy, I highlight some of the opportunities and challenges in applying synthetic biology towards engineering plant primary metabolism. Copyright © 2018 Elsevier B.V. All rights reserved.

Perspectives on Resource Recovery from Bio-Based Production Processes: From Concept to Implementation

DEFF Research Database (Denmark)

S.B.A. Udugama, Isuru; Mansouri, Seyed Soheil; Mitic, Aleksandar

2017-01-01

Recovering valuable compounds from waste streams of bio-based production processes is in line with the circular economy paradigm, and is achievable by implementing “simple-to-use” and well-established process separation technologies. Such solutions are acceptable from industrial, economic...... and environmental points of view, implying relatively easy future implementation on pilot- and full-scale levels in the bio-based industry. Reviewing such technologies is therefore the focus here. Considerations about technology readiness level (TRL) and Net Present Value (NPV) are included in the review, since TRL...... and NPV contribute significantly to the techno-economic evaluation of future and promising process solutions. Based on the present review, a qualitative guideline for resource recovery from bio-based production processes is proposed. Finally, future approaches and perspectives toward identification...

Sustainability Benefits and Challenges of Inter-Organizational Collaboration in Bio-Based Business: A Systematic Literature Review

Directory of Open Access Journals (Sweden)

Gohar Nuhoff-Isakhanyan

2016-03-01

Full Text Available Bio-based businesses are often considered to be sustainable. However, they are also linked to sustainability challenges such as deforestation and soil erosion. Encouraged to exploit innovative solutions and enhance sustainability, organizations engaged in bio-based activities extensively explore collaboration possibilities with external partners. The objective of this paper is to integrate the available knowledge on sustainability of inter-organisational collaborations in bio-based businesses, while considering the three aspects of sustainability: environmental, economic, and social. We collected data from three academic sources—Web of Science, Scopus, and EconLit—and conducted a systematic literature review. The results show the importance of geographical proximity and complementarity in creating sustainability benefits such as reduced emissions, reduced waste, economic synergies, and socio-economic activities. Based on the findings, we have developed a framework that illustrates sustainability benefits and challenges. Interestingly, the studies emphasize sustainability benefits more in emerging than in industrialised economies, especially relating to the social aspects of sustainability. In conclusion, although the scholars have not discussed mitigation of several sustainability challenges in bio-based businesses, such as land use conflicts, they have found evidence of vital sustainability benefits, such as energy availability, lower emissions, improved socio-economic life, and poverty reduction, which are essential in emerging economies.

Polypyrrole Additional functions to bio-based façades

NARCIS (Netherlands)

Sailer, M.F. (Michael); Oostra, M.A.R. (Mieke); Eversdijk, J. (Jacco)

2015-01-01

AbstractDue to the crisis of 2008 the construction and real estate market became more demand-driven. Architects, builders and developers are looking for high-quality solutions for the realization of sustainable buildings. Supplying SMEs experience an increasing demand for bio-based materials with

Overview of the Systems Analysis Framework for the EU Bioeconomy. Deliverable 1.4 of the EU FP 7 SAT-BBE project Systems Analysis Tools Framework for the EU Bio-Based Economy Strategy (SAT BBE)

NARCIS (Netherlands)

Leeuwen, van M.G.A.; Meijl, van H.; Smeets, E.M.W.; Tabeau-Kowalska, E.W.

2014-01-01

In November 2012 the Systems Analysis Tools Framework for the EU Bio-Based Economy Strategy project (SAT-BBE) was launched with the purpose to design an analysis tool useful to monitoring the evolution and impacts of the bioeconomy. In the SAT-BBE project the development of the analysis tool for the

Techno-economy optimization of PV-diesel hybrid / stand-alone systems for remote area power supply based on empirical analysis for Indonesia

Energy Technology Data Exchange (ETDEWEB)

Budiono, Chayun [Komplek BPP Teknologi, Jl. Teknologi VII, Jakarta (Indonesia)

2007-07-01

The techno-economy assessment of photovoltaic (PV) system applications for remote area power supply (RAPS) in combination with operation of diesel generating set (DGS) in Indonesia based on an empirical model is formulated. This model has shown that it helps the project owner to easily optimise the sub-system size (i.e. PV array, auxiliary generator and battery sizes) based on the financial constraints needed for the investment and operation of the system. Two major markets of RAPS in Indonesia are currently for rural electrification and telecommunication systems (orig.)

BioBoost. Biomass based energy intermediates boosting bio-fuel production

Energy Technology Data Exchange (ETDEWEB)

Niebel, Andreas [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Institut fuer Katalyseforschung und -technologie (IKFT)

2013-10-01

To increase the share of biomass for renewable energy in Europe conversion pathways which are economic, flexible in feedstock and energy efficient are needed. The BioBoost project concentrates on dry and wet residual biomass and wastes as feedstock for de-central conversion by fast pyrolysis, catalytic pyrolysis and hydrothermal carbonization to the intermediate energy carriers oil, coal or slurry. Based on straw the energy density increases from 2 to 20-30 GJ/m{sup 3}, enabling central GW scale gasification plants for bio-fuel production. A logistic model for feedstock supply and connection of de-central with central conversion is set up and validated allowing the determination of costs, the number and location of de-central and central sites. Techno/economic and environmental assessment of the value chain supports the optimization of products and processes. The utilization of energy carriers is investigated in existing and coming applications of heat and power production and synthetic fuels and chemicals. (orig.)

Impact of Bio-Based Plastics on Current Recycling of Plastics

Directory of Open Access Journals (Sweden)

Luc Alaerts

2018-05-01

Full Text Available Bio-based plastics are increasingly appearing in a range of consumption products, and after use they often end up in technical recycling chains. Bio-based plastics are different from fossil-based ones and could disturb the current recycling of plastics and hence inhibit the closure of plastic cycles, which is undesirable given the current focus on a transition towards a circular economy. In this paper, this risk has been assessed via three elaborated case studies using data and information retrieved through an extended literature search. No overall risks were revealed for bio-based plastics as a group; rather, every bio-based plastic is to be considered as a potential separate source of contamination in current recycling practices. For PLA (polylactic acid, a severe incompatibility with PET (polyethylene terephthalate recycling is known; hence, future risks are assessed by measuring amounts of PLA ending up in PET waste streams. For PHA (polyhydroxy alkanoate there is no risk currently, but it will be crucial to monitor future application development. For PEF (polyethylene furanoate, a particular approach for contamination-related issues has been included in the upcoming market introduction. With respect to developing policy, it is important that any introduction of novel plastics is well guided from a system perspective and with a particular eye on incompatibilities with current and upcoming practices in the recycling of plastics.

Biogas between renewable energy and bio-economy policies—opportunities and constraints resulting from a dual role

NARCIS (Netherlands)

Pfau, S.F.; Hagens, J.E.; Dankbaar, B.

2017-01-01

BACKGROUND - Biogas plays a major role in two policy domains: the renewable energy domain and the bio-economy domain. The purpose of this paper is to examine the relationship of current biogas practices with the two policy domains and to identify how biogas can contribute to both. METHODS - The

Recirculation: A New Concept to Drive Innovation in Sustainable Product Design for Bio-Based Products.

Science.gov (United States)

Sherwood, James; Clark, James H; Farmer, Thomas J; Herrero-Davila, Lorenzo; Moity, Laurianne

2016-12-29

Bio-based products are made from renewable materials, offering a promising basis for the production of sustainable chemicals, materials, and more complex articles. However, biomass is not a limitless resource or one without environmental and social impacts. Therefore, while it is important to use biomass and grow a bio-based economy, displacing the unsustainable petroleum basis of energy and chemical production, any resource must be used effectively to reduce waste. Standards have been developed to support the bio-based product market in order to achieve this aim. However, the design of bio-based products has not received the same level of attention. Reported here are the first steps towards the development of a framework of understanding which connects product design to resource efficiency. Research and development scientists and engineers are encouraged to think beyond simple functionality and associate value to the potential of materials in their primary use and beyond.

Impact Of The Oil Trade On The Global Economy And The Role Of Giant Fields In Predicting Supply

Energy Technology Data Exchange (ETDEWEB)

Kelley, Wayne; Bishop, Richard

2010-09-15

Confusion about global oil supply ('peak oil') is a distraction from the economic issue of massive wealth transfer associated with oil trading and its potential to destabilize the world economy. Without an accurate forecast of oil volumes (resources, reserves and supply), timing and cost, there is no reliable way to model the consequences of the oil trade on the global economy. This paper illustrates why it is imperative to improve our understanding of the oil trade on the global economy and proposes a method of forecasting oil supply for input into a credible global economic model.

THE CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT

International Nuclear Information System (INIS)

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-01-01

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed during the fourth quarter. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. During this first quarter of 2001, shredding of the feed material and final feed conditioning were completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing. During this quarter, TVA completed the washing and dewatering of the lignin material produced from the MSW hydrolysis. Seven drums of lignin material were washed to recover the acid and sugar from the lignin and provide an improved fuel for steam generation. Samples of both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation. After sample evaluation, EERC approved sending the material and all of the necessary fuel for testing was shipped to EERC. EERC has requested and will receive coal typical of the fuel to the TVA-Colbert boilers. This material will be used at EERC as baseline material and for mixing with the bio-fuel for combustion testing. EERC combustion testing of the bio based fuels is scheduled to begin in August of 2001. The TVA-Colbert facility has neared completion of the task to evaluate the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed

Computational Methods to Assess the Production Potential of Bio-Based Chemicals.

Science.gov (United States)

Campodonico, Miguel A; Sukumara, Sumesh; Feist, Adam M; Herrgård, Markus J

2018-01-01

Elevated costs and long implementation times of bio-based processes for producing chemicals represent a bottleneck for moving to a bio-based economy. A prospective analysis able to elucidate economically and technically feasible product targets at early research phases is mandatory. Computational tools can be implemented to explore the biological and technical spectrum of feasibility, while constraining the operational space for desired chemicals. In this chapter, two different computational tools for assessing potential for bio-based production of chemicals from different perspectives are described in detail. The first tool is GEM-Path: an algorithm to compute all structurally possible pathways from one target molecule to the host metabolome. The second tool is a framework for Modeling Sustainable Industrial Chemicals production (MuSIC), which integrates modeling approaches for cellular metabolism, bioreactor design, upstream/downstream processes, and economic impact assessment. Integrating GEM-Path and MuSIC will play a vital role in supporting early phases of research efforts and guide the policy makers with decisions, as we progress toward planning a sustainable chemical industry.

Evaluating Economic Alternatives for Wood Energy Supply Based on Stochastic Simulation

Directory of Open Access Journals (Sweden)

Ulises Flores Hernández

2018-04-01

Full Text Available Productive forests, as a major source of biomass, represent an important pre-requisite for the development of a bio-economy. In this respect, assessments of biomass availability, efficiency of forest management, forest operations, and economic feasibility are essential. This is certainly the case for Mexico, a country with an increasing energy demand and a considerable potential for sustainable forest utilization. Hence, this paper focuses on analyzing economic alternatives for the Mexican bioenergy supply based on the costs and revenues of utilizing woody biomass residues. With a regional spatial approach, harvesting and transportation costs of utilizing selected biomass residues were stochastically calculated using Monte Carlo simulations. A sensitivity analysis of percentage variation of the most probable estimate in relation to the parameters price and cost for one alternative using net future analysis was conducted. Based on the results for the northern region, a 10% reduction of the transportation cost would reduce overall supply cost, resulting in a total revenue of 13.69 USD/m3 and 0.75 USD/m3 for harvesting residues and non-extracted stand residues, respectively. For the central south region, it is estimated that a contribution of 16.53 USD/m3 from 2013 and a total revenue of 33.00 USD/m3 in 2030 from sawmill residues will improve the value chain. The given approach and outputs provide the basis for the decision-making process regarding forest utilization towards energy generation based on economic indicators.

Bio-composites : opportunities for value-added biobased materials

Energy Technology Data Exchange (ETDEWEB)

Drzal, L.T. [Michigan State Univ., East Lansing, MI (United States). Dept. of Chemical Engineering and Materials Science]|[Michigan State Univ., East Lansing, MI (United States). Composite Materials and Structures Center

2003-07-01

In order to reduce dependency on foreign oil, there is a growing need to develop and commercialize new bio-based green materials and technologies that can produce bio-based structural materials that are competitive with current synthetic products. The use of bio-based products would also improve the environment and create new opportunities for the agricultural economy. This paper described ongoing research into bio-based materials and products that replace petroleum-based products. In particular, it examined the use of biocomposites made by embedding natural/biofibers such as kenaf, hemp, flax, jute, henequen, pineapple leaf fiber, corn stalk fibers and native Michigan grasses into petroleum-derived traditional plastics such as polypropylene, unsaturated polyesters and epoxies. It also examines the use of green biocomposites developed by embedding these bio-fibers into renewable resource-based bioplastics such as cellulosic plastics and soy-based plastics. New processing methods that combine biofibers with plastics were needed to produce the biocomposites with desirable mechanical properties. The study showed that biofiber reinforced petroleum-based plastic biocomposites can produce a structural material that offers a balance between ecology, economy and technology. The potential for using these materials for automotive and building materials was also presented. 1 tab., 28 figs.

Building green supply chains in eco-industrial parks towards a green economy: Barriers and strategies.

Science.gov (United States)

Li, Jacqueline; Pan, Shu-Yuan; Kim, Hyunook; Linn, Jean H; Chiang, Pen-Chi

2015-10-01

As suggested by UNEP, the key to sustainable development is to create a "green economy" which should encapsulate all three sectors: the industry, the people, and the government. Therefore, there is an urgent need to develop and implement the green technologies into the existing facilities, especially in the developing countries. In this study, the role of green supply chains in eco-industrial parks (EIPs) towards a green economy was investigated. The strategies and effective evaluation procedures of the green economy were proposed by assessing the barriers from the perspective of institution, regulation, technology, and finance. In addition, three case studies from iron and steel-making, paper mill and pulping, and petrochemical industries were presented and illustrated for building the green supply chains. For example, in the case of Lin-Hai Industrial Park, a total of 15 efficient green supply chains using waste-to-resources technologies were established by 2012, resulting in an economic benefit of USD 100 million per year. It suggests that the green supply chains should be established to achieve both economic growth and environmental protection. With these successful experiences, building a green supply chain within industrial park should be extensively promoted to make traditional industries around the world being environmentally bearable, economic viable, and social equitable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Energy supply between state, local government, and economy. Energieversorgung zwischen Staat, Gemeinde und Wirtschaft

Energy Technology Data Exchange (ETDEWEB)

Loewer, W.

1989-01-01

The central theme in the current discussion about the decentralization of the structures of energy supply in the Federal Republic of Germany and about the possibilities for implementing the reform on the basis of the valid law is a competency of the local government for energy provision by virtue of its 'general responsibility' or its 'tasks as a caterer for basic needs' (Daseinsvorsorge). The question raised thereby in relation to constitutional law, municipal economy law and energy law are thoroughly studied and answered in the book. It deals with the complexes 'catering for basic needs', 'public task', and 'decentralization' in the energy-political discussion, giving selected examples; with basic traits of the development of electric power supply as a many-sided system of energy provision; with the competency of the national or local government for ensuring electric power supply based on its being a 'caterer for basic needs', or electric power supply, being a public task; and with electric power supply as a municipal task. (orig.).

Special on the Bio-based Economy. Making money with a green economy; Special Biobased Economy. Geld verdienen met een groene economie

Energy Technology Data Exchange (ETDEWEB)

Waterval, R. (ed.)

2011-12-15

Bio-based is booming. Increasingly more businesses see a healthy business case in products that are not made with fossil raw materials, but with biomass. But where are the opportunities for the Netherlands? And which roles can the government, trade and industry and science play? This PM special contains interviews with and experiences of pioneering entrepreneurs and agricultural attaches in the Netherlands and abroad [Dutch] Biobased is booming. Steeds meer bedrijven zien een gezonde businesscase in producten die niet gemaakt zijn met fossiele grondstoffen maar met biomassa. Waar liggen de kansen voor Nederland? En welke rol is daarbij weggelegd voor de overheid, het bedrijfsleven en de wetenschap? In deze PM-special onder meer interviews met en ervaringen van pionerende entrepreneurs en landbouwattaches in binnen- en buitenland.

Oil crops in biofuel applications: South Africa gearing up for a bio-based economy

Directory of Open Access Journals (Sweden)

BB Marvey

2009-04-01

Full Text Available Large fluctuations in crude oil prices and the diminishing oil supply have left economies vulnerable to energy shortages thus placing an enormous pressure on nations around the world to seriously consider alternative renewable resources as feedstock in biofuel applications. Apart from energy security reasons, biofuels offer other advantages over their petroleum counterparts in that they contribute to the reduction in green- house gas emissions and to sustainable development. Just a few decades after discontinuing its large scale production of bioethanol for use as en- gine fuel, South Africa (SA is again on its way to resuscitating its biofuel industry. Herein an overview is presented on South Africa’s oilseed and biofuel production, biofuels industrial strategy, industry readiness, chal- lenges in switching to biofuels and the strategies to overcome potential obstacles.

The Placenta Economy

DEFF Research Database (Denmark)

Kroløkke, Charlotte; Dickinson, Elizabeth; Foss, Karen A.

2018-01-01

This article examines the human placenta not only as a scientific, medical and biological entity but as a consumer bio-product. In the emergent placenta economy, the human placenta is exchanged and gains potentiality as food, medicine and cosmetics. Drawing on empirical research from the United......, in the emergent bio-economy, the dichotomy between the inner and the outer body is deconstructed, while the placenta gains clinical and industrial as well as affective value....

Migrant labor supply in a booming non-renewable resource economy: Cure and transmission mechanism for de-industrialization?

Science.gov (United States)

Nulle, Grant Mark

This paper challenges the determinism that booming resource economies suffer from de-industrialization, the "Dutch Disease". For several decades, economists have attempted to explain how a sudden surge in mineral and energy extraction affects an economy's output and employment from an aggregate and sectoral perspective. Economic theory shows that a "boom" in mineral and energy production is welfare enhancing to the economy experiencing it. However, the phenomenon also induces inter-sectoral adjustments among non-renewable resource (NRR), traditional traded, and non-traded industries that tend to crowd out traditional export sectors such as agriculture and manufacturing. In turn, this paper asks two fundamental questions: 1) Can the inter-sectoral adjustments wrought by a boom in NRR production be mitigated in the resource-abundant economy experiencing it; 2) Can the inter-sectoral adjustments be exported to a neighboring non-resource economy by movements in migrant labor supply? The theoretical model and empirical estimation approach presented in this paper introduces an endogenous migrant labor supply response to booms in NRR output to test the extent traditional tradable sectors shrink in the NRR-abundant economy during the boom and if such effects are exported to a neighboring jurisdiction. Using data at the U.S. county level, the empirical results show that booming economies experience positive and statistically significant rates of real income and traded sector job growth during the boom, attributable to the influx of migrant labor. By contrast, little evidence is found that non-booming counties adjacent to the booming counties experience declines in income or job growth because of labor supply outflows. Instead, the results suggest the larger the number of potential "donor" counties that can supply labor to the booming economies, the more likely the transmission of booming economy effects, namely evidence of de-industrialization, is diffused across all of the

The Role of Bioeconomy Sectors and Natural Resources in EU Economies: A Social Accounting Matrix-Based Analysis Approach

Directory of Open Access Journals (Sweden)

Patricia D. Fuentes-Saguar

2017-12-01

Full Text Available The bio-based economy will be crucial in achieving a sustainable development, covering all ranges of natural resources. In this sense, it is very relevant to analyze the economic links between the bioeconomic sectors and the rest of the economy, determining their total and decomposed impact on economic growth. One of the major problems in carrying out this analysis is the lack of information and complete databases that allow analysis of the bioeconomy and its effects on other economic activities. To overcome this issue, disaggregated social accounting matrices have been obtained for the highly bio-based sectors of the 28 European Union member states. Using this complex database, a linear multiplier analysis shows the future key role of bio-based sectors in boosting economic development in the EU. Results show that the bioeconomy has not yet unleashed its full potential in terms of output and job creation. Thus, output and employment multipliers show that many sectors related to the bioeconomy are still underperforming compared to the EU average, particularly those with higher value added; although, they are still crucial sectors for the wealth creation.

Case Study Analysing Potentials to Improve Material Efficiency in Manufacturing Supply Chains, Considering Circular Economy Aspects

Directory of Open Access Journals (Sweden)

Anja T. Braun

2018-03-01

Full Text Available In order to decouple economic growth from global material consumption it is necessary to implement material efficiency strategies at the level of single enterprises and their supply chains, and to implement circular economy aspects. Manufacturing firms face multiple implementation challenges like cost limitations, competition, innovation and stakeholder pressure, and supplier and customer relationships, among others. Taking as an example a case of a medium-sized manufacturing company, opportunities to realise material efficiency improvements within the company borders—on the supply chain and by using circular economy measures—are assessed. Deterministic calculations and simulations, performed for the supply chain of this company, show that measures to increase material efficiency in the supply chain are important. However, they need to be complemented by efforts to return waste and used products to the economic cycle, which requires rethinking the traditional linear economic system.

THE DILEMMA OF DEMAND SIDE POLICIES VERSUS SUPPLY SIDE POLICIES FOR RELAUNCHING CAPITALIST ECONOMIES

Directory of Open Access Journals (Sweden)

PETRE PRISECARU

2014-11-01

Full Text Available The first important economic recession in this century started in USA with the burst of real estate bubble followed by the bankruptcy of some investment and commercial banks and the collapse of capital market. The financial-banking crisis spilt over the world economy and caused the second deepest economic recession in the last 80 years. The financial crisis has badly affected almost all market economies and was the result of a combination between market failures and mistakes made in macroeconomic policies. In the financial sector there was not enough regulation and supervision of corporate governance while in goods industry the pressure of over-regulation led to higher factor costs and supply contraction. The direct result of supply side policies and particularly of monetarist instruments is seen now clearly in the USA: large deficits, huge debts, reduced savings, heavy dependence on foreign money (capital and resources, relatively low domestic output and supply.

Techno-economic performance analysis of bio-oil based Fischer-Tropsch and CHP synthesis platform

International Nuclear Information System (INIS)

Ng, Kok Siew; Sadhukhan, Jhuma

2011-01-01

The techno-economic potential of the UK poplar wood and imported oil palm empty fruit bunch derived bio-oil integrated gasification and Fischer-Tropsch (BOIG-FT) systems for the generation of transportation fuels and combined heat and power (CHP) was investigated. The bio-oil was represented in terms of main chemical constituents, i.e. acetic acid, acetol and guaiacol. The compositional model of bio-oil was validated based on its performance through a gasification process. Given the availability of large scale gasification and FT technologies and logistic constraints in transporting biomass in large quantities, distributed bio-oil generations using biomass pyrolysis and centralised bio-oil processing in BOIG-FT system are technically more feasible. Heat integration heuristics and composite curve analysis were employed for once-through and full conversion configurations, and for a range of economies of scale, 1 MW, 675 MW and 1350 MW LHV of bio-oil. The economic competitiveness increases with increasing scale. A cost of production of FT liquids of 78.7 Euro/MWh was obtained based on 80.12 Euro/MWh of electricity, 75 Euro/t of bio-oil and 116.3 million Euro/y of annualised capital cost. -- Highlights: → Biomass to liquid process and gas to liquid process synthesis. → Biorefinery economic analysis. → Pyrolysis oil to biofuel. → Gasification and Fischer-Tropsch. → Process integration, pinch analysis and energy efficiency.

About economy of fuel and energy resources in the hot water supply system

Science.gov (United States)

Rotov, P. V.; Sivukhin, A. A.; Zhukov, D. A.; Zhukova, A. V.

2017-11-01

The assessment of the power efficiency realized in the current of heat supply system of technology of regulation of loading of the hot water supply system, considering unevenness consumption of hot water is executed. For the purpose of definition the applicability boundary of realized technology comparative analysis of indicators of the effectiveness of its work within the possible range of the parameters of regulations. Developed a software application “The calculation of the total economy of fuel and energy resources in the hot water supply system when you change of the parameters of regulations”, which allows on the basis of multivariate calculations analyses of their results, to choose the optimum mode of operation heat supply system and to assess the effectiveness of load regulation in the hot water supply system.

Building a bio-based industry in the Middle East through harnessing the potential of the Red Sea biodiversity

DEFF Research Database (Denmark)

Nielsen, Jens; Archer, John; Essack, Magbubah

2017-01-01

, represents a remarkable source of biodiversity that can be geared towards economical and sustainable bioproduction processes in the local area and can be competitive in the international bio-based economy. Recent bioprospecting studies, conducted by the King Abdullah University of Science and Technology...

Monitoring the bio-economy : Assessing local and global biomass flows, land-use change, carbon impacts and future land resources

NARCIS (Netherlands)

Goh, C.S.

2017-01-01

As one of the common goals of developing the ‘bio-economy (BE)’ is to reduce GHG emissions from fossil feedstocks, it is crucial to monitor the associated carbon stock change from land-use change (CSC-LUC). This thesis addressed the key knowledge gaps related to (i) tracking the biomass flows for

Towards the core of the biobased economy. The sustainability promises of biomass in perspective

International Nuclear Information System (INIS)

Asveld, L.; Van Est, R.; Stemerding, D.

2011-02-01

This report addresses the best ways for the Dutch government to supervise the transition to the bio-economy. To this end, the researchers no only the technological state of affairs, but also the current Dutch policy with regard to the bio-economy. Which societal discussions are held in the wide framework of the bio-economy? A review of history shows which scientific, social and economic efforts the Netherlands is facing in realizing a transition to a bio-economy. [nl

Cascade use indicators for selected biopolymers: Are we aiming for the right solutions in the design for recycling of bio-based polymers?

Science.gov (United States)

Hildebrandt, Jakob; Bezama, Alberto; Thrän, Daniela

2017-04-01

When surveying the trends and criteria for the design for recycling (DfR) of bio-based polymers, priorities appear to lie in energy recovery at the end of the product life of durable products, such as bio-based thermosets. Non-durable products made of thermoplastic polymers exhibit good properties for material recycling. The latter commonly enjoy growing material recycling quotas in countries that enforce a landfill ban. Quantitative and qualitative indicators are needed for characterizing progress in the development towards more recycling friendly bio-based polymers. This would enable the deficits in recycling bio-based plastics to be tracked and improved. The aim of this paper is to analyse the trends in the DfR of bio-based polymers and the constraints posed by the recycling infrastructure on plastic polymers from a systems perspective. This analysis produces recommendations on how life cycle assessment indicators can be introduced into the dialogue between designers and recyclers in order to promote DfR principles to enhance the cascading use of bio-based polymers within the bioeconomy, and to meet circular economy goals.

Cascade use indicators for selected biopolymers: Are we aiming for the right solutions in the design for recycling of bio-based polymers?

Science.gov (United States)

Hildebrandt, Jakob; Bezama, Alberto; Thrän, Daniela

2017-01-01

When surveying the trends and criteria for the design for recycling (DfR) of bio-based polymers, priorities appear to lie in energy recovery at the end of the product life of durable products, such as bio-based thermosets. Non-durable products made of thermoplastic polymers exhibit good properties for material recycling. The latter commonly enjoy growing material recycling quotas in countries that enforce a landfill ban. Quantitative and qualitative indicators are needed for characterizing progress in the development towards more recycling friendly bio-based polymers. This would enable the deficits in recycling bio-based plastics to be tracked and improved. The aim of this paper is to analyse the trends in the DfR of bio-based polymers and the constraints posed by the recycling infrastructure on plastic polymers from a systems perspective. This analysis produces recommendations on how life cycle assessment indicators can be introduced into the dialogue between designers and recyclers in order to promote DfR principles to enhance the cascading use of bio-based polymers within the bioeconomy, and to meet circular economy goals. PMID:28097922

Nitrogen and phosphorus release from organic wastes and suitability as bio-based fertilizers in a circular economy.

Science.gov (United States)

Case, S D C; Jensen, L S

2017-11-22

The drive to a more circular economy has created increasing interest in recycling organic wastes as bio-based fertilizers. This study screened 15 different manures, digestates, sludges, composts, industry by-products, and struvites. Nitrogen (N) and phosphorous (P) release was compared following addition to soil. Three waste materials were then 'upgraded' using heating and pressure (105°C at 220 kPa), alkalinization (pH 10), or sonification to modify N and P release properties, and compared in a second soil incubation. Generally, maximum N release was negatively correlated with the CN ratio of the material (r = -0.6). Composted, dried, or raw organic waste materials released less N (mean of 10.8 ± 0.5%, 45.3 ± 7.2%, and 47.4 ± 3.2% of total N added respectively) than digestates, industry-derived organic fertilizer products, and struvites (mean of 58.2 ± 2.8%, 77.7 ± 6.0%, and 100.0 ± 13.1% of total N added respectively). No analyzed chemical property or processing type could explain differences in P release. No single upgrading treatment consistently increased N or P release. However, for one raw biosolid, heating at a low temperature (105°C) with pressure did increase N release as a percentage of total N added to soil from 30% to 43%.

To be, or not to be biodegradable… that is the question for the bio-based plastics.

Science.gov (United States)

Prieto, Auxiliadora

2016-09-01

Global warming, market and production capacity are being the key drivers for selecting the main players for the next decades in the market of bio-based plastics. The drop-in bio-based polymers such as the bio-based polyethylene terephtalate (PET) or polyethylene (PE), chemically identical to their petrochemical counterparts but having a component of biological origin, are in the top of the list. They are followed by new polymers such as PHA and PLA with a significant market growth rate since 2014 with projections to 2020. Research will provide improved strains designed through synthetic and systems biology approaches; furthermore, the use of low-cost substrates will contribute to the widespread application of these bio- based polymers. The durability of plastics is not considered anymore as a virtue, and interesting bioprospecting strategies to isolate microorganisms for assimilating the recalcitrant plastics will pave the way for in vivo strategies for plastic mineralization. In this context, waste management of bio-based plastic will be one of the most important issues in the near future in terms of the circular economy. There is a clear need for standardized labelling and sorting instructions, which should be regulated in a coordinated way by policymakers and material producers. © 2016 The Author. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Bio-patch design and implementation based on a low-power system-on-chip and paper-based inkjet printing technology.

Science.gov (United States)

Yang, Geng; Xie, Li; Mantysalo, Matti; Chen, Jian; Tenhunen, Hannu; Zheng, L R

2012-11-01

This paper presents the prototype implementation of a Bio-Patch using fully integrated low-power System-on-Chip (SoC) sensor and paper-based inkjet printing technology. The SoC sensor is featured with programmable gain and bandwidth to accommodate a variety of bio-signals. It is fabricated in a 0.18-ìm standard CMOS technology, with a total power consumption of 20 ìW from a 1.2 V supply. Both the electrodes and interconnections are implemented by printing conductive nano-particle inks on a flexible photo paper substrate using inkjet printing technology. A Bio-Patch prototype is developed by integrating the SoC sensor, a soft battery, printed electrodes and interconnections on a photo paper substrate. The Bio-Patch can work alone or operate along with other patches to establish a wired network for synchronous multiple-channel bio-signals recording. The measurement results show that electrocardiogram and electromyogram are successfully measured in in-vivo tests using the implemented Bio-Patch prototype.

Optimization of Consignment-Store-Based Supply Chain with Black Hole Algorithm

Directory of Open Access Journals (Sweden)

Ágota Bányai

2017-01-01

Full Text Available The globalization of economy and market led to increased networking in the field of manufacturing and services. These manufacturing and service processes including supply chain became more and more complex. The supply chain includes in many cases consignment stores. The design and operation of these complex supply chain processes can be described as NP-hard optimization problems. These problems can be solved using sophisticated models and methods based on metaheuristic algorithms. This research proposes an integrated supply model based on consignment stores. After a careful literature review, this paper introduces a mathematical model to formulate the problem of consignment-store-based supply chain optimization. The integrated model includes facility location and assignment problems to be solved. Next, an enhanced black hole algorithm dealing with multiobjective supply chain model is presented. The sensitivity analysis of the heuristic black hole optimization method is also described to check the efficiency of new operators to increase the convergence of the algorithm. Numerical results with different datasets demonstrate how the proposed model supports the efficiency, flexibility, and reliability of the consignment-store-based supply chain.

[Current status of bio-based materials industry in China].

Science.gov (United States)

Diao, Xiaoqian; Weng, Yunxuan; Huang, Zhigang; Yang, Nan; Wang, Xiyuan; Zhang, Min; Jin, Yujuan

2016-06-25

In recent years, bio-based materials are becoming a new dominant industry leading the scientific and technological innovation, and economic development of the world. We reviewed the new development of bio-based materials industry in China, analyzed the entire market of bio-based materials products comprehensively, and also stated the industry status of bio-based chemicals, such as lactic acid, 1,3-propanediol, and succinic acid; biodegradable bio-based polymers, such as co-polyester of diacid and diol, polylactic acid, carbon dioxide based copolymer, polyhydroxyalknoates, polycaprolactone, and thermoplastic bio-based plastics; non-biodegradable bio-based polymers, such as bio-based polyamide, polytrimethylene terephthalate, bio-based polyurethane, and bio-based fibers.

CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT

International Nuclear Information System (INIS)

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2002-01-01

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility hydrolysis production has been completed to produce lignin for co-fire testing and the lignin fuel was washed and dewatered. Both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation and co-firing. EERC has received coal typical of the fuel to the TVA-Colbert boilers. This material was used at EERC as baseline material and for mixing with the bio-fuel for combustion testing. All the combustion and fuel handling tests at EERC have been completed. During fuel preparation EERC reported no difficulties in fuel blending and handling. Preliminary co-fire test results indicate that the blending of lignin and bio-solids with the Colbert coal blend generally reduces NO(sub x) emissions, increases the reactivity of the coal, and increases the ash deposition rate on superheater surfaces. Deposits produced from the fuel blends, however, are more friable and hence easier to remove from tube surfaces relative to those produced from the baseline Colbert coal blend. The final co-fire testing report is being prepared at EERC and will be completed by the end of the second quarter of 2002. The TVA-Colbert facility has neared completion of the task to evaluate co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been

The BonaRes Centre - A virtual institute for soil research in the context of a sustainable bio-economy

Science.gov (United States)

Wollschläger, Ute; Helming, Katharina; Heinrich, Uwe; Bartke, Stephan; Kögel-Knabner, Ingrid; Russell, David; Eberhardt, Einar; Vogel, Hans-Jörg

2016-04-01

Fertile soils are central resources for the production of biomass and provision of food and energy. A growing world population and latest climate targets lead to an increasing demand for both, food and bio-energy, which require preserving and improving the long-term productivity of soils as a bio-economic resource. At the same time, other soil functions and ecosystem services need to be maintained. To render soil management sustainable, we need to establish a scientific knowledge base about complex soil system processes that allows for the development of model tools to quantitatively predict the impact of a multitude of management measures on soil functions. This, finally, will allow for the provision of site-specific options for sustainable soil management. To face this challenge, the German Federal Ministry of Education and Research recently launched the funding program "Soil as a Natural Resource for the Bio-Economy - BonaRes". In a joint effort, ten collaborative projects and the coordinating BonaRes Centre are engaged to close existing knowledge gaps for a profound and systemic understanding of soil functions and their sensitivity to soil management. This presentation provides an overview of the concept of the BonaRes Centre which is responsible for i) setting up a comprehensive data base for soil-related information, ii) the development of model tools aiming to estimate the impact of different management measures on soil functions, and iii) establishing a web-based portal providing decision support tools for a sustainable soil management. A specific focus of the presentation will be laid on the so-called "knowledge-portal" providing the infrastructure for a community effort towards a comprehensive meta-analysis on soil functions as a basis for future model developments.

Challenges of Tagging Goods in Supply Chains and a Cloud Perspective with Focus on Some Transitional Economies

Directory of Open Access Journals (Sweden)

Sanja Bauk

2017-02-01

Full Text Available This paper considers some of the barriers in implementing the RFID (radio frequency identification technology for identifying, locating, tracking and tracing goods in supply chains, along with a model for adopting cloud services that can mitigate these obstacles in the transitional environment. The analysis is based on the assessments of the implementation impediments, given by the experts in the field of logistics: university professors, assistants and entrepreneurs from three Western Balkan countries (Montenegro, Serbia, and Bosnia and Herzegovina. Since the professionals’ assessments are influenced by their experiences from the transitional economies, which are faced with limited abilities to invest in expensive business information systems, the main hypothesis is that moving the logistics into the cloud may resolve or at least alleviate the considered problems. On the basis of the available secondary literature resources on pros and cons of RFID implementation into supply chains, and the statistical analysis of the consciously completed questionnaires in the survey, the model for adopting cloud services for providing RFID-enabled goods and related activities in the considered economies is proposed at a logical level. The paper also gives some directions for further research work in this domain.

Bio diesel, v. 15(58)

International Nuclear Information System (INIS)

Gicheva, Ljubitsa

2007-01-01

The history of bio-fuels/bio-diesel is more political and economical than it is technological. The technology of the production is the same as it was 200 years ago. The economy closed the usage of bio-fuels in the middies of the 20 Th century and put it back on the agenda of the world economy at the beginning of the 21 st century. With price of more then 70 US$ per barrel of grudge oil, production and usage of bio-fuels becomes more economical category rather than political and ecological. If we, additionally, add secondary, yet nowadays very important factors, as ecological protection, recycling the emission of poisonous gasses, exploitation of agro sector, then the reincarnation of bio-fuels is very interesting, and for Macedonia a potentially strategic category. The basics of the biography is to follow in the article paying special attention on the characteristics, standards, production, processing and usage of the bio-diesel fuel as well as the blended B20 and B5. (Author)

Bio diesel, v. 15(59)

International Nuclear Information System (INIS)

Gicheva, Ljubitsa

2007-01-01

The history of bio-fuels/bio-diesel is more political and economical than it is technological. The technology of the production is the same as it was 200 years ago. The economy closed the usage of bio-fuels in the middies of the 20 Th century and put it back on the agenda of the world economy at the beginning of the 21 st century. With price of more then 70 US$ per barrel of grudge oil, production and usage of bio-fuels becomes more economical category rather than political and ecological. If we, additionally, add secondary, yet nowadays very important factors, as ecological protection, recycling the emission of poisonous gasses, exploitation of agro sector, then the reincarnation of bio-fuels is very interesting, and for Macedonia a potentially strategic category. The basics of the biography is to follow in the article paying special attention on the characteristics, standards, production, processing and usage of the bio-diesel fuel as well as the blended B20 and B5. (Author)

Knowledge Based Economy Assessment

OpenAIRE

Madalina Cristina Tocan

2012-01-01

The importance of knowledge-based economy (KBE) in the XXI century is evident. In the article the reflection of knowledge on economy is analyzed. The main point is targeted to the analysis of characteristics of knowledge expression in economy and to the construction of structure of KBE expression. This allows understanding the mechanism of functioning of knowledge economy. The authors highlight the possibility to assess the penetration level of KBE which could manifest itself trough the exist...

Sustainable bio-based materials: opportunities and challenges

NARCIS (Netherlands)

van der Meer, Yvonne

2017-01-01

Research in the area of bio-based materials aims to achieve breakthroughs in bio-based materials development. A novel way is presented to organise bio-based materials research with a value chain approach in which sustainability research is integrated in the research program. This research approach

Circular economy practices among Chinese manufacturers varying in environmental-oriented supply chain cooperation and the performance implications.

Science.gov (United States)

Zhu, Qinghua; Geng, Yong; Lai, Kee-hung

2010-06-01

The rapidly growing industrial activities in emerging economies such as China have been causing resource depletion and pollution problems. This reality requires China to adopt an integrated management approach to resolve the conflict between industrial development and environmental protection, and the concept of circular economy (CE) serves this purpose. In this paper, we examine if different types of manufacturing enterprises on environmental-oriented supply chain cooperation (ESCC) exist. We also determine if the Chinese manufacturer types varying in ESCC differ in their implementation of the CE practices towards achieving the CE-targeted goals on improving both environmental and economic performance. Our cluster analytic results with multivariate analysis of variance (MANOVA) among the four identified types of Chinese manufacturers varying in environmental-oriented supply chain cooperation highlight the importance to intensify the cooperation with upstream and downstream supply chain partners for a CE initiative to succeed. (c) 2010 Elsevier Ltd. All rights reserved.

[Preface for special issue on bio-based materials (2016)].

Science.gov (United States)

Weng, Yunxuan

2016-06-25

Bio-based materials are new materials or chemicals with renewable biomass as raw materials such as grain, legume, straw, bamboo and wood powder. This class of materials includes bio-based polymer, biobased fiber, glycotechnology products, biobased rubber and plastics produced by biomass thermoplastic processing and basic biobased chemicals, for instance, bio-alcohols, organic acids, alkanes, and alkenes, obtained by bio-synthesis, bio-processing and bio-refinery. Owing to its environmental friendly and resource conservation, bio-based materials are becoming a new dominant industry taking the lead in the world scientific and technological innovation and economic development. An overview of bio-based materials development is reported in this special issue, and the industrial status and research progress of the following aspects, including biobased fiber, polyhydroxyalkanoates, biodegradable mulching film, bio-based polyamide, protein based biomedical materials, bio-based polyurethane, and modification and processing of poly(lactic acid), are introduced.

Bio-Based Polymers with Potential for Biodegradability

Directory of Open Access Journals (Sweden)

Thomas F. Garrison

2016-07-01

Full Text Available A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid (PLA, widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.

The contribution of microbial biotechnology to economic growth and employment creation.

Science.gov (United States)

Timmis, Kenneth; de Lorenzo, Victor; Verstraete, Willy; Ramos, Juan Luis; Danchin, Antoine; Brüssow, Harald; Singh, Brajesh K; Timmis, James Kenneth

2017-09-01

Our communication discusses the profound impact of bio-based economies - in particular microbial biotechnologies - on SDG 8: Promote sustained, inclusive and sustainable economic growth, full and productive employment and decent work for all. A bio-based economy provides significant potential for improving labour supply, education and investment, and thereby for substantially increasing the demographic dividend. This, in turn, improves the sustainable development of economies. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Leading global energy and environmental transformation: Unified ASEAN biomass-based bio-energy system incorporating the clean development mechanism

International Nuclear Information System (INIS)

Lim, Steven; Lee, Keat Teong

2011-01-01

In recent years, the ten member countries in the Association of Southeast Asia Nations (ASEAN) have experienced high economic growth and, in tandem, a substantial increment in energy usage and demand. Consequently, they are now under intense pressure to secure reliable energy supplies to keep up with their growth rate. Fossil fuels remain the primary source of energy for the ASEAN countries, due to economic and physical considerations. This situation has led to unrestrained emissions of greenhouse gases to the environment and thus effectively contributes to global climate change. The abundant supply of biomass from their tropical environmental conditions offers great potential for ASEAN countries to achieve self-reliance in energy supplies. This fact can simultaneously transform into the main driving force behind combating global climate change, which is associated with the usage of fossil fuels. This research article explores the potential and advantages for ASEAN investment in biomass-based bio-energy supply, processing and distribution network with an emphasis on regional collaborations. It also investigates the implementation and operational challenges in terms of political, economic and technical factors for the cross-border energy scheme. Reliance of ASEAN countries on the clean development mechanism (CDM) to address most of the impediments in developing the project is also under scrutiny. Unified co-operation among ASEAN countries in integrating biomass-based bio-energy systems and utilising the clean development mechanism (CDM) as the common effort could serve as the prime example for regional partnerships in achieving sustainable development for the energy and environmental sector in the future. -- Highlights: →A study that explores feasibility for ASEAN investment in biomass-based bio-energy. →Focus is given on regional supply, processing and distribution network. →Cross-border implementation and operational challenges are discussed thoroughly.

The solar energy based global economy. A policy leading to the ecological era

International Nuclear Information System (INIS)

Scheer, H.

1999-01-01

Bound in its fossil energy and raw materials supply chains, the global economy is heading for a global ecological crisis and dramatically aggravating conflicts. Moreover, this exclusive dependence on fossil energy and materials resources forces a global concentration process increasingly undermining democratic and free market systems. But the will to survive is not the only reason to consider a new industrial revolution to be imperative. Such a sweeping change, from a fossil energy based regime to a system relying exclusively on renewable energy sources and raw materials, would open up unique opportunities for the evolution of a peaceful and democratic global economy fostering the development of superior technologies and sustainable regional economic systems. The author of the book elaborates the scenario permitting such a radical change, and explains the necessary basic approaches and appropriate policies relating to technology, the economy, ecology, and the social system. The ultimate goal is that the evolution of the solar energy based global economy will be accompanied by an intrinsic economic driving force eventually leading to an ecological era. (orig./CB) [de

Towards reinforcement solutions for urban fibre/fabric waste using bio-based biodegradable resins.

Science.gov (United States)

Agrawal, Pramod; Hermes, Alina; Bapeer, Solaf; Luiken, Anton; Bouwhuis, Gerrit; Brinks, Ger

2017-10-01

The main research question is how to systematically define and characterize urban textile waste and how to effectively utilise it to produce reinforcement(s) with selected bio-based biodegradable resin(s). Several composite samples have been produced utilising predominantly natural and predominantly synthetic fibres by combining loose fibres with PLA, nonwoven fabric with PLA, woven fabric with PLA, two-layer composite & four-layer composite samples. Physio-chemical characterisations according to the established standards have been conducted. The present work is a step toward the circular economy and closing the loop in textile value chain.

Bio-based liquid crystalline polyesters

Science.gov (United States)

Wilsens, Carolus; Rastogi, Sanjay; Dutch Collaboration

2013-03-01

The reported thin-film polymerization has been used as a screening method in order to find bio-based liquid crystalline polyesters with convenient melting temperatures for melt-processing purposes. An in depth study of the structural, morphological and chemical changes occurring during the ongoing polycondensation reactions of these polymers have been performed. Structural and conformational changes during polymerization for different compositions have been followed by time resolved X-ray and Infrared spectroscopy. In this study, bio-based monomers such as vanillic acid and 2,5-furandicarboxylic acid are successfully incorporated in liquid crystalline polyesters and it is shown that bio-based liquid crystalline polymers with high aromatic content and convenient processing temperatures can be synthesized. Special thanks to the Dutch Polymer Institute for financial support

Fiscal policy multipliers : The role of monopolistic competition, scale economies, and intertemporal substitution in labour supply

NARCIS (Netherlands)

Heijdra, BJ

A dynamic macroeconomic model of monopolistic competition is developed for the closed economy. Forward looking consumers demand differentiated goods, supply labour, and save part of their income in the form of shares. Producers manufacture the differentiated goods by using labour and capital. We

A comparison of pipeline versus truck transport of bio-oil.

Science.gov (United States)

Pootakham, Thanyakarn; Kumar, Amit

2010-01-01

Biomass-based energy and fuels are receiving attention because they are considered carbon neutral; i.e. the amount of CO(2) released during combustion of this biomass is nearly the same as that taken up by the plants during their growth. Bio-oil is a dark viscous liquid consisting of hydrocarbons. These are produced by fast pyrolysis of biomass. "As-is" biomass material has a low energy density (MJ m(-3)), hence, the cost of transporting this energy is high. Bio-oil has a high energy density as compared to "as-is" biomass material, consequently it helps in reducing the cost of energy transport. This study compares the life cycle assessment of transportation of bio-oil by pipeline with that by truck. The scope of the work includes the transportation of bio-oil by truck or pipeline from a centralized plant (supplied with forest biomass) to an end-user. Two cases are studied for pipeline transport of bio-oil: the first case considers a coal-based electricity supply for pumping the bio-oil through a pipeline; the second case considers an electricity supply from a renewable resource. The two cases of pipeline transport are compared to two cases of truck transport (truck trailer and super B-train truck). The life cycle greenhouse gas (GHG) emissions from the pipeline transport of bio-oil for the two cases of electricity supply are 345 and 17 g of CO(2) m(-3) km(-1), respectively. Similar values for transport by trailer (capacity - 30 m(3)) and super B-train truck (capacity - 60 m(3)) are 89 and 60 g of CO(2) m(-3) km(-1), respectively. Energy input for bio-oil transport is 3.95 MJ m(-3) km(-1) by pipeline, 2.59 MJ m(-3) km(-1) by truck and 1.66 MJ m(-3) km(-1) by super B-train truck. The results show that GHG emissions in pipeline transport are largely dependent on the source of electricity (higher for coal-based electricity). Substituting 250 m(3) day(-1) of pipeline-transported bio-oil for coal-based electricity can mitigate about 5.1 million tonnes of CO(2) per year

Exploring the implementation of a circular economy strategy: the case of a closed-loop supply of aluminum beverage cans

DEFF Research Database (Denmark)

Stewart, Raphaëlle Marie Marianne; Niero, Monia; Murdock, Karen

2018-01-01

The circular economy concept provides a key opportunity to address the challenge of resource scarcity for both policy makers and industries. Companies are urged to play their part and integrate circular economy in their business. However, little has been said about how implementation should occur...... and the consequences for the industry. This paper explores possibilities for the business implementation of a beverage producer’s circular economy strategy, which consists in setting up a closed-loop supply of aluminum beverage cans. For this purpose, we develop a business model-inspired framework derived from...

Biological standards for the Knowledge-Based BioEconomy: What is at stake.

Science.gov (United States)

de Lorenzo, Víctor; Schmidt, Markus

2018-01-25

The contribution of life sciences to the Knowledge-Based Bioeconomy (KBBE) asks for the transition of contemporary, gene-based biotechnology from being a trial-and-error endeavour to becoming an authentic branch of engineering. One requisite to this end is the need for standards to measure and represent accurately biological functions, along with languages for data description and exchange. However, the inherent complexity of biological systems and the lack of quantitative tradition in the field have largely curbed this enterprise. Fortunately, the onset of systems and synthetic biology has emphasized the need for standards not only to manage omics data, but also to increase reproducibility and provide the means of engineering living systems in earnest. Some domains of biotechnology can be easily standardized (e.g. physical composition of DNA sequences, tools for genome editing, languages to encode workflows), while others might be standardized with some dedicated research (e.g. biological metrology, operative systems for bio-programming cells) and finally others will require a considerable effort, e.g. defining the rules that allow functional composition of biological activities. Despite difficulties, these are worthy attempts, as the history of technology shows that those who set/adopt standards gain a competitive advantage over those who do not. Copyright © 2017 Elsevier B.V. All rights reserved.

Design and Experimental Verification of a 0.19 V 53 μW 65 nm CMOS Integrated Supply-Sensing Sensor With a Supply-Insensitive Temperature Sensor and an Inductive-Coupling Transmitter for a Self-Powered Bio-sensing System Using a Biofuel Cell.

Science.gov (United States)

Kobayashi, Atsuki; Ikeda, Kei; Ogawa, Yudai; Kai, Hiroyuki; Nishizawa, Matsuhiko; Nakazato, Kazuo; Niitsu, Kiichi

2017-12-01

In this paper, we present a self-powered bio-sensing system with the capability of proximity inductive-coupling communication for supply sensing and temperature monitoring. The proposed bio-sensing system includes a biofuel cell as a power source and a sensing frontend that is associated with the CMOS integrated supply-sensing sensor. The sensor consists of a digital-based gate leakage timer, a supply-insensitive time-domain temperature sensor, and a current-driven inductive-coupling transmitter and achieves low-voltage operation. The timer converts the output voltage from a biofuel cell to frequency. The temperature sensor provides a pulse width modulation (PWM) output that is not dependent on the supply voltage, and the associated inductive-coupling transmitter enables proximity communication. A test chip was fabricated in 65 nm CMOS technology and consumed 53 μW with a supply voltage of 190 mV. The low-voltage-friendly design satisfied the performance targets of each integrated sensor without any trimming. The chips allowed us to successfully demonstrate proximity communication with an asynchronous receiver, and the measurement results show the potential for self-powered operation using biofuel cells. The analysis and experimental verification of the system confirmed their robustness.

Prospects for a bio-based succinate industry.

Science.gov (United States)

McKinlay, James B; Vieille, C; Zeikus, J Gregory

2007-09-01

Bio-based succinate is receiving increasing attention as a potential intermediary feedstock for replacing a large petrochemical-based bulk chemical market. The prospective economical and environmental benefits of a bio-based succinate industry have motivated research and development of succinate-producing organisms. Bio-based succinate is still faced with the challenge of becoming cost competitive against petrochemical-based alternatives. High succinate concentrations must be produced at high rates, with little or no by-products to most efficiently use substrates and to simplify purification procedures. Herein are described the current prospects for a bio-based succinate industry, with emphasis on specific bacteria that show the greatest promise for industrial succinate production. The succinate-producing characteristics and the metabolic pathway used by each bacterial species are described, and the advantages and disadvantages of each bacterial system are discussed.

Bio-based chemicals - green, but also sustainable?

DEFF Research Database (Denmark)

Ögmundarson, Ólafur; Herrgard, Markus; Förster, Jochen

For almost two decades, the chemical industry has put great effort into developing bio-chemicals,among others to fight global warming caused by greenhouse gas emissions, one of the biggest threats that are faced by our society today. To facilitate a growing and versatile bio-based chemical...... production, the US Department of Energy proposed in 2004 a list of 12 building block chemicals which can either be converged through biological or chemical conversions. Moving toward more bio-based chemicals, the chemical industry does not only claim to reduce climate change impacts, but also...... that they are increasing overall sustainability in chemical production. Whether such claims are justifiable is unclear. When sustainability of bio-based polymer production is assessed, various environmental trade-offs occur that need to be considered. It is not enough to claim that a bio-chemical is sustainable...

Integrating bioenergy into a green economy: identifying opportunities and constraints

CSIR Research Space (South Africa)

Von Maltitz, Graham P

2012-10-01

Full Text Available .kashan.co.za] BACKGROUND Bioenergy is a renewable energy option that has the potential to contribute to a low-carbon development path and stimulate a green economy. However, since bioenergy uses land and natural resources, it is in competition with the valuable bio... an analytical framework and decision-support tools to assist in assessing, managing and monitoring the sustainability of bioenergy. IMPROVING THE SUSTAINABILITY OF BIOENERGY THROUGH INTEGRATION WITH OTHER BIO-BASED PRODUCTS Since bioenergy production...

Multi-scale exploration of the technical, economic, and environmental dimensions of bio-based chemical production.

Science.gov (United States)

Zhuang, Kai H; Herrgård, Markus J

2015-09-01

In recent years, bio-based chemicals have gained traction as a sustainable alternative to petrochemicals. However, despite rapid advances in metabolic engineering and synthetic biology, there remain significant economic and environmental challenges. In order to maximize the impact of research investment in a new bio-based chemical industry, there is a need for assessing the technological, economic, and environmental potentials of combinations of biomass feedstocks, biochemical products, bioprocess technologies, and metabolic engineering approaches in the early phase of development of cell factories. To address this issue, we have developed a comprehensive Multi-scale framework for modeling Sustainable Industrial Chemicals production (MuSIC), which integrates modeling approaches for cellular metabolism, bioreactor design, upstream/downstream processes and economic impact assessment. We demonstrate the use of the MuSIC framework in a case study where two major polymer precursors (1,3-propanediol and 3-hydroxypropionic acid) are produced from two biomass feedstocks (corn-based glucose and soy-based glycerol) through 66 proposed biosynthetic pathways in two host organisms (Escherichia coli and Saccharomyces cerevisiae). The MuSIC framework allows exploration of tradeoffs and interactions between economy-scale objectives (e.g. profit maximization, emission minimization), constraints (e.g. land-use constraints) and process- and cell-scale technology choices (e.g. strain design or oxygenation conditions). We demonstrate that economy-scale assessment can be used to guide specific strain design decisions in metabolic engineering, and that these design decisions can be affected by non-intuitive dependencies across multiple scales. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Inter-organizational collaboration in bio-based business

NARCIS (Netherlands)

Nuhoff-Isakhanyan, Gohar

2016-01-01

Globally, bio-based business is often perceived as sustainable, because its renewable production can potentially lower carbon and greenhouse emissions by substituting fossil-fuel-based production, reduce environmental sourcing problems, and create turnover and jobs. However, bio-based business

Future Economy and Touristic Entrepreneurship

Directory of Open Access Journals (Sweden)

Viorica Jelev

2016-09-01

Full Text Available Specialists claim that Eco-Bio-economy or social economy is the economy of future, in the service of human life by the rational use of environmental resources. The concept brings together in an integrated manner, according to the researchers, economy, ecology, biodiversity, biotechnologies and focuses on integrated sustainable development of the world. The new social economy, together with the corporate social responsibility joins a new multipolar world to a healthy environment by creative and innovative concepts that will ensure the sustainability of living in a sustainable manner. Doctors have added to thisEco-Bio-Economy concept a new one called One Health - a new integrated approach for human, animals and environment health state to that they should emphasize the importance of human behavior upon the planet biodiversity. Economer agents have mostly understood the importance of alarm signals drawn up by researchers on the destruction of the resources of the planet and adapted their business sites to the requirements of the green economy. A responsible business is also ecotourism that promotes a favourable travel for the surrounding environment. It requires accommodation on farms, in peasant houses, small rural hotels. The educational environment contributes to the trend planetary tourism, with the formation of new specialists with new knowledge, behaviors and consumers use formation of new characters, sensitive to environmental issues. This educational model is also promoted by Spiru Haret University, by creating the Master degree in tourism but also in environmental protection.

BioMeeT. Planning of biomass based methanol energy combine - Trollhaettan region. Final report

Energy Technology Data Exchange (ETDEWEB)

Brandberg, Aake; Hjortsberg, Hans; Saevbark, Bengt [Ecotraffic R and D AB, Stockholm (Sweden); Ekbom, Tomas; Hjerpe, Carl-Johan; Landaelv, Ingvar [Nykomb Synergetics AB, Stockholm (Sweden)

2000-04-01

The conversion of biomass in an energy combine based on primary gasification yields a gas that can be used as fuels gas, for synthesis of motor fuels (methanol or other) or for electric power production. The study gives examples of alternative product mixes. The conclusions of the study are: (1) Potential of new, not yet utilised biomass is available, and new areas of applications, where oil is presently used, are needed to develop the potential. Motor fuel production (methanol, DME) is a presumption in the BioMeeT-study. (2) Yield figures in the energy combine are comparable to those of now used bio-systems for power and co-generation. (3) Which one of the cases in the BioMeeT-project is the most favourable cannot be decided on a plant-to-plant basis alone but the entire system for supply energy carriers in the region has to be considered, as the all plants within the system may change. This would require further investigations. Moreover, the results will be different in various regions in Sweden and Europe due to the markets for all energy carriers. (4) At today's conditions in the Trollhaettan region it must be stated that there is only room for dedicated bio-methanol/DME production (provided such a market will come) with moderate addition to the district heating system as in the BAL-project. (5) In the longer term the future supply of all energy carriers, including new electric power and new bio-fuels, has to be considered for new plants and at renewals. In such a case an energy combine as in the BioMeeT-project may be a central conversion plant with gas deliveries to satellites such as local co-generation, district heat and industries in a regional system within a 50 - 100 km radius. This should be included in regional planning for the future. (6) Estimated investment costs per kW feedstock input is higher for the energy combine compared to present technologies (mature technologies for power and heat) but have to be judged for all plants taken together in

BioMeeT. Planning of biomass based methanol energy combine - Trollhaettan region. Final report

Energy Technology Data Exchange (ETDEWEB)

Brandberg, Aake; Hjortsberg, Hans; Saevbark, Bengt [Ecotraffic R and D AB, Stockholm (Sweden); Ekbom, Tomas; Hjerpe, Carl-Johan; Landaelv, Ingvar [Nykomb Synergetics AB, Stockholm (Sweden)

2000-04-01

The conversion of biomass in an energy combine based on primary gasification yields a gas that can be used as fuels gas, for synthesis of motor fuels (methanol or other) or for electric power production. The study gives examples of alternative product mixes. The conclusions of the study are: (1) Potential of new, not yet utilised biomass is available, and new areas of applications, where oil is presently used, are needed to develop the potential. Motor fuel production (methanol, DME) is a presumption in the BioMeeT-study. (2) Yield figures in the energy combine are comparable to those of now used bio-systems for power and co-generation. (3) Which one of the cases in the BioMeeT-project is the most favourable cannot be decided on a plant-to-plant basis alone but the entire system for supply energy carriers in the region has to be considered, as the all plants within the system may change. This would require further investigations. Moreover, the results will be different in various regions in Sweden and Europe due to the markets for all energy carriers. (4) At today's conditions in the Trollhaettan region it must be stated that there is only room for dedicated bio-methanol/DME production (provided such a market will come) with moderate addition to the district heating system as in the BAL-project. (5) In the longer term the future supply of all energy carriers, including new electric power and new bio-fuels, has to be considered for new plants and at renewals. In such a case an energy combine as in the BioMeeT-project may be a central conversion plant with gas deliveries to satellites such as local co-generation, district heat and industries in a regional system within a 50 - 100 km radius. This should be included in regional planning for the future. (6) Estimated investment costs per kW feedstock input is higher for the energy combine compared to present technologies (mature technologies for power and heat) but have to be judged for all plants taken together in the

Sustainable Power Supply Solutions for Off-Grid Base Stations

Directory of Open Access Journals (Sweden)

Asma Mohamad Aris

2015-09-01

Full Text Available The telecommunication sector plays a significant role in shaping the global economy and the way people share information and knowledge. At present, the telecommunication sector is liable for its energy consumption and the amount of emissions it emits in the environment. In the context of off-grid telecommunication applications, off-grid base stations (BSs are commonly used due to their ability to provide radio coverage over a wide geographic area. However, in the past, the off-grid BSs usually relied on emission-intensive power supply solutions such as diesel generators. In this review paper, various types of solutions (including, in particular, the sustainable solutions for powering BSs are discussed. The key aspects in designing an ideal power supply solution are reviewed, and these mainly include the pre-feasibility study and the thermal management of BSs, which comprise heating and cooling of the BS shelter/cabinets and BS electronic equipment and power supply components. The sizing and optimization approaches used to design the BSs’ power supply systems as well as the operational and control strategies adopted to manage the power supply systems are also reviewed in this paper.

Challenges for bio-based products in sustainable value chains

NARCIS (Netherlands)

Cardon, L.; Lin, J.W.; De Groote, M.; Ragaert, K.; Kopecka, J.A.; Koster, R.P.

2011-01-01

This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referred to as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chains including activities after end-of-life of

Primary Food Processing : Cornerstone of plant-based food production and the bio-economy in Europe

NARCIS (Netherlands)

Logatcheva, K.; Galen, van M.A.

2015-01-01

This report describes the supply chains and special characteristics of plant-based primary food processors; producers of (wheat) flour, starches, vegetable oils and fats, sugar, and cocoa. The production value, direct employment in the industry, and indirect employment in farming were calculated.

Optimization of the green gas supply chain. Identification of critical choices in designing an efficient (from an energetic and economic perspective) green gas supply chain.

NARCIS (Netherlands)

Grond, Lukas

2010-01-01

Summary Global climate change and the need for security of energy supply drive the development of bio-energy production and utilization. Green gas is defined as bio-based gas that has been upgraded to natural gas quality. Amongst other energy carriers, g

Bio energy - Environment, technique and market

International Nuclear Information System (INIS)

Hohle, Erik Eid

2001-01-01

Leading abstract. In this book, a group of experts discusses everything about the use of bio fuels, from the briquettes of dry alder used in automobile gas generators during World War II to the most advanced present-day use. The chapters are: (1) Energy and society, (2) Production of biomass, (3) Bio fuel - properties and production, (4) Bio fuel - conversion and use, (5) Environment and environmental engineering, (6) Economy and planning and (7) Bio energy in the energy system of the future. There is a list of literature and a glossary at the end of the book

Outlook of Japan's economy and energy demand for FY2017

International Nuclear Information System (INIS)

Aoshima, Momoko; Yorita, Y.; Tsunoda, M.

2017-01-01

This paper disclosed the prospects of Japan's economy and energy demand as the standard scenario, with the following major preconditions in mind: (1) world economy grows moderately, (2) supply and demand of crude oil are gently balanced, (3) exchange rate is Yen110/$, (4) nuclear power generation gradually moves back to operation, and the number of cumulative reopening units until the end of FY2017 reaches 14, and (5) supply and demand of electric power can secure 3% supply reserve ratio necessary for stable supply of electricity nationwide. In addition, this paper carried out evaluation analyses on the following various influences: macro economy, production activity, primary energy domestic supply, final energy consumption, electricity sales volume and power source composition (electric power companies), city gas sales volume (gas companies), fuel oil and LPG sales volume and crude oil throughput, renewable energy power generation, impact of nuclear power plant restart base, income/expenditure for on renewable energy generation, and impact of realization of large scale coal thermal power plant plan. (A.O.)

New inclinations of research, development and innovation for public forest in regard to bio-economy perspectives

International Nuclear Information System (INIS)

Deleuze, Christine; Richter, Claudine; Ulrich, Erwin; Musch, Brigitte; Descroix, Laurent; Pousse, Noemie; Legay, Myriam; Dreyfus, Philippe; Bock, Jerome; Riond, Catherine

2016-01-01

The area of French forest has grew by 60% in a century, and is at the fourth position on the European rank; Its harvesting was doubled at the same time; however the national trade-balance of the wood products sector is still in deficit. This forest is also facing important changes: climatic (composition and productivity of forest are affected, frequency and intensity of forest disturbances increase), societal (workers are fewer in the forest and we are more aware of benefits and services to society provided by forest) and bio-economic (fossil resources decrease and we need of renewable materials). Wood is a versatile material which is renewable and can be used from construction, furniture to pulp and composite material, with a final recycling in energy. This cascading use of wood products enables a low carbon production of materials and energy, particularly effective for new challenges in bio-economy. To address this joint challenge of stronger and differentiated demands on wood resource and threats and constraints on the forest, some innovations and research of the public forest service are presented in this paper. The diversity of solutions (in harvesting, silvicultural treatment, species, soil monitoring...) underlines the potential of innovations in forest management and the need to mix and transfer them. (authors)

Bio refinery: towards a Biomass-based Sustainable Economy; Biorrefineria: hacia una economia sostenible basada en la biomasa

Energy Technology Data Exchange (ETDEWEB)

Ballesteros Perdices, M.

2010-07-01

At present, biomass is converted into energy in separate installations that have little capacity to obtain many products (ethanol, fatty acid esters, heat, electricity, etc) and that do not take advantage of all the economic potential offered by biomass. The future development of biomass as an energy source will be based on a single installation where all the fractions and byproducts of the biomass will be used to produce a large range of products: energy, bio fuels, chemicals and biomaterials. (Author) 1 refs.

ELSAM/ELKRAFT: Draft for the plan of management for bio-energy. ELSAM/ELKRAFT: The electricity companies' programme for gasification of coal and biomass

International Nuclear Information System (INIS)

1992-08-01

The Danish power companies have, since the middle of the 80's carried through a technology development effort for the use of bio-fuels in power (and dual-purpose power) plants. This note concerns the current status of the development and a sketch for an action programme for future effort. Straw is the largest unexploited potential. The use of bio-fuels does not produce so much carbon dioxide, but on the other hand biomass supply can fluctuate. Biofuels are also difficult to stoke, and expensive. Close co-operation between agriculture and forestry is necessary and risks are high for the involved sectors. It must be possible to use bio-fuels combined with coal to secure a sturdy and economic energy production, it is necessary to have a stable energy and industrial policy to maintain interest in the long term development effort, the contrasts of interest between natural gas and bio-fuels on the decentralized thermal power market must be clarified and the prices of bio-fuels must be made competitive by making supply and subsidies more effective. The main areas for future development are the bio-fuel resources, logistics and economy, straw in central power plants, gasification of coal and biomass, bio-fuels in decentralized cogeneration plants, biogas plants, conversion of biomass to synthetic fuels etc. A close co-ordination of ELSAM/ELKRAFT's development activities and cooperation between organizations in Denmark and abroad should be aimed at. (AB)

Knowledge based economy in European Union

Directory of Open Access Journals (Sweden)

Ecaterina Stănculescu

2012-04-01

Full Text Available Nowadays we assist at a fundamental change from the economy based mainly on resources to the one based mostly on knowledge. The concept has been launched in the last decade of the past century. The knowledge became a production agent and a value creation instrument for whatever country and of course for an entire community like European Union which is constantly concerned by its development and competitiveness. This paper presents the principal characteristics of the present EU preoccupations with the expansion of a knowledge based economy through the 2020 European Development Strategy for smart, sustainable and inclusive economy, and especially for the Framework Programs (Framework Programme 7 and Competitiveness and Innovation Framework Programme.

A brief review of extrusion-based tissue scaffold bio-printing.

Science.gov (United States)

Ning, Liqun; Chen, Xiongbiao

2017-08-01

Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion-based bio-printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio-printing and manipulation of multiple materials and cells in bio-printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion-based bio-printing for scaffold fabrication, focusing on the prior-printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to-date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi-materials/cells manipulation, and process-induced cell damage in extrusion-based bio-printing. The key issue and challenges for extrusion-based bio-printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio-printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio-printing. The address of these challenges will significantly enhance the capability of extrusion-based bio-printing. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microbial conversion of biomass into bio-based polymers.

Science.gov (United States)

Kawaguchi, Hideo; Ogino, Chiaki; Kondo, Akihiko

2017-12-01

The worldwide market for plastics is rapidly growing, and plastics polymers are typically produced from petroleum-based chemicals. The overdependence on petroleum-based chemicals for polymer production raises economic and environmental sustainability concerns. Recent progress in metabolic engineering has expanded fermentation products from existing aliphatic acids or alcohols to include aromatic compounds. This diversity provides an opportunity to expand the development and industrial uses of high-performance bio-based polymers. However, most of the biomonomers are produced from edible sugars or starches that compete directly with food and feed uses. The present review focuses on recent progress in the microbial conversion of biomass into bio-based polymers, in which fermentative products from renewable feedstocks serve as biomonomers for the synthesis of bio-based polymers. In particular, the production of biomonomers from inedible lignocellulosic feedstocks by metabolically engineered microorganisms and the synthesis of bio-based engineered plastics from the biological resources are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation.

Science.gov (United States)

Liang, Sai; Qu, Shen; Xu, Ming

2016-02-02

To develop industry-specific policies for mitigating environmental pressures, previous studies primarily focus on identifying sectors that directly generate large amounts of environmental pressures (a.k.a. production-based method) or indirectly drive large amounts of environmental pressures through supply chains (e.g., consumption-based method). In addition to those sectors as important environmental pressure producers or drivers, there exist sectors that are also important to environmental pressure mitigation as transmission centers. Economy-wide environmental pressure mitigation might be achieved by improving production efficiency of these key transmission sectors, that is, using less upstream inputs to produce unitary output. We develop a betweenness-based method to measure the importance of transmission sectors, borrowing the betweenness concept from network analysis. We quantify the betweenness of sectors by examining supply chain paths extracted from structural path analysis that pass through a particular sector. We take China as an example and find that those critical transmission sectors identified by betweenness-based method are not always identifiable by existing methods. This indicates that betweenness-based method can provide additional insights that cannot be obtained with existing methods on the roles individual sectors play in generating economy-wide environmental pressures. Betweenness-based method proposed here can therefore complement existing methods for guiding sector-level environmental pressure mitigation strategies.

Status of bio energy based on forest material - from the stub to the stove door; Status for bioenergi basert paa skogsvirke - fra stubben til ovnsdoera

Energy Technology Data Exchange (ETDEWEB)

Lileng, Joern K.; Gjoelsjoe, Simen

1999-07-01

It is not well documented in Norway who possesses the competence and who is the user of forest material as bio fuel. Forest material is forest chips, secondary products from forestry, and firewood. The project reported was a literature study that throws light on the problem by referring to central persons and institutions in this field. The report also is a general introduction to bio energy based on forest material. The principle sections deal with (1) Climate policy, (2) Energy carriers based on forest material, (3) Systems for selection and treatment of bio fuel, (4) Methods for calculation of the supply of biomass in the forest, (5) Returning ash to the forest, (6) Transport, (7) Storage, (8) Assessment of bio energy, (9) Abstract of relevant Norwegian reports, (10) Bio energy projects and bio energy actors in Norway and (11) Proposed research projects and research work on forest material as fuel.

Design and manufacturing of bio-based sandwich structures

CSIR Research Space (South Africa)

John, Maya J

2017-03-01

Full Text Available The aim of this chapter is to discuss the design and manufacturing of bio-based sandwich structures. As the economic advantages of weight reduction have become mandatory for many advanced industries, bio-based sandwich panels have emerged...

Bio-fuels for the gas turbine: A review

International Nuclear Information System (INIS)

Gupta, K.K.; Rehman, A.; Sarviya, R.M.

2010-01-01

Due to depletion of fossil fuel, bio-fuels have generated a significant interest as an alternative fuel for the future. The use of bio-fuels to fuel gas turbine seems a viable solution for the problems of decreasing fossil-fuel reserves and environmental concerns. Bio-fuels are alternative fuels, made from renewable sources and having environmental benefit. In recent years, the desire for energy independence, foreseen depletion of nonrenewable fuel resources, fluctuating petroleum fuel costs, the necessity of stimulating agriculture based economy, and the reality of climate change have created an interest in the development of bio-fuels. The application of bio-fuels in automobiles and heating applications is increasing day by day. Therefore the use of these fuels in gas turbines would extend this application to aviation field. The impact of costly petroleum-based aviation fuel on the environment is harmful. So the development of alternative fuels in aviation is important and useful. The use of liquid and gaseous fuels from biomass will help to fulfill the Kyoto targets concerning global warming emissions. In addition, to reduce exhaust emission waste gases and syngas, etc., could be used as a potential gas turbine fuel. The term bio-fuel is referred to alternative fuel which is produced from biomass. Such fuels include bio-diesel, bio-ethanol, bio-methanol, pyrolysis oil, biogas, synthetic gas (dimethyl ether), hydrogen, etc. The bio-ethanol and bio-methanol are petrol additive/substitute. Bio-diesel is an environment friendly alternative liquid fuel for the diesel/aviation fuel. The gas turbine develops steady flame during its combustion; this feature gives a flexibility to use alternative fuels. Therefore so the use of different bio-fuels in gas turbine has been investigated by a good number of researchers. The suitability and modifications in the existing systems are also recommended. (author)

Recent Advances in the Sound Insulation Properties of Bio-based Materials

Directory of Open Access Journals (Sweden)

Xiaodong Zhu

2013-12-01

Full Text Available Many bio-based materials, which have lower environmental impact than traditional synthetic materials, show good sound absorbing and sound insulation performances. This review highlights progress in sound transmission properties of bio-based materials and provides a comprehensive account of various multiporous bio-based materials and multilayered structures used in sound absorption and insulation products. Furthermore, principal models of sound transmission are discussed in order to aid in an understanding of sound transmission properties of bio-based materials. In addition, the review presents discussions on the composite structure optimization and future research in using co-extruded wood plastic composite for sound insulation control. This review contributes to the body of knowledge on the sound transmission properties of bio-based materials, provides a better understanding of the models of some multiporous bio-based materials and multilayered structures, and contributes to the wider adoption of bio-based materials as sound absorbers.

A study of the LCA based biofuel supply chain multi-objective optimization model with multi-conversion paths in China

International Nuclear Information System (INIS)

Liu, Zhexuan; Qiu, Tong; Chen, Bingzhen

2014-01-01

Highlights: • A LCA based biofuel supply chain model considering 3E criteria was proposed. • The model was used to design a supply chain considering three conversion pathways. • An experimental biofuel supply chain for China was designed. • A Pareto-optimal solution surface of this multi-objective problem was obtained. • The designed supply chain was rather robust to price variation. - Abstract: In this paper we present a life cycle assessment (LCA) based biofuel supply chain model with multi-conversion pathways. This model was formulated as a mixed integer linear programming (MILP) problem which took economic, energy, and environmental criteria (3E) into consideration. The economic objective was measured by the total annual profit. The energy objective was measured by using the average fossil energy input per megajoule (MJ) of biofuel. The environmental objective was measured by greenhouse gas (GHG) emissions per MJ of biofuel. After carefully consideration of the current situation in China, we chose to examine three conversion pathways: bio-ethanol (BE), bio-methanol (BM) and bio-diesel (BD). LCA was integrated to a multi-objective supply chain model by dividing each pathway into several individual parts and analyzing each part. The multi-objective MILP problem was solved using a ε-constraint method by defining the total annual profit as the optimization objective and assigning the average fossil energy input per MJ biofuel and GHG emissions per MJ biofuel as constraints. This model was then used to design an experimental biofuel supply chain for China. A surface of the Pareto optimal solutions was obtained by linear interpolation of the non-inferior solutions. The optimal results included the choice of optimal conversion pathway, biomass type, biomass locations, facility locations, and network topology structure in the biofuel supply chain. Distributed and centralized systems were also factored into our experimental system design. In addition, the

Natural biotic resources in LCA: Towards an impact assessment model for sustainable supply chain management.

Science.gov (United States)

Crenna, Eleonora; Sozzo, Sara; Sala, Serenella

2018-01-20

Natural resources, biotic and abiotic, are fundamental from both the ecological and socio-economic point of view, being at the basis of life-support. However, since the demand for finite resources continues to increase, the sustainability of current production and consumption patterns is questioned both in developed and developing countries. A transition towards an economy based on biotic renewable resources (bio-economy) is considered necessary in order to support a steady provision of resources, representing an alternative to an economy based on fossil and abiotic resources. However, to ensure a sustainable use of biotic resources, there is the need of properly accounting for their use along supply chains as well as defining a robust and comprehensive impact assessment model. Since so far naturally occurring biotic resources have gained little attention in impact assessment methods, such as life cycle assessment, the aim of this study is to enable the inclusion of biotic resources in the assessment of products and supply chains. This paper puts forward a framework for biotic resources assessment, including: i) the definition of system boundaries between ecosphere and technosphere, namely between naturally occurring and man-made biotic resources; ii) a list of naturally occurring biotic resources which have a commercial value, as basis for building life cycle inventories (NOBR, e.g. wild animals, plants etc); iii) an impact pathway to identify potential impacts on both resource provision and ecosystem quality; iv) a renewability-based indicator (NOBRri) for the impact assessment of naturally occurring biotic resources, including a list of associated characterization factors. The study, building on a solid review of literature and of available statistical data, highlights and discusses the critical aspects and paradoxes related to biotic resource inclusion in LCA: from the system boundaries definition up to the resource characterization.

Underground economy modelling: simple models with complicated dynamics

OpenAIRE

Albu, Lucian-Liviu

2003-01-01

The paper aims to model the underground economy using two different models: one based on the labor supply method and a generalized model for the allocation of time. The model based on the labor supply method is conceived as a simulating one in order to determine some reasonable thresholds of the underground sector extension based only on the available macroeconomic statistical data. The generalized model for the allocation of time is a model based on direct approach which estimates the underg...

A comparative review of petroleum-based and bio-based acrolein production.

Science.gov (United States)

Liu, Lu; Ye, X Philip; Bozell, Joseph J

2012-07-01

Acrolein is an important chemical intermediate for many common industrial chemicals, leading to an array of useful end products. This paper reviews all the synthetic methods, including the former (aldol condensation) and contemporary (partial oxidation of propylene) manufacturing methods, the partial oxidation of propane, and most importantly, the bio-based glycerol-dehydration route. Emphasis is placed on the petroleum-based route from propylene and the bio-based route from glycerol, an abundantly available and relatively inexpensive raw material available from biodiesel production. This review provides technical details and incentives for industrial proyduction that justify a transition toward bio-based acrolein production. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility.

Science.gov (United States)

van den Oever, Martien; Molenveld, Karin

2017-07-25

Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio-based plastics were presented, together with economic considerations. The present paper discusses the mechanical and thermal properties of a range of commercially available bio-based plastics based on polylactic acid (PLA), cellulose esters, starch and polyamides, and the feasibility of replacing fossil-based counterparts based on performance. The evaluation is approached from an end user perspective. First, potentially suitable bio-based plastics are selected based on manufacturers' specifications in technical data sheets, then a first experimental evaluation is performed on injection moulded ISO specimens, and finally a further selection of plastics is tested on large 50×70cm panels. This technical feasibility study indicates that so far bio-based plastics do not completely match the properties of high performance materials like flame retardant V-0 PC/ABS blends used in electronic devices. The performance gap is being decreased by the development of stereocomplex PLA and hybrid PLA blends with polycarbonate, which offer clearly improved properties with respect to maximum usage temperature and toughness. In addition, several materials meet the V-0 flammability requirements needed in specific durable applications. On the other hand, improving these properties so far has negative consequences for the bio-based content. This study also shows that replacement of bulk polymers like PS is feasible using PLA compounds with a bio-based content as high as 85%. Copyright © 2016 Elsevier B.V. All rights reserved.

Determining the bio-based content of bio-plastics used in Thailand by radiocarbon analysis

Science.gov (United States)

Ploykrathok, T.; Chanyotha, S.

2017-06-01

Presently, there is an increased interest in the development of bio-plastic products from agricultural materials which are biodegradable in order to reduce the problem of waste disposal. Since the amount of modern carbon in bio-plastics can indicate how much the amount of agricultural materials are contained in the bio-plastic products, this research aims to determine the modern carbon in bio-plastic using the carbon dioxide absorption method. The radioactivity of carbon-14 contained in the sample is measured by liquid scintillation counter (Tri-carb 3110 TR, PerkinElmer). The percentages of bio-based content in the samples were determined by comparing the observed modern carbon content with the values contained in agricultural raw materials. The experimental results show that only poly(lactic acid) samples have the modern carbon content of 97.4%, which is close to the agricultural materials while other bio-plastics types are found to have less than 50% of the modern carbon content. In other words, most of these bio-plastic samples were mixed with other materials which are not agriculturally originated.

Determining the bio-based content of bio-plastics used in Thailand by radiocarbon analysis

International Nuclear Information System (INIS)

Ploykrathok, T; Chanyotha, S

2017-01-01

Presently, there is an increased interest in the development of bio-plastic products from agricultural materials which are biodegradable in order to reduce the problem of waste disposal. Since the amount of modern carbon in bio-plastics can indicate how much the amount of agricultural materials are contained in the bio-plastic products, this research aims to determine the modern carbon in bio-plastic using the carbon dioxide absorption method. The radioactivity of carbon-14 contained in the sample is measured by liquid scintillation counter (Tri-carb 3110 TR, PerkinElmer). The percentages of bio-based content in the samples were determined by comparing the observed modern carbon content with the values contained in agricultural raw materials. The experimental results show that only poly(lactic acid) samples have the modern carbon content of 97.4%, which is close to the agricultural materials while other bio-plastics types are found to have less than 50% of the modern carbon content. In other words, most of these bio-plastic samples were mixed with other materials which are not agriculturally originated. (paper)

[Reflection on developing bio-energy industry of large oil company].

Science.gov (United States)

Sun, Haiyang; Su, Haijia; Tan, Tianwei; Liu, Shumin; Wang, Hui

2013-03-01

China's energy supply becomes more serious nowadays and the development of bio-energy becomes a major trend. Large oil companies have superb technology, rich experience and outstanding talent, as well as better sales channels for energy products, which can make full use of their own advantages to achieve the efficient complementary of exist energy and bio-energy. Therefore, large oil companies have the advantages of developing bio-energy. Bio-energy development in China is in the initial stage. There exist some problems such as available land, raw material supply, conversion technologies and policy guarantee, which restrict bio-energy from industrialized development. According to the above key issues, this article proposes suggestions and methods, such as planting energy plant in the marginal barren land to guarantee the supply of bio-energy raw materials, cultivation of professional personnel, building market for bio-energy counting on large oil companies' rich experience and market resources about oil industry, etc, aimed to speed up the industrialized process of bio-energy development in China.

Supply regimes in fisheries

DEFF Research Database (Denmark)

Nielsen, Max

2006-01-01

Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extremes......, the traditional understanding of supply regimes in fisheries needs modification. This paper identifies through a case study of the East Baltic cod fishery supply regimes in fisheries, taking alternative fisheries management schemes and mesh size limitations into account. An age-structured Beverton-Holt based bio......-economic supply model with mesh sizes is developed. It is found that in the presence of realistic management schemes, the supply curves are close to vertical in the relevant range. Also, the supply curve under open access with mesh size limitations is almost vertical in the relevant range, owing to constant...

Development of bio-hybrid material based on Salmonella ...

African Journals Online (AJOL)

The immobilization of a whole microbial cell is an important process used in nanotechnology of biosensors and other related fields, especially the development of bio-hybrid materials based on live organisms and inorganic compounds. Here, we described an essay to develop a bio-hybrid material based on Salmonella ...

Report on the behalf of the Parliamentary Office for the assessment of scientific and technological choices on: from biomass to bio-economy: a strategy for France. Problematic and conclusions of the public hearing of the 25 June 2015. National Assembly Nr 3489, Senate Nr 380

International Nuclear Information System (INIS)

Le Deaut, Jean-Yves; Courteau, Roland; Sido, Bruno Senat

2016-01-01

This report first gives an overview of the different uses of biomass. It notably outlines the role of biomass in energy transition. It notices that this sector is facing always better identified challenges despite a lack of public strategy during the past years. Now, a new public policy is to be carried out within the framework of a true strategy of bio-economy. This part is concluded by the examination by the Office of a feasibility study. The second part reports the content of a public hearing, 'The strategy for biomass in France: a step towards bio-economy', which was held in June 2015. It comprised two round tables. The first one addressed processes, a situational analysis, and perspectives. The second one addressed the relationship between the biomass strategy and the bio-economy strategy

CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT

International Nuclear Information System (INIS)

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-01-01

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates have been completed and issued for review. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed during the fourth quarter. After some unavoidable delays, a suitable representative supply of municipal solid waste (MSW) feed material was procured. During this quarter (first quarter of 2001), shredding of the feed material was completed and final feed conditioning was completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing. Pilot facility modifications continued to improve facility operations and performance during the first quarter of 2001. Samples of the co-fire fuel material were sent to the co-fire facility for evaluation. The TVA-Colbert facility has neared completion of the task to evaluate the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for steam supply system is being developed

Optimisation of a green gas supply chain : a review

NARCIS (Netherlands)

Bekkering, Jan; Broekhuis, A. A.; van Gemert, Wim

In this review the knowledge status of and future research options on a green gas supply based on biogas production by co-digestion is explored. Applications and developments of the (bio)gas supply in The Netherlands have been considered, whereafter literature research has been done into the several

Optimisation of a green gas supply chain - A review

NARCIS (Netherlands)

Bekkering, J.; Broekhuis, A. A.; van Gernert, W. J. T.; van Gemert, W. J. T.

In this review the Knowledge status of and future research options on a green gas supply based on biogas production by co-digestion is explored. Applications and developments of the (bio)gas supply in The Netherlands have been considered, whereafter literature research has been done into the several

Energy, economy and exergy evaluations of the solutions for supplying domestic hot water from low-temperature district heating in Denmark

International Nuclear Information System (INIS)

Yang, Xiaochen; Li, Hongwei; Svendsen, Svend

2016-01-01

Highlights: • Provided domestic hot water configurations for low-temperature district heating. • Various building typologies and district heating supply temperatures were included. • Different scenarios were evaluated from the energy, economy and exergy aspects. • The benefits of lower return temperature to district heating were investigated. - Abstract: District heating in Denmark is going through the transition from 3rd generation (80/40 °C) to 4th generation (50–55 °C/25 °C) systems in preparation for district heating based completely on renewable fuels by 2035. However, concern about Legionella growth and reduced comfort with low-temperature domestic hot water supply may be discouraging the implementation of low-temperature district heating. Aimed at providing possible solutions, this study modelled various proposals for district heating systems with supply temperatures of 65 °C, 50 °C and 35 °C and for two different building topologies. Evaluation models were built to investigate the energy, economy and exergy performances of the proposed domestic hot water systems in various configurations. The configurations of the devised domestic hot water substations were optimised to fit well with both low and ultra-low-temperature district heating and to reduce the return temperature to district heating. The benefits of lower return temperatures were also analysed compared with the current district heating situation. The evaluation results show that the decentralized substation system with instantaneous heat exchanger unit performed better under the 65 °C and 50 °C district heating scenarios, while the individual micro tank solution consumed less energy and cost less in the 35 °C district heating scenario.

Malaysia Transitions toward a Knowledge-Based Economy

Science.gov (United States)

Mustapha, Ramlee; Abdullah, Abu

2004-01-01

The emergence of a knowledge-based economy (k-economy) has spawned a "new" notion of workplace literacy, changing the relationship between employers and employees. The traditional covenant where employees expect a stable or lifelong employment will no longer apply. The retention of employees will most probably be based on their skills…

Energy, economy and exergy evaluations of the solutions for supplying domestic hot water from low-temperature district heating in Denmark

DEFF Research Database (Denmark)

Yang, Xiaochen; Li, Hongwei; Svendsen, Svend

2016-01-01

District heating in Denmark is going through the transition from 3rd generation (80/40 °C) to 4th generation (50-55 °C/25 °C) systems in,preparation for district heating based completely on renewable fuels by 2035. However, concern about Legionella growth and reduced comfort with low......-temperature domestic hot water supply may be discouraging the implementation of low-temperature district heating. Aimed at providing possible solutions, this study modelled various proposals for district heating systems with supply temperatures of 65 °C, 50 °C and 35 °C and for two different building topologies....... Evaluation models were built to investigate the energy, economy and exergy performances of the proposed domestic hot water systems in various configurations. The configurations of the devised domestic hot water substations were optimised to fit well with both low and ultra-low-temperature district heating...

Can bio-based attributes upgrade a brand? How partial and full use of bio-based materials affects the purchase intention of brands

NARCIS (Netherlands)

Reinders, Machiel J.; Onwezen, Marleen C.; Meeusen, Marieke J.G.

2017-01-01

To reduce human dependency on fossil fuels, increasing attempts are being made to substitute synthetic materials in products with bio-based materials. Global brands attempt to differentiate themselves by adding bio-based materials to their products. However, little is known about consumers'

Processing and characterization of bio-based composites

Science.gov (United States)

Lu, Hong

Much research has focused on bio-based composites as a potential material to replace petroleum-based plastics. Considering the high price of Polyhydroxyalkanoates (PHAs), PHA/ Distiller's Dried Grains with Solubles (DDGS) composite is a promising economical and high-performance biodegradable material. In this paper, we discuss the effect of DDGS on PHA composites in balancing cost with material performance. Poly (lactic acid) PLA/DDGS composite is another excellent biodegradable composite, although as a bio-based polymer its degradation time is relatively long. The goal of this research is therefore to accelerate the degradation process for this material. Both bio-based composites were extruded through a twin-screw microcompounder, and the two materials were uniformly mixed. The morphology of the samples was examined using a Scanning Electron Microscope (SEM); thermal stability was determined with a Thermal Gravimetric Analyzer (TGA); other thermal properties were studied using Differential Scanning Calorimetry (DSC) and a Dynamic Mechanical Analyzer (DMA). Viscoelastic properties were also evaluated using a Rheometer.

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

Energy Technology Data Exchange (ETDEWEB)

Dunn, Jennifer B. [Systems; Biddy, Mary [National; Jones, Susanne [Energy; Cai, Hao [Systems; Benavides, Pahola Thathiana [Systems; Markham, Jennifer [National; Tao, Ling [National; Tan, Eric [National; Kinchin, Christopher [National; Davis, Ryan [National; Dutta, Abhijit [National; Bearden, Mark [Energy; Clayton, Christopher [Energy; Phillips, Steven [Energy; Rappé, Kenneth [Energy; Lamers, Patrick [Bioenergy

2017-10-30

24 biomass-derived compounds and mixtures, identified based on their physical properties, that could be blended into fuels to improve spark ignition engine fuel economy were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall, bio-blendstock yields in biochemical processes were lower than in thermochemical processes, in which all biomass, including lignin, is converted to a product. Bio-blendstock yields were a key determinant in overall viability. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock as compared to a chemical. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blendability of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Overall, the technology to produce many of these blendstocks from biomass is emerging and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors in addition to physical properties of blendstocks that could be used to boost fuel economy can help spotlight those most likely to be viable in the near term.

2nd generation biogas. BioSNG

International Nuclear Information System (INIS)

Zwart, R.W.R.

2008-11-01

The substitution of natural gas by a renewable equivalent is an interesting option to reduce the use of fossil fuels and the accompanying greenhouse gas emissions, as well as from the point of view of security of supply. The renewable alternative for natural gas is green natural gas, i.e. gaseous energy carriers produced from biomass comprising both biogas and Synthetic Natural Gas (SNG). Via this route can be benefited from all the advantages of natural gas, like the existing dense infrastructure, trade and supply network, and natural gas applications. In this presentation attention is paid to the differences between first generation biogas and second generation bioSNG; the market for bioSNG: grid injection vs. transportation fuel; latest update on the lab- and pilot-scale bioSNG development at ECN; and an overview is given of ongoing bioSNG activities worldwide

Urban Wood-Based Bio-Energy Systems in Seattle

Energy Technology Data Exchange (ETDEWEB)

Stan Gent, Seattle Steam Company

2010-10-25

Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Resource recovery from bio-based production processes: a future necessity?

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; S.B.A. Udugama, Isuru; Cignitti, Stefano

2017-01-01

The promise of transforming waste streams with small economic value into valuable products makes resource recovery technologies in bio-based production processes an attractive proposition. However, the use of resource recovery technologies in industrial applications is still minimal, despite its...... technologies to industrial bio-based production processes. The role and importance of economics, technology readiness and socio-environmental impacts of resource recovery in successfully implementing resource recovery technologies in industrial bio-based production processes is also discussed. Finally, based...... wide use in closely related processes such as dairy production. In this paper, a perspective on the role of resource recovery in bio-based production processes is provided through reviewing the past practice and identifying the benefits, opportunities and challenges of introducing resource recovery...

The foundation of a bio based economy. Essay prepared for the National Science Foundation

International Nuclear Information System (INIS)

Faaij, A.

2008-05-01

This essay addresses the potential and problems of the large-scale use of biomass as an energy source and as a renewable precursor for various materials. The global context of the current bio fuel debate is discussed, as are the major incentives for furthering the development of biomass as an option. The most recent insights into the potential of biomass in relation to world food supply, water, biodiversity and energy demand are dealt with. The essay goes on to examine the crucial role of agriculture and the interlink age of the sustainable development of biomass with the modernization of agriculture. Consideration is also given to the need to guarantee sustainable biomass production and land use, and to construct a working international biomass market (including recent developments in this area), followed by strategic recommendations. It is proposed that, throughout the course of this century, biomass will play a major part in delivering sustainable energy (and materials), reducing greenhouse gas emissions and providing a major economic boost to the world's rural regions. It will enable us to avoid conflicts associated with water use and the protection of biodiversity. If this is to be achieved, however, numerous (sustainable) preconditions must be met, and appropriate biomass options must be developed (specifically with regard to multiannual crops). These measures will have to be combined with substantial investments in improvements to existing agricultural practices and animal husbandry, especially in developing countries. This is a complex message and a challenge for policymakers and for the stakeholders involved. At the same time, however, it is vitally important to achieve results in the areas of reducing greenhouse gas emissions, developing alternatives to fossil fuels (especially oil), combating poverty, and boosting rural development, modernizing agriculture, and improving soil management. Biomass is at the crossroads of all these problems. If tackled

A methodology to assess the contribution of biorefineries to a sustainable bio-based economy

International Nuclear Information System (INIS)

Maga, Daniel

2015-01-01

Within this thesis for the first time an integrative methodology to assess the sustainability of biorefineries and bio-based products has been developed which is based on a fundamental understanding of sustainability as presented in the Brundtland report. The applied integrative concept of sustainability as developed by the Institute for Technology Assessment and Systems Analysis (ITAS) overcomes the widespread thinking in three pillars of sustainability and opens up new perspectives. The methodology developed addresses innovative life cycle assessment evaluation methods on midpoint level as well as on the area of protection and adopts state-of-the-art assessment procedures e.g. to determine water deprivation. It goes far beyond the scope of conventional LCA studies and examines effects on human health, on the environment, on the development of knowledge and physical capital, and on regional development and acceptance. In order to validate the developed method it was applied to an algae biorefinery currently under development and construction in the south of Spain. For this assessment for the first time extensive process data was collected of a real algae biorefinery which uses municipal waste water as a culture medium for microalgae. The use of waste water allows to reduce the demand for fresh water and avoids additional fertilisation of microalgae. Moreover, the analysed algae biorefinery replaces conventional waste water treatment by a biological purification and produces biogas by an anaerobic pretreatment of waste water as well as by anaerobic digestion of algae. After several purification steps the biogas can be used as automotive fuel and thus contributes to further development and increased use of biofuels. On the one hand the sustainability assessment shows that this way of waste water treatment contributes to climate protection and to the conservation of fossil energy carrier. On the other hand approximately ten times more land is needed and twenty times

A methodology to assess the contribution of biorefineries to a sustainable bio-based economy

Energy Technology Data Exchange (ETDEWEB)

Maga, Daniel

2015-07-01

Within this thesis for the first time an integrative methodology to assess the sustainability of biorefineries and bio-based products has been developed which is based on a fundamental understanding of sustainability as presented in the Brundtland report. The applied integrative concept of sustainability as developed by the Institute for Technology Assessment and Systems Analysis (ITAS) overcomes the widespread thinking in three pillars of sustainability and opens up new perspectives. The methodology developed addresses innovative life cycle assessment evaluation methods on midpoint level as well as on the area of protection and adopts state-of-the-art assessment procedures e.g. to determine water deprivation. It goes far beyond the scope of conventional LCA studies and examines effects on human health, on the environment, on the development of knowledge and physical capital, and on regional development and acceptance. In order to validate the developed method it was applied to an algae biorefinery currently under development and construction in the south of Spain. For this assessment for the first time extensive process data was collected of a real algae biorefinery which uses municipal waste water as a culture medium for microalgae. The use of waste water allows to reduce the demand for fresh water and avoids additional fertilisation of microalgae. Moreover, the analysed algae biorefinery replaces conventional waste water treatment by a biological purification and produces biogas by an anaerobic pretreatment of waste water as well as by anaerobic digestion of algae. After several purification steps the biogas can be used as automotive fuel and thus contributes to further development and increased use of biofuels. On the one hand the sustainability assessment shows that this way of waste water treatment contributes to climate protection and to the conservation of fossil energy carrier. On the other hand approximately ten times more land is needed and twenty times

Bio-Based Coatings for Paper Applications

Directory of Open Access Journals (Sweden)

Vibhore Kumar Rastogi

2015-11-01

Full Text Available The barrier resistance and wettability of papers are commonly controlled by the application of petroleum-based derivatives such as polyethylene, waxes and/or fluor- derivatives as coating. While surface hydrophobicity is improved by employing these polymers, they have become disfavored due to limitations in fossil-oil resources, poor recyclability, and environmental concerns on generated waste with lack of biodegradation. Alternatively, biopolymers including polysaccharides, proteins, lipids and polyesters can be used to formulate new pathways for fully bio-based paper coatings. However, difficulties in processing of most biopolymers may arise due to hydrophilicity, crystallization behavior, brittleness or melt instabilities that hinder a full exploitation at industrial scale. Therefore, blending with other biopolymers, plasticizers and compatibilizers is advantageous to improve the coating performance. In this paper, an overview of barrier properties and processing of bio-based polymers and their composites as paper coating will be discussed. In particular, recent technical advances in nanotechnological routes for bio-based nano- composite coatings will be summarized, including the use of biopolymer nanoparticles, or nanofillers such as nanoclay and nanocellulose. The combination of biopolymers along with surface modification of nanofillers can be used to create hierarchical structures that enhance hydrophobicity, complete barrier protection and functionalities of coated papers.

Bio-based Polymer Foam from Soyoil

Science.gov (United States)

Bonnaillie, Laetitia M.; Wool, Richard P.

2006-03-01

The growing bio-based polymeric foam industry is presently lead by plant oil-based polyols for polyurethanes and starch foams. We developed a new resilient, thermosetting foam system with a bio-based content higher than 80%. The acrylated epoxidized soybean oil and its fatty acid monomers is foamed with pressurized carbon dioxide and cured with free-radical initiators. The foam structure and pore dynamics are highly dependent on the temperature, viscosity and extent of reaction. Low-temperature cure hinds the destructive pore coalescence and the application of a controlled vacuum results in foams with lower densities ˜ 0.1 g/cc, but larger cells. We analyze the physics of foam formation and stability, as well as the structure and mechanical properties of the cured foam using rigidity percolation theory. The parameters studied include temperature, vacuum applied, and cross-link density. Additives bring additional improvements: nucleating agents and surfactants help produce foams with a high concentration of small cells and low bulk density. Hard and soft thermosetting foams with a bio content superior to 80% are successfully produced and tested. Potential applications include foam-core composites for hurricane-resistant housing, structural reinforcement for windmill blades, and tissue scaffolds.

Bio-economic modeling of water quality improvements using a dynamic applied general equilibrium approach

NARCIS (Netherlands)

Dellink, R.; Brouwer, R.; Linderhof, V.G.M.; Stone, K.

2011-01-01

An integrated bio-economic model is developed to assess the impacts of pollution reduction policies on water quality and the economy. Emission levels of economic activities to water are determined based on existing environmental accounts. These emission levels are built into a dynamic economic model

Linear Economy Versus Circular Economy: A Comparative and Analyzer Study for Optimization of Economy for Sustainability

Directory of Open Access Journals (Sweden)

Sariatli Furkan

2017-05-01

Full Text Available Upon visiting the existing literature on the subject of linear vs. circular economy, this paper finds that, the blueprint of the current economy is hardly sustainable by using the comparative benchmarking method that drained from literature. The intrinsic mechanics of the linear economy, by relying on the wasteful take - make - dispose flow, is detrimental to the environment, cannot supply the growing populace of our planet with essential services and it naturally leads to strained profitability. Elements of a plausible solution to the challenges have been around for decades, although they have only recently been compiled in to the conceptual framework of circular economy. The core ideas of Circular Economy are elimination of waste by design, respect for the social, economic and natural environment and resource-conscious business conduct. Built on the backbone of these principles, the circular economy has demonstrated to deliver tangible benefits and viability to address the economic, environmental and social challenges of our days.

SYNTHESIS AND CHARACTERIZATION OF BIO-BASED POLYESTER POLYOL

Directory of Open Access Journals (Sweden)

MİTHAT ÇELEBİ

2016-11-01

Full Text Available Polyurethanes are versatile polymeric materials and are usually synthesised by isocyanate reactions with polyols. Due to the variety of isocyanates and polyols, particularly polyols, polyurethanes can be easily tailored for wide applications, such as rigid and flexible foams, coatings, adhesives, and elastomers. Considerable efforts have been recently devoted to developing bio-based substitutes for petroleum-based polyuretahanes due to increasing concerns over the depletion of petroleum resources, environment, and sustainability. Polyester polyols based on aliphatic and aromatic dicarboxylic acids are one of the most important materials in polymer technologies. Large volume of plants oils are used as renewable resources to produce various chemicals which are industrially important to make soaps, cosmetic products, surfactants, lubricants, diluents, plasticizers, inks, agrochemicals, composite materials, food industry. This study introduces synthesis and properties of bio-based polyols from different renewable feedstocks including vegetable oils and derivatives. A comparison of bio-based polyol properties with their petroleum-based analogues were investigated.

Opportunity and development of bio-based composites

Science.gov (United States)

Zhiyong Cai; Jerrold E. Winandy

2005-01-01

Our forests are a naturally renewable resource that has been used as a principal source of bio-energy and building materials for centuries. The rapid growth of world population has now resulted in substantial increases in demand and in consumption of all raw materials. This now provides a unique opportunity of developing new bio-based composites. The 100-year history...

Circular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals

Directory of Open Access Journals (Sweden)

Damien Giurco

2014-05-01

Full Text Available The concept of the circular economy proposes new patterns of production, consumption and use, based on circular flows of resources. Under a scenario where there is a global shift towards the circular economy, this paper discusses the advent of two parallel and yet-to-be-connected trends for Australia, namely: (i responsible minerals supply chains and (ii additive manufacturing, also known as 3D production systems. Acknowledging the current context for waste management, the paper explores future interlinked questions which arise in the circular economy for responsible supply chains, additive manufacturing, and metals recycling. For example, where do mined and recycled resources fit in responsible supply chains as inputs to responsible production? What is required to ensure 3D production systems are resource efficient? How could more distributed models of production, enabled by additive manufacturing, change the geographical scale at which it is economic or desirable to close the loop? Examples are given to highlight the need for an integrated research agenda to address these questions and to foster Australian opportunities in the circular economy.

Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

OpenAIRE

Patalinghug, Epictetus E.

2015-01-01

Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

Transition to knowledge-based economy in Saudi Arabia

NARCIS (Netherlands)

Nour, S.

2014-01-01

This paper discusses the progress in transition to knowledge-based economy in Saudi Arabia. As for the methodology, this paper uses updated secondary data obtained from different sources. It uses both descriptive and comparative approaches and uses the OECD definition of knowledge-based economy and

Leaf habit and woodiness regulate different leaf economy traits at a given nutrient supply.

Science.gov (United States)

Ordoñez, Jenny C; van Bodegom, Peter M; Witte, Jan-Philip M; Bartholomeus, Ruud P; van Dobben, Han F; Aerts, Rien

2010-11-01

The large variation in the relationships between environmental factors and plant traits observed in natural communities exemplifies the alternative solutions that plants have developed in response to the same environmental limitations. Qualitative attributes, such as growth form, woodiness, and leaf habit can be used to approximate these alternative solutions. Here, we quantified the extent to which these attributes affect leaf trait values at a given resource supply level, using measured plant traits from 105 different species (254 observations) distributed across 50 sites in mesic to wet plant communities in The Netherlands. For each site, soil total N, soil total P, and water supply estimates were obtained by field measurements and modeling. Effects of growth forms, woodiness, and leaf habit on relations between leaf traits (SLA, specific leaf area; LNC, leaf nitrogen concentration; and LPC, leaf phosphorus concentration) vs. nutrient and water supply were quantified using maximum-likelihood methods and Bonferroni post hoc tests. The qualitative attributes explained 8-23% of the variance within sites in leaf traits vs. soil fertility relationships, and therefore they can potentially be used to make better predictions of global patterns of leaf traits in relation to nutrient supply. However, at a given soil fertility, the strength of the effect of each qualitative attribute was not the same for all leaf traits. These differences may imply a differential regulation of the leaf economy traits at a given nutrient supply, in which SLA and LPC seem to be regulated in accordance to changes in plant size and architecture while LNC seems to be primarily regulated at the leaf level by factors related to leaf longevity.

Environmental implications of decarbonising electricity supply in large economies: The case of Mexico

International Nuclear Information System (INIS)

Santoyo-Castelazo, Edgar; Stamford, Laurence; Azapagic, Adisa

2014-01-01

Highlights: • Life cycle impacts of decarbonising electricity supply in Mexico estimated. • Eleven scenarios considered to 2050 with different technologies and GHG targets. • Continuing with business as usual would double current life cycle GHG emissions. • Life cycle impacts can be reduced by 80% with increased renewables, nuclear and CCS. • Demand reduction important but on its own cannot help achieve Mexican GHG targets. - Abstract: Driven by the security of supply and climate change concerns, decarbonisation of energy supply has become a priority for many countries. This study focuses on Mexico, the world’s 14th largest economy, and considers the environmental implications of decarbonising its electricity supply. Eleven scenarios are considered for the year 2050 with different technology mixes and GHG reduction targets, ranging from stabilisation at the year 2000 level to a reduction of 60–85%. Unlike most energy scenario analyses which focus mainly on direct CO 2 or GHG emissions, this paper presents the full life cycle impacts of electricity generation in 2050 considering ten environmental impacts which, in addition to global warming, include resource and ozone layer depletion, acidification, eutrophication, summer smog, human and eco-toxicity. The results indicate that continuing with business as usual (BAU) would double the current life cycle GHG emissions, even if annual electricity demand growth was reduced to 2.25% from the current 2.8%. Switching from the current fossil fuel mix to a higher contribution of renewables (55–86%) and nuclear power (up to 30%) would lead to a significant reduction of all ten life cycle impacts compared to the current situation and up to an 80% reduction compared to BAU

Estimation of real GDP and unrecorded economy in Turkey based on environmental data

International Nuclear Information System (INIS)

Karanfil, Fatih; Ozkaya, Ata

2007-01-01

This paper estimates the real gross domestic product (GDP) and unrecorded economy for Turkey using the Kalman filter technique. Using different tests, most of the research articles on energy policy investigate the causal relationship between energy consumption and GDP for different countries. On the other hand, other studies on climate change try to show the effects of both energy consumption and GDP on carbon dioxide (CO 2 ) emission. Since the unreported economy has an important weight in developing countries where the recorded (or official) GDP suffers from considerable measurement problems, investigation of the relationship between the recorded GDP and energy consumption may lead to biased results. In this paper, the economic variables (GDP, country population) as well as environmental variables (CO 2 emission, forest area) are used in order to estimate GDP, which is an unobserved variable in our model. The results clearly indicate that: first, the true GDP in Turkey, that our model estimates, is higher than the observed (recorded) GDP in the whole period of observation (1973-2003) and the size of unrecorded economy varies between 12 and 30 percent of the observed GDP; second, the gap between the true GDP and the observed GDP has an increasing trend; third, if the change in GDP per primary energy supply is smaller than the change in CO 2 per primary energy supply, then there may exist unrecorded economy

Introducing Opportunity-based Entrepreneurship in a Transition Economy

DEFF Research Database (Denmark)

Perunovic, Zoran

2005-01-01

This paper confronts necessity-based and opportunity-based entrepreneurial concepts in the transition of developing economies. The author constructs a research model and conducts field research (using Serbia as a case study) to explore how different personal and regional characteristics can favour......-up strategy for transition and developing economies....

Bio-Based Polyurethane Containing Isosorbide for Use in Composites and Coatings

Science.gov (United States)

2015-04-01

ARL-TR-7259 ● APR 2015 US Army Research Laboratory Bio-Based Polyurethane Containing Isosorbide for Use in Composites and...copyright notation hereon. ARL-TR-7259 ● APR 2015 US Army Research Laboratory Bio-Based Polyurethane Containing Isosorbide for Use...4. TITLE AND SUBTITLE Bio-Based Polyurethane Containing Isosorbide for Use in Composites and Coatings 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

Preliminary study of low carbon power demand and supply toward 2030

International Nuclear Information System (INIS)

Ogimoto, Kazuhiko; Ikeda, Yuichi; Kataoka, Kazuto; Ikegami, Takashi; Akai, Makoto

2012-01-01

It takes tens of years to realize the sustainable economy through reformation of energy infrastructure. The share of the electric power in the total energy increases, as the energy efficiency technologies of buildings and transportation and renewable energy technologies are of power technologies. Under these circumstances, it is necessary to deploy the long-term power demand-supply analysis and the long-term power system augmentation analysis so that the augmentation should be optimized and robust under various uncertainties so as to fulfill the criteria of security, economy and environmental. This paper, utilizing a long-range power system demand and supply model, ESPRIT, evaluates several scenarios with several options of nuclear. RE deployment, and thermal generation reinforcement based on the indicators such as self-sufficiency, economy, and environment to pursue the best demand-supply mix. (author)

Bio-Based Adhesives and Evaluation for Wood Composites Application

Directory of Open Access Journals (Sweden)

Fatemeh Ferdosian

2017-02-01

Full Text Available There has been a rapid growth in research and innovation of bio-based adhesives in the engineered wood product industry. This article reviews the recent research published over the last few decades on the synthesis of bio-adhesives derived from such renewable resources as lignin, starch, and plant proteins. The chemical structure of these biopolymers is described and discussed to highlight the active functional groups that are used in the synthesis of bio-adhesives. The potentials and drawbacks of each biomass are then discussed in detail; some methods have been suggested to modify their chemical structures and to improve their properties including water resistance and bonding strength for their ultimate application as wood adhesives. Moreover, this article includes discussion of techniques commonly used for evaluating the petroleum-based wood adhesives in terms of mechanical properties and penetration behavior, which are expected to be more widely applied to bio-based wood adhesives to better evaluate their prospect for wood composites application.

Pattern of Foreign Direct Investment in Developing Economies

DEFF Research Database (Denmark)

Patibandla, Murali

2004-01-01

Qualitative information and data show significant differences in the magnitude and type of foreigndirect investment inflows among developing economies. Explanation of the differences requiresanalysis of market institutional factors as well as the supply and demand side conditions. This paperadopts...... the approach that different configurations of supply, demand and market institutional factorsexplain the type of investment flows into developing economies. The argument is illustrated througha comparative study of China and India.Key Words: Developing Economies; Foreign Direct Investment; China, and India...

Biofuels sources, biofuel policy, biofuel economy and global biofuel projections

International Nuclear Information System (INIS)

Demirbas, Ayhan

2008-01-01

The term biofuel is referred to liquid, gas and solid fuels predominantly produced from biomass. Biofuels include energy security reasons, environmental concerns, foreign exchange savings, and socioeconomic issues related to the rural sector. Biofuels include bioethanol, biomethanol, vegetable oils, biodiesel, biogas, bio-synthetic gas (bio-syngas), bio-oil, bio-char, Fischer-Tropsch liquids, and biohydrogen. Most traditional biofuels, such as ethanol from corn, wheat, or sugar beets, and biodiesel from oil seeds, are produced from classic agricultural food crops that require high-quality agricultural land for growth. Bioethanol is a petrol additive/substitute. Biomethanol can be produced from biomass using bio-syngas obtained from steam reforming process of biomass. Biomethanol is considerably easier to recover than the bioethanol from biomass. Ethanol forms an azeotrope with water so it is expensive to purify the ethanol during recovery. Methanol recycles easier because it does not form an azeotrope. Biodiesel is an environmentally friendly alternative liquid fuel that can be used in any diesel engine without modification. There has been renewed interest in the use of vegetable oils for making biodiesel due to its less polluting and renewable nature as against the conventional petroleum diesel fuel. Due to its environmental merits, the share of biofuel in the automotive fuel market will grow fast in the next decade. There are several reasons for biofuels to be considered as relevant technologies by both developing and industrialized countries. Biofuels include energy security reasons, environmental concerns, foreign exchange savings, and socioeconomic issues related to the rural sector. The biofuel economy will grow rapidly during the 21st century. Its economy development is based on agricultural production and most people live in the rural areas. In the most biomass-intensive scenario, modernized biomass energy contributes by 2050 about one half of total energy

Bio energy in Norway

International Nuclear Information System (INIS)

Hamnaberg, Haavard; Sidelnikova, Maria

2011-01-01

The main conclusion in this report is that it is possible to make available about 14 TWh bio energy in Norway than what is used today to a charge that is located less than ca. 30 oere / kWh. Almost all this potential come from the forest and requires an increase in output up to the net sustained yield. Further 5 TWh may be available in the form of biogas at a cost that is both higher and have greater uncertainty than the fixed bio energy. It is set up a cost curve based on this work, which is quoted here. This reflects only the technical costs, and does not regard wages, commissions, taxes or fees. The value of alternative uses of biomass are not considered. The cost curve must therefore not be mixed with a supply curve. (eb)

Analyzing the Dynamics of the Bio-methane Production Chain and the Effectiveness of Subsidization Schemes under Uncertainty

NARCIS (Netherlands)

Eker, S.; Van Daalen, C.

2014-01-01

Bio-methane is a renewable gas option that can be injected to the natural gas grids to increase the sustainability of the energy system and to deal with natural gas supply problems. However, being based on several factors such as resource availability, competition between bio-methane and electricity

Predictive Methods for Dense Polymer Networks: Combating Bias with Bio-Based Structures

Science.gov (United States)

2016-03-16

Combating bias with bio - based structures 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Andrew J. Guenthner...unlimited. PA Clearance 16152 Integrity  Service  Excellence Predictive methods for dense polymer networks: Combating bias with bio -based...Architectural Bias • Comparison of Petroleum-Based and Bio -Based Chemical Architectures • Continuing Research on Structure-Property Relationships using

Bio-methanol potential in Indonesia: Forest biomass as a source of bio-energy that reduces carbon emissions

Energy Technology Data Exchange (ETDEWEB)

Suntana, Asep S. [Forest Systems and Bio-Energy Program, College of Forest Resources, University of Washington, Box 352100, Seattle, WA 98195-2100 (United States); Indonesian Ecolabeling Institute/Lembaga Ekolabel Indonesia (LEI), Taman Bogor Baru Blok BIV No. 12, Bogor 16152 (Indonesia); Vogt, Kristiina A. [Forest Systems and Bio-Energy Program, College of Forest Resources, University of Washington, Box 352100, Seattle, WA 98195-2100 (United States); Interforest LLC, Holderness, NH 03245 (United States); Renewol LLC, 63260 Overtree Road, Bend, OR 97701 (United States); Turnblom, Eric C. [Forest Biometrics Program, College of Forest Resources, University of Washington, Box 352100, WA 98195-2100 (United States); Upadhye, Ravi [ARU Associates, Pleasanton, CA 94566 (United States)

2009-11-15

Since Indonesia has significant land area in different forest types that could be used to produce biofuels, the potential to sustainably collect and convert forest materials to methanol for use in energy production was examined. Using the annually available aboveground forest biomass, from 40 to 168 billion l of bio-methanol could be produced for use as a transportation fuel and/or to supply fuel cells to produce electricity. When a lower forest biomass availability estimate was used to determine how much electricity (methanol fed into fuel cells) could be produced in Indonesia, more than 10 million households or about 12,000 villages (20% of the total rural villages in Indonesia) would be supplied annually with electricity. Collecting forest biomass at the higher end of the estimated available biomass and converting it to methanol to supply fuel cells could provide electricity to more than 42 million households annually. This would be approximately 52,000 villages, or 86% of the total rural villages in Indonesian. When electricity is produced with bio-methanol/fuel cells, it could potentially supply from half to all of the current electricity consumed in Indonesia. By generating electricity using bio-methanol/fuel cells instead of from fossil fuels, from 9 to 38% of the total carbon currently emitted each year in Indonesia could be avoided. In contrast, substituting this same amount of bio-methanol for gasoline could provide all of the annual gasoline needs of Indonesia and contribute towards reducing their carbon emissions by about 8-35%. (author)

Multi-scale Exploration of the Technical, Economic, and Environmental Dimensions of Bio-based Chemical Production

DEFF Research Database (Denmark)

Zhuang, Kai; Herrgard, Markus

2014-01-01

of a variety of policies and practices (e.g. land-usage, energy source mixture, CO2 emission cap), as well as trade offs between different objectives (e.g. profits for different sectors, emission minimization) for key stakeholders involved in the biochemical value chain (agriculture, energy, and biotechnology......In recent years, bio-based chemicals have gained traction as a sustainable alternative topetrochemicals. In order to maximize the impacts of researches and investments, there is a need to focus on the most promising combinations of feedstocks, biochemical products, and bioprocesses. To address...... this issue, we developed a multiscale framework that integrates modeling approaches across scales of cellular metabolism, bioreactor, bioprocess, and economy/ecosystem, and is able to simultaneously assess biological, technological, economic and environmental feasibility of different production scenarios...

A nuclear based hydrogen economy

International Nuclear Information System (INIS)

Sandquist, G.M.; Tamm, G.; Kunze, J.

2005-01-01

Exhausting demands are being imposed upon the world's ability to extract and deliver oil to the nations demanding fluid fossil fuels. This paper analyzes these issues and concludes that there must be no delay in beginning the development of the 'hydrogen economy' using nuclear energy as the primary energy source to provide both the fluid fuel and electrical power required in the 21st century. Nuclear energy is the only proven technology that is abundant and available worldwide to provide the primary energy needed to produce adequate hydrogen fluid fuel supplies to replace oil. Most importantly, this energy transition can be accomplished in an economical and technically proven manner while lowering greenhouse gas emissions. Furthermore, a similar application of using wind and solar to produce hydrogen instead of electricity for the grid can pave the way for the much larger production scales of nuclear plants producing both electricity and hydrogen. (authors)

Consumer perception of bio-based products-An exploratory study in 5 European countries

NARCIS (Netherlands)

Sijtsema, Siet J.; Onwezen, Marleen C.; Reinders, Machiel J.; Dagevos, Hans; Partanen, Asta; Meeusen-van Onna, Marieke

2016-01-01

This study explores people's perceptions (i.e., positive and negative associations, mixed feelings) regarding the concept of 'bio-based' in general and specific bio-based products. This exploratory study is one of the first consumer studies in the field of bio-based research. Three focus group

The energy economy

International Nuclear Information System (INIS)

Meritet, Sophie; Vaujour, Jean-Baptiste

2015-01-01

This introduction to the economy of energy applies the main economic concepts to the energy sector (nature of the good, supply, demand), proposes an overview of existing actors, and analyses challenges and tools of economic policy like network regulation, competition policy, independence and energy transition. By using recent examples, statistics and international comparisons, it gives elements to highlight issues like the relationship between shale gas exploitation and economic recovery in the USA, the choice between monopole and competition for electricity or gas supply, reaching greenhouse gas emissions of the energy sector by incentives or taxes, secure energy supplies in a changing international environment, ways to supply energy to everyone at prices guaranteeing economy competitiveness, or ways to evolve towards energy systems which would be more environment- and climate-friendly. The successive chapters address fundamentals issues (nature of the good, historical and technical overview), the State intervention (definition of an energy policy, steering the energy mix, ensuring secure supply), the reorganisation of industries and the protection of consumers, the relationship between energy and climate (worrying perspectives, progressive emergence of solutions). The last chapter addresses the future challenges like innovation, and disruptive innovations (smart grids, big data, batteries, CO 2 capture and storage, nuclear waste processing and management, development of nuclear fusion), and the issue of energy poverty

Unfunded pensions and endogenous labor supply

DEFF Research Database (Denmark)

Andersen, Torben M.; Bhattacharya, Joydeep

A classic result in dynamic public economics, dating back to Aaron (1966) and Samuelson (1975), states that there is no welfare rationale for PAYG pensions in a dynamically-efficient neoclassical economy with exogenous labor supply. This paper argues that this result, under the fairly-mild restri......A classic result in dynamic public economics, dating back to Aaron (1966) and Samuelson (1975), states that there is no welfare rationale for PAYG pensions in a dynamically-efficient neoclassical economy with exogenous labor supply. This paper argues that this result, under the fairly......-mild restriction that the old be no less risk-averse than the young, extends to a neoclassical economy with endogenous labor supply....

Cost of Oil and Biomass Supply Shocks under Different Biofuel Supply Chain Configurations

Energy Technology Data Exchange (ETDEWEB)

Uria Martinez, Rocio [ORNL; Leiby, Paul Newsome [ORNL; Brown, Maxwell L. [National Renewable Energy Laboratory (NREL)

2018-04-01

This analysis estimates the cost of selected oil and biomass supply shocks for producers and consumers in the light-duty vehicle fuel market under various supply chain configurations using a mathematical programing model, BioTrans. The supply chain configurations differ by whether they include selected flexibility levers: multi-feedstock biorefineries; advanced biomass logistics; and the ability to adjust ethanol content of low-ethanol fuel blends, from E10 to E15 or E05. The simulated scenarios explore market responses to supply shocks including substitution between gasoline and ethanol, substitution between different sources of ethanol supply, biorefinery capacity additions or idling, and price adjustments. Welfare effects for the various market participants represented in BioTrans are summarized into a net shock cost measure. As oil accounts for a larger fraction of fuel by volume, its supply shocks are costlier than biomass supply shocks. Corn availability and the high cost of adding biorefinery capacity limit increases in ethanol use during gasoline price spikes. During shocks that imply sudden decreases in the price of gasoline, the renewable fuel standard (RFS) biofuel blending mandate limits the extent to which flexibility can be exercised to reduce ethanol use. The selected flexibility levers are most useful in response to cellulosic biomass supply shocks.

Economy of wood supply

International Nuclear Information System (INIS)

Imponen, V.

1993-01-01

Research and development of wood fuels production was vigorous in the beginning of the 1980's. Techniques and working methods used in combined harvesting and transportation of energy and merchantable wood were developed in addition to separate energy wood delivery. After a ten year silent period the research on this field was started again. At present the underutilization of forest supplies and the environmental effects of energy production based on fossil fuels caused the rebeginning of the research. One alternative for reduction of the price of wood fuels at the utilization site is the integration of energy and merchantable wood deliveries together. Hence the harvesting and transportation devices can be operated effectively, and the organizational costs are decreased as well. The wood delivery costs consist of the stumpage price, the harvesting and transportation costs, and of general expenses. The stumpage price form the largest cost category (over 50 %) of the industrial merchantable wood delivery, and the harvesting and transportation costs in the case of thinningwood delivery. Forest transportation is the largest part of the delivery costs of logging residues. The general expenses, consisting of the management costs and the interest costs of the capital bound to the storages, form a remarkable cost category in delivery of low-rank wood for energy or conversion purposes. The costs caused by the harvesting of thinningwood, the logging residues, chipping and crushing, the lorry transportation are reviewed in this presentation

A mixed biomass-based energy supply chain for enhancing economic and environmental sustainability benefits: A multi-criteria decision making framework

International Nuclear Information System (INIS)

Mirkouei, Amin; Haapala, Karl R.; Sessions, John; Murthy, Ganti S.

2017-01-01

Highlights: •A mixed supply chain is developed to enhance sustainability benefits of bioenergy. •A decision-making framework is constructed to balance sustainability dimensions. •A stochastic optimization model is developed to explore the effects of uncertainty. •This study provides insights on bio-oil production processes and system structure. -- Abstract: Bioenergy sources have been introduced as a means to address challenges of conventional energy sources. The uncertainties of supply-side (upstream) externalities (e.g., collection and logistics) represent the key challenges in bioenergy supply chains and lead to reduce cross-cutting sustainability benefits. We propose a mixed biomass-based energy supply chain (consisting of mixed-mode bio-refineries and mixed-pathway transportation) and a multi-criteria decision making framework to address the upstream challenges. Our developed framework supports decisions influencing the economic and environmental dimensions of sustainability. Economic analysis employs a support vector machine technique, to predict the pattern of uncertainty parameters, and a stochastic optimization model, to incorporate uncertainties into the model. The stochastic model minimizes the total annual cost of the proposed mixed supply chain network by using a genetic algorithm. Environmental impact analysis employs life cycle assessment to evaluate the global warming potential of the cost-effective supply chain network. Our presented approach is capable of enhancing sustainability benefits of bioenergy industry infrastructure. A case study for the Pacific Northwest is used to demonstrate the application of the methodology and to verify the models. The results indicate that mixed supply chains can improve sustainability performance over traditional supply infrastructures by reducing costs (up to 24%) and environmental impacts (up to 5%).

Bio-based targeted chemical engineering education : Role and impact of bio-based energy and resourcedevelopment projects

NARCIS (Netherlands)

N.M. Márquez Luzardoa; Dr. ir. Jan Venselaar

2012-01-01

Avans University of Applied Sciences is redrafting its courses and curricula in view of sustainability. For chemical engineering in particular that implies a focus on 'green' and bio-based processes, products and energy. Avans is situated in the Southwest region of the Netherlands and specifically

Bio-Mimetic Sensors Based on Molecularly Imprinted Membranes

Directory of Open Access Journals (Sweden)

Catia Algieri

2014-07-01

Full Text Available An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.

Bio-Mimetic Sensors Based on Molecularly Imprinted Membranes

Science.gov (United States)

Algieri, Catia; Drioli, Enrico; Guzzo, Laura; Donato, Laura

2014-01-01

An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template) was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported. PMID:25196110

Production of bio-synthetic natural gas in Canada.

Science.gov (United States)

Hacatoglu, Kevork; McLellan, P James; Layzell, David B

2010-03-15

Large-scale production of renewable synthetic natural gas from biomass (bioSNG) in Canada was assessed for its ability to mitigate energy security and climate change risks. The land area within 100 km of Canada's network of natural gas pipelines was estimated to be capable of producing 67-210 Mt of dry lignocellulosic biomass per year with minimal adverse impacts on food and fiber production. Biomass gasification and subsequent methanation and upgrading were estimated to yield 16,000-61,000 Mm(3) of pipeline-quality gas (equivalent to 16-63% of Canada's current gas use). Life-cycle greenhouse gas emissions of bioSNG-based electricity were calculated to be only 8.2-10% of the emissions from coal-fired power. Although predicted production costs ($17-21 GJ(-1)) were much higher than current energy prices, a value for low-carbon energy would narrow the price differential. A bioSNG sector could infuse Canada's rural economy with $41-130 billion of investments and create 410,000-1,300,000 jobs while developing a nation-wide low-carbon energy system.

From bioethics to a sociology of bio-knowledge.

Science.gov (United States)

Petersen, Alan

2013-12-01

Growing recognition of bioethics' shortcomings, associated in large part with its heavy reliance on abstract principles, or so-called principlism, has led many scholars to propose that the field should be reformed or reconceptualised. Principlism is seen to de-contextualise the process of ethical decision-making, thus restricting bioethics' contributions to debate and policy on new and emergent biotechnologies. This article examines some major critiques of bioethics and argues for an alternative normative approach; namely, a sociology of bio-knowledge focussing on human rights. The article discusses the need for such an approach, including the challenges posed by the recent rise of 'the bio-economy'. It explores some potential alternative bases for a normative sociology of bio-knowledge, before presenting the elements of the proposed human rights-focused approach. This approach, it is argued, will benefit from the insights and concepts offered by various fields of critical scholarship, particularly the emergent sociology of human rights, science and technology studies, Foucaultian scholarship, and feminist bioethics. Copyright © 2013 Elsevier Ltd. All rights reserved.

French bio-diesel demand and promoting measures analysis by 2010

International Nuclear Information System (INIS)

Bernard, F.

2008-02-01

The researches presented aim at assessing bio-diesel promoting measures under consideration in France by 2010. This assessment is based on a deep study of French bio-diesel demand. The use of a linear model for optimizing the whole French refining industry costs allow us to take into account the physicochemical characteristics of bio-diesel useful for gas oil blending operation. This researches show that bio-diesel can be incorporated up to 27% blend in volume to diesel fuel without major technical problem. A decomposition of the value allotted to the bio-diesel by French refiners according to its physicochemical characteristics shows that energy content is the most disadvantageous characteristics for bio-diesel incorporation and, up to 17%, density become also constraining. However, the low bio-diesel sulphur content could become interesting from now to 2010. On the basis of this bio-diesel demand analysis, we proceed to an external coupling of an agro-industrial model of bio-diesel supply with the French refining model. Thus, we study the impact of the 2010 French bio-diesel consumption objective on agricultural surface need, the competitiveness of the bio-diesel, the reduction of greenhouse gases emissions and the trade balance of the petroleum products. On this basis, we propose a critical analysis of French bio-diesel promoting measures under consideration by 2010. (author)

Hydrogen economy

Energy Technology Data Exchange (ETDEWEB)

Pahwa, P.K.; Pahwa, Gulshan Kumar

2013-10-01

In the future, our energy systems will need to be renewable and sustainable, efficient and cost-effective, convenient and safe. Hydrogen has been proposed as the perfect fuel for this future energy system. The availability of a reliable and cost-effective supply, safe and efficient storage, and convenient end use of hydrogen will be essential for a transition to a hydrogen economy. Research is being conducted throughout the world for the development of safe, cost-effective hydrogen production, storage, and end-use technologies that support and foster this transition. This book discusses hydrogen economy vis-a-vis sustainable development. It examines the link between development and energy, prospects of sustainable development, significance of hydrogen energy economy, and provides an authoritative and up-to-date scientific account of hydrogen generation, storage, transportation, and safety.

Developing a hybrid dictionary-based bio-entity recognition technique

Science.gov (United States)

2015-01-01

Background Bio-entity extraction is a pivotal component for information extraction from biomedical literature. The dictionary-based bio-entity extraction is the first generation of Named Entity Recognition (NER) techniques. Methods This paper presents a hybrid dictionary-based bio-entity extraction technique. The approach expands the bio-entity dictionary by combining different data sources and improves the recall rate through the shortest path edit distance algorithm. In addition, the proposed technique adopts text mining techniques in the merging stage of similar entities such as Part of Speech (POS) expansion, stemming, and the exploitation of the contextual cues to further improve the performance. Results The experimental results show that the proposed technique achieves the best or at least equivalent performance among compared techniques, GENIA, MESH, UMLS, and combinations of these three resources in F-measure. Conclusions The results imply that the performance of dictionary-based extraction techniques is largely influenced by information resources used to build the dictionary. In addition, the edit distance algorithm shows steady performance with three different dictionaries in precision whereas the context-only technique achieves a high-end performance with three difference dictionaries in recall. PMID:26043907

Developing a hybrid dictionary-based bio-entity recognition technique.

Science.gov (United States)

Song, Min; Yu, Hwanjo; Han, Wook-Shin

2015-01-01

Bio-entity extraction is a pivotal component for information extraction from biomedical literature. The dictionary-based bio-entity extraction is the first generation of Named Entity Recognition (NER) techniques. This paper presents a hybrid dictionary-based bio-entity extraction technique. The approach expands the bio-entity dictionary by combining different data sources and improves the recall rate through the shortest path edit distance algorithm. In addition, the proposed technique adopts text mining techniques in the merging stage of similar entities such as Part of Speech (POS) expansion, stemming, and the exploitation of the contextual cues to further improve the performance. The experimental results show that the proposed technique achieves the best or at least equivalent performance among compared techniques, GENIA, MESH, UMLS, and combinations of these three resources in F-measure. The results imply that the performance of dictionary-based extraction techniques is largely influenced by information resources used to build the dictionary. In addition, the edit distance algorithm shows steady performance with three different dictionaries in precision whereas the context-only technique achieves a high-end performance with three difference dictionaries in recall.

Nigeria’s Mono-Cultural Economy: Impact Assessment and Prospects

Directory of Open Access Journals (Sweden)

Victor Nwaoba ITUMO

2016-12-01

Full Text Available The article takes an insight into the nature of the oil based mono-cultural economy of Nigeria, providing an in-depth analysis of the situation. It clearly assesses the oil resource based economy, highlights the impacts- positive and negative on Nigeria’s economic development and why Nigeria urgently needs to diversify its economy away from oil resource dependence. If Nigeria will not change the oil dependency economy, there will be grave implications for its economic growth and development as it already negatively affects annual budgetary provisions and other fiscal responsibilities. As it is well known, Nigeria is one of the foremost countries in the global oil export, with disruptions in its supply affecting the international oil market in some ways, huge reliance on oil as a resource has seen one of the foremost economies in Africa challenged in her economic growth and development with oil price volatility and decline on the global market. The research made use of secondary data to assess the situation and also drew the conclusion that Nigeria needs to diversify her economy as reliance on a basic resource discourages growth.

Center for BioBased Binders and Pollution Reduction Technology

Energy Technology Data Exchange (ETDEWEB)

Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

2013-07-01

Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

Advanced biomass science and technology for bio-based products: proceedings

Science.gov (United States)

Chung Hse; Zehui Jiang; Mon-Lin Kuo

2009-01-01

This book was developed from the proceedings of the Advanced Biomass Science and Technology for Bio-Based Products Symposium held in Beijing, China, May 23-25, 2007. The symposium was designed to provide a forum for researchers, producers, and consumers of biomass and bio-based products; to exchange information and ideas; and to stimulate new research and...

Supply chain collaboration in industrial symbiosis networks

NARCIS (Netherlands)

Herczeg, Gábor; Akkerman, Renzo; Hauschild, Michael Zwicky

2018-01-01

A strategy supporting the development towards a circular economy is industrial symbiosis (IS). It is a form of collaborative supply chain management aiming to make industry more sustainable and achieve collective benefits based on utilization of waste, by-products, and excess utilities between

Macroeconomic impacts of oil price shocks in Asian economies

International Nuclear Information System (INIS)

Cunado, Juncal; Jo, Soojin; Perez de Gracia, Fernando

2015-01-01

This paper analyzes the macroeconomic impact of structural oil shocks in four of the top oil-consuming Asian economies, using a VAR model. We identify three different structural oil shocks via sign restrictions: an oil supply shock, an oil demand shock driven by global economic activity and an oil-specific demand shock. The main results suggest that economic activity and prices respond very differently to oil price shocks depending on their types. In particular, an oil supply shock has a limited impact, while a demand shock driven by global economic activity has a significant positive effect in all four Asian countries examined. Our finding also includes that policy tools such as interest rates and exchange rates help mitigating the effects of supply shocks in Japan and Korea; however, they can be more actively used in response to demands shocks. - Highlights: • We analyze the effects of three structural oil price shocks on Asian economies. • Supply shocks have limited impact on the economic activity of Asian economies examined. • Demand shocks due to economic activity boosts GDP of all economies. • CPIs in India and Indonesia were only marginally affected by oil price shocks. • Monetary and exchange rate tools help mitigating supply shocks in Korea and Japan.

Engineering BioBrick vectors from BioBrick parts

Directory of Open Access Journals (Sweden)

Knight Thomas F

2008-04-01

Full Text Available Abstract Background The underlying goal of synthetic biology is to make the process of engineering biological systems easier. Recent work has focused on defining and developing standard biological parts. The technical standard that has gained the most traction in the synthetic biology community is the BioBrick standard for physical composition of genetic parts. Parts that conform to the BioBrick assembly standard are BioBrick standard biological parts. To date, over 2,000 BioBrick parts have been contributed to, and are available from, the Registry of Standard Biological Parts. Results Here we extended the same advantages of BioBrick standard biological parts to the plasmid-based vectors that are used to provide and propagate BioBrick parts. We developed a process for engineering BioBrick vectors from BioBrick parts. We designed a new set of BioBrick parts that encode many useful vector functions. We combined the new parts to make a BioBrick base vector that facilitates BioBrick vector construction. We demonstrated the utility of the process by constructing seven new BioBrick vectors. We also successfully used the resulting vectors to assemble and propagate other BioBrick standard biological parts. Conclusion We extended the principles of part reuse and standardization to BioBrick vectors. As a result, myriad new BioBrick vectors can be readily produced from all existing and newly designed BioBrick parts. We invite the synthetic biology community to (1 use the process to make and share new BioBrick vectors; (2 expand the current collection of BioBrick vector parts; and (3 characterize and improve the available collection of BioBrick vector parts.

MSU-Northern Bio-Energy Center of Excellence

Energy Technology Data Exchange (ETDEWEB)

Kegel, Greg [Montana State Univ., Bozeman, MT (United States); Alcorn-Windy Boy, Jessica [Montana State Univ., Bozeman, MT (United States); Abedin, Md. Joynal [Montana State Univ., Bozeman, MT (United States); Maglinao, Randy [Montana State Univ., Bozeman, MT (United States)

2014-09-30

MSU-Northern established the Bio-Energy Center (the Center) into a Regional Research Center of Excellence to address the obstacles concerning biofuels, feedstock, quality, conversion process, economic viability and public awareness. The Center built its laboratories and expertise in order to research and support product development and commercialization for the bio-energy industry in our region. The Center wanted to support the regional agricultural based economy by researching biofuels based on feedstock’s that can be grown in our region in an environmentally responsible manner. We were also interested in any technology that will improve the emissions and fuel economy performance of heavy duty diesel engines. The Center had a three step approach to accomplish these goals: 1. Enhance the Center’s research and testing capabilities 2. Develop advanced biofuels from locally grown agricultural crops. 3. Educate and outreach for public understanding and acceptance of new technology. The Center was very successful in completing the tasks as outlined in the project plan. Key successes include discovering and patenting a new chemical conversion process for converting camelina oil to jet fuel, as well as promise in developing a heterogeneous Grubs catalyst to support the new chemical conversion process. The Center also successfully fragmented and deoxygenated naturally occurring lignin with a Ni-NHC catalyst, showing promise for further exploration of using lignin for fuels and fuel additives. This would create another value-added product for lignin that can be sourced from beetle kill trees or waste products from cellulose ethanol fuel facilities.

KNOWLEDGE SOCIETY, GENERAL FRAMEWORK FOR KNOWLEDGE BASED ECONOMY

Directory of Open Access Journals (Sweden)

Dragos CRISTEA

2011-03-01

Full Text Available This paper tries to present the existent relation between knowledge society and knowledge based economy. We will identify the main pillars of knowledge society and present their importance for the development of knowledge societies. Further, we will present two perspectives over knowledge societies, respectively science and learning perspectives, that directly affects knowledge based economies. At the end, we will conclude by identifying some important questions that must be answered regarding this new social paradigm.

S-Layer Based Bio-Imprinting - Synthetic S-Layer Polymers

Science.gov (United States)

2015-07-09

AFRL-OSR-VA-TR-2015-0161 S-Layer Based Bio- Imprinting - Synthetic S-Layer Polymers Dietmar Pum ZENTRUM FUER NANOBIOTECHNOLOGIE Final Report 07/09...COVERED (From - To)      01-06-2012 to 31-05-2015 4.  TITLE AND SUBTITLE S-Layer Based Bio- Imprinting - Synthetic S-Layer Polymers 5a.  CONTRACT...technology for the fabrication of nano patterned thin film imprints by using functional S-layer protein arrays as templates. The unique feature of

Robust optimization on sustainable biodiesel supply chain produced from waste cooking oil under price uncertainty.

Science.gov (United States)

Zhang, Yong; Jiang, Yunjian

2017-02-01

Waste cooking oil (WCO)-for-biodiesel conversion is regarded as the "waste-to-wealthy" industry. This paper addresses the design of a WCO-for-biodiesel supply chain at both strategic and tactical levels. The supply chain of this problem is studied, which is based on a typical mode of the waste collection (from restaurants' kitchen) and conversion in the cities. The supply chain comprises three stakeholders: WCO supplier, integrated bio-refinery and demand zone. Three key problems should be addressed for the optimal design of the supply chain: (1) the number, sizes and locations of bio-refinery; (2) the sites and amount of WCO collected; (3) the transportation plans of WCO and biodiesel. A robust mixed integer linear model with muti-objective (economic, environmental and social objectives) is proposed for these problems. Finally, a large-scale practical case study is adopted based on Suzhou, a city in the east of China, to verify the proposed models. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Crude Reality; Exploring the Interdependencies of Energy (Oil), the Macro-Economy, and National Security

Science.gov (United States)

2012-04-11

Policy (SWEEP) optimizing our own natural resources in the near term (oil, natural gas, coal, nuclear, wind, solar, hydro, geothermal and synthetics... geothermal and synthetics), and displaces the oil based economy with a long term energy transformation plan based on renewable energy, is vital to...climb and supply begins to diminish. Global energy demands will continue to rise as the developing economies of countries like Brazil, Russia, China

Structural Prospects and Challenges for Bio Commodity Processes

Directory of Open Access Journals (Sweden)

Michael Narodoslawsky

2010-01-01

Full Text Available The current discussion about dwindling reserves of crude oil, rising fuel prices, global warming and supply disruption of natural gas has renewed interest in the provision of bioenergy and bio-based commodity products. There is a growing consensus that the 21st century will see a profound change in the resource base for industry and society, with less emphasis on fossil coal, oil and gas and more emphasis on renewable resources. This new resource base may take the form either of direct solar energy like photovoltaics and thermal solar energy or indirect utilisation of solar energy via biomass. Such a change in the raw material base, however, entails a profound revolution in the structure of processes, technologies employed and the economical framework of industry and society. Renewable resources constitute 'limited infinity': although they may be provided for infinite time, their yield is limited. This paper explores the strategic challenges for society in general and process industry in particular, and indicates some methodological approaches to meet these challenges, exemplified in case studies about decentralised bioethanol production and decentralised multifunctional production centres. The paper shows that utilising renewable resources enlarges the process concept by including resource provision and logistics into the process design. It also highlights a new balance between economy and ecology of scale when resource provision and logistics are taken into account. Ecological process evaluation as analytical methods and process synthesis as design methods will gain increasing importance for process technology as the share of renewable resources is increased.

Biomass feedstock production systems: economic and environmental benefits

Science.gov (United States)

Mark D. Coleman; John A. Stanturf

2006-01-01

The time is ripe for expanding bioenergy production capacity and developing a bio-based economy. Modern society has created unprecedented demands for energy and chemical products that are predominately based on geologic sources. However, there is a growing consensus that constraints on the supply of petroleum and the negative environmental consequences of burning...

Rumo ao desenvolvimento espacial sustentável? Explorando as implicações da nova bioeconomia no setor agroalimentar e na inovação regional Towards sustainable spatial development? Exploring the implications of the emerging bio-economy in agri-food and regional innovation

Directory of Open Access Journals (Sweden)

Ina Horlings

2011-08-01

Full Text Available O paradigma da bioeconomia pode ser descrito como o conjunto das atividades econômicas que captam o valor latente em processos biológicos e nos biorecursos renováveis, para produzir melhores condições de saúde, além de crescimento e desenvolvimento sustentáveis. Este artigo faz uma revisão crítica do impacto da bioeconomia emergente sobre o desenvolvimento rural. São descritas algumas das consequências do desenvolvimento rural bioeconômico, na esfera agroalimentar e da inovação regional baseada em uma definição específica -e, de nosso ponto de vista, fraca -de Modernização Ecológica. A questão central, então, é: quais são as bases conceituais, a força impulsora, as expressões empíricas e as implicações do desenvolvimento bioeconômico? Argumenta-se que, embora a bioeconomia faça duras cobranças em relação à sustentabilidade, também deixa lacunas, apresenta al-guns efeitos secundários negativos, tanto ambientais como sociais, e corre o risco de ser uma economia parcial. Sustentamos, ainda, que a trajetória do desenvolvimento ecoeconômico pode constituir uma boa alternativa para localidades particularmente vulneráveis que queiram aumentar sua resiliência.The bio-economic paradigm can be described as those economic activities which capture the latent value in biological processes and renewable bioresources to produce improved health and sustainable growth and development. This article is a critical review of the impact of the emerging bio-economy in rural development. It describes some of its consequences in the sphere of agri-food and regional innovation based on a specific -and in our opinion weak - definition of Ecological Modernization. The central question then is: what are the conceptual roots, driving forces, empirical expressions and implications of bio-economic development? We argue that although the bio-economy makes severe sustainability claims, it also shows some missing links, has some negative

Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites

Directory of Open Access Journals (Sweden)

Maria Chiara Mistretta

2018-04-01

Full Text Available The use of biodegradable/bio-based polymers is of great importance in addressing several issues related to environmental protection, public health, and new, stricter legislation. Yet some applications require improved properties (such as barrier or mechanical properties, suggesting the use of nanosized fillers in order to obtain bio-based polymer nanocomposites. In this work, bionanocomposites based on two different biodegradable polymers (coming from the Bioflex and MaterBi families and two different nanosized fillers (organo-modified clay and hydrophobic-coated precipitated calcium carbonate were prepared and compared with traditional nanocomposites with high-density polyethylene (HDPE as matrix. In particular, the injection molding processability, as well as the mechanical and rheological properties of the so-obtained bionanocomposites were investigated. It was found that the processability of the two biodegradable polymers and the related nanocomposites can be compared to that of the HDPE-based systems and that, in general, the bio-based systems can be taken into account as suitable alternatives.

FROM CIRCULAR ECONOMY TO BLUE ECONOMY

Directory of Open Access Journals (Sweden)

Iustin-Emanuel, ALEXANDRU

2014-11-01

Full Text Available Addressing the subject of this essay is based on the background ideas generated by a new branch of science - Biomimicry. According to European Commissioner for the Environment, "Nature is the perfect model of circular economy". Therefore, by imitating nature, we are witnessing a process of cycle redesign: production-consumption-recycling. The authors present some reflections on the European Commission's decision to adopt after July 1, 2014 new measures concerning the development of more circular economies. Starting from the principles of Ecolonomy, which is based on the whole living paradigm, this paper argues for the development within each economy of entrepreneurial policies related to the Blue economy. In its turn, Blue economy is based on scientific analyses that identify the best solutions in a business. Thus, formation of social capital will lead to healthier and cheaper products, which will stimulate entrepreneurship. Blue economy is another way of thinking economic practice and is a new model of business design. It is a healthy, sustainable business, designed for people. In fact, it is the core of the whole living paradigm through which, towards 2020, circular economy will grow more and more.

Emergy-based ecological account for the Chinese economy in 2004

Science.gov (United States)

Jiang, M. M.; Zhou, J. B.; Chen, B.; Chen, G. Q.

2008-12-01

This paper provides an integrated study on the ecological account for the Chinese economy in 2004 based on emergy synthesis theory. The detailed flows of the Chinese economy is diagramed, accounted and analyzed in categories using the biophysically based ecological accounting. Through calculating environmental and economic inputs within and outside the Chinese economy, this paper discusses the Chinese international exchange, describes the resource structure, and assesses its sustainability as a whole. Also, the comparison of systematic indicators, such as emergy/dollar ratio, environmental load ratio, and emergy self-support ratio, with those of the other countries is tabled and explored to illustrate the general status of the Chinese economy in the world. Take, for example, the environmental load ratio, which was 9.29 in China 2004, it reveals that the Chinese economy put high pressure on the local environment compared with those of the environment-benign countries, such as Brazil (0.75), Australia (0.86) and New Zealand (0.81). In addition, in this paper, the accounting method of tourism is adjusted based on the previous researches.

Teaching New Keynesian Open Economy Macroeconomics at the Intermediate Level

Science.gov (United States)

Bofinger, Peter; Mayer, Eric; Wollmershauser, Timo

2009-01-01

For the open economy, the workhorse model in intermediate textbooks still is the Mundell-Fleming model, which basically extends the investment and savings, liquidity preference and money supply (IS-LM) model to open economy problems. The authors present a simple New Keynesian model of the open economy that introduces open economy considerations…

Economics of the energy economy; Oekonomie der Energiewirtschaft

Energy Technology Data Exchange (ETDEWEB)

Henrichs, Birgit

2008-11-15

The series designed by the Federal Association of Energy and Water Economy (BDEW) presents the topic energy by means of an interdisciplinary way in seven magazines. Each magazine is dedicated to important sub-topics. The series does not only address teachers of subjects in the field of natural sciences like physics, biology and chemistry but also teachers of the subjects social studies, geography, work studies and technology of the forms 5 - 10. The present seventh magazine of the study sequence is dedicated to the subject economics of the energy economy. The following aspects are described: the history of energy supply by pipelines, from a monopoly to competition, the electric power and gas market and its mechanism, basic elements of the energy policy, the role of the energy economy in the overall economy as well as perspectives of the world energy supply. (orig./RHN)

Sustainability benefits and challenges of inter-organizational collaboration in bio-based business

NARCIS (Netherlands)

Nuhoff-Isakhanyan, Gohar; Wubben, Emiel F.M.; Omta, S.W.F.

2016-01-01

Bio-based businesses are often considered to be sustainable. However, they are also linked to sustainability challenges such as deforestation and soil erosion. Encouraged to exploit innovative solutions and enhance sustainability, organizations engaged in bio-based activities extensively explore

Bio-based composite pedestrian bridge. Part 2: materials and production process

NARCIS (Netherlands)

Lepelaar, Mark; Hoogendoorn, Alwin; Blok, Rijk; Teuffel, Patrick; Kawaguchi, K.; Ohsaki, M.; Takeuchi, T.

2016-01-01

The Bio-based composite bridge is a 3TU project which aims to design and realize a 14m span pedestrian bridge made from fibre-reinforced polymers (FRP) and which is introduced in part 1 of this paper. Part 2 will focus on various studies about bio-based materials, which are suitable for structural

Influence of Relationship Commitment and Trust on Collaborative Behaviour in Supply Chains

Directory of Open Access Journals (Sweden)

Sonja Mlaker Kač

2015-03-01

Full Text Available The paper discusses theoretically and examines empirically the influence of the relationship commitment on collaborative behaviour in supply chains. In today’s unstable business environment companies should collaborate to achieve mutual goals and competitive advantage. Defining relationship commitment and collaboration in supply chains (from social exchange theory point of view is the basis of the research of this paper. Our aim is to examine the influence of relationship commitment on collaboration in supply chains in Slovenian economy. The qualitative research part discusses if the relationship commitment between partners in supply chain influences the collaborative behaviour between partners and which are the antecedents of relationship commitment. The research is based on a quantitative analysis of the online questionnaire survey made on the Slovenian economy. The research results show strong influence of trust and relationship commitment on collaboration between partners in supply chains.

Bio-fuels of the first generation

International Nuclear Information System (INIS)

2012-04-01

After having briefly recalled the objective of use of renewable energies and the role bio-fuels may play, this publication briefly presents various bio-fuels: bio-diesel (from colza, soybean or sunflower oil), and ethanol (from beet, sugar cane, wheat or corn). Some key data regarding bio-fuel production and use in France are briefly commented. The publication outlines strengths (a positive energy assessment, a decreased dependency on imported fossil fuels and a higher supply safety, a diversification of agriculture revenues and prospects, a reduction of greenhouse gas emissions) and weaknesses (uncertainty regarding the evolution of soil use, an environmental impact related to farming methods) of this sector. Actions undertaken by the ADEME in collaboration with other agencies and institutions are briefly overviewed

BioCreative V BioC track overview: collaborative biocurator assistant task for BioGRID.

Science.gov (United States)

Kim, Sun; Islamaj Doğan, Rezarta; Chatr-Aryamontri, Andrew; Chang, Christie S; Oughtred, Rose; Rust, Jennifer; Batista-Navarro, Riza; Carter, Jacob; Ananiadou, Sophia; Matos, Sérgio; Santos, André; Campos, David; Oliveira, José Luís; Singh, Onkar; Jonnagaddala, Jitendra; Dai, Hong-Jie; Su, Emily Chia-Yu; Chang, Yung-Chun; Su, Yu-Chen; Chu, Chun-Han; Chen, Chien Chin; Hsu, Wen-Lian; Peng, Yifan; Arighi, Cecilia; Wu, Cathy H; Vijay-Shanker, K; Aydın, Ferhat; Hüsünbeyi, Zehra Melce; Özgür, Arzucan; Shin, Soo-Yong; Kwon, Dongseop; Dolinski, Kara; Tyers, Mike; Wilbur, W John; Comeau, Donald C

2016-01-01

BioC is a simple XML format for text, annotations and relations, and was developed to achieve interoperability for biomedical text processing. Following the success of BioC in BioCreative IV, the BioCreative V BioC track addressed a collaborative task to build an assistant system for BioGRID curation. In this paper, we describe the framework of the collaborative BioC task and discuss our findings based on the user survey. This track consisted of eight subtasks including gene/protein/organism named entity recognition, protein-protein/genetic interaction passage identification and annotation visualization. Using BioC as their data-sharing and communication medium, nine teams, world-wide, participated and contributed either new methods or improvements of existing tools to address different subtasks of the BioC track. Results from different teams were shared in BioC and made available to other teams as they addressed different subtasks of the track. In the end, all submitted runs were merged using a machine learning classifier to produce an optimized output. The biocurator assistant system was evaluated by four BioGRID curators in terms of practical usability. The curators' feedback was overall positive and highlighted the user-friendly design and the convenient gene/protein curation tool based on text mining.Database URL: http://www.biocreative.org/tasks/biocreative-v/track-1-bioc/. Published by Oxford University Press 2016. This work is written by US Government employees and is in the public domain in the US.

''Green'' path from fossil-based to hydrogen economy: An overview of carbon-neutral technologies

Energy Technology Data Exchange (ETDEWEB)

Muradov, Nazim Z. [Florida Solar Energy Center, University of Central Florida, Cocoa, FL 32922 (United States); Veziroglu, T. Nejat [Clean Energy Research Institute, University of Miami, Coral Gables, FL 33124 (United States)

2008-12-15

While the dominant role of hydrogen in a sustainable energy future is widely accepted, the strategies for the transition from fossil-based to hydrogen economy are still actively debated. This paper emphasizes the role of carbon-neutral technologies and fuels during the transition period. To satisfy the world's growing appetite for energy and keep our planet healthy, at least 10 TW (or terawatt) of carbon-free power has to be produced by mid-century. Three prominent options discussed in the literature include: decarbonization of fossil energy, nuclear energy and renewable energy sources. These options are analyzed in this paper with a special emphasis on the role of hydrogen as a carbon-free energy carrier. In particular, the authors compare various fossil decarbonization strategies and evaluate the potential of nuclear and renewable energy resources to meet the 10 TW target. An overview of state-of-the-art technologies for production of carbon-free energy carriers and transportation fuels, and the assessment of their commercial potential is provided. It is shown that neither of these three options alone could provide 10 TW of carbon-neutral power without major changes in the existing infrastructure, and/or technological breakthroughs in many areas, and/or a considerable environmental risk. The authors propose a scenario for the transition from current fossil-based to hydrogen economy that includes two key elements: (i) changing the fossil decarbonization strategy from one based on CO{sub 2} sequestration to one that involves sequestration and/or utilization of solid carbon, and (ii) producing carbon-neutral synthetic fuels from bio-carbon and hydrogen generated from water using carbon-free sources (nuclear, solar, wind, geothermal). This strategy would allow taking advantage of the existing fuel infrastructure without an adverse environmental impact, and it would secure a smooth carbon-neutral transition from fossil-based to future hydrogen economy. (author)

IS THE ETHICS OF ECONOMIES ADAPTED OR NOT TO THE IMPERATIVE OF BIOETHICS

Directory of Open Access Journals (Sweden)

Dejan Donev

2012-09-01

Full Text Available The ethics in economy is not only a corrector, but also must be initiator if we want to achieve essence of our existence - the human being as “Homo ethicus”, as well as, which is more important for mankind - to achieve a human being as “Homo homine ethica ethicus est”. This remark points on two things. First: we came to the stage where we become aware about the fact that our economies are dehumanized. The second: that’s the reason why we must return to ethics and pull out from it that universal values which will make the managers of natural recourses more ethically awarded, so they will be able to start managing production without endangering bio potentials anymore. Previous remark lead us to conclusion that, no matter if the idiom “business ethics” is oxymoron or not, the present ethics is more a list of rules of conduction or, more precisely, etiquette. This clearly points that this kind of ethics of economy and in economy is not adoptive to the imperative of Bioethics: Don’t misuse recourses if you want to feed yourself and those for which you create the existence! This is so because always when we talk about ethics and ethicizing of those which managing the base of existence, de facto, are discussions about choosing the appropriate model of capitalism. The problem of these “discussions” is that we almost always forget to explain: is the chosen model of capitalization of society applicable considering the local specifics and needs of community? Therefore, the imperative of Bioethics, in this context, is to teach the ethics how to think about bio resource and bio heritage, even if we stop talk of some kinds of ethics and ethicizing of economies and of those which managing with it, because if we reconsider the reactions of the population, it is clear that they are seek of talking about it. But also, it’s recognizable the fact that they who talks just show that the essential thinking about Bioethics is absent and that the

Bio-fuel co-products in France: perspectives and consequences for cattle food

International Nuclear Information System (INIS)

2010-01-01

The development of bio-fuels goes along with that of co-products which can be used to feed animals. After having recalled the political context which promotes the development of renewable energies, this document aims at giving an overview of the impact of bio-fuel co-products on agriculture economy. It discusses the production and price evolution for different crops

Alignment of global supply networks based on strategic groups of supply chains

Directory of Open Access Journals (Sweden)

Nikos G. Moraitakis

2017-09-01

Full Text Available Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic supply chain perspective in order to align regional competitive priorities and supply chain structures. The objective of this research is hence to develop an approach for the supply-chain-based alignment of complex global supply networks. Method: We review existing literature from the fields of supply chain and network management, strategic sourcing, and strategic management. Based on the literature review and theoretical and practical considerations we deduce a conceptual approach to consider upstream supply chain structures in supply network alignment initiatives. Results: On the basis of these considerations and current empirical literature we transfer strategic group theory to the supply network management context. The proposed approach introduces strategic groups of supply chains as a segmentation criterion for complex global supply networks which enables the network-wide alignment of competitive priorities. Conclusion: Supply-chain-based segmentation of global supply network structures can effectively reduce the complexity, firms face when aiming to strategically align their supply chains on a holistic level. The results of this research are applicable for certain types of global supply networks and can be used for network alignment and strategy development. The approach can furthermore generate insights useable for negotiation support with suppliers.

Bio-based fillers for environmentally friendly composites

CSIR Research Space (South Africa)

Mokhothu, Thabang H

2017-03-01

Full Text Available The use of bio-based fillers as alternative replacement for synthetic fillers has been dictated by increasing ecological concerns as well as depleting petroleum resources. The other aspect is a growing need for eco-friendly, renewable...

Knowledge based economy: The role of expert diaspora

Directory of Open Access Journals (Sweden)

Filipović Jovan

2012-01-01

Full Text Available Diasporas stand out as an economic or cultural avant-garde of transformation. This is especially true for academic and other intellectual Diaspora communities, because science and knowledge creation are global enterprises. Proclivity of knowledge workers to move in order to improve and absorb transnational knowledge through Diaspora networks might be an essential quality of an emerging national economy of a developing country. The article treats the role of expert Diaspora in knowledge based economy, innovation and talent management. Besides presenting the essentials of knowledge based economy and innovation, it discusses the role of expert Diaspora in science, technology and innovation (STI capacity building. Also, the article emphasizes the importance of leadership for talent and its implications for Diaspora. Using WEF statistics, it illustrates negative consequences of the sad policy of “Chaseaway the brightest and the best” for innovative capacity, competitiveness, and prosperity of nations.

Understanding intentions to purchase bio-based products

NARCIS (Netherlands)

Onwezen, Marleen C.; Reinders, Machiel J.; Sijtsema, Siet J.

2017-01-01

This article aims to explore whether subjective ambivalence increases the understanding of consumers' intentions to buy bio-based products. Subjective ambivalence is the aversive feeling that accompanies evaluations containing both negative and positive elements. Two studies (N = 1851) in six

Market development problems for sustainable bio-energy systems in Sweden. (The BIOMARK project)

Energy Technology Data Exchange (ETDEWEB)

Helby, Peter (ed.); Boerjesson, Paal; Hansen, Anders Christian; Roos, Anders; Rosenqvist, Haakan; Takeuchi, Linn

2003-03-01

The report consists of three case studies relating to Swedish bio-energy markets. The first is concerned with a general analysis of costs and benefits of transition to biomass-based electricity in Sweden. The analysis indicates that many price relations in Sweden do not support the transition to bio-energy. Future prospects for biomass conversion technologies versus natural gas based technologies may not be in favour of bio-energy with the existing fuel prices. Additionally, there is no effective utilisation of the large economic benefits that could be gained by coordinating the bio-energy fuel chain with the management of other material flows such as the nutrient flows in the water cycle. In government policies, the supply of biomass does not seem to receive the same attention as the conversion technologies. Potentially, this could lead to a shortage of biomass feedstock when the conversion technology part of the programmes succeeds. The second study is about market development for energy crops, specifically Salix. The analysis shows that real-life development is far behind prognoses and scenarios, confirming worries about future supplies of biomass. While Salix is associated with significant positive externalities and provides a large potential for co-benefits, the institutional setting is not favourable for the exploitation of these advantages. A particular problem is the high risk farmers face when planting Salix, as future demand is uncertain and prices difficult to predict. A better distribution of risk among the market actors, particularly between farmers and district heating companies, might be the best strategy for renewed growth in this sector. The third study is concerned with the wood pellets market, which experienced a supply crisis in the winter 2001/02, as producers were unable to satisfy demand or did so only at highly elevated prices. The analysis points to weakness in market governance, especially insufficient information flows between actors

Market development problems for sustainable bio-energy systems in Sweden. (The BIOMARK project)

International Nuclear Information System (INIS)

Helby, Peter; Boerjesson, Paal; Hansen, Anders Christian; Roos, Anders; Rosenqvist, Haakan; Takeuchi, Linn

2003-03-01

The report consists of three case studies relating to Swedish bio-energy markets. The first is concerned with a general analysis of costs and benefits of transition to biomass-based electricity in Sweden. The analysis indicates that many price relations in Sweden do not support the transition to bio-energy. Future prospects for biomass conversion technologies versus natural gas based technologies may not be in favour of bio-energy with the existing fuel prices. Additionally, there is no effective utilisation of the large economic benefits that could be gained by coordinating the bio-energy fuel chain with the management of other material flows such as the nutrient flows in the water cycle. In government policies, the supply of biomass does not seem to receive the same attention as the conversion technologies. Potentially, this could lead to a shortage of biomass feedstock when the conversion technology part of the programmes succeeds. The second study is about market development for energy crops, specifically Salix. The analysis shows that real-life development is far behind prognoses and scenarios, confirming worries about future supplies of biomass. While Salix is associated with significant positive externalities and provides a large potential for co-benefits, the institutional setting is not favourable for the exploitation of these advantages. A particular problem is the high risk farmers face when planting Salix, as future demand is uncertain and prices difficult to predict. A better distribution of risk among the market actors, particularly between farmers and district heating companies, might be the best strategy for renewed growth in this sector. The third study is concerned with the wood pellets market, which experienced a supply crisis in the winter 2001/02, as producers were unable to satisfy demand or did so only at highly elevated prices. The analysis points to weakness in market governance, especially insufficient information flows between actors

Cascading of Biomass. 13 Solutions for a Sustainable Bio-based Economy. Making Better Choices for Use of Biomass Residues, By-products and Wastes

Energy Technology Data Exchange (ETDEWEB)

Odegard, I.; Croezen, H.; Bergsma, G.

2012-08-15

Smarter and more efficient use of biomass, referred to as cascading, can lead to an almost 30% reduction in European greenhouse gas emissions by 2030 compared with 2010. As the title study makes clear, cascading of woody biomass, agricultural and industrial residues and other waste can make a significant contribution to a greening of the economy. With the thirteen options quantitatively examined annual emissions of between 330 and 400 Mt CO2 can be avoided by making more efficient use of the same volume of biomass as well as by other means. 75% of the potential CO2 gains can be achieved with just four options: (1) bio-ethanol from straw, for use as a chemical feedstock; (2) biogas from manure; (3) biorefining of grass; and (4) optimisation of paper recycling. Some of the options make multiple use of residues, with biomass being used to produce bioplastics that, after several rounds of recycling, are converted to heat and power at the end of their life, for example. In other cases higher-grade applications are envisaged: more efficient use of recyclable paper and wood waste, in both economic and ecological terms, using them as raw materials for new paper and chipboard rather than as an energy source. Finally, by using smart technologies biomass can be converted to multiple products.

Projections for the Production of Bulk Volume Bio-Based Polymers in Europe and Environmental Implications

NARCIS (Netherlands)

Patel, M.K.; Crank, M.

2007-01-01

In this paper we provide an overview of the most important emerging groups of bio-based polymers for bulk volume applications and we discuss market projections for these types of bio-based polymers in the EU, thereby distinguishing between three scenarios. Bio-based polymers are projected to reach a

The development of Bio-pharmaceutical industry in China: problems and solutions.

Science.gov (United States)

Yan, Gujun

2014-07-01

Known as the "sunrise industry" of the 21st century, bio-pharmaceutical industry has been a fast-growing global industry, and many countries have been developing this industry as the focus of their national economies. In China, there exists a huge market demand for the development of bio-pharmaceutical industry, but at the present stage the industry is faced with some problems, such as low level of R & D for innovative drugs, and inappropriate capital investment in the industrialization. In order to accelerate the development of China's bio-pharmaceutical industry, it is necessary to take strategic initiatives of improving the technology transfer system, developing the bio-pharmaceutical outsourcing, and building a diversified industrial financing system.

Opportunities for using bio-based fibers for value-added composites

Science.gov (United States)

Zhiyong Cai; Jerrold E. Winandy

2006-01-01

Efficient and economical utilization of various bio-based materials is an effective way to improve forest management, promote long-term sustainability, and restore native ecosystems. However, the dilemma is how to deal with lesser used, undervalued or no-value bio-resources such as small diameter trees, agricultural residues (wheat straw, rice straw, and corn stalk),...

Oil-based technology and economy. Prospects for the future. A short introduction to basic issues and a review of oil depletion projections derived from different theories and methods

International Nuclear Information System (INIS)

Illum, K.

2004-03-01

The evidence presented in this review shows that forecasts made by governmental and international institutions differ markedly from the results of analyses made by individual, independent researchers and some analysts representing the oil industry. The oil industry's analysts point to ever greater costs of matching growing demand with supply from an aging resource base. Depending mainly on developments in the Middle East and the development of the world economy in the coming years, production may peak within one or two decades. It is a question of geology, technology, economy, and the policies conducted by various nations. The trouble is that no realistic technological, economic and political strategies for the warding off of the impacts of a decline in conventional oil supply are in sight. (AU)

Bio-refinery approach for spent coffee grounds valorization.

Science.gov (United States)

Mata, Teresa M; Martins, António A; Caetano, Nídia S

2018-01-01

Although normally seen as a problem, current policies and strategic plans concur that if adequately managed, waste can be a source of the most interesting and valuable products, among which metals, oils and fats, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, pigments, flavonoids, through recycling, compound recovery or energy valorization, following the waste hierarchy. Besides contributing to more sustainable and circular economies, those products also have high commercial value when compared to the ones obtained by currently used waste treatment methods. In this paper, it is shown how the bio-refinery framework can be used to obtain high value products from organic waste. With spent coffee grounds as a case study, a sequential process is used to obtain first the most valuable, and then other products, allowing proper valorization of residues and increased sustainability of the whole process. Challenges facing full development and implementation of waste based bio-refineries are highlighted. Copyright © 2017 Elsevier Ltd. All rights reserved.

Metal supply constraints for a low-carbon economy?

NARCIS (Netherlands)

Koning, A. de; Kleijn, R.; Huppes, G.; Sprecher, B.; Engelen, G. van; Tukker, A.

2018-01-01

Low-carbon energy systems are more metal-intensive than traditional energy systems. Concerns have been expressed that this may hamper the transition to a low-carbon economy. We estimate the required extraction of Fe, Al, Cu, Ni, Cr, In, Nd, Dy, Li, Zn, and Pb until 2050 under several

BIOS Security Analysis and a Kind of Trusted BIOS

Science.gov (United States)

Zhou, Zhenliu; Xu, Rongsheng

The BIOS's security threats to computer system are analyzed and security requirements for firmware BIOS are summarized in this paper. Through discussion about TCG's trust transitivity, a new approach about CRTM implementation based on BIOS is developed. In this paper, we also put forward a new trusted BIOS architecture-UTBIOS which is built on Intel Framework for EFI/UEFI. The trustworthiness of UTBIOS is based on trusted hardware TPM. In UTBIOS, trust encapsulation and trust measurement are used to construct pre-OS trust chain. Performance of trust measurement is also analyzed in the end.

The Rebirth of Waste Cooking Oil to Novel Bio-based Surfactants

Science.gov (United States)

Zhang, Qi-Qi; Cai, Bang-Xin; Xu, Wen-Jie; Gang, Hong-Ze; Liu, Jin-Feng; Yang, Shi-Zhong; Mu, Bo-Zhong

2015-05-01

Waste cooking oil (WCO) is a kind of non-edible oil with enormous quantities and its unreasonable dispose may generate negative impact on human life and environment. However, WCO is certainly a renewable feedstock of bio-based materials. To get the rebirth of WCO, we have established a facile and high-yield method to convert WCO to bio-based zwitterionic surfactants with excellent surface and interfacial properties. The interfacial tension between crude oil and water could reach ultra-low value as 0.0016 mN m-1 at a low dosage as 0.100 g L-1 of this bio-based surfactant without the aid of extra alkali, which shows a strong interfacial activity and the great potential application in many industrial fields, in particular, the application in enhanced oil recovery in oilfields in place of petroleum-based surfactants.

The role of entrepreneurship in transforming efficiency economies into innovation-based economies

Directory of Open Access Journals (Sweden)

Jurie van Vuuren

2018-04-01

Full Text Available Background: Entrepreneurship is believed to be a major driver of economic development. While it is right to consider entrepreneurship as a development tool, it is also crucial to identify the kind of entrepreneurship that contributes meaningfully towards economic development. Extant research revealed a U-shaped relationship between entrepreneurship and economic development and claimed that entrepreneurship in efficiency economies is dwarfed in terms of its contribution to economic development.   Aim: To identify and explain factors that would assist efficiency-based countries to transform their economies using entrepreneurship as a major policy tool.   Setting: We compared two structurally separate groups of countries. Each group consists of three countries and 9 years of data were extracted from Global Entrepreneurship Monitoring (GEM and United Nation (UN datasets.   Methods: We examined the relationship between entrepreneurship and economic development using comparative research design. Bivariate correlation analysis was used to detect associations and various descriptive statistical tools were applied to examine and compare the entrepreneurial tendencies of countries included in our study.   Results: The results indicated that entrepreneurship in efficiency economies is unfairly undervalued by academic commentators and that our findings pose a serious question as to the U-shaped relationship argument. The analysis revealed that the relationship between entrepreneurship and economic development is positive in both contexts, albeit the strength of the correlation is much more pronounced for innovation-driven economies compared to efficiency-driven countries. Furthermore, the analysis revealed that the rate of total early-stage entrepreneurial activity (TEA is strongly correlated with perceived opportunity and entrepreneurial intention scores in both contexts.   Conclusion: It is concluded that countries seeking to transform their

Environmental cost-effectiveness of bio diesel production in Greece: Current policies and alternative scenarios

International Nuclear Information System (INIS)

Iliopoulos, Constantine; Rozakis, Stelios

2010-01-01

Following European Directive 2003/30/EC, the Greek Government adapted legislation that introduces and regulates the bio diesel market. The implemented quota scheme allocates the country's annual, predetermined, tax exempt production of bio diesel to industries based on their ability to meet several criteria. A number of bio diesel supply chain stakeholders have criticized this policy for being efficiency-robbing and vague. This paper uses 2007 data from energy crop farms and three bio diesel-producing companies in order to assess these criticisms. We study the economic and environmental aspects of the currently adopted policy and compare them to three alternative scenarios. We conclude that such criticisms have a merit and that policy makers need to reconsider their alternative options regarding the promotion of bio diesel in transport. Permission of sales directly to local consumers and promotion of forward integration by farmers are efficiency enhancing and environment-friendly means of promoting the use of bio diesel in transport.

True Nature of Supply Network Communication Structure

Directory of Open Access Journals (Sweden)

Lokhman Hakim bin Osman

2016-04-01

Full Text Available Globalization of world economy has altered the definition of organizational structure. Global supply chain can no longer be viewed as an arm-length structure. It has become more complex. The complexity demands deeper research and understanding. This research analyzed a structure of supply network in an attempt to elucidate the true structure of the supply network. Using the quantitative Social Network Analysis methodology, findings of this study indicated that, the structure of the supply network differs depending on the types of network relations. An important implication of these findings would be a more focus resource management upon network relationship development that is based on firms’ positions in the different network structure. This research also contributes to the various strategies of effective and efficient supply chain management.

Viscous Flow Behaviour of Karanja Oil Based Bio-lubricant Base Oil.

Science.gov (United States)

Sharma, Umesh Chandra; Sachan, Sadhana; Trivedi, Rakesh Kumar

2018-01-01

Karanja oil (KO) is widely used for synthesis of bio-fuel karanja oil methyl ester (KOME) due to its competitive price, good energy values and environmentally friendly combustion properties. Bio-lubricant is another value added product that can be synthesized from KO via chemical modification. In this work karanja oil trimethylolpropane ester (KOTMPE) bio-lubricant was synthesized and evaluated for its viscous flow behaviour. A comparison of viscous flow behaviours of natural KO and synthesized bio-fuel KOME and bio-lubricant KOTMPE was also made. The aim of this comparison was to validate the superiority of KOTMPE bio-lubricant over its precursors KO and KOME in terms of stable viscous flow at high temperature and high shear rate conditions usually encountered in engine operations and industrial processes. The free fatty acid (FFA) content of KO was 5.76%. KOME was synthesized from KO in a two-step, acid catalyzed esterification followed by base catalyzed transesterification, process at 65°C for 5 hours with oil-methanol ratio 1:6, catalysts H 2 SO 4 and KOH (1 and 1.25% w/w KO, respectively). In the final step, KOTMPE was prepared from KOME via transesterification with trimethylolpropane (TMP) at 150°C for 3 hours with KOME-TMP ratio 4:1 and H 2 SO 4 (2% w/w KOME) as catalyst. The viscosity versus temperature studies were made at 0-80°C temperatures in shear rate ranges of 10-1000 s -1 using a Discovery Hybrid Rheometer, model HR-3 (TA instruments, USA). The study found that viscosities of all three samples decreased with increase in temperature, though KOTMPE was able to maintain a good enough viscosity at elevated temperatures due to chemical modifications in its molecular structure. The viscosity index (VI) value for KOTMPE was 206.72. The study confirmed that the synthesized bio-lubricant KOTMPE can be used at high temperatures as a good lubricant, though some additives may be required to improve properties other than viscosity.

New Challenges and Opportunities for Putting into Value the Diversity of the Danube Territorial Capital, as a “European Axis” in light of Bio-Resources Supply during 2030-2050, in the context of Global Demographic Projections for 2100

Directory of Open Access Journals (Sweden)

Alexandru Bogdan

2014-08-01

Full Text Available Diversity of the Danube territorial capital is the part of World Heritage public investment - biodiversity, environmental protection, sustainable development, reducing poverty and increasing social inclusion, continued development of the global economic welfare, promote a healthy environment, conservation of bio-resources as a ―European Axis‖ , business development in the context of eco-bio-economic, diplomatic instruments promoting eco-bio-economic development, food security, public health, are only several ideas of a smart modern world, which can be attached to development philosophy type ―smart power‖ and contextual intelligence world for Sustainable Development Smart (Smart Sustainable Development by Sustainable Diplomacy Smart (Smart Sustainable Diplomacy in diversity of the Danube territorial capital, which can be a key ingredient of success for Excellence in Foreign Affairs Diplomatic and intelligence dedicated Environmental and Eco- Bio-Economy (SMART & Excellence in Environmental and Eco-Bio-Economic Affairs.

Design of high voltage power supply of miniature X-ray tube based on resonant Royer

International Nuclear Information System (INIS)

Liu Xiyao; Zeng Guoqiang; Tan Chengjun; Luo Qun; Gong Chunhui; Huang Rui

2013-01-01

Background: In recent years, X rays are widely used in various fields. With the rapid development of national economy, the demand of high quality, high reliability, and high stability miniature X-ray tube has grown rapidly. As an important core component of miniature X-ray tube, high voltage power supply has attracted wide attention. Purpose: To match miniature, the high voltage power supply should be small, lightweight, good quality, etc. Based on the basic performance requirements of existing micro-X-ray tube high voltage power supply, this paper designs an output from 0 to -30 kV adjustable miniature X-ray tube voltage DC power supply. Compared to half-bridge and full-bridge switching-mode power supply, its driving circuit is simple. With working on the linear condition, it has no switching noise. Methods: The main circuit makes use of DC power supply to provide the energy. The resonant Royer circuit supplies sine wave which drives to the high frequency transformer's primary winding with resultant sine-like high voltage appearing across the secondary winding. Then, the voltage doubling rectifying circuit would achieve further boost. In the regulator circuit, a feedback control resonant transistor base current is adopted. In order to insulate air, a silicone rubber is used for high pressure part packaging, and the output voltage is measured by the dividing voltage below -5 kV. Results: The stability of circuit is better than 0.2%/6 h and the percent of the output ripple voltage is less than 0.3%. Keeping the output voltage constant, the output current can reach 57 μA by changing the size of load resistor. This high voltage power supply based on resonant Royer can meet the requirement of miniature X-ray tube. Conclusions: The circuit can satisfy low noise, low ripple, low power and high voltage regulator power supply design. However, its efficiency is not high enough because of the linear condition. In the next design, to further reduce power consumption, we

Bio-based products from solar energy and carbon dioxide.

Science.gov (United States)

Yu, Jian

2014-01-01

Producing bio-based products directly from CO₂ and solar energy is a desirable alternative to the conventional biorefining that relies on biomass feedstocks. The production paradigm is based on an artificial photosynthetic system that converts sunlight to electricity and H₂ via water electrolysis. An autotrophic H₂-oxidizing bacterium fixes CO₂ in dark conditions. The assimilated CO₂ is stored in bacterial cells as polyhydroxybutyrate (PHB), from which a range of products can be derived. Compared with natural photosynthesis of a fast-growing cyanobacterium, the artificial photosynthetic system has much higher energy efficiency and productivity of bio-based products. The new technology looks promising because of possible cost reduction in feedstock, equipment, and operation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparing life cycle energy and GHG emissions of bio-based PET, recycled PET, PLA and man-made cellulosics

NARCIS (Netherlands)

Shen, L.; Worrell, E.; Patel, M.K.

2012-01-01

The purpose of this paper is to review the environmental profiles of petrochemical PET, (partially) bio-based PET, recycled PET, and recycled (partially) bio-based PET, and compare them with other bio-based materials, namely PLA (polylactic acid, a bio-based polyester) and man-made cellulose

Bio energy in Norway; Bioenergi i Noreg

Energy Technology Data Exchange (ETDEWEB)

Hamnaberg, Haavard; Sidelnikova, Maria

2011-07-01

The main conclusion in this report is that it is possible to make available about 14 TWh bio energy in Norway than what is used today to a charge that is located less than ca. 30 oere / kWh. Almost all this potential come from the forest and requires an increase in output up to the net sustained yield. Further 5 TWh may be available in the form of biogas at a cost that is both higher and have greater uncertainty than the fixed bio energy. It is set up a cost curve based on this work, which is quoted here. This reflects only the technical costs, and does not regard wages, commissions, taxes or fees. The value of alternative uses of biomass are not considered. The cost curve must therefore not be mixed with a supply curve. (eb)

Realisable scenarios for a future electricity supply based 100% on renewable energies

International Nuclear Information System (INIS)

Czisch, G.; Giebel, G.

2007-01-01

In view of the resource and climate problems, it seems obvious that we must transform our energy system into one using only renewable energies. But questions arise how such a system should be structured, which techniques should be used and, of course, how costly it might be. These questions were the focus of a study which investigated the cost optimum of a future renewable electricity supply for Europe and its closer Asian and African neighbourhood. The resulting scenarios are based on a broad data basis of the electricity consumption and for renewable energies. A linear optimisation determines the best system configuration and temporal dispatch of all components. The outcome of the scenarios can be considered as being a scientific breakthrough since it proves that a totally renewable electricity supply is possible even with current technology and at the same time is affordable for our national economies. In the conservative base case scenario, wind power would dominate the production spread over the better wind areas within the whole supply area, connected with the demand centres via HVDC transmission. The transmission system, furthermore, powerfully integrates the existing storage hydropower to provide for backup co-equally assisted by biomass power and supported by solar thermal electricity. The main results of the different scenarios can be summarized as follows: 1) A totally renewable electricity supply for Europe and its neighbourhood is possible and affordable. 2) Electricity import from non-European neighbour countries can be a very valuable and substantial component of a future supply. 3) Smoothing effects by the use of sources at locations in different climate zones improve the security of the supply and reduce the costs. 4) A large-scale co-operation of many different countries opens up for the possibility to combine the goals of development policy and climate politics in a multilateral win-win strategy. To aid implementation, an international extension

ASTA - A method for multi-criteria evaluation of water supply technologies to Assess the most SusTainable Alternative for Copenhagen

DEFF Research Database (Denmark)

Godskesen, Berit; Hauschild, Michael Zwicky; Albrechtsen, Hans-Jørgen

2018-01-01

these environmental, economic and social sustainability dimensions we introduce a novel multi-criteria assessment method for evaluation of water supply technologies. The method is presented and demonstrated for four alternatives for water supply based on groundwater, rain- & stormwater or seawater developed...... for augmenting Copenhagen's current groundwater based water supply. To identify the most sustainable technology, we applied rank order distribution weights to a multi-criteria decision analysis to combine the impact assessments of environment, economy and society. The three dimensions were assessed using 1) life...... weight was assigned to the environmental dimension of sustainability then the alternative of 'Rain- & stormwater harvesting' was the most sustainable water supply technology; when the highest weight was assigned to the economy or society dimensions then an alternative with 'Groundwater abstraction...

40 CFR 600.208-12 - Calculation of FTP-based and HFET-based fuel economy and carbon-related exhaust emission values...

Science.gov (United States)

2010-07-01

...-based fuel economy and carbon-related exhaust emission values for a model type. 600.208-12 Section 600... ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later...-based and HFET-based fuel economy and carbon-related exhaust emission values for a model type. (a) Fuel...

Bio-Inspired Sustainability Assessment for Building Product Development—Concept and Case Study

Directory of Open Access Journals (Sweden)

Rafael Horn

2018-01-01

Full Text Available Technological advancement culminating in a globalized economy has brought tremendous improvements for mankind in manifold respects but comes at the cost of alienation from nature. Human activities nowadays are unsustainable and cause severe damage especially in terms of global depletion and destabilization of natural systems but also harm its own social resources. In this paper, a sustainability assessment method is developed based on a bio-inspired sustainability framework that has been developed in the project TRR 141-C01 “The biomimetic promise.” It is aims at regaining the advantages of societal embeddedness in its environment through biological inspiration. The method is developed using a structured approach including requirement specification, description of the inventory models on bio-inspiration and sustainability assessment, creation of a bio-inspired sustainability assessment model and its validation. It is defined as an accompanying assessment for decision support, using a six-fold two-dimensional structure of social, economic and environmental functions and burdens. The method is applied and validated in 6 projects of TRR 141 and its applicability is exemplarily shown by the assessment of “Bio-flexi”, a biobased and biodegradable natural fiber reinforced plastic composite for indoor cladding applications. Based on the findings of the application the assessment method itself is proposed to be advanced towards an adaptive structure and a consequent outlook is provided.

Alternative strategies for electricity supply from RENEL's power plants

International Nuclear Information System (INIS)

Vladescu, A.; Popescu, M.; Breazu, F.; Valcereanu, G.; Oprea, G.; Velcescu, O.; Popovici, D.

1996-01-01

The transition to the market economy imposes the refurbishment and rehabilitation of the energy sector. This development must be based on the principles of economic efficiency having in view both the conditions of environmental protection and the energy demand and supply. This paper will describe some alternative strategies for electricity supply, taking into account the forecast of electricity demand integrated into total energy demand, as well as the environmental protection regulations. (author). 1 fig., 4 refs

A Dynamic Economy with Costly Price Adjustment

OpenAIRE

Leif Danziger

1998-01-01

This paper studies a general-equilibrium model of a dynamic economy with menu costs. Each firm's productivity is exposed to idiosyncratic and aggregate productivity shocks around a trend, and the money supply to monetary shocks around a trend. All consumption, pricing, and production decisions are based on optimizing behavior. There exists a staggered Markov perfect equilibrium with prices determined by a two-sided (s,S) markup strategy. The paper analyzes the optimal markup strategy and inve...

Natural Hazards and Supply Chain Disruptions

Science.gov (United States)

Haraguchi, M.

2016-12-01

Natural hazards distress the global economy through disruptions in supply chain networks. Moreover, despite increasing investment to infrastructure for disaster risk management, economic damages and losses caused by natural hazards are increasing. Manufacturing companies today have reduced inventories and streamlined logistics in order to maximize economic competitiveness. As a result, today's supply chains are profoundly susceptible to systemic risks, which are the risk of collapse of an entire network caused by a few node of the network. For instance, the prolonged floods in Thailand in 2011 caused supply chain disruptions in their primary industries, i.e. electronic and automotive industries, harming not only the Thai economy but also the global economy. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and the Earthquake in Kumamoto Japan in 2016. This study attempts to discover what kind of effective measures are available for private companies to manage supply chain disruptions caused by floods. It also proposes a method to estimate potential risks using a Bayesian network. The study uses a Bayesian network to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains such as logistics, multiple layers of suppliers, warehouses, and consumer markets. Considering situations across different times, our study shows desirable data requirements for the analysis and effective measures to improve Value at Risk (VaR) for private enterprises and supply chains.

Circular economy development phase research based on the IPAT equation: The case Shaanxi

Directory of Open Access Journals (Sweden)

Fang Ying

2015-04-01

Full Text Available In recent years, the worsening of the quality of the air has urged more people to attach great importance to circular economy. Shaanxi, abundant in natural resources, maintained the GDP growth rate of 14.9% during the period of the twelfth five-year plan. However, the fast economic growth under the extensive traditional economic growth mode renders Shaanxi inadequate in resources supply and noticeably worse in ecological environment issues. With the method of the IPAT equation, this paper quantitatively analyzes the developmental stage and the developmental level of the circular economy of Shaanxi to cover the shortage of the previous studies having only been focused on the policy study and the practice mode. The result shows that Shaanxi is in the intermediate stage of circular economy and the advanced stage has an apparent advantage over the intermediate one by comparing their energy consumption and solid pollutant discharge. The development experience of Shaanxi, a typical province of China, has guidance and reference significance to China and other developing countries.

Optimization in the scale of nuclear power generation and the economy of nuclear power

International Nuclear Information System (INIS)

Suzuki, Toshiharu

1983-01-01

In the not too distant future, the economy of nuclear power will have to be restudied. Various conditions and circumstances supporting this economy of nuclear power tend to change, such as the decrease in power demand and supply, the diversification in base load supply sources, etc. The fragility in the economic advantage of nuclear power may thus be revealed. In the above connection, on the basis of the future outlook of the scale of nuclear power generation, that is, the further reduction of the current nuclear power program, and of the corresponding supply and demand of nuclear fuel cycle quantities, the aspect of the economic advantage of nuclear power was examined, for the purpose of optimizing the future scale of nuclear power generation (the downward revision of the scale, the establishment of the schedule of nuclear fuel cycle the stagnation of power demand and nuclear power generation costs). (Mori, K.)

Thermoset coatings from epoxidized sucrose soyate and blocked, bio-based dicarboxylic acids.

Science.gov (United States)

Kovash, Curtiss S; Pavlacky, Erin; Selvakumar, Sermadurai; Sibi, Mukund P; Webster, Dean C

2014-08-01

A new 100% bio-based thermosetting coating system was developed from epoxidized sucrose soyate crosslinked with blocked bio-based dicarboxylic acids. A solvent-free, green method was used to block the carboxylic acid groups and render the acids miscible with the epoxy resin. The thermal reversibility of this blocking allowed for the formulation of epoxy-acid thermoset coatings that are 100% bio-based. This was possible due to the volatility of the vinyl ethers under curing conditions. These systems have good adhesion to metal substrates and perform well under chemical and physical stress. Additionally, the hardness of the coating system is dependent on the chain length of the diacid used, making it tunable. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Political Economy of the Munitions Supply Program

Science.gov (United States)

2014-05-01

advantage in production, and further identified which munitions products can be procured offshore with only limited effects on operational liabilities...comparative advantage and access to global supply chains. A few options exist: fixed-price contracts may be indexed to exogenously-given input prices and... franchisees bid their true costs.47 Third, once supply is forthcoming, the franchisee has an incentive to minimize costs unless the franchiser is known

Effects of bio-based residue amendments on greenhouse gas emission from agricultural soil are stronger than effects of soil type with different microbial community composition

NARCIS (Netherlands)

Ho, Adrian; Ijaz, Umer Z.; Janssens, Thierry K.S.; Ruijs, Rienke; Kim, Sang Yoon; de Boer, Wietse; Termorshuizen, Aad; van der Putten, Wim H.; Bodelier, Paul L.E.

2017-01-01

With the projected rise in the global human population, agriculture intensification and land-use conversion to arable fields is anticipated to meet the food and bio-energy demand to sustain a growing population. Moving towards a circular economy, agricultural intensification results in the increased

Effects of bio-based residue amendments on greenhouse gas emission from agricultural soil are stronger than effects of soil type with different microbial community composition.

NARCIS (Netherlands)

Ho, A.; Ijaz, Umer Zeeshan; Janssens, Thierry; Ruijs, Rienke; Kim, Sang Yoon; De Boer, W.; Termorshuizen, Aad J; van der Putten, W.H.; Bodelier, P.L.E.

2017-01-01

With the projected rise in the global human population, agriculture intensification and land-use conversion to arable fields is anticipated to meet the food and bio-energy demand to sustain a growing population. Moving towards a circular economy, agricultural intensification results in the increased

Effects of bio-based residue amendments on greenhouse gas emission from agricultural soil are stronger than effects of soil type with different microbial community composition

NARCIS (Netherlands)

Ho, Adrian; Ijaz, Umer Z.; Janssens, Thierry K.S.; Ruijs, Rienke; Kim, Sang Yoon; Boer, de Wietse; Termorshuizen, Aad; Putten, van der Wim H.; Bodelier, Paul L.E.

2017-01-01

With the projected rise in the global human population, agriculture intensification and land-use conversion to arable fields is anticipated to meet the food and bio-energy demand to sustain a growing population. Moving towards a circular economy, agricultural intensification results in the

BioOil presents: Free-flowing alternative to traditional biomass energy generation

Energy Technology Data Exchange (ETDEWEB)

McChesney, S.

2003-12-01

A new technology, called fast pyrolysis, is described. Fast pyrolysis is a process for converting biomass collected from agricultural and forest residues into an organic liquid fuel, called BioOil, that's easily transported, stored and handled. BioOil's principal virtue is that it can be used to generate carbon-neutral, cost-effective process heat and electricity; it also disposes of organic waste, and creates new jobs and industries. As an indication of interest in BioOil, two recent developments are cited as worthy of note: an award of $23 million for biomass research jointly by the USDA and the USDOE and a commitment of $30 million by the Government of Canada to support the development and demonstration of bio-based systems and technologies. (The Canadian investment is part of the $1 billion commitment toward implementation of the Climate Change Program for Canada). The fast pyrolysis process is carbon dioxide neutral, i.e. when biomass is converted into thermal energy, the carbon dioxide that is released is equal to the amount of carbon dioxide that went into growing the biomass. The process is particularly appealing to energy companies in areas with large forestry or agricultural potential. In Canada, DynaMotive Energy Systems Corporation is the most advanced in developing and commercializing environmentally friendly fuels produced from biomass; the company is also a world leader in fast pyrolysis technology. Ontario Power Generation is cooperating with DynaMotive on a project to produce BioOil from residue supplied by Erie Flooring and Wood Products. The 2.5 megawatt gas turbine that will combust the bio-oil and generate electricity will be supplied by the Magellan Aerospace Corporation. Beyond meeting the energy requirements of Erie Flooring and Wood Products, the project will also contribute about 1.5 megawatts of power to OPG's green energy portfolio in 2004. It is expected that the example of a commercial project of this scale, will serve

Ensuring power and raw materials supply. A challenge to politics and economy?; Sichere Energie- und Rohstoffversorgung. Herausforderung fuer Politik und Wirtschaft?

Energy Technology Data Exchange (ETDEWEB)

Bardt, H.

2008-07-01

In recent years the booming Chinese economy and the expected additional demand from India have led to a significant increase in the need for raw materials. This increase has been accompanied by rising prices for energy feedstocks and mineral resources and a reduction in the availability of certain products. At the same time, there are limits to the expansion of supply, since natural resources are essentially finite. These developments have led to a lively debate among industrialists and politicians on the strategies to be adopted to secure supplies of raw materials. Here, two steps are essential. First, production and consumption must be adapted to higher prices. Secondly, a policy must be developed to combat the protectionism currently prevalent in the international commodity markets, which is in many cases pushing up prices and reducing prosperity. (orig.)

E3: Economy, Energy and Environment

Science.gov (United States)

E3 is a technical assistance framework helping communities, manufacturers, and manufacturing supply chains adapt and thrive in today's green economy. Find information on pollution prevention, sustainable business practices, and energy efficiency.

BioPig: a Hadoop-based analytic toolkit for large-scale sequence data.

Science.gov (United States)

Nordberg, Henrik; Bhatia, Karan; Wang, Kai; Wang, Zhong

2013-12-01

The recent revolution in sequencing technologies has led to an exponential growth of sequence data. As a result, most of the current bioinformatics tools become obsolete as they fail to scale with data. To tackle this 'data deluge', here we introduce the BioPig sequence analysis toolkit as one of the solutions that scale to data and computation. We built BioPig on the Apache's Hadoop MapReduce system and the Pig data flow language. Compared with traditional serial and MPI-based algorithms, BioPig has three major advantages: first, BioPig's programmability greatly reduces development time for parallel bioinformatics applications; second, testing BioPig with up to 500 Gb sequences demonstrates that it scales automatically with size of data; and finally, BioPig can be ported without modification on many Hadoop infrastructures, as tested with Magellan system at National Energy Research Scientific Computing Center and the Amazon Elastic Compute Cloud. In summary, BioPig represents a novel program framework with the potential to greatly accelerate data-intensive bioinformatics analysis.

Environmental issues elimination through circular economy

Energy Technology Data Exchange (ETDEWEB)

Špirková, M., E-mail: marta.spirkova@stuba.sk; Pokorná, E.; Šujanová, J.; Samáková, J. [Paulínska 16, 917 24 Trnava, Slovakia, Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava (Slovakia)

2016-04-21

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

Environmental issues elimination through circular economy

International Nuclear Information System (INIS)

Špirková, M.; Pokorná, E.; Šujanová, J.; Samáková, J.

2016-01-01

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

Environmental issues elimination through circular economy

Science.gov (United States)

Špirková, M.; Pokorná, E.; Šujanová, J.; Samáková, J.

2016-04-01

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

The BioHub Knowledge Base: Ontology and Repository for Sustainable Biosourcing.

Science.gov (United States)

Read, Warren J; Demetriou, George; Nenadic, Goran; Ruddock, Noel; Stevens, Robert; Winter, Jerry

2016-06-01

The motivation for the BioHub project is to create an Integrated Knowledge Management System (IKMS) that will enable chemists to source ingredients from bio-renewables, rather than from non-sustainable sources such as fossil oil and its derivatives. The BioHubKB is the data repository of the IKMS; it employs Semantic Web technologies, especially OWL, to host data about chemical transformations, bio-renewable feedstocks, co-product streams and their chemical components. Access to this knowledge base is provided to other modules within the IKMS through a set of RESTful web services, driven by SPARQL queries to a Sesame back-end. The BioHubKB re-uses several bio-ontologies and bespoke extensions, primarily for chemical feedstocks and products, to form its knowledge organisation schema. Parts of plants form feedstocks, while various processes generate co-product streams that contain certain chemicals. Both chemicals and transformations are associated with certain qualities, which the BioHubKB also attempts to capture. Of immediate commercial and industrial importance is to estimate the cost of particular sets of chemical transformations (leading to candidate surfactants) performed in sequence, and these costs too are captured. Data are sourced from companies' internal knowledge and document stores, and from the publicly available literature. Both text analytics and manual curation play their part in populating the ontology. We describe the prototype IKMS, the BioHubKB and the services that it supports for the IKMS. The BioHubKB can be found via http://biohub.cs.manchester.ac.uk/ontology/biohub-kb.owl .

Supply chain collaboration in industrial symbiosis networks

DEFF Research Database (Denmark)

Herczeg, Gabor; Akkerman, Renzo; Hauschild, Michael Zwicky

2018-01-01

A strategy supporting the development towards a circular economy is industrial symbiosis (IS). It is a form of collaborative supply chain management aiming to make industry more sustainable and achieve collective benefits based on utilization of waste, by-products, and excess utilities between...... economically independent industries. Based on an extensive analysis of published studies on existing IS collaborations and interviews with central stakeholders of a comprehensive IS, this paper investigates IS from a supply chain collaboration perspective. A theoretical framework is built and used to discuss...... how industrial symbiosis pursues sustainability and to identify the main collaboration aspects and performance impacts. This framework is then used in the analysis of selected published cases. Based on this, we derive propositions on the organizational and operational requirements for collaboration...

An entropic framework for modeling economies

Science.gov (United States)

Caticha, Ariel; Golan, Amos

2014-08-01

We develop an information-theoretic framework for economic modeling. This framework is based on principles of entropic inference that are designed for reasoning on the basis of incomplete information. We take the point of view of an external observer who has access to limited information about broad macroscopic economic features. We view this framework as complementary to more traditional methods. The economy is modeled as a collection of agents about whom we make no assumptions of rationality (in the sense of maximizing utility or profit). States of statistical equilibrium are introduced as those macrostates that maximize entropy subject to the relevant information codified into constraints. The basic assumption is that this information refers to supply and demand and is expressed in the form of the expected values of certain quantities (such as inputs, resources, goods, production functions, utility functions and budgets). The notion of economic entropy is introduced. It provides a measure of the uniformity of the distribution of goods and resources. It captures both the welfare state of the economy as well as the characteristics of the market (say, monopolistic, concentrated or competitive). Prices, which turn out to be the Lagrange multipliers, are endogenously generated by the economy. Further studies include the equilibrium between two economies and the conditions for stability. As an example, the case of the nonlinear economy that arises from linear production and utility functions is treated in some detail.

Value Creation in the Knowledge-Based Economy

Science.gov (United States)

Liu, Fang-Chun

2013-01-01

Effective investment strategies help companies form dynamic core organizational capabilities allowing them to adapt and survive in today's rapidly changing knowledge-based economy. This dissertation investigates three valuation issues that challenge managers with respect to developing business-critical investment strategies that can have…

Technological change of the energy innovation system: From oil-based to bio-based energy

International Nuclear Information System (INIS)

Wonglimpiyarat, Jarunee

2010-01-01

This paper concerns the structural developments and the direction of technological change of the energy innovation system, based on the studies of Kuhn's model of scientific change and Schumpeter's model of technological change. The paper uses the case study of Thai government agencies for understanding the way governments can facilitate technological innovation. The analyses are based on a pre-foresight exercise to examine the potential of the bio-based energy and investigate a set of development policies necessary for the direction of energy system development. The results have shown that bio-based energy is seen as the next new wave for future businesses and one of the solutions to the problem of high oil prices to improve the world's economic security and sustainable development. (author)

Role of Food Logistics Management in a circular economy

NARCIS (Netherlands)

Bloemhof-Ruwaard, J.M.; Groot, J.J.; Snels, J.C.M.A.

2016-01-01

In this paper we will discuss the role of food logistics management in a circular economy. Specific pillars in Circular Economy such as Closed Loop supply Chain management and Industrial Ecology will be discussed. Apart from a research agenda, we will provide exemplary cases in practice showing the

Analysing the economy-wide impact of the supply chains activated by a new biomass power plant. The case of cardoon in Sardinia

Directory of Open Access Journals (Sweden)

Andrea Bonfiglio

2016-05-01

Full Text Available This study investigates the impact on the economy of Sardinia (Italy generated by a new biomass power plant fed by locally cultivated cardoon. The cardoon also serves the production of biopolymers. The impact is assessed at an economy-wide level using two multiregional closed Input-Output models, which allow us to take into account the entire supply chain activated and the supra-local effects generated by trade across local industries. The effects are computed under alternative scenarios simulating different levels of substitution of existing agricultural activities with the new activity (cardoon. Results show positive and locally significant impacts in terms of value added and employment. However, these impacts are substantially influenced by the degree of substitution. Results also suggest that there are specific territorial areas that are more sensitive to negative effects induced by substitution.

Hydrotreatment of bio-oil over Ni-based catalyst.

Science.gov (United States)

Zhang, Xinghua; Wang, Tiejun; Ma, Longlong; Zhang, Qi; Jiang, Ting

2013-01-01

Inexpensive non-sulfided Ni-based catalysts were evaluated for hydrotreatments using phenol as model compound. HZSM-5, a zeolite with different ratio of Si/Al and γ-Al(2)O(3) were impregnated with Ni(NO(3))(2) · 6H(2)O and calcined at 450 °C. Conversion rates and product distribution for treatment of phenol at 160-240 °C in the presence of catalysts with nickel loads of 6, 10, 14 and 17 wt.% were determined. Phenol conversion was highest (91.8%) at 240 °C in the presence of HZSM-5(Si/Al = 38) loaded with 10% Ni. When hydrotreatment was carried out with bio-oil obtained from pyrolysis of pine sawdust under the optimal conditions determined for phenol, the pH of bio-oil increased from 2.27 to 4.07, and the hydrogen content increased from 6.28 to 7.01 wt.%. The decrease in acidity is desirable for the use of upgraded bio-oil. Copyright © 2012. Published by Elsevier Ltd.

A techno-economic evaluation of two non-edible vegetable oil based bio diesel in Pakistan

International Nuclear Information System (INIS)

Chakrabarti, M.H.; Ali, M.

2010-01-01

Technical evaluation of Bio diesel, produced from various non-edible oils, was carried out on the basis of emission profile, torque, engine brake power and exhaust temperatures at 10% blend ratio (by volume) with mineral diesel. The performance of engine parameters showed that the castor oil based bio diesel gave the best results. Economic feasibility for bio diesel production was carried out based on available data on cultivation of necessary plants on marginal lands. This economic analysis also included the value of by-products which would be available during the chemical process for the production of bio diesel. It was found that jatropha bio diesel could be produced at a comparable cost to mineral diesel, however, castor bio diesel required substantial subsidies or mass cultivation of plants on marginal lands to enable it to compete economically with mineral diesel. (author)

Elastic Labour Supply and Home Production in a Monetary Growth Model

Directory of Open Access Journals (Sweden)

Wei-Bin Zhang

2011-10-01

Full Text Available This study constructs a monetary gender growth model with capital accumulation and endogenous labour supply. The real aspects of the model are based on the neoclassical growth theory and monetary aspects of the model are based on the cash-in-advance (CIA approach. We show that the dynamics of the economy can be described by 2-dimensional differential equations. We simulate equilibrium and motion of the economy with specified monetary policies, household preference and technology. As the monetary economic system is unstable, the economy may either experience unlimited growth or economic crisis. We also study effects of changes in some parameters on the economic equilibrium. For instance, as the woman raises her propensity to stay at home, the capital intensity is not affected, which results in that the wage rates, the rate and output level per unit of labour input are not affected. Nevertheless, the man increases his work time and the woman reduces her work time, resulting in the fall of the labour supply. The money holing, durable goods used at home and consumption level per household are reduced; also the total wealth, total capital inputs, total durable goods and total output levels are reduced.

Current challenges of research on filamentous fungi in relation to human welfare and a sustainable bio-economy: a white paper

DEFF Research Database (Denmark)

Meyer, Vera; Andersen, Mikael Rørdam; Brakhage, Axel A.

2016-01-01

The EUROFUNG network is a virtual centre of multidisciplinary expertise in the field of fungal biotechnology. The first academic-industry Think Tank was hosted by EUROFUNG to summarise the state of the art and future challenges in fungal biology and biotechnology in the coming decade. Currently...... as sources for novel compounds and as cell factories for large scale manufacture of bio-based products. This white paper reports on the discussions of the Think Tank meeting and the suggestions made for moving fungal bio(techno)logy forward....

Gasoline from biomass through refinery-friendly carbohydrate-based bio-oil produced by ketalization.

Science.gov (United States)

Batalha, Nuno; da Silva, Alessandra V; de Souza, Matheus O; da Costa, Bruna M C; Gomes, Elisa S; Silva, Thiago C; Barros, Thalita G; Gonçalves, Maria L A; Caramão, Elina B; dos Santos, Luciana R M; Almeida, Marlon B B; de Souza, Rodrigo O M A; Lam, Yiu L; Carvalho, Nakédia M F; Miranda, Leandro S M; Pereira, Marcelo M

2014-06-01

The introduction of biomass-derived compounds as an alternative feed into the refinery structure that already exists can potentially converge energy uses with ecological sustainability. Herein, we present an approach to produce a bio-oil based on carbohydrate-derived isopropylidene ketals obtained by reaction with acetone under acidic conditions directly from second-generation biomass. The obtained bio-oil showed a greater chemical inertness and miscibility with gasoil than typical bio-oil from fast pyrolysis. Catalytic upgrading of the bio-oil over zeolites (USY and Beta) yielded gasoline with a high octane number. Moreover, the co-processing of gasoil and bio-oil improved the gasoline yield and quality compared to pure gasoil and also reduced the amount of oxygenated compounds and coke compared with pure bio-oil, which demonstrates a synergistic effect. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrogen energy stations: along the roadside to the hydrogen economy

International Nuclear Information System (INIS)

Clark, W.W.; Rifkin, J.; O'Connor, T.; Swisher, J.; Lipman, T.; Rambach, G.

2005-01-01

Hydrogen has become more than an international topic of discussion within government and among industry. With the public announcements from the European Union and American governments and an Executive Order from the Governor of California, hydrogen has become a ''paradigm change'' targeted toward changing decades of economic and societal behaviours. The public demand for clean and green energy as well as being ''independent'' or not located in political or societal conflict areas, has become paramount. The key issues are the commitment of governments through public policies along with corporations. Above all, secondly, the advancement of hydrogen is regional as it depends upon infrastructure and fuel resources. Hence, the hydrogen economy, to which the hydrogen highway is the main component, will be regional and creative. New jobs, businesses and opportunities are already emerging. And finally, the costs for the hydrogen economy are critical. The debate as to hydrogen being 5 years away from being commercial and available in the marketplace versus needing more research and development contradicts the historical development and deployment of any new technology be it bio-science, flat panel displays, computers or mobile phones. The market drivers are government regulations and standards soon thereafter matched by market forces and mass production. Hydrogen is no different. What this paper does is describes is how the hydrogen highway is the backbone to the hydrogen economy by becoming, with the next five years, both regional and commercial through supplying stationary power to communities. Soon thereafter, within five to ten years, these same hydrogen stations will be serving hundreds and then thousands of hydrogen fuel powered vehicles. Hydrogen is the fuel for distributed energy generation and hence positively impacts the future of public and private power generators. The paradigm has already changed. (author)

Effect of bio-cover equipped with a novel passive air diffusion system on methane emission reduciton from landfill

DEFF Research Database (Denmark)

Lu, W.J.; Mou, Zishen

2011-01-01

Based on the aerothermodynamic principles, a kind of breathing bio-cover system was designed to enhance oxygen (O2) supply efficiency and methane (CH4) oxidation capacity. The research showed that O2 concentration (v/v) considerably increased throughout whole profiles of the microcosm (1m) equipped...... with passive air diffusion system (MPADS). When the simulated landfill gas SLFG flow was 771 and 1028 gm−3 d−1, the O2 concentration in MPADS increased gradually and tended to be stable at the atmospheric level after 10 days. The CH4 oxidation rate was 100% when the SLFG flow rate was no more than 1285 gm−3 d......−1, which also was confirmed by the mass balance calculations. The breathing bio-cover system with in situ self-oxygen supply can address the problem of O2 insufficient in conventional landfill bio-cover. The proposed system presents high potential for improving CH4 emission reduction in landfills....

Microvalve-based bioprinting - process, bio-inks and applications.

Science.gov (United States)

Ng, Wei Long; Lee, Jia Min; Yeong, Wai Yee; Win Naing, May

2017-03-28

Bioprinting is an emerging research field that has attracted tremendous attention for various applications; it offers a highly automated, advanced manufacturing platform for the fabrication of complex bioengineered constructs. Different bio-inks comprising multiple types of printable biomaterials and cells are utilized during the bioprinting process to improve the homology to native tissues and/or organs in a highly reproducible manner. This paper, presenting a first-time comprehensive yet succinct review of microvalve-based bioprinting, provides an in-depth analysis and comparison of different drop-on-demand bioprinting systems and highlights the important considerations for microvalve-based bioprinting systems. This review paper reports a detailed analysis of its printing process, bio-ink properties and cellular components on the printing outcomes. Lastly, this review highlights the significance of drop-on-demand bioprinting for various applications such as high-throughput screening, fundamental cell biology research, in situ bioprinting and fabrication of in vitro tissue constructs and also presents future directions to transform the microvalve-based bioprinting technology into imperative tools for tissue engineering and regenerative medicine.

ROMANIA AND THE KNOWLEDGE-BASED ECONOMY: INNOVATION THE SOURCE OF ECONOMIC GROWTH

OpenAIRE

Holban (Oncioiu) Ionica; Oncioiu Florin Razvan

2008-01-01

The is already a vast literature on the role of knowledge in economic growth butthere is need to clarify the meaning and scope of this term and define the Romanianperspective on the relationship between knowledge-based economy and growth. This paper focuses on innovation systems in Romania as the key challenge and meanfor embracing growth based on knowledge-based economy.

MATHEMATIC MODELING IN ANALYSIS OF BIO-GAS PURIFICATION FROM CARBON DIOXIDE

Directory of Open Access Journals (Sweden)

Y. A. Losiouk

2009-01-01

Full Text Available The paper considers a possibility to involve bio-gas generated at testing grounds of hard domestic garbage in power supply system in the Republic of Belarus. An example of optimization using mathematical modeling of plant operation which is used for bio-gas enrichment is given in the paper. 

Construction Cost Management in Resource Based Economy

OpenAIRE

Elazzazy, Muhammad

2017-01-01

Resource Based Economy tested according to criteria formulated from the construction cost management best practices. A cost management plan modeled to demonstrate the possibility of construction management under a new socio-economic system, which counts the consumed natural resources by construction as the dry cost to the environment.

Bio-based renewable additives for anti-icing applications (phase one).

Science.gov (United States)

2016-09-04

The performance and impacts of several bio-based anti-icers along with a traditional chloride-based anti-icer (salt brine) were evaluated. : A statistical design of experiments (uniform design) was employed for developing anti-icing liquids consistin...

Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility

NARCIS (Netherlands)

Oever, van den Martien; Molenveld, Karin

2017-01-01

Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of

Endogeneity of Money Supply: Evidence From Turkey

Directory of Open Access Journals (Sweden)

Oguzhan Cepni

2017-02-01

Full Text Available There is a long discussion among academics and central bankers about the theories of money supply. According to the exogenous view, central banks have the full control over money supply via policy actions including the adjustments of interest rates and reserve ratios, both of which alter commercial banks’ lending decisions. However, the theory of endogenous money supply emphasizes the role of demand for bank loans in money creation. More specifically, banks create money by meeting the demand of economic agents. In this study, we investigate which of the money supply theories holds in Turkish economy for the period 2006-2015 by employing cointegration and causality tests. Our findings show that the causality runs from bank loans to money supply both in the short and long terms, which supports the endogenous view in a sense that central bank and the banks fully meet the total demand for money in Turkish economy.

Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts

Directory of Open Access Journals (Sweden)

X. Q. Liu

2012-04-01

Full Text Available In this paper a bio-based epoxy with outstanding thermal and mechanical properties was synthesized using a rosin-based epoxy monomer and a rosin-based curing agent. The chemical structures of rosin based epoxy monomer and curing agent were confirmed by Nuclear Magnetic Resonance (NMR and Fourier Transform Infrared (FT-IR spectra. The flexural mechanical and dynamic mechanical properties as well as thermal stability of the cured epoxy were investigated. The results showed that the cured epoxy exhibited a glass transition temperature (Tg of 164°C and its flexural strength and modulus were as high as 70 and 2200 MPa, respectively. This indicated that a wholly bio-based epoxy resin possessing high performance was successfully obtained.

Fast-Responding Bio-Based Shape Memory Thermoplastic Polyurethanes.

Science.gov (United States)

Petrović, Zoran S; Milić, Jelena; Zhang, Fan; Ilavsky, Jan

2017-07-14

Novel fast response shape-memory polyurethanes were prepared from bio-based polyols, diphenyl methane diisocyanate and butane diol for the first time. The bio-based polyester polyols were synthesized from 9-hydroxynonanoic acid, a product obtained by ozonolysis of fatty acids extracted from soy oil and castor oil. The morphology of polyurethanes was investigated by synchrotron ultra-small angle X-ray scattering, which revealed the inter-domain spacing between the hard and soft phases, the degree of phase separation, and the level of intermixing between the hard and soft phases. We also conducted thorough investigations of the thermal, mechanical, and dielectric properties of the polyurethanes, and found that high crystallization rate of the soft segment gives these polyurethanes unique properties suitable for shape-memory applications, such as adjustable transition temperatures, high degree of elastic elongations, and good mechanical strength. These materials are also potentially biodegradable and biocompatible, therefore suitable for biomedical and environmental applications.

Liquid Bio fuels: Vegetable Oils and Bi oethanol

International Nuclear Information System (INIS)

Ballesteros, M.; Ballesteros, I.; Oliva, J. M.; Navarro, A. A.

1998-01-01

The European energy policy has defined clear objectives to reduce the high dependency on fossil petroleum imports, and to increase the security of sustainable energy supply for the transport sector. Moreover, the European environmental policy is requesting clean fuels that reduce environmental risks. Liquid Bio fuels (vegetable oils and bio ethanol) appear to be in a good position to contribute to achieve these goals expressed by the established objective of European Union to reach for bio fuels a market share of 5% of motor vehicle consumption. This work presents the current state and perspectives of the production and utilisation of liquid fuels from agricultural sources by reviewing agricultural feedstocks for energy sector, conversion technologies and different ways to use bio fuels. Environmental and economical aspects are also briefly analysed. (Author) 10 refs

Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio-Inspired Optimization Techniques

Science.gov (United States)

2017-11-01

on Bio -Inspired Optimization Techniques by Canh Ly, Nghia Tran, and Ozlem Kilic Approved for public release; distribution is...Research Laboratory Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques by...SUBTITLE Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques 5a. CONTRACT NUMBER

Cost And Environmental Optimization Of Waste Supply Chains Using Clca

DEFF Research Database (Denmark)

Sacchi, Romain; Wæhrens, Brian Vejrum; Prosman, Ernst Johannes

2016-01-01

Although circular supply chains are widely perceived as a huge leap towards a more environmentally friendly economy, supply chain literature lacks environmental supplier selection criteria (E-SSC) for circular supply chains. Taking into account the various characteristics of circular supply chains...

Performance Metrics in Supply Chain Management. Evidence from Romanian Economy

Directory of Open Access Journals (Sweden)

Alexandru Constăngioară

2013-02-01

Full Text Available The proposed empirical research uses a national sample of 19 Romanian companies from various industries to estimate de utilities for financial and non-financial performance measures used in Romanian supply chains. Empirical findings show that national supply chain measurement systems are balanced, using both financial and non-financial performance measures. The high estimated utility corresponding to indicators measuring logistic costs provides evidence that inter-functional and inter-organization integration in supply chains at national level are realized through operational excellence. Achieving the full potential of supply chain integration requires that management fosters both integration of operations and integration of customers.

Comparison of district heating expansion potential based on consumer-economy or socio-economy

DEFF Research Database (Denmark)

Grundahl, Lars; Nielsen, Steffen; Lund, Henrik

2016-01-01

Recent studies show that a high share of district heating is an important part of a future sustainable energy system or smart energy system with a high renewable energy penetration. These studies also show socio-economic benefits of expanding the district heating coverage. However, in order...... to implement such an expansion, district heating needs to be economically feasible for the heat consumers. This aspect is often not investigated and hence it is unknown if calculations based on consumer-economy, where tax payment is included, will yield the same potential of expansion. This study identifies...... the differences in the expansion potential of district heating calculated with a socio-economic and a consumer-economic approach, respectively, in a case study of Denmark. By also investigating the consumer-economy of expanding district heating, a deeper insight is obtained of possible locations for expanding...

Bio-robots automatic navigation with graded electric reward stimulation based on Reinforcement Learning.

Science.gov (United States)

Zhang, Chen; Sun, Chao; Gao, Liqiang; Zheng, Nenggan; Chen, Weidong; Zheng, Xiaoxiang

2013-01-01

Bio-robots based on brain computer interface (BCI) suffer from the lack of considering the characteristic of the animals in navigation. This paper proposed a new method for bio-robots' automatic navigation combining the reward generating algorithm base on Reinforcement Learning (RL) with the learning intelligence of animals together. Given the graded electrical reward, the animal e.g. the rat, intends to seek the maximum reward while exploring an unknown environment. Since the rat has excellent spatial recognition, the rat-robot and the RL algorithm can convergent to an optimal route by co-learning. This work has significant inspiration for the practical development of bio-robots' navigation with hybrid intelligence.

Development of bio-hybrid material based on Salmonella ...

African Journals Online (AJOL)

Teodoro

2016-07-13

Jul 13, 2016 ... Full Length Research Paper. Development of bio-hybrid material based on. Salmonella Typhimurium and layered double hydroxides. Slah Hidouri .... the LDH with co-precipitation synthesis method was successfully done according the study given by Hidouri et al. (2011), Abdelkader et al. (2011), Hidouri et ...

Analysing biomass torrefaction supply chain costs.

Science.gov (United States)

Svanberg, Martin; Olofsson, Ingemar; Flodén, Jonas; Nordin, Anders

2013-08-01

The objective of the present work was to develop a techno-economic system model to evaluate how logistics and production parameters affect the torrefaction supply chain costs under Swedish conditions. The model consists of four sub-models: (1) supply system, (2) a complete energy and mass balance of drying, torrefaction and densification, (3) investment and operating costs of a green field, stand-alone torrefaction pellet plant, and (4) distribution system to the gate of an end user. The results show that the torrefaction supply chain reaps significant economies of scale up to a plant size of about 150-200 kiloton dry substance per year (ktonDS/year), for which the total supply chain costs accounts to 31.8 euro per megawatt hour based on lower heating value (€/MWhLHV). Important parameters affecting total cost are amount of available biomass, biomass premium, logistics equipment, biomass moisture content, drying technology, torrefaction mass yield and torrefaction plant capital expenditures (CAPEX). Copyright © 2013 Elsevier Ltd. All rights reserved.

Emerging new services for the gas and electricity economy

International Nuclear Information System (INIS)

Matas, Ch.

2002-01-01

This article reports on a postgraduate study at the Swiss Institute of Technology (EPFL) in Lausanne, Switzerland, addressing the prospects for new energy technologies and their development, according to bankers, industry managers and international organisations. The study merges macro-economic, financial and technological views and focusses especially on electricity and natural gas including cogeneration and decentralised, small and middle-size energy production units. The world energy market is changing pace, moving from various monopolies to a dynamic system, with growing decentralisation and networking. The study reveals that constraints are changing due to the economy globalization as well as to the growing internet-based economy, and that new prospects for the development of promising energy technologies are emerging. The demand for more specific energy products like for example uninterruptible power supplies will stimulate new sectors in the energy economy. Growing environmental concern will also be an important factor for the energy market remodelling. For the gas and electricity markets, a considerable rise in sales is expected

Audits and agrarianism: The moral economy of an alternative food network

Directory of Open Access Journals (Sweden)

Liz Carlisle

2015-09-01

Full Text Available Abstract With consumers and producers seeking alternatives to corporate, industrial food, systems of provision that promise greater ecological and social sustainability have gained in popularity. As these Alternative Food Networks (AFNs scale up and go mainstream, both scholars and the general public want to know who is holding them accountable to their purported goals. In response to such questions, previously informal designations - such as organic - have become formalized, standardized, and institutionalized, and new certifications and business models promise improved traceability and transparency. I suggest, however, that successful alternative food networks - those that deliver on their promises of social and ecological sustainability – may be governed primarily by broad-based moral economies and support networks, and only secondarily by specific certification schemes or value chain quality control. Drawing on ethnographic research with a values-based supply chain on the northern Great Plains, I find that what creates incentives for sustainable practices and holds farmers accountable is less the regulatory component of certification or contractual stipulations of the value chain than the peer review aspect of belonging to the self-organized community that participates in these initiatives. While the organic certification process and values-based supply chain provide vehicles through which the moral economy of sustainable agriculture can operate, the moral economy itself precedes the notion of organic standards, dating back three generations to early twentieth century wheat pools. Since community formation and standard formation are achieved in very different ways, these findings have significant implications for policies aimed at encouraging transitions to more sustainable agricultural practices.

Production of biofuels and biomolecules in the framework of circular economy: A regional case study.

Science.gov (United States)

Jacquet, Nicolas; Haubruge, Eric; Richel, Aurore

2015-12-01

Faced to the economic and energetic context of our society, it is widely recognised that an alternative to fossil fuels and oil-based products will be needed in the nearest future. In this way, development of urban biorefinery could bring many solutions to this problem. Study of the implementation of urban biorefinery highlights two sustainable configurations that provide solutions to the Walloon context by promoting niche markets, developing circular economy and reducing transport of supply feedstock. First, autonomous urban biorefineries are proposed, which use biological waste for the production of added value molecules and/or finished products and are energetically self-sufficient. Second, integrated urban biorefineries, which benefit from an energy supply from a nearby industrial activity. In the Walloon economic context, these types of urban biorefineries could provide solutions by promoting niche markets, developing a circular economy model, optimise the transport of supply feedstock and contribute to the sustainable development. © The Author(s) 2015.

Green economy and green jobs; Vihreae talous ja vihreaet tyoet

Energy Technology Data Exchange (ETDEWEB)

Honkasalo, A.

2012-05-15

This report looks at discussions on a green economy and green jobs in international organizations such as the OECD, EU and UNEP. It also studies the structural change in the green economy in Finland and how this change will be brought forward by the year 2050 through low carbon technology and innovations. It draws special attention to how citizens' perception of risks and their development impact the approval and acceptance of climate policies and measures. Finland will continue to be a country that utilises natural resources, and where a large part of its industrial sector will be energy- and material-intensive forest, mining and basic metal industries. The following factors will have an impact on work: Energy production is mainly based on renewable energy sources such as bio-, wind and solar power. Energy and material efficiency are important targets; emissions will decrease also in work places. Repairs and wood-based building will increase; new houses will produce energy. Reuse will increase; former waste disposal sites will function as mines. Organic and GMO foodstuffs will become popular. Electric and hybrid cars will take over the markets. Environmental applications of gene- and nanotechnology will become widely used. Physical workplaces and strictly controlled working times will lose their importance; virtual offices and remote work become popular. Products will be produced to last, with renewable usage in mind, and repair and maintenance of products will become more common. Occupational health and safety issues are of paramount importance especially in bio-energy production, repair and maintenance work, as well as waste management. Especially nano- and biotechnology and hazardous chemicals require careful risk management; the precautionary principle is applied to them. Studies on a green economy and green jobs usually look very positively at the possibilities of creating new jobs through environmental policies. Employment estimates done in the past may

Recent advances on the production and utilization trends of bio-fuels: A global perspective

International Nuclear Information System (INIS)

Demirbas, M.F.; Balat, Mustafa

2006-01-01

Bio-fuels are important because they replace petroleum fuels. There are many benefits for the environment, economy and consumers in using bio-fuels. Bio-oil can be used as a substitute for fossil fuels to generate heat, power and/or chemicals. Upgrading of bio-oil to a transportation fuel is technically feasible, but needs further development. Bio-fuels are made from biomass through thermochemical processes such as pyrolysis, gasification, liquefaction and supercritical fluid extraction or biochemical. Biochemical conversion of biomass is completed through alcoholic fermentation to produce liquid fuels and anaerobic digestion or fermentation, resulting in biogas. In wood derived pyrolysis oil, specific oxygenated compounds are present in relatively large amounts. Basically, the recovery of pure compounds from the complex bio-oil is technically feasible but probably economically unattractive because of the high costs for recovery of the chemical and its low concentration in the oil

Credit policy, inflation and growth in a financially repressed economy

NARCIS (Netherlands)

van Wijnbergen, S.J.G.

1983-01-01

This paper analyzes credit policy in an open economy macro-model incorporating stylized facts about the financial sector of less developed countries. The Keynes-Wicksell growth model is applied in view of the transmission channel of monetary policy into the supply side of the economy via the cost of

Managing Service Quality within the Knowledge-Based Economy: Opportunities and Challenges

OpenAIRE

Ion Plumb; Andreea Zamfir

2009-01-01

The knowledge-based economy, along with the impact of information society technologies, presents the service organizations and their customers with many potential opportunities as well as challenges. Therefore, this study explores how the knowledge-based economy could influence the quality management of service organizations. The study reveals that the actors within the service sector have vast new opportunities in terms of communication and value co-creation, but in the same time, the requir...

Bio-based self-healing coatings based on thermo-reversible Diels-Alder reaction

NARCIS (Netherlands)

Turkenburg, D.H.; Durant, Y.; Fischer, H.R.

2017-01-01

Stimulated by the growing demand for greener and more sustainable polymer systems we have studied thermoreversible polymer networks composed largely (> 83% w/w) of diethylitaconate of bio-based origin. A series of coating materials has been synthesized consisting of linear chains of diethylitaconate

Perspectives of Biogas Conversion into Bio-CNG for Automobile Fuel in Bangladesh

Directory of Open Access Journals (Sweden)

M. S. Shah

2017-01-01

Full Text Available The need for liquid and gaseous fuel for transportation application is growing very fast. This high consumption trend causes swift exhaustion of fossil fuel reserve as well as severe environment pollution. Biogas can be converted into various renewable automobile fuels such as bio-CNG, syngas, gasoline, and liquefied biogas. However, bio-CNG, a compressed biogas with high methane content, can be a promising candidate as vehicle fuel in replacement of conventional fuel to resolve this problem. This paper presents an overview of available liquid and gaseous fuel commonly used as transportation fuel in Bangladesh. The paper also illustrates the potential of bio-CNG conversion from biogas in Bangladesh. It is estimated that, in the fiscal year 2012-2013, the country had about 7.6775 billion m3 biogas potential equivalent to 5.088 billion m3 of bio-CNG. Bio-CNG is competitive to the conventional automobile fuels in terms of its properties, economy, and emission.

Depletion policies for oil-exporting developing economies

Energy Technology Data Exchange (ETDEWEB)

Stournaras, Y A

1984-01-01

The fact that most oil-exporting countries are developing economies has important implications for oil supply which have not been properly taken into account in the literature on exhaustible resource depletion. The way in which depletion policies are affected by trade uncertainty, given the high degree of the major oil exporters' 'dependence' on crude oil revenues, by investment time lags which delay the exploitation of (some of) these countries' comparative advantage in a petroleum based development, and by ideological objections to the ideal of a rentier society and to foreign capital are examined.

13. Expert congress on future power supply. Proceedings; 13. Fachkongress Zukunftsenergien. Kongressbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

Within the 13th convention of EnergieAgentur.NRW (Duesseldorf, Federal Republic of Germany) at 10th February, 2009, in Essen (Federal Republic of Germany), the following lectures were held: (1) Future energies from North Rhine Westphalia (C. Thoben); (2) Climate change USA? American energy policy under president Barack Obama (A. Best); (3) Regenerative energy industry NRW Environment - Economy - Research (N. Allnoch); (4) Actual trends in the power plant technology (M. Neubronner); (5) Innovations and requirements at future electrical grids (C. Rehtanz); (6) Utilization of biomass in NRW (E. Uhlenberg); (7) CCS - Review of the state of the art (D. Goldschmidt); (8) CCS - EU boundary conditions (H. Bergmann); (9) CCS - Public acceptance in Germany (M. Donnermeyer); (10) CCS in Norway (A.M. Blaker); (11) Climatic protection by means of CCS - The point of view of a NRO in Norway (E. Hoff); (12) The NRW geotechnical research unit - A central laboratory for geothermal collaborative research for science and economy (R. Bracke); (13) Analysis of the value chain geothermal power in the metropolis Ruhr (B. Bruckhoff); (14) The geothermal drillings of SGG in the Bavarian Molasse basin (R. Baur); (15) Actual projects in the area of geothermal power at Stadwerke Bochum GmbH (F. Peper); (16) Geothermal projects of Evonik New Energies GmbH (A. Kany); (17) Geothermal projects of Daldrup and Soehne AG (A. Toenies); (18) Bio energy as a perspective for municipalities: Profitability, supply security and self supply of municipal real estates (U. Kreienmeier); (19) Public utilities as a partner in times of energetic change (F. Broesse); (20) Best practice bio energy: Technical transfer and financing (H. Jordan); (21) Bio energy registers for a sustainable development in European regions: Significance of regional bio energy grids as an active business development (G. Fritsch); (22) Industrial wastelands as an area perspective for cultivation of biomass: Perspectives for North Rhine

MSU-Northern Bio-Energy Center of Excellence

Energy Technology Data Exchange (ETDEWEB)

Kegel, Greg [Montana State Univ. Northern, Havre, MT (United States); Windy Boy, Jessica [Montana State Univ. Northern, Havre, MT (United States). Bio-Energy Center of Excellence; Maglinao, Randy Latayan [Montana State Univ. Northern, Havre, MT (United States). Bio-Energy Center of Excellence; Abedin, Md. Joynal [Montana State Univ. Northern, Havre, MT (United States). Bio-Energy Center of Excellence

2017-03-02

-grown oilseed crop was developed through a chemical process for converting the oil extracted into jet fuel. Promising methods of synthesizing heterogeneous metal complex catalyst that support the chemical conversion process were likewise developed. Breaking-down lignin to valuable chemicals using a metal complex catalyst was also investigated. Lignin is an organic polymer that binds around cellulose and hemicellulose fibers which strengthen cell walls in woody biomass. Test results showed promise and could lead to further exploration of using lignin for fuels and fuel additives. These findings could create another value-added product from lignin that can be sourced from beetle kill trees and product residues from cellulose ethanol plants. Coupled with these research discoveries was the provision of technical support to businesses in terms of product development and commercialization of bio-based products. This in turn opened new avenues for advancing the bio-energy industry in the region and helped support the regional agricultural-based economy through developing biofuels derived from feedstock that are grown locally. It assisted in developing biofuels that reduce exhaust emissions and improve engine performance.

CONSUMPTION-BASED ECONOMY. THE CASE OF ROMANIA IN THE LAST TWO DECADES

Directory of Open Access Journals (Sweden)

Mihai COSTEA

2016-09-01

Full Text Available Romania has entered an era of consumption and its stimulation remains one of the solutions always initiated to support the national economy, especially given that exports are declining due to euro-market problems - the main market for Romanian products.In this context, this paper aims to make a foray in time, starting with the issue of de-industrialization of Romania and subsequently with the transformation of Romanian economy into a tertiary one, accompanied by the simultaneous development of the economy based on consumption. In other words, the role of this paper is to present (using statistical data, the causes of de-industrialization of Romania, elements on the evolution of the tertiary industry, and some features and pitfalls of consumer-based economy. Also, the content of this article does not hesitate to emphasize the author's personal views about the studied phenomenon.

Understanding bio-economics

NARCIS (Netherlands)

Patel, M.K.|info:eu-repo/dai/nl/18988097X

2008-01-01

New plants for production of bio-based fuels, chemicals or plastics are being set up at an accelerating pace. However, this transition towards bio-based fuels, feedstocks and chemicals has not come without consequences. Increased demand has pushed up prices of key agricultural products such as maize

True Nature of Supply Network Communication Structure (P.1-14

Directory of Open Access Journals (Sweden)

Lokhman Hakim bin Osman

2017-02-01

Full Text Available Globalization of world economy has altered the definition of organizational structure. Global supply chain can no longer be viewed as an arm-length structure. It has become more complex. The complexity demands deeper research and understanding. This research analyzed a structure of supply network in an attempt to elucidate the true structure of the supply network. Using the quantitative Social Network Analysis methodology, findings of this study indicated that, the structure of the supply network differs depending on the types of network relations. An important implication of these findings would be a more focus resource management upon network relationship development that is based on firms’ positions in the different network structure. This research also contributes to the various strategies of effective and efficient supply chain management.Keywords: Supply Chain Management, Network Studies, Inter-Organizational Relations, Social Capital

To be, or not to be biodegradable… that is the question for the bio-based plastics

OpenAIRE

Prieto, Auxiliadora

2016-01-01

Summary Global warming, market and production capacity are being the key drivers for selecting the main players for the next decades in the market of bio?based plastics. The drop?in bio?based polymers such as the bio?based polyethylene terephtalate (PET) or polyethylene (PE), chemically identical to their petrochemical counterparts but having a component of biological origin, are in the top of the list. They are followed by new polymers such as PHA and PLA with a significant market growth rat...

Opportunities for Bio-Based Solvents Created as Petrochemical and Fuel Products Transition towards Renewable Resources.

Science.gov (United States)

Clark, James H; Farmer, Thomas J; Hunt, Andrew J; Sherwood, James

2015-07-28

The global bio-based chemical market is growing in size and importance. Bio-based solvents such as glycerol and 2-methyltetrahydrofuran are often discussed as important introductions to the conventional repertoire of solvents. However adoption of new innovations by industry is typically slow. Therefore it might be anticipated that neoteric solvent systems (e.g., ionic liquids) will remain niche, while renewable routes to historically established solvents will continue to grow in importance. This review discusses bio-based solvents from the perspective of their production, identifying suitable feedstocks, platform molecules, and relevant product streams for the sustainable manufacturing of conventional solvents.

Opportunities for Bio-Based Solvents Created as Petrochemical and Fuel Products Transition towards Renewable Resources

Science.gov (United States)

Clark, James H.; Farmer, Thomas J.; Hunt, Andrew J.; Sherwood, James

2015-01-01

The global bio-based chemical market is growing in size and importance. Bio-based solvents such as glycerol and 2-methyltetrahydrofuran are often discussed as important introductions to the conventional repertoire of solvents. However adoption of new innovations by industry is typically slow. Therefore it might be anticipated that neoteric solvent systems (e.g., ionic liquids) will remain niche, while renewable routes to historically established solvents will continue to grow in importance. This review discusses bio-based solvents from the perspective of their production, identifying suitable feedstocks, platform molecules, and relevant product streams for the sustainable manufacturing of conventional solvents. PMID:26225963

Supply and demand outlook for Japan's economic and energy up to FY2018

International Nuclear Information System (INIS)

Aoshima, Momoko; Yorita, Yasuo; Tsunoda, Miyuki

2017-01-01

Japan's economy has gradually expanded, with real GDP in the first quarter of 2017 becoming positive growth for five consecutive quarters for the first time since 2005 to 2006. Although the uncertain factors are increasing both in terms of politics and economy, the world economy is also growing moderately. As the main premises in the standard scenario, the following are supposed: (1) world economy grows moderately, with worldwide growth rate reaching 3.0% in FY2017 and 3.3% in FY2018, (2) exchange rate is about ¥115/$ in both FY2017 and FY2018 average, (3) as for nuclear power generation, cumulative restarted unit number reaches 10 basis until the end of FY2018, with average months of operation in FY2018 reaching 9 months, and with power generation amount reaching 65.6 billion kWh (7% of the power supply composition ratio), and (4) as for the supply and demand for power, the supply reserve ratio of 3% necessary for stable electric power supply can be secured nationwide. Thus, the supply and demand outlook for Japan's economic and energy up to FY2018 was made. The following various evaluation analyses were carried out: (1) macro economy, (2) production activities, (3) primary energy domestic supply, (4) final energy consumption, (5) electricity sales volume and power supply composition (electric power companies), (6) city gas sales volume (gas companies), fuel oil and LPG sales volume and crude oil throughput, and (7) in-depth analysis; demand trend of light oil, renewable energy power generation, and effects of restart of nuclear power plants. (A.O.)

Development of Bio-Based Paint by using Methyl Esters from Palm Oil for Corrosion Inhibitor

International Nuclear Information System (INIS)

Mohibah Musa; Miradatul Najwa Muhd Rodhi; Najmiddin Yaakob; Ku Halim Ku Hamid; Juferi Idris

2013-01-01

Paint is used as a means of protection to prevent surfaces from being corroded over time. This research is focused on the development of a Bio-based paint made from palm oil methyl ester (POME) which originated from crude palm oil (CPO). New formulation paint has been developed to protect the pipeline from corrosion thus reducing the cost of the operation. Bio-based paint is made up of four components which are solvent, binder, additives, and pigment. The solvent in the bio-based paint is POME. The additives used are wetting and dispersing agent. The pigment used in the bio-based paint is TiO 2 . The formulation was developed by using a constant amount of additives and binder but varying the amount of POME at 10 ml, 15 ml, 20 ml, 25 ml and 30 ml with addition of water. The Standard Testing Methods for measuring the corrosion rate (ASTM G5-94(2011)) was carried out for each sample. In conclusion, it is proven that in the making of bio-based paint formulation for better corrosion inhibitor; the best amount of binder, additives and de-foam that should be used is 20 ml, 10 ml and 10 ml, respectively. (author)

United States enrichment supply - policy and direction

International Nuclear Information System (INIS)

Voigt, W.R. Jr.; Peske, S.E.

1982-01-01

Recognizing our position as the leader in commercial enrichment services, DOE has established a flexible approach to meeting changing market realities and customer needs. The major elements of this strategy are aggressive deployment of advanced technologies, more flexible contract terms and conditions, and near-term production optimization, all of which are based on a supply strategy which carefully balances near-term requirements with long-range responsibilities. The current surplus of separative work in the world market may afford some near-term opportunities for economy. However, a secure nuclear energy system must be based on assured long-term supply availability at reasonable prices. By utilizing the flexibilities of our large production base and maintaining our demonstrated technological advantages, DOE is confident that the US will continue to be a vital and major competitor in the international nuclear fuel market. 4 figures

Human Trafficking: Fighting the Illicit Economy with the Legitimate Economy

Directory of Open Access Journals (Sweden)

Louise Shelley

2015-02-01

Full Text Available Since the beginning of research on human trafficking, there has been attention paid to the challenges surrounding the illicit economy. In creating new strategies and initiatives on combatting human trafficking, there needs to be more discussion surrounding the legitimate economy and how the business sector can make an impact in the fight against trafficking. Currently, there is a growing movement of businesses that are looking to address human trafficking through training, education, and leadership initiatives; codes of conduct; supply chain management; and financial analysis. This paper will examine the latest in these strategies and approaches by businesses in the global war against human trafficking, in addition to a discussion of a new initiative engaging the private sector co-led by Dr. Louise Shelley and Christina Bain through the World Economic Forum’s Global Agenda Council Network.

Renewable energy and macroeconomic efficiency of OECD and non-OECD economies

International Nuclear Information System (INIS)

Chien, Taichen; Hu, Jin-Li

2007-01-01

This article analyzes the effects of renewable energy on the technical efficiency of 45 economies during the 2001-2002 period through data envelopment analysis (DEA). In our DEA model, labor, capital stock, and energy consumption are the three inputs and real GDP is the single output. Increasing the use of renewable energy improves an economy's technical efficiency. Conversely, increasing the input of traditional energy decreases technical efficiency. Compared to non-OECD economies, OECD economies have higher technical efficiency and a higher share of geothermal, solar, tide, and wind fuels in renewable energy. However, non-OECD economies have a higher share of renewable energy in their total energy supply than OECD economies

How energy technology innovation affects transition of coal resource-based economy in China

International Nuclear Information System (INIS)

Guo, Pibin; Wang, Ting; Li, Dan; Zhou, Xijun

2016-01-01

The aim of this research paper is to investigate factors and mechanisms that may facilitate the transition from coal resource-based economy to sustainability. Based on the energy technology innovation theory, factors that may influence the transition of coal resource-based economy were categorized into four types, including: innovation policy, innovation input, innovation ability, and innovation organization. Hypotheses were proposed regarding the mechanisms of these factors. Data were collected from surveys administered to 314 Chinese energy firms, and a structural equation model (SEM) was employed to test the hypotheses. Ten of fifteen hypotheses were retained based on the reliability tests, validity tests, and SEM. The results show that the four proposed factors are crucial in transforming the coal resource-based economy, and the effects become statistically significant through three intermediate variables, namely, transition of energy consumption structure, correction of resource wealth investment, and improvement of transition environment. - Highlights: •Approximately, 66% of energy relies on coal in China. •Serious environment problems have occurred in many coal-based regions. •Energy technology innovation can promote the transition of coal-based economy. •China should accelerate the development of clean energy.

Isosorbide as the structural component of bio-based unsaturated polyesters for use as thermosetting resins.

Science.gov (United States)

Sadler, Joshua M; Toulan, Faye R; Nguyen, Anh-Phuong T; Kayea, Ronald V; Ziaee, Saeed; Palmese, Giuseppe R; La Scala, John J

2014-01-16

In recent years, the development of renewable bio-based resins has gained interest as potential replacements for petroleum based resins. Modified carbohydrate-based derivatives have favorable structural features such as fused bicyclic rings that offer promising candidates for the development of novel renewable polymers with improved thermomechanical properties when compared to early bio-based resins. Isosorbide is one such compound and has been utilized as the stiffness component for the synthesis of novel unsaturated polyesters (UPE) resins. Resin blends of BioUPE systems with styrene were shown to possess viscosities (120-2200 cP) amenable to a variety of liquid molding techniques, and after cure had Tgs (53-107 °C) and storage moduli (430-1650 MPa) that are in the desired range for composite materials. These investigations show that BioUPEs containing isosorbide can be tailored during synthesis of the prepolymer to meet the needs of different property profiles. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fabrication, modification and application of (BiO)_2CO_3-based photocatalysts: A review

International Nuclear Information System (INIS)

Ni, Zilin; Sun, Yanjuan; Zhang, Yuxin; Dong, Fan

2016-01-01

Graphical abstract: - Highlights: • The (BiO)_2CO_3 with Aurivillius structure y is an emergent material. • Synthesis of (BiO)_2CO_3 micro/nano structures was reviewed. • The mechanisms of (BiO)_2CO_3 based nanocomposites were discussed. • Doping (BiO)_2CO_3 with nonmetals for enhanced activity was highlighted. • Multi-functional applications of (BiO)_2CO_3 based derivatives was demonstrated. - Abstract: (BiO)_2CO_3 (BOC), a fascinating material, belongs to the Aurivillius-related oxide family with an intergrowth texture in which Bi_2O_2"2"+ layers and CO_3"2"− layers are orthogonal to each other. BOC is a suitable candidate for various fields, such as healthcare, photocatalysis, humidity sensor, nonlinear optical application and supercapacitors. Recently, the photocatalysis properties of (BiO)_2CO_3 have been gained increased attention. BOC has a wide band gap (3.1–3.5 eV), which constrains its visible light absorption and utilization. In order to enhance the visible light driven photocatalytic performance of BOC, many modification strategies have been developed. According to the discrepancies of different coupling mechanisms, six primary systems of BOC-based nanocomposites can be classified and summarized: namely, metal/BOC heterojunction, single metal oxides (metal sulfides)/BOC heterostructure, bismuth-based metallic acid salts (Bi_xMO_y)/BOC, bismuth oxyhalides (BiOX)/BOC, metal-free semiconductor/BOC and the BOC-based complex heterojunction. Doping BOC with nonmetals (C, N and oxygen vacancy) is unique strategy and warrants a separate categorization. In this review, we first give a detailed description of the strategies to fabricate various BOC micro/nano structures. Next, the mechanisms of photocatalytic activity enhancement are elaborated in three parts, including BOC-based nanocomposites, nonmetal doping and formation of oxygen vacancy. The enhanced photocatalytic activity of BOC-based systems can be attributed to the unique interaction of

An economy-wide evaluation of new power generation in South Africa: The case of Medupi and Kusile

International Nuclear Information System (INIS)

Bohlmann, Jessika; Bohlmann, Heinrich; Inglesi-Lotz, Roula; Heerden, Jan van

2016-01-01

This paper investigates the role that the building of two new power stations, Medupi and Kusile, will play in facilitating future economic activity in South Africa. We use a dynamic computable general equilibrium (CGE) model to estimate the economy-wide effects of these new power stations. Our simulation results also provide insight into how much the local economy has lost due to inadequate electricity supply in the period leading up to the construction of Medupi and Kusile. We find that the decision to build additional power generation capacity was necessary and justified, and that the failure to sooner recognise the need for expansion of the country's electricity generation capacity and subsequent delays in commissioning Medupi and Kusile, likely cost the economy over R110bn in lost production. Additional analysis, in which a further two-year delay in the construction of Medupi and Kusile is simulated, shows that such an event will cause the economy to perform below baseline projections up to 2022. - Highlights: • We analyse the impact of new electricity generation in the South African economy. • We use UPGEM, a dynamic CGE model specifically designed for the local economy. • Without new electricity generation, GDP is 3.15 per cent lower by 2019, relative to the base. • Inadequate electricity supply since 2008 has cost the South African economy R110bn. • A two-year delay in construction will result in lower GDP up to 2022.

Ultra-sensitive bio-sensor based on GMR in self-suspended-membrane-type germanium grating

International Nuclear Information System (INIS)

Ma, Jianyong; Zhang, Dawei

2012-01-01

In this paper, an ultra-sensitive bio-sensor based on the GMR effect in self-suspended-membrane-type gratings (SSGs) is proposed using multilayer plane waveguide theory. It is demonstrated from our calculations that the sensitivity of our bio-sensor is near the theoretical limit compared with a conventional GMR sensor. Based on the normalized eigenfunction of a single-layer homogeneous grating, the resonance curves with respect to different refractive indices of surrounding media are calculated, which confirm the estimated sensitivity. In addition, we design a highly sensitive bio-sensor in the near- and mid-IR wavelength region for liquid and gas detection respectively, the sensor can deliver a resolution over 1 × 10 −5 in the near-IR region in a large refractive index (1.3–1.7) range and provide better than 1 × 10 −6 in the mid-IR region, which is enough for various bio-material detections. Therefore, the bio-sensor we proposed is one or two orders more sensitive than conventional GMR sensors. (paper)

Structural Forecasts for the Danish Economy Using The Dynamic-AAGE Model

DEFF Research Database (Denmark)

Adams, Philip D; Andersen, Lill Thanning; Jacobsen, Lars Bo

2002-01-01

developed for MONASH has now been applied to Dynamic-AAGE to generate structural forecasts for the Danish economy. The starting point for the Dynamic-AAGE forecasts is a set of scenarios for the macro economy supplied by a specialist-forecasting agency, currently the Danish Economic Council. Expert...

Bio-energy status document 2012; Statusdocument bio-energie 2012

Energy Technology Data Exchange (ETDEWEB)

Bles, M.; Schepers, B.L.; Van Grinsven, A.H.; Bergsma, G.C.; Croezen, H.C.

2013-05-15

In 2012 bio-energy contributed over 71 PJ to the Dutch energy supply, a rise of almost 2 PJ over 2011. This means that 75% of the renewable energy consumed in the Netherlands is now derived from biomass. The growth is due mainly to the increase in the mandatory biotransport fuel percentage from 4.25% to 4.5%. The use of energy from 'other biomass combustion' (incl. paper sludge, green waste and chicken excrement) recovered to the level of 2010, following a marked drop in 2011 due to plant maintenance, termination of the MEP ('Environmental Quality of Power Generation') subsidy scheme and high biomass prices. At large power stations there was a considerable decrease in co-incineration of biomass because of incidents (a fire at the Nijmegen coal-fired plant) and a maintenance backlog (at the Amer power station). These are some of the results reported in the 'Bio-energy status document 2012', prepared by CE Delft for NL Agency. In addition to a review and characterisation of the current situation, the report contains an update on government policies on bio-energy and a review of the sources and sustainability of the biomass used in the Netherlands [Dutch] De bijdrage van bio-energie aan de Nederlandse energievoorziening bedroeg in 2012 ruim 71 PJ, een stijging van bijna 2 PJ ten opzichte van 2011. Daarmee is 75% van het verbruik van hernieuwbare energie in Nederland afkomstig van bio-energie. De stijging wordt vooral veroorzaakt door de oplopende bijmengplicht van biotransportbrandstoffen van 4,25% naar 4,5%. Verbruik van energie uit 'overige biomassaverbranding' (o.a. papierslib, groenafval en kippenmest) herstelde zicht tot het niveau van 2010, na een forse daling in 2011 door onderhoud aan installaties, afloop van MEP-subsidies en hoge prijzen van biomassa. Het bij- en meestoken van biomassa in grote elektriciteitscentrales daalde juist aanzienlijk door calamiteiten en uitloop van onderhoud (brand kolencentrale bij Nijmegen

WebBio, a web-based management and analysis system for patient data of biological products in hospital.

Science.gov (United States)

Lu, Ying-Hao; Kuo, Chen-Chun; Huang, Yaw-Bin

2011-08-01

We selected HTML, PHP and JavaScript as the programming languages to build "WebBio", a web-based system for patient data of biological products and used MySQL as database. WebBio is based on the PHP-MySQL suite and is run by Apache server on Linux machine. WebBio provides the functions of data management, searching function and data analysis for 20 kinds of biological products (plasma expanders, human immunoglobulin and hematological products). There are two particular features in WebBio: (1) pharmacists can rapidly find out whose patients used contaminated products for medication safety, and (2) the statistics charts for a specific product can be automatically generated to reduce pharmacist's work loading. WebBio has successfully turned traditional paper work into web-based data management.

Fueling our future: four steps to a new, reliable, cleaner, decentralized energy supply based on hydrogen and fuel cells

International Nuclear Information System (INIS)

Evers, A.A.

2004-01-01

'Full text:' This manuscript demonstrates the possible driving factors and necessary elements needed to move Hydrogen and Fuel Cells (H2/FC) to worldwide commercialisation. Focusing not only on the technology itself, we look at the 'bigger picture' explaining how certain trends have impacted the progress of new technologies developments in the past. In this process, the consumer has played and will continue to play the key and leading role. We also examine different Distributed Generation scenarios including distributed generation via fuel cells for automotive applications which may be the catalyst to the Hydrogen Economy. One possible step could be the use of Personal Power Cars equipped with Fuel Cells which not only drive on Hydrogen, but also supply (while standing) electricity /heat to residential and commercial buildings. With 1.3 billion potential customers, P.R. China is one country where such a scenario may fit. The up-and-coming Chinese H2/FC industry deals with applied fundamental research such as advances in Hydrogen production from Natural Gas, Methanol and Gasoline. The current activities in P.R. China certain to further accelerate the trend towards the coming Hydrogen Economy, together with the steps necessary to achieve a new reliable, cleaner and decentralized Energy Supply based on H2/FC are examined. (author)

Developing Exchange in Short Local Foods Supply Chains

Directory of Open Access Journals (Sweden)

Per Engelseth

2016-07-01

Full Text Available The supply chain management of foods is commonly associated with modernistic large-scale production. This involves long transport distances of foods to reach consumers. In the case of local foods, supply chains are shorter. Based on a case study of five local foods producer's supply of their products to a common retailer, the supply chain of local foods is modelled conceptually and modes of development are pointed out based on contingency theory and supply chain management literature. Findings reveal that since these chains are transparent, reciprocal interdependency is abundant mainly because human perception creates a sufficient understanding of the operations management issues pertinent within this simple inter-organisational structure. Local foods supply chains are similar to service supply chains. This includes that both are short in nature and associated with bi-directional interaction between the customer and supplier. Developing short supply chains in local foods supply is associated with improving the exchange economy found in short supply chains. This also implies that development of local foods supply is associated with two paths which may be complementary. First, the use of improved intensive technology associated with reciprocal interdependency to develop efficiencies in the bi-directional and somewhat complex interaction. Alternatively local foods suppliers may seek to reduce this form of reciprocal interdependency thereby increasing the impact of pooled interdependencies and enabling using mediating technology involving standardising interaction such as through increased standardised products and packaging as well as automation of information connectivity.

East Germany's future energy economy

Energy Technology Data Exchange (ETDEWEB)

Tjon, F; Zuehlke, R [Technische Univ. Berlin (Germany, F.R.). FG Energie und Rohstoffwirtschaft

1991-01-01

Since unification, the former German Democratic Republic has had to face major changes, one of which concerns the energy supply system. A secure energy supply system is an absolute requirement for the political and economical development of this Republic. Its former strategy of 'autarkical' energy supply until the end of 1989 was one of the factors which led to an economic downfall. This essay gives an overview of the major structural changes to the economy which have occurred since unification. First, the former energy situation is described and the status quo analyzed. Then, efforts in reorganizing the present energy supply system are outlined. Finally, new perspectives and strategies are described. The aspects taken into consideration include: energy price deregulation; European fossil fuel marketing trends; investments for the build up of an efficient energy supply system; and the creation of surcharges for environmental pollution abatement, in particular, the reduction of carbon and sulfur dioxide emissions.

Energy - vital nerve of the economy|

International Nuclear Information System (INIS)

Ebner, F.

1987-01-01

A withdrawal from nuclear energy is often demanded by the same parties who also demand full employment, better working conditions, higher salaries and increased social benefits. The demands are conflicting. It would be extremely risky for Switzerland to be forced into a supply bottle-neck. Economists should warn emphatically against such a development. The economy cannot retain its strength in international competition without a sufficient and reliable supply of electricity and with other energy at competitive prices. The employers demanded in their common declaration to the energy policy of September 24, 1986 that the necessary legal preconditions for a secure energy supply should be maintained

Refining Bio-Gas Produced from Biomass: An Alternative to Cooking Gas

Directory of Open Access Journals (Sweden)

A. S. ABDULKAREEM

2005-06-01

Full Text Available Our life is completely dependent on a reliable and adequate supply of energy. In other to reduce dependence on fossil fuels, the use of animal dung in producing a renewable alternative source of energy has been proved using cow dung. This work is aimed at produced and refined bio - gas from animal dung by reduces the H2S and CO2 content of bio - gas in other to improved the quality of the bio - gas to be used as an alternative to the petroleum based produces in use now. The sample of gas produced was passed through the gas chromatography to determine the percentage composition (mol % dry basis of the bio - gas contents. The results of the bio - gas before refinement were 54.09% mole dry CH4, 40.02mole % dry CO2 and 0.80mole % dry H2S which conformed with the literature values of 50 - 65 % mole dry CH4, 35 - 50 % mole dry CO2 and 0.1 - 1.0 % mole dry H2S. After refining, the composition of bio - gas on dry basis were 54.09% mole dry CH4, 4.01% mole dry CO2, 0.02% mole dry O2, 0.05% mole dry NH3, 0.01% mole dry H2S, 0.5% mole dry H2 and 2.54% mole dry N2. Analysis of the remnant indicated that it could be used for plant nutrient.

A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy

Directory of Open Access Journals (Sweden)

Li Xueying

2017-03-01

Full Text Available Under the background of a low carbon economy, this paper examines the impact of carbon tax policy on supply chain network emission reduction. The integer linear programming method is used to establish a supply chain network emission reduction such a model considers the cost of CO2 emissions, and analyses the impact of different carbon price on cost and carbon emissions in supply chains. The results show that the implementation of a carbon tax policy can reduce CO2 emissions in building supply chain, but the increase in carbon price does not produce a reduction effect, and may bring financial burden to the enterprise. This paper presents a reasonable carbon price range and provides decision makers with strategies towards realizing a low carbon building supply chain in an economical manner.

A bio-based fibre-reinforced plastic pedestrian bridge for Schiphol

NARCIS (Netherlands)

Smits, J.E.P.; Gkaidatzis, R.

2015-01-01

The present paper investigates Bio-based fibre-reinforced plastics, used as a load-bearing element of a bridge. We aim to increase the renewable content and decreasing the embodied energy of FRP. To achieve that, the consisting raw materials of these plastics which are based on non-renewable

Nannochloropsis algae pyrolysis with ceria-based catalysts for production of high-quality bio-oils.

Science.gov (United States)

Aysu, Tevfik; Sanna, Aimaro

2015-10-01

Pyrolysis of Nannochloropsis was carried out in a fixed-bed reactor with newly prepared ceria based catalysts. The effects of pyrolysis parameters such as temperature and catalysts on product yields were investigated. The amount of bio-char, bio-oil and gas products, as well as the compositions of the resulting bio-oils was determined. The results showed that both temperature and catalyst had significant effects on conversion of Nannochloropsis into solid, liquid and gas products. The highest bio-oil yield (23.28 wt%) and deoxygenation effect was obtained in the presence of Ni-Ce/Al2O3 as catalyst at 500°C. Ni-Ce/Al2O3 was able to retain 59% of the alga starting energy in the bio-oil, compared to only 41% in absence of catalyst. Lower content of acids and oxygen in the bio-oil, higher aliphatics (62%), combined with HHV show promise for production of high-quality bio-oil from Nannochloropsis via Ni-Ce/Al2O3 catalytic pyrolysis. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Improvement of Screening the Significant Factors of Oil Blends as Bio lubricant Base Stock

International Nuclear Information System (INIS)

Noor Hajarul Ashikin Shamsuddin; Rozaini Abdullah; Zainab Hamzah; Siti Jamilah Hanim Mohd Yusof

2015-01-01

A new formulation bio lubricant base stock was developed by blending of waste cooking oil (WCO) with Jatropha curcas oil (JCO). The objective of this research is to evaluate significant factors contributing to the production of oil blends for bio lubricant application. The significant factors used in this study were oil ratio (WCO:JCO), agitation times (min) and agitation speed (rpm). The blended oil bio based lubricant was used to determine the saponification, acid, peroxide and iodine values. The experimental design used in this study was the 2 level-factorial design. In this experiment, it was found that the effect of oil ratio and interaction of oil ratio and agitation speed gave the most significant effect in oil blends as bio lubricant base stock. The highest ratio of oil blend 80 %:20 % WCO:JCO, with low agitation speed of 300 rpm and low agitation time of 30 minutes gave the optimum results. The acid, saponification, peroxide and iodine values obtained were 0.517±0.08 mg KOH/ g, 126.23±1.62 mg/ g, 7.5±2.0 m eq/ kg and 50.42±2.85 mg/ g respectively. A higher ratio of waste cooking oil blends was found to be favourable as bio lubricant base stock. (author)

Bio-based C-3 Platform Chemical: Biotechnological Production and -Conversion of 3-Hydroxypropionaldehyde

OpenAIRE

Rezaei, Roya

2013-01-01

Demands for efficient, greener, economical and sustainable production of chemicals, materials and energy have led to development of industrial biotechnology as a key technology area to provide such products from bio-based raw materials from agricultural-, forestry- and related industrial residues and by-products. For the bio-based industry, it is essential to develop a number of building blocks or platform chemicals for C2-C6 chemicals and even aromatic chemicals. 3-hydroxypropionaldehyde (3H...

Building a knowledge based economy in Russia using guided entrepreneurship

Science.gov (United States)

Reznik, Boris N.; Daniels, Marc; Ichim, Thomas E.; Reznik, David L.

2005-06-01

Despite advanced scientific and technological (S&T) expertise, the Russian economy is presently based upon manufacturing and raw material exports. Currently, governmental incentives are attempting to leverage the existing scientific infrastructure through the concept of building a Knowledge Based Economy. However, socio-economic changes do not occur solely by decree, but by alteration of approach to the market. Here we describe the "Guided Entrepreneurship" plan, a series of steps needed for generation of an army of entrepreneurs, which initiate a chain reaction of S&T-driven growth. The situation in Russia is placed in the framework of other areas where Guided Entrepreneurship has been successful.

Condition based spare parts supply

NARCIS (Netherlands)

Lin, X.; Basten, Robertus Johannes Ida; Kranenburg, A.A.; van Houtum, Geert-Jan

2012-01-01

We consider a spare parts stock point that serves an installed base of machines. Each machine contains the same critical component, whose degradation behavior is described by a Markov process. We consider condition based spare parts supply, and show that an optimal, condition based inventory policy

Bioeconomy in Romania - Aim for an Innovative Economy?

Directory of Open Access Journals (Sweden)

Manuela Dora Orboi

2017-11-01

Full Text Available In the world, population growth phenomenon is accentuated, being estimated an increase of 30% over the next 40 years, leading to more than 9 billion people by the year 2050. In this period, mankind will face a exploitation without preceding of its natural resources, them being finite. There will be significant climate change, loss of biodiversity, increasing pressures on the environment, threatening, thus, the stability of living systems. In this context, Europe needs to change the manner of approaching to production, consumption, processing, storage, recycling and disposal of biological resources. Bioeconomy is the key element for smart growth in Europe, aspect pointed out in the Europe 2020 strategy adopted by the European Commission. This strategy is based on the Seventh Framework Program for Research and Technological Development (FP7 and the EU Framework Program for Research and Innovation (Horizon 2020. Bio-economy represents a cost savings in using the soil and sea biological resources, including the production of renewable biological resources and conversion of those resources and waste to value-added products (food, feed, bio bioenergy. Bioeconomy include sectors like agriculture, forestry, fisheries, food industry, as well as parts of chemical industry biotechnological and energetic. Bioeconomy relies on life sciences, agronomy, ecology, food science, social sciences, biotechnology, information and communication technologies and engineering. The bioeconomy support granted in the European Union offers many opportunities for Romania. Through bioeconomy specific approaches, the bioresources production potential in Romania could be exploited. Developing and implementing new solutions for better exploitation of this Romanian potential requires a significant investment in education and research. For Romania, the bioeconomy is a chance, an objective for a more innovative economy, smart, low emissions and with more sustainable use of renewable

The electricity supply industry as a subject for public criticism

International Nuclear Information System (INIS)

Bartsch, R.

1977-01-01

The German electricity supply industry is becoming the subject for more public criticism although it has supplied the whole population and industry in recent years with electricity without limitations and at a favourable price. In spite of the satisfactory and exemplary achievements of this branch of the economy a wave of criticism has built up, caused by the increase in nuclear power station construction, and this is assuming greater proportions and includes wider fields. This situation requires a matching publicity campaign in a number of directions which must be preceded by comprehensive research into causes. It is urgently necessary to achieve a realisation of the basic questions in this branch of the economy in all those, engaged in electricity supply. Full information on the special physical characteristics of the electricity produced, with all the consequences which follow from these, must be supplied to the relevant groups in society both within and outside the economy and also to the mass media, together with continuous efforts to gain the trust of the public. (orig.) [de

Creative economy and knowledge-based society. Perspectives for Romania

Directory of Open Access Journals (Sweden)

Istudor Laura Gabriela

2017-07-01

Full Text Available Creative economy is a rather new concept that started developing during the last decade, being currently applied to a variety of activities and professions. It has become an important sector of the global economy, being sustained and promoted by the European Union, especially in the context of an innovative and knowledge-based society. Within this new type of economy, creativity, innovation and knowledge management are essential factors that lead to a smart, sustainable and inclusive development in regard to the creation of new jobs and to the social inclusion requirements. According to John Howkins (2001, the creative industries / sectors include art, research, advertising, movies, theatre, software, with the possibility of the concept of creative economy to be extended to other non-artistic and IT related fields, where improvements are expected to arise through innovation and creativity. The Global Creativity Index (GCI and the European Innovation Scoreboard (EIS, are two benchmarking tools that measure the creativity and innovation degree of the countries in the European Union, placing Romania within the last positions, especially with respect to intellectual property rights and entrepreneurship. The research methodology consists of both qualitative and quantitative methods, while the research questions to be answered are What is the degree of innovation in Romania compared to other states? What can be done in order to increase the level of innovation in Romania? In this viewpoint, the paper analyzes the development of the creative industries / sectors in Romania, in the context of creative economy and innovation. The objective of the paper is to analyze the extent to which the concept of creative economy can be promoted and implemented in Romania, given its increasing importance at the international level, with countries such as the United Kingdom that already adopted strategies to sustain this kind of economy in the past years. In order to

Bio-oil Production - Process Optimization and Product Quality

DEFF Research Database (Denmark)

Hoffmann, Jessica

, fossil fuels still accounted for 87% of global and 81% of EU primary energy consumption. In an effort to reduce the carbon footprint of a continued supply of liquid fuels, processes utilizing biomass in general, and lignocellulosic biomass in particular, are being developed to replace their fossil...... such candidate is hydrothermal liquefaction (HTL), a thermochemical process that converts low-value biomass feedstocks to a high-value bio-through the use of hot compressed water and catalysts. As there is typically residual oxygen left in the bio-crude from HTL, further processing involves upgrading in order...

Bio-diesel. Initiatives, potential and prospects in Thailand. A review

International Nuclear Information System (INIS)

Siriwardhana, Manjula; Opathella, G.K.C.; Jha, M.K.

2009-01-01

Thailand experiences a great economic and industrial development and is the second largest energy consumer in South East Asia. Being a net oil importer, Thai government has declared a renewable energy development programme in order to secure sustainable development and energy security. Thailand spends more than 10% of GDP for energy imports and transport sector accounts for 36% of total final energy consumption of which 50% is diesel. Diesel marks a huge impact on Thai economy. Thai government's bio-diesel development strategy is to replace 10% of petro-diesel in transport sector by bio-diesel by 2012. The plan is to increase the use of bio-diesel from 365 million liters in 2007 to 3100 million liters by 2012. This paper reviews the current status and potential of bio-diesel in Thailand and investigates and discusses the qualities and weaknesses of the proposed road-map. The proposed road-map definitely gives immediate solution for soaring oil prices, but the long-term economic, environmental and social impacts need to be examined. (author)

THE IMPACT OF MOVING TO KNOWLEDGE BASED ECONOMY IN THE PUBLIC SECTOR

Directory of Open Access Journals (Sweden)

Mihaela PACESILA

2006-01-01

Full Text Available Global economy underwent profound changes in the last fifteen years, whichdetermined the appearance of a new economy – the knowledge economy.This economy is the result of the knowledge revolution, which gets a greaterand greater importance. Knowledge development is also very important inpublic sector. The knowledge society and its impact in public sectordevelopment is a critical area of study. The knowledge economy in publicsector requires the utilization of the knowledge in order to improve thetransparence, the services delivering to the citizens, for a bettercommunication with the citizens/users/clients and in order to improve theknowing degree of their needs. The transition to the knowledge economy inpublic sector has to take place in a decentralized, non-bureaucratic, cataliticand permissive environment, orientated to the results. In the same time, thepublic organizations must become knowledge based organizations, that havethe responsability and the flexibility to achieve the objectives publicly defined.In order to promote efficiently the development in the knowledge economy,the government must facilitate, instead of breaking, the process of economicchanges and modernizations, according as this modifications create newopportuneness and raised revenues. This must become as fast, selectiveand flexible as the economy and the society with which is mostly in contactand it must adopt the political decisions that serve the best the publicinterest.

The Collaborative Economy

DEFF Research Database (Denmark)

Avital, Michel; Andersson, Magnus; Nickerson, Jeffrey

2014-01-01

An economy based on the exchange of capital, assets and services between individuals has grown significantly, spurred by proliferation of internet-based platforms that allow people to share underutilized resources and trade with reasonably low transaction costs. The movement toward this economy...... of “sharing” translates into market efficiencies that bear new products, reframe established services, have positive environmental effects, and may generate overall economic growth. This emerging paradigm, entitled the collaborative economy, is disruptive to the conventional company-driven economic paradigm...... as evidenced by the large number of peer-to-peer based services that have captured impressive market shares sectors ranging from transportation and hospitality to banking and risk capital. The panel explores economic, social, and technological implications of the collaborative economy, how digital technologies...

On inflation in the Russian economy

Directory of Open Access Journals (Sweden)

Alexey I. Bolonin

2014-01-01

Full Text Available For the economy is very important to have the amount of money in circulation, sufficient to serve the movement of goods and services without generating inflation, indicating an excess of money, so matching the growth rate of monetary and commodity weight control is an important task of the monetary system in all countries. During the time of the gold standard and bimetallism regulation of the economy as a whole was not considered as an important macroeconomic problem. But the economic crisis of 1929 - 1933 forced to reconsider these views and problems of regulation of financial and credit sphere began to be perceived as a function of a stable level of production and employment. The article describes the monetary factors of inflation in the economy and describes the causes, which can lead to programming of monetary growth in the Russian Federation. As the first group of factors impact on the volume of money in circulation in the national economy, the author defined low value added products produced in the country, based on the external market, and the absence, so the room for maneuver of financial resources to stabilize budget revenues with a deterioration in global market conditions. The weakening of the national currency provides large ruble revenues from exports, which reduces the growth of the budget deficit. But the decline of import revenues, which can compensate for the devaluation of the national currency, leads to higher prices in the domestic market due to the prevalence it offers imported goods. The second group of factors linked to the credit activity of banks, which consists in increasing primary issue in lending importers and secondary, which occurs during the formation of foreign exchange reserves by the Bank of Russia. Result of credit activity of banks is to increase money supply growth and the discrepancy between the higher growth of money in circulation and lower growth rates actually created in the production of value added

Advanced biotechnology: metabolically engineered cells for the bio-based production of chemicals and fuels, materials, and health-care products.

Science.gov (United States)

Becker, Judith; Wittmann, Christoph

2015-03-09

Corynebacterium glutamicum, Escherichia coli, and Saccharomyces cerevisiae in particular, have become established as important industrial workhorses in biotechnology. Recent years have seen tremendous progress in their advance into tailor-made producers, driven by the upcoming demand for sustainable processes and renewable raw materials. Here, the diversity and complexity of nature is simultaneously a challenge and a benefit. Harnessing biodiversity in the right manner through synergistic progress in systems metabolic engineering and chemical synthesis promises a future innovative bio-economy. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Amendment of the Energy Economy Act. Novellierung des Energiewirtschaftsgesetzes

Energy Technology Data Exchange (ETDEWEB)

1990-12-20

The Federal Association of German Industry deliberates on the reform of the Energy Economy Act, arriving at the following intermediate result that is to be discussed by the member associations. The following might be essential points for the attitude of the industry regarding the reform of the energy economy act: deregulation, qualitative modernization, concentration on electric power and gas, differentiated regulations for power and gas, limitation of municipal influence (outside the scope of the energy economy act: reform of the municipal right of way), secure power and gas supply at internationally competitive prices. This is followed by considerations regarding the individual provisions of the energy economy act and their discussion. (orig./HSCH).

CO2 emissions in the global supply chains of services: An analysis based on a multi-regional input–output model

International Nuclear Information System (INIS)

Zhang, Wencheng; Peng, Shuijun; Sun, Chuanwang

2015-01-01

As the service sector dominates the economy in developed countries, its environmental impact has become an important issue. Based on a multi-regional input–output model, this paper estimates consumption-based emissions of service sectors of 41 countries and regions, and discusses the emission abatement policy of service sectors. The results indicate that consumption-based emissions of the service sector in most countries and regions are much greater than direct emissions generated by the service sector. Further decomposition by production sources demonstrates that final demand for services in certain countries causes substantial emissions in the other countries. In most countries, major parts of consumption-based emissions of the service sector come from upstream emissions in non-service sectors due to the intermediate consumption of non-service inputs in the service sector. For the US and China, the consumption-based emissions of their service sectors are traced back to different service consumption bundles and production sectors, which enable us to identify service categories and production sectors that play key roles in the impact of service sectors on CO 2 emissions. Finally, policy implications of the results are discussed for the climate effect of the service-oriented economy, global mitigation of climate change, sustainability, and the decarbonization of the service sector. - Highlights: • A consumption perspective for the assessment of the environmental impact of the service sector. • International supply chain effect is analyzed using a global input–output model. • Consumption-based emissions of the service sector are decomposed in two ways. • Policy implications for emissions mitigation in the service-oriented economy.

Focus 2012. Awakening into a new age - Elements of a sustainable energy supply. Ressource efficiency - key competency of sustainable societies, Sustainable chemistry - fundamental building blocks of a green economy. Annual report; Schwerpunkte 2012. Aufbruch ins neue Zeitalter - Elemente einer nachhaltigen Energieversorgung, Ressourceneffizienz - Schluesselkompetenz zukunftsfaehiger Gesellschaften, Nachhaltige Chemie - elementarer Baustein einer Green Economy. Jahrespublikation

Energy Technology Data Exchange (ETDEWEB)

Mavromati, Fotini; Ittershagen, Martin [comps.

2012-05-30

The Federal Environmental Agency (Dessau-Rosslau, Federal Republic of Germany) sees excellent opportunities to move the economic regeneration forward by means of environmental protection. Under this aspect, the annual report ''Focus 2012'' under consideration presents the following contributions: (1) Green Economy as a new model for economic development; (2) Elements of a sustainable energy supply; (3) Resource efficiency as a key competence for sustainable societies; (4) Green Chemistry as a fundamental building block of Green Economy.

Information Sharing in the Hardwood Supply Chain

OpenAIRE

Stiess, Timothy Stephen

2010-01-01

The Hardwood Industry in United States has been challenged by low-cost competition from overseas. Although cost reduction strategies have had minimal success, the proximity of industry to the domestic market has large implications on a more customer-focused strategy. The problem arises that individual companies and supply chains evolved based on the principles of economies of size and not on the flexibility to adapt to customer needs and changing resource constraints. An increased rate at ...

Second generation biofuels, an accelerator of the transition toward an economy driven by energy drawn from hydrogen

International Nuclear Information System (INIS)

Delabroy, O.

2013-01-01

The growth of the bio economy, especially in transportation, involves developing a bio-fuel industry. First generation bio-fuels were produced from plant sugars like starch or from plant oils. Second generation bio fuels use as raw materials the whole plant and especially agricultural and forestry wastes which extend the resource considerably and limit the competition between food use and fuel use. Second generation bio-fuels can be made with not only biological methods but also biomass-to-liquid processes borrowed from thermochemistry. Players in this field, including 'Air Liquide' company, are drawing up a technical and economic road-map for competitiveness in this emerging branch of industry. Since the thermochemical approach for gasifying a biomass also yields large quantities of hydrogen, the industrialization of this branch and concomitant production of bio-hydrogen at competitive prices provide leverage for accelerating the transition toward using H 2 for transportation

Feasibility study of utilizing jatropha curcas oil as bio-diesel in an oil firing burner system

Science.gov (United States)

Shaiful, A. I. M.; Jaafar, M. N. Mohd; Sahar, A. M.

2017-09-01

Jatropha oil derived from the Jatropha Curcas Linnaeus is one of the high potential plants to be use as bio-diesel. The purpose of this research is to carry out a feasibility study of using jatropha oil as bio-diesel on oil firing burner system. Like other bio-diesels, jatropha oil can also be used in any combustion engine and the performance and emissions such as NOx, SO2, CO and CO2 as well as unburned hydocarbon (UHC) from the engine will vary depending on the bio-diesel blends. The properties of Conventional Diesel Fuel (CDF) obtained will be used as baseline and the jatropha oil properties will be compared as well as other bio-diesels. From several researches, the properties of jatropha oil was found to be quite similar with other bio-diesel such as palm oil, neem, keranja and pongamia bio-diesel and complying with the ASTM standard for bio-diesel. Still, there are factors and issues concerning the use of jatropha oil such as technology, economy, legislation and resource. Plus, there several challenges to the growth of bio-diesel industry development since the world right now do not totally depend on the bio-diesel.

Development and supply of the world energy requirement

International Nuclear Information System (INIS)

Schulz, E.

1981-01-01

Recently published research reveals that the world energy requirement can and must grow more slowly than previously anticipated. In order to supply developing nations with the energy necessary for the expansion of their economies, energy saving and oil substitution assume greater significance in the industrialised countries such as the Federal Republic. Future fulfillment of the world energy requirement will be characterised by escalating costs for supply, especially for the current main energy carrier oil, on the one hand and by increased use of coal and nuclear energy as well unconventional fossils such as regenerative energies on the other. Nuclear energy and thus the electricity economy must play a key function in the future energy supply of industrial nations such as Federal Germany. Nuclear energy enables, both directly and indirectly, the substitution of oil in the heat market, supplies the process heat required for coal production and, due to the ease of storage or uranium, provides a hedge against fluctuations on the world energy market. (orig.) [de

BioPortal: An Open-Source Community-Based Ontology Repository

Science.gov (United States)

Noy, N.; NCBO Team

2011-12-01

Advances in computing power and new computational techniques have changed the way researchers approach science. In many fields, one of the most fruitful approaches has been to use semantically aware software to break down the barriers among disparate domains, systems, data sources, and technologies. Such software facilitates data aggregation, improves search, and ultimately allows the detection of new associations that were previously not detectable. Achieving these analyses requires software systems that take advantage of the semantics and that can intelligently negotiate domains and knowledge sources, identifying commonality across systems that use different and conflicting vocabularies, while understanding apparent differences that may be concealed by the use of superficially similar terms. An ontology, a semantically rich vocabulary for a domain of interest, is the cornerstone of software for bridging systems, domains, and resources. However, as ontologies become the foundation of all semantic technologies in e-science, we must develop an infrastructure for sharing ontologies, finding and evaluating them, integrating and mapping among them, and using ontologies in applications that help scientists process their data. BioPortal [1] is an open-source on-line community-based ontology repository that has been used as a critical component of semantic infrastructure in several domains, including biomedicine and bio-geochemical data. BioPortal, uses the social approaches in the Web 2.0 style to bring structure and order to the collection of biomedical ontologies. It enables users to provide and discuss a wide array of knowledge components, from submitting the ontologies themselves, to commenting on and discussing classes in the ontologies, to reviewing ontologies in the context of their own ontology-based projects, to creating mappings between overlapping ontologies and discussing and critiquing the mappings. Critically, it provides web-service access to all its

Banana peels based bio-plastic

OpenAIRE

Taodharos, Shady

2018-01-01

Every developed country depends on the industry as the main factor of its economy. Lack of exports, depression in both the general economy and the value of the currency are consequences of neglecting the industry. All countries work on increasing the efficiency of their industries by whether working on the input, the output, the cost or the time of the process. Plastic industry is considered one of the most important industries because plastic is an important factor in the making of many usef...

The National Center For Hydrogen And Fuel Cells. Jump-starting the hydrogen economy through research

International Nuclear Information System (INIS)

Stefanescu, Ioan; Varlam, Mihai; Carcadea, Elena

2010-01-01

Full text: The research, design and implementation of hydrogen-based economy must consider each of the segments of the hydrogen energy system - production, supply, storage, conversion. The National Center for Hydrogen and Fuel Cells has the experience, expertise, facilities and instrumentation necessary to have a key role in developing any aspect of hydrogen-based economy, aiming to integrate technologies for producing and using hydrogen as an 'energy vector'. This paper presents a simulation of the applied 'learning curve' concept, NCHFC being the key element of R and D in the field in comparing the costs involved. It also presents the short and medium term research program of NCHFC, the main research and development directions being specified. (authors)

Optimisation of a green gas supply chain--a review.

Science.gov (United States)

Bekkering, J; Broekhuis, A A; van Gemert, W J T

2010-01-01

In this review the knowledge status of and future research options on a green gas supply based on biogas production by co-digestion is explored. Applications and developments of the (bio)gas supply in The Netherlands have been considered, whereafter literature research has been done into the several stages from production of dairy cattle manure and biomass to green gas injection into the gas grid. An overview of a green gas supply chain has not been made before. In this study it is concluded that on installation level (micro-level) much practical knowledge is available and on macro-level knowledge about availability of biomass. But on meso-level (operations level of a green gas supply) very little research has been done until now. Future research should include the modeling of a green gas supply chain on an operations level, i.e. questions must be answered as where to build digesters based on availability of biomass. Such a model should also advise on technology of upgrading depending on scale factors. Future research might also give insight in the usability of mixing (partly upgraded) biogas with natural gas. The preconditions for mixing would depend on composition of the gas, the ratio of gases to be mixed and the requirements on the mixture.

From marine bio-corrosion to new bio-processes

International Nuclear Information System (INIS)

Bergel, A.; Dasilva, S.; Basseguy, R.; Feron, D.; Mollica, A.

2004-01-01

Full text of publication follows: From the middle of the last century it has been observed that the development of marine bio-films on the surface of stainless steels and different metallic materials induces the ennoblement of their free corrosion potential. A main step in deciphering the mechanisms of aerobic marine bio-corrosion has been achieved around 1976 with the demonstration that the potential ennoblement was due to the modification of the cathodic process. Since this date, the catalysis of oxygen reduction by marine bio-films has been the topic of numerous controversies, but it is now commonly agreed as a basic phenomena in aerobic corrosion. Several hypotheses have been proposed to explain the fine mechanisms of the bio-film-catalysed reduction of oxygen: intermediate formation of hydrogen peroxide, modification of the oxide layer on the stainless steel surface, involvement of manganese species and manganese oxidising bacteria, catalysis by proteins produced by the micro-organisms... Recent results may confirm the possible involvement of hemic enzymes or proteins. Whatever the mechanisms, very promising results have been obtained with the possible application of bio-film-catalysed oxygen reduction to conceive innovative biofuel cells with stainless steel electrodes. Actually, the catalysis of oxygen reduction is a key step that still drastically hinders the development of economically efficient hydrogen/oxygen fuel cells. The current technology requires high amounts of platinum or platinum-based materials to catalyze oxygen reduction on the cathode of these cells. The prohibitive cost of platinum is a main obstacle to the commercialization of low-cost fuel cells. Unpublished results recently showed that adapting the enzyme-catalysed reaction that was assumed for bio-corrosion on the cathode of hydrogen/oxygen fuel cells may lead to a significant decrease in the charge of platinum. Moreover, it was demonstrated on a laboratory-scale fuel cell pilot that

USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

Directory of Open Access Journals (Sweden)

A.L.V. Raubenheimer

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

Reducing Fuel Volatility. An Additional Benefit From Blending Bio-fuels?

Energy Technology Data Exchange (ETDEWEB)

Bailis, R. [Yale School of Forestry and Environmental Studies, 195 Prospect Street, New Haven, CT 06511 (United States); Koebl, B.S. [Utrecht University, Science Technology and Society, Budapestlaan 6, 3584 CD Utrecht (Netherlands); Sanders, M. [Utrecht University, Utrecht School of Economics, Janskerkhof 12, 3512 BL Utrecht (Netherlands)

2011-02-15

Oil price volatility harms economic growth. Diversifying into different fuel types can mitigate this effect by reducing volatility in fuel prices. Producing bio-fuels may thus have additional benefits in terms of avoided damage to macro-economic growth. In this study we investigate trends and patterns in the determinants of a volatility gain in order to provide an estimate of the tendency and the size of the volatility gain in the future. The accumulated avoided loss from blending gasoline with 20 percent ethanol-fuel estimated for the US economy amounts to 795 bn. USD between 2010 and 2019 with growing tendency. An amount that should be considered in cost-benefit analysis of bio-fuels.

Matching Crew Diet and Crop Food Production in BIO-Plex

Science.gov (United States)

Jones, Harry; Kwauk, Xianmin; Mead, Susan C. (Technical Monitor)

2000-01-01

This paper matches the BIO-Plex crop food production to the crew diet requirements. The expected average calorie requirement for BIO-Plex is 2,975 Calories per crewmember per day, for a randomly selected crew with a typical level of physical activity. The range of 2,550 to 3,400 Calories will cover about two-thirds of all crews. The exact calorie requirement will depend on the gender composition, individual weights, exercise, and work effort of the selected crew. The expected average crewmember calorie requirement can be met by 430 grams of carbohydrate, 100 grams of fat, and 90 grams of protein per crewmember per day, for a total of 620 grams. Some fat can replaced by carbohydrate. Each crewmember requires only 2 grams of vitamins and minerals per day. Only unusually restricted diets may lack essential nutrients. The Advanced Life Support (ALS) consensus is that BIO-Plex should grow wheat, potato, and soybean, and maybe sweet potato or peanut, and maybe lettuce and tomato. The BIO-Plex Biomass Production System food production and the external food supply must be matched to the crew diet requirement for calories and nutritional balance. The crop production and external supply specifications can each be varied as long as their sum matches the required diet specification. We have wide flexibility in choosing the crops and resupply. We can easily grow one-half the crew calories in one BIO-Plex Biomass Production Chamber (BPC) if we grow only the most productive crops (wheat, potato, and sweet potato) and it we achieve nominal crop productivity. If we assume higher productivity we can grow a wider variety of crops. If we grow one-half of the crew calories, externally supplied foods can easily provide the other half of the calories and balance the diet. We can not grow 95 percent of the crew calories in two BPCs at nominal productivity while growing a balanced diet. We produce maximum calories by growing wheat, potato, and peanut.

Emerging bio-ethanol projects in Nigeria. Their opportunities and challenges

International Nuclear Information System (INIS)

Ohimain, Elijah I.

2010-01-01

Despite being a major petroleum producing and exporting country, Nigeria has for a long time imported refined petroleum products for domestic consumption. The country has recently made an entrance into the bio-energy sector by seeding the market with imported ethanol until enough capability exists for the domestic production of ethanol. The Nigerian Biofuel Policy was released in 2007 calling for the domestic production of bio-ethanol to meet the national demand of 5.14 billion litres/year. Some investors have responded by investing over $3.86 billion for the construction of 19 ethanol bio-refineries, 10,000 units of mini-refineries and feedstock plantations for the production of over 2.66 billion litres of fuel grade ethanol per annum. Also, another 14 new projects are in the offing. Of the 20 pioneer projects, 4 are at the conception phase, 8 are in the planning phase, and 7 are under construction with only 1 operational. The potential benefits of the emerging bio-ethanol projects include investment in the economy, employment, energy security and boost rural infrastructure, while the major challenge is land take (859,561 ha). This is the first time an attempt is been made to document the emerging bio-ethanol projects in Nigeria. (author)

Focus 2012. Awakening into a new age - Elements of a sustainable energy supply. Ressource efficiency - key competency of sustainable societies, Sustainable chemistry - fundamental building blocks of a green economy. Annual report; Schwerpunkte 2012. Aufbruch ins neue Zeitalter - Elemente einer nachhaltigen Energieversorgung, Ressourceneffizienz - Schluesselkompetenz zukunftsfaehiger Gesellschaften, Nachhaltige Chemie - elementarer Baustein einer Green Economy. Jahrespublikation

Energy Technology Data Exchange (ETDEWEB)

Mavromati, Fotini; Ittershagen, Martin (comps.)

2012-05-30

The Federal Environmental Agency (Dessau-Rosslau, Federal Republic of Germany) sees excellent opportunities to move the economic regeneration forward by means of environmental protection. Under this aspect, the annual report ''Focus 2012'' under consideration presents the following contributions: (1) Green Economy as a new model for economic development; (2) Elements of a sustainable energy supply; (3) Resource efficiency as a key competence for sustainable societies; (4) Green Chemistry as a fundamental building block of Green Economy.

40 CFR 600.206-08 - Calculation and use of FTP-based and HFET-based fuel economy values for vehicle configurations.

Science.gov (United States)

2010-07-01

... EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-Procedures... economy value exists for an electric vehicle configuration, all values for that vehicle configuration are... HFET-based fuel economy values for vehicle configurations. 600.206-08 Section 600.206-08 Protection of...

Postponing aging and prolonging life expectancy with the knowledge-based economy.

Science.gov (United States)

Kristjuhan, Ulo

2012-04-01

People are interested in the aging phenomenon and hope that scientists are doing as much as they can to solve the mysteries of aging. However, this is not the case. A lot of knowledge is produced for local interests in curing specific disorders; aging is studied much less. Today's economy is undergoing a transition to a knowledge-based economy. Knowledge of aging should be integrated into the economies of contemporary societies. Aging research and intervention can ensure better health, primarily among middle-aged and older people, and prolong life. There are many reasons why postponing aging and rejuvenation research is not as widespread as it should be. Developed countries should create economic stimuli for such studies and intervention.

A Effect on Environment and Countermeasures in accordance with a Shift to a Knowledge-Based Economy

Energy Technology Data Exchange (ETDEWEB)

Jang, Ki Bok; Moon, Hyun Ju; Jeong, Hyun Keun; Kim, Tae Yol [Korea Environment Institute, Seoul (Korea)

2000-12-01

The importance of knowledge has been being more stressed now than any other time. How efficiently and effectively knowledge is created, spread, and applied is an important point to secure the competitiveness of an individual economic unit as well as to grow nation's economy. For that reason, the Government has been promoting various policies to accelerate a shift to a knowledge-based economy, establishing 'a Strategy for Knowledge-Based Economic Development', pan-governments level. Companies also have been positively accepting 'a Knowledge-Based Management' as a new strategy of managing companies. Accordingly, only knowledge-based industries, including a high technology manufacturing industry and an information/communication industry, are not sharply grow, but a knowledge-based activity in individual economic activities, such as R and D, has been expanding its share. As such a shift to a knowledge-based economy, it is expected that there are lots of effects in many-sided fields, society, culture, and politics, as well as economy. Based on due consideration to such various effects, the strategy for knowledge-based economic development and the policies on the related fields have to be promoted with a balance. An environmental field also cannot be exceptional. However, there has not yet been a concrete examination on which significance a shift to a knowledge-based economy environmentally has. The purpose of this study is to examine the effects on environment according to a shift to a knowledge-based economy and to find a countermeasure under the awareness of such problems. Anyhow, I hope that the results and the countermeasures from this study can contribute to achieving a shift to an environment-centered and knowledge-based economy. 82 refs., 30 figs., 10 tabs.

Diffraction-based BioCD biosensor for point-of-care diagnostics

Science.gov (United States)

Choi, H.; Chang, C.; Savran, C.; Nolte, D.

2018-02-01

The BioCD platform technology uses spinning-disk interferometry to detect molecular binding to target molecular probes in biological samples. Interferometric configurations have included differential phase contrast and in-line quadrature detection. For the detection of extremely low analyte concentrations, nano- or microparticles can enhance the signal through background-free diffraction detection. Diffraction signal measurements on BioCD biosensors are achieved by forming gratings on a disc surface. The grating pattern was printed with biotinylated bovine serum albumin (BSA) and streptavidin coated beads were deployed. The diameter of the beads was 1 micron and strong protein bonding occurs between BSA and streptavidin-coated beads at the printed location. The wavelength for the protein binding detection was 635 nm. The periodic pattern on the disc amplified scattered light into the first-order diffraction position. The diffracted signal contains Mie scattering and a randomly-distributed-bead noise contributions. Variation of the grating pattern periodicity modulates the diffraction efficiency. To test multiple spatial frequencies within a single scan, we designed a fan-shaped grating to perform frequency filter multiplexing on a diffraction-based BioCD.

Unexpected nitrile formation in bio-based mesoporous materials (Starbons®).

Science.gov (United States)

Attard, Jennifer; Milescu, Roxana; Budarin, Vitaliy; Matharu, Avtar S; Clark, James H

2018-01-16

The bio-based mesoporous materials made from polysaccharides, Starbons® can be modified by two different routes to give high levels of N-content, unexpectedly including significant quantities of nitrile groups which can improve the materials performance in applications including metal capture.

Contingent approach to Internet-based supply network integration

Science.gov (United States)

Ho, Jessica; Boughton, Nick; Kehoe, Dennis; Michaelides, Zenon

2001-10-01

The Internet is playing an increasingly important role in enhancing the operations of supply networks as many organizations begin to recognize the benefits of Internet- enabled supply arrangements. However, the developments and applications to-date do not extend significantly beyond the dyadic model, whereas the real advantages are to be made with the external and network models to support a coordinated and collaborative based approach. The DOMAIN research group at the University of Liverpool is currently defining new Internet- enabled approaches to enable greater collaboration across supply chains. Different e-business models and tools are focusing on different applications. Using inappropriate e- business models, tools or techniques will bring negative results instead of benefits to all the tiers in the supply network. Thus there are a number of issues to be considered before addressing Internet based supply network integration, in particular an understanding of supply chain management, the emergent business models and evaluating the effects of deploying e-business to the supply network or a particular tier. It is important to utilize a contingent approach to selecting the right e-business model to meet the specific supply chain requirements. This paper addresses the issues and provides a case study on the indirect materials supply networks.

pH measurements of FET-based (bio)chemical sensors using portable measurement system.

Science.gov (United States)

Voitsekhivska, T; Zorgiebel, F; Suthau, E; Wolter, K-J; Bock, K; Cuniberti, G

2015-01-01

In this study we demonstrate the sensing capabilities of a portable multiplex measurement system for FET-based (bio)chemical sensors with an integrated microfluidic interface. We therefore conducted pH measurements with Silicon Nanoribbon FET-based Sensors using different measurement procedures that are suitable for various applications. We have shown multiplexed measurements in aqueous medium for three different modes that are mutually specialized in fast data acquisition (constant drain current), calibration-less sensing (constant gate voltage) and in providing full information content (sweeping mode). Our system therefore allows surface charge sensing for a wide range of applications and is easily adaptable for multiplexed sensing with novel FET-based (bio)chemical sensors.

Intumescent formulations based on lignin and phosphinates for the bio-based textiles

Science.gov (United States)

Mandlekar, N.; Cayla, A.; Rault, F.; Giraud, S.; Salaün, F.; Malucelli, G.; Guan, J.

2017-10-01

This study investigates new intumescent formulations based on lignin and phosphinates to improve the flame retardant properties of Polyamide 11, while preserving the bio-based characteristics of this latter. Lignin has the advantage of being a bio-based compound and can be effectively used as carbon source for the design of intumescent systems in combination with other flame retardant additives. Metal phosphinates belong to a novel class of phosphorus flame retardants. Despite their increasing use, there is lack of scientific understanding as far as their fire retardancy mechanism is considered, especially in char forming polymeric materials. In this context, Polyamide 11 was melt blended with lignin and metal phosphinates. The possibility of melt spinning the prepared blends were assessed through melt flow index (MFI) tests; thermogravimetric (TG) analyses and cone calorimetry tests were exploited for investigating the thermal stability and the combustion behaviour of the obtained products, respectively. MFI results indicate that some formulations are suitable for melt spinning processes to generate flame retardant multifilament. Furthermore, the combination of lignin and phosphinates provides charring properties to polyamide 11. Finally, cone calorimetry data confirmed that the designed intumescent formulations could remarkably reduce PHRR through formation of protective char layer, hence slowing down the combustion process.

Identification of Mycobacterium tuberculosis BioA inhibitors by using structure-based virtual screening

Science.gov (United States)

Singh, Swati; Khare, Garima; Bahal, Ritika Kar; Ghosh, Prahlad C; Tyagi, Anil K

2018-01-01

Background 7,8-Diaminopelargonic acid synthase (BioA), an enzyme of biotin biosynthesis pathway, is a well-known promising target for anti-tubercular drug development. Methods In this study, structure-based virtual screening was employed against the active site of BioA to identify new chemical entities for BioA inhibition and top ranking compounds were evaluated for their ability to inhibit BioA enzymatic activity. Results Seven compounds inhibited BioA enzymatic activity by greater than 60% at 100 μg/mL with most potent compounds being A36, A35 and A65, displaying IC50 values of 10.48 μg/mL (28.94 μM), 33.36 μg/mL (88.16 μM) and 39.17 μg/mL (114.42 μM), respectively. Compounds A65 and A35 inhibited Mycobacterium tuberculosis (M. tuberculosis) growth with MIC90 of 20 μg/mL and 80 μg/mL, respectively, whereas compound A36 exhibited relatively weak inhibition of M. tuberculosis growth (83% inhibition at 200 μg/mL). Compound A65 emerged as the most potent compound identified in our study that inhibited BioA enzymatic activity and growth of the pathogen and possessed drug-like properties. Conclusion Our study has identified a few hit molecules against M. tuberculosis BioA that can act as potential candidates for further development of potent anti-tubercular therapeutic agents. PMID:29750019

Analysis of the Robustness of Australia Economy and Energy Supply/Demand Fluctuation

Directory of Open Access Journals (Sweden)

Aslani Alireza

2017-10-01

Full Text Available Energy has a strategic role in social and economic development of the countries. Due to the high dependency of energy supply to fossil fuels, fluctuations in prices and supply have macro/micro-economics effects for both energy exporters and importers. Therefore, understanding economic stability based on energy market changes is an important subject for policy makers and researchers. As the competitiveness of Australia products/services has high dependency on energy prices, analyzing the relationships of economics robustness with fossil fuel fluctuations is important for the policy makers and researchers. In this paper, the researchers investigate the effects of energy changes on Australian economics. In this regard, first, the impact of oil price on macro-economic parameters is discussed. After that, the main issues related to energy economics including resilience of the energy sector, energy policies, economics analysis of the energy sector, electricity markets are discussed.

Research on energy supply, demand and economy forecasting in Japan

International Nuclear Information System (INIS)

Shiba, Tsuyoshi; Kamezaki, Hiroshi; Yuyama, Tomonori; Suzuki, Atsushi

1999-10-01

This project aims to do research on forecasts of energy demand structure and electricity generation cost in each power plant in Japan in the 21st century, considering constructing successful FBR scenario. During the process of doing research on forecasts of energy demand structure in Japan, documents published from organizations in inside and outside of Japan were collected. These documents include prospects of economic growth rate, forecasts of amount for energy supply and demand, the maximum amount of introducing new energy resources, CO2 regulation, and evaluation of energy best mixture. Organizations in Japan such as Economic Council and Japan Energy Economic Research Institute have provided long-term forecasts until the early 21st century. Meanwhile, organizations overseas have provided forecasts of economic structure, and demand and supply for energy in OECD and East Asia including Japan. In connection with forecasts of electricity generation cost in each power plant, views on the ultimate reserves and cost of resources are reviewed in this report. According to some views on oil reserves, making assumptions based on reserves/production ratio, the maximum length of the time that oil reserves will last is 150 years. In addition, this report provides summaries of cost and potential role of various resources, including solar energy and wind energy; and views on waste, safety, energy security-related externality cost, and the price of transferring CO2 emission right. (author)

Energy supplies yesterday, today, and tomorrow

Energy Technology Data Exchange (ETDEWEB)

Knizia, K

1987-08-20

The article is based on a paper read in May 1987 on the following subjects: Trends on the German energy market; the risk of dependence on imported oil; coal and nuclear power; the energy situation worldwide, in Western Europe, and in the Third World; the increasing importance of electric power generation; towards a power-plus-hydrogen economy. According to the author, only coal and nuclear power combined will be able to assure energy supply on a long-term basis and to make Germany independent of the unstable world energy market. (MOS).

Labor supply of engineers and scientists for nuclear electric utilities, 1987-1992

International Nuclear Information System (INIS)

Blair, L.M.

1988-01-01

An assessment of the adequacy of the supply of health physicists, nuclear engineers, and other engineers for the nuclear electric utility industry is based on job openings for scientists and engineers in broader nuclear-power-related fields, which include engineering and design, manufacturing, fabrication, supporting services, and government. In assessing the likely adequacy of labor supplies for commercial nuclear power job openings over the next 5 yr, consideration has been given to competing sources of labor demands, including nuclear energy research and development activities, nuclear defense, and the total US economy, and to the likely supply of new graduates. In particular, over the last 3 yr, the number of degrees awarded and enrollments in nuclear engineering programs have declined 12 and 14%, respectively, and in health physics programs, 5 and 14%, respectively. For health physics and nuclear engineers, tight labor market conditions (i.e. labor supplies and demand balanced at relatively high salaries) are expected over the next 5 yr because of declining enrollments and slowly growing employment levels plus job replacement needs. The commercial nuclear power field is expected to face tight labor markets for electrical and materials engineers because of strong competing demands in the economy. Other engineering occupations are likely to have adequate supplies for the nuclear power field but at salaries that continue to be relatively higher than salaries for other professional occupations

Bio-based materials with novel characteristics for tissue engineering applications - A review.

Science.gov (United States)

Bedian, Luis; Villalba-Rodríguez, Angel M; Hernández-Vargas, Gustavo; Parra-Saldivar, Roberto; Iqbal, Hafiz M N

2017-05-01

Recently, a wider spectrum of bio-based materials and materials-based novel constructs and systems has been engineered with high interests. The key objective is to help for an enhanced/better quality of life in a secure way by avoiding/limiting various adverse effects of some in practice traditional therapies. In this context, different methodological approaches including in vitro, in vivo, and ex vivo techniques have been exploited, so far. Among them, bio-based therapeutic constructs are of supreme interests for an enhanced and efficient delivery in the current biomedical sector of the modern world. The development of new types of novel, effective and highly reliable materials-based novel constructs for multipurpose applications is essential and a core demand to tackle many human health related diseases. Bio-based materials possess several complementary functionalities, e.g. unique chemical structure, bioactivity, non-toxicity, biocompatibility, biodegradability, recyclability, etc. that position them well in the modern world's materials sector. In this context, the utilization of biomaterials provides extensive opportunities for experimentation in the field of interdisciplinary and multidisciplinary scientific research. With an aim to address the global dependence on petroleum-based polymers, researchers have been redirecting their interests to the engineering of biological materials for targeted applications in different industries including cosmetics, pharmaceuticals, and other biotechnological or biomedical applications. Herein, we reviewed biotechnological advancements at large and tissue engineering from a biomaterials perspective in particular and envision directions of future developments. Copyright © 2017 Elsevier B.V. All rights reserved.

Supply chains in global production

Directory of Open Access Journals (Sweden)

Anatolii Mazaraki

2017-10-01

Full Text Available Introduction. Analyzing the current processes of global sales and sales interaction over the past two decades shows that the world’s system of exchanges has undergone significant changes that have been caused by a multitude of factors. The formation of a complex model of global production, determined by the peculiarities of the transformation of individual economies’ growth models, the specifics of their industrialization and the forms of development of their national production business, its institutional and market-wise restructuring and the degree of inclusion in the system of international division of labor. The change in the level and depth of the specialization of individual countries in the field of production and sale of products, in turn, has accelerated the overcoming of economic distance (which is measured by the cost of transport and information services. Based on the above, namely, within the framework of forming a new model of global production, the issue of studying the role and value of supply chains in this model is made relevant. Aim and tasks. The purpose of the article is to study the modern transformation of supply chains within the global production system. The findings will allow to determine what exactly needs to be done in the direction of further redeveloping the regulatory tools of global supply chain management. Research results. The article presents the results of studying the transformation of supply chains’ role in global production. It is determined that taking into account the existing specificity of industrialization and fragmentation of national production, as well as the rapid spread of the results of scientific and technological progress in the world economy, there is a need for a more thorough study of this change. As a result of analyzing open source statistical data, a conclusion was reached regarding the transition from the competition of individual business entities to the competition of global

Quality-Based Supply Management Indicators

Science.gov (United States)

1993-09-01

years, "numbers" has been the bugaboo . It is much easier for a base with a high density fleet to compete based on numbers. This effectively eliminates all...supply guys could offer discount bargains to try and recoup some of the dollars invested . Any monies gained is better than none or incurring

Microdrive- A research program on sustainable bio-ethanol and biogas systems

International Nuclear Information System (INIS)

Schnurer, J.; Schnurer, A.

2009-01-01

Microdrive Microbially Derived Energy is a thematic research program on sustainable bio fuel production at the Faculty for Natural Resources and Agriculture (NL), Swedish University of Agricultural Sciences (SLU). The program has the following long term goals: To maximise the energy yield of ethanol and biogas processes, improve overall process economy through development of novel co-products, and to minimise environmental impact. (Author)

Circular economy and nuclear energy

International Nuclear Information System (INIS)

2017-01-01

This article first recalls what circular economy is, and its main principles (sustainable supply, eco-design, industrial and territorial ecology, economy of function rather than of possession, extension of product lifetime, recycling). It outlines its different benefits: improved resilience, inclusion of all actors of the territory, creation of local jobs, a global vision. In the next part, the nuclear industry is presented as a pioneer in this respect through various trends and developments: closure of the fuel cycle and saving of uranium and energy in the upstream part, reduction of wastes in the downstream part, exploitation of plants on a longer term, management of the production of conventional wastes, reduction of energy consumption, evolution of the doctrine in terms of management of very low level radioactive wastes

Directed influence on anaerobic energy supply systems of qualified free style wrestlers

Directory of Open Access Journals (Sweden)

M.G. Sybil

2015-07-01

Full Text Available Purpose: to experimentally prove effectiveness of directed influence on anaerobic energy supply systems of free style wrestlers, considering individual characteristics of their bio energetic. Material: in this article the data of laboratory bicycle stress test «Vita maxima» and results of special control testing have been presented. 40 sportsmen participated in the experiment. Results: individual characteristics of dominating type of anaerobic energy supply have been determined. Statistically confident difference between development of lactate and a-lactate anaerobic energetic components were found. By the data of bio-chemical indicators’ changes the authors observed increase of adenosine triphosphate (glycolytic or creatine-phosphate in some, weaker developed mechanisms of anaerobic re-synthesis. Ways of influence on anaerobic energy supply systems, considering individual characteristics of dominating of different components (lactate or a-lactate have been found. Conclusions: it is recommended to take in consideration individual dominating type of energy supply.

Applying distance-to-target weighing methodology to evaluate the environmental performance of bio-based energy, fuels, and materials

International Nuclear Information System (INIS)

Weiss, Martin; Patel, Martin; Heilmeier, Hermann; Bringezu, Stefan

2007-01-01

The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a

An analysis of China's coal supply and its impact on China's future economic growth

International Nuclear Information System (INIS)

Wang, Jianliang; Feng, Lianyong; Tverberg, Gail E.

2013-01-01

Many people believe that China's economic growth can continue almost indefinitely. For a manufacturing-based economy such as China's to continue to grow, it needs an adequate supply of inexpensive energy. To date, this energy growth has primarily come from coal, but China's indigenous coal supplies are now falling short of the amount needed to support this growth. In this situation, the status of China's future coal supply will be very important for China's future economic development. Our analysis shows that China's ultimate recoverable coal reserves equal 223.6×10 9 MT, and its production will peak between 2025 and 2030, with peak production of approximately 3.9×10 9 MT. The extent to which China can import coal in the future is uncertain. With rising coal demand, this combination is likely to create a significant challenge to China's future economic development. - Highlights: ► We analyze an issue of prime importance for the future of China's economy. ► The decline in coal supply will present a challenge to China's economic growth. ► Rising coal price will also have an adverse impact on economic growth

Major economies Forum on energy and climate

International Nuclear Information System (INIS)

2009-01-01

The Major Economies Forum is intended to facilitate an open dialogue among major developed and developing economies, help generate the political leadership necessary to achieve a successful outcome at the United Nations climatic change conference in Copenhagen, and advance the exploration of concrete initiatives and joint ventures that increase the supply of clean energy while cutting greenhouse gas emissions. The Forum's second preparatory meeting was held in Paris in May 2009, mainly focused on greenhouse gas emissions reduction actions and objectives, the diffusion of clean technologies, the financing of activities for climate protection and adaptation to climatic change impacts

Consideration of consumer installation fees upon termination of concession contracts in the gas economy

International Nuclear Information System (INIS)

Schumacher, K.S.

1995-01-01

At the Fourth Conference of the Forum Institute on 18 and 19 January 1995 there was a motion to grant the electricity supply an exceptional status in takeover price negotiations in order to do justice to the cost-price coupling prescribed in that sector. This was intended to legitimatise the abandonment of all managerial, market-oriented methods of calculating the actual value of an electricity network. These ideas met with well-founded opposition of the same conference. In the gas economy cost-price coupling is less rigid because here price formation is largely determined by substitution competition with other energy carriers (mineral oil, district heating, electricity). In view of these circumstances the present article deals exclusively with the termination of gas concession contracts. Because of the affinity of Articles 9 and 10 of the General Terms of the Gas Supply to Article 9 and 10 of the General Terms of the Electricity Supply some of the thoughts presented here also apply to the electricity supply. However, the results found here for the gas economy cannot be transferred to the electricity economy without modification. (orig.) [de

Analysis of Structural Differences and Asymmetry of Shocks Between the Czech Economy and the Euro Area

Directory of Open Access Journals (Sweden)

Martin Slanicay

2016-03-01

Full Text Available The goal of this paper is to examine asymmetry of shocks and structural differences between the Czech economy and the euro area. For this purpose I use a New Keynesian DSGE model of two economies. Structural differences are examined using the posterior distributions of structural parameters. Results suggest that prices are more sticky in the Czech economy, especially in the non-tradable sector, while wages are more sticky in the euro area. It seems that the ECB smooths less the interest rate and reacts more to the development in output and inflation than the Czech National Bank. It also seems that labor supply in the Czech economy is more elastic than labor supply in the euro area. Asymmetry of shocks is examined using correlations between smoothed shocks obtained from the estimation. The most asymmetric shocks are shocks in government expenditures, labor supply shocks, and productivity shocks in the tradable sector, while the most symmetric shocks are consumption preference shocks, monetary policy shocks, and investment efficiency shocks.

Cross-Linked Amylose Bio-Plastic: A Transgenic-Based Compostable Plastic Alternative

Directory of Open Access Journals (Sweden)

Domenico Sagnelli

2017-09-01

Full Text Available Bio-plastics and bio-materials are composed of natural or biomass derived polymers, offering solutions to solve immediate environmental issues. Polysaccharide-based bio-plastics represent important alternatives to conventional plastic because of their intrinsic biodegradable nature. Amylose-only (AO, an engineered barley starch with 99% amylose, was tested to produce cross-linked all-natural bioplastic using normal barley starch as a control. Glycerol was used as plasticizer and citrate cross-linking was used to improve the mechanical properties of cross-linked AO starch extrudates. Extrusion converted the control starch from A-type to Vh- and B-type crystals, showing a complete melting of the starch crystals in the raw starch granules. The cross-linked AO and control starch specimens displayed an additional wide-angle diffraction reflection. Phospholipids complexed with Vh-type single helices constituted an integrated part of the AO starch specimens. Gas permeability tests of selected starch-based prototypes demonstrated properties comparable to that of commercial Mater-Bi© plastic. The cross-linked AO prototypes had composting characteristics not different from the control, indicating that the modified starch behaves the same as normal starch. The data shows the feasibility of producing all-natural bioplastic using designer starch as raw material.

Cross-Linked Amylose Bio-Plastic: A Transgenic-Based Compostable Plastic Alternative

Science.gov (United States)

Sagnelli, Domenico; Kemmer, Gerdi Christine; Holse, Mette; Hebelstrup, Kim H.; Bao, Jinsong; Stelte, Wolfgang; Bjerre, Anne-Belinda; Blennow, Andreas

2017-01-01

Bio-plastics and bio-materials are composed of natural or biomass derived polymers, offering solutions to solve immediate environmental issues. Polysaccharide-based bio-plastics represent important alternatives to conventional plastic because of their intrinsic biodegradable nature. Amylose-only (AO), an engineered barley starch with 99% amylose, was tested to produce cross-linked all-natural bioplastic using normal barley starch as a control. Glycerol was used as plasticizer and citrate cross-linking was used to improve the mechanical properties of cross-linked AO starch extrudates. Extrusion converted the control starch from A-type to Vh- and B-type crystals, showing a complete melting of the starch crystals in the raw starch granules. The cross-linked AO and control starch specimens displayed an additional wide-angle diffraction reflection. Phospholipids complexed with Vh-type single helices constituted an integrated part of the AO starch specimens. Gas permeability tests of selected starch-based prototypes demonstrated properties comparable to that of commercial Mater-Bi© plastic. The cross-linked AO prototypes had composting characteristics not different from the control, indicating that the modified starch behaves the same as normal starch. The data shows the feasibility of producing all-natural bioplastic using designer starch as raw material. PMID:28973963

Cross-Linked Amylose Bio-Plastic: A Transgenic-Based Compostable Plastic Alternative.

Science.gov (United States)

Sagnelli, Domenico; Hooshmand, Kourosh; Kemmer, Gerdi Christine; Kirkensgaard, Jacob J K; Mortensen, Kell; Giosafatto, Concetta Valeria L; Holse, Mette; Hebelstrup, Kim H; Bao, Jinsong; Stelte, Wolfgang; Bjerre, Anne-Belinda; Blennow, Andreas

2017-09-30

Bio-plastics and bio-materials are composed of natural or biomass derived polymers, offering solutions to solve immediate environmental issues. Polysaccharide-based bio-plastics represent important alternatives to conventional plastic because of their intrinsic biodegradable nature. Amylose-only (AO), an engineered barley starch with 99% amylose, was tested to produce cross-linked all-natural bioplastic using normal barley starch as a control. Glycerol was used as plasticizer and citrate cross-linking was used to improve the mechanical properties of cross-linked AO starch extrudates. Extrusion converted the control starch from A-type to Vh- and B-type crystals, showing a complete melting of the starch crystals in the raw starch granules. The cross-linked AO and control starch specimens displayed an additional wide-angle diffraction reflection. Phospholipids complexed with Vh-type single helices constituted an integrated part of the AO starch specimens. Gas permeability tests of selected starch-based prototypes demonstrated properties comparable to that of commercial Mater-Bi © plastic. The cross-linked AO prototypes had composting characteristics not different from the control, indicating that the modified starch behaves the same as normal starch. The data shows the feasibility of producing all-natural bioplastic using designer starch as raw material.

The Energy & Raw Materials Factory: Role and Potential Contribution to the Circular Economy of the Netherlands.

Science.gov (United States)

van Leeuwen, Kees; de Vries, Eli; Koop, Stef; Roest, Kees

2018-05-01

Water is an abundant resource worldwide, but fresh and clean water is scarce in many areas of the world. Increases in water consumption and climate change will affect global water security even further in the near future. With increasing numbers of people living in metropolitan areas, water, energy, and materials need to be used carefully, reused and renewed. Resource scarcity is the driver behind the circular economy. The recovery of materials and energy can add significant new value streams and improve cost recovery and water quality. In this paper, we present the creation of the Energy & Raw Materials Factory (ERMF) of the Dutch Water Authorities, also known as the Resource Factory, as one of the solutions to this global challenge of water in the circular economy. Resources like cellulose, bioplastics, phosphate, alginate-like exopolymers from aerobic granular sludge (bio-ALE), and biomass can be recovered. Bio-ALE is an alginate-like polymer of sugars and proteins and can be used in agriculture and horticulture, the paper industry, medical, and construction industries. The ERMF demands significant investments but the return on investment is high both from a financial and environmental perspective, provided that markets can be realized. Experiences in the Netherlands show that the concept of the ERMF is viable and adds to the creation of a circular economy. Achieving climate neutrality and production of new and promising resources like bio-ALE are possible. The ERMF can contribute to the sustainable development goals (SDGs) of the United Nations on water and sanitation, once fully operational.

Bio energy: Bio fuel - Properties and Production

International Nuclear Information System (INIS)

Wilhelmsen, Gunnar; Martinsen, Arnold Kyrre; Sandberg, Eiliv; Fladset, Per Olav; Kjerschow, Einar; Teslo, Einar

2001-01-01

This is Chapter 3 of the book ''Bio energy - Environment, technique and market''. Its main sections are: (1) Definitions and properties, (2) Bio fuel from the forest, (3) Processed bio fuel - briquettes, pellets and powder, (4) Bio fuel from agriculture, (5) Bio fuel from agro industry, (6) Bio fuel from lakes and sea, (7) Bio fuel from aquaculture, (8) Bio fuel from wastes and (9) Hydrogen as a fuel. The exposition largely describes the conditions in Norway. The chapter on energy from the forest includes products from the timber and sawmill industry, the pulp and paper industry, furniture factories etc. Among agricultural sources are straw, energy forests, vegetable oil, bio ethanol, manure

Bio based cogeneration plants in Sweden; Biobaserte kraftvarmeverk i Sverige

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Cogeneration plants using bio fuel need a certificate in the Swedish electricity certificate system. Since the initiation of the system in 2003 the plants have taken advantage of the possibility of switching from fossil, to bio fuel. However, there is a potential for additional bio power production, provided that there is a market for the produced heating. The certificate system may contribute to an acceleration of investments in new capacities, and the facilitation of increased bio power production.

THE NEW CLASSICAL ECONOMY AND COUNTER-REVOLUTION OF THE MONETARISM

Directory of Open Access Journals (Sweden)

KRUME NIKOLOSKI

2016-06-01

Full Text Available The new classical economy as a school of economic thinking is developed on the basis of monetarism during 70’s and 80’s of the last century. At that time, monetarism as an extreme monetarist formulation had its golden era when it was necessary to maintain the money supply fairly stable, and that will increase slowly each year , mainly to allow natural growth of the economy. Monetarism spread in favor of economists, and the relationship between different measures of the money supply and inflation proved to be less clear than many monetary theories suggest. In this paper will be analyzed characteristics of monetary position, neglected role of money in Keynesian’s models, Phillips agreement for inflation / unemployment and the role of expectations

Supply Chain Finance in China: Business Innovation and Theory Development

Directory of Open Access Journals (Sweden)

Xiaohong Liu

2015-11-01

Full Text Available Supply chain finance (SCF is concerned with the capital flows within a supply chain, an area often neglected in past decades, while SCF does have an impact on a firm’s capability to adopt sustainable supply chain management (SCM practices. The aim of this study is to explore new insight from a growing body of research which is investigating SCF issues in China, an evolving transition economy. A content analysis on a review of 151 Chinese-written SCF papers from 2004–2014, based on a sample of 45 leading Chinese journals (Chinese Social Science Citation Index, CSSCI was conducted from three perspectives: topical coverage, theoretical application and methodological inquiry. The study reveals that the research stream of SCF in China has emerged and evolved to a considerable extent. However, the SCF phenomenon in China is not exactly the same as “SCF” as it is perceived in the mature economy, which is articulated in mainstream SCM English literature. The Chinese business context in which SCF has been implemented has played a dominant role in initiating, affecting and even shaping SCF. This study represents the first endeavor in the field of SCM. It diffuses the Chinese-written SCF research in mainstream SCM English literature.

Identification of Mycobacterium tuberculosis BioA inhibitors by using structure-based virtual screening

Directory of Open Access Journals (Sweden)

Singh S

2018-05-01

Full Text Available Swati Singh,1 Garima Khare,1 Ritika Kar Bahal,1 Prahlad C Ghosh,1 Anil K Tyagi1,2 1Department of Biochemistry, University of Delhi South Campus, New Delhi, India; 2Guru Gobind Singh Indraprastha University, New Delhi, India Background: 7,8-Diaminopelargonic acid synthase (BioA, an enzyme of biotin biosynthesis pathway, is a well-known promising target for anti-tubercular drug development. Methods: In this study, structure-based virtual screening was employed against the active site of BioA to identify new chemical entities for BioA inhibition and top ranking compounds were evaluated for their ability to inhibit BioA enzymatic activity. Results: Seven compounds inhibited BioA enzymatic activity by greater than 60% at 100 µg/mL with most potent compounds being A36, A35 and A65, displaying IC50 values of 10.48 µg/mL (28.94 µM, 33.36 µg/mL (88.16 µM and 39.17 µg/mL (114.42 µM, respectively. Compounds A65 and A35 inhibited Mycobacterium tuberculosis (M. tuberculosis growth with MIC90 of 20 µg/mL and 80 µg/mL, respectively, whereas compound A36 exhibited relatively weak inhibition of M. tuberculosis growth (83% inhibition at 200 µg/mL. Compound A65 emerged as the most potent compound identified in our study that inhibited BioA enzymatic activity and growth of the pathogen and possessed drug-like properties. Conclusion: Our study has identified a few hit molecules against M. tuberculosis BioA that can act as potential candidates for further development of potent anti-tubercular therapeutic agents. Keywords: Mycobacterium tuberculosis, BioA, virtual screening, drug discovery

Growing a market economy

Energy Technology Data Exchange (ETDEWEB)

Basu, N.; Pryor, R.J.

1997-09-01

This report presents a microsimulation model of a transition economy. Transition is defined as the process of moving from a state-enterprise economy to a market economy. The emphasis is on growing a market economy starting from basic microprinciples. The model described in this report extends and modifies the capabilities of Aspen, a new agent-based model that is being developed at Sandia National Laboratories on a massively parallel Paragon computer. Aspen is significantly different from traditional models of the economy. Aspen`s emphasis on disequilibrium growth paths, its analysis based on evolution and emergent behavior rather than on a mechanistic view of society, and its use of learning algorithms to simulate the behavior of some agents rather than an assumption of perfect rationality make this model well-suited for analyzing economic variables of interest from transition economies. Preliminary results from several runs of the model are included.

The Ignorance of the Knowledge-Based Economy. The Iconoclast.

Science.gov (United States)

McMurtry, John

1996-01-01

Castigates the supposed "knowledge-based economy" as simply a public relations smokescreen covering up the free market exploitation of people and resources serving corporate interests. Discusses the many ways that private industry, often with government collusion, has controlled or denied dissemination of information to serve its own interests.…

The potential demand for bioenergy in residential heating applications (bio-heat) in the UK based on a market segment analysis

International Nuclear Information System (INIS)

Jablonski, S.; Pantaleo, A.; Bauen, A.; Pearson, P.; Panoutsou, C.; Slade, R.

2008-01-01

How large is the potential demand for bio-heat in the UK? Whilst most research has focused on the supply of biomass for energy production, an understanding of the potential demand is crucial to the uptake of heat from bioenergy. We have designed a systematic framework utilising market segmentation techniques to assess the potential demand for biomass heat in the UK. First, the heat market is divided into relevant segments, characterised in terms of their final energy consumption, technological and fuel supply options. Second, the key technical, economic and organisational factors that affect the uptake of bioenergy in each heat segment are identified, classified and then analysed to reveal which could be strong barriers, which could be surmounted easily, and for which bioenergy heat represents an improvement compared to alternatives. The defined framework is applied to the UK residential sector. We identify provisionally the most promising market segments for bioenergy heat, and their current levels of energy demand. We find that, depending on the assumptions, the present potential demand for bio-heat in the UK residential sector ranges between 3% (conservative estimate) and 31% (optimistic estimate) of the total energy consumed in the heat market. (author)

Oahu, Hawaii's Water Supply: 1848-2020 A.D.

Science.gov (United States)

Felix, John Henry

Demand projections indicate that Oahu's natural ground water supply will be fully developed by the year 2000. Supplementary water resources will need to be developed in keeping with the growth of the economy and population. The author, chairman of the Honolulu Board of Water Supply, authoritatively discusses types of ground water in Hawaii, and…

Sustainable Bio-Aggregate-Based Composites Containing Hemp Hurds and Alternative Binder

Directory of Open Access Journals (Sweden)

Nadezda Stevulova

2018-02-01

Full Text Available This experimental study was focused on the application of a surface-modified hemp- hurds aggregate into composites using an alternative binder of MgO-cement. This paper presents the results of the comparative study of the parameters (chemical and physico-chemical modification, and hardening time affecting the physical (density, thermal conductivity coefficient and water-absorption behavior and mechanical properties (compressive strength of the bio-aggregate-based composite. A test of the parameters of the bio-composite samples showed some differences, which were determined by the chemical and surface properties of the modified filler, and which affected the mechanisms of hardening. The bulk density values of the hemp hurd composites hardened for 28 days place this material in the lightweight category of composites. The values of water absorption and the thermal conductivity coefficient of bio-composites decreased, and the strength parameter increased with an increase in the hardening time. The lower values of compressive strength, water absorption, and thermal conductivity coefficient (except for the ethylenediaminetetraacetic-acid-treated filler were observed in composites based on fillers chemically treated with NaOH and Ca(OH2 compared to referential composites (based on original hemp hurds. This is related to changes in the chemical composition of hemp hurds after chemical modification. The composites with ultrasound-treated hemp hurds had the greatest strengths at each hardening time. This is related to pulping the bundles of fibers and forming a larger surface area for bonding in the matrix.

Modelling a sector undergoing structural change: The case of Danish energy supply

DEFF Research Database (Denmark)

Klinge Jacobsen, Henrik

2000-01-01

for the demand of the produced goods. Environmental priorities and targets for emission reductions are important for defining energy policy in Denmark. As the energy supply sector at present is a major contributor to emissions of CO2 and SO2, knowledge of this sector is vital for reducing these emissions......This paper examines structural change in the power and heat producing sector (energy supply) and its implications for the economy. An integrated approach is used to describe the interactions between this sector and the rest of the economy. Thus, a very detailed model of the sector for Denmark has...... been linked to a macroeconometric model of the Danish economy. It is argued that analysing sectors that undergo radical changes, for example, the energy supply sector should be undertaken by using a model that describes the technological and organisational changes in production along with implications...

System for selecting a postponement strategy portfolio for supply chains

Directory of Open Access Journals (Sweden)

Luiz Eduardo Simão

2015-03-01

Full Text Available The stagnation of the economy has increased competition and uncertainty in the industrial sector. Trends such as the increase in the proliferation of the variety of products and the requirement for customization of products has contributed to difficulties in forecasting demand, due to increased uncertainty of demand for final products. In this new competitive environment, it is no longer possible to use the traditional “one size fits all” supply chain process, with unique policies for all products because this practice can lead to significant profitability losses due to the increase in stock levels and lost sales. However, research on supply chains has given relatively little attention to the need to use different, segmented supply chain strategies as well as to develop and manage these multiple supply chains strategies simultaneously. Thus, this paper aims to present an approach for selecting a portfolio of postponement strategies based on segmentation of supply chain, based on analysis of the demand profile (volume-variety analysis and a tool to assist in the selection of postponement strategies driven by the customer-product sector and their respective propositions of value.

Understanding bio-economics

OpenAIRE

Patel, M.K.

2008-01-01

New plants for production of bio-based fuels, chemicals or plastics are being set up at an accelerating pace. However, this transition towards bio-based fuels, feedstocks and chemicals has not come without consequences. Increased demand has pushed up prices of key agricultural products such as maize and corn with the result that consumers - especially those in low income areas - have reacted with concern and protest. At the same time, environmental research institutes and lobby groups - and n...

EVALUATION OF SERVICE SUPPLY CHAIN PERFORMANCE CRITERIA WITH DANP METHOD

OpenAIRE

ÖZVERİ, Onur; GÜÇLÜ, Pembe; AYCİN, Ejder

2018-01-01

Despite the service industry composes large part of the world economy, the academic studies and applications on supply chain are mainly about production industry. Because of the different structure of services, the service supply chain and also performance criteria-metrics differ from the product supply chain. The aim of this paper is to evaluate the supply chain performance metrics for restaurant sector. For this purpose in the first and second part of the paper the service supply chain conc...

BioFET-SIM

DEFF Research Database (Denmark)

Hediger, M. R.; Martinez, K. L.; Nygård, J.

2013-01-01

Biosensors based on nanowire field effect transistor (FET) have received much attention in recent years as a way to achieve ultra-sensitive and label-free sensing of molecules of biological interest. The BioFET-SIM computer model permits the analysis and interpretation of experimental sensor...... signals through its web-based interface www.biofetsim.org. The model also allows for predictions of the effects of changes in the experimental setup on the sensor signal. After an introduction to nanowire-based FET biosensors, this chapter reviews the theoretical basis of BioFET-SIM models describing both...... single and multiple charges on the analyte. Afterwards the usage of the interface and its relative command line version is briefly shown. Finally, possible applications of the BioFET-SIM model are presented. Among the possible uses of the interface, the effects on the predicted signal of pH, buffer ionic...

Supply chain finance

Directory of Open Access Journals (Sweden)

Kasavica Petar

2014-01-01

Full Text Available The concept of supply chain finance is a response to global illiquidity, intensified through the global economic crisis and globalization of commercial and financial flows. The growing illiquidity undermines credit ratings of economic entities, thereby reducing the potential for achieving the projected goals (profitability and portfolio quality. In order to overcome this, banks have introduced certain products flexible to the requirements of specific transactions. The concerned products redirect the focus from a client's credit rating and risk to the credit rating and risk of a business partner (buyer, resulting in benefits for all transaction participants ('win-win-win'. Moreover, the activities are targeted at transaction analysis, i.e. the isolation and protection of the cash flow as the source of financial instrument's repayment. On the other hand, there has been an increasing number of transactions based on the risk of the commercial bank of the client's business partner, or on the risk of collateral (inventory. The focus is actually placed on the financing of adequate supply chain stages, given that counterparty relationship management has been proven to be crucial for efficient management of one's own business. The tensions existing in the relations between partners (increasingly long payment deadlines are in the basis of the supply chain finance concept. Decisions made by banks are based on the entire supply chain (wide information basis, thereby shifting the focus from the product (as was the case before the crisis to the client's needs. Thus, decisions become increasingly comprehensive, quicker, and more precise, and portfolios less risky. Through the individual portfolio of banks, the market of national economies also becomes safer and more liquid. These are rather profitable transactions, because, due to the risk transfer, financing is enabled to companies to whom classic crediting in most cases is not available.

The Economy of a Regional Metropolis. Case-Study: Iasi, Romania

Directory of Open Access Journals (Sweden)

Claudia POPESCU

2011-06-01

Full Text Available The city of Iaşi with a population of over 300,000 people is the biggest European Union city at the border with the former-Soviet space. The article, part of an extended study on territorial development of Iaşi and its peri-urban area, focuses on the role of the city to trigger regional growth and to enhance cross border cooperation. Recent processes at work generating economic cohesion and integration are explored drawing on the catalytic factors of development and the specialization of local economies. The paper discusses also the externalities of urban growth such as the urban sprawl that causes land use conflicts at the rural-urban fringe. It argues that human capital and higher birth rates than the national average are the strengths, and low connectivity and accessibility are the weaknesses for regional growth. The regional polarization of the city is based on the supply of high level services over the entire North-East Region and opportunities to cross border cooperation through the expansion of an agro-alimentary supply-chain are highlighted. Building on the main capabilities and assets of the agglomeration economies of Iaşi, the paper finally identifies some of the mechanisms and structures that foster urban and regional growth.

Sustainable coatings from bio-based, enzymatically synthesized polyesters with enhanced functionalities

NARCIS (Netherlands)

Gustini, L.; Lavilla, C.; Finzel, L.; Noordover, B.A.J.; Hendrix, M.M.R.M.; Koning, C.E.

2016-01-01

Bio-based sorbitol-containing polyester polyols were synthesized via enzymatic polycondensation. The selectivity of the biocatalyst for primary vs. secondary hydroxyl groups allowed for the preparation of close to linear renewable polyester polyols with enhanced hydroxyl functionalities, both as

Landscape management for sustainable supplies of bio energy feedstock and enhanced soil quality

International Nuclear Information System (INIS)

Douglas, K.; Muth, D.

2013-01-01

Agriculture can simultaneously address global food, feed, fiber, and energy challenges provided our soil, water, and air resources are not compromised in doing so. Our objective is to present a landscape management concept as an approach for integrating multiple bio energy feedstock sources into current crop production systems. This is done to show how multiple, increasing global challenges can be met in a sustainable manner. We discuss how collaborative research among Usda-Agricultural Research Service (ARS), US Department of Energy (DOE) Idaho National Laboratory (INL), several university extension and research partners, and industry representatives [known as the Renewable Energy Assessment Project (Reap) team] has led to the development of computer-based decision aids for guiding sustainable bio energy feedstock production. The decision aids, known initially as the Corn Stover Tool and more recently as the Landscape Environmental Assessment Framework (Leaf) are tools designed to recognize the importance of nature s diversity and can therefore be used to guide sustainable feedstock production without having negative impacts on critical ecosystem services. Using a 57 ha farm site in central Iowa, USA, we show how producer decisions regarding corn (Zea mays L.) stover harvest within the US Corn Belt can be made in a more sustainable manner. This example also supports Reap team conclusions that stover should not be harvested if average grain yields are less than 11 Mg ha-1 unless more balanced landscape management practices are implemented. The tools also illustrate the importance of sub-field management and site-specific stover harvest strategies

Thermoplastic poly(urethane urea)s from novel, bio-based amorphous polyester diols

NARCIS (Netherlands)

Tang, D.; Noordover, B.A.J.; Sablong, R.J.; Koning, C.E.

2012-01-01

In this study, two novel, bio-based, amorphous polyester diols, namely poly(1,2-dimethylethylene adipate) (PDMEA) and poly(1,2-dimethylethylene succinate) (PDMES) are used to prepare thermoplastic poly(urethane urea)s (TPUUs). Interestingly, the TPUUs based on PDMEA show similar thermal and

The Closure of the Cycle: Enzymatic Synthesis and Functionalization of Bio-Based Polyesters.

Science.gov (United States)

Pellis, Alessandro; Herrero Acero, Enrique; Ferrario, Valerio; Ribitsch, Doris; Guebitz, Georg M; Gardossi, Lucia

2016-04-01

The polymer industry is under pressure to mitigate the environmental cost of petrol-based plastics. Biotechnologies contribute to the gradual replacement of petrol-based chemistry and the development of new renewable products, leading to the closure of carbon circle. An array of bio-based building blocks is already available on an industrial scale and is boosting the development of new generations of sustainable and functionally competitive polymers, such as polylactic acid (PLA). Biocatalysts add higher value to bio-based polymers by catalyzing not only their selective modification, but also their synthesis under mild and controlled conditions. The ultimate aim is the introduction of chemical functionalities on the surface of the polymer while retaining its bulk properties, thus enlarging the spectrum of advanced applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

Secure and Efficient Electricity Supply. During the Transition to Low Carbon Power Systems

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-01

Electricity shortages can paralyse our modern economies. All governments fear rolling black-outs and their economic consequences, especially in economies increasingly based on digital technologies. Over the last two decades, the development of markets for power has produced cost reduction, technological innovation, increased cross border trade and assured a steady supply of electricity. Now, IEA countries face the challenge of maintaining security of electricity supply during the transition to low-carbon economies. Low-carbon policies are pushing electricity markets into novel territories at a time when most of the generation and network capacity will have to be replaced. Most notably, wind and solar generation, now an integral part of electricity markets, can present new operating and investment challenges for generation, networks and the regional integration of electricity markets. In addition, the resilience of power systems facing more frequent natural disasters is also of increasing concern. IEA Ministers mandated the Secretariat to work on the Electricity Security Action Plan (ESAP), expanding to electricity the energy security mission of the IEA. This paper outlines the key conclusions and policy recommendations to ''keep the lights on'' while reducing CO2 emissions and increasing the efficiency.

Bio-oil based biorefinery strategy for the production of succinic acid

Science.gov (United States)

2013-01-01

Background Succinic acid is one of the key platform chemicals which can be produced via biotechnology process instead of petrochemical process. Biomass derived bio-oil have been investigated intensively as an alternative of diesel and gasoline fuels. Bio-oil could be fractionized into organic phase and aqueous phase parts. The organic phase bio-oil can be easily upgraded to transport fuel. The aqueous phase bio-oil (AP-bio-oil) is of low value. There is no report for its usage or upgrading via biological methods. In this paper, the use of AP-bio-oil for the production of succinic acid was investigated. Results The transgenic E. coli strain could grow in modified M9 medium containing 20 v/v% AP-bio-oil with an increase in OD from 0.25 to 1.09. And 0.38 g/L succinic acid was produced. With the presence of 4 g/L glucose in the medium, succinic acid concentration increased from 1.4 to 2.4 g/L by addition of 20 v/v% AP-bio-oil. When enzymatic hydrolysate of corn stover was used as carbon source, 10.3 g/L succinic acid was produced. The obtained succinic acid concentration increased to 11.5 g/L when 12.5 v/v% AP-bio-oil was added. However, it decreased to 8 g/L when 50 v/v% AP-bio-oil was added. GC-MS analysis revealed that some low molecular carbon compounds in the AP-bio-oil were utilized by E. coli. Conclusions The results indicate that AP-bio-oil can be used by E. coli for cell growth and succinic acid production. PMID:23657107

Nitrogen and phosphorus economy of a legume tree-cereal intercropping system under controlled conditions

International Nuclear Information System (INIS)

Isaac, M.E.; Hinsinger, P.; Harmand, J.M.

2012-01-01

Considerable amounts of nitrogen (N) and phosphorus (P) fertilizers have been mis-used in agroecosystems, with profound alteration to the biogeochemical cycles of these two major nutrients. To reduce excess fertilizer use, plant-mediated nutrient supply through N 2 -fixation, transfer of fixed N and mobilization of soil P may be important processes for the nutrient economy of low-input tree-based intercropping systems. In this study, we quantified plant performance, P acquisition and belowground N transfer from the N 2 -fixing tree to the cereal crop under varying root contact intensity and P supplies. We cultivated Acacia senegal var senegal in pot-culture containing 90% sand and 10% vermiculite under 3 levels of exponentially supplied P. Acacia plants were then intercropped with durum wheat (Triticum turgidum durum) in the same pots with variable levels of adsorbed P or transplanted and intercropped with durum wheat in rhizoboxes excluding direct root contact on P-poor red Mediterranean soils. In pot-culture, wheat biomass and P content increased in relation to the P gradient. Strong isotopic evidence of belowground N transfer, based on the isotopic signature (δ 15 N) of tree foliage and wheat shoots, was systematically found under high P in pot-culture, with an average N transfer value of 14.0% of wheat total N after 21 days of contact between the two species. In the rhizoboxes, we observed limitations on growth and P uptake of intercropped wheat due to competitive effects on soil resources and minimal evidence of belowground N transfer of N from acacia to wheat. In this intercrop, specifically in pot-culture, facilitation for N transfer from the legume tree to the crop showed to be effective especially when crop N uptake was increased (or stimulated) as occurred under high P conditions and when competition was low. Understanding these processes is important to the nutrient economy and appropriate management of legume-based agroforestry systems. -- Highlights

Interactions between the energy economy and the world economy in the next 10 to 15 years

International Nuclear Information System (INIS)

Nydegger, A.

1984-01-01

The present economic depression is unlikely to be succeeded by a lengthy lasting period of growth. An exponential increase in energy demand appears improbable. Into the nineties, the cause will not be an insufficient supply but the factors determining the demand. Later, scarcity may be important. This could seriously damage the world economy and keep the demand for energy at a relatively low level. (R.S.)

Life cycle assessment of bio-jet fuel from hydrothermal liquefaction of microalgae

International Nuclear Information System (INIS)

Fortier, Marie-Odile P.; Roberts, Griffin W.; Stagg-Williams, Susan M.; Sturm, Belinda S.M.

2014-01-01

Highlights: • A life cycle assessment of bio-jet fuel from wastewater algae was performed. • We used experimental data from algae cultivation through hydrothermal liquefaction. • We performed Monte Carlo and sensitivity analyses with ranges of parameter values. • Transport of moderately dewatered algae increased life cycle climate change impacts. • Collocation and heat integration reduce life cycle greenhouse gas emissions by 76%. - Abstract: Bio-jet fuel is increasingly being produced from feedstocks such as algae and tested in flight. As the industry adopts bio-jet fuels from various feedstocks and conversion processes, life cycle assessment (LCA) is necessary to determine whether these renewable fuels result in lower life cycle greenhouse gas (LC-GHG) emissions than conventional jet fuel. An LCA was performed for a functional unit of 1 GJ of bio-jet fuel produced through thermochemical conversion (hydrothermal liquefaction (HTL)) of microalgae cultivated in wastewater effluent. Two pathways were analyzed to compare the impacts of siting HTL at a wastewater treatment plant (WWTP) to those of siting HTL at a refinery. Base cases for each pathway were developed in part using primary data from algae production in wastewater effluent and HTL experiments of this algae at the University of Kansas. The LC-GHG emissions of these cases were compared to those of conventional jet fuel, and a sensitivity analysis and Monte Carlo analyses were performed. When algal conversion using HTL was modeled at a refinery versus at the WWTP site, the transportation steps of biomass and waste nutrients were major contributors to the LC-GHG emissions of algal bio-jet fuel. The LC-GHG emissions were lower for the algal bio-jet fuel pathway that performs HTL at a WWTP (35.2 kg CO 2eq /GJ for the base case) than for the pathway for HTL at a refinery (86.5 kg CO 2eq /GJ for the base case). The LCA results were particularly sensitive to the extent of heat integration, the source of

Enrichment of bio-oil after hydrothermal liquefaction (HTL) of microalgae C. vulgaris grown in wastewater: Bio-char and post HTL wastewater utilization studies.

Science.gov (United States)

Arun, Jayaseelan; Varshini, Padmanabhan; Prithvinath, P Kamath; Priyadarshini, Venkataramani; Gopinath, Kannappan Panchamoorthy

2018-08-01

In this study, bio-oil was produced through hydrothermal liquefaction (HTL) of C. vulgaris biomass cultivated in wastewater and was enriched into transportation fuels. Bio-oil yield was 29.37% wt at 300 °C, 60 min, at 15 g/200 mL biomass loading rate with 3% wt nano ZnO catalyst loading. Applying catalyst reduced oxygen and nitrogen content in bio-oil and increased its calorific value (19.6 ± 0.8 MJ/Kg). Bio-oil was enriched through liquid-liquid extraction (LLE) and higher yield was obtained at 30 °C for dichloromethane solvent (18.2% wt). Compounds of enriched oil were within the petro-diesel range (C 8 -C 21 ). Bio-char after HTL process was activated and used as adsorbent in wastewater treatment process to remove organic pollutants (COD, NO 3 , NH 3 and PO 4 ). Treated wastewater can be supplied as growth medium for microalgae cultivation in further experiments. Nearly 3-4 times the nanocatalyst can be reused in the HTL process. Copyright © 2018 Elsevier Ltd. All rights reserved.

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

Energy Technology Data Exchange (ETDEWEB)

Sujit Das, Josh Warren, Devin West, Susan M. Schexnayder

2016-05-01

This analysis identifies key opportunities in the carbon fiber supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas — wind energy, aerospace, automotive, and pressure vessels — that top the list of industries using carbon fiber and carbon fiber reinforced polymers. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.

Comparative techno-economic analysis of biohydrogen production via bio-oil gasification and bio-oil reforming

International Nuclear Information System (INIS)

Zhang, Yanan; Brown, Tristan R.; Hu, Guiping; Brown, Robert C.

2013-01-01

This paper evaluates the economic feasibility of biohydrogen production via two bio-oil processing pathways: bio-oil gasification and bio-oil reforming. Both pathways employ fast pyrolysis to produce bio-oil from biomass stock. The two pathways are modeled using Aspen Plus ® for a 2000 t d −1 facility. Equipment sizing and cost calculations are based on Aspen Economic Evaluation® software. Biohydrogen production capacity at the facility is 147 t d −1 for the bio-oil gasification pathway and 160 t d −1 for the bio-oil reforming pathway. The biomass-to-fuel energy efficiencies are 47% and 84% for the bio-oil gasification and bio-oil reforming pathways, respectively. Total capital investment (TCI) is 435 million dollars for the bio-oil gasification pathway and is 333 million dollars for the bio-oil reforming pathway. Internal rates of return (IRR) are 8.4% and 18.6% for facilities employing the bio-oil gasification and bio-oil reforming pathways, respectively. Sensitivity analysis demonstrates that biohydrogen price, biohydrogen yield, fixed capital investment (FCI), bio-oil yield, and biomass cost have the greatest impacts on facility IRR. Monte-Carlo analysis shows that bio-oil reforming is more economically attractive than bio-oil gasification for biohydrogen production. -- Highlights: ► Biohydrogen production via bio-oil reforming has higher energy efficiency compared to gasification. ► Hydrogen price, fixed capital cost, and feedstock cost most strongly affect IRR. ► Lower risk investment is biohydrogen production via bio-oil reforming

Energy economics and supply

International Nuclear Information System (INIS)

Anon.

1977-01-01

This section of the book, Part I, consists of four chapters (1--4). Chapter 1, Energy and the Economic Future, covers the following subjects: general economics of energy; predicting energy demand; a model of energy and the economy; and interpretations. Chapter 2, Uranium and Fossil Fuel Supplies, covers the following subjects: uranium resources; oil and gas supplies; coal resources. Chapter 3, Economics of Nuclear Power, covers information on sources of uncertainty; cost of nuclear power; cost of coal-generated electricity. Chapter 4, Alternative Energy Sources, sums information on solar energy, geothermal energy, fusion power, conservation, and transmission

Green economy in Finnish society; Vihreae talous suomalaisessa yhteiskunnassa

Energy Technology Data Exchange (ETDEWEB)

Antikainen, R.; Laehtinen, K.; Leppaenen, M.; Furman, E.

2013-02-15

The concept of a green economy is commonly used in public discussion, but no unanimity exists as to its definition. The objective of this report was to increase understanding of the concept of green economy and the changes required by the transition to a green economy. The report is part of the 'Green economy - analysis of the concept and its consequences for various parties' project, implemented by the Finnish Environment Institute (SYKE) in 2012. The research material comprised literature, web-based background surveys, results of a multidisciplinary workshop for scientists and a workshop for relevant actors, opening presentations for the workshops, expert opinions voiced in the workshops, and discussions of the project steering group. Examples of the elements of a green economy are resource - i.e. energy and material - efficiency, the reduction of resource use, the improvement of resource use efficiency and recycling of resources, the move from tangible to intangible value creation, and the revising of corporate business models, such as models of industrial symbiosis and increased service orientation. Of key importance in this transformation are new models for production and communities, the preservation of natural capital and taking account of challenges presented by the global operating environment, as well as the implementation of sustainability principles. A green economy is seen to contribute to domestic well-being, employment and the economy, while enabling the internationalisation of companies and international business. Finland's strengths lie in expertise related to areas such as bioeconomy, cleantech, water and water supply, and recycling. A further strength is the traditionally close cooperative relationships between various actors. However, silo thinking should be further reduced, as it slows down reform, and collaboration initiatives and experiments between actors and on the level of policies should be supported. In the future, it

Deriving local demand for stumpage from estimates of regional supply and demand.

Science.gov (United States)

Kent P. Connaughton; Gerard A. Majerus; David H. Jackson

1989-01-01

The local (Forest-level or local-area) demand for stumpage can be derived from estimates of regional supply and demand. The derivation of local demand is justified when the local timber economy is similar to the regional timber economy; a simple regression of local on nonlocal prices can be used as an empirical test of similarity between local and regional economies....

Fuel economy of hybrid fuel-cell vehicles

Science.gov (United States)

Ahluwalia, Rajesh K.; Wang, X.; Rousseau, A.

The potential improvement in fuel economy of a mid-size fuel-cell vehicle by combining it with an energy storage system has been assessed. An energy management strategy is developed and used to operate the direct hydrogen, pressurized fuel-cell system in a load-following mode and the energy storage system in a charge-sustaining mode. The strategy places highest priority on maintaining the energy storage system in a state where it can supply unanticipated boost power when the fuel-cell system alone cannot meet the power demand. It is found that downsizing a fuel-cell system decreases its efficiency on a drive cycle which is compensated by partial regenerative capture of braking energy. On a highway cycle with limited braking energy the increase in fuel economy with hybridization is small but on the stop-and-go urban cycle the fuel economy can improve by 27%. On the combined highway and urban drive cycles the fuel economy of the fuel-cell vehicle is estimated to increase by up to 15% by hybridizing it with an energy storage system.

Design and Fabrication of Piezoresistive Based Encapsulated Poly-Si Cantilevers for Bio/chemical Sensing

Science.gov (United States)

Krishna, N. P. Vamsi; Murthy, T. R. Srinivasa; Reddy, K. Jayaprakash; Sangeeth, K.; Hegde, G. M.

Cantilever-based sensing is a growing research field not only within micro regime but also in nano technology. The technology offers a method for rapid, on-line and in-situ monitoring of specific bio/chemical substances by detecting the nanomechanical responses of a cantilever sensor. Cantilever with piezoresistive based detection scheme is more attractive because of its electronics compatibility. Majority of commercially available micromachined piezoresistive sensors are bulk micromachined devices and are fabricated using single crystal silicon wafers. As substrate properties are not important in surface micromachining, the expensive silicon wafers can be replaced by cheaper substrates, such as poly-silicon, glass or plastic. Here we have designed SU-8 based bio/chemical compatible micro electro mechanical device that includes an encapsulated polysilicon piezoresistor for bio/chemical sensing. In this paper we report the design, fabrication and analysis of the encapsulated poly-Si cantilevers. Design and theoretical analysis are carried out using Finite Element Analysis software. For fabrication of poly-silicon piezoresistive cantilevers we followed the surface micromachining process steps. Preliminary characterization of the cantilevers is presented.

Legislation in the electricity economy 1980

International Nuclear Information System (INIS)

Antoni, W.; Haeusler, C.; Hermann, H.P.; Meyer-Woebse, G.; Schmidt, K.

1981-01-01

The authors survey substantial developments of legislation in the electricity economy in 1980. They deal with prominent, legal subjects of a political nature and discuss questions posed by the interpretation and application of laws with regard to supply concepts, to the 4th amendment to the anti-trust law, to legislation relating to the anti-trust law, to recommendations by the Investigation Committee, to rate approvals, general terms and conditions governing supplies, to atomic energy law, to the environmental protection law, to the law relating to the conservation of nature and preservation of rural amenities, to the law relating to roads and to developments of tax laws. (HSCH) [de

Ontology-Based Querying with Bio2RDF's Linked Open Data.

Science.gov (United States)

Callahan, Alison; Cruz-Toledo, José; Dumontier, Michel

2013-04-15

A key activity for life scientists in this post "-omics" age involves searching for and integrating biological data from a multitude of independent databases. However, our ability to find relevant data is hampered by non-standard web and database interfaces backed by an enormous variety of data formats. This heterogeneity presents an overwhelming barrier to the discovery and reuse of resources which have been developed at great public expense.To address this issue, the open-source Bio2RDF project promotes a simple convention to integrate diverse biological data using Semantic Web technologies. However, querying Bio2RDF remains difficult due to the lack of uniformity in the representation of Bio2RDF datasets. We describe an update to Bio2RDF that includes tighter integration across 19 new and updated RDF datasets. All available open-source scripts were first consolidated to a single GitHub repository and then redeveloped using a common API that generates normalized IRIs using a centralized dataset registry. We then mapped dataset specific types and relations to the Semanticscience Integrated Ontology (SIO) and demonstrate simplified federated queries across multiple Bio2RDF endpoints. This coordinated release marks an important milestone for the Bio2RDF open source linked data framework. Principally, it improves the quality of linked data in the Bio2RDF network and makes it easier to access or recreate the linked data locally. We hope to continue improving the Bio2RDF network of linked data by identifying priority databases and increasing the vocabulary coverage to additional dataset vocabularies beyond SIO.

Overview of MPC applications in supply chains: Potential use and benefits in the management of forest-based supply chains

Directory of Open Access Journals (Sweden)

Tatiana M. Pinho

2015-12-01

Full Text Available Aim of study: This work aims to provide an overview of Model Predictive Controllers (MPC applications in supply chains, to describe the forest-based supply chain and to analyse the potential use and benefits of MPC in a case study concerning a biomass supply chain.Area of study: The proposed methods are being applied to a company located in Finland.Material and methods: Supply chains are complex systems where actions and partners’ coordination influence the whole system performance. The increase of competitiveness and need of quick responses to the costumers implies the use of efficient management techniques. The control theory, particularly MPC, has been successfully used as a supply chain management tool. MPC is able to deal with dynamic interactions between the partners and to globally optimize the supply chain performance in the presence of disturbances. However, as far as is authors’ knowledge, there are no applications of this methodology in the forest-based supply chains. This work proposes a control architecture to improve the performance of the forest supply chain. The controller is based on prediction models which are able to simulate the system and deal with disturbances.Main results: The preliminary results enable to evaluate the impacts of disturbances in the supply chain. Thus, it is possible to react beforehand, controlling the schedules and tasks’ allocation, or alert the planning level in order to generate a new plan.Research highlights:   Overview of MPC applications in supply chains; forest-based supply chain description; case study presentation: wood biomass supply chain for energy production; MPC architecture proposal to decrease the operation times.Keywords: biomass; forest; Model Predictive Control; planning; supply chain.

Large-proportional shrunken bio-replication of shark skin based on UV-curing shrinkage

International Nuclear Information System (INIS)

Chen, Huawei; Che, Da; Zhang, Xin; Yue, Yue; Zhang, Deyuan

2015-01-01

The shark skin effect has attracted worldwide attention because of its superior drag reduction. As the product of natural selection, the maximum drag reduction of shark skin is found in its normal living environment. Large-proportional shrinkage of shark skin morphology is greatly anticipated for its adaptation to faster fluid flow. One novel approach, large-proportional shrunken bio-replication, is proposed as a method to adjust the optimal drag reduction region of shark skin based on the shrinkage of UV-cured material. The shark skin is taken as a replica template to allow large-proportional shrinking in the drag reduction morphology by taking advantage of the shrinkage of UV-curable material. The accuracy of the large-proportional shrunken bio-replication approach is verified by a comparison between original and shrunken bio-replicated shark skin, which shows that the shrinking ratio can reach 23% and the bio-replication accuracy is higher than 95%. In addition, the translation of the optimum drag reduction peak of natural surface function to various applications and environments is proved by drag reduction experiments. (technical note)

Synthesis and Characterization of Bio-Oil Phenol Formaldehyde Resin Used to Fabricate Phenolic Based Materials.

Science.gov (United States)

Cui, Yong; Hou, Xiaopeng; Wang, Wenliang; Chang, Jianmin

2017-06-18

In this study, bio-oil from the fast pyrolysis of renewable biomass was used as the raw material to synthesize bio-oil phenol formaldehyde (BPF) resin-a desirable resin for fabricating phenolic-based material. During the synthesis process, paraformaldehyde was used to achieve the requirement of high solid content and low viscosity. The properties of BPF resins were tested. Results indicated that BPF resin with the bio-oil addition of 20% had good performance on oxygen index and bending strength, indicating that adding bio-oil could modify the fire resistance and brittleness of PF resin. The thermal curing behavior and heat resistance of BPF resins were investigated by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Results showed that adding bio-oil had an impact on curing characteristics and thermal degradation process of PF resin, but the influence was insignificant when the addition was relatively low. The chemical structure and surface characteristics of BPF resins were determined by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The analysis demonstrated that adding bio-oil in the amount of 20% was able to improve the crosslinking degree and form more hydrocarbon chains in PF resin.

Synthesis and Characterization of Bio-Oil Phenol Formaldehyde Resin Used to Fabricate Phenolic Based Materials

Directory of Open Access Journals (Sweden)

Yong Cui

2017-06-01

Full Text Available In this study, bio-oil from the fast pyrolysis of renewable biomass was used as the raw material to synthesize bio-oil phenol formaldehyde (BPF resin—a desirable resin for fabricating phenolic-based material. During the synthesis process, paraformaldehyde was used to achieve the requirement of high solid content and low viscosity. The properties of BPF resins were tested. Results indicated that BPF resin with the bio-oil addition of 20% had good performance on oxygen index and bending strength, indicating that adding bio-oil could modify the fire resistance and brittleness of PF resin. The thermal curing behavior and heat resistance of BPF resins were investigated by differential scanning calorimetry (DSC and thermal gravimetric analysis (TGA. Results showed that adding bio-oil had an impact on curing characteristics and thermal degradation process of PF resin, but the influence was insignificant when the addition was relatively low. The chemical structure and surface characteristics of BPF resins were determined by Fourier transform infrared (FTIR spectroscopy and scanning electron microscopy (SEM. The analysis demonstrated that adding bio-oil in the amount of 20% was able to improve the crosslinking degree and form more hydrocarbon chains in PF resin.

Development of integrated models for energy-economy systems analysis at JAERI

International Nuclear Information System (INIS)

Yasukawa, Shigeru; Mankin, Shuichi; Sato, Osamu; Yonese, Hiromi

1984-08-01

This report, being a revision of the preprint for distribution to participants at IEA/ETSAP Workshop held, at JAERI, Tokyo, March 1984, describes the concept of the integrated models for energy-economy systems analysis now being carried out at JAERI. In this model system, there contains four different categories of computer codes. The first one is a series of computer codes named as E 3 -SD representatively, which are utilized to develop a dynamic scenario generation in a long-term energy economy evolution. The second one, of which the main constituents are the MARKAL, i.e. an optimal energy flow analizer, and the TRANS-I/O, i.e. a multi-sectoral economy analyzer, has been developed for the analysis of structural characteristics embodied in our energy-economy system. The third one is for a strategy analysis on nuclear power reactor installation and fuel cycle development, and its main constituent is the JALTES. The fourth one is for a cost-benefit-risk analysis including various kinds of data bases. As the model system being still under development, but the idea of application of it to such a problem as '' the role of the HTGR in the prospects of future energy supply'' is also explained in the report. (author)