WorldWideScience

Sample records for superheated droplet vaporizes

  1. Superheated Droplet Detector Response for Temperature

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Superheated droplet detector has the following advantages: Used repeatedly, recording the cumulative dose, using both indoors and outdoors, compacting; relatively low cost, direct reading of the bubbles using the naked eye, and working in gamma-neutron mixed-field well

  2. a Theoretical Model of a Superheated Liquid Droplet Neutron Detector.

    Science.gov (United States)

    Harper, Mark Joseph

    Neutrons can interact with the atoms in superheated liquid droplets which are suspended in a viscous matrix material, resulting in the formation of charged recoil ions. These ions transfer energy to the liquid, sometimes resulting in the droplets vaporizing and producing observable bubbles. Devices employing this mechanism are known as superheated liquid droplet detectors, or bubble detectors. The basis of bubble detector operation is identical to that of bubble chambers, which have been well characterized by researchers such as Wilson, Glaser, Seitz, and others since the 1950's. Each of the microscopic superheated liquid droplets behaves like an independent bubble chamber. This dissertation presents a theoretical model which considers the three principal aspects of detector operation: nuclear reactions, charged particle energy deposition, and thermodynamic bubble formation. All possible nuclear reactions were examined and those which could reasonably result in recoil ions sufficiently energetic to vaporize a droplet were analyzed in detail. Feasible interactions having adequate cross sections include elastic and inelastic scattering, n-proton, and n-alpha reactions. Ziegler's TRansport of Ions in Matter (TRIM) code was used to calculate the ions' stopping powers in various compounds based on the ionic energies predicted by standard scattering distributions. If the ions deposit enough energy in a small enough volume then the entire droplet will vaporize without further energy input. Various theories as to the vaporization of droplets by ionizing radiation were studied and a novel method of predicting the critical (minimum) energy was developed. This method can be used to calculate the minimum required stopping power for the ion, from which the threshold neutron energy is obtainable. Experimental verification of the model was accomplished by measuring the response of two different types of bubble detectors to monoenergetic thermal neutrons, as well as to neutrons

  3. WIMP searches with superheated droplet detectors Status and Prospects

    CERN Document Server

    Collar, J I; Limagne, D; Miley, H S; Morlat, T; Puibasset, J; Waysand, G

    2001-01-01

    SIMPLE (Superheated Instrument for Massive ParticLE searches) employs superheated droplet detectors (SDDs) to search for Weakly Interacting Massive Particle (WIMP) dark matter. As a result of the intrinsic SDD insensitivity to minimum ionizing particles and high fluorine content of target liquids, competitive WIMP limits were already obtained at the early prototype stage. We comment here on the expected immediate increase in sensitivity of the program and on future plans to exploit this promising technnique.

  4. Acoustic response of superheated droplet detectors to neutrons

    Science.gov (United States)

    Gao, Size; Zhang, Guiying; Ni, Bangfa; Zhao, Changjun; Zhang, Huanqiao; Guan, Yongjing; Chen, Zhe; Xiao, Caijin; Liu, Chao; Liu, Cunxiong

    2012-03-01

    The search for dark matter (DM) is a hot field nowadays, a number of innovative techniques have emerged. The superheated droplet technique is relatively mature; however, it is recently revitalized in a number of frontier fields including the search for DM. In this work, the acoustic response of Superheated Droplet Detectors (SDDs) to neutrons was studied by using a 252Cf neutron source, SDDs developed by the China Institute of Atomic Energy, a sound sensor, a sound card and a PC. Sound signals were filtered. The characteristics of FFT spectra, power spectra and time constants were used to determine the authenticity of the bubbles analyzed.

  5. Sub-micrometer dropwise condensation under superheated and rarefied vapor condition.

    Science.gov (United States)

    Anand, Sushant; Son, Sang Young

    2010-11-16

    Phase change accompanying conversion of a saturated or superheated vapor in the presence of subcooled surfaces is one of the most common occurring phenomena in nature. The mode of phase change that follows such a transformation is dependent upon surface properties such as contact angle and thermodynamic conditions of the system. In present studies, an experimental approach is used to study the physics behind droplet growth on a partially wet surface. Superheated vapor at low pressures of 4-5 Torr was condensed on subcooled silicon surface with a static contact angle of 60° in the absence of noncondensable gases, and the condensation process was monitored using environmental scanning electron microscopy (ESEM) with sub-microscopic spatial resolution. The condensation process was analyzed in the form of size growth of isolated droplets before a coalescence event ended the regime of single droplet growth. Droplet growth obtained as a function of time reveals that the rate of growth decreases as the droplet increases in size. This behavior is indicative of an overall droplet growth law existing over larger time scales for which the current observations in their brief time intervals could be fitted. A theoretical model based on kinetic theory further support the experimental observations indicating a mechanism where growth occurs by interfacial mass transport directly on condensing droplet surface. Evidence was also found that establishes the presence of sub-microscopic droplets nucleating and growing between microscopic droplets for the partially wetting case.

  6. Thermoeconomic optimization of subcooled and superheated vapor compression refrigeration cycle

    Energy Technology Data Exchange (ETDEWEB)

    Selbas, Resat; Kizilkan, OEnder; Sencan, Arzu [Technical Education Faculty, Department of Mechanical Education, Sueleyman Demirel University, Isparta 32260 (Turkey)

    2006-09-15

    An exergy-based thermoeconomic optimization application is applied to a subcooled and superheated vapor compression refrigeration system. The advantage of using the exergy method of thermoeconomic optimization is that various elements of the system - i.e., condenser, evaporator, subcooling and superheating heat exchangers - can be optimized on their own. The application consists of determining the optimum heat exchanger areas with the corresponding optimum subcooling and superheating temperatures. A cost function is specified for the optimum conditions. All calculations are made for three refrigerants: R22, R134a, and R407c. Thermodynamic properties of refrigerants are formulated using the Artificial Neural Network methodology. (author)

  7. Sessile droplet evaporation on superheated superhydrophobic surfaces

    CERN Document Server

    Hays, Robb C; Maynes, Daniel; Webb, Brent W

    2013-01-01

    This fluid dynamics video depicts the evaporation of sessile water droplets placed on heated superhydrophobic (SH) surfaces of varying cavity fraction, F_c, and surface temperature, T_s, above the saturation temperature, T_sat. Images were captured at 10,000 FPS and are played back at 30 FPS in this video. Teflon-coated silicon surfaces of F_c = 0, 0.5, 0.8, and 0.95 were used for these experiments. T_s ranging from 110{\\deg}C to 210{\\deg}C were studied. The video clips show how the boiling behavior of sessile droplets is altered with changes in surface microstructure. Quantitative results from heat transfer rate experiments conducted by the authors are briefly discussed near the end of the video.

  8. Superheated Droplet Detectors as CDM Detectors The SIMPLE Experiment

    CERN Document Server

    Collar, J I; Limagne, D; Waysand, G

    1996-01-01

    Superheated Droplet Detectors (SDDs) are becoming commonplace in neutron personnel dosimetry. Their total insensitivity to minimum ionizing radiation (while responsive to nuclear recoils of energies ~ few keV), together with their low cost, ease of production, and operation at room temperature and 1 atm makes them ideal for Cold Dark Matter (CDM) searches. SDD's are optimal for the exploration of the spin-dependent neutralino coupling due to their high fluorine content. The status of SIMPLE (Superheated Instrument for Massive ParticLe Experiments) is presented. Under realistic background considerations, we expect an improvement in the present Cold Dark Matter sensitivity of 2-3 orders of magnitude after ~1 kg-y of data acquisition.

  9. Study of low frequency acoustic signals from superheated droplet detector

    CERN Document Server

    Mondal, P K; Das, M; Bhattacharjee, P

    2013-01-01

    The bubble nucleation process in superheated droplet detector (SDD) is associated with the emission of an acoustic pulse that can be detected by an acoustic sensor. We have studied the neutron and gamma-ray induced nucleation events in a SDD with the active liquid R-12 (CCl2F2, b.p. -29.8oC) using a condenser microphone sensor. A comparative study in the low frequency region (~ 0-10kHz) for the neutron and gamma-ray induced nucleation is presented here. From the analysis of the waveforms we observe a significant difference between the neutron and gamma-ray induced acoustic events.

  10. Numerical simulation of superheated vapor bubble rising in stagnant liquid

    Science.gov (United States)

    Samkhaniani, N.; Ansari, M. R.

    2017-09-01

    In present study, the rising of superheated vapor bubble in saturated liquid is simulated using volume of fluid method in OpenFOAM cfd package. The surface tension between vapor-liquid phases is considered using continuous surface force method. In order to reduce spurious current near interface, Lafaurie smoothing filter is applied to improve curvature calculation. Phase change is considered using Tanasawa mass transfer model. The variation of saturation temperature in vapor bubble with local pressure is considered with simplified Clausius-Clapeyron relation. The couple velocity-pressure equation is solved using PISO algorithm. The numerical model is validated with: (1) isothermal bubble rising and (2) one-dimensional horizontal film condensation. Then, the shape and life time history of single superheated vapor bubble are investigated. The present numerical study shows vapor bubble in saturated liquid undergoes boiling and condensation. It indicates bubble life time is nearly linear proportional with bubble size and superheat temperature.

  11. Droplet impact on superheated micro-structured surfaces

    NARCIS (Netherlands)

    Tran, A.T.; Staat, H.J.J.; Susarrey-Arce, A.; Foertsch, T.C.; Houselt, van A.; Gardeniers, J.G.E.; Prosperetti, A.; Lohse, D.; Sun, C.

    2013-01-01

    When a droplet impacts upon a surface heated above the liquid's boiling point, the droplet either comes into contact with the surface and boils immediately (contact boiling), or is supported by a developing vapor layer and bounces back (film boiling, or Leidenfrost state). We study the transition be

  12. Characterization of R-134A superheated droplet detector for neutron detection

    CERN Document Server

    Mondal, Prasanna Kumar; Chatterjee, Barun Kumar

    2013-01-01

    R-134A (C2H2F4) is a low cost, easily available and chlorine free refrigerant, which in its superheated state can be used as an efficient neutron detector. Due to its high solubility in water the R-134A based superheated droplet detectors (SDD) are usually very unstable unless the detector is fabricated using a suitable additive, which stabilizes the detector. The SDD is known to have superheated droplets distributed in a short-lived and in a relatively longer-lived metastable state. We have studied the detector response to neutrons using a 241AmBe neutron source and obtained the temperature variation of the nucleation parameters and the interstate kinetics of these droplets using a two-state model.

  13. Ultra Low Level Environmental Neutron Measurements Using Superheated Droplet Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, A.C. [Centro de Ciencias e Tecnologias Nucleares, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Estrada Nacional 10 - km 139.7, 2695-066 Bobadela LRS (Portugal); Centro de Fisica Nuclear, Universidade de Lisboa. Av. Prof. Gama Pinto, 2, 1649- 003 Lisboa (Portugal); Felizardo, M.; Girard, T.A.; Kling, A.; Ramos, A.R. [Centro de Fisica Nuclear, Universidade de Lisboa. Av. Prof. Gama Pinto, 2, 1649- 003 Lisboa (Portugal); Marques, J.G.; Prudencio, M.I.; Marques, R.; Carvalho, F.P. [Centro de Ciencias e Tecnologias Nucleares, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Estrada Nacional 10 - km 139.7, 2695-066 Bobadela LRS (Portugal)

    2015-07-01

    Through the application of superheated droplet detectors (SDDs), the SIMPLE project for the direct search for dark matter (DM) reached the most restrictive limits on the spin-dependent sector to date. The experiment is based on the detection of recoils following WIMP-nuclei interaction, mimicking those from neutron scattering. The thermodynamic operation conditions yield the SDDs intrinsically insensitive to radiations with linear energy transfer below ∼150 keVμm{sup -1} such as photons, electrons, muons and neutrons with energies below ∼40 keV. Underground facilities are increasingly employed for measurements in a low-level radiation background (DM search, gamma-spectroscopy, intrinsic soft-error rate measurements, etc.), where the rock overburden shields against cosmic radiation. In this environment the SDDs are sensitive only to α-particles and neutrons naturally emitted from the surrounding materials. Recently developed signal analysis techniques allow discrimination between neutron and α-induced signals. SDDs are therefore a promising instrument for low-level neutron and α measurements, namely environmental neutron measurements and α-contamination assays. In this work neutron measurements performed in the challenging conditions of the latest SIMPLE experiment (1500 mwe depth with 50-75 cm water shield) are reported. The results are compared with those obtained by detailed Monte Carlo simulations of the neutron background induced by {sup 238}U and {sup 232}Th traces in the facility, shielding and detector materials. Calculations of the neutron energy distribution yield the following neutron fluence rates (in 10{sup -8} cm{sup -2}s{sup -1}): thermal (<0.5 eV): 2.5; epithermal (0.5 eV-100 keV): 2.2; fast (>1 MeV): 3.9. Signal rates were derived using standard cross sections and codes routinely employed in reactor dosimetry. The measured and calculated neutron count rates per unit of active mass were 0.15 ct/kgd and 0.33 ct/kg-d respectively. As the major

  14. Study of acoustic emission due to vaporisation of superheated droplets at higher pressure

    Science.gov (United States)

    Sarkar, Rupa; Mondal, Prasanna Kumar; Chatterjee, Barun Kumar

    2017-08-01

    Bubble nucleation in superheated liquids can be controlled by adjusting the ambient pressure and temperature. At higher pressure the threshold energy for bubble nucleation increases, and we have observed that the amplitude of the acoustic emission during vaporisation of superheated droplet decreases with increase in pressure at any given temperature. Other acoustic parameters such as the primary harmonic frequency and the decay time constant of the acoustic signal also decrease with increase in pressure. This behavior is independent of the type of superheated liquid. The decrease in signal amplitude limits the detection of bubble nucleation at higher pressure. This effect is explained by the emission of shockwave generated during the supersonic growth of the microbubble in superheated liquids.

  15. Development of a Parching Machine Using Super-Heated Vapor or Super-Heated High-Moisture Atmosphere

    Science.gov (United States)

    Sato, Shoichi; Shinsho, Seiji; Iriki, Hiroyuki; Asai, Junya; Suganuma, Hirofumi; Shibata, Tsutomu

    We developed a new parching machine with super-heated vapor or super-heated highmoisture atmosphere as a heat medium, and investigated the influence exerted on the characteristics of manufactured tea and crude tea quality. (1)We developed machine specifications that improved throughput and allowed us to control stable quality compared with the conventional kamairicha parching machine. (2)The new parching machine could not only manufacture like kamairicha but also achieve various degrees of steaming of products like green tea or heavily steamed sencha. (3)The new parching machine could not only deactivate enzymes but dry leaves. (4)The influence of throughput was great with respect to the grade of pan-parched flavour, which meant that there was a contact opportunity for tea leaves and the surface of machine's wall. (5)Unpleasant smells such as that produced in a summer crop of tea were reduced by the new parching machine.

  16. Acoustic Droplet Vaporization in Biology and Medicine

    Directory of Open Access Journals (Sweden)

    Chung-Yin Lin

    2013-01-01

    Full Text Available This paper reviews the literature regarding the use of acoustic droplet vaporization (ADV in clinical applications of imaging, embolic therapy, and therapeutic delivery. ADV is a physical process in which the pressure waves of ultrasound induce a phase transition that causes superheated liquid nanodroplets to form gas bubbles. The bubbles provide ultrasonic imaging contrast and other functions. ADV of perfluoropentane was used extensively in imaging for preclinical trials in the 1990s, but its use declined rapidly with the advent of other imaging agents. In the last decade, ADV was proposed and explored for embolic occlusion therapy, drug delivery, aberration correction, and high intensity focused ultrasound (HIFU sensitization. Vessel occlusion via ADV has been explored in rodents and dogs and may be approaching clinical use. ADV for drug delivery is still in preclinical stages with initial applications to treat tumors in mice. Other techniques are still in preclinical studies but have potential for clinical use in specialty applications. Overall, ADV has a bright future in clinical application because the small size of nanodroplets greatly reduces the rate of clearance compared to larger contrast agent bubbles and yet provides the advantages of ultrasonographic contrast, acoustic cavitation, and nontoxicity of conventional perfluorocarbon contrast agent bubbles.

  17. Reduction in the Vapor Pressure in Condensation on Cold Droplets of a Liquid

    Science.gov (United States)

    Bochkareva, E. M.; Nemtsev, V. A.; Sorokin, V. V.; Terekhov, V. V.; Terekhov, V. I.

    2016-05-01

    A physicomathematical model of the process of depressurization in a pure saturated and superheated vapor due to the injection of monodisperse cold droplets of a liquid has been developed. A cellular model has been developed that is based on solving the equation of heat conduction in a liquid phase and on the integral method for a gas phase in a spherically symmetric one-dimensional formulation. Numerical investigation has been carried out of the influence of the size and concentration of the droplets and of the initial parameters of the steam on the dynamics of depressurization during the vapor condensation on the droplets.

  18. Nonlinear dynamics of a vapor bubble expanding in a superheated region of finite size

    Science.gov (United States)

    Annenkova, E. A.; Kreider, W.; Sapozhnikov, O. A.

    2015-10-01

    Growth of a vapor bubble in a superheated liquid is studied theoretically. Contrary to the typical situation of boiling, when bubbles grow in a uniformly heated liquid, here the superheated region is considered in the form of a millimeter-sized spherical hot spot. An initial micron-sized bubble is positioned at the hot spot center and a theoretical model is developed that is capable of studying bubble growth caused by vapor pressure inside the bubble and corresponding hydrodynamic and thermal processes in the surrounding liquid. Such a situation is relevant to the dynamics of vapor cavities that are created in soft biological tissue in the focal region of a high-intensity focused ultrasound beam with a shocked pressure waveform. Such beams are used in the recently proposed treatment called boiling histotripsy. Knowing the typical behavior of vapor cavities during boiling histotripsy could help to optimize the therapeutic procedure.

  19. Nonlinear dynamics of a vapor bubble expanding in a superheated region of finite size

    Energy Technology Data Exchange (ETDEWEB)

    Annenkova, E. A., E-mail: a-a-annenkova@yandex.ru [Physics Faculty, Moscow State University, Leninskie Gory, 119991 Moscow (Russian Federation); Kreider, W. [Center for Industrial and Medical Ultrasound, Applied Physics Laboratory, University of Washington, 1013 NE 40th St., Seattle, WA 98105 (United States); Sapozhnikov, O. A. [Physics Faculty, Moscow State University, Leninskie Gory, 119991 Moscow (Russian Federation); Center for Industrial and Medical Ultrasound, Applied Physics Laboratory, University of Washington, 1013 NE 40th St., Seattle, WA 98105 (United States)

    2015-10-28

    Growth of a vapor bubble in a superheated liquid is studied theoretically. Contrary to the typical situation of boiling, when bubbles grow in a uniformly heated liquid, here the superheated region is considered in the form of a millimeter-sized spherical hot spot. An initial micron-sized bubble is positioned at the hot spot center and a theoretical model is developed that is capable of studying bubble growth caused by vapor pressure inside the bubble and corresponding hydrodynamic and thermal processes in the surrounding liquid. Such a situation is relevant to the dynamics of vapor cavities that are created in soft biological tissue in the focal region of a high-intensity focused ultrasound beam with a shocked pressure waveform. Such beams are used in the recently proposed treatment called boiling histotripsy. Knowing the typical behavior of vapor cavities during boiling histotripsy could help to optimize the therapeutic procedure.

  20. First Dark Matter Limits from a Large-Mass, Low-Background Superheated Droplet Detector

    CERN Document Server

    Collar, J.I.; Girard, T.A.; Limagne, D.; Miley, H.S.; Waysand, G.

    2000-01-01

    We report on the fabrication aspects and calibration of the first large active mass ($\\sim15$ g) modules of SIMPLE, a search for particle dark matter using Superheated Droplet Detectors (SDDs). While still limited by the statistical uncertainty of the small data sample on hand, the first weeks of operation in the new underground laboratory of Rustrel-Pays d'Apt already provide a sensitivity to axially-coupled Weakly Interacting Massive Particles (WIMPs) competitive with leading experiments, confirming SDDs as a convenient, low-cost alternative for WIMP detection.

  1. Machine Learning Method Applied in Readout System of Superheated Droplet Detector

    Science.gov (United States)

    Liu, Yi; Sullivan, Clair Julia; d'Errico, Francesco

    2017-07-01

    Direct readability is one advantage of superheated droplet detectors in neutron dosimetry. Utilizing such a distinct characteristic, an imaging readout system analyzes image of the detector for neutron dose readout. To improve the accuracy and precision of algorithms in the imaging readout system, machine learning algorithms were developed. Deep learning neural network and support vector machine algorithms are applied and compared with generally used Hough transform and curvature analysis methods. The machine learning methods showed a much higher accuracy and better precision in recognizing circular gas bubbles.

  2. Generalized computer algorithms for enthalpy, entropy and specific heat of superheated vapors

    Science.gov (United States)

    Cowden, Michael W.; Scaringe, Robert P.; Gebre-Amlak, Yonas D.

    This paper presents an innovative technique for the development of enthalpy, entropy, and specific heat correlations in the superheated vapor region. The method results in a prediction error of less than 5 percent and requires the storage of 39 constants for each fluid. These correlations are obtained by using the Beattie-Bridgeman equation of state and a least-squares regression for the coefficients involved.

  3. Intrinsic noise of a superheated droplet detector for neutron background measurements in massively shielded facilities

    Science.gov (United States)

    Fernandes, Ana C.; Morlat, Tomoko A.; Felizardo, Miguel; Kling, Andreas; Marques, José G.; Prudêncio, Maria I.; Marques, Rosa; Carvalho, Fernando P.; Roche, Ignácio Lázaro; Girard, Thomas A.

    2017-09-01

    Superheated droplet detectors are a promising technique to the measurement of low-intensity neutron fields, as detectors can be rendered insensitive to minimum ionizing radiations. We report on the intrinsic neutron-induced signal of C2ClF5 devices fabricated by our group that originate from neutron- and alpha-emitting impurities in the detector constituents. The neutron background was calculated via Monte Carlo simulations using the MCNPX-PoliMi code in order to extract the recoil distributions following neutron interaction with the atoms of the superheated liquid. Various nuclear techniques were employed to characterise the detector materials with respect to source isotopes (238U, 232Th and 147Sm) for the normalisation of the simulations and also light elements (B, Li) having high (α, n) neutron production yields. We derived a background signal of 10-3 cts/day in a 1 liter detector of 1-3 wt.% C2ClF5, corresponding to a detection limit in the order of 10-8 n cm-2s-1. Direct measurements in a massively shielded underground facility for dark matter search have confirmed this result. With the borosilicate detector containers found to be the dominant background source in current detectors, possibilities for further noise reduction by 2 orders of magnitude based on selected container materials are discussed.

  4. Bioeffects due to acoustic droplet vaporization

    Science.gov (United States)

    Bull, Joseph

    2015-11-01

    Encapsulated micro- and nano-droplets can be vaporized via ultrasound, a process termed acoustic droplet vaporization. Our interest is primarily motivated by a developmental gas embolotherapy technique for cancer treatment. In this methodology, infarction of tumors is induced by selectively formed vascular gas bubbles that arise from the acoustic vaporization of vascular microdroplets. Additionally, the microdroplets may be used as vehicles for localized drug delivery, with or without flow occlusion. In this talk, we examine the dynamics of acoustic droplet vaporization through experiments and theoretical/computational fluid mechanics models, and investigate the bioeffects of acoustic droplet vaporization on endothelial cells and in vivo. Early timescale vaporization events, including phase change, are directly visualized using ultra-high speed imaging, and the influence of acoustic parameters on droplet/bubble dynamics is discussed. Acoustic and fluid mechanics parameters affecting the severity of endothelial cell bioeffects are explored. These findings suggest parameter spaces for which bioeffects may be reduced or enhanced, depending on the objective of the therapy. This work was supported by NIH grant R01EB006476.

  5. Searching for universal behaviour in superheated droplet detector with effective recoil nuclei

    Indian Academy of Sciences (India)

    Mala Das; Susnata Seth

    2013-06-01

    Energy calibration of superheated droplet detector is discussed in terms of the effective recoil nucleus threshold energy and the reduced superheat. This provides a universal energy calibration curve valid for different liquids used in this type of detector. Two widely used liquids, R114 and C4F10, one for neutron detection and the other for weakly interacting massive particles (WIMPs) dark matter search experiment, have been compared. Liquid having recoil nuclei with larger values of linear energy transfer (LET) provides better neutron- discrimination. Gamma () response of C4F10 has also been studied and the results are discussed. Behaviour of nucleation parameter with the effective recoil nucleus threshold energy and the reduced superheat have been explored.

  6. Laminar film condensation from downward flowing superheated vapors onto a non-isothermal sphere

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, C.H. [Dept. of Mold and Die Engineering, National Kaohsiung Univ. of Applied Sciences, Kaohsiung (Taiwan)

    2001-11-01

    A model is developed for the study of mixed convection film condensation from downward flowing superheated vapors onto a sphere with variable wall temperature. The model combined natural convection dominated and forced convection dominated film condensation, including effects of superheated vapor, pressure gradient and wall temperature variation can be solved numerically by the fourth-order Runge-Kutta technique. By the present numerical approach, the mean heat transfer is evaluated up to the critical angle of the condensate layer, {phi}{sub c}. In general, the result of mean heat transfer shows that, as A, the wall-temperature amplitude, increases, the value of NuRe{sup -1/2} with inclusion of P, the pressure gradient effect, goes down slightly, however, the value of NuRe{sup -1/2} with the pressure gradient effect ignored will remain almost uniform. Further, for P=2.0, the mean heat transfer coefficient increases significantly, by 8.6-23.9%, depending on A, as the superheat parameter, Sp, increases within a practical range. (orig.)

  7. Study of gamma ray response of R404A superheated droplet detector using a two-state model

    CERN Document Server

    Mondal, P K

    2013-01-01

    The superheated droplet detector (SDD) is known to be gamma insensitive below a threshold temperature which made them excellent candidates for neutron detection in the presence of gamma rays. Above the threshold temperature, the gamma ray detection efficiency increases with increase in temperature. In this work the gamma ray threshold temperature has been studied for SDD using R404A as the active liquid and is compared to the theoretical prediction. The temperature variation of gamma ray detection efficiency and interstate transition kinetics has also been studied using a two-state model. The experiments are performed at the ambient pressure of 1 atmosphere and in the temperature range of 17-32oC using a 662 keV 137Cs gamma ray source.

  8. Dynamic response of vaporizing droplet to pressure oscillation

    Science.gov (United States)

    Yuan, Lei; Shen, Chibing; Zhang, Xinqiao

    2017-02-01

    Combustion instability is a major challenge in the development of the liquid propellant engines, and droplet vaporization is viewed as a potential mechanism for driving instabilities. Based on the previous work, an unsteady droplet heating and vaporization model was developed. The model and numerical method are validated by experimental data available in literature, and then the oscillatory vaporization of n-Heptane droplet exposed to unsteady harmonic nitrogen atmosphere was numerically investigated over a wide range of amplitudes and frequencies. Also, temperature variations inside the droplet were demonstrated under oscillation environments. It was found that the thermal wave is attenuated with significantly reduced wave intensities as it penetrates deep into droplet from the ambient gas. Droplet surface temperature exhibits smaller fluctuation than that of the ambient gas, and it exhibits a time lag with regard to the pressure variation. Furthermore, the mechanism leading to phase lag of vaporization rate with respect to pressure oscillation was unraveled. Results show that this phase lag varies during the droplet lifetime and it is strongly influenced by oscillation frequency, indicating droplet vaporization is only capable of driving combustion instability in some certain frequency domains. Instead, the amplitude of the oscillation does not have very significant effects. It is noteworthy that thermal inertia of the droplet also plays a considerable role in determining the phase lag.

  9. On the acoustic properties of vaporized submicron perfluorocarbon droplets.

    Science.gov (United States)

    Reznik, Nikita; Lajoinie, Guillaume; Shpak, Oleksandr; Gelderblom, Erik C; Williams, Ross; de Jong, Nico; Versluis, Michel; Burns, Peter N

    2014-06-01

    The acoustic characteristics of microbubbles created from vaporized submicron perfluorocarbon droplets with fluorosurfactant coating are examined. Utilizing ultra-high-speed optical imaging, the acoustic response of individual microbubbles to low-intensity diagnostic ultrasound was observed on clinically relevant time scales of hundreds of milliseconds after vaporization. It was found that the vaporized droplets oscillate non-linearly and exhibit a resonant bubble size shift and increased damping relative to uncoated gas bubbles due to the presence of coating material. Unlike the commercially available lipid-coated ultrasound contrast agents, which may exhibit compression-only behavior, vaporized droplets may exhibit expansion-dominated oscillations. It was further observed that the non-linearity of the acoustic response of the bubbles was comparable to that of SonoVue microbubbles. These results suggest that vaporized submicron perfluorocarbon droplets possess the acoustic characteristics necessary for their potential use as ultrasound contrast agents in clinical practice.

  10. On the Acoustic Properties of Vaporized Submicron Perfluorocarbon Droplets

    NARCIS (Netherlands)

    Reznik, Nikita; Lajoinie, Guillaume; Shpak, Oleksandr; Gelderblom, Erik C.; Williams, Ross; Jong, de Nico; Versluis, Michel; Burns, Peter N.

    2014-01-01

    The acoustic characteristics of microbubbles created from vaporized submicron perfluorocarbon droplets with fluorosurfactant coating are examined. Utilizing ultra-high-speed optical imaging, the acoustic response of individual microbubbles to low-intensity diagnostic ultrasound was observed on clini

  11. Characterization of Bioeffects on Endothelial Cells under Acoustic Droplet Vaporization.

    Science.gov (United States)

    Seda, Robinson; Li, David S; Fowlkes, J Brian; Bull, Joseph L

    2015-12-01

    Gas embolotherapy is achieved by locally vaporizing microdroplets through acoustic droplet vaporization, which results in bubbles that are large enough to occlude blood flow directed to tumors. Endothelial cells, lining blood vessels, can be affected by these vaporization events, resulting in cell injury and cell death. An idealized monolayer of endothelial cells was subjected to acoustic droplet vaporization using a 3.5-MHz transducer and dodecafluoropentane droplets. Treatments included insonation pressures that varied from 2 to 8 MPa (rarefactional) and pulse lengths that varied from 4 to 16 input cycles. The bubble cloud generated was directly dependent on pressure, but not on pulse length. Cellular damage increased with increasing bubble cloud size, but was limited to the bubble cloud area. These results suggest that vaporization near the endothelium may impact the vessel wall, an effect that could be either deleterious or beneficial depending on the intended overall therapeutic application.

  12. Investigating the Droplet Formation in a Nucleonic Vapor

    CERN Document Server

    Ogul, R

    2003-01-01

    The droplet formation in a supersaturated vapor which may occur during the expansion of an excited blob of nuclear matter in the metastable region at subnuclear densities is investigated. The free energy change accompanying the formation of a drop is calculated as a function of droplet radius for various saturation ratios on the basis of Fisher's model. The results are related to the experimental data

  13. Asymptotic approach in the limit of small contact angles to sessile vapor bubble growth in a superheated environment

    Science.gov (United States)

    Rednikov, Alexey; Hollander, Nicolas; Hernando Revilla, Marta; Colinet, Pierre

    2014-11-01

    A model of nucleate pool boiling is considered, and more concretely the growth dynamics of a single spherical-cap vapor bubble on a flat superheated substrate in a large volume of an equally superheated liquid. An asymptotic scheme is developed valid in the limit of small contact angles. These are basically supposed to be the evaporation-induced ones and hence finite even in the case of a perfectly wetting liquid implied here. The consideration generally involves four regions: i) microregion, where the contact line singularities are resolved and the evaporation-induced contact angles are established, ii) Cox-Voinov region, iii) foot of the bubble, and iv) macroregion. It is only in the latter region, which remarkably appears to leading order in the form of the exterior of a sphere touching a planar surface in one point (hence a fixed geometry even for variable contact angles), that the full Navier-Stokes and heat equations are to be (numerically) resolved. ESA & BELSPO PRODEX, F.R.S.-FNRS.

  14. Optical droplet vaporization of micron-sized perfluorocarbon droplets and their photoacoustic detection

    Science.gov (United States)

    Strohm, Eric; Rui, Min; Gorelikov, Ivan; Matsuura, Naomi; Kolios, Michael

    2011-03-01

    An acoustic and photoacoustic characterization of micron-sized perfluorocarbon (PFC) droplets is presented. PFC droplets are currently being investigated as acoustic and photoacoustic contrast agents and as cancer therapy agents. Pulse echo measurements at 375 MHz were used to determine the diameter, ranging from 3.2 to 6.5 μm, and the sound velocity, ranging from 311 to 406 m/s of nine droplets. An average sound velocity of 379 +/- 18 m/s was calculated for droplets larger than the ultrasound beam width of 4.0 μm. Optical droplet vaporization, where vaporization of a single droplet occurred upon laser irradiation of sufficient intensity, was verified using pulse echo acoustic methods. The ultrasonic backscatter amplitude, acoustic impedance and attenuation increased after vaporization, consistent with a phase change from a liquid to gas core. Photoacoustic measurements were used to compare the spectra of three droplets ranging in diameter from 3.0 to 6.2 μm to a theoretical model. Good agreement in the spectral features was observed over the bandwidth of the 375 MHz transducer.

  15. Pulse sequences for uniform perfluorocarbon droplet vaporization and ultrasound imaging.

    Science.gov (United States)

    Puett, C; Sheeran, P S; Rojas, J D; Dayton, P A

    2014-09-01

    Phase-change contrast agents (PCCAs) consist of liquid perfluorocarbon droplets that can be vaporized into gas-filled microbubbles by pulsed ultrasound waves at diagnostic pressures and frequencies. These activatable contrast agents provide benefits of longer circulating times and smaller sizes relative to conventional microbubble contrast agents. However, optimizing ultrasound-induced activation of these agents requires coordinated pulse sequences not found on current clinical systems, in order to both initiate droplet vaporization and image the resulting microbubble population. Specifically, the activation process must provide a spatially uniform distribution of microbubbles and needs to occur quickly enough to image the vaporized agents before they migrate out of the imaging field of view. The development and evaluation of protocols for PCCA-enhanced ultrasound imaging using a commercial array transducer are described. The developed pulse sequences consist of three states: (1) initial imaging at sub-activation pressures, (2) activating droplets within a selected region of interest, and (3) imaging the resulting microbubbles. Bubble clouds produced by the vaporization of decafluorobutane and octafluoropropane droplets were characterized as a function of focused pulse parameters and acoustic field location. Pulse sequences were designed to manipulate the geometries of discrete microbubble clouds using electronic steering, and cloud spacing was tailored to build a uniform vaporization field. The complete pulse sequence was demonstrated in the water bath and then in vivo in a rodent kidney. The resulting contrast provided a significant increase (>15 dB) in signal intensity.

  16. Are endothelial cell bioeffects from acoustic droplet vaporization proximity dependent?

    Science.gov (United States)

    Seda, Robinson; Li, David; Fowlkes, J. Brian; Bull, Joseph

    2013-11-01

    Acoustic droplet vaporization (ADV) produces gas microbubbles that provide a means of selective occlusion in gas embolotherapy. Vaporization and subsequent occlusion occur inside blood vessels supplying the targeted tissue, such as tumors. Theoretical and computational studies showed that ADV within a vessel can impart high fluid mechanical stresses on the vessel wall. Previous in vitro studies have demonstrated that vaporization at an endothelial layer may affect cell attachment and viability. The current study is aimed at investigating the role of vaporization distance away from the endothelial layer. HUVECs were cultured in OptiCell™ chambers until reaching confluence. Dodecafluoropentane microdroplets were added, attaining a 10:1 droplet to cell ratio. A single ultrasound pulse (7.5 MHz) consisting of 16 cycles (~ 2 μs) and a 5 MPa peak rarefactional pressure was used to produce ADV while varying the vaporization distance from the endothelial layer (0 μm, 500 μm, 1000 μm). Results indicated that cell attachment and viability was significantly different if the distance was 0 μm (at the endothelial layer). Other distances were not significantly different from the control. ADV will significantly affect the endothelium if droplets are in direct contact with the cells. Droplet concentration and flow conditions inside blood vessels may play an important role. This work was supported by NIH grant R01EB006476.

  17. Heat Transfer of Condensation in Smooth Round Tube from Superheated Vapor

    OpenAIRE

    Xiao, Jiange; Hrnjak, Pega

    2016-01-01

    Heat transfer of R134a condensing in a horizontal smooth round tube with 6.1 mm inner diameter is invested in this study. Experimental results on the heat transfer coefficient (HTC) with mass flux from 50 to 200 kg m-2 s-1 and heat flux from 5 to 15 kW m-2 are provided. Heat transfer behavior is compared between condensing superheated (CSH) region and two-phase (TP) region. Experimental result shows that in TP region, higher mass flux results in higher HTC while heat flux does not affect HTC....

  18. Effects of viscosity on endothelial cell damage under acoustic droplet vaporization

    Science.gov (United States)

    Seda, Robinson; Singh, Rahul; Li, David; Pitre, John; Putnam, Andrew; Fowlkes, J. Brian; Bull, Joseph

    2014-11-01

    Acoustic droplet vaporization (ADV) is a process by which stabilized superheated microdroplets are able to undergo phase transition with the aid of focused ultrasound. Gas bubbles resulting from ADV can provide local occlusion of the blood vessels supplying diseased tissue, such as tumors. The ADV process can also induce bioeffects that increase vessel permeability, which is beneficial for localized drug delivery. Previous in vitro studies have demonstrated that vaporization at the endothelial layer will affect cell attachment and viability. Several hypotheses have been proposed to elucidate the mechanism of damage including the generation of normal and shear stresses during bubble expansion. A single 3.5 MHz ultrasound pulse consisting of 8 cycles (~2.3 μs) and a 6 MPa peak rarefactional pressure was used to induce ADV on endothelial cells in media of different viscosities. Carboxylmethyl cellulose was added to the cell media to increase the viscosity up to 300 cP to and aid in the reduction of stresses during bubble expansion. The likelihood of cell damage was decreased when compared to our control (~1 cP), but it was still present in some cases indicating that the mechanism of damage does not depend entirely on viscous stresses associated with bubble expansion. This work was supported by NIH Grant R01EB006476.

  19. Linear Stability Analysis of an Acoustically Vaporized Droplet

    Science.gov (United States)

    Siddiqui, Junaid; Qamar, Adnan; Samtaney, Ravi

    2015-11-01

    Acoustic droplet vaporization (ADV) is a phase transition phenomena of a superheat liquid (Dodecafluoropentane, C5F12) droplet to a gaseous bubble, instigated by a high-intensity acoustic pulse. This approach was first studied in imaging applications, and applicable in several therapeutic areas such as gas embolotherapy, thrombus dissolution, and drug delivery. High-speed imaging and theoretical modeling of ADV has elucidated several physical aspects, ranging from bubble nucleation to its subsequent growth. Surface instabilities are known to exist and considered responsible for evolving bubble shapes (non-spherical growth, bubble splitting and bubble droplet encapsulation). We present a linear stability analysis of the dynamically evolving interfaces of an acoustically vaporized micro-droplet (liquid A) in an infinite pool of a second liquid (liquid B). We propose a thermal ADV model for the base state. The linear analysis utilizes spherical harmonics (Ynm, of degree m and order n) and under various physical assumptions results in a time-dependent ODE of the perturbed interface amplitudes (one at the vapor/liquid A interface and the other at the liquid A/liquid B interface). The perturbation amplitudes are found to grow exponentially and do not depend on m. Supported by KAUST Baseline Research Funds.

  20. Vortex-Induced Vapor Explosion during Drop Impact on a Superheated Pool

    KAUST Repository

    Alchalabi, M.A.

    2017-04-18

    Ultra high-speed imaging is used to investigate the vapor explosion when a drop impacts onto a high-temperature pool. The two liquids are immiscible, a low boiling-temperature perfluorohexane drop, at room temperature, which impacts a high boiling-temperature soybean-oil pool, which is heated well above the boiling temperature of the drop. We observe different regimes: weak and strong nucleate boiling, film boiling or Leidenfrost regime and entrainment followed by vapor explosion. The vapor explosions were seen to depend on the formation of a rotational flow at the edge of the impact crater, near the pool surface, which resembles a vortex ring. This rotational motion entrains a thin sheet of the drop liquid, to become surrounded by the oil. In that region, the vapor explosion starts at a point after which it propagates azimuthally along the entire periphery at high speed.

  1. Experimental Study of Water Droplet Vaporization on Nanostructured Surfaces

    Science.gov (United States)

    Padilla, Jorge, Jr.

    This dissertation summarizes results of an experimental exploration of heat transfer during vaporization of a water droplet deposited on a nanostructured surface at a temperature approaching and exceeding the Leidenfrost point for the surface and at lower surface temperatures 10-40 degrees C above the saturated temperature of the water droplet at approximately 101 kPa. The results of these experiments were compared to those performed on bare smooth copper and aluminum surfaces in this and other studies. The nanostructured surfaces were composed of a vast array of zinc oxide (ZnO) nanocrystals grown by hydrothermal synthesis on a smooth copper substrate having an average surface roughness of approximately 0.06 micrometer. Various nanostructured surface array geometries were produced on the copper substrate by performing the hydrothermal synthesis for 4, 10 and 24 hours. The individual nanostructures were randomly-oriented and, depending on hydrothermal synthesis time, had a mean diameter of about 500-700 nm, a mean length of 1.7-3.3 micrometers,and porosities of approximately 0.04-0.58. Surface wetting was characterized by macroscopic measurements of contact angle based on the droplet profile and calculations based on measurements of liquid film spread area. Scanning electron microscope imaging was used to document the nanoscale features of the surface before and after the experiments. The nanostructured surfaces grown by hydrothermal synthesis for 4 and 24 hours exhibited contact angles of approximately 10, whereas the surfaces grown for 10 hours were superhydrophilic, exhibiting contact angles typically less than 3 degrees. In single droplet deposition experiments at 101 kPa, a high-speed video camera was used to document the droplet-surface interaction. Distilled and degassed water droplets ranging in size from 2.5-4.0 mm were deposited onto the surface from heights ranging from approximately 0.2-8.1 cm, such that Weber numbers spanned a range of approximately 0

  2. Optical studies of vaporization and stability of fluorescently labelled perfluorocarbon droplets

    Science.gov (United States)

    Reznik, Nikita; Seo, Minseok; Williams, Ross; Bolewska-Pedyczak, Eleonora; Lee, Mike; Matsuura, Naomi; Gariepy, Jean; Foster, F. Stuart; Burns, Peter N.

    2012-11-01

    Droplets of liquid perfluorocarbon (PFC) are under study as the next generation of contrast agents for ultrasound (US). These droplets can be selectively vaporized into echogenic gas bubbles in situ by externally applied US, with numerous applications to diagnosis and therapy. However, little is known about the mechanisms of droplet vaporization and the stability of the bubbles so produced. Here we observe optically the vaporization of fluorescent PFC droplets and the stability of the newly created bubbles. Fluorescent markers were used to label selectively either the liquid PFC core or the shell of the droplets. It was found that, following vaporization, the fluorescent marker is quickly expelled from the core of the newly created bubble and is retained on the gas-liquid interface. At the same time, it was shown that bubbles retain the original shells encapsulating their droplet precursors. The efficiency of encapsulation was found to depend strongly on the nature of the stabilizing material itself. These results provide direct evidence of droplet encapsulation post-vaporization, and suggest that the behaviour of the vaporized droplets is strongly dependent on the choice of the stabilizing material for the emulsion.

  3. Effect of Vapor Flow on Jumping Droplets during Condensation on Superhydrophobic Surfaces

    Science.gov (United States)

    Preston, Daniel J.; Miljkovic, Nenad; Enright, Ryan; Limia, Alexander; Wang, Evelyn N.

    2013-11-01

    Upon coalescence of droplets on a superhydrophobic surface, the net reduction in droplet surface area results in a release of surface energy that can cause the coalesced droplet to ``jump'' away from the surface. Jumping condensing surfaces have been shown to enhance condensation heat transfer by up to 30% compared to state-of-the-art dropwise condensing surfaces. While the heat transfer enhancement of jumping condensation is well documented, droplet behavior after departure from the surface has not been considered. Vapor flows to the condensing surface due to mass conservation. This flow can increase drag on departing droplets, resulting in complete droplet reversal and return to the surface. Upon return, these larger droplets impede heat transfer until they jump again or finally shed due to gravity. By characterizing individual droplet trajectories during condensation on hydrophobic nanostructured copper oxide surfaces for a variety of heat fluxes (q'' = 0.1 - 2 W/cm2), we showed that vapor flow entrainment dominates droplet motion for droplets smaller than R ~ 30 um at high heat fluxes (q'' >2 W/cm2). Furthermore, we developed an analytical model of droplet motion based on first principles and the Reynolds drag equation which agreed well with the experimental data. We considered condensation on both flat and tubular geometries with our model, and we suggest avenues to further enhance heat transfer which minimize droplet return due to entrainment.

  4. Thermal activation of superheated lipid-coated perfluorocarbon drops.

    Science.gov (United States)

    Mountford, Paul A; Thomas, Alec N; Borden, Mark A

    2015-04-28

    This study explored the thermal conditions necessary for the vaporization of superheated perfluorocarbon nanodrops. Droplets C3F8 and C4F10 coated with a homologous series of saturated diacylphosphatidylcholines were formed by condensation of 4 μm diameter microbubbles. These drops were stable at room temperature and atmospheric pressure, but they vaporized back into microbubbles at higher temperatures. The vaporization transition was measured as a function of temperature by laser light extinction. We found that C3F8 and C4F10 drops experienced 90% vaporization at 40 and 75 °C, respectively, near the theoretical superheat limits (80-90% of the critical temperature). We therefore conclude that the metastabilty of these phase-change agents arises not from the droplet Laplace pressure altering the boiling point, as previously reported, but from the metastability of the pure superheated fluid to homogeneous nucleation. The rate of C4F10 drop vaporization was quantified at temperatures ranging from 55 to 75 °C, and an apparent activation energy barrier was calculated from an Arrhenius plot. Interestingly, the activation energy increased linearly with acyl chain length from C14 to C20, indicating that lipid interchain cohesion plays an important role in suppressing the vaporization rate. The vaporized drops (microbubbles) were found to be unstable to dissolution at high temperatures, particularly for C14 and C16. However, proper choice of the fluorocarbon and lipid species provided a nanoemulsion that could undergo at least ten reversible condensation/vaporization cycles. The vaporization properties presented in this study may facilitate the engineering of tunable phase-shift particles for diagnostic imaging, targeted drug delivery, tissue ablation, and other applications.

  5. Vapor Transport of a Volatile Solvent for a Multicomponent Aerosol Droplet

    CERN Document Server

    Feng, James Q

    2015-01-01

    This work presents analytical formulas derived for evaluating vapor transport of a volatile solvent for an isolated multicomponent droplet in a quiescent environment, based on quasi-steady-state approximation. Among multiple solvent components, only one component is considered to be much more volatile than the rest such that other components are assumed to be nonvolatile remaining unchanged in the droplet during the process of (single-component) volatile solvent evaporation or condensation. For evaporating droplet, the droplet size often initially decreases following the familiar "d^2 law" at an accelerated rate. But toward the end, the rate of droplet size change diminishes due to the presence of nonvolatile cosolvent. Such an acceleration-deceleration reversal behavior is unique for evaporating multicomponent droplet, while the droplet of pure solvent has an accelerated rate of size change all the way through the end. This reversal behavior is also reflected in the droplet surface temperature evolution as "...

  6. Uranium droplet nuclear reactor core with MHD generator

    Science.gov (United States)

    Anghaie, Samim; Kumar, Ratan

    An innovative concept employing liquid uranium droplets as fuel in an ultrahigh-temperature vapor core reactor (UTVR) magnetohydrodynamic (MHD) generator power system for space power generation has been studied. Metallic vapor in superheated form acts as a working fluid for a closed-Rankine-type thermodynamic cycle. Usage of fuel and working fluid in this form assures certain advantages. The major technical issues emerging as a result involve a method for droplet generation, droplet transport in the reactor core, heat generation in the fuel and transport to the metallic vapor, and materials compatibility. A qualitative and quantitative attempt to resolve these issues has indicated the promise and tentative feasibility of the system.

  7. On the formation of nitrogen oxides during the combustion of partially pre-vaporized droplets

    Energy Technology Data Exchange (ETDEWEB)

    Moesl, Klaus Georg

    2012-12-12

    This study contributes to the topic of nitrogen oxide (NO{sub x}) formation at the level of single droplet and droplet array combustion. The influence of the degree of droplet vaporization and the influence of ambient conditions on NO{sub x} emissions are studied in detail by experiments as well as by numerical simulations. Consequently, this study illustrates correlations and dependencies of the most relevant parameters with respect to the formation of NO{sub x}. It merges the fields of droplet pre-vaporization, ignition, combustion, and exhaust gas formation, including a sophisticated approach to NO{sub x} determination. Even though the study was conducted in order to help understand the fundamental process of burning idealized droplets, the processes in spray combustion have also been taken into consideration within its scope. The portability of results obtained from those idealized droplet burning regimes is evaluated for real applications. Thus, this study may also help to derive design recommendations for liquid-fueled combustion devices. While the experimental part focuses on droplet array combustion, the numerical part highlights spherically symmetric single droplet combustion. By performing experiments in a microgravity environment, quasi-spherical conditions were facilitated for droplet burning, and comparability was provided for the experimental and numerical results. A novelty of the numerical part is the investigation of mechanisms of NO{sub x} formation under technically relevant conditions. This includes partial pre-vaporization of the droplets as well as droplet combustion in a hot exhaust gas environment, such as an aero-engine. The results show that the trade-off between ambient temperature and available oxygen determines the NO{sub x} formation of droplets burning in hot exhaust gas. If the ambient temperature is high and there is still sufficient oxygen for full oxidation of the fuel provided by the droplet, the maximum of NOx formation is

  8. The efficiency and stability of bubble formation by acoustic vaporization of submicron perfluorocarbon droplets.

    Science.gov (United States)

    Reznik, Nikita; Shpak, Oleksandr; Gelderblom, Erik C; Williams, Ross; de Jong, Nico; Versluis, Michel; Burns, Peter N

    2013-09-01

    Submicron droplets of liquid perfluorocarbon converted into microbubbles with applied ultrasound have been studied, for a number of years, as potential next generation extravascular ultrasound contrast agents. In this work, we conduct an initial ultra-high-speed optical imaging study to examine the vaporization of submicron droplets and observe the newly created microbubbles in the first microseconds after vaporization. It was estimated that single pulses of ultrasound at 10 MHz with pressures within the diagnostic range are able to vaporize on the order of at least 10% of the exposed droplets. However, only part of the newly created microbubbles survives immediately following vaporization - the bubbles may recondense back into the liquid droplet state within microseconds of nucleation. The probability of bubble survival within the first microseconds of vaporization was shown to depend on ultrasound excitation pressure as well as on bubble coalescence during vaporization, a behavior influenced by the presence of coating material on the newly created bubbles. The results of this study show for the first time that although initial vaporization of droplets is necessary to create echogenic bubbles, additional factors, such as coalescence and bubble shell properties, are important and should be carefully considered for the production of microbubbles for use in medical imaging.

  9. Multivariable theory of droplet nucleation in a single-component vapor

    CERN Document Server

    Alekseechkin, Nikolay V

    2014-01-01

    The multivariable theory of nucleation [N. V. Alekseechkin, J. Chem. Phys. 124, 124512 (2006)] is applied to the droplet nucleation in a supersaturated single-component vapor; the droplet volume V, temperature T, and volume change rate U=V_dot are the variables of the theory. A new approach based on macroscopic kinetics is developed for the droplet evolution and results in the derived equations for U_dot, V_dot, and T_dot. It is shown that there is no the viscosity effect in the employed ideal gas approximation, so the variable U can be omitted. The nonisothermal effect (the discrepancy between the actual and isothermal nucleation rates) earlier studied numerically is analytically examined here. The calculated steady state distribution function of droplets shows their average overheating relatively the vapor temperature. An inert background gas is shown to diminish the nonisothermal effect in comparison with a pure vapor case.

  10. Modeling of fuel vapor jet eruption induced by local droplet heating

    KAUST Repository

    Sim, Jaeheon

    2014-01-10

    The evaporation of a droplet by non-uniform heating is numerically investigated in order to understand the mechanism of the fuel-vapor jet eruption observed in the flame spread of a droplet array under microgravity condition. The phenomenon was believed to be mainly responsible for the enhanced flame spread rate through a droplet cloud at microgravity conditions. A modified Eulerian-Lagrangian method with a local phase change model is utilized to describe the interfacial dynamics between liquid droplet and surrounding air. It is found that the localized heating creates a temperature gradient along the droplet surface, induces the corresponding surface tension gradient, and thus develops an inner flow circulation commonly referred to as the Marangoni convection. Furthermore, the effect also produces a strong shear flow around the droplet surface, thereby pushing the fuel vapor toward the wake region of the droplet to form a vapor jet eruption. A parametric study clearly demonstrated that at realistic droplet combustion conditions the Marangoni effect is indeed responsible for the observed phenomena, in contrast to the results based on constant surface tension approximation

  11. Sound Propagation in Gas-Vapor-Droplet Suspensions with Evaporation and Nonlinear Particle Relaxation

    Science.gov (United States)

    Kandula, Max

    2012-01-01

    The Sound attenuation and dispersion in saturated gas-vapor-droplet mixture in the presence of evaporation has been investigated theoretically. The theory is based on an extension of the work of Davidson to accommodate the effects of nonlinear particle relaxation processes of mass, momentum and energy transfer on sound attenuation and dispersion. The results indicate the existence of a spectral broadening effect in the attenuation coefficient (scaled with respect to the peak value) with a decrease in droplet mass concentration. It is further shown that for large values of the droplet concentration the scaled attenuation coefficient is characterized by a universal spectrum independent of droplet mass concentration.

  12. Nucleation stage in supersaturated vapor with inhomogeneities due to nonstationary diffusion onto growing droplets

    CERN Document Server

    Kuchma, Anatoly; Shchekin, Alexander

    2013-01-01

    An analytical description of nucleation stage in a supersaturated vapor with instantly created supersaturation is given with taking into account the vapor concentration inhomogeneities arising as a result of depletion due to non-stationary diffusion onto growing droplets. This description suggests that the intensity of the nucleation of new droplets is suppressed in spherical diffusion regions of a certain size surrounding previously nucleated droplets, and remains at the initial level in the remaining volume of the vapor-gas medium. The value of volume excluded from nucleation depends on the explicit form of the vapor concentration profile in the space around the growing droplet, and we use for that the unsteady self-similar solution of time-dependent diffusion equation with a convective term describing the flow of the gas-vapor mixture caused by moving surface of single growing droplet. The main characteristics of the phase transition at the end of the nucleation stage are found and compared with those in t...

  13. Sound Propagation in Saturated Gas-Vapor-Droplet Suspensions Considering the Effect of Transpiration on Droplet Evaporation

    Science.gov (United States)

    Kandula, Max

    2012-01-01

    The Sound attenuation and dispersion in saturated gas-vapor-droplet mixtures with evaporation has been investigated theoretically. The theory is based on an extension of the work of Davidson (1975) to accommodate the effects of transpiration on the linear particle relaxation processes of mass, momentum and energy transfer. It is shown that the inclusion of transpiration in the presence of mass transfer improves the agreement between the theory and the experimental data of Cole and Dobbins (1971) for sound attenuation in air-water fogs at low droplet mass concentrations. The results suggest that transpiration has an appreciable effect on both sound absorption and dispersion for both low and high droplet mass concentrations.

  14. Vapor film collapse triggered by external pressure pulse and the fragmentation of melt droplet in FCIs

    Institute of Scientific and Technical Information of China (English)

    LIN Qian; TONG Lili; CAO Xuewu; KRIVENTSEV Vladimir

    2008-01-01

    The fragmentation process of high-temperature molten drop is a key factor to determine the ratio heat transferred to power in FCIs,which estimates the possible damage degree during the hypothetical severe accident in the nuclear reactors.In this paper,the fragmentation process of melt droplet in FCIs is investigated by theoretic analysis.The fragmentation mechanism is studied when an external pressure pulse applied to a melt droplet,which is surrounded by vapor film.The vapor film collapse which induces fragmentation of melt droplet is analyzed and modeled.And then the generated pressure is calculated.The vapor film collapse model is introduced to fragmentation correlation,and the predicted fragment size is calculated and compared with experimental data.The result shows that the developed model can predict the diameter of fragments and can be used to calculate the fragmentation process appreciatively.

  15. CONDENSATION OF R134a SUPERHEATED VAPOR IN THREE-DIMENSIONAL MICROFIN TUBE%R134a过热蒸汽在三维内微肋管内的凝结换热特性

    Institute of Scientific and Technical Information of China (English)

    陈清华; 崔文智; 辛明道; 周杰; 张罡

    2000-01-01

    本文对三维内微肋管内进口区段R134a过热蒸汽的凝结换热过程进行了实验研究。结果表明:微肋管内过热蒸汽过热度降低的速率明显高于光管,且主要受质量流率和管壁过冷度的影响。本文得到的过热蒸汽凝结换热计算式与实验的偏差在±15%以内。%An experimental investigation of R134a superheated vapor condensation in the entrance region of three-dimensional microfin tube is conducted. The decease rate of superheated vapor temperature in the 3-D microfin tube is larger than that in smooth tube. The obtained empirical correlation of superheated vapor condensation has ±15% deviation when compared with the experimental data.

  16. A laser extinction based sensor for simultaneous droplet size and vapor measurement

    Institute of Scientific and Technical Information of China (English)

    Xueqiang Sun; David J. Ewing; Lin Ma

    2012-01-01

    Multiphase flows involving liquid droplets in association with gas flow occur in many industrial and scientific applications.Recent work has demonstrated the feasibility of using optical techniques based on laser extinction to simultaneously measure vapor concentration and temperature and droplet size and loading.This work introduces the theoretical background for the optimal design of such laser extinction techniques,termed WMLE (wavelength-multiplexed laser extinction).This paper focuses on the development of WMLE and presents a systematic methodology to guide the selection of suitable wavelengths and optimize the performance of WMLE for specific applications.WMLE utilizing wavelengths from 0.5to 10 μm is illustrated for droplet size and vapor concentration measurements in an example of water spray,and is found to enable unique and sensitive Sauter mean diameter measurement in the range of ~1-15μm along with accurate vapor detection.A vapor detection strategy based on differential absorption is developed to extend accurate measurement to a significantly wider range of droplet loading and vapor concentration as compared to strategies based on direct fixed-wavelength absorption.Expected performance of the sensor is modeled for an evaporating spray.This work is expected to lay the groundwork for implementing optical sensors based on WMLE in a variety of research and industrial applications involving multi-phase flows.

  17. Surface boiling of superheated liquid

    Energy Technology Data Exchange (ETDEWEB)

    Reinke, P. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-01-01

    A basic vaporization mechanism that possibly affects the qualitative and quantitative prediction of the consequences of accidental releases of hazardous superheated liquids was experimentally and analytically investigated. The studies are of relevance for the instantaneous failure of a containment vessel filled with liquefied gas. Even though catastrophical vessel failure is a rare event, it is considered to be a major technological hazard. Modeling the initial phase of depressurisation and vaporization of the contents is an essential step for the subsequent analysis of the spread and dispersion of the materials liberated. There is only limited understanding of this inertial expansion stage of the superheated liquid, before gravity and atmospheric turbulence begin to dominate the expansion. This work aims at a better understanding of the vaporization process and to supply more precise source-term data. It is also intended to provide knowledge for the prediction of the behavior of large-scale releases by the investigation of boiling on a small scale. Release experiments with butane, propane, R-134a and water were conducted. The vaporization of liquids that became superheated by sudden depressurisation was studied in nucleation-site-free glass receptacles. Several novel techniques for preventing undesired nucleation and for opening the test-section were developed. Releases from pipes and from a cylindrical geometry allowed both linear one-dimensional, and radial-front two-dimensional propagation to be investigated. Releases were made to atmospheric pressure over a range of superheats. It was found that, above a certain superheat temperature, the free surface of the metastable liquid rapidly broke up and ejected a high-velocity vapor/liquid stream. The zone of intense vaporization and liquid fragmentation proceeded as a front that advanced into the test fluids. No nucleation of bubbles in the bulk of the superheated liquid was observed. (author) figs., tabs., refs.

  18. BOILER-SUPERHEATED REACTOR

    Science.gov (United States)

    Heckman, T.P.

    1961-05-01

    A nuclear power reactor of the type in which a liquid moderator-coolant is transformed by nuclear heating into a vapor that may be used to drive a turbo- generator is described. The core of this reactor comprises a plurality of freely suspended tubular fuel elements, called fuel element trains, within which nonboiling pressurized liquid moderator-coolant is preheated and sprayed through orifices in the walls of the trains against the outer walls thereof to be converted into vapor. Passage of the vapor ovcr other unwetted portions of the outside of the fuel elements causes the steam to be superheated. The moderatorcoolant within the fuel elements remains in the liqUid state, and that between the fuel elements remains substantiaily in the vapor state. A unique liquid neutron-absorber control system is used. Advantages expected from the reactor design include reduced fuel element failure, increased stability of operation, direct response to power demand, and circulation of a minimum amount of liquid moderatorcoolant. (A.G.W.)

  19. Energy balance in laser-irradiated vaporizing droplets

    Energy Technology Data Exchange (ETDEWEB)

    Zardecki, A.; Armstrong, R.L.

    1987-09-08

    We analyze the interactions of atmospheric aerosols with a high-energy laser beam. The energy balance equation allows us to compute the conversion of the pulse energy into temperature increase, vaporization, conduction, and convection. We also include the shrinkage term whose significance has recently been discussed by Davies and Brock.

  20. Vaporization dynamics of volatile perfluorocarbon droplets: A theoretical model and in vitro validation

    Energy Technology Data Exchange (ETDEWEB)

    Doinikov, Alexander A., E-mail: doinikov@bsu.by; Bouakaz, Ayache [Inserm U930, Université François Rabelais, Tours 37044 (France); Sheeran, Paul S.; Dayton, Paul A. [Joint Department of Biomedical Engineering, The University of North Carolina and North Carolina State University, Chapel Hill, North Carolina 27599 (United States)

    2014-10-15

    Purpose: Perfluorocarbon (PFC) microdroplets, called phase-change contrast agents (PCCAs), are a promising tool in ultrasound imaging and therapy. Interest in PCCAs is motivated by the fact that they can be triggered to transition from the liquid state to the gas state by an externally applied acoustic pulse. This property opens up new approaches to applications in ultrasound medicine. Insight into the physics of vaporization of PFC droplets is vital for effective use of PCCAs and for anticipating bioeffects. PCCAs composed of volatile PFCs (with low boiling point) exhibit complex dynamic behavior: after vaporization by a short acoustic pulse, a PFC droplet turns into a vapor bubble which undergoes overexpansion and damped radial oscillation until settling to a final diameter. This behavior has not been well described theoretically so far. The purpose of our study is to develop an improved theoretical model that describes the vaporization dynamics of volatile PFC droplets and to validate this model by comparison with in vitro experimental data. Methods: The derivation of the model is based on applying the mathematical methods of fluid dynamics and thermodynamics to the process of the acoustic vaporization of PFC droplets. The used approach corrects shortcomings of the existing models. The validation of the model is carried out by comparing simulated results with in vitro experimental data acquired by ultrahigh speed video microscopy for octafluoropropane (OFP) and decafluorobutane (DFB) microdroplets of different sizes. Results: The developed theory allows one to simulate the growth of a vapor bubble inside a PFC droplet until the liquid PFC is completely converted into vapor, and the subsequent overexpansion and damped oscillations of the vapor bubble, including the influence of an externally applied acoustic pulse. To evaluate quantitatively the difference between simulated and experimental results, the L2-norm errors were calculated for all cases where the

  1. Vaporization dynamics of volatile perfluorocarbon droplets: a theoretical model and in vitro validation.

    Science.gov (United States)

    Doinikov, Alexander A; Sheeran, Paul S; Bouakaz, Ayache; Dayton, Paul A

    2014-10-01

    Perfluorocarbon (PFC) microdroplets, called phase-change contrast agents (PCCAs), are a promising tool in ultrasound imaging and therapy. Interest in PCCAs is motivated by the fact that they can be triggered to transition from the liquid state to the gas state by an externally applied acoustic pulse. This property opens up new approaches to applications in ultrasound medicine. Insight into the physics of vaporization of PFC droplets is vital for effective use of PCCAs and for anticipating bioeffects. PCCAs composed of volatile PFCs (with low boiling point) exhibit complex dynamic behavior: after vaporization by a short acoustic pulse, a PFC droplet turns into a vapor bubble which undergoes overexpansion and damped radial oscillation until settling to a final diameter. This behavior has not been well described theoretically so far. The purpose of our study is to develop an improved theoretical model that describes the vaporization dynamics of volatile PFC droplets and to validate this model by comparison with in vitro experimental data. The derivation of the model is based on applying the mathematical methods of fluid dynamics and thermodynamics to the process of the acoustic vaporization of PFC droplets. The used approach corrects shortcomings of the existing models. The validation of the model is carried out by comparing simulated results with in vitro experimental data acquired by ultrahigh speed video microscopy for octafluoropropane (OFP) and decafluorobutane (DFB) microdroplets of different sizes. The developed theory allows one to simulate the growth of a vapor bubble inside a PFC droplet until the liquid PFC is completely converted into vapor, and the subsequent overexpansion and damped oscillations of the vapor bubble, including the influence of an externally applied acoustic pulse. To evaluate quantitatively the difference between simulated and experimental results, the L2-norm errors were calculated for all cases where the simulated and experimental

  2. A computational study of droplet evaporation with fuel vapor jet ejection induced by localized heat sources

    KAUST Repository

    Sim, Jaeheon

    2015-05-12

    Droplet evaporation by a localized heat source under microgravity conditions was numerically investigated in an attempt to understand the mechanism of the fuel vapor jet ejection, which was observed experimentally during the flame spread through a droplet array. An Eulerian-Lagrangian method was implemented with a temperature-dependent surface tension model and a local phase change model in order to effectively capture the interfacial dynamics between liquid droplet and surrounding air. It was found that the surface tension gradient caused by the temperature variation within the droplet creates a thermo-capillary effect, known as the Marangoni effect, creating an internal flow circulation and outer shear flow which drives the fuel vapor into a tail jet. A parametric study demonstrated that the Marangoni effect is indeed significant at realistic droplet combustion conditions, resulting in a higher evaporation constant. A modified Marangoni number was derived in order to represent the surface force characteristics. The results at different pressure conditions indicated that the nonmonotonic response of the evaporation rate to pressure may also be attributed to the Marangoni effect.

  3. An analytical study of the effects of vaporization of twodimensional laminar droplets on a triple flame

    Directory of Open Access Journals (Sweden)

    Bidabadi Mehdi

    2011-01-01

    Full Text Available The structure of triple flame propagation in combustion systems, containing uniformly distributed volatile fuel droplet was analyzed. The analysis was established for a one-step irreversible reaction with an asymptotic limit, where the value of the Zeldovich Number is large. Here, using unit Lewis number, the analytical results for the triple flame temperature were obtained considering two sections. In the first section, a non-vaporizing fuel stream was studied and in the second section, a volatile droplet fuel stream was taken into account. It is presumed that the fuel droplets vaporize to yield a gaseous fuel of known chemical structure, which is subsequently oxidized in the gaseous phase. Here two different cases are studied. In the first case, only the velocity parallel to the reactant flow was considered; while for the latter one, the vertical velocity was considered in addition. The energy equations were solved and the temperature field equations are presented. The results are first presented for a non-vaporizing fuel and compared to the experiment results. In addition, some other results of the temperature field for a vaporizing fuel stream are demonstrated within the comparison between the abovementioned cases which revealed the effect of the considering the vertical velocity component on the flame temperature field.

  4. The Stefan outflow in a multicomponent vapor-gas atmosphere around a droplet and its role for cloud expansion

    CERN Document Server

    Kuchma, A E; Martyukova, D S

    2016-01-01

    A new comprehensive analysis of Stefan's flow caused by a free growing droplet in vapor-gas atmosphere with several condensing components is presented. This analysis, based on the nonstationary heat and material balance and diffusion transport equations, shows the appearance of the Stefan inflow in the vicinity of the growing droplet and the outflow at large distances from the droplet as a consequence of nonisothermal condensation. For an ensemble of droplets in the atmospheric cloud, this flow provides an increase of the total volume of the cloud, which can be treated as cloud thermal expansion and leads to floating the cloud as a whole due to buoyancy. We have formulated the self-similar solutions of the nonstationary diffusion and heat conduction equations for a growing multicomponent droplet and have derived analytical expressions for the nonstationary velocity profile of Stefan's flow and the expansion volume of the vapor-gas mixture around the growing droplet. To illustrate the approach, we computed the...

  5. An analytical study of the effects of vaporization of twodimensional laminar droplets on a triple flame

    OpenAIRE

    Bidabadi Mehdi; Barari Ghazal; Azimi Milad

    2011-01-01

    The structure of triple flame propagation in combustion systems, containing uniformly distributed volatile fuel droplet was analyzed. The analysis was established for a one-step irreversible reaction with an asymptotic limit, where the value of the Zeldovich Number is large. Here, using unit Lewis number, the analytical results for the triple flame temperature were obtained considering two sections. In the first section, a non-vaporizing fuel stream was studied and in the second section...

  6. Modeling droplet vaporization and combustion with the volume of fluid method at a small Reynolds number

    Institute of Scientific and Technical Information of China (English)

    Xiao-bin ZHANG; Wei ZHANG; Xue-jun ZHANG

    2012-01-01

    The volume of fluid (VOF) formulation is applied to model the combustion process of a single droplet in a hightemperature convective air free stream environment.The calculations solve the flow field for both phases,and consider the droplet deformation based on an axisymmetrical model.The chemical reaction is modeled with one-step finite-rate mechanism and the thcrmo-physica1 properties for the gas mixture are species and temperature dependence.A mass transfer model applicable to the VOF calculations due to vaporization of the liquid phases is developed in consideration with the fluctuation of the liquid surface.The model is validated by examining the burning rate constants at different convective air temperatures,which accord well with experimental data of previous studies.Other phenomena from the simulations,such as the transient history of droplet deformation and flame structure,are also qualitatively accordant with the descriptions of other numerical results.However,a different droplet deformation mechanism for the low Reynolds number is explained compared with that for the high Reynolds number.The calculations verified the feasibility of the VOF computational fluid dynamics (CFD) formulation as well as the mass transfer model due to vaporization.

  7. Vaporization and recondensation dynamics of indocyanine green-loaded perfluoropentane droplets irradiated by a short pulse laser

    Science.gov (United States)

    Yu, Jaesok; Chen, Xucai; Villanueva, Flordeliza S.; Kim, Kang

    2016-12-01

    Phase-transition droplets have been proposed as promising contrast agents for ultrasound and photoacoustic imaging. Short pulse laser activated perfluorocarbon-based droplets, especially when in a medium with a temperature below their boiling point, undergo phase changes of vaporization and recondensation in response to pulsed laser irradiation. Here, we report and discuss the vaporization and recondensation dynamics of perfluoropentane droplets containing indocyanine green in response to a short pulsed laser with optical and acoustic measurements. To investigate the effect of temperature on the vaporization process, an imaging chamber was mounted on a temperature-controlled water reservoir and then the vaporization event was recorded at 5 million frames per second via a high-speed camera. The high-speed movies show that most of the droplets within the laser beam area expanded rapidly as soon as they were exposed to the laser pulse and immediately recondensed within 1-2 μs. The vaporization/recondensation process was consistently reproduced in six consecutive laser pulses to the same area. As the temperature of the media was increased above the boiling point of the perfluoropentane, the droplets were less likely to recondense and remained in a gas phase after the first vaporization. These observations will help to clarify the underlying processes and eventually guide the design of repeatable phase-transition droplets as a photoacoustic imaging contrast agent.

  8. Drop Impact on Superheated Surfaces

    NARCIS (Netherlands)

    Tran, A.T.; Staat, H.J.J.; Prosperetti, A.; Sun, C.; Lohse, D.

    2012-01-01

    At the impact of a liquid droplet on a smooth surface heated above the liquid’s boiling point, the droplet either immediately boils when it contacts the surface (“contact boiling”), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back (“gentle film

  9. Electrospray droplet exposure to organic vapors: metal ion removal from proteins and protein complexes.

    Science.gov (United States)

    DeMuth, J Corinne; McLuckey, Scott A

    2015-01-20

    The exposure of aqueous nanoelectrospray droplets to various organic vapors can dramatically reduce sodium adduction on protein ions in positive ion mass spectra. Volatile alcohols, such as methanol, ethanol, and isopropanol lead to a significant reduction in sodium ion adduction but are not as effective as acetonitrile, acetone, and ethyl acetate. Organic vapor exposure in the negative ion mode, on the other hand, has essentially no effect on alkali ion adduction. Evidence is presented to suggest that the mechanism by which organic vapor exposure reduces alkali ion adduction in the positive mode involves the depletion of alkali metal ions via ion evaporation of metal ions solvated with organic molecules. The early generation of metal/organic cluster ions during the droplet desolvation process results in fewer metal ions available to condense on the protein ions formed via the charged residue mechanism. These effects are demonstrated with holomyoglobin ions to illustrate that the metal ion reduction takes place without detectable protein denaturation, which might be revealed by heme loss or an increase in charge state distribution. No evidence is observed for denaturation with exposure to any of the organic vapors evaluated in this work.

  10. Simulation and modeling of turbulent non isothermal vapor-droplet dispersed flow

    Energy Technology Data Exchange (ETDEWEB)

    Baalbaki, Daoud

    2011-12-15

    One of the reference accident that may occur in PWR (Pressurized Water Reactor) is LOCA (Loss of Coolant Accident). The LOCA is studied to design some emergency systems implemented in the basic nuclear installations. The LOCA corresponds to the break of a pipe in the primary loop. This accident is associated with a loss of pressure which leads to the vaporization of the water in the reactor core and then to the rise of the temperature of the assemblies. In this study, we focus on the area of vapor-droplet flow, where the cooling effectiveness of such a mixture is a major concern. The droplets act as heat sinks for the vapor and control the vapor temperature profile which, in turn, determines the wall heat transfer rate. Our general objective is to ameliorate the modeling of the vapor-droplet flow (i.e. at CFD scale). Particularly the estimation of the radial distribution of the droplets. The volume fraction distribution of the two phases depends on the size and dispersion of the droplets in the flow. The size of the droplets is controlled by the rupture and coalescence mechanisms and the interfacial mass transfer (evaporation/condensation). The distribution of the droplets is controlled by the transfer of momentum between the two phases. Our study focuses particularly on the latter point. We are restricted to flows where the liquid water flows under the form of non-deformable spherical droplets that do not interact with each other. Both phases are treated by a two-fluid approach Euler-Euler. In chapter 2, a description of two-phase flow model is presented, using separate mass, momentum, and energy equations for the two phases. These separate balance equations are obtained in an averaging process starting from the local instantaneous conservation equations of the individual phases. During the averaging process, important information on local flow processes are lost and, consequently, additional correlations are needed in order to close the system of equations. The

  11. Drop impact on superheated surfaces

    CERN Document Server

    Tran, Tuan; Prosperetti, Andrea; Sun, Chao; Lohse, Detlef

    2011-01-01

    At impact of a liquid droplet on a smooth surface heated above the liquid's boiling point, the droplet either immediately boils when it contacts the surfaces (``contact boiling''), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back (``gentle film boiling''), or both forms the Leidenfrost layer and ejects tiny droplets upward (``spraying film boiling''). We experimentally determine conditions under which impact behaviors in each regime can be realized. We show that the dimensionless maximum spreading $\\gamma$ of impacting droplets on the heated surfaces in both gentle and spraying film boiling regimes shows a universal scaling with the Weber number $\\We$ ($\\gamma\\sim\\We^{2/5}$) -- regardless of surface temperature and of liquid properties -- which is much steeper than for the impact on non-heated (hydrophilic or hydrophobic) surfaces ($\\gamma\\sim\\We^{1/4}$). We also intereferometrically measure the vapor thickness under the droplet.

  12. Drop impact on superheated surfaces.

    Science.gov (United States)

    Tran, Tuan; Staat, Hendrik J J; Prosperetti, Andrea; Sun, Chao; Lohse, Detlef

    2012-01-20

    At the impact of a liquid droplet on a smooth surface heated above the liquid's boiling point, the droplet either immediately boils when it contacts the surface ("contact boiling"), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back ("gentle film boiling"), or both forms the Leidenfrost layer and ejects tiny droplets upward ("spraying film boiling"). We experimentally determine conditions under which impact behaviors in each regime can be realized. We show that the dimensionless maximum spreading γ of impacting droplets on the heated surfaces in both gentle and spraying film boiling regimes shows a universal scaling with the Weber number We (γ~We(2/5)), which is much steeper than for the impact on nonheated (hydrophilic or hydrophobic) surfaces (γ~We(1/4)). We also interferometrically measure the vapor thickness under the droplet.

  13. Imaging of Droplets and Vapor Distributions in a Diesel Fuel Spray by Means of a Laser Absorption Scattering Technique

    Science.gov (United States)

    Zhang, Yu-Yin; Yoshizaki, Takuo; Nishida, Keiya

    2000-11-01

    The droplets and vapor distributions in a fuel spray were imaged by a dual-wavelength laser absorption scattering technique. 1,3-dimethylnaphthalene, which has physical properties similar to those of Diesel fuel, strongly absorbs the ultraviolet light near the fourth harmonic (266 nm) of a Nd:YAG laser but is nearly transparent to the visible light near the second harmonic (532 nm) of a Nd:YAG laser. Therefore, droplets and vapor distributions in a Diesel spray can be visualized by an imaging system that uses a Nd:YAG laser as the incident light and 1,3-dimethylnaphthalene as the test fuel. For a quantitative application consideration, the absorption coefficients of dimethylnapthalene vapor at different temperatures and pressures were examined with an optical spectrometer. The findings of this study suggest that this imaging technique has great promise for simultaneously obtaining quantitative information of droplet density and vapor concentration in Diesel fuel spray.

  14. Imaging of droplets and vapor distributions in a diesel fuel spray by means of a laser absorption-scattering technique.

    Science.gov (United States)

    Zhang, Y Y; Yoshizaki, T; Nishida, K

    2000-11-20

    The droplets and vapor distributions in a fuel spray were imaged by a dual-wavelength laser absorption-scattering technique. 1,3-dimethylnaphthalene, which has physical properties similar to those of Diesel fuel, strongly absorbs the ultraviolet light near the fourth harmonic (266 nm) of a Nd:YAG laser but is nearly transparent to the visible light near the second harmonic (532 nm) of a Nd:YAG laser. Therefore, droplets and vapor distributions in a Diesel spray can be visualized by an imaging system that uses a Nd:YAG laser as the incident light and 1,3-dimethylnaphthalene as the test fuel. For a quantitative application consideration, the absorption coefficients of dimethylnapthalene vapor at different temperatures and pressures were examined with an optical spectrometer. The findings of this study suggest that this imaging technique has great promise for simultaneously obtaining quantitative information of droplet density and vapor concentration in Diesel fuel spray.

  15. An Experimental Study on the Dynamics of a Single Droplet Vapor Explosion

    Energy Technology Data Exchange (ETDEWEB)

    Concilio Hansson, Roberta

    2010-07-01

    The present study aims to develop a mechanistic understanding of the thermal-hydraulic processes in a vapor explosion, which may occur in nuclear power plants during a hypothetical severe accident involving interactions of high-temperature corium melt and volatile coolant. Over the past several decades, a large body of literature has been accumulated on vapor explosion phenomenology and methods for assessment of the related risk. Vapor explosion is driven by a rapid fragmentation of high temperature melt droplets, leading to a substantial increase of heat transfer areas and subsequent explosive evaporation of the volatile coolant. Constrained by the liquid-phase coolant, the rapid vapor production in the interaction zone causes pressurization and dynamic loading on surrounding structures. While such a general understanding has been established, the triggering mechanism and subsequent dynamic fine fragmentation have yet not been clearly understood. A few mechanistic fragmentation models have been proposed, however, computational efforts to simulate the phenomena generated a large scatter of results. Dynamics of the hot liquid (melt) droplet and the volatile liquid (coolant) are investigated in the MISTEE (Micro-Interactions in Steam Explosion Experiments) facility by performing well-controlled, externally triggered, single-droplet experiments, using a high-speed visualization system with synchronized digital cinematography and continuous X-ray radiography, called SHARP (Simultaneous High-speed Acquisition of X-ray Radiography and Photography). After an elaborate image processing, the SHARP images depict the evolution of both melt material (dispersal) and coolant (bubble dynamics), and their microscale interactions, i.e. the triggering phenomenology. The images point to coolant entrainment into the droplet surface as the mechanism for direct contact/mixing ultimately responsible for energetic interactions. Most importantly, the MISTEE data reveals an inverse

  16. Characterization of acoustic droplet vaporization for control of bubble generation under flow conditions.

    Science.gov (United States)

    Kang, Shih-Tsung; Huang, Yi-Luan; Yeh, Chih-Kuang

    2014-03-01

    This study investigated the manipulation of bubbles generated by acoustic droplet vaporization (ADV) under clinically relevant flow conditions. Optical microscopy and high-frequency ultrasound imaging were used to observe bubbles generated by 2-MHz ultrasound pulses at different time points after the onset of ADV. The dependence of the bubble population on droplet concentration, flow velocity, fluid viscosity and acoustic parameters, including acoustic pressure, pulse duration and pulse repetition frequency, was investigated. The results indicated that post-ADV bubble growth spontaneously driven by air permeation markedly affected the bubble population after insonation. The bubbles can grow to a stable equilibrium diameter as great as twice the original diameter in 0.5-1 s, as predicted by the theoretical calculation. The growth trend is independent of flow velocity, but dependent on fluid viscosity and droplet concentration, which directly influence the rate of gas uptake by bubbles and the rate of gas exchange across the wall of the semipermeable tube containing the bubbles and, hence, the gas content of the host medium. Varying the acoustic pressure does not markedly change the formation of bubbles as long as the ADV thresholds of most droplets are reached. Varying pulse duration and pulse repetition frequency markedly reduces the number of bubbles. Lengthening pulse duration favors the production of large bubbles, but reduces the total number of bubbles. Increasing the PRF interestingly provides superior performance in bubble disruption. These results also suggest that an ADV bubble population cannot be assessed simply on the basis of initial droplet size or enhancement of imaging contrast by the bubbles. Determining the optimal acoustic parameters requires careful consideration of their impact on the bubble population produced for different application scenarios.

  17. Optical droplet vaporization of nanoparticle-loaded stimuli-responsive microbubbles

    Science.gov (United States)

    Si, Ting; Li, Guangbin; Wu, Qiang; Zhu, Zhiqiang; Luo, Xisheng; Xu, Ronald X.

    2016-03-01

    A capillary co-flow focusing process is developed to generate stimuli-responsive microbubbles (SRMs) that comprise perfluorocarbon (PFC) suspension of silver nanoparticles (SNPs) in a lipid shell. Upon continuous laser irradiation at around their surface plasmon resonance band, the SNPs effectively absorb electromagnetic energy, induce heat accumulation in SRMs, trigger PFC vaporization, and eventually lead to thermal expansion and fragmentation of the SRMs. This optical droplet vaporization (ODV) process is further simulated by a theoretical model that combines heat generation of SNPs, phase change of PFC, and thermal expansion of SRMs. The model is validated by benchtop experiments, where the ODV process is monitored by microscopic imaging. The effects of primary process parameters on behaviors of ODV are predicted by the theoretical model, indicating the technical feasibility for process control and optimization in future drug delivery applications.

  18. LETTER TO THE EDITOR: Homogeneous nucleation for superheated crystal

    Science.gov (United States)

    Iwamatsu, Masao

    1999-01-01

    Homogeneous nucleation of liquid droplets in superheated crystals is considered in order to estimate the maximum superheating of crystals. Using the previously derived universal order parameter model of the crystal-melt transition (Iwamatsu M and Horii K 1996 J. Phys. Soc. Japan 65 2311), it is determined that the catastrophic homogeneous nucleation occurs at 0953-8984/11/1/001/img1, where 0953-8984/11/1/001/img2 is the equilibrium melting point. This numerical estimation is consistent with the results of maximum-superheating experiments.

  19. A study of the effect of binary oxide materials in a single droplet vapor explosion

    Energy Technology Data Exchange (ETDEWEB)

    Hansson, R.C., E-mail: rch@kth.se [Royal Institute of Technology, Stockholm (Sweden); Dinh, T.N.; Manickam, L.T. [Royal Institute of Technology, Stockholm (Sweden)

    2013-11-15

    In an effort to explore fundamental mechanisms that may govern the effect of melt material on vapor explosion's triggering, fine fragmentation and energetics, a series of experiments using a binary-oxide mixture with eutectic and non-eutectic compositions were performed. Interactions of a hot liquid (WO{sub 3}–CaO) droplet and a volatile liquid (water) were investigated in well-controlled, externally triggered, single-droplet experiments conducted in the Micro-interactions in steam explosion experiments (MISTEE) facility. The tests were visualized by means of a synchronized digital cinematography and continuous X-ray radiography system, called simultaneous high-speed acquisition of X-ray radiography and photography (SHARP). The acquired images followed by further analysis indicate milder interactions for the droplet with non-eutectic melt composition in the tests with low melt superheat, whereas no evident differences between eutectic and non-eutectic melt compositions regarding bubble dynamics, energetics and melt preconditioning was observed in the tests with higher melt superheat.

  20. Contact angle and droplet heat transfer during evaporation on structured and smooth surfaces of heated wall

    Science.gov (United States)

    Misyura, S. Y.

    2017-08-01

    Water evaporation in a wide range of droplet diameters and wall temperatures on the structured and smooth surfaces were studied experimentally. Linear dependence of evaporation rate (dV/dt) on a droplet radius varies when the volume is greater than 40-60 μl. The static contact angles on the structured surface vary with a droplet diameter for high wall superheating. Dependence of the contact angle on diameter for the corrugated surface is defined by a change in both potential energy barrier U and three-phase contact line tension τcl. This energy barrier for the structured wall changes with an increase in the initial droplet diameter and becomes constant for the large droplets. For high wall superheating, the power in the law of evaporation increases from 1 to 1.45 with an increase in the initial droplet diameter. Depending on the droplet radius, number of droplets and heater length, four different characters of evaporation are realized. Complete droplet evaporation time on structured surface is less than smooth wall. Heat transfer coefficient is greater for structured wall than smooth one. When simulating droplet evaporation and heat transfer, it is necessary to take into account free convection of air and vapor.

  1. Response of two-phase droplets to intense electromagnetic radiation

    Energy Technology Data Exchange (ETDEWEB)

    Spann, J.F. (Morgantown Energy Technology Center, U.S. Department of Energy, P.O. Box 880, Morgantown, West Virginia 26507-0880 (United States)); Maloney, D.J.; Lawson, W.F.; Casleton, K.H. (Morgantown Energy Technology Center, U.S. Department of Energy, P.O. Box 880, Morgantown, West Virginia 26507-0880 (United States))

    1993-04-20

    The response of two-phase droplets to intense radiant heating is studied to determine the incident power that is required for causing explosive boiling in the liquid phase. The droplets studied consist of strongly absorbing coal particles dispersed in a weakly absorbing water medium. Experiments are performed by confining droplets (radii = 37, 55, and 80 [mu]m) electrodynamically and irradiating them from two sides with pulsed laser beams. Emphasis is placed on the transition region from accelerated droplet vaporization to droplet superheating and explosive boiling. The time scale observed for explosive boiling is more than 2 orders of magnitude longer than published values for pure liquids. The delayed response is the result of energy transfer limitations between the absorbing solid phase and the surrounding liquid.

  2. Response of two-phase droplets to intense electromagnetic radiation

    Science.gov (United States)

    Spann, James F.; Maloney, Daniel J.; Lawson, William F.; Casleton, Kent H.

    1993-01-01

    The response of two-phase droplets to intense radiant heating is studied to determine the incident power that is required for causing explosive boiling in the liquid phase. The droplets studied consist of strongly absorbing coal particles dispersed in a weakly absorbing water medium. Experiments are performed by confining droplets (radii of 37, 55, and 80 microns) electrodynamically and irradiating them from two sides with pulsed laser beams. Emphasis is placed on the transition region from accelerated droplet vaporization to droplet superheating and explosive boiling. The time scale observed for explosive boiling is more than 2 orders of magnitude longer than published values for pure liquids. The delayed response is the result of energy transfer limitations between the absorbing solid phase and the surrounding liquid.

  3. The effect of binary oxide materials on a single droplet vapor explosion triggering

    Energy Technology Data Exchange (ETDEWEB)

    Hansson, R.C.; Manickam, L.T.; Dinh, T.N. [Royal Inst. of Tech., Stockholm (Sweden)

    2011-07-01

    In order to explore the fundamental mechanism dictated by the material influence on triggering, fine fragmentation and subsequent vapor explosion energetics, a series of experiments using a mixture of eutectic and non-eutectic binary oxide were initiated. Dynamics of the hot liquid (WO{sub 3}-CaO) droplet and the volatile liquid (water) were investigated in the MISTEE (Micro-Interactions in Steam Explosion Experiments) facility by performing well-controlled, externally triggered, single-droplet experiments, using a high-speed visualization system with synchronized digital cinematography and continuous X-ray radiography, called SHARP (Simultaneous High-speed Acquisition of X-ray Radiography and Photography). The acquired images followed by further analysis showed a milder interaction for the non-eutectic melt composition for the tests with low melt superheat, whether no evident differences between eutectic and non-eutectic melt compositions regarding bubble dynamics, energetics and melt preconditioning was perceived for the high melt superheat tests. (author)

  4. Nucleation and droplet growth from supersaturated vapor at temperatures below the triple point temperature

    CERN Document Server

    Toxvaerd, Søren

    2016-01-01

    In 1897 Ostwald formulated his step rule for formation of the most stable crystal state for a system with crystal polymorphism. The rule describes the irreversible way a system converts to the crystal with lowest free energy. But in fact the irreversible way a supercooled gas below the triple point temperature $T_{tr.p.}$ crystallizes via a liquid droplet is an example of Ostwald's step rule. The homogeneous nucleation in the supersaturated gas is not to a crystal, but to a liquid-like critical nucleus. We have for the first time performed constant energy (NVE) Molecular Dynamics (MD) of homogeneous nucleation without the use of a thermostat. The simulations of homogeneous nucleation in a Lennard-Jones system from supersaturated vapor at temperatures below $T_{tr.p.}$ reveals that the nucleation to a liquid-like critical nucleus is initiated by a small cold cluster [S. Toxvaerd, J. Chem. Phys. \\textbf{143} 154705 (2015)]. The release of latent heat at the subsequent droplet growth increases the temperature in...

  5. Elemental diffusion during the droplet epitaxy growth of In(Ga)As/GaAs(001) quantum dots by metal-organic chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Z. B.; Chen, B.; Wang, Y. B.; Liao, X. Z., E-mail: xiaozhou.liao@sydney.edu.au [School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006 (Australia); Lei, W. [School of Electrical, Electronic and Computer Engineering, The University of Western Australia, Perth, WA 6009 (Australia); Tan, H. H.; Jagadish, C. [Department of Electronic Materials Engineering, Research School of Physics and Engineering, The Australian National University, Canberra, ACT 0200 (Australia); Zou, J. [Materials Engineering and Centre for Microscopy and Microanalysis, The University of Queensland, Brisbane, QLD 4072 (Australia); Ringer, S. P. [School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006 (Australia); Australian Centre for Microscopy and Microanalysis, The University of Sydney, Sydney, NSW 2006 (Australia)

    2014-01-13

    Droplet epitaxy is an important method to produce epitaxial semiconductor quantum dots (QDs). Droplet epitaxy of III-V QDs comprises group III elemental droplet deposition and the droplet crystallization through the introduction of group V elements. Here, we report that, in the droplet epitaxy of InAs/GaAs(001) QDs using metal-organic chemical vapor deposition, significant elemental diffusion from the substrate to In droplets occurs, resulting in the formation of In(Ga)As crystals, before As flux is provided. The supply of As flux suppresses the further elemental diffusion from the substrate and promotes surface migration, leading to large island formation with a low island density.

  6. Melting of superheated molecular crystals

    Science.gov (United States)

    Cubeta, Ulyana; Bhattacharya, Deepanjan; Sadtchenko, Vlad

    2017-07-01

    Melting dynamics of micrometer scale, polycrystalline samples of isobutane, dimethyl ether, methyl benzene, and 2-propanol were investigated by fast scanning calorimetry. When films are superheated with rates in excess of 105 K s-1, the melting process follows zero-order, Arrhenius-like kinetics until approximately half of the sample has transformed. Such kinetics strongly imply that melting progresses into the bulk via a rapidly moving solid-liquid interface that is likely to originate at the sample's surface. Remarkably, the apparent activation energies for the phase transformation are large; all exceed the enthalpy of vaporization of each compound and some exceed it by an order of magnitude. In fact, we find that the crystalline melting kinetics are comparable to the kinetics of dielectric α-relaxation in deeply supercooled liquids. Based on these observations, we conclude that the rate of non-isothermal melting for superheated, low-molecular-weight crystals is limited by constituent diffusion into an abnormally dense, glass-like, non-crystalline phase.

  7. 3D-Printed High-Density Droplet Array Chip for Miniaturized Protein Crystallization Screening under Vapor Diffusion Mode.

    Science.gov (United States)

    Liang, Yi-Ran; Zhu, Li-Na; Gao, Jie; Zhao, Hong-Xia; Zhu, Ying; Ye, Sheng; Fang, Qun

    2017-04-05

    Here we describe the combination of three-dimensional (3D) printed chip and automated microfluidic droplet-based screening techniques for achieving massively parallel, nanoliter-scale protein crystallization screening under vapor diffusion mode. We fabricated high-density microwell array chips for sitting-drop vapor diffusion crystallization utilizing the advantage of the 3D-printing technique in producing high-aspect-ratio chips. To overcome the obstacle of 3D-printed microchips in performing long-term reactions caused by their porousness and gas permeability properties in chip body, we developed a two-step postprocessing method, including paraffin filling and parylene coating, to achieve high sealability and stability. We also developed a simple method especially suitable for controlling the vapor diffusion speed of nanoliter-scale droplets by changing the layer thickness of covering oil. With the above methods, 84 tests of nanoliter-scale protein crystallization under vapor diffusion mode were successfully achieved in the 7 × 12 droplet array chip with a protein consumption of 10 nL for each test, which is 20-100 times lower than that in the conventional large-volume screening system. Such a nanoliter-scale vapor diffusion system was applied to two model proteins with commercial precipitants and displayed advantages over that under microbatch mode. It identified more crystallization conditions, especially for the protein samples with lower concentrations.

  8. A position-sensitive neutron spectrometer/dosimeter based on pressurized superheated drop (bubble) detectors

    Science.gov (United States)

    d'Errico, F.; Nath, R.; Holland, S. K.; Lamba, M.; Patz, S.; Rivard, M. J.

    2002-01-01

    A position-sensitive, superheated emulsion chamber (SEC) is introduced for three-dimensional (3D) spectrometry and dosimetry of fast neutrons. The detector is based on a fine suspension of octafluorocyclobutane droplets emulsified in a tissue-equivalent gel. This gel is highly viscous and immobilizes the bubbles at the location of their formation. At an operating temperature of 35°C, the droplets are moderately superheated and their evaporation is nucleated by the densely ionizing products of fast neutron interactions, with no response to sparsely ionizing radiations. Thus, when a neutron emitter such as a 252Cf brachytherapy source is inserted in the SEC, a bubble distribution forms around the source and makes the neutron field visible. The SEC is operated at different externally applied pressures that correspond to different response thresholds. These responses form a virtually orthogonal matrix which is suitable for spectrometry and allows the use of effective few channel unfolding procedures, yielding the spatial dependence of absorbed dose and neutron energy spectra in-tissue. Bubble spatial distributions in the chamber can be determined through optical tomography or magnetic resonance imaging (MRI). A 3D, steady-state MRI method has proven particularly effective for this purpose. After the imaging, the SEC can be pressurized above the halocarbon vapor tension in order to recondense the bubbles to the liquid phase. Within a few minutes, the device is annealed and ready to be used again for repeated measurements improving the bubble counting statistics.

  9. A position-sensitive neutron spectrometer/dosimeter based on pressurized superheated drop (bubble) detectors

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, F. E-mail: francesco.derrico@yale.edu; Nath, R.; Holland, S.K.; Lamba, M.; Patz, S.; Rivard, M.J

    2002-01-01

    A position-sensitive, superheated emulsion chamber (SEC) is introduced for three-dimensional (3D) spectrometry and dosimetry of fast neutrons. The detector is based on a fine suspension of octafluorocyclobutane droplets emulsified in a tissue-equivalent gel. This gel is highly viscous and immobilizes the bubbles at the location of their formation. At an operating temperature of 35 deg.C, the droplets are moderately superheated and their evaporation is nucleated by the densely ionizing products of fast neutron interactions, with no response to sparsely ionizing radiations. Thus, when a neutron emitter such as a {sup 252}Cf brachytherapy source is inserted in the SEC, a bubble distribution forms around the source and makes the neutron field visible. The SEC is operated at different externally applied pressures that correspond to different response thresholds. These responses form a virtually orthogonal matrix which is suitable for spectrometry and allows the use of effective few channel unfolding procedures, yielding the spatial dependence of absorbed dose and neutron energy spectra in-tissue. Bubble spatial distributions in the chamber can be determined through optical tomography or magnetic resonance imaging (MRI). A 3D, steady-state MRI method has proven particularly effective for this purpose. After the imaging, the SEC can be pressurized above the halocarbon vapor tension in order to recondense the bubbles to the liquid phase. Within a few minutes, the device is annealed and ready to be used again for repeated measurements improving the bubble counting statistics.

  10. Isolating Protein Charge State Reduction in Electrospray Droplets Using Femtosecond Laser Vaporization

    Science.gov (United States)

    Karki, Santosh; Sistani, Habiballah; Archer, Jieutonne J.; Shi, Fengjian; Levis, Robert J.

    2017-01-01

    Charge state distributions are measured using mass spectrometry for both native and denatured cytochrome c and myoglobin after laser vaporization from the solution state into an electrospray (ES) plume consisting of a series of solution additives differing in gas-phase basicity. The charge distribution depends on both the pH of the protein solution prior to laser vaporization and the gas-phase basicity of the solution additive employed in the ES solvent. Cytochrome c (myoglobin) prepared in solutions with pH of 7.0, 2.6, and 2.3 resulted in the average charge state distribution (Zavg) of 7.0 ± 0.1 (8.2 ± 0.1), 9.7 ± 0.2 (14.5 ± 0.3), and 11.6 ± 0.3 (16.4 ± 0.1), respectively, in ammonium formate ES solvent. The charge distribution shifted from higher charge states to lower charge states when the ES solvent contained amines additives with higher gas-phase basicity. In the case of triethyl ammonium formate, Zavg of cytochrome c (myoglobin) prepared in solutions with pH of 7.0, 2.6, and 2.3 decreased to 4.9 (5.7), 7.4 ± 0.2 (9.6 ± 0.3), and 7.9 ± 0.3 (9.8 ± 0.2), respectively. The detection of a charge state distribution corresponding to folded protein after laser vaporized, acid-denatured protein interacts with the ES solvent containing ammonium formate, ammonium acetate, triethyl ammonium formate, and triethyl ammonium acetate suggests that at least a part of protein population folds within the electrospray droplet on a millisecond timescale.

  11. Isolating Protein Charge State Reduction in Electrospray Droplets Using Femtosecond Laser Vaporization

    Science.gov (United States)

    Karki, Santosh; Sistani, Habiballah; Archer, Jieutonne J.; Shi, Fengjian; Levis, Robert J.

    2017-03-01

    Charge state distributions are measured using mass spectrometry for both native and denatured cytochrome c and myoglobin after laser vaporization from the solution state into an electrospray (ES) plume consisting of a series of solution additives differing in gas-phase basicity. The charge distribution depends on both the pH of the protein solution prior to laser vaporization and the gas-phase basicity of the solution additive employed in the ES solvent. Cytochrome c (myoglobin) prepared in solutions with pH of 7.0, 2.6, and 2.3 resulted in the average charge state distribution (Zavg) of 7.0 ± 0.1 (8.2 ± 0.1), 9.7 ± 0.2 (14.5 ± 0.3), and 11.6 ± 0.3 (16.4 ± 0.1), respectively, in ammonium formate ES solvent. The charge distribution shifted from higher charge states to lower charge states when the ES solvent contained amines additives with higher gas-phase basicity. In the case of triethyl ammonium formate, Zavg of cytochrome c (myoglobin) prepared in solutions with pH of 7.0, 2.6, and 2.3 decreased to 4.9 (5.7), 7.4 ± 0.2 (9.6 ± 0.3), and 7.9 ± 0.3 (9.8 ± 0.2), respectively. The detection of a charge state distribution corresponding to folded protein after laser vaporized, acid-denatured protein interacts with the ES solvent containing ammonium formate, ammonium acetate, triethyl ammonium formate, and triethyl ammonium acetate suggests that at least a part of protein population folds within the electrospray droplet on a millisecond timescale.

  12. Superheated drop neutron spectrometer

    CERN Document Server

    Das, M; Roy, B; Roy, S C; Das, Mala

    2000-01-01

    Superheated drops are known to detect neutrons through the nucleation caused by the recoil nuclei produced by the interactions of neutrons with the atoms constituting the superheated liquid molecule. A novel method of finding the neutron energy from the temperature dependence response of SDD has been developed. From the equivalence between the dependence of threshold energy for nucleation on temperature of SDD and the dependence of dE/dx of the recoil ions with the energy of the neutron, a new method of finding the neutron energy spectrum of a polychromatic as well as monochromatic neutron source has been developed.

  13. Neutron - Alpha irradiation response of superheated emulsion detectors

    Science.gov (United States)

    Felizardo, M.; Morlat, T.; Girard, T. A.; Kling, A.; Fernandes, A. C.; Marques, J. G.; Carvalho, F.; Ramos, A. R.

    2017-08-01

    We report new experimental investigations of the response of single superheated emulsion detectors with small droplet (<30 μm radii) size distributions to both α- and neutron irradiations. Analysis of the results in terms of the underlying detector physics yields a toy model which reasonably reproduces the observations, and identifies the initial energy of the α in the liquid and distribution of droplet sizes as primarily responsible for the detector capacity to distinguish between nuclear recoil and α events.

  14. Dynamics of vapor bubbles growth at boiling resulting from enthalpy excess of the surrounding superheated liquid and sound pulses generated by bubbles

    Science.gov (United States)

    Dorofeev, B. M.; Volkova, V. I.

    2016-01-01

    The results of experiments investigating the exponential dependence of the vapor bubble radius on time at saturated boiling are generalized. Three different methods to obtain this dependence are suggested: (1) by the application of the transient heat conduction equation, (2) by using the correlations of energy conservation, and (3) by solving a similar electrodynamic problem. Based on the known experimental data, the accuracy of the dependence up to one percent and a few percent accuracy of its description based on the sound pressure generated by a vapor bubble have been determined. A significant divergence of the power dependence of the vapor bubble radius on time (with an exponent of 1/2) with the experimental results and its inadequacy for the description of the sound pulse generated by the bubble have been demonstrated.

  15. Characterization of Droplets and Vapor Concentration Distributions in Split-Injection Diesel Sprays by Processing UV and Visible Images

    Science.gov (United States)

    Zhang, Yuyin; Nishida, Keiya; Yoshizaki, Takuo

    Recent experimental studies have shown that with split injection strategy, the soot and NOx emissions from a diesel engine can be reduced significantly in comparison with a conventional non-split injection. To understand the mechanism of emissions reduction, it is essential to clarify the process of mixture formation in the diesel spray. For characterizing the droplets and vapor concentration distributions inside a fuel spray, a dual-wavelength laser absorption-scattering technique (LAS) was developed by using the 2nd harmonic (532nm) and the 4th harmonic (266nm) of an Nd: YAG laser and using dimethylnaphthalene as a test fuel. By applying the ultraviolet-visible LAS imaging technique, the distributions of droplets and vapor concentrations in the spray, which was injected into a high-temperature and high-pressure nitrogen ambient in a constant volume vessel by a common-rail diesel injection system, were measured and quantitatively analyzed. The effect of injection mass ratio of double-pulse injections on distributions of equivalence ratios of vapor and droplets in the sprays was examined.

  16. A Numerical Analysis Research on Earlier Behavior of Molten Droplet Covered with Vapor Film at the Stage of Triggering and Propagation in Steam Explosion

    Directory of Open Access Journals (Sweden)

    Mingjun Zhong

    2014-01-01

    Full Text Available When the molten fuel with high temperature falls into the cavity water, it will be dispersed into droplets which are covered with vapor films due to the rapid heat transfer with phase transition. This situation cannot be simply described by liquid-liquid or gas-liquid systems. And there are no sufficient experimental studies on the behavior of droplet covered with vapor film because of the rapid reaction and the difficulty in capture of the film configuration. In this paper, a multiphase code with the volume of fluid (VOF method is used to simulate the earlier behavior of droplet when vapor film exits. The earlier behavior is defined as behavior of the droplet before its disintegration. Thermal effect and pure hydrodynamic effect are, respectively, considered. The simulation results indicate that the film thickness and material density have significant effect on the earlier behavior of droplet. The situation assumed in Ciccarelli and Frost’s model (1994 is observed in current simulation of earlier thermal droplet behavior. The effect of triggering pressure pulse on earlier hydrodynamic behavior is also discussed and it indicates that vapor film has little effect on the hydrodynamic droplet deformation when the intensity of the pressure pulse is very high.

  17. Role of water vapor desublimation in the adhesion of an iced droplet to a superhydrophobic surface.

    Science.gov (United States)

    Boinovich, Ludmila; Emelyanenko, Alexandre M

    2014-10-28

    The study of the adhesion of solid and liquid aqueous phases to superhydrophobic surfaces has become an attractive topic for researchers in various fields as a vital step in the design of icephobic coatings. The analysis of the available results shows that the experimentally measured values of adhesion strength for superhydrophobic substrates, which in some cases are quite small, are still essentially higher than might be expected from the portion of the actual wetted area. In this study we have considered the peculiarities of the three-phase contact zone between sessile supercooled water or ice droplets and a superhydrophobic coating at negative temperatures (below 0 °C) and during the water-ice phase transition. Two types of superhydrophobic coatings with very different textures were used to analyze the evolution of shape parameters of a sessile water droplet during droplet cooling and freezing. It was shown that the evolution of the contact angle and droplet contact diameter of a water droplet deposited on a superhydrophobic surface does not undergo essential changes when the droplet is cooled simultaneously with the substrate and the surrounding environment, and the humidity is maintained close to 100% during the cooling process. However, the phase transition from supercooled water to ice droplets leads to the growth of a metastable iced meniscus and a frost halo in the vicinity of the three-phase contact zone. The meniscus effectively increases the area of adhesive contact between the droplet and the substrate. This phenomenon is intrinsically related to the release of the heat of crystallization and is responsible for the enhancement of adhesion to a superhydrophobic substrate upon droplet transition from supercooled water to ice. At the same time, it was shown that the metastable state of the above meniscus leads to its spontaneous sublimation during exposure at negative temperatures.

  18. A Study on the Violent Interactions of an Immiscible Drop impacting on a Superheated Pool

    KAUST Repository

    Alchalabi, Mohamad

    2014-05-01

    ABSTRACT A Study on the Violent Interactions of an Immiscible Drop Impacting on a Superheated Pool Mohamad Alchalabi The interactions between two immiscible liquids of different temperatures can be violent to the extent of causing harm to individuals, or damage to equipment, especially when used in the industry. Only a few studies investigated these interactions but they could not produce the violent interactions often reported by the industry, and therefore their results did not help much to develop clear understanding of the dynamics of these interactions. In this work, a high speed imaging system operated at 100,000 frames per second was utilized to record the events and phenomena taking place upon the impact of Perfluorohexane droplet at room temperature onto a hot soybean oil pool at temperatures as high as 300 ºC. The impact velocity was varied by varying the height of the droplet before it pinches off under its own weight. The recorded events identified the occurrence of vortex ring vapor explosions, weak and strong nucleate boiling, and film boiling. An impact velocity vs. oil temperature diagram identifying the regions in which each of these phenomena takes place was generated, and the dynamics driving their occurrences were explored. The vortex ring vapor explosions were found to become less violent as the impact velocity was increased, which was attributed to the existence of a smaller amount of liquid Perfluorohexane within the rings at high speed impacts, which does evaporate but does not expand violently. Weak nucleate boiling occurred at very high impact velocities relatively. As the temperature is increased, however, they start 5 turning into strong nucleate boiling. The strong nucleate boiling usually starts right upon impact, and when the temperature of the oil at one impact velocity is increased, it starts turning into film boiling, in which the liquid Perfluorohexane is covered by a vapor layer of its own vapor.

  19. Large scale generation of micro-droplet array by vapor condensation on mesh screen piece

    Science.gov (United States)

    Xie, Jian; Xu, Jinliang; He, Xiaotian; Liu, Qi

    2017-01-01

    We developed a novel micro-droplet array system, which is based on the distinct three dimensional mesh screen structure and sintering and oxidation induced thermal-fluid performance. Mesh screen was sintered on a copper substrate by bonding the two components. Non-uniform residue stress is generated along weft wires, with larger stress on weft wire top location than elsewhere. Oxidation of the sintered package forms micro pits with few nanograsses on weft wire top location, due to the stress corrosion mechanism. Nanograsses grow elsewhere to show hydrophobic behavior. Thus, surface-energy-gradient weft wires are formed. Cooling the structure in a wet air environment nucleates water droplets on weft wire top location, which is more “hydrophilic” than elsewhere. Droplet size is well controlled by substrate temperature, air humidity and cooling time. Because warp wires do not contact copper substrate and there is a larger conductive thermal resistance between warp wire and weft wire, warp wires contribute less to condensation but function as supporting structure. The surface energy analysis of drops along weft wires explains why droplet array can be generated on the mesh screen piece. Because the commercial material is used, the droplet system is cost effective and can be used for large scale utilization.

  20. The efficiency and stability of bubble formation by acoustic vaporization of submicron perfluorocarbon droplets

    NARCIS (Netherlands)

    Reznik, Nikita; Shpak, Oleksandr; Gelderblom, Erik C.; Williams, Ross; Jong, de Nico; Versluis, Michel; Burns, Peter N.

    2013-01-01

    Submicron droplets of liquid perfluorocarbon converted into microbubbles with applied ultrasound have been studied, for a number of years, as potential next generation extravascular ultrasound contrast agents. In this work, we conduct an initial ultra-high-speed optical imaging study to examine the

  1. Effects of Liquid Superheat on Droplet Disruption and Vaporization in Supersonic Conditions

    Science.gov (United States)

    2007-11-02

    studies.’ .- 3 Model Structure The limiting approximation of model is that the droplets are modeled as non - evaporating , rigid spheres. The reason for...of the test fluids vary only slightly, and ethanol has the median density of the three fluids . The Newtonian equation for change in velocity due to... Evaporation at the Superheat Limit," International Journal of Heat and Mass Transfer, Vol. 31, No. 8, 1988, pp. 1687-1988. 14Ried, Robert C

  2. Fragment structure from vapor explosions during the impact of molten metal droplets into a liquid pool

    Science.gov (United States)

    Kouraytem, Nadia; Li, Er Qiang; Vakarelski, Ivan Uriev; Thoroddsen, Sigurdur

    2015-11-01

    High-speed video imaging is used in order to look at the impact of a molten metal drop falling into a liquid pool. The interaction regimes are three: film boiling, nucleate boiling or vapor explosion. Following the vapor explosion, the metal fragments and different textures are observed. It was seen that, using a tin alloy, a porous structure results whereas using a distinctive eutectic metal, Field's metal, micro beads are formed. Different parameters such as the metal type, molten metal temperature, pool surface tension and pool boiling temperature have been altered in order to assess the role they play on the explosion dynamics and the molten metal's by product.

  3. Nucleation and droplet growth from supersaturated vapor at temperatures below the triple point temperature

    DEFF Research Database (Denmark)

    Toxværd, Søren

    2016-01-01

    nucleation without the use of a thermostat. The simulations of homogeneous nucleation in a Lennard-Jones system from supersaturated vapor at temperatures below Ttr.p. reveals that the nucleation to a liquid-like critical nucleus is initiated by a small cold cluster [S. Toxvaerd, J. Chem. Phys. \\textbf{143...

  4. Experimental determination of the retention time of reduced temperature of gas-vapor mixture in trace of water droplets moving in counterflow of combustion products

    Science.gov (United States)

    Volkov, R. S.; Kuznetsov, G. V.; Strizhak, P. A.

    2016-06-01

    We have experimentally studied temporal variation of the temperature of gas-vapor mixture in the trace of water droplets moving in the counterflow of high-temperature combustion products. The initial gas temperature was within 500-950 K. The water droplet radius in the aerosol flow varied from 40 to 400 μm. The motion of water droplets in the counterflow of combustion products in a 1-m-high hollow quartz cylinder with an internal diameter of 20 cm was visualized by optical flow imaging techniques (interferometric particle imaging, shadow photography, particle tracking velocimetry, and particle image velocimetry) with the aid of a cross-correlation complex setup. The scale of temperature decrease in the mixture of combustion products and water droplets was determined for a pulsed (within 1 s) and continuous supply of aerosol with various droplet sizes. Retention times of reduced temperature (relative to the initial level) in trace of water droplets (aerosol temperature trace) are determined. A hypothesis concerning factors responsible for the variation of temperature in the trace of droplets moving in the counterflow of combustion products is experimentally verified.

  5. Superheated emulsions: neutronics and thermodynamics

    Energy Technology Data Exchange (ETDEWEB)

    d`Errico, F. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari]|[Yale Univ., New Haven, CT (United States). School of Medicine; Curzio, G. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari; Nath, R. [Yale Univ., New Haven, CT (United States). School of Medicine; Apfel, R.E. [Yale Univ., New Haven, CT (United States). Dept. of Mechanical Engineering; Dietz, E.; Guldbakke, S.; Siebert, B.R.L. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Egger, E. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Gualdrini, G.F. [ENEA, Bologna (Italy)

    1997-09-01

    The results of some recent theoretical and experimental investigations on the physics of superheated emulsions are presented. Computational fluid thermodynamics allowed for a detailed description of the temporal and spatial history of the energy deposition process by a charged particle in a superheated liquid. Despite the assumptions it is based upon, this model gives information in agreement with experimental data on bubble nucleation. The experimental findings concern the role of interfacial reactions between drops and emulsifier, the existence of inhibition temperatures for the detector`s response, and the progressive sensitisation to protons. (author).

  6. Discrimination of events in superheated liquid

    Science.gov (United States)

    Archambault, Simon

    2010-02-01

    PICASSO is a Dark Matter search experiment using superheated droplets of C4F10 as the active detector material, suspended in an elastic polymer. If a WIMP (Weakly Interacting Massive Particle) hits a nucleus inside a droplet, the recoiling nucleus will deposit its energy in a heat spike, triggering a phase transition. The setup, installed at SNOLab, 2 km underground, consists of 32 cylindrical detectors of 4.5L. The acoustic signals emitted during a phase transition are recorded by nine piezo-electric transducers mounted on the detector walls and the waveforms are analysed offline. In this way, different types of events can be identified using different variables. One of these variables, which is proportional to the total energy of the acoustic signal, allows discrimination among neutron or WIMP-induced events, background alpha particle induced events and electronic noise; another discrimination variable is constructed from the Fast Fourier Transform of the signal and allows the discrimination of other classes of backgrounds. )

  7. Dancing Droplets

    Science.gov (United States)

    Cira, Nate; Prakash, Manu

    2013-11-01

    Inspired by the observation of intricate and beautifully dynamic patterns generated by food coloring on corona treated glass slides, we have investigated the behavior of propylene glycol and water droplets on clean glass surfaces. These droplets exhibit a range of interesting behaviors including long distance attraction or repulsion, and chasing/fleeing upon contact. We present explanations for each of these behaviors, and propose a detailed model for the long distance interactions based on vapor facilitated coupling. Finally we use our understanding to create several novel devices which: passively sort droplets by surface tension, spontaneously align droplets, drive droplets in circles, and cause droplets to bounce on a vertical surface. The simplicity of this system lends it particularly well to application as a toy model for physical systems with force fields and biological systems such as chemotaxis and motility.

  8. Detection in superheated water chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Chienthavorn, O

    1999-11-01

    Superheated water has been used successfully as an eluent in liquid chromatography and has been coupled to various modes of detection, ultraviolet (UV), fluorescence, and nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS). A number of compounds were examined on poly(styrene-divinylbenzene) (PS-DVB), polybutadiene (PBD), and octadecylsilyl bonded silica (ODS) column with isothermal and temperature programmes. The PS-DVB column was mostly used throughout the project as it was the most stable. Not only pure water could serve as superheated water mobile phase; inorganic buffered water and ion-pairing reagent with a concentration of 1-3 mM of the buffer and reagent were also exploited. It was shown that the pH could be controlled during the separation without salt precipitation and the separations followed a conventional reversed-phase HPLC method. Results from fluorescence detection showed good separation of a series of vitamins, such as pyridoxine, riboflavin, thiamine, and some analgesics. The relationship of riboflavin using the detection was linear and the detection limit was seven times higher than that of a conventional method. Simultaneous separation and identification using superheated water chromatography-NMR was demonstrated. With using a stop flow method, NMR spectra of model drugs, namely barbiturates, paracetamol, caffeine and phenacetin were obtained and the results agreed with reference spectra, confirming a perfect separation. A demonstration to obtain COSY spectrum of salicylamide was also performed. The method was expanded to the coupling of superheated water LC to NMR-MS. Results from the hyphenated detection method showed that deuteration and degradation happened in the superheated water conditions. The methyl group hydrogens of pyrimidine ring of sulfonamide and thiamine were exchanged with deuterium. Thiamine was decomposed to 4-methyl-5-thiazoleethanol and both were deuterated under the conditions. (author)

  9. LET dependence of bubbles evaporation pulses in superheated emulsion detectors

    Science.gov (United States)

    Di Fulvio, Angela; Huang, Jean; Staib, Lawrence; d'Errico, Francesco

    2015-06-01

    Superheated emulsion detectors are suspensions of metastable liquid droplets in a compliant inert medium. Upon interaction with ionizing radiation, the droplets evaporate, generating visible bubbles. Bubble expansion associated with the boiling of the droplets is accompanied by pressure pulses in both the sonic and ultrasonic frequency range. In this work, we analyzed the signal generated by bubble evaporation in the frequency and time domain. We used octafluoropropane (R-218) based emulsions, sensitive to both photons and neutrons. The frequency content of the detected pulses appears to extend well into the hundreds of kHz, beyond the range used in commercial devices to count bubbles as they are formed (typically 1-10 kHz). Kilohertz components characterize the early part of the waveforms, potentially containing information about the energetics of the explosive bubble initial growth phase. The power spectral density of the acoustic signal produced by neutron-induced evaporation shows a characteristic frequency pattern in the 200-400 kHz range, which is not observed when bubbles evaporate upon gamma ray-induced irradiation. For practical applications, detection of ultrasonic pulses associated with the boiling of the superheated drops can be exploited as a fast readout method, negligibly affected by mechanical ambient noise.

  10. Dancing Droplets

    CERN Document Server

    Cira, Nate J

    2013-01-01

    Inspired by the observation of intricate and beautifully dynamic patterns generated by food coloring on clean glass slides, we have investigated the behavior of propylene glycol and water droplets on high energy surfaces. In this fluid dynamics video we show a range of interesting behaviors including long distance attraction, and chasing/fleeing upon contact. We present explanations for each of these behaviors including a mechanism for the long distance interactions based on vapor facilitated coupling. Finally we use our understanding to create several novel devices which: spontaneously align droplets, drive droplets in circles, cause droplets to bounce on a vertical surface, and passively sort droplets by surface tension. The simplicity of this system lends it particularly well to application as a toy model for physical systems with force fields and biological systems such as chemotaxis and motility.

  11. Regenerative superheated steam turbine cycles

    Science.gov (United States)

    Fuller, L. C.; Stovall, T. K.

    1980-01-01

    PRESTO computer program was developed to analyze performance of wide range of steam turbine cycles with special attention given to regenerative superheated steam turbine cycles. It can be used to model standard turbine cycles, including such features as process steam extraction, induction and feedwater heating by external sources, peaking, and high back pressure. Expansion line efficiencies, exhaust loss, leakages, mechanical losses, and generator losses are used to calculate cycle heat rate and generator output. Program provides power engineer with flexible aid for design and analysis of steam turbine systems.

  12. Acoustic droplet vaporization

    NARCIS (Netherlands)

    Shpak, O.

    2014-01-01

    Current tumor chemotherapy is associated with severe side effects caused by adverse effects of the drugs on healthy tissue. A local delivery of the drug has the advantage of a more controlled biodistribution of the therapeutic agent, which will reduce the side-effects, and offers the potential to us

  13. Acoustic droplet vaporization

    NARCIS (Netherlands)

    Shpak, O.

    2014-01-01

    Current tumor chemotherapy is associated with severe side effects caused by adverse effects of the drugs on healthy tissue. A local delivery of the drug has the advantage of a more controlled biodistribution of the therapeutic agent, which will reduce the side-effects, and offers the potential to

  14. Fundamental Properties of Superheated Drop (Bubble) Detectors (invited paper)

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, F

    1999-07-01

    Superheated drop detectors and bubble damage detectors find increasing applications in ionising radiation dosimetry and spectrometry. These emulsions of overexpanded halocarbon droplets can be manufactured to respond selectively to densely ionising particles, such as neutron recoils, or to all directly and indirectly ionising radiations. It is shown here that the fundamental properties of the detectors can be predicted by semi-empirical expressions based on the thermal spike theory. A new non-dimensional quantity, defined as 'reduced superheat', is introduced and shown to permit a unified parametrisation of the properties of superheated emulsions. In particular, utilising the reduced superheat concept, it is possible to predict the neutron detection thresholds of the emulsions, their sensitisation to thermal neutrons and to photons, and their ultimate thermodynamic instability. This unified characterisation finds immediate application in the selection of the halocarbons and of the operating conditions most suitable for specific radiation detection problems. Finally, some data are presented which question a direct proportionality between the particle track length contributing to the vaporisation and a critical bubble diameter derived from spontaneous nucleation models. An effective track length based on experimental observations is introduced to derive the minimum track-averaged LET for bubble nucleation expressed as a function of reduced superheat. (author)

  15. Stationary phases for superheated water chromatography

    CERN Document Server

    Saha, S

    2002-01-01

    This project focused on the comparison of conventional liquid chromatography and superheated water chromatography. It examined the differences in efficiency and retention of a range of different stationary phases. Alkyl aryl ketones and eight aromatic compounds were separated on PBD-zirconia, Xterra RP 18, Luna C sub 1 sub 8 (2) and Oasis HLB columns using conventional LC and superheated water chromatography system. The retention indices were determined in the different eluents. On changing the organic component of the eluent from methanol to acetonitrile to superheated water considerable improvements were found in the peak shapes and column efficiencies on the PBD-zirconia and Oasis HLB columns. PS-DVB, PBD-zirconia and Xterra RP 18 columns have been used in efficiency studies. It was found that simply elevating the column temperature did not increase the efficiency of a separation in superheated water chromatography. The efficiency depended on flow rate, injection volume and also mobile phase preheating sys...

  16. Experimental evidence supporting the insensitivity of cloud droplet formation to the mass accommodation coefficient for condensation of water vapor to liquid water

    Science.gov (United States)

    Langridge, Justin M.; Richardson, Mathews S.; Lack, Daniel A.; Murphy, Daniel M.

    2016-06-01

    The mass accommodation coefficient for uptake of water vapor to liquid water, αM, has been constrained using photoacoustic measurements of aqueous absorbing aerosol. Measurements performed over a range of relative humidities and pressures were compared to detailed model calculations treating coupled heat and mass transfer occurring during photoacoustic laser heating cycles. The strengths and weaknesses of this technique are very different to those for droplet growth/evaporation experiments that have typically been applied to these measurements, making this a useful complement to existing studies. Our measurements provide robust evidence that αM is greater than 0.1 for all humidities tested and greater than 0.3 for data obtained at relative humidities greater than 88% where the aerosol surface was most like pure water. These values of αM are above the threshold at which kinetic limitations are expected to impact the activation and growth of aerosol particles in warm cloud formation.

  17. Experimental study of the vaporization of a droplets injection in a fluidized gas-solid media; Etude experimentale de la vaporisation d'un jet de goutelettes au contact d'un milieu gaz-solide fluidise

    Energy Technology Data Exchange (ETDEWEB)

    Leclere, K.

    2002-09-01

    The quality of feedstock injection in the Fluid Catalytic Process (FCC) is essential to ensure a good vaporization. The vaporization should be fast so that the cracking reaction in the gaseous phase can happen within the short residence time in the riser (a few seconds). Vaporization is helped by a uniform injection of droplets as small as possible as well as a good mixing with the catalyst particles that represent the main heat source. Several models were developed to predict the droplet vaporization in a gas-solid media. However, no experimental validation exists for these models, whose predictions vary (from 1 to several hundreds of milliseconds). The objective of this study was to get a better understanding of the physical phenomena taking place during droplet vaporization. This was done in two steps. First, operating limits had to be defined to ensure an optimal vaporization and to avoid local saturation and agglomerate formation. These limits were precisely determined under laboratory conditions to validate a model that showed that agglomeration does not occur under industrial conditions. Then, a kinematic study of vaporization under operating conditions without agglomerate formation was performed. An original measurement technique was developed to get samples at very short times (tens of milliseconds). Experiments showed that heat transfer was not limiting and that mass transfer was the limiting process during vaporization. The developed model was thus based on mass transfer through a boundary layer. The validation of this model in a dense fluidized bed justified its application to operating conditions were the bed voidance is higher. A detailed study of operating parameters will help determine how to improve vaporization. (author)

  18. A Novel Strategy for Simulating the Main Fractionator of Delayed Cokers by Separating the De-superheating Process

    Institute of Scientific and Technical Information of China (English)

    LEI Yang; ZHANG Bingjian; HOU Xiaoqiong; CHEN Qinglin

    2013-01-01

    Delayed coking is an important process in refinery to convert heavy residue oils from crude distillation units (CDUs) and fluid catalytic cracking units (FCCUs) into dry gas,liquefied petroleum gas (LPG),gasoline,diesel,gas oils and cokes.The main fractionator,separating superheating reaction vapors from the coke drums into lighter oil products,involves a de-superheating section and a rectifying section,and couldn't be simulated as a whole column directly because of non-equilibrium in the de-superheating section.It is very important to correctly simulate the main fractionator for operational parameter and energy-use optimization of delayed cokers.This paper discusses the principle of de-superheating processes,and then proposes a new simulation strategy.Some key issues such as composition prediction of the reaction vapors,selection of thermodynamic methods,estimation of tray efficiency,etc.are discussed.The proposed simulation approach is applied to two industrial delayed cokers with typical technological processes in a Chinese refinery by using PRO/II.The simulation results obtained are well consistent with the actual operation data,which indicates that the presented approach is suitable to simulate the main fractionators of delayed cokers or other distillation columns consisting of de-superheating sections and rectifying sections.

  19. Wicking of liquid nitrogen into superheated porous structures

    Science.gov (United States)

    Grebenyuk, Yulia; Dreyer, Michael E.

    2016-09-01

    Evaporation in porous elements of liquid-vapor separation devices can affect the vapor-free cryogenic propellant delivery to spacecraft engines. On that account, the capillary transport of a cryogenic liquid subjected to evaporation needs to be understood and assessed. We investigate wicking of liquid nitrogen at saturation temperature into superheated porous media. A novel test facility was built to perform wicking experiments in a one-species system under non-isothermal conditions. A setup configuration enabled to define the sample superheat by its initial position in a stratified nitrogen vapor environment inside the cryostat. Simultaneous sample weight and temperature measurements indicated the wicking front velocity. The mass of the imbibed liquid nitrogen was determined varying the sample superheat, geometry and porous structure. To the author's extent of knowledge, these are the first wicking experiments performed with cryogenic fluids subjected to evaporation using the weight-time measurement technique. A one-dimensional macroscopic model describes the process theoretically. Results revealed that the liquid loss due to evaporation at high sample superheats leads to only a slight imbibition rate decrease. However, the imbibition rate can be greatly affected by the vapor flow created due to evaporation that counteracts the wicking front propagation.

  20. The Leidenfrost temperature increase for impacting droplets on carbon-nanofiber surfaces.

    Science.gov (United States)

    Nair, Hrudya; Staat, Hendrik J J; Tran, Tuan; van Houselt, Arie; Prosperetti, Andrea; Lohse, Detlef; Sun, Chao

    2014-04-07

    Droplets impacting on a superheated surface can either exhibit a contact boiling regime, in which they make direct contact with the surface and boil violently, or a film boiling regime, in which they remain separated from the surface by their own vapor. The transition from the contact to the film boiling regime depends not only on the temperature of the surface and the kinetic energy of the droplet, but also on the size of the structures fabricated on the surface. Here we experimentally show that surfaces covered with carbon-nanofibers delay the transition to film boiling to much higher temperatures compared to smooth surfaces. We present physical arguments showing that, because of the small scale of the carbon fibers, they are cooled by the vapor flow just before the liquid impact, thus permitting contact boiling up to much higher temperatures than on smooth surfaces. We also show that as long as the impact is in the film boiling regime, the spreading factor of impacting droplets is consistent with the We(3/10) scaling (with We being the Weber number) as predicted for large We by a scaling analysis.

  1. Leidenfrost temperature increase for impacting droplets on carbon-nanofiber surfaces

    CERN Document Server

    Nair, Hrudya; Tran, Tuan; van Houselt, Arie; Prosperetti, Andrea; Lohse, Detlef; Sun, Chao

    2013-01-01

    Droplets impacting on a superheated surface can either exhibit a contact boiling regime, in which they make direct contact with the surface and boil violently, or a film boiling regime, in which they remain separated from the surface by their own vapor. The transition from the contact to the film boiling regime depends not only on the temperature of the surface and kinetic energy of the droplet, but also on the size of the structures fabricated on the surface. Here we experimentally show that surfaces covered with carbon-nanofibers delay the transition to film boiling to much higher temperature compared to smooth surfaces. We present physical arguments showing that, because of the small scale of the carbon fibers, they are cooled by the vapor flow just before the liquid impact, thus permitting contact boiling up to much higher temperatures than on smooth surfaces. We also show that, as long as the impact is in the film boiling regime, the spreading factor of impacting droplets follows the same $\\We^{3/10}$ sc...

  2. Evaporation of Droplets in Plasma Spray-Physical Vapor Deposition Based on Energy Compensation Between Self-Cooling and Plasma Heat Transfer

    Science.gov (United States)

    Liu, Mei-Jun; Zhang, Meng; Zhang, Qiang; Yang, Guan-Jun; Li, Cheng-Xin; Li, Chang-Jiu

    2017-08-01

    In the plasma spray-physical vapor deposition process (PS-PVD), there is no obvious heating to the feedstock powders due to the free molecular flow condition of the open plasma jet. However, this is in contrast to recent experiments in which the molten droplets are transformed into vapor atoms in the open plasma jet. In this work, to better understand the heating process of feedstock powders in the open plasma jet of PS-PVD, an evaporation model of molten ZrO2 is established by examining the heat and mass transfer process of molten ZrO2. The results reveal that the heat flux in PS-PVD open plasma jet (about 106 W/m2) is smaller than that in the plasma torch nozzle (about 108 W/m2). However, the flying distance of molten ZrO2 in the open plasma jet is much longer than that in the plasma torch nozzle, so the heating in the open plasma jet cannot be ignored. The results of the evaporation model show that the molten ZrO2 can be partly evaporated by self-cooling, whereas the molten ZrO2 with a diameter heat transfer.

  3. Research progress of the Superheated Steam Drying Technology

    OpenAIRE

    Shi, Yongchun; Li, Jie; Li, Xuanyou; Zhao, Gaiju; Wu, Maogang

    2012-01-01

    The superheated steam drying technology has lots of advantages such as safe, energy-saving, pollution-free and so on, so it causes more and more extensive concern. The superheated steam drying technology is introduced and its merits and faults are analyzed. The theoretical research progress of the superheated steam drying is summarized and the recent application of the materials including the food, wood, paper, sludge and lignite is stated. In brief, the superheated steam drying technol...

  4. Explosive Boiling of Superheated Cryogenic Liquids

    CERN Document Server

    Baidakov, V G

    2007-01-01

    The monograph is devoted to the description of the kinetics of spontaneous boiling of superheated liquefied gases and their solutions. Experimental results are given on the temperature of accessible superheating, the limits of tensile strength of liquids due to processes of cavitation and the rates of nucleation of classical and quantum liquids. The kinetics of evolution of the gas phase is studied in detail for solutions of cryogenic liquids and gas-saturated fluids. The properties of the critical clusters (bubbles of critical sizes) of the newly evolving gas phase are analyzed for initial st

  5. INTEGRATION OF SCIENTIFIC AND EDUCATIONAL UNIVERSITY WORK: EXPERIENCE OF COMPARATIVE ANALYSIS OF THE THERMAL DECOMPOSITION OF Mg(NO32 · 6H2O IN AIR AND SUPERHEATED WATER VAPOR

    Directory of Open Access Journals (Sweden)

    Sergey F. Katyshev

    2016-01-01

    Full Text Available Abstract. The aim of the investigation is to select how the thermal decomposition of crystallohydrate magnesium nitrates to capture the nitrogen compounds that are harmful to the environment; for the return of nitric acid to the initial stage of the process. Methods. The methods involve physical and chemical analysis (IR spectroscopy, rentgennofazovy analysis, thermolysis and thermal hydrolysis of magnesium nitrate. Results. Magnitudes of thermal effects are determined; mechanisms of thermal decomposition of magnesium nitrate in air and overheated water vapor are posed. Thermohydrolysis renders possible to produce undiluted magnesium oxide and regenerate nitric acid. Scientific novelty. Undiluted magnesium oxide was produced by the method that requires less energy consumption. Practical significance. The research results on regeneration of nitric acid and its reuse in the raw material processing containing magnesium open new prospects for production and can be applied as course materials for a practical training in organic chemistry in postgraduate study on chemical specialties. 

  6. Evolution of acoustically vaporized microdroplets in gas embolotherapy

    KAUST Repository

    Qamar, Adnan

    2012-01-01

    Acoustic vaporization dynamics of a superheated dodecafluoropentane (DDFP) microdroplet inside a microtube and the resulting bubble evolution is investigated in the present work. This work is motivated by a developmental gas embolotherapy technique that is intended to treat cancers by infarcting tumors using gas bubbles. A combined theoretical and computational approach is utilized and compared with the experiments to understand the evolution process and to estimate the resulting stress distribution associated with vaporization event. The transient bubble growth is first studied by ultra-high speed imaging and then theoretical and computational modeling is used to predict the entire bubble evolution process. The evolution process consists of three regimes: an initial linear rapid spherical growth followed by a linear compressed oval shaped growth and finally a slow asymptotic nonlinear spherical bubble growth. Although the droplets are small compared to the tube diameter, the bubble evolution is influenced by the tube wall. The final bubble radius is found to scale linearly with the initial droplet radius and is approximately five times the initial droplet radius. A short pressure pulse with amplitude almost twice as that of ambient conditions is observed. The width of this pressure pulse increases with increasing droplet size whereas the amplitude is weakly dependent. Although the rise in shear stress along the tube wall is found to be under peak physiological limits, the shear stress amplitude is found to be more prominently influenced by the initial droplet size. The role of viscous dissipation along the tube wall and ambient bulk fluid pressure is found to be significant in bubble evolution dynamics. © 2012 American Society of Mechanical Engineers.

  7. Evolution of acoustically vaporized microdroplets in gas embolotherapy.

    Science.gov (United States)

    Qamar, Adnan; Wong, Zheng Z; Fowlkes, J Brian; Bull, Joseph L

    2012-03-01

    Acoustic vaporization dynamics of a superheated dodecafluoropentane (DDFP) microdroplet inside a microtube and the resulting bubble evolution is investigated in the present work. This work is motivated by a developmental gas embolotherapy technique that is intended to treat cancers by infarcting tumors using gas bubbles. A combined theoretical and computational approach is utilized and compared with the experiments to understand the evolution process and to estimate the resulting stress distribution associated with vaporization event. The transient bubble growth is first studied by ultra-high speed imaging and then theoretical and computational modeling is used to predict the entire bubble evolution process. The evolution process consists of three regimes: an initial linear rapid spherical growth followed by a linear compressed oval shaped growth and finally a slow asymptotic nonlinear spherical bubble growth. Although the droplets are small compared to the tube diameter, the bubble evolution is influenced by the tube wall. The final bubble radius is found to scale linearly with the initial droplet radius and is approximately five times the initial droplet radius. A short pressure pulse with amplitude almost twice as that of ambient conditions is observed. The width of this pressure pulse increases with increasing droplet size whereas the amplitude is weakly dependent. Although the rise in shear stress along the tube wall is found to be under peak physiological limits, the shear stress amplitude is found to be more prominently influenced by the initial droplet size. The role of viscous dissipation along the tube wall and ambient bulk fluid pressure is found to be significant in bubble evolution dynamics.

  8. Multi-Scale Computational Analyses of JP-8 Fuel Droplets and Vapors in Human Respiratory Airway Models

    Science.gov (United States)

    2007-10-31

    Deposition Clearance and Effects in the Lung 20, 294-309. Kleinstreuer, C., Zhang, Z., 2003. Laminar-to-turbulent fluid-particle flows in a human airway ...FA9550-04-1-0422 Vapors in Human Respiratory Airway Models 5b. GRANT NUMBER Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Kleinstreuer...tracheobronchial airway models, transient 3- D as well as equivalent steady-state solutions have been obtained for the transport and deposition of

  9. Standardisation of superheated drop and bubble detectors

    Energy Technology Data Exchange (ETDEWEB)

    Vanhavere, F.; D' Errico, F

    2002-07-01

    This study presents an analysis of the commercially available superheated drop detectors and bubble detectors, performed in substantial accordance with the guidelines developed by the International Organisation for Standardization (ISO). The analysis was performed in terms of linearity, reproducibility, ageing, minimum detection thresholds, energy and angular dependence of the response and the influence of various climatic conditions. (author)

  10. Droplet turbulence interactions under subcritical and supercritical conditions

    Science.gov (United States)

    Coy, E. B.; Greenfield, S. C.; Ondas, M. S.; Song, Y.-H.; Spegar, T. D.; Santavicca, D. A.

    1993-01-01

    The goal of this research is to experimentally characterize the behavior of droplets in vaporizing liquid sprays under conditions typical of those encountered in high pressure combustion systems such as liquid fueled rocket engines. Of particular interest are measurements of droplet drag, droplet heating, droplet vaporization, droplet distortion, and secondary droplet breakup, under both subcritical and supercritical conditions. The paper presents a brief description of the specific accomplishments which have been made over the past year.

  11. Status of Superheated Spray and Post Combustor Particulate Modeling for NCC

    Science.gov (United States)

    Liu, Nan-Suey; Raju, Suri; Wey, Thomas

    2007-01-01

    At supersonic cruise conditions, high fuel temperatures, coupled with low pressures in the combustor, create potential for superheated fuel injection leading to shorter fuel jet break-up time and reduced spray penetration. Another issue particularly important to the supersonic cruise is the aircraft emissions contributing to the climate change in the atmosphere. Needless to say, aircraft emissions in general also contribute to the air pollution in the neighborhood of airports. The objectives of the present efforts are to establish baseline for prediction methods and experimental data for (a) liquid fuel atomization and vaporization at superheated conditions and (b) particle sampling systems and laboratory or engine testing environments, as well as to document current capabilities and identify gaps for future research.

  12. Rewetting of a low superheated rod with saturated water

    Energy Technology Data Exchange (ETDEWEB)

    Portillo, O.; Reyes, R.; Wayner, P.C. Jr.

    1999-07-01

    The study of the rewetting of a superheated surface has application in several technological fields. It is related to the control mechanism for loss of coolant accident (LOCA) in nuclear reactors. An adsorption model as the precursory mechanism for rewetting of a superheated surface is extended from its application to non-polar liquids to a polar fluid, and modeling calculations are compared with experimental data found in the literature. The adsorption model is based on interfacial forces acting at the tip of the rewetting front, the three-phase region. In this region, solid, liquid and vapor interfaces generate a contact angle that depends on the degree of superheat and describes the velocity of rewetting. The contact angle is a function of interfacial forces calculated through the disjoining pressure of the adsorbed film precursory of the rewetting. The influences of van der Waals and electrostatic intermolecular forces in the film thickness are analyzed. The authors find that the order of magnitude of the film thickness in the controlling region is of a few angstroms: thus, only van der Waals intermolecular forces define the interactions. For the prediction of the velocity of rewetting the temperature profile along the rod's surface is required and a one-dimensional and a two-dimensional heat conduction balances are solved. The thermophysical properties in the adsorption model are predicted by ASPEN PLUS data bank and from ASME steam tables. Variations of the predicted values have a strong influence on the results. The surface boundary condition on the rod contains an evaporative heat transfer coefficient that is calculated from the fitted experimental rewetting velocities and the two-dimensional temperature field in the rod. Using this calculation scheme the values of the evaporative heat transfer coefficient are obtained in the normal range of values. Therefore the adsorption model gives results that are consistent with experimental observations.

  13. A superheated Bose-condensed gas

    OpenAIRE

    Gaunt, Alexander L.; Fletcher, Richard J.; Robert P. Smith; Hadzibabic, Zoran

    2012-01-01

    Our understanding of various states of matter usually relies on the assumption of thermodynamic equilibrium. However, the transitions between different phases of matter can be strongly affected by non-equilibrium phenomena. Here we demonstrate and explain an example of non-equilibrium stalling of a continuous, second-order phase transition. We create a superheated atomic Bose gas, in which a Bose-Einstein condensate (BEC) persists above the equilibrium critical temperature, $T_c$, if its coup...

  14. Electronic neutron personal dosimetry with superheated drop detectors

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, F.; Apfel, R.E.; Curzio, G.; Nath, R

    2001-07-01

    The prototype of an electronic personal neutron dosemeter based on superheated drop detectors is presented. This battery operated device comprises a neutron sensor, bubble-counting electronics and a temperature controller ensuring an optimal dose equivalent response. The neutron sensor is a 12 ml detector vial containing an emulsion of about 50,000 halocarbon-12 droplets of 100 {mu}m diameter. The temperature controller is a low-power, solid-state device stabilising the emulsion at 31.5 deg. C by means of an etched foil heater. The microprocessor-controlled counting electronics relies on a double piezo-electric transducer configuration to record bubble formation acoustically via a comparative pulse-shape analysis of ambient noise and detector signals. The performance of the dosemeter was analysed in terms of the requirements presently developed for neutron personal dosemeters. The detection threshold is about 1 {mu}Sv, while the personal dose equivalent response to neutrons in the thermal to 62 MeV range falls within a factor 1.6 of 13 bubbles per {mu}Sv. (author)

  15. Active neutron spectrometry with superheated drop (bubble) detectors

    Energy Technology Data Exchange (ETDEWEB)

    d`Errico, F.; Curzio, G. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari]|[Istituto Nazionale di Fisica Nucleare, Pisa (Italy); Alberts, W.G.; Guldbakke, S.; Kluge, H.; Matzke, M. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

    1995-12-31

    A new approach to neutron spectrometry has been developed in a joint project by DCMN Pisa and PTB Braunschweig. The system relies on the use of superheated drop (bubble) detectors and the thermodynamic control of their detection thresholds. This is the result of investigations into the physics of these detectors combined with extensive experimental work on their response to neutrons. These studies indicate that the higher the degree of superheat of a detector, the lower the minimum energy that secondary charged particles, and therefore primary neutrons, must impart to the droplets in order to nucleate their evaporation. Therefore, by controlling the temperature of the detectors, accurately defined detection thresholds, virtually any desired one, can be generated in the 0.01-10 MeV neutron energy range. An active prototype instrument has been developed: bubbles are counted acoustically and temperature regulation is achieved by means of thin heating strips. Tests with reference neutron spectra show that the system is suitable for few-channel spectrometry and may be useful for radiation protection dosimetry. Appropriate unfolding algorithms are currently investigated, to be ultimately implemented in an automatic device. (author).

  16. Low-intensity focused ultrasound (LIFU-induced acoustic droplet vaporization in phase-transition perfluoropentane nanodroplets modified by folate for ultrasound molecular imaging

    Directory of Open Access Journals (Sweden)

    Liu J

    2017-01-01

    Full Text Available Jianxin Liu,1,* Tingting Shang,1,* Fengjuan Wang,1 Yang Cao,1 Lan Hao,1 JianLi Ren,1,2 Haitao Ran,1,2 Zhigang Wang,1,2 Pan Li,1,2 Zhiyu Du3 1Chongqing Key Laboratory of Ultrasound Molecular Imaging, 2Department of Ultrasound, 3Postgraduate Department, The Second Affiliated Hospital of Chongqing Medical University, Chongqing, People’s Republic of China *These authors contributed equally to this work Abstract: The commonly used ultrasound (US molecular probes, such as targeted microbubbles and perfluorocarbon emulsions, present a number of inherent problems including the conflict between US visualization and particle penetration. This study describes the successful fabrication of phase changeable folate-targeted perfluoropentane nanodroplets (termed FA-NDs, a novel US molecular probe for tumor molecular imaging with US. Notably, these FA-NDs can be triggered by low-intensity focused US (LIFU sonication, providing excellent US enhancement in B-mode and contrast-enhanced US mode in vitro. After intravenous administration into nude mice bearing SKOV3 ovarian carcinomas, 1,1'-dioctadecyl-3,3,3',3' -tetramethylindotricarbocyanine iodide-labeled FA-NDs were found to accumulate in the tumor region. FA-NDs injection followed by LIFU sonication exhibited remarkable US contrast enhancement in the tumor region. In conclusion, combining our elaborately developed FA-NDs with LIFU sonication provides a potential protocol for US molecular imaging in folate receptor-overexpressing tumors. Keywords: low-intensity focused ultrasound, perfluoropentane nanodroplets, acoustic droplet vaporization, ultrasound molecular imaging, targeting

  17. Capillary droplets on Leidenfrost micro-ratchets

    CERN Document Server

    Marin, Alvaro G; Römer, Gertwillem R B E; Pathiraj, B; Veld, Albertus Huis in 't; Lohse, Detlef

    2012-01-01

    Leidenfrost ratchets are structures with the ability of transporting liquid droplets when heated over the critical Leidenfrost temperature. Once this temperature is reached, the droplet levitates over the surface and moves in the direction marked by the slope of the ratchet at terminal velocities around 10 cm/s. Here we provide new experiments with micron-sized ratchets, which have been produced with picosecond pulse laser ablation. In the following work, we use a simple method to measure the thrust driving droplets of capillary size over the micro-ratchets. The mechanism responsible for the force acting on the drop on superheated ratchets has been recently under debate. We extend the recently proposed 'viscous mechanism' proposed by Dupeaux et al. [Europhys. Lett., 96, 58001 (2011)] to capillary droplets and find good agreement with our measurements.

  18. Dark matter searches using superheated liquids

    Science.gov (United States)

    Manuel, Bou-Cabo; Miguel, Ardid; Ivan, Felis

    2016-07-01

    Direct detection of dark matter is one of the most important topics in modern physics. It is estimated that 22% of universe matter is composed by dark matter in front of 0.4% of ordinary matter like stars, galaxies planets and all kind of known astrophysical objects. Several kinds of experiments are nowadays involved in detection of one of the more accepted particle candidates to be dark matter: WIMPs (Weakly Interacting Massive Particles). These detectors, using several kinds of techniques: Cryogenic semiconductors, scintillation materials like I Na or noble gas chambers among others, are reporting very interesting but inconclusive results. In this paper a review of detectors that are using the superheated liquid technique in bubble chambers in order to detect WIMPs is reported. Basically, we will report about Coupp (Chicagoland observatory for underground particle physics), PICO that is composed by Coupp and Picasso researchers having the aim to build a ton experiment and also about a new detector named MOSCAB (Materia oscura a bolle) that recently published a first results of a test chamber that uses also superheated liquid technique but as a Geyser chamber.

  19. Dark matter searches using superheated liquids

    Directory of Open Access Journals (Sweden)

    Manuel Bou-Cabo

    2016-01-01

    Full Text Available Direct detection of dark matter is one of the most important topics in modern physics. It is estimated that 22% of universe matter is composed by dark matter in front of 0.4% of ordinary matter like stars, galaxies planets and all kind of known astrophysical objects. Several kinds of experiments are nowadays involved in detection of one of the more accepted particle candidates to be dark matter: WIMPs (Weakly Interacting Massive Particles. These detectors, using several kinds of techniques: Cryogenic semiconductors, scintillation materials like I Na or noble gas chambers among others, are reporting very interesting but inconclusive results. In this paper a review of detectors that are using the superheated liquid technique in bubble chambers in order to detect WIMPs is reported. Basically, we will report about Coupp (Chicagoland observatory for underground particle physics, PICO that is composed by Coupp and Picasso researchers having the aim to build a ton experiment and also about a new detector named MOSCAB (Materia oscura a bolle that recently published a first results of a test chamber that uses also superheated liquid technique but as a Geyser chamber.

  20. Current status of droplet evaporation in turbulent flows

    Energy Technology Data Exchange (ETDEWEB)

    Birouk, Madjid [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, MB (Canada); Goekalp, Iskender [Laboratoire de Combustion et Systemes Reactifs, Centre National de la Recherche Scientifique, 45071 Orleans Cedex 2 (France)

    2006-07-01

    This article reviews the available literature results concerning the effects of turbulence on the transport (heat and mass transfer) rates from a droplet. The survey emphasizes recent findings related specifically to physical models and correlations for predicting turbulence effects on the vaporization rate of a droplet. In addition, several research challenges on the vaporization of fuel droplets in turbulent flow environments are outlined. (author)

  1. Significance of droplet-droplet interactions in droplet streams: Atmospheric to supercritical conditions

    Science.gov (United States)

    Connon, Corinne Shirley

    In an effort to optimize liquid fuel combustion a considerable amount of research has been directed towards the atomization of large liquid masses into small droplets to increase the surface area available for vaporization. The current work uses a single linear array of moving droplets of uniform size and spacing to investigate the behavior of interacting droplets. A series of experiments, over a range of ambient conditions, demonstrate how a lead droplet alters the environment experienced by its trailing neighbor. This behavior is of particular interest for droplet groups under high pressure and temperature, where experimental data has been limited. Gas phase velocity and vapor concentration measurements show that as the space between adjacent droplets decreases entrainment of fluid towards the axis of motion is reduced. Trapped gases create a gaseous cylinder, composed of ambient gas and fuel vapor, which surrounds and moves with the droplet stream. As ambient pressure increase, the oscillatory behavior of the lead droplet wake begins to interfere with its trailing neighbor. Loss of stream stability and enhanced droplet stripping in part result from these oscillating wakes. However, acceleration of droplet stripping is mainly produced by liquid and gas density similarity, which increases the centrifugal stress and the growth rate of capillary waves. Further, injection of subcritical droplets into an ambient environment at temperatures and pressures above the liquid droplet critical point shows behavior not greatly different from the results obtained at high ambient pressures. The similarity results from thermal heatup times exceeding the breakup times generated from the severe aerodynamics encountered at high ambient density and high liquid-gas relative velocities.

  2. Superheating of ice crystals in antifreeze protein solutions

    OpenAIRE

    Celik, Yeliz; Graham, Laurie A.; Mok, Yee-Foong; Bar, Maya; Davies, Peter L.; Braslavsky, Ido

    2010-01-01

    It has been argued that for antifreeze proteins (AFPs) to stop ice crystal growth, they must irreversibly bind to the ice surface. Surface-adsorbed AFPs should also prevent ice from melting, but to date this has been demonstrated only in a qualitative manner. Here we present the first quantitative measurements of superheating of ice in AFP solutions. Superheated ice crystals were stable for hours above their equilibrium melting point, and the maximum superheating obtained was 0.44 °C. When me...

  3. Determination of the Accomodation Coefficient Using Vapor/Gas Bubble Dynamics in an Acoustic Field

    Science.gov (United States)

    Gumerov, Nail A.

    1999-01-01

    Non-equilibrium liquid/vapor phase transformations can occur in superheated or subcooled liquids in fast processes such as in evaporation in a vacuum, in processing of molten metals, and in vapor explosions. The rate at which such a phase transformation occurs, Xi, can be described by the Hertz-Knudsen-Langmuir formula. More than one century of the history of the accommodation coefficient measurements shows many problems with its determination. This coefficient depends on the temperature, is sensitive to the conditions at the interface, and is influenced by small amounts of impurities. Even recent measurements of the accommodation coefficient for water (Hagen et al, 1989) showed a huge variation in Beta from 1 for 1 micron droplets to 0.006 for 15 micron droplets. Moreover, existing measurement techniques for the accommodation coefficient are complex and expensive. Thus development of a relatively inexpensive and reliable technique for measurement of the accommodation coefficient for a wide range of substances and temperatures is of great practical importance.

  4. Advances in superheated drop (bubble) detector techniques

    Energy Technology Data Exchange (ETDEWEB)

    d`Errico, F. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari; Alberts, W.G.; Matzke, M. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

    1997-09-01

    State-of-the-art neutron dosemeters based on superheated drop (bubble) detectors are described. These are either active systems for area monitoring, which rely on the acoustical recording of drop vaporisations, or passive pen size ones for personal dosimetry, based on optical bubble counting. The technological solutions developed for the construction of robust devices for health physics applications are described with special emphasis on methods adopted to reduce mechanical shock and temperature sensitivity of the detectors. Finally, a review is given of some current research activities. In particular, a new approach to neutron spectrometry is presented which relies on the thermal effects for the definition of the response matrix of the system. (author).

  5. Nonequilibrium vapor-generation model for flashing flows

    Energy Technology Data Exchange (ETDEWEB)

    Saha, P.; Abuaf, N.; Wu, B. J.C.

    1981-01-01

    A nonequilibrium vapor generation model for flashing flows is presented. The model consists of a flashing inception point, a bubbly flow regime followed by a bubbly-slug regime, an annular or annular-mist regime, and finally a dispersed-droplet regime. Existence of superheated liquid at the inception point and beyond is recognized. The vapor generation rate in each flow regime is calculated from the estimates for interfacial area density and net interfacial heat flux. However, the bubble number density at the flashing inception point was varied to obtain optimum fits with the void fraction data taken in a vertical converging-diverging nozzle. The interfacial area density at the inception point, thus determined, showed a rapid increase with the decrease in the liquid superheat at that point. This trend is correct since in the limit of thermal equilibrium flow where the liquid superheat approaches zero, the interfacial area for heat and mass transfer should approach infinity. 32 refs., 7 figs., 1 tab.

  6. Superheating in linear polymers studied by ultrafast nanocalorimetry.

    Science.gov (United States)

    Minakov, A A; Wurm, A; Schick, C

    2007-05-01

    To study phase transition kinetics on submillisecond time scale a sensitive ultrafast nanocalorimeter was constructed. Controlled ultrafast cooling, as well as heating, up to 10(6) K/s was attained. The method was applied for the measurements of the superheating phenomenon in a set of linear polymers: iPS, PBT, PET, and iPP. A power law relation between the superheating and the heating rate holds in the heating rate range 10(-2) - 10(4) K/s. A limiting superheating of about 10% of the melting temperature was observed at rates above 10(4) - 10(5) K/s. This limit depends on annealing conditions before sample melting. The observed superheating limit, as well as the power law, can be accounted for the internal stresses near the crystalline amorphous interface in semicrystalline polymers induced by heating, which are related to the thermal expansion gradients inherent in a semicrystalline material.

  7. Leidenfrost droplets in an electric field

    Science.gov (United States)

    Wildeman, Sander; Sun, Chao; Lohse, Detlef

    2014-11-01

    In a recent video broadcast dubbed the ``Knitting Needle Experiment,'' astronaut Don Petit aboard the ISS demonstrated how weightless water droplets can be made to orbit a statically charged Teflon rod. We study the earthly analogue of mobile droplets in an electric field, whereby the mobility is ensured by a thin vapor film sustained between the droplet and a hot plate (the Leidenfrost effect). We find that in a strong vertical electric field the droplet starts to bounce progressively higher, defying gravitational attraction. From its trajectory we can deduce the temporal evolution of the charge on the droplet. The measurements show that the charge starts high and then decreases in a step-like manner as the droplet evaporates. The discharge trend is predicted well by treating the droplet as a dielectric sphere in electrical contact with the hot plate, but the mechanism by which definite lumps of charge are transferred through the vapor film is still an open question.

  8. Heat treatment of scallop adductor muscle using superheated steam.

    Science.gov (United States)

    Abe, T; Miyashita, K

    2007-08-01

    Scallop (Patinopecten yessoensis) adductor muscles were heated using superheated steam (150 and 200 degrees C), boiling (98 degrees C), and normal steaming (95 degrees C). The amounts of amino acids, water-soluble peptides, and nucleotides, expressed as extractive nitrogen in scallop products, are very important elements of quality and taste. After 15-min heating of scallop muscles with normal steaming and boiling, respective losses of 50% and 64% of the extractive nitrogen were observed. However, most extractive nitrogen (> 86%) remained in the scallop muscles treated with superheated steam at 150 and 200 degrees C. Protective effects of superheated steam against elution loss of nitrogen compounds were also observed in amino acid analyses of the heated products. The scallop-muscle surface temperature during treatment with superheated steam increased more quickly than that with normal steaming and boiling. The rapid water loss and the surface protein denaturation engendered formation of a 30-mum-thick film covering the surface, which prevented extractive nitrogen loss from internal tissues. Superheated steam treatment at 200 degrees C caused browning, surface shrinkage, and 47% weight loss. In marked contrast, the appearance and the weight loss of sample treated at 150 degrees C were almost the same as those of normal steaming and boiling-treated samples. These results suggested that superheated steaming at 150 degrees C is an optimal heat treatment of scallop adductor muscles.

  9. Binary Schemes of Vapor Bubble Growth

    Science.gov (United States)

    Zudin, Yu. B.

    2015-05-01

    A problem on spherically symmetric growth of a vapor bubble in an infi nite volume of a uniformly superheated liquid is considered. A description of the limiting schemes of bubble growth is presented. A binary inertial-thermal bubble growth scheme characterized by such specifi c features as the "three quarters" growth law and the effect of "pressure blocking" in a vapor phase is considered.

  10. Development of a model for spray evaporation based on droplet analysis

    KAUST Repository

    Chen, Q.

    2016-08-20

    Extreme flash evaporation occurs when superheated liquid is sprayed into a low pressure zone. This method has high potential to improve the performance of thermally-driven desalination plants. To enable a more in-depth understanding on flash evaporation of a superheated feed water spray, a theoretical model has been developed with key considerations given to droplet motion and droplet size distribution. The model has been validated against 14 experimental data sets from literature sources to within 12% discrepancy. This model is capable of accurately predicting the water productivity and thermal efficiency of existing spray evaporator under specific operating conditions. Employing this model, the effect of several design parameters on system performance was investigated. Key results revealed that smaller droplet enabled faster evaporation process while higher initial droplet velocity promoted water productivity. Thermal utilization marginally changes with the degree of superheat, which renders a quick design calculation of the brine temperature without the need for iterations. © 2016 Elsevier B.V.

  11. Boiler for generating high quality vapor

    Science.gov (United States)

    Gray, V. H.; Marto, P. J.; Joslyn, A. W.

    1972-01-01

    Boiler supplies vapor for use in turbines by imparting a high angular velocity to the liquid annulus in heated rotating drum. Drum boiler provides a sharp interface between boiling liquid and vapor, thereby, inhibiting the formation of unwanted liquid droplets.

  12. The effects of turbulence on droplet drag and secondary droplet breakup

    Science.gov (United States)

    Song, Y.-H.; Coy, E.; Greenfield, S.; Ondas, M.; Prevish, T.; Spegar, T.; Santavicca, D.

    1994-01-01

    The objective of this research is to obtain an improved understanding of the behavior of droplets in vaporizing sprays, particularly under conditions typical of those in high pressure rocket sprays. Experiments are conducted in a variety of high pressure, high temperature, optically-accessible flow systems, including one which is capable of operation at pressures up to 70 atm, temperatures up to 600 K, gas velocities up to 30 m/sec and turbulence intensities up to 40 percent. Single droplets, 50 to 500 micron in diameter, are produced by an aerodynamic droplet generator and transversely injected into the flow. Measurements are made of the droplet position, size, velocity and temperature and of the droplet's vapor wake from which droplet drag, dispersion, heating, vaporization and breakup are characterized.

  13. Superheating of ice crystals in antifreeze protein solutions

    Science.gov (United States)

    Celik, Yeliz; Graham, Laurie A.; Mok, Yee-Foong; Bar, Maya; Davies, Peter L.; Braslavsky, Ido

    2010-01-01

    It has been argued that for antifreeze proteins (AFPs) to stop ice crystal growth, they must irreversibly bind to the ice surface. Surface-adsorbed AFPs should also prevent ice from melting, but to date this has been demonstrated only in a qualitative manner. Here we present the first quantitative measurements of superheating of ice in AFP solutions. Superheated ice crystals were stable for hours above their equilibrium melting point, and the maximum superheating obtained was 0.44 °C. When melting commenced in this superheated regime, rapid melting of the crystals from a point on the surface was observed. This increase in melting temperature was more appreciable for hyperactive AFPs compared to the AFPs with moderate antifreeze activity. For each of the AFP solutions that exhibited superheating, the enhancement of the melting temperature was far smaller than the depression of the freezing temperature. The present findings clearly show that AFPs adsorb to ice surfaces as part of their mechanism of action, and this absorption leads to protection of ice against melting as well as freezing. PMID:20215465

  14. Superheating of ice crystals in antifreeze protein solutions.

    Science.gov (United States)

    Celik, Yeliz; Graham, Laurie A; Mok, Yee-Foong; Bar, Maya; Davies, Peter L; Braslavsky, Ido

    2010-03-23

    It has been argued that for antifreeze proteins (AFPs) to stop ice crystal growth, they must irreversibly bind to the ice surface. Surface-adsorbed AFPs should also prevent ice from melting, but to date this has been demonstrated only in a qualitative manner. Here we present the first quantitative measurements of superheating of ice in AFP solutions. Superheated ice crystals were stable for hours above their equilibrium melting point, and the maximum superheating obtained was 0.44 degrees C. When melting commenced in this superheated regime, rapid melting of the crystals from a point on the surface was observed. This increase in melting temperature was more appreciable for hyperactive AFPs compared to the AFPs with moderate antifreeze activity. For each of the AFP solutions that exhibited superheating, the enhancement of the melting temperature was far smaller than the depression of the freezing temperature. The present findings clearly show that AFPs adsorb to ice surfaces as part of their mechanism of action, and this absorption leads to protection of ice against melting as well as freezing.

  15. Supercritical droplet combustion and related transport phenomena

    Science.gov (United States)

    Yang, Vigor; Hsieh, K. C.; Shuen, J. S.

    1993-01-01

    An overview of recent advances in theoretical analyses of supercritical droplet vaporization and combustion is conducted. Both hydrocarbon and cryogenic liquid droplets over a wide range of thermodynamic states are considered. Various important high-pressure effects on droplet behavior, such as thermodynamic non-ideality, transport anomaly, and property variation, are reviewed. Results indicate that the ambient gas pressure exerts significant control of droplet gasification and burning processes through its influence on fluid transport, gas-liquid interfacial thermodynamics, and chemical reactions. The droplet gasification rate increases progressively with pressure. However, the data for the overall burnout time exhibit a considerable change in the combustion mechanism at the criticl pressure, mainly as a result of reduced mass diffusivity and latent heat of vaporization with increased pressure. The influence of droplet size on the burning characteristics is also noted.

  16. Swimming Droplets

    Science.gov (United States)

    Maass, Corinna C.; Krüger, Carsten; Herminghaus, Stephan; Bahr, Christian

    2016-03-01

    Swimming droplets are artificial microswimmers based on liquid droplets that show self-propelled motion when immersed in a second liquid. These systems are of tremendous interest as experimental models for the study of collective dynamics far from thermal equilibrium. For biological systems, such as bacterial colonies, plankton, or fish swarms, swimming droplets can provide a vital link between simulations and real life. We review the experimental systems and discuss the mechanisms of self-propulsion. Most systems are based on surfactant-stabilized droplets, the surfactant layer of which is modified in a way that leads to a steady Marangoni stress resulting in an autonomous motion of the droplet. The modification of the surfactant layer is caused either by the advection of a chemical reactant or by a solubilization process. Some types of swimming droplets possess a very simple design and long active periods, rendering them promising model systems for future studies of collective behavior.

  17. Fluoropolymer surface coatings to control droplets in microfluidic devices.

    Science.gov (United States)

    Riche, Carson T; Zhang, Chuchu; Gupta, Malancha; Malmstadt, Noah

    2014-06-07

    We have demonstrated the application of low surface energy fluoropolymer coatings onto poly(dimethylsiloxane) (PDMS) microfluidic devices for droplet formation and extraction-induced merger of droplets. Initiated chemical vapor deposition (iCVD) was used to pattern fluoropolymer coatings within microchannels based on geometrical constraints. In a two-phase flow system, the range of accessible flow rates for droplet formation was greatly enhanced in the coated devices. The ability to controllably apply the coating only at the inlet facilitated a method for merging droplets. An organic spacer droplet was extracted from between a pair of aqueous droplets. The size of the organic droplet and the flow rate controlled the time to merge the aqueous droplets; the process of merging was independent of the droplet sizes. Extraction-induced droplet merging is a robust method for manipulating droplets that could be applied in translating multi-step reactions to microfluidic platforms.

  18. Black Droplets

    CERN Document Server

    Santos, Jorge E

    2014-01-01

    Black droplets and black funnels are gravitational duals to states of a large N, strongly coupled CFT on a fixed black hole background. We numerically construct black droplets corresponding to a CFT on a Schwarzchild background with finite asymptotic temperature. We find two branches of such droplet solutions which meet at a turning point. Our results suggest that the equilibrium black droplet solution does not exist, which would imply that the Hartle-Hawking state in this system is dual to the black funnel constructed in \\cite{Santos:2012he}. We also compute the holographic stress energy tensor and match its asymptotic behaviour to perturbation theory.

  19. On The Validity of the Assumed PDF Method for Modeling Binary Mixing/Reaction of Evaporated Vapor in GAS/Liquid-Droplet Turbulent Shear Flow

    Science.gov (United States)

    Miller, R. S.; Bellan, J.

    1997-01-01

    An Investigation of the statistical description of binary mixing and/or reaction between a carrier gas and an evaporated vapor species in two-phase gas-liquid turbulent flows is perfomed through both theroetical analysis and comparisons with results from direct numerical simulations (DNS) of a two-phase mixing layer.

  20. On The Validity of the Assumed PDF Method for Modeling Binary Mixing/Reaction of Evaporated Vapor in GAS/Liquid-Droplet Turbulent Shear Flow

    Science.gov (United States)

    Miller, R. S.; Bellan, J.

    1997-01-01

    An Investigation of the statistical description of binary mixing and/or reaction between a carrier gas and an evaporated vapor species in two-phase gas-liquid turbulent flows is perfomed through both theroetical analysis and comparisons with results from direct numerical simulations (DNS) of a two-phase mixing layer.

  1. Explosive boiling of a metallic glass superheated by nanosecond pulse laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, M. Q., E-mail: mqjiang@imech.ac.cn, E-mail: lhdai@lnm.imech.ac.cn [State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190 (China); Institute of Materials Physics, Westfälische Wilhelms-Universität Münster, Münster 48149 (Germany); Wei, Y. P. [Key Laboratory of Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190 (China); Wilde, G. [Institute of Materials Physics, Westfälische Wilhelms-Universität Münster, Münster 48149 (Germany); Dai, L. H., E-mail: mqjiang@imech.ac.cn, E-mail: lhdai@lnm.imech.ac.cn [State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190 (China)

    2015-01-12

    We report an explosive boiling in a Zr-based (Vitreloy 1) bulk metallic glass irradiated by a nanosecond pulse laser with a single shot. This critical phenomenon is accompanied by the ejection of high-temperature matter from the target and the formation of a liquid-gas spinodal pattern on the irradiated area. An analytical model reveals that the glassy target experiences the normal heating (melting) and significant superheating, eventually culminating in explosive boiling near the spinodal limit. Furthermore, the time lag of nucleation and the critical radius of vapor bubbles are theoretically predicted, which are in agreement with the experimental observations. This study provides the investigation on the instability of a metallic glass liquid near the thermodynamic critical temperature.

  2. Numerical calculation of superheating magnetic fields and currents for superconducting slabs

    Science.gov (United States)

    Landau, I. L.; Rinderer, L.

    1995-08-01

    Numerical calculations of superheating magnetic fields and superheating currents for superconducting slabs for a wide range of the sample thickness are presented. The calculations were made for low values of Ginzburg-Landau parameter κ, i.e., for type-1 superconductors. We propose also experimental procedures to measure superheating fields and currents in films and bulk samples.

  3. Dancing droplets: Contact angle, drag, and confinement

    Science.gov (United States)

    Benusiglio, Adrien; Cira, Nate; Prakash, Manu

    2015-11-01

    When deposited on a clean glass slide, a mixture of water and propylene glycol forms a droplet of given contact angle, when both pure liquids spread. (Cira, Benusiglio, Prakash: Nature, 2015). The droplet is stabilized by a gradient of surface tension due to evaporation that induces a Marangoni flow from the border to the apex of the droplets. The apparent contact angle of the droplets depends on both their composition and the external humidity as captured by simple models. These droplets present remarkable properties such as lack of a large pinning force. We discuss the drag on these droplets as a function of various parameters. We show theoretical and experimental results of how various confinement geometries change the vapor gradient and the dynamics of droplet attraction.

  4. Superheated starch: A novel approach towards spreadable particle gels

    NARCIS (Netherlands)

    Steeneken, P.A.M.; Woortman, A.J.J.

    2009-01-01

    When aqueous potato starch suspensions were heated into the solution state and cooled, spreadable particle gels were obtained with a spherulite morphology and a cream-like texture. This so-called superheated starch (SHS) exhibits more effective gelling properties than maltodextrin, which is

  5. La moral de los superhéroes

    Directory of Open Access Journals (Sweden)

    Jhon Rozo Mila

    2015-12-01

    Full Text Available Los superhéroes, el deber moral y la obligación; El caso de Spider-Man y los X-Men. Laura Victoria Bolaño Pérez; Universidad del Rosario, colección Ópera Prima, Bogotá, 2012, 309 págs.

  6. Droplets Acoustics

    CERN Document Server

    Dahan, Raphael; Carmon, Tal

    2015-01-01

    Contrary to their capillary resonances (Rayleigh, 1879) and their optical resonances (Ashkin, 1977), droplets acoustical resonances were rarely considered. Here we experimentally excite, for the first time, the acoustical resonances of a droplet that relies on sound instead of capillary waves. Droplets vibrations at 37 MHz rates and 100 quality factor are optically excited and interrogated at an optical threshold of 68 microWatt. Our vibrations span a spectral band that is 1000 times higher when compared with drops previously-studied capillary vibration.

  7. Possible transmission experiments with low-velocity helium droplets

    Science.gov (United States)

    Wynveen, A.; Lidke, K. A.; Lutsyshyn, Y.; Halley, J. W.

    2007-02-01

    We show that very low velocity droplets can be used to carry out an experiment to test whether condensate mediated transmission processes can occur in a superfluid droplet of He4 . By appropriately choosing the droplet radius and temperature, we can eliminate the competing roton, phonon, and ripplon mediated elastic transmission events. Then a calculation shows that if a few percent or more of the incident atoms experience anomalous condensate mediated transmission, the effects should be detectable in the droplet trajectories. We consider two forms of the experiment, involving a freely falling droplet in ambient vapor in the first instance and an oscillating droplet in a magnetic trap in the second.

  8. Leidenfrost levitation: beyond droplets.

    Science.gov (United States)

    Hashmi, Ali; Xu, Yuhao; Coder, Benjamin; Osborne, Paul A; Spafford, Jonathon; Michael, Grant E; Yu, Gan; Xu, Jie

    2012-01-01

    Friction is a major inhibitor in almost every mechanical system. Enlightened by the Leidenfrost effect - a droplet can be levitated by its own vapor layer on a sufficiently hot surface - we demonstrate for the first time that a small cart can also be levitated by Leidenfrost vapor. The levitated cart can carry certain amount of load and move frictionlessly over the hot surface. The maximum load that the cart can carry is experimentally tested over a range of surface temperatures. We show that the levitated cart can be propelled not only by gravitational force over a slanted flat surface, but also self-propelled over a ratchet shaped horizontal surface. In the end, we experimentally tested water consumption rate for sustaining the levitated cart, and compared the results to theoretical calculations. If perfected, this frictionless Leidenfrost cart could be used in numerous engineering applications where relative motion exists between surfaces.

  9. Film boiling of mercury droplets

    Science.gov (United States)

    Baumeister, K. J.; Schoessow, G. J.; Chmielewski, C. E.

    1975-01-01

    Vaporization times of mercury droplets in Leidenfrost film boiling on a flat horizontal plate are measured in an air atmosphere. Extreme care was used to prevent large amplitude droplet vibrations and surface wetting; therefore, these data can be compared to film boiling theory. For these data, diffusion from the upper surface of the drop is a dominant mode of mass transfer from the drop. A closed-form analytical film boiling theory is developed to account for the diffusive evaporation. Reasonable agreement between data and theory is seen.

  10. Condensation on Highly Superheated Surfaces: Unstable Thin Films in a Wickless Heat Pipe.

    Science.gov (United States)

    Kundan, Akshay; Nguyen, Thao T T; Plawsky, Joel L; Wayner, Peter C; Chao, David F; Sicker, Ronald J

    2017-03-03

    A wickless heat pipe was operated on the International Space Station to provide a better understanding of how the microgravity environment might alter the physical and interfacial forces driving evaporation and condensation. Traditional heat pipes are divided into three zones: evaporation at the heated end, condensation at the cooled end, and intermediate or adiabatic in between. The microgravity experiments reported herein show that the situation may be dramatically more complicated. Beyond a threshold heat input, there was a transition from evaporation at the heated end to large-scale condensation, even as surface temperatures exceeded the boiling point by 160 K. The hotter the surface, the more vapor was condensed onto it. The condensation process at the heated end is initiated by thickness and temperature disturbances in the thin liquid film that wet the solid surface. Those disturbances effectively leave the vapor "superheated" in that region. Condensation is amplified and sustained by the high Marangoni stresses that exist near the heater and that drive liquid to cooler regions of the device.

  11. Superheated water chromatography--a green technology for the future.

    Science.gov (United States)

    Smith, Roger M

    2008-03-14

    Reversed phase liquid chromatography using superheated water as the mobile phase, at temperatures between 100 and 250 degrees C, offers a number of advantages for the analyst. It is an environmentally clean solvent, reducing solvent usage and disposal costs. It has advantages in detection, allowing UV spectra to be monitored down to short wavelengths, as well as a compatibility with universal flame ionisation detection and mass spectroscopy. By employing deuterium oxide as the eluent, solvent free NMR spectra can be measured. The development of newer more thermally stable stationary phases, including hybrid phases, have expanded the analytes that can be examined and these now range from alkylbenzenes, phenols, alkyl aryl ketones and a number of pharmaceuticals to carboxylic acids, amino acids, and carbohydrates. Very few compounds have been found to be unstable during the analysis. The separation methods can be directly coupled to superheated water extraction providing a totally solvent free system for sample extraction and analysis.

  12. Fuzzy cascade control based on control's history for superheated temperature

    Institute of Scientific and Technical Information of China (English)

    WANG Guangjun; LI Gang; SHEN Shuguang

    2007-01-01

    To address the characteristics of the large delay and uncertainty of superheated temperature,a new cascade control system is presented based on control's history.Based on the analysis of the control objects' dynamic characteristics,historical control information (substituting for the deviation change rate) is used as the basis for decision-making of the fuzzy control.Therefore,the changing trend of the controlled variable can be accurately reflected.Furthermore,a proportional component is introduced,the advantages of PID and fuzzy controllers are integrated,and the structure weaknesses of conventional fuzzy controllers are overcome.Simulation shows that this control method can effectively reduce the adverse impact of the delay on control effects and,therefore,exhibit strong adaptability by comparing the superheated temperature control system by this controller with PID and conventional fuzzy controllers.

  13. AUTOMATIC CONTROL SYSTEM OF THE DRUM BOILER SUPERHEATED STEAM TEMPERATURE.

    Directory of Open Access Journals (Sweden)

    Juravliov A.A.

    2006-04-01

    Full Text Available The control system of the temperature of the superheated steam of the drum boiler is examined. Main features of the system are the PI-controller in the external control loop and introduction of the functional component of the error signal of the external control loop with the negative feedback of the error signal between the prescribed value of steam flowrate and the signal of the steam flowrate in the exit of the boiler in the internal control loop.

  14. Dynamic behavior of superheated steam and ways of control

    Institute of Scientific and Technical Information of China (English)

    Xu LI

    2008-01-01

    A simple way of calculating the dynamic behavior of a superheater is presented. A comparison of the measured data with the calculated result verifies the accuracy of this simple method. It is the first time that a phase compensation for real roots, i.e., the twin lead/lag loop which is facile for engineering applications, is used in superheated steam temperature control. Numerous simu-lation results show that both the response time lapse and maximal dynamic deviation are greatly reduced. Moreover, a formula to calculate the setting parameters is presented, together with a practical example of its engineering application in superheated steam temperature control with single-stage attemperation in a power plant boiler. This method can remarkably improve the control performance of superheated steam temperature and makes it possible for one stage attemperation to be sufficient for the superheater of power plant boilers, thus simplifying the superheater system and reducing investment. Because the control performance is remarkably raised, the set values of the steam temperature control system can be raised above rated values and also the operational economy, without impairing the operation safety.

  15. Structure formation by nanosilica particles suspended in levitated droplet

    CERN Document Server

    Saha, Abhishek; Kumar, Ranganathan; Basu, Saptarshi

    2010-01-01

    Vaporization of liquid droplets containing particles has been studied extensively for its applications in combustion, thermal coating, ink-jet printing, spray cooling, drug delivery, and surface patterning. Droplets containing solid particles show a preferential solute-migration during drying process. Recently we carried out experiments with vaporizing droplet suspended in an acoustic levitator. In this work, we present detailed study of a laser irradiated droplet containing nanosilica particles. Infrared and High speed imaging of the heating process for different concentrations of nanosilica revealed an interesting solute migration pattern. Further investigation with Particle Image Velocimetry shows presence of strong recirculation within the levitated droplet. It also reveals that with increasing viscosity of the liquid the strength of this recirculation decreases. Due to the droplets rotation about the levitator axis, a centrifugal force also dominated the flow field within the droplet. High speed imaging ...

  16. Experimental Attempts to Investigate the Influence of Petrographic Properties on Drying Characteristics of Lignite in Superheated Steam Atmosphere

    Directory of Open Access Journals (Sweden)

    Anna Sciazko

    2016-05-01

    Full Text Available A superheated steam fluidized bed dryer (SSFBD in a self-heat recuperative configuration has a great potential of improving thermal efficiency of a lignite-fired power plant by recovering both of latent heat of vaporization of water kept in the fuel and part of sensible heat during the fuel processing. However, the optimal design of the dryer requires the fundamental knowledge of drying characteristics in respect to the individual properties of the utilized fuel. Experimental investigation to determine the correlation between a specific coal properties originated from geological background and its drying characteristics is thus the major concern in this paper. The investigated lignite is a representative of Turoszow deposit in Poland. Experimental attempts unveiling drying kinetics were carried out for 5 mm and 10 mm diameter spherical samples in the superheated steam atmosphere in the temperature range of 110 °C–170 °C. Simultaneous and continuous measurements of changes in weight, surface and interior temperatures and appearance on each tested sample were carried out for describing drying behavior. Analytical investigation was applied to explain the drying characteristics, which are strongly affected by the individual properties of coal and the inherent ash composition.

  17. Neutron background signal in superheated droplet detectors of the Phase II SIMPLE dark matter search

    CERN Document Server

    Fernandes, A C; Felizardo, M; Girard, T A; Ramos, A R; Marques, J G; Prudêncio, M I; Marques, R; Carvalho, F P; Lázaro, I

    2015-01-01

    The simulation of the neutron background for Phase II of the SIMPLE direct dark matter search experiment is described, including further improvements relatively to previously reported data. Spontaneous fission and decay-induced (\\alpha,n) reactions originating in $^{238}$U and $^{232}$Th naturally present in the experiment materials were considered. The model employs the Monte Carlo MCNP neutron transport code, using a realistic geometry description and measured radioassays and material compositions as input. Tabled (\\alpha,n) yields, measured detection efficiencies and evaluated cross section data were used. The energy distribution of the recoiling nuclei is dealt with a distinct code. A thorough uncertainty analysis of the simulated results is performed that addresses statistical and most non-statistical uncertainties. The estimated recoil event rate is 0.367 $\\pm$ 0.002(stat.) $\\pm$ 0.064 (non-stat.) evt/kgd, a 10$\\%$ increase in the previous reported result.

  18. Velocity and rotation measurements in acoustically levitated droplets

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Abhishek [University of Central Florida, Orlando, FL 32816 (United States); Basu, Saptarshi [Indian Institute of Science, Bangalore 560012 (India); Kumar, Ranganathan, E-mail: ranganathan.kumar@ucf.edu [University of Central Florida, Orlando, FL 32816 (United States)

    2012-10-01

    The velocity scale inside an acoustically levitated droplet depends on the levitator and liquid properties. Using Particle Imaging Velocimetry (PIV), detailed velocity measurements have been made in a levitated droplet of different diameters and viscosity. The maximum velocity and rotation are normalized using frequency and amplitude of acoustic levitator, and droplet viscosity. The non-dimensional data are fitted for micrometer- and millimeter-sized droplets levitated in different levitators for different viscosity fluids. It is also shown that the rotational speed of nanosilica droplets at an advanced stage of vaporization compares well with that predicted by exponentially fitted parameters. -- Highlights: ► Demonstrates the importance of rotation in a levitated droplet that leads to controlled morphology. ► Provides detailed measurements of Particle Image Velocimetry inside levitated droplets. ► Shows variation of vortex strength with the droplet diameter and viscosity of the liquid.

  19. Droplet organelles?

    Science.gov (United States)

    Courchaine, Edward M; Lu, Alice; Neugebauer, Karla M

    2016-08-01

    Cells contain numerous, molecularly distinct cellular compartments that are not enclosed by lipid bilayers. These compartments are implicated in a wide range of cellular activities, and they have been variously described as bodies, granules, or organelles. Recent evidence suggests that a liquid-liquid phase separation (LLPS) process may drive their formation, possibly justifying the unifying term "droplet organelle". A veritable deluge of recent publications points to the importance of low-complexity proteins and RNA in determining the physical properties of phase-separated structures. Many of the proteins linked to such structures are implicated in human diseases, such as amyotrophic lateral sclerosis (ALS). We provide an overview of the organizational principles that characterize putative "droplet organelles" in healthy and diseased cells, connecting protein biochemistry with cell physiology.

  20. Effects of superheated steam on the drying of rubberwood

    Directory of Open Access Journals (Sweden)

    Kanokwan Buaphud

    2006-07-01

    Full Text Available Rubberwood drying is the most time and energy consuming step in the processing of wood product. This research studied the effect of superheated steam drying on the drying time required and the physical and mechanical properties of rubberwood after drying. In this study, a cylindrical drying chamber with a length of 1.2 m and a diameter of 0.5 m was constructed and injected with superheated steam. The dimensions of the wood lumber were 1 m × 7.62 cm × 2.54 cm. The wood samples were impinged with alternating cycles of superheated steam and hot air at ratios of 6:1, 4:1 and 1:6 hours until the moisture content was less than 15% dry basis. The conditions inside the chamber were 110ºC and ambient pressure. Continuous superheated steam and continuous hot air were also used for comparisons. The drying rate and the temperature profile for each process were determined.Initial acceptability of the dried wood was conducted using the prong test and visual inspection. Results showed that if the drying rate was too fast, the dried wood did not pass the prong test due to stress buildup. Therefore, an optimum drying condition was developed based on minimizing defects and reducing the drying time. For the optimum condition, the following schedule was carried out: (1 saturated steam at 100ºC was used during the first 4 hours of drying to prevent the wood surface from drying too quickly which would minimize the moisture gradient between the center and wood surface, (2 superheated steam at 105ºC and 110ºC was used in alternating cycle with hot air (80ºC during the main drying stages to rapidly remove the free water and majority of the bound water inside the wood, and (3 hot air was used continuously during the final stages of drying to reduce the relative humidity inside the chamber making it possible for the removal of the residual bound water. This process successfully reduced the drying time to less than 2 days without causing any defects which compared

  1. Applicability of superheated drop (bubble) detectors to reactor dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    d`Errico, F.; Curzio, G. [Univ. degli Studi di Pisa (Italy). Dipt. di Costruzioni Meccaniche e Nucleari; Alberts, W.G. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Apfel, R.E.; Guldbakke, S. [Yale Univ., New Haven, CT (United States). Dept. of Mechanical Engineering

    1994-12-31

    The characteristics of superheated drop (bubble) detectors (SDD`s) have been reviewed with respect to the possible application of these devices in reactor dosimetry. In particular, their ability to measure neutrons in the presence of a high noise level, elevated temperatures and intense {gamma} background has been investigated. Based on these studies, the use of SDD`s is proposed for the monitoring and analysis of neutron emission from spent fuel assemblies. Finally, the possibility to employ these detectors in radiation protection dosimetry around power plants is discussed.

  2. Neutron-gamma discrimination by pulse analysis with superheated drop detector

    CERN Document Server

    Das, Mala; Saha, S; Bhattacharya, S; Bhattacharjee, P

    2010-01-01

    Superheated drop detector (SDD) consisting of drops of superheated liquid of halocarbon is irradiated to neutrons and gamma-rays from 252Cf fission neutron source and 137Cs gamma source separately. The analysis of pulse height of the signals in the neutron and gamma-ray sensitive temperature provides strong information on the identification of neutron and gamma-ray induced events.

  3. Plasma Propulsion of a Metallic Micro-droplet and its Deformation upon Laser Impact

    CERN Document Server

    Kurilovich, Dmitry; Torretti, Francesco; Lassise, Adam; Hoekstra, Ronnie; Ubachs, Wim; Gelderblom, Hanneke; Versolato, Oscar O

    2016-01-01

    The propulsion of a liquid indium-tin micro-droplet by nanosecond-pulse laser impact is experimentally investigated. We capture the physics of the droplet propulsion in a scaling law that accurately describes the plasma-imparted momentum transfer, enabling the optimization of the laser-droplet coupling. The subsequent deformation of the droplet is described by an analytical model that accounts for the droplet's propulsion velocity and the liquid properties. Comparing our findings to those from vaporization-accelerated mm-sized water droplets, we demonstrate that the hydrodynamic response of laser-impacted droplets is scalable and independent of the propulsion mechanism.

  4. Leidenfrost Vapor Layer Stabilization on Superhydrophobic Surfaces

    Science.gov (United States)

    Vakarelski, Ivan; Patankar, Neelesh; Marston, Jeremy; Chan, Derek; Thoroddsen, Sigurdur

    2012-11-01

    We have performed experiments to investigate the influence of the wettability of a superheated metallic sphere on the stability of a thin vapor layer during the cooling of a sphere immersed in water. For high enough sphere temperatures, a continuous vapor layer (Leidenfrost regime) is observed on the surface of non-superhydrophobic spheres, but below a critical sphere temperature the layer becomes unstable and explosively switches to nuclear boiling regime. In contrast, when the sphere surface is textured and superhydrophobic, the vapor layer is stable and gradually relaxes to the sphere surface until the complete cooling of the sphere, thus avoiding the nuclear boiling transition altogether. This finding could help in the development of heat exchange devices and of vapor layer based drag reducing technologies.

  5. Investigation of coherent structures in a superheated jet using decomposition methods

    Science.gov (United States)

    Sinha, Avick; Gopalakrishnan, Shivasubramanian; Balasubramanian, Sridhar

    2016-11-01

    A superheated turbulent jet, commonly encountered in many engineering flows, is complex two phase mixture of liquid and vapor. The superposition of temporally and spatially evolving coherent vortical motions, known as coherent structures (CS), govern the dynamics of such a jet. Both POD and DMD are employed to analyze such vortical motions. PIV data is used in conjunction with the decomposition methods to analyze the CS in the flow. The experiments were conducted using water emanating into a tank containing homogeneous fluid at ambient condition. Three inlet pressure were employed in the study, all at a fixed inlet temperature. 90% of the total kinetic energy in the mean flow is contained within the first five modes. The scatterplot for any two POD coefficients predominantly showed a circular distribution, representing a strong connection between the two modes. We speculate that the velocity and vorticity contours of spatial POD basis functions show presence of K-H instability in the flow. From DMD, eigenvalues away from the origin is observed for all the cases indicating the presence of a non-oscillatory structure. Spatial structures are also obtained from DMD. The authors are grateful to Confederation of Indian Industry and General Electric India Pvt. Ltd. for partial funding of this project.

  6. Vaporization of synthetic fuels. Final report. [Thesis

    Energy Technology Data Exchange (ETDEWEB)

    Sirignano, W.A.; Yao, S.C.; Tong, A.Y.; Talley, D.

    1983-01-01

    The problem of transient droplet vaporization in a hot convective environment is examined. The main objective of the present study is to develop an algorithm for the droplet vaporization which is simple enough to be feasibly incorporated into a complete spray combustion analysis and yet will also account for the important physics such as liquid-phase internal circulation, unsteady droplet heating and axisymmetric gas-phase convection. A simplified liquid-phase model has been obtained based on the assumption of the existence of a Hill's spherical vortex inside the droplet together with some approximations made in the governing diffusion equation. The use of the simplified model in a spray situation has also been examined. It has been found that droplet heating and vaporization are essentially unsteady and droplet temperature is nonuniform for a significant portion of its lifetime. It has also been found that the droplet vaporization characteristic can be quite sensitive to the particular liquid-phase and gas-phase models. The results of the various models are compared with the existing experimental data. Due to large scattering in the experimental measurements, particularly the droplet diameter, no definite conclusion can be drawn based on the experimental data. Finally, certain research problems which are related to the present study are suggested for future studies.

  7. Superheated Water-Cooled Small Modular Underwater Reactor Concept

    Directory of Open Access Journals (Sweden)

    Koroush Shirvan

    2016-12-01

    Full Text Available A novel fully passive small modular superheated water reactor (SWR for underwater deployment is designed to produce 160 MWe with steam at 500ºC to increase the thermodynamic efficiency compared with standard light water reactors. The SWR design is based on a conceptual 400-MWe integral SWR using the internally and externally cooled annular fuel (IXAF. The coolant boils in the external channels throughout the core to approximately the same quality as a conventional boiling water reactor and then the steam, instead of exiting the reactor pressure vessel, turns around and flows downward in the central channel of some IXAF fuel rods within each assembly and then flows upward through the rest of the IXAF pins in the assembly and exits the reactor pressure vessel as superheated steam. In this study, new cladding material to withstand high temperature steam in addition to the fuel mechanical and safety behavior is investigated. The steam temperature was found to depend on the thermal and mechanical characteristics of the fuel. The SWR showed a very different transient behavior compared with a boiling water reactor. The inter-play between the inner and outer channels of the IXAF was mainly beneficial except in the case of sudden reactivity insertion transients where additional control consideration is required.

  8. Lattice Boltzmann Simulations of Evaporating Droplets with Nanoparticles

    Science.gov (United States)

    Zhao, Mingfei; Yong, Xin

    2016-11-01

    Elucidating the nanoparticle dynamics in drying droplets provides fundamental hydrodynamic insight into the evaporation-induced self-assembly, which is of great importance to materials printing and thin film processing. We develop a free-energy-based multiphase lattice Boltzmann model coupled with Lagrangian particle tracking to simulate evaporating particle-laden droplets on a solid substrate with specified wetting behavior. This work focuses on the interplay between the evaporation-driven advection and the self-organization of nanoparticles inside the droplet and at the droplet surface. For static droplets, the different parameters, fluid-particle interaction strength and particle number, governing the nanoparticle-droplet dynamics are systematically investigated, such as particle radial and circumferential distribution. We clarify the effect of nanoparticle presence on the droplet surface tension and wetting behavior. For evaporating droplets, we observe how droplet evaporation modulates the self-assembly of nanoparticles when the droplet has different static contact angles and hysteresis windows. We also confirm that the number of nanoparticles at the liquid-vapor interface influences the evaporation flux at the liquid-vapor interface.

  9. A Computational Study of Internal Flows in a Heated Water-Oil Emulsion Droplet

    KAUST Repository

    Sim, Jaeheon

    2015-01-05

    The vaporization characteristics of water-oil emulsion droplets are investigated by high fidelity computational simulations. One of the key objectives is to identify the physical mechanism for the experimentally observed behavior that the component in the dispersed micro-droplets always vaporizes first, for both oil-in-water and water-in-oil emulsion droplets. The mechanism of this phenomenon has not been clearly understood. In this study, an Eulerian-Lagrangian method was implemented with a temperature-dependent surface tension model and a dynamic adaptive mesh refinement in order to effectively capture the thermo-capillary effect of a micro-droplet in an emulsion droplet efficiently. It is found that the temperature difference in an emulsion droplet creates a surface tension gradient along the micro-droplet surface, inducing surface movement. Subsequently, the outer shear flow and internal flow circulation inside the droplet, referred to as the Marangoni convection, are created. The present study confirms that the Marangoni effect can be sufficiently large to drive the micro-droplets to the emulsion droplet surface at higher temperature, for both water-in-oil and oil-and-water emulsion droplets. A further parametric study with different micro-droplet sizes and temperature gradients demonstrates that larger micro-droplets move faster with larger temperature gradient. The oil micro-droplet in oil-in-water emulsion droplets moves faster due to large temperature gradients by smaller thermal conductivity.

  10. Phase transition time delays in irradiated superheated superconducting granules

    CERN Document Server

    Abplanalp, M; Czapek, G; Diggelmann, U; Furlan, M; Gabutti, A; Janos, S; Moser, U; Pozzi, R; Pretzl, Klaus P; Schmiemann, K; Perret-Gallix, D; Van den Brandt, B; Konter, J A; Mango, S

    1994-01-01

    The time difference between a particle interaction in a Superheated Superconducting Granule (SSG) and the resulting phase transition signal has been explored. Detectors containing Zn and Sn SSG were irradiated with neutrons and protons to study the heating mechanism taking place in nuclear recoil and ionizing events. Scattered neutrons have been detected by a scintillator hodoscope behind the SSG with a recoil energy measurement resolution of 10\\% and an interaction time resolution of 1ns. The fast transition of the metastable granules allowed to determine the elapsed time between an energy deposition and the phase transition signal. In the case of Sn granules, the results show that the time distributions are narrow and independent of the deposited energy in nuclear recoil and ionizing events. In Zn, however, the time distributions are much broader and depend on the energy deposition in the granule.

  11. Aquathermolysis of conventional heavy oil with superheated steam

    Institute of Scientific and Technical Information of China (English)

    Song Guangshou; Zhou Tiyao; Cheng Linsong; Wang Yunxian; Tian Guoqing; Pi Jian; Zhang Zheng

    2009-01-01

    This paper presents a new aquathermolysis study of conventional heavy oil in superheated steam. A new high temperature autoclave was designed, where volume and pressure could be adjusted. Aquathermolysis was studied on two different conventional heavy oil samples under different reaction times and temperatures. Experimental results show that aquathermolysis does take place for conventional heavy oil. As reaction time increases, the oil viscosity reduces. However, the reaction will reach equilibrium after a certain period of time and won't be sensitive to any further reaction time any more. Analysis shows that, while resin and asphaltenes decrease, saturated hydrocarbons and the H/C ratio increase after reaction. The main mechanism of aquathermolysis includes hydrogenization, desulfuration reaction of resin and asphaltenes, etc.

  12. Neutron ambient dosimetry with superheated drop (bubble) detectors

    Energy Technology Data Exchange (ETDEWEB)

    d`Errico, F.; Noccioni, P. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari; Alberts, W.G.; Dietz, E.; Siebert, B.R.L. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Gualdrini, G. [ENEA, Bologna (Italy); Kurkdjian, J. [CEA Centre d`Etudes Nucleaires de Cadarache, 13 - Saint-Paul-lez-Durance (France). Inst. de Protection et de Surete Nucleaire

    1996-12-31

    A prototype neutron area monitor was developed which improves the performance of superheated drop detectors based on halocarbon-12. The detectors are thermally controlled: this removes external temperature effects while ensuring a dose equivalent response optimised with respect to its energy dependence. The system was first characterised through calibrations with monoenergetic neutron beams. In the intermediate energy range, where experimental investigations were not possible, Monte Carlo response calculations were carried out. The prototype was then extensively tested by means of simulated and in-field irradiations with broad neutron spectra. All these tests indicated a remarkably constant dose equivalent response regardless of the neutron energy distributions. The current device is a fairly delicate system which can be operated reliably when environmental conditions are not extreme. Nevertheless, when it was possible to employ it, this monitor demonstrated an accuracy far superior to that of conventional meters used in routine surveillance. (author).

  13. Precision manufacture of phase-change perfluorocarbon droplets using microfluidics.

    Science.gov (United States)

    Martz, Thomas D; Sheeran, Paul S; Bardin, David; Lee, Abraham P; Dayton, Paul A

    2011-11-01

    Liquid perfluorocarbon droplets have been of interest in the medical acoustics community for use as acoustically activated particles for tissue occlusion, imaging and therapeutics. To date, methods to produce liquid perfluorocarbon droplets typically result in a polydisperse size distribution. Because the threshold of acoustic activation is a function of diameter, there would be benefit from a monodisperse population to preserve uniformity in acoustic activation parameters. Through use of a microfluidic device with flow-focusing technology, the production of droplets of perfluoropentane with a uniform size distribution is demonstrated. Stability studies indicate that these droplets are stable in storage for at least two weeks. Acoustic studies illustrate the thresholds of vaporization as a function of droplet diameter, and a logarithmic relationship is observed between acoustic pressure and vaporization threshold within the size ranges studied. Droplets of uniform size have very little variability in acoustic vaporization threshold. Results indicate that microfluidic technology can enable greater manufacturing control of phase-change perfluorocarbons for acoustic droplet vaporization applications.

  14. Electrowetting Actuation of Polydisperse Nanofluid Droplets

    Directory of Open Access Journals (Sweden)

    Crismar Patacsil

    2017-01-01

    Full Text Available We present results of electrowetting experiments employing droplets formed from aqueous suspensions of Au nanoparticles. A planar electrowetting system, consisting of a Pt wire electrode and a bottom Cu electrode with an insulating silicone layer, is used to observe changes in droplet contact angle when an external electric field is applied. The equilibrium contact angle at 0 V decreases with increasing nanoparticle concentration, dropping from 100.4° for pure deionized water to 94.7° for a 0.5 μM nanofluid. Increasing the nanoparticle content also lowers the required voltage for effective actuation. With actuation at 15 V, contact angle decreases by 9% and 35% for droplets formed from pure water and a 0.5 μM nanoparticle suspension, respectively. Contact angle saturation is observed with nanofluid droplets, with the threshold voltage decreasing as nanoparticle concentration rises. Maximum droplet actuation before contact angle saturation is achieved at only 10 V for a concentration of 0.5 μM. A proposed mechanism for the enhanced electrowetting response of a nanofluid droplet involves a reduction in surface tension of the droplet as nanoparticles accumulate at the liquid-vapor interface.

  15. Three dimensional force balance of asymmetric droplets

    Science.gov (United States)

    Kim, Yeseul; Lim, Su Jin; Cho, Kun; Weon, Byung Mook

    2016-11-01

    An equilibrium contact angle of a droplet is determined by a horizontal force balance among vapor, liquid, and solid, which is known as Young's law. Conventional wetting law is valid only for axis-symmetric droplets, whereas real droplets are often asymmetric. Here we show that three-dimensional geometry must be considered for a force balance for asymmetric droplets. By visualizing asymmetric droplets placed on a free-standing membrane in air with X-ray microscopy, we are able to identify that force balances in one side and in other side control pinning behaviors during evaporation of droplets. We find that X-ray microscopy is powerful for realizing the three-dimensional force balance, which would be essential in interpretation and manipulation of wetting, spreading, and drying dynamics for asymmetric droplets. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2016R1D1A1B01007133).

  16. Difference Of Evaporation and Boiling for Heterogeneous Water Droplets in a High-Temperature Gas

    Directory of Open Access Journals (Sweden)

    Legros Jean Claude

    2015-01-01

    Full Text Available Experimental investigation of vapor formation was carried out on water droplets on fixed graphite substrate and heterogeneous droplets (containing solid single inclusions when heating in high-temperature gas. High-speed video shooting (up to 105 frames per second, optical method (Particle Image Velocimetry and TEMA Automotive software were used. We revealed two phase change mechanisms of heterogeneous liquid droplets. Effect of evaporation and boiling on evaporation times of water droplets was determined.

  17. Medium-Range Order Structure and Fragility of Superheated Melts of Amorphous CuHf Alloys

    Institute of Scientific and Technical Information of China (English)

    BIAN Xiu-Fang; SUN Bao-An; HU Li-Na

    2006-01-01

    @@ The structural factors of amorphous CuHf alloys at different temperatures are determined by using a high temperature x-ray diffractometer. It is found that not only the short-range order structure but also the medium-range order structure exists in amorphous CuHf alloys. The dynamic viscosities of CuHf alloy melts are measured by a torsional oscillation viscometer. The fragility of superheated melts of CuHf alloys is calculated based on the viscosity data. The experimental results show that the glass-forming ability of the CuHf alloys is closely related to the fragility of their superheated melt. The relationship between the medium-range order structures and the fragility of superheated melts has also been established in amorphous CuHf alloys. In contrast to the fragility of supercooled liquids, the fragility of superheated liquids promises a better approach to reflecting the dynamics of glass forming liquids.

  18. Evaporation of polydispersed droplets in a highly turbulent channel flow

    Science.gov (United States)

    Cochet, M.; Bazile, Rudy; Ferret, B.; Cazin, S.

    2009-09-01

    A model experiment for the study of evaporating turbulent two-phase flows is presented here. The study focuses on a situation where pre-atomized and dispersed droplets vaporize and mix in a heated turbulent flow. The test bench consists in a channel flow with characteristics of homogeneous and isotropic turbulence where fluctuations levels reach very high values (25% in the established zone). An ultrasonic atomizer allows the injection of a mist of small droplets of acetone in the carrier flow. The large range diameters ensure that every kind of droplet behavior with regards to turbulence is possible. Instantaneous concentration fields of the vaporized phase are extracted from fluorescent images (PLIF) of the two phase flow. The evolution of the mixing of the acetone vapor is analyzed for two different liquid mass loadings. Despite the high turbulence levels, concentration fluctuations remain significant, indicating that air and acetone vapor are not fully mixed far from the injector.

  19. Evaporation of polydispersed droplets in a highly turbulent channel flow

    Energy Technology Data Exchange (ETDEWEB)

    Cochet, M.; Bazile, Rudy; Ferret, B.; Cazin, S. [INPT, UPS, IMFT (Institut de Mecanique des Fluides de Toulouse), Universite de Toulouse (France)

    2009-09-15

    A model experiment for the study of evaporating turbulent two-phase flows is presented here. The study focuses on a situation where pre-atomized and dispersed droplets vaporize and mix in a heated turbulent flow. The test bench consists in a channel flow with characteristics of homogeneous and isotropic turbulence where fluctuations levels reach very high values (25% in the established zone). An ultrasonic atomizer allows the injection of a mist of small droplets of acetone in the carrier flow. The large range diameters ensure that every kind of droplet behavior with regards to turbulence is possible. Instantaneous concentration fields of the vaporized phase are extracted from fluorescent images (PLIF) of the two phase flow. The evolution of the mixing of the acetone vapor is analyzed for two different liquid mass loadings. Despite the high turbulence levels, concentration fluctuations remain significant, indicating that air and acetone vapor are not fully mixed far from the injector. (orig.)

  20. Electric-Field-Enhanced Jumping-Droplet Condensation

    Science.gov (United States)

    Miljkovic, Nenad; Preston, Daniel; Enright, Ryan; Limia, Alexander; Wang, Evelyn

    2013-11-01

    When condensed droplets coalesce on a superhydrophobic surface, the resulting droplet can jump due to the conversion of surface energy into kinetic energy. This frequent out-of-plane droplet jumping has the potential to enhance condensation heat and mass transfer. In this work, we demonstrated that these jumping droplets accumulate positive charge that can be used to further increase condensation heat transfer via electric fields. We studied droplet jumping dynamics on silanized nanostructured copper oxide surfaces. By characterizing the droplet trajectories under various applied external electric fields (0 - 50 V/cm), we show that condensation on superhydrophobic surfaces results in a buildup of negative surface charge (OH-) due to dissociated water ion adsorption on the superhydrophobic coating. Consequently, the opposite charge (H3O +) accumulates on the coalesced jumping droplet. Using this knowledge, we demonstrate electric-field-enhanced jumping droplet condensation whereby an external electric field opposes the droplet vapor flow entrainment towards the condensing surface to increase the droplet removal rate and overall surface heat transfer by 100% when compared to state-of-the-art dropwise condensing surfaces. This work not only shows significant condensation heat transfer enhancement through the passive charging of condensed droplets, but promises a low cost approach to increase efficiency for applications such as atmospheric water harvesting and dehumidification.

  1. Hydrodynamics of Leidenfrost droplets in one-component fluids

    KAUST Repository

    Xu, Xinpeng

    2013-04-24

    Using the dynamic van der Waals theory [Phys. Rev. E 75, 036304 (2007)], we numerically investigate the hydrodynamics of Leidenfrost droplets under gravity in two dimensions. Some recent theoretical predictions and experimental observations are confirmed in our simulations. A Leidenfrost droplet larger than a critical size is shown to be unstable and break up into smaller droplets due to the Rayleigh-Taylor instability of the bottom surface of the droplet. Our simulations demonstrate that an evaporating Leidenfrost droplet changes continuously from a puddle to a circular droplet, with the droplet shape controlled by its size in comparison with a few characteristic length scales. The geometry of the vapor layer under the droplet is found to mainly depend on the droplet size and is nearly independent of the substrate temperature, as reported in a recent experimental study [Phys. Rev. Lett. 109, 074301 (2012)]. Finally, our simulations demonstrate that a Leidenfrost droplet smaller than a characteristic size takes off from the hot substrate because the levitating force due to evaporation can no longer be balanced by the weight of the droplet, as observed in a recent experimental study [Phys. Rev. Lett. 109, 034501 (2012)].

  2. Ginzburg-Landau theory of the superheating field anisotropy of layered superconductors

    Science.gov (United States)

    Liarte, Danilo B.; Transtrum, Mark K.; Sethna, James P.

    2016-10-01

    We investigate the effects of material anisotropy on the superheating field of layered superconductors. We provide an intuitive argument both for the existence of a superheating field, and its dependence on anisotropy, for κ =λ /ξ (the ratio of magnetic to superconducting healing lengths) both large and small. On the one hand, the combination of our estimates with published results using a two-gap model for MgB2 suggests high anisotropy of the superheating field near zero temperature. On the other hand, within Ginzburg-Landau theory for a single gap, we see that the superheating field shows significant anisotropy only when the crystal anisotropy is large and the Ginzburg-Landau parameter κ is small. We then conclude that only small anisotropies in the superheating field are expected for typical unconventional superconductors near the critical temperature. Using a generalized form of Ginzburg Landau theory, we do a quantitative calculation for the anisotropic superheating field by mapping the problem to the isotropic case, and present a phase diagram in terms of anisotropy and κ , showing type I, type II, or mixed behavior (within Ginzburg-Landau theory), and regions where each asymptotic solution is expected. We estimate anisotropies for a number of different materials, and discuss the importance of these results for radio-frequency cavities for particle accelerators.

  3. Functional nanostructured hydrothermal carbons for sustainable technologies : heteroatom doping and superheated vapor

    OpenAIRE

    Wohlgemuth, Stephanie-Angelika

    2012-01-01

    The underlying motivation for the work carried out for this thesis was the growing need for more sustainable technologies. The aim was to synthesize a “palette” of functional nanomaterials using the established technique of hydrothermal carbonization (HTC). The incredible diversity of HTC was demonstrated together with small but steady advances in how HTC can be manipulated to tailor material properties for specific applications. Two main strategies were used to modify the materials obtained ...

  4. Photoacoustic spectral characterization of perfluorocarbon droplets

    Science.gov (United States)

    Strohm, Eric; Gorelikov, Ivan; Matsuura, Naomi; Kolios, Michael

    2012-02-01

    Perfluorocarbon droplets containing optical absorbing nanoparticles have been developed for use as theranostic agents (for both imaging and therapy) and as dual-mode contrast agents. Droplets can be used as photoacoustic contrast agents, vaporized via optical irradiation, then the resulting bubbles can be used as ultrasound imaging and therapeutic agents. The photoacoustic signals from micron-sized droplets containing silica coated gold nanospheres were measured using ultra-high frequencies (100-1000 MHz). The spectra of droplets embedded in a gelatin phantom were compared to a theoretical model which calculates the pressure wave from a spherical homogenous liquid undergoing thermoelastic expansion resulting from laser absorption. The location of the spectral features of the theoretical model and experimental spectra were in agreement after accounting for increases in the droplet sound speed with frequency. The agreement between experiment and model indicate that droplets (which have negligible optical absorption in the visible and infrared spectra by themselves) emitted pressure waves related to the droplet composition and size, and was independent of the physical characteristics of the optical absorbing nanoparticles. The diameter of individual droplets was calculated using three independent methods: the time domain photoacoustic signal, the time domain pulse echo ultrasound signal, and a fit to the photoacoustic model, then compared to the diameter as measured by optical microscopy. It was found the photoacoustic and ultrasound methods calculated diameters an average of 2.6% of each other, and 8.8% lower than that measured using optical microscopy. The discrepancy between the calculated diameters and the optical measurements may be due to the difficulty in resolving the droplet edges after being embedded in the translucent gelatin medium.

  5. Neutron spectrometry in mixed fields: superheated drop (bubble) detectors.

    Science.gov (United States)

    d'Errico, F; Matzke, M

    2003-01-01

    The BINS neutron threshold spectrometer permits the analysis of the main features of a neutron field for radiation protection purposes. The system offers a virtually complete photon discrimination and nested threshold responses to neutrons, which allow the use of very effective 'few-channel' unfolding procedures. To date, the practical operating energy range of a BINS is 0.1-10 MeV, over which a resolving power of 20-30% can be expected when the deconvolution is performed without explicit pre-information. Spectrum unfolding results in relatively high uncertainties on the differential fluence distributions, but due to negative correlations in adjacent energy groups the uncertainties on integral quantities such as dose equivalent are small and of the order of 5% to 10%, similar to the results of other active spectrometers. In comparison with most radiation detectors, the BINS is an extremely slow system due to the intrinsic duration of a bubble pulse and to the time associated with pulse analysis. For example, the maximum sustainable fluence rate of 1 MeV neutrons is about 10(4) cm(-2) s(-1), which is low for many neutron physics experiments. However, this rate corresponds to an ambient dose equivalent rate of about 1 mSv h(-1), making the active device adequate for radiation protection applications in the workplaces described in Section 1. There are ample margins for improvement of the spectrometer. In particular, in the low-energy region a thermal-epithermal neutron group may be added by using chlorine-bearing emulsions stabilised at suitable temperatures. In fact, the latest version of the system achieves this goal by using a single superheated emulsion of dichlorotetrafluoroethane (R-114) operated at temperatures up to 55 degrees C. This extends the range of the spectrometer and at the same time removes the undue enhancement of the UNFANA output in the low energy region. Above 10 MeV, the resolution can be improved by adding more thresholds, e.g. by starting from

  6. Issues related to waste sewage sludge drying under superheated steam

    Directory of Open Access Journals (Sweden)

    Hamawand Ihsan

    2015-12-01

    Full Text Available Sewage sludge was dried in a rotary drum dryer under superheated steam. Particle size and moisture content were shown to have significant influences on sticking and agglomeration of the materials. Pouring partially dried sludge (70–80% moisture content, wet basis directly into the screw feeder of the drum dryer resulted in a significant sticking to the surface of the drum and the final particle size of the product was greater than 100 mm in diameter. The moisture content of this product was slightly less than its initial value. To overcome this issue, the sludge was mixed with lignite at variety ratios and then chopped before being introduced to the feeding screw. It was found that mixing the sludge with lignite and then sieving the chopped materials through a four millimetre mesh sieve was the key to solve this issue. This technique significantly reduced both stickiness and agglomeration of the material. Also, this enabled for a significant reduction in moisture content of the final product.

  7. Microwave superheated water extraction of polysaccharides from spent coffee grounds.

    Science.gov (United States)

    Passos, Cláudia P; Coimbra, Manuel A

    2013-04-15

    The spent coffee grounds (SCG) are a food industry by-product that can be used as a rich source of polysaccharides. In the present work, the feasibility of microwave superheated water extraction of polysaccharides from SCG was studied. Different ratios of mass of SCG to water, from 1:30 to 1:5 (g:mL) were used for a total volume of 80 mL. Although the amount of material extracted/batch (MAE1) increased with the increase of the concentration of the sample, the amount of polysaccharides achieved a maximum of 0.57 g/batch for 1:10. Glycosidic-linkage composition showed that all extraction conditions allowed to obtain mainly arabinogalactans. When the unextracted insoluble material was re-extracted under the same conditions (MAE2), a further extraction of polysaccharides was observed (0.34 g/batch for 1:10), mainly galactomannans. Also, a high amount of oligosaccharides, mainly derived from galactomannans, can be obtained in MAE2 (0.96 g/batch for 1:10). This technology allows to obtain galactomannans and arabinogalactans in proportions that are dependent on the operating conditions.

  8. High-energy neutron dosimetry with superheated drop detectors

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, F.; Agosteo, S.; Sannikov, A.V.; Silari, M

    2002-07-01

    A systematic analysis of the response of dichlorodifluoromethane superheated drop detectors was performed in the 46-133 MeV energy range. Experiments with quasi-monoenergetic neutron beams were performed at the Universite Catholique de Leuvain-la-Neuve, Belgium and the Svedberg Laboratory, Sweden, while tests in a broad field were performed at CERN. To determine the response of the detectors to the high-energy beams, the spectra of incident neutrons were folded over functions modelled after the cross sections for the production of heavy ions from the detector elements. The cross sections for fluorine and chlorine were produced in this work by means of the Monte Carlo high-energy transport code HADRON based on the cascade exciton model of nuclear interactions. The new response data permit the interpretation of measurements at high-energy accelerators and on high-altitude commercial flights, where a 30-50% under-response had been consistently recorded with respect to neutron dose equivalent. The introduction of a 1 cm lead shell around the detectors effectively compensates most of the response defect. (author)

  9. Lattice Boltzmann modeling of self-propelled Leidenfrost droplets on ratchet surfaces

    CERN Document Server

    Li, Q; Francois, M M; Hu, A J

    2015-01-01

    In this paper, the self-propelled motion of Leidenfrost droplets on ratchet surfaces is numerically investigated with a thermal multiphase lattice Boltzmann model with liquid-vapor phase change. The capability of the model for simulating evaporation is validated via the D2 law. Using the model, we first study the performances of Leidenfrost droplets on horizontal ratchet surfaces. It is numerically shown that the motion of self-propelled Leidenfrost droplets on ratchet surfaces is owing to the asymmetry of the ratchets and the vapor flows beneath the droplets. It is found that the Leidenfrost droplets move in the direction toward the slowly inclined side from the ratchet peaks, which agrees with the direction of droplet motion in experiments [Linke et al., Phys. Rev. Lett., 2006, 96, 154502]. Moreover, the influences of the ratchet aspect ratio are investigated. For the considered ratchet surfaces, a critical value of the ratchet aspect ratio is approximately found, which corresponds to the maximum droplet mo...

  10. Mathematical Modeling of Ultra-Superheated Steam Gasification

    Science.gov (United States)

    Xin, Fen

    Pure steam gasification has been of interest in hydrogen production, but with the challenge of supplying heat for endothermic reactions. Traditional solutions included either combusting feedstocks at the price of decreasing carbon conversion ratio, or using costly heating apparatus. Therefore, a distributed gasifier with an Ultra-Superheated-Steam (USS) generator was invented, satisfying the heat requirement and avoiding carbon combustion in steam gasification. This project developed the first version of the Ultra-Superheated-Steam-Fluidization-Model (USSFM V1.0) for the USS gasifier. A stand-alone equilibrium combustion model was firstly developed to calculate the USS mixture, which was the input to the USSFM V1.0. Model development of the USSFM V1.0 included assumptions, governing equations, boundary conditions, supporting equations and iterative schemes of guessed values. There were three nested loops in the dense bed and one loop in the freeboard. The USSFM V1.0 included one main routine and twenty-four subroutines. The USSFM V1.0 was validated with experimental data from the Enercon USS gasifier. The calculated USS mixture had a trace of oxygen, validating the initial expectation of creating an oxygen-free environment in the gasifier. Simulations showed that the USS mixture could satisfy the gasification heat requirement without partial carbon combustion. The USSFM V1.0 had good predictions on the H2% in all tests, and on other variables at a level of the lower oxygen feed. Provided with higher oxygen feed, the USSFM V1.0 simulated hotter temperatures, higher CO% and lower CO2%. Errors were explained by assumptions of equilibrium combustion, adiabatic reactors, reaction kinetics, etc. By investigating specific modeling data, gas-particle convective heat transfers were found to be critical in energy balance equations of both emulsion gas and particles, while bubble size controlled both the mass and energy balance equations of bubble gas. Parametric study

  11. An experimental study of evaporation waves in a superheated liquid

    Science.gov (United States)

    Hill, Larry G.

    1990-01-01

    Evaporation waves in superheated liquids are studied using a rapid-depressurization facility consisting of a vertical glass test cell situated beneath a large, low-pressure reservoir. The objective of this study is to learn more about the physical mechanisms of explosive boiling (of which an evaporation wave is a specific example), as well as properties of the flow it produces.The test cell is initially sealed from the reservoir by a foil diaphragm, and is partially filled with a volatile liquid (Refrigerant 12 or 114). An experiment is initiated by rupturing the diaphragm via a pneumatically driven cutter. The instrumentation consists of fast-response pressure measurements, high-speed motion pictures, and spark-illuminated still photographs. The liquid temperature is typically 20°C; the liquid superheat is controlled by setting the reservoir pressure to values between vacuum and 1 atm. The pressures subsequent to depressurization are very much less than the critical pressure, and the initial temperatures are sufficiently low that, although the test liquid is highly superheated, the superheat limit is not approached. Evaporation waves in which bubble nucleation within the liquid column is suppressed entirely are considered almost exclusively.When the diaphragm is ruptured, the liquid pressure drops to virtually the reservoir value within a few milliseconds. Provided that the liquid superheat so obtained is sufficiently high, the free surface then erupts in a process known as explosive boiling, which is characterized by violent, fine-scale fragmentation of the superheated liquid and extremely rapid evaporation. The explosive boiling process proceeds as a "wavefront" into the liquid column, producing a highspeed, two-phase flow that travels upward into the low-pressure reservoir, emptying the test cell in a few hundred milliseconds. The speed of the wavefront varies between 0.2 and 0.6 m/s, depending on run conditions; the corresponding two-phase flow varies between

  12. Utilization of virtual reality for reading the superheated emulsion detector

    Energy Technology Data Exchange (ETDEWEB)

    Santos Sobrinho, Jose C.; Santo, Andre C.E.; Pereira, Claudio M.N.A.; Mol, Antonio C.A., E-mail: volksparati@hotmail.com, E-mail: cotelli.andre@gmail.com, E-mail: cmnap@ien.gov.br, E-mail: mol@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    This paper presents a method based on Virtual Reality for reading the Superheated Emulsion Detector (Bubble Detector). The proposed method is an alternative to: automatic counters offered by the manufacturers of detectors, since they have a relatively high cost (acquisition, maintenance and periodic calibration), and visual counting of detectors, since it only has an advantage when there are a small number of bubbles. The method starts with the collection of detector's digital images in order to obtain a sequence of images to create an animation that is displayed with the help of Virtual Reality. To this end, it is modeled, using OpenGL graphics library, a virtual environment for visualizing and manipulating virtual detector. It is made, then a calibration of this virtual environment thus ensuring the correspondence of the model with reality. The reading of the detector (bubbles count) is made visually by the user with the assistance of stereo vision and a 3D cursor to navigation, marking and counting the bubbles. The user views a further auxiliary display that shows the three-dimensional cursor position, the labeled amount of bubbles and the measured dose. After testing, the following results were achieved: better precision in counting the bubbles compared with the 10% reported by the manufacturer of the automatic reader; achieving a low cost tool that requires no calibration constant in the process of maintenance and/or lifetime; minimizing the problem of manual counting for large number of bubbles and ease of use, because can be operated by a common user. (author)

  13. Nanospiral Formation by Droplet Drying: One Molecule at a Time

    OpenAIRE

    Wan Lei; Li Li; Mao Guangzhao

    2010-01-01

    Abstract We have created nanospirals by self-assembly during droplet evaporation. The nanospirals, 60–70 nm in diameter, formed when solvent mixtures of methanol and m-cresol were used. In contrast, spin coating using only methanol as the solvent produced epitaxial films of stripe nanopatterns and using only m-cresol disordered structure. Due to the disparity in vapor pressure between the two solvents, droplets of m-cresol solution remaining on the substrate serve as templates for the s...

  14. Nucleation efficiency of R134a as a sensitive liquid for superheated drop emulsion detector

    Indian Academy of Sciences (India)

    Mala Das; R Sarkar; P K Mondal; S Saha; B K Chatterjee; S C Roy

    2010-10-01

    Superheated emulsion detector is known to detect neutrons, γ-rays and other charged particles. The present work includes the study of nucleation efficiency of super-heated drops of one of the CFC-free liquids, R134a (C2H2F4), to fast neutrons, its response to -rays from 241Am and 137Cs and compare its nucleation efficiency with that of R12. The observation indicates that because of the presence of hydrogen, the nucleation efficiency is less in R134a than in R12 in the present neutron energy range of considera-tion. R134a is one of the most environment-friendly, commercially available liquid that is suitable for superheated drop detector, specially in neutron dosimetry and one needs to investigate it in detail.

  15. SIMULATION OF THE TWO PHASE FLOW OF DROPLET IMPINGEMENT ON LIQUID FILM BY THE LATTICE BOLTZMANN METHOD

    Institute of Scientific and Technical Information of China (English)

    GUO Jia-hong; WANG Xiao-yong

    2012-01-01

    A Lattice Boltzmann Method (LBM) with two-distribution functions is employed for simulating the two-phase flow induced by a liquid droplet impinging onto the film of the same liquid on solid surface.The model is suitable for solution of twophase flow problem at high density and viscosity ratios of liquid to vapor and phase transition between liquid and its vapor.The roles of the vapor flow,the density ratio of liquid to vapor and the surface tension of the droplet in the splashing formation are discussed.It is concluded that the vapour flow induced by the droplet fall and splash in the whole impinging process may affect remarkably the splash behaviour.For the case of large density ratio of liquid to vapor a crown may engender after the droplet collides with the film.However,for the case of small density ratio of liquid to vapor a “bell” like splash may be observed.

  16. Kinetics of wet sodium vapor complex plasma

    Science.gov (United States)

    Mishra, S. K.; Sodha, M. S.

    2014-04-01

    In this paper, we have investigated the kinetics of wet (partially condensed) Sodium vapor, which comprises of electrons, ions, neutral atoms, and Sodium droplets (i) in thermal equilibrium and (ii) when irradiated by light. The formulation includes the balance of charge over the droplets, number balance of the plasma constituents, and energy balance of the electrons. In order to evaluate the droplet charge, a phenomenon for de-charging of the droplets, viz., evaporation of positive Sodium ions from the surface has been considered in addition to electron emission and electron/ion accretion. The analysis has been utilized to evaluate the steady state parameters of such complex plasmas (i) in thermal equilibrium and (ii) when irradiated; the results have been graphically illustrated. As a significant outcome irradiated, Sodium droplets are seen to acquire large positive potential, with consequent enhancement in the electron density.

  17. Development of the mathematical model of heat and mass transfer for researching the processes of evaporation of inhomogeneous water droplets

    Directory of Open Access Journals (Sweden)

    Antonov Dmitry

    2017-01-01

    Full Text Available On the basis of experimental date the heat and mass transfer models are developed in ANSYS Fluent software package for researching the processes of evaporation of inhomogeneous water droplets. The influence of the temperature of the gases (550-850 K on the evaporation of inhomogeneous water droplets is estimated. Times of complete liquid evaporation from free surface of inhomogeneous water droplets and explosive vaporization of water droplets at different gas temperatures are established.

  18. Evaporation of an inkjet droplet on a flat substrate

    Science.gov (United States)

    Masuda, Takashi; Shimoda, Tatsuya

    2017-01-01

    Understanding the evaporation behavior of inkjet droplets has become increasingly important as printed electronic technology develops. In this study, the evaporation phenomena of a 5-6-pL droplet were studied. Four types of non-polar liquid droplets were prepared via the inkjet method and placed on substrates with small contact-angle hystereses. The observed contact radius and contact angle during evaporation were in good agreement with the theoretical model. This model, that of diffusion-controlled evaporation, was obtained based on a microliter droplet or bulk liquid wherein the evaporation was considered to be a quasi-steady state. The square of contact radius R decreased linearly with the evaporation time t, and the gradient of the R 2 vs t plot provided the diffusivity of vapor in the air. The experimentally obtained diffusivity values were helpful for estimating the evaporation speeds and times of droplets at any contact angle.

  19. Nanospiral Formation by Droplet Drying: One Molecule at a Time

    Directory of Open Access Journals (Sweden)

    Wan Lei

    2011-01-01

    Full Text Available Abstract We have created nanospirals by self-assembly during droplet evaporation. The nanospirals, 60–70 nm in diameter, formed when solvent mixtures of methanol and m-cresol were used. In contrast, spin coating using only methanol as the solvent produced epitaxial films of stripe nanopatterns and using only m-cresol disordered structure. Due to the disparity in vapor pressure between the two solvents, droplets of m-cresol solution remaining on the substrate serve as templates for the self-assembly of carboxylic acid molecules, which in turn allows the visualization of solution droplet evaporation one molecule at a time.

  20. Nanospiral Formation by Droplet Drying: One Molecule at a Time.

    Science.gov (United States)

    Wan, Lei; Li, Li; Mao, Guangzhao

    2011-12-01

    We have created nanospirals by self-assembly during droplet evaporation. The nanospirals, 60-70 nm in diameter, formed when solvent mixtures of methanol and m-cresol were used. In contrast, spin coating using only methanol as the solvent produced epitaxial films of stripe nanopatterns and using only m-cresol disordered structure. Due to the disparity in vapor pressure between the two solvents, droplets of m-cresol solution remaining on the substrate serve as templates for the self-assembly of carboxylic acid molecules, which in turn allows the visualization of solution droplet evaporation one molecule at a time.

  1. Casting structure of pure aluminum by electric pulse modification at different superheated temperatures

    Institute of Scientific and Technical Information of China (English)

    Jingang Qi; Jianzhong Wang; Xingjiang Liu; Bing Wang; Daqiang Cang

    2005-01-01

    Electric pulse modification (EPM) is a novel technique that reduces grain size by altering the structure of a melt. It was investigated that the response of the casting structure of high pure aluminum to EPM in different superheated melts. The results indicate that the grain refining effect of a given pulse electric field holds an optimal temperature range, moreover, a lower or higher superheated temperature will both disadvantage the improvements of casting structure. It essentially lies in the cooperative action between the distorted absorption of clusters and the activated capability of atoms in the aluminum melt.

  2. Static and dynamic superheated water extraction of essential oil components from Thymus vulgaris L.

    Science.gov (United States)

    Dawidowicz, Andrzej L; Rado, Ewelina; Wianowska, Dorota

    2009-09-01

    Superheated water extraction (SWE) performed in both static and dynamic condition (S-SWE and D-SWE, respectively) was applied for the extraction of essential oil from Thymus vulgaris L. The influence of extraction pressure, temperature, time, and flow rate on the total yield of essential oil and the influence of extraction temperature on the extraction of some chosen components are discussed in the paper. The SWE extracts are related to PLE extracts with n-hexane and essential oil obtained by steam distillation. The superheated water extraction in dynamic condition seems to be a feasible option for the extraction of essential oil components from T. vulgaris L.

  3. PID Controller Parameters Tuning Based-on Satisfaction for Superheated Steam Temperature of Power Station Boiler

    Directory of Open Access Journals (Sweden)

    Benxian Xiao

    2014-06-01

    Full Text Available Proposed the PID controller parameters tuning method based-on New Luus-Jaakola (NLJ algorithm and satisfaction idea. According to the different requirements of each performance index, designed the satisfaction function with fuzzy constraint attributes, and then determined the comprehensive satisfaction function for PID tuning by NLJ algorithm. Provided the steps of PID controller parameters tuning based on the NLJ algorithm and satisfaction, and applied this tuning method to the cascade control system of superheated steam temperature for Power Station Boiler. Finally the simulation and experiment results have shown the proposed method has good dynamic and static control performances for this complicated superheated steam temperature control system.

  4. Liquid droplet movement on horizontal surface with gradient surface energy

    Institute of Scientific and Technical Information of China (English)

    LIAO Qiang; WANG Hong; ZHU Xun; LI Mingwei

    2006-01-01

    A surface with gradient surface energy was fabricated on a silicon wafer by using the chemical vapor deposition (CVD) technology with the dodecyltrichlorosilane (C12H25Cl3Si) vapor which was adsorbed chemically on the surface of the silicon wafer to form a self-assemble monolayer (ASM) and thus a gradient profile of wettability. The microscopic contours of the gradient surface were measured with Seiko SPA400 atom force microscope (AFM). And the surface wettability profile was characterized by the sessile drop method, measuring the contact angle of fine water droplets that lay on the gradient surface, to represent the distribution of the surface energy on the surface. Using a high-speed video imaging system, the motion of water droplet on the horizontal gradient surface was visualized and the transient velocity was measured under ambient condition. The experimental results show that the liquid droplets can be driven to move from hydrophobic side to hydrophilic side on the horizontal gradient surface and the velocity of droplet can reach up to 40 mm/s. In addition, the motion of the water droplet can be generally divided into two stages: an acceleration stage and a deceleration stage. The droplet presents a squirming movement on the surface with a lower peak velocity and a larger extent of deceleration motion. And the static advancing contact angle of the droplet is obviously larger than the dynamic advancing contact angle on the gradient energy surface.

  5. Insight into the Evaporation Dynamics of a Pair of Sessile Droplets on a Hydrophobic Substrate.

    Science.gov (United States)

    Shaikeea, Angkur Jyoti Dipanka; Basu, Saptarshi

    2016-02-09

    In this work, we have demonstrated three unique regimes in the evaporation lifecycle of a pair of sessile droplets placed in variable proximity on a hydrophobic substrate. For small separation distance, the droplets undergo asymmetric spatiotemporal evaporation leading to contact angle hysteresis and suppressed vaporization. The reduced evaporation has been attributed quantitatively to the existence of a constrained vapor-rich dome between the two droplets. However, a dynamic decrease in the droplet radius due to solvent removal marks a return to symmetry in terms of evaporation and contact angle. We have described the variation in evaporation flux using a universal correction factor. We have also demonstrated the existence of a critical separation distance beyond which the droplets in the droplet pair do not affect each other. The results are crucial to a plethora of applications ranging from surface patterning to lab-on-a-chip devices.

  6. Dynamics of droplets

    Energy Technology Data Exchange (ETDEWEB)

    Frohn, A.; Roth, N. [Stuttgart Univ. (Germany). Inst. fuer Thermodynamik der Luft- und Raumfahrt

    2000-07-01

    Intended to privide an up-to-date overview of the field, this book is also likely to become a standard work of reference on the science of droplets. Beginning with the theoretical background important for droplet dynamics, it continues with a presentation of the various methods for generating single droplets and regular droplet systems. Also included is a detailed description of the experimental methods employed in droplet research. A special chapter is devoted to the various types of droplet interactions without phase transition. A separate chapter then treats many examples of the possible phase transition processes. The final part of the book gives a summary of important applications. With its comprehensive content, this book will be of interest to all scientists and lecturers concerned with two-phase flow, spray technology, heterogeneous combustion, and aerosol science. (orig.)

  7. Investigation of Regularities of Heat and Mass Transfer and Phase Transitions during Water Droplets Motion through High-Temperature Gases

    Directory of Open Access Journals (Sweden)

    Roman S. Volkov

    2014-06-01

    Full Text Available The macroscopic regularities of heat and mass transfer and phase transitions during water droplets motion through high-temperature (more than 1000 K gases have been investigated numerically and experimentally. Water droplet evaporation rates have been established. Gas and water vapors concentrations and also temperature values of gas-vapor mixture in small neighborhood and water droplet trace have been singled out. Possible mechanisms of droplet coagulation in high-temperature gas area have been determined. Experiments have been carried out with the optical methods of two-phase gas-vapor-droplet mixtures diagnostics (“Particle Image Velocimetry” and “Interferometric Particle Imaging” usage to assess the adequateness of developed heat and mass transfer models and the results of numerical investigations. The good agreement of numerical and experimental investigation results due to integral characteristics of water droplet evaporation has been received.

  8. A MATHEMATICAL MODEL OF THE ROASTING CHESTNUTS PROCESS BY SUPERHEATED STEAM

    Directory of Open Access Journals (Sweden)

    A. N. Ostrikov

    2013-01-01

    Full Text Available The mathematic modeling for chestnuts roasting process by superheated steam is conducted. Diffusion and thermal diffusion coefficients are used for process description. Initial conditions and boundary conditions of the third kind for thermal conductivity and mass transfer equations are set.

  9. Correlation Between Superheated Liquid Fragility And Onset Temperature Of Crystallization For Al-Based Amorphous Alloys

    Directory of Open Access Journals (Sweden)

    Guo J.

    2015-06-01

    Full Text Available Amorphous alloys or metallic glasses have attracted significant interest in the materials science and engineering communities due to their unique physical, mechanical, and chemical properties. The viscous flow of amorphous alloys exhibiting high strain rate sensitivity and homogeneous deformation is considered to be an important characteristic in thermoplastic forming processes performed within the supercooled liquid region because it allows superplastic-like deformation behavior. Here, the correlation between the superheated liquid fragility, and the onset temperature of crystallization for Al-based alloys, is investigated. The activation energy for viscous flow of the liquid is also investigated. There is a negative correlation between the parameter of superheated liquid fragility and the onset temperature of crystallization in the same Al-based alloy system. The activation energy decreases as the onset temperature of crystallization increases. This indicates that the stability of a superheated liquid can affect the thermal stability of the amorphous alloy. It also means that a liquid with a large superheated liquid fragility, when rapidly solidified, forms an amorphous alloy with a low thermal stability.

  10. Inhibition of lipid oxidation in pork bundles processing by superheated steam frying.

    Science.gov (United States)

    Huang, Tzou-Chi; Ho, Chi-Tang; Fu, Hui-Yin

    2004-05-19

    The effect of superheated steam treatment on the oxidative stability of lipids in packaged Zousoon (pork bundles) was investigated. The aroma quality of Zousoon samples was evaluated by sensory analysis and chromatographic analysis of volatiles. Results of this study indicated that oxidation of lipids occurred in pan-fried Zousoon after prolonged storage. Significant amounts of highly volatile compounds such as formaldehyde, acetaldehyde, acetone, and hexanal in Zousoon were identified by a modified method of cysteamine derivatization followed by gas chromatography-mass spectrometry (GC-MS) analysis. Superheated steam was found to be effective in suppressing lipid oxidation in canned Zousoon as compared with Zousoon fried by the conventional method in a frying pan. The superheated steam-fried samples had relatively low thiobarbituric acid reactive substance (TBARS) and peroxide (POV) values before and after storage, whereas samples prepared by pan frying had relatively high TBARS and POV values before and after storage. Superheated steam-fried Zousoon had superior lipid stability to that prepared by the conventional pan-frying method.

  11. Effect of Melt Superheating Treatment on Directional Solidification Interface Morphology of Multi-component Alloy

    Institute of Scientific and Technical Information of China (English)

    Changshuai Wang; Jun Zhang; Lin Liu; Hengzhi Fu

    2011-01-01

    The influence of melt superheating treatment on the solid/liquid (S/L) interface morphology of directionally solidified Ni-based superalloy DZ125 is investigated to elucidate the relationship between melt characteristic and S/L interface stability. The results indicate that the interface morphology is not only related to the withdrawal velocity (R) but also to the melt superheating temperature (Ts) when the thermal gradient of solidification interface remains constant for different Ts with appropriate superheating treatment regulation. The interface morphology changes from cell to plane at R of 1.1 μm/s when Ts increases from 1500°C to 1650°C, and maintains plane with further elevated Ts of 1750°C. However, the interface morphology changes from coarse dendrite to cell and then to cellular dendrite at R of 2.25 μm/s when Ts increases from 1500°C to 1650°C and then to 1750°C. It is proved that the solidification onset temperature and the solidification interval undergo the nonlinear variation when Ts increases from 1500°C to 1680°C, and the turning point is 1650°C at which the solidification onset temperature and the solidification interval are all minimum. This indicates that the melt superheating treatment enhances the solidification interface stability and has important effect on the solidification characteristics.

  12. Microwave super-heated boiling of organic liquids: Origin, effect and application

    NARCIS (Netherlands)

    Chemat, F.; Esveld, E.

    2001-01-01

    This paper reports the state of the art of the microwave super-heated boiling phenomenon. When a liquid is heated by microwaves, the temperature increases rapidly to reach a steady temperature while refluxing. It happens that this steady state temperature can be up to 40 K higher than the boiling po

  13. Levitated droplet dye laser

    DEFF Research Database (Denmark)

    Azzouz, H.; Alkafadiji, L.; Balslev, Søren

    2006-01-01

    a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating...

  14. Droplet collisions in turbulence

    NARCIS (Netherlands)

    Oldenziel, G.

    2014-01-01

    Liquid droplets occur in many natural phenomena and play an important role in a large number of industrial applications. One of the distinct properties of droplets as opposed to solid particles is their ability to merge, or coalesce upon collision. Coalescence of liquid drops is of importance in for

  15. Droplet collisions in turbulence

    NARCIS (Netherlands)

    Oldenziel, G.

    2014-01-01

    Liquid droplets occur in many natural phenomena and play an important role in a large number of industrial applications. One of the distinct properties of droplets as opposed to solid particles is their ability to merge, or coalesce upon collision. Coalescence of liquid drops is of importance in for

  16. Self-propelled droplets

    Science.gov (United States)

    Seemann, Ralf; Fleury, Jean-Baptiste; Maass, Corinna C.

    2016-11-01

    Self-propelled droplets are a special kind of self-propelled matter that are easily fabricated by standard microfluidic tools and locomote for a certain time without external sources of energy. The typical driving mechanism is a Marangoni flow due to gradients in the interfacial energy on the droplet interface. In this article we review the hydrodynamic prerequisites for self-sustained locomotion and present two examples to realize those conditions for emulsion droplets, i.e. droplets stabilized by a surfactant layer in a surrounding immiscible liquid. One possibility to achieve self-propelled motion relies on chemical reactions affecting the surface active properties of the surfactant molecules. The other relies on micellar solubilization of the droplet phase into the surrounding liquid phase. Remarkable cruising ranges can be achieved in both cases and the relative insensitivity to their own `exhausts' allows to additionally study collective phenomena.

  17. Experimental analysis of shape deformation of evaporating droplet using Legendre polynomials

    Energy Technology Data Exchange (ETDEWEB)

    Sanyal, Apratim [Department of Mechanical Engineering, Indian Institute of Science, Bangalore 560012 (India); Basu, Saptarshi, E-mail: sbasu@mecheng.iisc.ernet.in [Department of Mechanical Engineering, Indian Institute of Science, Bangalore 560012 (India); Kumar, Ranganathan [Department of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL 32816 (United States)

    2014-01-24

    Experiments involving heating of liquid droplets which are acoustically levitated, reveal specific modes of oscillations. For a given radiation flux, certain fluid droplets undergo distortion leading to catastrophic bag type breakup. The voltage of the acoustic levitator has been kept constant to operate at a nominal acoustic pressure intensity, throughout the experiments. Thus the droplet shape instabilities are primarily a consequence of droplet heating through vapor pressure, surface tension and viscosity. A novel approach is used by employing Legendre polynomials for the mode shape approximation to describe the thermally induced instabilities. The two dominant Legendre modes essentially reflect (a) the droplet size reduction due to evaporation, and (b) the deformation around the equilibrium shape. Dissipation and inter-coupling of modal energy lead to stable droplet shape while accumulation of the same ultimately results in droplet breakup.

  18. Stochastic kinetics reveal imperative role of anisotropic interfacial tension to determine morphology and evolution of nucleated droplets in nematogenic films

    Science.gov (United States)

    Bhattacharjee, Amit Kumar

    2017-01-01

    For isotropic fluids, classical nucleation theory predicts the nucleation rate, barrier height and critical droplet size by ac- counting for the competition between bulk energy and interfacial tension. The nucleation process in liquid crystals is less understood. We numerically investigate nucleation in monolayered nematogenic films using a mesoscopic framework, in par- ticular, we study the morphology and kinetic pathway in spontaneous formation and growth of droplets of the stable phase in the metastable background. The parameter κ that quantifies the anisotropic elastic energy plays a central role in determining the geometric structure of the droplets. Noncircular nematic droplets with homogeneous director orientation are nucleated in a background of supercooled isotropic phase for small κ. For large κ, noncircular droplets with integer topological charge, accompanied by a biaxial ring at the outer surface, are nucleated. The isotropic droplet shape in a superheated nematic background is found to depend on κ in a similar way. Identical growth laws are found in the two cases, although an unusual two-stage mechanism is observed in the nucleation of isotropic droplets. Temporal distributions of successive events indi- cate the relevance of long-ranged elasticity-mediated interactions within the isotropic domains. Implications for a theoretical description of nucleation in anisotropic fluids are discussed. PMID:28054600

  19. Stochastic kinetics reveal imperative role of anisotropic interfacial tension to determine morphology and evolution of nucleated droplets in nematogenic films

    Science.gov (United States)

    Bhattacharjee, Amit Kumar

    2017-01-01

    For isotropic fluids, classical nucleation theory predicts the nucleation rate, barrier height and critical droplet size by ac- counting for the competition between bulk energy and interfacial tension. The nucleation process in liquid crystals is less understood. We numerically investigate nucleation in monolayered nematogenic films using a mesoscopic framework, in par- ticular, we study the morphology and kinetic pathway in spontaneous formation and growth of droplets of the stable phase in the metastable background. The parameter κ that quantifies the anisotropic elastic energy plays a central role in determining the geometric structure of the droplets. Noncircular nematic droplets with homogeneous director orientation are nucleated in a background of supercooled isotropic phase for small κ. For large κ, noncircular droplets with integer topological charge, accompanied by a biaxial ring at the outer surface, are nucleated. The isotropic droplet shape in a superheated nematic background is found to depend on κ in a similar way. Identical growth laws are found in the two cases, although an unusual two-stage mechanism is observed in the nucleation of isotropic droplets. Temporal distributions of successive events indi- cate the relevance of long-ranged elasticity-mediated interactions within the isotropic domains. Implications for a theoretical description of nucleation in anisotropic fluids are discussed.

  20. Source of temperature and pressure pulsations during sessile droplet evaporation into multicomponent atmospheres.

    Science.gov (United States)

    Persad, Aaron H; Sefiane, Khellil; Ward, Charles A

    2013-10-29

    During sessile droplet evaporation, studies with IR thermography and shadowgraphs have indicated temperature pulsations. We confirm those observations with microthermocouples, but microthermocouples also indicate temperature pulsations in the atmosphere of the droplet. The pressure in this atmosphere pulsated as well and was correlated with the temperature pulsations in the droplet. Also, we find that if a droplet evaporates into its own vapor, there are no temperature or pressure pulsations. The pulsations occur only if the droplet evaporates into an atmosphere with a component having a heat of solution with the droplet when it adsorbs-absorbs. None of the currently proposed mechanisms for the temperature pulsations provide an explanation for the coupling between the temperature pulsations in the droplet and the vapor-phase pressure pulsations, and for the absence of the pulsations when the system is single-component. As a mechanism for the pulsations, we propose that when a droplet is exposed to an atmosphere containing a component that has a heat of solution with the droplet, energy will be released from adsorption-absorption. This energy will cause pulsations in the evaporation flux, and these pulsations could cause the observed temperature and pressure pulsations. We examine this mechanism by showing that, if the measured temperature pulsations in a water droplet exposed to a methanol atmosphere are used as the input to a theory of evaporation kinetics (statistical rate theory), the pressure pulsations of the water vapor in the methanol atmosphere are predicted and agree with those measured with a quadrupole mass analyzer. When the inputs and outputs are reversed in the theory, we find that the temperature pulsations in the droplet are correctly predicted from the measured water vapor pulsations in the atmosphere.

  1. Investigation of droplet formation in pulsed Nd:YAG laser deposition of metals and silicon

    Energy Technology Data Exchange (ETDEWEB)

    Siew, Wee-Ong; Lee, Wai-Keat; Wong, Hin-Yong; Tou, Teck-Yong [Multimedia University, Faculty of Engineering, Cyberjaya, Selangor (Malaysia); Yong, Thian-Khok [Multimedia University, Faculty of Engineering, Cyberjaya, Selangor (Malaysia); Universiti Tunku Abdul Rahman, Faculty of Engineering and Science, Kuala Lumpur (Malaysia); Yap, Seong-Shan [Multimedia University, Faculty of Engineering, Cyberjaya, Selangor (Malaysia); Norwegian University of Science and Technology, Institute of Physics, Trondheim (Norway)

    2010-12-15

    In the process of pulsed laser deposition of nickel (Ni) and ruthenium (Ru) thin films, the occurrence of phase explosion in ablation was found to affect the deposition rate and enhance the optical emissions from the plasma plume. Faster thin-film growth rates coincide with the onset of phase explosion as a result of superheating and/or sub-surface boiling which also increased the particulates found on the thin-film surface. These particulates were predominantly droplets which may not be round but flattened and also debris for the case of silicon (Si) ablation. The droplets from Ni and Ru thin films were compared in terms of size distribution and number density for different laser fluences. The origins of these particulates were correlated to the bubble and ripple formations on the targets while the transfer to the thin film surface was attributed to the laser-induced ejection from the targets. (orig.)

  2. Nucleation of liquid droplets and voids in a stretched Lennard-Jones fcc crystal.

    Science.gov (United States)

    Baidakov, Vladimir G; Tipeev, Azat O

    2015-09-28

    The method of molecular dynamics simulation has been used to investigate the phase decay of a metastable Lennard-Jones face-centered cubic crystal at positive and negative pressures. It is shown that at high degrees of metastability, crystal decay proceeds through the spontaneous formation and growth of new-phase nuclei. It has been found that there exists a certain boundary temperature. Below this temperature, the crystal phase disintegrates as the result of formation of voids, and above, as a result of formation of liquid droplets. The boundary temperature corresponds to the temperature of cessation of a crystal-liquid phase equilibrium when the melting line comes in contact with the spinodal of the stretched liquid. The results of the simulations are interpreted in the framework of classical nucleation theory. The thermodynamics of phase transitions in solids has been examined with allowance for the elastic energy of stresses arising owing to the difference in the densities of the initial and the forming phases. As a result of the action of elastic forces, at negative pressures, the boundary of the limiting superheating (stretching) of a crystal approaches the spinodal, on which the isothermal bulk modulus of dilatation becomes equal to zero. At the boundary of the limiting superheating (stretching), the shape of liquid droplets and voids is close to the spherical one.

  3. Vortex formation in coalescence of droplets with a reservoir using molecular dynamics simulations.

    Science.gov (United States)

    Taherian, Fereshte; Marcon, Valentina; Bonaccurso, Elmar; van der Vegt, Nico F A

    2016-10-01

    The flow patterns generated by the coalescence of aqueous ethanol droplets with a water reservoir are investigated using molecular dynamics simulations. The influence of surface tension gradient, which leads to the spreading of the droplet along the liquid-vapor interface of the reservoir, is studied by changing the ethanol concentration of the droplet. The internal circulation (vortex strength) of the droplet and the reservoir are analyzed separately. Simulation results reveal the formation of swirling flows within the droplet at early times when the radius of the coalescence neck due to the capillary forces increases rapidly with time. The vortex strength is found to be higher at lower concentrations of ethanol (higher liquid-vapor surface tension of the droplet), where the driving force for the contact line movement (capillary force) is stronger. The circulation diminishes by moving the center of mass of the droplet toward the reservoir. The lower surface tension of the droplet compared to the reservoir leads to surface tension gradient driven flow, which transports the droplet molecules along the liquid-vapor interface of the reservoir. Such a flow motion results in the generation of convective flows in the underlying water, which forms swirling flows within the reservoir. Therefore, the vortex strength of the reservoir is higher at higher ethanol concentrations of the droplet. The reservoir circulation decays to zero as soon as the ethanol concentration becomes homogeneous along the interface of the pool. The time evolution of circulation within the droplet and the reservoir are correlated with the center of mass motion of the droplet toward the surface, the time variation of the precursor film radius and the dynamic surface tension of the reservoir.

  4. Experimental research of heterogeneous nuclei in superheated steam

    Directory of Open Access Journals (Sweden)

    Bartoš Ondřej

    2016-01-01

    Full Text Available A mobile steam expansion chamber has been developed to investigate experimentally homogeneous and heterogeneous nucleation processes in steam, both in the laboratory and at power plants using the steam withdrawn from the steam turbine. The purpose of the device is to provide new insight into the physics of nonequilibrium wet steam formation, which is one of the factors limiting the efficiency and reliability of steam turbines. The expanded steam or a mixture of steam with a non-condensable gas rapidly expands in the expansion chamber. Due to adiabatic cooling, the temperature drops below the dew point of the steam at a given pressure. When reaching a sufficiently high supersaturation, droplets are nucleated. By tuning the supersaturation in the so-called nucleation pulse, particles of various size ranges can be activated. This fact is used in the present study to measure the aerosol particles present in the air. Homogeneous nucleation was negligible in this case. The experiment demonstrates the functionality of the device, data acquisition system and data evaluation methods.

  5. Experimental research of heterogeneous nuclei in superheated steam

    Science.gov (United States)

    Bartoš, Ondřej; Kolovratník, Michal; Šmíd, Bohuslav; Hrubý, Jan

    2016-03-01

    A mobile steam expansion chamber has been developed to investigate experimentally homogeneous and heterogeneous nucleation processes in steam, both in the laboratory and at power plants using the steam withdrawn from the steam turbine. The purpose of the device is to provide new insight into the physics of nonequilibrium wet steam formation, which is one of the factors limiting the efficiency and reliability of steam turbines. The expanded steam or a mixture of steam with a non-condensable gas rapidly expands in the expansion chamber. Due to adiabatic cooling, the temperature drops below the dew point of the steam at a given pressure. When reaching a sufficiently high supersaturation, droplets are nucleated. By tuning the supersaturation in the so-called nucleation pulse, particles of various size ranges can be activated. This fact is used in the present study to measure the aerosol particles present in the air. Homogeneous nucleation was negligible in this case. The experiment demonstrates the functionality of the device, data acquisition system and data evaluation methods.

  6. Waveguides for walking droplets

    CERN Document Server

    Filoux, Boris; Schlagheck, Peter; Vandewalle, Nicolas

    2015-01-01

    When gently placing a droplet onto a vertically vibrated bath, a drop can bounce permanently. Upon increasing the forcing acceleration, the droplet is propelled by the wave it generates and becomes a walker with a well defined speed. We investigate the confinement of a walker in different rectangular cavities, used as waveguides for the Faraday waves emitted by successive droplet bounces. By studying the walker velocities, we discover that 1d confinement is optimal for narrow channels. We also propose an analogy with waveguide models based on the observation of the Faraday instability within the channels.

  7. Numerical simulation of droplet evaporation between two circular plates

    Energy Technology Data Exchange (ETDEWEB)

    Bam, Hang Jin; Son, Gi Hun [Sogang University, Seoul (Korea, Republic of)

    2015-06-15

    Numerical simulation is performed for droplet evaporation between two circular plates. The flow and thermal characteristics of the droplet evaporation are numerically investigated by solving the conservation equations of mass, momentum, energy and mass fraction in the liquid and gas phases. The liquid-gas interface is tracked by a sharp-interface level-set method which is modified to include the effects of evaporation at the liquid-gas interface and contact angle hysteresis at the liquid-gas-solid contact line. An analytical model to predict the droplet evaporation is also developed by simplifying the mass and vapor fraction equations in the gas phase. The numerical results demonstrate that the 1-D analytical prediction is not applicable to the high rate evaporation process. The effects of plate gap and receding contact angle on the droplet evaporation are also quantified.

  8. The Reaction of Carbonates in Contact with Superheated Silicate Melts: New Insights from MEMIN Laser Melting Experiments

    Science.gov (United States)

    Hamann, C.; Hecht, L.; Schäffer, S.; Deutsch, A.; Lexow, B.

    2016-08-01

    The reaction of carbonates in contact with silicate impact melts is discussed quite controversially in the impact community. Here, we discuss four MEMIN laser melting experiments involving carbonates in contact with superheated silicate melts.

  9. Dancing droplets: Chemical space, substrates, and control

    Science.gov (United States)

    Cira, Nate; Benusiglio, Adrien; Prakash, Manu

    2015-11-01

    Previously we showed that droplets of propylene glycol and water display remarkable properties when placed on clean glass due to an interplay between surface tension and evaporation. (Cira, Benusiglio, Prakash: Nature, 2015). We showed that these mechanisms apply to a range of two-component mixtures of miscible liquids where one component has both higher surface tension and higher vapor pressure on a variety of high energy surfaces. We now show how this rule can be cheated using a simple trick. We go on to demonstrate applications for cleaning, and show how this system works on substrates prepared only with sunlight. We finish by demonstrating active control of droplets, allowing access to a host of new possibilities.

  10. Evaporation of bi-component droplets in a heated, highly turbulent flow

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, F.; Bazile, R. [Universite de Toulouse, INPT, UPS, IMFT, Institut de Mecanique des Fluides de Toulouse, Toulouse (France); CNRS, IMFT, Toulouse (France)

    2012-08-15

    This work aims to understand the phenomena that occur in a combustion chamber where multi-component fuel droplets are injected. Many evaporation models exist but the influence of turbulence on spray vaporization is not yet well understood. This study gives a useful database to improve these models. The objective of the work is to measure the dispersion and the evaporation of bi-component (octane/3-pentanone) droplets and the resulting vapor mixing in a well-known, heated, highly turbulent channel flow. The carrier flow shows high turbulence levels, flat profiles for the mean velocity and the velocity fluctuations. The injected droplets have a large variety of behaviors due to the large polydispersion and to the turbulence. The evolution of 3-pentanone liquid concentration, mass flux, and droplet clusters are described. Mean concentration, fluctuations of concentration, and mixing of the vapor phase are characterized. (orig.)

  11. Distillation-Based Droplet Modeling of Non-Ideal Oxygenated Gasoline Blends: Investigating the Role of Droplet Evaporation on PM Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Burke, Stephen C.; Ratcliff, Matthew; McCormick, Robert; Rhoads, Robert; Windom, Bret

    2017-03-28

    In some studies, a relationship has been observed between increasing ethanol content in gasoline and increased particulate matter (PM) emissions from vehicles equipped with spark ignition engines. The fundamental cause of the PM increase seen for moderate ethanol concentrations is not well understood. Ethanol features a greater heat of vaporization (HOV) than gasoline and also influences vaporization by altering the liquid and vapor composition throughout the distillation process. A droplet vaporization model was developed to explore ethanol's effect on the evaporation of aromatic compounds known to be PM precursors. The evolving droplet composition is modeled as a distillation process, with non-ideal interactions between oxygenates and hydrocarbons accounted for using UNIFAC group contribution theory. Predicted composition and distillation curves were validated by experiments. Detailed hydrocarbon analysis was applied to fuel samples and to distillate fractions, and used as input for the initial droplet composition. With composition calculated throughout the distillation, the changing HOV and other physical properties can be found using reference data. The droplet can thus be modeled in terms of energy transfer, which in turn provides the transient mass transfer, droplet temperature, and droplet diameter. Model predictions suggest that non-ideal vapor-liquid equilibrium along with an increase in HOV can alter the droplet composition evolution. Results predict that the presence of ethanol causes enrichment of the higher boiling fractions (T90+) in the aromatic components as well as lengthens the droplet lifetime. A simulation of the evaporation process in a transient environment as experienced within an engine cylinder predicts a decrease in mixing time of the heaviest fractions of the fuel prior to spark initiation, possibly explaining observations linking ethanol to PM.

  12. On the effects of isotropic turbulence on the evaporation rate of a liquid droplet

    Science.gov (United States)

    Dodd, Michael; Ferrante, Antonino

    2016-11-01

    Our objective is to explain the effects of isotropic turbulence on the vaporization rate of a liquid droplet in conditions that are relevant to spray combustion applications. To this end, we have performed direct numerical simulation (DNS) of a single droplet in homogeneous isotropic turbulence using the volume-of-fluid method for resolving fully the process of momentum, heat, and mass transfer between the liquid droplet and the gas. The simulations were performed using 10243 grid points. The effect of turbulence on the droplet vaporization rate is investigated by varying the gas-phase Reynolds number based on the Taylor microscale, Reλ. Reλ is increased from 0 to 75 by increasing the r.m.s. velocity of the gas phase while keeping all other physical properties constant. We will present the droplet evaporation rate as a function of turbulence Reynolds number and investigate the physical mechanisms.

  13. Droplet condensation and growth on nanotextured surfaces impregnated with an immiscible liquid

    Science.gov (United States)

    Anand, Sushant; Paxson, Adam; Smith, Jonathan; Dhiman, Rajeev; Varanasi, Kripa

    2012-02-01

    For effective dropwise condensation, a surface that sheds droplets easily is desirable due to the enhancement in accompanying heat transfer. Incorporating nano-textures on the surface can enhance the droplet shedding or spreading. We demonstrate that droplet shedding can be further influenced by impregnating the nano-textured surface with a liquid which is immiscible with respect to the droplet. In this study, the dynamics of dropwise condensation on such immiscible liquid impregnated nano-textured surfaces have been investigated in pure quiescent water vapor conditions. Condensation experiments were conducted using an Environmental Scanning Electron Microscope by controlling the chamber water vapor pressure and substrate temperature. We show preferential sites for condensation and different modes under which droplets grow, depending upon the surface chemistry, surface texture, and the impregnating liquid properties. Concurrently, we show an evolution of apparent contact angles during the condensation process on the impregnated surfaces.

  14. Electrostatic charging of jumping droplets

    Science.gov (United States)

    Miljkovic, Nenad; Preston, Daniel J.; Enright, Ryan; Wang, Evelyn N.

    2013-09-01

    With the broad interest in and development of superhydrophobic surfaces for self-cleaning, condensation heat transfer enhancement and anti-icing applications, more detailed insights on droplet interactions on these surfaces have emerged. Specifically, when two droplets coalesce, they can spontaneously jump away from a superhydrophobic surface due to the release of excess surface energy. Here we show that jumping droplets gain a net positive charge that causes them to repel each other mid-flight. We used electric fields to quantify the charge on the droplets and identified the mechanism for the charge accumulation, which is associated with the formation of the electric double layer at the droplet-surface interface. The observation of droplet charge accumulation provides insight into jumping droplet physics as well as processes involving charged liquid droplets. Furthermore, this work is a starting point for more advanced approaches for enhancing jumping droplet surface performance by using external electric fields to control droplet jumping.

  15. The evaporation behavior of sessile droplets from aqueous saline solutions.

    Science.gov (United States)

    Soulié, Virginie; Karpitschka, Stefan; Lequien, Florence; Prené, Philippe; Zemb, Thomas; Moehwald, Helmuth; Riegler, Hans

    2015-09-14

    Quantitative experiments on the evaporation from sessile droplets of aqueous saline (NaCl) solutions show a strong dependence on salt concentration and droplet shape. The experiments were performed with seven decades of initial NaCl concentrations, with various droplet sizes and with different contact angles. The evaporation rate is significantly lower for high salt concentrations and small contact angles than what is expected from the well-accepted diffusion-controlled evaporation scenario for sessile droplets, even if the change of the vapor pressure due to the salt is taken into account. Particle tracking velocimetry reveals that this modification of the evaporation behavior is caused by marangoni flows that are induced by surface tension gradients originating from the local evaporative peripheral salt enrichment. In addition it is found that already very low salt concentrations lead to a pinning of the three phase contact line. Whereas droplets with concentration ≥10(-6) M NaCl are pinned as soon as evaporation starts, droplets with lower salt concentration do evaporate in a constant contact angle mode. Aside from new, fundamental insights the findings are also relevant for a better understanding of the widespread phenomenon of corrosion initiated by sessile droplets.

  16. Bioprinting: Functional droplet networks

    Science.gov (United States)

    Durmus, Naside Gozde; Tasoglu, Savas; Demirci, Utkan

    2013-06-01

    Tissue-mimicking printed networks of droplets separated by lipid bilayers that can be functionalized with membrane proteins are able to spontaneously fold and transmit electrical currents along predefined paths.

  17. Butschli Dynamic Droplet System

    DEFF Research Database (Denmark)

    Armstrong, R.; Hanczyc, M.

    2013-01-01

    of a technology with living properties. Otto Butschli first described the system in 1898, when he used alkaline water droplets in olive oil to initiate a saponification reaction. This simple recipe produced structures that moved and exhibited characteristics that resembled, at least superficially, the amoeba. We......Dynamical oil-water systems such as droplets display lifelike properties and may lend themselves to chemical programming to perform useful work, specifically with respect to the built environment. We present Butschli water-in-oil droplets as a model for further investigation into the development...... to the oil phase), qualify this system as an example of living technology. The analysis of the Butschli droplets suggests that a set of conditions may precede the emergence of lifelike characteristics and exemplifies the richness of this rudimentary chemical system, not only for artificial life...

  18. Resonant and rolling droplet

    CERN Document Server

    Dorbolo, S; Vandewalle, N; Gilet, T

    2008-01-01

    When an oil droplet is placed on a quiescent oil bath, it eventually collapses into the bath due to gravity. The resulting coalescence may be eliminated when the bath is vertically vibrated. The droplet bounces periodically on the bath, and the air layer between the droplet and the bath is replenished at each bounce. This sustained bouncing motion is achieved when the forcing acceleration is higher than a threshold value. When the droplet has a sufficiently low viscosity, it significantly deforms : spherical harmonic \\boldmath{$Y_{\\ell}^m$} modes are excited, resulting in resonant effects on the threshold acceleration curve. Indeed, a lower acceleration is needed when $\\ell$ modes with $m=0$ are excited. Modes $m \

  19. Functions of the Coacervate Droplets

    Science.gov (United States)

    Okihana, Hiroyuki; Ponnamperuma, Cyril

    1982-12-01

    Functions of coacervate droplets as protocells are studied by using synthetic polymers. The coacervate droplets were made from PVA-A and PVA-S. When glycine or diglycine were in the surrounding medium, the coacervate droplets concentrated them. The concentration of glycine in the coacervate droplets was higher than that of diglycine. When this mixture was irradiated by UV light, the coacervate droplets protected them from the photochemical decomposition.

  20. Droplet impacts upon liquid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ching, B.; Golay, M.W.; Johnson, T.J.

    1984-11-02

    The absorption and rebounding of single droplets and streams of droplets (of diameter less than 1200 micrometers) impacting upon the surface of a deep liquid were examined experimentally. Conservation of mechanical energy and momentum were used to explain rebounding droplet interactions, and impaction criteria have been established regarding the absorption of droplet streams. Surface tension is the dominant mechanism governing the observed behavior. Single droplets were never observed to rebound.

  1. Archimedes Mass Filter Vaporizer

    Science.gov (United States)

    Putvinski, S.; Agnew, A. F.; Cluggish, B. P.; Ohkawa, T.; Sevier, L.; Umstadter, K. R.; Dresvin, S. V.; Kuteev, B. V.; Feygenson, O. N.; Ivanov, D. V.; Zverev, S. G.; Miroshnikov, I. V.; Egorov, S. M.; Kiesewetter, D. V.; Maliugin, V. I.

    2001-10-01

    Archimedes Technology Group, Inc., is developing a plasma mass separator called the Archimedes Filter that separates waste oxide mixtures ion by ion into two mass groups: light and heavy. Since high-level waste at Hanford has 99.9its radioactivity associated with heavy elements, the Archimedes Filter can effectively decontaminate over three-quarters of that waste. The Filter process involves some preprocessing followed by volatilization and separation by the magnetic and electric fields of the main plasma. This presentation describes the approach to volatilization of the waste oxy-hydroxide mixture by means of a very high heat flux (q > 10 MW/m2). Such a high heat flux is required to ensure congruent evaporation of the complex oxy-hydroxide mixture and is achieved by injection of small droplets of molten waste into an inductively coupled plasma (ICP) torch. This presentation further addresses different issues related to evaporation of the waste including modeling of droplet evaporation, estimates of parameters of plasma torch, and 2D modeling of the plasma. The experimental test bed for oxide vaporization and results of the initial experiments on oxide evaporation in 60 kW ICP torch will also be described.

  2. Superheating and melting behaviors of Ag clusters with Ni coating studied by molecular dynamics and experiments

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Using molecular dynamics with embedded-atom-type interatomicpotentials, we simulated the melting behavior of a spherical Ag3055 cluster coated with Ni. The semi-coherent Ag/Ni interface formed at low temperatures acts as an effective barrier against the surface melting and leads to a substantial superheating of the Ag cluster. The melting point was found to be about 100 K above the equilibrium melting point of the bulk Ag crystal (1230 K±15 K) and about 290 K above that (1040 K) of the free Ag3055 cluster. A superheating of 70 K was observed in the high-temperature differential scanning calorimetry measurement for Ag particles with a mean size of 30 nm embedded in Ni matrix prepared by means of melt-spinning. Melting is initiated locally at the defective interfacial area and then propagates inwards, suggesting a heterogeneously nucleated melting event at the Ag/Ni interface.

  3. Graphical procedure for comparing thermal death of Bacillus stearothermophilus spores in saturated and superheated steam.

    Science.gov (United States)

    SHULL, J J; ERNST, R R

    1962-09-01

    The thermal death curve of dried spores of Bacillus stearothermophilus in saturated steam was characterized by three phases: (i) a sharp initial rise in viable count; (ii) a low rate of death which gradually increased; and (iii) logarithmic death at maximal rate. The first phase was a reflection of inadequate heat activation of the spore population. The second and third phases represented the characteristic thermal death curve of the spores in saturated steam. A jacketed steam sterilizer, equipped with a system for initial evacuation of the chamber, was examined for superheat during normal operation. Measurements of spore inactivation and temperature revealed superheat in surface layers of fabrics being processed in steam at 121 C. The high temperature of the fabric surfaces was attributed to absorption of excess heat energy from superheated steam. The superheated steam was produced at the beginning of the normal sterilizing cycle by transfer of heat from the steam-heated jacket to saturated steam entering the vessel.

  4. Specific heat of superheated Al-10Sr alloy melts[Foundation item

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The specific heat of superheated Al-10Sr melts was determined at different heating rates between 1  K/min and 20  K/min using a differential scanning calorimeter(DSC). As a whole, the specific heat increases with increasing temperature. A hump is observed on the specific heat curve at the temperature corresponding to the phase boundary temperature dependent on heating rate. Moreover, the hump shifts to higher temperature in the measured temperature range from about 840  ℃ to 890  ℃ with increasing heating rate. At certain temperature in the higher superheated zone, the specific heat of the melt as a function of temperature shows a sharp rise . The result indicates that disorder zone fraction begins to increase while atom clusters fraction decreases at the breaking temperature.

  5. OCS in He droplets

    Energy Technology Data Exchange (ETDEWEB)

    Grebenev, V.

    2000-06-01

    Phenomenon of superfluidity of para-hydrogen (pH{sub 2}){sub 1-17} and helium {sup 4}He{sub 1-7000} systems doped with an OCS chromophore molecule was investigated in this work. The study of such systems became possible after the development of the depletion spectroscopy technique in helium droplets. The droplets can be easily created and doped with up to 100 particles such as OCS, para-hydrogen or ortho-hydrogen molecules and {sup 4}He atoms. The measured infrared depletion spectra give the information about the temperature of the droplets and their aggregate state. The depletion spectrum of OCS in pure {sup 4}He droplets was comprehensively studied. The rovibrational OCS spectrum shows well resolved narrow lines. The spectrum is shifted to the red relative to the corresponding gas phase spectrum and the rotational constant of OCS in {sup 4}He droplet is three times smaller than that for free molecule. Different models of OCS rotation in the helium environment were discussed. It was shown that the shapes of the rovibrational lines are defined mainly by inhomogeneous broadening due to the droplet size distribution. The sub-rotational structure of the OCS rovibrational lines was revealed in microwave-infrared double resonance experiments. This structure arises due to the interaction of the OCS with the He environment. However, the information obtained in the experiments was not enough to understand the nature of this interaction. (orig.)

  6. Droplet based microfluidics.

    Science.gov (United States)

    Seemann, Ralf; Brinkmann, Martin; Pfohl, Thomas; Herminghaus, Stephan

    2012-01-01

    Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

  7. Droplet based microfluidics

    Science.gov (United States)

    Seemann, Ralf; Brinkmann, Martin; Pfohl, Thomas; Herminghaus, Stephan

    2012-01-01

    Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

  8. Vapor Bubbles

    Science.gov (United States)

    Prosperetti, Andrea

    2017-01-01

    This article reviews the fundamental physics of vapor bubbles in liquids. Work on bubble growth and condensation for stationary and translating bubbles is summarized and the differences with bubbles containing a permanent gas stressed. In particular, it is shown that the natural frequency of a vapor bubble is proportional not to the inverse radius, as for a gas bubble, but to the inverse radius raised to the power 2/3. Permanent gas dissolved in the liquid diffuses into the bubble with strong effects on its dynamics. The effects of the diffusion of heat and mass on the propagation of pressure waves in a vaporous bubbly liquid are discussed. Other topics briefly touched on include thermocapillary flow, plasmonic nanobubbles, and vapor bubbles in an immiscible liquid.

  9. A new method for neutron depth dosimetry with the superheated drop detector

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, F.; Apfel, R.E. (Yale Univ., New Haven, CT (USA))

    1990-01-01

    Chemical composition and energy response of the Superheated Drop Detector (SDD) suggested to us a new technique for the direct measurement of dose equivalent depth distributions in tissue-equivalent phantoms, independently of impinging neutron spectra and energy degradation with depth. The SDD performance has been tested against the depth-dose curves published in NCRP Report 38. The experimental results, in agreement with the expected values, confirm the applicability of this method. (author).

  10. Droplet formation and growth inside a polymer network: A molecular dynamics simulation study

    Science.gov (United States)

    Jung, Jiyun; Jang, Eunseon; Shoaib, Mahbubul Alam; Jo, Kyubong; Kim, Jun Soo

    2016-04-01

    We present a molecular dynamics simulation study that focuses on the formation and growth of nanoscale droplets inside polymer networks. Droplet formation and growth are investigated by the liquid-vapor phase separation of a dilute Lennard-Jones (LJ) fluid inside regularly crosslinked, polymer networks with varying mesh sizes. In a polymer network with small mesh sizes, droplet formation can be suppressed, the extent of which is dependent on the attraction strength between the LJ particles. When droplets form in a polymer network with intermediate mesh sizes, subsequent growth is significantly slower when compared with that in bulk without a polymer network. Interestingly, droplet growth beyond the initial nucleation stage occurs by different mechanisms depending on the mesh size: droplets grow mainly by diffusion and coalescence inside polymer networks with large mesh sizes (as observed in bulk), whereas Ostwald ripening becomes a more dominant mechanism for droplet growth for small mesh sizes. The analysis of droplet trajectories clearly reveals the obstruction effect of the polymer network on the movement of growing droplets, which leads to Ostwald ripening of droplets. This study suggests how polymer networks can be used to control the growth of nanoscale droplets.

  11. Detection of bubble nucleation event in superheated drop detector by the pressure sensor

    Indian Academy of Sciences (India)

    MALA DAS; NILANJAN BISWAS

    2017-01-01

    Superheated drop detector consisting of drops of superheated liquid suspended in polymer or gel matrix is of great demand, mainly because of its insensitivity to β-particles and γ -rays and also because of the low cost. The bubble nucleation event is detected by measuring the acoustic shock wave released duringthe nucleation process. The present work demonstrates the detection of bubble nucleation events by using the pressure sensor. The associated circuits for the measurement are described in this article. The detection of events is verified by measuring the events with the acoustic sensor. The measurement was done using drops of various sizes to study the effect of the size of the drop on the pressure recovery time. Probability of detection of events has increased for larger size of the superheated drops and lesser volume of air in contact with the gel matrix. The exponential decay fitting to the pressure sensor signals shows the dead time for pressure recovery of such a drop detector to be a few microseconds.

  12. Superheating Suppresses Structural Disorder in Layered BiI3 Semiconductors Grown by the Bridgman Method

    Energy Technology Data Exchange (ETDEWEB)

    Johns, Paul M.; Sulekar, Soumitra; Yeo, Shinyoung; Baciak, James E.; Bliss, Mary; Nino, Juan C.

    2016-01-01

    The susceptibility of layered structures to stacking faults is a problem in some of the more attractive semiconductor materials for ambient-temperature radiation detectors. In the work presented here, Bridgman-grown BiI3 layered single crystals are investigated to understand and eliminate this structural disorder, which reduces radiation detector performance. The use of superheating gradients has been shown to improve crystal quality in non-layered semiconductor crystals; thus the technique was here explored to improve the growth of BiI3. When investigating the homogeneity of non-superheated crystals, highly geometric void defects were found to populate the bulk of the crystals. Applying a superheating gradient to the melt prior to crystal growth improved structural quality and decreased defect density from the order of 4600 voids per cm3 to 300 voids per cm3. Corresponding moderate improvements to electronic properties also resulted from the superheat gradient method of crystal growth. Comparative measurements through infrared microscopy, etch-pit density, x-ray rocking curves, and sheet resistivity readings show that superheat gradients in BiI3 growth led to higher quality crystals.

  13. Superheating suppresses structural disorder in layered BiI3 semiconductors grown by the Bridgman method

    Science.gov (United States)

    Johns, Paul M.; Sulekar, Soumitra; Yeo, Shinyoung; Baciak, J. E.; Bliss, Mary; Nino, Juan C.

    2016-01-01

    The susceptibility of layered structures to stacking faults is a problem in some of the more attractive semiconductor materials for ambient-temperature radiation detectors. In this work, Bridgman-grown BiI3 layered single crystals are investigated to understand and eliminate structural disorder, which reduces radiation detector performance. The use of superheating gradients has been shown by others to improve crystal quality in non-layered semiconductor crystals (Rudolph et al., 1996) [26]; thus the technique was explored to improve the growth of BiI3. When investigating the homogeneity of non-superheated crystals, highly geometric void defects were found to populate the bulk of the crystals. Applying a superheating gradient to the melt prior to crystal growth improved structural quality and decreased defect density from the order of 4600 voids per cm3 to 300 voids per cm3. Corresponding moderate improvements to electronic properties also resulted from the superheat gradient method of crystal growth. Comparative measurements through infrared microscopy, etch-pit density, X-ray rocking curves, and sheet resistivity readings show that superheat gradients in BiI3 growth led to higher quality crystals.

  14. Detection of bubble nucleation event in superheated drop detector by the pressure sensor

    Science.gov (United States)

    Das, Mala; Biswas, Nilanjan

    2017-01-01

    Superheated drop detector consisting of drops of superheated liquid suspended in polymer or gel matrix is of great demand, mainly because of its insensitivity to ß-particles and ?-rays and also because of the low cost. The bubble nucleation event is detected by measuring the acoustic shock wave released during the nucleation process. The present work demonstrates the detection of bubble nucleation events by using the pressure sensor. The associated circuits for the measurement are described in this article. The detection of events is verified by measuring the events with the acoustic sensor. The measurement was done using drops of various sizes to study the effect of the size of the drop on the pressure recovery time. Probability of detection of events has increased for larger size of the superheated drops and lesser volume of air in contact with the gel matrix. The exponential decay fitting to the pressure sensor signals shows the dead time for pressure recovery of such a drop detector to be a few microseconds.

  15. Dynamics of a Water Droplet over a Sessile Oil Droplet: Compound Droplets Satisfying a Neumann Condition.

    Science.gov (United States)

    Iqbal, R; Dhiman, S; Sen, A K; Shen, Amy Q

    2017-06-13

    We report the dynamics of compound droplets with a denser liquid (water) droplet over a less dense sessile droplet (mineral oil) that satisfies the Neumann condition. For a fixed size of an oil droplet, depending on the size of the water droplet, either it attains the axisymmetric position or tends to migrate toward the edge of the oil droplet. For a water droplet-to-oil droplet at volume ratio Vw/Vo ≥ 0.05, stable axisymmetric configuration is achieved; for Vw/Vo droplet is observed. The stability and migration of water droplets of size above and below critical size, respectively, are explained using the force balance at the three-phase contact line and film tension. The larger and smaller droplets that initially attain the axisymmetric position or some radial position, respectively, evaporate continuously and thus migrate toward the edge of the oil droplet. The radial location and migration of the water droplets of different initial sizes with respect to time are studied. Experiments with water droplets on a flat oil-air interface did not show migration, which signified the role of the curved oil-air interface for droplet migration. Finally, coalescence of water droplets of size above the critical size at the axisymmetric position is demonstrated. Our compound droplet studies could be beneficial for applications involving droplet transport where contamination due to direct contact and pinning of droplets on solid surfaces is of concern. Migration and coalescence of water droplets on curved oil-air interfaces could open new frontiers in chemical and biological applications including multiphase processing and biological interaction of cells and atmospheric chemistry.

  16. Experimental investigation on effects of liquid subcooling on droplet collision heat transfer above Leidenfrost temperature

    Energy Technology Data Exchange (ETDEWEB)

    Park, Junseok; Kim, Hyungdae [Kyung Hee University, Yongin (Korea, Republic of)

    2016-10-15

    In this study, the droplet-wall collision heat transfer experiments above the Leidenfrost point temperature were conducted to experimentally investigate the effects of droplet subcooling. Dynamic behavior of a droplet impinging on the heated wall and the temperature distribution were simultaneously measured using synchronized HSV camera (Phantom v7.3) and infrared camera (FLIR SC6000, 3-5 μm). Heat transfer experiments during collision of a subcooled droplet with a heated surface above the Leidenfrost temperature were conducted by varying temperature of droplet from 40 to 100 °C under the conditions that the collision velocity and wall temperature were maintained constant at 0.7 m/s at 500 °C, respectively. When increasing subcooling of a liquid droplet colliding on a surface heated above Leidenfrost temperature, vapor film thickness decreases while residence time increases. Those effects significantly increase heat transfer amount beyond values predicted by existing correlations.

  17. DNS of turbulent droplet-laden heated channel flow with phase transition at different initial relative humiditiesbh

    NARCIS (Netherlands)

    Bukhvostova, A.; Russo, E.; Kuerten, J.G.M.; Geurts, B.J.

    2014-01-01

    In this paper a turbulent channel flow of a mixture of dry air and water vapor with water droplets is examined. Direct numerical simulation is used to quantify the importance of variations in the initial relative humidity. We focus on the droplet behavior along with the thermal properties of the sys

  18. Microfluidic devices for droplet injection

    Science.gov (United States)

    Aubrecht, Donald; Akartuna, Ilke; Weitz, David

    2012-02-01

    As picoliter-scale reaction vessels, microfluidic water-in-oil emulsions have found application for high-throughput, large-sample number analyses. Often, the biological or chemical system under investigation needs to be encapsulated into droplets to prevent cross contamination prior to the introduction of reaction reagents. Previous techniques of picoinjection or droplet synchronization and merging enable the addition of reagents to individual droplets, but present limitations on what can be added to each droplet. We present microfluidic devices that couple the strengths of picoinjection and droplet merging, allowing us to selectively add precise volume to our droplet reactions.

  19. Evaporation of Liquid Droplet in Nano and Micro Scales from Statistical Rate Theory.

    Science.gov (United States)

    Duan, Fei; He, Bin; Wei, Tao

    2015-04-01

    The statistical rate theory (SRT) is applied to predict the average evaporation flux of liquid droplet after the approach is validated in the sessile droplet experiments of the water and heavy water. The steady-state experiments show a temperature discontinuity at the evaporating interface. The average evaporation flux is evaluated by individually changing the measurement at a liquid-vapor interface, including the interfacial liquid temperature, the interfacial vapor temperature, the vapor-phase pressure, and the droplet size. The parameter study shows that a higher temperature jump would reduce the average evaporation flux. The average evaporation flux can significantly be influenced by the interfacial liquid temperature and the vapor-phase pressure. The variation can switch the evaporation into condensation. The evaporation flux is found to remain relative constant if the droplet is larger than a micro scale, while the smaller diameters in nano scale can produce a much higher evaporation flux. In addition, a smaller diameter of droplets with the same liquid volume has a larger surface area. It is suggested that the evaporation rate increases dramatically as the droplet shrinks into nano size.

  20. Spline Based Shape Prediction and Analysis of Uniformly Rotating Sessile and Pendant Droplets.

    Science.gov (United States)

    Jakhar, Karan; Chattopadhyay, Ashesh; Thakur, Atul; Raj, Rishi

    2017-06-06

    Prediction and analysis of the shapes of liquid-vapor interface of droplets under the influence of external forces is critical for various applications. In this regard, a geometric model that can capture the macroscopic shape of the liquid-vapor interface in tandem with the subtleties near the contact line, particularly in the regime where the droplet shape deviates significantly from the idealized spherical cap geometry, is desirable. Such deviations may occur when external forces such as gravity or centrifugal dominate over the surface tension force. Here we use vector parametrized cubic spline representation for axisymmetric fluid-fluid interfaces along with a novel thermodynamic free energy minimization based heuristic to determine the shape of liquid-vapor interface of droplets. We show that the current scheme can easily predict the shapes of sessile and pendant droplets under the action of centrifugal force over a broad range of surface contact angle values and droplet sizes encountered in practical applications. Finally, we show that the cubic spline based modeling approach makes it convenient to perform the inverse analysis as well, i.e., predict interfacial properties from the shape of a droplet under the action of various types of external forces including gravity and centrifugal. We believe that this versatile modeling approach can be extended to model droplet shapes under various other external forces including electric and acoustic. In addition, the simple shape analysis approach is also promising for the development of inexpensive interfacial analysis tools such as surface tensiometers.

  1. Sharp Interface Level Set Method based Study for Evaporation of a Sessile Droplet on Hydrophilic and Hydrophobic Substrates

    Science.gov (United States)

    Shaikh, Javed; Sharma, Atul; Bhardwaj, Rajneesh

    2016-11-01

    The evaporation of a sessile droplet is important in many applications like hot-spot cooling, surface patterning etc. An understanding of the droplet dynamics in terms of evaporation rate, evaporative cooling and substrate wettability is important for designing the droplet based devices. Extensive theoretical and experimental research has been conducted on evaporating droplets in recent years; however, the effect of surrounding vapors on the evaporation dynamics of a sessile droplet is not found in the literature. In this work, an in-house sharp-interface level set code based on the Ghost Fluid Method (GFM) is used. Energy, species, and momentum equations are coupled for studying the sessile droplet evaporation phenomenon on hydrophilic and hydrophobic substrates. Different modes of droplet evaporation i.e. constant contact radius (CCR), constant contact angle (CCA) are observed for the two types of substrates. The coupling of energy and species equations is used for capturing the evaporating cooling induced dip in the droplet surface temperature. The effect of surrounding vapors like fluorocarbon vapors, on the evaporative cooling, is presented for water droplet on the hydrophilic and hydrophobic substrates. Research Scholar.

  2. Explosion of Leidenfrost Droplets

    Science.gov (United States)

    Moreau, Florian; Colinet, Pierre; Dorbolo, Stephane

    2012-11-01

    When a drop is released on a plate heated above a given temperature, a thin layer of vapour can isolate the droplet so that it levitates over the plate. This effect was first reported by Leidenfrost in 1756. However, this fascinating subject remains an active field of research in both fundamental and applied researches. In this work, we focus on what happens when surfactant is added to the drop. The aim is to study the influence of a decrease of the surface tension. Surprisingly, as the droplet evaporates, suddenly it explodes. The evolution of the droplet and the resulting explosion are followed using a high speed camera. We show that when a critical concentration of surfactant is reached inside the drop, a shell of surfactant is formed leading to the explosion. The authors would like to thank FNRS for financial support. This work is financially supported by ODILE project (Contract No. FRFC 2.4623.11).

  3. Vitrification and levitation of a liquid droplet on liquid nitrogen

    Science.gov (United States)

    Song, Young S.; Adler, Douglas; Xu, Feng; Kayaalp, Emre; Nureddin, Aida; Anchan, Raymond M.; Maas, Richard L.; Demirci, Utkan

    2010-01-01

    The vitrification of a liquid occurs when ice crystal formation is prevented in the cryogenic environment through ultrarapid cooling. In general, vitrification entails a large temperature difference between the liquid and its surrounding medium. In our droplet vitrification experiments, we observed that such vitrification events are accompanied by a Leidenfrost phenomenon, which impedes the heat transfer to cool the liquid, when the liquid droplet comes into direct contact with liquid nitrogen. This is distinct from the more generally observed Leidenfrost phenomenon that occurs when a liquid droplet is self-vaporized on a hot plate. In the case of rapid cooling, the phase transition from liquid to vitrified solid (i.e., vitrification) and the levitation of droplets on liquid nitrogen (i.e., Leidenfrost phenomenon) take place simultaneously. Here, we investigate these two simultaneous physical events by using a theoretical model containing three dimensionless parameters (i.e., Stefan, Biot, and Fourier numbers). We explain theoretically and observe experimentally a threshold droplet radius during the vitrification of a cryoprotectant droplet in the presence of the Leidenfrost effect. PMID:20176969

  4. High pressure droplet burning experiments in reduced gravity

    Science.gov (United States)

    Chauveau, Christian; Goekalp, Iskender

    1995-01-01

    A parametric investigation of single droplet gasification regimes is helpful in providing the necessary physical ideas for sub-grid models used in spray combustion numerical prediction codes. A research program has been initiated at the LCSR to explore the vaporization regimes of single and interacting hydrocarbon and liquid oxygen droplets under high pressure conditions. This paper summarizes the status of the LCSR program on the high pressure burning of single fuel droplets; recent results obtained under normal and reduced gravity conditions with suspended droplets are presented. In the work described here, parabolic flights of the CNES Caravelle is used to create a reduced gravity environment of the order of 10(exp -2) g(sub O). For all the droplet burning experiments reported here, the suspended droplet initial diameters are scattered around 1.5 mm; and the ambient air temperature is 300 K. The ambient pressure is varied between 0.1 MPa and 12 MPa. Four fuels are investigated: methanol (Pc = 7.9 MPa), n-heptane (Pc = 2.74 MPa), n-hexane (Pc = 3.01 MPa) and n-octane (Pc = 2.48 MPa).

  5. The liquid to vapor phase transition in excited nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, J.B.; Moretto, L.G.; Phair, L.; Wozniak, G.J.; Beaulieu, L.; Breuer, H.; Korteling, R.G.; Kwiatkowski, K.; Lefort, T.; Pienkowski, L.; Ruangma, A.; Viola, V.E.; Yennello, S.J.

    2001-05-08

    For many years it has been speculated that excited nuclei would undergo a liquid to vapor phase transition. For even longer, it has been known that clusterization in a vapor carries direct information on the liquid-vapor equilibrium according to Fisher's droplet model. Now the thermal component of the 8 GeV/c pion + 197 Au multifragmentation data of the ISiS Collaboration is shown to follow the scaling predicted by Fisher's model, thus providing the strongest evidence yet of the liquid to vapor phase transition.

  6. The liquid to vapor phase transition in excited nuclei

    CERN Document Server

    Elliott, J B; Phair, L; Wozniak, G J; Lefort, T; Beaulieu, L; Kwiatkowski, K K; Hsi, W C; Pienkowski, L; Breuer, H; Korteling, R G; Laforest, R; Martin, E; Ramakrishnan, E; Rowland, D; Ruangma, A; Viola, V E; Winchester, E M; Yennello, S J

    2002-01-01

    For many years it has been speculated that excited nuclei would undergo a liquid to vapor phase transition. For even longer, it has been known that clusterization in a vapor carries direct information on the liquid- vapor equilibrium according to Fisher's droplet model. Now the thermal component of the 8 GeV/c pion + 197Au multifragmentation data of the ISiS Collaboration is shown to follow the scaling predicted by Fisher's model, thus providing the strongest evidence yet of the liquid to vapor phase transition.

  7. Cloud droplet activation: solubility revisited

    Directory of Open Access Journals (Sweden)

    L. T. Padró

    2007-02-01

    Full Text Available Soluble compounds present in atmospheric aerosol facilitate their transformation into cloud droplets by depressing the equilibrium vapor pressure required for activation. Their impact depends on the amount of dissolved substance in the aerosol aqueous phase, which in turn is controlled by its solubility. This study explores the impact of particle curvature on solubility, expressed in terms of a Kelvin enhancement. The augmented solubility, termed "Curvature Enhanced Solubility" (CES, is then introduced into Köhler theory for assessment of its impact on CCN activity for several organic compounds with a wide range of aqueous solubility. The interfacial energy between solute and aqueous phase required for quantification of CES is determined from existing correlations based on bulk solubility, and concurrent measurements of contact angle and surface tension. A number of important findings arise from this study: i CES can substantially increase solubility and impact CCN activity but only if the aerosol is initially wet, ii CES can stabilize highly supersaturated solutions, and provide a mechanism for retention of an aerosol aqueous phase even at very low relative humidity (RH, and, iii trace amounts of surfactant impurities can magnify the impact of CES.

  8. Digital holographic measurement of the Lagrangian evaporation rate of droplets dispersing in a homogeneous isotropic turbulence

    Science.gov (United States)

    Marié, J. L.; Tronchin, T.; Grosjean, N.; Méès, L.; Öztürk, O. Can; Fournier, C.; Barbier, B.; Lance, M.

    2017-02-01

    The evaporation rate of diethyl ether droplets dispersing in a homogeneous, nearly isotropic turbulence is measured by following droplets along their trajectory. Measurements are performed at ambient temperature and pressure by using in-line digital holography. The holograms of droplets are recorded with a single high-speed camera (3 kHz), and droplets trajectories are reconstructed with an "inverse problem approach" (IPA) algorithm previously used in Chareyron et al. (New J Phys 14:043039, 2012) and Marié et al. (Exp Fluid 55(4):1708, 2014. doi: 10.1007/s00348-014-1708-6). The thermal/vapor concentration wakes developing around the droplets are visible behind each hologram. A standard reconstruction process is applied, showing that these wakes are aligned with the relative Lagrangian velocity seen by droplets at each instant. This relative velocity is that obtained from the dynamic equation of droplets motion and the positions and diameter of the droplets measured by holography and the IPA reconstruction. Sequences of time evolution of droplets 3D positions, diameter and 3D relative velocity are presented. In a number of cases, the evaporation rate of droplets changes along the trajectory and deviates from the value estimated with a standard film model of evaporation. This shows that turbulence may significantly influence the phase change process.

  9. Chip-based droplet sorting

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald; Lee, Abraham; Hatch, Andrew

    2014-07-01

    A non-contact system for sorting monodisperse water-in-oil emulsion droplets in a microfluidic device based on the droplet's contents and their interaction with an applied electromagnetic field or by identification and sorting.

  10. Chip-based droplet sorting

    Science.gov (United States)

    Beer, Neil Reginald; Lee, Abraham; Hatch, Andrew

    2014-07-01

    A non-contact system for sorting monodisperse water-in-oil emulsion droplets in a microfluidic device based on the droplet's contents and their interaction with an applied electromagnetic field or by identification and sorting.

  11. Enhancing Throughput of Combinatorial Droplet Devices via Droplet Bifurcation, Parallelized Droplet Fusion, and Parallelized Detection

    Directory of Open Access Journals (Sweden)

    Kuangwen Hsieh

    2015-10-01

    Full Text Available Combinatorial droplet microfluidic devices with programmable microfluidic valves have recently emerged as a viable approach for performing multiplexed experiments in microfluidic droplets. However, the serial operation in these devices restricts their throughput. To address this limitation, we present a parallelized combinatorial droplet device that enhances device throughput via droplet bifurcation, parallelized droplet fusion, and parallelized droplet detection. In this device, sample droplets split evenly at bifurcating Y-junctions before multiple independent reagent droplets are injected directly into the split sample droplets for robust droplet fusion. Finally, the fused sample and reagent droplets can be imaged in parallel via microscopy. The combination of these approaches enabled us to improve the throughput over traditional, serially-operated combinatorial droplet devices by 16-fold—with ready potential for further enhancement. Given its current performance and prospect for future improvements, we believe the parallelized combinatorial droplet device has the potential to meet the demand as a flexible and cost-effective tool that can perform high throughput screening applications.

  12. Hydrodynamics of a quark droplet

    DEFF Research Database (Denmark)

    Bjerrum-Bohr, Johan J.; Mishustin, Igor N.; Døssing, Thomas

    2012-01-01

    We present a simple model of a multi-quark droplet evolution based on the hydrodynamical description. This model includes collective expansion of the droplet, effects of the vacuum pressure and surface tension. The hadron emission from the droplet is described following Weisskopf's statistical...

  13. Impact of blood droplets

    NARCIS (Netherlands)

    N. Laan

    2015-01-01

    Within Bloodstain Pattern Analysis, forensic experts commonly use the stringing method, based on a straight line approximation of the blood droplets trajectories to determine where the source of a bloodstain pattern was. However, by ignoring gravity, large errors may arise when inferring the 3D-loca

  14. Sessile nanofluid droplet drying.

    Science.gov (United States)

    Zhong, Xin; Crivoi, Alexandru; Duan, Fei

    2015-03-01

    Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier-Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.

  15. Method And Apparatus For Atomizing And Vaporizing Liquid

    KAUST Repository

    Lal, Amit

    2014-09-18

    A method and apparatus for atomizing and vaporizing liquid is described. An apparatus having an ejector configured to eject one or more droplets of liquid may be inserted into a reservoir containing liquid. The ejector may have a vibrating device that vibrates the ejector and causes liquid to move from the reservoir up through the ejector and out through an orifice located on the top of the ejector. The one or more droplets of liquid ejected from the ejector may be heated and vaporized into the air.

  16. Droplet creator based on electrowetting-on-dielectric for lab on a chip

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Electrowetting-on-dielectric (EWOD) is to directly control the wettability of liquids on the solid surface by applying the electric potential to the microelectrode array under the dielectric layer. The prototype of the EWOD droplet creator with the sandwiched structure is used: the droplet is sandwiched between the top and bottom plates; the bottom plate consists of silicon used as the substrate of the microelectrode array, nitride silicon film deposited by low pressure chemical vapor deposition as the dielectric layer and the fluorocarbon polymer film deposited by inductively coupled plasma chemical vapor deposition as the hydrophobic layer; and the top plate is the transparent electrode covered with the hydrophobic layer. To obtain the required minimum voltage, the process and the criterion of creating droplets are analyzed. At the voltage of 35 V the deionized water droplet surrounded in silicone oil is successfully created.

  17. Improvement of the phase transition homogeneity of superheated superconducting tin granules

    CERN Document Server

    Calatroni, Sergio; Czapek, G; Ebert, T R; Hasenbalg, F; Hauser, M G; Janos, S; Kainer, K U; Knoop, K M; Moser, U; Palmieri, V G; Pretzl, Klaus P; Sahli, B; Sgobba, Stefano; Vollenberg, W; Wyss, C

    2000-01-01

    A considerably improved phase transition homogeneity was observed with superheated superconducting Sn spheres as a result of laser melting and fast cooling. These spheres exhibited a very homogeneous phase transition behaviour independent of the orientation of the spheres with respect to the direction of the external magnetic field. Compared to previously untreated Sn spheres the spread of the phase transition boundaries was reduced by almost an order of magnitude. In addition, we studied mass production of Sn structures using vacuum evaporation and deposition. First encouraging results are reported. (7 refs).

  18. Superheating and Homogeneous Single Bubble Nucleation in a Solid-State Nanopore

    Science.gov (United States)

    Nagashima, Gaku; Levine, Edlyn V.; Hoogerheide, David P.; Burns, Michael M.; Golovchenko, Jene A.

    2014-01-01

    We demonstrate extreme superheating and single bubble nucleation in an electrolyte solution within a nanopore in a thin silicon nitride membrane. The high temperatures are achieved by Joule heating from a highly focused ionic current induced to flow through the pore by modest voltage biases. Conductance, nucleation, and bubble evolution are monitored electronically and optically. Temperatures near the thermodynamic limit of superheat are achieved just before bubble nucleation with the system at atmospheric pressure. Bubble nucleation is homogeneous and highly reproducible. This nanopore approach more generally suggests broad application to the excitation, detection, and characterization of highly metastable states of matter. PMID:25062192

  19. Improvement of the phase transition homogeneity of superheated superconducting tin granules

    Energy Technology Data Exchange (ETDEWEB)

    Calatroni, S.; Casalbuoni, S. E-mail: sara@lhc.lhep.unibe.ch; Czapek, G.; Ebert, T.; Hasenbalg, F.; Hauser, M.; Janos, S.; Kainer, K.U.; Knoop, K.M.; Moser, U.; Palmieri, V.G.; Pretzl, K.; Sahli, B.; Sgobba, S.; Vollenberg, W.; Wyss, Ch.P

    2000-04-07

    A considerably improved phase transition homogeneity was observed with superheated superconducting Sn spheres as a result of laser melting and fast cooling. These spheres exhibited a very homogeneous phase transition behaviour independent of the orientation of the spheres with respect to the direction of the external magnetic field. Compared to previously untreated Sn spheres the spread of the phase transition boundaries was reduced by almost an order of magnitude. In addition, we studied mass production of Sn structures using vacuum evaporation and deposition. First encouraging results are reported.

  20. Extraction of amino acids from soils and sediments with superheated water

    Science.gov (United States)

    Cheng, C. N.; Ponnamperuma, C.

    1974-01-01

    A method of extraction for amino acids from soils and sediments involving superheated water has been investigated. About 75-97 per cent of the amino acids contained in four soils of a soil profile from Illinois were extracted by this method. Deep penetration of water into soil aggregates and partial hydrolysis of peptide bonds during this extraction by water at high temperature are likely mechanisms responsible for the release of amino acids from samples. This extraction method does not require subsequent desalting treatments when analyses are carried out with an ion-exchange amino acid analyzer.

  1. Stability of thin liquid films and sessile droplets under confinement.

    Science.gov (United States)

    Dörfler, Fabian; Rauscher, Markus; Dietrich, S

    2013-07-01

    The stability of nonvolatile thin liquid films and of sessile droplets is strongly affected by finite size effects. We analyze their stability within the framework of density functional theory using the sharp kink approximation, i.e., on the basis of an effective interface Hamiltonian. We show that finite size effects suppress spinodal dewetting of films because it is driven by a long-wavelength instability. Therefore nonvolatile films are stable if the substrate area is too small. Similarly, nonvolatile droplets connected to a wetting film become unstable if the substrate area is too large. This instability of a nonvolatile sessile droplet turns out to be equivalent to the instability of a volatile drop which can attain chemical equilibrium with its vapor.

  2. Parameterization of cloud droplet formation for global and regional models: including adsorption activation from insoluble CCN

    OpenAIRE

    Kumar, P.; I. N. Sokolik; Nenes, A.

    2009-01-01

    Dust and black carbon aerosol have long been known to exert potentially important and diverse impacts on cloud droplet formation. Most studies to date focus on the soluble fraction of these particles, and overlook interactions of the insoluble fraction with water vapor (even if known to be hydrophilic). To address this gap, we developed a new parameterization that considers cloud droplet formation within an ascending air parcel containing insoluble (but wettable) particles externally mixed wi...

  3. Buckling instability of squeezed droplets

    CERN Document Server

    Elfring, Gwynn J

    2015-01-01

    Motivated by recent experiments, we consider theoretically the compression of droplets pinned at the bottom on a surface of finite area. We show that if the droplet is sufficiently compressed at the top by a surface, it will always develop a shape instability at a critical compression. When the top surface is flat, the shape instability occurs precisely when the apparent contact angle of the droplet at the pinned surface is pi, regardless of the contact angle of the upper surface, reminiscent of past work on liquid bridges and sessile droplets as first observed by Plateau. After the critical compression, the droplet transitions from a symmetric to an asymmetric shape. The force required to deform the droplet peaks at the critical point then progressively decreases indicative of catastrophic buckling. We characterize the transition in droplet shape using illustrative examples in two dimensions followed by perturbative analysis as well as numerical simulation in three dimensions. When the upper surface is not f...

  4. Evaporation kinetics of sessile water droplets on micropillared superhydrophobic surfaces.

    Science.gov (United States)

    Xu, Wei; Leeladhar, Rajesh; Kang, Yong Tae; Choi, Chang-Hwan

    2013-05-21

    Evaporation modes and kinetics of sessile droplets of water on micropillared superhydrophobic surfaces are experimentally investigated. The results show that a constant contact radius (CCR) mode and a constant contact angle (CCA) mode are two dominating evaporation modes during droplet evaporation on the superhydrophobic surfaces. With the decrease in the solid fraction of the superhydrophobic surfaces, the duration of a CCR mode is reduced and that of a CCA mode is increased. Compared to Rowan's kinetic model, which is based on the vapor diffusion across the droplet boundary, the change in a contact angle in a CCR (pinned) mode shows a remarkable deviation, decreasing at a slower rate on the superhydrophobic surfaces with less-solid fractions. In a CCA (receding) mode, the change in a contact radius agrees well with the theoretical expectation, and the receding speed is slower on the superhydrophobic surfaces with lower solid fractions. The discrepancy between experimental results and Rowan's model is attributed to the initial large contact angle of a droplet on superhydrophobic surfaces. The droplet geometry with a large contact angle results in a narrow wedge region of air along the contact boundary, where the liquid-vapor diffusion is significantly restricted. Such an effect becomes minor as the evaporation proceeds with the decrease in a contact angle. In both the CCR and CCA modes, the evaporative mass transfer shows the linear relationship between mass(2/3) and evaporation time. However, the evaporation rate is slower on the superhydrophobic surfaces, which is more significant on the surfaces with lower solid fractions. As a result, the superhydrophobic surfaces slow down the drying process of a sessile droplet on them.

  5. Explosive Breakup of a Water Droplet with a Nontransparent Solid Inclusion Heated in a High-Temperature Gaseous Medium

    Directory of Open Access Journals (Sweden)

    Dmitrienko Margarita A.

    2015-01-01

    Full Text Available This paper investigates the evaporation of a water droplet with a comparably sized solid nontransparent inclusion in a high-temperature (500–800 K gas medium. Water evaporates from the free surface of the inclusion. During this process, intensive vapor formation occurs on the inner interface “water droplet – solid inclusion” with the subsequent explosive decay of the droplet. Experiments have been conducted using high-speed (up to 105 fps video cameras “Phantom” and software “Phantom Camera Control”. The conditions of the explosive vapor formation of the heterogeneous water droplet were found. The typical phase change mechanisms of the heterogeneous water droplet under the conditions of intensive heat exchange were determined.

  6. Confinement-induced alterations in the evaporation dynamics of sessile droplets.

    Science.gov (United States)

    Bansal, Lalit; Chakraborty, Suman; Basu, Saptarshi

    2017-02-07

    Evaporation of sessile droplets has been a topic of extensive research. However, the effect of confinement on the underlying dynamics has not been well explored. Here, we report the evaporation dynamics of a sessile droplet in a confined fluidic environment. Our findings reveal that an increase in the channel length delays the completion of the evaporation process and leads to unique spatio-temporal evaporation flux and internal flow. The evaporation modes (constant contact angle and constant contact radius) during the droplet lifetime however exhibit global similarity when normalized by appropriate length and timescales. These results are explained in light of an increase in vapor concentration inside the channel due to greater accumulation of water vapor on account of increased channel length. We have formulated a theoretical framework which introduces two key parameters namely an enhanced concentration of the vapor field in the vicinity of the confined droplet and a corresponding accumulation lengthscale over which the accumulated vapor relaxes to the ambient concentration. Using these two parameters and modified diffusion based evaporation we are able to show that confined droplets exhibit a universal behavior in terms of the temporal evolution of each evaporation mode irrespective of the channel length. These results may turn out to be of profound importance in a wide variety of applications, ranging from surface patterning to microfluidic technology.

  7. Three-dimensional simulation of impingement of a liquid droplet on a flat surface in the Leidenfrost regime

    Science.gov (United States)

    Ge, Yang; Fan, L.-S.

    2005-02-01

    The hydrodynamics and heat transfer phenomena of a liquid droplet impacting upon a hot flat surface are analyzed based on three-dimensional (3D) numerical simulation considering film-boiling behavior. The 3D level-set method is employed to portray the droplet surface variation during its deformation. The governing equations for the droplet and the surrounding gas phase are solved utilizing the finite-volume method with the arbitrary Lagrangian Eulerian technique. To account for the lubrication resistant effects of the vapor cushion formed by the film-boiling evaporation, a separate vapor flow model is developed to simulate the pressure and velocity distribution along the vapor layer between the droplet and the surface. The temperature fields in all phases and the local evaporation rate on the droplet surface are determined by using a full field heat transfer model. Both the water and n-heptane droplets impacting on the solid wall with different Weber numbers are investigated. The comparisons of the simulation results with the experimental results reported in the literatures are made to substantiate the model presented in this study. Specially, the spreading and recoiling motions of the impacting droplets are reproduced accurately for a wide range of the Weber number. The oscillation of the thickness of the vapor layer and the temperature distribution across the interface are also calculated and compared favorably with the experimental results. As the Weber number increases, the extent of the droplet spreading increases, but the residence time of the droplet on the surface is almost unchanged. Compared to the saturated impacts, the subcooled impact yields a thinner vapor layer and a higher heat transfer rate.

  8. Numerical Investigation of the Water Droplet Transport in a PEM Fuel Cell with Serpentine Flow Channel

    Directory of Open Access Journals (Sweden)

    Bittagopal Mondal

    2016-01-01

    Full Text Available The serpentine flow channel can be considered as one of the most common and practical channel layouts for a polymer electrolyte membrane fuel cell (PEMFC since it ensures an effective and efficient removal of water produced in a cell with acceptable parasitic load. Water management is one of the key issues to improve the cell performance since at low operating temperatures in PEMFC, water vapor condensation starts easily and accumulates the liquid water droplet within the flow channels, thus affecting the chemical reactions and reducing the fuel cell performance. In this article, a comprehensive three dimensional numerical simulation is carried out to understand the water droplet mobility in a serpentine gas flow channel for a wide range of surface properties, inlet air velocities, droplet positions (center or off-center, bottom or top and droplet sizes by deploying a finite volume based methodology. The liquid-gas interface is tracked following the volume-of-fluid (VOF method. The droplet transport is found to be greatly influenced by the surface wettability properties, inlet velocities, number of droplets emerged and initial droplet positions. Super hydrophobic surface property is not always preferable for designing the gas flow channels. It depends upon the inlet velocity conditions, droplet positions, number of droplets and surface properties.

  9. Droplets and sprays

    CERN Document Server

    Sazhin, Sergei

    2014-01-01

    Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models, and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Includes case studies that illustrate the approaches relevance to automotive applications,  it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.

  10. Effect of Superheated Steam Treatment on Changes in Moisture Content and Colour Properties of Coconut Slices

    Directory of Open Access Journals (Sweden)

    Mah Sook Yun

    2015-03-01

    Full Text Available Drying is one of the methods to preserve the quality and prolong the shelf life of food. Coconut meat was sliced and dried using superheated steam oven at 140°C, 160°C and 180°C. Drying was carried out at different drying time (5, 10, 15, 20, 25 and 30 minutes. The effect of drying temperature and time on the moisture content and colour properties (L, a, b and BI of the coconut slices were studied. The temperature and time significantly (p < 0.05 affected the moisture loss and colour values of coconut slices during superheated steam drying. The moisture content decreased with increased drying temperature and time. The values of L decreased with drying temperature and time. The a and b value of coconut slice dried at 140°C decreased initially then increased with time. Coconut slices dried at 160°C had their a values increased up to 20 minutes then decreased and b values increased up to 20 minutes then fluctuated. The a and b values of coconut slices dried at 180°C showed fluctuation. BI values of coconut slices increased with increasing drying time and temperature.

  11. Effect of Superheated Steam Roasting on Radical Scavenging Activity and Phenolic Content of Robusta Coffee Beans

    Directory of Open Access Journals (Sweden)

    Ooi Ee Shan

    2015-04-01

    Full Text Available Robusta coffee is one of the coffee species grown in Malaysia. However, there is little research conducted on Robusta coffee beans as Arabica coffee is more popular among the consumers. Coffee is a rich source of antioxidants, therefore research on antioxidant properties of Robusta coffee beans is important to explore its market value. Nowadays, most of coffee analysis is on conventional roasted coffee which reduces their antioxidant properties. In this study, Robusta coffee beans (Coffea canephora were subjected to superheated steam roasting at 200, 220 and 240 ˚C for 20-40 min to obtain light, medium and dark roast. The effect of different roasting temperature and time on the total phenolic content (TPC and radical scavenging activity (RSA of Robusta coffee bean was investigated. Total phenolic content of coffee brews decreased with the increase of roasting degree due to the degradation of phenolic compounds. The highest phenolic content was found at 220 ˚C for 20 min. Meanwhile, brews extracted from light roasted coffee and medium roasted at 220 ˚C for 20 min showed a maximum scavenging activity than those from green coffee. Brews from dark roasted coffee showed lowest radical scavenging activity and total phenol content. Hence, based on the results from this study, the best superheated steam roasting condition is at 220 ˚C for 20 min (medium roast to achieve a maximum antioxidant activity and highest phenolic content.

  12. Investigation of effects of chemical dosing on fuel consumption in central heating systems with superheated water

    Energy Technology Data Exchange (ETDEWEB)

    Bilen, Kemal [Kirikkale University, Engineering Faculty, Mechanical Engineering Department, Kirikkale (Turkey); email: kemal.bilen92@gmail.com

    2011-07-01

    In Turkey, a significant percentage of energy is consumed by buildings and heating accounts for most of it. These is therefore a need to increase the efficiency of such systems. As a regional heating option, central heating systems with superheated water are preferred and chemical dosing of these systems has become prevalent in recent years. This study analyses the energy and exergy of a superheated water, central heating system operated on natural gas, on a university campus with a population of 15000 people, and investigates the effect of chemical dosing on their efficiencies. The study results showed that the average energy and exergy efficiencies of the system were 92.07% and 62.45%, respectively. The results also demonstrated that there was a 5.21% and 2.74% increase in hourly gas consumption when the dosing concentration was changed from 5 ppm to 101 ppm and 50 ppm to 101 ppm, respectively. It was concluded that for lower fuel consumption, chemical dosing should be avoided.

  13. Hovering UFO Droplets

    CERN Document Server

    Anand, Sushant; Dhiman, Rajeev; Smith, J David; Varanasi, Kripa K

    2012-01-01

    This fluid dynamics video is an entry for the Gallery of Fluid Motion of the 65th Annual Meeting of the APS-DFD. This video shows behavior of condensing droplets on a lubricant impregnated surface and a comparison with a superhydrophobic surface. On impregnated surfaces, drops appear like UFOs hovering over a surface. The videos were recorded in an Environmental SEM and a specially built condensation rig.

  14. Evaporating droplet hologram simulation for digital in-line holography setup with divergent beam.

    Science.gov (United States)

    Méès, Loïc; Grosjean, Nathalie; Chareyron, Delphine; Marié, Jean-Louis; Seifi, Mozhdeh; Fournier, Corinne

    2013-10-01

    Generalized Lorenz-Mie theory (GLMT) for a multilayered sphere is used to simulate holograms produced by evaporating spherical droplets with refractive index gradient in the surrounding air/vapor mixture. Simulated holograms provide a physical interpretation of experimental holograms produced by evaporating Diethyl Ether droplets with diameter in the order of 50 μm and recorded in a digital in-line holography configuration with a divergent beam. Refractive index gradients in the surrounding medium lead to a modification of the center part of the droplet holograms, where the first fringe is unusually bright. GLMT simulations reproduce this modification well, assuming an exponential decay of the refractive index from the droplet surface to infinity. The diverging beam effect is also considered. In both evaporating and nonevaporating cases, an equivalence is found between Gaussian beam and plane wave illuminations, simply based on a magnification ratio to be applied to the droplets' parameters.

  15. Configurational forces and shape of a sessile droplet on a rotating solid substrate

    Directory of Open Access Journals (Sweden)

    Lubarda Vlado A.

    2012-01-01

    Full Text Available The shape of a uniformly rotating liquid droplet deposited on a solid substrate is determined by an iterative numerical integration of the governing nonlinear differential equation. The differential equation and the boundary conditions are derived by means of the variational analysis which delivers the expressions for the specific configurational force per unit area of the liquid/vapor interface, and the configurational force along the liquid/solid/vapor contact circle. An analytical proof for the orthogonality of the specific configurational force to the surface of the droplet is constructed. The effect of rotation on the droplet’s gyrostatic shape is discussed.

  16. Assessment of water droplet evaporation mechanisms on hydrophobic and superhydrophobic substrates.

    Science.gov (United States)

    Pan, Zhenhai; Dash, Susmita; Weibel, Justin A; Garimella, Suresh V

    2013-12-23

    Evaporation rates are predicted and important transport mechanisms identified for evaporation of water droplets on hydrophobic (contact angle ~110°) and superhydrophobic (contact angle ~160°) substrates. Analytical models for droplet evaporation in the literature are usually simplified to include only vapor diffusion in the gas domain, and the system is assumed to be isothermal. In the comprehensive model developed in this study, evaporative cooling of the interface is accounted for, and vapor concentration is coupled to local temperature at the interface. Conjugate heat and mass transfer are solved in the solid substrate, liquid droplet, and surrounding gas. Buoyancy-driven convective flows in the droplet and vapor domains are also simulated. The influences of evaporative cooling and convection on the evaporation characteristics are determined quantitatively. The liquid-vapor interface temperature drop induced by evaporative cooling suppresses evaporation, while gas-phase natural convection acts to enhance evaporation. While the effects of these competing transport mechanisms are observed to counterbalance for evaporation on a hydrophobic surface, the stronger influence of evaporative cooling on a superhydrophobic surface accounts for an overprediction of experimental evaporation rates by ~20% with vapor diffusion-based models. The local evaporation fluxes along the liquid-vapor interface for both hydrophobic and superhydrophobic substrates are investigated. The highest local evaporation flux occurs at the three-phase contact line region due to proximity to the higher temperature substrate, rather than at the relatively colder droplet top; vapor diffusion-based models predict the opposite. The numerically calculated evaporation rates agree with experimental results to within 2% for superhydrophobic substrates and 3% for hydrophobic substrates. The large deviations between past analytical models and the experimental data are therefore reconciled with the

  17. Dueling Mechanisms for Dry Zones around Frozen Droplets

    Science.gov (United States)

    Bisbano, Caitlin; Nath, Saurabh; Boreyko, Jonathan

    2016-11-01

    Ice acts as a local humidity sink, due to its depressed saturation pressure relative to that of supercooled water. Hygroscopic chemicals typically exhibit annular dry zones of inhibited condensation; however, dry zones do not tend to form around ice because of inter-droplet frost growth to nearby liquid droplets that have already condensed on the chilled surface. Here, we use a humidity chamber with an embedded Peltier stage to initially suppress the growth of condensation on a chilled surface containing a single frozen droplet, in order to characterize the dry zone around ice for the first time. The length of the dry zone was observed to vary by at least two orders of magnitude as a function of surface temperature, ambient humidity, and the size of the frozen droplet. The surface temperature and ambient humidity govern the magnitudes of the in-plane and out-of-plane gradients in vapor pressure, while the size of the frozen droplet effects the local thickness of the concentration boundary layer. We develop an analytical model that reveals two different types of dry zones are possible: one in which nucleation is inhibited and one where the net growth of condensate is inhibited. Finally, a phase map was developed to predict the parameter space in which nucleation dry zones versus flux dry zones are dominant.

  18. Sagging of evaporating droplets of colloidal suspensions on inclined substrates.

    Science.gov (United States)

    Espín, Leonardo; Kumar, Satish

    2014-10-14

    A droplet of a colloidal suspension placed on an inclined substrate may sag under the action of gravity. Solvent evaporation raises the concentration of the colloidal particles, and the resulting viscosity changes may influence the sag of the droplet. To investigate this phenomenon, we have developed a mathematical model for perfectly wetting droplets based on lubrication theory and the rapid-vertical-diffusion approximation. Precursor films are assumed to be present, the colloidal particles are taken to be hard spheres, and particle and liquid dynamics are coupled through a concentration-dependent viscosity and diffusivity. Evaporation is assumed to be limited by how rapidly solvent molecules can transfer from the liquid to the vapor phase. The resulting one-dimensional system of nonlinear partial differential equations describing the evolution of the droplet height and particle concentration is solved numerically for a range of initial particle concentrations and substrate temperatures. The solutions reveal that the interaction between evaporation and non-Newtonian suspension rheology gives rise to several distinct regimes of droplet shapes and particle concentration distributions. The results provide insight into how evaporation and suspension rheology can be tuned to minimize sagging as well as the well-known coffee-ring effect, an outcome which is important for industrial coating processes.

  19. Simulation of Interpersonal Transport of Expiratory Droplets and Droplet Nuclei between Two Standing Manikins

    DEFF Research Database (Denmark)

    Liu, Li; Y, Li,

    2012-01-01

    Interpersonal transport of expiratory droplets and droplet nuclei constitutes a prerequisite for the transmission of pathogens as well as the transmission of respiratory diseases. Numerical simulations considering droplet evaporation and droplet nucleus sizes were carried out, using two detailed...

  20. Rapidly pulsed helium droplet source

    Energy Technology Data Exchange (ETDEWEB)

    Pentlehner, Dominik; Riechers, Ricarda; Dick, Bernhard; Slenczka, Alkwin [Institute for Physical and Theoretical Chemistry, University of Regensburg, 93053 Regensburg (Germany); Even, Uzi; Lavie, Nachum; Brown, Raviv; Luria, Kfir [Sackler Faculty of Exact Sciences, School of Chemistry, Tel Aviv University, Ramat Aviv, 69978 Tel Aviv (Israel)

    2009-04-15

    A pulsed valve connected to a closed-cycle cryostat was optimized for producing helium droplets. The pulsed droplet beam appeared with a bimodal size distribution. The leading part of the pulse consists of droplets suitable for doping with molecules. The average size of this part can be varied between 10{sup 4} and 10{sup 6} helium atoms, and the width of the distribution is smaller as compared to a continuous-flow droplet source. The system has been tested in a single pulse mode and at repetition rates of up to 500 Hz with almost constant intensity. The droplet density was found to be increased by more than an order of magnitude as compared to a continuous-flow droplet source.

  1. Droplet microfluidics based microseparation systems.

    Science.gov (United States)

    Xiao, Zhiliang; Niu, Menglei; Zhang, Bo

    2012-06-01

    Lab on a chip (LOC) technology is a promising miniaturization approach. The feature that it significantly reduced sample consumption makes great sense in analytical and bioanalytical chemistry. Since the start of LOC technology, much attention has been focused on continuous flow microfluidic systems. At the turn of the century, droplet microfluidics, which was also termed segmented flow microfluidics, was introduced. Droplet microfluidics employs two immiscible phases to form discrete droplets, which are ideal vessels with confined volume, restricted dispersion, limited cross-contamination, and high surface area. Due to these unique features, droplet microfluidics proves to be a versatile tool in microscale sample handling. This article reviews the utility of droplet microfluidics in microanalytical systems with an emphasize on separation science, including sample encapsulation at ultra-small volume, compartmentalization of separation bands, isolation of droplet contents, and related detection techniques.

  2. Evaporation of inclined water droplets

    Science.gov (United States)

    Kim, Jin Young; Hwang, In Gyu; Weon, Byung Mook

    2017-02-01

    When a drop is placed on a flat substrate tilted at an inclined angle, it can be deformed by gravity and its initial contact angle divides into front and rear contact angles by inclination. Here we study on evaporation dynamics of a pure water droplet on a flat solid substrate by controlling substrate inclination and measuring mass and volume changes of an evaporating droplet with time. We find that complete evaporation time of an inclined droplet becomes longer as gravitational influence by inclination becomes stronger. The gravity itself does not change the evaporation dynamics directly, whereas the gravity-induced droplet deformation increases the difference between front and rear angles, which quickens the onset of depinning and consequently reduces the contact radius. This result makes the evaporation rate of an inclined droplet to be slow. This finding would be important to improve understanding on evaporation dynamics of inclined droplets.

  3. Evaporation of inclined water droplets

    Science.gov (United States)

    Kim, Jin Young; Hwang, In Gyu; Weon, Byung Mook

    2017-01-01

    When a drop is placed on a flat substrate tilted at an inclined angle, it can be deformed by gravity and its initial contact angle divides into front and rear contact angles by inclination. Here we study on evaporation dynamics of a pure water droplet on a flat solid substrate by controlling substrate inclination and measuring mass and volume changes of an evaporating droplet with time. We find that complete evaporation time of an inclined droplet becomes longer as gravitational influence by inclination becomes stronger. The gravity itself does not change the evaporation dynamics directly, whereas the gravity-induced droplet deformation increases the difference between front and rear angles, which quickens the onset of depinning and consequently reduces the contact radius. This result makes the evaporation rate of an inclined droplet to be slow. This finding would be important to improve understanding on evaporation dynamics of inclined droplets. PMID:28205642

  4. PHYSICOCHEMICAL PROPERTY CHANGES AND ENZYMATIC HYDROLYSIS ENHANCEMENT OF OIL PALM EMPTY FRUIT BUNCHES TREATED WITH SUPERHEATED STEAM

    Directory of Open Access Journals (Sweden)

    Ezyana Kamal Bahrin,

    2012-02-01

    Full Text Available The effect of superheated steam treatment on oil palm empty fruit bunches (OPEFB was investigated in terms of physicochemical property changes and enzymatic hydrolysis enhancement. The experimental treatment was carried out at different temperatures (140-210°C and durations (20-90 min. Results showed that as the superheated steam temperature and time increased, the size distribution also changed, resulting in more small particles. Analysis on the surface texture, color, and mechanical properties of the treated OPEFB also showed that significant changes resulted due to the superheated steam treatment. In support to this, Fourier Transform Infrared (FTIR spectroscopy and thermogravimetric (TG analyses showed that solubilization and removal of the hemicelluloses component also took place. As a result of this phenomenon, higher total sugar and glucose yield was achieved once the treated OPEFB was subjected to enzymatic hydrolysis. This suggests that superheated steam treatment could enhance OPEFB structure degradation for the preparation of a suitable substrate in order to produce a higher glucose yield in the enzymatic hydrolysis process.

  5. Droplets Evaporation on Heated Wall

    Directory of Open Access Journals (Sweden)

    Misyura S. Y.

    2015-01-01

    Full Text Available Various modes of evaporation in a wide range of droplet sizes and wall temperatures have been investigated in the present work. For any initial drop size there are three typical boiling regime: 1 the nucleate boiling; 2 the transitional regime; 3 the film boiling. The width of the transition region of boiling crisis increases with increasing the initial volume V0. Evaporation of large droplets at high superheat depends on the initial droplet shape.

  6. Small droplets on superhydrophobic substrates.

    Science.gov (United States)

    Gross, Markus; Varnik, Fathollah; Raabe, Dierk; Steinbach, Ingo

    2010-05-01

    We investigate the wetting behavior of liquid droplets on rough hydrophobic substrates for the case of droplets that are of comparable size to the surface asperities. Using a simple three-dimensional analytical free-energy model, we have shown in a recent letter [M. Gross, F. Varnik, and D. Raabe, EPL 88, 26002 (2009)] that, in addition to the well-known Cassie-Baxter and Wenzel states, there exists a further metastable wetting state where the droplet is immersed into the texture to a finite depth, yet not touching the bottom of the substrate. Due to this new state, a quasistatically evaporating droplet can be saved from going over to the Wenzel state and instead remains close to the top of the surface. In the present paper, we give an in-depth account of the droplet behavior based on the results of extensive computer simulations and an improved theoretical model. In particular, we show that releasing the assumption that the droplet is pinned at the outer edges of the pillars improves the analytical results for larger droplets. Interestingly, all qualitative aspects, such as the existence of an intermediate minimum and the "reentrant transition," remain unchanged. We also give a detailed description of the evaporation process for droplets of varying sizes. Our results point out the role of droplet size for superhydrophobicity and give hints for achieving the desired wetting properties of technically produced materials.

  7. Effects of nanoparticles on nanofluid droplet evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ruey-Hung [Univ. of Central Florida, Orlando, FL (United States). Dept. of Mechanical, Materials and Aerospace Engineering; Phuoc, Tran X. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Martello, Donald [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2010-09-01

    Laponite, Fe2O3 and Ag nanoparticles were added to deionized water to study their effect of evaporation rates. The results show that these nanofluid droplets evaporate at different rates (as indicated by the evaporation rate constant K in the well known D2-law) from the base fluid. Different particles lead to different values of K. As the particle concentration increases due to evaporation. K values of various Ag and Fe2O3 nanofluids go through a transition from one value to another, further demonstrating the effect of increasing nanoparticle concentration. The implication for the heat of vaporization (hfg) is discussed.

  8. Numerical Simulation of Vapor Bubble Growth and Heat Transfer in a Thin Liquid Film

    Institute of Scientific and Technical Information of China (English)

    TAO Yu-Jia; HUAI Xiu-Lan; LI Zhi-Gang

    2009-01-01

    A mathematical model is developed to investigate the dynamics of vapor bubble growth in a thin liquid film,movement of the interface between two fluids and the surface heat transfer characteristics. The model takes into account the effects of phase change between the vapor and liquid, gravity, surface tension and viscosity. The details of the multiphase flow and heat transfer are discussed for two cases: (1) when a water micro-droplet impacts a thin liquid fihn with a vapor bubble growing and (2) when the vapor bubble grows and merges with the vapor layer above the liquid film without the droplet impacting. The development trend of the interface between the vapor and liquid is coincident qualitatively with the available literature, mostly at the first stage. We also provide an important method to better understand the mechanism of nucleate spray cooling.

  9. Molecular dynamics simulations for the motion of evaporative droplets driven by thermal gradients along nanochannels

    KAUST Repository

    Wu, Congmin

    2013-04-04

    For a one-component fluid on a solid substrate, a thermal singularity may occur at the contact line where the liquid-vapor interface intersects the solid surface. Physically, the liquid-vapor interface is almost isothermal at the liquid-vapor coexistence temperature in one-component fluids while the solid surface is almost isothermal for solids of high thermal conductivity. Therefore, a temperature discontinuity is formed if the two isothermal interfaces are of different temperatures and intersect at the contact line. This leads to the so-called thermal singularity. The localized hydrodynamics involving evaporation/condensation near the contact line leads to a contact angle depending on the underlying substrate temperature. This dependence has been shown to lead to the motion of liquid droplets on solid substrates with thermal gradients (Xu and Qian 2012 Phys. Rev. E 85 061603). In the present work, we carry out molecular dynamics (MD) simulations as numerical experiments to further confirm the predictions made from our previous continuum hydrodynamic modeling and simulations, which are actually semi-quantitatively accurate down to the small length scales in the problem. Using MD simulations, we investigate the motion of evaporative droplets in one-component Lennard-Jones fluids confined in nanochannels with thermal gradients. The droplet is found to migrate in the direction of decreasing temperature of solid walls, with a migration velocity linearly proportional to the temperature gradient. This agrees with the prediction of our continuum model. We then measure the effect of droplet size on the droplet motion. It is found that the droplet mobility is inversely proportional to a dimensionless coefficient associated with the total rate of dissipation due to droplet movement. Our results show that this coefficient is of order unity and increases with the droplet size for the small droplets (∼10 nm) simulated in the present work. These findings are in semi

  10. Evaporation and ignition of droplets in combustion chambers modeling and simulation

    Science.gov (United States)

    Betelin, V. B.; Smirnov, N. N.; Nikitin, V. F.; Dushin, V. R.; Kushnirenko, A. G.; Nerchenko, V. A.

    2012-01-01

    Computer simulation of liquid fuel jet injection into heated atmosphere of combustion chamber, mixture formation, ignition and combustion need adequate modeling of evaporation, which is extremely important for the curved surfaces in the presence of strong heat and mass diffusion fluxes. Combustion of most widely spread hydrocarbon fuels takes place in a gas-phase regime. Thus, evaporation of fuel from the surface of droplets turns to be one of the limiting factors of the process as well. The problems of fuel droplets atomization, evaporation being the key factors for heterogeneous reacting mixtures, the non-equilibrium effects in droplets atomization and phase transitions will be taken into account in describing thermal and mechanical interaction of droplets with streaming flows. In the present paper processes of non-equilibrium evaporation of small droplets will be discussed. As it was shown before, accounting for non-equilibrium effects in evaporation for many types of widely used liquids is crucial for droplet diameters less than 100 μm, while the surface tension effects essentially manifest only for droplets below 0.1 μm. Investigating the behavior of individual droplets in a heated air flow allowed to distinguish two scenarios for droplet heating and evaporation. Small droplets undergo successively heating, then cooling due to heat losses for evaporation, and then rapid heating till the end of their lifetime. Larger droplets could directly be heated up to a critical temperature and then evaporate rapidly. Droplet atomization interferes the heating, evaporation and combustion scenario. The scenario of fuel spray injection and self-ignition in a heated air inside combustion chamber has three characteristic stages. At first stage of jet injection droplets evaporate very rapidly thus cooling the gas at injection point, the liquid jet is very short and changes for a vapor jet. At second stage liquid jet is becoming longer, because evaporation rate decreases due

  11. Influence of element Cu on hydrogen content in superheated aluminum melt

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The hydrogen content in molten Al-Cu alloy increases remarkably when the temperature of the melt rises to about 780  ℃. The effects of alloying element are theoretically analyzed in terms of Wagner interaction parameter. Furthermore, analyses indicate that the alloy element Cu plays an important role in the hydrogen content in superheated Al-Cu alloy melt below about 780  ℃. The conclusion is drawn that the degree of gassing in molten Al-Cu alloy is bound up with the properties of oxide film of Al alloy melts. The results make it clear that the hydrogen content in the molten aluminum reduces with increasing element Cu dissolved in aluminum melts at the same temperature.

  12. A neutron spectrometer based on temperature variations in superheated drop compositions

    CERN Document Server

    Apfel, R E

    2002-01-01

    The response of superheated drop detectors (SDDs) to neutron radiation varies in a self-consistent manner with variations in temperature and pressure, making such compositions suitable for neutron spectrometry. The advantage of this approach is that the response functions of candidate materials versus energy as the temperature or pressure is varied are nested and have distinct thresholds, with no thermal neutron response. These characteristics permit unfolding without the uncertainties associated with other spectrometry techniques, where multiple solutions are possible, thus requiring an initial guess of the spectrum. A spectrometer was developed based on the well-established technology for acoustic sensing of bubble events interfaced with a proportional-integral-derivative temperature controller. The active monitor for neutrons, called REMbrandt sup T sup M , was used as the platform for controlling temperature on a SDD probe and for data acquisition, thereby automating the process of measuring the neutron e...

  13. Effect of Melt Superheating Treatment on the Latent Heat Release of Sn

    Science.gov (United States)

    Xu, Junfeng; Dang, Bo; Fan, Dandan; Jian, Zengyun

    2017-03-01

    The accuracy of the baseline evaluation is of importance for calculating the transition enthalpy such as the latent heat of the crystallization. This study demonstrates the modified method of the equivalent non-latent heat baseline, by which the transition enthalpy can be measured accurately according to the transition peak in differential scanning calorimetric curve. With this method, the effect of melt superheating treatment time on the latent heat release upon the solidification of tin is investigated. The results show that the latent heat increases by increasing the treatment time, and is close to a constant when the treatment time is large enough, indicating the homogeneous system. And then, a simple model is established to describe the changes of the crystallization latent heat with the treatment time, which is confirmed by the experimental data of Sn.

  14. Superheated-drop (bubble) neutron detectors and their compliance with ICRP-60

    Energy Technology Data Exchange (ETDEWEB)

    d' Errico, F. (Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari Istituto Nazionale di Fisica Nucleare, Pisa (Italy)); Alberts, W.G. (Physikalisch-Technische Bundesanstalt, Braunschweig (Germany))

    1994-01-01

    Several devices based on superheated-drop detector technology have become available almost simultaneously with the release of new ICRP and ICRU publications. Given this circumstance, a study of the characteristics of the system has been undertaken by the authors considering the revised recommendations for neutron dosimetry. The dose equivalent response in free air has been examined experimentally as a function of energy from thermal up to 70 MeV neutrons, and its dependence on the angle of incidence has been tested on a phantom at 0.57 MeV. Some results are discussed with respect to lower limit of detection, temperature sensitivity, [gamma] discrimination, batch-to-batch uniformity, and reproducibility. Some conclusions in terms of advantages, limitations and possible applications of the system are presented. (author).

  15. Petroleum Vapor Intrusion

    Science.gov (United States)

    One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

  16. Spatiotemporal infrared measurement of interface temperatures during water droplet evaporation on a nonwetting substrate

    Science.gov (United States)

    Chandramohan, Aditya; Weibel, Justin A.; Garimella, Suresh V.

    2017-01-01

    High-fidelity experimental characterization of sessile droplet evaporation is required to understand the interdependent physical mechanisms that drive the evaporation. In particular, cooling of the interface due to release of the latent heat of evaporation, which is not accounted for in simplified vapor-diffusion-based models of droplet evaporation, may significantly suppress the evaporation rate on nonwetting substrates, which support tall droplet shapes. This suppression is counteracted by convective mass transfer from the droplet to the air. While prior numerical modeling studies have identified the importance of these mechanisms, there is no direct experimental evidence of their influence on the interfacial temperature distribution. Infrared thermography is used here to simultaneously measure the droplet volume, contact angle, and spatially resolved interface temperatures for water droplets on a nonwetting substrate. The technique is calibrated and validated to quantify the temperature measurement accuracy; a correction is employed to account for reflections from the surroundings when imaging the evaporating droplets. Spatiotemporally resolved interface temperature data, obtained via infrared thermography measurements, allow for an improved prediction of the evaporation rate and can be utilized to monitor temperature-controlled processes in droplets for various lab-on-a-chip applications.

  17. Cool-flame Extinction During N-Alkane Droplet Combustion in Microgravity

    Science.gov (United States)

    Nayagam, Vedha; Dietrich, Daniel L.; Hicks, Michael C.; Williams, Forman A.

    2014-01-01

    Recent droplet combustion experiments onboard the International Space Station (ISS) have revealed that large n-alkane droplets can continue to burn quasi-steadily following radiative extinction in a low-temperature regime, characterized by negative-temperaturecoefficient (NTC) chemistry. In this study we report experimental observations of n-heptane, n-octane, and n-decane droplets of varying initial sizes burning in oxygen/nitrogen/carbon dioxide and oxygen/helium/nitrogen environments at 1.0, 0.7, and 0.5 atmospheric pressures. The oxygen concentration in these tests varied in the range of 14% to 25% by volume. Large n-alkane droplets exhibited quasi-steady low-temperature burning and extinction following radiative extinction of the visible flame while smaller droplets burned to completion or disruptively extinguished. A vapor-cloud formed in most cases slightly prior to or following the "cool flame" extinction. Results for droplet burning rates in both the hot-flame and cool-flame regimes as well as droplet extinction diameters at the end of each stage are presented. Time histories of radiant emission from the droplet captured using broadband radiometers are also presented. Remarkably the "cool flame" extinction diameters for all the three n-alkanes follow a trend reminiscent of the ignition delay times observed in previous studies. The similarities and differences among the n-alkanes during "cool flame" combustion are discussed using simplified theoretical models of the phenomenon

  18. MATHEMATICAL MODELING OF NEAR-WALL FLOWS OF TWO-PHASE MIXTURE WITH EVAPORATING DROPLETS

    Institute of Scientific and Technical Information of China (English)

    WANG Bo-yi(王柏懿); A.N.Osiptsov

    2002-01-01

    In the framework of the two-continuum approach, using the matched asymptotic expansion method, the equations of a laminar boundary layer in mist flows with evaporating droplets were derived and solved. The similarity criteria controlling the mist flows were determined. For the flow along a curvilinear surface, the forms of the boundary layer equations differ from the regimes of presence and absence of the droplet inertia deposition.The numerical results were presented for the vapor-droplet boundary layer in the neighborhood of a stagnation point of a hot blunt body. It is demonstrated that, due to evaporation, a droplet-free region develops near the wall inside the boundary layer. On the upper edge of this region, the droplet radius tends to zero and the droplet number density becomes much higher than that in the free stream. The combined effect of the droplet evaporation and accumulation results in a significant enhancement of the heat transfer on the surface even for small mass concentration of the droplets in the free stream.

  19. Phenomenology of break-up modes in contact free externally heated nanoparticle laden fuel droplets

    Science.gov (United States)

    Pathak, Binita; Basu, Saptarshi

    2016-12-01

    We study thermally induced atomization modes in contact free (acoustically levitated) nanoparticle laden fuel droplets. The initial droplet size, external heat supplied, and suspended particle concentration (wt. %) in droplets govern the stability criterion which ultimately determines the dominant mode of atomization. Pure fuel droplets exhibit two dominant modes of breakup namely primary and secondary. Primary modes are rather sporadic and normally do not involve shape oscillations. Secondary atomization however leads to severe shape deformations and catastrophic intense breakup of the droplets. The dominance of these modes has been quantified based on the external heat flux, dynamic variation of surface tension, acoustic pressure, and droplet size. Addition of particles alters the regimes of the primary and secondary atomization and introduces bubble induced boiling and bursting. We analyze this new mode of atomization and estimate the time scale of bubble growth up to the point of bursting using energy balance to determine the criterion suitable for parent droplet rupture. All the three different modes of breakup have been well identified in a regime map determined in terms of Weber number and the heat utilization rate which is defined as the energy utilized for transient heating, vaporization, and boiling in droplets.

  20. Antifreeze protein-induced superheating of ice inside Antarctic notothenioid fishes inhibits melting during summer warming.

    Science.gov (United States)

    Cziko, Paul A; DeVries, Arthur L; Evans, Clive W; Cheng, Chi-Hing Christina

    2014-10-07

    Antifreeze proteins (AFPs) of polar marine teleost fishes are widely recognized as an evolutionary innovation of vast adaptive value in that, by adsorbing to and inhibiting the growth of internalized environmental ice crystals, they prevent death by inoculative freezing. Paradoxically, systemic accumulation of AFP-stabilized ice could also be lethal. Whether or how fishes eliminate internal ice is unknown. To investigate if ice inside high-latitude Antarctic notothenioid fishes could melt seasonally, we measured its melting point and obtained a decadal temperature record from a shallow benthic fish habitat in McMurdo Sound, Antarctica. We found that AFP-stabilized ice resists melting at temperatures above the expected equilibrium freezing/melting point (eqFMP), both in vitro and in vivo. Superheated ice was directly observed in notothenioid serum samples and in solutions of purified AFPs, and ice was found to persist inside live fishes at temperatures more than 1 °C above their eqFMP for at least 24 h, and at a lower temperature for at least several days. Field experiments confirmed that superheated ice occurs naturally inside wild fishes. Over the long-term record (1999-2012), seawater temperature surpassed the fish eqFMP in most summers, but never exceeded the highest temperature at which ice persisted inside experimental fishes. Thus, because of the effects of AFP-induced melting inhibition, summer warming may not reliably eliminate internal ice. Our results expose a potentially antagonistic pleiotropic effect of AFPs: beneficial freezing avoidance is accompanied by melting inhibition that may contribute to lifelong accumulation of detrimental internal ice crystals.

  1. Coalescence-induced droplet actuation

    Science.gov (United States)

    Sellier, Mathieu; Verdier, Claude; Nock, Volker

    2011-11-01

    This work investigates a little explored driving mechanism to actuate droplets: the surface tension gradient which arises during the coalescence of two droplets of liquid having different compositions and therefore surface tensions. The resulting surface tension gradient gives rise to a Marangoni flow which, if sufficiently large, can displace the droplet. In order to understand, the flow dynamics arising during the coalescence of droplets of different fluids, a model has been developed in the lubrication framework. The numerical results confirm the existence of a self-propulsion window which depends on two dimensionless groups representing competing effects during the coalescence: the surface tension contrast between the droplets which promotes actuation and species diffusion which tends to make the mixture uniform thereby anihilating Marangoni flow and droplet motion. In parallel, experiments have been conducted to confirm this self-propulsion behaviour. The experiment consists in depositing a droplet of distilled water on a ``hydrophilic highway.'' This stripe was obtained by plasma-treating a piece of PDMS shielded in some parts by glass coverslips. This surface functionalization was found to be the most convenient way to control the coalescence. When a droplet of ethanol is deposited near the ``water slug,'' coalescence occurs and a rapid motion of the resulting mixture is observed. The support of the Dumont d'Urville NZ-France Science & Technology program is gratefully acknowledged.

  2. Evaluation of evaporation coefficient for micro-droplets exposed to low pressure: A semi-analytical approach

    Science.gov (United States)

    Chakraborty, Prodyut R.; Hiremath, Kirankumar R.; Sharma, Manvendra

    2017-02-01

    Evaporation rate of water is strongly influenced by energy barrier due to molecular collision and heat transfer limitations. The evaporation coefficient, defined as the ratio of experimentally measured evaporation rate to that maximum possible theoretical limit, varies over a conflicting three orders of magnitude. In the present work, a semi-analytical transient heat diffusion model of droplet evaporation is developed considering the effect of change in droplet size due to evaporation from its surface, when the droplet is injected into vacuum. Negligible effect of droplet size reduction due to evaporation on cooling rate is found to be true. However, the evaporation coefficient is found to approach theoretical limit of unity, when the droplet radius is less than that of mean free path of vapor molecules on droplet surface contrary to the reported theoretical predictions. Evaporation coefficient was found to reduce rapidly when the droplet under consideration has a radius larger than the mean free path of evaporating molecules, confirming the molecular collision barrier to evaporation rate. The trend of change in evaporation coefficient with increasing droplet size predicted by the proposed model will facilitate obtaining functional relation of evaporation coefficient with droplet size, and can be used for benchmarking the interaction between multiple droplets during evaporation in vacuum.

  3. Evaluation of evaporation coefficient for micro-droplets exposed to low pressure: A semi-analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Prodyut R., E-mail: pchakraborty@iitj.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Jodhpur, 342011 (India); Hiremath, Kirankumar R., E-mail: k.r.hiremath@iitj.ac.in [Department of Mathematics, Indian Institute of Technology Jodhpur, 342011 (India); Sharma, Manvendra, E-mail: PG201283003@iitj.ac.in [Defence Laboratory Jodhpur, Defence Research & Development Organisation, 342011 (India)

    2017-02-05

    Evaporation rate of water is strongly influenced by energy barrier due to molecular collision and heat transfer limitations. The evaporation coefficient, defined as the ratio of experimentally measured evaporation rate to that maximum possible theoretical limit, varies over a conflicting three orders of magnitude. In the present work, a semi-analytical transient heat diffusion model of droplet evaporation is developed considering the effect of change in droplet size due to evaporation from its surface, when the droplet is injected into vacuum. Negligible effect of droplet size reduction due to evaporation on cooling rate is found to be true. However, the evaporation coefficient is found to approach theoretical limit of unity, when the droplet radius is less than that of mean free path of vapor molecules on droplet surface contrary to the reported theoretical predictions. Evaporation coefficient was found to reduce rapidly when the droplet under consideration has a radius larger than the mean free path of evaporating molecules, confirming the molecular collision barrier to evaporation rate. The trend of change in evaporation coefficient with increasing droplet size predicted by the proposed model will facilitate obtaining functional relation of evaporation coefficient with droplet size, and can be used for benchmarking the interaction between multiple droplets during evaporation in vacuum.

  4. DROPLET COLLISION AND COALESCENCE MODEL

    Institute of Scientific and Technical Information of China (English)

    LI Qiang; CAI Ti-min; HE Guo-qiang; HU Chun-bo

    2006-01-01

    A new droplet collision and coalescence model was presented, a quick-sort method for locating collision partners was also devised and based on theoretical and experimental results, further advancement was made to the droplet collision outcome.The advantages of the two implementations of smoothed particle hydrodynamics (SPH)method were used to limit the collision of droplets to a given number of nearest droplets and define the probability of coalescence, numerical simulations were carried out for model validation. Results show that the model presented is mesh-independent and less time consuming, it can not only maintains the system momentum conservation perfectly, but not susceptible to initial droplet size distribution as well.

  5. Droplet pattern and condensation gradient around a humidity sink.

    Science.gov (United States)

    Guadarrama-Cetina, J; Narhe, R D; Beysens, D A; González-Viñas, W

    2014-01-01

    We describe the evolution of a water drop saturated with NaCl and the growth of pure water droplets in a breath figure pattern (BF) condensing around it. This salty drop acts as a humidity sink, inhibiting the BF inside a ring at a distance r=δ from the sink center and slowing down BF growth outside the ring. The initial salty drop is taken either from a salt-saturated solution (type I experiment) or by placing an NaCl crystal on the substrate (type II experiment). The results are similar, provided that the initial time for type II evolution is taken at the end of the crystal dissolution. The evolution of the salty drop radius R is deduced from the establishment of a three-dimensional hyperbolic concentration profile around the salty drop. This profile scales with r/δ. Accounting for the salt concentration decrease with salty drop growth, R is seen to grow as t5. In the region r>δ, water droplets nucleate and grow. The rate of evolution of the water droplets at constant r/δ can be used to determine the local water pressure. The corresponding data reasonably agree with a hyperbolic water vapor profile around the salty drop. These results can be applied to the growth of BF patterns to determine whether hyperbolic or linear water vapor profiles apply.

  6. Water circulation in non-isothermal droplet-laden turbulent channel flow

    NARCIS (Netherlands)

    Russo, E.; Kuerten, J.G.M.; Geld, van der C.W.M.; Geurts, B.J.; Simos, T.; Psihoyios, G.; Tsitouras, Ch.

    2013-01-01

    We propose a point-particle model for two-way coupling of water droplets dispersed in turbulent flow of a carrier gas consisting of air and water vapor. An incompressible flow formulation is applied for direct numerical simulation (DNS) of turbulent channel flow with a warm and a cold wall. Compared

  7. Water circulation in non-isothermal droplet-laden turbulent channel flow

    NARCIS (Netherlands)

    Russo, E; Kuerten, Johannes G.M.; van der Geld, C.W.M.; Geurts, Bernardus J.; Simos, T.; Psihoyios, G.; Tsitouras, Ch.

    2013-01-01

    We propose a point-particle model for two-way coupling of water droplets dispersed in turbulent flow of a carrier gas consisting of air and water vapor. An incompressible flow formulation is applied for direct numerical simulation (DNS) of turbulent channel flow with a warm and a cold wall. Compared

  8. Correlation of Cloud Droplet Growth with the Scalar Fluctuations in a Turbulent Moist Convection

    Science.gov (United States)

    Chandrakar, Kamal Kant; Cantrell, Will; Chang, Kelken; Ciochetto, David; Niedermeier, Dennis; Ovchinnikov, Mikhail; Shaw, Raymond; Yang, Fan

    2016-11-01

    Cloud droplet growth in a turbulent environment is studied by creating turbulent moist Rayleigh-Bénard convection in the Michigan Tech Pi Chamber. Cloud formation is achieved by injecting aerosols into the water-supersaturated environment created by the isobaric mixing of saturated air at different temperatures. A range of steady-state cloud droplet number concentration is achieved by supplying aerosols at different rates. As steady-state droplet number concentration is decreased the mean droplet size increases as expected, but also the width of the size distribution increases. This increase in the width is associated with larger supersaturation fluctuations due to the slow droplet microphysical response (sink of the water vapor) compared to the fast turbulent mixing (source of the water vapor). The observed standard deviation of the squared droplet radius is a linear function of the combined time scale of the system τs- 1 =τc- 1 +τt- 1 ; here, τc is the phase relaxation time and τt is the turbulence correlation time. A stochastic differential equation approach for supersaturation also predicts the same linear response. This finding has significance for cloud-radiation budgets and precipitation formation. This work was supported by the National Science Foundation, Grant AGS-1623429.

  9. From Initial Nucleation to Cassie-Baxter State of Condensed Droplets on Nanotextured Superhydrophobic Surfaces

    Science.gov (United States)

    Lv, Cunjing; Zhang, Xiwen; Niu, Fenglei; He, Feng; Hao, Pengfei

    2017-02-01

    Understanding how droplet condensation happens plays an essential role for our fundamental insights of wetting behaviors in nature and numerous applications. Since there is a lack of study of the initial formation and growing processes of condensed droplets down to nano-/submicroscale, relevant underlying mechanisms remain to be explored. We report an in situ observation of vapor condensation on nano-/microtextured superhydrophobic surfaces using optical microscopy. An interesting picture of the vapor condensation, from the initial appearance of individual small droplets (≤1 μm) to a Cassie-Baxter wetting state (>30 μm), are exhibited. It is found that individual droplets preferentially nucleate at the top and the edge of single micropillars with very high apparent contact angles on the nanotextures. Scenarios of two distinguished growing modes are reported statistically and the underlying mechanisms are discussed in the view of thermodynamics. We particularly reveal that the formation of the Cassie-Baxter wetting state is a result of a continuous coalescence of individual small droplets, in which the nanotexture-enhanced superhydrophobicity plays a crucial role. We envision that these fundamental findings can deepen our understanding of the nucleation and development of condensed droplets in nanoscale, so as to optimize design strategies of superhydrophobic materials for a broad range of water-harvesting and heat-transfer systems.

  10. Cloud liquid water, mean droplet radius, and number density measurements using a Raman lidar

    Energy Technology Data Exchange (ETDEWEB)

    Whiteman, David N. [Laser Remote Sensing Branch, NASA Goddard Space Flight Center, Greenbelt, Maryland (United States); Melfi, S. Harvey [Department of Physics, University of Maryland, Baltimore County, Baltimore (United States)

    1999-12-27

    A new technique for measuring cloud liquid water, mean droplet radius, and droplet number density is outlined. The technique is based on simultaneously measuring Raman and Mie scattering from cloud liquid droplets using a Raman lidar. Laboratory experiments on liquid microspheres have shown that the intensity of Raman scattering is proportional to the amount of liquid present in the spheres. This fact is used as a constraint on calculated Mie intensity assuming a gamma function particle size distribution. The resulting retrieval technique is shown to give stable solutions with no false minima. It is tested using Raman lidar data where the liquid water signal was seen as an enhancement to the water vapor signal. The general relationship of retrieved average radius and number density is consistent with traditional cloud physics models. Sensitivity to the assumed maximum cloud liquid water amount and the water vapor mixing ratio calibration are tested. Improvements to the technique are suggested. (c) 1999 American Geophysical Union.

  11. Fragmentation dynamics of liquid-metal droplets under ultra-short laser pulses

    Science.gov (United States)

    Basko, M. M.; Krivokorytov, M. S.; Vinokhodov, A. Yu; Sidelnikov, Yu V.; Krivtsun, V. M.; Medvedev, V. V.; Kim, D. A.; Kompanets, V. O.; Lash, A. A.; Koshelev, K. N.

    2017-03-01

    We present the measurements and theoretical analysis of the deformation and fragmentation of spherical liquid-metal drops by picosecond and subpicosecond laser pulses. In the experiments, 60 μm droplets of Sn-In alloy were irradiated by Ti:Sa laser pulses with a peak energy fluence of  ˜100 J cm-2. The observed evolution of the droplet shape dramatically differs from that previously reported for nanosecond pulses. Invoking 2D hydrodynamic simulations, we explain how, due to the specifics of matter dynamics in the liquid-vapor phase coexistence region, a liquid droplet is transformed into a characteristic acorn-like expanding shell with two inner cavities. High sensitivity of the measured shell parameters to the details of the equation of state and metastable dynamics suggests that such experiments offer new possibilities in exploration of thermophysical properties of metals in the region of liquid-vapor phase transition.

  12. Cloud Liquid Water, Mean Droplet Radius and Number Density Measurements Using a Raman Lidar

    Science.gov (United States)

    Whiteman, David N.; Melfi, S. Harvey

    1999-01-01

    A new technique for measuring cloud liquid water, mean droplet radius and droplet number density is outlined. The technique is based on simultaneously measuring Raman and Mie scattering from cloud liquid droplets using a Raman lidar. Laboratory experiments on liquid micro-spheres have shown that the intensity of Raman scattering is proportional to the amount of liquid present in the spheres. This fact is used as a constraint on calculated Mie intensity assuming a gamma function particle size distribution. The resulting retrieval technique is shown to give stable solutions with no false minima. It is tested using Raman lidar data where the liquid water signal was seen as an enhancement to the water vapor signal. The general relationship of retrieved average radius and number density is consistent with traditional cloud physics models. Sensitivity to the assumed maximum cloud liquid water amount and the water vapor mixing ratio calibration are tested. Improvements to the technique are suggested.

  13. Fourier-Transform Infrared Absorption Spectroscopy in Binary Hydrocarbon-Alcohol Single Droplet Evaporation

    Directory of Open Access Journals (Sweden)

    Shane R. Daly

    2016-01-01

    Full Text Available Broadband absorption spectroscopy, by way of FTIR, was used to investigate the vapor cloud of a single millimeter sized liquid droplet suspended by a syringe as it evaporates at standard conditions. Single beam data were collected every 8 seconds resulting in a time-resolved record. Species concentrations were tracked using their resonant absorption peaks and correlated with a multidimensional numerical model. The numerical model combined a Gaussian beam transmission through a temporally changing spherical vapor cloud with radial concentration gradients, informed by the D2 law and interpreted using the Abel transform. There was fair agreement with temporal evaporation trends for single component runs. Multicomponent experiments of ethanol and isooctane showed synergistic blending effects and preferential evaporation of ethanol. Droplets were also suspended by a thermocouple to track the droplet temperature over time as they were subject to evaporative cooling. This work is the foundation of a basic technique for collecting useful data to inform a complex transport problem.

  14. Non-Intrusive, Real-Time, On-Line Temperature Sensor for Superheated Hydrogen at High Pressure and High Flow Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The SSC needs a hydrogen temperature sensor that can provide high accuracy, fast response and can be operated on a superheated hydrogen (SHH2) environment. This will...

  15. Lossless droplet transfer of droplet-based microfluidic analysis

    Science.gov (United States)

    Kelly, Ryan T [West Richland, WA; Tang, Keqi [Richland, WA; Page, Jason S [Kennewick, WA; Smith, Richard D [Richland, WA

    2011-11-22

    A transfer structure for droplet-based microfluidic analysis is characterized by a first conduit containing a first stream having at least one immiscible droplet of aqueous material and a second conduit containing a second stream comprising an aqueous fluid. The interface between the first conduit and the second conduit can define a plurality of apertures, wherein the apertures are sized to prevent exchange of the first and second streams between conduits while allowing lossless transfer of droplets from the first conduit to the second conduit through contact between the first and second streams.

  16. Liquid Droplet Detachment and Entrainment in Microscale Flows

    Science.gov (United States)

    Hidrovo, Carlos

    2005-11-01

    In this talk we will present a first order study of liquid water detachment and entrainment into air flows in hydrophobic microchannels. Silicon based microstructures consisting of 23 mm long U-shaped channels of different geometry were used for this purpose. The structures are treated with a Molecular Vapor Deposition (MVD) process that renders them hydrophobic. Liquid water is injected through a side slot located 2/3 of the way downstream from the air channel inlet. The water entering the air channel beads up into slugs or droplets that grow in size at this injection location until they fill and flood the channel or are carried away by the air flow. The slugs/droplets dimensions at detachment are correlated against superficial gas velocity and proper dimensionless parameters are postulated and examined to compare hydrodynamic forces against surface tension. It is found that slug/droplet detachment is dominated by two main forces: pressure gradient drag, arising from confinement of a viscous flow in the channel, and inertial drag, arising from the stagnation of the air due to obstruction by the slugs/droplets. A detachment regime map is postulated based on the relative importance of these forces under different flow conditions.

  17. Droplets, Bubbles and Ultrasound Interactions.

    Science.gov (United States)

    Shpak, Oleksandr; Verweij, Martin; de Jong, Nico; Versluis, Michel

    2016-01-01

    The interaction of droplets and bubbles with ultrasound has been studied extensively in the last 25 years. Microbubbles are broadly used in diagnostic and therapeutic medical applications, for instance, as ultrasound contrast agents. They have a similar size as red blood cells, and thus are able to circulate within blood vessels. Perfluorocarbon liquid droplets can be a potential new generation of microbubble agents as ultrasound can trigger their conversion into gas bubbles. Prior to activation, they are at least five times smaller in diameter than the resulting bubbles. Together with the violent nature of the phase-transition, the droplets can be used for local drug delivery, embolotherapy, HIFU enhancement and tumor imaging. Here we explain the basics of bubble dynamics, described by the Rayleigh-Plesset equation, bubble resonance frequency, damping and quality factor. We show the elegant calculation of the above characteristics for the case of small amplitude oscillations by linearizing the equations. The effect and importance of a bubble coating and effective surface tension are also discussed. We give the main characteristics of the power spectrum of bubble oscillations. Preceding bubble dynamics, ultrasound propagation is introduced. We explain the speed of sound, nonlinearity and attenuation terms. We examine bubble ultrasound scattering and how it depends on the wave-shape of the incident wave. Finally, we introduce droplet interaction with ultrasound. We elucidate the ultrasound-focusing concept within a droplets sphere, droplet shaking due to media compressibility and droplet phase-conversion dynamics.

  18. Sphere to ring morphological transformation in drying nanofluid droplets in a contact-free environment.

    Science.gov (United States)

    Miglani, Ankur; Basu, Saptarshi

    2015-03-21

    Understanding the transients of buckling in drying colloidal suspensions is pivotal for producing new functional microstructures with tunable morphologies. Here, we report first observations and elucidate the buckling instability induced morphological transition (sphere to ring structure) in an acoustically levitated, heated nanosuspension droplet using dynamic energy balance. Droplet deformation featuring the formation of symmetric cavities is initiated by capillary pressure that is two to three orders of magnitude greater than the acoustic radiation pressure, thus indicating that the standing pressure field has no influence on the buckling front kinetics. With an increase in heat flux, the growth rate of surface cavities and their post-buckled volume increase while the buckling time period reduces, thereby altering the buckling pathway and resulting in distinct precipitate structures. However, irrespective of the heating rate, the volumetric droplet deformation exhibits a linear time dependence and the droplet vaporization is observed to deviate from the classical D(2)-law.

  19. Heat Transfer through a Condensate Droplet on Hydrophobic and Nanostructured Superhydrophobic Surfaces.

    Science.gov (United States)

    Chavan, Shreyas; Cha, Hyeongyun; Orejon, Daniel; Nawaz, Kashif; Singla, Nitish; Yeung, Yip Fun; Park, Deokgeun; Kang, Dong Hoon; Chang, Yujin; Takata, Yasuyuki; Miljkovic, Nenad

    2016-08-09

    Understanding the fundamental mechanisms governing vapor condensation on nonwetting surfaces is crucial to a wide range of energy and water applications. In this paper, we reconcile classical droplet growth modeling barriers by utilizing two-dimensional axisymmetric numerical simulations to study individual droplet heat transfer on nonwetting surfaces (90° distribution theory is incorporated to show that previous modeling approaches underpredict the overall heat transfer by as much as 300% for dropwise and jumping-droplet condensation. To verify our simulation results, we study condensed water droplet growth using optical and environmental scanning electron microscopy on biphilic samples consisting of hydrophobic and nanostructured superhydrophobic regions, showing excellent agreement with the simulations for both constant base area and constant contact angle growth regimes. Our results demonstrate the importance of resolving local heat transfer effects for the fundamental understanding and high fidelity modeling of phase change heat transfer on nonwetting surfaces.

  20. High effectiveness liquid droplet/gas heat exchanger for space power applications

    Science.gov (United States)

    Bruckner, A. P.; Mattick, A. T.

    A high-effectiveness liquid droplet/gas heat exchanger (LDHX) concept for thermal management in space is described. Heat is transferred by direct contact between fine droplets (≈ 100-300 μm dia.) of a suitable low vapor pressure liquid and an inert working gas. Complete separation of the droplet and gas media in the zero-g environment is accomplished by configuring the LDHX as a vortex chamber. The large heat transfer area presented by the small droplets permits heat exchanger effectiveness of 0.9-0.95 in a compact, lightweight geometry which avoids many of the limitations of conventional plate and fin or tube and shell heat exchangers, such as their tendency toward single point failure. The application of the LDHX in a high temperature Brayton cycle is discussed to illustrate the performance and operational characteristics of this new heat exchanger concept.

  1. Detailed finite element method modeling of evaporating multi-component droplets

    Energy Technology Data Exchange (ETDEWEB)

    Diddens, Christian, E-mail: C.Diddens@tue.nl

    2017-07-01

    The evaporation of sessile multi-component droplets is modeled with an axisymmetic finite element method. The model comprises the coupled processes of mixture evaporation, multi-component flow with composition-dependent fluid properties and thermal effects. Based on representative examples of water–glycerol and water–ethanol droplets, regular and chaotic examples of solutal Marangoni flows are discussed. Furthermore, the relevance of the substrate thickness for the evaporative cooling of volatile binary mixture droplets is pointed out. It is shown how the evaporation of the more volatile component can drastically decrease the interface temperature, so that ambient vapor of the less volatile component condenses on the droplet. Finally, results of this model are compared with corresponding results of a lubrication theory model, showing that the application of lubrication theory can cause considerable errors even for moderate contact angles of 40°. - Graphical abstract:.

  2. Composition measurement of bicomponent droplets using laser-induced fluorescence of acetone

    Science.gov (United States)

    Maqua, C.; Depredurand, V.; Castanet, G.; Wolff, M.; Lemoine, F.

    2007-12-01

    Commercial fuels are complex mixtures, the evaporation of which remains particularly difficult to model. Experimental characterization of the differential vaporization of the components is a problem that is seldom addressed. In this paper, the evaporation of binary droplets made of ethyl-alcohol and acetone is investigated using a technique of measurement of the droplet composition developed in purpose. This technique exploits the laser induced fluorescence of acetone which acts as a fluorescent tracer as well as the more volatile component of the fuel associated with an accurate measurement of the droplet diameter by forward scattering interferometry. A model of the fluorescence intensity of the binary mixture, taking into account the absorption of the acetone molecules, is proposed and validated. The sensitivity of the technique is discussed. Finally, the reliability of the technique is demonstrated on binary combusting droplets in linear stream.

  3. High effectiveness liquid droplet/gas heat exchanger for space power applications

    Science.gov (United States)

    Bruckner, A. P.; Mattick, A. T.

    1983-01-01

    A high-effectiveness liquid droplet/gas heat exchanger (LDHX) concept for thermal management in space is described. Heat is transferred by direct contact between fine droplets (approximately 100-300 microns in diameter) of a suitable low vapor pressure liquid and an inert working gas. Complete separation of the droplet and gas media in the zero-g environment is accomplished by configuring the LDHX as a vortex chamber.The large heat transfer area presented by the small droplets permits heat exchanger effectiveness of 0.9-0.95 in a compact, lightweight geometry which avoids many of the limitations of conventional plate and fin or tube and shell heat exchangers, such as their tendency toward single point failure. The application of the LDHX in a high temperature Brayton cycle is discussed to illustrate the performance and operational characteristics of this new heat exchanger concept.

  4. Thermal Hydraulic Design and Analysis of a Water-Cooled Ceramic Breeder Blanket with Superheated Steam for CFETR

    Science.gov (United States)

    Cheng, Xiaoman; Ma, Xuebin; Jiang, Kecheng; Chen, Lei; Huang, Kai; Liu, Songlin

    2015-09-01

    The water-cooled ceramic breeder blanket (WCCB) is one of the blanket candidates for China fusion engineering test reactor (CFETR). In order to improve power generation efficiency and tritium breeding ratio, WCCB with superheated steam is under development. The thermal-hydraulic design is the key to achieve the purpose of safe heat removal and efficient power generation under normal and partial loading operation conditions. In this paper, the coolant flow scheme was designed and one self-developed analytical program was developed, based on a theoretical heat transfer model and empirical correlations. Employing this program, the design and analysis of related thermal-hydraulic parameters were performed under different fusion power conditions. The results indicated that the superheated steam water-cooled blanket is feasible. supported by the National Special Project for Magnetic Confined Nuclear Fusion Energy of China (Nos. 2013GB108004, 2014GB122000 and 2014GB119000), and National Natural Science Foundation of China (No. 11175207)

  5. Experimental investigation on combustion of hydrogen-oxygen and methane-oxygen mixtures in the medium of low-superheated steam

    Science.gov (United States)

    Pribaturin, N. A.; Fedorov, V. A.; Alekseev, M. V.; Bogomolov, A. R.; Sorokin, A. L.; Azikhanov, S. S.; Shevyrev, S. A.

    2016-05-01

    Experimental data are represented on the investigation of combustion of hydrogen-oxygen and methane-oxygen mixtures in the medium of low-superheated (initial temperature of approximately 150°C) steam at atmospheric pressure. The influence of the ratio of mass flows of the combustible mixture and steam on the qualitative composition of combustion products and the temperature of produced steam is revealed. Main laws for combustion of the hydrogen-oxygen mixture within the steam flow, which affect the completeness of mixture combustion, are determined. Experimental data on the influence of concentrations of the hydrogen-oxygen mixture within the flow of the steam and the combustible mixture upon the completeness of combustion are given. It is found that, when burning the hydrogen-oxygen mixture within the steam flow with a temperature of 1000-1200°C, it is possible using a variation of the combustible mixture flow. At the same time, the volume fraction of noncondensable gases in the produced steam is no more than 2%. It is revealed that there are several combustion modes of the hydrogen-oxygen mixture within the steam flow, in which, in one case, the steam always suppresses combustion and, in another one, detonation of the combustible mixture combustible mixture occurs. It is found that with the excess air factor close to unit, the combustion of the methane-oxygen mixture within steam and the vapor conversion of methane, which result in the appearance of free hydrogen in the produced high-temperature steam, are possible. The description and the principle of the operation of the experimental bench for investigation of combustion of methane-oxygen and hydrogen-oxygen mixtures in the medium of steam are given. Results of experimental investigations of burning fuel and oxygen in the medium of steam are used in the development of a steam superheater for a hightemperature steam turbine.

  6. Suppression in droplet growth kinetics by the addition of organics to sulfate particles

    Science.gov (United States)

    Wong, Jenny P. S.; Liggio, John; Li, Shao-Meng; Nenes, Athanasios; Abbatt, Jonathan P. D.

    2014-11-01

    Aerosol-cloud interactions are affected by the rate at which water vapor condenses onto particles during cloud droplet growth. Changes in droplet growth rates can impact cloud droplet number and size distribution. The current study investigated droplet growth kinetics of acidic and neutral sulfate particles which contained various amounts and types of organic compounds, from model compounds (carbonyls) to complex mixtures (α-pinene secondary organic aerosol and diesel engine exhaust). In most cases, the formed droplet size distributions were shifted to smaller sizes relative to control experiments (pure sulfate particles), due to suppression in droplet growth rates in the cloud condensation nuclei counter. The shift to smaller droplets correlated with increasing amounts of organic material, with the largest effect observed for acidic seed particles at low relative humidity. For all organics incorporated onto acidic particles, formation of high molecular weight compounds was observed, probably by acid-catalyzed Aldol condensation reactions in the case of carbonyls. To test the reversibility of this process, carbonyl experiments were conducted with acidic particles exposed to higher relative humidity. High molecular weight compounds were not measured in this case and no shift in droplet sizes was observed, suggesting that high molecular weight compounds are the species affecting the rate of water uptake. While these results provide laboratory evidence that organic compounds can slow droplet growth rates, the modeled mass accommodation coefficient of water on these particles (α > 0.1) indicates that this effect is unlikely to significantly affect cloud properties, consistent with infrequent field observations of slower droplet growth rates.

  7. Experiments on Nitrogen Oxide Production of Droplet Arrays Burning under Microgravity Conditions

    Science.gov (United States)

    Moesl, Klaus; Sattelmayer, Thomas; Kikuchi, Masao; Yamamoto, Shin; Yoda, Shinichi

    The optimization of the combustion process is top priority in current aero-engine and aircraft development, particularly from the perspectives of high efficiency, minimized fuel consumption, and a sustainable exhaust gas production. Aero-engines are exclusively liquid-fueled with a strong correlation between the combustion temperature and the emissions of nitric oxide (NOX ). Due to safety concerns, the progress in NOX reduction has been much slower than in stationary gas turbines. In the past, the mixing intensity in the primary zone of aero-engine combustors was improved and air staging implemented. An important question for future aero-engine combustors, consequently, is how partial vaporization influences the NOX emissions of spray flames? In order to address this question, the combustion of partially vaporized, linear droplet arrays was studied experimentally under microgravity conditions. The influence of fuel pre-vaporization on the NOX emissions was assessed in a wide range. The experiments were performed in a drop tower and a sounding rocket campaign. The microgravity environment provided ideal experiment conditions without the disturbing ef-fect of natural convection. This allowed the study of the interacting phenomena of multi-phase flow, thermodynamics, and chemical kinetics. This way the understanding of the physical and chemical processes related to droplet and spray combustion could be improved. The Bremen drop tower (ZARM) was utilized for the precursor campaign in July 2008, which was com-prised of 30 drops. The sounding rocket experiments, which totaled a microgravity duration of 6 minutes, were finally performed on the flight of TEXUS-46 in November 2009. On both campaigns the "Japanese Combustion Module" (JCM) was used. It is a cooperative experi-ment on droplet array combustion between the Japan Aerospace Exploration Agency (JAXA) and ESA's (European Space Agency) research team, working on the combustion properties of partially premixed sprays

  8. Self-aggregation of vapor-liquid phase transition

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The concept of the molecular free path is introduced to derive a criterion distinguishing active molecules from inactive molecules in liquid phase. Based on molecular self-aggregation theory a concept of the critical aggregation concentration (CAC) of active molecules is proposed to describe the physical configuration before the formation of the nuclei in the process of vapor-liquid phase transition. All active molecules exist in the form of the monomer when the concentration of active molecules is lower than CAC, while the active molecules will generate aggregation once the concentration of the active molecules reaches CAC. However, these aggregates with the aggregation number N smaller than 5 can steadily exist in bulk phase. The other excess active molecules can only produce infinite aggregation and form a critical nucleus of vapor-liquid phase transition. Without outer perturbation the state point of CAC corresponds to the critical superheated or supercooled state in the process of vapor-liquid phase transition. With the aggregate property, the interfacial tension between the bulk phase and the tiny new phase is predicted and a correction is made for the classical nucleation rate in a quite good agreement with experimental results.

  9. Simulation of Interpersonal Transport of Expiratory Droplets and Droplet Nuclei between Two Standing Manikins

    DEFF Research Database (Denmark)

    Liu, Li; Y, Li,

    2012-01-01

    Interpersonal transport of expiratory droplets and droplet nuclei constitutes a prerequisite for the transmission of pathogens as well as the transmission of respiratory diseases. Numerical simulations considering droplet evaporation and droplet nucleus sizes were carried out, using two detailed...... the existence of direct spray route of the interpersonal transport of expiratory droplets....

  10. Evaluation of the thermal effect on separation selectivity in anion-exchange processes using superheated water ion-exchange chromatography.

    Science.gov (United States)

    Shibukawa, Masami; Taguchi, Akihiko; Suzuki, Yusuke; Saitoh, Kazunori; Hiaki, Toshihiko; Yarita, Takashi

    2012-07-07

    The thermal effect on retention and separation selectivity of inorganic anions and aromatic sulfonate ions in anion-exchange chromatography is studied on a quaternized styrene-divinylbenzene copolymer anion-exchange column in the temperature range of 40-120 °C using superheated water chromatography. The selectivity coefficient for a pair of identically charged anions approaches unity as temperature increases provided the ions have the same effective size, such that the retention of an analyte ion decreases with an increase in temperature when the analyte ion has stronger affinity for the ion-exchanger than that of the eluent counterion, whereas it increases when it has weaker affinity. The change in anion-exchange selectivity with temperature observed with superheated water chromatography has been discussed on the basis of the effect of temperature on hydration of the ions. At elevated temperatures, especially in superheated water, the electrostatic interaction or association of the ions with the fixed ion in the resin phase becomes a predominant factor resulting in a different separation selectivity from that obtained at ambient temperature.

  11. Emission estimation of neat paradise tree oil combustion assisted with superheated hydrogen in a 4-stroke natural aspirated DICI engine

    Directory of Open Access Journals (Sweden)

    Sundararajan Karthikayan

    2016-01-01

    Full Text Available This research work investigates the use of neat paradise tree oil in a 4-stroke natural aspirated direct injection compression ignition engine assisted with the help of super-heated hydrogen (hydrogen in gaseous state or above its saturation temperature as a combustion improver. The high calorific gaseous fuel hydrogen gas was used as a combustion improver and admitted into the engine during the suction stroke. A 4-stroke single cylinder Diesel engine was chosen and its operating parameters were suitably modified. Neat paradise tree oil was admitted through standard injector of the engine and hydrogen was admitted through induction manifold. Inducted super-heated hydrogen was initiated the intermediate compounds combustion of neat paradise tree oil. This process offers higher temperature combustion and results in complete combustion of heavier molecules of neat paradise tree oil within shorter duration. The results of the experiment reveal that 40% higher NOx, 20% lower smoke, 5% lower CO, and 45% lower HC than that of neat paradise tree oil fuel operation and the admission of superheated hydrogen has improved the combustion characteristics of neat paradise tree oil. The investigation successfully proved that the application of neat paradise tree oil with 15% of hydrogen improver is possible under a regular Diesel engine with minimal engine modification.

  12. Role of superheated water in the origin of life; Seimei no kigen ni hatashita nessui no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Yanagawa, H. [Mitsubishi Kasei Corp., Tokyo (Japan)

    1994-09-01

    High-temperature hot water environments at the bottom of seas are drawing attentions recently. This paper describes the consideration on actions of superheated water that contribute to the origin of life. Gushing of superheated water from cracks in ocean bottoms is discovered in the eastern Pacific oceanic rises, Okinawa and other parts of the world. Jet holes are characterized by having higher concentration in such a reducing gas as methane (CH4), and being more reducing than the surrounding sea water. Concentrations of ions of metals such as Fe is 1000 times or more higher than that in the sea water, which is advantageous for organics composing reaction in the superheated water. An investigation has been carried out on organics synthesis under the environment where ocean bottom hot water jet holes exist. Sea waters were manufactured on an experimental basis by using a hot water jetting hole model. As a result of various discussions, proteins such as glycine, amino acid, and non-protein {beta}-alanine were produced. With respect to the evolution of chemical actions, high-pressure heating of mixed solution containing glycine has generated microsphere. Temperature dependence of peptide generation was also made clear. Regarding the hydrogen fugacity at the actual jetting holes, the stability of amino acid is remarkably increased when 1% H2 is added into the pressurizing N2. 6 refs., 2 figs.

  13. Superheated water ion-exchange chromatography: an experimental approach for interpretation of separation selectivity in ion-exchange processes.

    Science.gov (United States)

    Shibukawa, Masami; Shimasaki, Tomomi; Saito, Shingo; Yarita, Takashi

    2009-10-01

    Cation-exchange selectivity for alkali and alkaline-earth metal ions and tetraalkylammonium ions on a strongly acidic sulfonic acid cation-exchange resin has been investigated in the temperature range of 40-175 degrees C using superheated water chromatography. Dependence of the distribution coefficient (ln KD) on the reciprocal of temperature (1/T) is not linear for most of the ions studied, and the selectivity coefficient for a pair of alkali metal ions or that of alkaline-earth metal ions approaches unity as temperature increases. On the other hand, the retention order of tetraalkylammonium ions is reversed at 160 degrees C or above when eluted with Na2SO4 aqueous solution and the larger ions are eluted faster than the smaller ones contrary to the retention order obtained at ambient temperature. The change in ion-exchange selectivity with temperature observed with superheated water chromatography has been discussed on the basis of the effect of temperature on hydration of the ions and specific adsorption or distribution of ionic species between the external solution and ion-exchange resin. In superheated water, the electrostatic interaction or association of the ions with the fixed ion becomes a predominant mechanism resulting in different separation selectivity from that obtained at ambient temperature.

  14. Experimental Study on the Combustion and Microexplosion of Freely Falling Gelled Unsymmetrical Dimethylhydrazine (UDMH Fuel Droplets

    Directory of Open Access Journals (Sweden)

    Jianjun Wu

    2012-08-01

    Full Text Available The increasing demand for high energy density fuels and the concern for their safety have propelled research in the field of gelled propellants, where understanding the combustion of single gelled fuel droplets is the first stage to predict the spray combustion characteristics. The experiments utilized single-isolated freely falling gelled unsymmetrical dimethylhydrazine (UDMH droplets instead of the conventional suspended droplet approach, in order to eliminate the perturbation associated with the suspension mechanism. Morphological transformations of the gelled droplet involved in the combustion processes were monitored by employing a high-speed digital camera, while the effects of ambient pressure and oxygen concentration on burning rate constants were also studied. The experimental results show that four main phenomena (droplet deformation, bubble formation and growth, vapor jetting and luminous jetting flame with “horn” shape and three distinct phases were identified in the droplet combustion process; the high yield stress and polymer chain structure of polymer gellant are responsible for the appearance of bubbles with almost the same order of magnitude as the droplets. Increasing the ambient pressure can increase the burning rate, postpone the appearance of microexplosions, and weaken microexplosion intensity; while increasing the ambient oxygen concentration can promote the appearance of microexplosions, strengthen microexplosion intensity and increase the burning rate.

  15. Spatially and temporally resolved measurements of the temperature inside droplets impinging on a hot solid surface

    Science.gov (United States)

    Chaze, William; Caballina, Ophélie; Castanet, Guillaume; Lemoine, Fabrice

    2017-08-01

    Heat transfers at the impact of a droplet on a hot solid surface are investigated experimentally. Millimeter-sized water droplets impinge a flat sapphire window heated at 600 °C. The time evolution of the droplet temperature is characterized using the two-color laser-induced fluorescence technique. For that, a Q-switched Nd:YAG laser is used for the excitation of the fluorescence to obtain instantaneous images of the droplet temperature. Water is seeded with two fluorescent dyes, one sensitive to temperature (fluorescein disodium) and the other not (sulforhodamine 640). Owing to a wavelength shift between the dyes' emissions, the fluorescence signal of the dyes can be detected separately by two cameras. The liquid temperature is determined with a good accuracy by doing the ratio of the images of the dyes' fluorescence. A critical feature of the method is that the image ratio is not disturbed by the deformation of the impacting droplet, which affects the signals of the dyes almost identically. Experiments are performed in the conditions of film boiling. A thin vapor film at the interface between the droplet and the solid surface prevents the deposition of liquid on the hot solid surface. Measurements highlight some differences in the rate of heat transfers and in the temperature distribution within the droplet between the bouncing and splashing regimes of impact.

  16. Evaporation of sessile droplets affected by graphite nanoparticles and binary base fluids.

    Science.gov (United States)

    Zhong, Xin; Duan, Fei

    2014-11-26

    The effects of ethanol component and nanoparticle concentration on evaporation dynamics of graphite-water nanofluid droplets have been studied experimentally. The results show that the formed deposition patterns vary greatly with an increase in ethanol concentration from 0 to 50 vol %. Nanoparticles have been observed to be carried to the droplet surface and form a large piece of aggregate. The volume evaporation rate on average increases as the ethanol concentration increases from 0 to 50 vol % in the binary mixture nanofluid droplets. The evaporation rate at the initial stage is more rapid than that at the late stage to dry, revealing a deviation from a linear fitting line, standing for a constant evaporation rate. The deviation is more intense with a higher ethanol concentration. The ethanol-induced smaller liquid-vapor surface tension leads to higher wettability of the nanofluid droplets. The graphite nanoparticles in ethanol-water droplets reinforce the pinning effect in the drying process, and the droplets with more ethanol demonstrate the depinning behavior only at the late stage. The addition of graphite nanoparticles in water enhances a droplet baseline spreading at the beginning of evaporation, a pinning effect during evaporation, and the evaporation rate. However, with a relatively high nanoparticle concentration, the enhancement is attenuated.

  17. Droplet depinning in a wake

    Science.gov (United States)

    Hooshanginejad, Alireza; Lee, Sungyon

    2017-03-01

    Pinning and depinning of a windswept droplet on a surface is familiar yet deceptively complex for it depends on the interaction of the contact line with the microscopic features of the solid substrate. This physical picture is further compounded when wind of the Reynolds number greater than 100 blows over pinned drops, leading to the boundary layer separation and wake generation. In this Rapid Communication, we incorporate the well-developed ideas of the classical boundary layer to study partially wetting droplets in a wake created by a leader object. Depending on its distance from the leader, the droplet is observed to exhibit drafting, upstream motion, and splitting, due to the wake-induced hydrodynamic coupling that is analogous to drafting of moving bodies. We successfully rationalize the onset of the upstream motion regime using a reduced model that computes the droplet shape governed by the pressure field inside the wake.

  18. HIGH-SPEED, CLINICAL-SCALE MICROFLUIDIC GENERATION OF STABLE PHASE-CHANGE DROPLETS FOR GAS EMBOLOTHERAPY

    Science.gov (United States)

    Bardin, David; Martz, Thomas D.; Sheeran, Paul S.; Shih, Roger; Dayton, Paul A.; Lee, Abraham P.

    2013-01-01

    In this study we report on a microfluidic device and droplet formation regime capable of generating clinical-scale quantities of droplet emulsions suitable in size and functionality for in vivo therapeutics. By increasing the capillary number – based on the flow rate of the continuous outer phase – in our flow-focusing device, we examine three modes of droplet breakup: geometry-controlled, dripping, and jetting. Operation of our device in the dripping regime results in the generation of highly monodisperse liquid perfluoropentane droplets in the appropriate 3–6 µm range at rates exceeding 105 droplets per second. Based on experimental results relating droplet diameter and the ratio of the continuous and dispersed phase flow rates, we derive a power series equation, valid in the dripping regime, to predict droplet size by Dd ≅ 27(QC/QD)−5/12. The volatile droplets in this study are stable for weeks at room temperature yet undergo rapid liquid-to-gas phase transition, and volume expansion, above a uniform thermal activation threshold. The opportunity exists to potentiate locoregional cancer therapies such as thermal ablation and percutaneous ethanol injection using thermal or acoustic vaporization of these monodisperse phase-change droplets to intentionally occlude the vessels of a cancer. PMID:22011845

  19. Magnetic droplets and dynamical skyrmions

    Science.gov (United States)

    Akerman, Johan

    2015-03-01

    Nanocontact spin-torque oscillators (NC-STOs) provide an excellent environment for studying nano-magnetic phenomena such as localized and propagating auto-oscillatory spin wave (SW) modes. The recent experimental observation of magnetic droplet solitons in NC-STOs with perpendicular magnetic anisotropy (PMA) free layers, and the numerical and experimental demonstrations of spin transfer torque (STT) nucleated skyrmions in similar magnetic thin films add two interesting and useful nanoscale magnetic objects. Due to the competition between exchange, anisotropy, and, in the case of skyrmions, the Dzyaloshinskii-Moriya interaction (DMI), the droplet and the skyrmion are extremely compact, on the order of 10-100 nm. One of the main differences between a magnetic dissipative droplet soliton and a skyrmion is that the former is a dynamical object with all its spins precessing around an effective field and stabilized by STT, exchange, and PMA, while the latter has static spins and an internal structure stabilized by DMI, exchange, and PMA. The dissipative droplet is furthermore a non-topological soliton, while the skyrmion is topologically protected. In this work I will report on our most recent droplet experiments, including droplet collapse at very high fields, droplets excited in nano-wire based NC-STOs, and studies of the field-current droplet nucleation boundary. I will also demonstrate numerically and analytically that STT driven precession can stabilize so-called dynamical skyrmions even in the absence of DMI, and I will describe their very promising properties in detail. From a more fundamental perspective, precession is hence a third independent possibility to stabilize a skyrmion, without the need for the conventional stabilization from either dipolar energy or DMI.

  20. The energetics of bouncing droplets

    Science.gov (United States)

    Turton, Sam; Molacek, Jan; Bush, John

    2016-11-01

    We present the results of a theoretical investigation of the energetics of droplets bouncing on the surface of a vertically vibrating bath. We first assess the relative magnitudes of the kinetic, surface and gravitational potential energies of both the droplet and its wave field. We then seek to rationalize the transitions between the various bouncing and walking states that arise as the vibrational forcing is increased. Our results are compared with prior theoretical and experimental work.

  1. Modeling of air-droplet interaction, substrate melting and coating buildup in thermal spraying

    Science.gov (United States)

    Wei, Guanghua

    particle feeding velocity. In this thesis, the level set method is used to study the interaction between the droplet and the surrounding air. The level set function is used to track the deformation of the free surface. The capability of this model on accurately and efficiently simulating the droplet deformation and oscillation is demonstrated. The droplet deformation during in-flight caused by the air-droplet interaction and the droplet-substrate interaction are considered here. Particles with different surface tension and morphologies are studied as well. Droplet substrate interaction is studied to understand the substrate melting behavior. A numerical model is developed to investigate the droplet solidification, substrate melting and re-solidification. A dimensionless parameter, "temperature factor", is proposed from analysis and it can be used as an indicator to predict whether substrate melting will occur for a certain combination of the droplet and substrate. This parameter can be correlated with the maximum melting depth of the substrate. The possibility of heating up the substrate by plasma flame, and attaching a temperature-control device on the backside of the substrate to achieve substrate melting is studied. The substrate front surface temperature can be controlled at a sufficient high temperature. With additional heating from superheated molten droplets and the latent heat of droplet solidification, a thin liquid layer of the substrate can be obtained and epitaxy growth of the splats is possible. This could expand thermal spray technology to the applications of semiconductor and solar energy, both of which need epitaxy crystal with big sizes. To better control the existing thermal spray process, it is important to develop the quantitative relationships between spray parameters and coating characteristics. Until recently, the simulation studies have been focused on two-dimensional models and prediction of the cross-section structure of deposited layers; although

  2. Ice and water droplets on graphite: A comparison of quantum and classical simulations

    Energy Technology Data Exchange (ETDEWEB)

    Ramírez, Rafael, E-mail: ramirez@icmm.csic.es [Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Singh, Jayant K. [Eduard-Zintl-Institut für Anorganische und Physikalische Chemie and Center of Smart Interfaces, Technische Universität Darmstadt, Alarich-Weiss-Str. 4, 64287 Darmstadt (Germany); Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016 (India); Müller-Plathe, Florian; Böhm, Michael C. [Eduard-Zintl-Institut für Anorganische und Physikalische Chemie and Center of Smart Interfaces, Technische Universität Darmstadt, Alarich-Weiss-Str. 4, 64287 Darmstadt (Germany)

    2014-11-28

    Ice and water droplets on graphite have been studied by quantum path integral and classical molecular dynamics simulations. The point-charge q-TIP4P/F potential was used to model the interaction between flexible water molecules, while the water-graphite interaction was described by a Lennard-Jones potential previously used to reproduce the macroscopic contact angle of water droplets on graphite. Several energetic and structural properties of water droplets with sizes between 10{sup 2} and 10{sup 3} molecules were analyzed in a temperature interval of 50–350 K. The vibrational density of states of crystalline and amorphous ice drops was correlated to the one of ice Ih to assess the influence of the droplet interface and molecular disorder on the vibrational properties. The average distance of covalent OH bonds is found 0.01 Å larger in the quantum limit than in the classical one. The OO distances are elongated by 0.03 Å in the quantum simulations at 50 K. Bond distance fluctuations are large as a consequence of the zero-point vibrations. The analysis of the H-bond network shows that the liquid droplet is more structured in the classical limit than in the quantum case. The average kinetic and potential energy of the ice and water droplets on graphite has been compared with the values of ice Ih and liquid water as a function of temperature. The droplet kinetic energy shows a temperature dependence similar to the one of liquid water, without apparent discontinuity at temperatures where the droplet is solid. However, the droplet potential energy becomes significantly larger than the one of ice or water at the same temperature. In the quantum limit, the ice droplet is more expanded than in a classical description. Liquid droplets display identical density profiles and liquid-vapor interfaces in the quantum and classical limits. The value of the contact angle is not influenced by quantum effects. Contact angles of droplets decrease as the size of the water droplet

  3. Sequential microwave superheated water extraction of mannans from spent coffee grounds.

    Science.gov (United States)

    Passos, Cláudia P; Moreira, Ana S P; Domingues, M Rosário M; Evtuguin, Dmitry V; Coimbra, Manuel A

    2014-03-15

    The feasibility of using sequential microwave superheated water extraction (MAE) for the recovery of mannans from spent coffee grounds (SCG) was studied. Due to the high contents of mannose still present in the SCG residue left after two consecutive MAE, the unextracted material was re-suspended in water and submitted to a third microwave irradiation (MAE3) at 200 °C for 3 min. With MAE3, mannose recovery achieved 48%, increasing to 56% by MAE4, and reaching a maximum of 69% with MAE5. Glycosidic-linkage analysis showed that in MAE3 mainly galactomannans were recovered, while debranched galactomannans were recovered with MAE4 and MAE5. With increasing the number of extractions, the average degree of polymerization of the mannans decreased, as observed by size-exclusion chromatography and by methylation analysis. Scanning electron microscopy images showed a decrease on cell walls thickness. After final MAE5, the remaining un-extracted insoluble material, representing 22% of the initial SCG, was composed mainly by cellulose (84%).

  4. Modification of oil palm mesocarp fiber characteristics using superheated steam treatment.

    Science.gov (United States)

    Nordin, Noor Ida Amalina Ahamad; Ariffin, Hidayah; Andou, Yoshito; Hassan, Mohd Ali; Shirai, Yoshihito; Nishida, Haruo; Yunus, Wan Zin Wan; Karuppuchamy, Subbian; Ibrahim, Nor Azowa

    2013-07-30

    In this study, oil palm mesocarp fiber (OPMF) was treated with superheated steam (SHS) in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190-230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content (9%) compared to the untreated OPMF (33%). Improved thermal stability of OPMF was found after the SHS treatment. Moreover, SEM and ICP analyses of SHS-treated OPMF showed that silica bodies were removed from OPMF after the SHS treatment. XRD results exhibited that OPMF crystallinity increased after SHS treatment, indicating tougher fiber properties. Hemicellulose removal makes the fiber surface more hydrophobic, whereby silica removal increases the surface roughness of the fiber. Overall, the results obtained herewith suggested that SHS is an effective treatment method for surface modification and subsequently improving the characteristics of the natural fiber. Most importantly, the use of novel, eco-friendly SHS may contribute to the green and sustainable treatment for surface modification of natural fiber.

  5. Influence of Elemental Iron on Hydrogen Content in Superheated Aluminum-iron Melts

    Institute of Scientific and Technical Information of China (English)

    HU Li-na; BIAN Xiu-fang; ANANDA Mahto; DUAN You-feng

    2004-01-01

    The hydrogen content in liquid binary aluminum alloys with 1,3,5 and 8 wt% iron has been determined in the temperature range from 973K to 1103K.The hydrogen content in molten Al-Fe alloys increases remarkably when the temperature of the melt rises to about 1053K.This work indicates that the alloying element iron plays an important role in hydrogen content in superheated Al-Fe alloy melts below about 1053K.The results make it clear that the hydrogen content in the melt aluminum reduces with the increasing element levels.A conclusion is drawn that the degree of gassing in molten Al-Fe alloys is bound up with the properties of oxide film of aluminum alloy melts.The element iron has no effect on the compact structure of oxide film in aluminum melts.The effects of alloying element are theoretically analyzed in terms of Wagner interaction parameter.According to the values of the first order interaction parameter,it is concluded that the interaction between iron atom and aluminum is much stronger than that between hydrogen atom and aluminum,and the addition of the alloying element decreases the affinity of liquid aluminum for hydrogen.

  6. A neutron spectrometer based on temperature variations in superheated drop compositions

    Energy Technology Data Exchange (ETDEWEB)

    Apfel, Robert E. E-mail: robert.apfel@yale.edu; D' Errico, Francesco

    2002-01-01

    The response of superheated drop detectors (SDDs) to neutron radiation varies in a self-consistent manner with variations in temperature and pressure, making such compositions suitable for neutron spectrometry. The advantage of this approach is that the response functions of candidate materials versus energy as the temperature or pressure is varied are nested and have distinct thresholds, with no thermal neutron response. These characteristics permit unfolding without the uncertainties associated with other spectrometry techniques, where multiple solutions are possible, thus requiring an initial guess of the spectrum. A spectrometer was developed based on the well-established technology for acoustic sensing of bubble events interfaced with a proportional-integral-derivative temperature controller. The active monitor for neutrons, called REMbrandt{sup TM}, was used as the platform for controlling temperature on a SDD probe and for data acquisition, thereby automating the process of measuring the neutron energy spectrum. The new instrument, called REM-SPEC{sup TM}, implements and automates the original BINS approach: it adjusts the temperature of the SDD vial in increasing steps and measures the bubble event rate at each step. By using two distinct SDD materials with overlapping responses, the 0.1-20 MeV range of energies relevant to practical spectrometry is readily covered. Initial experiments with an Am-Be source validate the operational protocols of this device.

  7. Kinetics of the reaction between H{sup ·} and superheated water probed with muonium

    Energy Technology Data Exchange (ETDEWEB)

    Alcorn, Chris D. [Department of Chemistry and Biochemistry, Mount Allison University, Sackville, New Brunswick E4L 1G8 (Canada); Brodovitch, Jean-Claude [Department of Chemistry, Simon Fraser University, Burnaby, British Columbia V5A 1S6 (Canada); Percival, Paul W. [Department of Chemistry, Simon Fraser University, Burnaby, British Columbia V5A 1S6 (Canada); TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada); Smith, Marisa [Department of Chemistry and Biochemistry, Mount Allison University, Sackville, New Brunswick E4L 1G8 (Canada); Ghandi, Khashayar, E-mail: kghandi@mta.ca [Department of Chemistry and Biochemistry, Mount Allison University, Sackville, New Brunswick E4L 1G8 (Canada)

    2014-05-19

    Highlights: • Rate constants for reactions of H with water resolve a controversy. • H reacts with superheated water via two channels. • The findings have important implications for the safety of some nuclear power reactors. - Abstract: Safe operation of supercritical water-cooled reactors requires knowledge of the kinetics of transient species formed by the radiolysis of water in the range 300–650 °C. Using muonium, it is possible to study aqueous H{sup ·} atom chemistry over this temperature range. An important reaction to study is that of the H{sup ·} atom with water itself, because it is a potential source of molecular H{sub 2}. The concentration of H{sub 2} is important to plant coolant chemistry, as H{sub 2} is currently added to suppress oxidative corrosion in CANDU reactors. The reaction of muonium with H{sub 2}O and D{sub 2}O was studied experimentally up to 450 °C, and also via quantum chemical computations to investigate possible isotope effects. Our results suggest that although the H{sup ·} atom abstraction from H{sub 2}O is important at temperatures above 300 °C, the electron-producing channel (H{sup ·} + H{sub 2}O ⇌ H{sub 3}O{sup +} + e{sub aq}{sup -}) is significant at temperatures up to 300 °C, and becomes the dominant reaction channel at lower temperatures.

  8. Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment

    Directory of Open Access Journals (Sweden)

    Subbian Karuppuchamy

    2013-07-01

    Full Text Available In this study, oil palm mesocarp fiber (OPMF was treated with superheated steam (SHS in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190–230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content (9% compared to the untreated OPMF (33%. Improved thermal stability of OPMF was found after the SHS treatment. Moreover, SEM and ICP analyses of SHS-treated OPMF showed that silica bodies were removed from OPMF after the SHS treatment. XRD results exhibited that OPMF crystallinity increased after SHS treatment, indicating tougher fiber properties. Hemicellulose removal makes the fiber surface more hydrophobic, whereby silica removal increases the surface roughness of the fiber. Overall, the results obtained herewith suggested that SHS is an effective treatment method for surface modification and subsequently improving the characteristics of the natural fiber. Most importantly, the use of novel, eco-friendly SHS may contribute to the green and sustainable treatment for surface modification of natural fiber.

  9. Monte Carlo evaluation of the neutron detection efficiency of a superheated drop detector

    Energy Technology Data Exchange (ETDEWEB)

    Gualdrini, G.F. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dipt. Ambiente; D`Errico, F.; Noccioni, P. [Pisa, Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari

    1997-03-01

    Neuron dosimetry has recently gained renewed attention, following concerns on the exposure of crew members on board aircraft, and of workers around the increasing number of high energy accelerators for medical and research purpose. At the same time the new operational qualities for radiation dosimetry introduced by ICRU and the ICRP, aiming at a unified metrological system applicable to all types of radiation exposure, involved the need to update current devices in order to meet new requirements. Superheated Drop (Bubble) Detectors (SDD) offer an alternative approach to neutron radiation protection dosimetry. The SDDs are currently studied within a large collaborative effort involving Yale University. New Haven CT, Pisa (IT) University, the Physikalisch-Technische Bundesanstalt, Braunschweig D, and ENEA (Italian National Agency for new Technologies Energy and the Environment) Centre of Bologna. The detectors were characterised through calibrations with monoenergetic neutron beams and where experimental investigations were inadequate or impossible, such as in the intermediate energy range , parametric Monte Carlo calculations of the response were carried out. This report describes the general characteristic of the SDDs along with the Monte Carlo computations of the energy response and a comparison with the experimental results.

  10. Monte Carlo evaluation of the neutron detection efficiency of a superheated drop detector

    Energy Technology Data Exchange (ETDEWEB)

    Gualdrini, G. F. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dipt. Ambiente; D`Errico, F.; Noccioni, P. [Pisa, Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari

    1997-06-01

    Neutron dosimetry has recently gained renewed attention, following concerns on the exposure of crew members on board aircraft, and of workers around the increasing number of high energy accelerators for medical and research purposes. At the same time the new operational quantities for radiation dosimetry introduced by ICRU and the ICRP, aiming at a unified metrological system applicable to all types of radiation exposure, involved the need to update current devices in order to meet new requirements. Superheated Drop (Bubble) Detectors (SDD) offer an alternative approach to neutron radiation protection dosimetry. The SDDs are currently studied within a large collaborative effort involving Yale University, New Haven CT, the `Universita` degli Studi di Pisa`, the Physikalisch-Technische Bundesanstalt, Braunschweig D. and ENEA (National Agency for New Technology, Energy and the Environment)-C.R., Bologna. The detectors were characterised through calibrations with monoenergetic neutron beams and where experimental investigations were inadequate or impossible, such as in the intermediate energy range, parametric Monte Carlo calculations of the response were carried out. This report describes the general characteristics of the SDDs along with the Monte Carlo computations of the energy response and a comparison with the experimental results.

  11. Kinetics of Texture and Colour Changes in Chicken Sausage during Superheated Steam Cooking

    Directory of Open Access Journals (Sweden)

    Abdulhameed Asmaa A.

    2016-07-01

    Full Text Available The aim of this study was to develop a kinetic model to describe the texture and colour changes of chicken sausage during superheated steam cooking. Chicken sausages were cooked at temperature ranging from 150-200°C with treatment times ranging from 2-6 mins. The texture profile was evaluated in terms of hardness, cohesiveness, gumminess, and chewiness, while the colour parameters were estimated in terms of lightness (L*, redness (a*, yellowness (b*, and total colour difference (∆E. Experimental data showed a gradual reduction in texture parameters as cooking times and temperatures increased. The L* value of the colour showed a linear reduction with cooking condition, while the a*, b*, and ∆E values showed a contrary effects. The decrease in texture parameters and L*-value of colour parameter followed the first-order kinetic model. While, zero-order kinetic model was adapted to fit the a* and b*. The modified first order kinetic showed a good fit for total ∆E. Significant correlations between colour and texture parameters were observed, which showed that a* alone could be used to predict the texture of chicken sausage.

  12. Numerical simulation of convective evaporation of a droplet on a porous surface

    Science.gov (United States)

    Choi, Moonhyeok; Son, Gihun

    2016-11-01

    Numerical simulation is performed for droplet evaporation on a porous surface under an external flow condition. The droplet interface is tracked by a level-set (LS) method, which is modified to include the effects of porosity and evaporation coupled to heat and mass transfer. The conservation equations of mass, momentum, energy and vapor fraction for the external fluid region are combined with the local volume averaged conservation equations for the porous region through the matching conditions of velocity, pressure, temperature and vapor fraction at the fluid-solid interface. The temperature and the vapor fraction at the liquid-gas interface and the evaporation mass flux are simultaneously determined from the coupled equations for the mass and energy balances at the interface and the thermodynamic relation. The numerical simulation demonstrates the droplet penetration into the porous region and the evaporation to the porous and external flow regions. The effects of external flow velocity, porosity and porous particle size on the droplet deformation and evaporation are investigated. This research was supported by the Agency for Defense Development.

  13. Uniform-droplet spray forming

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States); Chun, Jung-Hoon [Massachusetts Institute of Technology, Cambridge, MA (United States); Ando, T. [Tufts Univ., Medford, MA (United States)

    1997-04-01

    The uniform-droplet process is a new method of liquid-metal atomization that results in single droplets that can be used to produce mono-size powders or sprayed-on to substrates to produce near-net shapes with tailored microstructure. The mono-sized powder-production capability of the uniform-droplet process also has the potential of permitting engineered powder blends to produce components of controlled porosity. Metal and alloy powders are commercially produced by at least three different methods: gas atomization, water atomization, and rotating disk. All three methods produce powders of a broad range in size with a very small yield of fine powders with single-sized droplets that can be used to produce mono-size powders or sprayed-on substrates to produce near-net shapes with tailored microstructures. The economical analysis has shown the process to have the potential of reducing capital cost by 50% and operating cost by 37.5% when applied to powder making. For the spray-forming process, a 25% savings is expected in both the capital and operating costs. The project is jointly carried out at Massachusetts Institute of Technology (MIT), Tuffs University, and Oak Ridge National Laboratory (ORNL). Preliminary interactions with both finished parts and powder producers have shown a strong interest in the uniform-droplet process. Systematic studies are being conducted to optimize the process parameters, understand the solidification of droplets and spray deposits, and develop a uniform-droplet-system (UDS) apparatus appropriate for processing engineering alloys.

  14. Modeling and measurement of boiling point elevation during water vaporization from aqueous urea for SCR applications

    Energy Technology Data Exchange (ETDEWEB)

    Dan, Ho Jin; Lee, Joon Sik [Seoul National University, Seoul (Korea, Republic of)

    2016-03-15

    Understanding of water vaporization is the first step to anticipate the conversion process of urea into ammonia in the exhaust stream. As aqueous urea is a mixture and the urea in the mixture acts as a non-volatile solute, its colligative properties should be considered during water vaporization. The elevation of boiling point for urea water solution is measured with respect to urea mole fraction. With the boiling-point elevation relation, a model for water vaporization is proposed underlining the correction of the heat of vaporization of water in the urea water mixture due to the enthalpy of urea dissolution in water. The model is verified by the experiments of water vaporization as well. Finally, the water vaporization model is applied to the water vaporization of aqueous urea droplets. It is shown that urea decomposition can begin before water evaporation finishes due to the boiling-point elevation.

  15. A Comprehensive Model of Electric-Field-Enhanced Jumping-Droplet Condensation on Superhydrophobic Surfaces.

    Science.gov (United States)

    Birbarah, Patrick; Li, Zhaoer; Pauls, Alexander; Miljkovic, Nenad

    2015-07-21

    Superhydrophobic micro/nanostructured surfaces for dropwise condensation have recently received significant attention due to their potential to enhance heat transfer performance by shedding positively charged water droplets via coalescence-induced droplet jumping at length scales below the capillary length and allowing the use of external electric fields to enhance droplet removal and heat transfer, in what has been termed electric-field-enhanced (EFE) jumping-droplet condensation. However, achieving optimal EFE conditions for enhanced heat transfer requires capturing the details of transport processes that is currently lacking. While a comprehensive model has been developed for condensation on micro/nanostructured surfaces, it cannot be applied for EFE condensation due to the dynamic droplet-vapor-electric field interactions. In this work, we developed a comprehensive physical model for EFE condensation on superhydrophobic surfaces by incorporating individual droplet motion, electrode geometry, jumping frequency, field strength, and condensate vapor-flow dynamics. As a first step toward our model, we simulated jumping droplet motion with no external electric field and validated our theoretical droplet trajectories to experimentally obtained trajectories, showing excellent temporal and spatial agreement. We then incorporated the external electric field into our model and considered the effects of jumping droplet size, electrode size and geometry, condensation heat flux, and droplet jumping direction. Our model suggests that smaller jumping droplet sizes and condensation heat fluxes require less work input to be removed by the external fields. Furthermore, the results suggest that EFE electrodes can be optimized such that the work input is minimized depending on the condensation heat flux. To analyze overall efficiency, we defined an incremental coefficient of performance and showed that it is very high (∼10(6)) for EFE condensation. We finally proposed mechanisms

  16. Influence of surface wettability on transport mechanisms governing water droplet evaporation.

    Science.gov (United States)

    Pan, Zhenhai; Weibel, Justin A; Garimella, Suresh V

    2014-08-19

    Prediction and manipulation of the evaporation of small droplets is a fundamental problem with importance in a variety of microfluidic, microfabrication, and biomedical applications. A vapor-diffusion-based model has been widely employed to predict the interfacial evaporation rate; however, its scope of applicability is limited due to incorporation of a number of simplifying assumptions of the physical behavior. Two key transport mechanisms besides vapor diffusion-evaporative cooling and natural convection in the surrounding gas-are investigated here as a function of the substrate wettability using an augmented droplet evaporation model. Three regimes are distinguished by the instantaneous contact angle (CA). In Regime I (CA ≲ 60°), the flat droplet shape results in a small thermal resistance between the liquid-vapor interface and substrate, which mitigates the effect of evaporative cooling; upward gas-phase natural convection enhances evaporation. In Regime II (60 ≲ CA ≲ 90°), evaporative cooling at the interface suppresses evaporation with increasing contact angle and counterbalances the gas-phase convection enhancement. Because effects of the evaporative cooling and gas-phase convection mechanisms largely neutralize each other, the vapor-diffusion-based model can predict the overall evaporation rates in this regime. In Regime III (CA ≳ 90°), evaporative cooling suppresses the evaporation rate significantly and reverses entirely the direction of natural convection induced by vapor concentration gradients in the gas phase. Delineation of these counteracting mechanisms reconciles previous debate (founded on single-surface experiments or models that consider only a subset of the governing transport mechanisms) regarding the applicability of the classic vapor-diffusion model. The vapor diffusion-based model cannot predict the local evaporation flux along the interface for high contact angle (CA ≥ 90°) when evaporative cooling is strong and the

  17. Droplet Motion on a Shape Gradient Surface.

    Science.gov (United States)

    Zheng, Yanfen; Cheng, Jiang; Zhou, Cailong; Xing, Haiting; Wen, Xiufang; Pi, Pihui; Xu, Shouping

    2017-05-02

    We demonstrate a facile method to induce water droplet motion on an wedge-shaped superhydrophobic copper surface combining with a poly(dimethylsiloxane) (PDMS) oil layer on it. The unbalanced interfacial tension from the shape gradient offers the actuating force. The superhydrophobicity critically eliminates the droplet contact line pinning and the slippery PDMS oil layer lubricates the droplet motion, which makes the droplet move easily. The maximum velocity and furthest position of droplet motion were recorded and found to be influenced by the gradient angle. The mechanism of droplet motion on the shape gradient surface is systematically discussed, and the theoretical model analysis is well matched with the experimental results.

  18. Superheated Steam Reasonable Application in the Papermaking Process%过热蒸气在造纸过程中的合理应用

    Institute of Scientific and Technical Information of China (English)

    刘建蒙; 陈巧花; 徐国华; 何小星

    2013-01-01

    文章以过热蒸气为对象,通过比较减温减压点不同,分析管径、壁厚、法兰、流速的变化,过热蒸气和饱和蒸气在运输过程中的能耗及运输管道成本.结果表明在输送过程中输送过热蒸气是最合理的,也是经济的.分析过热蒸气对钢材的强度、热膨胀、过度热应力的影响,说明过热蒸气影响设备安全性和寿命.%Superheated steam was taken as a research object, through analyzing the variety of pipe diameter, wall thickness, flange and flow changes under different temperature and pressure reduction, superheated steam and saturated steam were compared in energy consumption and piping costs during transportation process. The results show that superheated steam is the most reasonable, and also economical in the transportation process. Through analysis of superheated steam effecting on the strength steel, thermal expansion and excessive thermal stress, it illustrates that the superheated steam affects the equipment's safety and life.

  19. Walking droplets in linear channels

    Science.gov (United States)

    Filoux, Boris; Hubert, Maxime; Schlagheck, Peter; Vandewalle, Nicolas

    2017-01-01

    When a droplet is placed onto a vertically vibrated bath, it can bounce without coalescing. Upon an increase of the forcing acceleration, the droplet is propelled by the wave it generates and becomes a walker with a well-defined speed. We investigate the confinement of a walker in different rectangular cavities, used as waveguides for the Faraday waves emitted by successive droplet bounces. By studying the walker velocities, we discover that one-dimensional confinement is optimal for narrow channels of width of D ≃1.5 λF . Thereby, the walker follows a quasilinear path. We also propose an analogy with waveguide models based on the observation of the Faraday instability within the channels.

  20. Snell's law and walking droplets

    Science.gov (United States)

    Bush, John; Pucci, Giuseppe; Aubin, Benjamin; Brun, Pierre-Thomas; Faria, Luiz

    2016-11-01

    Droplets walking on the surface of a vibrating bath have been shown to exhibit a number of quantum-like features. We here present the results of a combined experimental and theoretical investigation of such droplets crossing a linear step corresponding to a reduction in bath depth. When the step is sufficiently large, the walker reflects off the step; otherwise, it is refracted as it crosses the step. Particular attention is given to an examination of the regime in which the droplet obeys a form of Snell's Law, a behavior captured in accompanying simulations. Attempts to provide theoretical rationale for the dependence of the effective refractive index on the system parameters are described. Supported by NSF through CMMI-1333242.

  1. Soft substrates suppress droplet splashing

    CERN Document Server

    Howland, Christopher J; Style, Robert W; Castrejón-Pita, A A

    2015-01-01

    Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. We show that substrate stiffness also impacts the splashing threshold by imaging ethanol drops impacting silicone gels of different stiffnesses. Splashing is significantly suppressed: droplets on the softest substrates need over 70% more kinetic energy to splash than they do on rigid substrates. We show that splash suppression is likely to be due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Youngs modulus $\\lesssim O(10^5)$Pa suppress splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention.

  2. Optical-cell evidence for superheated ice under gas-hydrate-forming conditions

    Science.gov (United States)

    Stern, L.A.; Hogenboom, D.L.; Durham, W.B.; Kirby, S.H.; Chou, I.-Ming

    1998-01-01

    We previously reported indirect but compelling evidence that fine-grained H2O ice under elevated CH4 gas pressure can persist to temperatures well above its ordinary melting point while slowly reacting to form methane clathrate hydrate. This phenomenon has now been visually verified by duplicating these experiments in an optical cell while observing the very slow hydrate-forming process as the reactants were warmed from 250 to 290 K at methane pressures of 23 to 30 MPa. Limited hydrate growth occurred rapidly after initial exposure of the methane gas to the ice grains at temperatures well within the ice subsolidus region. No evidence for continued growth of the hydrate phase was observed until samples were warmed above the equilibrium H2O melting curve. With continued heating, no bulk melting of the ice grains or free liquid water was detected anywhere within the optical cell until hydrate dissociation conditions were reached (292 K at 30 MPa), even though full conversion of the ice grains to hydrate requires 6-8 h at temperatures approaching 290 K. In a separate experimental sequence, unreacted portions of H2O ice grains that had persisted to temperatures above their ordinary melting point were successfully induced to melt, without dissociating the coexisting hydrate in the sample tube, by reducing the pressure overstep of the equilibrium phase boundary and thereby reducing the rate of hydrate growth at the ice-hydrate interface. Results from similar tests using CO2 as the hydrate-forming species demonstrated that this superheating effect is not unique to the CH4-H2O system.

  3. Pengembangan Proses Produksi Biodiesel Biji Karet Metode Non-Katalis Superheated Methanol pada Tekanan Atmosfir

    Directory of Open Access Journals (Sweden)

    I Wayan Susila

    2009-01-01

    Full Text Available The process of biodiesel production from rubber seed (hevea brasiliensis is conducted in Indonesia in general using catalyst (acid or alkaline and wet washing method or dry washing method. Catalyst method brings many weaknesses include: a long production time, high production costs due to wear or magnesol as a catalyst absorban, especially if the purification uses water (wet wash system because it will be harmful to engine components such as: seal leaks quickly, easily arise fungus, rust/corrosion on the cylinder heads, pumps and fuel filters are often clogged, etc. Biodiesel production process with non-catalytic method can overcome the weaknesses mentioned above. In this study, rubber seed oil is obtained by the method of pressing.The oil specifications are as follow: viscosity 5.19 cSt, density 0.9209 g/ml, water content 0.2%, free fatty acid (FFA 6.66%, and the boiling point 305 oC.The methodology used is processing rubber seed into biodiesel with superheated methanol non-catalyst method. Transesterification performed in a Bubble Column Reactor (BCR at the reaction temperature 270oC, 275oC, 280oC, 285oC, and 290 oC and held at atmospheric pressure. The molar ratio of methanol and rubber seed oil were: 140, 150, and 160. The results showed that the process of making biodiesel from vegetable oil catalyst method is usually carried out through the various stages of the process e.g: degumming process to remove mucus or sap it contains, esterification to reduce the FFA content to below 2,5% to prevent saponification, and tranesterification to obtain methyl esters or biodiesel and then washing. But in its development by using non-catalytic method turns out that the rubber seed oil has a high FFA content (above 2.5% can be directly processed tranesterification without any saponification formed and can produce biodiesel without having to experience the process of degumming, esterification and washing. The density, cetane number, pour point, flash

  4. Evaporation of elongated droplets on chemically stripe-patterned surfaces

    NARCIS (Netherlands)

    Jansen, H.P.; Zandvliet, H.J.W.; Kooij, E.S.

    2015-01-01

    We investigate the evaporation of elongated droplets on chemically striped patterned surfaces. Variation of elongation is achieved by depositing droplets on surfaces with varying ratios of hydrophobic and hydrophilic stripe widths. Elongated droplets evaporate faster than more spherical droplets. Bo

  5. Investigations of structural transformation within metal (austenite chromium-manganese steel) at the external surface of steam superheating tubes

    Science.gov (United States)

    Bogachev, V. A.; Pshechenkova, T. P.; Shumovskaya, M. A.

    2016-04-01

    The elemental composition of an altered layer at the external surface of a steam superheating tube of grade DI59 steel is investigated after long-term operation. It is shown that the layer is located between a scale and a matrix and depleted by silicon, manganese, copper, and chromium with the maximum oxidizer affinity, enriched by iron and nickel to 90%, and mainly composed of the α-Fe phase (ferrite) with the ferromagnetic properties. The layer formed as a result of selective oxidation and diffusion from the matrix into the metal scale with the less standard free energy of the formation of sulfides and oxides. A magnetic ferrite meter is used in the experimental investigation of the layer evolution by testing grade DI59 steel for heat resistance in air environment at temperatures of 585, 650, and 700°C for 15 × 103 h; creep at a temperature of 750°C and a stress of 60 MPa; and long-term strength at temperatures of 700 and 750°C and stresses of from 30 to 80 MPa. Specimens for tests are made of tubes under as-received conditions. The relationship between the ferrite phase content in the surface metal layer and the temperature and time of test is determined. The dependence is developed to evaluate the equivalent temperature for operation of the external surface of steam superheating tubes using data of magnetic ferritometry. It is shown that operation temperatures that are determined by the ferrite phase content and the σ phase concentration in the metal structure of steam superheating tubes with the significant operating time are close. It is proposed to use magnetic ferritometry for revelation of thermal nonuniformity and worst tubes of steam superheaters of HPP boilers.

  6. Droplet migration characteristics in confined oscillatory microflows

    CERN Document Server

    Chaudhury, Kaustav; Chakraborty, Suman

    2015-01-01

    We analyze the migration characteristics of a droplet in an oscillatory flow field in a parallel plate micro-confinement. Using phase filed formalism, we capture the dynamical evolution of the droplet over a wide range of the frequency of the imposed oscillation in the flow field, drop size relative to the channel gap, and the capillary number. The latter two factors imply the contribution of droplet deformability, commonly considered in the study of droplet migration under steady shear flow conditions. We show that the imposed oscillation brings in additional time complexity in the droplet movement, realized through temporally varying drop-shape, flow direction and the inertial response of the droplet. As a consequence, we observe a spatially complicated pathway of the droplet along the transverse direction, in sharp contrast to the smooth migration under a similar yet steady shear flow condition. Intuitively, the longitudinal component of the droplet movement is in tandem with the flow continuity and evolve...

  7. Materials science: Droplets leap into action

    Science.gov (United States)

    Vollmer, Doris; Butt, Hans-Jürgen

    2015-11-01

    What could cause a water droplet to start bouncing on a surface? It seems that a combination of evaporation and a highly water-repellent surface induces droplet bouncing when ambient pressure is reduced. See Letter p.82

  8. Application of the BINS superheated drop detector spectrometer to the {sup 9}Be(p,xn) neutron energy spectrum determination

    Energy Technology Data Exchange (ETDEWEB)

    Di Fulvio, A.; Ciolini, R.; Mirzajani, N.; Romei, C.; D' Errico, F. [Dipartimento di Ingegneria Meccanica, Nucleare e della Produzione, Universita di Pisa, Pisa (Italy); Bedogni, R. [INFN, Laboratori Nazionali di Frascati, Frascati (Roma) (Italy); Esposito, J.; Zafiropoulos, D.; Colautti, P. [INFN, Laboratori Nazionali di Legnaro, Legnaro (Padova) (Italy)

    2013-07-18

    In the framework of TRASCO-BNCT project, a Bubble Interactive Neutron Spectrometer (BINS) device was applied to the characterization of the angle-and energy-differential neutron spectra generated by the {sup 9}Be(p,xn)reaction. The BINS spectrometer uses two superheated emulsion detectors, sequentially operated at different temperatures and thus provides a series of six sharp threshold responses, covering the 0.1-10 MeV neutron energy range. Spectrum unfolding of the data was performed by means of MAXED code. The obtained angle, energy-differential spectra were compared with those measured with a Bonner sphere spectrometer, a silicon telescope spectrometer and literature data.

  9. Microwave-Assisted Superheating and/or Microwave-Specific Superboiling (Nucleation-Limited Boiling of Liquids Occurs under Certain Conditions but is Mitigated by Stirring

    Directory of Open Access Journals (Sweden)

    Anthony Ferrari

    2015-12-01

    Full Text Available Temporary superheating and sustained nucleation-limited “superboiling” of unstirred liquids above the normal atmospheric boiling point have been documented during microwave heating. These phenomena are reliably observed under prescribed conditions, although the duration (of superheating and magnitude (of superheating and superboiling vary according to system parameters such as volume of the liquid and the size and shape of the vessel. Both phenomena are mitigated by rapid stirring with an appropriate stir bar and/or with the addition of boiling chips, which provide nucleation sites to support the phase-change from liquid to gas. With proper experimental design and especially proper stirring, the measured temperature of typical organic reaction mixtures heated at reflux will be close to the normal boiling point temperature of the solvent, whether heated using microwave radiation or conventional convective heat transfer. These observations are important to take into consideration when comparing reaction rates under conventional and microwave heating.

  10. Mechanical vibrations of pendant liquid droplets

    OpenAIRE

    Temperton, Robert H.; Smith, Michael I.; Sharp, James S.

    2015-01-01

    A simple optical deflection technique was used to monitor the vibrations of microlitre pendant droplets of deuterium oxide, formamide, and 1,1,2,2-tetrabromoethane. Droplets of different volumes of each liquid were suspended from the end of a microlitre pipette and vibrated using a small puff of nitrogen gas. A laser was passed through the droplets and the scattered light was collected using a photodiode. Vibration of the droplets resulted in the motion of the scattered beam and time-dependen...

  11. Dynamics of Droplet Motion under Electrowetting Actuation

    OpenAIRE

    Annapragada, S. Ravi; Dash, Susmita; Garimella, Suresh V.; Murthy, Jayathi Y.

    2011-01-01

    The static shape of droplets under electrowetting actuation is well understood. The steady-state shape of the droplet is obtained on the basis of the balance of surface tension and electrowetting forces, and the change in the apparent contact angle is well characterized by the Young-Lippmann equation However, the transient droplet shape behavior when a voltage is suddenly applied across a droplet has received less attention. Additional dynamic frictional forces are at play during this transie...

  12. Study of Interfacial Mass Transfer on Vapor Bubbles in Microgravity

    Directory of Open Access Journals (Sweden)

    Johannes Straub

    2005-03-01

    Full Text Available The knowledge of interfacial heat and mass transfer is important for environmental and technical applications, especially nowadays for numerical simulations of two phase problems. However, the data available up to now are inconsistent, because most experiments performed on earth suffer under buoyancy and convection, and thus the boundary conditions at the evaluation could not clearly be defined. Therefore, we seized the opportunity to investigate interfacial heat and mass transfer in microgravity environment. In these experiments the growth and collapse in the overall superheated and subcooled bubles, respectively, liquid or free vapor bubbles were observed at various liquid temperature and pressure states and over periods of from a few seconds up to 300 seconds. It was for the first time that such very long periods of bubble growth could be observed. The experimental set-up allowed the control of the liquid supersaturation before the bubbles were initiated by a short heat pulse at a miniaturized heater. Therefore it was possible to perform a systematic parametric study. The measured curves for vapor bubble growth are in good agreement with our numerical simulation. Based on this model the kinetic coefficients for the evaporation and condensation according to Hertz-Knudsen have been derived from the experimental data.

  13. Droplet centrifugation, droplet DNA extraction, and rapid droplet thermocycling for simpler and faster PCR assay using wire-guided manipulations

    Directory of Open Access Journals (Sweden)

    You David J

    2012-09-01

    Full Text Available Abstract A computer numerical control (CNC apparatus was used to perform droplet centrifugation, droplet DNA extraction, and rapid droplet thermocycling on a single superhydrophobic surface and a multi-chambered PCB heater. Droplets were manipulated using “wire-guided” method (a pipette tip was used in this study. This methodology can be easily adapted to existing commercial robotic pipetting system, while demonstrated added capabilities such as vibrational mixing, high-speed centrifuging of droplets, simple DNA extraction utilizing the hydrophobicity difference between the tip and the superhydrophobic surface, and rapid thermocycling with a moving droplet, all with wire-guided droplet manipulations on a superhydrophobic surface and a multi-chambered PCB heater (i.e., not on a 96-well plate. Serial dilutions were demonstrated for diluting sample matrix. Centrifuging was demonstrated by rotating a 10 μL droplet at 2300 round per minute, concentrating E. coli by more than 3-fold within 3 min. DNA extraction was demonstrated from E. coli sample utilizing the disposable pipette tip to cleverly attract the extracted DNA from the droplet residing on a superhydrophobic surface, which took less than 10 min. Following extraction, the 1500 bp sequence of Peptidase D from E. coli was amplified using rapid droplet thermocycling, which took 10 min for 30 cycles. The total assay time was 23 min, including droplet centrifugation, droplet DNA extraction and rapid droplet thermocycling. Evaporation from of 10 μL droplets was not significant during these procedures, since the longest time exposure to air and the vibrations was less than 5 min (during DNA extraction. The results of these sequentially executed processes were analyzed using gel electrophoresis. Thus, this work demonstrates the adaptability of the system to replace many common laboratory tasks on a single platform (through re-programmability, in rapid succession (using droplets

  14. Floating Droplet Array: An Ultrahigh-Throughput Device for Droplet Trapping, Real-time Analysisand Recovery

    Directory of Open Access Journals (Sweden)

    Louai Labanieh

    2015-09-01

    Full Text Available We describe the design, fabrication and use of a dual-layered microfluidic device for ultrahigh-throughput droplet trapping, analysis, and recovery using droplet buoyancy. To demonstrate the utility of this device for digital quantification of analytes, we quantify the number of droplets, which contain a β-galactosidase-conjugated bead among more than 100,000 immobilized droplets. In addition, we demonstrate that this device can be used for droplet clustering and real-time analysis by clustering several droplets together into microwells and monitoring diffusion of fluorescein, a product of the enzymatic reaction of β-galactosidase and its fluorogenic substrate FDG, between droplets.

  15. Sophisticated compound droplets on fiber networks

    Science.gov (United States)

    Weyer, Floriane; Lismont, Marjorie; Dreesen, Laurent; Vandewalle, Nicolas

    2015-11-01

    Droplets on fibers are part of our everyday lives. Indeed, many phenomena involve drops and fibers such as the formation of dew droplets on a spiderweb, the trapping of water droplets on cactus spines or the dyeing of cotton or wool fibers. Therefore, this topic has been widely studied in the recent years and it appears that droplets on fibers can be the starting point for an open digital microfluidics. We study the behavior of soapy water droplets on a fiber array. When a droplet slides along a vertical fiber and encounters a horizontal fiber, it can either stick there or continue its way. In the latter case, the droplet releases a tiny residue. We study the volume of these residues depending on the geometry of the node. By using this technique, a large number of small droplets can be trapped at the nodes of a fiber array. These residues can be encapsulated and collected by an oil droplet in order to create a multicompound droplet. Moreover, by using optical fibers, we can provoke and detect the fluorescence of the inner droplets. Fibers provide therefore an original way to study compound droplets and multiple reactions. F. Weyer is financially supported by an FNRS grant. This work is also supported by the FRFC 2.4504.12.

  16. Droplet size influences division of mammalian cell factories in droplet microfluidic cultivation

    DEFF Research Database (Denmark)

    Periyannan Rajeswari, Prem Kumar; Joensson, Haakan N.; Svahn, Helene Andersson

    2017-01-01

    The potential of using droplet microfluidics for screening mammalian cell factories has been limited by the difficulty in achieving continuous cell division during cultivation in droplets. Here, we report the influence of droplet size on mammalian cell division and viability during cultivation...... in droplets. Chinese Hamster Ovary (CHO) cells, the most widely used mammalian host cells for biopharmaceuticals production were encapsulated and cultivated in 33, 180 and 320 pL droplets for 3 days. Periodic monitoring of the droplets during incubation showed that the cell divisions in 33 pL droplets stopped...... after 24 h, whereas continuous cell division was observed in 180 and 320 pL droplets for 72 h. The viability of the cells cultivated in the 33 pL droplets also dropped to about 50% in 72 h. In contrast, the viability of the cells in the larger droplets was above 90% even after 72 h of cultivation...

  17. Intensive evaporation and boiling of a heterogeneous liquid droplet with an explosive disintegration in high-temperature gas area

    Directory of Open Access Journals (Sweden)

    Piskunov Maxim V.

    2016-01-01

    Full Text Available The using of the high-speed (not less than 105 frames per second video recording tools (“Phantom” and the software package ("TEMA Automotive" allowed carrying out an experimental research of laws of intensive vaporization with an explosive disintegration of heterogeneous (with a single solid nontransparent inclusion liquid droplet (by the example of water in high-temperature (500-800 K gases (combustion products. Times of the processes under consideration and stages (liquid heat-up, evaporation from an external surface, bubble boiling at internal interfaces, growth of bubble sizes, explosive droplet breakup were established. Necessary conditions of an explosive vaporization of a heterogeneous droplet were found out. Mechanisms of this process and an influence of properties of liquid and inclusion material on them were determined.

  18. Droplet based cavities and lasers

    DEFF Research Database (Denmark)

    Mølhave, Kristian; Kristensen, Anders; Mortensen, Asger

    2009-01-01

    The self-organized and molecularly smooth surface on liquid microdroplets makes them attractive as optical cavities with very high quality factors. This chapter describes the basic theory of optical modes in spherical droplets. The mechanical properties including vibrational excitation are also d...

  19. Droplets, Bubbles and Ultrasound Interactions

    NARCIS (Netherlands)

    Shpak, O.; Verweij, M.; Jong, de N.; Versluis, M.; Escoffre, J.M.; Bouakaz, A.

    2016-01-01

    The interaction of droplets and bubbles with ultrasound has been studied extensively in the last 25 years. Microbubbles are broadly used in diagnostic and therapeutic medical applications, for instance, as ultrasound contrast agents. They have a similar size as red blood cells, and thus are able to

  20. Salt stains from evaporating droplets

    NARCIS (Netherlands)

    Shahidzadeh, N.; Schut, M.F.L.; Desarnaud, J.; Prat, M.; Bonn, D.

    2015-01-01

    The study of the behavior of sessile droplets on solid substrates is not only associated with common everyday phenomena, such as the coffee stain effect, limescale deposits on our bathroom walls, but also very important in many applications such as purification of pharmaceuticals, deicing of

  1. Salt stains from evaporating droplets

    NARCIS (Netherlands)

    Shahidzadeh, N.; Schut, M.F.L.; Desarnaud, J.; Prat, M.; Bonn, D.

    2015-01-01

    The study of the behavior of sessile droplets on solid substrates is not only associated with common everyday phenomena, such as the coffee stain effect, limescale deposits on our bathroom walls, but also very important in many applications such as purification of pharmaceuticals, deicing of airplan

  2. Shock wave-droplet interaction

    Science.gov (United States)

    Habibi Khoshmehr, Hamed; Krechetnikov, Rouslan

    2016-11-01

    Disintegration of a liquid droplet under the action of a shock wave is experimentally investigated. The shock wave-pulse is electromagnetically generated by discharging a high voltage capacitor into a flat spiral coil, above which an isolated circular metal membrane is placed in a close proximity. The Lorentz force arising due to the eddy current induced in the membrane abruptly accelerates it away from the spiral coil thus generating a shock wave. The liquid droplet placed at the center of the membrane, where the maximum deflection occurs, is disintegrated in the process of interaction with the shock wave. The effects of droplet viscosity and surface tension on the droplet destruction are studied with high-speed photography. Water-glycerol solution at different concentrations is used for investigating the effect of viscosity and various concentrations of water-sugar and water-ethanol solution are used for studying the effect of surface tension. Here we report on how the metamorphoses, which a liquid drop undergoes in the process of interaction with a shock wave, are affected by varied viscosity and surface tension.

  3. Analysis of experimental data for the nucleation rate of water droplets

    Science.gov (United States)

    Kashchiev, Dimo

    2006-07-01

    A formula for the stationary nucleation rate J is proposed and used for analysis of experimental data for the dependence of J on the supersaturation ratio S in isothermal homogeneous nucleation of water droplets in vapors. It is found that the experimental data are described quite successfully by the proposed formula which is based on (i) the Gibbs presentation of the nucleation work in terms of overpressure, (ii) the Girshick-Chiu [J. Chem. Phys. 93, 1273 (1990); 94, 826 (1991)] self-consistency correction to the equilibrium cluster size distribution, and (iii) the Reguera-Rubi [J. Chem. Phys. 115, 7100 (2001)] kinetic accounting of the nucleus translational-rotational motion. The formula, like that of Wölk and Strey [J. Phys. Chem. B 105, 11683 (2001)], could be used as a semiempirical relation describing the J(S ) dependence for nucleation in vapors of single-component droplets or crystals of substances with insufficiently well known equations of state.

  4. Parameter passing between molecular dynamics and continuum models for droplets on solid substrates: the static case.

    Science.gov (United States)

    Tretyakov, Nikita; Müller, Marcus; Todorova, Desislava; Thiele, Uwe

    2013-02-14

    We study equilibrium properties of polymer films and droplets on a solid substrate employing particle-based simulation techniques (molecular dynamics) and a continuum description. Parameter-passing techniques are explored that facilitate a detailed comparison of the two models. In particular, the liquid-vapor, solid-liquid, and solid-vapor interface tensions, and the Derjaguin or disjoining pressure are determined by molecular dynamics simulations. This information is then introduced into continuum descriptions accounting for (i) the full curvature and (ii) a long-wave approximation of the curvature (thin film model). A comparison of the dependence of the contact angle on droplet size indicates that the theories agree well if the contact angles are defined in a compatible manner.

  5. Lattice Boltzmann simulation of droplet formation in T-junction geometries

    Science.gov (United States)

    Busuioc, Sergiu; Ambruş, Victor E.; Sofonea, Victor

    2017-01-01

    The formation of droplets in T-junction configurations is investigated using a two-dimensional Lattice Boltzmann model for liquid-vapor systems. We use an expansion of the equilibrium distribution function with respect to Hermite polynomials and an off-lattice velocity set. To evolve the distribution functions we use the second order corner transport upwind numerical scheme and a third order scheme is used to compute the gradient operators in the force term. The droplet formation successfully recovers the squeezing, dripping and jetting regimes. We find that the droplet length decreases proportionally with the flow rate of the continuous phase and increases with the flow rate of the dispersed phase in all simulation configurations and has a linear dependency on the surface tension parameter κ.

  6. The contact angle for a droplet on homogeneous and spherical concave surfaces

    Science.gov (United States)

    Hu, Ai-Jun; Lv, Bao-Zhan; Wang, Xiao-Song; Zhou, Long

    2016-03-01

    Wetting of droplets on homogeneous and spherical concave rough surfaces is investigated based on thermodynamics. In this study, neglecting the droplet gravity and the thickness of the precursor film of the liquid-vapor interface, the three-phase system is divided into six parts using Gibbs concept of dividing surface. The system Helmholtz free energy is established based on thermodynamics. Supposing the temperature and chemical potential to be constant, a new generalized Young’s equation of the equilibrium contact angle for a spherical droplet on a spherical concave rough surfaces is obtained including the line tension effects. Under certain conditions, this generalized Young’s equation is the same as the Rusanov’s equation.

  7. Droplet size distribution in homogeneous isotropic turbulence

    Science.gov (United States)

    Perlekar, Prasad; Biferale, Luca; Sbragaglia, Mauro; Srivastava, Sudhir; Toschi, Federico

    2012-06-01

    We study the physics of droplet breakup in a statistically stationary homogeneous and isotropic turbulent flow by means of high resolution numerical investigations based on the multicomponent lattice Boltzmann method. We verified the validity of the criterion proposed by Hinze [AIChE J. 1, 289 (1955)] for droplet breakup and we measured the full probability distribution function of droplets radii at different Reynolds numbers and for different volume fractions. By means of a Lagrangian tracking we could follow individual droplets along their trajectories, define a local Weber number based on the velocity gradients, and study its cross-correlation with droplet deformation.

  8. Use of levitating liquid micro-droplets as tracers to study the evaporation in the vicinity of the contact line

    Directory of Open Access Journals (Sweden)

    Zaitsev Dmitry

    2017-01-01

    Full Text Available Self-organization of a cloud of liquid micro-droplets into an ordered two-dimensional array, levitating over a heated layer of liquid due to upward vapor flow, has been observed in several recent experimental works. In the present paper, the levitating micro-droplet array is studied under the condition when the liquid layer ruptures and a dry spot form on the heater. It has been found, that when the levitating micro-droplets are moving from wetted heater area to dry heater area and passing over the contact line, the micro-droplets levitation height is drastically increased, which is indicative of the intensive evaporation occurring in the region of the contact line.

  9. Dynamics of droplet motion under electrowetting actuation.

    Science.gov (United States)

    Annapragada, S Ravi; Dash, Susmita; Garimella, Suresh V; Murthy, Jayathi Y

    2011-07-05

    The static shape of droplets under electrowetting actuation is well understood. The steady-state shape of the droplet is obtained on the basis of the balance of surface tension and electrowetting forces, and the change in the apparent contact angle is well characterized by the Young-Lippmann equation. However, the transient droplet shape behavior when a voltage is suddenly applied across a droplet has received less attention. Additional dynamic frictional forces are at play during this transient process. We present a model to predict this transient behavior of the droplet shape under electrowetting actuation. The droplet shape is modeled using the volume of fluid method. The electrowetting and dynamic frictional forces are included as an effective dynamic contact angle through a force balance at the contact line. The model is used to predict the transient behavior of water droplets on smooth hydrophobic surfaces under electrowetting actuation. The predictions of the transient behavior of droplet shape and contact radius are in excellent agreement with our experimental measurements. The internal fluid motion is explained, and the droplet motion is shown to initiate from the contact line. An approximate mathematical model is also developed to understand the physics of the droplet motion and to describe the overall droplet motion and the contact line velocities.

  10. Thermophoresis of water droplets inside carbon nanotubes

    Science.gov (United States)

    Zambrano, Harvey; Walther, Jh; Oyarzua, Elton; Rojano, Andres

    2016-11-01

    Carbon Nanotubes (CNTs) offer unique possibilities as fluid conduits with applications ranging from lab on a chip devices to encapsulation media for drug delivery. CNTs feature high mechanical strength, chemical and thermal stability and biocompatibility therefore they are promising candidates for nanodevice fabrication. Thermal gradients have been proposed as mechanism to drive particles, fullerenes and droplets inside CNTs. Here, by conducting Molecular Dynamics (MD) simulations, we study thermophoresis of water droplets inside CNTs. We systematically change the size of the droplets, the axial thermal gradient and CNT chirality. We find that the droplet motion in the armchair CNTs exhibits two clearly delimited stages, a regime wherein the droplet is accelerated and subsequently, a regime wherein the droplet moves with constant velocity. Inside the zig zag CNTs, the droplet accelerates during a very short time and then it moves with constant velocity. We compute the net force during the droplet acceleration and find a correlation between the droplet acceleration and the magnitude of the thermal gradient without any dependence on the droplet size. Moreover, we conduct velocity constrained MD simulations to determine the friction and thermophoretic forces acting on the droplet. We acknowledge partial funding from FONDECYT through the Project No. 11130559 and from VRID Universidad de Concepcion.

  11. Volatility of methylglyoxal cloud SOA formed through OH radical oxidation and droplet evaporation

    Science.gov (United States)

    Ortiz-Montalvo, Diana L.; Schwier, Allison N.; Lim, Yong B.; McNeill, V. Faye; Turpin, Barbara J.

    2016-04-01

    The volatility of secondary organic aerosol (SOA) formed through cloud processing (aqueous hydroxyl radical (radOH) oxidation and droplet evaporation) of methylglyoxal (MGly) was studied. Effective vapor pressure and effective enthalpy of vaporization (ΔHvap,eff) were determined using 1) droplets containing MGly and its oxidation products, 2) a Vibrating Orifice Aerosol Generator (VOAG) system, and 3) Temperature Programmed Desorption Aerosol-Chemical Ionization Mass Spectrometry (TPD Aerosol-CIMS). Simulated in-cloud MGly oxidation (for 10-30 min) produces an organic mixture of higher and lower volatility components with an overall effective vapor pressure of (4 ± 7) × 10-7 atm at pH 3. The effective vapor pressure decreases by a factor of 2 with addition of ammonium hydroxide (pH 7). The fraction of organic material remaining in the particle-phase after drying was smaller than for similar experiments with glycolaldehyde and glyoxal SOA. The ΔHvap,eff of pyruvic acid and oxalic acid + methylglyoxal in the mixture (from TPD Aerosol-CIMS) were smaller than the theoretical enthalpies of the pure compounds and smaller than that estimated for the entire precursor/product mix after droplet evaporation. After 10-30 min of aqueous oxidation (one cloud cycle) the majority of the MGly + radOH precursor/product mix (even neutralized) will volatilize during droplet evaporation; neutralization and at least 80 min of oxidation at 10-12 M radOH (or >12 h at 10-14 M) is needed before low volatility ammonium oxalate exceeds pyruvate.

  12. Fourier-Transform Infrared Absorption Spectroscopy in Binary Hydrocarbon-Alcohol Single Droplet Evaporation

    OpenAIRE

    Daly, Shane R.; Nicholas Olson; Hagen, Christopher L.

    2016-01-01

    Broadband absorption spectroscopy, by way of FTIR, was used to investigate the vapor cloud of a single millimeter sized liquid droplet suspended by a syringe as it evaporates at standard conditions. Single beam data were collected every 8 seconds resulting in a time-resolved record. Species concentrations were tracked using their resonant absorption peaks and correlated with a multidimensional numerical model. The numerical model combined a Gaussian beam transmission through a temporally chan...

  13. Droplet lasers: a review of current progress

    Science.gov (United States)

    McGloin, D.

    2017-05-01

    It is perhaps surprising that something as fragile as a microscopic droplet could possibly form a laser. In this article we will review some of the underpinning physics as to how this might be possible, and then examine the state of the art in the field. The technology to create and manipulate droplets will be examined, as will the different classes of droplet lasers. We discuss the rapidly developing fields of droplet biolasers, liquid crystal laser droplets and explore how droplet lasers could give rise to new bio and chemical sensing and analysis. The challenges that droplet lasers face in becoming robust devices, either as sensors or as photonic components in the lab on chip devices, is assessed.

  14. Enhanced Droplet Control by Transition Boiling

    Science.gov (United States)

    Grounds, Alex; Still, Richard; Takashina, Kei

    2012-10-01

    A droplet of water on a heated surface can levitate over a film of gas produced by its own evaporation in the Leidenfrost effect. When the surface is prepared with ratchet-like saw-teeth topography, these droplets can self-propel and can even climb uphill. However, the extent to which the droplets can be controlled is limited by the physics of the Leidenfrost effect. Here, we show that transition boiling can be induced even at very high surface temperatures and provide additional control over the droplets. Ratchets with acute protrusions enable droplets to climb steeper inclines while ratchets with sub-structures enable their direction of motion to be controlled by varying the temperature of the surface. The droplets' departure from the Leidenfrost regime is assessed by analysing the sound produced by their boiling. We anticipate these techniques will enable the development of more sophisticated methods for controlling small droplets and heat transfer.

  15. Uptake of water droplets by nonwetting capillaries

    CERN Document Server

    Willmott, Geoff R; Hendy, Shaun C

    2010-01-01

    We present direct experimental evidence that water droplets can spontaneously penetrate non-wetting capillaries, driven by the action of Laplace pressure due to high droplet curvature. Using high-speed optical imaging, microcapillaries of radius 50 to 150 micron, and water microdroplets of average radius between 100 and 1900 micron, we demonstrate that there is a critical droplet radius below which water droplets can be taken up by hydrophobised glass and polytetrafluoroethylene (PTFE) capillaries. The rate of capillary uptake is shown to depend strongly on droplet size, with smaller droplets being absorbed more quickly. Droplet size is also shown to influence meniscus motion in a pre-filled non-wetting capillary, and quantitative measurements of this effect result in a derived water-PTFE static contact angle between 96 degrees and 114 degrees. Our measurements confirm recent theoretical predictions and simulations for metal nanodroplets penetrating carbon nanotubes (CNTs). The results are relevant to a wide ...

  16. Study on the effect of subcooling on vapor film collapse on high temperature particle surface

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Yutaka; Tochio, Daisuke; Yanagida, Hiroshi [Department of Mechanical Systems Engineering, Yamagata Univ., Yonezawa, Yamagata (Japan)

    2000-11-01

    Thermal detonation model is proposed to describe vapor explosion. According to this model, vapor film on pre-mixed high temperature droplet surface is needed to be collapsed for the trigger of the vapor explosion. It is pointed out that the vapor film collapse behavior is significantly affected by the subcooling of low temperature liquid. However, the effect of subcooling on micro-mechanism of vapor film collapse behavior is not experimentally well identified. The objective of the present research is to experimentally investigate the effect of subcooling on micro-mechanism of film boiling collapse behavior. As the results, it is experimentally clarified that the vapor film collapse behavior in low subcooling condition is qualitatively different from the vapor film collapse behavior in high subcooling condition. In case of vapor film collapse by pressure pulse, homogeneous vapor generation occurred all over the surface of steel particle in low subcooling condition. On the other hand, heterogeneous vapor generation was observed for higher subcooling condition. In case of vapor film collapse spontaneously, fluctuation of the gas-liquid interface after quenching propagated from bottom to top of the steel particle heterogeneously in low subcooling condition. On the other hand, simultaneous vapor generation occurred for higher subcooling condition. And the time transient of pressure, particle surface temperature, water temperature and visual information were simultaneously measured in the vapor film collapse experiment by external pressure pulse. Film thickness was estimated by visual data processing technique with the pictures taken by the high-speed video camera. Temperature and heat flux at the vapor-liquid interface were estimated by solving the heat condition equation with the measured pressure, liquid temperature and vapor film thickness as boundary conditions. Movement of the vapor-liquid interface were estimated with the PIV technique with the visual observation

  17. Dancing droplets: Autonomous surface tension-driven droplet motion

    OpenAIRE

    Cira, Nate J.; Benusiglio, Adrien; Prakash, Manu

    2014-01-01

    International audience; When droplets of water and food coloring at different concentrations are deposited on a clean glass slide they enter a complex dance. We reproduce this phenomenon by using a two-component mixture of propylene glycol and water deposited on corona treated (Electro-TechnicBD-20AC) glass slides and record the phenomena using a Cannon 5D Mark II camera with a 50mm macro lens

  18. Dynamics of Water Absorption and Evaporation During Methanol Droplet Combustion in Microgravity

    Science.gov (United States)

    Hicks, Michael C.; Dietrich, Daniel L.; Nayagam, Vedha; Williams, Forman A.

    2012-01-01

    The combustion of methanol droplets is profoundly influenced by the absorption and evaporation of water, generated in the gas phase as a part of the combustion products. Initially there is a water-absorption period of combustion during which the latent heat of condensation of water vapor, released into the droplet, enhances its burning rate, whereas later there is a water-evaporation period, during which the water vapor reduces the flame temperature suffciently to extinguish the flame. Recent methanol droplet-combustion experiments in ambient environments diluted with carbon dioxide, conducted in the Combustion Integrated Rack on the International Space Station (ISS), as a part of the FLEX project, provided a method to delineate the water-absorption period from the water-evaporation period using video images of flame intensity. These were obtained using an ultra-violet camera that captures the OH* radical emission at 310 nm wavelength and a color camera that captures visible flame emission. These results are compared with results of ground-based tests in the Zero Gravity Facility at the NASA Glenn Research Center which employed smaller droplets in argon-diluted environments. A simplified theoretical model developed earlier correlates the transition time at which water absorption ends and evaporation starts. The model results are shown to agree reasonably well with experiment.

  19. Evaporation and Vapor Formation of Graphite Suspensions Based on Water in a High-Temperature Gas Environment: an Experimental Investigation

    Directory of Open Access Journals (Sweden)

    Borisova Anastasia G.

    2016-01-01

    Full Text Available We performed an experimental research on evaporation and vapor formation of water droplets containing large (2 mm in size and small (0.05 mm and 0.2 mm in diameter graphite inclusions, when heated in a high-temperature gas environment. We applied a high-speed (up to 104 fps video recording to establish mechanisms of the processes considered. Moreover, we revealed the positive influence of addition of small graphite inclusions on intensifying the evaporation of heterogeneous suspension droplets. In addition, we made the assumption on the formation of vapor layer around the 10 and 15 μl suspension droplets, as well as its negative influence on the lifetimes of suspension droplets τh (increasing the times in a high-temperature gas environment.

  20. Collapsing criteria for vapor film around solid spheres as a fundamental stage leading to vapor explosion

    Energy Technology Data Exchange (ETDEWEB)

    Freud, Roy [Nuclear Research Center - Negev, Beer-Sheva (Israel)], E-mail: freud@bgu.ac.il; Harari, Ronen [Nuclear Research Center - Negev, Beer-Sheva (Israel); Sher, Eran [Pearlstone Center for Aeronautical Studies, Department of Mechanical Engineering, Ben-Gurion University, Beer-Sheva (Israel)

    2009-04-15

    Following a partial fuel-melting accident, a Fuel-Coolant Interaction (FCI) can result with the fragmentation of the melt into tiny droplets. A vapor film is then formed between the melt fragments and the coolant, while preventing a contact between them. Triggering, propagation and expansion typically follow the premixing stage. In the triggering stage, vapor film collapse around one or several of the fragments occurs. This collapse can be the result of fragments cooling, a sort of mechanical force, or by any other means. When the vapor film collapses and the coolant re-establishes contact with the dry surface of the hot melt, it may lead to a very rapid and rather violent boiling. In the propagation stage the shock wave front leads to stripping of the films surrounding adjacent droplets which enhance the fragmentation and the process escalates. During this process a large quantity of liquid vaporizes and its expansion can result in destructive mechanical damage to the surrounding structures. This multiphase thermal detonation in which high pressure shock wave is formed is regarded as 'vapor explosion'. The film boiling and its possible collapse is a fundamental stage leading to vapor explosion. If the interaction of the melt and the coolant does not result in a film boiling, no explosion occurs. Many studies have been devoted to determine the minimum temperature and heat flux that is required to maintain a film boiling. The present experimental study examines the minimum temperature that is required to maintain a film boiling around metal spheres immersed into a liquid (subcooled distilled water) reservoir. In order to simulate fuel fragments that are small in dimension and has mirror-like surface, small spheres coated with anti-oxidation layer were used. The heat flux from the spheres was calculated from the sphere's temperature profiles and the sphere's properties. The vapor film collapse was associated with a sharp rise of the heat flux

  1. Integrated microfluidic system capable of size-specific droplet generation with size-dependent droplet separation.

    Science.gov (United States)

    Lee, Sangmin; Hong, Seok Jun; Yoo, Hyung Jung; Ahn, Jae Hyun; Cho, Dong-il Dan

    2013-06-01

    Droplet-based microfluidics is receiving much attention in biomedical research area due to its advantage in uniform size droplet generation. Our previous results have reported that droplet size plays an important role in drug delivery actuated by flagellated bacteria. Recently, many research groups have been reported the size-dependent separation of emulsion droplets by a microfluidic system. In this paper, an integrated microfluidic system is proposed to produce and sort specificsized droplets sequentially. Operation of the system relies on two microfluidic transport processes: initial generation of droplets by hydrodynamic focusing and subsequent separation of droplets by a T-junction channel. The microfluidic system is fabricated by the SU-8 rapid prototyping method and poly-di-methyl-siloxane (PDMS) replica molding. A biodegradable polymer, poly-capro-lactone (PCL), is used for the droplet material. Using the proposed integrated microfluidic system, specific-sized droplets which can be delivered by flagellated bacteria are successfully generated and obtained.

  2. Indirect radiative forcing of aerosols via water vapor above non-precipitating maritime cumulus clouds

    Directory of Open Access Journals (Sweden)

    M. A. Pfeffer

    2011-10-01

    Full Text Available Aerosol-cloud-water vapor interactions in clean maritime air have been described for different aerosol sources using the WRF-Chem atmospheric model. The simulations were made over the Lesser Antilles in the region of the RICO measurement campaign where the clouds are low, patchy, typical trade-wind cumuli. In this very clean air, sea salt and DMS are found to have greater effects than anthropogenic pollution on the cloud droplets' effective radii and longwave and shortwave outgoing top of atmosphere radiation. The changes in radiation due to each aerosol source are a function of how each source influences aerosol concentration, cloud droplet number concentration, cloud droplet sizes, and water vapor concentration. Changes in outgoing shortwave radiation are due predominantly to changes in the clouds, followed by the direct aerosol effect which is about 2/3 as important, followed by the effects of water vapor which is in turn about 2/3 as important as the direct effect. Changes in outgoing longwave radiation are due predominantly to changes in the clouds, with changes in water vapor being about 1/10 as important. The simulated changes in water vapor concentration are due to the competing effects of aerosol particles being able to both enhance condensation of available water vapor and enhance evaporation of smaller droplets. These changes are independent of precipitation effects as there is essentially no drizzle in the domain. It is expected that the indirect radiative forcing of aerosols via water vapor may be stronger in dirtier and more strongly convective conditions.

  3. Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing.

    Science.gov (United States)

    Ly, Sonny; Rubenchik, Alexander M; Khairallah, Saad A; Guss, Gabe; Matthews, Manyalibo J

    2017-06-22

    The results of detailed experiments and finite element modeling of metal micro-droplet motion associated with metal additive manufacturing (AM) processes are presented. Ultra high speed imaging of melt pool dynamics reveals that the dominant mechanism leading to micro-droplet ejection in a laser powder bed fusion AM is not from laser induced recoil pressure as is widely believed and found in laser welding processes, but rather from vapor driven entrainment of micro-particles by an ambient gas flow. The physics of droplet ejection under strong evaporative flow is described using simulations of the laser powder bed interactions to elucidate the experimental results. Hydrodynamic drag analysis is used to augment the single phase flow model and explain the entrainment phenomenon for 316 L stainless steel and Ti-6Al-4V powder layers. The relevance of vapor driven entrainment of metal micro-particles to similar fluid dynamic studies in other fields of science will be discussed.

  4. A comparative study of the mass and heat transfer dynamics of evaporating ethanol/water, methanol/water, and 1-propanol/water aerosol droplets.

    Science.gov (United States)

    Hopkins, Rebecca J; Reid, Jonathan P

    2006-02-23

    The mass and heat transfer dynamics of evaporating multicomponent alcohol/water droplets have been probed experimentally by examining changes in the near surface droplet composition and average droplet temperature using cavity-enhanced Raman scattering (CERS) and laser-induced fluorescence (LIF). The CERS technique provides a sensitive measure of the concentration of the volatile alcohol component in the outer shell of the droplet, due to the exponential relationship between CERS intensity and species concentration. Such volatile droplets, which are probed on a millisecond time scale, evaporate nonisothermally, resulting in both temperature and concentration gradients, as confirmed by comparisons between experimental measurements and quasi-steady state model calculations. An excellent agreement between the experimental evaporation trends and quasi-steady state model predictions is observed. An unexpectedly slow evaporation rate is observed for the evaporation of 1-propanol from a multicomponent droplet when compared to the model; possible explanations for this observation are discussed. In addition, the propagation depth of the CERS signal, and, therefore, the region of the droplet from which compositional measurements are made, can be estimated. Such measurements, when considered in conjunction with quasi-steady state theory, can allow droplet temperature gradients to be measured and vapor pressures and activity coefficients of components within the droplet to be determined.

  5. Shape-Shifting Droplet Networks

    Science.gov (United States)

    Zhang, T.; Wan, Duanduan; Schwarz, J. M.; Bowick, M. J.

    2016-03-01

    We consider a three-dimensional network of aqueous droplets joined by single lipid bilayers to form a cohesive, tissuelike material. The droplets in these networks can be programed to have distinct osmolarities so that osmotic gradients generate internal stresses via local fluid flows to cause the network to change shape. We discover, using molecular dynamics simulations, a reversible folding-unfolding process by adding an osmotic interaction with the surrounding environment which necessarily evolves dynamically as the shape of the network changes. This discovery is the next important step towards osmotic robotics in this system. We also explore analytically and numerically how the networks become faceted via buckling and how quasi-one-dimensional networks become three dimensional.

  6. Walking droplets in confined geometries

    Science.gov (United States)

    Filoux, Boris; Mathieu, Olivier; Vandewalle, Nicolas

    2014-11-01

    When gently placing a droplet onto a vertically vibrated bath, coalescence may be avoided: the drop bounces permanently. Upon increasing forcing acceleration, a drop interacts with the wave it generates, and becomes a ``walker'' with a well defined velocity. In this work, we investigate the confinement of a walker in a mono-dimensional geometry. The system consists of linear submarine channels used as waveguides for a walker. By studying the dynamics of walkers in those channels, we discover some 1D-2D transition. We also propose a model based on an analogy with ``Quantum Wires.'' Finally, we consider the situation of a walker in a circular submarine channel, and examine the behavior of several walking droplets in this system. We show the quantization of the drop distances, and correlate it to their bouncing modes.

  7. Vapor-liquid equilibrium in electric field gradients.

    Science.gov (United States)

    Samin, Sela; Tsori, Yoav

    2011-01-13

    We investigate the vapor-liquid coexistence of polar and nonpolar fluids in the presence of a nonuniform electric field. We find that a large enough electric field can nucleate a gas bubble from the liquid phase or a liquid droplet from the vapor phase. The surface tension of the vapor-liquid interface is determined within squared-gradient theory. When the surface potential (charge) is controlled, the surface tension increases (decreases) compared to the zero-field interface. The effect of the electric field on the fluid phase diagram depends strongly on the constitutive relation for the dielectric constant. Finally, we show that gas bubbles can be nucleated far from the bounding surfaces.

  8. Alkali-vapor cell with metal coated windows for efficient application of an electric field

    Science.gov (United States)

    Sarkisyan, D.; Sarkisyan, A. S.; Guéna, J.; Lintz, M.; Bouchiat, M.-A.

    2005-05-01

    We describe the implementation of a cylindrical T-shaped alkali-vapor cell for laser spectroscopy in the presence of a longitudinal electric field. The two windows are used as two electrodes of the high-voltage assembly, which is made possible by a metallic coating which entirely covers the inner and outer sides of the windows except for a central area to let the laser beams in and out of the cell. This allows very efficient application of the electric field, up to 2kV/cm in a rather dense superheated vapor, even when significant photoemission takes place at the windows during pulsed laser irradiation. The body of the cell is made of sapphire or alumina ceramic to prevent large currents resulting from surface conduction observed in cesiated glass cells. The technique used to attach the monocrystalline sapphire windows to the cell body causes minimal stress birefringence in the windows. In addition, reflection losses at the windows can be made very small. The vapor cell operates with no buffer gas and has no magnetic part. The use of this kind of cell has resulted in an improvement of the signal-to-noise ratio in the measurement of parity violation in cesium vapor underway at ENS, Paris. The technique can be applied to other situations where a brazed assembly would give rise to unacceptably large birefringence in the windows.

  9. A Comparison of the Computation Times of Thermal Equilibrium and Non-equilibrium Models of Droplet Field in a Two-Fluid Three-Field Model

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ik Kyu; Cho, Heong Kyu; Kim, Jong Tae; Yoon, Han Young; Jeong, Jae Jun

    2007-12-15

    A computational model for transient, 3 dimensional 2 phase flows was developed by using 'unstructured-FVM-based, non-staggered, semi-implicit numerical scheme' considering the thermally non-equilibrium droplets. The assumption of the thermally equilibrium between liquid and droplets of previous studies was not used any more, and three energy conservation equations for vapor, liquid, liquid droplets were set up. Thus, 9 conservation equations for mass, momentum, and energy were established to simulate 2 phase flows. In this report, the governing equations and a semi-implicit numerical sheme for a transient 1 dimensional 2 phase flows was described considering the thermally non-equilibrium between liquid and liquid droplets. The comparison with the previous model considering the thermally non-equilibrium between liquid and liquid droplets was also reported.

  10. Moving contact lines in a pure-vapor atmosphere: a singularity-free description in the sole framework of classical physics

    CERN Document Server

    Rednikov, Alexey

    2012-01-01

    We here show that, even in the absence of "regularizing" microscopic effects (viz. slip at the wall or the disjoining pressure/precursor films), no singularities in fact arise for a moving contact line surrounded by the pure vapor of the liquid considered. There are no evaporation-related singularities either even should the substrate be superheated. We consider, within the lubrication approximation and a classical one-sided model, a contact line advancing/receding at a constant velocity, or immobile, and starting abruptly at a (formally) bare solid surface with a zero or finite contact angle.

  11. Modification of technological control units for superheated steam temperature at 210-MW power units of the Primor'ye Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    V.V. Slesarenko; A.A. Belousov; V.V. Milush [Far East State Engineering University, Vladivostok (Russian Federation)

    2008-06-15

    The results of analysis of operation of the temperature control system for superheated steam at the BKZ-670-140F boilers of the Primor'ye Power Plant (GRES) are presented. The possibility of updating of the injection system to improve the reliability and economic efficiency of power units of electric power plants is considered.

  12. Modification of technological control units for superheated steam temperature at 210-MW power units of the Primor'ye Power Plant

    Science.gov (United States)

    Slesarenko, V. V.; Belousov, A. A.; Milush, V. V.

    2008-06-01

    The results of analysis of operation of the temperature control system for superheated steam at the BKZ-670-140F boilers of the Primor’ye Power Plant (GRES) are presented. The possibility of updating of the injection system to improve the reliability and economic efficiency of power units of electric power plants is considered.

  13. Development of device for trapping a superheated liquid drop and life-time measurements of the drop by radiation-induced evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Sawamura, Teruko; Sugiyama, Noriyuki; Homma, Akira; Narita, Masakuni [Hokkaido Univ., Sapporo (Japan). Faculty of Engineering

    1999-08-01

    In this study a detection sensitivity evaluation was made by measuring the life time of a single liquid drop. A device trapping a superheated drop was developed, where a single drop of test liquid was trapped at a specified position and then irradiated. Therefore, the volume of the drop can be measured before the irradiation. Wakeshima originally developed the device, in which a test liquid drop was injected and superheated in a supporting liquid, to measure the limit of superheat of the liquid. Apfel modified Wakeshima's device by applying an acoustic field to be able to trap and decompress a superheated liquid drop. The device in the present study is similar to Apfel's. But the inlet part is cooled because the boiling point of the test liquid is lower than room temperature. In this device the superheated drop of trans-2-butene (C{sub 4}H{sub 8}, boiling point=0.8degC) was exposed to Am-Be neutrons and {sup 60}Co {gamma}-rays and its life time was measured. (author)

  14. Vortices catapult droplets in atomization

    Science.gov (United States)

    Jerome, J. John Soundar; Marty, Sylvain; Matas, Jean-Philippe; Zaleski, Stéphane; Hoepffner, Jérôme

    2013-11-01

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vortex; this reattached flow pushes the liquid film down; by now, a new recirculation vortex is being created in the wake of the wave—just where the liquid film is now located; the liquid film is blown up from below by the newly formed recirculation vortex in a manner similar to a bag-breakup event; the resulting droplets are catapulted by the recirculation vortex.

  15. Vortices catapult droplets in atomization

    Energy Technology Data Exchange (ETDEWEB)

    Jerome, J. John Soundar, E-mail: soundar@dalembert.upmc.fr; Zaleski, Stéphane; Hoepffner, Jérôme [Institut Jean Le Rond d' Alembert, UPMC Univ. Paris 06 and CNRS-UMR 7190, F-75005 Paris (France); Marty, Sylvain; Matas, Jean-Philippe [Laboratoire des Écoulements Géophysiques et Industriels (LEGI), Univ. Grenoble Alpes and CNRS - UMR 5519, F-38000 Grenoble (France)

    2013-11-15

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vortex; this reattached flow pushes the liquid film down; by now, a new recirculation vortex is being created in the wake of the wave—just where the liquid film is now located; the liquid film is blown up from below by the newly formed recirculation vortex in a manner similar to a bag-breakup event; the resulting droplets are catapulted by the recirculation vortex.

  16. Grating droplets with a mesh

    Science.gov (United States)

    Soto, Dan; Le Helloco, Antoine; Clanet, Cristophe; Quere, David; Varanasi, Kripa

    2016-11-01

    A drop thrown against a mesh can pass through its holes if impacting with enough inertia. As a result, although part of the droplet may remain on one side of the sieve, the rest will end up grated through the other side. This inexpensive method to break up millimetric droplets into micrometric ones may be of particular interest in a wide variety of applications: enhancing evaporation of droplets launched from the top of an evaporative cooling tower or preventing drift of pesticides sprayed above crops by increasing their initial size and atomizing them at the very last moment with a mesh. In order to understand how much liquid will be grated we propose in this presentation to start first by studying a simpler situation: a drop impacting a plate pierced with a single off centered hole. The study of the role of natural parameters such as the radius drop and speed or the hole position, size and thickness allows us to discuss then the more general situation of a plate pierced with multiple holes: the mesh.

  17. Dynamics of Electrically Modulated Colloidal Droplet Transport.

    Science.gov (United States)

    Dey, Ranabir; Ghosh, Udita Uday; Chakraborty, Suman; DasGupta, Sunando

    2015-10-20

    Electrically actuated transport dynamics of colloidal droplets, on a hydrophobic dielectric film covering an array of electrodes, is studied here. Specifically, the effects of the size and electrical properties (zeta-potential) of the colloidal particles on such transport characteristics are investigated. For the colloidal droplets, the application of an electrical voltage leads to additional attenuation of the local dielectric-droplet interfacial tension. This is due to the electrically triggered enhanced colloidal particle adsorption at the dielectric-droplet interface, in the immediate vicinity of the droplet three-phase contact line (TPCL). The extent of such interfacial particle adsorption, and hence, the extent of the consequential reduction in the interfacial tension, is dictated by the combined effects of the three-phase contact line spreading, particle size, the interfacial electrostatic interaction between the colloidal particles (if charged) and the charged dielectric surface above the activated electrode, and the interparticle electrostatic repulsion. The electrical driving force of varying magnitude, stemming from this altered solid-liquid interfacial tension gradient in the presence of the colloidal particles, culminates in different droplet transport velocity and droplet transfer frequency for different colloidal droplets. We substantiate the inferences from our experimental results by a quasi-steady state force balance model for colloidal droplet transport. We believe that the present work will provide an accurate framework for determining the optimal design and operational parameters for digital microfluidic chips handling colloidal droplets, as encountered in a plethora of applications.

  18. Compound droplet manipulations on fiber arrays

    Science.gov (United States)

    Weyer, Floriane; Lismont, Marjorie; Dreesen, Laurent; Vandewalle, Nicolas

    2014-11-01

    Recent works demonstrated that fibers are the basis of an open digital microfluidics. Indeed, various processes such as droplet motion, fragmentation, trapping, releasing, mixing and encapsulation can be constructed on fiber arrays. However, addressing a large number of tiny droplets resulting from the mixing of several liquid components is still a challenge. Here we show that it is possible to manipulate tiny droplets reaching a high level of complexity. Wetting droplets are known to glide along vertical fibers. When a droplet reaches an horizontal fiber, it sticks at the crossing if capillary overcomes gravity. Otherwise, the droplet continues its way, crosses the node and leaves a tiny residue. Therefore, a vertical fiber decorated with a series of horizontal fibers will retain residual droplets at the successive nodes. An oil droplet, sliding on the vertical fiber, is able to collect the residues. Thus a multicompound droplet is created. The volume of the residual droplets has been studied and seems to be related to the diameters of both vertical and horizontal fibers. Moreover, the conditions under which the residues are released have been investigated in order to understand the formation of such a fluidic object. F. Weyer is financially supported by an FNRS grant. This work is also supported by the FRFC 2.4504.12.

  19. Bouncing of polymeric droplets on liquid interfaces

    Science.gov (United States)

    Gier, S.; Dorbolo, S.; Terwagne, D.; Vandewalle, N.; Wagner, C.

    2012-12-01

    The effect of polymers on the bouncing behavior of droplets in a highly viscous, vertically shaken silicone oil bath was investigated in this study. Droplets of a sample liquid were carefully placed on a vibrating bath that was maintained well below the threshold of Faraday waves. The bouncing threshold of the plate acceleration depended on the acceleration frequency. For pure water droplets and droplets of aqueous polymer solutions, a minimum acceleration amplitude was observed in the acceleration threshold curves as a function of frequency. The bouncing acceleration amplitude for a droplet of a dilute aqueous polymer solution was higher than the acceleration amplitude for a pure water droplet. Measurements of the center of mass trajectory and the droplet deformations showed that the controlling parameter in the bouncing process was the oscillating elongational rate of the droplet. This parameter can be directly related to the elongational viscosity of the polymeric samples. The large elongational viscosity of the polymer solution droplets suppressed large droplet deformations, resulting in less chaotic bouncing.

  20. Impinging Water Droplets on Inclined Glass Surfaces.

    Energy Technology Data Exchange (ETDEWEB)

    Armijo, Kenneth Miguel; Lance, Blake; Ho, Clifford K.

    2017-09-01

    Multiphase computational models and tests of falling water droplets on inclined glass surfaces were developed to investigate the physics of impingement and potential of these droplets to self-clean glass surfaces for photovoltaic modules and heliostats. A multiphase volume-of-fluid model was developed in ANSYS Fluent to simulate the impinging droplets. The simulations considered different droplet sizes (1 mm and 3 mm), tilt angles (0deg, 10deg, and 45deg), droplet velocities (1 m/s and 3 m/s), and wetting characteristics (wetting=47deg contact angle and non-wetting = 93deg contact angle). Results showed that the spread factor (maximum droplet diameter during impact divided by the initial droplet diameter) decreased with increasing inclination angle due to the reduced normal force on the surface. The hydrophilic surface yielded greater spread factors than the hydrophobic surface in all cases. With regard to impact forces, the greater surface tilt angles yielded lower normal forces, but higher shear forces. Experiments showed that the experimentally observed spread factor (maximum droplet diameter during impact divided by the initial droplet diameter) was significantly larger than the simulated spread factor. Observed spread factors were on the order of 5 - 6 for droplet velocities of %7E3 m/s, whereas the simulated spread factors were on the order of 2. Droplets were observed to be mobile following impact only for the cases with 45deg tilt angle, which matched the simulations. An interesting phenomenon that was observed was that shortly after being released from the nozzle, the water droplet oscillated (like a trampoline) due to the "snapback" caused by the surface tension of the water droplet being released from the nozzle. This oscillation impacted the velocity immediately after the release. Future work should evaluate the impact of parameters such as tilt angle and surface wettability on the impact of particle/soiling uptake and removal to investigate ways that

  1. Modeling Droplet Heat and Mass Transfer during Spray Bar Pressure Control of the Multipurpose Hydrogen Test Bed (MHTB) Tank in Normal Gravity

    Science.gov (United States)

    Kartuzova, O.; Kassemi, M.

    2016-01-01

    A CFD model for simulating pressure control in cryogenic storage tanks through the injection of a subcooled liquid into the ullage is presented and applied to the 1g MHTB spray bar cooling experiments. An Eulerian-Lagrangian approach is utilized to track the spray droplets and capture the interaction between the discrete droplets and the continuous ullage phase. The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. A new model for calculating the droplet-ullage heat and mass transfer is developed. In this model, a droplet is allowed to warm up to the saturation temperature corresponding to the ullage vapor pressure, after which it evaporates while remaining at the saturation temperature. The droplet model is validated against the results of the MHTB spray-bar cooling experiments with 50% and 90% tank fill ratios. The predictions of the present T-sat based model are compared with those of a previously developed kinetic-based droplet mass transfer model. The predictions of the two models regarding the evolving tank pressure and temperature distributions, as well as the droplets' trajectories and temperatures, are examined and compared in detail. Finally, the ullage pressure and local vapor and liquid temperature evolutions are validated against the corresponding data provided by the MHTB spray bar mixing experiment.

  2. Vibration-induced droplet atomization

    Science.gov (United States)

    Vukasinovic, Bojan

    The atomization of liquid drops is investigated experimentally using laser vibrometry, high-speed imaging, and particle tracking techniques. The spray is generated by a novel vibration-induced droplet atomization (VIDA) process in which a sessile drop is atomized by an underlying vibrating thin metal diaphragm, resulting in rapid ejection of small secondary droplets from the free surface of the primary drop. Under some conditions, the primary drop can be atomized extremely rapidly by a bursting-like mechanism (e.g., a 0.1 ml water drop can be atomized in 0.4 seconds). The present research has focused on four major areas: global characteristics of VIDA process, instability modes and free surface dynamics of the forced drop, mechanisms of the interface breakup, and parametric characterization of the ensuing spray. Prior to atomization, the drop free surface undergoes three transitions: from axisymmetric standing waves to azimuthal waves, to a newly-observed lattice mode, and to a disordered pre-ejection state. The droplet ejection results from localized collapse of surface troughs and initiation and ultimate breakup of momentary liquid spikes. Breakup begins with capillary pinch-off from spike tips and can be followed by additional pinching of liquid droplets. For a relatively low-viscosity liquid, e.g., water, a capillary-wave instability of the spike is observed in some cases, while for a very viscous liquid, e.g., a glycerin/water solution, the first breakup occurs near the stem of the spike, with or without subsequent breakup of the detached, elongated thread. Different mechanisms dominating the primary breakup of the spike are operative in the low- and high-viscosity ejection regimes. When ejection of the secondary droplets is triggered, the evolution and rate of atomization depend on the coupled dynamics of the primary drop and the vibrating diaphragm. Due to these dynamics, the process can be either self-intensifying or self-decaying. The resulting VIDA spray

  3. Droplet size influences division of mammalian cell factories in droplet microfluidic cultivation.

    Science.gov (United States)

    Periyannan Rajeswari, Prem Kumar; Joensson, Haakan N; Andersson-Svahn, Helene

    2017-01-01

    The potential of using droplet microfluidics for screening mammalian cell factories has been limited by the difficulty in achieving continuous cell division during cultivation in droplets. Here, we report the influence of droplet size on mammalian cell division and viability during cultivation in droplets. Chinese Hamster Ovary (CHO) cells, the most widely used mammalian host cells for biopharmaceuticals production were encapsulated and cultivated in 33, 180 and 320 pL droplets for 3 days. Periodic monitoring of the droplets during incubation showed that the cell divisions in 33 pL droplets stopped after 24 h, whereas continuous cell division was observed in 180 and 320 pL droplets for 72 h. The viability of the cells cultivated in the 33 pL droplets also dropped to about 50% in 72 h. In contrast, the viability of the cells in the larger droplets was above 90% even after 72 h of cultivation, making them a more suitable droplet size for 72-h cultivation. This study shows a direct correlation of microfluidic droplet size to the division and viability of mammalian cells. This highlights the importance of selecting suitable droplet size for mammalian cell factory screening assays. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. [Micro-droplet characterization and its application for amino acid detection in droplet microfluidic system].

    Science.gov (United States)

    Yuan, Huiling; Dong, Libing; Tu, Ran; Du, Wenbin; Ji, Shiru; Wang, Qinhong

    2014-01-01

    Recently, the droplet microfluidic system attracts interests due to its high throughput and low cost to detect and screen. The picoliter micro-droplets from droplet microfluidics are uniform with respect to the size and shape, and could be used as monodispensed micro-reactors for encapsulation and detection of single cell or its metabolites. Therefore, it is indispensable to characterize micro-droplet and its application from droplet microfluidic system. We first constructed the custom-designed droplet microfluidic system for generating micro-droplets, and then used the micro-droplets to encapsulate important amino acids such as glutamic acid, phenylalanine, tryptophan or tyrosine to test the droplets' properties, including the stability, diffusivity and bio-compatibility for investigating its application for amino acid detection and sorting. The custom-designed droplet microfluidic system could generate the uniformed micro-droplets with a controllable size between 20 to 50 microm. The micro-droplets could be stable for more than 20 h without cross-contamination or fusion each other. The throughput of detection and sorting of the system is about 600 micro-droplets per minute. This study provides a high-throughput platform for the analysis and screening of amino acid-producing microorganisms.

  5. Quenching of a highly superheated porous medium by injection of water

    Science.gov (United States)

    Fichot, F.; Bachrata, A.; Repetto, G.; Fleurot, J.; Quintard, M.

    2012-11-01

    Understanding of two-phase flow through porous medium with intense phase change is of interest in many situations, including nuclear, chemical or geophysical applications. Intense boiling occurs when the liquid is injected into a highly superheated medium. Under such conditions, the heat flux extracted by the fluid from the porous medium is mainly governed by the nucleation of bubbles and by the evaporation of thin liquid films. Both configurations are possible, depending on local flow conditions and on the ratio of bubble size to pore size. The present study is motivated by the safety evaluation of light water nuclear reactors in case of a severe accident scenario, such as the one that happened in Fukushima Dai-ichi plant in March, 2011. If water sources are not available for a long period of time, the reactor core heats up due to the residual power and eventually becomes significantly damaged due to intense oxidation of metals and fragmentation of fuel rods resulting in the formation of a porous medium where the particles have a characteristic length-scale of 1 to 5 mm. The coolability of the porous medium will depend on the water flow rate which can enter the medium under the available driving head and on the geometrical features of the porous matrix (average pore size, porosity). Therefore, it is of high interest to evaluate the conditions for which the injection of water in such porous medium is likely to stop the progression of the accident. The present paper addresses the issue of modelling two-phase flow and heat transfers in a porous medium initially dry, where water is injected. The medium is initially at a temperature well above the saturation temperature of water. In a first part, a summary of existing knowledge is provided, showing the scarcity of models and experimental data. In a second part, new experimental results obtained in an IRSN facility are analysed. The experiment consists in a bed of steel particles that are heated up to 700

  6. Impact of Viscous Droplets on Superamphiphobic Surfaces

    Science.gov (United States)

    Zhao, Binyu; Chen, Longquan; Deng, Xu

    2016-11-01

    Superamphiphobic coating is promising for various applications in industry, e.g. self-cleaning windows, where the impingement of droplets on surfaces is commonly encountered. In this work, we experimentally investigated the impact of droplets with similar surface tension (63-72 mN/m) but much different viscosity (1-150 mPa s) on superamphiphobic surfaces. We found that droplets can rebound from the superamphiphobic surfaces when the impact velocity is larger than a critical value, which linearly increases with the liquid viscosity. Droplet with higher viscosity spreads, retracts slower, and eventually rebounds lower and fewer times than that of low viscous droplet. These findings have important implications for surface engineers to use superamphiphobic coatings. Furthermore, we measured the maximum spreading factors for droplet impact on superamphiphobic surfaces and proposed a simple model based on energy conversation to describe its relationship to the Weber number and Reynolds number.

  7. Electroporation of cells in microfluidic droplets.

    Science.gov (United States)

    Zhan, Yihong; Wang, Jun; Bao, Ning; Lu, Chang

    2009-03-01

    Droplet-based microfluidics has raised a lot of interest recently due to its wide applications to screening biological/chemical assays with high throughput. Despite the advances on droplet-based assays involving cells, gene delivery methods that are compatible with the droplet platform have been lacking. In this report, we demonstrate a simple microfluidic device that encapsulates cells into aqueous droplets and then electroporates the encapsulated cells. The electroporation occurs when the cell-containing droplets (in oil) flow through a pair of microelectrodes with a constant voltage established in between. We investigate the parameters and characteristics of the electroporation. We demonstrate delivering enhanced green fluorescent protein (EGFP) plasmid into Chinese hamster ovary (CHO) cells. We envision the application of this technique to high-throughput functional genomics studies based on droplet microfluidics.

  8. Curvature Gradient Driving Droplets in Fast Motion

    CERN Document Server

    Lv, Cunjing; Yin, Yajun; Tseng, Fan-gang; Zheng, Quanshui

    2011-01-01

    Earlier works found out spontaneous directional motion of liquid droplets on hydrophilic conical surfaces, however, not hydrophobic case. Here we show that droplets on any surface may take place spontaneous directional motion without considering contact angle property. The driving force is found to be proportional to the curvature gradient of the surface. Fast motion can be lead at surfaces with small curvature radii. The above discovery can help to create more effective transportation technology of droplets, and better understand some observed natural phenomena.

  9. Self-propelled chemotactic ionic liquid droplets

    OpenAIRE

    Francis, Wayne; Fay, Cormac; Florea, Larisa; Diamond, Dermot

    2015-01-01

    Herein we report the chemotactic behaviour of self-propelled droplets composed solely of the ionic liquid trihexyl(tetradecyl)phosphonium chloride ([P6,6,6,14][Cl]). These droplets spontaneously move along an aqueous-air boundary in the direction of chloride gradients to specific destinations due to asymmetric release of [P6,6,6,14]+ cationic surfactant from the droplet into the aqueous phase.

  10. Thermophoresis of water droplets inside carbon nanotubes

    DEFF Research Database (Denmark)

    Zambrano, Harvey; Walther, Jens Honore; Oyarzua, Elton

    2016-01-01

    Carbon Nanotubes(CNTs) offer unique possibilities as fluid conduits with applications ranging from lab on a chip devices to encapsulation media for drug delivery. CNTs feature high mechanical strength, chemical and thermalstability and biocompatibility therefore they are promising candidates...... for nanodevice fabrication. Thermal gradients have been proposed as mechanism to drive particles, fullerenes and droplets inside CNTs. Here, by conducting Molecular Dynamics (MD) simulations, we study thermophoresis of water droplets inside CNTs. We systematically change the size of the droplets, the axial...

  11. Droplets as reaction compartments for protein nanotechnology.

    Science.gov (United States)

    Devenish, Sean R A; Kaltenbach, Miriam; Fischlechner, Martin; Hollfelder, Florian

    2013-01-01

    Extreme miniaturization of biological and chemical reactions in pico- to nanoliter microdroplets is emerging as an experimental paradigm that enables more experiments to be carried out with much lower sample consumption, paving the way for high-throughput experiments. This review provides the protein scientist with an experimental framework for (a) formation of polydisperse droplets by emulsification or, alternatively, of monodisperse droplets using microfluidic devices; (b) construction of experimental rigs and microfluidic chips for this purpose; and (c) handling and analysis of droplets.

  12. Research of IGPC Control Strategy Based-on Hybrid Optimization for Power Station Boiler Superheated Steam Temperature

    Directory of Open Access Journals (Sweden)

    Benxian Xiao

    2014-01-01

    Full Text Available Implicit Generalized Predictive Control (IGPC algorithm can directly identify controller parameters without the need of solving Diophantine equation, thus can reduce the on-line algorithm computation time. In order to improve IGPC performance and extend its application, modified Particle Swarm Optimization (PSO algorithm is introduced into IGPC rolling horizon optimization, combined with general IGPC gradient optimization method under unconstrained condition, a new hybrid optimization method is obtained, this modified IGPC can be used to both of the non-constraint industry process control and the constraint industry process control. Aiming at the superheated steam temperature control of sub-critical 600MW boiler, a new cascade compound control strategy that combines an outer loop IGPC master adjuster and an inner loop PID auxiliary adjuster is adopted. Finally the simulation results have shown that the proposed method can constrain the control action, prevent dramatic change of the input signal, thus can achieve good static and dynamic performances.

  13. Influence of Superheated Steam Temperature Regulation Quality on Service Life of Boiler Steam Super-Heater Metal

    Directory of Open Access Journals (Sweden)

    G. T. Kulakov

    2009-01-01

    Full Text Available The paper investigates influence of change in quality of superheated steam temperature regulations on service life of super-heater metal. А dependence between metal service life and dispersion value for different steel grades has been determined in the paper. Numerical values pertaining to increase of super-heater metal service life in case of transferring from manual regulation to standard system of automatic regulation (SAR have been determined and in case of transferring from standard SAR to improved SAR. The analysis of tabular data and plotted dependencies makes it possible to conclude that any change in conditions of convection super-heater metal work due to better quality of the regulation leads to essential increase of time period which is left till the completion of the service life of a super-heater heating surface.

  14. Phase field simulation of kinetic superheating and melting of aluminum nanolayer irradiated by pico- and femtosecond laser

    Energy Technology Data Exchange (ETDEWEB)

    Seok Hwang, Yong [Department of Aerospace Engineering, Iowa State University, Ames, Iowa 50011 (United States); Levitas, Valery I. [Departments of Aerospace Engineering, Mechanical Engineering, and Material Science and Engineering, Iowa State University, Ames, Iowa 50011 (United States)

    2013-12-23

    Two melting mechanisms are reproduced and quantified for superheating and melting of Al nanolayer irradiated by pico- and femtosecond laser using the advanced phase-field approach coupled with mechanics and a two-temperature model. At heating rates Q≤79.04 K/ps induced by picosecond laser, two-sided barrierless surface melting forms two solid-melt interfaces, which meet near the center of a sample. The temperature for surface melting is a linear function, and for complete melting it is a cubic function, of logQ. At Q≥300 K/ps induced by femtosecond laser, barrierless and homogeneous melting (without nucleation) at the sample center occurs faster than due to interface propagation. Good agreement with experimental melting time was achieved in a range of 0.95≤Q≤1290 K/ps without fitting of material parameters.

  15. Evaporation of nanofluid droplet on heated surface

    Directory of Open Access Journals (Sweden)

    Yeung Chan Kim

    2015-04-01

    Full Text Available In this study, an experiment on the evaporation of nanofluid sessile droplet on a heated surface was conducted. A nanofluid of 0.5% volumetric concentration mixed with 80-nm-sized CuO powder and pure water were used for experiment. Droplet was applied to the heated surface, and images of the evaporation process were obtained. The recorded images were analyzed to find the volume, diameter, and contact angle of the droplet. In addition, the evaporative heat transfer coefficient was calculated from experimental result. The results of this study are summarized as follows: the base diameter of the droplet was maintained stably during the evaporation. The measured temperature of the droplet was increased rapidly for a very short time, then maintained constantly. The nanofluid droplet was evaporated faster than the pure water droplet under the experimental conditions of the same initial volume and temperature, and the average evaporative heat transfer coefficient of the nanofluid droplet was higher than that of pure water. We can consider the effects of the initial contact angle and thermal conductivity of nanofluid as the reason for this experimental result. However, the effect of surface roughness on the evaporative heat transfer of nanofluid droplet appeared unclear.

  16. Quantitative DNA Analysis Using Droplet Digital PCR.

    Science.gov (United States)

    Vossen, Rolf H A M; White, Stefan J

    2017-01-01

    Droplet digital PCR (ddPCR) is based on the isolated amplification of thousands of individual DNA molecules simultaneously, with each molecule compartmentalized in a droplet. The presence of amplified product in each droplet is indicated by a fluorescent signal, and the proportion of positive droplets allows the precise quantification of a given sequence. In this chapter we briefly outline the basis of ddPCR, and describe two different applications using the Bio-Rad QX200 system: genotyping copy number variation and quantification of Illumina sequencing libraries.

  17. Dissonant Black Droplets and Black Funnels

    CERN Document Server

    Fischetti, Sebastian; Way, Benson

    2016-01-01

    A holographic field theory on a fixed black hole background has a gravitational dual represented by a black funnel or a black droplet. These states are "detuned" when the temperature of the field theory near the horizon does not match the temperature of the background black hole. In particular, the gravitational dual to the Boulware state must be a detuned solution. We construct detuned droplets and funnels dual to a Schwarzschild background and show that the Boulware phase is represented by a droplet. We also construct hairy black droplets associated to a low-temperature scalar condensation instability and show that they are thermodynamically preferred to their hairless counterparts.

  18. Compound droplet manipulations on fiber arrays

    CERN Document Server

    Weyer, Floriane; Dreesen, Laurent; Vandewalle, Nicolas

    2015-01-01

    Recent works demonstrated that fiber arrays may constitue the basis of an open digital microfluidics. Various processes, such as droplet motion, fragmentation, trapping, release, mixing and encapsulation, may be achieved on fiber arrays. However, handling a large number of tiny droplets resulting from the mixing of several liquid components is still a challenge for developing microreactors, smart sensors or microemulsifying drugs. Here, we show that the manipulation of tiny droplets onto fiber networks allows for creating compound droplets with a high complexity level. Moreover, this cost-effective and flexible method may also be implemented with optical fibers in order to develop fluorescence-based biosensor.

  19. Interaction between electrically charged droplets in microgravity

    Science.gov (United States)

    Brandenbourger, Martin; Caps, Herve; Hardouin, Jerome; Vitry, Youen; Boigelot, Bernard; Dorbolo, Stephane; Grasp Team; Beams Collaboration

    2015-11-01

    The past ten years, electrically charged droplets have been studied tremendously for their applications in industry (electrospray, electrowetting,...). However, charged droplets are also present in nature. Indeed, it has been shown that the droplets falling from thunderclouds possess an excess of electric charges. Moreover, some research groups try to use the electrical interaction between drops in order to control the coalescence between cloud droplets and control rain generation. The common way to study this kind of system is to make hypothesis on the interaction between two charged drops. Then, these hypothesis are extended to a system of thousands of charged droplets. Thanks to microgravity conditions, we were able to study the interaction between two electrically charged droplets. In practice, the charged droplets were propelled one in front of the other at low speed (less than 1 m/s). The droplets trajectory is studied for various charges and volumes. The repulsion between two charged drops is correctly fitted by a simple Coulomb repulsion law. In the case of attractive interactions, we discuss the collisions observed as a function of the droplets speed, volume and electric charges. Thanks to FNRS for financial support.

  20. Liquid Droplets on a Highly Deformable Membrane

    Science.gov (United States)

    Schulman, Rafael; Dalnoki-Veress, Kari

    2015-11-01

    We present measurements of the deformation produced by micro-droplets atop thin elastomeric and glassy free-standing films. Due to the Laplace pressure, the droplets deform the elastic membrane thereby forming a bulge. Thus, there are two angles that define the droplet/membrane geometry: the angle the liquid surface makes with the film and the angle the deformed bulge makes with the film. The contact line geometry is well captured by a Neumann construction which includes contributions from interfacial and mechanical tensions. Finally, we show that a droplet atop a film with biaxial tension assumes an equilibrium shape which is elongated along the axis of high tension.

  1. Droplet evaporation with complexity of evaporation modes

    Science.gov (United States)

    Hwang, In Gyu; Kim, Jin Young; Weon, Byung Mook

    2017-01-01

    Evaporation of a sessile droplet often exhibits a mixed evaporation mode, where the contact radius and the contact angle simultaneously vary with time. For sessile water droplets containing polymers with different initial polymer concentrations, we experimentally study their evaporation dynamics by measuring mass and volume changes. We show how diffusion-limited evaporation governs droplet evaporation, regardless of the complexity of evaporation behavior, and how the evaporation rate depends on the polymer concentration. Finally, we suggest a unified expression for a diffusion-limited evaporation rate for a sessile droplet with complexity in evaporation dynamics.

  2. A Theory of Shape-Shifting Droplets

    Science.gov (United States)

    Haas, Pierre; Goldstein, Raymond; Smoukov, Stoyan; Denkov, Nikolai

    2016-11-01

    Recent observations of cooled oil emulsion droplets uncovered a remarkable array of shape transformations: the initially spherical droplets flatten into polygonal shapes, first hexagons, then triangles or quadrilaterals that ultimately grow thin protrusions from their corners. These transformations are driven by a partial phase transition of the bulk liquid phase. In this talk, we explore theoretically the simplest geometric competition between this phase transition and surface tension in planar polygons. We recover the experimental sequence of shapes and predict shape statistics in qualitative agreement with experiments. Extending the model to capture some of the three-dimensional structure of the droplets, we analyse the topological transition of droplet puncture observed in experiments.

  3. Stick-Jump (SJ) Evaporation of Strongly Pinned Nanoliter Volume Sessile Water Droplets on Quick Drying, Micropatterned Surfaces.

    Science.gov (United States)

    Debuisson, Damien; Merlen, Alain; Senez, Vincent; Arscott, Steve

    2016-03-22

    We present an experimental study of stick-jump (SJ) evaporation of strongly pinned nanoliter volume sessile water droplets drying on micropatterned surfaces. The evaporation is studied on surfaces composed of photolithographically micropatterned negative photoresist (SU-8). The micropatterning of the SU-8 enables circular, smooth, trough-like features to be formed which causes a very strong pinning of the three phase (liquid-vapor-solid) contact line of an evaporating droplet. This is ideal for studying SJ evaporation as it contains sequential constant contact radius (CCR) evaporation phases during droplet evaporation. The evaporation was studied in nonconfined conditions, and forced convection was not used. Micropatterned concentric circles were defined having an initial radius of 1000 μm decreasing by a spacing ranging from 500 to 50 μm. The droplet evaporates, successively pinning and depinning from circle to circle. For each pinning radius, the droplet contact angle and volume are observed to decrease quasi-linearly with time. The experimental average evaporation rates were found to decrease with decreasing pining radii. In contrast, the experimental average evaporation flux is found to increase with decreasing droplet radii. The data also demonstrate the influence of the initial contact angle on evaporation rate and flux. The data indicate that the total evaporation time of a droplet depends on the specific micropattern spacing and that the total evaporation time on micropatterned surfaces is always less than on flat, homogeneous surfaces. Although the surface patterning is observed to have little effect on the average droplet flux-indicating that the underlying evaporation physics is not significantly changed by the patterning-the total evaporation time is considerably modified by patterning, up to a factor or almost 2 compared to evaporation on a flat, homogeneous surface. The closely spaced concentric circle pinning maintains a large droplet radius and

  4. Parameterization of cloud droplet formation for global and regional models: including adsorption activation from insoluble CCN

    Directory of Open Access Journals (Sweden)

    P. Kumar

    2009-04-01

    Full Text Available Dust and black carbon aerosol have long been known to exert potentially important and diverse impacts on cloud droplet formation. Most studies to date focus on the soluble fraction of these particles, and overlook interactions of the insoluble fraction with water vapor (even if known to be hydrophilic. To address this gap, we developed a new parameterization that considers cloud droplet formation within an ascending air parcel containing insoluble (but wettable particles externally mixed with aerosol containing an appreciable soluble fraction. Activation of particles with a soluble fraction is described through well-established Köhler theory, while the activation of hydrophilic insoluble particles is treated by "adsorption-activation" theory. In the latter, water vapor is adsorbed onto insoluble particles, the activity of which is described by a multilayer Frenkel-Halsey-Hill (FHH adsorption isotherm modified to account for particle curvature. We further develop FHH activation theory to i find combinations of the adsorption parameters AFHH, BFHH which yield atmospherically-relevant behavior, and, ii express activation properties (critical supersaturation that follow a simple power law with respect to dry particle diameter.

    The new parameterization is tested by comparing the parameterized cloud droplet number concentration against predictions with a detailed numerical cloud model, considering a wide range of particle populations, cloud updraft conditions, water vapor condensation coefficient and FHH adsorption isotherm characteristics. The agreement between parameterization and parcel model is excellent, with an average error of 10% and R2~0.98. A preliminary sensitivity study suggests that the sublinear response of droplet number to Köhler particle concentration is not as strong for FHH particles.

  5. Parameterization of cloud droplet formation for global and regional models: including adsorption activation from insoluble CCN

    Science.gov (United States)

    Kumar, P.; Sokolik, I. N.; Nenes, A.

    2009-04-01

    Dust and black carbon aerosol have long been known to exert potentially important and diverse impacts on cloud droplet formation. Most studies to date focus on the soluble fraction of these particles, and overlook interactions of the insoluble fraction with water vapor (even if known to be hydrophilic). To address this gap, we developed a new parameterization that considers cloud droplet formation within an ascending air parcel containing insoluble (but wettable) particles externally mixed with aerosol containing an appreciable soluble fraction. Activation of particles with a soluble fraction is described through well-established Köhler theory, while the activation of hydrophilic insoluble particles is treated by "adsorption-activation" theory. In the latter, water vapor is adsorbed onto insoluble particles, the activity of which is described by a multilayer Frenkel-Halsey-Hill (FHH) adsorption isotherm modified to account for particle curvature. We further develop FHH activation theory to i) find combinations of the adsorption parameters AFHH, BFHH which yield atmospherically-relevant behavior, and, ii) express activation properties (critical supersaturation) that follow a simple power law with respect to dry particle diameter. The new parameterization is tested by comparing the parameterized cloud droplet number concentration against predictions with a detailed numerical cloud model, considering a wide range of particle populations, cloud updraft conditions, water vapor condensation coefficient and FHH adsorption isotherm characteristics. The agreement between parameterization and parcel model is excellent, with an average error of 10% and R2~0.98. A preliminary sensitivity study suggests that the sublinear response of droplet number to Köhler particle concentration is not as strong for FHH particles.

  6. Droplet dynamics on patterned substrates

    Indian Academy of Sciences (India)

    A Dupuis; J M Yeomans

    2005-06-01

    We present a lattice Boltzmann algorithm which can be used to explore the spreading of droplets on chemically and topologically patterned substrates. As an example we use the method to show that the final configuration of a drop on a substrate comprising hydrophobic and hydrophilic stripes can depend sensitively on the dynamical pathway by which the state is reached. We also consider a substrate covered with micron-scale posts and investigate how this can lead to superhydrophobic behaviour. Finally we model how a Namibian desert beetle collects water from the wind.

  7. AMTEC vapor-vapor series connected cells

    Science.gov (United States)

    Underwood, Mark L.; Williams, Roger M.; Ryan, Margaret A.; Nakamura, Barbara J.; Oconnor, Dennis E.

    1995-08-01

    An alkali metal thermoelectric converter (AMTEC) having a plurality of cells structurally connected in series to form a septum dividing a plenum into two chambers, and electrically connected in series, is provided with porous metal anodes and porous metal cathodes in the cells. The cells may be planar or annular, and in either case a metal alkali vapor at a high temperature is provided to the plenum through one chamber on one side of the wall and returned to a vapor boiler after condensation at a chamber on the other side of the wall in the plenum. If the cells are annular, a heating core may be placed along the axis of the stacked cells. This arrangement of series-connected cells allows efficient generation of power at high voltage and low current.

  8. Droplet evolution in expanding flow of warm dense matter

    CERN Document Server

    Armijo, Julien; 10.1103/PhysRevE.83.051507

    2011-01-01

    We propose a simple, self-consistent kinetic model for the evolution of a mixture of droplets and vapor expanding adiabatically in vacuum after rapid, almost isochoric heating. We study the evolution of the two-phase fluid at intermediate times between the molecular and the hydrodynamic scales, focusing on out-of-equilibrium and surface effects. We use the van der Waals equation of state as a test bed to implement our model and study the phenomenology of the upcoming second neutralized drift compression experiment (NDCX-II) at Lawrence Berkeley National Laboratory (LBNL) that uses ion beams for target heating.We find an approximate expression for the temperature difference between the droplets and the expanding gas and we check it with numerical calculations. The formula provides a useful criterion to distinguish the thermalized and nonthermalized regimes of expansion. In the thermalized case, the liquid fraction grows in a proportion that we estimate analytically, whereas, in case of too rapid expansion, a s...

  9. Gasoline Vapor Recovery

    Science.gov (United States)

    1979-01-01

    Gasoline is volatile and some of it evaporates during storage, giving off hydrocarbon vapor. Formerly, the vapor was vented into the atmosphere but anti-pollution regulations have precluded that practice in many localities, so oil companies and storage terminals are installing systems to recover hydrocarbon vapor. Recovery provides an energy conservation bonus in that most of the vapor can be reconverted to gasoline. Two such recovery systems are shown in the accompanying photographs (mid-photo at right and in the foreground below). They are actually two models of the same system, although.configured differently because they are customized to users' needs. They were developed and are being manufactured by Edwards Engineering Corporation, Pompton Plains, New Jersey. NASA technological information proved useful in development of the equipment.

  10. Gasoline Reid Vapor Pressure

    Science.gov (United States)

    EPA regulates the vapor pressure of gasoline sold at retail stations during the summer ozone season to reduce evaporative emissions from gasoline that contribute to ground-level ozone and diminish the effects of ozone-related health problems.

  11. Vapor Control Layer Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-09-08

    This information sheet describes the level of vapor control required on the interior side of framed walls with typical fibrous cavity insulation (fibreglass, rockwool, or cellulose, based on DOE climate zone of construction.

  12. The epididymis, cytoplasmic droplets and male fertility

    Institute of Scientific and Technical Information of China (English)

    Trevor G Cooper

    2011-01-01

    The potential of spermatozoa to become motile during post-testicular maturation,and the relationship between the cytoplasmic droplet and fertilizing capacity are reviewed.Post-testicular maturation of spermatozoa involves the autonomous induction of motility,which can occur in vivo in testes with occluded excurrent ducts and in vitro in testicular explants,and artefactual changes in morphology that appear to occur in the testis in vitro.Both modifications may reflect time-dependent oxidation of disulphide bonds of head and tail proteins.Regulatory volume decrease(RVD),which counters sperm swelling at ejaculation,is discussed in relation to loss of cytoplasmic droplets and consequences for fertility.It is postulated that:(i)fertile males possess spermatozoa with sufficient osmolytes to drive RVD at ejaculation,permitting the droplet to round up and pinch off without membrane rupture; and(ⅱ)infertile males possess spermatozoa with insufficient osmolytes so that RVD is inadequate,the droplet swells and the resulting flagellar angulation prevents droplet loss.Droplet retention at ejaculation is a harbinger of infertility caused by failure of the spermatozoon to negotiate the uterotubal junction or mucous and reach the egg.In this hypothesis,the epididymis regulates fertility indirectly by the extent of osmolyte provision to spermatozoa,which influences RVD and therefore droplet loss.Man is an exception,because ejaculated human spermatozoa retain their droplets.This may reflect their short midpiece,approximating head length,permitting a swollen droplet to extend along the entire midpiece; this not only obviates droplet migration and flagellar angulation but also hampers droplet loss.

  13. Study of the fluence dependent interplay between laser induced material removal mechanisms in metals: Vaporization, melt displacement and melt ejection

    Energy Technology Data Exchange (ETDEWEB)

    Fishburn, J.M. [Centre for Lasers and Applications, Department of Physics, Macquarie University, Sydney 2109 (Australia); Withford, M.J. [Centre for Lasers and Applications, Department of Physics, Macquarie University, Sydney 2109 (Australia)]. E-mail: withford@ics.mq.edu.au; Coutts, D.W. [Centre for Lasers and Applications, Department of Physics, Macquarie University, Sydney 2109 (Australia); Clarendon Laboratory, Department of Physics, University of Oxford, Oxford OX1 3PU (United Kingdom); Piper, J.A. [Centre for Lasers and Applications, Department of Physics, Macquarie University, Sydney 2109 (Australia)

    2006-05-15

    Three quantitative methods, namely profilometry, high speed imaging and recoil momentum measurements using a ballistic pendulum, are used to determine the interplay of vaporization, melt displacement and melt ejection on nanosecond laser induced material removal. At low to moderate fluences (<7 J cm{sup -2}) material removal occurs via vaporization and melt displacement in aluminium. At high fluences (>7 J cm{sup -2}), material removal occurs predominantly via the explosive ejection of liquid droplets from the melt pool.

  14. Vortices catapult droplets in atomization

    CERN Document Server

    Jerome, J John Soundar; Matas, Jean-Philippe; Zaleski, Stéphane; Hoepffner, Jérôme

    2016-01-01

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vor...

  15. The Statistical Theory of Relaxation and the Metastable Vapor.

    Science.gov (United States)

    Kellerman, Peter L.

    A generalization to equilibrium statistical thermodynamics is proposed, capable of describing the relaxation of a system to its equilibrium state. This theory, referred to as the "statistical theory of relaxation" (STR), is centered around a macroscopic diffusion equation, which involves a fluctuating entropy, as well as certain "diffusion constants". Although STR is a phenomenological theory, an underlying microscopic picture is presented as well, which "enriches" STR by suggesting a microscopic prescription for the entropy and symmetry conditions on the diffusion constants. An H-theorem also is proved, which places additional "irreversibility conditions" on the diffusion constants, and which can be interpreted as a statistical generalization to the entropy-production theorem of non-equilibrium thermodynamics. STR is employed to describe the statistical collapse (through nucleation) of a metastable vapor. Two mechanisms are proposed: "nucleation through liquid growth" (NLG), whereby a liquid droplet fluctuates past a critical size, and "nucleation through vapor collapse" (NVC), whereby a quantity of vapor larger than the critical size, homogeneously fluctuates to its liquid state. Both mechanisms contribute to the collapse of the metastable vapor state. It is found that for shallow "quenches", NLG predominates, yielding results similar to classical nucleation theory, although with certain differences in the "prefactor terms". For deep quenches, it is found that NVC predominates, yielding the result that the lifetime of the metastable state goes to zero (exactly) at the spinodal point. This confirms the notion of the spinodal point being the absolute limit to the metastable state, and also is consistent with the results of other approaches that predict the appearance of "ramified" droplets in deep quenches. The nucleation rate (as a function of temperature and time) is calculated with the aid of a computer for water vapor, yielding results in excellent agreement

  16. Research on steam-supply performance of ship micro-superheated steam generating system%船舶微过热蒸汽发生系统供汽性能研究

    Institute of Scientific and Technical Information of China (English)

    杨元龙

    2016-01-01

    In order to improve ship micro-superheated steam generating system stability and optimize its performance parameters, the micro-superheated steam generating system steam-supply response characteristic under the steady and transient state will be cleared. The ship micro-superheated steam generating system was taken as the mechanism model herein. The steady characteristics of velocity pressure, and temperature field for micro-superheated steam generating system were calculated by method of CFD simulation. The boundary conditions were introduced to treat as actual operating parameters of this system. The dynamic simulation study on micro-superheated steam generating system steam-supply response characteristic was carried out. The key parameters distributions of saturated and superheated steam mixing massflow, micro-superheated steam pressure and temperature were obtained. Meanwhile, the micro-superheated steam mixing factor was proposed, which could express quantificationally micro-superheated steam generating system mixing characteristics and effects of micro-superheated steam temperature. The calculated results showed that the pressure drop of saturated steam was higher than one of superheated steam. The micro-superheated steam pressure reduced gradually, leading to larger saturated and superheated steam massflow. These caused micro-superheated steam mixing factor to reduce, which resulted in that the micro-superheated steam temperature reduced slightly. Based on the analysis of the micro-superheated steam generating system steam-supply performance parameters, it could satisfy demand for equipment performance. These could be used to design ship steam power system.%为提高船舶微过热蒸汽发生系统的稳定性和优化微过热系统性能参数,探析稳态、动态工况下微过热蒸汽发生系统供汽响应特性。本文以船舶微过热蒸汽发生系统为机理模型,采用 CFD模拟方法计算了微过热蒸汽发生系统速度场、压

  17. Forces Acting on Sessile Droplet on Inclined Surfaces

    OpenAIRE

    Annapragada, S. Ravi; Murthy, Jayathi Y.; Garimella, Suresh V.

    2009-01-01

    Although many analytical, experimental and numerical studies have focused on droplet motion, the mechanics of the droplet while still in its static state, and just before motion starts, are not well understood. A study of static droplets would shed light on the threshold voltage (or critical inclination) for initiating electrically (or gravitationally) induced droplet motion. Before the droplet starts to move, the droplet shape changes such that the forces acting at the triple contact line ba...

  18. Driving Droplets by Curvi-Propulsion

    CERN Document Server

    Lv, Cunjing; Chuang, Yin-Chuan; Tseng, Fan-Gang; Yin, Yajun; Grey, Francois; Zheng, Quanshui

    2012-01-01

    How to make small liquid droplets move spontaneously and directionally on solid surfaces is a challenge in lab-on-chip technologies, DNA analysis, and heat exchangers. The best-known mechanism, a wettability gradient, does not move droplets rapidly enough for most purposes and cannot move droplets smaller than a critical size defined by the contact angle hysteresis. Here we report on a mechanism using curvature gradients, which we show is particularly effective at accelerating small droplets, and works for both hydrophilic and hydrophobic surfaces. Experiments for water droplets on glass cones in the sub-millimeter range show a maximum speed of 0.28 m/s, two orders of magnitude higher than obtained by wettability gradient. From simple considerations of droplet surface area change, we show that the force exerted on a droplet on a conical surface scales as the curvature gradient. This force therefore diverges for small droplets near the tip of a cone. We illustrate this using molecular dynamics simulations, and...

  19. Dynamic Morphologies of Microscale Droplet Interface Bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Mruetusatorn, Prachya [ORNL; Boreyko, Jonathan B [ORNL; Sarles, Stephen A [ORNL; Venkatesan, Guru [The University of Tennessee; Hayes, Douglas G [ORNL; Collier, Pat [ORNL

    2014-01-01

    Droplet interface bilayers (DIBs) are a powerful platform for studying the dynamics of synthetic cellular membranes; however, very little has been done to exploit the unique dynamical features of DIBs. Here, we generate microscale droplet interface bilayers ( DIBs) by bringing together femtoliter-volume water droplets in a microfluidic oil channel, and characterize morphological changes of the DIBs as the droplets shrink due to evaporation. By varying the initial conditions of the system, we identify three distinct classes of dynamic morphology. (1) Buckling and Fission: When forming DIBs using the lipid-out method (lipids in oil phase), lipids in the shrinking monolayers continually pair together and slide into the bilayer to conserve their mass. As the bilayer continues to grow, it becomes confined, buckles, and eventually fissions one or more vesicles. (2) Uniform Shrinking: When using the lipid-in method (lipids in water phase) to form DIBs, lipids uniformly transfer from the monolayers and bilayer into vesicles contained inside the water droplets. (3) Stretching and Unzipping: Finally, when the droplets are pinned to the wall(s) of the microfluidic channel, the droplets become stretched during evaporation, culminating in the unzipping of the bilayer and droplet separation. These findings offer a better understanding of the dynamics of coupled lipid interfaces.

  20. Exotic states of bouncing and walking droplets

    DEFF Research Database (Denmark)

    Wind-Willassen, Øistein; Moláček, Jan; Harris, Daniel M.;

    2013-01-01

    We present the results of an integrated experimental and theoretical investigation of droplets bouncing on a vibrating fluid bath. A comprehensive series of experiments provides the most detailed characterisation to date of the system's dependence on fluid properties, droplet size, and vibrationa...