WorldWideScience

Sample records for superior tracking performance

  1. Performance of ATLAS tracking

    CERN Document Server

    Roe, Shaun; The ATLAS collaboration

    2017-01-01

    Run-2 of the Large Hadron Collider (LHC) has provided new challenges to track and vertex reconstruction with higher centre-of-mass energies and luminosity leading to increasingly high-multiplicity envi-ronments. This talk provides an overview of the tracking performance, highlighting tracking improvements due to the Insertable B-Layer (IBL) and the introduction of time-dependent alignment.

  2. Tracking Performance at LHCb

    CERN Multimedia

    Wandernoth, S

    2010-01-01

    We present the tracking performance at LHCb by showing the mass resolution, impact parameter resolution and proper time resolution of the first data taken at LHCb. Furthermore several methods to estimate the tagging efficiency on data are presented.

  3. Track Reconstruction Performance in CMS

    CERN Document Server

    Azzurri, Paolo

    2008-01-01

    The expected performance of track reconstruction with LHC events using the CMS silicon tracker is presented. Track finding and fitting is accomplished with Kalman Filter techniques that achieve efficiencies above 99\\% on single muons with $p_T >$1~GeV/c. Difficulties arise in the context of standard LHC events with a high density of charged particles, where the rate of fake combinatorial tracks is very large for low $p_T$ tracks, and nuclear interactions in the tracker material reduce the tracking efficiency for charged hadrons. Recent improvements with the CMS track reconstruction now allow to efficiently reconstruct charged tracks with $p_T$ down to few hundred MeV/c and as few as three crossed layers, with a very small fake fraction, by making use of an optimal rejection of fake tracks in conjunction with an iterative tracking procedure.

  4. The Business Value of Superior Energy Performance

    Energy Technology Data Exchange (ETDEWEB)

    McKane, Aimee; Scheihing, Paul; Evans, Tracy; Glatt, Sandy; Meffert, William

    2015-08-04

    Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing the collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.

  5. LHCb: The LHCb tracking concept and performance

    CERN Multimedia

    Rodrigues, E

    2009-01-01

    The LHCb tracking system is designed to reconstruct charged particle trajectories in the forward spectrometer, in view of high precision studies of CP-violating phenomena and searches for rare b-hadron decays at the LHC. The system is composed of four major subdetectors and a dedicated magnet, providing an excellent momentum resolution just above 0.4%. The tracking model is based on the innovative trajectories concept introduced by the BaBar collaboration to reconstruct and fit the tracks, and has been further developed and improved. It is now able to cope with realistic geometries and misalignments in a sophisticated, robust and detector-independent way. The LHCb tracking concept including the interplay of various complementary pattern recognition algorithms and the bi-directional Kalman fitter will be described. The current performance of the tracking, based on the latest simulations, will be presented. Recent results obtained with the first LHC beam tracks from injection tests will be discussed.

  6. Fringe tracking performance monitoring: FINITO at VLTI

    CERN Document Server

    Merand, A; Berger, J -P; Percheron, I; Poupar, S

    2012-01-01

    Since April 2011, realtime fringe tracking data are recorded simultaneously with data from the VLTI/AMBER interferometric beam combiner. Not only this offers possibilities to post-process AMBER reduced data to obtain more accurate interferometric quantities, it also allows to estimate the performance of the fringe tracking a function of the conditions of seeing, coherence time, flux, etc. First we propose to define fringe tracking performance metrics in the AMBER context, in particular as a function of AMBER's integration time. The main idea is to determine the optimal exposure time for AMBER: short exposures are dominated by readout noise and fringes in long exposures are completely smeared out. Then we present this performance metrics correlated with Paranal local ASM (Ambient Site Monitor) measurements, such as seeing, coherence time or wind speed for example. Finally, we also present some preliminary results of attempts to model and predict fringe tracking performances, using Artificial Neural Networks.

  7. Visual Object Tracking Performance Measures Revisited.

    Science.gov (United States)

    Čehovin, Luka; Leonardis, Aleš; Kristan, Matej

    2016-03-01

    The problem of visual tracking evaluation is sporting a large variety of performance measures, and largely suffers from lack of consensus about which measures should be used in experiments. This makes the cross-paper tracker comparison difficult. Furthermore, as some measures may be less effective than others, the tracking results may be skewed or biased toward particular tracking aspects. In this paper, we revisit the popular performance measures and tracker performance visualizations and analyze them theoretically and experimentally. We show that several measures are equivalent from the point of information they provide for tracker comparison and, crucially, that some are more brittle than the others. Based on our analysis, we narrow down the set of potential measures to only two complementary ones, describing accuracy and robustness, thus pushing toward homogenization of the tracker evaluation methodology. These two measures can be intuitively interpreted and visualized and have been employed by the recent visual object tracking challenges as the foundation for the evaluation methodology.

  8. Performance of the LHCb Tracking Detectors

    CERN Document Server

    Tobin, Mark

    2013-01-01

    The LHCb experiment is making high-precision measurements of CP violation and searching for New Physics using the enormous flux of beauty and charm hadrons produced at the LHC. The detector includes a high precision tracking system consisting of a silicon-strip vertex detector surrounding the pp interaction region, a large-area silicon-strip detector located upstream of a dipole magnet, and three stations of silicon-strip detectors and straw drift tubes placed downstream. The performance of the individual silicon-strip detectors will be discussed together with the overall performance of the full tracking system.

  9. Biological Motion Task Performance Predicts Superior Temporal Sulcus Activity

    Science.gov (United States)

    Herrington, John D.; Nymberg, Charlotte; Schultz, Robert T.

    2011-01-01

    Numerous studies implicate superior temporal sulcus (STS) in the perception of human movement. More recent theories hold that STS is also involved in the "understanding" of human movement. However, almost no studies to date have associated STS function with observable variability in action understanding. The present study directly associated STS…

  10. Track and vertex finding performance with the CMS inner tracker

    CERN Document Server

    Caner, A; Khanov, A I; Stepanov, N

    1999-01-01

    The Compact Muon Solenoid (CMS) Tracker Collaboration has recently finalised the design of the tracking detector. After characterising the detector layout, we review in detail the algorithms developed for track and vertex reconstruction. We discuss the reconstruction capability for several benchmark event topologies and assess the projected performance of the CMS tracking detector. (12 refs).

  11. MMT nightly tracking logs: a web-enabled database for continuous evaluation of tracking performance

    Science.gov (United States)

    Clark, D.; Gibson, J. D.; Porter, D.; Trebisky, T.

    2012-09-01

    Over the past few years, the MMT Observatory has developed a number of web browser front ends for operation interfaces and staff access to internal databases. Among these is a facility for viewed reduced tracking logs in both time series and FFTs for convenient examination of tracking performance. Part of the back-end software also keeps the tracking data in a searchable database, allowing data over long periods of time to be collected and analyzed to look for trends, the influence of environmental factors on tracking, and help detect tracking degradation in a timely manner.

  12. Best tracking performance for integrator and dead time plant

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The optimal tracking performance for integrator and dead time plant in the case where plant uncertainty and control energy constraints axe to be considered jointly is inrestigated.Firstly,an average cost function of the tracking error and the plant input energy over a class of stochastic model errors are defined.Then,we obtain an internal model controller design method that minimizes the average performance and further studies optimal tracking performance for integrator and dead time plant in the simultaneous presence of plant uncertainty and control energy constraint.The results can be used to evaluate optimal tracking performance and control energy in practical designs.

  13. Best Tracking Performance under Plant Uncertainty and Control Energy Constraint

    Institute of Scientific and Technical Information of China (English)

    KONG Yi-gang; WANG Zhi-xin; WANG Jian-guo

    2007-01-01

    This paper has investigated best tracking performance for linear feedback control systems in the case that plant uncertainty and control effort need to be considered simultaneously. Firstly, an average integral square criterion of the tracking error and the plant input energy over a class of additive model errors is defined. Then, utilizing spectral factorization to minimize the performance index, we obtain an optimal controller design method, and furthermore study optimal tracking performance under plant uncertainty and control energy constraint. The results can be used to evaluate optimal average tracking performance and control energy in designing practical control systems.

  14. Mechanisms of Vertical Fusional Vergence in Patients With "Congenital Superior Oblique Paresis" Investigated With an Eye-Tracking Haploscope.

    Science.gov (United States)

    Irsch, Kristina; Guyton, David L; Park, Hee-Jung S; Ying, Howard S

    2015-08-01

    To determine the mechanisms of vertical fusional vergence in patients with "congenital unilateral superior oblique paresis" (SOP) and to discuss the implications of these mechanisms. Eleven patients were examined with our eye-tracking haploscope. Three different fusion mechanisms were found, producing significantly different cyclovergence to vertical vergence ratios (P < 0.05): primary use of the vertical rectus muscles in seven patients (ratio: 0.36 ± 1.6), primary use of the oblique muscles in one patient (0.04), and use of the superior oblique muscle in the higher eye and the superior rectus muscle in the lower eye in three patients (1.15 ± 0.32). Lancaster red-green testing showed alignment differences among these groups, primarily differences in amount of subjective extorsion between the two eyes in straight-ahead gaze: The patient with oblique-muscle-mediated fusion showed essentially no subjective extorsion (0.5°), the patients with vertical-rectus-muscle-mediated vertical fusion showed a mean ± SD subjective extorsion of 3.6° ± 1.4°, and the patients with the mixed (oblique/rectus) fusion mechanism showed 7.0° ± 1.7° (P < 0.05). The choice of fusion mechanism may be a function of how much intorting effect is needed. Use of the oblique muscles bilaterally causes the least intorting effect, use of the vertical rectus muscles bilaterally adds more intorting effect, and activation of the "paretic" superior oblique muscle in the higher eye and the superior rectus muscle in the lower eye provides the greatest intorting effect. Subclassifying "congenital SOP" in this way (in which the "paretic" muscle may remain functional in many cases) may help guide its optimal surgical correction.

  15. A comparison of foveated acquisition and tracking performance relative to uniform resolution approaches

    Science.gov (United States)

    Dubuque, Shaun; Coffman, Thayne; McCarley, Paul; Bovik, A. C.; Thomas, C. William

    2009-05-01

    Foveated imaging has been explored for compression and tele-presence, but gaps exist in the study of foveated imaging applied to acquisition and tracking systems. Results are presented from two sets of experiments comparing simple foveated and uniform resolution targeting (acquisition and tracking) algorithms. The first experiments measure acquisition performance when locating Gabor wavelet targets in noise, with fovea placement driven by a mutual information measure. The foveated approach is shown to have lower detection delay than a notional uniform resolution approach when using video that consumes equivalent bandwidth. The second experiments compare the accuracy of target position estimates from foveated and uniform resolution tracking algorithms. A technique is developed to select foveation parameters that minimize error in Kalman filter state estimates. Foveated tracking is shown to consistently outperform uniform resolution tracking on an abstract multiple target task when using video that consumes equivalent bandwidth. Performance is also compared to uniform resolution processing without bandwidth limitations. In both experiments, superior performance is achieved at a given bandwidth by foveated processing because limited resources are allocated intelligently to maximize operational performance. These findings indicate the potential for operational performance improvements over uniform resolution systems in both acquisition and tracking tasks.

  16. Vibro-acoustic performance of newly designed tram track structures

    Science.gov (United States)

    Haladin, Ivo; Lakušić, Stjepan; Ahac, Maja

    2017-09-01

    Rail vehicles in interaction with a railway structure induce vibrations that are propagating to surrounding structures and cause noise disturbance in the surrounding areas. Since tram tracks in urban areas often share the running surface with road vehicles one of top priorities is to achieve low maintenance and long lasting structure. Research conducted in scope of this paper gives an overview of newly designed tram track structures designated for use on Zagreb tram network and their performance in terms of noise and vibration mitigation. Research has been conducted on a 150 m long test section consisted of three tram track types: standard tram track structure commonly used on tram lines in Zagreb, optimized tram structure for better noise and vibration mitigation and a slab track with double sleepers embedded in a concrete slab, which presents an entirely new approach of tram track construction in Zagreb. Track has been instrumented with acceleration sensors, strain gauges and revision shafts for inspection. Relative deformations give an insight into track structure dynamic load distribution through the exploitation period. Further the paper describes vibro-acoustic measurements conducted at the test site. To evaluate the track performance from the vibro-acoustical standpoint, detailed analysis of track decay rate has been analysed. Opposed to measurement technique using impact hammer for track decay rate measurements, newly developed measuring technique using vehicle pass by vibrations as a source of excitation has been proposed and analysed. Paper gives overview of the method, it’s benefits compared to standard method of track decay rate measurements and method evaluation based on noise measurements of the vehicle pass by.

  17. Modeling and performance analysis of GPS vector tracking algorithms

    Science.gov (United States)

    Lashley, Matthew

    This dissertation provides a detailed analysis of GPS vector tracking algorithms and the advantages they have over traditional receiver architectures. Standard GPS receivers use a decentralized architecture that separates the tasks of signal tracking and position/velocity estimation. Vector tracking algorithms combine the two tasks into a single algorithm. The signals from the various satellites are processed collectively through a Kalman filter. The advantages of vector tracking over traditional, scalar tracking methods are thoroughly investigated. A method for making a valid comparison between vector and scalar tracking loops is developed. This technique avoids the ambiguities encountered when attempting to make a valid comparison between tracking loops (which are characterized by noise bandwidths and loop order) and the Kalman filters (which are characterized by process and measurement noise covariance matrices) that are used by vector tracking algorithms. The improvement in performance offered by vector tracking is calculated in multiple different scenarios. Rule of thumb analysis techniques for scalar Frequency Lock Loops (FLL) are extended to the vector tracking case. The analysis tools provide a simple method for analyzing the performance of vector tracking loops. The analysis tools are verified using Monte Carlo simulations. Monte Carlo simulations are also used to study the effects of carrier to noise power density (C/N0) ratio estimation and the advantage offered by vector tracking over scalar tracking. The improvement from vector tracking ranges from 2.4 to 6.2 dB in various scenarios. The difference in the performance of the three vector tracking architectures is analyzed. The effects of using a federated architecture with and without information sharing between the receiver's channels are studied. A combination of covariance analysis and Monte Carlo simulation is used to analyze the performance of the three algorithms. The federated algorithm without

  18. Advanced Modeling of Teaming Data to Enable Superior Team Performance

    Science.gov (United States)

    2014-11-04

    permission should be directed to the Software Engineering Institute at permission@sei.cmu.edu. CMMI ® is registered in the U.S. Patent and Trademark...Hill AFB) has had a long-term initiative to improve performance based on CMMI  and TSP. Work Progress • Multi-year effort with SEI support and...internal resource commitments • Training in the basic SEI technologies plus extensive training in six-sigma methods . Plan: sustain and improve Goal

  19. Substitutional Doping for Aluminosilicate Mineral and Superior Water Splitting Performance

    Science.gov (United States)

    Zhang, Yi; Fu, Liangjie; Shu, Zhan; Yang, Huaming; Tang, Aidong; Jiang, Tao

    2017-07-01

    Substitutional doping is a strategy in which atomic impurities are optionally added to a host material to promote its properties, while the geometric and electronic structure evolution of natural nanoclay mineral upon substitutional metal doping is still ambiguous. This paper first designed an efficient lanthanum (La) doping strategy for nanotubular clay (halloysite nanotube, HNT) through the dynamic equilibrium of a substitutional atom in the presence of saturated AlCl3 solution, and systematic characterization of the samples was performed. Further density functional theory (DFT) calculations were carried out to reveal the geometric and electronic structure evolution upon metal doping, as well as to verify the atom-level effect of the La doping. The CdS loading and its corresponding water splitting performance could demonstrate the effect of La doping. CdS nanoparticles (11 wt.%) were uniformly deposited on the surface of La-doped halloysite nanotube (La-HNT) with the average size of 5 nm, and the notable photocatalytic hydrogen evolution rate of CdS/La-HNT reached up to 47.5 μmol/h. The results could provide a new strategy for metal ion doping and constructive insight into the substitutional doping mechanism.

  20. Tracking and Alignment Performance of the LHCb silicon detectors

    CERN Document Server

    Borghi, Silvia

    2011-01-01

    The LHCb experiment is primarily dedicated to the study of new physics through the heavy flavour decays. The tracking system of LHCb is composed of a silicon micro-strip vertex detector, two silicon strip tracker detectors and straw-tube drift chambers in front of and behind a dipole generating a magnetic field. This system provides precise measure of the vertex position and high momentum resolution. The performances of the silicon tracking subdetectors in terms of hit resolution and detector efficiencies, as well as on the overall track reconstruction performance and the alignment status, are reported.

  1. Performance of silicon pixel detectors at small track incidence angles

    CERN Document Server

    Viel, Simon; The ATLAS collaboration

    2015-01-01

    In order to enable the ATLAS experiment to successfully track charged particles produced in high-energy collisions at the High-Luminosity Large Hadron Collider, the current ATLAS Inner Detector will be replaced by the Inner Tracker (ITk), entirely composed of silicon pixel and strip detectors. An extension of the tracking coverage of ITk to very forward pseudorapidity values is proposed, using pixel modules placed in a long cylindrical layer around the beam pipe. The measurement of long pixel clusters, detected when charged particles cross the silicon sensor at small incidence angles, has potential to significantly improve the tracking efficiency, fake track rejection, and resolution of ITk in the very forward region. The performance of state-of-the-art pixel modules at small track incidence angles is studied using test beam data collected at SLAC and CERN, as well as simulated data.

  2. AMS tracking in-orbit performance

    CERN Document Server

    Pohl, Martin

    2015-01-01

    AMS-02 is a high precision magnetic spectrometer for cosmic rays in the GeV to TeV energy range. Its tracker consists of nine layers of double-sided silicon microstrip sensors. They are used to locate the trajectories of cosmic rays in the 0.14 T field of a cylindrical magnet, thus measuring their rigidity $p/Z$ and charge sign. In addition, they deliver a high resolution measurement of the absolute charge $|Z|$. The detector has been designed to operate in space with a position resolution of about 10 $\\mu$m for each hit and charge identification capabilities up to $Z=26$. In this talk I describe the performance in orbit of this detector component and its impact on the overall performance of the spectrometer.

  3. The design and performance of the ZEUS global tracking trigger

    Science.gov (United States)

    Allfrey, P. D.; Bell, M. A.; Coppola, N.; Devenish, R.; Dhawan, S.; Dunne, W.; Ferrando, J.; Gladkov, D.; Hall-Wilton, R.; Hayes, M.; Jakob, H.-P.; Loizidies, J. H.; Pellegrino, A.; Polini, A.; Roberfroid, V.; Soares, M.; Straub, P. B.; Stifutkin, A.; Sutton, M. R.; Topp-Jørgenssen, S.; West, B. J.; Woolley, N. P.; Youngman, C.

    2007-10-01

    The Global Tracking Trigger (GTT) of the ZEUS experiment is described. The GTT is data driven at the ZEUS first level trigger rate of ⩽600 Hz and performs event-based track finding on data from the experiment's Central Tracking Detector (CTD), silicon Micro Vertex Detector (MVD) and Straw Tube Tracker (STT) forward detectors. The resulting track-based trigger quantities calculated (track multiplicity, vertices, vector meson masses, background event probabilities, etc.) are available within ˜9 ms and are used in the experiment's second level trigger to improve the selection of physics events. Detector information is pushed to the PC farm of the GTT using PowerPC VME board computers which are either embedded within the detector's frontend readout system (MVD) or are parasitically attached to them via multiple serial transputer links (CTD and STT). Data flow and control is performed via point-to-point Fast and Giga ethernet switched network connections using the TCP protocol. The principal design challenges were: integrating new and interfacing to existing frontend systems, providing a useful trigger result, satisfying the rate and latency requirements and not interfering with ongoing data taking during commissioning. These aims have been achieved. The GTT has been actively used in the ZEUS trigger since 2004 when an initial CTD-only algorithm was used; in 2005 this was upgraded to use MVD information which significantly improves track and primary vertex resolutions. Commissioning problems delayed the STT implementation and its use in the GTT has only been tested.

  4. Performance measurement of the upgraded D0 central track trigger

    Energy Technology Data Exchange (ETDEWEB)

    Mommsen, Remigius, K.; /Manchester U. /Fermilab

    2006-12-01

    The D0 experiment was upgraded in spring 2006 to harvest the full physics potential of the Tevatron accelerator at Fermi National Accelerator Laboratory, Batavia, Illinois, USA. It is expected that the peak luminosity delivered by the accelerator will increase to over 300 x 10{sup 30} cm{sup -2} s{sup -1}. One of the upgraded systems is the Central Track Trigger (CTT). The CTT uses the Central Fiber Tracker (CFT) and Preshower detectors to identify central tracks with p{sub T} > 1.5GeV at the first trigger level. Track candidates are formed by comparing fiber hits to predefined track equations. In order to minimize latency, this operation is performed in parallel using combinatorial logic implemented in FPGAs. Limited hardware resources prevented the use of the full granularity of the CFT. This leads to a high fake track rate as the occupancy increases. In order to mitigate the problem, new track-finding hardware was designed and commissioned. We report on the upgrade and the improved performance of the CTT system.

  5. Switching Tracking Control for Planar Systems with Transient Performance Constraints

    Institute of Scientific and Technical Information of China (English)

    SU Qing-Yu; SUN Xi-Ming; ZHAO Jun

    2013-01-01

    This paper studies the output tracking problem for a class of planar systems with some given transient performance constraints which are determined by the overshoot and the settling time.The problem of switched static output feedback tracking with output constraints (SSOFTOC) is proposed and solved for the first time.The static output feedback controllers and a so-called conic switching law are designed under which the output of the closed-loop switched system can track the step signal asymptotically without violating the transient performance constraints.Furthermore,an optimal weighted transient performance is obtained by.solving a nonlinear programming problem.Finally,a numerical example and an application to aircraft turbofan engine are given to illustrate the effectiveness and the applicability of the proposed method.

  6. Intangible Assets and Superior and Sustained Performance of Innovative Brazilian Firms

    Directory of Open Access Journals (Sweden)

    Márcia Martins Mendes De Luca

    2014-10-01

    Full Text Available According to the Resource-Based View, the nature of the resources, competences and knowledge accumulated by firms are the major causes of variation in business performance. In view of the importance attributed to intangible assets, the purpose of the present study was to investigate whether innovative firms with superior and sustained performance and firms without superior and sustained performance differ with regard to investments in intangible assets. The sample consisted of 137 firms listed on the Brazilian stock exchange from 2007 to 2010 and belonging to innovative sectors according to the Brazilian Innovation Index. Only 51 firms with profitability above the sector average during the entire study period (four years met the criterion of superior and sustained performance. Thus, using return on assets as a proxy for performance, investments in intangibles were found to be greater in firms without superior and sustained performance, particularly with regard to the categories intellectual property assets (the predominant category and infrastructure assets. Based on the lack of evidence for a significant correlation between corporate performance and investment in intangible assets, our initial hypothesis that a positive relation exists between the composition of investments in intangible assets and the performance of innovative firms could not be confirmed.

  7. Mechatronic track guidance on disturbed track: the trade-off between actuator performance and wheel wear

    Science.gov (United States)

    Kurzeck, Bernhard; Heckmann, Andreas; Wesseler, Christoph; Rapp, Matthias

    2014-05-01

    Future high-speed trains are the main focus of the DLR research project Next Generation Train. One central point of the research activities is the development of mechatronic track guidance for the two-axle intermediate wagons with steerable, individually powered, independently rotating wheels. The traction motors hereby fulfil two functions; they concurrently are traction drives and steering actuators. In this paper, the influence of the track properties - line layout and track irregularities - on the performance requirements for the guidance actuator is investigated using multi-body models in SIMPACK®. In order to compromise on the design conflict between low wheel wear and low steering torque, the control parameters of the mechatronic track guidance are optimised using the DLR in-house software MOPS. Besides the track irregularities especially the increasing inclination at transition curves defines high actuator requirements due to gyroscopic effects at high speed. After introducing a limiter for the actuating variables into the control system, a good performance is achieved.

  8. Competitively Distinct Operations as a Key for Superior and Sustainable Business Performance: An Example from Walmart

    Directory of Open Access Journals (Sweden)

    Binod Timilsina

    2015-09-01

    Full Text Available Existing research on the resource-based view (RBV has provided limited evidence on how firms achieve superior and sustainable business performance; this failure is because current literature de-emphasizes the importance of operations. This paper argues that to gain and sustain superior business performance, a firm’s sustainable competitive advantage is not enough, its operations also needs to be competitively distinct. Therefore, through unifying the necessary conditions of superior and sustainable business performance the paper presents a better understanding of the RBV. The success story of Walmart, from existing literature, is considered as an example to support the proposed framework. The paper concludes that the cost of operations, opportunity cost, cost of resources and possible output are the crucial factors in resource choice and operations decision to secure competitively distinct operations. Finally, theoretical and managerial implications, research limitations and future research possibilities are discussed.

  9. Bidirectional MIMO Channel Tracking Based on PASTd and Performance Evaluation

    Science.gov (United States)

    Ehrenberg, Livnat; Gannot (Eurasipmember), Sharon; Shayevitz, Ofer; Leshem, Amir; Zehavi, Ephraim

    2010-12-01

    We consider a bidirectional time division duplex (TDD) multiple-input multiple-output (MIMO) communication system with time-varying channel and additive white Gaussian noise (AWGN). A blind bidirectional channel tracking algorithm, based on the projection approximation subspace tracking (PAST) algorithm, is applied in both terminals. The resulting singular value decomposition (SVD) of the channel matrix is then used to approximately diagonalize the channel. The proposed method is applied to an orthogonal frequency-division multiplexing-(OFDM-)MIMO setting with a typical indoor time-domain reflection model. The computational cost of the proposed algorithm, compared with other state-of-the-art algorithms, is relatively small. The Kalman filter is utilized for establishing a benchmark for the obtained performance of the proposed tracking algorithm. The performance degradation relative to a full channel state information (CSI) due to the application of the tracking algorithm is evaluated in terms of average effective rate and the outage probability and compared with alternative tracking algorithms. The obtained results are also compared with a benchmark obtained by the Kalman filter with known input signal and channel characteristics. It is shown that the expected degradation in performance of frequency-domain algorithms (which do not exploit the smooth frequency response of the channel) is only minor compared with time-domain algorithms in a range of reasonable signal-to-noise ratio (SNR) levels. The proposed bidirectional frequency-domain tracking algorithm, proposed in this paper, is shown to attain communication rates close to the benchmark and to outperform a competing algorithm. The paper is concluded by evaluating the proposed blind tracking method in terms of the outage probability and the symbol error rate (SER) versus. SNR for binary phase shift keying (BPSK) and 4-Quadrature amplitude modulation (QAM) constellations.

  10. Bidirectional MIMO Channel Tracking Based on PASTd and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Shayevitz Ofer

    2010-01-01

    Full Text Available Abstract We consider a bidirectional time division duplex (TDD multiple-input multiple-output (MIMO communication system with time-varying channel and additive white Gaussian noise (AWGN. A blind bidirectional channel tracking algorithm, based on the projection approximation subspace tracking (PAST algorithm, is applied in both terminals. The resulting singular value decomposition (SVD of the channel matrix is then used to approximately diagonalize the channel. The proposed method is applied to an orthogonal frequency-division multiplexing-(OFDM-MIMO setting with a typical indoor time-domain reflection model. The computational cost of the proposed algorithm, compared with other state-of-the-art algorithms, is relatively small. The Kalman filter is utilized for establishing a benchmark for the obtained performance of the proposed tracking algorithm. The performance degradation relative to a full channel state information (CSI due to the application of the tracking algorithm is evaluated in terms of average effective rate and the outage probability and compared with alternative tracking algorithms. The obtained results are also compared with a benchmark obtained by the Kalman filter with known input signal and channel characteristics. It is shown that the expected degradation in performance of frequency-domain algorithms (which do not exploit the smooth frequency response of the channel is only minor compared with time-domain algorithms in a range of reasonable signal-to-noise ratio (SNR levels. The proposed bidirectional frequency-domain tracking algorithm, proposed in this paper, is shown to attain communication rates close to the benchmark and to outperform a competing algorithm. The paper is concluded by evaluating the proposed blind tracking method in terms of the outage probability and the symbol error rate (SER versus. SNR for binary phase shift keying (BPSK and 4-Quadrature amplitude modulation (QAM constellations.

  11. Performance evaluation software moving object detection and tracking in videos

    CERN Document Server

    Karasulu, Bahadir

    2013-01-01

    Performance Evaluation Software: Moving Object Detection and Tracking in Videos introduces a software approach for the real-time evaluation and performance comparison of the methods specializing in moving object detection and/or tracking (D&T) in video processing. Digital video content analysis is an important item for multimedia content-based indexing (MCBI), content-based video retrieval (CBVR) and visual surveillance systems. There are some frequently-used generic algorithms for video object D&T in the literature, such as Background Subtraction (BS), Continuously Adaptive Mean-shift (CMS),

  12. Performance Assessment of Hybrid Data Fusion and Tracking Algorithms

    DEFF Research Database (Denmark)

    Sand, Stephan; Mensing, Christian; Laaraiedh, Mohamed

    2009-01-01

    This paper presents an overview on the performance of hybrid data fusion and tracking algorithms evaluated in the WHERE consortium. The focus is on three scenarios. For the small scale indoor scenario with ultra wideband (UWB) complementing cellular communication systems, the accuracy can vary in...

  13. Fatigue effects on tracking performance and muscle activity

    NARCIS (Netherlands)

    Huysmans, M.A.; Hoozemans, M.J.M.; Beek, A.J. van der; Looze, M.P. de; Dieën, J.H. van

    2008-01-01

    It has been suggested that fatigue affects proprioception and consequently movement accuracy, the effects of which may be counteracted by increased muscle activity. To determine the effects of fatigue on tracking performance and muscle activity in the M. extensor carpi radialis (ECR), 11 female

  14. Human Performance in Time-Shared Verbal and Tracking Tasks.

    Science.gov (United States)

    1979-04-01

    performance of both a one-dimensional compensatory tracking task and a continuous absoluzte difference digit- proceseing task. As mentioned above, the... parts : 1) What combination of input and output (I/O) channels for the discrete information processing task provides optimum information transmission

  15. Fatigue effects on tracking performance and muscle activity

    NARCIS (Netherlands)

    Huysmans, M.A.; Hoozemans, M.J.M.; Beek, A.J. van der; Looze, M.P. de; Dieën, J.H. van

    2008-01-01

    It has been suggested that fatigue affects proprioception and consequently movement accuracy, the effects of which may be counteracted by increased muscle activity. To determine the effects of fatigue on tracking performance and muscle activity in the M. extensor carpi radialis (ECR), 11 female part

  16. Subtitles and Eye Tracking: Reading and Performance

    Science.gov (United States)

    Kruger, Jan-Louis; Steyn, Faans

    2014-01-01

    This article presents an experimental study to investigate whether subtitle reading has a positive impact on academic performance. In the absence of reliable indexes of reading behavior in dynamic texts, the article first formulates and validates an index to measure the reading of text, such as subtitles on film. Eye-tracking measures (fixations…

  17. Improving jet substructure performance in ATLAS using Track-CaloClusters

    CERN Document Server

    The ATLAS collaboration

    2017-01-01

    Jet substructure techniques play a critical role in ATLAS in searches for new physics, are increasingly important in measurements of the Standard Model, and are being utilized in the trigger. To date, ATLAS has mostly focused on the use of calorimeter-based jet substructure, which works well for jets initiated by particles with low to moderate boost, but which lacks the angular resolution needed to resolve the desired substructure in the highly-boosted regime. We present a novel approach designed to mitigate the calorimeter angular resolution limitations, thus providing superior performance to prior methods. Similarly to the previously developed combined mass technique, the superior angular resolution of the tracker is combined with information from the calorimeters. However, the new method is fundamentally different, as it correlates low-level objects such as tracks and individual energy deposits in the calorimeter, before running any jet finding algorithms. The resulting objects are used as inputs to jet re...

  18. Correlation analysis between ionospheric scintillation levels and receiver tracking performance

    Science.gov (United States)

    Sreeja, V.; Aquino, M.; Elmas, Z. G.; Forte, B.

    2012-06-01

    Rapid fluctuations in the amplitude and phase of a transionospheric radio signal caused by small scale plasma density irregularities in the ionosphere are known as scintillation. Scintillation can seriously impair a GNSS (Global Navigation Satellite Systems) receiver tracking performance, thus affecting the required levels of availability, accuracy and integrity, and consequently the reliability of modern day GNSS based applications. This paper presents an analysis of correlation between scintillation levels and tracking performance of a GNSS receiver for GPS L1C/A, L2C and GLONASS L1, L2 signals. The analyses make use of data recorded over Presidente Prudente (22.1°S, 51.4°W, dip latitude ˜12.3°S) in Brazil, a location close to the Equatorial Ionisation Anomaly (EIA) crest in Latin America. The study presents for the first time this type of correlation analysis for GPS L2C and GLONASS L1, L2 signals. The scintillation levels are defined by the amplitude scintillation index, S4 and the receiver tracking performance is evaluated by the phase tracking jitter. Both S4 and the phase tracking jitter are estimated from the post correlation In-Phase (I) and Quadra-Phase (Q) components logged by the receiver at a high rate. Results reveal that the dependence of the phase tracking jitter on the scintillation levels can be represented by a quadratic fit for the signals. The results presented in this paper are of importance to GNSS users, especially in view of the forthcoming high phase of solar cycle 24 (predicted for 2013).

  19. Run 1 legacy performance: Tracking, flavour tagging, muons in ATLAS

    CERN Document Server

    Moyse, EJW; The ATLAS collaboration

    2014-01-01

    In this talk, the run 1 legacy performance of the tracking, heavy-flavor tagging and muon reconstruction in the ATLAS and CMS experiments will be described, as well as the associated systematic uncertainties. The two speakers should try to enlight the differences of performances between the two experiments, and explain what worked better/worse than planned, as well as the lessons for the run 2.

  20. Predicting Mobility Performance of a Small, Lightweight Track System Using the Computer-Aided Method NTVPM

    Science.gov (United States)

    2015-04-24

    track system on sandy soil. The cross-country (tractive) performance of the track system predicted by NTVPM is compared with experimental data obtained...of large, heavy tracked vehicles (Wong, 2008; Wong 2010), to predicting the performance of a small, lightweight single track system on sandy soil...and the sprocket at the rear. The track is made of rubber (a 92 shore A durometer toothed rubber belt produced by BrecoFlex). The track (belt) width

  1. Keeping on track: performance profiles of low performers in a stratified educational system

    NARCIS (Netherlands)

    Reed, Helen C.; van Wesel, F.; Ouwehand, Carolijn; Jolles, Jelle

    2015-01-01

    In countries with high differentiation between academic and vocational education, an individual’s future prospects are strongly determined by the educational track to which he or she is assigned. This large-scale, cross-sectional study focuses on low-performing students in academic tracks who face b

  2. Development of performance tracking for a pediatric hospitalist division.

    Science.gov (United States)

    Paciorkowski, Natalia; Pruitt, Cassandra; Lashly, Dana; Hrach, Chrissy; Harrison, Elizabeth; Srinivasan, Mythili; Turmelle, Michael; Carlson, Douglas

    2013-04-01

    Our goal was to develop a comprehensive performance tracking process for a large pediatric hospitalist division. We aimed to use established dimensions and theory of health care quality to identify measures relevant to common inpatient diagnoses, reflective of current standards of clinical care, and applicable to individual physician performance. We also sought to implement a reproducible data collection strategy that minimizes manual data collection and measurement bias. Washington University Division of Pediatric Hospital Medicine provides clinical care in 17 units within 3 different hospitals. Hospitalist services were grouped into 5 areas, and a task group was created of divisional leaders representing clinical services. The group was educated on the health care quality theory and tasked to search clinical practice standards and quality resources. The groups proposed a broad spectrum of performance questions that were screened for electronic data availability and modified into measurable formulas. Eighty-seven performance questions were identified and analyzed for their alignment with known clinical guidelines and value in measuring performance. Questions were distributed across quality domains, with most addressing safety. They reflected structure, outcome, and, most commonly, process. Forty-seven questions were disease specific, and 79 questions reflected individual physician performance; 52 questions had electronically available data. We describe a systematic approach to the development of performance indicators for a pediatric hospitalist division that can be used to measure performance on a division and physician level. We outline steps to develop a broad-spectrum quality tracking process to standardize clinical care and build invaluable resources for quality improvement research.

  3. Investigation on Superior Performance by Fractional Controller for Cart-Servo Laboratory Set-Up

    Directory of Open Access Journals (Sweden)

    Ameya Anil Kesarkar

    2014-01-01

    Full Text Available In this paper, an investigation is made on the superiority of fractional PID controller (PI^alpha D^beta over conventional PID for the cart-servo laboratory set-up. The designed controllers are optimum in the sense of Integral Absolute Error (IAE and Integral Square Error (ISE. The paper contributes in three aspects: 1 Acquiring nonlinear mathematical model for the cart-servo laboratory set-up, 2 Designing fractional and integer order PID for minimizing IAE, ISE, 3 Analyzing the performance of designed controllers for simulated plant model as well as real plant. The results show a significantly superior performance by PI^alpha D^beta as compared to the conventional PID controller.

  4. Superior performance of cone beam tomography in detecting a calcaneus fracture.

    Science.gov (United States)

    Lohse, Christian; Catala-Lehnen, Philip; Regier, Marc; Heiland, Max

    2015-01-01

    Cone beam computed tomography is a state-of-the-art imaging tool, initially developed for dental and maxillofacial application. With its high resolution and low radiation dose, cone beam tomography has been expanding its application fields, for example, to diagnosis of traumata and fractures in the head and neck area. In this study, we demonstrate superior and satisfactory performance of cone beam tomography for the imaging of a calcaneus fracture in comparison to conventional X-ray and computed tomography.

  5. Unique properties of halide perovskites as possible origins of the superior solar cell performance.

    Science.gov (United States)

    Yin, Wan-Jian; Shi, Tingting; Yan, Yanfa

    2014-07-16

    Halide perovskites solar cells have the potential to exhibit higher energy conversion efficiencies with ultrathin films than conventional thin-film solar cells based on CdTe, CuInSe2 , and Cu2 ZnSnSe4 . The superior solar-cell performance of halide perovskites may originate from its high optical absorption, comparable electron and hole effective mass, and electrically clean defect properties, including point defects and grain boundaries.

  6. Tracking Performances of Several Front-Absorber Designs

    CERN Document Server

    Lautridou, P; CERN. Geneva; Métivier, V; Rahmani, A; Ramillien, V; Reposeur, T; Morsch, Andreas; Cussonneau, J P

    1998-01-01

    The tracking performances of the ALICE forward muon spectrometer are investigated for several front-absorbers designs. The obtained mass resolution is compared to the one of the absorber proposed in the LOI. Out of punchthrough considerations, two absorbers compositions, including a Carbon+Concrete sandwich design, allow to reach the requested mass resolution for the Y's. Almost identical behaviours are observed versus rapidity and transverse momentum of resonances for both new candidates. These proposed designs improve the mass resolution performances and could stand as suitable absorber options for the forward muon spectrometer of ALICE. The Carbon+Concrete absorber has been retained for the Technical Proposal [1].

  7. Assessing the Costs and Benefits of the Superior Energy Performance Program

    Energy Technology Data Exchange (ETDEWEB)

    Therkelsen, Peter; McKane, Aimee; Sabouini, Ridah; Evans, Tracy

    2013-07-01

    Industrial companies are seeking to manage energy consumption and costs, mitigate risks associated with energy, and introduce transparency into reports of their energy performance achievements. Forty industrial facilities are participating in the U.S. DOE supported Superior Energy Performance (SEP) program in which facilities implement an energy management system based on the ISO 50001 standard, and pursue third-party verification of their energy performance improvements. SEP certification provides industrial facilities recognition for implementing a consistent, rigorous, internationally recognized business process for continually improving energy performance and achievement of established energy performance improvement targets. This paper focuses on the business value of SEP and ISO 50001, providing an assessment of the costs and benefits associated with SEP implementation at nine SEP-certified facilities across a variety of industrial sectors. These cost-benefit analyses are part of the U.S. DOE?s contribution to the Global Superior Energy Performance (GSEP) partnership, a multi-country effort to demonstrate, using facility data, that energy management system implementation enables companies to improve their energy performance with a greater return on investment than business-as-usual (BAU) activity. To examine the business value of SEP certification, interviews were conducted with SEP-certified facilities. The costs of implementing the SEP program, including internal facility staff time, are described and a marginal payback of SEP certification has been determined. Additionally, more qualitative factors with regard to the business value and challenges related to SEP and ISO 50001 implementation are summarized.

  8. CMS tracking performance results from early LHC operation

    Energy Technology Data Exchange (ETDEWEB)

    Khachatryan, Vardan [Yerevan Physics Inst. (Armenia); et al.

    2010-11-24

    The first LHC pp collisions at centre-of-mass energies of 0.9 and 2.36 TeV were recorded by the CMS detector in December 2009. The trajectories of charged particles produced in the collisions were reconstructed using the all-silicon Tracker and their momenta were measured in the 3.8 T axial magnetic field. Results from the Tracker commissioning are presented including studies of timing, efficiency, signal-to-noise, resolution, and ionization energy. Reconstructed tracks are used to benchmark the performance in terms of track and vertex resolutions, reconstruction of decays, estimation of ionization energy loss, as well as identification of photon conversions, nuclear interactions, and heavy-flavour decays.

  9. CMS Tracking Performance Results from Early LHC Operation

    CERN Document Server

    Khachatryan, Vardan; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hammer, Josef; Haensel, Stephan; Hoch, Michael; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kasieczka, Gregor; Kiesenhofer, Wolfgang; Krammer, Manfred; Liko, Dietrich; Mikulec, Ivan; Pernicka, Manfred; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Teischinger, Florian; Waltenberger, Wolfgang; Walzel, Gerhard; Widl, Edmund; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Benucci, Leonardo; Ceard, Ludivine; De Wolf, Eddi A.; Janssen, Xavier; Maes, Thomas; Mucibello, Luca; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Selvaggi, Michele; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Adler, Volker; Beauceron, Stephanie; Blyweert, Stijn; D'Hondt, Jorgen; Devroede, Olivier; Kalogeropoulos, Alexis; Maes, Joris; Maes, Michael; Tavernier, Stefaan; Van Doninck, Walter; Van Mulders, Petra; Villella, Ilaria; Chabert, Eric Christian; Charaf, Otman; Clerbaux, Barbara; De Lentdecker, Gilles; Dero, Vincent; Gay, Arnaud; Hammad, Gregory Habib; Marage, Pierre Edouard; Vander Velde, Catherine; Vanlaer, Pascal; Wickens, John; Costantini, Silvia; Grunewald, Martin; Klein, Benjamin; Marinov, Andrey; Ryckbosch, Dirk; Thyssen, Filip; Tytgat, Michael; Vanelderen, Lukas; Verwilligen, Piet; Walsh, Sinead; Zaganidis, Nicolas; Basegmez, Suzan; Bruno, Giacomo; Caudron, Julien; De Favereau De Jeneret, Jerome; Delaere, Christophe; Demin, Pavel; Favart, Denis; Giammanco, Andrea; Grégoire, Ghislain; Hollar, Jonathan; Lemaitre, Vincent; Militaru, Otilia; Ovyn, Severine; Pagano, Davide; Pin, Arnaud; Piotrzkowski, Krzysztof; Quertenmont, Loic; Schul, Nicolas; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Alves, Gilvan; Pol, Maria Elena; Henrique Gomes E Souza, Moacyr; Carvalho, Wagner; Da Costa, Eliza Melo; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Mundim, Luiz; Nogima, Helio; Oguri, Vitor; Santoro, Alberto; Silva Do Amaral, Sheila Mara; Sznajder, Andre; Torres Da Silva De Araujo, Felipe; De Almeida Dias, Flavia; Ferreira Dias, Marco Andre; Tomei, Thiago; De Moraes Gregores, Eduardo; Da Cunha Marinho, Franciole; Novaes, Sergio F.; Padula, Sandra; Darmenov, Nikolay; Dimitrov, Lubomir; Genchev, Vladimir; Iaydjiev, Plamen; Piperov, Stefan; Stoykova, Stefka; Sultanov, Georgi; Trayanov, Rumen; Vankov, Ivan; Dyulendarova, Milena; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Marinova, Evelina; Mateev, Matey; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Jiang, Chun-Hua; Liang, Dong; Liang, Song; Wang, Jian; Wang, Jian; Wang, Xianyou; Wang, Zheng; Yang, Min; Zang, Jingjing; Zhang, Zhen; Ban, Yong; Guo, Shuang; Hu, Zhen; Mao, Yajun; Qian, Si-Jin; Teng, Haiyun; Zhu, Bo; Cabrera, Andrés; Carrillo Montoya, Camilo Andres; Gomez Moreno, Bernardo; Ocampo Rios, Alberto Andres; Osorio Oliveros, Andres Felipe; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Lelas, Karlo; Plestina, Roko; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Dzelalija, Mile; Brigljevic, Vuko; Duric, Senka; Kadija, Kreso; Morovic, Srecko; Attikis, Alexandros; Fereos, Reginos; Galanti, Mario; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A.; Rykaczewski, Hans; Mahmoud, Mohammed; Hektor, Andi; Kadastik, Mario; Kannike, Kristjan; Müntel, Mait; Raidal, Martti; Rebane, Liis; Azzolini, Virginia; Eerola, Paula; Czellar, Sandor; Härkönen, Jaakko; Heikkinen, Mika Aatos; Karimäki, Veikko; Kinnunen, Ritva; Klem, Jukka; Kortelainen, Matti J.; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Sarkar, Subir; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Ungaro, Donatella; Wendland, Lauri; Banzuzi, Kukka; Korpela, Arja; Tuuva, Tuure; Sillou, Daniel; Besancon, Marc; Dejardin, Marc; Denegri, Daniel; Descamps, Julien; Fabbro, Bernard; Faure, Jean-Louis; Ferri, Federico; Ganjour, Serguei; Gentit, François-Xavier; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Marionneau, Matthieu; Millischer, Laurent; Rander, John; Rosowsky, André; Rousseau, Delphine; Titov, Maksym; Verrecchia, Patrice; Baffioni, Stephanie; Bianchini, Lorenzo; Bluj, Michal; Broutin, Clementine; Busson, Philippe; Charlot, Claude; Dobrzynski, Ludwik; Elgammal, Sherif; Granier de Cassagnac, Raphael; Haguenauer, Maurice; Kalinowski, Artur; Miné, Philippe; Paganini, Pascal; Sabes, David; Sirois, Yves; Thiebaux, Christophe; Zabi, Alexandre; Agram, Jean-Laurent; Besson, Auguste; Bloch, Daniel; Bodin, David; Brom, Jean-Marie; Cardaci, Marco; Conte, Eric; Drouhin, Frédéric; Ferro, Cristina; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Greder, Sebastien; Juillot, Pierre; Karim, Mehdi; Le Bihan, Anne-Catherine; Mikami, Yoshinari; Speck, Joaquim; Van Hove, Pierre; Fassi, Farida; Mercier, Damien; Baty, Clement; Beaupere, Nicolas; Bedjidian, Marc; Bondu, Olivier; Boudoul, Gaelle; Boumediene, Djamel; Brun, Hugues; Chanon, Nicolas; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fay, Jean; Gascon, Susan; Ille, Bernard; Kurca, Tibor; Le Grand, Thomas; Lethuillier, Morgan; Mirabito, Laurent; Perries, Stephane; Sordini, Viola; Tosi, Silvano; Tschudi, Yohann; Verdier, Patrice; Xiao, Hong; Roinishvili, Vladimir; Anagnostou, Georgios; Edelhoff, Matthias; Feld, Lutz; Heracleous, Natalie; Hindrichs, Otto; Jussen, Ruediger; Klein, Katja; Merz, Jennifer; Mohr, Niklas; Ostapchuk, Andrey; Perieanu, Adrian; Raupach, Frank; Sammet, Jan; Schael, Stefan; Sprenger, Daniel; Weber, Hendrik; Weber, Martin; Wittmer, Bruno; Actis, Oxana; Ata, Metin; Bender, Walter; Biallass, Philipp; Erdmann, Martin; Frangenheim, Jens; Hebbeker, Thomas; Hinzmann, Andreas; Hoepfner, Kerstin; Hof, Carsten; Kirsch, Matthias; Klimkovich, Tatsiana; Kreuzer, Peter; Lanske, Dankfried; Magass, Carsten; Merschmeyer, Markus; Meyer, Arnd; Papacz, Paul; Pieta, Holger; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Sowa, Michael; Steggemann, Jan; Teyssier, Daniel; Zeidler, Clemens; Bontenackels, Michael; Davids, Martina; Duda, Markus; Flügge, Günter; Geenen, Heiko; Giffels, Manuel; Haj Ahmad, Wael; Heydhausen, Dirk; Kress, Thomas; Kuessel, Yvonne; Linn, Alexander; Nowack, Andreas; Perchalla, Lars; Pooth, Oliver; Sauerland, Philip; Stahl, Achim; Thomas, Maarten; Tornier, Daiske; Zoeller, Marc Henning; Aldaya Martin, Maria; Behrenhoff, Wolf; Behrens, Ulf; Bergholz, Matthias; Borras, Kerstin; Campbell, Alan; Castro, Elena; Dammann, Dirk; Eckerlin, Guenter; Flossdorf, Alexander; Flucke, Gero; Geiser, Achim; Hauk, Johannes; Jung, Hannes; Kasemann, Matthias; Katkov, Igor; Kleinwort, Claus; Kluge, Hannelies; Knutsson, Albert; Kuznetsova, Ekaterina; Lange, Wolfgang; Lohmann, Wolfgang; Mankel, Rainer; Marienfeld, Markus; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mnich, Joachim; Mussgiller, Andreas; Olzem, Jan; Parenti, Andrea; Raspereza, Alexei; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Sen, Niladri; Stein, Matthias; Tomaszewska, Justyna; Volyanskyy, Dmytro; Wissing, Christoph; Autermann, Christian; Bobrovskyi, Sergei; Draeger, Jula; Eckstein, Doris; Enderle, Holger; Gebbert, Ulla; Kaschube, Kolja; Kaussen, Gordon; Klanner, Robert; Mura, Benedikt; Naumann-Emme, Sebastian; Nowak, Friederike; Pietsch, Niklas; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schröder, Matthias; Schum, Torben; Schwandt, Joern; Srivastava, Ajay Kumar; Stadie, Hartmut; Steinbrück, Georg; Thomsen, Jan; Wolf, Roger; Bauer, Julia; Buege, Volker; Cakir, Altan; Chwalek, Thorsten; Daeuwel, Daniel; De Boer, Wim; Dierlamm, Alexander; Dirkes, Guido; Feindt, Michael; Gruschke, Jasmin; Hackstein, Christoph; Hartmann, Frank; Heinrich, Michael; Held, Hauke; Hoffmann, Karl-Heinz; Honc, Simon; Kuhr, Thomas; Martschei, Daniel; Mueller, Steffen; Müller, Thomas; Niegel, Martin; Oberst, Oliver; Oehler, Andreas; Ott, Jochen; Peiffer, Thomas; Piparo, Danilo; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Renz, Manuel; Sabellek, Andreas; Saout, Christophe; Scheurer, Armin; Schieferdecker, Philipp; Schilling, Frank-Peter; Schott, Gregory; Simonis, Hans-Jürgen; Stober, Fred-Markus Helmut; Troendle, Daniel; Wagner-Kuhr, Jeannine; Zeise, Manuel; Zhukov, Valery; Ziebarth, Eva Barbara; Daskalakis, Georgios; Geralis, Theodoros; Kyriakis, Aristotelis; Loukas, Demetrios; Manolakos, Ioannis; Markou, Athanasios; Markou, Christos; Mavrommatis, Charalampos; Petrakou, Eleni; Gouskos, Loukas; Katsas, Panagiotis; Panagiotou, Apostolos; Evangelou, Ioannis; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Patras, Vaios; Triantis, Frixos A.; Aranyi, Attila; Bencze, Gyorgy; Boldizsar, Laszlo; Debreczeni, Gergely; Hajdu, Csaba; Horvath, Dezso; Kapusi, Anita; Krajczar, Krisztian; Laszlo, Andras; Sikler, Ferenc; Vesztergombi, Gyorgy; Beni, Noemi; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Veszpremi, Viktor; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Bansal, Sunil; Beri, Suman Bala; Bhatnagar, Vipin; Jindal, Monika; Kaur, Manjit; Kohli, Jatinder Mohan; Mehta, Manuk Zubin; Nishu, Nishu; Saini, Lovedeep Kaur; Sharma, Archana; Sharma, Richa; Singh, Anil; Singh, Jas Bir; Singh, Supreet Pal; Ahuja, Sudha; Chauhan, Sushil; Choudhary, Brajesh C.; Gupta, Pooja; Jain, Sandhya; Jain, Shilpi; Kumar, Ashok; Ranjan, Kirti; Shivpuri, Ram Krishen; Choudhury, Rajani Kant; Dutta, Dipanwita; Kailas, Swaminathan; Kataria, Sushil Kumar; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Suggisetti, Praveenkumar; Aziz, Tariq; Guchait, Monoranjan; Gurtu, Atul; Maity, Manas; Majumder, Devdatta; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Saha, Anirban; Sudhakar, Katta; Wickramage, Nadeesha; Banerjee, Sudeshna; Dugad, Shashikant; Mondal, Naba Kumar; Arfaei, Hessamaddin; Bakhshiansohi, Hamed; Fahim, Ali; Hashemi, Majid; Jafari, Abideh; Mohammadi Najafabadi, Mojtaba; Paktinat Mehdiabadi, Saeid; Safarzadeh, Batool; Zeinali, Maryam; Abbrescia, Marcello; Barbone, Lucia; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Dimitrov, Anton; Fedele, Francesca; Fiore, Luigi; Iaselli, Giuseppe; Lusito, Letizia; Maggi, Giorgio; Maggi, Marcello; Manna, Norman; Marangelli, Bartolomeo; My, Salvatore; Nuzzo, Salvatore; Pierro, Giuseppe Antonio; Pompili, Alexis; Pugliese, Gabriella; Romano, Francesco; Roselli, Giuseppe; Selvaggi, Giovanna; Silvestris, Lucia; Trentadue, Raffaello; Tupputi, Salvatore; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Giunta, Marina; Marcellini, Stefano; Masetti, Gianni; Montanari, Alessandro; Navarria, Francesco; Odorici, Fabrizio; Perrotta, Andrea; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gianni; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Broccolo, Giuseppe; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Frosali, Simone; Gallo, Elisabetta; Genta, Chiara; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Colafranceschi, Stefano; Fabbri, Franco; Piccolo, Davide; Fabbricatore, Pasquale; Musenich, Riccardo; Benaglia, Andrea; Cerati, Giuseppe Benedetto; De Guio, Federico; Di Matteo, Leonardo; Ghezzi, Alessio; Govoni, Pietro; Malberti, Martina; Malvezzi, Sandra; Martelli, Arabella; Massironi, Andrea; Menasce, Dario; Miccio, Vincenzo; Moroni, Luigi; Negri, Pietro; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Sala, Silvano; Salerno, Roberto; Tabarelli de Fatis, Tommaso; Tancini, Valentina; Taroni, Silvia; Buontempo, Salvatore; Cimmino, Anna; De Cosa, Annapaola; De Gruttola, Michele; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Noli, Pasquale; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bellan, Paolo; Bisello, Dario; Carlin, Roberto; Checchia, Paolo; Conti, Enrico; De Mattia, Marco; Dorigo, Tommaso; Dosselli, Umberto; Fanzago, Federica; Gasparini, Fabrizio; Gasparini, Ugo; Giubilato, Piero; Gresele, Ambra; Lacaprara, Stefano; Lazzizzera, Ignazio; Margoni, Martino; Mazzucato, Mirco; Meneguzzo, Anna Teresa; Perrozzi, Luca; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Vanini, Sara; Zotto, Pierluigi; Zumerle, Gianni; Baesso, Paolo; Berzano, Umberto; Riccardi, Cristina; Torre, Paola; Vitulo, Paolo; Viviani, Claudio; Biasini, Maurizio; Bilei, Gian Mario; Caponeri, Benedetta; Fanò, Livio; Lariccia, Paolo; Lucaroni, Andrea; Mantovani, Giancarlo; Menichelli, Mauro; Nappi, Aniello; Santocchia, Attilio; Servoli, Leonello; Valdata, Marisa; Volpe, Roberta; Azzurri, Paolo; Bagliesi, Giuseppe; Bernardini, Jacopo; Boccali, Tommaso; Castaldi, Rino; D'Agnolo, Raffaele Tito; Dell'Orso, Roberto; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Kraan, Aafke; Ligabue, Franco; Lomtadze, Teimuraz; Martini, Luca; Messineo, Alberto; Palla, Fabrizio; Palmonari, Francesco; Segneri, Gabriele; Serban, Alin Titus; Spagnolo, Paolo; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Barone, Luciano; Cavallari, Francesca; Del Re, Daniele; Di Marco, Emanuele; Diemoz, Marcella; Franci, Daniele; Grassi, Marco; Longo, Egidio; Organtini, Giovanni; Palma, Alessandro; Pandolfi, Francesco; Paramatti, Riccardo; Rahatlou, Shahram; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Biino, Cristina; Botta, Cristina; Cartiglia, Nicolo; Castello, Roberto; Costa, Marco; Demaria, Natale; Graziano, Alberto; Mariotti, Chiara; Marone, Matteo; Maselli, Silvia; Migliore, Ernesto; Mila, Giorgia; Monaco, Vincenzo; Musich, Marco; Obertino, Maria Margherita; Pastrone, Nadia; Pelliccioni, Mario; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Trocino, Daniele; Vilela Pereira, Antonio; Ambroglini, Filippo; Belforte, Stefano; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; Montanino, Damiana; Penzo, Aldo; Kim, Hyunsoo; Chang, Sunghyun; Chung, Jin Hyuk; Kim, Dong Hee; Kim, Gui Nyun; Kim, Ji Eun; Kong, Dae Jung; Park, Hyangkyu; Son, Dohhee; Son, Dong-Chul; Kim, Jaeho; Kim, Jae Yool; Song, Sanghyeon; Choi, Suyong; Hong, Byung-Sik; Kim, Hyunchul; Kim, Ji Hyun; Kim, Tae Jeong; Lee, Kyong Sei; Moon, Dong Ho; Park, Sung Keun; Rhee, Han-Bum; Sim, Kwang Souk; Choi, Minkyoo; Kang, Seokon; Kim, Hyunyong; Park, Chawon; Park, Inkyu; Park, Sangnam; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Lee, Jongseok; Lee, Sungeun; Seo, Hyunkwan; Yu, Intae; Janulis, Mindaugas; Martisiute, Dalia; Petrov, Pavel; Sabonis, Tomas; Carrillo Moreno, Salvador; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Reyes-Santos, Marco A.; Allfrey, Philip; Krofcheck, David; Tam, Jason; Butler, Philip H.; Signal, Tony; Williams, Jennifer C.; Ahmad, Muhammad; Ahmed, Ijaz; Asghar, Muhammad Irfan; Hoorani, Hafeez R.; Khan, Wajid Ali; Khurshid, Taimoor; Qazi, Shamona; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Konecki, Marcin; Krolikowski, Jan; Frueboes, Tomasz; Gokieli, Ryszard; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Szleper, Michal; Wrochna, Grzegorz; Zalewski, Piotr; Almeida, Nuno; David Tinoco Mendes, Andre; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Sá Martins, Pedro; Mini, Giuliano; Musella, Pasquale; Nayak, Aruna; Raposo, Luis; Ribeiro, Pedro Quinaz; Seixas, Joao; Silva, Pedro; Soares, David; Varela, Joao; Wöhri, Hermine Katharina; Belotelov, Ivan; Bunin, Pavel; Finger, Miroslav; Finger Jr., Michael; Golutvin, Igor; Kamenev, Alexey; Karjavin, Vladimir; Kozlov, Guennady; Lanev, Alexander; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Smirnov, Vitaly; Volodko, Anton; Zarubin, Anatoli; Bondar, Nikolai; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Andreev, Yuri; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Matveev, Viktor; Pashenkov, Anatoli; Toropin, Alexander; Troitsky, Sergey; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Kaftanov, Vitali; Kossov, Mikhail; Krokhotin, Andrey; Kuleshov, Sergey; Oulianov, Alexei; Safronov, Grigory; Semenov, Sergey; Shreyber, Irina; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Boos, Edouard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Kodolova, Olga; Lokhtin, Igor; Obraztsov, Stepan; Petrushanko, Sergey; Sarycheva, Ludmila; Savrin, Viktor; Snigirev, Alexander; Andreev, Vladimir; Dremin, Igor; Kirakosyan, Martin; Rusakov, Sergey V.; Vinogradov, Alexey; Azhgirey, Igor; Bitioukov, Sergei; Datsko, Kirill; Grishin, Viatcheslav; Kachanov, Vassili; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Slabospitsky, Sergey; Sobol, Andrei; Sytine, Alexandre; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Djordjevic, Milos; Krpic, Dragomir; Maletic, Dimitrije; Milosevic, Jovan; Puzovic, Jovan; Aguilar-Benitez, Manuel; Alcaraz Maestre, Juan; Arce, Pedro; Battilana, Carlo; Calvo, Enrique; Cepeda, Maria; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Diez Pardos, Carmen; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Ferrando, Antonio; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M.; Josa, Maria Isabel; Merino, Gonzalo; Puerta Pelayo, Jesus; Redondo, Ignacio; Romero, Luciano; Santaolalla, Javier; Willmott, Carlos; Albajar, Carmen; de Trocóniz, Jorge F; Cuevas, Javier; Fernandez Menendez, Javier; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Vizan Garcia, Jesus Manuel; Cabrillo, Iban Jose; Calderon, Alicia; Chuang, Shan-Huei; Diaz Merino, Irma; Diez Gonzalez, Carlos; Duarte Campderros, Jordi; Fernandez, Marcos; Gomez, Gervasio; Gonzalez Sanchez, Javier; Gonzalez Suarez, Rebeca; Jorda, Clara; Lobelle Pardo, Patricia; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Martinez Ruiz del Arbol, Pablo; Matorras, Francisco; Rodrigo, Teresa; Ruiz Jimeno, Alberto; Scodellaro, Luca; Sobron Sanudo, Mar; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Auffray, Etiennette; Baillon, Paul; Ball, Austin; Barney, David; Beaudette, Florian; Bell, Alan James; Benedetti, Daniele; Bernet, Colin; Bialas, Wojciech; Bloch, Philippe; Bocci, Andrea; Bolognesi, Sara; Breuker, Horst; Brona, Grzegorz; Bunkowski, Karol; Camporesi, Tiziano; Cano, Eric; Cattai, Ariella; Cerminara, Gianluca; Christiansen, Tim; Coarasa Perez, Jose Antonio; Covarelli, Roberto; Curé, Benoît; Dahms, Torsten; De Roeck, Albert; Elliott-Peisert, Anna; Funk, Wolfgang; Gaddi, Andrea; Gennai, Simone; Gerwig, Hubert; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Glege, Frank; Gomez-Reino Garrido, Robert; Gowdy, Stephen; Guiducci, Luigi; Hansen, Magnus; Hartl, Christian; Harvey, John; Hegner, Benedikt; Henderson, Conor; Hoffmann, Hans Falk; Honma, Alan; Innocente, Vincenzo; Janot, Patrick; Lecoq, Paul; Leonidopoulos, Christos; Lourenco, Carlos; Macpherson, Alick; Maki, Tuula; Malgeri, Luca; Mannelli, Marcello; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Moser, Roland; Mozer, Matthias Ulrich; Mulders, Martijn; Nesvold, Erik; Orsini, Luciano; Perez, Emmanuelle; Petrilli, Achille; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Racz, Attila; Rolandi, Gigi; Rovelli, Chiara; Rovere, Marco; Sakulin, Hannes; Schäfer, Christoph; Schwick, Christoph; Segoni, Ilaria; Sharma, Archana; Siegrist, Patrice; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Spiropulu, Maria; Stöckli, Fabian; Stoye, Markus; Tropea, Paola; Tsirou, Andromachi; Veres, Gabor Istvan; Vichoudis, Paschalis; Voutilainen, Mikko; Zeuner, Wolfram Dietrich; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Gabathuler, Kurt; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; König, Stefan; Kotlinski, Danek; Langenegger, Urs; Meier, Frank; Renker, Dieter; Rohe, Tilman; Sibille, Jennifer; Starodumov, Andrei; Caminada, Lea; Chen, Zhiling; Cittolin, Sergio; Dissertori, Günther; Dittmar, Michael; Eugster, Jürg; Freudenreich, Klaus; Grab, Christoph; Hervé, Alain; Hintz, Wieland; Lecomte, Pierre; Lustermann, Werner; Marchica, Carmelo; Meridiani, Paolo; Milenovic, Predrag; Moortgat, Filip; Nardulli, Alessandro; Nef, Pascal; Nessi-Tedaldi, Francesca; Pape, Luc; Pauss, Felicitas; Punz, Thomas; Rizzi, Andrea; Ronga, Frederic Jean; Sala, Leonardo; Sanchez, Ann - Karin; Sawley, Marie-Christine; Schinzel, Dietrich; Stieger, Benjamin; Tauscher, Ludwig; Thea, Alessandro; Theofilatos, Konstantinos; Treille, Daniel; Weber, Matthias; Wehrli, Lukas; Weng, Joanna; Aguiló, Ernest; Amsler, Claude; Chiochia, Vincenzo; De Visscher, Simon; Favaro, Carlotta; Ivova Rikova, Mirena; Jaeger, Andreas; Millan Mejias, Barbara; Regenfus, Christian; Robmann, Peter; Rommerskirchen, Tanja; Schmidt, Alexander; Tsirigkas, Dimitrios; Wilke, Lotte; Chang, Yuan-Hann; Chen, Kuan-Hsin; Chen, Wan-Ting; Go, Apollo; Kuo, Chia-Ming; Li, Syue-Wei; Lin, Willis; Liu, Ming-Hsiung; Lu, Yun-Ju; Wu, Jing-Han; Yu, Shin-Shan; Bartalini, Paolo; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Hou, George Wei-Shu; Hsiung, Yee; Kao, Kai-Yi; Lei, Yeong-Jyi; Lin, Sheng-Wen; Lu, Rong-Shyang; Shiu, Jing-Ge; Tzeng, Yeng-Ming; Ueno, Koji; Wang, Chin-chi; Wang, Minzu; Wei, Jui-Te; Adiguzel, Aytul; Ayhan, Aydin; Bakirci, Mustafa Numan; Cerci, Salim; Demir, Zahide; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gökbulut, Gül; Güler, Yalcin; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Karaman, Turker; Kayis Topaksu, Aysel; Nart, Alisah; Önengüt, Gülsen; Ozdemir, Kadri; Ozturk, Sertac; Polatöz, Ayse; Sahin, Ozge; Sengul, Ozden; Sogut, Kenan; Tali, Bayram; Topakli, Huseyin; Uzun, Dilber; Vergili, Latife Nukhet; Vergili, Mehmet; Zorbilmez, Caglar; Akin, Ilina Vasileva; Aliev, Takhmasib; Bilmis, Selcuk; Deniz, Muhammed; Gamsizkan, Halil; Guler, Ali Murat; Ocalan, Kadir; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Surat, Ugur Emrah; Yildirim, Eda; Zeyrek, Mehmet; Deliomeroglu, Mehmet; Demir, Durmus; Gülmez, Erhan; Halu, Arda; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Özbek, Melih; Ozkorucuklu, Suat; Sonmez, Nasuf; Levchuk, Leonid; Bell, Peter; Bostock, Francis; Brooke, James John; Cheng, Teh Lee; Cussans, David; Frazier, Robert; Goldstein, Joel; Hansen, Maria; Heath, Greg P.; Heath, Helen F.; Hill, Christopher; Huckvale, Benedickt; Jackson, James; Kreczko, Lukasz; Mackay, Catherine Kirsty; Metson, Simon; Newbold, Dave M.; Nirunpong, Kachanon; Smith, Vincent J.; Ward, Simon; Basso, Lorenzo; Bell, Ken W.; Belyaev, Alexander; Brew, Christopher; Brown, Robert M.; Camanzi, Barbara; Cockerill, David J.A.; Coughlan, John A.; Harder, Kristian; Harper, Sam; Kennedy, Bruce W.; Olaiya, Emmanuel; Petyt, David; Radburn-Smith, Benjamin Charles; Shepherd-Themistocleous, Claire; Tomalin, Ian R.; Womersley, William John; Worm, Steven; Bainbridge, Robert; Ball, Gordon; Ballin, Jamie; Beuselinck, Raymond; Buchmuller, Oliver; Colling, David; Cripps, Nicholas; Cutajar, Michael; Davies, Gavin; Della Negra, Michel; Foudas, Costas; Fulcher, Jonathan; Futyan, David; Guneratne Bryer, Arlo; Hall, Geoffrey; Hatherell, Zoe; Hays, Jonathan; Iles, Gregory; Karapostoli, Georgia; Lyons, Louis; Magnan, Anne-Marie; Marrouche, Jad; Nandi, Robin; Nash, Jordan; Nikitenko, Alexander; Papageorgiou, Anastasios; Pesaresi, Mark; Petridis, Konstantinos; Pioppi, Michele; Raymond, David Mark; Rompotis, Nikolaos; Rose, Andrew; Ryan, Matthew John; Seez, Christopher; Sharp, Peter; Sparrow, Alex; Tapper, Alexander; Tourneur, Stephane; Vazquez Acosta, Monica; Virdee, Tejinder; Wakefield, Stuart; Wardrope, David; Whyntie, Tom; Barrett, Matthew; Chadwick, Matthew; Cole, Joanne; Hobson, Peter R.; Khan, Akram; Kyberd, Paul; Leslie, Dawn; Reid, Ivan; Teodorescu, Liliana; Bose, Tulika; Carrera Jarrin, Edgar; Clough, Andrew; Fantasia, Cory; Heister, Arno; St. John, Jason; Lawson, Philip; Lazic, Dragoslav; Rohlf, James; Sulak, Lawrence; Andrea, Jeremy; Avetisyan, Aram; Bhattacharya, Saptaparna; Chou, John Paul; Cutts, David; Esen, Selda; Ferapontov, Alexey; Heintz, Ulrich; Jabeen, Shabnam; Kukartsev, Gennadiy; Landsberg, Greg; Narain, Meenakshi; Nguyen, Duong; Speer, Thomas; Tsang, Ka Vang; Borgia, Maria Assunta; Breedon, Richard; Calderon De La Barca Sanchez, Manuel; Cebra, Daniel; Chertok, Maxwell; Conway, John; Cox, Peter Timothy; Dolen, James; Erbacher, Robin; Friis, Evan; Ko, Winston; Kopecky, Alexandra; Lander, Richard; Liu, Haidong; Maruyama, Sho; Miceli, Tia; Nikolic, Milan; Pellett, Dave; Robles, Jorge; Schwarz, Thomas; Searle, Matthew; Smith, John; Squires, Michael; Tripathi, Mani; Vasquez Sierra, Ricardo; Veelken, Christian; Andreev, Valeri; Arisaka, Katsushi; Cline, David; Cousins, Robert; Deisher, Amanda; Erhan, Samim; Farrell, Chris; Felcini, Marta; Hauser, Jay; Ignatenko, Mikhail; Jarvis, Chad; Plager, Charles; Rakness, Gregory; Schlein, Peter; Tucker, Jordan; Valuev, Vyacheslav; Wallny, Rainer; Babb, John; Clare, Robert; Ellison, John Anthony; Gary, J William; Giordano, Ferdinando; Hanson, Gail; Jeng, Geng-Yuan; Kao, Shih-Chuan; Liu, Feng; Liu, Hongliang; Luthra, Arun; Nguyen, Harold; Pasztor, Gabriella; Satpathy, Asish; Shen, Benjamin C.; Stringer, Robert; Sturdy, Jared; Sumowidagdo, Suharyo; Wilken, Rachel; Wimpenny, Stephen; Andrews, Warren; Branson, James G.; Dusinberre, Elizabeth; Evans, David; Golf, Frank; Holzner, André; Kelley, Ryan; Lebourgeois, Matthew; Letts, James; Mangano, Boris; Muelmenstaedt, Johannes; Padhi, Sanjay; Palmer, Christopher; Petrucciani, Giovanni; Pi, Haifeng; Pieri, Marco; Ranieri, Riccardo; Sani, Matteo; Sharma, Vivek; Simon, Sean; Tu, Yanjun; Vartak, Adish; Würthwein, Frank; Yagil, Avraham; Barge, Derek; Bellan, Riccardo; Blume, Michael; Campagnari, Claudio; D'Alfonso, Mariarosaria; Danielson, Thomas; Garberson, Jeffrey; Incandela, Joe; Justus, Christopher; Kalavase, Puneeth; Koay, Sue Ann; Kovalskyi, Dmytro; Krutelyov, Vyacheslav; Lamb, James; Lowette, Steven; Pavlunin, Viktor; Rebassoo, Finn; Ribnik, Jacob; Richman, Jeffrey; Rossin, Roberto; Stuart, David; To, Wing; Vlimant, Jean-Roch; Witherell, Michael; Bornheim, Adolf; Bunn, Julian; Gataullin, Marat; Kcira, Dorian; Litvine, Vladimir; Ma, Yousi; Newman, Harvey B.; Rogan, Christopher; Shin, Kyoungha; Timciuc, Vladlen; Traczyk, Piotr; Veverka, Jan; Wilkinson, Richard; Yang, Yong; Zhu, Ren-Yuan; Akgun, Bora; Carroll, Ryan; Ferguson, Thomas; Jang, Dong Wook; Jun, Soon Yung; Liu, Yueh-Feng; Paulini, Manfred; Russ, James; Terentyev, Nikolay; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Dinardo, Mauro Emanuele; Drell, Brian Robert; Edelmaier, Christopher; Ford, William T.; Heyburn, Bernadette; Luiggi Lopez, Eduardo; Nauenberg, Uriel; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Zang, Shi-Lei; Agostino, Lorenzo; Alexander, James; Blekman, Freya; Chatterjee, Avishek; Das, Souvik; Eggert, Nicholas; Fields, Laura Johanna; Gibbons, Lawrence Kent; Heltsley, Brian; Henriksson, Kristofer; Hopkins, Walter; Khukhunaishvili, Aleko; Kreis, Benjamin; Kuznetsov, Valentin; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Puigh, Darren; Riley, Daniel; Ryd, Anders; Saelim, Michael; Shi, Xin; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Vaughan, Jennifer; Weng, Yao; Wittich, Peter; Biselli, Angela; Cirino, Guy; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Apollinari, Giorgio; Atac, Muzaffer; Bakken, Jon Alan; Banerjee, Sunanda; Bauerdick, Lothar A.T.; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C.; Bloch, Ingo; Borcherding, Frederick; Burkett, Kevin; Butler, Joel Nathan; Chetluru, Vasundhara; Cheung, Harry; Chlebana, Frank; Cihangir, Selcuk; Demarteau, Marcel; Eartly, David P.; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Gottschalk, Erik; Green, Dan; Gutsche, Oliver; Hahn, Alan; Hanlon, Jim; Harris, Robert M.; Hirschauer, James; James, Eric; Jensen, Hans; Johnson, Marvin; Joshi, Umesh; Khatiwada, Rakshya; Kilminster, Benjamin; Klima, Boaz; Kousouris, Konstantinos; Kunori, Shuichi; Kwan, Simon; Limon, Peter; Lipton, Ron; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Mason, David; McBride, Patricia; McCauley, Thomas; Miao, Ting; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Newman-Holmes, Catherine; O'Dell, Vivian; Popescu, Sorina; Pordes, Ruth; Prokofyev, Oleg; Saoulidou, Niki; Sexton-Kennedy, Elizabeth; Sharma, Seema; Smith, Richard P.; Soha, Aron; Spalding, William J.; Spiegel, Leonard; Tan, Ping; Taylor, Lucas; Tkaczyk, Slawek; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Whitmore, Juliana; Wu, Weimin; Yumiceva, Francisco; Yun, Jae Chul; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Chen, Mingshui; Di Giovanni, Gian Piero; Dobur, Didar; Drozdetskiy, Alexey; Field, Richard D.; Fisher, Matthew; Fu, Yu; Furic, Ivan-Kresimir; Gartner, Joseph; Kim, Bockjoo; Klimenko, Sergey; Konigsberg, Jacobo; Korytov, Andrey; Kotov, Khristian; Kropivnitskaya, Anna; Kypreos, Theodore; Matchev, Konstantin; Mitselmakher, Guenakh; Muniz, Lana; Pakhotin, Yuriy; Piedra Gomez, Jonatan; Prescott, Craig; Remington, Ronald; Schmitt, Michael; Scurlock, Bobby; Sellers, Paul; Wang, Dayong; Yelton, John; Zakaria, Mohammed; Ceron, Cristobal; Gaultney, Vanessa; Kramer, Laird; Lebolo, Luis Miguel; Linn, Stephan; Markowitz, Pete; Martinez, German; Mesa, Dalgis; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Chen, Jie; Diamond, Brendan; Gleyzer, Sergei V; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Jenkins, Merrill; Johnson, Kurtis F.; Prosper, Harrison; Sekmen, Sezen; Veeraraghavan, Venkatesh; Baarmand, Marc M.; Guragain, Samir; Hohlmann, Marcus; Kalakhety, Himali; Mermerkaya, Hamit; Ralich, Robert; Vodopiyanov, Igor; Adams, Mark Raymond; Anghel, Ioana Maria; Apanasevich, Leonard; Bazterra, Victor Eduardo; Betts, Russell Richard; Callner, Jeremy; Cavanaugh, Richard; Dragoiu, Cosmin; Garcia-Solis, Edmundo Javier; Gerber, Cecilia Elena; Hofman, David Jonathan; Khalatyan, Samvel; Lacroix, Florent; Shabalina, Elizaveta; Smoron, Agata; Strom, Derek; Varelas, Nikos; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Cankocak, Kerem; Clarida, Warren; Duru, Firdevs; Lae, Chung Khim; McCliment, Edward; Merlo, Jean-Pierre; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Newsom, Charles Ray; Norbeck, Edwin; Olson, Jonathan; Onel, Yasar; Ozok, Ferhat; Sen, Sercan; Wetzel, James; Yetkin, Taylan; Yi, Kai; Barnett, Bruce Arnold; Blumenfeld, Barry; Bonato, Alessio; Eskew, Christopher; Fehling, David; Giurgiu, Gavril; Gritsan, Andrei; Guo, Zijin; Hu, Guofan; Maksimovic, Petar; Rappoccio, Salvatore; Swartz, Morris; Tran, Nhan Viet; Whitbeck, Andrew; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Grachov, Oleg; Murray, Michael; Radicci, Valeria; Sanders, Stephen; Wood, Jeffrey Scott; Zhukova, Victoria; Bandurin, Dmitry; Bolton, Tim; Chakaberia, Irakli; Ivanov, Andrew; Kaadze, Ketino; Maravin, Yurii; Shrestha, Shruti; Svintradze, Irakli; Wan, Zongru; Gronberg, Jeffrey; Lange, David; Wright, Douglas; Baden, Drew; Boutemeur, Madjid; Eno, Sarah Catherine; Ferencek, Dinko; Hadley, Nicholas John; Kellogg, Richard G.; Kirn, Malina; Lu, Ying; Mignerey, Alice; Rossato, Kenneth; Rumerio, Paolo; Santanastasio, Francesco; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite; Tonwar, Suresh C.; Twedt, Elizabeth; Alver, Burak; Bauer, Gerry; Bendavid, Joshua; Busza, Wit; Butz, Erik; Cali, Ivan Amos; Chan, Matthew; D'Enterria, David; Everaerts, Pieter; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Hahn, Kristan Allan; Harris, Philip; Kim, Yongsun; Klute, Markus; Lee, Yen-Jie; Li, Wei; Loizides, Constantinos; Luckey, Paul David; Ma, Teng; Nahn, Steve; Paus, Christoph; Roland, Christof; Roland, Gunther; Rudolph, Matthew; Stephans, George; Sumorok, Konstanty; Sung, Kevin; Wenger, Edward Allen; Wyslouch, Bolek; Xie, Si; Yang, Mingming; Yilmaz, Yetkin; Yoon, Sungho; Zanetti, Marco; Cole, Perrie; Cooper, Seth; Cushman, Priscilla; Dahmes, Bryan; De Benedetti, Abraham; Dudero, Phillip Russell; Franzoni, Giovanni; Haupt, Jason; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Rekovic, Vladimir; Rusack, Roger; Sasseville, Michael; Singovsky, Alexander; Cremaldi, Lucien Marcus; Godang, Romulus; Kroeger, Rob; Perera, Lalith; Rahmat, Rahmat; Sanders, David A; Sonnek, Peter; Summers, Don; Bloom, Kenneth; Bose, Suvadeep; Butt, Jamila; Claes, Daniel R.; Dominguez, Aaron; Eads, Michael; Keller, Jason; Kelly, Tony; Kravchenko, Ilya; Lazo-Flores, Jose; Lundstedt, Carl; Malbouisson, Helena; Malik, Sudhir; Snow, Gregory R.; Baur, Ulrich; Iashvili, Ia; Kharchilava, Avto; Kumar, Ashish; Smith, Kenneth; Zennamo, Joseph; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Boeriu, Oana; Chasco, Matthew; Reucroft, Steve; Swain, John; Wood, Darien; Zhang, Jinzhong; Anastassov, Anton; Kubik, Andrew; Ofierzynski, Radoslaw Adrian; Pozdnyakov, Andrey; Schmitt, Michael; Stoynev, Stoyan; Velasco, Mayda; Won, Steven; Antonelli, Louis; Berry, Douglas; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kolb, Jeff; Kolberg, Ted; Lannon, Kevin; Lynch, Sean; Marinelli, Nancy; Morse, David Michael; Ruchti, Randy; Slaunwhite, Jason; Valls, Nil; Warchol, Jadwiga; Wayne, Mitchell; Ziegler, Jill; Bylsma, Ben; Durkin, Lloyd Stanley; Gu, Jianhui; Killewald, Phillip; Ling, Ta-Yung; Rodenburg, Marissa; Williams, Grayson; Adam, Nadia; Berry, Edmund; Elmer, Peter; Gerbaudo, Davide; Halyo, Valerie; Hunt, Adam; Jones, John; Laird, Edward; Lopes Pegna, David; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zuranski, Andrzej; Acosta, Jhon Gabriel; Huang, Xing Tao; Lopez, Angel; Mendez, Hector; Oliveros, Sandra; Ramirez Vargas, Juan Eduardo; Zatserklyaniy, Andriy; Alagoz, Enver; Barnes, Virgil E.; Bolla, Gino; Borrello, Laura; Bortoletto, Daniela; Everett, Adam; Garfinkel, Arthur F.; Gecse, Zoltan; Gutay, Laszlo; Jones, Matthew; Koybasi, Ozhan; Laasanen, Alvin T.; Leonardo, Nuno; Liu, Chang; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Potamianos, Karolos; Shipsey, Ian; Silvers, David; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Jindal, Pratima; Parashar, Neeti; Cuplov, Vesna; Ecklund, Karl Matthew; Geurts, Frank J.M.; Liu, Jinghua H.; Morales, Jafet; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Betchart, Burton; Bodek, Arie; Chung, Yeon Sei; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Flacher, Henning; Garcia-Bellido, Aran; Goldenzweig, Pablo; Gotra, Yury; Han, Jiyeon; Harel, Amnon; Miner, Daniel Carl; Orbaker, Douglas; Petrillo, Gianluca; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Demortier, Luc; Goulianos, Konstantin; Hatakeyama, Kenichi; Lungu, Gheorghe; Mesropian, Christina; Yan, Ming; Atramentov, Oleksiy; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Hits, Dmitry; Lath, Amitabh; Rose, Keith; Schnetzer, Steve; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Cerizza, Giordano; Hollingsworth, Matthew; Spanier, Stefan; Yang, Zong-Chang; York, Andrew; Asaadi, Jonathan; Eusebi, Ricardo; Gilmore, Jason; Gurrola, Alfredo; Kamon, Teruki; Khotilovich, Vadim; Montalvo, Roy; Nguyen, Chi Nhan; Pivarski, James; Safonov, Alexei; Sengupta, Sinjini; Toback, David; Weinberger, Michael; Akchurin, Nural; Bardak, Cemile; Damgov, Jordan; Jeong, Chiyoung; Kovitanggoon, Kittikul; Lee, Sung Won; Mane, Poonam; Roh, Youn; Sill, Alan; Volobouev, Igor; Wigmans, Richard; Yazgan, Efe; Appelt, Eric; Brownson, Eric; Engh, Daniel; Florez, Carlos; Gabella, William; Johns, Willard; Kurt, Pelin; Maguire, Charles; Melo, Andrew; Sheldon, Paul; Velkovska, Julia; Arenton, Michael Wayne; Balazs, Michael; Boutle, Sarah; Buehler, Marc; Conetti, Sergio; Cox, Bradley; Hirosky, Robert; Ledovskoy, Alexander; Neu, Christopher; Yohay, Rachel; Gollapinni, Sowjanya; Gunthoti, Kranti; Harr, Robert; Karchin, Paul Edmund; Mattson, Mark; Milstène, Caroline; Sakharov, Alexandre; Anderson, Michael; Bachtis, Michail; Bellinger, James Nugent; Carlsmith, Duncan; Dasu, Sridhara; Dutta, Suchandra; Efron, Jonathan; Gray, Lindsey; Grogg, Kira Suzanne; Grothe, Monika; Herndon, Matthew; Klabbers, Pamela; Klukas, Jeffrey; Lanaro, Armando; Lazaridis, Christos; Leonard, Jessica; Lomidze, David; Loveless, Richard; Mohapatra, Ajit; Polese, Giovanni; Reeder, Don; Savin, Alexander; Smith, Wesley H.; Swanson, Joshua; Weinberg, Marc

    2010-01-01

    The first LHC pp collisions at centre-of-mass energies of 0.9 and 2.36 TeV were recorded by the CMS detector in December 2009. The trajectories of charged particles produced in the collisions were reconstructed using the all-silicon Tracker and their momenta were measured in the 3.8 T axial magnetic field. Results from the Tracker commissioning are presented including studies of timing, efficiency, signal-to-noise, resolution, and ionization energy. Reconstructed tracks are used to benchmark the performance in terms of track and vertex resolutions, reconstruction of decays, estimation of ionization energy loss, as well as identification of photon conversions, nuclear interactions, and heavy-flavour decays.

  10. Optimization Controller for Mechatronic Sun Tracking System to Improve Performance

    Directory of Open Access Journals (Sweden)

    Mustafa Engin

    2013-01-01

    Full Text Available An embedded system that contains hardware and software was developed for two-axis solar tracking system to improve photovoltaic panel utilization. The hardware section of the embedded system consists of a 32-bit ARM core microcontroller, motor driver circuits, a motion control unit, pyranometer, GPS receiver, and an anemometer. The real-time control algorithm enables the solar tracker to operate automatically without external control as a stand-alone system, combining the advantages of the open-loop and the closed-loop control methods. The pyranometer is employed to continuously send radiation data to the controller if the measured radiation is above the lower radiation limit the photovoltaic panel can generate power, guaranteeing the solar tracking process to be highly efficient. The anemometer is utilized in the system to ensure that the solar tracking procedure halts under high wind speed conditions to protect the entire system. Latitude, longitude, altitude, date, and real-time clock data are provided by GPS receiver. The algorithm calculates solar time using astronomical equations with GPS data and converts it to pulse-width modulated motor control signal. The overall objective of this study is to develop a control algorithm that improves performance and reliability of the two-axis solar tracker, focusing on optimization of the controller board, drive hardware, and software.

  11. Geometric Templates for Improved Tracking Performance in Monte Carlo Codes

    Science.gov (United States)

    Nease, Brian R.; Millman, David L.; Griesheimer, David P.; Gill, Daniel F.

    2014-06-01

    One of the most fundamental parts of a Monte Carlo code is its geometry kernel. This kernel not only affects particle tracking (i.e., run-time performance), but also shapes how users will input models and collect results for later analyses. A new framework based on geometric templates is proposed that optimizes performance (in terms of tracking speed and memory usage) and simplifies user input for large scale models. While some aspects of this approach currently exist in different Monte Carlo codes, the optimization aspect has not been investigated or applied. If Monte Carlo codes are to be realistically used for full core analysis and design, this type of optimization will be necessary. This paper describes the new approach and the implementation of two template types in MC21: a repeated ellipse template and a box template. Several different models are tested to highlight the performance gains that can be achieved using these templates. Though the exact gains are naturally problem dependent, results show that runtime and memory usage can be significantly reduced when using templates, even as problems reach realistic model sizes.

  12. Design and performance comparison of fuzzy logic based tracking controllers

    Science.gov (United States)

    Lea, Robert N.; Jani, Yashvant

    1992-01-01

    Several camera tracking controllers based on fuzzy logic principles have been designed and tested in software simulation in the software technology branch at the Johnson Space Center. The fuzzy logic based controllers utilize range measurement and pixel positions from the image as input parameters and provide pan and tilt gimble rate commands as output. Two designs of the rulebase and tuning process applied to the membership functions are discussed in light of optimizing performance. Seven test cases have been designed to test the performance of the controllers for proximity operations where approaches like v-bar, fly-around and station keeping are performed. The controllers are compared in terms of responsiveness, and ability to maintain the object in the field-of-view of the camera. Advantages of the fuzzy logic approach with respect to the conventional approach have been discussed in terms of simplicity and robustness.

  13. Radiosonde pressure sensor performance - Evaluation using tracking radars

    Science.gov (United States)

    Parsons, C. L.; Norcross, G. A.; Brooks, R. L.

    1984-01-01

    The standard balloon-borne radiosonde employed for synoptic meteorology provides vertical profiles of temperature, pressure, and humidity as a function of elapsed time. These parameters are used in the hypsometric equation to calculate the geopotential altitude at each sampling point during the balloon's flight. It is important that the vertical location information be accurate. The present investigation was conducted with the objective to evaluate the altitude determination accuracy of the standard radiosonde throughout the entire balloon profile. The tests included two other commercially available pressure sensors to see if they could provide improved accuracy in the stratosphere. The pressure-measuring performance of standard baroswitches, premium baroswitches, and hypsometers in balloon-borne sondes was correlated with tracking radars. It was found that the standard and premium baroswitches perform well up to about 25 km altitude, while hypsometers provide more reliable data above 25 km.

  14. Insights into collaborative separation process of photogenerated charges and superior performance of solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiangyang, E-mail: lxy081276@126.com; Wang, Shun; Zheng, Haiwu; Gu, Yuzong [Institute of Microsystems Physics and School of Physics and Electronics, Henan University, Kaifeng 475004 (China)

    2016-07-25

    ZnO nanowires/Cu{sub 4}Bi{sub 4}S{sub 9} (ZnO/CBS) and ZnO nanowires/CBS-graphene nanoplates (ZnO/CBS-GNs), as well as two types of solar cells were prepared. The photovoltaic responses of CBS-GNs and ZnO/CBS-GNs can be improved with incorporation of GNs. The transient surface photovoltage (TPV) can provide detailed information on the separation and transport of photogenerated carriers. The multichannel separation process from the TPVs indicates that the macro-photoelectric signals can be attributed to the photogenerated charges separated at the interface of CBS/GNs, rather than CBS/ZnO. The multi-interfacial recombination is the major carrier loss, and the hole selective p-V{sub 2}O{sub 5} can efficiently accelerate the charge extraction to the external circuit. The ZnO/CBS-GNs cell exhibits the superior performance, and the highest efficiency is 10.9%. With the adequate interfaces of CBS/GNs, GNs conductive network, energy level matching, etc., the excitons can easily diffuse to the interface of CBS/GNs, and the separated electrons and holes can be collected quickly, inducing the high photoelectric properties. Here, a facile strategy for solid state solar cells with superior performance presents a potential application.

  15. A new C=C embedded porphyrin sheet with superior oxygen reduction performance

    Institute of Scientific and Technical Information of China (English)

    Yawei Li[1; Shunhong Zhang[2; Jiabing Yu[1; Qian Wang[2; Qiang Sun[1,2,3; Puru Jena[3

    2015-01-01

    C2 is a well-known pseudo-oxygen unit with an electron affinity of 3.4 eV. We show that it can exhibit metal-ion like behavior when embedded in a porphyrin sheet and form a metal-free two-dimensional material with superior oxygen reduction performance. Here, the positively charged C=C units are highly active for oxygen reduction reaction (ORR) via dissociation pathways with a small energy barrier of 0.09 eV, much smaller than that of other non-platinum group metal (non-PGM) ORR catalysts. Using a microkinetics-based model we calculated the partial current density to be 3.0 mA/cm2 at 0.65 V vs. a standard hydrogen electrode (SHE), which is comparable to that of the state-of-the-art Pt/C catalyst. We further confirm that the C=C embedded porphyrin sheet is dynamically and thermally stable with a quasi-direct band gap of 1.14 eV. The superior catalytic performance and geometric stability make the metal-free C=C porphyrin sheet ideal for fuel cell applications.

  16. Insights into collaborative separation process of photogenerated charges and superior performance of solar cells

    Science.gov (United States)

    Liu, Xiangyang; Wang, Shun; Zheng, Haiwu; Gu, Yuzong

    2016-07-01

    ZnO nanowires/Cu4Bi4S9 (ZnO/CBS) and ZnO nanowires/CBS-graphene nanoplates (ZnO/CBS-GNs), as well as two types of solar cells were prepared. The photovoltaic responses of CBS-GNs and ZnO/CBS-GNs can be improved with incorporation of GNs. The transient surface photovoltage (TPV) can provide detailed information on the separation and transport of photogenerated carriers. The multichannel separation process from the TPVs indicates that the macro-photoelectric signals can be attributed to the photogenerated charges separated at the interface of CBS/GNs, rather than CBS/ZnO. The multi-interfacial recombination is the major carrier loss, and the hole selective p-V2O5 can efficiently accelerate the charge extraction to the external circuit. The ZnO/CBS-GNs cell exhibits the superior performance, and the highest efficiency is 10.9%. With the adequate interfaces of CBS/GNs, GNs conductive network, energy level matching, etc., the excitons can easily diffuse to the interface of CBS/GNs, and the separated electrons and holes can be collected quickly, inducing the high photoelectric properties. Here, a facile strategy for solid state solar cells with superior performance presents a potential application.

  17. STRATEGIES FOR SUPERIOR PERFORMANCE IN RECESSIONS: PRO OR COUNTER-CYCLICAL?

    Directory of Open Access Journals (Sweden)

    Claudio Ramos Conti

    2015-04-01

    Full Text Available Recessions are recurring events in which most firms suffer severe impacts while others are less affected or may even prosper. Strategic management has made little progress in understanding such performance differences. In a scenario of decreased demand, intensified competition, and higher uncertainty, most firms try to survive by pro-cyclically cutting costs and investments. But firms could take advantage of undervalued resources in the market to counter-cyclically invest in new business opportunities to overtake competitors. We survey Brazilian firms in various industries about the 2008-2009 recession and analyze data using PLS-SEM. We find that while most firms pro-cyclically reduce costs and investments in recessions, a counter-cyclical strategy of investing in opportunities created by changes in the market enables superior performance. Most successful are firms with a propensity to recognize opportunities, an entrepreneurial orientation to invest, and the flexibility to efficiently implement investments.

  18. FEEDFORWARD CONTROL STRATEGIES FOR TRACKING PERFORMANCE IN MACHINE AXES

    Institute of Scientific and Technical Information of China (English)

    Wei Zhouhong; Schinstock Dale E

    2005-01-01

    Three feedforward (FFD) control techniques for position-servo machine axes are compared. All three FFD controllers are used with two different PID feedback (FBK) controllers. The two different FBK controllers have two different closed-loop bandwidths. They are demonstrated using experimental data from a linear motor test system and from simulations. Laboratory results using the linear motor hardware demonstrate that the velocity & acceleration (V&A) FFD controller improves tracking in all case considered, while the other two FFD controllers actually degrade performance in many cases. Through simulation this degradation is attributed to extreme sensitivity to round off errors. This sensitivity is the result of a complex controller that is implemented outside of the feedback loop.

  19. Mechanisms of Vertical Fusional Vergence in Patients With “Congenital Superior Oblique Paresis” Investigated With an Eye-Tracking Haploscope

    Science.gov (United States)

    Irsch, Kristina; Guyton, David L.; Park, Hee-Jung S.; Ying, Howard S.

    2015-01-01

    Purpose To determine the mechanisms of vertical fusional vergence in patients with “congenital unilateral superior oblique paresis” (SOP) and to discuss the implications of these mechanisms. Methods Eleven patients were examined with our eye-tracking haploscope. Results Three different fusion mechanisms were found, producing significantly different cyclovergence to vertical vergence ratios (P eye and the superior rectus muscle in the lower eye in three patients (1.15 ± 0.32). Lancaster red-green testing showed alignment differences among these groups, primarily differences in amount of subjective extorsion between the two eyes in straight-ahead gaze: The patient with oblique-muscle–mediated fusion showed essentially no subjective extorsion (0.5°), the patients with vertical-rectus-muscle–mediated vertical fusion showed a mean ± SD subjective extorsion of 3.6° ± 1.4°, and the patients with the mixed (oblique/rectus) fusion mechanism showed 7.0° ± 1.7° (P eye and the superior rectus muscle in the lower eye provides the greatest intorting effect. Subclassifying “congenital SOP” in this way (in which the “paretic” muscle may remain functional in many cases) may help guide its optimal surgical correction. PMID:26275134

  20. Nanotubes within transition metal silicate hollow spheres: Facile preparation and superior lithium storage performances

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Fan; An, Yongling; Zhai, Wei; Gao, Xueping [Key Laboratory for Liquid–Solid Structural Evolution & Processing of Materials (Ministry of Education), Jinan 250100 (China); Feng, Jinkui, E-mail: jinkui@sdu.edu.cn [Key Laboratory for Liquid–Solid Structural Evolution & Processing of Materials (Ministry of Education), Jinan 250100 (China); Ci, Lijie [Key Laboratory for Liquid–Solid Structural Evolution & Processing of Materials (Ministry of Education), Jinan 250100 (China); Xiong, Shenglin [School of Materials Science and Engineering, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China)

    2015-10-15

    Highlights: • The hollow Co{sub 2}SiO{sub 4}, MnSiO{sub 3} and CuSiO{sub 3} were successfully prepared by a facile hydrothermal method using SiO{sub 2} nanosphere. • The hollow Co{sub 2}SiO{sub 4}, MnSiO{sub 3} and CuSiO{sub 3} were tested as anode materials for lithium batteries. • The hollow Co{sub 2}SiO{sub 4}, MnSiO{sub 3} and CuSiO{sub 3} delivered superior electrochemical performance. • The lithium storage mechanism is probe via cyclic voltammetry and XPS. - Abstract: A series of transition metal silicate hollow spheres, including cobalt silicate (Co{sub 2}SiO{sub 4}), manganese silicate (MnSiO{sub 3}) and copper silicate (CuSiO{sub 3}.2H{sub 2}O, CuSiO{sub 3} as abbreviation in the text) were prepared via a simple and economic hydrothermal method by using silica spheres as chemical template. Time-dependent experiments confirmed that the resultants formed a novel type of hierarchical structure, hollow spheres assembled by numerous one-dimensional (1D) nanotubes building blocks. For the first time, the transition metal silicate hollow spheres were characterized as novel anode materials of Li-ion battery, which presented superior lithium storage capacities, cycle performance and rate performance. The 1D nanotubes assembly and hollow interior endow this kind of material facilitate fast lithium ion and electron transport and accommodate the big volume change during the conversion reactions. Our study shows that low-cost transition metal silicate with rationally designed nanostructures can be promising anode materials for high capacity lithium-ion battery.

  1. Oxygen vacancy induced bismuth oxyiodide with remarkably increased visible-light absorption and superior photocatalytic performance.

    Science.gov (United States)

    Huang, Yongchao; Li, Haibo; Balogun, Muhammad-Sadeeq; Liu, Wenyue; Tong, Yexiang; Lu, Xihong; Ji, Hongbing

    2014-12-24

    With the increasingly serious environmental problems, photocatalysis has recently attracted a great deal of attention, with particular focus on water and air purification and disinfection. Herein, we show an electroreduction strategy to improve significantly the solar absorption and donor density of BiOI nanosheet photocatalyst by introducing oxygen vacancies. These oxygen-deficient BiOI nanosheets exhibit an unexpected red shift of about 100 nm in light absorption band and 1 order of magnitude improvement in donor density compared to the untreated BiOI nanosheets and show 10 times higher photocatalytic activity than the untreated BiOI nanosheets for methyl orange (MO) degradation under visible light irradiation. Moreover, the as-prepared oxygen-deficient BiOI nanosheets also have excellent cycling stability and superior photocatalytic performance toward other dye pollutants.

  2. Development of an Enhanced Payback Function for the Superior Energy Performance Program

    Energy Technology Data Exchange (ETDEWEB)

    Therkelsen, Peter; Rao, Prakash; McKane, Aimee; Sabouni, Ridah; Sheihing, Paul

    2015-08-03

    The U.S. DOE Superior Energy Performance (SEP) program provides recognition to industrial and commercial facilities that achieve certification to the ISO 50001 energy management system standard and third party verification of energy performance improvements. Over 50 industrial facilities are participating and 28 facilities have been certified in the SEP program. These facilities find value in the robust, data driven energy performance improvement result that the SEP program delivers. Previous analysis of SEP certified facility data demonstrated the cost effectiveness of SEP and identified internal staff time to be the largest cost component related to SEP implementation and certification. This paper analyzes previously reported and newly collected data of costs and benefits associated with the implementation of an ISO 50001 and SEP certification. By disaggregating “sunk energy management system (EnMS) labor costs”, this analysis results in a more accurate and detailed understanding of the costs and benefits of SEP participation. SEP is shown to significantly improve and sustain energy performance and energy cost savings, resulting in a highly attractive return on investment. To illustrate these results, a payback function has been developed and is presented. On average facilities with annual energy spend greater than $2M can expect to implement SEP with a payback of less than 1.5 years. Finally, this paper also observes and details decreasing facility costs associated with implementing ISO 50001 and certifying to the SEP program, as the program has improved from pilot, to demonstration, to full launch.

  3. Performance Characteristics of Small Global-Positioning-System Tracking Collars

    Directory of Open Access Journals (Sweden)

    T. Dennis

    2010-06-01

    Full Text Available Recent technological advances have made possible the development of animal-tracking devices based on the global positioning system (GPS that are much smaller than what were available previously. However, potential limitations in size-dependent technologies and differences in patterns of behavior between small and large animals could mean that miniaturized GPS tracking devices may not function as well as their larger counterparts. Here, we evaluate the performance characteristics of 105-g GPS collars suitable for prolonged use on animals weighing as little as 2.5 kg. We tested 9 collars in stationary trials at a single reference site and in field deployments on common brushtail possums ( Trichosurus vulpecula/ , a semi-arboreal, nocturnal marsupial. We found in both trials that individual collars differed in several measures of positional accuracy and precision, yet overall the small collars compared favorably with published results of larger devices in similar habitats. Differences in operational characteristics between the two trials were mainly in the number and spatial configuration of satellites used to calculate position fixes, resulting in an increase in median location error from 9.8 m in the stationary tests to an estimated 14.7 m in the field trials. Most probably, these effects were due to dissimilarities in microhabitat features and variation in the orientation of GPS antennae which occurred when the possums changed their body posture during movement. The collars evaluated in this study promise to be a valuable tool for the study of the ecology, behavior, and conservation of many small-to-medium sized animals.

  4. Identifying blood biomarkers and physiological processes that distinguish humans with superior performance under psychological stress.

    Directory of Open Access Journals (Sweden)

    Amanda M Cooksey

    Full Text Available BACKGROUND: Attrition of students from aviation training is a serious financial and operational concern for the U.S. Navy. Each late stage navy aviator training failure costs the taxpayer over $1,000,000 and ultimately results in decreased operational readiness of the fleet. Currently, potential aviators are selected based on the Aviation Selection Test Battery (ASTB, which is a series of multiple-choice tests that evaluate basic and aviation-related knowledge and ability. However, the ASTB does not evaluate a person's response to stress. This is important because operating sophisticated aircraft demands exceptional performance and causes high psychological stress. Some people are more resistant to this type of stress, and consequently better able to cope with the demands of naval aviation, than others. METHODOLOGY/PRINCIPAL FINDINGS: Although many psychological studies have examined psychological stress resistance none have taken advantage of the human genome sequence. Here we use high-throughput -omic biology methods and a novel statistical data normalization method to identify plasma proteins associated with human performance under psychological stress. We identified proteins involved in four basic physiological processes: innate immunity, cardiac function, coagulation and plasma lipid physiology. CONCLUSIONS/SIGNIFICANCE: The proteins identified here further elucidate the physiological response to psychological stress and suggest a hypothesis that stress-susceptible pilots may be more prone to shock. This work also provides potential biomarkers for screening humans for capability of superior performance under stress.

  5. Nanocomposites of graphene oxide and upconversion rare-earth nanocrystals with superior optical limiting performance

    KAUST Repository

    Wei, Wei

    2012-04-20

    Upconversion rare-earth nanomaterials (URENs) possess highly efficient near-infrared (NIR), e.g., 980 nm, laser absorption and unique energy upconversion capabilities. On the other hand, graphene and its derivatives, such as graphene oxide (GO), show excellent performance in optical limiting (OL); however, the wavelengths of currently used lasers for OL studies mainly focus on either 532 or 1064 nm. To design new-generation OL materials working at other optical regions, such as the NIR, a novel nanocomposites, GO-URENs, which combines the advantages of both its components, is synthesized by a one-step chemical reaction. Transmission electron microscopy, X-ray diffraction, infrared spectroscopy, and fluorescence studies prove that the α-phase URENs uniformly attach on the GO surface via covalent chemical bonding, which assures highly efficient energy transfer between URENs and GO, and also accounts for the significantly improved OL performance compared to either GO or URENs. The superior OL effect is also observed in the proof-of-concept thin-film product, suggesting immediate applications in making high-performance laser-protecting products and optoelectronic devices. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Identifying Blood Biomarkers and Physiological Processes That Distinguish Humans with Superior Performance under Psychological Stress

    Science.gov (United States)

    Cooksey, Amanda M.; Momen, Nausheen; Stocker, Russell; Burgess, Shane C.

    2009-01-01

    Background Attrition of students from aviation training is a serious financial and operational concern for the U.S. Navy. Each late stage navy aviator training failure costs the taxpayer over $1,000,000 and ultimately results in decreased operational readiness of the fleet. Currently, potential aviators are selected based on the Aviation Selection Test Battery (ASTB), which is a series of multiple-choice tests that evaluate basic and aviation-related knowledge and ability. However, the ASTB does not evaluate a person's response to stress. This is important because operating sophisticated aircraft demands exceptional performance and causes high psychological stress. Some people are more resistant to this type of stress, and consequently better able to cope with the demands of naval aviation, than others. Methodology/Principal Findings Although many psychological studies have examined psychological stress resistance none have taken advantage of the human genome sequence. Here we use high-throughput -omic biology methods and a novel statistical data normalization method to identify plasma proteins associated with human performance under psychological stress. We identified proteins involved in four basic physiological processes: innate immunity, cardiac function, coagulation and plasma lipid physiology. Conclusions/Significance The proteins identified here further elucidate the physiological response to psychological stress and suggest a hypothesis that stress-susceptible pilots may be more prone to shock. This work also provides potential biomarkers for screening humans for capability of superior performance under stress. PMID:20020041

  7. The effect of visual distinctiveness on multiple object tracking performance.

    Science.gov (United States)

    Howe, Piers D L; Holcombe, Alex O

    2012-01-01

    Observers often need to attentively track moving objects. In everyday life, such objects are often visually distinctive. Previous studies have shown that tracking accuracy is increased when the targets contain a visual feature (e.g., a color) not possessed by the distractors. Conversely, a gain in tracking accuracy was not observed when the targets differed from the distractors by only a conjunction of features (Makovski and Jiang, 2009a). In this study we confirm that some conjunction targets have relatively little effect on tracking accuracy, but show that other conjunction targets can significantly aid tracking. For example, tracking accuracy is relatively high when the targets are small red squares and half the distractors are large red squares while the remaining distractors are small green squares. This seems to occur because the targets have a set of features (small and red) not shared by any one distractor. Attending to these features directs attention more to the targets than the distractors, thereby making the targets easier to track. Existing theories of attentive tracking cannot explain these results.

  8. Testing the performance of technical trading rules in the Chinese markets based on superior predictive test

    Science.gov (United States)

    Wang, Shan; Jiang, Zhi-Qiang; Li, Sai-Ping; Zhou, Wei-Xing

    2015-12-01

    Technical trading rules have a long history of being used by practitioners in financial markets. The profitable ability and efficiency of technical trading rules are yet controversial. In this paper, we test the performance of more than seven thousand traditional technical trading rules on the Shanghai Securities Composite Index (SSCI) from May 21, 1992 through June 30, 2013 and China Securities Index 300 (CSI 300) from April 8, 2005 through June 30, 2013 to check whether an effective trading strategy could be found by using the performance measurements based on the return and Sharpe ratio. To correct for the influence of the data-snooping effect, we adopt the Superior Predictive Ability test to evaluate if there exists a trading rule that can significantly outperform the benchmark. The result shows that for SSCI, technical trading rules offer significant profitability, while for CSI 300, this ability is lost. We further partition the SSCI into two sub-series and find that the efficiency of technical trading in sub-series, which have exactly the same spanning period as that of CSI 300, is severely weakened. By testing the trading rules on both indexes with a five-year moving window, we find that during the financial bubble from 2005 to 2007, the effectiveness of technical trading rules is greatly improved. This is consistent with the predictive ability of technical trading rules which appears when the market is less efficient.

  9. Rational design of reduced graphene oxide for superior performance of supercapacitor electrodes

    KAUST Repository

    Rasul, Shahid

    2016-10-24

    Strategies to synthesize reduced graphene oxide (rGO) abound but, in most studies, research teams select one particular oxidation-reduction method without providing a methodic reasoning for doing so. Herein, it is analyzed how diverse oxidation-reduction strategies commonly used can result in considerable performance differences of rGO for supercapacitor applications. Depending on the graphite oxidation method followed, the surface chemistry analysis of the products confirms that there is a marked disparity in the degree of oxidation and the nature of the oxygen functional groups present. Subsequent reduction of the oxidized graphite (using three different methods) showed that the maximum specific capacitance of rGOs produced from the classical Hummers\\' method was 128 F g−1 whereas an analogous material obtained from an improved Hummers\\' method reached ∼274 F g−1 (both via an hydrothermal reduction route). Besides showing that the improved oxidation method results in superior capacitance performance, explained by the higher number of structural defects allied to a surface chemistry where residual hydroxyl and epoxy functional groups predominate, this study highlights the need to rationalize the oxidation-reduction strategies followed when investigating applications of rGO materials.

  10. Superior sensory, motor, and cognitive performance in elderly individuals with multi-year dancing activities

    Directory of Open Access Journals (Sweden)

    Jan-Christoph Kattenstroth

    2010-07-01

    Full Text Available Aging is associated with a progressive decline of mental and physical abilities. Considering the current demographic changes in many civilizations there is an urgent need for measures permitting an independent lifestyle into old age. The critical role of physical exercise in mediating and maintaining physical and mental fitness is well-acknowledged. Dance, in addition to physical activity, combines emotions, social interaction, sensory stimulation, motor coordination and music, thereby creating enriched environmental conditions for human individuals. Here we demonstrate the impact of multi-year (average 16.5 years amateur dancing (AD in a group of elderly subjects (aged 65 to 84 years as compared to education-, gender- and aged-matched controls (CG having no record of dancing or sporting activities. Besides posture and balance parameters, we tested reaction times, motor behavior, tactile and cognitive performance. In each of the different domains investigated, the AD group had a superior performance as compared to the non-dancer CG group. Analysis of individual performance revealed that the best participants of the AD group were not better than individuals of the CG group. Instead, the AD group lacked individuals showing poor performance, which was frequently observed for the CG group. This observation implies that maintaining a regular schedule of dancing into old age can preserve cognitive, motor and perceptual abilities and prevent them from degradation. We conclude that the far-reaching beneficial effects found in the AD group make dance, beyond its ability to facilitate balance and posture, a prime candidate for the preservation of everyday life competence of elderly individuals.

  11. Superior sensory, motor, and cognitive performance in elderly individuals with multi-year dancing activities.

    Science.gov (United States)

    Kattenstroth, Jan-Christoph; Kolankowska, Izabella; Kalisch, Tobias; Dinse, Hubert R

    2010-01-01

    Aging is associated with a progressive decline of mental and physical abilities. Considering the current demographic changes in many civilizations there is an urgent need for measures permitting an independent lifestyle into old age. The critical role of physical exercise in mediating and maintaining physical and mental fitness is well-acknowledged. Dance, in addition to physical activity, combines emotions, social interaction, sensory stimulation, motor coordination and music, thereby creating enriched environmental conditions for human individuals. Here we demonstrate the impact of multi-year (average 16.5 years) amateur dancing (AD) in a group of elderly subjects (aged 65-84 years) as compared to education-, gender- and aged-matched controls (CG) having no record of dancing or sporting activities. Besides posture and balance parameters, we tested reaction times, motor behavior, tactile and cognitive performance. In each of the different domains investigated, the AD group had a superior performance as compared to the non-dancer CG group. Analysis of individual performance revealed that the best participants of the AD group were not better than individuals of the CG group. Instead, the AD group lacked individuals showing poor performance, which was frequently observed for the CG group. This observation implies that maintaining a regular schedule of dancing into old age can preserve cognitive, motor and perceptual abilities and prevent them from degradation. We conclude that the far-reaching beneficial effects found in the AD group make dance, beyond its ability to facilitate balance and posture, a prime candidate for the preservation of everyday life competence of elderly individuals.

  12. Designing Appraisal Pattern for Performance of Superior League Football Teams by Emphasizing on Stakeholders’ Benefits

    Directory of Open Access Journals (Sweden)

    Seyed Mehdi TAYEBI

    2016-03-01

    Full Text Available Performance assessment by stakeholders is a strategic process that this research formed based on Freeman Stakeholders’ theory (1986 and Lee Stakeholders’ model and its goal is replying to following questions in order to present proper model for performance assessment: Who are most important stakeholders of superior football teams? What are their most important purposes? What are most important actions for fulfilling their needs? The research information collected from ministry of sport and youth, federation, club universalities, library and f iled experts and in first stage based on Freeman theory and past studies and experts’ opinions, a questionnaire was developed with Cronbach alpha coefficient of 0.891 and by using Shannon entropy model and TOPSIS method extracted 9 priorities out of 21. In second stage, a second questionnaire was developed with Cronbach alpha coefficient of 0.928 and 20 most important requests out of 71extracted by TOPSIS method. In 3rd stage, a third questionnaire was developed through interview with managers of 3 sup erior leagues and took measures to examine most implorations actions for providing stakeholders requests that 49 executive actions was recognized and performed by QFD model and quality house model indicated relation among requests of stakeholders, actions, weighting and ranked ultimately 24 important actions was recognized and by using results and normalization, performance assessment model extracted from above three processes that indicated victory result and monetary benefits included their most important requests and teams shall take action to establish clear financial and planning unit and shall be assessed periodically.

  13. Superior electrode performance of mesoporous hollow TiO2 microspheres through efficient hierarchical nanostructures

    Science.gov (United States)

    Zhang, Feng; Zhang, Yu; Song, Shuyan; Zhang, Hongjie

    2011-10-01

    Mesoporous hollow TiO2 microspheres with controlled size and hierarchical nanostructures are designed from a process employing in suit template-assisted and hydrothermal methods. The results show that the hollow microspheres composed of mesoporous nanospheres possess very stable reversible capacity of 184 mAh g-1 at 0.25C and exhibit extremely high power of 122 mAh g-1 at the high rate of 10C. The superior high-rate and high-capacity performance of the sample is attributed to the efficient hierarchical nanostructures. The hollow structure could shorten the diffusion length for lithium ion in the microspheres. The large mesoporous channels between the mesoporous nanospheres provide an easily-accessed system which facilitates electrolyte transportation and lithium ion diffusion within the electrode materials. The electrolyte, flooding the mesoporous channels, can also lead to a high electrolyte/electrode contact area, facilitating transport of lithium ions across the electrolyte/electrode interface. The small mesopores in the meosporous nanospheres can make the electrolyte and lithium ion further diffuse into the interior of electrode materials and increase electrolyte/electrode contact area. The small nanoparticles can also ensure high reversible capacity.

  14. Description and performance studies of the Forward Tracking for a scintilating fibre detector at LHCb

    CERN Document Server

    Amhis, Y; De Cian, M; Nikodem, T

    2014-01-01

    The $Forward$ $Tracking$ algorithm extends tracks reconstructed in the Vertex Locator to the three stations of the $Scintillating$ $Fibre$ $Tracker$. A Hough Cluster like algorithm is used to identify consistent fibre tracker hits. These hits are then combined with the input VELO tracks to so called long tracks, which is the main track type of physics analyses in LHCb. The algorithm consists of several steps which are described in detail. Its performance is studied on simulated $B^0_s \\to \\phi\\phi$ samples for the running conditions expected in future data taking after the upgrade, namely a luminosity larger $\\mathcal{L} = 2 \\times 10^{33} cm^{-2}s^{1}$.

  15. The Effect of Intermittent Signal on the Performance of Code Tracking Loop in GNSS Receivers

    Directory of Open Access Journals (Sweden)

    Chung-Liang Chang

    2011-01-01

    Full Text Available This paper analyzes the code tracking performance in the presence of signal blanking in Global Navigation Satellite System (GNSS. The blanking effect is usually caused by buildings that obscure the signal in either a periodic or random manner. In some cases, ideal blanking is used to remove random or periodic interference. Nevertheless, the effect of temporary discontinuity of signal often leads to the tracking and position error. To analyze this problem, three types of blanking model are considered: no blanking, periodic blanking, and random blanking of the signals input into the code tracking loop. The mean time to lose lock (MTLL is to assess the performance of code tracking system under signal blanking. Finally, the effect of steady-state tracking errors on the performance of tracking loop resulting from blanking environment is also discussed.

  16. LHCb Run II tracking performance and prospects for the Upgrade

    CERN Multimedia

    2016-01-01

    The LHCb tracking system consists of a Vertex Locator around the interaction point, a tracking station with four layers of silicon strip detectors in front of the magnet, and three tracking stations, using either straw-tubes or silicon strip detectors, behind the magnet. This system allows to reconstruct charged particles with a high efficiency (typically > 95% for particles with momentum > 5 GeV) and an excellent momentum resolution (0.5% for particles with momentum < 20 GeV). The high momentum resolution results in very narrow mass peaks, leading to a very good signal-to-background ratio in such key channels as $B_s\\to\\mu^+\\mu^-$. Furthermore an optimal decay time resolution is an essential element in the studies of time dependent CP violation. For Run II a novel reconstruction strategy was adopted, allowing to run the same track reconstruction in the software trigger as offline. This convergence was possible due to a staged approach in the track reconstruction and a large reduction in the processing tim...

  17. The Timepix Telescope for High Performance Particle Tracking

    CERN Document Server

    Akiba, Kazuyoshi; van Beuzekom, Martin; van Beveren, Vincent; Borghi, Silvia; Boterenbrood, Henk; Buytaert, Jan; Collins, Paula; Dosil Suárez, Alvaro; Dumps, Raphael; Eklund, Lars; Esperante, Daniel; Gallas, Abraham; Gordon, Hamish; van der Heijden, Bas; Hombach, Christoph; Hynds, Daniel; John, Malcolm; Leflat, Alexander; Li, Yi Ming; Longstaff, Ian; Morton, Alexander; Nakatsuka, Noritsugu; Nomerotski, Andre; Parkes, Chris; Perez Trigo, Eliseo; Plackett, Richard; Reid, Matthew M; Rodriguez Perez, Pablo; Schindler, Heinrich; Szumlak, Tomasz; Tsopelas, Panagiotis; Vázquez Sierra, Carlos; Velthuis, Jaap; Wysokinski, Michal

    2013-01-01

    The Timepix particle tracking telescope has been developed as part of the LHCb VELO Upgrade project, supported by the Medipix Collaboration and the AIDA framework. It is a primary piece of infrastructure for the VELO Upgrade project and is being used for the development of new sensors and front end technologies for several upcoming LHC trackers and vertexing systems. The telescope is designed around the dual capability of the Timepix ASICs to provide information about either the deposited charge or the timing information from tracks traversing the 14 x 14mm matrix of 55 x 55 um pixels. The rate of reconstructed tracks available is optimised by taking advantage of the shutter driven readout architecture of the Timepix chip, operated with existing readout systems. Results of tests conducted in the SPS North Area beam facility at CERN show that the telescope typically provides reconstructed track rates during the beam spills of between 3.5 and 7.5 kHz, depending on beam conditions. The tracks are time stamped wi...

  18. Superior mechanical performance of highly porous, anisotropic nanocellulose-montmorillonite aerogels prepared by freeze casting.

    Science.gov (United States)

    Donius, Amalie E; Liu, Andong; Berglund, Lars A; Wegst, Ulrike G K

    2014-09-01

    Directionally solidified nanofibrillated cellulose (NFC)-sodium-montmorillonite (MMT) composite aerogels with a honeycomb-like pore structure were compared with non-directionally frozen aerogels with equiaxed pore structure and identical composition and found to have superior functionalities. To explore structure-property correlations, three different aerogel compositions of 3wt% MMT, and 0.4wt%, 0.8wt%, and 1.2wt% NFC, respectively, were tested. Young׳s modulus, compressive strength and toughness were found to increase with increasing NFC content for both architectures. The modulus increased from 25.8kPa to 386kPa for the isotropic and from 2.13MPa to 3.86MPa for the anisotropic aerogels, the compressive yield strength increased from 3.3kPa to 18.0kPa for the isotropic and from 32.3kPa to 52.5kPa for the anisotropic aerogels, and the toughness increased from 6.3kJ/m(3) to 24.1kJ/m(3) for the isotropic and from 22.9kJ/m(3) to 46.2kJ/m(3) for the anisotropic aerogels. The great range of properties, which can be achieved through compositional as well as architectural variations, makes these aerogels highly attractive for a large range of applications, for which either a specific composition, or a particular pore morphology, or both are required. Finally, because NFC is flammable, gasification experiments were performed, which revealed that the inclusion of MMT increased the heat endurance and shape retention functions of the aerogels dramatically up to 800°C while the mechanical properties were retained up to 300°C.

  19. Tracking performance of the ATLAS inner detector and observation of known hadrons

    NARCIS (Netherlands)

    Kayl, M.; Trischuk, W.

    2010-01-01

    The inner detector is the central tracking device of the ATLAS detector. In these proceedings the tracking performance of the inner detector is presented on collision data recorded at $\\sqrt{s}$ = 900 GeV and 7 TeV. The identification of resonances like $\\Xi$ and $\\Omega$ baryons in cascade decays v

  20. Attitude and position tracking

    CSIR Research Space (South Africa)

    Candy, LP

    2011-01-01

    Full Text Available velocity data separately in a suitable frame. In this chapter we make the case for using bivectors as the attitude tracking method of choice since several features make their performance and flexibility superior to that of DCMs, Euler angles or even rotors...

  1. Neural net robot controller with guaranteed tracking performance.

    Science.gov (United States)

    Lewis, F L; Liu, K; Yesildirek, A

    1995-01-01

    A neural net (NN) controller for a general serial-link robot arm is developed. The NN has two layers so that linearity in the parameters holds, but the "net functional reconstruction error" and robot disturbance input are taken as nonzero. The structure of the NN controller is derived using a filtered error/passivity approach, leading to new NN passivity properties. Online weight tuning algorithms including a correction term to backpropagation, plus an added robustifying signal, guarantee tracking as well as bounded NN weights. The NN controller structure has an outer tracking loop so that the NN weights are conveniently initialized at zero, with learning occurring online in real-time. It is shown that standard backpropagation, when used for real-time closed-loop control, can yield unbounded NN weights if (1) the net cannot exactly reconstruct a certain required control function or (2) there are bounded unknown disturbances in the robot dynamics. The role of persistency of excitation is explored.

  2. Design and Performance Evaluation of a Dual Antenna Joint Carrier Tracking Loop

    Directory of Open Access Journals (Sweden)

    Wenfei Guo

    2015-10-01

    Full Text Available In order to track the carrier phases of Global Navigation Satellite Systems (GNSS signals in signal degraded environments, a dual antenna joint carrier tracking loop is proposed and evaluated. This proposed tracking loop processes inputs from two antennas, namely the master antenna and the slave antenna. The master antenna captures signals in open-sky environments, while the slave antenna capture signals in degraded environments. In this architecture, a Phase Lock Loop (PLL is adopted as a master loop to track the carrier phase of the open-sky signals. The Doppler frequency estimated by this master loop is utilized to assist weak carrier tracking in the slave loop. As both antennas experience similar signal dynamics due to satellite motion and clock frequency variations, a much narrower loop bandwidth and possibly a longer coherent integration can be adopted to track the weak signals in slave channels, by utilizing the Doppler aid from master channels. PLL tracking performance is affected by the satellite/user dynamics, clock instability, and thermal noise. In this paper, their impacts on the proposed phase tracking loop are analyzed and verified by both simulation and field data. Theoretical analysis and experimental results show that the proposed loop structure can track degraded signals (i.e., 18 dB-Hz with a very narrow loop bandwidth (i.e., 0.5 Hz and a TCXO clock.

  3. Design and Performance Evaluation of a Dual Antenna Joint Carrier Tracking Loop.

    Science.gov (United States)

    Guo, Wenfei; Lin, Tao; Niu, Xiaoji; Shi, Chuang; Zhang, Hongping

    2015-10-01

    In order to track the carrier phases of Global Navigation Satellite Systems (GNSS) signals in signal degraded environments, a dual antenna joint carrier tracking loop is proposed and evaluated. This proposed tracking loop processes inputs from two antennas, namely the master antenna and the slave antenna. The master antenna captures signals in open-sky environments, while the slave antenna capture signals in degraded environments. In this architecture, a Phase Lock Loop (PLL) is adopted as a master loop to track the carrier phase of the open-sky signals. The Doppler frequency estimated by this master loop is utilized to assist weak carrier tracking in the slave loop. As both antennas experience similar signal dynamics due to satellite motion and clock frequency variations, a much narrower loop bandwidth and possibly a longer coherent integration can be adopted to track the weak signals in slave channels, by utilizing the Doppler aid from master channels. PLL tracking performance is affected by the satellite/user dynamics, clock instability, and thermal noise. In this paper, their impacts on the proposed phase tracking loop are analyzed and verified by both simulation and field data. Theoretical analysis and experimental results show that the proposed loop structure can track degraded signals (i.e., 18 dB-Hz) with a very narrow loop bandwidth (i.e., 0.5 Hz) and a TCXO clock.

  4. Tracking Systems for Virtual Rehabilitation: Objective Performance vs. Subjective Experience. A Practical Scenario

    Science.gov (United States)

    Lloréns, Roberto; Noé, Enrique; Naranjo, Valery; Borrego, Adrián; Latorre, Jorge; Alcañiz, Mariano

    2015-01-01

    Motion tracking systems are commonly used in virtual reality-based interventions to detect movements in the real world and transfer them to the virtual environment. There are different tracking solutions based on different physical principles, which mainly define their performance parameters. However, special requirements have to be considered for rehabilitation purposes. This paper studies and compares the accuracy and jitter of three tracking solutions (optical, electromagnetic, and skeleton tracking) in a practical scenario and analyzes the subjective perceptions of 19 healthy subjects, 22 stroke survivors, and 14 physical therapists. The optical tracking system provided the best accuracy (1.074 ± 0.417 cm) while the electromagnetic device provided the most inaccurate results (11.027 ± 2.364 cm). However, this tracking solution provided the best jitter values (0.324 ± 0.093 cm), in contrast to the skeleton tracking, which had the worst results (1.522 ± 0.858 cm). Healthy individuals and professionals preferred the skeleton tracking solution rather than the optical and electromagnetic solution (in that order). Individuals with stroke chose the optical solution over the other options. Our results show that subjective perceptions and preferences are far from being constant among different populations, thus suggesting that these considerations, together with the performance parameters, should be also taken into account when designing a rehabilitation system. PMID:25808765

  5. Tracking Systems for Virtual Rehabilitation: Objective Performance vs. Subjective Experience. A Practical Scenario

    Directory of Open Access Journals (Sweden)

    Roberto Lloréns

    2015-03-01

    Full Text Available Motion tracking systems are commonly used in virtual reality-based interventions to detect movements in the real world and transfer them to the virtual environment. There are different tracking solutions based on different physical principles, which mainly define their performance parameters. However, special requirements have to be considered for rehabilitation purposes. This paper studies and compares the accuracy and jitter of three tracking solutions (optical, electromagnetic, and skeleton tracking in a practical scenario and analyzes the subjective perceptions of 19 healthy subjects, 22 stroke survivors, and 14 physical therapists. The optical tracking system provided the best accuracy (1.074 ± 0.417 cm while the electromagnetic device provided the most inaccurate results (11.027 ± 2.364 cm. However, this tracking solution provided the best jitter values (0.324 ± 0.093 cm, in contrast to the skeleton tracking, which had the worst results (1.522 ± 0.858 cm. Healthy individuals and professionals preferred the skeleton tracking solution rather than the optical and electromagnetic solution (in that order. Individuals with stroke chose the optical solution over the other options. Our results show that subjective perceptions and preferences are far from being constant among different populations, thus suggesting that these considerations, together with the performance parameters, should be also taken into account when designing a rehabilitation system.

  6. The impact of strategic planning process variation on superior organizational performance in nonprofit human service organizations providing mental health services

    Science.gov (United States)

    Singh, Karun Krishna

    This research investigated the question: What is the impact of strategic planning process variation on superior organizational performance in nonprofit human service organizations providing mental health services? The study employed a retrospective, cross-sectional, comparison group design using a combination of survey data, unobtrusive agency backup data, and follow-up in-person interview data. The sample was comprised of two main groups of organizations, those that were doing strategic planning and those that were not engaged in strategic planning. Responses were obtained from the chief executive officers of 306 of the 380 randomly selected organizations resulting in a response rate of 81%. Hypotheses were tested using multiple and logistic regression procedures. The major finding of this study was that complete strategic planning is highly correlated with superior organizational performance. The implications of the findings for administration, policy, research, and the social work profession are discussed.

  7. The impact of parental pressure on the performance of high school track athletes

    OpenAIRE

    2012-01-01

    M.A. This study was conducted to ascertain whether there is a significant relationship between, parental pressure, stress levels and athletic performance in high school track and field athletes. The question can be asked whether parental pressure will result in increased stress levels in the athlete and therefore poorer performance? Sixty-six high school track and field athletes, between the ages of 13 and 18 years, were selected for the study. The athletes were taken from training groups ...

  8. Performance of silicon pixel detectors at small track incidence angles for the ATLAS Inner Tracker upgrade

    Science.gov (United States)

    Viel, Simon; Banerjee, Swagato; Brandt, Gerhard; Carney, Rebecca; Garcia-Sciveres, Maurice; Hard, Andrew Straiton; Kaplan, Laser Seymour; Kashif, Lashkar; Pranko, Aliaksandr; Rieger, Julia; Wolf, Julian; Wu, Sau Lan; Yang, Hongtao

    2016-09-01

    In order to enable the ATLAS experiment to successfully track charged particles produced in high-energy collisions at the High-Luminosity Large Hadron Collider, the current ATLAS Inner Detector will be replaced by the Inner Tracker (ITk), entirely composed of silicon pixel and strip detectors. An extension of the tracking coverage of the ITk to very forward pseudorapidity values is proposed, using pixel modules placed in a long cylindrical layer around the beam pipe. The measurement of long pixel clusters, detected when charged particles cross the silicon sensor at small incidence angles, has potential to significantly improve the tracking efficiency, fake track rejection, and resolution of the ITk in the very forward region. The performance of state-of-the-art pixel modules at small track incidence angles is studied using test beam data collected at SLAC and CERN.

  9. Performance of Silicon Pixel Detectors at Small Track Incidence Angles for the ATLAS Inner Tracker Upgrade

    CERN Document Server

    Viel, Simon; The ATLAS collaboration; Brandt, Gerhard; Carney, Rebecca; Garcia-Sciveres, Maurice; Hard, Andrew; Kaplan, Laser Seymour; Kashif, Lashkar; Pranko, Aliaksandr; Rieger, Julia; Wolf, Julian Choate; Wu, Sau Lan; Yang, Hongtao

    2015-01-01

    In order to enable the ATLAS experiment to successfully track charged particles produced in high-energy collisions at the High-Luminosity Large Hadron Collider, the current ATLAS Inner Detector will be replaced by the Inner Tracker (ITk), entirely composed of silicon pixel and strip detectors. An extension of the tracking coverage of the ITk to very forward pseudorapidity values is proposed, using pixel modules placed in a long cylindrical layer around the beam pipe. The measurement of long pixel clusters, detected when charged particles cross the silicon sensor at small incidence angles, has potential to significantly improve the tracking efficiency, fake track rejection, and resolution of the ITk in the very forward region. The performance of state-of-the-art pixel modules at small track incidence angles is studied using test beam data collected at SLAC and CERN.

  10. TrackEngage: Tracking Student Engagment in Learning Resources and its Correlation to their Performance

    OpenAIRE

    Barry-Ryan, Catherine

    2015-01-01

    An important factor in the academic performance of Laboratory based science students is attendance on the basis that practical experience and engagement in teaching activities are necessary to develop skills and competencies. Student attendance also has wider implications for science schools as they are increasingly challenged in providing laboratory based practical teaching in the face of increasing student numbers. The relationship between attendance and academic performance has been studie...

  11. Clutter in electronic medical records: examining its performance and attentional costs using eye tracking.

    Science.gov (United States)

    Moacdieh, Nadine; Sarter, Nadine

    2015-06-01

    The objective was to use eye tracking to trace the underlying changes in attention allocation associated with the performance effects of clutter, stress, and task difficulty in visual search and noticing tasks. Clutter can degrade performance in complex domains, yet more needs to be known about the associated changes in attention allocation, particularly in the presence of stress and for different tasks. Frequently used and relatively simple eye tracking metrics do not effectively capture the various effects of clutter, which is critical for comprehensively analyzing clutter and developing targeted, real-time countermeasures. Electronic medical records (EMRs) were chosen as the application domain for this research. Clutter, stress, and task difficulty were manipulated, and physicians' performance on search and noticing tasks was recorded. Several eye tracking metrics were used to trace attention allocation throughout those tasks, and subjective data were gathered via a debriefing questionnaire. Clutter degraded performance in terms of response time and noticing accuracy. These decrements were largely accentuated by high stress and task difficulty. Eye tracking revealed the underlying attentional mechanisms, and several display-independent metrics were shown to be significant indicators of the effects of clutter. Eye tracking provides a promising means to understand in detail (offline) and prevent (in real time) major performance breakdowns due to clutter. Display designers need to be aware of the risks of clutter in EMRs and other complex displays and can use the identified eye tracking metrics to evaluate and/or adjust their display. © 2015, Human Factors and Ergonomics Society.

  12. Performance-Based Adaptive Fuzzy Tracking Control for Networked Industrial Processes.

    Science.gov (United States)

    Wang, Tong; Qiu, Jianbin; Yin, Shen; Gao, Huijun; Fan, Jialu; Chai, Tianyou

    2016-08-01

    In this paper, the performance-based control design problem for double-layer networked industrial processes is investigated. At the device layer, the prescribed performance functions are first given to describe the output tracking performance, and then by using backstepping technique, new adaptive fuzzy controllers are designed to guarantee the tracking performance under the effects of input dead-zone and the constraint of prescribed tracking performance functions. At operation layer, by considering the stochastic disturbance, actual index value, target index value, and index prediction simultaneously, an adaptive inverse optimal controller in discrete-time form is designed to optimize the overall performance and stabilize the overall nonlinear system. Finally, a simulation example of continuous stirred tank reactor system is presented to show the effectiveness of the proposed control method.

  13. Evaluation of covariance and information performance measures for dynamic object tracking

    Science.gov (United States)

    Yang, Chun; Blasch, Erik; Douville, Phil; Kaplan, Lance; Qiu, Di

    2010-04-01

    In surveillance and reconnaissance applications, dynamic objects are dynamically followed by track filters with sequential measurements. There are two popular implementations of tracking filters: one is the covariance or Kalman filter and the other is the information filter. Evaluation of tracking filters is important in performance optimization not only for tracking filter design but also for resource management. Typically, the information matrix is the inverse of the covariance matrix. The covariance filter-based approaches attempt to minimize the covariance matrix-based scalar indexes whereas the information filter-based methods aim at maximizing the information matrix-based scalar indexes. Such scalar performance measures include the trace, determinant, norms (1-norm, 2-norm, infinite-norm, and Forbenius norm), and eigenstructure of the covariance matrix or the information matrix and their variants. One natural question to ask is if the scalar track filter performance measures applied to the covariance matrix are equivalent to those applied to the information matrix? In this paper we show most of the scalar performance indexes are equivalent yet some are not. As a result, the indexes if used improperly would provide an "optimized" solution but in the wrong sense relative to track accuracy. The simulation indicated that all the seven indexes were successful when applied to the covariance matrix. However, the failed indexes for the information filter include the trace and the four norms (as defined in MATLAB) of the information matrix. Nevertheless, the determinant and the properly selected eigenvalue of the information matrix were successful to select the optimal sensor update configuration. The evaluation analysis of track measures can serve as a guideline to determine the suitability of performance measures for tracking filter design and resource management.

  14. Development and performance of track reconstruction algorithms at the energy frontier with the ATLAS detector

    CERN Document Server

    Gagnon, Louis-Guillaume; The ATLAS collaboration

    2017-01-01

    ATLAS track reconstruction software is continuously evolving to match the demands from the increasing instantaneous luminosity of the LHC, as well as the increased center-of-mass energy. These conditions result in a higher abundance of events with dense track environments, such the core of jets or boosted tau leptons undergoing three-prong decays. These environments are characterised by charged particle separations on the order of the ATLAS inner detector sensor dimensions and are created by the decay of boosted objects. Significant upgrades were made to the track reconstruction software to cope with the expected conditions during LHC Run~2. In particular, new algorithms targeting dense environments were developed. These changes lead to a substantial reduction of reconstruction time while at the same time improving physics performance. The employed methods are presented and physics performance studies are shown, including a measurement of the fraction of lost tracks in jets with high transverse momentum.

  15. Performance of the ATLAS track and vertex reconstruction 
in the LHC Run 2

    CERN Document Server

    Oide, Hideyuki; The ATLAS collaboration

    2016-01-01

    Run-2 of the LHC has provided new challenges to track and vertex reconstruction with higher centre-of-mass energies and luminosity leading to increasingly high-multiplicity environments and boosted, highly-collimated physics objects. The Insertable B-layer (IBL) is a fourth pixel layer, which was inserted in the innermost region of ATLAS during the long shutdown of the LHC. We will present results showing the performance of the track and vertex reconstruction algorithms using Run-2 data at the LHC and discuss some of the challenges encountered during commissioning. Recent improvements include a factor of three reduction in the reconstruction time, optimisation for the expected conditions, novel techniques to enhance the performance in dense jet cores and time-dependent alignment of sub-detectors. Moreover, data-driven methods to evaluate vertex resolution, fake rates, track reconstruction inefficiencies in dense environments, and track parameter resolution and biases will be shown.

  16. Design and Performance Evaluation on Ultra-Wideband Time-Of-Arrival 3D Tracking System

    Science.gov (United States)

    Ni, Jianjun; Arndt, Dickey; Ngo, Phong; Dusl, John

    2012-01-01

    A three-dimensional (3D) Ultra-Wideband (UWB) Time--of-Arrival (TOA) tracking system has been studied at NASA Johnson Space Center (JSC) to provide the tracking capability inside the International Space Station (ISS) modules for various applications. One of applications is to locate and report the location where crew experienced possible high level of carbon-dioxide and felt upset. In order to accurately locate those places in a multipath intensive environment like ISS modules, it requires a robust real-time location system (RTLS) which can provide the required accuracy and update rate. A 3D UWB TOA tracking system with two-way ranging has been proposed and studied. The designed system will be tested in the Wireless Habitat Testbed which simulates the ISS module environment. In this presentation, we discuss the 3D TOA tracking algorithm and the performance evaluation based on different tracking baseline configurations. The simulation results show that two configurations of the tracking baseline are feasible. With 100 picoseconds standard deviation (STD) of TOA estimates, the average tracking error 0.2392 feet (about 7 centimeters) can be achieved for configuration Twisted Rectangle while the average tracking error 0.9183 feet (about 28 centimeters) can be achieved for configuration Slightly-Twisted Top Rectangle . The tracking accuracy can be further improved with the improvement of the STD of TOA estimates. With 10 picoseconds STD of TOA estimates, the average tracking error 0.0239 feet (less than 1 centimeter) can be achieved for configuration "Twisted Rectangle".

  17. Origin of the superior performance of (thio)squaramides over (thio)ureas in organocatalysis.

    Science.gov (United States)

    Lu, Tongxiang; Wheeler, Steven E

    2013-11-04

    The Diels-Alder cycloaddition of anthracene and nitrostyrene catalyzed by the squaramide-derived aminocatalysts (Sq) recently reported by Jørgensen and co-workers (Angew. Chem. 2012, 124, 10417; Angew. Chem. Int. Ed. 2012, 51, 10271) has been studied by using modern tools of computational quantum chemistry. This catalyst is compared with analogous urea-, thiourea-, and thiosquaramide-derived aminocatalysts. Ultimately, a thiosquar-amide-derived catalyst is predicted to result in the lowest free-energy barrier, while retaining the same high degree of enantioselectivity as Sq. This stems in part from the superior hydrogen-bonding ability of thiosquaramides, compared to squaramides and (thio)ureas. We also examine the hydrogen-bonding ability of (thio)ureas and (thio)-squaramides in model complexes. In contrast to previous work, we show that aromaticity does not contribute significantly to the enhanced hydrogen-bonding interactions of squaramides. Overall, thiosquaramide, which has not been explored in the context of either organocatalysis or molecular recognition, is predicted to lead to strong, co-planar hydrogen bonds, and should serve as a potent hydrogen-bonding element in a myriad of applications.

  18. Superior supercapacitive performance of hollow activated carbon nanomesh with hierarchical structure derived from poplar catkins

    Science.gov (United States)

    Su, Xiao-Li; Cheng, Ming-Yu; Fu, Lin; Yang, Jing-He; Zheng, Xiu-Cheng; Guan, Xin-Xin

    2017-09-01

    The hollow activated carbon nanomesh (PCACM) with a hierarchical porous structure is derived from biowaste-poplar catkins by in-situ calcination etching with Ni(NO3)2·6H2O and KOH in N2 flow combined with an acid dissolution technique. This procedure not only inherits the natural tube morphology of poplar catkins, but also generates a fascinating nanomesh structure on the walls. PCACM possesses a large specific surface area (SBET = 1893.0 m2 g-1) and high total pore volume (Vp = 1.495 cm3 g-1), and displays an exciting meso-macoporous structure with a concentrated pore size distribution of 4.53 nm. The specific capacitance of PCACM is as high as 314.6 F g-1 at 1.0 A g-1 when used as the electrode materials for supercapacitor. Furthermore, the symmetric supercapacitor of PCACM with 1.0 M Na2SO4 solution as the electrolyte displays a high energy density of 20.86 Wh kg-1 at a power density of 180.13 W kg-1 within a wide voltage rage of 0-1.8 V, which is comparable or even obviously higher than those of other biomass derived carbon reported. It is noteworthy that PCACM also exhibits superior cycling stability and coulombic efficiency. The excellent electrochemical behaviors enable PCACM to be a promising electrode material for supercapacitors.

  19. Active vacuum brazing of CNT films to metal substrates for superior electron field emission performance

    Science.gov (United States)

    Longtin, Rémi; Sanchez-Valencia, Juan Ramon; Shorubalko, Ivan; Furrer, Roman; Hack, Erwin; Elsener, Hansrudolf; Gröning, Oliver; Greenwood, Paul; Rupesinghe, Nalin; Teo, Kenneth; Leinenbach, Christian; Gröning, Pierangelo

    2015-02-01

    The joining of macroscopic films of vertically aligned multiwalled carbon nanotubes (CNTs) to titanium substrates is demonstrated by active vacuum brazing at 820 °C with a Ag-Cu-Ti alloy and at 880 °C with a Cu-Sn-Ti-Zr alloy. The brazing methodology was elaborated in order to enable the production of highly electrically and thermally conductive CNT/metal substrate contacts. The interfacial electrical resistances of the joints were measured to be as low as 0.35 Ω. The improved interfacial transport properties in the brazed films lead to superior electron field-emission properties when compared to the as-grown films. An emission current of 150 μA was drawn from the brazed nanotubes at an applied electric field of 0.6 V μm-1. The improvement in electron field-emission is mainly attributed to the reduction of the contact resistance between the nanotubes and the substrate. The joints have high re-melting temperatures up to the solidus temperatures of the alloys; far greater than what is achievable with standard solders, thus expanding the application potential of CNT films to high-current and high-power applications where substantial frictional or resistive heating is expected.

  20. Graphite assisted synthesis of nanoparticles interconnected porous two-dimensional LiMn2O4 nanoplates with superior performance

    Science.gov (United States)

    Tan, X. H.; Liu, H. Q.; Jiang, Y.; Liu, G. Y.; Guo, Y. J.; Wang, H. F.; Sun, L. F.; Chu, W. G.

    2016-10-01

    A facile graphite assisted approach is proposed to synthesize high performance LiMn2O4 nanostructures. Graphite plates with different sizes and thicknesses are found to have different influences on the structure, morphology and performance of LiMn2O4. Larger and thicker graphite plates result in 2-D porous LiMn2O4 nanoplates whereas smaller and thinner ones lead to the formation of dispersed nanoparticles. Despite the smaller lattice constant, the shorter Lisbnd O and longer Mnsbnd O bonds, and the lower BET surface area compared to dispersed LiMn2O4 nanoparticles, LiMn2O4 nanoplates formed by primary nanoparticles with similar sizes and morphologies exhibit the superior performance because of the better interparticle electronic conductivity. LiMn2O4 nanoplates show the discharge capacity of 104 mAh g-1 at 50 C and the capacity retention of 70.0% after 1000 cycles for 1 C at RT, better than the corresponding values, 95 mAh g-1 and 64.5% for dispersed LiMn2O4 nanoparticles, respectively. The more superior performance of LiMn2O4 nanoplates compared to dispersed LiMn2O4 nanoparticles is particularly manifested in the case of lower percentage conductive additive, which is very significant for practical application. This simple, cost effective, green and up scalable approach can also be employed to synthesize other 2-D nanostructured materials.

  1. A novel method for quantification of beam's-eye-view tumor tracking performance.

    Science.gov (United States)

    Hu, Yue-Houng; Myronakis, Marios; Rottmann, Joerg; Wang, Adam; Morf, Daniel; Shedlock, Daniel; Baturin, Paul; Star-Lack, Josh; Berbeco, Ross

    2017-09-09

    In-treatment imaging using an electronic portal imaging device (EPID) can be used to confirm patient and tumor positioning. Real-time tumor tracking performance using current digital megavolt (MV) imagers is hindered by poor image quality. Novel EPID designs may help to improve quantum noise response, while also preserving the high spatial resolution of the current clinical detector. Recently investigated EPID design improvements include but are not limited to multi-layer imager (MLI) architecture, thick crystalline and amorphous scintillators, and phosphor pixilation and focusing. The goal of the present study was to provide a method of quantifying improvement in tracking performance as well as to reveal the physical underpinnings of detector design that impact tracking quality. The study employs a generalizable ideal observer methodology for the quantification of tumor tracking performance. The analysis is applied to study both the effect of increasing scintillator thickness on a standard, single-layer imager (SLI) design as well as the effect of MLI architecture on tracking performance. The present study uses the ideal observer signal-to-noise ratio (d') as a surrogate for tracking performance. We employ functions which model clinically relevant tasks and generalized frequency-domain imaging metrics to connect image quality with tumor tracking. A detection task for relevant Cartesian shapes (i.e. spheres and cylinders) was used to quantify trackability of cases employing fiducial markers. Automated lung tumor tracking algorithms often leverage the differences in benign and malignant lung tissue textures. These types of algorithms (e.g. soft tissue localization - STiL) were simulated by designing a discrimination task, which quantifies the differentiation of tissue textures, measured experimentally and fit as a power-law in trend (with exponent β) using a cohort of MV images of patient lungs. The modeled MTF and NPS were used to investigate the effect of

  2. Tracking and vertexing performance of the ATLAS Inner Detector at the LHC

    CERN Document Server

    Marti, S; The ATLAS collaboration

    2011-01-01

    The ATLAS experiment at the LHC is equipped with a charged particle tracking system, the Inner Detector, built on three subdetectors, which provide high precision measurements made from a fine detector granularity. The Pixel and microstrip (SCT) subdetectors, which use the silicon technology, are complemented with the Transition Radiation Tracker. Since the LHC startup in 2009, the ATLAS inner tracker has played a central role in many ATLAS physics analyses. Rapid improvements in the calibration and alignment of the detector allowed it to reach nearly the nominal performance in the timespan of a few months. The tracking performance proved to be stable as the LHC luminosity increased by five orders of magnitude during the 2010 proton run, while the performance was only slightly degraded in the extremely dense heavy ion collisions. New developments in the offline reconstruction for the 2011 run will improve the tracking performance in high pile-up conditions.

  3. The Best Achievable ℋ2 Tracking Performances for SIMO Feedback Control Systems

    Directory of Open Access Journals (Sweden)

    Shinji Hara

    2007-01-01

    Full Text Available This paper is concerned with the inherent ℋ2 tracking performance limitation of single-input and multiple-output (SIMO linear time-invariant (LTI feedback control systems. The performance is measured by the tracking error between a step reference input and the plant output with additional penalty on control input. We employ the plant augmentation strategy, which enables us to derive analytical closed-form expressions of the best achievable performance not only for discrete-time system, but also for continuous-time system by exploiting the delta domain version of the expressions.

  4. Thermal Tracking of Sports Players

    Directory of Open Access Journals (Sweden)

    Rikke Gade

    2014-07-01

    Full Text Available We present here a real-time tracking algorithm for thermal video from a sports game. Robust detection of people includes routines for handling occlusions and noise before tracking each detected person with a Kalman filter. This online tracking algorithm is compared with a state-of-the-art offline multi-target tracking algorithm. Experiments are performed on a manually annotated 2-minutes video sequence of a real soccer game. The Kalman filter shows a very promising result on this rather challenging sequence with a tracking accuracy above 70% and is superior compared with the offline tracking approach. Furthermore, the combined detection and tracking algorithm runs in real time at 33 fps, even with large image sizes of 1920 × 480 pixels.

  5. Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance.

    Science.gov (United States)

    Ballner, Daniel; Herzele, Sabine; Keckes, Jozef; Edler, Matthias; Griesser, Thomas; Saake, Bodo; Liebner, Falk; Potthast, Antje; Paulik, Christian; Gindl-Altmutter, Wolfgang

    2016-06-01

    A facile approach to obtaining cellulose nanofiber-reinforced polystyrene with greatly improved mechanical performance compared to unreinforced polystyrene is presented. Cellulose nanofibers were obtained by mechanical fibrillation of partially delignified wood (MFLC) and compared to nanofibers obtained from bleached pulp. Residual hemicellulose and lignin imparted amphiphilic surface chemical character to MFLC, which enabled the stabilization of emulsions of styrene in water. Upon suspension polymerization of styrene from the emulsion, polystyrene microspheres coated in MFLC were obtained. When processed into polymer sheets by hot-pressing, improved bending strength and superior impact toughness was observed for the polystyrene-MFLC composite compared to the un-reinforced polystyrene.

  6. New Performance Metrics for Quantitative Polymerase Chain Reaction-Based Microbial Source Tracking Methods

    Science.gov (United States)

    Binary sensitivity and specificity metrics are not adequate to describe the performance of quantitative microbial source tracking methods because the estimates depend on the amount of material tested and limit of detection. We introduce a new framework to compare the performance ...

  7. LHCb : Performance of the LHCb tracking system in Run I of the LHC

    CERN Multimedia

    Davis, Adam

    2015-01-01

    The LHCb tracking system consists of a Vertex Locator around the interaction point, a tracking station with four layers of silicon strip detectors in front of the magnet, and three tracking stations, using either straw-tubes or silicon strip detectors, behind the magnet. This system allows to reconstruct charged particles with a high efficiency (typically > 95% for particles with momentum > 5 GeV) and an excellent momentum resolution (0.5% for particles with momentum mu mu. Furthermore an optimal decay time resolution is an essential element in the studies of time dependent CP violation. Thanks to the excellent performance of the tracking system, a decay time resolution of ~50 fs is obtained, allowing to resolve the fast B0s oscillation with a mixing frequency of 17.7 ps-1. In this talk, we will give an overview of the track reconstruction in LHCb and review its performance in Run I of the LHC. We will highlight the challenges and improvements of the track reconstruction for the data taking period from 2015 ...

  8. FLYSUB-Consortium Tracking and RICH Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Soha, Aria [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Azumoun, Bob [Brookhaven National Lab. (BNL), Upton, NY (United States); Blatnik, Marie [Brookhaven National Lab. (BNL), Upton, NY (United States); Pak, Robert [Brookhaven National Lab. (BNL), Upton, NY (United States); Purschke, Martin [Brookhaven National Lab. (BNL), Upton, NY (United States); Di Ruzza, Benedetto [Brookhaven National Lab. (BNL), Upton, NY (United States); Woody, Craig [Brookhaven National Lab. (BNL), Upton, NY (United States); Bhopatkar, Vallary [Florida Inst. of Technology, Melbourne, FL (United States); Hohlmann, Marcus [Florida Inst. of Technology, Melbourne, FL (United States); Twigger, Jessie [Florida Inst. of Technology, Melbourne, FL (United States); Zhang, Aiwu [Florida Inst. of Technology, Melbourne, FL (United States); Dehmelt, Klaus [Stony Brook Univ., NY (United States); Deshpande, Abhay [Stony Brook Univ., NY (United States); Feege, Nils [Stony Brook Univ., NY (United States); Hemmick, Thomas [Stony Brook Univ., NY (United States); Bai, Xinzhang [Univ. of Virginia, Charlottesville, VA (United States); Gnanvo, Kondo [Univ. of Virginia, Charlottesville, VA (United States); Gu, Chao [Univ. of Virginia, Charlottesville, VA (United States); Liyanage, Nilanga [Univ. of Virginia, Charlottesville, VA (United States); Majka, Richard [Yale Univ., New Haven, CT (United States); Smirnov, Nikolai [Yale Univ., New Haven, CT (United States)

    2013-09-23

    This is a technical scope of work (TSW) between the Fermi National Accelerator Laboratory (Fermilab) and the experiments of FLYSUB-Consortium who have committed to participate in beam tests to be carried out during the 2013-2014 Fermilab Test Beam Facility program. The ultimate goal of this test-beam effort is to test and verify the performance of the individual components according to their expectation.

  9. Standardization in Performance Assessment of Telemetry Tracking Systems

    Science.gov (United States)

    2013-09-01

    administration is continuing to evolve an integrated and global ballistic missile defense capability 4 (Hildreth & Woolf , 2010). Although the attention has...P. (2003). Performance evaluation of telemetry stations based on site selection. Defence Science Journal, 53, 233–238. Hildreth, S. A. & Woolf , A. F...51 INITIAL DISTRIBUTION LIST 1. Defense Technical Information Center Ft. Belvoir, Virginia 2. Dudley Knox Library Naval Postgraduate School Monterey, California

  10. Description and performance of track and primary-vertex reconstruction with the CMS tracker

    Science.gov (United States)

    The CMS Collaboration

    2014-10-01

    A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For tbar t events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of pT > 0.9GeV is 94% for pseudorapidities of |η| software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.

  11. Design and Performance of Sampled Data Loops for Subcarrier and Carrier Tracking

    Science.gov (United States)

    Aguirre, S.; Hurd, W. J.

    1984-01-01

    Design parameters and resulting performance are presented for the sampled data analogies of continuous time phase locked loops of second and third order containing perfect integrators. Expressions for noise equivalent bandwidth and steady state errors are given. Stability and gain margin are investigated using z plane root loci. Finally, an application is presented for Voyager subcarrier and carrier tracking under the dynamics of the encounters with Uranus and Neptune. For carrier tracking, loop bandwidth narrow enough for satisfactory loop signal to noise ratios can be achieved using third order loops without rate aiding, whereas second order loops would require aiding. For subcarrier tracking, third order loops can be used when the sampling rate is limited to approximately once per second, as in the Baseband Assembly, whereas second order loops sufficiently wide to track the dynamics have stability problems at that sampling rate.

  12. Toward a science of exceptional achievement: attaining superior performance through deliberate practice.

    Science.gov (United States)

    Ericsson, K Anders; Nandagopal, Kiruthiga; Roring, Roy W

    2009-08-01

    Exceptional performance is frequently attributed to genetic differences in talent. Since Sir Francis Galton's book, Hereditary Genius, many scientists have cited heritable factors that set limits of performance and only allow some individuals to attain exceptional levels. However, thus far these accounts have not explicated the causal processes involved in the activation and expression of unique genes in DNA that lead to the emergence of distinctive physiological attributes and cognitive capacities (innate talent). This article argues on the basis of our current knowledge that it is possible to account for the development of elite performance among healthy children without recourse to innate talent (genetic endowment)--excepting the innate determinants of body size. Our account is based on the expert-performance approach and proposes that the distinctive characteristics of exceptional performers are the result of adaptations to extended and intense practice activities that selectively activate dormant genes that are contained within all healthy individuals' DNA. Furthermore, the theoretical framework of expert performance explains the apparent emergence of early talent by identifying factors that influence starting ages for training and the accumulated engagement in sustained extended deliberate practice, such as motivation, parental support, and access to the best training environments and teachers. In sum, our empirical investigations and extensive reviews show that the development of expert performance will be primarily constrained by individuals' engagement in deliberate practice and the quality of the available training resources.

  13. Identifying Blood Biomarkers and Physiological Processes That Distinguish Humans with Superior Performance under Psychological Stress

    Science.gov (United States)

    2009-12-18

    Analysis of the factors contributing to serum retinol binding protein and transthyretin levels in Japanese adults. J Atheroscler Thromb 13: 209–215. 23...susceptible low perform- ing colleagues, we compared expression levels of low and median- scoring vs. high-scoring performers. This resulted in nine...effect of catecholamines (eg. epinephrine) either by increasing the release or preventing the reuptake of catecholamines at a pre-synaptic level [11,12

  14. Performance limitations in the tracking and regulation problem for discrete-time systems.

    Science.gov (United States)

    Jiang, Xiao-Wei; Guan, Zhi-Hong; Yuan, Fu-Shun; Zhang, Xian-He

    2014-03-01

    In this paper, the optimal tracking and regulation performance of discrete-time, multi-input multi-output, linear time-invariant systems is investigated. The control signal is influenced by the external disturbance, and the output feedback is subjected to an additive white Gaussian noise (AWGN) corruption. The tracking error with channel input power constraint and the output regulation with control energy constraint are adopted as the measure of tracking and regulation performance respectively, which can be obtained by searching through all stabilizing two-parameter controllers. Both results demonstrate that the performance is closely related to locations and directions of the nonminimum phase zeros, unstable poles of the plant and may be badly degraded by external disturbance and AWGN.

  15. Steering Dynamic Performance of an Electric Transmission Tracked Vehicle Based on Rotating Speed Control

    Institute of Scientific and Technical Information of China (English)

    SUN Feng-chun; CHEN Shu-yong; ZHANG Cheng-ning

    2006-01-01

    In order to analyze steering dynamic performance of an electric transmission tracked vehicle exactly, modern design theory and methodology-collaborative simulation and virtual prototype are applied. The 3-D multi-body dynamic model of full vehicle running gears and control system model are built based on the simulation platform on dynamic analysis software known as RecurDyn/Track-HM and control system analysis software known as Matlab/Simulink. Theory analysis and collaborative simulation of turning kinematic/dynamic performance in different velocity and turning radius are made. Comparing the test result with theory computation validates the correctness of the model. The method has instructional significance of solving the existent modeling problem, comprehension of turning performance and test debugging strategy,and also forms a new idea of research on dynamic characteristics for the electric transmission tracked vehicle's electric propulsion system.

  16. Recurrent fuzzy neural network backstepping control for the prescribed output tracking performance of nonlinear dynamic systems.

    Science.gov (United States)

    Han, Seong-Ik; Lee, Jang-Myung

    2014-01-01

    This paper proposes a backstepping control system that uses a tracking error constraint and recurrent fuzzy neural networks (RFNNs) to achieve a prescribed tracking performance for a strict-feedback nonlinear dynamic system. A new constraint variable was defined to generate the virtual control that forces the tracking error to fall within prescribed boundaries. An adaptive RFNN was also used to obtain the required improvement on the approximation performances in order to avoid calculating the explosive number of terms generated by the recursive steps of traditional backstepping control. The boundedness and convergence of the closed-loop system was confirmed based on the Lyapunov stability theory. The prescribed performance of the proposed control scheme was validated by using it to control the prescribed error of a nonlinear system and a robot manipulator.

  17. Individual Differences in Spatial Orientation Performances: An Eye Tracking Study

    Directory of Open Access Journals (Sweden)

    Sacide Güzin Mazman

    2013-08-01

    Full Text Available This paper includes two studies. In study 1, the computerized version of Spatial Orientation Test (Kozhevnikov & Hegarty, 2001 was standardized for determining the norm values for Turkish undergraduate students as well as demonstrating the reliability and validity of the test. In Study 1, 101 undergraduate students from two different departments were recruited and the data were collected with computerized spatial orientation test together with a demographic information form. Descriptive statistics, independent sample t test and one way ANOVA were used in data analysis. Statistical analyses revealed out that gender and years of computer experience have significant effect on spatial orientation ability scores. Test-retest reliability coefficient was found for total accuracy score as r= .778 and r=.634 for total reaction time. As a result of discriminant validity study, the correlation between the spatial orientation and mental rotation test scores was found to be very low and not significant. In study 2, individual differences between low and high spatial orientation ability groups during performing “Spatial Orientation Test” were examined through eye movements. Five high and five low spatial orientation ability level students were asked to participate in the second study. While performing Spatial Orientation Test, their eye movements were recorded. The findings indicated that there were significant differences in eye movements between different spatial orientation ability levels in terms of fixation duration. Furthermore it was found that high and low level spatial orientation level groups solved problems with different solution patterns.

  18. Antisaccade Performance in Schizophrenia: A Neural Model of Decision Making in the Superior Colliculus

    Directory of Open Access Journals (Sweden)

    Vassilis eCutsuridis

    2014-02-01

    Full Text Available Antisaccade performance deficits in schizophrenia are generally interpreted as an impaired top-down inhibitory signal failing to suppress the erroneous response. We recorded the antisaccade performance (error rates and latencies of healthy and schizophrenia subjects performing the mirror antisaccade task. A neural rise-to-threshold model of antisaccade performance was developed to uncover the biophysical mechanisms giving rise to the observed deficits in schizophrenia. Schizophrenia patients displayed greater variability in the antisaccade and corrected antisaccade latency distributions, increased error rates and decreased corrected errors, relative to healthy participants. Our model showed that i increased variability is due to a more noisy accumulation of information by schizophrenia patients, but their confidence level required before making a decision is unaffected, and ii competition between the correct and erroneous decision processes, and not a third top-down inhibitory signal of the erroneous response, accounts for the antisaccade performance of healthy and schizophrenia subjects. Local competition further ensured that a correct antisaccade is never followed by an error prosaccade.

  19. Tracking the evolution in corporate environmental performance in Danish industry

    DEFF Research Database (Denmark)

    Ulhøi, John Parm; Madsen, Henning

    2014-01-01

    Based on longitudinal data, collected over a period of 16 years, this paper addresses how management responds to stakeholders’ concerns about the natural environment by prioritizing their activities and thus improving the environmental performability of the firms. The paper specifically seeks...... to answer how stakeholders' perceived influence develops over time and whether those changes affect firms' environmental activities. Starting in 1995, and every fourth year following, we distributed a pre-tested structured questionnaire to a random sample of small and medium-sized industrial firms...... in Denmark. Before concluding, key implications for corporate managers and other affected decision-makers are addressed. Despite the continuing economic crisis, our findings indicate that environmental management initiatives have successfully moved up on industry’s strategic agenda to become an enduring...

  20. Measuring Human Performance in Simulated Nuclear Power Plant Control Rooms Using Eye Tracking

    Energy Technology Data Exchange (ETDEWEB)

    Kovesdi, Casey Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); LeBlanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-11-01

    Control room modernization will be an important part of life extension for the existing light water reactor fleet. As part of modernization efforts, personnel will need to gain a full understanding of how control room technologies affect performance of human operators. Recent advances in technology enables the use of eye tracking technology to continuously measure an operator’s eye movement, which correlates with a variety of human performance constructs such as situation awareness and workload. This report describes eye tracking metrics in the context of how they will be used in nuclear power plant control room simulator studies.

  1. Simulation and performance of an artificial retina for 40 MHz track reconstruction

    CERN Document Server

    Abba, A; Citterio, M; Caponio, F; Cusimano, A; Geraci, A; Marino, P; Morello, M J; Neri, N; Punzi, G.; Piucci, A; Ristori, L; Spinella, F; Stracka, S; Tonelli, D

    2015-01-01

    We present the results of a detailed simulation of the artificial retina pattern-recognition algorithm, designed to reconstruct events with hundreds of charged-particle tracks in pixel and silicon detectors at LHCb with LHC crossing frequency of 40MHz. The detailed geometry and charged-particle activity of a large tracking detector are simulated and used to assess the performance of the artificial retina algorithm. Excellent performances have been found for the retina pattern-recognition algorithm, comparable with the full LHCb reconstruction algorithm.

  2. Design and performance analysis of tracking controller for uncertain nonlinear composite system using neural networks

    Institute of Scientific and Technical Information of China (English)

    Endong LIU; Yuanwei JING; Siying ZHANG

    2005-01-01

    Based on high order dynamic neural network,this paper presents the tracking problem for uncertain nonlinear composite system,which contains external disturbance,whose nonlinearities are assumed to be unknown.A smooth controller is designed to guarantee a uniform ultimate boundedness property for the tracking error and all other signals in the closed loop.Certain measures are utilized to test its performance.No a priori knowledge of an upper bound on the "optimal" weight and modeling error is required;the weights of neural networks are updated on-line.Numerical simulations performed on a simple example illustrate and clarify the approach.

  3. High-performance hybrid pervaporation membranes with superior hydrothermal and acid stability

    NARCIS (Netherlands)

    H.L. Castricum; R. Kreiter; H.M. van Veen; D.H.A. Blank; J.F. Vente; J.E. ten Elshof

    2008-01-01

    A new organic-inorganic hybrid membrane has been prepared with exceptional performance in dewatering applications. The only precursor used in the sol-gel synthesis of the selective layer was organically linked 1,2-bis(triethoxysilyl)ethane (BTESE). The microporous structure of this layer enables sel

  4. White Matter Microstructure in Superior Longitudinal Fasciculus Associated with Spatial Working Memory Performance in Children

    DEFF Research Database (Denmark)

    Vestergaard, Martin; Madsen, Kathrine Skak; Baaré, William F C

    2011-01-01

    memory (SWM) performance improves significantly throughout the childhood years, and several lines of evidence implicate the left fronto-parietal cortices and connecting fiber tracts in SWM processing. Here we report results from a study of 76 typically developing children, 7 to 13 years of age. We...

  5. Performance of silicon pixel detectors at small track incidence angles for the ATLAS Inner Tracker upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Viel, Simon, E-mail: sviel@lbl.gov [Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, United States of America (United States); Banerjee, Swagato [Department of Physics, University of Wisconsin, Madison, WI, United States of America (United States); Brandt, Gerhard; Carney, Rebecca; Garcia-Sciveres, Maurice [Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, United States of America (United States); Hard, Andrew Straiton; Kaplan, Laser Seymour; Kashif, Lashkar [Department of Physics, University of Wisconsin, Madison, WI, United States of America (United States); Pranko, Aliaksandr [Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, United States of America (United States); Rieger, Julia [Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, United States of America (United States); II Physikalisches Institut, Georg-August-Universität, Göttingen (Germany); Wolf, Julian [Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, United States of America (United States); Wu, Sau Lan; Yang, Hongtao [Department of Physics, University of Wisconsin, Madison, WI, United States of America (United States)

    2016-09-21

    In order to enable the ATLAS experiment to successfully track charged particles produced in high-energy collisions at the High-Luminosity Large Hadron Collider, the current ATLAS Inner Detector will be replaced by the Inner Tracker (ITk), entirely composed of silicon pixel and strip detectors. An extension of the tracking coverage of the ITk to very forward pseudorapidity values is proposed, using pixel modules placed in a long cylindrical layer around the beam pipe. The measurement of long pixel clusters, detected when charged particles cross the silicon sensor at small incidence angles, has potential to significantly improve the tracking efficiency, fake track rejection, and resolution of the ITk in the very forward region. The performance of state-of-the-art pixel modules at small track incidence angles is studied using test beam data collected at SLAC and CERN. - Highlights: • Extended inner pixel barrel layers are proposed for the ATLAS ITk upgrade. • Test beam results at small track incidence angles validate this ATLAS ITk design. • Long pixel clusters are reconstructed with high efficiency at low threshold values. • Excellent angular resolution is achieved using pixel cluster length information.

  6. A framework for the integration of Green and Lean Six Sigma for superior sustainability performance

    DEFF Research Database (Denmark)

    Cherrafi, Anass; Elfezazi, Said; Govindan, Kannan

    2017-01-01

    Evidence suggests that Lean, Six Sigma and Green approaches make a positive contribution to the economic, social and environmental (i.e. sustainability) performance of organisations. However, evidence also suggests that organisations have found their integration and implementation challenging....... The purpose of this research is therefore to present a framework that methodically guides companies through a five stages and sixteen steps process to effectively integrate and implement the Green, Lean and Six Sigma approaches to improve their sustainability performance. To achieve this, a critical review...... of industries. The results showed that the integration of Lean Six Sigma and Green helped the organisations to averagely reduce their resources consumption from 20 to 40% and minimise the cost of energy and mass streams by 7–12%. The application of the framework should be gradual, the companies should assess...

  7. Superior recognition performance for happy masked and unmasked faces in both younger and older adults.

    Directory of Open Access Journals (Sweden)

    Joakim eSvard

    2012-11-01

    Full Text Available In the aging literature it has been shown that even though emotion recognition performance decreases with age, the decrease is less for happiness than other facial expressions. Studies in younger adults have also revealed that happy faces are more strongly attended to and better recognized than other emotional facial expressions. Thus, there might be a more age independent happy face advantage in facial expression recognition. By using a backward masking paradigm and varying stimulus onset asynchronies (17–267 ms the temporal development of a happy face advantage, on a continuum from low to high levels of visibility, was examined in younger and older adults. Results showed that across age groups, recognition performance for happy faces was better than for neutral and fearful faces at durations longer than 50 ms. Importantly, the results showed a happy face advantage already during early processing of emotional faces in both younger and older adults. This advantage is discussed in terms of processing of salient perceptual features and elaborative processing of the happy face. We also investigate the combined effect of age and neuroticism on emotional face processing. The rationale was previous findings of age related differences in physiological arousal to emotional pictures and a relation between arousal and neuroticism. Across all durations, there was an interaction between age and neuroticism, showing that being high in neuroticism might be disadvantageous for younger, but not older adults’ emotion recognition performance during arousal enhancing tasks. These results indicate that there is a relation between aging, neuroticism, and performance, potentially related to physiological arousal.

  8. Performance and track-based alignment of the Phase-1 upgraded CMS pixel detector

    CERN Document Server

    Botta, Valeria

    2017-01-01

    The Compact Muon Solenoid (CMS) detector is a multi-purpose detector constructed in order to study high-energy particle collisions at the Large Hadron Collider (LHC) at CERN. The all-silicon design of the tracking system of the CMS experiment provided excellent resolution for charged tracks and an efficient tagging of jets during Run 1 and Run 2 of the LHC. After the pixel detector of the CMS experiment was upgraded and installed during the shutdown in the beginning of 2017, the positions and orientations of the tracker modules needed to be determined with a precision of several micrometers. The alignment also needs to be quickly recalculated each time the state of the CMS magnet is changed between 0 T and 3.8 T. The latest results of the CMS tracker performance in the 2017 run are presented, with a special focus on alignment and resolution performance using several million reconstructed tracks from cosmic rays and collision data.

  9. Development and performance of track reconstruction algorithms at the energy frontier with the ATLAS detector

    CERN Document Server

    Gagnon, Louis-Guillaume; The ATLAS collaboration

    2016-01-01

    ATLAS track reconstruction code is continuously evolving to match the demands from the increasing instantaneous luminosity of LHC, as well as the increased centre-of-mass energy. With the increase in energy, events with dense environments, e.g. the cores of jets or boosted tau leptons, become much more abundant. These environments are characterised by charged particle separations on the order of ATLAS inner detector sensor dimensions and are created by the decay of boosted objects. Significant upgrades were made to the track reconstruction code to cope with the expected conditions during LHC Run 2. In particular, new algorithms targeting dense environments were developed. These changes lead to a substantial reduction of reconstruction time while at the same time improving physics performance. The employed methods are presented. In addition, physics performance studies are shown, e.g. a measurement of the fraction of lost tracks in jets with high transverse momentum.

  10. High concentration nitrogen doped carbon nanotube anodes with superior Li+ storage performance for lithium rechargeable battery application

    Science.gov (United States)

    Li, Xifei; Liu, Jian; Zhang, Yong; Li, Yongliang; Liu, Hao; Meng, Xiangbo; Yang, Jinli; Geng, Dongsheng; Wang, Dongniu; Li, Ruying; Sun, Xueliang

    2012-01-01

    A floating catalyst chemical vapor deposition method has been developed to synthesize carbon nanotubes doped with a high concentration of nitrogen. Their electrochemical performance as anodes for lithium ion batteries (LIBs) in comparison to pristine carbon nanotubes (CNTs) has been investigated. X-ray photoelectron spectroscopy results indicated that the nitrogen content reaches as high as 16.4 at.%. Bamboo-like compartments were fabricated as shown by high resolution transmission electron microscopy. High concentration nitrogen doped carbon nanotubes (HN-CNTs) show approximately double reversible capacity of CNTs: 494 mAh g-1 vs. 260 mAh g-1, and present a much better rate capability than CNTs. The significantly superior electrochemical performance could be related to the high electrical conductivity and the larger number of defect sites in HN-CNTs for anodes of LIBs.

  11. Rate of Force Development, Muscle Architecture, and Performance in Young Competitive Track and Field Throwers.

    Science.gov (United States)

    Zaras, Nikolaos D; Stasinaki, Angeliki-Nikoletta E; Methenitis, Spyridon K; Krase, Argyro A; Karampatsos, Giorgos P; Georgiadis, Giorgos V; Spengos, Konstantinos M; Terzis, Gerasimos D

    2016-01-01

    The rate of force development (RFD) is an essential component for performance in explosive activities, although it has been proposed that muscle architectural characteristics might be linked with RFD and power performance. The purpose of the study was to investigate the relationship between RFD, muscle architecture, and performance in young track and field throwers. Twelve young track and field throwers completed 10 weeks of periodized training. Before (T1) and after (T2) training performance was evaluated in competitive track and field throws, commonly used shot put tests, isometric leg press RFD, 1 repetition maximum (1RM) strength as well as vastus lateralis architecture and body composition. Performance in competitive track and field throwing and the shot put test from the power position increased by 6.76 ± 4.31% (p Rate of force development and 1RM strength also increased (p ≤ 0.05). Vastus lateralis thickness and fascicle length increased by 5.95 ± 7.13% (p = 0.012) and 13.41 ± 16.15% (p = 0.016), respectively. Significant correlations were found at T1 and T2, between performance in the shot put tests and both RFD and fascicle length (p ≤ 0.05). Close correlations were found between RFD, muscle thickness, and fascicle length (p ≤ 0.05). Significant correlations were found between the % changes in lean body mass and the % increases in RFD. When calculated together, the % increase in muscle thickness and RFD could predict the % increase in shot put throw test from the power position (p = 0.019). These results suggest that leg press RFD may predict performance in shot put tests that are commonly used by track and field throwers.

  12. Cobalt-based metal organic framework with superior lithium anodic performance

    Science.gov (United States)

    Hu, Xiaoshi; Hu, Huiping; Li, Chao; Li, Tian; Lou, Xiaobing; Chen, Qun; Hu, Bingwen

    2016-10-01

    The reversible charging of a Co-1,4-benzenedicarboxylate MOF (Co-BDC MOF) prepared via an one-pot solvothermal method was studied for use as the anode in a Li-ion cell. It was found that this MOF anode provides high reversible capacities (1090 and 611 mA h g-1 at current densities of 0.2 and 1 A g-1, respectively), and an impressive rate performance. Such an outstanding Li-ion storage property has not been reported previously for the LIB anodes within the MOFs category. Ex-situ X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR) studies of this material at different state of charge suggest that cobalt stays at Co2+ state during discharge/charge process, so that in this case Li+ may be inserted into the organic moiety without the direct participation of cobalt ions.

  13. Multifunctional graphene sheets embedded in silicone encapsulant for superior performance of light-emitting diodes.

    Science.gov (United States)

    Lee, Seungae; Hong, Jin-Yong; Jang, Jyongsik

    2013-07-23

    Graphene nanosheets with uniform shape are successfully incorporated into a silicone encapsulant of a light-emitting diode (LED) using a solvent-exchange approach which is a facile and straightforward method. The graphene nanosheets embedded in the silicone encapsulant have a multifunctional role which improves the performance of light-emitting diodes. The presence of graphene gives rise to effective heat dissipation, improvement of protection ability from external stimuli, such as moisture and hazardous gas, and enhancement of mechanical properties such as elastic modulus and fracture toughness. Consequently, the LEDs composed of a graphene-embedded silicone encapsulant exhibit long-term stability without loss of luminous efficiency by addition of relatively small amounts of graphene. This novel strategy offers a feasible candidate for their practical or industrial applications.

  14. TiO2 hollow microspheres with mesoporous surface: Superior adsorption performance for dye removal

    Science.gov (United States)

    Wang, Ran; Cai, Xia; Shen, Fenglei

    2014-06-01

    TiO2 hollow microspheres with mesoporous surface were synthesized by a facile template-assisted solvothermal reaction. The adsorption performance of TiO2 hollow microspheres for removing Methylene Blue from aqueous solution has been investigated. The comparative adsorption study indicated that adsorption capacity of TiO2 hollow microspheres with mesoporous surface is markedly higher than that of solid microsphere. The equilibrium data fitted well with the Langmuir model and the maximum adsorption capacity reached 196.83 mg/g. The kinetics of dye adsorption followed the pseudo-second-order model and the adsorbed dye could be degraded completely by the subsequent photocatalytic process. These TiO2 hollow microspheres can be considered as a low-cost alternative adsorbent for removal of organic pollutants from wastewater.

  15. Facile fabrication of graphene/nickel oxide composite with superior supercapacitance performance by using alcohols-reduced graphene as substrate

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Peng [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Zhang, Haiyan, E-mail: hyzhang@gdut.edu.cn [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Chen, Yiming [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Li, Zhenghui; Huang, Zhikun; Xu, Xingfa [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Li, Yunyong; Shi, Zhicong [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China)

    2015-09-25

    Highlights: • G/NiO was synthesized by using alcohols-reduced graphene as substrate. • G/NiO presents a globule-on-sheet structure and reveals a synergistic effect. • G/NiO displays high specific capacitance and superior cycling stability. - Abstract: Graphene/nickel oxide composite (G/NiO) was synthesized through a facile hydrothermal method and subsequently microwave thermal treatment by using alcohols-reduced graphene as substrate. The as-prepared G/NiO was characterized by X-ray diffraction, Raman spectra, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscope and transmission electron microscope. The results indicate that the graphene oxide has been successfully reduced to graphene, and NiO nanoparticles are homogeneous anchored on the surface of graphene, forming a globule-on-sheet structure. The loading content of NiO nanoparticles anchoring on the surface of graphene nanosheets can be controlled by adjusting the hydrothermal temperature. The G/NiO displays superior electrochemical performance with a specific capacitance of 530 F g{sup −1} at 1 A g{sup −1} in 2 M of NaOH. After 5000 cycles, the supercapacitor still maintains a specific capacitance of 490 F g{sup −1} (92% retention of the initial capacity), exhibiting excellent cycling stability.

  16. Impact of ionospheric scintillation on GNSS receiver tracking performance over Latin America: Introducing the concept of tracking jitter variance maps

    Science.gov (United States)

    Sreeja, V.; Aquino, M.; Elmas, Z. G.

    2011-10-01

    Scintillations are rapid fluctuations in the phase and amplitude of transionospheric radio signals caused by small-scale ionospheric plasma density irregularities. In the case of Global Navigation Satellite System (GNSS) receivers, scintillations can cause cycle slips, degrade the positioning accuracy and when severe enough can even lead to complete loss of signal lock. This study presents for the first time an assessment of GNSS receiver signal tracking performance under scintillating conditions, by the analysis of receiver phase lock loop (PLL) jitter variance maps. These maps can potentially assist users when faced with such conditions; a potential application envisaged for these maps would be in the form of a tool to provide users with information about "current (or expected, if some sort of prediction can be developed in follow on research) tracking conditions" under scintillation; another possibility would be to use the technique described by Aquino et al. (2009) to mitigate against the effects of ionospheric scintillation. In this paper these maps were constructed for scintillation events that were observed in the field during 9-11 March 2011 over Presidente Prudente (22.1°S, 51.4°W, dip latitude ˜12.3°S) in Brazil, a location close to the Equatorial Ionisation Anomaly (EIA) crest in Latin America. Results show that the jitter variances estimated for all the simultaneously observed satellite-to-receiver links during the premidnight hours on 9 and 11 March 2011 increase during the enhanced scintillation levels, indicating the likelihood for cycle slips, loss of signal lock, and degraded accuracy in the observations.

  17. Loss Performance Analysis of an Isolated Power Supply for Ultrafast Tracking Converters

    DEFF Research Database (Denmark)

    Nguyen-Duy, Khiem; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    This paper presents the loss performance analysis of an isolated power supply that is designed for ultra-fast tracking converters. The results of the analysis provide insights into the operation of the proposed power supply, how each physical component contributes to the total loss, and how its e...

  18. An Inside Story: Tracking Experiences, Challenges and Successes in a Joint Specialist Performing Arts College

    Science.gov (United States)

    Benn, Tansin; Benn, Barry; Doyle, Brigitte

    2006-01-01

    In England the government's specialist schools initiative is transforming the nature of secondary education. A three-year longitudinal case study tracked the effects of specialist performing arts college status on two schools. The sites were a mainstream school drawing pupils from an area of high social deprivation and disadvantage, and a special…

  19. Performance Characteristics of Long-Track Speed Skaters : A Literature Review

    NARCIS (Netherlands)

    Konings, Marco J.; Elferink-Gemser, Marije T.; Stoter, Inge K.; van der Meer, Dirk; Otten, Egbert; Hettinga, Florentina J.

    2015-01-01

    Speed skating is an intriguing sport to study from different perspectives due to the peculiar way of motion and the multiple determinants for performance. This review aimed to identify what is known on (long-track) speed skating, and which individual characteristics determine speed skating performan

  20. Superior lithium storage performance of hierarchical porous vanadium pentoxide nanofibers for lithium ion battery cathodes

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Bo [Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes, National Laboratory of Mineral Materials, School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Energy & Materials Engineering Centre, College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387 (China); National Key Laboratory of Power Sources, Tianjin Institute of Power Sources, Tianjin 300381 (China); Li, Xifei, E-mail: xfli2011@hotmail.com [Energy & Materials Engineering Centre, College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387 (China); Bai, Zhimin, E-mail: zhimibai@cugb.edu.cn [Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes, National Laboratory of Mineral Materials, School of Materials Science and Technology, China University of Geosciences, Beijing 100083 (China); Li, Minsi [Department of Chemistry, University of Science and Technology of China, Hefei, Anhui 230026 (China); Dong, Lei; Xiong, Dongbin [Energy & Materials Engineering Centre, College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387 (China); Li, Dejun, E-mail: dejunli@mail.tjnu.edu.cn [Energy & Materials Engineering Centre, College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387 (China)

    2015-06-15

    Highlights: • Hierarchical porous vanadium pentoxide nanofibers were synthesized by electrospinning. • V{sub 2}O{sub 5} nanofibers showed much enhanced lithium storage performance. • Kinetics process of electrospinning V{sub 2}O{sub 5} nanofibers was studied by means of EIS for the first time. • Strategies to enhance the electrochemical performance of V{sub 2}O{sub 5} electrode were concluded. - Abstract: The hierarchical V{sub 2}O{sub 5} nanofibers cathode materials with diameter of 200–400 nm are successfully synthesized via an electrospinning followed by annealing. Powder X-ray diffraction (XRD) pattern confirms the formation of phase-pure product. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) obviously display the hierarchical porous nanofibers constructed by attached tiny vanadium oxide nanoplates. Electrochemical behavior of the as-prepared product is systematically studied using galvanostatic charge/discharge testing, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). It turns out that in comparison to the commercial V{sub 2}O{sub 5} and other unique nanostructured materials in the literature, our V{sub 2}O{sub 5} nanofibers show much enhanced lithium storage capacity, improved cyclic stability, and higher rate capability. After 100 cycles at a current density of 800 mA g{sup −1}, the specific capacity of the V{sub 2}O{sub 5} nanofibers retain 133.9 mAh g{sup −1}, corresponding to high capacity retention of 96.05%. More importantly, the EIS at various discharge depths clearly reveal the kinetics process of the V{sub 2}O{sub 5} cathode reaction with lithium. Based on our results, the possible approach to improve the specific capacity and rate capability of the V{sub 2}O{sub 5} cathode material is proposed. It is expected that this study could accelerate the development of V{sub 2}O{sub 5} cathode in rechargeable lithium ion batteries.

  1. Selection for superior growth advances the onset of puberty and increases reproductive performance in ewe lambs.

    Science.gov (United States)

    Rosales Nieto, C A; Ferguson, M B; Macleay, C A; Briegel, J R; Martin, G B; Thompson, A N

    2013-06-01

    The reproductive efficiency of the entire sheep flock could be improved if ewe lambs go through puberty early and produce their first lamb at 1 year of age. The onset of puberty is linked to the attainment of critical body mass, and therefore we tested whether it would be influenced by genetic selection for growth rate or for rate of accumulation of muscle or fat. We studied 136 Merino ewe lambs with phenotypic values for depth of eye muscle (EMD) and fat (FAT) and Australian Sheep Breeding Values at post-weaning age (200 days) for live weight (PWT), eye muscle depth (PEMD) and fat depth (PFAT). First oestrus was detected with testosterone-treated wethers and then entire rams as the ewes progressed from 6 to 10 months of age. Blood concentrations of leptin and IGF-I were measured to test whether they were related to production traits and reproductive performance (puberty, fertility and reproductive rate). In total, 97% of the lambs reached first oestrus at average weight 39.4 ± 0.4 kg (mean ± s.e.m.) and age 219 days (range 163 to 301). Age at first oestrus decreased with increases in values for PWT (P growth can accelerate the onset of puberty and increase fertility and reproductive rate of Merino ewe lambs. The metabolic hormones, IGF-I and leptin, might act as a physiological link between the growing tissues and the reproductive axis.

  2. Vertical jumping performance of bonobo (Pan paniscus) suggests superior muscle properties.

    Science.gov (United States)

    Scholz, Melanie N; D'Août, Kristiaan; Bobbert, Maarten F; Aerts, Peter

    2006-09-07

    Vertical jumping was used to assess muscle mechanical output in bonobos and comparisons were drawn to human jumping. Jump height, defined as the vertical displacement of the body centre of mass during the airborne phase, was determined for three bonobos of varying age and sex. All bonobos reached jump heights above 0.7 m, which greatly exceeds typical human maximal performance (0.3-0.4m). Jumps by one male bonobo (34 kg) and one human male (61.5 kg) were analysed using an inverse dynamics approach. Despite the difference in size, the mechanical output delivered by the bonobo and the human jumper during the push-off was similar: about 450 J, with a peak power output close to 3000 W. In the bonobo, most of the mechanical output was generated at the hips. To account for the mechanical output, the muscles actuating the bonobo's hips (directly and indirectly) must deliver muscle-mass-specific power and work output of 615 Wkg-1 and 92 Jkg-1, respectively. This was twice the output expected on the basis of muscle mass specific work and power in other jumping animals but seems physiologically possible. We suggest that the difference is due to a higher specific force (force per unit of cross-sectional area) in the bonobo.

  3. Performance study involving a force-reflecting joystick for spastic individuals performing two types of tracking tasks.

    Science.gov (United States)

    Repperger, D W; Phillips, C A; Chelette, T L

    1995-10-01

    10 upper-extremity spastic subjects and 10 normal subjects were studied with a force-reflecting joystick in the performance of a continuous time-tracking task as well as an acquisition task termed, "Fitts' Law." Certain force-reflection paradigms, in a spatial sense, allowed the spastic subjects to obtain performance proficiency near levels of the normal subjects as measured by a capacity metric.

  4. Tracking performance and global stability guaranteed neural control of uncertain hypersonic flight vehicle

    Directory of Open Access Journals (Sweden)

    Tao Teng

    2016-02-01

    Full Text Available In this article, a global adaptive neural dynamic surface control with predefined tracking performance is developed for a class of hypersonic flight vehicles, whose accurate dynamics is hard to obtain. The control scheme developed in this paper overcomes the limitations of neural approximation region by employing a switching mechanism which incorporates an additional robust controller outside the neural approximation region to pull the transient state variables back when they overstep the neural approximation region, such that globally uniformly ultimately bounded stability can be guaranteed. Especially, the developed global adaptive neural control also improves the tracking performance by introducing an error transformation mechanism, such that both transient and steady-state performance can be shaped according to the predefined bounds. Simulation studies on the hypersonic flight vehicle validate that the designed controller has good velocity modulation and velocity stability performance.

  5. Monitoring the tracking performance of the ATLAS trigger for electrons in Z->ee decays

    CERN Document Server

    Langford, Jonathon

    2016-01-01

    This project was carried out to develop an algorithm which monitors the performance of the tracking system in the ATLAS trigger. The algorithm uses tag and probe methods to measure the efficiency of the tracking for electrons by looking at Z → ee candidates. Once this method is validated, the ultimate goal is to implement the algorithm into the High-Level-Trigger (HLT) of ATLAS whilst online. The advantage of this technique over traditional offline monitoring is continuous feedback during data taking and higher available statistics. In this report the results of an offline analysis are presented, showing electron tracking efficiencies between 96% and 99% across almost all regions of the inner detector (run 306278).

  6. Intelligent Motion Compensation for Improving the Tracking Performance of Shipborne Phased Array Radar

    Directory of Open Access Journals (Sweden)

    J. Mar

    2013-01-01

    Full Text Available The shipborne phased array radar must be able to compensate the ship’s motion and track the maneuvering targets automatically. In this paper, the real-time beam pointing error compensation mechanism of a planar array antenna for ship’s motion is designed to combine with the Kalman filtering. The effect of beam pointing error on the tracking performance of shipborne phased array radar is examined. A compensation mechanism, which can automatically correct the beam pointing error of the planar antenna array, is proposed for shipborne phased array radar in order to achieve the required tracking accuracy over the long dwell time. The automatic beam pointing error compensation mechanism employs the parallel fuzzy basis function network (FBFN architecture to estimate the beam pointing error caused by roll and pitch of the ship. In the simulation, the models of roll and pitch are used to evaluate the performance of beam pointing error estimation mechanism based on the proposed parallel FBFN architecture. In addition, the effect of automatic beam pointing error compensation mechanism on the tracking performance of adaptive extended Kalman filter (AEKF implemented in ship borne phased array radar is also investigated. Simulations find out that the proposed algorithms are stable and accurate.

  7. The Feasibility of Performing Particle Tracking Based Flow Measurements with Acoustic Cameras

    Science.gov (United States)

    2017-08-01

    insonified volume (the out-of- plane dimension in the top-down view) ranges from 28 centimeters (cm) to 55 cm. This means that particles that appear to be...ER D C/ CH L SR -1 7- 1 Dredging Operations and Environmental Research Program The Feasibility of Performing Particle - Tracking-Based...acwc.sdp.sirsi.net/client/default. Dredging Operations and Environmental Research Program ERDC/CHL SR-17-1 August 2017 The Feasibility of Performing Particle

  8. Simulation and performance of an artificial retina for 40 MHz track reconstruction

    OpenAIRE

    2014-01-01

    We present the results of a detailed simulation of the artificial retina pattern-recognition algorithm, designed to reconstruct events with hundreds of charged-particle tracks in pixel and silicon detectors at LHCb with LHC crossing frequency of $40\\,\\rm MHz$. Performances of the artificial retina algorithm are assessed using the official Monte Carlo samples of the LHCb experiment. We found performances for the retina pattern-recognition algorithm comparable with the full LHCb reconstruction ...

  9. Visual tracking speed is related to basketball-specific measures of performance in NBA players.

    Science.gov (United States)

    Mangine, Gerald T; Hoffman, Jay R; Wells, Adam J; Gonzalez, Adam M; Rogowski, Joseph P; Townsend, Jeremy R; Jajtner, Adam R; Beyer, Kyle S; Bohner, Jonathan D; Pruna, Gabriel J; Fragala, Maren S; Stout, Jeffrey R

    2014-09-01

    The purpose of this study was to determine the relationship between visual tracking speed (VTS) and reaction time (RT) on basketball-specific measures of performance. Twelve professional basketball players were tested before the 2012-13 season. Visual tracking speed was obtained from 1 core session (20 trials) of the multiple object tracking test, whereas RT was measured by fixed- and variable-region choice reaction tests, using a light-based testing device. Performance in VTS and RT was compared with basketball-specific measures of performance (assists [AST]; turnovers [TO]; assist-to-turnover ratio [AST/TO]; steals [STL]) during the regular basketball season. All performance measures were reported per 100 minutes played. Performance differences between backcourt (guards; n = 5) and frontcourt (forward/centers; n = 7) positions were also examined. Relationships were most likely present between VTS and AST (r = 0.78; p basketball-specific performance measures. Backcourt players were most likely to outperform frontcourt players in AST and very likely to do so for VTS, TO, and AST/TO. In conclusion, VTS seems to be related to a basketball player's ability to see and respond to various stimuli on the basketball court that results in more positive plays as reflected by greater number of AST and STL and lower turnovers.

  10. Acute Effect of Countermovement Jumping on Throwing Performance in Track and Field Athletes During Competition.

    Science.gov (United States)

    Karampatsos, Giorgos P; Korfiatis, Panagiotis G; Zaras, Nikolaos D; Georgiadis, Giorgos V; Terzis, Gerasimos D

    2017-02-01

    Karampatsos, GP, Korfiatis, PG, Zaras, ND, Georgiadis, GV, and Terzis, GD. Acute effect of countermovement jumping on throwing performance in track and field athletes during competition. J Strength Cond Res 32(1): 359-364, 2017-The purpose of the study was to investigate whether performing 3 consecutive countermovement jumps (CMJs) just before an attempt enhances performance in track and field throwers during competition. Twelve shot putters, 8 hammer throwers, 9 discus throwers, and 3 javelin throwers of both sexes participated in the study. They performed 3 maximal CMJs 85 ± 12 seconds before the second, fourth, and sixth attempt during 3 different official competitions of national level. Maximal strength (1 repetition maximum [1RM]) in squat and bench press was measured 1 week after the competition. Mean throwing performance was significantly higher after the CMJs intervention (2.66 ± 4.3%, range of increase 0.02-18.98%, p = 0.0001). Similarly, maximum throwing performance was significantly higher after the CMJs (2.76 ± 3.29%, range of increase 0.09-13.93%, p = 0.0009). All but 2 athletes increased their best performance after the CMJs. The percentage increase in performance was similar between sexes (male athletes 2.56 ± 3.01%; female athletes 3.06 ± 3.76%, p = 0.677), but it was higher for the "lighter throws" (discus and javelin throw: 4.66 ± 4.11%) compared with the "heavier throws" (shot and hammer throw: 1.62 ± 2.04%, p = 0.008). The percentage increase in performance was not significantly correlated with 1RM squat or bench press, anthropometric characteristics, and personal best performance. These results suggest that performing 3 CMJs approximately 1 minute before an attempt may increase track and field throwing performance during competition.

  11. Hierarchical porous NiCo2O4 nanosheet arrays directly grown on carbon cloth with superior lithium storage performance.

    Science.gov (United States)

    Zhao, Li; Wang, Lei; Yu, Peng; Tian, Chungui; Feng, He; Diao, Zhongwei; Fu, Honggang

    2017-03-23

    Binary metal oxides have been explored as advanced candidates in lithium-ion battery (LIB) anodes due to their high specific capacity. Herein, the hierarchical structures of porous NiCo2O4 nanosheets directly grown on a conductive carbon cloth substrate (3D NCO-PSA/CC) were obtained by a facile in situ synthetic strategy. When applied as a binder-free LIB anode, it exhibited satisfactory performance with a high discharge capacity (a first discharge capacity of 2090.8 mA h g(-1) and a stable capacity of 1687.6 mA h g(-1) at 500 mA g(-1)), superior rate capacity (discharge capacity of 375.5 mA h g(-1) at 6000 mA g(-1)) and excellent reversibility (coulombic efficiency of approximately 100%). The outstanding performances should be attributed to the 3D porous structures, nanosheets and good conductivity of NCO-PSA/CC that could not only ensure the rapid transport of Li(+) ions and electrons but also remit the huge volume change during lithiation/delithiation processes. Undoubtedly, the present facile and effective strategy can be extended to other binary metal-oxide materials for use as high-performance energy storage and conversion devices.

  12. Accomplishments and Compromises in Prediction Research for World Records and Best Performances in Track and Field and Swimming

    Science.gov (United States)

    Liu, Yuanlong; Paul, Stanley; Fu, Frank H.

    2012-01-01

    The conductors of this study reviewed prediction research and studied the accomplishments and compromises in predicting world records and best performances in track and field and swimming. The results of the study showed that prediction research only promises to describe the historical trends in track and field and swimming performances, to study…

  13. Effects of flunixin on movement and performance of standardbred trotters on the track.

    Science.gov (United States)

    Kallings, P; Johnston, C; Drevemo, S

    1999-07-01

    An often discussed and controversial issue is the effect of nonsteroidal anti-inflammatory drugs (NSAIDs) on performance. The purpose of this study was to investigate the effect of the NSAID flunixin on the movement pattern and performance capacity of Standardbred trotters using a standardised track model. Five adult Standardbred horses in training trotted at 2 occasions with a 2 week interval on the same oval dirt track. Before each occasion the horses were either injected with flunixin meglumine (Finadyne) or normal saline solution i.m. 4 h before the performance test (double blind crossover study). The kinematics for 5 consecutive strides were filmed. There was no significant difference in maximal speed between the saline and flunixin treatment sessions. Significant changes in the movement pattern were observed as an effect of the flunixin treatment. The horses maintained the same stride duration while significantly decreasing stance time and increasing swing time in the forelimbs. The horses' range of limb angle decreased significantly. Heart rates were monitored and plasma lactate and flunixin concentrations were measured. No significant differences were found in heart rate and plasma lactate. The results indicate that flunixin had a significant effect on locomotor pattern while it did not effect metabolic response in these horses (considered to represent a normal race track population). The overall effect on performance in racing horses may therefore be related to the anti-inflammatory and analgesic properties of NSAIDs by masking pain and lameness.

  14. Robust Slippery Coating with Superior Corrosion Resistance and Anti-Icing Performance for AZ31B Mg Alloy Protection.

    Science.gov (United States)

    Zhang, Jialei; Gu, Changdong; Tu, Jiangping

    2017-03-29

    Biomimetic slippery liquid-infused porous surfaces (SLIPSs) are developed as a potential alternative to superhydrophobic surfaces (SHSs) to resolve the issues of poor durability in corrosion protection and susceptibility to frosting. Herein, we fabricated a double-layered SLIPS coating on the AZ31 Mg alloy for corrosion protection and anti-icing application. The porous top layer was infused by lubricant, and the compact underlayer was utilized as a corrosion barrier. The water-repellent SLIPS coating exhibits a small sliding angle and durable corrosion resistance compared with the SHS coating. Moreover, the SLIPS coating delivers durable anti-icing performance for the Mg alloy substrate, which is obviously superior to the SHS coating. Multiple barriers in the SLIPS coating, including the infused water-repellent lubricant, the self-assembled monolayers coated porous top layer, and the compact layered double hydroxide-carbonate composite underlayer, are suggested as being responsible for the enhanced corrosion resistance and anti-icing performance. The robust double-layered SLIPS coating should be of great importance to expanding the potential applications of light metals and their alloys.

  15. Unlocking the Origin of Superior Performance of a Si-Ge Core-Shell Nanowire Quantum Dot Field Effect Transistor.

    Science.gov (United States)

    Dhungana, Kamal B; Jaishi, Meghnath; Pati, Ranjit

    2016-07-13

    The sustained advancement in semiconducting core-shell nanowire technology has unlocked a tantalizing route for making next generation field effect transistor (FET). Understanding how to control carrier mobility of these nanowire channels by applying a gate field is the key to developing a high performance FET. Herein, we have identified the switching mechanism responsible for the superior performance of a Si-Ge core-shell nanowire quantum dot FET over its homogeneous Si counterpart. A quantum transport approach is used to investigate the gate-field modulated switching behavior in electronic current for ultranarrow Si and Si-Ge core-shell nanowire quantum dot FETs. Our calculations reveal that for the ON state, the gate-field induced transverse localization of the wave function restricts the carrier transport to the outer (shell) layer with the pz orbitals providing the pathway for tunneling of electrons in the channels. The higher ON state current in the Si-Ge core-shell nanowire FET is attributed to the pz orbitals that are distributed over the entire channel; in the case of Si nanowire, the participating pz orbital is restricted to a few Si atoms in the channel resulting in a smaller tunneling current. Within the gate bias range considered here, the transconductance is found to be substantially higher in the case of a Si-Ge core-shell nanowire FET than in a Si nanowire FET, which suggests a much higher mobility in the Si-Ge nanowire device.

  16. Position Affects Performance in Multiple-Object Tracking in Rugby Union Players

    Directory of Open Access Journals (Sweden)

    Andrés Martín

    2017-09-01

    Full Text Available We report an experiment that examines the performance of rugby union players and a control group composed of graduate student with no sport experience, in a multiple-object tracking task. It compares the ability of 86 high level rugby union players grouped as Backs and Forwards and the control group, to track a subset of randomly moving targets amongst the same number of distractors. Several difficulties were included in the experimental design in order to evaluate possible interactions between the relevant variables. Results show that the performance of the Backs is better than that of the other groups, but the occurrence of interactions precludes an isolated groups analysis. We interpret the results within the framework of visual attention and discuss both, the implications of our results and the practical consequences.

  17. Probabilistic forecasting of ionospheric scintillation and GNSS receiver signal tracking performance at high latitudes

    Directory of Open Access Journals (Sweden)

    Paul Prikryl

    2013-06-01

    Full Text Available At high latitudes, phase scintillation occurs predominantly on the dayside in the ionospheric footprint of the magnetospheric cusp, and in the nightside auroral oval. A new technique of probabilistic forecasting of phase scintillation occurrence relative to the arrival time of high-speed solar wind from coronal holes and interplanetary coronal mass ejections has recently been proposed [Prikryl et al. 2012]. Cumulative probability distribution functions for the phase-scintillation occurrence that are obtained can be specified for low (below-median and high (above-median values of various solar wind plasma parameters. Recent advances in modeling of high-speed solar wind and coronal mass ejections, combined with the probabilistic forecasting of scintillation, will lead to improved operational space weather forecasting applications. Scintillation forecasting and mitigation techniques need to be developed to avoid potential costly failures of technology-based Global Navigation Satellite Systems in the near future, in particular during the upcoming solar maximum. The Global Navigation Satellite Systems receiver-tracking performance during severe scintillation conditions can be assessed by the analysis of receiver phase-locked-loop jitter. Tracking jitter maps [Sreeja et al. 2011] offers a potentially useful tool to provide users with expected tracking conditions, if based on scintillation predictions as proposed above. Scintillation indices are obtained from L1 GPS data collected with the Canadian High Arctic Ionospheric Network. Combined with high rate amplitude and phase data, they can be used as input to receiver tracking models to develop scintillation mitigation techniques.

  18. Preventive Maintenance of Railway Tracks: Ballast Performance Anticipation in the Cameroon Railway

    Directory of Open Access Journals (Sweden)

    Lezin Seba Minsili

    2012-03-01

    Full Text Available The aim of the present research study is to produce a methodology that provides an understanding of the mechanical behaviour of ballast and its degradation in order to reflect field performance of different ballast materials used by CAMRAIL in their railway network, and to better anticipate an efficient planning of the railway track maintenance. Based on existed literature, on collected data of different railway sections, and on the finite element analysis of the vehicle-track mechanical interaction, a preventive ballast cleaning and renewal strategy, formulated through ballast deterioration indexes is proposed. Comparing to the ongoing dayto- day maintenance strategy the proposed functionality-based preventive maintenance offers the following advantages: security and comfort of users; forecasting of ballast corrective measures; planned maintenance actions; higher functional and exploitation level of the track and availability of needed materials and mechanisms. The administration of CAMRAIL has promised to extend further the findings of this work in other to fully optimized the track maintenance cost in each railway section.

  19. Track based alignment of the CMS silicon tracker and its implication on physics performance

    Energy Technology Data Exchange (ETDEWEB)

    Draeger, Jula

    2011-08-15

    In order to fully exploit the discovery potential of the CMS detector for new physics beyond the Standard Model at the high luminosity and centre-of-mass energy provided by the Large Hadron Collider, a careful calibration of the detector and profound understanding of its impact on physics performance are necessary to provide realistic uncertainties for the measurements of physics processes. This thesis describes the track-based alignment of the inner tracking system of CMS with the Millepede II algorithm. Using the combined information of tracks from cosmic rays and collisions taken in 2010, a remarkable local alignment precision has been reached that meets the design specification for most regions of the detector and takes into account instabilities of the detector geometry over time. In addition, the impact of the alignment of b tagging or the Z boson resonance are investigated. The latter is studied to investigate the impact of correlated detector distortions which hardly influence the overall solution of the minimisation problem but introduce biases in the track parameters and thus the derived physics quantities. The determination and constraint of these weak modes present the future challenge of the alignment task at CMS. (orig.)

  20. Implementation and Performance of the Alignment of the ATLAS Inner Detector Tracking System

    CERN Document Server

    Kollar, D; The ATLAS collaboration

    2010-01-01

    The Large Hadron Collider (LHC) at CERN is the world's largest particle accelerator. After a successful initial run at 900 GeV in 2009, during 2010, LHC has collided proton beams at an unprecedented centre of mass energy of 7 TeV. ATLAS is a multipurpose experiment that records the products of the LHC collisions. To reconstruct trajectories of charged particles produced in these collisions, ATLAS is equipped with a tracking system built on two different technologies: silicon planar sensors and drift-tube based detectors, constituting the ATLAS Inner Detector. In order to achieve its scientific goals, ATLAS tracking performance requirements are quite exigent. The goal of the alignment is set such that the limited knowledge of the sensor locations should not deteriorate the resolution of the track parameters by more than 20% with respect to the intrinsic tracker resolution. Thus the required precision for the alignment of the silicon sensors is below 10 micrometers. The alignment of the ATLAS tracking system re...

  1. The Design of High Performance, Low Power Triple-Track Magnetic Sensor Chip

    Directory of Open Access Journals (Sweden)

    Junning Chen

    2013-07-01

    Full Text Available This paper presents a design of a high performance and low power consumption triple-track magnetic sensor chip which was fabricated in TSMC 0.35 μm CMOS process. This chip is able to simultaneously sense, decode and read out the information stored in triple-track magnetic cards. A reference voltage generating circuit, a low-cost filter circuit, a power-on reset circuit, an RC oscillator, and a pre-decoding circuit are utilized as the basic modules. The triple-track magnetic sensor chip has four states, i.e., reset, sleep, swiping card and data read-out. In sleep state, the internal RC oscillator is closed, which means that the digital part does not operate to optimize energy consumption. In order to improve decoding accuracy and expand the sensing range of the signal, two kinds of circuit are put forward, naming offset correction circuit, and tracking circuit. With these two circuits, the sensing function of this chip can be more efficiently and accurately. We simulated these circuit modules with TSMC technology library. The results showed that these modules worked well within wide range input signal. Based on these results, the layout and tape-out were carried out. The measurement results showed that the chip do function well within a wide swipe speed range, which achieved the design target.

  2. The design of high performance, low power triple-track magnetic sensor chip.

    Science.gov (United States)

    Wu, Xiulong; Li, Minghua; Lin, Zhiting; Xi, Mengyuan; Chen, Junning

    2013-07-09

    This paper presents a design of a high performance and low power consumption triple-track magnetic sensor chip which was fabricated in TSMC 0.35 μm CMOS process. This chip is able to simultaneously sense, decode and read out the information stored in triple-track magnetic cards. A reference voltage generating circuit, a low-cost filter circuit, a power-on reset circuit, an RC oscillator, and a pre-decoding circuit are utilized as the basic modules. The triple-track magnetic sensor chip has four states, i.e., reset, sleep, swiping card and data read-out. In sleep state, the internal RC oscillator is closed, which means that the digital part does not operate to optimize energy consumption. In order to improve decoding accuracy and expand the sensing range of the signal, two kinds of circuit are put forward, naming offset correction circuit, and tracking circuit. With these two circuits, the sensing function of this chip can be more efficiently and accurately. We simulated these circuit modules with TSMC technology library. The results showed that these modules worked well within wide range input signal. Based on these results, the layout and tape-out were carried out. The measurement results showed that the chip do function well within a wide swipe speed range, which achieved the design target.

  3. Performance in Post-compulsory Education: Evidence from Vocational and Academic Tracks

    OpenAIRE

    Cristina Lopez-Mayan

    2013-01-01

    This paper investigates the factors in_uencing grade performance in two different high school tracks (academic and vocational), including the effect of the amount of work achieved while studying. The empirical strategy analyzes grade progression through the outcomes, passing, repeating and dropping out, conditioning on previous outcomes, and dealing with the endogeneity introduced by the working variable. The analysis is based on a unique Spanish data with information on schooling and labor h...

  4. Assessing the performance of vessel wall tracking algorithms: the importance of the test phantom

    Science.gov (United States)

    Ramnarine, K. V.; Kanber, B.; Panerai, R. B.

    2004-01-01

    There is widespread clinical interest in assessing the mechanical properties of tissues and vessel walls. This study investigated the importance of the test phantom in providing a realistic assessment of clinical wall tracking performance for a variety of ultrasound modalities. B-mode, colour Doppler and Tissue Doppler Imaging (TDI) cineloop images were acquired using a Philips HDI5000 scanner and L12-5 probe. In-vivo longitudinal sections of 30 common carotid arteries and in-vitro images of pulsatile flow of a blood mimicking fluid through walled and wall-less tissue and vessel mimicking flow phantoms were analysed. Vessel wall tracking performance was assessed for our new probabilistic B-mode algorithm (PROBAL), and 3 different techniques implemented by Philips Medical Systems, based on B-mode edge detection (LDOT), colour Doppler (CVIQ) and TDI (TDIAWM). Precision (standard deviation/mean) of the peak systole dilations for respective PROBAL, LDOT, CVIQ and TDIAWM techniques were: 15.4 +/- 8.4%, 23 +/- 12.7%, 10 +/- 10% and 10.3 +/- 8.1% for the common carotid arteries; 6.4%, 22%, 11.6% and 34.5% for the wall-less flow phantom, 5.3%, 9.8%, 23.4% and 2.7% for the C-flex walled phantom and 3.9%, 2.6%, 1% and 3.2% for the latex walled phantom. The test phantom design and construction had a significant effect on the measurement of wall tracking performance.

  5. Tracking Performance Analysis and Control of a Small Robotic Telescope System

    Science.gov (United States)

    Riel, T.; Saathof, R.; Katalenic, A.; Schitter, G.

    2016-09-01

    This paper analyses the achievable precision of an equatorially mounted telescope system with two direct-drive permanent magnet synchronous motors. The analysis is done using a combination of physical system modeling and dynamic error budgeting. The parameters of the physical system are obtained by system identification and parameter estimation for various telescope positions. Using this system model, the limiting performance of the telescope system is simulated. Based on the identification data, a feedback controller is designed and implemented for the telescope system. The performance is verified experimentally by measurements recorded at tracking speeds of up to 5 °/s and several positions. The experimental results reveal a maximal servo tracking error of 1.3 arcseconds for the dec.-axis and 0.5 arcseconds for the r.a.-axis, which occurs at the maximal speed of 5 °/s. The experimental results are in good agreement with the simulation results, verifying the proposed method. This method provides a powerful tool to compare various systems by simulation as well as to optimize the performance of robotic telescope systems for tracking of NEOs to improve space situation awareness.

  6. Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1987-01-01

    1.1 This test method covers the determination of thermal performance of tracking concentrating solar collectors that heat fluids for use in thermal systems. 1.2 This test method applies to one- or two-axis tracking reflecting concentrating collectors in which the fluid enters the collector through a single inlet and leaves the collector through a single outlet, and to those collectors where a single inlet and outlet can be effectively provided, such as into parallel inlets and outlets of multiple collector modules. 1.3 This test method is intended for those collectors whose design is such that the effects of diffuse irradiance on performance is negligible and whose performance can be characterized in terms of direct irradiance. Note 1—For purposes of clarification, this method shall apply to collectors with a geometric concentration ratio of seven or greater. 1.4 The collector may be tested either as a thermal collection subsystem where the effects of tracking errors have been essentially removed from t...

  7. Biomarkers in Sports and Exercise: Tracking Health, Performance, and Recovery in Athletes.

    Science.gov (United States)

    Lee, Elaine C; Fragala, Maren S; Kavouras, Stavros A; Queen, Robin M; Pryor, John Luke; Casa, Douglas J

    2017-10-01

    Lee, EC, Fragala, MS, Kavouras, SA, Queen, RM, Pryor, JL, and Casa, DJ. Biomarkers in sports and exercise: tracking health, performance, and recovery in athletes. J Strength Cond Res 31(10): 2920-2937, 2017-Biomarker discovery and validation is a critical aim of the medical and scientific community. Research into exercise and diet-related biomarkers aims to improve health, performance, and recovery in military personnel, athletes, and lay persons. Exercise physiology research has identified individual biomarkers for assessing health, performance, and recovery during exercise training. However, there are few recommendations for biomarker panels for tracking changes in individuals participating in physical activity and exercise training programs. Our approach was to review the current literature and recommend a collection of validated biomarkers in key categories of health, performance, and recovery that could be used for this purpose. We determined that a comprehensive performance set of biomarkers should include key markers of (a) nutrition and metabolic health, (b) hydration status, (c) muscle status, (d) endurance performance, (e) injury status and risk, and (f) inflammation. Our review will help coaches, clinical sport professionals, researchers, and athletes better understand how to comprehensively monitor physiologic changes, as they design training cycles that elicit maximal improvements in performance while minimizing overtraining and injury risk.

  8. Development of high performance nano-porous polyethersulfone ultrafiltration membranes with hydrophilic surface and superior antifouling properties

    Energy Technology Data Exchange (ETDEWEB)

    Rahimpour, Ahmad, E-mail: ahmadrahimpour@yahoo.com [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of); Madaeni, Sayed Siavash [Membrane Research Center, Department of Chemical Engineering, Razi University, Kermanshah (Iran, Islamic Republic of); Jahanshahi, Mohsen [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of); Mansourpanah, Yaghoub [Department of Chemistry, Faculty of Science, Lorestan University, Khorramabad (Iran, Islamic Republic of); Mortazavian, Narmin [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of)

    2009-08-30

    Hydrophilic nano-porous polyethersulfone ultrafiltration membranes were developed for milk concentration. The membranes were prepared from new dope solution containing polyethersulfone (PES)/polyvinylpirrolidone (PVP)/polyethyleneglycole (PEG)/cellulose acetate phthalate (CAP)/acrylic acid/Triton X-100 using phase inversion induced by immersion precipitation technique. This casting solution leads to formation of new hydrophilic membranes. The morphological studies were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). In addition, the hydrophilicity and performance of membranes were examined by contact angel measurements and cross-flow filtration (pure water flux, milk water permeation, protein rejection and antifouling measurements). The contact angle measurements indicate that a surface with superior hydrophilicity was obtained for PES membranes. Two concentrations of PES (16 and 14.4 wt.%) and two different non-solvents (pure water and mixtures of water and IPA) were used for preparation of membranes. The morphological studies showed that the higher concentration of PES and the presence of IPA in the gelation media results in formation of a membrane with a dense top and sub-layer with small pores on the surface. The pure water flux of membranes was decreased when higher polymer concentration and mixtures of water and IPA were employed for membrane formation. On the other hand, the milk water permeation and protein rejection were increased using mixtures of water and IPA as non-solvent. Furthermore, the fouling analysis of the membranes demonstrated that the membrane surface with fewer tendencies for fouling was obtained.

  9. Cross-track Infrared Sounder (CRIS) Instrument In-flight Performance

    OpenAIRE

    Zavyalov, Vladimir; Bingham, Gail; Esplin, Mark; Greenman, Mark; Scott, Deron; Graham, Brandon; Major, Charles; Phillips, Lee

    2012-01-01

    The Cross-track Infrared Sounder (CrIS) sensor was launched on the Suomi NPP spacecraft October 28, 2011. The CrIS sensor is a Michelson interferometer with a 3 x 3 detectors for each of three spectral bands: LWIR 650-1095 wavenumbers, MWIR 1210-1750 wavenumbers and SWIR 2155-2550 wavenumbers. The CrIS sensor is performing very well and is generally exceeding the noise, radiometric and spectral performance requirements for its primary weather sensing mission. However, for climate change appli...

  10. Frequency Tracking Performance Using a Hyperbolic Digital-Phase Locked Loop for Ka-Band Communication in Rain Fading Channels

    Science.gov (United States)

    Sithamparanathan, Kandeepan; Piesiewicz, Radoslaw

    In this paper we study and present some results on the performances of frequency tracking for Ka-band satellite communications in rain fading channels. The carrier frequency is tracked using a 2nd order hyperbolic phase detector based digital-phase locked loop (D-PLL). The hyperbolic D-PLL has the capability of extending the tracking range compared to the other D-PLL and hence can be designed such that to achieve low phase jitter performance for improved carrier tracking. We present the design and analysis of the D-PLL and show some simulation results on the frequency tracking performance for Ka-band rain fading channel. The results are compared with the non-fading noise only case and comparative analyses are made.

  11. PERFORMANCE MEASUREMENTS OF FEATURE TRACKING AND HISTOGRAM BASED TRAFFIC CONGESTION ALGORITHMS

    Directory of Open Access Journals (Sweden)

    Ozgur Altun

    2015-05-01

    Full Text Available In this paper, feature tracking based and histogram based traffic congestion detection systems are developed. Developed all system are designed to run as real time application. In this work, ORB (Oriented FAST and Rotated BRIEF feature extraction method have been used to develop feature tracking based traffic congestion solution. ORB is a rotation invariant, fast and resistant to noise method and contains the power of FAST and BRIEF feature extraction methods. Also, two different approaches, which are standard deviation and weighed average, have been applied to find out the congestion information by using histogram of the image to develop histogram based traffic congestion solution. Both systems have been tested on different weather conditions such as cloudy, sunny and rainy to provide various illumination at both daytime and night. For all developed systems performance results are examined to show the advantages and drawbacks of these systems

  12. Desempenho agronômico das videiras 'Crimson Seedless' e 'Superior Seedless' no norte de Minas Gerais Agronomic performance of 'Crimson Seedless' and 'Superior Seedless' vines in the north region of Minas Gerais

    Directory of Open Access Journals (Sweden)

    Nelson Pires Feldberg

    2007-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a influência do vigor dos porta-enxertos '1103 Paulsen' e 'IAC-572 Jales', no desempenho agronômico das cultivares Crimson Seedless e Superior Seedless. O experimento foi realizado na Fazenda Experimental da Epamig, em Mocambinho, distrito de Jaíba, MG, em delineamento inteiramente casualizado com sete repetições em esquema fatorial 2x2. Foram analisadas a fertilidade de gemas, o número e a massa de cachos e a massa de ramos. O porta-enxerto '1103 Paulsen' proporcionou os melhores resultados nas cultivares Crimson Seedless e Superior Seedless quanto à massa e número de cachos por planta e fertilidade de gemas, com produtividade média de 31,9 e 22,4 t ha-1 ano-1 , respectivamente. O porta-enxerto 'IAC-572 Jales' proporcionou maior vigor, com maior massa de ramos por planta nas duas cultivares. O porta-enxerto '1103 Paulsen' induziu a maiores fertilidade de gemas e produtividades em 'Crimson Seedless' e 'Superior Seedless' e pode ser indicado para o cultivo na região de Jaíba, MG.The objective of this work was to study the influence of the '1103 Paulsen' and 'IAC-572 Jales' rootstocks vigor in the agronomic performance of the cultivars 'Crimson Seedless' and 'Superior Seedless'. The experiment was carried in the Epamig Experimental Farm located in Mocambinho, Jaíba, MG, Brazil, in completely randomized experimental design with seven replications in factorial 2x2. The following variables were studied: bud fertility, number and weight of clusters and cane weight. The '1103 Paulsen' rootstock showed better results for cultivars 'Crimson Seedless' and 'Superior Seedless' regarding the number of clusters and their weight by plant and bud fertility, with average productivity of 31.9 and 22.4 t ha-1 year-1 , respectively. The 'IAC-572 Jales' rootstock provided higher vigor, comprising greater weight of canes per plant in both cultivars. The '1103 Paulsen' rootstock induced higher bud fertility and

  13. Performance Prediction of the NCAT Test Track Pavements Using Mechanistic Models

    Science.gov (United States)

    LaCroix, Andrew Thomas

    In the pavement industry in the United States of America, there is an increasing desire to improve the pavement construction quality and life for new and rehabilitated pavements. In order to improve the quality of the pavements, the Federal Highway Administration (FHWA) has pursued a performance-related specification (PRS) for over 20 years. The goal of PRS is to provide material and construction (M/C) properties that correlate well with pavement performance. In order to improve upon the PRS projects developed in WesTrack (NCHRP 9-20) and the MEPDG-based PRS (NCHRP 9-22), a set of PRS tests and models are proposed to provide a critical link between pavement performance and M/C properties. The PRS testing is done using the asphalt mixture performance tester (AMPT). The proposed PRS focuses on rutting and fatigue cracking of asphalt mixtures. The mixtures are characterized for their stiffness, fatigue behavior, and rutting resistance using a dynamic modulus (|E*|) test, a fatigue test, and a triaxial stress sweep (TSS) test, respectively. Information from the fatigue test characterizes the simplified viscoelastic continuum damage (S-VECD) model. Once the stiffness is reduced to a certain level, the material develops macro-cracks and fails. The TSS test is used to characterize a viscoplastic (VP) model. The VP model allows the prediction of the rut depth beneath the center of the wheel. The VECD and VP models are used within a layered viscoelastic (LVE) pavement model to predict fatigue and rutting performance of pavements. The PRS is evaluated by comparing the predictions to the field performance at the NCAT pavement test track in Opelika, Alabama. The test track sections evaluated are part of the 2009 test cycle group experiment, which focused on WMA, high RAP (50%), and a combination of both. The fatigue evaluation shows that all sections would last at least 18 years at the same traffic rate. The sections do not show any cracking, suggesting the sections are well

  14. Improvement of the CMS Muon Reconstruction Performance due to Precise Track-based Alignment

    Science.gov (United States)

    Brown, Malachi

    2017-01-01

    The performance of the CMS muon system depends on a precise knowledge of the positions and orientations of all its elements. The muon tracks reconstructed in proton-proton collision data at the LHC are used to align the individual muon detectors with respect to the inner silicon tracker. The alignment procedure measures these positions and provides geometries of the muon system that must be validated to ensure the performance of the detectors. In this report we present a set of sophisticated validation tools, developed to test the accuracy of a given muon system geometry with data from collisions. The validation procedure uses events with pairs of muons from Z-boson decays and events with very high pT muons, in order to quantify the reconstruction performance of the muon system for a given geometry. Kinematic properties of muons reconstructed using information from the muon system are compared to the properties of muons built using information from the tracker. We demonstrate improvements of the muon reconstruction performance after track-based alignment procedures are performed with 2016 data.

  15. Validity of Treadmill-Derived Critical Speed on Predicting 5000-Meter Track-Running Performance.

    Science.gov (United States)

    Nimmerichter, Alfred; Novak, Nina; Triska, Christoph; Prinz, Bernhard; Breese, Brynmor C

    2017-03-01

    Nimmerichter, A, Novak, N, Triska, C, Prinz, B, and Breese, BC. Validity of treadmill-derived critical speed on predicting 5,000-meter track-running performance. J Strength Cond Res 31(3): 706-714, 2017-To evaluate 3 models of critical speed (CS) for the prediction of 5,000-m running performance, 16 trained athletes completed an incremental test on a treadmill to determine maximal aerobic speed (MAS) and 3 randomly ordered runs to exhaustion at the [INCREMENT]70% intensity, at 110% and 98% of MAS. Critical speed and the distance covered above CS (D') were calculated using the hyperbolic speed-time (HYP), the linear distance-time (LIN), and the linear speed inverse-time model (INV). Five thousand meter performance was determined on a 400-m running track. Individual predictions of 5,000-m running time (t = [5,000-D']/CS) and speed (s = D'/t + CS) were calculated across the 3 models in addition to multiple regression analyses. Prediction accuracy was assessed with the standard error of estimate (SEE) from linear regression analysis and the mean difference expressed in units of measurement and coefficient of variation (%). Five thousand meter running performance (speed: 4.29 ± 0.39 m·s; time: 1,176 ± 117 seconds) was significantly better than the predictions from all 3 models (p distances of 5,000 m.

  16. Performance of the ATLAS Track Reconstruction Algorithms in Dense Environments in LHC run 2

    CERN Document Server

    Aaboud, Morad; ATLAS Collaboration; Abbott, Brad; Abdallah, Jalal; Abdinov, Ovsat; Abeloos, Baptiste; Abidi, Syed Haider; AbouZeid, Ossama; Abraham, Nicola; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adachi, Shunsuke; Adamczyk, Leszek; Adelman, Jahred; Adersberger, Michael; Adye, Tim; Affolder, Tony; Agatonovic-Jovin, Tatjana; Agheorghiesei, Catalin; Aguilar-Saavedra, Juan Antonio; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akatsuka, Shunichi; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albicocco, Pietro; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexopoulos, Theodoros; Alhroob, Muhammad; Ali, Babar; Aliev, Malik; Alimonti, Gianluca; Alison, John; Alkire, Steven Patrick; Allbrooke, Benedict; Allen, Benjamin William; Allport, Phillip; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Alshehri, Azzah Aziz; Alstaty, Mahmoud; Alvarez Gonzalez, Barbara; Άlvarez Piqueras, Damián; Alviggi, Mariagrazia; Amadio, Brian Thomas; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, John Kenneth; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Angelidakis, Stylianos; Angelozzi, Ivan; Angerami, Aaron; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antel, Claire; Antonelli, Mario; Antonov, Alexey; Antrim, Daniel Joseph; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Arabidze, Giorgi; Arai, Yasuo; Araque, Juan Pedro; Araujo Ferraz, Victor; Arce, Ayana; Ardell, Rose Elisabeth; Arduh, Francisco Anuar; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Armitage, Lewis James; Arnaez, Olivier; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Artz, Sebastian; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Augsten, Kamil; Avolio, Giuseppe; Axen, Bradley; Ayoub, Mohamad Kassem; Azuelos, Georges; Baas, Alessandra; Baca, Matthew John; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Bagnaia, Paolo; Bahrasemani, Sina; Baines, John; Bajic, Milena; Baker, Oliver Keith; Baldin, Evgenii; Balek, Petr; Balli, Fabrice; Balunas, William Keaton; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Barak, Liron; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barisits, Martin-Stefan; Barklow, Timothy; Barlow, Nick; Barnes, Sarah Louise; Barnett, Bruce; Barnett, Michael; Barnovska-Blenessy, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barranco Navarro, Laura; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Basalaev, Artem; Bassalat, Ahmed; Bates, Richard; Batista, Santiago Juan; Batley, Richard; Battaglia, Marco; Bauce, Matteo; Bauer, Florian; Bawa, Harinder Singh; Beacham, James; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Bechtle, Philip; Beck, Hans~Peter; Becker, Kathrin; Becker, Maurice; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bednyakov, Vadim; Bedognetti, Matteo; Bee, Christopher; Beermann, Thomas; Begalli, Marcia; Begel, Michael; Behr, Janna Katharina; Bell, Andrew Stuart; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Belyaev, Nikita; Benary, Odette; Benchekroun, Driss; Bender, Michael; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez, Jose; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Bentvelsen, Stan; Beresford, Lydia; Beretta, Matteo; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Beringer, Jürg; Berlendis, Simon; Bernard, Nathan Rogers; Bernardi, Gregorio; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertram, Iain Alexander; Bertsche, Carolyn; Bertsche, David; Besjes, Geert-Jan; Bessidskaia Bylund, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethani, Agni; Bethke, Siegfried; Bevan, Adrian John; Beyer, Julien-christopher; Bianchi, Riccardo-Maria; Biebel, Otmar; Biedermann, Dustin; Bielski, Rafal; Biesuz, Nicolo Vladi; Biglietti, Michela

    2017-01-01

    Abstract: With the increase in energy of the Large Hadron Collider to a centre-of-mass energy of 13 TeV for Run 2, events with dense environments, such as in the cores of high-energy jets, became a focus for new physics searches as well as measurements of the Standard Model. These environments are characterized by charged-particle separations of the order of the tracking detectors sensor granularity. Basic track quantities are compared between 3.2 fb$^{-1}$ of data collected by the ATLAS experiment and simulation of proton-proton collisions producing high-transverse-momentum jets at a centre-of-mass energy of 13 TeV. The impact of charged-particle separations and multiplicities on the track reconstruction performance is discussed. The efficiency in the cores of jets with transverse momenta between 200 GeV and 1600 GeV is quantified using a novel, data-driven, method. The method uses the energy loss, dE/dx, to identify pixel clusters originating from two charged particles. Of the charged particles creating the...

  17. Performance evaluation of a prototype module for the CBM Silicon Tracking System

    Energy Technology Data Exchange (ETDEWEB)

    Balog, Tomas [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Comenius University, Bratislava (Slovakia)

    2013-07-01

    The building block of the CBM Silicon Tracking System is a detector module, a functional unit of one or several daisy-chained double-sided silicon microstrip sensors, read-out cables and front-end electronics. Ten modules will be located on a detector ladder. Several ladders build up a STS tracking station. The performance of first prototype modules has been evaluated, resembling the structure of the intended STS module. The prototypes comprise a full-size CBM01 sensor and two 128-channel read-out cables 10, 20 and 30 cm long attached to the read-out pads on either side of the sensor. The cables end in connector boards interfacing to two front-end boards each hosting one n-XYTER chip. The whole setup was mounted into a copper box used as a shield. The hit reconstruction and track finding in the STS requires thresholds to be set at maximum value of 4 ke{sup -}. The presentation discusses the noise determined for all three prototype modules and the signal-to-noise ratio obtained when testing the systems with a {sup 241}Am gamma source.

  18. Smooth pursuit detection in binocular eye-tracking data with automatic video-based performance evaluation.

    Science.gov (United States)

    Larsson, Linnéa; Nyström, Marcus; Ardö, Håkan; Åström, Kalle; Stridh, Martin

    2016-12-01

    An increasing number of researchers record binocular eye-tracking signals from participants viewing moving stimuli, but the majority of event-detection algorithms are monocular and do not consider smooth pursuit movements. The purposes of the present study are to develop an algorithm that discriminates between fixations and smooth pursuit movements in binocular eye-tracking signals and to evaluate its performance using an automated video-based strategy. The proposed algorithm uses a clustering approach that takes both spatial and temporal aspects of the binocular eye-tracking signal into account, and is evaluated using a novel video-based evaluation strategy based on automatically detected moving objects in the video stimuli. The binocular algorithm detects 98% of fixations in image stimuli compared to 95% when only one eye is used, while for video stimuli, both the binocular and monocular algorithms detect around 40% of smooth pursuit movements. The present article shows that using binocular information for discrimination of fixations and smooth pursuit movements is advantageous in static stimuli, without impairing the algorithm's ability to detect smooth pursuit movements in video and moving-dot stimuli. With an automated evaluation strategy, time-consuming manual annotations are avoided and a larger amount of data can be used in the evaluation process.

  19. The ALICE Inner Tracking System: Design, physics performance and R&D issues

    Energy Technology Data Exchange (ETDEWEB)

    Giubellino, P. [IXFN, Torino (Italy)

    1995-07-15

    ALICE is a dedicated Heavy-Ion experiment proposed for the future LHC collider at CERN. The main goals of the ALICE Inner Tracking System are the reconstruction of secondary vertexes and the tracking and identification of low-p{sub t} electrons; at the same time, it will provide a significant improvement of the momentum resolution at large p{sub t} and the tracking and identification of low-p{sub t} hadrons. The ITS will consist of five cilindrical layers of radii from 7.5 to 50 cm. of high-resolution detectors. The unprecedented particle density foreseen, of up to 8000 particles per unit {eta}, imposes the use of sophisticated, and often innovative, technologies for the detectors, the electronics and the support and cooling system. Therefore, extensive R&D programs are now being pursued on various aspects of the project. Here are presented the basic ideas for the design, a few examples of the expected performance, and a brief overview of the ongoing R&D.

  20. Covalently coupled hybrid of graphitic carbon nitride with reduced graphene oxide as a superior performance lithium-ion battery anode.

    Science.gov (United States)

    Fu, Yongsheng; Zhu, Junwu; Hu, Chong; Wu, Xiaodong; Wang, Xin

    2014-11-01

    An in situ chemical synthetic approach has been designed for the fabrication of a covalently coupled hybrid consisting of graphitic carbon nitride (g-C3N4) with reduced graphene oxide (rGO) with differing g-C3N4/rGO ratio. The epoxy groups of graphene oxide (GO) undergo a nucleophilic substitution reaction with dicyandiamide (C2H4N4) to form the C2H4N4-GO composite via a covalent C-N bond, and then both the in situ polymerization of C2H4N4 and the thermal reduction of GO can be achieved at higher temperatures, forming the covalently coupled g-C3N4-rGO. FT-IR, CP-MAS NMR and XPS analyses, clearly revealed a covalent interaction between the g-C3N4 and rGO sheets. The g-C3N4-rGO exhibits an unprecedented high, stable and reversible capacity of 1525 mA h g(-1) at a current density of 100 mA g(-1) after 50 cycles. Even at a large current density of 1000 mA g(-1), a reversible capacity of 943 mA h g(-1) can still be retained. The superior electrochemical performance of g-C3N4-rGO is attributed to the specific characteristics of the unique nanostructure of g-C3N4-rGO and the concerted effects of g-C3N4 and rGO, including covalent interactions between the two moieties, the good conductivity and high special surface area of the nanocomposite, as well as the template effect of the planar amino group of g-C3N4 for the dispersed decoration of Li(+) ions.

  1. Exploring Game Performance in the National Basketball Association Using Player Tracking Data.

    Directory of Open Access Journals (Sweden)

    Jaime Sampaio

    Full Text Available Recent player tracking technology provides new information about basketball game performance. The aim of this study was to (i compare the game performances of all-star and non all-star basketball players from the National Basketball Association (NBA, and (ii describe the different basketball game performance profiles based on the different game roles. Archival data were obtained from all 2013-2014 regular season games (n = 1230. The variables analyzed included the points per game, minutes played and the game actions recorded by the player tracking system. To accomplish the first aim, the performance per minute of play was analyzed using a descriptive discriminant analysis to identify which variables best predict the all-star and non all-star playing categories. The all-star players showed slower velocities in defense and performed better in elbow touches, defensive rebounds, close touches, close points and pull-up points, possibly due to optimized attention processes that are key for perceiving the required appropriate environmental information. The second aim was addressed using a k-means cluster analysis, with the aim of creating maximal different performance profile groupings. Afterwards, a descriptive discriminant analysis identified which variables best predict the different playing clusters. The results identified different playing profile of performers, particularly related to the game roles of scoring, passing, defensive and all-round game behavior. Coaching staffs may apply this information to different players, while accounting for individual differences and functional variability, to optimize practice planning and, consequently, the game performances of individuals and teams.

  2. Exploring Game Performance in the National Basketball Association Using Player Tracking Data

    Science.gov (United States)

    Calleja-González, Julio; Jiménez Sáiz, Sergio; Schelling i del Alcázar, Xavi; Balciunas, Mindaugas

    2015-01-01

    Recent player tracking technology provides new information about basketball game performance. The aim of this study was to (i) compare the game performances of all-star and non all-star basketball players from the National Basketball Association (NBA), and (ii) describe the different basketball game performance profiles based on the different game roles. Archival data were obtained from all 2013-2014 regular season games (n = 1230). The variables analyzed included the points per game, minutes played and the game actions recorded by the player tracking system. To accomplish the first aim, the performance per minute of play was analyzed using a descriptive discriminant analysis to identify which variables best predict the all-star and non all-star playing categories. The all-star players showed slower velocities in defense and performed better in elbow touches, defensive rebounds, close touches, close points and pull-up points, possibly due to optimized attention processes that are key for perceiving the required appropriate environmental information. The second aim was addressed using a k-means cluster analysis, with the aim of creating maximal different performance profile groupings. Afterwards, a descriptive discriminant analysis identified which variables best predict the different playing clusters. The results identified different playing profile of performers, particularly related to the game roles of scoring, passing, defensive and all-round game behavior. Coaching staffs may apply this information to different players, while accounting for individual differences and functional variability, to optimize practice planning and, consequently, the game performances of individuals and teams. PMID:26171606

  3. Exploring Game Performance in the National Basketball Association Using Player Tracking Data.

    Science.gov (United States)

    Sampaio, Jaime; McGarry, Tim; Calleja-González, Julio; Jiménez Sáiz, Sergio; Schelling I Del Alcázar, Xavi; Balciunas, Mindaugas

    2015-01-01

    Recent player tracking technology provides new information about basketball game performance. The aim of this study was to (i) compare the game performances of all-star and non all-star basketball players from the National Basketball Association (NBA), and (ii) describe the different basketball game performance profiles based on the different game roles. Archival data were obtained from all 2013-2014 regular season games (n = 1230). The variables analyzed included the points per game, minutes played and the game actions recorded by the player tracking system. To accomplish the first aim, the performance per minute of play was analyzed using a descriptive discriminant analysis to identify which variables best predict the all-star and non all-star playing categories. The all-star players showed slower velocities in defense and performed better in elbow touches, defensive rebounds, close touches, close points and pull-up points, possibly due to optimized attention processes that are key for perceiving the required appropriate environmental information. The second aim was addressed using a k-means cluster analysis, with the aim of creating maximal different performance profile groupings. Afterwards, a descriptive discriminant analysis identified which variables best predict the different playing clusters. The results identified different playing profile of performers, particularly related to the game roles of scoring, passing, defensive and all-round game behavior. Coaching staffs may apply this information to different players, while accounting for individual differences and functional variability, to optimize practice planning and, consequently, the game performances of individuals and teams.

  4. Performance of passive target tracking using bearing-frequency and bearings of multiple arrays

    Institute of Scientific and Technical Information of China (English)

    DU Xuanmin; YAO Lan

    2002-01-01

    Two target motion analysis (TMA) methods using multi-dimension information are studied, one is TMA with bearing-frequency and the other is TMA with multiple arrays. The optimization algorithm combining Gauss-Newton (G-N) method with Levenberg-Marquardt(LM) method is applied to analyze the performance of target tracking with maximum likelihood estimation(MLE), and Monte Carlo experiments are presented. The results show that although the TMA with multi-dimension information have eliminated the maneuvers needed by conventional bearing-only TMA, but the application are not of universality.

  5. Tracking error constrained robust adaptive neural prescribed performance control for flexible hypersonic flight vehicle

    Directory of Open Access Journals (Sweden)

    Zhonghua Wu

    2017-02-01

    Full Text Available A robust adaptive neural control scheme based on a back-stepping technique is developed for the longitudinal dynamics of a flexible hypersonic flight vehicle, which is able to ensure the state tracking error being confined in the prescribed bounds, in spite of the existing model uncertainties and actuator constraints. Minimal learning parameter technique–based neural networks are used to estimate the model uncertainties; thus, the amount of online updated parameters is largely lessened, and the prior information of the aerodynamic parameters is dispensable. With the utilization of an assistant compensation system, the problem of actuator constraint is overcome. By combining the prescribed performance function and sliding mode differentiator into the neural back-stepping control design procedure, a composite state tracking error constrained adaptive neural control approach is presented, and a new type of adaptive law is constructed. As compared with other adaptive neural control designs for hypersonic flight vehicle, the proposed composite control scheme exhibits not only low-computation property but also strong robustness. Finally, two comparative simulations are performed to demonstrate the robustness of this neural prescribed performance controller.

  6. High Performance Motion Trajectory Tracking Control of Pneumatic Cylinders: A Comparison of Some Nonlinear Control Algorithms

    Directory of Open Access Journals (Sweden)

    Deyuan Meng

    2014-05-01

    Full Text Available The dynamics of pneumatic systems are highly nonlinear, and there normally exists a large extent of model uncertainties; the precision motion trajectory tracking control of pneumatic cylinders is still a challenge. In this paper, two typical nonlinear controllers—adaptive controller and deterministic robust controller—are constructed firstly. Considering that they have both benefits and limitations, an adaptive robust controller (ARC is further proposed. The ARC is a combination of the first two controllers; it employs online recursive least squares estimation (RLSE to reduce the extent of parametric uncertainties, and utilizes the robust control method to attenuate the effects of parameter estimation errors, unmodeled dynamics, and disturbances. In order to solve the conflicts between the robust control design and the parameter adaption law design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Theoretically, ARC possesses the advantages of the adaptive control and the deterministic robust control, and thus an even better tracking performance can be expected. Extensive comparative experimental results are presented to illustrate the achievable performance of the three proposed controllers and their performance robustness to the parameter variations and sudden disturbance.

  7. Real-time catheter tracking for high-dose-rate prostate brachytherapy using an electromagnetic 3D-guidance device: A preliminary performance study

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Jun; Sebastian, Evelyn; Mangona, Victor; Yan Di [Department of Radiation Oncology, William Beaumont Hospital, Royal Oak, Michigan 48073 (United States)

    2013-02-15

    Purpose: In order to increase the accuracy and speed of catheter reconstruction in a high-dose-rate (HDR) prostate implant procedure, an automatic tracking system has been developed using an electromagnetic (EM) device (trakSTAR, Ascension Technology, VT). The performance of the system, including the accuracy and noise level with various tracking parameters and conditions, were investigated. Methods: A direct current (dc) EM transmitter (midrange model) and a sensor with diameter of 1.3 mm (Model 130) were used in the trakSTAR system for tracking catheter position during HDR prostate brachytherapy. Localization accuracy was assessed under both static and dynamic analyses conditions. For the static analysis, a calibration phantom was used to investigate error dependency on operating room (OR) table height (bottom vs midposition vs top), sensor position (distal tip of catheter vs connector end of catheter), direction [left-right (LR) vs anterior-posterior (AP) vs superior-inferior (SI)], sampling frequency (40 vs 80 vs 120 Hz), and interference from OR equipment (present vs absent). The mean and standard deviation of the localization offset in each direction and the corresponding error vectors were calculated. For dynamic analysis, the paths of five straight catheters were tracked to study the effects of directions, sampling frequency, and interference of EM field. Statistical analysis was conducted to compare the results in different configurations. Results: When interference was present in the static analysis, the error vectors were significantly higher at the top table position (3.3 {+-} 1.3 vs 1.8 {+-} 0.9 mm at bottom and 1.7 {+-} 1.0 mm at middle, p < 0.001), at catheter end position (3.1 {+-} 1.1 vs 1.4 {+-} 0.7 mm at the tip position, p < 0.001), and at 40 Hz sampling frequency (2.6 {+-} 1.1 vs 2.4 {+-} 1.5 mm at 80 Hz and 1.8 {+-} 1.1 at 160 Hz, p < 0.001). So did the mean offset errors in the LR direction (-1.7 {+-} 1.4 vs 0.4 {+-} 0.5 mm in AP and 0

  8. GNSS Signal Tracking Performance Improvement for Highly Dynamic Receivers by Gyroscopic Mounting Crystal Oscillator.

    Science.gov (United States)

    Abedi, Maryam; Jin, Tian; Sun, Kewen

    2015-08-31

    In this paper, the efficiency of the gyroscopic mounting method is studied for a highly dynamic GNSS receiver's reference oscillator for reducing signal loss. Analyses are performed separately in two phases, atmospheric and upper atmospheric flights. Results show that the proposed mounting reduces signal loss, especially in parts of the trajectory where its probability is the highest. This reduction effect appears especially for crystal oscillators with a low elevation angle g-sensitivity vector. The gyroscopic mounting influences frequency deviation or jitter caused by dynamic loads on replica carrier and affects the frequency locked loop (FLL) as the dominant tracking loop in highly dynamic GNSS receivers. In terms of steady-state load, the proposed mounting mostly reduces the frequency deviation below the one-sigma threshold of FLL (1σ(FLL)). The mounting method can also reduce the frequency jitter caused by sinusoidal vibrations and reduces the probability of signal loss in parts of the trajectory where the other error sources accompany this vibration load. In the case of random vibration, which is the main disturbance source of FLL, gyroscopic mounting is even able to suppress the disturbances greater than the three-sigma threshold of FLL (3σ(FLL)). In this way, signal tracking performance can be improved by the gyroscopic mounting method for highly dynamic GNSS receivers.

  9. Tracking performance of upgraded "polished panel" optical receiver on NASA's 34 meter research antenna

    Science.gov (United States)

    Vilnrotter, V.

    There has been considerable interest in developing and demonstrating a hybrid “ polished panel” optical receiver concept that would replace the microwave panels on the Deep Space Network's (DSN) 34 meter antennas with highly polished aluminum panels, thus enabling simultaneous optical and microwave reception1. A test setup has been installed on the 34 meter research antenna at DSS-13 (Deep Space Station 13) at NASA's Goldstone Deep Space Communications Complex in California in order to assess the feasibility of this concept. Here we describe the results of a recent effort to dramatically reduce the dimensions of the point-spread function (PSF) generated by a custom polished panel, thus enabling improved optical communications performance. The latest results are compared to the previous configuration in terms of quantifiable PSF improvement. In addition, the performance of acquisition and tracking algorithms designed specifically for the polished panel PSF are evaluated and compared, based on data obtained from real-time tracking of planets and bright stars with the 34 meter research antenna at DSS-13.

  10. Tracking Performance of Upgraded "Polished Panel" Optical Receiver on NASA's 34 Meter Research Antenna

    Science.gov (United States)

    Vilnrotter, Victor

    2013-01-01

    There has been considerable interest in developing and demonstrating a hybrid "polished panel" optical receiver concept that would replace the microwave panels on the Deep Space Network's (DSN) 34 meter antennas with highly polished aluminum panels, thus enabling simultaneous opticaland microwave reception. A test setup has been installed on the 34 meter research antenna at DSS-13 (Deep Space Station 13) at NASA's Goldstone Deep Space Communications Complex in California in order to assess the feasibility of this concept. Here we describe the results of a recent effort todramatically reduce the dimensions of the point-spread function (PSF) generated by a custom polished panel, thus enabling improved optical communications performance. The latest results are compared to the previous configuration in terms of quantifiable PSF improvement. In addition, the performance of acquisition and tracking algorithms designed specifically for the polished panel PSF are evaluated and compared, based on data obtained from real-time tracking of planets and bright stars with the 34 meter research antenna at DSS-13.

  11. Dynamic tracking performance of indoor global positioning system: An experimental and theoretical study

    Directory of Open Access Journals (Sweden)

    Gang Zhao

    2015-10-01

    Full Text Available The automation level has been improved rapidly with the introduction of large-scale measurement technologies, such as indoor global positioning system, into the production process among the fields of car, ship, and aerospace due to their excellent measurement characteristics. In fact, the objects are usually in motion during the real measurement process; however, the dynamic measurement characteristics of indoor global positioning system are much limited and still in exploration. In this research, we focused on the dynamic tracking performance of indoor global positioning system and then successfully built a mathematical model based on its measurement principles. We first built single and double station system models with the consideration of measurement objects’ movement. Using MATLAB simulation, we realized the dynamic measurement characteristics of indoor global positioning system. In the real measurement process, the experimental results also support the mathematical model that we built, which proves a great success in dynamic measurement characteristics. We envision that this dynamic tracking performance of indoor global positioning system would shed light on the dynamic measurement of a motion object and therefore make contribution to the automation production.

  12. Tracking Performance of Upgraded "Polished Panel" Optical Receiver on NASA's 34 Meter Research Antenna

    Science.gov (United States)

    Vilnrotter, Victor

    2013-01-01

    There has been considerable interest in developing and demonstrating a hybrid "polished panel" optical receiver concept that would replace the microwave panels on the Deep Space Network's (DSN) 34 meter antennas with highly polished aluminum panels, thus enabling simultaneous opticaland microwave reception. A test setup has been installed on the 34 meter research antenna at DSS-13 (Deep Space Station 13) at NASA's Goldstone Deep Space Communications Complex in California in order to assess the feasibility of this concept. Here we describe the results of a recent effort todramatically reduce the dimensions of the point-spread function (PSF) generated by a custom polished panel, thus enabling improved optical communications performance. The latest results are compared to the previous configuration in terms of quantifiable PSF improvement. In addition, the performance of acquisition and tracking algorithms designed specifically for the polished panel PSF are evaluated and compared, based on data obtained from real-time tracking of planets and bright stars with the 34 meter research antenna at DSS-13.

  13. IEEE 802.11p Empirical Performance Model from Evaluations on Test Tracks

    Directory of Open Access Journals (Sweden)

    Sébastien Demmel

    2014-06-01

    Full Text Available IEEE 802.11p is the new standard for intervehicular communications (IVC using the 5.9 GHz frequency band; it is planned to be widely deployed to enable cooperative systems. 802.11p uses and performance have been studied theoretically and in simulations over the past years. Unfortunately, many of these results have not been confirmed by on-tracks experimentation. In this paper, we describe field trials of 802.11p technology with our test vehicles; metrics such as maximum range, latency and frame loss are examined. Then, we propose a detailed modelisation of 802.11p that can be used to accurately simulate its performance within Cooperative Systems (CS applications.

  14. A High Performance Track and Hold Circuit for High-Resolution High-Speed ADC

    Institute of Scientific and Technical Information of China (English)

    Hua Cai; Ping Li

    2011-01-01

    Design of a high performance track and hold (T/H) circuit for high-resolution high-speed analog-to-digital converter (ADC) is presented,which has been implemented in 0.18 μm CMOS process.An improved bootstrapped and bulk-switching technique is introduced to greatly minimize the nonlinearity of sampling network over a wide bandwidth,and the addition of a modified pre-charge circuit helps reducing the total power consumption.The experimental results show that the proposed T/H circuit achieves over 77 dB SFDR (spurious-free dynamic range) and 70 dB THD (total harmonic distortion) at 100 MHz sampling rate and maintains the performance with input frequency up to 305 MHz while consuming 47 mW power.

  15. Design and Performance Evaluation of a UWB Communication and Tracking System for Mini-AERCam

    Science.gov (United States)

    Barton, Richard J.

    2005-01-01

    NASA Johnson Space Center (JSC) is developing a low-volume, low-mass, robotic free-flying camera known as Mini-AERCam (Autonomous Extra-vehicular Robotic Camera) to assist the International Space Station (ISS) operations. Mini-AERCam is designed to provide astronauts and ground control real-time video for camera views of ISS. The system will assist ISS crewmembers and ground personnel to monitor ongoing operations and perform visual inspections of exterior ISS components without requiring extravehicular activity (EAV). Mini-AERCam consists of a great number of subsystems. Many institutions and companies have been involved in the R&D for this project. A Mini-AERCam ground control system has been studied at Texas A&M University [3]. The path planning and control algorithms that direct the motions of Mini-AERCam have been developed through the joint effort of Carnegie Mellon University and the Texas Robotics and Automation Center [5]. NASA JSC has designed a layered control architecture that integrates all functions of Mini-AERCam [8]. The research described in this report is part of a larger effort focused on the communication and tracking subsystem that is designed to perform three major tasks: 1. To transmit commands from ISS to Mini-AERCam for control of robotic camera motions (downlink); 2. To transmit real-time video from Mini-AERCam to ISS for inspections (uplink); 3. To track the position of Mini-AERCam for precise motion control. The ISS propagation environment is unique due to the nature of the ISS structure and multiple RF interference sources [9]. The ISS is composed of various truss segments, solar panels, thermal radiator panels, and modules for laboratories and crew accommodations. A tracking system supplemental to GPS is desirable both to improve accuracy and to eliminate the structural blockage due to the close proximity of the ISS which could at times limit the number of GPS satellites accessible to the Mini-AERCam. Ideally, the tracking system will

  16. Performance analysis of a new positron camera geometry for high speed, fine particle tracking

    Science.gov (United States)

    Sovechles, J. M.; Boucher, D.; Pax, R.; Leadbeater, T.; Sasmito, A. P.; Waters, K. E.

    2017-09-01

    A new positron camera arrangement was assembled using 16 ECAT951 modular detector blocks. A closely packed, cross pattern arrangement was selected to produce a highly sensitive cylindrical region for tracking particles with low activities and high speeds. To determine the capabilities of this system a comprehensive analysis of the tracking performance was conducted to determine the 3D location error and location frequency as a function of tracer activity and speed. The 3D error was found to range from 0.54 mm for a stationary particle, consistent for all tracer activities, up to 4.33 mm for a tracer with an activity of 3 MBq and a speed of 4 m · s-1. For lower activity tracers (sensitive to increases in speed, increasing to 28 mm (at 4 m · s-1), indicating that at these conditions a reliable trajectory is not possible. These results expanded on, but correlated well with, previous literature that only contained location errors for tracer speeds up to 1.5 m · s-1. The camera was also used to track directly activated mineral particles inside a two-inch hydrocyclone and a 142 mm diameter flotation cell. A detailed trajectory, inside the hydrocyclone, of a  -212  +  106 µm (10-1 MBq) quartz particle displayed the expected spiralling motion towards the apex. This was the first time a mineral particle of this size had been successfully traced within a hydrocyclone, however more work is required to develop detailed velocity fields.

  17. Tracking Performance in High Multiplicity Environment for the CLIC ILD Detector

    CERN Document Server

    Killenberg, M

    2012-01-01

    We report on the tracking efficiency and the fraction of badly reconstructed tracks in the CLIC ILD detector for high multiplicity events (tt ̄@3 TeV) with and without the presence of γγ →hadrons background. They have been studied for the silicon tracking, the TPC tracking and the so called FullLDC tacking, which combines silicon and TPC measurements.

  18. Cognitive effort in direct and inverse translation performance: Insight from eye-tracking technology

    Directory of Open Access Journals (Sweden)

    Aline Ferreira

    2016-09-01

    Full Text Available http://dx.doi.org/10.5007/2175-7968.2016v36n3p60 This case study examined the translation performance of four professional translators with the aim of exploring the cognitive effort involved in direct and inverse translation. Four professional translators translated two comparable texts from English into Spanish and from Spanish into English. Eye-tracking technology was used to analyze the total time spent in each task, fixation time, and average fixation time. Fixation count in three areas of interest was measured including: source text, target text, and browser, used as an external support. Results suggested that although total time and fixation count were indicators of cognitive effort during the tasks, fixation count in the areas of interest data showed that more effort was directed toward the source text in both tasks. Overall, this study demonstrates that while more traditional measures for translation difficulty (e.g., total time indicate more effort in the inverse translation task, eye-tracking data indicate that differences in the effort applied in both directions must be carefully analyzed, mostly regarding the areas of interest.

  19. Performance analysis of a modified moving shadow elimination method developed for indoor scene activity tracking

    Science.gov (United States)

    Mitra, Bhargav Kumar; Fiaz, Muhammad Kamran; Kypraios, Ioannis; Birch, Philip; Young, Rupert; Chatwin, Chris

    2008-10-01

    Moving shadow detection is an important step in automated robust surveillance systems in which a dynamic object is to be segmented and tracked. Rejection of the shadow region significantly reduces the erroneous tracking of non-target objects within the scene. A method to eliminate such shadows in indoor video sequences has been developed by the authors. The objective has been met through the use of a pixel-wise shadow search process that utilizes a computational model in the RGB colour space to demarcate the moving shadow regions from the background scene and the foreground objects. However, it has been observed that the robustness and efficiency of the method can be significantly enhanced through the deployment of a binary-mask based shadow search process. This, in turn, calls for the use of a prior foreground object segmentation technique. The authors have also automated a standard foreground object segmentation technique through the deployment of some popular statistical outlier-detection based strategies. The paper analyses the performance i.e. the effectiveness as a shadow detector, discrimination potential, and the processing time of the modified moving shadow elimination method on the basis of some standard evaluation metrics.

  20. Modeling and Performance Prediction of Induction Motor Drive System for Electric Drive Tracked Vehicles

    Institute of Scientific and Technical Information of China (English)

    CHEN Shu-yong; CHEN Quan-shi; SUN Feng-chun

    2007-01-01

    The principle of rotor flux-orientation vector control on 100/150 kW three-phase AC induction motor for electric drive tracked vehicles is analyzed, and the mathematic model is deduced. The drive system of induction motor is modeled and simulated by Matlab/Simulink. The characteristics of motor and drive system are analyzed and evaluated by practical bench test. The simulation and bench test results show that the model is valid, and the driving control system has constant torque under rated speed, constant torque above rated speed, widely variable speed range and better dynamic characteristics. In order to evaluate the practical applications of high power induction motor driving system in electric drive tracked vehicles, a collaborative simulation based on interface technology of Matlab/Simulink and multi-body dynamic analysis software known as RecurDyn is done, the vehicle performances are predicted in the acceleration time (0-32 km/h) and turning characteristic (v=10 km/h, R=B).

  1. Systematic Tracking of Malaysian Primary School Students’ ESL Reading Comprehension Performance to Facilitate Instructional Processes

    Directory of Open Access Journals (Sweden)

    Lin Siew Eng

    2016-01-01

    Full Text Available This study was conducted to systematically track and benchmark upper primary school students‟ ESL reading comprehension ability and subsequently generate data at the micro and macro levels according to individual achievement, school location, gender and ethnicity at the school, district, state and national levels. The main intention of this initiative was to provide information to assist ESL teachers about their students‟ reading ability and to determine students' reading comprehension performance standards. The auto generated data is expected to facilitate classroom instructional process without necessitating teachers to prepare test materials or manage data of their students‟ reading comprehension track records. The respondents were 1,514 Year 5 students from urban and rural schools from a district in northern Malaysia. The idea was conceptualised through a series of tests and development of the Reading Evaluation and Decoding System (READS for Primary Schools. The findings indicated that majority of the respondents were „below standard‟ and „at academic warning‟. We believe the generated data can assist the Ministry of Education to develop better quality instructional processes that are evidence based with a more focused reading instruction and reading material to tailor to the needs of students.

  2. Performance enhancement for a GPS vector-tracking loop utilizing an adaptive iterated extended Kalman filter.

    Science.gov (United States)

    Chen, Xiyuan; Wang, Xiying; Xu, Yuan

    2014-12-09

    This paper deals with the problem of state estimation for the vector-tracking loop of a software-defined Global Positioning System (GPS) receiver. For a nonlinear system that has the model error and white Gaussian noise, a noise statistics estimator is used to estimate the model error, and based on this, a modified iterated extended Kalman filter (IEKF) named adaptive iterated Kalman filter (AIEKF) is proposed. A vector-tracking GPS receiver utilizing AIEKF is implemented to evaluate the performance of the proposed method. Through road tests, it is shown that the proposed method has an obvious accuracy advantage over the IEKF and Adaptive Extended Kalman filter (AEKF) in position determination. The results show that the proposed method is effective to reduce the root-mean-square error (RMSE) of position (including longitude, latitude and altitude). Comparing with EKF, the position RMSE values of AIEKF are reduced by about 45.1%, 40.9% and 54.6% in the east, north and up directions, respectively. Comparing with IEKF, the position RMSE values of AIEKF are reduced by about 25.7%, 19.3% and 35.7% in the east, north and up directions, respectively. Compared with AEKF, the position RMSE values of AIEKF are reduced by about 21.6%, 15.5% and 30.7% in the east, north and up directions, respectively.

  3. Modelling and analysing track cycling Omnium performances using statistical and machine learning techniques.

    Science.gov (United States)

    Ofoghi, Bahadorreza; Zeleznikow, John; Dwyer, Dan; Macmahon, Clare

    2013-01-01

    This article describes the utilisation of an unsupervised machine learning technique and statistical approaches (e.g., the Kolmogorov-Smirnov test) that assist cycling experts in the crucial decision-making processes for athlete selection, training, and strategic planning in the track cycling Omnium. The Omnium is a multi-event competition that will be included in the summer Olympic Games for the first time in 2012. Presently, selectors and cycling coaches make decisions based on experience and intuition. They rarely have access to objective data. We analysed both the old five-event (first raced internationally in 2007) and new six-event (first raced internationally in 2011) Omniums and found that the addition of the elimination race component to the Omnium has, contrary to expectations, not favoured track endurance riders. We analysed the Omnium data and also determined the inter-relationships between different individual events as well as between those events and the final standings of riders. In further analysis, we found that there is no maximum ranking (poorest performance) in each individual event that riders can afford whilst still winning a medal. We also found the required times for riders to finish the timed components that are necessary for medal winning. The results of this study consider the scoring system of the Omnium and inform decision-making toward successful participation in future major Omnium competitions.

  4. Cognitive effort in direct and inverse translation performance: Insight from eye-tracking technology

    Directory of Open Access Journals (Sweden)

    Aline Ferreira

    2016-12-01

    Full Text Available This case study examined the translation performance of four professional translators with the aim of exploring the cognitive effort involved in direct and inverse translation. Four professional translators translated two comparable texts from English into Spanish and from Spanish into English. Eye-tracking technology was used to analyze the total time spent in each task, fixation time, and average fixation time. Fixation count in three areas of interest was measured including: source text, target text, and browser, used as an external support. Results suggested that although total time and fixation count were indicators of cognitive effort during the tasks, fixation count in the areas of interest data showed that more effort was directed toward the source text in both tasks. Overall, this study demonstrates that while more traditional measures for translation difficulty (e.g., total time indicate more effort in the inverse translation task, eye-tracking data indicate that differences in the effort applied in both directions must be carefully analyzed, mostly regarding the areas of interest.

  5. Description and performance of track and primary-vertex reconstruction with the CMS tracker

    CERN Document Server

    Chatrchyan, Serguei; Sirunyan, Albert M; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hartl, Christian; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kiesenhofer, Wolfgang; Knünz, Valentin; Krammer, Manfred; Krätschmer, Ilse; Liko, Dietrich; Mikulec, Ivan; Rabady, Dinyar; Rahbaran, Babak; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Treberer-Treberspurg, Wolfgang; Waltenberger, Wolfgang; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Alderweireldt, Sara; Bansal, Monika; Bansal, Sunil; Beaumont, Willem; Cornelis, Tom; De Wolf, Eddi A; Janssen, Xavier; Knutsson, Albert; Luyckx, Sten; Mucibello, Luca; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Van Spilbeeck, Alex; Blekman, Freya; Blyweert, Stijn; D'Hondt, Jorgen; Devroede, Olivier; Heracleous, Natalie; Kalogeropoulos, Alexis; Keaveney, James; Kim, Tae Jeong; Lowette, Steven; Maes, Michael; Olbrechts, Annik; Python, Quentin; Strom, Derek; Tavernier, Stefaan; Van Doninck, Walter; Van Lancker, Luc; Van Mulders, Petra; Van Onsem, Gerrit Patrick; Villella, Ilaria; Caillol, Cécile; Clerbaux, Barbara; De Lentdecker, Gilles; Favart, Laurent; Gay, Arnaud; Léonard, Alexandre; Marage, Pierre Edouard; Mohammadi, Abdollah; Perniè, Luca; Reis, Thomas; Seva, Tomislav; Thomas, Laurent; Vander Velde, Catherine; Vanlaer, Pascal; Wang, Jian; Adler, Volker; Beernaert, Kelly; Benucci, Leonardo; Cimmino, Anna; Costantini, Silvia; Crucy, Shannon; Dildick, Sven; Garcia, Guillaume; Klein, Benjamin; Lellouch, Jérémie; Mccartin, Joseph; Ocampo Rios, Alberto Andres; Ryckbosch, Dirk; Salva Diblen, Sinem; Sigamani, Michael; Strobbe, Nadja; Thyssen, Filip; Tytgat, Michael; Walsh, Sinead; Yazgan, Efe; Zaganidis, Nicolas; Basegmez, Suzan; Beluffi, Camille; Bruno, Giacomo; Castello, Roberto; Caudron, Adrien; Ceard, Ludivine; Da Silveira, Gustavo Gil; De Callatay, Bernard; Delaere, Christophe; Du Pree, Tristan; Favart, Denis; Forthomme, Laurent; Giammanco, Andrea; Hollar, Jonathan; Jez, Pavel; Komm, Matthias; Lemaitre, Vincent; Liao, Junhui; Michotte, Daniel; Militaru, Otilia; Nuttens, Claude; Pagano, Davide; Pin, Arnaud; Piotrzkowski, Krzysztof; Popov, Andrey; Quertenmont, Loic; Selvaggi, Michele; Vidal Marono, Miguel; Vizan Garcia, Jesus Manuel; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Hammad, Gregory Habib; Alves, Gilvan; Correa Martins Junior, Marcos; Dos Reis Martins, Thiago; Pol, Maria Elena; Henrique Gomes E Souza, Moacyr; Aldá Júnior, Walter Luiz; Carvalho, Wagner; Chinellato, Jose; Custódio, Analu; Melo Da Costa, Eliza; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Malbouisson, Helena; Malek, Magdalena; Matos Figueiredo, Diego; Mundim, Luiz; Nogima, Helio; Prado Da Silva, Wanda Lucia; Santaolalla, Javier; Santoro, Alberto; Sznajder, Andre; Tonelli Manganote, Edmilson José; Vilela Pereira, Antonio; Bernardes, Cesar Augusto; De Almeida Dias, Flavia; Tomei, Thiago; De Moraes Gregores, Eduardo; Mercadante, Pedro G; Novaes, Sergio F; Padula, Sandra; Genchev, Vladimir; Iaydjiev, Plamen; Marinov, Andrey; Piperov, Stefan; Rodozov, Mircho; Sultanov, Georgi; Vutova, Mariana; Dimitrov, Anton; Glushkov, Ivan; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Chen, Mingshui; Du, Ran; Jiang, Chun-Hua; Liang, Dong; Liang, Song; Meng, Xiangwei; Plestina, Roko; Tao, Junquan; Wang, Xianyou; Wang, Zheng; Asawatangtrakuldee, Chayanit; Ban, Yong; Guo, Yifei; Li, Qiang; Li, Wenbo; Liu, Shuai; Mao, Yajun; Qian, Si-Jin; Wang, Dayong; Zhang, Linlin; Zou, Wei; Avila, Carlos; Carrillo Montoya, Camilo Andres; Chaparro Sierra, Luisa Fernanda; Florez, Carlos; Gomez, Juan Pablo; Gomez Moreno, Bernardo; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Kovac, Marko; Brigljevic, Vuko; Kadija, Kreso; Luetic, Jelena; Mekterovic, Darko; Morovic, Srecko; Sudic, Lucija; Attikis, Alexandros; Mavromanolakis, Georgios; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A; Finger, Miroslav; Finger Jr, Michael; Abdelalim, Ahmed Ali; Assran, Yasser; Elgammal, Sherif; Ellithi Kamel, Ali; Mahmoud, Mohammed; Radi, Amr; Kadastik, Mario; Müntel, Mait; Murumaa, Marion; Raidal, Martti; Rebane, Liis; Tiko, Andres; Eerola, Paula; Fedi, Giacomo; Voutilainen, Mikko; Härkönen, Jaakko; Karimäki, Veikko; Kinnunen, Ritva; Kortelainen, Matti J; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Peltola, Timo; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Wendland, Lauri; Tuuva, Tuure; Besancon, Marc; Couderc, Fabrice; Dejardin, Marc; Denegri, Daniel; Fabbro, Bernard; Faure, Jean-Louis; Ferri, Federico; Ganjour, Serguei; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Nayak, Aruna; Rander, John; Rosowsky, André; Titov, Maksym; Baffioni, Stephanie; Beaudette, Florian; Busson, Philippe; Charlot, Claude; Daci, Nadir; Dahms, Torsten; Dalchenko, Mykhailo; Dobrzynski, Ludwik; Florent, Alice; Granier de Cassagnac, Raphael; Miné, Philippe; Mironov, Camelia; Naranjo, Ivo Nicolas; Nguyen, Matthew; Ochando, Christophe; Paganini, Pascal; Sabes, David; Salerno, Roberto; Sauvan, Jean-Baptiste; Sirois, Yves; Veelken, Christian; Yilmaz, Yetkin; Zabi, Alexandre; Agram, Jean-Laurent; Andrea, Jeremy; Bloch, Daniel; Bonnin, Christian; Brom, Jean-Marie; Chabert, Eric Christian; Charles, Laurent; Collard, Caroline; Conte, Eric; Drouhin, Frédéric; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Goetzmann, Christophe; Gross, Laurent; Juillot, Pierre; Le Bihan, Anne-Catherine; Van Hove, Pierre; Gadrat, Sébastien; Baulieu, Guillaume; Beauceron, Stephanie; Beaupere, Nicolas; Boudoul, Gaelle; Brochet, Sébastien; Chasserat, Julien; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fan, Jiawei; Fay, Jean; Gascon, Susan; Gouzevitch, Maxime; Ille, Bernard; Kurca, Tibor; Lethuillier, Morgan; Lumb, Nicholas; Mathez, Hervé; Mirabito, Laurent; Perries, Stephane; Ruiz Alvarez, José David; Sgandurra, Louis; Sordini, Viola; Vander Donckt, Muriel; Verdier, Patrice; Viret, Sébastien; Xiao, Hong; Zoccarato, Yannick; Tsamalaidze, Zviad; Autermann, Christian; Beranek, Sarah; Bontenackels, Michael; Calpas, Betty; Edelhoff, Matthias; Esser, Hans; Feld, Lutz; Hindrichs, Otto; Karpinski, Waclaw; Klein, Katja; Kukulies, Christoph; Lipinski, Martin; Ostapchuk, Andrey; Perieanu, Adrian; Pierschel, Gerhard; Preuten, Marius; Raupach, Frank; Sammet, Jan; Schael, Stefan; Schulte, Jan-Frederik; Schwering, Georg; Sprenger, Daniel; Verlage, Tobias; Weber, Hendrik; Wittmer, Bruno; Wlochal, Michael; Zhukov, Valery; Ata, Metin; Caudron, Julien; Dietz-Laursonn, Erik; Duchardt, Deborah; Erdmann, Martin; Fischer, Robert; Güth, Andreas; Hebbeker, Thomas; Heidemann, Carsten; Hoepfner, Kerstin; Klingebiel, Dennis; Knutzen, Simon; Kreuzer, Peter; Merschmeyer, Markus; Meyer, Arnd; Olschewski, Mark; Padeken, Klaas; Papacz, Paul; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Teyssier, Daniel; Thüer, Sebastian; Weber, Martin; Cherepanov, Vladimir; Erdogan, Yusuf; Flügge, Günter; Geenen, Heiko; Geisler, Matthias; Haj Ahmad, Wael; Hoehle, Felix; Kargoll, Bastian; Kress, Thomas; Kuessel, Yvonne; Lingemann, Joschka; Nowack, Andreas; Nugent, Ian Michael; Perchalla, Lars; Pistone, Claudia; Pooth, Oliver; Stahl, Achim; Asin, Ivan; Bartosik, Nazar; Behr, Joerg; Behrenhoff, Wolf; Behrens, Ulf; Bell, Alan James; Bergholz, Matthias; Bethani, Agni; Borras, Kerstin; Burgmeier, Armin; Cakir, Altan; Calligaris, Luigi; Campbell, Alan; Choudhury, Somnath; Costanza, Francesco; Diez Pardos, Carmen; Dolinska, Ganna; Dooling, Samantha; Dorland, Tyler; Eckerlin, Guenter; Eckstein, Doris; Eichhorn, Thomas; Flucke, Gero; Geiser, Achim; Grebenyuk, Anastasia; Gunnellini, Paolo; Habib, Shiraz; Hampe, Jan; Hansen, Karsten; Hauk, Johannes; Hellwig, Gregor; Hempel, Maria; Horton, Dean; Jung, Hannes; Kasemann, Matthias; Katsas, Panagiotis; Kieseler, Jan; Kleinwort, Claus; Korol, Ievgen; Krämer, Mira; Krücker, Dirk; Lange, Wolfgang; Leonard, Jessica; Lipka, Katerina; Lohmann, Wolfgang; Lutz, Benjamin; Mankel, Rainer; Marfin, Ihar; Maser, Holger; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mnich, Joachim; Muhl, Carsten; Mussgiller, Andreas; Naumann-Emme, Sebastian; Novgorodova, Olga; Nowak, Friederike; Ntomari, Eleni; Perrey, Hanno; Petrukhin, Alexey; Pitzl, Daniel; Placakyte, Ringaile; Raspereza, Alexei; Ribeiro Cipriano, Pedro M; Riedl, Caroline; Ron, Elias; Sahin, Mehmet Özgür; Salfeld-Nebgen, Jakob; Saxena, Pooja; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Schröder, Matthias; Spannagel, Simon; Stein, Matthias; Vargas Trevino, Andrea Del Rocio; Walsh, Roberval; Wissing, Christoph; Zuber, Adam; Aldaya Martin, Maria; Berger, Lutz Olaf; Biskop, Heike; Blobel, Volker; Buhmann, Peter; Centis Vignali, Matteo; Enderle, Holger; Erfle, Joachim; Frensche, Benno; Garutti, Erika; Goebel, Kristin; Görner, Martin; Gosselink, Martijn; Haller, Johannes; Hoffmann, Malte; Höing, Rebekka Sophie; Junkes, Alexandra; Kirschenmann, Henning; Klanner, Robert; Kogler, Roman; Lange, Jörn; Lapsien, Tobias; Lenz, Teresa; Maettig, Stefan; Marchesini, Ivan; Matysek, Michael; Ott, Jochen; Peiffer, Thomas; Pietsch, Niklas; Pöhlsen, Thomas; Rathjens, Denis; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schlieckau, Eike; Schmidt, Alexander; Seidel, Markus; Poehlsen, Jennifer; Sola, Valentina; Stadie, Hartmut; Steinbrück, Georg; Troendle, Daniel; Usai, Emanuele; Vanelderen, Lukas; Barth, Christian; Barvich, Tobias; Baus, Colin; Berger, Joram; Boegelspacher, Felix; Böser, Christian; Butz, Erik; Chwalek, Thorsten; Colombo, Fabio; De Boer, Wim; Descroix, Alexis; Dierlamm, Alexander; Eber, Robert; Feindt, Michael; Guthoff, Moritz; Hartmann, Frank; Hauth, Thomas; Heindl, Stefan Michael; Held, Hauke; Hoffmann, Karl-Heinz; Husemann, Ulrich; Katkov, Igor; Kornmayer, Andreas; Kuznetsova, Ekaterina; Lobelle Pardo, Patricia; Martschei, Daniel; Mozer, Matthias Ulrich; Müller, Thomas; Niegel, Martin; Nürnberg, Andreas; Oberst, Oliver; Printz, Martin; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Röcker, Steffen; Schilling, Frank-Peter; Schott, Gregory; Simonis, Hans-Jürgen; Steck, Pia; Stober, Fred-Markus Helmut; Ulrich, Ralf; Wagner-Kuhr, Jeannine; Wayand, Stefan; Weiler, Thomas; Wolf, Roger; Zeise, Manuel; Anagnostou, Georgios; Daskalakis, Georgios; Geralis, Theodoros; Kesisoglou, Stilianos; Kyriakis, Aristotelis; Loukas, Demetrios; Markou, Athanasios; Markou, Christos; Psallidas, Andreas; Topsis-Giotis, Iasonas; Gouskos, Loukas; Panagiotou, Apostolos; Saoulidou, Niki; Stiliaris, Efstathios; Aslanoglou, Xenofon; Evangelou, Ioannis; Flouris, Giannis; Foudas, Costas; Jones, John; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Paradas, Evangelos; Bencze, Gyorgy; Hajdu, Csaba; Hidas, Pàl; Horvath, Dezso; Sikler, Ferenc; Veszpremi, Viktor; Vesztergombi, Gyorgy; Zsigmond, Anna Julia; Beni, Noemi; Czellar, Sandor; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Karancsi, János; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Swain, Sanjay Kumar; Beri, Suman Bala; Bhatnagar, Vipin; Dhingra, Nitish; Gupta, Ruchi; Kaur, Manjit; Mehta, Manuk Zubin; Mittal, Monika; Nishu, Nishu; Sharma, Archana; Singh, Jasbir; Kumar, Ashok; Kumar, Arun; Ahuja, Sudha; Bhardwaj, Ashutosh; Choudhary, Brajesh C; Kumar, Ajay; Malhotra, Shivali; Naimuddin, Md; Ranjan, Kirti; Sharma, Varun; Shivpuri, Ram Krishen; Banerjee, Sunanda; Bhattacharya, Satyaki; Chatterjee, Kalyanmoy; Dutta, Suchandra; Gomber, Bhawna; Jain, Sandhya; Jain, Shilpi; Khurana, Raman; Modak, Atanu; Mukherjee, Swagata; Roy, Debarati; Sarkar, Subir; Sharan, Manoj; Singh, Anil; Abdulsalam, Abdulla; Dutta, Dipanwita; Kailas, Swaminathan; Kumar, Vineet; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Topkar, Anita; Aziz, Tariq; Banerjee, Sudeshna; Chatterjee, Rajdeep Mohan; Dugad, Shashikant; Ganguly, Sanmay; Ghosh, Saranya; Guchait, Monoranjan; Gurtu, Atul; Kole, Gouranga; Kumar, Sanjeev; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Parida, Bibhuti; Sudhakar, Katta; Wickramage, Nadeesha; Arfaei, Hessamaddin; Bakhshiansohi, Hamed; Behnamian, Hadi; Etesami, Seyed Mohsen; Fahim, Ali; Jafari, Abideh; Khakzad, Mohsen; Mohammadi Najafabadi, Mojtaba; Naseri, Mohsen; Paktinat Mehdiabadi, Saeid; Safarzadeh, Batool; Zeinali, Maryam; Grunewald, Martin; Abbrescia, Marcello; Barbone, Lucia; Calabria, Cesare; Cariola, Pasquale; Chhibra, Simranjit Singh; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; De Robertis, Giuseppe; Fiore, Luigi; Franco, Michele; Iaselli, Giuseppe; Loddo, Flavio; Maggi, Giorgio; Maggi, Marcello; Marangelli, Bartolomeo; My, Salvatore; Nuzzo, Salvatore; Pacifico, Nicola; Pompili, Alexis; Pugliese, Gabriella; Radogna, Raffaella; Sala, Giuliano; Selvaggi, Giovanna; Silvestris, Lucia; Singh, Gurpreet; Venditti, Rosamaria; Verwilligen, Piet; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Brigliadori, Luca; Campanini, Renato; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Grandi, Claudio; Guiducci, Luigi; Marcellini, Stefano; Masetti, Gianni; Meneghelli, Marco; Montanari, Alessandro; Navarria, Francesco; Odorici, Fabrizio; Perrotta, Andrea; Primavera, Federica; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gian Piero; Tosi, Nicolò; Travaglini, Riccardo; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Giordano, Ferdinando; Potenza, Renato; Saizu, Mirela Angela; Scinta, Manuel; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Brianzi, Mirko; Ciaranfi, Roberto; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Gallo, Elisabetta; Gonzi, Sandro; Gori, Valentina; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Scarlini, Enrico; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Fabbri, Franco; Piccolo, Davide; Fabbricatore, Pasquale; Ferretti, Roberta; Ferro, Fabrizio; Lo Vetere, Maurizio; Musenich, Riccardo; Robutti, Enrico; Tosi, Silvano; D'Angelo, Pasqualino; Dinardo, Mauro Emanuele; Fiorendi, Sara; Gennai, Simone; Gerosa, Raffaele; Ghezzi, Alessio; Govoni, Pietro; Lucchini, Marco Toliman; Malvezzi, Sandra; Manzoni, Riccardo Andrea; Martelli, Arabella; Marzocchi, Badder; Menasce, Dario; Moroni, Luigi; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Tabarelli de Fatis, Tommaso; Buontempo, Salvatore; Cavallo, Nicola; Di Guida, Salvatore; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Meola, Sabino; Merola, Mario; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bellato, Marco; Bisello, Dario; Branca, Antonio; Carlin, Roberto; Checchia, Paolo; Dall'Osso, Martino; Dorigo, Tommaso; Galanti, Mario; Gasparini, Fabrizio; Gasparini, Ugo; Giubilato, Piero; Gozzelino, Andrea; Kanishchev, Konstantin; Lacaprara, Stefano; Lazzizzera, Ignazio; Margoni, Martino; Meneguzzo, Anna Teresa; Passaseo, Marina; Pazzini, Jacopo; Pegoraro, Matteo; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Zotto, Pierluigi; Zucchetta, Alberto; Zumerle, Gianni; Gabusi, Michele; Gaioni, Luigi; Manazza, Alessia; Manghisoni, Massimo; Ratti, Lodovico; Ratti, Sergio P; Re, Valerio; Riccardi, Cristina; Salvini, Paola; Traversi, Gianluca; Vitulo, Paolo; Zucca, Stefano; Biasini, Maurizio; Bilei, Gian Mario; Bissi, Lucia; Checcucci, Bruno; Ciangottini, Diego; Conti, Elia; Fanò, Livio; Lariccia, Paolo; Magalotti, Daniel; Mantovani, Giancarlo; Menichelli, Mauro; Passeri, Daniele; Placidi, Pisana; Romeo, Francesco; Saha, Anirban; Salvatore, Michele; Santocchia, Attilio; Servoli, Leonello; Spiezia, Aniello; Androsov, Konstantin; Arezzini, Silvia; Azzurri, Paolo; Bagliesi, Giuseppe; Basti, Andrea; Bernardini, Jacopo; Boccali, Tommaso; Bosi, Filippo; Broccolo, Giuseppe; Calzolari, Federico; Castaldi, Rino; Ciampa, Alberto; Ciocci, Maria Agnese; Dell'Orso, Roberto; Donato, Silvio; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Grippo, Maria Teresa; Kraan, Aafke; Ligabue, Franco; Lomtadze, Teimuraz; Magazzu, Guido; Martini, Luca; Mazzoni, Enrico; Messineo, Alberto; Moggi, Andrea; Moon, Chang-Seong; Palla, Fabrizio; Raffaelli, Fabrizio; Rizzi, Andrea; Savoy-Navarro, Aurore; Serban, Alin Titus; Spagnolo, Paolo; Squillacioti, Paola; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Vernieri, Caterina; Barone, Luciano; Cavallari, Francesca; Del Re, Daniele; Diemoz, Marcella; Grassi, Marco; Jorda, Clara; Longo, Egidio; Margaroli, Fabrizio; Meridiani, Paolo; Micheli, Francesco; Nourbakhsh, Shervin; Organtini, Giovanni; Paramatti, Riccardo; Rahatlou, Shahram; Rovelli, Chiara; Soffi, Livia; Traczyk, Piotr; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Bellan, Riccardo; Biino, Cristina; Cartiglia, Nicolo; Casasso, Stefano; Costa, Marco; Degano, Alessandro; Demaria, Natale; Mariotti, Chiara; Maselli, Silvia; Migliore, Ernesto; Monaco, Vincenzo; Monteil, Ennio; Musich, Marco; Obertino, Maria Margherita; Ortona, Giacomo; Pacher, Luca; Pastrone, Nadia; Pelliccioni, Mario; Potenza, Alberto; Rivetti, Angelo; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Tamponi, Umberto; Trapani, Pier Paolo; Belforte, Stefano; Candelise, Vieri; Casarsa, Massimo; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; La Licata, Chiara; Marone, Matteo; Montanino, Damiana; Penzo, Aldo; Schizzi, Andrea; Umer, Tomo; Zanetti, Anna; Chang, Sunghyun; Kim, Tae Yeon; Nam, Soon-Kwon; Kim, Dong Hee; Kim, Gui Nyun; Kim, Ji Eun; Kim, Min Suk; Kong, Dae Jung; Lee, Sangeun; Oh, Young Do; Park, Hyangkyu; Son, Dong-Chul; Kim, Jae Yool; Kim, Zero Jaeho; Song, Sanghyeon; Choi, Suyong; Gyun, Dooyeon; Hong, Byung-Sik; Jo, Mihee; Kim, Hyunchul; Kim, Yongsun; Lee, Kyong Sei; Park, Sung Keun; Roh, Youn; Choi, Minkyoo; Kim, Ji Hyun; Park, Chawon; Park, Inkyu; Park, Sangnam; Ryu, Geonmo; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Kwon, Eunhyang; Lee, Byounghoon; Lee, Jongseok; Seo, Hyunkwan; Yu, Intae; Juodagalvis, Andrius; Komaragiri, Jyothsna Rani; Castilla-Valdez, Heriberto; De La Cruz-Burelo, Eduard; Heredia-de La Cruz, Ivan; Lopez-Fernandez, Ricardo; Martínez-Ortega, Jorge; Sánchez Hernández, Alberto; Villasenor-Cendejas, Luis Manuel; Carrillo Moreno, Salvador; Vazquez Valencia, Fabiola; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Krofcheck, David; Butler, Philip H; Doesburg, Robert; Reucroft, Steve; Ahmad, Ashfaq; Ahmad, Muhammad; Asghar, Muhammad Irfan; Butt, Jamila; Hassan, Qamar; Hoorani, Hafeez R; Khan, Wajid Ali; Khurshid, Taimoor; Qazi, Shamona; Shah, Mehar Ali; Shoaib, Muhammad; Bialkowska, Helena; Bluj, Michal; Boimska, Bożena; Frueboes, Tomasz; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Romanowska-Rybinska, Katarzyna; Szleper, Michal; Wrochna, Grzegorz; Zalewski, Piotr; Brona, Grzegorz; Bunkowski, Karol; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Kalinowski, Artur; Konecki, Marcin; Krolikowski, Jan; Misiura, Maciej; Wolszczak, Weronika; Bargassa, Pedrame; Beirão Da Cruz E Silva, Cristóvão; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Nguyen, Federico; Rodrigues Antunes, Joao; Seixas, Joao; Varela, Joao; Vischia, Pietro; Bunin, Pavel; Gavrilenko, Mikhail; Golutvin, Igor; Gorbunov, Ilya; Kamenev, Alexey; Karjavin, Vladimir; Konoplyanikov, Viktor; Kozlov, Guennady; Lanev, Alexander; Malakhov, Alexander; Matveev, Viktor; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Skatchkov, Nikolai; Smirnov, Vitaly; Zarubin, Anatoli; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Murzin, Victor; Oreshkin, Vadim; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Vorobyev, Andrey; Andreev, Yuri; Dermenev, Alexander; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Pashenkov, Anatoli; Tlisov, Danila; Toropin, Alexander; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Popov, Vladimir; Safronov, Grigory; Semenov, Sergey; Spiridonov, Alexander; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Andreev, Vladimir; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Rusakov, Sergey V; Vinogradov, Alexey; Belyaev, Andrey; Boos, Edouard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Kaminskiy, Alexandre; Klyukhin, Vyacheslav; Kodolova, Olga; Lokhtin, Igor; Obraztsov, Stepan; Petrushanko, Sergey; Savrin, Viktor; Azhgirey, Igor; Bayshev, Igor; Bitioukov, Sergei; Kachanov, Vassili; Kalinin, Alexey; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Sobol, Andrei; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Dordevic, Milos; Ekmedzic, Marko; Milosevic, Jovan; Aguilar-Benitez, Manuel; Alcaraz Maestre, Juan; Battilana, Carlo; Calvo, Enrique; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Delgado Peris, Antonio; Domínguez Vázquez, Daniel; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Ferrando, Antonio; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M; Josa, Maria Isabel; Merino, Gonzalo; Navarro De Martino, Eduardo; Pérez Calero Yzquierdo, Antonio María; Puerta Pelayo, Jesus; Quintario Olmeda, Adrián; Redondo, Ignacio; Romero, Luciano; Senghi Soares, Mara; Willmott, Carlos; Albajar, Carmen; de Trocóniz, Jorge F; Missiroli, Marino; Brun, Hugues; Cuevas, Javier; Fernandez Menendez, Javier; Folgueras, Santiago; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Brochero Cifuentes, Javier Andres; Cabrillo, Iban Jose; Calderon, Alicia; Duarte Campderros, Jordi; Fernandez, Marcos; Gomez, Gervasio; Gonzalez Sanchez, Javier; Graziano, Alberto; Jaramillo Echeverria, Richard William; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Matorras, Francisco; Moya, David; Munoz Sanchez, Francisca Javiela; Piedra Gomez, Jonatan; Rodrigo, Teresa; Rodríguez-Marrero, Ana Yaiza; Ruiz-Jimeno, Alberto; Scodellaro, Luca; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Ahmed, Imtiaz; Albert, Eric; Auffray, Etiennette; Auzinger, Georg; Bachtis, Michail; Baillon, Paul; Ball, Austin; Barney, David; Benaglia, Andrea; Bendavid, Joshua; Benhabib, Lamia; Benitez, Jose F; Bernet, Colin; Berruti, Gaia Maria; Bianchi, Giovanni; Blanchot, Georges; Bloch, Philippe; Bocci, Andrea; Bonato, Alessio; Bondu, Olivier; Botta, Cristina; Breuker, Horst; Camporesi, Tiziano; Ceresa, Davide; Cerminara, Gianluca; Christiansen, Jorgen; Christiansen, Tim; Chávez Niemelä, Aleksis Osku; Coarasa Perez, Jose Antonio; Colafranceschi, Stefano; D'Alfonso, Mariarosaria; D'Auria, Andrea; D'Enterria, David; Dabrowski, Anne; Daguin, Jerome; David Tinoco Mendes, Andre; De Guio, Federico; De Roeck, Albert; De Visscher, Simon; Detraz, Stephane; Deyrail, Dominique; Dobson, Marc; Dupont-Sagorin, Niels; Elliott-Peisert, Anna; Eugster, Jürg; Faccio, Federico; Felici, Daniele; Frank, Norbert; Franzoni, Giovanni; Funk, Wolfgang; Giffels, Manuel; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Girone, Maria; Giunta, Marina; Glege, Frank; Gomez-Reino Garrido, Robert; Gowdy, Stephen; Guida, Roberto; Hammer, Josef; Hansen, Magnus; Harris, Philip; Honma, Alan; Innocente, Vincenzo; Janot, Patrick; Kaplon, Jan; Karavakis, Edward; Katopodis, Theodoros; Kottelat, Luc-Joseph; Kousouris, Konstantinos; Kovács, Márk István; Krajczar, Krisztian; Krzempek, Lukasz; Lecoq, Paul; Lourenco, Carlos; Magini, Nicolo; Malgeri, Luca; Mannelli, Marcello; Marchioro, Alessandro; Marconi, Sara; Marques Pinho Noite, João; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Michelis, Stefano; Moll, Michael; Moortgat, Filip; Mulders, Martijn; Musella, Pasquale; Onnela, Antti; Orsini, Luciano; Pakulski, Tymon; Palencia Cortezon, Enrique; Pavis, Steven; Perez, Emmanuelle; Pernot, Jean-Francois; Perrozzi, Luca; Petagna, Paolo; Petrilli, Achille; Petrucciani, Giovanni; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Piparo, Danilo; Plagge, Michael; Postema, Hans; Racz, Attila; Reece, William; Rolandi, Gigi; Rovere, Marco; Rzonca, Marcin; Sakulin, Hannes; Santanastasio, Francesco; Schäfer, Christoph; Schwick, Christoph; Sekmen, Sezen; Sharma, Archana; Siegrist, Patrice; Silva, Pedro; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Steggemann, Jan; Stieger, Benjamin; Stoye, Markus; Szwarc, Tomasz; Tropea, Paola; Troska, Jan; Tsirou, Andromachi; Vasey, François; Veres, Gabor Istvan; Verlaat, Bart; Vichoudis, Paschalis; Vlimant, Jean-Roch; Wöhri, Hermine Katharina; Zeuner, Wolfram Dietrich; Zwalinski, Lukasz; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; König, Stefan; Kotlinski, Danek; Langenegger, Urs; Meier, Beat; Renker, Dieter; Rohe, Tilman; Streuli, Silvan; Bachmair, Felix; Bäni, Lukas; Becker, Robert; Bianchini, Lorenzo; Bortignon, Pierluigi; Buchmann, Marco-Andrea; Casal, Bruno; Chanon, Nicolas; Da Silva Di Calafiori, Diogo Raphael; Deisher, Amanda; Dissertori, Günther; Dittmar, Michael; Djambazov, Lubomir; Donegà, Mauro; Dünser, Marc; Eller, Philipp; Grab, Christoph; Hits, Dmitry; Horisberger, Urs; Hoss, Jan; Lustermann, Werner; Mangano, Boris; Marini, Andrea Carlo; Martinez Ruiz del Arbol, Pablo; Masciovecchio, Mario; Meister, Daniel; Mohr, Niklas; Nägeli, Christoph; Nef, Pascal; Nessi-Tedaldi, Francesca; Pandolfi, Francesco; Pape, Luc; Pauss, Felicitas; Peruzzi, Marco; Quittnat, Milena; Ronga, Frederic Jean; Röser, Ulf; Rossini, Marco; Starodumov, Andrei; Takahashi, Maiko; Tauscher, Ludwig; Theofilatos, Konstantinos; Treille, Daniel; von Gunten, Hans Peter; Wallny, Rainer; Weber, Hannsjoerg Artur; Amsler, Claude; Bösiger, Kurt; Canelli, Maria Florencia; Chiochia, Vincenzo; De Cosa, Annapaola; Favaro, Carlotta; Hinzmann, Andreas; Hreus, Tomas; Ivova Rikova, Mirena; Kilminster, Benjamin; Lange, Clemens; Maier, Reto; Millan Mejias, Barbara; Ngadiuba, Jennifer; Robmann, Peter; Snoek, Hella; Taroni, Silvia; Verzetti, Mauro; Yang, Yong; Cardaci, Marco; Chen, Kuan-Hsin; Ferro, Cristina; Kuo, Chia-Ming; Li, Syue-Wei; Lin, Willis; Lu, Yun-Ju; Volpe, Roberta; Yu, Shin-Shan; Bartalini, Paolo; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Chen, Po-Hsun; Dietz, Charles; Grundler, Ulysses; Hou, George Wei-Shu; Hsiung, Yee; Kao, Kai-Yi; Lei, Yeong-Jyi; Liu, Yueh-Feng; Lu, Rong-Shyang; Majumder, Devdatta; Petrakou, Eleni; Shi, Xin; Shiu, Jing-Ge; Tzeng, Yeng-Ming; Wang, Minzu; Wilken, Rachel; Asavapibhop, Burin; Suwonjandee, Narumon; Adiguzel, Aytul; Bakirci, Mustafa Numan; Cerci, Salim; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gokbulut, Gul; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozdemir, Kadri; Ozturk, Sertac; Polatoz, Ayse; Sogut, Kenan; Sunar Cerci, Deniz; Tali, Bayram; Topakli, Huseyin; Vergili, Mehmet; Akin, Ilina Vasileva; Aliev, Takhmasib; Bilin, Bugra; Bilmis, Selcuk; Deniz, Muhammed; Gamsizkan, Halil; Guler, Ali Murat; Karapinar, Guler; Ocalan, Kadir; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Surat, Ugur Emrah; Yalvac, Metin; Zeyrek, Mehmet; Gülmez, Erhan; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Ozkorucuklu, Suat; Bahtiyar, Hüseyin; Barlas, Esra; Cankocak, Kerem; Günaydin, Yusuf Oguzhan; Vardarli, Fuat Ilkehan; Yücel, Mete; Levchuk, Leonid; Sorokin, Pavel; Brooke, James John; Clement, Emyr; Cussans, David; Flacher, Henning; Frazier, Robert; Goldstein, Joel; Grimes, Mark; Heath, Greg P; Heath, Helen F; Jacob, Jeson; Kreczko, Lukasz; Lucas, Chris; Meng, Zhaoxia; Newbold, Dave M; Paramesvaran, Sudarshan; Poll, Anthony; Senkin, Sergey; Smith, Vincent J; Williams, Thomas; Bell, Ken W; Belyaev, Alexander; Brew, Christopher; Brown, Robert M; Cockerill, David JA; Coughlan, John A; Harder, Kristian; Harper, Sam; Ilic, Jelena; Olaiya, Emmanuel; Petyt, David; Shepherd-Themistocleous, Claire; Thea, Alessandro; Tomalin, Ian R; Womersley, William John; Worm, Steven; Baber, Mark; Bainbridge, Robert; Buchmuller, Oliver; Burton, Darren; Colling, David; Cripps, Nicholas; Cutajar, Michael; Dauncey, Paul; Davies, Gavin; Della Negra, Michel; Ferguson, William; Fulcher, Jonathan; Futyan, David; Gilbert, Andrew; Guneratne Bryer, Arlo; Hall, Geoffrey; Hatherell, Zoe; Hays, Jonathan; Iles, Gregory; Jarvis, Martyn; Karapostoli, Georgia; Kenzie, Matthew; Lane, Rebecca; Lucas, Robyn; Lyons, Louis; Magnan, Anne-Marie; Marrouche, Jad; Mathias, Bryn; Nandi, Robin; Nash, Jordan; Nikitenko, Alexander; Pela, Joao; Pesaresi, Mark; Petridis, Konstantinos; Pioppi, Michele; Raymond, David Mark; Rogerson, Samuel; Rose, Andrew; Seez, Christopher; Sharp, Peter; Sparrow, Alex; Tapper, Alexander; Vazquez Acosta, Monica; Virdee, Tejinder; Wakefield, Stuart; Wardle, Nicholas; Cole, Joanne; Hobson, Peter R; Khan, Akram; Kyberd, Paul; Leggat, Duncan; Leslie, Dawn; Martin, William; Reid, Ivan; Symonds, Philip; Teodorescu, Liliana; Turner, Mark; Dittmann, Jay; Hatakeyama, Kenichi; Kasmi, Azeddine; Liu, Hongxuan; Scarborough, Tara; Charaf, Otman; Cooper, Seth; Henderson, Conor; Rumerio, Paolo; Avetisyan, Aram; Bose, Tulika; Fantasia, Cory; Heister, Arno; Lawson, Philip; Lazic, Dragoslav; Richardson, Clint; Rohlf, James; Sperka, David; St John, Jason; Sulak, Lawrence; Alimena, Juliette; Bhattacharya, Saptaparna; Christopher, Grant; Cutts, David; Demiragli, Zeynep; Ferapontov, Alexey; Garabedian, Alex; Heintz, Ulrich; Jabeen, Shabnam; Kukartsev, Gennadiy; Laird, Edward; Landsberg, Greg; Luk, Michael; Narain, Meenakshi; Segala, Michael; Sinthuprasith, Tutanon; Speer, Thomas; Swanson, Joshua; Breedon, Richard; Breto, Guillermo; Calderon De La Barca Sanchez, Manuel; Chauhan, Sushil; Chertok, Maxwell; Conway, John; Conway, Rylan; Cox, Peter Timothy; Erbacher, Robin; Flores, Chad; Gardner, Michael; Ko, Winston; Kopecky, Alexandra; Lander, Richard; Miceli, Tia; Mulhearn, Michael; Pellett, Dave; Pilot, Justin; Ricci-Tam, Francesca; Rutherford, Britney; Searle, Matthew; Shalhout, Shalhout; Smith, John; Squires, Michael; Thomson, John; Tripathi, Mani; Wilbur, Scott; Yohay, Rachel; Andreev, Valeri; Cline, David; Cousins, Robert; Erhan, Samim; Everaerts, Pieter; Farrell, Chris; Felcini, Marta; Hauser, Jay; Ignatenko, Mikhail; Jarvis, Chad; Rakness, Gregory; Schlein, Peter; Takasugi, Eric; Valuev, Vyacheslav; Weber, Matthias; Babb, John; Burt, Kira; Clare, Robert; Ellison, John Anthony; Gary, J William; Hanson, Gail; Heilman, Jesse; Jandir, Pawandeep; Lacroix, Florent; Liu, Hongliang; Long, Owen Rosser; Luthra, Arun; Malberti, Martina; Nguyen, Harold; Olmedo Negrete, Manuel; Shrinivas, Amithabh; Sturdy, Jared; Sumowidagdo, Suharyo; Wimpenny, Stephen; Andrews, Warren; Branson, James G; Cerati, Giuseppe Benedetto; Cittolin, Sergio; D'Agnolo, Raffaele Tito; Evans, David; Holzner, André; Kelley, Ryan; Kovalskyi, Dmytro; Lebourgeois, Matthew; Letts, James; Macneill, Ian; Padhi, Sanjay; Palmer, Christopher; Pieri, Marco; Sani, Matteo; Sharma, Vivek; Simon, Sean; Sudano, Elizabeth; Tadel, Matevz; Tu, Yanjun; Vartak, Adish; Wasserbaech, Steven; Würthwein, Frank; Yagil, Avraham; Yoo, Jaehyeok; Barge, Derek; Bradmiller-Feld, John; Campagnari, Claudio; Danielson, Thomas; Dishaw, Adam; Flowers, Kristen; Franco Sevilla, Manuel; Geffert, Paul; George, Christopher; Golf, Frank; Incandela, Joe; Justus, Christopher; Kyre, Susanne; Magaña Villalba, Ricardo; Mccoll, Nickolas; Mullin, Sam Daniel; Pavlunin, Viktor; Richman, Jeffrey; Rossin, Roberto; Stuart, David; To, Wing; West, Christopher; White, Dean; Apresyan, Artur; Bornheim, Adolf; Bunn, Julian; Chen, Yi; Di Marco, Emanuele; Duarte, Javier; Kcira, Dorian; Mott, Alexander; Newman, Harvey B; Pena, Cristian; Rogan, Christopher; Spiropulu, Maria; Timciuc, Vladlen; Wilkinson, Richard; Xie, Si; Zhu, Ren-Yuan; Azzolini, Virginia; Calamba, Aristotle; Carroll, Ryan; Ferguson, Thomas; Iiyama, Yutaro; Jang, Dong Wook; Paulini, Manfred; Russ, James; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Drell, Brian Robert; Ford, William T; Gaz, Alessandro; Luiggi Lopez, Eduardo; Nauenberg, Uriel; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Alexander, James; Chatterjee, Avishek; Eggert, Nicholas; Gibbons, Lawrence Kent; Hopkins, Walter; Khukhunaishvili, Aleko; Kreis, Benjamin; Mirman, Nathan; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Ryd, Anders; Salvati, Emmanuele; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Tucker, Jordan; Weng, Yao; Winstrom, Lucas; Wittich, Peter; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Apollinari, Giorgio; Bauerdick, Lothar AT; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C; Burkett, Kevin; Butler, Joel Nathan; Chetluru, Vasundhara; Cheung, Harry; Chlebana, Frank; Chramowicz, John; Cihangir, Selcuk; Cooper, William; Deptuch, Grzegorz; Derylo, Greg; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Gingu, V Cristinel; Gottschalk, Erik; Gray, Lindsey; Green, Dan; Grünendahl, Stefan; Gutsche, Oliver; Hare, Daryl; Harris, Robert M; Hirschauer, James; Hoff, Jim R; Hooberman, Benjamin; Howell, Joseph; Hrycyk, Michael; Jindariani, Sergo; Johnson, Marvin; Joshi, Umesh; Kaadze, Ketino; Klima, Boaz; Kwan, Simon; Lei, Chi Meng; Linacre, Jacob; Lincoln, Don; Lipton, Ron; Liu, Tiehui; Los, Serguei; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Martinez Outschoorn, Verena Ingrid; Maruyama, Sho; Mason, David; Matulik, Michael S; McBride, Patricia; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Nahn, Steve; Newman-Holmes, Catherine; O'Dell, Vivian; Prokofyev, Oleg; Prosser, Alan; Ratnikova, Natalia; Rivera, Ryan; Sexton-Kennedy, Elizabeth; Sharma, Seema; Spalding, William J; Spiegel, Leonard; Taylor, Lucas; Tkaczyk, Slawek; Tran, Nhan Viet; Trimpl, Marcel; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Voirin, Erik; Whitbeck, Andrew; Whitmore, Juliana; Wu, Weimin; Yang, Fan; Yun, Jae Chul; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Cheng, Tongguang; Das, Souvik; De Gruttola, Michele; Di Giovanni, Gian Piero; Dobur, Didar; Field, Richard D; Fisher, Matthew; Fu, Yu; Furic, Ivan-Kresimir; Hugon, Justin; Kim, Bockjoo; Konigsberg, Jacobo; Korytov, Andrey; Kropivnitskaya, Anna; Kypreos, Theodore; Low, Jia Fu; Matchev, Konstantin; Milenovic, Predrag; Mitselmakher, Guenakh; Muniz, Lana; Rinkevicius, Aurelijus; Shchutska, Lesya; Skhirtladze, Nikoloz; Snowball, Matthew; Yelton, John; Zakaria, Mohammed; Gaultney, Vanessa; Hewamanage, Samantha; Linn, Stephan; Markowitz, Pete; Martinez, German; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Bochenek, Joseph; Chen, Jie; Diamond, Brendan; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Johnson, Kurtis F; Prosper, Harrison; Veeraraghavan, Venkatesh; Weinberg, Marc; Baarmand, Marc M; Dorney, Brian; Hohlmann, Marcus; Kalakhety, Himali; Yumiceva, Francisco; Adams, Mark Raymond; Apanasevich, Leonard; Bazterra, Victor Eduardo; Betts, Russell Richard; Bucinskaite, Inga; Cavanaugh, Richard; Evdokimov, Olga; Gauthier, Lucie; Gerber, Cecilia Elena; Hofman, David Jonathan; Kapustka, Brian; Khalatyan, Samvel; Kurt, Pelin; Moon, Dong Ho; O'Brien, Christine; Sandoval Gonzalez, Irving Daniel; Silkworth, Christopher; Turner, Paul; Varelas, Nikos; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Clarida, Warren; Dilsiz, Kamuran; Duru, Firdevs; Haytmyradov, Maksat; Merlo, Jean-Pierre; Mermerkaya, Hamit; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Ogul, Hasan; Onel, Yasar; Ozok, Ferhat; Rahmat, Rahmat; Sen, Sercan; Tan, Ping; Tiras, Emrah; Wetzel, James; Yetkin, Taylan; Yi, Kai; Anderson, Ian; Barnett, Bruce Arnold; Blumenfeld, Barry; Bolognesi, Sara; Fehling, David; Gritsan, Andrei; Maksimovic, Petar; Martin, Christopher; Nash, Kevin; Osherson, Marc; Swartz, Morris; Xiao, Meng; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Gray, Julia; Kenny III, Raymond Patrick; Murray, Michael; Noonan, Daniel; Sanders, Stephen; Sekaric, Jadranka; Stringer, Robert; Tinti, Gemma; Wang, Quan; Wood, Jeffrey Scott; Barfuss, Anne-Fleur; Chakaberia, Irakli; Ivanov, Andrew; Khalil, Sadia; Makouski, Mikhail; Maravin, Yurii; Saini, Lovedeep Kaur; Shrestha, Shruti; Svintradze, Irakli; Taylor, Russell; Toda, Sachiko; Gronberg, Jeffrey; Lange, David; Rebassoo, Finn; Wright, Douglas; Baden, Drew; Calvert, Brian; Eno, Sarah Catherine; Gomez, Jaime; Hadley, Nicholas John; Kellogg, Richard G; Kolberg, Ted; Lu, Ying; Marionneau, Matthieu; Mignerey, Alice; Pedro, Kevin; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite; Tonwar, Suresh C; Apyan, Aram; Barbieri, Richard; Bauer, Gerry; Busza, Wit; Cali, Ivan Amos; Chan, Matthew; Di Matteo, Leonardo; Dutta, Valentina; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Gulhan, Doga; Klute, Markus; Lai, Yue Shi; Lee, Yen-Jie; Levin, Andrew; Luckey, Paul David; Ma, Teng; Paus, Christoph; Ralph, Duncan; Roland, Christof; Roland, Gunther; Stephans, George; Stöckli, Fabian; Sumorok, Konstanty; Velicanu, Dragos; Veverka, Jan; Wyslouch, Bolek; Yang, Mingming; Yoon, Sungho; Zanetti, Marco; Zhukova, Victoria; Dahmes, Bryan; De Benedetti, Abraham; Gude, Alexander; Kao, Shih-Chuan; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Pastika, Nathaniel; Rusack, Roger; Singovsky, Alexander; Tambe, Norbert; Turkewitz, Jared; Acosta, John Gabriel; Cremaldi, Lucien Marcus; Kroeger, Rob; Oliveros, Sandra; Perera, Lalith; Sanders, David A; Summers, Don; Avdeeva, Ekaterina; Bloom, Kenneth; Bose, Suvadeep; Claes, Daniel R; Dominguez, Aaron; Fangmeier, Caleb; Gonzalez Suarez, Rebeca; Keller, Jason; Knowlton, Dan; Kravchenko, Ilya; Lazo-Flores, Jose; Malik, Sudhir; Meier, Frank; Monroy, Jose; Snow, Gregory R; Dolen, James; George, Jimin; Godshalk, Andrew; Iashvili, Ia; Jain, Supriya; Kaisen, Josh; Kharchilava, Avto; Kumar, Ashish; Rappoccio, Salvatore; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Chasco, Matthew; Haley, Joseph; Massironi, Andrea; Nash, David; Orimoto, Toyoko; Trocino, Daniele; Wood, Darien; Zhang, Jinzhong; Anastassov, Anton; Hahn, Kristan Allan; Kubik, Andrew; Lusito, Letizia; Mucia, Nicholas; Odell, Nathaniel; Pollack, Brian; Pozdnyakov, Andrey; Schmitt, Michael Henry; Sevova, Stanislava; Stoynev, Stoyan; Sung, Kevin; Trovato, Marco; Velasco, Mayda; Won, Steven; Berry, Douglas; Brinkerhoff, Andrew; Chan, Kwok Ming; Drozdetskiy, Alexey; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kellams, Nathan; Kolb, Jeff; Lannon, Kevin; Luo, Wuming; Lynch, Sean; Marinelli, Nancy; Morse, David Michael; Pearson, Tessa; Planer, Michael; Ruchti, Randy; Slaunwhite, Jason; Valls, Nil; Wayne, Mitchell; Wolf, Matthias; Woodard, Anna; Antonelli, Louis; Bylsma, Ben; Durkin, Lloyd Stanley; Flowers, Sean; Hill, Christopher; Hughes, Richard; Kotov, Khristian; Ling, Ta-Yung; Puigh, Darren; Rodenburg, Marissa; Smith, Geoffrey; Vuosalo, Carl; Winer, Brian L; Wolfe, Homer; Wulsin, Howard Wells; Berry, Edmund; Elmer, Peter; Halyo, Valerie; Hebda, Philip; Hegeman, Jeroen; Hunt, Adam; Jindal, Pratima; Koay, Sue Ann; Lujan, Paul; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Quan, Xiaohang; Raval, Amita; Saka, Halil; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zenz, Seth Conrad; Zuranski, Andrzej; Brownson, Eric; Lopez, Angel; Mendez, Hector; Ramirez Vargas, Juan Eduardo; Alagoz, Enver; Arndt, Kirk; Benedetti, Daniele; Bolla, Gino; Bortoletto, Daniela; Bubna, Mayur; Cervantes, Mayra; De Mattia, Marco; Everett, Adam; Hu, Zhen; Jha, Manoj; Jones, Matthew; Jung, Kurt; Kress, Matthew; Leonardo, Nuno; Lopes Pegna, David; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Radburn-Smith, Benjamin Charles; Shipsey, Ian; Silvers, David; Svyatkovskiy, Alexey; Wang, Fuqiang; Xie, Wei; Xu, Lingshan; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Parashar, Neeti; Stupak, John; Adair, Antony; Akgun, Bora; Ecklund, Karl Matthew; Geurts, Frank JM; Li, Wei; Michlin, Benjamin; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Zabel, James; Betchart, Burton; Bodek, Arie; Covarelli, Roberto; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Ferbel, Thomas; Garcia-Bellido, Aran; Goldenzweig, Pablo; Han, Jiyeon; Harel, Amnon; Miner, Daniel Carl; Petrillo, Gianluca; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Ciesielski, Robert; Demortier, Luc; Goulianos, Konstantin; Lungu, Gheorghe; Malik, Sarah; Mesropian, Christina; Arora, Sanjay; Barker, Anthony; Bartz, Ed; Chou, John Paul; Contreras-Campana, Christian; Contreras-Campana, Emmanuel; Duggan, Daniel; Ferencek, Dinko; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Lath, Amitabh; Panwalkar, Shruti; Park, Michael; Patel, Rishi; Rekovic, Vladimir; Robles, Jorge; Salur, Sevil; Schnetzer, Steve; Seitz, Claudia; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Thomassen, Peter; Walker, Matthew; Rose, Keith; Spanier, Stefan; Yang, Zong-Chang; York, Andrew; Bouhali, Othmane; Eusebi, Ricardo; Flanagan, Will; Gilmore, Jason; Kamon, Teruki; Khotilovich, Vadim; Krutelyov, Vyacheslav; Montalvo, Roy; Osipenkov, Ilya; Pakhotin, Yuriy; Perloff, Alexx; Roe, Jeffrey; Safonov, Alexei; Sakuma, Tai; Suarez, Indara; Tatarinov, Aysen; Toback, David; Akchurin, Nural; Cowden, Christopher; Damgov, Jordan; Dragoiu, Cosmin; Dudero, Phillip Russell; Faulkner, James; Kovitanggoon, Kittikul; Kunori, Shuichi; Lee, Sung Won; Libeiro, Terence; Volobouev, Igor; Appelt, Eric; Delannoy, Andrés G; Greene, Senta; Gurrola, Alfredo; Johns, Willard; Maguire, Charles; Mao, Yaxian; Melo, Andrew; Sharma, Monika; Sheldon, Paul; Snook, Benjamin; Tuo, Shengquan; Velkovska, Julia; Arenton, Michael Wayne; Boutle, Sarah; Cox, Bradley; Francis, Brian; Goodell, Joseph; Hirosky, Robert; Ledovskoy, Alexander; Lin, Chuanzhe; Neu, Christopher; Wood, John; Gollapinni, Sowjanya; Harr, Robert; Karchin, Paul Edmund; Kottachchi Kankanamge Don, Chamath; Lamichhane, Pramod; Belknap, Donald; Borrello, Laura; Carlsmith, Duncan; Cepeda, Maria; Dasu, Sridhara; Duric, Senka; Friis, Evan; Grothe, Monika; Hall-Wilton, Richard; Herndon, Matthew; Hervé, Alain; Klabbers, Pamela; Klukas, Jeffrey; Lanaro, Armando; Levine, Aaron; Loveless, Richard; Mohapatra, Ajit; Ojalvo, Isabel; Palmonari, Francesco; Perry, Thomas; Pierro, Giuseppe Antonio; Polese, Giovanni; Ross, Ian; Sakharov, Alexandre; Sarangi, Tapas; Savin, Alexander; Smith, Wesley H; Woods, Nathaniel

    2014-10-16

    A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For $t\\bar{t}$ events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of $p_T$ > 0.9 GeV is 94% for pseudorapidities of |$\\eta$| < 0.9 and 85% for |$\\eta$| between 0.9 and 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of $p_T$ = 100 GeV emitted at |$\\eta$| lower than 1.4, the resolutions are approximately 2.8% in $p_T$, and respectively, 10 mi...

  6. Development of a Full-Depth Wheel Tracking Test for Asphalt Pavement Structure: Methods and Performance Evaluation

    OpenAIRE

    Hui Wang; Zepeng Fan; Jiupeng Zhang

    2016-01-01

    The rutting performance of asphalt pavement structure relies on the high temperature properties of asphalt mixture as well as the pavement structure and thickness. In order to investigate the influence of the structure and thickness, a full-depth wheel tracking test is developed in this research by improving the conventional wheel tracking test apparatus. The newly proposed test method is capable of varying its load speed and load size, controlling its specimen temperature gradient, and simul...

  7. Evaluation of a BGO-Based PET System for Single-Cell Tracking Performance by Simulation and Phantom Studies

    Directory of Open Access Journals (Sweden)

    Yu Ouyang PhD

    2016-05-01

    Full Text Available A recent method based on positron emission was reported for tracking moving point sources using the Inveon PET system. However, the effect of scanner background noise was not further explored. Here, we evaluate tracking with the Genisys4, a bismuth germanate-based PET system, which has no significant intrinsic background and may be better suited to tracking lower and/or faster activity sources. Position-dependent sensitivity of the Genisys4 was simulated in Geant4 Application for Tomographic Emission (GATE using a static 18F point source. Trajectories of helically moving point sources with varying activity and rotation speed were reconstructed from list-mode data as described previously. Simulations showed that the Inveon’s ability to track sources within 2 mm of localization error is limited to objects with a velocity-to-activity ratio < 0.13 mm/decay, compared to < 0.29 mm/decay for the Genisys4. Tracking with the Genisys4 was then validated using a physical phantom of helically moving [18F] fluorodeoxyglucose-in-oil droplets (< 0.24 mm diameter, 139-296 Bq, yielding < 1 mm localization error under the tested conditions, with good agreement between simulated sensitivity and measured activity (Pearson correlation R = .64, P << .05 in a representative example. We have investigated the tracking performance with the Genisys4, and results suggest the feasibility of tracking low activity, point source-like objects with this system.

  8. Investigating the Mobility of Light Autonomous Tracked Vehicles using a High Performance Computing Simulation Capability

    Science.gov (United States)

    Negrut, Dan; Mazhar, Hammad; Melanz, Daniel; Lamb, David; Jayakumar, Paramsothy; Letherwood, Michael; Jain, Abhinandan; Quadrelli, Marco

    2012-01-01

    This paper is concerned with the physics-based simulation of light tracked vehicles operating on rough deformable terrain. The focus is on small autonomous vehicles, which weigh less than 100 lb and move on deformable and rough terrain that is feature rich and no longer representable using a continuum approach. A scenario of interest is, for instance, the simulation of a reconnaissance mission for a high mobility lightweight robot where objects such as a boulder or a ditch that could otherwise be considered small for a truck or tank, become major obstacles that can impede the mobility of the light autonomous vehicle and negatively impact the success of its mission. Analyzing and gauging the mobility and performance of these light vehicles is accomplished through a modeling and simulation capability called Chrono::Engine. Chrono::Engine relies on parallel execution on Graphics Processing Unit (GPU) cards.

  9. CVFEM for Multiphase Flow with Disperse and Interface Tracking, and Algorithms Performances

    Directory of Open Access Journals (Sweden)

    M. Milanez

    2015-12-01

    Full Text Available A Control-Volume Finite-Element Method (CVFEM is newly formulated within Eulerian and spatial averaging frameworks for effective simulation of disperse transport, deposit distribution and interface tracking. Their algorithms are implemented alongside an existing continuous phase algorithm. Flow terms are newly implemented for a control volume (CV fixed in a space, and the CVs' equations are assembled based on a finite element method (FEM. Upon impacting stationary and moving boundaries, the disperse phase changes its phase and the solver triggers identification of CVs with excess deposit and their neighboring CVs for its accommodation in front of an interface. The solver then updates boundary conditions on the moving interface as well as domain conditions on the accumulating deposit. Corroboration of the algorithms' performances is conducted on illustrative simulations with novel and existing Eulerian and Lagrangian solutions, such as (- other, i. e. external methods with analytical and physical experimental formulations, and (- characteristics internal to CVFEM.

  10. Comparative study of performance of neutral axis tracking based damage detection

    Science.gov (United States)

    Soman, R.; Malinowski, P.; Ostachowicz, W.

    2015-07-01

    This paper presents a comparative study of a novel SHM technique for damage isolation. The performance of the Neutral Axis (NA) tracking based damage detection strategy is compared to other popularly used vibration based damage detection methods viz. ECOMAC, Mode Shape Curvature Method and Strain Flexibility Index Method. The sensitivity of the novel method is compared under changing ambient temperature conditions and in the presence of measurement noise. Finite Element Analysis (FEA) of the DTU 10 MW Wind Turbine was conducted to compare the local damage identification capability of each method and the results are presented. Under the conditions examined, the proposed method was found to be robust to ambient condition changes and measurement noise. The damage identification in some is either at par with the methods mentioned in the literature or better under the investigated damage scenarios.

  11. Tracking Performance Analysis and Simulation of the Digital Pointing System for the Optical Communication Demonstrator

    Science.gov (United States)

    Racho, C.; Portillo, A.

    1998-10-01

    Over the past 3 years, JPL has been heavily engaged in designing and developing a reduced-complexity optical communication terminal for high-data-volume applications. The terminal is called the Optical Communication Demonstrator (OCD) and has the ability to point microradian-level beams with a very small number of detectors and steering elements. Using only a single steering mirror and a charge-coupled device (CCD) detector array, the OCD can accomplish the functions of beacon signal acquisition, beacon tracking, transmit and receive beam coalignment, and transmit beam point-ahead offset. At a higher system level, developing an understanding of the OCD performance is an essential part of achieving a better understanding of the end-to-end optical communication system performance in the field. During the latter half of fiscal year 1998, a series of experiments was conducted between Table Mountain and Strawberry Peak using the OCD as a transmitting terminal for terrestrial ground-to- ground optical link demonstrations. The OCD was taken to Strawberry Peak and set up to receive the multibeam laser beacon from the 0.6-meter telescope located at Table Mountain, a distance of approximately 40 kilometers. In the presence of atmospheric effects, the laser beacon will fluctuate both in intensity and position. The ability to determine the performance of the control loop under atmospheric-induced fades and distortion becomes very important in evaluating the results of the field testing. This article describes the design and performance of the OCD digital control loop system, which includes the steering mirror, the CCD detector array tracker, and the associated electronics. The digital control loop performance is a key factor in the ultimate performance of the laser beacon acquisition and tracking algorithm of the OCD. A model of the OCD digital control loop is developed for use in simulations. The analytical results from control loop simulations are compared with measured data

  12. Tracking performance of a single-crystal and a polycrystalline diamond pixel-detector

    Energy Technology Data Exchange (ETDEWEB)

    Menasce, D.; et al.

    2013-06-01

    We present a comparative characterization of the performance of a single-crystal and a polycrystalline diamond pixel-detector employing the standard CMS pixel readout chips. Measurements were carried out at the Fermilab Test Beam Facility, FTBF, using protons of momentum 120 GeV/c tracked by a high-resolution pixel telescope. Particular attention was directed to the study of the charge-collection, the charge-sharing among adjacent pixels and the achievable position resolution. The performance of the single-crystal detector was excellent and comparable to the best available silicon pixel-detectors. The measured average detection-efficiency was near unity, ε = 0.99860±0.00006, and the position-resolution for shared hits was about 6 μm. On the other hand, the performance of the polycrystalline detector was hampered by its lower charge collection distance and the readout chip threshold. A new readout chip, capable of operating at much lower threshold (around 1 ke$-$), would be required to fully exploit the potential performance of the polycrystalline diamond pixel-detector.

  13. Evaluating Silent Reading Performance with an Eye Tracking System in Patients with Glaucoma

    Science.gov (United States)

    Murata, Noriaki; Fukuchi, Takeo

    2017-01-01

    Objective To investigate the relationship between silent reading performance and visual field defects in patients with glaucoma using an eye tracking system. Methods Fifty glaucoma patients (Group G; mean age, 52.2 years, standard deviation: 11.4 years) and 20 normal controls (Group N; mean age, 46.9 years; standard deviation: 17.2 years) were included in the study. All participants in Group G had early to advanced glaucomatous visual field defects but better than 20/20 visual acuity in both eyes. Participants silently read Japanese articles written horizontally while the eye tracking system monitored and calculated reading duration per 100 characters, number of fixations per 100 characters, and mean fixation duration, which were compared with mean deviation and visual field index values from Humphrey visual field testing (24–2 and 10–2 Swedish interactive threshold algorithm standard) of the right versus left eye and the better versus worse eye. Results There was a statistically significant difference between Groups G and N in mean fixation duration (G, 233.4 msec; N, 215.7 msec; P = 0.010). Within Group G, significant correlations were observed between reading duration and 24–2 right mean deviation (rs = -0.280, P = 0.049), 24–2 right visual field index (rs = -0.306, P = 0.030), 24–2 worse visual field index (rs = -0.304, P = 0.032), and 10–2 worse mean deviation (rs = -0.326, P = 0.025). Significant correlations were observed between mean fixation duration and 10–2 left mean deviation (rs = -0.294, P = 0.045) and 10–2 worse mean deviation (rs = -0.306, P = 0.037), respectively. Conclusions The severity of visual field defects may influence some aspects of reading performance. At least concerning silent reading, the visual field of the worse eye is an essential element of smoothness of reading. PMID:28095478

  14. Preflight assessment of the cross-track infrared sounder (CrIS) performance

    Science.gov (United States)

    Zavyalov, Vladimir V.; Fish, Chad S.; Bingham, Gail E.; Esplin, Mark; Greenman, Mark; Scott, Deron; Han, Yong

    2011-11-01

    The Cross-track Infrared Sounder (CrIS) is a part of the Crosstrack Infrared and Microwave Sounding Suite (CrIMSS) that will be used to produce accurate temperature, water vapor, and pressure profiles on the NPOESS Preparatory Project (NPP) and upcoming Joint Polar Satellite System (JPSS) operational missions. The NPP CrIS flight model has completed sensor qualification, characterization, and calibration and is now integrated with the NPP spacecraft in preparation for the launch. This paper reviews the CrIS performance during thermal vacuum tests, including the spacecraft integration test, and provides a comparison to the AIRS and IASI heritage sensors that it builds upon. The CrIS system consists of the instrument itself and ground-based scientific algorithms. The data reported in this paper was processed with the latest version of the CrIS science sensor data record (SDR) algorithm and thus reflects the performance of the CrIS SDR system. This paper includes the key test results for Noise Equivalent Differential Noise (NEdN), Radiometric Performance, and Spectral Accuracy. The CrIS sensor performance is outstanding and will meet the mission needs for the NPP /JPSS mission. NEdN is one of the key performance tests for the CrIS sensor. The overall NEdN performance for the CrIS in the LWIR, MWIR and SWIR spectral bands is excellent and is comparable or exceeds NEdN performance of AIRS and IASI. Also discussed is the Principal Component Analysis (PCA) approach developed to estimate contribution of random and spectrally correlated noise components to the total NEDN.

  15. Model development and system performance optimization for staring infrared search and track (IRST) sensors

    Science.gov (United States)

    Olson, Craig; Theisen, Michael; Pace, Teresa; Halford, Carl; Driggers, Ronald

    2016-05-01

    The mission of an Infrared Search and Track (IRST) system is to detect and locate (sometimes called find and fix) enemy aircraft at significant ranges. Two extreme opposite examples of IRST applications are 1) long range offensive aircraft detection when electronic warfare equipment is jammed, compromised, or intentionally turned off, and 2) distributed aperture systems where enemy aircraft may be in the proximity of the host aircraft. Past IRST systems have been primarily long range offensive systems that were based on the LWIR second generation thermal imager. The new IRST systems are primarily based on staring infrared focal planes and sensors. In the same manner that FLIR92 did not work well in the design of staring infrared cameras (NVTherm was developed to address staring infrared sensor performance), current modeling techniques do not adequately describe the performance of a staring IRST sensor. There are no standard military IRST models (per AFRL and NAVAIR), and each program appears to perform their own modeling. For this reason, L-3 has decided to develop a corporate model, working with AFRL and NAVAIR, for the analysis, design, and evaluation of IRST concepts, programs, and solutions. This paper provides some of the first analyses in the L-3 IRST model development program for the optimization of staring IRST sensors.

  16. Performance Enhancement of Underwater Target Tracking by Fusing Data of Array of Global Positioning System Sonobuoys

    Directory of Open Access Journals (Sweden)

    Ahmed El-Shafie

    2009-01-01

    Full Text Available Problem statement: An accurate knowledge of geographic positions of sonobuoys is critical for the conduct of antisubmarine warfare operations and detected target localization. Deployed from an airborne platform or a surface vessel, arrays of sonobuoys could be used to efficiently track and localize submarines. Lastly, some sonobuoys were being equipped with GPS for improving system accuracy and potentially allowing networked Sonobuoy positioning. However, the computation of the range using the propagation loss profile and the data of one sonobuoy usually leads to inaccurate target localization due to several effects and uncertainties. It was, alternatively, reported that if the target is within the detection rage of two or more sonobuoys, greatly improved target localization can be achieved. Approach: Aim of this research was to investigate the feasibility of fusing data from a distributed field of GPS sonobuoys to create an Artificial Intelligence (AI based model for the error of the range computation in case of the target being detected by only one sonobuoy. Proposed module was designed utilizing Adaptive Neuron-Fuzzy Inference Systems (ANFIS to estimate the range error associated with the computation using the propagation loss profile when the target is within the detection range of only one sonobuoy. The architecture of the proposed ANFIS system had two unique features. First was the real-time cross-validation applied during the update (training procedure of the ANFIS-based module while the target was detected by two sonobuoys and the range was computed. Second feature was the use of non-overlapping and moving window for the real-time implementation of the ANFIS-based data fusion module. Results: Performance of the proposed system was examined with simulation data considering different scenarios for both the array of GPS sonobuoys and the target. Results showed that the corrected positioning by one sonobuoy is completely following the

  17. Target tracking based on frequency spectrum amplitude

    Institute of Scientific and Technical Information of China (English)

    Guo Huidong; Zhang Xinhua; Xia Zhijun

    2006-01-01

    The amplitude of frequency spectrum can be integrated with probabilistic data association (PDA) to distinguish the target with clutter echoes, especially in low SNR underwater environment. A new target-tracking algorithm is presented which adopts the amplitude of frequency spectrum to improve target tracking in clutter. The probabilistic density distribution of frequency spectrum amplitude is analyzed. By simulation, the results show that the algorithm is superior to PDA. This approach enhances stability for the association probability and increases the performance of target tracking.

  18. Performance Evaluation of Block Acquisition and Tracking Algorithms Using an Open Source GPS Receiver Platform

    Science.gov (United States)

    Ramachandran, Ganesh K.; Akopian, David; Heckler, Gregory W.; Winternitz, Luke B.

    2011-01-01

    Location technologies have many applications in wireless communications, military and space missions, etc. US Global Positioning System (GPS) and other existing and emerging Global Navigation Satellite Systems (GNSS) are expected to provide accurate location information to enable such applications. While GNSS systems perform very well in strong signal conditions, their operation in many urban, indoor, and space applications is not robust or even impossible due to weak signals and strong distortions. The search for less costly, faster and more sensitive receivers is still in progress. As the research community addresses more and more complicated phenomena there exists a demand on flexible multimode reference receivers, associated SDKs, and development platforms which may accelerate and facilitate the research. One of such concepts is the software GPS/GNSS receiver (GPS SDR) which permits a facilitated access to algorithmic libraries and a possibility to integrate more advanced algorithms without hardware and essential software updates. The GNU-SDR and GPS-SDR open source receiver platforms are such popular examples. This paper evaluates the performance of recently proposed block-corelator techniques for acquisition and tracking of GPS signals using open source GPS-SDR platform.

  19. Lower body symmetry and running performance in elite Jamaican track and field athletes.

    Science.gov (United States)

    Trivers, Robert; Fink, Bernhard; Russell, Mark; McCarty, Kristofor; James, Bruce; Palestis, Brian G

    2014-01-01

    In a study of degree of lower body symmetry in 73 elite Jamaican track and field athletes we show that both their knees and ankles (but not their feet) are-on average-significantly more symmetrical than those of 116 similarly aged controls from the rural Jamaican countryside. Within the elite athletes, events ranged from the 100 to the 800 m, and knee and ankle asymmetry was lower for those running the 100 m dashes than those running the longer events with turns. Nevertheless, across all events those with more symmetrical knees and ankles (but not feet) had better results compared to international standards. Regression models considering lower body symmetry combined with gender, age and weight explain 27 to 28% of the variation in performance among athletes, with symmetry related to about 5% of this variation. Within 100 m sprinters, the results suggest that those with more symmetrical knees and ankles ran faster. Altogether, our work confirms earlier findings that knee and probably ankle symmetry are positively associated with sprinting performance, while extending these findings to elite athletes.

  20. Lower body symmetry and running performance in elite Jamaican track and field athletes.

    Directory of Open Access Journals (Sweden)

    Robert Trivers

    Full Text Available In a study of degree of lower body symmetry in 73 elite Jamaican track and field athletes we show that both their knees and ankles (but not their feet are-on average-significantly more symmetrical than those of 116 similarly aged controls from the rural Jamaican countryside. Within the elite athletes, events ranged from the 100 to the 800 m, and knee and ankle asymmetry was lower for those running the 100 m dashes than those running the longer events with turns. Nevertheless, across all events those with more symmetrical knees and ankles (but not feet had better results compared to international standards. Regression models considering lower body symmetry combined with gender, age and weight explain 27 to 28% of the variation in performance among athletes, with symmetry related to about 5% of this variation. Within 100 m sprinters, the results suggest that those with more symmetrical knees and ankles ran faster. Altogether, our work confirms earlier findings that knee and probably ankle symmetry are positively associated with sprinting performance, while extending these findings to elite athletes.

  1. The superior cycling performance of the hydrothermal synthesized carbon-coated ZnO as anode material for zinc-nickel secondary cells

    Science.gov (United States)

    Feng, Zhaobin; Yang, Zhanhong; Huang, Jianhang; Xie, Xiaoe; Zhang, Zheng

    2015-02-01

    Carbon-coated ZnO is synthesized by the hydrothermal method. The X-ray diffraction (XRD), scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray analysis (EDX) tests indicate that carbon is uniformly coated on the surface of the ZnO particle. And the crystal form of ZnO isn't changed. The effects of carbon layer on the electrochemical performances of ZnO have also been investigated by the charge/discharge cycling test, cyclic voltammetry (CV), Tafel polarization curves and electrochemical impedance spectroscope (EIS) tests. The CV curves at different scan rates exhibit that carbon-coated ZnO has the superior reversibility at high scan rate. The charge/discharge cycling tests under different charge/discharge rates show, even if at high-rate, the cycling performance and specific discharge capacity of carbon-coated ZnO are also superior to that of bare ZnO. The Tafel polarization curves and electrochemical impedance spectroscope (EIS) verify that the carbon layer can improve the anti-corrosion and charge-transfer performances of ZnO. The different rate experiments indicate that, compared with the increase of the conductivity, the effect of carbon layer on improving the anti-corrosion performance of ZnO plays a more dominating role in improving the electrochemical performances of ZnO at low charge/discharge rate.

  2. Study of the Tracking Method and Expected Performance of the Silicon Pixel Inner Tracker Applied in BESIII

    CERN Document Server

    Xiu, Qinglei; Li, Weidong; Liu, Huaimin; Ma, Qiumei; Ouyang, Qun; Qin, Zhonghua; Wang, Liangliang; Wu, Linghui; Yuan, Ye; Zhang, Yao

    2015-01-01

    The inner drift chamber of the BESIII is encountering serious aging problem after five year's running. For the first layer, the decrease in gas gain is about 26% from 2009 to 2013. The upgrade of the inner tracking detector has become an urgent problem for the BESIII experiment. An inner tracker using CMOS pixel sensors is an important candidate because of its great advantages on spatial resolution and radiation hardness. In order to carry out a Monte Carlo study on the expected performance, a Geant4-based full simulation for the silicon pixel detector has been implemented. The tracking method combining the silicon pixel inner tracker and outer drift chamber has been studied and a preliminary reconstruction software was developed. The Monte Carlo study shows that the performances including momentum resolution, vertex resolution and the tracking efficiency are significantly improved due to the good spatial resolution and moderate material budget of the silicon pixel detector.

  3. A High Performance Computing Study of a Scalable FISST-Based Approach to Multi-Target, Multi-Sensor Tracking

    Science.gov (United States)

    Hussein, I.; Wilkins, M.; Roscoe, C.; Faber, W.; Chakravorty, S.; Schumacher, P.

    2016-09-01

    Finite Set Statistics (FISST) is a rigorous Bayesian multi-hypothesis management tool for the joint detection, classification and tracking of multi-sensor, multi-object systems. Implicit within the approach are solutions to the data association and target label-tracking problems. The full FISST filtering equations, however, are intractable. While FISST-based methods such as the PHD and CPHD filters are tractable, they require heavy moment approximations to the full FISST equations that result in a significant loss of information contained in the collected data. In this paper, we review Smart Sampling Markov Chain Monte Carlo (SSMCMC) that enables FISST to be tractable while avoiding moment approximations. We study the effect of tuning key SSMCMC parameters on tracking quality and computation time. The study is performed on a representative space object catalog with varying numbers of RSOs. The solution is implemented in the Scala computing language at the Maui High Performance Computing Center (MHPCC) facility.

  4. Tracking Student Achievement in Music Performance: Developing Student Learning Objectives for Growth Model Assessments

    Science.gov (United States)

    Wesolowski, Brian C.

    2015-01-01

    Student achievement growth data are increasingly used for assessing teacher effectiveness and tracking student achievement in the classroom. Guided by the student learning objective (SLO) framework, music teachers are now responsible for collecting, tracking, and reporting student growth data. Often, the reported data do not accurately reflect the…

  5. Tracking Student Achievement in Music Performance: Developing Student Learning Objectives for Growth Model Assessments

    Science.gov (United States)

    Wesolowski, Brian C.

    2015-01-01

    Student achievement growth data are increasingly used for assessing teacher effectiveness and tracking student achievement in the classroom. Guided by the student learning objective (SLO) framework, music teachers are now responsible for collecting, tracking, and reporting student growth data. Often, the reported data do not accurately reflect the…

  6. Development of a Full-Depth Wheel Tracking Test for Asphalt Pavement Structure: Methods and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Hui Wang

    2016-01-01

    Full Text Available The rutting performance of asphalt pavement structure relies on the high temperature properties of asphalt mixture as well as the pavement structure and thickness. In order to investigate the influence of the structure and thickness, a full-depth wheel tracking test is developed in this research by improving the conventional wheel tracking test apparatus. The newly proposed test method is capable of varying its load speed and load size, controlling its specimen temperature gradient, and simulating the support conditions of actual asphalt pavement. The full-depth wheel tracking test based rutting performance evaluation of different asphalt pavement structures indicates that it is not reasonable to explain the rutting performance of asphalt pavement structure from the point of view of single-layer asphalt mixture rutting performance. The developed full-depth wheel tracking test can be used to distinguish rutting performance of different asphalt pavement structures, and two of five typical asphalt pavement structures commonly used in Shanxi Province were suggested for use in practical engineering.

  7. A Green Synthesis of Nanosheet-Constructed Pd Particles in an Ionic Liquid and Their Superior Electrocatalytic Performance.

    Science.gov (United States)

    Zhang, Baohua; Xue, Yiguo; Xue, Zhimin; Li, Zhonghao; Hao, Jingcheng

    2015-12-21

    The ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) is investigated as a solvent for the synthesis of Pd particles. Interestingly, nanosheet-constructed Pd particles could be successfully synthesized in [EMIM]Ac without any additional reducing agent and template under ionothermal conditions. [EMIM]Ac itself works as the solvent, the reducing agent, and the template for the formation of these interesting Pd particles, making this method complementary to the well-known ionic-liquid-precursor approach. Furthermore, [EMIM]Ac can be recycled with no loss of activity for the formation of nanosheet-constructed Pd particles within our studied cycles. Specifically, the nanosheet-constructed Pd particles exhibit superior electrocatalytic activity and stability towards ethanol oxidation and formic acid oxidation compared with commercially available Pd black catalyst, thus demonstrating their promising applications in fuel-cell area. The current approach, thus, presents a green approach towards the synthesis of Pd particles, using only a simple palladium salt and an ionic liquid. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Lead-carbon electrode designed for renewable energy storage with superior performance in partial state of charge operation

    Science.gov (United States)

    Zhang, Wen-Li; Yin, Jian; Lin, Zhe-Qi; Shi, Jun; Wang, Can; Liu, De-Bo; Wang, Yue; Bao, Jin-Peng; Lin, Hai-Bo

    2017-02-01

    Renewable energy storage is a key issue in our modern electricity-powered society. Lead acid batteries (LABs) are operated at partial state of charge in renewable energy storage system, which causes the sulfation and capacity fading of Pb electrode. Lead-carbon composite electrode is a good solution to the sulfation problem of LAB. In this paper, a rice-husk-derived hierarchically porous carbon with micrometer-sized large pores (denoted as RHC) has been used as the component of lead-carbon composite electrode. Scanning electron microscopy was used to characterize the morphology of lead-carbon composite electrode. Electrochemical impedance spectroscopy was used to determine the charge transfer capability of lead-carbon composite electrode. Both full charge-discharge method and charge-discharge method operating at harsh partial state of charge condition have been used to prove the superior energy storage capability of lead-carbon composite electrode. Experiment results prove that the micrometer-sized pores of RHC are beneficial to the construction and stability of lead-carbon composite electrode. Microporous carbon material with high surface area is not suitable for the construction of lead-carbon electrode due to the ruin of lead-carbon structure caused by severe electrochemical hydrogen evolution.

  9. FeS anchored reduced graphene oxide nanosheets as advanced anode material with superior high-rate performance for alkaline secondary batteries

    Science.gov (United States)

    Shangguan, Enbo; Guo, Litan; Li, Fei; Wang, Qin; Li, Jing; Li, Quanmin; Chang, Zhaorong; Yuan, Xiao-Zi

    2016-09-01

    A new nanocomposite formulation of the iron-based anode for alkaline secondary batteries is proposed. For the first time, FeS nanoparticles anchored on reduced graphene oxide (RGO) nanosheets are synthesized via a facile, environmentally friendly direct-precipitation approach. In this nanocomposite, FeS nanoparticles are anchored uniformly and tightly on the surface of RGO nanosheets. As an alkaline battery anode, the FeS@RGO electrode delivers a superior high-rate charge/discharge capability and outstanding cycling stability, even at a condition without any conductive additives and a high electrode loading of ∼40 mg cm-2. At high charge/discharge rates of 5C, 10C and 20C (6000 mA g-1), the FeS@RGO electrode presents a specific capacity of ∼288, 258 and 220 mAh g-1, respectively. Moreover, the FeS@RGO electrode exhibits an admirable long cycling stability with a superior capacity retention of 87.6% for 300 cycles at a charge/discharge rate of 2C. The excellent electrochemical properties of the FeS@RGO electrode can be stemmed from the high specific surface area, peculiar electric conductivity and robust sheet-anchored structure of the FeS@RGO nanocomposite. By virtue of its superior fast charge/discharge properties, the FeS@RGO nanocomposite is suitable as an advanced anode material for high-performance alkaline secondary batteries.

  10. How visual search relates to visual diagnostic performance : a narrative systematic review of eye-tracking research in radiology

    NARCIS (Netherlands)

    van der Gijp, A; Ravesloot, C J; Jarodzka, H; van der Schaaf, M F; van der Schaaf, I C; van Schaik, J P J; ten Cate, Olle

    Eye tracking research has been conducted for decades to gain understanding of visual diagnosis such as in radiology. For educational purposes, it is important to identify visual search patterns that are related to high perceptual performance and to identify effective teaching strategies. This review

  11. Effects of residual motion compensation errors on the performance of airborne along-track interferometric SAR

    Institute of Scientific and Technical Information of China (English)

    Hui ZHANG; Jun HONG; Xiao-lan QIU; Ji-chuan LI; Fang-fang LI; Feng MING

    2016-01-01

    Two approximations, center-beam approximation and reference digital elevation model (DEM) approximation, are used in synthetic aperture radar (SAR) motion compensation procedures. They usually introduce residual motion compensation errors for airborne single-antenna SAR imaging and SAR interferometry. In this paper, we investigate the effects of residual uncompensated motion errors, which are caused by the above two approximations, on the performance of airborne along-track interferometric SAR (ATI-SAR). The residual uncompensated errors caused by center-beam approximation in the absence and in the presence of elevation errors are derived, respectively. Airborne simulation parameters are used to verify the correctness of the analysis and to show the impacts of residual uncompensated errors on the interferometric phase errors for ATI-SAR. It is shown that the interferometric phase errors caused by the center-beam approximation with an accurate DEM could be neglected, while the interferometric phase errors caused by the center-beam approximation with an inaccurate DEM cannot be neglected when the elevation errors exceed a threshold. This research provides theoretical bases for the error source analysis and signal processing of airborne ATI-SAR.

  12. Eye Tracking to Explore the Impacts of Photorealistic 3d Representations in Pedstrian Navigation Performance

    Science.gov (United States)

    Dong, Weihua; Liao, Hua

    2016-06-01

    Despite the now-ubiquitous two-dimensional (2D) maps, photorealistic three-dimensional (3D) representations of cities (e.g., Google Earth) have gained much attention by scientists and public users as another option. However, there is no consistent evidence on the influences of 3D photorealism on pedestrian navigation. Whether 3D photorealism can communicate cartographic information for navigation with higher effectiveness and efficiency and lower cognitive workload compared to the traditional symbolic 2D maps remains unknown. This study aims to explore whether the photorealistic 3D representation can facilitate processes of map reading and navigation in digital environments using a lab-based eye tracking approach. Here we show the differences of symbolic 2D maps versus photorealistic 3D representations depending on users' eye-movement and navigation behaviour data. We found that the participants using the 3D representation were less effective, less efficient and were required higher cognitive workload than using the 2D map for map reading. However, participants using the 3D representation performed more efficiently in self-localization and orientation at the complex decision points. The empirical results can be helpful to improve the usability of pedestrian navigation maps in future designs.

  13. Performance Comparison of Hybrid GA-PSO Based Tuned IMMs for Maneuver Target Tracking

    Directory of Open Access Journals (Sweden)

    Ravi Kumar Jatoth

    2013-11-01

    Full Text Available Target tracking is very important field of research as it has wider applications in defense as well as civilian applications. Kalman filter is generally used for such applications. When the process and measurements are non linear extensions of Kalman filters like Extended Kalman Filter, Unscented Kalman Filters are widely used. UKF can give estimations up to second order characteristics of random process. The target is maneuvering and switching among different models like constant velocity (CV, constant acceleration (CA or constant turn (CT, Interactive Multiple Models (IMM are employed. Implementation of IMM filters for any application is difficult because of initialization of Kalman filter i,e, tuning of filter has to be performed before applying to real time situations. It demands prior estimations of Noise covariance matrices which are left for engineering intuitions. This paper presents the nonlinear state estimation using IMM and tuning of the filter is done using bio-inspired algorithms like PSO GA and Hybrid GA-PSO.

  14. Using Eye Tracking to Assess Reading Performance in Patients with Glaucoma: A Within-Person Study

    Directory of Open Access Journals (Sweden)

    Nicholas D. Smith

    2014-01-01

    Full Text Available Reading is often cited as a demanding task for patients with glaucomatous visual field (VF loss, yet reading speed varies widely between patients and does not appear to be predicted by standard visual function measures. This within-person study aimed to investigate reading duration and eye movements when reading short passages of text in a patient’s worse eye (most VF damage when compared to their better eye (least VF damage. Reading duration and saccade rate were significantly different on average in the worse eye when compared to the better eye (P<0.001 in 14 patients with glaucoma that had median (interquartile range between-eye difference in mean deviation (MD; a standard clinical measure for VF loss of 9.8 (8.3 to 14.8 dB; differences were not related to the size of the difference in MD between eyes. Patients with a more pronounced effect of longer reading duration on their worse eye made a larger proportion of “regressions” (backward saccades and “unknown” EMs (not adhering to expected reading patterns when reading with the worse eye when compared to the better eye. A between-eye study in patients with asymmetric disease, coupled with eye tracking, provides a useful experimental design for exploring reading performance in glaucoma.

  15. Bayesian distributed articulated object tracking using multiple collaborative trackers

    Science.gov (United States)

    Qu, Wei; Schonfeld, Dan

    2007-01-01

    In this paper, we propose two novel articulated object tracking approaches. The Decentralized Articulated Object Tracking approach avoids the common practice of using a high-dimensional joint state representation for articulated object tracking. Instead, it introduces a decentralized scheme and models the inter-part interaction within an innovative Bayesian framework. To handle severe self-occlusions, we further extend the first approach by modeling high-level inter-unit interactions and develop the Hierarchical Articulated Object Tracking algorithm within a consistent hierarchical framework. Preliminary experimental results have demonstrated the superior performance of the proposed approaches for real-world videos sequences.

  16. Study on turning performance of four-track steering vehicles. Effect of traction force and track speed distribution control; Sodashiki sokisha no senkai seino ni kansuru kenkyu. Kudoryoku haibun to sokudo haibun no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Imamura, M.; Watanabe, K.; Kitano, M. [National Defense Academy, Kanagawa (Japan)

    1997-10-01

    The four-track steering vehicles (4TS) is a new type of off-road vehicle which can replace four wheels with track units to improve the mobility on soft terrains. In this paper, the numerical simulations, under the various types of differential and track velocity control systems, are conducted to predict the turning performance and steer ability of the 4TS vehicles. The results of the numerical analysis demonstrate that the differential systems with realistic combined distribution control systems of the track speed is efficient at a small turning radius. 4 refs., 13 figs.

  17. Commercial associative memory performance for applications in track-based triggers at the Large Hadron Collider

    Science.gov (United States)

    Webster, Jordan

    2017-01-01

    Dense track environments in pp collisions at the Large Hadron Collider (LHC) motivate the use of triggers with dedicated hardware for fast track reconstruction. The ATLAS Collaboration is in the process of implementing a Fast Tracker (FTK) trigger upgrade, in which Content Addressable Memories (CAMs) will be used to rapidly match hit patterns with large banks of simulated tracks. The FTK CAMs are produced primarily at the University of Pisa. However, commercial CAM technology is rapidly developing due to applications in computer networking devices. This poster presents new studies comparing FTK CAMs to cutting-edge ternary CAMs developed by Cavium. The comparison is intended to guide the design of future track-based trigger systems for the next Phase at the LHC.

  18. INFLUENCE OF STOCHASTIC NOISE STATISTICS ON KALMAN FILTER PERFORMANCE BASED ON VIDEO TARGET TRACKING

    Institute of Scientific and Technical Information of China (English)

    Chen Ken; Napolitano; Zhang Yun; Li Dong

    2010-01-01

    The system stochastic noises involved in Kalman filtering are preconditioned on being ideally white and Gaussian distributed. In this research,efforts are exerted on exploring the influence of the noise statistics on Kalman filtering from the perspective of video target tracking quality. The correlation of tracking precision to both the process and measurement noise covariance is investigated; the signal-to-noise power density ratio is defined; the contribution of predicted states and measured outputs to Kalman filter behavior is discussed; the tracking precision relative sensitivity is derived and applied in this study case. The findings are expected to pave the way for future study on how the actual noise statistics deviating from the assumed ones impacts on the Kalman filter optimality and degradation in the application of video tracking.

  19. Computerized analysis of coronary artery disease: Performance evaluation of segmentation and tracking of coronary arteries in CT angiograms

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Chuan, E-mail: chuan@umich.edu; Chan, Heang-Ping; Chughtai, Aamer; Kuriakose, Jean; Agarwal, Prachi; Kazerooni, Ella A.; Hadjiiski, Lubomir M.; Patel, Smita; Wei, Jun [Department of Radiology, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2014-08-15

    Purpose: The authors are developing a computer-aided detection system to assist radiologists in analysis of coronary artery disease in coronary CT angiograms (cCTA). This study evaluated the accuracy of the authors’ coronary artery segmentation and tracking method which are the essential steps to define the search space for the detection of atherosclerotic plaques. Methods: The heart region in cCTA is segmented and the vascular structures are enhanced using the authors’ multiscale coronary artery response (MSCAR) method that performed 3D multiscale filtering and analysis of the eigenvalues of Hessian matrices. Starting from seed points at the origins of the left and right coronary arteries, a 3D rolling balloon region growing (RBG) method that adapts to the local vessel size segmented and tracked each of the coronary arteries and identifies the branches along the tracked vessels. The branches are queued and subsequently tracked until the queue is exhausted. With Institutional Review Board approval, 62 cCTA were collected retrospectively from the authors’ patient files. Three experienced cardiothoracic radiologists manually tracked and marked center points of the coronary arteries as reference standard following the 17-segment model that includes clinically significant coronary arteries. Two radiologists visually examined the computer-segmented vessels and marked the mistakenly tracked veins and noisy structures as false positives (FPs). For the 62 cases, the radiologists marked a total of 10191 center points on 865 visible coronary artery segments. Results: The computer-segmented vessels overlapped with 83.6% (8520/10191) of the center points. Relative to the 865 radiologist-marked segments, the sensitivity reached 91.9% (795/865) if a true positive is defined as a computer-segmented vessel that overlapped with at least 10% of the reference center points marked on the segment. When the overlap threshold is increased to 50% and 100%, the sensitivities were 86

  20. What doesn't kill me…: Adversity-related experiences are vital in the development of superior Olympic performance.

    Science.gov (United States)

    Sarkar, Mustafa; Fletcher, David; Brown, Daniel J

    2015-07-01

    Recent research suggests that experiencing some adversity can have beneficial outcomes for human growth and development. The purpose of this paper was to explore the adversities that the world's best athletes encounter and the perceived role that these experiences play in their psychological and performance development. A qualitative design was employed because detailed information of rich quality was required to better understand adversity-related experiences in the world's best athletes. Semi-structured interviews were conducted with 10 Olympic gold medalists from a variety of sports. Inductive thematic analysis was used to analyze the data. The findings indicate that the participants encountered a range of sport- and non-sport adversities that they considered were essential for winning their gold medals, including repeated non-selection, significant sporting failure, serious injury, political unrest, and the death of a family member. The participants described the role that these experiences played in their psychological and performance development, specifically focusing on their resultant trauma, motivation, and learning. Adversity-related experiences were deemed to be vital in the psychological and performance development of Olympic champions. In the future, researchers should conduct more in-depth comparative studies of Olympic athletes' adversity- and growth-related experiences, and draw on existing and alternative theoretical explanations of the growth-performance relationship. For professional practitioners, adversity-related experiences offer potential developmental opportunities if they are carefully and purposely harnessed. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  1. Co-based ternary nanocomposites: synthesis and their superior performances for hydrogenation of p-nitrophenol and adsorption for methyl blue

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Fang-Yuan; Fan, Yan-Ling; Ni, Jing-Jing; Xu, Ting-Ting; Song, Ji-Ming, E-mail: songjm@ahu.edu.cn, E-mail: jiming@ahu.edu.cn [Anhui University, The Key Laboratory of Environment Friendly Polymer Materials of Anhui Province, School of Chemistry & Chemical Engineering (China)

    2016-01-15

    A new kind of Co-based ternary nanocomposites has been obtained via one step without any additional surfactant at zero centigrade degree. Some experimental parameters play crucial roles in determining the morphologies and homogeneity of the final products, such as reaction temperature and the introduction of Na{sub 2}S{sub 2}O{sub 3}·5H{sub 2}O. The samples were characterized by XRD, SEM, TEM, UV–Vis, XPS, and BET. The result reveals that the as-prepared samples are Co{sub 1.29}Ni{sub 1.71}O{sub 4}–Co{sub 3}S{sub 4}–Co{sub 3}O{sub 4} Co-based ternary nanocomposites with an elliptic morphology composed of numerous fold-shaped superthin films (average thickness of ca. 2 nm). Interestingly, the obtained nanocomposites display superior performance for the hydrogenation of p-nitrophenol at room temperature in the presence of NaBH{sub 4}. More importantly, the as-prepared nanocomposites show the huge adsorption capacity for methyl blue at room temperature, reaches 1100 mg g{sup −1}. Graphical Abstract: A kind of new-type Co-based ternary nanocomposites has been obtained via one step without surfactants at zero centigrade degree. The as-prepared nanocomposites display superior performance for the hydrogenation of p-nitrophenol in the presence of NaBH{sub 4} at room temperature.

  2. High Pseudocapacitance in FeOOH/rGO Composites with Superior Performance for High Rate Anode in Li-Ion Battery.

    Science.gov (United States)

    Qi, Hui; Cao, Liyun; Li, Jiayin; Huang, Jianfeng; Xu, Zhanwei; Cheng, Yayi; Kong, Xingang; Yanagisawa, Kazumichi

    2016-12-28

    Capacitive storage has been considered as one type of Li-ion storage with fast faradaic surface redox reactions to offer high power density for electrochemical applications. However, it is often limited by low extent of energy contribution during the charge/discharge process, providing insufficient influences to total capacity of Li-ion storage in electrodes. In this work, we demonstrate a pseudocapacitance predominated storage (contributes 82% of the total capacity) from an in-situ pulverization process of FeOOH rods on rGO (reduced graphene oxide) sheets for the first time. Such high extent of pseudocapacitive storage in the FeOOH/rGO electrode achieves high energy density with superior cycling performance over 200 cycles at different current densities (1135 mAh/g at 1 A/g and 783 mAh/g at 5 A/g). It is further revealed that the in-situ pulverization process is essential for the high pseudocapacitance in this electrode, because it not only produces a porous structure for high exposure of tiny FeOOH crystallites to electrolyte but also maintains stable electrochemical contact during ultrahigh rate charge transfer with high energy density in the battery. The utilization of in-situ pulverization in an Fe-based anode to realize high surface pseudocapacitance with superior performance may inspire future design of electrode structures in Li-ion batteries.

  3. Performance analysis of IMU-augmented GNSS tracking systems for space launch vehicles

    Science.gov (United States)

    Braun, Benjamin; Markgraf, Markus; Montenbruck, Oliver

    2016-06-01

    European space launch operators consider the potential of GNSS (global navigation satellite system) as a promising novel means of localization for the purpose of range safety of launch vehicles like Ariane and Vega, since it is expected that recurring costs are lower and accuracy is higher than currently existing systems like radar tracking. Range safety requires continuous information about the position and velocity of the launch vehicle to quickly detect the occurrence of catastrophic events. However, GNSS outages due, for example, to high jerks at fairing and stage jettisons or other external interferences like (un-)intentional jamming cannot be precluded. The OCAM-G experiment on Ariane 5 flight VA219 has provided evidence that GNSS is capable of providing a highly accurate position and velocity solution during most of the flight, but that outages of several seconds do occur. To increase the continuity of a GNSS-based localization system, it is proposed that the GNSS receiver is augmented by an inertial measurement unit (IMU), which is able to output a position and velocity solution even during GNSS outages. Since these outages are expected to be short, a tactical- or even consumer-grade IMU is expected to be sufficient. In this paper, the minimum IMU performance that is required to bridge outages of up to 10 s, and thereby meeting the accuracy requirements of range safety, is determined by means of a thorough simulation study. The focus of the analysis is on current generation microelectromechanical system (MEMS)-based IMU, which is lightweight, low-cost, available commercially and has reached acceptable maturity in the last decade.

  4. Performance of an image analysis processing system for hen tracking in an environmental preference chamber.

    Science.gov (United States)

    Kashiha, Mohammad Amin; Green, Angela R; Sales, Tatiana Glogerley; Bahr, Claudia; Berckmans, Daniel; Gates, Richard S

    2014-10-01

    Image processing systems have been widely used in monitoring livestock for many applications, including identification, tracking, behavior analysis, occupancy rates, and activity calculations. The primary goal of this work was to quantify image processing performance when monitoring laying hens by comparing length of stay in each compartment as detected by the image processing system with the actual occurrences registered by human observations. In this work, an image processing system was implemented and evaluated for use in an environmental animal preference chamber to detect hen navigation between 4 compartments of the chamber. One camera was installed above each compartment to produce top-view images of the whole compartment. An ellipse-fitting model was applied to captured images to detect whether the hen was present in a compartment. During a choice-test study, mean ± SD success detection rates of 95.9 ± 2.6% were achieved when considering total duration of compartment occupancy. These results suggest that the image processing system is currently suitable for determining the response measures for assessing environmental choices. Moreover, the image processing system offered a comprehensive analysis of occupancy while substantially reducing data processing time compared with the time-intensive alternative of manual video analysis. The above technique was used to monitor ammonia aversion in the chamber. As a preliminary pilot study, different levels of ammonia were applied to different compartments while hens were allowed to navigate between compartments. Using the automated monitor tool to assess occupancy, a negative trend of compartment occupancy with ammonia level was revealed, though further examination is needed.

  5. Decentralized Output Feedback Adaptive NN Tracking Control for Time-Delay Stochastic Nonlinear Systems With Prescribed Performance.

    Science.gov (United States)

    Hua, Changchun; Zhang, Liuliu; Guan, Xinping

    2015-11-01

    This paper studies the dynamic output feedback tracking control problem for stochastic interconnected time-delay systems with the prescribed performance. The subsystems are in the form of triangular structure. First, we design a reduced-order observer independent of time delay to estimate the unmeasured state variables online instead of the traditional full-order observer. Then, a new state transformation is proposed in consideration of the prescribed performance requirement. Using neural network to approximate the composite unknown nonlinear function, the corresponding decentralized output tracking controller is designed. It is strictly proved that the resulting closed-loop system is stable in probability in the sense of uniformly ultimately boundedness and that both transient-state and steady-state performances are preserved. Finally, a simulation example is given, and the result shows the effectiveness of the proposed control design method.

  6. Superior electrochemical performance of sulfur/graphene nanocomposite material for high-capacity lithium-sulfur batteries.

    Science.gov (United States)

    Wang, Bei; Li, Kefei; Su, Dawei; Ahn, Hyojun; Wang, Guoxiu

    2012-06-01

    Sulfur/graphene nanocomposite material has been prepared by incorporating sulfur into the graphene frameworks through a melting process. Field-emission scanning electron microscope analysis shows a homogeneous distribution of sulfur in the graphene nanosheet matrix. The sulfur/graphene nanocomposite exhibits a super-high lithium-storage capacity of 1580 mA h g(-1) and a satisfactory cycling performance in lithium-sulfur cells. The enhancement of the reversible capacity and cycle life could be attributed to the flexible graphene nanosheet matrix, which acts as a conducting medium and a physical buffer to cushion the volume change of sulfur during the lithiation and delithiation process. Graphene-based nanocomposites can significantly improve the electrochemical performance of lithium-sulfur batteries.

  7. Enhancing Electrode Performance by Exsolved Nanoparticles: A Superior Cobalt-Free Perovskite Electrocatalyst for Solid Oxide Fuel Cells.

    Science.gov (United States)

    Yang, Guangming; Zhou, Wei; Liu, Meilin; Shao, Zongping

    2016-12-28

    The successful development of low-cost, durable electrocatalysts for oxygen reduction reaction (ORR) at intermediate temperatures is critical for broad commercialization of solid oxide fuel cells. Here, we report our findings in design, fabrication, and characterization of a cobalt-free SrFe0.85Ti0.1Ni0.05O3-δ cathode decorated with NiO nanoparticles. Exsolved from and well bonded to the parent electrode under well-controlled conditions, the NiO nanoparticles uniformly distributed on the surface of the parent electrode greatly enhance cathode performance, demonstrating ORR activity better than that of the benchmark cobalt-based Ba0.5Sr0.5Co0.8Fe0.2O3-δ. Further, a process for regeneration of the NiO nanoparticles was also developed to mitigate potential performance degradation due to coarsening of NiO particles under practical operating conditions. As a general approach, this exsolution-dissolution of electrocatalytically active nanoparticles on an electrode surface may be applicable to the development of other high-performance cobalt-free cathodes for fuel cells and other electrochemical systems.

  8. Sustained multifocal attentional enhancement of stimulus processing in early visual areas predicts tracking performance.

    Science.gov (United States)

    Störmer, Viola S; Winther, Gesche N; Li, Shu-Chen; Andersen, Søren K

    2013-03-20

    Keeping track of multiple moving objects is an essential ability of visual perception. However, the mechanisms underlying this ability are not well understood. We instructed human observers to track five or seven independent randomly moving target objects amid identical nontargets and recorded steady-state visual evoked potentials (SSVEPs) elicited by these stimuli. Visual processing of moving targets, as assessed by SSVEP amplitudes, was continuously facilitated relative to the processing of identical but irrelevant nontargets. The cortical sources of this enhancement were located to areas including early visual cortex V1-V3 and motion-sensitive area MT, suggesting that the sustained multifocal attentional enhancement during multiple object tracking already operates at hierarchically early stages of visual processing. Consistent with this interpretation, the magnitude of attentional facilitation during tracking in a single trial predicted the speed of target identification at the end of the trial. Together, these findings demonstrate that attention can flexibly and dynamically facilitate the processing of multiple independent object locations in early visual areas and thereby allow for tracking of these objects.

  9. Effects of Attentional Focus and Age on Suprapostural Task Performance and Postural Control

    Science.gov (United States)

    McNevin, Nancy; Weir, Patricia; Quinn, Tiffany

    2013-01-01

    Purpose: Suprapostural task performance (manual tracking) and postural control (sway and frequency) were examined as a function of attentional focus, age, and tracking difficulty. Given the performance benefits often found under external focus conditions, it was hypothesized that external focus instructions would promote superior tracking and…

  10. High-Quality Fe-doped TiO2 films with Superior Visible-Light Performance

    DEFF Research Database (Denmark)

    Su, Ren; Bechstein, Ralf; Kibsgaard, Jakob

    2012-01-01

    We report on high-quality polycrystalline Fe-doped TiO2 (Fe–TiO2) porous films synthesized via one-step electrochemical oxidation. We demonstrate that delicate properties such as the impurity concentration and the microstructure that strongly influence the performance of the material...... for photovoltaic and photocatalysis applications can be controlled by adjusting the electrolyte composition. Compared to Fe-doped TiO2 films prepared with traditional phosphate- or silicate-based electrolytes, our newly synthesised Fe–TiO2 films contain solely Fe dopants, which results in excellent photocatalytic...

  11. Performances of motion tracking enhanced Tomo-PIV on turbulent shear flows.

    Science.gov (United States)

    Novara, Matteo; Scarano, Fulvio

    The motion tracking enhancement technique (MTE) is a recently introduced method to improve the accuracy of tomographic PIV measurements at seeding density higher than currently practiced. The working principle is based on the fact that the particle field and its projections are correlated between the two exposures. Therefore, information from subsequent exposures can be shared within the tomographic reconstruction process of a single object, which largely reduces the energy lost into ghost particles. The study follows a previous work based on synthetic particle images, showing that the MTE technique has an effect similar to that of increasing the number of cameras. In the present analysis, MTE is applied to Tomographic PIV data from two time-resolved experiments on turbulent shear flows: a round jet at Re = 5,000 (facq = 1,000 Hz) and a turbulent boundary layer at the trailing edge of an airfoil (Rec = 370,000) measured at 12,000 Hz. The application of MTE is extended to the case of more than two recordings. The performance is assessed comparing the results from a lowered number of cameras with respect to the full tomographic imaging system. The analysis of the jet flow agrees with the findings of numerical simulations provided the results are scaled taking into account the concept of MTE efficiency based on the volume fraction where ghost-pairs (Elsinga et al. 2010a) are produced. When a large fraction of fluid has uniform motion (stagnant fluid surrounding the jet), only a moderate reduction in ghost intensity is expected by MTE. Nevertheless, a visible recovery of reconstruction quality is observed for the 3-cameras system when MTE is applied making use of 3 recordings. In the turbulent boundary layer, the objective is set to increase the seeding density beyond current practice, and the experiments are performed at approximately 200,000 particles/megapixel. The measurement robustness is monitored with the signal-to-noise ratio S/N for the cross

  12. Performances of motion tracking enhanced Tomo-PIV on turbulent shear flows

    Science.gov (United States)

    Novara, Matteo; Scarano, Fulvio

    2012-04-01

    The motion tracking enhancement technique (MTE) is a recently introduced method to improve the accuracy of tomographic PIV measurements at seeding density higher than currently practiced. The working principle is based on the fact that the particle field and its projections are correlated between the two exposures. Therefore, information from subsequent exposures can be shared within the tomographic reconstruction process of a single object, which largely reduces the energy lost into ghost particles. The study follows a previous work based on synthetic particle images, showing that the MTE technique has an effect similar to that of increasing the number of cameras. In the present analysis, MTE is applied to Tomographic PIV data from two time-resolved experiments on turbulent shear flows: a round jet at Re = 5,000 ( f acq = 1,000 Hz) and a turbulent boundary layer at the trailing edge of an airfoil ( Re c = 370,000) measured at 12,000 Hz. The application of MTE is extended to the case of more than two recordings. The performance is assessed comparing the results from a lowered number of cameras with respect to the full tomographic imaging system. The analysis of the jet flow agrees with the findings of numerical simulations provided the results are scaled taking into account the concept of MTE efficiency based on the volume fraction where ghost- pairs (Elsinga et al. 2010a) are produced. When a large fraction of fluid has uniform motion (stagnant fluid surrounding the jet), only a moderate reduction in ghost intensity is expected by MTE. Nevertheless, a visible recovery of reconstruction quality is observed for the 3-cameras system when MTE is applied making use of 3 recordings. In the turbulent boundary layer, the objective is set to increase the seeding density beyond current practice, and the experiments are performed at approximately 200,000 particles/megapixel. The measurement robustness is monitored with the signal-to-noise ratio S/N for the cross

  13. Modelo de avaliação de desempenho global para instituição de ensino superior Evaluation Model of Global Performance for Higher Education Institutions

    Directory of Open Access Journals (Sweden)

    Henrique Martins Galvão

    2011-12-01

    Full Text Available This study proposes a model to evaluate overall performance for Higher Education Institutions. It is unquestionable the importance of organizations from the education sector for knowledge development and dissemination of information, necessary for the progress of a city, region or country. However, it is necessary to develop tools for planning and management control to monitor organizational performance. In this case, one of the most important tasks is related to the types of information that managers need to monitor and tune the performance of the organization. The proposed evaluation model helps to improve the organizational performance of education institutions, creating higher value in the services offered.Este estudo propõe um modelo de avaliação de desempenho global para instituições de ensino superior. É indiscutível a importância das organizações do setor da educação, decisivas para o progresso de uma cidade, região ou país, por serem indutoras do desenvolvimento do conhecimento e da disseminação da informação. Por isso, torna-se necessário desenvolver, para essas instituições educacionais, instrumentos gerenciais de planejamento e de controle que monitorem o desempenho organizacional. Neste caso, uma das tarefas mais relevantes relaciona-se aos tipos de informações que os gerentes necessitam para monitorar e ajustar o desempenho da organização. O modelo de avaliação proposto contribui para melhorar o desempenho organizacional das instituições de ensino, criando valor superior nos serviços oferecidos.

  14. Performance of the reconstruction of large impact parameter tracks in the ATLAS inner detector

    CERN Document Server

    The ATLAS collaboration

    2017-01-01

    The standard ATLAS track reconstruction is designed for primary charged particles, which are promptly produced from $pp$ collisions. Strict requirements on the transverse and the longitudinal impact parameters are applied to increase the purity of primary charged particle reconstruction while keeping the reconstruction efficiency high and the computation time affordable. A side effect of these criteria is a low efficiency for reconstructing secondary particles originating a significant distance from the interaction point. The addition of a second pass of track reconstruction using left-over hits, and re-optimized requirements on the transverse and longitudinal impact parameters, significantly improves the reconstruction efficiency of tracks emerging from secondary vertices which are significantly displaced from the $pp$ collision position. This dedicated setup has empowered searches for long-lived particles in models beyond the Standard Model, extending their sensitivity to a larger lifetime range, and its pe...

  15. 3D Polyaniline Architecture by Concurrent Inorganic and Organic Acid Doping for Superior and Robust High Rate Supercapacitor Performance.

    Science.gov (United States)

    Gawli, Yogesh; Banerjee, Abhik; Dhakras, Dipti; Deo, Meenal; Bulani, Dinesh; Wadgaonkar, Prakash; Shelke, Manjusha; Ogale, Satishchandra

    2016-02-12

    A good high rate supercapacitor performance requires a fine control of morphological (surface area and pore size distribution) and electrical properties of the electrode materials. Polyaniline (PANI) is an interesting material in supercapacitor context because it stores energy Faradaically. However in conventional inorganic (e.g. HCl) acid doping, the conductivity is high but the morphological features are undesirable. On the other hand, in weak organic acid (e.g. phytic acid) doping, interesting and desirable 3D connected morphological features are attained but the conductivity is poorer. Here the synergy of the positive quality factors of these two acid doping approaches is realized by concurrent and optimized strong-inorganic (HCl) and weak-organic (phytic) acid doping, resulting in a molecular composite material that renders impressive and robust supercapacitor performance. Thus, a nearly constant high specific capacitance of 350 F g(-1) is realized for the optimised case of binary doping over the entire range of 1 A g(-1) to 40 A g(-1) with stability of 500 cycles at 40 A g(-1). Frequency dependant conductivity measurements show that the optimized co-doped case is more metallic than separately doped materials. This transport property emanates from the unique 3D single molecular character of such system.

  16. 3D Polyaniline Architecture by Concurrent Inorganic and Organic Acid Doping for Superior and Robust High Rate Supercapacitor Performance

    Science.gov (United States)

    Gawli, Yogesh; Banerjee, Abhik; Dhakras, Dipti; Deo, Meenal; Bulani, Dinesh; Wadgaonkar, Prakash; Shelke, Manjusha; Ogale, Satishchandra

    2016-02-01

    A good high rate supercapacitor performance requires a fine control of morphological (surface area and pore size distribution) and electrical properties of the electrode materials. Polyaniline (PANI) is an interesting material in supercapacitor context because it stores energy Faradaically. However in conventional inorganic (e.g. HCl) acid doping, the conductivity is high but the morphological features are undesirable. On the other hand, in weak organic acid (e.g. phytic acid) doping, interesting and desirable 3D connected morphological features are attained but the conductivity is poorer. Here the synergy of the positive quality factors of these two acid doping approaches is realized by concurrent and optimized strong-inorganic (HCl) and weak-organic (phytic) acid doping, resulting in a molecular composite material that renders impressive and robust supercapacitor performance. Thus, a nearly constant high specific capacitance of 350 F g‑1 is realized for the optimised case of binary doping over the entire range of 1 A g‑1 to 40 A g‑1 with stability of 500 cycles at 40 A g‑1. Frequency dependant conductivity measurements show that the optimized co-doped case is more metallic than separately doped materials. This transport property emanates from the unique 3D single molecular character of such system.

  17. New Result on Model Reference Robust Control: Tracking Performance Improvement%一种模型参考鲁棒控制的跟踪性能改善

    Institute of Scientific and Technical Information of China (English)

    林岩; 姜旭; 程鹏

    2005-01-01

    This paper considers the tracking performance problem of a model reference robust control (MRRC) for plants with relative degree greater than one. A new algorithm is proposed based on the earlier research. It is shown that by applying a special transformation to the tracking system,the L∞ bound of the tracking error can be achieved even when the high frequency gain is unknown,and both the tracking performance and the control effort can be improved significantly. Furthermore,the strictly positive real (SPR) condition, which is an essential assumption of the earlier design, can be removed.

  18. Are performance-based functional assessments superior to semistructured interviews for enhancing return-to-work outcomes?

    Science.gov (United States)

    Gross, Douglas P; Asante, Alexander K; Miciak, Maxi; Battié, Michele C; Carroll, Linda J; Sun, Ambrose; Mikalsky, Marti; Huellstrung, Rene; Niemeläinen, Riikka

    2014-05-01

    To examine whether use of functional capacity evaluation (FCE) leads to better outcomes for injured workers. Cluster randomized controlled trial conducted with analysis at level of claimant. Rehabilitation facility. Participants included claimants (N=203); of these, 103 were tested with FCE. Data were collected on all claimants undergoing RTW assessment at the facility for musculoskeletal conditions. Participants were predominantly employed (59%) men (73%) with chronic musculoskeletal conditions (median duration, 496d). FCEs are commonly used to identify work abilities and inform return-to-work (RTW) decisions. Therefore, FCE results have important consequences. Clinicians who were trained and experienced in performing FCEs were randomized into 2 groups. One group included 14 clinicians who were trained to conduct a semistructured functional interview; the other group (control group) continued to use standard FCE procedures. Outcomes included RTW recommendations after assessment, functional work level at time of assessment and 1, 3, and 6 months after assessment, and compensation outcomes. Analysis included Mann-Whitney U, chi-square, and t tests. All outcomes were similar between groups, and no statistically or clinically significant differences were observed. Mean differences between groups on functional work levels at assessment and follow-up ranged from 0.1 to 0.3 out of 4 (3%-8% difference, P>.05). Performance-based FCEs did not appear to enhance RTW outcomes beyond information gained from semistructured functional interviewing. Use of functional interviewing has the potential to improve efficiency of RTW assessment without compromising clinical, RTW, or compensation outcomes. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  19. Superior performance of highly flexible solid-state supercapacitor based on the ternary composites of graphene oxide supported poly(3,4-ethylenedioxythiophene)-carbon nanotubes

    Science.gov (United States)

    Zhou, Haihan; Zhai, Hua-Jin; Han, Gaoyi

    2016-08-01

    Ternary composite electrodes based on carbon nanotubes thin films (CNFs)-loaded graphene oxide (GO) supported poly(3,4-ethylenedioxythiophene)- carbon nanotubes (GO/PEDOT-CNTs) have been prepared via a facile one-step electrochemical codeposition method. The effect of long and short CNTs-incorporated composites (GO/PEDOT-lCNTs and GO/PEDOT-sCNTs) on the electrochemical behaviors of the electrodes is investigated and compared. Electrochemical measurements indicate that the incorporation of CNTs effectively improves the electrochemical performances of the GO/PEDOT electrodes. Long CNTs-incorporated GO/PEDOT-lCNTs electrodes have more superior electrochemical behaviors with respect to the short CNTs-incorporated GO/PEDOT-lCNTs electrodes, which can be attributed to the optimized composition and specific microstructures of the former. To verify the feasibility of the prepared composite electrodes for utilization as flexible supercapacitor, a solid-state supercapacitor using the CNFs-loaded GO/PEDOT-lCNTs electrodes is fabricated and tested. The device shows lightweight, ultrathin, and highly flexible features, which also has a high areal and volumetric specific capacitance (33.4 m F cm-2 at 10 mV s-1 and 2.7 F cm-3 at 0.042 A cm-3), superior rate capability, and excellent cycle stability (maintaining 97.5% for 5000 cycles). This highly flexible solid-state supercapacitor has great potential for applications in flexible electronics, roll-up display, and wearable devices.

  20. Thigh and knee circumference, knee-extension strength, and functional performance after fast-track total hip arthroplasty

    DEFF Research Database (Denmark)

    Holm, Bente; Kristensen, Morten Tange; Husted, Henrik;

    2011-01-01

    OBJECTIVE: To (1) quantify changes in knee-extension strength and functional-performance at discharge after fast-track total hip arthroplasty (THA) and (2) investigate whether these changes correlate to changes in thigh and knee circumference (ie, swelling) or pain. DESIGN: A prospective......, descriptive, hypothesis-generating study. SETTING: A special unit for fast-track hip and knee arthroplasty operations at a university hospital. PARTICIPANTS: Twenty-four patients (20 women and 4 men; ages 69 ± 6.1 years) scheduled for primary unilateral THA. METHODS: All patients were evaluated before surgery...... and on the day of hospital discharge. MAIN OUTCOME MEASURES: Knee-extension strength, thigh and knee joint circumference, hip pain, and functional performance (Timed Up & Go, 30-Second Chair Stand, and 10-Meter Walk tests). RESULTS: All investigated variables changed significantly from before to after surgery...

  1. Multivariate nonlinear regression analysis of trajectory tracking performance using force reflecting joystick in chronic stroke-induced hemiparesis.

    Science.gov (United States)

    Feng, Xin; Winters, Jack M

    2011-01-01

    Individualizing a neurorehabilitation training protocol requires understanding the performance of subjects with various capabilities under different task settings. We use multivariate regression to evaluate the performance of subjects with stroke-induced hemiparesis in trajectory tracking tasks using a force-reflecting joystick. A nonlinear effect was consistently shown in both dimensions of force field strength and impairment level for selected kinematic performance measures, with greatest sensitivity at lower force fields. This suggests that the form of a force field may play a different "role" for subjects with various impairment levels, and confirms that to achieve optimized therapeutic benefit, it is necessary to personalize interfaces.

  2. Transverse Diffusivity of Cerebral Parenchyma Predicts Visual Tracking Performance in Relapsing-Remitting Multiple Sclerosis

    Science.gov (United States)

    Warlop, Nele P.; Achten, Eric; Fieremans, Els; Debruyne, Jan; Vingerhoets, Guy

    2009-01-01

    This study investigated the relation between cerebral damage related to multiple sclerosis (MS) and cognitive decline as determined by two classical mental tracking tests. Cerebral damage in 15 relapsing-remitting MS patients was measured by diffusion tensor imaging (DTI). Fractional anisotropy, longitudinal and transverse diffusivity were defined…

  3. Systematic Tracking of Malaysian Primary School Students' ESL Reading Comprehension Performance to Facilitate Instructional Processes

    Science.gov (United States)

    Eng, Lin Siew; Mohamed, Abdul Rashid; Ismail, Shaik Abdul Malik Mohamed

    2016-01-01

    This study was conducted to systematically track and benchmark upper primary school students' ESL reading comprehension ability and subsequently generate data at the micro and macro levels according to individual achievement, school location, gender and ethnicity at the school, district, state and national levels. The main intention of this…

  4. Micro-optics for high-efficiency optical performance and simplified tracking for concentrated photovoltaics (CPV).

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Michael B.; Filatov, Anton; Lentine, Anthony L.; Sweatt, William C.; Nielson, Gregory N.; Okandan, Murat; Jared, Bradley Howell

    2010-02-01

    Micro-optical 5mm lenses in 50mm sub-arrays illuminate arrays of photovoltaic cells with 49X concentration. Fine tracking over {+-}10{sup o} FOV in sub-array allows coarse tracking by meter-sized solar panels. Plastic prototype demonstrated for 400nm < {lambda} < 1600 nm. We have designed a solar collector that will be composed of 50-mm-diameter sub-arrays, each containing {approx}100 5-mm plastic micro-lenses. Each micro-lens illuminates a stack of about four 0.7mm PV cells that collect sunlight from 400nm to 1600 nm with a theoretical efficiency approaching 50%. Each sub-array has internal solar tracking and alignment over a {+-}10{sup o} field, so a large array of sub-arrays only needs to coarsely track the sun. The refractive lenses in the design are thin so the optical transmission can be >90% and the optics will weigh very little. There are other optical properties incorporated in this design that help the photovoltaic cells to operate very efficiently. We are building a pre-prototype system now, and will describe our progress at the conference.

  5. Kinanthropometric Profile and Physical Performance of Athletic Track Events in Relation to Different Runners

    Science.gov (United States)

    Khan, Zamirullah; ahmed, Naseem; Raja, Waseem Hassan

    2016-01-01

    The purpose of this study was to find out kinanthropometric profile of 20 Athletes of middle distance 800 meters, & long distance runners 5000 meters of Track Event of age 17 years were assessed for the present study. The data of athletes was collected at Athletics Summer Camp 2015 in Kashmir region. The athletes having participation of at…

  6. Performances of motion tracking enhanced Tomo-PIV on turbulent shear flows

    NARCIS (Netherlands)

    Novara, M.; Scarano, F.

    2012-01-01

    The motion tracking enhancement technique (MTE) is a recently introduced method to improve the accuracy of tomographic PIV measurements at seeding density higher than currently practiced. The working principle is based on the fact that the particle field and its projections are correlated between th

  7. Coaxial electrospinning of WO3 nanotubes functionalized with bio-inspired Pd catalysts and their superior hydrogen sensing performance

    Science.gov (United States)

    Choi, Seon-Jin; Chattopadhyay, Saptarshi; Kim, Jae Jin; Kim, Sang-Joon; Tuller, Harry L.; Rutledge, Gregory C.; Kim, Il-Doo

    2016-04-01

    Macroporous WO3 nanotubes (NTs) functionalized with nanoscale catalysts were fabricated using coaxial electrospinning combined with sacrificial templating and protein-encapsulated catalysts. The macroporous thin-walled nanotubular structures were obtained by introducing colloidal polystyrene (PS) particles to a shell solution of W precursor and poly(vinylpyrrolidone). After coaxial electrospinning with a core liquid of mineral oil and subsequent calcination, open pores with an average diameter of 173 nm were formed on the surface of WO3 NTs due to decomposition of the PS colloids. In addition, catalytic Pd nanoparticles (NPs) were synthesized using bio-inspired protein cages, i.e., apoferritin, and uniformly dispersed within the shell solution and subsequently on the WO3 NTs. The resulting Pd functionalized macroporous WO3 NTs were demonstrated to be high performance hydrogen (H2) sensors. In particular, Pd-functionalized macroporous WO3 NTs exhibited a very high H2 response (Rair/Rgas) of 17.6 at 500 ppm with a short response time. Furthermore, the NTs were shown to be highly selective for H2 compared to other gases such as carbon monoxide (CO), ammonia (NH3), and methane (CH4). The results demonstrate a new synthetic method to prepare highly porous nanotubular structures with well-dispersed nanoscale catalysts, which can provide improved microstructures for chemical sensing.Macroporous WO3 nanotubes (NTs) functionalized with nanoscale catalysts were fabricated using coaxial electrospinning combined with sacrificial templating and protein-encapsulated catalysts. The macroporous thin-walled nanotubular structures were obtained by introducing colloidal polystyrene (PS) particles to a shell solution of W precursor and poly(vinylpyrrolidone). After coaxial electrospinning with a core liquid of mineral oil and subsequent calcination, open pores with an average diameter of 173 nm were formed on the surface of WO3 NTs due to decomposition of the PS colloids. In addition

  8. A Method for Using Player Tracking Data in Basketball to Learn Player Skills and Predict Team Performance.

    Directory of Open Access Journals (Sweden)

    Brian Skinner

    Full Text Available Player tracking data represents a revolutionary new data source for basketball analysis, in which essentially every aspect of a player's performance is tracked and can be analyzed numerically. We suggest a way by which this data set, when coupled with a network-style model of the offense that relates players' skills to the team's success at running different plays, can be used to automatically learn players' skills and predict the performance of untested 5-man lineups in a way that accounts for the interaction between players' respective skill sets. After developing a general analysis procedure, we present as an example a specific implementation of our method using a simplified network model. While player tracking data is not yet available in the public domain, we evaluate our model using simulated data and show that player skills can be accurately inferred by a simple statistical inference scheme. Finally, we use the model to analyze games from the 2011 playoff series between the Memphis Grizzlies and the Oklahoma City Thunder and we show that, even with a very limited data set, the model can consistently describe a player's interactions with a given lineup based only on his performance with a different lineup.

  9. Fabrication and magnetic-induced aggregation of Fe{sub 3}O{sub 4}–noble metal composites for superior SERS performances

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Zibao; Zhao, Aiwu, E-mail: awzhao@iim.ac.cn; Zhang, Maofeng; Wang, Dapeng; Guo, Hongyan; Tao, Wenyu; Gao, Qian; Mao, Ranran; Liu, Erhu [Chinese Academy of Sciences, Institute of Intelligent Machines (China)

    2013-11-15

    Fe{sub 3}O{sub 4}–noble metal composites were obtained by combining Au, Ag nanoparticles (NPs) with 3-aminopropyltrimethoxysilane-functionalized Fe{sub 3}O{sub 4} NPs. UV–Visible absorption spectroscopy demonstrates the obtained Fe{sub 3}O{sub 4}–noble metal composites inherit the typical surface plasmon resonance bands of Au, Ag at 533 and 453 nm, respectively. Magnetic measurements also indicated that the superparamagnetic Fe{sub 3}O{sub 4}–noble metal composites have excellent magnetic response behavior. A magnetic-induced idea was introduced to change their aggregated states and take full advantage of their surface-enhanced Raman scattering (SERS) performances. Under the induction of an external magnetic field, the bifunctional Fe{sub 3}O{sub 4}–noble metal aggregates exhibit the unique superiority in SERS detection of Rhodamine 6G (R6G), compared with the naturally dispersed Au, Ag NPs. Especially, the detection limit of the Fe{sub 3}O{sub 4}–Ag aggregates for R6G is as low as 10{sup −14} M, and the calculated EF reaches up to 1.2 × 10{sup 6}, which meets the requirements for trace detection of analytes. Furthermore, the superiority could be extended to sensitive detection of other organic molecules, such as 4-mercaptopyridine. This work provides a new insight for active adjustment of the aggregated states of SERS substrates and the optimization of SERS performances.

  10. Performance analysis of active disturbance rejection tracking control for a class of uncertain LTI systems.

    Science.gov (United States)

    Xue, Wenchao; Huang, Yi

    2015-09-01

    The paper considers the tracking problem for a class of uncertain linear time invariant (LTI) systems with both uncertain parameters and external disturbances. The active disturbance rejection tracking controller is designed and the resulting closed-loop system's characteristics are comprehensively studied. In the time-domain, it is proven that the output of closed-loop system can approach its ideal trajectory in the transient process against different kinds of uncertainties by tuning the bandwidth of extended state observer (ESO). In the frequency-domain, different kinds of parameters' influences on the phase margin and the crossover frequency of the resulting control system are illuminated. Finally, the effectiveness and robustness of the controller are verified through the actuator position control system with uncertain parameters and load disturbances in the simulations.

  11. Preflight Assessment of the Cross-track Infrared Sounder (CrIS) Performance

    OpenAIRE

    Zavyalov, Vladimir V.; Fish, Chad S.; Bingham, Gail E.; Esplin, Mark; Greenman, Mark; Scott, Deron; Han, Yong

    2011-01-01

    The Cross-track Infrared Sounder (CrIS) is a part of the Crosstrack Infrared and Microwave Sounding Suite (CrIMSS) that will be used to produce accurate temperature, water vapor, and pressure profiles on the NPOESS Preparatory Project (NPP) and upcoming Joint Polar Satellite System (JPSS) operational missions. The NPP CrIS flight model has completed sensor qualification, characterization, and calibration and is now integrated with the NPP spacecraft in preparation for the launch. This paper r...

  12. Neural Network-Based Adaptive Backstepping Control for Hypersonic Flight Vehicles with Prescribed Tracking Performance

    OpenAIRE

    Zhu Guoqiang; Liu Jinkun

    2015-01-01

    An adaptive neural control scheme is proposed for a class of generic hypersonic flight vehicles. The main advantages of the proposed scheme include the following: (1) a new constraint variable is defined to generate the virtual control that forces the tracking error to fall within prescribed boundaries; (2) RBF NNs are employed to compensate for complex and uncertain terms to solve the problem of controller complexity; (3) only one parameter needs to be updated online at each design step, whi...

  13. Studies on fast timing and high precision tracking performance of Resistive Plate Chamber

    CERN Document Server

    Han, L; The ATLAS collaboration

    2013-01-01

    Resistive plate chambers (RPC), produced in large scales, are widely used as trigger detectors with O(ns) time resolution in high energy and high intensity experiments. To confront the future high experimental frontiers, such as the super-LHC, RPCs equipped with fine-pitch readout strips were tested with 180GeV/c muon at CERN SPS H8 beam line, to assess the viability of using RPCs for both fast timing and high precision tracking trigger.

  14. The Design and Performance of the ZEUS Central Tracking Detector z-by-Timing System

    CERN Document Server

    Bailey, D S; Foster, B; Harnew, N; Heath, G P; Jeffs, M D; Khatri, T; Lancaster, M; Lane, J B; McArthur, I C; McFall, J D; Milborrow, R S; Morgado, C J S; Morrissey, M; Nash, J; Nixon, G; Phillips, D A; Postranecky, M; Quinton, S P H; Shield, P D; Topp-Jørgensen, S; Westlake, G; White, D J; Wilson, F F

    1997-01-01

    The ZEUS Central Tracking Detector utilizes a time difference measurement to provide a fast determination of the z-coordinate of each hit. The z-by-timing measurement is achieved by using a Time-to-Amplitude Converter which has an intrinsic timing resolution of 36 ps, has pipelined readout, and has a multihit capability of 48 ns. In order to maintain the required sub-nanosecond timing accuracy, the technique incorporates an automated self-calibration system. The readout of the z-by-timing data utilizes a fully customized timing control system which runs synchronously with the HERA beam-crossing clock, and a data acquisition system implemented on a network of Transputers. Three dimensional space-points provided by the z-by-timing system are used as input to all three levels of the ZEUS trigger and for offline track reconstruction. The average z-resolution is determined to be 4.4 cm for multi-track events from positron-proton collisions in the ZEUS detector.

  15. Quick-Eye: Examination of Human Performance Characteristics Using Eye Tracking and Manual-Based Control Systems for Monitoring Multiple Displays

    Science.gov (United States)

    2013-03-01

    integration effort to combine eye - tracking technology into a multiple display information system, validation of the resulting system, and results of...studies conducted to determine the performance impact to response time, accuracy, and user workload by using eye - tracking input instead of manual controls to switch control among multiple displays.

  16. Performance Analysis of a Bunch and Track Identifier Prototype (BTI) for the CMS Barrel Muon Drift Chambers; Estudio de las Prestaciones de un Prototipo de Bunch and Track Identifier (BTI) para las Camaras de Deriva de CMS

    Energy Technology Data Exchange (ETDEWEB)

    Puerta Pelayo, J.

    2001-07-01

    This note contains a short description of the first step in the first level trigger applied to the barrel muon drift chambers of CMS: the Bunch and Track Identifier (BTI). The test beam results obtained with a BTI prototype have been also analysed BTI performance for different incidence angles and in presence of external magnetic field has been tested, as well as BTI capability as trigger device and track reconstructor. (Author) 30 refs.

  17. Dimensional heterostructures of 1D CdS/2D ZnIn2S4 composited with 2D graphene: designed synthesis and superior photocatalytic performance.

    Science.gov (United States)

    Tian, Qingyong; Wu, Wei; Liu, Jun; Wu, Zhaohui; Yao, Weijing; Ding, Jin; Jiang, Changzhong

    2017-02-28

    The development of photocatalysts with superior photoactivity and stability for the degradation of organic dyes is very important for environmental remediation. In this study, we have presented a multidimensional (1D and 2D) structured CdS/ZnIn2S4/RGO photocatalyst with superior photocatalytic performance. The CdS/ZnIn2S4 helical dimensional heterostructures (DHS) were prepared via a facile solvothermal synthesis method to facilitate the epitaxial growth of 2D ZnIn2S4 nanosheets on 1D CdS nanowires. Ultrathin 2D ZnIn2S4 nanosheets have grown uniformly and perpendicular to the surface of 1D CdS nanowires. The as-obtained 1D/2D CdS/ZnIn2S4 helical DHS show good photocatalytic properties for malachite green (MG). Subsequently, 2D reduced graphene oxide (RGO) was introduced into the 1D/2D CdS/ZnIn2S4 helical DHS as a co-catalyst. The photoactivity and stability of the CdS/ZnIn2S4/RGO composites are significantly improved after 6 cycles. The enhanced photoactivity can be attributed to the high surface area of RGO, the improved adsorption of organic dyes and the efficient spatial separation of photo-induced charge carriers. The transfer of photo-generated electrons from the interface of CdS and ZnIn2S4 to RGO also restricted the photocorrosion of metal sulfide, suggesting an improved stability of the reused CdS/ZnIn2S4/RGO composited photocatalyst.

  18. How visual search relates to visual diagnostic performance: a narrative systematic review of eye-tracking research in radiology.

    Science.gov (United States)

    van der Gijp, A; Ravesloot, C J; Jarodzka, H; van der Schaaf, M F; van der Schaaf, I C; van Schaik, J P J; Ten Cate, Th J

    2017-08-01

    Eye tracking research has been conducted for decades to gain understanding of visual diagnosis such as in radiology. For educational purposes, it is important to identify visual search patterns that are related to high perceptual performance and to identify effective teaching strategies. This review of eye-tracking literature in the radiology domain aims to identify visual search patterns associated with high perceptual performance. Databases PubMed, EMBASE, ERIC, PsycINFO, Scopus and Web of Science were searched using 'visual perception' OR 'eye tracking' AND 'radiology' and synonyms. Two authors independently screened search results and included eye tracking studies concerning visual skills in radiology published between January 1, 1994 and July 31, 2015. Two authors independently assessed study quality with the Medical Education Research Study Quality Instrument, and extracted study data with respect to design, participant and task characteristics, and variables. A thematic analysis was conducted to extract and arrange study results, and a textual narrative synthesis was applied for data integration and interpretation. The search resulted in 22 relevant full-text articles. Thematic analysis resulted in six themes that informed the relation between visual search and level of expertise: (1) time on task, (2) eye movement characteristics of experts, (3) differences in visual attention, (4) visual search patterns, (5) search patterns in cross sectional stack imaging, and (6) teaching visual search strategies. Expert search was found to be characterized by a global-focal search pattern, which represents an initial global impression, followed by a detailed, focal search-to-find mode. Specific task-related search patterns, like drilling through CT scans and systematic search in chest X-rays, were found to be related to high expert levels. One study investigated teaching of visual search strategies, and did not find a significant effect on perceptual performance. Eye

  19. Framework for performance evaluation of face, text, and vehicle detection and tracking in video: data, metrics, and protocol.

    Science.gov (United States)

    Kasturi, Rangachar; Goldgof, Dmitry; Soundararajan, Padmanabhan; Manohar, Vasant; Garofolo, John; Bowers, Rachel; Boonstra, Matthew; Korzhova, Valentina; Zhang, Jing

    2009-02-01

    Common benchmark data sets, standardized performance metrics, and baseline algorithms have demonstrated considerable impact on research and development in a variety of application domains. These resources provide both consumers and developers of technology with a common framework to objectively compare the performance of different algorithms and algorithmic improvements. In this paper, we present such a framework for evaluating object detection and tracking in video: specifically for face, text, and vehicle objects. This framework includes the source video data, ground-truth annotations (along with guidelines for annotation), performance metrics, evaluation protocols, and tools including scoring software and baseline algorithms. For each detection and tracking task and supported domain, we developed a 50-clip training set and a 50-clip test set. Each data clip is approximately 2.5 minutes long and has been completely spatially/temporally annotated at the I-frame level. Each task/domain, therefore, has an associated annotated corpus of approximately 450,000 frames. The scope of such annotation is unprecedented and was designed to begin to support the necessary quantities of data for robust machine learning approaches, as well as a statistically significant comparison of the performance of algorithms. The goal of this work was to systematically address the challenges of object detection and tracking through a common evaluation framework that permits a meaningful objective comparison of techniques, provides the research community with sufficient data for the exploration of automatic modeling techniques, encourages the incorporation of objective evaluation into the development process, and contributes useful lasting resources of a scale and magnitude that will prove to be extremely useful to the computer vision research community for years to come.

  20. Sensor Network-Based Localization for Continuous Tracking Applications: Implementation and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Franco Davoli

    2008-10-01

    Full Text Available The increasing interest in systems able to provide users with immersive services (e.g., domotics, context-aware applications, and immersive distance learning tools has encouraged the development of cheap and effective platforms aimed at tracking objects and people within a certain space. In this context, wireless sensor networks (WSNs can play a very important role, since specialized sensors can be fruitfully exploited in order to generate/receive signals by means of which the WSN can derive the position of nodes joined to the objects to be tracked. The paper presents an original localization platform that exploits a single-hop WSN, based on a Microchip MCU and a Cypress RF device, to track its moving nodes. Specifically, the nodes of the network are divided into three sets: the first set consists of anchor nodes that, according to the commands from the sink (the central node of the WSN, generate ultrasonic pulses. These pulses are received by the second set of (moving nodes, which estimate the pulse time trip and communicate it to the sink. Finally, the last set is constituted by general purpose nodes that collect any kind of data from the surrounding field. The sink gathers all the data, computes the position of moving nodes, and transfers information to external users on the Internet. The algorithms adopted to manage the network and to localize moving nodes are discussed. A working prototype based upon the hardware platform, software, and protocol described in this paper has been deployed and tested, and some results are shown. Simulation results of the localization system are presented to show system scalability.

  1. Functional and performance tests of the fringe and flexure tracking system for LINC-NIRVANA

    Science.gov (United States)

    Rauch, C.; Eckart, A.; Horrobin, M.; Lindhorst, B.; Rost, S.; Smajić, S.; Straubmeier, C.; Tremou, E.; Wank, I.; Zuther, J.

    2012-07-01

    LINC-NIRVANA is a near-Infrared homothetic, beam combining camera for the Large Binocular Telescope that offers Multi-Conjugate Adaptive Optics wavefront correction and fringe tracking to achieve a time-stable fringe pattern. Therefore, the trajectory of the reference source has to be followed as accurate as possible for a precise point spread function acquisition. The presented measurement campaign shows detector positioning errors exceeding the requirements significantly and indicates that these huge errors arise from the software, while the installed hardware matches the requirements.

  2. Performance Comparison of EKF/UKF/CKF for the Tracking of Ballistic Target

    Directory of Open Access Journals (Sweden)

    Wu Guang-bin

    2012-11-01

    Full Text Available This paper considers three well know nonlinear Kalman Filters for the tracking of a ballistic target. Extended Kalman Filter (EKF, Unscented Kalman Filter (UKF, and the Cubature Kalman Filter (CKF are applied for estimating the position, velocity and the ballistic coefficient of the ballistic target. The theory formulation and computer simulation has been done for the comparison of the three nonlinear Kalman Filters. Results show that all of them can accomplish the estimation task, but the UKF and CKF both have higher accuracy and less computation cost than the EKF.

  3. Superior Light-Harvesting Heteroleptic Ruthenium(II) Complexes with Electron-Donating Antennas for High Performance Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Chen, Wang-Chao; Kong, Fan-Tai; Li, Zhao-Qian; Pan, Jia-Hong; Liu, Xue-Peng; Guo, Fu-Ling; Zhou, Li; Huang, Yang; Yu, Ting; Dai, Song-Yuan

    2016-08-03

    Three heteroleptic polypyridyl ruthenium complexes, RC-41, RC-42, and RC-43, with efficient electron-donating antennas in the ancillary ligands were designed, synthesized, and characterized as sensitizers for dye-sensitized solar cell. All the RC dye sensitizers showed remarkable light-harvesting capacity and broadened absorption range. Significantly, RC-43 obtained the lower energy metal-ligand charge transfer (MLCT) band peaked at 557 nm with a high molar extinction coefficient of 27 400 M(-1) cm(-1). In conjunction with TiO2 photoanode of submicrospheres and iodide-based electrolytes, the DSSCs sensitizing with the RC sensitizers, achieved impressively high short-circuit current density (19.04 mA cm(-2) for RC-41, 19.83 mA cm(-2) for RC-42, and 20.21 mA cm(-2) for RC-43) and power conversion efficiency (10.07% for RC-41, 10.52% for RC-42, and 10.78% for RC-43). The superior performances of RC dye sensitizers were attributed to the enhanced light-harvesting capacity and incident-photon-to-current efficiency (IPCE) caused by the introduction of electron-donating antennas in the ancillary ligands. The interfacial charge recombination/regeneration kinetics and electron lifetime were further evaluated by the electrochemical impedance spectroscopy (EIS) and transient absorption spectroscopy (TAS). These data decisively revealed the dependences on the photovoltaic performance of ruthenium sensitizers incorporating electron-donating antennas.

  4. One-step solvothermal deposition of ZnO nanorod arrays on a wood surface for robust superamphiphobic performance and superior ultraviolet resistance

    Science.gov (United States)

    Yao, Qiufang; Wang, Chao; Fan, Bitao; Wang, Hanwei; Sun, Qingfeng; Jin, Chunde; Zhang, Hong

    2016-01-01

    In the present paper, uniformly large-scale wurtzite-structured ZnO nanorod arrays (ZNAs) were deposited onto a wood surface through a one-step solvothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and differential thermal analysis (DTA). ZNAs with a diameter of approximately 85 nm and a length of approximately 1.5 μm were chemically bonded onto the wood surface through hydrogen bonds. The superamphiphobic performance and ultraviolet resistance were measured and evaluated by water or oil contact angles (WCA or OCA) and roll-off angles, sand abrasion tests and an artificially accelerated ageing test. The results show that the ZNA-treated wood demonstrates a robust superamphiphobic performance under mechanical impact, corrosive liquids, intermittent and transpositional temperatures, and water spray. Additionally, the as-prepared wood sample shows superior ultraviolet resistance. PMID:27775091

  5. One-step solvothermal deposition of ZnO nanorod arrays on a wood surface for robust superamphiphobic performance and superior ultraviolet resistance

    Science.gov (United States)

    Yao, Qiufang; Wang, Chao; Fan, Bitao; Wang, Hanwei; Sun, Qingfeng; Jin, Chunde; Zhang, Hong

    2016-10-01

    In the present paper, uniformly large-scale wurtzite-structured ZnO nanorod arrays (ZNAs) were deposited onto a wood surface through a one-step solvothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and differential thermal analysis (DTA). ZNAs with a diameter of approximately 85 nm and a length of approximately 1.5 μm were chemically bonded onto the wood surface through hydrogen bonds. The superamphiphobic performance and ultraviolet resistance were measured and evaluated by water or oil contact angles (WCA or OCA) and roll-off angles, sand abrasion tests and an artificially accelerated ageing test. The results show that the ZNA-treated wood demonstrates a robust superamphiphobic performance under mechanical impact, corrosive liquids, intermittent and transpositional temperatures, and water spray. Additionally, the as-prepared wood sample shows superior ultraviolet resistance.

  6. N-doped graphene layers encapsulated NiFe alloy nanoparticles derived from MOFs with superior electrochemical performance for oxygen evolution reaction

    Science.gov (United States)

    Feng, Yi; Yu, Xin-Yao; Paik, Ungyu

    2016-01-01

    Water splitting, an efficient approach for hydrogen production, is often hindered by unfavorable kinetics of oxygen evolution reaction (OER). In order to reduce the overpotential, noble metal oxides-based electrocatalysts like RuO2 and IrO2 are usually utilized. However, due to their scarcity, the development of cost-effective non-precious OER electrocatalysts with high efficiency and good stability is urgently required. Herein, we report a facile one-step annealing of metal-organic frameworks (MOFs) strategy to synthesize N-doped graphene layers encapsulated NiFe alloy nanoparticles (NiFe@C). Through tuning the nanoparticle size and calcination temperature, NiFe@C with an average size of around 16 nm obtained at 700 °C exhibits superior OER performance with an overpotential of only 281 mV at 10 mA cm−2 and high durability. The facile synthesis method and excellent electrochemical performance show great potential of NiFe@C in replacing the precious metal-based electrocatalysts in the OER. PMID:27658968

  7. Torque and power-velocity relationships in cycling: relevance to track sprint performance in world-class cyclists.

    Science.gov (United States)

    Dorel, S; Hautier, C A; Rambaud, O; Rouffet, D; Van Praagh, E; Lacour, J-R; Bourdin, M

    2005-11-01

    The aims of the present study were both to describe anthropometrics and cycling power-velocity characteristics in top-level track sprinters, and to test the hypothesis that these variables would represent interesting predictors of the 200 m track sprint cycling performance. Twelve elite cyclists volunteered to perform a torque-velocity test on a calibrated cycle ergometer, after the measurement of their lean leg volume (LLV) and frontal surface area (A(p)), in order to draw torque- and power-velocity relationships, and to evaluate the maximal power (P(max)), and both the optimal pedalling rate (f(opt)) and torque (T(opt)) at which P (max) is reached. The 200 m performances--i.e. velocity (V200) and pedalling rate (f 200)--were measured during international events (REC) and in the 2002 French Track Cycling Championships (NAT). P(max), f(opt), and T(opt) were respectively 1600 +/- 116 W, 129.8 +/- 4.7 rpm and 118.5 +/- 9.8 N . m. P(max) was strongly correlated with T(opt) (p < 0.001), which was correlated with LLV (p < 0.01). V200 was related to P(max) normalized by A(p) (p < or = 0.05) and also to f(opt) (p < 0.01) for REC and NAT. f 200 (155.2 +/- 3, REC; 149 +/- 4.3, NAT) were significantly higher than f(opt) (p < 0.001). These findings demonstrated that, in this population of world-class track cyclists, the optimization of the ratio between P(max) and A(p) represents a key factor of 200 m performance. Concerning the major role also played by f(opt), it is assumed that, considering high values of f 200, sprinters with a high value of optimal pedalling rate (i.e. lower f200-f(opt) difference) could be theoretically in better conditions to maximize their power output during the race and hence performance.

  8. Tracking performance in high multiplicities environment at ALICE arXiv

    CERN Document Server

    INSPIRE-00248142

    In LHC Run 3, ALICE will increase the data taking rate significantly to 50\\,kHz continuous read out of minimum bias Pb-Pb events. This challenges the online and offline computing infrastructure, requiring to process 50 times as many events per second as in Run 2, and increasing the data compression ratio from 5 to 20. Such high data compression is impossible by lossless ZIP-like algorithms, but it must use results from online reconstruction, which in turn requires online calibration. These important online processing steps are the most computing-intense ones, and will use GPUs as hardware accelerators. The new online features are already under test during Run 2 in the High Level Trigger (HLT) online processing farm. The TPC (Time Projection Chamber) tracking algorithm for Run 3 is derived from the current HLT online tracking and is based on the Cellular Automaton and Kalman Filter. HLT has deployed online calibration for the TPC drift time, which needs to be extended to space charge distortions calibration. T...

  9. Preserved implicit mentalizing in schizophrenia despite poor explicit performance: evidence from eye tracking

    Science.gov (United States)

    Roux, Paul; Smith, Pauline; Passerieux, Christine; Ramus, Franck

    2016-01-01

    Schizophrenia has been characterized by an impaired mentalizing. It has been suggested that distinguishing implicit from explicit processes is crucial in social cognition, and only the latter might be affected in schizophrenia. Two other questions remain open: (1) Is schizophrenia characterized by an hypo- or hyper attribution of intentions? (2) Is it characterized by a deficit in the attribution of intention or of contingency? To test these three questions, spontaneous mentalizing was tested in 29 individuals with schizophrenia and 29 control subjects using the Frith-Happé animations, while eye movements were recorded. Explicit mentalizing was measured from participants’ verbal descriptions and was contrasted with implicit mentalizing measured through eye tracking. As a group, patients made less accurate and less intentional descriptions of the goal-directed and theory of mind animations. No group differences were found in the attribution of contingency. Eye tracking results revealed that patients and controls showed a similar modulation of eye movements in response to the mental states displayed in the Frith-Happé animations. To conclude, in this paradigm, participants with schizophrenia showed a dissociation between explicit and implicit mentalizing, with a decrease in the explicit attribution of intentions, whereas their eye movements suggested a preserved implicit perception of intentions. PMID:27703225

  10. Carboplatin plus pemetrexed offers superior cost-effectiveness compared to pemetrexed in patients with advanced non-small cell lung cancer and performance status 2.

    Science.gov (United States)

    Schluckebier, Luciene; Garay, Osvaldo U; Zukin, Mauro; Ferreira, Carlos G

    2015-09-01

    Pemetrexed plus carboplatin offers survival advantage in first line treatment of advanced lung cancer patients with performance status of 2. We estimated the cost-effectiveness of this combined regimen compared to pemetrexed alone in a Brazilian population. A cost-effectiveness analysis was conducted based on a randomized phase III trial in patients with advanced non-small cell lung cancer (NSCLC) and ECOG performance status of 2 (PS2), comparing doublet regimen pemetrexed plus carboplatin with pemetrexed alone. The perspective adopted was the public health care sector over a three-year period. Direct medical costs and survival time were calculated from patient-level data and utility values were extracted from the literature. Sensitivity analyses were performed to evaluate uncertainties in the results. The combined regimen pemetrexed plus carboplatin yielded a gain of 0.16 life year (LY) and 0.12 quality-adjusted life year (QALY) compared to pemetrexed alone. The total cost was 17,674.31 USD for the combined regimen and 15,722.39 USD for pemetrexed alone. The incremental cost-effectiveness ratio (ICER) was $12,016.09 per LY gained and $15,732.05 per QALY gained. The factors with the greatest impact on the ICER are pemetrexed price and the time to progression utility value. The cost-effectiveness acceptability curve showed an upper 90% probability of pemetrexed plus carboplatin being cost-effective with a threshold between two and three GDP per capita. Our study suggests superiority of the combined pemetrexed plus carboplatin regimen in terms of efficacy as well as cost-effectiveness in advanced NSCLC patients with a poor performance status of 2. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  11. Sustainability Performance of Scandinavian Corporations and their Value Chains assessed by UN Global Compact and Global Reporting Initiative standards - a way to identify superior performers?

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2014-01-01

    Strategies & Policies, Management Systems, Monitoring and Evaluation Mechanisms and Key Outcomes on sustainability defined broadly as the Human Rights, Labour, Environment and Anti-Corruption issues by the UN Global Compact. The study firmly concludes that Scandinavian corporations on average......The purpose of this study was to introduce a combination of the two most adopted multi- stakeholder standards for sustainability reporting as an alternate framework for assessing sustainability performance in Scandinavian corporations. This novel approach leverages numeric measures on the criteria...... are not performing on higher levels concerning their implementation of these issues. The generalization of the results is moderated by the study's limitations concerning the framework and data sources used, sample size and the indirect use of GRI indicators. The uniqueness of the sustainability practice by two...

  12. 78 FR 21116 - Superior Supplier Incentive Program

    Science.gov (United States)

    2013-04-09

    ... Department of the Navy Superior Supplier Incentive Program AGENCY: Department of the Navy, DoD. ACTION... policy that will establish a Superior Supplier Incentive Program (SSIP). Under the SSIP, contractors that..., performance, quality, and business relations would be granted Superior Supplier Status (SSS). Contractors...

  13. A Real-Time High Performance Computation Architecture for Multiple Moving Target Tracking Based on Wide-Area Motion Imagery via Cloud and Graphic Processing Units

    Directory of Open Access Journals (Sweden)

    Kui Liu

    2017-02-01

    Full Text Available This paper presents the first attempt at combining Cloud with Graphic Processing Units (GPUs in a complementary manner within the framework of a real-time high performance computation architecture for the application of detecting and tracking multiple moving targets based on Wide Area Motion Imagery (WAMI. More specifically, the GPU and Cloud Moving Target Tracking (GC-MTT system applied a front-end web based server to perform the interaction with Hadoop and highly parallelized computation functions based on the Compute Unified Device Architecture (CUDA©. The introduced multiple moving target detection and tracking method can be extended to other applications such as pedestrian tracking, group tracking, and Patterns of Life (PoL analysis. The cloud and GPUs based computing provides an efficient real-time target recognition and tracking approach as compared to methods when the work flow is applied using only central processing units (CPUs. The simultaneous tracking and recognition results demonstrate that a GC-MTT based approach provides drastically improved tracking with low frame rates over realistic conditions.

  14. A Real-Time High Performance Computation Architecture for Multiple Moving Target Tracking Based on Wide-Area Motion Imagery via Cloud and Graphic Processing Units.

    Science.gov (United States)

    Liu, Kui; Wei, Sixiao; Chen, Zhijiang; Jia, Bin; Chen, Genshe; Ling, Haibin; Sheaff, Carolyn; Blasch, Erik

    2017-02-12

    This paper presents the first attempt at combining Cloud with Graphic Processing Units (GPUs) in a complementary manner within the framework of a real-time high performance computation architecture for the application of detecting and tracking multiple moving targets based on Wide Area Motion Imagery (WAMI). More specifically, the GPU and Cloud Moving Target Tracking (GC-MTT) system applied a front-end web based server to perform the interaction with Hadoop and highly parallelized computation functions based on the Compute Unified Device Architecture (CUDA©). The introduced multiple moving target detection and tracking method can be extended to other applications such as pedestrian tracking, group tracking, and Patterns of Life (PoL) analysis. The cloud and GPUs based computing provides an efficient real-time target recognition and tracking approach as compared to methods when the work flow is applied using only central processing units (CPUs). The simultaneous tracking and recognition results demonstrate that a GC-MTT based approach provides drastically improved tracking with low frame rates over realistic conditions.

  15. A Real-Time High Performance Computation Architecture for Multiple Moving Target Tracking Based on Wide-Area Motion Imagery via Cloud and Graphic Processing Units

    Science.gov (United States)

    Liu, Kui; Wei, Sixiao; Chen, Zhijiang; Jia, Bin; Chen, Genshe; Ling, Haibin; Sheaff, Carolyn; Blasch, Erik

    2017-01-01

    This paper presents the first attempt at combining Cloud with Graphic Processing Units (GPUs) in a complementary manner within the framework of a real-time high performance computation architecture for the application of detecting and tracking multiple moving targets based on Wide Area Motion Imagery (WAMI). More specifically, the GPU and Cloud Moving Target Tracking (GC-MTT) system applied a front-end web based server to perform the interaction with Hadoop and highly parallelized computation functions based on the Compute Unified Device Architecture (CUDA©). The introduced multiple moving target detection and tracking method can be extended to other applications such as pedestrian tracking, group tracking, and Patterns of Life (PoL) analysis. The cloud and GPUs based computing provides an efficient real-time target recognition and tracking approach as compared to methods when the work flow is applied using only central processing units (CPUs). The simultaneous tracking and recognition results demonstrate that a GC-MTT based approach provides drastically improved tracking with low frame rates over realistic conditions. PMID:28208684

  16. The bounds on tracking performance utilising a laser-based linear and angular sensing and measurement methodology for micro/nano manipulation

    OpenAIRE

    Clark, Leon; Shirinzadeh, Bijan; Tian, Yanling; Zhong, Yongmin

    2014-01-01

    This paper presents an analysis of the tracking performance of a planar three degrees of freedom (DOF) flexure-based mechanism for micro/nano manipulation, utilising a tracking methodology for the measurement of coupled linear and angular motions. The methodology permits trajectories over a workspace with large angular range through the reduction of geometric errors. However, when combining this methodology with feedback control systems, the accuracy of performed manipulations can only be sta...

  17. Surgery-induced changes and early recovery of hip-muscle strength, leg-press power, and functional performance after fast-track total hip arthroplasty

    DEFF Research Database (Denmark)

    Holm, Bente; Thorborg, Kristian; Husted, Henrik

    2013-01-01

    By measuring very early changes in muscle strength and functional performance after fast-track total hip arthroplasty (THA), post-operative rehabilitation, introduced soon after surgery, can be designed to specifically target identified deficits.......By measuring very early changes in muscle strength and functional performance after fast-track total hip arthroplasty (THA), post-operative rehabilitation, introduced soon after surgery, can be designed to specifically target identified deficits....

  18. Neural Network-Based Adaptive Backstepping Control for Hypersonic Flight Vehicles with Prescribed Tracking Performance

    Directory of Open Access Journals (Sweden)

    Zhu Guoqiang

    2015-01-01

    Full Text Available An adaptive neural control scheme is proposed for a class of generic hypersonic flight vehicles. The main advantages of the proposed scheme include the following: (1 a new constraint variable is defined to generate the virtual control that forces the tracking error to fall within prescribed boundaries; (2 RBF NNs are employed to compensate for complex and uncertain terms to solve the problem of controller complexity; (3 only one parameter needs to be updated online at each design step, which significantly reduces the computational burden. It is proved that all signals of the closed-loop system are uniformly ultimately bounded. Simulation results are presented to illustrate the effectiveness of the proposed scheme.

  19. Influence of Track Irregularity on Longitudinal Vibration of Wheelset and Correlation Performance

    Institute of Scientific and Technical Information of China (English)

    Ma Weihua; Luo Shihui; Song Rongrong

    2006-01-01

    Longitudinal vibration of wheelset with respect to bogie frame often exists with a high acceleration magnitude and relative high frequency. First, a simplified model with a single wheelset moving at a constant speed on a tangential track with irregularity is used to investigate the longitudinal vibration dynamics. Computational results indicate that the longitudinal vibration frequency of the wheelset is most sensitive to the primary longitudinal stiffness and the mass of the wheelset. As to the locomotive model, the longitudinal vibration is concerned with cross-level irregularity and vertical profile irregularity. Meanwhile, a method to estimate the resonance speed is presented. Finally, a possible solution is brought forward to extend wheel-rail service life by eliminating longitudinal vibration of the wheelset. The solution is simply to arrang the primary vertical damper with a forward angle, so that its damping component can be applied to longitudinal direction.

  20. Changes in Muscle Architecture, Explosive Ability, and Track and Field Throwing Performance Throughout a Competitive Season and Following a Taper.

    Science.gov (United States)

    Bazyler, Caleb D; Mizuguchi, Satoshi; Harrison, Alex P; Sato, Kimitake; Kavanaugh, Ashley A; DeWeese, Brad H; Stone, Michael H

    2016-08-26

    The purpose of this study was to examine the effects of an overreach and taper on measures of muscle architecture, jumping, and throwing performance in Division I collegiate throwers preparing for conference championships. Six collegiate track and field throwers (3 hammer, 2 discus, 1 javelin) trained for 12 weeks using a block-periodization model culminating with a one week overreach followed by a 3 week taper (ORT). Session rating of perceived exertion training load (RPETL) and strength training volume-load times bar displacement (VLd) were recorded weekly. Athletes were tested pre- and post-ORT on measures of vastus lateralis architecture, unloaded and loaded squat and countermovement jump performance, underhand and overhead throwing performance, and competition throwing performance. There was a statistical reduction in weight training VLd/session (d=1.21, p<0.05) and RPETL/session (d=0.9, p<0.05) between the in-season and ORT training phases. Five of six athletes improved overhead throw and competition throwing performance following the ORT (d=0.50, p<0.05). Vastus lateralis muscle thickness statistically increased following the in-season training phase (d=0.28, p<0.05), but did not change following the ORT. Unloaded countermovement jump peak force and relative peak power improved significantly following the ORT (d=0.59, p<0.05, d=0.31, p<0.05, respectively). These findings demonstrate that an overreaching week followed by a 3-week taper is an effective means of improving explosive ability and throwing performance in collegiate track and field throwers despite the absence of detectable changes in muscle architecture.

  1. Performance on the American Board of Family Medicine (ABFM) certification examination: are superior test-taking skills alone sufficient to pass?

    Science.gov (United States)

    O'Neill, Thomas R; Royal, Kenneth D; Puffer, James C

    2011-01-01

    Certification examinations used by American specialty boards have been the sine qua non for demonstrating the knowledge sufficient for attainment of board certification in the United States for more than 75 years. Some people contend that the examination is predominantly a test of superior test-taking skills rather than of family medicine decision-making ability. In an effort to explore the validity of this assertion, we administered the American Board of Family Medicine (ABFM) Certification to examinees who had demonstrated proficiency in taking standardized tests but had limited medical knowledge. Four nonphysician experts in the field of measurement and testing were administered one version of the 2009 ABFM certification examination. Scaled scores were calculated for each examinee, and psychometric analyses were performed on the examinees responses to examination items and compared with the performance of physicians who took the same examination. The minimum passing threshold for the examination was a scaled score of 390, corresponding to 57.7% to 61.0% of questions answered correctly, depending on the version of the examination. The 4 nonphysician examinees performed poorly, with scaled scores that ranged from 20 to 160 (mean, 87.5; SD, 57.4). The number of questions answered correctly ranged from 24.0% to 35.1% (mean, 29.2%; SD, 0.05%). Rasch analyses of the examination items revealed that the nonphysician examinees were more likely to use guessing strategies in an effort to answer questions correctly. Distracter analysis suggest near-complete randomness in the nonphysician responses. Though all 4 nonphysician examinees performed better than would have been predicted by chance alone, none performed well enough to even fall within 8 SE below the passing thresholds; their performance was far below that of almost all physicians who completed the examination. Given that the nonphysicians relied heavily on the identifying cues in the phrasing of items and the

  2. Performance of free-space laser communication systems as a function of the sampling rate in the tracking loop

    Science.gov (United States)

    Nikulin, V.; Sofka, J.; Khandekar, R.

    2005-08-01

    Laser technology plays an ever-increasing role in aerospace and communication systems and is often viewed as a technology that has the potential for providing the material base for high-bandwidth applications. Laser provides the most logical connectivity channel for mobile systems requiring high data rates, low power consumption, covert operation, and high resistance to jamming. While advancements in modern opto-electronics have resulted in small size, reliable and power efficient lasers and modulators, successful operation of any communication technology hinges upon the ability to develop an equally advanced beam steering/positioning system. In many aerospace applications, when the transmitting optical platform is placed on board of an airplane, the ability to track the target is affected by the complex high-speed maneuvers performed by the aircraft and the resident vibration of the airframe. The tracking system must assure that in spite of the relative motion of both the transmitting and receiving stations and adverse environments, such as vibration, mutual alignment of two systems will be maintained to minimize communication errors. The work presented in this paper concentrates on the development of agile beam steering systems for laser communication terminals. Acousto-optic Bragg cells are used as deflectors while feedback information is generated by a quadrant detector. The control system is synthesized using a relatively simple constant-gain controller augmented with an adaptive Kalman filter to mitigate the effects of measurement noise in the tracking system. Laboratory experiments are conducted to investigate communication performance as a function of the sampling rate in the beam position feedback.

  3. Performance assessment requirements for the identification and tracking of transuranic waste intended for disposal at the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Snider, C.A. [Department of Energy, Carlsbad, NM (United States); Weston, W.W. [Westinghouse Electric Corp., Carlsbad, NM (United States)

    1997-11-01

    To demonstrate compliance with environmental radiation protection standards for management and disposal of transuranic (TRU) radioactive wastes, a performance assessment (PA) of the Waste Isolation Pilot Plant (WIPP) was made of waste-waste and waste-repository interactions and impacts on disposal system performance. An estimate of waste components and accumulated quantities was derived from a roll-up of the generator/storage sites` TRU waste inventories. Waste components of significance, and some of negligible effect, were fixed input parameters in the model. The results identified several waste components that require identification and tracking of quantities to ensure that repository limits are not exceeded. The rationale used to establish waste component limits based on input estimates is discussed. The distinction between repository limits and waste container limits is explained. Controls used to ensure that no limits are exceeded are identified. For waste components with no explicit repository based limits, other applicable limits are contained in the WIPP Waste Acceptance Criteria (WAC). The 10 radionuclides targeted for identification and tracking on either a waste container or a waste stream basis include Am-241, Pu-238, Pu-239, Pu-240, Pu-242, U-233, U-234, U-238, Sr-90, and Cs-137. The accumulative activities of these radionuclides are to be inventoried at the time of emplacement in the WIPP. Changes in inventory curie content as a function of radionuclide decay and ingrowth over time will be calculated and tracked. Due to the large margin of compliance demonstrated by PA with the 10,000 year release limits specified, the quality assurance objective for radioassay of the 10 radionuclides need to be no more restrictive than those already identified for addressing the requirements imposed by transportation and WIPP disposal operations in Section 9 of the TRU Waste Characterization Quality Assurance Program Plan. 6 refs.

  4. Solvothermal Synthesis of Hierarchical TiO2 Microstructures with High Crystallinity and Superior Light Scattering for High-Performance Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Li, Zhao-Qian; Mo, Li-E; Chen, Wang-Chao; Shi, Xiao-Qiang; Wang, Ning; Hu, Lin-Hua; Hayat, Tasawar; Alsaedi, Ahmed; Dai, Song-Yuan

    2017-09-20

    In this article, hierarchical TiO2 microstructures (HM-TiO2) were synthesized by a simple solvothermal method adopting tetra-n-butyl titanate as the titanium source in a mixed solvent composed of N,N-dimethylformamide and acetic acid. Due to the high crystallinity and superior light-scattering ability, the resultant HM-TiO2 are advantageous as photoanodes for dye-sensitized solar cells. When assembled to the entire photovoltaic device with C101 dye as a sensitizer, the pure HM-TiO2-based solar cells showed an ultrahigh photovoltage up to 0.853 V. Finally, by employing the as-obtained HM-TiO2 as the scattering layer and optimizing the architecture of dye-sensitized solar cells, both higher photovoltage and incident photon-to-electron conversion efficiency value were harvested with respect to TiO2 nanoparticles-based dye-sensitized solar cells, resulting in a high power conversion efficiency of 9.79%. This work provides a promising strategy to develop photoanode materials with outstanding photoelectric conversion performance.

  5. Y and Ni Co-Doped BaZrO3 as a Proton-Conducting Solid Oxide Fuel Cell Electrolyte Exhibiting Superior Power Performance

    KAUST Repository

    Shafi, Shahid P.

    2015-10-16

    The fabrication of anode supported single cells based on BaZr0.8Y0.2O3-δ (BZY20) electrolyte is challenging due to its poor sinteractive nature. The acceleration of shrinkage behavior, improved sinterability and larger grain size were achieved by the partial substitution of Zr with Ni in the BZY perovskite. Phase pure Ni-doped BZY powders of nominal compositions BaZr0.8-xY0.2NixO3-δ were synthesized up to x = 0.04 using a wet chemical combustion synthesis route. BaZr0.76Y0.2Ni0.04O3-δ (BZYNi04) exhibited adequate total conductivity and the open circuit voltage (OCV) values measured on the BZYNi04 pellet suggested lack of significant electronic contribution. The improved sinterability of BZYNi04 assisted the ease in film fabrication and this coupled with the application of an anode functional layer and a suitable cathode, PrBaCo2O5+δ (PBCO), resulted in a superior fuel cell power performance. With humidified hydrogen and static air as the fuel and oxidant, respectively, a peak power density value of 428 and 240 mW cm−2 was obtained at 700 and 600°C, respectively.

  6. A comparison of Nannochloropsis salina growth performance in two outdoor pond designs: conventional raceways versus the ARID pond with superior temperature management

    Energy Technology Data Exchange (ETDEWEB)

    Crowe, Braden J.; Attalah, Said; Agrawal, Shweta; Waller, Peter; Ryan, Randy; Van Wagenen, Jonathan M.; Chavis, Aaron R.; Kyndt, John; Kacira, Murat; Ogden, Kimberly L.; Huesemann, Michael H.

    2012-10-01

    The present study examines how climatic conditions and pond design affect the growth performance of microalgae. From January to April of 2011, outdoor batch cultures of Nannochloropsis salina were grown in three replicate 780 L conventional raceways, as well as in an experimental 7500 L ARID (Algae Raceway Integrated Design) pond. The ARID culture system utilizes a series of 8 to 20 cm deep basins and a 1.5 m deep canal to enhance light exposure and mitigate temperature variations and extremes. The ARID culture reached the stationary phase 27 days earlier than the conventional raceways, which can be attributed to its superior temperature management and shallower basins. On a night when the air temperature dropped to -9 °C, the water temperature was 18 °C higher in the ARID pond than in the conventional raceways. Lipid and fatty acid content ranged from 16 - 25 % and 5 - 15 %, respectively, as a percentage of AFDW. Palmitic, palmitoleic, and eicosapentaenoic acid comprised the majority of fatty acids. While the ARID culture system achieved nearly double the volumetric productivity relative to the conventional raceways (0.023 vs 0.013 g L-1day-1), areal biomass productivities were of similar magnitude in both pond systems (3.34 vs. 3.47 g m-2day-1), suggesting that the ARID pond design has to be further optimized, most likely by increasing the culture depth or operating at higher cell densities while maintaining adequate mixing.

  7. Facilities Performance Indicators Report 2012-13: Tracking Your Facilities Vital Signs

    Science.gov (United States)

    APPA: Association of Higher Education Facilities Officers, 2014

    2014-01-01

    This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance Indicators Report" is designed for survey…

  8. Intermodal Freight Transport on the Right Track?: Environmental and economic performances and their trade-off

    NARCIS (Netherlands)

    Kim, N.S.

    2010-01-01

    This dissertation aims to evaluate environmental and economic performances of an intermodal freight transport system and to estimate the trade-off between CO2 emissions, wich is epresented as an indicator of environmental performance, and freight costs, which ndicate the economic performance of the

  9. Core–shell structure carbon coated ferric oxide (Fe{sub 2}O{sub 3}@C) nanoparticles for supercapacitors with superior electrochemical performance

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Yipeng [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Zhang, Haiyan [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Chen, Yiming, E-mail: chenym@gdut.edu.cn [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Deng, Peng; Huang, Zhikun [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Liu, Liying; Qian, Yannan; Li, Yunyong [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Li, Qingyu [School of Chemistry and Chemistry Engineering, Guangxi Normal University, Guilin 541004 (China)

    2015-08-05

    Highlights: • Fe{sub 2}O{sub 3}@C was prepared by using arc discharge method followed by heat treatment. • KOH activation made the core–shell structure Fe{sub 2}O{sub 3}@C porous. • The activated-Fe{sub 2}O{sub 3}@C supercapacitor exhibited superior electrochemical performance. - Abstract: Core–shell structure carbon coated ferric oxide nanoparticles (Fe{sub 2}O{sub 3}@C) were fabricated by the oxidation of carbon coated iron nanoparticles (Fe@C) prepared by a direct current carbon arc discharge method. Porous activated-Fe{sub 2}O{sub 3}@C was prepared by KOH activation of Fe{sub 2}O{sub 3}@C at the temperature of 750 °C. X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed to characterize the structure and morphology of the Fe{sub 2}O{sub 3}@C and activated-Fe{sub 2}O{sub 3}@C. The specific surface area and pore size distribution of the samples were also tested. The activated-Fe{sub 2}O{sub 3}@C electrodes exhibited good electrochemical performance with a maximum specific capacitance of 612 F g{sup −1} at the charge/discharge current density of 0.5 A g{sup −1} with 5 M NaOH electrolyte. After 10,000 cycling DC tests at the charge/discharge current density of 4 A g{sup −1}, a high level specific capacitance of 518 F g{sup −1} was obtained (90.6% retention of the initial capacity), suggesting excellent long-term cycling stability.

  10. Speckle tracking in a phantom and feature-based tracking in liver in the presence of respiratory motion using 4D ultrasound

    Science.gov (United States)

    Harris, Emma J.; Miller, Naomi R.; Bamber, Jeffrey C.; Symonds-Tayler, J. Richard N.; Evans, Philip M.

    2010-06-01

    We have evaluated a 4D ultrasound-based motion tracking system developed for tracking of abdominal organs during therapy. Tracking accuracy and precision were determined using a tissue-mimicking phantom, by comparing tracked motion with known 3D sinusoidal motion. The feasibility of tracking 3D liver motion in vivo was evaluated by acquiring 4D ultrasound data from four healthy volunteers. For two of these volunteers, data were also acquired whilst simultaneously measuring breath flow using a spirometer. Hepatic blood vessels, tracked off-line using manual tracking, were used as a reference to assess, in vivo, two types of automated tracking algorithm: incremental (from one volume to the next) and non-incremental (from the first volume to each subsequent volume). For phantom-based experiments, accuracy and precision (RMS error and SD) were found to be 0.78 mm and 0.54 mm, respectively. For in vivo measurements, mean absolute distance and standard deviation of the difference between automatically and manually tracked displacements were less than 1.7 mm and 1 mm respectively in all directions (left-right, anterior-posterior and superior-inferior). In vivo non-incremental tracking gave the best agreement. In both phantom and in vivo experiments, tracking performance was poorest for the elevational component of 3D motion. Good agreement between automatically and manually tracked displacements indicates that 4D ultrasound-based motion tracking has potential for image guidance applications in therapy.

  11. Early Progressive Strength Training to Enhance Recovery After Fast-Track Total Knee Arthroplasty

    DEFF Research Database (Denmark)

    Jakobsen, Thomas Linding; Kehlet, Henrik; Husted, Henrik

    2014-01-01

    OBJECTIVE: To compare 7 weeks of supervised physical rehabilitation with or without progressive strength training (PST) commenced early after fast-track total knee arthroplasty (TKA) on functional performance. METHODS: In total, 82 patients with a unilateral primary TKA were randomized to 2...... was not superior to 7 weeks of supervised physical rehabilitation without PST in improving functional performance, measured as the maximal walking distance in 6 minutes, at the primary end point 8 weeks after fast-track TKA....

  12. Simulator study of the effect of visual-motion time delays on pilot tracking performance with an audio side task

    Science.gov (United States)

    Riley, D. R.; Miller, G. K., Jr.

    1978-01-01

    The effect of time delay was determined in the visual and motion cues in a flight simulator on pilot performance in tracking a target aircraft that was oscillating sinusoidally in altitude only. An audio side task was used to assure the subject was fully occupied at all times. The results indicate that, within the test grid employed, about the same acceptable time delay (250 msec) was obtained for a single aircraft (fighter type) by each of two subjects for both fixed-base and motion-base conditions. Acceptable time delay is defined as the largest amount of delay that can be inserted simultaneously into the visual and motion cues before performance degradation occurs. A statistical analysis of the data was made to establish this value of time delay. Audio side task provided quantitative data that documented the subject's work level.

  13. The ATLAS Inner Detector operation,data quality and tracking performance.

    CERN Document Server

    Stanecka, E; The ATLAS collaboration

    2012-01-01

    The ATLAS Inner Detector comprises silicon and gas based detectors. The Semi-Conductor Tracker (SCT) and the Pixel Detector are the key precision tracking silicon devices in the Inner Detector of the ATLAS experiment at CERN LHC. And the the Transition Radiation Tracker (TRT), the outermost of the three subsystems of the ATLAS Inner Detector is made of thin-walled proportional-mode drift tubes (straws). The Pixel Detector consists of approximately 80 million pixels that are individually read out via chips bump-bonded to 1744 n-in-n silicon substrates. The SCT is a silicon strip detector and is constructed of 4088 silicon detector modules for a total of 6.3 million strips. Each module is designed, constructed and tested to operate as a stand-alone unit, mechanically, electrically, optically and thermally. The SCT silicon micro-strip sensors are processed in the planar p-in-n technology. The signals from the strips are processed in the front-end ASICS ABCD3TA, working in the binary readout mode. The TRT is made...

  14. SU-E-I-63: Performance Study of An Electron-Tracking Compton Camera for Medical Imaging.

    Science.gov (United States)

    Kabuki, S; Kimura, H; Kubo, H; Ogawa, K; Kunieda, E; Tanimori, T

    2012-06-01

    Conventional gamma-ray detector, PET and SPECT, have the limitation of energy and field of view. These limitations are major problems of studying for a new medical imaging. Therefore, we have developed the new imaging detector which is an electron-tracking Compton camera (ETCC). A reconstruction method of Compton camera (CC) is using the physics principle. Because of using physics principle, CC can have a wide energy dynamic range and wide field of view. Conventional CC, however, cannot catch Compton recoil electron tracks, and this is one of the reasons of low imaging power. We have developed a time projection chamber (TPC) using micro pixel chamber (μPIC) as the new detector for ETCC. The μPIC is 2-dimensional gaseous detector and this position resolution is less than 400 μm. Using this detector, ETCC can get electron tracks which are generated from Compton scattering. In this paper, we show the prototype ETCC performance and imaging results. ETCC achieved a wide energy dynamic range (200-1300keV) and wide field of view (3 steradian). Also we succeeded in imaging new imaging reagents using mice as follows; (1) F-18-FDG (511 keV) and I-131-MIBG (364 keV) simultaneous imaging for double clinical tracer imaging, (2) Zn-65- porphyrin (1116 keV) imaging for high energy gamma-ray imaging and, (3) imaging of some minerals (Mn-54, Zn-65) in mice and so on. And we succeeded in 3-D imaging which has imaged only one direction using one head camera. We have developed the ETCC for new medical imaging device and succeeded in imaging the some imaging reagents. We started to develop the new ETCC which can image the mouse within 30 min. Thus, this detector has the possibility of new medical imaging. © 2012 American Association of Physicists in Medicine.

  15. Facilities Performance Indicators Report 2011-12: Tracking Your Facilities Vital Signs

    Science.gov (United States)

    APPA: Association of Higher Education Facilities Officers, 2013

    2013-01-01

    This paper provides an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. APPA's Information and Research Committee's goal for this year was to enhance the…

  16. Career Performance Trajectories in Track and Field Jumping Events from Youth to Senior Success: The Importance of Learning and Development

    Science.gov (United States)

    Moisè, Paolo; Franceschi, Alberto; Trova, Francesco; Panero, Davide; La Torre, Antonio; Rainoldi, Alberto; Schena, Federico; Cardinale, Marco

    2017-01-01

    Introduction The idea that early sport success can be detrimental for long-term sport performance is still under debate. Therefore, the aims of this study were to examine the career trajectories of Italian high and long jumpers to provide a better understanding of performance development in jumping events. Methods The official long-jump and high-jump rankings of the Italian Track and Field Federation were collected from the age of 12 to career termination, for both genders from the year 1994 to 2014. Top-level athletes were identified as those with a percentile of their personal best performance between 97 and 100. Results The age of entering competitions of top-level athletes was not different than the rest of the athletic population, whereas top-level athletes performed their personal best later than the rest of the athletes. Top-level athletes showed an overall higher rate of improvement in performance from the age of 13 to the age of 18 years when compared to all other individuals. Only 10–25% of the top-level adult athletes were top-level at the age of 16. Around 60% of the top-level young at the age of 16 did not maintain the same level of performance in adulthood. Female high-jump represented an exception from this trend since in this group most top-level young become top-level adult athletes. Conclusions These findings suggest that performance before the age of 16 is not a good predictor of adult performance in long and high jump. The annual rate of improvements from 13 to 18 years should be included as a predictor of success rather than performance per se. Coaches should be careful about predicting future success based on performances obtained during youth in jumping events. PMID:28129370

  17. Career Performance Trajectories in Track and Field Jumping Events from Youth to Senior Success: The Importance of Learning and Development.

    Science.gov (United States)

    Boccia, Gennaro; Moisè, Paolo; Franceschi, Alberto; Trova, Francesco; Panero, Davide; La Torre, Antonio; Rainoldi, Alberto; Schena, Federico; Cardinale, Marco

    2017-01-01

    The idea that early sport success can be detrimental for long-term sport performance is still under debate. Therefore, the aims of this study were to examine the career trajectories of Italian high and long jumpers to provide a better understanding of performance development in jumping events. The official long-jump and high-jump rankings of the Italian Track and Field Federation were collected from the age of 12 to career termination, for both genders from the year 1994 to 2014. Top-level athletes were identified as those with a percentile of their personal best performance between 97 and 100. The age of entering competitions of top-level athletes was not different than the rest of the athletic population, whereas top-level athletes performed their personal best later than the rest of the athletes. Top-level athletes showed an overall higher rate of improvement in performance from the age of 13 to the age of 18 years when compared to all other individuals. Only 10-25% of the top-level adult athletes were top-level at the age of 16. Around 60% of the top-level young at the age of 16 did not maintain the same level of performance in adulthood. Female high-jump represented an exception from this trend since in this group most top-level young become top-level adult athletes. These findings suggest that performance before the age of 16 is not a good predictor of adult performance in long and high jump. The annual rate of improvements from 13 to 18 years should be included as a predictor of success rather than performance per se. Coaches should be careful about predicting future success based on performances obtained during youth in jumping events.

  18. Well-Combined Magnetically Separable Hybrid Cobalt Ferrite/Nitrogen-Doped Graphene as Efficient Catalyst with Superior Performance for Oxygen Reduction Reaction.

    Science.gov (United States)

    Lu, Lei; Hao, Qingli; Lei, Wu; Xia, Xifeng; Liu, Peng; Sun, Dongping; Wang, Xin; Yang, Xujie

    2015-11-18

    Catalysts with low-cost, high activity and stability toward oxygen reduction reaction (ORR) are extremely desirable, but its development still remains a great challenge. Here, a novel magnetically separable hybrid of multimetal oxide, cobalt ferrite (CoFe2O4), anchored on nitrogen-doped reduced graphene oxide (CoFe2O4/NG) is prepared via a facile solvothermal method followed by calcination at 500 °C. The structure of CoFe2O4/NG and the interaction of both components are analyzed by several techniques. The possible formation of Co/Fe-N interaction in the CoFe2O4/NG catalyst is found. As a result, the well-combination of CoFe2O4 nanoparticles with NG and its improved crystallinity lead to a synergistic and efficient catalyst with high performance to ORR through a four-electron-transfer process in alkaline medium. The CoFe2O4/NG exhibits particularly comparable catalytic activity as commercial Pt/C catalyst, and superior stability against methanol oxidation and CO poisoning. Meanwhile, it has been proved that both nitrogen doping and the spinel structure of CoFe2O4 can have a significant contribution to the catalytic activity by contrast experiments. Multimetal oxide hybrid demonstrates better catalysis to ORR than a single metal oxide hybrid. All results make the low-cost and magnetically separable CoFe2O4/NG a promising alternative for costly platinum-based ORR catalyst in fuel cells and metal-air batteries. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Uniformly active phase loaded selective catalytic reduction catalysts (V{sub 2}O{sub 5}/TNTs) with superior alkaline resistance performance

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Haiqiang; Wang, Penglu [Key Laboratory of Environment Remediation and Ecological Health, Ministry of Education, College of Environmental & Resources Science, Zhejiang University, 310058 Hangzhou (China); Zhejiang Provincial Engineering Research Center of Industrial Boiler & Furnace Flue Gas Pollution Control, Hangzhou 310027 (China); Chen, Xiongbo [South China Institute of Environmental Sciences, Ministry of Environmental Protection, Guangzhou 510655 (China); Wu, Zhongbiao, E-mail: zbwu@zju.edu.cn [Key Laboratory of Environment Remediation and Ecological Health, Ministry of Education, College of Environmental & Resources Science, Zhejiang University, 310058 Hangzhou (China); Zhejiang Provincial Engineering Research Center of Industrial Boiler & Furnace Flue Gas Pollution Control, Hangzhou 310027 (China)

    2017-02-15

    Highlights: • VOSO{sub 4} exhibited better synergistic effect with titanate nanotubes than NH{sub 4}VO{sub 3}. • Ion-exchange reaction occurs between VOSO{sub 4} and titanate nanotubes. • Ion-exchange resulting in uniformly vanadium distribution on titanate nanotubes. • VOSO{sub 4}-based catalyst exhibited impressive SCR activity and alkaline resistance. - Abstract: In this work, protonated titanate nanotubes was performed as a potential useful support and different vanadium precursors (NH{sub 4}VO{sub 3} and VOSO{sub 4}) were used to synthesize deNO{sub x} catalysts. The results showed that VOSO{sub 4} exhibited better synergistic effect with titanate nanotubes than NH{sub 4}VO{sub 3}, which was caused by the ion-exchange reaction. Then high loading content of vanadium, uniformly active phase distribution, better dispersion of vanadium, more acid sites, better V{sup 5+}/V{sup 4+} redox cycles and superior oxygen mobility were achieved. Besides, VOSO{sub 4}-based titanate nanotubes catalysts also showed enhanced alkaline resistance than particles (P25) based catalysts. It was strongly associated with its abundant acid sites, large surface area, flexible redox cycles and oxygen transfer ability. For the loading on protonated titanate nanotubes, active metal with cation groups was better precursors than anion ones. V{sub 2}O{sub 5}/TNTs catalyst was a promising substitute for the commercial vanadium catalysts and the work conducted herein provided a useful idea to design uniformly active phase loaded catalyst.

  20. A Novel Magnetically Recoverable Ni-CeO2-x/Pd Nanocatalyst with Superior Catalytic Performance for Hydrogenation of Styrene and 4-Nitrophenol.

    Science.gov (United States)

    Jiang, Yi-Fan; Yuan, Cheng-Zong; Xie, Xiao; Zhou, Xiao; Jiang, Nan; Wang, Xin; Imran, Muhammad; Xu, An-Wu

    2017-02-28

    Metal/support nanocatalysts consisting of various metals and metal oxides not only retain the basic properties of each component, but also exhibit higher catalytic activity due to their synergistic effects. Herein, we report the creation of a highly efficient, long-lasting and magnetic recyclable catalyst, composed of magnetic nickel (Ni) nanoparticles (NPs), active Pd NPs and oxygen deficient CeO2-x support. These hybrid nanostructures composed of oxygen deficient CeO2-x and active metal nanoparticles could effectively facilitate diffusion of reactant molecules and active site exposure that can dramatically accelerate the reaction rate. Impressively, the rate constant k and k/m of 4-nitrophenol reduction over 61 wt%Ni-CeO2-x/0.1 wt%Pd catalyst are respectively 0.0479 s-1 and 2.1×104 min-1 g-1, and the reaction conversion shows negligible decline even after 20 cycles. Meanwhile, the optimal 61 wt%Ni-CeO2-x/3 wt%Pd catalyst manifests remarkable catalytic activity towards styrene hydrogenation with a high TOF of 6827 molstyrene molPd-1 h-1 and a selective conversion of 100% to ethylbenzene even after eight cycles. The strong metal-support interaction (SMSI) between Ni NPs, Pd NPs and oxygen deficient CeO2-x support is beneficial for superior catalytic efficiency and stability toward hydrogenation of styrene and 4-nitrophenol. Moreover, Ni species could boost the catalytic activity of Pd due to their synergistic effect and strengthen the interaction between reactant and catalyst, which seems responsible for the great enhancement of catalytic activity. Our findings provide a new perspective to develop other high-performance and magnetically recoverable nanocatalysts, which would be widely applied to a variety of catalytic reactions.

  1. A Comparison of Nannochloropsis salina Growth Performance in Two Outdoor Pond Designs: Conventional Raceways versus the ARID Pond with Superior Temperature Management

    Directory of Open Access Journals (Sweden)

    Braden Crowe

    2012-01-01

    Full Text Available The present study examines how climatic conditions and pond design affect the growth performance of microalgae. From January to April of 2011, outdoor batch cultures of Nannochloropsis salina were grown in three replicate 780 L conventional raceways, as well as in an experimental 7500 L algae raceway integrated design (ARID pond. The ARID culture system utilizes a series of 8–20 cm deep basins and a 1.5 m deep canal to enhance light exposure and mitigate temperature variations and extremes. The ARID culture reached the stationary phase 27 days earlier than the conventional raceways, which can be attributed to its superior temperature management and shallower basins. On a night when the air temperature dropped to −9°C, the water temperature was 18°C higher in the ARID pond than in the conventional raceways. Lipid and fatty acid content ranged from 16 to 25% and from 5 to15%, respectively, as a percentage of AFDW. Palmitic, palmitoleic, and eicosapentaenoic acids comprised the majority of fatty acids. While the ARID culture system achieved nearly double the volumetric productivity relative to the conventional raceways (0.023 versus 0.013 g L−1day−1, areal biomass productivities were of similar magnitude in both pond systems (3.47 versus 3.34 g m−2day−1, suggesting that the ARID pond design has to be further optimized, most likely by increasing the culture depth or operating at higher cell densities while maintaining adequate mixing.

  2. The design and simulated performance of a fast Level 1 track trigger for the ATLAS High Luminosity Upgrade

    CERN Document Server

    Martensson, Mikael; The ATLAS collaboration

    2017-01-01

    The ATLAS experiment at the high-luminosity LHC will face a five-fold increase in the number of interactions per collision relative to the ongoing Run 2. This will require a proportional improvement in rejection power at the earliest levels of the detector trigger system, while preserving good signal efficiency. One critical aspect of this improvement will be the implementation of precise track reconstruction, through which sharper trigger turn-on curves can be achieved, and b-tagging and tau-tagging techniques can in principle be implemented. The challenge of such a project comes in the development of a fast, custom electronic device integrated in the hardware-based first trigger level of the experiment, with repercussions propagating as far as the detector read-out philosophy. This talk will discuss the requirements, architecture and projected performance of the system in terms of tracking, timing and physics, based on detailed simulations. Studies are carried out comparing two detector geometries and using...

  3. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...

  4. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare...... logistics. A set of decision indicators was identified in the case study to assess technologies based on expected process performance. Two aspects of performance measurement were investigated for the hospital cleaning process: what to measure and how to measure it....

  5. The Effects of Enhanced Disparity on Manual Control Stereopsis and Tracking Performance.

    Science.gov (United States)

    1981-06-22

    block number) ENHANCED DISPARITY, STEREOVISION , MANUAL CO=TROL, TRACKINCG 20. A STRACT (Continue on reverse side If neces ory and Identify by bork nu...to one side of the dual channel display system, would enable a pilot to utilize disparity information from objects at distances several orders of...that using stereovision causes a dramatic improvement in performance over monocular cues to depth, with the best performance at the largest optical

  6. Performance development in adolescent track and field athletes according to age, sex and sport discipline.

    Directory of Open Access Journals (Sweden)

    Espen Tønnessen

    Full Text Available Sex-specific differences that arise during puberty have a pronounced effect on the training process. However, the consequences this should have for goal-setting, planning and implementation of training for boys and girls of different ages remains poorly understood. The aim of this study was to quantify performance developments in athletic running and jumping disciplines in the age range 11-18 and identify progression differences as a function of age, discipline and sex.The 100 all-time best Norwegian male and female 60-m, 800-m, long jump and high jump athletes in each age category from 11 to 18 years were analysed using mixed models with random intercept according to athlete.Male and female athletes perform almost equally in running and jumping events up to the age of 12. Beyond this age, males outperform females. Relative annual performance development in females gradually decreases throughout the analyzed age period. In males, annual relative performance development accelerates up to the age of 13 (for running events or 14 (for jumping events and then gradually declines when approaching 18 years of age. The relative improvement from age 11 to 18 was twice as high in jumping events compared to running events. For all of the analyzed disciplines, overall improvement rates were >50% higher for males than for females. The performance sex difference evolves from < 5% to 10-18% in all the analyzed disciplines from age 11 to 18 yr.To the authors' knowledge, this is the first study to present absolute and relative annual performance developments in running and jumping events for competitive athletes from early to late adolescence. These results allow coaches and athletes to set realistic goals and prescribe conditioning programs that take into account sex-specific differences in the rate of performance development at different stages of maturation.

  7. Measurements of b-hadron lifetimes and the calibration and performance of the LHCb tracking system

    CERN Document Server

    Dupertuis, Frédéric Guillaume

    The LHCb experiment was designed to perform high precision measurements. The LHCb detector has excellent vertexing, momentum measurement and particle identification capabilities, with a detector geometry and trigger strategy specially adapted for the study of rare decays and $CP$ violation of $b$- and $c$-quarks. For accurate measurements, the detector needs to be perfectly calibrated and its performance monitored to achieve the required performance. The LHCb TELL1 boards are responsible for the acquisition and the pre-processing of the raw data. New effects on signals emitted by the front-end chip, the Beetle, of the Inner Tracker (IT) and Tracker Turicensis (TT) due to the different header configurations are discovered. Strategies to correct for these her effects are proposed and are implemented in the firmware of the IT and TT TELL1 boards. In addition, faster algorithms are developed to perform the calibration of the TELL1 boards and software is developed to perform the full calibration and a monitoring ...

  8. NECESSITY AND REALITY BETWEEN INFORMATION TRANSPARENCY IN PERFORMANCE SMEs TO TRACK

    Directory of Open Access Journals (Sweden)

    CONSTANŢA IACOB

    2010-01-01

    Full Text Available Although organizational performance is one of the most useful outcome variables are used today and its many measures, there is a lack of consensus on ways to measure performance of SMEs. As a business specializes in measurement, evaluation, knowledge management and control of assets, liabilities and equity, and the results obtained, the accounts must provide chronological and systematic recording, processing, publication and preservation of information on financial position, financial performance and cash flows, both for their domestic needs and in dealing with present and potential investors, financial and trade creditors, customers, public institutions and other users. A modern accounting system, but one which is open to investors and accounting can be applied outside the application of IFRS subject of this article.

  9. Continuous-time performance limitations for overshoot and resulted tracking measures

    CERN Document Server

    wenczel, rob

    2011-01-01

    A dual formulation for the problem of determining absolute performance limitations on overshoot, undershoot, maximum amplitude and fluctuation minimization for continuous-time feedback systems is constructed. Determining, for example, the minimum possible overshoot attainable by all possible stabilizing controllers is an optimization task that cannot be expressed as a minimum-norm problem. It is this fact, coupled with the continuous-time rather than discrete-time formulation, that makes these problems challenging. We extend previous results to include more general reference functions, and derive new results (in continuous time) on the influence of pole/zero locations on achievable time-domain performance.

  10. Robust and highly performant ring detection algorithm for 3d particle tracking using 2d microscope imaging

    CERN Document Server

    Afik, Eldad

    2013-01-01

    Three-dimensional particle tracking is an essential tool in studying dynamics under the microscope, namely, cellular trafficking, bacteria taxis, fluid dynamics in microfluidics devices. The 3d position of a fluorescent particle can be determined using 2d imaging alone, by measuring the diffraction rings generated by an out-of-focus particle, imaged on a single camera. Here I present a ring detection algorithm exhibiting a high detection rate, which is robust to the challenges arising from particles vicinity. It is capable of real time analysis thanks to its high performance and low memory footprint. Many of the algorithmic concepts introduced can be advantageous in other cases, particularly for sparse data. The implementation is based on open-source and cross-platform software packages only, making it easy to distribute and modify. The image analysis algorithm, which is an offspring of the full 3d circle Hough transform, addresses the need to efficiently trace the trajectories of several particles concurrent...

  11. DSP-based adaptive backstepping using the tracking errors for high-performance sensorless speed control of induction motor drive.

    Science.gov (United States)

    Zaafouri, Abderrahmen; Ben Regaya, Chiheb; Ben Azza, Hechmi; Châari, Abdelkader

    2016-01-01

    This paper presents a modified structure of the backstepping nonlinear control of the induction motor (IM) fitted with an adaptive backstepping speed observer. The control design is based on the backstepping technique complemented by the introduction of integral tracking errors action to improve its robustness. Unlike other research performed on backstepping control with integral action, the control law developed in this paper does not propose the increase of the number of system state so as not increase the complexity of differential equations resolution. The digital simulation and experimental results show the effectiveness of the proposed control compared to the conventional PI control. The results analysis shows the characteristic robustness of the adaptive control to disturbances of the load, the speed variation and low speed.

  12. The optical designing method and the concentrating performance analysis for a toroidal heliostat with spinning-elevation sun tracking

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Minghuan [Himin Solar Energy Group, Dezhou (China); CAS, Inst. of Electrical Engineering, Beijing (China); Lu, Zhenwu [CAS, Changchun Inst. of Optics Fine Mechanics and Physics, Changchun (China). State Key Lab. of Applied Optics; Wang, Zhifeng [Himin Solar Energy Group, Dezhou (China)

    2008-07-01

    A practical optical designing method for and some optical simulation results of a toroidal surface heliostat with the two axis spinning-elevation sun tracking are presented in this paper, which will be used as a concentrator for a hydrogen generation system. As a prototype, this heliostat has a compound toroidal surface, which is composed of the 16 same toroidal mirror facets of 1 meter width and 1 meter height with the focal length 7.4689 meters, and the design concentration power of the heliostat is 6 kilowatts. The sampling ray-tracing method including the solar disk effect is introduced and used to analyze the optical performance of the heliostat. The optical errors of the heliostat and the attenuation of reflected solar irradiance in the air have not been taken into account yet. (orig.)

  13. Performance of Tracking, b-tagging and Jet/MET reconstruction at the CMS High Level Trigger

    Science.gov (United States)

    Tosi, Mia

    2015-12-01

    The trigger systems of the LHC detectors play a crucial role in determining the physics capabilities of experiments. In 2015, the center-of-mass energy of proton-proton collisions will reach 13 TeV up to an unprecedented luminosity of 1 × 1034 cm-2s-1. A reduction of several orders of magnitude of the event rate is needed to reach values compatible with detector readout, offline storage and analysis capabilities. The CMS experiment has been designed with a two-level trigger system: the Level-1 Trigger (L1T), implemented on custom-designed electronics, and the High Level Trigger (HLT), a streamlined version of the offline reconstruction software running on a computer farm. A software trigger system requires a trade-off between the complexity of the algorithms, the sustainable output rate, and the selection efficiency. With the computing power available during the 2012 data taking the maximum reconstruction time at HLT was about 200 ms per event, at the nominal L1T rate of 100 kHz. Tracking algorithms are widely used in the HLT in the object reconstruction through particle-flow techniques as well as in the identification of b-jets and lepton isolation. Reconstructed tracks are also used to distinguish the primary vertex, which identifies the hard interaction process, from the pileup ones. This task is particularly important in the LHC environment given the large number of interactions per bunch crossing: on average 25 in 2012, and expected to be around 40 in Run II with a large contribution from out-of-time particles. In order to cope with tougher conditions the tracking and vertexing techniques used in 2012 have been largely improved in terms of timing and efficiency in order to keep the physics reach at the level of Run I conditions. We will present the performance of these newly developed algorithms, discussing their impact on the b-tagging performances as well as on the jet and missing transverse energy reconstruction.

  14. The Attitudes of Track and Field Throwers toward Performance Enhancing Drug Use and Drug Testing

    Science.gov (United States)

    Judge, Lawrence W.; Bellar, David; Craig, Bruce; Gilreath, Erin

    2010-01-01

    The practice of enhancing athletic performance through the use of ergogenic aids or by extraneous artificial means is as old as competitive sport itself. Although the abuse of such substances has been historically problematic, very little research assessing the attitudes of strength/power athletes concerning ergogenic aids exists. As national…

  15. Assessing and Tracking Students' Problem Solving Performances in Anchored Learning Environments

    Science.gov (United States)

    Bottge, Brian A.; Rueda, Enrique; Kwon, Jung Min; Grant, Timothy; LaRoque, Perry

    2009-01-01

    The purpose of this randomized experiment was to compare the performance of high-, average-, and low-achieving middle school students who were assessed with parallel versions of a computer-based test (CBT) or a paper-pencil test (PPT). Tests delivered in interactive, immersive environments like the CBT may have the advantage of providing teachers…

  16. Isolated superior mesenteric artery dissection

    Directory of Open Access Journals (Sweden)

    Lalitha Palle

    2010-01-01

    Full Text Available Isolated superior mesenteric artery (SMA dissection without involvement of the aorta and the SMA origin is unusual. We present a case of an elderly gentleman who had chronic abdominal pain, worse after meals. CT angiography, performed on a 64-slice CT scanner, revealed SMA dissection with a thrombus. A large artery of Drummond was also seen. The patient was managed conservatively.

  17. Effect of Functional Chemical Admixtures on the Performance of Cement Asphalt Mortar Used in Ballastless Track

    Institute of Scientific and Technical Information of China (English)

    JIANG Jinyang; SHE Wei; LI Wei; PAN Li

    2015-01-01

    Chemical admixtures are of paramount importance to the performance of modern cement based composites. In this paper, we performed a series of tests to investigate the effects of chemical admixtures on the cement asphalt mortar (CA mortar), i e, compressive strength, frost resistance, permeability, fatigue resistance, pore structure and microstructure. In particular, two types of chemical admixtures were tested,i e, defoamer (tributyl phosphate (TBP)) and polycarboxylate superplasticizer (PS). The results indicate that the addition of TBP and PS eliminates big bubbles and promotes small non-connected pores forming in matrix. Besides, an optimum dosage of TBP and PS may be determined with respect to the frost resistance, permeability and fatigue resistance of CA mortar. Further elaborative discussions are presented as well as experimental evidences from mercury intrusion porosimetry, scanning electron microscopy and energy dispersive spectroscopy.

  18. Statistical analysis of the performance and simulation of a two-axis tracking PV system

    Energy Technology Data Exchange (ETDEWEB)

    Perpinan, O. [Grupo de Sistemas Fotovoltaicos, IES-UPM, UPM, Ciudad Universitaria s/n, 28040 Madrid (Spain)

    2009-11-15

    The energy produced by a photovoltaic system over a given period can be estimated from the incident radiation at the site where the Grid Connected PV System (GCPVS) is located, assuming knowledge of certain basic features of the system under study. Due to the inherently stochastic nature of solar radiation, the question ''How much energy will a GCPVS produce at this location over the next few years?'' involves an exercise of prediction inevitably subjected to a degree of uncertainty. Moreover, during the life cycle of the GCPVS, another question arises: ''Is the system working correctly?''. This paper proposes and examines several methods to cope with these questions. The daily performance of a PV system is simulated. This simulation and the interannual variability of both radiation and productivity are statistically analyzed. From the results several regression adjustments are obtained. This analysis is shown to be useful both for productivity prediction and performance checking exercises. Finally, a statistical analysis of the performance of a GCPVS is carried out as a detection method of malfunctioning parts of the system. (author)

  19. Increasing Performance of Professional Soccer Players and Elite Track and Field Athletes with Peak Performance Training and Biofeedback: A Pilot Study.

    Science.gov (United States)

    Rijken, Noortje H; Soer, Remko; de Maar, Ewold; Prins, Hilco; Teeuw, Wouter B; Peuscher, Jan; Oosterveld, Frits G J

    2016-12-01

    The aim of this pilot study was to investigate the effects of an intervention consisting of mental coaching combined with either electro encephalogram (EEG) alpha power feedback or heart rate variability (HRV) feedback on HRV, EEG outcomes and self-reported factors related to stress, performance, recovery and sleep quality in elite athletes. A prospective pilot study was performed with two distinct cohorts. Soccer players were provided with four sessions of mental coaching combined with daily HRV biofeedback (Group A); track and field athletes were provided with four sessions of mental coaching in combination with daily neurofeedback (Group B). Measurements were performed at baseline, post intervention and at 5 weeks follow-up. Objective measures: EEG and ECG. Subjective measures: Numeric Rating Scale for performance, Pittsburgh Sleep Quality Index, Rest and Stress Questionnaire and Sports Improvement-60. Group characteristics were too distinct to compare the interventions. Linear mixed models were used to analyze differences within groups over time. In Group A, significant changes over time were present in alpha power at 5 of 7 EEG locations (p performance-related outcomes and stress reduction. Further research is needed to elucidate the effects of either type of feedback and to compare effects with a control group.

  20. Differential GNSS and Vision-Based Tracking to Improve Navigation Performance in Cooperative Multi-UAV Systems.

    Science.gov (United States)

    Vetrella, Amedeo Rodi; Fasano, Giancarmine; Accardo, Domenico; Moccia, Antonio

    2016-12-17

    Autonomous navigation of micro-UAVs is typically based on the integration of low cost Global Navigation Satellite System (GNSS) receivers and Micro-Electro-Mechanical Systems (MEMS)-based inertial and magnetic sensors to stabilize and control the flight. The resulting navigation performance in terms of position and attitude accuracy may not suffice for other mission needs, such as the ones relevant to fine sensor pointing. In this framework, this paper presents a cooperative UAV navigation algorithm that allows a chief vehicle, equipped with inertial and magnetic sensors, a Global Positioning System (GPS) receiver, and a vision system, to improve its navigation performance (in real time or in the post processing phase) exploiting formation flying deputy vehicles equipped with GPS receivers. The focus is set on outdoor environments and the key concept is to exploit differential GPS among vehicles and vision-based tracking (DGPS/Vision) to build a virtual additional navigation sensor whose information is then integrated in a sensor fusion algorithm based on an Extended Kalman Filter. The developed concept and processing architecture are described, with a focus on DGPS/Vision attitude determination algorithm. Performance assessment is carried out on the basis of both numerical simulations and flight tests. In the latter ones, navigation estimates derived from the DGPS/Vision approach are compared with those provided by the onboard autopilot system of a customized quadrotor. The analysis shows the potential of the developed approach, mainly deriving from the possibility to exploit magnetic- and inertial-independent accurate attitude information.

  1. Assessing the Performance of Sensor Fusion Methods: Application to Magnetic-Inertial-Based Human Body Tracking

    Directory of Open Access Journals (Sweden)

    Gabriele Ligorio

    2016-01-01

    Full Text Available Information from complementary and redundant sensors are often combined within sensor fusion algorithms to obtain a single accurate observation of the system at hand. However, measurements from each sensor are characterized by uncertainties. When multiple data are fused, it is often unclear how all these uncertainties interact and influence the overall performance of the sensor fusion algorithm. To address this issue, a benchmarking procedure is presented, where simulated and real data are combined in different scenarios in order to quantify how each sensor’s uncertainties influence the accuracy of the final result. The proposed procedure was applied to the estimation of the pelvis orientation using a waist-worn magnetic-inertial measurement unit. Ground-truth data were obtained from a stereophotogrammetric system and used to obtain simulated data. Two Kalman-based sensor fusion algorithms were submitted to the proposed benchmarking procedure. For the considered application, gyroscope uncertainties proved to be the main error source in orientation estimation accuracy for both tested algorithms. Moreover, although different performances were obtained using simulated data, these differences became negligible when real data were considered. The outcome of this evaluation may be useful both to improve the design of new sensor fusion methods and to drive the algorithm tuning process.

  2. Assessing the Performance of Sensor Fusion Methods: Application to Magnetic-Inertial-Based Human Body Tracking.

    Science.gov (United States)

    Ligorio, Gabriele; Bergamini, Elena; Pasciuto, Ilaria; Vannozzi, Giuseppe; Cappozzo, Aurelio; Sabatini, Angelo Maria

    2016-01-26

    Information from complementary and redundant sensors are often combined within sensor fusion algorithms to obtain a single accurate observation of the system at hand. However, measurements from each sensor are characterized by uncertainties. When multiple data are fused, it is often unclear how all these uncertainties interact and influence the overall performance of the sensor fusion algorithm. To address this issue, a benchmarking procedure is presented, where simulated and real data are combined in different scenarios in order to quantify how each sensor's uncertainties influence the accuracy of the final result. The proposed procedure was applied to the estimation of the pelvis orientation using a waist-worn magnetic-inertial measurement unit. Ground-truth data were obtained from a stereophotogrammetric system and used to obtain simulated data. Two Kalman-based sensor fusion algorithms were submitted to the proposed benchmarking procedure. For the considered application, gyroscope uncertainties proved to be the main error source in orientation estimation accuracy for both tested algorithms. Moreover, although different performances were obtained using simulated data, these differences became negligible when real data were considered. The outcome of this evaluation may be useful both to improve the design of new sensor fusion methods and to drive the algorithm tuning process.

  3. Intelligent controller for load-tracking performance of an autonomous power system

    Directory of Open Access Journals (Sweden)

    Abhik Banerjee

    2014-12-01

    Full Text Available The design and performance analysis of a Sugeno fuzzy logic (SFL controller for an autonomous power system model is presented in this paper. In gravitational search algorithm (GSA, the searcher agents are collection of masses and their interactions are based on Newtonian laws of gravity and motion. The problem of obtaining the optimal tunable parameters of the studied model is formulated as an optimization problem and the same is solved by a novel opposition based GSA (OGSA. The proposed OGSA of the present work employs opposition-based learning for population initialization and also for generation jumping. In OGSA, opposite numbers are utilized to improve the convergence rate of the basic GSA. GSA and genetic algorithm are taken for the sake of comparison. Time-domain simulation reveals that the developed OGSA-SFL based on-line, off-nominal controller parameters for the studied model give real-time on-line terminal voltage response.

  4. Energy-efficient ZigBee-based wireless sensor network for track bicycle performance monitoring.

    Science.gov (United States)

    Gharghan, Sadik K; Nordin, Rosdiadee; Ismail, Mahamod

    2014-08-22

    In a wireless sensor network (WSN), saving power is a vital requirement. In this paper, a simple point-to-point bike WSN was considered. The data of bike parameters, speed and cadence, were monitored and transmitted via a wireless communication based on the ZigBee protocol. Since the bike parameters are monitored and transmitted on every bike wheel rotation, this means the sensor node does not sleep for a long time, causing power consumption to rise. Therefore, a newly proposed algorithm, known as the Redundancy and Converged Data (RCD) algorithm, was implemented for this application to put the sensor node into sleep mode while maintaining the performance measurements. This is achieved by minimizing the data packets transmitted as much as possible and fusing the data of speed and cadence by utilizing the correlation measurements between them to minimize the number of sensor nodes in the network to one node, which results in reduced power consumption, cost, and size, in addition to simpler hardware implementation. Execution of the proposed RCD algorithm shows that this approach can reduce the current consumption to 1.69 mA, and save 95% of the sensor node energy. Also, the comparison results with different wireless standard technologies demonstrate minimal current consumption in the sensor node.

  5. Energy-Efficient ZigBee-Based Wireless Sensor Network for Track Bicycle Performance Monitoring

    Directory of Open Access Journals (Sweden)

    Sadik K. Gharghan

    2014-08-01

    Full Text Available In a wireless sensor network (WSN, saving power is a vital requirement. In this paper, a simple point-to-point bike WSN was considered. The data of bike parameters, speed and cadence, were monitored and transmitted via a wireless communication based on the ZigBee protocol. Since the bike parameters are monitored and transmitted on every bike wheel rotation, this means the sensor node does not sleep for a long time, causing power consumption to rise. Therefore, a newly proposed algorithm, known as the Redundancy and Converged Data (RCD algorithm, was implemented for this application to put the sensor node into sleep mode while maintaining the performance measurements. This is achieved by minimizing the data packets transmitted as much as possible and fusing the data of speed and cadence by utilizing the correlation measurements between them to minimize the number of sensor nodes in the network to one node, which results in reduced power consumption, cost, and size, in addition to simpler hardware implementation. Execution of the proposed RCD algorithm shows that this approach can reduce the current consumption to 1.69 mA, and save 95% of the sensor node energy. Also, the comparison results with different wireless standard technologies demonstrate minimal current consumption in the sensor node.

  6. Tracking growth hormone abuse in sport: performance of marker proteins in a controlled setting.

    Science.gov (United States)

    Bosch, J; Such-Sanmartín, G; Segura, J; Gutiérrez-Gallego, R

    2012-10-01

    Human growth hormone (hGH) abuse in sport is a challenge at present. The current strategy used, known as direct method, is based on the quantification of hGH variants in serum. An alternative strategy, known as indirect method, focuses on serum markers such as insulin-like growth factor I (IGF-I) and procollagen type III N-terminal propeptide (P-III-NP). The indirect method allows a longer window of detection (WOO) of hGH abuse. To evaluate the performance of the indirect method, in parallel to the direct method, a clinical trial with recombinant hGH (rhGH) was conducted on healthy male subjects during 7 days (0.026 mg(-1) kg(-1) person(-1) day(-1)). The data were fit to the discriminant formula proposed in the previously published GH-2000 project. The low sensitivity of the scores, judged from the high number of false negative outcomes, imposed a new discriminant analysis, standarised using local population subjects demographically similar to the ones of the study. The sensitivity of the method significantly increased, highlighting the importance of the standardisation. The indirect method allowed extended window of opportunity (WOO), although two false positive evaluations were observed derived from elevated basal IGF-I and P-III-NP concentrations stressing the need for an independent confirmation method. When direct and indirect methods were combined the best selectivity and sensitivity were achieved.

  7. Performance comparison of 2D assignment algorithms for assigning truth objects to measured tracks

    Science.gov (United States)

    Levedahl, Mark

    2000-07-01

    The processing time requirements of several algorithms for solving the 2-d (also called single frame) linear assignment problem are compared, along with their accuracy given either random or biased measurement errors. The specific problem considered is that of assigning measurements to truth objects using costs that are the chi-squared distances between them. Performance comparisons are provided for the algorithms implemented both in a compiled language C or FORTRAN) as well as the interpretive MatLab language. Accuracy considerations show optimal assignment algorithm is preferred if biased measurement errors are present. The Jonker-Volgenant-Castanon (JVC) algorithm is the preferred approach considering both average and maximum solution time. The Auction algorithm finds favor due to being both efficient as well as easy to understand, but is never faster and often much slower than the JVC algorithm. Both algorithms are dramatically faster than the Munkres algorithm. The greedy nearest neighbor algorithm is an ad hoc solution to provide a sub-optimal but unique solution more cheaply than the optimal assignment algorithms. However, the JVC algorithm is as fast as the greedy for simple problems, marginally slower at hard problems, and is vastly more accurate in the presence of measurement biases.

  8. Evaluating the Performance of Absolute RSSI Positioning Algorithm-Based Microzoning and RFID in Construction Materials Tracking

    Directory of Open Access Journals (Sweden)

    M. Truijens

    2014-01-01

    Full Text Available High accuracy of construction materials tracking with radio frequency identification technology (RFID is challenging to achieve. The microzoning method consists essentially of an absolute received signal strength indication (RSSI positioning algorithm on the basis of measuring the distance of tag from antennas base. In this paper, we analyse and examine the effects of microzoning method on the performance of RFID tags. A system was set up whereby RFID tags and antennas with the microzoning method were developed and studied. The performance of the tag antennas was studied with the practical read-range measurements. The study results showed that this absolute algorithm worked reliably and was suitable for RFID applications requiring identification of positions of onsite materials and components. The results also showed that the algorithm achieved a large read range and high accuracy. The study investigates the RFID solutions for Australian LNG (liquefied natural gas industry and was initiated by the collaboration between Woodside Energy, Curtin University, and Industrial Automation Group Pty Ltd.

  9. A performance study of an electron-tracking Compton camera with a compact system for environmental gamma-ray observation

    CERN Document Server

    Mizumoto, Tetsuya; Takada, Atsushi; Tanimori, Toru; Komura, Shotaro; Kubo, Hidetoshi; Matsuoka, Yoshihiro; Mizumura, Yoshitaka; Nakamura, Kiseki; Nakamura, Shogo; Oda, Makoto; Parker, Joseph D; Sawano, Tatsuya; Bando, Naoto; Nabetani, Akira

    2015-01-01

    An electron-tracking Compton camera (ETCC) is a detector that can determine the arrival direction and energy of incident sub-MeV/MeV gamma-ray events on an event-by-event basis. It is a hybrid detector consisting of a gaseous time projection chamber (TPC), that is the Compton-scattering target and the tracker of recoil electrons, and a position-sensitive scintillation camera that absorbs of the scattered gamma rays, to measure gamma rays in the environment from contaminated soil. To measure of environmental gamma rays from soil contaminated with radioactive cesium (Cs), we developed a portable battery-powered ETCC system with a compact readout circuit and data-acquisition system for the SMILE-II experiment. We checked the gamma-ray imaging ability and ETCC performance in the laboratory by using several gamma-ray point sources. The performance test indicates that the field of view (FoV) of the detector is about 1$\\;$sr and that the detection efficiency and angular resolution for 662$\\;$keV gamma rays from the ...

  10. Differential GNSS and Vision-Based Tracking to Improve Navigation Performance in Cooperative Multi-UAV Systems

    Directory of Open Access Journals (Sweden)

    Amedeo Rodi Vetrella

    2016-12-01

    Full Text Available Autonomous navigation of micro-UAVs is typically based on the integration of low cost Global Navigation Satellite System (GNSS receivers and Micro-Electro-Mechanical Systems (MEMS-based inertial and magnetic sensors to stabilize and control the flight. The resulting navigation performance in terms of position and attitude accuracy may not suffice for other mission needs, such as the ones relevant to fine sensor pointing. In this framework, this paper presents a cooperative UAV navigation algorithm that allows a chief vehicle, equipped with inertial and magnetic sensors, a Global Positioning System (GPS receiver, and a vision system, to improve its navigation performance (in real time or in the post processing phase exploiting formation flying deputy vehicles equipped with GPS receivers. The focus is set on outdoor environments and the key concept is to exploit differential GPS among vehicles and vision-based tracking (DGPS/Vision to build a virtual additional navigation sensor whose information is then integrated in a sensor fusion algorithm based on an Extended Kalman Filter. The developed concept and processing architecture are described, with a focus on DGPS/Vision attitude determination algorithm. Performance assessment is carried out on the basis of both numerical simulations and flight tests. In the latter ones, navigation estimates derived from the DGPS/Vision approach are compared with those provided by the onboard autopilot system of a customized quadrotor. The analysis shows the potential of the developed approach, mainly deriving from the possibility to exploit magnetic- and inertial-independent accurate attitude information.

  11. Differential GNSS and Vision-Based Tracking to Improve Navigation Performance in Cooperative Multi-UAV Systems

    Science.gov (United States)

    Vetrella, Amedeo Rodi; Fasano, Giancarmine; Accardo, Domenico; Moccia, Antonio

    2016-01-01

    Autonomous navigation of micro-UAVs is typically based on the integration of low cost Global Navigation Satellite System (GNSS) receivers and Micro-Electro-Mechanical Systems (MEMS)-based inertial and magnetic sensors to stabilize and control the flight. The resulting navigation performance in terms of position and attitude accuracy may not suffice for other mission needs, such as the ones relevant to fine sensor pointing. In this framework, this paper presents a cooperative UAV navigation algorithm that allows a chief vehicle, equipped with inertial and magnetic sensors, a Global Positioning System (GPS) receiver, and a vision system, to improve its navigation performance (in real time or in the post processing phase) exploiting formation flying deputy vehicles equipped with GPS receivers. The focus is set on outdoor environments and the key concept is to exploit differential GPS among vehicles and vision-based tracking (DGPS/Vision) to build a virtual additional navigation sensor whose information is then integrated in a sensor fusion algorithm based on an Extended Kalman Filter. The developed concept and processing architecture are described, with a focus on DGPS/Vision attitude determination algorithm. Performance assessment is carried out on the basis of both numerical simulations and flight tests. In the latter ones, navigation estimates derived from the DGPS/Vision approach are compared with those provided by the onboard autopilot system of a customized quadrotor. The analysis shows the potential of the developed approach, mainly deriving from the possibility to exploit magnetic- and inertial-independent accurate attitude information. PMID:27999318

  12. A comparative study of students' track and field technical performance in sport education and in a direct instruction approach.

    Science.gov (United States)

    Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

    2015-03-01

    This study examined students' technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students' technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key pointsThe impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level.The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged.

  13. Emprego de uma abordagem multicritério para classificação do desempenho de instituições de ensino superior Utilización de una metodología multicriterio para la clasificación del desempeño de instituciones de educación superior Using a multicriteria approach for classifying universities' performance

    Directory of Open Access Journals (Sweden)

    André Luís Policani Freitas

    2009-12-01

    Ponderada para clasificar el funcionamiento de las Instituciones de Educación Superior segundo la opinión de profesores y estudiantes. Con el deseo de investigar el uso de esta metodología, fue realizado un experimento en una universidad publica - el análisis de los resultados y algunas conclusiones son presentadas. Las potencialidades/debilidades y los puntos críticos que se deben dar la prioridad a favor de la mejora de la Calidad en la Educación fueran identificados.Since the 90's, the Brazilian University System has experienced a fast growth, which is characterized by the increasing quantity of Universities and University Degree Courses. In this context, it's essential that exists an efficient Education Evaluation System to monitor the information of these universities and to assure that the education quality provided by them achieve the recommended standards. One way to get the Education System efficiency is to continuously evaluate the performance of Universities concerning several criteria. Thus, this work presents a multicriteria approach based on the traditional Weighted Average method for sorting the universities performance according to professors and students points of view. In order to investigate the application of this approach, a case study was conducted in a Public university. The weaknesses/potentialities and the critical points which must be prioritized in order to improve the Education Quality were identified.

  14. Design and Application of a Robust Vision Tracking System for Unmanned Rotorcraft

    Institute of Scientific and Technical Information of China (English)

    FAN Baojie; DU Yingkui

    2014-01-01

    In order to satisfy the requirements of UAV’s aerial safety monitoring and surveillance of sensitive areas, a robust vision system for the rotor UAV is designed and implemented, which includes visual airborne subsystem, ground station subsystem and wireless communication subsystem. Complete sky-ground and human-computer interaction loops are constructed. Based on the developed UAV vision platform, a real-time target tracking algorithm under the mean shift tracking framework is developed. The joint color-texture histogram is used to represent the target robustly. With the help of moment information, the scale and the orientation of the tracked target is estimated adaptively during the tracking process. A model updating scheme for the target and the background is introduced to reduce the interferences from background and the locating biases. Numerical simulation and real flight tracking experiments demonstrate that the overall visual tracking system is effective and has superior performance against several state-of-the-art algorithms.

  15. School-to-Work Transition of College Graduates in Korea: The Impact of High School Track on College Performance and Post-College Occupational Outcomes

    Science.gov (United States)

    Kwon, Sung Youn

    2014-01-01

    This study aimed at examining the impacts of high school track on college performance and subsequent occupational outcomes after college graduation. To this end, the Korean Education and Employment Panel (KEEP) data from 2004 through 2010, including 4,000 samples of 12th graders as of 2004 from vocational and general high schools, were analyzed.…

  16. Event related potentials to digit learning: Tracking neurophysiologic changes accompanying recall performanceModelling of auditory evoked potentials of human sleep-wake states

    NARCIS (Netherlands)

    Jongsma, M.L.A.; Gerrits, N.J.H.M.; Rijn, C.M. van; Quiroga, R.Q.; Maes, J.H.R.

    2012-01-01

    The aim of this study was to track recall performance and event-related potentials (ERPs) across multiple trials in a digit-learning task. When a sequence is practiced by repetition, the number of errors typically decreases and a learning curve emerges. Until now, almost all ERP learning and memory

  17. Combining Multiple Algorithms for Road Network Tracking from Multiple Source Remotely Sensed Imagery: a Practical System and Performance Evaluation

    Science.gov (United States)

    Lin, Xiangguo; Liu, Zhengjun; Zhang, Jixian; Shen, Jing

    2009-01-01

    In light of the increasing availability of commercial high-resolution imaging sensors, automatic interpretation tools are needed to extract road features. Currently, many approaches for road extraction are available, but it is acknowledged that there is no single method that would be successful in extracting all types of roads from any remotely sensed imagery. In this paper, a novel classification of roads is proposed, based on both the roads' geometrical, radiometric properties and the characteristics of the sensors. Subsequently, a general road tracking framework is proposed, and one or more suitable road trackers are designed or combined for each type of roads. Extensive experiments are performed to extract roads from aerial/satellite imagery, and the results show that a combination strategy can automatically extract more than 60% of the total roads from very high resolution imagery such as QuickBird and DMC images, with a time-saving of approximately 20%, and acceptable spatial accuracy. It is proven that a combination of multiple algorithms is more reliable, more efficient and more robust for extracting road networks from multiple-source remotely sensed imagery than the individual algorithms. PMID:22399965

  18. Superior Hiking Trail

    Data.gov (United States)

    Minnesota Department of Natural Resources — Superior Hiking Trail main trail, spurs, and camp spurs for completed trail throughout Cook, Lake, St. Louis and Carlton counties. These data were collected with...

  19. Bathymetry of Lake Superior

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathymetry of Lake Superior has been compiled as a component of a NOAA project to rescue Great Lakes lake floor geological and geophysical data and make it more...

  20. Superior Hiking Trail Facilities

    Data.gov (United States)

    Minnesota Department of Natural Resources — Superior Hiking Trail main trail, spurs, and camp spurs for completed trail throughout Cook, Lake, St. Louis and Carlton counties. These data were collected with...

  1. One antenna, two antennae, big antennae, small: total antennae length, not bilateral symmetry, predicts odor-tracking performance in the American cockroach Periplaneta americana.

    Science.gov (United States)

    Lockey, Jacob K; Willis, Mark A

    2015-07-01

    Determining the location of a particular stimulus is often crucial to an animal's survival. One way to determine the local distribution of an odor is to make simultaneous comparisons across multiple sensors. If the sensors detect differences in the distribution of an odor in space, the animal can then steer toward the source. American cockroaches, Periplaneta americana, have 4 cm long antennae and are thought to track odor plumes using a spatial sampling strategy, comparing the amount of odor detected between these bilateral sensors. However, it is not uncommon for cockroaches to lose parts of their antennae and still track a wind-borne odor to its source. We examined whether bilateral odor input is necessary to locate an odor source in a wind-driven environment and how the loss of increasing lengths of the antennae affects odor tracking. The tracking performances of individuals with two bilaterally symmetrical antennae of decreasing length were compared with antennal length-matched individuals with one antenna. Cockroaches with one antenna were generally able to track an odor plume to its source. In fact, the performances of unilaterally antennectomized individuals were statistically identical to those of their bilaterally symmetrical counterparts when the combined length of both antennae equaled the length of the single antenna of the antennectomized individuals. This suggests that the total length of available antennae influences odor tracking performance more than any specific piece of antenna, and that they may be doing something more complex than a simple bilateral comparison between their antennae. The possibility of an antenna-topic map is discussed. © 2015. Published by The Company of Biologists Ltd.

  2. Diffusion tensor imaging fiber tracking with reliable tracking orientation and flexible step size

    Institute of Scientific and Technical Information of China (English)

    Xufeng Yao; Manning Wang; Xinrong Chen; Shengdong Nie; Zhexu Li; Xiaoping Xu; Xuelong Zhang; Zhijian Song

    2013-01-01

    We propose a method of reliable tracking orientation and flexible step size fiber tracking. A new directional strategy was defined to select one optimal tracking orientation from each directional set, which was based on the single-tensor model and the two-tensor model. The directional set of planar voxels contained three tracking directions: two from the two-tensor model and one from the singletensor model. The directional set of linear voxels contained only one principal vector. In addition, a flexible step size, rather than fixable step sizes, was implemented to improve the accuracy of fiber tracking. We used two sets of human data to assess the performance of our method; one was from a healthy volunteer and the other from a patient with low-grade glioma. Results verified that our method was superior to the single-tensor Fiber Assignment by Continuous Tracking and the two-tensor eXtended Streamline Tractography for showing detailed images of fiber bundles.

  3. TH-A-19A-04: Latent Uncertainties and Performance of a GPU-Implemented Pre-Calculated Track Monte Carlo Method

    Energy Technology Data Exchange (ETDEWEB)

    Renaud, M; Seuntjens, J [McGill University, Montreal, QC (Canada); Roberge, D [Centre Hospitalier de l' Universite de Montreal, Montreal, QC (Canada)

    2014-06-15

    Purpose: Assessing the performance and uncertainty of a pre-calculated Monte Carlo (PMC) algorithm for proton and electron transport running on graphics processing units (GPU). While PMC methods have been described in the past, an explicit quantification of the latent uncertainty arising from recycling a limited number of tracks in the pre-generated track bank is missing from the literature. With a proper uncertainty analysis, an optimal pre-generated track bank size can be selected for a desired dose calculation uncertainty. Methods: Particle tracks were pre-generated for electrons and protons using EGSnrc and GEANT4, respectively. The PMC algorithm for track transport was implemented on the CUDA programming framework. GPU-PMC dose distributions were compared to benchmark dose distributions simulated using general-purpose MC codes in the same conditions. A latent uncertainty analysis was performed by comparing GPUPMC dose values to a “ground truth” benchmark while varying the track bank size and primary particle histories. Results: GPU-PMC dose distributions and benchmark doses were within 1% of each other in voxels with dose greater than 50% of Dmax. In proton calculations, a submillimeter distance-to-agreement error was observed at the Bragg Peak. Latent uncertainty followed a Poisson distribution with the number of tracks per energy (TPE) and a track bank of 20,000 TPE produced a latent uncertainty of approximately 1%. Efficiency analysis showed a 937× and 508× gain over a single processor core running DOSXYZnrc for 16 MeV electrons in water and bone, respectively. Conclusion: The GPU-PMC method can calculate dose distributions for electrons and protons to a statistical uncertainty below 1%. The track bank size necessary to achieve an optimal efficiency can be tuned based on the desired uncertainty. Coupled with a model to calculate dose contributions from uncharged particles, GPU-PMC is a candidate for inverse planning of modulated electron radiotherapy

  4. Compressive tracking with incremental multivariate Gaussian distribution

    Science.gov (United States)

    Li, Dongdong; Wen, Gongjian; Zhu, Gao; Zeng, Qiaoling

    2016-09-01

    Various approaches have been proposed for robust visual tracking, among which compressive tracking (CT) yields promising performance. In CT, Haar-like features are efficiently extracted with a very sparse measurement matrix and modeled as an online updated naïve Bayes classifier to account for target appearance change. The naïve Bayes classifier ignores overlap between Haar-like features and assumes that Haar-like features are independently distributed, which leads to drift in complex scenario. To address this problem, we present an extended CT algorithm, which assumes that all Haar-like features are correlated with each other and have multivariate Gaussian distribution. The mean vector and covariance matrix of multivariate normal distribution are incrementally updated with constant computational complexity to adapt to target appearance change. Each frame is associated with a temporal weight to expend less modeling power on old observation. Based on temporal weight, an update scheme with changing but convergent learning rate is derived with strict mathematic proof. Compared with CT, our extended algorithm achieves a richer representation of target appearance. The incremental multivariate Gaussian distribution is integrated into the particle filter framework to achieve better tracking performance. Extensive experiments on the CVPR2013 tracking benchmark demonstrate that our proposed tracker achieves superior performance both qualitatively and quantitatively over several state-of-the-art trackers.

  5. Fast Frequency Offset Acquisition and Accurate Tracking in OFDM Systems

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhong-shan; ZHAO Ming; LIU Yuan-an

    2004-01-01

    A new carrier frequency offset estimation scheme for Orthogonal Frequency-Division Multiplexing (OFDM) systems is proposed. The carrier frequency offset estimation includes acquisition and tracking. The acquisition range of the proposed algorithm is as large as one half of the overall signal bandwidth. Comparison of the proposed scheme with Schmidl's algorithm by computer simulation illustrates the superior performance of the proposed scheme with regard to estimation accuracy in both AWGN channel and multipath channels.

  6. Modeling and Anti-Interference Performance Analysis for GPS Vector Tracking%GPS 矢量跟踪建模与抗干扰性能分析

    Institute of Scientific and Technical Information of China (English)

    孙兆妍; 王新龙; 车欢; 李群生

    2016-01-01

    The anti-interference performance of GPS vector tracking loop is discussed deeply .The systematic models and bandwidth models of vector delay lock loop and vector frequency lock loop are es -tablished , and based on the analysis for noise bandwidth of vector tracking loop , it is illustrated that vec-tor tracking loop is capable of adaptively adjusting the noise bandwidth to adapt to the interference envi -ronments of different intensity .The interference-to-signal ratio is computed with the measurement errors within vector tracking loop to determine the anti-interference performance in complex environments .Com-pared with scalar tracking loop , GPS vector tracking loop has stronger anti-interference ability .%对GPS矢量跟踪环路的抗干扰性能进行了深入讨论。建立了矢量延迟锁定环及矢量频率锁定环的系统模型及带宽模型,分析说明了矢量跟踪环路能够自适应调整噪声带宽,从而适应不同强度的干扰环境;结合环路内的测量误差,计算得到矢量跟踪环路的干信比容限,确定了复杂环境中矢量跟踪环路的抗干扰性能。通过与标量跟踪的比较分析表明, GPS矢量跟踪具有更强的抗干扰能力。

  7. A track length estimator method for dose calculations in low-energy X-ray irradiations. Implementation, properties and performance

    Energy Technology Data Exchange (ETDEWEB)

    Baldacci, F.; Delaire, F.; Letang, J.M.; Sarrut, D.; Smekens, F.; Freud, N. [Lyon-1 Univ. - CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Centre Leon Berard (France); Mittone, A.; Coan, P. [LMU Munich (Germany). Dept. of Physics; LMU Munich (Germany). Faculty of Medicine; Bravin, A.; Ferrero, C. [European Synchrotron Radiation Facility, Grenoble (France); Gasilov, S. [LMU Munich (Germany). Dept. of Physics

    2015-05-01

    The track length estimator (TLE) method, an 'on-the-fly' fluence tally in Monte Carlo (MC) simulations, recently implemented in GATE 6.2, is known as a powerful tool to accelerate dose calculations in the domain of low-energy X-ray irradiations using the kerma approximation. Overall efficiency gains of the TLE with respect to analogous MC were reported in the literature for regions of interest in various applications (photon beam radiation therapy, X-ray imaging). The behaviour of the TLE method in terms of statistical properties, dose deposition patterns, and computational efficiency compared to analogous MC simulations was investigated. The statistical properties of the dose deposition were first assessed. Derivations of the variance reduction factor of TLE versus analogous MC were carried out, starting from the expression of the dose estimate variance in the TLE and analogous MC schemes. Two test cases were chosen to benchmark the TLE performance in comparison with analogous MC: (i) a small animal irradiation under stereotactic synchrotron radiation therapy conditions and (ii) the irradiation of a human pelvis during a cone beam computed tomography acquisition. Dose distribution patterns and efficiency gain maps were analysed. The efficiency gain exhibits strong variations within a given irradiation case, depending on the geometrical (voxel size, ballistics) and physical (material and beam properties) parameters on the voxel scale. Typical values lie between 10 and 103, with lower levels in dense regions (bone) outside the irradiated channels (scattered dose only), and higher levels in soft tissues directly exposed to the beams.

  8. PERSISTENT LEFT SUPERIOR VENACAVA

    Directory of Open Access Journals (Sweden)

    Devinder Singh

    2014-05-01

    Full Text Available A Persistent Left Superior Venacava (PLSVC is the most common variation of the thoracic venous system and rare congenital vascular anomaly and is prevalent in 0.3% of the population. It may be associated with other cardiovascular abnormalities including atrial septal defect, bicuspid aortic valve, coarctation of aorta, coronary sinus ostial atresia, and cor triatriatum. Incidental rotation of a dilated coronary sinus on echocardiography should raise the suspicion of PLSVC. The diagnosis should be confirmed by saline contrast echocardiography. Condition is usually asymptomatic. Here we present a rare case of persistent left superior vena cava presented in OPD with dyspnoea & palpitations.

  9. Energy Efficient Moving Target Tracking in Wireless Sensor Networks.

    Science.gov (United States)

    Wen, Yingyou; Gao, Rui; Zhao, Hong

    2016-01-02

    Moving target tracking in wireless sensor networks is of paramount importance. This paper considers the problem of state estimation for L-sensor linear dynamic systems. Firstly, the paper establishes the fuzzy model for measurement condition estimation. Then, Generalized Kalman Filter design is performed to incorporate the novel neighborhood function and the target motion information, improving with an increasing number of active sensors. The proposed measurement selection approach has some advantages in time cost. As such, if the desired accuracy has been achieved, the parameter initialization for optimization can be readily resolved, which maximizes the expected lifespan while preserving tracking accuracy. Through theoretical justifications and empirical studies, we demonstrate that the proposed scheme achieves substantially superior performances over conventional methods in terms of moving target tracking under the resource-constrained wireless sensor networks.

  10. Characterization of few-layer 1T-MoSe{sub 2} and its superior performance in the visible-light induced hydrogen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Uttam; Naidu, B. S.; Maitra, Urmimala; Rao, C. N. R., E-mail: cnrrao@jncasr.ac.in [Chemistry and Physics Materials Unit, New Chemistry Unit and International Centre for Materials Science, Sheik Saqr Laboratory, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur P. O., Bangalore 560064 (India); Singh, Anjali; Shirodkar, Sharmila N.; Waghmare, Umesh V. [Theoretical Sciences Unit, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur P. O., Bangalore 560064 (India)

    2014-09-01

    Based on earlier results on the photocatalytic properties of MoS{sub 2}, the 1T form of MoSe{sub 2}, prepared by lithium intercalation and exfoliation of bulk MoSe{sub 2}, has been employed for the visible-light induced generation of hydrogen. 1T-MoSe{sub 2} is found to be superior to both 2H and 1T MoS{sub 2} as well as 2H-MoSe{sub 2} in producing hydrogen from water, the yield being in the 60–75 mmol h{sup −1} g{sup −1} range with a turn over frequency of 15–19 h{sup −1}. First principles calculations reveal that 1T-MoSe{sub 2} has a lower work function than 2H-MoSe{sub 2} as well as 1T and 2H-MoS{sub 2}, making it easier to transfer an electron from 1T-MoSe{sub 2} for the production of H{sub 2}.

  11. Characterization of few-layer 1T-MoSe2 and its superior performance in the visible-light induced hydrogen evolution reaction

    Directory of Open Access Journals (Sweden)

    Uttam Gupta

    2014-09-01

    Full Text Available Based on earlier results on the photocatalytic properties of MoS2, the 1T form of MoSe2, prepared by lithium intercalation and exfoliation of bulk MoSe2, has been employed for the visible-light induced generation of hydrogen. 1T-MoSe2 is found to be superior to both 2H and 1T MoS2 as well as 2H-MoSe2 in producing hydrogen from water, the yield being in the 60–75 mmol h−1 g−1 range with a turn over frequency of 15–19 h−1. First principles calculations reveal that 1T-MoSe2 has a lower work function than 2H-MoSe2 as well as 1T and 2H-MoS2, making it easier to transfer an electron from 1T-MoSe2 for the production of H2.

  12. Maximal rate of increase in heart rate during the rest-exercise transition tracks reductions in exercise performance when training load is increased.

    Science.gov (United States)

    Nelson, Maximillian J; Thomson, Rebecca L; Rogers, Daniel K; Howe, Peter R C; Buckley, Jonathan D

    2014-01-01

    Heart rate kinetics are faster in well-trained athletes at exercise onset, indicating sensitivity to training status, but whether they track performance changes due to changes in training load is unknown. Randomised, counterbalanced, cross-over. 17 cyclists completed two weeks of light and two weeks of heavy training. The day after each training period heart rate was recorded during 5 min cycling at 100 W to determine the maximal rate of heart rate increase. Participants then performed a 5 min cycle time-trial after which heart rate recovery was determined. Work during 5 min cycle time-trial decreased 3.5% (Pincreased training load (completed light training then heavy training) and, although maximal rate of heart rate increase did not change (P=0.27), within-individual changes in work were correlated with changes in maximal rate of heart rate increase (r=0.87, P=0.005). Work during 5 min cycle time-trial increased 6.5% (Prate of heart rate increase increased 28% (P=0.002) but the changes in maximal work were not related to changes in rate of heart rate increase (r=0.32, P=0.40). Heart rate recovery tended to track changes in 5 min cycle time-trial work following increases and decreases in training load (r=0.65-0.75, P=0.03-0.08). Maximal rate of heart rate increases during cycling at 100 W tracks reductions in exercise performance when training load is increased, but not performance improvements when training loads are reduced. Maximal rate of heart rate increase may be a useful adjunct to heart rate recovery for tracking changes in exercise performance. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  13. Performance evaluation of Maximum Power Point Tracking algorithm with buck dc-dc converter for Solar PV system

    Directory of Open Access Journals (Sweden)

    Ahteshamul Haque

    2016-02-01

    Full Text Available The energy crisis concern leads to look for alternate source of energy. Solar energy is considered as most reliable among the all renewable energy sources. Solar PV (Photovoltaic is used to convert solar energy into electric energy. The efficiency of solar PV is very low and its characteristic is nonlinear. To overcome these drawbacks a technique known as maximum power point tracking is used. This algorithm is implemented in the control circuit of DC – DC converter. The objective of this paper is to evaluate the MPPT (Maximum Power Point Tracking with buck DC-DC converter under load varying conditions. The simulation work is done using PSIM simulation software.

  14. Tracking and flavour-tagging performance for HV-CMOS sensors in the context of the ATLAS ITK pixel simulation program

    Science.gov (United States)

    Calandri, A.; Vacavant, L.; Barbero, M.; Rozanov, A.; Djama, F.

    2016-12-01

    The HV-CMOS (High Voltage - Complementary Metal-Oxide Semiconductor) pixel technology has recently risen interest for the upgrade of the pixel detector of the ATLAS experiment towards the High Luminosity phase of the Large Hadron Collider (LHC) . HV-CMOS sensors can be employed in the pixel outer layers (R >15 cm), where the radiation hardness requirements are less stringent, as they could instrument large areas at a relatively low cost. In addition, smaller pixel granularity can be achieved by exploiting sub-pixel encoding technology. Therefore, the largest impact on physics performance, tracking and flavour tagging, could be reached if exploited in the innermost layer (in place of the current IBL) or in the next-to-innermost layer. This proceeding will present studies on tracking and flavour-tagging performance in presence of HV-CMOS sensors in the innermost layer of the ATLAS detector.

  15. Trajetória escolar do surdo no ensino superior: condições e possibilidades School performance of the deaf in higher education: conditions and possibilities

    Directory of Open Access Journals (Sweden)

    José Ildon Gonçalves da Cruz

    2009-04-01

    Full Text Available Devido ao número relativamente pequeno de surdos que frequentam o ensino superior, este estudo objetivou conhecer as suas condições nesse nível de ensino. Participaram da pesquisa sete surdos universitários, na faixa etária entre 22 e 39 anos. Os dados foram obtidos por meio de entrevistas individuais sucessivas, presenciais ou à distância, via internet, empregando o português falado, escrito ou a língua de sinais, com a mediação de intérprete. Realizaram-se dez entrevistas presenciais, gravadas e transcritas, e onze à distância, mediante e-mail e Messenger®. Os relatos foram analisados sob o ponto de vista sócio-antropológico, que entende os surdos como diferentes, linguística e culturalmente, pertencentes aos grupos minoritários e que frequentam, na maioria das vezes, uma escola organizada para ouvintes e padronizada. Os resultados apontam que as condições dos surdos no ensino superior são de dificuldades, de impedimentos, de abandono e de rejeição. Os surdos são obrigados a se responsabilizarem por sua aprendizagem, priorizando o trabalho extra classe para recuperação de notas. A escola se organiza de acordo com interesses e necessidades dos ouvintes, isto é: não há uma língua compartilhada com os alunos surdos, não há intérprete português-Libras, não há contexto bicultural, não há interlocução na escola. Concluiu-se que os surdos são capazes, produtivos, solidários e interessados em avançar no seu processo de escolarização, apesar dos empecilhos encontrados no interior do espaço escolar.Due to the relatively small number of deaf students enrolled in higher education, this study aimed to look at learning conditions at that educational level. Seven deaf college students, aged 22-39, participated in the research study. Data was collected through successive individual interviews, in person or by internet, using Portuguese language in spoken or written form or through the manual alphabet with the

  16. Can Tracking Improve Learning?

    Science.gov (United States)

    Duflo, Esther; Dupas, Pascaline; Kremer, Michael

    2009-01-01

    Tracking students into different classrooms according to their prior academic performance is controversial among both scholars and policymakers. If teachers find it easier to teach a homogeneous group of students, tracking could enhance school effectiveness and raise test scores of both low- and high-ability students. If students benefit from…

  17. Can Tracking Improve Learning?

    Science.gov (United States)

    Duflo, Esther; Dupas, Pascaline; Kremer, Michael

    2009-01-01

    Tracking students into different classrooms according to their prior academic performance is controversial among both scholars and policymakers. If teachers find it easier to teach a homogeneous group of students, tracking could enhance school effectiveness and raise test scores of both low- and high-ability students. If students benefit from…

  18. Comparative system identification of flower tracking performance in three hawkmoth species reveals adaptations for dim light vision.

    Science.gov (United States)

    Stöckl, Anna L; Kihlström, Klara; Chandler, Steven; Sponberg, Simon

    2017-04-05

    Flight control in insects is heavily dependent on vision. Thus, in dim light, the decreased reliability of visual signal detection also prompts consequences for insect flight. We have an emerging understanding of the neural mechanisms that different species employ to adapt the visual system to low light. However, much less explored are comparative analyses of how low light affects the flight behaviour of insect species, and the corresponding links between physiological adaptations and behaviour. We investigated whether the flower tracking behaviour of three hawkmoth species with different diel activity patterns revealed luminance-dependent adaptations, using a system identification approach. We found clear luminance-dependent differences in flower tracking in all three species, which were explained by a simple luminance-dependent delay model, which generalized across species. We discuss physiological and anatomical explanations for the variance in tracking responses, which could not be explained by such simple models. Differences between species could not be explained by the simple delay model. However, in several cases, they could be explained through the addition on a second model parameter, a simple scaling term, that captures the responsiveness of each species to flower movements. Thus, we demonstrate here that much of the variance in the luminance-dependent flower tracking responses of hawkmoths with different diel activity patterns can be captured by simple models of neural processing.This article is part of the themed issue 'Vision in dim light'.

  19. PSO Algorithm Particle Filters for Improving the Performance of Lane Detection and Tracking Systems in Difficult Roads

    Directory of Open Access Journals (Sweden)

    Wen-Chang Cheng

    2012-12-01

    Full Text Available In this paper we propose a robust lane detection and tracking method by combining particle filters with the particle swarm optimization method. This method mainly uses the particle filters to detect and track the local optimum of the lane model in the input image and then seeks the global optimal solution of the lane model by a particle swarm optimization method. The particle filter can effectively complete lane detection and tracking in complicated or variable lane environments. However, the result obtained is usually a local optimal system status rather than the global optimal system status. Thus, the particle swarm optimization method is used to further refine the global optimal system status in all system statuses. Since the particle swarm optimization method is a global optimization algorithm based on iterative computing, it can find the global optimal lane model by simulating the food finding way of fish school or insects under the mutual cooperation of all particles. In verification testing, the test environments included highways and ordinary roads as well as straight and curved lanes, uphill and downhill lanes, lane changes, etc. Our proposed method can complete the lane detection and tracking more accurately and effectively then existing options.

  20. Brief Report: Broad Autism Phenotype in Adults Is Associated with Performance on an Eye-Tracking Measure of Joint Attention

    Science.gov (United States)

    Swanson, Meghan R.; Siller, Michael

    2014-01-01

    The current study takes advantage of modern eye-tracking technology and evaluates how individuals allocate their attention when viewing social videos that display an adult model who is gazing at a series of targets that appear and disappear in the four corners of the screen (congruent condition), or gazing elsewhere (incongruent condition). Data…

  1. Air Superiority Fighter Characteristics.

    Science.gov (United States)

    1998-06-05

    many a dispute could have been deflated into a single paragraph if the disputants had just dared to define their terms.7 Aristotle ...meaningful. This section will expand on some key ideology concepts. The phrase "air superiority fighter" may bring to mind visions of fighter... biographies are useful in garnering airpower advocate theories as well as identifying key characteristics. Air campaign results, starting with World

  2. Performance evaluation of Maximum Power Point Tracking algorithm with buck dc-dc converter for Solar PV system

    OpenAIRE

    Ahteshamul Haque

    2016-01-01

    The energy crisis concern leads to look for alternate source of energy. Solar energy is considered as most reliable among the all renewable energy sources. Solar PV (Photovoltaic) is used to convert solar energy into electric energy. The efficiency of solar PV is very low and its characteristic is nonlinear. To overcome these drawbacks a technique known as maximum power point tracking is used. This algorithm is implemented in the control circuit of DC – DC converter. The objective...

  3. Leiomyosarcoma of the superior vena cava.

    Science.gov (United States)

    de Chaumont, Arthus; Pierret, Charles; de Kerangal, Xavier; Le Moulec, Sylvestre; Laborde, François

    2014-08-01

    Leiomyosarcoma of the superior vena cava is a very rare tumor and only a few cases have been reported, with various techniques of vascular reconstruction. We describe a new case of leiomyosarcoma of the superior vena cava in a 61-year-old woman with extension to the brachiocephalic arterial trunk. Resection and vascular reconstruction were performed using, respectively, polytetrafluoroethylene and polyethylene terephtalate vascular grafts.

  4. Performance in Magnetic Field of the Bunch and Track Identifier Prototype for the Muon Barrel Trigger: Results of the 2000 Test Beam

    CERN Document Server

    Castellani, Lorenzo; Martinelli, Roberto; Meneguzzo, Anna Teresa; Vanini, Sara; Zotto, Pierluigi

    2001-01-01

    A sample of ASIC prototypes of the first level trigger front-end for the CMS muon barrel drift chambers, the so called Bunch and Track Identifier, was tested on a Superlayer of a chamber prototype with the final cell design. Tests were performed using a collimated muon beam incident on the Superlayer at several angles. The Superlayer was immersed in a magnetic field parallel to the beam. We report on the performance of the tested prototypes with respect to bunch crossing efficiency, resolution and noise. The impact of different setting parameters of the BTI module has been investigated

  5. Human Capital Tracking Tool -

    Data.gov (United States)

    Department of Transportation — AVS is now required to collect, track, and report on data from the following Flight, Business and Workforce Plan. The Human Resource Management’s Performance Target...

  6. LHCb VELO Tracking Resolutions

    CERN Multimedia

    Alexander, Michael

    2011-01-01

    The excellent tracking performance of the Vertex Locator (VELO) at LHCb is presented. The resolutions it achieves on single hits, impact parameters, and primary vertex positions are shown, with particular attention paid to measurement of impact parameters.

  7. Porous nitrogen-doped carbon derived from silk fibroin protein encapsulating sulfur as a superior cathode material for high-performance lithium-sulfur batteries.

    Science.gov (United States)

    Zhang, Jiawei; Cai, Yurong; Zhong, Qiwei; Lai, Dongzhi; Yao, Juming

    2015-11-14

    The features of a carbon substrate are crucial for the electrochemical performance of lithium-sulfur (Li-S) batteries. Nitrogen doping of carbon materials is assumed to play an important role in sulfur immobilisation. In this study, natural silk fibroin protein is used as a precursor of nitrogen-rich carbon to fabricate a novel, porous, nitrogen-doped carbon material through facile carbonisation and activation. Porous carbon, with a reversible capacity of 815 mA h g(-1) at 0.2 C after 60 cycles, serves as the cathode material in Li-S batteries. Porous carbon retains a reversible capacity of 567 mA h g(-1), which corresponds to a capacity retention of 98% at 1 C after 200 cycles. The promising electrochemical performance of porous carbon is attributed to its mesoporous structure, high specific surface area and nitrogen doping into the carbon skeleton. This study provides a general strategy to synthesise nitrogen-doped carbons with a high specific surface area, which is crucial to improve the energy density and electrochemical performance of Li-S batteries.

  8. Contabilidad Financiera Superior

    OpenAIRE

    Ipiñazar Petralanda, Izaskun

    2013-01-01

    Duración (en horas): De 31 a 40 horas. Destinatario: Estudiante y Docente A través de este material se presentan las pautas necesarias para implementar un aprendizaje basado en problemas en la asignatura de Contabilidad Financiera Superior dentro de los temas “Constitución de S.A. y S.R.L.” (Tema 2), “Ampliaciones de Capital” (Tema 3) y “Reducciones de Capital” (Tema 4). En primer lugar se presentan las guías generales de la asignatura, y a continuación, las diferentes activida...

  9. Contabilidad Financiera Superior

    OpenAIRE

    Ipiñazar Petralanda, Izaskun

    2013-01-01

    Duración (en horas): De 31 a 40 horas. Destinatario: Estudiante y Docente A través de este material se presentan las pautas necesarias para implementar un aprendizaje basado en problemas en la asignatura de Contabilidad Financiera Superior dentro de los temas “Constitución de S.A. y S.R.L.” (Tema 2), “Ampliaciones de Capital” (Tema 3) y “Reducciones de Capital” (Tema 4). En primer lugar se presentan las guías generales de la asignatura, y a continuación, las diferentes activida...

  10. Robust feature-based object tracking

    Science.gov (United States)

    Han, Bing; Roberts, William; Wu, Dapeng; Li, Jian

    2007-04-01

    feature points and detecting occlusions/uncovered regions. Experimental results demonstrate the superior performance of the proposed algorithm over the existing methods.

  11. A plum-pudding like mesoporous SiO2/flake graphite nanocomposite with superior rate performance for LIB anode materials.

    Science.gov (United States)

    Li, Huan-Huan; Zhang, Lin-Lin; Fan, Chao-Ying; Wang, Kang; Wu, Xing-Long; Sun, Hai-Zhu; Zhang, Jing-Ping

    2015-09-21

    A novel kind of plum-pudding like mesoporous SiO2 nanospheres (MSNs) and flake graphite (FG) nanocomposite (pp-MSNs/FG) was designed and fabricated via a facile and cost-effective hydrothermal method. Transmission electron microscopy (TEM) analysis showed that most of the MSNs were well anchored on FG. This special architecture has multiple advantages, including FG that offers a conductive framework and hinders the volume expansion effect. Moreover, the porous structure of MSNs could provide more available lithium storage sites and extra free space to accommodate the mechanical strain caused by the volume change during the repeated reversible reaction between Li(+) and active materials. Due to the synergetic effects of its unique plum-pudding structure, the obtained pp-MSNs/FG nanocomposite exhibited a decent reversible capacity of 702 mA h g(-1) (based on the weight of MSNs in the electrode material) after 100 cycles with high Coulombic efficiency above 99% under 100 mA g(-1) and a charge capacity of 239.6 mA h g(-1) could be obtained even under 5000 mA g(-1). Their high rate performance is among the best-reported performances of SiO2-based anode materials.

  12. Polyimide-coated carbon electrodes combined with redox mediators for superior Li-O2 cells with excellent cycling performance and decreased overpotential

    Science.gov (United States)

    Yoon, Seon Hye; Park, Yong Joon

    2017-02-01

    We report an air electrode employing polyimide-coated carbon nanotubes (CNTs) combined with a redox mediator for Li-O2 cells with enhanced electrochemical performance. The polyimide coating on the carbon surface suppresses unwanted side reactions, which decreases the amount of accumulated reaction products on the surface of the air electrode during cycling. The redox mediators lower the overpotential of the Li-O2 cells because they can easily transfer electrons from the electrode to the reaction products. The low overpotential can also decrease the side reactions that activate at a high potential range. Specifically, the CsI redox mediator effectively interrupted dendrite growth on the Li anode during cycling due to the shielding effect of its Cs+ ions and acted as a redox mediator due to its I‑ ions. LiNO3 also facilitates the decrease in side reactions and the stabilization of the Li anode. The synergic effect of the polyimide coating and the electrolyte containing the LiNO3/CsI redox mediator leads to a low overpotential and excellent cycling performance (over 250 cycles with a capacity of 1,500 mAh·gelectrode‑1).

  13. Superior performance of metal-organic frameworks over zeolites as solid acid catalysts in the Prins reaction: green synthesis of nopol.

    Science.gov (United States)

    Opanasenko, Maksym; Dhakshinamoorthy, Amarajothi; Hwang, Young Kyu; Chang, Jong-San; Garcia, Hermenegildo; Čejka, Jiří

    2013-05-01

    The catalytic performance of a set of metal-organic frameworks [CuBTC, FeBTC, MIL-100(Fe), MIL-100(Cr), ZIF-8, MIL-53(Al)] was investigated in the Prins condensation of β-pinene with formaldehyde and compared with the catalytic behavior of conventional aluminosilicate zeolites BEA and FAU and titanosilicate zeolite MFI (TS-1). The activity of the investigated metal-organic frameworks (MOFs) increased with the increasing concentration of accessible Lewis acid sites in the order ZIF-8zeolites BEA and FAU, which showed significantly lower selectivity to the target nopol than the MOFs. Its high activity, the preservation of its structure and active sites, and the possibility to use it in at least three catalytic cycles without loss of activity make MIL-100 (Fe) the best performing catalyst of the series for the Prins condensation of β-pinene and paraformaldehyde. Our report exemplifies the advantages of MOFs over zeolites as solid catalysts in liquid-phase reactions for the production of fine chemicals.

  14. Polyimide-coated carbon electrodes combined with redox mediators for superior Li-O2 cells with excellent cycling performance and decreased overpotential

    Science.gov (United States)

    Yoon, Seon Hye; Park, Yong Joon

    2017-01-01

    We report an air electrode employing polyimide-coated carbon nanotubes (CNTs) combined with a redox mediator for Li-O2 cells with enhanced electrochemical performance. The polyimide coating on the carbon surface suppresses unwanted side reactions, which decreases the amount of accumulated reaction products on the surface of the air electrode during cycling. The redox mediators lower the overpotential of the Li-O2 cells because they can easily transfer electrons from the electrode to the reaction products. The low overpotential can also decrease the side reactions that activate at a high potential range. Specifically, the CsI redox mediator effectively interrupted dendrite growth on the Li anode during cycling due to the shielding effect of its Cs+ ions and acted as a redox mediator due to its I− ions. LiNO3 also facilitates the decrease in side reactions and the stabilization of the Li anode. The synergic effect of the polyimide coating and the electrolyte containing the LiNO3/CsI redox mediator leads to a low overpotential and excellent cycling performance (over 250 cycles with a capacity of 1,500 mAh·gelectrode−1). PMID:28198419

  15. Multisensor Distributed Track Fusion AlgorithmBased on Strong Tracking Filter and Feedback Integration1)

    Institute of Scientific and Technical Information of China (English)

    YANGGuo-Sheng; WENCheng-Lin; TANMin

    2004-01-01

    A new multisensor distributed track fusion algorithm is put forward based on combiningthe feedback integration with the strong tracking Kalman filter. Firstly, an effective tracking gateis constructed by taking the intersection of the tracking gates formed before and after feedback.Secondly, on the basis of the constructed effective tracking gate, probabilistic data association andstrong tracking Kalman filter are combined to form the new multisensor distributed track fusionalgorithm. At last, simulation is performed on the original algorithm and the algorithm presented.

  16. Statistics of superior records

    Science.gov (United States)

    Ben-Naim, E.; Krapivsky, P. L.

    2013-08-01

    We study statistics of records in a sequence of random variables. These identical and independently distributed variables are drawn from the parent distribution ρ. The running record equals the maximum of all elements in the sequence up to a given point. We define a superior sequence as one where all running records are above the average record expected for the parent distribution ρ. We find that the fraction of superior sequences SN decays algebraically with sequence length N, SN˜N-β in the limit N→∞. Interestingly, the decay exponent β is nontrivial, being the root of an integral equation. For example, when ρ is a uniform distribution with compact support, we find β=0.450265. In general, the tail of the parent distribution governs the exponent β. We also consider the dual problem of inferior sequences, where all records are below average, and find that the fraction of inferior sequences IN decays algebraically, albeit with a different decay exponent, IN˜N-α. We use the above statistical measures to analyze earthquake data.

  17. Frenillo labial superior doble

    Directory of Open Access Journals (Sweden)

    Carlos Albornoz López del Castillo

    Full Text Available El frenillo labial superior doble no sindrómico es una anomalía del desarrollo que no hemos encontrado reportada en la revisión bibliográfica realizada. Se presenta una niña de 11 años de edad que fue remitida al servicio de Cirugía Maxilofacial del Hospital "Eduardo Agramonte Piña", de Camagüey, por presentar un frenillo labial superior doble de baja inserción. Se describen los síntomas clínicos asociados a esta anomalía y el tratamiento quirúrgico utilizado para su solución: una frenectomía y plastia sobre la banda muscular frénica anormal que provocaba exceso de tejido en la mucosa labial. Consideramos muy interesante la descripción de este caso, por no haber encontrado reporte similar en la literatura revisada.

  18. Superior electrochemical performance of mesoporous Fe{sub 3}O{sub 4}/CNT nanocomposites as anode material for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Abbas, Syed Mustansar, E-mail: qau_abbas@yahoo.com [Nanoscience and Catalysis Division, National Centre for Physics, Islamabad (Pakistan); Department of Chemistry, Quaid-e-Azam University, Islamabad (Pakistan); Ali, Saqib, E-mail: drsa54@yahoo.com [Department of Chemistry, Quaid-e-Azam University, Islamabad (Pakistan); Niaz, Niaz Ahmad [Department of Physics, Bahauddin Zakariya University, Multan (Pakistan); Ali, Nisar; Ahmed, Rashid [Department of Physics, Faculty of Science, University Teknologi Malaysia, Skudai, Johor (Malaysia); Ahmad, Nisar [Nanoscience and Catalysis Division, National Centre for Physics, Islamabad (Pakistan)

    2014-10-25

    Graphical abstract: The mesoporous Fe{sub 3}O{sub 4}/CNT nanocomposite synthesized via a modified co-precipitation method in combination with subsequent calcination was applied in the negative electrode materials for lithium ion batteries and exhibited high electrochemical performance. - Highlights: • Nanocomposite of functionalized CNTs with Fe{sub 3}O{sub 4} nanoparticles is prepared. • Good quality interfacial adhesion between CNTs and Fe{sub 3}O{sub 4} matrix. • High discharge capacity of 1093 mA h g{sup −1} after 50 cycles. • 50th Cycle coulombic efficiency of 98.4% at a current density of 100 mA g{sup −1}. - Abstract: A series of Fe{sub 3}O{sub 4}/CNT nanocomposites are effectively synthesized by an in situ chemical co-precipitation technique. The structure, morphology and chemical composition of synthesized nanocomposites are analyzed by X-ray diffraction, Rutherford backscattering spectroscopy, scanning electron microscopy, transmission electron microscopy and fourier-transform infrared spectroscopy. The electrochemical performance of synthesized nanocomposites is tested by cyclic voltammetry (CV), charge/discharge studies and electrochemical impedance spectroscopy (EIS). The carbon nanotubes are nicely dispersed in the Fe{sub 3}O{sub 4} nanoparticles for all the nanocomposites. Due to the synergistic effect arising from Fe{sub 3}O{sub 4} nanoparticles and carbon nanotubes, the electrochemical properties of pure Fe{sub 3}O{sub 4} material is considerably enhanced. A discharge capacity of 1093 mA h g{sup −1} is demonstrated by Fe{sub 3}O{sub 4}–7%CNT nanocomposite at a current density of 100 mA g{sup −1} with a high columbic efficiency of 98.4%. Moreover, this nanocomposite shows a stable cycling and rate performance at higher current densities. Hence, based on the above studies, such Fe{sub 3}O{sub 4}/CNT nanocomposite could be a possible contributor for lithium ion batteries.

  19. Synthesis of Pt/K2CO3/MgAlOx–reduced graphene oxide hybrids as promising NOx storage–reduction catalysts with superior catalytic performance

    Science.gov (United States)

    Mei, Xueyi; Yan, Qinghua; Lu, Peng; Wang, Junya; Cui, Yuhan; Nie, Yu; Umar, Ahmad; Wang, Qiang

    2017-02-01

    Pt/K2CO3/MgAlOx–reduced graphene oxide (Pt/K/MgAlOx–rGO) hybrids were synthesized, characterized and tested as a promising NOx storage and reduction (NSR) catalyst. Mg–Al layered double hydroxides (LDHs) were grown on rGO via in situ hydrothermal crystallization. The structure and morphology of samples were thoroughly characterized using various techniques. Isothermal NOx adsorption tests indicated that MgAlOx–rGO hybrid exhibited better NOx trapping performance than MgAlOx, from 0.44 to 0.61 mmol · g‑1, which can be attributed to the enhanced particle dispersion and stabilization. In addition, a series of MgAlOx–rGO loaded with 2 wt% Pt and different loadings (5, 10, 15, and 20 wt%) of K2CO3 (denoted as Pt/K/MgAlOx–rGO) were obtained by sequential impregnation. The influence of 5% H2O on the NOx storage capacity of MgAlOx–rGO loaded with 2 wt% Pt and 10% K2CO3 (2Pt/10 K/MgAlOx–rGO) catalyst was also evaluated. In all, the 2Pt/10 K/MgAlOx–rGO catalyst not only exhibited high thermal stability and NOx storage capacity of 1.12 mmol · g‑1, but also possessed excellent H2O resistance and lean–rich cycling performance, with an overall 78.4% of NOx removal. This work provided a new scheme for the preparation of highly dispersed MgAlOx–rGO hybrid based NSR catalysts.

  20. Synthesis of Pt/K2CO3/MgAlOx–reduced graphene oxide hybrids as promising NOx storage–reduction catalysts with superior catalytic performance

    Science.gov (United States)

    Mei, Xueyi; Yan, Qinghua; Lu, Peng; Wang, Junya; Cui, Yuhan; Nie, Yu; Umar, Ahmad; Wang, Qiang

    2017-01-01

    Pt/K2CO3/MgAlOx–reduced graphene oxide (Pt/K/MgAlOx–rGO) hybrids were synthesized, characterized and tested as a promising NOx storage and reduction (NSR) catalyst. Mg–Al layered double hydroxides (LDHs) were grown on rGO via in situ hydrothermal crystallization. The structure and morphology of samples were thoroughly characterized using various techniques. Isothermal NOx adsorption tests indicated that MgAlOx–rGO hybrid exhibited better NOx trapping performance than MgAlOx, from 0.44 to 0.61 mmol · g−1, which can be attributed to the enhanced particle dispersion and stabilization. In addition, a series of MgAlOx–rGO loaded with 2 wt% Pt and different loadings (5, 10, 15, and 20 wt%) of K2CO3 (denoted as Pt/K/MgAlOx–rGO) were obtained by sequential impregnation. The influence of 5% H2O on the NOx storage capacity of MgAlOx–rGO loaded with 2 wt% Pt and 10% K2CO3 (2Pt/10 K/MgAlOx–rGO) catalyst was also evaluated. In all, the 2Pt/10 K/MgAlOx–rGO catalyst not only exhibited high thermal stability and NOx storage capacity of 1.12 mmol · g−1, but also possessed excellent H2O resistance and lean–rich cycling performance, with an overall 78.4% of NOx removal. This work provided a new scheme for the preparation of highly dispersed MgAlOx–rGO hybrid based NSR catalysts. PMID:28205630

  1. Sparse Hashing Tracking.

    Science.gov (United States)

    Zhang, Lihe; Lu, Huchuan; Du, Dandan; Liu, Luning

    2016-02-01

    In this paper, we propose a novel tracking framework based on a sparse and discriminative hashing method. Different from the previous work, we treat object tracking as an approximate nearest neighbor searching process in a binary space. Using the hash functions, the target templates and the candidates can be projected into the Hamming space, facilitating the distance calculation and tracking efficiency. First, we integrate both the inter-class and intra-class information to train multiple hash functions for better classification, while most classifiers in previous tracking methods usually neglect the inter-class correlation, which may cause the inaccuracy. Then, we introduce sparsity into the hash coefficient vectors for dynamic feature selection, which is crucial to select the discriminative and stable features to adapt to visual variations during the tracking process. Extensive experiments on various challenging sequences show that the proposed algorithm performs favorably against the state-of-the-art methods.

  2. Unscented Kalman filtering for articulated human tracking

    DEFF Research Database (Denmark)

    Boesen Lindbo Larsen, Anders; Hauberg, Søren; Pedersen, Kim Steenstrup

    2011-01-01

    We present an articulated tracking system working with data from a single narrow baseline stereo camera. The use of stereo data allows for some depth disambiguation, a common issue in articulated tracking, which in turn yields likelihoods that are practically unimodal. While current state...... with superior results. Tracking quality is measured by comparing with ground truth data from a marker-based motion capture system....

  3. Performance of a photovoltaic panel connected to a solar tracking; Desempenho de um painel fotovoltaico acoplado a um rastreador solar

    Energy Technology Data Exchange (ETDEWEB)

    Tessaro, Alcione Rodrigo; Souza, Samuel N. Melegari de; Ricieri, Reinaldo Prandini [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil)], Email: artessaro@pop.com.br; Ferruzi, Yuri [Faculdade Assis Gurgacz (FAG), Cascavel, PR (Brazil)

    2006-07-01

    The used photovoltaic panels currently, still possess low an efficiency, around 8,84%. As this efficiency is characteristic of the photovoltaic plate, it was used in this research, a different system of the conventional. This differentiated system nothing more is that a mechanism that makes with that the photovoltaic panel if puts into motion of form to always keep its perpendicular photovoltaic cells to the sun. Of ownership of two monocrystals photovoltaic panels, of same mark and model, it was possible to mount two systems of solar capitation. One of them, installed of the form established in the memorandum of understanding, directed northward geographic to an inclination of 37 deg in relation to the ground, and the other panel mounted in top of a tracking mechanism, that tends to keep the perpendicular photovoltaic cell to the solar rays. The chain samples and tension, had been extracted, in the two systems, conventional and dredge, in intervals of time of forty minutes, being effected in the period of the eight hours of the morning until the six hours of the afternoon, tantalizing 16 samples. The ambient temperature also was collected in these intervals of time. The results had been more satisfactory in the tracking system, more evidenced an energy exploitation of 20,74% and an efficiency of 2,052% than in the system with the conventionally mounted photovoltaic module. (author)

  4. Superiority of branched side chains in spontaneous nanowire formation: exemplified by poly(3-2-methylbutylthiophene) for high-performance solar cells.

    Science.gov (United States)

    Chen, Hsieh-Chih; Wu, I-Che; Hung, Jui-Hsiang; Chen, Fu-Je; Chen, I-Wen P; Peng, Yung-Kang; Lin, Chao-Sung; Chen, Chun-Hsien; Sheng, Yu-Jane; Tsao, Heng-Kwong; Chou, Pi-Tai

    2011-04-18

    One-dimensional nanostructures containing heterojunctions by conjugated polymers, such as nanowires, are expected to greatly facilitate efficient charge transfer in bulk-heterojunction (BHJ) solar cells. Thus, a combined theoretical and experimental approach is pursued to explore spontaneous nanowire formation. A dissipative particle dynamics simulation is first performed to study the morphologies formed by rodlike polymers with various side-chain structures. The results surprisingly predict that conjugated polymers with branched side chains are well suited to form thermodynamically stable nanowires. Proof of this concept is provided via the design and synthesis of a branched polymer of regioregular poly(3-2-methylbutylthiophene) (P3MBT), which successfully demonstrates highly dense nanowire formation free from any stringent conditions and stratagies. In BHJ solar cells fabricated using a blend of P3MBT and [6,6]-phenyl-C71-butyric acid methyl ester (PC(71) BM), P3MBT polymers are self-organized into highly crystalline nanowires with a d(100) spacing of 13.30 Å. The hole mobility of the P3MBT:PC(71) BM (1:0.5 by weight) blend film reaches 3.83 × 10(-4) cm(2) V(-1) s(-1) , and the maximum incident photon-to-current efficiency reaches 68%. The results unambiguously prove the spontaneous formation of nanowires using solution-processable conjugated polymers with branched alkyl side chains in BHJ solar cells.

  5. MnO(x) Nanoparticle-Dispersed CeO2 Nanocubes: A Remarkable Heteronanostructured System with Unusual Structural Characteristics and Superior Catalytic Performance.

    Science.gov (United States)

    Putla, Sudarsanam; Amin, Mohamad Hassan; Reddy, Benjaram M; Nafady, Ayman; Al Farhan, Khalid A; Bhargava, Suresh K

    2015-08-05

    Understanding the interface-induced effects of heteronanostructured catalysts remains a significant challenge due to their structural complexity, but it is crucial for developing novel applied catalytic materials. This work reports a systematic characterization and catalytic evaluation of MnOx nanoparticle-dispersed CeO2 nanocubes for two important industrial applications, namely, diesel soot oxidation and continuous-flow benzylamine oxidation. The X-ray diffraction and Raman studies reveal an unusual lattice expansion in CeO2 after the addition of MnOx. This interesting observation is due to conversion of smaller sized Ce(4+) (0.097 nm) to larger sized Ce(3+) (0.114 nm) in cerium oxide led by the strong interaction between MnOx and CeO2 at their interface. Another striking observation noticed from transmission electron microscopy, high angle annular dark-field scanning transmission electron microscopy, and electron energy loss spectroscopy studies is that the MnOx species are well-dispersed along the edges of the CeO2 nanocubes. This remarkable decoration leads to an enhanced reducible nature of the cerium oxide at the MnOx/CeO2 interface. It was found that MnOx/CeO2 heteronanostructures efficiently catalyze soot oxidation at lower temperatures (50% soot conversion, T50 ∼660 K) compared with that of bare CeO2 nanocubes (T50 ∼723 K). Importantly, the MnOx/CeO2 heteronanostructures exhibit a noticeable steady performance in the oxidation of benzylamine with a high selectivity of the dibenzylimine product (∼94-98%) compared with that of CeO2 nanocubes (∼69-91%). The existence of a strong synergistic effect at the interface sites between the CeO2 and MnOx components is a key factor for outstanding catalytic efficiency of the MnOx/CeO2 heteronanostructures.

  6. Phase Tuning of Nanostructured Gallium Oxide via Hybridization with Reduced Graphene Oxide for Superior Anode Performance in Li-Ion Battery: An Experimental and Theoretical Study.

    Science.gov (United States)

    Patil, Sharad B; Kim, In Young; Gunjakar, Jayavant L; Oh, Seung Mi; Eom, Taedaehyeong; Kim, Hyungjun; Hwang, Seong-Ju

    2015-08-26

    The crystal phase of nanostructured metal oxide can be effectively controlled by the hybridization of gallium oxide with reduced graphene oxide (rGO) at variable concentrations. The change of the ratio of Ga2O3/rGO is quite effective in tailoring the crystal structure and morphology of nanostructured gallium oxide hybridized with rGO. This is the first example of the phase control of metal oxide through a change of the content of rGO hybridized. The calculations based on density functional theory (DFT) clearly demonstrate that the different surface formation energy and Ga local symmetry of Ga2O3 phases are responsible for the phase transition induced by the change of rGO content. The resulting Ga2O3-rGO nanocomposites show promising electrode performance for lithium ion batteries. The intermediate Li-Ga alloy phases formed during the electrochemical cycling are identified with the DFT calculations. Among the present Ga2O3-rGO nanocomposites, the material with mixed α-Ga2O3/β-Ga2O3/γ-Ga2O3 phase can deliver the largest discharge capacity with the best cyclability and rate characteristics, highlighting the importance of the control of Ga2O3/rGO ratio in optimizing the electrode activity of the composite materials. The present study underscores the usefulness of the phase-control of nanostructured metal oxides achieved by the change of rGO content in exploring novel functional nanocomposite materials.

  7. Subcarrier phase recovery performance in bent-pipe mode of Shuttle data transmission. [on Tracking and Data Relay Satellite System Ku-band return link

    Science.gov (United States)

    Mckenzie, T. M.; Braun, W. R.

    1978-01-01

    The subcarrier phase recovery is analyzed for the bent-pipe mode of Space Shuttle detached-payload data transmission on the Tracking and Data Relay Satellite System (TDRSS) Ku-band return link. The high-power component of the subcarrier modulation is unrestored payload data, either at baseband or modulating another subcarrier. At the receiver a Costas loop recovers the subcarrier phase. To analyze its performance in the baseband case, we obtain the loop S-curve, the power spectral density of the equivalent noise process, and the loop phase error variance.

  8. An improved scanning automatic tracking antenna for telemetry applications

    Science.gov (United States)

    Cook, James H., Jr.; Dishman, W. Keith

    The present comparative evaluation of the sequential lobing, conical scan, and single channel monopulse techniques for the generation of offset radar beams gives attention to the performance of a novel, generalized electronic scanned beam configuration, in view of various mission scenario requirements. The innovative 'electronic-scanning' (ESCAN) autotracking technique is elaborated mathematically, and its performance is projected in view of analytical and measured antenna radiation pattern data. The ESCAN tracking antenna concept is shown to have side-lobe characteristics superior to those of previous methods due to their control in the scanned, offset beam plane as well as the orthogonal plane.

  9. Ag/g-C3N4 catalyst with superior catalytic performance for the degradation of dyes: a borohydride-generated superoxide radical approach

    Science.gov (United States)

    Fu, Yongsheng; Huang, Ting; Zhang, Lili; Zhu, Junwu; Wang, Xin

    2015-08-01

    dissolved oxygen in the presence of BH4- and the synergistic effect of Ag nanoparticles and g-C3N4. Electronic supplementary information (ESI) available: The typical experimental details for the color reaction between the ferrous irons (Fe2+) and nitric oxide (NO); MO photodegradation performances in the presence of Ag/g-C3N4 or Ag/g-C3N4/TiO2 nanocomposites; TEM image of the pure g-C3N4 catalyst; The remaining MO, MB and NDY-GL in solution after reaching the adsorption-desorption equilibrium in the dark for 60 min with stirring; Catalytic degradation of MB and NDY-GL over the Ag/g-C3N4-4 catalyst in the presence of BH4- in the dark and under visible light irradiation. See DOI: 10.1039/c5nr03260a

  10. A novel 3D energetic MOF of high energy content: synthesis and superior explosive performance of a Pb(ii) compound with 5,5'-bistetrazole-1,1'-diolate.

    Science.gov (United States)

    Shang, Yu; Jin, Bo; Peng, Rufang; Liu, Qiangqiang; Tan, Bisheng; Guo, Zhicheng; Zhao, Jun; Zhang, Qingchun

    2016-09-21

    The development of high-performance insensitive energetic materials is important because of the increasing demand for these materials in military and civilian applications. A novel 3D energetic metal-organic framework (MOF) of exceptionally high energy content, [Pb(BTO)(H2O)]n, was synthesized and structurally characterized by single crystal X-ray diffraction, featuring a three-dimensional parallelogram porous framework, where BTO represents 5,5'-bistetrazole-1,1'-diolate. The thermal stability and energetic properties were determined, exhibiting good thermostability (Td = 309.0 °C), excellent detonation pressure (P) of 53.06 GPa, a detonation velocity (D) of 9.204 km s(-1), and acceptable sensitivity to confirmed impact (IS = 7.5 J). Notably, the complex possesses unprecedented superior density than the reported energetic MOFs. The results highlight this new MOF as a potential energetic material.

  11. Efficient plasma-enhanced method for layered LiNi1/3Co1/3Mn1/3O2 cathodes with sulfur atom-scale modification for superior-performance Li-ion batteries.

    Science.gov (United States)

    Jiang, Qianqian; Chen, Ning; Liu, Dongdong; Wang, Shuangyin; Zhang, Han

    2016-06-01

    In order to improve the electrochemical performance of LiNi1/3Co1/3Mn1/3O2 as a lithium insertion positive electrode material, atom-scale modification was realized to obtain the layered oxysulfide LiNi1/3Co1/3Mn1/3O2-xSx using a novel plasma-enhanced doping strategy. The structure and electrochemical performance of LiNi1/3Co1/3Mn1/3O2-xSx are investigated systematically, which confirms that the S doping can make the structure stable and benefit the electrochemical performance. The phys-chemical characterizations indicate that oxygen atoms in the initial LiNi1/3Co1/3Mn1/3O2 have been partially replaced by S atoms. It should be pointed out that the atom-scale modification does not significantly alter the intrinsic structure of the cathode. Compared to the pristine material, the LiNi1/3Co1/3Mn1/3O2-xSx shows a superior performance with a higher capacity (200.4 mA h g(-1)) and a significantly improved cycling stability (maintaining 94.46% of its initial discharge capacity after 100 cycles). Moreover, it has an excellent rate performance especially at elevated performance, which is probably due to the faster Li(+) transportation after S doping into the layered structure. All the results show that the atom-scale modification with sulfur atoms on LiNi1/3Co1/3Mn1/3O2, which significantly improved the electrochemical performance, offers a novel anionic doping strategy to realize the atom-scale modification of electrode materials to improve their electrochemical performance.

  12. DeepTrack: Learning Discriminative Feature Representations Online for Robust Visual Tracking.

    Science.gov (United States)

    Hanxi Li; Yi Li; Porikli, Fatih

    2016-04-01

    Deep neural networks, albeit their great success on feature learning in various computer vision tasks, are usually considered as impractical for online visual tracking, because they require very long training time and a large number of training samples. In this paper, we present an efficient and very robust tracking algorithm using a single convolutional neural network (CNN) for learning effective feature representations of the target object in a purely online manner. Our contributions are multifold. First, we introduce a novel truncated structural loss function that maintains as many training samples as possible and reduces the risk of tracking error accumulation. Second, we enhance the ordinary stochastic gradient descent approach in CNN training with a robust sample selection mechanism. The sampling mechanism randomly generates positive and negative samples from different temporal distributions, which are generated by taking the temporal relations and label noise into account. Finally, a lazy yet effective updating scheme is designed for CNN training. Equipped with this novel updating algorithm, the CNN model is robust to some long-existing difficulties in visual tracking, such as occlusion or incorrect detections, without loss of the effective adaption for significant appearance changes. In the experiment, our CNN tracker outperforms all compared state-of-the-art methods on two recently proposed benchmarks, which in total involve over 60 video sequences. The remarkable performance improvement over the existing trackers illustrates the superiority of the feature representations, which are learned purely online via the proposed deep learning framework.

  13. Magnetic resonance imaging evaluation of meniscoid superior labrum: normal variant or superior labral tear*

    Science.gov (United States)

    Simão, Marcelo Novelino; Vinson, Emily N.; Spritzer, Charles E.

    2016-01-01

    Objective The objective of this study was to determine the incidence of a "meniscoid" superior labrum. Materials and Methods This was a retrospective analysis of 582 magnetic resonance imaging examinations of shoulders. Of those 582 examinations, 110 were excluded, for a variety of reasons, and the final analysis therefore included 472 cases. Consensus readings were performed by three musculoskeletal radiologists using specific criteria to diagnose meniscoid labra. Results A meniscoid superior labrum was identified in 48 (10.2%) of the 472 cases evaluated. Arthroscopic proof was available in 21 cases (43.8%). In 10 (47.6%) of those 21 cases, the operative report did not include the mention a superior labral tear, thus suggesting the presence of a meniscoid labrum. In only one of those cases were there specific comments about a mobile superior labrum (i.e., meniscoid labrum). In the remaining 11 (52.4%), surgical correlation demonstrated superior labral tears. Conclusion A meniscoid superior labrum is not an infrequent finding. Depending upon assumptions and the requirement of surgical proof, the prevalence of a meniscoid superior labrum in this study was between 2.1% (surgically proven) and 4.8% (projected). However, superior labral tears are just as common and are often confused with meniscoid labra. PMID:27777474

  14. Research on Train-Track-Bridge Dynamic Performance of Tongling Yangtze River Bridge with Ballastless Track%铜陵长江大桥无砟轨道车线桥动力性能研究

    Institute of Scientific and Technical Information of China (English)

    高芒芒; 熊建珍; 孙加林

    2012-01-01

    Tongling Yangtze River Bridge is a 5-span combined highway and railway cable-stayed bridge with continuous steel truss beam. The overall length of its main bridge is 90 m+240 m+630 m+240 m+ 90 m. The lower layer is He-Fu PDL double-track with 250 km ? H-1 designed speed and Lu-Tong passenger/freight mixing double-track with the speed of 160 km ? H-1. In order to investigate the adaptability for laying ballastless track on large span steel bridge, the dynamic performances of Tongling Yangtze River Bridge and corresponding ballastless track were studied based on preliminary design. Results show that, since orthotropic steel box structure is adopted for the important region, the lateral and torsional stiffness of cross section is obviously strengthened, the transformation curve is gentler and significant deformation diversity does not occur at the region near the beam end. At the same time, the additional pressure which is distributed in the first panel can effectively decrease deck acceleration under high-speed train. Accordingly, Tongling Bridge meets the rigidity requirement for applying ballastless track. From the point of view for running safety, the stiffness of rubber tie-plate in bi-block ballastless track is proposed as 0.1 N ? Mm-3. The analysis shows that instant divorce occurs between almost all the rubber tie-plate and the deck when heavy train passes, and the same phenomenon only occurs in the centre region of the middle span when high-speed train passes. Moreover, changing the stiffness of rubber tie-plate in ballastless track has little influence on such instant divorce.%铜陵长江大桥主桥为90 m+240 m+630 m+240 m+90 m的5跨公铁两用连续钢桁梁斜拉桥,大桥下层为设计时速250 km的合福客专双线和时速160km的合庐铜Ⅰ级线路双线共四线铁路.为考察大跨度钢桥上铺设无砟轨道的适应性,针对铜陵长江大桥和桥上无砟轨道初步设计方案进行车线桥动力性能研究.结果表明:铜陵

  15. Superior-subordinate relations as organizational processes

    DEFF Research Database (Denmark)

    Asmuss, Birte; Aggerholm, Helle Kryger; Oshima, Sae

    Since the emergence of the practice turn in social sciences (Golsorkhi et al. 2010), studies have shown a number of institutionally relevant aspects as achievements across time and by means of various resources (human and non-human) (Taylor & van Every 2000, Cooren et al. 2006). Such a process view...... on organizational practices relates closely to an increased focus on communication as being constitutive of the organization in general and the superior-subordinate relationship in specific. The current study aims to contribute to this line of research by investigating micro-practices involved in establishing...... superior-subordinate relations in a specific institutionalized setting: performance appraisal interviews (PAIs). While one main task of PAIs is to manage and integrate organizational and employee performance (Fletcher, 2001:473), PAIs are also organizational practices where superior-subordinate relations...

  16. Prediction of College Performance of Superior Students.

    Science.gov (United States)

    Roberts, Roy J.

    1965-01-01

    Using 857 male National Merit Finalists and Commended Students, scales to predict 1st year college grades and science, writing, art, music, speech, and leadership achievement were developed by analysis of 906 pre-college questionnaire items. Two item analysis strategies were used: responses of achieving subjects (S's) and general samples of…

  17. Performance Attributional Effects on Feedback from Superiors

    Science.gov (United States)

    1981-06-01

    of the task and the general procedure. He then administered the Wonderlic Per- sonnel Test. Following completion of the test, a "random drawing" was...Upon arrival at the experimental session, the supervisor 7 and the three confederates were all administered the Wonderlic Personnel Test. Following

  18. Delegation: A Competency of Superior Performers?

    Science.gov (United States)

    1982-12-01

    subordinate, distribution of power and responsibility. Henri Fayol does no better with this subject in his classic fourteen principles of management. He...Structure and Behavior, Litterer, Joseph A., Wiley and Sons, Inc., New York, 1963. 4. Fayol , Henri , "General Principles of Management", from Classics...chain, As with Weber, Fayol concerns himself with systems in which positional delegation can occur, rather than with the individualized action this

  19. Sobredentadura total superior implantosoportada

    Directory of Open Access Journals (Sweden)

    Luis Orlando Rodríguez García

    2010-06-01

    Full Text Available Se presenta un caso de un paciente desdentado total superior, rehabilitado en la consulta de implantología de la Clínica "Pedro Ortiz" del municipio Habana del Este en Ciudad de La Habana, Cuba, en el año 2009, mediante prótesis sobre implantes osteointegrados, técnica que se ha incorporado a la práctica estomatológica en Cuba como alternativa al tratamiento convencional en los pacientes desdentados totales. Se siguió un protocolo que comprendió una fase quirúrgica, procedimiento con o sin realización de colgajo y carga precoz o inmediata. Se presenta un paciente masculino de 56 años de edad, que acudió a la consulta multidisciplinaria, preocupado, porque se le habían elaborado tres prótesis en los últimos dos años y ninguna reunía los requisitos de retención que él necesitaba para sentirse seguro y cómodo con las mismas. El resultado final fue la satisfacción total del paciente, con el mejoramiento de la calidad estética y funcional.

  20. Exponential Tracking Control Using Backstepping Approach for Voltage-Based Control of a Flexible Joint Electrically Driven Robot

    Directory of Open Access Journals (Sweden)

    Jean Bosco Mbede

    2014-01-01

    Full Text Available This paper addresses the design of exponential tracking control using backstepping approach for voltage-based control of a flexible joint electrically driven robot (EFJR, to cope with the difficulty introduced by the cascade structure in EFJR dynamic model, to deal with flexibility in joints, and to ensure fast tracking performance. Backstepping approach is used to ensure global asymptotic stability and its common algorithm is modified such that the link position and velocity errors converge to zero exponentially fast. In contrast with the other backstepping controller for electrically driven flexible joint robot manipulators control problem, the proposed controller is robust with respect to stiffness uncertainty and allows tracking fast motions. Simulation results are presented for both single link flexible joint electrically driven manipulator and 2-DOF flexible joint electrically driven robot manipulator. These simulations show very satisfactory tracking performances and the superiority of the proposed controller to those performed in the literature using simple backstepping methodology.

  1. Performance of Tracking, b-tagging and Jet/MET reconstruction at the CMS High Level Trigger

    CERN Document Server

    Tosi, Mia

    2015-01-01

    The trigger systems of the LHC detectors play a crucial role in determining the physics capabilities of experiments. In 2015, the center-of-mass energy of proton-proton collisions will reach 13 TeV up to an unprecedented luminosity of 1e34 cm-2s-1. A reduction of several orders of magnitude of the event rate is needed to reach values compatible with detector readout, offline storage and analysis capabilities. The CMS experiment has been designed with a two-level trigger system the Level-1 Trigger (L1T), implemented on custom-designed electronics, and the High Level Trigger (HLT), a streamlined version of the offline reconstruction software running on a computer farm. A software trigger system requires a trade-off between the complexity of the algorithms, the sustainable output rate, and the selection efficiency. With the computing power available during the 2012 data taking the maximum reconstruction time at HLT was about 200 ms per event, at the nominal L1T rate of 100 kHz. Tracking algorithms are widely us...

  2. Tracking Methods to Study the Surface Regression of the Solid-Propellant Grain

    Directory of Open Access Journals (Sweden)

    Yao Hsin Hwang

    2014-10-01

    Full Text Available In the work, we have successfully developed practical surface tracking methods to calculate the erosive volume and the associated burning areas which are the important parameters to solve a nonlinear, pressurization-rate dependent combustion ballistics. Three methodologies, namely the front tracking, the emanating ray and the least distance methods, are proposed. The front tracking method is based on the Lagrangian point of view; while both the emanating ray and the least distance methods are formulated from the Eulerian viewpoint. Two two-dimensional test problems have been examined to compare with the programming complexity, simulation accuracy and required CPU time of the proposed methods. It is found that the least distance method performs superior to the other two methods in numerical respects. The least distance method is implemented with tetrahedron grids to track the outward propagation of a three-dimensional cubic. Comparison between the predicted erosive volume and corresponding theoretical result yields satisfactory agreement.

  3. Immediate Feedback on Accuracy and Performance: The Effects of Wireless Technology on Food Safety Tracking at a Distribution Center

    Science.gov (United States)

    Goomas, David T.

    2012-01-01

    The effects of wireless ring scanners, which provided immediate auditory and visual feedback, were evaluated to increase the performance and accuracy of order selectors at a meat distribution center. The scanners not only increased performance and accuracy compared to paper pick sheets, but were also instrumental in immediate and accurate data…

  4. Superior oblique surgery: when and how?

    Directory of Open Access Journals (Sweden)

    Taylan Şekeroğlu H

    2013-08-01

    Full Text Available Hande Taylan Şekeroğlu,1 Ali Sefik Sanac,1 Umut Arslan,2 Emin Cumhur Sener11Department of Ophthalmology, 2Department of Biostatistics, Hacettepe University Faculty of Medicine, Ankara, TurkeyBackground: The purpose of this paper is to review different types of superior oblique muscle surgeries, to describe the main areas in clinical practice where superior oblique surgery is required or preferred, and to discuss the preferred types of superior oblique surgery with respect to their clinical outcomes.Methods: A consecutive nonrandomized retrospective series of patients who had undergone superior oblique muscle surgery as a single procedure were enrolled in the study. The diagnosis, clinical features, preoperative and postoperative vertical deviations in primary position, type of surgery, complications, and clinical outcomes were reviewed. The primary outcome measures were the type of strabismus and the type of superior oblique muscle surgery. The secondary outcome measure was the results of the surgeries.Results: The review identified 40 (20 male, 20 female patients with a median age of 6 (2–45 years. Nineteen patients (47.5% had Brown syndrome, eleven (27.5% had fourth nerve palsy, and ten (25.0% had horizontal deviations with A pattern. The most commonly performed surgery was superior oblique tenotomy in 29 (72.5% patients followed by superior oblique tuck in eleven (27.5% patients. The amount of vertical deviation in the fourth nerve palsy and Brown syndrome groups (P = 0.01 for both and the amount of A pattern in the A pattern group were significantly reduced postoperatively (P = 0.02.Conclusion: Surgery for the superior oblique muscle requires experience and appropriate preoperative evaluation in view of its challenging nature. The main indications are Brown syndrome, fourth nerve palsy, and A pattern deviations. Superior oblique surgery may be effective in terms of pattern collapse and correction of vertical deviations in primary

  5. Object tracking by transitive learning using perspective transformation

    Science.gov (United States)

    Zheng, Chao; Wei, Zhenzhong

    2016-10-01

    Object tracking is a core subject in computer vision and has significant meaning in both theory and practice. In this paper, we propose a novel tracking method, in which a robust discriminative classifier is built basing on both object and context information. In this method, we consider multiple frames of local invariant features on and around the object, and construct the object template and context template. To overcome the limitation of the invariant representations, we also design a non-parametric learning algorithm using transitive matching perspective transformation, which is called as LUPT (Learning Using Perspective Transformation). This learning algorithm can keep adding new object appearance into the object template and avoid improper updating when occlusions appear. In this paper, we also analyze the asymptotic stability of our method and prove its drift-free capability in long term tracking. Extensive experiments using challenging publicly available video sequences that cover most of the critical conditions in tracking demonstrate the enhanced strength and robustness of our method. Moreover, in comparison with several state-of -the-art tracking systems, our method shows superior performance in most of cases, especially in long time sequences.

  6. Superior Na-Storage Performance of Low-Temperature-Synthesized Na3(VO(1-x)PO4)2F(1+2x) (0≤x≤1) Nanoparticles for Na-Ion Batteries.

    Science.gov (United States)

    Qi, Yuruo; Mu, Linqin; Zhao, Junmei; Hu, Yong-Sheng; Liu, Huizhou; Dai, Sheng

    2015-08-17

    Na-ion batteries are becoming comparable to Li-ion batteries because of their similar chemical characteristics and abundant sources of sodium. However, the materials production should be cost-effective in order to meet the demand for large-scale application. Here, a series of nanosized high-performance cathode materials, Na3(VO(1-x)PO4)2F(1+2x) (0≤x≤1), has been synthesized by a solvothermal low-temperature (60-120 °C) strategy without the use of organic ligands or surfactants. The as-synthesized Na3(VOPO4)2F nanoparticles show the best Na-storage performance reported so far in terms of both high rate capability (up to 10 C rate) and long cycle stability over 1200 cycles. To the best of our knowledge, the current developed synthetic strategy for Na3(VO(1-x)PO4)2F(1+2x) is by far one of the least expensive and energy-consuming methods, much superior to the conventional high-temperature solid-state method. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. A Study on the Dynamic Performance for Hydraulically Damped Rubber Bushings with Multiple Inertia Tracks and Orifices: Parameter Identification and Modeling

    Directory of Open Access Journals (Sweden)

    Chao-Feng Yang

    2016-01-01

    Full Text Available Hydraulically damped rubber bushings (HDBs are important for vehicle noise, vibration, and harshness (NVH performance as they are able to decay the vehicle’s oscillation induced by engine and road. The dynamic stiffness and loss angle of an HDB are crucial and it is significant to investigate the relations between the design parameters with the dynamic stiffness and loss angle. Therefore, the force-deflection relation of the HDB is measured statically and the dynamic stiffness and loss angle are measured dynamically and the test data are analyzed with a view to examine how the measurement results are influenced by the design parameters (the number of the fluid tracks. Compared with the results predicted by a nonlinear lumped parameter model whose parameters are extracted by a parameter identification technique, using the model, the effect of the main rubber and the fluid track on the dynamic stiffness and the loss angle is investigated. A unified analytical model of HDB is also developed with the purpose of predicting the static and dynamic characteristics, and the predictions are shown to be well correlated with the measurement data. The good correlation suggests the validity of the model and the parameter identification implementation.

  8. Performance of a new electron-tracking Compton camera under intense radiations from a water target irradiated with a proton beam

    CERN Document Server

    Matsuoka, Yatsuoka; Kubo, H; Takada, A; Parker, J D; Mizumoto, T; Mizumura, Y; Iwaki, S; Sawano, T; Komura, S; Kishimoto, T; Oda, M; Takemura, T; Miyamoto, S; Sonoda, S; Tomono, D; Miuchi, K; Kabuki, S; Kurosawa, S

    2014-01-01

    We have developed an electron-tracking Compton camera (ETCC) for use in next-generation MeV gamma ray telescopes. An ETCC consists of a gaseous time projection chamber (TPC) and pixel scintillator arrays (PSAs). Since the TPC measures the three dimensional tracks of Compton-recoil electrons, the ETCC can completely reconstruct the incident gamma rays. Moreover, the ETCC demonstrates efficient background rejection power in Compton-kinematics tests, identifies particle from the energy deposit rate (dE/dX) registered in the TPC, and provides high quality imaging by completely reconstructing the Compton scattering process. We are planning the "Sub-MeV gamma ray Imaging Loaded-on-balloon Experiment" (SMILE) for our proposed all-sky survey satellite. Performance tests of a mid-sized 30 cm-cubic ETCC, constructed for observing the Crab nebula, are ongoing. However, observations at balloon altitudes or satellite orbits are obstructed by radiation background from the atmosphere and the detector itself. The background ...

  9. Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system

    Science.gov (United States)

    Abdullah, L.; Jamaludin, Z.; Rafan, N. A.; Jamaludin, J.; Chiew, T. H.

    2013-12-01

    At present, positioning plants in machine tools are looking for high degree of accuracy and robustness attributes for the purpose of compensating various disturbance forces. The objective of this paper is to assess the tracking performance of Cascade P/PI, Nonlinear PID (NPID) and Nonlinear cascade (N-Cascade) controller with the existence of disturbance forces in the form of cutting forces. Cutting force characteristics at different cutting parameters; such as spindle speed rotations is analysed using Fast Fourier Transform. The tracking performance of a Nonlinear cascade controller in presence of these cutting forces is compared with NPID controller and Cascade P/PI controller. Robustness of these controllers in compensating different cutting characteristics is compared based on reduction in the amplitudes of cutting force harmonics using Fast Fourier Transform. It is found that the N-cascade controller performs better than both NPID controller and Cascade P/PI controller. The average percentage error reduction between N-cascade controller and Cascade P/PI controller is about 65% whereas the average percentage error reduction between cascade controller and NPID controller is about 82% at spindle speed of 3000 rpm spindle speed rotation. The finalized design of N-cascade controller could be utilized further for machining application such as milling process. The implementation of N-cascade in machine tools applications will increase the quality of the end product and the productivity in industry by saving the machining time. It is suggested that the range of the spindle speed could be made wider to accommodate the needs for high speed machining.

  10. Deep 6-DOF Tracking.

    Science.gov (United States)

    Garon, Mathieu; Lalonde, Jean-Francois

    2017-08-10

    We present a temporal 6-DOF tracking method which leverages deep learning to achieve state-of-the-art performance on challenging datasets of real world capture. Our method is both more accurate and more robust to occlusions than the existing best performing approaches while maintaining real-time performance. To assess its efficacy, we evaluate our approach on several challenging RGBD sequences of real objects in a variety of conditions. Notably, we systematically evaluate robustness to occlusions through a series of sequences where the object to be tracked is increasingly occluded. Finally, our approach is purely data-driven and does not require any hand-designed features: robust tracking is automatically learned from data.

  11. SU-E-J-142: Performance Study of Automatic Image-Segmentation Algorithms in Motion Tracking Via MR-IGRT

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Y; Olsen, J.; Parikh, P.; Noel, C; Wooten, H; Du, D; Mutic, S; Hu, Y [Washington University, St. Louis, MO (United States); Kawrakow, I; Dempsey, J [Washington University, St. Louis, MO (United States); ViewRay Co., Oakwood Village, OH (United States)

    2014-06-01

    Purpose: Evaluate commonly used segmentation algorithms on a commercially available real-time MR image guided radiotherapy (MR-IGRT) system (ViewRay), compare the strengths and weaknesses of each method, with the purpose of improving motion tracking for more accurate radiotherapy. Methods: MR motion images of bladder, kidney, duodenum, and liver tumor were acquired for three patients using a commercial on-board MR imaging system and an imaging protocol used during MR-IGRT. A series of 40 frames were selected for each case to cover at least 3 respiratory cycles. Thresholding, Canny edge detection, fuzzy k-means (FKM), k-harmonic means (KHM), and reaction-diffusion level set evolution (RD-LSE), along with the ViewRay treatment planning and delivery system (TPDS) were included in the comparisons. To evaluate the segmentation results, an expert manual contouring of the organs or tumor from a physician was used as a ground-truth. Metrics value of sensitivity, specificity, Jaccard similarity, and Dice coefficient were computed for comparison. Results: In the segmentation of single image frame, all methods successfully segmented the bladder and kidney, but only FKM, KHM and TPDS were able to segment the liver tumor and the duodenum. For segmenting motion image series, the TPDS method had the highest sensitivity, Jarccard, and Dice coefficients in segmenting bladder and kidney, while FKM and KHM had a slightly higher specificity. A similar pattern was observed when segmenting the liver tumor and the duodenum. The Canny method is not suitable for consistently segmenting motion frames in an automated process, while thresholding and RD-LSE cannot consistently segment a liver tumor and the duodenum. Conclusion: The study compared six different segmentation methods and showed the effectiveness of the ViewRay TPDS algorithm in segmenting motion images during MR-IGRT. Future studies include a selection of conformal segmentation methods based on image/organ-specific information

  12. The relationship between regional transport superiority and regional economic performance in Hainan%海南省区域交通优势度与经济发展关系

    Institute of Scientific and Technical Information of China (English)

    黄晓燕; 曹小曙; 李涛

    2011-01-01

    This study takes Hainan as a case and its 18 counties as basic unit for analysis.Choosing 3 indexes, including transport network density, proximity and accessibility, this paper constituted the spatial mathematical model to evaluate transport superiority degree firstly. Then, by utilizing GIS and IDW (Inverse Distance Weighted) technology, this paper studied spatial characteristic of transport network in Hainan. Moreover, we selected 4 aspects, i. e., total economic output and industrial structure, population and urbanization,living standards, transportation and the urban construction, 20 indexes all together and uses SPSS16.0 software with principal component analysis to quantitatively evaluate the level of economic development. By analysing spatial characteristic and summarizing spatial disciplinarian, this paper studied the relationship between regional transport superiority and economic performance in Hainan. The results showed that there were great differences in spatial distribution patterns between accessibility and economic development. But the spatial distribution patterns of transport superiority and regional economic performance are coherent, and there are positive relations between them, which showed an opposite spatial arrangement with geographic characteristics in Hainan.%以海南省为例,选取县级及以上城市为研究节点,采用交通网络密度、邻近度、通达性等指标,构建区域交通优势度综合评价的数理模型,运用GIS网络分析技术及IDW空间插值法定量分析海南省交通网络的地域空间特征.选取了经济总量和产业结构、人口与城市化、人民生活水平、交通与城市建设等4方面共20项主要的经济指标,运用SPSS软件用主成分分析法定量分析海南省区域经济差异及空间格局.通过对海南省各县市交通优势度及经济发展水平的特点及空问结构性规律进行分析,并比较二者间的联系,结果表明:海南省通达性空间格

  13. The performance of the γ-ray tracking array GRETINA for γ-ray spectroscopy with fast beams of rare isotopes

    Science.gov (United States)

    Weisshaar, D.; Bazin, D.; Bender, P. C.; Campbell, C. M.; Recchia, F.; Bader, V.; Baugher, T.; Belarge, J.; Carpenter, M. P.; Crawford, H. L.; Cromaz, M.; Elman, B.; Fallon, P.; Forney, A.; Gade, A.; Harker, J.; Kobayashi, N.; Langer, C.; Lauritsen, T.; Lee, I. Y.; Lemasson, A.; Longfellow, B.; Lunderberg, E.; Macchiavelli, A. O.; Miki, K.; Momiyama, S.; Noji, S.; Radford, D. C.; Scott, M.; Sethi, J.; Stroberg, S. R.; Sullivan, C.; Titus, R.; Wiens, A.; Williams, S.; Wimmer, K.; Zhu, S.

    2017-03-01

    The γ-ray tracking array GRETINA was coupled to the S800 magnetic spectrometer for spectroscopy with fast beams of rare isotopes at the National Superconducting Cyclotron Laboratory on the campus of Michigan State University. We describe the technical details of this powerful setup and report on GRETINA's performance achieved with source and in-beam measurements. The γ-ray multiplicity encountered in experiments with fast beams is usually low, allowing for a simplified and efficient treatment of the data in the γ-ray analysis in terms of Doppler reconstruction and spectral quality. The results reported in this work were obtained from GRETINA consisting of 8 detector modules hosting four high-purity germanium crystals each. Currently, GRETINA consists of 10 detector modules.

  14. E-waste: collect more, treat better; Tracking take-back system performance for eco-efficient electronics recycling

    NARCIS (Netherlands)

    Wang, F.

    2014-01-01

    This dissertation establishes a methodology for evaluating the performance of take-back and treatment systems for end-oflife electronics (e-waste). First, a comprehensive classification is developed to fully understand the complex characteristics of e-waste. A multivariate model is then created to q

  15. Absorbed in the task : Personality measures predict engagement during task performance as tracked by error negativity and asymmetrical frontal activity

    NARCIS (Netherlands)

    Tops, Mattie; Boksem, Maarten A. S.

    2010-01-01

    We hypothesized that interactions between traits and context predict task engagement, as measured by the amplitude of the error-related negativity (ERN), performance, and relative frontal activity asymmetry (RFA). In Study 1, we found that drive for reward, absorption, and constraint independently p

  16. MATERIAL TRACKING USING LANMAS

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, F.

    2010-06-07

    LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

  17. T'ain't what you say, it's the way that you say it--left insula and inferior frontal cortex work in interaction with superior temporal regions to control the performance of vocal impersonations.

    Science.gov (United States)

    McGettigan, Carolyn; Eisner, Frank; Agnew, Zarinah K; Manly, Tom; Wisbey, Duncan; Scott, Sophie K

    2013-11-01

    Historically, the study of human identity perception has focused on faces, but the voice is also central to our expressions and experiences of identity [Belin, P., Fecteau, S., & Bedard, C. Thinking the voice: Neural correlates of voice perception. Trends in Cognitive Sciences, 8, 129-135, 2004]. Our voices are highly flexible and dynamic; talkers speak differently, depending on their health, emotional state, and the social setting, as well as extrinsic factors such as background noise. However, to date, there have been no studies of the neural correlates of identity modulation in speech production. In the current fMRI experiment, we measured the neural activity supporting controlled voice change in adult participants performing spoken impressions. We reveal that deliberate modulation of vocal identity recruits the left anterior insula and inferior frontal gyrus, supporting the planning of novel articulations. Bilateral sites in posterior superior temporal/inferior parietal cortex and a region in right middle/anterior STS showed greater responses during the emulation of specific vocal identities than for impressions of generic accents. Using functional connectivity analyses, we describe roles for these three sites in their interactions with the brain regions supporting speech planning and production. Our findings mark a significant step toward understanding the neural control of vocal identity, with wider implications for the cognitive control of voluntary motor acts.

  18. Bayesian Tracking of Visual Objects

    Science.gov (United States)

    Zheng, Nanning; Xue, Jianru

    Tracking objects in image sequences involves performing motion analysis at the object level, which is becoming an increasingly important technology in a wide range of computer video applications, including video teleconferencing, security and surveillance, video segmentation, and editing. In this chapter, we focus on sequential Bayesian estimation techniques for visual tracking. We first introduce the sequential Bayesian estimation framework, which acts as the theoretic basis for visual tracking. Then, we present approaches to constructing representation models for specific objects.

  19. Absorbed in the task: Personality measures predict engagement during task performance as tracked by error negativity and asymmetrical frontal activity.

    Science.gov (United States)

    Tops, Mattie; Boksem, Maarten A S

    2010-12-01

    We hypothesized that interactions between traits and context predict task engagement, as measured by the amplitude of the error-related negativity (ERN), performance, and relative frontal activity asymmetry (RFA). In Study 1, we found that drive for reward, absorption, and constraint independently predicted self-reported persistence. We hypothesized that, during a prolonged monotonous task, absorption would predict initial ERN amplitudes, constraint would delay declines in ERN amplitudes and deterioration of performance, and drive for reward would predict left RFA when a reward could be obtained. Study 2, employing EEG recordings, confirmed our predictions. The results showed that most traits that have in previous research been related to ERN amplitudes have a relationship with the motivational trait persistence in common. In addition, trait-context combinations that are likely associated with increased engagement predict larger ERN amplitudes and RFA. Together, these results support the hypothesis that engagement may be a common underlying factor predicting ERN amplitude.

  20. PROPOSAL FOR STRATEGIZING THE SALES ORGANIZATION : Improving the current sales performance of MHG Tracking service in Russia

    OpenAIRE

    2011-01-01

    The rising competition pressure and customer expectations make companies concentrate more on how the selling could better convey the results of the marketing to a successful outcome. The role of a sales organization in the overall business performance is particularly significant when strategic customer relationships have a high commercial value and require differentiated and advanced approaches. An efficient organization and management of sales activities corresponding to the corporate long–t...

  1. EYE GAZE TRACKING

    DEFF Research Database (Denmark)

    2017-01-01

    This invention relates to a method of performing eye gaze tracking of at least one eye of a user, by determining the position of the center of the eye, said method comprising the steps of: detecting the position of at least three reflections on said eye, transforming said positions to spanning...... a normalized coordinate system spanning a frame of reference, wherein said transformation is performed based on a bilinear transformation or a non linear transformation e.g. a möbius transformation or a homographic transformation, detecting the position of said center of the eye relative to the position...... of said reflections and transforming this position to said normalized coordinate system, tracking the eye gaze by tracking the movement of said eye in said normalized coordinate system. Thereby calibration of a camera, such as knowledge of the exact position and zoom level of the camera, is avoided...

  2. Superior-subordinate relations as organizational processes

    DEFF Research Database (Denmark)

    Asmuss, Birte; Aggerholm, Helle Kryger; Oshima, Sae

    Since the emergence of the practice turn in social sciences (Golsorkhi et al. 2010), studies have shown a number of institutionally relevant aspects as achievements across time and by means of various resources (human and non-human) (Taylor & van Every 2000, Cooren et al. 2006). Such a process view...... superior-subordinate relations in a specific institutionalized setting: performance appraisal interviews (PAIs). While one main task of PAIs is to manage and integrate organizational and employee performance (Fletcher, 2001:473), PAIs are also organizational practices where superior-subordinate relations...... are shaped, (re)confirmed and re-evaluated. This paper pursues the better understanding of the latter aspect by looking at one substantial and recurrent activity in PAIs: the evaluation of employee performance. One resource for doing the evaluation work is making assessments (e.g. Goodwin & Goodwin, 1987...

  3. Increasing Performance of Professional Soccer Players and Elite Track and Field Athletes with Peak Performance Training and Biofeedback: A Pilot Study

    OpenAIRE

    Rijken, Noortje H.; Soer, Remko; de Maar, Ewold; Prins, Hilco; Teeuw, Wouter B.; Peuscher, Jan; Oosterveld, Frits G. J.

    2016-01-01

    The aim of this pilot study was to investigate the effects of an intervention consisting of mental coaching combined with either electro encephalogram (EEG) alpha power feedback or heart rate variability (HRV) feedback on HRV, EEG outcomes and self-reported factors related to stress, performance, recovery and sleep quality in elite athletes. A prospective pilot study was performed with two distinct cohorts. Soccer players were provided with four sessions of mental coaching combined with daily...

  4. Infrared dim target tracking based on guide filter and Bayes classification

    Science.gov (United States)

    Qian, Kun; Zhou, Hui-xin; Qin, Han-lin; Song, Shang-zhen; Zhao, Dong; Wang, Bing-jian

    2016-10-01

    An infrared dim and small tracking is proposed based on an explicit image filter - guided filter. The guided filter utilizes the structure in the guidance image and performs as an edge-preserving smoothing operator. The superior performance depending on the guidance image is critical advantage for target tracking. First, the guided filter can help to preserve the detail of the valuable templates and make the inaccurate ones blurry so that the tracker can distinguish the target from numerous bad templates easily. Besides, the filter can recover the content of the small target being influenced according to the guidance image, helping to alleviate the drifting problem effectively. Finally, the candidate samples are utilized to train an effective Bayes classifier to generate a robust tracker, which is easy to be implemented. Experimental results demonstrate that the presented method can track the target effectively, compared with several classical methods. Experimental results show that the proposed algorithm outperforms relative trackers in the accuracy and the robustness.

  5. Sliding mode tracking control for miniature unmanned helicopters

    Directory of Open Access Journals (Sweden)

    Bin Xian

    2015-02-01

    Full Text Available A sliding mode control design for a miniature unmanned helicopter is presented. The control objective is to let the helicopter track some predefined velocity and yaw trajectories. A new sliding mode control design method is developed based on a linearized dynamic model. In order to facilitate the control design, the helicopter’s dynamic model is divided into two subsystems, such as the longitudinal-lateral and the heading-heave subsystem. The proposed controller employs sliding mode control technique to compensate for the immeasurable flapping angles’ dynamic effects and external disturbances. The global asymptotic stability (GAS of the closed-loop system is proved by the Lyapunov based stability analysis. Numerical simulations demonstrate that the proposed controller can achieve superior tracking performance compared with the proportional-integral-derivative (PID and linear-quadratic regulator (LQR cascaded controller in the presence of wind gust disturbances.

  6. Sliding mode tracking control for miniature unmanned helicopters

    Institute of Scientific and Technical Information of China (English)

    Xian Bin; Guo Jianchuan; Zhang Yao; Zhao Bo

    2015-01-01

    A sliding mode control design for a miniature unmanned helicopter is presented. The control objective is to let the helicopter track some predefined velocity and yaw trajectories. A new sliding mode control design method is developed based on a linearized dynamic model. In order to facilitate the control design, the helicopter’s dynamic model is divided into two subsystems, such as the longitudinal-lateral and the heading-heave subsystem. The proposed controller employs sliding mode control technique to compensate for the immeasurable flapping angles’ dynamic effects and external disturbances. The global asymptotic stability (GAS) of the closed-loop system is proved by the Lyapunov based stability analysis. Numerical simulations demonstrate that the proposed controller can achieve superior tracking performance compared with the proportional-integral-derivative (PID) and linear-quadratic regulator (LQR) cascaded controller in the presence of wind gust disturbances.

  7. Tracking control of robot manipulators via output feedback linearization

    Institute of Scientific and Technical Information of China (English)

    FEI Yue-nong; Wu Qing-hua

    2006-01-01

    This paper presents a robot manipulator tracking controller based on output feedback linearization.A sliding mode perturbation observer (SPO) is designed to estimate unmeasurable states and system perturbations that involve system nonlinearities,disturbances and unmodelled dynamics.The use of SPO allows to input/output linearize and decouple the strongly coupled nonlinear robot manipulator system merely by the feedback of joint angles.The controller design does not need an accurate model of the robot manipulator.Simulation studies are undertaken based on a two-link robot manipulator to evaluate the proposed approach.The simulation results show that the proposed controller has more superior tracking control performance,with payload changing in a wide range,in comparison with a sliding mode controller (SMC) designed based on state feedback linearization with full states available.

  8. Tracking Lung Tumors in Orthogonal X-Rays

    Directory of Open Access Journals (Sweden)

    Feng Li

    2013-01-01

    Full Text Available This paper presents a computationally very efficient, robust, automatic tracking method that does not require any implanted fiducials for low-contrast tumors. First, it generates a set of motion hypotheses and computes corresponding feature vectors in local windows within orthogonal-axis X-ray images. Then, it fits a regression model that maps features to 3D tumor motions by minimizing geodesic distances on motion manifold. These hypotheses can be jointly generated in 3D to learn a single 3D regression model or in 2D through back projection to learn two 2D models separately. Tumor is tracked by applying regression to the consecutive image pairs while selecting optimal window size at every time. Evaluations are performed on orthogonal X-ray videos of 10 patients. Comparative experimental results demonstrate superior accuracy (~1 pixel average error and robustness to varying imaging artifacts and noise at the same time.

  9. MERITXELL: The Multifrequency Experimental Radiometer with Interference Tracking for Experiments over Land and Littoral-Instrument Description, Calibration and Performance.

    Science.gov (United States)

    Querol, Jorge; Tarongí, José Miguel; Forte, Giuseppe; Gómez, José Javier; Camps, Adriano

    2017-05-10

    MERITXELL is a ground-based multisensor instrument that includes a multiband dual-polarization radiometer, a GNSS reflectometer, and several optical sensors. Its main goals are twofold: to test data fusion techniques, and to develop Radio-Frequency Interference (RFI) detection, localization and mitigation techniques. The former is necessary to retrieve complementary data useful to develop geophysical models with improved accuracy, whereas the latter aims at solving one of the most important problems of microwave radiometry. This paper describes the hardware design, the instrument control architecture, the calibration of the radiometer, and several captures of RFI signals taken with MERITXELL in urban environment. The multiband radiometer has a dual linear polarization total-power radiometer topology, and it covers the L-, S-, C-, X-, K-, Ka-, and W-band. Its back-end stage is based on a spectrum analyzer structure which allows to perform real-time signal processing, while the rest of the sensors are controlled by a host computer where the off-line processing takes place. The calibration of the radiometer is performed using the hot-cold load procedure, together with the tipping curves technique in the case of the five upper frequency bands. Finally, some captures of RFI signals are shown for most of the radiometric bands under analysis, which evidence the problem of RFI in microwave radiometry, and the limitations they impose in external calibration.

  10. MERITXELL: The Multifrequency Experimental Radiometer with Interference Tracking for Experiments over Land and Littoral—Instrument Description, Calibration and Performance

    Science.gov (United States)

    Querol, Jorge; Tarongí, José Miguel; Forte, Giuseppe; Gómez, José Javier; Camps, Adriano

    2017-01-01

    MERITXELL is a ground-based multisensor instrument that includes a multiband dual-polarization radiometer, a GNSS reflectometer, and several optical sensors. Its main goals are twofold: to test data fusion techniques, and to develop Radio-Frequency Interference (RFI) detection, localization and mitigation techniques. The former is necessary to retrieve complementary data useful to develop geophysical models with improved accuracy, whereas the latter aims at solving one of the most important problems of microwave radiometry. This paper describes the hardware design, the instrument control architecture, the calibration of the radiometer, and several captures of RFI signals taken with MERITXELL in urban environment. The multiband radiometer has a dual linear polarization total-power radiometer topology, and it covers the L-, S-, C-, X-, K-, Ka-, and W-band. Its back-end stage is based on a spectrum analyzer structure which allows to perform real-time signal processing, while the rest of the sensors are controlled by a host computer where the off-line processing takes place. The calibration of the radiometer is performed using the hot-cold load procedure, together with the tipping curves technique in the case of the five upper frequency bands. Finally, some captures of RFI signals are shown for most of the radiometric bands under analysis, which evidence the problem of RFI in microwave radiometry, and the limitations they impose in external calibration. PMID:28489056

  11. Fixed Scan Area Tracking with Track Splitting Filtering Algorithm

    DEFF Research Database (Denmark)

    Hussain, Dil Muhammad Akbar; Ahmed, Zaki

    2006-01-01

    to develop procedures that would enable a more general performance assessment. Therefore, a non-deterministic scenario is adopted, which basically provide a more appropriate approach for the evaluation of a tracking system based on track splitting filter algorithm.  The objects are generated within a fixed...

  12. Effect of inclination and position of new swimming starting block's back plate on track-start performance.

    Science.gov (United States)

    Takeda, Tsuyoshi; Takagi, Hideki; Tsubakimoto, Shozo

    2012-09-01

    This study investigated the effects of both anterior-posterior position and inclination of a back plate positioned on a starting platform on swimming start performance. Ten male college swimmers performed eight starts with varying combinations of take-off angle (normal and lower), inclination angle (10 degrees, 25 degrees, 45 degrees, and 65 degrees) and position (0.29, 0.44, and 0.59 m from the front edge of the starting block). Two-way repeated measures analysis of variance (ANOVA; take-off angle x backplate) for four conditions with take-off angles (normal and lower) and inclinations (10 degrees and 45 degrees), and one-way ANOVA for comparisons between four inclinations and three positions were carried out. Multiple comparisons were made using Bonferroni's method. The main effects of the take-off angle were on the vertical and resultant take-off velocities [F(1,18) = 36.72, p < 0.001 and F(1,18) = 9.58, p = 0.013, respectively]. Comparisons between the plate positions showed that the 5 m time of the 0.29 m condition was significantly longer, the take-off angle and vertical take-off velocity of the 0.59 m condition were significantly lower, and horizontal and resultant take-off velocities of the 0.29 m condition were significantly less. Rear foot take-off times were significantly longer in the ascending order: 0.29, 0.44, and 0.59 m.

  13. Flight Activity and Crew Tracking System -

    Data.gov (United States)

    Department of Transportation — The Flight Activity and Crew Tracking System (FACTS) is a Web-based application that provides an overall management and tracking tool of FAA Airmen performing Flight...

  14. Increasing Performance of Professional Soccer Players and Elite Track and Field Athletes with Peak Performance Training and Biofeedback : A Pilot Study

    NARCIS (Netherlands)

    Rijken, Noortje H.; Soer, Remko; de Maar, Ewold; Prins, Hilco; Teeuw, Wouter B.; Peuscher, Jan; Oosterveld, Frits G. J.

    2016-01-01

    The aim of this pilot study was to investigate the effects of an intervention consisting of mental coaching combined with either electro encephalogram (EEG) alpha power feedback or heart rate variability (HRV) feedback on HRV, EEG outcomes and self-reported factors related to stress, performance, re

  15. Increasing Performance of Professional Soccer Players and Elite Track and Field Athletes with Peak Performance Training and Biofeedback : A Pilot Study

    NARCIS (Netherlands)

    Rijken, Noortje H.; Soer, Remko; de Maar, Ewold; Prins, Hilco; Teeuw, Wouter B.; Peuscher, Jan; Oosterveld, Frits G. J.

    2016-01-01

    The aim of this pilot study was to investigate the effects of an intervention consisting of mental coaching combined with either electro encephalogram (EEG) alpha power feedback or heart rate variability (HRV) feedback on HRV, EEG outcomes and self-reported factors related to stress, performance,

  16. O impacto do desempenho das instituições de educação básica na qualidade do ensino superior El impacto del desempeño de las instituciones de educación básica en la calidad de la educación superior The impact of the performance of basic education institutions in the quality of higher education

    Directory of Open Access Journals (Sweden)

    Maria Cristina Nogueira Gramani

    2011-09-01

    Full Text Available Esta pesquisa analisou a eficiência educacional das Unidades Federativas (UF do Brasil, relacionando o desempenho das instituições de Educação Básica com a qualidade alcançada pelas instituições do ensino superior. Além disso, investigou-se em qual nível da Educação Básica devem alocar-se esforços para melhoria da eficiência educacional de cada UF. A eficiência educacional foi medida considerando a relação entre o índice de qualidade do Ensino Superior (produto e o desempenho da Educação Básica (insumos. O desempenho da educação básica levou em consideração o Índice de Desenvolvimento da Educação Básica (Ideb, já a qualidade do Ensino Superior foi determinada pelo Índice Geral de Cursos (IGC. Através de uma técnica denominada Data Envelopment Analysis, foram identificadas as UFs mais eficientes e as metas de melhoria para as menos eficientes. Os resultados indicaram ainda que, em geral, os anos iniciais do Ensino Fundamental merecem maior atenção por parte dos gestores e governantes.Este estudio analizó la eficiencia educacional de las Unidades de la Federación (UF en Brasil, relacionando el desempeño de las instituciones de la educación básica con la calidad de la educación superior. Además, se investigó en qué nivel de la educación básica se deben destinar los esfuerzos para mejorar la eficiencia educacional de cada estado. La eficiencia educacional se midió teniendo en cuenta la relación entre el índice de calidad de la enseñanza superior (producto y el rendimiento de la educación básica (insumos. El desempeño de la educación básica tuvo en cuenta el Índice de Desarrollo de la Educación Básica (IDEB, ya que la calidad de la educación superior fue determinada por el Índice General de Cursos (IGC. La técnica conocida como Análisis Exploratorio de Datos (DEA se utilizó para identificar la UF más eficiente y las metas de mejora para los menos eficientes. Los resultados también se

  17. Effects of the experimental manipulation of Fourier components of naturalistic imagery on search performance and eye-tracking behavior

    Science.gov (United States)

    Pinkus, Alan R.; Garrett, James S.; Paul, Tiffany M.; Pantle, Allan J.

    2015-05-01

    Historically, visual search experiments used artificial stimuli (simple shapes) as targets and distractors arranged in an imaginary array of cells on a blank background. Little research on search behavior has been conducted with naturalistic stimuli and a frequency-domain framework. With the common metric provided by Fourier analysis, it is possible to compare the effects of various frequency-domain components on search efficiency.1 In the current study, we experimentally manipulated the spectral content of target and distractor (background) cells filled with spatially filtered segments of real-life scenes. Our experimental design included two types of spatial filters, orientation (some frequency overlap between target and distractor) and spatial frequency (no overlap), and uniform distractor (target and distractors filtered similarly) and mixed distractor (only half distractors filtered like the target) conditions. Generally, observers found the target more quickly and were more confident in their performance in the mixed condition. Observers were faster, more accurate, and more confident in the spatial filter condition than in the orientation filter condition. Overall, observers spent less time (fixation duration) and effort (fixation frequency) examining dissimilar distractors. The effect with the fixation frequency measure was magnified when the spatial frequency filter was used.

  18. Analysis on Anti-tracking Jamming Performance of VHF/UHF Frequency-hopping Communication%超短波跳频通信抗跟踪式干扰性能分析

    Institute of Scientific and Technical Information of China (English)

    杨明; 陈静

    2014-01-01

    The tracking jamming is the most effective jamming mode of frequency-hopping communication. In order to analyze thoroughly the anti-tracking jamming performance of VHF/UHF frequency-hopping communication, the frequency-hopping communication principle and tracking jamming principle are analyzed. The anti-tracking jamming capability is mainly studied in different jamming tracking probability and time-resident conditions by simulations to obtain the corresponding bit error rate curve. The simulation results provide the theoretical reference for anti-tracking jamming test and application of VHF/UHF frequency-hopping com-munication.%当前对付跳频通信最有效的干扰方式为跟踪式干扰。为深入分析超短波跳频通信抗跟踪式干扰的性能,对跳频通信原理及跟踪式干扰原理进行了分析,采用仿真方法重点研究了不同干扰跟踪概率与驻留时间条件下的抗跟踪式干扰能力,并得到了相应的误码率曲线,仿真结果为超短波跳频通信抗跟踪式干扰测试与应用提供了理论参考。

  19. Avaliação do desempenho ambiental de uma instituição pública de ensino técnico e superior Environmental performance assessment of a public institution of technical and undergraduate education

    Directory of Open Access Journals (Sweden)

    Thomaz Sessegolo Marques de Almeida

    2012-01-01

    Full Text Available O objetivo deste artigo foi relatar um estudo de caso baseado em indicadores ambientais categóricos no qual foi avaliado o desempenho ambiental de uma instituição pública de ensino técnico e superior. A revisão incluiu a série de normas ISO 14000, o Prêmio Nacional de Qualidade em Saneamento (PNQS e o Ecoblock. O método usado foi adaptado do SBP, um conjunto de procedimentos para a mensuração do desempenho ambiental de uma atividade antrópica, que se vale de construtos latentes e indicadores categóricos que expliquem o desempenho. Os indicadores foram organizados em sete construtos. Segundo os avaliadores e o modelo, a instituição faz 56,7% do máximo possível em gestão ambiental. Os construtos mais carentes foram gestão de resíduos sólidos e poluição sonora. O resultado da avaliação pode ser usado para reformulação da política ambiental da instituição.This article reports a case study in which the environmental performance of a public institution of higher and technical education was evaluated, based on environmental indicators in spades. The following standards series were reviewed: ISO 14000, National Quality Award in Sanitation (PNQS and Ecoblock. The method was adapted from SBP, a set of procedures for measuring the environmental performance of an anthropic activity, composed by latent constructs and categorical indicators that explain the performance. The indicators were organized in seven constructs. According to the assessed respondents and the model, the institution reached 56.7% of the maximum possible in environmental management. Lower constructs were management of solid waste and noise pollution. The evaluation can be used for reshaping the environmental policy of the institution.

  20. Final Report - Effect of Magnetic Configuration on Spheromak Performances, FY2000 - FY2001, Tracking No.00-SI-008

    Energy Technology Data Exchange (ETDEWEB)

    Hill, D N; Hooper, E B; McLean, H S; Stallard, B W; Woodruff, S; Wood, R D

    2002-02-06

    This is the final report on LDRD SI-funded research to determine the Effect of Magnetic Field Configurations on Spheromak Performance for the years FY2000-FY2001, during which a new set of bias magnetic field coils was used to change the vacuum magnetic field configuration of the SSPX spheromak at LLNL. The USDOE Office of Fusion Energy Science funded the routine operation of the SSPX facility during FY00 and FY01. A photo of the SSPX facility as it appeared in mid-FY01, appears in this report. The main distinctive feature of the spheromak is that currents in the plasma itself produce the confining toroidal magnetic field, rather than a complex set of external coils. The Sustained Spheromak Physics Experiment (SSPX) device was designed and built study how well the spheromak can contain plasma energy while dynamo processes in the plasma maintain the confining magnetic fields. The spheromak potentially offers advantages over other fusion reactor concepts because it is compact, has no field coils linking the vacuum vessel, and can be operated in a steady state with voltage applied to external electrodes. It is predicted that the ability of the SSPX to contain the plasma thermal energy will increase with increasing plasma electron temperature; that is, the hotter it is, the better it will work. Our near-term goal for the SSPX facility is to determine which of several magnetic field configurations works best to produce hot, well-confined spheromak plasmas. We also want to verify the predicted inverse relation between plasma temperature and heat loss, and to use these results to design an even higher-temperature follow-on experiment that will push closer to fusion conditions. New features of the SSPX spheromak include a large-radius coaxial plasma injector to improve efficiency, a conformal flux conserver to minimize open field lines around the plasma, a divertor to aid in cold-particle exhaust, and the programmable-bias magnetic field coils to vary the magnetic geometry

  1. Data-driven spatially-adaptive metric adjustment for visual tracking.

    Science.gov (United States)

    Jiang, Nan; Liu, Wenyu

    2014-04-01

    Matching visual appearances of the target over consecutive video frames is a fundamental yet challenging task in visual tracking. Its performance largely depends on the distance metric that determines the quality of visual matching. Rather than using fixed and predefined metric, recent attempts of integrating metric learning-based trackers have shown more robust and promising results, as the learned metric can be more discriminative. In general, these global metric adjustment methods are computationally demanding in real-time visual tracking tasks, and they tend to underfit the data when the target exhibits dynamic appearance variation. This paper presents a nonparametric data-driven local metric adjustment method. The proposed method finds a spatially adaptive metric that exhibits different properties at different locations in the feature space, due to the differences of the data distribution in a local neighborhood. It minimizes the deviation of the empirical misclassification probability to obtain the optimal metric such that the asymptotic error as if using an infinite set of training samples can be approximated. Moreover, by taking the data local distribution into consideration, it is spatially adaptive. Integrating this new local metric learning method into target tracking leads to efficient and robust tracking performance. Extensive experiments have demonstrated the superiority and effectiveness of the proposed tracking method in various tracking scenarios.

  2. Um indicador para a avaliação do desempenho docente em instituições de ensino superior Un Indicador para la evaluación del desempeño docente en instituciones de enseñanza superior An indicator for the evaluation of the teaching performance in teaching institutions

    Directory of Open Access Journals (Sweden)

    Marcelo Embiruçu

    2010-12-01

    Full Text Available Este trabalho propõe a criação de um indicador de avaliação docente (IAD, objetivo e quantitativo, para ser utilizado como um instrumento da avaliação do desempenho de docentes em Instituições de Ensino Superior. Este indicador é aderente aos indicadores institucionais estabelecidos pelo Programa de Apoio a Planos de Reestruturação e Expansão das Universidades Federais (REUNI e procura também contemplar aspectos importantes para um indicador deste tipo, tais como robustez e exogenia, além de considerar ainda aspectos importantes da atuação universitária, tais como afastamentos, gestão acadêmica, atividades de extensão e produção científica qualificada, não contemplados na formulação original dos indicadores do REUNI. São incluídos também outros aspectos fundamentais, tais como a qualidade da graduação e a taxa de conclusão da pós-graduação. Assim, o índice faz uma avaliação docente bastante completa na medida em que considera todas as principais atividades docentes, quais sejam, ensino, pesquisa, extensão e gestão acadêmica, tanto na graduação quanto na pós-graduação. Os resultados apresentados mostram que o indicador é robusto e que o alcance das metas propostas é razoavelmente factível, podendo este ser utilizado como um instrumento útil para a política e a gestão acadêmica das instituições, de forma harmonizada com os programas e políticas de governo e de estado. Alguns parâmetros do indicador podem ser ajustados a fim de satisfazer metas e políticas específicas das instituições.Este trabajo propone la creación de un indicador de evaluación docente (IAD, objetivo y cuantitativo, con el objeto de utilizarlo como instrumento de evaluación del funcionamiento de profesores en instituciones de Enseñanza Superior. Este indicador se basa en Indicadores institucionales establecidos por el REUNI (Programa de Apoyo a Planes de Reestructuración y Expansión de las Universidades Federales

  3. Clean tracks for ATLAS

    CERN Multimedia

    2006-01-01

    First cosmic ray tracks in the integrated ATLAS barrel SCT and TRT tracking detectors. A snap-shot of a cosmic ray event seen in the different layers of both the SCT and TRT detectors. The ATLAS Inner Detector Integration Team celebrated a major success recently, when clean tracks of cosmic rays were detected in the completed semiconductor tracker (SCT) and transition radiation tracker (TRT) barrels. These tracking tests come just months after the successful insertion of the SCT into the TRT (See Bulletin 09/2006). The cosmic ray test is important for the experiment because, after 15 years of hard work, it is the last test performed on the fully assembled barrel before lowering it into the ATLAS cavern. The two trackers work together to provide millions of channels so that particles' tracks can be identified and measured with great accuracy. According to the team, the preliminary results were very encouraging. After first checks of noise levels in the final detectors, a critical goal was to study their re...

  4. Tracking Porters

    DEFF Research Database (Denmark)

    Bruun, Maja Hojer; Krause-Jensen, Jakob; Saltofte, Margit

    2015-01-01

    Anthropology attempts to gain insight into people's experiential life-worlds through long-term fieldwork. The quality of anthropological knowledge production, however, does not depend solely on the duration of the stay in the field, but also on a particular way of seeing social situations. The an...... the students followed the work of a group of porters. Drawing on anthropological concepts and research strategies the students gained crucial insights about the potential effects of using tracking technologies in the hospital....

  5. Error tracking control for underactuated overhead cranes against arbitrary initial payload swing angles

    Science.gov (United States)

    Zhang, Menghua; Ma, Xin; Rong, Xuewen; Tian, Xincheng; Li, Yibin

    2017-02-01

    This paper exploits an error tracking control method for overhead crane systems for which the error trajectories for the trolley and the payload swing can be pre-specified. The proposed method does not require that the initial payload swing angle remains zero, whereas this requirement is usually assumed in conventional methods. The significant feature of the proposed method is its superior control performance as well as its strong robustness over different or uncertain rope lengths, payload masses, desired positions, initial payload swing angles, and external disturbances. Owing to the same attenuation behavior, the desired error trajectory for the trolley for each traveling distance is not needed to be reset, which is easy to implement in practical applications. By converting the error tracking overhead crane dynamics to the objective system, we obtain the error tracking control law for arbitrary initial payload swing angles. Lyapunov techniques and LaSalle's invariance theorem are utilized to prove the convergence and stability of the closed-loop system. Simulation and experimental results are illustrated to validate the superior performance of the proposed error tracking control method.

  6. Tracking of deformable objects

    Science.gov (United States)

    Aswani, Parimal; Wong, K. K.; Chong, Man N.

    2000-12-01

    Tracking of moving-objects in image sequences is needed for several video processing applications such as content-based coding, object oriented compression, object recognition and more recently for video object plane extraction in MPEG-4 coding. Tracking is a natural follow-up of motion-based segmentation. It is a fast and efficient method to achieve coherent motion segments along the temporal axis. Segmenting out moving objects for each and every frame in a video sequence is a computationally expensive approach. Thus, for better performance, semi-automatic segmentation is an acceptable compromise as automatic segmentation approaches rely heavily on prior assumptions. In semi-automatic segmentation approaches, motion-segmentation is performed only on the initial frame and the moving object is tracked in subsequent frames using tracking algorithms. In this paper, a new model for object tracking is proposed, where the image features -- edges, intensity pattern, object motion and initial keyed-in contour (by the user) form the prior and likelihood model of a Markov Random Field (MRF) model. Iterated Conditional Mode (ICM) is used for the minimization of the global energy for the MRF model. The motion segment for each frame is initialized using the segment information from the previous frame. For the initial frame, the motion segment is obtained by manually keying in the object contour. The motion-segments obtained using the proposed model are coherent and accurate. Experimental results on tracking using the proposed algorithm for different sequences -- Bream, Alexis and Claire are presented in this paper. The results obtained are accurate and can be used for a variety of applications including MPEG-4 Video Object Plane (VOP) extraction.

  7. An Artificial Measurements-Based Adaptive Filter for Energy-Efficient Target Tracking via Underwater Wireless Sensor Networks.

    Science.gov (United States)

    Chen, Huayan; Zhang, Senlin; Liu, Meiqin; Zhang, Qunfei

    2017-04-27

    We study the problem of energy-efficient target tracking in underwater wireless sensor networks (UWSNs). Since sensors of UWSNs are battery-powered, it is impracticable to replace the batteries when exhausted. This means that the battery life affects the lifetime of the whole network. In order to extend the network lifetime, it is worth reducing the energy consumption on the premise of sufficient tracking accuracy. This paper proposes an energy-efficient filter that implements the tradeoff between communication cost and tracking accuracy. Under the distributed fusion framework, local sensors should not send their weak information to the fusion center if their measurement residuals are smaller than the pre-given threshold. In order to guarantee the target tracking accuracy, artificial measurements are generated to compensate for those unsent real measurements. Then, an adaptive scheme is derived to take full advantages of the artificial measurements-based filter in terms of energy-efficiency. Furthermore, a computationally efficient optimal sensor selection scheme is proposed to improve tracking accuracy on the premise of employing the same number of sensors. Simulation demonstrates that our scheme has superior advantages in the tradeoff between communication cost and tracking accuracy. It saves much energy while loosing little tracking accuracy or improves tracking performance with less additional energy cost.

  8. 羧基功能化和表面活性剂修饰对石墨烯电化学性能的影响%Superior Electrochemical Performance of Graphene via Carboxyl Functionalization and Surfactant Intercalation

    Institute of Scientific and Technical Information of China (English)

    于建华; 许丽丽; 朱倩倩; 王晓霞; 云茂金; 董立峰

    2016-01-01

    通过简单的两步溶液法对石墨烯进行羧基接枝和表面活性剂修饰,并研究其电化学性能。研究结果表明,与纯石墨烯(比电容50 F/g)相比,表面活性剂本身并不能有效提高石墨烯的比电容(45 F/g),羧基功能化可以将石墨烯的比电容提高至130 F/g。而羧基功能化和表面活性剂修饰双处理工艺能够将石墨烯的比电容提高到230 F/g,且经800次充放电循环后其比电容仍然具有95%的保持率,表明该材料具有良好的循环稳定性。因此,调控石墨烯的表面化学特性对提高其电化学性能具有重要的意义。%Superior capacitance of carboxyl functionalized and surfactant-intercalated graphene were prepared by a relatively simple with two-step solution-based processing technique. In comparison to pristine graphene, surface car-boxyl functionalization and surfactant intercalation can tailor its specific capacitance from 50 F/g to 230 F/g. Mean-while, the modified materials retain more than 95% of their capacitance after 800 charge-discharge cycles, demon-strating good cyclic stability. Surfactant itself cannot improve the performance of pristine graphene as graphene inter-calated with surfactant has a specific capacitance of 45 F/g, however, carboxyl groups can dramatically enhance spe-cific capacitance to 130 F/g. The excellent performance of functionalized graphene emphasizes the importance of con-trolling its surface chemistry.

  9. Efeito da fisioterapia no desempenho funcional do membro superior no pós-operatório de câncer de mama = Physical therapy effects on upper functional performance after breast cancer surgery

    OpenAIRE

    Rett,Mariana Tirolli

    2013-01-01

    Objetivo: Verificar o efeito da fisioterapia na amplitude de movimento (ADM) e no desempenho funcional do membro superior homolateral no pós-operatório para tratamento do câncer de mama e correlacionar estas variáveis Materiais e Métodos: Série de casos envolvendo mulheres submetidas à cirurgia unilateral para tratamento do câncer de mama, associado à linfadenectomia axilar. A ADM foi mensurada nos dois membros superiores através da goniometria, sendo o membro contralateral à cirurgia cons...

  10. Development of Design Technology on Thermal-Hydraulic Performance in Tight-Lattice Rod Bundles: III - Numerical Evaluation of Fluid Mixing Phenomena using Advanced Interface-Tracking Method -

    Science.gov (United States)

    Yoshida, Hiroyuki; Nagayoshi, Takuji; Takase, Kazuyuki; Akimoto, Hajime

    Thermal-hydraulic design of the current boiling water reactor (BWR) is performed by correlations with empirical results of actual-size tests. However, for the Innovative Water Reactor for Flexible Fuel Cycle (FLWR) core, an actual size test of an embodiment of its design is required to confirm or modify such correlations. Development of a method that enables the thermal-hydraulic design of nuclear reactors without these actual size tests is desired, because these tests take a long time and entail great cost. For this reason we developed an advanced thermal-hydraulic design method for FLWRs using innovative two-phase flow simulation technology. In this study, detailed Two-Phase Flow simulation code using advanced Interface Tracking method: TPFIT is developed to calculate the detailed information of the two-phase flow. We tried to verify the TPFIT code by comparing it with the 2-channel air-water and steam-water mixing experimental results. The predicted result agrees well the observed results and bubble dynamics through the gap and cross flow behavior could be effectively predicted by the TPFIT code, and pressure difference between fluid channels is responsible for the fluid mixing.

  11. Performing gait analysis within the timed up & go assessment test: comparison of aTUG to a marker-based tracking system.

    Science.gov (United States)

    Frenken, Thomas; Lohmann, Okko; Frenken, Melina; Steen, Enno-Edzard; Hein, Andreas

    2014-01-01

    Results from a technical validation of the aTUG (ambient Timed Up & Go) system are presented. The approach's gait analysis capabilities were compared to a gold standard: SIMI Motion, a marker-based motion tracking system. Seven people participated and computation of step length and step duration happened with a median error of 3 cm (IQR 3 cm) respectively 0.08 s (IQR 0.07 s). These results show that aTUG has a measurement precision which is sufficient for use in clinical gait analysis and enables the use of the device without a gold standard, i.e. in hospitals outside laboratories or in the homes of patients. aTUG is an approach and system that utilizes only ambient sensor technologies to support the execution of geriatric mobility assessment tests and to perform a gait analysis simultaneously. Such capabilities are strongly demanded in order to support physicians in executing the geriatric assessment tests frequently and objectively in professional and domestic environments. The latter may enable more early prevention and more sustainable rehabilitation.

  12. Large Radius Tracking at the ATLAS Experiment

    CERN Document Server

    Lutz, Margaret Susan; The ATLAS collaboration

    2017-01-01

    Many exotics and SUSY models include particles which are long lived resulting in decays which are highly displaced from the proton-proton interaction point (IP). The standard track reconstruction algorithm used by the ATLAS collaboration is optimized for tracks from “primary” particles, which originate close to the IP. Thus, tight restrictions on the transverse and longitudinal impact parameters, as well as on several other tracking variables, are applied to improve the track reconstruction performance and to reduce the fake rate. This track reconstruction is very efficient for primary particles, but not for the non-prompt particles mentioned above.  In order to reconstruct tracks with large impact parameters due to displaced decays, a tracking algorithm has been optimized to re-run with loosened requirements over the hits left over after standard track reconstruction has finished. Enabling this “retracking” has significantly increased the efficiency of reconstructing tracks from displaced decays, wh...

  13. High Resolution Tracking Devices Based on Capillaries Filled with Liquid Scintillator

    CERN Multimedia

    Bonekamper, D; Vassiltchenko, V; Wolff, T

    2002-01-01

    %RD46 %title\\\\ \\\\The aim of the project is to develop high resolution tracking devices based on thin glass capillary arrays filled with liquid scintillator. This technique provides high hit densities and a position resolution better than 20 $\\mu$m. Further, their radiation hardness makes them superior to other types of tracking devices with comparable performance. Therefore, the technique is attractive for inner tracking in collider experiments, microvertex devices, or active targets for short-lived particle detection. High integration levels in the read-out based on the use of multi-pixel photon detectors and the possibility of optical multiplexing allow to reduce considerably the number of output channels, and, thus, the cost for the detector.\\\\ \\\\New optoelectronic devices have been developed and tested: the megapixel Electron Bombarded CCD (EBCCD), a high resolution image-detector having an outstanding capability of single photo-electron detection; the Vacuum Image Pipeline (VIP), a high-speed gateable pi...

  14. 75 FR 28542 - Superior Resource Advisory Committee

    Science.gov (United States)

    2010-05-21

    ... orient the new Superior Resource Advisory Committee members on their roles and responsibilities. DATES... of the roles and responsibilities of the Superior Resource Advisory Committee members; Election of... Forest Service Superior Resource Advisory Committee AGENCY: Forest Service, USDA. ACTION: Notice...

  15. Bernoulli particle filter with observer altitude for maritime radiation source tracking in the presence of measurement uncertainty

    Institute of Scientific and Technical Information of China (English)

    Luo Xiaobo; Fan Hongqi; Song Zhiyong; Fu Qiang

    2013-01-01

    For maritime radiation source target tracking in particular electronic counter measures (ECM) environment, there exists two main problems which can deteriorate the tracking perfor-mance of traditional approaches. The first problem is the poor observability of the radiation source. The second one is the measurement uncertainty which includes the uncertainty of the target appear-ing/disappearing and the detection uncertainty (false and missed detections). A novel approach is proposed in this paper for tracking maritime radiation source in the presence of measurement uncertainty. To solve the poor observability of maritime radiation source target, using the radiation source motion restriction, the observer altitude information is incorporated into the bearings-only tracking (BOT) method to obtain the unique target localization. Then the two uncertainties in the ECM environment are modeled by the random finite set (RFS) theory and the Bernoulli filtering method with the observer altitude is adopted to solve the tracking problem of maritime radiation source in such context. Simulation experiments verify the validity of the proposed approach for tracking maritime radiation source, and also demonstrate the superiority of the method compared with the traditional integrated probabilistic data association (IPDA) method. The tracking perfor-mance under different conditions, particularly those involving different duration of radiation source opening and switching-off, indicates that the method to solve our problem is robust and effective.

  16. [The superior laryngeal nerve and the superior laryngeal artery].

    Science.gov (United States)

    Lang, J; Nachbaur, S; Fischer, K; Vogel, E

    1987-01-01

    Length, diameter and anastomoses of the nervus vagus and its ganglion inferius were measured 44 halved heads. On the average, 8.65 fiber bundles of the vagus nerve leave the retro-olivary area. In the area of the jugular foramen is the near superior ganglion of the 10th cranial nerve. In this area were found 1.48 (mean value) anastomoses with the 9th cranial nerve. 11.34 mm below the margo terminalis sigmoidea branches off the ramus internus of the accessory nerve which has a length of 9.75 mm. Further anastomoses with the 10th cranial nerve were found. The inferior ganglion of the 10th nerve had a length of 25.47 mm and a diameter of 3.46 mm. Five mm below the ganglion the 10th nerve had a width of 2.9 and a thickness of 1.5 mm. The mean length of the superior sympathetic ganglion was 26.6 mm, its width 7.2 and its thickness 3.4 mm. In nearly all specimens anastomoses of the superior sympathetic ganglion with the ansa cervicalis profunda and the inferior ganglion of the 10th cranial nerve were found. The superior laryngeal nerve branches off about 36 mm below the margo terminalis sigmoidea. The width of this nerve was 1.9 mm, its thickness 0.8 mm on the right and 1.0 mm on the left side. The division in the internal and external rami was found about 21 mm below its origin. Between the n. vagus and thyreohyoid membrane the ramus internus had a length of 64 mm, the length of external ramus between the vagal nerve and the inferior pharyngeal constrictor muscle was 89 mm. Its mean length below the thyreopharyngeal part was 10.7 mm, 8.6 branchlets to the cricothyroid muscle were counted. The superior laryngeal artery had its origin in 80% of cases in the superior thyroideal artery, in 6.8% this vessel was a branch of the external carotid artery. Its average outer diameter was 1.23 mm on the right side and 1.39 mm on the left. The length of this vessel between its origin and the thyreohyoid membrane was 34 mm. In 7% on the right side and in 13% on the left, the superior