Recurrent epistaxis caused by an intranasal supernumerary tooth in a young adult.

Science.gov (United States)

Al Dhafeeri, Hamed O; Kavarodi, Abdulmajid; Al Shaikh, Khalil; Bukhari, Ahmed; Al Hussain, Omair; El Baramawy, Ahmed

2014-01-01

Male, 27. Recurrent epistaxis. Nasal bleeding. -. -. Pediatrics and Neonatology. Congenital defects/diseases. Recurrent epistaxis is a common disorder among children and young adults. We report an unusual cause, intranasal supernumerary tooth causing friction with Little's area of the nasal septum. A 22-year-old male presented with recurrent, mild, unilateral left-sided epistaxis once to twice per month for 3 years. This usually occurred after minor nasal trauma or rubbing his nose. The patient also suffered from recurrent tonsillitis. There was neither history of blood transfusion or nasal packing, nor a history suggestive of bleeding diathesis. Anterior rhinoscopy revealed ivory white nasal mass antero-inferiorly in the left nasal cavity touching Little's area. There was no bleeding. Nasal endoscopy showed a white cylindrical bony mass 1 cm long arising from the floor of the nose, with no attachment to the nasal septum or the lateral wall of the nose. Examination of the right nasal cavity was unremarkable. Nasal teeth result from the ectopic eruption of supernumerary teeth and may cause a variety of symptoms including recurrent epistaxis. Their clinical and radiologic presentation is so characteristic that their diagnosis is not difficult. CT scan is helpful in planning management. Early extraction prevents further complications and prevents further attacks of epistaxis.

Bilateral Supernumerary Teeth in Deciduous Dentition-A Rarity

OpenAIRE

Acharya, Sonu; Ghosh, Chiranjit; Mondal, Pradeep Kumar

2014-01-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition and more often seen in males. A supernumerary tooth in the primary dentition can cause ectopic or delayed eruption of permanent centr...

Revascularization of an impacted, immature dilacerated permanent maxillary central incisor associated with odontoma and a supernumerary tooth

Directory of Open Access Journals (Sweden)

Priya Subramaniam

2013-01-01

Full Text Available To intentionally replant an impacted immature permanent maxillary central incisor in the mixed dentition period followed by revascularization in order to achieve apical root closure. A 9-year-old boy presented with retained maxillary left primary incisors. Radiographic evaluation revealed the presence of a supernumerary tooth and an odontoma associated with an impacted permanent maxillary left central incisor, having root dilaceration. Treatment included surgical removal of mesiodens and odontoma. The impacted dilacerated permanent central incisor was removed and intentionally replanted, followed by revascularization of pulp. During the follow-up, root end closure with narrowing of canal space was observed, patient has been asymptomatic and the tooth remains vital. Revascularization of the immature reimplanted tooth showed continued root development and thickening of the lateral dentinal walls through deposition of new hard tissue and narrowing of the canal space.

Bilateral supernumerary teeth in deciduous dentition-a rarity.

Science.gov (United States)

Acharya, Sonu; Ghosh, Chiranjit; Mondal, Pradeep Kumar

2014-05-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition and more often seen in males. A supernumerary tooth in the primary dentition can cause ectopic or delayed eruption of permanent central incisors which will further alter occlusion and may compromise esthetics and formation of dentigerous cysts. Here we discuss a case of bilateral supernumerary teeth in deciduous dentition in a female child.

Bilateral maxillary fused second and third molars: a rare occurrence.

Science.gov (United States)

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-12-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

Tuberculate and odontoma type supernumerary teeth.

Science.gov (United States)

Tarján, Ildikó; Gyulai, Szabolcs G; Soós, Attila; Rózsa, Noémi

2005-11-01

An 8-and-a-half-year-old girl with supernumerary teeth of tuberculate and odontoma type is described. Treatment of the patient is carried out on conventional lines with a combination of surgical and orthodontic methods. The upper tuberculate type supernumerary teeth were extracted and, after surgical exposure, the upper permanent first incisors were aligned with removable appliances. After secondary dentition was completed, the lower odontoma type supernumerary tooth was removed surgically, and also the maxillary and mandibular first premolars were extracted because of severe crowding, and fixed orthodontic appliances were used to align the permanent dentition. Early diagnosis and treatment of this anomaly is necessary to avoid more serious consequences and to prevent severe orthodontic disturbances.

Syndromes with supernumerary teeth.

Science.gov (United States)

Lubinsky, Mark; Kantaputra, Piranit Nik

2016-10-01

While most supernumerary teeth are idiopathic, they can be associated with a number of Mendelian syndromes. However, this can also be a coincidental finding, since supernumerary teeth occur in 6% or more of the normal population. To better define this relationship, we analyzed the evidence for specific associations. We excluded conditions with a single affected patient reported, supernumerary teeth adjacent to clefts or other forms of alveolar disruption (as secondary rather than primary findings), and natal teeth, which can involve premature eruption of a normal tooth. Since, the cause of supernumerary teeth shows considerable heterogeneity, certain findings are less likely to be coincidental, such as five or more supernumerary teeth in a single patient, or locations outside of the premaxilla. We found only eight genetic syndromes with strong evidence for an association: cleidocranial dysplasia; familial adenomatous polyposis; trichorhinophalangeal syndrome, type I; Rubinstein-Taybi syndrome; Nance-Horan syndrome; Opitz BBB/G syndrome; oculofaciocardiodental syndrome; and autosomal dominant Robinow syndrome. There is also suggestive evidence of an association with two uncommon disorders, Kreiborg-Pakistani syndrome (craniosynostosis and dental anomalies), and insulin-resistant diabetes mellitus with acanthosisnigricans. An association of a Mendelian disorder with a low frequency manifestation of supernumerary teeth is difficult to exclude without large numbers, but several commonly cited syndromes lacked evidence for clear association, including Hallermann-Streiff syndrome, Fabry disease, Ehlers-Danlos syndrome, Apert and Crouzon syndromes, Zimmermann-Laband syndrome, and Ellis-van Creveld syndrome. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

INVESTIGATION OF IMPACTED SUPERNUMERARY TEETH: A CONE BEAM COMPUTED TOMOGRAPH (CBCT STUDY

Directory of Open Access Journals (Sweden)

Gökhan GÜRLER

2017-10-01

Full Text Available Purpose: The purpose of this study was to investigate the impacted supernumerary teeth which were initially detected on panoramic radiographs by using cone beam computed tomography (CBCT. Materials and Methods: In this retrospective study, supernumerary teeth diagnosed on panoramic radiographs taken from patients who had admitted for routine dental treatment were evaluated using CBCT. Patients’ age, gender, systemic conditions as well as number of supernumerary teeth, unilateral-bilateral presence, anatomical localization (maxilla, mandible, anterior-premolar-molar, mesiodens-lateral-canine, parapremolar-paramolar-distomolar shape (rudimentary, supplemental, tuberculate, odontoma, position (palatal-lingual-buccal-labial-central, shortest distance between the tooth and adjacent cortical plate, complications and treatment were assessed. Results: A total of 47 impacted supernumerary teeth in 34 patients were investigated in this study. Of these, 33 (70.2% were unilateral and 14 (29.8% were bilateral. Only 1 supernumerary tooth was found in 27 patients (79.4% whereas 7 patients (20.6% had 2 or more supernumerary teeth. Most of the teeth located in the anterior region (74.4% of the jaws and maxilla (74.4%. Twenty teeth (42.5% were mesiodens, 11 (23.4% were lateral or canine, 14 (29.7% were parapremolar and 2(4.4% were distomolar. Twenty-seven teeth (57.4% were rudimentary, 15 (31.9% were supplemental and 5 (10.7% were odontoma in shape. The shortest distance between the supernumerary tooth and adjacent cortical plate varied between 0 to 2.5 mm with a mean of 0.66 mm. The most common clinical complaint was the non-eruption of permanent teeth (42.5%. All supernumerary teeth were removed under local anesthesia. Orthodontic traction was performed for those impacted permanent teeth if necessary. Conclusion: Impacted supernumerary teeth are usually in close proximity to cortical bone. Although this may facilitate surgical access, there is a risk of

Non-syndromic supernumerary teeth: report of a case with 6 supernumerary teeth

Directory of Open Access Journals (Sweden)

Taghibakhsh M

2011-02-01

Full Text Available "nBackground and Aims: Multiple supernumerary teeth are rare and often found in association with syndromes such as Gardner, Cleidocranial dysplasia and cleft lip and palate, with a much less chance for isolated"nnon-syndromic cases. The aim of this study was to report a case with 6 supernumerary teeth without syndromic association."nCase Report: The patient was a 33 year-old female, referred to oral diseases and diagnosis department with chief complaint of sensitivity to cold and hot food in right upper premolar region. Oral examination revealed 5 erupted lingually supernumerary teeth (four in mandibular and one in maxillary premolar region, respectively. Further panoramic radiography clarified an extra impacted tooth in the palatal region of left premolar maxillary area. All extra teeth had been appeared since the age of 17 during one year, as the patient claimed. Medical history and thorough clinical and paraclinical examinations were not significant except for the hypothyroidism, since 5 years ago. No other family member noticed to be the case. Based on our findings, a diagnosis of non-syndromic multiple supernumerary teeth was established."nConclusion: A thorough examination of each patient presented with supernumerary teeth, including panoramic and intraoral radiographic images may provide valuable information regarding accompanying syndromes and unerupted teeth. Early diagnosis is an essential step for orthodontic or surgical decisions making, preventing or avoiding worsening complications such as malocclusion, adjacent normal teeth delayed eruption or rotation, diasthema, cystic lesions and resorption of contiguous teeth.

Nonsyndromic Bilateral Multiple Impacted Supernumerary Mandibular Third Molars: A Rare and Unusual Case Report

Directory of Open Access Journals (Sweden)

G. Siva Prasad Reddy

2013-01-01

Full Text Available A supernumerary tooth is that which is present additionally to the normal series and can be found in any region of the dental arch. An impacted tooth is defined as the one which is embedded in the alveolus, so that its eruption is prevented, or the tooth is locked in position by bone or the adjacent teeth. The occurrence of multiple supernumerary teeth in only one patient in the absence of an associated systemic condition or syndrome is considered as a rare phenomenon. The occurrence of supernumerary teeth in the lower molar region is rare. A prevalence of less than 2% of cases occurring in this region has been estimated. Their occurrence presents a clinical problem for orthodontists and oral surgeons. The cause, frequency, complications, and surgical operation of impacted teeth are always interesting subjects for study and research. An impacted tooth can result in caries, pulp disease, periapical and periodontal disease, temporomandibular joint disorder, infection of the fascial space, root resorption of the adjacent tooth, and even oral and maxillofacial tumours. The management of impacted wisdom teeth has changed over the past 20 years from removal of nonsymptomatic third molars to simple observation. The aim of this paper is to present a rare case of bilateral multiple impacted supernumerary mandibular third molars.

Bilateral Maxillary Central Incisor Impaction associated with Developing Supernumerary Premolars in the Mandibular Arch

Directory of Open Access Journals (Sweden)

Mitali Mishra

2014-01-01

We report a case of 15-year-old girl with bilaterally impacted supernumeraries in the premaxilla region associated with asymptomatic impacted developing supernumerary premolars in the mandibular arch. The supernumeraries of premaxilla region impeded the eruption of the permanent maxillary central incisors. The impacted supernumerary tooth was surgically removed and brackets bonded to the central incisors to apply orthodontic extrusive force which brought the central incisors down to their proper position in the dental arch.

The radiographic localization of unerupted maxillary incisors and supernumeraries

International Nuclear Information System (INIS)

Kim, Jae Duk; Lee, Chang Yul; You, Choong Hyun

2003-01-01

To evaluate the use of the vertical tube shift from a panoramic film and a periapical film to localize unerupted maxillary incisors and supernumeraries. The total of 103 displaced maxillary incisors or embedded supernumeraries were examined in this study. The vertical tube shift technique with panoramic and periapical radiography by normal projection taken and compared to localize the position of the embedded maxillary incisors or supernumeraries by a radiologist and 5 general dentists. The gold standard used for the radiographic comparisons was the true position of the embedded tooth as confirmed by horizontal tube shift technique using three periapical radiographs. The general dentist examiners were instructed on the use of the modified acronym 'SLDOBU' by the radiologist as it pertains to panoramic radiographs as the principle of vertical tube shift. All of the embedded maxillary incisors and supernumeraries were successfully located using the vertical tube shift from a panoramic and a maxillary anterior periapical radiograph by the radiologist and 5 general dentists. The use of a panoramic film with a periapical film combination for a vertical tube shift can be useful to localize unerupted maxillary incisors and supernumeraries.

Interdisciplinary management of dental anomalies: fusion and supernumerary teeth.

Science.gov (United States)

Gautam, G; Kumari, V Shashikala; Jayashankar, C M; Hadge, Parag; Garg, Garima

2011-01-01

A 16-year-old boy presented with a fused permanent maxillary left central incisor with a supplemental tooth and an additional supplemental tooth lingual to the permanent maxillary right central incisor. Following leveling, alignment, and endodontic therapy, the maxillary fused left central incisor was sectioned and the mesial portion extracted as planned. Fixed orthodontic treatment commenced after 10 days to align the maxillary anterior segment. After completion, the midline diastema was closed with veneers. This case highlights the treatment options of a fused tooth and the need for multidisciplinary planning and treatment.

The detailed evaluation of supernumerary teeth with the aid of cone beam computed tomography

International Nuclear Information System (INIS)

Tumen, E.C.; Yavuz, I.; Atakul, F.; Tumen, D.S.; Hamamci, N.; Berber, G.; Uysal, E.

2010-01-01

The aim of this paper is to demonstrate the application of a recently developed three-dimensional imaging system, cone beam computed tomography, in the detailed evaluation of supernumerary teeth. Two-hundred and twenty three patients with supernumerary teeth (68 females and 155 males) were included in this study. Patients ranged in age from 12 to 25 years. Supernumerary teeth were detected by clinical examination and traditional radiographies. Moreover, careful investigation for more details was made with the cone beam computed tomography. Supernumerary teeth which were detected with the examinations of the cone beam computed tomography images were classified according to the number, location, shape and eruption rate. The prevalence of supernumerary teeth was determined to be 1.45% of the study population. Males were affected more than females in a ratio of 2.3:1. Supernumerary teeth were most frequently located in 86.2% of the cases in the maxilla; 10.1% in the mandible and 3.7% both in the maxilla and mandible. Supernumerary teeth were most commonly conical in shape (68.8%). One supernumerary tooth was present in 67.7% of the patients, 30.9% had two, and 1.4% had three supernumeraries. Definite and early diagnosis of the supernumerary teeth is very important. Detailed examinations and evaluations of these teeth with three-dimensional images is very beneficial in terms of treatment planning and preventing complications which may occur.

Endodontic treatment of a fused tooth. Report of a case.

Science.gov (United States)

Gallottini, L; Barbato Bellatini, R C; Migliau, G

2007-01-01

Dental fusion, a rare developmental anomaly present in 0.2% of the general population, consists of the union of two teeth originating from two different tooth germs. The irregular coronal morphology and the complex endodontic anatomy, characterized by the partial or total union of the pulp chambers, together with the peculiarity of the root canal systems, make diagnosis, therapy and rehabilitation difficult. The authors describe the endodontic treatment of a permanent lower second molar fused with a third molar and having four root canals.

Antagonistic Functions of USAG-1 and RUNX2 during Tooth Development.

Directory of Open Access Journals (Sweden)

Yumiko Togo

Full Text Available Supernumerary teeth and tooth agenesis are common morphological anomalies in humans. We previously obtained evidence that supernumerary maxillary incisors form as a result of the successive development of the rudimentary maxillary incisor tooth germ in Usag-1 null mice. The development of tooth germs is arrested in Runx2 null mice, and such mice also exhibit lingual epithelial buds associated with the upper molars and incisors. The aim of this study is to investigate the potential crosstalk between Usag-1 and Runx2 during tooth development. In the present study, three interesting phenomena were observed in double null Usag-1-/-/Runx2-/- mice: the prevalence of supernumerary teeth was lower than in Usag-1 null mice; tooth development progressed further compared than in Runx2 null mice; and the frequency of molar lingual buds was lower than in Runx2 null mice. Therefore, we suggest that RUNX2 and USAG-1 act in an antagonistic manner. The lingual bud was completely filled with odontogenic epithelial Sox2-positive cells in the Usag-1+/+/Runx2-/- mice, whereas almost no odontogenic epithelial Sox2-positive cells contributed to supernumerary tooth formation in the rudimentary maxillary incisors of the Usag-1-/-/Runx2+/+ mice. Our findings suggest that RUNX2 directly or indirectly prevents the differentiation and/or proliferation of odontogenic epithelial Sox2-positive cells. We hypothesize that RUNX2 inhibits the bone morphogenetic protein (BMP and/or Wnt signaling pathways regulated by USAG-1, whereas RUNX2 expression is induced by BMP signaling independently of USAG-1.

Supernumerary teeth: case report and literature review

International Nuclear Information System (INIS)

Bolanos Lopez, Violeta

2008-01-01

Supernumerary teeth (ST) have been an anomaly of tooth development, this is refered to the increase in the number of pieces in the normal dentition. It can be unique, multiple, unilateral or bilateral, normal or altered form; appear erupted, impacted or retained. Both dentitions are affected, but is most common in the permanent. The literature review has covered and mentioned spanned supernumerary teeth, the definition, etiology, characteristics and classification according to number, position and shape; as diagnose, alterations or clinical sequelae - eruptive associated with them and possible treatments to be done when it occurs. The presence of mechanical accidents have been a frequent complication, within this, displacement of adjacent teeth has been the most common; is associated with different syndromes such as lip and palate cleft; however, they can not be related with pathologies; being mesiodens the most frequent. (author) [es

Agenesis of premolar associated with submerged primary molar and a supernumerary premolar: An unusual case report

Directory of Open Access Journals (Sweden)

S. V. S. G. Nirmala

2012-01-01

Full Text Available The combination of submerged primary molar, agenesis of permanent successor with a supernumerary in the same place is very rare. The purpose of this article is to report a case of submerged mandibular left second primary molar with supernumerary tooth in the same region along with agenesis of second premolar in an 11-year-old girl, its possible etiological factors, and a brief discussion on treatment options.

The pattern of a specimen of Pycnogonum litorale (Arthropoda, Pycnogonida) with a supernumerary leg can be explained with the "boundary model" of appendage formation

Science.gov (United States)

Scholtz, Gerhard; Brenneis, Georg

2016-02-01

A malformed adult female specimen of Pycnogonum litorale (Pycnogonida) with a supernumerary leg in the right body half is described concerning external and internal structures. The specimen was maintained in our laboratory culture after an injury in the right trunk region during a late postembryonic stage. The supernumerary leg is located between the second and third walking legs. The lateral processes connecting to these walking legs are fused to one large structure. Likewise, the coxae 1 of the second and third walking legs and of the supernumerary leg are fused to different degrees. The supernumerary leg is a complete walking leg with mirror image symmetry as evidenced by the position of joints and muscles. It is slightly smaller than the normal legs, but internally, it contains a branch of the ovary and a gut diverticulum as the other legs. The causes for this malformation pattern found in the Pycnogonum individual are reconstructed in the light of extirpation experiments in insects, which led to supernumerary mirror image legs, and the "boundary model" for appendage differentiation.

Endodontic treatment of developmental anomalies in posterior teeth: treatment of geminated/fused teeth--report of two cases.

Science.gov (United States)

Tsesis, I; Steinbock, N; Rosenberg, E; Kaufman, A Y

2003-05-01

Gemination or fusion is a rare occurrence in the mandibular posterior teeth. Endodontic treatment of these teeth needs special care and attention to the bizarre anatomy. The aim of this article is to describe the problems encountered and the strategy in treating such cases. Two cases of complex endodontic treatment of fused/geminated teeth are presented. The first is an 11-year-old girl with an anomalous 'double' first mandibular molar and premolar diagnosed as having necrotic pulp with chronic apical abscess of endodontic origin; the second is a 16-year-old boy with 'double' second and supernumerary mandibular molars, who was diagnosed with irreversible pulpitis. Both cases were treated successfully in multiple appointments. The common features and treatment modalities are discussed. Failure to diagnose fused/geminated teeth leads to misdiagnosis and a treatment plan that could cause permanent damage and tooth loss. Generally, there is communication between root canal systems of fused/geminated teeth which should be treated as one entity. Use of magnification is an important aid during treatment.

Fused primary first mandibular macromolar with a unique relation to its permanent successors: A rare tooth anomaly

OpenAIRE

Dhindsa, Abhishek; Garg, Shalini; Damle, S. G.; Opal, Shireen; Singh, Tavleen

2013-01-01

Dental anomalies of number and forms may occur in the primary and permanent dentition. Various terms have been used to describe dental twinning anomalies: Germination, fusion, concrescence, double teeth, conjoined teeth, twinned teeth, geminifusion, and vicinifusion. Fused tooth is a developmental anomaly that is seen more frequently in the primary than the permanent dentition. Double tooth involving deciduous anterior teeth is found mostly in the mandible. Very few cases of nonsyndromic doub...

Prevalence, Characteristics, and Complications of Supernumerary Teeth in Nonsyndromic Pediatric Population of South India: A Clinical and Radiographic Study.

Science.gov (United States)

Syriac, Gibi; Joseph, Elizabeth; Rupesh, S; Philip, John; Cherian, Sunu Alice; Mathew, Josey

2017-11-01

Supernumerary teeth are the presence of more number of teeth over the normal dental formula and may occur in permanent as well as early mixed dentition. This study determined the prevalence, characteristics, and complications caused by supernumerary teeth in nonsyndromic South Indian pediatric population. Characteristics of supernumerary teeth determined by clinical and radiographic examination were recorded. The age, sex, number of supernumerary teeth, eruption status, morphology, position, orientation, and complications (if any) associated with supernumerary teeth were recorded for each patient who had supernumerary teeth. The data collected were statistically analyzed. Supernumerary teeth were detected in 45 subjects (1.1%), of which 34 (75.6%) were male and 11 (24.4%) were female. There was no association between the number of supernumerary teeth and the gender of the patient. The total number of supernumerary teeth among the affected 45 patients was 54. The average number of supernumerary teeth per person was 1.2. The number of supernumerary teeth was one in 35 cases, two in 8 cases, and 3 in 1 case. Of the 45 patients, 8 patients with supernumerary teeth were in deciduous dentition stage, 29 patients were in mixed dentition stage, and 8 patients were in permanent dentition stage. Most supernumerary teeth presented in the anterior maxilla. Morphologically, conical-shaped supernumerary teeth were the most common finding. 68.5% of supernumerary teeth presented with straight orientation and inverted orientation was seen in 24.1%. Complications seen in patients with supernumerary teeth were delayed or noneruption of adjacent tooth malposition or rotation of adjacent teeth, diastema formation, and formation of dentigerous cyst. Supernumerary teeth have an incidence of 1.1% in South Indian population and can cause many complications that can harm the developing occlusion. Knowledge about supernumerary teeth may help the dentist in early diagnosis and early

Multidisciplinary management of multiple maxillary anterior supernumerary teeth: a case report.

Science.gov (United States)

Kulkarni, Vinaya Kumar; Reddy, Sampath; Duddu, Mahesh; Reddy, Deepti

2010-03-01

Supernumerary teeth are a relatively frequent disorder of odontogenesis. They may occur alone or in multiple; be unilateral or bilateral; and appear in the maxilla, mandible, or both. Mesiodens is a supernumerary tooth in the anterior maxilla between the two central incisors. This case report describes the treatment of maxillary central incisors displaced and impacted because of the presence of four mesiodens in a 12-year-old boy. After clinical and radiographic examination, surgical removal of the mesiodens and exposure of the maxillary right central incisor was performed. This resulted in a 14-mm space between the displaced central incisors. Successively, fixed orthodontic treatment was planned with cephalometric analysis. The central incisors were brought to the occlusal plane and aligned, and the space between the incisors was redistributed. Remaining minor spaces between the incisors were closed with composite resin buildup.

A study of tooth number anomaly using panoramic radiographs

International Nuclear Information System (INIS)

Park, Sang Eok; Choi, Karp Shik

1992-01-01

The purpose of this study was to evaluate the prevalence and distribution of tooth number anomaly by means of the analysis of panoramic radiographs in 6,531 patients visited the Dental Infirmary of Kyungpook National University Hospital from January 1983 to May 1992 . The results were as follows : 1. The prevalence of congenitally missing teeth except third molar was revealed to be 10.8%, and there was a higher prevalence in females (44.6%) than in males (55.4%). Mandibular 2nd premolars (23.2%), and maxillary second primolars (15.4%) in descending order of frequency. As to the number of congentally missing teeth, the percentage of missing one tooth was 48%, missing two teeth was 35.4%, missing three teeth was 6.6%. 2. The prevalence of congenitally missing third molars was revealed to be 39.7%. There was a higher prevalence in the maxilla (60.3%) than in the mandible (39.7%). Maxillary right 3rd molars (30.6%) were absent most frequently, followed by maxillary left 3rd molar (29.7%), mandibular right 3rd molar (20.2%), mandibular left 3rd molar (19.5%) in descending order of frequency. 3. The prevalence of supernumerary teeth was revealed to be 4.2%, and there was a higher prevalence in the males (65.7%) than in females (34.3%). They were found most frequently in maxillary central incesor area (64.8%), followed by maxillary lateral incisor area (13.2%), posterior area of maxillary third molar (8.7%) in descending order of frequency. As to the number of supernumerary teeth; the percentage of one supernumerary tooth was 79.9%, two supernumarary teeth was 8.9%, three supernumerary teeth was 1.2%.

Bilateral supernumerary primary maxillary canines

Directory of Open Access Journals (Sweden)

Santanu Mukhopadhyay

2018-01-01

Full Text Available Supernumerary teeth are more common in the permanent than in primary dentition. In the primary dentition, the anomaly is most frequently observed in the maxillary lateral incisor region, followed by the maxillary midline where they are termed as mesiodens. Supernumerary teeth in the primary canine region are rare. This paper describes a rare case of nonsyndromic supernumerary primary maxillary canine distributed bilaterally in a 4-year-old boy. Both the supernumeraries resembled size and shape of normal primary canine. The right supplemental canine is high labially placed, whereas the left one is seen normally aligned in the dental arch distal to lateral incisor. One of the most significant sequelae of primary supernumerary teeth is their duplication in the permanent series. Radiographic examination of supernumerary primary canine did not indicate any such anomaly in the permanent dentition. The patient was kept under observation.

A rare case of impacted supernumerary premolar causing resorption of mandibular first molar

Directory of Open Access Journals (Sweden)

R V Murali

2015-01-01

Full Text Available The management of patients with pain in today′s general practice has become a major concern and sometimes this pain is related to some rare causes. A male patient aged 26 years reported with pain in the lower left molar region (36 and then an intra-oral periapical radiograph (IOPA, and orthopantomograph was taken. IOPA revealed the presence of supernumerary premolar causing pressure and root resorption of 36. Also, there was missing 21 and proximal decay in 11. Eleven was treated endodontically, and then bridge was done in relation to 11, 21 and 22. Lower anterior crowding was also present. The treatment plan was to extract 36 followed by orthodontic extrusion of the supernumerary premolar and also the correction of lower anterior crowding. Hidden approach (lingual orthodontics was used as the patient was insisting upon the braces not being seen outside during the course of the treatment. Later all ceramic bridge was done in relation to 11, 21 and 22. Orthodontic tooth extrusion techniques offer excellent treatment options for Partially Impacted tooth. It is a well-documented clinical method for extruding sound tooth material from within the alveolar socket by light forces. The use of lingual technique for forced eruption enhance acceptance of orthodontic treatment by adults. The treatment of a young adult patient illustrates the importance of treatment planning from one discipline to another, communication among team members and the benefits of working together in an interdisciplinary approach

Supernumerary teeth in non-syndromic patients

International Nuclear Information System (INIS)

Mali, Santosh; Karjodkar, Freny Rashmiraj; Sontakke, Subodh; Sansare, Kaustubh

2012-01-01

Hyperdontia or supernumerary teeth without associated syndrome is a rare phenomenon, as supernumerary teeth are usually associated with cleft lip and palate or other syndromes such as Gardner's syndrome, cleidocranial dysplasia, and so on. Five patients with supernumerary teeth visited our department. They had no familial history or other pathology, certain treatment protocols was modified due to the presence of supernumerary teeth. Non-syndromic supernumerary teeth, if asymptomatic, need to have periodical radiographic observation. If they showed no variation as they impacted in the jaw, careful examination is necessary because they may develop into pathological status such as dentigerous cysts. The importance of a precise clinical history and radiographic examination for patients with multiple supernumerary teeth should be emphasized.

Fusión de un tercer molar mandibular con un cuarto molar supernumerario Fusion of mandibular third molar with supernumerary fourth molar

Directory of Open Access Journals (Sweden)

C. López Carriches

2008-10-01

Full Text Available La fusión dental es la unión de dos gérmenes dentales normalmente separados, mientras que la geminación se define como el intento de división de un único germen dental. La fusión y geminación de molares es poco frecuente en la dentición permanente. Describimos un caso clínico de un tercer molar inferior derecho fusionado a un cuarto molar supernumerario en un paciente varón de 36 años que ha presentado repetidos episodios de pericoronaritis. Tras el estudio radiológico se realiza la exodoncia del cordal semiincluido bajo anestesia local. Llevamos a cabo una revisión bibliográfica al respecto.Dental fusion is the union of two tooth buds that normally are separated, while gemination is defined as an attempt by a single tooth bud to divide. The fusion and gemination of molars is uncommon in permanent teeth. We report a clinical case of a right lower third molar fused to a supernumerary fourth molar in a 36-year-old male patient with repeated episodes of inflammation. After the radiologic study, the semi-impacted third molar was extracted under local anesthesia. The literature was reviewed.

Supernumerary teeth in non-syndromic patients

Energy Technology Data Exchange (ETDEWEB)

Mali, Santosh; Karjodkar, Freny Rashmiraj; Sontakke, Subodh; Sansare, Kaustubh [Nair Hospital Dental College, Maharashtra (India)

2012-03-15

Hyperdontia or supernumerary teeth without associated syndrome is a rare phenomenon, as supernumerary teeth are usually associated with cleft lip and palate or other syndromes such as Gardner's syndrome, cleidocranial dysplasia, and so on. Five patients with supernumerary teeth visited our department. They had no familial history or other pathology, certain treatment protocols was modified due to the presence of supernumerary teeth. Non-syndromic supernumerary teeth, if asymptomatic, need to have periodical radiographic observation. If they showed no variation as they impacted in the jaw, careful examination is necessary because they may develop into pathological status such as dentigerous cysts. The importance of a precise clinical history and radiographic examination for patients with multiple supernumerary teeth should be emphasized.

Primary cilia regulate Shh activity in the control of molar tooth number

Czech Academy of Sciences Publication Activity Database

Ohazama, A.; Haycraft, C. J.; Seppala, M.; Ghafoor, S.; Cobourne, M.; Martinelli, D. C.; Fan, CH. M.; Peterková, Renata; Lesot, H.; Yoder, B. K.; Sharpe, P. T.

2009-01-01

Roč. 136, č. 6 (2009), s. 897-903 ISSN 0950-1991 R&D Projects: GA ČR GA304/07/0223; GA MŠk OC B23.002 Institutional research plan: CEZ:AV0Z50390512 Keywords : intraflagellar transport * supernumerary tooth * tooth development Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 7.194, year: 2009

Supernumerary Kidney Associated with Horseshoe Malformation: A Case Report and Review of Literature

Directory of Open Access Journals (Sweden)

Hassan Jamshidian

2017-02-01

Full Text Available We report a case of supernumerary kidney associated with horseshoe malformation. A 35-year-old man presented complaining of vague and intermittent left flank pain from few months ago. Ultrasonography of urinary tract showed bilateral hydronephrosis and was suggestive of the horseshoe anomaly. Further evaluation with Intravenous urography showed three renal moieties consisting of a horseshoe kidney and a malrotated right kidney cephalad to and fused with the right moiety of horseshoe kidney.

Caries, Periodontal Disease, Supernumerary Teeth and Other Dental Disorders in Swedish Wild Boar (Sus scrofa).

Science.gov (United States)

Malmsten, A; Dalin, A-M; Pettersson, A

2015-07-01

Between January and December 2013, the dental and periodontal health of 99 Swedish wild boars (Sus scrofa) was investigated. Sampling occurred in conjunction with routine hunting at six large estates in the southern and middle parts of Sweden. All six of the estates use supplemental feeding. The weight of the animals, their sex and their dates of death were noted. Age was estimated using tooth eruption and tooth replacement patterns. The oral cavity was inspected and abnormalities were recorded on a dental chart modified for wild boars. The findings included supernumerary teeth, absence of teeth, mild class II malocclusion, severe tooth wear, periodontitis, calculus, caries, tooth fractures and the presence of enamel defects. Swedish wild boars suffer from different dental lesions and the impact of supplemental feeding on dental and periodontal health is still to be investigated. Copyright © 2015 Elsevier Ltd. All rights reserved.

Platelet-rich fibrin-mediated revitalization of immature necrotic tooth

Directory of Open Access Journals (Sweden)

Navin Mishra

2013-01-01

Full Text Available Contemporary studies have shown that the regeneration of tissues and root elongation is possible in necrotic immature permanent teeth. The purpose of this case report is to add a new vista in regenerative endodontic therapy by using platelet rich fibrin for revitalization of immature non vital tooth. An 11year old boy with the history of trauma was diagnosed with the pulpal necrosis and symptomatic apical periodontitis in tooth #21. Intra oral periapical radiograph showed open apex and associated immature supernumerary tooth with respect to tooth #21. Access preparation and minimal instrumentation was done to remove necrotic debris under copious irrigation with 2.5% sodium hypochlorite. Triple antibiotic paste was packed in the canal for four weeks. During second visit, 5 mL of whole blood was drawn from the medial cubital vein of the patient and blood was then subjected to centrifugation at 2400 rpm for 12 minutes for the preparation of Platelet rich fibrin (PRF utilizing Choukroun′s method. Triple antibiotic paste was removed and canal was dried. PRF clot was pushed to the apical region of tooth #21 using hand pluggers. Three milimetres of Mineral trioxide (MTA was placed in cervical part of the root canal and permanent restoration was done three days later. Clinical examination at 6 and 12 months revealed no sensitivity to percussion and palpation in tooth #21and it responded positively to both electric pulp and cold tests. Radiographic examination showed resolution of periapical rarefaction, further root development and apical closure of the tooth #21 and its associated supernumerary tooth. On the basis of successful outcome of the present case it can be stated that PRF clot may serve as a scaffold for regeneration of necrotic immature teeth.

Simultaneous Occurrence of Dens Invaginatus and Fusion

Directory of Open Access Journals (Sweden)

Amit Mhapuskar

2013-01-01

Full Text Available Although Dens invaginatus and fusion are well-known and well established dental anomalies, they are rarely seen in supernumerary teeth. In this article, simultaneous occurrence of Dens invaginatus and fusion between maxillary lateral incisor and a supernumerary tooth is described. Dens invaginatus is clinically significant due to the possibility of the pulpal involvement; pulpitis, necrotic pulps and chronic periapical lesions are often associated with this anomaly without clinical symptoms. Fusion has a negative impact on the aesthetics, especially when it occurs in maxillary anterior teeth. It is difficult to clinically make differential diagnosis between fused teeth and geminated teeth, especially when these anomalies take place together with hypodontia or supernumerary tooth. It has been found that sequel of such teeth may result in delayed eruption, ectopic eruption or even impaction of permanent teeth; hence proper diagnosis by clinical and radiographic methods and intervention at appropriate time is of paramount importance. The accurate knowledge of variations in morphology of tooth and pulp cavity greatly assists the dentist in planning successful treatment options.

Bilateral Supernumerary Kidney: A Very Rare Presentation

International Nuclear Information System (INIS)

Keskin, Suat; Batur, Abdussamet; Keskin, Zeynep; Koc, Abdulkadir; Firat Ozcan, Irfan

2014-01-01

To our knowledge, bilateral supernumerary kidney is a very rare renal abnormality and there are five cases presented in the literature. It is difficult to diagnose supernumerary kidney and clinicians have not detected most cases preoperatively. Laboratory and imaging studies were acquired and carefully examined. The normal laboratory tests were found. Emergency ultrasonography was performed and they revealed no signs of parenchymal abnormality in both kidneys. Serial imaging study including enhanced computed tomography (CT) was performed. An imaging study identified bilateral supernumerary kidney with expanded collecting systems. On each side, significant rotation anomaly was found. In addition, there were two different renal arteries originating from the aorta. This report presents radiological determinations of supernumerary kidney bilaterally in a young man. We think that CT commonly appears to be enough for the diagnosis of supernumerary kidneys

Bilateral Supernumerary Kidney: A Very Rare Presentation

Science.gov (United States)

Keskin, Suat; Batur, Abdussamet; Keskin, Zeynep; Koc, Abdulkadir; Firat Ozcan, Irfan

2014-01-01

To our knowledge, bilateral supernumerary kidney is a very rare renal abnormality and there are five cases presented in the literature. It is difficult to diagnose supernumerary kidney and clinicians have not detected most cases preoperatively. Laboratory and imaging studies were acquired and carefully examined. The normal laboratory tests were found. Emergency ultrasonography was performed and they revealed no signs of parenchymal abnormality in both kidneys. Serial imaging study including enhanced computed tomography (CT) was performed. An imaging study identified bilateral supernumerary kidney with expanded collecting systems. On each side, significant rotation anomaly was found. In addition, there were two different renal arteries originating from the aorta. This report presents radiological determinations of supernumerary kidney bilaterally in a young man. We think that CT commonly appears to be enough for the diagnosis of supernumerary kidneys. PMID:25780543

Non-syndromic multiple impacted supernumerary teeth with peripheral giant cell granuloma

Directory of Open Access Journals (Sweden)

Pankaj Bansal

2011-01-01

Full Text Available Peripheral giant cell granuloma (PGCG is a relatively frequent benign reactive lesion of the gingiva, originating from the periosteum or periodontal membrane following local irritation or chronic trauma. PGCG manifests as a red-purple nodule located in the region of the gingiva or edentulous alveolar margins. The lesion can develop at any age, although it is more common between the second and third decades of life, and shows a slight female predilection. PGCG is a soft tissue lesion that very rarely affects the underlying bone, although the latter may suffer superficial erosion. A supernumerary tooth is one that is additional to the normal series and can be found in almost any region of the dental arch. These teeth may be single, multiple, erupted or unerupted and may or may not be associated with syndrome. Usually, they cause one or the other problem in eruption or alignment of teeth, but may also present without disturbing the normal occlusion or eruption pattern. Management of these teeth depends on the symptoms. Presented here is a case of PGCG in relation to the lower left permanent first molar with three supernumerary teeth in the mandibular arch but no associated syndrome.

Non-syndrome multiple supernumerary teeth in Nigerians.

Science.gov (United States)

Umweni, A A; Osunbor, G E N

2002-09-01

The present study was carried out to ascertain frequency of multiple supernumerary teeth not associated with syndrome in Nigerians. A total of 13 patients comprising of 10 males (76.92%) and 3 female (23.07%) representing 0.098% of the study population had multiple supernumerary teeth. Multiple supernumerary teeth without any associated systemic diseases or syndrome are rare as reported by BLUMENTHAL (3) RUHLMAN and NEELY (17), KANTOR et al. (10) is not the case in this study. The maxillary region has the highest frequency of occurrence with 12 times (66.67%) followed by the mandibular premolar region with 4 times (22.22%) while maxillary premolar and mandibular anterior region shared (5.55%) respectively. The conical and tuberculate types of supernumerary teeth were found in the midline region, while the supplemental supernumerary teeth were more in the mandibular premolar region with 12 (70.58%) follow by maxillary midline 4 (23.52%) and the lower incisor region 1 (5.88%) which is in consonant with WINTER and BROOK (2), STAFNE (19) NAZIF, FUTALO ZULLO (15). The role of genetics in the aetiology of multiple supernumerary teeth as found in this study, the occurrence of supernumerary teeth on two brothers and a daughter to one of the affected brothers, tends, to suggest an autosomal dominant mode of inheritance and the challenges to management by the orthodontists are discussed.

The management of premolar supernumeraries in three orthodontic cases.

LENUS (Irish Health Repository)

McNamara, C M

1997-01-01

This paper reviews the incidence, etiology and location of supernumerary teeth with emphasis on premolar supernumeraries and examines the management of supernumerary premolars of three patients undergoing orthodontics. These cases demonstrate that the management of premolars is assessed individually and treatments based on potential complications, which may occur during the orthodontic and surgical management of the dentition. Progress and posttreatment radiographs are recommended for the assessment of late forming supernumerary teeth.

Endodontic Treatment of a Maxillary Second Molar with Developmental Anomaly: A Case Report

OpenAIRE

Asgary, Saeed

2007-01-01

Fusion is a rare occurrence in molar teeth. The purpose of this rare case presentation is to describe the nonsurgical endodontic treatment of maxillary molar. A 28-year-old patient was referred for endodontic treatment of her chronic apical abscess of right maxillary second molar. In the clinical examination, a sinus tract adjacent to involved tooth and a small crown of supernumerary tooth fused to the buccal surface of the molar at gingival margin was observed. Endodontic treatment was decid...

Vitality preservation of an anomalous maxillary central incisor after endodontic therapy.

Science.gov (United States)

Kaufman, A Y; Kaffe, I; Littner, M M

1984-06-01

Endodontic treatment of a case of fused immature central incisor with a supernumerary tooth with dens in dente is described. Although a chronic dentoalveolar abscess was diagnosed, vitality test signs were positive. Treatment consisted of pulpotomy with calcium hydroxide paste; after 2 1/2 months a permanent root canal filling was placed in the amputated part. Follow-up 2 years postoperatively indicated that the tooth has maintained its vitality. The periapical area is completely healed, and apical closure is evident.

Fibroadenoma in axillary supernumerary breast: case report

Directory of Open Access Journals (Sweden)

Délio Marques Conde

Full Text Available CONTEXT: Supernumerary breast tissue may be affected by the same diseases and alterations that compromise topical breast tissue. Nevertheless, reports of fibroadenoma in supernumerary breast tissue in the axillae are rare. OBJECTIVE: To describe a case of fibroadenoma in an axillary supernumerary breast. DESIGN: Case report. CASE REPORT: A 39-year-old woman was referred to the gynecology and obstetrics outpatient clinic at Hospital Estadual Sumaré, complaining of bilateral axillary masses. The patient reported cosmetic problems and local pain and discomfort. On physical examination, alterations compatible with bilateral axillary accessory breasts, without palpable nodules, were observed. Supplementary examinations (mammography and ultrasonography revealed a 1.1 cm mass in the right axillary breast. The patient underwent resection of the supernumerary breasts and histopathological examination revealed fibroadenoma of the right axillary breast tissue.

The effects of impacted premaxillary supernumerary teeth on permanent incisors

Energy Technology Data Exchange (ETDEWEB)

Jung, Yun Hoa; Kim, Ji Yeon; Cho, Bong Hae [School of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

2016-12-15

The aim of this study was to examine the radiographic features associated with impacted premaxillary supernumerary teeth, to determine the relationship between their characteristics and their effects on permanent incisors, and to investigate the types of orthodontic treatment that patients received after the extraction of impacted supernumerary teeth. The clinical records and radiographs of 193 patients whose impacted premaxillary supernumerary teeth were removed were retrospectively reviewed, and 241 impacted supernumerary teeth were examined. Cone-beam computed tomographic images and panoramic radiographs were examined to determine the number, location, sagittal position, orientation, and morphology of the supernumerary teeth. Their effects on permanent incisors and the orthodontic treatment received by patients after the extraction of the supernumeraries were also investigated. Supernumerary teeth were most frequently observed in the central incisor region, in the palatal position, in the inverted orientation, and were most commonly conical in shape. The most common complication was median diastema, followed by displacement and delayed eruption of the adjacent incisors. Ten (71.4%) of the 14 odontomas showed delayed eruption of the adjacent incisors. Displacement of the incisors was more frequently observed in association with supernumerary teeth with tuberculate or supplemental shapes. Orthodontic traction was most frequently performed after the removal of odontomas. In 32 cases (13.3%), permanent incisors erupted after the orthodontic creation of sufficient space. Median diastema was most common complication. The delayed eruption of incisors was common in supernumerary teeth with a vertical orientation and an odontoma shape.

The effects of impacted premaxillary supernumerary teeth on permanent incisors

International Nuclear Information System (INIS)

Jung, Yun Hoa; Kim, Ji Yeon; Cho, Bong Hae

2016-01-01

The aim of this study was to examine the radiographic features associated with impacted premaxillary supernumerary teeth, to determine the relationship between their characteristics and their effects on permanent incisors, and to investigate the types of orthodontic treatment that patients received after the extraction of impacted supernumerary teeth. The clinical records and radiographs of 193 patients whose impacted premaxillary supernumerary teeth were removed were retrospectively reviewed, and 241 impacted supernumerary teeth were examined. Cone-beam computed tomographic images and panoramic radiographs were examined to determine the number, location, sagittal position, orientation, and morphology of the supernumerary teeth. Their effects on permanent incisors and the orthodontic treatment received by patients after the extraction of the supernumeraries were also investigated. Supernumerary teeth were most frequently observed in the central incisor region, in the palatal position, in the inverted orientation, and were most commonly conical in shape. The most common complication was median diastema, followed by displacement and delayed eruption of the adjacent incisors. Ten (71.4%) of the 14 odontomas showed delayed eruption of the adjacent incisors. Displacement of the incisors was more frequently observed in association with supernumerary teeth with tuberculate or supplemental shapes. Orthodontic traction was most frequently performed after the removal of odontomas. In 32 cases (13.3%), permanent incisors erupted after the orthodontic creation of sufficient space. Median diastema was most common complication. The delayed eruption of incisors was common in supernumerary teeth with a vertical orientation and an odontoma shape

Endodontic therapy for a fused mandibular molar.

Science.gov (United States)

Rotstein, I; Moshonov, J; Cohenca, N

1997-06-01

Variations in tooth morphology present a clinical challenge when endodontic treatment is required. A case of conservative endodontic therapy for a fused mandibular second and third molar is presented.

Bilaterally impacted mandibular supernumerary premolars associated with unusual clinical complications

Directory of Open Access Journals (Sweden)

Zameer Pasha

2013-01-01

Full Text Available Supernumerary teeth are extra teeth in comparison to the normal dentition. Their prevalence varies between 0.1% and 3.8%. Supernumeraries are more common in permanent dentition and its incidence is higher in maxillary incisor region, followed by maxillary third molar and mandibular molar, premolar, canine, and lateral incisor. The prevalence of supernumerary premolars is between 0.075-0.26%, and they may occur in single or multiple numbers Bilateral occurrence is uncommon and large percentage of supernumerary premolars remains impacted, unerupted, and usually asymptomatic; radiograph plays an important role in diagnosis of these. The present paper reports a case of bilaterally impacted completely developed supernumerary premolars associated with common clinical complication in unusual manner along with taurodontism of the upper and lower molars.

Endodontic management of maxillary second molars fused with paramolar tubercles diagnosed by cone beam computed tomography - two case reports.

Directory of Open Access Journals (Sweden)

Preetham Jain

2014-12-01

Full Text Available The main objective of nonsurgical endodontic treatment is to eliminate micro-organisms from the root canal system. Adequate knowledge of the root canal morphology and its complexities is essential to render successful endodontic treatment. Variations in tooth form and morphology may be found in the form of anomalous cusps in the crown region or additional roots. In permanent molars, changes in the crown morphology may occur either in the form of an additional tooth (paramolar or supernumerary cusp termed as "paramolar tubercle".

Endodontic treatment of a maxillary second molar with developmental anomaly: a case report.

Science.gov (United States)

Asgary, Saeed

2007-01-01

Fusion is a rare occurrence in molar teeth. The purpose of this rare case presentation is to describe the nonsurgical endodontic treatment of maxillary molar. A 28-year-old patient was referred for endodontic treatment of her chronic apical abscess of right maxillary second molar. In the clinical examination, a sinus tract adjacent to involved tooth and a small crown of supernumerary tooth fused to the buccal surface of the molar at gingival margin was observed. Endodontic treatment was decided for the involved molar for functional reason. Recall examination, a year after completion of endodontic and restorative treatments, showed the tooth was clinically asymptomatic and there was no radiographic lucency around the apical region.

Supernumerary teeth in primary dentition and early intervention: a series of case reports.

Science.gov (United States)

Bahadure, Rakesh N; Thosar, Nilima; Jain, Eesha S; Kharabe, Vidhi; Gaikwad, Rahul

2012-01-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition. Mesiodens is the most common type of supernumerary teeth but rarely seen in lower arch. Early recognition and diagnosis of supernumerary teeth is important to prevent further complications in permanent dentition. Four cases of supernumerary teeth with mesiodens in upper and lower arch in primary dentition and their management have been discussed.

Supernumerary Teeth in Primary Dentition and Early Intervention: A Series of Case Reports

Directory of Open Access Journals (Sweden)

Rakesh N. Bahadure

2012-01-01

Full Text Available Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition. Mesiodens is the most common type of supernumerary teeth but rarely seen in lower arch. Early recognition and diagnosis of supernumerary teeth is important to prevent further complications in permanent dentition. Four cases of supernumerary teeth with mesiodens in upper and lower arch in primary dentition and their management have been discussed.

Eruption of supernumerary permanent teeth in a sample of urban primary school population in Genoa, Italy.

Science.gov (United States)

Alberti, G; Mondani, P M; Parodi, V

2006-06-01

The aim of this epidemiological study was to describe the incidence and distribution of hyperdontia in the primary school population in Genoa (Italy) and to check its influence on the development of orthodontic problems in children. The collected data should also help to find out what is the best age range among children to direct a program for early diagnosis and prevention of malocclusion and oral diseases related to hyperdontia. The participating children (total number 1577, 814 males and 763 females, between 6 and 10 years of age) chosen in 19 public primary schools in Genoa have been examined by the same specialist through year 2004. Erupted permanent teeth, presence, position and form of supernumerary teeth, malocclusion presence and class, presence of orthodontic devices, age and sex have been noted down for each child. The global percentage of hyperdontia was 0.38%, more frequent in males (0.49%) than in females (0.26%). The most common kind of supernumerary tooth was mesiodens (83%). A significant increase of hyperdontia prevalence (from 0.64% to 1.06%) was noticed in children 9 years old. The incidence of malocclusion among children presenting hyperdontia was 83.3%, while the global incidence of malocclusion was 40%. An orthodontic treatment had been planned and started for 20% of children presenting malocclusion. The study has revealed an incidence of hyperdontia much more frequent in males than in females (2:1). The most common site of eruption of supernumerary teeth is maxillary anterior region. Hyperdontia is strictly related with dental malocclusion. The best age range to direct a program of early diagnosis and prevention of malocclusion and hyperdontia is 9 years old children.

Nonsurgical endodontic retreatment of fused teeth with transposition: a case report

Directory of Open Access Journals (Sweden)

Miguel Agostinho Beco Pinto Cardoso

2016-05-01

Full Text Available Tooth transposition is a disorder in which a permanent tooth develops and erupts in the normal position of another permanent tooth. Fusion and gemination are developmental disturbances presenting as the union of teeth. This article reports the nonsurgical retreatment of a very rare case of fused teeth with transposition. A patient was referred for endodontic treatment of her maxillary left first molar in the position of the first premolar, which was adjacent to it on the distobuccal side. Orthopantomography and periapical radiography showed two crowns sharing the same root, with a root canal treatment and an associated periapical lesion. Tooth fusion with transposition of a maxillary molar and a premolar was diagnosed. Nonsurgical endodontic retreatment was performed. At four yr follow-up, the tooth was asymptomatic and the radiolucency around the apical region had decreased, showing the success of our intervention. The diagnosis and treatment of fused teeth require special attention. The canal system should be carefully explored to obtain a full understanding of the anatomy, allowing it to be fully cleaned and obturated. Thermoplastic techniques were useful in obtaining hermetic obturation. A correct anatomical evaluation improves the set of treatment options under consideration, leading to a higher likelihood of esthetically and functionally successful treatment.

Identification of supernumerary ring chromosome 1 mosaicism using fluorescence in situ hybridization.

Science.gov (United States)

Chen, H; Tuck-Muller, C M; Batista, D A; Wertelecki, W

1995-03-27

We report on a 15-year-old black boy with severe mental retardation, multiple congenital anomalies, and a supernumerary ring chromosome mosaicism. Fluorescence in situ hybridization with a chromosome 1 painting probe (pBS1) identified the ring as derived from chromosome 1. The karyotype was 46,XY/47,XY,+r(1)(p13q23). A review showed 8 reports of ring chromosome 1. In 5 cases, the patients had a non-supernumerary ring chromosome 1 resulting in partial monosomies of the short and/or long arm of chromosome 1. In 3 cases, the presence of a supernumerary ring resulted in partial trisomy of different segments of chromosome 1. In one of these cases the supernumerary ring was composed primarily of the centromere and the heterochromatic region of chromosome 1, resulting in normal phenotype. Our patient represents the third report of a supernumerary ring chromosome 1 resulting in abnormal phenotype.

Multiple supernumerary teeth and odontoma in the maxilla: A case report

Directory of Open Access Journals (Sweden)

P B Sood

2010-01-01

Full Text Available Most supernumerary impacted teeth are located in the anterior maxillary region. They are classified according to their form and location. Their presence may give rise to a variety of clinical problems. The detection of supernumerary teeth is best achieved by thorough clinical and radiographic examination. Their management should form part of a comprehensive treatment plan. This article presents an overview of the diagnostic problems associated with multiple supernumerary impacted teeth and includes a discussion of the classification, diagnosis, and management of this difficult clinical entity.

Mesenchymal Wnt/β-catenin signaling limits tooth number.

Science.gov (United States)

Järvinen, Elina; Shimomura-Kuroki, Junko; Balic, Anamaria; Jussila, Maria; Thesleff, Irma

2018-02-21

Tooth agenesis is one of the predominant developmental anomalies in humans, usually affecting the permanent dentition generated by sequential tooth formation and, in most cases, caused by mutations perturbing epithelial Wnt/β-catenin signaling. In addition, loss-of-function mutations in the Wnt feedback inhibitor AXIN2 lead to human tooth agenesis. We have investigated the functions of Wnt/β-catenin signaling during sequential formation of molar teeth using mouse models. Continuous initiation of new teeth, which is observed after genetic activation of Wnt/β-catenin signaling in the oral epithelium, was accompanied by enhanced expression of Wnt antagonists and a downregulation of Wnt/β-catenin signaling in the dental mesenchyme. Genetic and pharmacological activation of mesenchymal Wnt/β-catenin signaling negatively regulated sequential tooth formation, an effect partly mediated by Bmp4. Runx2 , a gene whose loss-of-function mutations result in sequential formation of supernumerary teeth in the human cleidocranial dysplasia syndrome, suppressed the expression of Wnt inhibitors Axin2 and Drapc1 in dental mesenchyme. Our data indicate that increased mesenchymal Wnt signaling inhibits the sequential formation of teeth, and suggest that Axin2 / Runx2 antagonistic interactions modulate the level of mesenchymal Wnt/β-catenin signaling, underlying the contrasting dental phenotypes caused by human AXIN2 and RUNX2 mutations. © 2018. Published by The Company of Biologists Ltd.

Gemination or fusion? - challenge for dental practitioners (case study).

Science.gov (United States)

Chipashvili, N; Vadachkoria, D; Beshkenadze, E

2011-05-01

Gemination and fusion are anomalies in size, shape and structure of teeth. Gemination more frequently affects the primary teeth, but it may occur in permanent dentitions, usually in the incisor region. Geminated teeth are typically disfigured in appearance due to irregularities of the enamel. Fused teeth can have separated pulpal space, one pulp chamber and two canals or take the form of a large bifid crown with one pulpal space. It is hard to differentiate between fusion and gemination, especially if the supernumerary tooth bud is fused with the adjacent one. Usually, fusion may be differentiated from germination by a reduced number of teeth. An exception is in the unusual case in which the fusion is between a supernumerary tooth and normal tooth. A 20-year-old male referred to us at - "UniDent" - Dental Clinic, Training and Research Center. The patient complained about the large, unusual maxillary central incisors, lip irritation and aesthetic problems. According clinical examination and radiological findings, clinical diagnose was - bilateral germination of central incisors. Several treatment methods have been described in the literature with respect to the different types and morphological variations of fused and geminated teeth, including endodontic, direct\\indirect restorative, surgical, periodontal and/or orthodontic treatment. Our patient has demanded for better aesthetics and he choose the treatment option to make two separate PFM crowns. In the beginning of treatment, the length of tooth 11 was 9.5mm, after prosthodontic treatment it has become 11.5mm. For tooth 21, it was 9.9 millimeter and became - 10.8 mm, while the primary width of right central incisor appeared 13.2 millimeter and was narrowed until 10.8 mm. 12.8 mm was the - width of left central incisor, which finally became - 10.4 mm. Despite the considerable number of cases reported in the literature, the differential diagnosis between these abnormalities is very difficult, as well as, to find

Genetics and presence of non-syndromic supernumerary teeth: A mystery case report and review of literature

Directory of Open Access Journals (Sweden)

Neha Khambete

2012-01-01

Full Text Available Presence of supernumerary teeth is well-recognized clinical phenomenon. However, it is uncommon to find multiple supernumeraries in individuals with no other associated disease or syndrome. Presence of multiple supernumerary teeth is thought to have genetic component. We report a rare case where multiple supernumerary teeth were seen without presence of any other syndrome in 3 generations; father, son, and two grandsons. We also present a review of similar cases published in literature till date. The role of genetics in development of supernumerary teeth is highlighted.

Supernumerary Teeth in Primary Dentition and Early Intervention: A Series of Case Reports

OpenAIRE

Bahadure, Rakesh N.; Thosar, Nilima; Jain, Eesha S.; Kharabe, Vidhi; Gaikwad, Rahul

2012-01-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition. Mesiodens is the most common type of supernumerary teeth but rarely seen in lower arch. Early recognition and diagnosis of supernume...

Canaliculitis in supernumerary puncta and canaliculi

Directory of Open Access Journals (Sweden)

Ku Chui Yong

2011-08-01

Full Text Available We report the first case of supernumerary puncta and canaliculi presented with canaliculitis. A-59 year-old gentleman presented with painful swelling of the left lower lid for a week, which was associated with epiphora. The swelling was confined to the nasal aspect of the left lower lid (0.5¥0.5 mm with inflamed overlying skin. Two puncta (0.5 mm apart were noted. The outer punctum at the normal anatomical position was a cul-de-sac while the inner punctum it the caruncle was patent. We described the embryology leading to supernumerary puncta and canaliculi to explain the paradoxical patency of the abnormally located punctum as well as the pathomechanism leading to canaliculitis. The patient was treated with oral cloxacillin 500 mg, 6 hourly for 5 days; the cellulitis subsided after three days.

Canaliculitis in supernumerary puncta and canaliculi.

Science.gov (United States)

Yong, Ku Chui; Kah, Tan Aik; Annuar, Faridah Hanom

2011-07-01

We report the first case of supernumerary puncta and canaliculi presented with canaliculitis. A-59 year-old gentleman presented with painful swelling of the left lower lid for a week, which was associated with epiphora. The swelling was confined to the nasal aspect of the left lower lid (0.5×0.5 mm) with inflamed overlying skin. Two puncta (0.5 mm apart) were noted. The outer punctum at the normal anatomical position was a cul-de-sac while the inner punctum it the caruncle was patent. We described the embryology leading to supernumerary puncta and canaliculi to explain the paradoxical patency of the abnormally located punctum as well as the pathomechanism leading to canaliculitis. The patient was treated with oral cloxacillin 500 mg, 6 hourly for 5 days; the cellulitis subsided after three days.

Triunity of mandibular deciduous anteriors: A rarity in morphology

Directory of Open Access Journals (Sweden)

Kenchappa Mallikarjun

2016-01-01

Full Text Available An uncommon developmental anomaly such as a triple tooth may result from fusion, gemination, or concrescence that may occur between two and more teeth or between normal tooth and a supernumerary tooth. This anomaly may occur as a result of conjoining or twining defects that affect both primary and permanent dentition. In this article, we report an unusual case of triplication of primary teeth occurring unilaterally between the lower left lateral incisor and the canine, where the lateral incisor is geminated and it is fused to the canine. The triple tooth was extracted under local anesthesia and its crown portion was sectioned at three levels that are coronal, middle, and cervical one-third, respectively, following which, the sections were observed under a stereomicroscope. Based on the clinical and histologic findings, final diagnosis of gemination of lateral incisor with fusion to the canine is confirmed.

Prevalence rate of supernumerary teeth among non-syndromic South Indian population: An analysis

Directory of Open Access Journals (Sweden)

M Nazargi Mahabob

2012-01-01

Full Text Available Aim: Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stage. The main objective of the study was to determine the prevalence rate of supernumerary teeth in the patients who reported to the Department of Oral Medicine and Radiology and to study the associated clinical complications. Materials and Methods: A longitudinal observational study was conducted of 2216 patients for a period of 4 months with the documentation of demographic data, the presence of supernumerary teeth, their location, and associated complications such as mechanical trauma, dental caries, and associated pathology. Results: The study recorded 27 supernumerary teeth from the examined 2216 patients. This yields a prevalence of 1.2%, with greater frequency in males which was 1.49% and in females the frequency was 0.85%. The greatest proportion of supernumerary teeth was found in the maxillary anterior region (77.8%. Out of this, 85.7% were classified as mesiodens based on their location. The displacement of adjacent teeth was the most common finding, followed by dental caries. Conclusion: The prevalence of supernumerary teeth in this study was 1.2% which is in agreement with that reported in similar studies and the maxillary mesiodens was the most common location. Displacement of adjacent teeth was the most common finding.

Interactions between BMP-7 and USAG-1 (uterine sensitization-associated gene-1 regulate supernumerary organ formations.

Directory of Open Access Journals (Sweden)

Honoka Kiso

Full Text Available Bone morphogenetic proteins (BMPs are highly conserved signaling molecules that are part of the transforming growth factor (TGF-beta superfamily, and function in the patterning and morphogenesis of many organs including development of the dentition. The functions of the BMPs are controlled by certain classes of molecules that are recognized as BMP antagonists that inhibit BMP binding to their cognate receptors. In this study we tested the hypothesis that USAG-1 (uterine sensitization-associated gene-1 suppresses deciduous incisors by inhibition of BMP-7 function. We learned that USAG-1 and BMP-7 were expressed within odontogenic epithelium as well as mesenchyme during the late bud and early cap stages of tooth development. USAG-1 is a BMP antagonist, and also modulates Wnt signaling. USAG-1 abrogation rescued apoptotic elimination of odontogenic mesenchymal cells. BMP signaling in the rudimentary maxillary incisor, assessed by expressions of Msx1 and Dlx2 and the phosphorylation of Smad protein, was significantly enhanced. Using explant culture and subsequent subrenal capsule transplantation of E15 USAG-1 mutant maxillary incisor tooth primordia supplemented with BMP-7 demonstrated in USAG-1+/- as well as USAG-1-/- rescue and supernumerary tooth development. Based upon these results, we conclude that USAG-1 functions as an antagonist of BMP-7 in this model system. These results further suggest that the phenotypes of USAG-1 and BMP-7 mutant mice reported provide opportunities for regenerative medicine and dentistry.

Supernumerary impacted teeth in a patient with SOX2 anophthalmia syndrome.

Science.gov (United States)

Numakura, Chikahiko; Kitanaka, Sachiko; Kato, Mitsuhiro; Ishikawa, Shigeo; Hamamoto, Yoshioki; Katsushima, Yuriko; Kimura, Toshiyuki; Hayasaka, Kiyoshi

2010-09-01

SOX2 anophthalmia syndrome characteristically presents as anophthalmia or microphthalmia, with various extraocular symptoms, such as hypogonadotropic hypogonadism, brain anomaly, and esophageal abnormalities. In this report, we describe a patient with SOX2 anophthalmia syndrome complicated with a dental anomaly, multiple supernumerary impacted teeth, and persistence of deciduous teeth. Multiple supernumerary teeth are usually not solitary symptoms, but indicate systemic syndrome such as cleidocranial dysplasia. In odontogenesis, many transcriptional factors, such as BMPs, FGFs, and Wnts, play significant roles and SOX2 is known to interact with some of them. The role of SOX2 in dental development remains unknown, however, multiple supernumerary teeth can be considered as extraocular symptoms of SOX2 anophthalmia syndrome, rather than the coincidence of two rare diseases.

Multidisciplinary management of impacted central incisors due to supernumerary teeth and an associated dentigerous cyst

OpenAIRE

Kalaskar, Ritesh R.; Kalaskar, Ashita R.

2011-01-01

Supernumerary teeth are the most common developmental dental anomaly resulting from hyperactivity of dental lamina, dichotomy, environmental factor, or polygenetic process of atavism. Supernumerary teeth present classical oral complication such as impaction of adjacent teeth, crowding, diastema formation, rotation, displacement of teeth, and occlusal interference. A dentigerous cyst associated with anterior supernumerary teeth (mesiodens) is rare and accounts for 5% of all dentigerous cysts. ...

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

Science.gov (United States)

Sarne, Ofer; Shapira, Yehoshua; Blumer, Sigalit; Finkelstein, Tamar; Schonberger, Shirley; Bechor, Naomi; Shpack, Nir

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

Concrescent triplets involving primary anterior teeth

Directory of Open Access Journals (Sweden)

Urvashi Sharma

2013-01-01

Full Text Available Odontogenesis is a complex process wherein more than 200 genes are known to play a significant role in tooth development. An imbalance can lead to an abnormality in the number, size, shape or structure of the developing tooth/teeth. The presence of an extra dental lamina forms a supernumerary tooth. The supernumerary teeth are of two types: A rudimentary tooth where the supernumerary tooth does not resemble any tooth in the normal series or a supplemental tooth in which this anomalous tooth resembles one in the normal series. It is also very rare to encounter triple teeth in primary dentition. The union of these teeth may be through fusion, gemination, concrescence or a combination of fusion and gemination. Presented is a rare case of concrescence involving maxillary deciduous incisors and a supplemental tooth in a 7-year-old boy. The differential diagnosis, etiology, and complications of primary anterior triple teeth are discussed.

Greyish shadow on the labial gingival margin after insertion porcelain fused to metal crown on anterior teeth

Directory of Open Access Journals (Sweden)

Ike Damayanti Habar

2016-06-01

Full Text Available The crown is the type of restoration that replaces lost tooth structure caused by caries, trauma, or other causes which aims to restore comfort, function and patient confidence. Porcelain fused to metal restorationis an option that dominate the aesthetic restoration crown sand fixed prosthesisover the last 50 years. Porcelain fused to metal crown, consists of porcelain layer bonded to a thin cast metal coping that fits over the tooth preparation. Such a restoration combines the strength  and accurate fit of a cast metal crown with  the cosmetic effect of a porcelain crown. In some cases, it looks greyish shadow on the labial gingival margin after insertion porcelain fused to metal crowns on anterior teeth that can not be hidden even if the placement of the edge in subgingival. The purpose of this case report is to determine the cause of a greyish shadow on the labial gingival margin after insertion porcelain fused to metal crowns on anterior teeth and how to prevent a greyish shadow very disturbing aesthetics of the patient.

Multiple Supernumerary Teeth in a Non-Syndromic Patient: A Case Report

Directory of Open Access Journals (Sweden)

Majid Eshgh Pour

2013-01-01

Full Text Available Introduction: Multiple supernumerary teeth are a rare phenomenon. It occurs more often in patients with syndromes such as Gardner's syndrome, cleidocranial dysplasia and so on. This phenomenon in absence of such syndromes is rare. The purpose of this report was to introduce a case of non-syndromic multiple supernumerary impacted teeth.Case Report: A 29-year-old woman with no skeletal, metabolic, systemic and mental disorder was referred to oral and maxillofacial department of Mashhad dental school. In clinical evaluation, seven Permanent teeth were missing. In radiographic evaluation, there were a total of 15 impacted teeth which 7 of them were supernumerary.Conclusion: Missing or Excess of one or more teeth usually leads to occlusal and functional problems. In these cases, a complete clinical and radiographic examination accompanieal by a precise history should be performed to plan a suitable surgical-orthodontic-prosthetic treatment.

Preoperative localization of supernumerary and ectopic parathyroid glands in patients with secondary hyperparathyroidism

International Nuclear Information System (INIS)

Tominaga, Yoshihiro; Kano, Tadayuki; Tanaka, Yuji; Uchida, Kazuharu; Yamada, Nobuo; Kawai, Machio; Takagi, Hiroshi.

1989-01-01

The undetectable supernumerary and ectopic parathyroid glands have a high risk of persistent and recurrent hyperparathyroidism, especially in the patients with secondary hyperparathyroidism. Preoperative image diagnosis, CT scan, echogram and 201 TlCl scintigram were very useful for detecting supernumerary and ectopic parathyroid glands in our 132 patients who underwent parathyroidectomy for secondary hyperparathyroidism. Among these methods the scintigraphy showed the highest detection rate of the glands located in the thyroid gland and those located between the thyroid gland and trachea. The echography was useful in detecting the glands in the thyroid gland, but could not offer easy visualization those located in the mediastinum. Even the ectopic parathyroid glands, weighing more than 500 mg were identifiable at about 90% when all the methods were applied routinely. In our experience, four patients had a supernumerary gland which was detected by the preoperative image diagnostic procedures at the initial surgery. One patient had a supernumerary gland in the mediastinum which was detected by image diagnosis after the initial operation and was removed at reoperation. (author)

The junctional epithelium originates from the odontogenic epithelium of an erupted tooth.

Science.gov (United States)

Yajima-Himuro, Sara; Oshima, Masamitsu; Yamamoto, Gou; Ogawa, Miho; Furuya, Madoka; Tanaka, Junichi; Nishii, Kousuke; Mishima, Kenji; Tachikawa, Tetsuhiko; Tsuji, Takashi; Yamamoto, Matsuo

2014-05-02

The junctional epithelium (JE) is an epithelial component that is directly attached to the tooth surface and has a protective function against periodontal diseases. In this study, we determined the origin of the JE using a bioengineered tooth technique. We transplanted the bioengineered tooth germ into the alveolar bone with an epithelial component that expressed green fluorescence protein. The reduced enamel epithelium from the bioengineered tooth fused with the oral epithelium, and the JE was apparently formed around the bioengineered tooth 50 days after transplantation. Importantly, the JE exhibited green fluorescence for at least 140 days after transplantation, suggesting that the JE was not replaced by oral epithelium. Therefore, our results demonstrated that the origin of the JE was the odontogenic epithelium, and odontogenic epithelium-derived JE was maintained for a relatively long period.

The Human Octopus: controlling supernumerary hands with the help of virtual reality

OpenAIRE

Aru, Jaan; Vasser, Madis; Zafra, Raul; Kulu, Sander

2016-01-01

We investigated the "human octopus" phenomenon where subjects controlled virtual supernumerary hands through hand tracking technology and virtual reality. Four experiments were developed to study how subjects (n=10) operate with different number and behaviour of supernumerary hands. The behaviours involved inserting movement delays to the virtual hands and adjusting their movement scale or position. It was found that having more hands to operate with does not necessarily mean higher success r...

Multidisciplinary management of impacted central incisors due to supernumerary teeth and an associated dentigerous cyst

Directory of Open Access Journals (Sweden)

Ritesh R Kalaskar

2011-01-01

Full Text Available Supernumerary teeth are the most common developmental dental anomaly resulting from hyperactivity of dental lamina, dichotomy, environmental factor, or polygenetic process of atavism. Supernumerary teeth present classical oral complication such as impaction of adjacent teeth, crowding, diastema formation, rotation, displacement of teeth, and occlusal interference. A dentigerous cyst associated with anterior supernumerary teeth (mesiodens is rare and accounts for 5% of all dentigerous cysts. The present case reports describe the successful management of the impacted permanent maxillary central incisor positioned high in the vestibule. A combination of surgical and orthodontic techniques was employed to improve treatment outcome with greater hard and soft tissue preservation and to prevent psychological problems. In the surgical phase, supernumerary teeth and dentigerous cyst were removed. Subsequently traction was employed by bonding bracket on the labial surface using closed and open eruption techniques. Successively, fixed orthodontic treatment was started to align permanent maxillary central incisors in an occlusal plane. Thus, combination of surgical and orthodontic method can be the treatment of choice over surgical extraction, implant placement, and surgical repositioning.

Multidisciplinary management of impacted central incisors due to supernumerary teeth and an associated dentigerous cyst.

Science.gov (United States)

Kalaskar, Ritesh R; Kalaskar, Ashita R

2011-01-01

Supernumerary teeth are the most common developmental dental anomaly resulting from hyperactivity of dental lamina, dichotomy, environmental factor, or polygenetic process of atavism. Supernumerary teeth present classical oral complication such as impaction of adjacent teeth, crowding, diastema formation, rotation, displacement of teeth, and occlusal interference. A dentigerous cyst associated with anterior supernumerary teeth (mesiodens) is rare and accounts for 5% of all dentigerous cysts. The present case reports describe the successful management of the impacted permanent maxillary central incisor positioned high in the vestibule. A combination of surgical and orthodontic techniques was employed to improve treatment outcome with greater hard and soft tissue preservation and to prevent psychological problems. In the surgical phase, supernumerary teeth and dentigerous cyst were removed. Subsequently traction was employed by bonding bracket on the labial surface using closed and open eruption techniques. Successively, fixed orthodontic treatment was started to align permanent maxillary central incisors in an occlusal plane. Thus, combination of surgical and orthodontic method can be the treatment of choice over surgical extraction, implant placement, and surgical repositioning.

The genome of Nectria haematococca: contribution of supernumerary chromosomes to gene expansion.

Directory of Open Access Journals (Sweden)

Jeffrey J Coleman

2009-08-01

Full Text Available The ascomycetous fungus Nectria haematococca, (asexual name Fusarium solani, is a member of a group of >50 species known as the "Fusarium solani species complex". Members of this complex have diverse biological properties including the ability to cause disease on >100 genera of plants and opportunistic infections in humans. The current research analyzed the most extensively studied member of this complex, N. haematococca mating population VI (MPVI. Several genes controlling the ability of individual isolates of this species to colonize specific habitats are located on supernumerary chromosomes. Optical mapping revealed that the sequenced isolate has 17 chromosomes ranging from 530 kb to 6.52 Mb and that the physical size of the genome, 54.43 Mb, and the number of predicted genes, 15,707, are among the largest reported for ascomycetes. Two classes of genes have contributed to gene expansion: specific genes that are not found in other fungi including its closest sequenced relative, Fusarium graminearum; and genes that commonly occur as single copies in other fungi but are present as multiple copies in N. haematococca MPVI. Some of these additional genes appear to have resulted from gene duplication events, while others may have been acquired through horizontal gene transfer. The supernumerary nature of three chromosomes, 14, 15, and 17, was confirmed by their absence in pulsed field gel electrophoresis experiments of some isolates and by demonstrating that these isolates lacked chromosome-specific sequences found on the ends of these chromosomes. These supernumerary chromosomes contain more repeat sequences, are enriched in unique and duplicated genes, and have a lower G+C content in comparison to the other chromosomes. Although the origin(s of the extra genes and the supernumerary chromosomes is not known, the gene expansion and its large genome size are consistent with this species' diverse range of habitats. Furthermore, the presence of unique

The genome of Nectria haematococca: contribution of supernumerary chromosomes to gene expansion

Energy Technology Data Exchange (ETDEWEB)

Coleman, J.J.; Rounsley, S.D.; Rodriguez-Carres, M.; Kuo, A.; Wasmann, C.c.; Grimwood, J.; Schmutz, J.; Taga, M.; White, G.J.; Zhuo, S.; Schwartz, D.C.; Freitag, M.; Ma, L.-J.; Danchin, E.G.J.; Henrissat, B.; Cutinho, P.M.; Nelson, D.R.; Straney, D.; Napoli, C.A.; Baker, B.M.; Gribskov, M.; Rep, M.; Kroken, S.; Molnar, I.; Rensing, C.; Kennell, J.C.; Zamora, J.; Farman, M.L.; Selker, E.U.; Salamov, A.; Shapiro, H.; Pangilinan, J.; Lindquist, E.; Lamers, C.; Grigoriev, I.V.; Geiser, D.M.; Covert, S.F.; Temporini, S.; VanEtten, H.D.

2009-04-20

The ascomycetous fungus Nectria haematococca, (asexual name Fusarium solani), is a member of a group of .50 species known as the"Fusarium solani species complex". Members of this complex have diverse biological properties including the ability to cause disease on .100 genera of plants and opportunistic infections in humans. The current research analyzed the most extensively studied member of this complex, N. haematococca mating population VI (MPVI). Several genes controlling the ability of individual isolates of this species to colonize specific habitats are located on supernumerary chromosomes. Optical mapping revealed that the sequenced isolate has 17 chromosomes ranging from 530 kb to 6.52 Mb and that the physical size of the genome, 54.43 Mb, and the number of predicted genes, 15,707, are among the largest reported for ascomycetes. Two classes of genes have contributed to gene expansion: specific genes that are not found in other fungi including its closest sequenced relative, Fusarium graminearum; and genes that commonly occur as single copies in other fungi but are present as multiple copies in N. haematococca MPVI. Some of these additional genes appear to have resulted from gene duplication events, while others may have been acquired through horizontal gene transfer. The supernumerary nature of three chromosomes, 14, 15, and 17, was confirmed by their absence in pulsed field gel electrophoresis experiments of some isolates and by demonstrating that these isolates lacked chromosome-specific sequences found on the ends of these chromosomes. These supernumerary chromosomes contain more repeat sequences, are enriched in unique and duplicated genes, and have a lower G+C content in comparison to the other chromosomes. Although the origin(s) of the extra genes and the supernumerary chromosomes is not known, the gene expansion and its large genome size are consistent with this species' diverse range of habitats. Furthermore, the presence of unique genes on

A review of supernumerary and absent limbs and digits of the upper limb.

Science.gov (United States)

Klaassen, Zachary; Choi, Monica; Musselman, Ruth; Eapen, Deborah; Tubbs, R Shane; Loukas, Marios

2012-03-01

For years people have been enamored by anomalies of the human limbs, particularly supernumerary and absent limbs and digits. Historically, there are a number of examples of such anomalies, including royal families of ancient Chaldea, tribes from Arabia, and examples from across nineteenth century Europe. The development of the upper limbs in a growing embryo is still being elucidated with the recent advent of homeobox genes, but researchers agree that upper limbs develop between stages 12-23 through a complex embryological process. Maternal thalidomide intake during limb development is known to cause limb reduction and subsequent amelia or phocomelia. Additionally, a number of clinical reports have illustrated different limb anomaly cases, with each situation unique in phenotype and developmental abnormality. Supernumerary and absent limbs and digits are not unique to humans, and a number of animal cases have also been reported. This review of the literature illustrates the historical, anatomical, and clinical aspects of supernumerary and absent limbs and digits for the upper limb.

Supernumerary registrar experience at the University of Cape Town ...

African Journals Online (AJOL)

Background. Despite supernumerary registrars (SNRs) being hosted in South African (SA) training programmes, there are no reports of their experience. Objectives. To evaluate the experience of SNRs at the University of Cape Town, SA, and the experience of SNRs from the perspective of. SA registrars (SARs). Methods.

Surgical and orthodontic management of fused maxillary central and lateral incisors in early mixed dentition stage.

Science.gov (United States)

Ramamurthy, Suresh; Satish, Ramaswamy; Priya, Kalidass

2014-01-01

Fusion is one of the developmental dental anomalies in which two adjacent teeth are joined at the crown level forming a single tooth with an enlarged crown. Fusion causes some clinical problems such as unaesthetic appearance, pain, caries, and malocclusion. The management of fusion often needs multidisciplinary approach to give best possible esthetic and functional outcome. This paper reports a case of 9-year-old boy with fused maxillary left central and lateral incisors who was treated with 2 × 4 fixed orthodontic appliances after surgical separation of fused teeth.

Surgical and Orthodontic Management of Fused Maxillary Central and Lateral Incisors in Early Mixed Dentition Stage

Directory of Open Access Journals (Sweden)

Suresh Ramamurthy

2014-01-01

Full Text Available Fusion is one of the developmental dental anomalies in which two adjacent teeth are joined at the crown level forming a single tooth with an enlarged crown. Fusion causes some clinical problems such as unaesthetic appearance, pain, caries, and malocclusion. The management of fusion often needs multidisciplinary approach to give best possible esthetic and functional outcome. This paper reports a case of 9-year-old boy with fused maxillary left central and lateral incisors who was treated with 2×4 fixed orthodontic appliances after surgical separation of fused teeth.

Bilateral maxillary fused second and third molars: a rare occurrence

OpenAIRE

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-01-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the secon...

Supplementary Tooth: To Extract or Observe? Evidence Based Practice with the Literature Review

Directory of Open Access Journals (Sweden)

Nikhil G Patel

2015-01-01

Full Text Available Background : Supernumerary teeth are the teeth present in addition to the normal set of teeth. They may be single, multiple, unilateral or bilateral, erupted or unerupted present in one or both jaws and may or may not be associated with other disease or syndrome. Multidisciplinary approach is necessary to meet the treatment challenges of supernumerary teeth. Supernumerary teeth can be managed either by removal/ endodontic/ orthodontic therapy or by maintaining them in the arch and frequent observation. Removal of supernumerary teeth is recommended where there is compromised esthetic and functional status. This article reviews case series of supernumerary teeth with no associated disease or syndromes.

Surgical management of impacted incisors in associate with supernumerary teeth: a combine case report of spontaneous eruption and orthodontic extrusion.

Science.gov (United States)

Das, D; Misra, J

2012-01-01

Maxillary permanent incisors impaction is not a frequent case in dental practice, but its treatment is challenging because of its importance to facial esthetics. Supernumerary teeth are the main cause of impaction of upper incisors. Supernumerary teeth when present can cause both esthetic and pathologic problems. Early detection of such teeth is most important if complications are to be avoided. In this reported case, the orthopantamogram of a 9-year-old boy revealed two impacted supernumerary teeth in the maxillary anterior region, which was interfering with the eruption of the permanent central incisors. The impacted supernumerary teeth were surgically removed, 11 was repositioned in the arch as it was situated very high in the arch, close to the nasal floor. Twenty-one erupted spontaneously but orthodontic force was applied over 11 to bring it into the occlusion and alignment was achieved with 0.014 mm NiTi wire.

Prevalence and distribution of dental anomalies: a comparison between maxillary and mandibular tooth agenesis.

Science.gov (United States)

Al-Abdallah, Mariam; AlHadidi, Abeer; Hammad, Mohammad; Al-Ahmad, Hazem; Saleh, Raja'

2015-11-01

The aim of this study was to compare the pattern and prevalence of associated dental anomalies between maxillary and mandibular tooth agenesis (hypodontia). A sample of 3315 dental patients, aged 8.6 to 25.4 years, was surveyed for tooth agenesis (excluding third molars): 106 subjects were diagnosed with maxillary hypodontia (group 1) and 70 with mandibular hypodontia (group 2). Both groups were examined for the following dental anomalies: retained deciduous molars, infraocclusion of deciduous molars, impaction, microdontia of maxillary lateral incisors, supernumerary teeth, transposition, transmigration, and ectopic eruption of the permanent molars. For statistical testing, the chi-square test (P anomalies among the groups. We found that 77.5% of the patients in the mandibular hypodontia group had at least 1 dental anomaly compared with 49.5% in the maxillary hypodontia group (P dental anomaly with a significantly increased prevalence in the maxillary hypodontia group compared with the mandibular hypodontia group was microdontia of the maxillary lateral incisors (groups 1, 46.7%; group 2, 12.9%; P dental development in both jaws. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Selective cognitive impairment and tall stature due to chromosome 19 supernumerary ring.

Science.gov (United States)

Melis, Daniela; Genesio, Rita; Del Giudice, Ennio; Taurisano, Roberta; Mormile, Angela; D'Elia, Federica; Conti, Anna; Imperati, Floriana; Andria, Generoso; Nitsch, Lucio

2012-01-01

Small supernumerary marker chromosomes (sSMC) occur with a frequency of approximately 0.4 per 1000 newborns and are more frequent in the population with mental retardation and/or with dysmorphic signs. Small supernumerary chromosome rings (sSCR) usually occur as apart of a mosaic karyotype (Liehr et al., 2004). Chromosome 19 supernumerary rings are very rare. Almost all cases of sSMC19 have been reported on Thomas Liehr's website (http://www.med.uni-jena.de/fish/sSMC/19.htm#Start19). Of these cases, 14 were with phenotypic abnormalities and a clear characterization of the sSMC; two cases were suitable for comparison with our case with regard to their genetic content, but not with regard to the structure ofthe sSMC (Manvelyan et al., 2008). The phenotype, associated with partial trisomy 19q, includes facial dysmorphism, growth and mental retardation, macrocephaly, heart malformation and anomalies of the genitourinary and gastrointestinal tracts. The phenotype associated with partial trisomy 19p is characterized by dysmorphic features, severe mental retardation, abnormalities of brain morphology and anomalies of the fingers (Tercanli et al., 2000; Qorri et al., 2002; Novelli et al., 2005; Vraneković et al., 2008). Herein, we report the phenotype and molecular cytogenetic analysis in a patient with the smallest de-novo constitutional ring extended from the p12 to q12 region of chromosome 19.

Phantom Sensations, Supernumerary Phantom Limbs and Apotemnophilia: Three Body Representation Disorders.

Science.gov (United States)

Tatu, Laurent; Bogousslavsky, Julien

2018-01-01

Body representation disorders continue to be mysterious and involve the anatomical substrate that underlies the mental representation of the body. These disorders sit on the boundaries of neurological and psychiatric diseases. We present the main characteristics of 3 examples of body representation disorders: phantom sensations, supernumerary phantom limb, and apotemnophilia. The dysfunction of anatomical circuits that regulate body representation can sometimes have paradoxical features. In the case of phantom sensations, the patient feels the painful subjective sensation of the existence of the lost part of the body after amputation, surgery or trauma. In case of apotemnophilia, now named body integrity identity disorder, the subject wishes for the disappearance of the existing and normal limb, which can occasionally lead to self-amputation. More rarely, a brain-damaged patient with 4 existing limbs can report the existence of a supernumerary phantom limb. © 2018 S. Karger AG, Basel.

The Study on Grinding Ratio in Form Grinding with White Fused Alumina (WA) Grinding Wheels

Science.gov (United States)

Junming, Wang; Jiong, Wang; Deyuan, Lou

2018-03-01

The study is carried out based on an experiment of form grinding spur rack with white fused alumina (WA) grinding wheels. In the experiment, SOV-3020A type tri-axial image mapper is utilized to measure the profile of the tooth space in the rack, and the curve equations between the sectional area of the tooth space and the tooth sequence under different grinding depths are established by nonlinear curve regress using software of origin8.0. Then, it deduces the prediction equations for current grinding ratio and cumulative grinding ratio under different grinding depths. The result shows that the grinding ratio is exponential decline relationship with the increase of the number of the tooth to be ground under the same grinding depth, and the decline speed is fast in the initial stage. With the increase of grinding depth, the grinding ratio increases gradually. The cumulative grinding ratio is about twice as high as the current grinding ratio. Thus, large grinding depth is generally used in rough grinding to improve grinding efficiency.

Genetic background of supernumerary teeth.

Science.gov (United States)

Subasioglu, Asli; Savas, Selcuk; Kucukyilmaz, Ebru; Kesim, Servet; Yagci, Ahmet; Dundar, Munis

2015-01-01

Supernumerary teeth (ST) are odontostomatologic anomaly characterized by as the existence excessive number of teeth in relation to the normal dental formula. This condition is commonly seen with several congenital genetic disorders such as Gardner's syndrome, cleidocranial dysostosis and cleft lip and palate. Less common syndromes that are associated with ST are; Fabry Disease, Ellis-van Creveld syndrome, Nance-Horan syndrome, Rubinstein-Taybi Syndrome and Trico-Rhino-Phalangeal syndrome. ST can be an important component of a distinctive disorder and an important clue for early diagnosis. Certainly early detecting the abnormalities gives us to make correct management of the patient and also it is important for making well-informed decisions about long-term medical care and treatment. In this review, the genetic syndromes that are related with ST were discussed.

Multiple tooth anomalies in a nonsyndromic patient with class II division 2 malocclusions: A case report and a literature review.

Science.gov (United States)

Isman, E; Isman, O; Aktan, A M; Ciftci, E; Topcuoglu, T

2015-01-01

Reports in the literature about the craniofacial characteristics of patients with class II division 2 malocclusions show a lot of different patterns accompanied by palatally displaced upper incisors, congenital missing teeth, polydiastema, fusion, germination, tooth impaction, peg-shaped lateral incisors, persistent teeth, hypodontia, persistent deciduous teeth, transpositions, and supernumerary teeth. The following case report focuses on the description of the clinical characteristics observed on a patient with a very unusual conjunction of dental and skeletal anomalies mentioned above, as well as a literature review on the related issues. Extra-intra-oral examinations, radiographic evaluations, orthodontic consultation, and reviewing the literature concluded that this nonsyndromic patient that refused to receive all dental treatment approaches is special with its uniqueness.

Múltiples dientes supernumerarios distomolares Multiple distomolars supernumerary teeth

OpenAIRE

F.J. Rodríguez Romero; S. Cerviño Ferradanes

2009-01-01

En una dentición normal, los dientes supernumerarios son aquellos descritos como adicionales a la serie. La etiología no esta clara. Se han descritos tanto en dentición primaria como en permanente, aunque son mas frecuentes en la dentición permanente. El objetivo de este informe es presentar un caso de una paciente con múltiples dientes supernumerarios distomolares. Cuartos molares bilaterales simétricos son sumamente raros.Supernumerary teeth are described as the teeth formed in excess of th...

Impacted Supernumerary Teeth–Early or Delayed Intervention: Decision Making Dilemma?

OpenAIRE

Gupta, Seema; Marwah, Nikhil

2012-01-01

Abstract Supernumerary teeth are considered to be one of the most significant dental anomalies affecting the primary and early mixed dentition and may cause a variety of pathological disturbances to the developing permanent dentition. Early diagnosis and prompt treatment is necessary for prevention of deleterious effects on dentoalveolar structures. However, the time of intervention is the most crucial factor governing the outcome of surgical management of hyperdontia. The aim of this case re...

Psychological study of in vitro fertilization-embryo transfer participants' attitudes toward the destiny of their supernumerary embryos.

Science.gov (United States)

Laruelle, C; Englert, Y

1995-05-01

To study the motivations underlying IVF-ET participants' choice to donate or destroy their supernumerary embryos. Couples' opinions are studied through a questionnaire and a psychological interview. Two hundred couples about to undergo IVF-ET. The fertility unit of an academic hospital. Couples' choice for supernumerary embryos' destiny; opinions on embryo status, on importance of genetic lineage in the filial bonding, on gamete donation, and on multiple pregnancy risk. Donation is the most frequent choice but destruction is tolerated by almost all the couples (92%). Couples considering the embryo as a child choose destruction as frequently as donation but refuse experimentation on the embryo. Donation is highest among couples who stress education more than genetic lineage in parental bonding. This is confirmed by the choice of the couples requiring donor gametes. Couples express differing attitudes toward risks of twins and risks of triplets: twins are much more desired than triplets, which are frequently refused. Couples' opinions on the respective importance of genetic lineage and education in defining parental bonding are more determinant in their decision to destroy or to donate their supernumerary embryos than their opinions on the in vitro embryo status, which only determines their attitude toward experimentation.

Surgical and Orthodontic Management of Fused Maxillary Central and Lateral Incisors in Early Mixed Dentition Stage

OpenAIRE

Ramamurthy, Suresh; Satish, Ramaswamy; Priya, Kalidass

2014-01-01

Fusion is one of the developmental dental anomalies in which two adjacent teeth are joined at the crown level forming a single tooth with an enlarged crown. Fusion causes some clinical problems such as unaesthetic appearance, pain, caries, and malocclusion. The management of fusion often needs multidisciplinary approach to give best possible esthetic and functional outcome. This paper reports a case of 9-year-old boy with fused maxillary left central and lateral incisors who was treated with ...

About a New Type of Fuse Based on the Controllable Fusing Effect

Directory of Open Access Journals (Sweden)

PLESCA, A.

2009-06-01

Full Text Available Fuses are among the best known of electrical devices and there are an extremely large number in use throughout the world. Beside of the advantageous features, the nowadays fuses have certain drawbacks. Therefore, a new type of fuse based on controllable fusing concept is proposed and a study as regards the total clearing time is done. The new concept has been validated through many experimental tests at different current values. The new type of fuse based on controllable fusing concept can be integrated within an overcurrent protection system especially to protect power semiconductors where the Joule integral criterion is better satisfied.

Low grade mosaic for a complex supernumerary ring chromosome 18 in an adult patient with multiple congenital anomalies

Directory of Open Access Journals (Sweden)

Hoogeboom A Jeannette M

2010-07-01

Full Text Available Abstract Background Several cases have been reported of patients with a ring chromosome 18 replacing one of the normal chromosomes 18. Less common are patients with a supernumerary ring chromosomes 18. High resolution whole genome examination in patients with multiple congenital abnormalities might reveal cytogenetic abnormalities of an unexpected complexity. Results We report a 24 years old male patient with lower spinal anomalies, hypospadia, bifid scrotum, cryptorchism, anal atresia, kidney stones, urethra anomalies, radial dysplasia, and a hypoplastic thumb. Some of the anomalies overlap with the VACTERL association. Chromosome analysis of cultured peripheral blood lymphocytes revealed an additional ring chromosome in 13% of the metaphases. Both parents had a normal karyotype, demonstrating the de novo origin of this ring chromosome. FISH analysis using whole chromosome paints showed that the additional chromosomal material was derived from chromosome 18. Chromosome analysis of cultured fibroblasts revealed only one cell with the supernumerary ring chromosome in the 400 analyzed. To characterize the ring chromosome in more detail peripheral blood derived DNA was analyzed using SNP-arrays. The array results indicated a 5 Mb gain of the pericentromeric region of chromosome 18q10-q11.2. FISH analysis using BAC-probes located in the region indicated the presence of 6 signals on the r(18 chromosome. In addition, microsatellite analysis demonstrated that the unique supernumerary ring chromosome was paternally derived and both normal copies showed biparental disomy. Conclusions We report on an adult patient with multiple congenital abnormalities who had in 13% of his cells a unique supernumerary ring chromosome 18 that was composed of 6 copies of the 5 Mb gene rich region of 18q11.

Supernumerary head of biceps brachii and branching pattern of the musculocutaneous nerve

Directory of Open Access Journals (Sweden)

Mohan Basavaraj Angadi

2016-01-01

Full Text Available During routine dissection by medical undergraduates, third head of the biceps brachii muscle was found on the left side of a 75-year-old male cadaver in a total of 48 arms dissected in Department of Anatomy Armed Forces Medical College, Pune. Biceps brachii is a muscle of arm having two heads hence the name. The most frequent variation of the muscle is in the number of heads with a prevalence range of 9.1-22.9%. The origin of the supernumerary head in this case was from the humerus, between the insertion of the coracobrachialis and the upper part of the origin of the brachialis, and also from the medial intermuscular septum. The supernumerary head joined the common belly. It was supplied by the musculocutaneous nerve which after emerging from brachialis pierced it near the middle and terminated by finally supplying the biceps belly. In our study, 2.08% (1 of 48 of male cadavers were found to have the third head of biceps. The incidence of this variation can be as much as 10% as, shown in previous studies on Indian population, as reported in standard textbooks of anatomy.

Six upper incisors: what's next?

Science.gov (United States)

Berneburg, Mirjam; Meller, Christian

2016-01-01

This case report describes our therapeutic approach taken in a girl with eruption disturbance of the upper anterior teeth. Two supernumerary teeth were involved, which required a combination of orthodontic and surgical treatment. The initial situation in the upper anterior segment was characterized by two supernumerary mesial incisors, ectopic eruption of the distally located lateral incisors, and crowded tooth buds in the canine areas. Key decisions had to be made as to whether any teeth needed to be extracted and, if so, regarding the timing and sites of extraction. Removing teeth too early would have preempted a complete assessment of tooth quality, whereas late extraction would have carried a risk of eruption disturbance. Once the distal lateral incisors had erupted, the supernumerary mesial incisors were extracted and the central incisors (initially located in between) mesialized with a bracket appliance. Following space closure and mesialization of the lateral incisors, a functional appliance was used. Tooth 13 was erupting, while tooth 23 was displaced and subsequently aligned as part of the final bracket treatment. To successfully treat eruption disturbances, a careful diagnostic workup is essential, including informative radiographs, personalized treatment planning, and correct decision-making as to whether teeth need to be extracted and regarding the timing and sites of extraction. Finally, the eruption of the canines should be monitored.

An EMG Interface for the Control of Motion and Compliance of a Supernumerary Robotic Finger

Science.gov (United States)

Hussain, Irfan; Spagnoletti, Giovanni; Salvietti, Gionata; Prattichizzo, Domenico

2016-01-01

In this paper, we propose a novel electromyographic (EMG) control interface to control motion and joints compliance of a supernumerary robotic finger. The supernumerary robotic fingers are a recently introduced class of wearable robotics that provides users additional robotic limbs in order to compensate or augment the existing abilities of natural limbs without substituting them. Since supernumerary robotic fingers are supposed to closely interact and perform actions in synergy with the human limbs, the control principles of extra finger should have similar behavior as human’s ones including the ability of regulating the compliance. So that, it is important to propose a control interface and to consider the actuators and sensing capabilities of the robotic extra finger compatible to implement stiffness regulation control techniques. We propose EMG interface and a control approach to regulate the compliance of the device through servo actuators. In particular, we use a commercial EMG armband for gesture recognition to be associated with the motion control of the robotic device and surface one channel EMG electrodes interface to regulate the compliance of the robotic device. We also present an updated version of a robotic extra finger where the adduction/abduction motion is realized through ball bearing and spur gears mechanism. We have validated the proposed interface with two sets of experiments related to compensation and augmentation. In the first set of experiments, different bimanual tasks have been performed with the help of the robotic device and simulating a paretic hand since this novel wearable system can be used to compensate the missing grasping abilities in chronic stroke patients. In the second set, the robotic extra finger is used to enlarge the workspace and manipulation capability of healthy hands. In both sets, the same EMG control interface has been used. The obtained results demonstrate that the proposed control interface is intuitive and can

A Longitudinal Study of the Presence of Dental Anomalies in the Primary and Permanent Dentitions of Cleft Lip and/or Palate Patients.

Science.gov (United States)

Suzuki, Akira; Nakano, Masayuki; Yoshizaki, Keigo; Yasunaga, Atsushi; Haruyama, Naoto; Takahashi, Ichiro

2017-05-01

  The aim is to survey primary and permanent dental anomalies: hypodontia, microdontia, a supernumerary tooth, and fused teeth in patients with cleft lip and/or palate.   Retrospective longitudinal study Subjects :  The subjects were selected from all 1724 patients with cleft lip and/or palate who were registered at the orthodontic clinic of Kyushu University Hospital, Fukuoka, Japan, from 1970 to 2009. Finally, 994 subjects were evaluated for primary dentition, 1352 for permanent dentition, and 871 for the longitudinal changes from primary to permanent dentition.   The prevalence of dental anomalies was compared for each tooth type, among various cleft types, between males and females, and between the alveolar cleft area and the noncleft area.   The prevalence of hypodontia was 16.2% for primary dentition and 52.7% for permanent dentition in the subjects with cleft lip and/or palate. Hypodontia increased with the severity of the cleft type. Multiple hypodontia was found more frequently in the subjects with bilateral cleft lip and palate and the subjects with unilateral cleft lip and palate. Microformed lateral incisors were found in 22.7% of permanent lateral incisors but not in primary dentition. Supernumerary teeth were found in 17.7% of the subjects with cleft lip and/or palate for primary maxillary dentition and in 5.7% for permanent maxillary dentition.   The prevalence of hypodontia was greater in permanent dentition than in primary dentition; although, it was not much different between males and females or between the right and left sides. The prevalence of dental anomalies was significantly different among four groups by cleft type: cleft lip, cleft lip and alveolus, cleft lip and palate, and cleft palate.

An Erupted Dilated Odontoma: A Rare Presentation

Directory of Open Access Journals (Sweden)

Gaurav Sharma

2016-01-01

Full Text Available A dilated odontoma is an extremely rare developmental anomaly represented as a dilatation of the crown and root as a consequence of a deep, enamel-lined invagination and is considered a severe variant of dens invaginatus. An oval shape of the tooth lacking morphological characteristics of a crown or root implies that the invagination happened in the initial stages of morphodifferentiation. Spontaneous eruption of an odontoma is a rare occurrence and the occurrence of a dilated odontoma in a supernumerary tooth is even rarer with only a few case reports documented in the English literature. We present an extremely rare case of erupted dilated odontoma occurring in the supernumerary tooth in anterior maxillary region in an 18-year-old male, which, to the best of our knowledge, is the first ever case reported in English literature.

Four small supernumerary marker chromosomes derived from chromosomes 6, 8, 11 and 12 in a patient with minimal clinical abnormalities: a case report

Directory of Open Access Journals (Sweden)

Hamid Ahmed B

2010-08-01

Full Text Available Abstract Introduction Small supernumerary marker chromosomes are still a problem in cytogenetic diagnostic and genetic counseling. This holds especially true for the rare cases with multiple small supernumerary marker chromosomes. Most such cases are reported to be clinically severely affected due to the chromosomal imbalances induced by the presence of small supernumerary marker chromosomes. Here we report the first case of a patient having four different small supernumerary marker chromosomes which, apart from slight developmental retardation in youth and non-malignant hyperpigmentation, presented no other clinical signs. Case presentation Our patient was a 30-year-old Caucasian man, delivered by caesarean section because of macrosomy. At birth he presented with bilateral cryptorchidism but no other birth defects. At age of around two years he showed psychomotor delay and a bilateral convergent strabismus. Later he had slight learning difficulties, with normal social behavior and now lives an independent life as an adult. Apart from hypogenitalism, he has multiple hyperpigmented nevi all over his body, short feet with pes cavus and claw toes. At age of 30 years, cytogenetic and molecular cytogenetic analysis revealed a karyotype of 50,XY,+min(6(:p11.1-> q11.1:,+min(8(:p11.1->q11.1:,+min(11(:p11.11->q11:,+min(12(:p11.2~12->q10:, leading overall to a small partial trisomy in 12p11.1~12.1. Conclusions Including this case, four single case reports are available in the literature with a karyotype 50,XN,+4mar. For prenatally detected multiple small supernumerary marker chromosomes in particular we learn from this case that such a cytogenetic condition may be correlated with a positive clinical outcome.

Esthetic Rehabilitation in a Patient with Mesiodens

Directory of Open Access Journals (Sweden)

Leena Verma

2012-01-01

Full Text Available Supernumerary tooth is one that is additional to the normal series and can be found in almost any region of the dental arch. They may be single, multiple, unilateral or bilateral erupted or unerupted and in one or both jaws. Mesiodens is the most common type of supernumerary tooth found in the premaxilla between two central incisors. Presented here is a case of ten year old male child with supplemental mesiodens with talons cusp erupted in the oral cavity causing malocclusion and an another horizontally impacted mesiodens near the nasal floor. Mesiodens was extracted and esthetic reconstruction of the patient was done by bringing left maxillary central incisor to correct position by orthodontic treatment.

Autogenous tooth transplantation for replacing a lost tooth: case reports

Directory of Open Access Journals (Sweden)

Ji-Youn Kang

2013-02-01

Full Text Available The autogenous tooth transplantation is an alternative treatment replacing a missing tooth when a suitable donor tooth is available. It is also a successful treatment option to save significant amount of time and cost comparing implants or conventional prosthetics. These cases, which required single tooth extraction due to deep caries and severe periodontal disease, could have good results by transplanting non-functional but sound donor tooth to the extraction site.

Orthodontic extrusion of subgingivally fractured tooth using a removable appliance: an alternative treatment to reestablish biological width.

Science.gov (United States)

Verma, Kanika Gupta; Juneja, Suruchi; Kumar, Sandeep; Goyal, Tanya

2014-01-01

Restoration of a traumatically injured tooth presents a clinical challenge for a predictable aesthetic outcome. This case report describes a multidisciplinary approach of a subgingivally fractured permanent maxillary central incisor. A removable orthodontic appliance was used for orthodontic extrusion of root, and surgical gingival recontouring was done with electrocautery to reestablish the biological width. Form and function were restored establishing biological width and esthetics was repaired with porcelain fused to metal crown.

Fibroadenoma in Axillary Supernumerary Breast in a 17-Year-Old Girl: Case Report.

Science.gov (United States)

Surd, Adrian; Mironescu, Aurel; Gocan, Horatiu

2016-10-01

Supernumerary breast or polymastia is a well documented anomaly of the breast, and commonly presents along the embryonic milk line extending between the axilla and groin. However, cases of polymastia have been recorded in the face, vulva, and perineum. The clinical significance of these anomalies include their susceptibility to inflammatory and malignant changes, and their association with other congenital anomalies of the urinary and cardiovascular systems. In this article we report a case of fibroadenoma that developed in the supernumerary breast of the right axilla in a 17-year-old girl. It is uncommon to find such palpable masses in young patients. Clinical and sonographic examination of both breasts revealed no abnormalities and no lymph nodes were detected in the axillae or the neck. No associated urologic or cardiovascular abnormalities were found, and the histopathological examination of the excisional biopsy samples showed a well-defined, capsulated intracanalicular type of fibroadenoma similar to that of eutopic mammary tissue. In this report, we describe a rare case of fibroadenoma in an accessory breast in a young woman. There are a fewer than 40 reports in the world about this subject, of which differential diagnoses include: cancer in axillary supernumerary breast, hidradenitis, axillary lymphadenomegaly, lipomas, anexial cutaneous neoplasia, cysts, and phylloides tumor. The combination of clinical examination, ultrasound, and cytology leads to adequate treatment, especially surgical. The diagnosis could be confused because of findings from cytology. In this case, because of the clinical and sonographic findings and multiple differential diagnosis, only the histopathological study was used to confirm the diagnosis. Despite its high sensitivity, cytology has low specificity and could create false positive results. However, atypical lesions can be seen in fibroadenomas, especially in younger patients, pregnant patients, and in patients who use hormonal

Dioctophyme renale Goeze, 1782 in a cat with a supernumerary kidney

Directory of Open Access Journals (Sweden)

Daniela Pedrassani

Full Text Available This study reports a case of parasitism by Dioctophyme renale in a supernumerary kidney and abdominal cavity of a female cat in Brazil. The three-year-old cat of indeterminate breed presented abdominal distension and was taken to the University of Contestado Veterinary Hospital in Canoinhas, state of Santa Catarina, since the owner suspected pregnancy. An ultrasound scan did not confirm pregnancy but revealed parasitism in the kidney. This case is worth reporting because domestic cats are rarely hosts of this nematode species.

Autogenous tooth transplantation: an alternative to replace extracted tooth

Directory of Open Access Journals (Sweden)

David B. Kamadjaja

2015-09-01

Full Text Available Background: The gold standard treatment to replace missing tooth is dental implants, however, in certain cases, such as in young patients its placement is contraindicated. Autogenous tooth transplantation, which has been widely done in Scandinavian countries for many years, may become a good alternative to overcome this problem. Purpose: This article attempted to provide information about the indication, treatment planning, surgical technique and the successful result of autogenous tooth transplantation. Case: A fifteen year old male patient presented with large caries and periapical disease of his lower left first molar, which was partially erupted and the roots was not fully formed in radiograph. Case management: Autogenous tooth transplantation procedure was performed consisting of extraction of #36, odontectomy of #38 followed by its implantation to socket #36 and fixation of the transplanted tooth to the adjacent teeth. Post operative evaluation was done on regular basis within 18 months period. There was no complaint, the tooth was clinically stable and no evidence of periodontal problem. Serial radiographs showed healing of alveolar bone and periodontal tissue, and the complete root formation was evident by 18 months post operatively. Conclusion: Autogenous tooth transplantation is a potential alternative to replace extracted tooth. Provided that the case be properly planned and operation carefully performed, successful result of this treatment can be achieved.

Taking advantage of an unerupted third molar: a case report

Directory of Open Access Journals (Sweden)

Igor Figueiredo Pereira

Full Text Available ABSTRACT Introduction: Treatments with dental surgery seek to displace tooth to the correct position within the dental arch. Objective: To report a clinical case that took advantage of an unerupted third molar. Case history: A male patient, 18 years of age, was referred by his dentist to evaluate the third molars. The clinical exam revealed no visible lower third molars. The computed tomography (CT exam showed the presence of a supernumerary tooth in the region of the mandibular ramus, on the left side, and impaction of the third molar, which was causing root resorption on the second molar, thus making it impossible to remain in the buccal cavity. The preferred option, therefore, was to remove both second molar and the supernumerary tooth, in addition to attaching a device to the third molar during surgery for further traction. Results: After 12 months, the third molar reached the proper position. Conclusion: When a mandibular second permanent molar shows an atypical root resorption, an impacted third molar can effectively substitute the tooth by using an appropriate orthodontic-surgical approach.

Small supernumerary marker chromosome causing partial trisomy 6p in a child with craniosynostosis.

Science.gov (United States)

Villa, Olaya; Del Campo, Miguel; Salido, Marta; Gener, Blanca; Astier, Laura; Del Valle, Jesús; Gallastegui, Fátima; Pérez-Jurado, Luis A; Solé, Francesc

2007-05-15

We report on a child with a small supernumerary marker chromosome (sSMC) causing partial trisomy 6p. The child showed a phenotype consisting of neonatal craniosynostosis, microcephaly, and borderline developmental delay. By molecular techniques the sSMC has been shown to contain approximately 16 Mb of genomic DNA from 6p21.1 to 6cen, being de novo and of maternal origin.

Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

Science.gov (United States)

Xue, Dai Juan And Feng

2014-01-01

In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

Intranasal inverted tooth: A rare cause of a persistent rhinosinusitis

Directory of Open Access Journals (Sweden)

José Wilson Noleto

2013-01-01

Full Text Available The aim of this study was to report a case of two supernumerary teeth in the nasal cavity in a 22-year-old woman who presented pain, rhinorrhea, and inflammation of the nasal mucosa (rhinosinusitis. The computed tomograph scan showed two radiopaque images that were diagnosed as supernumerary nasal teeth. One was unerupted in the floor and the other inverted, and erupted on the floor on the left side of the nasal cavity. They were removed under general anesthesia, one through the palatine approach, and the other directly through the nasal cavity. The patient was followed for a year and there was no sign of recurrence of rhinosinusitis.

The prevalence of dental anomalies in orthodontic patients at the State University of New York at Buffalo.

Science.gov (United States)

Al-Amiri, Athari; Tabbaa, Sawsan; Preston, Charles Brian; Al-Jewair, Thikriat

2013-05-01

To determine the prevalence of permanent tooth anomalies in patients attending the graduate orthodontic clinic at the State University of New York at Buffalo. Charts of 496 subjects (310 females and 186 males) met the inclusion criteria for this study. The mean ages were 16 years and 3 months for the combined gender sample that received orthodontic treatment in the graduate orthodontic clinic between 2007 and 2010. Full pretreatment records (intraoral photographs, digital study models, lateral cephalograms and panoramic radiographs) were used for the assessment. Charts were examined for these anomalies: agenesis, supernumerary, impaction and delayed tooth eruption. Subjects were categorized by gender and ethnicity. The percentages of the anomalies were assessed according to type of malocclusion, gender, race, location, tooth class and region in the dental arches. Sixty-four subjects (12.9%) had at least one occurrence of delayed eruption and impaction (DEI), followed by 47 subjects (9.5%) who had at least one occurrence of agenesis, and seven (1.4%) had a supernumerary condition. Approximately 80% of the subjects had no dental anomalies. The presence of more than one anomaly was observed in 61 subjects. Twelve subjects (2.4%) had both agenesis and DEI. Agenesis tended to be more common in class II malocclusions (p=0.012). The prevalence of permanent tooth anomalies was (20.4%). The percentage occurrence of DEI was the highest (12.9%) followed by dental agenesis (9.5%) and supernumerary teeth (1.4%) in the orthodontic patients at the State University of New York at Buffalo.

Localization of ectopic and supernumerary parathyroid glands in patients with secondary and tertiary hyperparathyroidism: surgical description and correlation with preoperative ultrasonography and Tc99m-Sestamibi scintigraphy.

Science.gov (United States)

Andrade, José Santos Cruz de; Mangussi-Gomes, João Paulo; Rocha, Lillian Andrade da; Ohe, Monique Nakayama; Rosano, Marcello; das Neves, Murilo Catafesta; Santos, Rodrigo de Oliveira

2014-01-01

Hyperparathyroidism is an expected metabolic consequence of chronic kidney disease (CKD). Ectopic and/or supernumerary parathyroid glands (PT) may be the cause of surgical failure in patients undergoing total parathyroidectomy (PTX). To define the locations of ectopic and supernumerary PT in patients with renal hyperparathyroidism and to correlate intraoperative findings with preoperative tests. A retrospective study was conducted with 166 patients submitted to PTX. The location of PT during surgery was recorded and classified as eutopic or ectopic. The preoperative localizations of PT found by ultrasonography (USG) and Tc99m-Sestamibi scintigraphy (MIBI) were subsequently compared with intraoperative findings. In the 166 patients studied, 664 PT were found. Five-hundred-seventy-seven (86.4%) glands were classified as eutopic and 91(13.6%) as ectopic. Eight supernumerary PT were found. The most common sites of ectopic PT were in the retroesophageal and thymic regions. Taken together, USG and MIBI did not identify 56 (61.5%) ectopic glands. MIBI was positive for 69,7% of all ectopic glands located in the mediastinal and thymic regions. The presence of ectopic and supernumerary PT in patients with renal hyperparathyroidism is significant. Although preoperative imaging tests did not locate most of ectopic glands, MIBI may be important for identifying ectopic PT in the mediastinal and thymic regions.

Dihydropyridine-fused and pyridine-fused coumarins: Reduction on a glassy carbon electrode in dimethylformamide

International Nuclear Information System (INIS)

Nuñez-Vergara, Luis J.; Pardo-Jiménez, V.; Barrientos, C.; Olea-Azar, C.A.; Navarrete-Encina, P.A.; Squella, J.A.

2012-01-01

In this study, two series of dihydropyridine-fused and pyridine-fused coumarins were synthesised and electrochemically characterised in aprotic medium. In both series, the most easily reducible groups were the endocyclic carbonyl groups. The electrochemical mechanism for both types of compounds is strongly dependent on the experimental time-scale. Cyclic voltammetric (CV) reduction on a glassy carbon electrode (GCE) of the endocyclic carbonyl group of dihydropyridine-fused coumarins involves an ECEC mechanism with two electron transfer steps that are coupled with chemical reactions to produce the corresponding hemiacetal derivative. In the case of pyridine-fused coumarins, CV reduction of the endocyclic carbonyl group involves an EEC mechanism. ESR studies revealed the presence of a stabilised intermediate only for the pyridine-fused derivatives. Our theoretical study showed a spin density map of radical species delocalised mainly within the coumarin ring, indicating the reduction of the endocyclic carbonyl group. In the case of the dihydropyridine-fused derivatives, the mildly acid hydrogen of the dihydropyridine ring destabilises the radical via a father–son type reaction.

Sprouty gene dosage influences temporal-spatial dynamics of primary enamel knot formation

Czech Academy of Sciences Publication Activity Database

Lochovská, Kateřina; Peterková, Renata; Pavlíková, Zuzana; Hovořáková, Mária

2015-01-01

Roč. 15, APR 22 (2015), s. 21 ISSN 1471-213X R&D Projects: GA ČR(CZ) GAP305/12/1766; GA ČR GB14-37368G Institutional support: RVO:68378041 Keywords : enamel knot * tooth development * mouse molar * sprouty genes * sonic hedgehog * cre-loxp system * supernumerary tooth Subject RIV: EA - Cell Biology Impact factor: 2.096, year: 2015

The origin of the supernumerary subunits and assembly factors of complex I: A treasure trove of pathway evolution

NARCIS (Netherlands)

Elurbe, D.M.; Huynen, M.A.

2016-01-01

We review and document the evolutionary origin of all complex I assembly factors and nine supernumerary subunits from protein families. Based on experimental data and the conservation of critical residues we identify a spectrum of protein function conservation between the complex I representatives

Tooth anatomy

Science.gov (United States)

... whole tooth. This area is known as the "pulp" of the tooth. The jawbone is attached to ... JC, eds. Robbins and Cotran Pathologic Basis of Disease . 9th ed. Philadelphia, PA: Elsevier Saunders; 2015:chap ...

Can dead man tooth do tell tales? Tooth prints in forensic identification.

Science.gov (United States)

Christopher, Vineetha; Murthy, Sarvani; Ashwinirani, S R; Prasad, Kulkarni; Girish, Suragimath; Vinit, Shashikanth Patil

2017-01-01

We know that teeth trouble us a lot when we are alive, but they last longer for thousands of years even after we are dead. Teeth being the strongest and resistant structure are the most significant tool in forensic investigations. Patterns of enamel rod end on the tooth surface are known as tooth prints. This study is aimed to know whether these tooth prints can become a forensic tool in personal identification such as finger prints. A study has been targeted toward the same. In the present in-vivo study, acetate peel technique has been used to obtain the replica of enamel rod end patterns. Tooth prints of upper first premolars were recorded from 80 individuals after acid etching using cellulose acetate strips. Then, digital images of the tooth prints obtained at two different intervals were subjected to biometric conversion using Verifinger standard software development kit version 6.5 software followed by the use of Automated Fingerprint Identification System (AFIS) software for comparison of the tooth prints. Similarly, each individual's finger prints were also recorded and were subjected to the same software. Further, recordings of AFIS scores obtained from images were statistically analyzed using Cronbach's test. We observed that comparing two tooth prints taken from an individual at two intervals exhibited similarity in many cases, with wavy pattern tooth print being the predominant type. However, the same prints showed dissimilarity when compared with other individuals. We also found that most of the individuals with whorl pattern finger print showed wavy pattern tooth print and few loop type fingerprints showed linear pattern of tooth prints. Further more experiments on both tooth prints and finger prints are required in establishing an individual's identity.

Meiotic inheritance of a fungal supernumerary chromosome and its effect on sexual fertility in Nectria haematococca.

Science.gov (United States)

Garmaroodi, Hamid S; Taga, Masatoki

2015-10-01

PDA1-conditionally dispensable chromosome (CDC) of Nectria haematococca MP VI has long served as a model of supernumerary chromosomes in plant pathogenic fungi because of pathogenicity-related genes located on it. In our previous study, we showed the dosage effects of PDA1-CDC on pathogenicity and homoserine utilization by exploiting tagged PDA1-CDC with a marker gene. CDC content of mating partners and progenies analyzed by PCR, PFGE combined with Southern analysis and chromosome painting via FISH. In this study, we analyzed mode of meiotic inheritance of PDA1-CDC in several mating patterns with regard to CDC content and found a correlation between CDC content of parental strains with fertility of crosses. The results showed non-Mendelian inheritance of this chromosome followed by duplication or loss of the CDC in haploid genome through meiosis that probably were due to premature centromere division, not by nondisjunction as reported for the supernumerary chromosomes in other species. Correlation of CDC with fertility is the first time to be examined in fungi in this study. Copyright © 2015 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Tooth wear

Directory of Open Access Journals (Sweden)

Tušek Ivan

2014-01-01

Full Text Available Tooth wear is the loss of dental hard tissue that was not caused by decay and represents a common clinical problem of modern man. In the etiology of dental hard tissue lesions there are three dominant mechanisms that may act synergistically or separately:friction (friction, which is caused by abrasion of exogenous, or attrition of endogenous origin, chemical dissolution of dental hard tissues caused by erosion, occlusal stress created by compression and flexion and tension that leads to tooth abfraction and microfracture. Wear of tooth surfaces due to the presence of microscopic imperfections of tooth surfaces is clinically manifested as sanding veneers. Tribology, as an interdisciplinary study of the mechanisms of friction, wear and lubrication at the ultrastructural level, has defined a universal model according to which the etiopathogenesis of tooth wear is caused by the following factors: health and diseases of the digestive tract, oral hygiene, eating habits, poor oral habits, bruxism, temporomandibular disorders and iatrogenic factors. Attrition and dental erosion are much more common in children with special needs (Down syndrome. Erosion of teeth usually results from diseases of the digestive tract that lead to gastroesophageal reflux (GER of gastric juice (HCl. There are two basic approaches to the assessment of the degree of wear and dental erosion. Depending on the type of wear (erosion, attrition, abfraction, the amount of calcium that was realised during the erosive attack could be determined qualitatively and quantitatively, or changes in optical properties and hardness of enamel could be recorded, too. Abrasion of teeth (abrasio dentium is the loss of dental hard tissue caused by friction between the teeth and exogenous foreign substance. It is most commonly provoked by prosthetic dentures and bad habits, while its effect depends on the size of abrasive particles and their amount, abrasive particle hardness and hardness of tooth

Evaluation of autogenous tooth transplantation for replacement of the missing or unrestorable mandibular molar tooth

Directory of Open Access Journals (Sweden)

Wahiduj Jaman

2017-06-01

Full Text Available This study was undertaken to evaluate the functional and occlusal stability of autogenous tooth transplantation. A total of 30 patients were included. Among them, 21 participants received transplanted first molar and the remaining 9 received transplanted second molar. In all the cases, donor tooth were third molar. In each participant, extraction of un-restorable first or second molar tooth was performed which was then replaced by atrumatic extracted third molar tooth. Each third molar tooth was placed in the recipient extracted socket, followed by the evaluation of the occlusion and then stabilized with arch bar and ligature wire. Clinical follow-up evaluation was performed at 15 days, 3 and 12 months in respect to occlusal stability, tooth mobility and periodontal status. It was found that 23 transplanted tooth were successful and the remaining 7 tooth need long-term observation for the final outcome, which was statistically significant. It can be concluded that the autogenous tooth transplantation can replace missing tooth to ensure the preservation of function, aesthetic and to prevent bone resorption of the missing area of the jaw, which can lead to exceptional esthetic and functional outcome.

Age-related changes in the tooth-bone interface area of acrodont dentition in the chameleon.

Science.gov (United States)

Dosedělová, Hana; Štěpánková, Kateřina; Zikmund, Tomáš; Lesot, Herve; Kaiser, Jozef; Novotný, Karel; Štembírek, Jan; Knotek, Zdeněk; Zahradníček, Oldřich; Buchtová, Marcela

2016-09-01

Chameleon teeth develop as individual structures at a distance from the developing jaw bone during the pre-hatching period and also partially during the post-hatching period. However, in the adult, all teeth are fused together and tightly attached to the jaw bone by mineralized attachment tissue to form one functional unit. Tooth to bone as well as tooth to tooth attachments are so firm that if injury to the oral cavity occurs, several neighbouring teeth and pieces of jaw can be broken off. We analysed age-related changes in chameleon acrodont dentition, where ankylosis represents a physiological condition, whereas in mammals, ankylosis only occurs in a pathological context. The changes in hard-tissue morphology and mineral composition leading to this fusion were analysed. For this purpose, the lower jaws of chameleons were investigated using X-ray micro-computed tomography, laser-induced breakdown spectroscopy and microprobe analysis. For a long time, the dental pulp cavity remained connected with neighbouring teeth and also to the underlying bone marrow cavity. Then, a progressive filling of the dental pulp cavity by a mineralized matrix occurred, and a complex network of non-mineralized channels remained. The size of these unmineralized channels progressively decreased until they completely disappeared, and the dental pulp cavity was filled by a mineralized matrix over time. Moreover, the distribution of calcium, phosphorus and magnesium showed distinct patterns in the different regions of the tooth-bone interface, with a significant progression of mineralization in dentin as well as in the supporting bone. In conclusion, tooth-bone fusion in chameleons results from an enhanced production of mineralized tissue during post-hatching development. Uncovering the developmental processes underlying these outcomes and performing comparative studies is necessary to better understand physiological ankylosis; for that purpose, the chameleon can serve as a useful model

Mathematical description of tooth flank surface of globoidal worm gear with straight axial tooth profile

Science.gov (United States)

Połowniak, Piotr; Sobolak, Mariusz

2017-12-01

In this article, a mathematical description of tooth flank surface of the globoidal worm and worm wheel generated by the hourglass worm hob with straight tooth axial profile is presented. The kinematic system of globoidal worm gear is shown. The equation of globoid helix and tooth axial profile of worm is derived to determine worm tooth surface. Based on the equation of meshing the contact lines are obtained. The mathematical description of globoidal worm wheel tooth flank is performed on the basis of contact lines and generating the tooth side by the extreme cutting edge of worm hob. The presented mathematical model of tooth flank of TA worm and worm wheel can be used e.g. to analyse the contact pattern of the gear.

Recent advances in engineering of tooth and tooth structures using postnatal dental cells

Directory of Open Access Journals (Sweden)

Masaki J. Honda

2010-02-01

This review focuses on the performance of postnatal and adult dental cells that have been used for generating teeth. Their ability to contribute to tooth development was assessed in the omentum or in the tooth socket. Adult dental cells were limited in their potential owing to various parameters. From these results described, new approaches for regenerated teeth are proposed in this review. One strategy to replace teeth is tooth root engineering using tissue from postnatal teeth. Since the enamel organ epithelium disappears after tooth maturation, the epithelial rest cells of Malassez were evaluated to determine their capacity to generate enamel. From these results, it is suggested that erupted mature teeth have cell sources with the capacity to produce tooth root. The development of biological approaches for tooth root regeneration using postnatal dental cells is promising and remains one of the greatest challenges in the dental field in the years to come.

Tooth - abnormal colors

Science.gov (United States)

... medlineplus.gov/ency/article/003065.htm Tooth - abnormal colors To use the sharing features on this page, please enable JavaScript. Abnormal tooth color is any color other than white to yellowish- ...

Paternal isodisomy of chromosome 6 in association with a maternal supernumerary marker chromosome (6)

Energy Technology Data Exchange (ETDEWEB)

James, R.S.; Crolla, J.A.; Sitch, F.L. [Salisbury District Hospital, Wiltshire (United Kingdom)] [and others

1994-09-01

Uniparental disomy may arise by a number of different mechanisms of aneuploidy correction. A population that has been identified as being at increased risk of aneuploidy are those individuals bearing supernumerary marker chromosomes (SMCs). There have been a number of cases reported of trisomy 21 in association with bi-satellited marker chromosomes have described two individuals with small inv dup (15) markers. One had paternal isodisomy of chromosome 15 and Angelman syndrome. The other had maternal heterodisomy (15) and Prader-Willi syndrome. At the Wessex Regional Genetics Laboratory we have conducted a search for uniparental disomy of the normal homologues of the chromosomes from which SMCs originated. Our study population consists of 39 probands with SMCs originating from a number of different autosomes, including 17 with SMCs of chromosome 15 origin. Using PCR amplification of microsatellite repeat sequences located distal to the regions included in the SMCs we have determined the parental origin of the two normal homologues in each case. We have identified paternal isodisomy of chromosome 6 in a female child with a supernumerary marker ring chromosome 6 in approximately 70% of peripheral blood lymphocytes. The marker was found to be of maternal origin. This is the second case of paternal isodisomy of chromosome 6 to be reported, and the first in association with a SMC resulting in a partial trisomy for a portion of the short arm of chromosome 6. In spite of this, the patient appears to be functioning appropriately for her age.

Bilateral fusion of permanent mandibular incisors: A case report

Directory of Open Access Journals (Sweden)

Saxena A

2008-05-01

Full Text Available This case report showing a classical presentation of bilateral fusion of permanent mandibular incisors in a child patient for dental attention. Fusion defined as the merger of two adjacent tooth germs producing one tooth. These teeth may be fused by enamel, dentin, or both. The fused crown is broader than non fused adjacent teeth and thus resembles gemination. However, tooth counting reveals decreased numbers. Fused teeth are rare in the permanent dentition. The incisors are reported to be fused in primary and permanent dentition, but bilateral fusion is a rare occurrence. Hence the case report of bilateral fusion in an 11-year-old boy is presented.

Comparative evaluation of fiber fuse models

International Nuclear Information System (INIS)

Davis, D.D.; Mettler, S.C.; DiGiovanni, D.J.

1997-01-01

A phenomenon which results in the catastrophic destruction of the guiding properties of an optical fiber has been observed at laser power densities on the order of 3 x 10 6 watts/cm 2 in the core. This phenomenon is characterized by the propagation of a bright visible light from the point of initiation toward the laser source. The term 'fiber fuse' has been used because of the similarity in appearance to a burning fuse. The fiber fuse has been shown to start when the end of the fiber is contacted. It has also been initiated spontaneously from mechanical splices. This paper reports experimental data gathered on the fiber fuse and discusses their relationship to proposed physical mechanisms

Fused Bead Analysis of Diogenite Meteorites

Science.gov (United States)

Mittlefehldt, D.W.; Beck, B.W.; McSween, H.Y.; Lee, C.T. A.

2009-01-01

Bulk rock chemistry is an essential dataset in meteoritics and planetary science [1]. A common method used to obtain the bulk chemistry of meteorites is ICP-MS. While the accuracy, precision and low detection limits of this process are advantageous [2], the sample size used for analysis (approx.70 mg) can be a problem in a field where small and finite samples are the norm. Fused bead analysis is another bulk rock analytical technique that has been used in meteoritics [3]. This technique involves forming a glass bead from 10 mg of sample and measuring its chemistry using a defocused beam on a microprobe. Though the ICP-MS has lower detection limits than the microprobe, the fused bead method destroys a much smaller sample of the meteorite. Fused bead analysis was initially designed for samples with near-eutectic compositions and low viscosities. Melts generated of this type homogenize at relatively low temperatures and produce primary melts near the sample s bulk composition [3]. The application of fused bead analysis to samples with noneutectic melt compositions has not been validated. The purpose of this study is to test if fused bead analysis can accurately determine the bulk rock chemistry of non-eutectic melt composition meteorites. To determine this, we conduct two examinations of the fused bead. First, we compare ICP-MS and fused bead results of the same samples using statistical analysis. Secondly, we inspect the beads for the presence of crystals and chemical heterogeneity. The presence of either of these would indicate incomplete melting and quenching of the bead.

Esthetic Reconstruction of Diastema with Adhesive Tooth-Colored Restorations and Hyaluronic Acid Fillers

Directory of Open Access Journals (Sweden)

Supawadee Naorungroj

2017-01-01

Full Text Available Objective. This report presents a comprehensive esthetic treatment with adhesive tooth-colored restorations in a combination with hyaluronic acid (HA fillers of diastema in an orthodontic patient with relapse. Case Report. A 36-year-old female patient consulted about 1.5–2 mm midline diastema after an orthodontic relapse of replacing missing central incisors with lateral incisors and dark-colored gingival tissue as a result of a metal post and core with porcelain fused to a metal (PFM crown at the left lateral incisor. Restorative treatments included replacing the PFM with all-ceramic material and placing a ceramic veneer on the right lateral incisor. To close the space, crown forms of both lateral incisors were altered. A direct resin composite was then used to reform right and left canines to a more ideal lateral incisor shape. An HA fillers injection was used to fill the remaining open gingival embrasure. Eighteen months after treatment, the interdental papilla remained stable and the patient was satisfied with the result. Conclusion. Esthetic reconstruction of diastema and open gingival embrasure in this case can be accomplished without orthodontic retreatment. Tooth-colored restorations and HA filler injection appear as a promising modality to address this patient’s esthetic concern.

Orthodontic Tooth Movement: A Historic Prospective.

Science.gov (United States)

Will, Leslie A

2016-01-01

The earliest report on orthodontic tooth movement in the English literature was published in 1911. Oppenheim carried out studies on baboons to determine what histologic changes occurred during tooth movement. Reitan and many others carried out research into the nature of tooth movement. The pressure-tension model of tooth movement developed from these studies, whereby the two sides of the tooth responded to forces as if in isolation. A second theory, proposed by Stuteville in 1938, was the hydraulic theory of tooth movement. In this theory, fluid from the vasculature, lymphatic system and intercellular spaces responds to the forces of tooth movement, damping the force and limiting movement. Bien and Baumrind expanded on this theory with their own studies in the 1960s. It is clear that both the pressure-tension and fluid flow concepts have merit, but considerable work needs to be done to ascertain the details so that tooth movement can be managed and controlled. © 2016 S. Karger AG, Basel.

Dentigerous cyst associated with multiple complex composite odontomas

Directory of Open Access Journals (Sweden)

Sangeeta P Wanjari

2011-01-01

Full Text Available Odontomas are considered to be hamartomatous malformations rather than true neoplasms. This most common odontogenic lesion results from the growth of completely differentiated epithelial and mesenchymal cells that give rise to ameloblasts and odontoblasts. Dentigerous cyst is an epithelium-lined sac enclosing the crown of an unerupted tooth. Apparently, the dentigerous cyst arises by the accumulation of fluid between reduced enamel epithelium and the tooth crown. Occasionally it is associated with supernumerary tooth or odontoma. We report a case of dentigerous cyst associated with complex composite odontoma and an impacted lateral incisor in a 30-year-old male patient.

Use of low fusing alloy in dentistry.

Science.gov (United States)

Wee, A G; Schneider, R L; Aquilino, S A

1998-11-01

Low fusing alloy has been used in dentistry for remount procedures in both fixed and removable prosthodontics, in implant prosthodontics for the fabrication of solid implant casts, in maxillofacial prosthetics as oral radiation shields, and in dental research for its unique properties. Previously, the use of low fusing alloy was thought to offer a high degree of dimensional accuracy. However, multiple in vitro studies have shown that its presumed dimensional accuracy may be questionable. This article reviews the physical properties, metallurgical considerations of low fusing alloy, its applications in dentistry, and a safe, simple method of using low fusing alloy.

[The use of computer-aided colorimeter in porcelain-fused-to-metal (PFM) crowns among patients with special colored teeth].

Science.gov (United States)

Fu, Yuan-fei; Weng, Wei-min

2004-02-01

To evaluate the roll of ShadeEye-NCC, a computer-aided colorimeter, in Porcelain-Fused-to-Metal crowns among patients with special colored Teeth. The first step was to choose the proper patients. The next was to use the colorimeter to measure the base shade of tooth and fabricate the PFM crowns according to the recipe given by the colorimeter. At last, the effects of the PFM crowns were evaluated subjectively by patients and doctor. The satisfaction rates of patients and doctor were 83.7% and 81.4% respectively, there was no significant difference between the two rates. The computer-aided colorimeter can offer good base shade recipe for fabricating PFM crowns of patients with special colored teeth.

Additive manufacturing of transparent fused quartz

Science.gov (United States)

Luo, Junjie; Hostetler, John M.; Gilbert, Luke; Goldstein, Jonathan T.; Urbas, Augustine M.; Bristow, Douglas A.; Landers, Robert G.; Kinzel, Edward C.

2018-04-01

This paper investigates a filament-fed process for additive manufacturing (AM) of fused quartz. Glasses such as fused quartz have significant scientific and engineering applications, which include optics, communications, electronics, and hermetic seals. AM has several attractive benefits such as increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research into glass AM has focused primarily on nonoptical applications. Fused quartz is studied here because of its desirability for use in high-quality optics due to its high transmissivity and thermal stability. Fused quartz filaments are fed into a CO2 laser-generated molten region, smoothly depositing material onto the workpiece. Spectroscopy and pyrometry are used to measure the thermal radiation incandescently emitted from the molten region. The effects of the laser power and scan speed are determined by measuring the morphology of single tracks. Thin walls are printed to study the effects of layer-to-layer height. This information is used to deposit solid pieces including a cylindrical-convex shape capable of focusing visible light. The transmittance and index homogeneity of the printed fused quartz are measured. These results show that the filament-fed process has the potential to print transmissive optics.

[Assessment of tooth bleaching efficacy with spectrophotometer].

Science.gov (United States)

Zhu, Wenhao; Liu, Chang; Pan, Jie

2014-06-01

To analyze the changes in CIE L*, a*, and b* at cervical, body, and incisal sites after tooth bleaching by using a spectrophotometer. Sixty-seven intact and healthy maxillary central incisors were in-vestigated. These incisors were darker than A3 according to the Vita Classical shade guide. The CIE tooth shade parameters L*, a*, and b* were simultaneously recorded at three tooth areas (cervical, body, and incisal) with a spectrophotometer before and after tooth bleaching (35%H2O2 coordinating with Beyond whitening accelerator irradiating). The shade dif-ferential (DeltaE) was calculated. ANOVA, paired t-test, and Pearson correlation analysis were used for data analysis. The efficacy rates of tooth bleaching were satisfactory, with 86.6%, 86.6%, and 85.1% in the cervical, body, and incisal sites, respectively. The average values of DeltaE were 5.09, 4.44, and 4.40 in the cervical, body, and incisal sites. Tooth bleaching significantly increased L* and significantly decreased a* and b* in all tooth areas (P spectrophotometer could objectively evaluate the whitening effect of tooth bleaching at the different tooth sites. The tooth bleaching system (35%H202 coordinating with Beyond whitening accelerator irradiating) exerts powerful bleaching actions in most of the tooth areas investigated. The order of tooth bleaching effectiveness is cervicalbody>incisal. Yellow coloration is decreased mainly at the cervical site, and brightness was increased mostly at theincisal site. The effectiveness of tooth bleaching increases as the baseline b* value increases.

Overview of Tooth Disorders

Science.gov (United States)

... teeth using a thin resin cement. Bleaching, or tooth whitening, is a process used by dentists to lighten ... following? Damage to only the hard outer surface (enamel) of the tooth An incomplete fracture of a ...

Porphyrins Fused with Unactivated Polycyclic Aromatic Hydrocarbons

KAUST Repository

Diev, Vyacheslav V.; Schlenker, Cody W.; Hanson, Kenneth; Zhong, Qiwen; Zimmerman, Jeramy D.; Forrest, Stephen R.; Thompson, Mark E.

2012-01-01

A systematic study of the preparation of porphyrins with extended conjugation by meso,β-fusion with polycyclic aromatic hydrocarbons (PAHs) is reported. The meso-positions of 5,15-unsubstituted porphyrins were readily functionalized with PAHs. Ring fusion using standard Scholl reaction conditions (FeCl 3, dichloromethane) occurs for perylene-substituted porphyrins to give a porphyrin β,meso annulated with perylene rings (0.7:1 ratio of syn and anti isomers). The naphthalene, pyrene, and coronene derivatives do not react under Scholl conditions but are fused using thermal cyclodehydrogenation at high temperatures, giving mixtures of syn and anti isomers of the meso,β-fused porphyrins. For pyrenyl-substituted porphyrins, a thermal method gives synthetically acceptable yields (>30%). Absorption spectra of the fused porphyrins undergo a progressive bathochromic shift in a series of naphthyl (λ max = 730 nm), coronenyl (λ max = 780 nm), pyrenyl (λ max = 815 nm), and perylenyl (λ max = 900 nm) annulated porphyrins. Despite being conjugated with unsubstituted fused PAHs, the β,meso-fused porphyrins are more soluble and processable than the parent nonfused precursors. Pyrenyl-fused porphyrins exhibit strong fluorescence in the near-infrared (NIR) spectral region, with a progressive improvement in luminescent efficiency (up to 13% with λ max = 829 nm) with increasing degree of fusion. Fused pyrenyl-porphyrins have been used as broadband absorption donor materials in photovoltaic cells, leading to devices that show comparatively high photovoltaic efficiencies. © 2011 American Chemical Society.

Porphyrins Fused with Unactivated Polycyclic Aromatic Hydrocarbons

KAUST Repository

Diev, Vyacheslav V.

2012-01-06

A systematic study of the preparation of porphyrins with extended conjugation by meso,β-fusion with polycyclic aromatic hydrocarbons (PAHs) is reported. The meso-positions of 5,15-unsubstituted porphyrins were readily functionalized with PAHs. Ring fusion using standard Scholl reaction conditions (FeCl 3, dichloromethane) occurs for perylene-substituted porphyrins to give a porphyrin β,meso annulated with perylene rings (0.7:1 ratio of syn and anti isomers). The naphthalene, pyrene, and coronene derivatives do not react under Scholl conditions but are fused using thermal cyclodehydrogenation at high temperatures, giving mixtures of syn and anti isomers of the meso,β-fused porphyrins. For pyrenyl-substituted porphyrins, a thermal method gives synthetically acceptable yields (>30%). Absorption spectra of the fused porphyrins undergo a progressive bathochromic shift in a series of naphthyl (λ max = 730 nm), coronenyl (λ max = 780 nm), pyrenyl (λ max = 815 nm), and perylenyl (λ max = 900 nm) annulated porphyrins. Despite being conjugated with unsubstituted fused PAHs, the β,meso-fused porphyrins are more soluble and processable than the parent nonfused precursors. Pyrenyl-fused porphyrins exhibit strong fluorescence in the near-infrared (NIR) spectral region, with a progressive improvement in luminescent efficiency (up to 13% with λ max = 829 nm) with increasing degree of fusion. Fused pyrenyl-porphyrins have been used as broadband absorption donor materials in photovoltaic cells, leading to devices that show comparatively high photovoltaic efficiencies. © 2011 American Chemical Society.

Dental Caries (Tooth Decay)

Science.gov (United States)

... Materials Contact Us Home Research Data & Statistics Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

Dental Caries (Tooth Decay)

Science.gov (United States)

... Contact Us Home Research Data & Statistics Share Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

SINA: A test system for proximity fuses

Science.gov (United States)

Ruizenaar, M. G. A.

1989-04-01

SINA, a signal generator that can be used for testing proximity fuses, is described. The circuitry of proximity fuses is presented; the output signal of the RF circuit results from a mixing of the emitted signal and received signal that is Doppler shifted in frequency by the relative motion of the fuse with respect to the reflecting target of surface. With SINA, digitized and stored target and clutter signals (previously measured) can be transformed to Doppler signals, for example during a real flight. SINA can be used for testing fuse circuitry, for example in the verification of results of computer simulations of the low frequency Doppler signal processing. The software of SINA and its use are explained.

30 CFR 57.12036 - Fuse removal or replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuse removal or replacement. 57.12036 Section 57.12036 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Electricity Surface and Underground § 57.12036 Fuse removal or replacement. Fuses shall not be removed or...

Clinical Course and Treatment of a Triplication Defect: A Case Report

Directory of Open Access Journals (Sweden)

Suruchi Juneja

2015-10-01

Full Text Available Fusion is an anomaly manifested in both deciduous and permanent dentitions. Fu- sion of dental tissues in the primary dentition is of clinical significance owing to the challenges in treatment of the affected teeth and aberrations encountered in development and eruption of their successors. Triple tooth refers to the union of three separate tooth entities. It can occur by fusion, germination, concrescence or a combination of both fusion and germination. Triplication is rarely encountered in the deciduous dentition. The case presented herein describes triplication of de- ciduous incisors and a supernumerary tooth. The diagnosis was confirmed with the help of radiographs, CT imaging and histological examination. Retention of the triple tooth had led to crossbite. Extraction was performed for the triplicated tooth and crossbite was corrected using a composite inclined plane.

Clinical Course and Treatment of a Triplication Defect: A Case Report.

Science.gov (United States)

Juneja, Suruchi; Verma, Kanika Gupta; Singh, Navneet; Sidhu, Gagandeep Kaur; Kaur, Navneet

2015-05-01

Fusion is an anomaly manifested in both deciduous and permanent dentitions. Fusion of dental tissues in the primary dentition is of clinical significance owing to the challenges in treatment of the affected teeth and aberrations encountered in development and eruption of their successors. Triple tooth refers to the union of three separate tooth entities. It can occur by fusion, germination, concrescence or a combination of both fusion and germination. Triplication is rarely encountered in the deciduous dentition. The case presented herein describes triplication of deciduous incisors and a supernumerary tooth. The diagnosis was confirmed with the help of radiographs, computed tomography (CT) imaging and histological examination. Retention of the triple tooth had led to crossbite. Extraction was performed for the triple tooth and crossbite was corrected using a composite inclined plane.

Generating User Interfaces with the FUSE-System

OpenAIRE

Frank Lonczewski; Siegfried Schreiber

2017-01-01

With the FUSE(Formal User interface Specification Environment)-System we present a methodology and a set of integrated tools for the automatic generation of graphical user interfaces. FUSE provides tool-based support for all phases (task-, user-, problem domain analysis, design of the logical user interface, design of user interface in a particular layout style) of the user interface development process. Based on a formal specification of dialogue- and layout guidelines, FUSE allows the autom...

Fluoridation and tooth wear in Irish adults.

LENUS (Irish Health Repository)

Burke, F M

2010-10-01

The aim of this study was to determine the prevalence of tooth wear in adults in Ireland and its relationship with water fluoridation. The National Survey of Adult Oral Health was conducted in 2000\\/2001. Tooth wear was determined using a partial mouth examination assessing the upper and lower anterior teeth. A total of 2456 subjects were examined. In this survey, increasing levels and severity of tooth wear were associated with ageing. Men were more affected by tooth wear and were more likely to be affected by severe tooth wear than women. It was found that age, and gender were significant predictors of tooth wear (P < 0.01). Overall, there was no significant relationship between fluoridation and tooth wear in this study.

Investigation of fused silica dynamic behaviour

International Nuclear Information System (INIS)

Malaise, F.; Chevalier, J.M.; Bertron, I.; Malka, F.

2006-01-01

The survivability of the fused silica shields to shrapnel impacts is a key factor for the affordable operation of the intense laser irradiation future facility Laser Mega Joule (LMJ). This paper presents experimental data and computational modelling for LMJ fused silica upon shock wave loading and unloading. Gas-gun flyer plate impact and explosively driven tests have been conducted to investigate the dynamic behaviour of this material. Hugoniot states and the Hugoniot Elastic Limit of LMJ fused silica have been obtained. These experimental data are useful for determining some constitutive model constants of the 'Crack-Model', a continuum tensile and compressive failure model with friction based. This model has been improved by taking into account nonlinear elasticity. The numerical results obtained by performing computations of the previous tests and some ballistic impact tests are discussed. The numerical comparisons with the experimental data show good agreement. Further developments to simulate the permanent densification and the solid-to-solid phase transformation of fused silica are required. (authors)

Mesiodens: review of literature and management options for two cases

African Journals Online (AJOL)

Mesiodens is a supernumerary tooth present in the midline between the two central incisors. It usually results in oral problems such as malocclusion, food impaction, poor aesthetics and cyst formation. In our environment, literature is scarce on the presentation and effects of this anomaly. This paper reviews the available ...

30 CFR 56.12036 - Fuse removal or replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuse removal or replacement. 56.12036 Section 56.12036 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... § 56.12036 Fuse removal or replacement. Fuses shall not be removed or replaced by hand in an energized...

30 CFR 57.6502 - Safety fuse.

Science.gov (United States)

2010-07-01

... blasthole detonates. (d) Fuse shall be cut and capped in dry locations. (e) Blasting caps shall be crimped... the primer and the explosive material are securely in place. (g) Safety fuse shall be ignited only... to be fired, electric initiation systems, igniter cord and connectors, or other nonelectric...

30 CFR 56.6502 - Safety fuse.

Science.gov (United States)

2010-07-01

... be cut and capped in dry locations. (e) Blasting caps shall be crimped to fuse only with implements... material are securely in place. (g) Safety fuse shall be ignited only with devices designed for that... initiation systems, igniter cord and connectors, or other nonelectric initiation systems shall be used...

Investigation of EPR signals on tooth enamel

Energy Technology Data Exchange (ETDEWEB)

Pavlenko, A; Mironova-Ulmane, N; Polakov, M; Riekstina, D [Institute of Solid State Physics, University of Latvia, Riga (Latvia)

2007-12-15

Calcified tissues are involved in continues metabolic process in human organism exchanging a number of chemical elements with environment. The rate of biochemical reactions is tissue dependent and the slowest one at the tooth enamel, the most mineralized tissue of human organism. The long time stability and unique chemical composition make tooth enamel suitable for number of application. The assessment of individual radiation dose by Electron Paramagnetic Resonance (EPR) and evaluations of elemental composition by Instrumentation Neutron Activation Analysis (INAA) are the well known procedures where properties of tooth enamel intensively used. The current work is focused on investigation of EPR signals and determination of chemical composition on several teeth samples having different origin. The EPR spectra and INAA element content of milk tooth, caries tooth, and paradantose tooth have been compared to each other. The results showed that the intensity of EPR signal is much higher for the caries tooth than the for paradantose tooth that is in agreement with depleted Ca content.

Tooth whitening: what we now know.

Science.gov (United States)

Carey, Clifton M

2014-06-01

Current research about tooth whitening shows that it is safe and effective when manufacturer's protocol is followed, yet there are risks of which the profession and users should be aware. This update provides a summary of current research and assessment of the safety and efficacy of tooth whitening regimens. Tooth whitening has become one of the most frequently requested dental procedures by the public. The public has come to demand whiter, more perfect smiles and in response many choices for tooth whitening have been made available. These include home-based products such as toothpastes, gels, and films, as well as in-office based systems where products containing highly concentrated bleaching agents are applied under professional supervision. The profession and public have been aware of certain risks related to tooth whitening such as increased tooth sensitivity and gingival irritation. New research has shown that there are other risks such as tooth surface roughening and softening, increased potential for demineralization, degradation of dental restorations, and unacceptable color change of dental restorations. The new research is also focused on optimizing whitening procedures to reduce tooth sensitivity and to increase the persistence of the whitening. Current reports in the literature are reviewed that are related to the use of peroxide based whitening methods. These reports include in vitro studies for method optimization and mechanism as well as clinical studies on effects of various whitening regimens. When manufacturer's instructions are followed, hydrogen peroxide and carbamide peroxide based tooth whitening is safe and effective. Patients should be informed of the risks associated with tooth whitening and instructed on identification of adverse occurrences so that they may seek professional help as needed. Copyright © 2014 Elsevier Inc. All rights reserved.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Science.gov (United States)

D'Emic, Michael D; Whitlock, John A; Smith, Kathlyn M; Fisher, Daniel C; Wilson, Jeffrey A

2013-01-01

Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently evolved the highest known tooth replacement rates among archosaurs.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Directory of Open Access Journals (Sweden)

Michael D D'Emic

Full Text Available BACKGROUND: Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. METHODOLOGY/PRINCIPAL FINDINGS: We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days. Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. CONCLUSIONS/SIGNIFICANCE: Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size, and derived titanosaurs and

Fused aromatic thienopyrazines: structure, properties and function

KAUST Repository

Mondal, Rajib; Ko, Sangwon; Bao, Zhenan

2010-01-01

Recent development of a fused aromatic thieno[3.4-b]pyrazine system and their application in optoelectronic devices are reviewed. Introduction of a fused aromatic unit followed by side chain engineering, dramatically enhanced the charge carrier

Endodontic Treatment of an Anomalous Anterior Tooth with the Aid of a 3-dimensional Printed Physical Tooth Model.

Science.gov (United States)

Byun, Chanhee; Kim, Changhwan; Cho, Seungryong; Baek, Seung Hoon; Kim, Gyutae; Kim, Sahng G; Kim, Sun-Young

2015-06-01

Endodontic treatment of tooth formation anomalies is a challenge to clinicians and as such requires a complete understanding of the aberrant root canal anatomy followed by careful root canal disinfection and obturation. Here, we report the use of a 3-dimensional (3D) printed physical tooth model including internal root canal structures for the endodontic treatment of a challenging tooth anomaly. A 12-year-old boy was referred for endodontic treatment of tooth #8. The tooth showed class II mobility with swelling and a sinus tract in the buccal mucosa and periapical radiolucency. The tooth presented a very narrow structure between the crown and root by distal concavity and a severely dilacerated root. Moreover, a perforation site with bleeding and another ditching site were identified around the cervical area in the access cavity. A translucent physical tooth model carrying the information on internal root canal structures was built through a 3-step process: data acquisition by cone-beam computed tomographic scanning, virtual modeling by image processing, and manufacturing by 3D printing. A custom-made guide jig was then fabricated to achieve a safe and precise working path to the root canal. Endodontic procedures including access cavity preparation were performed using the physical tooth model and the guide jig. At the 7-month follow-up, the endodontically treated tooth showed complete periapical healing with no clinical signs and symptoms. This case report describes a novel method of endodontic treatment of an anomalous maxillary central incisor with the aid of a physical tooth model and a custom-made guide jig via 3D printing technique. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Primary culprit for tooth loss!!

OpenAIRE

Nuvvula, Sailavanya; Chava, Vijay Kumar; Nuvvula, Sivakumar

2016-01-01

Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A quest...

Atypical Odontalgia (Phantom Tooth Pain)

Science.gov (United States)

... atypical facial pain, phantom tooth pain, or neuropathic orofacial pain, is characterized by chronic pain in a tooth ... such as a specialist in oral medicine or orofacial pain. The information contained in this monograph is for ...

Tooth breakage in patients injected with 224Ra

International Nuclear Information System (INIS)

Sonnabend, E.; Spiess, H.; Mays, C.W.

1986-01-01

Tooth breakage has been common among the 224 Ra patients, especially those injected as teenagers. The fracture of 1 or more teeth was reported by 26% (8/31) of boys and 23% (7/30) of girls injected with 224 Ra at 16-20 years of age. Combining results from all age groups, the incidence of tooth fractures increased significantly with dose (P=0.01). Unlike the normal loss of permanent teeth by periodontal disease, in which the entire tooth is lost, the tooth loss following 224 Ra injection was primarily from tooth resorption near the gum line causing the tooth crowns to break off easily. Eventually the tooth roots may either become incorporated into the jawbone or are resorbed and replaced with bone. These tooth fractures resembled those observed in the U.S. radium dial painters and in dogs injected with bone-seeking α-emitters. (orig.)

Three-dimensional printing of transparent fused silica glass

Science.gov (United States)

Kotz, Frederik; Arnold, Karl; Bauer, Werner; Schild, Dieter; Keller, Nico; Sachsenheimer, Kai; Nargang, Tobias M.; Richter, Christiane; Helmer, Dorothea; Rapp, Bastian E.

2017-04-01

Glass is one of the most important high-performance materials used for scientific research, in industry and in society, mainly owing to its unmatched optical transparency, outstanding mechanical, chemical and thermal resistance as well as its thermal and electrical insulating properties. However, glasses and especially high-purity glasses such as fused silica glass are notoriously difficult to shape, requiring high-temperature melting and casting processes for macroscopic objects or hazardous chemicals for microscopic features. These drawbacks have made glasses inaccessible to modern manufacturing technologies such as three-dimensional printing (3D printing). Using a casting nanocomposite, here we create transparent fused silica glass components using stereolithography 3D printers at resolutions of a few tens of micrometres. The process uses a photocurable silica nanocomposite that is 3D printed and converted to high-quality fused silica glass via heat treatment. The printed fused silica glass is non-porous, with the optical transparency of commercial fused silica glass, and has a smooth surface with a roughness of a few nanometres. By doping with metal salts, coloured glasses can be created. This work widens the choice of materials for 3D printing, enabling the creation of arbitrary macro- and microstructures in fused silica glass for many applications in both industry and academia.

Autotransplantation donor tooth site harvesting using piezosurgery

OpenAIRE

Ylikontiola, Leena P.; S?ndor, George K.

2016-01-01

Abstract Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its ...

Fuse Modeling for Reliability Study of Power Electronic Circuits

DEFF Research Database (Denmark)

Bahman, Amir Sajjad; Iannuzzo, Francesco; Blaabjerg, Frede

2017-01-01

This paper describes a comprehensive modeling approach on reliability of fuses used in power electronic circuits. When fuses are subjected to current pulses, cyclic temperature stress is introduced to the fuse element and will wear out the component. Furthermore, the fuse may be used in a large......, and rated voltage/current are opposed to shift in time to effect early breaking during the normal operation of the circuit. Therefore, in such cases, a reliable protection required for the other circuit components will not be achieved. The thermo-mechanical models, fatigue analysis and thermo...

Proteomic analysis of human tooth pulp: proteomics of human tooth.

Science.gov (United States)

Eckhardt, Adam; Jágr, Michal; Pataridis, Statis; Mikšík, Ivan

2014-12-01

The unique pulp-dentin complex demonstrates strong regenerative potential, which enables it to respond to disease and traumatic injury. Identifying the proteins of the pulp-dentin complex is crucial to understanding the mechanisms of regeneration, tissue calcification, defense processes, and the reparation of dentin by dental pulp. The lack of knowledge of these proteins limits the development of more efficient therapies. The proteomic profile of human tooth pulp was investigated and compared with the proteome of human dentin and blood. The samples of tooth pulp were obtained from 5 sound permanent human third molars of 5 adults (n = 5). The extracted proteins were separated by 2-dimensional gel electrophoresis, analyzed by nano-liquid chromatography tandem mass spectrometry, and identified by correlating mass spectra to the proteomic databases. A total of 342 proteins were identified with high confidence, and 2 proteins were detected for the first time in an actual human sample. The identified tooth pulp proteins have a variety of functions: structural, catalytic, transporter, protease activity, immune response, and many others. In a comparison with dentin and blood plasma, 140 (pulp/dentin) shared proteins were identified, 37 of which were not observed in plasma. It can be suggested that they might participate in the unique pulp-dentin complex. This proteomic investigation of human tooth pulp, together with the previously published study of human dentin, is one of the most comprehensive proteome lists of human teeth to date. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Test Tube Tooth: The Next Big Thing.

Science.gov (United States)

Yadav, Preeti; Tahir, Mohammed; Yadav, Harsh; Sureka, Rakshit; Garg, Aarti

2016-06-01

Unlike some vertebrates and fishes, humans do not have the capacity for tooth regeneration after the loss of permanent teeth. Although artificial replacement with removable dentures, fixed prosthesis and implants is possible through advances in the field of prosthetic dentistry, it would be ideal to recreate a third set of natural teeth to replace lost dentition. For many years now, researchers in the field of tissue engineering have been trying to bioengineer dental tissues as well as whole teeth. In order to attain a whole tooth through dental engineering, that has the same or nearly same biological, mechanical and physical properties of a natural tooth, it's necessary to deal with all the cells and tissues which are concerned with the formation, maintenance and repair of the tooth. In this article we review the steps involved in odontogenesis or organogenesis of a tooth and progress in the bioengineering of a whole tooth.

Supernumerary and absent limbs and digits of the lower limb: a review of the literature.

Science.gov (United States)

Klaassen, Zachary; Shoja, Mohammadali M; Tubbs, R Shane; Loukas, Marios

2011-07-01

Anatomical history over centuries includes description of a wide variety of malformations involving the lower limbs. This article offers an organized review of these diverse abnormalities, including new understanding of mechanisms through recent discoveries in genetics and molecular biology. In 19th century Europe, a number of unique anomalies were reported, as well as evidence of foot amputations occurring in ancient Peruvian culture. Embryologically, the limbs develop early, with the lower limb being recognizable for the first time at stage 13 of development. By stage 23, the toes are clearly defined and by birth, although the legs appear bowed, the tibia and fibula are straight. Removal of the apical ectodermal ridge results in cessation of limb development, conversely, a second apical ectodermal ridge results in duplication of distal structures. Supernumerary limbs have been documented to occur as part of a teratoma with unique morphology and accompanying blood supply. Additionally, many examples of polydactyly occur in the foot postulating that deletion of chromosome 22q11 is involved in postaxial polydactyly. Such deletions occur near the middle of the chromosome at a location designated q11.2 (i.e., on the long arm of one of the pair of chromosomes 22) and this syndrome is also referred to as DiGeorge syndrome, which has a prevalence estimated at 1:4,000. Absence of the lower limbs has also been noted, with hypoplasia of the fibula being the most common manifestation of congenital bone absences in the lower limb. In addition to fibular aplasia, cases of tibial aplasia have been reported. This article is important for surgeons attempting correctional repair of lower limb anomalies, as well as providing analysis of the historical, anatomical and clinical aspects of supernumerary and absent limbs and digits for the lower limb. Copyright © 2011 Wiley-Liss, Inc.

A Supernumerary Nipple-Like Clinical Presentation of Lymphangioma Circumscriptum.

Science.gov (United States)

Taylor, Dustin; Kash, Natalie; Silapunt, Sirunya

2018-01-01

Lymphangioma circumscriptum is a superficially localized variant of lymphangioma. The characteristic clinical presentation is a "frogspawn" grouping of vesicles or papulovesicles on the proximal limb or limb girdle areas. Though most lymphangiomas develop congenitally, the lymphangioma circumscriptum subtype is known to present in adults. We report a case of lymphangioma circumscriptum on the left inframammary area of an African American female with an unusual supernumerary nipple-like clinical presentation. Our patient presented with a firm, smooth, hypopigmented papule, and the clinical diagnosis of keloid was made initially. However, she returned reporting growth of the lesion and was noted to have a firm, exophytic, lobulated, pink to skin-colored nodule. Histopathological examination demonstrated dilated lymphatic vessels, consistent with the diagnosis of lymphangioma. The presentation as a firm, hypopigmented papule and later exophytic, lobulated, skin-colored nodule in our case represents a clinical presentation of lymphangioma circumscriptum not previously described in the literature. Correct diagnosis in lymphangioma circumscriptum is vital, as recurrence following surgical resection and secondary development of lymphangiosarcoma and squamous cell carcinoma following treatment with radiation have been reported. Thus, it is important to consider lymphangioma circumscriptum in the differential of similar lesions in the future to allow appropriate diagnosis, treatment, and monitoring.

Influence of System Parameters on Fuse Protection Use in Regenerative DC Drives

Directory of Open Access Journals (Sweden)

Isa Salman Qamber

2009-06-01

Full Text Available Current limiting fuses are widely used to protect the thyristors in DC drive systems. One very important problem is the choice of the correct voltage rating for fuses protecting regenerative DC drives, where many types of fault may occur, which makes fuse protection difficult. In the event of a commutation failure while regenerating, the fuses need to interrupt the loop supplied by the AC and DC voltages acting in series, which is the most difficult case for protection by fuses. In this paper a detailed study of the complete interruption process has been investigated by modeling of arcing process of the fuse protection against the regenerative circuit internal commutation fault. The effect of varying the motor time constant, supply impedance, number of fuses used to clear the fault and DC machine rating on the total transient response is studied. The model of a 200 A fuse is employed in this study. Fuses in series with both the semiconductor devices (F1 and fuses in AC lines (F2 are considered. Comparison was made between arc energy produced for fuses protecting the regenerative circuit if failure occurs, with the arc energy produced in a standard AC test in order to investigate the required voltage rating for the fuse.

Multiphoton microscopy imaging of developing tooth germs

Directory of Open Access Journals (Sweden)

Pei-Yu Pan

2014-01-01

Conclusion: In this study, a novel multiphoton microscopy database of images from developing tooth germs in mice was set up. We confirmed that multiphoton laser microscopy is a powerful tool for investigating the development of tooth germ and is worthy for further application in the study of tooth regeneration.

Fused aromatic thienopyrazines: structure, properties and function

KAUST Repository

Mondal, Rajib

2010-01-01

Recent development of a fused aromatic thieno[3.4-b]pyrazine system and their application in optoelectronic devices are reviewed. Introduction of a fused aromatic unit followed by side chain engineering, dramatically enhanced the charge carrier mobility in thin film transistor devices and mobilities up to 0.2 cm2/Vs were achieved. The optoelectronic properties of these fused aromatic thienopyrazine polymers (Eg = 1.3 to 1.6 eV, HOMO = -4.9 to -5.2 V) were tuned by introduction of various fused aromatic rings within thienopyrazine. By balancing the fundamental properties of these polymers, both high charge carrier mobilities and moderate PCEs in solar cells were achieved. Further, effects of copolymerizing units are discussed. Low band gap semiconducting polymer (Eg ∼ 1 eV) with high field effect mobility (0.044 cm2/Vs) was obtained using cyclopentadithiophene as copolymerizing unit. Finally, a molecular design approach to enhance the absorption coefficients is discussed, which resulted in improved power conversion efficiency in bulk heterojunction solar cells. © 2010 The Royal Society of Chemistry.

Analysis of tooth tissues using Raman spectroscopy

International Nuclear Information System (INIS)

Timchenko, E.V.; Timchenko, P.E.; Kulabukhova, A.Yu.; Volova, L.T.; Rosenbaum, A.Yu.

2016-01-01

The results of experimental studies of healthy tooth tissue and tooth tissues during caries disease are presented. Features of Raman spectrum of tooth tissues during caries disease are obtained: the main changes are detected at wavenumbers 956 cm -1 .1069 cm -1 . corresponding to phosphates. and 1241 cm -1 . 1660 cm -1 . corresponding to collagen III and collagen I. respectively. Were introduced criteria allowing to detect caries and to identify weakening of tooth tissues. preceding the caries. The reliability of research results is confirmed by scanning electron microscopy. (paper)

Functional Use Database (FUse)

Data.gov (United States)

U.S. Environmental Protection Agency — There are five different files for this dataset: 1. A dataset listing the reported functional uses of chemicals (FUse) 2. All 729 ToxPrint descriptors obtained from...

Process for manufacturing hollow fused-silica insulator cylinder

Science.gov (United States)

Sampayan, Stephen E.; Krogh, Michael L.; Davis, Steven C.; Decker, Derek E.; Rosenblum, Ben Z.; Sanders, David M.; Elizondo-Decanini, Juan M.

2001-01-01

A method for building hollow insulator cylinders that can have each end closed off with a high voltage electrode to contain a vacuum. A series of fused-silica round flat plates are fabricated with a large central hole and equal inside and outside diameters. The thickness of each is related to the electron orbit diameter of electrons that escape the material surface, loop, and return back. Electrons in such electron orbits can support avalanche mechanisms that result in surface flashover. For example, the thickness of each of the fused-silica round flat plates is about 0.5 millimeter. In general, the thinner the better. Metal, such as gold, is deposited onto each top and bottom surface of the fused-silica round flat plates using chemical vapor deposition (CVD). Eutectic metals can also be used with one alloy constituent on the top and the other on the bottom. The CVD, or a separate diffusion step, can be used to defuse the deposited metal deep into each fused-silica round flat plate. The conductive layer may also be applied by ion implantation or gas diffusion into the surface. The resulting structure may then be fused together into an insulator stack. The coated plates are aligned and then stacked, head-to-toe. Such stack is heated and pressed together enough to cause the metal interfaces to fuse, e.g., by welding, brazing or eutectic bonding. Such fusing is preferably complete enough to maintain a vacuum within the inner core of the assembled structure. A hollow cylinder structure results that can be used as a core liner in a dielectric wall accelerator and as a vacuum envelope for a vacuum tube device where the voltage gradients exceed 150 kV/cm.

Surgical-orthodontic treatment of Class III malocclusion with agenesis of lateral incisor and unerupted canine

Directory of Open Access Journals (Sweden)

Bruno Boaventura Vieira

2013-06-01

Full Text Available INTRODUCTION: Orthodontic-surgical treatment was performed in patient with skeletal Class III malocclusion due to exceeding mandibular growth. Patient also presented upper and lower dental protrusion, overjet of -3.0 mm, overbite of -1.0 mm, congenital absence of tooth #22, teeth #13 and supernumerary impaction, tooth #12 with conoid shape and partly erupted in supraversion, prolonged retention of tooth #53, tendency to vertical growth of the face and facial asymmetry. The discrepancy on the upper arch was -2.0 mm and -5.0 mm on the lower arch. METHODS: The pre-surgical orthodontic treatment was performed with extractions of the teeth #35 and #45. On the upper arch, teeth #53, #12 and supernumerary were extracted to accomplish the traction of the impacted canine. The spaces of the lower extractions were closed with mesialization of posterior segment. After aligning and leveling the teeth, extractions spaces closure and correct positioning of teeth on the bone bases, the correct intercuspation of the dental arch, with molars and canines in Angle's Class I, coincident midline, normal overjet and overbite and ideal torques, were evaluated through study models. The patient was submitted to orthognathic surgery and then the post-surgical orthodontic treatment was finished. RESULTS: The Class III malocclusion was treated establishing occlusal and facial normal standards.

29 CFR 1926.907 - Use of safety fuse.

Science.gov (United States)

2010-07-01

... way shall be forbidden. (b) The hanging of a fuse on nails or other projections which will cause a...-called “drop fuse” method of dropping or pushing a primer or any explosive with a lighted fuse attached...

Primary culprit for tooth loss!!

Directory of Open Access Journals (Sweden)

Sailavanya Nuvvula

2016-01-01

Full Text Available Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A questionnaire containing 10 items was distributed to the dental practitioners, which included age, gender, no of teeth indicated for extraction, the reason for extraction, and the periodontal parameters that are involved with the extracted tooth and were requested to complete the form on every extraction they were to undertake. the study form was collected at the end of the study period and data was subjected to statistical analysis. Results: A total of 502 patients were enrolled during the study period, and a total of 1055 teeth were extracted for several reasons. we found that 51.14%extractions are due to dental caries in case of 20-30years age groups, which is more when compared to tooth loss due to periodontal diseases in this age group. whereas in case of >40years of age group periodontal diseases account for 54.11%, and dental caries accounts for only 29.11%. Showing more teeth were lost due to periodontal disease. Conclusion: therefore we concluded that, caries is the dominant reason for extraction in patients with 20–30 years of age while periodontal disease accounts for the majority of tooth extraction in patients older than 40 years.

Dedication for Safety-Related Fuses used in Class-1E Power System

International Nuclear Information System (INIS)

Hong, Younghee

2014-01-01

The safety-related fuses used in class-1E power system provide overcurrent protection for electrical system and isolate the class 1E circuit from a fault or overload condition. These days, the number of nuclear grade suppliers has been reduced. Accordingly, commercial grade, instead of safety-related, fuses are procured and used in the utilities through the dedication process. Therefore, this paper introduces the commercial grade fuse dedication process/engineering and how to assure the quality requirements with this process and engineering. The fuses used in class-1E power system are to protect overcurrent and to isolate fault. Therefore the fuse for acceptance in order to improve the quality and reliability for commercial grade fuses shall be dedicated. The fuse resistance value may be useful as an indicator of acceptance. The current carrying capacity test can change the fuse performance properties. Therefore these critical characteristics are needed for additional review and analysis with fuse manufactures

Tooth wear and wear investigations in dentistry.

Science.gov (United States)

Lee, A; He, L H; Lyons, K; Swain, M V

2012-03-01

Tooth wear has been recognised as a major problem in dentistry. Epidemiological studies have reported an increasing prevalence of tooth wear and general dental practitioners see a greater number of patients seeking treatment with worn dentition. Although the dental literature contains numerous publications related to management and rehabilitation of tooth wear of varying aetiologies, our understanding of the aetiology and pathogenesis of tooth wear is still limited. The wear behaviour of dental biomaterials has also been extensively researched to improve our understanding of the underlying mechanisms and for the development of restorative materials with good wear resistance. The complex nature of tooth wear indicates challenges for conducting in vitro and in vivo wear investigations and a clear correlation between in vitro and in vivo data has not been established. The objective was to critically review the peer reviewed English-language literature pertaining to prevalence and aetiology of tooth wear and wear investigations in dentistry identified through a Medline search engine combined with hand-searching of the relevant literature, covering the period between 1960 and 2011. © 2011 Blackwell Publishing Ltd.

Is tooth wear in the primary dentition predictive of tooth wear in the permanent dentition? Report from a longitudinal study.

LENUS (Irish Health Repository)

Harding, M A

2010-03-01

To determine the prevalence of tooth wear in the permanent dentition of a sample of 12-year-old school children and establish whether an association exists between tooth wear recorded now and tooth wear recorded in their primary dentition at age five.

The origin of the lower fourth molar in canids, inferred by individual variation

Directory of Open Access Journals (Sweden)

Masakazu Asahara

2016-11-01

Full Text Available Background An increase in tooth number is an exception during mammalian evolution. The acquisition of the lower fourth molar in the bat-eared fox (Otocyon megalotis, Canidae, Carnivora, Mammalia is one example; however, its developmental origin is not clear. In some canids (Canidae, individual variation exist as supernumerary molar M4. This study focuses on the acquisition of the lower fourth molar in canids and proposes that the inhibitory cascade model can explain its origin. Methods Occlusal view projected area of lower molars was determined from 740 mandibles obtained from Canis latrans, Nyctereutes procyonoides, and Urocyon cinereoargenteus museum specimens. For each molar, relative sizes of molars (M2/M1 and M3/M1 scores affected by inhibition/activation dynamics during development, were compared between individuals with and without supernumerary molar (M4. Results Possession of a supernumerary molar was associated with significantly larger M2/M1 score in Canis latrans, M3/M1 score in Nyctereutes procyonoides, and M2/M1 and M3/M1 scores in Urocyon cinereoargenteus compared to individuals of these species that lacked supernumerary molars. Discussion We propose that, in canids, the supernumerary fourth molar is attributable to reduced inhibition and greater activation during molar development. In the bat-eared fox, altered inhibition and activation dynamics of dental development during omnivorous-insectivorous adaptation may be a contributing factor in the origin of the lower fourth molar.

Antrolith in the Maxillary Sinus; Report of a Case

Directory of Open Access Journals (Sweden)

A. Haraji

2006-06-01

Full Text Available A case of maxillary antrolith in a 14-year-old girl is presented. A radiopaque mass,thought to be a supernumerary tooth, was incidentally found on a panoramic radiograph obtained for orthodontic purposes. During surgical exploration the maxillary sinus was penetrated and 6 calcified masses were discovered. Histopathologic analysis revealed a calcium deposition around a necrotic mass.

Accelerated tooth eruption in children with diabetes mellitus.

Science.gov (United States)

Lal, Shantanu; Cheng, Bin; Kaplan, Selma; Softness, Barney; Greenberg, Ellen; Goland, Robin S; Lalla, Evanthia; Lamster, Ira B

2008-05-01

The objective of this study was to evaluate tooth eruption in 6- to 14-year-old children with diabetes mellitus. Tooth eruption status was assessed for 270 children with diabetes and 320 control children without diabetes. Data on important diabetes-related variables were collected. Analyses were performed using logistic regression models. Children with diabetes exhibited accelerated tooth eruption in the late mixed dentition period (10-14 years of age) compared to healthy children. For both case patients and control subjects the odds of a tooth being in an advanced eruptive stage were significantly higher among girls than boys. There was also a trend associating gingival inflammation with expedited tooth eruption in both groups. No association was found between the odds of a tooth being in an advanced stage of eruption and hemoglobin A(1c) or duration of diabetes. Patients with higher body mass index percentile demonstrated statistically higher odds for accelerated tooth eruption, but the association was not clinically significant. Children with diabetes exhibit accelerated tooth eruption. Future studies need to ascertain the role of such aberrations in dental development and complications such as malocclusion, impaired oral hygiene, and periodontal disease. The standards of care for children with diabetes should include screening and referral programs aimed at oral health promotion and disease prevention.

Biologically Based Restorative Management of Tooth Wear

Directory of Open Access Journals (Sweden)

Martin G. D. Kelleher

2012-01-01

Full Text Available The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles.

Tooth loss prevalence among cardiac males and females

International Nuclear Information System (INIS)

Bokhari, S.A.H.; Khan, A.A.; Butt, A.K.

2007-01-01

Objective of study was to observe differences of tooth loss prevalence in males and females with Cardiac diseases Poor oral health, tooth loss and periodontal diseases have been reported to be associated with coronary heart diseases. Studies report gender differences in prevalence of cardiac diseases and tooth loss. This paper presents gender differences of tooth loss in cardiac patients of a cardiac hospital of Lahore, Pakistan. Methodology: Age matched Cardiac males and females attending OPD of the Punjab Institute of Cardiology (PIC), Lahore were included in the study. Personal and health-related information were questioned and noted. Oral examination was performed for recording of missing teeth. 1200 CHD study subjects with age-range of 30 to 80 years were enrolled for study. 1045 age matched, 766 (73.30%) males and 279 (26.70%) females were examined for tooth loss. 852 (81.53%) genders had at least one tooth missing. 599 (78.19) males and 253 (90.68%) females were observed with mean tooth loss of 7.5 (SD 8.720) and 11.15 (SD 10.375)respectively statistical association among them was also significant (P= 0.000) with OR of 2.339. More subjects (76.29%) showed a loss of 1-15 teeth that I was also significant among males and females. Tooth loss was significant in age groups of 41-50 years (P=0.001) and 51-60 years (P=0.000) Gender differences of tooth loss prevalence among CHD Subjects were significant with more risk for males as compared to females. (author)

Functional constraints on tooth morphology in carnivorous mammals

Directory of Open Access Journals (Sweden)

Smits Peter D

2012-08-01

Full Text Available Abstract Background The range of potential morphologies resulting from evolution is limited by complex interacting processes, ranging from development to function. Quantifying these interactions is important for understanding adaptation and convergent evolution. Using three-dimensional reconstructions of carnivoran and dasyuromorph tooth rows, we compared statistical models of the relationship between tooth row shape and the opposing tooth row, a static feature, as well as measures of mandibular motion during chewing (occlusion, which are kinetic features. This is a new approach to quantifying functional integration because we use measures of movement and displacement, such as the amount the mandible translates laterally during occlusion, as opposed to conventional morphological measures, such as mandible length and geometric landmarks. By sampling two distantly related groups of ecologically similar mammals, we study carnivorous mammals in general rather than a specific group of mammals. Results Statistical model comparisons demonstrate that the best performing models always include some measure of mandibular motion, indicating that functional and statistical models of tooth shape as purely a function of the opposing tooth row are too simple and that increased model complexity provides a better understanding of tooth form. The predictors of the best performing models always included the opposing tooth row shape and a relative linear measure of mandibular motion. Conclusions Our results provide quantitative support of long-standing hypotheses of tooth row shape as being influenced by mandibular motion in addition to the opposing tooth row. Additionally, this study illustrates the utility and necessity of including kinetic features in analyses of morphological integration.

Use of ultrasound Doppler to determine tooth vitality in a discolored tooth after traumatic injury: its prospects and limitations

Directory of Open Access Journals (Sweden)

Yong-Wook Cho

2014-02-01

Full Text Available When a tooth shows discoloration and does not respond to the cold test or electric pulp test (EPT after a traumatic injury, its diagnosis can be even more difficult due to the lack of proper diagnostic methods to evaluate its vitality. In these case reports, we hope to demonstrate that ultrasound Doppler might be successfully used to evaluate the vitality of the tooth after trauma, and help reduce unnecessary endodontic treatments. In all three of the present cases, the teeth were discolored after traumatic injuries and showed negative responses to the cold test and EPT. However, they showed distinctive vital reactions in the ultrasound Doppler test during the whole observation period. In the first case, the tooth color returned to normal, and the tooth showed a positive response to the cold test and EPT at 10 wk after the injury. In the second case, the tooth color had returned to its normal shade at 10 wk after the traumatic injury but remained insensitive to the cold test and EPT. In the third case, the discoloration was successfully treated with vital tooth bleaching.

Tooth Retained Implant: No More an Oxymoron

Directory of Open Access Journals (Sweden)

Divya Bhat

2011-03-01

Full Text Available Introduction: Periodontally af-fected teeth are treated in one of the two ways. (1 Tooth retention after periodontal surgery, in which the degree of regeneration achieved is unpredictable. (2 Tooth extrac-tion and implant placement. Implants have an osseointegrated surface which does not provide adequate shock absorption. Regeneration can be achieved by resecting the crown of the affected tooth and submerging the root. This technique has not had a clinical application so far as the tooth becomes difficult to restore. Placing an implant within the root can make the retained root restorable. At the same time, as the implant is placed within the root surface it achieves a periodontal integration which dampens occlusal forces better than osseointegration. Therefore, such a “tooth retained implant” may serve as an additional treatment option with significant benefits over tooth retention and implant placement alone. The hypothesis: Implants placed within retained roots have shown cementum deposition and attachment of periodontal ligament fibers over their surface. This periodontal attachment may be able to dam-pen forces better than in an osseointegrated implant. Moreover, since an implant is being placed, the crown of the tooth can be resected and submerged. This prevents epithelial migration, allows for the periodontal ligament cells to populate the wound and favors regeneration.Evaluation of the hypothesis: The technique of placing implants within cavities prepared in the root and then submerging them are simple for any practitioner placing implants routinely.

Autogenous Transplantation for Replacing a Hopeless Tooth.

Science.gov (United States)

Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

2017-01-01

Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption.

21 CFR 872.3580 - Preformed gold denture tooth.

Science.gov (United States)

2010-04-01

... tooth in a fixed or removable partial denture. (b) Classification. Class I (general controls). The... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a...

21 CFR 872.5525 - Preformed tooth positioner.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected bite...

Remineralising efficacy of tooth mousse plus (ACP CCPF) on radiated tooth

International Nuclear Information System (INIS)

Priya; Hegde, Mithra N.; Hegde, Nidarsh D.; Suchetha Kumari, N.; Sanjeev, Ganesh

2016-01-01

Dental complication is the common problem faced all over the world. Subjects with poor oral hygiene and patients undergoing radiotherapy for oral cancers are developing signs of decalcification of enamel, lesions and Caries. A well designed treatment is necessary to safeguard the tooth enamel surface before and after radiation, only then the caries on the enamel surface can be arrested by re-hardening it and ultimately converting them to the normal healthy condition. To determine the Annealing effect of radiated tooth by testing maximum micro hardness of the teeth before and after 30 days of radiation by the application of Remineralising agents. In our study, we collected 30 intact caries free human molar teeth and were sectioned mesio-distally

Computational model of exploding metallic fuses for multimegajoule switching

International Nuclear Information System (INIS)

Lindemuth, I.R.; Brownell, J.H.; Greene, A.E.; Nickel, G.H.; Oliphant, T.A.; Weiss, D.L.

1985-01-01

A new model for determining the time-dependent behavior of exploding metallic fuses is formulated. The model draws on an atomic data base and gives insight into the temporal behavior of the material density and temperature of the fuse as well as the nonlinear electrical circuit interaction. The model includes an embedding insulating tamper and leads to a plausible explanation of fuse ''restrike.'' The model predicts time-scale compression of 500 for inductive store systems powered by explosive driven magnetic flux compression generators. A scenario for achieving multimegajoule foil implosions is predicted

[Origin and morphological features of small supernumerary marker chromosomes in Turner syndrome].

Science.gov (United States)

Liu, Nan; Tong, Tong; Chen, Yue; Chen, Yanling; Cai, Chunquan

2018-02-10

OBJECTIVE To explore the origin and morphological features of small supernumerary marker chromosomes (sSMCs) in Turner syndrome. METHODS For 5 cases of Turner syndrome with a sSMC identified by conventional G-banding, dual-color fluorescence in situ hybridization (FISH) was applied to explore their origin and morphological features. RESULTS Among the 5 cases, 3 have derived from the X chromosome, which included 2 ring chromosomes and 1 centric minute. For the 2 sSMCs derived from the Y chromosome, 1 was ring or isodicentric chromosome, while the other was an isodicentric chromosome. CONCLUSION The sSMCs found in Turner syndrome have almost all derived from sex chromosomes. The majority of sSMCs derived from the X chromosome will form ring chromosomes, while a minority will form centric minute. While most sSMC derived from Y chromosome may exist as isodicentric chromosomes, and a small number may exist as rings. For Turner syndrome patients with sSMCs, dual-color FISH may be used to delineate their origins to facilitate genetic counseling and selection of clinical regime.

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies

OpenAIRE

Lara,Tulio Silva; Lancia,Melissa; Silva Filho,Omar Gabriel da; Garib,Daniela Gamba; Ozawa,Terumi Okada

2013-01-01

OBJECTIVE: To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. MATERIAL AND METHODS: Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender ; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment pl...

Parameters affecting tooth loss during periodontal maintenance in a Greek population.

Science.gov (United States)

Tsami, Alexandra; Pepelassi, Eudoxie; Kodovazenitis, George; Komboli, Mado

2009-09-01

Investigators have evaluated predictive parameters of tooth loss during the maintenance phase (MP). The authors conducted a retrospective study to evaluate the rate of tooth loss and to explore the parameters that affect tooth loss during MP in a Greek population. A periodontist administered periodontal treatment and maintenance care to 280 participants with severe periodontitis for a mean period +/- standard deviation of 10.84 +/- 2.13 years. The periodontist recorded the following parameters for each participant: oral hygiene index level, simplified gingival index level, clinical attachment level, probing depth measurements, initial tooth prognosis, smoking status, tooth loss during active periodontal treatment and MP, and compliance with suggested maintenance visits. The authors found that total tooth loss during active treatment (n = 1,427) was greater than during MP (n = 918) and was associated with the initial tooth prognosis, tooth type group, participants' compliance with suggested maintenance visits, smoking status and acceptability of the quality of tooth restorations. Most of the teeth extracted during maintenance had an initial guarded prognosis (n = 612). Participants whose compliance was erratic had a greater risk of undergoing tooth extraction than did participants whose compliance was complete. Participants' initial tooth prognosis, tooth type, compliance with suggested maintenance visits and smoking status affected tooth loss during MP. Initial guarded prognosis and erratic compliance increased the risk of undergoing tooth extraction during maintenance. Determining predictive parameters for disease progression and tooth loss provides critical information to clinicians so that they can develop and implement rational treatment planning.

Quantification of Residual Stress from Photonic Signatures of Fused Silica

Science.gov (United States)

Cramer, K. Elliott; Hayward, Maurice; Yost, William E.

2013-01-01

A commercially available grey-field polariscope (GFP) instrument for photoelastic examination is used to assess impact damage inflicted upon the outer-most pane of Space Shuttle windows made from fused silica. A method and apparatus for calibration of the stress-optic coefficient using four-point bending is discussed. The results are validated on known material (acrylic) and are found to agree with literature values to within 6%. The calibration procedure is then applied to fused-silica specimens and the stress-optic coefficient is determined to be 2.43 +/- 0.54 x 10(exp -12)/Pa. Fused silica specimens containing impacts artificially made at NASA's Hypervelocity Impact Technology Facility (HIT-F), to simulate damage typical during space flight, are examined. The damage sites are cored from fused silica window carcasses and examined with the GFP. The calibrated GFP measurements of residual stress patterns surrounding the damage sites are presented. Keywords: Glass, fused silica, photoelasticity, residual stress

Fiber fuse behavior in kW-level continuous-wave double-clad field laser

International Nuclear Information System (INIS)

Sun Jun-Yi; Xiao Qi-Rong; Li Dan; Wang Xue-Jiao; Zhang Hai-Tao; Gong Ma-Li; Yan Ping

2016-01-01

In this study, original experimental data for fiber fuse in kW-level continuous-wave (CW) high power double-clad fiber (DCF) laser are reported. The propagating velocity of the fuse is 9.68 m/s in a 3.1-kW Yb-doped DCF laser. Three other cases in Yb-doped DCF are also observed. We think that the ignition of fiber fuse is caused by thermal mechanism, and the formation of bullet-shaped tracks is attributed to the optical discharge and temperature gradient. The inducements of initial fuse and formation of bullet-shaped voids are analyzed. This investigation of fiber fuse helps better understand the fiber fuse behavior, in order to avoid the catastrophic destruction caused by fiber fuse in high power fiber laser. (paper)

Variables affecting orthodontic tooth movement with clear aligners.

Science.gov (United States)

Chisari, Justin R; McGorray, Susan P; Nair, Madhu; Wheeler, Timothy T

2014-04-01

In this study, we examined the impacts of age, sex, root length, bone levels, and bone quality on orthodontic tooth movement. Clear aligners were programmed to move 1 central incisor 1 mm over the course of 8 weeks. Thirty subjects, ages 19 to 64, were enrolled, and measurements were made on digital models (percentage of tooth movement goal achieved). Morphometric features and bone quality were assessed with cone-beam computed tomography. Data from this study were combined with data from 2 similar studies to increase the power for some analyses. The mean percentage of tooth movement goal achieved was 57% overall. Linear regression modeling indicated a cubic relationship between age and tooth movement, with a decreasing rate of movement from ages 18 to 35 years, a slightly increasing rate from ages 35 to 50, and a decreasing rate from ages 50 to 70. The final decreasing trend was not apparent for women. As would be expected, the correlation was significant between the percentage of the goal achieved and the cone-beam computed tomography superimposed linear measures of tooth movement. A significant negative correlation was found between tooth movement and the measurement apex to the center of rotation, but bone quality, as measured by fractal dimension, was not correlated with movement. The relationship between age and tooth movement is complex and might differ for male and female patients. Limited correlations with cone-beam computed tomography morphology and rate of tooth movement were detected. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Tooth resorption in cats: contribution of vitamin D and inflammation

NARCIS (Netherlands)

Vrieling, H.E.

2010-01-01

Tooth resorption in cats Tooth resorption affecting several teeth is a painful disease with a prevalence of up to 75% in household cats and is often accompanied by periodontitis. Tooth resorption is caused by an increased number and activity of tooth-resorbing odontoclasts, cells that share

Tooth fractures in canine clinical practice

International Nuclear Information System (INIS)

Capik, I.; Ledecky, V.; Sevcik, A.

2001-01-01

Tooth fractures constitute a considerable fraction of all tooth diseases. Out of the 5,370 dogs treated during four years, 492 were presented with dental problems and 28.3 % of the latter were treated for tooth fractures. Canines were the most frequently affected teeth (38.8 %), followed by premolars (33.1 %), incisors (25.9 %), and molars (2.2 %), 55.4 % of the patients with canine and incisor fractures being large breed dogs. Fractures of premolars (mostly of 108, 208) were divided evenly irrespective of breed or body size. Nonsurgical endodontic treatment yielded good therapeutic results in most cases, but repeated treatment was necessary in some patients

Fuse and application of said fuse to the construction of an emergency shutdown system for a nuclear reactor

International Nuclear Information System (INIS)

Taulier, H.H.L.; Brugeille, G.

1978-01-01

A fuse device for an automatic emergency shutdown system in fast reactors provides a coupling between a casing tube placed within a fuel can and a series of neutron-absorbing masses held together above the reactor core under normal operating conditions but released in free fall to the lower portion of the casing tube at the level of the reactor core as a result of melting of the fuse when operating characteristics such as temperature or neutron flux attain a level which exceeds a predetermined threshold

Fuse and application of said fuse to the construction of an emergency shutdown system for a nuclear reactor

International Nuclear Information System (INIS)

Taulier, H.H.L.; Brugeilles, G.

1976-01-01

A fuse device for an automatic emergency shutdown system in fast reactors provides a coupling between a casing tube placed within a fuel can and a series of neutron-absorbing masses held together above the reactor core under normal operating conditions. They are released in free fall to the lower portion of the casing tube at the level of the reactor core as a result of melting of the fuse when operating characteristics such as temperature or neutron flux attain a level which exceeds a predetermined threshold

and 8-Membered Oxygen-containing Benzo-fused Rings using ...

African Journals Online (AJOL)

NJD

A number of benzo-fused oxygen-containing heterocycles were synthesized from allyl-3-isopropoxy-4-methoxybenzaldehyde using metathesis or an alkene isomerization-metathesis sequence as key synthetic steps. Benzo-fused compounds thus formed included a 3,6-dihydro-1H-2-benzoxocine, ...

Outbursts In Symbiotic Binaries (FUSE 2000)

Science.gov (United States)

Kenyon, Scott J.; Sonneborn, George (Technical Monitor)

2002-01-01

During the past year, we made good progress on analysis of FUSE observations of the symbiotic binary Z And. For background, Z And is a binary system composed of a red giant and a hot component of unknown status. The orbital period is roughly 750 days. The hot component undergoes large-scale eruptions every 10-20 yr. An outburst began several years ago, triggering this FUSE opportunity. First, we obtained an excellent set of ground-based optical data in support, of the FUSE observations. We used FAST, a high throughput low resolution spectrograph on the 1.5-m telescope at Mt. Hopkins, Arizona. A 300 g/ mm grating blazed at 4750 A, a 3 in. slit, and a thinned Loral 512 x 2688 CCD gave us spectra covering 3800-7500 A at a resolution of 6 A. The wavelength solution for each spectrum has a probable error of +/- 0.5 A or better. Most of the resulting spectra have moderate signal-to-noise, S/.N approx. greater than 30 per pixel. The time coverage for these spectra is excellent. Typically, we acquired spectra every 1-2 nights during dark runs at Mt. Hopkins. These data cover most of the rise and all of the decline of the recent outburst. The spectra show a wealth of emission lines, including H I, He I, He II, [Fe V11], and the Raman scattering bands at 6830 A and 7088 A. The Raman bands and other high ionization features vary considerably throughout the outburst. These features will enable us to correlate variations in the FUSE spectra with variations in the optical spectra. Second, we began an analysis of FUSE spectra of Z And. We have carefully examined the spectra, identifying real features and defects. We have identified and measured fluxes for all strong emission lines, including the O VI doublet at 1032 A and 1038 A. These and several other strong emission lines display pronounced P Cygni absorption components indicative of outgrowing gas. We will attempt to correlate these velocities with similar profiles observed on optical spectra. The line velocities - together

Tooth cusp sharpness as a dietary correlate in great apes.

Science.gov (United States)

Berthaume, Michael A

2014-02-01

Mammalian molars have undergone heavy scrutiny to determine correlates between morphology and diet. Here, the relationship between one aspect of occlusal morphology, tooth cusp radius of curvature (RoC), and two broad dietary categories, folivory and frugivory, is analyzed in apes. The author hypothesizes that there is a relationship between tooth cusp RoC and diet, and that folivores have sharper teeth than frugivores, and further test the correlation between tooth cusp RoC and tooth cusp size. Eight measures of tooth cusp RoC (two RoCs per cusp) were taken from 53 M(2) s from four species and subspecies of frugivorous apes (Pongo pygmaeus, Pan troglodytes troglodytes, Pan troglodytes schweinfurthii, and Gorilla gorilla gorilla) and two subspecies of folivorous apes (Gorilla beringei beringei, and Gorilla beringei graueri). Phylogenetically corrected ANOVAs were run on the full dataset and several subsets of the full dataset, revealing that, when buccolingual RoCs are taken into account, tooth cusp RoCs can successfully differentiate folivores and frugivores. PCAs revealed that folivores consistently had duller teeth than frugivores. In addition, a weak, statistically significant positive correlation exists between tooth cusp size and tooth cusp RoC. The author hypothesizes differences in tooth cusp RoC are correlated with wear rates, where, per vertical unit of wear, duller cusps will have a longer length of exposed enamel ridge than sharper cusps. More data need to be gathered to determine if the correlation between tooth cusp RoC and tooth cusp size holds true when small primates are considered. Copyright © 2013 Wiley Periodicals, Inc.

ELIMINATING NEGETIVE EFFECT OF INVERTER-BASED DGs ON FUSE-RECLOSER COORDINATION IN DISTRIBUTION SYSTEMS

OpenAIRE

shakarami, mahmoudreza; namdari, farhad; salehi, moslem

2015-01-01

Despite many advantages of distributed generation (DG) sources, they may have a negative effect on the protection of distribution systems. In a distribution system, fuse-recloser protection scheme is designed such that the recloser could operate faster than the fuse to prevent fuse burning; but, the presence of DGs in fault conditions may lead to increased fuse current and thus faster performance of the fuse than the recloser and lack of coordination. In this paper, effect of DGs on fuse-recl...

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Dentist Your Family's Oral Health About the AGD Dental care and oral health information you need from ... Menstrual Calendar for Tooth Extraction Learn what those dental words mean. The Life of a Tooth Home | ...

Is gingival recession a consequence of an orthodontic tooth size and/or tooth position discrepancy? "A paradigm shift".

Science.gov (United States)

Richman, Colin

2011-01-01

Gingival recession (GR) is a commonly observed dental lesion. The underlying etiology has not been clearly identified, although several theories have been suggested. Tooth crowding or tooth malalignment is also frequently observed, with both conditions appearing to be more prevalent in developed countries with heterogeneous populations. A total of 25 consecutively treated patients representing 72 teeth and demonstrating facial clinical GR of > 3 mm were examined clinically, photographically, and with 3-dimensional radiology using conebeam computed tomography. All examined teeth presented with normal interproximal probing depths and attachment levels (teeth demonstrating > 3 mm of GR presented with significantly prominent facial tooth contours and associated alveolar bone dehiscences. Most involved teeth presented with their root structures extending beyond the facial alveolar bony housing (fenestrations). This represents a discrepancy between tooth size and alveolar bone dimensions in the buccolingual, axial, and sagittal orientation. Fewer involved teeth were malpositioned toward the buccal aspect. Both conditions were associated with facial alveolar bone dehiscences and associated GR. This study suggests tooth volume and/or tooth position within the alveolar bony housing strongly correlate with GR. All nonperiodontitis-involved teeth with GR were associated with either wider teeth or facially aligned teeth. However, it is emphasized that all facially aligned teeth, or "larger" teeth, do not necessarily present with GR. Based on these findings, the radiographic-supporting bone index is proposed. This index should facilitate appropriate evaluation of the alveolar bone supporting the mucogingival complex, both on the facial and lingual aspect of teeth. Further investigations are needed to support these preliminary data.

Gastroesophageal Reflux Disease and Tooth Erosion

Directory of Open Access Journals (Sweden)

Sarbin Ranjitkar

2012-01-01

Full Text Available The increasing prevalence of gastroesophageal reflux disease (GERD in children and adults, and of “silent refluxers” in particular, increases the responsibility of dentists to be alert to this potentially severe condition when observing unexplained instances of tooth erosion. Although gastroesophageal reflux is a normal physiologic occurrence, excessive gastric and duodenal regurgitation combined with a decrease in normal protective mechanisms, including an adequate production of saliva, may result in many esophageal and extraesophageal adverse conditions. Sleep-related GERD is particularly insidious as the supine position enhances the proximal migration of gastric contents, and normal saliva production is much reduced. Gastric acid will displace saliva easily from tooth surfaces, and proteolytic pepsin will remove protective dental pellicle. Though increasing evidence of associations between GERD and tooth erosion has been shown in both animal and human studies, relatively few clinical studies have been carried out under controlled trial conditions. Suspicion of an endogenous source of acid being associated with observed tooth erosion requires medical referral and management of the patient as the primary method for its prevention and control.

Tooth positioners and their effects on treatment outcome.

Science.gov (United States)

Pravindevaprasad, A; Therese, Beena Agnes

2013-07-01

Malocclusion can also be corrected by means of clear removable appliances called as "tooth positioners" or "aligners". A tooth positioner is used to control settling and to minimize or eliminate relapse of the teeth after an orthodontic treatment. In this article, a complete review of the objectives, course of treatment, fabrication, and the materials used for fabrication of tooth positioners along with their importance and disadvantages were discussed. Tooth positioners did improve the overall orthodontic treatment outcome as quantified by the ABO (American Board of orthodontics) objective scoring method. But once the initial occlusal contact was achieved, the vertical movement of teeth was found to be inhibited.

Fusing Facial Features for Face Recognition

Directory of Open Access Journals (Sweden)

Jamal Ahmad Dargham

2012-06-01

Full Text Available Face recognition is an important biometric method because of its potential applications in many fields, such as access control, surveillance, and human-computer interaction. In this paper, a face recognition system that fuses the outputs of three face recognition systems based on Gabor jets is presented. The first system uses the magnitude, the second uses the phase, and the third uses the phase-weighted magnitude of the jets. The jets are generated from facial landmarks selected using three selection methods. It was found out that fusing the facial features gives better recognition rate than either facial feature used individually regardless of the landmark selection method.

Tooth-marked small theropod bone: an extremely rare trace

DEFF Research Database (Denmark)

Jacobsen, Aase Roland

2001-01-01

Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

Association between Severity of Tooth Wear and Dentinal Hypersensitivity

Directory of Open Access Journals (Sweden)

Ashok Ayer

2016-11-01

Full Text Available Background & Objectives: Tooth wear (attrition, abrasion, erosion, and abfraction is perceived globally as ever increasing problem. Several outcome of the tooth wear are hypersensitivity, esthetic problems, functional impairment, annoyance to the patient, and fracture of the tooth. Among these, the measurable and more commonly reported outcome is hypersensitivity to stimuli. Although dentin hypersensitivity is a common clinical condition and is generally reported by the patient after experiencing a sharp, short pain caused by one of the several different external stimuli, it is often inadequately understood. None of the scientific literature available till date attempted to establish the relationship between tooth wear and dentin hypersensitivity which could be a key factor in monitoring those patients.  The aim of the study was to estimate the association between severity of teeth wear and sensitivity in the patients with reported dentinal hypersensitivity.Materials & Methods: Fifty patients with dentin hypersensitivity were investigated for tooth wear. Tooth wear measured using exact tooth wear index and level of sensitivity to stimuli was recorded using a numerical rating scale. Results: Enamel wear at cervical region of teeth showed a positive correlation (p=.010, similarly, dentin wear at cervical region of teeth showed positive correlation and significant association (p<.001 with dentinal hypersensitivity.Conclusion: The observation supports a significant association between severities of tooth surface wear and dentinal hypersensitivity.

Orientation and deformation of mineral crystals in tooth surfaces.

Science.gov (United States)

Fujisaki, Kazuhiro; Todoh, Masahiro; Niida, Atsushi; Shibuya, Ryota; Kitami, Shunsuke; Tadano, Shigeru

2012-06-01

Tooth enamel is the hardest material in the human body, and it is mainly composed of hydroxyapatite (HAp)-like mineral particles. As HAp has a hexagonal crystal structure, X-ray diffraction methods can be used to analyze the crystal structure of HAp in teeth. Here, the X-ray diffraction method was applied to the surface of tooth enamel to measure the orientation and strain of the HAp crystals. The c-axis of the hexagonal crystal structure of HAp was oriented to the surface perpendicular to the tooth enamel covering the tooth surface. Thus, the strain of HAp at the surface of teeth was measured by X-ray diffraction from the (004) lattice planes aligned along the c-axis. The X-ray strain measurements were conducted on tooth specimens with intact surfaces under loading. Highly accurate strain measurements of the surface of tooth specimens were performed by precise positioning of the X-ray irradiation area during loading. The strains of the (004) lattice plane were measured at several positions on the surface of the specimens under compression along the tooth axis. The strains were obtained as tensile strains at the labial side of incisor tooth specimens. In posterior teeth, the strains were different at different measurement positions, varying from tensile to compressive types. Copyright © 2012 Elsevier Ltd. All rights reserved.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Child First See a Dentist? The History of Dental Advances Why is Oral Health Important for Men? What is Baby Bottle Tooth Decay? Learn what those dental words mean. The Life of a Tooth Home | ...

Inhibitory effect of interferon-γ on experimental tooth movement in mice.

Science.gov (United States)

Kohara, Haruka; Kitaura, Hideki; Yoshimatsu, Masako; Fujimura, Yuji; Morita, Yukiko; Eguchi, Toshiko; Yoshida, Noriaki

2012-09-01

The aim of this study was to investigate the effects of interferon (IFN)-γ on experimental tooth movement in mice using a murine experimental tooth movement model. An Ni-Ti closed-coil spring was inserted between the upper-anterior alveolar bones and the upper-left first molars in mice. We evaluated the relationship between local Ifn-γ mRNA levels and orthodontic tooth movement. In other experiments, IFN-γ was injected adjacent to each first molar every other day during tooth movement. After 12 days, the amount of tooth movement was measured. Tartrate-resistant acid phosphatase (TRAP)-positive cells at the pressure side of each experimental tooth were counted as osteoclasts. Local Ifn-γ mRNA expression increased with orthodontic tooth movement. The number of TRAP-positive cells increased on the pressure side of the first molar. In contrast, the degree of tooth movement and the number of TRAP-positive cells on the pressure side in IFN-γ-injected mice were less than those of control mice. IFN-γ was induced in experimental tooth movement, and could inhibit mechanical force-loaded osteoclastogenesis and tooth movement. These results suggest that IFN-γ might be useful in controlling orthodontic tooth movement because of its inhibitory action on excessive osteoclastogenesis during this movement.

Tooth bleaching and young adults in Nigeria: knowledge, experiences and intention.

Science.gov (United States)

Azodo, C C; Ogbomo, A C; Agbor, M A

2012-12-01

To assess the knowledge, experiences and intention to have tooth bleaching among young adults studying in a Nigerian University. A cross-section of part-time undergraduate students of University of Benin, Benin City, Nigeria were studied in 2010 using a self-administered questionnaire. About three-quarters 289 (72.4%) of the respondents reported awareness of at least one cause of tooth discoloration. A total of 143 (35.8%) of the respondents have heard of tooth bleaching with main sources of information being friends/relatives, dentists and the internet. One-third 132 (33.1%) of the respondents correctly identified that the aim of tooth bleaching was to make the teeth whiter. The respondents that had correct knowledge about mechanism, duration and complications of tooth bleaching were 51 (12.8%), 25 (6.3%) and 35 (8.8%) respectively. The major perceived benefits of tooth bleaching reported by the respondents were self confidence boost 152 (38.1%) and improvement of one's beauty 107 (26.8%). Out of the 68 (17.0%) respondents that have attempted tooth bleaching, 36 (52.9%) used tooth whitening toothpaste. Out of the 151 (37.8%) respondents that expressed intention of having tooth bleaching procedure, 32 (21.2%) would pursue the course, no matter the cost. In the studied population, knowledge of tooth discoloration was high, awareness and experiences of tooth bleaching were low but significant number expressed intention of having tooth bleaching. It is important that dentists increase oral health information particularly tooth bleaching information accessibility to the young adult population to improve the knowledge and prevent adverse effects.

Tooth Decay Process: How to Reverse It and Avoid a Cavity

Science.gov (United States)

... Health Info Health Topics Tooth Decay Tooth decay (dental caries) is damage to a tooth that can happen ... Clinical Trials Show All Clinical Trials Data & Statistics Dental caries (tooth decay) remains the most prevalent chronic disease ...

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Cracked tooth syndrome: A report of three cases.

Science.gov (United States)

Sadasiva, Kadandale; Ramalingam, Sathishmuthukumar; Rajaram, Krishnaraj; Meiyappan, Alagappan

2015-08-01

Cracked tooth syndrome (CTS), the term was coined by Cameron in 1964, which refers to an incomplete fracture of a vital posterior tooth extending to the dentin and occasionally into the pulp. CTS has always been a nightmare to the patient because of its unpredictable symptoms and a diagnostic dilemma for the dental practitioner due to its variable, bizarre clinical presentation. The treatment planning and management of CTS has also given problems and challenges the dentist as there is no specific treatment option. The management of CTS varies from one case to another or from one tooth to another in the same individual based on the severity of the symptoms and depth of tooth structure involved. After all, the prognosis of such tooth is still questionable and requires continuous evaluation. This article aims at presenting a series three cases of CTS with an overview on the clinical presentation, diagnosis and the different treatment options that varies from one case to another.

Hole-assisted fiber based fiber fuse terminator supporting 22 W input

Science.gov (United States)

Tsujikawa, Kyozo; Kurokawa, Kenji; Hanzawa, Nobutomo; Nozoe, Saki; Matsui, Takashi; Nakajima, Kazuhide

2018-05-01

We investigated the air hole structure in hole-assisted fiber (HAF) with the aim of terminating fiber fuse propagation. We focused on two structural parameters c/MFD and S1/S2, which are related respectively to the position and area of the air holes, and mapped their appropriate values for terminating fiber fuse propagation. Here, MFD is the mode field diameter, c is the diameter of an inscribed circle linking the air holes, S1 is the total area of the air holes, and S2 is the area of a circumscribed circle linking the air holes. On the basis of these results, we successfully realized a compact fiber fuse terminator consisting of a 1.35 mm-long HAF, which can terminate fiber fuse propagation even with a 22 W input. In addition, we observed fiber fuse termination using a high-speed camera. We additionally confirmed that the HAF-based fiber fuse terminator is effective under various input power conditions. The penetration length of the optical discharge in the HAF was only less than 300 μm when the input power was from 2 to 22 W.

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur.

Science.gov (United States)

Liu, Min; Reed, David A; Cecchini, Giancarlo M; Lu, Xuanyu; Ganjawalla, Karan; Gonzales, Carol S; Monahan, Richard; Luan, Xianghong; Diekwisch, Thomas G H

2016-01-01

Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here, we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids vs. snakes: (i) the orientation of replacement teeth compared to the major tooth axis, (ii) the occurrence of resorption pits, and (iii) the mode of tooth implantation/attachment to the tooth bearing element (TBE). The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as Heloderma. In

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur

Directory of Open Access Journals (Sweden)

Min eLiu

2016-05-01

Full Text Available Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids versus snakes: (i the orientation of replacement teeth compared to the major tooth axis, (ii the occurrence of resorption pits, and (iii the mode of tooth implantation/attachment to the tooth bearing element. The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as

[Effects of laser welding on bond of porcelain fused cast pure titanium].

Science.gov (United States)

Zhu, Juan-fang; He, Hui-ming; Gao, Bo; Wang, Zhong-yi

2006-04-01

To investigate the influence of the laser welding on bond of porcelain fused to cast pure titanium. Twenty cast titanium plates were divided into two groups: laser welded group and control group. The low-fusing porcelain was fused to the laser welded cast pure titanium plates at fusion zone. The bond strength of the porcelain to laser welded cast pure titanium was measured by the three-point bending test. The interface of titanium and porcelain was investigated by scanning electron microscopy (SEM) and energy depressive X-ray detector (EDX). The non-welded titanium plates were used as comparison. No significant difference of the bond strength was found between laser-welded samples [(46.85 +/- 0.76) MPa] and the controls [(41.71 +/- 0.55) MPa] (P > 0.05). The SEM displayed the interface presented similar irregularities with a predominance. The titanium diffused to low-fusing porcelain, while silicon and aluminum diffused to titanium basement. Laser welding does not affect low-fusing porcelain fused to pure titanium.

Factors associated with tooth loss and prosthodontic status among Sudanese adults.

Science.gov (United States)

Khalifa, Nadia; Allen, Patrick F; Abu-bakr, Neamat H; Abdel-Rahman, Manar E

2012-01-01

A study was conducted to determine the degree of tooth loss, factors influencing tooth loss, and the extent of prosthodontic rehabilitation in Sudanese adults (≥ 16 years old) attending outpatient clinics in Khartoum State. Pearson and multivariate analyses were used to examine the relationships between tooth loss and specific characteristics determined through interviews and clinical examinations. The mean number of missing teeth was 3.6 (SD, 4.9) and the prevalence of edentulism was 0.1%. The prevalence of tooth loss (missing at least one tooth) was 78%; 66.9% of tooth loss was due to caries, and 11.2% was attributable to other reasons. Prosthetic replacement of missing teeth was evident in 3%, whereas a need for prosthetic replacement was evident in 57%. Having teeth was associated with age, gender, and socioeconomic status; tooth loss due to caries was associated with age, tribe, frequency of tooth-brushing, and a low rate of dental consultation. Tooth loss due to other reasons was associated with age, tribe, education, periodontal pocketing, tobacco use, tooth wear, and prosthetic status. The results of the present study indicated that the major cause of tooth loss was dental caries, thus emphasizing the importance of a public prevention-based healthcare program. Replacement of missing teeth was uncommon in the study subjects, which may reflect lack of access to this type of oral healthcare.

Contaminated tooth brushes-potential threat to oral and general health

Directory of Open Access Journals (Sweden)

Rashmi Naik

2015-01-01

Full Text Available Background: Tooth brushing is most common method of maintaining oral hygiene. In removing plaque and other soft debris from the teeth, tooth brushes become contaminated with bacteria, blood, saliva and oral debris. These contaminated tooth brushes can be a source of infection. Aims and objectives: The aim of the present study was to evaluate the presence of microorganisms in the tooth brushes and to investigate the effect of disinfectants such as chlorhexidine gluconate, sodium hypochlorite and water to decontaminate them. Materials and Methods: Twenty-one children were asked to brush their teeth for 5 days with a tooth brush. The tooth brushes were put in Robertson′s Cooked Meat broth and were observed for growth of Streptococcal microorganisms. These tooth brushes were then placed in disinfectants such as 0.2% chlorhexidine gluconate (Group I, 1% sodium hypochlorite (Group II and water (Group III for 24 hrs and then cultured again. Reduction of growth of microorganisms was seen in Group I, Group II and remnants of growth seen in Group III. Conclusion: We conclude that the use of disinfectant for a tooth brush is a must for every individual at least at regular intervals.

Renal cell carcinoma in patient with crossed fused renal ectopia

Directory of Open Access Journals (Sweden)

Ozgur Cakmak

2016-01-01

Full Text Available Primary renal cell carcinomas have rarely been reported in patients with crossed fused renal ectopia. We presented a patient with right to left crossed fused kidney harbouring renal tumor. The most frequent tumor encountered in crossed fused renal ectopia is renal cell carcinoma. In this case, partial nephrectomy was performed which pave way to preservation of the uninvolved both renal units. Due to unpredictable anatomy, careful preoperative planning and meticulous delineation of renal vasculature is essential for preservation of the uninvolved renal units.

Tooth development in Ambystoma mexicanum: phosphatase activities, calcium accumulation and cell proliferation in the tooth-forming tissues.

Science.gov (United States)

Wistuba, Joachim; Ehmcke, Jens; Clemen, Günter

2003-06-01

Prerequisites of tooth formation, cell proliferation in the tooth-forming tissues, calcium accumulation and the enzymatic activities of alkaline (ALP) and acid phosphatases (ACP) were investigated by immunohistochemical and histochemical methods in various developmental stages of the Mexican Axolotl, Ambystoma mexicanum. During the growth of replacement teeth, the tooth-forming tissues continually recruit cells from the surrounding regions. The basal layer of the oral epithelium, the dental lamina and sometimes even the outer enamel epithelium provide cells for the differentiated inner enamel epithelium, in which the active ameloblasts are localized. The differentiating odontoblasts are derived from proliferating cells situated basally to the replacement teeth in the mesenchymal tissue. When differentiation has started and the cells have become functional, proliferative activity can no longer be observed. Calcium is accumulated close to the site of mineralization in the inner enamel epithelium and in the odontoblasts as it is in mammals, elasmobranchii and teleostei. The activities of ACP and ALP related to the mineralization of the replacement teeth are separated spatially and not sequentially as they are in mammals. However, the results indicate a similar function of these enzymatic components in relation to tooth formation and maturation of mineral deposition. Most of the substantial processes related to tooth formation reported from other vertebrates occur in a manner similar to that in Ambystoma mexicanum, but there also seem to be basic mechanisms present that are realised in a unique way in this urodele.

Effect of Melamine Sponge on Tooth Stain Removal.

Science.gov (United States)

Otsuka, Takero; Kawata, Toshitsugu

2015-01-01

To investigate the stain removal ability of melamine sponge before aesthetic tooth whitening in extracted teeth. Melamine sponge of thickness 40 mm was compressed and the destruction of the partition wall structure during the compression process was examined under a stereoscopic microscope. An extracted human tooth was cleaned by normal polishing or with melamine sponge for 90 s. To evaluate the stain level, the tooth surfaces were photographed under a stereoscopic microscope at 0, 30, 60 and 90 s. The residual stained region was traced in a high-magnification photograph, and the stain intensity was presented as a change, relative to the intensity before the experiment (0 s). Mechanical cleaning by toothbrushing produced polishing scratches on the tooth surface, whereas use of the melamine sponge resulted in only minimal scratches. As the compression level increased, the stain-removing effect tended to become stronger. Melamine sponge can remove stains from the tooth surface more effectively and less invasively compared to a conventional toothbrush. As no new scratches are made on the tooth surface when using a melamine sponge brush, the risk of re-staining is reduced. Cleaning using a melamine sponge brush can be easily and effectively performed at home and in a dental office.

An automatic tooth preparation technique: A preliminary study

Science.gov (United States)

Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

2016-04-01

The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

Periodontal profile classes predict periodontal disease progression and tooth loss.

Science.gov (United States)

Morelli, Thiago; Moss, Kevin L; Preisser, John S; Beck, James D; Divaris, Kimon; Wu, Di; Offenbacher, Steven

2018-02-01

Current periodontal disease taxonomies have limited utility for predicting disease progression and tooth loss; in fact, tooth loss itself can undermine precise person-level periodontal disease classifications. To overcome this limitation, the current group recently introduced a novel patient stratification system using latent class analyses of clinical parameters, including patterns of missing teeth. This investigation sought to determine the clinical utility of the Periodontal Profile Classes and Tooth Profile Classes (PPC/TPC) taxonomy for risk assessment, specifically for predicting periodontal disease progression and incident tooth loss. The analytic sample comprised 4,682 adult participants of two prospective cohort studies (Dental Atherosclerosis Risk in Communities Study and Piedmont Dental Study) with information on periodontal disease progression and incident tooth loss. The PPC/TPC taxonomy includes seven distinct PPCs (person-level disease pattern and severity) and seven TPCs (tooth-level disease). Logistic regression modeling was used to estimate relative risks (RR) and 95% confidence intervals (CI) for the association of these latent classes with disease progression and incident tooth loss, adjusting for examination center, race, sex, age, diabetes, and smoking. To obtain personalized outcome propensities, risk estimates associated with each participant's PPC and TPC were combined into person-level composite risk scores (Index of Periodontal Risk [IPR]). Individuals in two PPCs (PPC-G: Severe Disease and PPC-D: Tooth Loss) had the highest tooth loss risk (RR = 3.6; 95% CI = 2.6 to 5.0 and RR = 3.8; 95% CI = 2.9 to 5.1, respectively). PPC-G also had the highest risk for periodontitis progression (RR = 5.7; 95% CI = 2.2 to 14.7). Personalized IPR scores were positively associated with both periodontitis progression and tooth loss. These findings, upon additional validation, suggest that the periodontal/tooth profile classes and the derived

Reliability of horizontal and vertical tube shift techniques in the localisation of supernumerary teeth.

Science.gov (United States)

Mallineni, S K; Anthonappa, R P; King, N M

2016-12-01

To assess the reliability of the vertical tube shift technique (VTST) and horizontal tube shift technique (HTST) for the localisation of unerupted supernumerary teeth (ST) in the anterior region of the maxilla. A convenience sample of 83 patients who attended a major teaching hospital because of unerupted ST was selected. Only non-syndromic patients with ST and who had complete clinical and radiographic and surgical records were included in the study. Ten examiners independently rated the paired set of radiographs for each technique. Chi-square test, paired t test and kappa statistics were employed to assess the intra- and inter-examiner reliability. Paired sets of 1660 radiographs (830 pairs for each technique) were available for the analysis. The overall sensitivity for VTST and HTST was 80.6 and 72.1% respectively, with slight inter-examiner and good intra-examiner reliability. Statistically significant differences were evident between the two localisation techniques (p HTST in the anterior region of the maxilla.

Safety issues of tooth whitening using peroxide-based materials.

Science.gov (United States)

Li, Y; Greenwall, L

2013-07-01

In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

The origin of the supernumerary subunits and assembly factors of complex I: A treasure trove of pathway evolution.

Science.gov (United States)

Elurbe, Dei M; Huynen, Martijn A

2016-07-01

We review and document the evolutionary origin of all complex I assembly factors and nine supernumerary subunits from protein families. Based on experimental data and the conservation of critical residues we identify a spectrum of protein function conservation between the complex I representatives and their non-complex I homologs. This spectrum ranges from proteins that have retained their molecular function but in which the substrate specificity may have changed or have become more specific, like NDUFAF5, to proteins that have lost their original molecular function and critical catalytic residues like NDUFAF6. In between are proteins that have retained their molecular function, which however appears unrelated to complex I, like ACAD9, or proteins in which amino acids of the active site are conserved but for which no enzymatic activity has been reported, like NDUFA10. We interpret complex I evolution against the background of molecular evolution theory. Complex I supernumerary subunits and assembly factors appear to have been recruited from proteins that are mitochondrial and/or that are expressed when complex I is active. Within the evolution of complex I and its assembly there are many cases of neofunctionalization after gene duplication, like ACAD9 and TMEM126B, one case of subfunctionalization: ACPM1 and ACPM2 in Yarrowia lipolytica, and one case in which a complex I protein itself appears to have been the source of a new protein from another complex: NDUFS6 gave rise to cytochrome c oxidase subunit COX4/COX5b. Complex I and its assembly can therewith be regarded as a treasure trove for pathway evolution. This article is part of a Special Issue entitled Respiratory complex I, edited by Volker Zickermann and Ulrich Brandt. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of light energy on peroxide tooth bleaching.

Science.gov (United States)

Luk, Karen; Tam, Laura; Hubert, Manfred

2004-02-01

Light-activated bleaching is a method of tooth whitening. The authors conducted a study to compare the whitening effects and tooth temperature changes induced by various combinations of peroxide bleaches and light sources. The authors randomly assigned 250 extracted human teeth halves into experimental groups (n = 10). A placebo gel (control), a 35 percent hydrogen peroxide or a 10 percent carbamide peroxide bleach was placed on the tooth surface and was irradiated with no light (control); a halogen curing light; an infrared, or IR, light; an argon laser; or a carbon dioxide, or CO2, laser. Color changes were evaluated immediately, one day and one week after treatment using a value-oriented shade guide and an electronic dental color analyzer. The outer enamel and inner dentin surface temperatures were monitored before and immediately after each 30-second application of light using a thermocouple thermometer. Color and temperature changes were significantly affected by an interaction of the bleach and light variables. The application of lights significantly improved the whitening efficacy of some bleach materials, but it caused significant temperature increases in the outer and inner tooth surfaces. The IR and CO2 laser lights caused the highest tooth temperature increases. Dentists performing an in-office bleaching technique with the use of an additional light source to accelerate tooth whitening should consider the specific bleaching agent being used, as well as the potential risks of heating teeth. A specific combination of bleach and light that demonstrates good color change and little temperature rise should be selected for in-office tooth bleaching.

Advances and perspectives in tooth tissue engineering.

Science.gov (United States)

Monteiro, Nelson; Yelick, Pamela C

2017-09-01

Bio-engineered teeth that can grow and remodel in a manner similar to that of natural teeth have the potential to serve as permanent replacements to the currently used prosthetic teeth, such as dental implants. A major challenge in designing functional bio-engineered teeth is to mimic both the structural and anisotropic mechanical characteristics of the native tooth. Therefore, the field of dental and whole tooth regeneration has advanced towards the molecular and nanoscale design of bio-active, biomimetic systems, using biomaterials, drug delivery systems and stem cells. The focus of this review is to discuss recent advances in tooth tissue engineering, using biomimetic scaffolds that provide proper architectural cues, exhibit the capacity to support dental stem cell proliferation and differentiation and sequester and release bio-active agents, such as growth factors and nucleic acids, in a spatiotemporal controlled manner. Although many in vitro and in vivo studies on tooth regeneration appear promising, before tooth tissue engineering becomes a reality for humans, additional research is needed to perfect methods that use adult human dental stem cells, as opposed to embryonic dental stem cells, and to devise the means to generate bio-engineered teeth of predetermined size and shape. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

RR Tel: Getting Under the Flux Limit: An Observation with FUSE

Science.gov (United States)

Sonnenborn, George (Technical Monitor); Kenyon, Scott J.

2004-01-01

The goal of this program is to acquire a FUSE spectrum of the symbiotic binary RR Tel. With these data, we plan to derive improved constraints on the hot component, the nebula, and perhaps the red giant wind. Based on results from AG Dra, we should also be able to use some line detections to improve atomic parameters for high ionization emission lines. This results would benefit the general FUSE community. As of this writing, the FUSE observation of RR Tel has not been made. Because RR Tel is a very bright UV source, the FUSE team is assessing the likelihood that RR Tel will have an adverse affect on the instrument.

Common dental anomalies in cleft lip and palate patients.

Science.gov (United States)

Haque, Sanjida; Alam, Mohammad Khursheed

2015-01-01

Cleft lip and palate (CLP) is the most common orofacial congenital malformation in live births. CLP can occur individually or in combination with other congenital deformities. Affected patients experience a number of dental, aesthetic, speech, hearing, and psychological complications and have a higher incidence of severe dental conditions. The purpose of this study is to characterise the different types of dental anomalies that are frequently associated with CLP patients based on a literature survey. By literature survey, this study characterises the different types of dental anomalies that are frequently associated with cleft lip and palate patients. Common dental anomalies associated with CLP are supernumerary tooth, congenitally missing tooth, delayed tooth development, morphological anomalies in both deciduous and permanent dentition, delayed eruption of permanent maxillary incisors, microdontia, and abnormal tooth number. The incidence of certain dental anomalies is strongly correlated with Cleft lip and palate, a finding that is consistent with previous studies.

Beyond the big five: the Dark Triad and the supernumerary personality inventory.

Science.gov (United States)

Veselka, Livia; Schermer, Julie Aitken; Vernon, Philip A

2011-04-01

The Dark Triad of personality, comprising Machiavellianism, narcissism, and psychopathy, was investigated in relation to the Supernumerary Personality Inventory (SPI) traits, because both sets of variables are predominantly distinct from the Big Five model of personality. Correlational and principal factor analyses were conducted to assess the relations between the Dark Triad and SPI traits. Multivariate behavioral genetic model-fitting analyses were also conducted to determine the correlated genetic and/or environmental underpinnings of the observed phenotypic correlations. Participants were 358 monozygotic and 98 same-sex dizygotic adult twin pairs from North America. As predicted, results revealed significant correlations between the Dark Triad and most SPI traits, and these correlations were primarily attributable to common genetic and non-shared environmental factors, except in the case of Machiavellianism, where shared environmental effects emerged. Three correlated factors were extracted during joint factor analysis of the Dark Triad and SPI traits, as well as a heritable general factor of personality - results that clarified the structure of the Dark Triad construct. It is concluded that the Dark Triad represents an exploitative and antisocial construct that extends beyond the Big Five model and shares a theoretical space with the SPI traits.

HVI Ballistic Limit Characterization of Fused Silica Thermal Panes

Science.gov (United States)

Miller, J. E.; Bohl, W. D.; Christiansen, E. L.; Davis, B. A.; Deighton, K. D.

2015-01-01

Fused silica window systems are used heavily on crewed reentry vehicles, and they are currently being used on the next generation of US crewed spacecraft, Orion. These systems improve crew situational awareness and comfort, as well as, insulating the reentry critical components of a spacecraft against the intense thermal environments of atmospheric reentry. Additionally, these materials are highly exposed to space environment hazards like solid particle impacts. This paper discusses impact studies up to 10 km/s on a fused silica window system proposed for the Orion spacecraft. A ballistic limit equation that describes the threshold of perforation of a fuse silica pane over a broad range of impact velocities, obliquities and projectile materials is discussed here.

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Innovative Design and Performance Evaluation of Bionic Imprinting Toothed Wheel.

Science.gov (United States)

Zhang, Zhihong; Wang, Xiaoyang; Tong, Jin; Stephen, Carr

2018-01-01

A highly efficient soil-burrowing dung beetle possesses an intricate outer contour curve on its foreleg end-tooth. This study was carried out based on evidence that this special outer contour curve has the potential of reducing soil penetration resistance and could enhance soil-burrowing efficiency. A toothed wheel is a typical agricultural implement for soil imprinting, to increase its working efficiency; the approach of the bionic geometrical structure was utilized to optimize the innovative shape of imprinting toothed wheel. Characteristics in the dung beetle's foreleg end-tooth were extracted and studied by the edge detection technique. Then, this special outer contour curve was modeled by a nine-order polynomial function and used for the innovative design of imprinting the tooth's cutting edge. Both the conventional and bionic teeth were manufactured, and traction tests in a soil bin were conducted. Taking required draft force and volume of imprinted microbasin as the evaluating indexes, operating efficiency and quality of different toothed wheels were compared and investigated. Results indicate that compared with the conventional toothed wheel, a bionic toothed wheel possesses a better forward resistance reduction property against soil and, meanwhile, can enhance the quality of soil imprinting by increasing the volume of the created micro-basin.

Tooth brushing among 11- to 15-year-olds in Denmark

DEFF Research Database (Denmark)

Bast, L. S.; Holstein, B. E.; Nordahl, Helene

2015-01-01

brushing. Results: 10,607 respondents: a response rate of 88.3%. Boys of lower social class had higher odds ratio (OR) of infrequent tooth brushing than girls: 1.98 (95% confidence interval 1.62-2.41) vs 1.80 (1.53-2.24). Immigrants and descendants had higher odds compared to adolescents of Danish origin......Objective: Regular tooth brushing in adolescence predicts stable tooth brushing habits later in life. Differences in tooth brushing habits by ethnic background and socioeconomic position have been suggested. We investigated migration status and social class in relation to infrequent tooth brushing...... both separately and combined. Methods: The study population was 11-15 year-olds chosen from a clustered random sample of schools. Univariate and multivariate logistic regression analyses estimated the separate and combined effects of migration status and social class on less than twice daily tooth...

Liquefier Dynamics in Fused Deposition

DEFF Research Database (Denmark)

Bellini, Anna; Guceri, Selcuk; Bertoldi, Maurizio

2004-01-01

Layered manufacturing (LM) is an evolution of rapid prototyping (RP) technology whereby a part is built in layers. Fused deposition modeling (FDM) is a particular LM technique in which each section is fabricated through vector style deposition of building blocks, called roads, which...

Stem cells for tooth engineering

Directory of Open Access Journals (Sweden)

G Bluteau

2008-07-01

Full Text Available Tooth development results from sequential and reciprocal interactions between the oral epithelium and the underlying neural crest-derived mesenchyme. The generation of dental structures and/or entire teeth in the laboratory depends upon the manipulation of stem cells and requires a synergy of all cellular and molecular events that finally lead to the formation of tooth-specific hard tissues, dentin and enamel. Although mesenchymal stem cells from different origins have been extensively studied in their capacity to form dentin in vitro, information is not yet available concerning the use of epithelial stem cells. The odontogenic potential resides in the oral epithelium and thus epithelial stem cells are necessary for both the initiation of tooth formation and enamel matrix production. This review focuses on the different sources of stem cells that have been used for making teeth in vitro and their relative efficiency. Embryonic, post-natal or even adult stem cells were assessed and proved to possess an enormous regenerative potential, but their application in dental practice is still problematic and limited due to various parameters that are not yet under control such as the high risk of rejection, cell behaviour, long tooth eruption period, appropriate crown morphology and suitable colour. Nevertheless, the development of biological approaches for dental reconstruction using stem cells is promising and remains one of the greatest challenges in the dental field for the years to come.

Tooth color: effects on judgments of attractiveness and age.

Science.gov (United States)

Grosofsky, Alexis; Adkins, Sarah; Bastholm, Robert; Meyer, Leif; Krueger, Lisa; Meyer, Joshua; Torma, Peter

2003-02-01

Tooth whitening has become a very popular procedure. Advertisements for whitening products imply that whiter teeth are more attractive than yellower teeth. We tested this idea empirically by manipulating the tooth color of pictures of male and female targets. Participants' ratings of attractiveness were not influenced by tooth color. Exp. 2 yielded a negative correlation between attractiveness and age ratings: targets judged to be older were rated as less attractive. Unless whiter teeth help in some other way, e.g., improved self-esteem or confidence, it seems that tooth whitening procedures or products are not associated with increased attractiveness to others.

Side effects of external tooth bleaching

DEFF Research Database (Denmark)

Bruzell, E.M.; Pallesen, Ulla; Thoresen, N.R.

2013-01-01

Objective The study was performed to assess the risk of at-home and in-office bleaching procedures, and to recognise potential predictors for side effects. Design Multi-centre, questionnaire-based prospective study with follow-ups at around 14 days and around one year post-treatment. Setting...... General practices and university clinics during the years 2007‑2009 in Scandinavia. Subjects Patients with tooth bleaching as part of the treatment plan. Results The prevalence of experienced tooth sensitivity at first follow-up was independent of bleaching procedure (at-home = 50.3% [n = 143]; in...... attributed to the bleaching treatment in the at-home and in-office groups, respectively. Predictors for side effects were tooth sensitivity, surface loss and gingivitis when observed at inclusion. Treatment-related predictors were bleaching concentration and contact between tray and gingiva. Conclusions...

Clinical evaluation of a newly designed orthodontic tooth brush - A clinical study

Directory of Open Access Journals (Sweden)

C S Saimbi

2009-01-01

In this study, the newly designed orthodontic tooth brush is compared with an ordinary tooth brush. Results of this study show that the newly designed orthodontic tooth brush is superior in its cleaning efficiency as compared to the ordinary tooth brush. The results show that plaque removing capacity of orthodontic tooth brush is nearly 95-99%.

Power Consumption Optimization in Tooth Gears Processing

Science.gov (United States)

Kanatnikov, N.; Harlamov, G.; Kanatnikova, P.; Pashmentova, A.

2018-01-01

The paper reviews the issue of optimization of technological process of tooth gears production of the power consumption criteria. The authors dwell on the indices used for cutting process estimation by the consumed energy criteria and their applicability in the analysis of the toothed wheel production process. The inventors proposed a method for optimization of power consumptions based on the spatial modeling of cutting pattern. The article is aimed at solving the problem of effective source management in order to achieve economical and ecological effect during the mechanical processing of toothed gears. The research was supported by Russian Science Foundation (project No. 17-79-10316).

Addressing Tooth Decay in Head Start Children

Science.gov (United States)

Knowlden, Adam P.; Hill, Lawrence F.; Alles-White, Monica L.; Cottrell, Randall R.

2012-01-01

Tooth decay is the most prevalent chronic disease of childhood. Oral health education and dental services are crucial to reducing the number of children afflicted with dental cavities. Due to limited access to preventative care, Head Start children are particularly vulnerable to tooth decay. This article outlines practical implications of a…

Technological aspects of using protective fuses in low-voltage mine networks

Energy Technology Data Exchange (ETDEWEB)

Kowalski, Z; Pudelko, H

1986-04-01

Protection systems are evaluated for mining equipment used in underground coal mining in Poland. Operation of contactor switches is analyzed. Systems for protection of vacuum contactor switches from overload are comparatively evaluated. Types of current reducers are reviewed. Design of the aM protection fuse which is activated only when overload current exceeds the limiting level is analyzed. Protection fuses with the aM characteristic meeting IEC and VDE requirements for fuses used in SV5, SV7 and SV8 vacuum contactors for power networks of up to 1000 V are evaluated. Characteristics of the vacuum contactors manufactured in Poland are given in 6 diagrams and 2 tables. Reliability of the vacuum contactors with aM protection fuses is analyzed. 8 references.

Relationship between natural tooth shade and skin colour.

Science.gov (United States)

Nourbakhsh, M; Mousavinejad, N; Adli, A R; Harati, M

2013-06-01

The purpose of this study was to assess the correlation of skin colour and tooth shade. One hundred and twenty six individuals aging between 18 to 25 years participated in this study. Colour of the maxillary central incisors was examined by VITA easy shade. Tooth shades were assigned to four ordinal values. Nivea Beauty Protect Foundation shade sample was used as a guide to assess facial skin colour Shin colours were also assigned to four ordinal values. Spearman test revealed that there was a significant relationship between tooth shade and skin colour Total co-relation factor was 51.6% (p men (p <0 .01). The highest tooth shade prevalence belonged to the second group and the highest skin colour prevalence was also in the second skin colour group.

Power loss analysis in altered tooth-sum spur gearing

Directory of Open Access Journals (Sweden)

Sachidananda H. K.

2018-01-01

Full Text Available The main cause of power loss or dissipation of heat in case of meshed gears is due to friction existing between gear tooth mesh and is a major concern in low rotational speed gears, whereas in case of high operating speed the power loss taking place due to compression of air-lubricant mixture (churning losses and windage losses due to aerodynamic trial of air lubricant mixture which controls the total efficiency needs to be considered. Therefore, in order to improve mechanical efficiency it is necessary for gear designer during gear tooth optimization to consider these energy losses. In this research paper the power loss analysis for a tooth-sum of 100 altered by ±4% operating between a specified center distance is considered. The results show that negative altered tooth-sum gearing performs better as compared to standard and positive altered tooth-sum gearing.

Quantification of residual stress from photonic signatures of fused silica

International Nuclear Information System (INIS)

Cramer, K. Elliott; Yost, William T.; Hayward, Maurice

2014-01-01

A commercially available grey-field polariscope (GFP) instrument for photoelastic examination is used to assess impact damage inflicted upon the outer-most pane of Space Shuttle windows made from fused silica. A method and apparatus for calibration of the stress-optic coefficient using four-point bending is discussed. The results are validated on known material (acrylic) and are found to agree with literature values to within 6%. The calibration procedure is then applied to fused-silica specimens and the stress-optic coefficient is determined to be 2.43 ± 0.54 × 10 −12 Pa −1 . Fused silica specimens containing impacts artificially made at NASA’s Hypervelocity Impact Technology Facility (HIT-F), to simulate damage typical during space flight, are examined. The damage sites are cored from fused silica window carcasses and examined with the GFP. The calibrated GFP measurements of residual stress patterns surrounding the damage sites are presented

Coexistence of a pectoralis quartus muscle, a supernumerary head of biceps brachii muscle and an accessory head of flexor digitorum profundus muscle.

Science.gov (United States)

Song, Halim; Kim, Jinu; Yoon, Sang-Pil

2018-05-26

Although anatomical variations in the upper limb are frequent, coexistence of multiple combined variations is rare. During a routine educational dissection at Jeju National University Medical School, three muscular variations were found in a 75-year-old Korean male cadaver, in which a supraclavicular cephalic vein was also found in ipsilateral upper extremity during skinning (Go et al., 2017). Here we describe characteristics of the pectoralis quartus muscle, the supernumerary head of biceps brachii muscle and an accessory head of flexor digitorum profundus muscle, and discuss their coexistence from morphological and embryological points of view.

Full spectrum endoscopy (FUSE) versus standard forward-viewing endoscope (SFV) in a high-risk population

DEFF Research Database (Denmark)

Roepstorff, Søren; Hadi, Sabah Anwar; Rasmussen, Morten

2017-01-01

OBJECTIVES: To investigate the diagnostic performance of Full Spectrum Endoscopy (FUSE) compared to a conventional standard forward-viewing endoscope (SFV). The primary outcome was adenoma detection rate (ADR) and mean adenoma detection. Secondary outcome was feasibility of FUSE opposed to SFV...... intubation time, fentanyl and midazolam sedation, CRC detection, ADR, diverticulosis, bowel preparation, patient discomfort and endoscopist difficulty rating. Participants underwent FUSE colonoscopy on days when the FUSE system was available, while the remaining participants had SFV. All colonoscopies were.......1 ± 6.2 min in the FUSE and SFV groups (p = .040). ADR was 67.0% and 59.6% (p = .097), while the mean adenoma detection was 1.79 and 1.38 (p = .022) in the FUSE and SFV groups. Endoscopists reported increased difficulty rating with FUSE compared to SFV (p > .001). CONCLUSION: FUSE colonoscopy provides...

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens.

Science.gov (United States)

Sidiq, Mohsin; Yousuf, Asif; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam's clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley's appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238.

Infrared light sensor applied to early detection of tooth decay

Science.gov (United States)

Benjumea, Eberto; Espitia, José; Díaz, Leonardo; Torres, Cesar

2017-08-01

The approach dentistry to dental care is gradually shifting to a model focused on early detection and oral-disease prevention; one of the most important methods of prevention of tooth decay is opportune diagnosis of decay and reconstruction. The present study aimed to introduce a procedure for early diagnosis of tooth decay and to compare result of experiment of this method with other common treatments. In this setup, a laser emitting infrared light is injected in core of one bifurcated fiber-optic and conduced to tooth surface and with the same bifurcated fiber the radiation reflected for the same tooth is collected and them conduced to surface of sensor that measures thermal and light frequencies to detect early signs of decay below a tooth surface, where demineralization is difficult to spot with x-ray technology. This device will can be used to diagnose tooth decay without any chemicals and rays such as high power lasers or X-rays.

SM50 repeat-polypeptides self-assemble into discrete matrix subunits and promote appositional calcium carbonate crystal growth during sea urchin tooth biomineralization.

Science.gov (United States)

Mao, Yelin; Satchell, Paul G; Luan, Xianghong; Diekwisch, Thomas G H

2016-01-01

The two major proteins involved in vertebrate enamel formation and echinoderm sea urchin tooth biomineralization, amelogenin and SM50, are both characterized by elongated polyproline repeat domains in the center of the macromolecule. To determine the role of polyproline repeat polypeptides in basal deuterostome biomineralization, we have mapped the localization of SM50 as it relates to crystal growth, conducted self-assembly studies of SM50 repeat polypeptides, and examined their effect on calcium carbonate and apatite crystal growth. Electron micrographs of the growth zone of Strongylocentrotus purpuratus sea urchin teeth documented a series of successive events from intravesicular mineral nucleation to mineral deposition at the interface between tooth surface and odontoblast syncytium. Using immunohistochemistry, SM50 was detected within the cytoplasm of cells associated with the developing tooth mineral, at the mineral secreting front, and adjacent to initial mineral deposits, but not in muscles and ligaments. Polypeptides derived from the SM50 polyproline alternating hexa- and hepta-peptide repeat region (SM50P6P7) formed highly discrete, donut-shaped self-assembly patterns. In calcium carbonate crystal growth studies, SM50P6P7 repeat peptides triggered the growth of expansive networks of fused calcium carbonate crystals while in apatite growth studies, SM50P6P7 peptides facilitated the growth of needle-shaped and parallel arranged crystals resembling those found in developing vertebrate enamel. In comparison, SM50P6P7 surpassed the PXX24 polypeptide repeat region derived from the vertebrate enamel protein amelogenin in its ability to promote crystal nucleation and appositional crystal growth. Together, these studies establish the SM50P6P7 polyproline repeat region as a potent regulator in the protein-guided appositional crystal growth that occurs during continuous tooth mineralization and eruption. In addition, our studies highlight the role of species

Hybrid Z-Θ Pinches with fused capacitor banks

International Nuclear Information System (INIS)

Grandey, R.; Gersten, M.; Loter, N.; Rauch, J.; Rostoker, N.; Thompson, W.; Ware, K.

1987-01-01

The Hybrid Z-Θ Pinch circuit equations in the thin shell model were reexamined to see what advantages can be obtained by using a fused, high-energy (>--1MJ) bank driver. The DNA ACE facility at MLI utilizes a 36 μF capacitor band which can be charged to 120 kV to provide 250 kJ of stored energy. This configuration appears to be very appropriate to test the performance of a hybrid-stabilized fused-bank driven pinch. The circuit analyses suggest that the energy transfer efficiency from the bank to a pinched plasma can be increased from less than 1%, for a nonfused bank, to about 10% for a fused configuration. In the applicable region of parameter space, the Hybrid Pinch does not increase the efficiency of energy transfer into the plasma over that obtainable from a Z-pinch. The additional stability may allow larger initial radii to be used with concomitant improved coupling into radiation above 1 keV

21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bracket adhesive resin and tooth conditioner. 872... SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3750 Bracket adhesive resin and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device...

Visualization of Tooth for Non-Destructive Evaluation from CT Images

Energy Technology Data Exchange (ETDEWEB)

Gao, Hui; Chae, Ok Sam [Kyung Hee University, Seoul (Korea, Republic of)

2009-06-15

This paper reports an effort to develop 3D tooth visualization system from CT sequence images as a part of the non-destructive evaluation suitable for the simulation of endodontics, orthodontics and other dental treatments. We focus on the segmentation and visualization for the individual tooth. In dental CT images teeth are touching the adjacent teeth or surrounded by the alveolar bones with similar intensity. We propose an improved level set method with shape prior to separate a tooth from other teeth as well as the alveolar bones. Reconstructed 3D model of individual tooth based on the segmentation results indicates that our technique is a very conducive tool for tooth visualization, evaluation and diagnosis. Some comparative visualization results validate the non-destructive function of our method.

Angulation change of the third molar tooth in orthodontic treatment

Directory of Open Access Journals (Sweden)

Ardiansyah S. Pawinru

2017-04-01

Full Text Available Objective : Impaction of the third molar tooth mandibular is often found in patients with orthodontic treatment. In orthodontic treatment, extraction cases of impaction of the third molar tooth are usually performed, but the patients often refuse this extraction. Extraction of premolar has a good effect on the third molar mandibular angulation during treatment. Material and Methods : This study is a retrospective clinical study with descriptive analytic to find out the effect of the first mandibular premolar tooth extraction to angulation change of the third molar mandibular in orthodontic treatment with a standard edgewise method. Angulation change was performed by comparing the third molar mandibular angulation before and after orthodontic treatment with panoramic radiographs. Angulation of the third molar tooth mandibular was calculated from the angle formed between the long axis of the tooth with the reference line infraorbita. Results : The sample comprised 60 of impacted mandibular third molar region of the left and right regions of 30 patients who had been treated declared cured in clinic of orthodontic specialist of Dentistry Faculty Padjadjaran University. The sample was divided into three (3 groups of patients before treatment angulation of the third molar tooth mandibular under 300, 300 to 600 and above 60o, then measured change of angulation and observed whether it increased, fixed or decreased. Results were analyzed by T- test and Wilcoxon test showed that there was a significant change in angulation of the third molar mandibular in orthodontic treatment with the first premolar tooth mandibular extraction. Conclusion : This study is that the first premolar tooth mandibular extraction affects the angulation of the third molar tooth mandibular after orthodontic treatment.

The Importance of Tooth Decay Prevention in Children under Three

Science.gov (United States)

Milgrom, Peter; Huebner, Colleen; Chi, Donald

2010-01-01

Tooth decay and tooth loss was once the norm but public health interventions have led to major improvements for most people. Nevertheless, not all children have benefited. Dental disease in young children is unacceptably high. Tooth decay is preventable. Early childhood educators are often the first to notice the problem. Professional…

Promoting positive health behaviours--'tooth worm' phenomenon and its implications.

Science.gov (United States)

Gao, X L; Hsu, C Y S; Xu, Y C; Loh, T; Koh, D; Hwarng, H B

2012-03-01

'Tooth worm' is a traditional belief about the pathogen of dental caries (tooth decay). Nevertheless, in our previous study, parental 'tooth worm' belief was linked to a reduced caries risk of their children. This study aimed to further characterize the impact of parental 'tooth worm' belief on their children's caries experience and its psychobehavioural mechanisms. analytic observational study. Thirteen randomly selected kindergartens in Singapore. 1,782 preschoolers aged 3-6 years. Each child received an oral examination and microbiological tests. Parents completed a self-administered questionnaire on their socio-demographic background, oral health knowledge/attitude and child's oral health habits. Multivariate analysis confirmed a reduced chance of 'high caries rate' (number of affected teeth > 2) among children whose parents held the 'tooth worm' belief (Odds Ratio = 0.41; 95% Confidence Interval = 0.19-0.89). With such perception among parents, children brushed their teeth more frequently (p = 0.042). Since no difference in oral hygiene was observed, the health benefit of the "tooth worm" perception may be acquired through the delivery of fluoride (an agent with proven anti-caries effect) during frequent toothbrushing episodes. This study revealed a 'tooth worm' phenomenon, indicating that parental 'tooth worm' belief is associated with early establishment of regular toothbrushing habit and reduction of dental caries in children. This phenomenon and its psychobehavioural mechanisms, enriching our understanding of oral health behaviours, have implications for effective health education.

Exploding metallic fuse physics experiments

International Nuclear Information System (INIS)

Goforth, J.H.; Hackett, K.E.; Lindemuth, I.R.; Lopez, E.A.; McCullough, W.F.; Dona, H.; Reinovsky, R.E.

1986-01-01

The ultimate practicality of inductive pulse compression systems as drivers for energetic plasma implosions hinges on the development of a suitable opening switch capable of interrupting tons of megamp currents in time scales of a few hundred nanoseconds while withstanding L(dI/dt) voltages of a megavolt or more. 1. Exploding metallic foils (fuses) are a candidate for switching elements in the inductive store pulsed power systems used in the Los Alamos and Air Force Weapons Laboratory foil implosion X-ray source generation programs. To verify or modify new theoretical and computational predictions about the electrical and hydrodynamic behavior of exploding metallic foils used as fuses. The authors have initiated a new series of small scale capacitor bank driven fuse experiments. The experiments represent an extension of previous experiments, but in the new series a foil geometry more amenable to theoretical and computational analysis is used. The metallic foil (aluminum or copper) is laminated between two thin layers of insulating material (mylar or kaptan). Adjacent to one layer of insulation is a much heavier backing insulator (polyethylene) whereas air is adjacent to the other layer. Because of the differing masses on the two sides of the foil, the foil expansion and hydrodynamic motion is essentially one-sided and the layer of insulation on the expanding side becomes a readily-characterizable ''flyer'' which provides a controlled amount of hydrodynamic tamping. In addition to the usual voltage, current, and dI/dt electrical measurements, time-resolved spectrometer measurements are used to determine the temperature of the expanding metallic foil. Post-shot examination of the flyer and the insulation impacted by the flyer gives insight into the experimental behavior

Morphological evaluation of maxillary second molars with fused roots: a micro-CT study.

Science.gov (United States)

Ordinola-Zapata, R; Martins, J N R; Bramante, C M; Villas-Boas, M H; Duarte, M H; Versiani, M A

2017-12-01

To evaluate the internal and external morphologies of fused-rooted maxillary second molars by means of micro-computed tomography (micro-CT) analysis. A total of 100 fused-rooted maxillary second molars from a Brazilian subpopulation were divided into six groups according to the root morphology. The samples were scanned at a resolution of 19.6 μm and evaluated with regard to the external morphology of the roots, the root canal configuration, the percentage frequency of C-shaped canals and isthmuses, as well as the morphology of the root canal system at 1, 2 and 3 mm from the anatomical apex of the fused roots. The most prevalent root canal fusions were type 1, mesiobuccal root fused with distobuccal root (32%), followed by type 3, DB root fused with P root (27%), and type 4, MB root fused with DB root, and P root fused with MB or DB roots (21%). The prevalence of C-shaped root canal systems were 22%. Depending on the type of root fusion, the percentage frequency of isthmuses in the apical level varied from 9.3% to 42.8%, whilst the presence of apical deltas ranged from 18.5% to 57.1% of teeth. The root canal system of maxillary second molars with fused roots may have a high incidence of merging canals, isthmuses, apical deltas and C-shaped configurations. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Electro-Deformation of Fused Cells in a Microfluidic Array Device

Directory of Open Access Journals (Sweden)

Yan Liu

2016-11-01

Full Text Available We present a new method of analyzing the deformability of fused cells in a microfluidic array device. Electrical stresses—generated by applying voltages (4–20 V across discrete co-planar microelectrodes along the side walls of a microfluidic channel—have been used to electro-deform fused and unfused stem cells. Under an electro-deformation force induced by applying an alternating current (AC signal, we observed significant electro-deformation phenomena. The experimental results show that the fused stem cells were stiffer than the unfused stem cells at a relatively low voltage (<16 V. However, at a relatively high voltage, the fused stem cells were more easily deformed than were the unfused stem cells. In addition, the electro-deformation process is modeled based on the Maxwell stress tensor and structural mechanics of cells. The theoretical results show that a positive correlation is found between the deformation of the cell and the applied voltage, which is consistent with the experimental results. Combined with a numerical analysis and experimental study, the results showed that the significant difference of the deformation ratio of the fused and unfused cells is not due to their size difference. This demonstrates that some other properties of cell membranes (such as the membrane structure were also changed in the electrofusion process, in addition to the size modification of that process.

Orthodontic Tooth Movement with Clear Aligners

OpenAIRE

Drake, Carl T.; McGorray, Susan P.; Dolce, Calogero; Nair, Madhu; Wheeler, Timothy T.

2012-01-01

Clear aligners provide a convenient model to measure orthodontic tooth movement (OTM). We examined the role of in vivo aligner material fatigue and subject-specific factors in tooth movement. Fifteen subjects seeking orthodontic treatment at the University of Florida were enrolled. Results were compared with data previously collected from 37 subjects enrolled in a similar protocol. Subjects were followed prospectively for eight weeks. An upper central incisor was programmed to move 0.5 mm. ev...

Refractive index sensors based on the fused tapered special multi-mode fiber

Science.gov (United States)

Fu, Xing-hu; Xiu, Yan-li; Liu, Qin; Xie, Hai-yang; Yang, Chuan-qing; Zhang, Shun-yang; Fu, Guang-wei; Bi, Wei-hong

2016-01-01

In this paper, a novel refractive index (RI) sensor is proposed based on the fused tapered special multi-mode fiber (SMMF). Firstly, a section of SMMF is spliced between two single-mode fibers (SMFs). Then, the SMMF is processed by a fused tapering machine, and a tapered fiber structure is fabricated. Finally, a fused tapered SMMF sensor is obtained for measuring external RI. The RI sensing mechanism of tapered SMMF sensor is analyzed in detail. For different fused tapering lengths, the experimental results show that the RI sensitivity can be up to 444.517 81 nm/RIU in the RI range of 1.334 9—1.347 0. The RI sensitivity is increased with the increase of fused tapering length. Moreover, it has many advantages, including high sensitivity, compact structure, fast response and wide application range. So it can be used to measure the solution concentration in the fields of biochemistry, health care and food processing.

Drugs influencing orthodontic tooth movement: An overall review

Directory of Open Access Journals (Sweden)

Kamatchi Diravidamani

2012-01-01

Full Text Available Orthodontic treatment is based on the premise that when force is delivered to a tooth and thereby transmitted to the adjacent investing tissues, certain mechanical, chemical, and cellular events take place within these tissues, which allow for structural alterations and contribute to the movement of that tooth. Molecules present in drugs and nutrients consumed regularly by patients can reach the mechanically stressed paradental tissues through the circulation and interact with local target cells. The combined effect of mechanical forces and one or more of these agents may be inhibitory, additive, or synergistic. Current orthodontic research aims to develop methods of increasing the tissue concentration of molecules promoting tooth movement, while simultaneously decreasing the concentration of unwanted elements which can produce harmful side effects. This article discusses in detail the various possible drugs that can bring about alterations in the desired orthodontic tooth movement.

Proximal dominant hereditary motor and sensory neuropathy with proximal dominance association with mutation in the TRK-fused gene.

Science.gov (United States)

Lee, Sang-Soo; Lee, Hye Jin; Park, Jin-Mo; Hong, Young Bin; Park, Kee-Duk; Yoo, Jeong Hyun; Koo, Heasoo; Jung, Sung-Chul; Park, Hyung Soon; Lee, Ji Hyun; Lee, Min Goo; Hyun, Young Se; Nakhro, Khriezhanou; Chung, Ki Wha; Choi, Byung-Ok

2013-05-01

Hereditary motor and sensory neuropathy with proximal dominance (HMSN-P) has been reported as a rare type of autosomal dominant adult-onset Charcot-Marie-Tooth disease. HMSN-P has been described only in Japanese descendants since 1997, and the causative gene has not been found. To identify the genetic cause of HMSN-P in a Korean family and determine the pathogenic mechanism. Genetic and observational analysis. Translational research center for rare neurologic disease. Twenty-eight individuals (12 men and 16 women) from a Korean family with HMSN-P. Whole-exome sequencing, linkage analysis, and magnetic resonance imaging. Through whole-exome sequencing, we revealed that HMSN-P is caused by a mutation in the TRK-fused gene (TFG). Clinical heterogeneities were revealed in HMSN-P between Korean and Japanese patients. The patients in the present report showed faster progression of the disease compared with the Japanese patients, and sensory nerve action potentials of the sural nerve were lost in the early stages of the disease. Moreover, tremor and hyperlipidemia were frequently found. Magnetic resonance imaging of the lower extremity revealed a distinct proximal dominant and sequential pattern of muscular involvement with a clearly different pattern than patients with Charcot-Marie-Tooth disease type 1A. Particularly, endoneural blood vessels revealed marked narrowing of the lumen with swollen vesicular endothelial cells. The underlying cause of HMSN-P proves to be a mutation in TFG that lies on chromosome 3q13.2. This disease is not limited to Japanese descendants, and marked narrowing of endoneural blood vessels was noted in the present study. We believe that TFG can affect the peripheral nerve tissue.

Replacing a Missing Tooth

Science.gov (United States)

... lateral incisor. This may be accomplished by adding plastic or porcelain filling material or a porcelain crown ... This type of bridge requires much less tooth reduction of adjacent teeth, and there is no danger ...

[Esthetic analysis on immediate single-tooth implant restoration in anterior maxilla].

Science.gov (United States)

Li, Shao-wei; Wang, Guo-shi; Sha, Yan-zhi

2015-10-01

To evaluate the esthetic outcomes of immediate single-tooth implant restoration in anterior maxilla with the pink esthetic score (PES). Nine patients were treated with 9 Straumann implants by immediate single-tooth implant restoration in anterior maxilla. Assessment of PES after crown placement at 1 week (baseline) and 6 months after implantation was conducted. Statistical analysis was performed using SPSS 16.0 software package. Nine implants achieved a retention rate of 100%. PES for single-tooth implant was 10.33 ± 1.50 at 1 week and 11.44 ± 0.88 at 6 months after crown placement. The difference was significant(P=0.021). This study indicates that immediate single-tooth implant restoration in anterior maxilla is predictable. Immediate single-tooth implantation can result in good clinical esthetic results in most patients with single-tooth missing in anterior maxilla.

Tooth eruption and browridge formation.

Science.gov (United States)

Russell, M D

1982-05-01

One of the most reasonable hypotheses regarding the functional significance of the browridge is that the supraorbital torus forms in response to masticatory stress during development. Oyen, Walker, and Rice (1979) have recently proposed a model that tests this hypothesis: if browridges are functionally related to masticatory stresses on the cranial vault, then changes in the biomechanics of the masticatory system ought to be reflected by changes in the browridge. To test their model they attempted to relate biomechanical discontinuities resulting from tooth eruption to episodes of bone deposition on the supraorbital tori of a developmental series of dry Papio crania. This paper reports on a parallel test of the model on a cross-sectional sample of Australian Aboriginal juvenile crania. This sample showed no relation between tooth eruption and the supraorbital surface morphology thought to be indicative of active bone deposition. It is also demonstrated that no significant relationship between tooth eruption and episodes of bone deposition is shown by the Papio sample. It is concluded that the use of small cross-sectional samples of dry crania does not provide a valid test of the model.

Esthetic enhancement of a traumatized anterior tooth with a combination of forced eruption and tooth alignment: a case report

Science.gov (United States)

Kang, So-Hee; Jin, Myoung-Uk; Kim, Sung-Kyo

2016-01-01

Exposing sound structure of a subgingivally fractured tooth using orthodontic extrusion is considered to be a conservative way to re-establish biologic width without sacrificing esthetics or jeopardizing periodontal support of neighboring teeth. When a misaligned tooth is traumatically involved, a more comprehensive approach combining tooth extrusion and re-alignment may be necessary for a successful restorative outcome. This case report describes a successful esthetic management of a patient with complicated crown-root fracture on the maxillary right central incisor and pre-existing malocclusion in the maxillary anterior region. Forced eruption along with re-alignment of teeth by orthodontic movement seems to allow re-positioning of the fracture line to a favorable position and correction of crowding, providing a better esthetic result. PMID:27508163

ISS protocol for EPR tooth dosimetry

International Nuclear Information System (INIS)

Onori, S.; Aragno, D.; Fattibene, P.; Petetti, E.; Pressello, M.C.

2000-01-01

The accuracy in Electron Paramagnetic Resonance (EPR) dose reconstruction with tooth enamel is affected by sample preparation, dosimetric signal amplitude evaluation and unknown dose estimate. Worldwide efforts in the field of EPR dose reconstruction with tooth enamel are focused on the optimization of the three mentioned steps in dose assessment. In the present work, the protocol implemented at ISS in the framework of the European Community Nuclear Fission Safety project 'Dose Reconstruction' is presented. A combined mechanical-chemical procedure for ground enamel sample preparation is used. The signal intensity evaluation is carried out with powder spectra simulation program. Finally, the unknown dose is evaluated individually for each sample with the additive dose method. The unknown dose is obtained by subtracting a mean native dose from the back-extrapolated dose. As an example of the capability of the ISS protocol in unknown dose evaluation, the results obtained in the framework of the 2nd International Intercomparison on EPR tooth enamel dosimetry are reported

Retrospective individual dosimetry using EPR of tooth enamel

International Nuclear Information System (INIS)

Skvortzo, V.; Ivannikov, A.; Stepanenko, V.; Wieser, A.; Bougai, A.; Brick, A.; Chumak, V.; Radchuk, V.; Repin, V.; Kirilov, V.

1996-01-01

The results of joint investigations (in the framework of ECP-10 program) aimed on the improvement of the sensitivity and accuracy of the procedure of dose measurement using tooth enamel EPR spectroscopy are presented. It is shown, what the sensitivity of method may be increased using special physical-chemical procedure of the enamel samples treatment, which leads to the reducing of EPR signal of organic components in enamel. Tooth diseases may have an effect on radiation sensitivity of enamel. On the basis of statistical analysis of the results of more then 2000 tooth enamel samples measurements it was shown, what tooth enamel EPR spectroscopy gives opportunity to register contribution into total dose, which is caused by natural environmental radiation and by radioactive contamination. EPR response of enamel to ultraviolet exposure is investigated and possible influences to EPR dosimetry is discussed. The correction factors for EPR dosimetry in real radiation fields are estimated

Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

Directory of Open Access Journals (Sweden)

M Aleksander Wysocki

Full Text Available Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month. Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo. Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

Science.gov (United States)

Wysocki, M Aleksander; Feranec, Robert S; Tseng, Zhijie Jack; Bjornsson, Christopher S

2015-01-01

Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month). Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo). Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

Severe tooth wear in Prader-Willi syndrome. A case–control study

Directory of Open Access Journals (Sweden)

Saeves Ronnaug

2012-05-01

Full Text Available Abstract Background Prader-Willi syndrome (PWS is a rare complex multsystemic genetic disorder characterized by severe neonatal hypotonia, endocrine disturbances, hyperphagia and obesity, mild mental retardation, learning disabilities, facial dysmorphology and oral abnormalities. The purpose of the present study was to explore the prevalence of tooth wear and possible risk factors in individuals with Prader-Willi syndrome. Methods Forty-nine individuals (6-40 years with PWS and an age- and sex-matched control group were included. Tooth wear was evaluated from dental casts and intraoral photographs and rated by four examiners using the Visual Erosion Dental Examination (VEDE scoring system and the individual tooth wear index IA. In accordance with the VEDE scoring system, tooth wear was also evaluated clinically. Whole saliva was collected. Results Mean VEDE score was 1.70 ± 1.44 in the PWS group and 0.46 ± 0.36 in the control group (p A was 7.50 (2.60-30.70 in the PWS group and 2.60 (0.90-4.70 among controls (p A; r = 0.82, p A; r = 0.43, p = 0.002. Tooth grinding was also associated with tooth wear in the PWS group, as indicated by the mean VEDE 2.67 ± 1.62 in grinders and 1.14 ± 0.97 in non-grinders (p = 0.001 and median IA values 25.70 (5.48-68.55 in grinders and 5.70 (1.60-9.10 in non-grinders (p = 0.003. Multivariate linear regression analysis was performed with tooth wear as the dependent variable and PWS (yes/no, age, tooth grinding and saliva secretion as independent variables. PWS (yes/no, age and tooth grinding retained a significant association with tooth wear, VEDE (p A (p  Conclusions Our study provides evidence that tooth wear, in terms of both erosion and attrition, is a severe problem in Prader-Willi syndrome. There is therefore considerable need for prosthodontic rehabilitation in young adults with PWS.

Tooth fragment reattachment techniques-A systematic review.

Science.gov (United States)

Garcia, Fernanda Cristina P; Poubel, Déborah L N; Almeida, Júlio César F; Toledo, Isabela P; Poi, Wilson R; Guerra, Eliete N S; Rezende, Liliana V M L

2018-03-07

Several strategies have been developed for tooth fragment reattachment following fracture. Although many techniques have been reported, there is no consensus on which one has the best results in terms of the bond strength between the fragment and the dentin over time. The aim of this study was to assess the currently reported tooth fragment reattachment techniques for fractured crowns of anterior teeth. The PubMed, LILACS, Web of Science, Cochrane, and Scopus databases were searched in October 2016, and the search was updated in February 2017. A search of the gray literature was performed in Google Scholar and OpenGrey. Reference lists of eligible studies were cross-checked to identify additional studies; gray literature and ongoing trials were investigated. Two authors assessed studies to determine inclusion and undertook data extraction. Case reports/series of three or more cases, cross-sectional studies, cohort studies, and in vivo clinical trials in all languages were included. Five articles remained after screening. These studies predominantly reported on fragment reattachment with composite resin and resin cement. There was little consistency among the studies in regard to the technique used for tooth fragment reattachment and length of the follow-up period. According to the evidence found in the studies included in this review, simple tooth fragment reattachment was the preferred reattachment technique. An increase in the bond strength between tooth fragment and dentin was observed when an intermediate material was used. Further investigation is needed, using standard follow-up periods and larger samples. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Electron paramagnetic resonance biophysical radiation dosimetry with tooth enamel

International Nuclear Information System (INIS)

Khan, Rao F.H.

2003-01-01

This thesis deals with the advancements made in the field of Electron Paramagnetic Resonance (EPR) for biophysical dosimetry with tooth enamel for accident, emergency, and retrospective radiation dose reconstruction. A methodology has been developed to measure retrospective radiation exposures in human tooth enamel. This entails novel sample preparation procedures with minimum mechanical treatment to reduce the preparation induced uncertainties, establish optimum measurement conditions inside the EPR cavity, post-process the measured spectrum with functional simulation of dosimetric and other interfering signals, and reconstruct dose. By using this technique, retrospective gamma exposures as low as 80±30 mGy have been successfully deciphered. The notion of dose modifier was introduced in EPR biodosimetry for low dose measurements. It has been demonstrated that by using the modified zero added dose (MZAD) technique for low radiation exposures, doses in 100 mGy ranges can be easily reconstructed in teeth that were previously thought useless for EPR dosimetry. Also, the use of a dose modifier makes robust dose reconstruction possible for higher radiation exposures. The EPR dosimetry technique was also developed for tooth samples extracted from rodents, which represent small tooth sizing. EPR doses in the molars, extracted from the mice irradiated with whole body exposures, were reassessed and shown to be correct within the experimental uncertainty. The sensitivity of human tooth enamel for neutron irradiation, obtained from the 3 MV McMaster K.N. Van de Graaff accelerator, was also studied. For the first time this work has shown that the neutron sensitivity of the tooth enamel is approximately 1/10th of the equivalent gamma sensitivity. Parametric studies for neutron dose rate and neutron energy within the available range of the accelerator, showed no impact on the sensitivity of the tooth enamel. Therefore, tooth enamel can be used as a dosimeter for both neutrons

Relationship between food habits and tooth erosion occurrence in Malaysian University students.

Science.gov (United States)

Manaf, Zahara Abdul; Lee, Mei Tee; Ali, Nor Hazirah Muhammad; Samynathan, Selvamary; Jie, Ying Phor; Ismail, Noor Hasnani; Bibiana Hui Ying, Yong; Wei Seng, Yeo; Yahya, Nurul Asyikin

2012-04-01

Tooth erosion is a growing dental problem; however, the role of diet in the aetiology of tooth erosion is unclear. A cross-sectional study was conducted to determine the association between tooth erosion occurrence and the consumption of acidic foods and drinks among undergraduate university students. A total of 150 undergraduate students (33 males and 117 females) aged 19 to 24 years at Universiti Kebangsaan Malaysia participated in this study. The Basic Erosive Wear Examination was used to assess the occurrence of tooth erosion. Information regarding dental hygiene practices, usual dietary habits, and consumption of acidic foods and drinks was obtained through a structured questionnaire. In all, 68% of subjects had tooth erosion. Subjects who reported having received information about healthy eating were less likely to have tooth erosion (χ(2) [1, N = 150] = 7.328, P = 0.007). The frequencies of milk (OR = 0.29, 95% CI = 0.13-0.67) and tea/coffee (adjusted OR = 0.42, 95% CI = 0.19-0.95) consumption were negatively associated with tooth erosion. Dental hygiene practice, the frequency and amount of acidic food and drink intake, and body mass index classification were not significantly associated with the risk of tooth erosion (P > 0.05). A high prevalence of tooth erosion was observed among this group of students. Preventive measures, such as dietary advice and increased consumption of milk at a younger age, may reduce the occurrence of tooth erosion among this age group.

Orthodontic Management of a Severely Rotated Maxillary Central Incisor in the Mixed Dentition: A Case Report

Directory of Open Access Journals (Sweden)

Arezoo Jahanbin

2014-06-01

Full Text Available The aim of this case report was to introduce an appliance for correcting severe rotation of anterior teeth in the mixed dentition period. A 9-year-old Iranian boy with a mixed dentition Class I malocclusion complained of a severely rotated of upper right central incisor. There was a mesiodens between the central incisors. The supernumerary tooth was first extracted and then a Whip appliance which is composed of a removable plate, a cantilever spring and a central bracket on the rotated tooth was utilized. After 8 months, the upper right central incisor was orthodontically brought into proper alignment. Circumferential supracrestal fibrotomy was performed on the overcorrected tooth. One week after surgery, the device was removed and the retention was started. The whip appliance is a removable appliance that can effectively correct severe rotation of anterior teeth especially during the mixed dentition period.

Non-destructive evaluation of UV pulse laser-induced damage performance of fused silica optics.

Science.gov (United States)

Huang, Jin; Wang, Fengrui; Liu, Hongjie; Geng, Feng; Jiang, Xiaodong; Sun, Laixi; Ye, Xin; Li, Qingzhi; Wu, Weidong; Zheng, Wanguo; Sun, Dunlu

2017-11-24

The surface laser damage performance of fused silica optics is related to the distribution of surface defects. In this study, we used chemical etching assisted by ultrasound and magnetorheological finishing to modify defect distribution in a fused silica surface, resulting in fused silica samples with different laser damage performance. Non-destructive test methods such as UV laser-induced fluorescence imaging and photo-thermal deflection were used to characterize the surface defects that contribute to the absorption of UV laser radiation. Our results indicate that the two methods can quantitatively distinguish differences in the distribution of absorptive defects in fused silica samples subjected to different post-processing steps. The percentage of fluorescence defects and the weak absorption coefficient were strongly related to the damage threshold and damage density of fused silica optics, as confirmed by the correlation curves built from statistical analysis of experimental data. The results show that non-destructive evaluation methods such as laser-induced fluorescence and photo-thermal absorption can be effectively applied to estimate the damage performance of fused silica optics at 351 nm pulse laser radiation. This indirect evaluation method is effective for laser damage performance assessment of fused silica optics prior to utilization.

Use of quantitative light-induced fluorescence to monitor tooth whitening

Science.gov (United States)

Amaechi, Bennett T.; Higham, Susan M.

2001-04-01

The changing of tooth shade by whitening agents occurs gradually. Apart from being subjective and affected by the conditions of the surroundings, visual observation cannot detect a very slight change in tooth color. An electronic method, which can communicate the color change quantitatively, would be more reliable. Quantitative Light- induced Fluorescence (QLF) was developed to detect and assess dental caries based on the phenomenon of change of autofluorescence of a tooth by demineralization. However, stains on the tooth surface exhibit the same phenomenon, and therefore QLF can be used to measure the percentage fluorescence change of stained enamel with respect to surrounding unstained enamel. The present study described a technique of assessing the effect of a tooth-whitening agent using QLF. This was demonstrated in two experiments in which either wholly or partially stained teeth were whitened by intermittent immersion in sodium hypochlorite. Following each immersion, the integrated fluorescence change due to the stain was quantified using QLF. In either situation, the value of (Delta) Q decreased linearly as the tooth regained its natural shade. It was concluded that gradual changing of the shade of discolored teeth by a whitening agent could be quantified using QLF.

[Orthodontic and oral surgery therapy in cleidocranial dysplasia].

Science.gov (United States)

Balaton, Gergely; Tarján, Ildikó; Balaton, Péter; Barabási, Zoltán; Gyulai Gál, Szabolcs; Nagy, Katalin; Vajó, Zoltán

2007-02-01

A cleidocranial dysplasia is an autosomal dominant inherited condition consisting of generalized skeletal disorder. Associated dental signs are present in 93,5%; failure of tooth eruption with multiple supernumerary teeth, dilaceration of roots, crown germination, microdontia, high arched palate, midface hypoplasia, high gonion angle. The molecular- genetic analysis revealed a missense mutation in the CBFA1 gene located on chromosome 6p21, which is considered to be etiological factor for CCD. Orthodontic and oral surgery therapy of a 13 year-old child with CCD was performed due to aesthetic and functional problems. The supernumerary germs were removed and the teeth were aligned with orthodontic appliances. Temporary functional rehabilitation was solved with partial denture. The presented case and the literature data support the importance of early diagnosis of CCD. The good collaboration of the orthodontic and maxillo-facial surgery specialists help achieve the correct rehabilitation of the patient.

To Tell the Tooth

Science.gov (United States)

... Activity Sheets 2018 Brushing Calendar Sports Safety National Nutrition Month Choose Water for a Sparkling Smile Holiday Workshop Thanksgiving Back to School Fourth of July Fun Tooth Fairy Sugar Wars Valentine's Day Halloween Defeat Monster Mouth! Color and ...

Rainbows, supernumerary rainbows and interference effects in the angular scattering of chemical reactions: an investigation using Heisenberg's S matrix programme.

Science.gov (United States)

Shan, Xiao; Xiahou, Chengkui; Connor, J N L

2018-01-03

In earlier research, we have demonstrated that broad "hidden" rainbows can occur in the product differential cross sections (DCSs) of state-to-state chemical reactions. Here we ask the question: can pronounced and localized rainbows, rather than broad hidden ones, occur in reactive DCSs? Further motivation comes from recent measurements by H. Pan and K. Liu, J. Phys. Chem. A, 2016, 120, 6712, of a "bulge" in a reactive DCS, which they conjecture is a rainbow. Our theoretical approach uses a "weak" version of Heisenberg's scattering matrix program (wHSMP) introduced by X. Shan and J. N. L. Connor, Phys. Chem. Chem. Phys., 2011, 13, 8392. This wHSMP uses four general physical principles for chemical reactions to suggest simple parameterized forms for the S matrix; it does not employ a potential energy surface. We use a parameterization in which the modulus of the S matrix is a smooth-step function of the total angular momentum quantum number, J, and (importantly) its phase is a cubic polynomial in J. We demonstrate for a Legendre partial wave series (PWS) the existence of pronounced rainbows, supernumerary rainbows, and other interference effects, in reactive DCSs. We find that reactive rainbows can be more complicated in their structure than the familiar rainbows of elastic scattering. We also analyse the angular scattering using Nearside-Farside (NF) PWS theory and NF PWS Local Angular Momentum (LAM) theory, including resummations of the PWS. In addition, we apply full and NF asymptotic (semiclassical) rainbow theories to the PWS - in particular, the uniform Airy and transitional Airy approximations for the farside scattering. This lets us prove that structure in the DCSs are indeed rainbows, supernumerary rainbows as well as other interference effects.

FFT-enhanced IHS transform method for fusing high-resolution satellite images

Science.gov (United States)

Ling, Y.; Ehlers, M.; Usery, E.L.; Madden, M.

2007-01-01

Existing image fusion techniques such as the intensity-hue-saturation (IHS) transform and principal components analysis (PCA) methods may not be optimal for fusing the new generation commercial high-resolution satellite images such as Ikonos and QuickBird. One problem is color distortion in the fused image, which causes visual changes as well as spectral differences between the original and fused images. In this paper, a fast Fourier transform (FFT)-enhanced IHS method is developed for fusing new generation high-resolution satellite images. This method combines a standard IHS transform with FFT filtering of both the panchromatic image and the intensity component of the original multispectral image. Ikonos and QuickBird data are used to assess the FFT-enhanced IHS transform method. Experimental results indicate that the FFT-enhanced IHS transform method may improve upon the standard IHS transform and the PCA methods in preserving spectral and spatial information. ?? 2006 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

The development of complex tooth shape in reptiles

Science.gov (United States)

Zahradnicek, Oldrich; Buchtova, Marcela; Dosedelova, Hana; Tucker, Abigail S.

2014-01-01

Reptiles have a diverse array of tooth shapes, from simple unicuspid to complex multicuspid teeth, reflecting functional adaptation to a variety of diets and eating styles. In addition to cusps, often complex longitudinal labial and lingual enamel crests are widespread and contribute to the final shape of reptile teeth. The simplest shaped unicuspid teeth have been found in piscivorous or carnivorous ancestors of recent diapsid reptiles and they are also present in some extant carnivores such as crocodiles and snakes. However, the ancestral tooth shape for squamate reptiles is thought to be bicuspid, indicating an insectivorous diet. The development of bicuspid teeth in lizards has recently been published, indicating that the mechanisms used to create cusps and crests are very distinct from those that shape cusps in mammals. Here, we introduce the large variety of tooth shapes found in lizards and compare the morphology and development of bicuspid, tricuspid, and pentacuspid teeth, with the aim of understanding how such tooth shapes are generated. Next, we discuss whether the processes used to form such morphologies are conserved between divergent lizards and whether the underlying mechanisms share similarities with those of mammals. In particular, we will focus on the complex teeth of the chameleon, gecko, varanus, and anole lizards using SEM and histology to compare the tooth crown morphology and embryonic development. PMID:24611053

The development of complex tooth shape in reptiles

Directory of Open Access Journals (Sweden)

Oldrich eZahradnicek

2014-02-01

Full Text Available Reptiles have a diverse array of tooth shapes, from simple unicuspid to complex multicuspid teeth, reflecting functional adaptation to a variety of diets and eating styles. In addition to cusps, often complex longitudinal labial and lingual enamel crests are widespread and contribute to the final shape of reptile teeth. The simplest shaped unicuspid teeth have been found in piscivorous or carnivorous ancestors of recent diapsid reptiles and they are also present in some extant carnivores such as crocodiles and snakes. However, the ancestral tooth shape for squamate reptiles is thought to be bicuspid, indicating an insectivorous diet. The development of bicuspid teeth in lizards has recently been published, indicating that the mechanisms used to create cusps and crests are very distinct from those that shape cusps in mammals. Here, we introduce the large variety of tooth shapes found in lizards and compare the morphology and development of bicuspid, tricuspid and pentacuspid teeth, with the aim of understanding how such tooth shapes are generated. Next, we discuss whether the processes used to form such morphologies are conserved between divergent lizards and whether the underlying mechanisms share similarities with those of mammals. In particular, we will focus on the complex teeth of the chameleon, gecko, varanus and anole lizards using SEM and histology to compare the tooth crown morphology and embryonic development.

Mechanisms underlying ectopic persistent tooth-pulp pain following pulpal inflammation.

Directory of Open Access Journals (Sweden)

Shingo Matsuura

Full Text Available In order to clarify the peripheral mechanisms of ectopic persistent pain in a tooth pulp following pulpal inflammation of an adjacent tooth, masseter muscle activity, phosphorylated extracellular signal-regulated protein kinase (pERK and TRPV1 immunohistochemistries and satellite cell activation using glial fibrillary acidic protein (GFAP immunohistochemistry in the trigeminal ganglion (TG were studied in the rats with molar tooth-pulp inflammation. And, Fluorogold (FG and DiI were also used in a neuronal tracing study to analyze if some TG neurons innervate more than one tooth pulp. Complete Freund's adjuvant (CFA or saline was applied into the upper first molar tooth pulp (M1 in pentobarbital-anesthetized rats, and capsaicin was applied into the upper second molar tooth pulp (M2 on day 3 after the CFA or saline application. Mean EMG activity elicited in the masseter muscle by capsaicin application to M2 was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats. The mean number of pERK-immunoreactive (IR TG cells was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats. Application of the satellite cell inhibitor fluorocitrate (FC into TG caused a significant depression of capsaicin-induced masseter muscle activity and a significant reduction of satellite cell activation. The number of TRPV1-IR TG cells innervating M2 was significantly larger in M1 CFA-applied rats compared with M1 vehicle-applied rats, and that was decreased following FC injection into TG. Furthermore, 6% of TG neurons innervating M1 and/or M2 innervated both M1 and M2. These findings suggest that satellite cell activation following tooth pulp inflammation and innervation of multiple tooth pulps by single TG neurons may be involved in the enhancement of the activity of TG neurons innervating adjacent non-inflamed teeth that also show enhancement of TRPV1 expression in TG neurons, resulting in the ectopic persistent tooth

Computer simulation of gear tooth manufacturing processes

Science.gov (United States)

Mavriplis, Dimitri; Huston, Ronald L.

1990-01-01

The use of computer graphics to simulate gear tooth manufacturing procedures is discussed. An analytical basis for the simulation is established for spur gears. The simulation itself, however, is developed not only for spur gears, but for straight bevel gears as well. The applications of the developed procedure extend from the development of finite element models of heretofore intractable geometrical forms, to exploring the fabrication of nonstandard tooth forms.

Tooth-germ damage by ionizing radiation

International Nuclear Information System (INIS)

Sobkowiak, E.M.; Beetke, E.; Bienengraeber, V.; Held, M.; Kittner, K.H.

1977-01-01

Experiments on animals (four-week-old dogs) were conducted in an investigation made to study the possibility of dose-dependent tooth-germ damage produced by ionizing radiation. The individual doses were 50 R and 200 R, respectively, and they were administered once to three times at weekly intervals. Hyperemia and edemata could be observed on tooth-germ pulps from 150 R onward. Both of these conditions became more acute as the radiation dose increased (from 150 R to 600 R). Possible damage to both the dentin and enamel is pointed out. (author)

Effect of the vitality of the overdenture abutment tooth on stability of the tooth

Directory of Open Access Journals (Sweden)

Khalid Ahmad Omar Arafa

2016-01-01

Conclusion: It was concluded that the overdenture over vital abutment teeth was more stable, with a lower incidence of tooth mobility and less attachment loss than overdentures placed on nonvital teeth.

Biogeneric tooth: a new mathematical representation for tooth morphology in lower first molars.

Science.gov (United States)

Mehl, Albert; Blanz, Volker; Hickel, Reinhard

2005-08-01

A mathematical representation of tooth morphology may help to improve and automate restorative computer-aided design processes, virtual dental education, and parametric morphology. However, to date, no quantitative formulation has been identified for the description of dental features. The aim of this study was to establish and to validate a mathematical process for describing the morphology of first lower molars. Stone replicas of 170 caries-free first lower molars from young patients were measured three-dimensionally with a resolution of about 100,000 points. First, the average tooth was computed, which captures the common features of the molar's surface quantitatively. For this, the crucial step was to establish a dense point-to-point correspondence between all teeth. The algorithm did not involve any prior knowledge about teeth. In a second step, principal component analysis was carried out. Repeated for 3 different reference teeth, the procedure yielded average teeth that were nearly independent of the reference (less than +/- 40 microm). Additionally, the results indicate that only a few principal components determine a high percentage of the three-dimensional shape variability of first lower molars (e.g. the first five principal components describe 52% of the total variance, the first 10 principal components 72% and the first 20 principal components 83%). With the novel approach presented in this paper, surfaces of teeth can be described efficiently in terms of only a few parameters. This mathematical representation is called the 'biogeneric tooth'.

Colored fused filament fabrication

OpenAIRE

Song, Haichuan; Lefebvre, Sylvain

2017-01-01

Filament fused fabrication is the method of choice for printing 3D models at low cost, and is the de-facto standard for hobbyists, makers and schools. Unfortunately, filament printers cannot truly reproduce colored objects. The best current techniques rely on a form of dithering exploiting occlusion, that was only demonstrated for shades of two base colors and that behaves differently depending on surface slope. We explore a novel approach for 3D printing colored objects, capable of creating ...

Daylong Effect of Tooth Brushing or Combination Tooth Brushing and Tongue Cleaning Using Antiplaque®Toothpaste on Volatile Sulphur Compound Levels

Directory of Open Access Journals (Sweden)

Indriasti Indah Wardhany

2013-07-01

Full Text Available Objective: to determine the daylong effect of Antiplaque® toothpaste active copound and the effect of tooth brushing or combination of tooth brushing and tongue cleaning on Volatile Sulphur Compounds (VSC levels. Methods: Clinical experimental double blinded microbiological and clinical examination. Subjects mainly from dental faculty student with or without a chief complain of halitosis. One hundred and twenty subjects were divided into four groups that consist of thirty samples each group. Two group are treatment subjects were divided into four groups that consist thirty samples each group. Two groups are treatment groups using Antiplaque® toothpaste and two groups are control groups using placebo toothpaste. The daylong effects of VSC levels are measured by Halimeter and organoleptic. The intraoral status were measured including periodontal status and tongue index. Result: There are a reduction of VSC levels in both treatment and control group, but the reduction only significant in group using Antiplaque® toothpaste (Wilcoxon signed rank test, p<0.05. There are a reduction of VSC levels in both treatment using Antiplaque® toothpaste, but the combination of tooth brushing and tongue cleaning reduced VSC levels significantly lower than tooth brushing treatment (Mann Whitney U test, P,0.05. Conclusion: Tooth brushing and tongue cleaning using Antiplaque® toothpaste significantly reduced VSC levels.DOI: 10.14693/jdi.v16i2.95

The effect of light-activation sources on tooth bleaching

Science.gov (United States)

Baroudi, Kusai; Hassan, Nadia Aly

2014-01-01

Vital bleaching is one of the most requested cosmetic dental procedures asked by patients who seek a more pleasing smile. This procedure consists of carbamide or hydrogen peroxide gel applications that can be applied in-office or by the patient (at-home/overnight bleaching system). Some in-office treatments utilise whitening light with the objective of speeding up the whitening process. The objective of this article is to review and summarise the current literature with regard to the effect of light-activation sources on in-office tooth bleaching. A literature search was conducted using Medline, accessed via the National Library of Medicine Pub Med from 2003 to 2013 searching for articles relating to effectiveness of light activation sources on in-office tooth bleaching. This study found conflicting evidence on whether light truly improve tooth whitening. Other factors such as, type of stain, initial tooth colour and subject age which can influence tooth bleaching outcome were discussed. Conclusions: The use of light activator sources with in-office bleaching treatment of vital teeth did not increase the efficacy of bleaching or accelerate the bleaching. PMID:25298598

Tooth wear

OpenAIRE

Tušek Ivan; Tušek Jasmina

2014-01-01

Tooth wear is the loss of dental hard tissue that was not caused by decay and represents a common clinical problem of modern man. In the etiology of dental hard tissue lesions there are three dominant mechanisms that may act synergistically or separately:friction (friction), which is caused by abrasion of exogenous, or attrition of endogenous origin, chemical dissolution of dental hard tissues caused by erosion, occlusal stress created by compression and flexion and tension that leads to toot...

Effect of Cervical Lessions on the Tooth FEM Study

Directory of Open Access Journals (Sweden)

Gabriela Bereşescu

2010-12-01

Full Text Available The approach used until recently concerning the phenomena of dental abfraction points to the conclusion that the cervical area of the tooth, were this type of lesion usually occur, concentrates the stress resulted from the action of the forces applied on various areas on the crown. Moreover, any lesion in the cervical area facilitates the possibility of its advance into the tooth, ultimately fracturing it. Our paper presents a FEM (finite element method study on the results of a mechanical analysis of the phenomena involving the tooth damaged by cervical lesions.

Proteomic Analysis of Human Tooth Pulp: Proteomics of Human Tooth

Czech Academy of Sciences Publication Activity Database

Eckhardt, Adam; Jágr, Michal; Pataridis, Statis; Mikšík, Ivan

2014-01-01

Roč. 40, č. 12 (2014), s. 1961-1966 ISSN 0099-2399 R&D Projects: GA ČR(CZ) GA13-17224S; GA ČR(CZ) GAP206/12/0453; GA MZd(CZ) NT14324 Institutional support: RVO:67985823 Keywords : dentin * human pulp * tandem mass spectrometry * tooth proteome * 2-dimensional gel electrophoresis Subject RIV: FF - HEENT, Dentistry Impact factor: 3.375, year: 2014

Claustral single cell reactions to tooth pulp stimulation in cats.

Science.gov (United States)

Jastreboff, P; Sikora, M; Frydrychowski, A; Słoniewski, P

1983-01-01

Single unit activity in the central region of the claustrum, evoked by electrical stimulation of tooth pulp or paws was studied on cats under chloralose anesthesia. The majority of cells responded in similar manner to stimulation of tooth pulp or paws, but there were cells with clear preference to a given type of stimulation. Latencies of reactions evoked by tooth pulp stimulation were significantly shorter than those for limb stimulation. In the former case latencies as short as 8 rns were observed. It is postulated that the central region of the claustrum receives a projection from the tooth pulp, and that in those cases with very short latency the projection is direct and does not involve the cerebral cortex.

Dental diseases of dogs: a retrospective study of radiological data

International Nuclear Information System (INIS)

Butkovic, V.; Sehic, M.; Stanin, D.; Simpraga, M.; Susic, V.; Capak, D.; Kos, J.

2001-01-01

The purpose of the present study was to assess the number of pathological dental changes and anomalies in dogs. The incidence of dental diseases was investigated in radiologically examined 139 males and 120 females, aged from 7 months to 15 years. The incidence of oligodontia equalled to 45.17 %, peridontitis 44.40 %, fracture 19.30 %, tooth rotation 11.5 %, persisting deciduous teeth 5.40 % and supernumerary teeth 3.86 %. Incidence of dental changes and anomalies differed significantly between dogs of different age groups. Considering the hereditary nature of the anomalies such as congenital oligodontia, tooth rotation and retained deciduous teeth, dog breeders should provide for a timely X-ray examination and, in case of these anomalies, exclude the affected dogs from further breeding

Treatment of tooth fracture by medium-energy CO2 laser and DP-bioactive glass paste: the interaction of enamel and DP-bioactive glass paste during irradiation by CO2 laser.

Science.gov (United States)

Lin, C P; Tseng, Y C; Lin, F H; Liao, J D; Lan, W H

2001-03-01

Acute trauma or trauma associated with occlusal disturbance can produce tooth crack or fracture. Although several methods are proposed to treat the defect, however, the prognosis is generally poor. If the fusion of a tooth fracture by laser is possible, it will offer an alternative to extraction or at least serve as an adjunctive treatment in the reconstruction. We have tried to use a continuous-wave CO2 laser and a newly developed DP-bioactive glass paste (DPGP) to fuse or bridge tooth crack or fracture lines. Both the DP-bioactive glass paste and tooth enamel have strong absorption bands at the wavelength of 10.6 microm. Therefore, under CO2 laser, DPGP and enamel should have an effective absorption and melt together. The interface between DPGP and enamel could be regarded as a mixture of DPGP and enamel (DPG-E). The study focused on the phase transformation, microstructure, functional group and thermal behavior of DPG-E with or without CO2 laser irradiation, by the analytical techniques of XRD, FTIR, DTA/TGA, and SEM. The results of XRD showed that the main crystal phase in the DPG-E was dicalcium phosphate dihydrate (CaHPO4.2H2O). It changed into CaHPO4, gamma-Ca2P2O7, beta-Ca2P2O7 and finally alpha-Ca2P2O7 with increasing temperature. In the FTIR analysis, the 720 cm(-1) absorption band ascribed to the P-O-P linkage in pyrophosphate rose up and the intensities of the OH- bands reduced after laser irradiation. In regard to the results of DTA/TGA after irradiation, the weight loss decreased due to the removal of part of absorption water and crystallization water by the CO2 laser. SEM micrographs revealed that the melted masses and the plate-like crystals formed a tight chemical bond between the enamel and DPGP. We expect that DPGP with the help of CO2 laser can be an alternative to the treatment of tooth crack or fracture.

Tooth erosion and eating disorders: a systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Ana Paula Hermont

Full Text Available BACKGROUND: Eating disorders are associated with the highest rates of morbidity and mortality of any mental disorders among adolescents. The failure to recognize their early signs can compromise a patient's recovery and long-term prognosis. Tooth erosion has been reported as an oral manifestation that might help in the early detection of eating disorders. OBJECTIVES: The aim of this systematic review and meta-analysis was to search for scientific evidence regarding the following clinical question: Do eating disorders increase the risk of tooth erosion? METHODS: An electronic search addressing eating disorders and tooth erosion was conducted in eight databases. Two independent reviewers selected studies, abstracted information and assessed its quality. Data were abstracted for meta-analysis comparing tooth erosion in control patients (without eating disorders vs. patients with eating disorders; and patients with eating disorder risk behavior vs. patients without such risk behavior. Combined odds ratios (ORs and a 95% confidence interval (CI were obtained. RESULTS: Twenty-three papers were included in the qualitative synthesis and assessed by a modified version of the Newcastle-Ottawa Scale. Fourteen papers were included in the meta-analysis. Patients with eating disorders had more risk of tooth erosion (OR = 12.4, 95%CI = 4.1-37.5. Patients with eating disorders who self-induced vomiting had more risk of tooth erosion than those patients who did not self-induce vomiting (OR = 19.6, 95%CI = 5.6-68.8. Patients with risk behavior of eating disorder had more risk of tooth erosion than patients without such risk behavior (Summary OR = 11.6, 95%CI = 3.2-41.7. CONCLUSION: The scientific evidence suggests a causal relationship between tooth erosion and eating disorders and purging practices. Nevertheless, there is a lack of scientific evidence to fulfill the basic criteria of causation between the risk behavior for eating disorders and tooth erosion.

A Dental Hygienist's and Therapist's Guide to the Management of Tooth Erosion.

Science.gov (United States)

Ariyanayagam, Yana

2016-08-01

Dental care professionals can support patients to prevent and manage tooth erosion. The role of the dentist is to restore the structure and function of teeth damaged by acid erosion, while the role of the dental hygienist therapist is to work alongside the dentist to help manage and reduce the risk of tooth erosion. This article will highlight how the dental hygienist or therapist can identify tooth erosion. It will describe the features of tooth erosion and outline the causes. This article will discuss preventative care options for patients who are at risk of tooth erosion, including specific oral hygiene instructions, fluoride advice and use of other dental products.

A design of speed reducer with trapezoidal tooth profile for robot manipulator

Energy Technology Data Exchange (ETDEWEB)

Nam, Won Ki; Oh, Se Hoon [Chung-Ang University, Seoul (Korea, Republic of)

2011-01-15

Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study.

A design of speed reducer with trapezoidal tooth profile for robot manipulator

International Nuclear Information System (INIS)

Nam, Won Ki; Oh, Se Hoon

2011-01-01

Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study

Mesiodistal tooth angulation to segmental occlusal plane in panoramic radiography

International Nuclear Information System (INIS)

Kim, Jae Duk; Kim, Jin Soo; You, Choong Hyun

2005-01-01

To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occulsion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

Mesiodistal tooth angulation to segmental occlusal plane in panoramic radiography

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Duk; Kim, Jin Soo; You, Choong Hyun [Chosun University College of Medicine, Kwangju (Korea, Republic of)

2005-03-15

To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occulsion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

Fungal Systematics and Evolution: FUSE 1

NARCIS (Netherlands)

Crous, Pedro W; Schumacher, René K; Wingfield, Michael J; Lombard, Lorenzo; Giraldo, Alejandra; Christensen, Martha; Gardiennet, Alain; Nakashima, Chiharu; Pereira, Olinto L; Smith, Alexander J; Groenewald, Johannes Z

2015-01-01

Fungal Systematics and Evolution (FUSE) is introduced as a new series to expedite the publication of issues relating to the epitypification of formerly described species, report new sexual-asexual connections, the merging of sexual and asexual gen¬era following the end of dual nomenclature, and to

Treatment of a Developmental Groove and Supernumerary Root Using Guided Tissue Regeneration Technique

Directory of Open Access Journals (Sweden)

Zahra Alizadeh Tabari

2016-01-01

Full Text Available Introduction. The radicular groove is a developmental groove which is usually found on the palatal or lateral aspects of the maxillary incisor teeth. The present case is a maxillary lateral incisor with a small second root and a deep radicular groove. The developmental groove caused a combined periodontal-endodontic lesion. Methods. Case was managed using a combined treatment procedure involving nonsurgical root canal therapy and surgical periodontal treatment. After completion of root canal treatment, guided tissue regeneration (GTR was carried out using decalcified freeze dried bone allograft (DFDBA and a bioabsorbable collagenous membrane. Tooth also was splinted for two months. Results. After 12 months the tooth was asymptomatic. The periapical radiolucency disappeared and probing depth did not exceed 3 mm. Conclusion. Combined treatment procedure involving nonsurgical root canal therapy and surgical periodontal regenerative treatment can be a predictable technique in treating combined endodontic-periodontal lesions caused by radicular groove.

Concomitant hypo-hyperdontia: A rare entity

Directory of Open Access Journals (Sweden)

Yin-Lin Wang

2018-03-01

Full Text Available Background/purpose: Concomitant hypo-hyperdontia (CHH is a rare numeric dental anomaly characterized by congenital missing teeth and supernumerary teeth occurring in the same individual. Due to its rarity and sporadicity, the causes of CHH have been completely unknown. Detailed characterization and presentation of more CHH cases not only strengthen clinical diagnosis and treatment for the patients but facilitate the search for etiological factors of the disorder. Materials and methods: From a pedodontic patient population, 21 CHH subjects, with a mean age of 6 years 10 months, were identified and characterized. Dental records and radiographs were scrutinized and analyzed for the distribution and frequencies of involved teeth and concurrent dental anomalies. Through further literature review, 59 CHH cases with supernumeraries in the premaxillary region were retrieved for comparative analyses. Results: The boys were affected twice as often as the girls. While most cases were unrelated and sporadic, two sisters and a pair of identical twins from two unrelated families were presented. Of all cases, only one was of syndromic CHH carrying Duchenne muscular dystrophy. Bimaxillay CHH, with anomalies involving two jaws, occurred more than 4 times as often as maxillary CHH. While all supernumeraries were found in premaxillary region, hypodontia frequently involved lateral incisors and premolars of both jaws. Conclusion: As genetic contribution to CHH is strongly suggested by its familial occurrence and syndromic cases, environmental factors seem to play certain roles in modifying disease phenotypes. Judicious use of radiographs during early mixed dentition stage enhances clinical diagnosis and treatment of CHH. Keywords: Tooth agenesis, Supernumerary, Numeric anomaly, Premaxillary

Roentgenologic investigations for the anterior tooth length

Energy Technology Data Exchange (ETDEWEB)

Cho, Won Pyo; Ahn, Hyung Kyu [College of Dentistry, Seoul National University , Seoul (Korea, Republic of)

1972-11-15

The author measured the length of crown, root and tooth on the films which was taken by intraoral bisecting technic with mesh plate on the films. The films were taken from the dry skulls, dentiform, same patients who had to be removed their upper incisors, and the other patients who admitted for dental care. From this serial experiment the results were made as follows: 1. By using the film and mesh plate in the oral cavity, the real tooth length can be measured easily on the film surfaces. 2. The film distortion in the oral cavity can be avoided when taking the film using the mesh plate and film together. 3. When measuring the film, length of crown was elongated and length of root was shortened. 4. When using the well-trained bisecting technic, the real tooth length can be measured directly on the intraoral film.

Relationship between human tooth enamel free radical concentration and radiation dose

International Nuclear Information System (INIS)

Zhou Yongzeng; Wang Jiadong; Jia Xiaomei; Wu Ke; Cong Jianbo; Sun Cunpu

1999-01-01

Free radical concentrations of 25 adult tooth enamel samples were measured by electron spin resonance (ESR) technique in this paper, and the relationship between free radical concentration of tooth enamel and radiation dose was also investigated. In the 25 adult enamel samples they are 16 male samples and 9 female samples, Ages of tooth donors range from 18-41 years. Difference in background ESR signal intensity between male and female samples was no observed; free radical concentration (or increment of radiation-induced free radical concentration) in tooth enamel increases linearly with increasing of radiation dose. In the case of radiation accident, the study results of this paper could be applied to dose estimation when conditions of ESR measurement of exposed individual tooth enamel are similar to measurement conditions of dose-effect calibration curve in this paper

Australian aboriginal tooth succession, interproximal attrition, and Begg's theory.

Science.gov (United States)

Corruccini, R S

1990-04-01

In 1954, P.R. Begg analyzed interproximal attrition as a prehistorically universal mechanism to reduce tooth size. With modern processed diets and the virtual disappearance of constant interproximal attrition, Begg asserted, teeth remain too large for the arches and become crowded. Later investigators have questioned Begg's estimate of attritional tooth-size reduction, as well as aspects of his theory relating the succession sequence of permanent teeth to different malocclusions. The present paper examines the theory using longitudinal casts and records of modern Australian aborigines who are among the first generation lacking notable interproximal attrition thanks to a "modernized" diet. Deciduous and permanent tooth size, arch size, and occlusal relational variables were analyzed with respect to the expected occlusal outcomes in the absence of attritional tooth reduction. Permanent incisor overjet correlated with crowding status, as predicted by Begg. On the other hand, longer teeth did not relate to crowding in general nor to crowding in relevant local areas or during developmental stages. Unfavorable leeway space did not relate clearly to crowding or other malocclusions. Lowered correlations among structures and narrowness of the maxilla related more significantly to malocclusion. These results are in keeping with recent thinking that small jaws rather than large teeth underlie tooth/arch discrepancy.

Nutritional status, tooth wear and quality of life in Brazilian schoolchildren.

Science.gov (United States)

Andrade, Francisco Juliherme Pires de; Sales-Peres, André de Carvalho; Moura-Grec, Patricia Garcia de; Mapengo, Marta Artemisa Abel; Sales-Peres, Arsenio; Sales-Peres, Sílvia Helena de Carvalho

2016-06-01

To evaluate the correlation among nutritional status, tooth wear and quality of life in Brazilian schoolchildren. The study followed a cross-sectional design. Nutritional status was measured via anthropometry using BMI and tooth wear was measured using the Dental Wear Index; both these assessments were carried out by a trained recorder according to standard criteria. A modified version of the Child Oral Impacts on Daily Performances was used to assess quality of life. City of Bauru, in Brazil. A cluster sample of 396 schoolchildren (194 boys and 202 girls) aged 7-10 years. The anthropometric assessment showed similar situations for both sexes regarding underweight (31·40 % in boys and 30·20 % in girls) and overweight/obesity (33·96 % in boys and 33·17 % in girls). The underweight children showed a greater severity of tooth wear in the primary teeth (OR=0·72; CI 0·36, 1·42), although in the permanent dentition the obese children had a greater severity of tooth wear (OR=1·42; 95 % CI 0·31, 6·55). The tooth wear was correlated with age for both dentitions. Tooth wear in the primary and permanent dentition may be related to nutritional status. Tooth wear and obesity did not have a significant impact on the schoolchildren's perception of quality of life.

Anomalies of tooth formation in hypohidrotic ectodermal dysplasia

DEFF Research Database (Denmark)

Lexner, Michala O; Bardow, Allan; Hertz, Jens Michael

2007-01-01

OBJECTIVE: The X-linked hypohidrotic ectodermal dysplasia (HED) is the most common type of ectodermal dysplasia. The clinical identification of possible heterozygous females can be difficult because of the varying degrees of clinical signs caused by X-chromosome inactivation. This study is the fi......OBJECTIVE: The X-linked hypohidrotic ectodermal dysplasia (HED) is the most common type of ectodermal dysplasia. The clinical identification of possible heterozygous females can be difficult because of the varying degrees of clinical signs caused by X-chromosome inactivation. This study...... affected males had multiple missing permanent teeth and tooth malformations. The heterozygous females had a significantly higher frequency of agenesis of permanent teeth compared to normative data. The heterozygous females had an increased prevalence of tooth malformations and reduced tooth size...

Jaw lesions associated with impacted tooth: A radiographic diagnostic guide

Energy Technology Data Exchange (ETDEWEB)

Motazavi, Hamed; Bharvand, Maryam [Dept. of Oral Medicine, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran (Iran, Islamic Republic of)

2016-09-15

This review article aimed to introduce a category of jaw lesions associated with impacted tooth. General search engines and specialized databases such as Google Scholar, PubMed, PubMed Central, MedLine Plus, Science Direct, Scopus, and well-recognized textbooks were used to find relevant studies using keywords such as 'jaw lesion', 'jaw disease', 'impacted tooth', and 'unerupted tooth'. More than 250 articles were found, of which approximately 80 were broadly relevant to the topic. We ultimately included 47 articles that were closely related to the topic of interest. When the relevant data were compiled, the following 10 lesions were identified as having a relationship with impacted tooth: dentigerous cysts, calcifying odontogenic cysts, unicystic (mural) ameloblastomas, ameloblastomas, ameloblastic fibromas, adenomatoid odontogenic tumors, keratocystic odontogenic tumors, calcifying epithelial odontogenic tumors, ameloblastic fibro-odontomas, and odontomas. When clinicians encounter a lesion associated with an impacted tooth, they should first consider these entities in the differential diagnosis. This will help dental practitioners make more accurate diagnoses and develop better treatment plans based on patients' radiographs.

Efficacy of tooth whitening with different calcium phosphate-based formulations.

Science.gov (United States)

Jin, Jian; Xu, Xiaohui; Lai, Guangyun; Kunzelmann, Karl-Heinz

2013-08-01

The aim of this in-vitro study was to evaluate the efficacy of tooth whitening using different calcium phosphate-based formulations. Teeth were treated with three different hydroxyapatite preparations at different concentrations and with two control preparations; each tooth was treated a total of three times. After application of the last material, hydrodynamic shear force was applied to mimic mechanical loading. After each treatment, tooth color was measured using a dental spectrophotometer, and the mean changes in L*a*b* values between different measurements were expressed as ∆E. The results indicated significant differences between the materials, but neither dose- nor time-dependent associations were found. The suspension containing tricalcium phosphate (10 wt%) showed the most obvious color change (∆E = 2.20 ± 0.90), while the suspension containing zinc-carbonate-apatite (20 wt%) showed the least obvious color change (∆E = 0.91 ± 0.50). Calcium phosphate-based formulations that can adhere to the enamel surface and contribute to tooth whitening have promising tooth-whitening potential. © 2013 Eur J Oral Sci.

Jaw lesions associated with impacted tooth: A radiographic diagnostic guide

International Nuclear Information System (INIS)

Motazavi, Hamed; Bharvand, Maryam

2016-01-01

This review article aimed to introduce a category of jaw lesions associated with impacted tooth. General search engines and specialized databases such as Google Scholar, PubMed, PubMed Central, MedLine Plus, Science Direct, Scopus, and well-recognized textbooks were used to find relevant studies using keywords such as 'jaw lesion', 'jaw disease', 'impacted tooth', and 'unerupted tooth'. More than 250 articles were found, of which approximately 80 were broadly relevant to the topic. We ultimately included 47 articles that were closely related to the topic of interest. When the relevant data were compiled, the following 10 lesions were identified as having a relationship with impacted tooth: dentigerous cysts, calcifying odontogenic cysts, unicystic (mural) ameloblastomas, ameloblastomas, ameloblastic fibromas, adenomatoid odontogenic tumors, keratocystic odontogenic tumors, calcifying epithelial odontogenic tumors, ameloblastic fibro-odontomas, and odontomas. When clinicians encounter a lesion associated with an impacted tooth, they should first consider these entities in the differential diagnosis. This will help dental practitioners make more accurate diagnoses and develop better treatment plans based on patients' radiographs

Nondestructive detection system of faults in fuses using radioisotope

International Nuclear Information System (INIS)

Goncalves, D.

1973-01-01

A system is developed to show the viability of non-destructive detection of the faults of explosive safety fuses which are manufactured by Fabrica da Estrela do Ministerio do Exercito. The faults are detected by an ion-chamber based on the variation of the intensity of the beta particles that penetrate the fuse which passes through a collimator. The beta particles are emitted by Strontium-90 + Yttrium-90 encapsulated in either stainless steel or aluminum. The concept of 'bucking Voltage' is applied to differentiate electronically the signal generated by the ion-chamber. (author)

Development of Plastic Gear for Power Transmission : Abnormal Wear on the Tooth Root and Tooth Fracture near Pitch Point

OpenAIRE

Terashima, Kenichi; Tsukamoto, Naohisa; Nishida, Noriteru; Shi, Jiasun

1986-01-01

Plastic gears have many excellent characteristics which are locking in metallic gears, such as corrosion resistance, self-lubrication, quiet running, and so forth. The meshing behavior of plastic gears is very different from that of metallic gears. Therefore, the life estimation is very difficult for plastic gears. In this paper, generating and growing mechanisms of abnormal wear which appears fatally near the root of plastic tooth are analyzed, and then it is clarified that tooth fractures w...

Unexpected structural complexity of supernumerary marker chromosomes characterized by microarray comparative genomic hybridization

Directory of Open Access Journals (Sweden)

Hing Anne V

2008-04-01

Full Text Available Abstract Background Supernumerary marker chromosomes (SMCs are structurally abnormal extra chromosomes that cannot be unambiguously identified by conventional banding techniques. In the past, SMCs have been characterized using a variety of different molecular cytogenetic techniques. Although these techniques can sometimes identify the chromosome of origin of SMCs, they are cumbersome to perform and are not available in many clinical cytogenetic laboratories. Furthermore, they cannot precisely determine the region or breakpoints of the chromosome(s involved. In this study, we describe four patients who possess one or more SMCs (a total of eight SMCs in all four patients that were characterized by microarray comparative genomic hybridization (array CGH. Results In at least one SMC from all four patients, array CGH uncovered unexpected complexity, in the form of complex rearrangements, that could have gone undetected using other molecular cytogenetic techniques. Although array CGH accurately defined the chromosome content of all but two minute SMCs, fluorescence in situ hybridization was necessary to determine the structure of the markers. Conclusion The increasing use of array CGH in clinical cytogenetic laboratories will provide an efficient method for more comprehensive characterization of SMCs. Improved SMC characterization, facilitated by array CGH, will allow for more accurate SMC/phenotype correlation.

Measurements of fuse and resistor characteristics for multi-megajoule capacitor bank application

International Nuclear Information System (INIS)

McDonald, K.F.; Smith, T.; Golden, J.; Conley, B.

1986-01-01

Experimental tests have been conducted on commercially available fuses and resistors under fast high voltage pulsed (10 μsec) conditions to determine their ability to protect capacitor bank components during faults. NRL's Modified Betatron Accelerator uses two multi-megajoule capacitor banks to power the toroidal and betatron magnetic field coils. The expensive high energy density capacitors in these banks must be protected from excessive peak current, voltage reversal, or charging beyond their electrical ratings in the occurrence of a fault. Adequate protection can be obtained with fuses and resistors in series with each parallel connected capacitor. The fuses must open reliably and hold off high voltage D.C. (10 - 20 kV), and the resistors must conduct high current and di/dt without failing from energy deposition or magnetic forces. The performance of the commercial fuses is well documented at low AC frequencies and currents (60 Hz/100 A) but data was not previously available for the fast high current pulsed conditions that prevail under actual fault conditions. A 20 kV 200 kJ, low inductance capacitor bank and ignitron switch were used to conduct the experiments. Peak currents in the fuses were approximately 170 kA at t - 6.5 μs. The final fuse hold-off voltage exceeded 8 kV. Currents in the resistors ranged from - 20 - 40 kA per resistor. The experimental results have been compared to the manufacturers data from minimum melt and maximum let-through and to exploding bridge wire computer models

30 CFR 75.601-3 - Short circuit protection; dual element fuses; current ratings; maximum values.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Short circuit protection; dual element fuses... Trailing Cables § 75.601-3 Short circuit protection; dual element fuses; current ratings; maximum values. Dual element fuses having adequate current-interrupting capacity shall meet the requirements for short...

A comparison of new and conventional methods for quantification of tooth color

NARCIS (Netherlands)

Burgt, van der T.P.; Bosch, ten J.J.; Borsboom, P.C.F.; Kortsmit, W.J.P.M.

1990-01-01

Tooth color is caused by volume reflection, that is, passage of incident light through the tooth followed by backward emergence. This passage is concurrent with sideward displacement of photons that, in effect, influences the result of usual instrumental methods of determining tooth color. This

SIGNS Molar tooth sign − looking beyond the obvious

African Journals Online (AJOL)

tooth are represented by thick, perpendicular, non-decussated superior cerebellar peduncles, while the 'body' of the molar tooth is formed by the cerebral peduncles of the brainstem with a deep interpeduncular fossa (Fig. 1a).[3]. Diffusion tensor tractography confirms the failure of superior cerebellar peduncle decussation.

Complex dental anomalies in a belatedly diagnosed cleidocranial dysplasia patient

International Nuclear Information System (INIS)

Lu, Hui; Zeng, Bing Hui; Yu, Dong Sheng; Jing, Xiang Yi; Hu, Bin; Zhao, Wei; Wang, Yi Ming

2015-01-01

Cleidocranial dysplasia (CCD) is a rare congenital disorder, typically characterized by persistently open skull sutures, aplastic or hypoplastic clavicles, and supernumerary teeth. Mutations in the gene encoding the runt-related transcription factor 2 (RUNX2) protein are responsible for approximately two thirds of CCD patients. We report a 20-year-old CCD patient presenting not only with typical skeletal changes, but also complex dental anomalies. A previously undiagnosed odontoma, 14 supernumerary teeth, a cystic lesion, and previously unreported fused primary teeth were discovered on cone-beam computed tomography (CBCT) scans. Mutation analysis identified the causal c.578G>A (p.R193Q) mutation in the RUNX2 gene. At 20 years of age, the patient had already missed the optimal period for dental intervention. This report describes the complex dental anomalies in a belatedly diagnosed CCD patient, and emphasizes the significance of CBCT assessment for the detection of dental anomalies and the importance of early treatment to achieve good outcomes

Complex dental anomalies in a belatedly diagnosed cleidocranial dysplasia patient

Energy Technology Data Exchange (ETDEWEB)

Lu, Hui; Zeng, Bing Hui; Yu, Dong Sheng; Jing, Xiang Yi; Hu, Bin; Zhao, Wei; Wang, Yi Ming [Sun Yat-Sen University, Guangzhou (China)

2015-09-15

Cleidocranial dysplasia (CCD) is a rare congenital disorder, typically characterized by persistently open skull sutures, aplastic or hypoplastic clavicles, and supernumerary teeth. Mutations in the gene encoding the runt-related transcription factor 2 (RUNX2) protein are responsible for approximately two thirds of CCD patients. We report a 20-year-old CCD patient presenting not only with typical skeletal changes, but also complex dental anomalies. A previously undiagnosed odontoma, 14 supernumerary teeth, a cystic lesion, and previously unreported fused primary teeth were discovered on cone-beam computed tomography (CBCT) scans. Mutation analysis identified the causal c.578G>A (p.R193Q) mutation in the RUNX2 gene. At 20 years of age, the patient had already missed the optimal period for dental intervention. This report describes the complex dental anomalies in a belatedly diagnosed CCD patient, and emphasizes the significance of CBCT assessment for the detection of dental anomalies and the importance of early treatment to achieve good outcomes.

Anthracene-fused BODIPYs as near-infrared dyes with high photostability

KAUST Repository

Zeng, Lintao; Jiao, Chongjun; Huang, Xiaobo; Huang, Kuo-Wei; Chin, Weeshong; Wu, Jishan

2011-01-01

An anthracene unit was successfully fused to the zigzag edge of a boron dipyrromethene (BODIPY) core by an FeCl 3-mediated oxidative cyclodehydrogenation reaction. Meanwhile, a dimer was also formed by both intramolecular cyclization and intermolecular coupling. The anthracene-fused BODIPY monomer 7a and dimer 7b showed small energy gaps (∼1.4 eV) and near-infrared absorption/emission. Moreover, they exhibited high photostability. © 2011 American Chemical Society.

Anthracene-fused BODIPYs as near-infrared dyes with high photostability

KAUST Repository

Zeng, Lintao

2011-11-18

An anthracene unit was successfully fused to the zigzag edge of a boron dipyrromethene (BODIPY) core by an FeCl 3-mediated oxidative cyclodehydrogenation reaction. Meanwhile, a dimer was also formed by both intramolecular cyclization and intermolecular coupling. The anthracene-fused BODIPY monomer 7a and dimer 7b showed small energy gaps (∼1.4 eV) and near-infrared absorption/emission. Moreover, they exhibited high photostability. © 2011 American Chemical Society.

Geographic Variations in the EPR Spectrum of Tooth Enamel

International Nuclear Information System (INIS)

Romanyukha, A.A.; Hayes, R.B.; Haskell, E.H.; Kenner, G.H.

1999-01-01

The presence of stable radiation-induced radicals in the mineral component of tooth enamel allows use of this material as a biological dosemeter. Estimation of the dose absorbed in tooth enamel can be done by EPR. Generally, for the purpose of dose reconstruction, the EPR spectrum of tooth enamel is interpreted in terms of two main components. The first is a broad background signal often called the native signal centered at a g value of 2.0045. The origin of this signal is not precisely known. The second main component in the tooth enamel spectrum is purely radiation induced and can be used for retrospective dosimetry. Internal structure of the native signal and variations of its amplitude and linewidth were investigated for the samples prepared from modern teeth obtained from different geographic locations (USA and Russia). Possible reasons for the variations observed are discussed as are the potential effects of the variations on the reliability of dose estimation. (author)

Treatment of Necrotic Calcified Tooth Using Intentional Replantation Procedure

Directory of Open Access Journals (Sweden)

Nima Moradi Majd

2014-01-01

Full Text Available Introduction. If the teeth are impacted by a chronic irritant, the pulp space possibly will undergo calcific changes that may impede access opening during root canal treatment. In such cases that conventional endodontic treatment is impossible or impractical, intentional replantation may be considered as a last solution to preserve the tooth. Methods. After failing to perform conventional root canal therapy for a necrotic calcified right mandibular second premolar, the tooth was gently extracted. The root apex was resected and the root end cavity was prepared and filled with calcium enriched mixture (CEM cement. Then, the extracted tooth was replanted in its original position. Results. After a year the tooth was asymptomatic, and the size of periapical radiolucency was remarkably reduced and no clinical sign of ankylosis was observed. Conclusion. Intentional replantation of the necrotic calcified teeth could be considered as an alternative to teeth extraction, especially for the single-rooted teeth and when nonsurgical and surgical endodontic procedures seem impossible.

30 CFR 75.601-2 - Short circuit protection; use of fuses; approval by the Secretary.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Short circuit protection; use of fuses... Trailing Cables § 75.601-2 Short circuit protection; use of fuses; approval by the Secretary. Fuses shall not be employed to provide short circuit protection for trailing cables unless specifically approved...

Tooth wear risk assessment and care-planning in general dental practice.

Science.gov (United States)

O'Toole, S; Khan, M; Patel, A; Patel, N J; Shah, N; Bartlett, D; Movahedi, S

2018-03-09

Objective To assess charting, risk assessment and treatment-planning of tooth wear between recently qualified and experienced dentists in general dental practice.Design Service evaluation.Setting Multi-setting evaluation of three mixed NHS/Private general dental practices in North-East London.Methods The clinical notes of new patient examinations on dentate adults presenting from the 1 October 2016 to 31 December 2016 were audited collecting data on tooth wear charting, risk assessment and treatment planning. Data were analysed using descriptives, chi square and logistic regressions in SPSS. Significance was inferred at p charted for 48% of those attending foundation dentists and 5% of those attending experienced dentists. Diet was assessed in 50.6% of patients examined by foundation dentists and 1.0% of patients examined by experienced dentists. Foundation dentists were more likely to chart tooth wear, risk assess and preventively manage tooth wear compared to experienced dentists (p <0.001).Conclusion This service evaluation highlights that improvements are required in recording, risk assessing and preventive treatment planning of erosive tooth wear. Experienced dentists were less likely to risk assess tooth wear and less likely to provide preventive treatment. Experienced GDPs may benefit from re-training in this area.

Camel molar tooth enamel response to gamma rays using EPR spectroscopy.

Science.gov (United States)

El-Faramawy, N A; El-Somany, I; Mansour, A; Maghraby, A M; Eissa, H; Wieser, A

2018-03-01

Tooth enamel samples from molar teeth of camel were prepared using a combined procedure of mechanical and chemical tooth treatment. Based on electron paramagnetic resonance (EPR) spectroscopy, the dose response of tooth enamel samples was examined and compared to that of human enamel. The EPR dose response of the tooth enamel samples was obtained through irradiation to gamma doses from 1 Gy up to 100 kGy. It was found that the radiation-induced EPR signal increased linearly with gamma dose for all studied tooth enamel samples, up to about 15 kGy. At higher doses, the dose response curve leveled off. The results revealed that the location of the native signal of camel tooth enamel was similar to that of enamel from human molars at 2.00644, but different from that of enamel from cows and goats. In addition, the peak-to-peak width (ΔH pp ) for human and camel molar teeth was similar. It was also found that the response of camel enamel to gamma radiation was 36% lower than that of human enamel. In conclusion, the results indicate the suitability of camel teeth for retrospective gamma dosimetry.

Camel molar tooth enamel response to gamma rays using EPR spectroscopy

Energy Technology Data Exchange (ETDEWEB)

El-Faramawy, N.A.; El-Somany, I. [Ain Shams University, Physics Department, Faculty of Science, Cairo (Egypt); Mansour, A. [National Center for Radiation Research and Technology, Atomic Energy Authority, Cairo (Egypt); Maghraby, A.M.; Eissa, H. [National Institute of Standards (NIS), Ionizing Radiation Metrology Laboratory, Giza (Egypt); Wieser, A. [Helmholtz Zentrum Muenchen-German Research Center for Environmental Health, Department of Radiation Sciences, Institute of Radiation Protection, Neuherberg (Germany)

2018-03-15

Tooth enamel samples from molar teeth of camel were prepared using a combined procedure of mechanical and chemical tooth treatment. Based on electron paramagnetic resonance (EPR) spectroscopy, the dose response of tooth enamel samples was examined and compared to that of human enamel. The EPR dose response of the tooth enamel samples was obtained through irradiation to gamma doses from 1 Gy up to 100 kGy. It was found that the radiation-induced EPR signal increased linearly with gamma dose for all studied tooth enamel samples, up to about 15 kGy. At higher doses, the dose response curve leveled off. The results revealed that the location of the native signal of camel tooth enamel was similar to that of enamel from human molars at 2.00644, but different from that of enamel from cows and goats. In addition, the peak-to-peak width (ΔH{sub pp}) for human and camel molar teeth was similar. It was also found that the response of camel enamel to gamma radiation was 36% lower than that of human enamel. In conclusion, the results indicate the suitability of camel teeth for retrospective gamma dosimetry. (orig.)

Two uncommon uses of Bio-Oss for GTR and ridge augmentation following extractions: two case reports.

Science.gov (United States)

Pripatnanont, Prisana; Nuntanaranont, Thongchai; Chungpanich, Supis

2002-06-01

Bio-Oss is natural bovine bone mineral, which has the property of bone conduction. It is recommended to be used in two- or three-walled bony defects with an ample supply of pleuripotential cells. Two cases are reported. The first was an intentional replantation, because of previous trauma, of a hopeless tooth affected with severe periodontitis. The tooth was replanted after complete elimination of granulation tissue. Bio-Oss, together with a guided tissue regeneration (GTR) membrane, was used to enhance periodontal regeneration. After 2 years of follow-up, the replanted tooth was quite stable. In the second case, Bio-Oss, together with bone taken from the retromolar area, was used in a sinus lift grafting procedure after the removal of two supernumerary teeth from the floor of the maxillary sinus. Four months after grafting, an orthodontic treatment was applied to move the two adjacent teeth through the grafted site and align them in the proper position. The clinical results of the two cases were satisfactory.

Metabolism in tooth enamel and reliability of retrospective EPR dosimetry connected with Chernobyl accident

International Nuclear Information System (INIS)

Brik, A.; Radchuk, V.; Scherbina, O.; Matyash, M.; Gaver, O.

1996-01-01

It is shown that the results of retrospective EPR dosimetry by tooth enamel are essentially determined by the fact that tooth enamel is the mineral of biological origin. The structure of tooth enamel, properties of radiation defects and the role of metabolism in tooth enamel are discussed. It is shown that at deep metamorphic modifications tooth enamel don't save information about its radiation history. The reliability and accuracy of retrospective EPR dosimetry are discussed. Because after Chernobyl accident have passed 10 years the application of tooth enamel for reconstruction of doses which are connected with Chernobyl accident need care and additional investigations

Accuracy and precision of estimating age of gray wolves by tooth wear

Science.gov (United States)

Gipson, P.S.; Ballard, W.B.; Nowak, R.M.; Mech, L.D.

2000-01-01

We evaluated the accuracy and precision of tooth wear for aging gray wolves (Canis lupus) from Alaska, Minnesota, and Ontario based on 47 known-age or known-minimum-age skulls. Estimates of age using tooth wear and a commercial cementum annuli-aging service were useful for wolves up to 14 years old. The precision of estimates from cementum annuli was greater than estimates from tooth wear, but tooth wear estimates are more applicable in the field. We tended to overestimate age by 1-2 years and occasionally by 3 or 4 years. The commercial service aged young wolves with cementum annuli to within ?? 1 year of actual age, but under estimated ages of wolves ???9 years old by 1-3 years. No differences were detected in tooth wear patterns for wild wolves from Alaska, Minnesota, and Ontario, nor between captive and wild wolves. Tooth wear was not appropriate for aging wolves with an underbite that prevented normal wear or severely broken and missing teeth.

The role of Msx1 and Pax9 in pathogenetic mechanisms of tooth agenesis

Directory of Open Access Journals (Sweden)

Yani Corvianindya Rahayu

2009-09-01

Full Text Available Background: Tooth agenesis is one of the most common developmental anomalies in human, which one or a few teeth are absent because they have never formed, may cause cosmetic or occlusal harm, while severe agenesis which are relatively rare require clinical attention to support and maintain the dental function. Molecular studies have demonstrated that tooth development is under strict genetic control. Purpose: This article want to review the genetic regulating that are responsible for tooth agenesis especially the role of Msx1 and Pax9 in pathogenetic mechanisms of tooth agenesis. Review: Tooth agenesis is a consequence of a qualitatively or quantitatively impaired function of genetic networks, which regulate tooth development. Mutations in Msx1 and Pax9 genes are dominant for tooth agenesis in humans. The Pax9 gene, which codes for a paired domain-containing transcription factor that plays an essential role in the development of mammal dentition, has been associated with selective tooth agenesis in humans and mice. Conclusion: Reduced amount of functional Msx1 or Pax9 protein in the tooth forming cells is able to cause severe and selective tooth agenesis. There are differences in the frequency of agenesis of specific teeth associated with the defects in Msx1 and defects in Pax9.

Anthropology, tooth wear, and occlusion ab origine.

Science.gov (United States)

Young, W G

1998-11-01

The purpose of this essay is to emphasize that anthropology, the study of man in his environments, is a potent tool for scientific discovery and inspiration in dental science. It attempts to capture flashes of creative anthropological insight which have illuminated studies of tooth wear and occlusion in the past. While it documents contributions, understandings, and misunderstandings from Australian and New Zealand dentists, it is not a hagiography. The real saint of this essay is the Australian aborigine. For when men and women are understood in their environments, much is learned from them which challenges preconceptions of our dental science culture. The essay concludes that new, contemporary Australian culture needs to be studied by anthropological approaches if we are to understand how dental erosion is exacerbating tooth wear and damaging the occlusions of contemporary Australians. Much remains to be discovered about contemporary lifestyles, habits, and diets that lead to dental erosion, the principal cause of contemporary tooth wear in this part of the world.

Computer-Assisted Technique for Surgical Tooth Extraction

Directory of Open Access Journals (Sweden)

Hosamuddin Hamza

2016-01-01

Full Text Available Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut. Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome. In addition, the conventional surgical cutting tools (surgical burs are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures.

Effect of drugs on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Siti Sarah Aulia Amrullah

2016-06-01

Full Text Available Orthodontic tooth movement is basically a biological response to mechanical forces given to the teeth in orthodontic treatment, which involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structure. Remodeling changes in periodontal tissues are considered to be essential in effecting orthodontic tooth movement which is the base of orthodontic correction. Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can influence mechanically stressed periodontal tissue through the circulation and interact with target cell combination of which may be inhibitory, additive or synergize. Medications might have an important influence on the rate of tooth movement, and information on their consumption is essential to adequately discuss treatment planning with patients. Therefore it is imperative to the practitioners being in medical profession, must pay close attention to the drug consumption history of every patient before and during the course of treatment.

Pre-existing Periapical Inflammatory Condition Exacerbates Tooth Extraction–induced BRONJ Lesions in Mice

Science.gov (United States)

Song, Minju; Alshaikh, Abdullah; Kim, Terresa; Kim, Sol; Dang, Michelle; Mehrazarin, Shebli; Shin, Ki-Hyuk; Kang, Mo; Park, No-Hee; Kim, Reuben H.

2016-01-01

Introduction Surgical interventions such as tooth extraction increase a chance of developing osteonecrosis of the jaw (ONJ) in patients receiving bisphosphonates (BPs) for treatment of bone-related diseases. Tooth extraction is often performed to eliminate pre-existing pathological inflammatory conditions that make the tooth unsalvageable; however, the role of such conditions on bisphosphonate-related ONJ (BRONJ) development following tooth extraction is not clearly defined. Here, we examined the effects of periapical periodontitis on tooth extraction-induced BRONJ development in mice. Methods Periapical periodontitis was induced by exposing the pulp of the maxillary first molar for 3 weeks in C57/BL6 mice that were intravenously administered with BP. The same tooth was extracted, and after 3 additional weeks, the mice were harvested for histological, histomorphometric, and histochemical staining analyses. Results Pulp exposure induced periapical radiolucency as demonstrated by increased inflammatory cells, TRAP+ osteoclasts, and bone resorption. When BP was administered, pulp exposure did not induce apical bone resorption despite the presence of inflammatory cells and TRAP+ osteoclasts. While tooth extraction alone induced BRONJ lesions, pulp exposure further increased tooth extraction-induced BRONJ development as demonstrated by the presence of more bone necrosis. Conclusion Our study demonstrates that pre-existing pathological inflammatory condition such as periapical periodontitis is a predisposing factor that may exacerbate BRONJ development following tooth extraction. Our study further provides a clinical implication whereby periapical periodontitis should be controlled before performing tooth extraction in BP-users in order to reduce the risk of developing BRONJ. PMID:27637460

Experience of racism and tooth brushing among pregnant Aboriginal Australians: exploring psychosocial mediators.

Science.gov (United States)

Ben, J; Jamieson, L M; Priest, N; Parker, E J; Roberts-Thomson, K F; Lawrence, H P; Broughton, J; Paradies, Y

2014-09-01

Despite burgeoning evidence regarding the pathways by which experiences of racism influence health outcomes, little attention has been paid to the relationship between racism and oral health-related behaviours in particular. We hypothesised that self-reported racism was associated with tooth brushing, and that this association was mediated by perceived stress and sense of control and moderated by social support. Data from 365 pregnant Aboriginal Australian women were used to evaluate tooth brushing behaviour, sociodemographic factors, psychosocial factors, general health, risk behaviours and racism exposure. Bivariate associations were explored and hierarchical logistic regression models estimated odds ratios (OR) and 95% confidence intervals (CI) for tooth brushing. Perceived stress and sense of control were examined as mediators of the association between self-reported racism and tooth brushing using binary mediation with bootstrapping. High levels of self-reported racism persisted as a risk indicator for tooth brushing (OR 0.51, 95%CI 0.27,0.98) after controlling for significant covariates. Perceived stress mediated the relationship between self-reported racism and tooth brushing: the direct effect of racism on tooth brushing was attenuated, and the indirect effect on tooth brushing was significant (beta coefficient -0.09; bias-corrected 95%CI -0.166,-0.028; 48.1% of effect mediated). Sense of control was insignificant as a mediator of the relationship between racism and tooth brushing. High levels of self-reported racism were associated with non-optimal tooth brushing behaviours, and perceived stress mediated this association among this sample of pregnant Aboriginal women.. Limitations and implications are discussed.

Treatment of a horizontal root-fractured tooth with decoronation procedure: case report

Directory of Open Access Journals (Sweden)

Selen Esin Yoldaş

2016-05-01

Full Text Available INTRODUCTION: Early loss of permanent anterior teeth due to trauma can cause esthetic and functional problems for young patients. In such cases, replacement of the missing tooth with traditional approaches is possible; however such approaches will reduce the chance of the patient to receive an esthetic and consistent treatment in the future. CASE REPORT: A 12-year-old male patient referred to our clinic with a history of trauma. Complicated crown fracture in tooth no.11 and horizontal root fracture in tooth no. 21 was detected. Following root canal treatment, tooth no. 11 was restored with a fiber post and a strip crown. To avoid alveolar bone loss due to early tooth extraction, decoronation procedure, an alternative approach, was applied to tooth no. 21. This procedure consisted of leaving the root fragment inside the alveolar socket following the removal of the crown. For the rehabilitation of the missing crown, a partial removable prosthesis was implemented. The patient was recalled in 6., 12. and 18. months. Within the follow-up period, no reduction in the alveolar bone level was seen. No sign of infection was evident. The remaining root fragment kept on resorbing. Tooth no. 11 remained symptom-free as well. The patient is still being followed. CONCLUSION: Decoronation is essentially a treatment choice for preventing alveolar bone loss in ankylosed teeth considered for extraction. In this case report, decoronation was shown to be a suitable alternative also for a fractured, non-ankylosed tooth.

Crossed fused renal ectopia: Challenges in diagnosis and management

Directory of Open Access Journals (Sweden)

Shailesh Solanki

2013-01-01

Full Text Available Aim: Crossed fused renal ectopia is a rare congenital malformation, which is reported to be usually asymptomatic but may have varied presentations. This survey was conducted to study the clinical profile and the challenges posed in the management of this entity. Materials and Methods: Retrospective analysis of 6 patients diagnosed to have crossed fused renal ectopia during 1997-2010. The diagnosis was confirmed during surgical exploration in one patient. In one patient it was detected on antenatal ultrasonography and in the other 4 patients it was detected during investigations for abdominal pain, abdominal mass, anorectal malformation and urinary tract infection. Results: The left moiety was crossed and fused with the right moiety in 4 cases. Ultrasonography was found to be a good screening investigation with useful diagnostic contributions from CT scans, radionuclide scintigraphy and magnetic resonance urography. Micturating cystourethrography revealed presence of VUR in 4 cases, 3 of whom have undergone ureteric reimplantation. Two patients required pyeloplasty for pelviureteric junction obstruction; in one of these patients the upper ureter was entrapped in the isthmus. In one patient, a non-functioning moiety resulted in nephrectomy. All children were asymptomatic at last follow-up with stable renal functions. Conclusions: Crossed fused renal ectopia was detected in most patients during investigation for other problems. It was found more commonly in boys. The left moiety was crossed to the right in the majority of cases. Associated urological problems were found in most cases and required the appropriate surgical management.

Erosive and Mechanical Tooth Wear in Viking Age Icelanders.

Science.gov (United States)

Richter, Svend; Eliasson, Sigfus Thor

2017-08-29

(1) Background: The importance of the Icelandic Sagas as a source of information about diet habits in medieval Iceland, and possibly other Nordic countries, is obvious. Extensive tooth wear in archaeological material worldwide has revealed that the main cause of this wear is believed to have been a coarse diet. Near the volcano Hekla, 66 skeletons dated from before 1104 were excavated, and 49 skulls could be evaluated for tooth wear. The purpose of this study was to determine the main causes of tooth wear in light of diet and beverage consumption described in the Sagas; (2) Materials and methods: Two methods were used to evaluate tooth wear and seven for age estimation; (3) Results: Extensive tooth wear was seen in all of the groups, increasing with age. The first molars had the highest score, with no difference between sexes. These had all the similarities seen in wear from a coarse diet, but also presented with characteristics that are seen in erosion in modern Icelanders, through consuming excessive amounts of soft drinks. According to the Sagas, acidic whey was a daily drink and was used for the preservation of food in Iceland, until fairly recently; (4) Conclusions: It is postulated that the consumption of acidic drinks and food, in addition to a coarse and rough diet, played a significant role in the dental wear seen in ancient Icelanders.

Tooth enamel as a naturtal beta dosemeter for bone seeking radionuclides

International Nuclear Information System (INIS)

Wieser, A.; Petzoldt, G.

1996-01-01

EPR dosimetry was done on teeth from residents of villages along the Techa river, Southern Urals, Russia. The residents have a 90 Sr body burden due to massive releases of liquid nuclear waste into the Techa river in the early fifties. A long time after ingestion, strontium is only incorporated into the skeleton and dentine of the adults but not in tooth enamel. Tooth enamel therefore, is measuring the beta dose from the contaminated dentine. Based on experimental data of this study a first approximation of the ingestion dose coefficient of tooth enamel was found to be more than 5 times lower than the value given in ICRP 69 for the bone surface of the skeleton. A similar difference was found earlier for the dose absorbed in tooth enamel and dentine. The result of this study allows the supposition that that the metabolism of strontium is very very similar for tooth dentine and the skeleton. (author)

Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

Science.gov (United States)

Dianiskova, Simona; Calzolari, Chiara; Migliorati, Marco; Silvestrini-Biavati, Armando; Isola, Gaetano; Savoldi, Fabio; Dalessandri, Domenico; Paganelli, Corrado

2016-01-01

The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of “a substantial risk for irreparable damage” from a new trend called “do-it-yourself” orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment. PMID:27672645

Management of Tooth Wear: A Holistic, Dental, Medical, and Mental Healthcare Approach.

Science.gov (United States)

Ahmed, Khaled E

2016-08-01

Tooth wear is a condition that affects a substantial cohort of dental patients. It has a measurable impact on patients' satisfaction, and overall quality of life. Recently, with growing evidence, our understanding of the aetiology, progression, and management of tooth wear has evolved. The paper argues that pathological tooth wear should not be solely considered as a dental condition, but rather a dental manifestation of other mental and medical disorders. As such, successful management of tooth wear, and its underlying aetiology, requires a holistic, multidisciplinary management approach, involving dental, medical, and mental healthcare providers.

Behavioral changes during dental appointments in children having tooth extractions

Directory of Open Access Journals (Sweden)

Mariana Gonzalez Cademartori

2017-01-01

Full Text Available Background: Tooth extractions are associated with anxiety-related situations that can cause behavioral problems in pediatric dental clinics. Aim: We aimed to describe the behavior of children during tooth extraction appointments, compare it to their behavior in preceding and subsequent dental appointments, and assess the behavioral differences according to gender, age, type of dentition, and reason for extraction. Settings and Design: This was a retrospective study based on information obtained from records of children between 6 and 13 years of age who were cared for at the Dentistry School in Pelotas, Brazil. Materials and Methods: Child behavior was assessed during the dental appointment that preceded the tooth extraction, during the tooth extraction appointment, and in the subsequent dental appointment using the Venham Behavior Rating Scale. Statistical Analysis: Results were analyzed using the Pearson Chi-square and McNemar tests. Results: Eighty-nine children were included. Cooperative behavior prevailed in all the dental appointments. The prevalence of “mild/intense protest” was higher in the tooth extraction appointments than in the previous or subsequent dental appointments (P < 0.001. No significant differences in behavior were detected between the type of dentition (primary or permanent teeth, reason for extraction or gender. Conclusion: In this sample of children treated at a dental school, the occurrence of uncooperative behavior was higher during the tooth extraction appointments than in the preceding and subsequent dental appointments.

Dose- and time-dependent effects of clodronate on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Enita Nakaš

2017-02-01

Full Text Available Orthodontic tooth movement is the result of bone remodeling that occurs in periodontal ligament and alveolar bone tissue as a response to mechanical loading of the tooth. The aim of this study is to investigate the time- and dose-response effects of locally administered clodronate on tooth movement. Sixty Wistar rats were randomly assigned to 4 groups of 15 specimens: E1 - application of 10 mMol of clodronate in 3-day intervals; E2 - application of 2.5 mMol of clodronate in 3-day intervals; E3 - application of 10 mMol of clodronate in 7-day intervals; E4 - application of 2.5 mMol of clodronate in 7-day intervals. A 50 μL clodronate solution was injected into a subperiosteal area to the right maxillary incisor. The left maxillary incisor served as a control, with an injection of saline solution. In 3-day interval application regime, there was no effect of clodronate dosing on tooth movement. In 7-day interval application regime, decreased tooth movement was observed with 10 mMol compared with 2.5 mMol clodronate concentration. However, decreased tooth movement was also observed when 2.5 mMol of clodronate was applied in 7-versus 3-day intervals. Conversely, no difference was observed when 10 mMol concentration was applied in 3- versus 7-day intervals. When clodronate is applied subperiosteally in the root area, it decreases the tooth movement. Tooth movement is impeded by the higher clodronate dosing, as well as by shorter application interval even with lower dosing. The purpose of future trials should, therefore, be to determine a safe therapeutic dose/interval application of clodronate in humans and their potential side effects.

[3D printing personalized implant manufactured via fused deposition modeling: an accuracy research].

Science.gov (United States)

Wang, Ning; Li, Jie; Wang, Xiaolong; Liu, Gang; Liu, Bin

2015-10-01

The aim of this study was to determine the accuracy of personalized implant fabricated via 3D printing and fused deposition modeling technique (FDM) and to compare the results with a real tooth. Six prepared extracted orthodontic teeth (in vivo) were scanned via cone beam computed tomography (CBCT) to obtain 3D data and to build the data models by using Mimics 15.0 software. The extracted orthodontic teeth (in vitro) and the personalized implants designed via 3D printing and FDM were scanned via CBCT to obtain data and to build the data models at the same parameters. The 3D deviations were compared among the in vivo teeth data models, in vitro teeth data models, and printing personalized implant data models by using the Geomagic studio software. The average deviations of high and low areas between date models of in vivo teeth and personalized implants were 0.19 mm and -0.16 mm, respectively, and the average deviations between in vitro and in vivo teeth were 0.14 mm and -0.07 mm, respectively. The independent t test showed that no statistically significant difference was observed between the two groups (P>0.05). 1) The personalized dental implants were manufactured via 3D printing and FDM with a high degree of precision. 2) Errors between the data models of in vitro and in vivo teeth were observed at the same CBCT parameters.

Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms

Directory of Open Access Journals (Sweden)

Evert Fuenmayor

2018-04-01

Full Text Available Material choice is a fundamental consideration when it comes to designing a solid dosage form. The matrix material will ultimately determine the rate of drug release since the physical properties (solubility, viscosity, and more of the material control both fluid ingress and disintegration of the dosage form. The bulk properties (powder flow, concentration, and more of the material should also be considered since these properties will influence the ability of the material to be successfully manufactured. Furthermore, there is a limited number of approved materials for the production of solid dosage forms. The present study details the complications that can arise when adopting pharmaceutical grade polymers for fused-filament fabrication in the production of oral tablets. The paper also presents ways to overcome each issue. Fused-filament fabrication is a hot-melt extrusion-based 3D printing process. The paper describes the problems encountered in fused-filament fabrication with Kollidon® VA64, which is a material that has previously been utilized in direct compression and hot-melt extrusion processes. Formulation and melt-blending strategies were employed to increase the printability of the material. The paper defines for the first time the essential parameter profile required for successful 3D printing and lists several pre-screening tools that should be employed to guide future material formulation for the fused-filament fabrication of solid dosage forms.

High-Speed Fuses in IGBT based Voltage Source Converters

DEFF Research Database (Denmark)

Iov, Florin; Blaabjerg, Frede; Rasmussen, Henrik

2005-01-01

The demand for protection of power electronic applications has during the last couple of years increased regarding the high-power IGBT modules. Even with an active protection, a high power IGBT still has a risk of exhibiting a violent rupture in the case of a fault if IGBT fuses do not protect it...... protection. First, the problem of adding inductance in the DC-link circuit is treated, second a short discussion of the protection of the IGBT module is done, and finally, the impact of the high frequency loading on the current carrying capability of the fuses is presented....

Modelling and Analysis of Proximity Effect in IGBT Fuses

DEFF Research Database (Denmark)

Iov, Florin; Blaabjerg, Frede; Rasmussen, Henrik

2005-01-01

The demand for protection of power electronic applications has during the last couple of years increased regarding the high-power IGBT modules. The consequences of electrical faults can be severe in special cases; not only on the equipment but also to people, if safety principles are not applied....... Even with an active protection, a high power IGBT still has a risk of exhibiting a violent rupture in the case of a fault if e.g. IGBT fuses are not protecting it. By introducing fuses into voltage source converters a better protection of IGBT's can be achieved. However, skin and proximity effects...

EPR dosimetry with tooth enamel: A review

International Nuclear Information System (INIS)

Fattibene, Paola; Callens, Freddy

2010-01-01

When tooth enamel is exposed to ionizing radiation, radicals are formed, which can be detected using electron paramagnetic resonance (EPR) techniques. EPR dosimetry using tooth enamel is based on the (presumed) correlation between the intensity or amplitude of some of the radiation-induced signals with the dose absorbed in the enamel. In the present paper a critical review is given of this widely applied dosimetric method. The first part of the paper is fairly fundamental and deals with the main properties of tooth enamel and some of its model systems (e.g., synthetic apatites). Considerable attention is also paid to the numerous radiation-induced and native EPR signals and the radicals responsible for them. The relevant methods for EPR detection, identification and spectrum analyzing are reviewed from a general point of view. Finally, the needs for solid-state modelling and studies of the linearity of the dose response are investigated. The second part is devoted to the practical implementation of EPR dosimetry using enamel. It concerns specific problems of preparation of samples, their irradiation and spectrum acquisition. It also describes how the dosimetric signal intensity and dose can be retrieved from the EPR spectra. Special attention is paid to the energy dependence of the EPR response and to sources of uncertainties. Results of and problems encountered in international intercomparisons and epidemiological studies are also dealt with. In the final section the future of EPR dosimetry with tooth enamel is analyzed.

The Dynamics of Supernumerary Tooth Development Are Differentially Regulated by Sprouty Genes

Czech Academy of Sciences Publication Activity Database

Lagronová-Churavá, Svatava; Špoutil, František; Vojtěchová, Simona; Lesot, H.; Peterka, Miroslav; Klein, O. D.; Peterková, Renata

2013-01-01

Roč. 320, č. 5 (2013), s. 307-320 ISSN 1552-5007 R&D Projects: GA ČR(CZ) GAP305/12/1766 Institutional support: RVO:68378041 Keywords : embryonic signaling center * morphogenesis * mouse odontogenesis Subject RIV: EA - Cell Biology Impact factor: 1.876, year: 2013

[Establishment of database with standard 3D tooth crowns based on 3DS MAX].

Science.gov (United States)

Cheng, Xiaosheng; An, Tao; Liao, Wenhe; Dai, Ning; Yu, Qing; Lu, Peijun

2009-08-01

The database with standard 3D tooth crowns has laid the groundwork for dental CAD/CAM system. In this paper, we design the standard tooth crowns in 3DS MAX 9.0 and create a database with these models successfully. Firstly, some key lines are collected from standard tooth pictures. Then we use 3DS MAX 9.0 to design the digital tooth model based on these lines. During the design process, it is important to refer to the standard plaster tooth model. After some tests, the standard tooth models designed with this method are accurate and adaptable; furthermore, it is very easy to perform some operations on the models such as deforming and translating. This method provides a new idea to build the database with standard 3D tooth crowns and a basis for dental CAD/CAM system.

Sequential Multicomponent Strategy for the Diastereoselective Synthesis of Densely Functionalized Spirooxindole-Fused Thiazolidines

NARCIS (Netherlands)

Rainoldi, Giulia; Begnini, Fabio; De Munnik, Mariska; Lo Presti, Leonardo; Vande Velde, Christophe M.L.; Orru, Romano; Lesma, Giordano; Ruijter, Eelco; Silvani, Alessandra

2018-01-01

We developed two Ugi-type three-component reactions of spirooxindole-fused 3-thiazolines, isocyanides, and either carboxylic acids or trimethylsilyl azide, to give highly functionalized spirooxindole-fused thiazolidines. Two diverse libraries were generated using practical and robust procedures

Recycling potential for low voltage and high voltage high rupturing capacity fuse links.

Science.gov (United States)

Psomopoulos, Constantinos S; Barkas, Dimitrios A; Kaminaris, Stavros D; Ioannidis, George C; Karagiannopoulos, Panagiotis

2017-12-01

Low voltage and high voltage high-rupturing-capacity fuse links are used in LV and HV installations respectively, protecting mainly the LV and HV electricity distribution and transportation networks. The Waste Electrical and Electronic Equipment Directive (2002/96/EC) for "Waste of electrical and electronic equipment" is the main related legislation and as it concerns electrical and electronic equipment, it includes electric fuses. Although, the fuse links consist of recyclable materials, only small scale actions have been implemented for their recycling around Europe. This work presents the possibilities for material recovery from this specialized industrial waste for which there are only limited volume data. Furthermore, in order to present the huge possibilities and environmental benefits, it presents the potential for recycling of HRC fuses used by the Public Power Corporation of Greece, which is the major consumer for the country, but one of the smallest ones in Europe and globally, emphasizing in this way in the issue. According to the obtained results, fuse recycling could contribute to the effort for minimize the impacts on the environment through materials recovery and reduction of the wastes' volume disposed of in landfills. Copyright © 2017 Elsevier Ltd. All rights reserved.

A simple rule governs the evolution and development of hominin tooth size.

Science.gov (United States)

Evans, Alistair R; Daly, E Susanne; Catlett, Kierstin K; Paul, Kathleen S; King, Stephen J; Skinner, Matthew M; Nesse, Hans P; Hublin, Jean-Jacques; Townsend, Grant C; Schwartz, Gary T; Jernvall, Jukka

2016-02-25

The variation in molar tooth size in humans and our closest relatives (hominins) has strongly influenced our view of human evolution. The reduction in overall size and disproportionate decrease in third molar size have been noted for over a century, and have been attributed to reduced selection for large dentitions owing to changes in diet or the acquisition of cooking. The systematic pattern of size variation along the tooth row has been described as a 'morphogenetic gradient' in mammal, and more specifically hominin, teeth since Butler and Dahlberg. However, the underlying controls of tooth size have not been well understood, with hypotheses ranging from morphogenetic fields to the clone theory. In this study we address the following question: are there rules that govern how hominin tooth size evolves? Here we propose that the inhibitory cascade, an activator-inhibitor mechanism that affects relative tooth size in mammals, produces the default pattern of tooth sizes for all lower primary postcanine teeth (deciduous premolars and permanent molars) in hominins. This configuration is also equivalent to a morphogenetic gradient, finally pointing to a mechanism that can generate this gradient. The pattern of tooth size remains constant with absolute size in australopiths (including Ardipithecus, Australopithecus and Paranthropus). However, in species of Homo, including modern humans, there is a tight link between tooth proportions and absolute size such that a single developmental parameter can explain both the relative and absolute sizes of primary postcanine teeth. On the basis of the relationship of inhibitory cascade patterning with size, we can use the size at one tooth position to predict the sizes of the remaining four primary postcanine teeth in the row for hominins. Our study provides a development-based expectation to examine the evolution of the unique proportions of human teeth.

Tooth microwear formation rate in Gasterosteus aculeatus.

Science.gov (United States)

Baines, D C; Purnell, M A; Hart, P J B

2014-05-01

Tooth microwear feature densities were significantly increased in a population of laboratory-reared three-spined stickleback Gasterosteus aculeatus in four days, after they were transferred from a limnetic feeding regime to a benthic feeding regime. These results show that even in aquatic vertebrates with non-occluding teeth, changes in feeding can cause changes in tooth microwear in just a few days, as in mammals. © 2014 The Authors. Journal of Fish Biology published by John Wiley & Sons Ltd on behalf of The Fisheries Society of the British Isles.

Apical Revascularization after Delayed Tooth Replantation: An Unusual Case

Directory of Open Access Journals (Sweden)

Marília Pacífico Lucisano

2016-01-01

Full Text Available The aim of this paper is to present the clinical and radiological outcome of the treatment involving a delayed tooth replantation after an avulsed immature permanent incisor, with a follow-up of 1 year and 6 months. An 8-year-old boy was referred after dental trauma that occurred on the previous day. The permanent maxillary right central incisor (tooth 11 had been avulsed. The tooth was hand-held during endodontic therapy and an intracanal medication application with calcium hydroxide-based paste was performed. An apical plug with mineral trioxide aggregate (MTA was introduced into the apical portion of the canal. When the avulsed tooth was replanted with digital pressure, a blood clot had formed within the socket, which moved the MTA apical plug about 2 mm inside of the root canal. These procedures developed apical revascularization, which promoted a successful endodontic outcome, evidenced by apical closure, slight increase in root length, and absence of signs of external root resorption, during a follow-up of 1 year and 6 months.

Enhancement of laser induced damage threshold of fused silica by acid etching combined with UV laser conditioning

International Nuclear Information System (INIS)

Chen Meng; Xiang Xia; Jiang Yong; Zu Xiaotao; Yuan Xiaodong; Zheng Wanguo; Wang Haijun; Li Xibin; Lu Haibing; Jiang Xiaodong; Wang Chengcheng

2010-01-01

Acid etching combined with UV laser conditioning is developed to enhance the laser induced damage threshold (LIDT) of fused silica. Firstly, the fused silica is etched for 1 ∼ 100 min with a buffered 1% HF solution. After acid etching, its transmittance, surface roughness and LIDT are measured. The results reveal that the fused silica has the highest LIDT and transmittance after etching for 10 min. Then UV laser (355 nm) conditioning is adopted to process the 10-min-etched fused silica. When the laser fluence is below 60% of fused silica's zero probability damage threshold, the LIDT increases gradually with the increase of laser conditioning fluence. However, the LIDT rapidly decreases to be lower than the threshold of the 10-min-etched fused silica when the conditioning fluence is up to 80% of the threshold. Proper acid etching and laser conditioning parameters will effectively enhance the laser damage resistance of fused silica. (authors)

Combined Kernel-Based BDT-SMO Classification of Hyperspectral Fused Images

Directory of Open Access Journals (Sweden)

Fenghua Huang

2014-01-01

Full Text Available To solve the poor generalization and flexibility problems that single kernel SVM classifiers have while classifying combined spectral and spatial features, this paper proposed a solution to improve the classification accuracy and efficiency of hyperspectral fused images: (1 different radial basis kernel functions (RBFs are employed for spectral and textural features, and a new combined radial basis kernel function (CRBF is proposed by combining them in a weighted manner; (2 the binary decision tree-based multiclass SMO (BDT-SMO is used in the classification of hyperspectral fused images; (3 experiments are carried out, where the single radial basis function- (SRBF- based BDT-SMO classifier and the CRBF-based BDT-SMO classifier are used, respectively, to classify the land usages of hyperspectral fused images, and genetic algorithms (GA are used to optimize the kernel parameters of the classifiers. The results show that, compared with SRBF, CRBF-based BDT-SMO classifiers display greater classification accuracy and efficiency.

The randomized shortened dental arch study: tooth loss over five years.

Science.gov (United States)

Walter, M H; Hannak, W; Kern, M; Mundt, T; Gernet, W; Weber, A; Wöstmann, B; Stark, H; Werner, D; Hartmann, S; Range, U; Jahn, F; Passia, N; Pospiech, P; Mitov, G; Brückner, J; Wolfart, S; Busche, E; Luthardt, R G; Heydecke, G; Marré, B

2013-04-01

The study was designed to provide clinical outcome data for two treatments of the shortened dental arch (SDA). In a multicenter randomized controlled clinical trial, patients with complete molar loss in one jaw were provided with either a partial removable dental prosthesis (PRDP) retained with precision attachments or treated according to the SDA concept preserving or restoring a premolar occlusion. No implants were placed. The primary outcome was tooth loss. Of 152 treated patients, 132 patients reached the 5-year examination. Over 5 years, 38 patients experienced tooth loss. For the primary outcome tooth loss, the Kaplan-Meier survival rates at 5 years were 0.74 (95% CI 0.64, 0.84) in the PRDP group and 0.74 (95% CI 0.63, 0.85) in the SDA group. For tooth loss in the study jaw, the survival rates at 5 years were 0.88 (95% CI 0.80, 0.95) in the PRDP group and 0.84 (95% CI 0.74, 0.93) in the SDA group. The differences were not significant. No Cox regression models of appropriate fit explaining tooth loss on the patient level could be found. The overall treatment goals of a sustainable oral rehabilitation and the avoidance of further tooth loss over longer periods were not reliably achievable. The influence of the type of prosthetic treatment on tooth loss might have been overestimated. Regarding our results, the patient's view will gain even more importance in the clinical decision between removable and fixed restorations in SDAs.

Minimum intervention dentistry and the management of tooth wear in general practice.

Science.gov (United States)

Meyers, I A

2013-06-01

The incidence of tooth wear, or non-carious tooth surface loss (NCTSL), is increasing and oral rehabilitation of patients with non-carious tooth loss requires strategies that address all the factors relevant to the aetiology and pathogenesis of the condition. The multifactorial nature of tooth wear and the variability in its clinical presentation provides treatment challenges for the clinician and successful management must be more than just restoration. Management must include an appropriate mix of preventive and restorative strategies and an understanding that long-term restorative success is affected by the patient's oral environment, and how diet, lifestyle and medical status can modify this environment. Ultimately, the success of any restorative intervention is very dependent on the stability of the oral environment and the condition of the remaining tooth structure. Minimum intervention dentistry (MID) philosophies are ideally suited to tooth wear cases and an overall MID strategy involving diagnosis, recognition and control of predisposing factors, stabilization of the oral environment, remineralization and restoration of the tooth structure, and ongoing maintenance can be implemented. When restorative treatment is required, contemporary materials and techniques are available that can provide cost-effective and conservative restorative alternatives for patients unable to undergo the complex indirect restorative techniques that are both costly and time consuming to implement. These minimally invasive approaches are not only an economically viable solution, but can provide aesthetic and functional rehabilitation and maintain tooth structure as a precursor to more complex restorative options when required. © 2013 Australian Dental Association.

Moessbauer Studies of Stannous Fluoride Reactivity with Synthetic Tooth Enamel - A Model for the Tooth Cavity Protection Actions of Novel Dentifrices

International Nuclear Information System (INIS)

Denes, Georges; Muntasar, Abdualhafeed; Kozak, Kathy M.; Baig, Arif A.; White, Donald J.

2002-01-01

SnF 2 is an important toothpaste ingredient, added for the provision of clinical efficacy for hard and soft tissue diseases and in breath protection. Synthetic calcium hydroxyapatite powders were exposed to liquid supernates (25 w/w% toothpaste water slurries, centrifuged) of Crest Gum Care (registered) (SnF 2 ) dentifrice. One-minute treatments were followed by 3x water washing, centrifugation and lyophilization. Post treatment, powders were analyzed by Moessbauer spectroscopy with 0.5-1 gram of treated apatite powder. Results show that tooth mineral stannous fluoride interactions include: (1) formation of surface reaction products with both Sn(II) and Sn(IV) oxidation states; (2) Sn-F binding on mineral surfaces with no evidence of SnO. The surface binding is, however, not pure Sn-F but contains contributions of other ligands, probably oxygens from surface phosphates or hydroxyl groups. Results also suggest that surface reacted stannous tin is oxidized with time, even when bound as a layer on the tooth surface. This study demonstrates for the first time the presence of Sn-F on tooth enamel post treatment and the contribution of passivation to long term stannous chemistry on tooth surfaces. The study also illustrates the practical applications of the Moessbauer technique.

Erosive tooth wear in children

NARCIS (Netherlands)

Carvalho, T.S.; Lussi, A.; Jaeggi, T.; Gambon, D.L.; Lussi, A.; Ganss, C.

2014-01-01

Erosive tooth wear in children is a common condition. Besides the anatomical differences between deciduous and permanent teeth, additional histological differences may influence their susceptibility to dissolution. Considering laboratory studies alone, it is not clear whether deciduous teeth are

Search for stress dependence in the internal friction of fused silica

International Nuclear Information System (INIS)

Willems, Phil; Lamb, Corinne; Heptonstall, Alastair; Hough, Jim

2003-01-01

The quality factor (Q) of the vertical bounce mode of a fused silica fiber pendulum is measured at high and low stresses. The internal friction of fused silica fibers is found to be independent of stress from 12.8 to 213 MPa at a level of 1.6x10 -8 . Comparison with Q's of fiber bending modes is consistent with losses concentrated in the surface of the fiber

Tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students

Directory of Open Access Journals (Sweden)

Clement C. Azodo

2010-08-01

Full Text Available Objective: To determine the tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students. Methods: A descriptive cross-sectional study of students of Federal School of Dental Therapy and Technology Enugu, Nigeria. Self-administered questionnaire was used to obtain information on demography, frequency, duration and technique of tooth brushing and tongue cleaning as well as information on consumption of snacks. Results: A total of 242 students responded. Dental technology students made up 52.5% of the respondents and dental therapist in training made up 47.5%. Majority (63.2% of the respondents considered the strength of tooth brush when purchasing a tooth brush and 78.9% use tooth brushes with medium strength. Seven-tenth (71.9% of the respondents brush their teeth twice daily and 52.1% brush for 3–5 minutes. About one-third (30.2% brush their teeth in front of a mirror. Chewing stick was used by 51.7% of respondents in addition to the use of tooth brush. Tongue cleaning was done by 94.2% with only 9.5% using a tongue cleaner. Only 20.2% reported regular snacks consumption. Nine-tenth (90.4% of respondents were previously involved in educating others, apart from their colleagues, on tooth brushing. Conclusion: This survey revealed that most of the dental therapy and technology students had satisfactory tooth-brushing behaviour. The zeal to educate others about proper tooth brushing revealed in this study suggests that the students may be helpful in oral health promotion.

Energy harvesting from mastication forces via a smart tooth

Science.gov (United States)

Bani-Hani, Muath; Karami, M. Amin

2016-04-01

The batteries of the current pacing devices are relatively large and occupy over 60 percent of the size of pulse generators. Therefore, they cannot be placed in the subtle areas of human body. In this paper, the mastication force and the resulting tooth pressure are converted to electricity. The pressure energy can be converted to electricity by using the piezoelectric effect. The tooth crown is used as a power autonomous pulse generator. We refer to this envisioned pulse generator as the smart tooth. The smart tooth is in the form of a dental implant. A piezoelectric vibration energy harvester is designed and modeled for this purpose. The Piezoelectric based energy harvesters investigated and analyzed in this paper initially includes a single degree of freedom piezoelectric based stack energy harvester which utilizes a harvesting circuit employing the case of a purely resistive circuit. The next step is utilizing and investigating a bimorph piezoelectric beam which is integrated/embedded in the smart tooth implant. Mastication process causes the bimorph beam to buckle or return to unbuckled condition. The transitions results in vibration of the piezoelectric beam and thus generate energy. The power estimated by the two mechanisms is in the order of hundreds of microwatts. Both scenarios of the energy harvesters are analytically modeled. The exact analytical solution of the piezoelectric beam energy harvester with Euler-Bernoulli beam assumptions is presented. The electro-mechanical coupling and the geometric nonlinearities have been included in the model for the piezoelectric beam.

Root canal treatment of mandibular second premolar tooth with taurodontism

Directory of Open Access Journals (Sweden)

Vujašković Mirjana

2008-01-01

Full Text Available INTRODUCTION Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. CASE OUTLINE The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. CONCLUSION Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

Orthodontic tooth movement with clear aligners.

Science.gov (United States)

Drake, Carl T; McGorray, Susan P; Dolce, Calogero; Nair, Madhu; Wheeler, Timothy T

2012-01-01

Clear aligners provide a convenient model to measure orthodontic tooth movement (OTM). We examined the role of in vivo aligner material fatigue and subject-specific factors in tooth movement. Fifteen subjects seeking orthodontic treatment at the University of Florida were enrolled. Results were compared with data previously collected from 37 subjects enrolled in a similar protocol. Subjects were followed prospectively for eight weeks. An upper central incisor was programmed to move 0.5 mm. every two weeks using clear aligners. A duplicate aligner was provided for the second week of each cycle. Weekly polyvinyl siloxane (PVS) impressions were taken, and digital models were fabricated to measure OTM. Initial and final cone beam computed tomography (CBCT) images were obtained to characterize OTM. Results were compared to data from a similar protocol, where subjects received a new aligner biweekly. No significant difference was found in the amount of OTM between the two groups, with mean total OTM of 1.11 mm. (standard deviation (SD) 0.30) and 1.07 mm. (SD 0.33) for the weekly aligner and biweekly control groups, respectively (P = 0.72). Over eight weeks, in two-week intervals, material fatigue does not play a significant role in the rate or amount of tooth movement.

High strength fused silica flexures manufactured by femtosecond laser

Science.gov (United States)

Bellouard, Yves; Said, Ali A.; Dugan, Mark; Bado, Philippe

2009-02-01

Flexures are mechanical elements used in micro- and precision-engineering to precisely guide the motion of micro-parts. They consist of slender bodies that deform elastically upon the application of a force. Although counter-intuitive at first, fused silica is an attractive material for flexure. Pending that the machining process does not introduce surface flaws that would lead to catastrophic failure, the material has a theoretically high ultimate tensile strength of several GPa. We report on high-aspect ratio fused silica flexures manufactured by femtosecond laser combined with chemical etching. Notch-hinges with thickness as small as twenty microns and aspect ratios comparable to aspect ratios obtained by Deep- Reactive-Ion-Etching (DRIE) were fabricated and tested under different loading conditions. Multiple fracture tests were performed for various loading conditions and the cracks morphologies were analyzed using Scanning Electron Microscopy. The manufactured elements show outstanding mechanical properties with flexural strengths largely exceeding those obtained with other technologies and materials. Fused silica flexures offer a mean to combine integrated optics with micro-mechanics in a single monolithic substrate. Waveguides and mechanical elements can be combined in a monolithic devices opening new opportunities for integrated opto-mechatronics devices.

Monte Carlo modeling of human tooth optical coherence tomography imaging

International Nuclear Information System (INIS)

Shi, Boya; Meng, Zhuo; Wang, Longzhi; Liu, Tiegen

2013-01-01

We present a Monte Carlo model for optical coherence tomography (OCT) imaging of human tooth. The model is implemented by combining the simulation of a Gaussian beam with simulation for photon propagation in a two-layer human tooth model with non-parallel surfaces through a Monte Carlo method. The geometry and the optical parameters of the human tooth model are chosen on the basis of the experimental OCT images. The results show that the simulated OCT images are qualitatively consistent with the experimental ones. Using the model, we demonstrate the following: firstly, two types of photons contribute to the information of morphological features and noise in the OCT image of a human tooth, respectively. Secondly, the critical imaging depth of the tooth model is obtained, and it is found to decrease significantly with increasing mineral loss, simulated as different enamel scattering coefficients. Finally, the best focus position is located below and close to the dental surface by analysis of the effect of focus positions on the OCT signal and critical imaging depth. We anticipate that this modeling will become a powerful and accurate tool for a preliminary numerical study of the OCT technique on diseases of dental hard tissue in human teeth. (paper)

Elderly complete denture wearers: a social approach to tooth loss.

Science.gov (United States)

Papadaki, Eftychia; Anastassiadou, Vassiliki

2012-06-01

To correlate emotional reactions to tooth loss with denture satisfaction attributes in elderly complete denture wearers. Total tooth loss is a serious life event, and poor oral health has an impact on daily life. Edentulism treated by rehabilitation with dentures can have a positive effect on patients' self-image and social behaviour. A group of 80 edentulous subjects undergoing routine prosthetic care in a Greek Department of Prosthetic Dentistry were interviewed using two structured questionnaires. The first questionnaire explored reactions to tooth loss, whereas the second measured their subjective experience of complete dentures. The responses to both questionnaires were compared using the statistical package SPSS v.17. The results showed significant correlation between aspects of tooth loss experience and complete denture satisfaction. Despite the fact that a substantial proportion of patients were satisfied with their complete dentures, some patients experienced increased social and psychological problems related to their edentulousness and the wearing of complete dentures. The aesthetic and functional aspects of complete dentures affected both patients' social behaviour and self-confidence. Total tooth loss was not only reflected in patient's social behaviour and self-image, but it had a complex and multifaceted impact on satisfaction from complete dentures. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Comparing monolithic and fused core HPLC columns for fast chromatographic analysis of fat-soluble vitamins.

Science.gov (United States)

Kurdi, Said El; Muaileq, Dina Abu; Alhazmi, Hassan A; Bratty, Mohammed Al; Deeb, Sami El

2017-06-27

HPLC stationary phases of monolithic and fused core type can be used to achieve fast chromatographic separation as an alternative to UPLC. In this study, monolithic and fused core stationary phases are compared for fast separation of four fat-soluble vitamins. Three new methods on the first and second generation monolithic silica RP-18e columns and a fused core pentafluoro-phenyl propyl column were developed. Application of three fused core columns offered comparable separations of retinyl palmitate, DL-α-tocopheryl acetate, cholecalciferol and menadione in terms of elution speed and separation efficiency. Separation was achieved in approx. 5 min with good resolution (Rs > 5) and precision (RSD ≤ 0.6 %). Monolithic columns showed, however, a higher number of theoretical plates, better precision and lower column backpressure than the fused core column. The three developed methods were successfully applied to separate and quantitate fat-soluble vitamins in commercial products.

FUSE: a profit maximization approach for functional summarization of biological networks.

Science.gov (United States)

Seah, Boon-Siew; Bhowmick, Sourav S; Dewey, C Forbes; Yu, Hanry

2012-03-21

The availability of large-scale curated protein interaction datasets has given rise to the opportunity to investigate higher level organization and modularity within the protein interaction network (PPI) using graph theoretic analysis. Despite the recent progress, systems level analysis of PPIS remains a daunting task as it is challenging to make sense out of the deluge of high-dimensional interaction data. Specifically, techniques that automatically abstract and summarize PPIS at multiple resolutions to provide high level views of its functional landscape are still lacking. We present a novel data-driven and generic algorithm called FUSE (Functional Summary Generator) that generates functional maps of a PPI at different levels of organization, from broad process-process level interactions to in-depth complex-complex level interactions, through a pro t maximization approach that exploits Minimum Description Length (MDL) principle to maximize information gain of the summary graph while satisfying the level of detail constraint. We evaluate the performance of FUSE on several real-world PPIS. We also compare FUSE to state-of-the-art graph clustering methods with GO term enrichment by constructing the biological process landscape of the PPIS. Using AD network as our case study, we further demonstrate the ability of FUSE to quickly summarize the network and identify many different processes and complexes that regulate it. Finally, we study the higher-order connectivity of the human PPI. By simultaneously evaluating interaction and annotation data, FUSE abstracts higher-order interaction maps by reducing the details of the underlying PPI to form a functional summary graph of interconnected functional clusters. Our results demonstrate its effectiveness and superiority over state-of-the-art graph clustering methods with GO term enrichment.

Dictionary-Based Image Denoising by Fused-Lasso Atom Selection

Directory of Open Access Journals (Sweden)

Ao Li

2014-01-01

Full Text Available We proposed an efficient image denoising scheme by fused lasso with dictionary learning. The scheme has two important contributions. The first one is that we learned the patch-based adaptive dictionary by principal component analysis (PCA with clustering the image into many subsets, which can better preserve the local geometric structure. The second one is that we coded the patches in each subset by fused lasso with the clustering learned dictionary and proposed an iterative Split Bregman to solve it rapidly. We present the capabilities with several experiments. The results show that the proposed scheme is competitive to some excellent denoising algorithms.

Kinematics modeling and experimentation of the multi-manipulator tooth-arrangement robot for full denture manufacturing.

Science.gov (United States)

Zhang, Yong-de; Jiang, Jin-gang; Liang, Ting; Hu, Wei-ping

2011-12-01

Artificial teeth are very complicated in shape, and not easy to be grasped and manipulated accurately by a single robot. The method of tooth-arrangement by multi-manipulator for complete denture manufacturing proposed in this paper. A novel complete denture manufacturing mechanism is designed based on multi-manipulator and dental arch generator. Kinematics model of the multi-manipulator tooth-arrangement robot is built by analytical method based on tooth-arrangement principle for full denture. Preliminary experiments on tooth-arrangement are performed using the multi-manipulator tooth-arrangement robot prototype system. The multi-manipulator tooth-arrangement robot prototype system can automatically design and manufacture a set of complete denture that is suitable for a patient according to the jaw arch parameters. The experimental results verified the validity of kinematics model of the multi-manipulator tooth-arrangement robot and the feasibility of the manufacture strategy of complete denture fulfilled by multi-manipulator tooth-arrangement robot.

Outcome of Endodontically Treated Teeth Diagnosed With Cracked Tooth

Science.gov (United States)

2015-06-01

However, variable symptoms complicate the diagnosis (9). In a study of 32 patients presenting with diffuse longstanding orofacial pain eventually...883-92. 22)Byrnjulsen A, Fristad I, Grevstad T, Hals-Kvinnsland I. Incompletely fractured teeth associated with diffuse longstanding orofacial pain ...cracked tooth is highly associated with discomfort. Patients often describe a momentary, sudden, sharp, lancinating pain that results in continuous tooth

Technical Modifications of Tooth-borne Distraction Device for Anterior Maxillary Distraction in Cleft Patients

Directory of Open Access Journals (Sweden)

Dhivakar Selvaraj

2014-01-01

Full Text Available The tooth-borne distractor gained popularity for anterior maxillary distraction because of the effective treatment outcome, no need for external fixation, noninvasive, less chewing difficulty, social tolerance and economical. Tooth-borne distractor device needs modification in terms of maxillary deficiency, tooth position, retained deciduous tooth, and fistula. Hence, we recommend the following modifications in certain circumstances for the successful treatment outcome.

Tooth engineering: searching for dental mesenchymal cells sources.

Directory of Open Access Journals (Sweden)

Laetitia eKeller

2011-03-01

Full Text Available The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at ED14 allowed making full teeth with crown, root, periodontal ligament fibers and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.

Development of the nervus terminalis in mammals including toothed whales and humans.

Science.gov (United States)

Oelschläger, H A; Buhl, E H; Dann, J F

1987-01-01

The early ontogenesis and topography of the mammalian terminalis system was investigated in 43 microslide series of toothed whale and human embryos and fetuses. In early embryonal stages the development of the nasal pit, the olfacto-terminalis placode, and the olfactory bulb anlage is rather similar in toothed whales and humans. However, toothed whales do not show any trace of the vomeronasalis complex. In early fetal stages the olfactory bulb anlage in toothed whales is reduced and leaves the isolated future terminalis ganglion (ganglia) which contains the greatest number of cells within Mammalia. The ganglion is connected with the nasal mucosa via peripheral fiber bundles and with the telencephalon via central terminalis rootlets. The functional implications of the terminalis system in mammals and its evolution in toothed whales are discussed. Obviously, the autonomic component has been enlarged in the course of perfect adaptation to an aquatic environment.

Recording and quantification of ultrasonic echolocation clicks from free-ranging toothed whales

DEFF Research Database (Denmark)

Madsen, Peter Teglberg; Wahlberg, Magnus

2007-01-01

Toothed whales produce short, ultrasonic clicks of high directionality and source level to probe their environment acoustically. This process, termed echolocation, is to a large part governed by the properties of the emitted clicks. Therefore derivation of click source parameters from free......-ranging animals is of increasing importance to understand both how toothed whales use echolocation in the wild and how they may be monitored acoustically. This paper addresses how source parameters can be derived from free-ranging toothed whales in the wild using calibrated multi-hydrophone arrays and digital...... of discrete versions of toothed whale clicks that are meaningful in a biosonar context....

Frequency variations of discrete cranial traits in major human populations. I. Supernumerary ossicle variations.

Science.gov (United States)

Hanihara, T; Ishida, H

2001-06-01

Four supernumerary ossicle variations-the ossicle at the lambda, the parietal notch bone, the asterionic bone, and the occipitomastoid bone-were examined for laterality differences, intertrait correlations, sex differences, and between group variations in the samples from around the world. Significant laterality differences were not detected in almost all samples. In some pairs of traits, significant association of occurrence were found. Several geographic samples were sexually dimorphic with respect to the asterionic bone and to a lesser extent for the parietal notch bone. East/Northeast Asians including the Arctic populations in general had lower frequencies of the 4 accessory ossicles. Australians, Melanesians and the majority of the New World peoples, on the other hand, generally had high frequencies. In the western hemisphere of the Old World, Subsaharan Africans had relatively high frequencies. Except for the ossicle at the lambda, the distribution pattern in incidence showed clinal variation from south to north. Any identifiable adaptive value related to environmental or subsistence factors may be expressed in such clinal variation. This may allow us to hypothesise that not only mechanical factors but a founder effect, genetic drift, and population structure could have been the underlying causes for interregional variation and possible clines in the incidences of the accessory ossicles.

Overcurrent protection of transformers. Part 2: Traditional and new fusing philosophies for small and large transformers

Energy Technology Data Exchange (ETDEWEB)

Cook, C. J.; Niemira, J. K.

2003-07-01

New and traditional fusing philosophies for protecting transformers are discussed. This second in a two-part paper covers selection criteria for a transformer-primary fuse to protect the transformer consistent with industry-accepted through-fault protection curves. Also covered are the principles of coordination as they relate to the proper selection of the primary-side fuse and power fuses and the principles underlying the protection of load-side conductors and cables. The critical nature of secondary fault protection on small three-phase transformers used on industrial, commercial, and institutional power systems, as well as small-to-medium size three-phase power transformers used in utility substations is emphasized, in view of the long lead time and expense involved in replacing these transformers. In contrast, no special protection recommendations are made for small-kVA overhead distribution transformers, since they are not considered likely to experience secondary faults, and the rare faults that do occur will not likely be detected and cleared by the primary fuse. Also of importance is the fact that these transformers are inexpensive and readily available. Overall, large fuse rating, used in combination with a tank-mounted surge arrester is recommended, because it can provide better transformer protection than the smaller fuse ratings traditionally employed. 4 refs., 2 tabs., 4 figs.

A study of dental anomalies

International Nuclear Information System (INIS)

Yang, Sook; Kim, Jae Duck

1993-01-01

The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalence of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption 8.50%; transposition 0.33%; rotation 23.67%; microdontia 11.16% (peg lateral is 5.33%; third molar 5.83%); prolonged retention of deciduous teeth 1.33%; crowding 49.83%; and spacing 15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowding and spacing had respectively higher rate in mandible and in maxilla.

Crossed fused renal ectopia in a Persian cat

Directory of Open Access Journals (Sweden)

Sang-Hyuk Seo

2017-03-01

Full Text Available Case summary This report describes a rare case of crossed fused renal ectopia (CFRE in a cat. A mature intact male Persian cat presented with bloody nasal discharge and ascites. Diagnostic studies revealed an ectopic left kidney fused with an orthotopic right kidney and a concurrent feline infectious peritonitis (FIP infection. The FIP was responsible for clinical signs in this cat, while clinical signs associated with CFRE were not obvious. Despite receiving intensive treatment, the cat died. A post-mortem examination was not performed because the owners declined approval. Relevance and novel information To the best of our knowledge, this is the first report of L-shaped CFRE in a cat. In addition, this report describes the CT features of L-shaped CFRE in a cat.

Diagnosis and staging of breast cancer by SPECT images fused with CT images

International Nuclear Information System (INIS)

Li Yanjing; Zhu Qiaomei

2007-01-01

Objective: To evaluate the TNM staging value of 99mTc-MIBI scintimammotraphy with SPECT-CT images fusing for the diagnosis of breast cancer. Methods: 10 patients with breast cancer underwent scintimammography with 99mTc-MIBI, and SPECT images were fused with CT images. Images were compared with final diagnosis confirmed by histopathology. Results: Of the 19 breast cancer patients, one case of invasive ductal carcinoma showed false-negative. Among 18 cases of positive lesions, axillary metastases were involved in 10, supraclavicular nodes were also defined in 3, para-sternum nodes were involved in 2, 2 were missed and 1 cases without metastatic node. The axillary lymph nodes were divided into three levels with respect to their position relative to the pectoralis minor muscle by fused images. Conclusion: 99mTc-MIBI scintimammotraphy combined with SPECT-CT images fusing is of some clinical value in TNM staging of breast cancer. (authors)

Diagnostics of power transmissions system with tooth gear

Directory of Open Access Journals (Sweden)

Grzegorz WOJNAR

2008-01-01

Full Text Available This paper presents results of laboratory tests that were aimed at detecting early stages of various faults in toothed wheels by measurement and analysis of transverse vibration speed of the transmission gear shafts. In experimental investigation, cracking of the root tooth and chipping of the tooth were detected. The laser vibrometer Ometron VH300+ was used for non-contact measurement of shaft transversal vibration speed. Gear vibrations were recorded in selected points of gear housing and gear shafts at different speeds and gear loads. Results were analyzed and compared but in this paper is presented only selected examples. This paper shows that on the basis of the transverse vibration speed of transmission gear shafts, it is possible to detect defects at an earlier stage than on the basis of the housing vibration accelerations. In the case of measuring gear shaft vibration velocity, the way of the signal generated by the defect of a gear wheel (or bearing is shortened as well as the influence of composed transmittance of the bearing-gear housing system is eliminated. WV time-frequency analysis and complex continuous wavelet transformations were used for detection. The authors introduced a measure of local tooth damage, which was proportional to the size of damage. The results of research presented in this paperconfirmed that the defect's measure is very sensitive to the development of teeth faults.

On optimization of internal/external spur gears tooth bending strength

DEFF Research Database (Denmark)

Pedersen, Niels Leergaard

2014-01-01

level at the tooth root. As with most machine elements the design/geometry is defined in standards (ISO). The present work focuses on changing the tooth root design of both external and internal gears, in order to improve the stress concentration factor. The design changes made are compliant...

Bulk damage and absorption in fused silica due to high-power laser applications

Science.gov (United States)

Nürnberg, F.; Kühn, B.; Langner, A.; Altwein, M.; Schötz, G.; Takke, R.; Thomas, S.; Vydra, J.

2015-11-01

Laser fusion projects are heading for IR optics with high broadband transmission, high shock and temperature resistance, long laser durability, and best purity. For this application, fused silica is an excellent choice. The energy density threshold on IR laser optics is mainly influenced by the purity and homogeneity of the fused silica. The absorption behavior regarding the hydroxyl content was studied for various synthetic fused silica grades. The main absorption influenced by OH vibrational excitation leads to different IR attenuations for OH-rich and low-OH fused silica. Industrial laser systems aim for the maximum energy extraction possible. Heraeus Quarzglas developed an Yb-doped fused silica fiber to support this growing market. But the performance of laser welding and cutting systems is fundamentally limited by beam quality and stability of focus. Since absorption in the optical components of optical systems has a detrimental effect on the laser focus shift, the beam energy loss and the resulting heating has to be minimized both in the bulk materials and at the coated surfaces. In collaboration with a laser research institute, an optical finisher and end users, photo thermal absorption measurements on coated samples of different fused silica grades were performed to investigate the influence of basic material properties on the absorption level. High purity, synthetic fused silica is as well the material of choice for optical components designed for DUV applications (wavelength range 160 nm - 260 nm). For higher light intensities, e.g. provided by Excimer lasers, UV photons may generate defect centers that effect the optical properties during usage, resulting in an aging of the optical components (UV radiation damage). Powerful Excimer lasers require optical materials that can withstand photon energy close to the band gap and the high intensity of the short pulse length. The UV transmission loss is restricted to the DUV wavelength range below 300 nm and

Dendritic cells fused with different pancreatic carcinoma cells induce different T-cell responses

Directory of Open Access Journals (Sweden)

Andoh Y

2013-01-01

Full Text Available Yoshiaki Andoh,1,2 Naohiko Makino,2 Mitsunori Yamakawa11Department of Pathological Diagnostics, 2Department of Gastroenterology, Yamagata University School of Medicine, Yamagata, JapanBackground: It is unclear whether there are any differences in the induction of cytotoxic T lymphocytes (CTL and CD4+CD25high regulatory T-cells (Tregs among dendritic cells (DCs fused with different pancreatic carcinomas. The aim of this study was to compare the ability to induce cytotoxicity by human DCs fused with different human pancreatic carcinoma cell lines and to elucidate the causes of variable cytotoxicity among cell lines.Methods: Monocyte-derived DCs, which were generated from peripheral blood mononuclear cells (PBMCs, were fused with carcinoma cells such as Panc-1, KP-1NL, QGP-1, and KP-3L. The induction of CTL and Tregs, and cytokine profile of PBMCs stimulated by fused DCs were evaluated.Results: The cytotoxicity against tumor targets induced by PBMCs cocultured with DCs fused with QGP-1 (DC/QGP-1 was very low, even though PBMCs cocultured with DCs fused with other cell lines induced significant cytotoxicity against the respective tumor target. The factors causing this low cytotoxicity were subsequently investigated. DC/QGP-1 induced a significant expansion of Tregs in cocultured PBMCs compared with DC/KP-3L. The level of interleukin-10 secreted in the supernatants of PBMCs cocultured with DC/QGP-1 was increased significantly compared with that in DC/KP-3L. Downregulation of major histocompatibility complex class I expression and increased secretion of vascular endothelial growth factor were observed with QGP-1, as well as in the other cell lines.Conclusion: The present study demonstrated that the cytotoxicity induced by DCs fused with pancreatic cancer cell lines was different between each cell line, and that the reduced cytotoxicity of DC/QGP-1 might be related to the increased secretion of interleukin-10 and the extensive induction of Tregs

Comparing monolithic and fused core HPLC columns for fast chromatographic analysis of fat-soluble vitamins

Directory of Open Access Journals (Sweden)

Kurdi Said El

2017-06-01

Full Text Available HPLC stationary phases of monolithic and fused core type can be used to achieve fast chromatographic separation as an alternative to UPLC. In this study, monolithic and fused core stationary phases are compared for fast separation of four fat-soluble vitamins. Three new methods on the first and second generation monolithic silica RP-18e columns and a fused core pentafluoro-phenyl propyl column were developed. Application of three fused core columns offered comparable separations of retinyl palmitate, DL-α-tocopheryl acetate, cholecalciferol and menadione in terms of elution speed and separation efficiency. Separation was achieved in approx. 5 min with good resolution (Rs > 5 and precision (RSD ≤ 0.6 %. Monolithic columns showed, however, a higher number of theoretical plates, better precision and lower column backpressure than the fused core column. The three developed methods were successfully applied to separate and quantitate fat-soluble vitamins in commercial products.

Incisal tooth wear and self-reported TMD pain in children and adolescents.

Science.gov (United States)

Hirsch, Christian; John, Mike T; Lobbezoo, Frank; Setz, Juergen M; Schaller, Hans-Guenter

2004-01-01

Incisal tooth wear may be a sign of long-term bruxing behavior. Bruxism is purported to be a risk factor for temporomandibular disorders (TMD). The aim of this population-based cross-sectional study was to determine if anterior tooth wear is associated with the self-report of TMD pain in children and adolescents. In a population sample of 1,011 children and adolescents (mean age 13.1 years, range 10 to 18 years; female 52%; response rate 85%), TMD cases were defined as subjects reporting pain in the face, jaw muscles, and temporomandibular joint during the last month according to RDC/TMD. All other subjects were considered controls. Incisal tooth wear was assessed in the clinical examination using a 0 to 2 scale (no wear, enamel wear, dentin wear) for every anterior permanent tooth. The mean wear score for the individuals was categorized into 0, 0.01 to 0.20, 0.21 to 0.40, and 0.41+. A multiple logistic regression analysis, controlling for the effects of age and gender, analyzed the association between the categorized summary wear score and TMD. Specifically, the hypothesis of a trend between higher tooth wear scores and higher risk of TMD was tested. An odds ratio of 1.1 indicated, after adjusting for gender and age, no statistically significantly higher risk of TMD pain with higher tooth wear scores. Incisal tooth wear was not associated with self-reported TMD pain in 10- to 18-year-old subjects.

TFAP2B mutation and dental anomalies.

Science.gov (United States)

Tanasubsinn, Natchaya; Sittiwangkul, Rekwan; Pongprot, Yupada; Kawasaki, Katsushige; Ohazama, Atsushi; Sastraruji, Thanapat; Kaewgahya, Massupa; Kantaputra, Piranit Nik

2017-08-01

Mutations inTFAP2B has been reported in patients with isolated patent ductus arteriosus (PDA) and Char syndrome. We performed mutation analysis of TFAP2B in 43 patients with isolated PDA, 7 patients with PDA with other congenital heart defects and 286 patients with isolated tooth agenesis with or without other dental anomalies. The heterozygous c.1006G>A mutation was identified in 20 individuals. Those mutation carriers consisted of 1 patient with term PDA (1/43), 16 patients with isolated tooth agenesis with or without other dental anomalies (16/286; 5.6%), 1 patient with PDA and severe valvular aortic stenosis and tooth agenesis (1/4) and 2 normal controls (2/100; 1%). The mutation is predicted to cause an amino-acid substitution p.Val336Ile in the TFAP2B protein. Tfap2b expression during early mouse tooth development supports the association of TFAP2B mutation and dental anomalies. It is hypothesized that this incidence might have been the result of founder effect. Here we report for the first time that TFAP2B mutation is associated with tooth agenesis, microdontia, supernumerary tooth and root maldevelopment. In addition, we also found that TFAP2B mutations, the common causes of PDA in Caucasian, are not the common cause of PDA in Thai population.

Thermodynamic perturbation theory for fused hard-sphere and hard-disk chain fluids

International Nuclear Information System (INIS)

Zhou, Y.; Hall, C.K.; Stell, G.

1995-01-01

We find that first-order thermodynamic perturbation theory (TPT1) which incorporates the reference monomer fluid used in the generalized Flory--AB (GF--AB) theory yields an equation of state for fused hard-sphere (FHS) chain fluids that has accuracy comparable to the GF--AB and GF--dimer--AC theories. The new TPT1 equation of state is significantly more accurate than other extensions of the TPT1 theory to FHS chain fluids. The TPT1 is also extended to two-dimensional fused hard-disk chain fluids. For the fused hard-disk dimer fluid, the extended TPT1 equation of state is found to be more accurate than the Boublik hard-disk dimer equation of state. copyright 1995 American Institute of Physics

A theropod tooth from the Late Triassic of southern Africa

Indian Academy of Sciences (India)

An isolated, large recurved and finely serrated tooth found associated with the prosauropod Euskelosaurus from the Late Triassic part of the Elliot Formation is described here. It is compared to the Triassic thecodonts and carnivorous dinosaurs and its possible affinity is discussed. The tooth possibly belongs to a basal ...

Assessment of the progression of tooth wear on dental casts

NARCIS (Netherlands)

Vervoorn-Vis, G.M.G.J.; Wetselaar, P.; Koutris, M.; Visscher, C.M.; Evälahti, M.; Ahlberg, J.; Lobbezoo, F.

2015-01-01

Many methods are available for the grading of tooth wear, but their ability to assess the progression of wear over time has not been studied frequently. The aim was to assess whether the occlusal/incisal grading scale of the Tooth Wear Evaluation System (TWES) was sensitive enough for the detection

Tooth apatite as a bone substitute: an experimental study and clinical applications

International Nuclear Information System (INIS)

Eun-Seok Kim; Pill-Hoon Choung

1999-01-01

The purpose of this study is to evaluate the usefulness of calcined teeth powder as biological apatite. The animal experiment was performed in 36 rabbits aging 6 weeks and weighing 1.6 kg. In experimental group, tooth apatite powder was implanted to 10 mm bony defects in diameter made on the cranial bone of the rabbits. As control groups, synthetic porous hydroxyapatite and resorbable type calcium carbonate were implanted to the defects of same size. Each group was sacrificed in 1, 2, 4, 6, 8, 12 weeks after the surgery. Specimens were prepared for decalcified samples and observed by a light microscope. And we also performed quantitative analysis of new bone formation through image analysis using computer. In clinical applications, we used tooth apatite alone or mixed with decalcified freeze-dried bone for reconstruction of bony defects in 15 patients undergone enucleation of cyst or ameloblastoma. The obtained results were as follows; 1) The powder of the calcined teeth was called as 'tooth apatite' and it seemed to have biocompatibility in rabbits and human. 2) In group of tooth apatite, after 4 weeks of operation, new bone directly bonded to the particles was observed. And in 12 weeks of it, new bone occupied most of the bony defects. In 6 weeks, resorption of the tooth apatite particles was observed. Thus the tooth apatite was regarded as one of resorbable apatite. 3) The group of tooth apatite showed new bone formation similar to the group of porous hydroxyapatite, but they were inferior to the group of resorbable calcium carbonate. 4) In clinical application, tooth apatite had biocompatibility and new bone formation was observed without any complication except for 1 case. So we think it is a useful bone substitute with osteoconductivity

FUSE: a profit maximization approach for functional summarization of biological networks

Directory of Open Access Journals (Sweden)

Seah Boon-Siew

2012-03-01

Full Text Available Abstract Background The availability of large-scale curated protein interaction datasets has given rise to the opportunity to investigate higher level organization and modularity within the protein interaction network (PPI using graph theoretic analysis. Despite the recent progress, systems level analysis of PPIS remains a daunting task as it is challenging to make sense out of the deluge of high-dimensional interaction data. Specifically, techniques that automatically abstract and summarize PPIS at multiple resolutions to provide high level views of its functional landscape are still lacking. We present a novel data-driven and generic algorithm called FUSE (Functional Summary Generator that generates functional maps of a PPI at different levels of organization, from broad process-process level interactions to in-depth complex-complex level interactions, through a pro t maximization approach that exploits Minimum Description Length (MDL principle to maximize information gain of the summary graph while satisfying the level of detail constraint. Results We evaluate the performance of FUSE on several real-world PPIS. We also compare FUSE to state-of-the-art graph clustering methods with GO term enrichment by constructing the biological process landscape of the PPIS. Using AD network as our case study, we further demonstrate the ability of FUSE to quickly summarize the network and identify many different processes and complexes that regulate it. Finally, we study the higher-order connectivity of the human PPI. Conclusion By simultaneously evaluating interaction and annotation data, FUSE abstracts higher-order interaction maps by reducing the details of the underlying PPI to form a functional summary graph of interconnected functional clusters. Our results demonstrate its effectiveness and superiority over state-of-the-art graph clustering methods with GO term enrichment.

Effect of Orthodontic Tooth Movement on Salivary Aspartate Aminotransferase Activity

Directory of Open Access Journals (Sweden)

Steiven Adhitya

2013-07-01

Full Text Available 72 1024x768 Aspartate aminotransferase is one of biological indicator in gingival crevicular fluid (CGF. Force orthodontic application could increase activity of aspartate aminotransferase in CGF. However, the increase activity of aspartate aminotransferase in saliva due to orthodontic force and its correlation between aspartate aminotransferase activity and tooth movement remains unclear. Objectives: To evaluate application orthodontic force on the aspartate aminotransferase activity in saliva based on the duration of force and finding correlation between tooth movement and aspartate aminotransferase activity. Methods: Twenty saliva samples collected before extraction of first premolar, at the time of force application for canine retraction and after force application. The canines retraction used 100 grams of interrupted force (module chain for thirty days. The collection of saliva and the measurement of tooth movement were carried out 1 day, 7 days, 14 days, 21 days, and 28 days after force application. The measurement of aspartate aminotransferase activity in saliva was done using spectrophotometer. Results: Application of orthodontic force influences the salivary aspartate aminotransferase activity (F=25.290, p=0.000. Furthermore, tooth movement correlated with aspartate aminotransferase activity (F=0.429, p=0.000. Conclusion: Aspartate aminotransferase activity could be used as tooth movement indicator that related to the duration of force application.DOI : 10.14693/jdi.v20i1.128

A review of heat transfer in human tooth--experimental characterization and mathematical modeling.

Science.gov (United States)

Lin, Min; Xu, Feng; Lu, Tian Jian; Bai, Bo Feng

2010-06-01

With rapid advances in modern dentistry, high-energy output instruments (e.g., dental lasers and light polymerizing units) are increasingly employed in dental surgery for applications such as laser assisted tooth ablation, bleaching, hypersensitivity treatment and polymerization of dental restorative materials. Extreme high temperature occurs within the tooth during these treatments, which may induce tooth thermal pain (TTP) sensation. Despite the wide application of these dental treatments, the underlying mechanisms are far from clear. Therefore, there is an urgent need to better understand heat transfer (HT) process in tooth, thermally induced damage of tooth, and the corresponding TTP. This will enhance the design and optimization of clinical treatment strategies. This paper presents the state-of-the-art of the current understanding on HT in tooth, with both experimental study and mathematical modeling reviewed. Limitations of the current experimental and mathematical methodologies are discussed and potential solutions are suggested. Interpretation of TTP in terms of thermally stimulated dentinal fluid flow is also discussed. Copyright (c) 2010 Academy of Dental Materials. All rights reserved.

Conversion from tooth enamel dose to organ doses for electron spin resonance dosimetry

International Nuclear Information System (INIS)

Takahashi, Fumiaki; Yamaguchi, Yasuhiro; Saito, Kimiaki; Hamada, Tatsuji

2002-01-01

Conversion from tooth enamel dose to organ doses was analyzed to establish a method of retrospective individual dose assessment against external photon exposure by electron spin resonance (ESR) dosimetry. Dose to tooth enamel was obtained by Monte Carlo calculations using a modified MIRD-type phantom with a teeth part. The calculated tooth enamel doses were verified by measurements with thermo-luminescence dosimeters inserted in a physical head phantom. Energy and angular dependences of tooth enamel dose were compared with those of other organ doses. Additional Monte Carlo calculations were performed to study the effect of human model on the tooth enamel dose with a voxel-type phantom, which was based on computed tomography images of the physical phantom. The data derived with the modified MIRD-type phantom were applied to convert from tooth enamel dose to organ doses against external photon exposure in a hypothesized field, where scattered radiation was taken into account. The results indicated that energy distribution of photons incident to a human body is required to evaluate precisely an individual dose based on ESR dosimetry for teeth. (author)

Corticotomy affects both the modus and magnitude of orthodontic tooth movement

DEFF Research Database (Denmark)

Verna, Carlalberta; Cattaneo, Paolo; Dalstra, Michel

2017-01-01

OBJECTIVE: To analyze whether the decreased bone density due to the manipulation of bone remodeling rate has an influence on the type of the planned tooth movement. MATERIALS AND METHODS: A finite element model of a lower incisor has been developed. The density of the alveolar bone surrounding th......: A decreased bone density influences not only the amount of tooth movement, but also its type. This study suggests that the moment-to-force ratios used in conventional orthodontics should be modified in case of techniques that decrease bone density to enhance tooth movement rate....

Tooth damage in captive orcas (Orcinus orca).

Science.gov (United States)

Jett, John; Visser, Ingrid N; Ventre, Jeffrey; Waltz, Jordan; Loch, Carolina

2017-12-01

Tooth damage as a result of oral stereotypies is evident in captive orca, yet little research on the topic exists. This study examines the associations between dental pathology, sex, facility, duration of captivity and other factors in captive orca. We evaluated mandibular and maxillary teeth from dental images of 29 captive orca owned by a US-based theme park. Each tooth was scored for coronal wear, wear at or below gum line and bore holes. Fractured and missing teeth were also noted. Summary statistics described the distribution and severity of pathologies; inferential statistics examined how pathologies differed between sexes, between wild-captured and captive-born orcas and between captive orca at four facilities. We also evaluated how dental pathology and duration of captivity were related. Approximately 24% of whales exhibited "major" to "extreme" mandibular coronal tooth wear, with coronal wear and wear at or below gum line highly correlated. More than 60% of mandibular teeth 2 and 3 exhibited fractures. Bore holes were observed primarily among anterior mandibular teeth, with more than 61% of teeth 2 and 3 bearing evidence of having been drilled. Four of five orca with the highest age-adjusted tooth pathology indices were captive-born. Various dental pathologies were observed across all whales, with pathologies beginning at a young age. Oral stereotypies exhibited by captive orca contributed to the observed dental damage. By making dental and health records of captive whales publicly available, the theme park industry is uniquely positioned to provide further insight into dental pathology and resultant health consequences in captive orca. Copyright © 2017 Elsevier Ltd. All rights reserved.

A hierarachical data structure representation for fusing multisensor information

Energy Technology Data Exchange (ETDEWEB)

Maren, A.J. [Tennessee Univ., Tullahoma, TN (United States). Space Inst.; Pap, R.M.; Harston, C.T. [Accurate Automation Corp., Chattanooga, TN (United States)

1989-12-31

A major problem with MultiSensor Information Fusion (MSIF) is establishing the level of processing at which information should be fused. Current methodologies, whether based on fusion at the data element, segment/feature, or symbolic levels, are each inadequate for robust MSIF. Data-element fusion has problems with coregistration. Attempts to fuse information using the features of segmented data relies on a Presumed similarity between the segmentation characteristics of each data stream. Symbolic-level fusion requires too much advance processing (including object identification) to be useful. MSIF systems need to operate in real-time, must perform fusion using a variety of sensor types, and should be effective across a wide range of operating conditions or deployment environments. We address this problem through developing a new representation level which facilitates matching and information fusion. The Hierarchical Data Structure (HDS) representation, created using a multilayer, cooperative/competitive neural network, meets this need. The HDS is an intermediate representation between the raw or smoothed data stream and symbolic interpretation of the data. it represents the structural organization of the data. Fused HDSs will incorporate information from multiple sensors. Their knowledge-rich structure aids top-down scene interpretation via both model matching and knowledge-based region interpretation.

A hierarachical data structure representation for fusing multisensor information

Energy Technology Data Exchange (ETDEWEB)

Maren, A.J. (Tennessee Univ., Tullahoma, TN (United States). Space Inst.); Pap, R.M.; Harston, C.T. (Accurate Automation Corp., Chattanooga, TN (United States))

1989-01-01

A major problem with MultiSensor Information Fusion (MSIF) is establishing the level of processing at which information should be fused. Current methodologies, whether based on fusion at the data element, segment/feature, or symbolic levels, are each inadequate for robust MSIF. Data-element fusion has problems with coregistration. Attempts to fuse information using the features of segmented data relies on a Presumed similarity between the segmentation characteristics of each data stream. Symbolic-level fusion requires too much advance processing (including object identification) to be useful. MSIF systems need to operate in real-time, must perform fusion using a variety of sensor types, and should be effective across a wide range of operating conditions or deployment environments. We address this problem through developing a new representation level which facilitates matching and information fusion. The Hierarchical Data Structure (HDS) representation, created using a multilayer, cooperative/competitive neural network, meets this need. The HDS is an intermediate representation between the raw or smoothed data stream and symbolic interpretation of the data. it represents the structural organization of the data. Fused HDSs will incorporate information from multiple sensors. Their knowledge-rich structure aids top-down scene interpretation via both model matching and knowledge-based region interpretation.

Toxicity of inhaled 144Ce fused clay particles in beagle dogs. VII

International Nuclear Information System (INIS)

Hahn, F.F.; Boecker, B.B.; Hobbs, C.H.; Jones, R.K.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1974-01-01

The metabolism, dosimetry, and effects of inhaled 144 Ce in fused clay particles are being investigated in the Beagle dog to aid in assessing the biological consequences of release of 144 Ce in a relatively insoluble form such as might occur in certain types of nuclear accidents. The toxicity of inhaled 144 Ce fused clay is also of general interest since it is representative of intermediate-lived beta-emitting radionuclides. Two major studies with young adult dogs (12 to 14 months of age at exposure) are involved: (1) a metabolism and dosimetry study in which 24 dogs were serially sacrificed over an extended period of time, and (2) a longevity study with 2 series of dogs; Series I with 15 dogs exposed to aerosols of 144 Ce in fused clay particles to yield initial lung burdens of 11 to 210 μCi/kg body weight and 3 control dogs exposed to nonradioactive fused clay particles and Series II with 96 dogs exposed to aerosols of 144 Ce in fused clay particles to yield initial lung burdens of 0.0024 to 66 μCi/kg body weight and 12 control dogs exposed to nonradioactive fused clay particles. Twenty-eight dogs died or were euthanized at 143 to 2396 days after inhalation of 144 Ce. The prominent findings were radiation pneumonitis in 17 dogs that died or were euthanized at early time periods and neoplastic disease in 10 of the 11 dogs that died or were euthanized at 750 days or later; 5 with hemangiosarcoma of the lung, 1 with both a hemangiosarcoma and a fibrosarcoma of the lung, 1 with both a bronchiolo-alveolar carcinoma and a hemangiosarcoma of lung, 1 with a hemangiosarcoma of lung, bronchiolo-alveolar carcinoma, and a bronchiogenic adenocarcinoma, and 1 each with a hemangiosarcoma of the mediastinum and of the spleen. The cumulative radiation dose to the lung at time of death has ranged from 22,000 to 140,000 rads. Serial observations are continuing on the 83 survivors and 15 controls. (U.S.)

The Nance-Horan syndrome: a rare X-linked ocular-dental trait with expression in heterozygous females.

Science.gov (United States)

Bixler, D; Higgins, M; Hartsfield, J

1984-07-01

This report describes two families with the Nance-Horan syndrome, an X-linked trait featuring lenticular cataracts and anomalies of tooth shape and number. Previous reports have described blindness in affected males but posterior sutural cataracts with normal vision as the primary ocular expression in heterozygous females. In one of these two families, the affected female is not only blind in one eye but reportedly had supernumerary central incisors (mesiodens) removed. This constitutes the most severe ocular and dental expression of this gene in heterozygous females yet reported.

Phenotypic spectrum of dynamin 2 mutations in Charcot-Marie-Tooth neuropathy

NARCIS (Netherlands)

Claeys, Kristl G.; Züchner, Stephan; Kennerson, Marina; Berciano, José; Garcia, Antonio; Verhoeven, Kristien; Storey, Elsdon; Merory, John R.; Bienfait, Henriette M. E.; Lammens, Martin; Nelis, Eva; Baets, Jonathan; de Vriendt, Els; Berneman, Zwi N.; de Veuster, Ilse; Vance, Jefferey M.; Nicholson, Garth; Timmerman, Vincent; de Jonghe, Peter

2009-01-01

Dominant intermediate Charcot-Marie-Tooth neuropathy type B is caused by mutations in dynamin 2. We studied the clinical, haematological, electrophysiological and sural nerve biopsy findings in 34 patients belonging to six unrelated dominant intermediate Charcot-Marie-Tooth neuropathy type B

Three-port beam splitter of a binary fused-silica grating.

Science.gov (United States)

Feng, Jijun; Zhou, Changhe; Wang, Bo; Zheng, Jiangjun; Jia, Wei; Cao, Hongchao; Lv, Peng

2008-12-10

A deep-etched polarization-independent binary fused-silica phase grating as a three-port beam splitter is designed and manufactured. The grating profile is optimized by use of the rigorous coupled-wave analysis around the 785 nm wavelength. The physical explanation of the grating is illustrated by the modal method. Simple analytical expressions of the diffraction efficiencies and modal guidelines for the three-port beam splitter grating design are given. Holographic recording technology and inductively coupled plasma etching are used to manufacture the fused-silica grating. Experimental results are in good agreement with the theoretical values.

Cavity Formation Modeling of Fiber Fuse in Single-Mode Optical Fibers

Directory of Open Access Journals (Sweden)

Yoshito Shuto

2017-01-01

Full Text Available The evolution of a fiber-fuse phenomenon in a single-mode optical fiber was studied theoretically. To clarify both the silica-glass densification and cavity formation, which have been observed in fiber fuse propagation, we investigated a nonlinear oscillation model using the Van Der Pol equation. This model was able to phenomenologically explain both the densification of the core material and the formation of periodic cavities in the core layer as a result of a relaxation oscillation.

Three dimensional mathematical model of tooth for finite element analysis

Directory of Open Access Journals (Sweden)

Puškar Tatjana

2010-01-01

Full Text Available Introduction. The mathematical model of the abutment tooth is the starting point of the finite element analysis of stress and deformation of dental structures. The simplest and easiest way is to form a model according to the literature data of dimensions and morphological characteristics of teeth. Our method is based on forming 3D models using standard geometrical forms (objects in programmes for solid modeling. Objective. Forming the mathematical model of abutment of the second upper premolar for finite element analysis of stress and deformation of dental structures. Methods. The abutment tooth has a form of a complex geometric object. It is suitable for modeling in programs for solid modeling SolidWorks. After analyzing the literature data about the morphological characteristics of teeth, we started the modeling dividing the tooth (complex geometric body into simple geometric bodies (cylinder, cone, pyramid,.... Connecting simple geometric bodies together or substricting bodies from the basic body, we formed complex geometric body, tooth. The model is then transferred into Abaqus, a computational programme for finite element analysis. Transferring the data was done by standard file format for transferring 3D models ACIS SAT. Results. Using the programme for solid modeling SolidWorks, we developed three models of abutment of the second maxillary premolar: the model of the intact abutment, the model of the endodontically treated tooth with two remaining cavity walls and the model of the endodontically treated tooth with two remaining walls and inserted post. Conclusion Mathematical models of the abutment made according to the literature data are very similar with the real abutment and the simplifications are minimal. These models enable calculations of stress and deformation of the dental structures. The finite element analysis provides useful information in understanding biomechanical problems and gives guidance for clinical research.

Generation of gear tooth surfaces by application of CNC machines

Science.gov (United States)

Litvin, F. L.; Chen, N. X.

1994-01-01

This study will demonstrate the importance of application of computer numerically controlled (CNC) machines in generation of gear tooth surfaces with new topology. This topology decreases gear vibration and will extend the gear capacity and service life. A preliminary investigation by a tooth contact analysis (TCA) program has shown that gear tooth surfaces in line contact (for instance, involute helical gears with parallel axes, worm gear drives with cylindrical worms, etc.) are very sensitive to angular errors of misalignment that cause edge contact and an unfavorable shape of transmission errors and vibration. The new topology of gear tooth surfaces is based on the localization of bearing contact, and the synthesis of a predesigned parabolic function of transmission errors that is able to absorb a piecewise linear function of transmission errors caused by gear misalignment. The report will describe the following topics: description of kinematics of CNC machines with six degrees of freedom that can be applied for generation of gear tooth surfaces with new topology. A new method for grinding of gear tooth surfaces by a cone surface or surface of revolution based on application of CNC machines is described. This method provides an optimal approximation of the ground surface to the given one. This method is especially beneficial when undeveloped ruled surfaces are to be ground. Execution of motions of the CNC machine is also described. The solution to this problem can be applied as well for the transfer of machine tool settings from a conventional generator to the CNC machine. The developed theory required the derivation of a modified equation of meshing based on application of the concept of space curves, space curves represented on surfaces, geodesic curvature, surface torsion, etc. Condensed information on these topics of differential geometry is provided as well.

Relationship and inter observer agreement of tooth and face forms in a Saudi subpopulation.

Science.gov (United States)

Habib, Syed Rashid; Shiddi, Ibraheem Al; Al-Sufyani, Mohammed D; Althobaiti, Fahad A

2015-04-01

To determine the relationship of tooth form with the face form by different observers and further investigate the inter observer agreement on tooth forms, face forms, their relationship among male Saudis. A comparative cross-sectional study. Department of Prosthodontics, College of Dentistry, King Saud University, Riyadh, KSA, from February till August 2013. Ninety four male participants aged 18 - 35 years were randomly recruited for the study. Full-face and anterior teeth (intraoral) digital photographs in the frontal plane were recorded. The outline tracings of the face and the tooth were obtained using Autocad (version 2010) software. The outline of the tooth was enlarged proportionately, without altering the length to width ratio to fit the face outline. The outlines were then evaluated visually by 6 prosthodontists and results were tabulated. The most common type of face form (49.65%) and tooth form (56.38%) was square tapering. Using the visual method, a good relationship (31.41%), moderate relationship (35.31%), weak relationship (19.68%) and no relationship (13.65%) between the tooth form and face form was found by the observers. Overall kappa for inter observer agreement on face form, tooth form and their relationship was 0.24, 0.17 and 0.26 respectively. The kappa values showed a fair agreement between the observers. The study results indicated that there was no highly defined relationship between the tooth form and face form in the studied Saudi subpopulation. A fair agreement was found between the observers for classifying the tooth forms, face froms and their relationship.

Prenatal diagnosis of monocephalic bifacial tetraophthalmic diprosopus (conjoined twin).

Science.gov (United States)

Dhaifalah, I; Curtisova, V; Santavy, J

2008-01-01

A case of diprosopus twinning which is rare conjoined twinning is reported prenatally at 22 weeks' gestation. 2D ultrasound examinations showed duplication of the craniofacial structures with four hemispheres, two cerebella and two thalami. There were three orbits two external ears, two noses, fused adjacent maxilla and two oral cavities with two fused oral opening and two jaws. The woman did not consent to any further investigations and the pregnancy was terminated. The postmortem examination confirmed the diagnosis in a male fetus with a crown-rump length of 155 mm, weighing 450 g. The body appeared normal except for a small poorly formed rudiment of a supernumerary digit next to the thumb of the right hand. The ultrasound examination and postmortem finding of this case is described with a short review of the literature. (c) 2007 S. Karger AG, Basel

Surgical treatments of the impacted canine tooth in young dogs

International Nuclear Information System (INIS)

Amimoto, A.; Iwamoto, S.; Hachimura, H.; Sasaki, K.; Taura, Y.; Nakama, S.; Yamanouchi, T.

1993-01-01

Surgical treatments of the impacted canine tooth were carried out in 8 young dogs, and the results were successful in 12 out of 14 cases (85.7%). The treatments consisting of surgical correction by immediate tipping movement, fenestration of the gingiva, and removal of the impacted tooth, were applied to 14 cases radiographically showing the immature tooth root and no abnormalities in the tooth root or alveolar bone. Impacted teeth were seen in 8 regions of the maxilla and 6 regions of the mandible. Mesioversion was seen in almost all maxillary impacted teeth, while linguoversion or lingual mesioversion in all mandibular cases. Surgical correction was carried out by immediate tipping movement after removal of the retained deciduous canine with or without resection of the alveolar bone. Fixation of the moved teeth was done using a wedge made from the deciduous canine root, which was driven into the vacant alveolar cavity after moving. An additional fixation using a steel wire and/or self-curing resin was done, if necessary

Enamel subsurface damage due to tooth preparation with diamonds.

Science.gov (United States)

Xu, H H; Kelly, J R; Jahanmir, S; Thompson, V P; Rekow, E D

1997-10-01

In clinical tooth preparation with diamond burs, sharp diamond particles indent and scratch the enamel, causing material removal. Such operations may produce subsurface damage in enamel. However, little information is available on the mechanisms and the extent of subsurface damage in enamel produced during clinical tooth preparation. The aim of this study, therefore, was to investigate the mechanisms of subsurface damage produced in enamel during tooth preparation by means of diamond burs, and to examine the dependence of such damage on enamel rod orientation, diamond particle size, and removal rate. Subsurface damage was evaluated by a bonded-interface technique. Tooth preparation was carried out on two enamel rod orientations, with four clinical diamond burs (coarse, medium, fine, and superfine) used in a dental handpiece. The results of this study showed that subsurface damage in enamel took the form of median-type cracks and distributed microcracks, extending preferentially along the boundaries between the enamel rods. Microcracks within individual enamel rods were also observed. The median-type cracks were significantly longer in the direction parallel to the enamel rods than perpendicular to the rods. Preparation with the coarse diamond bur produced cracks as deep as 84 +/- 30 microns in enamel. Finishing with fine diamond burs was effective in crack removal. The crack lengths in enamel were not significantly different when the removal rate was varied. Based on these results, it is concluded that subsurface damage in enamel induced by tooth preparation takes the form of median-type cracks as well as inter- and intra-rod microcracks, and that the lengths of these cracks are sensitive to diamond particle size and enamel rod orientation, but insensitive to removal rate.

AUTOGENOUS TOOTH TRANSPLANTATION IN ADULT ...

African Journals Online (AJOL)

drclement

ABSTRACT. A case of autotransplantation of a tooth in a 26 year old female African cleft palate patient is reported. This case report emphasizes the possibility and success of autotransplantation in our centre, it also emphasizes that transplantation is only technique sensitive but less equipment sensitive. It further stresses.

Natural Tooth Pontic: An Instant Esthetic Option for Periodontally Compromised Teeth—A Case Series

Directory of Open Access Journals (Sweden)

Rishi Raj

2016-01-01

Full Text Available Sudden tooth loss in the esthetic zone of the maxillary or mandibular anterior region can be due to trauma, periodontal disease, or endodontic failure. The treatment options for replacing the missing tooth can vary between removable prosthesis, tooth-supported prosthesis, and implant-supported prosthesis. Irrespective of the final treatment, the first line of management would be to provisionally restore the patient’s esthetic appearance at the earliest, while functionally stabilizing the compromised arch. Using the patient’s own natural tooth as a pontic offers the benefits of being the right size, shape, and color and provides exact repositioning in its original intraoral three-dimensional position. Additionally, using the patient’s platelet concentrate (platelet rich fibrin facilitates early wound healing and preservation of alveolar ridge shape following tooth extraction. The abutment teeth can also be preserved with minimal or no preparation, thus keeping the technique reversible, and can be completed at the chair side thereby avoiding laboratory costs. This helps the patient better tolerate the effect of tooth loss psychologically. The article describes a successful, immediate, and viable technique for rehabilitation of three different patients requiring replacement of a single periodontally compromised tooth in an esthetic region.

FACTORS RELATED TO TOOTH LOSS AMONG INDUSTRIAL WORKERS IN PHATHUM THANI, THAILAND.

Science.gov (United States)

Jaaidee, Jeerateep; Chatrchaiwiwatana, Supaporn; Ratanasiri, Amornrat

2017-01-01

Tooth loss is an important oral health problem among Thai people. The objectives of this study were to evaluate the prevalence of and factors associated with tooth loss among Thai industrial workers in order to apply preventive oral health programs to this population. The study consisted of 1,500 adults working in Nava Nakorn Industrial Estate, Pathum Thani Province, Thailand in 2014. Probability proportion to size cluster sampling was used and 16 clusters were included in the study. An oral health questionnaire was developed, evaluated for content validity by experts and then given to participants to fill out. The study population consisted of 621 males (41.4%) and 879 females (58.6%) aged between 19-25 years. The overall prevalence of tooth loss was 62.2% and the major reason for tooth loss was dental caries (60%). Results from multivariable logistic regression analysis show that factors associated with tooth loss were: having a history of scaling or tooth cleaning [adjusted odds ratio (AOR)= 2.47; 95% CI: 1.21-4.65], having dental caries with exposed pulp (AOR=4.12; 95% CI: 3.26-7.67), having tooth mobility due to periodontal disease (AOR=2.41; 95% CI: 2.71-5.22), having needed tooth restoration (AOR=1.75; 95% CI: 1.23-2.65), having a history of maxillofacial or a temporo-mandibular joint accident (AOR=2.13; 95% CI: 1.87- 3.23), wearing dentures (AOR=2.58; 95% CI: 2.17-6.72), using dental care services during the previous year (AOR=2.21; 95% CI: 1.26-4.57), eating snacks and candy daily (AOR=2.14; 95% CI: 1.82-2.92), having toothache (AOR=2.64; 95% CI: 1.43- 3.92), having dental caries (AOR=2.23; 95% CI: 1.62-3.27) and having a history of orthodontic treatment (AOR=3.61; 95% CI: 1.84-5.68). The Nagelkerke R squared for the model was 0.42. Our findings suggest several clinical, socio-economic and lifestyle factors are associated with tooth loss among these Thai industrial workers. An appropriate preventive oral health program targeting this high-risk group taking

Fusing Intelligence With Law Enforcement Information: An Analytic Imperative

National Research Council Canada - National Science Library

Thornlow, Christopher C

2005-01-01

... and Law Enforcement Communities to fuse and analyze foreign threat intelligence with domestic law enforcement information in a timely fashion to provide adequate indications and warning of such an...

New developments in fused deposition modeling of ceramics

DEFF Research Database (Denmark)

Bellini, Anna; Shor, L.; Guceri, S.I.

2005-01-01

Purpose - To shift from rapid prototyping (RP) to agile fabrication by broadening the material selection, e.g. using ceramics, hence improving the properties (e.g. mechanical properties) of fused deposition modeling (FDM) products. Design/methodology/approach - This paper presents the development...

Reasons for tooth mortality as perceived by dental professionals in ...

African Journals Online (AJOL)

Conclusion: The results of the present study suggest that among the patients attending dental clinics and hospitals in Udaipur city, dental caries and periodontal disease was found to be the two major causes of tooth mortality. This is probably the first study to report on the trends in tooth loss in general practice in Udaipur ...

Prosthetic clone and natural human tooth comparison by speckle interferometry

Science.gov (United States)

Slangen, Pierre; Corn, Stephane; Fages, Michel; Raynal, Jacques; Cuisinier, Frederic J. G.

2010-09-01

New trends in dental prosthodontic interventions tend to preserve the maximum of "body" structure. With the evolution of CAD-CAM techniques, it is now possible to measure "in mouth" the remaining dental tissues. The prosthetic crown is then designed using this shape on which it will be glued on, and also by taking into account the contact surface of the opposite jaw tooth. Several theories discuss on the glue thickness and formulation, but also on the way to evolve to a more biocompatible crown and also new biomechanical concepts. In order to validate these new concepts and materials, and to study the mechanical properties and mechanical integrity of the prosthesis, high resolution optical measurements of the deformations of the glue and the crown are needed. Samples are two intact premolars extracted for orthodontics reasons. The reference sample has no modifications on the tooth while the second sample tooth is shaped to receive a feldspathic ceramic monoblock crown which will be glued. This crown was manufactured with a chairside CAD-CAM system from an intra-oral optical print. The software allows to realize a nearly perfect clone of the reference sample. The necessary space for the glue is also entered with ideal values. This duplication process yields to obtain two samples with identical anatomy for further processing. The glue joint thickness can also be modified if required. The purpose is to compare the behaviour of a natural tooth and its prosthetic clone manufactured with "biomechanical" concepts. Vertical cut samples have been used to deal with planar object observation, and also to look "inside" the tooth. We have developed a complete apparatus enabling the study of the compressive mechanical behaviour of the concerned tooth by speckle interferometry. Because in plane displacements are of great interest for orthodontic measurements1, an optical fiber in-plane sensitive interferometer has been designed. The fibers are wrapped around piezoelectric

In phantom dosimetric response of tooth enamel to neutrons

International Nuclear Information System (INIS)

Fattibene, P.; Angelone, M.; Pillon, M.; De Coste, V.

2004-01-01

Electron Paramagnetic Resonance dosimetry based on tooth enamel has one important application in dose reconstruction of nuclear plant workers, where the contribution of neutrons to individual dose is often important. Evaluation of tooth enamel response to neutrons is thus an important goal. A few experimental data at thermal and fast neutron energies are available. A first evaluation of the tooth enamel relative response to 60 Co in monoenergetic neutron flux of 2.8 and of 14 MeV, published elsewhere, has provided results apparently non-consistent with the results obtained at lower and higher energies. A comparison of those results in the 2.8 and 14 MeV beams with those available in the literature for other beams is reported and possible reasons for incongruities are discussed. Dose conversion factors of enamel to the water and air are also calculated and reported. (authors)

A comparative clinical, pathological, biochemical and genetic study of fused in sarcoma proteinopathies

DEFF Research Database (Denmark)

Lashley, Tammaryn; Rohrer, Jonathan D; Bandopadhyay, Rina

2011-01-01

Neuronal intermediate filament inclusion disease and atypical frontotemporal lobar degeneration are rare diseases characterized by ubiquitin-positive inclusions lacking transactive response DNA-binding protein-43 and tau. Recently, mutations in the fused in sarcoma gene have been shown to cause...... findings, as well as genetic and biochemical data in 14 fused in sarcoma proteinopathy cases. In this cohort, the age of onset was variable but included cases of young-onset disease. Patients with atypical frontotemporal lobar degeneration with ubiquitinated inclusions all presented with behavioural...... familial amyotrophic lateral sclerosis and fused in sarcoma-positive neuronal inclusions have subsequently been demonstrated in neuronal intermediate filament inclusion disease and atypical frontotemporal lobar degeneration with ubiquitinated inclusions. Here we provide clinical, imaging, morphological...

Sodium hyaluronate accelerates the healing process in tooth sockets of rats.

Science.gov (United States)

Mendes, Renato M; Silva, Gerluza A B; Lima, Miguel F; Calliari, Marcelo V; Almeida, Alvair P; Alves, José B; Ferreira, Anderson J

2008-12-01

In this study we evaluated the effects of sodium hyaluronate (HY) in the healing process of tooth sockets of rats. Immediately after the extraction of the upper first molars of male Holtzman rats, right sockets were treated with 1% HY gel (approximately 0.1 ml), while left sockets were used as control (blood clot). The animals were sacrificed at 2, 7, and 21 days after tooth extraction and upper maxillaries processed for histological and morphometric analysis of the apical and medium thirds of the sockets. Carbopol, an inert gel, was used to evaluate the mechanical effect of gel injection into sockets. Expression of bone morphogenetic protein-2 (BMP-2) and osteopontin (OPN) was determined by immunohistochemistry at 1, 2, 3, 4, 5, and 7 days after tooth extraction. Histological analysis showed that HY treatment induced earlier trabecular bone deposition resulting in a bone matrix more organized at 7 and 21 days after tooth extraction. Also, HY elicited significant increase in the amount of bone trabeculaes at 7 and 21 days after tooth extraction (percentage of trabecular bone area at 7 days: 13.21+/-4.66% vs. 2.58+/-1.36% in the apical third of control sockets) and in the vessels counting at 7 days. Conversely, the number of cell nuclei was decreased in HY-treated sockets. Additionally, expression of BMP-2 and OPN was enhanced in HY-treated sockets compared with control sockets. These findings suggest that HY accelerates the healing process in tooth sockets of rats stimulating the expression of osteogenic proteins.

Benign versus malignant osseous lesions in spine: differentiation by means of bone SPECT/CT fused image

International Nuclear Information System (INIS)

Yao Zhiming; Qu Wanying

2004-01-01

This study compared the efficiency of SPECT-CT fused image with planar bone scan, bone SPECT and CT in differentiating malignant from benign lesions and detecting metastases to the spine. Methods. Total 144 patients with spinal lesions underwent planar bone scan (WB), single photon tomography (SPECT), CT and SPECT-CT fused image by a SPECT/CT system. The malignant or benign nature of lesions was proved by radiological Methods, histological findings, 6-24 month follow-up, or all of these. The diagnostic results was divided into 4 types, i.e., normal, benign, doubtful malignant and malignant. Results. There were 137 malignant and 252 benign lesions in 144 patients, respectively. The percentages of doubtful malignant diagnosed by WB, SPECT, CT and fused image are 22.6%, 5.1%, 9.5% and 0%, respectively, p < 0.01-0.001, except for the comparison between the percentages of SPECT and CT. Sensitivities in detection of malignant lesions by WB, SPECT, CT and fused image are 75.2%, 94.2%, 96.6% and 99.3%, respectively, P < 0.001, excepting for the comparisons between those of SPECT and CT, and between those of CT and fused image. The sensitivities m detection of benign lesions by WB, SPECT, CT and fused image are, 56.7%, 86.5%, 90.1% and 96.8%, respectively, P < 0.005 - 0.001, excepting for the comparison between those of SPECT and CT. The specificities in detection of maliganant lesions by WB, SPECT, CT and fused image are 70.6%, 88.9%, 97.2% and 97.6%, respectively, P < 0.001, excepting for the comparison between those of CT and fused image. Conclusion. Bone SPECT-CT fused image has highest diagnostic and differentiating diagnostic values in detection of spinal abnormalities over the planar bone scanning and SPECT. The CT by present SPECT/CT system can complement planar bone scanning and SPECT and is clinically valuable in detection of spinal abnormalities. (authors)

Estimation of Tooth Size Discrepancies among Different Malocclusion Groups

OpenAIRE

Hasija, Narender; Bala, Madhu; Goyal, Virender

2014-01-01

ABSTRACT Regards and Tribute: Late Dr Narender Hasija was a mentor and visionary in the light of knowledge and experience. We pay our regards with deepest gratitude to the departed soul to rest in peace. Bolton’s ratios help in estimating overbite, overjet relationships, the effects of contemplated extractions on posterior occlusion, incisor relationships and identification of occlusal misfit produced by tooth size discrepancies. Aim: To determine any difference in tooth size discrepancy in a...

Interactive effects of periodontitis and orthodontic tooth movement on dental root resorption, tooth movement velocity and alveolar bone loss in a rat model.

Science.gov (United States)

Kirschneck, Christian; Fanghänel, Jochen; Wahlmann, Ulrich; Wolf, Michael; Roldán, J Camilo; Proff, Peter

2017-03-01

Many adult orthodontic patients suffer from chronic periodontitis with recurrent episodes of active periodontal inflammation. As their number is steadily increasing, orthodontists are more and more frequently challenged by respective treatment considerations. However, little is currently known regarding interactive effects on undesired dental root resorption (DRR), tooth movement velocity, periodontal bone loss and the underlying cellular and tissue reactions. A total of 63 male Fischer344 rats were used in three consecutive experiments employing 21 animals each (A/B/C), randomly assigned to 3 experimental groups (n=7, 1/2/3), respectively: (A) CBCT; (B) histology/serology; (C) RT-qPCR-(1) control; (2) orthodontic tooth movement (OTM) of the first/second upper left molars (NiTi coil spring, 0.25N); (3) OTM with experimentally induced periodontitis (cervical silk ligature). After 14days of OTM, we quantified blood leukocyte level, DRR, osteoclast activity and relative gene expression of inflammatory and osteoclast marker genes within the dental-periodontal tissue as well as tooth movement velocity and periodontal bone loss after 14 and 28 days. The experimentally induced periodontal bone loss was significantly increased by concurrent orthodontic force application. Periodontal inflammation during OTM on the other hand significantly augmented the extent of DRR, relative expression of inflammatory/osteoclast marker genes, blood leukocyte level and periodontal osteoclast activity. In addition, contrary to previous studies, we observed a significant increase in tooth movement velocity. Although accelerated tooth movement would be favourable for orthodontic treatment, our results suggest that orthodontic interventions should only be performed after successful systematic periodontal therapy and paused in case of recurrent active inflammation. Copyright © 2016 Elsevier GmbH. All rights reserved.

Canine tooth size and fitness in male mandrills (Mandrillus sphinx).

Science.gov (United States)

Leigh, Steven R; Setchell, Joanna M; Charpentier, Marie; Knapp, Leslie A; Wickings, E Jean

2008-07-01

Sexual selection theory explains the evolution of exaggerated male morphologies and weaponry, but the fitness consequences of developmental and age-related changes in these features remain poorly understood. This long-term study of mandrill monkeys (Mandrillus sphinx) demonstrates how age-related changes in canine tooth weaponry and adult canine size correlate closely with male lifetime reproductive success. Combining long-term demographic and morphometric data reveals that male fitness covaries simply and directly with canine ontogeny, adult maximum size, and wear. However, fitness is largely independent of other somatometrics. Male mandrills sire offspring almost exclusively when their canines exceed approximately 30 mm, or two-thirds of average adult value (45 mm). Moreover, sires have larger canines than nonsires. The tooth diminishes through wear as animals age, corresponding with, and perhaps influencing, reproductive senescence. These factors combine to constrain male reproductive opportunities to a brief timespan, defined by the period of maximum canine length. Sexually-selected weaponry, especially when it is nonrenewable like the primate canine tooth, is intimately tied to the male life course. Our analyses of this extremely dimorphic species indicate that sexual selection is closely intertwined with growth, development, and aging, pointing to new directions for sexual selection theory. Moreover, the primate canine tooth has potential as a simple mammalian system for testing genetically-based models of aging. Finally, the tooth may record details of life histories in fossil primates, especially when sexual selection has played a role in the evolution of dimorphism.

Ancient DNA: Saber-Toothed Cats Are the Same Beasts After All.

Science.gov (United States)

Meachen, Julie A

2017-11-06

Ancient DNA from the saber-toothed cat Homotherium reveals that the late Pleistocene species from Europe and North America were the same. Homotherium turns out to be only distantly related to the well-known saber-toothed Smilodon. Copyright © 2017 Elsevier Ltd. All rights reserved.

A system for the non-destructive detection of faults in safety fuses using radioisotopes

International Nuclear Information System (INIS)

Goncalves, D.

1980-01-01

Design of an equipment for on line detection of faults in the safety fuses for conventional explosives employing transmission of #betta#-radiation is reported. The faults are detected by an ion-chamber based on the variation of the intensity of the beta particles transmitted through the fuse during its passage across the collimated beam. Strontium-90 encapsulated in stainless steel or aluminum is used as the #betta#-source. An electrical signal corresponding the fault is obtained by subtraction of an external current, that is equivalent to the output of the ion-chamber in the presence of faultless fuse. (Author) [pt

HVI Ballistic Limit Charaterization of Fused Silica Thermal Pane

Science.gov (United States)

Bohl, William E.; Miller, Joshua E.; Christiansen, Eric L.; Deighton, Kevin.; Davis, Bruce

2015-01-01

The Orion spacecraft's windows are exposed to the micrometeroid and orbital debris (MMOD) space environments while in space as well as the Earth entry environment at the mission's conclusion. The need for a low-mass spacecraft window design drives the need to reduce conservatism when assessing the design for loss of crew due to MMOD impact and subsequent Earth entry. Therefore, work is underway at NASA and Lockheed Martin to improve characterization of the complete penetration ballistic limit of an outer fused silica thermal pane. Hypervelocity impact tests of the window configuration at up to 10 km/s and hydrocode modeling have been performed with a variety of projectile materials to enable refinement of the fused silica ballistic limit equation.

The Tooth and Skin Colour Interrelationship across the Different Ethnic Groups.

Science.gov (United States)

Haralur, Satheesh B; Dibas, Ahmed Mohammed; Almelhi, Nabil Abdullah; Al-Qahtani, Dhafer Ali

2014-01-01

Objectives. The purpose of the study was to investigate the relation between skin and tooth colour parameters in various ethnic groups. Materials and Methods. Saudi Arabian, Indian, African, and East Asian ethnic groups of 75 each were included in the study. The tooth colour was determined by spectrophotometer in CIELAB parameters. The skin colour was measured at earlobe, forehead, and malar locations by clinical skin photography. The data was statistically analysed by one-way ANOVA and correlation tests. Results. The "L" vale for the Saudi Arabian group had a strong correlation at earlobe location (r = 0.275), while correlation was found at forehead (r = 0.271) and malar region (r = 0.261) with Indian ethnic group. A strong negative correlation was observed in African ethnic group at all three locations for "L" parameter. The redness value "a" is found to have strong negative linear correlation between the earlobe and tooth for Saudi Arabian (r = -0.240) and Indian ethnic groups (r = -0.268). The "b" showed no correlation with skin location in all groups except positive correlation in African ethnic groups. Conclusions. The strong correlation was found between the skin and tooth colour parameters; hence the skin colour can be used as a guide for artificial tooth selection in edentulous patients.

Dosimetric response evaluation of tooth enamel for accelerator-based neutron radiation

International Nuclear Information System (INIS)

Khan, R.F.H.; Rink, W.J.; Boreham, D.R.

2003-01-01

To study the neutron response of human tooth enamel, a number of experiments with an accelerator-based neutron source have been designed. The neutron beam was produced with the low gamma yield, 7 Li(p,n) 7 Be type thick target, using the 3 MV McMaster K.N. Van de Graaff accelerator. The dosimetry was done using a pre-calibrated snoopy type neutron dosimeter. Neutron irradiation induces a dosimetric signal in the tooth enamel at the same defect site as gamma produced damage with the same g-values (g parallel =1.9973, width 0.4 mT g perpendicular =2.002, width 0.3 mT). The dosimetric signal grows linearly with neutron dose from 6-35 Gy tissue dose. Dosimetric response in two different grain sizes (300-500 μm, and grains <4 mm) has shown increased dosimetric amplitude in the larger grains. Dose build up effect on tooth inside the mouth due to cheek was simulated by placing a 4 mm thick paraffin wax layer between the beam and tooth, but had little effect. These results show that for mean neutron energy of 280 keV, the relative neutron response of the human tooth enamel ranges from 8% to 12% of the equivalent gamma ray response

Methodic of the gamma-rays absorbed dose measurements on tooth enamel

International Nuclear Information System (INIS)

Linev, S.V.; Muravskij, V.A.; Mashevskij, A.A.; Ugolev, I.I.

1997-01-01

The analysis of the metrological aspects of the tooth enamel ESR dosimetry has been done. The sample preparation and measurement methods have been elaborated. The methods have passed metrological certification. The methods include tabletting of the mixture of tooth enamel powder and MnO paramagnetic centres concentration additional standard, two loops of additional irradiation of samples by 1 Gy dose and ESR-spectra measurements, calculation of absorbed dose by maximum likelihood algorithm. The algorithm of dose calculation uses enamel spectrum model with axial anisotropic spin-Hamiltonian based on 126 spectra of enamel samples. The algorithm takes into account spectra of the empty cavity, the tube for a sample, the glue and MnO standard. Certificated ESR-station is based on the ESR-analyser PS-100X. ESR-station provides tooth enamel absorbed dose measurements from 0.05 to 0.25 Gy with error 35%, and from 0.25 to 3 Gy with error 20%. The set of tooth enamel absorbed dose standard samples has been created and certificated for the purposes of ESR-station testing and certification. The set consists of 12 tabletted samples of tooth enamel irradiated by doses from 0.05 to 4 Gy. (authors). 7 refs., 1 tab., 2 figs

Retrospective dosimetry assessment using the 380 deg. C thermoluminescence peak of tooth enamel

Energy Technology Data Exchange (ETDEWEB)

Secu, C.E. [National Institute for Materials Physics, PO Box MG-7, 77125 Bucharest-Magurele (Romania); Cherestes, M. [Dozimed Ltd., Dosimetry Laboratory, 77125 Bucharest-Magurele (Romania); Secu, M., E-mail: msecu@infim.ro [National Institute for Materials Physics, PO Box MG-7, 77125 Bucharest-Magurele (Romania); Cherestes, C.; Paraschiva, V. [Dozimed Ltd., Dosimetry Laboratory, 77125 Bucharest-Magurele (Romania); Barca, C. [Faculty of Physics, University of Bucharest, 77125 Bucharest-Magurele (Romania)

2011-10-15

The thermoluminescence (TL) response to gamma-ray irradiation of tooth enamel is reported. The tooth enamel was separated from dentine by using mechanical and physico-chemical procedures followed by grinding (grain size {approx}100 {mu}m) and etching. The TL was attributed to the recombination of CO{sub 2}{sup -} radicals incorporated into or attached to the surface of hydroxyapatite crystals. The growth of the {approx}380 deg. C TL peak with absorbed dose was examined with irradiated tooth enamel samples and reconstructed doses evaluated for tooth enamel samples from four human subjects. - Highlights: > Thermoluminescence response after gamma-ray irradiation of tooth enamel was investigated. > Thermoluminescence was attributed to the recombination of CO{sub 2}{sup -} radicals. > CO{sub 2}{sup -} radicals are produced inside or at the surface of hydroxyapatite crystals. > From the growth of the 380C peak reconstructed doses have been evaluated.

[XPS analysis of beads formed by fuse breaking of electric copper wire].

Science.gov (United States)

Wu, Ying; Meng, Qing-Shan; Wang, Xin-Ming; Gao, Wei; Di, Man

2010-05-01

The in-depth composition of beads formed by fuse breaking of the electric copper wire in different circumstances was studied by XPS with Ar+ ion sputtering. In addition, the measured Auger spectra and the calculated Auger parameters were compared for differentiation of the substances of Cu and Cu2O. Corresponding to the sputtering depth, the molten product on a bead induced directly by fuse breaking of the copper wire without cover may be distinguished as three portions: surface layer with a drastic decrease in carbon content; intermediate layer with a gentle change in oxygen content and gradually diminished carbon peak, and consisting of Cu2O; transition layer without Cu2O and with a rapid decrease in oxygen content. While the molten product on a bead formed by fuse breaking of the copper wire after its insulating cover had been burned out may be distinguished as two portions: surface layer with carbon content decreasing quickly; subsurface layer without Cu2O and with carbon and oxygen content decreasing gradually. Thus, it can be seen that there was an obvious interface between the layered surface product and the substrate for the first type of bead, while as to the second type of bead there was no interface. As a result, the presence of Cu2O and the quantitative results can be used to identify the molten product on a bead induced directly by fuse breaking of the copper wire without cover and the molten product on a bead formed by fuse breaking of the cupper wire after its insulating cover had been burned out, as a complementary technique for the judgments of fire cause.

SimFuse: A Novel Fusion Simulator for RNA Sequencing (RNA-Seq Data

Directory of Open Access Journals (Sweden)

Yuxiang Tan

2015-01-01

Full Text Available The performance evaluation of fusion detection algorithms from high-throughput sequencing data crucially relies on the availability of data with known positive and negative cases of gene rearrangements. The use of simulated data circumvents some shortcomings of real data by generation of an unlimited number of true and false positive events, and the consequent robust estimation of accuracy measures, such as precision and recall. Although a few simulated fusion datasets from RNA Sequencing (RNA-Seq are available, they are of limited sample size. This makes it difficult to systematically evaluate the performance of RNA-Seq based fusion-detection algorithms. Here, we present SimFuse to address this problem. SimFuse utilizes real sequencing data as the fusions’ background to closely approximate the distribution of reads from a real sequencing library and uses a reference genome as the template from which to simulate fusions’ supporting reads. To assess the supporting read-specific performance, SimFuse generates multiple datasets with various numbers of fusion supporting reads. Compared to an extant simulated dataset, SimFuse gives users control over the supporting read features and the sample size of the simulated library, based on which the performance metrics needed for the validation and comparison of alternative fusion-detection algorithms can be rigorously estimated.

Enamel alteration following tooth bleaching and remineralization.

Science.gov (United States)

Coceska, Emilija; Gjorgievska, Elizabeta; Coleman, Nichola J; Gabric, Dragana; Slipper, Ian J; Stevanovic, Marija; Nicholson, John W

2016-06-01

The purpose of this study was to compare the effects of professional tooth whitening agents containing highly concentrated hydrogen peroxide (with and without laser activation), on the enamel surface; and the potential of four different toothpastes to remineralize any alterations. The study was performed on 50 human molars, divided in two groups: treated with Opalescence(®) Boost and Mirawhite(®) Laser Bleaching. Furthermore, each group was divided into five subgroups, a control one and 4 subgroups remineralized with: Mirasensitive(®) hap+, Mirawhite(®) Gelleѐ, GC Tooth Mousse™ and Mirafluor(®) C. The samples were analysed by SEM/3D-SEM-micrographs, SEM/EDX-qualitative analysis and SEM/EDX-semiquantitative analysis. The microphotographs show that both types of bleaching cause alterations: emphasized perikymata, erosions, loss of interprizmatic substance; the laser treatment is more aggressive and loss of integrity of the enamel is determined by shearing off the enamel rods. In all samples undergoing remineralization deposits were observed, those of toothpastes based on calcium phosphate technologies seem to merge with each other and cover almost the entire surface of the enamel. Loss of integrity and minerals were detected only in the line-scans of the sample remineralized with GC Tooth Mousse™. The semiquantitative EDX analysis of individual elements in the surface layer of the enamel indicates that during tooth-bleaching with HP statistically significant loss of Na and Mg occurs, whereas the bleaching in combination with a laser leads to statistically significant loss of Ca and P. The results undoubtedly confirm that teeth whitening procedures lead to enamel alterations. In this context, it must be noted that laser bleaching is more aggressive for dental substances. However, these changes are reversible and can be repaired by application of remineralization toothpastes. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

Abutment tooth loss in patients with overdentures.

Science.gov (United States)

Ettinger, Ronald L; Qian, Fang

2004-06-01

Since the 1960s, the use of natural teeth as overdenture abutments has become part of accepted clinical practice. Several longitudinal studies have been conducted, but tooth loss has not been reported to be a significant problem. The aim of this study was to identify the incidence and causes of tooth loss in a prospective cohort study of subjects wearing overdentures. The study, conducted between 1973 and 1994, evaluated 273 subjects (62.3 percent male) with a mean age of 59.6 years. Of the 273 subjects with 666 abutments, 74 lost 133 abutments. The most common cause of tooth loss was periodontal disease (29.3 percent) followed by periapical lesions (18.8 percent) and caries (16.5 percent). Through logistic regression, the authors found that subjects who lost teeth were more likely to have medical problems that could cause soft-tissue lesions of the oral mucosa, were less likely to use fluoride daily and were less likely to return for yearly recall visits. The authors found 22 vertical fractures in 17 subjects. Chi2 analysis revealed that overdenture teeth in the maxillary arch that were opposed by natural teeth were more likely to experience vertical fractures. In a study that followed up some patients for as long as 22 years, the rate of tooth loss was 20.0 percent. Many of these failures could have been prevented if patients had practiced better oral hygiene. The findings suggest that if a dentist recommends overdenture therapy, the patient needs to be examined regularly to reduce the risk of experiencing caries and periodontal disease. Also, if the abutments are in the maxilla and are opposed by natural teeth, the dentist should consider using thimble crowns to reduce the risk of vertical fractures.

Electromigration driven failures on miniature silver fuses at the Large Hadron Collider

CERN Document Server

Trikoupis, Nikolaos; Perez Fontenla, Ana Teresa

2017-01-01

Spurious faults were observed on the miniature silver fuses of electronic cards used for the cryogenics instrumentation in the LHC (Large Hadron Collider) accelerator at CERN. By applying analytical tools and techniques such as Scanning Electron Microscopy, spectrometry and Weibull reliability calculations and by the knowledge of operating temperatures and operational time of each unit, the origin of the problem has now been understood and can be attributed to electromigration. The selected fuse was operated at moderate temperature and load conditions and was considered as a “lifetime” component. However, it turned out to have a smaller than expected MTTF with failures following a Weibull distribution of $\\beta = 3.91$ and $\\eta = 2323$. The literature describes extensively the effects of electromigration, but there are only limited references referring to the impact of this phenomenon on miniature silver fuses for electronic circuits.

Fusion algebra and fusing matrices