WorldWideScience

Sample records for superior thermal properties

  1. Highly Porous, Rigid-Rod Polyamide Aerogels with Superior Mechanical Properties and Unusually High Thermal Conductivity.

    Science.gov (United States)

    Williams, Jarrod C; Nguyen, Baochau N; McCorkle, Linda; Scheiman, Daniel; Griffin, Justin S; Steiner, Stephen A; Meador, Mary Ann B

    2017-01-18

    We report here the fabrication of polyamide aerogels composed of poly-p-phenylene-terephthalamide, the same backbone chemistry as DuPont's Kevlar. The all-para-substituted polymers gel without the use of cross-linker and maintain their shape during processing-an improvement over the meta-substituted cross-linked polyamide aerogels reported previously. Solutions containing calcium chloride (CaCl2) and para-phenylenediamine (pPDA) in N-methylpyrrolidinone (NMP) at low temperature are reacted with terephthaloyl chloride (TPC). Polymerization proceeds over the course of 5 min resulting in gelation. Removal of the reaction solvent via solvent exchange followed by extraction with supercritical carbon dioxide provides aerogels with densities ranging from 0.1 to 0.3 g/cm(3), depending on the concentration of calcium chloride, the formulated number of repeat units, n, and the concentration of polymer in the reaction mixture. These variables were assessed in a statistical experimental study to understand their effects on the properties of the aerogels. Aerogels made using at least 30 wt % CaCl2 had the best strength when compared to aerogels of similar density. Furthermore, aerogels made using 30 wt % CaCl2 exhibited the lowest shrinkage when aged at elevated temperatures. Notably, whereas most aerogel materials are highly insulating (thermal conductivities of 10-30 mW/m K), the polyamide aerogels produced here exhibit remarkably high thermal conductivities (50-80 mW/(m K)) at the same densities as other inorganic and polymer aerogels. These high thermal conductivities are attributed to efficient phonon transport by the rigid-rod polymer backbone. In conjunction with their low cost, ease of fabrication with respect to other polymer aerogels, low densities, and high mass-normalized strength and stiffness properties, these aerogels are uniquely valuable for applications such as lightweighting in consumer electronics, automobiles, and aerospace where weight reduction is

  2. Thermal Properties Measurement Report

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, Jon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tonks, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gofryk, Krzysztof [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knight, Collin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Mitch [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  3. Thermal properties of nanofluids.

    Science.gov (United States)

    Philip, John; Shima, P D

    2012-11-15

    Colloidal suspensions of fine nanomaterials in the size range of 1-100 nm in carrier fluids are known as nanofluids. For the last one decade, nanofluids have been a topic of intense research due to their enhanced thermal properties and possible heat transfer applications. Miniaturization and increased operating speeds of gadgets warranted the need for new and innovative cooling concepts for better performance. The low thermal conductivity of conventional heat transfer fluid has been a serious impediment for improving the performance and compactness of engineering equipments. Initial studies on thermal conductivity of suspensions with micrometer-sized particles encountered problems of rapid settling of particles, clogging of flow channels and increased pressure drop in the fluid. These problems are resolved by using dispersions of fine nanometer-sized particles. Despite numerous experimental and theoretical studies, it is still unclear whether the thermal conductivity enhancement in nanofluids is anomalous or within the predictions of effective medium theory. Further, many reports on thermal conductivity of nanofluids are conflicting due to the complex issues associated with the surface chemistry of nanofluids. This review provides an overview of recent advances in the field of nanofluids, especially the important material properties that affect the thermal properties of nanofluids and novel approaches to achieve extremely high thermal conductivities. The background information is also provided for beginners to better understand the subject.

  4. Thermal Properties of oil sand

    Science.gov (United States)

    LEE, Y.; Lee, H.; Kwon, Y.; Kim, J.

    2013-12-01

    Thermal recovery methods such as Cyclic Steam Injection or Steam Assisted Gravity Drainage (SAGD) are the effective methods for producing heavy oil or bitumen. In any thermal recovery methods, thermal properties (e.g., thermal conductivity, thermal diffusivity, and volumetric heat capacity) are closely related to the formation and expansion of steam chamber within a reservoir, which is key factors to control efficiency of thermal recovery. However, thermal properties of heavy oil or bitumen have not been well-studied despite their importance in thermal recovery methods. We measured thermal conductivity, thermal diffusivity, and volumetric heat capacity of 43 oil sand samples from Athabasca, Canada, using a transient thermal property measurement instrument. Thermal conductivity of 43 oil sand samples varies from 0.74 W/mK to 1.57 W/mK with the mean thermal conductivity of 1.09 W/mK. The mean thermal diffusivity is 5.7×10-7 m2/s with the minimum value of 4.2×10-7 m2/s and the maximum value of 8.0×10-7 m2/s. Volumetric heat capacity varies from 1.5×106 J/m3K to 2.11×106 J/m3K with the mean volumetric heat capacity of 1.91×106 J/m3K. In addition, physical and chemical properties (e.g., bitumen content, electric resistivity, porosity, gamma ray and so on) of oil sand samples have been measured by geophysical logging and in the laboratory. We are now proceeding to investigate the relationship between thermal properties and physical/chemical properties of oil sand.

  5. Superior Gas Sensing Properties of Monolayer PtSe2

    KAUST Repository

    Sajjad, Muhammad

    2016-12-15

    First-principles calculations of the structural and electronic properties of monolayer 1T-PtSe2 with adsorbed (a) NO2, (b) NO, (c) NH3, (d) H2O, (e) CO2, and (f) CO molecules are discussed. The results point to great potential of the material in gas sensor applications. Superior sensitivity is demonstrated by transport calculations using the nonequilibrium Green\\'s function method.

  6. REACTOR GROUT THERMAL PROPERTIES

    Energy Technology Data Exchange (ETDEWEB)

    Steimke, J.; Qureshi, Z.; Restivo, M.; Guerrero, H.

    2011-01-28

    Savannah River Site has five dormant nuclear production reactors. Long term disposition will require filling some reactor buildings with grout up to ground level. Portland cement based grout will be used to fill the buildings with the exception of some reactor tanks. Some reactor tanks contain significant quantities of aluminum which could react with Portland cement based grout to form hydrogen. Hydrogen production is a safety concern and gas generation could also compromise the structural integrity of the grout pour. Therefore, it was necessary to develop a non-Portland cement grout to fill reactors that contain significant quantities of aluminum. Grouts generate heat when they set, so the potential exists for large temperature increases in a large pour, which could compromise the integrity of the pour. The primary purpose of the testing reported here was to measure heat of hydration, specific heat, thermal conductivity and density of various reactor grouts under consideration so that these properties could be used to model transient heat transfer for different pouring strategies. A secondary purpose was to make qualitative judgments of grout pourability and hardened strength. Some reactor grout formulations were unacceptable because they generated too much heat, or started setting too fast, or required too long to harden or were too weak. The formulation called 102H had the best combination of characteristics. It is a Calcium Alumino-Sulfate grout that contains Ciment Fondu (calcium aluminate cement), Plaster of Paris (calcium sulfate hemihydrate), sand, Class F fly ash, boric acid and small quantities of additives. This composition afforded about ten hours of working time. Heat release began at 12 hours and was complete by 24 hours. The adiabatic temperature rise was 54 C which was within specification. The final product was hard and displayed no visible segregation. The density and maximum particle size were within specification.

  7. Vesta surface thermal properties map

    Science.gov (United States)

    Capria, Maria Teresa; Tosi, F.; De Santis, Maria Cristina; Capaccioni, F.; Ammannito, E.; Frigeri, A.; Zambon, F; Fonte, S.; Palomba, E.; Turrini, D.; Titus, T.N.; Schroder, S.E.; Toplis, M.J.; Liu, J.Y.; Combe, J.-P.; Raymond, C.A.; Russell, C.T.

    2014-01-01

    The first ever regional thermal properties map of Vesta has been derived from the temperatures retrieved by infrared data by the mission Dawn. The low average value of thermal inertia, 30 ± 10 J m−2 s−0.5 K−1, indicates a surface covered by a fine regolith. A range of thermal inertia values suggesting terrains with different physical properties has been determined. The lower thermal inertia of the regions north of the equator suggests that they are covered by an older, more processed surface. A few specific areas have higher than average thermal inertia values, indicative of a more compact material. The highest thermal inertia value has been determined on the Marcia crater, known for its pitted terrain and the presence of hydroxyl in the ejecta. Our results suggest that this type of terrain can be the result of soil compaction following the degassing of a local subsurface reservoir of volatiles.

  8. Lignin-based carbon fibers: Carbon nanotube decoration and superior thermal stability

    KAUST Repository

    Xu, Xuezhu

    2014-08-23

    Lignin-based carbon fibers (CFs) decorated with carbon nanotubes (CNTs) were synthesized and their structure, thermal stability and wettability were systematically studied. The carbon fiber precursors were produced by electrospinning lignin/polyacrylonitrile solutions. CFs were obtained by pyrolyzing the precursors and CNTs were subsequently grown on the CFs to eventually achieve a CF–CNT hybrid structure. The processes of pyrolysis and CNT growth were conducted in a tube furnace using different conditions and the properties of the resultant products were studied and compared. The CF–CNT hybrid structure produced at 850 °C using a palladium catalyst showed the highest thermal stability, i.e., 98.3% residual weight at 950 °C. A mechanism for such superior thermal stability was postulated based on the results from X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopy, and electron energy loss spectroscopy analyses. The dense CNT decoration was found to increase the hydrophobicity of the CFs.

  9. Superior Thermal Barrier Coatings Using Solution Precursor Plasma Spray

    Science.gov (United States)

    Jordan, E. H.; Xie, L.; Gell, M.; Padture, N. P.; Cetegen, B.; Ozturk, A.; Ma, X.; Roth, J.; Xiao, T. D.; Bryant, P. E. C.

    2004-03-01

    A novel process, solution precursor plasma spray (SPPS), is presented for depositing thermal barrier coatings (TBCs), in which aqueous chemical precursors are injected into a standard direct current plasma spray system. The resulting coatings microstructure has three unique features: (1) ultra fine splats (1 µm), (2) nanometer and micron-sized interconnected porosity, and (3) closely spaced, through-thickness cracks. Coatings over 3 mm thick can be readily deposited using the SPPS process. Coating durability is excellent, with SPPS coatings showing, in furnace cycling tests, 2.5 times the spallation life of air plasma coatings (APS) and 1.5 times the life of electron beam physical vapor deposited (EB-PVD) coatings. The conductivity of SPPS coatings is lower than EB-PVD coatings and higher than the best APS coatings. Manufacturing cost is expected to be similar to APS coatings and much lower than EB-PVD coatings. The SPPS deposition process includes droplet break-up and material arriving at the deposition surface in various physical states ranging from aqueous solution, gel phase, to fully-molten ceramic. The relation between the arrival state of the material and the microstructure is described.

  10. Designing functionally graded materials with superior load-bearing properties.

    Science.gov (United States)

    Zhang, Yu; Sun, Ming-Jie; Zhang, Denzil

    2012-03-01

    Ceramic prostheses often fail from fracture and wear. We hypothesize that these failures may be substantially mitigated by an appropriate grading of elastic modulus at the ceramic surface. In this study, we elucidate the effect of elastic modulus profile on the flexural damage resistance of functionally graded materials (FGMs), providing theoretical guidelines for designing FGMs with superior load-bearing property. The Young's modulus of the graded structure is assumed to vary in a power-law relation with a scaling exponent n; this is in accordance with experimental observations from our laboratory and elsewhere. Based on the theory for bending of graded beams, we examine the effect of n value and bulk-to-surface modulus ratio (E(b)/E(s)) on stress distribution through the graded layer. Theory predicts that a low exponent (0.15graded materials with various n values and E(b)/E(s) ratios can be fabricated by infiltrating alumina and zirconia with a low-modulus glass. Flexural tests show that graded alumina and zirconia with suitable values of these parameters exhibit superior load-bearing capacity, 20-50% higher than their homogeneous counterparts. Improving load-bearing capacity of ceramic materials could have broad impacts on biomedical, civil, structural, and an array of other engineering applications.

  11. Autologous chondrocyte implantation: superior biologic properties of hyaline cartilage repairs.

    Science.gov (United States)

    Henderson, Ian; Lavigne, Patrick; Valenzuela, Herminio; Oakes, Barry

    2007-02-01

    Information regarding the quality of autologous chondrocyte implantation repair is needed to determine whether the current autologous chondrocyte implantation surgical technology and the subsequent biologic repair processes are capable of reliably forming durable hyaline or hyaline-like cartilage in vivo. We report and analyze the properties and qualities of autologous chondrocyte implantation repairs. We evaluated 66 autologous chondrocyte implantation repairs in 57 patients, 55 of whom had histology, indentometry, and International Cartilage Repair Society repair scoring at reoperation for mechanical symptoms or pain. International Knee Documentation Committee scores were used to address clinical outcome. Maximum stiffness, normalized stiffness, and International Cartilage Repair Society repair scoring were higher for hyaline articular cartilage repairs compared with fibrocartilage, with no difference in clinical outcome. Reoperations revealed 32 macroscopically abnormal repairs (Group B) and 23 knees with normal-looking repairs in which symptoms leading to arthroscopy were accounted for by other joint disorders (Group A). In Group A, 65% of repairs were either hyaline or hyaline-like cartilage compared with 28% in Group B. Autologous chondrocyte repairs composed of fibrocartilage showed more morphologic abnormalities and became symptomatic earlier than hyaline or hyaline-like cartilage repairs. The hyaline articular cartilage repairs had biomechanical properties comparable to surrounding cartilage and superior to those associated with fibrocartilage repairs.

  12. Thermal insulation properties of walls

    Directory of Open Access Journals (Sweden)

    Zhukov Aleksey Dmitrievich

    2014-05-01

    Full Text Available Heat-protective qualities of building structures are determined by the qualities of the used materials, adequate design solutions and construction and installation work of high quality. This rule refers both to the structures made of materials similar in their structure and nature and mixed, combined by a construction system. The necessity to ecaluate thermal conductivity is important for a product and for a construction. Methods for evaluating the thermal protection of walls are based on the methods of calculation, on full-scale tests in a laboratory or on objects. At the same time there is a reason to believe that even deep and detailed calculation may cause deviation of the values from real data. Using finite difference method can improve accuracy of the results, but it doesn’t solve all problems. The article discusses new approaches to evaluating thermal insulation properties of walls. The authors propose technique of accurate measurement of thermal insulation properties in single blocks and fragments of walls and structures.

  13. Oriented clay nanopaper from biobased components--mechanisms for superior fire protection properties.

    Science.gov (United States)

    Carosio, F; Kochumalayil, J; Cuttica, F; Camino, G; Berglund, L

    2015-03-18

    The toxicity of the most efficient fire retardant additives is a major problem for polymeric materials. Cellulose nanofiber (CNF)/clay nanocomposites, with unique brick-and-mortar structure and prepared by simple filtration, are characterized from the morphological point of view by scanning electron microscopy and X-ray diffraction. These nanocomposites have superior fire protection properties to other clay nanocomposites and fiber composites. The corresponding mechanisms are evaluated in terms of flammability (reaction to a flame) and cone calorimetry (exposure to heat flux). These two tests provide a wide spectrum characterization of fire protection properties in CNF/montmorrilonite (MTM) materials. The morphology of the collected residues after flammability testing is investigated. In addition, thermal and thermo-oxidative stability are evaluated by thermogravimetric analyses performed in inert (nitrogen) and oxidative (air) atmospheres. Physical and chemical mechanisms are identified and related to the unique nanostructure and its low thermal conductivity, high gas barrier properties and CNF/MTM interactions for char formation.

  14. Thermal Properties of Bazhen fm. Sediments from Thermal Core Logging

    Science.gov (United States)

    Spasennykh, Mikhail; Popov, Evgeny; Popov, Yury; Chekhonin, Evgeny; Romushkevich, Raisa; Zagranovskaya, Dzhuliya; Belenkaya, Irina; Zhukov, Vladislav; Karpov, Igor; Saveliev, Egor; Gabova, Anastasia

    2016-04-01

    The Bazhen formation (B. fm.) is the hugest self-contained source-and-reservoir continuous petroleum system covering by more than 1 mln. km2 (West Siberia, Russia). High lithological differentiation in Bazhen deposits dominated by silicic shales and carbonates accompanied by extremely high total organic carbon values (of up to 35%), pyrite content and brittle mineralogical composition deteriorate standard thermal properties assessment for low permeable rocks. Reliable information of unconventional system thermal characteristics is the necessary part of works such as modelling of different processes in reservoir under thermal EOR for accessing their efficiency, developing and optimizing design of the oil recovery methods, interpretation of the well temperature logging data and for the basin petroleum modelling. A unique set of data including thermal conductivity, thermal diffusivity, volumetric heat capacity, thermal anisotropy for the B.fm. rocks was obtained from thermal core logging (high resolution continuous thermal profiling) on more than 4680 core samples (2000 of B.fm. samples are among) along seven wells for four oil fields. Some systematic peculiarities of the relation between thermal properties of the B.fm. rocks and their mineralogical composition, structural and texture properties were obtained. The high-resolution data are processed jointly with the standard petrophysical logging that allowed us to provide better separation of the formation. The research work was done with financial support of the Russian Ministry of Education and Science (unique identification number RFMEFI58114X0008).

  15. Laboratory measurements of rock thermal properties

    DEFF Research Database (Denmark)

    Bording, Thue Sylvester; Balling, N.; Nielsen, S.B.

    The thermal properties of rocks are key elements in understanding and modelling the temperature field of the subsurface. Thermal conductivity and thermal diffusivity can be measured in the laboratory if rock samples can be provided. We have introduced improvements to the divided bar and needle...... probe methods to be able to measure both thermal conductivity and thermal diffusivity. The improvements we implement include, for both methods, a combination of fast numerical finite element forward modelling and a Markov Chain Monte Carlo inversion scheme for estimating rock thermal parameters...

  16. Laboratory measurements of rock thermal properties

    DEFF Research Database (Denmark)

    Bording, Thue Sylvester; Balling, N.; Nielsen, S.B.

    The thermal properties of rocks are key elements in understanding and modelling the temperature field of the subsurface. Thermal conductivity and thermal diffusivity can be measured in the laboratory if rock samples can be provided. We have introduced improvements to the divided bar and needle...... probe methods to be able to measure both thermal conductivity and thermal diffusivity. The improvements we implement include, for both methods, a combination of fast numerical finite element forward modelling and a Markov Chain Monte Carlo inversion scheme for estimating rock thermal parameters...

  17. Processing, characterization, and properties of some novel thermal barrier coatings

    Science.gov (United States)

    Jadhav, Amol D.

    The efficacy of ceramic thermal barrier coatings (TBCs) used to protect and to insulate metal components in engines increases with the thickness of the TBCs. However, the durabilities of thick TBCs deposited using conventional ceramic-coating deposition methods have not been adequate. Here the feasibility of depositing highly durable thick TBCs (1.5 to 4 mm thickness) of ZrO 2-7 wt.% Y2O3 (7YSZ) on bond-coated superalloy substrates using the solution-precursor plasma spray (SPPS) method has been demonstrated. Thermal cyclic durabilities of the thick SPPS TBCs have been shown to be much superior compared to TBCs deposited using the conventional air-plasma-spray (APS) process. To evaluate the performance of thick APS and SPPS TBCs, mechanical properties of free-standing coatings and coating/substrate interfaces have been determined experimentally. Additional evaluation of TBC performance has been obtained from studies of damage and development of thermally grown oxide (TGO) at the interface as a result of thermal cycling. The later results are used to suggest mechanisms of chemical failure of TGO in thick plasma-sprayed TBCs. Based on the experimental results and numerical analysis of the TBC residual stresses, the dramatic improvement in the thermal cycling life in the SPPS TBCs is attributed to superior mechanical properties of SPPS coatings. The presence of the strain tolerant vertical cracks in SPPS TBCs reduces the driving force for TBC spallation under mode-II loading. Additionally, high in-plane fracture toughness in the SPPS TBCs under mode-I loading delays the TBC spallation significantly. Finally, thermal conductivity of the SPPS TBCs has been reduced by microstructural tailoring. Analytical and object-oriented finite element (OOF) models have been used to analyze the experimental thermal conductivity data, and to predict thermal conductivities of engineered TBCs.

  18. Silicone elastomers with superior softness and dielectric properties

    DEFF Research Database (Denmark)

    Yu, Liyun; Madsen, Frederikke Bahrt; Zakaria, Shamsul Bin;

    of electrical breakdown and achievable strain.[2]In this work, three liquid additives - inert silicone oil, chloropropyl-functional silicone oil, and synthesized chloropropyl-functional copolymer - were blended into commercial silicone elastomers, and their properties were investigated.The functional groups......Dielectric elastomers (DEs) change their shape and size under a high voltage or reversibly generate a high voltage when deformed. The obstacle of high driving voltages, however, limits the commercial viability of the technology at present. Driving voltage can be lowered by decreasing the Young......’s modulus and increasing the dielectric permittivity of silicone elastomers. One such prominent method of modifying the properties is by adding suitable additives.[1] The major drawbacks for adding solid fillers are agglomeration and increasing stiffness which is often accompanied by the decrease...

  19. Silicone elastomers with superior softness and dielectric properties

    DEFF Research Database (Denmark)

    Yu, Liyun; Madsen, Frederikke Bahrt; Zakaria, Shamsul Bin;

    of electrical breakdown and achievable strain.[2] In this work, three liquid additives - inert silicone oil, chloropropyl-functional silicone oil, and synthesized chloropropyl-functional copolymer - were blended into commercial silicone elastomers, and their properties were investigated.The functional groups......Dielectric elastomers (DEs) change their shape and size under a high voltage or reversibly generate a high voltage when deformed. The obstacle of high driving voltages, however, limits the commercial viability of the technology at present. Driving voltage can be lowered by decreasing the Young......’s modulus and increasing the dielectric permittivity of silicone elastomers. One such prominent method of modifying the properties is by adding suitable additives. [1] The major drawbacks for adding solid fillers are agglomeration and increasing stiffness which is often accompanied by the decrease...

  20. THERMAL PROPERTIES OF REFRACTORY MATERIALS

    Science.gov (United States)

    1650 C. Data over this temperature range are presented on tantalum, titanium carbide , and zirconium carbide. The steady-state thermal conductivity...C. The thermal conductivity behavior of zirconium carbide is similar to that previously observed for titanium carbide . The data for titanium nitride

  1. Thermal Properties, Thermal Shock, and Thermal Cycling Behavior of Lanthanum Zirconate-Based Thermal Barrier Coatings

    Science.gov (United States)

    Guo, Xingye; Lu, Zhe; Jung, Yeon-Gil; Li, Li; Knapp, James; Zhang, Jing

    2016-06-01

    Lanthanum zirconate (La2Zr2O7) coatings are newly proposed thermal barrier coating (TBC) systems which exhibit lower thermal conductivity and potentially higher thermal stability compared to other traditional thermal barrier systems. In this work, La2Zr2O7 and 8 wt pct yttria stabilized zirconia (8YSZ) single-layer and double-layer TBC systems were deposited using the air plasma spray technique. Thermal properties of the coatings were measured. Furnace heat treatment and jet engine thermal shock tests were implemented to evaluate coating performance during thermal cycling. The measured average thermal conductivity of porous La2Zr2O7 coating ranged from 0.59 to 0.68 W/m/K in the temperature range of 297 K to 1172 K (24 °C to 899 °C), which was approximately 25 pct lower than that of porous 8YSZ (0.84 to 0.87 W/m/K) in the same temperature range. The coefficients of thermal expansion values of La2Zr2O7 were approximately 9 to 10 × 10-6/K from 400 K to 1600 K (127 °C to 1327 °C), which were about 10 pct lower than those of porous 8YSZ. The double-layer coating system consisting of the porous 8YSZ and La2Zr2O7 layers had better thermal shock resistance and thermal cycling performance than those of single-layer La2Zr2O7 coating and double-layer coating with dense 8YSZ and La2Zr2O7 coatings. This study suggests that porous 8YSZ coating can be employed as a buffer layer in La2Zr2O7-based TBC systems to improve the overall coating durability during service.

  2. Thermal properties of alkali-activated aluminosilicates

    Science.gov (United States)

    Florian, Pavel; Valentova, Katerina; Fiala, Lukas; Zmeskal, Oldrich

    2017-07-01

    The paper is focused on measurements and evaluation of thermal properties of alkali-activated aluminosilicates (AAA) with various carbon admixtures. Such composites consisting of blast-furnace slag, quartz sand, water glass as alkali activator and small amount of electrically conductive carbon admixture exhibit better electric and thermal properties than the reference material. Such enhancement opens up new practical applications, such as designing of snow-melting, de-icing or self-sensing systems that do not need any external sensors to detect current condition of building material. Thermal properties of the studied materials were measured by the step-wise transient method and mutually compared.

  3. Climate change expands the spatial extent and duration of preferred thermal habitat for lake Superior fishes.

    Directory of Open Access Journals (Sweden)

    Timothy J Cline

    Full Text Available Climate change is expected to alter species distributions and habitat suitability across the globe. Understanding these shifting distributions is critical for adaptive resource management. The role of temperature in fish habitat and energetics is well established and can be used to evaluate climate change effects on habitat distributions and food web interactions. Lake Superior water temperatures are rising rapidly in response to climate change and this is likely influencing species distributions and interactions. We use a three-dimensional hydrodynamic model that captures temperature changes in Lake Superior over the last 3 decades to investigate shifts in habitat size and duration of preferred temperatures for four different fishes. We evaluated habitat changes in two native lake trout (Salvelinus namaycush ecotypes, siscowet and lean lake trout, Chinook salmon (Oncorhynchus tshawytscha, and walleye (Sander vitreus. Between 1979 and 2006, days with available preferred thermal habitat increased at a mean rate of 6, 7, and 5 days per decade for lean lake trout, Chinook salmon, and walleye, respectively. Siscowet lake trout lost 3 days per decade. Consequently, preferred habitat spatial extents increased at a rate of 579, 495 and 419 km(2 per year for the lean lake trout, Chinook salmon, and walleye while siscowet lost 161 km(2 per year during the modeled period. Habitat increases could lead to increased growth and production for three of the four fishes. Consequently, greater habitat overlap may intensify interguild competition and food web interactions. Loss of cold-water habitat for siscowet, having the coldest thermal preference, could forecast potential changes from continued warming. Additionally, continued warming may render more suitable conditions for some invasive species.

  4. Thermal properties of different rank coals

    Energy Technology Data Exchange (ETDEWEB)

    Serdar Yaman; Hanzade Haykiri-Acma [Istanbul Technical University, Istanbul (Turkey). Dept. of Chemical Engineering

    2007-07-01

    Thermal properties of various coal samples which have different rank and petrography were investigated under both inert and oxidizing conditions up to 900{sup o}C in a thermal analysis system. Peat, anthracite, and bituminous coal samples from different countries and various lignites from Turkey such as Askale, Soma, and Elbistan were used. DTA (Differential Thermal Analysis) and TGA (Thermogravimetric Analysis) techniques were applied. DTG (Derivative Thermogravimetric) curves were derived and interpreted considering the physical and chemical properties, and the rank of coals. Pyrolytic chars obtained from the inert atmosphere experiments were examined applying SEM (Scanning Electron Microscopy) and XRD (X-ray Diffractometry) techniques. It was found that the thermal reactivity and the apparent thermal properties of different rank coals differ considerably under both conditions. 6 refs., 4 figs., 3 tabs.

  5. Thermal to electricity conversion using thermal magnetic properties

    Science.gov (United States)

    West, Phillip B [Idaho Falls, ID; Svoboda, John [Idaho Falls, ID

    2010-04-27

    A system for the generation of Electricity from Thermal Energy using the thermal magnetic properties of a Ferromagnetic, Electrically Conductive Material (FECM) in one or more Magnetic Fields. A FECM is exposed to one or more Magnetic Fields. Thermal Energy is applied to a portion of the FECM heating the FECM above its Curie Point. The FECM, now partially paramagnetic, moves under the force of the one or more Magnetic Fields. The movement of the FECM induces an electrical current through the FECM, generating Electricity.

  6. Solid solution barium–strontium chlorides with tunable ammonia desorption properties and superior storage capacity

    Energy Technology Data Exchange (ETDEWEB)

    Bialy, Agata [Amminex Emissions Technology A/S, Gladsaxevej 363, 2860 Soeborg (Denmark); Jensen, Peter B. [Department of Energy Conversion and Storage, Technical University of Denmark, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Center for Atomic-scale Materials Design, Department of Physics, Technical University of Denmark, Fysikvej 311, DK-2800 Kgs. Lyngby (Denmark); Blanchard, Didier [Department of Energy Conversion and Storage, Technical University of Denmark, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Vegge, Tejs, E-mail: teve@dtu.dk [Department of Energy Conversion and Storage, Technical University of Denmark, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Quaade, Ulrich J., E-mail: ujq@amminex.com [Amminex Emissions Technology A/S, Gladsaxevej 363, 2860 Soeborg (Denmark)

    2015-01-15

    Metal halide ammines are very attractive materials for ammonia absorption and storage—applications where the practically accessible or usable gravimetric and volumetric storage densities are of critical importance. Here we present, that by combining advanced computational materials prediction with spray drying and in situ thermogravimetric and structural characterization, we synthesize a range of new, stable barium-strontium chloride solid solutions with superior ammonia storage densities. By tuning the barium/strontium ratio, different crystallographic phases and compositions can be obtained with different ammonia ab- and desorption properties. In particular it is shown, that in the molar range of 35–50% barium and 65–50% strontium, stable materials can be produced with a practically usable ammonia density (both volumetric and gravimetric) that is higher than any of the pure metal halides, and with a practically accessible volumetric ammonia densities in excess of 99% of liquid ammonia. - Graphical abstract: Thermal desorption curves of ammonia from Ba{sub x}Sr{sub (1−x)}Cl{sub 2} mixtures with x equal to 0.125, 0.25 and 0.5 and atomic structure of Sr(NH{sub 3}){sub 8}Cl{sub 2}. - Highlights: • Solid solutions of strontium and barium chloride were synthesized by spray drying. • Adjusting molar ratios led to different crystallographic phases and compositions. • Different molar ratios led to different ammonia ab-/desorption properties. • 35–50 mol% BaCl{sub 2} in SrCl{sub 2} yields higher ammonia density than any other metal halide. • DFT calculations can be used to predict properties of the mixtures.

  7. Thermal properties of simulated Hanford waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Carmen P. [Pacific Northwest National Laboratory, Richland Washington USA; Chun, Jaehun [Pacific Northwest National Laboratory, Richland Washington USA; Crum, Jarrod V. [Pacific Northwest National Laboratory, Richland Washington USA; Canfield, Nathan L. [Pacific Northwest National Laboratory, Richland Washington USA; Rönnebro, Ewa C. E. [Pacific Northwest National Laboratory, Richland Washington USA; Vienna, John D. [Pacific Northwest National Laboratory, Richland Washington USA; Kruger, Albert A. [U.S. Department of Energy, Office of River Protection, Richland Washington

    2017-03-20

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will vitrify the mixed hazardous wastes generated from 45 years of plutonium production. The molten glasses will be poured into stainless steel containers or canisters and subsequently quenched for storage and disposal. Such highly energy-consuming processes require precise thermal properties of materials for appropriate facility design and operations. Key thermal properties (heat capacity, thermal diffusivity, and thermal conductivity) of representative high-level and low-activity waste glasses were studied as functions of temperature in the range of 200 to 800°C (relevant to the cooling process), implementing simultaneous differential scanning calorimetry-thermal gravimetry (DSC-TGA), Xe-flash diffusivity, pycnometry, and dilatometry. The study showed that simultaneous DSC-TGA would be a reliable method to obtain heat capacity of various glasses at the temperature of interest. Accurate thermal properties from this study were shown to provide a more realistic guideline for capacity and time constraint of heat removal process, in comparison to the design basis conservative engineering estimates. The estimates, though useful for design in the absence measured physical properties, can now be supplanted and the measured thermal properties can be used in design verification activities.

  8. Green chitosan-carbon dots nanocomposite hydrogel film with superior properties.

    Science.gov (United States)

    Konwar, Achyut; Gogoi, Neelam; Majumdar, Gitanjali; Chowdhury, Devasish

    2015-01-22

    In this work we report novel chitosan-carbon dots nanocomposite hydrogel films. A new green source "tea" was used as precursor for carbon dots (CDs). The electrostatic interaction of positive charge on chitosan and negative charge on CDs prepared from tea was used for the successful preparation of a stable and robust chitosan-carbon dots nanocomposite hydrogel film. The hydrogel films were characterized by UV-visible spectroscopy, X-ray diffraction (XRD), Fourier transformed infra-red spectroscopy (FTIR), scanning electron microscope (SEM), fluorescent microscopy, thermogravimetric analysis (TGA) and contact angle analysis. It was observed that chitosan-carbon dots hydrogel films are soft but tough with superior UV-visible blocking, swelling, thermal and mechanical properties in comparison to chitosan hydrogel film. Moreover chitosan-carbon dots films are more water repellent (hydrophobic) as indicated by their high contact angle values. Thus, fabrication of such green soft but tough biocompatible chitosan-carbon dots nanocomposite hydrogel films offers tremendous bio-medical and industrial applications.

  9. Lipophilic phytosterol derivatives: synthesis, thermal property and nanoemulsion behavior

    DEFF Research Database (Denmark)

    Panpipat, Worawan; Xu, Xuebing; Guo, Zheng

    the productive yield of a series of -sitosteryl fatty acid esters (C2-C18) and to investigate the thermal property and nano-emulsion behaviors of those compounds. This work reported a novel approach to synthesize phytosterol (-sitosterol as a model) fatty acid ester by employing Candida antarctica lipase...... A (CAL A) which showed a superior catalytic activity towards secondary alcohol to another lipases. Series of -sitosteryl fatty acid esters (C2-C18) were successfully prepared and their molecular structures were identified by 1HNMR and Fourier transform-infrared spectroscopy (FTIR). The thermal property...... of -sitosterol fatty acid esters was governed by the carbon chain length of fatty acid incorporated. The nano-emulsions of a series of -sitosteryl fatty acid esters were prepared by probe-sonication method. The particle size distributions, zeta potentials and TEM images of those emulsions were different...

  10. Measurement of thermal properties of PCM materials

    Energy Technology Data Exchange (ETDEWEB)

    Domanski, R.; Jaworski, M. [Warsaw Univ. of Technology (Poland). Inst. of Heat Engineering

    1994-12-31

    In the article results of measurements of thermal properties of PCM (phase change materials) and their stability are presented. These include specific heat, temperature of phase change, latent heat and enthalpy as a function of temperature. Different kind of materials were considered, especially some waxes, n-alkanes and salt hydrates. Measurements of thermal capacity of materials were performed using two techniques - standard DSC (for small samples and pure materials) and simple thermal analysis based on the measurement of temperature field in relatively big samples (about 20-50 g). Stability of thermal properties in many cycles of melting and solidification for some materials obtained in special set-up (for fast cycling) are presented. On the base of measurements mathematical formulas describing enthalpy vs. temperature for some materials were developed. These are very useful in computer simulation of thermal storage systems with PCM. (orig.)

  11. Thermal properties of selected cheeses samples

    Directory of Open Access Journals (Sweden)

    Monika BOŽIKOVÁ

    2016-02-01

    Full Text Available The thermophysical parameters of selected cheeses (processed cheese and half hard cheese are presented in the article. Cheese is a generic term for a diverse group of milk-based food products. Cheese is produced throughout the world in wide-ranging flavors, textures, and forms. Cheese goes during processing through the thermal and mechanical manipulation, so thermal properties are one of the most important. Knowledge about thermal parameters of cheeses could be used in the process of quality evaluation. Based on the presented facts thermal properties of selected cheeses which are produced by Slovak producers were measured. Theoretical part of article contains description of cheese and description of plane source method which was used for thermal parameters detection. Thermophysical parameters as thermal conductivity, thermal diffusivity and volume specific heat were measured during the temperature stabilisation. The results are presented as relations of thermophysical parameters to the temperature in temperature range from 13.5°C to 24°C. Every point of graphic relation was obtained as arithmetic average from measured values for the same temperature. Obtained results were statistically processed. Presented graphical relations were chosen according to the results of statistical evaluation and also according to the coefficients of determination for every relation. The results of thermal parameters are in good agreement with values measured by other authors for similar types of cheeses.

  12. The properties of the extraocular muscles of the frog. I. Mechanical properties of the isolated superior oblique and superior rectus muscles.

    Science.gov (United States)

    Asmussen, G

    1978-01-01

    The mechanical properties of two extraocular muscles (superior oblique and superior rectus muscles) of the frog were studied and compared with those of a frog's skeletal muscle (iliofibularis muscle) which contains the same types of muscle fibres as the oculorotatory muscles. The extraocular muscles are very fast twitching muscles. They exhibit a smaller contraction time, a smaller half-relaxation time, a higher fusion frequency, and a lower twitch-tetanus ratio than the skeletal muscles. The maximum isometric tetanic tension produced per unit cross-sectional area is lower in the extraocular muscles than in skeletal muscles. However, the extraocular muscles show a higher fatigue resistance than the skeletal muscles. With respect to the dynamic properties there are some differences between the various oculorotatory muscles of the frog. The superior rectus muscle exhibits a faster time-course of the contraction, a higher fusion frequency, and a higher fatigability than the superior oblique muscle. An increase of the extracellular K+-concentration evokes sustained contractures not only in the extraocular muscles but also in the iliofibularis muscle; between these muscles there are no striking differences in the mechanical threshold of the whole muscle preparation. The mechanical threshold depends on the Ca++-concentration of the bathing solution and it is found in a range between 12.5 and 17.5 mM K+ in a normal Ringer solution containing 1.8 mM Ca++. The static-mechanical properties of the extraocular muscles of the frog and the dependence of the active developed tension on the muscle extension are very similar to those which are known to exist in the extraocular muscles of other vertebrates. In tetanic activated frog's oculorotatory muscles a linear relationship exists between length and tension. A variation of the stimulation frequency does not change the slope of this curve but causes parallel shifts of the curve. The peculiar properties of the extraocular muscles

  13. Thermal properties of three Fermi pulsars

    Science.gov (United States)

    Danilenko, A.; Karpova, A.; Kirichenko, A.; Shibanov, Y.; Shternin, P.; Zharikov, S.; Zyuzin, D.

    2014-07-01

    We analysed thermal properties of the Fermi pulsars J0357+3205, J1741-2054, and J0633+0632 using data from the XMM-Newton and Chandra archives. The X-ray spectra of all three pulsars can be fitted by sum of thermal and power-law components. For J1741-2054, the thermal component is best described by a blackbody model whose normalization suggests that the thermal emission comes from the bulk of the neutron star surface. The effective temperature of 60 eV, which is rather large for a pulsar as old as J1741-2054, makes it similar to the well-studied pulsar B1055-52, one of ``the three musketeers''. The thermal components of PSRs J0357+3205 and J0633+0632 can be equally well described by blackbody or the hydrogen atmosphere models. In the former case the normalizations suggest hot polar cap as thermal emission origin and only upper limits on the neutron stars surface temperatures can be computed. For the hydrogen atmosphere models, the normalizations are in agreement with emission coming from a substantial part of neutron star surface. Thermal properties of the pulsars are confronted with similar data on other isolated neutron stars and predictions of the neutron star cooling theory.

  14. A polythiophene derivative with superior properties for practical application in polymer solar cells.

    Science.gov (United States)

    Zhang, Maojie; Guo, Xia; Ma, Wei; Ade, Harald; Hou, Jianhui

    2014-09-03

    A polythiophene derivative called PDCBT, which has a backbone of thiophene units and just carboxylate functional groups to modulate its properties, exhibits properties superior to those of poly(3-hexylthiophene), the classic polythiophene derivative, when used as an electron donor in polymer solar cells (PSCs). The best device, based on PDCBT/PC71BM (1:1), develops a good power conversion efficiency of 7.2%.

  15. Thermal Properties of Aliphatic Polypeptoids

    Directory of Open Access Journals (Sweden)

    Corinna Fetsch

    2013-01-01

    Full Text Available A series of polypeptoid homopolymers bearing short (C1–C5 side chains of degrees of polymerization of 10–100 are studied with respect to thermal stability, glass transition and melting points. Thermogravimetric analysis of polypeptoids suggests stability to >200 °C. The study of the glass transition temperatures by differential scanning calorimetry revealed two dependencies. On the one hand an extension of the side chain by constant degree of polymerization decrease the glass transition temperatures (Tg and on the other hand a raise of the degree of polymerization by constant side chain length leads to an increase of the Tg to a constant value. Melting points were observed for polypeptoids with a side chain comprising not less than three methyl carbon atoms. X-ray diffraction of polysarcosine and poly(N-ethylglycine corroborates the observed lack of melting points and thus, their amorphous nature. Diffractograms of the other investigated polypeptoids imply that crystalline domains exist in the polymer powder.

  16. Thermal Properties of Aliphatic Polypeptoids

    KAUST Repository

    Fetsch, Corinna

    2013-01-29

    A series of polypeptoid homopolymers bearing short (C1-C5) side chains of degrees of polymerization of 10-100 are studied with respect to thermal stability, glass transition and melting points. Thermogravimetric analysis of polypeptoids suggests stability to >200 °C. The study of the glass transition temperatures by differential scanning calorimetry revealed two dependencies. On the one hand an extension of the side chain by constant degree of polymerization decrease the glass transition temperatures (Tg) and on the other hand a raise of the degree of polymerization by constant side chain length leads to an increase of the Tg to a constant value. Melting points were observed for polypeptoids with a side chain comprising not less than three methyl carbon atoms. X-ray diffraction of polysarcosine and poly(N-ethylglycine) corroborates the observed lack of melting points and thus, their amorphous nature. Diffractograms of the other investigated polypeptoids imply that crystalline domains exist in the polymer powder. © 2013 by the authors.

  17. The properties of the extraocular muscles of the frog. II. Pharmacological properties of the isolated superior oblique and superior rectus muscles.

    Science.gov (United States)

    Asmussen, G

    1978-01-01

    The pharmacological properties of the superior oblique and the superior rectus muscles of the frog's eye were investigated in comparison with those of a skeletal muscle (iliofibularis muscle) of the same animal. Acetylcholine causes sustained contractures of the extraocular muscles; this effect is increased by physostigmine and decreased or abolished by d-tubocurarine. Also the applications of succinylcholine, choline or caffeine are able to evoke contractures. There are no striking differences in pharmacological properties between extraocular and skeletal muscles of the frog. The time-course of the contractures and the sensitivity of the muscle preparations to the drugs which evoke contractures are identical in extraocular and iliofibularis muscles. In comparison with skeletal muscles there is no higher sensitivity of the extraocular muscles against curare-like drugs. The existence of adrenergic receptors could not be found neither in extraocular nor in skeletal muscles of the frog. It is concluded that in frogs no pharmacological differences exist between the muscle fibre types which compose the extraocular and the skeletal muscles.

  18. Lattice thermal conductivity evaluated using elastic properties

    Science.gov (United States)

    Jia, Tiantian; Chen, Gang; Zhang, Yongsheng

    2017-04-01

    Lattice thermal conductivity is one of the most important thermoelectric parameters in determining the energy conversion efficiency of thermoelectric materials. However, the lattice thermal conductivity evaluation requires time-consuming first-principles (quasi)phonon calculations, which limits seeking high-performance thermoelectric materials through high-throughput computations. Here, we establish a methodology to determine the Debye temperature Θ , Grüneisen parameter γ , and lattice thermal conductivity κ using computationally feasible elastic properties (the bulk and shear moduli). For 39 compounds with three different prototypes (the cubic isotropic rocksalt and zinc blende, and the noncubic anisotropic wurtzite), the theoretically calculated Θ ,γ , and κ are in reasonable agreement with those determined using (quasi)harmonic phonon calculations or experimental measurements. Our results show that the methodology is an efficient tool to predict the anharmonicity and the lattice thermal conductivity.

  19. Superior thermal conductivity of transparent polymer nanocomposites with a crystallized alumina membrane

    Directory of Open Access Journals (Sweden)

    Md. Poostforush

    2014-04-01

    Full Text Available The properties of novel thermoconductive and optically transparent nanocomposites have been reported. The composites were prepared by the impregnation of thermoset resin into crystallized anodic aluminum oxide (AAO. Crystallized AAO synthesized by annealing amorphous AAO membrane at 1200°C. Although through-plane thermal conductivity of nanocomposites improved up to 1.13 W•m–1•K–1 (39 vol% alumina but their transparency was preserved (Tλ550 nm ~ 72%. Integrated annealed alumina phase, low refractive index mismatch between resin and alumina and formation of nano-optical fibers through the membrane resulted in such marvel combination. This report shows a great potential of these types of nanocomposites in ‘heat management’ of lightening devices.

  20. Mapping Hawking into Unruh thermal properties

    OpenAIRE

    S. Deser; Levin, Orit

    1999-01-01

    By globally embedding curved spaces into higher dimensional flat ones, we show that Hawking thermal properties map into their Unruh equivalents: The relevant curved space detectors become Rindler ones, whose temperature and entropy reproduce the originals. Specific illustrations include Schwarzschild, Schwarzschild–(anti-)de Sitter, Reissner-Nordström, and Bañados-Teitelboim-Zanelli spaces.

  1. Changes of Blood Flow Volume in the Superior Mesenteric Artery and Brachial Artery with Abdominal Thermal Stimulation

    Directory of Open Access Journals (Sweden)

    Shin Takayama

    2011-01-01

    Full Text Available In traditional Chinese medicine, moxibustion is a local thermal therapy that is used for several conditions. Quantifying the effects of moxibustion therapy has been difficult because the treatment temperature depends on the physician's experience, and the temperature distribution in the target area is not uniform. This prospective observational study aims to quantify the effect of local thermal stimulation to the abdomen. We developed a heat transfer control device (HTCD for local thermal stimulation. Twenty-four healthy subjects were enrolled and they underwent abdominal thermal stimulation to the para-umbilical region with the device for 20 min. Blood flow volume in the superior mesenteric artery (SMA and brachial artery (BA, the heart rate and the blood pressure were measured at rest, 15 min after starting thermal stimulation and 10, 20, 30 and 40 min after completing thermal stimulation. Blood flow parameters were measured by high-resolution ultrasound. In the SMA, blood flow volume was significantly increased during thermal stimulation (, as well as at 10 min ( and 20 min ( after stimulation. In the BA, blood flow volume decreased at 40 min after stimulation (. In conclusion we could quantify the effect of local thermal stimulation with an HTCD and high-resolution ultrasound. Thermal stimulation of the para-umbilical region increased blood flow in the SMA 20 min after stimulation in healthy subjects.

  2. Novel thermal properties of nanostructured materials.

    Energy Technology Data Exchange (ETDEWEB)

    Eastman, J. A.

    1999-01-13

    A new class of heat transfer fluids, termed nanofluids, has been developed by suspending nanocrystalline particles in liquids. Due to the orders-of-magnitude larger thermal conductivities of solids compared to those of liquids such as water, significantly enhanced thermal properties are obtained with nanofluids. For example, an approximately 20% improvement in effective thermal conductivity is observed when 5 vol.% CuO nanoparticles are added to water. Even more importantly, the heat transfer coefficient of water under dynamic flow conditions is increased more than 15% with the addition of less than 1 vol.% CuO particles. The use of nanofluids could impact many industrial sectors, including transportation, energy supply and production, electronics, textiles, and paper production by, for example, decreasing pumping power needs or reducing heat exchanger sizes. In contrast to the enhancement in effective thermal transport rates that is obtained when nanoparticles are suspended in fluids, nanocrystalline coatings are expected to exhibit reduced thermal conductivities compared to coarse-grained coatings. Reduced thermal conductivities are predicted to arise because of a reduction in the mean free path of phonons due to presence of grain boundaries. This behavior, combined with improved mechanical properties, makes nanostructured zirconia coatings excellent candidates for future applications as thermal barriers. Yttria-stabilized zirconia (YSZ) thin films are being produced by metal-organic chemical vapor deposition techniques. Preliminary results have indicated that the thermal conductivity is reduced by approximately a factor-of-two at room temperature in 10 nm grain-sized YSZ compared to coarse-grained or single crystal YSZ.

  3. Thermal properties of food and pharmaceutical powders

    Science.gov (United States)

    Abiad, Mohamad Ghassan

    Foods and pharmaceuticals are complex systems usually exposed to various environmental conditions during processing and thus storage, stability, functionality and quality are key attributes that deserve careful attention. The quality and stability of foods and pharmaceuticals are mainly affected by environmental conditions such as temperature, humidity, time, and processing conditions (e.g. shear, pressure) under which they may undergo physical and/or chemical transformations. Glass transition as well as other thermal properties is a key to understand how external conditions affect physical changes of such materials. Development of new materials and understanding the physico-chemical behavior of existing ones require a scientific foundation that translates into safe and high quality foods, improved quality of pharmaceuticals and nutraceuticals with lower risk to patients and functional efficacy of polymers used in food and medicinal products. This research provides an overview of the glass transition and other thermal properties and introduces novel methods developed to characterize such properties.

  4. Unique properties of halide perovskites as possible origins of the superior solar cell performance.

    Science.gov (United States)

    Yin, Wan-Jian; Shi, Tingting; Yan, Yanfa

    2014-07-16

    Halide perovskites solar cells have the potential to exhibit higher energy conversion efficiencies with ultrathin films than conventional thin-film solar cells based on CdTe, CuInSe2 , and Cu2 ZnSnSe4 . The superior solar-cell performance of halide perovskites may originate from its high optical absorption, comparable electron and hole effective mass, and electrically clean defect properties, including point defects and grain boundaries.

  5. Thermophysical Properties of a Hot-Work Tool-Steel with High Thermal Conductivity

    Science.gov (United States)

    Kaschnitz, E.; Hofer, P.; Funk, W.

    2013-05-01

    In the highly productive permanent mold-casting process, the released enthalpy of the solidifying metal has to be transported through the surrounding hot-work tool-steel to the cooling system. For that reason, the thermal conductivity is a key property of the employed tool-steel. Recently, a new type of steel (Rovalma HTCS 130) has been developed and superior thermal properties have been claimed. In this study, measurements of the thermal diffusivity, heat capacity, and thermal expansion as a function of temperature are described for this steel and results of the computed thermal conductivity are reported. There is quite a discrepancy between the specification of the steel supplier and the results of this study; however, an improvement of the thermal conductivity for this type of steel can be confirmed.

  6. Simulation of thermo-Elastics Properties of Thermal Barrier Coatings ...

    African Journals Online (AJOL)

    Simulation of thermo-Elastics Properties of Thermal Barrier Coatings. ... entailing improved lifetime of the coating, but with a higher thermal conductivity. ... elasticity and its evolution with the temperature as well as thermal expansion, aiming at ...

  7. Thermal Radiative Properties of Xonotlite Insulation Material

    Institute of Scientific and Technical Information of China (English)

    Xinxin ZHANG; Gaosheng WEI; Fan YU

    2005-01-01

    This paper presents experimental results of thermal radiative properties of xonotlite-type calcium silicate insulation material. Transmittance spectra were first taken using Fourier transform infrared spectrometer (FTIR)for the samples with ρ = 234 kg/m3. Specific extinction coefficient spectra were then obtained by applying Beer's law.Finally,by using the diffusion approximation,the specific Rossland mean extinction coefficients and radiative thermal conductivities were obtained for various temperatures. The results show that the specific spectral extinction coefficient of xonotlite is larger than 7 m2/kg in the whole measured spectra, and diffusion approximation equation is a reasonable description of radiative heat transfer in xonotlite insulation material. The specific Rossland mean extinction coefficient of xonotlite has a maximum ualue at 400 K and the radiative thermal conductivity is almost proportional to the cube of temperature.

  8. EXPERIMENTAL MEASUREMENT OF NANOFLUIDS THERMAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Adnan M. Hussein

    2013-07-01

    Full Text Available Solid particles dispersed in a liquid with sizes no larger than 100nm, known as nanofluids, are used to enhance Thermophysical properties compared to the base fluid. Preparations of alumina (Al2O3, titania (TiO2 and silica (SiO2 in water have been experimentally conducted in volume concentrations ranging between 1 and 2.5%. Thermal conductivity is measured by the hot wire method and viscosity with viscometer equipment. The results of thermal conductivity and viscosity showed an enhancement (0.5–20% and 0.5–60% respectively compared with the base fluid. The data measured agreed with experimental data of other researchers with deviation of less than 5%. The study showed that alumina has the highest thermal conductivity, followed silica and titania, on the other hand silica has the highest viscosity followed alumina and titania.

  9. MORPHOLOGICAL AND THERMAL PROPERTIES OF MAIZE STARCH

    Directory of Open Access Journals (Sweden)

    Elena Corina Popescu

    2010-01-01

    Full Text Available Maize, rice, wheat and potato are the main sources of starches which differ significantly in composition, morphology,thermal, rheological and retrogradation properties. Starch has unique thermal properties and functionality that havepermitted its wide use in food products and industrial applications.The structure of the starch granule results from the physical arrangement of amylose and amylopectin. Amylose contentof starches from different maize types ranged between 15.3% and 25.1%. Amylopectin is considered responsible for thecrystalline structure of starch granules.The morphological and physicochemical characteristics of maize starch are related to the enzymes involved in itsbiosynthesis.The surface of the starch granule plays a fundamental rôle as the first barrier to processes such as granule hydration,enzyme attack, and chemical reaction with modifying agents. Major parameters describing the solid surface are:specific surface area, total pore volume, mean pore radius (diameter and pore volume distribution in relation to poreradius (diameter.

  10. Thermal-Insulation Properties of Multilayer Textile Packages

    OpenAIRE

    Matusiak Małgorzata; Kowalczyk Sylwia

    2014-01-01

    Thermal-insulation properties of textile materials play a significant role in material engineering of protective clothing. Thermal-insulation properties are very important from the point of view of thermal comfort of the clothing user as well as the protective efficiency against low or high temperature. Thermal protective clothing usually is a multilayer construction. Its thermal insulation is a resultant of a number of layers and their order, as well as the thermalinsulation properties of a ...

  11. Polyetherimide/bucky gels nanocomposites with superior conductivity and thermal stability

    KAUST Repository

    Chen, Ye

    2013-08-14

    Polyetherimide (PEI) nanocomposites comprising bucky gels of industrial-grade multiwalled carbon nanotubes (MWCNTs) and ionic liquid (IL, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIM][PF6])) were prepared. The processing framework for this nanocomposite is simple, reproducible, and easily scalable. The strong interaction between IL and MWCNTs caused the latter to uniformly disperse in the PEI matrix while IL flowed into the gaps between the nanotubes\\' walls. The nanocomposite exhibited an enhanced conductivity of 2.01 × 104 Ω·cm volume resistivity at room temperature; the value decreased dramatically by 12 orders of magnitude, compared to pristine PEI. The IL free ions and MWCNTs networks provided excellent channels for electron transfer. PEI/bucky gels nanocomposites also showed improved thermal stability and high tensile strength. Other than having antiwear properties, this material can have numerous applications in the aerospace and electronics industries. Moreover, our work presents a "green" method toward modified nanocomposites industrial production as IL is environmentally safe and is easily recyclable. © 2013 American Chemical Society.

  12. Thermal properties of an erythritol derivative

    Science.gov (United States)

    Trhlikova, Lucie; Prikryl, Radek; Zmeskal, Oldrich

    2016-06-01

    Erythritol (C4H10O4) is a sugar alcohol (or polyol) that is commonly used in the food industry. Its molar mass is 122.12 g.mol-1 and mass density 1450 kg.m-3. Erythritol, an odorless crystalline powder, can also be characterized by other physical parameters like melting temperature (121 °C) and boiling temperature (329 °C). The substance can be used for the accumulation of energy in heat exchangers based on various oils or water. The PlusICE A118 product manufactured by the PCM Products Ltd. company (melting temperature Θ = 118 °C, specific heat capacity cp = 2.70 kJ.K-1.kg-1, mass density 1450 kg.m-3, latent heat capacity 340 kJ.kg-1, volumetric heat capacity 493 MJ.m-3) is based on an erythritol-type medium. Thermal properties of the PlusICE A118 product in both solid and liquid phase were investigated for this purpose in terms of potential applications. Temperature dependences of its thermal parameters (thermal diffusivity, thermal conductivity, and specific heat) were determined using a transient (step-wise) method. A fractal model of heat transport was used for determination of the above thermal parameters. This model is independent of geometry and type of sample heating. Moreover, it also considers heat losses. The experiment confirmed the formerly declared value of phase change temperature, about 120 °C.

  13. Physiological properties of neurons in superficial layers of superior colliculus of rabbits

    Institute of Scientific and Technical Information of China (English)

    刘剑; 罗茀荪

    1996-01-01

    Neurons in superficial layers of the superior colliculus of the rabbit are classified into three types by their electrophysiological properties. Among them, two types belong to projecting neurons which send axons to the thalamic pulvinar (N=52) and dorsal lateral geniculate nucleus (N = 54) respectively. All other neurons are pooled into the third type (N=99). Projecting neurons of both types receive monosynaptic visual inputs via optic tract fibers of similar conduction velocity, indicating that in the superior colliculus of the rabbit, there is no difference in conduction velocity between the two pathways. They also receive trisynaptic inhibitory inputs, most likely via recurrent inhibitory circuits. The third type of neurons receives disynaptic optic and trisynaptic inhibitory inputs. The function of neurons of the third type is studied.

  14. Determining the Thermal Properties of Space Lubricants

    Science.gov (United States)

    Maldonado, Christina M.

    2004-01-01

    Many mechanisms used in spacecrafts, such as satellites or the space shuttle, employ ball bearings or gears that need to be lubricated. Normally this is not a problem, but in outer space the regular lubricants that are used on Earth will not function properly. Regular lubricants will quickly vaporize in the near vacuum of space. A unique liquid called a perfluoropolyalkylether (PFPE) has an extremely low vapor pressure, around l0(exp -10) torr at 20 C, and has been used in numerous satellites and is currently used in the space shuttle. Many people refer to the PFPEs as "liquid Teflon". PFPE lubricants however, have a number of problems with them. Lubricants need many soluble additives, especially boundary and anti-wear additives, in them to function properly. All the regular known boundary additives are insoluble in PFPEs and so PFPEs lubricate poorly under highly loaded conditions leading to many malfunctioning ball bearings and gears. JAXA, the Japanese Space Agency, is designing and building a centrifuge rotor to be installed in the International Space Station. The centrifuge rotor is part of a biology lab module. They have selected a PFPE lubricant to lubricate the rotor s ball bearings and NASA bearing experts feel this is not a wise choice. An assessment of the centrifuge rotor design is being conducted by NASA and part of the assessment entails knowing the physical and thermal properties of the PFPE lubricant. One important property, the thermal diffusivity, is not known. An experimental apparatus was set up in order to measure the thermal diffusivity of the PFPE. The apparatus consists of a constant temperature heat source, cylindrical Pyrex glassware, a thermal couple and digital thermometer. The apparatus was tested and calibrated using water since the thermal diffusivity of water is known.

  15. Experimental methods of determining thermal properties of granite

    Science.gov (United States)

    Determination of thermal properties of granite using the block method is discussed and compared with other methods. Problems that limit the accuracy of contact method in determining thermal properties of porous media are evaluated. Thermal properties of granite is determined in the laboratory with a...

  16. Microfabricated thermal conductivity sensor: a high resolution tool for quantitative thermal property measurement of biomaterials and solutions.

    Science.gov (United States)

    Liang, Xin M; Ding, Weiping; Chen, Hsiu-hung; Shu, Zhiquan; Zhao, Gang; Zhang, Hai-feng; Gao, Dayong

    2011-10-01

    Obtaining accurate thermal properties of biomaterials plays an important role in the field of cryobiology. Currently, thermal needle, which is constructed by enclosing a manually winded thin metal wire with an insulation coating in a metallic sheath, is the only available device that is capable of measuring thermal conductivity of biomaterials. Major drawbacks, such as macroscale sensor size, lack of versatile format to accommodate samples with various shapes and sizes, neglected effects of heat transfer inside the probe and thermal contact resistance between the sensing element and the probe body, difficult to mass produce, poor data repeatability and reliability and labor-intense sensor calibration, have significantly reduced their potential to be an essential measurement tool to provide key thermal property information of biological specimens. In this study, we describe the development of an approach to measure thermal conductivity of liquids and soft bio-tissues using a proof-of-concept MEMS based thermal probe. By employing a microfabricated closely-packed gold wire to function as the heater and the thermistor, the presented thermal sensor can be used to measure thermal conductivities of fluids and natural soft biomaterials (particularly, the sensor may be directly inserted into soft tissues in living animal/plant bodies or into tissues isolated from the animal/plant bodies), where other more standard approaches cannot be used. Thermal standard materials have been used to calibrate two randomly selected thermal probes at room temperature. Variation between the obtained system calibration constants is less than 10%. By incorporating the previously obtained system calibration constant, three randomly selected thermal probes have been successfully utilized to measure the thermal conductivities of various solutions and tissue samples under different temperatures. Overall, the measurements are in agreement with the recommended values (percentage error less than 5

  17. Biodegradable compounds: Rheological, mechanical and thermal properties

    Science.gov (United States)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  18. Thermal power sludge – properties, treatment, utilization

    Directory of Open Access Journals (Sweden)

    Martin Sisol

    2005-11-01

    Full Text Available In this paper a knowledge about properties of thermal power sludge from coal combustion in smelting boilers is presented. The physical and technological properties of slag – granularity, density, specific, volume and pouring weight, hardness and decoupling – together with chemical properties influence its exploitation. The possibility of concentrating the Fe component by the mineral processing technologies (wet low-intenzity magnetic separation is verified. An industrial use of the slag in civil engineering, e.g. road construction, was realised. The slag-fly ashes are directly utilized in the cement production as a substitute of a part of natural raw materials. For the use of slag as the stoneware in the road construction, all the criteria are fulfilled.

  19. Polyimide-Epoxy Composites with Superior Bendable Properties for Application in Flexible Electronics

    Science.gov (United States)

    Lee, Sangyoup; Yoo, Taewon; Han, Youngyu; Kim, Hanglim; Han, Haksoo

    2017-03-01

    The need for flexible electronics with outstanding bending properties is increasing due to the demand for wearable devices and next-generation flexible or rollable smartphones. In addition, the requirements for flexible or rigid-flexible electronics are sharply increasing to achieve the design of space-saving electronic devices. In this regard, coverlay (CL) film is a key material used in the bending area of flexible electronics, albeit infrequently. Because flexible electronics undergo folding and unfolding numerous times, CL films with superior mechanical and bending properties are required so that the bending area can endure such severe stress. However, because current CL films are only used for a designated bending area in the flexible electronics panel, their highly complicated and expensive manufacturing procedure is a disadvantage. In addition, the thickness of CL films must be decreased to satisfy the ongoing requirement for increasingly thin products. However, due to the limitations of the two-layer structure of existing CL films, the manufacturing process cannot be made more cost effective by simply applying more thin film onto the board. To address this problem, we have developed liquid coverlay inks (LCIs) with superior bendable properties, in comparison with CL films, when applied onto flexible electronics using a screen-printing method. The results show that LCIs have the potential to become one of the leading candidates to replace existing CL films because of their lower cost and faster manufacturing process.

  20. Polyimide-Epoxy Composites with Superior Bendable Properties for Application in Flexible Electronics

    Science.gov (United States)

    Lee, Sangyoup; Yoo, Taewon; Han, Youngyu; Kim, Hanglim; Han, Haksoo

    2017-08-01

    The need for flexible electronics with outstanding bending properties is increasing due to the demand for wearable devices and next-generation flexible or rollable smartphones. In addition, the requirements for flexible or rigid-flexible electronics are sharply increasing to achieve the design of space-saving electronic devices. In this regard, coverlay (CL) film is a key material used in the bending area of flexible electronics, albeit infrequently. Because flexible electronics undergo folding and unfolding numerous times, CL films with superior mechanical and bending properties are required so that the bending area can endure such severe stress. However, because current CL films are only used for a designated bending area in the flexible electronics panel, their highly complicated and expensive manufacturing procedure is a disadvantage. In addition, the thickness of CL films must be decreased to satisfy the ongoing requirement for increasingly thin products. However, due to the limitations of the two-layer structure of existing CL films, the manufacturing process cannot be made more cost effective by simply applying more thin film onto the board. To address this problem, we have developed liquid coverlay inks (LCIs) with superior bendable properties, in comparison with CL films, when applied onto flexible electronics using a screen-printing method. The results show that LCIs have the potential to become one of the leading candidates to replace existing CL films because of their lower cost and faster manufacturing process.

  1. Thermal Properties and Thermal Degradation of Cellulose Tri-Stearate (CTs

    Directory of Open Access Journals (Sweden)

    Feng-Yuan Huang

    2012-04-01

    Full Text Available Cellulose tri-stearate (CTs was synthesized employing trifluoroacetic anhydride (TFAA, stearic acid (SA, with microcrystal cellulose (MCC and characterized with FT-IR and 1H-NMR. The degree of substitution of CTs was determined by the traditional saponification method and 1H-NMR. The thermal properties of CTs were investigated by the thermogravimetric analysis (TGA under Ar flow in dynamic heating conditions. Thermal stability, activation energy, as well as the degradation mechanism of the decomposition process were revealed. The results showed that the thermal stability of CTs is superior to that of raw materials-MCC, and that the degradation of CTs in argon is a first-order weight loss; the initial decomposition temperature and the temperature corresponding to maximum degradation rate (Tp increase with an increase in heating rate. The activation energy values were calculated with the Ozawa method, Coats-Redfern method and Kinssinger method, respectively. Analyses of experimental results suggest that the degradation mechanism 0.10 < α < 0.80 is F2 type, A3 for α < 0.1, and R3 for α > 0.80. The degradation mechanism of CTs in the whole conversion range is a complex mechanism, and is the combination of A3, F2 and R3.

  2. Climate Change Expands the Spatial Extent and Duration of Preferred Thermal Habitat for Lake Superior Fishes

    OpenAIRE

    Cline, Timothy J.; Bennington, Val; James F Kitchell

    2013-01-01

    Climate change is expected to alter species distributions and habitat suitability across the globe. Understanding these shifting distributions is critical for adaptive resource management. The role of temperature in fish habitat and energetics is well established and can be used to evaluate climate change effects on habitat distributions and food web interactions. Lake Superior water temperatures are rising rapidly in response to climate change and this is likely influencing species distribut...

  3. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator.

    Science.gov (United States)

    Zhang, Jianjun; Liu, Zhihong; Kong, Qingshan; Zhang, Chuanjian; Pang, Shuping; Yue, Liping; Wang, Xuejiang; Yao, Jianhua; Cui, Guanglei

    2013-01-01

    A renewable and superior thermal-resistant cellulose-based composite nonwoven was explored as lithium-ion battery separator via an electrospinning technique followed by a dip-coating process. It was demonstrated that such nanofibrous composite nonwoven possessed good electrolyte wettability, excellent heat tolerance, and high ionic conductivity. The cells using the composite separator displayed better rate capability and enhanced capacity retention, when compared to those of commercialized polypropylene separator under the same conditions. These fascinating characteristics would endow this renewable composite nonwoven a promising separator for high-power lithium-ion battery.

  4. Prediction of Thermal and Elastic Properties of Honeycomb Sandwich Plate for Analysis of Thermal Deformation

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seok Min; Lee, Jang Il; Byun, Jae Ki; Choi, Young Don [Korea Univ., Seoul (Korea, Republic of)

    2014-04-15

    Thermal problems that are directly related to the lifetime of an electronic device are becoming increasingly important owing to the miniaturization of electronic devices. To solve thermal problems, it is essential to study thermal stability through thermal diffusion and insulation. A honeycomb sandwich plate has anisotropic thermal conductivity. To analyze the thermal deformation and temperature distribution of a system that employs a honeycomb sandwich plate, the thermal and elastic properties need to be determined. In this study, the thermal and elastic properties of a honeycomb sandwich plate, such as thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and shear modulus, are predicted. The properties of a honeycomb sandwich plate vary according to the hexagon size, thickness, and material properties.

  5. Development of a Nickel-base Cast Superalloy with High Strength and Superior Creep Properties

    Institute of Scientific and Technical Information of China (English)

    Jieshan HOU; Jianting GUO; Lanzhang ZHOU; Zhijun LI

    2005-01-01

    Derived from Russian alloy CHS88U, six experimental Ni-base alloys named as A to F in the Ni-Cr-Co-W-Ti-Al-Hf system are designed, evaluated and processed. One of these alloys, F, shows excellent high temperature tensile strength and ductility with superior creep rupture properties. As predicted by using modeling tools such as PHACOM and NEW PHACOMP, there is hardly the tendency for formation of topologically close-packed phase (TCP) phase in alloy F. Furthermore, through microstructural observation, it is also found that no TCP phase is formed in alloy F after long-time exposure at high temperature. So alloy F has well balance of phase stability and mechanical properties in view of application for gas turbines. It is proved that d-electron approach can be applied for design and development of nickel-base superalloys for gas turbine application.

  6. Rheological and Thermal Properties of Potato Starch

    Institute of Scientific and Technical Information of China (English)

    Zhong Geng; Li Tian-zhen; Zhang Wei-min; Li Hao-nan

    2005-01-01

    Particle size, rheological and thermal properties of potato starch from Yunnan province of China was in-vestigated. The particle size ranges from 0.429-102.3 um determined by laser light-scatter. The major flow type of 6 w/v% potato starch was shear-thinning fluid even the shear rate up to 800·s-1, and the gel formed by 6 w/v% potato starch fell to weak gel for its little difference between G' and G'', high dependence on frequency and low value of G'(Pa). The hardness and cohesiveness of potato starch gel were 31.3 g and 131.9 g·s, respectively. The thermal properties of potato starch were also determined by DSC at the starch:water=3:1. The To, Tp, and ΔH of potato starch were 62.23℃,67.31℃, and 2.22 J·g-1.

  7. Thermal protection materials: Thermophysical property data

    Science.gov (United States)

    Williams, S. D.; Curry, Donald M.

    1992-01-01

    This publication presents a thermophysical property survey on materials that could potentially be used for future spacecraft thermal protection systems (TPS). This includes data that was reported in the 1960's as well as more current information reported through the 1980's. An attempt was made to cite the manufacturers as well as the data source in the bibliography. This volume represents an attempt to provide in a single source a complete set of thermophysical data on a large variety of materials used in spacecraft TPS analysis. The property data is divided into two categories: ablative and reusable. The ablative materials have been compiled into twelve categories that are descriptive of the material composition. An attempt was made to define the Arrhenius equation for each material although this data may not be available for some materials. In a similar manner, char data may not be available for some of the ablative materials. The reusable materials have been divided into three basic categories: thermal protection materials (such as insulators), adhesives, and structural materials.

  8. Thermal properties of hemp fibre non-woven materials

    Science.gov (United States)

    Freivalde, Liga; Kukle, Silvija; Russell, Stephen

    2013-12-01

    This review considers the thermal properties analysis of hemp fiber non-woven materials made by three different manufacturing technologies - thermal bonding, needle-punching and hydro-entanglement. For non-wovens development two hemp fibers cultivars grown in Latvia were used - Purini and Bialobrzeskie. Thermal resistance, conductivity and the effects of several parameters on thermal performance are revised.

  9. Morphological and Thermal Properties of Cellulose Nanofibrils Reinforced Epoxy Nanocomposites

    Directory of Open Access Journals (Sweden)

    Deniz Aydemir

    2015-04-01

    Full Text Available Epoxy resins have gained attention as important adhesives because they are structurally stable, inert to most chemicals, and highly resistant to oxidation. Different particles can be added to adhesives to improve their properties. In this study, cellulose nanofibrils (CNFs, which have superior mechanical properties, were used as the reinforcing agent. Cellulose nanofi brils were added to epoxy in quantities of 1 %, 2 % and 3 % by weight to prepare nanocomposites. Morphological characterization of the composites was done with scanning electron microscopy (SEM. Thermal properties of the nanocomposites were investigated with Thermogravimetric Analyzer (TGA/DTG and Differential Scanning Calorimeter (DSC. SEM images showed that the cellulose nanofibrils were dispersed partially homogenous throughout the epoxy matrix for 1 % CNF. However, it was observed that the cellulose nanofibrils were aggregated (especially for 2 and 3 % CNFs in some parts of the SEM images, and the ratios of the aggregated parts increased as the loading rate of the cellulose nanofi brils increased. The TGA curve showed that DTG and decomposition temperature of pure epoxy was higher than that of the nanocomposites. The DSC curve showed that the glass transition temperature (Tg value of pure epoxy was found to be similar with Tg of the nanocomposites.

  10. Thermal behavior and Rheological Properties of PANI-DBSMPAN Blends

    Institute of Scientific and Technical Information of China (English)

    PAN Wei

    2007-01-01

    Conducting blends of polyacrylonitrile (PAN) copolymer and dodecylbenzene sulfonic acid doped polyaniline (PANI-DBSA) were prepared by solution blending of the two components.By means of various characterization methods including differential scanning calorimetry (DSC),thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and cone-plate rheometry,the effects of PANI-DBSA content on the thermal behavior, morphological and theological properties of the blends were investigated. A single and composition-dependent Tg was found for each of all blends and the thermal stability of PANI-DBSA/PAN was superior to that of both pure Co-PAN and PANI-DBSA. Rheological results show that the apparent viscosity of blend solution decreased at low PANI-DBSA content (2.5 wt%) while increased at high PANI-DBSA content (7.5wt%-10 wt%). Moreover, the shear-thinning appeared more distinctly with the incorporation of PANI-DBSA into the blend solutions especially at a high shear rate.

  11. Optical and Thermal Properties of In2S3

    Directory of Open Access Journals (Sweden)

    Faycel Saadallah

    2011-01-01

    Full Text Available Photothermal deflection spectroscopy (PDS is carried out in order to investigate thermal and optical properties of Al doped In2S3. The influence of thermal annealing on its gap energy as well as its thermal properties is revealed. In this way, we notice that thermal conductivity is increased and the gap energy is reduced. These features are probably due to the improvement of the crystalline structure of the sample.

  12. Optical and Thermal Properties of In2S3

    OpenAIRE

    Faycel Saadallah; Neila Jebbari; Najoua Kammoun; Noureddine Yacoubi

    2011-01-01

    Photothermal deflection spectroscopy (PDS) is carried out in order to investigate thermal and optical properties of Al doped In2S3. The influence of thermal annealing on its gap energy as well as its thermal properties is revealed. In this way, we notice that thermal conductivity is increased and the gap energy is reduced. These features are probably due to the improvement of the crystalline structure of the sample.

  13. Flexible Aerogel as a Superior Thermal Insulation for High Temperature Superconductor Cable Applications

    Science.gov (United States)

    White, S.; Demko, J.; Tomich, A.

    2010-04-01

    High temperature superconducting (HTS) cables are an advanced technology that can both strengthen and improve the national electrical distribution infrastructure. HTS cables require sufficient cooling to overcome inherent low temperature heat loading. Heat loads are minimized by the use of cryogenic envelopes or cryostats. Cryostats require improvement in efficiency, reliability, and cost reduction to meet the demanding needs of HTS conductors (1G and 2G wires). Aspen Aerogels has developed a compression resistant aerogel thermal insulation package to replace compression sensitive multi-layer insulation (MLI), the incumbent thermal insulation, in flexible cryostats for HTS cables. Oak Ridge National Laboratory tested a prototype aerogel package in a lab-scale pipe apparatus to measure the rate of heat invasion. The lab-scale pipe test results of the aerogel solution will be presented and directly compared to MLI. A compatibility assessment of the aerogel material with HTS system components will also be presented. The aerogel thermal insulation solution presented will meet the demanding needs of HTS cables.

  14. Thermal Properties of Cement-Based Composites for Geothermal Energy Applications.

    Science.gov (United States)

    Bao, Xiaohua; Memon, Shazim Ali; Yang, Haibin; Dong, Zhijun; Cui, Hongzhi

    2017-04-27

    Geothermal energy piles are a quite recent renewable energy technique where geothermal energy in the foundation of a building is used to transport and store geothermal energy. In this paper, a structural-functional integrated cement-based composite, which can be used for energy piles, was developed using expanded graphite and graphite nanoplatelet-based composite phase change materials (CPCMs). Its mechanical properties, thermal-regulatory performance, and heat of hydration were evaluated. Test results showed that the compressive strength of GNP-Paraffin cement-based composites at 28 days was more than 25 MPa. The flexural strength and density of thermal energy storage cement paste composite decreased with increases in the percentage of CPCM in the cement paste. The infrared thermal image analysis results showed superior thermal control capability of cement based materials with CPCMs. Hence, the carbon-based CPCMs are promising thermal energy storage materials and can be used to improve the durability of energy piles.

  15. Thermal properties measurements in biodiesel oils using photothermal techniques

    Science.gov (United States)

    Castro, M. P. P.; Andrade, A. A.; Franco, R. W. A.; Miranda, P. C. M. L.; Sthel, M.; Vargas, H.; Constantino, R.; Baesso, M. L.

    2005-08-01

    In this Letter, thermal lens and open cell photoacoustic techniques are used to measure the thermal properties of biodiesel oils. The absolute values of the thermal effusivity, thermal diffusivity, thermal conductivity and the temperature coefficient of the refractive index were determined for samples obtained from soy, castor bean, sunflower and turnip. The results suggest that the employed techniques may be useful as complementary methods for biodiesel certification.

  16. Improvements of reinforced silica aerogel nanocomposites thermal properties for architecture applications.

    Science.gov (United States)

    Saboktakin, Amin; Saboktakin, Mohammad Reza

    2015-01-01

    An 1,4-cis polybutadiene rubber/carboxymethyl starch (CMS)-based silica aerogel nanocomposites as a insulation material was developed that will provide superior thermal insulation properties, flexibility, toughness, durability of the parent polymer, yet with the low density and superior insulation properties associated with the aerogels. In this study, reinforced 1,4-cis polybutadiene-CMS-silica aerogel nanocomposites were prepared from a silica aerogel with a surface area 710 m(2) g(-1), a pore size of 25.3 nm and a pore volume of 4.7 cm(3) g(-1). The tensile properties and dynamic mechanical properties of 1,4-cis polybutadiene/CMS nanocomposites were systematically enhanced at low silica loading. Similar improvements in tensile modulus and strength have been observed for 1,4-cis polybutadiene/CMS mesoporous silica aerogel nanocomposites.

  17. Solid solution barium–strontium chlorides with tunable ammonia desorption properties and superior storage capacity

    DEFF Research Database (Denmark)

    Bialy, Agata; Jensen, Peter Bjerre; Blanchard, Didier

    2015-01-01

    with spray drying and in situ thermogravimetric and structural characterization, we synthesize a range of new, stable barium-strontium chloride solid solutions with superior ammonia storage densities. By tuning the barium/strontium ratio, different crystallographic phases and compositions can be obtained......Metal halide ammines are very attractive materials for ammonia absorption and storage—applications where the practically accessible or usable gravimetric and volumetric storage densities are of critical importance. Here we present, that by combining advanced computational materials prediction...... with different ammonia ab- and desorption properties. In particular it is shown, that in the molar range of 35–50% barium and 65–50% strontium, stable materials can be produced with a practically usable ammonia density (both volumetric and gravimetric) that is higher than any of the pure metal halides...

  18. Dendrimer-Linked Antifreeze Proteins Have Superior Activity and Thermal Recovery.

    Science.gov (United States)

    Stevens, Corey A; Drori, Ran; Zalis, Shiran; Braslavsky, Ido; Davies, Peter L

    2015-09-16

    By binding to ice, antifreeze proteins (AFPs) depress the freezing point of a solution and inhibit ice recrystallization if freezing does occur. Previous work showed that the activity of an AFP was incrementally increased by fusing it to another protein. Even larger increases in activity were achieved by doubling the number of ice-binding sites by dimerization. Here, we have combined the two strategies by linking multiple outward-facing AFPs to a dendrimer to significantly increase both the size of the molecule and the number of ice-binding sites. Using a heterobifunctional cross-linker, we attached between 6 and 11 type III AFPs to a second-generation polyamidoamine (G2-PAMAM) dendrimer with 16 reactive termini. This heterogeneous sample of dendrimer-linked type III constructs showed a greater than 4-fold increase in freezing point depression over that of monomeric type III AFP. This multimerized AFP was particularly effective at ice recrystallization inhibition activity, likely because it can simultaneously bind multiple ice surfaces. Additionally, attachment to the dendrimer has afforded the AFP superior recovery from heat denaturation. Linking AFPs together via polymers can generate novel reagents for controlling ice growth and recrystallization.

  19. Constraining Non-thermal and Thermal properties of Dark Matter

    Directory of Open Access Journals (Sweden)

    Bhupal eDev

    2014-05-01

    Full Text Available We describe the evolution of Dark Matter (DM abundance from the very onset of its creation from inflaton decay under the assumption of an instantaneous reheating. Based on the initial conditions such as the inflaton mass and its decay branching ratio to the DM species, the reheating temperature, and the mass and interaction rate of the DM with the thermal bath, the DM particles can either thermalize (fully/partially with the primordial bath or remain non-thermal throughout their evolution history. In the thermal case, the final abundance is set by the standard freeze-out mechanism for large annihilation rates, irrespective of the initial conditions. For smaller annihilation rates, it can be set by the freeze-in mechanism which also does not depend on the initial abundance, provided it is small to begin with. For even smaller interaction rates, the DM decouples while being non-thermal, and the relic abundance will be essentially set by the initial conditions. We put model-independent constraints on the DM mass and annihilation rate from over-abundance by exactly solving the relevant Boltzmann equations, and identify the thermal freeze-out, freeze-in and non-thermal regions of the allowed parameter space. We highlight a generic fact that inflaton decay to DM inevitably leads to an overclosure of the Universe for a large range of DM parameter space, and thus poses a stringent constraint that must be taken into account while constructing models of DM. For the thermal DM region, we also show the complementary constraints from indirect DM search experiments, Big Bang Nucleosynthesis, Cosmic Microwave Background, Planck measurements, and theoretical limits due to the unitarity of S-matrix. For the non-thermal DM scenario, we show the allowed parameter space in terms of the inflaton and DM masses for a given reheating temperature, and compute the comoving free-streaming length to identify the hot, warm and cold DM regimes.

  20. Thermal Properties of G-348 Graphite

    Energy Technology Data Exchange (ETDEWEB)

    McEligot, Donald M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Swank, W. David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cottle, David L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Valentin, Francisco I. [City Univ. (CUNY), NY (United States)

    2017-04-01

    Fundamental measurements have been obtained in the INL Graphite Characterization Laboratory to deduce the temperature dependence of thermal conductivity for G-348 isotropic graphite, which has been used by City College of New York in thermal experiments related to gas-cooled nuclear reactors. Measurements of thermal diffusivity, mass, volume and thermal expansion were converted to thermal conductivity in accordance with ASTM Standard Practice C781-08 (R-2014). Data are tabulated and a preliminary correlation for the thermal conductivity is presented as a function of temperature from laboratory temperature to 1000C.

  1. Electrodeposition of Gold on Lignocelluloses and Graphite-Based Composite Paper Electrodes for Superior Electrical Properties

    Science.gov (United States)

    Sultana, Ishrat; Razaq, Aamir; Idrees, M.; Asif, M. H.; Ali, Hassan; Arshad, Asim; Iqbal, Shahid; Ramay, Shahid M.; Hussain, Shahzada Qamar

    2016-10-01

    Graphite-based composites are commonly used as an anode and current collector for energy storage devices; however, they have inherently limited potential for large scale rechargeable systems due to a brittle structure. In this study, flexible and light-weight graphite-based electrodes are prepared by incorporation of lignocelluloses fibers directly collected from a self-growing plant, Typha Angistifolia. Electrical properties of graphite and lignocelluloses composite sheets are enhanced by electrodeposition of gold in a three-electrode setup. Electrochemical deposition of gold on a lignocelluloses/graphite paper electrode was obtained in potentiostatic mode by the application of reduction potential -0.95 V for 2000 s, 600 s, and 100 s. The gold-deposited paper electrodes showed efficient kinetics by shifting redox peaks towards lower potentials in cyclic voltammetry measurements, whereas impedance measurements revealed seven orders of magnitude reduction in the resistive properties. Incorporated flexibility and superior electrical/electrochemical performance within presented graphite-based composites will provide cutting-edge characteristics for high-tech application of energy storage devices by keeping a focus on modern disposable technology.

  2. Chemical and thermal properties of VIP latrine sludge

    African Journals Online (AJOL)

    2015-07-04

    Jul 4, 2015 ... 1Pollution Research Group, Department of Chemical Engineering, University ... Keywords: faecal sludge, VIP latrines, chemical properties, thermal properties ..... In: Proceedings of the EWB-UK National Research & Education.

  3. On sound absorption and thermal properties of non-wovens

    OpenAIRE

    Chen Jin-Jing; Yu Hong-Qin; Guo Zheng; You Jin-Zhang; Song Wen-Fang

    2015-01-01

    Non-woven is widely used as auxiliary materials of automobile industry due to its excellent sound absorption capability and good thermal property. The paper concludes that its density greatly affects sound absorption and thermal resistance, and an aluminum evaporated film can enhance the thermal resistance.

  4. On sound absorption and thermal properties of non-wovens

    Directory of Open Access Journals (Sweden)

    Chen Jin-Jing

    2015-01-01

    Full Text Available Non-woven is widely used as auxiliary materials of automobile industry due to its excellent sound absorption capability and good thermal property. The paper concludes that its density greatly affects sound absorption and thermal resistance, and an aluminum evaporated film can enhance the thermal resistance.

  5. Thermal-Insulation Properties of Multilayer Textile Packages

    Directory of Open Access Journals (Sweden)

    Matusiak Małgorzata

    2014-12-01

    Full Text Available Thermal-insulation properties of textile materials play a significant role in material engineering of protective clothing. Thermal-insulation properties are very important from the point of view of thermal comfort of the clothing user as well as the protective efficiency against low or high temperature. Thermal protective clothing usually is a multilayer construction. Its thermal insulation is a resultant of a number of layers and their order, as well as the thermalinsulation properties of a single textile material creating particular layers. The aim of the presented work was to investigate the relationships between the thermal-insulation properties of single materials and multilayer textile packages composed of these materials. Measurement of the thermal-insulation properties of single and multilayer textile materials has been performed with the Alambeta. The following properties have been investigated: thermal conductivity, resistance and absorptivity. Investigated textile packages were composed of two, three and four layers made of woven and knitted fabrics, as well as nonwovens. On the basis of the obtained results an analysis has been carried out in order to assess the dependency of the resultant values of the thermal-insulation properties of multilayer packages on the appropriate values of particular components.

  6. Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

    Directory of Open Access Journals (Sweden)

    Byong Chol Bai

    2015-01-01

    Full Text Available This paper investigates the thermal properties of asphalt mixtures modified with conductive fillers used for snow melting and solar harvesting pavements. Two different mixing processes were adopted to mold asphalt mixtures, dry- and wet-mixing, and two conductive fillers were used in this study, graphite and carbon black. The thermal conductivity was compared to investigate the effects of asphalt mixture preparing methods, the quantity, and the distribution of conductive filler on thermal properties. The combination of conductive filler with carbon fiber in asphalt mixture was evaluated. Also, rheological properties of modified asphalt binders with conductive fillers were measured using dynamic shear rheometer and bending beam rheometer at grade-specific temperatures. Based on rheological testing, the conductive fillers improve rutting resistance and decrease thermal cracking resistance. Thermal testing indicated that graphite and carbon black improve the thermal properties of asphalt mixes and the combined conductive fillers are more effective than the single filler.

  7. Functional Properties of Tooth Pulp Neurons Responding to Thermal Stimulation

    OpenAIRE

    Ahn, D.K.; Doutova, E.A.; McNaughton, K.; Light, A.R.; Närhi, M.; Maixner, W.

    2012-01-01

    The response properties of tooth pulp neurons that respond to noxious thermal stimulation of the dental pulp have been not well-studied. The present study was designed to characterize the response properties of tooth pulp neurons to noxious thermal stimulation of the dental pulp. Experiments were conducted on 25 male ferrets, and heat stimulation was applied by a computer-controlled thermode. Only 15% of tooth pulp neurons (n = 39) responded to noxious thermal stimulation of the teeth. Tooth ...

  8. Thermal properties of WC-10 wt. (% Co alloys

    Directory of Open Access Journals (Sweden)

    Francisco de Assis Léo Machado

    2008-03-01

    Full Text Available In this article, photothermal techniques were used in order to determine some thermal properties: diffusivity, conductivity, effusivity and specific heat capacity of WC-10 wt. (% Co six samples subjected to different sintering processes. The samples were sintered using high pressure - high temperature (HPHT sintering system. The open cell photoacoustic (OPC used to measure thermal diffusivity is described in detail. The values of thermal properties here measured and evaluated are consistent to those previously reported in the literature.

  9. Microstructure and thermal expansion properties of invar-type Cu-Zn-Al shape memory alloys

    Science.gov (United States)

    Wang, J. J.; Omori, T.; Sutou, Y.; Kainuma, R.; Ishida, K.

    2004-10-01

    The effects of grain size, volume fraction of the α (fcc) phase in the β (bcc) matrix, and thermal stability on low thermal expansion (LTE) properties of Cu-Zn-Al shape memory (SM) alloys induced by cold rolling were investigated by dilatometry, optical microscopy, differential scanning calorimetry, and electrical conductivity measurements. The alloys with the larger grains showed a superior two-way memory (TWM) effect, wider LTE temperature intervals with excellent thermal stability under 80°C. The α+β two-phase alloys also exhibited a good combination of cold workability and LTE properties. These results suggest that the Cu-Zn-Al alloys with high electrical conductivity of about 20% International Annealed Copper Standard (%IACS) have high potential as a new class of Invar alloys that can be applied in various fields.

  10. Thermal Shock Property of Al/Ni-ZrO2 Gradient Thermal Barrier Coatings

    Institute of Scientific and Technical Information of China (English)

    FANJin-juan; WANGQuan-sheng; ZHANGWei-fang

    2004-01-01

    Al/Ni-ZrO2 gradient thermal barrier coatings are made on aluminum substrate using plasma spraying method and one direction thermal shock properties of the coatings are studied in this paper. The results show that pores in coatings link to form cracks vertical to coating surface. They go through the whole ZrO2 coating once vertical cracks form. When thermal shock cycles increase, horizontal cracks that result in coatings failure forms in the coatings and interface. And vertical cracks delay appearance of horizontal cracks and enhance thermal shock property of coatings. Failure mechanisms of coating thermal shock are discussed using experiments and finite element method.

  11. Thermal Shock Property of Al/Ni-ZrO2 Gradient Thermal Barrier Coatings

    Institute of Scientific and Technical Information of China (English)

    FAN Jin-juan; WANG Quan-sheng; ZHANG Wei-fang

    2004-01-01

    Al/Ni-ZrO2 gradient thermal barrier coatings are made on aluminum substrate using plasma spraying method and one direction thermal shock properties of the coatings are studied in this paper. The results show that pores in coatings link to form cracks vertical to coating surface. They go through the whole ZrO2 coating once vertical cracks form. When thermal shock cycles increase, horizontal cracks that result in coatings failure forms in the coatings and interface. And vertical cracks delay appearance of horizontal cracks and enhance thermal shock property of coatings. Failure mechanisms of coating thermal shock are discussed using experiments and finite element method.

  12. Evaluation of properties and thermal stress field for thermal barrier coatings

    Institute of Scientific and Technical Information of China (English)

    王良; 齐红宇; 杨晓光; 李旭

    2008-01-01

    In order to get thermal stress field of the hot section with thermal barrier coating (TBCs), the thermal conductivity and elastic modulus of top-coat are the physical key properties. The porosity of top-coat was tested and evaluated under different high temperatures. The relationship between the microstructure (porosity of top-coat) and properties of TBCs were analyzed to predict the thermal properties of ceramic top-coat, such as thermal conductivity and elastic modulus. The temperature and stress field of the vane with TBCs were simulated using two sets of thermal conductivity data and elastic modulus, which are from literatures and this work, respectively. The results show that the temperature and stress distributions change with thermal conductivity and elastic modulus. The differences of maximum temperatures and stress are 6.5% and 8.0%, respectively.

  13. Ultrathin MoS2 Nanosheets with Superior Extreme Pressure Property as Boundary Lubricants

    Science.gov (United States)

    Chen, Zhe; Liu, Xiangwen; Liu, Yuhong; Gunsel, Selda; Luo, Jianbin

    2015-08-01

    In this paper, a new kind of oil-soluble ultrathin MoS2 nanosheets is prepared through a one-pot process. A superior extreme pressure property, which has not been attained with other nano-additives, is discovered when the nanosheets are used as lubricant additives. The as-synthesized MoS2 nanosheet is only a few atomic layers thick and tens of nanometers wide, and it is surface-modified with oleylamine so it can be well dispersed in oil or lubricant without adscititious dispersants or surfactants. By adding 1 wt% ultrathin MoS2 nanosheets, at the temperature of 120 °C, the highest load liquid paraffin can bear is tremendously improved from less than 50 N to more than 2000 N. Based on the tribological tests and analysis of the wear scar, a lubrication mechanism is proposed. It is believed that the good dispersion and the ultrathin shape of the nanosheets ensure that they can enter the contact area of the opposite sliding surfaces and act like a protective film to prevent direct contact and seizure between them. This work enriches the investigation of ultrathin MoS2 and has potential application in the mechanical industry.

  14. Eutectic mixtures of some fatty acids for latent heat storage: Thermal properties and thermal reliability with respect to thermal cycling

    Energy Technology Data Exchange (ETDEWEB)

    Sari, Ahmet [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)]. E-mail: asari@gop.edu.tr

    2006-06-15

    Accelerated thermal cycle tests have been conducted to study the change in melting temperatures and latent heats of fusion of the eutectic mixtures of lauric acid (LA)-myristic acid (MA), lauric acid (LA)-palmitic acid (PA) and myristic acid (MA)-stearic acid (SA) as latent heat storage materials. The thermal properties of these materials were determined by the differential scanning calorimetry (DSC) analysis method. The thermal reliability of the eutectic mixtures after melt/freeze cycles of 720, 1080 and 1460 was also evaluated using the DSC curves. The accelerated thermal cycle tests indicate that the melting temperatures usually tend to decrease, and the variations in the latent heats of fusion are irregular with increasing number of thermal cycles. Moreover, the probable reasons for the change in thermal properties of the eutectic mixtures after repeated thermal cycles were investigated. Fourier Transform Infrared (FT-IR) spectroscopic analysis indicates that the accelerated melt/freeze processes do not cause any degradation in the chemical structure of the mixtures. The change in thermal properties of the eutectic mixtures with increasing number of thermal cycles is only because of the presence of certain amounts of impurities in the fatty acids used in their preparation. It is concluded that the tested eutectic mixtures have reasonable thermal properties and thermal reliability as phase change materials (PCMs) for latent heat storage in any solar heating applications that include a four year utilization period.

  15. Method for measuring thermal properties using a long-wavelength infrared thermal image

    Science.gov (United States)

    Walker, Charles L.; Costin, Laurence S.; Smith, Jody L.; Moya, Mary M.; Mercier, Jeffrey A.

    2007-01-30

    A method for estimating the thermal properties of surface materials using long-wavelength thermal imagery by exploiting the differential heating histories of ground points in the vicinity of shadows. The use of differential heating histories of different ground points of the same surface material allows the use of a single image acquisition step to provide the necessary variation in measured parameters for calculation of the thermal properties of surface materials.

  16. Novel antifouling self-healing poly(carboxybetaine methacrylamide-co-HEMA) nanocomposite hydrogels with superior mechanical properties

    NARCIS (Netherlands)

    Kostina, Nina Yu.; Sharifi, Shahriar; Pereira, Andres de los Santos; Michalek, Jiri; Grijpma, Dirk W.; Rodriguez-Emmenegger, Cesar

    2013-01-01

    Novel antifouling highly wettable hydrogels with superior mechanical and self-healing properties are presented. Hydrogels were prepared by UV-initiated copolymerisation of non-fouling zwitterionic carboxybetaine methacrylamide (CBMAA-3) and 2-hydroxyethyl methacrylate (HEMA) in the presence of unifo

  17. Thermal and optical properties of porous silicon

    Directory of Open Access Journals (Sweden)

    Silva A. Ferreira da

    2001-01-01

    Full Text Available Thermal diffusivity and optical absorption have been investigated for porous silicon, at room temperature, using photoacoustic spectroscopy. The experimental results obtained conform well with the existing studies recently published. The value obtained for thermal diffusivity is 0.045 ± 0.002 cm²/s.The absorption onsets show energy structures, differing from the ordinary semiconductor of bulk type.

  18. Thermal properties of nonstoichiometry uranium dioxide

    Science.gov (United States)

    Kavazauri, R.; Pokrovskiy, S. A.; Baranov, V. G.; Tenishev, A. V.

    2016-04-01

    In this paper, was developed a method of oxidation pure uranium dioxide to a predetermined deviation from the stoichiometry. Oxidation was carried out using the thermogravimetric method on NETZSCH STA 409 CD with a solid electrolyte galvanic cell for controlling the oxygen potential of the environment. 4 samples uranium oxide were obtained with a different ratio of oxygen-to-metal: O / U = 2.002, O / U = 2.005, O / U = 2.015, O / U = 2.033. For the obtained samples were determined basic thermal characteristics of the heat capacity, thermal diffusivity, thermal conductivity. The error of heat capacity determination is equal to 5%. Thermal diffusivity and thermal conductivity of the samples decreased with increasing deviation from stoichiometry. For the sample with O / M = 2.033, difference of both values with those of stoichiometric uranium dioxide is close to 50%.

  19. Synthesis and thermal properties of new bionanofluids containing gold nanoparticles

    Science.gov (United States)

    Jiménez-Pérez, J. L.; López Gamboa, G.; Gutiérrez Fuentes, R.; Sánchez Ramírez, J. F.; Correa Pacheco, Z. N.; López-y-López, V. E.; Tepech-Carrillo, L.

    2016-10-01

    New bionanofluids containing Au nanoparticles with different concentrations were prepared by chemical reduction method. The nanoparticles were mixed with biodiesel from soybean prepared using alkaline catalysts. Thermal properties of biodiesel containing Au nanoparticles with different volume percentage concentrations were measured by mismatched dual-beam mode thermal lens technique in order to measure the effect of the presence of nanoparticles ( φ = 13.3 nm) on the bionanofluids thermal diffusivity. The characteristic time constant of the transient thermal lens was estimated by fitting the experimental data to the theoretical expression for transient thermal lens. The thermal diffusivity of the bionanofluids (biodiesel containing Au nanoparticles) seems to be strongly dependent on the presence of nanoparticles. It was observed an increase in the thermal diffusivity when volume percentage of nanoparticles increased. A possible explanation for such high thermal diffusivity of the biodiesel with Au nanoparticles is given. UV-Vis spectroscopy and TEM microscopy techniques were used to characterize the bionanofluids.

  20. Measurement of Thermal Properties of Biosourced Building Materials

    Science.gov (United States)

    Pierre, Thomas; Colinart, Thibaut; Glouannec, Patrick

    2014-10-01

    This paper presents both experimental and theoretical works concerning the evaluation of the thermal conductivity and thermal diffusivity of hemp concrete. Experimental measurements of thermal properties are performed using a hot-strip technique for temperatures ranging from 3 to 30 and relative humidities ranging from 0 % to 95 %, thus creating a large database for this material. These experimental thermal conductivities are then compared with the results from the Krischer theoretical predictive model. The comparison shows good agreement, and a predictive analytical relation between the hemp concrete thermal conductivity, temperature, and relative humidity is determined.

  1. Novel applications exploiting the thermal properties of nanostructured materials.

    Energy Technology Data Exchange (ETDEWEB)

    Eastman, J. A.

    1998-11-20

    A new class of heat transfer fluids, termed nanofluids, has been developed by suspending nanocrystalline particles in liquids. Due to the orders-of-magnitude larger thermal conductivities of solids compared to those of liquids such as water, significantly enhanced thermal properties are obtained with nanofluids. The use of nanofluids could impact many industrial sectors, including transportation, energy supply and production, electronics, textiles, and paper production by, for example, decreasing pumping power needs or reducing heat exchanger sizes. In contrast to the enhancement in effective thermal transport rates that is obtained when nanoparticles are suspended in fluids, nanocrystalline coatings are expected to exhibit reduced thermal conductivities compared to coarse-grained coatings. Reduced thermal conductivities are predicted to arise because of a reduction in the mean free path of phonons due to presence of grain boundaries. This behavior, combined with improved mechanical properties, makes nanostructured zirconia coatings excellent candidates for future applications as thermal barriers.

  2. Investigation of thermal properties of raw materials of asphalt mixtures

    Science.gov (United States)

    Géber, R.; Simon, A.; Kocserha, I.

    2017-02-01

    Asphalt mixtures are composite materials, which are made of different grades of mineral aggregates and bitumen. During the mixing process mineral materials were blended with bitumen at relatively high temperature (∼200 °C). As the binding process come off in these higher temperature range, thermal properties of asphaltic materials are important. The aim of this project is to reveal the thermal properties of raw materials. During our research two types of mineral aggregates were tested (limestone and dolomite) by different methods. Differential thermal analysis, thermal expansion and thermal conductivity were investigated at technologically important temperatures. The results showed that the structure of mineral materials did not change at elevated temperatures, expansion of samples was neglible, while thermal conductivity changed by temperature.

  3. Thermal properties of epoxy composites filled with boric acid

    Science.gov (United States)

    Visakh, P. M.; Nazarenko, O. B.; Amelkovich, Yu A.; Melnikova, T. V.

    2015-04-01

    The thermal properties of epoxy composites filled with boric acid fine powder at different percentage were studied. Epoxy composites were prepared using epoxy resin ED-20, boric acid as flame-retardant filler, hexamethylenediamine as a curing agent. The prepared samples and starting materials were examined using methods of thermal analysis, scanning electron microscopy and infrared spectroscopy. It was found that the incorporation of boric acid fine powder enhances the thermal stability of epoxy composites.

  4. Thermal properties of epoxy composites filled with boric acid

    OpenAIRE

    Visakh, P. M.; Nazarenko, Olga Bronislavovna; Amelkovich, Yuliya Alexandrovna; Melnikova, T. V.

    2015-01-01

    The thermal properties of epoxy composites filled with boric acid fine powder at different percentage were studied. Epoxy composites were prepared using epoxy resin ED-20, boric acid as flame-retardant filler, hexamethylenediamine as a curing agent. The prepared samples and starting materials were examined using methods of thermal analysis, scanning electron microscopy and infrared spectroscopy. It was found that the incorporation of boric acid fine powder enhances the thermal stability of ep...

  5. Thermal Transport Properties of Dry Spun Carbon Nanotube Sheets

    Directory of Open Access Journals (Sweden)

    Heath E. Misak

    2016-01-01

    Full Text Available The thermal properties of carbon nanotube- (CNT- sheet were explored and compared to copper in this study. The CNT-sheet was made from dry spinning CNTs into a nonwoven sheet. This nonwoven CNT-sheet has anisotropic properties in in-plane and out-of-plane directions. The in-plane direction has much higher thermal conductivity than the out-of-plane direction. The in-plane thermal conductivity was found by thermal flash analysis, and the out-of-plane thermal conductivity was found by a hot disk method. The thermal irradiative properties were examined and compared to thermal transport theory. The CNT-sheet was heated in the vacuum and the temperature was measured with an IR Camera. The heat flux of CNT-sheet was compared to that of copper, and it was found that the CNT-sheet has significantly higher specific heat transfer properties compared to those of copper. CNT-sheet is a potential candidate to replace copper in thermal transport applications where weight is a primary concern such as in the automobile, aircraft, and space industries.

  6. Estimation of thermal expansion properties of quasicrystalline alloys

    Institute of Scientific and Technical Information of China (English)

    齐育红; 张占平; 黑祖昆

    2004-01-01

    By investigating the thermal expansion properties of three quasicrystalline alloys Al65 Cu20 Cr15 quenched,Al65Cu20Cr15 cast and Al65Cu20Fe15 cast particles reinforced Al matrix composites from 25 ℃ to 500 ℃, the thermal expansion coefficients of three quasicrystalline alloys were theoretically estimated. The results show that the thermal expansion coefficients of the composites are much lower than that of pure Al, and the thermal expansion coefficients of the composites reinforced by Al-Cu-Cr quasicrystalline particles are lower than those of the composites reinforced by Al-Cu-Fe quasicrystalline particles. According to estimating, quasicrystalline alloys have negative thermal expansion coefficients, and the thermal expansion coefficients of Al-Cu-Cr quasicrystalline alloys are lower than those of Al-Cu-Fe quasicrystalline alloys. In the alloys, the more the qusicrystalline content, the lower the thermal expansion coefficient.

  7. Thermal properties of African yam bean seeds as influenced by ...

    African Journals Online (AJOL)

    Thermal properties of African yam bean seeds as influenced by moisture content and temperature. ... Nigerian Food Journal ... of the seeds determined using the American Society Agriculture Engineering Standard (ASAE) test was 9.6 % (d.b).

  8. Densely crosslinked polycarbosiloxanes .2. Thermal and mechanical properties

    NARCIS (Netherlands)

    Flipsen, T.A C; Derks, R.; van der Vegt, H.A.; Stenekes, R.; Pennings, A.J; Hadziioannou, G

    1997-01-01

    The thermal and mechanical properties of two densely crosslinked polycarbosiloxane systems were investigated in relation to the molecular structure. The networks were prepared from functional branched prepolymers and crosslinked via a hydrosilylation curing reaction. The prepolymers having only viny

  9. The influence of the sterilisation process on certain thermal properties.

    Science.gov (United States)

    Issa, Manal; Abreu, Maria Jose; Schacher, Laurence; Adolphe, Dominique; Cabeco Silva, Maria Elisabete

    2004-09-01

    Surgical clothing and sheets have to meet all the requirements set in the health-care industry regarding body comfort, absorption capacity and general recognition of physiological safety and sterilisation capacity. The disposable surgical gown market is growing and the demand will increase in all product groups and market sectors, where the health care industry is the most dynamic growth area. The aim of this study was to analyse some of the thermal properties of disposable surgical gowns before and after different sterilisation methods, and therefore the influence of the sterilisation process on their thermal comfort. The apparatus used to measure heat transfer properties was the Thermo Labo device (KES FB7) which evaluates the cool/warm sensation, thermal conductivity and insulation properties of the test item. The results obtained highlight the influence of the sterilisation process on the thermal and comfort properties.

  10. Thermal and Mechanical Properties of Poly-Dicyclopentadiene (DCPD) at Cryogenic Temperatures

    Science.gov (United States)

    Toplosky, V. J.; Walsh, R. P.

    2006-03-01

    Poly-diCylopentadiene (poly-DCPD) resins are widely used because of their excellent physical and mechanical properties and their compatibility with various molding techniques. Poly-DCPD's ability to be rotationally molded has generated the potential for this crosslinked thermoset polymer to be used for cryogenic tanks. In turn, this has generated the need for cryogenic materials property data on these resins. In a collaborative research agreement between the National High Magnetic Field Laboratory (NHMFL) and Cymetech LLC, five different variations of poly-DCPD have been thermally and mechanically characterized. Specifically, the tensile, compressive, shear and flexural properties have been measured at 77 K, as well as thermal contraction to 77 and 4 K. There are subtle differences in the properties between each formulation and larger discrepancies when compared to cryogenic data for other polymers. The thermal contraction to 77 K and elastic modulus are typical compared to other epoxies and polyester while the 77 K strength and elongation to failure are superior. The high strengths and elongations are good indicators that poly-DCPD also has good toughness — an important property in many low temperature applications. This initial cryogenic properties database for poly-DCPD allows it to be considered as a neat polymer in cryogenic applications, as well as an excellent matrix material for fiber reinforced composites in cryogenic applications.

  11. Dependence of Glass Mechanical Properties on Thermal and Pressure History

    DEFF Research Database (Denmark)

    Smedskjær, Morten Mattrup; Bauchy, Mathieu

    -equilibrium material, the structure and properties of glass depend not only on its composition, but also on its thermal and pressure histories. Here we review our recent findings regarding the thermal and pressure history dependence of indentation-derived mechanical properties of oxide glasses.......Predicting the properties of new glasses prior to manufacturing is a topic attracting great industrial and scientific interest. Mechanical properties are currently of particular interest given the increasing demand for stronger, thinner, and more flexible glasses in recent years. However, as a non...

  12. Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, Cemil; Sari, Ahmet; Karaipekli, Ali [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)

    2011-01-15

    This study deals with preparation, characterization, thermal properties and thermal reliability of n-eicosane microcapsules as novel phase change material (PCM) for thermal energy storage. The microcapsulated PCMs were prepared by coating n-eicosane with polymethylmethacrylate (PMMA) shell. Fourier transform infrared (FT-IR), scanning electron microscope (SEM) and particle size distribution (PSD) analysis were used to characterize the PMMA/eicosane microcapsules as microcapsulated PCMs. The PSD analysis indicated that the average diameter of microcapsules was found to be 0.70 {mu}m under the stirring speed of 2000 rpm. Thermal properties and thermal reliability of the microcapsules were determined using differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA) methods. From DSC analysis, the melting and freezing temperatures and the latent heats of the microcapsules were measured as 35.2 C and 34.9 C, 84.2 and -87.5 J/g, respectively. TGA analysis indicated that PMMA/eicosane microcapsules degrade in three steps at considerably high temperatures. Accelerated thermal cycling tests have been also applied to show the thermal reliability of the microcapsules. All results showed that thermal properties make the PMMA/eicosane microcapsules potential PCM for thermal energy storage. (author)

  13. Thermal transport properties of thermally sprayed coatings: An integrated study of materials, processing and microstructural effects

    Science.gov (United States)

    Chi, Weiguang

    The complex microstructures of thermally sprayed coatings are very sensitive to processing conditions and have a significant influence on the properties. The thermal transport property is a very important design parameter for thermally sprayed coatings. Despite considerable progress in this area, there is continued need to clarify the interrelationships among processing, microstructure and thermal transport properties. This has been enabled through continued advancements in processing science and control, enhancements in microstructural characterization and new methods of property characterization. The purpose of this research is to seek a successive pathway to prior efforts in understanding the effect of microstructural defects on the thermal transport property of thermally sprayed coatings. Relationship between microstructure and thermal conductivity is investigated for three sets of plasma sprayed yttria stabilized zirconia (YSZ) coating systems made using different morphology powders, different particle size distribution and controlled modification of particle states via plasma torch parameters. By integrating the results, maps of the thermal conductivity-porosity relationship have been established. Such maps highlight the role of splat thickness and interfaces in thermal conductivity. Furthermore, a new microstructural parameter termed "effective porosity" is proposed which considers the dominating role of interlamellar pores on through thickness thermal transport in thermally sprayed coatings. This effective porosity is rationalized based on the heat transport mechanism and enables better understanding of microstructure-thermal transport property correlation. An inverse linear model and a percolation model are established which can serve as predictive tools for understanding microstructure-thermal conductivity relationships. In addition, a systematic assessment of thermal conductivity anisotropy has been carried out for YSZ, Al2O 3 and several metallic

  14. Cross-plane thermal properties of transition metal dichalcogenides

    Energy Technology Data Exchange (ETDEWEB)

    Muratore, C. [Department of Chemical and Materials Engineering, University of Dayton, Dayton, Ohio 45469 (United States); Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Varshney, V. [Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Universal Technology Corporation, Dayton, Ohio 45432 (United States); Gengler, J. J. [Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Spectral Energies LLC, Dayton, Ohio 45431 (United States); Hu, J. J.; Bultman, J. E. [Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); University of Dayton Research Institute, Dayton, Ohio 45469 (United States); Smith, T. M. [Department of Materials Science and Engineering, Ohio State University, Columbus, Ohio 43210 (United States); Shamberger, P. J.; Roy, A. K.; Voevodin, A. A. [Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Qiu, B.; Ruan, X. [Department of Mechanical Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States)

    2013-02-25

    In this work, we explore the thermal properties of hexagonal transition metal dichalcogenide compounds with different average atomic masses but equivalent microstructures. Thermal conductivity values of sputtered thin films were compared to bulk crystals. The comparison revealed a >10 fold reduction in thin film thermal conductivity. Structural analysis of the films revealed a turbostratic structure with domain sizes on the order of 5-10 nm. Estimates of phonon scattering lengths at domain boundaries based on computationally derived group velocities were consistent with the observed film microstructure, and accounted for the reduction in thermal conductivity compared to values for bulk crystals.

  15. In situ thermally reduced graphene oxide/epoxy composites: thermal and mechanical properties

    Science.gov (United States)

    Olowojoba, Ganiu B.; Eslava, Salvador; Gutierrez, Eduardo S.; Kinloch, Anthony J.; Mattevi, Cecilia; Rocha, Victoria G.; Taylor, Ambrose C.

    2016-10-01

    Graphene has excellent mechanical, thermal, optical and electrical properties and this has made it a prime target for use as a filler material in the development of multifunctional polymeric composites. However, several challenges need to be overcome to take full advantage of the aforementioned properties of graphene. These include achieving good dispersion and interfacial properties between the graphene filler and the polymeric matrix. In the present work, we report the thermal and mechanical properties of reduced graphene oxide/epoxy composites prepared via a facile, scalable and commercially viable method. Electron micrographs of the composites demonstrate that the reduced graphene oxide (rGO) is well dispersed throughout the composite. Although no improvements in glass transition temperature, tensile strength and thermal stability in air of the composites were observed, good improvements in thermal conductivity (about 36 %), tensile and storage moduli (more than 13 %) were recorded with the addition of 2 wt% of rGO.

  16. Thermal properties of cutting tool coatings at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Martan, J., E-mail: jmartan@ntc.zcu.cz [Department of Physics, University of West Bohemia, Univerzitni 22, 30614 Plzen (Czech Republic); New Technologies Research Centre, University of West Bohemia, Univerzitni 8, 30614 Plzen (Czech Republic); Benes, P. [Department of Material Science and Technology, University of West Bohemia, Univerzitni 22, 30614 Plzen (Czech Republic)

    2012-07-10

    Highlights: Black-Right-Pointing-Pointer Thermal properties of coatings for cutting tools measured in range from 20 to 500 Degree-Sign C. Black-Right-Pointing-Pointer Coatings were based on nitrides of Ti, Al, Cr and Si. Black-Right-Pointing-Pointer Thermal conductivity varies from 2.8 to 25 W m{sup -1} K{sup -1} and grows with temperature. Black-Right-Pointing-Pointer Lowest thermal conductivity was observed for CrAlSiN coating. - Abstract: Cutting tools with coated inserts are widely used in high-speed cutting and in the cutting of hard-to-machine materials. The thermal properties of the coatings (or thin films) have a major impact on the cutting process and tool life. As there is a lack of data for high temperatures, we are presenting an experimental study of thermal conductivity and volumetric specific heat of different coatings in the range from room temperature to 500 Degree-Sign C. The coatings under investigation were TiN, TiAlCN, TiAlN, AlTiN, TiAlSiN and CrAlSiN. The thermal properties were measured using the pulsed photothermal radiometry method. The thermal conductivity of the coatings under investigation varied from 2.8 to 25 W m{sup -1} K{sup -1} and increased with the rise in temperature. The lowest thermal conductivity was observed for the CrAlSiN coating.

  17. Thermal properties of graphene-copper-graphene heterogeneous films.

    Science.gov (United States)

    Goli, Pradyumna; Ning, Hao; Li, Xuesong; Lu, Ching Yu; Novoselov, Konstantin S; Balandin, Alexander A

    2014-03-12

    We demonstrated experimentally that graphene-Cu-graphene heterogeneous films reveal strongly enhanced thermal conductivity as compared to the reference Cu and annealed Cu films. Chemical vapor deposition of a single atomic plane of graphene on both sides of 9 μm thick Cu films increases their thermal conductivity by up to 24% near room temperature. Interestingly, the observed improvement of thermal properties of graphene-Cu-graphene heterofilms results primarily from the changes in Cu morphology during graphene deposition rather than from graphene's action as an additional heat conducting channel. Enhancement of thermal properties of graphene-capped Cu films is important for thermal management of advanced electronic chips and proposed applications of graphene in the hybrid graphene-Cu interconnect hierarchies.

  18. Thermal properties of graphene and nanostructured carbon materials

    Science.gov (United States)

    Balandin, Alexander A.

    2011-08-01

    Recent years have seen a rapid growth of interest by the scientific and engineering communities in the thermal properties of materials. Heat removal has become a crucial issue for continuing progress in the electronic industry, and thermal conduction in low-dimensional structures has revealed truly intriguing features. Carbon allotropes and their derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range -- of over five orders of magnitude -- from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. Here, I review the thermal properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. Special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe the prospects of applications of graphene and carbon materials for thermal management of electronics.

  19. Thermal Properties of Algerian Diatomite, Study of the Possibility to Its Use in the Thermal Insulation

    Science.gov (United States)

    Hamdi, Boualem; Hamdi, Safia

    The chemical and physical properties of a Algerian diatomite were given before and after heat treatment and chemical with an aim of a use in the heat insulation of constructions. The preliminary results obtained showed that this material is extremely porous (porosity >70 %), characterized of a low density and a very low thermal conductivity. These promising properties support the use of this local material in the thermal insulation.

  20. Thermal characterization and properties of a copper-diamond composite

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Pin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chavez, Thomas P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); DiAntonio, Christopher Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Coker, Eric Nicholas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    The thermal properties of a commercial copper-diamond composite were measured from below -50°C to above 200°C. The results of thermal expansion, heat capacity, and thermal diffusivity were reported. These data were used to calculate the thermal conductivity of the composite as a function of temperature in the thickness direction. These results are compared with estimated values based on a simple mixing rule and the temperature dependence of these physical properties is represented by curve fitting equations. These fitting equations can be used for thermal modeling of practical devices/systems at their operation temperatures. The results of the mixing rule showed a consistent correlation between the amount of copper and diamond in the composite, based on density, thermal expansion, and heat capacity measurements. However, there was a disparity between measured and estimated thermal diffusivity and thermal conductivity. These discrepancies can be caused by many intrinsic material issues such as lattice defects and impurities, but the dominant factor is attributed to the large uncertainty of the interfacial thermal conductance between diamond and copper.

  1. Glass-forming property of hydroxyectoine is the cause of its superior function as a desiccation protectant

    OpenAIRE

    Erwin Arno Galinski; Christoph eTanne; Andrea eMeffert; Golovina, Elena A; Hoekstra, Folkert A.

    2014-01-01

    We were able to demonstrate that hydroxyectoine, in contrast to ectoine, is a good glass-forming compound. Fourier transform infrared (FTIR) and spin label electron spin resonance (ESR) studies of dry ectoine and hydroxyectoine have shown that the superior glass-forming properties of hydroxyectoine result from stronger intermolecular H-bonds with the OH group of hydroxyectoine. Spin probe experiments have also shown that better molecular immobilization in dry hydroxyectoine provides better re...

  2. Thermal properties of composite materials: a complex systems approximation

    Science.gov (United States)

    Carrillo, J. L.; Bonilla, Beatriz; Reyes, J. J.; Dossetti, Victor

    We propose an effective media approximation to describe the thermal diffusivity of composite samples made of polyester resin and magnetite inclusions. By means of photoacoustic spectroscopy, the thermal diffusivity of the samples were experimentally measured. The volume fraction of the inclusions was systematically varied in order to study the changes in the effective thermal diffusivity of the composites. For some samples, a static magnetic field was applied during the polymerization process, resulting in anisotropic inclusion distributions. Our results show a significant difference in the thermal properties of the anisotropic samples, compared to the isotropic randomly distributed. We correlate some measures of the complexity of the inclusion structure with the observed thermal response through a multifractal analysis. In this way, we are able to describe, and at some extent predict, the behavior of the thermal diffusivity in terms of the lacunarity and other measures of the complexity of these samples Partial Financial Support by CONACyT México and VIEP-BUAP.

  3. Thermal structural properties of calcium tungstate

    Energy Technology Data Exchange (ETDEWEB)

    Senyshyn, Anatoliy; Hoelzel, Markus [Technische Univ. Darmstadt (Germany). Inst. for Materials Science; Technische Univ. Muenchen, Garching (Germany). Forschungsneutronenquelle Heinz Maier-Leibnitz FRM-II; Hansen, Thomas [Institute Laue-Langevin, Grenoble (France); Vasylechko, Leonid [Lviv Polytechnic National Univ. (Ukraine). Semiconductor Electronics Dept.; Mikhailik, Vitaliy [Diamond Light Source, Harwell Science and Innovation Campus, Didcot (United Kingdom); Oxford Univ. (United Kingdom). Dept. of Physics; Kraus, Hans [Oxford Univ. (United Kingdom). Dept. of Physics; Ehrenberg, Helmut [Technische Univ. Darmstadt (Germany). Inst. for Materials Science; IFW Dresden (Germany)

    2011-04-15

    The results of in-situ temperature-resolved powder diffraction studies of CaWO{sub 4} scheelite using both synchrotron radiation and neutron scattering are reported. The studies performed over a broad temperature range of 5-1773 K confirm the scheelite type of structure for calcium tungstate over the whole temperature range. The anisotropy of thermal expansion in calcium tungstate as well as the rigidity of WO{sub 4} complexes have been analysed in terms of bond distances, interatomic angles and anisotropic displacement parameters. The WO{sub 4}{sup 2-} complex anions showed a remarkable robustness in the whole studied temperature range, thus pointing out that the layered structure formed by two-dimensional CsCl-type arrangements of Ca cations and WO{sub 4} complexes is the primary reason for the anisotropy of thermal expansion in calcium tungstate. (orig.)

  4. Determination of thermal properties of composting bulking materials.

    Science.gov (United States)

    Ahn, H K; Sauer, T J; Richard, T L; Glanville, T D

    2009-09-01

    Thermal properties of compost bulking materials affect temperature and biodegradation during the composting process. Well determined thermal properties of compost feedstocks will therefore contribute to practical thermodynamic approaches. Thermal conductivity, thermal diffusivity, and volumetric heat capacity of 12 compost bulking materials were determined in this study. Thermal properties were determined at varying bulk densities (1, 1.3, 1.7, 2.5, and 5 times uncompacted bulk density), particle sizes (ground and bulk), and water contents (0, 20, 50, 80% of water holding capacity and saturated condition). For the water content at 80% of water holding capacity, saw dust, soil compost blend, beef manure, and turkey litter showed the highest thermal conductivity (K) and volumetric heat capacity (C) (K: 0.12-0.81 W/m degrees C and C: 1.36-4.08 MJ/m(3) degrees C). Silage showed medium values at the same water content (K: 0.09-0.47 W/m degrees C and C: 0.93-3.09 MJ/m(3) degrees C). Wheat straw, oat straw, soybean straw, cornstalks, alfalfa hay, and wood shavings produced the lowest K and C values (K: 0.03-0.30 W/m degrees C and C: 0.26-3.45 MJ/m(3) degrees C). Thermal conductivity and volumetric heat capacity showed a linear relationship with moisture content and bulk density, while thermal diffusivity showed a nonlinear relationship. Since the water, air, and solid materials have their own specific thermal property values, thermal properties of compost bulking materials vary with the rate of those three components by changing water content, bulk density, and particle size. The degree of saturation was used to represent the interaction between volumes of water, air, and solids under the various combinations of moisture content, bulk density, and particle size. The first order regression models developed in this paper represent the relationship between degree of saturation and volumetric heat capacity (r=0.95-0.99) and thermal conductivity (r=0.84-0.99) well. Improved

  5. Measurement and model on thermal properties of sintered diamond composites

    Energy Technology Data Exchange (ETDEWEB)

    Moussa, Tala, E-mail: Tala.moussa@univ-nantes.fr [Laboratoire de Thermocinetique UMR CNRS 6607, Polytech, Universite de nantes, BP 50609, rue Christian Pauc, 44306 Nantes (France); Garnier, Bertrand; Peerhossaini, Hassan [Laboratoire de Thermocinetique UMR CNRS 6607, Polytech, Universite de nantes, BP 50609, rue Christian Pauc, 44306 Nantes (France)

    2013-02-25

    Highlights: Black-Right-Pointing-Pointer Thermal properties of sintered diamond used for grinding is studied. Black-Right-Pointing-Pointer Flash method with infrared temperature measurement is used to investigate. Black-Right-Pointing-Pointer Thermal conductivity increases with the amount of diamond. Black-Right-Pointing-Pointer It is very sensitive to binder conductivity. Black-Right-Pointing-Pointer Results agree with models assuming imperfect contact between matrix and particles. - Abstract: A prelude to the thermal management of grinding processes is measurement of the thermal properties of working materials. Indeed, tool materials must be chosen not only for their mechanical properties (abrasion performance, lifetime Horizontal-Ellipsis ) but also for thermal concerns (thermal conductivity) for efficient cooling that avoids excessive temperatures in the tool and workpiece. Sintered diamond is currently used for grinding tools since it yields higher performances and longer lifetimes than conventional materials (mineral or silicon carbide abrasives), but its thermal properties are not yet well known. Here the thermal conductivity, heat capacity and density of sintered diamond are measured as functions of the diamond content in composites and for two types of metallic binders: hard tungsten-based and soft cobalt-based binders. The measurement technique for thermal conductivity is derived from the flash method. After pulse heating, the temperature of the rear of the sample is measured with a noncontact method (infrared camera). A parameter estimation method associated with a three-layer nonstationary thermal model is used to obtain sample thermal conductivity, heat transfer coefficient and absorbed energy. With the hard metallic binder, the thermal conductivity of sintered diamond increased by up to 64% for a diamond content increasing from 0 to 25%. The increase is much less for the soft binder: 35% for diamond volumes up to 25%. In addition, experimental data

  6. Anisotropic thermal property of magnetically oriented carbon nanotube polymer composites

    Science.gov (United States)

    Li, Bin; Dong, Shuai; Wang, Caiping; Wang, Xiaojie; Fang, Jun

    2016-04-01

    This paper proposes a method for preparing multi-walled carbon nanotubea/polydimethylsiloxane (MWCNTs/PDMS) composites with enhanced thermal properties by using a high magnetic field (up to 10T). The MWCNT are oriented magnetically inside a silicone by in-situ polymerization method. The anisotropic structure would be expected to produce directional thermal conductivity. This study will provide a new approach to the development of anisotropic thermal-conductive polymer composites. Systematic studies with the preparation of silicone/graphene composites corresponding to their thermal and mechanical properties are carried out under various conditions: intensity of magnetic field, time, temperature, fillings. The effect of MWCNT/graphene content and preparation procedures on thermal conductivity of composites is investigated. Dynamic mechanical analysis (DMA) is used to reveal the mechanical properties of the composites in terms of the filling contents and magnetic field strength. The scanning electron microscope (SEM) is used to observe the micro-structure of the MWCNT composites. The alignment of MWCNTs in PDMS matrix is also studied by Raman spectroscopy. The thermal conductivity measurements show that the magnetically aligned CNT-composites feature high anisotropy in thermal conductivity.

  7. Structural, optical and thermal properties of nanoporous aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Ghrib, Taher, E-mail: taher.ghrib@yahoo.fr

    2015-01-10

    Highlights: • A simple electrochemical technique is presented and used to manufacture a porous aluminum layer. • Manufactured pores of 40 nm diameter and 200 nm depth are filled by nanocrystal of silicon and graphite. • Dimensions of pores increase with the anodization current which ameliorate the optical and thermal properties. • A new thermal method is presented which permit to determine the pores density and the layer thickness. • All properties show that the manufactured material can be used with success in solar cells. - Abstract: In this work the structural, thermal and optical properties of porous aluminum thin film formed with various intensities of anodization current in sulfuric acid are highlighted. The obtained pores at the surface are filled by sprayed graphite and nanocrystalline silicon (nc-Si) thin films deposited by plasma enhancement chemical vapor deposition (PECVD) which the role is to improve its optical and thermal absorption giving a structure of an assembly of three different media such as deposited thin layer (graphite or silicon)/(porous aluminum layer filled with the deposited layer)/(Al sample). The effect of anodization current on the microstructure of porous aluminum and the effect of the deposited layer were systematically studied by atomic force microscopy (AFM), transmission electron microscopy (TEM) and Raman spectroscopy. The thermal properties such as the thermal conductivity (K) and thermal diffusivity (D) are determined by the photothermal deflection (PTD) technique which is a non destructive technique. Based on this full characterization, it is demonstrated that the thermal and optical characteristics of these films are directly correlated to their micro-structural properties.

  8. Tunable preparation of ruthenium nanoparticles with superior size-dependent catalytic hydrogenation properties

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yuan; Luo, Yaodong; Yang, Xuan; Yang, Yaxin; Song, Qijun, E-mail: qsong@jiangnan.edu.cn

    2017-06-15

    Highlights: • A facile and efficient strategy is firstly developed for the synthesis of Ru NPs. • Ru NPs are stable and uniform with the controllable sizes from 2.6 to 51.5 nm. • Ru NPs exhibit size-dependent and superior catalytic hydrogenation activity. - Abstract: Ruthenium (Ru) featured with an unusual catalytic behavior is of great significance in several heterogeneous and electro-catalytic reactions. The preparation of tractable Ru nanocatalysts and the building of highly active catalytic system at ambient temperature remains a grand challenge. Herein, a facile strategy is developed for the controllable preparation of Ru nanoparticles (NPs) with the sizes ranging from 2.6 to 51.5 nm. Ru NPs show superior size-dependent catalytic performance with the best kinetic rate constant as high as −1.52 min{sup −1}, which could far surpass the other traditional noble metals. Ru NPs exert exceedingly efficient low-temperature catalytic activity and good recyclability in the catalytic reduction of nitroaromatic compounds (NACs) and azo dyes. The developed catalytic system provides a distinguishing insight for the artificial preparation of Ru NPs with desired sizes, and allows for the development of rational design rules for exploring catalysts with superior catalytic performances, potentially broadening the applications of metallic NP-enabled catalytic analysis.

  9. Atomic, Crystal, Elastic, Thermal, Nuclear, and Other Properties of Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, A

    2006-02-01

    This report is part of a series of documents that provide a background to those involved in the construction of beryllium components and their applications. This report is divided into five sub-sections: Atomic/Crystal Structure, Elastic Properties, Thermal Properties, Nuclear Properties, and Miscellaneous Properties. In searching through different sources for the various properties to be included in this report, inconsistencies were at times observed between these sources. In such cases, the values reported by the Handbook of Chemistry and Physics was usually used. In equations, except where indicated otherwise, temperature (T) is in degrees Kelvin.

  10. Improved Inversion of Needle Probe Data for the Determination of Rock Thermal Properties

    DEFF Research Database (Denmark)

    Bording, Thue Sylvester; Balling, N.; Nielsen, S.B.

    Heat flow, thermal conductivity and thermal diffusivity are essential properties in subsurface temperature modelling. We present initial results of a novel inversion approach for laboratory measurements of rock thermal conductivity and thermal diffusivity by the needle probe method. Instead...

  11. High pressure elasticity and thermal properties of depleted uranium

    Science.gov (United States)

    Jacobsen, M. K.; Velisavljevic, N.

    2016-04-01

    Studies of the phase diagram of uranium have revealed a wealth of high pressure and temperature phases. Under ambient conditions the crystal structure is well defined up to 100 gigapascals (GPa), but very little information on thermal conduction or elasticity is available over this same range. This work has applied ultrasonic interferometry to determine the elasticity, mechanical, and thermal properties of depleted uranium to 4.5 GPa. Results show general strengthening with applied load, including an overall increase in acoustic thermal conductivity. Further implications are discussed within. This work presents the first high pressure studies of the elasticity and thermal properties of depleted uranium metal and the first real-world application of a previously developed containment system for making such measurements.

  12. Thermal properties of single-walled carbon nanotube crystal

    Institute of Scientific and Technical Information of China (English)

    Hu Li-Jun; Liu Ji; Liu Zheng; Qiu Cai-Yu; Zhou Hai-Qing; Sun Lian-Feng

    2011-01-01

    In this work,the thermal properties of a single-walled carbon nanotube (SWCNT) crystal are studied. The thermal conductivity of the SWCNT crystal is found to have a linear dependence on temperature in the temperature range from 1.9 K to 100.0 K. In addition,a peak (658 W/mK) is found at a temperature of about 100.0 K. The thermal conductivity decreases gradually to a value of 480 W/mK and keeps almost a constant in the temperature range from 100.0 K to 300.0 K. Meanwhile,the specific heat shows an obvious linear relationship with temperature in the temperature range from 1.9 K to 300.0 K. We discuss the possible mechanisms for these unique thermal properties of the single-walled carbon nanotube crystal.

  13. Thermal Properties of Anionic Polyurethane Composition for Leather Finishing

    Directory of Open Access Journals (Sweden)

    Olga KOVTUNENKO

    2016-09-01

    Full Text Available Thermal properties of anionic polyurethane composition mixed with collagen product and hydrophilic sodium form of montmorillonite for use in the finishing of leather were studied by thermogravimetric method. The thermal indices of processes of thermal and thermo-oxidative destruction depending on the polyurethane composition were determined. The influence of anionic polyurethane composition on thermal behavior of chromium tanned gelatin films that imitate the leather were studied. APU composition with natural compounds increases their thermal stability both in air and in nitrogen atmosphere due to the formation of additional bonds between active groups of APU, protein and chrome tanning agent as the result of chemical reactions between organic and inorganic parts with the new structure formation.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.10043

  14. Thermal Properties of Anionic Polyurethane Composition for Leather Finishing

    Directory of Open Access Journals (Sweden)

    Olga KOVTUNENKO

    2016-09-01

    Full Text Available Thermal properties of anionic polyurethane composition mixed with collagen product and hydrophilic sodium form of montmorillonite for use in the finishing of leather were studied by thermogravimetric method. The thermal indices of processes of thermal and thermo-oxidative destruction depending on the polyurethane composition were determined. The influence of anionic polyurethane composition on thermal behavior of chromium tanned gelatin films that imitate the leather were studied. APU composition with natural compounds increases their thermal stability both in air and in nitrogen atmosphere due to the formation of additional bonds between active groups of APU, protein and chrome tanning agent as the result of chemical reactions between organic and inorganic parts with the new structure formation.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.10043

  15. Thermal properties of continuously spun carbon nanotube fibres

    Science.gov (United States)

    Koziol, Krzysztof K.; Janas, Dawid; Brown, Elisabetta; Hao, Ling

    2017-04-01

    As indicated by theory and experimental measurements individual carbon nanotubes (CNTs) have very high values of thermal conductivity. One of the challenges is to achieve high thermal conductivity in macroscopic assemblies of CNTs such as fibres, films and composites, paving the way to a wide range of applications. CNT fibres have tremendous potential in succeeding as the future materials for a variety of applications when properties at the nanoscale are translated to their macroscopic assemblies. In this paper we report the measurements of thermal conductivity of continuously spun CNT fibres and its dependence on temperature. Thermal conductivity measurements were performed using in-house built temperature sensing microscope probe. Specific thermal conductivity of CNT fibres showed an order of magnitude advantage over the traditional materials used for heat dissipation.

  16. Thermal property of insulation material for HTS power cable

    Science.gov (United States)

    Choi, Yeon Suk; Kim, D. L.; Shin, D. W.; Hwang, S. D.

    2012-06-01

    The thermal property of insulation material is essential in developing a high temperature superconductor (HTS) power cable operating at around liquid nitrogen temperature. The accurate estimate of the heat flux is difficult in the nonmetallic materials because nonmetallic materials have a high thermal resistance and low temperature gradient along the specimen. The objective of the present work is to develop a precise instrument for measuring the thermal conductivity of insulating materials over a temperature range of 30 K to approximately the room temperature by using a cryocooler. The thermal conductivity of Teflon is measured and the accuracy confirmation is carried out by comparing published data. In addition, the experimental results of apparent thermal conductivity of polypropylene laminated paper (PPLP) are presented and the temperature dependency is also discussed

  17. Experimental Studies on Thermal and Electrical Properties of Platinum Nanofilms

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xing; ZHANG Qing-Guang; CAO Bing-Yang; FUJII Motoo; TAKAHASHI Koji; IKUTA Tatsuya

    2006-01-01

    @@ We experimentally studied the in-plane thermal and electrical properties of a suspended platinum nanofilm in thickness of 15 nm. The measured results show that the in-plane thermal conductivity, the electrical conductivity and the resistance-temperature coefficient of the studied nanofilm are much less than those of the bulk material,while the Lorenz number is greater than the bulk value.

  18. Thermal Properties of Al-50%Si Alloys

    Institute of Scientific and Technical Information of China (English)

    Akio Nishimoto; Katsuya Akamatsu; Kazuyoshi Nakao; Kazuo Ichii

    2004-01-01

    In order to prepare a hypereutectic Al-Si alloy with low coefficients of thermal expansion (CTE), Al-50was produced by powder metallurgy (P/M) and ingot metallurgy (I/M). P/M specimen was prepared by mechanical alloying(MA) and pulsed electric-current sintering (PECS). The microstructures of specimens were characterized by optical microscopy and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS). Vickers microhardness and CTE measurements were performed. The grains in the P/M specimen were refined with increasing MA time. Primary Si and eutectic Si in the I/M specimen were remarkably refined by adding minute amounts of Sr. The CTE of P/M and I/M specimens were estimated as 7.8×10-6 and 10.7×10-6, respectively. These values were as same as a CTE of Al2O3 ceramics.

  19. Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, Cemil; Sari, Ahmet; Karaipekli, Ali [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey); Uzun, Orhan [Department of Physics, Gaziosmanpasa University, 60240 Tokat (Turkey)

    2009-01-15

    This study is focused on the preparation, characterization, and determination of thermal properties of microencapsulated docosane with polymethylmethacrylate (PMMA) as phase change material for thermal energy storage. Microencapsulation of docosane has been carried out by emulsion polymerization. The microencapsulated phase change material (MEPCM) was characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Thermal properties and thermal stability of MEPCM were measured by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). DSC analysis indicated that the docosane in the microcapsules melts at 41.0 C and crystallizes at 40.6 C. It has latent heats of 54.6 and -48.7 J/g for melting and crystallization, respectively. TGA showed that the MEPCM degraded in three distinguishable steps and had good chemical stability. Accelerated thermal cycling tests also indicated that the MEPCM had good thermal reliability. Based on all these results, it can be concluded that the microencapsulated docosane as MEPCMs have good potential for thermal energy storage purposes such as solar space heating applications. (author)

  20. Some Thermal and Electrical Properties of Candelilla Wax

    OpenAIRE

    2002-01-01

    We report the values of some thermal and electrical properties of Candelilla Wax (euphorbia cerifera). The open-cell photoacoustic technique and another photothermic technique - based on the measure of the temperature decay of a heated sample - were employed to obtain the thermal diffusivity ($\\alpha_{s} = 0.026 \\pm 0.00095 {cm}^{2}{/sec}$) as well as the thermal conductivity ($k=2.132 \\pm 0.16 {W/mK}$) of this wax. The Kelvin null method was used to measure the dark decay of the surface pote...

  1. Comparison of Thermal Properties Measured by Different Methods

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan [Geo Innova AB, Linkoeping (Sweden); Kukkonen, Ilmo [Geological Survey of Finland, Helsinki (Finland); Haelldahl, Lars [Hot Disk AB, Uppsala (Sweden)

    2003-04-01

    A strategy for a thermal site descriptive model of bedrock is under development at SKB. In the model different kinds of uncertainties exist. Some of these uncertainties are related to the potential errors in the methods used for determining thermal properties of rock. In two earlier investigations thermal properties of rock samples were analysed according to the TPS method (transient plane source). Thermal conductivity and thermal diffusivity were determined using the TPS method. For a comparison, the same samples have been measured at the Geological Survey of Finland (GSF), using different laboratory methods. In this later investigation, the thermal conductivity was determined using the divided-bar method and the specific heat capacity using a calorimetric method. The mean differences between the results of different methods are relatively low but the results of individual samples show large variations. The thermal conductivity measured by the divided bar method gives for most samples slightly higher values, in average about 3%, than the TPS method. The specific heat capacity measured by the calorimetric method gives lower values, in average about 2%, than the TPS method. Consequently, the thermal diffusivity calculated from thermal conductivity and specific heat capacity gives higher values, in average about 6%, than the TPS method. Reasons for the differences are estimated mainly to be dependent on differences between the samples, errors in the temperature dependence of specific heat and in the transformation from volumetric to specific heat. The TPS measurements are performed using two pieces (sub-samples) of rock. Only one of these two sub-samples was measured using the divided bar method and the calorimetric method. Further, sample preparation involved changes in the size of some of the samples. The mean differences between the results of different methods are within the margins of error reported by the measuring laboratories. However, systematic errors in

  2. The phonon and thermal properties of a ladder nanostructure

    Directory of Open Access Journals (Sweden)

    M Mardaani

    2011-12-01

    Full Text Available  In this paper, we study the phonon thermal properties of a ladder nanostructure in harmonic approximation. We present a model consisting of two infinite chains with different masses. Then, we investigate the effect of different masses on the phonon spectrum. Moreover, as a specific case, in the absence of the second neighbor interaction, we calculate the phonon density of states/modes. Finally, we consider the thermal conductivity of the system. The results show that the phonon spectrum shifts down to the lower frequencies by increasing the masses. Furthermore, a frequency gap appears in the phonon spectrum. By increasing the springs constants, the thermal conductance decreases.

  3. Mechanical properties and thermal behaviour of LLDPE/MWNTs nanocomposites

    Directory of Open Access Journals (Sweden)

    Tai Jin-hua

    2012-12-01

    Full Text Available Multi-walled carbon nanotubes (MWNTs were incorporated into a linear low-density polyethylene (LLDPE matrix through using screw extrusion and injection technique. The effect of different weight percent loadings of MWNTs on the morphology, mechanical, and thermal of LLDPE/MWNTs nanocomposite had been investigated. It was found that, at low concentration of MWNTs, it could uniformly disperse into a linear low-density polyethylene matrix and provide LLDPE/MWNTs nanocomposites much improved mechanical properties. Thermal analysis showed that a clear improvement of thermal stability for LLDPE/MWNTs nanocomposites increased with increasing MWNTs content.

  4. Thermal properties for the thermal-hydraulics analyses of the BR2 maximum nominal heat flux.

    Energy Technology Data Exchange (ETDEWEB)

    Dionne, B.; Kim, Y. S.; Hofman, G. L. (Nuclear Engineering Division)

    2011-05-23

    This memo describes the assumptions and references used in determining the thermal properties for the various materials used in the BR2 HEU (93% enriched in {sup 235}U) to LEU (19.75% enriched in {sup 235}U) conversion feasibility analysis. More specifically, this memo focuses on the materials contained within the pressure vessel (PV), i.e., the materials that are most relevant to the study of impact of the change of fuel from HEU to LEU. This section is regrouping all of the thermal property tables. Section 2 provides a summary of the thermal properties in form of tables while the following sections present the justification of these values. Section 3 presents a brief background on the approach used to evaluate the thermal properties of the dispersion fuel meat and specific heat capacity. Sections 4 to 7 discuss the material properties for the following materials: (i) aluminum, (ii) dispersion fuel meat (UAlx-Al and U-7Mo-Al), (iii) beryllium, and (iv) stainless steel. Section 8 discusses the impact of irradiation on material properties. Section 9 summarizes the material properties for typical operating temperatures. Appendix A elaborates on how to calculate dispersed phase's volume fraction. Appendix B shows the evolution of the BR2 maximum heat flux with burnup.

  5. Optothermal Raman Studies of Thermal Properties of Graphene Based Films

    Science.gov (United States)

    Malekpour, Hoda

    Efficient thermal management is becoming a critical issue for development of the next generation of electronics. As the size of electronic devices shrinks, the dissipated power density increases, demanding a better heat removal. The discovery of graphene's unique electrical and thermal properties stimulated interest of electronic industry to development of graphene based technologies. In this dissertation, I report the results of my investigation of thermal properties of graphene derivatives and their applications in thermal management. The dissertation consists of three parts. In the first part, I investigated thermal conductivity of graphene laminate films deposited on thermally insulating polyethylene terephthalate substrates. Graphene laminate is made of chemically derived graphene and few layer graphene flakes packed in overlapping structure. Two types of graphene laminate were studied: as deposited and compressed. The thermal conductivity of the laminate was found to be in the range from 40 W/mK to 90 W/mK at room temperature. It was established that the average size and the alignment of graphene flakes are parameters dominating the heat conduction. In the second part of this dissertation, I investigated thermal conductivity of chemically reduced freestanding graphene oxide films. It was found that the in-plane thermal conductivity of graphene oxide can be increased significantly using chemical reduction and temperature treatment. Finally, I studied the effect of defects on thermal conductivity of suspended graphene. The knowledge of the thermal conductivity dependence on the concentration of defects can shed light on the strength of the phonon - point defect scattering in two-dimensional materials. The defects were introduced to graphene in a controllable way using the low-energy electron beam irradiation. It was determined that as the defect density increases the thermal conductivity decreases down to about 400 W/mK, and then reveal saturation type behavior

  6. Thermal Properties of Cement-Based Composites for Geothermal Energy Applications

    Directory of Open Access Journals (Sweden)

    Xiaohua Bao

    2017-04-01

    Full Text Available Geothermal energy piles are a quite recent renewable energy technique where geothermal energy in the foundation of a building is used to transport and store geothermal energy. In this paper, a structural–functional integrated cement-based composite, which can be used for energy piles, was developed using expanded graphite and graphite nanoplatelet-based composite phase change materials (CPCMs. Its mechanical properties, thermal-regulatory performance, and heat of hydration were evaluated. Test results showed that the compressive strength of GNP-Paraffin cement-based composites at 28 days was more than 25 MPa. The flexural strength and density of thermal energy storage cement paste composite decreased with increases in the percentage of CPCM in the cement paste. The infrared thermal image analysis results showed superior thermal control capability of cement based materials with CPCMs. Hence, the carbon-based CPCMs are promising thermal energy storage materials and can be used to improve the durability of energy piles.

  7. Thermal analysis of annular fins with temperature-dependent thermal properties

    Institute of Scientific and Technical Information of China (English)

    I. G. AKSOY

    2013-01-01

    The thermal analysis of the annular rectangular profile fins with variable thermal properties is investigated by using the homotopy analysis method (HAM). The thermal conductivity and heat transfer coefficient are assumed to vary with a linear and power-law function of temperature, respectively. The effects of the thermal-geometric fin parameter and the thermal conductivity parameter variations on the temperature distribution and fin efficiency are investigated for different heat transfer modes. Results from the HAM are compared with numerical results of the finite difference method (FDM). It can be seen that the variation of dimensionless parameters has a significant effect on the temperature distribution and fin efficiency.

  8. Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide

    OpenAIRE

    Strankowski Michał; Piszczyk Łukasz; Kosmela Paulina; Korzeniewski Piotr

    2015-01-01

    In this study, thermally reduced graphene oxide (TRG)-containing polyurethane nanocomposites were obtained by the extrusion method. The content of TRG incorporated into polyurethane elastomer systems equaled 0.5, 1.0, 2.0 and 3.0 wt%. The morphology, static and dynamic mechanical properties, and thermal stability of the modified materials were investigated. The application of TRG resulted in a visible increase in material stiffness as confirmed by the measurements of complex compression modul...

  9. Review on thermal properties of nanofluids: Recent developments.

    Science.gov (United States)

    Angayarkanni, S A; Philip, John

    2015-11-01

    Nanofluids are dispersions of nanomaterials (e.g. nanoparticles, nanofibers, nanotubes, nanowires, nanorods, nanosheet, or droplets) in base fluids. Nanofluids have been a topic of great interest during the last one decade primarily due to the initial reports of anomalous thermal conductivity (k) enhancement in nanofluids with a small percentage of nanoparticles. This field has been quite controversial, with multiple reports of anomalous enhancement in thermal conductivity and many other reports of the thermal conductivity increase within the classical Maxwell mixing model. Several mechanisms have been proposed for explaining the observed enhancement in thermal conductivity. The role of Brownian motion, interfacial resistance, morphology of suspended nanoparticles and aggregating behavior is investigated both experimentally and theoretically. As the understanding of specific heat capacity of nanofluids is a prerequisite for their effective utilization in heat transfer applications, it is also investigated by many researchers. From the initial focus on thermophysical properties of nanofluids, the attention is now shifted to tailoring of novel nanofluids with large thermal conductivities. Further, to overcome the limitations of traditional heat transfer media, phase change materials (PCMs) and hybrid nanofluids are being developed as effective media for thermal energy storage. This review focuses the recent progress in nanofluids research from a heat transfer perspective. Emphasis is given for the latest work on thermal properties of nanofluids, phase change materials and hybrid nanofluids. The preparation of nanofluids by various techniques, methods of stabilization, stability measurement techniques, thermal conductivity and heat capacity studies, proposed mechanisms of heat transport, theoretical models on thermal conductivity, factors influencing k and the effect of nanoinclusions in PCM are discussed in this review. Sufficient background information is also

  10. Thermal Properties of Lunar Regolith Simulants

    Science.gov (United States)

    Street, Kenneth W., Jr.; Ray, Chandra; Rickman, Doug; Scheiman, Daniel A.

    2010-01-01

    Various high temperature chemical processes have been developed to extract oxygen and metals from lunar regolith. These processes are tested using terrestrial analogues of the regolith. But all practical terrestrial analogs contain H2O and/or OH-, the presence of which has substantial impact on important system behaviors. We have undertaken studies of lunar regolith simulants to determine the limits of the simulants to validate key components for human survivability during sustained presence on the Moon. Differential Thermal Analysis (DTA) yields information on phase transitions and melting temperatures. Thermo-Gravimetric Analysis (TGA) with Fourier Transform Infrared (FTIR) analysis provides information on evolved gas species and their evolution temperature profiles. The DTA and TGA studies included JSC-1A fine (Johnson Space Center Mare Type 1A simulant), NU-LHT-2M (National Aeronautics and Space Administration (NASA)-- United States Geological Survey (USGS)--Lunar Highlands Type 2M simulant) and its proposed feedstocks: anorthosite; dunite; high quality (HQ) glass and the norite from which HQ glass is produced. As an example, the DTA and TGA profiles for anorthosite follow. The DTA indicates exothermic transitions at 355 and 490 C and endothermic transitions at 970 and 1235 C. Below the 355 C transition, water is lost accounting for approximately 0.1 percent mass loss. Just above 490 C a second type of water is lost, presumably bound in lattices of secondary minerals along with other volatile oxides. Limited TGA-FTIR data is available at the time of this writing. For JSC-1A fine, the TGA-FTIR indicates at least two kinds of water are evolved in the 100 to 500 and the 700 to 900 C ranges. Evolution of carbon dioxide types occurs in the 250 to 545, 545 to 705, and 705 to 985 C ranges. Geologically, the results are consistent with the evolution of "water" in its several forms, CO2 from break down of secondary carbonates and magmatic, dissolved gas and glass

  11. Thermal properties of soils: effect of biochar application

    Science.gov (United States)

    Usowicz, Boguslaw; Lukowski, Mateusz; Lipiec, Jerzy

    2014-05-01

    Thermal properties (thermal conductivity, heat capacity and thermal diffusivity) have a significant effect on the soil surface energy partitioning and resulting in the temperature distribution. Thermal properties of soil depend on water content, bulk density and organic matter content. An important source of organic matter is biochar. Biochar as a material is defined as: "charcoal for application as a soil conditioner". Biochar is generally associated with co-produced end products of pyrolysis. Many different materials are used as biomass feedstock for biochar, including wood, crop residues and manures. Additional predictions were done for terra preta soil (also known as "Amazonian dark earth"), high in charcoal content, due to adding a mixture of charcoal, bone, and manure for thousands of years i.e. approximately 10-1,000 times longer than residence times of most soil organic matter. The effect of biochar obtained from the wood biomass and other organic amendments (peat, compost) on soil thermal properties is presented in this paper. The results were compared with wetland soils of different organic matter content. The measurements of the thermal properties at various water contents were performed after incubation, under laboratory conditions using KD2Pro, Decagon Devices. The measured data were compared with predictions made using Usowicz statistical-physical model (Usowicz et al., 2006) for biochar, mineral soil and soil with addition of biochar at various water contents and bulk densities. The model operates statistically by probability of occurrence of contacts between particular fractional compounds. It combines physical properties, specific to particular compounds, into one apparent conductance specific to the mixture. The results revealed that addition of the biochar and other organic amendments into the soil caused considerable reduction of the thermal conductivity and diffusivity. The mineral soil showed the highest thermal conductivity and diffusivity

  12. Electronic and thermal properties of Biphenyl molecules

    Science.gov (United States)

    Medina, F. G.; Ojeda, J. H.; Duque, C. A.; Laroze, D.

    2015-11-01

    Transport properties of a single Biphenyl molecule coupled to two contacts are studied. We characterise this system by a tight-binding Hamiltonian. Based on the non-equilibrium Green's functions technique with a Landauer-Büttiker formalism the transmission probability, current and thermoelectrical power are obtained. We show that the Biphenyl molecule may have semiconductor behavior for certain values of the electrode-molecule-electrode junctions and different values of the angle between the two rings of the molecule. In addition, the density of states (DOS) is calculated to compare the bandwidths with the profile of the transmission probability. DOS allows us to explain the asymmetric shape with respect to the molecule's Fermi energy.

  13. Thermal properties. Site descriptive modelling Forsmark - stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Wrafter, John; Sundberg, Jan [Geo Innova AB (Sweden); Rosen, L ars [Sweco Viak AB (Sweden)

    2007-09-15

    The lithological data acquired from boreholes and mapping of the rock surface need to be reclassified into thermal rock classes, TRCs. The main reason is to simplify the simulations. The lithological data are used to construct models of the transition between different TRCs, thus describing the spatial statistical structure of each TRC. The result is a set of transition probability models that are used in the simulation of TRCs. The intermediate result of this first stochastic simulation is a number of realisations of the geology, each one equally probable. Based on the thermal data, a spatial statistical thermal model is constructed for each TRC. It consists of a statistical distribution and a variogram for each TRC. These are used in the stochastic simulation of thermal conductivity and the result is a number of equally probable realisations of thermal conductivity for the domain. In the next step, the realisations of TRCs (lithology) and thermal conductivity are merged, i.e. each realisation of geology is filled with simulated thermal conductivity values. The result is a set of realisations of thermal conductivity that considers both the difference in thermal properties between different TRCs, and the variability within each TRC. If the result is desired in a scale different from the simulation scale, i.e. the canister scale, upscaling of the realisations can be performed. The result is a set of equally probable realisations of thermal properties. The presented methodology was applied to rock domain RFM029 and RFM045. The main results are sets of realisations of thermal properties that can be used for further processing, most importantly for statistical analysis and numerical temperature simulations for the design of repository layout (distances between deposition holes). The main conclusions of the thermal modelling are: The choice of scale has a profound influence on the distribution of thermal conductivity values. The variance decreases and the lower tail

  14. Effect of temperature on thermal properties of Graphene

    Directory of Open Access Journals (Sweden)

    Neetu Sorot

    2015-09-01

    Full Text Available Home About Us » Editorial Board Indexed in Current Issue Coming Issue Archives Submission » Contact Us Effect of temperature on thermal properties of Graphene Volume 31, Number 3 Neetu Sorot and B. R. K.Gupta* Department of physics GLA University, Mathura-U.P. (India . Correspondence Author Email : brk.gupta@gla.ac.in DOI : http://dx.doi.org/10.13005/ojc/310309 ABSTRACT: Many potential applications of graphene in nanotechnology depend on its thermo-mechanical stability. We have calculated the temperature dependent properties such as the volume thermal expansion, and thermal expansion coefficient of the graphene using the equation of state (EOS based on thermodynamic variables. A simple theoretical method is applied to determine the thermal expansion and thermal expansion properties of graphene. The model employed in the present study consists of only two input parameters and independent of potential. The results achieved as reported in this paper are found in good agreement with those obtained from QHA-GGA ab- initio study [25].

  15. Cellular and Porous Materials Thermal Properties Simulation and Prediction

    CERN Document Server

    Öchsner, Andreas; de Lemos, Marcelo J S

    2008-01-01

    Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.

  16. Effect of amorphisation on the thermal properties of nanostructured membranes

    Energy Technology Data Exchange (ETDEWEB)

    Termentzidis, Konstantinos; Verdier, Maxime; Lacroix, David [CNRS, LEMTA, UMR 7563, Vandoeuvre les Nancy (France); Lorraine Univ., Vandoeuvre les Nancy (France). LEMTA UMR 7563

    2017-05-01

    The majority of the silicon devices contain amorphous phase and amorphous/crystalline interfaces which both considerably affect the transport of energy carriers as phonons and electrons. In this article, we investigate the impact of amorphous phases (both amorphous silicon and amorphous SiO{sub 2}) of silicon nanoporous membranes on their thermal properties via molecular dynamics simulations. We show that a small fraction of amorphous phase reduces dramatically the thermal transport. One can even create nanostructured materials with subamorphous thermal conductivity, while keeping an important crystalline fraction. In general, the a-SiO{sub 2} shell around the pores reduces the thermal conductivity by a factor of five to ten compared to a-Si shell. The phonon density of states for several systems is also given to give the impact of the amorphisation on the phonon modes.

  17. Effect of Amorphisation on the Thermal Properties of Nanostructured Membranes

    Science.gov (United States)

    Termentzidis, Konstantinos; Verdier, Maxime; Lacroix, David

    2017-02-01

    The majority of the silicon devices contain amorphous phase and amorphous/crystalline interfaces which both considerably affect the transport of energy carriers as phonons and electrons. In this article, we investigate the impact of amorphous phases (both amorphous silicon and amorphous SiO2) of silicon nanoporous membranes on their thermal properties via molecular dynamics simulations. We show that a small fraction of amorphous phase reduces dramatically the thermal transport. One can even create nanostructured materials with subamorphous thermal conductivity, while keeping an important crystalline fraction. In general, the a-SiO2 shell around the pores reduces the thermal conductivity by a factor of five to ten compared to a-Si shell. The phonon density of states for several systems is also given to give the impact of the amorphisation on the phonon modes.

  18. Thermal properties of solids at room and cryogenic temperatures

    CERN Document Server

    Ventura, Guglielmo

    2014-01-01

    This book is a guide for materials scientists, physicists, chemists and engineers who wish to explore the field of low-temperature material properties. The focus is on heat capacity, thermal expansion and electrical and thermal conductivity. The authors report a wide range of experimental details and data, and have compiled useful tables of low-temperature data. Each chapter of the book starts by addressing the theoretical basis of the phenomena. This is a concise presentation, but it helps the reader to develop a deeper understanding of the experiments. The second part of the chapters is dedicated to describing the main experimental techniques to measure thermal properties at low and very low temperature ranges. The final part of each chapter provides a wealth of relevant experimental data in the form of tables and graphs.

  19. Experimental determination of thermal properties of alluvial soil

    Science.gov (United States)

    Kulkarni, N. G.; Bhandarkar, U. V.; Puranik, B. P.; Rao, A. B.

    2016-12-01

    In the present work, thermal conductivity and specific heat of a particular type of alluvial soil used in brick making in a certain region of India (Karad, Maharashtra State) are experimentally determined for later use in the estimation of ground heat loss in clamp type kilns. These properties are determined simultaneously using the steady-state and the transient temperature data measured in the setup constructed for this purpose. Additionally, physical properties of the soil are experimentally determined for use with six models for the prediction of the thermal conductivity of soil. The predictions from the models are compared with the experimental data. A separate data fitting exercise revealed a small temperature dependence of the soil thermal conductivity on the soil mean temperature.

  20. Phase diagram and thermal properties of strong-interaction matter

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Fei; Chen, Jing; Liu, Yu-Xin; Qin, Si-Xue; Roberts, Craig D.; Schmidt, Sebastian M.

    2016-05-20

    We introduce a novel method for computing the (μ, T)-dependent pressure in continuum QCD, from which we obtain a complex phase diagram and predictions for thermal properties of the dressed-quark component of the system, providing the in-medium behavior of the related trace anomaly, speed of sound, latent heat, and heat capacity.

  1. Marine Aerosol Properties and Thermal Imager Performance (MAPTIP): Synopsis

    NARCIS (Netherlands)

    Leeuw, G. de; Eijk, A.M.J. van; Jensen, D.R.

    1996-01-01

    The MAPTIP (Marine Aerosol Properties and Thermal Imager Performance) experiment was organised as part of a project to assess atmospheric effects on the performance of electro-optical sensor systems in coastal areas. The main issue was the detection and identification of targets. The experiment took

  2. Marine Aerosol Properties and Thermal Imager Performance (MAPTIP): Synopsis

    NARCIS (Netherlands)

    Leeuw, G. de; Eijk, A.M.J. van; Jensen, D.R.

    1996-01-01

    The MAPTIP (Marine Aerosol Properties and Thermal Imager Performance) experiment was organised as part of a project to assess atmospheric effects on the performance of electro-optical sensor systems in coastal areas. The main issue was the detection and identification of targets. The experiment took

  3. Thermal and Electrical Properties of Electrides

    Science.gov (United States)

    Moeggenborg, Kevin James

    1990-01-01

    A method to determine the stability and decomposition kinetics of electrides was developed. The method uses DSC and was applied to two electrides. A sample of Li ^+(PMPCY)e^- underwent a first-order decomposition reaction with a half life of 110 hrs at 23^circC while a sample of K^+(C222)e ^- decomposed autocatalytically in under 2 days at -57^circ C. The results point to two different mechanisms of decomposition in electrides. The electrical properties of several electrides were investigated through Impedance Spectroscopy and a.c. and d.c. conductivity methods. D.C. conductivity studies of K^+(C222)e^- indicated a low band gap but high apparent resistivity and marked non-Ohmic behavior for the compound. The high resistivity and non-Ohmic behavior were found to be due to a Schottky barrier at the sample-electrode interface. Four probe a.c. conductivity experiments on a cylindrical sample pellet revealed a band gap of 0.086 eV for the compound and placed an upper limit of 0.189 Omega cm at 130 K on its resistivity. The band gap of the compound may be due to the activated transfer of electrons across grain boundaries in the polycrystalline samples. The electrides Cs^+(15C5) _2e^- and Cs^+(18C6)_2e ^- were shown to exhibit the first ionic conductivity ever seen in electrides. Cs ^+(15C5)_2e ^- undergoes a transition from defect electronic conductivity to ionic conductivity, the latter having an activation energy of 0.7 eV. Cs^+(18C6) _2e^- also exhibited ionic conduction with an activation energy of 1.0 eV. Both compounds exhibited electrochemical cell behavior when placed between one cesium and one stainless steel electrode. The mechanism of the ionic conductivity may involve the release of the cesium cation from its crown ether cage and its reduction by an electron anion of the compound followed by Cs^+ transfer between anionic sites in the crystal lattice. The semiconductor behavior previously seen in Cs^+(18C6) _2e^- was shown to be due to the doping of the

  4. Optical and thermal properties of nasal septal cartilage.

    Science.gov (United States)

    Youn, J I; Telenkov, S A; Kim, E; Bhavaraju, N C; Wong, B J; Valvano, J W; Milner, T E

    2000-01-01

    The aim of the study was to measure the spectral dependence of optical absorption and reduced scattering coefficients and thermal conductivity and diffusivity of porcine nasal septal cartilage. Values of optical and thermal properties determined in this study may aid in determining laser dosimetry and allow selection of an optical source wavelength for noninvasive diagnostics for laser-assisted reshaping of cartilage. The diffuse reflectance and transmittance of ex vivo porcine nasal septal cartilage were measured in the 400- to 1,400-nm spectral range by using a spectrophotometer. The reflectance and transmittance data were analyzed by using an inverse adding-doubling algorithm to obtain the absorption (mu(a)) and reduced scattering (mu(a)') coefficients. A multichannel thermal probe controller system and infrared imaging radiometer methods were applied to measure the thermal properties of cartilage. The multichannel thermal probe controller system was used as an invasive technique to measure thermal conductivity and diffusivity of cartilage at three temperatures (27, 37, 50 degrees C). An infrared imaging radiometer was used as a noninvasive method to measure the thermal diffusivity of cartilage by using a CO(2) laser source (lambda = 10.6 microm) and an infrared focal plane array (IR-FPA) camera. The optical absorption peaks at 980 nm and 1,180 nm in cartilage were observed and corresponded to known absorption bands of water. The determined reduced scattering coefficient gradually decreased at longer wavelengths. The thermal conductivity values of cartilage measured by using an invasive probe at 27, 37, and 50 degrees C were 4.78, 5.18, and 5.76 mW/cm degrees C, respectively. The corresponding thermal diffusivity values were 1.28, 1.31, and 1.40x 10(-3) cm(2)/sec. Because no statistically significant difference in thermal diffusivity values with increasing temperature is found, the average thermal diffusivity is 1.32 x 10(-3) cm(2)/sec. The numerical estimate

  5. Glass-forming property of hydroxyectoine is the cause of its superior function as a desiccation protectant

    Science.gov (United States)

    Tanne, Christoph; Golovina, Elena A.; Hoekstra, Folkert A.; Meffert, Andrea; Galinski, Erwin A.

    2014-01-01

    We were able to demonstrate that hydroxyectoine, in contrast to ectoine, is a good glass-forming compound. Fourier transform infrared and spin label electron spin resonance studies of dry ectoine and hydroxyectoine have shown that the superior glass-forming properties of hydroxyectoine result from stronger intermolecular H-bonds with the OH group of hydroxyectoine. Spin probe experiments have also shown that better molecular immobilization in dry hydroxyectoine provides better redox stability of the molecules embedded in this dry matrix. With a glass transition temperature of 87°C (vs. 47°C for ectoine) hydroxyectoine displays remarkable desiccation protection properties, on a par with sucrose and trehalose. This explains its accumulation in response to increased salinity and elevated temperature by halophiles such as Halomonas elongata and its successful application in ``anhydrobiotic engineering'' of both enzymes and whole cells. PMID:24772110

  6. Glass-forming property of hydroxyectoine is the cause of its superior function as a desiccation protectant

    Directory of Open Access Journals (Sweden)

    Erwin Arno Galinski

    2014-04-01

    Full Text Available We were able to demonstrate that hydroxyectoine, in contrast to ectoine, is a good glass-forming compound. Fourier transform infrared (FTIR and spin label electron spin resonance (ESR studies of dry ectoine and hydroxyectoine have shown that the superior glass-forming properties of hydroxyectoine result from stronger intermolecular H-bonds with the OH group of hydroxyectoine. Spin probe experiments have also shown that better molecular immobilization in dry hydroxyectoine provides better redox stability of the molecules embedded in this dry matrix. With a glass transition temperature of 87 0C (vs. 47 0C for ectoine hydroxyectoine displays remarkable desiccation protection properties, on a par with sucrose and trehalose. This explains its accumulation in response to increased salinity and elevated temperature by halophiles such as Halomonas elongata and its successful application in anhydrobiotic engineering of both enzymes and whole cells.

  7. Thermal Properties of Oxides With Magnetoplumbite Structure for Advanced Thermal Barrier Coatings

    Science.gov (United States)

    Bansal, Narottam P.; Zhu, Dongming; Eslamloo-Grami, Maryam

    2007-01-01

    Oxides having magnetoplumbite structure are promising candidate materials for applications as high temperature thermal barrier coatings because of their high thermal stability, high thermal expansion, and low thermal conductivity. In this study, powders of LaMgAl11O19, GdMgAl11O19, SmMgAl11O19, and Gd0.7Yb0.3MgAl11O19 magnetoplumbite oxides were synthesized by citric acid sol-gel method and hot pressed into disk specimens. The thermal expansion coefficients (CTE) of these oxide materials were measured from room temperature to 1500 C. The average CTE value was found to be approx.9.6x10(exp -6)/C. Thermal conductivity of these magnetoplumbite-based oxide materials was also evaluated using steady-state laser heat flux test method. The effects of doping on thermal properties were also examined. Thermal conductivity of the doped Gd0.7Yb0.3MgAl11O19 composition was found to be lower than that of the undoped GdMgAl11O19. In contrast, thermal expansion coefficient was found to be independent of the oxide composition and appears to be controlled by the magnetoplumbite crystal structure. Thermal conductivity testing of LaMgAl11O19 and LaMnAl11O19 magnetoplumbite oxide coatings plasma sprayed on NiCrAlY/Rene N5 superalloy substrates indicated resistance of these coatings to sintering even at temperatures as high as 1600 C.

  8. Synthesis of High-Quality α-MnSe Nanostructures with Superior Lithium Storage Properties.

    Science.gov (United States)

    Li, Na; Zhang, Yi; Zhao, Hongyang; Liu, Zhengqing; Zhang, Xinyu; Du, Yaping

    2016-03-21

    High-quality α-MnSe nanocubes were successfully prepared for the first time by an effective hot injection synthesis strategy. This approach was simple but robust and had been applied to the controllable synthesis of different sizes and diverse morphologies of α-MnSe nanostructures. The crystal phases, compositions, and microstructures of these nanostructures had been systematically characterized with a series of techniques. As a proof-of-concept application, the as-prepared α-MnSe nanocubes were used as an anode material for a lithium ion battery, which exhibited superior rate ability and ultralong cycle stability in half-cell and full-cell tests. Importantly, the phase transition from α-MnSe to β-MnSe during the electrochemical process was proved by ex situ X-ray diffraction and selected area electron diffraction. The excellent electrochemical performance of α-MnSe endowed its potential as an anode material candidate for high performance lithium storage.

  9. Superior austempered ductile iron (ADI) properties achieved by prior hot isostatic pressing (HIP)

    Energy Technology Data Exchange (ETDEWEB)

    LaGoy, J.L.; Widmer, R.; Zick, D.H. [Industrial Materials Technology Inc., Andover, MA (United States)

    1996-12-31

    Ductile iron obtained from different foundries and cast by dissimilar methods has been successfully hot isostatically pressed (HIPed) before austempering to achieve substantially higher ductilities, without significant detriment to other properties, than those reached by austempering along. HIP was attempted to solve different mechanical deficiencies in austempered ductile iron (ADI) such as the lack of ductility in higher strength grades, inconsistent mechanical properties, and service life limitations. A variety of HIP temperatures were analyzed from near the austenitizing region up to within 56 C (100 F) of the melting point of ductile iron. Microporosity was eliminated by HIP at all temperatures, and subsequent austempering revealed a uniform ADI microstructure. HIP proved successful with both unencapsulated castings and those enclosed within steel canisters. Additional benefits caused by HIP processing of ductile iron castings without the austempering treatment include a significant decrease in mechanical property data scatter, high hardness at reasonable ductility levels, and a substantially reduced scrap rate.

  10. Electronic and Thermal Properties of Graphene and Carbon Structures

    Science.gov (United States)

    Anthony, Gilmore; Khatun, Mahfuza

    2011-10-01

    We will present the general properties of carbon structures. The research involves the study of carbon structures: Graphene, Graphene nanoribbons (GNRs), and Carbon Nanotubes (CNTs). A review of electrical and thermal conduction phenomena of the structures will be discussed. Particularly carbon nanoribbons and CNTs have many interesting physical properties, and have the potential for device applications. Our research interests include the study of electronic structures, electrical and thermal transport properties of the carbon structures. Results are produced analytically as well as by simulation. The numerical simulations are conducted using various tools such as Visual Molecular Dynamics (VMD), Large Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS), NanoHub at Purdue University and the Beowulf Cluster at Ball State University.

  11. Thermal properties of carbon black aqueous nanofluids for solar absorption

    Directory of Open Access Journals (Sweden)

    Han Dongxiao

    2011-01-01

    Full Text Available Abstract In this article, carbon black nanofluids were prepared by dispersing the pretreated carbon black powder into distilled water. The size and morphology of the nanoparticles were explored. The photothermal properties, optical properties, rheological behaviors, and thermal conductivities of the nanofluids were also investigated. The results showed that the nanofluids of high-volume fraction had better photothermal properties. Both carbon black powder and nanofluids had good absorption in the whole wavelength ranging from 200 to 2,500 nm. The nanofluids exhibited a shear thinning behavior. The shear viscosity increased with the increasing volume fraction and decreased with the increasing temperature at the same shear rate. The thermal conductivity of carbon black nanofluids increased with the increase of volume fraction and temperature. Carbon black nanofluids had good absorption ability of solar energy and can effectively enhance the solar absorption efficiency.

  12. Thermal properties of carbon black aqueous nanofluids for solar absorption.

    Science.gov (United States)

    Han, Dongxiao; Meng, Zhaoguo; Wu, Daxiong; Zhang, Canying; Zhu, Haitao

    2011-07-18

    In this article, carbon black nanofluids were prepared by dispersing the pretreated carbon black powder into distilled water. The size and morphology of the nanoparticles were explored. The photothermal properties, optical properties, rheological behaviors, and thermal conductivities of the nanofluids were also investigated. The results showed that the nanofluids of high-volume fraction had better photothermal properties. Both carbon black powder and nanofluids had good absorption in the whole wavelength ranging from 200 to 2,500 nm. The nanofluids exhibited a shear thinning behavior. The shear viscosity increased with the increasing volume fraction and decreased with the increasing temperature at the same shear rate. The thermal conductivity of carbon black nanofluids increased with the increase of volume fraction and temperature. Carbon black nanofluids had good absorption ability of solar energy and can effectively enhance the solar absorption efficiency.

  13. Thermal properties of carbon black aqueous nanofluids for solar absorption

    Science.gov (United States)

    Han, Dongxiao; Meng, Zhaoguo; Wu, Daxiong; Zhang, Canying; Zhu, Haitao

    2011-07-01

    In this article, carbon black nanofluids were prepared by dispersing the pretreated carbon black powder into distilled water. The size and morphology of the nanoparticles were explored. The photothermal properties, optical properties, rheological behaviors, and thermal conductivities of the nanofluids were also investigated. The results showed that the nanofluids of high-volume fraction had better photothermal properties. Both carbon black powder and nanofluids had good absorption in the whole wavelength ranging from 200 to 2,500 nm. The nanofluids exhibited a shear thinning behavior. The shear viscosity increased with the increasing volume fraction and decreased with the increasing temperature at the same shear rate. The thermal conductivity of carbon black nanofluids increased with the increase of volume fraction and temperature. Carbon black nanofluids had good absorption ability of solar energy and can effectively enhance the solar absorption efficiency.

  14. Determining the thermal and physicals properties of oil processing products

    Directory of Open Access Journals (Sweden)

    Viktoria I. Kryvda

    2015-03-01

    Full Text Available In the last decades both technological process’ improvement and primary energy resources saving are the main tasks of oil refineries. Using various oil products does impose an accurate knowledge of their properties. The dispersion analysis applied makes possible to construct a model simulating the primary oil refining products’ and raw materials’ thermal physical properties. As a result of data approximation there were obtained polynomials with coefficients differing from attributable to the studied oil products fractions. The research represents graphic dependences of thermal physical properties on temperature values for diesel oil fraction. The linear character of density and calorific capacity dependencies from temperature is represented with a proportional error in calculations. The relative minimum error is below 2% that confirms the implemented calculations’ adequacy. The resulting model can be used in calculations for further technological process improvements.

  15. Characterization of thermal properties of municipal solid waste landfills.

    Science.gov (United States)

    Faitli, József; Magyar, Tamás; Erdélyi, Attila; Murányi, Attila

    2015-02-01

    Municipal waste landfills represent not only a source of landfill gases, but a source of thermal energy as well. The heat in landfills is generated by physical, chemical and microbiological processes. The goal of our study was to characterize the thermal properties of municipal solid waste (MSW) samples of the given landfill. A new apparatus was designed and constructed to measure heat flow. A systematic test series of 17 discrete measurements was carried out with municipal waste samples of 1.0-1.7 m(3). The thermal conductivity, heat diffusivity and specific heat capacity of the samples were determined. Analysing the results of the sampling and our experiments it was realized that the theoretical fundaments should be clarified. Two theories were developed for the serial and for the parallel heat flow in three phase disperse systems. The serial and parallel models resulted in different theoretical estimations. The measured thermal conductivity and heat diffusivity were better characterized by the parallel heat flow estimations. The results show that heat can flow parallel in solid, liquid and gas phases. Characterization of thermal properties serves to establish the fundament of heat extraction from municipal waste landfills.

  16. Fabrication, characterization, and thermal property evaluation of silver nanofluids.

    Science.gov (United States)

    Noroozi, Monir; Radiman, Shahidan; Zakaria, Azmi; Soltaninejad, Sepideh

    2014-01-01

    Silver nanoparticles were successfully prepared in two different solvents using a microwave heating technique, with various irradiation times. The silver nanoparticles were dispersed in polar liquids (distilled water and ethylene glycol) without any other reducing agent, in the presence of the stabilizer polyvinylpyrrolidone (PVP). The optical properties, thermal properties, and morphology of the synthesized silver particles were characterized using ultraviolet-visible spectroscopy, photopyroelectric technique, and transmission electron microscopy. It was found that for the both solvents, the effect of microwave irradiation was mainly on the particles distribution, rather than the size, which enabled to make stable and homogeneous silver nanofluids. The individual spherical nanostructure of self-assembled nanoparticles has been formed during microwave irradiation. Ethylene glycol solution, due to its special properties, such as high dielectric loss, high molecular weight, and high boiling point, can serve as a good solvent for microwave heating and is found to be a more suitable medium than the distilled water. A photopyroelectric technique was carried out to measure thermal diffusivity of the samples. The precision and accuracy of this technique was established by comparing the measured thermal diffusivity of the distilled water and ethylene glycol with values reported in the literature. The thermal diffusivity ratio of the silver nanofluids increased up to 1.15 and 1.25 for distilled water and ethylene glycol, respectively.

  17. Enhancement in thermal and mechanical properties of bricks

    Directory of Open Access Journals (Sweden)

    Shibib Khalid S.

    2013-01-01

    Full Text Available A new type of porous brick is proposed. Sawdust is initially well mixed with wet clay in order to create voids inside the brick during the firing process. The voids will enhance the total performance of the brick due to the reduction of its density and thermal conductivity and a minor reduction of its compressive stress. All these properties have been measured experimentally and good performance has been obtained. Although a minor reduction in compressive stress has been observed with increased porosity, this property has still been larger than that of the common used hollow brick. Data obtained by this work lead to a new type of effective brick having a good performance with no possibility that mortar enters inside the holes which is the case with the common used hollow bricks. The mortar has a determent effect on thermal properties of the wall since it has some higher thermal conductivity and density than that of brick which increases the wall overall density and thermal conductivity of the wall.

  18. Thermal properties of flax fiber scoured by different methods

    Directory of Open Access Journals (Sweden)

    Zheng Dong

    2015-01-01

    Full Text Available Thermal properties of flax roves untreated and treated were characterized by differential scanning calorimetry (DSC and thermal gravity analyzer (TGA in order to understand their thermal behavior in more detail and to evaluate the effect of scouring processing on the thermal behavior. Flax roves were treated with six kinds of methods including biological scouring, one bath, two bath, bleaching, alkali scouring and industry chemical scouring as standards. Results showed that all treatments improved thermal stability of flax roves. The results indicated that glass transition temperature (Tg decreased after scouring besides the sample by directly bleaching. It is more difficult to determine the endothermic peak of flax treated by chemical scouring in industry because it takes a very flat course. A distinct endothermic peak was observed for the untreated flax rove, while a distinct exothermic peak in different temperature interval was revealed for other four treated flax rove samples. For TGA analysis, thermal degradation of flax roves studied consists of three regions of the initial, main, and char decomposition, and the third stage consists of secondary weight loss and carbonization for flax roves with biological scouring, one-bath and two-bath. Besides, different residue left indicates that the bio-scoured flax roves are lost with volatile products and does not contribute to char formation. These results provide valuable preferences for mechanism and top value added application of bio-scouring in flax roves.

  19. Thermal Properties of Foundry Mould Made of Used Green Sand

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2016-03-01

    Full Text Available The paper presents results of measuring heat diffusivity and thermal conductivity coefficients of used green foundry sand in temperature range ambient − 600 °C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements of the mould temperature field during the solidification of the casting, the temperature relationships of the measured properties were evaluated. It was confirmed that the obtained relationships are complex and that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured and solidified casting.

  20. High Temperature Thermal Properties of Bentonite Foundry Sand

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2015-06-01

    Full Text Available The paper presents results of measuring thermal conductivity and heat capacity of bentonite foundry sand in temperature range ambient - 900­­°C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements of the mould temperature field during the solidification of the casting, the temperature relationships of the measured properties were evaluated. It was confirmed that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured casting.

  1. Local thermal properties of the surface of Vesta

    Science.gov (United States)

    Capria, M. T.; Tosi, F.; Capaccioni, F.; De Sanctis, M. C.; Palomba, E.; Ammannito, E.; Carraro, F.; Fonte, S.; Titus, T. N.; Combe, J.-P.; Toplis, M.; Sunshine, J.; Fulchignoni, M.; Russel, C. T.; Raymond, C. A.

    2012-04-01

    Temperature information has been obtained from the Dawn/VIR (Visible InfraRed imaging spectrometer) spectra acquired during the Vesta campaign. When combined with a thermophysical model, these temperatures can be used to derive surface thermal properties. Thermal properties are sensitive to several physical characteristics of the surface that are not all spatially resolved. Thus, the derivation of surface temperatures and thermal inertia can lead to the characterization of surface and sub-surface properties of Vesta and the determination of regolith properties. The model we are using solves the heat conduction equation and provide the temperature as a function of thermal conductivity, albedo, emissivity, density and specific heat. The model is applied to the actual shape of Vesta: for any given location, characterized by a well-defined illumination condition and a given UTC time to compute the thermal inertia that results in model temperatures providing a best-fit to surface temperatures as retrieved by VIR. The model has been already applied to the first Vesta full-disk data to derive the global average thermal inertia of Vesta. The values obtained are typical of fine-grained, unconsolidated materials (i.e. dust) and suggest a surface in which a dust layer is wide-spread on coarser regolith. The model is now being applied on small regions of the surface of Vesta. Specific regions are selected because they are interesting for some reason or appear different from the surroundings, such as, for example, dark and bright spots and other peculiar features. Given a location, the thermophysical code is applied until the obtained temperatures are matching (best-fit techniques are used) the temperatures derived from the VIR spectra. The thermal inertia, thermal conductivity, albedo and roughness values are then assumed to be characterizing the location under analysis. The results of the model must be carefully checked and interpreted by taking into account the context (from

  2. Thermal and Thermoelectric Properties of Nanostructured Materials and Interfaces

    Science.gov (United States)

    Liao, Hao-Hsiang

    Many modern technologies are enabled by the use of thin films and/or nanostructured composite materials. For example, many thermoelectric devices, solar cells, power electronics, thermal barrier coatings, and hard disk drives contain nanostructured materials where the thermal conductivity of the material is a critical parameter for the device performance. At the nanoscale, the mean free path and wavelength of heat carriers may become comparable to or smaller than the size of a nanostructured material and/or device. For nanostructured materials made from semiconductors and insulators, the additional phonon scattering mechanisms associated with the high density of interfaces and boundaries introduces additional resistances that can significantly change the thermal conductivity of the material as compared to a macroscale counterpart. Thus, better understanding and control of nanoscale heat conduction in solids is important scientifically and for the engineering applications mentioned above. In this dissertation, I discuss my work in two areas dealing with nanoscale thermal transport: (1) I describe my development and advancement of important thermal characterization tools for measurements of thermal and thermoelectric properties of a variety of materials from thin films to nanostructured bulk systems, and (2) I discuss my measurements on several materials systems done with these characterization tools. First, I describe the development, assembly, and modification of a time-domain thermoreflectance (TDTR) system that we use to measure the thermal conductivity and the interface thermal conductance of a variety of samples including nanocrystalline alloys of Ni-Fe and Co-P, bulk metallic glasses, and other thin films. Next, a unique thermoelectric measurement system was designed and assembled for measurements of electrical resistivity and thermopower of thermoelectric materials in the temperature range of 20 to 350 °C. Finally, a commercial Anter Flashline 3000 thermal

  3. Thermal properties of poly(3-hydroxybutyrate)/vegetable fiber composites

    Science.gov (United States)

    Vitorino, Maria B. C.; Reul, Lízzia T. A.; Carvalho, Laura H.; Canedo, Eduardo L.

    2015-05-01

    The present work studies the thermal properties of composites of poly(3-hydroxybutyrate) (PHB) - a fully biodegradable semi-crystalline thermo-plastic obtained from renewable resources through low-impact biotechno-logical process, biocompatible and non-toxic - and vegetable fiber from the fruit (coconut) of babassu palm tree. PHB is a highly crystalline resin and this characteristic leads to suboptimal properties in some cases. Consequently, thermal properties, in particular those associated with the crystallization of the matrix, are important to judge the suitability of the compounds for specific applications. PHB/babassu composites with 0-50% load were prepared in an internal mixer. Two different types of babassu fibers with two different particle size ranges were compounded with PHB and test specimens molded by compression. Melting and crystallization behavior were studied by differential scanning calorimetry (DSC) at heating/cooling rates between 2 and 30°C/min. Several parameters, including melting point, crystallization temperature, crystallinity, and rate of crystallization, were estimated as functions of load and heating/cooling rates. Results indicate that fibers do not affect the melting process, but facilitate crystallization from the melt. Crystallization temperatures are 30 to 40°C higher for the compounds compared with the neat resin. However, the amount of fiber added has little effect on crystallinity and the degree of crystallinity is hardly affected by the load. Fiber type and initial particle size do not have a significant effect on thermal properties.

  4. Linking express saccade occurance to stimulus properties and sensorimotor integration in the superior colliculus.

    Science.gov (United States)

    Marino, Robert A; Levy, Ron; Munoz, Douglas P

    2015-08-01

    Express saccades represent the fastest possible eye movements to visual targets with reaction times that approach minimum sensory-motor conduction delays. Previous work in monkeys has identified two specific neural signals in the superior colliculus (SC: a midbrain sensorimotor integration structure involved in gaze control) that are required to execute express saccades: 1) previsual activity consisting of a low-frequency increase in action potentials in sensory-motor neurons immediately before the arrival of a visual response; and 2) a transient visual-sensory response consisting of a high-frequency burst of action potentials in visually responsive neurons resulting from the appearance of a visual target stimulus. To better understand how these two neural signals interact to produce express saccades, we manipulated the arrival time and magnitude of visual responses in the SC by altering target luminance and we examined the corresponding influences on SC activity and express saccade generation. We recorded from saccade neurons with visual-, motor-, and previsual-related activity in the SC of monkeys performing the gap saccade task while target luminance was systematically varied between 0.001 and 42.5 cd/m(2) against a black background (∼0.0001 cd/m(2)). Our results demonstrated that 1) express saccade latencies were linked directly to the arrival time in the SC of visual responses produced by abruptly appearing visual stimuli; 2) express saccades were generated toward both dim and bright targets whenever sufficient previsual activity was present; and 3) target luminance altered the likelihood of producing an express saccade. When an express saccade was generated, visuomotor neurons increased their activity immediately before the arrival of the visual response in the SC and saccade initiation. Furthermore, the visual and motor responses of visuomotor neurons merged into a single burst of action potentials, while the visual response of visual-only neurons was

  5. High sensitivity measurements of thermal properties of textile fabrics

    CERN Document Server

    Romeli, D; Esposito, S; Rosace, G; Salesi, G

    2013-01-01

    A new testing apparatus is proposed to measure the thermal properties of fabrics made from polymeric materials. The calibration of the apparatus and the data acquisition procedure are considered in detail in order to measure thermal conductivity, resistance, absorption and diffusivity constants of the tested fabric samples. Differences between dry and wet fabrics have been carefully detected and analyzed. We have developed a new measurement protocol, the "ThermoTex" protocol, which agrees with the UNI EN 31092 standard and entails an accurate quantification of the experimental errors according to a standard statistical analysis, thus allowing a rigorous investigation of the physical behavior of the phenomena involved. As a consequence, our machinery exhibits great potentialities for optimizing the thermal comfort of fabrics, according to the market demand, thanks to the possible development of a predictive phenomenological theory of the effects involved.

  6. Scale effects on thermal buckling properties of carbon nanotube

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yize, E-mail: wangyize@gmail.co [P.O. Box 137, School of Astronautics, Harbin Institute of Technology, Harbin 150001 (China); Department of Mechanical Sciences and Engineering, Tokyo Institute of Technology, 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Li Fengming, E-mail: fmli@hit.edu.c [P.O. Box 137, School of Astronautics, Harbin Institute of Technology, Harbin 150001 (China); Kishimoto, Kikuo [Department of Mechanical Sciences and Engineering, Tokyo Institute of Technology, 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8552 (Japan)

    2010-11-01

    In this Letter, the thermal buckling properties of carbon nanotube with small scale effects are studied. Based on the nonlocal continuum theory and the Timoshenko beam model, the governing equation is derived and the nondimensional critical buckling temperature is presented. The influences of the scale coefficients, the ratio of the length to the diameter, the transverse shear deformation and rotary inertia are discussed. It can be observed that the small scale effects are significant and should be considered for thermal analysis of carbon nanotube. The nondimensional critical buckling temperature becomes higher with the ratio of length to diameter increasing. Furthermore, for smaller ratios of the length to the diameter and higher mode numbers, the transverse shear deformation and rotary inertia have remarkable influences on the thermal buckling behaviors.

  7. Thermal properties of a novel nanoencapsulated phase change material for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Fuensanta, Mónica, E-mail: monica.fuensanta@aidico.es [AIDICO, Technological Institute of Construction, Camí de Castella, 4, 03660 Novelda, Alicante (Spain); Paiphansiri, Umaporn [Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany); Romero-Sánchez, María Dolores, E-mail: md.romero@aidico.es [AIDICO, Technological Institute of Construction, Camí de Castella, 4, 03660 Novelda, Alicante (Spain); Guillem, Celia; López-Buendía, Ángel M. [AIDICO, Technological Institute of Construction, Camí de Castella, 4, 03660 Novelda, Alicante (Spain); Landfester, Katharina [Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany)

    2013-08-10

    Highlights: • A paraffin wax RT80 was encapsulated in styrene–butyl acrylate copolymer as polymer shell using miniemulsion polymerization process to obtain a novel nanoencapsulated PCM with 80 °C melting temperature. • Nano-PCMs have high compact structure, spherical morphology and thermal stability. • The nano-PCMs have potential applications as thermal energy storage materials. - Abstract: A novel nanoencapsulation of a paraffine type phase change material, RT80, in a styrene–butyl acrylate copolymer shell using the miniemulsion polymerization process was carried out. General characteristics of the RT80 nanoparticles in terms of thermal properties, morphology, chemical composition and particle size distribution were characterized by Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR) and Dynamic Light Scattering (DLS). The influence of different monomers (styrene, butyl acrylate) and the surfactant/paraffin mass ratios on nanoparticles properties such as thermal capacity, particle size and morphology were systematically investigated. In all cases studied, encapsulation efficiency was close to 80 wt% with a particle size distribution between 52 and 112 nm and regular spherical shape and uniform structure. The amount of encapsulated paraffin achieved was comprised between 8 and 20%. Melting and crystallization heats were found to be approximately 5–25 J g{sup −1}, mainly depending on surfactant/paraffin mass ratio. Melting temperature of RT80 nanoparticles slightly decreased (1–7 °C) respect to the raw RT80. In addition, the encapsulated RT80 nanoparticles show thermal stability even after 200 thermal (heat-cooling) cycles.

  8. Enhanced mechanical, thermal, and electric properties of graphene aerogels via supercritical ethanol drying and high-temperature thermal reduction.

    Science.gov (United States)

    Cheng, Yehong; Zhou, Shanbao; Hu, Ping; Zhao, Guangdong; Li, Yongxia; Zhang, Xinghong; Han, Wenbo

    2017-05-03

    Graphene aerogels with high surface areas, ultra-low densities and thermal conductivities have been prepared to exploit their wide applications from pollution adsorption to energy storage, supercapacitor, and thermal insulation. However, the low mechanical properties, poor thermal stability and electric conductivity restrict these aerogels' applications. In this paper, we prepared mechanically strong graphene aerogels with large BET surface areas, low thermal conductivities, high thermal stability and electric conductivities via hydrothermal reduction and supercritical ethanol drying. Annealing at 1500 °C resulted in slightly increased thermal conductivity and further improvement in mechanical properties, oxidation temperature and electric conductivity of the graphene aerogel. The large BET surface areas, together with strong mechanical properties, low thermal conductivities, high thermal stability and electrical conductivities made these graphene aerogels feasible candidates for use in a number of fields covering from batteries to sensors, electrodes, lightweight conductor and insulation materials.

  9. Superior tribological properties of an amorphous carbon film with a graphite-like structure

    Institute of Scientific and Technical Information of China (English)

    Wang Yong-Jun; Li Hong-Xuan; Ji Li; Liu Xiao-Hong; Wu Yan-Xia; Zhou Hui-Di; Chen Jian-Min

    2012-01-01

    Amorphous carbon films with high sp2 concentrations are deposited by unbalanced magnetron sputtering with a narrow range of substrate bias voltage. Field emission scanning electron microscopes (FESEMs),high resolution transmission electron microscopes (HRTEMs),atomic force microscopes (AFMs),the Raman spectrometers,nanoindentation,and tribometers are subsequently used to characterize the microstructures and the properties of the resulting films.It is found that the present films are dominated by the sp2 sites.However,the films demonstrate a moderate hardness together with a low internal stress.The high hardness of the deposited film originates from the crosslinking of the sp2 clusters by the sp3 sites.The presence of the graphite-like clusters in the film structure may be responsible for the low internal stress.What is more important is that the resulting films show excellent tribological properties with high load capacity and excellent wear resistance in humid atmospheres.The relationship between the microstructure determined by the deposition condition and the film characteristic is discussed in detail.

  10. Nanocolumnar Crystalline Vanadium Oxide-Molybdenum Oxide Antireflective Smart Thin Films with Superior Nanomechanical Properties.

    Science.gov (United States)

    Dey, Arjun; Nayak, Manish Kumar; Esther, A Carmel Mary; Pradeepkumar, Maurya Sandeep; Porwal, Deeksha; Gupta, A K; Bera, Parthasarathi; Barshilia, Harish C; Mukhopadhyay, Anoop Kumar; Pandey, Ajoy Kumar; Khan, Kallol; Bhattacharya, Manjima; Kumar, D Raghavendra; Sridhara, N; Sharma, Anand Kumar

    2016-11-17

    Vanadium oxide-molybdenum oxide (VO-MO) thin (21-475 nm) films were grown on quartz and silicon substrates by pulsed RF magnetron sputtering technique by altering the RF power from 100 to 600 W. Crystalline VO-MO thin films showed the mixed phases of vanadium oxides e.g., V2O5, V2O3 and VO2 along with MoO3. Reversible or smart transition was found to occur just above the room temperature i.e., at ~45-50 °C. The VO-MO films deposited on quartz showed a gradual decrease in transmittance with increase in film thickness. But, the VO-MO films on silicon exhibited reflectance that was significantly lower than that of the substrate. Further, the effect of low temperature (i.e., 100 °C) vacuum (10(-5) mbar) annealing on optical properties e.g., solar absorptance, transmittance and reflectance as well as the optical constants e.g., optical band gap, refractive index and extinction coefficient were studied. Sheet resistance, oxidation state and nanomechanical properties e.g., nanohardness and elastic modulus of the VO-MO thin films were also investigated in as-deposited condition as well as after the vacuum annealing treatment. Finally, the combination of the nanoindentation technique and the finite element modeling (FEM) was employed to investigate yield stress and von Mises stress distribution of the VO-MO thin films.

  11. Nanocolumnar Crystalline Vanadium Oxide-Molybdenum Oxide Antireflective Smart Thin Films with Superior Nanomechanical Properties

    Science.gov (United States)

    Dey, Arjun; Nayak, Manish Kumar; Esther, A. Carmel Mary; Pradeepkumar, Maurya Sandeep; Porwal, Deeksha; Gupta, A. K.; Bera, Parthasarathi; Barshilia, Harish C.; Mukhopadhyay, Anoop Kumar; Pandey, Ajoy Kumar; Khan, Kallol; Bhattacharya, Manjima; Kumar, D. Raghavendra; Sridhara, N.; Sharma, Anand Kumar

    2016-11-01

    Vanadium oxide-molybdenum oxide (VO-MO) thin (21-475 nm) films were grown on quartz and silicon substrates by pulsed RF magnetron sputtering technique by altering the RF power from 100 to 600 W. Crystalline VO-MO thin films showed the mixed phases of vanadium oxides e.g., V2O5, V2O3 and VO2 along with MoO3. Reversible or smart transition was found to occur just above the room temperature i.e., at ~45-50 °C. The VO-MO films deposited on quartz showed a gradual decrease in transmittance with increase in film thickness. But, the VO-MO films on silicon exhibited reflectance that was significantly lower than that of the substrate. Further, the effect of low temperature (i.e., 100 °C) vacuum (10-5 mbar) annealing on optical properties e.g., solar absorptance, transmittance and reflectance as well as the optical constants e.g., optical band gap, refractive index and extinction coefficient were studied. Sheet resistance, oxidation state and nanomechanical properties e.g., nanohardness and elastic modulus of the VO-MO thin films were also investigated in as-deposited condition as well as after the vacuum annealing treatment. Finally, the combination of the nanoindentation technique and the finite element modeling (FEM) was employed to investigate yield stress and von Mises stress distribution of the VO-MO thin films.

  12. Superior Charpy impact properties of ODS ferritic steel irradiated in JOYO

    Science.gov (United States)

    Kuwabara, T.; Kurishita, H.; Ukai, S.; Narui, M.; Mizuta, S.; Yamazaki, M.; Kayano, H.

    1998-10-01

    The effect of neutron irradiation on Charpy impact properties of an ODS ferritic steel developed by PNC was studied. The miniaturized Charpy V-notch (MCVN) specimens (1.5 × 1.5 × 20 mm) of two orientations (longitudinal, called 1DS-L, and transverse, 1DS-T) were irradiated to fluence levels of (0.3-3.8) × 10 26 n/m 2 ( E n > 0.1 MeV) between 646 and 845 K in JOYO. MCVN specimens before and after the irradiation were subjected to instrumented Charpy impact tests. The test results and fracture surface observations showed that in the unirradiated state the steel showed no ductile-to-brittle transition behavior until 153 K regardless of orientation and the upper shelf energy of the steel was as high as that of a high-strength ferritic steel without dispersed oxide. Such excellent impact properties were essentially maintained after the irradiation although an appreciable decrease in absorbed energy occurred by higher temperature irradiations at and above 793 K.

  13. Mechanical and Thermal Stability Properties of Modified Rice Straw Fiber Blend with Polycaprolactone Composite

    Directory of Open Access Journals (Sweden)

    Roshanak Khandanlou

    2014-01-01

    Full Text Available The goal of this study was to investigate the effect of modified rice straw (ORS on the mechanical and thermal properties of modified rice straw/polycaprolactone composites (ORS/PCL-Cs. The composites (Cs of polycaprolactone (PCL with ORS were successfully synthesized using the solution-casting method. The RS modified with octadecylamine (ODA as an organic modifier. The prepared composites were characterized by using powder X-ray diffraction (XRD, thermogravimetric analysis (TGA, scanning electron microscopy (SEM, and Fourier transforms infrared spectroscopy (FT-IR, and mechanical properties were investigated. Composites of ORS/PCL showed superior mechanical properties due to greater compatibility of ORS with PCL. The XRD results showed that the intensity of the peaks decreased with the increase of ORS content from 1.0 to 7.0 wt.% in comparison with PCL peaks. Tensile measurement showed an increase in tensile modulus but a decrease in tensile strength and elongation at break as the ORS contents are increased from 1.0 to 7.0 wt.%; on the other hand, tensile strength was improved with the addition of 5.0 wt.% of ORS. Thermal stability was decreased with the increase of ORS contents. SEM micrograph indicated good dispersion of ORS into the matrix, and FT-IR spectroscopy showed that the interaction between PCL and ORS is physical interaction.

  14. Superior Thermally Stable and Nonflammable Porous Polybenzimidazole Membrane with High Wettability for High-Power Lithium-Ion Batteries.

    Science.gov (United States)

    Li, Dan; Shi, Dingqin; Xia, Yonggao; Qiao, Lin; Li, Xianfeng; Zhang, Huamin

    2017-02-28

    Separators with high security, reliability, and rate capacity are in urgent need for the advancement of high power lithium ion batteries. The currently used porous polyolefin membranes are critically hindered by their low thermal stability and poor electrolyte wettability, which further lead to low rate capacity. Here we present a novel promising porous polybenzimidazole (PBI) membrane with super high thermal stability and electrolyte wettability. The rigid structure and functional groups in the PBI chain enable membranes to be stable at temperature as high as 400 °C, and the unique flame resistance of PBI could ensure the high security of a battery as well. In particular, the prepared membrane owns 328% electrolyte uptake, which is more than two times higher than commercial Celgard 2325 separator. The unique combination of high thermal stability, high flame resistance and super high electrolyte wettability enable the PBI porous membranes to be highly promising for high power lithium battery.

  15. Effect of cryogenic treatment on thermal conductivity properties of copper

    Science.gov (United States)

    Nadig, D. S.; Ramakrishnan, V.; Sampathkumaran, P.; Prashanth, C. S.

    2012-06-01

    Copper exhibits high thermal conductivity properties and hence it is extensively used in cryogenic applications like cold fingers, heat exchangers, etc. During the realization of such components, copper undergoes various machining operations from the raw material stage to the final component. During these machining processes, stresses are induced within the metal resulting in internal stresses, strains and dislocations. These effects build up resistance paths for the heat carriers which transfer heat from one location to the other. This in turn, results in reduction of thermal conductivity of the conducting metal and as a result the developed component will not perform as per expectations. In the process of cryogenic treatment, the metal samples are exposed to cryogenic temperature for extended duration of time for 24 hours and later tempered. During this process, the internal stresses and strains are reduced with refinement of the atomic structure. These effects are expected to favourably improve thermal conductivity properties of the metal. In this experimental work, OFHC copper samples were cryotreated for 24 hours at 98 K and part of them were tempered at 423K for one hour. Significant enhancement of thermal conductivity values were observed after cryotreating and tempering the copper samples.

  16. Handbook on dielectric and thermal properties of microwaveable materials

    CERN Document Server

    Komarov, Vyacheslav V

    2012-01-01

    The application of microwave energy for thermal processing of different materials and substances is a rapidly growing trend in modern science and engineering. In fact, optimal design work involving microwaves is impossible without solid knowledge of the properties of these materials. Here s a practical reference that collects essential data on the dielectric and thermal properties of microwaveable materials, saving you countless hours on projects in a wide range of areas, including microwave design and heating, applied electrodynamics, food science, and medical technology. This unique book provides hard-to-find information on complex dielectric permittivity of media at industrial, scientific, and medical frequencies (430 MHz, 915MHz, 2.45GHz, 5.8 GHz, and 24.125GHz). Written by a leading expert in the field, this authoritative book does an exceptional job at presenting critical data on various materials and explaining what their key characteristics are concerning microwaves.

  17. Rheological and thermal properties of PP-based WPC

    Science.gov (United States)

    Mazzanti, V.; Mollica, F.; El Kissi, N.

    2014-05-01

    Wood Plastic Composite (WPC) has attracted great interest in outdoor building products for the reduced cost and the possibility of using recycled materials. Nevertheless the material shows two problems: the large viscosity due to the presence of high concentrations of filler and the degradation of cellulose during processing The aim of this work was to investigate the rheological and thermal properties of WPC. The material used for the experiments was a commercial PP-based WPC compound, with different concentrations of natural fibers (30, 50, 70% wt.). The thermal properties were studied to check for degradation of natural fibers during the subsequent rheological tests. Analyzing the storage and loss moduli and the complex viscosity curves obtained using a parallel plate rheometer it was possible to observe some features related to the viscoelastic nature of the composite.

  18. Thermal sensor properties of PANI(EB)–CSA ( = 0.4 ± 0.1 mol) polymer thin films

    Indian Academy of Sciences (India)

    T Prakash; S A K Narayan Dass; K Prem Nazeer

    2002-11-01

    Films of polyaniline(EB) doped with camphor sulfonic acid (CSA) from -cresol on glass substrates exhibit considerable metallic properties. Such polymer metallic films have thermal sensitivity superior to ceramic metal (Cermet) films, prepared by metallo organic deposition (MOD) technique on silicon substrates. These PANI(EB)–CSA ( = 0.5, 0.4, 0.3 mol) polymer films were developed through controlled temperature atmosphere 60 ± 2°C for 60 min, and with the help of temperature dependence of resistivity (ρ) values, high temperature coefficient of resistance (TCR) i.e. values, and figure of merit (ρ ) values of these films, thermal sensitivity were compared from that we observed. Among the three doping ratios the PANI(EB)–CSA$_{0.3 mol}$ film (4.4 m thick) on glass substrate resistivity (ρ) values in the range of 838–1699 .m with high TCR i.e. = 10,291 ppm/°C and figure of merit (ρ ) value in range of 8.62–17.48 m/°C seems to be the best. This paper deals with these superior thermal-sensing properties together with optical studies and surface topography by atomic force microscopy (AFM). These polymer films offer design advantages in developing ‘thin film polymer thermal sensor’.

  19. Thermal properties of SFR-HPC exposed to high temperatures

    Science.gov (United States)

    Scheinherrová, Lenka; Pavlík, Zbyšek

    2017-07-01

    In this paper, a non-adiabatic method was used for the assessment of specific heat capacity of steel fibre reinforced high performance concrete in the temperature range 105-1000 °C. The tested SFR-HPC mix was produced from CEM II 42.5 R, ground granulated blast furnace slag, silica sand with maximum particle size of 2 mm, silica fume, brass-coated steel fibres, superplasticizer on polycarboxylate ether basis and batch water. For the studied material, properties after 2 hours thermal treatment at the temperatures of 105 °C, 200 °C, 400 °C, 600 °C, 800 °C, and 1000 °C respectively were tested. Among them, bulk density, matrix density, total open porosity and thermal parameters as thermal conductivity, thermal diffusivity and specific heat capacity were measured. The measured specific heat capacity exhibited high dependence on temperature and pointed to the structural changes that studied material underwent at high temperatures. Accordingly, the obtained residual parameters revealed the thermally induced damage of SFR-HPC and critical temperatures for its functionality.

  20. Thermal properties of degraded lowland peat-moorsh soils

    Science.gov (United States)

    Gnatowski, Tomasz

    2016-04-01

    Soil thermal properties, i.e.: specific heat capacity (c), thermal conductivity (K), volumetric heat capacity (C) govern the thermal environment and heat transport through the soil. Hence the precise knowledge and accurate predictions of these properties for peaty soils with high amount of organic matter are especially important for the proper forecasting of soil temperature and thus it may lead to a better assessment of the greenhouse gas emissions created by microbiological activity of the peatlands. The objective of the study was to develop the predictive models of the selected thermal parameters of peat-moorsh soils in terms of their potential applicability for forecasting changes of soil temperature in degraded ecosystems of the Middle Biebrza River Valley area. Evaluation of the soil thermal properties was conducted for the parameters: specific heat capacity (c), volumetric heat capacities of the dry and saturated soil (Cdry, Csat) and thermal conductivities of the dry and saturated soil (Kdry, Ksat). The thermal parameters were measured using the dual-needle probe (KD2-Pro) on soil samples collected from seven peaty soils, representing total 24 horizons. The surface layers were characterized by different degrees of advancement of soil degradation dependent on intensiveness of the cultivation practises (peaty and humic moorsh). The underlying soil layers contain peat deposits of different botanical composition (peat-moss, sedge-reed, reed and alder) and varying degrees of decomposition of the organic matter, from H1 to H7 (von Post scale). Based on the research results it has been shown that the specific heat capacity of the soils differs depending on the type of soil (type of moorsh and type of peat). The range of changes varied from 1276 J.kg-1.K-1 in the humic moorsh soil to 1944 J.kg-1.K-1 in the low decomposed sedge-moss peat. It has also been stated that in degraded peat soils with the increasing of the ash content in the soil the value of specific heat

  1. Formation of NiFe2O4/Expanded Graphite Nanocomposites with Superior Lithium Storage Properties

    Science.gov (United States)

    Xiao, Yinglin; Zai, Jiantao; Tian, Bingbing; Qian, Xuefeng

    2017-07-01

    A NiFe2O4/expanded graphite (NiFe2O4/EG) nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 mAh g-1 at a current of 1 A g-1 after 800 cycles. This good performance may be attributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure, efficiently accommodate volume changes in the NiFe2O4-based anodes, and alleviate aggregation of NiFe2O4 nanoparticles.

  2. Mussel-Inspired Anchoring of Polymer Loops That Provide Superior Surface Lubrication and Antifouling Properties.

    Science.gov (United States)

    Kang, Taegon; Banquy, Xavier; Heo, Jinhwa; Lim, Chanoong; Lynd, Nathaniel A; Lundberg, Pontus; Oh, Dongyeop X; Lee, Han-Koo; Hong, Yong-Ki; Hwang, Dong Soo; Waite, John Herbert; Israelachvili, Jacob N; Hawker, Craig J

    2016-01-26

    We describe robustly anchored triblock copolymers that adopt loop conformations on surfaces and endow them with unprecedented lubricating and antifouling properties. The triblocks have two end blocks with catechol-anchoring groups and a looping poly(ethylene oxide) (PEO) midblock. The loops mediate strong steric repulsion between two mica surfaces. When sheared at constant speeds of ∼2.5 μm/s, the surfaces exhibit an extremely low friction coefficient of ∼0.002-0.004 without any signs of damage up to pressures of ∼2-3 MPa that are close to most biological bearing systems. Moreover, the polymer loops enhance inhibition of cell adhesion and proliferation compared to polymers in the random coil or brush conformations. These results demonstrate that strongly anchored polymer loops are effective for high lubrication and low cell adhesion and represent a promising candidate for the development of specialized high-performance biomedical coatings.

  3. Epoxide composites with thermally reduced graphite oxide and their properties

    Science.gov (United States)

    Arbuzov, A. A.; Muradyan, V. E.; Tarasov, B. P.; Sokolov, E. A.; Babenko, S. D.

    2016-05-01

    The properties of epoxide composites modified by thermal reduced graphite oxide are studied. The dielectric permittivities of epoxide composites with additives of up to 1.5 wt % of reduced graphite oxide are studied at a frequency of 9.8 GHz. It is shown that despite its low electrical conductivity, the large specific surface area of reduced graphite oxide allows us to create epoxide composites with high complex dielectric permittivities and dielectric loss tangents.

  4. Enhancement in thermal and mechanical properties of bricks

    OpenAIRE

    Shibib Khalid S.; Qatta Haqi I.; Hamza Mohammed S.

    2013-01-01

    A new type of porous brick is proposed. Sawdust is initially well mixed with wet clay in order to create voids inside the brick during the firing process. The voids will enhance the total performance of the brick due to the reduction of its density and thermal conductivity and a minor reduction of its compressive stress. All these properties have been measured experimentally and good performance has been obtained. Although a minor reduction in compressive s...

  5. Synthesis, electrochemistry, STM investigation of oligothiophene self-assemblies with superior structural order and electronic properties

    Science.gov (United States)

    Kuo, Cheng-Yu; Liu, Yinghao; Yarotski, Dmitry; Li, Hao; Xu, Ping; Yen, Hung-Ju; Tretiak, Sergei; Wang, Hsing-Lin

    2016-12-01

    Three oligothiophene (terthiophene, tetrathiophene and pentathiophene) derivatives are synthesized and their monolayer self-assemblies on gold (Au) are prepared via Au-S covalent bond. Our UV-Vis experimental characterization of solution reveals the dependence of the optical properties on the conjugation length of the oligothiophenes, which compares well with Time-Dependent Density Functional Theory (TDDFT) simulations of spectra of individual chromophores. Photoluminescent spectra of thin films show pronounced red shifts compared to that of solutions, suggesting strong inter-oligomer interactions. The comparative studies of cyclic voltammograms of tetrathiophene from solution, cast film and self-assembled monolayer (SAM) indicate presence of one, two, and three oxidized species in these samples, respectively, suggesting a very strong electronic coupling between tetrathiophene molecules in the SAM. Scanning tunneling microscopy (STM) imaging of SAMs of the tetrathiophene on an atomically flat Au surface exhibits formation of monolayer assemblies with molecular order, and the molecular packing appears to show an overlay of oligothiophene molecules on top of another one. In contrast, the trimer and pentamer images show only aggregated species lacking long-range order on the molecular level. Such trends in going from disordered-ordered-disordered monolayer assemblies are mainly due to a delicate balance between inter-chromophore π-π couplings, hydrophobic interaction and the propensity to form Au-S covalent bond. Such hypothesis has been validated by our computational results suggesting different interaction patterns of oligothiophenes with odd numbered and even numbered thiophene repeat units placed in a dimer configuration. Observed correlations between oligomer geometry and structural order of monolayer assembly elucidate important structure-property relationships and have implications for these molecular structures in organic optoelectronic devices and energy

  6. Thermal Properties of Moving UV Features in Prominences

    Science.gov (United States)

    Kucera, Therese A.

    2003-01-01

    Multi-thermal features with speeds of 5-70 kilometers per second perpendicular to the line of sight are common in the prominences which showed traceable motions. These speeds are noticeably higher than the typical speeds of 5-20 kilometers per second observed in H-alpha data from "quiet" prominences and are more typical of "activated" prominences in which H-alpha blob speeds of up to 40 kilometers per second have been reported. In order to make a more quantitative determination of the thermal properties of the moving features seen in the UV, we use the SOHO instruments SUMER and CDS to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The resulting observations in lines spectral lines in a range of "transition region" temperatures allow us to analyze the thermal properties of the moving prominence sources as a function of time.

  7. Thermal stability, optical property, and morphology of flexible organoclay films.

    Science.gov (United States)

    Shin, Jieun; Chang, Jin-Hae

    2011-07-01

    Novel organo-saponite (organo-SPT) films with excellent thermal stability and optical property were synthesized by solution casting. Na ion-exchanged saponite (pristine SPT), hexadecylammonium ion-exchanged SPT (C16-SPT), hexadecyltriphenyl phosphonium ion-exchanged SPT (C16PPh3-SPT), and tetraphenyl phosphonium ion-exchanged SPT (PPh4-SPT) were used to prepare clay films. We examined the relationship between the structures and properties of the various SPT films. SPT films were examined by means of wide-angle X-ray diffraction (XRD), electronic microscopy (FE-SEM), thermogravimetric analysis (TGA), ultraviolet-visible (UV-vis.) spectrometer. On the basis of these analyses, we sought to improve both the thermal stability and the optical properties. Clay films composed of C16PPh3-SPT and PPh4-SPT were found to be more thermally stable than those composed of pristine SPT or C16-SPT. On the other hand, the transmittance was not significantly affected by variations in the organo-SPT material.

  8. Comparison dielectric and thermal properties of polyurethane/organoclay nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Baysal, Gülay [Department of Chemistry, University of Dicle, Diyarbakır 21280 (Turkey); Aydin, Haluk, E-mail: halukaydin@dicle.edu.tr [Department of Chemistry, University of Dicle, Diyarbakır 21280 (Turkey); Köytepe, Süleyman; Seçkin, Turgay [Department of Chemistry, University of Inonu, Malatya 44280 (Turkey)

    2013-08-20

    Highlights: • The PU/organoclay composites was successfully obtained by mixing method from solution. • The growth temperature does not exceed 60 °C in any step of the modification and drying. • PU-IL-Mt modified with IL showed power alternative to PU-QAS-Mt modified with QAS. • The PU composites exhibited better thermal stability and lower dielectric constants than the pure PU. - Abstract: Polyurethane composites were obtained with different organoclay contents. The organoclay Na{sup +}-montmorillonite was dispersed in the PU matrix by mixing method from solution. Na{sup +}-montmorillonite was modified with dodecyl ammonium sulphate and 1-methyl-3-octyl imidazolium tetrafluoroborate. The nanocomposites obtained by using different modifier were compared in terms of dielectric and thermal properties. The dispersion state of the organoclay particles and its effect on the thermogravimetric and dielectric properties of the composites was investigated. The characterization of PU/organooclay composites was carried out by means of scanning electron microscopy, Fourier transform infrared, thermogravimetric analysis and X-ray diffraction. The dielectric properties of the PU/organoclay nanocomposites were studied in detail. The obtained PU/organoclay intercalated nanocomposites exhibited better thermal stability and improved lower dielectric constants than the pure PU.

  9. Mechanical and thermal properties of bulk ZrB2

    Science.gov (United States)

    Nakamori, Fumihiro; Ohishi, Yuji; Muta, Hiroaki; Kurosaki, Ken; Fukumoto, Ken-ichi; Yamanaka, Shinsuke

    2015-12-01

    ZrB2 appears to have formed in the fuel debris at the Fukushima Daiichi nuclear disaster site, through the reaction between Zircaloy cladding materials and the control rod material B4C. Since ZrB2 has a high melting point of 3518 K, the ceramic has been widely studied as a heat-resistant material. Although various studies on the thermochemical and thermophysical properties have been performed for ZrB2, significant differences exist in the data, possibly due to impurities or the porosity within the studied samples. In the present study, we have prepared a ZrB2 bulk sample with 93.1% theoretical density by sintering ZrB2 powder. On this sample, we have comprehensively examined the thermal and mechanical properties of ZrB2 by the measurement of specific heat, ultrasonic sound velocities, thermal diffusivity, and thermal expansion. Vickers hardness and fracture toughness were also measured and found to be 13-23 GPa and 1.8-2.8 MPa m0.5, respectively. The relationships between these properties were carefully examined in the present study.

  10. Preparation and characterization of electrospun poly(phthalazinone ether nitrile ketone) membrane with novel thermally stable properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Gang; Zhang, Hao; Qian, Bingqing [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Wang, Jinyan, E-mail: wangjinyan@dlut.edu.cn [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Jian, Xigao [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Qiu, Jieshan, E-mail: jqiu@dlut.edu.cn [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

    2015-10-01

    Highlights: • Poly (phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. • Electrospun membrane exhibits a good thermostability. • Electrospun membrane. - Abstract: Electrospun nanofibrous membranes have several applications because of their excellent properties, such as high porosity, small fiber diameter, and large surface area. However, high-temperature resistant electrospun membranes remain a challenge because of the absence of precursors that offer spinnability, scalability, and superior thermal stability. In this study, poly(phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. Electrospun PPENK membranes were characterized by scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and tensile stress–strain tests. Results indicated that the prepared electrospun membranes had a very high glass transition temperature, superior chemical resistance, and excellent mechanical strength. These desirable properties broaden their potential application in membranes and treatment of various hot fluid streams without strict temperature control.

  11. Composition, structure and properties of sediment thermal springs of Kamchatka

    Science.gov (United States)

    Shanina, Violetta; Smolyakov, Pavel; Parfenov, Oleg

    2016-04-01

    The paper deals with the physical and mechanical properties sediment thermal fields Mutnovsky, Lower Koshelevo and Bannyh (Kamchatka). This multi-component soils, mineral and chemical composition of which depends on the formation factors (pH, temperature, salinity of water, composition and structure of the host volcanic rocks). Samples Lower Koshelevo sediment thermal sources differ in the following composition: smectite, kaolinite, kaolinite-smectite mixed-mineral. Samples of sediment thermal springs Mutnovsky volcano in accordance with the X-ray analysis has the following composition: volcanic glass, crystalline sulfur, plagioclase, smectite, illite-smectite mixed, illite, chlorite, quartz, cristobalite, pyrite, melanterite, kaolinite. Natural moisture content samples of sediment thermal springs from 45 to 121%, hygroscopic moisture content of 1.3 to 3.7%. A large amount of native sulfur (up to 92%) and the presence of amorphous material gives low values of density of solid particles (up to 2.1 g/cm3) samples Mutnovskii thermal field. The values of the density of solids sediment Koshelevo and Bannyh hot springs close to those of the main components of mineral densities (up to 2.6-3.0 g/cm3). The results of the particle size distribution and microaggregate analysis of sediment thermal springs Lower Koshelevo field shows that the predominance observed of particles with a diameter from 0.05 mm to 0.25 mm, the coefficient of soil heterogeneity heterogeneous. In the bottom sediments of the thermal springs of the volcano Mutnovsky poorly traced predominance of one faction. Most prevalent fraction with particle size 0.01 - 0.05 mm. When analyzing the content in the soil microaggregates their content is shifted towards particles with a diameter of 0.25 mm. The contents of a large number of large (1-10 mm), porous rock fragments, due to the deposition of pyroclastic material from the eruptions of the last century. Present in large amounts rounded crystals of native sulfur

  12. Silk-pectin hydrogel with superior mechanical properties, biodegradability, and biocompatibility.

    Science.gov (United States)

    Numata, Keiji; Yamazaki, Shoya; Katashima, Takuya; Chuah, Jo-Ann; Naga, Naofumi; Sakai, Takamasa

    2014-06-01

    A new method is developed to prepare silk hydrogels and silk-pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. The relationship between the mechanical and biological properties and the structure of the silk-pectin hydrogels is subsequently evaluated. The present results suggest that pectin associates with silk molecules when the silk concentration exceeds 15 wt%, suggesting that a silk concentration of over 15 wt% is critical to construct interacting silk-pectin networks. The silk-pectin hydrogel reported here is composed of a heterogeneous network, which is different from fiber-reinforced, interpenetrated networks and double-network hydrogels, as well as high-stiffness hydrogels (elastic modulus of 4.7 ± 0.9 MPa, elastic stress limit of 3.9 ± 0.1 MPa, and elastic strain limit of 48.4 ± 0.5%) with regard to biocompatibility and biodegradability.

  13. Biocompatible and fluorescent superparamagnetic iron oxide nanoparticles with superior magnetic properties coated with charged polysaccharide derivatives.

    Science.gov (United States)

    Lachowicz, Dorota; Szpak, Agnieszka; Malek-Zietek, Katarzyna E; Kepczynski, Mariusz; Muller, Robert N; Laurent, Sophie; Nowakowska, Maria; Zapotoczny, Szczepan

    2017-02-01

    Syntheses and characterizations of biocompatible superparamagnetic iron oxide nanoparticles with embedded curcumin and coated with ultrathin layer of hyaluronic acid-curcumin (HA-Cur) conjugate have been reported. Zeta potential measurements confirmed effective coating of native iron oxide nanoparticles stabilized by cationic derivative of chitosan (SPION-CCh) with the synthesized HA-Cur conjugate. Both SPIONs with embedded curcumin and the ones coated with HA-Cur (SPION-CCh/HA-Cur) revealed desired magnetic characteristics while fluorescent properties were much better for the coated nanoparticles. SPION-CCh/HA-Cur nanoparticles were shown to be very promising candidates for T2 MRI contrast agents as they can easily penetrate cell membrane and their relaxivity is exceptionally high (ca. 470mM(-1)s(-1)). They may be also tracked using confocal fluorescence microscopy due to the presence of fluorescent curcumin in the coating. In vitro studies indicated that the obtained SPIONs-CCh/HA-Cur were non-toxic for EA.hy926 endothelial cells.

  14. Development of nanostructured SUS316L-2%TiC with superior tensile properties

    Science.gov (United States)

    Sakamoto, T.; Kurishita, H.; Matsuo, S.; Arakawa, H.; Takahashi, S.; Tsuchida, M.; Kobayashi, S.; Nakai, K.; Terasawa, M.; Yamasaki, T.; Kawai, M.

    2015-11-01

    Structural materials used in radiation environments require radiation tolerance and sufficient mechanical properties in the controlled state. In order to offer SUS316L austenitic stainless steel with the assumed requirements, nanostructured SUS316L with TiC addition of 2% (SUS316L-2TiC) that is capable of exhibiting enhanced tensile ductility and flow strength sufficient for structural applications was fabricated by advanced powder metallurgical methods. The methods include MA (Mechanical Alloying), HIP (Hot Isostatic Pressing), GSMM (Grain boundary Sliding Microstructural Modification) for ductility enhancement, cold rolling at temperatures below Md (the temperature where the martensite phase occurs by plastic deformation) for phase transformation from austenite to martensite and heat treatment for reverse transformation from martensite to austenite. It is shown that the developed SUS316L-2TiC exhibits ultrafine grains with sizes of 90-270 nm, accompanied by TiC precipitates with 20-50 nm in grain interior and 70-110 nm at grain boundaries, yield strengths of 1850 to 900 MPa, tensile strengths of 1920 to 1100 MPa and uniform elongations of 0.6-21%, respectively, depending on the heat treatment temperature after rolling at -196 °C.

  15. Thermal Shock Properties of Cladding with SiC{sub f}/SiC Composite Protective Films

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Donghee; Park, Kwangheon [Kyunghee University, Yongin (Korea, Republic of); Kim, Weonju; Park, Jiyeon; Kim, Daejong; Lee, Hyeon Geun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    In general, Zr-4 alloy is used for such nuclear fuel cladding. Zr-4 possesses a very small thermal neutron absorption cross-section and has superior corrosion resistance in the normal operating conditions of a nuclear reactor. However, in the case of a critical accident such as a LOCA (loss-of-coolant accident) in the Fukushima disaster, the risk of hydrogen explosion becomes serious. That is, in the case of coolant leakage, a dramatic reaction between the nuclear fuel cladding and steam can cause a heating reaction accompanied by rapid high-temperature oxidation, while creating a huge amount of hydrogen. Hence, the search for an alternative material for nuclear fuel cladding is being actively undertaken. Ceramic-based nuclear fuel cladding is receiving much attention as a means of improving safety. SiC has excellent properties of resistance to high temperature and high exposure and superior mechanical properties, as well as a very small thermal neutron absorption cross-section (0.09 barns), which causes almost no decrease in mechanical strength or volume change following exposure. This experiment examined the thermal shock properties and microstructure of cladding that has SiCf/SiC composite protective film, using polycarbosilane preceramic polymer.

  16. Thermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites.

    Science.gov (United States)

    Mengeloglu, Fatih; Karakus, Kadir

    2008-01-24

    Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One for WFand one for thermoplastics, two main decomposition peaks were observed. Morphologicalstudy showed that addition of coupling agent improved the compatibility between WFs andthermoplastic. WFs were embedded into the thermoplastic matrix indicating improvedadhesion. However, the bonding was not perfect because some debonding can also be seenon the interface of WFs and thermoplastic matrix. In the case of mechanical properties ofWF filled recycled thermoplastic, HDPE and PP based composites provided similar tensileand flexural properties. The addition of coupling agents improved the properties ofthermoplastic composites. MAPE coupling agents performed better in HDPE while MAPPcoupling agents were superior in PP based composites. The composites produced with thecombination of 50-percent mixture of recycled HDPE and PP performed similar with theuse of both coupling agents. All produced composites provided flexural properties requiredby the ASTM standard for polyolefin-based plastic lumber decking boards.

  17. Thermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites

    Directory of Open Access Journals (Sweden)

    Kadir Karakus

    2008-01-01

    Full Text Available Thermal behaviors of wheat straw flour (WF filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One for WFand one for thermoplastics, two main decomposition peaks were observed. Morphologicalstudy showed that addition of coupling agent improved the compatibility between WFs andthermoplastic. WFs were embedded into the thermoplastic matrix indicating improvedadhesion. However, the bonding was not perfect because some debonding can also be seenon the interface of WFs and thermoplastic matrix. In the case of mechanical properties ofWF filled recycled thermoplastic, HDPE and PP based composites provided similar tensileand flexural properties. The addition of coupling agents improved the properties ofthermoplastic composites. MAPE coupling agents performed better in HDPE while MAPPcoupling agents were superior in PP based composites. The composites produced with thecombination of 50-percent mixture of recycled HDPE and PP performed similar with theuse of both coupling agents. All produced composites provided flexural properties requiredby the ASTM standard for polyolefin-based plastic lumber decking boards.

  18. Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide

    Directory of Open Access Journals (Sweden)

    Strankowski Michał

    2015-12-01

    Full Text Available In this study, thermally reduced graphene oxide (TRG-containing polyurethane nanocomposites were obtained by the extrusion method. The content of TRG incorporated into polyurethane elastomer systems equaled 0.5, 1.0, 2.0 and 3.0 wt%. The morphology, static and dynamic mechanical properties, and thermal stability of the modified materials were investigated. The application of TRG resulted in a visible increase in material stiffness as confirmed by the measurements of complex compression modulus (E′ and glass transition temperature (Tg. The Tg increased with increasing content of nanofiller in the thermoplastic system. The addition of thermally reduced graphene oxide had a slight effect on thermal stability of the obtained materials. The incorporation of 0.5, 1.0, 2.0 and 3.0 wt% of TRG into a system resulted in increased char residues compared to unmodified PU elastomer. Also, this study demonstrated that after exceeding a specific amount of TRG, the physicomechanical properties of modified materials start to deteriorate.

  19. Thermal, Morphological and Rheological Properties of Rigid Polyurethane Foams as Thermal Insulating Materials

    Science.gov (United States)

    Kim, Ji Mun; Han, Mi Sun; Kim, Youn Hee; Kim, Woo Nyon

    2008-07-01

    The polyurethane foams (PUFs) were prepared by polyether polyols, polymeric 4,4'-diphenylmethane diisocyanate (PMDI), silicone surfactants, amine catalysts and cyclopentane as a blowing agent. Solid and liquid type fillers were used as a nucleating agent to decrease a cell size of the PUFs as well as improve the thermal insulating properties of the PUFs. The PUFs were prepared by adding solid and liquid type fillers in the range of 1 to 3 wt%. For the liquid type fillers, the cell size of the PUFs showed minimum and found to decrease compared the PUF without adding fillers. Also, thermal conductivity of the PUFs with adding fillers showed minimum. For the solid type fillers, cell size and thermal conductivity of the PUFs were observed to decrease with the filler content up to 3 wt%. From these results, it is suggested that the thermal insulating property of the PUFs can be improved by adding fillers as a nucleating agent. Also, storage and loss modulus of the PUFs will be presented to study gelling points of the PUFs.

  20. Thermal Properties Capability Development Workshop Summary to Support the Implementation Plan for PIE Thermal Conductivity Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The Department of Energy (DOE)-Office of Nuclear Energy (NE), Idaho National Laboratory (INL), and associated nuclear fuels programs have invested heavily over the years in infrastructure and capability development. With the current domestic and international need to develop Accident Tolerant Fuels (ATF), increasing importance is being placed on understanding fuel performance in irradiated conditions and on the need to model and validate that performance to reduce uncertainty and licensing timeframes. INL’s Thermal Properties Capability Development Workshop was organized to identify the capability needed by the various nuclear programs and list the opportunities to meet those needs. In addition, by the end of fiscal year 2015, the decision will be made on the initial thermal properties instruments to populate the shielded cell in the Irradiated Materials Characterization Laboratory (IMCL).

  1. Evaluation of the underground soil thermal storage properties in Libya

    Energy Technology Data Exchange (ETDEWEB)

    Nassar, Y.; ElNoaman, A.; Abutaima, A.; Yousif, S.; Salem, A. [Solar Energy Laboratory, Faculty of Engineering and Technology, Sebha University, P.O. Box 68, Brack (Libya)

    2006-04-15

    Experimental investigation was conducted of temperature distribution through the underground soil of Tripoli (Capital of Libya). The aim of the experiment is to monitor the temperature variation of the underground soil under a depth of 4m and around the year, in order to know the thermal capacity ability of the soil to be used as a seasonal thermal storage. The measurements covered two types of systems: the first one is dry soil and the second is dry soil covered by a glass sheet. The measurements indicate that, at a depth of 4m, the average temperatures for the dry and dry-glass covered systems are 21, 46{sup o}C, with maximum temperatures of 21.5 and 47{sup o}C during December and January, and the minimum temperatures occurred in May and June, are reached values of 19, 44{sup o}C, respectively. The temperatures for the two systems were almost constant through the year and fluctuating with a monthly period of 2p/12. Results show that, the underground thermal capacity can be used as a source of heating and cooling of buildings leading to reduce the energy consumption in this application. Furthermore, for industrial and domestic heating processes, one can utilize the dry-glass covered system to cover a significant part of the heating load. Anyhow, the experimental study may not applicable everywhere, so an analytical presentation for the system will be necessary to save money and efforts. The first step to put the analytical model in reality is to get the thermal properties of the underground soil, and this is the aim of the present study. The paper described the followed procedure during theoretical-heat transfer approach. The thermal properties were presented as a function of the ground depth, furthermore, the paper presented the measured temperatures of the two systems for Tripoli underground soil. [Author].

  2. Thermal property measurement of thin fibers by complementary methods

    Science.gov (United States)

    Munro, Troy Robert

    To improve measurement reliability and repeatability and resolve the orders of magnitude discrepancy between the two different measurements (via reduced model transient electrothermal and lock-in IR thermography), this dissertation details the development of three complementary methods to accurately measure the thermal properties of the natural and synthetic Nephila (N.) clavipes spider dragline fibers. The thermal conductivity and diffusivity of the dragline silk of the (N.) clavipes spider has been characterized by one research group to be 151-416 W m-1 K-1 and 6.4-12.3 x 10-5 m2 s -1, respectively, for samples with low to high strains (zero to 19.7%). Thermal diffusivity of the dragline silk of a different spider species, Araneus diadematus, has been determined by another research group as 2 x 10-7 m2 s-1 for un-stretched silk. This dissertation seeks to resolve this discrepancy by three complementary methods. The methods detailed are the transient electrothermal technique (in both reduced and full model versions), the 3o method (for both current and voltage sources), and the non-contact, photothermal, quantum-dot spectral shape-based fluorescence thermometry method. These methods were also validated with electrically conductive and non-conductive fibers. The resulting thermal conductivity of the dragline silk is 1.2 W m-1 K-1, the thermal diffusivity is 6 x 10-7 m2 s -1 and the volumetric heat capacity is 2000 kJ m-3 K-1, with an uncertainty of about 12% for each property.

  3. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries.

    Science.gov (United States)

    Zhao, Tingkai; She, Shengfei; Ji, Xianglin; Guo, Xinai; Jin, Wenbo; Zhu, Ruoxing; Dang, Alei; Li, Hao; Li, Tiehu; Wei, Bingqing

    2016-09-27

    The development of high capacity and long-life lithium-ion batteries is a long-term pursuing and under a close scrutiny. Most of the researches have been focused on exploring electrode materials and structures with high store capability of lithium ions and at the same time with a good electrical conductivity. Thermal conductivity of an electrode material will also have significant impacts on boosting battery capacity and prolonging battery lifetime, which is, however, underestimated. Here, we present the development of an expanded graphite embedded with Al metal nanoparticles (EG-MNPs-Al) synthesized by an oxidation-expansion process. The synthesized EG-MNPs-Al material exhibited a typical hierarchical structure with embedded Al metal nanoparticles into the interspaces of expanded graphite. The parallel thermal conductivity was up to 11.6 W·m(-1)·K(-1) with a bulk density of 453 kg·m(-3) at room temperature, a 150% improvement compared to expanded graphite (4.6 W·m(-1)·K(-1)) owing to the existence of Al metal nanoparticles. The first reversible capacity of EG-MNPs-Al as anode material for lithium ion battery was 480 mAh·g(-1) at a current density of 100 mA·g(-1), and retained 84% capacity after 300 cycles. The improved cycling stability and system security of lithium ion batteries is attributed to the excellent thermal conductivity of the EG-MNPs-Al anodes.

  4. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries

    Science.gov (United States)

    Zhao, Tingkai; She, Shengfei; Ji, Xianglin; Guo, Xinai; Jin, Wenbo; Zhu, Ruoxing; Dang, Alei; Li, Hao; Li, Tiehu; Wei, Bingqing

    2016-09-01

    The development of high capacity and long-life lithium-ion batteries is a long-term pursuing and under a close scrutiny. Most of the researches have been focused on exploring electrode materials and structures with high store capability of lithium ions and at the same time with a good electrical conductivity. Thermal conductivity of an electrode material will also have significant impacts on boosting battery capacity and prolonging battery lifetime, which is, however, underestimated. Here, we present the development of an expanded graphite embedded with Al metal nanoparticles (EG-MNPs-Al) synthesized by an oxidation-expansion process. The synthesized EG-MNPs-Al material exhibited a typical hierarchical structure with embedded Al metal nanoparticles into the interspaces of expanded graphite. The parallel thermal conductivity was up to 11.6 W·m-1·K-1 with a bulk density of 453 kg·m-3 at room temperature, a 150% improvement compared to expanded graphite (4.6 W·m-1·K-1) owing to the existence of Al metal nanoparticles. The first reversible capacity of EG-MNPs-Al as anode material for lithium ion battery was 480 mAh·g-1 at a current density of 100 mA·g-1, and retained 84% capacity after 300 cycles. The improved cycling stability and system security of lithium ion batteries is attributed to the excellent thermal conductivity of the EG-MNPs-Al anodes.

  5. Thermal Properties of Hybrid Carbon Nanotube/Carbon Fiber Polymer

    Science.gov (United States)

    Kang, Jin Ho; Cano, Roberto J.; Luong, Hoa; Ratcliffe, James G.; Grimsley, Brian W.; Siochi, Emilie J.

    2016-01-01

    Carbon fiber reinforced polymer (CFRP) composites possess many advantages for aircraft structures over conventional aluminum alloys: light weight, higher strength- and stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low thermal and electrical conductivities of CFRP composites are deficient in providing structural safety under certain operational conditions such as lightning strikes. One possible solution to these issues is to interleave carbon nanotube (CNT) sheets between conventional carbon fiber (CF) composite layers. However, the thermal and electrical properties of the orthotropic hybrid CNT/CF composites have not been fully understood. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel (Registered Trademark) IM7/8852 prepreg. The CNT sheets were infused with a 5% solution of a compatible epoxy resin prior to composite fabrication. Orthotropic thermal and electrical conductivities of the hybrid polymer composites were evaluated. The interleaved CNT sheets improved the in-plane thermal conductivity of the hybrid composite laminates by about 400% and the electrical conductivity by about 3 orders of magnitude.

  6. Study on Thermal and Mechanical Properties of EPDM Insulation

    Science.gov (United States)

    Zhang, Zhong-Shui; Xu, Jin-Sheng; Chen, Xiong; Jiang, Jing

    As the most common insulation material of solid rocket motors, thermal and mechanical properties of ethylene propylene diene monomer (EPDM) composite are inspected in the study. Referring to the results of thermogravimetric analysis (TGA), composition and morphology of EPDM composite in different thermal degradation degree are investigated by scanning electron microscope (SEM) to inspect the mechanism of thermal insulation. Mechanical properties of EPDM composite in the state of pyrolysis are investigated by uniaxial tensile tests. At the state of initial pyrolysis, composite belongs to the category of hyperelastic-viscoelastic material. The tendency of tensile strength increased and elongation decreased with increasing of heating temperature. Composite behaves as the linear rule at the state of late pyrolysis, which belongs to the category of bittle. The elasticity modulus of curves are almost the same while the heating temperature ranges from 200°C to 300°C, and then gradually go down. The tensile strength of pyrolytic material reach the highest at the heating temperature of 300°C, and the virgin material has the largest elongation.

  7. Thermal properties for an ensemble of polymer Fermi oscillators

    Science.gov (United States)

    Chacón-Acosta, Guillermo; García-Chung, Angel A.; Hernandez-Hernandez, Héctor H.

    2015-11-01

    Polymer quantum mechanics is a model inspired on loop quantum gravity in which one can study, in a simplified way, some properties of certain quantum mechanical models. There is a length parameter in this model, known as the polymer scale, comprising the discreteness introduced in this particular quantization. There is a recent analysis on quantum fields where the Fermi oscillator is polymerized by means of a non-analytic representation of the corresponding Weyl super-algebra, its energy spectrum acquires modifications by the introduction of polymer parameters, which turn out to be super-numbers. In this work we present the first step in studying thermostatistical properties of an ensemble of Fermi oscillators. As an initial approximation we consider the polymer parameters as real deviations from their usual values. We obtain modifications to the thermal properties of the system in terms of polymer parameters. In the last section we critically discuss the possible physical significance of the results.

  8. Subtask 12D5: Thermal creep properties of vanadium-base alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.M.; Loomis, B.A.; Smith, D.L. [Argonne National Lab., IL (United States)

    1995-03-01

    The objective of this work is to provide baseline data on the thermal creep properties of candidate vanadium base alloys. Vanadium-base alloys are promising candidate materials for application in fusion reactor structural components because of several important advantages. V-4Cr-4Ti has been identified as one of the most promising candidate alloys and was selected for comprehensive tests and examination. In the present investigation, thermal creep rates and stress-rupture life of V-4Cr-4Ti and V-10Cr-5Ti alloys were determined at 600{degrees}C. The impurity composition and microstructural characteristics of creep-tested specimens were analyzed and correlated with the measured creep properties. The results of these tests show that V-4Cr-4Ti, which contains impurity compositions typical of a commercially fabricated vanadium-based alloy, exhibits creep strength substantially superior to that of V-20Ti, HT-9, or Type 316 stainless steel. The V-10Cr-5Ti alloy exhibits creep strength somewhat higher than that of V-4Cr-4Ti. 9 refs., 7 figs., 2 tabs.

  9. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries

    Science.gov (United States)

    Zhao, Tingkai; She, Shengfei; Ji, Xianglin; Guo, Xinai; Jin, Wenbo; Zhu, Ruoxing; Dang, Alei; Li, Hao; Li, Tiehu; Wei, Bingqing

    2016-01-01

    The development of high capacity and long-life lithium-ion batteries is a long-term pursuing and under a close scrutiny. Most of the researches have been focused on exploring electrode materials and structures with high store capability of lithium ions and at the same time with a good electrical conductivity. Thermal conductivity of an electrode material will also have significant impacts on boosting battery capacity and prolonging battery lifetime, which is, however, underestimated. Here, we present the development of an expanded graphite embedded with Al metal nanoparticles (EG-MNPs-Al) synthesized by an oxidation-expansion process. The synthesized EG-MNPs-Al material exhibited a typical hierarchical structure with embedded Al metal nanoparticles into the interspaces of expanded graphite. The parallel thermal conductivity was up to 11.6 W·m−1·K−1 with a bulk density of 453 kg·m−3 at room temperature, a 150% improvement compared to expanded graphite (4.6 W·m−1·K−1) owing to the existence of Al metal nanoparticles. The first reversible capacity of EG-MNPs-Al as anode material for lithium ion battery was 480 mAh·g−1 at a current density of 100 mA·g−1, and retained 84% capacity after 300 cycles. The improved cycling stability and system security of lithium ion batteries is attributed to the excellent thermal conductivity of the EG-MNPs-Al anodes. PMID:27671848

  10. Highly porous ZnS microspheres for superior photoactivity after Au and Pt deposition and thermal treatment

    Energy Technology Data Exchange (ETDEWEB)

    Singla, Shilpa; Pal, Bonamali, E-mail: bpal@thapar.edu

    2013-11-15

    Graphical abstract: Highly porous ZnS microsphere of size 2–5 μm having large surface area ca. 173.14 m{sup 2} g{sup −1} exhibits superior photocatalytic activity for the oxidation of 4-nitrophenol under UV light irradiation. The rate of photooxidation has been significantly improved by Au and Pt deposition and after sintering, respectively, due to rapid electron acceptance by metal from photoexcited ZnS and growth of crystalline ZnS phase. - Highlights: • Photoactive ZnS microsphere of size 2–5 μm was prepared by hydrothermal route. • Highly porous cubic spherical ZnS crystals possess a large surface area, 173 m{sup 2} g{sup −1}. • 1 wt% Au and Pt photodeposition highly quenched the photoluminescence at 437 nm. • Sintering and metal loading notably improve the photooxidation rate of 4-nitrophenol. • Pt co-catalyst always exhibits superior photoactivity of ZnS microsphere than Au. - Abstract: This work highlights the enhanced photocatalytic activity of porous ZnS microspheres after Au and Pt deposition and heat treatment at 500 °C for 2 h. Microporous ZnS particles of size 2–5 μm with large surface area 173.14 m{sup 2} g{sup −1} and pore volume 0.0212 cm{sup 3} g{sup −1} were prepared by refluxing under an alkaline medium. Photoluminescence of ZnS at 437 nm attributed to sulfur or zinc vacancies were quenched to 30% and 49%, respectively, after 1 wt% Au and Pt loading. SEM images revealed that each ZnS microparticle consist of several smaller ZnS spheres of size 2.13 nm as calculated by Scherrer's equation. The rate of photooxidation of 4-nitrophenol (10 μM) under UV (125 W Hg arc–10.4 mW/cm{sup 2}) irradiation has been significantly improved by Au and Pt deposition followed by sintering due to better electron capturing capacity of deposited metals and growth of crystalline ZnS phase with less surface defects.

  11. Mechanical properties testing and results for thermal barrier coatings

    Energy Technology Data Exchange (ETDEWEB)

    Cruse, T.A.; Johnsen, B.P.; Nagy, A.

    1995-10-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  12. Mechanical properties testing and results for thermal barrier coatings

    Science.gov (United States)

    Cruse, Thomas A.; Johnsen, B. P.; Nagy, Andrew

    1995-01-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  13. Optical Property Evaluation of Next Generation Thermal Control Coatings

    Science.gov (United States)

    Jaworske, Donald A.; Deshpande, Mukund S.; Pierson, Edward A.

    2010-01-01

    Next generation white thermal control coatings were developed via the Small Business Innovative Research program utilizing lithium silicate chemistry as a binder. Doping of the binder with additives yielded a powder that was plasma spray capable and that could be applied to light weight polymers and carbon-carbon composite surfaces. The plasma sprayed coating had acceptable beginning-of-life and end-of-live optical properties, as indicated by a successful 1.5 year exposure to the space environment in low Earth orbit. Recent studies also showed the coating to be durable to simulated space environments consisting of 1 keV and 10 keV electrons, 4.5 MeV electrons, and thermal cycling. Large scale deposition was demonstrated on a polymer matrix composite radiator panel, leading to the selection of the coating for use on the Gravity Recovery And Interior Laboratory (GRAIL) mission.

  14. Mechanical and Thermal Properties of Polysiloxanes and NBR Blend Elastomer

    Institute of Scientific and Technical Information of China (English)

    WANG Yanbing; HUANG Zhixiong; ZHANG Lianmeng; MEI Qilin

    2006-01-01

    A series of elastomers, based on NBR, polysiloxanes (PS) were prepared and characterized by tensile tests, thermogravimetry (TG) and differential scanning calorimetry ( DSC ). Two kinds of vulcanizing agent, DMDBH ( 2 , 5- dimethyl- 2 , 5- di ( t- batyl perory ) hexane ) and DCP ( dicumylperoxide ) were used to investigate the irfluence of different vulcanizing agents on properties of PS/NBR. The addition of PS to NBR was found to improve the thermal stability and decrease the tensile strength of NBR. The tensile strength decreased considerably while the elongation at break increased obviously with the increase of PS content. The series using DMDBH as vulcanizing agent showed a higher tensile strength and elongation at break than the series using DCP as vulcanizing agent. Simultaneity the thermal stability increased with the increase of PS content.

  15. Magnetic properties related to thermal treatment of pyrite

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Detailed rock magnetic experiments were conducted on high-purity natural crystalline pyrite and its products of thermal treatments in both argon and air atmospheres. In argon atmosphere (reducing environment), the pyrite is altered by heating to magnetite and pyrrhotite; the latter is stable in argon atmosphere, and has coercive force and coercivity of remanence of ~20 and ~30 mT, respectively. Whereas in air, the pyrite is ultimately oxidized to hematite. First order reversal curve (FORC) diagram of the end product shows that the remanence coercivity of hematite is up to ~1400 mT. The corresponding thermal transformation process of pyrite in air can be simply summarized as pyrite→ pyrrhotite→magnetite→hematite. These results are helpful for understanding of sedimentary magnetism, secondary chemical remanence and meteorolite magnetic properties.

  16. Magnetic properties related to thermal treatment of pyrite

    Institute of Scientific and Technical Information of China (English)

    WANG Lei; PAN YongXin; LI JinHua; QIN HuaFeng

    2008-01-01

    Detailed rock magnetic experiments were conducted on high-purity natural crystalline pyrite and its products of thermal treatments in both argon and air atmospheres. In argon atmosphere (reducing environment), the pyrite is altered by heating to magnetite and pyrrhotite; the latter is stable in argon atmosphere, and has coercive force and coercivity of remanence of ~20 and ~30 mT, respectively.Whereas in air, the pyrite is ultimately oxidized to hematite. First order reversal curve (FORC) diagram of the end product shows that the remanence coercivity of hematite is up to ~1400 mT. The corresponding thermal transformation process of pyrite in air can be simply summarized as pyrite→pyrrhotite→magnetite→hematite. These results are helpful for understanding of sedimentary magnetism, secondary chemical remanence and meteorolite magnetic properties.

  17. Evaluation of the Mechanical and Thermal Properties of Coffee Tree Wood Flour - Polypropylene Composites

    Directory of Open Access Journals (Sweden)

    Brent H. Tisserat

    2014-06-01

    Full Text Available Columbian coffee trees are subject to frequent replacement plantings due to disease and local climate changes, which makes them an ideal source of wood fibers for wood plastic composites (WPC. Composites of polypropylene (PP consisting of 25% and 40% by weight of coffee wood flour (CF and 0% or 5% by weight of maleated PP (MAPP were produced by twin screw compounding and injection molding. Composites containing MAPP had significantly improved tensile and flexural properties compared to neat PP or composites without MAPP. Excellent mechanical properties were obtained with CF relative to conventional wood fillers. IZOD impact resistances of CF composites were significantly lower than neat PP although WPC containing MAPP were superior to WPC without MAPP. Bio-based fiber composites made by mixing CF in equal portions with other fiber sources were evaluated to determine the compatibility of using CF with other sources of filler materials. Soaking of tensile bars of the various CF blends in distilled water for 35 days may alter their mechanical properties and result in weight gain. Differential scanning calorimetry and thermogravimetric analysis were conducted on the neat PP and bio-composites to evaluate their thermal properties as they relate to potential degradation during conventional thermoplastic resin processing.

  18. Experimental measurements of thermal properties for Mexican building materials to simulate thermal behavior to save energy

    Energy Technology Data Exchange (ETDEWEB)

    Chavez-Galan, Jesus; Almanza, Rafael; Rodriguez, Neftali [Universidad Nacional Autonoma de Mexico (Mexico). Inst. de Ingenieria

    2008-07-01

    One of the main factors that determine the reliability of building's thermal design is the values of thermal and heat transfer properties used during this process. In order to optimizing such thermal design process, there is little information available of the most utilized building materials in Mexico; hence, some measurements were carried out. We present thermal conductivity experimental results for: red brick, tepetate, adobe and concrete. Furthermore, experimental data of convective heat transfer coefficients are reported on: red brick, tepetate, adobe and concrete walls. Kondratyev methodology was used for thermal conductivity estimations. Kondratyev methodology is based on the cooling off of bodies in regular state analysis. Thermal conductivity values were: red brick k{sub L} = 0.906 W/mC, tepetate k{sub T} = 0.648 W/mC, adobe k{sub A} = 0.570 W/mC, and concrete k{sub C} = 1.918 W/mC. Red brick, tepetate, adobe and concrete test walls of 0.46 x 0.56 and 0.06 m thick, were manufactured, as well as a prototype of testing for mounting the walls, in order to evaluate their convective heat transfer coefficients. Measurements were carried out at the Institute of Engineering-UNAM Wind-Tunnel, for an air velocities interval of 2-10 m/s. Reported values for convective coefficients fluctuate on 16-134 W/m{sup 2}2 C, depending on material and position wall, as well as air velocity. (orig.)

  19. Assessment of the Impact of the Measurement Precision of Thermal Properties of Materials on the Prediction of Their Thermal Behaviour

    Science.gov (United States)

    Khatun, Ayesha

    The thermal properties of the sidewall lining materials are capturing attention since the last two decades. Good prediction of the dynamic thermal behaviour of Hall Heroult cells, including precise estimation of energy losses and location of the side ledge formed by the solidification of electrolytic bath, is made possible when the sidelining materials are well characterized in function of temperature. The present work aim at measuring the thermal diffusivity, heat capacity and thermal conductivity of silicon carbide (SiC), graphitic and graphitized carbon materials and cryolite (Na3AlF 6) based on transient characterization techniques. The thermal diffusivity and the heat capacity are measured by using state-of-the-art transient laser flash analyzer and differential scanning calorimeter respectively. The thermal conductivity is calculated by assuming a constant density. The range of precision error for each thermal property is also calculated for a finite number of data sets. Empirical correlation has been drawn for each of the properties to describe the relation with temperature in mathematical terms. Thermal characterization of the latent heat evolved during the melting of ledge is also carried out. Finally, based on the calculations conducted with a 2-D numerical model, the effect of the precision errors of temperature varying thermal properties of the sidewall materials and ledge on the dynamic behaviour of a laboratory scale phase change reactor is also presented. The results, so obtained, encourage further studies on the thermal properties of materials used in the aluminium reduction cell to find out the thermal environment inside the cell, heat loss estimation and effect of the additives on the location of ledge. Key words: Thermal conductivity, thermal diffusivity, heat capacity, temperature varying properties, precision error, phase change profile, latent heat.

  20. Hemp Thermal Insulation Concrete with Alternative Binders, Analysis of their Thermal and Mechanical Properties

    Science.gov (United States)

    Sinka, M.; Sahmenko, G.; Korjakins, A.; Radina, L.; Bajare, D.

    2015-11-01

    One of the main challenges that construction industry faces today is how to address the demands for more sustainable, environmentally friendly and carbon neutral construction materials and building upkeep processes. One of the answers to these demands is lime-hemp concrete (LHC) building materials - carbon negative materials that have sufficient thermal insulation capabilities to be used as thermal insulation materials for new as well as for existing buildings. But one problem needs to be overcome before these materials can be used on a large scale - current manufacturing technology allows these materials to be used only as self-bearing thermal insulation material with large labour intensity in the manufacturing process. In order to lower the labour intensity and allow the material to be used in wider applications, a LHC block and board production is necessary, which in turn calls for the binders different from the classically used ones, as they show insufficient mechanical strength for this new use. The particular study focuses on alternative binders produced using gypsum-cement compositions ensuring they are usable in outdoor applications together with hemp shives. Physical, mechanical, thermal and water absorption properties of hemp concrete with various binders are addressed in the current study.

  1. The thermal properties of a carbon nanotube-enriched epoxy: Thermal conductivity, curing, and degradation kinetics

    KAUST Repository

    Ventura, Isaac Aguilar

    2013-05-31

    Multiwalled carbon nanotube-enriched epoxy polymers were prepared by solvent evaporation based on a commercially available epoxy system and functionalized multiwalled carbon nanotubes (COOH-MWCNTs). Three weight ratio configurations (0.05, 0.5, and 1.0 wt %) of COOH-MWCNTs were considered and compared with neat epoxy and ethanol-treated epoxy to investigate the effects of nano enrichment and processing. Here, the thermal properties of the epoxy polymers, including curing kinetics, thermal conductivity, and degradation kinetics were studied. Introducing the MWCNTs increased the curing activation energy as revealed by differential scanning calorimetry. The final thermal conductivity of the 0.5 and 1.0 wt % MWCNT-enriched epoxy samples measured by laser flash technique increased by up to 15% compared with the neat material. The activation energy of the degradation process, investigated by thermogravimetric analysis, was found to increase with increasing CNT content, suggesting that the addition of MWCNTs improved the thermal stability of the epoxy polymers. © 2013 Wiley Periodicals, Inc.

  2. Carbon nanotube glycol nanofluids: Photo-thermal properties, thermal conductivities and rheological behavior

    Institute of Scientific and Technical Information of China (English)

    Zhaoguo Meng; Daxiong Wu; Liangang Wang; Haitao Zhu; Qingling Li

    2012-01-01

    The efficiency and effectiveness of solar energy capture and storage are to a large extent functions of the heat transfer and storage capacity of the medium used.This paper investigates the potential of using carbon nanotube (CNT)-glycol nanosuspension as such a medium,prepared by freeze dryingultrasonic dispersing after oxidation treatment with HNO3.The influences of the mass fraction of CNTs glycol nanofluids and temperatures on photo-thermal properties,thermal conductivities and rheological behavior were investigated.The results show that CNTs with oxidation treatment exhibited good dispersing performance.Strong optical absorption of the CNTs glycol nanofluids was detected in the range of 200-2500 nm.At room temperature,18% enhancement was found in the photo-thermal conversion efficiency of the 0.5% mass fraction CNTs glycol nanofluids in comparison to the basic fluids,without significant increase in viscosity.At 55 ℃,CNTs glycol nanofluids with 4.0% mass fraction exhibited much lower viscosity and 25.4% higher thermal conductivity in comparison to that of pure glycol at room temperature.

  3. Investigation on Thermal Properties of Composite of Rice Husk, Corncob and Baggasse for Building Thermal Insulation

    Directory of Open Access Journals (Sweden)

    Kyauta E.E. Dauda D.M

    2014-12-01

    Full Text Available The thermal properties of some Agricultural waste ( Rice Husk, Bagasse and Corncob was investigated with the purpose of determining their use as insulators. Using varied composite percentages of each sample wastes at increasing and decreasing quantities to determine best mixtures has assisted in accurate recommendation. The work has explored the potentials for using composite samples of Rice Husk, Bagasse and Corncob as materials for thermal insulation, a solution which offers a reduction in resource use, promote recycle of the wastes, less dependent on toxic chemical types in wood/cellulose based insulators, in addition to reducing energy consumed by altering internal air conditions.The criteria for evaluation includes experimental determination of Thermal Conductivities and Specific Heat Capacities for composites samples and other dependable properties.The results from evaluations have identified that sample G with 0.231Wm-1 k -1 and 22.114m-1 is the best mixed with more rice husk and considerable percentage of bagasse to less percentage of corncob

  4. Nanofluid enhancement of mineral oil and thermal properties instrument design

    Science.gov (United States)

    Wilborn, Eli

    thermal conductivities of various fluids. The second design calculated a thermal conductivity of water to be 0.59W/m2 c', while the commonly accepted value is 0.58W/ m2c', which is well within a tolerable range of error to accept this value as accurate at the experimental conditions. This heat transfer cell also calculated the thermal conductivity value for AMSOIL synthetic motor oil to be 0.12W/m2 c and 0.10W/m2c for mineral oil, both of these values are within the expected ranges of thermal conductivity for oils. The second goal of applying the heat transfer enhancement properties of a nanofluid to a transformer cooling application proved to be futile for Copper Oxide(40nm) and Carbon coated Copper nanoparticles(25nm) in mineral oil. All of the attempted nanofluids fell out of suspension within a timeframe of a day, and in a transformer cell where natural convection is the only means of flow available that contributes to keeping the nanoparticles suspended, there is not enough flow to keep the nanoparticles from falling out of suspension. That is why unless the transformer industry moves towards another coolant besides mineral oil, heat transfer enhancement using Copper Oxide (40nm) or Carbon Coated nanoparticles (25nm) in a mineral oil nanofluid is not a viable option.

  5. Thermal Properties of Polyimide Composites with Nanostructured Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Alyona Igorevna Wozniak

    2016-12-01

    Full Text Available A series of polyimide composites reinforced with different loadings of silicon carbide (SiC nanoparticles are prepared by in-situ polymerization technique. The polyimide (PI matrix resin is derived from 4,4’-oxydianiline (4,4’-ODA and pyromelliticdianhydride (PMDA. The dispersions of SiC nanoparticles are prepared via ultrasonic irradiation or mechanical homogenization. In this method, the SiC nanoparticles are dispersed in diamine solution followed by polymerization with dianhydride. The composites obtained under sonication were found to have lower thermal properties than composites prepared under homogenization.

  6. Investigation of thermal properties of PUF/clay nanocomposites

    Science.gov (United States)

    Doğar, Çetin; Gürses, Ahmet; Karaca, Semra; Köktepe, Sevda; Mindivan, Ferda; Güneş, Kübra

    2014-11-01

    This study aims to investigate the thermal properties of phenol-urea-formaldehyde (PUF)/organoclay nanocomposites synthesized at various organoclay ratios by using their DSC thermograms, FT-IR spectra, and HRTEM images. From these analyses, it has been concluded that at low organoclay ratios, the platelets exfoliated of organoclay, which dispersed homogenously in the polymer matrix, created a positive effect in conformational arrangement as suitable to crystallization of PUF chains. DSC analyses revealed that two endotherms in all thermograms imply the presence of linear UF, PF, and PUF chains together. Low organoclay content may also lead to a cross-linked lattice, being more predominant than the linear chain arrangement.

  7. Polymer nanocomposites with enhanced thermal and mechanical properties

    Science.gov (United States)

    Si, Mayu

    Flame-retardant Elvacite acrylic resin/Cloisite 6A nanocomposites were prepared via direct melt intercalation. Transmission electron microscopy (TEM) micrographs showed that the high degree of exfoliation occurred, which resulted in a large improvement in thermal stability and UV absorption properties without sacrificing optical clarity. Cone calorimetry tests clearly showed that the heat release rate was far lower and more gradual in the nanocomposites than in pure resins. Additionally, Fourier transform infrared (FTIR) spectroscopy results indicated that the introduction of clay did not change the chemical structure of acrylic resins.

  8. A comparison between the effects of sepiolite and silica on mechanical properties and thermal stability of NR/EPDM blend

    Directory of Open Access Journals (Sweden)

    Winya Nattawat

    2016-01-01

    Full Text Available This study focused on improving the ablation properties and mechanical properties of natural rubber (NR/ethylene propylene diene monomer (EPDM blends by using two different commercial fillers: sepiolite and silica. The results showed that sepiolite and silica similarly improved both properties in the loading range of interest (0–12.5 phr. However, sepiolite was superior than silica as using less loading to acheive comparable mechanical and thermal properties. The optimum loading of sepiolite was 5 phr, while that of silica was 10 phr. For both filler systems, the minimum ablation rate found was approximately 0.17 mm/s, and the tensile strength and the hardness of corresponding NR/EPDM composite were improved after modification with sepiolite or silica.Thus, the composite reinforced with sepiolite or silica is suitable for many applications, such as internal insulations of rocket motor.

  9. Magnetic Properties and Thermal Entanglement on a Triangulated Kagome Lattice

    CERN Document Server

    Ananikian, N S; Chakhmakhchyan, L A; Kocharian, A N

    2011-01-01

    The magnetic and entanglement thermal (equilibrium) properties in spin-1/2 Ising-Heisenberg model on a triangulated Kagome lattice are analyzed by means of variational mean-field like treatment based on Gibbs-Bogoliubov inequality. Because of the separable character of Ising-type exchange interactions between the Heisenberg trimers the calculation of quantum entanglement in a self-consistent field can be performed for each of the trimers individually. The concurrence in terms of three qubit isotropic Heisenberg model in effective Ising field is non-zero even in the absence of a magnetic field. The magnetic and entanglement properties exhibit common (plateau and peak) features observable via (antferromagnetic) coupling constant and external magnetic field. The critical temperature for the phase transition and threshold temperature for concurrence coincide in the case of antiferromagnetic coupling between qubits. The existence of entangled and disentangled phases in saturated and frustrated phases is establishe...

  10. Physicochemical, thermal and functional properties of gamma irradiated chickpea starch.

    Science.gov (United States)

    Bashir, Khalid; Aggarwal, Manjeet

    2017-04-01

    The study was conducted to evaluate the effect of gamma irradiation (0, 0.5, 1, 2.5, 5 and 10kGy) on physicochemical, functional and thermal properties of chickpea starch. Results revealed that the pasting properties showed a significant (p≤0.05) decrease in peak viscosity, final viscosity, setback viscosity, trough viscosity and pasting temperature in dose dependent manner. Swelling, solubility index, oil absorption capacity and water absorption capacity increased significantly with dose, while as syneresis decreased with dose. Gelatinization temperatures To, Tp and Tc decreased significantly with dose. X-ray diffraction showed a characteristic C type pattern of the starches and the crystallinity decreased with dose. Scanning electron microscopy revealed small oval shaped starch granules and slight surface fissures were seen in the irradiated starch treated with 5 and 10kGy. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. High-field thermal transports properties of REBCO coated conductors

    CERN Document Server

    Bonura, M

    2015-01-01

    The use of REBCO coated conductors is envisaged for many applications, extending from power cables to high-field magnets. Whatever the case, thermal properties of REBCO tapes play a key role for the stability of superconducting devices. In this work, we present the first study on the longitudinal thermal conductivity (k) of REBCO coated conductors in magnetic fields up to 19 T applied both parallelly and perpendicularly to the thermal-current direction. Copper-stabilized tapes from six industrial manufacturers have been investigated. We show that zero-field k of coated conductors can be calculated with an accuracy of ‡ 15% from the residual resistivity ratio of the stabilizer and the Cu/non-Cu ratio. Measurements performed at high fields have allowed us to evaluate the consistency of the procedures generally used for estimating in-field k in the framework of the Wiedemann-Franz law from an electrical characterization of the materials. In-field data are intended to provide primary ingredients for the ...

  12. Preparation, Thermal Stability and Electrochemical Properties of LiODFB

    Institute of Scientific and Technical Information of China (English)

    Hongming Zhou; Furong Liu; Jian Li

    2012-01-01

    Lithium oxalyldifluoroborate (LiODFB) was synthesized in dimethyl carbonate solvent and purified by the method of solvent-out crystallization. The structure characterization and thermal stability of LiODFB were performed by Fourier transform infrared (FTIR) spectrometry, nuclear magnetic resonance (NMR) spectrometry and thermogravimetric analyzer (TGA). LiODFB was exposed to 50% humid air at 25 ℃for different time, then dried at 80 ℃ for 12 h, and the electrochemical properties of the cells using 1 mol/L dried LiODFB in ethylene carbonate -I- dimethyl carbonate + ethyl(methyl)carbonate were investigated. The results showed that, pure crystallization LiODFB was obtained; it had good thermal stability with a thermal decomposition temperature of 248 ℃; when it was exposed to humid air, it was firstly converted into LiODFB.H20; with increasing exposure time, more and stronger impurity peaks in the X-ray diffraction (XRD) patterns of LiODFB were observed, and both the discharge specific capacity and the capacity retention decreased gradually.

  13. Nanobioceramic Composites: A Study of Mechanical, Morphological, and Thermal Properties

    Directory of Open Access Journals (Sweden)

    Sivabalan Sasthiryar

    2013-12-01

    Full Text Available The aim of this study was to explore the incorporation of biomass carbon nanofillers (CNF into advanced ceramic. Biomass from bamboo, bagasse (remains of sugarcane after pressing, and oil palm ash was used as the predecessor for producing carbon black nanofillers. Furnace pyrolysis was carried out at 1000 °C and was followed by ball-mill processing to obtain carbon nanofillers in the range of 50 nm to 100 nm. CNFs were added to alumina in varying weight fractions and the resulting mixture was subjected to vacuum sintering at 1400 °C to produce nanobioceramic composites. The ceramic composites were characterized for mechanical, thermal, and morphological properties. A high-resolution Charge-coupled device (CCD camera was used to study the fracture impact and the failure mechanism. An increase in the loading percentage of CNFs in the alumna decreased the specific gravity, vickers hardness (HV, and fracture toughness values of the composite materials. Furthermore, the thermal conductivity and the thermal stability of the ceramic composite increased as compared to the pristine alumina.

  14. Thermal properties of closed-cell aluminum foam with circular pores

    Directory of Open Access Journals (Sweden)

    Lu Guo-Yun

    2014-01-01

    Full Text Available The thermal property of closed-cell aluminum foam is studied numerically and the effects of the distribution of the circular pore on the thermal property are studied theoretically. When the convection and radiation are ignored, the effects of porosity, cell size, and distribution forms of pore on the apparent thermal conductivity are investigated. Moreover, the effects of air in the pore on the thermal property are analyzed as well. Simulation results show that apparent thermal conductivity linearly increases with the increase of porosity, while the cell size and the distribution have negligible effects on the thermal property. By comparison, thermal conductivity of air has slight effect on thermal property of foamed aluminum in the context of small size pore.

  15. Properties of thermally stable PM Al-Cr based alloy

    Energy Technology Data Exchange (ETDEWEB)

    Vojtech, D. [Department of Metals and Corrosion Engineering, Institute of Chemical Technology, Prague, Technicka 5, 166 28 Prague 6 (Czech Republic)], E-mail: Dalibor.Vojtech@vscht.cz; Verner, J. [Department of Metals and Corrosion Engineering, Institute of Chemical Technology, Prague, Technicka 5, 166 28 Prague 6 (Czech Republic); Serak, J. [Department of Metals and Corrosion Engineering, Institute of Chemical Technology, Prague, Technicka 5, 166 28 Prague 6 (Czech Republic); Simancik, F. [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 831 02 Bratislava 3 (Slovakia); Balog, M. [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 831 02 Bratislava 3 (Slovakia); Nagy, J. [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 831 02 Bratislava 3 (Slovakia)

    2007-06-15

    The presented paper describes properties of Al-6.0 wt.%Cr-2.3 wt.%Fe-0.4 wt.%Ti-0.7 wt.%Si alloy produced by powder metallurgy (PM). The powder alloy was prepared by the pressure nitrogen melt atomization. The granulometric powder fraction of less than 45 {mu}m was then hot-extruded at 450 deg. C to produce a rod of 6 mm in diameter. Microstructure of the as-extruded material was composed of recrystallized {alpha}(Al) grains (the average grain size of 640 nm) and Al{sub 13}Cr{sub 2} spheroids (the average particle diameter of 130 nm and interparticle spacing of 290 nm). Metastable phases were not observed due to their decomposition on the hot extrusion. Hardness of the as-extruded material was 108 HV1, ultimate tensile strength, 327 MPa, yield strength, 258 MPa and elongation, 14%. Mechanical properties resulted mainly from Hall-Petch strengthening. The room-temperature mechanical properties were also measured after a long-term annealing at 400 deg. C. The investigated PM material was compared with the commercial Al-11.8 wt.%Si-0.9 wt.%Ni-1.2 wt.%Cu-1.2 wt.%Mg casting alloy generally applied at elevated temperatures. The PM alloy showed much higher thermal stability, since its room temperature hardness and tensile properties did not degradate significantly even after annealing at 400 deg. C/200 h. In contrast, the hardness and strength of the casting alloy reduced rapidly already after a 30 min annealing. The excellent thermal stability of the investigated PM material was a consequence of very slow diffusivities and low equilibrium solubilities of chromium and iron in solid aluminium.

  16. Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties

    Science.gov (United States)

    Zhao, Lijia; Park, Nokeun; Tian, Yanzhong; Shibata, Akinobu; Tsuji, Nobuhiro

    2016-12-01

    Dynamic recrystallization (DRX) is an important grain refinement mechanism to fabricate steels with high strength and high ductility (toughness). The conventional DRX mechanism has reached the limitation of refining grains to several microns even though employing high-strain deformation. Here we show a DRX phenomenon occurring in the dynamically transformed (DT) ferrite, by which the required strain for the operation of DRX and the formation of ultrafine grains is significantly reduced. The DRX of DT ferrite shows an unconventional temperature dependence, which suggests an optimal condition for grain refinement. We further show that new strategies for ultra grain refinement can be evoked by combining DT and DRX mechanisms, based on which fully ultrafine microstructures having a mean grain size down to 0.35 microns can be obtained without high-strain deformation and exhibit superior mechanical properties. This study will open the door to achieving optimal grain refinement to nanoscale in a variety of steels requiring no high-strain deformation in practical industrial application.

  17. Structural and thermal properties of carboxylic acid functionalized polythiophenes

    Directory of Open Access Journals (Sweden)

    Ariane de França Mescoloto

    2014-01-01

    Full Text Available Polythiophenes functionalized with polar groups at the end of side-chain have emerged as an alternative method to obtain good compatibility between this class of conjugated polymers and electron acceptor compounds. The aim is to prevent phase segregation and to improve the efficiency of the polythiophene technological devices. However, homopolymers synthesized from thiophene rings with high polar groups at the end of the side-chain, such as hydroxyl and carboxylic acid groups, are poorly soluble in common volatile organic solvents. We report on a systematic preparation of copolymers of 3-hexylthiophene (HT and thiophene-3-acetic acid (TAA, using different feed ratios. The chemical structures of the copolymers were confirmed by FTIR and ¹H-NMR. The TAA content in these copolymers were 33, 38 and 54 mol %. HPSEC results did not show any remarkable correlation with TAA contents in the copolymers. In contrast, the thermal analyses showed a decrease in the thermal stability and an increase in rigidity of their backbones, for the copolymers with high amounts of TAA. The solubility and optical property of copolymers were also related to the TAA contents. Thus, the properties of these copolymers can be modulated by a simple control of feed ratio of TAA in the copolymerization.

  18. Measurement of thermal properties of magnetic nanoparticles using infrared thermal microscopy

    DEFF Research Database (Denmark)

    Kim, Jae Young; Chang, Ki Soo; Kook, Myung Ho

    2013-01-01

    Magnetic nanoparticles (MNPs) are considered promising for biomedical applications such as hyperthermia treatment and disease diagnosis owing to their distinctive thermal properties. For these applications, it is essential to screen the temperature distribution in the targeted disease site. This ...... temperature was observed using lock-in thermography for a small amount of MNPs distributed around the lesion. This suggests that the proposed microthermography technique can be used for diagnosis and screening in the early stage of a disease. © 2013 Elsevier B.V. All rights reserved....

  19. Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials

    Energy Technology Data Exchange (ETDEWEB)

    Ahmet Sarl; Hayati Sarl; Adem Onal [Gaziosmanpasa University, Tokat (Turkey). Dept. of Chemistry

    2004-02-01

    The present study deals with two subjects. The first one is to determine the thermal properties of lauric acid (LA)-stearic acid (SA), myristic acid (MA)-palmitic acid (PA) and palmitic acid (PA)-stearic acid (SA) eutectic mixtures as latent heat storage material. The properties were measured by the differential scanning calorimetry (DSC) analysis technique. The second one is to study the thermal reliability of these materials in view of the change in their melting temperatures and latent heats of fusion with respect to repeated thermal cycles. For this aim, the eutectic mixtures were subjected to 360 repeated melt/freeze cycles, and their thermal properties were measured after 0, 90,1 80 and 360 thermal cycles by the technique of DSC analysis. The DSC thermal analysis results show that the binary systems of LA-SA in the ratio of 75.5:24.5 wt.%, MA-PA in the ratio of 58:42 wt.% and PA-SA in the ratio of 64.2:35.8 wt.% form eutectic mixtures with melting temperatures of 37.0, 42.60 and 52.30{sup o}C and with latent heats of fusion of 182.7, 169.7 and 181.7 J g{sup -1}, respectively. These thermal properties make them possible for heat storage in passive solar heating applications with respect to climate conditions. The accelerated thermal cycle tests indicate that the changes in the melting temperatures and latent heats of fusion of the studied eutectic mixtures are not regular with increasing number of thermal cycles. However, these materials, latent heat energy storage materials, have good thermal reliability in terms of the change in their thermal properties with respect to thermal cycling for about a one-year utility period. (author)

  20. Nano-Localized Thermal Analysis and Mapping of Surface and Sub-Surface Thermal Properties Using Scanning Thermal Microscopy (SThM).

    Science.gov (United States)

    Pereira, Maria J; Amaral, Joao S; Silva, Nuno J O; Amaral, Vitor S

    2016-12-01

    Determining and acting on thermo-physical properties at the nanoscale is essential for understanding/managing heat distribution in micro/nanostructured materials and miniaturized devices. Adequate thermal nano-characterization techniques are required to address thermal issues compromising device performance. Scanning thermal microscopy (SThM) is a probing and acting technique based on atomic force microscopy using a nano-probe designed to act as a thermometer and resistive heater, achieving high spatial resolution. Enabling direct observation and mapping of thermal properties such as thermal conductivity, SThM is becoming a powerful tool with a critical role in several fields, from material science to device thermal management. We present an overview of the different thermal probes, followed by the contribution of SThM in three currently significant research topics. First, in thermal conductivity contrast studies of graphene monolayers deposited on different substrates, SThM proves itself a reliable technique to clarify the intriguing thermal properties of graphene, which is considered an important contributor to improve the performance of downscaled devices and materials. Second, SThM's ability to perform sub-surface imaging is highlighted by thermal conductivity contrast analysis of polymeric composites. Finally, an approach to induce and study local structural transitions in ferromagnetic shape memory alloy Ni-Mn-Ga thin films using localized nano-thermal analysis is presented.

  1. Facile one-pot synthesis of spherical zinc sulfide-carbon nanocomposite powders with superior electrochemical properties as anode materials for Li-ion batteries.

    Science.gov (United States)

    Jang, Yong Seung; Kang, Yun Chan

    2013-10-21

    A novel and simple one-pot method of systematically synthesizing spherical metal sulfide-carbon composite powders is reported for the first time. The zinc sulfide-carbon composite is selected as the first target material. The prepared composite powders show superior electrochemical properties as anode materials for lithium-ion batteries.

  2. Thermal dependence of passive electrical properties of lizard muscle fibres.

    Science.gov (United States)

    Adams, B A

    1987-11-01

    1. The thermal dependence of passive electrical properties was determined for twitch fibres from the white region of the iliofibularis (IF) muscle of Anolis cristatellus (15-35 degrees C) and Sceloporus occidentalis (15-40 degrees C), and for twitch fibres from the white (15-45 degrees C) and red (15-40 degrees C) regions of the IF of Dipsosaurus dorsalis. These species differ in thermal ecology, with Anolis being the least thermophilic and Dipsosaurus the most thermophilic. 2. Iliofibularis fibres from the three species reacted similarly to changing temperature. As temperature was increased, input resistance (Rin) decreased (average R10 = 0.7), length constant (L) decreased (average R10 = 0.9), time constant (tau) decreased (average R10 = 0.8), sarcoplasmic resistivity (Rs) decreased (average R10 = 0.8) and apparent membrane resistance (Rm) decreased (average R10 = 0.7). In contrast, apparent membrane capacitance (Cm) increased with increasing temperature (average R10 = 1.3). 3. Rin, L, tau and apparent Rm were lowest in fibres from Anolis (the least thermophilic species) and highest in fibres from Dipsosaurus (the most thermophilic species). Anolis had the largest and Dipsosaurus the smallest diameter fibres (126 and 57 micron, respectively). Apparent Cm was highest in fibres from Sceloporus, which had fibres of intermediate diameter (101 micron). Rs did not differ significantly among species. 4. The effect of temperature on the passive electrical properties of these lizard fibres was similar to that reported for muscle fibres from other ectothermic animals (crustaceans, insects, fish and amphibians) but qualitatively different from that reported for some mammalian (cat tenuissimus, goat intercostal) fibres. The changes that occur in the passive electrical properties render the fibres less excitable as temperature increases.

  3. Thermal, dielectric and structural properties of Enceladus' leading face

    Science.gov (United States)

    Le Gall, Alice; Bonnefoy, Léa; Leyrat, Cedric; Janssen, Michael A.

    2016-10-01

    The Cassini RADAR was initially designed to examine the surface of Titan through the veil of its optically-opaque atmosphere. However, it is occasionally used to observe airless Saturn's moons from long range and, less frequently, during targeted flybys. In particular, the 16th targeted encounter of Enceladus (Nov. 6, 2011, flyby E16) was dedicated to the RADAR instrument which then acquired data for over 4 hours. This paper focuses on the mid-resolution (0.1-0.6REnceladus) and low-resolution polarized data (0.6-1.0REnceladus) collected during the E16 flyby in the radiometry mode of the RADAR, mainly on the leading side of the moon.In its passive mode, the RADAR records the thermal emission at 2-cm wavelength from, likely, the first meters of an icy surface. Ries and Janssen (2015) first analyzed the E16 mid-resolution radiometry observation and reported on a large-scale emissivity anomaly, possibly associated with the seemingly young tectonized Leading Hemisphere Terrain mapped by Crow-Willard and Pappalardo (2015). With the goal of further investigating the extension of the anomaly region and providing constrains on the thermal, dielectric and structural properties of Enceladus' near surface, we have re-examined this dataset as well as observations acquired in two orthogonal polarizations with the help of a thermal model. This thermal model accounts for both diurnal and seasonal variations of the incident flux, including eclipses which is of importance for the E16 observations partially occurred during a solar eclipse by Saturn.Preliminary results suggest that the average thermal inertia of the near surface of Enceladus' leading face is relatively low, as low as 40 Jm-2K-1s-1/2 . This value does not depart much from the one inferred from measurements in the IR suggesting that the surface of Enceladus is covered by a very porous regolith, at least a few meters thick. In agreement, with this interpretation, the degree of volume scattering (i.e., high

  4. Non-destructive thermal wave method applied to study thermal properties of fast setting time endodontic cement

    Energy Technology Data Exchange (ETDEWEB)

    Picolloto, A. M.; Mariucci, V. V. G.; Szpak, W.; Medina, A. N.; Baesso, M. L.; Astrath, N. G. C.; Astrath, F. B. G.; Bento, A. C., E-mail: acbento@uem.br [Departamento de Física, Grupo de Espectroscopia Fotoacústica e Fototérmica, Universidade Estadual de Maringá – UEM, Av. Colombo 5790, 87020-900 Maringá, Paraná (Brazil); Santos, A. D.; Moraes, J. C. S. [Departamento de Física e Química, Universidade Estadual Paulista Júlio de Mesquita Filho – UNESP, Av. Brasil 56, 15385-000 Ilha Solteira, SP (Brazil)

    2013-11-21

    The thermal wave method is applied for thermal properties measurement in fast endodontic cement (CER). This new formula is developed upon using Portland cement in gel and it was successfully tested in mice with good biocompatibility and stimulated mineralization. Recently, thermal expansion and setting time were measured, conferring to this material twice faster hardening than the well known Angelus Mineral trioxide aggregate (MTA) the feature of fast hardening (∼7 min) and with similar thermal expansion (∼12 μstrain/ °C). Therefore, it is important the knowledge of thermal properties like thermal diffusivity, conductivity, effusivity in order to match thermally the tissue environment upon its application in filling cavities of teeth. Photothermal radiometry technique based on Xe illumination was applied in CER disks 600 μm thick for heating, with prepared in four particle sizes (25, 38, 45, and 53) μm, which were added microemulsion gel with variation volumes (140, 150, 160, and 170) μl. The behavior of the thermal diffusivity CER disks shows linear decay for increase emulsion volume, and in contrast, thermal diffusivity increases with particles sizes. Aiming to compare to MTA, thermal properties of CER were averaged to get the figure of merit for thermal diffusivity as (44.2 ± 3.6) × 10{sup −3} cm{sup 2}/s, for thermal conductivity (228 ± 32) mW/cm K, the thermal effusivity (1.09 ± 0.06) W s{sup 0.5}/cm{sup 2} K and volume heat capacity (5.2 ± 0.7) J/cm{sup 3} K, which are in excellent agreement with results of a disk prepared from commercial MTA-Angelus (grain size < 10 μm using 57 μl of distilled water)

  5. Non-destructive thermal wave method applied to study thermal properties of fast setting time endodontic cement

    Science.gov (United States)

    Picolloto, A. M.; Mariucci, V. V. G.; Szpak, W.; Medina, A. N.; Baesso, M. L.; Astrath, N. G. C.; Astrath, F. B. G.; Santos, A. D.; Moraes, J. C. S.; Bento, A. C.

    2013-11-01

    The thermal wave method is applied for thermal properties measurement in fast endodontic cement (CER). This new formula is developed upon using Portland cement in gel and it was successfully tested in mice with good biocompatibility and stimulated mineralization. Recently, thermal expansion and setting time were measured, conferring to this material twice faster hardening than the well known Angelus Mineral trioxide aggregate (MTA) the feature of fast hardening (˜7 min) and with similar thermal expansion (˜12 μstrain/ °C). Therefore, it is important the knowledge of thermal properties like thermal diffusivity, conductivity, effusivity in order to match thermally the tissue environment upon its application in filling cavities of teeth. Photothermal radiometry technique based on Xe illumination was applied in CER disks 600 μm thick for heating, with prepared in four particle sizes (25, 38, 45, and 53) μm, which were added microemulsion gel with variation volumes (140, 150, 160, and 170) μl. The behavior of the thermal diffusivity CER disks shows linear decay for increase emulsion volume, and in contrast, thermal diffusivity increases with particles sizes. Aiming to compare to MTA, thermal properties of CER were averaged to get the figure of merit for thermal diffusivity as (44.2 ± 3.6) × 10-3 cm2/s, for thermal conductivity (228 ± 32) mW/cm K, the thermal effusivity (1.09 ± 0.06) W s0.5/cm2 K and volume heat capacity (5.2 ± 0.7) J/cm3 K, which are in excellent agreement with results of a disk prepared from commercial MTA-Angelus (grain size < 10 μm using 57 μl of distilled water).

  6. Electrical and Thermal Properties of Mixed Conductors and Superconductors

    Science.gov (United States)

    Thomas, Joyce Albritton

    1995-01-01

    The electrical and thermal properties of three types of electronic materials have been analyzed. Variable -temperature conductivity and thermoelectric power were measured on the following materials: rm V _2O_5 polymer electrolyte nanocomposites, oxygen-deficient rm YBa_2Cu_3O _{x} single crystals, and quaternary chalcogenides, rm K_2Cu_2CeS _4 and rm CsCuCeS_3. Theoretical models were employed to advance the understanding of the conduction mechanisms present in these materials. The sol-gel process has been used to intercalate rm V_2O_5 xerogels with the polymer electrolyte, oxymethylene linked poly(ethylene oxide)-lithium triflate ((a-PEO)_ {n}(LiCF_3SO _3)). The molar ratios of vanadium and lithium to ethylene oxide were varied to examine the effect on the charge transport properties. The V^ {+4} concentration was also increased in an effort to enhance the electrical properties. The conductivity and thermoelectric power data measured parallel to the planes exhibited semiconductor behavior. The thermoelectric power was negative, indicating electrons as the majority charge carriers. Both the conductivity and thermoelectric power data fit a variable-range hopping transport model. Thermoelectric power measurements were performed on various stoichiometries of twinned, rm YBa_2Cu_3O_{x} single crystals. The data were collected along both the ab-plane and c-axis directions to investigate the anisotropic properties of these materials. Several crystals were reoxygenated to either the same x values or different x values. The reoxygenation study was conducted to extend the knowledge of the effect of oxygen content on transport behavior. Theoretical models previously described in the literature were used to examine the conduction mechanisms in the rm YBa_2Cu_3O_{x} single crystals. The quaternary chalcogenides, rm K_2Cu_2CeS_4 and CsCuCeS _3, were also investigated. The amount of Cu present was found to have an effect on the crystal structure of both materials. As a result

  7. Synthesis, Structural Characterization, and Field-Effect Transistor Properties of n-Channel Semiconducting Polymers Containing Five-Membered Heterocyclic Acceptors: Superiority of Thiadiazole Compared with Oxadiazole.

    Science.gov (United States)

    Chen, Huajie; Liu, Zhaoxia; Zhao, Zhiyuan; Zheng, Liping; Tan, Songting; Yin, Zhihong; Zhu, Chunguang; Liu, Yunqi

    2016-12-07

    Five-membered 1,3,4-oxadiazole (OZ) and 1,3,4-thiadiazole (TZ) heterocycle-based copolymers as active layer have long been ignored in solution-processable n-channel polymer field-effect transistors (PFETs) despite the long history of using OZ or TZ derivatives as the electron-injecting materials in organic light-emitting devices and their favorable electron affinities. Herein, we first report the synthesis and PFETs performance of two n-channel conjugated polymers bearing OZ- or TZ-based acceptor moieties, i.e., PNOZ and PNTZ, where simple thiophene units are utilized as the weak donors and additional alkylated-naphthalenediimides units are used as the second acceptors. A comparative study has been performed to reveal the effect of different heterocyclic acceptors on thermal properties, electronic properties, ordering structures, and carrier transport performance of the target polymers. It is found that both polymers possess low-lying LUMO values below -4.0 eV, indicating high electron affinity for both heterocycle-based polymers. Because of strong polarizable ability of sulfur atom in TZ heterocycle, PNTZ exhibits a red shift in maximal absorption and stronger molecular aggregation even in the diluted chlorobenzene solution as compared to the OZ-containing PNOZ. Surface morphological study reveals that a nodule-like surface with a rough surface morphology is observed clearly for PNOZ films, whereas PNTZ films display highly uniform surface morphology with well interconnected fiber-like polycrystalline grains. Investigation of PFETs performance indicates that both polymers afford air-stable n-channel transport characteristics. The uniform morphological structure and compact π-π stacking endow PNTZ with a high electron mobility of 0.36 cm(2) V(-1) s(-1), much higher than that of PNOZ (0.026 cm(2) V(-1) s(-1)). These results manifest the feasibility in improving electron-transporting property simply by tuning heteroatom substitutes in n-channel polymers; further

  8. Correlation between thermal and mechanical properties of hardened steel treated by nitriding process

    Energy Technology Data Exchange (ETDEWEB)

    Ghrib, T; Yacoubi, N, E-mail: taher.ghrib@yahoo.f [Photothermal Laboratory, I PEIN, 8000 Nabeul (Tunisia)

    2010-03-01

    In this work we have studied the nitriding effect for the 42CrMo4 steel on the evolution of their thermal and mechanical properties. The thermal properties are determined by the 'Photothermal Deflection technique' method. It was shown that the thermal conductivity as well as the thermal diffusivity decreases if the nitrogen fraction in steel increases conversely the microhardness increases with the growth of the nitrogen rate. After, we have correlated the thermal and mechanical properties with an empirical equation that permits to determine the microhardness without its measure.

  9. Development of vacuum glazing with advanced thermal properties - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Koebel, M.; Manz, H.

    2009-03-15

    Windows constitute a weak link in the building envelope and hence contribute significantly to the total heating energy demand in buildings. By evacuating the glazing cavity a vacuum glazing is created and heat transfer can be significantly reduced. This project was designed to build knowledge and technology necessary to fabricate vacuum glazing with advanced thermal properties. More specifically, various strategies for improvement of conventional technology were investigated. Of central importance was the development of a novel edge sealing approach which can in theory circumvent the main limitation of conventional glass soldering technology. This approach which is rapid, low temperature, low cost and completely vacuum compatible was filed for patenting in 2008. With regards to thermal insulation performance and glazing deflection, numerical studies were performed demonstrating the importance of nonlinear behavior with glazing size and the results published. A detailed service life prediction model was elaborated which defines a set of parameters necessary to keep the expected pressure increase below a threshold value of 0.1 Pa after 30 years. The model takes into account four possible sources of pressure increase and a getter material which acts as a sink. For the production of 0.5 m by 0.5 m glazing assembly prototypes, a high vacuum chamber was constructed and a first sealing prototype realized therein. The manufacture of improved prototypes and optimization of the anodic bonding edge sealing technology with emphasis on process relevant aspects is the goal of a follow-up project. (authors)

  10. Mechanical, Thermal and Functional Properties of Green Lightweight Foamcrete

    Directory of Open Access Journals (Sweden)

    Md Azree Othuman Mydin

    2012-09-01

    Full Text Available In recent times, the construction industry has revealed noteworthy attention in the use of lightweight foamcrete as a building material due to its many favourable characteristics such as lighter weight, easy to fabricate, durable and cost effective. Foamcrete is a material consisting of Portland cement paste or cement filler matrix (mortar with a homogeneous pore structure created by introducing air in the form of small bubbles. With a proper control in dosage of foam and methods of production, a wide range of densities (400 – 1600 kg/m 3 of foamcrete can be produced thus providing flexibility for application such as structural elements, partition, insulating materials and filling grades. Foamcrete has so far been applied primarily as a filler material in civil engineering works. However, its good thermal and acoustic performance indicates its strong potential as a material in building construction. The focus of this paper is to classify literature on foamcrete in terms of its mechanical, thermal and functional properties.

  11. Cassini CAPS Measurements of Thermal Ion Properties: An Update

    Science.gov (United States)

    Wilson, R. J.; Bagenal, F.; Delamere, P. A.

    2010-12-01

    Since the Wilson et al. [2008] paper on thermal ion properties in Saturn's inner equatorial magnetosphere there have been several advances in forward model techniques and instrument knowledge. These include: a) Improved CAPS (SNG) calibration values since 2008. While the previous fits to data are still valid, this efficiency adjustment has the effect of reducing the density values calculated from that fit. Compared to the previous calibration values, nOH+ and nH+ are ≈30% and ≈9% lower respectively. b) Robust error analysis on the forward model process to produce standard deviations for the fitted parameters. This also shows the expected dependences between various fitted parameters, such as Vφ and OH+ T⊥, inherent in the model. c) Utilization of real magnetic field data to forward model T⊥ and T\\par. Previously assumed magnetic field was in the -z direction. In addition, these improvements allow us to remove the constraint that Vz = 0, and the use of real magnetic field data allows us to analyze data farther from the equator. References Wilson, R. J., R. L. Tokar, M. G. Henderson, T. W. Hill, M. F. Thomsen, and D. H. Pontius (2008), Cassini plasma spectrometer thermal ion measurements in Saturn's inner magnetosphere,

  12. Thermal Properties of Light Tensor Mesons via QCD Sum Rules

    Directory of Open Access Journals (Sweden)

    K. Azizi

    2015-01-01

    Full Text Available The thermal properties of f2(1270, a2(1320, and K2*(1430 light tensor mesons are investigated in the framework of QCD sum rules at finite temperature. In particular, the masses and decay constants of the light tensor mesons are calculated taking into account the new operators appearing at finite temperature. The numerical results show that, at the point at which the temperature-dependent continuum threshold vanishes, the decay constants decrease with amount of (70–85% compared to their vacuum values, while the masses diminish about (60–72% depending on the kinds of the mesons under consideration. The results obtained at zero temperature are in good consistency with the experimental data as well as the existing theoretical predictions.

  13. Surface and Electrical Properties of Electro-Coagulated Thermal Waste

    Science.gov (United States)

    Yesilkaya, S. S.; Okutan, M.; Içelli, O.; Yalçın, Z.

    2015-05-01

    The Electro-Coagulated Thermal Waste (ECTW) sample of the impedance spectroscopy investigation for electrical modulus and conductivity are presented. Electrical properties via temperature and frequency dependent impedance spectroscopy were investigated. Real and imaginary parts of electrical modulus were measured at various frequencies and a related Cole-Cole plot was acquired as well. The surface resistivity of the ECTW was measured by the four-point probe measurement technique, yielding a relatively high surface resistivity. As a result of this study, an effective building shielding material, which is a cost effective alternative, is proposed. The activation energy values were calculated from the Arrhenius plots at different frequencies. The transition region in this plot may be attributed to activation of ionic conductivity at lower temperatures.

  14. Ammonium nitrate emulsion : physical properties and decomposition using thermal methods

    Energy Technology Data Exchange (ETDEWEB)

    Feng, H.; Goldthorp, S.; Singh, S.; Turcotte, R.

    2009-05-15

    This presentation discussed methods of determining the physical properties and decomposition rates of commercial water-based explosives. Ammonium nitrate emulsions can explode when heated to critical temperatures or when a localized thermal energy deposition occurs. An accelerating rate calorimeter (ARC) was used to investigate the emulsion under adiabatic conditions. Simultaneous mass spectroscopy (MS) Fourier Transform Infrared (FTIR) and differential scanning calorimetry (DSC) techniques were used to conduct an evolved gas analysis. Results of the analysis demonstrated that the AN emulsions have ARC onset temperatures of approximately 220 degrees C. The mass loss reaction occurred in 2 steps. The initial step was related to water evaporation and oil phase volatilization. The second step was related to AN decomposition in a closed system, and AN dissociation in an open system. tabs., figs.

  15. Water retention curves and thermal insulating properties of Thermosand

    Science.gov (United States)

    Leibniz, Otto; Winkler, Gerfried; Birk, Steffen

    2010-05-01

    The heat loss and the efficiency of isolating material surrounding heat supply pipes are essential issues for the energy budget of heat supply pipe lines. Until now heat loss from the pipe is minimized by enlarging the polyurethane (PU) - insulation thickness around the pipe. As a new approach to minimize the heat loss a thermally insulating bedding material was developed and investigated. Conventional bedding sands cover all necessary soil mechanical properties, but have a high thermal conductivity from λ =1,5 to 1,7 W/(m K). A newly developed embedding material 'Thermosand' shows thermal properties from λ=0,18 W/(m K) (dry) up to 0,88 W/(m K) (wet). The raw material originates from the waste rock stockpiles of a coal mine near Fohnsdorf, Austria. With high temperatures up to nearly 1000 ° C and a special mineral mixture, a natural burned reddish material resembling clinker arises. The soilmechanical properties of Thermosand has been thoroughly investigated with laboratory testing and in situ investigations to determine compaction-, permeability- and shear-behaviour, stiffness and corresponding physical parameters. Test trenches along operational heat pipes with temperature-measurement along several cross-sections were constructed to compare conventional embedding materials with 'Thermosand'. To investigate the influence of varying moisture content on thermal conductivity a 1:1 large scale model test in the laboratory to simulate real insitu-conditions was established. Based on this model it is planned to develop numerical simulations concerning varying moisture contents and unsaturated soil mechanics with heat propagation, including the drying out of the soil during heat input. These simulations require the knowledge about the water retention properties of the material. Thus, water retention curves were measured using both steady-state tension and pressure techniques and the simplified evaporation method. The steady-state method employs a tension table (sand

  16. Optical properties of rubrene thin film prepared by thermal evaporation

    Institute of Scientific and Technical Information of China (English)

    陈亮; 邓金祥; 孔乐; 崔敏; 陈仁刚; 张紫佳

    2015-01-01

    Rubrene thin films are deposited on quartz substrates and silver nanoparticles (Ag NPs) films by the thermal evapo-ration technique. The optical properties of rubrene thin film are investigated in a spectral range of 190 nm–1600 nm. The analysis of the absorption coefficient (α) reveals direct allowed transition with a corresponding energy of 2.24 eV. The photoluminescence (PL) peak of the rubrene thin film is observed to be at 563 nm (2.21 eV). With the use of Ag NPs which are fabricated by radio-frequency (RF) magnetron sputtering on the quartz, the PL intensity is 8.5 times that of as-deposited rubrene thin film. It is attributed to the fact that the surface plasmon enhances the photoluminescence.

  17. Selected Properties Of Thermally Sprayed Oxide Ceramic Coatings

    Directory of Open Access Journals (Sweden)

    Czupryński A.

    2015-09-01

    Full Text Available The article presents the results of the study on exploitation properties of flame sprayed ceramic coatings produced by oxide ceramic material in the form of powder on the aluminum oxide Al2O3 matrix with 3% titanium oxide TiO2 addition and also on the zirconium oxide (ZrO2 matrix with 30% calcium oxide (CaO on the substrate of unalloyed structural steel of S235JR grade. As a primer powder, metallic powder on the base of Ni-Al-Mo has been applied. Plates with dimensions of 5×200×300 mm and also front surfaces of ∅40×50 mm cylinders have been flame sprayed. Spraying of primer coating has been done using RotoTec 80 torch and external specific coating has been done with CastoDyn DS 8000 torch. Investigations of coating properties are based on metallography tests, phase composition research, measurement of microhardness, coating adhesion to the ground research (acc. to EN 582:1996 standard, abrasive wear resistance (acc. to ASTM G65 standard and erosion wear resistance (acc. to ASTM G76-95 standard and thermal stroke study. Performed tests have shown that the flame spraying with 97%Al2O3 powder containing 3% TiO2 and also by the powder based on zirconium oxide (ZrO2 containing 30% calcium oxide (CaO performed in a wide range of technological parameters allow to obtain high quality ceramic coatings with thickness up to ca. 500 μm on a steel substrate. The primer coating sprayed with the Ni-Al-Mo powder to the steel substrate and external coatings sprayed has the of mechanical bonding character. The coatings are characterized by high adhesion to the substrate and also high erosion and abrasive wear resistance and the resistance for cyclic thermal stroke.

  18. Thermal properties of radiolytically synthesized PVA/Ag nanocomposites

    Directory of Open Access Journals (Sweden)

    Krklješ Aleksandra N.

    2007-01-01

    Full Text Available The radiolytic method was used to synthesize two types of nanocomposites with silver, PVA/Ag by film casting and PVA hydrogel/Ag nanocomposites. This method is particularly suitable for generating metal nanoparticles in solution. The radiolytic species (solvated electrons and secondary radicals exhibit strong reducing properties such that metal ions are reduced at each encounter. Metal atoms then tend to grow into larger clusters. It was found that solid or swollen polymers are able to stabilize small crystallites against spontaneous growth via aggregation. Using differential scanning calorimetry (DSC, the melting behavior and kinetics of the PVA/Ag nanocomposites were investigated and compared to those of pure PVA. The melting as well as crystallization behavior of polymers is crucial because it governs the thermal properties, impact resistance and stress strain properties. Understanding the melting behavior is significant not only to tailor the properties of nanocomposites but to investigate the interactions between the constituents. The DSC curves of pure PVA and prepared nanocomposites show only one melting peak between 175 and 230°C, indicating that the melting behavior of these two systems are analogous. In both cases, with increasing heating rate, the melting peak shifts to a higher temperature, but with increasing Ag content the peak melting temperature is lower. When specimens are heated at high heating rate, the motion of PVA molecular chains cannot follow the heating temperature on time due to the influence of heat hysteresis, which leads to a higher peak melting temperature. When Ag nanoparticles are added they increase the heat transfer among the PVA molecular chains decreasing the melting temperature. The Ag content is a major factor affecting the degree of crystallinity. It was observed that at low nanofiller content, up to the 0.5 wt%, the degree of crystallinity of the nanocomposites increased, while at a higher content the

  19. Effect of thermal cycling of SiC{sub f}/SiC composites on their mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Udayakumar, A., E-mail: audayk@yahoo.com [Materials Science Division, Council of Scientific and Industrial Research – National Aerospace Laboratories, Bangalore-560 017 (India); Stalin, M.; Abhayalakshmi, M.B.; Hariharan, Ramya [Materials Science Division, Council of Scientific and Industrial Research – National Aerospace Laboratories, Bangalore-560 017 (India); Balasubramanian, M., E-mail: mbala@iitm.ac.in [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai-600 036 (India)

    2013-11-15

    SiC{sub f}/SiC composites are class of high temperature structural materials being developed for use in nuclear fusion and fission reactor systems because of their superior high temperature mechanical properties, low radiation damage and low induced radioactivity. Two types of 2D SiC{sub f}/SiC composites were made through isothermal and isobaric chemical vapor infiltration process using eight harness satin-woven ceramic-grades Nicalon™ fibers with boron nitride (BN) interface, namely: one with lower interface thickness and a second type with higher interface thickness. The BN interface was applied to the fiber prior to SiC matrix addition to modify the interfacial bond strength leading to better toughness and improved oxidation resistance. The density achieved was around 2.6 g/cc. The composite specimens were subjected to thermal cycling treatment using an in-house furnace. The mechanical properties such as tensile strength, fracture toughness and interfacial bond strength were also studied for all the composites before and after thermal cycling. It is seen from the results that both composites withstood thermal shocks and thermal cycling treatment. It was also concluded from the present work that good balance between load transfer and crack arresting was established.

  20. Thermal, Mechanical, and Electrical Properties of Graphene Nanoplatelet/Graphene Oxide/ Polyurethane Hybrid Nanocomposite.

    Science.gov (United States)

    Pokharel, Pashupati; Lee, Sang Hyub; Lee, Dai Soo

    2015-01-01

    Hybrid nanocomposites of polyurethane (PU) were prepared by in-situ polymerization of 4,4'- diphenyl methane diisocyanate (MDI) with mixture of graphene oxide (GO) and graphene nanoplatelet (GNP) dispersed in a poly(tetramethylene ether glycol) (PTMEG). Effects of the fillers, GO and GNP, on the thermal, mechanical, and electrical properties of the nanocomposites of PU were investigated. Sonication of the hybrid of GNP and GO with PTMEG enabled effective dispersion of the fillers in the solution than the sonication of GNP alone. The addition of PTMEG in the solution prevented the GNPs from the restacking during the drying process. It was observed that the electrical conductivity and mechanical property of the nanocomposites based on the hybrid of GO and GNP were superior to the nanocomposite based on GNP alone at the same loading of the filler. At the loading of the 3 wt% hybrid filler in PU, we observed the improvement of Young's modulus -200% and the surface resistivity of 10(9.5) ohm/sq without sacrificing the elongation at break.

  1. Thermal, Electrical and Surface Hydrophobic Properties of Electrospun Polyacrylonitrile Nanofibers for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Alarifi

    2015-10-01

    Full Text Available This paper presents an idea of using carbonized electrospun Polyacrylonitrile (PAN fibers as a sensor material in a structural health monitoring (SHM system. The electrospun PAN fibers are lightweight, less costly and do not interfere with the functioning of infrastructure. This study deals with the fabrication of PAN-based nanofibers via electrospinning followed by stabilization and carbonization in order to remove all non-carbonaceous material and ensure pure carbon fibers as the resulting material. Electrochemical impedance spectroscopy was used to determine the ionic conductivity of PAN fibers. The X-ray diffraction study showed that the repeated peaks near 42° on the activated nanofiber film were α and β phases, respectively, with crystalline forms. Contact angle, thermogravimetric analysis (TGA, differential scanning calorimetry (DSC and Fourier transform infrared spectroscopy (FTIR were also employed to examine the surface, thermal and chemical properties of the carbonized electrospun PAN fibers. The test results indicated that the carbonized PAN nanofibers have superior physical properties, which may be useful for structural health monitoring (SHM applications in different industries.

  2. Thermal, Electrical and Surface Hydrophobic Properties of Electrospun Polyacrylonitrile Nanofibers for Structural Health Monitoring.

    Science.gov (United States)

    Alarifi, Ibrahim M; Alharbi, Abdulaziz; Khan, Waseem S; Swindle, Andrew; Asmatulu, Ramazan

    2015-10-14

    This paper presents an idea of using carbonized electrospun Polyacrylonitrile (PAN) fibers as a sensor material in a structural health monitoring (SHM) system. The electrospun PAN fibers are lightweight, less costly and do not interfere with the functioning of infrastructure. This study deals with the fabrication of PAN-based nanofibers via electrospinning followed by stabilization and carbonization in order to remove all non-carbonaceous material and ensure pure carbon fibers as the resulting material. Electrochemical impedance spectroscopy was used to determine the ionic conductivity of PAN fibers. The X-ray diffraction study showed that the repeated peaks near 42° on the activated nanofiber film were α and β phases, respectively, with crystalline forms. Contact angle, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were also employed to examine the surface, thermal and chemical properties of the carbonized electrospun PAN fibers. The test results indicated that the carbonized PAN nanofibers have superior physical properties, which may be useful for structural health monitoring (SHM) applications in different industries.

  3. Anisotropic thermal and electrical properties of thin thermal interface layers of graphite nanoplatelet-based composites

    National Research Council Canada - National Science Library

    Tian, Xiaojuan; Itkis, Mikhail E; Bekyarova, Elena B; Haddon, Robert C

    2013-01-01

    Thermal interface materials (TIMs) are crucial components of high density electronics and the high thermal conductivity of graphite makes this material an attractive candidate for such applications...

  4. Graphite intercalated polyaniline composite with superior anticorrosive and hydrophobic properties, as protective coating material on steel surfaces

    Science.gov (United States)

    Rathnayake, R. M. N. M.; Mantilaka, M. M. M. G. P. G.; Hara, Masanori; Huang, Hsin-Hui; Wijayasinghe, H. W. M. A. C.; Yoshimura, Masamichi; Pitawala, H. M. T. G. A.

    2017-07-01

    Solid polymer composite systems are widely being used for potential technological applications in secondary energy sources and electrochromic devices. In this study, we synthesized and characterized a composite material composed of polyaniline (PANI) and natural needle platy (NPG) vein graphite. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), micro-Raman analysis, thermogravimetric and differential thermal analysis (TGA/DTA), transmission electron microscopy (TEM) were used to study the structural and electrochemical properties of the prepared PANI/NPG graphite composite. XPS, FTIR, and micro-Raman analysis confirmed the existence of relevant functional groups and bonding in the prepared PANI/NPG composite material. The composite shows a very low corrosion rate, approximately 29 μm per year, and high hydrophobicity on steel surfaces, which helps to prevent the corrosion due to O2 penetration towards the metal surface. It indicates that the composite can be used as a high potential surface coating material to anticorrosion. The specific capacitance of PANI/NPG composite is 833.3 F g-1, which is higher than that of PANI. This synergistic electrical performance result proves the prepared PANI/NPG graphite composite as a suitable protective coating material for steel surfaces.

  5. Thermal behavior of thin slab as described by the parabolic microscopic heat conduction model with variable thermal properties

    Energy Technology Data Exchange (ETDEWEB)

    Al-Nimr, Moh' d A.; Naji, Malak; Al-Wardat, Salem A. [Mechanical Engineering Department, Jordan University of Science and Technology, Irbid 22110, P.O. Box 3030 (Jordan)

    2004-02-01

    The thermal behavior of thin slab as described by the parabolic microscopic heat conduction model with variable thermal properties is investigated under two types of heating sources. These types are the unit step and the fluctuating harmonic heating sources. The considered thermal properties are the electron gas C{sub e} and the solid lattice C{sub L} total thermal capacities. It is found that the slab thermal behavior is more sensitive to the variation in C{sub e} as compared to the variation in C{sub L}. Assuming C{sub e} constant may cause an error of magnitude 19% while assuming C{sub L} constant causes an error of magnitude 5%. The sensitivity of the parabolic microscopic heat conduction model to the variation in C{sub e} is higher under the effect of a fluctuating heating source as compared to a unit step heating source. (authors)

  6. Study of Thermal properties of VO2 and multilayer VO2 thin films for application in Thermal Switches

    Science.gov (United States)

    Zhu, Gaohua

    Ultrafast nature of the phase transition near room temperature in VO2 makes it attractive material for applications in electronics and optical devices however utilization of corresponding drastic change in thermo-physical properties are rarely reported. In this study we investigate thermal and electronic properties of VO2 thin films on various substrates across the transition temperature to seek possibility of utilizing VO2 based thermal switches for applications in thermal devices. In addition, the interfacial heat transfer in VO2/metal multilayer thin film is mediated by phonons at low temperature, and when temperature is elevated beyond phase transition temperature, the interface thermal conductance is mediated mainly by both phons and electrons. VO2-multilayers approach is studied to utilize the switching interface thermal conductance in order to obtain higher thermal conductivity switch ratio than what can be achieved in intrinsic VO2. Thermal conductivities and interface thermal conductance of VO2 and VO2 multilayer thin films are measured using the time-domain thermoreflectance (TDTR) method. We will discuss interplay of phononic and electronic component to thermal conductivity in the light of Wiedemann-Franz law across the metal to insulator state of VO2 films.

  7. Thermal and magnetic properties of chitosan-iron oxide nanoparticles.

    Science.gov (United States)

    Soares, Paula I P; Machado, Diana; Laia, César; Pereira, Laura C J; Coutinho, Joana T; Ferreira, Isabel M M; Novo, Carlos M M; Borges, João Paulo

    2016-09-20

    Chitosan is a biopolymer widely used for biomedical applications such as drug delivery systems, wound healing, and tissue engineering. Chitosan can be used as coating for other types of materials such as iron oxide nanoparticles, improving its biocompatibility while extending its range of applications. In this work iron oxide nanoparticles (Fe3O4 NPs) produced by chemical precipitation and thermal decomposition and coated with chitosan with different molecular weights were studied. Basic characterization on bare and chitosan-Fe3O4 NPs was performed demonstrating that chitosan does not affect the crystallinity, chemical composition, and superparamagnetic properties of the Fe3O4 NPs, and also the incorporation of Fe3O4 NPs into chitosan nanoparticles increases the later hydrodynamic diameter without compromising its physical and chemical properties. The nano-composite was tested for magnetic hyperthermia by applying an alternating current magnetic field to the samples demonstrating that the heating ability of the Fe3O4 NPs was not significantly affected by chitosan.

  8. Magnetic colloid by PLA: Optical, magnetic and thermal transport properties

    Science.gov (United States)

    Pandey, B. K.; Shahi, A. K.; Gopal, Ram

    2015-08-01

    Ferrofluids of cobalt and cobalt oxide nanoparticles (NPs) have been successfully synthesized using liquid phase-pulse laser ablation (LP-PLA) in ethanol and double distilled water, respectively. The mechanism of laser ablation in liquid media and formation process for Co target in double distilled water (DDW) and ethanol are speculated based on the reactions between laser generated highly nascent cobalt species and vaporized solvent media in a confined high temperature and pressure at the plume-surrounding liquid interface region. Optical absorption, emission, vibrational and rotational properties have been investigated using UV-vis absorption, photoluminescence (PL) and Fourier transform-infra red (FT-IR) spectroscopy, respectively. In this study optical band gap of cobalt oxide ferrofluids has been engineered using different pulse energy of Nd:YAG laser in the range of (2.80-3.60 eV). Vibrating sample magnetometer (VSM) is employed to determine the magnetic properties of ferrofluids of cobalt and cobalt oxide NPs while their thermal conductivities are examined using rotating disc method. Ferrofluids have gained enormous curiosity due to many technological applications, i.e. drug delivery, coolant and heating purposes.

  9. Coating effects on thermal properties of carbon carbon and carbon silicon carbide composites for space thermal protection systems

    Science.gov (United States)

    Albano, M.; Morles, R. B.; Cioeta, F.; Marchetti, M.

    2014-06-01

    Many are the materials for hot structures, but the most promising one are the carbon based composites nowadays. This is because they have good characteristics with a high stability at high temperatures, preserving their mechanical properties. Unfortunately, carbon reacts rapidly with oxygen and the composites are subjected to oxidation degradation. From this point of view CC has to be modified in order to improve its thermal and oxidative resistance. The most common solutions are the use of silicon carbide into the carbon composites matrix (SiC composites) to make the thermal properties increase and the use of coating on the surface in order to protect the composite from the space plasma effects. Here is presented an experimental study on coating effects on these composites. Thermal properties of coated and non coated materials have been studied and the thermal impact on the matrix and surface degradation is analyzed by a SEM analysis.

  10. Submerged arc furnace process superior to the Waelz process in reducing PCDD/F emission during thermal treatment of electric arc furnace dust.

    Science.gov (United States)

    Xu, Fu-Qian; Huang, Shao-Bin; Liao, Wei-Tung; Wang, Lin-Chi; Chang, Yu-Cheng; Chang-Chien, Guo-Ping

    2014-01-01

    Besides the Waelz process, the submerged arc furnace (SAF) process has also been extensively used to retain metals from ashes and scraps in the metallurgical industry. However, very little is known about the formation and depletion of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from this thermal process. In this study, an electric arc furnace (EAF) dust treatment plant adopting the SAF process was investigated and compared to the plant adopting the Waelz process. The predominant contributor of PCDD/F I-TEQ input was the EAF dusts, accounting for 98.4% of the total. The PCDD/F contents in the generated fly ashes of the SAF were extremely low, as almost all the organic compounds for PCDD/F formation were decomposed by the high operating temperatures (1500-1700 °C) of the SAF. Therefore, the PCDD/F emission factor of the SAF process (46.9 μg I-TEQ/tonne-EAF dust) was significantly lower than that of the Waelz process (840-1120 μg I-TEQ/tonne-EAF dust). Its PCDD/F output/input ratios (0.23 and 0.50 based on mass and toxicity) were also lower than those of the Waelz process plant (0.62 and 1.19). Therefore, the SAF process is superior to the Waelz process in reducing the potential of PCDD/F formation.

  11. A non-destructive method to measure the thermal properties of frozen soils during phase transition

    Institute of Scientific and Technical Information of China (English)

    Bin Zhang; Chanjuan Han; Xiong Bill Yu

    2015-01-01

    Frozen soils cover about 40%of the land surface on the earth and are responsible for the global energy balances affecting the climate. Measurement of the thermal properties of frozen soils during phase transition is important for analyzing the thermal transport process. Due to the involvement of phase transition, the thermal properties of frozen soils are rather complex. This paper introduces the uses of a multifunctional instrument that integrates time domain reflectometry (TDR) sensor and thermal pulse technology (TPT) to measure the thermal properties of soil during phase transition. With this method, the extent of phase transition (freezing/thawing) was measured with the TDR module; and the corre-sponding thermal properties were measured with the TPT module. Therefore, the variation of thermal properties with the extent of freezing/thawing can be obtained. Wet soils were used to demonstrate the performance of this measurement method. The performance of individual modules was first validated with designed experiments. The new sensor was then used to monitor the properties of soils during freezingethawing process, from which the freezing/thawing degree and thermal properties were simultaneously measured. The results are consistent with documented trends of thermal properties variations.

  12. A non-destructive method to measure the thermal properties of frozen soils during phase transition

    Directory of Open Access Journals (Sweden)

    Bin Zhang

    2015-04-01

    Full Text Available Frozen soils cover about 40% of the land surface on the earth and are responsible for the global energy balances affecting the climate. Measurement of the thermal properties of frozen soils during phase transition is important for analyzing the thermal transport process. Due to the involvement of phase transition, the thermal properties of frozen soils are rather complex. This paper introduces the uses of a multifunctional instrument that integrates time domain reflectometry (TDR sensor and thermal pulse technology (TPT to measure the thermal properties of soil during phase transition. With this method, the extent of phase transition (freezing/thawing was measured with the TDR module; and the corresponding thermal properties were measured with the TPT module. Therefore, the variation of thermal properties with the extent of freezing/thawing can be obtained. Wet soils were used to demonstrate the performance of this measurement method. The performance of individual modules was first validated with designed experiments. The new sensor was then used to monitor the properties of soils during freezing–thawing process, from which the freezing/thawing degree and thermal properties were simultaneously measured. The results are consistent with documented trends of thermal properties variations.

  13. Physical, Thermal, Magnetic and Mechanical Properties of ARAA

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Y. B.; Lee, D. W. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Rhee, C. K. [National Fusion Research Institute, Daejeon, (Korea, Republic of)

    2015-10-15

    The mechanical properties of total ninety-eight model alloys designed for application to HCCR TBM in the ITER were evaluated. The addition of small amounts of Zr was found to have positive effects on creep and impact resistance, based on which Zr-containing reduced activation ferritic-martensitic steel, ARAA, has been developed. A 5-ton scale ARAA was produced via VIM and ESR methods and its basic properties required for fusion reactor applications were evaluated. It is found that the physical, thermal, magnetic and mechanical properties of ARAA are comparable to those of Eurofer 97. Reduced activation ferritic-martensitic (RAFM) steel is considered a primary candidate for the structural material in a fusion reactor, owing to its good swelling resistance and compatibility with various coolants. Several types of RAFM steels showing good performance have been developed, which include the European Eurofer 97 and the Japanese F82H. For these alloys, an extensive materials database is available. The structural materials for the blanket system is expected to be subjected to high heat-load and operate under high-energy (14 MeV) and high-fluence fusion neutron irradiation. The operational range of temperature for a blanket is limited by the high-temperature creep and low-temperature irradiation embrittlement of the structural material. RAFM steels developed thus far are known to be operable at 350-550 .deg. C. To expand the temperature window and thereby allow for various design options, it is important to develop alloys that are able to withstand high temperature and high-energy neutron irradiation.

  14. Multiscale Modeling of Carbon/Phenolic Composite Thermal Protection Materials: Atomistic to Effective Properties

    Science.gov (United States)

    Arnold, Steven M.; Murthy, Pappu L.; Bednarcyk, Brett A.; Lawson, John W.; Monk, Joshua D.; Bauschlicher, Charles W., Jr.

    2016-01-01

    Next generation ablative thermal protection systems are expected to consist of 3D woven composite architectures. It is well known that composites can be tailored to achieve desired mechanical and thermal properties in various directions and thus can be made fit-for-purpose if the proper combination of constituent materials and microstructures can be realized. In the present work, the first, multiscale, atomistically-informed, computational analysis of mechanical and thermal properties of a present day - Carbon/Phenolic composite Thermal Protection System (TPS) material is conducted. Model results are compared to measured in-plane and out-of-plane mechanical and thermal properties to validate the computational approach. Results indicate that given sufficient microstructural fidelity, along with lowerscale, constituent properties derived from molecular dynamics simulations, accurate composite level (effective) thermo-elastic properties can be obtained. This suggests that next generation TPS properties can be accurately estimated via atomistically informed multiscale analysis.

  15. Enhanced Thermal Decomposition Properties of CL-20 through Space-Confining in Three-Dimensional Hierarchically Ordered Porous Carbon.

    Science.gov (United States)

    Chen, Jin; He, Simin; Huang, Bing; Wu, Peng; Qiao, Zhiqiang; Wang, Jun; Zhang, Liyuan; Yang, Guangcheng; Huang, Hui

    2017-03-29

    High energy and low signature properties are the future trend of solid propellant development. As a new and promising oxidizer, hexanitrohexaazaisowurtzitane (CL-20) is expected to replace the conventional oxidizer ammonium perchlorate to reach above goals. However, the high pressure exponent of CL-20 hinders its application in solid propellants so that the development of effective catalysts to improve the thermal decomposition properties of CL-20 still remains challenging. Here, 3D hierarchically ordered porous carbon (3D HOPC) is presented as a catalyst for the thermal decomposition of CL-20 via synthesizing a series of nanostructured CL-20/HOPC composites. In these nanocomposites, CL-20 is homogeneously space-confined into the 3D HOPC scaffold as nanocrystals 9.2-26.5 nm in diameter. The effect of the pore textural parameters and surface modification of 3D HOPC as well as CL-20 loading amount on the thermal decomposition of CL-20 is discussed. A significant improvement of the thermal decomposition properties of CL-20 is achieved with remarkable decrease in decomposition peak temperature (from 247.0 to 174.8 °C) and activation energy (from 165.5 to 115.3 kJ/mol). The exceptional performance of 3D HOPC could be attributed to its well-connected 3D hierarchically ordered porous structure, high surface area, and the confined CL-20 nanocrystals. This work clearly demonstrates that 3D HOPC is a superior catalyst for CL-20 thermal decomposition and opens new potential for further applications of CL-20 in solid propellants.

  16. Experimental Investigation of Effect of Aluminum Filler Material on Thermal Properties of Palmyra Fiber Reinforced Composite

    Directory of Open Access Journals (Sweden)

    J. Pavanu Sai

    2014-12-01

    Full Text Available Natural fiber composites are renewable, cheap, completely or partially recyclable, carbon neutral and biodegradable. Their easy availability, lower density, higher specific properties, lower cost, satisfactory mechanical and thermal properties, non-corrosive nature, lesser abrasion to processing equipment, makes them an attractive ecological alternative to glass, carbon or other man-made synthetic fibers. Natural fiber composites are generally very good thermal insulators and thus cannot be used where thermal conduction is desirable. Increase in thermal conduction may be done by adding metal filler powders to the matrix. In this work, the effect of aluminum filler material on thermal properties of chemically treated palmyra fiber reinforced composites is investigated. Thermal properties studied include thermal conductivity, specific heat capacity, thermal diffusivity, thermal degradation and stability. Five different samples with 0%, 25%, 50%, 75%, 100% aluminum powder are considered. With the addition of aluminum filler powder, thermal conductivity increases, specific heat capacity decreases, thermal diffusivity increases and thermal stability improves with maximum at 50% aluminum powder.

  17. Properties of Starch Based Foams Made by Thermal Pressure Forming

    Directory of Open Access Journals (Sweden)

    J. Štancl

    2008-01-01

    Full Text Available Packaging materials based on expanded polystyrene can be substituted by biodegradable foam, manufactured by direct or indirect electrical heating of a potato starch suspension in a closed mold. This paper deals with an experimental evaluation of selected properties of potato starch and starch foam related to this technology: density, specific heat capacity and specific electrical conductivity of a water suspension of potato starch within the temperature range up to 100 °C, and mass fraction from 5 to 65 %. The electric conductivity and heat capacity changes were observed during direct ohmic heating of a starch suspension between electrodes in a closed cell (feeding voltage 100 V, frequency 50 Hz. Specific electric conductivity increases with temperature, with the exception of the gelatinization region at 60 to 70 °C, and decreases with increasing concentration of starch (the temperature and concentration dependencies were approximated using the Lorentz equation. Direct ohmic heating is restricted by a significant decrease in effective electrical conductivity above a temperature of 100 °C, when evaporated steam worsens the contact with the electrodes. Experiments show that when direct ohmic heating is not combined with indirect contact heating, only 20 % of the water can be evaporated from manufactured samples and the starch foam is not fully formed. This is manifested by only a slight expansion of the heated sample. Only the indirect contact heating from the walls of the mold, with the wall temperature above 180 °C, forms a fixed porous structure (expansion of about 300 % and a crust, ensuring suitable mechanical and thermal insulation properties of the manufactured product. The effective thermal conductivity of the foamed product (sandwich plates with a porous core and a compact crust was determined by the heated wire method, while the porosity of the foam and the thickness of the crust were evaluated by image analysis of colored cross

  18. Simultaneous Measurement of Thermal Diffusivity and Thermal Conductivity by Means of Inverse Solution for One-Dimensional Heat Conduction (Anisotropic Thermal Properties of CFRP for FCEV)

    Science.gov (United States)

    Kosaka, Masataka; Monde, Masanori

    2015-11-01

    For safe and fast fueling of hydrogen in a fuel cell electric vehicle at hydrogen fueling stations, an understanding of the heat transferred from the gas into the tank wall (carbon fiber reinforced plastic (CFRP) material) during hydrogen fueling is necessary. Its thermal properties are needed in estimating heat loss accurately during hydrogen fueling. The CFRP has anisotropic thermal properties, because it consists of an adhesive agent and layers of the CFRP which is wound with a carbon fiber. In this paper, the thermal diffusivity and thermal conductivity of the tank wall material were measured by an inverse solution for one-dimensional unsteady heat conduction. As a result, the thermal diffusivity and thermal conductivity were 2.09 × 10^{-6}{ m}2{\\cdot }{s}^{-1} and 3.06{ W}{\\cdot }{m}{\\cdot }^{-1}{K}^{-1} for the axial direction, while they were 6.03 × 10^{-7} {m}2{\\cdot }{s}^{-1} and 0.93 {W}{\\cdot }{m}^{-1}{\\cdot }{K}^{-1} for the radial direction. The thermal conductivity for the axial direction was about three times higher than that for the radial direction. The thermal diffusivity shows the same trend in both directions because the thermal capacity, ρ c, is independent of direction, where ρ is the density and c is the heat capacity.

  19. Effect of Rare Earth Elements on Thermal Fatigue Property of Low Chromium Semi-Steel

    Institute of Scientific and Technical Information of China (English)

    常立民; 刘建华; 张瑞军; 邵利; 于升学; 谌岩

    2003-01-01

    The effect of rare earth elements on eutectic carbide′s morphology of low chromium semi-steel in as-cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide′s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950 ℃ for 3 h.

  20. The thermal and mechanical properties of electron beam-irradiated polylactide

    Energy Technology Data Exchange (ETDEWEB)

    Kuk, In Seol; Jung, Chan Hee; Hwang, In Tae; Choi, Jae Hak; Nho, Young Chang [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2010-06-15

    The effect of electron beam irradiation on the thermal and mechanical properties of polylactide (PLA) was investigated in this research. PLA films were irradiated by electron beams at different absorption doses ranging from 20 to 200 kGy. The thermal and mechanical properties of the irradiated PLA films were investigated by means of differential scanning calorimeter, thermogravimetric analyzer, universal testing machine, dynamic mechanical analyzer, and thermal mechanical analyzer. The results revealed that the chain scission of the PLA predominated over the crosslinking during the irradiation, which considerably deteriorated the thermal and mechanical properties of the PLA.

  1. Adsorption of ionic liquid onto halloysite nanotubes: Thermal and mechanical properties of heterophasic PE-PP copolymer nanocomposites

    Science.gov (United States)

    Bischoff, E.; Simon, D. A.; Liberman, S. A.; Mauler, R. S.

    2016-03-01

    The surface adsorption of inorganic clays with ionic liquids has attracted much attention due to improve the interaction of hydrophilic clay with the hydrophobic polymers. However, successful organic adsorption strongly depends on the characteristics of ionic liquid (anion, chain size and concentration), and the reaction conditions (as polarity of solvent). In this study, such factors were analyzed and correlated with morphology, thermal and mechanical properties of the nanocomposites. The heterophasic ethylene-propylene copolymer nanocomposites were prepared by melt intercalation method in a twin screw co-rotating extruder. The halloysite nanotubes (HNT) was used as filler - natural and modified with different ionic liquids. The results showed that a better distribution and dispersion of the nanoparticles was achieved in the samples with modified HNT (m-HNT) and was more significant when the ionic liquid adsorption was conducted in a less polar solvent. The thermal stability of the nanocomposites with m- HNT was higher compared to the neat CP. Additionally, the better balance in the mechanical properties was obtained by the use of the more hydrophobic ionic liquid and higher concentration with improve of 27% in the Young Modulus without loss in the impact properties at room temperature. These superior behaviors of ionic liquid adsorption products exhibit properties suitable for many industrial applications.

  2. Thermal capacitator design rationale. Part 1: Thermal and mechanical property data for selected materials potentially useful in thermal capacitor design and construction

    Science.gov (United States)

    Bailey, J. A.; Liao, C. K.

    1975-01-01

    The thermal properties of paraffin hydrocarbons and hydrocarbon mixtures which may be used as the phase change material (PCM) in thermal capacitors are discussed. The paraffin hydrocarbons selected for consideration are those in the range from C11H24 (n-Undecane) to C20H42 (n-Eicosane). A limited amount of data is included concerning other properties of paraffin hydrocarbons and the thermal and mechanical properties of several aluminum alloys which may find application as constructional materials. Data concerning the melting temperature, transition temperature, latent heat of fusion, heat of transition, specific heat, and thermal conductivity of pure and commercial grades of paraffin hydrocarbons are given. An index of companies capable of producing paraffin hydrocarbons and information concerning the availability of various grades (purity levels) is provided.

  3. Polymer Nanofibers with Outstanding Thermal Conductivity and Thermal Stability: Fundamental Linkage between Molecular Characteristics and Macroscopic Thermal Properties

    CERN Document Server

    Zhang, Teng; Luo, Tengfei

    2014-01-01

    Polymer nanofibers with high thermal conductivities and outstanding thermal stabilities are highly desirable in heat transfer-critical applications such as thermal management, heat exchangers and energy storage. In this work, we unlock the fundamental relations between the thermal conductivity and thermal stability of polymer nanofibers and their molecular characteristics by studying the temperature-induced phase transitions and thermal transport of a series of polymer nanofibers. Ten different polymer nanofibers with systematically chosen molecular structures are studied using large scale molecular dynamics simulations. We found that high thermal conductivity and good thermal stability can be achieved in polymers with rigid backbones, exemplified by {\\pi}-conjugated polymers, due to suppressed segmental rotations and large phonon group velocities. The low probability of segmental rotation does not only prevent temperature-induced phase transition but also enables long phonon mean free paths due to reduced di...

  4. Thermal and Mechanical Properties of a Complex Nonlinear Optical Material: Cadmium Mercury Thiocyanate Crystal

    Institute of Scientific and Technical Information of China (English)

    YUAN Duo-Rong; XU Dong; ZHANG Guang-Hui; LIU Ming-Guo; GUO Shi-Yi; MENG Fan-Qing; LU Meng-Kai; FANG Qi; JIANG Min-Hua

    2000-01-01

    Institute of Crystal Materials and State Key Laboratory of Crystal Materials, Shandong University, Ji'nan 250100 (Received 18 March 2000) The data of the thermal expansion and specific heat of cadmium mercury thiocyanate crystal have been obtained. The specific heat is 0.7588J/g℃ at room temperature. The thermal expansion occurs in the direction parallel to the c-axis, and the thermal contraction occurs in the direction parallel to the a-axis. The thermal expansion is the same as the thermal contraction at 353 K. The relationship between thermal properties and crystal structure is discussed.

  5. Thermal properties of nanocrystalline goethite, magnetite, and maghemite

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y.H., E-mail: yhc513@mail.ncku.edu.tw [Department of Earth Sciences, National Cheng Kung University, 1, University Rd., East Dist., Tainan City 701, Taiwan, ROC (China)

    2013-03-15

    Highlights: ► High-temperature properties of iron oxide/hydroxide nano-minerals are studied. ► Phase-transition temperatures of nano-minerals increase with larger particle sizes. ► In situ high-temperature XRD results show reductive reactions in the final state. ► Particle size and atmosphere affect the transition temperature, phase, and path. -- Abstract: This study investigated the high-temperature properties of nano-goethite, nano-magnetite, and nano-maghemite. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) of these nano-minerals revealed that phase-transition temperatures increased with increasing particle sizes. This was due to the high surface energy of the nano-minerals with small particle sizes, which caused them to require lower energies to change their structures, and thereby, resulted in lower phase-transition temperatures. Further, the transition temperatures measured by ex situ and in situ high-temperature X-ray diffraction (XRD) were lower than those observed by TGA–DTA. This may be due to the difference in the atmosphere and heating time in the high-temperature processes. In this study, we found that the particle size of nano-minerals, atmosphere (oxygen pressure), and heating time were the key factors influencing the transition temperature, phase, and path. TGA–DTA measurements gave the initial clue to understand the phase transition, and in situ high-temperature XRD measurements helped elucidate the exact phase-transition behavior of the nano-minerals.

  6. Thermal effects of variable material properties and metamorphic reactions in a three-component subducting slab

    DEFF Research Database (Denmark)

    Chemia, Zurab; Dolejš, David; Steinle-Neumann, Gerd

    2015-01-01

    We explore the effects of variable material properties, phase transformations, and metamorphic devolatilization reactions on the thermal structure of a subducting slab using thermodynamic phase equilibrium calculations combined with a thermal evolution model. The subducting slab is divided...... into three layers consisting of oceanic sediments, altered oceanic crust, and partially serpentinized or anhydrous harzburgite. Solid-fluid equilibria and material properties are computed for each layer individually to illustrate distinct thermal consequences when chemical and mechanical homogenization...

  7. Reversible control of electrochemical properties using thermally-responsive polymer electrolytes.

    Science.gov (United States)

    Kelly, Jesse C; Pepin, Mark; Huber, Dale L; Bunker, Bruce C; Roberts, Mark E

    2012-02-14

    A thermally responsive copolymer is designed to modulate the properties of an electrolyte solution. The copolymer is prepared using pNIPAM, which governs the thermal properties, and acrylic acid, which provides the electrolyte ions. As the polymer undergoes a thermally activated phase transition, the local environment around the acid groups is reversibly switched, decreasing ion concentration and conductivity. The responsive electrolyte is used to control the activity of redox electrodes with temperature.

  8. Transport properties of multicomponent thermal plasmas: Grad method versus Chapman-Enskog method

    Energy Technology Data Exchange (ETDEWEB)

    Porytsky, P. [Institute for Nuclear Research, 03680 Kyiv (Ukraine); Krivtsun, I.; Demchenko, V. [Paton Welding Institute, 03680 Kyiv (Ukraine); Reisgen, U.; Mokrov, O.; Zabirov, A. [RWTH Aachen University, ISF-Welding and Joining Institute, 52062 Aachen (Germany); Gorchakov, S.; Timofeev, A.; Uhrlandt, D. [Leibniz Institute for Plasma Science and Technology (INP Greifswald), 17489 Greifswald (Germany)

    2013-02-15

    Transport properties (thermal conductivity, viscosity, and electrical conductivity) for multicomponent Ar-Fe thermal plasmas at atmospheric pressure have been determined by means of two different methods. The transport coefficients set based on Grad's method is compared with the data obtained when using the Chapman-Enskog's method. Results from both applied methods are in good agreement. It is shown that the Grad method is suitable for the determination of transport properties of the thermal plasmas.

  9. Preparation and thermal properties of chitosan/bentonite composite beads

    Directory of Open Access Journals (Sweden)

    Teofilović Vesna

    2014-01-01

    Full Text Available Due to their biodegradable and nontoxic nature, biopolymer composites are often used as remarkable adsorbents in treatment of wastewater. In this study chitosan/bentonite composite beads were obtained by addition of clay into the polymer using solution process. Before the composite preparation, bentonite was modified with surfactant cetyltrimethyl ammonium bromide (CTAB. The morphology of beads was examined by scanning electron microscopy (SEM. Thermal properties of the composite beads were studied by simultaneous thermogravimetry coupled with differential scanning calorimetry (SDT and differential scanning calorimetry (DSC. TG results showed that the complex decomposition mechanism of the composites depends on the preparation procedure. It was observed that the concentration of NaOH used for composites precipitation affects the final structure of beads. The influence of preparation procedure on the glass transition temperature Tg of chitosan/bentonite samples was not found (Tg values for all samples were about 144 °C. [Projekat Ministarstva nauke Republike Srbije, br. III45022 and ON172014 and Provincial Secretariat of Vojvodina for Science and Technological Development 114-451-2396/2011-01.

  10. Phonon and thermal properties of achiral single wall carbon nanotubes

    Indian Academy of Sciences (India)

    Prapti Saxena; Sankar P Sanyal

    2006-08-01

    A detailed theoretical study of the phonon and thermal properties of achiral single wall carbon nanotubes has been carried out using force constant model considering up to third nearest-neighbor interactions. We have calculated the phonon dispersions, density of states, radial breathing modes (RBM) and the specific heats for various zigzag and armchair nanotubes, with radii ranging from 2.8 Å to 11.0 Å. A comparative study of phonon spectrum with measured Raman data reveals that the number of Raman active modes for a tube does not depend on the number of atoms present in the unit cell but on its chirality. Calculated phonon modes at the zone center more or less accurately predicted the Raman active modes. The radial breathing mode is of particular interest as for a specific radius of a nanotube it is found to be independent of its chirality. We have also calculated the variation of RBM and G-band modes for tubes of different radii. RBM shows an inverse dependence on the radius of the tube. Finally, the values of specific heat are calculated for various nanotubes at room temperature and it was found that the specific heat shows an exponential dependence on the diameter of the tube.

  11. Effect of thermal-treatment sequence on sound absorbing and mechanical properties of porous sound-absorbing/thermal-insulating composites

    Directory of Open Access Journals (Sweden)

    Huang Chen-Hung

    2016-01-01

    Full Text Available Due to recent rapid commercial and industrial development, mechanical equipment is supplemented massively in the factory and thus mechanical operation causes noise which distresses living at home. In livelihood, neighborhood, transportation equipment, jobsite construction noises impact on quality of life not only factory noise. This study aims to preparation technique and property evaluation of porous sound-absorbing/thermal-insulating composites. Hollow three-dimensional crimp PET fibers blended with low-melting PET fibers were fabricated into hollow PET/low-melting PET nonwoven after opening, blending, carding, lapping and needle-bonding process. Then, hollow PET/low-melting PET nonwovens were laminated into sound-absorbing/thermal-insulating composites by changing sequence of needle-bonding and thermal-treatment. The optimal thermal-treated sequence was found by tensile strength, tearing strength, sound-absorbing coefficient and thermal conductivity coefficient tests of porous composites.

  12. Thermal formation of mesoporous single-crystal Co3O4 nano-needles and their lithium storage properties

    KAUST Repository

    Lou, Xiong Wen

    2008-01-01

    In this work, we report the simple solid-state formation of mesoporous Co3O4 nano-needles with a 3D single-crystalline framework. The synthesis is based on controlled thermal oxidative decomposition and re-crystallization of precursor β-Co(OH)2 nano-needles. Importantly, after thermal treatment, the needle-like morphology can be completely preserved, despite the fact that there is a large volume contraction accompanying the process: β-Co(OH)2 → Co3O 4. Because of the intrinsic crystal contraction, a highly mesoporous structure with high specific surface area has been simultaneously created. The textual properties can be easily tailored by varying the annealing temperature between 200-400 °C. Interestingly, thermal re-crystallization at higher temperatures leads to the formation of a perfect 3D single-crystalline framework. Thus derived mesoporous Co3O4 nano-needles serve as a good model system for the study of lithium storage properties. The optimized sample manifests very low initial irreversible loss (21%), ultrahigh capacity, and excellent cycling performance. For example, a reversible capacity of 1079 mA h g-1 can be maintained after 50 cycles. The superior electrochemical performance and ease of synthesis may suggest their practical use in lithium-ion batteries. © The Royal Society of Chemistry 2008.

  13. Preparation, thermal properties and thermal reliabilities of microencapsulated n-octadecane with acrylic-based polymer shells for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Xiaolin [Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory of Advanced Materials, Department of Materials Science and Engineering, Tsinghua University, Haidian District, Beijing 100084 (China); Song, Guolin; Chu, Xiaodong; Li, Xuezhu [Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Tang, Guoyi, E-mail: tanggy@tsinghua.edu.cn [Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory of Advanced Materials, Department of Materials Science and Engineering, Tsinghua University, Haidian District, Beijing 100084 (China)

    2013-01-10

    Highlights: Black-Right-Pointing-Pointer n-Octadecane was encapsulated by p(butyl methacrylate) (PBMA) and p(butyl acrylate). Black-Right-Pointing-Pointer Microcapsules using divinylbenzene as crosslinking agent have better quality. Black-Right-Pointing-Pointer Microcapsule with butyl methacrylate-divinylbenzene has highest latent heat. Black-Right-Pointing-Pointer Microcapsule with butyl methacrylate-divinylbenzene has greatest thermal stability. Black-Right-Pointing-Pointer Phase change temperatures and enthalpies of the microcapsules varied little after thermal cycle. - Abstract: Microencapsulation of n-octadecane with crosslinked p(butyl methacrylate) (PBMA) and p(butyl acrylate) (PBA) as shells for thermal energy storage was carried out by a suspension-like polymerization. Divinylbenzene (DVB) and pentaerythritol triacrylate (PETA) were employed as crosslinking agents. The surface morphologies of the microencapsulated phase change materials (microPCMs) were studied by scanning electron microscopy (SEM). Thermal properties, thermal reliabilities and thermal stabilities of the as-prepared microPCMs were investigated by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The microPCMs prepared by using DVB exhibit greater heat capacities and higher thermal stabilities compared with those prepared by using PETA. The thermal resistant temperature of the microPCM with BMA-DVB polymer was up to 248 Degree-Sign C. The phase change temperatures and latent heats of all the as-prepared microcapsules varied little after 1000 thermal cycles.

  14. A cost-effective process to prepare VO{sub 2} (M) powder and films with superior thermochromic properties

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Xiudi; Zhang, Hua; Chai, Guanqi; Sun, Yaoming [Key Laboratory of Renewable Energy and Gas Hydrates, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Yang, Tao [State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640 (China); Cheng, Haoliang; Chen, Lihua; Miao, Lei [Key Laboratory of Renewable Energy and Gas Hydrates, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Xu, Gang, E-mail: xiudixiao@163.com [Key Laboratory of Renewable Energy and Gas Hydrates, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2014-03-01

    Graphical abstract: Combining codeposition and short time post annealing, VO{sub 2} (M) with high quality and excellent phase transition performance is obtained. After mixing the VO{sub 2} powder with acrylic resin, the composite films deposited on glass show superior visible transmission and solar modulation, which can be used as an excellent candidate of low cost smart window in energy saving field. - Highlights: • The VO{sub 2} powder obtained by short time thermolysis method is high purity and crystallinity with superior phase transition performance. • The maximum decreasing efficiency of phase transition temperature is about −30 K/at% with w = 0.4 at%. • After mixing VO{sub 2} powder with acrylic resin, the maximal visible transmission of the composite films is 48% and the transmission modulation at 2000 nm is 37.3% with phase transition temperature of 66.2 °C. • Though the phase transition performance is weakened by tungsten doping, the film prepared by 1.3 at% tungsten doped VO{sub 2} still show superior transmission modulation about 26.4%, which means that it is a potential candidate as smart windows. - Abstract: VO{sub 2} powder with superior phase transition performance was prepared by convenient thermolysis method. The results illustrated that VO{sub 2} powder show high purity and crystallinity. VO{sub 2} particles are transformed from cluster to quasi-sphere with the increase of annealing temperature. The DSC analysis proves that VO{sub 2} show superior phase transition performance around 68 °C. The phase transition temperature can be reduced to 33.5 °C by 1.8 at% tungsten doping. The maximum decreasing efficiency of phase transition temperature is about −30 K/at% with w = 0.4 at%. After mixing VO{sub 2} powder with acrylic resin, the maximal visible transmission of the composite thin films on glass is 48% and the transmission modulation at 2000 nm is 37.3% with phase transition temperature of 66.2 °C. Though the phase transition

  15. The effects of thermally reversible agents on PVC stability properties

    Science.gov (United States)

    Wang, J.; Yao, J.; Xiong, X. H.; Jia, C. X.; Ren, R.; Chen, P.; Liu, X. M.

    2016-07-01

    One kind of thermally reversible cross-linking agents for improving PVC thermally stability was synthesized. The chemical structure and thermally reversible characteristics of cross-linking agents were investigated by FTIR and DSC analysis, respectively. FTIR results confirmed that the cyclopentadienyl barium mercaptides ((CPD-C2H4S)2Ba) were successfully synthesized. DSC results showed it has thermally reversible characteristics and the depolymerization temperature was between 170 °C and 205 °C. The effects of cross-linking reaction time on gel content of Poly(vinyl chloride) compounds was evaluated. The gel content value arrived at 42% after being cross-linked for 25 min at 180 C. The static thermally stability measurement proved that the thermally stability of PVC compounds was improved.

  16. Thermal transport properties of uranium dioxide by molecular dynamics simulations

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Taku; Sinnott, Susan B. [Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611 (United States); Tulenko, James S. [Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL 32611 (United States); Grimes, Robin W. [Department of Materials, Imperial College London, London SW7 2AZ (United Kingdom); Schelling, Patrick K. [AMPAC and Department of Physics, University of Central Florida, Orlando, FL 32816 (United States); Phillpot, Simon R. [Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611 (United States)], E-mail: sphil@mse.ufl.edu

    2008-04-30

    The thermal conductivities of single crystal and polycrystalline UO{sub 2} are calculated using molecular dynamics simulations, with interatomic interactions described by two different potential models. For single crystals, the calculated thermal conductivities are found to be strongly dependent on the size of the simulation cell. However, a scaling analysis shows that the two models predict essentially identical values for the thermal conductivity for infinite system sizes. By contrast, simulations with the two potentials for identical fine polycrystalline structures yield estimated thermal conductivities that differ by a factor of two. We analyze the origin of this difference.

  17. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Sari, Ahmet; Karaipekli, Ali [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)

    2009-05-15

    This study is focused on the preparation and characterization of thermal properties and thermal reliability of palmitic acid (PA)/expanded graphite (EG) composite as form-stable phase change material (PCM). The maximum mass fraction of PA retained in EG was found as 80 wt% without the leakage of PA in melted state even when it is heated over the melting point of PA. Therefore, the PA/EG (80/20 w/w%) composite was characterized as form-stable PCM. From differential scanning calorimetry (DSC) analysis, the melting and freezing temperatures and latent heats of the form-stable PCM were measured as 60.88 and 60.81 C and 148.36 and 149.66 J/g, respectively. Thermal cycling test showed that the composite PCM has good thermal reliability although it was subjected to 3000 melting/freezing cycles. Fourier transformation infrared (FT-IR) spectroscopic investigation indicated that it has good chemical stability after thermal cycling. Thermal conductivities of PA/EG composites including different mass fractions of EG (5%, 10%, 15% and 20%) were also measured. Thermal conductivity of form-stable PA/EG (80/20 w/w%) composite (0.60 W/mK) was found to be 2.5 times higher than that of pure PA (0.17 W/mK). Moreover, the increase in thermal conductivity of PA was confirmed by comparison of the melting and freezing times of pure PA with that of form-stable composite. Based on all results, it was concluded that the form-stable PA/EG (80/20 w/w%) has considerable latent heat energy storage potential because of its good thermal properties, thermal and chemical reliability and thermal conductivity. (author)

  18. Fabrication, thermal properties and thermal stabilities of microencapsulated n-alkane with poly(lauryl methacrylate) as shell

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Xiaolin, E-mail: shirleyqiu2009@gmail.com [Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, School of Mechanical Engineering, Jiangnan University, Wuxi 214122 (China); Lu, Lixin; Wang, Ju [Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, School of Mechanical Engineering, Jiangnan University, Wuxi 214122 (China); Tang, Guoyi [Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory of Advanced Materials, Department of Materials Science and Engineering, Tsinghua University, Haidian District, Beijing 100084 (China); Song, Guolin [Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China)

    2015-11-20

    Highlights: • Microencapsulation of octadecane and paraffin by crosslinked poly(lauryl methacrylate). • Octadecane microcapsules have a melting enthalpy of about 118 J g{sup −1}. • Weight loss temperatures of the microcapsules were increased by 67 °C and 28 °C. • Phase change enthalpies decreased by around 10 wt% after 500 thermal cycles. • Foams with microcapsules can be applied for passive temperature control. - Abstract: Microencapsulation of n-octadecane or paraffin with poly(lauryl methacrylate) (PLMA) shell was performed by a suspension-like polymerization. The polymer shell was crosslinked by pentaerythritol tetraacrylate (PETRA). The surface morphologies of microcapsules were investigated by scanning electron microscopy (SEM). Phase change properties, thermal reliabilities and thermal stabilities of microcapsules were determined by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The n-octadecane microcapsule exhibits higher melting enthalpy (118.0 J g{sup −1}) and crystallization enthalpy (108.3 J g{sup −1}) compared with the paraffin microcapsule. The thermal resistant temperatures were enhanced by more than 25 °C when n-alkanes were microencapsulated by PLMA. The PCM contents of microcapsules decreased by less than 4 wt% and 6 wt% after 500 and 1000 thermal cycles, respectively. Heat-up experiments indicated that microcapsule-treated foams exhibited upgraded thermal regulation capacities. Consequently, microencapsulated n-octadecane or paraffin with PLMA as shell possesses good potentials for heat storage and thermal regulation.

  19. Enhanced mechanical and thermal properties of regenerated cellulose/graphene composite fibers.

    Science.gov (United States)

    Tian, Mingwei; Qu, Lijun; Zhang, Xiansheng; Zhang, Kun; Zhu, Shifeng; Guo, Xiaoqing; Han, Guangting; Tang, Xiaoning; Sun, Yaning

    2014-10-13

    In this study, a wet spinning method was applied to fabricate regenerated cellulose fibers filled with low graphene loading which was systematically characterized by SEM, TEM, FTIR and XRD techniques. Subsequently, the mechanical and thermal properties of the resulting fibers were investigated. With only 0.2 wt% loading of graphene, a ∼ 50% improvement of tensile strength and 25% enhancement of Young's modulus were obtained and the modified Halpin-Tsai model was built to predict the mechanical properties of composite fibers. Thermal analysis of the composite fibers showed remarkably enhanced thermal stability and dynamic heat transfer performance of graphene-filled cellulose composite fiber, also, the presence of graphene oxide can significantly enhance the thermal conductivity of the composite fiber. This work provided a facile way to improve mechanical and thermal properties of regenerated cellulose fibers. The resultant composite fibers have potential application in thermal insulation and reinforced fibrous materials. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. A geologic evaluation of thermal properties for the Elysium and Aeolis quadrangles of Mars

    Science.gov (United States)

    Zimbelman, James R.; Leshin, Laurie A.

    1987-01-01

    The results of an analysis of high-resolution thermal inertia data (obtained with the IR Thermal Mapper) for the Elysium and Aeolis quadrangles of Mars are presented. The results indicate that aeolian features, both with dark and light albedos relative to their surroundings, have thermal inertias higher than that of the surrounding terrains. On the other hand, terrains with distinctive surface relief do not have distinguishable thermal properties, even when these terrains can be spatially resolved from surrounding units. Thermal inertias for individual geologic units within the two quadrangles appear to be more strongly controlled by the location of the terrain in either the northern plains or the southern highlands than by properties intrinsic to the unit. The similarity of regional thermal properties observed at both high and low spatial resolutions indicates a regional homogeneity of much of the Martian surface at scales larger than 5 km.

  1. Mineralogy and thermal properties of clay from Slatina (Ub, Serbia)

    Science.gov (United States)

    Milosevic, Maja; Logar, Mihovil; Kaludjerovic, Lazar; Jelic, Ivana

    2017-04-01

    The "Slatina" deposit, Ub, Serbia was opened in 1965 and represents one of few deposits exploited by "Kopovi" a.d., Ub, company. Deposit is composed of clay layers belonging to Neogene sediments that are widespread transgressive over granitoid rocks of Cer mountain and Paleozoic and Mesozoic sediments. Clay is mostly of illite-montmorillonite-kaolinite type and they are generally used as ceramic materials while some of the layers are used as fire-resistant materials. In this study we present mineralogical and thermal characterization of two samples to determine their application as industrial materials. Chemical and mineral composition was determined using inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD) on powder and oriented samples, infrared spectroscopy (IR) and granulometry. Cationic exchange capacity (CEC) and specific surface area (SSA) was determined using spectrophotometry and methylene blue (MB). Thermal properties where determined by gravimetry (120, 350, 600 and 1000 oC) and differential thermal analysis (DTA). Quantitative mineral composition obtained by Rietveld refinement of combined chemical and XRD data shows that the sample 1(SC) is mainly smectite-illite (45%) and kaolinite (14%) clay with 19% of quartz, 10% feldspars and 7% of limonite, while sample 2(SV) is smectite-illite (43%) and kaolinite (11%) clay with 10% of quartz, 15% feldspars and 7% of limonite. Both samples have low content of impurities (carbonate minerals). Medium grain size (μm) goes from 1.02 (SSA = 104 m2/g) for sample 1(SC) to 0.71 (SSA = 117 m2/g) for sample 2(SV) while their CEC is 12.7 and 14.9 mmol/100g for 1(SC) and 2(SV) respectively. IR spectra of the samples shows larger amount of smectite clays with quartz and carbonate minerals for both samples which is in accordance with XRD data. DTA data shows couple of events that are endothermic. First one (100-200 oC) is associated with loss of moisture and constitutive water, second

  2. Characterisation of advanced windows. Determination of thermal properties by measurements

    Energy Technology Data Exchange (ETDEWEB)

    Duer, K.

    2001-04-01

    optically inhomogeneous materials). Therefor an outdoor test facility has been constructed in order to facilitate the measurement of direct solar transmittance of optically inhomogeneous samples under natural solar radiation and under any chosen angle of incidence. The test facility is based on a scanning pyranometer mounted in a tracking device. Utilising the equipment and the procedures for measurements and data treatment described in this report will in most cases allow a full thermal characterisation of advanced windows and glazings to be carried out by measurements and with good accuracy. As an example of this the thermal and optical properties of a prototypical aerogel glazing have been determined by means of measurements. (au)

  3. Interrelationships of morphology, thermal and mechanical properties in uncrosslinked and dynamically crosslinked PP/EOC and PP/EPDM blends

    Directory of Open Access Journals (Sweden)

    2010-04-01

    Full Text Available Thermoplastic vulcanizates (TPVs based on polypropylene (PP with ethylene octene copolymer (EOC and ethylene propylene diene rubber (EPDM have been developed by coagent assisted dicumyl peroxide crosslinking system. The study was pursued to explore the influence of two dissimilar polyolefin polymers (EOC and EPDM having different molecular architectures on the state and mode of dispersion of the blend components and their effects with special reference to morphological, thermal and mechanical characteristics. The effects of dynamic crosslinking of the PP/EOC and PP/EPDM have been compared by varying the concentration of crosslinking agent and ratio of blend components. The results suggested that the uncrosslinked and dynamically crosslinked blends of PP/EOC exhibit superior mechanical properties over PP/EPDM blends. From the hystersis experiments it was found that PP/EOC blends also perform better fatigue properties over PP/EPDM based blends. It was demonstrated that, the origin of the improved mechanical properties of EOC based blends is due to the combined effect of the unique molecular architecture with the presence of smaller crystals and better interfacial interaction of EOC phase with PP as supported by the results of thermal and fatigue analyses.

  4. Mechanical and thermal properties of tungsten carbide – graphite nanoparticles nanocomposites

    Directory of Open Access Journals (Sweden)

    Kornaus Kamil

    2016-06-01

    Full Text Available Previous studies concerning pure tungsten carbide polycrystalline materials revealed that nanolayers of graphite located between WC grains improve its thermal properties. What is more, pressure-induced orientation of graphene nano platelets (GNP in hot pressed silicon nitride-graphene composites results in anisotropy of thermal conductivity. Aim of this study was to investigate if addition of GNP to WC will improve its thermal properties. For this purpose, tungsten carbide with 0.5–6 wt.% of GNP(12-additive underwent hot pressing. The microstructure observations performed by SEM microscopy. The anisotropy was determined via ultrasonic measurements. The following mechanical properties were evaluated: Vickers hardness, bending strength, fracture toughness KIc. The influence of GNP(12 addition on oxidation resistance and thermal conductivity was examined. It was possible to manufacture hot-pressed WC-graphene composites with oriented GNP(12 particles, however, the addition of graphene decreased both thermal and mechanical properties of the material.

  5. Another Demo of the Unusual Thermal Properties of Rubber

    Science.gov (United States)

    Liff, Mark I.

    2010-01-01

    The unusual thermal behavior of rubbers, though discovered a long time ago, can still be mind-boggling for students and teachers who encounter this class of polymeric systems. Unlike other solids, stretched elastic polymers shrink upon heating. This is a manifestation of the Gough-Joule (G-J) effect. Joule in the 1850s studied the thermal behavior…

  6. Soil thermal properties at Kalpakkam in coastal south India

    Indian Academy of Sciences (India)

    K Anandakumar; R Venkatesan; Thara V Prabha

    2001-09-01

    Time series of soil surface and subsurface temperatures, soil heat ux, net radiation, air temperature and wind speed were measured at two locations in Kalpakkam, coastal southeast India. The data were analysed to estimate soil thermal di usivity, thermal conductivity, volumetric heat capacity and soil heat ux. This paper describes the results and discusses their implications.

  7. Thermal Properties of Some Organic Liquids Using Ultrasonic Velocity Measurements

    Directory of Open Access Journals (Sweden)

    P. Ramadoss

    2011-01-01

    Full Text Available Debye temperature and thermal relaxation time has been calculated in normal and boiling temperature. Using thermal relaxation time, the heat of fusion has been calculated for nineteen organic liquids and the results throw light on the method of calculating heat of fusion.

  8. Study on Thermal Stability and Spectroscopic Properties of Nd3+ -Doped Phosphate Laser Glasses

    Institute of Scientific and Technical Information of China (English)

    Shi Qi; Lv Jingwen; Cheng Hong; Fu Xingguo; Sun Yu

    2004-01-01

    Fluorescence spectra, absorption spectra and thermal stability properties of Nd3 + -doped phosphate laser glasses were tested in this work. We calculated spectroscopic parameters of Nd3 + -doped phosphate laser glasses according to their absorption spectrum. Measuring and calculating linear thermal expansion coefficient, and analysising thermal stability of glasses show that this kind of Nd3 + -doped phosphate laser glasses has thermal expansion coefficient α = 38.75× 10 -7/℃ and optimal spectroscopic properties which extend application range of Nd +3-doped phosphate laser glasses.

  9. The influence of variations of elemental composition on the thermal properties of interstellar gas

    Science.gov (United States)

    Vasiliev, E. O.; Shchekinov, Yu. A.

    2016-10-01

    The mixing of metals and redistribution of the relative abundances of chemical elements in the interstellar medium often takes place on a timescale that exceeds the characteristic timescales for many other processes, such as ionization and the establishment of thermal equilibrium. Under these conditions, different regions of interstellar gas can have different thermal, chemical, and spectral properties. The paper considers the ionization kinetics and thermal regime of interstellar gas with variations in the relative elemental abundances. The thermal properties and observational (spectral) characteristics are most sensitive to variations of the relative abundance of carbon, oxygen, neon, and iron. The dynamic consequences of such variations are considered.

  10. Thermal Properties of Carbon Nanotube–Copper Composites for Thermal Management Applications

    Directory of Open Access Journals (Sweden)

    Jia Chengchang

    2010-01-01

    Full Text Available Abstract Carbon nanotube–copper (CNT/Cu composites have been successfully synthesized by means of a novel particles-compositing process followed by spark plasma sintering (SPS technique. The thermal conductivity of the composites was measured by a laser flash technique and theoretical analyzed using an effective medium approach. The experimental results showed that the thermal conductivity unusually decreased after the incorporation of CNTs. Theoretical analyses revealed that the interfacial thermal resistance between the CNTs and the Cu matrix plays a crucial role in determining the thermal conductivity of bulk composites, and only small interfacial thermal resistance can induce a significant degradation in thermal conductivity for CNT/Cu composites. The influence of sintering condition on the thermal conductivity depended on the combined effects of multiple factors, i.e. porosity, CNTs distribution and CNT kinks or twists. The composites sintered at 600°C for 5 min under 50 MPa showed the maximum thermal conductivity. CNT/Cu composites are considered to be a promising material for thermal management applications.

  11. Thermal Properties of Carbon Nanotube–Copper Composites for Thermal Management Applications

    Science.gov (United States)

    2010-01-01

    Carbon nanotube–copper (CNT/Cu) composites have been successfully synthesized by means of a novel particles-compositing process followed by spark plasma sintering (SPS) technique. The thermal conductivity of the composites was measured by a laser flash technique and theoretical analyzed using an effective medium approach. The experimental results showed that the thermal conductivity unusually decreased after the incorporation of CNTs. Theoretical analyses revealed that the interfacial thermal resistance between the CNTs and the Cu matrix plays a crucial role in determining the thermal conductivity of bulk composites, and only small interfacial thermal resistance can induce a significant degradation in thermal conductivity for CNT/Cu composites. The influence of sintering condition on the thermal conductivity depended on the combined effects of multiple factors, i.e. porosity, CNTs distribution and CNT kinks or twists. The composites sintered at 600°C for 5 min under 50 MPa showed the maximum thermal conductivity. CNT/Cu composites are considered to be a promising material for thermal management applications. PMID:20672107

  12. Thermal Properties of Carbon Nanotube-Copper Composites for Thermal Management Applications

    Science.gov (United States)

    Chu, Ke; Guo, Hong; Jia, Chengchang; Yin, Fazhang; Zhang, Ximin; Liang, Xuebing; Chen, Hui

    2010-05-01

    Carbon nanotube-copper (CNT/Cu) composites have been successfully synthesized by means of a novel particles-compositing process followed by spark plasma sintering (SPS) technique. The thermal conductivity of the composites was measured by a laser flash technique and theoretical analyzed using an effective medium approach. The experimental results showed that the thermal conductivity unusually decreased after the incorporation of CNTs. Theoretical analyses revealed that the interfacial thermal resistance between the CNTs and the Cu matrix plays a crucial role in determining the thermal conductivity of bulk composites, and only small interfacial thermal resistance can induce a significant degradation in thermal conductivity for CNT/Cu composites. The influence of sintering condition on the thermal conductivity depended on the combined effects of multiple factors, i.e. porosity, CNTs distribution and CNT kinks or twists. The composites sintered at 600°C for 5 min under 50 MPa showed the maximum thermal conductivity. CNT/Cu composites are considered to be a promising material for thermal management applications.

  13. Active downhole thermal property measurement system for characterization of gas hydrate-bearing formations

    Energy Technology Data Exchange (ETDEWEB)

    Fukuhara, Masafumi; Fujii, Kasumi; Tertychnyi, Vladimir; Shandrygin, Alexander; Popov, Yuri; Matsubayashi, Osamu; Kusaka, Koji; Yasuda, Masato

    2005-07-01

    Gas hydrates dissociate or form when temperature and/or pressure conditions cross the equilibrium border. When we consider gas hydrates as an energy resource, understanding those parameters is very important for developing efficient production schemes. Therefore, thermal measurement is one of the key components of the characterization of the gas hydrate-bearing formation, not only statically but also dynamically. To estimate thermal properties such as thermal conductivity and diffusivity of subsurface formations, the conventional method has been to monitor temperature passively at several underground locations and interpret collected information with assumptions such as steady heat flow or relaxation from thermal disturbance by fluid flow, etc. Because the thermal properties are estimated based on several assumptions, these passive measurement methods sometimes leave a lot of uncertainties. On the other hand, active thermal property measurement, which could minimize those uncertainties, is commonly used in a laboratory and many types of equipment exist commercially for the purpose. The concept of measurement is very simple: creating a known thermal disturbance with a thermal source and then monitoring the response of the specimen. However, simply applying this method to subsurface formation measurement has many technical and logistical difficulties. In this paper, newly developed thermal property measurement equipment and its measurement methodology are described. Also discussed are the theoretical background for the application of the methodology to a gas hydrate-bearing formation through numerical simulation and the experimental results of laboratory mockup in a controlled environment. (Author)

  14. Thermal Properties of Double-Aluminized Kapton at Low Temperatures

    Science.gov (United States)

    Tuttle, J.; DiPirro, M.; Canavan, E.; Hait, T.

    2008-03-01

    Double-aluminized kapton (DAK) is commonly used in multi-layer insulation blankets in cryogenic systems. NASA plans to use individual DAK sheets in lightweight deployable shields for satellites carrying instruments. A set of these shields will reflect away thermal radiation from the sun, the earth, and the instrument's warm side and allow the instrument's cold side to radiate its own heat to deep space. In order to optimally design such a shield system, it is important to understand the thermal characteristics of DAK down to low temperatures. We describe experiments which measured the thermal conductivity and electrical resistivity down to 4 Kelvin and the emissivity down to 10 Kelvin.

  15. Characterization of the heat transfer properties of thermal interface materials

    Science.gov (United States)

    Fullem, Travis Z.

    Physicists have studied the thermal conductivity of solids for decades. As a result of these efforts, thermal conduction in crystalline solids is well understood; there are detailed theories describing thermal conduction due to electrons and phonons. Phonon scattering and transmission at solid/solid interfaces, particularly above cryogenic temperatures, is not well understood and more work is needed in this area. The desire to solve engineering problems which require good thermal contact between mating surfaces has provided enhanced motivation for furthering the state of the art on this topic. Effective thermal management is an important design consideration in microelectronic systems. A common technique for removing excess heat from an electronic device is to attach a heatsink to the device; it is desirable to minimize the thermal resistance between the device and the heatsink. This can be accomplished by placing a thermal interface material (TIM) between the two surfaces. Due to the ever-increasing power densities found in electronic components, there is a desire to design better TIMs, which necessitates the ability to characterize TIM bondlines and to better understand the physics of heat conduction through TIM bondlines. A micro Fourier apparatus which employs Pt thin film thermometers of our design has been built and is capable of precisely quantifying the thermal resistance of thermal interface materials. In the present work several types of commercially available TIMs have been studied using this apparatus, including: greases, filled epoxies, and thermally conductive pads. In the case of filled epoxies, bondlines of various thicknesses, ranging from thirty microns to several hundred microns, have been measured. The microstructure of these bondlines has been investigated using optical microscopy and acoustic microscopy. Measured values of thermal conductivity are considered in terms of microstructural features such as percolation networks and filler particle

  16. A Genetic Algorithm for Simultaneous Determination of Thin Films Thermal Transport Properties and Contact Resistance

    Institute of Scientific and Technical Information of China (English)

    Zhengxing HUANG; Zhen'an TANG; Ziqiang XU; Haitao DING; Yuqin GU

    2006-01-01

    A genetic algorithm (GA) was studied to simultaneously determine the thermal transport properties and the contact resistance of thin films deposited on a thick substrate. A pulsed photothermal reflectance (PPR) system was employed for the measurements. The GA was used to extract the thermal properties. Measurements were performed on SiO2 thin films of different thicknesses on silicon substrate. The results show that the GA accompanied with the PPR system is useful for the simultaneous determination of thermal properties of thin films on a substrate.

  17. Thermal Properties of epoxy composites with silicon carbide and/or graphite

    Science.gov (United States)

    Kim, Jungsoo; Kim, Yang Do; Nam, Dae Geun; Bae, Jong-Seong; Yeum, Jeong Hyun; Oh, Weontae

    2016-02-01

    Epoxy composites were fabricated with a filler of silicon carbide (SiC) and/or graphite to improve the thermal conductivity and thereby enhance the transfer of the heat from the light-emitting diode (LED) to the heat sink. The two fillers (SiC and graphite) were each added either separately, within a content range of 10 - 50 wt.%, or together to give a combined total content of 40 - 60 wt.%. The effect of the filler addition on the thermal and the mechanical properties of the epoxy composites was examined. The filler-induced change on the structural properties was investigated by using a morphological analysis of the epoxy composites, and the thermal conductivity was analyzed by measuring the thermal diffusivity, heat specific, and density. To confirm the adhesive property with aluminum, which is mostly used as the heat sink material were tested, the mechanical properties by using a bonding test with a modified tensile test. The thermal and the mechanical properties were improved with increasing filler content in the epoxy composites. In the case of combined filler addition, graphite was more effective than SiC in increasing the thermal properties. However, excessive filler addition reduced the epoxy's natural adhesive property and hence degraded the mechanical properties.

  18. Artificial nacre-like papers based on noncovalent functionalized boron nitride nanosheets with excellent mechanical and thermally conductive properties

    Science.gov (United States)

    Zeng, Xiaoliang; Ye, Lei; Yu, Shuhui; Li, Hao; Sun, Rong; Xu, Jianbin; Wong, Ching-Ping

    2015-04-01

    Inspired by the nano/microscale hierarchical structure and the precise inorganic/organic interface of natural nacre, we fabricated artificial nacre-like papers based on noncovalent functionalized boron nitride nanosheets (NF-BNNSs) and poly(vinyl alcohol) (PVA) via a vacuum-assisted self-assembly technique. The artificial nacre-like papers exhibit excellent tensile strength (125.2 MPa), on a par with that of the natural nacre, and moreover display a 30% higher toughness (2.37 MJ m-3) than that of the natural nacre. These excellent mechanical properties result from an ordered `brick-and-mortar' arrangement of NF-BNNSs and PVA, in which the long-chain PVA molecules act as the bridge to link NF-BNNSs via hydrogen bonds. The resulting papers also render high thermal conductivity (6.9 W m-1 K-1), and reveal their superiority as flexible substrates to support light-emitting-diode chips. The combined mechanical and thermal properties make the materials highly desirable as flexible substrates for next-generation commercial portable electronics.Inspired by the nano/microscale hierarchical structure and the precise inorganic/organic interface of natural nacre, we fabricated artificial nacre-like papers based on noncovalent functionalized boron nitride nanosheets (NF-BNNSs) and poly(vinyl alcohol) (PVA) via a vacuum-assisted self-assembly technique. The artificial nacre-like papers exhibit excellent tensile strength (125.2 MPa), on a par with that of the natural nacre, and moreover display a 30% higher toughness (2.37 MJ m-3) than that of the natural nacre. These excellent mechanical properties result from an ordered `brick-and-mortar' arrangement of NF-BNNSs and PVA, in which the long-chain PVA molecules act as the bridge to link NF-BNNSs via hydrogen bonds. The resulting papers also render high thermal conductivity (6.9 W m-1 K-1), and reveal their superiority as flexible substrates to support light-emitting-diode chips. The combined mechanical and thermal properties make

  19. Thermal property of biological tissues characterized by piezoelectric photoacoustic technique

    Institute of Scientific and Technical Information of China (English)

    GAO Chunming; ZHANG Shuyi; CHEN Yan; SHUI Xiuji; YANG Yuetao

    2004-01-01

    A photoacoustic piezoelectric method based on a simplified thermoelastic theory is employed to determine thermal diffusivities of biological tissues. The thermal diffusivities of porcine tissues with different preparation conditions, including fresh, dry and specially prepared conditions, are characterized. Comparing the experimental evaluated diffusivities of the tissues in three conditions with each other, it can be seen that the diffusivities of the fresh tissues are the biggest and the diffusivities of the specially prepared tissues are bigger than that of the dry ones generally. The results show that the piezoelectric photoacoustic method is especially effective for determining macro-effective (average) thermal diffusivities of biological materials with micro- inhomogeneity and easy to be performed, which can provide useful information for researching thermal characters of biological tissues.

  20. Effect of secondary weld thermal cycle on structure and properties

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper deals with structure and impact energy of weld HAZ of 10CrNi3MoV steel after secondary weld thermal cycle (t8/5=8(¨)s~120(¨)s; peak temperature Tm=750℃~1(¨)300℃). It is demonstrated that the coarse grain and structure produced by first thermal cycle keep unchanged after secondary thermal cycle above Ac1 critical temperature but below 1(¨)050(¨)℃. At the same time the low temperature impact energy decreases obviously with increasing t8/5. By metallurgical microscope and transmission electron microscope(TEM) , it is revealed that the effect of coarse grain and structure caused by secondary thermal cycle on low temperature impact energy.

  1. Preparation, physical property and thermal physical property of phase change microcapsule slurry and phase change emulsion

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Rui [Department of Chemical Engineering, Tsinghua University, Beijing 100084 (China); Xu, Hui; Zhang, Yingping [School of Architecture, Tsinghua University, Beijing 100084 (China)

    2003-12-01

    Phase change microcapsule slurry and phase change emulsion are two novel two-phase heat transfer fluids. Compared with a conventional single-phase heat transfer fluid such as water, their apparent specific heats in the phase change temperature range are greatly increased. Due to this, the heat transfer ability and energy transport ability can be obviously improved. Therefore, they have many potentially important applications in fields such as heating, ventilating, air-conditioning, refrigeration and heat exchangers. In this paper, a phase change emulsion was prepared by mixing film synthesis, and a phase change microcapsule slurry was prepared by in situ polymerization with polystyrene, polymethyl methacrylate, polyethyl methacrylate as encapsulation material, respectively. Physical properties, such as viscosity, diameter and its distribution of microcapsule and emulsion were investigated. The relationship between the concentration of tetradecane and physical properties have been discussed in detail. Meanwhile, the thermal physical properties of these two fluids were determined by DSC. Also, the influence of tetradecane concentration on phase change temperature and phase change heat has been discussed.

  2. Preparation, physical property and thermal physical property of phase change microcapsule slurry and phase change emulsion

    Energy Technology Data Exchange (ETDEWEB)

    Rui Yang [Tsinghua Univ., Dept. of Chemical Engineering, Beijing (China); Hui Xu; Yingping Zhang [Tsinghua Univ., School of Architecture, Beijing (China)

    2003-12-01

    Phase change microcapsule slurry and phase change emulsion are two novel two-phase heat transfer fluids. Compared with a conventional single-phase heat transfer fluid such as water, their apparent specific heats in the phase change temperature range are greatly increased. Due to this, the heat transfer ability and energy transport ability can be obviously improved. Therefore, they have many potentially important applications in fields such as heating, ventilating, air-conditioning, refrigeration and heat exchangers. In this paper, a phase change emulsion was prepared by mixing film synthesis, and a phase change microcapsule slurry was prepared by in situ polymerization with polystyrene, polymethyl methacrylate, polyethyl methacrylate as encapsulation material, respectively. Physical properties, such as viscosity, diameter and its distribution of microcapsule and emulsion were investigated. The relationship between the concentration of tetradecane and physical properties have been discussed in detail. Meanwhile, the thermal physical properties of these two fluids were determined by DSC. Also, the influence of tetradecane concentration on phase change temperature and phase change heat has been discussed. (Author)

  3. Studies and Properties of Ceramics with High Thermal Conductivity

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The sintering technology of the AlN ceramics power were discussed. It is discussed that the compound sintering aids is consistent with the enhancement of the the thermal conductivity of AlN ceramics, and sintering technics is helped to the improvement of density. It is analyzed how to sinter machinable AlN ceramics with high thermal conductivity. And the microstructure of compound ceramics based on AlN was studied.

  4. Soil thermal resistivity and thermal stability measuring instrument. Volume 2: Manual for operation and use of the thermal property analyzer and statistical weather analysis program to determine thermal design parameters

    Science.gov (United States)

    Boggs, S. A.; Radhakrishna, H. S.; Chu, F. Y.; Ford, G. L.; Griffin, J. D. A.; Steinmanis, J.

    1981-11-01

    Numerous considerations influence the thermal design of an underground power cable, including the soil thermal resistivity, thermal diffusivity and thermal stability. Each of these properties is a function of soil moisture which is in turn a function of past weather, soil composition, and biological burden. The Neher-McGrath formalism has been widely used for thermal cable design. However, this formalism assumes knowledge of soil thermal properties (resistivity and diffusivity). For design purposes, these parameters should be treated statistically, since weather varies greatly from year to year. As well, soil thermal property surveys are normally required along the route to assess the thermal quality of the native soil. This project is intended to fill the gap between the need to carry out thermal design and the use of the Neher-McGrath formalism which is normally employed. This goal has been addressed through: development of instrumentation and methods of measuring soil thermal properties in situ and in the laboratory; recommendation of methods for conducting soil surveys along a proposed cable route and of assessing the thermal quality of soils; and development of a computerized method to treat soil thermal design parameters on a statistical basis using computerized weather records as supplied by the US Environmental Data Service. The use of the methods and instrumentation developed as a result of this contract should permit less conservative thermal design thereby improving the economics of underground transmission. As well, these techniques and instrumentation facilitate weather-dependent prediction of cable ampacity for installed cables, monitoring of backfill thermal stability, and many other new practices.

  5. A study on thermal properties of biodegradable polymers using photothermal methods

    Science.gov (United States)

    Siqueira, A. P. L.; Poley, L. H.; Sanchez, R.; da Silva, M. G.; Vargas, H.

    2005-06-01

    In this work is reported the use of photothermal techniques applied to the thermal characterization of biodegradable polymers of Polyhydroxyalkanoates (PHAs) family. This is a family of polymer produced by bacteria using renewable resources. It exhibits thermoplastic properties and therefore it can be an alternative product for engineering plastics, being also applied as packages for food industry and fruits. Thermal diffusivities were determined using the open photoacoustic cell (OPC) configuration. Specific heat capacity measurements were performed monitoring temperature of the samples under white light illumination against time. Typical values obtained for the thermal properties are in good agreement with those found in the literature for other polymers. Due to the incorporation of hydroxyvalerate in the monomer structure, the thermal diffusivity and thermal conductivity increase reaching a saturation value, otherwise the specific thermal capacity decreases as the concentration of the hydroxyvalerate (HV) increases. These results can be explained by polymers internal structure and are allowing new applications of these materials.

  6. Microstructure and thermal properties of recyclable Si_p/1199Al composites

    Institute of Scientific and Technical Information of China (English)

    XIU Zi-yang; CHEN Guo-qing; YANG Wen-shu; SONG Mei-hui; WU Gao-hui

    2009-01-01

    Recyclable Si_p/1199Al composites with high volume fraction of Si particles were fabricated by squeeze-casting method.The microstructure was observed and the thermal properties were tested and calculated by theoretical models.Si_p/1199Al composites are all dense and macroscopically homogeneous without any particle clustering.The interface of Si_p/1199Al is clean,smooth and free from any interfacial reaction products.Si_p/1199Al composites have high thermal diffusivity (65.083 mm~2/s) and thermal conductivity (168.211 W/(m·℃)).The specific heat capacity of Si_p/1199Al composites at constant pressure increases while the thermal diffusivity and thermal conductivity decrease with increasing temperature.Annealing treatment could improve the thermal properties.The results of Maxwell model and P.G.model are higher than those of experiment.

  7. Thermal properties of composite materials with a complex fractal structure

    Science.gov (United States)

    Cervantes-Álvarez, F.; Reyes-Salgado, J. J.; Dossetti, V.; Carrillo, J. L.

    2014-06-01

    In this work, we report the thermal characterization of platelike composite samples made of polyester resin and magnetite inclusions. By means of photoacoustic spectroscopy and thermal relaxation, the thermal diffusivity, conductivity and volumetric heat capacity of the samples were experimentally measured. The volume fraction of the inclusions was systematically varied in order to study the changes in the effective thermal conductivity of the composites. For some samples, a static magnetic field was applied during the polymerization process, resulting in anisotropic inclusion distributions. Our results show a decrease in the thermal conductivity of some of the anisotropic samples, compared to the isotropic randomly distributed ones. Our analysis indicates that the development of elongated inclusion structures leads to the formation of magnetite and resin domains, causing this effect. We correlate the complexity of the inclusion structure with the observed thermal response through a multifractal and lacunarity analysis. All the experimental data are contrasted with the well known Maxwell-Garnett effective media approximation for composite materials.

  8. Low temperature thermal properties of composite insulation systems

    Science.gov (United States)

    Fabian, P. E.; Bauer-McDaniel, T. S.; Reed, R. P.

    The thermal contraction and thermal conductivity of candidate composite insulation systems for the International Thermonuclear Experimental Reactor toroidal field coils were measured from 295 to 4 K. Matrix materials consisted of a diglycidyl ether of bisphenol-A epoxy suitable for vacuum impregnation, a tetrafunctional epoxy suitable for pre-impregnation, a polyimide system produced by a high-pressure laminating process, and a bismaleimide system. These matrix materials were combined with S-2 glass fabric and various barrier systems, such as ceramic and organic coatings, polyimide film and mica/glass. Thermal contraction was measured by the strain gauge method in which strain gauges are attached directly to the specimen. The thermal contraction in the through-thickness direction was different at 4 K for each resin system and changed slightly with the addition of electrical barriers. The thermal conductivity of the materials, with and without the electrical barriers, was similar at 4 K, but more distinctive at higher temperatures. The systems with the ceramic coatings exhibited the highest thermal conductivities at all temperatures.

  9. Cellulose nanocrystal/polyolefin biocomposites prepared by solid-state shear pulverization: Superior dispersion leading to synergistic property enhancements

    Science.gov (United States)

    Krishnan A. Iyer; Gregory T. Schueneman; John M. Torkelson

    2015-01-01

    Cellulose nanocrystals (CNCs), a class of renewable bionanomaterials with excellent mechanical properties, have gained major interest as filler for polymers. However, challenges associated with effective CNC dispersion have hindered the production of composites with desired property enhancements. Here, composites of polypropylene (PP) and low density polyethylene (LDPE...

  10. Quick Maintenance for High Voltage Equipment with the New Not Toxic Boron Nitride Powder (BN100) Superior Thermal Conductive and Lightweight Filler

    Science.gov (United States)

    2005-07-13

    used for the either mechanical and thermal test campaign is the EQM of a battery discharge regulator (BDR) module used in a Main Bus Regulator Unit...shown in its time sequence: Figure 2-6 Acc.#1 Acc.#2 3 - THERMAL TEST ON THE BDR BREADBOARD The test campaign is aimed at demonstrating...on the thermal test campaign The results resumed in Table 3-1 show a wide difference in terms of thermal dissipation in favour of the case with

  11. Examinations of Selected Thermal Properties of Packages of SiC Schottky Diodes

    Directory of Open Access Journals (Sweden)

    Bisewski Damian

    2016-09-01

    Full Text Available This paper describes the study of thermal properties of packages of silicon carbide Schottky diodes. In the paper the packaging process of Schottky diodes, the measuring method of thermal parameters, as well as the results of measurements are presented. The measured waveforms of transient thermal impedance of the examined diodes are compared with the waveforms of this parameter measured for commercially available Schottky diodes.

  12. MAPTIP - Marine Aerosol Properties and Thermal Imager Performance : Summary and initial results

    NARCIS (Netherlands)

    Eijk, A.M.J. van; Leeuw, G. de; Jensen, D.R.

    1995-01-01

    The marine aerosol properties and thermal imager performance trial (MAPTIP) was conducted by NATO AC/243 Panel 04/RSG.8 and 04/RSG.5 in the Dutch coastal waters during the fall of 1993. The main objectives of the trial were (1) to assess marine boundary layer effects on thermal imaging systems and (

  13. Prediction of Geomechanical Properties from Thermal Conductivity of Low-Permeable Reservoirs

    Science.gov (United States)

    Chekhonin, Evgeny; Popov, Evgeny; Popov, Yury; Spasennykh, Mikhail; Ovcharenko, Yury; Zhukov, Vladislav; Martemyanov, Andrey

    2016-04-01

    A key to assessing a sedimentary basin's hydrocarbon prospect is correct reconstruction of thermal and structural evolution. It is impossible without adequate theory and reliable input data including among other factors thermal and geomechanical rock properties. Both these factors are also important in geothermal reservoirs evaluation and carbon sequestration problem. Geomechanical parameters are usually estimated from sonic logging and rare laboratory measurements, but sometimes it is not possible technically (low quality of the acoustic signal, inappropriate borehole and mud conditions, low core quality). No wonder that there are attempts to correlate the thermal and geomechanical properties of rock, but no one before did it with large amount of high quality thermal conductivity data. Coupling results of sonic logging and non-destructive non-contact thermal core logging opens wide perspectives for studying a relationship between the thermal and geomechanical properties. More than 150 m of full size cores have been measured at core storage with optical scanning technique. Along with results of sonic logging performed with Sonic Scanner in different wells drilled in low permeable formations in West Siberia (Russia) it provided us with unique data set. It was established a strong correlation between components of thermal conductivity (measured perpendicular and parallel to bedding) and compressional and shear acoustic velocities in Bazhen formation. As a result, prediction of geomechanical properties via thermal conductivity data becomes possible, corresponding results was demonstrated. The work was supported by the Russian Ministry of Education and Science, project No. RFMEFI58114X0008.

  14. A review of wood thermal pretreatments to improve wood composite properties

    Science.gov (United States)

    Manuel Raul Pelaez-Samaniego; Vikram Yadama; Eini Lowell; Raul. Espinoza-Herrera

    2013-01-01

    The objective of this paper is to review the published literature on improving properties of wood composites through thermal pretreatment of wood. Thermal pretreatment has been conducted in moist environments using hot water or steam at temperatures up to 180 and 230 ˚C, respectively, or in dry environments using inert gases at temperatures up to 240 ...

  15. Tribological properties of the two-step thermally deposited chromium films

    NARCIS (Netherlands)

    Lazauskas, A.; Baltrusaitis, J.; Grigaliunas, V.; Baltusnikas, A.; Abakeviciene, B.; Polcar, T.

    2013-01-01

    Chromium thin films were prepared on glass substrate via a two-step thermal deposition and their structural, chemical and tribological properties were determined. The X-ray diffraction pattern of the two-step thermally deposited chromium film showed the presence of well-defined body-centered cubic C

  16. Molecular structure-property correlations from optical nonlinearity and thermal-relaxation dynamics.

    Science.gov (United States)

    Bhattacharyya, Indrajit; Priyadarshi, Shekhar; Goswami, Debabrata

    2009-02-01

    We apply ultrafast single beam Z-scan technique to measure saturation absorption coefficients and nonlinear-refraction coefficients of primary alcohols at 1560 nm. The nonlinear effects result from vibronic transitions and cubic nonlinear-refraction. To measure the pure total third-order nonlinear susceptibility, we removed thermal effects with a frequency optimized optical-chopper. Our measurements of thermal-relaxation dynamics of alcohols, from 1560 nm thermal lens pump and 780 nm probe experiments revealed faster and slower thermal-relaxation timescales, respectively, from conduction and convection. The faster timescale accurately predicts thermal-diffusivity, which decreases linearly with alcohol chain-lengths since thermal-relaxation is slower in heavier molecules. The relation between thermal-diffusivity and alcohol chain-length confirms structure-property relationship.

  17. Probing thermal transitions and structural properties of gluten proteins using ultrasound

    National Research Council Canada - National Science Library

    Elmehdi, H M; Scanlon, M G; Page, J H; Kovacs, M I. P

    2013-01-01

    To probe the thermal and structural properties of gluten proteins using ultrasound.A new ultrasonic approach for characterizing the quality of wheat gluten proteins is described. Low frequency (50 kHz...

  18. Morphology and thermal properties of recycled polyacrylonitrile fiber blends with poly(ethylene terephthalate): Microstructural characterization

    CSIR Research Space (South Africa)

    Adegbola, TA

    2016-04-01

    Full Text Available of Applied Polymer Science, vol. 133: DOI: 10.1002/app.43777 Morphology and thermal properties of recycled polyacrylonitrile fiber blends with polyethylene terephthalate: Microstructural characterization Adegbola TA Rotimi, SE Suprakas, SR ABSTRACT...

  19. Microwave palaeointensities from Holocene age Hawaiian lavas: Investigation of magnetic properties and comparison with thermal palaeointensities

    OpenAIRE

    Pressling, Nicola; Brown, Maxwell; Gratton, Martin; Shaw, John; Gubbins, David

    2007-01-01

    Microwave palaeointensities from Holocene age Hawaiian lavas: Investigation of magnetic properties and comparison with thermal palaeointensities UNITED KINGDOM (Pressling, Nicola) UNITED KINGDOM Received: 2006-10-31 Revised: 2007-03-05 Accepted: 2007-03-22

  20. Effect of nickel substitution on thermal properties of Na0.9CoO2

    Indian Academy of Sciences (India)

    J Meena Devi; N Gayathri; A Bharathi; K Ramachandran

    2007-08-01

    We report on the effect of nickel substitution in Na0.9CoO2 by examining their thermal properties at room temperature. Experimental results indicate that thermoelectric efficiency is enhanced upon nickel substitution in sodium cobaltate.

  1. The Distributed Thermal Perturbation Sensor: A New Tool for In Situ Estimation of Formation Thermal Properties and Geothermal Heat Flux

    Science.gov (United States)

    Freifeld, B. M.; Kryder, L.; Gilmore, K.; Henninges, J.; Onstott, T. C.; Lisa, P.

    2007-12-01

    Variations in geothermal heat flux provide a window into a diverse array of geological processes including plate tectonics and crustal fluid circulation. The Distributed Thermal Perturbation Sensor (DTPS) is a novel device that can simultaneously determine formation thermal properties and heat flux in situ. The device consists of a fiber- optic distributed temperature sensor (DTS) and a heat trace cable installed along the axis of a borehole. To operate the DTPS, the sensor is backfilled into a borehole and the disturbed thermal field is allowed to dissipate. A baseline temperature profile is subsequently recorded. Next, the heat trace cable is used to provide constant heating along the borehole and the thermal transient is recorded. DTS monitoring continues after heating concludes during the ensuing cool-down phase. To obtain in situ estimates for thermal properties and heat flux, simple conductive or conductive-convective models can be used to interpret the data. Given the 1 meter spatial resolution of the DTS - the DTPS provides thermal property and heat flux estimates at similar spatial resolution. To date, the DTPS has been deployed at three continental sites: (1) in the Amargosa Valley, Amargosa, NV, USA, to characterize groundwater flow through fractured volcanic tuffs, (2) in a deep permafrost boring within an Archean mafic volcanic belt at the High Lake Project Site (67°22"N, 110°50"W), Nunavut, Canada, and (3) as part of the monitoring program at CO2SINK, a carbon geosequestration experiment being conducted in Ketzin, Germany. The authors present results from these three sites and discuss potential modalities for future deployment in suboceanic environments.

  2. Eutectic mixtures of some fatty acids for low temperature solar heating applications: Thermal properties and thermal reliability

    Energy Technology Data Exchange (ETDEWEB)

    Sari, Ahmet [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)]. E-mail: asari@gop.edu.tr

    2005-10-01

    The thermal properties and thermal reliability of the eutectic mixtures of lauric acid-myristic acid (LA-MA), lauric acid-palmitic acid (LA-PA), myristic acid-stearic acid (MA-SA) as phase change material (PCM) were determined after repeated melt/freeze cycles by the method of differential scanning calorimeter (DSC). The DSC thermal analysis results indicate that the binary systems of LA-MA in ratio of 66.0:34.0 wt.%, LA-PA in ratio of 69.0:31.0 wt.% and MA-SA in ratio of 64.0:36.0 wt.% form eutectic mixture with a melting temperature of 34.2 deg. C, 35.2 deg. C and 44.1 deg. C, and with a latent heat of fusion of 166.8 J g{sup -1}, 166.3 J g{sup -1} and 182.4 J g{sup -1}, respectively. The changes in the melting temperatures and the latent heats of fusion are in the range of -0.31 deg. C-0.14 deg. C and 0.9%-2.4% for LA-MA, -0.40 deg. C-0.23 deg. C and 1.5%-3.0% for LA-PA, and 1.11 deg. C-0.26 deg. C and -1.10%-2.2% for MA-SA during the 1460 thermal cycles. Based on the results, it can be concluded that the studied PCMs have good thermal properties and thermal reliability for a four-year energy storage period, which corresponds to 1460 thermal cycles, in terms of the change in their melting temperatures and latent heats of fusion.

  3. Thermal diffusivity and mechanical properties of polymer matrix composites

    Science.gov (United States)

    Weidenfeller, Bernd; Anhalt, Mathias; Kirchberg, Stefan

    2012-11-01

    Polypropylene-iron-silicon (FeSi) composites with spherical particles and filler content from 0 vol. % to 70 vol. % are prepared by kneading and injection molding. Modulus, crystallinity, and thermal diffusivity of samples are characterized with dynamic mechanical analyzer, differential scanning calorimeter, and laser flash method. Modulus as well as thermal diffusivity of the composites increase with filler fraction while crystallinity is not significantly affected. Measurement values of thermal diffusivity are close to the lower bound of the theoretical Hashin-Shtrikman model. A model interconnectivity shows a poor conductive network of particles. From measurement values of thermal diffusivity, the mean free path length of phonons in the amorphous and crystalline structure of the polymer and in the FeSi particles is estimated to be 0.155 nm, 0.450 nm, and 0.120 nm, respectively. Additionally, the free mean path length of the temperature conduction connected with the electrons in the FeSi particles together with the mean free path in the particle-polymer interface was estimated. The free mean path is approximately 5.5 nm and decreases to 2.5 nm with increasing filler fraction, which is a result of the increasing area of polymer-particle interfaces. A linear dependence of thermal diffusivity with the square root of the modulus independent on the measurement temperature in the range from 300 K to 415 K was found.

  4. Thermal Cycling Effects on the Thermoelectric Properties of n-Type In, Ce based Skutterudite Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Krishnendu; Subramanian, Mas A.; Good, Morris S.; Roberts, Kamandi C.; Hendricks, Terry J.

    2012-06-14

    N-type In-filled CoSb3 are known skutterudite compounds that have shown promising thermoelectric (TE) properties resulting in high dimensionless figure of merit values at elevated temperatures. Their use in various waste heat recovery applications will require that they survive and operate after exposure to harsh thermal cycling environments. This research focused on uncovering the thermal cycling effects on thermoelectric properties of n-type In0.2Co4Sb12 and In0.2Ce0.15Co4Sb12 skutterudite compositions as well as quantifying their temperature-dependent structural properties (elastic modulus, shear modulus, and Poisson's ratio). It was observed that the Seebeck coefficient and resistivity increased only slightly in the double-filled In,Ce skutterudite materials upon thermal cycling. In the In-filled skutterudites the Seebeck coefficient remained approximately the same on thermal cycling, while electrical resistivity increased significantly after thermal cycling. Results also show that thermal conductivity marginally decreases in the case of In-filled skutterudites, whereas the reduction is more pronounced in In, Ce-based skutterudite compounds. The possible reason for this kind of reduction can be attributed to grain pinning effects due to formation of nano inclusions. High temperature structural property measurements (i.e., Young's modulus and shear modulus) are also reported and the results show that these structural properties decrease slowly as temperature increases and the compounds are structurally stable after numerous thermal cycles.

  5. Effect of organoclay on the orientation and thermal properties of liquid-crystalline polymers

    CSIR Research Space (South Africa)

    Bandyopadhyay, J

    2007-08-01

    Full Text Available on th Thermal Properties of Liquid-Crystallin Polymers a Introduction Liquid-crystalline polymers (LCP) are well known for their excellent properties, such as high strength and stiffness, low melt viscosity, and their high chemical and thermal...] they confirmed the very high degree of dispersion of organoclay in the LCP matrix, because of the formation of hydrogen bonds between the pendent pyridyl group in the LCP and the hydroxyl group of the surfactant residing at the surface of organoclay...

  6. Experimental measurements of thermal properties of high-temperature refractory materials used for thermal energy storage

    Science.gov (United States)

    El-Leathy, Abdelrahman; Jeter, Sheldon; Al-Ansary, Hany; Abdel-Khalik, Said; Golob, Matthew; Danish, Syed Noman; Saeed, Rageh; Djajadiwinata, Eldwin; Al-Suhaibani, Zeyad

    2016-05-01

    This paper builds on studies conducted on thermal energy storage (TES) systems that were built as a part of the work performed for a DOE-funded SunShot project titled "High Temperature Falling Particle Receiver". In previous studies, two small-scale TES systems were constructed for measuring heat loss at high temperatures that are compatible with the falling particle receiver concept, both of which had shown very limited heat loss. Through the course of those studies, it became evident that there was a lack of information about the thermal performance of some of the insulating refractory materials used in the experiments at high temperatures, especially insulating firebrick and perlite concrete. This work focuses on determining the thermal conductivities of those materials at high temperatures. The apparatus consists of a prototype cylindrical TES bin built with the same wall construction used in previous studies. An electric heater is placed along the centerline of the bin, and thermocouples are used to measure temperature at the interfaces between all layers. Heat loss is measured across one of the layers whose thermal conductivity had already been well established using laboratory experiments. This value is used to deduce the thermal conductivity of other layers. Three interior temperature levels were considered; namely, 300°C, 500°C, and 700°C. Results show that the thermal conductivity of insulating firebrick remains low (approximately 0.22 W/m.K) at an average layer temperature as high as 640°C, but it was evident that the addition of mortar had an impact on its effective thermal conductivity. Results also show that the thermal conductivity of perlite concrete is very low, approximately 0.15 W/m.K at an average layer temperature of 360°C. This is evident by the large temperature drop that occurs across the perlite concrete layer. These results should be useful for future studies, especially those that focus on numerical modeling of TES bins.

  7. Tracking the thermal properties of the lower continental crust

    DEFF Research Database (Denmark)

    Ray, Labani; Förster, Hans-Jürgen; Förster, Andrea

    2015-01-01

    terms of sample size or physical-chemical-mechanical condition) are not available, bulk TC of high-grade metamorphic rocks with low anisotropy and porosity could be satisfactorily good assessed from modal mineralogy, using the data sets for mineral TC applied in this study. Further work is required......In this study, the bulk thermal conductivity (TC) of 26 rock samples representing different types of granulite-facies rocks, i.e., felsic, intermediate and mafic granulites, from the Southern Granulite Province, India, is measured at dry and saturated conditions with the optical-scanning method....... Thermal conductivity is also calculated from modal mineralogy (determined by XRD and EPMA), applying several mixing models commonly used in thermal studies. Most rocks are fine- to medium-grained equigranular in texture. All samples are isotropic to weakly anisotropic and possess low porosities (

  8. Effects of thermal cycling on magnetic properties of lunar analogs

    Science.gov (United States)

    Barron, A. M.; Shive, P. N.

    1984-01-01

    An experimental study has been performed to determine whether stresses associated with thermal cycling cracks can affect the coercivity of remanence carried by iron in lunar samples. Initially, samples were cycled up to 100 times in a refrigerator over a period of about 30 min per cycle. In a second set of experiments, samples were dipped directly into liquid nitrogen up to 100 times at about 1 min per cycle. Comparison of AF demagnetization curves of weak field anhysteretic remanent magnetization before and after cycling revealed no systematic differences. Calculations based on a model of spherical iron grains within olivine or troilite indicate that it is unlikely that the iron will crack under thermal stress. Thus, thermal cycling does not appear to provide an explanation for increasing the stability of remanence in samples from the lunar surface.

  9. Algorithm to optimize transient hot-wire thermal property measurement.

    Science.gov (United States)

    Bran-Anleu, Gabriela; Lavine, Adrienne S; Wirz, Richard E; Kavehpour, H Pirouz

    2014-04-01

    The transient hot-wire method has been widely used to measure the thermal conductivity of fluids. The ideal working equation is based on the solution of the transient heat conduction equation for an infinite linear heat source assuming no natural convection or thermal end effects. In practice, the assumptions inherent in the model are only valid for a portion of the measurement time. In this study, an algorithm was developed to automatically select the proper data range from a transient hot-wire experiment. Numerical simulations of the experiment were used in order to validate the algorithm. The experimental results show that the developed algorithm can be used to improve the accuracy of thermal conductivity measurements.

  10. Algorithm to optimize transient hot-wire thermal property measurement

    Science.gov (United States)

    Bran-Anleu, Gabriela; Lavine, Adrienne S.; Wirz, Richard E.; Kavehpour, H. Pirouz

    2014-04-01

    The transient hot-wire method has been widely used to measure the thermal conductivity of fluids. The ideal working equation is based on the solution of the transient heat conduction equation for an infinite linear heat source assuming no natural convection or thermal end effects. In practice, the assumptions inherent in the model are only valid for a portion of the measurement time. In this study, an algorithm was developed to automatically select the proper data range from a transient hot-wire experiment. Numerical simulations of the experiment were used in order to validate the algorithm. The experimental results show that the developed algorithm can be used to improve the accuracy of thermal conductivity measurements.

  11. Morphology, Mechanical and Thermal Properties of PBT-TiO2 Polymer Nanocomposite

    OpenAIRE

    Metanawin Tanapak; Jamjumrus Anusorn; Metanawin Siripan

    2015-01-01

    This research aims to study the effects of the TiO2 in PBT composite fibers on the thermal properties, mechanical properties and photocatalytic properties of the polymer composite. The results showed that the tensile strength of the TiO2/PBT fibers decreased with increasing in the content of TiO2 in polymer matrix. The content of TiO2 in composite fibers did not affect the thermal properties of the fibers but the %crystalline of the composite fibers were increased with content of TiO2 in the ...

  12. Studies on Mechanical, Thermal, and Morphological Properties of Glass Fibre Reinforced Polyoxymethylene Nanocomposite

    Directory of Open Access Journals (Sweden)

    K. Mohan Babu

    2014-01-01

    Full Text Available Polyoxymethylene is a material which has excellent mechanical properties similar to Nylon-6 filled with 30% GF. 75% POM and 25% glass fibre (POMGF were blended with nanoclay to increase the tensile and flexural properties. Samples were extruded in twin screw extruder to blend POMGF and (1%, 3%, and 5% Cloisite 25A nanoclay and specimens were prepared by injection moulding process. The tensile properties, flexural properties, impact strength, and hardness were investigated for the nanocomposites. The fibre pull-outs, fibre matrix adhesion, and cracks in composites were investigated by using scanning electron microscopy. 1% POMGF nanocomposite has low water absorption property. Addition of nanoclay improves the mechanical properties and thermal properties marginally. Improper blending of glass fibre and nanoclay gives low tensile strength and impact strength. SEM image shows the mixing of glass fibre and nanoclay among which 1% POMGF nanocomposite shows better properties compared to others. The thermal stability decreased marginally only with the addition of nanoclay.

  13. Spectral, coordination and thermal properties of 5-arylidene thiobarbituric acids

    Science.gov (United States)

    Masoud, Mamdouh S.; El-Marghany, Adel; Orabi, Adel; Ali, Alaa E.; Sayed, Reham

    2013-04-01

    Synthesis of 5-arylidine thiobarbituric acids containing different functional groups with variable electronic characters were described and their Co2+, Ni2+ and Cu2+ complexes. The stereochemistry and mode of bonding of 5-(substituted benzylidine)-2-TBA complexes were achieved based on elemental analysis, spectral (UV-VIS, IR, 1H NMR, MS), magnetic susceptibility and conductivity measurements. The ligands were of bidentate and tridentate bonding through S, N and O of pyrimidine nucleolus. All complexes were of octahedral configuration. The thermal data of the complexes pointed to their stability. The mechanism of the thermal decomposition is discussed. The thermodynamic parameters of the dissociation steps were evaluated and discussed.

  14. Effect of Thermal Treatment on Fracture Properties and Adsorption Properties of Spruce Wood

    Directory of Open Access Journals (Sweden)

    Takato Nakano

    2013-09-01

    Full Text Available The effect of thermal treatment on spruce is examined by analyzing the fracture and hygroscopic properties. Specimens were heated at temperatures within the range 120–200 °C for 1 h. Fracture energy was measured using a single-edge notched bending test and the strain-softening index was estimated by dividing the fracture energy by the maximum load. Adsorption properties were estimated using adsorption isotherms. Fiber saturation points (FSPs were estimated by extrapolating the moisture adsorption isotherm curve. Langmuir’s adsorption coefficient and number of adsorption sites were obtained using Langmuir’s theory and the Hailwood-Horrobin theory, respectively. The fracture energy, FSPs, and specimen weights decreased at temperatures higher than 150 °C, but the critical point for the strain-softening index and the number of adsorption sites was shown to be 180 °C. We hypothesize that the fracture energy and FSP depend on the chemical structure of the cell wall, whereas the strain-softening behavior may be influenced by the number of adsorption sites, and in turn the number of hydrogen bonds in hemicellulose.

  15. Covalent immobilization of nisin on multi-walled carbon nanotubes: superior antimicrobial and anti-biofilm properties

    Science.gov (United States)

    Qi, Xiaobao; Poernomo, Gunawan; Wang, Kean; Chen, Yuan; Chan-Park, Mary B.; Xu, Rong; Chang, Matthew Wook

    2011-04-01

    Despite unique and useful properties of multi-walled carbon nanotubes (MWNTs) such as high strength and a low synthesis cost, their weak antimicrobial property hampers their use as an antimicrobial material. Herein, we demonstrate that the immobilization of nisin, a natural and inexpensive antimicrobial peptide, with poly(ethylene glycol) (PEG1000) as a linker significantly enhanced the antimicrobial and anti-biofilm properties of MWNTs. The MWNT-nisin composite showed up to 7-fold higher antimicrobial property than pristine MWNTs against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis. Moreover, the MWNT-nisin composite had a dramatically improved capability to prevent biofilm formation both on a deposited film and in suspension. In particular, the MWNT-nisin deposit film exhibited a 100-fold higher anti-biofilm property than the MWNT deposit film. Further, it has been shown that PEG and nisin are covalently attached to MWNTs with excellent stability against leaching. We envision that our novel MWNT-nisin composite can serve as an effective and economical antimicrobial material.

  16. Moisture dependent thermal properties of hydrophilic mineral wool: application of the effective media theory

    Directory of Open Access Journals (Sweden)

    Iñigo Antepara

    2015-09-01

    Full Text Available Thermal properties of mineral wool based materials appear to be of particular importance for their practical applications because the majority of them is used in the form of thermal insulation boards. Every catalogue list of any material producer of mineral wool contains thermal conductivity, sometimes also specific heat capacity, but they give only single characteristic values for dry state of material mostly. Exposure to outside climate or any other environment containing moisture can negatively affect the thermal insulation properties of mineral wool. Nevertheless, the mineral wool materials due to their climatic loading and their environmental exposure contain moisture that can negatively affect their thermal insulation properties. Because the presence of water in mineral wool material is undesirable for the majority of applications, many products are provided with hydrophobic substances. Hydrophilic additives are seldom used in mineral wool products. However, this kind of materials has a good potential for application for instance in interior thermal insulation systems, masonry desalination, green roofs, etc. For these materials, certain moisture content must be estimated and thus their thermal properties will be different than for the dry state. On this account, moisture dependent thermal properties of hydrophilic mineral wool (HMW are studied in a wide range of moisture content using a pulse technique. The experimentally determined thermal conductivity data is analysed using several homogenization formulas based on the effective media theory. In terms of homogenization, a porous material is considered as a mixture of two or three phases. In case of dry state, material consists from solid and gaseous phase. When moistened, liquid phase is also present. Mineral wool consists of the solid phase represented by basalt fibers, the liquid phase by water and the gaseous phase by air. At first, the homogenization techniques are applied for the

  17. Development of high performance nano-porous polyethersulfone ultrafiltration membranes with hydrophilic surface and superior antifouling properties

    Energy Technology Data Exchange (ETDEWEB)

    Rahimpour, Ahmad, E-mail: ahmadrahimpour@yahoo.com [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of); Madaeni, Sayed Siavash [Membrane Research Center, Department of Chemical Engineering, Razi University, Kermanshah (Iran, Islamic Republic of); Jahanshahi, Mohsen [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of); Mansourpanah, Yaghoub [Department of Chemistry, Faculty of Science, Lorestan University, Khorramabad (Iran, Islamic Republic of); Mortazavian, Narmin [Nanobiotechnology Research Laboratory, Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of)

    2009-08-30

    Hydrophilic nano-porous polyethersulfone ultrafiltration membranes were developed for milk concentration. The membranes were prepared from new dope solution containing polyethersulfone (PES)/polyvinylpirrolidone (PVP)/polyethyleneglycole (PEG)/cellulose acetate phthalate (CAP)/acrylic acid/Triton X-100 using phase inversion induced by immersion precipitation technique. This casting solution leads to formation of new hydrophilic membranes. The morphological studies were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). In addition, the hydrophilicity and performance of membranes were examined by contact angel measurements and cross-flow filtration (pure water flux, milk water permeation, protein rejection and antifouling measurements). The contact angle measurements indicate that a surface with superior hydrophilicity was obtained for PES membranes. Two concentrations of PES (16 and 14.4 wt.%) and two different non-solvents (pure water and mixtures of water and IPA) were used for preparation of membranes. The morphological studies showed that the higher concentration of PES and the presence of IPA in the gelation media results in formation of a membrane with a dense top and sub-layer with small pores on the surface. The pure water flux of membranes was decreased when higher polymer concentration and mixtures of water and IPA were employed for membrane formation. On the other hand, the milk water permeation and protein rejection were increased using mixtures of water and IPA as non-solvent. Furthermore, the fouling analysis of the membranes demonstrated that the membrane surface with fewer tendencies for fouling was obtained.

  18. Enhanced functional properties of tannic acid after thermal hydrolysis

    Science.gov (United States)

    Thermal hydrolysis processing of fresh tannic acid was carried out in a closed reactor at four different temperatures (65, 100, 150 and 200°C). Pressures reached in the system were 1.3 and 4.8 MPa at 150 and 200°C, respectively. Hydrolysis products (gallic acid and pyrogallol) were separated and qua...

  19. Worldwide distribution of soil dielectric and thermal properties

    NARCIS (Netherlands)

    Hendrickx, J.M.H.; Dam, R.L. van; Borchers, B.; Curtis, J.; Lensen, H.A.; Harmon, R.

    2003-01-01

    Ground penetrating radar and thermal sensors hold much promise for the detection of non-metallic land mines. In previous work we have shown that the performance of ground penetrating radar strongly depends on field soil conditions such as texture, water content, and soil-water salinity since these s

  20. Worldwide distribution of soil dielectric and thermal properties

    NARCIS (Netherlands)

    Hendrickx, J.M.H.; Dam, R.L. van; Borchers, B.; Curtis, J.; Lensen, H.A.; Harmon, R.

    2003-01-01

    Ground penetrating radar and thermal sensors hold much promise for the detection of non-metallic land mines. In previous work we have shown that the performance of ground penetrating radar strongly depends on field soil conditions such as texture, water content, and soil-water salinity since these

  1. Thermal and structural properties of spray pyrolysed CdS thin film

    Indian Academy of Sciences (India)

    P Raji; C Sanjeeviraja; K Ramachandran

    2005-06-01

    Using photo acoustic technique, the thermal properties of CdS thin films grown by spray pyrolysis are measured. Thermal diffusivity and conductivity in these films decrease at least two orders compared with bulk. These results are compared with our study on nano CdS and the other available literature. The comparison is good. The dependence of thermal diffusivity on the thickness of the layer or the size of the particles on the glass substrate are analysed from the present measurement and discussed. The dependence of thermal diffusivity on the thickness of the layer on the glass substrate is discussed.

  2. Mechanical and Thermal Properties of Polymethyl Methacrylate-BN Nanotube Composites

    Directory of Open Access Journals (Sweden)

    C. Y. Zhi

    2008-01-01

    Full Text Available Polymethyl methacrylate (PMMA-BN nanotube (BNNT composites were fabricated and their mechanical and thermal properties were analyzed. Using a 1 wt.% BNNTs fraction in a polymer, the elastic modulus of PMMA was increased up to 19%. In addition, thermal stability and glass transition temperature of PMMA were also positively affected. The thermal conductivity of PMMA with BNNT additions increased three times. The resultant BNNT-PMMA composites possess the high electrical breakover voltages. Thus our studies clearly indicate that BNNTs are promising nanofillers for improvement of mechanical and thermal conductivity of dielectric polymers under preservation of their electrical insulation.

  3. Controlling thermal and electrical properties of graphene by strain-engineering its flexural phonons

    Science.gov (United States)

    Conley, Hiram; Nicholl, Ryan; Bolotin, Kirill

    2014-03-01

    We explore the effects of flexural phonons on the thermal and electrical properties of graphene. To control the amplitude of flexural phonons, we developed a technique to engineer uniform mechanical strain between 0 and 1% in suspended graphene. We determine the level of strain, thermal conductivity and carrier mobility of graphene through a combination of mechanical resonance and electrical transport measurements. Depending on strain, we find significant changes in the thermal expansion coefficient, thermal conductivity, and carrier mobility of suspended graphene. These changes are consistent with the expected contribution of flexural phonons.

  4. Teaching Instrumentation Concepts by the Examination of Thermal Properties of Elastomers

    Science.gov (United States)

    Vierheller, Timothy

    2012-04-01

    Fundamental instrumentation concepts were taught using two important thermal techniques in characterizing elastomeric materials: Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analysis (TGA). Instrumentation concepts included the following: calibration, resolution, accuracy, and precision. Basic thermal properties (such as specific heat capacity, glass transition temperature, melting temperature, melting enthalpy, and decomposition temperature) of elastomeric materials were reviewed, as was how DSC and TGA measure these properties. Using this background, instrumentation concepts were examined using collected data and related statistical information. Materials examined included polyethylene, nitrile rubber, and a natural rubber-butadiene blend.

  5. Effect of thermal processing practices on the properties of superplastic Al-Li alloys

    Science.gov (United States)

    Hales, Stephen J.; Lippard, Henry E.

    1993-01-01

    The effect of thermal processing on the mechanical properties of superplastically formed structural components fabricated from three aluminum-lithium alloys was evaluated. The starting materials consisted of 8090, 2090, and X2095 (Weldalite(TM) 049), in the form of commercial-grade superplastic sheet. The experimental test matrix was designed to assess the impact on mechanical properties of eliminating solution heat treatment and/or cold water quenching from post-forming thermal processing. The extensive hardness and tensile property data compiled are presented as a function of aging temperature, superplastic strain and temper/quench rate for each alloy. The tensile properties of the materials following superplastic forming in two T5-type tempers are compared with the baseline T6 temper. The implications for simplifying thermal processing without degradation in properties are discussed on the basis of the results.

  6. Stretchable, Transparent Electrodes as Wearable Heaters Using Nanotrough Networks of Metallic Glasses with Superior Mechanical Properties and Thermal Stability.

    Science.gov (United States)

    An, Byeong Wan; Gwak, Eun-Ji; Kim, Kukjoo; Kim, Young-Cheon; Jang, Jiuk; Kim, Ju-Young; Park, Jang-Ung

    2016-01-13

    Mechanical robustness, electrical and chemical reliabilities of devices against large deformations such as bending and stretching have become the key metrics for rapidly emerging wearable electronics. Metallic glasses (MGs) have high elastic limit, electrical conductivity, and corrosion resistance, which can be promising for applications in wearable electronics. However, their applications in wearable electronics or transparent electrodes have not been extensively explored so far. Here, we demonstrate stretchable and transparent electrodes using CuZr MGs in the form of nanotrough networks. MG nanotroughs are prepared by electrospinning and cosputtering process, and they can be transferred to various desired substrates, including stretchable elastomeric substrates. The resulting MG nanotrough network is first utilized as a stretchable transparent electrode, presenting outstanding optoelectronic (sheet resistance of 3.8 Ω/sq at transmittance of 90%) and mechanical robustness (resistance change less than 30% up to a tensile strain of 70%) as well as excellent chemical stability against hot and humid environments (negligible degradation in performance for 240 h in 85% relative humidity and 85 °C). A stretchable and transparent heater based on the MG nanotrough network is also demonstrated with a wide operating temperature range (up to 180 °C) and excellent stretchability (up to 70% in the strain). The excellent mechanical robustness of these stretchable transparent electrode and heater is ascribed to the structural configuration (i.e., a nanotrough network) and inherent high elastic limit of MGs, as supported by experimental results and numerical analysis. We demonstrate their real-time operations on human skin as a wearable, transparent thermotherapy patch controlled wirelessly using a smartphone as well as a transparent defroster for an automobile side-view mirror, suggesting a promising strategy toward next-generation wearable electronics or automobile applications.

  7. Electronic and Thermal Transport Properties of Complex Structured Cu-Bi-Se Thermoelectric Compound with Low Lattice Thermal Conductivity

    Directory of Open Access Journals (Sweden)

    Jae-Yeol Hwang

    2013-01-01

    Full Text Available Monoclinic Cux+yBi5−ySe8 structure has multiple disorders, such as randomly distributed substitutional and interstitial disorders by Cu as well as asymmetrical disorders by Se. Herein, we report the correlation of electronic and thermal properties with the structural complexities of Cux+yBi5−ySe8. It is found that the interstitial Cu site plays an important role not only to increase the electrical conductivity due to the generation of electron carriers but also to reduce the thermal conductivity mainly due to the phonon scattering by mass fluctuation. With impurity doping at the interstitial Cu site, an extremely low lattice thermal conductivity of 0.32 W·m−1·K−1 was achieved at 560 K. These synergetic effects result in the enhanced dimensionless figure of merit (ZT.

  8. Multi-scale numerical simulations of thermal expansion properties of CNT-reinforced nanocomposites.

    Science.gov (United States)

    Alamusi, Affa; Hu, Ning; Qiu, Jianhui; Li, Yuan; Chang, Christiana; Atobe, Satoshi; Fukunaga, Hisao; Liu, Yaolu; Ning, Huiming; Wu, Liangke; Li, Jinhua; Yuan, Weifeng; Watanabe, Tomonori; Yan, Cheng; Zhang, Yajun

    2013-01-07

    In this work, the thermal expansion properties of carbon nanotube (CNT)-reinforced nanocomposites with CNT content ranging from 1 to 15 wt% were evaluated using a multi-scale numerical approach, in which the effects of two parameters, i.e., temperature and CNT content, were investigated extensively. For all CNT contents, the obtained results clearly revealed that within a wide low-temperature range (30°C ~ 62°C), thermal contraction is observed, while thermal expansion occurs in a high-temperature range (62°C ~ 120°C). It was found that at any specified CNT content, the thermal expansion properties vary with temperature - as temperature increases, the thermal expansion rate increases linearly. However, at a specified temperature, the absolute value of the thermal expansion rate decreases nonlinearly as the CNT content increases. Moreover, the results provided by the present multi-scale numerical model were in good agreement with those obtained from the corresponding theoretical analyses and experimental measurements in this work, which indicates that this multi-scale numerical approach provides a powerful tool to evaluate the thermal expansion properties of any type of CNT/polymer nanocomposites and therefore promotes the understanding on the thermal behaviors of CNT/polymer nanocomposites for their applications in temperature sensors, nanoelectronics devices, etc.

  9. Effect of interfacial treatment on the thermal properties of thermal conductive plastics

    Directory of Open Access Journals (Sweden)

    2007-09-01

    Full Text Available In this paper, ZnO, which is processed by different surface treatment approaches, is blended together with polypropylene to produce thermal conductive polymer composites. The composites are analyzed by Fourier transform infrared (FTIR spectroscopy and scanning electron microscopy (SEM to investigate the surface modification of filler, their distribution in the matrix and the condition of two-phase interface. Optimized content of filler surface modifier is investigated as well. The results showed that using low-molecular coupling agent produces positive effect to improve the interface adhesion between filler and matrix, and the thermal conductivity of the composite as well. Macro-molecular coupling agent can strongly improve two-phase interface, but it is not beneficial at obtaining a high thermal conductivity. The blend of ZnO without modification and polypropylene has many defects in the two-phase interface, and the thermal conductivity of the composite is between those of composites produced by previous two approaches. The surface treatment of the filler also allowed producing the composites with lower coefficient of thermal expansion (CTE. As for the content of low-molecular coupling agent, it obtains the best effect at 1.5 wt%.

  10. Thermal expansion properties of Lu2-x FexMo3O12

    Institute of Scientific and Technical Information of China (English)

    Wu Mei-Mei; Peng Jie; Zu Yong; Liu Rong-Deng; Hu Zhong-Bo; Liu Yun-Tao; Chen Dong-Feng

    2012-01-01

    The structures and thermal expansion properties of Lu2-xFex Mo3O12 have been investigated by X-ray diffraction (XRD).XRD patterns at room temperature indicate that componnds Lu2 xFexMo3O12 with x ≤ 1.3 exhibit an orthorhombic structure with space group Pnca;compounds with x =1.5 and 1.7 have a monoclinic structure with space group P21/a.Studies on thermal expansion properties show that the linear thermal expansion coefficients of orthorhombic phase vary from negative to positive with increasing Fe content.Attempts to make zero thermal expansion materials indicate that zero thermal expansion can be observed in Lu1.3Feo.7Mo3O12 in the temperature range of 200-400°C.

  11. Spray freeze-dried nanofibrillated cellulose aerogels with thermal superinsulating properties.

    Science.gov (United States)

    Jiménez-Saelices, Clara; Seantier, Bastien; Cathala, Bernard; Grohens, Yves

    2017-02-10

    Nanofibrillated cellulose (NFC) aerogels were prepared by spray freeze-drying (SFD). Their structural, mechanical and thermal insulation properties were compared to those of NFC aerogels prepared by conventional freeze-drying (CFD). The purpose of this investigation is to develop superinsulating bioaerogels by reducing their pore size. Severe reduction of the aerogel pore size and skeleton architecture were observed by SEM, aerogels prepared by SFD method show a fibril skeleton morphology, which defines a mesoporous structure. BET analyses confirm the appearance of a new organization structure with pores of nanometric sizes. As a consequence, the thermal insulation properties were significantly improved for SFD materials compared to CFD aerogel, reaching values of thermal conductivity as low as 0.018W/(mK). Moreover, NFC aerogels have a thermal conductivity below that of air in ambient conditions, making them one of the best cellulose based thermal superinsulating material. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Thermal properties of U–Mo alloys irradiated to moderate burnup and power

    Energy Technology Data Exchange (ETDEWEB)

    Burkes, Douglas E., E-mail: Douglas.Burkes@pnnl.gov; Casella, Andrew M.; Casella, Amanda J.; Buck, Edgar C.; Pool, Karl N.; MacFarlan, Paul J.; Edwards, Matthew K.; Smith, Frances N.

    2015-09-15

    Highlights: • Thermal properties of irradiated U–Mo alloy monolithic fuel samples were measured. • Density, thermal diffusivity, and thermal conductivity are influenced by increasing burnup. • U–Mo chemistry and specific heat capacity was not as sensitive to increasing burnup. • Thermal conductivity decreased approximately 45% for a fission density of 4.52 × 10{sup 21} fissions cm{sup −3} at 200 °C. • An empirical model developed previously agrees well with the experimental measurements. - Abstract: A variety of physical and thermal property measurements as a function of temperature and fission density were performed on irradiated U–Mo alloy monolithic fuel samples with a Zr diffusion barrier and clad in aluminum alloy 6061. The U–Mo alloy density, thermal diffusivity, and thermal conductivity are strongly influenced by increasing burnup, mainly as the result of irradiation induced recrystallization and fission gas bubble formation and coalescence. U–Mo chemistry, specifically Mo content, and specific heat capacity was not as sensitive to increasing burnup. Measurements indicated that thermal conductivity of the U–Mo alloy decreased approximately 30% for a fission density of 3.30 × 10{sup 21} fissions cm{sup −3} and approximately 45% for a fission density of 4.52 × 10{sup 21} fissions cm{sup −3} from unirradiated values at 200 °C. An empirical thermal conductivity degradation model developed previously and summarized here agrees well with the experimental measurements.

  13. The effect of CNTs reinforcement on thermal and electrical properties of cement-based materials

    Science.gov (United States)

    Exarchos, D. A.; Dalla, P. T.; Tragazikis, I. K.; Matikas, T. E.

    2015-03-01

    This research aims to investigate the influence of the nano-reinforcement on the thermal properties of cement mortar. Nano-modified cement mortar with carbon nanotubes (CNTs) leading to the development of innovative materials possessing multi-functionality and smartness. Such multifunctional properties include enhanced mechanical behavior, electrical and thermal conductivity, and piezo-electric characteristics. The assessment of the thermal behavior was evaluated using IR Thermography. Two different thermographic techniques are used to monitor the influence of the nano-reinforcement. To eliminate any extrinsic effects (e.g. humidity) the specimens were dried in an oven before testing. The electrical resistivity was measured with a contact test method using a custom made apparatus and applying a known D.C. voltage. This study indicate that the CNTs nano-reinforcement enhance the thermal and electrical properties and demonstrate them useful as sensors in a wide variety of applications.

  14. Dynamic measurement of coal thermal properties and elemental composition of volatile matter during coal pyrolysis

    Directory of Open Access Journals (Sweden)

    Rohan Stanger

    2014-01-01

    Full Text Available A new technique that allows dynamic measurement of thermal properties, expansion and the elemental chemistry of the volatile matter being evolved as coal is pyrolysed is described. The thermal and other properties are measured dynamically as a function of temperature of the coal without the need for equilibration at temperature. In particular, the technique allows for continuous elemental characterisation of tars as they are evolved during pyrolysis and afterwards as a function of boiling point. The technique is demonstrated by measuring the properties of maceral concentrates from a coal. The variation in heats of reaction, thermal conductivity and expansion as a function of maceral composition is described. Combined with the elemental analysis, the results aid in the interpretation of the chemical processes contributing to the physical and thermal behaviour of the coal during pyrolysis. Potential applications in cokemaking studies are discussed.

  15. Influence of Textile Structure and Silica Based Finishing on Thermal Insulation Properties of Cotton Fabrics

    Directory of Open Access Journals (Sweden)

    G. Rosace

    2016-01-01

    Full Text Available The aim of this work is to investigate the influence of weave structures and silica coatings obtained via sol-gel process on the thermal insulation properties of cotton samples. For this reason three main weave structures (plain, satin, and piqué of cotton fabric were selected with different yarn count, threads per cm, and mass per square meter values. Thereafter, only for the plain weave, the samples were padded using silica sol formed by hydrolysis and subsequent condensation of 3-glycidoxypropyltrimethoxysilane under acidic conditions. The silanized plain weave samples were characterized by TGA and FT-IR techniques. The thermal properties were measured with a home-made apparatus in order to calculate thermal conductivity, resistance, and absorption of all the treated fabric samples. The relationship between the thermal insulation properties of the plain weave fabrics and the concentration of sol solutions has been investigated. Fabrics weave and density were found to strongly influence the thermal properties: piqué always shows the lowest values and satin shows the highest values while plain weave lies in between. The thermal properties of treated high-density cotton plain weave fabric were proved to be strongly influenced by finishing agent concentration.

  16. Effects of Composition and Thermal Cycle on Transformation Behaviors, Thermal Stability and Mechanical Properties of CuAlAg Alloy

    Institute of Scientific and Technical Information of China (English)

    Yunqing MA; Chengbao JIANG; Lifen DENG; Huibin XU

    2003-01-01

    The phase transformation behavior, mechanical properties, and the thermal stability of CuAlAg alloy were studied andminor rare earth (0.1 wt pct La+Ce) was added to improve the mechanical property of the studied alloy. It was foundthat Ag addition in the CuAl binary alloy can improve the stability of martensitic transformation and high Al contentleads to the disappearing of martensitic transformation. The tensile strength and strain of the Cu-10.6Al-5.8Ag (wtpct) alloy were measured to be 383.5 MPa and 0.86%, respectively. With rare earth addition, the tensile strainincreased from 0.86% to 1.47%. The CuAlAg alloy did not exhibit martensitic transformation on the second heatingprocess. Its poor thermal stability still needs to be improved.

  17. Thermal cycling, oxidation behaviour and mechanical properties of graded and duplex PSZ TBC coatings

    Energy Technology Data Exchange (ETDEWEB)

    Musil, J. [SKODA, Plzen (Czech Republic); Alaya, M.; Oberacker, R. [Univ. of Karlsruhe (Germany)

    1995-07-01

    Plasma sprayed duplex and graded ZrO{sub 2} thermal barrier coatings (TBCs) on an Inconel 617 substrate with a NiCrAlY bond coat were investigated and compared with regard to their thermal cycling, oxidation behaviour and mechanical properties. On the basis of FE - calculations the stress distribution within thermally cycled coating systems was analyzed. The calculations show that the graded coating structure relaxes considerably the stresses resulting from the internal constraint due to thermal expansion difference between both metallic and ceramic materials and hence must lead to a better thermal cycling behaviour of the graded TBC systems. Mechanical tests confirm it. However, taking into account their poor oxidation behaviour, the lifetime of duplex TBC systems which are under steady-state thermal load conditions is much higher than that of graded ones.

  18. Effect of thermal-treatment sequence on sound absorbing and mechanical properties of porous sound-absorbing/thermal-insulating composites

    OpenAIRE

    Huang Chen-Hung; Tsay Cherng-Shiuan; Lou Ching-Wen; Chuang Yu-Chun; Shih Ying-Huei; Lin Jia-Horng

    2016-01-01

    Due to recent rapid commercial and industrial development, mechanical equipment is supplemented massively in the factory and thus mechanical operation causes noise which distresses living at home. In livelihood, neighborhood, transportation equipment, jobsite construction noises impact on quality of life not only factory noise. This study aims to preparation technique and property evaluation of porous sound-absorbing/thermal-insulating composites. Hollow three-dimensional crimp PET fibers ble...

  19. Determination of thermal properties of commercial Ni-MH cells

    Science.gov (United States)

    Darcy, Eric C.

    1994-01-01

    The test objectives were to evaluate the electrical and thermal performance of commercial Ni-MH cells, evaluate the effectiveness of commercial charge control circuits, assess the abuse tolerance of these cells, and correlate performance and abuse tolerances to cell design via disassembly. Design objectives were to determine which cell designs are most suitable for scale-up and to guide the design of future shuttle and space station based battery chargers. Results, displayed in viewgraph format, include: reflex charging with ICS circuit resulted in premature charge termination; Ni-MH cells appear very tolerant to overcharge at low rates; Enstore's charger is more electrically and thermally efficient at high rates; and Ni-MH cycles much more efficiently than Ni-Cd with the delta-V/delta-t termination.

  20. Thermal Effect of Ceramic Nanofiller Aluminium Nitride on Polyethylene Properties

    Directory of Open Access Journals (Sweden)

    Omer Bin Sohail

    2012-01-01

    Full Text Available Ethylene polymerization was done to form polyethylene nano-composite with nanoaluminum nitride using zirconocene catalysts. Results show that the catalytic activity is maximum at a filler loading of 15 mg nanoaluminum nitride. Differential scanning calorimeter (DSC and X-ray diffraction (XRD results show that percentage crystallinity was also marginally higher at this amount of filler. Thermal behavior of polyethylene nanocomposites (0, 15, 30, and 45 mg was studied by DSC and thermal gravimetric analyzer (TGA. Morphology of the component with 15 mg aluminium nitride is more fibrous as compared to 0 mg aluminium nitride and higher filler loading as shown by SEM images. In order to understand combustibility behavior, tests were performed on microcalorimeter. Its results showed decrease in combustibility in polyethylene nanocomposites as the filler loading increases.

  1. Thermal properties of epoxy resins at cryogenic temperatures

    Science.gov (United States)

    Nakane, H.; Nishijima, S.; Fujishiro, H.; Yamaguchi, T.; Yoshizawa, S.; Yamazaki, S.

    2002-05-01

    In order to establish the design technique of epoxy resin at cryogenic temperature, its thermal contraction coefficients and dynamic Young's modulus were measured from room to cryogenic temperatures when plasticizer was both present and absent. The disappearance of the effects of the plasticizer were confirmed by measuring its thermal expansion coefficient. The process in which the addition of plasticizer reduces the glass transition temperature was clarified by measuring its dynamic Young's modulus. It was also discovered that blunt peak is caused by addition of plasticizer. The data obtained by measuring the dynamic Young's modulus clearly indicate that this peak disappears at cryogenic temperature resulting in the disappearance of the effects of the plastizer. The conclusion is that when epoxy resin is to be used at cryogenic temperature it is desirable that the addition of plastizer is kept at the minimum level.

  2. Thermal and electrical properties of a solid through Fibonacci oscillators

    Science.gov (United States)

    Marinho, André A.; Brito, Francisco A.; Chesman, Carlos

    2016-02-01

    We investigate the thermodynamics of a crystalline solid applying q-deformed algebra of Fibonacci oscillators through the generalized Fibonacci sequence of two real and independent deformation parameters q1 and q2. We based part of our study on both Einstein and Debye models, exploring primarily (q1, q2) -deformed thermal and electric conductivities as a function of Debye specific heat. The results revealed that q-deformation acts as a factor of disorder or impurity, modifying the characteristics of a crystalline structure. Specially, one may find the possibility of adjusting the Fibonacci oscillators to describe the change of thermal and electrical conductivities of a given element as one inserts impurities. Each parameter can be associated to different types of deformations such as disorders and impurities.

  3. Irradiation effects on thermal properties of LWR hydride fuel

    Science.gov (United States)

    Terrani, Kurt; Balooch, Mehdi; Carpenter, David; Kohse, Gordon; Keiser, Dennis; Meyer, Mitchell; Olander, Donald

    2017-04-01

    Three hydride mini-fuel rods were fabricated and irradiated at the MIT nuclear reactor with a maximum burnup of 0.31% FIMA or ∼5 MWd/kgU equivalent oxide fuel burnup. Fuel rods consisted of uranium-zirconium hydride (U (30 wt%)ZrH1.6) pellets clad inside a LWR Zircaloy-2 tubing. The gap between the fuel and the cladding was filled with lead-bismuth eutectic alloy to eliminate the gas gap and the large temperature drop across it. Each mini-fuel rod was instrumented with two thermocouples with tips that are axially located halfway through the fuel centerline and cladding surface. In-pile temperature measurements enabled calculation of thermal conductivity in this fuel as a function of temperature and burnup. In-pile thermal conductivity at the beginning of test agreed well with out-of-pile measurements on unirradiated fuel and decreased rapidly with burnup.

  4. Growth of NiCo2O4@MnMoO4 Nanocolumn Arrays with Superior Pseudocapacitor Properties.

    Science.gov (United States)

    Cui, Chunyu; Xu, Jiantie; Wang, Lei; Guo, Di; Mao, Minglei; Ma, Jianmin; Wang, Taihong

    2016-04-06

    Three-dimensional heterostructured NiCo2O4@MnMoO4 nanocolumn arrays (NCAs) on Ni foam were first fabricated through an improved two-step hydrothermal process associated with a successive annealing treatment. The hybrid NiCo2O4@MnMoO4 electrode exhibited remarkable pseudocapacitor property with high initial mass specific capacitance of 1705.3 F g(-1) at 5 mA cm(-2), and retained 92.6% after 5000 cycles, compared to the bare NiCo2O4 electrode with 839.1 F g(-1) and 90.9%. The excellent capacitive property of the NiCo2O4@MnMoO4 hydrid was attributed to its high-electron/ion-transfer rate, large electrolyte infiltrate area, and more electroactive reaction sites.

  5. Analysis of the thermal properties of nanomodified epoxy composite

    Directory of Open Access Journals (Sweden)

    FOMIN Nikolay Egorovich

    2014-02-01

    Full Text Available The paper presents the results of experimental research of epoxy composites modified by nanoparticles. The results were obtained by the method of thermogravimetric analysis. The dependences between the intensity of the processes of thermal degradation in the air and technological factors and content of nanoparticles have been determined. The optimal concentration of 5 types of nanomodifiers besed on carbon nanoclusters adducts, which are functionalized carbon compounds has been revealed. The obvious advantage of these modifiers is their high solubility in polar solvents, that makes the use of these modifiers easier and allows disusing the additional sonication. Investigation of thermooxidation processes of modified epoxy resins was performed in a dynamic mode using TGA/SDTA851e module of STARe System in the temperature range 25÷800⁰C in air atmosphere with simultaneous removal of the gaseous decomposition products. Aluminum oxide (Al₂O₃ was used as the etalon, the temperature speed set was 10 deg./min. It was found out that the process of thermal degradation consists of two stages. The first step is characterized by the main oxidative degradation of polymer and the loss of up to 80% of the original sample weight, the second step is accompanied by the further oxidative decomposition of epoxy composite related to the carbon skeleton destruction. It was proved experimentally that injection of modifiers changes thermal-oxidative decomposition processes and also changes specific energy of epoxy composite according to the type and concentration of nanomodifier. It was shown that the injection of optimal amounts of modifier allows increase of the thermal and energy characteristics, and as a result, the durability of epoxy coatings exposed to aggressive climatic factors.

  6. Measurement of Thermal Dependencies of PBG Fiber Properties

    Energy Technology Data Exchange (ETDEWEB)

    Laouar, Rachik

    2011-07-06

    Photonic crystal fibers (PCFs) represent a class of optical fibers which have a wide spectrum of applications in the telecom and sensing industries. Currently, the Advanced Accelerator Research Department at SLAC is developing photonic bandgap particle accelerators, which are photonic crystal structures with a central defect used to accelerate electrons and achieve high longitudinal electric fields. Extremely compact and less costly than the traditional accelerators, these structures can support higher accelerating gradients and will open a new era in high energy physics as well as other fields of science. Based on direct laser acceleration in dielectric materials, the so called photonic band gap accelerators will benefit from mature laser and semiconductor industries. One of the key elements to direct laser acceleration in hollow core PCFs, is maintaining thermal and structural stability. Previous simulations demonstrate that accelerating modes are sensitive to the geometry of the defect region and the variations in the effective index. Unlike the telecom modes (for which over 95% of the energy propagates in the hollow core) most of the power of these modes is located in the glass at the periphery of the central hole which has a higher thermal constant than air ({gamma}{sub SiO{sub 2}} = 1.19 x 10{sup -6} 1/K, {gamma}{sub air} = -9 x 10{sup -7} 1/K with {gamma} = dn/dT). To fully control laser driven acceleration, we need to evaluate the thermal and structural consequences of such modes on the PCFs. We are conducting series of interferometric tests to quantify the dependencies of the HC-633-02 (NKT Photonics) propagation constant (k{sub z}) on temperature, vibration amplitude, stress and electric field strength. In this paper we will present the theoretical principles characterizing the thermal behavior of a PCF, the measurements realized for the fundamental telecom mode (TE{sub 00}), and the experimental demonstration of TM-like mode propagation in the HC-633

  7. Thermal expansion properties of metallic and cermet coatings

    Energy Technology Data Exchange (ETDEWEB)

    Ilavsky, J.; Berndt, C.C. [State Univ. of New York, Stony Brook, NY (United States). Center for Thermal Spray Res.

    1998-04-01

    Free-standing deposits of NiCrAl, stainless steel, and 8 wt.% yttria-stabilized zirconia were prepared using atmospheric plasma spraying and high velocity oxygen fuel processing. Feedstock powders were blended, yielding mixtures (by weight) of 100%, 75%, and 50% of the metallic material. Porosity and composition (i.e. metal or ceramic constituents) of these deposits were measured by image analysis. The coefficient of thermal expansion (CTE) was measured in the 200-950 C interval for four thermal cycles. The first runs of these CTE measurements were not linear and differentiation of this curve established the CTE dependence with respect to temperature. Maximums in CTE behavior suggest that stress relaxation and/or oxidation may be occurring. Measurements of CTE from thermal cycles after the first cycle were constant and obeyed the law of mixtures in the measured temperature region, suggesting that stress relaxation and/or oxidation, evident in the first cycle, are no longer dominant. Microstructural analysis and microhardness measurements were used to confirm the findings from CTE measurements. (orig.) 13 refs.

  8. Optical, spectral and thermal properties of natural pumice glass

    Science.gov (United States)

    Correcher, V.; Gomez-Ros, J. M.; Dogan, T.; Garcia-Guinea, J.; Topaksu, M.

    2017-01-01

    Pumice is a natural Si-rich material displaying a complex cathodo- (CL) and thermoluminescence (TL) glow curves. The UV-IR CL emission consists of (i) a UV waveband in the range of 340-420 nm,(ii) blue band at 450-480 nm and (iii) a broad emission in the green-red region (at 550-650 nm) that could be respectively linked to Non Bridging Oxygen Hole Centers (tbnd Si-O•), self-trapped excitons and point defects (Mn2+ -0.03%- and Fe -1.15%-). Thermal treatments performed on the TL glow curves allowed us to determine that the trap system could be associated with a continuum in the trap distribution, since successive thermal pretreatments in the range of 200-310 °C induce an emission that shifts linearly to higher temperatures when the thermal pretreatment (Tstop) is increased, while the intensity of the maxima decreases similarly to the peak area. The evaluation of the Ea values, s value and the trap system calculated by VHR, IR and Glow curve fitting methods considering three possible distribution function for n(E): gaussian, exponential and uniform, has given matching values for the 280 °C TL peak.

  9. Solution strengthened ferritic ductile iron ISO 1083/JS/500-10 provides superior consistent properties in hydraulic rotators

    Institute of Scientific and Technical Information of China (English)

    Dr.Richard Larker

    2009-01-01

    Consistent mechanical and machining properties are essential in many applications where ductile irons offer the most cost-effective way to produce structural parts. In the production of hydraulic rotators, dimensional tolerances are typically 20 μm to obtain designated performance.For castings where intermediate strength and ductility is required, it is common knowledge that conventional ferritic-pearlitic ductile irons such as ISO 1083/500-7 show large hardness variations. These are mainly caused by the notoriously varying pearlite content, both at different locations within a part and between parts in the same or different batches. Cooling rate variations due to different wall thickness and position in the molding box, as well as varying amounts of pearlite-stabilizing elements, all contribute to detrimental hardness variations.The obvious remedy is to avoid pearlite formation, and instead obtain the necessary mechanical properties by solution strengthening of the ferritic matrix by increasing silicon content to 3.7wt% -3.8wt%. The Swedish development in this field 1998 resulted in a national standardization as SS 140725, followed in 2004 by ISO 1083/ JS/500-10.Indexator AB decided 2005 to specify JS/500-10 for all new ductile iron parts and to convert all existing parts. Improvements include reduction by 75% in hardness variations and increase by 30% in cutting tool life, combined with consistently better mechanical properties.

  10. The thermal properties of the subsurface – key parameters for geothermal energy utilization

    DEFF Research Database (Denmark)

    Norden, Ben; Bording, Thue Sylvester; Balling, N.

    Often the investigation of petrophysical properties is far behind the capabilities of sophisticated modelling techniques applied in basin and geothermal modelling and for which these data serve as an input. Therefore, more in-depth investigations especially of thermal properties are requested. We...

  11. The thermal properties of the subsurface – key parameters for geothermal energy utilization

    DEFF Research Database (Denmark)

    Norden, Ben; Bording, Thue Sylvester; Balling, N.

    Often the investigation of petrophysical properties is far behind the capabilities of sophisticated modelling techniques applied in basin and geothermal modelling and for which these data serve as an input. Therefore, more in-depth investigations especially of thermal properties are requested. We...

  12. Effect of Functionalization of Graphene Nanoplatelets on the Mechanical and Thermal Properties of Silicone Rubber Composites

    Directory of Open Access Journals (Sweden)

    Guangwu Zhang

    2016-02-01

    Full Text Available This study investigated the effect of silane and surfactant treatments of graphene nanoplatelets (GnPs on the mechanical and thermal properties of silicone rubber (SR composites. GnPs were modified with aminopropyltriethoxysilane (APTES, vinyltrimethoxysilane (VTMS, and Triton X-100, and then the pristine GnPs and functionalized GnPs were individually incorporated into the SR. Compared with the pristine GnP/SR composite, the composites reinforced with modified GnP showed better tensile strength, elongation at break, and thermal conductivity properties due to better dispersion of modified GnPs and stronger interfacial interactions between the modified GnPs and matrix. The mechanical properties and thermal conductivity of the VTMS-GnP/SR composite were comparable to the properties of the Triton-GnP counterpart, but better than that of the APTES-GnP/SR composite. In addition, the VTMS-GnP/SR composite demonstrated the highest thermal stability and crystallization temperature among the four types of composites. The remarkable improvement of mechanical and thermal properties of the VTMS-GnP/SR composite was mainly due to the covalent linkage of VTMS-GnP with SR. The VTMS treatment was a more appropriate modification of GnP particles to improve the multifunctional properties of SR.

  13. Measurement of FePt thermal properties relevant to heat-assisted magnetic recording

    Science.gov (United States)

    Chernyshov, Alex; Treves, David; Le, Thanh; Zong, Fenghua; Ajan, Antony; Acharya, Ramamurthy

    2014-05-01

    Heat-assisted magnetic recording (HAMR) is the likely successor of the conventional perpendicular magnetic recording. Due to its high anisotropy, graded L10 ordered FePt is widely used as a HAMR recording layer. Electrically insulating MgO under-layer is essential for growing FePt in HAMR media. Experimentally, we observe very low thermal conductivity of FePt and significant thermal boundary resistance between FePt and MgO, whose magnitudes affect the HAMR thermal gradient. Realistic granular FePt media has >30% segregation, and, experimentally, we observe that FePt thermal properties are affected by segregation. We utilized time domain thermo-reflectance (TDTR) technique for studying FePt thermal conductivity and boundary resistance in realistic HAMR media stack. 1D finite element heat transport model was used for fitting experimental TDTR data and extracting thermal conductivities and related thermal boundary resistances. We found best fit thermal conductivity value for non-segregated FePt is as low as 13 W/mK. When reasonable amount of segregation (30%) is added, thermal conductivity reduces from 13 W/mK to 6 W/mK, and thermal boundary resistance to MgO reduces from 3.5 × 10-9 m2K/W to 0.7 × 10-9 m2K/W.

  14. A general property of non-endoreversible thermal cycles

    Energy Technology Data Exchange (ETDEWEB)

    Angulo-Brown, F.; Arias-Hernandez, L.A. [Instituto Politecnico Nacional (Mexico). Escuela Superior de Fisica y Matematicas; Paez-Hernandez, R. [Universidad Autonoma Metropolitana-Azcapotzalco (Mexico). Departamento de Ciencias Basicas

    1999-06-21

    In this work it is shown that a general property of endoreversible Curzon-Ahlborn-Novikov (CAN) cycles previously demonstrated can be extended for non-endoreversible CAN-cycles. This general property is based on the fact that at the so-called maximum ecological regime the efficiency is the average of the Carnot and the maximum-power efficiencies, and that in such a regime the power output is 75% of the maximum power of the CAN-cycle and the entropy produced is only 25% of that produced in the maximum power point. This property is independent of the heat transfer law. (author)

  15. Mechanical, thermal, and barrier properties of methylcellulose/cellulose nanocrystals nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Silverio, Hudson Alves; Flauzino Neto, Wilson Pires; Silva, Ingrid Souza Vieira da; Rosa, Joyce Rover; Pasquini, Daniel, E-mail: pasquini@iqufu.ufu.br, E-mail: danielpasquini2005@yahoo.com.br [Universidade de Uberlandia (USU), MG (Brazil). Instituto de Quimica; Assuncao, Rosana Maria Nascimento de [Universidade de Uberlandia (USU), Ituiutaba, MG (brazil). Fac. de Ciencias Integradas do Pontal; Barud, Hernane da Silva; Ribeiro, Sidney Jose Lima [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Araraquara, SP (Brazil). Instituto de Quimica

    2014-11-15

    In this work, the effects of incorporating cellulose nanocrystals from soy hulls (WSH{sub 30}) on the mechanical, thermal, and barrier properties of methylcellulose (MC) nanocomposites were evaluated. MC/WSH{sub 30} nanocomposite films with different filler levels (2, 4, 6, 8, and 10%) were prepared by casting. Compared to neat MC film, improvements in the mechanical and barrier properties were observed, while thermal stability was retained. The improved mechanical properties of nanocomposites prepared may be attributed to mechanical percolation of WSH{sub 30}, formation of a continuous network of WSH{sub 30} linked by hydrogen interactions and a close association between filler and matrix. (author)

  16. Thermal Exposure Effects on Properties of Al-Li Alloy Plate Products

    Science.gov (United States)

    Shah, Sandeep; Wells, Douglas; Wagner, John; Babel, Henry

    2003-01-01

    The objective of this viewgraph representation is to evaluate the effects of thermal exposure on the mechanical properties of both production mature and developmental Al-Li alloys. The researchers find for these alloys, the data clearly shows that there is no deficit in mechanical properties at lower exposure temperatures in some cases, and a signficant deficit in mechanical properties at higher exposure temperatures in all cases. Topics considered include: Al-Li alloys composition, key characteristics of Al-Li alloys and thermal exposure matrix.

  17. The frame retardant, mechanical properties, thermal properties and permeability of biodegradable polymers

    Science.gov (United States)

    Zuo, Xianghao

    Nano-particles are great additives to the thermal properties of the polymers, however, they sometimes have some disadvantages on the mechanical properties. The mixing of polymers and nano-particles such as cloisite clays, graphene, melamine polyphosphate and molybdenum disulfide, are mostly physical reactions between them. Therefore, the dispersion of the nano-particles inside the polymers is very important. As for the frame retardant of the polymers, the additives are used as three most important components during the mixing, i.e. the acid source, the carbonization agent (or char forming agent), and a blowing agent. The better the particles disperse in the polymer, the easier the material will blow and form chars during the combustion. Some of the nano-particles are used for heat conduction, which means if they have a better thermal conductivity and are better dispersed in the polymer, will certainly be benefit for the frame retardant. On the other hand, as for the gas permeability of the material, which means the gas diffuses through the polymer. Permeation is something that must be regarded highly in various polymer applications, due to their high permeability. Permeability depends on the temperature of the interaction as well as the characteristics of both the material and the permeant component. For pure polymers, since there is no additives and due to their own defects of the microstructure, gas will easily diffuse via the defects of the polymers. However, when nano-particles are mixed with the polymer, they will form barriers in the polymer and will make the gas to go a further path when it diffuses in a polymer. Hence, the well disperse of the nano-particles will be one of the key elements to reduce the gas permeation of the polymer and another factor which will impact the results will be the length over the width of the barriers. During the whole research, we focused on the most popular polymers like high density polyethylene (HDPE), low density

  18. Cryogenic abnormal thermal expansion properties of carbon-doped La(Fe,Si)13 compounds.

    Science.gov (United States)

    Li, Shaopeng; Huang, Rongjin; Zhao, Yuqiang; Wang, Wei; Li, Laifeng

    2015-12-14

    Recently, La(Fe,Si)13-based compounds have attracted much attention due to their isotropic and tunable abnormal thermal expansion (ATE) properties as well as bright prospects for practical applications. In this research, we have prepared cubic NaZn13-type carbon-doped La(Fe,Si)13 compounds by the arc-melting method, and their ATE and magnetic properties were investigated by means of variable-temperature X-ray diffraction, strain gauge and the physical property measurement system (PPMS). The experimental results indicate that both micro and macro negative thermal expansion (NTE) behaviors gradually weaken with the increase of interstitial carbon atoms. Moreover, the temperature region with the most remarkable NTE properties has been broadened and near zero thermal expansion (NZTE) behavior occurs in the bulk carbon-doped La(Fe,Si)13 compounds.

  19. Effect of TiO2 pigment gradation on the properties of thermal insulation coatings

    Institute of Scientific and Technical Information of China (English)

    Lu-wei Shen; Ya-mei Zhang; Pei-gen Zhang; Jin-jie Shi; and Zheng-ming Sun

    2016-01-01

    This study was designed to evaluate the thermal performance and mechanical properties of coatings with different gradations of TiO2 pigments. The solar reflectance, cooling performance, wash resistance, and film adhesion strength of the coatings were investigated. The influence of TiO2 powder gradation on the final properties of the coatings was studed. The solar reflectance and the thermal insulation were observed to increase with increasing content of nanosized TiO2. The mechanical properties of the coatings, such as their wash resistance and film adhesion strength, were observed to increase with increased incorporation of nanosized TiO2. Such improvements in the properties of the coatings were attributed to the greater specific surface area and lower thermal conductivity of nanosized TiO2 particles compared to normal TiO2 particles.

  20. RESEARCH OF PROPERTIES KIESELGUHR AS OBJECT OF THERMAL REGENERATION

    Directory of Open Access Journals (Sweden)

    D. M. Vizir

    2012-01-01

    Full Text Available The physico-mechanical and thermophysical properties of diatomite аre investigated. The equations, allowing to define characteristics of diatomite in a wide range of temperature and humidity are received.

  1. Scalable synthesis of organic-soluble carbon quantum dots: superior optical properties in solvents, solids, and LEDs.

    Science.gov (United States)

    Wu, Minghong; Zhan, Jing; Geng, Bijiang; He, Piaopiao; Wu, Kuan; Wang, Liang; Xu, Gang; Li, Zhen; Yin, Luqiao; Pan, Dengyu

    2017-09-14

    Carbon quantum dots (CQDs) have attracted much attention owing to their unique optical properties and a wide range of applications. The fabrication and control of CQDs with organic solubility and long-wavelength emission are still urgent issues to be addressed for their practical use in LEDs. Here, organic-soluble CQDs were produced at a high yield of ∼90% by a facile solvent engineering treatment of 1,3,6-trinitropyrene, which were simultaneously used as the nitrogen and carbon sources. The optical properties of the organic-soluble CQDs (o-CQDs) were investigated in nonpolar and polar solvents, films, and LED devices. The CQDs have a narrow size distribution around 2.66 nm, and can be dispersed in different organic solvents. Significantly, the as-prepared CQDs present an excitation-independent emission at 607 nm with fluorescence quantum yields (QYs) up to 65.93% in toluene solution. A pronounced solvent effect was observed and their strong absorption bands can be tuned in the whole visible region (400-750 nm) by changing the solvent. The CQDs in various solvents can emit bright, excitation-independent, long-wavelength fluorescence (orange to red). Furthermore, benefiting from the unique oil-solution properties, the as-prepared CQDs can be processed in thin film and device forms to meet the requirements of various applications, such as phosphor-based white-light LEDs. The color coordinate for these CQD modified LEDs is realized at (0.32, 0.31), which is close to pure white light (0.33, 0.33).

  2. Study of the Thermal Properties of Raffia Bamboo Vinifera L. Arecaceae

    Directory of Open Access Journals (Sweden)

    E. Foadieng

    2017-01-01

    Full Text Available Raffia is a kind of fast-growing palm tree, from the family of Arecaceae, encountered in marshy areas and along rivers. In this study, the “Raffia Bamboo” is the stalk of a palm, made of a fragile marrow inside a thin shell, smooth and hard to protect the latter. In our region, this material is widely used to build all the low-cost traditional houses and furniture, to make granaries storage of dry products, to build chicken coops, to make decoration. Thus, various jobs are organized around this material, with the fight against poverty. To our knowledge, information on its thermal properties is almost nonexistent. The experimental determination of the transverse thermal properties of the dry shell, the dry marrow, and the whole dry bamboo helped to find, for each, a specific heat, a thermal diffusivity, a thermal conductivity, and finally a thermal effusivity. From the analysis of results, we deduce that the thermal properties of raffia bamboo vinifera L. Arecacea make it a very good thermal insulator.

  3. Impact of biochar addition on thermal properties of a sandy soil: modelling approach

    Science.gov (United States)

    Usowicz, Boguslaw; Lipiec, Jerzy; Lukowski, Mateusz; Bis, Zbigniew; Marczewski, Wojciech; Usowicz, Jerzy

    2017-04-01

    Adding biochar can alter soil thermal properties and increase the water holding capacity and reduce the mineral soil fertilization. Biochar in the soil can determine the heat balance on the soil surface and the temperature distribution in the soil profile through changes in albedo and the thermal properties. Besides, amendment of soil with biochar results in improvement of water retention, fertility and pH that are of importance in sandy and acid soils, widely used in agriculture. In this study we evaluated the effects of wood-derived biochar (0, 10, 20, and 40 Mg ha-1) incorporated to a depth of 0-15 cm on the thermal conductivity, heat capacity, thermal diffusivity and porosity in sandy soil under field conditions. In addition, soil-biochar mixtures of various percentages of biochar were prepared to determine the thermal properties in function of soil water status and density in laboratory. It was shown that a small quantity of biochar added to the soil does not significantly affect all the thermal properties of the soil. Increasing biochar concentration significantly enhanced porosity and decreased thermal conductivity and diffusivity with different rate depending on soil water status. The soil thermal conductivity and diffusivity varied widely and non-linearly with water content for different biochar content and soil bulk density. However, the heat capacity increased with biochar addition and water content linearly and was greater at higher than lower soil water contents. The measured and literature thermal data were compared with those obtained from the analytic model of Zhang et al. (2013) and statistical-physical model (Usowicz et al., 2016) based on soil texture, biochar content, bulk density and water content.

  4. Thermal Properties of Jojoba Oil Between 20°C and 45°C

    Science.gov (United States)

    Lara-Hernández, G.; Flores-Cuautle, J. J. A.; Hernandez-Aguilar, C.; Suaste-Gómez, E.; Cruz-Orea, A.

    2017-08-01

    Vegetable oils have been widely studied as biofuel candidates. Among these oils, jojoba ( Simmondsia chinensis) oil has attracted interest because it is composed almost entirely of wax esters that are liquid at room temperature. Consequently, it is widely used in the cosmetic and pharmaceutical industries. To date, research on S. chinensis oil has focused on to its use as a fuel and its thermal stability, and information about its thermal properties is scarce. In the present study, the thermal effusivity and conductivity of jojoba oil between 20°C and 45°C were obtained using the inverse photopyroelectric and hot-ball techniques. The feasibility of an inverse photopyroelectric method and a hot-ball technique to monitor the thermal conductivity, and the thermal effusivity of the S. chinensis is demonstrated. The thermal effusivity decreased from 538 W\\cdot s^{1/2}\\cdot m^{-2}\\cdot K^{-1} to 378 W\\cdot s^{1/2}m^{-2}\\cdot K^{-1} as the temperature increased, whereas the thermal conductivity remained the same over the temperature range investigated in this study. The obtained results provide insight into the thermal properties of S. chinensis oil between 20°C and 45°C.

  5. Thermal stability, swelling behavior and CO 2 absorption properties of Nanoscale Ionic Materials (NIMs)

    KAUST Repository

    Andrew Lin, Kun-Yi

    2014-11-11

    © The Royal Society of Chemistry 2015. Nanoscale Ionic Materials (NIMs) consist of a nanoscale core, a corona of charged brushes tethered on the surface of the core, and a canopy of the oppositely charged species linked to the corona. Unlike conventional polymeric nanocomposites, NIMs can display liquid-like behavior in the absence of solvents, have a negligible vapor pressure and exhibit unique solvation properties. These features enable NIMs to be a promising CO2 capture material. To optimize NIMs for CO2 capture, their structure-property relationships were examined by investigating the roles of the canopy and the core in their thermal stability, and thermally- and CO2-induced swelling behaviors. NIMs with different canopy sizes and core fractions were synthesized and their thermal stability as well as thermally- and CO2-induced swelling behaviors were determined using thermogravimetry, and ATR FT-IR and Raman spectroscopies. It was found that the ionic bonds between the canopy and the corona, as well as covalent bonds between the corona and the core significantly improved the thermal stability compared to pure polymer and polymer/nanofiller mixtures. A smaller canopy size and a larger core fraction led to a greater enhancement in thermal stability. This thermal stability enhancement was responsible for the long-term thermal stability of NIMs over 100 temperature swing cycles. Owing to their ordered structure, NIMs swelled less when heated or when they adsorbed CO2 compared to their corresponding polymers. This journal is

  6. Assessing the thermoelectric properties of single InSb nanowires: the role of thermal contact resistance

    Science.gov (United States)

    Yazji, S.; Swinkels, M. Y.; De Luca, M.; Hoffmann, E. A.; Ercolani, D.; Roddaro, S.; Abstreiter, G.; Sorba, L.; Bakkers, E. P. A. M.; Zardo, I.

    2016-06-01

    The peculiar shape and dimensions of nanowires (NWs) have opened the way to their exploitation in thermoelectric applications. In general, the parameters entering into the thermoelectric figure of merit are strongly interdependent, which makes it difficult to realize an optimal thermoelectric material. In NWs, instead, the power factor can be increased and the thermal conductivity reduced, thus boosting the thermoelectric efficiency compared to bulk materials. However, the assessment of all the thermoelectric properties of a NW is experimentally very challenging. Here, we focus on InSb NWs, which have proved to be promising thermoelectric materials. The figure of merit is accurately determined by using a novel method based on a combination of Raman spectroscopy and electrical measurements. Remarkably, this type of experiment provides a powerful approach allowing us to neglect the role played by thermal contact resistance. Furthermore, we compare the thermal conductivity determined by this novel method to the one determined on the same sample by the thermal bridge method. In this latter approach, the thermal contact resistance is a non-negligible parameter, especially in NWs with large diameters. We provide experimental evidence of the crucial role played by thermal contact resistance in the assessment of the thermal properties of nanostructures, using two different measurement methods of the thermal conductivity.

  7. Thermal properties of a new ecological building material / Granular cork embedded in white cement

    Directory of Open Access Journals (Sweden)

    Cherki Abou-bakr

    2014-04-01

    Full Text Available Cork, natural and renewable product, has thermal and acoustic properties very interesting because of its microstructure and porosity representing a significant portion of its apparent volume; it’s coming from Moroccan Maamora’s forest. This work is a contribution to understand the thermal behaviour of the composite material based on granular cork embedded in white cement. An experimental investigation of its thermal properties was mainly performed using the asymmetrical device of transient Hot Plate method. The effect of granular cork size on the thermal properties of the mixture was studied. The experimental study of this sustainable material aims to characterize its thermal properties and then compare them with those of white cement without cork for motivate the proposal that this composite material will be used as walls insulator. A comparison of the energy performances of the composite material and white cement was made; it allows deducing a very interesting energy gain. The findings of the experiments indicate that the composite is better than white cement in term of thermal insulation, energy storage capacity and lightness. So, it can be used to realize the internal walls insulation. Its utilization should contribute to the improvement of the energy efficiency in building especially that this is a mixture based on a sustainable and renewable material.

  8. Superior hydrogen storage and electrochemical properties of Mg(x)Ni(100-x)/Pd films at room temperature.

    Science.gov (United States)

    Liu, Tong; Cao, Yurong; Xin, Gongbiao; Li, Xingguo

    2013-10-07

    The Mg(x)Ni(100-x) films of 100 nm have been prepared by magnetron co-sputtering Mg and Ni targets, and a Pd layer of 10 nm was deposited on these films by magnetron sputtering a Pd target. Mg2Ni and MgNi2 are directly generated during the co-sputtering process in the Mg84Ni16/Pd and Mg48Ni52/Pd films. The hydrogen storage properties of the films under 0.1 MPa H2 at 298 K were investigated. The hydrogenation of the Mg84Ni16/Pd film saturates within 45 s and exhibits the faster absorption kinetics compared with Mg94Ni6/Pd and Mg48Ni52/Pd films. The electrochemical properties of the Mg(x)Ni(100-x)/Pd films were investigated in 6 M KOH with a three-electrode cell. The Mg84Ni16/Pd film can be activated just at the first cycle. The maximum discharge capacity of the Mg84Ni16/Pd film is 482.7 mAh g(-1), the highest among these films.

  9. Thermal properties of ruthenium alkylidene-polymerized dicyclopentadiene

    Directory of Open Access Journals (Sweden)

    Yuval Vidavsky

    2015-08-01

    Full Text Available Differential scanning calorimetry (DSC analysis of ring opening methatesis polymerization (ROMP derived polydicyclopentadiene (PDCPD revealed an unexpected thermal behavior. A recurring exothermic signal can be observed in the DSC analysis after an elapsed time period. This exothermic signal was found to be proportional to the resting period and was accompanied by a constant increase in the glass-transition temperature. We hypothesize that a relaxation mechanism within the cross-linked scaffold, together with a long-lived stable ruthenium alkylidene species are responsible for the observed phenomenon.

  10. Effects of thermal cycling on microstructure and properties in Nitinol

    Energy Technology Data Exchange (ETDEWEB)

    Pelton, A.R., E-mail: alan.pelton@nitinol.com [Nitinol Devices and Components, Inc. 47533 Westinghouse Dr., Fremont, CA 94539 (United States); Huang, G.H. [HuaZhong University of Science and Technology, Wuhan, Hubei (China); Moine, P. [Laboratoire d' Etudes des Materiaux en Milieux Agressifs, Universite de La Rochelle, 17042 La Rochelle Cedex 01 (France); Sinclair, R., E-mail: bobsinc@stanford.edu [Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305 (United States)

    2012-01-15

    Highlights: Black-Right-Pointing-Pointer Annealed Nitinol was thermally cycled from above A{sub f} to below M{sub f}. Black-Right-Pointing-Pointer We studied the microstructural changes by TEM and transformation behavior by DSC. Black-Right-Pointing-Pointer Increasing cycles decreased the martensite transformation temperatures. Black-Right-Pointing-Pointer There was a concomitant increase in dislocation density. Black-Right-Pointing-Pointer Thermodynamics showed increasing elastic strain energy and irreversible frictional energy. - Abstract: The effects of thermal cycling through the martensite-austenite transformation were investigated in NiTi shape memory alloys with DSC and TEM. Thermal cycling caused a {approx}25 K decrease in M{sub s} with a concomitant increase in dislocation density from {approx}10{sup 12} m{sup -2} to 5 Multiplication-Sign 10{sup 14} m{sup -2} after 100 thermal cycles. Thermodynamic analysis is consistent with increasing elastic strain energy and irreversible frictional energy with cycling. The transformation-induced dislocations were determined to be shear loops with Left-Pointing-Angle-Bracket 0 1 0 Right-Pointing-Angle-Bracket {sub A}{l_brace}1 0 1{r_brace}{sub A} slip system, corresponding to the twinning direction and plane in martensite. It is speculated that the loops form during the movement of the martensite interface and that repeated interfacial movement tends to create bands that consist of highly tangled sessile dislocations. These dislocation bands form along (0.756{sup Macron },0.383{sup Macron },0.192){sub A}, which is 2.3 Degree-Sign from the accepted (0.889{sup Macron },0.404{sup Macron },0.215){sub A} lattice invariant plane. Furthermore, plastically deformed austenitic Nitinol exhibits slip on Left-Pointing-Angle-Bracket 0 1 0 Right-Pointing-Angle-Bracket {sub A}{l_brace}1 0 1{r_brace}{sub A} slip system and forms {l_brace}1 1 0{r_brace} shear bands with several variants of the dislocations within a given region.

  11. Thermoelectric properties of monolayer MSe2 (M = Zr, Hf): low lattice thermal conductivity and a promising figure of merit

    Science.gov (United States)

    Ding, Guangqian; Gao, G. Y.; Huang, Zhishuo; Zhang, Wenxu; Yao, Kailun

    2016-09-01

    Monolayer transition-metal dichalcogenides (TMDCs) MX2 (M = Mo, W, Zr, Hf, etc; X = S, Se, Te) have become well-known in recent times for their promising applications in thermoelectrics and field effect transistors. In this work, we perform a systematic study on the thermoelectric properties of monolayer ZrSe2 and HfSe2 using first-principles calculations combined with Boltzmann transport equations. Our results point to a competitive thermoelectric figure of merit (close to 1 at optimal doping) in both monolayer ZrSe2 and HfSe2, which is markedly higher than previous explored monolayer TMDCs such as MoS2 and MoSe2. We also reveal that the higher figure of merits arise mainly from their low lattice thermal conductivity, and this is partly due to the strong coupling of acoustic modes with low frequency optical modes. It is found that the figure of merits can be better optimized in n-type than in p-type. In particular, the performance of HfSe2 is superior to ZrSe2 at a higher temperature. Our results suggest that monolayer ZrSe2 and HfSe2 with lower lattice thermal conductivity than usual monolayer TMDCs are promising candidates for thermoelectric applications.

  12. Empirical Correlations for Thermal Flowmeters Covering a Wide Range of Thermal-Physical Properties

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, J.E.; Hylton, J.O.; McKnight, T.E.

    1999-07-19

    Thermal flowmeters can provide direct mass flow measurement of gases and vapors over a wide range of process conditions without the need for density corrections based on pressure and temperature. They are widely used in industrial processes that contain toxic, corrosive, or highly reactive gases. It is often not possible to calibrate the flowmeter on the process gas in which it will be used. In this case a non-hazardous �surrogate� gas is used for calibration, and a theoretical model used to predict the meter�s response in the process gas. This can lead to large measurement errors because there are no accurate and straightforward methods for predicting the performance on one kind of gas based on the calibration on another gas because of the complexity of the thermal processes within the flow sensor. This paper describes some of the commonly used models and conversion methods and presents work done at ORNL to develop and experimentally verify better thermal models for predicting flowmeter performance.

  13. Geotechnical properties of La Arganosa Formation (Upper Cretaceous, Oviedo); Propiedades geotecnicas de la Formacion La Arganosa (Cretacico Superior, Oviedo)

    Energy Technology Data Exchange (ETDEWEB)

    Pando, L.; Gutierrez Claverol, M.; Flor-Blanco, G.

    2011-07-01

    It is performed the first geotechnical synthesis for La Arganosa Formation, the Cretaceous lithostratigraphic unit with very low geomechanical quality under the urban core of Oviedo; it also configures a major regional aquifer. In this study, geotechnical parameters of identification and condition, as well as physical and hydraulic ones, are compiled, statistically treated and interpreted. They were obtained from about 400 laboratory tests and more than 250 field tests around the city. The unit, of detrital origin, is bounded at the bottom and top by limestone lithologies, and is made up of soils and very soft rocks in alternating granular and cohesive layers. It discusses the main properties that define its geotechnical behavior: particle size distribution, plasticity, strength, compactness, consistency, compressibility, expansivity, collapsibility, permeability, and chemical aggressiveness of the materials and water. Furthermore, same numerical values are provided for reference forward guidance for future research to develop on this formation. (Author) 31 refs.

  14. A simple and low-cost combustion method to prepare monoclinic VO2 with superior thermochromic properties

    Science.gov (United States)

    Cao, Ziyi; Xiao, Xiudi; Lu, Xuanming; Zhan, Yongjun; Cheng, Haoliang; Xu, Gang

    2016-12-01

    In this approach, the VO2 nanoparticles have been successfully fabricated via combusting the low-cost precursor solution consisted of NH4VO3, C2H6O2 and C2H5OH. By the XRD, TEM and XPS analysis, it can be found that the synthetic monoclinic VO2 is single crystal and no impurity is defined. After dispersing the VO2 nanoparticles into the polymer, the solar modulation of VO2-based composite film is up to 12.5% with luminous transmission and haze around 62.2% and 0.5%, respectively. In other words, the composite films show high performance of thermochromic properties. This could open an efficient way to fabricate low-cost and large-scale VO2 (M) nanoparticles and thermochromic films.

  15. Thermal and rheological properties of nixtamalized maize starch.

    Science.gov (United States)

    Mendez-Montealvo, G; Sánchez-Rivera, M M; Paredes-López, O; Bello-Pérez, L A

    2006-12-15

    The effect of nixtamalization process on thermal and rheological characteristics of corn starch was studied. Starch of raw sample had higher gelatinization temperature than its raw counterpart, because, the Ca(2+) ions stabilize starch structure of nixtamalized sample; however, the enthalpy values were not different in both samples. The temperature of the phase transition of the retrograded starches (raw and nixtamalized) were not different at the storage times assessed, but the enthalpy values of the above mentioned transition was different, indicating a lower reorganization of the starch structure in the nixtamalized sample. The viscoamylographic profile showed differences between both starches, since raw starch had higher peak viscosity than the nixtamalized sample due to partial gelatinization of some granules during this heat treatment. Rheological test showed that at low temperature (25 degrees C) the raw and nixtamalized starches presented different behaviour; however, the elastic characteristic was more important in the starch gel structure. The nixtamalization process produced changes in thermal and rheological characteristics becoming important in those products elaborated from nixtamalized maize.

  16. Synthesis, characterization and thermal properties of inorganic-organic hybrid

    Directory of Open Access Journals (Sweden)

    2007-10-01

    Full Text Available Poly (St-MAn-APTES/silica hybrid materials were successfully prepared from styrene (St, maleic anhydride (MAn and tetraethoxysilane (TEOS in the presence of a coupling agent 3-aminopropyltriethoxysilane (APTES, by freeradical solution polymerization and in situ sol-gel process. The TEOS content varied from 0 to 25 wt%. Fourier transform infrared spectroscopy and 29Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids (condensed siloxane bonds designated as Q1, Q2, Q3, Q4, with 3-aminopropyltriethoxysilane having mono-, di-, tri, tetra-substituted siloxane bonds designated as T1, T2 and T3. The results revealed that Q3, Q4 and T3 were the major microstructure elements in forming a network structure. The hybrid materials were also characterized by the methods of solvent extraction, Transmission Electron Microscopy (TEM, differential scanning calorimetry (DSC and thermogravimetric analysis (TGA for determining the gel contents, particle size and thermal performance. The results showed that gel contents in the hybrid materials were much higher, the SiO2 phase were well dispersed in the polymer matrix, silicon dioxide existed at nanoscale in the composites, which had excellent thermal stability.

  17. Bread making properties of wheat flour supplemented with thermally processed hypoallergenic lupine flour

    Energy Technology Data Exchange (ETDEWEB)

    Guillamon, E.; Cuadrado, C.; Pedrosa, M. M.; Varela, A.; Cabellos, B.

    2010-07-01

    In recent years there has been increased interest in using lupine for human nutrition due to its nutritional properties and health benefits. Moreover, lupine is used as an ingredient in bread making because of its functional and technological properties. However, a higher number of allergic reactions to this legume have recently been reported as a consequence of a more widespread consumption of lupine-based foods. In a previous study, several thermal treatments were applied to lupine seeds and flours resulting in reduced allergenicity. In order to study how this thermal processing (autoclaving and boiling) affects the bread making properties, raw and thermally processed lupine flours were used to replace 10% of wheat flour. The effect of supplementing wheat flour with lupine flour on physical dough properties, bread structure and sensory characteristics were analysed. The results indicated that thermally-treated lupine flours, had similar bread making and sensorial properties as untreated lupine flour. These thermal treatments could increase the potential use of lupine flour as a food ingredient while reducing the risk to provoke allergic reactions. (Author) 36 refs.

  18. Thermal properties of light-weight concrete with waste polypropylene aggregate

    Science.gov (United States)

    Záleská, Martina; Pokorný, Jaroslav; Pavlíková, Milena; Pavlík, Zbyšek

    2017-07-01

    Thermal properties of a sustainable light-weight concrete incorporating high volume of waste polypropylene as partial substitution of natural aggregate were studied in the paper. Glass fiber reinforced polypropylene (GFPP), a by-product of PP tubes production, partially substituted fine natural silica aggregate in 10, 20, 30, 40, and 50 mass%. In order to quantify the effect of GFPP use on concrete properties, a reference concrete mix without plastic waste was studied as well. For the applied GFPP, bulk density, matrix density, and particle size distribution were measured. Specific attention was paid to thermal transport and storage properties of GFPP that were examined in dependence on compaction time. For the developed light-weight concrete, thermal properties were accessed using transient impulse technique, whereas the measurement was done in dependence on moisture content, from the dry state to fully water saturated state. Additionally, the investigated thermal properties were plotted as function of porosity. The tested light-weight concrete was found to be prospective construction material possessing improved thermal insulation function. Moreover, the reuse of waste plastics in concrete composition was beneficial both from the environmental and financial point of view considering plastics low biodegradability and safe disposal.

  19. Comparative study of hydrothermal treatment and thermal annealing effects on the properties of electrodeposited micro-columnar ZnO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Lupan, O., E-mail: oleg-lupan@chimie-paristech.fr [Laboratoire d' Electrochimie, Chimie des Interfaces et Modelisation pour l' Energie (LECIME), UMR 7575 CNRS, Chimie ParisTech-ENSCP, 11 rue P. et M. Curie, 75231 Paris cedex 05 (France); Department of Microelectronics and Semiconductor Devices, Technical University of Moldova, 168 Stefan cel Mare Blvd., Chisinau, MD-2004, Republic of Moldova (Moldova, Republic of); Pauporte, T., E-mail: thierry-pauporte@chimie-paristech.fr [Laboratoire d' Electrochimie, Chimie des Interfaces et Modelisation pour l' Energie (LECIME), UMR 7575 CNRS, Chimie ParisTech-ENSCP, 11 rue P. et M. Curie, 75231 Paris cedex 05 (France); Tiginyanu, I.M.; Ursaki, V.V. [Institute of Electronic Engineering and Industrial Technologies, Institute of Applied Physics, Academy of Sciences of Moldova, 5, Academiei str, MD-2028, Chisinau, Republic of Moldova (Moldova, Republic of); Sontea, V. [Department of Microelectronics and Semiconductor Devices, Technical University of Moldova, 168 Stefan cel Mare Blvd., Chisinau, MD-2004, Republic of Moldova (Moldova, Republic of); Ono, L.K.; Cuenya, B. Roldan; Chow, L. [Department of Physics, University of Central Florida, 4000 Central Florida Blvd., Orlando, FL 32816 (United States)

    2011-09-01

    We report a comparison of the role played by different sample treatments, namely, a low-temperature hydrothermal treatment by hot H{sub 2}O vapor in an autoclave versus thermal annealing in air on the properties of ZnO films grown by electrochemical deposition (ECD). Scanning electron microscopy studies reveal a homogeneous micro-columnar morphology and changes in the film surface for the two different treatments. It is found that post-growth hydrothermal treatments of ECD ZnO films at 150 deg. C under an aqueous environment enhance their structural and optical properties (photoluminescence, transmission, Raman spectra, etc.) similar to thermal annealing in air at higher temperatures (> 200 deg. C). The modifications of the structural and optical properties of ZnO samples after thermal annealing in air in the temperature range of 150-600 deg. C are discussed. The removal of chlorine from the films by the hydrothermal treatment was evidenced which could be the main reason for the improvement of the film quality. The observation of the enhanced photoluminescence peak at 380 nm demonstrates the superior properties of the hydrothermally treated ZnO films as compared to the films annealed in air ambient at the same or higher temperature. This post-growth hydrothermal treatment would be useful for the realization of high performance optoelectronic devices on flexible supports which might not withstand at high temperature annealing treatments.

  20. Phase Behavior, Thermal Stability and Rheological Properties of PPEK/PC Blends

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Phase behavior, thermal stability and rheological properties of the blends of poly(phthalazinone ether ketone) (PPEK)with bisphenol-A polycarbonate (PC) prepared by solution coprecipitation were studied using differential scanning calorimetry (DSC), Frourier-Transform IR spectroscopy (FT-IR), thermogravimetric analysis (TGA) and capillary rheometer. The DSC results indicated that PPEK/PC blends are almost immiscible in full compositions. FT-IR investigation showed that there were no apparent specific interactions between the constituent polymers. The blends keep excellent thermal stability and the addition of PC degrades the thermal stability of blends to some degree. The thermal degradation processes of the blends are much similar to that of PC. The studies on rheological properties of blends show that blending PPEK with PC is beneficial to reducing the melt viscosity and improving the appearance of PPEK.

  1. A new method for measuring the thermal regulatory properties of phase change material (PCM) fabrics

    Science.gov (United States)

    Wan, X.; Fan, J.

    2009-02-01

    Several methods already exist for the measurement of the thermal regulatory properties of fabrics containing phase change materials (PCMs). However, they do not adequately simulate the actual use condition; consequently the measurements may not have relevance to the performance of PCM fabrics in actual use. Here we report on the development of a new method, which better simulates the real use situation. In this method, a hot plate, simulating the human body, generates a constant amount of heat depending on the type of human activity to be simulated. The hot plate covered by the PCM fabric is then exposed to a thermal transient simulating a wearer moving from one thermal environment to another; the changes of surface temperature and heat loss of the hot plate are then recorded and used to characterize the thermal regulatory properties of the PCM fabrics.

  2. The effect of linear imperfection in [001] direction on the thermal properties of silver crystal

    Directory of Open Access Journals (Sweden)

    J Davoodi

    2013-09-01

    Full Text Available  The aim of this investigation was to calculate the thermal properties of silver crystal in the presence of linear imperfection. The simulations were performed by molecular dynamics simulation technique in NPT as well as NVT ensemble based on quantum Sutton-Chen many body potential. The thermal properties including cohesive energy, melting temperature, isobaric heat capacity and thermal expansion of imperfect silver crystal were calculated and compared to those of the perfect crystal. Moreover, the quantities such as radial distribution function, order parameter and lindemann index were calculated in order to obtain information on crystal structure and disorder in atoms. All calculations were done both with liner imperfection in [001] direction and without imperfection at different temperature. The simulation results show that cohesive energy, linear thermal expansion coefficient increase and melting temperature, latent heat of fusion decrease with increasing linear imperfection. Also, the results show that linear imperfection has no effect on the heat capacity.

  3. Response of mechanical properties of glasses to their chemical, thermal and mechanical histories

    DEFF Research Database (Denmark)

    Yue, Yuanzheng

    , surface, thermal history or excess entropy of the final glass state. Here I review recent progresses in understanding of the responses of mechanical properties of oxide glasses to the compositional variation, thermal history and mechanical deformation. The tensile strength, elastic modulus and hardness...... of glass fibers are dependent on the thermal history (measured as fictive temperature), tension, chemical composition and redox state. However, the fictive temperature affects the hardness of bulk glass in a complicated manner, i.e., the effect does not exhibit a clear regularity in the range...... and micro-cracks occurring during indentation of a glass is discussed briefly. Finally I describe the future perspectives and challenges in understanding responses of mechanical properties of oxide glasses to compositional variation, thermal history and mechanical deformation....

  4. Effect of Moisture Content on Thermal Properties of Porous Building Materials

    Science.gov (United States)

    Kočí, Václav; Vejmelková, Eva; Čáchová, Monika; Koňáková, Dana; Keppert, Martin; Maděra, Jiří; Černý, Robert

    2017-02-01

    The thermal conductivity and specific heat capacity of characteristic types of porous building materials are determined in the whole range of moisture content from dry to fully water-saturated state. A transient pulse technique is used in the experiments, in order to avoid the influence of moisture transport on measured data. The investigated specimens include cement composites, ceramics, plasters, and thermal insulation boards. The effect of moisture-induced changes in thermal conductivity and specific heat capacity on the energy performance of selected building envelopes containing the studied materials is then analyzed using computational modeling of coupled heat and moisture transport. The results show an increased moisture content as a substantial negative factor affecting both thermal properties of materials and energy balance of envelopes, which underlines the necessity to use moisture-dependent thermal parameters of building materials in energy-related calculations.

  5. Temperature dependence of thermo-optical properties of fluoride glasses determined by thermal lens spectrometry

    Science.gov (United States)

    Lima, S. M.; Catunda, T.; Lebullenger, R.; Hernandes, A. C.; Baesso, M. L.; Bento, A. C.; Miranda, L. C. M.

    1999-12-01

    In this work we report on the use of the thermal lens spectrometry to determine the absolute values of thermal diffusivity, thermal conductivity, and temperature coefficient of optical path-length change of several fluoride glasses. The results showed that flouride glasses doped with minor quantities of Ga, In, and Zn exhibit thermal conductivities and thermal diffusivities roughly 20% larger than that of fluorozirconate (ZBLAN) glasses, whereas their temperature coefficients for the optical path-length change was found to be 50% smaller. This suggests that these fluoride glasses may be considered as promising candidates for high power laser applications. We have also demonstrated how this technique can be used for the complete thermo-optical properties characterization as a function of temperature.

  6. Thermal properties of U–Mo alloys irradiated to moderate burnup and power

    Energy Technology Data Exchange (ETDEWEB)

    Burkes, Douglas E.; Casella, Andrew M.; Casella, Amanda J.; Buck, Edgar C.; Pool, Karl N.; MacFarlan, Paul J.; Edwards, Matthew K.; Smith, Frances N.

    2015-09-01

    A variety of physical and thermal property measurements as a function of temperature and fission density were performed on irradiated U-Mo alloy monolithic fuel samples with a Zr diffusion barrier and clad in aluminum alloy 6061. The U-Mo alloy density, thermal diffusivity, and thermal conductivity are strongly influenced by increasing burnup, mainly as the result of irradiation induced recrystallization and fission gas bubble formation and coalescence. U-Mo chemistry, specifically Mo content, and specific heat capacity was not as sensitive to increasing burnup. Measurements indicated that thermal conductivity of the U-Mo alloy decreased approximately 30% for a fission density of 2.88 × 1021 fissions cm-3 and approximately 45% for a fission density of 4.08 × 1021 fissions cm-3 from unirradiated values at 200 oC. An empirical thermal conductivity degradation model developed previously and summarized here agrees well with the experimental measurements.

  7. Thermal Properties of West Siberian Sediments in Application to Basin and Petroleum Systems Modeling

    Science.gov (United States)

    Romushkevich, Raisa; Popov, Evgeny; Popov, Yury; Chekhonin, Evgeny; Myasnikov, Artem; Kazak, Andrey; Belenkaya, Irina; Zagranovskaya, Dzhuliya

    2016-04-01

    Quality of heat flow and rock thermal property data is the crucial question in basin and petroleum system modeling. A number of significant deviations in thermal conductivity values were observed during our integral geothermal study of West Siberian platform reporting that the corrections should be carried out in basin models. The experimental data including thermal anisotropy and heterogeneity measurements were obtained along of more than 15 000 core samples and about 4 500 core plugs. The measurements were performed in 1993-2015 with the optical scanning technique within the Continental Super-Deep Drilling Program (Russia) for scientific super-deep well Tyumenskaya SG-6, parametric super-deep well Yen-Yakhinskaya, and deep well Yarudeyskaya-38 as well as for 13 oil and gas fields in the West Siberia. Variations of the thermal conductivity tensor components in parallel and perpendicular direction to the layer stratification (assessed for 2D anisotropy model of the rock studied), volumetric heat capacity and thermal anisotropy coefficient values and average values of the thermal properties were the subject of statistical analysis for the uppermost deposits aged by: T3-J2 (200-165 Ma); J2-J3 (165-150 Ma); J3 (150-145 Ma); K1 (145-136 Ma); K1 (136-125 Ma); K1-K2 (125-94 Ma); K2-Pg+Ng+Q (94-0 Ma). Uncertainties caused by deviations of thermal conductivity data from its average values were found to be as high as 45 % leading to unexpected errors in the basin heat flow determinations. Also, the essential spatial-temporal variations in the thermal rock properties in the study area is proposed to be taken into account in thermo-hydrodynamic modeling of hydrocarbon recovery with thermal methods. The research work was done with financial support of the Russian Ministry of Education and Science (unique identification number RFMEFI58114X0008).

  8. Identification of thermal properties distribution in building wall using infrared thermography

    OpenAIRE

    Brouns, Jordan; Dumoulin, Jean

    2016-01-01

    International audience; In the construction sector, most of the measurements carried out from IR camera devices are exploited in a qualitative way (e.g. observation of thermal bridges). However, unless a quantitative analysis is realized, it is not possible to assess the impact of the observed phenomena. Most of research efforts and proposed solutions to identify quantified thermal properties (e.g. U-values) have to be completed, adapted to the built environment and validated in experimental ...

  9. Complex methodology for determining the thermal properties of solid wastes from fossil fuels

    Energy Technology Data Exchange (ETDEWEB)

    Belyaev, A.A.; Glushnev, S.V.; Ignatova, N.N.

    1983-01-01

    Comparative method based on theory is presented for determining the thermal capacity and heat conductivity of wastes from coal mining and processing. A schematic diagram of an apparatus for measuring thermal properties of solids is presented. The method described determines effective heat capacity and coefficient of heat conductivity. The accuracy of the method and its limitations in laboratory and industrial practice are discussed. (6 refs.)

  10. Quantum Fluctuation Properties of Polariton System in Thermal Vacuum State Field

    Institute of Scientific and Technical Information of China (English)

    邵彬; 余天胜; 邹健; 曾天海

    2004-01-01

    Using the theory of thermal field dynamics (TFD), a model polariton system is investigated and the squeezing properties of the polariton system at finite temperature is discussed. It is shown that when the photon field is initially in a thermal vacuum state and the phonon initially in its lowest energy level state (the vacuum state), the phonon, photon and also the polariton system can exhibit nonclassical behaviour.

  11. Study on thermal properties of Cd-Ni batteries for satellites

    Science.gov (United States)

    Jingang, Hu

    1995-06-01

    Empirical research was carried out on thermal properties associated with the use of Cd-Ni storage cells in satellite engineering. Introduction is made of measured cell thermal capacities as well as amounts of heat put out by systems. The systems in question possess the advantages of being simple and reliable. Measured results are given, and, in conjunction with that, comparisons are carried out with data from abroad.

  12. Thermal Properties Of Chitin Whiskers Reinforced PolyAcrylic Acid

    Directory of Open Access Journals (Sweden)

    Michael Ikpi Ofem

    2015-08-01

    Full Text Available ABSTRACT Thermal analysisTGA of samples of Chitin PAA and Chitin-PAA complexes containing different weight fractions of chitin whiskers were investigated. The activation energies Ea and other kinematic parameters amp916S amp916H and amp916G for the filler matrix and blend were calculated using the Coats and Redfern Broido and Horowitz and Metzger methods at the second and third stages of decomposition. The study showed that the kinetic parameters for the composites lie between the matrix and the filler. .At each filler loading level the activation energies changes in enthalpies entropies and Gibbs functions obtained using all three methods are comparable for the second region of decomposition. The pattern is such that the value of these energy parameters gradually decreased as filler loading decreases. The gradual increase in activation energy as filler increases is attributed to even dispersion of the whiskers and interfacial adhesion between the matrix and the chitin whiskers.

  13. THERMAL PROPERTIES OF TRANSPARENT BARRIER MODIFIED WITH ORGANIC PCMS

    Directory of Open Access Journals (Sweden)

    Michał MUSIAŁ

    2016-03-01

    Full Text Available Renewable energy sources are increasingly often applied in civil engineering as a mean to reduce buildings energy demand for heating. One of the ways to reduce HVAC energy demand is to limit heat transfer and excessive solar gain through building's glazed barriers. Preliminary results of the research conducted on organic PCM-modified transparent barrier are presented in this paper. Multiple publications concerning PCMs application in structural materials have recently appeared. Most of them are focused on modification of structure of non-transparent sections of buildings' envelope. Augmenting a glazed barrier with PCMs increases its heat capacity and thermal resistance. The most important feature of the assembly is the thermal buffer, a product of PCM's considerable value of specific latent heat. Research were conducted on a triple-pane transparent rectangular barrier, that constituted one of the faces of cubic chamber. Internal volume of the chamber was 1m3. The applied PCM was a mixture of saturated and non-saturated hydrocarbons. The described assembly was subjected to temperature and radiation that occur in Poland during winter. Glazing temperature, melted/total PCM ratio were measured, as well as energy demand for keeping internal temperature at constant level. Measurements were made in steady states, for various PCM layer thickness. The influence of the modification on energy demand was determined, along with the most effective and rational thickness of PCM layer to be applied. Conducted research enabled to develop a basis for further investigation of PCMs application in civil engineering.

  14. Properties of stable nonstoichiometric nanoceria produced by thermal plasma

    Science.gov (United States)

    Lan, Yuan-Pei; Sohn, Hong Yong; Mohassab, Yousef; Liu, Qingcai; Xu, Baoqiang

    2017-08-01

    Thermally stable blue nonstoichiometric nanoceria was produced by feeding nanoceria with an average size of 50 nm into a DC thermal plasma reactor. The effects of different plasma power levels and atmospheres were investigated. XRD results showed the ceria lattice parameter increased with plasma power. SEM and TEM results showed that the shape of nanoparticles changed after plasma treatment; the blue nonstoichiometric nanoceria had highly regular shapes such as triangular pyramids and polyhedral in contrast to the irregular shape of the raw nanoceria. Significant downshift was found in the Raman spectra of the plasma products, with a 7.9-cm-1 shift compared with raw nanoceria, which was explained by the reduction of Ce4+. X-ray photoelectron spectroscopy results showed that the Ce3+ fraction increased from 14% in the raw nanoceria to 38-39% for the product CeO2- x , indicating the high reduction state on the ceria surface. It was determined that this blue nonstoichiometric nanoceria was stable up to 400 °C in air, but the color changed to pale yellow after 4 h at 500 °C in air indicating oxidation to CeO2. Additionally, this novel stable nano-CeO2- x caused a red shift in the UV-visible absorption results; a 48-nm red shift occurred for the nonstoichiometric nanoceria produced at 15 kW compared with the raw nanoceria. The band gap was calculated to be 2.5 eV while it was 3.2 eV for the raw nanoceria, indicating that this novel stable blue nonstoichiometric nanoceria should be a promising material for optical application.

  15. Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete

    OpenAIRE

    Zhang, Z.; Provis, J.L.; A. Reid; Wang, H.

    2015-01-01

    This study reports the synthesis and characterization of geopolymer foam concrete (GFC). A Class F fly ash with partial slag substitution was used for GFC synthesis by mechanical mixing of preformed foam. The GFCs exhibited 28 d compressive strengths ranging from 3 to 48 MPa with demolded densities from 720 to 1600 kg/m3 (105 °C oven-dried densities from 585 to 1370 kg/m3), with the different densities achieved through alteration of the foam content. The thermal conductivity of GFCs was in th...

  16. The transient divided bar method for laboratory measurements of thermal properties

    Science.gov (United States)

    Bording, Thue S.; Nielsen, Søren B.; Balling, Niels

    2016-12-01

    Accurate information on thermal conductivity and thermal diffusivity of materials is of central importance in relation to geoscience and engineering problems involving the transfer of heat. Several methods, including the classical divided bar technique, are available for laboratory measurements of thermal conductivity, but much fewer for thermal diffusivity. We have generalized the divided bar technique to the transient case in which thermal conductivity, volumetric heat capacity and thereby also thermal diffusivity are measured simultaneously. As the density of samples is easily determined independently, specific heat capacity can also be determined. The finite element formulation provides a flexible forward solution for heat transfer across the bar, and thermal properties are estimated by inverse Monte Carlo modelling. This methodology enables a proper quantification of experimental uncertainties on measured thermal properties and information on their origin. The developed methodology was applied to various materials, including a standard ceramic material and different rock samples, and measuring results were compared with results applying traditional steady-state divided bar and an independent line-source method. All measurements show highly consistent results and with excellent reproducibility and high accuracy. For conductivity the obtained uncertainty is typically 1-3 per cent, and for diffusivity uncertainty may be reduced to about 3-5 per cent. The main uncertainty originates from the presence of thermal contact resistance associated with the internal interfaces in the bar. These are not resolved during inversion and it is imperative that they are minimized. The proposed procedure is simple and may quite easily be implemented to the many steady-state divided bar systems in operation. A thermally controlled bath, as applied here, may not be needed. Simpler systems, such as applying temperature-controlled water directly from a tap, may also be applied.

  17. Thermal stability and thermodynamic properties of hybrid proton-conducting polyaryl etherketones.

    Science.gov (United States)

    Marani, D; Di Vona, M L; Traversa, E; Licoccia, S; Beurroies, I; Llewellyn, P L; Knauth, P

    2006-08-17

    The thermal and structural stability of sulfonated cross-linked PEEK (polyether ether ketone) and its silicon-containing class II hybrid derivatives were characterized by combination of mass spectrometry, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. Thermodynamic properties of the hybrids were determined, including glass-transition temperature, degree of crystallinity, and thermal stability. The decomposition processes of the hybrid polymers could be consistently interpreted and their energetics quantitatively determined. The introduction of inorganic silanol moieties improves the thermal stability compared to sulfonated products.

  18. Fast preparation and thermal transport property of TiCoSb-based half-Heusler compounds

    Institute of Scientific and Technical Information of China (English)

    Xie Wen-Jie; Tang Xin-Feng; Zhang Qing-Jie

    2007-01-01

    TiCoSb-based half-Heusler compounds with the substitution of Zr for Ti have been prepared quickly by combining high-energy ball milling method with spark plasma sintering technique, and their thermal transport properties have been investigated. With the increase of the concentration of Zr, the thermal conductivity of Ti1-xZrxCoSb compounds decreases significantly. Compared with the thermal conductivity of TiCoSb compound, that of Ti0.5Zr0.5CoSb decreases by 200% at 1000 K.

  19. Study on the effect of thermal property of metals in ultrasonic-assisted laser machining

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hu Seung; Kim, Gun Woo; Park, Jong Eun [Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Cho, Sung Hak; Yang, Min Yang; Park, Jong Kweon [Korea Institute of Machinery and Materials, Deajeon (Korea, Republic of)

    2015-08-15

    The laser machining process has been proposed as an advanced process for the selective fabrication of electrodes without a mask. In this study, we adapt laser machining to metals that have different thermal properties. Based on the results, the metals exhibit a different surface morphology, heat-affected zone (HAZ), and a recast layer around the machined surface according to their thermal conductivity, boiling point, and thermal diffusivity. Then, we apply ultrasonic-assisted laser machining to remove the recast layer. The ultrasonic-assisted laser machining exhibits a better surface quality in metals with higher diffusivity than those having lower diffusivity.

  20. Determination of relationships between thermal conductivity and material properties of rocks

    Institute of Scientific and Technical Information of China (English)

    Kazim G(o)rgülü

    2004-01-01

    Energy transfer between the adjacent parts of rocks in underground mines is widely influenced by the thermal conductivity of rocks. The relationships between the thermal conductivity and some material properties of rocks such as the uniaxial compressive strength, unit mass, tensile strength, cohesion, Young's modulus, point load strength, Schmidt rebound hardness, Shore scleroscope hardness and toughness strength were investigated. The statistical analysis of the data obtained in laboratory tests shows that the thermal conductivity increases with increasing the uniaxial compressive strength, unit mass, tensile strength, cohesion, Young's modulus, point load strength, Schmidt rebound hardness and Shore scleroscope hardness, and decreases with increasing the toughness strength.

  1. Thermal properties of wood-derived silicon carbide and copper-silicon carbide composites

    Science.gov (United States)

    Pappecena, Kristen E.

    Wood-derived ceramics and composites have been of interest in recent years due to their unique microstructures, which lead to tailorable properties. The porosity and pore size distribution of each wood type is different, which yields variations in properties in the resultant materials. The thermal properties of silicon carbide ceramics and copper-silicon carbide composites derived from wood were studied as a function of their pore structures. Wood was pyrolyzed at temperatures ranging from 300-2400°C to yield porous carbon. The progression toward long-range order was studied as a function of pyrolyzation temperature. Biomorphic silicon carbide (bioSiC) is a porous ceramic material resulting from silicon melt infiltration of these porous carbon materials. BioSiC has potential applicability in many high temperature environments, particularly those in which rapid temperature changes occur. To understand the behavior of bioSiC at elevated temperatures, the thermal and thermo-mechanical properties were studied. The thermal conductivity of bioSiC from five precursors was determined using flash diffusivity at temperatures up to 1100°C. Thermal conductivity results varied with porosity, temperature and orientation, and decreased from 42-13 W/mK for porosities of 43-69%, respectively, at room temperature. The results were compared with to object-oriented finite-element analysis (OOF). OOF was also used to model and understand the heat-flow paths through the complex bioSiC microstructures. The thermal shock resistance of bioSiC was also studied, and no bioSiC sample was found to fail catastrophically after up to five thermal shock cycles from 1400°C to room temperature oil. Copper-silicon carbide composites have potential uses in thermal management applications due to the high thermal conductivity of each phase. Cu-bioSiC composites were created by electrodeposition of copper into bioSiC pores. The detrimental Cu-SiC reaction was avoided by using this room temperature

  2. Effect of Mo content on thermal and mechanical properties of Mo–Ru–Rh–Pd alloys

    Energy Technology Data Exchange (ETDEWEB)

    Masahira, Yusuke [Division of Sustainable Energy and Environment Engineering, Graduate School of Engineering, Osaka University (Japan); Ohishi, Yuji, E-mail: ohishi@see.eng.osaka-u.ac.jp [Division of Sustainable Energy and Environment Engineering, Graduate School of Engineering, Osaka University (Japan); Kurosaki, Ken; Muta, Hiroaki [Division of Sustainable Energy and Environment Engineering, Graduate School of Engineering, Osaka University (Japan); Yamanaka, Shinsuke [Division of Sustainable Energy and Environment Engineering, Graduate School of Engineering, Osaka University (Japan); Research Institute of Nuclear Engineering, University of Fukui (Japan); Komamine, Satoshi; Fukui, Toshiki; Ochi, Eiji [Japan Nuclear Fuel Limited (Japan)

    2015-01-15

    Metallic inclusions are precipitated in irradiated oxide fuels. The composition of the phases varies with the burnup and the conditions such as temperature gradients and oxygen potential of the fuel. In the present work, Mo{sub x/(0.7+x)} (Ru{sub 0.5}Rh{sub 0.1}Pd{sub 0.1}){sub (0.7)/(0.7+x)} (x = 0, 0.05, 0.1, 0.15, 0.2, and 0.25) alloys were prepared by arc melting, followed by annealing in a high vacuum. The thermal and mechanical properties of the alloys such as elastic moduli, Debye temperature, micro-Vickers hardness, electrical resistivity, and thermal conductivity have been evaluated to elucidate the effect of Mo content on these physical properties of the alloys. The alloys with lower Mo contents show higher thermal conductivity. The thermal conductivity of the alloy with x = 0 is almost twice of that of the alloy with x = 0.25. The thermal conductivities of the alloys are dominated by electronic contribution, which has been evaluated using the Wiedemann–Franz–Lorenz relation from the electrical resistivity data. It is confirmed that the variation of the Mo contents of the alloys considerably affects the mechanical and thermal properties of the alloys.

  3. Microstructural evolution and mechanical properties of Inconel 718 after thermal exposure

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Z.S., E-mail: yuzaisong@tpri.com.cn [State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049 (China); Xi' an Thermal Power Research Institute Co. Ltd., No. 136, Xingqing Road, Xi’an 710032 (China); Zhang, J.X. [State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049 (China); Yuan, Y.; Zhou, R.C.; Zhang, H.J.; Wang, H.Z. [Xi' an Thermal Power Research Institute Co. Ltd., No. 136, Xingqing Road, Xi’an 710032 (China)

    2015-05-14

    Inconel 718 was subjected to various heat treatments, i.e., solution heat treatment, standard ageing treatment and standard ageing plus 700 °C thermal exposure. The mechanical properties of the alloys were determined using tensile tests and Charpy pendulum impact tests at 650 °C and room temperature, respectively. The highest yield strength of 988 MPa was attained in the standard aged specimen, whereas a maximum impact toughness of 217 J cm{sup −2} was attained in the solution-treated specimen. After thermal exposure, the mechanical properties of the specimens degrade. Both the yield strength and impact toughness decreased monotonically with increasing thermal exposure time. Subjected to a 10000-h long-term thermal exposure, the yield strength dramatically decreased to 475 MPa (almost 50% of the maximum strength), and the impact toughness reduced to only 18 J cm{sup −2}. The microstructures of the specimens were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Coarsening of γ′ and γ″ and the transformation of γ″ to δ-Ni{sub 3}Nb was observed after thermal exposure. However, a complete transformation from metastable γ″ to δ-Ni{sub 3}Nb was never accomplished, even after the 10000-h long-term thermal exposure. Based on the obtained experimental results, the effects of the microstructural evolution on the mechanical properties are discussed.

  4. Effect of equilibrium moisture content on barrier, mechanical and thermal properties of chitosan films.

    Science.gov (United States)

    Aguirre-Loredo, Rocío Yaneli; Rodríguez-Hernández, Adriana Inés; Morales-Sánchez, Eduardo; Gómez-Aldapa, Carlos Alberto; Velazquez, Gonzalo

    2016-04-01

    Water molecules modify the properties of biodegradable films obtained from hydrophilic materials. Most studies dealing with thermal, mechanical and barrier properties of hydrophilic films are carried out under one relative humidity (RH) condition. The objective of this work was to evaluate the effect of the moisture content on the thermal, mechanical and barrier properties of chitosan films under several RH conditions. Microclimates, obtained with saturated salt solutions were used for conditioning samples and the properties of the films were evaluated under each RH condition. Chitosan films absorbed up to 40% of moisture at the higher RH studied. The percentage of elongation and the water vapour permeability increased while tensile strength, Young's modulus and glass transition temperature decreased, when the moisture content increased. The results suggest that the water molecules plasticized the polymer matrix, changing the properties when the films were in contact with high RH environments.

  5. Mechanical, thermal and swelling properties of phosphorylated nanocellulose fibrils/PVA nanocomposite membranes.

    Science.gov (United States)

    Niazi, Muhammad Bilal Khan; Jahan, Zaib; Berg, Sigrun Sofie; Gregersen, Øyvind Weiby

    2017-12-01

    Cellulose nanofibrils (CNF) have strong reinforcing properties when incorporated in a compatible polymer matrix. This work reports the effect of the addition of phosphorylated nanocellulose (PCNF) on the mechanical, thermal and swelling properties of poly(vinyl alcohol) (PVA) nanocomposite membranes. The incorporation of nanocellulose in PVA reduced the crystallinity at 0%RH. However, when the films were exposed to higher humidities the crystallinity increased. No apparent trend is observed for mechanical properties for dry membranes (0% RH). However, at 93% RH the elastic modulus increased strongly from 0.12MPa to 0.82MPa when adding 6% PCNF. At higher humidities, the moisture uptake has large influence on storage modulus, tan δ and tensile properties. Membranes containing 1% PCNF absorbed most moisture. Swelling, thermal and mechanical properties indicate a good potential for applying of PVA/phosphorylated nanocellulose composite membranes for CO2 separation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Measurement of Thermal Properties of Triticale Starch Films Using Photothermal Techniques

    Science.gov (United States)

    Correa-Pacheco, Z. N.; Cruz-Orea, A.; Jiménez-Pérez, J. L.; Solorzano-Ojeda, S. C.; Tramón-Pregnan, C. L.

    2015-06-01

    Nowadays, several commercially biodegradable materials have been developed with mechanical properties similar to those of conventional petrochemical-based polymers. These materials are made from renewable sources such as starch, cellulose, corn, and molasses, being very attractive for numerous applications in the plastics, food, and paper industries, among others. Starches from maize, rice, wheat, and potato are used in the food industry. However, other types of starches are not used due to their low protein content, such as triticale. In this study, starch films, processed using a single screw extruder with different compositions, were thermally and structurally characterized. The thermal diffusivity, thermal effusivity, and thermal conductivity of the biodegradable films were determined using photothermal techniques. The thermal diffusivity was measured using the open photoacoustic cell technique, and the thermal effusivity was obtained by the photopyroelectric technique in an inverse configuration. The results showed differences in thermal properties for the films. Also, the films microstructures were observed by scanning electron microscopy, transmission electron microscopy, and the crystalline structure determined by X-ray diffraction.

  7. Thermal property measurement of insulating material used in HTS power device

    Science.gov (United States)

    Choi, Yeon Suk; Kim, Dong Lak

    2012-10-01

    An experiment to measure the thermal property of insulating material at cryogenic temperature has been performed. The main objective of this study is to develop a precise instrument for measuring the thermal property of insulating materials over a temperature range of 30 K to approximately room temperature by utilizing a cryocooler. In a vacuum chamber, the cold head of the cryocooler is thermally anchored to the copper link and used to bring the apparatus to a desired temperature. An electric heater is placed in the middle of test sample for generating uniform heat flux. The entire apparatus is covered by thermal shields and wrapped in multi-layer insulation to minimize thermal radiation in a vacuum chamber. For a supplied heat flux the temperature distribution in test sample, polypropylene laminated paper (PPLP), is measured in steady state, from which the effective thermal conductivity is calculated and presented with respect to the mean temperature. The correlation near liquid nitrogen temperature is derived from measured data. Moreover, using the measured thermal conductivity, we obtain the specific heat of PPLP by solving one-dimensional heat diffusion equation.

  8. Mapping of thermal properties of comet 67P/C-G and temporal variations

    Science.gov (United States)

    Leyrat, Cedric; Tosi, Federico; Capaccioni, Fabrizio; Érard, Stéphane; Rousseau, Batiste; Filacchione, Gianrico; Capria, Maria Teresa; De Sanctis, Maria Cristina; Bockelee-Morvan, Dominique; Kührt, Ekkehard; Schmitt, Bernard; Migliorini, Alessandra; Kappel, David; VIRTIS/Rosetta Team

    2016-10-01

    The long-term evolution of the surfaces of comets depends mainly on the erosion rate that is driven by the thermal properties of the regolith and the sub-surface material. Following the diurnal and the seasonal thermal cycles, dust and gas are released progressively, increasing the erosion process. The amount of dust released depends on the surface and subsurface temperatures and thus on thermal inertia and bulk composition.The ESA's Rosetta spacecraft has followed the comet 67P/Churyumov-Gerasimenko over several months from 4 AU to 1.28 AU heliocentric distance, and the VIRTIS/Rosetta imaging infrared spectrometer was capable of detecting the thermal emission of the surface longward of 3 microns.The surface temperature was mapped over a large fraction of the nucleus and was previously used to derive thermal inertia of the main geomorphological units.In this presentation, we now focus on two different aspects: (1) We aim to present a complete detailed map of the thermal inertia by combining measurements of similar areas obtained at different viewing angles ; and (2) we track the evolution of the local thermal properties derived over months when the comet was moving towards perihelion. We then discuss and compare our results with the textural features observed at the surface.

  9. Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)

    Science.gov (United States)

    Ganvir, Ashish; Curry, Nicholas; Björklund, Stefan; Markocsan, Nicolaie; Nylén, Per

    2015-10-01

    The paper aims at demonstrating various microstructures which can be obtained using the suspension spraying technique and their respective significance in enhancing the thermal insulation property of a thermal barrier coating. Three different types of coating microstructures are discussed which were produced by the Axial Suspension Plasma Spraying. Detailed characterization of coatings was then performed. Optical and scanning electron microscopy were utilized for microstructure evaluations; x-ray diffraction for phase analysis; water impregnation, image analysis, and mercury intrusion porosimetry for porosity analysis, and laser flash analysis for thermal diffusivity measurements were used. The results showed that Axial Suspension Plasma Spraying can generate vertically cracked, porous, and feathery columnar-type microstructures. Pore size distribution was found in micron, submicron, and nanometer range. Higher overall porosity, the lower density of vertical cracks or inter-column spacing, and higher inter-pass porosity favored thermal insulation property of the coating. Significant increase in thermal diffusivity and conductivity was found at higher temperature, which is believed to be due to the pore rearrangement (sintering and pore coarsening). Thermal conductivity values for these coatings were also compared with electron beam physical vapor deposition (EBPVD) thermal barrier coatings from the literature and found to be much lower.

  10. First-Principles Calculations of Elastic and Thermal Properties of Lanthanum Hexaboride

    Institute of Scientific and Technical Information of China (English)

    XU Guo-Liang; CHEN Jing-Dong; XIA Yao-Zheng; LIU Xue-Feng; LIU Yu-Fang; ZHANG Xian-Zhou

    2009-01-01

    The plane-wave pseudopotential method using the generalized gradient approximation within the framework of density functional theory is applied to anaylse the bulk modulus, thermal expansion coefficient and heat capacity of LAB6. The quasi-harmonic Debye model, using a set of total energy versus volume obtained with the plane-wave pseudopotential method, is applied to the study of the thermal properties and vibrational effects. We analyse the bulk modulus of LaB6 up to 150OK. The elastic properties calculations show that our system is mechanically stable. For the heat capacity and the thermal expansion, significant differences in properties are observed above 30OK. The calculated zero pressure bulk modulus is in good agreement with the experimentai data. Moreover,the Debye temperatures are determined from the non-equilibrium Gibbs functions and compared to available data.

  11. Thermal and mechanical interfacial properties of the DGEBA/PMR-15 blend system.

    Science.gov (United States)

    Park, Soo-Jin; Lee, Hwa-Young; Han, Mijeong; Hong, Sung-Kwon

    2004-02-15

    In this work, the blend system of diglycidyl ether of bisphenol A and PMR-15 polyimide is investigated in terms of thermal and dynamic mechanical interfacial properties of the casting specimens. The thermal stabilities are studied by thermogravimetric and thermomechanical analyses, and the dynamic mechanical properties are carried out by dynamic mechanical analysis. The results show that the thermal stabilities based on the initial decomposition temperature, the integral procedural decomposition temperature, and the glass transition temperature are increased with increasing PMR-15 content. The crosslinking density (rho) of the blend system is increased at 10 phr of PMR-15, compared with that of neat epoxy. Mechanical interfacial properties measured in the context of critical stress intensity factor and critical strain energy release rate show similar behaviors with E(a) and rho, probably due to the increase in intermolecular interactions or hydrogen bondings in polymer chains.

  12. Dielectric and Thermal Properties of Transformer Oil Modified by Semiconductive CdS Quantum Dots

    Science.gov (United States)

    Abd-Elhady, Amr M.; Ibrahim, Mohamed E.; Taha, T. A.; Izzularab, Mohamed A.

    2016-10-01

    In this paper, modified transformer oil semiconductor quantum dots (QDs) are presented. Cadmium sulfide (CdS) quantum dots of radius 4.5 nm with a hexagonal crystal structure are added to transformer oil to improve its dielectric and thermal properties. CdS QDs modified oil is prepared considering different filler loading levels. Alternating current breakdown voltages of the transformer oil samples before and after the modification are measured based on American Society for Testing and Materials D1816 standard. The relative permittivity and dissipation factor are measured for all samples. Also, thermal properties of the oil samples are experimentally evaluated according to the temperature change measurement considering heating and cooling processes. The results show significant improvements in dielectric and thermal properties of the modified transformer oil, as well as an increase in the breakdown strength by about 81% in comparison to the base transformer oil.

  13. Design and construction of models of solar thermal facilities in the ''Centro integrado de FP superior de energias renovables de Imarcoain''(Navarra); Maquetas de instalaciones solares termicas para la formacion profesional de grado superior en el centro integrado de formacion profesional superior de energias renovables

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, M. A.; Orus, L. M.; Yerro, C.; Aguado, H.; Cambra, T.; Oroz, J.

    2004-07-01

    This article shows how we have approached the solar energy installations in the ''Centro integrado de FP superior de energias renovables de Imarcoain''(Navarra) with the design and construction of models which allow us to teach in this type of installations at different levels. (Author)

  14. Determination of physical properties of fibrous thermal insulation

    Directory of Open Access Journals (Sweden)

    Jeandel G.

    2012-10-01

    Full Text Available The objective of this study is to characterize both experimentally and theoretically, conductive and radiative heat transfer within polyester batting. This material is derived from recycled bottles (PET with fibres of constant diameters. Two other mineral and plant fibrous insulation materials, (glass wool and hemp wool are also characterized for comparative purposes. To determine the overall thermophysical properties of the tested materials, heat flux measurement are carried out using a device developed in house. The radiative properties of the material are determined by an inverse method based on measurements of transmittance and reflectance using a FTIR spectrometer and by solving the equation of radiative heat transfer. These measures are compared to results of numerical simulations.

  15. Determination of physical properties of fibrous thermal insulation

    Science.gov (United States)

    Tilioua, A.; Libessart, L.; Joulin, A.; Lassue, S.; Monod, B.; Jeandel, G.

    2012-10-01

    The objective of this study is to characterize both experimentally and theoretically, conductive and radiative heat transfer within polyester batting. This material is derived from recycled bottles (PET) with fibres of constant diameters. Two other mineral and plant fibrous insulation materials, (glass wool and hemp wool) are also characterized for comparative purposes. To determine the overall thermophysical properties of the tested materials, heat flux measurement are carried out using a device developed in house. The radiative properties of the material are determined by an inverse method based on measurements of transmittance and reflectance using a FTIR spectrometer and by solving the equation of radiative heat transfer. These measures are compared to results of numerical simulations.

  16. Synthesis, characterization and thermal properties of thiosalicylate ionic liquids

    Indian Academy of Sciences (India)

    Cecilia Devi Wilfred; Fadwa Babiker Mustafa

    2013-11-01

    In an attempt to produce new functionalized ionic liquids, a series of thiosalicylate ionic liquids based on imidazolium, ammonium, phosphonium, choline and pyrrolidinium cations were synthesized. The compounds were characterized by Infra Red (IR), Nuclear Magnetic Resonance (NMR) and mass spectra (ESI-MS). Their glass-transition temperatures, melting points and decomposition temperatures have been measured. Physicochemical properties of ionic liquids are influenced by alkyl chain length and nature of the cation of ionic liquids.

  17. Phenylethynyl Silsesquioxanes: Monomer Synthesis, Characterization,Thermolysis and Thermal Properties

    Science.gov (United States)

    2016-12-14

    with organic modifiers (RSiO1.5)n; the organic periphery determines how well the POSS can interact with any host polymer, while the siliceous core adds...thermoxidative stability . Beginning in 1993 and continuing today, there has been extensive research in understanding how POSS incorporation into...high temperature materials with extreme thermo-oxidative stability , low moisture uptake and good mechanical properties. 15. SUBJECT TERMS N/A 16

  18. Nanofluid Types, Their Synthesis, Properties and Incorporation in Direct Solar Thermal Collectors: A Review

    Science.gov (United States)

    Chamsa-ard, Wisut; Brundavanam, Sridevi; Fung, Chun Che; Fawcett, Derek; Poinern, Gerrard

    2017-01-01

    The global demand for energy is increasing and the detrimental consequences of rising greenhouse gas emissions, global warming and environmental degradation present major challenges. Solar energy offers a clean and viable renewable energy source with the potential to alleviate the detrimental consequences normally associated with fossil fuel-based energy generation. However, there are two inherent problems associated with conventional solar thermal energy conversion systems. The first involves low thermal conductivity values of heat transfer fluids, and the second involves the poor optical properties of many absorbers and their coating. Hence, there is an imperative need to improve both thermal and optical properties of current solar conversion systems. Direct solar thermal absorption collectors incorporating a nanofluid offers the opportunity to achieve significant improvements in both optical and thermal performance. Since nanofluids offer much greater heat absorbing and heat transfer properties compared to traditional working fluids. The review summarizes current research in this innovative field. It discusses direct solar absorber collectors and methods for improving their performance. This is followed by a discussion of the various types of nanofluids available and the synthesis techniques used to manufacture them. In closing, a brief discussion of nanofluid property modelling is also presented. PMID:28561802

  19. Properties of unirradiated fuel element graphites H-451 and SO818. [Bulk density, tensile properties, thermal expansion, thermal conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Engle, G.B.; Johnson, W.R.

    1976-10-08

    Nuclear graphites H-451, lot 440 (Great Lakes Carbon Corporation (GLCC)), and SO818 (Airco Speer Division, Air Reduction Corporation (AS)) are described, and physical, mechanical, and chemical property data are presented for the graphites in the unirradiated state. A summary of the mean values of the property data and of data on TS-1240 and H-451, lot 426, is tabulated. A direct comparison of H-451, lot 426, chosen for Fort St. Vrain (FSV) fuel reload production, TS-1240, and SO818 may be made from the table. (auth)

  20. Structural and thermal properties of γ – irradiated Bombyx mori silk fibroin films

    Energy Technology Data Exchange (ETDEWEB)

    Madhukumar, R.; Asha, S.; Rao, B. Lakshmeesha; Shivananda, C. S.; Harish, K. V.; Sangappa, E-mail: syhalabhavi@yahoo.co.in [Department of Studies in Physics, Mangalore University, Mangalagangotri, Mangalore - 574199 (India); Sarojini, B. K. [Department of Studies in Chemistry, Mangalore University, Mangalagangotri, Mangalore - 574199 (India); Somashekar, R. [Department of Studies in Physics, University of Mysore, Manasagangotri, Mysore - 570006 (India)

    2015-06-24

    The gamma radiation-induced change in structural and thermal properties of Bombyx mori silk fibroin films were investigated and have been correlated with the applied radiation doses. Irradiation of samples were carried out in dry air at room temperature using Co-60 source, and radiation doses are in the range of 0 - 300 kGy. Structural and thermal properties of the irradiated silk films were studied using X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA) and compared with unirradiated sample. Interesting results are discussed in this report.

  1. Method for calculating thermal properties of lightweight floor heating panels based on an experimental setup

    DEFF Research Database (Denmark)

    Weitzmann, Peter; Svendsen, Svend

    2005-01-01

    Lightweight floor heating systems consist of a plastic tube connected to a heat distribution aluminium plate and are used in wooden floor constructions. The thermal properties of lightweight floor heating systems cannot be described accurately. The reason is a very complex interaction of convection......, radiation and conduction of the heat transfer between pipe and surrounding materials. The European Standard for floor heating, EN1264, does not cover lightweight systems, while the supplemental Nordtest Method VVS127 is aimed at lightweight systems. The thermal properties can be found using tabulated values...

  2. Thermal and Transmission Properties of UV Nonlinear Optical Material-- ZnCd(SCN)4 Crystal

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Zinc cadmium thiocyanate(ZCTC), ZnCd(SCN)4, has been discovered as a UV second-order nonlinear optical coordination crystal. Its thermal and transmission properties are reported. The thermal decomposition is characterized by using the X-ray powder diffraction (XRPD) and infrared (IR) spectroscopy at room temperature. The absorptions of intrinsic ions and ZCTC in a solution state are discussed as well as transmission properties of the ZCTC crystal. An effective method of reducing the surface reflection loss of ZCTC crystal is introduced.

  3. Effects of thermal annealing on Cu/6H-SiC Schottky properties

    Energy Technology Data Exchange (ETDEWEB)

    Hatayama, T.; Suezaki, T.; Kawahito, K.; Uraoka, Y.; Fuyuki, T. [Nara Inst. of Science and Technology, Ikoma (Japan). Graduate School of Materials Science

    2001-07-01

    Effects of thermal annealing for copper (Cu) contacts on 6H-SiC (0001) Si-face were analyzed in detail. Cu/6H-SiC structures had good Schottky electrical properties with the ideality factor below 1.1 even after thermal annealing at 500 C. The barrier height of 1.22 V for an as-deposited Cu contact increased to 1.45 V after annealing at 500 C. However, electrical properties were deteriorated after annealing over 500 C, which is caused by the formation of copper silicides at the Cu/6H-SiC interface. (orig.)

  4. Thermal and Structural Properties of Silk Biomaterials Plasticized by Glycerol.

    Science.gov (United States)

    Brown, Joseph E; Davidowski, Stephen K; Xu, Dian; Cebe, Peggy; Onofrei, David; Holland, Gregory P; Kaplan, David L

    2016-12-12

    The molecular interactions of silk materials plasticized using glycerol were studied, as these materials provide options for biodegradable and flexible protein-based systems. Plasticizer interactions with silk were analyzed by thermal, spectroscopic, and solid-state NMR analyses. Spectroscopic analysis implied that glycerol was hydrogen bonded to the peptide matrix, but may be displaced with polar solvents. Solid-state NMR indicated that glycerol induced β-sheet formation in the dried silk materials, but not to the extent of methanol treatment. Fast scanning calorimetry suggested that β-sheet crystal formation in silk-glycerol films appeared to be less organized than in the methanol treated silk films. We propose that glycerol may be simultaneously inducing and interfering with β-sheet formation in silk materials, causing some improper folding that results in less-organized silk II structures even after the glycerol is removed. This difference, along with trace residual glycerol, allows glycerol extracted silk materials to retain more flexibility than methanol processed versions.

  5. Thermal properties of explosives. Quarterly report, January, February, March 1964

    Energy Technology Data Exchange (ETDEWEB)

    Myers, L.C.

    1997-09-01

    Henkin`s test data are reported for comparisons of the following: dry-to-moist samples, PBX 9404 in brass and gold-plated blasting caps, Holston HMX with Bridgewater HMX, LX-04-1 and LX-04-1 + Ucon oil, and PETN, LX-04-1 and Extex. The time-to-explosion curves for HMX and PBX 9404 are also given. A description of the pyrolysis apparatus and the method of calibrating the sample temperature to the response of the thermal conductivity detector are reported. The pyrolytic decomposition curves of several standard explosives and six specially prepared HMX samples (LRL raw material No. A-311 through A-316) are included. A controlled atmosphere D.T.A. is described and the thermograms of PETN with an atmosphere of air at 85 psi, nitrogen at 85 psi and 200 psi are given. The thermograms indicate that PETN becomes more sensitive as the pressure increases. Chemical reactivity data are reported for Comp B, Comp B-3, Comp C-4, HMX, PBX 9011, PBX 9205, Tetryl and TNT. Also, test results are reported for LX-01-1 and Comp B-3 heated at 150{degrees}C for 22 hours, LX-02-1 heated at 100{degrees}C for 22 hours, and pressed pellets of PBX 9404 and PBX 9404 + powdered lead.

  6. Thermal properties of D0 Run IIb silicon detector staves

    Energy Technology Data Exchange (ETDEWEB)

    Lanfranco, Giobatta; Fast, James; /Fermilab

    2001-06-01

    A proposed stave design for the D0 Run IIb silicon tracker outer layers featuring central cooling channels and hybrid substrates mounted directly to the silicon sensor surfaces is evaluated for heat transfer characteristics and thermal deflections. In order to control leakage current noise in the silicon it is necessary to maintain the silicon in Layer 2 (R {approx} 100mm) at or below +5C. The current cooling system using 30% ethylene glycol in water can deliver coolant to the inlet of the silicon tracker at a temperature of -8C to -10C. This paper also investigates some alternative coolant options for Run IIB. While these are not required for the outer layers of silicon, they may be needed for L0, which sits at R {approx} 15mm. In this case the silicon must be kept at or below -5C, very near the lower limit for delivery of 30% glycol/water coolant. However, for the inner layers the electronics will be mounted independently from the silicon so the local heat flux is greatly reduced. This paper does not consider the cooling issues for the inner layers.

  7. Study of Thermal Treatment on Properties of Polycrystalline Silicon

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of thermal annealing on oxygen behavior and carrier lifetimes of mc-Si wafers were investigated by means of FTIR and QSSPCD during single step and two step heat treatments in N2 and O2 ambient. It reveals that interstitial oxygen concentration of mc-Si and CZ-Si has a slighter decrease in N2 and O2 ambient during single-step annealing, which means oxygen precipitates are not generated. But oxygen concentration greatly decreases and generates a number of oxygen precipitates during two-step annealing. Bulk lifetime of mc-Si increases in N2 ambient at 850, 950, 1150 ℃ respectively, and annealing in O2 shows better results than that in N2 and annealing in two-step reflected better consequence than annealing in single-step. But lifetime of CZ-Si annealed in N2 or O2 decreases rapidly. The reason of lifetime increase is probably considered due to the fact that interstitial Si atoms of Si/SiO2 interface fill vacancies or some recombination centers at high temperature annealing. Moreover, a number of impurities in mc-Si probably diffuse to grain boundaries so that greatly reduce recombination centers result to lifetime rising.

  8. Microstructure and properties of sputtered thermal barrier coatings

    Institute of Scientific and Technical Information of China (English)

    Yang Gao; Lun Xie; Feng Pan; Mengcheng Chen

    2004-01-01

    A 3 kW radio frequency (RF) magnetron-sputtering unit was used to produce zirconia ceramic coatings on hollow turbine blades and vanes, which had been deposited a NiCrAlY bond coat layer by cathodic arc deposition. The NiCrAlY coating surface was shot-peened, and the residual stress in the bond coat layer and the effects of heat treatment on the residual stress are presented.After shot peening porosities and microgaps disappear in the NiCrAlY bond coat, the whole depth profile is residual compressive stress. Coarseness tests show that the roughness value (Rz) decreases from 16.4 to 3.3 μm. The microstructure and phase composition of the coatings were investigated using electron probe microanalysis (EPMA) and X-ray diffraction (XRD). The results show that the NiCrAlY bond coat is composed of γ' and Cr phases, and the Al2O3 scales are formed near the interface between the ZrO2 ceramic layer and the NiCrAlY bond coat. No degradation occurred to RF sputtered ceramic coatings after oxidating at 1150℃ for 100 h,heating at 1150℃ for 5 min and then air-cooling for 500 thermal cycles.

  9. Crystallization and thermal properties of Polylactide/Palygorskite composites

    CSIR Research Space (South Africa)

    Kesavan Pillai, Sreejarani

    2014-06-01

    Full Text Available properties, clay John Wiley & Sons, Inc. Journal of Applied Polymer Science For Peer Review 808x381mm (120 x 120 DPI) Page 1 of 34 John Wiley & Sons, Inc. Journal of Applied Polymer Science For Peer Review Table 1 Films Tg/°C Tc/°C ∆Hm.../Paly (2 wt.%) composite. This decrease in Tcc is an indication of faster crystallization of PLA under the influence of Paly nanoparticles. Sabzi et al.40 recently reported similar results on PLA/ sepiolite composites and found that sepiolite...

  10. Ab initio study of structural, electronic, and thermal properties of Ir1-xRhx alloys

    Directory of Open Access Journals (Sweden)

    Sh. Ahmed

    2015-06-01

    Full Text Available The structural, electronic, mechanical and thermal properties of Ir1-xRhx alloys was studied systematically using ab initio density functional theory at different concentration (x = 0.00, 0.25, 0.50, 0.75, 1.00. The Special Quasirandom Structure method was used to make the alloys with FCC structure with four atoms per unit cell. The ground state properties such as lattice constant and bulk modulus were calculated to find the equilibrium atomic position for stable alloys. The calculated ground state properties are in good agreement with the experimental and previously presented other theoretical data. The electronic band structure and density of states were calculated to study the electronic properties for these alloys at different concentration. The electronic properties substantiate metallic behavior of alloys. The first principle density functional perturbation theory as implemented in quasiharmonic approximation was used for the calculation of thermal properties. We have calculated the thermal properties such the Debye temperatures, vibration energy, entropy, constant-volume specific heat and internal energy. The ab initio linear-response method was used for phonon densities of states calculations.

  11. Changes in physical properties of graphene oxide with thermal reduction

    Science.gov (United States)

    Pandit, Bhishma; Jo, Chang Hee; Joo, Kwan Seon; Cho, Jaehee

    2017-08-01

    Reduced graphene oxide (rGO) has attracted significant attention as an easily fabricable twodimensional material. Depending on the oxygen-containing functional groups (OFGs) in an rGO specimen, the optical and electrical properties can vary significantly, directly affecting the performance of devices in which rGO is implemented. Here, we investigated the optical and electrical properties of GO treated with various annealing (reduction) temperatures from 350 to 950 °C in H2 ambient. Using diverse characteristic tools, we found that the transmittance, nanoscale domain size, OFGs in GO and rGO, and Schottky barrier height (SBH) measured on n-type GaN are significantly influenced by the annealing temperature. The relative intensity of the defect-induced band in Raman spectroscopy showed a minimum at the annealing temperature of approximately 350 °C, before the OFGs in rGO showed vigorous changes in relative content. When the domain size of rGO reached a minimum at the annealing temperature of 650 °C, the SBH of rGO/GaN showed the maximum value of 1.07 eV.

  12. Effects of substrate properties on the hydraulic and thermal behavior of a green roof

    Science.gov (United States)

    Sandoval, V. P.; Suarez, F. I.; Victorero, F.; Bonilla, C.; Gironas, J. A.; Vera, S.; Bustamante, W.; Rojas, V.; Pasten, P.

    2014-12-01

    Green roofs are a sustainable urban development solution that incorporates a growing media (also known as substrate) and vegetation into infrastructures to reach additional benefits such as the reduction of: rooftop runoff peak flows, roof surface temperatures, energy utilized for cooling/heating buildings, and the heat island effect. The substrate is a key component of the green roof that allows achieving these benefits. It is an artificial soil that has an improved behavior compared to natural soils, facilitating vegetation growth, water storage and typically with smaller densities to reduce the loads over the structures. Therefore, it is important to study the effects of substrate properties on green roof performance. The objective of this study is to investigate the physical properties of four substrates designed to improve the behavior of a green roof, and to study their impact on the efficiency of a green roof. The substrates that were investigated are: organic soil; crushed bricks; a mixture of mineral soil with perlite; and a mixture of crushed bricks and organic soil. The thermal properties (thermal conductivity, volumetric heat capacity and thermal diffusivity) were measured using a dual needle probe (Decagon Devices, Inc.) at different saturation levels, and the hydraulic properties were measured with a constant head permeameter (hydraulic conductivity) and a pressure plate extractor (water retention curve). This characterization, combined with numerical models, allows understanding the effect of these properties on the hydraulic and thermal behavior of a green roof. Results show that substrates composed by crushed bricks improve the thermal insulation of infrastructures and at the same time, retain more water in their pores. Simulation results also show that the hydraulic and thermal behavior of a green roof strongly depends on the moisture content prior to a rainstorm.

  13. Mechanical and thermal properties of irradiated films based on Tilapia (Oreochromis niloticus) proteins

    Energy Technology Data Exchange (ETDEWEB)

    Sabato, S.F. [Radiation Technology Center, IPEN-CNEN/SP, Av. Lineu Prestes 2242, 05508 900 Sao Paulo, SP (Brazil)], E-mail: sfsabato@ipen.br; Nakamurakare, N.; Sobral, P.J.A. [Food Engineering Department, ZEA/FZEA/USP, Av. Duque de Caxias Norte 225, 13635 900 Pirassununga, SP (Brazil)

    2007-11-15

    Proteins are considered potential material in natural films as alternative to traditional packaging. When gamma radiation is applied to protein film forming solution it resulted in an improvement in mechanical properties of whey protein films. The objective of this work was the characterization of mechanical and thermal properties of irradiated films based on muscle proteins from Nile Tilapia (Oreochromis niloticus). The films were prepared according to a casting technique with two levels of plasticizer: 25% and 45% glycerol and irradiated in electron accelerator type Radiation Dynamics, 0.550 MeV at dose range from 0 to 200 kGy. Thermal properties and mechanical properties were determined using a differential scanning calorimeter and a texture analyzer, respectively. Radiation from electron beam caused a slightly increase on its tensile strength characteristic at 100 kGy, while elongation value at this dose had no reduction.

  14. Effect of low-temperature plasma treatment on tailorability and thermal properties of wool fabrics

    Indian Academy of Sciences (India)

    V S Goud; J S Udakhe

    2011-10-01

    Dielectric barrier discharge type of plasma reactor was used for the low-temperature plasma (LTP) treatment of the wool fabrics. Air was used as the non-polymerizing gas for the plasma treatment at different time intervals. Low-stress mechanical properties of the treated and untreated wool fabrics were evaluated using Siro-fast technique which revealed that the tensile, bending, compression, shear, dimensional stability and surface properties were altered after the LTP treatment. Other properties such as thermal conductivity, thermal resistance and pilling propensity were also evaluated. The surface topographical changes of the wool fibres after LTP treatment were analysed by scanning electron microscopy. The changes in these properties are supposed to be related closely to the interfibre and interyarn frictional force and increased surface area of the fibres induced by the etching effect of plasma.

  15. A review of recent measurements of optical and thermal properties of. alpha. -mercuric iodide

    Energy Technology Data Exchange (ETDEWEB)

    Burger, A.; Morgan, S.H.; Silberman, E. (Fisk Univ., Nashville, TN (United States). Dept. of Physics); Nason, D.; Cheng, A.Y. (EG and G Energy Measurements, Inc., Goleta, CA (United States). Santa Barbara Operations)

    1991-01-01

    The knowledge of the physical properties of a crystal and their relation to the nature and content of defects are essential for both applications and fundamental reasons. Alpha-mercuric iodide ({alpha}-HgI{sub 2}) is a material which was found important applications as room temperature X-ray and gamma ray detectors. Some recent thermal and optical measurements of this material, using the samples of improved crystallinity which are now available, are reviewed below. Heretofore, these properties have received less attention than the mechanical and electrical properties, particularly at elevated temperatures. In the technology of {alpha}-HgI{sub 2} where there is a continuing motivation to obtain larger single crystals without compromising the material quality, a better knowledge of the thermal and optical properties may lead to improvements in the processes of material purification, crystal growth and device fabrication.

  16. Mechanical and thermal properties of irradiated films based on Tilapia ( Oreochromis niloticus) proteins

    Science.gov (United States)

    Sabato, S. F.; Nakamurakare, N.; Sobral, P. J. A.

    2007-11-01

    Proteins are considered potential material in natural films as alternative to traditional packaging. When gamma radiation is applied to protein film forming solution it resulted in an improvement in mechanical properties of whey protein films. The objective of this work was the characterization of mechanical and thermal properties of irradiated films based on muscle proteins from Nile Tilapia ( Oreochromis niloticus). The films were prepared according to a casting technique with two levels of plasticizer: 25% and 45% glycerol and irradiated in electron accelerator type Radiation Dynamics, 0.550 MeV at dose range from 0 to 200 kGy. Thermal properties and mechanical properties were determined using a differential scanning calorimeter and a texture analyzer, respectively. Radiation from electron beam caused a slightly increase on its tensile strength characteristic at 100 kGy, while elongation value at this dose had no reduction.

  17. Thermal Comfort Properties of Clothing Fabrics Woven with Polyester/Cotton Blend Yarns

    Directory of Open Access Journals (Sweden)

    Özdemir Hakan

    2017-06-01

    Full Text Available In this research, thermal and water vapor resistance, components of thermal comfort of 65/35 and 33/67% polyester/ cotton (PES/CO blend fabrics woven with 2/2 twill, matt twill, cellular and diced weaves, which are commonly used for clothing, were determined. The results indicate that both the fabric construction and the constituent fiber properties affect thermal comfort properties of clothing woven fabrics. Cellular weave, which is derivative of sateen weave and diced weave, which is compound weave, has the highest thermal resistance appropriating for cold climatic conditions. On the other hand, the 2/2 twill weave and matt twill weave, which is derivative of sateen weave, depicted the lowest water vapor thermal resistance, making it convenient for hot climatic conditions. Besides, fabrics woven with 65/35% PES/CO blend yarns have higher thermal resistance, so they are suitable for cold climatic conditions. Fabrics woven with 33/67% PES/CO blend yarns have lower water vapor resistance, so they are convenient for hot climatic conditions.

  18. Thermal properties measurement of dry bulk materials with a cylindrical three layers device

    Science.gov (United States)

    Jannot, Y.; Degiovanni, A.

    2013-09-01

    This paper presents a new method dedicated to thermal properties (conductivity and diffusivity) measurement of dry bulk materials including powders. The cylindrical three layers experimental device (brass/bulk material/stainless steel) and the principle of the measurement method based on a crenel thermal excitation are presented. The one-dimensional modeling of the system is used for a sensitivity analysis and to calculate the standard deviation of the estimation error. Experimental measurements are carried out on three bulk materials: glass beads, cork granules, and expanded polystyrene beads. The estimated thermal properties are compared with the values obtained by other measurement methods. Results are in good agreement with theoretical predictions: both thermal conductivity and diffusivity can be estimated with a good accuracy for low density material like cork granules or expanded polystyrene beads since only thermal diffusivity can be estimated for heavier materials like glass beads. It is finally shown that this method like all transient methods is not suited to the thermal characterization of wet bulk materials.

  19. Structural, optical, opto-thermal and thermal properties of ZnS–PVA nanofluids synthesized through a radiolytic approach

    Directory of Open Access Journals (Sweden)

    Alireza Kharazmi

    2015-02-01

    Full Text Available This work describes a fast, clean and low-cost approach to synthesize ZnS–PVA nanofluids consisting of ZnS nanoparticles homogeneously distributed in a PVA solution. The ZnS nanoparticles were formed by the electrostatic force between zinc and sulfur ions induced by gamma irradiation at a dose range from 10 to 50 kGy. Several experimental characterizations were conducted to investigate the physical and chemical properties of the samples. Fourier transform infrared spectroscopy (FTIR was used to determine the chemical structure and bonding conditions of the final products, transmission electron microscopy (TEM for determining the shape morphology and average particle size, powder X-ray diffraction (XRD for confirming the formation and crystalline structure of ZnS nanoparticles, UV–visible spectroscopy for measuring the electronic absorption characteristics, transient hot wire (THW and photoacoustic measurements for measuring the thermal conductivity and thermal effusivity of the samples, from which, for the first time, the values of specific heat and thermal diffusivity of the samples were then calculated.

  20. Structural, optical, opto-thermal and thermal properties of ZnS-PVA nanofluids synthesized through a radiolytic approach.

    Science.gov (United States)

    Kharazmi, Alireza; Faraji, Nastaran; Mat Hussin, Roslina; Saion, Elias; Yunus, W Mahmood Mat; Behzad, Kasra

    2015-01-01

    This work describes a fast, clean and low-cost approach to synthesize ZnS-PVA nanofluids consisting of ZnS nanoparticles homogeneously distributed in a PVA solution. The ZnS nanoparticles were formed by the electrostatic force between zinc and sulfur ions induced by gamma irradiation at a dose range from 10 to 50 kGy. Several experimental characterizations were conducted to investigate the physical and chemical properties of the samples. Fourier transform infrared spectroscopy (FTIR) was used to determine the chemical structure and bonding conditions of the final products, transmission electron microscopy (TEM) for determining the shape morphology and average particle size, powder X-ray diffraction (XRD) for confirming the formation and crystalline structure of ZnS nanoparticles, UV-visible spectroscopy for measuring the electronic absorption characteristics, transient hot wire (THW) and photoacoustic measurements for measuring the thermal conductivity and thermal effusivity of the samples, from which, for the first time, the values of specific heat and thermal diffusivity of the samples were then calculated.